A manual-control approach to development of VTOL automatic landing technology.

Science.gov (United States)

Kelly, J. R.; Niessen, F. R.; Garren, J. F., Jr.

1973-01-01

The operation of VTOL aircraft in the city-center environment will require complex landing-approach trajectories that insure adequate clearance from other traffic and obstructions and provide the most direct routing for efficient operations. As part of a larger program to develop the necessary technology base, a flight investigation was undertaken to study the problems associated with manual and automatic control of steep, decelerating instrument approaches and landings. The study employed a three-cue flight director driven by control laws developed and refined during manual-control studies and subsequently applied to the automatic approach problem. The validity of this approach was demonstrated by performing the first automatic approach and landings to a predetermined spot ever accomplished with a helicopter. The manual-control studies resulted in the development of a constant-attitude deceleration profile and a low-noise navigation system.

Teaching with technology: automatically receiving information from the internet and web.

Science.gov (United States)

Wink, Diane M

2010-01-01

In this bimonthly series, the author examines how nurse educators can use the Internet and Web-based computer technologies such as search, communication, and collaborative writing tools, social networking and social bookmarking sites, virtual worlds, and Web-based teaching and learning programs. This article presents information and tools related to automatically receiving information from the Internet and Web.

A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP

Directory of Open Access Journals (Sweden)

A. V. Voloshko

2016-11-01

Full Text Available Purpose. Propose a method of automatic determination of the number of operating high voltage electric motors in the group of the same type based on the determination and analysis of the account data of power consumption, obtained from of electric power meters installed at the connection of motors. Results. The algorithm of the automatic determination program for the number of working in the same group of electric motors, which is based on the determination of the motor power minimum value at which it is considered on, was developed. Originality. For the first time a method of automatic determination of the number of working of the same type high-voltage motors group was proposed. Practical value. Obtained results may be used for the introduction of an automated accounting run of each motor, calculating the parameters of the equivalent induction motor or a synchronous motor.

DISTURBANCE ERROR INVARIANCE IN AUTOMATIC CONTROL SYSTEMS FOR TECHNOLOGICAL OBJECT TRAJECTORY MOVEMENT

Directory of Open Access Journals (Sweden)

A. V. Lekareva

2016-09-01

Full Text Available We consider combined control in automatic control systems for technological objects trajectory movements. We present research results of the system disturbance invariance ensuring on the example of the technological manipulator that implements hydrocutting of the oil pipelines. Control is based on the propositions of the fourth modified invariance form with the use of bootstrapping methods. The paper presents analysis of results obtained by two different correction methods. The essence of the first method lies in injection of additional component into the already established control signal and formation of the channel for that component. Control signal correction during the signal synthesis stage in the control device constitutes the basis for the second method. Research results have shown high efficiency of application for both correction methods. Both methods have roughly the same precision. We have shown that the correction in the control device is preferable because it has no influence on the inner contour of the system. We have shown the necessity of the block usage with the variable transmission coefficient, which value is determined by technological trajectory parameters. Research results can be applied in practice for improvement of the precision specifications of automatic control systems for trajectorial manipulators.

The Effectiveness of Mindfulness-Based Cognitive Group Therapy in Reducing Negative Automatic Thoughts and Dysfunctional Attitudes in Cancer Patients

Directory of Open Access Journals (Sweden)

Fatemeh Mehdipour

2017-06-01

Full Text Available Background This study aimed to evaluate the effectiveness of mindfulness-based cognitive group therapy (MBCT in reducing negative automatic thoughts and dysfunctional attitudes in cancer patients. Methods The study was an applied and quasi-experimental research conducted by pre- and post-testing. The sample consisted of 30 cancer patients selected by purposive sampling and randomly placed in the control and the experimental group (15 individuals per group. The members of both groups filled out the automatic thoughts questionnaire (ATQ and the dysfunctional attitudes scale (DAS-26 at the pre- and the post-test stage. The collected data were analyzed by the SPSS software and multivariate analysis of covariance (MANCOVA tests. Results The results indicated that MBCT significantly reduced negative automatic thoughts (F = 126.15, P < 0.01 and dysfunctional attitudes (F = 179.53, P < 0.01 in the experimental group at the post-test stage in comparison to the control group. Conclusions Based on the results of this study, it is essential that therapeutic centers and support forums related to patients with refractory disorders use MBCT in their programs for reducing negative automatic thoughts and dysfunctional attitudes.

Sensible organizations: technology and methodology for automatically measuring organizational behavior.

Science.gov (United States)

Olguin Olguin, Daniel; Waber, Benjamin N; Kim, Taemie; Mohan, Akshay; Ara, Koji; Pentland, Alex

2009-02-01

We present the design, implementation, and deployment of a wearable computing platform for measuring and analyzing human behavior in organizational settings. We propose the use of wearable electronic badges capable of automatically measuring the amount of face-to-face interaction, conversational time, physical proximity to other people, and physical activity levels in order to capture individual and collective patterns of behavior. Our goal is to be able to understand how patterns of behavior shape individuals and organizations. By using on-body sensors in large groups of people for extended periods of time in naturalistic settings, we have been able to identify, measure, and quantify social interactions, group behavior, and organizational dynamics. We deployed this wearable computing platform in a group of 22 employees working in a real organization over a period of one month. Using these automatic measurements, we were able to predict employees' self-assessments of job satisfaction and their own perceptions of group interaction quality by combining data collected with our platform and e-mail communication data. In particular, the total amount of communication was predictive of both of these assessments, and betweenness in the social network exhibited a high negative correlation with group interaction satisfaction. We also found that physical proximity and e-mail exchange had a negative correlation of r = -0.55 (p 0.01), which has far-reaching implications for past and future research on social networks.

Group technology

International Nuclear Information System (INIS)

Rome, C.P.

1976-01-01

Group Technology has been conceptually applied to the manufacture of batch-lots of 554 machined electromechanical parts which now require 79 different types of metal-removal tools. The products have been grouped into 7 distinct families which require from 8 to 22 machines in each machine-cell. Throughput time can be significantly reduced and savings can be realized from tooling, direct-labor, and indirect-labor costs

A survey on the automatic object tracking technology using video signals

International Nuclear Information System (INIS)

Lee, Jae Cheol; Jun, Hyeong Seop; Choi, Yu Rak; Kim, Jae Hee

2003-01-01

Recently, automatic identification and tracking of the object are actively studied according to the rapid development of signal processing and vision technology using improved hardware and software. The object tracking technology can be applied to various fields such as road watching of the vehicles, weather satellite, traffic observation, intelligent remote video-conferences and autonomous mobile robots. Object tracking system receives subsequent pictures from the camera and detects motions of the objects in these pictures. In this report, we investigate various object tracking techniques such as brightness change using histogram characteristic, differential image analysis, contour and feature extraction, and try to find proper methods that can be used to mobile robots actually

Automatic summary generating technology of vegetable traceability for information sharing

Science.gov (United States)

Zhenxuan, Zhang; Minjing, Peng

2017-06-01

In order to solve problems of excessive data entries and consequent high costs for data collection in vegetable traceablility for farmers in traceability applications, the automatic summary generating technology of vegetable traceability for information sharing was proposed. The proposed technology is an effective way for farmers to share real-time vegetable planting information in social networking platforms to enhance their brands and obtain more customers. In this research, the influencing factors in the vegetable traceablility for customers were analyzed to establish the sub-indicators and target indicators and propose a computing model based on the collected parameter values of the planted vegetables and standard legal systems on food safety. The proposed standard parameter model involves five steps: accessing database, establishing target indicators, establishing sub-indicators, establishing standard reference model and computing scores of indicators. On the basis of establishing and optimizing the standards of food safety and traceability system, this proposed technology could be accepted by more and more farmers and customers.

Using RFID Positioning Technology to Construct an Automatic Rehabilitation Scheduling Mechanism.

Science.gov (United States)

Wang, Ching-Sheng; Hung, Lun-Ping; Yen, Neil Y

2016-01-01

Accurately and efficiently identifying the location of patients during the course of rehabilitation is an important issue. Wireless transmission technology can reach this goal. Tracking technologies such as RFID (Radio frequency identification) can support process improvement and improve efficiencies of rehabilitation. There are few published models or methods to solve the problem of positioning and apply this technology in the rehabilitation center. We propose a mechanism to enhance the accuracy of positioning technology and provide information about turns and obstacles on the path; and user-centered services based on location-aware to enhanced quality care in rehabilitation environment. This paper outlines the requirements and the role of RFID in assisting rehabilitation environment. A prototype RFID hospital support tool is established. It is designed to provide assistance for monitoring rehabilitation patients. It can simultaneously calculate the rehabilitant's location and the duration of treatment, and automatically record the rehabilitation course of the rehabilitant, so as to improve the management efficiency of the rehabilitation program.

Explosive Technology Group

Data.gov (United States)

Federal Laboratory Consortium — The Explosive Technology Group (ETG) provides diverse technical expertise and an agile, integrated approach to solve complex challenges for all classes of energetic...

Managing Returnable Containers Logistics - A Case Study Part II - Improving Visibility through Using Automatic Identification Technologies

Directory of Open Access Journals (Sweden)

Gretchen Meiser

2011-05-01

Full Text Available This case study is the result of a project conducted on behalf of a company that uses its own returnable containers to transport purchased parts from suppliers. The objective of this project was to develop a proposal to enable the company to more effectively track and manage its returnable containers. The research activities in support of this project included (1 the analysis and documentation of the physical flow and the information flow associated with the containers and (2 the investigation of new technologies to improve the automatic identification and tracking of containers. This paper explains the automatic identification technologies and important criteria for selection. A companion paper details the flow of information and containers within the logistics chain, and it identifies areas for improving the management of the containers.

Strategic planning of developing automatic optical inspection (AOI) technologies in Taiwan

International Nuclear Information System (INIS)

Fan, K C; Hsu, C

2005-01-01

In most domestic hi-tech industries in Taiwan, the automatic optical inspection (AOI) equipment is mostly imported. In view of the required specifications, AOI consists of the integration of mechanical-electrical-optical-information technologies. In the past two decades, traditional industries have lost their competitiveness due to the low profit rate. It is possible to promote a new AOI industry in Taiwan through the integration of its strong background in mechatronic technology in positioning stages with the optical image processing techniques. The market requirements are huge not only in domestic need but also in global need. This is the main reason to promote the AOI research for the coming years in Taiwan. Focused industrial applications will be in IC, PCB, LCD, communication, and MEMS parts. This paper will analyze the domestic and global AOI equipment market, summarize the necessary fish bone technology diagrams, survey the actual industrial needs, and propose the strategic plan to be promoted in Taiwan

Strategic planning of developing automatic optical inspection (AOI) technologies in Taiwan

Science.gov (United States)

Fan, K. C.; Hsu, C.

2005-01-01

In most domestic hi-tech industries in Taiwan, the automatic optical inspection (AOI) equipment is mostly imported. In view of the required specifications, AOI consists of the integration of mechanical-electrical-optical-information technologies. In the past two decades, traditional industries have lost their competitiveness due to the low profit rate. It is possible to promote a new AOI industry in Taiwan through the integration of its strong background in mechatronic technology in positioning stages with the optical image processing techniques. The market requirements are huge not only in domestic need but also in global need. This is the main reason to promote the AOI research for the coming years in Taiwan. Focused industrial applications will be in IC, PCB, LCD, communication, and MEMS parts. This paper will analyze the domestic and global AOI equipment market, summarize the necessary fish bone technology diagrams, survey the actual industrial needs, and propose the strategic plan to be promoted in Taiwan.

Automatic neutron dosimetry system based on fluorescent nuclear track detector technology

International Nuclear Information System (INIS)

Akselrod, M.S.; Fomenko, V.V.; Bartz, J.A.; Haslett, T.L.

2014-01-01

For the first time, the authors are describing an automatic fluorescent nuclear track detector (FNTD) reader for neutron dosimetry. FNTD is a luminescent integrating type of detector made of aluminium oxide crystals that does not require electronics or batteries during irradiation. Non-destructive optical readout of the detector is performed using a confocal laser scanning fluorescence imaging with near-diffraction limited resolution. The fully automatic table-top reader allows one to load up to 216 detectors on a tray, read their engraved IDs using a CCD camera and optical character recognition, scan and process simultaneously two types of images in fluorescent and reflected laser light contrast to eliminate false-positive tracks related to surface and volume crystal imperfections. The FNTD dosimetry system allows one to measure neutron doses from 0.1 mSv to 20 Sv and covers neutron energies from thermal to 20 MeV. The reader is characterised by a robust, compact optical design, fast data processing electronics and user-friendly software. The first table-top automatic FNTD neutron dosimetry system was successfully tested for LLD, linearity and ability to measure neutrons in mixed neutron-photon fields satisfying US and ISO standards. This new neutron dosimetry system provides advantages over other technologies including environmental stability of the detector material, wide range of detectable neutron energies and doses, detector re-readability and re-usability and all-optical readout. A new adaptive image processing algorithm reliably removes false-positive tracks associated with surface and bulk crystal imperfections. (authors)

THE APPLICATION OF RTK-GPS AND STEER-BY-WIRE TECHNOLOGY TO THE AUTOMATIC DRIVING OF VEHICLES AND AN EVALUATION OF DRIVER BEHAVIOR

Directory of Open Access Journals (Sweden)

Manabu OMAE

2006-01-01

Full Text Available Automatic vehicle driving has long been the subject of research efforts designed to improve the safety and efficiency of automobile transportation. In recent years, increasingly sophisticated sensors and automobiles have brought automatic driving systems closer to reality. In this paper we describe an attempt to apply real-time kinematic GPS (RTK-GPS, a highly precise positioning system, and steer-by-wire body technology, which has advanced greatly in recent years, to automatic driving. In addition, we also describe the results of research into human factors related to automatic driving, which will become more and more important as automatic driving is put to practical use.

75 FR 47631 - Swets Information Services, Operations Department, Information Technology Group, Marketing Group...

Science.gov (United States)

2010-08-06

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,668] Swets Information Services, Operations Department, Information Technology Group, Marketing Group, Finance Group, Runnemede..., Information Technology (IT) Group, Marketing Group and the Finance Group into one entity instead of...

Technology working group

International Nuclear Information System (INIS)

Tsujikura, Y.

2000-01-01

The workshop of 26-27 june 2000, on nuclear power Plant LIfe Management (PLIM), also included working groups in which major issues facing PLIM activities for nuclear power plants were identified and discussed. The first group was on Technology. Utilities should consider required provisions capacity by properly maintaining and preserving the existing power plants to the extent practicable and taking into account growing demand, limits of energy conservation, and difficulties in finding new power plant sites. Generally, the extension of the life of nuclear power plant (e.g. from 40 years to 60 years) is an attractive option for utilities, as the marginal cost of most existing nuclear power plants is lower than that of almost all other power sources. It is also an attractive option for environmental protection. Consequently, PLIM has become an important issue in the context of the regulatory reform of the electricity markets. Therefore, the three main objectives of the Technology working group are: 1) Documenting how the safety of nuclear power plants being operated for the long-term has been confirmed, and suggesting ways of sharing this information. 2) Addressing development of advanced maintenance technologies necessary over the plant lifetime, and clarifying their technical challenges. 3) Suggesting potential areas of research and development that might, be necessary. Some potential examples of such research include: - improving the effectiveness of maintenance methods to assure detection of incipient faults; - providing cost effective preventive maintenance programmes; - furnishing systematic, cost-effective refurbishment programmes framed to be consistent with efforts to extend the time between re-fuelling; - developing a methodology that moves routine maintenance on-line without compromising safety. (author)

Automatic Measurement in Large-Scale Space with the Laser Theodolite and Vision Guiding Technology

Directory of Open Access Journals (Sweden)

Bin Wu

2013-01-01

Full Text Available The multitheodolite intersection measurement is a traditional approach to the coordinate measurement in large-scale space. However, the procedure of manual labeling and aiming results in the low automation level and the low measuring efficiency, and the measurement accuracy is affected easily by the manual aiming error. Based on the traditional theodolite measuring methods, this paper introduces the mechanism of vision measurement principle and presents a novel automatic measurement method for large-scale space and large workpieces (equipment combined with the laser theodolite measuring and vision guiding technologies. The measuring mark is established on the surface of the measured workpiece by the collimating laser which is coaxial with the sight-axis of theodolite, so the cooperation targets or manual marks are no longer needed. With the theoretical model data and the multiresolution visual imaging and tracking technology, it can realize the automatic, quick, and accurate measurement of large workpieces in large-scale space. Meanwhile, the impact of artificial error is reduced and the measuring efficiency is improved. Therefore, this method has significant ramification for the measurement of large workpieces, such as the geometry appearance characteristics measuring of ships, large aircraft, and spacecraft, and deformation monitoring for large building, dams.

Development of automatic laser welding system

International Nuclear Information System (INIS)

Ohwaki, Katsura

2002-01-01

Laser are a new production tool for high speed and low distortion welding and applications to automatic welding lines are increasing. IHI has long experience of laser processing for the preservation of nuclear power plants, welding of airplane engines and so on. Moreover, YAG laser oscillators and various kinds of hardware have been developed for laser welding and automation. Combining these welding technologies and laser hardware technologies produce the automatic laser welding system. In this paper, the component technologies are described, including combined optics intended to improve welding stability, laser oscillators, monitoring system, seam tracking system and so on. (author)

Enhancement of the automatic ultrasonic signal processing system using digital technology

International Nuclear Information System (INIS)

Koo, In Soo; Park, H. Y.; Suh, Y. S.; Kim, D. Hoon; Huh, S.; Sung, S. H.; Jang, G. S.; Ryoo, S. G.; Choi, J. H.; Kim, Y. H.; Lee, J. C.; Kim, D. Hyun; Park, H. J.; Kim, Y. C.; Lee, J. P.; Park, C. H.; Kim, M. S.

1999-12-01

The objective of this study is to develop the automatic ultrasonic signal processing system which can be used in the inspection equipment to assess the integrity of the reactor vessel by enhancing the performance of the ultrasonic signal processing system. Main activities of this study divided into three categories such as the development of the circuits for generating ultrasonic signal and receiving the signal from the inspection equipment, the development of signal processing algorithm and H/W of the data processing system, and the development of the specification for application programs and system S/W for the analysis and evaluation computer. The results of main activities are as follows 1) the design of the ultrasonic detector and the automatic ultrasonic signal processing system by using the investigation of the state-of-the-art technology in the inside and outside of the country. 2) the development of H/W and S/W of the data processing system based on the results. Especially, the H/W of the data processing system, which have both advantages of digital and analog controls through the real-time digital signal processing, was developed using the DSP which can process the digital signal in the real-time, and was developed not only firmware of the data processing system in order for the peripherals but also the test algorithm of specimen for the calibration. The application programs and the system S/W of the analysis/evaluation computer were developed. Developed equipment was verified by the performance test. Based on developed prototype for the automatic ultrasonic signal processing system, the localization of the overall ultrasonic inspection equipment for nuclear industries would be expected through the further studies of the H/W establishment of real applications, developing the S/W specification of the analysis computer. (author)

Operator overloading as an enabling technology for automatic differentiation

International Nuclear Information System (INIS)

Corliss, G.F.; Griewank, A.

1993-01-01

We present an example of the science that is enabled by object-oriented programming techniques. Scientific computation often needs derivatives for solving nonlinear systems such as those arising in many PDE algorithms, optimization, parameter identification, stiff ordinary differential equations, or sensitivity analysis. Automatic differentiation computes derivatives accurately and efficiently by applying the chain rule to each arithmetic operation or elementary function. Operator overloading enables the techniques of either the forward or the reverse mode of automatic differentiation to be applied to real-world scientific problems. We illustrate automatic differentiation with an example drawn from a model of unsaturated flow in a porous medium. The problem arises from planning for the long-term storage of radioactive waste

Big Data technology in traffic: A case study of automatic counters

Directory of Open Access Journals (Sweden)

Janković Slađana R.

2016-01-01

Full Text Available Modern information and communication technologies together with intelligent devices provide a continuous inflow of large amounts of data that are used by traffic and transport systems. Collecting traffic data does not represent a challenge nowadays, but the issues remains in relation to storing and processing increasing amounts of data. In this paper we have investigated the possibilities of using Big Data technology to store and process data in the transport domain. The term Big Data refers to a large volume of information resource, its velocity and variety, far beyond the capabilities of commonly used software for storing, processing and data management. In our case study, Apache™ Hadoop® Big Data was used for processing data collected from 10 automatic traffic counters set up in Novi Sad and its surroundings. Indicators of traffic load which were calculated using the Big Data platforms were presented using tables and graphs in Microsoft Office Excel tool. The visualization and geolocation of the obtained indicators were performed using the Microsoft Business Intelligence (BI tools such as: Excel Power View and Excel Power Map. This case study showed that Big Data technologies combined with the BI tools can be used as a reliable support in monitoring of the traffic management systems.

Development of a Motion Sensing and Automatic Positioning Universal Planisphere Using Augmented Reality Technology

Directory of Open Access Journals (Sweden)

Wernhuar Tarng

2017-01-01

Full Text Available This study combines the augmented reality technology and the sensor functions of GPS, electronic compass, and 3-axis accelerometer on mobile devices to develop a motion sensing and automatic positioning universal planisphere. It can create local star charts according to the current date, time, and position and help users locate constellations on the planisphere easily through motion sensing operation. By holding the mobile device towards the target constellation in the sky, the azimuth and elevation angles are obtained automatically for mapping to its correct position on the star chart. The proposed system combines observational activities with physical operation and spatial cognition for developing correct astronomical concepts, thus making learning more effective. It contains a built-in 3D virtual starry sky to enable observation in classroom for supporting teaching applications. The learning process can be shortened by setting varying observation date, time, and latitude. Therefore, it is a useful tool for astronomy education.

Solar Powered Automatic Shrimp Feeding System

Directory of Open Access Journals (Sweden)

Dindo T. Ani

2015-12-01

Full Text Available - Automatic system has brought many revolutions in the existing technologies. One among the technologies, which has greater developments, is the solar powered automatic shrimp feeding system. For instance, the solar power which is a renewable energy can be an alternative solution to energy crisis and basically reducing man power by using it in an automatic manner. The researchers believe an automatic shrimp feeding system may help solve problems on manual feeding operations. The project study aimed to design and develop a solar powered automatic shrimp feeding system. It specifically sought to prepare the design specifications of the project, to determine the methods of fabrication and assembly, and to test the response time of the automatic shrimp feeding system. The researchers designed and developed an automatic system which utilizes a 10 hour timer to be set in intervals preferred by the user and will undergo a continuous process. The magnetic contactor acts as a switch connected to the 10 hour timer which controls the activation or termination of electrical loads and powered by means of a solar panel outputting electrical power, and a rechargeable battery in electrical communication with the solar panel for storing the power. By undergoing through series of testing, the components of the modified system were proven functional and were operating within the desired output. It was recommended that the timer to be used should be tested to avoid malfunction and achieve the fully automatic system and that the system may be improved to handle changes in scope of the project.

Research and Development of Fully Automatic Alien Smoke Stack and Packaging System

Science.gov (United States)

Yang, Xudong; Ge, Qingkuan; Peng, Tao; Zuo, Ping; Dong, Weifu

2017-12-01

The problem of low efficiency of manual sorting packaging for the current tobacco distribution center, which developed a set of safe efficient and automatic type of alien smoke stack and packaging system. The functions of fully automatic alien smoke stack and packaging system adopt PLC control technology, servo control technology, robot technology, image recognition technology and human-computer interaction technology. The characteristics, principles, control process and key technology of the system are discussed in detail. Through the installation and commissioning fully automatic alien smoke stack and packaging system has a good performance and has completed the requirements for shaped cigarette.

Remote automatic control scheme for plasma arc cutting of contaminated waste

International Nuclear Information System (INIS)

Dudar, A.M.; Ward, C.R.; Kriikku, E.M.

1993-01-01

The Robotics Development Group at the Savannah River Technology Center has developed and implemented a scheme to perform automatic cutting of metallic contaminated waste. The scheme employs a plasma arc cutter in conjunction with a laser ranging sensor attached to a robotic manipulator called the Telerobot. A software algorithm using proportional control is then used to perturb the robot's trajectory in such a way as to regulate the plasma arc standoff and the robot's speed in order to achieve automatic plasma arc cuts. The scheme has been successfully tested on simulated waste materials and the results have been very favorable. This report details the development and testing of the scheme

Automatic change detection to facial expressions in adolescents

DEFF Research Database (Denmark)

Liu, Tongran; Xiao, Tong; Jiannong, Shi

2016-01-01

Adolescence is a critical period for the neurodevelopment of social-emotional processing, wherein the automatic detection of changes in facial expressions is crucial for the development of interpersonal communication. Two groups of participants (an adolescent group and an adult group) were...... in facial expressions between the two age groups. The current findings demonstrated that the adolescent group featured more negative vMMN amplitudes than the adult group in the fronto-central region during the 120–200 ms interval. During the time window of 370–450 ms, only the adult group showed better...... automatic processing on fearful faces than happy faces. The present study indicated that adolescent’s posses stronger automatic detection of changes in emotional expression relative to adults, and sheds light on the neurodevelopment of automatic processes concerning social-emotional information....

Algorithm of automatic generation of technology process and process relations of automotive wiring harnesses

Institute of Scientific and Technical Information of China (English)

XU Benzhu; ZHU Jiman; LIU Xiaoping

2012-01-01

Identifying each process and their constraint relations from the complex wiring harness drawings quickly and accurately is the basis for formulating process routes. According to the knowledge of automotive wiring harness and the characteristics of wiring harness components, we established the model of wiring harness graph. Then we research the algorithm of identifying technology processes automatically, finally we describe the relationships between processes by introducing the constraint matrix, which is in or- der to lay a good foundation for harness process planning and production scheduling.

Veal calves’ clinical/health status in large groups fed with automatic feeding devices

Directory of Open Access Journals (Sweden)

Giulio Cozzi

2010-01-01

Full Text Available Aim of the current study was to evaluate the clinical/health status of veal calves in 3 farms that adopt large group housing and automatic feeding stations in Italy. Visits were scheduled in three phases of the rearing cycle (early, middle, and end. Results showed a high incidence of coughing, skin infection and bloated rumen particularly in the middle phase while cross-sucking signs were present at the early stage when calves’ nibbling proclivity is still high. Throughout the rearing cycle, the frequency of bursitis increased reaching 53% of calves at the end. The percentage of calves with a poorer body condition than the mid-range of the batch raised gradually as well, likely due to the non-proportioned teat/calves ratio that increases competition for feed and reduces milk intake of the low ranking animals. The remarked growth differences among pen-mates and the mortality rate close to 7% showed by the use of automatic feeding devices for milk delivery seem not compensating the lower labour demand, therefore its sustainability at the present status is doubtful both for the veal calves’ welfare and the farm incomes.

Sensitivity analysis and design optimization through automatic differentiation

International Nuclear Information System (INIS)

Hovland, Paul D; Norris, Boyana; Strout, Michelle Mills; Bhowmick, Sanjukta; Utke, Jean

2005-01-01

Automatic differentiation is a technique for transforming a program or subprogram that computes a function, including arbitrarily complex simulation codes, into one that computes the derivatives of that function. We describe the implementation and application of automatic differentiation tools. We highlight recent advances in the combinatorial algorithms and compiler technology that underlie successful implementation of automatic differentiation tools. We discuss applications of automatic differentiation in design optimization and sensitivity analysis. We also describe ongoing research in the design of language-independent source transformation infrastructures for automatic differentiation algorithms

Automatic food detection in egocentric images using artificial intelligence technology.

Science.gov (United States)

Jia, Wenyan; Li, Yuecheng; Qu, Ruowei; Baranowski, Thomas; Burke, Lora E; Zhang, Hong; Bai, Yicheng; Mancino, Juliet M; Xu, Guizhi; Mao, Zhi-Hong; Sun, Mingui

2018-03-26

To develop an artificial intelligence (AI)-based algorithm which can automatically detect food items from images acquired by an egocentric wearable camera for dietary assessment. To study human diet and lifestyle, large sets of egocentric images were acquired using a wearable device, called eButton, from free-living individuals. Three thousand nine hundred images containing real-world activities, which formed eButton data set 1, were manually selected from thirty subjects. eButton data set 2 contained 29 515 images acquired from a research participant in a week-long unrestricted recording. They included both food- and non-food-related real-life activities, such as dining at both home and restaurants, cooking, shopping, gardening, housekeeping chores, taking classes, gym exercise, etc. All images in these data sets were classified as food/non-food images based on their tags generated by a convolutional neural network. A cross data-set test was conducted on eButton data set 1. The overall accuracy of food detection was 91·5 and 86·4 %, respectively, when one-half of data set 1 was used for training and the other half for testing. For eButton data set 2, 74·0 % sensitivity and 87·0 % specificity were obtained if both 'food' and 'drink' were considered as food images. Alternatively, if only 'food' items were considered, the sensitivity and specificity reached 85·0 and 85·8 %, respectively. The AI technology can automatically detect foods from low-quality, wearable camera-acquired real-world egocentric images with reasonable accuracy, reducing both the burden of data processing and privacy concerns.

Ergonomics technology

Science.gov (United States)

Jones, W. L.

1977-01-01

Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

Report on achievements of research and development of an automatic sewing system in fiscal 1986. Sewing and assembling technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokokusho. Hosei kumitate gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

This paper describes the sewing and assembling technology, extracted from the achievement report for fiscal 1986 on developing an automatic sewing system. The sewing pretreatment technology has made it possible to express performance requirement of inner lining compounded cloths in numerals objectively to some extent. Discussions are being given in different ways on inner lining substituting technologies to improve elasticity and volume feeling in cloths. The high-frequency induction heating system has made it possible to attain bond compounded cloths of high quality. The three-dimensional sewing technology has improved largely the positioning and supporting performances of the automatic sleeve fitting system. A prospect was achieved in the cloth movement amount detecting technology for automatic cloth feed control. A cylindrical form sewing system, which has realized cloth tension control, made a study focussed on the object processes possible in the future. The automatic looper thread feeding type sewing mechanism using the super sewing technology had each function increased in stability, but improvement in maintainability is important when the mechanism is mounded in a sewing machine. The high-function press processing technology will continue its progress into fiscal 1987 by utilizing the achievements made to date, such as utilization of flexible dummies, establishment of pressing conditions, and prototype of a three-dimensional pressing device. (NEDO)

A training approach to improve stepping automaticity while dual-tasking in Parkinson's disease

Science.gov (United States)

Chomiak, Taylor; Watts, Alexander; Meyer, Nicole; Pereira, Fernando V.; Hu, Bin

2017-01-01

Abstract Background: Deficits in motor movement automaticity in Parkinson's disease (PD), especially during multitasking, are early and consistent hallmarks of cognitive function decline, which increases fall risk and reduces quality of life. This study aimed to test the feasibility and potential efficacy of a wearable sensor-enabled technological platform designed for an in-home music-contingent stepping-in-place (SIP) training program to improve step automaticity during dual-tasking (DT). Methods: This was a 4-week prospective intervention pilot study. The intervention uses a sensor system and algorithm that runs off the iPod Touch which calculates step height (SH) in real-time. These measurements were then used to trigger auditory (treatment group, music; control group, radio podcast) playback in real-time through wireless headphones upon maintenance of repeated large amplitude stepping. With small steps or shuffling, auditory playback stops, thus allowing participants to use anticipatory motor control to regain positive feedback. Eleven participants were recruited from an ongoing trial (Trial Number: ISRCTN06023392). Fear of falling (FES-I), general cognitive functioning (MoCA), self-reported freezing of gait (FOG-Q), and DT step automaticity were evaluated. Results: While we found no significant effect of training on FES-I, MoCA, or FOG-Q, we did observe a significant group (music vs podcast) by training interaction in DT step automaticity (Ptraining to increase motor automaticity for people living with PD. The training approach described here can be implemented at home to meet the growing demand for self-management of symptoms by patients. PMID:28151878

Technology Sharing in Manufacturing Business Groups

DEFF Research Database (Denmark)

Sköld, Martin; Karlsson, Christer

2012-01-01

, consultants, partners, and others. However, the distinction between the focal firm, on the one hand, and networks, on the other, is in this paper argued to be too extensive without intermediating nuances. Less focus is given to an in-between perspective configured by business groups or concerns here defined...... as parent corporations with subsidiary companies. It is this perspective of business groups with characteristics between individual firms and open networks that is of interest in this paper. The focus is on manufacturing business groups in which the companies will typically have individual as well as common......Technology represents the primordial force for companies and organizations in securing long-term competitiveness. In the intensive search to access new technology, organizations are more and more looking beyond the borders of the focal firm and becoming involved in various networks with suppliers...

Report on achievements of research and development of an automatic sewing system in fiscal 1986. System management and control technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on the 'development of an automatic sewing system'. The association is performing the research and development by dividing the subject into such component technologies as a total system and sewing preparation and processing technology, a sewing and assembling technology, a cloth handling technology, and a system management and control technology. This paper reports the achievement of the research and development on the system management and control technology. Plans have been established on the following items: dimensional inspection of sewn parts by using an image processing technology, real-time processing of the matching work interlocked with a striped pattern cloth handling device, and a processing positioning algorithm to instruct sewing lines and needle dropping points based on contour lines of pockets and collars. The effects thereof were verified. Printing seven-segmented numerals on cloth by using fluorescent whitener and an automatic reading test of the printed information verified that the technology can be applied to tracking the parts in a processing line as an ID information. Researches were also made on unification of micro-computers for controlling such automatic machines as a multi-functional sewing machine, a three-dimensional sewing machine, and a cloth handling and positioning device, as well as on interface with the computer for function sharing management and control. (NEDO)

Report on achievements of research and development of an automatic sewing system in fiscal 1986. System management and control technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on the 'development of an automatic sewing system'. The association is performing the research and development by dividing the subject into such component technologies as a total system and sewing preparation and processing technology, a sewing and assembling technology, a cloth handling technology, and a system management and control technology. This paper reports the achievement of the research and development on the system management and control technology. Plans have been established on the following items: dimensional inspection of sewn parts by using an image processing technology, real-time processing of the matching work interlocked with a striped pattern cloth handling device, and a processing positioning algorithm to instruct sewing lines and needle dropping points based on contour lines of pockets and collars. The effects thereof were verified. Printing seven-segmented numerals on cloth by using fluorescent whitener and an automatic reading test of the printed information verified that the technology can be applied to tracking the parts in a processing line as an ID information. Researches were also made on unification of micro-computers for controlling such automatic machines as a multi-functional sewing machine, a three-dimensional sewing machine, and a cloth handling and positioning device, as well as on interface with the computer for function sharing management and control. (NEDO)

Cost-benefit analysis of the ATM automatic deposit service

Directory of Open Access Journals (Sweden)

Ivica Županović

2015-03-01

Full Text Available Bankers and other financial experts have analyzed the value of automated teller machines (ATM in terms of growing consumer demand, rising costs of technology development, decreasing profitability and market share. This paper presents a step-by-step cost-benefit analysis of the ATM automatic deposit service. The first step is to determine user attitudes towards using ATM automatic deposit service by using the Technology Acceptance Model (TAM. The second step is to determine location priorities for ATMs that provide automatic deposit services using the Analytic Hierarchy Process (AHP model. The results of the previous steps enable a highly efficient application of cost-benefit analysis for evaluating costs and benefits of automatic deposit services. To understand fully the proposed procedure outside of theoretical terms, a real-world application of a case study is conducted.

Summary of the particle physics and technology working group

International Nuclear Information System (INIS)

Stephan Lammel et al. email = crathbun@fnal.gov

2002-01-01

Progress in particle physics has been tightly related to technological advances during the past half century. Progress in technologies has been driven in many cases by the needs of particle physics. Often, these advances have benefited fields beyond particle physics: other scientific fields, medicine, industrial development, and even found commercial applications. The particle physics and technology working group of Snowmass 2001 reviewed leading-edge technologies recently developed or in the need of development for particle physics. The group has identified key areas where technological advances are vital for progress in the field, areas of opportunities where particle physics may play a principle role in fostering progress, and areas where advances in other fields may directly benefit particle physics. The group has also surveyed the technologies specifically developed or enhanced by research in particle physics that benefit other fields and/or society at large

Group Innovation Ability of Agricultural Technological Innovation Strategic Alliance

Institute of Scientific and Technical Information of China (English)

Chishun; MA; Jintian; YU

2013-01-01

Agricultural technological innovation strategic alliance, as an important form of strategic alliance, has steadily strengthened the collaborative management among organizations and raised competitive power with the backing of improved group innovation ability. This article studies innovation ability from individual innovation ability to the group innovation ability. Firstly, basic connotation of group innovation ability is to be concluded through the comparison of individual and group innovation ability. Secondly, evaluation index system is to be established based on the influencing factors of the group innovation ability of agricultural technological innovation strategic alliance and evaluation is based on three dimensions, namely organization technological innovation ability, alliance collaborative innovation ability as well as innovation environment. Furthermore, basic methods for promoting the group innovation ability of alliance are to be proposed.

Group colocation behavior in technological social networks.

Directory of Open Access Journals (Sweden)

Chloë Brown

Full Text Available We analyze two large datasets from technological networks with location and social data: user location records from an online location-based social networking service, and anonymized telecommunications data from a European cellphone operator, in order to investigate the differences between individual and group behavior with respect to physical location. We discover agreements between the two datasets: firstly, that individuals are more likely to meet with one friend at a place they have not visited before, but tend to meet at familiar locations when with a larger group. We also find that groups of individuals are more likely to meet at places that their other friends have visited, and that the type of a place strongly affects the propensity for groups to meet there. These differences between group and solo mobility has potential technological applications, for example, in venue recommendation in location-based social networks.

Application of automatic image analysis in wood science

Science.gov (United States)

Charles W. McMillin

1982-01-01

In this paper I describe an image analysis system and illustrate with examples the application of automatic quantitative measurement to wood science. Automatic image analysis, a powerful and relatively new technology, uses optical, video, electronic, and computer components to rapidly derive information from images with minimal operator interaction. Such instruments...

The automatic component of habit in health behavior: habit as cue-contingent automaticity.

Science.gov (United States)

Orbell, Sheina; Verplanken, Bas

2010-07-01

Habit might be usefully characterized as a form of automaticity that involves the association of a cue and a response. Three studies examined habitual automaticity in regard to different aspects of the cue-response relationship characteristic of unhealthy and healthy habits. In each study, habitual automaticity was assessed by the Self-Report Habit Index (SRHI). In Study 1 SRHI scores correlated with attentional bias to smoking cues in a Stroop task. Study 2 examined the ability of a habit cue to elicit an unwanted habit response. In a prospective field study, habitual automaticity in relation to smoking when drinking alcohol in a licensed public house (pub) predicted the likelihood of cigarette-related action slips 2 months later after smoking in pubs had become illegal. In Study 3 experimental group participants formed an implementation intention to floss in response to a specified situational cue. Habitual automaticity of dental flossing was rapidly enhanced compared to controls. The studies provided three different demonstrations of the importance of cues in the automatic operation of habits. Habitual automaticity assessed by the SRHI captured aspects of a habit that go beyond mere frequency or consistency of the behavior. PsycINFO Database Record (c) 2010 APA, all rights reserved.

FY1987 report on the result of the R and D of an automatic sewing system. Sewing assembly technology; 1987 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Hosei kumitate gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The paper summarized the R and D of sewing assembly technology which is an element technology of an automatic sewing system by the Automatic Sewing System Technology Research Association. This technology is divided into three: (1) sewing pretreatment technology; (2) high functional sewing technology; (3) sub-element technology of high functional press technology. In (1), the process adaptability of bonding technology was evaluated to study the shape retention effect and processability. A bonding method was developed in which the thermal cross-linking silan denaturated polyamide adhesive PA-115 and the foaming agent are combinedly used. A study for improvement was conducted of a prototype using drum type photoconductor. A thread type adhesive supply unit for sewing substitution was developed. The high frequency inductive heating adhesive was evaluated. In (2), problems were bettered on the conventional system of 3D sewing technology. Improvement/design were made of the looper thread automatic supply type sewing mechanism of super stitching unit. The multi-functional sewing system is very practical. In (3), the following were conducted: study for improvement of flexible dummy, turntable unit loaded with two dummies, study for size reduction of sleeve frame driving unit and shape setting, study for setting of press conditions, and operational evaluation. (NEDO)

The Role of Item Models in Automatic Item Generation

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2012-01-01

Automatic item generation represents a relatively new but rapidly evolving research area where cognitive and psychometric theories are used to produce tests that include items generated using computer technology. Automatic item generation requires two steps. First, test development specialists create item models, which are comparable to templates…

2nd International Conference on Mechatronics and Automatic Control

CERN Document Server

2015-01-01

This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the second International Conference on Mechatronics and Automatic Control Systems held in Beijing, China on September 20-21, 2014. Examines how to improve productivity through the latest advanced technologies Covering new systems and techniques in the broad field of mechatronics and automatic control systems.

Metabolic changes in occipital lobe epilepsy with automatisms.

Science.gov (United States)

Wong, Chong H; Mohamed, Armin; Wen, Lingfeng; Eberl, Stefan; Somerville, Ernest; Fulham, Michael; Bleasel, Andrew F

2014-01-01

Some studies suggest that the pattern of glucose hypometabolism relates not only to the ictal-onset zone but also reflects seizure propagation. We investigated metabolic changes in patients with occipital lobe epilepsy (OLE) that may reflect propagation of ictal discharge during seizures with automatisms. Fifteen patients who had undergone epilepsy surgery for intractable OLE and had undergone interictal Fluorine-18-fluorodeoxyglucose positron-emission tomography ((18)F-FDG-PET) between 1994 and 2004 were divided into two groups (with and without automatisms during seizure). Significant regions of hypometabolism were identified by comparing (18)F-FDG-PET results from each group with 16 healthy controls by using statistical parametric mapping. Significant hypometabolism was confined largely to the epileptogenic occipital lobe in the patient group without automatisms. In patients with automatisms, glucose hypometabolism extended from the epileptogenic occipital lobe into the ipsilateral temporal lobe. We identified a distinctive hypometabolic pattern that was specific for OLE patients with automatisms during a seizure. This finding supports the postulate that seizure propagation is a cause of glucose hypometabolism beyond the region of seizure onset.

A CityGML extension for traffic-sign objects that guides the automatic processing of data collected using Mobile Mapping technology

Science.gov (United States)

Varela-González, M.; Riveiro, B.; Arias-Sánchez, P.; González-Jorge, H.; Martínez-Sánchez, J.

2014-11-01

The rapid evolution of integral schemes, accounting for geometric and semantic data, has been importantly motivated by the advances in the last decade in mobile laser scanning technology; automation in data processing has also recently influenced the expansion of the new model concepts. This paper reviews some important issues involved in the new paradigms of city 3D modelling: an interoperable schema for city 3D modelling (cityGML) and mobile mapping technology to provide the features that composing the city model. This paper focuses in traffic signs, discussing their characterization using cityGML in order to ease the implementation of LiDAR technology in road management software, as well as analysing some limitations of the current technology in the labour of automatic detection and classification.

Automatic Program Development

DEFF Research Database (Denmark)

Automatic Program Development is a tribute to Robert Paige (1947-1999), our accomplished and respected colleague, and moreover our good friend, whose untimely passing was a loss to our academic and research community. We have collected the revised, updated versions of the papers published in his...... honor in the Higher-Order and Symbolic Computation Journal in the years 2003 and 2005. Among them there are two papers by Bob: (i) a retrospective view of his research lines, and (ii) a proposal for future studies in the area of the automatic program derivation. The book also includes some papers...... by members of the IFIP Working Group 2.1 of which Bob was an active member. All papers are related to some of the research interests of Bob and, in particular, to the transformational development of programs and their algorithmic derivation from formal specifications. Automatic Program Development offers...

Metabolic changes in occipital lobe epilepsy with automatisms

Directory of Open Access Journals (Sweden)

Chong H Wong

2014-07-01

Full Text Available Purpose: Some studies suggest that the pattern of glucose hypometabolism relates not only to the ictal-onset zone, but also reflects seizure propagation. We investigated metabolic changes in patients with occipital lobe epilepsy (OLE that may reflect propagation of ictal discharge during seizures with automatisms.Methods: Fifteen patients who had undergone epilepsy surgery for intractable OLE and had undergone interictal Fluorine-18-fluorodeoxyglucose positron emission tomography (18F-FDG-PET between 1994 and 2004 were divided into two groups (with and without automatisms during seizure. Significant regions of hypometabolism were identified by comparing 18F-FDG-PET results from each group with 16 healthy controls by using Statistical Parametric Mapping (SPM 2.Key Findings: Significant hypometabolism was confined largely to the epileptogenic occipital lobe in the patient group without automatisms. In patients with automatisms, glucose hypometabolism extended from the epileptogenic occipital lobe into the ipsilateral temporal lobe.Significance: We identified a distinctive hypometabolic pattern that was specific for OLE patients with automatisms during a seizure. This finding supports the postulate that seizure propagation is a cause of glucose hypometabolism beyond the region of seizure onset.

From the Conception to the Marketing of a New Automatic Control

DEFF Research Database (Denmark)

Nielsen, Peter V.; Kildegaard, Erik; Boel, Jan

1985-01-01

From a historical viewpoint, product technology has developed via radiator thermostats, return thermostats and selfacting automatic temperature and pressure controls towards more integrated automatic control systems also including weather compensators, which offer benefits in the form of energy...

Individual differences in automatic emotion regulation affect the asymmetry of the LPP component.

Directory of Open Access Journals (Sweden)

Jing Zhang

Full Text Available The main goal of this study was to investigate how automatic emotion regulation altered the hemispheric asymmetry of ERPs elicited by emotion processing. We examined the effect of individual differences in automatic emotion regulation on the late positive potential (LPP when participants were viewing blocks of positive high arousal, positive low arousal, negative high arousal and negative low arousal pictures from International affect picture system (IAPS. Two participant groups were categorized by the Emotion Regulation-Implicit Association Test which has been used in previous research to identify two groups of participants with automatic emotion control and with automatic emotion express. The main finding was that automatic emotion express group showed a right dominance of the LPP component at posterior electrodes, especially in high arousal conditions. But no right dominance of the LPP component was observed for automatic emotion control group. We also found the group with automatic emotion control showed no differences in the right posterior LPP amplitude between high- and low-arousal emotion conditions, while the participants with automatic emotion express showed larger LPP amplitude in the right posterior in high-arousal conditions compared to low-arousal conditions. This result suggested that AER (Automatic emotion regulation modulated the hemispheric asymmetry of LPP on posterior electrodes and supported the right hemisphere hypothesis.

Individual differences in automatic emotion regulation affect the asymmetry of the LPP component.

Science.gov (United States)

Zhang, Jing; Zhou, Renlai

2014-01-01

The main goal of this study was to investigate how automatic emotion regulation altered the hemispheric asymmetry of ERPs elicited by emotion processing. We examined the effect of individual differences in automatic emotion regulation on the late positive potential (LPP) when participants were viewing blocks of positive high arousal, positive low arousal, negative high arousal and negative low arousal pictures from International affect picture system (IAPS). Two participant groups were categorized by the Emotion Regulation-Implicit Association Test which has been used in previous research to identify two groups of participants with automatic emotion control and with automatic emotion express. The main finding was that automatic emotion express group showed a right dominance of the LPP component at posterior electrodes, especially in high arousal conditions. But no right dominance of the LPP component was observed for automatic emotion control group. We also found the group with automatic emotion control showed no differences in the right posterior LPP amplitude between high- and low-arousal emotion conditions, while the participants with automatic emotion express showed larger LPP amplitude in the right posterior in high-arousal conditions compared to low-arousal conditions. This result suggested that AER (Automatic emotion regulation) modulated the hemispheric asymmetry of LPP on posterior electrodes and supported the right hemisphere hypothesis.

Automatic Amharic text news classification: Aneural networks ...

African Journals Online (AJOL)

School of Computing and Electrical Engineering, Institute of Technology, Bahir Dar University, Bahir Dar ... The study is on classification of Amharic news automatically using neural networks approach. Learning Vector ... INTRODUCTION.

Automatic Deficits can lead to executive deficits in ADHD

Directory of Open Access Journals (Sweden)

Gabriella Martino

2017-12-01

Full Text Available It has been well documented an executive dysfunction in children with Attention Deficit Hyperactivity Disorder (ADHD and with Reading Disorder (RD. The purpose of the present study was to test an alternative hypothesis that deficits in executive functioning within ADHD may be partially due to an impairment of the automatic processing. In addition, since the co-occurrence between ADHD and RD, we tested the hypothesis that the automatic processing may be  a possible common cognitive factor between ADHD and RD. We investigated the automatic processing of selective visual attention through two experiments. 12 children with ADHD, 17 with ADHD+RD and 29 typically developing children, matched for age and gender, performed two tasks: Visual Information Processing Task and Clock Test. As expected, ADHD and ADHD+RD groups differed from the control group in controlled process task, suggesting a deficit in executive functioning. All clinical subjects also exhibited a lower performance in automatic processes, compared to control group. The results of this study suggest that executive deficits within ADHD can be partially due to an impairment of automatic processing.

A training approach to improve stepping automaticity while dual-tasking in Parkinson's disease: A prospective pilot study.

Science.gov (United States)

Chomiak, Taylor; Watts, Alexander; Meyer, Nicole; Pereira, Fernando V; Hu, Bin

2017-02-01

Deficits in motor movement automaticity in Parkinson's disease (PD), especially during multitasking, are early and consistent hallmarks of cognitive function decline, which increases fall risk and reduces quality of life. This study aimed to test the feasibility and potential efficacy of a wearable sensor-enabled technological platform designed for an in-home music-contingent stepping-in-place (SIP) training program to improve step automaticity during dual-tasking (DT). This was a 4-week prospective intervention pilot study. The intervention uses a sensor system and algorithm that runs off the iPod Touch which calculates step height (SH) in real-time. These measurements were then used to trigger auditory (treatment group, music; control group, radio podcast) playback in real-time through wireless headphones upon maintenance of repeated large amplitude stepping. With small steps or shuffling, auditory playback stops, thus allowing participants to use anticipatory motor control to regain positive feedback. Eleven participants were recruited from an ongoing trial (Trial Number: ISRCTN06023392). Fear of falling (FES-I), general cognitive functioning (MoCA), self-reported freezing of gait (FOG-Q), and DT step automaticity were evaluated. While we found no significant effect of training on FES-I, MoCA, or FOG-Q, we did observe a significant group (music vs podcast) by training interaction in DT step automaticity (Ptraining to increase motor automaticity for people living with PD. The training approach described here can be implemented at home to meet the growing demand for self-management of symptoms by patients.

Automatic Validation of Protocol Narration

DEFF Research Database (Denmark)

Bodei, Chiara; Buchholtz, Mikael; Degano, Pierpablo

2003-01-01

We perform a systematic expansion of protocol narrations into terms of a process algebra in order to make precise some of the detailed checks that need to be made in a protocol. We then apply static analysis technology to develop an automatic validation procedure for protocols. Finally, we...

75 FR 21602 - Online Safety and Technology Working Group Meeting

Science.gov (United States)

2010-04-26

... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

75 FR 1338 - Online Safety and Technology Working Group Meeting

Science.gov (United States)

2010-01-11

... promote a safe online environment for children. The Act requires the OSTWG to report its findings and... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

Scheduling algorithms for automatic control systems for technological processes

Science.gov (United States)

Chernigovskiy, A. S.; Tsarev, R. Yu; Kapulin, D. V.

2017-01-01

Wide use of automatic process control systems and the usage of high-performance systems containing a number of computers (processors) give opportunities for creation of high-quality and fast production that increases competitiveness of an enterprise. Exact and fast calculations, control computation, and processing of the big data arrays - all of this requires the high level of productivity and, at the same time, minimum time of data handling and result receiving. In order to reach the best time, it is necessary not only to use computing resources optimally, but also to design and develop the software so that time gain will be maximal. For this purpose task (jobs or operations), scheduling techniques for the multi-machine/multiprocessor systems are applied. Some of basic task scheduling methods for the multi-machine process control systems are considered in this paper, their advantages and disadvantages come to light, and also some usage considerations, in case of the software for automatic process control systems developing, are made.

Automatic Control of the Concrete Mixture Homogeneity in Cycling Mixers

Science.gov (United States)

Anatoly Fedorovich, Tikhonov; Drozdov, Anatoly

2018-03-01

The article describes the factors affecting the concrete mixture quality related to the moisture content of aggregates, since the effectiveness of the concrete mixture production is largely determined by the availability of quality management tools at all stages of the technological process. It is established that the unaccounted moisture of aggregates adversely affects the concrete mixture homogeneity and, accordingly, the strength of building structures. A new control method and the automatic control system of the concrete mixture homogeneity in the technological process of mixing components have been proposed, since the tasks of providing a concrete mixture are performed by the automatic control system of processing kneading-and-mixing machinery with operational automatic control of homogeneity. Theoretical underpinnings of the control of the mixture homogeneity are presented, which are related to a change in the frequency of vibrodynamic vibrations of the mixer body. The structure of the technical means of the automatic control system for regulating the supply of water is determined depending on the change in the concrete mixture homogeneity during the continuous mixing of components. The following technical means for establishing automatic control have been chosen: vibro-acoustic sensors, remote terminal units, electropneumatic control actuators, etc. To identify the quality indicator of automatic control, the system offers a structure flowchart with transfer functions that determine the ACS operation in transient dynamic mode.

Automatic, semi-automatic and manual validation of urban drainage data.

Science.gov (United States)

Branisavljević, N; Prodanović, D; Pavlović, D

2010-01-01

Advances in sensor technology and the possibility of automated long distance data transmission have made continuous measurements the preferable way of monitoring urban drainage processes. Usually, the collected data have to be processed by an expert in order to detect and mark the wrong data, remove them and replace them with interpolated data. In general, the first step in detecting the wrong, anomaly data is called the data quality assessment or data validation. Data validation consists of three parts: data preparation, validation scores generation and scores interpretation. This paper will present the overall framework for the data quality improvement system, suitable for automatic, semi-automatic or manual operation. The first two steps of the validation process are explained in more detail, using several validation methods on the same set of real-case data from the Belgrade sewer system. The final part of the validation process, which is the scores interpretation, needs to be further investigated on the developed system.

Final Report of the Advanced Coal Technology Work Group

Science.gov (United States)

The Advanced Coal Technology workgroup reported to the Clean Air Act Advisory Committee. This page includes the final report of the Advanced Coal Technology Work Group to the Clean Air Act Advisory Committee.

Automatization of the radiation control measurements

International Nuclear Information System (INIS)

Seki, Akio; Ogata, Harumi; Horikoshi, Yoshinori; Shirai, Kenji

1988-01-01

Plutonium Fuel Production Facility (PFPF) was constructed to fabricate the MOX fuels for 'MONJU' and 'JOYO' reactors and to develop the practical fuel fabricating technology. For the fuel fabrication process in this facility, centralized controlling system is being adopted for the mass production of the fuel and reduction of the radiation exposure dose. Also, the radiation control systems are suitable for the large-scale facility and the automatic-remote process of the fuel fabrication. One of the typical radiation control systems is the self moving survey system which has been developed by PNC and adopted for the automatic routine monitoring. (author)

5th International Conference on Electrical Engineering and Automatic Control

CERN Document Server

Yao, Yufeng

2016-01-01

On the basis of instrument electrical and automatic control system, the 5th International Conference on Electrical Engineering and Automatic Control (CEEAC) was established at the crossroads of information technology and control technology, and seeks to effectively apply information technology to a sweeping trend that views control as the core of intelligent manufacturing and life. This book takes a look forward into advanced manufacturing development, an area shaped by intelligent manufacturing. It highlights the application and promotion of process control represented by traditional industries, such as the steel industry and petrochemical industry; the technical equipment and system cooperative control represented by robot technology and multi-axis CNC; and the control and support of emerging process technologies represented by laser melting and stacking, as well as the emerging industry represented by sustainable and intelligent life. The book places particular emphasis on the micro-segments field, such as...

Automatic identification in mining

Energy Technology Data Exchange (ETDEWEB)

Puckett, D; Patrick, C [Mine Computers and Electronics Inc., Morehead, KY (United States)

1998-06-01

The feasibility of monitoring the locations and vital statistics of equipment and personnel in surface and underground mining operations has increased with advancements in radio frequency identification (RFID) technology. This paper addresses the use of RFID technology, which is relatively new to the mining industry, to track surface equipment in mine pits, loading points and processing facilities. Specific applications are discussed, including both simplified and complex truck tracking systems and an automatic pit ticket system. This paper concludes with a discussion of the future possibilities of using RFID technology in mining including monitoring heart and respiration rates, body temperatures and exertion levels; monitoring repetitious movements for the study of work habits; and logging air quality via personnel sensors. 10 refs., 5 figs.

Will the energy crisis put an end to development of automatic gearboxes

Energy Technology Data Exchange (ETDEWEB)

Ward, D

1979-12-13

The power absorbing automatic gearbox may disappear with advancing fuel costs. Electronic controls will be at the center of improvements being developed for possible acceptable small car automatic gearboxes. A total engine management package being developed by Lucas involves extending the microprocessor which with current technology can control both the fuel injection system and the electronic ignition of a car engine to control the automatic gearbox.

Young Adults, Technology, and Weight Loss: A Focus Group Study

OpenAIRE

Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K.

2015-01-01

Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have ver...

Detection technology research on the one-way clutch of automatic brake adjuster

Science.gov (United States)

Jiang, Wensong; Luo, Zai; Lu, Yi

2013-10-01

In this article, we provide a new testing method to evaluate the acceptable quality of the one-way clutch of automatic brake adjuster. To analysis the suitable adjusting brake moment which keeps the automatic brake adjuster out of failure, we build a mechanical model of one-way clutch according to the structure and the working principle of one-way clutch. The ranges of adjusting brake moment both clockwise and anti-clockwise can be calculated through the mechanical model of one-way clutch. Its critical moment, as well, are picked up as the ideal values of adjusting brake moment to evaluate the acceptable quality of one-way clutch of automatic brake adjuster. we calculate the ideal values of critical moment depending on the different structure of one-way clutch based on its mechanical model before the adjusting brake moment test begin. In addition, an experimental apparatus, which the uncertainty of measurement is ±0.1Nm, is specially designed to test the adjusting brake moment both clockwise and anti-clockwise. Than we can judge the acceptable quality of one-way clutch of automatic brake adjuster by comparing the test results and the ideal values instead of the EXP. In fact, the evaluation standard of adjusting brake moment applied on the project are still using the EXP provided by manufacturer currently in China, but it would be unavailable when the material of one-way clutch changed. Five kinds of automatic brake adjusters are used in the verification experiment to verify the accuracy of the test method. The experimental results show that the experimental values of adjusting brake moment both clockwise and anti-clockwise are within the ranges of theoretical results. The testing method provided by this article vividly meet the requirements of manufacturer's standard.

Computer Aided Automatic Control - CAAC artificial intelligence block

Energy Technology Data Exchange (ETDEWEB)

Balate, J.; Chramcov, B.; Princ, M. [Brno Univ. of Technology (Czech Republic). Faculty of Technology in Zlin

2000-07-01

The aim of the plan to build up the system CAAC - Computer Aided Automatic Control is to create modular setup of partial computing programs including theory of automatic control, algorithms of programs for processing signals and programs of control algorithms. To approach its informative contents to students and professional public the CAAC system utilizes Internet services http in the form of WWW pages. The CAAC system is being processed at the Institute of Automation and Control Technique of the Faculty of Technology in Zlin of the Brno University of Technology and is determined particularly for pedagogic purposes. Recently also the methods of artificial intelligence have been included to the open CAAC system and that is comprised in this article. (orig.)

Application of software technology to automatic test data analysis

Science.gov (United States)

Stagner, J. R.

1991-01-01

The verification process for a major software subsystem was partially automated as part of a feasibility demonstration. The methods employed are generally useful and applicable to other types of subsystems. The effort resulted in substantial savings in test engineer analysis time and offers a method for inclusion of automatic verification as a part of regression testing.

Application of image recognition-based automatic hyphae detection in fungal keratitis.

Science.gov (United States)

Wu, Xuelian; Tao, Yuan; Qiu, Qingchen; Wu, Xinyi

2018-03-01

The purpose of this study is to evaluate the accuracy of two methods in diagnosis of fungal keratitis, whereby one method is automatic hyphae detection based on images recognition and the other method is corneal smear. We evaluate the sensitivity and specificity of the method in diagnosis of fungal keratitis, which is automatic hyphae detection based on image recognition. We analyze the consistency of clinical symptoms and the density of hyphae, and perform quantification using the method of automatic hyphae detection based on image recognition. In our study, 56 cases with fungal keratitis (just single eye) and 23 cases with bacterial keratitis were included. All cases underwent the routine inspection of slit lamp biomicroscopy, corneal smear examination, microorganism culture and the assessment of in vivo confocal microscopy images before starting medical treatment. Then, we recognize the hyphae images of in vivo confocal microscopy by using automatic hyphae detection based on image recognition to evaluate its sensitivity and specificity and compare with the method of corneal smear. The next step is to use the index of density to assess the severity of infection, and then find the correlation with the patients' clinical symptoms and evaluate consistency between them. The accuracy of this technology was superior to corneal smear examination (p hyphae detection of image recognition was 89.29%, and the specificity was 95.65%. The area under the ROC curve was 0.946. The correlation coefficient between the grading of the severity in the fungal keratitis by the automatic hyphae detection based on image recognition and the clinical grading is 0.87. The technology of automatic hyphae detection based on image recognition was with high sensitivity and specificity, able to identify fungal keratitis, which is better than the method of corneal smear examination. This technology has the advantages when compared with the conventional artificial identification of confocal

Automatic Smoker Detection from Telephone Speech Signals

DEFF Research Database (Denmark)

Poorjam, Amir Hossein; Hesaraki, Soheila; Safavi, Saeid

2017-01-01

This paper proposes an automatic smoking habit detection from spontaneous telephone speech signals. In this method, each utterance is modeled using i-vector and non-negative factor analysis (NFA) frameworks, which yield low-dimensional representation of utterances by applying factor analysis...... method is evaluated on telephone speech signals of speakers whose smoking habits are known drawn from the National Institute of Standards and Technology (NIST) 2008 and 2010 Speaker Recognition Evaluation databases. Experimental results over 1194 utterances show the effectiveness of the proposed approach...... for the automatic smoking habit detection task....

The research of automatic speed control algorithm based on Green CBTC

Science.gov (United States)

Lin, Ying; Xiong, Hui; Wang, Xiaoliang; Wu, Youyou; Zhang, Chuanqi

2017-06-01

Automatic speed control algorithm is one of the core technologies of train operation control system. It’s a typical multi-objective optimization control algorithm, which achieve the train speed control for timing, comfort, energy-saving and precise parking. At present, the train speed automatic control technology is widely used in metro and inter-city railways. It has been found that the automatic speed control technology can effectively reduce the driver’s intensity, and improve the operation quality. However, the current used algorithm is poor at energy-saving, even not as good as manual driving. In order to solve the problem of energy-saving, this paper proposes an automatic speed control algorithm based on Green CBTC system. Based on the Green CBTC system, the algorithm can adjust the operation status of the train to improve the efficient using rate of regenerative braking feedback energy while ensuring the timing, comfort and precise parking targets. Due to the reason, the energy-using of Green CBTC system is lower than traditional CBTC system. The simulation results show that the algorithm based on Green CBTC system can effectively reduce the energy-using due to the improvement of the using rate of regenerative braking feedback energy.

Automatic detection and counting of cattle in UAV imagery based on machine vision technology (Conference Presentation)

Science.gov (United States)

Rahnemoonfar, Maryam; Foster, Jamie; Starek, Michael J.

2017-05-01

Beef production is the main agricultural industry in Texas, and livestock are managed in pasture and rangeland which are usually huge in size, and are not easily accessible by vehicles. The current research method for livestock location identification and counting is visual observation which is very time consuming and costly. For animals on large tracts of land, manned aircraft may be necessary to count animals which is noisy and disturbs the animals, and may introduce a source of error in counts. Such manual approaches are expensive, slow and labor intensive. In this paper we study the combination of small unmanned aerial vehicle (sUAV) and machine vision technology as a valuable solution to manual animal surveying. A fixed-wing UAV fitted with GPS and digital RGB camera for photogrammetry was flown at the Welder Wildlife Foundation in Sinton, TX. Over 600 acres were flown with four UAS flights and individual photographs used to develop orthomosaic imagery. To detect animals in UAV imagery, a fully automatic technique was developed based on spatial and spectral characteristics of objects. This automatic technique can even detect small animals that are partially occluded by bushes. Experimental results in comparison to ground-truth show the effectiveness of our algorithm.

Young adults, technology, and weight loss: a focus group study.

Science.gov (United States)

Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K

2015-01-01

Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have very little knowledge on the use of Smartphone technology for weight loss but would like to use this type of technology to help them lose weight. Results also indicated that young adults struggle to make healthy food choices and have priorities that outweigh exercise and they need support and guidance to make better decisions. In conclusion, young adults would be open to using Smartphone technology for weight loss but also need feedback and guidance to help make healthy decisions.

Experience in automatic processing of 340.000 images from ITEF 3-m magnetic spectrometer

International Nuclear Information System (INIS)

Dzhelyadin, R.I.; Dukhovskoj, I.A.; Ivanov, L.V.; Kishkurno, V.V.; Krutenkova, A.P.; Kulikov, V.V.; Lyulevich, V.I.; Polikarpov, V.M.; Radkevich, I.A.; Fedorets, V.S.; Fedotov, O.P.

1974-01-01

A number of conclusions were made regarding automatic processing of 340.000 pictures (1.020.000 frames) developed on a three-meter magnetic spectrometer with spark chambers. Possibilities for time optimization of automatic processing programs are discussed. The results of processing of a series of photographs were analysed to compare the paramters of automatic ans semi-automatic processing. Some problems relating to organization and technology of picture processing are also autlined [ru

Research on Application of Automatic Weather Station Based on Internet of Things

Science.gov (United States)

Jianyun, Chen; Yunfan, Sun; Chunyan, Lin

2017-12-01

In this paper, the Internet of Things is briefly introduced, and then its application in the weather station is studied. A method of data acquisition and transmission based on NB-iot communication mode is proposed, Introduction of Internet of things technology, Sensor digital and independent power supply as the technical basis, In the construction of Automatic To realize the intelligent interconnection of the automatic weather station, and then to form an automatic weather station based on the Internet of things. A network structure of automatic weather station based on Internet of things technology is constructed to realize the independent operation of intelligent sensors and wireless data transmission. Research on networking data collection and dissemination of meteorological data, through the data platform for data analysis, the preliminary work of meteorological information publishing standards, networking of meteorological information receiving terminal provides the data interface, to the wisdom of the city, the wisdom of the purpose of the meteorological service.

Automatic food detection in egocentric images using artificial intelligence technology

Science.gov (United States)

Our objective was to develop an artificial intelligence (AI)-based algorithm which can automatically detect food items from images acquired by an egocentric wearable camera for dietary assessment. To study human diet and lifestyle, large sets of egocentric images were acquired using a wearable devic...

Automatic extraction of legal concepts and definitions

NARCIS (Netherlands)

Winkels, R.; Hoekstra, R.

2012-01-01

In this paper we present the results of an experiment in automatic concept and definition extraction from written sources of law using relatively simple natural language and standard semantic web technology. The software was tested on six laws from the tax domain.

Automatic Change Detection to Facial Expressions in Adolescents: Evidence from Visual Mismatch Negativity Responses

Directory of Open Access Journals (Sweden)

Tongran eLiu

2016-03-01

Full Text Available Adolescence is a critical period for the neurodevelopment of social-emotional processing, wherein the automatic detection of changes in facial expressions is crucial for the development of interpersonal communication. Two groups of participants (an adolescent group and an adult group were recruited to complete an emotional oddball task featuring on happy and one fearful condition. The measurement of event-related potential (ERP was carried out via electroencephalography (EEG and electrooculography (EOG recording, to detect visual mismatch negativity (vMMN with regard to the automatic detection of changes in facial expressions between the two age groups. The current findings demonstrated that the adolescent group featured more negative vMMN amplitudes than the adult group in the fronto-central region during the 120-200 ms interval. During the time window of 370-450 ms, only the adult group showed better automatic processing on fearful faces than happy faces. The present study indicated that adolescents posses stronger automatic detection of changes in emotional expression relative to adults, and sheds light on the neurodevelopment of automatic processes concerning social-emotional information.

Are groups working in the Information Technology class? | Mentz ...

African Journals Online (AJOL)

We discuss teache rs' perce ption of the use of group work in the Information Technology (IT) classroom. We describe the current situation regarding the implementation of group work in IT classrooms in South Africa as well as the challenges that IT teachers face when implementing group work. This information will be used ...

AutoWIG: automatic generation of python bindings for C++ libraries

Directory of Open Access Journals (Sweden)

Pierre Fernique

2018-04-01

Full Text Available Most of Python and R scientific packages incorporate compiled scientific libraries to speed up the code and reuse legacy libraries. While several semi-automatic solutions exist to wrap these compiled libraries, the process of wrapping a large library is cumbersome and time consuming. In this paper, we introduce AutoWIG, a Python package that wraps automatically compiled libraries into high-level languages using LLVM/Clang technologies and the Mako templating engine. Our approach is automatic, extensible, and applies to complex C++ libraries, composed of thousands of classes or incorporating modern meta-programming constructs.

The ‘Continuing Misfortune’ of Automatism in Early Surrealism

Directory of Open Access Journals (Sweden)

Tessel M. Bauduin

2015-09-01

Full Text Available In the 1924 Manifesto of Surrealism surrealist leader André Breton (1896-1966 defined Surrealism as ‘psychic automatism in its pure state,’ positioning ‘psychic automatism’ as both a concept and a technique. This definition followed upon an intense period of experimentation with various forms of automatism among the proto-surrealist group; predominantly automatic writing, but also induced dream states. This article explores how surrealist ‘psychic automatism’ functioned as a mechanism for communication, or the expression of thought as directly as possible through the unconscious, in the first two decades of Surrealism. It touches upon automatic writing, hysteria as an automatic bodily performance of the unconscious, dreaming and the experimentation with induced dream states, and automatic drawing and other visual arts-techniques that could be executed more or less automatically as well. For all that the surrealists reinvented automatism for their own poetic, artistic and revolutionary aims, the automatic techniques were primarily drawn from contemporary Spiritualism, psychical research and experimentation with mediums, and the article teases out the connections to mediumistic automatism. It is demonstrated how the surrealists effectively and successfully divested automatism of all things spiritual. It furthermore becomes clear that despite various mishaps, automatism in many forms was a very successful creative technique within Surrealism.

Technology-Enhanced Assessment of Math Fact Automaticity: Patterns of Performance for Low- and Typically Achieving Students

Science.gov (United States)

Stickney, Eric M.; Sharp, Lindsay B.; Kenyon, Amanda S.

2012-01-01

Because math fact automaticity has been identified as a key barrier for students struggling with mathematics, we examined how initial math achievement levels influenced the path to automaticity (e.g., variation in number of attempts, speed of retrieval, and skill maintenance over time) and the relation between attainment of automaticity and gains…

Applying deep learning technology to automatically identify metaphase chromosomes using scanning microscopic images: an initial investigation

Science.gov (United States)

Qiu, Yuchen; Lu, Xianglan; Yan, Shiju; Tan, Maxine; Cheng, Samuel; Li, Shibo; Liu, Hong; Zheng, Bin

2016-03-01

Automated high throughput scanning microscopy is a fast developing screening technology used in cytogenetic laboratories for the diagnosis of leukemia or other genetic diseases. However, one of the major challenges of using this new technology is how to efficiently detect the analyzable metaphase chromosomes during the scanning process. The purpose of this investigation is to develop a computer aided detection (CAD) scheme based on deep learning technology, which can identify the metaphase chromosomes with high accuracy. The CAD scheme includes an eight layer neural network. The first six layers compose of an automatic feature extraction module, which has an architecture of three convolution-max-pooling layer pairs. The 1st, 2nd and 3rd pair contains 30, 20, 20 feature maps, respectively. The seventh and eighth layers compose of a multiple layer perception (MLP) based classifier, which is used to identify the analyzable metaphase chromosomes. The performance of new CAD scheme was assessed by receiver operation characteristic (ROC) method. A number of 150 regions of interest (ROIs) were selected to test the performance of our new CAD scheme. Each ROI contains either interphase cell or metaphase chromosomes. The results indicate that new scheme is able to achieve an area under the ROC curve (AUC) of 0.886+/-0.043. This investigation demonstrates that applying a deep learning technique may enable to significantly improve the accuracy of the metaphase chromosome detection using a scanning microscopic imaging technology in the future.

Does automatic transmission improve driving behavior in older drivers?

Science.gov (United States)

Selander, Helena; Bolin, Ingrid; Falkmer, Torbjörn

2012-01-01

Most older drivers continue to drive as they age. To maintain safe and independent transport, mobility is important for all individuals, but especially for older drivers. The objective of this study was to investigate whether automatic transmission, compared with manual transmission, may improve the driving behavior of older drivers. In total, 31 older drivers (mean age 75.2 years) and 32 younger drivers - used as a control group (mean age 39.2 years) - were assessed twice on the same fixed route; once in a car with manual transmission and once in a car with automatic transmission. The cars were otherwise identical. The driving behavior was assessed with the Ryd On-Road Assessment driving protocol. Time to completion of left turns (right-hand side driving) and the impact of a distraction task were measured. The older group had more driving errors than the younger group, in both the manual and the automatic transmission car. However, and contrary to the younger drivers, automatic transmission improved the older participants' driving behavior as demonstrated by safer speed adjustment in urban areas, greater maneuvering skills, safer lane position and driving in accordance with the speed regulations. Switching to automatic transmission may be recommended for older drivers as a means to maintain safe driving and thereby the quality of their transport mobility. Copyright © 2011 S. Karger AG, Basel.

Report on achievements of research and development of an automatic sewing system in fiscal 1986. Cloth handling technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on the 'development of an automatic sewing system'. The association has performed the research and development by dividing the subject into such component technologies as a total system and sewing preparation and processing technology, a sewing and assembling technology, a cloth handling technology, and a system management and control technology. This paper reports the achievement of the research on the cloth handling technology. This technology may be divided into such component technologies as (1) the cloth holding technology, (2) the high-functional positioning technology, and (3) the soft cloth moving technology. For the technology (1), development was made on the principle models, such as the vertical holding and parallel holding type modules and the cloth operating type module, as well as on the principle model for an auxiliary equipment for holding cloth edges. For the technology (2), development was made on the handler, controller, and coordinated operation control and teaching system. Discussions were given on optimal device configuration, functions required in the devices, and evaluation methods, as the high-functional positioning technology for the sewing process and pressing process. Prototype devices were designed and fabricated. For the technology (3), prototype models of the improved version were fabricated for the stock module and confluence model, their functions and performances were confirmed, and problems and points requiring improvement were extracted for prototype fabrication. (NEDO)

Report on achievements of research and development of an automatic sewing system in fiscal 1986. Cloth handling technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on the 'development of an automatic sewing system'. The association has performed the research and development by dividing the subject into such component technologies as a total system and sewing preparation and processing technology, a sewing and assembling technology, a cloth handling technology, and a system management and control technology. This paper reports the achievement of the research on the cloth handling technology. This technology may be divided into such component technologies as (1) the cloth holding technology, (2) the high-functional positioning technology, and (3) the soft cloth moving technology. For the technology (1), development was made on the principle models, such as the vertical holding and parallel holding type modules and the cloth operating type module, as well as on the principle model for an auxiliary equipment for holding cloth edges. For the technology (2), development was made on the handler, controller, and coordinated operation control and teaching system. Discussions were given on optimal device configuration, functions required in the devices, and evaluation methods, as the high-functional positioning technology for the sewing process and pressing process. Prototype devices were designed and fabricated. For the technology (3), prototype models of the improved version were fabricated for the stock module and confluence model, their functions and performances were confirmed, and problems and points requiring improvement were extracted for prototype fabrication. (NEDO)

Automatization of laboratory extraction installation intended for investigations in the field of reprocessing of spenf fuels

International Nuclear Information System (INIS)

Vznuzdaev, E.A.; Galkin, B.Ya.; Gofman, F.Eh.

1981-01-01

Automatized stand for solving the problem of optimum control on technological extraction process in the spent fuel reprocessing by means of an automatized control system which is based on the means of computation technick is described in the paper. Preliminary experiments which had been conducted on the stand with spent fuel from WWER-440 reactor have shown high efficiency of automatization and possibility to conduct technological investigations in a short period of time and to have much of information which can not be obtained by ordinary organisation of work [ru

A wide range ultra-low power Phase-Locked Loop with automatic frequency setting in 130 nm CMOS technology for data serialisation

International Nuclear Information System (INIS)

Firlej, M.; Fiutowski, T.; Idzik, M.; Moroń, J.; Świentek, K.

2015-01-01

The design and measurements results of a wide frequency range ultra-low power Phase-Locked Loop (PLL) for applications in readout systems of particle physics detectors are presented. The PLL was fabricated in a 130 nm CMOS technology. To allow the implementation of different data serialisation schemes multiple division factors (6, 8, 10, 16) were implemented in the PLL feedback loop. The main PLL block—VCO works in 16 frequency ranges/modes, switched either manually or automatically. A dedicated automatic frequency mode switching circuit was developed to allow simple frequency tuning. Although the PLL was designed and simulated for a frequency range of 30 MHz–3 GHz, due to the SLVS interface limits, the measurements were done only up to 1.3 GHz. The full PLL functionality was experimentally verified, confirming a very low and frequency scalable power consumption (0.7 mW at 1 GHz)

A wide range ultra-low power Phase-Locked Loop with automatic frequency setting in 130 nm CMOS technology for data serialisation

Science.gov (United States)

Firlej, M.; Fiutowski, T.; Idzik, M.; Moroń, J.; Świentek, K.

2015-12-01

The design and measurements results of a wide frequency range ultra-low power Phase-Locked Loop (PLL) for applications in readout systems of particle physics detectors are presented. The PLL was fabricated in a 130 nm CMOS technology. To allow the implementation of different data serialisation schemes multiple division factors (6, 8, 10, 16) were implemented in the PLL feedback loop. The main PLL block—VCO works in 16 frequency ranges/modes, switched either manually or automatically. A dedicated automatic frequency mode switching circuit was developed to allow simple frequency tuning. Although the PLL was designed and simulated for a frequency range of 30 MHz-3 GHz, due to the SLVS interface limits, the measurements were done only up to 1.3 GHz. The full PLL functionality was experimentally verified, confirming a very low and frequency scalable power consumption (0.7 mW at 1 GHz).

Development and preliminary validation of an automatic digital ...

African Journals Online (AJOL)

Amanda Chulayo

2017-10-02

Oct 2, 2017 ... based on an automatic digital analysis system (ADAS) that allows the capture of a series of real-time ... image analysing technology, with the accelerated advance of the hardware and software ..... Enables use of car battery.

76 FR 66327 - Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...

Science.gov (United States)

2011-10-26

... Management, Inc., Corporate Service Group, Information Technology (IT) Division, Including On-Site Leased... Information Management, Inc., Corporate Service Group, Information Technology (IT) Division, including on-site... location of Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...

N-1: Safeguards Science and Technology Group, Tour Areas

International Nuclear Information System (INIS)

Geist, William H.

2012-01-01

Group N-1 develops and provides training on nondestructive assay (NDA) technologies intended for nuclear material accounting and control to fulfill both international and domestic obligations. The N-1 group is located at Technical Area (TA)-35 in Buildings 2 and 27. Visitors to the area can observe developed and fielded NDA technologies, as well as the latest research efforts to develop the next generation of NDA technologies. Several areas are used for NDA training. The N-1 School House area typically is used for basic training on neutron- and gamma-ray-based NDA techniques. This area contains an assortment of gamma-ray detector systems, including sodium iodide and high-purity germanium and the associated measurement components. Many types of neutron assay systems are located here, including both standard coincidence and multiplicity counters. The N-1 School House area is also used for holdup training; located here are the mock holdup assemblies and associated holdup measurement tools. Other laboratory areas in the N-1 space are used for specialized training, such as waste NDA, calorimetry, and advanced gamma-ray NDA. Also, many research laboratories in the N-1 space are used to develop new NDA technologies. The calorimetry laboratory is used to develop and evaluate new technologies and techniques that measure the heat signature from nuclear material to determine mass. The micro calorimetry laboratory is being used to develop advanced technologies that can measure gamma rays with extremely high resolution. This technique has been proven in the laboratory setting, and the team is now working to cultivate a field-capable system. The N-1 group also develops remote and unattended systems for the tracking and control of nuclear material. A demonstration of this technology is located within one of the laboratory spaces. The source tracker software was developed by N-1 to monitor the locations and quantities of nuclear materials. This software is currently used to track

Technological and operational structure of the National Automatic Network for Environmental Radiological Monitoring (RENAMORA)

International Nuclear Information System (INIS)

Martinez G, E.; Lopez G, M.; Aguirre G, J.; Fabian O, R.; Hernandez A, Y.

2015-09-01

The Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) in Mexico is a decentralized body, under the Secretaria de Energia whose main mission is to ensure that activities involving nuclear and radioactive materials as well as ionizing radiation sources are carried out with maximum security, considering the current technological developments. In order to monitor the levels of environmental radiation to which the population is exposed, the CNSNS has established a series of radiological monitoring programs that allow characterize the environmental radiation levels in each zone or region in the country; to identify the occurrence of natural or artificial radiological events, such as nuclear tests and accidents in radioactive or nuclear facilities. The National Automatic Network for Environmental Radiological Monitoring (RENAMORA) project was initiated with the support of the IAEA through MEX9/049 project and its purpose is to have a network of instruments that automatically and in real time, transmit information of the gamma radiological environmental status of the national territory and changes occurring in it. This network provides data such as the speed of ambient dose equivalent, temperature and humidity in different regions of the country. The network is composed of 92 stations that are distributed throughout the national territory. The structure of the stations has evolved since its inception, now allowing detection tasks, data transmission and managing them remotely from the main server, which is located in the CNSNS, which is performed a statistical dose for each monitoring station. Each monitoring station is formed in its current structure by a probe detection of gamma radiation, a communication module and associated electronics, a mini Web server DataGATE, a cellular modem and an interface converter. (Author)

Newborn hearing screening with transient evoked otoacoustic emissions and automatic auditory brainstem response

Directory of Open Access Journals (Sweden)

Renata Mota Mamede de Carvallo

2008-09-01

Full Text Available Objective: The aim of the present investigation was to check Transient Evoked Otoacoustic Emissions and Automatic Auditory Brainstem Response tests applied together in regular nurseries and Newborn Intensive Care Units (NICU, as well as to describe and compare the results obtained in both groups. Methods: We tested 150 newborns from regular nurseries and 70 from NICU. Rresults: The newborn hearing screening results using Transient Evoked Otoacoustic Emissions and Automatic Auditory Brainstem Response tests could be applied to all babies. The “pass” result for the group of babies from the nursery was 94.7% using Transient Evoked Otoacoustic Emissions and 96% using Automatic Auditory Brainstem Response. The newborn intensive care unit group obtained 87.1% on Transient Evoked Otoacoustic Emissions and 80% on the Automatic Auditory Brainstem Response, and there was no statistical difference between the procedures when the groups were evaluated individually. However, comparing the groups, Transient Evoked Otoacoustic Emissions were presented in 94.7% of the nursery babies and in 87.1% in the group from the newborn intensive care unit. Considering the Automatic Auditory Brainstem Response, we found 96 and 87%, respectively. Cconclusions: Transient Evoked Otoacoustic Emissions and Automatic Auditory Brainstem Response had similar “pass” and “fail” results when the procedures were applied to neonates from the regular nursery, and the combined tests were more precise to detect hearing impairment in the newborn intensive care unit babies.

The role of automatic control in future interplanetary spaceflight

Science.gov (United States)

Scull, J. R.; Moore, J. W.

1976-01-01

The paper reviews the guidance and automatic control techniques used in previous U.S. and Soviet lunar and planetary exploration spacecraft, and examines the objectives and requirements of potential future interplanetary missions from the viewpoint of their further demands on automatic control technology. These missions include the Venus orbital imaging radar mission, the Pioneer Mars penetrator mission, the Mars surface sample return mission, Pioneer Saturn/Uranus/Titan probe missions, the Mariner Jupiter orbiter with daughter satellite, and comet and asteroid missions.

Benefit Analyses of Technologies for Automatic Identification to Be Implemented in the Healthcare Sector

Science.gov (United States)

Krey, Mike; Schlatter, Ueli

The tasks and objectives of automatic identification (Auto-ID) are to provide information on goods and products. It has already been established for years in the areas of logistics and trading and can no longer be ignored by the German healthcare sector. Some German hospitals have already discovered the capabilities of Auto-ID. Improvements in quality, safety and reductions in risk, cost and time are aspects and areas where improvements are achievable. Privacy protection, legal restraints, and the personal rights of patients and staff members are just a few aspects which make the heath care sector a sensible field for the implementation of Auto-ID. Auto-ID in this context contains the different technologies, methods and products for the registration, provision and storage of relevant data. With the help of a quantifiable and science-based evaluation, an answer is sought as to which Auto-ID has the highest capability to be implemented in healthcare business.

Automatic sample changer for neutron activation analysis at CDTN, Brazil

International Nuclear Information System (INIS)

Aimore Dutra Neto; Oliveira Pelaes, Ana Clara; Jacimovic, Radojko

2018-01-01

An automatic sample changer was recently developed and installed in the Neutron Activation Analysis (NAA) Laboratory. The certified reference material BCR-320R, Channel Sediment, was analysed in order to verify the reliability of the results obtained by NAA, k 0 -standardisation method, using this automatic system during the gamma-ray measurement step. The results were compared to those manually obtained. The values pointed out that the automatic sample changer is working properly. This changer will increase the productiveness of the neutron activation technique applied at Nuclear Technology Development Centre, CDTN/CNEN expanding its competitiveness as an analytical technique in relation to other techniques. (author)

Development of an automatic reactor inspection system

International Nuclear Information System (INIS)

Kim, Jae Hee; Eom, Heung Seop; Lee, Jae Cheol; Choi, Yoo Raek; Moon, Soon Seung

2002-02-01

Using recent technologies on a mobile robot computer science, we developed an automatic inspection system for weld lines of the reactor vessel. The ultrasonic inspection of the reactor pressure vessel is currently performed by commercialized robot manipulators. Since, however, the conventional fixed type robot manipulator is very huge, heavy and expensive, it needs long inspection time and is hard to handle and maintain. In order to resolve these problems, we developed a new automatic inspection system using a small mobile robot crawling on the vertical wall of the reactor vessel. According to our conceptual design, we developed the reactor inspection system including an underwater inspection robot, a laser position control subsystem, an ultrasonic data acquisition/analysis subsystem and a main control subsystem. We successfully carried out underwater experiments on the reactor vessel mockup, and real reactor ready for Ulchine nuclear power plant unit 6 at Dusan Heavy Industry in Korea. After this project, we have a plan to commercialize our inspection system. Using this system, we can expect much reduction of the inspection time, performance enhancement, automatic management of inspection history, etc. In the economic point of view, we can also expect import substitution more than 4 million dollars. The established essential technologies for intelligent control and automation are expected to be synthetically applied to the automation of similar systems in nuclear power plants

Automatic system for detecting pornographic images

Science.gov (United States)

Ho, Kevin I. C.; Chen, Tung-Shou; Ho, Jun-Der

2002-09-01

Due to the dramatic growth of network and multimedia technology, people can more easily get variant information by using Internet. Unfortunately, it also makes the diffusion of illegal and harmful content much easier. So, it becomes an important topic for the Internet society to protect and safeguard Internet users from these content that may be encountered while surfing on the Net, especially children. Among these content, porno graphs cause more serious harm. Therefore, in this study, we propose an automatic system to detect still colour porno graphs. Starting from this result, we plan to develop an automatic system to search porno graphs or to filter porno graphs. Almost all the porno graphs possess one common characteristic that is the ratio of the size of skin region and non-skin region is high. Based on this characteristic, our system first converts the colour space from RGB colour space to HSV colour space so as to segment all the possible skin-colour regions from scene background. We also apply the texture analysis on the selected skin-colour regions to separate the skin regions from non-skin regions. Then, we try to group the adjacent pixels located in skin regions. If the ratio is over a given threshold, we can tell if the given image is a possible porno graph. Based on our experiment, less than 10% of non-porno graphs are classified as pornography, and over 80% of the most harmful porno graphs are classified correctly.

FY 1987 report on the result of the R and D of an automatic sewing system. Cloth handling technology; 1987 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The paper summarized the R and D of a cloth handling technology which is an element technology of an automatic sewing system by the Automatic Sewing System Technology Research Association. The cloth handling technology is divided into the following three: (1) cloth grasp technology; (2) high-functional positioning technology; (3) element technology of soft cloth conveying technology. In (1), development of the following was conducted: vertical grasp-type module, horizontal grasp-type module, cloth handling-type module, and auxiliary device. Prototypes of each were trially manufactured for experiment on the function confirmation. In (2), the following were conducted: development of experimental models of module handler and module controller for commercialization; study of visual/tactile sense composite multiple-arm cooperative movement control. In (3), in the studies having been made so far, specifications for an experimental model for joint sawing and specifications for the conveying system were studied, and experimental models of stock module and junction module were manufactured/tested/evaluated to study confirmation of function/performance. In this fiscal year, in the light of these results obtained, prototypes of each element device were developed. At the same time, the connection of these element devices made up an experimental model for joint sawing, and effectiveness of the element technology was confirmed in the system. (NEDO)

Annual review in automatic programming

CERN Document Server

Halpern, Mark I; Bolliet, Louis

2014-01-01

Computer Science and Technology and their Application is an eight-chapter book that first presents a tutorial on database organization. Subsequent chapters describe the general concepts of Simula 67 programming language; incremental compilation and conversational interpretation; dynamic syntax; the ALGOL 68. Other chapters discuss the general purpose conversational system for graphical programming and automatic theorem proving based on resolution. A survey of extensible programming language is also shown.

Integrating different tracking systems in football: multiple camera semi-automatic system, local position measurement and GPS technologies.

Science.gov (United States)

Buchheit, Martin; Allen, Adam; Poon, Tsz Kit; Modonutti, Mattia; Gregson, Warren; Di Salvo, Valter

2014-12-01

Abstract During the past decade substantial development of computer-aided tracking technology has occurred. Therefore, we aimed to provide calibration equations to allow the interchangeability of different tracking technologies used in soccer. Eighty-two highly trained soccer players (U14-U17) were monitored during training and one match. Player activity was collected simultaneously with a semi-automatic multiple-camera (Prozone), local position measurement (LPM) technology (Inmotio) and two global positioning systems (GPSports and VX). Data were analysed with respect to three different field dimensions (small, systems were compared, and calibration equations (linear regression models) between each system were calculated for each field dimension. Most metrics differed between the 4 systems with the magnitude of the differences dependant on both pitch size and the variable of interest. Trivial-to-small between-system differences in total distance were noted. However, high-intensity running distance (>14.4 km · h -1 ) was slightly-to-moderately greater when tracked with Prozone, and accelerations, small-to-very largely greater with LPM. For most of the equations, the typical error of the estimate was of a moderate magnitude. Interchangeability of the different tracking systems is possible with the provided equations, but care is required given their moderate typical error of the estimate.

Report of the task group on fermentation technology.

CSIR Research Space (South Africa)

Andrews, RJ

1978-09-01

Full Text Available An ad hoc meeting held in Bloemfontein on 29th November, 1976, identified a need for greater contact between South African research groups involved in fermentation technology. The meeting also suggested that the stimulation of research and training...

Automatic sample changers maintenance manual

International Nuclear Information System (INIS)

Myers, T.A.

1978-10-01

This manual describes and provides trouble-shooting aids for the Automatic Sample Changer electronics on the automatic beta counting system, developed by the Los Alamos Scientific Laboratory Group CNC-11. The output of a gas detector is shaped by a preamplifier, then is coupled to an amplifier. Amplifier output is discriminated and is the input to a scaler. An identification number is associated with each sample. At a predetermined count length, the identification number, scaler data plus other information is punched out on a data card. The next sample to be counted is automatically selected. The beta counter uses the same electronics as the prior count did, the only difference being the sample identification number and sample itself. This manual is intended as a step-by-step aid in trouble-shooting the electronics associated with positioning the sample, counting the sample, and getting the needed data punched on an 80-column data card

Automatic Knowledge Extraction and Knowledge Structuring for a National Term Bank

DEFF Research Database (Denmark)

Lassen, Tine; Madsen, Bodil Nistrup; Erdman Thomsen, Hanne

2011-01-01

This paper gives an introduction to the plans and ongoing work in a project, the aim of which is to develop methods for automatic knowledge extraction and automatic construction and updating of ontologies. The project also aims at developing methods for automatic merging of terminological data fr...... various existing sources, as well as methods for target group oriented knowledge dissemination. In this paper, we mainly focus on the plans for automatic knowledge extraction and knowledge structuring that will result in ontologies for a national term bank.......This paper gives an introduction to the plans and ongoing work in a project, the aim of which is to develop methods for automatic knowledge extraction and automatic construction and updating of ontologies. The project also aims at developing methods for automatic merging of terminological data from...

Automatic Imitation

Science.gov (United States)

Heyes, Cecilia

2011-01-01

"Automatic imitation" is a type of stimulus-response compatibility effect in which the topographical features of task-irrelevant action stimuli facilitate similar, and interfere with dissimilar, responses. This article reviews behavioral, neurophysiological, and neuroimaging research on automatic imitation, asking in what sense it is "automatic"…

Automatic Service Derivation from Business Process Model Repositories via Semantic Technology

NARCIS (Netherlands)

Leopold, H.; Pittke, F.; Mendling, J.

2015-01-01

Although several approaches for service identification have been defined in research and practice, there is a notable lack of fully automated techniques. In this paper, we address the problem of manual work in the context of service derivation and present an approach for automatically deriving

76 FR 13438 - In the Matter of AdAl Group, Inc., Com/Tech Communications Technologies, Inc., Dialog Group, Inc...

Science.gov (United States)

2011-03-11

... Communications Technologies, Inc., Dialog Group, Inc., Eurogas, Inc., Golden Books Family Entertainment, Inc. (n/k/a GB Holdings Liquidation, Inc.), Information Management Technologies Corporation, Interiors, Inc... accurate information concerning the securities of Com/Tech Communications Technologies, Inc. because it has...

Automatic Processing of Changes in Facial Emotions in Dysphoria: A Magnetoencephalography Study.

Science.gov (United States)

Xu, Qianru; Ruohonen, Elisa M; Ye, Chaoxiong; Li, Xueqiao; Kreegipuu, Kairi; Stefanics, Gabor; Luo, Wenbo; Astikainen, Piia

2018-01-01

It is not known to what extent the automatic encoding and change detection of peripherally presented facial emotion is altered in dysphoria. The negative bias in automatic face processing in particular has rarely been studied. We used magnetoencephalography (MEG) to record automatic brain responses to happy and sad faces in dysphoric (Beck's Depression Inventory ≥ 13) and control participants. Stimuli were presented in a passive oddball condition, which allowed potential negative bias in dysphoria at different stages of face processing (M100, M170, and M300) and alterations of change detection (visual mismatch negativity, vMMN) to be investigated. The magnetic counterpart of the vMMN was elicited at all stages of face processing, indexing automatic deviance detection in facial emotions. The M170 amplitude was modulated by emotion, response amplitudes being larger for sad faces than happy faces. Group differences were found for the M300, and they were indexed by two different interaction effects. At the left occipital region of interest, the dysphoric group had larger amplitudes for sad than happy deviant faces, reflecting negative bias in deviance detection, which was not found in the control group. On the other hand, the dysphoric group showed no vMMN to changes in facial emotions, while the vMMN was observed in the control group at the right occipital region of interest. Our results indicate that there is a negative bias in automatic visual deviance detection, but also a general change detection deficit in dysphoria.

Vaginismus and dyspareunia: automatic vs. deliberate disgust responsivity.

Science.gov (United States)

Borg, Charmaine; de Jong, Peter J; Schultz, Willibrord Weijmar

2010-06-01

The difficulty of penetration experienced in vaginismus and dyspareunia may at least partly be due to a disgust-induced defensive response. To examine if sex stimuli specifically elicit: (i) automatic disgust-related memory associations; (ii) physiological disgust responsivity; and/or (iii) deliberate expression of disgust/threat. Two single target Implicit Association Task (st-IAT) and electromyography (EMG) were conducted on three groups: vaginismus (N = 24), dyspareunia (N = 24), and control (N = 31) group. st-IAT, to index their initial disgust-related associations and facial EMG for the m. levator labii and m. corrugator supercilii regions. Both clinical groups showed enhanced automatic sex-disgust associations. As a unique physiological expression of disgust, the levator activity was specifically enhanced for the vaginismus group, when exposed to a women-friendly SEX video clip. Also at the deliberate level, specifically the vaginismus group showed enhanced subjective disgust toward SEX pictures and the SEX clip, along with higher threat responses. Supporting the view that disgust is involved in vaginismus and dyspareunia, for both, clinical groups' sex stimuli automatically elicited associations with disgust. Particularly for the vaginismus group, these initial disgust associations persisted during subsequent validation processes and were also evident at the level of facial expression and self-report data. Findings are consistent with the notion that uncontrollable activated associations are involved in eliciting defensive reactions at the prospect of penetration seen in both conditions. Whereas deliberate attitudes, usually linked with the desire for having intercourse, possibly generate the distinction (e.g., severity) between these two conditions.

Automatic affective appraisal of sexual penetration stimuli in women with vaginismus or dyspareunia.

Science.gov (United States)

Huijding, Jorg; Borg, Charmaine; Weijmar-Schultz, Willibrord; de Jong, Peter J

2011-03-01

Current psychological views are that negative appraisals of sexual stimuli lie at the core of sexual dysfunctions. It is important to differentiate between deliberate appraisals and more automatic appraisals, as research has shown that the former are most relevant to controllable behaviors, and the latter are most relevant to reflexive behaviors. Accordingly, it can be hypothesized that in women with vaginismus, the persistent difficulty to allow vaginal entry is due to global negative automatic affective appraisals that trigger reflexive pelvic floor muscle contraction at the prospect of penetration. To test whether sexual penetration pictures elicited global negative automatic affective appraisals in women with vaginismus or dyspareunia and to examine whether deliberate appraisals and automatic appraisals differed between the two patient groups. Women with persistent vaginismus (N = 24), dyspareunia (N = 23), or no sexual complaints (N = 30) completed a pictorial Extrinsic Affective Simon Task (EAST), and then made a global affective assessment of the EAST stimuli using visual analogue scales (VAS). The EAST assessed global automatic affective appraisals of sexual penetration stimuli, while the VAS assessed global deliberate affective appraisals of these stimuli. Automatic affective appraisals of sexual penetration stimuli tended to be positive, independent of the presence of sexual complaints. Deliberate appraisals of the same stimuli were significantly more negative in the women with vaginismus than in the dyspareunia group and control group, while the latter two groups did not differ in their appraisals. Unexpectedly, deliberate appraisals seemed to be most important in vaginismus, whereas dyspareunia did not seem to implicate negative deliberate or automatic affective appraisals. These findings dispute the view that global automatic affect lies at the core of vaginismus and indicate that a useful element in therapeutic interventions may be the modification of

FY1987 report on the result of the R and D of an automatic sewing system. System management/control technology; 1987 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The paper summarized the R and D of system management/control technology which is an element technology of an automatic sewing system by the Automatic Sewing System Technology Research Association. The effects were confirmed by experiments such as the inspection of dimensions of sewing parts using image processing technology, inspection of the surface state to examine if or not there are darts and pintucks, making and demonstration of the recognition treatment software for fitting patterns on the pocket with big cross stripes, strengthening of the function to determine processing position, etc. Improvement was added to 7 segment letters which becomes ID information so that 8mm letters could be read at a recognition rate of more than 95%. The information required for production plan was summarized after making it mutually connected. Further, a method was worked out for estimation of the standard time required for making the day schedule. Files for drawing-up the optimum process and for process control simulator were made by the expression peculiar to apparel. The framework of the interface was prepared to make the following clear: the integration of the process control use computer into the microcomputer for control of automatic machines such as devices and presses for sewing preparation, multi-functional sewing, assembly sewing, cloth handling/positioning, and the sharing of functions. (NEDO)

A Network of Automatic Control Web-Based Laboratories

Science.gov (United States)

Vargas, Hector; Sanchez Moreno, J.; Jara, Carlos A.; Candelas, F. A.; Torres, Fernando; Dormido, Sebastian

2011-01-01

This article presents an innovative project in the context of remote experimentation applied to control engineering education. Specifically, the authors describe their experience regarding the analysis, design, development, and exploitation of web-based technologies within the scope of automatic control. This work is part of an inter-university…

Experimental Study for Automatic Colony Counting System Based Onimage Processing

Science.gov (United States)

Fang, Junlong; Li, Wenzhe; Wang, Guoxin

Colony counting in many colony experiments is detected by manual method at present, therefore it is difficult for man to execute the method quickly and accurately .A new automatic colony counting system was developed. Making use of image-processing technology, a study was made on the feasibility of distinguishing objectively white bacterial colonies from clear plates according to the RGB color theory. An optimal chromatic value was obtained based upon a lot of experiments on the distribution of the chromatic value. It has been proved that the method greatly improves the accuracy and efficiency of the colony counting and the counting result is not affected by using inoculation, shape or size of the colony. It is revealed that automatic detection of colony quantity using image-processing technology could be an effective way.

What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders.

Science.gov (United States)

Peek, Sebastiaan Theodorus Michaël; Wouters, Eveline J M; Luijkx, Katrien G; Vrijhoef, Hubertus J M

2016-05-03

There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults' needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard

Technology and products of gas companies; Gas gaisha no Technology and Products

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-10

This paper presents the latest technology and products of gas companies. `Newly developed gas table for one-push automatic fish broiling` of Tokyo Gas Co. `Catalytic technology for decomposing dioxin generated by incinerator to make it harmless` of Osaka Gas Co. `Newly developed strong and kindly shower head` of Tokyo Gas Co. By laying fish on a sensor in a grill and appropriately setting upper and lower heating levers, user can skillfully broil fish only by pushing an ignition button. A temperature sensor attached to the center of a grill catches a change in surface temperature of fish, and automatically sets an appropriate broiling time according to the kind and volume of fish. A finish buzzer and automatic extinction mechanism are prepared. The technology decomposes dioxin in exhaust gas of incinerators to make it harmless. The catalyst is prepared by dispersing noble metal or oxide of several angstroms into activated carbon fibers. The shower head can switch hot water power by a control handle

Automatic feedback to promote safe walking and speech loudness control in persons with multiple disabilities: two single-case studies.

Science.gov (United States)

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Green, Vanessa A; Alberti, Gloria; Boccasini, Adele; Smaldone, Angela; Oliva, Doretta; Bosco, Andrea

2014-08-01

Assessing automatic feedback technologies to promote safe travel and speech loudness control in two men with multiple disabilities, respectively. The men were involved in two single-case studies. In Study I, the technology involved a microprocessor, two photocells, and a verbal feedback device. The man received verbal alerting/feedback when the photocells spotted an obstacle in front of him. In Study II, the technology involved a sound-detecting unit connected to a throat and an airborne microphone, and to a vibration device. Vibration occurred when the man's speech loudness exceeded a preset level. The man included in Study I succeeded in using the automatic feedback in substitution of caregivers' alerting/feedback for safe travel. The man of Study II used the automatic feedback to successfully reduce his speech loudness. Automatic feedback can be highly effective in helping persons with multiple disabilities improve their travel and speech performance.

Automatic Optimization for Large-Scale Real-Time Coastal Water Simulation

Directory of Open Access Journals (Sweden)

Shunli Wang

2016-01-01

Full Text Available We introduce an automatic optimization approach for the simulation of large-scale coastal water. To solve the singular problem of water waves obtained with the traditional model, a hybrid deep-shallow-water model is estimated by using an automatic coupling algorithm. It can handle arbitrary water depth and different underwater terrain. As a certain feature of coastal terrain, coastline is detected with the collision detection technology. Then, unnecessary water grid cells are simplified by the automatic simplification algorithm according to the depth. Finally, the model is calculated on Central Processing Unit (CPU and the simulation is implemented on Graphics Processing Unit (GPU. We show the effectiveness of our method with various results which achieve real-time rendering on consumer-level computer.

C-H Activation and Alkyne Annulation via Automatic or Intrinsic Directing Groups: Towards High Step Economy.

Science.gov (United States)

Zheng, Liyao; Hua, Ruimao

2018-06-01

Direct transformation of carbon-hydrogen bond (C-H) has emerged to be a trend for construction of molecules from building blocks with no or less prefunctionalization, leading high atom and step economy. Directing group (DG) strategy is widely used to achieve higher reactivity and selectivity, but additional steps are usually needed for installation and/or cleavage of DGs, limiting step economy of the overall transformation. To meet this challenge, we proposed a concept of automatic DG (DG auto ), which is auto-installed and/or auto-cleavable. Multifunctional oxime and hydrazone DG auto were designed for C-H activation and alkyne annulation to furnish diverse nitrogen-containing heterocycles. Imidazole was employed as an intrinsic DG (DG in ) to synthesize ring-fused and π-extended functional molecules. The alkyne group in the substrates can also be served as DG in for ortho-C-H activation to afford carbocycles. In this account, we intend to give a review of our progress in this area and brief introduction of other related advances on C-H functionalization using DG auto or DG in strategies. © 2018 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Literacy and Technology: Integrating Technology with Small Group, Peer-led Discussions of Literature

Directory of Open Access Journals (Sweden)

Genya Coffey

2012-03-01

Full Text Available This review examines research of computer-mediated small group discussion of literature. The goal of this review is to explore several instructional formats for integrating print-based and new literacies skills. First, the theoretical foundations for the shift from teacher-led to student led discussion are outlined. Research exploring ways in which technology has been infused into several common elements of literature discussion groups are presented next. Benefits and challenges of such integration are highlighted and suggestions for future research are presented.

An Automatic Indirect Immunofluorescence Cell Segmentation System

Directory of Open Access Journals (Sweden)

Yung-Kuan Chan

2014-01-01

Full Text Available Indirect immunofluorescence (IIF with HEp-2 cells has been used for the detection of antinuclear autoantibodies (ANA in systemic autoimmune diseases. The ANA testing allows us to scan a broad range of autoantibody entities and to describe them by distinct fluorescence patterns. Automatic inspection for fluorescence patterns in an IIF image can assist physicians, without relevant experience, in making correct diagnosis. How to segment the cells from an IIF image is essential in developing an automatic inspection system for ANA testing. This paper focuses on the cell detection and segmentation; an efficient method is proposed for automatically detecting the cells with fluorescence pattern in an IIF image. Cell culture is a process in which cells grow under control. Cell counting technology plays an important role in measuring the cell density in a culture tank. Moreover, assessing medium suitability, determining population doubling times, and monitoring cell growth in cultures all require a means of quantifying cell population. The proposed method also can be used to count the cells from an image taken under a fluorescence microscope.

Technology of forming a positive attitude to physical training students of special medical group

Directory of Open Access Journals (Sweden)

Mukhamediarov N.N.

2013-04-01

Full Text Available Defined effective technology stages of forming a positive attitude towards physical education of students in special medical groups, stimulate motivation, epistemologically, informative, content-procedural, analytical and adjustment. For each stage technology offered special tools: lectures, seminars, analysis articles, mini conference on improving technique, racing games, mini-competitions, diagnostic interviews, questionnaires, analysis of log data on attendance. Selected criteria forming positive attitudes towards physical education: theoretical and practical, formed groups for research: experimental and control, analyzed results introduction of technology, efficiency of the proposed technology and means forming a positive attitude towards physical education students in special medical groups.

A cloud-based system for automatic glaucoma screening.

Science.gov (United States)

Fengshou Yin; Damon Wing Kee Wong; Ying Quan; Ai Ping Yow; Ngan Meng Tan; Gopalakrishnan, Kavitha; Beng Hai Lee; Yanwu Xu; Zhuo Zhang; Jun Cheng; Jiang Liu

2015-08-01

In recent years, there has been increasing interest in the use of automatic computer-based systems for the detection of eye diseases including glaucoma. However, these systems are usually standalone software with basic functions only, limiting their usage in a large scale. In this paper, we introduce an online cloud-based system for automatic glaucoma screening through the use of medical image-based pattern classification technologies. It is designed in a hybrid cloud pattern to offer both accessibility and enhanced security. Raw data including patient's medical condition and fundus image, and resultant medical reports are collected and distributed through the public cloud tier. In the private cloud tier, automatic analysis and assessment of colour retinal fundus images are performed. The ubiquitous anywhere access nature of the system through the cloud platform facilitates a more efficient and cost-effective means of glaucoma screening, allowing the disease to be detected earlier and enabling early intervention for more efficient intervention and disease management.

Automatic orbital GTAW welding: Highest quality welds for tomorrow's high-performance systems

Science.gov (United States)

Henon, B. K.

1985-01-01

Automatic orbital gas tungsten arc welding (GTAW) or TIG welding is certain to play an increasingly prominent role in tomorrow's technology. The welds are of the highest quality and the repeatability of automatic weldings is vastly superior to that of manual welding. Since less heat is applied to the weld during automatic welding than manual welding, there is less change in the metallurgical properties of the parent material. The possibility of accurate control and the cleanliness of the automatic GTAW welding process make it highly suitable to the welding of the more exotic and expensive materials which are now widely used in the aerospace and hydrospace industries. Titanium, stainless steel, Inconel, and Incoloy, as well as, aluminum can all be welded to the highest quality specifications automatically. Automatic orbital GTAW equipment is available for the fusion butt welding of tube-to-tube, as well as, tube to autobuttweld fittings. The same equipment can also be used for the fusion butt welding of up to 6 inch pipe with a wall thickness of up to 0.154 inches.

Annual report to the Working Group on Technology, Growth, and Employment

International Nuclear Information System (INIS)

1985-04-01

A meeting of the Working Group on High Energy Physics was convened in Brussels, Belgium, in July 1984, and impaneled new groups of technical experts to report on long-term planning, technical collaborations, and the identification of administrative obstacles experienced within the Summit countries that impede international collaboration. The charges to these three new groups are contained in this report under the section on the Brussels meeting. The reports prepared by the technical experts were then reviewed at the January 1985 meeting at Cadarache, France, and the results are contained in this report under the section on the Cadarache meeting. The Summit Working Group on High Energy Physics believes progress is being made toward cooperation among the Summit countries in the exploration of scientific and technological development upon which the Summit Heads of State and Government declared at Versailles revitalization and growth of the world economy will depend - to a large extent. At Cadarache, the Group found that, since its establishment, international collaboration has increased in the use of present accelerators and in the planning for future accelerators. The Group also found that there are specific areas of technology in which near-term research cooperation is possible. Finally, the Group identified administrative regulations that hamper effective international collaboration in science and technology and that could be revised or eliminated through coordinated, high level Summit action. The major accomplishment of the Working Group thus far has been the creation of a forum for discussions on collaboration in a major field of science by seven industrialized countries. The Group recommends the continuation of its review of long-term plans for major facilities on an intergovernmental basis

Automatic computation of transfer functions

Science.gov (United States)

Atcitty, Stanley; Watson, Luke Dale

2015-04-14

Technologies pertaining to the automatic computation of transfer functions for a physical system are described herein. The physical system is one of an electrical system, a mechanical system, an electromechanical system, an electrochemical system, or an electromagnetic system. A netlist in the form of a matrix comprises data that is indicative of elements in the physical system, values for the elements in the physical system, and structure of the physical system. Transfer functions for the physical system are computed based upon the netlist.

Neural Correlates of Automatic and Controlled Auditory Processing in Schizophrenia

Science.gov (United States)

Morey, Rajendra A.; Mitchell, Teresa V.; Inan, Seniha; Lieberman, Jeffrey A.; Belger, Aysenil

2009-01-01

Individuals with schizophrenia demonstrate impairments in selective attention and sensory processing. The authors assessed differences in brain function between 26 participants with schizophrenia and 17 comparison subjects engaged in automatic (unattended) and controlled (attended) auditory information processing using event-related functional MRI. Lower regional neural activation during automatic auditory processing in the schizophrenia group was not confined to just the temporal lobe, but also extended to prefrontal regions. Controlled auditory processing was associated with a distributed frontotemporal and subcortical dysfunction. Differences in activation between these two modes of auditory information processing were more pronounced in the comparison group than in the patient group. PMID:19196926

Satisfaction with Online Commercial Group Chat: The Influence of Perceived Technology Attributes, Chat Group Characteristics, and Advisor Communication Style

NARCIS (Netherlands)

van Dolen, W.M.; Dabholkar, P.A.; de Ruyter, J.C.

2007-01-01

This study examines online commercial group chat from a structuration theory perspective. The findings support the influence of perceived technology attributes (control, enjoyment, reliability, speed, and ease of use) and chat group characteristics (group involvement, similarity, and receptivity) on

A new technology for automatic identification and sorting of plastics for recycling.

Science.gov (United States)

Ahmad, S R

2004-10-01

A new technology for automatic sorting of plastics, based upon optical identification of fluorescence signatures of dyes, incorporated in such materials in trace concentrations prior to product manufacturing, is described. Three commercial tracers were selected primarily on the basis of their good absorbency in the 310-370 nm spectral band and their identifiable narrow-band fluorescence signatures in the visible band of the spectrum when present in binary combinations. This absorption band was selected because of the availability of strong emission lines in this band from a commercial Hg-arc lamp and high fluorescence quantum yields of the tracers at this excitation wavelength band. The plastics chosen for tracing and identification are HDPE, LDPE, PP, EVA, PVC and PET and the tracers were compatible and chemically non-reactive with the host matrices and did not affect the transparency of the plastics. The design of a monochromatic and collimated excitation source, the sensor system are described and their performances in identifying and sorting plastics doped with tracers at a few parts per million concentration levels are evaluated. In an industrial sorting system, the sensor was able to sort 300 mm long plastic bottles at a conveyor belt speed of 3.5 m.sec(-1) with a sorting purity of -95%. The limitation was imposed due to mechanical singulation irregularities at high speed and the limited processing speed of the computer used.

Jones' instrument technology

CERN Document Server

Jones, Ernest Beachcroft; Kingham, Edward G; Radnai, Rudolf

1985-01-01

Jones' Instrument Technology, Volume 5: Automatic Instruments and Measuring Systems deals with general trends in automatic instruments and measuring systems. Specific examples are provided to illustrate the principles of such devices. A brief review of a considerable number of standards is undertaken, with emphasis on the IEC625 Interface System. Other relevant standards are reviewed, including the interface and backplane bus standards. This volume is comprised of seven chapters and begins with a short introduction to the principles of automatic measurements, classification of measuring system

Automatic extraction of gene ontology annotation and its correlation with clusters in protein networks

Directory of Open Access Journals (Sweden)

Mazo Ilya

2007-07-01

Full Text Available Abstract Background Uncovering cellular roles of a protein is a task of tremendous importance and complexity that requires dedicated experimental work as well as often sophisticated data mining and processing tools. Protein functions, often referred to as its annotations, are believed to manifest themselves through topology of the networks of inter-proteins interactions. In particular, there is a growing body of evidence that proteins performing the same function are more likely to interact with each other than with proteins with other functions. However, since functional annotation and protein network topology are often studied separately, the direct relationship between them has not been comprehensively demonstrated. In addition to having the general biological significance, such demonstration would further validate the data extraction and processing methods used to compose protein annotation and protein-protein interactions datasets. Results We developed a method for automatic extraction of protein functional annotation from scientific text based on the Natural Language Processing (NLP technology. For the protein annotation extracted from the entire PubMed, we evaluated the precision and recall rates, and compared the performance of the automatic extraction technology to that of manual curation used in public Gene Ontology (GO annotation. In the second part of our presentation, we reported a large-scale investigation into the correspondence between communities in the literature-based protein networks and GO annotation groups of functionally related proteins. We found a comprehensive two-way match: proteins within biological annotation groups form significantly denser linked network clusters than expected by chance and, conversely, densely linked network communities exhibit a pronounced non-random overlap with GO groups. We also expanded the publicly available GO biological process annotation using the relations extracted by our NLP technology

Product information representation for feature conversion and implementation of group technology automated coding

Science.gov (United States)

Medland, A. J.; Zhu, Guowang; Gao, Jian; Sun, Jian

1996-03-01

Feature conversion, also called feature transformation and feature mapping, is defined as the process of converting features from one view of an object to another view of the object. In a relatively simple implementation, for each application the design features are automatically converted into features specific for that application. All modifications have to be made via the design features. This is the approach that has attracted most attention until now. In the ideal situation, however, conversions directly from application views to the design view, and to other applications views, are also possible. In this paper, some difficulties faced in feature conversion are discussed. A new representation scheme of feature-based parts models has been proposed for the purpose of one-way feature conversion. The parts models consist of five different levels of abstraction, extending from an assembly level and its attributes, single parts and their attributes, single features and their attributes, one containing the geometric reference element and finally one for detailed geometry. One implementation of feature conversion for rotational components within GT (Group Technology) has already been undertaken using an automated coding procedure operating on a design-feature database. This database has been generated by a feature-based design system, and the GT coding scheme used in this paper is a specific scheme created for a textile machine manufacturing plant. Such feature conversion techniques presented here are only in their early stages of development and further research is underway.

AUTOMATIC CONTROL SYSTEM OF WINTER AUTOMOBILE-ROAD MAINTENANCE

Directory of Open Access Journals (Sweden)

I. I. Leonovich

2008-01-01

Full Text Available In order to ensure a rational usage of financial and material resources directed on winter automobile-road maintenance in theRepublicofBelarusan automatic control system of winter maintenance is under its development and introduction.  The main purpose of the system is to obtain and use meteorological information on the state of a road network that allows to take necessary organizational and technological solutions ensuring safety and continuity of traffic during winter. This system also presupposes to ensure constant control over the state of roadway covering, expenditure of anti-glazed frost materials at all levels of management.The paper considers main aspects pertaining to introduction of the automatic control system of winter maintenance

Software design of automatic counting system for nuclear track based on mathematical morphology algorithm

International Nuclear Information System (INIS)

Pan Yi; Mao Wanchong

2010-01-01

The parameter measurement of nuclear track occupies an important position in the field of nuclear technology. However, traditional artificial counting method has many limitations. In recent years, DSP and digital image processing technology have been applied in nuclear field more and more. For the sake of reducing errors of visual measurement in artificial counting method, an automatic counting system for nuclear track based on DM642 real-time image processing platform is introduced in this article, which is able to effectively remove interferences from the background and noise points, as well as automatically extract nuclear track-points by using mathematical morphology algorithm. (authors)

Investment appraisal of automatic milking and conventional milking technologies in a pasture-based dairy system.

Science.gov (United States)

Shortall, J; Shalloo, L; Foley, C; Sleator, R D; O'Brien, B

2016-09-01

The successful integration of automatic milking (AM) systems and grazing has resulted in AM becoming a feasible alternative to conventional milking (CM) in pasture-based systems. The objective of this study was to identify the profitability of AM in a pasture-based system, relative to CM herringbone parlors with 2 different levels of automation, across 2 farm sizes, over a 10-yr period following initial investment. The scenarios which were evaluated were (1) a medium farm milking 70 cows twice daily, with 1 AM unit, a 12-unit CM medium-specification (MS) parlor and a 12-unit CM high-specification (HS) parlor, and (2) a large farm milking 140 cows twice daily with 2 AM units, a 20-unit CM MS parlor and a 20-unit CM HS parlor. A stochastic whole-farm budgetary simulation model combined capital investment costs and annual labor and maintenance costs for each investment scenario, with each scenario evaluated using multiple financial metrics, such as annual net profit, annual net cash flow, total discounted net profitability, total discounted net cash flow, and return on investment. The capital required for each investment was financed from borrowings at an interest rate of 5% and repaid over 10-yr, whereas milking equipment and building infrastructure were depreciated over 10 and 20 yr, respectively. A supporting labor audit (conducted on both AM and CM farms) showed a 36% reduction in labor demand associated with AM. However, despite this reduction in labor, MS CM technologies consistently achieved greater profitability, irrespective of farm size. The AM system achieved intermediate profitability at medium farm size; it was 0.5% less profitable than HS technology at the large farm size. The difference in profitability was greatest in the years after the initial investment. This study indicated that although milking with AM was less profitable than MS technologies, it was competitive when compared with a CM parlor of similar technology. Copyright © 2016 American Dairy

Critical mm-wave components for synthetic automatic test systems

CERN Document Server

Hrobak, Michael

2015-01-01

Michael Hrobak studied hybrid integrated front end modules for high frequency measurement equipment and especially for synthetic automatic test systems. Recent developments of innovative, critical millimeter-wave components like frequency multipliers, directional couplers, filters, triple balanced mixers and power detectors are illustrated by the author separately and in combination.  Contents Synthetic Instruments Resistive Diode Frequency Multipliers Planar Directional Couplers and Filters Triple Balanced Mixers Zero Bias Schottky Power Detectors Integrated Front End Assemblies  Target Groups Scientists and students in the field of electrical engineering with main emphasis on high frequency technology Engineers and Practitioners dealing with the development of micro- and millimeter-wave measurement instruments  About the Author Dr. Michael Hrobak is with the Microwave Department of the Ferdinand-Braun-Institut (FBH), Berlin, Germany, where he is involved in the development and measurement of monolithic i...

Automatic classification of defects in weld pipe

International Nuclear Information System (INIS)

Anuar Mikdad Muad; Mohd Ashhar Hj Khalid; Abdul Aziz Mohamad; Abu Bakar Mhd Ghazali; Abdul Razak Hamzah

2000-01-01

With the advancement of computer imaging technology, the image on hard radiographic film can be digitized and stored in a computer and the manual process of defect recognition and classification may be replace by the computer. In this paper a computerized method for automatic detection and classification of common defects in film radiography of weld pipe is described. The detection and classification processes consist of automatic selection of interest area on the image and then classify common defects using image processing and special algorithms. Analysis of the attributes of each defect such as area, size, shape and orientation are carried out by the feature analysis process. These attributes reveal the type of each defect. These methods of defect classification result in high success rate. Our experience showed that sharp film images produced better results

Automatic classification of defects in weld pipe

International Nuclear Information System (INIS)

Anuar Mikdad Muad; Mohd Ashhar Khalid; Abdul Aziz Mohamad; Abu Bakar Mhd Ghazali; Abdul Razak Hamzah

2001-01-01

With the advancement of computer imaging technology, the image on hard radiographic film can be digitized and stored in a computer and the manual process of defect recognition and classification may be replaced by the computer. In this paper, a computerized method for automatic detection and classification of common defects in film radiography of weld pipe is described. The detection and classification processes consist of automatic selection of interest area on the image and then classify common defects using image processing and special algorithms. Analysis of the attributes of each defect such area, size, shape and orientation are carried out by the feature analysis process. These attributes reveal the type of each defect. These methods of defect classification result in high success rate. Our experience showed that sharp film images produced better results. (Author)

75 FR 71464 - Metlife Technology, Operations, and Information Technology Groups Including On-Site Leased...

Science.gov (United States)

2010-11-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,210; TA-W-73,210A] Metlife... negative determination regarding the eligibility of workers and former workers of MetLife, Technology... revised certification, and all workers in the group threatened with total or partial separation from...

Evolving a rule system controller for automatic driving in a car racing competition

OpenAIRE

Pérez, Diego; Sáez Achaerandio, Yago; Recio Isasi, Gustavo; Isasi Viñuela, Pedro

2008-01-01

IEEE Symposium on Computational Intelligence and Games. Perth, Australia, 15-18 December 2008. The techniques and the technologies supporting Automatic Vehicle Guidance are important issues. Automobile manufacturers view automatic driving as a very interesting product with motivating key features which allow improvement of the car safety, reduction in emission or fuel consumption or optimization of driver comfort during long journeys. Car racing is an active research field where new ...

A training approach to improve stepping automaticity while dual-tasking in Parkinson's disease

OpenAIRE

Chomiak, Taylor; Watts, Alexander; Meyer, Nicole; Pereira, Fernando V.; Hu, Bin

2017-01-01

Abstract Background: Deficits in motor movement automaticity in Parkinson's disease (PD), especially during multitasking, are early and consistent hallmarks of cognitive function decline, which increases fall risk and reduces quality of life. This study aimed to test the feasibility and potential efficacy of a wearable sensor-enabled technological platform designed for an in-home music-contingent stepping-in-place (SIP) training program to improve step automaticity during dual-tasking (DT). M...

Fluid Intelligence and Automatic Neural Processes in Facial Expression Perception

DEFF Research Database (Denmark)

Liu, Tongran; Xiao, Tong; Li, Xiaoyan

2015-01-01

The relationship between human fluid intelligence and social-emotional abilities has been a topic of considerable interest. The current study investigated whether adolescents with different intellectual levels had different automatic neural processing of facial expressions. Two groups of adolescent...... males were enrolled: a high IQ group and an average IQ group. Age and parental socioeconomic status were matched between the two groups. Participants counted the numbers of the central cross changes while paired facial expressions were presented bilaterally in an oddball paradigm. There were two.......2). Participants were required to concentrate on the primary task of counting the central cross changes and to ignore the expressions to ensure that facial expression processing was automatic. Event-related potentials (ERPs) were obtained during the tasks. The visual mismatch negativity (vMMN) components were...

2011 International Conference in Electrics, Communication and Automatic Control Proceedings

CERN Document Server

2012-01-01

This two-volume set contains the very latest, cutting-edge material in electrics, communication and automatic control. As a vital field of research that is highly relevant to current developments in a number of technological domains, the subjects it covers include micro-electronics and integrated circuit control, signal processing technology, next-generation network infrastructure, wireless communication and scientific instruments. The aim of the International Conference in Electrics, Communication and Automatic Control, held in Chongqing, China, in June 2011 was to provide a valuable inclusive platform for researchers, engineers, academicians and industrial professionals from all over the world to share their research results with fellow scientists in the sector. The call for papers netted well over 600 submissions, of which 224 were selected for presentation. This fully peer-reviewed collection of papers from the conference can be viewed as a single-source compendium of the latest trends and techniques in t...

Experience in designing the automatic nuclear power plant control system

International Nuclear Information System (INIS)

Sedov, V.K.; Busygin, B.F.; Eliseeva, O.V.; Mikhajlov, V.A.

1981-01-01

The integrated automatic control system (ACS) is designed at the Novovoronezh NPP (NVNPP). It comprises automatic technological control of all the five power un+ts and the plant in the whole (ACST) and automatic organizational-economic production control system (ACSP). The NVNPP ACS is designed as a two-level system. The two M-4030 and M-4030-1 computers are the technical base of the upper layer while a set of block NPP (computer-M-60 and M-700 for unit 5; M-60 and SM-2 for units 1-4) of the lower level. Block diagram of the NVNPP ACS, flowsheet of NVNPP ACS technical means and external communications of the control centre are described. The NVNPP ACS is supposed to be put into operation by stages. It is noted that design and introduction of the typical NPP ACS at the NVNPP permits to maximally reduce in the future the period of developing automatic control systems at nly introduced units and NPPs with the WWER reactors [ru

Automatic differentiation bibliography

Energy Technology Data Exchange (ETDEWEB)

Corliss, G.F. [comp.

1992-07-01

This is a bibliography of work related to automatic differentiation. Automatic differentiation is a technique for the fast, accurate propagation of derivative values using the chain rule. It is neither symbolic nor numeric. Automatic differentiation is a fundamental tool for scientific computation, with applications in optimization, nonlinear equations, nonlinear least squares approximation, stiff ordinary differential equation, partial differential equations, continuation methods, and sensitivity analysis. This report is an updated version of the bibliography which originally appeared in Automatic Differentiation of Algorithms: Theory, Implementation, and Application.

Automatic evaluation of speech rhythm instability and acceleration in dysarthrias associated with basal ganglia dysfunction

Directory of Open Access Journals (Sweden)

Jan eRusz

2015-07-01

Full Text Available Speech rhythm abnormalities are commonly present in patients with different neurodegenerative disorders. These alterations are hypothesized to be a consequence of disruption to the basal ganglia circuitry involving dysfunction of motor planning, programming and execution, which can be detected by a syllable repetition paradigm. Therefore, the aim of the present study was to design a robust signal processing technique that allows the automatic detection of spectrally-distinctive nuclei of syllable vocalizations and to determine speech features that represent rhythm instability and acceleration. A further aim was to elucidate specific patterns of dysrhythmia across various neurodegenerative disorders that share disruption of basal ganglia function. Speech samples based on repetition of the syllable /pa/ at a self-determined steady pace were acquired from 109 subjects, including 22 with Parkinson's disease (PD, 11 progressive supranuclear palsy (PSP, 9 multiple system atrophy (MSA, 24 ephedrone-induced parkinsonism (EP, 20 Huntington's disease (HD, and 23 healthy controls. Subsequently, an algorithm for the automatic detection of syllables as well as features representing rhythm instability and rhythm acceleration were designed. The proposed detection algorithm was able to correctly identify syllables and remove erroneous detections due to excessive inspiration and nonspeech sounds with a very high accuracy of 99.6%. Instability of vocal pace performance was observed in PSP, MSA, EP and HD groups. Significantly increased pace acceleration was observed only in the PD group. Although not significant, a tendency for pace acceleration was observed also in the PSP and MSA groups. Our findings underline the crucial role of the basal ganglia in the execution and maintenance of automatic speech motor sequences. We envisage the current approach to become the first step towards the development of acoustic technologies allowing automated assessment of rhythm

Automatic control unit for neutron transmission measurements

Energy Technology Data Exchange (ETDEWEB)

Adib, M.; Abdel-Kawy, A.; Eid, Y.; Ashry, A.; Mostafa, M.; Hamouda, I. (Atomic Energy Establishment, Inshas (Egypt). Reactor and Neutron Physics Dept.)

1981-01-01

An automatic transistorized unit has been designed to control the neutron transmission measurements carried out using the time-of-flight spectrometer. The function of the automatic unit is to control the measurements of the neutron counting rate distribution transmitted through a sample at a selected channel group of the time analyzer for a certain preadjusted time period. At the end of this time, the unit removes the sample out of the neutron beam, selects a second equal channel group of the time analyzer and provides the measurement of the neutron counting rate distribution for the same time period as in the case with the sample on. Such a measuring cycle can be repeated as much as the experiment requires. At the end of these cycles the stored information can be immediately obtained through the analyzer read out unit. It is found that the time of removing the sample out of the neutron beam or returning it back does not exceed 20 seconds instead of the five minutes required in case of manual operation. The most important advantages of using such an automatic unit are saving about 20 percent of the reactor operating time avoidng unnecessary radiation exposure of the experimentalists.

Dissociation between controlled and automatic processes in the behavioral variant of fronto-temporal dementia.

Science.gov (United States)

Collette, Fabienne; Van der Linden, Martial; Salmon, Eric

2010-01-01

A decline of cognitive functioning affecting several cognitive domains was frequently reported in patients with frontotemporal dementia. We were interested in determining if these deficits can be interpreted as reflecting an impairment of controlled cognitive processes by using an assessment tool specifically developed to explore the distinction between automatic and controlled processes, namely the process dissociation procedure (PDP) developed by Jacoby. The PDP was applied to a word stem completion task to determine the contribution of automatic and controlled processes to episodic memory performance and was administered to a group of 12 patients with the behavioral variant of frontotemporal dementia (bv-FTD) and 20 control subjects (CS). Bv-FTD patients obtained a lower performance than CS for the estimates of controlled processes, but no group differences was observed for estimates of automatic processes. The between-groups comparison of the estimates of controlled and automatic processes showed a larger contribution of automatic processes to performance in bv-FTD, while a slightly more important contribution of controlled processes was observed in control subjects. These results are clearly indicative of an alteration of controlled memory processes in bv-FTD.

Predictors of Mental Health Symptoms, Automatic Thoughts, and Self-Esteem Among University Students.

Science.gov (United States)

Hiçdurmaz, Duygu; İnci, Figen; Karahan, Sevilay

2017-01-01

University youth is a risk group regarding mental health, and many mental health problems are frequent in this group. Sociodemographic factors such as level of income and familial factors such as relationship with father are reported to be associated with mental health symptoms, automatic thoughts, and self-esteem. Also, there are interrelations between mental health problems, automatic thoughts, and self-esteem. The extent of predictive effect of each of these variables on automatic thoughts, self-esteem, and mental health symptoms is not known. We aimed to determine the predictive factors of mental health symptoms, automatic thoughts, and self-esteem in university students. Participants were 530 students enrolled at a university in Turkey, during 2014-2015 academic year. Data were collected using the student information form, the Brief Symptom Inventory, the Automatic Thoughts Questionnaire, and the Rosenberg Self-Esteem Scale. Mental health symptoms, self-esteem, perception of the relationship with the father, and level of income as a student significantly predicted automatic thoughts. Automatic thoughts, mental health symptoms, participation in family decisions, and age had significant predictive effects on self-esteem. Finally, automatic thoughts, self-esteem, age, and perception of the relationship with the father had significant predictive effects on mental health symptoms. The predictive factors revealed in our study provide important information to practitioners and researchers by showing the elements that need to be screened for mental health of university students and issues that need to be included in counseling activities.

Automatic Computer Mapping of Terrain

Science.gov (United States)

Smedes, H. W.

1971-01-01

Computer processing of 17 wavelength bands of visible, reflective infrared, and thermal infrared scanner spectrometer data, and of three wavelength bands derived from color aerial film has resulted in successful automatic computer mapping of eight or more terrain classes in a Yellowstone National Park test site. The tests involved: (1) supervised and non-supervised computer programs; (2) special preprocessing of the scanner data to reduce computer processing time and cost, and improve the accuracy; and (3) studies of the effectiveness of the proposed Earth Resources Technology Satellite (ERTS) data channels in the automatic mapping of the same terrain, based on simulations, using the same set of scanner data. The following terrain classes have been mapped with greater than 80 percent accuracy in a 12-square-mile area with 1,800 feet of relief; (1) bedrock exposures, (2) vegetated rock rubble, (3) talus, (4) glacial kame meadow, (5) glacial till meadow, (6) forest, (7) bog, and (8) water. In addition, shadows of clouds and cliffs are depicted, but were greatly reduced by using preprocessing techniques.

Modelling the adoption of automatic milking systems in Noord-Holland

NARCIS (Netherlands)

Floridi, M.; Bartolini, F.; Peerlings, J.H.M.; Polman, N.B.P.; Viaggi, D.

2013-01-01

Innovation and new technology adoption represent two central elements for the business and industry development process in agriculture. One of the most relevant innovations in dairy farms is the robotisation of the milking process through the adoption of Automatic Milking Systems (AMS). The purpose

Automaticity of cognitive biases in addictive behaviours: further evidence with gamblers.

Science.gov (United States)

McCusker, C G; Gettings, B

1997-11-01

The hypotheses that automatic, non-volitional, attentional and memory biases for addiction-related constructs exist is tested with compulsive gamblers. An independent groups design was employed. Processing of gambling, compared to neutral and drug-related information was examined in 15 gamblers recruited from new members of Gamblers Anonymous. Comparisons were made with the performance of their spouses (N = 15) to help distinguish addiction mechanisms from more non-specific emotional experiences with gambling, and an independent control group (N = 15), recruited from the staff and students of a university department. A modified Stroop procedure was first employed. Automative cognitive interference was assessed relatively, by comparing colour-naming times on the gambling, drug and neutral Stroops. A subsequent word-stem completion task of implicit memory was then used to assess selective and automatic priming of the gambling constructs in memory. Only the gamblers showed selective and automatic interference for gambling-related constructs on the Stroop task. Spouses behaved like the control group on this task. An implicit memory bias for gambling-related words was statistically detected only in the gamblers compared to the control group, although the trend was similar in the comparison with spouses. Further evidence for the specificity of these effects was obtained in subgroup comparisons involving fruit-machine with racing gamblers. Results are generally consistent with an automaticity in the cognitive biases gamblers show for gambling-related information. Implications for cognitive understanding and treatments are highlighted.

Automatic analysis of children’s engagement using interactional network features

NARCIS (Netherlands)

Kim, Jaebok; Truong, Khiet Phuong

We explored the automatic analysis of vocal non-verbal cues of a group of children in the context of engagement and collaborative play. For the current study, we defined two types of engagement on groups of children: harmonised and unharmonised. A spontaneous audiovisual corpus with groups of

IMIA Working Group 15 : Technology assessment and quality development in health informatics

NARCIS (Netherlands)

Gennip, E.M.S.J. van

1999-01-01

The working group on technology assessment and quality development in health informatics was established as a follow-up to the recommendations made at the IMIA-ISTAHC working conference in 1990. The working group was approved by the IMIA General Assembly at Kyoto, September, 1993. The working group

Automatic liver volume segmentation and fibrosis classification

Science.gov (United States)

Bal, Evgeny; Klang, Eyal; Amitai, Michal; Greenspan, Hayit

2018-02-01

In this work, we present an automatic method for liver segmentation and fibrosis classification in liver computed-tomography (CT) portal phase scans. The input is a full abdomen CT scan with an unknown number of slices, and the output is a liver volume segmentation mask and a fibrosis grade. A multi-stage analysis scheme is applied to each scan, including: volume segmentation, texture features extraction and SVM based classification. Data contains portal phase CT examinations from 80 patients, taken with different scanners. Each examination has a matching Fibroscan grade. The dataset was subdivided into two groups: first group contains healthy cases and mild fibrosis, second group contains moderate fibrosis, severe fibrosis and cirrhosis. Using our automated algorithm, we achieved an average dice index of 0.93 ± 0.05 for segmentation and a sensitivity of 0.92 and specificity of 0.81for classification. To the best of our knowledge, this is a first end to end automatic framework for liver fibrosis classification; an approach that, once validated, can have a great potential value in the clinic.

Norms concerning the programmable automatic control devices

International Nuclear Information System (INIS)

Fourmentraux, G.

1995-01-01

This presentation is a report of the studies carried out by the Work Group on Functioning Safety of Programmable Automatic Control Devices and by the Group for Prevention Studies (GEP) from the CEA. The objective of these groups is to evaluate the methods which could be used to estimate the functioning safety of control and instrumentation systems involved in the Important Elements for Safety (EIS) of the Basic Nuclear Installations (INB) of the CEA, and also to carry out a qualification of automatic control devices. Norms, protocols and tools for the evaluation are presented. The problem comprises two aspects: the evaluation of fault avoidance techniques and the evaluation of fault control techniques used during the conceiving. For the fault avoidance techniques, the quality assurance organization, the environment tests, and the software quality plans are considered. For the fault control techniques, the different available tools and fault injection models are analysed. The results of an analysis carried out with the DEF.I tool from the National Institute for Research and Safety (INRS) are reported. (J.S.). 23 refs

10 Passed Technologies.

Science.gov (United States)

Montfort, Nick

2001-01-01

Argues that not every disappearing technology deserves that fate and presents 10 technologies that have an elegance and simplicity the winners lack such as the electric trolley, pneumatic post, Amiga, ribbon microphone, WordStar, Edison's wax cylinder, slide rule, reel mover, automatic watch, and airship. (Author/ASK)

Automatic demand response referred to electricity spot price. Demo description

International Nuclear Information System (INIS)

Grande, Ove S.; Livik, Klaus; Hals, Arne

2006-05-01

This report presents background, technical solution and results from a test project (Demo I) developed in the DRR Norway) project. Software and technology from two different vendors, APAS and Powel ASA, are used to demonstrate a scheme for Automatic Demand Response (ADR) referred to spot price level and a system for documentation of demand response and cost savings. Periods with shortage of energy supply and hardly any investments in new production capacity have turned focus towards the need for increased price elasticity on the demand side in the Nordic power market. The new technology for Automatic Meter Reading (AMR) and Remote Load Control (RLC) provides an opportunity to improve the direct market participation from the demand side by introducing automatic schemes that reduce the need for customer attention to hourly market prices. The low prioritized appliances, and not the total load, are in this report defined as the Demand Response Objects, based on the assumption that there is a limit for what the customers are willing to pay for different uses of electricity. Only disconnection of residential water heaters is included in the demo, due to practical limitations. The test was performed for a group of single family houses over a period of 2 months. All the houses were equipped with a radio controlled 'Ebox' unit attached to the water heater socket. The settlement and invoicing were based on hourly metered values (kWh/h), which means that the customer benefit is equivalent to the accumulated changes in the electricity cost per hour. The actual load reduction is documented by comparison between the real meter values for the period and a reference curve. The curves show significant response to the activated control in the morning hours. In the afternoon it is more difficult to register the response, probably due to 'disturbing' activities like cooking etc. Demo I shows that load reduction referred to spot price level can be done in a smooth way. The experiences

Comparison of liver volumetry on contrast-enhanced CT images: one semiautomatic and two automatic approaches.

Science.gov (United States)

Cai, Wei; He, Baochun; Fan, Yingfang; Fang, Chihua; Jia, Fucang

2016-11-08

This study was to evaluate the accuracy, consistency, and efficiency of three liver volumetry methods- one interactive method, an in-house-developed 3D medical Image Analysis (3DMIA) system, one automatic active shape model (ASM)-based segmentation, and one automatic probabilistic atlas (PA)-guided segmentation method on clinical contrast-enhanced CT images. Forty-two datasets, including 27 normal liver and 15 space-occupying liver lesion patients, were retrospectively included in this study. The three methods - one semiautomatic 3DMIA, one automatic ASM-based, and one automatic PA-based liver volumetry - achieved an accuracy with VD (volume difference) of -1.69%, -2.75%, and 3.06% in the normal group, respectively, and with VD of -3.20%, -3.35%, and 4.14% in the space-occupying lesion group, respectively. However, the three methods achieved an efficiency of 27.63 mins, 1.26 mins, 1.18 mins on average, respectively, compared with the manual volumetry, which took 43.98 mins. The high intraclass correlation coefficient between the three methods and the manual method indicated an excel-lent agreement on liver volumetry. Significant differences in segmentation time were observed between the three methods (3DMIA, ASM, and PA) and the manual volumetry (p volumetries (ASM and PA) and the semiautomatic volumetry (3DMIA) (p < 0.001). The semiautomatic interactive 3DMIA, automatic ASM-based, and automatic PA-based liver volum-etry agreed well with manual gold standard in both the normal liver group and the space-occupying lesion group. The ASM- and PA-based automatic segmentation have better efficiency in clinical use. © 2016 The Authors.

Using technology-enhanced, cooperative, group-project learning for student comprehension and academic performance

Science.gov (United States)

Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

2016-05-01

Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly divided into two groups, participated in this study and provided data through questionnaires issued before and after the experiment. The results, obtained through analyses of variance and structural equation modelling, reveal that technology-enhanced, cooperative, group-project learning improves students' comprehension and academic performance.

Design and fabrication of an automatic dual axis solar tracker by ...

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Vol. 9, No. 2, 2017, pp. ... All rights reserved. Design and fabrication of an automatic dual axis solar tracker by using LDR ..... It may be like a wiper of the car. Nomenclature. LDR.

Trends of progress in medical technics as far as automatization is concerned

Energy Technology Data Exchange (ETDEWEB)

Agoston, M [Medicor Muevek, Budapest (Hungary)

1978-09-01

Modernization of medical treatment is developing to the direction of establishing big hospitals and policlinics. Highly productive automatic equipments give possibilities for performing the mass examinations with high efficiency. Still the X-ray instruments form the most valuable and indispensable device group. One direction to develop the automatization of these machines is to achieve the best X-ray exposure. The relatively slow but continuous spreading of isotope diagnostic instruments has been connected with a number of results in automatization, too. In the field of sterilization bactericid materials, gas- and ray sterilizing methods, as well as combined systems become used. Automatization has a strong influence on the domain of epidemiology as well.

Testing the Automatization Deficit Hypothesis of Dyslexia via a Dual-Task Paradigm.

Science.gov (United States)

Yap, Regina L.; van der Leij, Aryan

1994-01-01

Fourteen Dutch children with dyslexia were compared with controls on automatic processing under a dual task (motor balance task and auditory choice task) model. Results indicated the dyslexic group was more impaired in the dual task condition than in the single task condition, compared with controls. Findings support the automatization deficit…

Inspection technology for high pressure pipes

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H

2000-02-01

Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

Simulation technology to develop the automatic control rod operation system in ABWR

Energy Technology Data Exchange (ETDEWEB)

Yoshihiko, Ishii; Atsushi, Fushimi; Naoyuki, Ishida [Hitachi Ltd. Power and Industrial Systems R and D Laboratory, Ibaraki (Japan); Hitoshi, Ochi; Masakazu, Yuzuki [Hitachi Ltd. Power Systems, Hitachi Works, Ibaraki (Japan); Hideki, Hanami [Hitachi Ltd. Information and Control System Div., Ibaraki (Japan)

2007-07-01

To design and verify the automatic power regulator system (APR) for an advanced boiling water reactor (ABWR), Hitachi has developed a plant simulation code system. The 3-dimensional kinetic analysis code STAND, based on a polynomial nodal expansion method, was effective in developing an APR automatic control rod operation algorithm in the critical mode. The point kinetic plant simulator AUTSIMU is an off-line and real time online plant simulation code that can simulate ABWR start-up and shutdown processes from a sub-critical condition with a water temperature of 20 degrees C to the rated operation power level at about 7 MPa. APR operation algorithms were designed using the off-line mode. In this mode, less than one minute in real time was needed to simulate a ten-hour transient with an ordinary personal computer. In the online mode, APR hardware was efficiently verified in a factory test before shipping. The codes were verified with ABWR start-up experimental data. It was confirmed that the simulators were effective in simulating ABWR plant start-up behavior. (authors)

Evaluating automatically annotated treebanks for linguistic research

NARCIS (Netherlands)

Bloem, J.; Bański, P.; Kupietz, M.; Lüngen, H.; Witt, A.; Barbaresi, A.; Biber, H.; Breiteneder, E.; Clematide, S.

2016-01-01

This study discusses evaluation methods for linguists to use when employing an automatically annotated treebank as a source of linguistic evidence. While treebanks are usually evaluated with a general measure over all the data, linguistic studies often focus on a particular construction or a group

Profiling School Shooters: Automatic Text-Based Analysis

Directory of Open Access Journals (Sweden)

Yair eNeuman

2015-06-01

Full Text Available School shooters present a challenge to both forensic psychiatry and law enforcement agencies. The relatively small number of school shooters, their various charateristics, and the lack of in-depth analysis of all of the shooters prior to the shooting add complexity to our understanding of this problem. In this short paper, we introduce a new methodology for automatically profiling school shooters. The methodology involves automatic analysis of texts and the production of several measures relevant for the identification of the shooters. Comparing texts written by six school shooters to 6056 texts written by a comparison group of male subjects, we found that the shooters' texts scored significantly higher on the Narcissistic Personality dimension as well as on the Humilated and Revengeful dimensions. Using a ranking/priorization procedure, similar to the one used for the automatic identification of sexual predators, we provide support for the validity and relevance of the proposed methodology.

Commercially Available Digital Game Technology in the Classroom: Improving Automaticity in Mental-Maths in Primary-Aged Students

Science.gov (United States)

O'Rourke, John; Main, Susan; Hill, Susan M.

2017-01-01

In this paper we report on a study of the implementation of handheld game consoles (HGCs) in 10 Year four/five classrooms to develop student automaticity of mathematical calculations. The automaticity of mathematical calculations was compared for those students using the HGC and those being taught using traditional teaching methods. Over a school…

GROUP TECHNOLOGY IN CONTEXT OF THE PRODUCT CLASSIFICATION

Directory of Open Access Journals (Sweden)

Lenka Debnárová

2014-03-01

Full Text Available In the intensive competitive environment of the global economy, the survival of even the most well-established the world manufacturers depends on the ability to improve continuously quality while reducing costs. The resulting higher productivity is the key to market leadership and gaining sustainable competitive advantage. This paper outlines a group technology and classification of products which improve productivity, quality, inventory management of a company and reduce production times.

Development and evaluation of new semi-automatic TLD reader software

International Nuclear Information System (INIS)

Pathan, M.S.; Pradhan, S.M.; Palani Selvam, T.; Datta, D.

2018-01-01

Nowadays, all technology advancement is primarily focused on creating the user-friendly environment while operating any machine, also minimizing the human errors by automation of procedures. In the present study development and evaluation of new software for semi-automatic TLD badge reader (TLDBR-7B) is presented. The software provides an interactive interface and is compatible with latest windows OS as well as USB mode of data communication. Important new features of the software are automatic glow curve analysis for identifying any abnormality, event log register, user defined limits on TL count and time of temperature stabilization for readout interruption and auto reading resumption options

CURRENT STATE ANALYSIS OF AUTOMATIC BLOCK SYSTEM DEVICES, METHODS OF ITS SERVICE AND MONITORING

Directory of Open Access Journals (Sweden)

A. M. Beznarytnyy

2014-01-01

Full Text Available Purpose. Development of formalized description of automatic block system of numerical code based on the analysis of characteristic failures of automatic block system and procedure of its maintenance. Methodology. For this research a theoretical and analytical methods have been used. Findings. Typical failures of the automatic block systems were analyzed, as well as basic reasons of failure occur were found out. It was determined that majority of failures occurs due to defects of the maintenance system. Advantages and disadvantages of the current service technology of automatic block system were analyzed. Works that can be automatized by means of technical diagnostics were found out. Formal description of the numerical code of automatic block system as a graph in the state space of the system was carried out. Originality. The state graph of the numerical code of automatic block system that takes into account gradual transition from the serviceable condition to the loss of efficiency was offered. That allows selecting diagnostic information according to attributes and increasing the effectiveness of recovery operations in the case of a malfunction. Practical value. The obtained results of analysis and proposed the state graph can be used as the basis for the development of new means of diagnosing devices for automatic block system, which in turn will improve the efficiency and service of automatic block system devices in general.

Automatic tissue image segmentation based on image processing and deep learning

Science.gov (United States)

Kong, Zhenglun; Luo, Junyi; Xu, Shengpu; Li, Ting

2018-02-01

Image segmentation plays an important role in multimodality imaging, especially in fusion structural images offered by CT, MRI with functional images collected by optical technologies or other novel imaging technologies. Plus, image segmentation also provides detailed structure description for quantitative visualization of treating light distribution in the human body when incorporated with 3D light transport simulation method. Here we used image enhancement, operators, and morphometry methods to extract the accurate contours of different tissues such as skull, cerebrospinal fluid (CSF), grey matter (GM) and white matter (WM) on 5 fMRI head image datasets. Then we utilized convolutional neural network to realize automatic segmentation of images in a deep learning way. We also introduced parallel computing. Such approaches greatly reduced the processing time compared to manual and semi-automatic segmentation and is of great importance in improving speed and accuracy as more and more samples being learned. Our results can be used as a criteria when diagnosing diseases such as cerebral atrophy, which is caused by pathological changes in gray matter or white matter. We demonstrated the great potential of such image processing and deep leaning combined automatic tissue image segmentation in personalized medicine, especially in monitoring, and treatments.

Inertial confinement physics and technology group progress report (1994-1995)

International Nuclear Information System (INIS)

Associazione EURATOM-ENEA sulla fusione, Frascati

1998-05-01

The technical activities performed during the period 1994-1995 in the framework of the Inertial Fusion Physics and Technology Group, are reported. The theoretical and numerical work, as well as experiments performed with the Frascati ABC facility are described [it

Report on achievements of research and development of an automatic sewing system in fiscal 1988. Flexible sewing system; 1988 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Flexible sewing system

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on research of a production system by apparel types and systematization of an experiment plant. As the research on systematizing the experiment plant, the association is tackling with the researches on a high-speed cutting sub-system, a flexible sewing sub-system, a hi-tech assembling sub-system, and a three-dimensional flexible pressing sub-system. This paper reports the achievement of the research and development on the flexible sewing sub-system. For this sub-system, researches were made on the experiment plant and the systematization by dividing them into (1) a high-function pattern technology, (2) a stabilization pre-treatment technology, (3) a multi-functional sewing technology, and (4) a production control technology. For the technology (1), easy processibility patterns and production and processing information were studied. For the technology (2), a technology to evaluate characteristics of padding material properties, a temporary hardening technology, and a high-frequency induction heating device to bond the right side with the padding were studied. For the technology (3), stations for multi-functional sewing, automatic dart sewing, automatic piping, and automatic pocket attaching, and various carrier devices, inspection devices, and printed information recognition devices were studied. For the technology (4), a process designing expert system and an automatic machine management and control system were studied. (NEDO)

Automatic Conversion of a Conceptual Model to a Standard Multi-view Web Services Definition

Directory of Open Access Journals (Sweden)

Anass Misbah

2018-03-01

Full Text Available Information systems are becoming more and more heterogeneous and here comes the need to have more generic transformation algorithms and more automatic generation Meta rules. In fact, the large number of terminals, devices, operating systems, platforms and environments require a high level of adaptation. Therefore, it is becoming more and more difficult to validate, generate and implement manually models, designs and codes.Web services are one of the technologies that are used massively nowadays; hence, it is considered as one of technologies that require the most automatic rules of validation and automation. Many previous works have dealt with Web services by proposing new concepts such as Multi-view Web services, standard WSDL implementation of Multi-view Web services and even further Generic Meta rules for automatic generation of Multi-view Web services.In this work we will propose a new way of generating Multi-view Web ser-vices, which is based on an engine algorithm that takes as input both an initial Conceptual Model and user’s matrix and then unroll a generic algorithm to gen-erate dynamically a validated set of points of view. This set of points of view will be transformed to a standard WSDL implementation of Multi-view Web services by means of the automatic transformation Meta rules.

Child vocalization composition as discriminant information for automatic autism detection.

Science.gov (United States)

Xu, Dongxin; Gilkerson, Jill; Richards, Jeffrey; Yapanel, Umit; Gray, Sharmi

2009-01-01

Early identification is crucial for young children with autism to access early intervention. The existing screens require either a parent-report questionnaire and/or direct observation by a trained practitioner. Although an automatic tool would benefit parents, clinicians and children, there is no automatic screening tool in clinical use. This study reports a fully automatic mechanism for autism detection/screening for young children. This is a direct extension of the LENA (Language ENvironment Analysis) system, which utilizes speech signal processing technology to analyze and monitor a child's natural language environment and the vocalizations/speech of the child. It is discovered that child vocalization composition contains rich discriminant information for autism detection. By applying pattern recognition and machine learning approaches to child vocalization composition data, accuracy rates of 85% to 90% in cross-validation tests for autism detection have been achieved at the equal-error-rate (EER) point on a data set with 34 children with autism, 30 language delayed children and 76 typically developing children. Due to its easy and automatic procedure, it is believed that this new tool can serve a significant role in childhood autism screening, especially in regards to population-based or universal screening.

Automatic map generalisation from research to production

Science.gov (United States)

Nyberg, Rose; Johansson, Mikael; Zhang, Yang

2018-05-01

The manual work of map generalisation is known to be a complex and time consuming task. With the development of technology and societies, the demands for more flexible map products with higher quality are growing. The Swedish mapping, cadastral and land registration authority Lantmäteriet has manual production lines for databases in five different scales, 1 : 10 000 (SE10), 1 : 50 000 (SE50), 1 : 100 000 (SE100), 1 : 250 000 (SE250) and 1 : 1 million (SE1M). To streamline this work, Lantmäteriet started a project to automatically generalise geographic information. Planned timespan for the project is 2015-2022. Below the project background together with the methods for the automatic generalisation are described. The paper is completed with a description of results and conclusions.

Automatic Fiscal Stabilizers

Directory of Open Access Journals (Sweden)

Narcis Eduard Mitu

2013-11-01

Full Text Available Policies or institutions (built into an economic system that automatically tend to dampen economic cycle fluctuations in income, employment, etc., without direct government intervention. For example, in boom times, progressive income tax automatically reduces money supply as incomes and spendings rise. Similarly, in recessionary times, payment of unemployment benefits injects more money in the system and stimulates demand. Also called automatic stabilizers or built-in stabilizers.

The Automatic Test Features of the IDiPS Reactor Protection System

International Nuclear Information System (INIS)

Hur, Seop; Kim, Dong-Hoon; Hwang, In-Koo; Lee, Cheol-Kwon; Lee, Dong-Young

2007-01-01

The reactor protection system (RPS) is designed to minimize a propagation of abnormal or accident conditions of nuclear power plants. A digital RPS (Integrated Digital Protection System (IDiPS) RPS) is being developed in the Korea Nuclear Instrumentation and Control System (KNICS) R and D project. To make good use of the advantages of the digital technology, it is necessary to improve the reliability and availability of a system through automatic test features including an on-line testing, a self-diagnostics, an auto calibration, etc. This paper summarizes the system test strategy and the automatic test features of the IDiPS RPS

Automatic classification of blank substrate defects

Science.gov (United States)

Boettiger, Tom; Buck, Peter; Paninjath, Sankaranarayanan; Pereira, Mark; Ronald, Rob; Rost, Dan; Samir, Bhamidipati

2014-10-01

Mask preparation stages are crucial in mask manufacturing, since this mask is to later act as a template for considerable number of dies on wafer. Defects on the initial blank substrate, and subsequent cleaned and coated substrates, can have a profound impact on the usability of the finished mask. This emphasizes the need for early and accurate identification of blank substrate defects and the risk they pose to the patterned reticle. While Automatic Defect Classification (ADC) is a well-developed technology for inspection and analysis of defects on patterned wafers and masks in the semiconductors industry, ADC for mask blanks is still in the early stages of adoption and development. Calibre ADC is a powerful analysis tool for fast, accurate, consistent and automatic classification of defects on mask blanks. Accurate, automated classification of mask blanks leads to better usability of blanks by enabling defect avoidance technologies during mask writing. Detailed information on blank defects can help to select appropriate job-decks to be written on the mask by defect avoidance tools [1][4][5]. Smart algorithms separate critical defects from the potentially large number of non-critical defects or false defects detected at various stages during mask blank preparation. Mechanisms used by Calibre ADC to identify and characterize defects include defect location and size, signal polarity (dark, bright) in both transmitted and reflected review images, distinguishing defect signals from background noise in defect images. The Calibre ADC engine then uses a decision tree to translate this information into a defect classification code. Using this automated process improves classification accuracy, repeatability and speed, while avoiding the subjectivity of human judgment compared to the alternative of manual defect classification by trained personnel [2]. This paper focuses on the results from the evaluation of Automatic Defect Classification (ADC) product at MP Mask

Evaluation of the SYSTRAN Automatic Translation System. Report No. 5.

Science.gov (United States)

Chaumier, Jacques; And Others

The Commission of the European Communities has acquired an automatic translation system (SYSTRAN), which has been put into operation on an experimental basis. The system covers translation of English into French and comprises a dictionary for food science and technology containing 25,000 words or inflections and 4,500 expressions. This report…

Automatization and mechanization of welding in nuclear engineering

Energy Technology Data Exchange (ETDEWEB)

Shul' ma, I E; Kupin, N V

1986-02-01

The state of welding and cladding works, which constitute more than 12% of total labour content of NPP equipment production, is described. Special attention is paid to a considerable part of manual labour in the processes of thermal cutting and welding of joints inside the vessels. The necessity of perspective technology introduction is pointed out. It means, in particular, the introduction of technological complex robotics for automatic welding of pipes with tube plates in heat exchanger, the mechanization of cladding processes for sealing surfaces of locking equipment, facility equipment for the welding of steam generator vessels to bottoms by means of preliminary and concomitant heating devices.

Automatization and mechanization of welding in nuclear engineering

International Nuclear Information System (INIS)

Shul'ma, I.E.; Kupin, N.V.

1986-01-01

The state of welding and cladding works, which constitute more than 12% of total labour content of NPP equipment production, is described. Special attention is paid to a considerable part of manual labour in the processes of thermal cutting and welding of joints inside the vessels. The necessity of perspective technology introduction is pointed out. It means, in particular, the introduction of technological complex robotics for automatic welding of pipes with tube plates in heat exchanger, the mechanization of cladding processes for sealing surfaces of locking equipment, facility equipment for the welding of steam generator vessels to bottoms by means of preliminary and concomitant heating devices

Using group learning to enhance the implementation of information technology : The results of discourse analysis

NARCIS (Netherlands)

Bondarouk, Tatiana

2004-01-01

This thesis is about the influence of group interactional processes on the implementation of information technologies. The starting point of this research is the belief that it is neither the quality of the technology, nor that of the individual users, but the interactions among people in groups of

Individual Differences in Automatic Emotion Regulation Interact with Primed Emotion Regulation during an Anger Provocation

Directory of Open Access Journals (Sweden)

Ping Hu

2017-04-01

Full Text Available The current study investigated the interactive effects of individual differences in automatic emotion regulation (AER and primed emotion regulation strategy on skin conductance level (SCL and heart rate during provoked anger. The study was a 2 × 2 [AER tendency (expression vs. control × priming (expression vs. control] between subject design. Participants were assigned to two groups according to their performance on an emotion regulation-IAT (differentiating automatic emotion control tendency and automatic emotion expression tendency. Then participants of the two groups were randomly assigned to two emotion regulation priming conditions (emotion control priming or emotion expression priming. Anger was provoked by blaming participants for slow performance during a subsequent backward subtraction task. In anger provocation, SCL of individuals with automatic emotion control tendencies in the control priming condition was lower than of those with automatic emotion control tendencies in the expression priming condition. However, SCL of individuals with automatic emotion expression tendencies did no differ in the automatic emotion control priming or the automatic emotion expression priming condition. Heart rate during anger provocation was higher in individuals with automatic emotion expression tendencies than in individuals with automatic emotion control tendencies regardless of priming condition. This pattern indicates an interactive effect of individual differences in AER and emotion regulation priming on SCL, which is an index of emotional arousal. Heart rate was only sensitive to the individual differences in AER, and did not reflect this interaction. This finding has implications for clinical studies of the use of emotion regulation strategy training suggesting that different practices are optimal for individuals who differ in AER tendencies.

Ethical perspectives on emerging assistive technologies: insights from focus groups with stakeholders in long-term care facilities.

Science.gov (United States)

Dorsten, Aimee-Marie; Sifford, K Susan; Bharucha, Ashok; Mecca, Laurel Person; Wactlar, Howard

2009-03-01

ASSISTIVE TECHNOLOGIES ARE RELATIVELY novel tools for research and daily care in long-term care (LTC) facilities that are faced with the burgeoning of the older adult population and dwindling staffing resources. The degree to which stakeholders in LTC facilities are receptive to the use of these technologies is poorly understood. Eighteen semi-structured focus groups and one interview were conducted with relevant groups of stakeholders at seven LTC facilities in southwestern Pennsylvania. Common themes identified across all focus groups centered on concerns for privacy, autonomy, cost, and safety associated with implementation of novel technologies. The relative importance of each theme varied by stakeholder group as well as the perceived severity of cognitive and/or physical disability. Our findings suggest that ethical issues are critical to acceptance of novel technologies by their end users, and that stakeholder groups are interdependent and require shared communication about the acceptance of these emerging technologies.

System and Component Software Specification, Run-time Verification and Automatic Test Generation, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The following background technology is described in Part 5: Run-time Verification (RV), White Box Automatic Test Generation (WBATG). Part 5 also describes how WBATG...

Using automatic item generation to create multiple-choice test items.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis; Turner, Simon R

2012-08-01

Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

Security and Hyper-accurate Positioning Monitoring with Automatic Dependent Surveillance-Broadcast (ADS-B), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Lightning Ridge Technologies, working in collaboration with The Innovation Laboratory, Inc., extend Automatic Dependent Surveillance Broadcast (ADS-B) into a safe,...

Security and Hyper-accurate Positioning Monitoring with Automatic Dependent Surveillance-Broadcast (ADS-B), Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Lightning Ridge Technologies, LLC, working in collaboration with The Innovation Laboratory, Inc., extend Automatic Dependent Surveillance -- Broadcast (ADS-B) into a...

Mobile Technology Use Across Age Groups in Patients Eligible for Cardiac Rehabilitation: Survey Study.

Science.gov (United States)

Gallagher, Robyn; Roach, Kellie; Sadler, Leonie; Glinatsis, Helen; Belshaw, Julie; Kirkness, Ann; Zhang, Ling; Gallagher, Patrick; Paull, Glenn; Gao, Yan; Partridge, Stephanie Ruth; Parker, Helen; Neubeck, Lis

2017-10-24

Emerging evidence indicates mobile technology-based strategies may improve access to secondary prevention and reduce risk factors in cardiac patients. However, little is known about cardiac patients' use of mobile technology, particularly for health reasons and whether the usage varies across patient demographics. This study aimed to describe cardiac patients' use of mobile technology and to determine variations between age groups after adjusting for education, employment, and confidence with using mobile technology. Cardiac patients eligible for attending cardiac rehabilitation were recruited from 9 hospital and community sites across metropolitan and rural settings in New South Wales, Australia. Participants completed a survey on the use of mobile technology devices, features used, confidence with using mobile technology, willingness and interest in learning, and health-related use. The sample (N=282) had a mean age of 66.5 (standard deviation [SD] 10.6) years, 71.9% (203/282) were male, and 79.0% (223/282) lived in a metropolitan area. The most common diagnoses were percutaneous coronary intervention (33.3%, 94/282) and myocardial infarction (22.7%, 64/282). The majority (91.1%, 257/282) used at least one type of technology device, 70.9% (200/282) used mobile technology (mobile phone/tablet), and 31.9% (90/282) used all types. Technology was used by 54.6% (154/282) for health purposes, most often to access information on health conditions (41.4%, 117/282) and medications (34.8%, 98/282). Age had an important independent association with the use of mobile technology after adjusting for education, employment, and confidence. The youngest group (mobile technology than the oldest (>69 years) age group (odds ratio [OR] 4.45, 95% CI 1.46-13.55), 5 times more likely to use mobile apps (OR 5.00, 95% CI 2.01-12.44), and 3 times more likely to use technology for health-related reasons (OR 3.31, 95% CI 1.34-8.18). Compared with the older group, the middle age group (56

Starting the automation process by using group technology

Directory of Open Access Journals (Sweden)

Jorge Andrés García Barbosa

2004-09-01

Full Text Available This article describes starting-up an automation process based on applying group technology (GT. Mecanizados CNC, a company making matallurgical sector products, bases the layout (organisation and disposition of its machinery on the concept of manufacturing cells; production is programmed once the best location for the equipment has been determined. The order of making products and suitable setting up of tools for the machinery in the cells is established, aimed at minimising set up leading to achieving 15% improvement in productivity.

Automatic focusing system of BSST in Antarctic

Science.gov (United States)

Tang, Peng-Yi; Liu, Jia-Jing; Zhang, Guang-yu; Wang, Jian

2015-10-01

Automatic focusing (AF) technology plays an important role in modern astronomical telescopes. Based on the focusing requirement of BSST (Bright Star Survey Telescope) in Antarctic, an AF system is set up. In this design, functions in OpenCV is used to find stars, the algorithm of area, HFD or FWHM are used to degree the focus metric by choosing. Curve fitting method is used to find focus position as the method of camera moving. All these design are suitable for unattended small telescope.

Resource Lean and Portable Automatic Text Summarization

OpenAIRE

Hassel, Martin

2007-01-01

Today, with digitally stored information available in abundance, even for many minor languages, this information must by some means be filtered and extracted in order to avoid drowning in it. Automatic summarization is one such technique, where a computer summarizes a longer text to a shorter non-rendundant form. Apart from the major languages of the world there are a lot of languages for which large bodies of data aimed at language technology research to a high degree are lacking. There migh...

PLC Based Automatic Multistoried Car Parking System

OpenAIRE

Swanand S .Vaze; Rohan S. Mithari

2014-01-01

This project work presents the study and design of PLC based Automatic Multistoried Car Parking System. Multistoried car parking is an arrangement which is used to park a large number of vehicles in least possible place. For making this arrangement in a real plan very high technological instruments are required. In this project a prototype of such a model is made. This prototype model is made for accommodating twelve cars at a time. Availability of the space for parking is detecte...

Automatic modulation classification principles, algorithms and applications

CERN Document Server

Zhu, Zhechen

2014-01-01

Automatic Modulation Classification (AMC) has been a key technology in many military, security, and civilian telecommunication applications for decades. In military and security applications, modulation often serves as another level of encryption; in modern civilian applications, multiple modulation types can be employed by a signal transmitter to control the data rate and link reliability. This book offers comprehensive documentation of AMC models, algorithms and implementations for successful modulation recognition. It provides an invaluable theoretical and numerical comparison of AMC algo

Resource depletion promotes automatic processing: implications for distribution of practice.

Science.gov (United States)

Scheel, Matthew H

2010-12-01

Recent models of cognition include two processing systems: an automatic system that relies on associative learning, intuition, and heuristics, and a controlled system that relies on deliberate consideration. Automatic processing requires fewer resources and is more likely when resources are depleted. This study showed that prolonged practice on a resource-depleting mental arithmetic task promoted automatic processing on a subsequent problem-solving task, as evidenced by faster responding and more errors. Distribution of practice effects (0, 60, 120, or 180 sec. between problems) on rigidity also disappeared when groups had equal time on resource-depleting tasks. These results suggest that distribution of practice effects is reducible to resource availability. The discussion includes implications for interpreting discrepancies in the traditional distribution of practice effect.

Application of β plastic film thickness gauge in automatic production of agricultural film

International Nuclear Information System (INIS)

Liu Longzhi; Guo Juhao

1996-01-01

The author briefly explains the importance of agricultural film at home, and mainly explains the measuring principles of plastic film thickness, the design of β detector, the temperature compensation technology and the design of automatic control device

PACS quality control and automatic problem notifier

Science.gov (United States)

Honeyman-Buck, Janice C.; Jones, Douglas; Frost, Meryll M.; Staab, Edward V.

1997-05-01

One side effect of installing a clinical PACS Is that users become dependent upon the technology and in some cases it can be very difficult to revert back to a film based system if components fail. The nature of system failures range from slow deterioration of function as seen in the loss of monitor luminance through sudden catastrophic loss of the entire PACS networks. This paper describes the quality control procedures in place at the University of Florida and the automatic notification system that alerts PACS personnel when a failure has happened or is anticipated. The goal is to recover from a failure with a minimum of downtime and no data loss. Routine quality control is practiced on all aspects of PACS, from acquisition, through network routing, through display, and including archiving. Whenever possible, the system components perform self and between platform checks for active processes, file system status, errors in log files, and system uptime. When an error is detected or a exception occurs, an automatic page is sent to a pager with a diagnostic code. Documentation on each code, trouble shooting procedures, and repairs are kept on an intranet server accessible only to people involved in maintaining the PACS. In addition to the automatic paging system for error conditions, acquisition is assured by an automatic fax report sent on a daily basis to all technologists acquiring PACS images to be used as a cross check that all studies are archived prior to being removed from the acquisition systems. Daily quality control is preformed to assure that studies can be moved from each acquisition and contrast adjustment. The results of selected quality control reports will be presented. The intranet documentation server will be described with the automatic pager system. Monitor quality control reports will be described and the cost of quality control will be quantified. As PACS is accepted as a clinical tool, the same standards of quality control must be established

Finding weak points automatically

International Nuclear Information System (INIS)

Archinger, P.; Wassenberg, M.

1999-01-01

Operators of nuclear power stations have to carry out material tests at selected components by regular intervalls. Therefore a full automaticated test, which achieves a clearly higher reproducibility, compared to part automaticated variations, would provide a solution. In addition the full automaticated test reduces the dose of radiation for the test person. (orig.) [de

Automatic inspection Pads second generation; Inspeccion automatica de pastillas de segunda generacion

Energy Technology Data Exchange (ETDEWEB)

Gallardo-Lancho gonzalez, J. F.

2010-07-01

In recent years, development has addressed Enusa a second generation robot for automatic inspection of tablets incorporating the following advances: more advanced systems that improve vision quality inspection equipment, conducting the inspection in line with the grinding operation, increased productivity of the inspection process to be unnecessary pills buildup in trays and lay-out of the most rational equipment allowing cleaning it easier and faster. This second generation machine is already part of the automatic inspection equipment developed by Enusa and is an example of the ongoing commitment to the development Enusa and innovation in nuclear technology.

The system for automatic dose rate measurements by mobile groups in field

International Nuclear Information System (INIS)

Drabova, D.; Filgas, R.; Cespirova, I.; Ejemova, M.

1998-01-01

The comparison of characteristics between a pressurized ionization chamber, plastic scintillator and proportional counter is given. Based on requirements and comparison of properties of various probes, the system for automatic dose rate measurement and integration of geographic co-ordinates in field was designed and tested.The system consists of proportional counter. This is so-called intelligent probe can be easily connected to a personal computer. The probe measures in the energy range 30 keV - 1.3 MeV with reasonable energy and angular response, it can measure the dose rate in the range 50 nSv/h - 1 Sv/h with the typical efficiency 9.5 imp/s/μSv/h. The probe is fixed in the holder placed on the front mask of a car. For the simultaneous determination of geographical co-ordinates the personal GPS navigator Garmin 95 is used. Both devices are controlled by a notebook via two serial ports. The second serial port that is not quite common in notebook can be easily realised by a PCMCIA card. The notebook is used in the field by a mobile group can be transmitted to the assessment centre by the cellular GSM phone. The system Nokia 2110 connected to notebook by PCMCIA card is used. The whole system is powered up from the car battery. The system is controlled by specially developed software. The software was developed in the FoxPro 2.5 environment and works under MS-DOS 6.22. It has no problems to work in Windows 95 DOS window. The results of dose rate measurements obtained during route monitoring are stored in files. They can be displayed on a graphic screen, presenting the geographical distribution of the dose rate values colour coded on a map and the time sequence of the measured data. (authors)

Automatic road traffic safety management system in urban areas

Directory of Open Access Journals (Sweden)

Oskarbski Jacek

2017-01-01

Full Text Available Traffic incidents and accidents contribute to decreasing levels of transport system reliability and safety. Traffic management and emergency systems on the road, using, among others, automatic detection, video surveillance, communication technologies and institutional solutions improve the organization of the work of various departments involved in traffic and safety management. Automation of incident management helps to reduce the time of a rescue operation as well as of the normalization of the flow of traffic after completion of a rescue operation, which also affects the reduction of the risk of secondary accidents and contributes to reducing their severity. The paper presents the possibility of including city traffic departments in the process of incident management. The results of research on the automatic incident detection in cities are also presented.

TU-H-CAMPUS-JeP1-02: Fully Automatic Verification of Automatically Contoured Normal Tissues in the Head and Neck

Energy Technology Data Exchange (ETDEWEB)

McCarroll, R [UT MD Anderson Cancer Center, Houston, TX (United States); UT Health Science Center, Graduate School of Biomedical Sciences, Houston, TX (United States); Beadle, B; Yang, J; Zhang, L; Kisling, K; Balter, P; Stingo, F; Nelson, C; Followill, D; Court, L [UT MD Anderson Cancer Center, Houston, TX (United States); Mejia, M [University of Santo Tomas Hospital, Manila, Metro Manila (Philippines)

2016-06-15

Purpose: To investigate and validate the use of an independent deformable-based contouring algorithm for automatic verification of auto-contoured structures in the head and neck towards fully automated treatment planning. Methods: Two independent automatic contouring algorithms [(1) Eclipse’s Smart Segmentation followed by pixel-wise majority voting, (2) an in-house multi-atlas based method] were used to create contours of 6 normal structures of 10 head-and-neck patients. After rating by a radiation oncologist, the higher performing algorithm was selected as the primary contouring method, the other used for automatic verification of the primary. To determine the ability of the verification algorithm to detect incorrect contours, contours from the primary method were shifted from 0.5 to 2cm. Using a logit model the structure-specific minimum detectable shift was identified. The models were then applied to a set of twenty different patients and the sensitivity and specificity of the models verified. Results: Per physician rating, the multi-atlas method (4.8/5 point scale, with 3 rated as generally acceptable for planning purposes) was selected as primary and the Eclipse-based method (3.5/5) for verification. Mean distance to agreement and true positive rate were selected as covariates in an optimized logit model. These models, when applied to a group of twenty different patients, indicated that shifts could be detected at 0.5cm (brain), 0.75cm (mandible, cord), 1cm (brainstem, cochlea), or 1.25cm (parotid), with sensitivity and specificity greater than 0.95. If sensitivity and specificity constraints are reduced to 0.9, detectable shifts of mandible and brainstem were reduced by 0.25cm. These shifts represent additional safety margins which might be considered if auto-contours are used for automatic treatment planning without physician review. Conclusion: Automatically contoured structures can be automatically verified. This fully automated process could be used to

The systems of automatic weight control of vehicles in the road and rail transport in Poland

Directory of Open Access Journals (Sweden)

2011-09-01

Full Text Available . Condition of roads in Poland, despite the on-going modernisation works is still unsatisfactory. One reason is the excessive wear caused by overloaded vehicles. This problem also applies to rail transport, although to a much lesser extent. One solution may be the system of automatic weight control of road and rail vehicles. The article describes the legal and organizational conditions of oversize vehicles inspection in Poland. Characterized current practices weighing road vehicles, based on measurements of static technology. The article includes the description of the existing applications of the automatic dynamic weighing technology, known as systems WIM (Weigh in Motion. Additionally, the weighing technology and construction of weighing stands in road and rail are characterized. The article ends with authors' conclusions indicating the direction and ways of improving the weighing control systems for vehicles.

SIMULASI GROUP TECHNOLOGY SYSTEM UNTUK MEMINIMALKAN BIAYA MATERIAL HANDLING DENGAN METODE HEURISTIC

Directory of Open Access Journals (Sweden)

Much. Djunaidi

2006-04-01

Full Text Available Group Technology System merupakan metode pengaturan fasilitas produksi (machine groups yang dibutuhkan untuk memproses suatu part family tertentu ke dalam sel-sel manufaktur. Pengaturan tata letak di CV. Sonytex yang berdasarkan process layout mengakibatkan perusahaan menghadapi permasalahan berupa tingginya kebutuhan material handling. Salah satu kriteria kinerja dalam pembentukan sel manufaktur pada GTS adalah meminimasi total jarak material handling, sehingga dapat mengurangi biaya material handling dan meningkatkan produktivitas. Dalam penelitian ini digunakan tiga metode, yaitu Bond Energy Algorithm (BEA, Rank Order Clustering (ROC dan Rank Order Clustering 2 (ROC2. Hasil dari penelitian ini adalah dengan menerapkan group technology systems diperoleh total pengurangan jarak material handling sebesar 70 m dan penghematan biaya material handling sebesar Rp 1.534.978,-. Berdasarkan model simulasi, relayout dengan metode BEA meningkatkan jumlah produksi sebesar 1 unit produk/hari dan penurunan waktu tunggu sebesar 0,575 menit.

SELFADJUSTING AUTOMATIC CONTROL OF SOWING UNIT

Directory of Open Access Journals (Sweden)

A. Yu. Izmaylov

2015-01-01

Full Text Available The selfadjusting automatic control of sowing unit and differentiated introduction of mineral fertilizers doses according to agrochemical indicators of the soil (precision agriculture are used wider nowadays. It was defined that the main requirement to the differentiated seeding and fertilizing is an accuracy and duration of transition from one norm to another. Established that at a speed of unit of 10 km/h object moves for 0.5 s about on 1.5 m and more. Thus in this device the radio channel originated differentiated correction is updated in 10 s, and in the RTK mode - 0.5-2 s that breaks the accuracy of introduction of seeds and fertilizers. The block schematic diagram of system of automatic control of technological process of seeding and mineral fertilizing with use of navigation means of machine-tractor aggregates orientation in the field and technical means for realization of technology of precision agriculture at sowing and fertilizers application due to electronic maps of soil fertility and navigation satellite systems was worked out. It was noted that for regulation of a fertilizing dose it is necessary to complete the unit with the electric drive, and for error reduction use navigation GLONASS, GPS, Galileo receivers. To tracking of four leading navigation systems GPS/GLONASS/Galileo/Compass receiver with 32 canals developed by domestic-owned firm «KB NAVIS» was suggested. It was established that the automated device created by All-Russia Research Institute of Mechanization for Agriculture information based on NAVSTAR and GLONASS/GPS system successfully operates seeding and make possible the differentiate fertilizing.

KIT/KPS of Qinshan phase-II and a discussion on integrated information management and automatic control

International Nuclear Information System (INIS)

Yan Changhui

2001-01-01

Centralized Data Processing and Safety Panel (KIT/KPS) of Qinshan Phase-II power project is described, and the necessity and engineering scheme is presented of integrated information management and automatic control that would achieve in power plant according to the technology scheme and technology trait of KIT/KPS

Automatic Feature Selection and Weighting for the Formation of Homogeneous Groups for Regional Intensity-Duration-Frequency (IDF) Curve Estimation

Science.gov (United States)

Yang, Z.; Burn, D. H.

2017-12-01

Extreme rainfall events can have devastating impacts on society. To quantify the associated risk, the IDF curve has been used to provide the essential rainfall-related information for urban planning. However, the recent changes in the rainfall climatology caused by climate change and urbanization have made the estimates provided by the traditional regional IDF approach increasingly inaccurate. This inaccuracy is mainly caused by two problems: 1) The ineffective choice of similarity indicators for the formation of a homogeneous group at different regions; and 2) An inadequate number of stations in the pooling group that does not adequately reflect the optimal balance between group size and group homogeneity or achieve the lowest uncertainty in the rainfall quantiles estimates. For the first issue, to consider the temporal difference among different meteorological and topographic indicators, a three-layer design is proposed based on three stages in the extreme rainfall formation: cloud formation, rainfall generation and change of rainfall intensity above urban surface. During the process, the impacts from climate change and urbanization are considered through the inclusion of potential relevant features at each layer. Then to consider spatial difference of similarity indicators for the homogeneous group formation at various regions, an automatic feature selection and weighting algorithm, specifically the hybrid searching algorithm of Tabu search, Lagrange Multiplier and Fuzzy C-means Clustering, is used to select the optimal combination of features for the potential optimal homogenous groups formation at a specific region. For the second issue, to compare the uncertainty of rainfall quantile estimates among potential groups, the two sample Kolmogorov-Smirnov test-based sample ranking process is used. During the process, linear programming is used to rank these groups based on the confidence intervals of the quantile estimates. The proposed methodology fills the gap

Special Issue on Automatic Application Tuning for HPC Architectures

Directory of Open Access Journals (Sweden)

Siegfried Benkner

2014-01-01

Full Text Available High Performance Computing architectures have become incredibly complex and exploiting their full potential is becoming more and more challenging. As a consequence, automatic performance tuning (autotuning of HPC applications is of growing interest and many research groups around the world are currently involved. Autotuning is still a rapidly evolving research field with many different approaches being taken. This special issue features selected papers presented at the Dagstuhl seminar on “Automatic Application Tuning for HPC Architectures” in October 2013, which brought together researchers from the areas of autotuning and performance analysis in order to exchange ideas and steer future collaborations.

Microprocessor controlled system for automatic and semi-automatic syntheses of radiopharmaceuticals

International Nuclear Information System (INIS)

Ruth, T.J.; Adam, M.J.; Morris, D.; Jivan, S.

1986-01-01

A computer based system has been constructed to control the automatic synthesis of 2-deoxy-2-( 18 F)fluoro-D-glucose and is also being used in the development of an automatic synthesis of L-6-( 18 F)fluorodopa. (author)

The ''controbloc'', a programmable automatic device for the 1,300 MW generation of power stations

International Nuclear Information System (INIS)

Pralus, B.; Winzelle, J.C.

1983-01-01

Technological progress in the field of microelectronics has led to the development of an automatic control device, the ''controbloc'', for operating and controlling nuclear power plants. The ''controbloc'' will be used in automatic systems with a high degree of safety and versatility and is now being installed in the first of the new generation 1,300 MW power stations. The main characteristics of the device and the evaluation tests which have been carried out are described [fr

SEVA Linkers: A Versatile and Automatable DNA Backbone Exchange Standard for Synthetic Biology

DEFF Research Database (Denmark)

Kim, Se Hyeuk; Cavaleiro, Mafalda; Rennig, Maja

2016-01-01

flexibility, and different researchers prefer and master different molecular technologies. Here, we describe a new, highly versatile and automatable standard “SEVA linkers” for vector exchange. SEVA linkers enable backbone swapping with 20 combinations of classical enzymatic restriction/ligation, Gibson...

Exporting automatic vehicle SNM monitoring technology

International Nuclear Information System (INIS)

York, R.L.; Fehlau, P.E.; Close, D.A.

1995-01-01

Controlling the transportation of nuclear materials is still one of the most effective nuclear proliferation barriers. The recent increase of global nuclear material proliferation has expanded the application of vehicle monitor technology to prevent the diversion of special nuclear material across international borders. To satisfy this new application, a high-sensitivity vehicle monitor, which is easy to install and capable of operating in high-traffic areas, is required. A study of a new detector configuration for a drive-through vehicle monitor is discussed in this paper

Automatic Camera Control

DEFF Research Database (Denmark)

Burelli, Paolo; Preuss, Mike

2014-01-01

Automatically generating computer animations is a challenging and complex problem with applications in games and film production. In this paper, we investigate howto translate a shot list for a virtual scene into a series of virtual camera configurations — i.e automatically controlling the virtual...

Comparison of liver volumetry on contrast‐enhanced CT images: one semiautomatic and two automatic approaches

Science.gov (United States)

Cai, Wei; He, Baochun; Fang, Chihua

2016-01-01

This study was to evaluate the accuracy, consistency, and efficiency of three liver volumetry methods— one interactive method, an in‐house‐developed 3D medical Image Analysis (3DMIA) system, one automatic active shape model (ASM)‐based segmentation, and one automatic probabilistic atlas (PA)‐guided segmentation method on clinical contrast‐enhanced CT images. Forty‐two datasets, including 27 normal liver and 15 space‐occupying liver lesion patients, were retrospectively included in this study. The three methods — one semiautomatic 3DMIA, one automatic ASM‐based, and one automatic PA‐based liver volumetry — achieved an accuracy with VD (volume difference) of −1.69%,−2.75%, and 3.06% in the normal group, respectively, and with VD of −3.20%,−3.35%, and 4.14% in the space‐occupying lesion group, respectively. However, the three methods achieved an efficiency of 27.63 mins, 1.26 mins, 1.18 mins on average, respectively, compared with the manual volumetry, which took 43.98 mins. The high intraclass correlation coefficient between the three methods and the manual method indicated an excellent agreement on liver volumetry. Significant differences in segmentation time were observed between the three methods (3DMIA, ASM, and PA) and the manual volumetry (pvolumetries (ASM and PA) and the semiautomatic volumetry (3DMIA) (pvolumetry agreed well with manual gold standard in both the normal liver group and the space‐occupying lesion group. The ASM‐ and PA‐based automatic segmentation have better efficiency in clinical use. PACS number(s): 87.55.‐x PMID:27929487

Environmental Technologies Summary Book

International Nuclear Information System (INIS)

2009-02-01

This book lists the companies and their technology, which have new excellent technology authentication and technology verification. They are as in the following : sewage advanced treatment technology using a three-stage Bio-Ceramic Filtration by Shinwoo engineering.co.kr, Twist Filter by Sungshin engineering.co.kr, Sewage advanced treatment technology using CIMEN-DOC by Taeyeong/CI biotech.co.kr, DeNipho using pump ejector and Bio Green Media by Green Technology.co.kr, Automatic integrated management system using Envi-SIS by Sallasanup.com Kozone.co.kr and Geoworks.co.kr.

Outcomes in cervical screening using various cytology technologies

DEFF Research Database (Denmark)

Barken, Sidsel S; Rebolj, Matejka; Lynge, Elsebeth

2013-01-01

of samples with atypical squamous cells of undetermined significance or worse (≥ASCUS) by age and technology phase. We included 391 140 samples. The proportion of ≥ASCUS increased steadily from 3.8% in phase 1 to 6.0% in phase 5. This pattern varied considerably across age groups. In women aged 23-34 years......Unlike for human papillomavirus screening, little is known about the possible age-dependent variation in the outcomes of cervical cytology screening. The aim of our study was to describe age-related outcomes of five cytological technologies in a population-based screening program targeting women...... aged 23-59 years. All cervical cytology from women residing in Copenhagen has been analyzed in the laboratory of the Department of Pathology, Hvidovre University Hospital. We studied five technology phases: (1) conventional cytology with manual reading, (2) conventional cytology with 50% automatically...

Evaluation of Public E-Services and Information Technology Accessibility in Different Social Groups

Directory of Open Access Journals (Sweden)

Ramutė Naujikienė

2012-12-01

Full Text Available The purpose of this study is to develop an approach based on the social quality evaluation square model for evaluation of information technology usage in different social groups. Componential view to the accessibility of e-services including IT means providing the possibility to research the influences of different life conditions to usage of the public e-services. The task of this empirical study is directed towards revealing the differences of e-inclusion and e-services accessibility for social groups of citizens of Lithuania, and to compare this accessibility data with other EU countries.Design/methodology/approach—the approach is based on the square model of social quality evaluation of information technology usage in different social groups. The social division square model includes an assessment of quality according to the evaluation of socioeconomic security, social inclusion, social cohesion, and empowerment. Empowerment can be defined as consisting of individual or collective decisions to act on one’s own life.Findings—the results are demonstrated by the accessibility of public e-services data, which are evaluated by the quality of social group development according to IT applications. The hypothesis was confirmed that the e-government activities can be realized by properly selecting and installing technologies, and using technology facilities. E-services influence the capabilities of state officials to apply modern technology and increase the availability of e-services for social groups. Results consist of individual or collective decisions to act on one’s own life, to implementation of effective information technologies in the e-government activities and using of e-services. An important indicator is the implementation of e-services in the activity of citizens. It is submitted as the index of e-participation in dealing with the activities of citizens and the possibilities of authorities directly related with providing services

Evaluation of Public E-Services and Information Technology Accessibility in Different Social Groups

Directory of Open Access Journals (Sweden)

Ramutė Naujikienė

2013-02-01

Full Text Available The purpose of this study is to develop an approach based on the social quality evaluation square model for evaluation of information technology usage in different social groups. Componential view to the accessibility of e-services including IT means providing the possibility to research the influences of different life conditions to usage of the public e-services. The task of this empirical study is directed towards revealing the differences of e-inclusion and e-services accessibility for social groups of citizens of Lithuania, and to compare this accessibility data with other EU countries. Design/methodology/approach—the approach is based on the square model of social quality evaluation of information technology usage in different social groups. The social division square model includes an assessment of quality according to the evaluation of socioeconomic security, social inclusion, social cohesion, and empowerment. Empowerment can be defined as consisting of individual or collective decisions to act on one’s own life. Findings—the results are demonstrated by the accessibility of public e-services data, which are evaluated by the quality of social group development according to IT applications. The hypothesis was confirmed that the e-government activities can be realized by properly selecting and installing technologies, and using technology facilities. E-services influence the capabilities of state officials to apply modern technology and increase the availability of e-services for social groups. Results consist of individual or collective decisions to act on one’s own life, to implementation of effective information technologies in the e-government activities and using of e-services. An important indicator is the implementation of e-services in the activity of citizens. It is submitted as the index of e-participation in dealing with the activities of citizens and the possibilities of authorities directly related with providing

Automatic Hydraulic Jack Inbuilt In A Four Wheeler

Directory of Open Access Journals (Sweden)

Parth M. Patel

2015-08-01

Full Text Available With increasing levels of technology efforts being put to increase the comfort and safety. These can be done by implementation of better design. This paper describes Implementation of Automatic hydraulic jack Mechanism in a four wheeler itself. The jack will be powered by the battery. So at a time of puncture to replace the wheel one has to just press the button and the jack which is fitted in the car itself will lift the car.

Motor automaticity in Parkinson’s disease

Science.gov (United States)

Wu, Tao; Hallett, Mark; Chan, Piu

2017-01-01

Bradykinesia is the most important feature contributing to motor difficulties in Parkinson’s disease (PD). However, the pathophysiology underlying bradykinesia is not fully understood. One important aspect is that PD patients have difficulty in performing learned motor skills automatically, but this problem has been generally overlooked. Here we review motor automaticity associated motor deficits in PD, such as reduced arm swing, decreased stride length, freezing of gait, micrographia and reduced facial expression. Recent neuroimaging studies have revealed some neural mechanisms underlying impaired motor automaticity in PD, including less efficient neural coding of movement, failure to shift automated motor skills to the sensorimotor striatum, instability of the automatic mode within the striatum, and use of attentional control and/or compensatory efforts to execute movements usually performed automatically in healthy people. PD patients lose previously acquired automatic skills due to their impaired sensorimotor striatum, and have difficulty in acquiring new automatic skills or restoring lost motor skills. More investigations on the pathophysiology of motor automaticity, the effect of L-dopa or surgical treatments on automaticity, and the potential role of using measures of automaticity in early diagnosis of PD would be valuable. PMID:26102020

Reasonable selection of automatic exposure density compensation of ionization chamber

International Nuclear Information System (INIS)

Tian Fuqiang; Nie Shikun; Wang Zhihong; Zeng Jianhua; Cheng Guanxun; Xiang Qian

2000-01-01

Objective: To introduce and discuss the methods of reasonable selection of the automatic exposure density compensation of ionization chamber to provide important references for clinic radiograph and improve the quality of images. Methods: X-ray machines with ionization chamber automatic exposure control system were used in this study. Compared with the standard baseline of the normal density of the object radio-graphed, the reasonable ionization chamber density compensation (IDC) was chosen and compared with the radiograph without IDC through a water model test and density measurement. Results: There was no significant difference between two groups (100 films each) which were randomly divided to the group with or without IDC, but there was statistically significant difference in the special groups. Conclusion: To select suitable IDC is very important for guaranteeing radiographic quality, moreover, to establish a suitable kV is also necessary, usually it is 10 to 20 kV higher than the optioned kV. The relative factors must be fixed relatively and be matched correctly

CMOS analog integrated circuit design technology; CMOS anarogu IC sekkei gijutsu

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, H.; Fujisawa, A. [Fuji Electric Co. Ltd., Tokyo (Japan)

2000-08-10

In the field of the LSI (large scale integrated circuit) in rapid progress toward high integration and advanced functions, CAD (computer-aided design) technology has become indispensable to LSI development within a short period. Fuji Electric has developed design technologies and automatic design system to develop high-quality analog ICs (integrated circuits), including power supply ICs. within a short period. This paper describes CMOS (complementary metal-oxide semiconductor) analog macro cell, circuit simulation, automatic routing, and backannotation technologies. (author)

Development of Korea telecommunication technology

International Nuclear Information System (INIS)

1992-06-01

It concentrates on development of Korea telecommunication technology, which is made up seven chapters. It gives description of manual central telephone exchange or private automatic telephone exchange, transmission technology on wire line and cable line technology and optical transmission, radio communication technology on mobile and natural satellite communication, network technology with intelligent network, broadband ISDN and packet switched Data Network, terminal technology with telephone and data communication terminal and development of Information Technology in Korea. It has an appendix about development of military communication system.

Automatic surveying techniques

International Nuclear Information System (INIS)

Sah, R.

1976-01-01

In order to investigate the feasibility of automatic surveying methods in a more systematic manner, the PEP organization signed a contract in late 1975 for TRW Systems Group to undertake a feasibility study. The completion of this study resulted in TRW Report 6452.10-75-101, dated December 29, 1975, which was largely devoted to an analysis of a survey system based on an Inertial Navigation System. This PEP note is a review and, in some instances, an extension of that TRW report. A second survey system which employed an ''Image Processing System'' was also considered by TRW, and it will be reviewed in the last section of this note. 5 refs., 5 figs., 3 tabs

Application of neural networks to group technology

Science.gov (United States)

Caudell, Thomas P.; Smith, Scott D. G.; Johnson, G. C.; Wunsch, Donald C., II

1991-08-01

Adaptive resonance theory (ART) neural networks are being developed for application to the industrial engineering problem of group technology--the reuse of engineering designs. Two- and three-dimensional representations of engineering designs are input to ART-1 neural networks to produce groups or families of similar parts. These representations, in their basic form, amount to bit maps of the part, and can become very large when the part is represented in high resolution. This paper describes an enhancement to an algorithmic form of ART-1 that allows it to operate directly on compressed input representations and to generate compressed memory templates. The performance of this compressed algorithm is compared to that of the regular algorithm on real engineering designs and a significant savings in memory storage as well as a speed up in execution is observed. In additions, a `neural database'' system under development is described. This system demonstrates the feasibility of training an ART-1 network to first cluster designs into families, and then to recall the family when presented a similar design. This application is of large practical value to industry, making it possible to avoid duplication of design efforts.

Adaptive and automatic red blood cell counting method based on microscopic hyperspectral imaging technology

Science.gov (United States)

Liu, Xi; Zhou, Mei; Qiu, Song; Sun, Li; Liu, Hongying; Li, Qingli; Wang, Yiting

2017-12-01

Red blood cell counting, as a routine examination, plays an important role in medical diagnoses. Although automated hematology analyzers are widely used, manual microscopic examination by a hematologist or pathologist is still unavoidable, which is time-consuming and error-prone. This paper proposes a full-automatic red blood cell counting method which is based on microscopic hyperspectral imaging of blood smears and combines spatial and spectral information to achieve high precision. The acquired hyperspectral image data of the blood smear in the visible and near-infrared spectral range are firstly preprocessed, and then a quadratic blind linear unmixing algorithm is used to get endmember abundance images. Based on mathematical morphological operation and an adaptive Otsu’s method, a binaryzation process is performed on the abundance images. Finally, the connected component labeling algorithm with magnification-based parameter setting is applied to automatically select the binary images of red blood cell cytoplasm. Experimental results show that the proposed method can perform well and has potential for clinical applications.

Global Distribution Adjustment and Nonlinear Feature Transformation for Automatic Colorization

Directory of Open Access Journals (Sweden)

Terumasa Aoki

2018-01-01

Full Text Available Automatic colorization is generally classified into two groups: propagation-based methods and reference-based methods. In reference-based automatic colorization methods, color image(s are used as reference(s to reconstruct original color of a gray target image. The most important task here is to find the best matching pairs for all pixels between reference and target images in order to transfer color information from reference to target pixels. A lot of attractive local feature-based image matching methods have already been developed for the last two decades. Unfortunately, as far as we know, there are no optimal matching methods for automatic colorization because the requirements for pixel matching in automatic colorization are wholly different from those for traditional image matching. To design an efficient matching algorithm for automatic colorization, clustering pixel with low computational cost and generating descriptive feature vector are the most important challenges to be solved. In this paper, we present a novel method to address these two problems. In particular, our work concentrates on solving the second problem (designing a descriptive feature vector; namely, we will discuss how to learn a descriptive texture feature using scaled sparse texture feature combining with a nonlinear transformation to construct an optimal feature descriptor. Our experimental results show our proposed method outperforms the state-of-the-art methods in terms of robustness for color reconstruction for automatic colorization applications.

Automatic Photoelectric Telescope Service

International Nuclear Information System (INIS)

Genet, R.M.; Boyd, L.J.; Kissell, K.E.; Crawford, D.L.; Hall, D.S.; BDM Corp., McLean, VA; Kitt Peak National Observatory, Tucson, AZ; Dyer Observatory, Nashville, TN)

1987-01-01

Automatic observatories have the potential of gathering sizable amounts of high-quality astronomical data at low cost. The Automatic Photoelectric Telescope Service (APT Service) has realized this potential and is routinely making photometric observations of a large number of variable stars. However, without observers to provide on-site monitoring, it was necessary to incorporate special quality checks into the operation of the APT Service at its multiple automatic telescope installation on Mount Hopkins. 18 references

Automatic imitation: A meta-analysis.

Science.gov (United States)

Cracco, Emiel; Bardi, Lara; Desmet, Charlotte; Genschow, Oliver; Rigoni, Davide; De Coster, Lize; Radkova, Ina; Deschrijver, Eliane; Brass, Marcel

2018-05-01

Automatic imitation is the finding that movement execution is facilitated by compatible and impeded by incompatible observed movements. In the past 15 years, automatic imitation has been studied to understand the relation between perception and action in social interaction. Although research on this topic started in cognitive science, interest quickly spread to related disciplines such as social psychology, clinical psychology, and neuroscience. However, important theoretical questions have remained unanswered. Therefore, in the present meta-analysis, we evaluated seven key questions on automatic imitation. The results, based on 161 studies containing 226 experiments, revealed an overall effect size of g z = 0.95, 95% CI [0.88, 1.02]. Moderator analyses identified automatic imitation as a flexible, largely automatic process that is driven by movement and effector compatibility, but is also influenced by spatial compatibility. Automatic imitation was found to be stronger for forced choice tasks than for simple response tasks, for human agents than for nonhuman agents, and for goalless actions than for goal-directed actions. However, it was not modulated by more subtle factors such as animacy beliefs, motion profiles, or visual perspective. Finally, there was no evidence for a relation between automatic imitation and either empathy or autism. Among other things, these findings point toward actor-imitator similarity as a crucial modulator of automatic imitation and challenge the view that imitative tendencies are an indicator of social functioning. The current meta-analysis has important theoretical implications and sheds light on longstanding controversies in the literature on automatic imitation and related domains. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

The FAST-DATA System: Fully Automatic Stochastic Technology for Data Acquisition, Transmission, and Analysis

International Nuclear Information System (INIS)

Albrecht, R.W.; Crowe, R.D.; McGuire, J.J.

1978-01-01

The potential to automatically collect, classify, and report on stochastic data (signals with random, time-varying components) from power plants has long been discussed by utilities, government, industries, national laboratories and universities. It has become clear to all concerned that such signals often contain information about plant conditions which may provide the basis for increased plant availability through early detection and warning of developing malfunctions. Maintenance can then be scheduled at opportune times. Inopportune failures of major and minor power plant components are a major cause of down-time and detracts significantly from availability of the plant. A complete system to realize automatic stochastic data processing has been conceptually designed. Development of the FAST-DATA system has been initiated through a program of periodic measurements performed on the vibration and loose parts monitoring system of the Trojan reactor (1130-MW(e)PWR) operated by Portland General Electric Company. The development plan for the system consists of a six-step procedure. The initial steps depend on a significant level of human involvement. In the course of development of the system, the routine duties of operators and analysts are gradually replaced by computerized automatic data handling procedures. In the final configuration, the operator and analysts are completely freed of routine chores by logical machinery. The results achieved to date from actual application of the proof-of-principle system are discussed. The early developmental phases have concentrated on system organization and examination of a representative data base. Preliminary results from the signature analysis program using Trojan data indicate that the performance specifications predicted for the FAST-DATA system are achievable in practice. (author)

School Finance and Technology: A Case Study Using Grid and Group Theory to Explore the Connections

Science.gov (United States)

Case, Stephoni; Harris, Edward L.

2014-01-01

Using grid and group theory (Douglas 1982, 2011), the study described in this article examined the intersections of technology and school finance in four schools located in districts differing in size, wealth, and commitment to technology integration. In grid and group theory, grid refers to the degree to which policies and role prescriptions…

Analysis on machine tool systems using spindle vibration monitoring for automatic tool changer

OpenAIRE

Shang-Liang Chen; Yin-Ting Cheng; Chin-Fa Su

2015-01-01

Recently, the intelligent systems of technology have become one of the major items in the development of machine tools. One crucial technology is the machinery status monitoring function, which is required for abnormal warnings and the improvement of cutting efficiency. During processing, the mobility act of the spindle unit determines the most frequent and important part such as automatic tool changer. The vibration detection system includes the development of hardware and software, such as ...

Man-system interface based on automatic speech recognition: integration to a virtual control desk

Energy Technology Data Exchange (ETDEWEB)

Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A.; Pereira, Claudio M.N.A.; Aghina, Mauricio Alves C., E-mail: calexandre@ien.gov.b, E-mail: mol@ien.gov.b, E-mail: cmnap@ien.gov.b, E-mail: mag@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Nomiya, Diogo V., E-mail: diogonomiya@gmail.co [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)

2009-07-01

This work reports the implementation of a man-system interface based on automatic speech recognition, and its integration to a virtual nuclear power plant control desk. The later is aimed to reproduce a real control desk using virtual reality technology, for operator training and ergonomic evaluation purpose. An automatic speech recognition system was developed to serve as a new interface with users, substituting computer keyboard and mouse. They can operate this virtual control desk in front of a computer monitor or a projection screen through spoken commands. The automatic speech recognition interface developed is based on a well-known signal processing technique named cepstral analysis, and on artificial neural networks. The speech recognition interface is described, along with its integration with the virtual control desk, and results are presented. (author)

Man-system interface based on automatic speech recognition: integration to a virtual control desk

International Nuclear Information System (INIS)

Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A.; Pereira, Claudio M.N.A.; Aghina, Mauricio Alves C.; Nomiya, Diogo V.

2009-01-01

This work reports the implementation of a man-system interface based on automatic speech recognition, and its integration to a virtual nuclear power plant control desk. The later is aimed to reproduce a real control desk using virtual reality technology, for operator training and ergonomic evaluation purpose. An automatic speech recognition system was developed to serve as a new interface with users, substituting computer keyboard and mouse. They can operate this virtual control desk in front of a computer monitor or a projection screen through spoken commands. The automatic speech recognition interface developed is based on a well-known signal processing technique named cepstral analysis, and on artificial neural networks. The speech recognition interface is described, along with its integration with the virtual control desk, and results are presented. (author)

Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

Energy Technology Data Exchange (ETDEWEB)

Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

1999-06-01

The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

Older Adults Perceptions of Technology and Barriers to Interacting with Tablet Computers: A Focus Group Study.

Science.gov (United States)

Vaportzis, Eleftheria; Clausen, Maria Giatsi; Gow, Alan J

2017-10-04

New technologies provide opportunities for the delivery of broad, flexible interventions with older adults. Focus groups were conducted to: (1) understand older adults' familiarity with, and barriers to, interacting with new technologies and tablets; and (2) utilize user-engagement in refining an intervention protocol. Eighteen older adults (65-76 years old; 83.3% female) who were novice tablet users participated in discussions about their perceptions of and barriers to interacting with tablets. We conducted three separate focus groups and used a generic qualitative design applying thematic analysis to analyse the data. The focus groups explored attitudes toward tablets and technology in general. We also explored the perceived advantages and disadvantages of using tablets, familiarity with, and barriers to interacting with tablets. In two of the focus groups, participants had previous computing experience (e.g., desktop), while in the other, participants had no previous computing experience. None of the participants had any previous experience with tablet computers. The themes that emerged were related to barriers (i.e., lack of instructions and guidance, lack of knowledge and confidence, health-related barriers, cost); disadvantages and concerns (i.e., too much and too complex technology, feelings of inadequacy, and comparison with younger generations, lack of social interaction and communication, negative features of tablets); advantages (i.e., positive features of tablets, accessing information, willingness to adopt technology); and skepticism about using tablets and technology in general. After brief exposure to tablets, participants emphasized the likelihood of using a tablet in the future. Our findings suggest that most of our participants were eager to adopt new technology and willing to learn using a tablet. However, they voiced apprehension about lack of, or lack of clarity in, instructions and support. Understanding older adults' perceptions of technology

76 FR 28499 - Data Fortress Systems Group Ltd., Digital Youth Network Corp., Fantom Technologies, Inc., and KIK...

Science.gov (United States)

2011-05-17

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Data Fortress Systems Group Ltd., Digital Youth Network Corp., Fantom Technologies, Inc., and KIK Technology International, Inc., Order of... of current and accurate information concerning the securities of Data Fortress Systems Group Ltd...

Automatic data-processing equipment of moon mark of nail for verifying some experiential theory of Traditional Chinese Medicine.

Science.gov (United States)

Niu, Renjie; Fu, Chenyu; Xu, Zhiyong; Huang, Jianyuan

2016-04-29

Doctors who practice Traditional Chinese Medicine (TCM) diagnose using four methods - inspection, auscultation and olfaction, interrogation, and pulse feeling/palpation. The shape and shape changes of the moon marks on the nails are an important indication when judging the patient's health. There are a series of classical and experimental theories about moon marks in TCM, which does not have support from statistical data. To verify some experiential theories on moon mark in TCM by automatic data-processing equipment. This paper proposes the equipment that utilizes image processing technology to collect moon mark data of different target groups conveniently and quickly, building a database that combines this information with that gathered from the health and mental status questionnaire in each test. This equipment has a simple design, a low cost, and an optimized algorithm. The practice has been proven to quickly complete automatic acquisition and preservation of key data about moon marks. In the future, some conclusions will likely be obtained from these data; some changes of moon marks related to a special pathological change will be established with statistical methods.

Automatic indexing, compiling and classification

International Nuclear Information System (INIS)

Andreewsky, Alexandre; Fluhr, Christian.

1975-06-01

A review of the principles of automatic indexing, is followed by a comparison and summing-up of work by the authors and by a Soviet staff from the Moscou INFORM-ELECTRO Institute. The mathematical and linguistic problems of the automatic building of thesaurus and automatic classification are examined [fr

Automatic video shot boundary detection using k-means clustering and improved adaptive dual threshold comparison

Science.gov (United States)

Sa, Qila; Wang, Zhihui

2018-03-01

At present, content-based video retrieval (CBVR) is the most mainstream video retrieval method, using the video features of its own to perform automatic identification and retrieval. This method involves a key technology, i.e. shot segmentation. In this paper, the method of automatic video shot boundary detection with K-means clustering and improved adaptive dual threshold comparison is proposed. First, extract the visual features of every frame and divide them into two categories using K-means clustering algorithm, namely, one with significant change and one with no significant change. Then, as to the classification results, utilize the improved adaptive dual threshold comparison method to determine the abrupt as well as gradual shot boundaries.Finally, achieve automatic video shot boundary detection system.

Simplified automatic on-line document searching

International Nuclear Information System (INIS)

Ebinuma, Yukio

1983-01-01

The author proposed searching method for users who need not-comprehensive retrieval. That is to provide flexible number of related documents for the users automatically. A group of technical terms are used as search terms to express an inquiry. Logical sums of the terms in the ascending order of frequency of the usage are prepared sequentially and automatically, and then the search formulas, qsub(m) and qsub(m-1) which meet certain threshold values are selected automatically also. Users justify precision of the search output up to 20 items retrieved by the formula qsub(m). If a user wishes more than 30% of recall ratio, the serach result should be output by qsub(m), and if he wishes less than 30% of it, it should be output by qsub(m-1). The search by this method using one year volume of INIS Database (76,600 items) and five inquiries resulted in 32% of recall ratio and 36% of precision ratio on the average in the case of qsub(m). The connecting time of a terminal was within 15 minutes per an inquiry. It showed more efficiency than that of an inexperienced searcher. The method can be applied to on-line searching system for database in which natural language only or natural language and controlled vocabulary are used. (author)

Preservation of memory-based automaticity in reading for older adults.

Science.gov (United States)

Rawson, Katherine A; Touron, Dayna R

2015-12-01

Concerning age-related effects on cognitive skill acquisition, the modal finding is that older adults do not benefit from practice to the same extent as younger adults in tasks that afford a shift from slower algorithmic processing to faster memory-based processing. In contrast, Rawson and Touron (2009) demonstrated a relatively rapid shift to memory-based processing in the context of a reading task. The current research extended beyond this initial study to provide more definitive evidence for relative preservation of memory-based automaticity in reading tasks for older adults. Younger and older adults read short stories containing unfamiliar noun phrases (e.g., skunk mud) followed by disambiguating information indicating the combination's meaning (either the normatively dominant meaning or an alternative subordinate meaning). Stories were repeated across practice blocks, and then the noun phrases were presented in novel sentence frames in a transfer task. Both age groups shifted from computation to retrieval after relatively few practice trials (as evidenced by convergence of reading times for dominant and subordinate items). Most important, both age groups showed strong evidence for memory-based processing of the noun phrases in the transfer task. In contrast, older adults showed minimal shifting to retrieval in an alphabet arithmetic task, indicating that the preservation of memory-based automaticity in reading was task-specific. Discussion focuses on important implications for theories of memory-based automaticity in general and for specific theoretical accounts of age effects on memory-based automaticity, as well as fruitful directions for future research. (c) 2015 APA, all rights reserved).

Fast automatic analysis of antenatal dexamethasone on micro-seizure activity in the EEG

International Nuclear Information System (INIS)

Rastin, S.J.; Unsworth, C.P.; Bennet, L.

2010-01-01

Full text: In this work wc develop an automatic scheme for studying the effect of the antenatal Dexamethasone on the EEG activity. To do so an FFT (Fast Fourier Transform) based detector was designed and applied to the EEG recordings obtained from two groups of fetal sheep. Both groups received two injections with a time delay of 24 h between them. However the applied medicine was different for each group (Dex and saline). The detector developed was used to automatically identify and classify micro-seizures that occurred in the frequency bands corresponding to the EEG transients known as slow waves (2.5 14 Hz). For each second of the data recordings the spectrum was computed and the rise of the energy in each predefined frequency band then counted when the energy level exceeded a predefined corresponding threshold level (Where the threshold level was obtained from the long term average of the spectral points at each band). Our results demonstrate that it was possible to automatically count the micro-seizures for the three different bands in a time effective manner. It was found that the number of transients did not strongly depend on the nature of the injected medicine which was consistent with the results manually obtained by an EEG expert. Tn conclusion, the automatic detection scheme presented here would allow for rapid micro-seizure event identification of hours of highly sampled EEG data thus providing a valuable time-saving device.

Developmental Dyscalculia and Automatic Magnitudes Processing: Investigating Interference Effects between Area and Perimeter

Directory of Open Access Journals (Sweden)

Hili Eidlin-Levy

2017-12-01

Full Text Available The relationship between numbers and other magnitudes has been extensively investigated in the scientific literature. Here, the objectives were to examine whether two continuous magnitudes, area and perimeter, are automatically processed and whether adults with developmental dyscalculia (DD are deficient in their ability to automatically process one or both of these magnitudes. Fifty-seven students (30 with DD and 27 with typical development performed a novel Stroop-like task requiring estimation of one aspect (area or perimeter while ignoring the other. In order to track possible changes in automaticity due to practice, we measured performance after initial and continuous exposure to stimuli. Similar to previous findings, current results show a significant group × congruency interaction, evident beyond exposure level or magnitude type. That is, the DD group systematically showed larger Stroop effects. However, analysis of each exposure period showed that during initial exposure to stimuli the DD group showed larger Stroop effects in the perimeter and not in the area task. In contrast, during continuous exposure to stimuli no triple interaction was evident. It is concluded that both magnitudes are automatically processed. Nevertheless, individuals with DD are deficient in inhibiting irrelevant magnitude information in general and, specifically, struggle to inhibit salient area information after initial exposure to a perimeter comparison task. Accordingly, the findings support the assumption that DD involves a deficiency in multiple cognitive components, which include domain-specific and domain-general cognitive functions.

Developmental Dyscalculia and Automatic Magnitudes Processing: Investigating Interference Effects between Area and Perimeter.

Science.gov (United States)

Eidlin-Levy, Hili; Rubinsten, Orly

2017-01-01

The relationship between numbers and other magnitudes has been extensively investigated in the scientific literature. Here, the objectives were to examine whether two continuous magnitudes, area and perimeter, are automatically processed and whether adults with developmental dyscalculia (DD) are deficient in their ability to automatically process one or both of these magnitudes. Fifty-seven students (30 with DD and 27 with typical development) performed a novel Stroop-like task requiring estimation of one aspect (area or perimeter) while ignoring the other. In order to track possible changes in automaticity due to practice, we measured performance after initial and continuous exposure to stimuli. Similar to previous findings, current results show a significant group × congruency interaction, evident beyond exposure level or magnitude type. That is, the DD group systematically showed larger Stroop effects. However, analysis of each exposure period showed that during initial exposure to stimuli the DD group showed larger Stroop effects in the perimeter and not in the area task. In contrast, during continuous exposure to stimuli no triple interaction was evident. It is concluded that both magnitudes are automatically processed. Nevertheless, individuals with DD are deficient in inhibiting irrelevant magnitude information in general and, specifically, struggle to inhibit salient area information after initial exposure to a perimeter comparison task. Accordingly, the findings support the assumption that DD involves a deficiency in multiple cognitive components, which include domain-specific and domain-general cognitive functions.

The development of advanced instrumentation and control technology -The development of basic technology for instrumentation and control-

Energy Technology Data Exchange (ETDEWEB)

Ham, Chang Sik; Kwon, Kee Choon; Park, Jae Chang; Kim, Jung Taek; Jung, Chul Hwan; Lee, Dong Yung; Kim, Chang Hoi; Hwang, In Koo; Kim, Jung Soo; Nah, Nan Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-07-01

In this report automatic startup technology and dynamic alarm processing technology are developed. We designed an automatic control system had four modes and six break points. The four modes are heating mode I, heating mode II, heating mode III and critical mode. The six break points are RHR isolation and pressurizer bubble generation, P-6, critical conformation and another three break points for the start point of each mode from heating mode II to critical mode. We defined control variables and components at each mode and developed control algorithms. The conceptual design for automatic startup system configuration and interface with test facility was developed. These results will be used for detail design and software implementation in the project of next year. For development of dynamic alarm processing technology, necessary techniques were selected according to the survey on current development activities and the analysis on design documents. Alarm operating procedures were studied for obtaining casual relationships among alarms and part of a preliminary prototype was implemented in this first year using the results of the analysis including various techniques studied during the survey and analysis stage. 70 figs, 7 tabs, 77 refs. (Author).

Automatic recloser circuit breaker integrated with GSM technology for power system notification

Science.gov (United States)

Lada, M. Y.; Khiar, M. S. A.; Ghani, S. A.; Nawawi, M. R. M.; Rahim, N. H.; Sinar, L. O. M.

2015-05-01

Lightning is one type of transient faults that usually cause the circuit breaker in the distribution board trip due to overload current detection. The instant tripping condition in the circuit breakers clears the fault in the system. Unfortunately most circuit breakers system is manually operated. The power line will be effectively re-energized after the clearing fault process is finished. Auto-reclose circuit is used on the transmission line to carry out the duty of supplying quality electrical power to customers. In this project, an automatic reclose circuit breaker for low voltage usage is designed. The product description is the Auto Reclose Circuit Breaker (ARCB) will trip if the current sensor detects high current which exceeds the rated current for the miniature circuit breaker (MCB) used. Then the fault condition will be cleared automatically and return the power line to normal condition. The Global System for Mobile Communication (GSM) system will send SMS to the person in charge if the tripping occurs. If the over current occurs in three times, the system will fully trip (open circuit) and at the same time will send an SMS to the person in charge. In this project a 1 A is set as the rated current and any current exceeding a 1 A will cause the system to trip or interrupted. This system also provides an additional notification for user such as the emergency light and warning system.

Report on achievements of research and development of an automatic sewing system in fiscal 1985. System management and control technology; 1985 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-01

This paper describes the system management and control technology, extracted from the achievement report for fiscal 1985 on developing an automatic sewing system. The comprehensive system management has verified algorithms for the optimal process formation and load balancing based on the industry's latest market and production plan trends, and obtained good results. Furthermore, structuring, discussions and proposals were made on an interface system of an optimal process controlling computer with an automatic device controlling micro computer. The inspection and failure diagnosis have set a quality standard for intermediate products in the sewing lines, and verified that its automation is possible by using an image processing technology that identifies dimensional inspection and colors. In the research of printing control information, calculations were performed on the information amount, printing locations, expression method and printing speed, narrowing down to parts ID and location information as the required printing information. Thus,items of basic information for media, media printing and printing device design were put into order. The information recognizing technology has picked up image recognition applying locations in a sewing factory and problems therein, and performed evaluation experiments on specific pattern matching and processing position recognition to have obtained the prospect of application of the automation. (NEDO)

Report on achievements of research and development of an automatic sewing system in fiscal 1985. System management and control technology; 1985 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-01

This paper describes the system management and control technology, extracted from the achievement report for fiscal 1985 on developing an automatic sewing system. The comprehensive system management has verified algorithms for the optimal process formation and load balancing based on the industry's latest market and production plan trends, and obtained good results. Furthermore, structuring, discussions and proposals were made on an interface system of an optimal process controlling computer with an automatic device controlling micro computer. The inspection and failure diagnosis have set a quality standard for intermediate products in the sewing lines, and verified that its automation is possible by using an image processing technology that identifies dimensional inspection and colors. In the research of printing control information, calculations were performed on the information amount, printing locations, expression method and printing speed, narrowing down to parts ID and location information as the required printing information. Thus,items of basic information for media, media printing and printing device design were put into order. The information recognizing technology has picked up image recognition applying locations in a sewing factory and problems therein, and performed evaluation experiments on specific pattern matching and processing position recognition to have obtained the prospect of application of the automation. (NEDO)

Individual Differences in Automatic Emotion Regulation Affect the Asymmetry of the LPP Component

OpenAIRE

Zhang, Jing; Zhou, Renlai

2014-01-01

The main goal of this study was to investigate how automatic emotion regulation altered the hemispheric asymmetry of ERPs elicited by emotion processing. We examined the effect of individual differences in automatic emotion regulation on the late positive potential (LPP) when participants were viewing blocks of positive high arousal, positive low arousal, negative high arousal and negative low arousal pictures from International affect picture system (IAPS). Two participant groups were catego...

Newborn hearing screening with transient evoked otoacoustic emissions and automatic auditory brainstem response

OpenAIRE

Renata Mota Mamede de Carvallo; Carla Gentile Matas; Isabela de Souza Jardim

2008-01-01

Objective: The aim of the present investigation was to check Transient Evoked Otoacoustic Emissions and Automatic Auditory Brainstem Response tests applied together in regular nurseries and Newborn Intensive Care Units (NICU), as well as to describe and compare the results obtained in both groups. Methods: We tested 150 newborns from regular nurseries and 70 from NICU. Rresults: The newborn hearing screening results using Transient Evoked Otoacoustic Emissions and Automatic Auditory Brainstem...

On the automaticity of response inhibition in individuals with alcoholism.

Science.gov (United States)

Noël, Xavier; Brevers, Damien; Hanak, Catherine; Kornreich, Charles; Verbanck, Paul; Verbruggen, Frederick

2016-06-01

Response inhibition is usually considered a hallmark of executive control. However, recent work indicates that stop performance can become associatively mediated ('automatic') over practice. This study investigated automatic response inhibition in sober and recently detoxified individuals with alcoholism.. We administered to forty recently detoxified alcoholics and forty healthy participants a modified stop-signal task that consisted of a training phase in which a subset of the stimuli was consistently associated with stopping or going, and a test phase in which this mapping was reversed. In the training phase, stop performance improved for the consistent stop stimuli, compared with control stimuli that were not associated with going or stopping. In the test phase, go performance tended to be impaired for old stop stimuli. Combined, these findings support the automatic inhibition hypothesis. Importantly, performance was similar in both groups, which indicates that automatic inhibitory control develops normally in individuals with alcoholism.. This finding is specific to individuals with alcoholism without other psychiatric disorders, which is rather atypical and prevents generalization. Personalized stimuli with a stronger affective content should be used in future studies. These results advance our understanding of behavioral inhibition in individuals with alcoholism. Furthermore, intact automatic inhibitory control may be an important element of successful cognitive remediation of addictive behaviors.. Copyright © 2016 Elsevier Ltd. All rights reserved.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

Science.gov (United States)

1999-01-01

Center Director Roy Bridges (standing, center) poses with members of the Disability Awareness and Action Working Group (DAAWG), which is holding the 1999 Technology Fair Oct. 20-21 at Kennedy Space Center. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

Sustainability evaluation of automatic and conventional milking systems on organic dairy farms in Denmark

NARCIS (Netherlands)

Oudshoorn, F.W.; Kristensen, T.; Zijpp, van der A.J.; Boer, de I.J.M.

2012-01-01

Organic dairy farmers in Denmark currently are implementing automatic milking systems (AMS) to save labour costs. As organic agriculture aims at sustainable production, the introduction of a new technology such as AMS should be evaluated regarding its economic viability, environmental impact, and

A rapid automatic analyzer and its methodology for effective bentonite content based on image recognition technology

Directory of Open Access Journals (Sweden)

Wei Long

2016-09-01

Full Text Available Fast and accurate determination of effective bentonite content in used clay bonded sand is very important for selecting the correct mixing ratio and mixing process to obtain high-performance molding sand. Currently, the effective bentonite content is determined by testing the ethylene blue absorbed in used clay bonded sand, which is usually a manual operation with some disadvantages including complicated process, long testing time and low accuracy. A rapid automatic analyzer of the effective bentonite content in used clay bonded sand was developed based on image recognition technology. The instrument consists of auto stirring, auto liquid removal, auto titration, step-rotation and image acquisition components, and processor. The principle of the image recognition method is first to decompose the color images into three-channel gray images based on the photosensitive degree difference of the light blue and dark blue in the three channels of red, green and blue, then to make the gray values subtraction calculation and gray level transformation of the gray images, and finally, to extract the outer circle light blue halo and the inner circle blue spot and calculate their area ratio. The titration process can be judged to reach the end-point while the area ratio is higher than the setting value.

Contribution to automatic image recognition. Application to analysis of plain scenes of overlapping parts in robot technology

International Nuclear Information System (INIS)

Tan, Shengbiao

1987-01-01

A method for object modeling and overlapped object automatic recognition is presented. Our work is composed of three essential parts: image processing, object modeling, and evaluation of the implementation of the stated concepts. In the first part, we present a method of edge encoding which is based on a re-sampling of the data encoded according to Freeman, this method generates an isotropic, homogenous and very precise representation. The second part relates to object modeling. This important step makes much easier the recognition work. The new method proposed characterizes a model with two groups of information: the description group containing the primitives, the discrimination group containing data packs, called 'transition vectors'. Based on this original method of information organization, a 'relative learning' is able to select, to ignore and to update the information concerning the objects already learned, according to the new information to be included into the data base. The recognition is a two-pass process: the first pass determines very efficiently the presence of objects by making use of each object's particularities, and this hypothesis is either confirmed or rejected by the following fine verification pass. The last part describes in detail the experimentation results. We demonstrate the robustness of the algorithms with images in both poor lighting and overlapping objects conditions. The system, named SOFIA, has been installed into an industrial vision system series and works in real time. (author) [fr

Assessing the impact of automated coding & grouping technology at St Vincent's Hospital, Sydney.

Science.gov (United States)

Howes, M H

1993-12-01

In 1992 the Hospital recognised that the existing casemix data reporting systems were too removed from individual patients to have any meaning for clinicians, analysis of the data was difficult and the processes involved in the DRG assignment were subject to considerable error. Consequently, the Hospital approved the purchase of technology that would facilitate the coding and grouping process. The impact of automated coding and grouping technology is assessed by three methods. Firstly, by looking at by-product information systems, secondly, through subjective responses by coders to a satisfaction questionnaire and, thirdly, by objectively measuring hospital activity and identified coding elements before and after implementation of the 3M technology. It was concluded that while the 3M Coding and Grouping software should not be viewed as a panacea to all coding and documentation ills, objective evidence and subjective comment from the coders indicated an improvement in data quality and more accurate DRG assignment. Development of an in-house casemix information system and a feedback mechanism between coder and clinician had been effected. The product had been used as a training tool for coders and had also proven to be a useful auditing tool. Finally, linkage with other systems and the generation of timely reports had been realised.

Fixed automated spray technology.

Science.gov (United States)

2011-04-19

This research project evaluated the construction and performance of Boschungs Fixed Automated : Spray Technology (FAST) system. The FAST system automatically sprays de-icing material on : the bridge when icing conditions are about to occur. The FA...

Group size and social conflict in complex societies.

Science.gov (United States)

Shen, Sheng-Feng; Akçay, Erol; Rubenstein, Dustin R

2014-02-01

Conflicts of interest over resources or reproduction among individuals in a social group have long been considered to result in automatic and universal costs to group living. However, exploring how social conflict varies with group size has produced mixed empirical results. Here we develop a model that generates alternative predictions for how social conflict should vary with group size depending on the type of benefits gained from being in a social group. We show that a positive relationship between social conflict and group size is favored when groups form primarily for the benefits of sociality but not when groups form mainly for accessing group-defended resources. Thus, increased social conflict in animal societies should not be viewed as an automatic cost of larger social groups. Instead, studying the relationship between social conflict and the types of grouping benefits will be crucial for understanding the evolution of complex societies.

Automatic sets and Delone sets

International Nuclear Information System (INIS)

Barbe, A; Haeseler, F von

2004-01-01

Automatic sets D part of Z m are characterized by having a finite number of decimations. They are equivalently generated by fixed points of certain substitution systems, or by certain finite automata. As examples, two-dimensional versions of the Thue-Morse, Baum-Sweet, Rudin-Shapiro and paperfolding sequences are presented. We give a necessary and sufficient condition for an automatic set D part of Z m to be a Delone set in R m . The result is then extended to automatic sets that are defined as fixed points of certain substitutions. The morphology of automatic sets is discussed by means of examples

Examining Educational Climate Change Technology: How Group Inquiry Work with Realistic Scientific Technology Alters Classroom Learning

Science.gov (United States)

Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

2018-04-01

This study with 79 students in Montreal, Quebec, compared the educational use of a National Aeronautics and Space Administration (NASA) global climate model (GCM) to climate education technologies developed for classroom use that included simpler interfaces and processes. The goal was to show how differing climate education technologies succeed and fail at getting students to evolve in their understanding of anthropogenic global climate change (AGCC). Many available climate education technologies aim to convey key AGCC concepts or Earth systems processes; the educational GCM used here aims to teach students the methods and processes of global climate modeling. We hypothesized that challenges to learning about AGCC make authentic technology-enabled inquiry important in developing accurate understandings of not just the issue but how scientists research it. The goal was to determine if student learning trajectories differed between the comparison and treatment groups based on whether each climate education technology allowed authentic scientific research. We trace learning trajectories using pre/post exams, practice quizzes, and written student reflections. To examine the reasons for differing learning trajectories, we discuss student pre/post questionnaires, student exit interviews, and 535 min of recorded classroom video. Students who worked with a GCM demonstrated learning trajectories with larger gains, higher levels of engagement, and a better idea of how climate scientists conduct research. Students who worked with simpler climate education technologies scored lower in the course because of lower levels of engagement with inquiry processes that were perceived to not actually resemble the work of climate scientists.

Arraycount, an algorithm for automatic cell counting in microwell arrays

OpenAIRE

Kachouie, Nezamoddin N.; Kang, Lifeng; Khademhosseini, Ali

2009-01-01

Microscale technologies have emerged as a powerful tool for studying and manipulating biological systems and miniaturizing experiments. However, the lack of software complementing these techniques has made it difficult to apply them for many high-throughput experiments. This work establishes Arraycount, an approach to automatically count cells in microwell arrays. The procedure consists of fluorescent microscope imaging of cells that are seeded in microwells of a microarray system and then an...

Supporting intra-group social metacognitive activities with technology: A grammar learning game

NARCIS (Netherlands)

Molenaar, I.; Horvers, A.; Desain, P.W.M.

2017-01-01

This study investigates the effects of a technology enhanced collaborative grammar learning activity on students sentence parsing and formulation. These types of collaborative learning activities for grammar education are expected to support more effective learning. Yet, effective intra-group social

Automatic Volumetry of the Cerebrospinal Fluid Space in Idiopathic Normal Pressure Hydrocephalus

Directory of Open Access Journals (Sweden)

Kazunari Ishii

2013-12-01

Full Text Available Objectives: To measure the cerebrospinal fluid (CSF space volume in idiopathic normal pressure hydrocephalus (INPH, we developed a software that allows us to automatically measure the regional CSF space and compared the volumes of the ventricle systems (VS, Sylvian fissures (SF and sulci at high convexity and midline (SHM among INPH patients, Alzheimer's disease (AD patients and healthy volunteers (HVs. Methods: Fifteen INPH patients, 15 AD patients and 15 HVs were retrospectively selected for this study. 3D-T1 MR images were obtained. We improved upon an automatic gray matter volume system to measure CSF spaces, adopting new regions for the template of INPH-characteristic CSF spaces and measured them. The VS, SF and SHM volumes were calculated relative to the intracranial volume. Results: The relative SHM volume of the INPH group (0.0237 ± 0.0064 was the smallest among the 3 groups (AD: 0.0477 ± 0.0109, HV: 0.0542 ± 0.0045. The VS (0.0499 ± 0.0135 and SF (0.0187 ± 0.0037 volumes of the INPH group were significantly larger than those of the AD (VS: 0.0311 ± 0.0075, SF: 0.0146 ± 0.0026 and HV groups (VS: 0.0167 ± 0.0065, SF: 0.0111 ± 0.017. Conclusion: Automatic volume measurement can be used to delineate the characteristic changes in CSF space in patients with INPH and is useful in the diagnosis of INPH.

Advisory group meeting on new trends and developments in radiation technology

International Nuclear Information System (INIS)

1993-02-01

High energy, ionizing radiation (gamma and electron beams) has been used by industry for many years and for different applications. Well established applications include: industrial sterilization of health care products (medical products and medicinals), radiation modification of plastics (crosslinking of wire and cable insulation, heat shrinkable materials, etc.) and radiation curing of adhesives and coatings on different substrates. The main purpose of the Advisory Group Meeting was to provide a forum for an exchange of information about the new developments in radiation technology, to review the status of these developments and to discuss potential for commercial applications. A further objective was to discuss the role of the International Atomic Energy Agency in promoting new technologies, research and transfer of technology to developing countries. The meeting was expected to prepare recommendations to the Agency for future activities and programmes in this field. Refs, figs and tabs

Automatisms: bridging clinical neurology with criminal law.

Science.gov (United States)

Rolnick, Joshua; Parvizi, Josef

2011-03-01

The law, like neurology, grapples with the relationship between disease states and behavior. Sometimes, the two disciplines share the same terminology, such as automatism. In law, the "automatism defense" is a claim that action was involuntary or performed while unconscious. Someone charged with a serious crime can acknowledge committing the act and yet may go free if, relying on the expert testimony of clinicians, the court determines that the act of crime was committed in a state of automatism. In this review, we explore the relationship between the use of automatism in the legal and clinical literature. We close by addressing several issues raised by the automatism defense: semantic ambiguity surrounding the term automatism, the presence or absence of consciousness during automatisms, and the methodological obstacles that have hindered the study of cognition during automatisms. Copyright © 2010 Elsevier Inc. All rights reserved.

Technologies That Assist in Online Group Work: A Comparison of Synchronous and Asynchronous Computer Mediated Communication Technologies on Students' Learning and Community

Science.gov (United States)

Rockinson-Szapkiw, Amanda; Wendt, Jillian

2015-01-01

While the benefits of online group work completed using asynchronous CMC technology is documented, researchers have identified a number of challenges that result in ineffective and unsuccessful online group work. Fewer channels of communication and lack of immediacy when compared to face-to-face group work are a few of the noted limitations. Thus,…

Automatic Speech Recognition Systems for the Evaluation of Voice and Speech Disorders in Head and Neck Cancer

Directory of Open Access Journals (Sweden)

Andreas Maier

2010-01-01

Full Text Available In patients suffering from head and neck cancer, speech intelligibility is often restricted. For assessment and outcome measurements, automatic speech recognition systems have previously been shown to be appropriate for objective and quick evaluation of intelligibility. In this study we investigate the applicability of the method to speech disorders caused by head and neck cancer. Intelligibility was quantified by speech recognition on recordings of a standard text read by 41 German laryngectomized patients with cancer of the larynx or hypopharynx and 49 German patients who had suffered from oral cancer. The speech recognition provides the percentage of correctly recognized words of a sequence, that is, the word recognition rate. Automatic evaluation was compared to perceptual ratings by a panel of experts and to an age-matched control group. Both patient groups showed significantly lower word recognition rates than the control group. Automatic speech recognition yielded word recognition rates which complied with experts' evaluation of intelligibility on a significant level. Automatic speech recognition serves as a good means with low effort to objectify and quantify the most important aspect of pathologic speech—the intelligibility. The system was successfully applied to voice and speech disorders.

Integrated Automatic Test System for Airborne Optoelectronic Pods

International Nuclear Information System (INIS)

Zhang, Z M; Ding, M J; Wang, L

2006-01-01

Based on the introduction of the construction and basic principle of the airborne optoelectronic pod, in accordance with the performance standards of the pod, the total solution scheme of the automatic test system used for testing the combination property is proposed in this paper. The main structure, hardware and software design of the system based on the virtual instruments technology are also discussed in detail. The result of the true run proves the practicality, efficiency, high accuracy and other characteristics of the computer aided testing system based on virtual instruments

Automatic EEG spike detection.

Science.gov (United States)

Harner, Richard

2009-10-01

Since the 1970s advances in science and technology during each succeeding decade have renewed the expectation of efficient, reliable automatic epileptiform spike detection (AESD). But even when reinforced with better, faster tools, clinically reliable unsupervised spike detection remains beyond our reach. Expert-selected spike parameters were the first and still most widely used for AESD. Thresholds for amplitude, duration, sharpness, rise-time, fall-time, after-coming slow waves, background frequency, and more have been used. It is still unclear which of these wave parameters are essential, beyond peak-peak amplitude and duration. Wavelet parameters are very appropriate to AESD but need to be combined with other parameters to achieve desired levels of spike detection efficiency. Artificial Neural Network (ANN) and expert-system methods may have reached peak efficiency. Support Vector Machine (SVM) technology focuses on outliers rather than centroids of spike and nonspike data clusters and should improve AESD efficiency. An exemplary spike/nonspike database is suggested as a tool for assessing parameters and methods for AESD and is available in CSV or Matlab formats from the author at brainvue@gmail.com. Exploratory Data Analysis (EDA) is presented as a graphic method for finding better spike parameters and for the step-wise evaluation of the spike detection process.

An Automatic Segmentation Method Combining an Active Contour Model and a Classification Technique for Detecting Polycomb-group Proteinsin High-Throughput Microscopy Images.

Science.gov (United States)

Gregoretti, Francesco; Cesarini, Elisa; Lanzuolo, Chiara; Oliva, Gennaro; Antonelli, Laura

2016-01-01

The large amount of data generated in biological experiments that rely on advanced microscopy can be handled only with automated image analysis. Most analyses require a reliable cell image segmentation eventually capable of detecting subcellular structures.We present an automatic segmentation method to detect Polycomb group (PcG) proteins areas isolated from nuclei regions in high-resolution fluorescent cell image stacks. It combines two segmentation algorithms that use an active contour model and a classification technique serving as a tool to better understand the subcellular three-dimensional distribution of PcG proteins in live cell image sequences. We obtained accurate results throughout several cell image datasets, coming from different cell types and corresponding to different fluorescent labels, without requiring elaborate adjustments to each dataset.

Automatic Matching of Large Scale Images and Terrestrial LIDAR Based on App Synergy of Mobile Phone

Science.gov (United States)

Xia, G.; Hu, C.

2018-04-01

The digitalization of Cultural Heritage based on ground laser scanning technology has been widely applied. High-precision scanning and high-resolution photography of cultural relics are the main methods of data acquisition. The reconstruction with the complete point cloud and high-resolution image requires the matching of image and point cloud, the acquisition of the homonym feature points, the data registration, etc. However, the one-to-one correspondence between image and corresponding point cloud depends on inefficient manual search. The effective classify and management of a large number of image and the matching of large image and corresponding point cloud will be the focus of the research. In this paper, we propose automatic matching of large scale images and terrestrial LiDAR based on APP synergy of mobile phone. Firstly, we develop an APP based on Android, take pictures and record related information of classification. Secondly, all the images are automatically grouped with the recorded information. Thirdly, the matching algorithm is used to match the global and local image. According to the one-to-one correspondence between the global image and the point cloud reflection intensity image, the automatic matching of the image and its corresponding laser radar point cloud is realized. Finally, the mapping relationship between global image, local image and intensity image is established according to homonym feature point. So we can establish the data structure of the global image, the local image in the global image, the local image corresponding point cloud, and carry on the visualization management and query of image.

Adherence to Technology-Mediated Insomnia Treatment: A Meta-Analysis, Interviews, and Focus Groups.

Science.gov (United States)

Horsch, Corine; Lancee, Jaap; Beun, Robbert Jan; Neerincx, Mark A; Brinkman, Willem-Paul

2015-09-04

Several technologies have been proposed to support the reduction of insomnia complaints. A user-centered assessment of these technologies could provide insight into underlying factors related to treatment adherence. Gaining insight into adherence to technology-mediated insomnia treatment as a solid base for improving those adherence rates by applying adherence-enhancing strategies. Adherence to technology-mediated sleep products was studied in three ways. First, a meta-analysis was performed to investigate adherence rates in technology-mediated insomnia therapy. Several databases were queried for technology-mediated insomnia treatments. After inclusion and exclusion steps, data from 18 studies were retrieved and aggregated to find an average adherence rate. Next, 15 semistructured interviews about sleep-support technologies were conducted to investigate perceived adherence. Lastly, several scenarios were written about the usage of a virtual sleep coach that could support adherence rates. The scenarios were discussed in six different focus groups consisting of potential users (n=15), sleep experts (n=7), and coaches (n=9). From the meta-analysis, average treatment adherence appeared to be approximately 52% (95% CI 43%-61%) for technology-mediated insomnia treatments. This means that, on average, half of the treatment exercises were not executed, suggesting there is a substantial need for adherence and room for improvement in this area. However, the users in the interviews believed they adhered quite well to their sleep products. Users mentioned relying on personal commitment (ie, willpower) for therapy adherence. Participants of the focus groups reconfirmed their belief in the effectiveness of personal commitment, which they regarded as more effective than adherence-enhancing strategies. Although adherence rates for insomnia interventions indicate extensive room for improvement, users might not consider adherence to be a problem; they believe willpower to be an

MRI in assessing children with learning disability, focal findings, and reduced automaticity.

Science.gov (United States)

Urion, David K; Huff, Hanalise V; Carullo, Maria Paulina

2015-08-18

In children with clinically diagnosed learning disabilities with focal findings on neurologic or neuropsychological evaluations, there is a hypothesized association between disorders in automaticity and focal structural abnormalities observed in brain MRIs. We undertook a retrospective analysis of cases referred to a tertiary-hospital-based learning disabilities program. Individuals were coded as having a focal deficit if either neurologic or neuropsychological evaluation demonstrated focal dysfunction. Those with abnormal MRI findings were categorized based on findings. Children with abnormalities from each of these categories were compared in terms of deficits in automaticity, as measured by the tasks of Rapid Automatized Naming, Rapid Alternating Stimulus Naming, or the timed motor performance battery from the Physical and Neurological Examination for Soft Signs. Data were compared in children with and without disorders of automaticity regarding type of brain structure abnormality. Of the 1,587 children evaluated, 127 had a focal deficit. Eighty-seven had a brain MRI (52 on 1.5-tesla machines and 35 on 3.0-tesla machines). Forty of these images were found to be abnormal. These children were compared with a clinic sample of 150 patients with learning disabilities and no focal findings on examination, who also had undergone MRI. Only 5 of the latter group had abnormalities on MRI. Reduced verbal automaticity was associated with cerebellar abnormalities, whereas reduced automaticity on motor or motor and verbal tasks was associated with white matter abnormalities. Reduced automaticity of retrieval and slow timed motor performance appear to be highly associated with MRI findings. © 2015 American Academy of Neurology.

Automatic mimicry reactions as related to differences in emotional empathy.

Science.gov (United States)

Sonnby-Borgström, Marianne

2002-12-01

The hypotheses of this investigation were derived by conceiving of automatic mimicking as a component of emotional empathy. Differences between subjects high and low in emotional empathy were investigated. The parameters compared were facial mimicry reactions, as represented by electromyographic (EMG) activity when subjects were exposed to pictures of angry or happy faces, and the degree of correspondence between subjects' facial EMG reactions and their self-reported feelings. The comparisons were made at different stimulus exposure times in order to elicit reactions at different levels of information processing. The high-empathy subjects were found to have a higher degree of mimicking behavior than the low-empathy subjects, a difference that emerged at short exposure times (17-40 ms) that represented automatic reactions. The low-empathy subjects tended already at short exposure times (17-40 ms) to show inverse zygomaticus muscle reactions, namely "smiling" when exposed to an angry face. The high-empathy group was characterized by a significantly higher correspondence between facial expressions and self-reported feelings. No differences were found between the high- and low-empathy subjects in their verbally reported feelings when presented a happy or an angry face. Thus, the differences between the groups in emotional empathy appeared to be related to differences in automatic somatic reactions to facial stimuli rather than to differences in their conscious interpretation of the emotional situation.

Automatic evaluation of practices in Moodle for Self Learning in Engineering

Directory of Open Access Journals (Sweden)

Carles Sanchez

2015-06-01

Full Text Available The first years in engineering degree courses are usually made of large groups with a low teacher-student ratio. Overcrowding in classrooms hinders continuous assessment much needed to promote independent learning. Therefore, there is a need to apply some kind of automatic evaluation to facilitate the correction of exercises outside the classroom. We introduce here a first experience using surveys in Moodle 2.0 in order to get an automatic evaluation of practices in our Database course. We report survey valuation of the autonomous learning tool and preliminary statistics assessing correlation to an improvement in the practice exam marks.

Improving Evaluation to Address the Unintended Consequences of Health Information Technology:. a Position Paper from the Working Group on Technology Assessment & Quality Development

NARCIS (Netherlands)

Magrabi, F.; Ammenwerth, E.; Hyppönen, H.; de Keizer, N.; Nykänen, P.; Rigby, M.; Scott, P.; Talmon, J.; Georgiou, A.

2016-01-01

With growing use of IT by healthcare professionals and patients, the opportunity for any unintended effects of technology to disrupt care health processes and outcomes is intensified. The objectives of this position paper by the IMIA Working Group (WG) on Technology Assessment and Quality

Progress report on a fully automatic Gas Tungsten Arc Welding (GTAW) system development

Energy Technology Data Exchange (ETDEWEB)

Daumeyer, G.J. III

1994-12-01

A plan to develop a fully automatic gas tungsten arc welding (GTAW) system that will utilize a vision-sensing computer (which will provide in-process feedback control) is presently in work. Evaluations of different technological aspects and system design requirements continue. This report summaries major activities in the plan`s successful progress. The technological feasibility of producing the fully automated GTAW system has been proven. The goal of this process development project is to provide a production-ready system within the shortest reasonable time frame.

Automatic meter reading and PowerPlus services: Concept to implementation

Energy Technology Data Exchange (ETDEWEB)

Perks, D.R. [Alberta Power Ltd., Edmonton, AB (Canada)

1995-12-31

The Distribution Control System Inc.`s Two Way Automatic Communication System (TWACS) was implemented with GE Canada`s 170S automatic meter reader (AMR) at Alberta Power Ltd. Core and extended features are being marketed as PowerPlus{sup TM.} The technology used in the systems, design philosophy, systems components, outbound communication, inbound communication, throughput, and AMR were described. Objectives for the pilot project were to test reliability, accuracy and cost of implementation. Scope of the pilot, and project results were presented. Business aspects of PowerPlus{sup TM }marketing were described. Implementation schedule, constraints, technical problems, training, communication plan, strategy and 1994 year end status of the project were reviewed. Plans for continued development were described. It was predicted that the versatility of the TWACS system, and hard work of every department of Alberta Power will ensure that the implementation program will complete success. 5 figs.

Neural Bases of Automaticity

Science.gov (United States)

Servant, Mathieu; Cassey, Peter; Woodman, Geoffrey F.; Logan, Gordon D.

2018-01-01

Automaticity allows us to perform tasks in a fast, efficient, and effortless manner after sufficient practice. Theories of automaticity propose that across practice processing transitions from being controlled by working memory to being controlled by long-term memory retrieval. Recent event-related potential (ERP) studies have sought to test this…

Fully automatic adjoints: a robust and efficient mechanism for generating adjoint ocean models

Science.gov (United States)

Ham, D. A.; Farrell, P. E.; Funke, S. W.; Rognes, M. E.

2012-04-01

The problem of generating and maintaining adjoint models is sufficiently difficult that typically only the most advanced and well-resourced community ocean models achieve it. There are two current technologies which each suffer from their own limitations. Algorithmic differentiation, also called automatic differentiation, is employed by models such as the MITGCM [2] and the Alfred Wegener Institute model FESOM [3]. This technique is very difficult to apply to existing code, and requires a major initial investment to prepare the code for automatic adjoint generation. AD tools may also have difficulty with code employing modern software constructs such as derived data types. An alternative is to formulate the adjoint differential equation and to discretise this separately. This approach, known as the continuous adjoint and employed in ROMS [4], has the disadvantage that two different model code bases must be maintained and manually kept synchronised as the model develops. The discretisation of the continuous adjoint is not automatically consistent with that of the forward model, producing an additional source of error. The alternative presented here is to formulate the flow model in the high level language UFL (Unified Form Language) and to automatically generate the model using the software of the FEniCS project. In this approach it is the high level code specification which is differentiated, a task very similar to the formulation of the continuous adjoint [5]. However since the forward and adjoint models are generated automatically, the difficulty of maintaining them vanishes and the software engineering process is therefore robust. The scheduling and execution of the adjoint model, including the application of an appropriate checkpointing strategy is managed by libadjoint [1]. In contrast to the conventional algorithmic differentiation description of a model as a series of primitive mathematical operations, libadjoint employs a new abstraction of the simulation

Comparison of reactor RA-4 kinetics with simulations with Matlab-Simulink for one group and six groups of delayed neutrons

International Nuclear Information System (INIS)

Orso, J A

2012-01-01

The critical state of a nuclear reactor is an unstable equilibrium. The nuclear reactor can go from critical to subcritical state or can go from critical to hypercritical state. Although the evolution of the system in these cases is slow, it requires the intervention of an operator to correct deviations. For this reason an automatic control technique was designed, based on the kinetic point to a group of delayed neutrons, which corrects deviations automatically. In this paper we study the point kinetics models in a group and six groups of delayed neutrons for different values of reactivity using the simulations software MATLAB, Simulink. A comparison of two models with the reactor kinetic behavior is made (author)

Brand and automaticity

OpenAIRE

Liu, J.

2008-01-01

A presumption of most consumer research is that consumers endeavor to maximize the utility of their choices and are in complete control of their purchasing and consumption behavior. However, everyday life experience suggests that many of our choices are not all that reasoned or conscious. Indeed, automaticity, one facet of behavior, is indispensable to complete the portrait of consumers. Despite its importance, little attention is paid to how the automatic side of behavior can be captured and...

[Comparison of different types automatic water-supply system for mouse rearing (author's transl)].

Science.gov (United States)

Kikuchi, S; Suzuki, M; Tagashira, Y

1979-04-01

Rearing and breeding scores were compared between groups of mice (JCL : ICR and ddN strains) raised with two different types of automatic water-supply systems; the Japanese type and the American type, using manual water-supply system as control. The mice raised with the manual water-supply system were superior in body weight gain as compared to those with two automatic water-supply systems. As to the survival rate, however, the m; anual water-supply system and the Japanese type gave better results than the American type. As to weanling rate in the breeding test, the manual water-supply system gave somewhat better result than either of the two automatic types. Accidental water leaks, which are serious problems of automatic systems, occurred frequently only when the American type was used. Only one defect of the Japanese type revealed was that it was unfavorable for mice with smaller size (e.g., young ddN mice), resulting in lower body weight gain as well as lower breeding scores.

Automatic Speech Acquisition and Recognition for Spacesuit Audio Systems

Science.gov (United States)

Ye, Sherry

2015-01-01

NASA has a widely recognized but unmet need for novel human-machine interface technologies that can facilitate communication during astronaut extravehicular activities (EVAs), when loud noises and strong reverberations inside spacesuits make communication challenging. WeVoice, Inc., has developed a multichannel signal-processing method for speech acquisition in noisy and reverberant environments that enables automatic speech recognition (ASR) technology inside spacesuits. The technology reduces noise by exploiting differences between the statistical nature of signals (i.e., speech) and noise that exists in the spatial and temporal domains. As a result, ASR accuracy can be improved to the level at which crewmembers will find the speech interface useful. System components and features include beam forming/multichannel noise reduction, single-channel noise reduction, speech feature extraction, feature transformation and normalization, feature compression, and ASR decoding. Arithmetic complexity models were developed and will help designers of real-time ASR systems select proper tasks when confronted with constraints in computational resources. In Phase I of the project, WeVoice validated the technology. The company further refined the technology in Phase II and developed a prototype for testing and use by suited astronauts.

Development of advanced automatic operation system for nuclear ship. 1. Perfect automatic normal operation

International Nuclear Information System (INIS)

Nakazawa, Toshio; Yabuuti, Noriaki; Takahashi, Hiroki; Shimazaki, Junya

1999-02-01

Development of operation support system such as automatic operating system and anomaly diagnosis systems of nuclear reactor is very important in practical nuclear ship because of a limited number of operators and severe conditions in which receiving support from others in a case of accident is very difficult. The goal of development of the operation support systems is to realize the perfect automatic control system in a series of normal operation from the reactor start-up to the shutdown. The automatic control system for the normal operation has been developed based on operating experiences of the first Japanese nuclear ship 'Mutsu'. Automation technique was verified by 'Mutsu' plant data at manual operation. Fully automatic control of start-up and shutdown operations was achieved by setting the desired value of operation and the limiting value of parameter fluctuation, and by making the operation program of the principal equipment such as the main coolant pump and the heaters. This report presents the automatic operation system developed for the start-up and the shutdown of reactor and the verification of the system using the Nuclear Ship Engineering Simulator System. (author)

Evaluation of automatic densitometer with laser diode

International Nuclear Information System (INIS)

Larrea Cox, Pedro J.; Hernandez Tabares, Lorenzo; Suarez San Pedro, Cirilo E.; Vazquez Cano, Aradys; Reyes Rodriguez, Marlen de los

2009-01-01

The evaluation of a prototype of an automatic transmission scanning densitometer is presented. It contains a semiconductor diode laser as a light source, and is mainly oriented to the analysis of protein electrophoresis. It was developed on the Center for Technological Applications and Nuclear Development (CEADEN). Its technical specifications were established and certified by the National Institute of Researches on Metrology (INIMET), and also the equipment was submitted for assays to the Process Control Laboratory, that belongs to the 'Adalberto Pesant' Enterprise for Sera and Hemo derivatives Products, in Havana city, where it was employed to the partial quality control of products that are made there, achieving satisfactory results. (Author)

14 CFR 23.1329 - Automatic pilot system.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Automatic pilot system. 23.1329 Section 23...: Installation § 23.1329 Automatic pilot system. If an automatic pilot system is installed, it must meet the following: (a) Each system must be designed so that the automatic pilot can— (1) Be quickly and positively...

46 CFR 52.01-10 - Automatic controls.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Automatic controls. 52.01-10 Section 52.01-10 Shipping... Requirements § 52.01-10 Automatic controls. (a) Each main boiler must meet the special requirements for automatic safety controls in § 62.35-20(a)(1) of this chapter. (b) Each automatically controlled auxiliary...

Depression, automatic thoughts, alexithymia, and assertiveness in patients with tension-type headache.

Science.gov (United States)

Yücel, Basak; Kora, Kaan; Ozyalçín, Süleyman; Alçalar, Nilüfer; Ozdemir, Ozay; Yücel, Aysen

2002-03-01

The role of psychological factors related to headache has long been a focus of investigation. The aim of this study was to evaluate depression, automatic thoughts, alexithymia, and assertiveness in persons with tension-type headache and to compare the results with those from healthy controls. One hundred five subjects with tension-type headache (according to the criteria of the International Headache Society classification) and 70 controls were studied. The Beck Depression Inventory, Automatic Thoughts Scale, Toronto Alexithymia Scale, and Rathus Assertiveness Schedule were administered to both groups. Sociodemographic variables and headache features were evaluated via a semistructured scale. Compared with healthy controls, the subjects with headache had significantly higher scores on measures of depression, automatic thoughts, and alexithymia and lower scores on assertiveness. Subjects with chronic tension-type headache had higher depression and automatic thoughts scores than those with episodic tension-type headache. These findings suggested that persons with tension-type headache have high depression scores and also may have difficulty with expression of their emotions. Headache frequency appears to influence the likelihood of coexisting depression.

The use of a new automatic device for patients' assessment at Triage in Emergency Department

Directory of Open Access Journals (Sweden)

Salvatore Di Somma

2013-06-01

Full Text Available Objectives: To assess time saving in an Emergency Department arising out of the introduction of automatic devices (Carescape™ V100 to measure vital signs compared to the manual devices. Methods: We performed a prospective, observational study of eligible patients referring to Sant’Andrea Hospital Emergency Department during the entire month of October 2009, randomly assigned into two groups. In the first group of 476 patients vital signs measurements were detected with manual devices, while in the second group of 477 patients with automatic device Carescape™ V100. Results: Data indicated that the comparison of the total time between the two groups gave a significant difference (1993 vs 1518 min, p < 0.001. No differences were found with respect to age, sex and priority codes. Significant differences were also found when comparing the subgroups of the same acuity categories: white codes 4.33 vs 2.27 (min, p < 0.05; green codes 4.28 vs 3.37 (min, p < 0.001; yellow codes 3.92 vs 2.72 (min, p < 0.001. Conclusions: Our data demonstrated a statistical significance between the two groups with a difference of 475 minutes spent in Triage procedures including vital signs measurements. In conclusion time saved by vital signs automatic device could allow ED physicians to make a qualified approach with an earlier diagnosis and a more rapid and effective therapy, possibly improving patients’ outcomes. ABSTRACT of data concerning vital signs quality assessment, because we did not compare the two methods in the same patient and we did not correlate Triage priority evaluation with patients’ outcomes. In the future further studies should be specifically aimed to address this issue. In conclusion time saved by vital signs automatic device could allow ED physicians to make a qualified approach to patient with an earlier diagnosis and a more rapid and effective therapy, possibly improving patients’ outcomes.

Automatic welding and cladding in heavy fabrication

International Nuclear Information System (INIS)

Altamer, A. de

1980-01-01

A description is given of the automatic welding processes used by an Italian fabricator of pressure vessels for petrochemical and nuclear plant. The automatic submerged arc welding, submerged arc strip cladding, pulsed TIG, hot wire TIG and MIG welding processes have proved satisfactory in terms of process reliability, metal deposition rate, and cost effectiveness for low alloy and carbon steels. An example shows sequences required during automatic butt welding, including heat treatments. Factors which govern satisfactory automatic welding include automatic anti-drift rotator device, electrode guidance and bead programming system, the capability of single and dual head operation, flux recovery and slag removal systems, operator environment and controls, maintaining continuity of welding and automatic reverse side grinding. Automatic welding is used for: joining vessel sections; joining tubes to tubeplate; cladding of vessel rings and tubes, dished ends and extruded nozzles; nozzle to shell and butt welds, including narrow gap welding. (author)

[Genotyping of ABO Blood Group in Partial Population of Yunnan Province by SNaPshot Technology].

Science.gov (United States)

Yu, S X; Zeng, F M; Jin, Y Z; Wan, H J; Zhai, D; Xing, Y M; Cheng, B W

2017-06-01

To detect the genotype of ABO blood group by SNaPshot technology. DNA were extracted from the peripheral blood samples with known blood groups （obtained by serology） of 107 unrelated individuals in Yunnan. Six SNP loci of the 261th, 297th, 681th, 703th, 802th, and 803th nucleotide positions were detected by SNaPshot Multiplex kit, and relevant genetics parameters were calculated. In 107 blood samples, the allele frequencies of types A, B, O A , and O G were 0.355 1, 0.168 2, 0.230 0 and 0.247 6, respectively, while that of types A G and cis AB were not detected. The genotyping results of ABO blood group were consistent with that of serologic testing. SNaPshot technology can be adapted for genotyping of ABO blood group. Copyright© by the Editorial Department of Journal of Forensic Medicine

Comparison of automatical thoughts among generalized anxiety disorder, major depressive disorder and generalized social phobia patients.

Science.gov (United States)

Gül, A I; Simsek, G; Karaaslan, Ö; Inanir, S

2015-08-01

Automatic thoughts are measurable cognitive markers of the psychopathology and coping styles of individuals. This study measured and compared the automatic thoughts of patients with generalized anxiety disorder (GAD), major depressive disorder (MDD), and generalized social phobia (GSP). Fifty-two patients with GAD, 53 with MDD, and 50 with GSP and 52 healthy controls completed the validated Automatic Thoughts Questionnaire (ATQ) and a structured psychiatric interview. Patients with GAD, MDD, and GSP also completed the validated Generalized Anxiety Disorder-7 questionnaire, the Beck Depression Inventory (BDI), and the Liebowitz Social Anxiety Scale (LSAS) to determine the severity of their illnesses. All scales were completed before treatment and after diagnosis. The ATQ scores of all pairs of groups were compared. The ATQ scores of the GAD, MDD, and GSP groups were significantly higher than were those of the control group. We also found significant correlations among scores on the GAD-7, BDI, and LSAS. The mean age of patients with GSP was lower than was that of the other groups (30.90 ± 8.35). The significantly higher ATQ scores of the MDD, GAD, and GSP groups, compared with the control group, underscore the common cognitive psychopathology characterizing these three disorders. This finding confirms that similar cognitive therapy approaches should be effective for these patients. This study is the first to compare GAD, MDD, and GSP from a cognitive perspective.

Remote technology in spent fuel management. Proceedings of an advisory group meeting

International Nuclear Information System (INIS)

1999-01-01

Spent fuel management has always been one of the important stages in the nuclear fuel cycle and it is still one of the most vital problems common to all countries with nuclear reactors. It begins with the discharge of spent fuel from a power or research reactor and ends with its ultimate disposition either by direct disposal or by reprocessing of the spent fuel. Continuous attention is being given by the IAEA to the collection, analysis and exchange of information on spent fuel management. Its role in this area is to provide a forum for exchanging information and development activities that are of common interest. Within its spent fuel management programme, the IAEA has monitored the progress, the benefits and the implementation of remote technologies such as remote tools, robotics, etc. An Advisory Group Meeting on Remote Technology in Spent Fuel Management was held in September 1997 in order to bring together specialists working in this field and to collect information on new technical and economic developments. The objective of the Advisory Group meeting was to review remote technologies in use for the complete range of spent fuel handling and spent fuel management covering wet and dry environments, to describe ongoing developments and to prepare a technical report. This document contains contributions presented at the Meeting. Each paper was indexed and provided with an abstract

Automatic differentiation of functions

International Nuclear Information System (INIS)

Douglas, S.R.

1990-06-01

Automatic differentiation is a method of computing derivatives of functions to any order in any number of variables. The functions must be expressible as combinations of elementary functions. When evaluated at specific numerical points, the derivatives have no truncation error and are automatically found. The method is illustrated by simple examples. Source code in FORTRAN is provided

Heterogeneous technologies, strategic groups and environmental efficiency technology gaps for European countries

International Nuclear Information System (INIS)

Kounetas, Konstantinos

2015-01-01

This paper measures technology (TG) and environmental efficiency technology gaps (EETGs) in 25 European countries over two distinct periods 2002 and 2008 examining the possible effect of adopted environmental regulations and the Kyoto protocol commitments on environmental efficiency technology gaps. However, the introduction of the metafrontier in our analysis puts into our discussion the role of heterogeneous technologies and its effect on the above-mentioned measures. Employing a directional distance function, we investigate whether there is an actual difference, in terms of environmental efficiency and efficiency performance, among European countries considering the technological frontiers under which they operate. The construction of individual frontiers has been realized employing a large number of variables that are highly correlated with countries' learning and absorbing capacity, new technological knowledge and using economic theory and classical frontier discrimination like developed vs. developing, North vs. South and participation in the Eurozone or not. The overall results indicate a crucial role of heterogeneous technologies for technology gaps in both periods. Moreover, a significant decrease for both measures, although in different percent, has been recorded emphasizing the key role of knowledge spillovers. -- Highlights: •We estimate technology gaps (TGs) for 25 EU countries in two distinct periods. •We estimate environmental efficiency technology gaps (EETGs). •We consider countries' technological capabilities with R&D, innovation and eco-innovation. •We test the effect of different frontier constitutions on TGs-EETGs. •We denote the specific role of knowledge spillovers

Pre-Session Satiation as a Treatment for Stereotypy During Group Activities.

Science.gov (United States)

Rispoli, Mandy; Camargo, Síglia Hoher; Neely, Leslie; Gerow, Stephanie; Lang, Russell; Goodwyn, Fara; Ninci, Jennifer

2014-05-01

Individuals with developmental disabilities may engage in automatically reinforced behaviors that may interfere with learning opportunities. Manipulation of motivating operations has been shown to reduce automatically maintained behavior in some individuals. Considering behavioral indicators of satiation may assist in identifying the point at which an abolishing operation has begun to effect behavior. The purpose of this study was to evaluate the effects of pre-session satiation of automatic reinforcement on subsequent levels of stereotypy and activity engagement during group activities for three males ages 5 to 13 years with developmental disabilities. Following functional analyses with analogue conditions, an alternating treatment design compared a pre-session access to stereotypy condition with a no-pre-session access condition prior to group activity sessions. Results indicated that pre-session satiation of the putative reinforcer produced by stereotypy was effective in decreasing stereotypy and increasing activity engagement during subsequent group activities for all participants. These findings add to the literature supporting the effectiveness of abolishing operations to decrease automatically maintained stereotypy. © The Author(s) 2013.

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: a report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council.

Science.gov (United States)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith

2012-05-01

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology "automatic dose rate and image quality" (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: A Report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council

Energy Technology Data Exchange (ETDEWEB)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith [Henry Ford Health System, Detroit, Michigan 48202 (United States); Beth Israel Deaconess Medical Center, Boston, Massachusetts 02115 (United States); Columbia University Medical Center, New York, New York 10032 (United States); Shiga Medical Center for Children, Moriyama City, Shiga-Ken, Japan 524-0022 (Japan); University of Virginia Health Science Center, Charlottesville, Virginia 22908 (United States); Baystate Health Systems, Inc., Springfield, Massachusetts 01199 (United States); Columbia University Medical Center, New York, New York 10032 (United States); University of Texas M.D. Anderson Cancer Center, Houston, Texas 77030 (United States); Cincinnati Children' s Hospital Medical Center, Cincinnati, Ohio 45229 (United States)

2012-05-15

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology ''automatic dose rate and image quality'' (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: A Report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council

International Nuclear Information System (INIS)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith

2012-01-01

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology ''automatic dose rate and image quality'' (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were

Engaging the public with low-carbon energy technologies: Results from a Scottish large group process

International Nuclear Information System (INIS)

Howell, Rhys; Shackley, Simon; Mabon, Leslie; Ashworth, Peta; Jeanneret, Talia

2014-01-01

This paper presents the results of a large group process conducted in Edinburgh, Scotland investigating public perceptions of climate change and low-carbon energy technologies, specifically carbon dioxide capture and storage (CCS). The quantitative and qualitative results reported show that the participants were broadly supportive of efforts to reduce carbon dioxide emissions, and that there is an expressed preference for renewable energy technologies to be employed to achieve this. CCS was considered in detail during the research due to its climate mitigation potential; results show that the workshop participants were cautious about its deployment. The paper discusses a number of interrelated factors which appear to influence perceptions of CCS; factors such as the perceived costs and benefits of the technology, and people's personal values and trust in others all impacted upon participants’ attitudes towards the technology. The paper thus argues for the need to provide the public with broad-based, balanced and trustworthy information when discussing CCS, and to take seriously the full range of factors that influence public perceptions of low-carbon technologies. - Highlights: • We report the results of a Scottish large group workshop on energy technologies. • There is strong public support for renewable energy and mixed opinions towards CCS. • The workshop was successful in initiating discussion around climate change and energy technologies. • Issues of trust, uncertainty, costs, benefits, values and emotions all inform public perceptions. • Need to take seriously the full range of factors that inform perceptions

Automatic control in multidrive electrotechnical complexes with semiconductor converters

Science.gov (United States)

Vasilev, B. U.; Mardashov, D. V.

2017-01-01

The frequency convertor and the automatic control system, which can be used in the multi-drive electromechanical system with a few induction motions, are considered. The paper presents the structure of existing modern multi-drive electric drives inverters, namely, electric drives with a total frequency converter and few electric motions, and an electric drive, in which the converter is used for power supply and control of the independent frequency. It was shown that such technical solutions of frequency converters possess a number of drawbacks. The drawbacks are given. It was shown that the control of technological processes using the electric drive of this structure may be provided under very limited conditions, as the energy efficiency and the level of electromagnetic compatibility of electric drives is low. The authors proposed using a multi-inverter structure with an active rectifier in multidrive electric drives with induction motors frequency converters. The application of such frequency converter may solve the problem of electromagnetic compatibility, namely, consumption of sinusoidal currents from the network and the maintenance of a sinusoidal voltage and energy compatibility, namely, consumption of practically active energy from the network. Also, the paper proposes the use of the automatic control system, which by means of a multi-inverter frequency converter provides separate control of drive machines and flexible regulation of technological processes. The authors present oscillograms, which confirm the described characteristics of the developed electrical drive. The possible subsequent ways to improve the multi-motor drives are also described.

Analysis of key technologies for virtual instruments metrology

Science.gov (United States)

Liu, Guixiong; Xu, Qingui; Gao, Furong; Guan, Qiuju; Fang, Qiang

2008-12-01

Virtual instruments (VIs) require metrological verification when applied as measuring instruments. Owing to the software-centered architecture, metrological evaluation of VIs includes two aspects: measurement functions and software characteristics. Complexity of software imposes difficulties on metrological testing of VIs. Key approaches and technologies for metrology evaluation of virtual instruments are investigated and analyzed in this paper. The principal issue is evaluation of measurement uncertainty. The nature and regularity of measurement uncertainty caused by software and algorithms can be evaluated by modeling, simulation, analysis, testing and statistics with support of powerful computing capability of PC. Another concern is evaluation of software features like correctness, reliability, stability, security and real-time of VIs. Technologies from software engineering, software testing and computer security domain can be used for these purposes. For example, a variety of black-box testing, white-box testing and modeling approaches can be used to evaluate the reliability of modules, components, applications and the whole VI software. The security of a VI can be assessed by methods like vulnerability scanning and penetration analysis. In order to facilitate metrology institutions to perform metrological verification of VIs efficiently, an automatic metrological tool for the above validation is essential. Based on technologies of numerical simulation, software testing and system benchmarking, a framework for the automatic tool is proposed in this paper. Investigation on implementation of existing automatic tools that perform calculation of measurement uncertainty, software testing and security assessment demonstrates the feasibility of the automatic framework advanced.

Flattening filter-free accelerators: a report from the AAPM Therapy Emerging Technology Assessment Work Group.

Science.gov (United States)

Xiao, Ying; Kry, Stephen F; Popple, Richard; Yorke, Ellen; Papanikolaou, Niko; Stathakis, Sotirios; Xia, Ping; Huq, Saiful; Bayouth, John; Galvin, James; Yin, Fang-Fang

2015-05-08

This report describes the current state of flattening filter-free (FFF) radiotherapy beams implemented on conventional linear accelerators, and is aimed primarily at practicing medical physicists. The Therapy Emerging Technology Assessment Work Group of the American Association of Physicists in Medicine (AAPM) formed a writing group to assess FFF technology. The published literature on FFF technology was reviewed, along with technical specifications provided by vendors. Based on this information, supplemented by the clinical experience of the group members, consensus guidelines and recommendations for implementation of FFF technology were developed. Areas in need of further investigation were identified. Removing the flattening filter increases beam intensity, especially near the central axis. Increased intensity reduces treatment time, especially for high-dose stereotactic radiotherapy/radiosurgery (SRT/SRS). Furthermore, removing the flattening filter reduces out-of-field dose and improves beam modeling accuracy. FFF beams are advantageous for small field (e.g., SRS) treatments and are appropriate for intensity-modulated radiotherapy (IMRT). For conventional 3D radiotherapy of large targets, FFF beams may be disadvantageous compared to flattened beams because of the heterogeneity of FFF beam across the target (unless modulation is employed). For any application, the nonflat beam characteristics and substantially higher dose rates require consideration during the commissioning and quality assurance processes relative to flattened beams, and the appropriate clinical use of the technology needs to be identified. Consideration also needs to be given to these unique characteristics when undertaking facility planning. Several areas still warrant further research and development. Recommendations pertinent to FFF technology, including acceptance testing, commissioning, quality assurance, radiation safety, and facility planning, are presented. Examples of clinical

Component simulation in problems of calculated model formation of automatic machine mechanisms

Directory of Open Access Journals (Sweden)

Telegin Igor

2017-01-01

Full Text Available The paper deals with the problems of the component simulation method application in the problems of the automation of the mechanical system model formation with the further possibility of their CAD-realization. The purpose of the investigations mentioned consists in the automation of the CAD-model formation of high-speed mechanisms in automatic machines and in the analysis of dynamic processes occurred in their units taking into account their elasto-inertial properties, power dissipation, gaps in kinematic pairs, friction forces, design and technological loads. As an example in the paper there are considered a formalization of stages in the computer model formation of the cutting mechanism in cold stamping automatic machine AV1818 and methods of for the computation of their parameters on the basis of its solid-state model.

Automatic and controlled processing and the Broad Autism Phenotype.

Science.gov (United States)

Camodeca, Amy; Voelker, Sylvia

2016-01-30

Research related to verbal fluency in the Broad Autism Phenotype (BAP) is limited and dated, but generally suggests intact abilities in the context of weaknesses in other areas of executive function (Hughes et al., 1999; Wong et al., 2006; Delorme et al., 2007). Controlled processing, the generation of search strategies after initial, automated responses are exhausted (Spat, 2013), has yet to be investigated in the BAP, and may be evidenced in verbal fluency tasks. One hundred twenty-nine participants completed the Delis-Kaplan Executive Function System Verbal Fluency test (D-KEFS; Delis et al., 2001) and the Broad Autism Phenotype Questionnaire (BAPQ; Hurley et al., 2007). The BAP group (n=53) produced significantly fewer total words during the 2nd 15" interval compared to the Non-BAP (n=76) group. Partial correlations indicated similar relations between verbal fluency variables for each group. Regression analyses predicting 2nd 15" interval scores suggested differentiation between controlled and automatic processing skills in both groups. Results suggest adequate automatic processing, but slowed development of controlled processing strategies in the BAP, and provide evidence for similar underlying cognitive constructs for both groups. Controlled processing was predictive of Block Design score for Non-BAP participants, and was predictive of Pragmatic Language score on the BAPQ for BAP participants. These results are similar to past research related to strengths and weaknesses in the BAP, respectively, and suggest that controlled processing strategy use may be required in instances of weak lower-level skills. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Individual Differences in Automatic Emotion Regulation Interact with Primed Emotion Regulation during an Anger Provocation

OpenAIRE

Zhang, Jing; Lipp, Ottmar V.; Hu, Ping

2017-01-01

The current study investigated the interactive effects of individual differences in automatic emotion regulation (AER) and primed emotion regulation strategy on skin conductance level (SCL) and heart rate during provoked anger. The study was a 2 × 2 [AER tendency (expression vs. control) × priming (expression vs. control)] between subject design. Participants were assigned to two groups according to their performance on an emotion regulation-IAT (differentiating automatic emotion control tend...

Acquisition of automatic imitation is sensitive to sensorimotor contingency.

Science.gov (United States)

Cook, Richard; Press, Clare; Dickinson, Anthony; Heyes, Cecilia

2010-08-01

The associative sequence learning model proposes that the development of the mirror system depends on the same mechanisms of associative learning that mediate Pavlovian and instrumental conditioning. To test this model, two experiments used the reduction of automatic imitation through incompatible sensorimotor training to assess whether mirror system plasticity is sensitive to contingency (i.e., the extent to which activation of one representation predicts activation of another). In Experiment 1, residual automatic imitation was measured following incompatible training in which the action stimulus was a perfect predictor of the response (contingent) or not at all predictive of the response (noncontingent). A contingency effect was observed: There was less automatic imitation indicative of more learning in the contingent group. Experiment 2 replicated this contingency effect and showed that, as predicted by associative learning theory, it can be abolished by signaling trials in which the response occurs in the absence of an action stimulus. These findings support the view that mirror system development depends on associative learning and indicate that this learning is not purely Hebbian. If this is correct, associative learning theory could be used to explain, predict, and intervene in mirror system development.

Automatic Mosaicking of Satellite Imagery Considering the Clouds

Science.gov (United States)

Kang, Yifei; Pan, Li; Chen, Qi; Zhang, Tong; Zhang, Shasha; Liu, Zhang

2016-06-01

With the rapid development of high resolution remote sensing for earth observation technology, satellite imagery is widely used in the fields of resource investigation, environment protection, and agricultural research. Image mosaicking is an important part of satellite imagery production. However, the existence of clouds leads to lots of disadvantages for automatic image mosaicking, mainly in two aspects: 1) Image blurring may be caused during the process of image dodging, 2) Cloudy areas may be passed through by automatically generated seamlines. To address these problems, an automatic mosaicking method is proposed for cloudy satellite imagery in this paper. Firstly, modified Otsu thresholding and morphological processing are employed to extract cloudy areas and obtain the percentage of cloud cover. Then, cloud detection results are used to optimize the process of dodging and mosaicking. Thus, the mosaic image can be combined with more clear-sky areas instead of cloudy areas. Besides, clear-sky areas will be clear and distortionless. The Chinese GF-1 wide-field-of-view orthoimages are employed as experimental data. The performance of the proposed approach is evaluated in four aspects: the effect of cloud detection, the sharpness of clear-sky areas, the rationality of seamlines and efficiency. The evaluation results demonstrated that the mosaic image obtained by our method has fewer clouds, better internal color consistency and better visual clarity compared with that obtained by traditional method. The time consumed by the proposed method for 17 scenes of GF-1 orthoimages is within 4 hours on a desktop computer. The efficiency can meet the general production requirements for massive satellite imagery.

An algorithm for generating data accessibility recommendations for flight deck Automatic Dependent Surveillance-Broadcast (ADS-B) applications

Science.gov (United States)

2014-09-09

Automatic Dependent Surveillance-Broadcast (ADS-B) In technology supports the display of traffic data on Cockpit Displays of Traffic Information (CDTIs). The data are used by flightcrews to perform defined self-separation procedures, such as the in-t...

Automatic failure identification of the nuclear power plant pellet fuel

International Nuclear Information System (INIS)

Oliveira, Adriano Fortunato de

2010-01-01

This paper proposed the development of an automatic technique for evaluating defects to help in the stage of fabrication of fuel elements. Was produced an intelligent image analysis for automatic recognition of defects in uranium pellets. Therefore, an Artificial Neural Network (ANN) was trained using segments of histograms of pellets, containing examples of both normal (no fault) and of defectives pellets (with major defects normally found). The images of the pellets were segmented into 11 shares. Histograms were made of these segments and trained the ANN. Besides automating the process, the system was able to obtain this classification accuracy of 98.33%. Although this percentage represents a significant advance ever in the quality control process, the use of more advanced techniques of photography and lighting will reduce it to insignificant levels with low cost. Technologically, the method developed, should it ever be implemented, will add substantial value in terms of process quality control and production outages in relation to domestic manufacturing of nuclear fuel. (author)

Design of Automatic Extraction Algorithm of Knowledge Points for MOOCs

Directory of Open Access Journals (Sweden)

Haijian Chen

2015-01-01

Full Text Available In recent years, Massive Open Online Courses (MOOCs are very popular among college students and have a powerful impact on academic institutions. In the MOOCs environment, knowledge discovery and knowledge sharing are very important, which currently are often achieved by ontology techniques. In building ontology, automatic extraction technology is crucial. Because the general methods of text mining algorithm do not have obvious effect on online course, we designed automatic extracting course knowledge points (AECKP algorithm for online course. It includes document classification, Chinese word segmentation, and POS tagging for each document. Vector Space Model (VSM is used to calculate similarity and design the weight to optimize the TF-IDF algorithm output values, and the higher scores will be selected as knowledge points. Course documents of “C programming language” are selected for the experiment in this study. The results show that the proposed approach can achieve satisfactory accuracy rate and recall rate.

[The automatic iris map overlap technology in computer-aided iridiagnosis].

Science.gov (United States)

He, Jia-feng; Ye, Hu-nian; Ye, Miao-yuan

2002-11-01

In the paper, iridology and computer-aided iridiagnosis technologies are briefly introduced and the extraction method of the collarette contour is then investigated. The iris map can be overlapped on the original iris image based on collarette contour extraction. The research on collarette contour extraction and iris map overlap is of great importance to computer-aided iridiagnosis technologies.

Semi-Automatic Rating Method for Neutrophil Alkaline Phosphatase Activity.

Science.gov (United States)

Sugano, Kanae; Hashi, Kotomi; Goto, Misaki; Nishi, Kiyotaka; Maeda, Rie; Kono, Keigo; Yamamoto, Mai; Okada, Kazunori; Kaga, Sanae; Miwa, Keiko; Mikami, Taisei; Masauzi, Nobuo

2017-01-01

The neutrophil alkaline phosphatase (NAP) score is a valuable test for the diagnosis of myeloproliferative neoplasms, but it has still manually rated. Therefore, we developed a semi-automatic rating method using Photoshop ® and Image-J, called NAP-PS-IJ. Neutrophil alkaline phosphatase staining was conducted with Tomonaga's method to films of peripheral blood taken from three healthy volunteers. At least 30 neutrophils with NAP scores from 0 to 5+ were observed and taken their images. From which the outer part of neutrophil was removed away with Image-J. These were binarized with two different procedures (P1 and P2) using Photoshop ® . NAP-positive area (NAP-PA) and granule (NAP-PGC) were measured and counted with Image-J. The NAP-PA in images binarized with P1 significantly (P < 0.05) differed between images with NAP scores from 0 to 3+ (group 1) and those from 4+ to 5+ (group 2). The original images in group 1 were binarized with P2. NAP-PGC of them significantly (P < 0.05) differed among all four NAP score groups. The mean NAP-PGC with NAP-PS-IJ indicated a good correlation (r = 0.92, P < 0.001) to results by human examiners. The sensitivity and specificity of NAP-PS-IJ were 60% and 92%, which might be considered as a prototypic method for the full-automatic rating NAP score. © 2016 Wiley Periodicals, Inc.

Automatic garment template sewing technology based on machine identification%基于机器识别的全自动服装模板缝纫技术

Institute of Scientific and Technical Information of China (English)

张华玲; 戴斌辉; 原竞杰

2016-01-01

In view of the low efficiency of the traditional garment sewing process and dependence on the manual operation and other issues,a kind of automatic sewing technology of intelligent garment templates is put forward based on visual technology.The X/Y/Z direction of the three freedom mo-tion of the mechanical body is designed to complete the cutting and molding of the fabric,PVC,leath-er and other different materials.Then by using the teaching acquisition intelligent vision technology, the sample is automaticly generated to complete intelligent traj ectory planning,and drive sequential action of mechanical body through the embedded platform.The automation of garment sewing clothing is realized,improving the streamlined,standardized and efficient operations,decreasing the depend-ence of garment factory on skilled workers.%针对传统服装缝制工艺效率低且依赖于人工操作等问题，提出一种基于智能视觉技术的全自动服装模板缝纫技术。设计一个可沿 X/Y/Z 3个方向自由运动的机械本体，完成对面料、PVC、皮革等不同材料的裁剪和制模；运用智能视觉技术软件进行视教采集，自动生成样片完成智能轨迹规划并通过嵌入式平台驱动机械本体的顺序动作，实现服装缝制自动化，提高服装作业的流水化、标准化、高效化，降低服装厂对熟练工的依赖性。

The application of charge-coupled device processors in automatic-control systems

Science.gov (United States)

Mcvey, E. S.; Parrish, E. A., Jr.

1977-01-01

The application of charge-coupled device (CCD) processors to automatic-control systems is suggested. CCD processors are a new form of semiconductor component with the unique ability to process sampled signals on an analog basis. Specific implementations of controllers are suggested for linear time-invariant, time-varying, and nonlinear systems. Typical processing time should be only a few microseconds. This form of technology may become competitive with microprocessors and minicomputers in addition to supplementing them.

Automatic generation of virtual worlds from architectural and mechanical CAD models

International Nuclear Information System (INIS)

Szepielak, D.

2003-12-01

Accelerator projects like the XFEL or the planned linear collider TESLA involve extensive architectural and mechanical design work, resulting in a variety of CAD models. The CAD models will be showing different parts of the project, like e.g. the different accelerator components or parts of the building complexes, and they will be created and stored by different groups in different formats. A complete CAD model of the accelerator and its buildings is thus difficult to obtain and would also be extremely huge and difficult to handle. This thesis describes the design and prototype development of a tool which automatically creates virtual worlds from different CAD models. The tool will enable the user to select a required area for visualization on a map, and then create a 3D-model of the selected area which can be displayed in a web-browser. The thesis first discusses the system requirements and provides some background on data visualization. Then, it introduces the system architecture, the algorithms and the used technologies, and finally demonstrates the capabilities of the system using two case studies. (orig.)

PRESBYOPIA OPTOMETRY METHOD BASED ON DIOPTER REGULATION AND CHARGE COUPLE DEVICE IMAGING TECHNOLOGY.

Science.gov (United States)

Zhao, Q; Wu, X X; Zhou, J; Wang, X; Liu, R F; Gao, J

2015-01-01

With the development of photoelectric technology and single-chip microcomputer technology, objective optometry, also known as automatic optometry, is becoming precise. This paper proposed a presbyopia optometry method based on diopter regulation and Charge Couple Device (CCD) imaging technology and, in the meantime, designed a light path that could measure the system. This method projects a test figure to the eye ground and then the reflected image from the eye ground is detected by CCD. The image is then automatically identified by computer and the far point and near point diopters are determined to calculate lens parameter. This is a fully automatic objective optometry method which eliminates subjective factors of the tested subject. Furthermore, it can acquire the lens parameter of presbyopia accurately and quickly and can be used to measure the lens parameter of hyperopia, myopia and astigmatism.

Modelling the adoption of automatic milking systems in Noord-Holland

OpenAIRE

Matteo Floridi; Fabio Bartolini; Jack Peerlings; Nico Polman; Davide Viaggi

2013-01-01

Innovation and new technology adoption represent two central elements for the business and industry development process in agriculture. One of the most relevant innovations in dairy farms is the robotisation of the milking process through the adoption of Automatic Milking Systems (AMS). The purpose of this paper is to assess the impact of selected Common Agricultural Policy measures on the adoption of AMS in dairy farms. The model developed is a dynamic farm-household model that is able to si...

Railway automatic safety protection system based on GPS

Directory of Open Access Journals (Sweden)

Fu Hai Juan

2016-01-01

Full Text Available The automatic protection system of railway safety is designed for the railway construction workers to protect alarm, and the safety protection device by using GPS satellite positioning system to acquire location information of the operating point, through the CTC/TDCS system and computer monitoring system for the running of the train position and the arithmetic distance. Achieving timely and continuously forecasts about the distance of the train which is apart from the operating point to prompt the voice alarm of the approaching train. Using digital technology to realize the function of the traditional analog interphone, eliminates the quality problems of the call. With the GSM-R, mobile wireless transmission channel and terminal technology, it overcomes the restrictions of the analog interphone which influenced by communication distance and more problems of blind areas. Finally to achieve practical, convenient, applicable and adaptable design goals.

Automatic text summarization

CERN Document Server

Torres Moreno, Juan Manuel

2014-01-01

This new textbook examines the motivations and the different algorithms for automatic document summarization (ADS). We performed a recent state of the art. The book shows the main problems of ADS, difficulties and the solutions provided by the community. It presents recent advances in ADS, as well as current applications and trends. The approaches are statistical, linguistic and symbolic. Several exemples are included in order to clarify the theoretical concepts.  The books currently available in the area of Automatic Document Summarization are not recent. Powerful algorithms have been develop

Automatic Ultrasound Scanning

DEFF Research Database (Denmark)

Moshavegh, Ramin

on the user adjustments on the scanner interface to optimize the scan settings. This explains the huge interest in the subject of this PhD project entitled “AUTOMATIC ULTRASOUND SCANNING”. The key goals of the project have been to develop automated techniques to minimize the unnecessary settings...... on the scanners, and to improve the computer-aided diagnosis (CAD) in ultrasound by introducing new quantitative measures. Thus, four major issues concerning automation of the medical ultrasound are addressed in this PhD project. They touch upon gain adjustments in ultrasound, automatic synthetic aperture image...

Automatic Speech Recognition from Neural Signals: A Focused Review

Directory of Open Access Journals (Sweden)

Christian Herff

2016-09-01

Full Text Available Speech interfaces have become widely accepted and are nowadays integrated in various real-life applications and devices. They have become a part of our daily life. However, speech interfaces presume the ability to produce intelligible speech, which might be impossible due to either loud environments, bothering bystanders or incapabilities to produce speech (i.e.~patients suffering from locked-in syndrome. For these reasons it would be highly desirable to not speak but to simply envision oneself to say words or sentences. Interfaces based on imagined speech would enable fast and natural communication without the need for audible speech and would give a voice to otherwise mute people.This focused review analyzes the potential of different brain imaging techniques to recognize speech from neural signals by applying Automatic Speech Recognition technology. We argue that modalities based on metabolic processes, such as functional Near Infrared Spectroscopy and functional Magnetic Resonance Imaging, are less suited for Automatic Speech Recognition from neural signals due to low temporal resolution but are very useful for the investigation of the underlying neural mechanisms involved in speech processes. In contrast, electrophysiologic activity is fast enough to capture speech processes and is therefor better suited for ASR. Our experimental results indicate the potential of these signals for speech recognition from neural data with a focus on invasively measured brain activity (electrocorticography. As a first example of Automatic Speech Recognition techniques used from neural signals, we discuss the emph{Brain-to-text} system.

Design and implementation of microcontroller-based automatic sequence counting and switching system

Directory of Open Access Journals (Sweden)

Joshua ABOLARINWA

2015-05-01

Full Text Available Technological advancement and its influence on human being have been on the increase in recent time. Major areas of such influence, include monitoring and control activities. In order to keep track of human movement in and out of a particular building, there is the need for an automatic counting system. Therefore, in this paper, we present the design and implementation of a microcontroller-based automatic sequence counting and switching system. This system was designed and developed to save cost, time, energy, and to achieve seamless control in the event of switching on or off of electrical appliances within a building. Top-down modular design approach was used in conjunction with the versatility of microcontroller. The system is able to monitor, sequentially count the number of entry and exit of people through an entrance, afterwards, automatically control any electrical device connected to it. From various tests and measurements obtained, there are comparative benefits derived from the deployment of this system in terms of simplicity and accuracy over similar system that is not microcontroller-based. Therefore, this system can be deployed at commercial quantity with wide range of applications in homes, offices and other public places.

30 CFR 77.314 - Automatic temperature control instruments.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic temperature control instruments. 77... UNDERGROUND COAL MINES Thermal Dryers § 77.314 Automatic temperature control instruments. (a) Automatic temperature control instruments for thermal dryer system shall be of the recording type. (b) Automatic...

Automatic control systems engineering

International Nuclear Information System (INIS)

Shin, Yun Gi

2004-01-01

This book gives descriptions of automatic control for electrical electronics, which indicates history of automatic control, Laplace transform, block diagram and signal flow diagram, electrometer, linearization of system, space of situation, state space analysis of electric system, sensor, hydro controlling system, stability, time response of linear dynamic system, conception of root locus, procedure to draw root locus, frequency response, and design of control system.

Development of on line automatic separation device for apple and sleeve

Science.gov (United States)

Xin, Dengke; Ning, Duo; Wang, Kangle; Han, Yuhang

2018-04-01

Based on STM32F407 single chip microcomputer as control core, automatic separation device of fruit sleeve is designed. This design consists of hardware and software. In hardware, it includes mechanical tooth separator and three degree of freedom manipulator, as well as industrial control computer, image data acquisition card, end effector and other structures. The software system is based on Visual C++ development environment, to achieve localization and recognition of fruit sleeve with the technology of image processing and machine vision, drive manipulator of foam net sets of capture, transfer, the designated position task. Test shows: The automatic separation device of the fruit sleeve has the advantages of quick response speed and high separation success rate, and can realize separation of the apple and plastic foam sleeve, and lays the foundation for further studying and realizing the application of the enterprise production line.

Use of reactivity constraints for the automatic control of reactor power

International Nuclear Information System (INIS)

Bernard, J.A.; Lanning, D.D.; Ray, A.

1985-01-01

A theoretical framework for the automatic control of reactor power has been developed and experimentally evaluated on the 5 MWt Research Reactor that is operated by the Massachusetts Institute of Technology. The controller functions by restricting the net reactivity so that it is always possible to make the reactor period infinite at the desired termination point of a transient by reversing the direction of motion of whatever control mechanism is associated with the controller. This capability is formally designated as ''feasibility of control''. It has been shown experimentally that maintenance of feasibility of control is a sufficient condition for the automatic control of reactor power. This research should be of value in the design of closed-loop controllers, in the creation of reactivity displays, in the provision of guidance to operators regarding the timing of reactivity changes, and as an experimental envelope within which alternate control strategies can be evaluated

Using Technology-Enhanced, Cooperative, Group-Project Learning for Student Comprehension and Academic Performance

Science.gov (United States)

Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

2016-01-01

Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly…

Development of An Automatic Verification Program for Thermal-hydraulic System Codes

Energy Technology Data Exchange (ETDEWEB)

Lee, J. Y.; Ahn, K. T.; Ko, S. H.; Kim, Y. S.; Kim, D. W. [Pusan National University, Busan (Korea, Republic of); Suh, J. S.; Cho, Y. S.; Jeong, J. J. [System Engineering and Technology Co., Daejeon (Korea, Republic of)

2012-05-15

As a project activity of the capstone design competitive exhibition, supported by the Education Center for Green Industry-friendly Fusion Technology (GIFT), we have developed a computer program which can automatically perform non-regression test, which is needed repeatedly during a developmental process of a thermal-hydraulic system code, such as the SPACE code. A non-regression test (NRT) is an approach to software testing. The purpose of the non-regression testing is to verify whether, after updating a given software application (in this case, the code), previous software functions have not been compromised. The goal is to prevent software regression, whereby adding new features results in software bugs. As the NRT is performed repeatedly, a lot of time and human resources will be needed during the development period of a code. It may cause development period delay. To reduce the cost and the human resources and to prevent wasting time, non-regression tests need to be automatized. As a tool to develop an automatic verification program, we have used Visual Basic for Application (VBA). VBA is an implementation of Microsoft's event-driven programming language Visual Basic 6 and its associated integrated development environment, which are built into most Microsoft Office applications (In this case, Excel)

Development of An Automatic Verification Program for Thermal-hydraulic System Codes

International Nuclear Information System (INIS)

Lee, J. Y.; Ahn, K. T.; Ko, S. H.; Kim, Y. S.; Kim, D. W.; Suh, J. S.; Cho, Y. S.; Jeong, J. J.

2012-01-01

As a project activity of the capstone design competitive exhibition, supported by the Education Center for Green Industry-friendly Fusion Technology (GIFT), we have developed a computer program which can automatically perform non-regression test, which is needed repeatedly during a developmental process of a thermal-hydraulic system code, such as the SPACE code. A non-regression test (NRT) is an approach to software testing. The purpose of the non-regression testing is to verify whether, after updating a given software application (in this case, the code), previous software functions have not been compromised. The goal is to prevent software regression, whereby adding new features results in software bugs. As the NRT is performed repeatedly, a lot of time and human resources will be needed during the development period of a code. It may cause development period delay. To reduce the cost and the human resources and to prevent wasting time, non-regression tests need to be automatized. As a tool to develop an automatic verification program, we have used Visual Basic for Application (VBA). VBA is an implementation of Microsoft's event-driven programming language Visual Basic 6 and its associated integrated development environment, which are built into most Microsoft Office applications (In this case, Excel)

Automatically Maintain Climatic Conditions inside Agricultural Greenhouses

Directory of Open Access Journals (Sweden)

Ali Jasim Ramadhan

2016-11-01

Full Text Available In this work, a novel system is designed to remote monitor / automatic control of the temperature, humidity and soil moisture of the agricultural greenhouses. In the proposed system, the author used the mentioned sensors for monitoring the climatic conditions of the agricultural greenhouses; and the system makes a controlling process to fix the required parameters for plant growth by running / stopping the fan, air exchanger and irrigation devices when any changes happened in these parameters. The presented system is based on XBee protocol in the implemented wireless sensor star topology network (WSN to monitor the agricultural greenhouses in real time, and used the GSM and Internet technologies to monitor the agricultural greenhouses from anywhere.

Development of advanced automatic control system for nuclear ship. 2. Perfect automatic operation after reactor scram events

International Nuclear Information System (INIS)

Yabuuchi, Noriaki; Nakazawa, Toshio; Takahashi, Hiroki; Shimazaki, Junya; Hoshi, Tsutao

1997-11-01

An automatic operation system has been developed for the purpose of realizing a perfect automatic plant operation after reactor scram events. The goal of the automatic operation after a reactor scram event is to bring the reactor hot stand-by condition automatically. The basic functions of this system are as follows; to monitor actions of the equipments of safety actions after a reactor scram, to control necessary control equipments to bring a reactor to a hot stand-by condition automatically, and to energize a decay heat removal system. The performance evaluation on this system was carried out by comparing the results using to Nuclear Ship Engineering Simulation System (NESSY) and the those measured in the scram test of the nuclear ship 'Mutsu'. As the result, it was showed that this system had the sufficient performance to bring a reactor to a hot syand-by condition quickly and safety. (author)

Development of advanced automatic control system for nuclear ship. 2. Perfect automatic operation after reactor scram events

Energy Technology Data Exchange (ETDEWEB)

Yabuuchi, Noriaki; Nakazawa, Toshio; Takahashi, Hiroki; Shimazaki, Junya; Hoshi, Tsutao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-11-01

An automatic operation system has been developed for the purpose of realizing a perfect automatic plant operation after reactor scram events. The goal of the automatic operation after a reactor scram event is to bring the reactor hot stand-by condition automatically. The basic functions of this system are as follows; to monitor actions of the equipments of safety actions after a reactor scram, to control necessary control equipments to bring a reactor to a hot stand-by condition automatically, and to energize a decay heat removal system. The performance evaluation on this system was carried out by comparing the results using to Nuclear Ship Engineering Simulation System (NESSY) and the those measured in the scram test of the nuclear ship `Mutsu`. As the result, it was showed that this system had the sufficient performance to bring a reactor to a hot syand-by condition quickly and safety. (author)

Evaluation of manual and automatic manually triggered ventilation performance and ergonomics using a simulation model.

Science.gov (United States)

Marjanovic, Nicolas; Le Floch, Soizig; Jaffrelot, Morgan; L'Her, Erwan

2014-05-01

In the absence of endotracheal intubation, the manual bag-valve-mask (BVM) is the most frequently used ventilation technique during resuscitation. The efficiency of other devices has been poorly studied. The bench-test study described here was designed to evaluate the effectiveness of an automatic, manually triggered system, and to compare it with manual BVM ventilation. A respiratory system bench model was assembled using a lung simulator connected to a manikin to simulate a patient with unprotected airways. Fifty health-care providers from different professional groups (emergency physicians, residents, advanced paramedics, nurses, and paramedics; n = 10 per group) evaluated manual BVM ventilation, and compared it with an automatic manually triggered device (EasyCPR). Three pathological situations were simulated (restrictive, obstructive, normal). Standard ventilation parameters were recorded; the ergonomics of the system were assessed by the health-care professionals using a standard numerical scale once the recordings were completed. The tidal volume fell within the standard range (400-600 mL) for 25.6% of breaths (0.6-45 breaths) using manual BVM ventilation, and for 28.6% of breaths (0.3-80 breaths) using the automatic manually triggered device (EasyCPR) (P < .0002). Peak inspiratory airway pressure was lower using the automatic manually triggered device (EasyCPR) (10.6 ± 5 vs 15.9 ± 10 cm H2O, P < .001). The ventilation rate fell consistently within the guidelines, in the case of the automatic manually triggered device (EasyCPR) only (10.3 ± 2 vs 17.6 ± 6, P < .001). Significant pulmonary overdistention was observed when using the manual BVM device during the normal and obstructive sequences. The nurses and paramedics considered the ergonomics of the automatic manually triggered device (EasyCPR) to be better than those of the manual device. The use of an automatic manually triggered device may improve ventilation efficiency and decrease the risk of

Fast freezing of cow embryos in French straws with an automatic program.

Science.gov (United States)

Massip, A; Van der Zwalmen, P; Hanzen, C; Ectors, F

1982-09-01

Cow embryos between day 6.5 and 9 were frozen in 1.5M DMSO in PBS at 2 degrees C/min from seeding to -25 degrees C before being plunged into liquid nitrogen directly or after 10 min at -25 degrees C. Cooling rate from 20 degrees C to -5 degrees C was 9 degrees C/min. Seeding was induced automatically at -5 degrees C by injection of liquid nitrogen vapour. Embryos were subsequently thawed by direct transfer to water at 20 degrees C (group I) or at 37 degrees C (group II). Survival was assessed by culture in vitro and by transfer. In group I, 35.7% were degenerated after thawing (compared to 35.4% in group II). Survival rate after culture in vitro for 24h was not significantly different (48.3% vs 42.8%) and hatching rate after 96h culture was quite similar (33.3% vs 34.4%). In group II, four pregnancies were obtained from 10 embryos transferred. Time at -25 degrees C did not improve the results. Automatic seeding did not impair survival. These results show that the quality of the embryo is the determinant factor for survival after freezing and that the plastic straw is the most suitable vessel for freezing, storage and transfer of embryos.

Automatic exchange unit for control rod drive device

International Nuclear Information System (INIS)

Nasu, Seiji; Sasaki, Masayoshi.

1982-01-01

Purpose: To enable automatic reoperation and continuation without external power interruption remedy device at the time of recovering the interrupted power soruce during automatic positioning operation. Constitution: In case of an automatic exchange unit for a control rod drive device of the control type for setting the deviation between the positioning target position and the present position of the device to zero, the position data of the drive device of the positioning target value of the device is automatically read, and an interlock of operation inhibit is applied to a control system until the data reading is completed and automatic operation start or restart conditions are sequentially confirmed. After the confirmation, the interlock is released to start the automatic operation or reoperation. Accordingly, the automatic operation can be safely restarted and continued. (Yoshihara, H.)

Study on Classification Accuracy Inspection of Land Cover Data Aided by Automatic Image Change Detection Technology

Science.gov (United States)

Xie, W.-J.; Zhang, L.; Chen, H.-P.; Zhou, J.; Mao, W.-J.

2018-04-01

The purpose of carrying out national geographic conditions monitoring is to obtain information of surface changes caused by human social and economic activities, so that the geographic information can be used to offer better services for the government, enterprise and public. Land cover data contains detailed geographic conditions information, thus has been listed as one of the important achievements in the national geographic conditions monitoring project. At present, the main issue of the production of the land cover data is about how to improve the classification accuracy. For the land cover data quality inspection and acceptance, classification accuracy is also an important check point. So far, the classification accuracy inspection is mainly based on human-computer interaction or manual inspection in the project, which are time consuming and laborious. By harnessing the automatic high-resolution remote sensing image change detection technology based on the ERDAS IMAGINE platform, this paper carried out the classification accuracy inspection test of land cover data in the project, and presented a corresponding technical route, which includes data pre-processing, change detection, result output and information extraction. The result of the quality inspection test shows the effectiveness of the technical route, which can meet the inspection needs for the two typical errors, that is, missing and incorrect update error, and effectively reduces the work intensity of human-computer interaction inspection for quality inspectors, and also provides a technical reference for the data production and quality control of the land cover data.

Online Questionnaires Use with Automatic Feedback for e-Innovation in University Students

OpenAIRE

Remesal, Ana; Colomina, Rosa M.; Mauri, Teresa; Rochera, M. José

2017-01-01

Technological tools have permeated higher education programs. However, their mere introduction does not guarantee instructional quality. This article presents the results of an innovation project aimed at fostering autonomous learning among students at a Pre-School and Primary Teacher Grade. For one semester all freshmen students used a system for autonomous learning embedded in the institutional online platform (Moodle), which included automatic formative feedback. The system was part of a c...

Intact Automatic Imitation and Typical Spatial Compatibility in Autism Spectrum Disorder: Challenging the Broken Mirror Theory.

Science.gov (United States)

Sowden, Sophie; Koehne, Svenja; Catmur, Caroline; Dziobek, Isabel; Bird, Geoffrey

2016-02-01

A lack of imitative behavior is frequently described as a core feature of Autism Spectrum Disorder (ASD), and is consistent with claims of mirror neuron system dysfunction in these individuals. Previous research has questioned this characterization of ASD however, arguing that when tests of automatic imitation are used--which do not require higher-level cognitive processing--imitative behavior is intact or even enhanced in individuals with ASD. In Experiment 1, 60 adult individuals with ASD and a matched Control group completed an automatic imitation task in which they were required to perform an index or a middle finger lift while observing a hand making either the same, or the alternate, finger movement. Both groups demonstrated a significant imitation effect whereby actions were executed faster when preceded by observation of the same action, than when preceded by the alternate action. The magnitude of this "imitation effect" was statistically indistinguishable in the ASD and Control groups. Experiment 2 utilized an improved automatic imitation paradigm to demonstrate that, when automatic imitation effects are isolated from those due to spatial compatibility, increasing autism symptom severity is associated with an increased tendency to imitate. Notably, there was no association between autism symptom severity and spatial compatibility, demonstrating the specificity of the link between ASD symptoms and increased imitation. These results provide evidence against claims of a lack of imitative behavior in ASD, and challenge the "Broken Mirror Theory of Autism." © 2015 International Society for Autism Research, Wiley Periodicals, Inc.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

Science.gov (United States)

1999-01-01

Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

The research of full automatic oil filtering control technology of high voltage insulating oil

Science.gov (United States)

Gong, Gangjun; Zhang, Tong; Yan, Guozeng; Zhang, Han; Chen, Zhimin; Su, Chang

2017-09-01

In this paper, the design scheme of automatic oil filter control system for transformer oil in UHV substation is summarized. The scheme specifically includes the typical double tank filter connection control method of the transformer oil of the UHV substation, which distinguishes the single port and the double port connection structure of the oil tank. Finally, the design scheme of the temperature sensor and respirator is given in detail, and the detailed evaluation and application scenarios are given for reference.

A neurocomputational model of automatic sequence production.

Science.gov (United States)

Helie, Sebastien; Roeder, Jessica L; Vucovich, Lauren; Rünger, Dennis; Ashby, F Gregory

2015-07-01

Most behaviors unfold in time and include a sequence of submovements or cognitive activities. In addition, most behaviors are automatic and repeated daily throughout life. Yet, relatively little is known about the neurobiology of automatic sequence production. Past research suggests a gradual transfer from the associative striatum to the sensorimotor striatum, but a number of more recent studies challenge this role of the BG in automatic sequence production. In this article, we propose a new neurocomputational model of automatic sequence production in which the main role of the BG is to train cortical-cortical connections within the premotor areas that are responsible for automatic sequence production. The new model is used to simulate four different data sets from human and nonhuman animals, including (1) behavioral data (e.g., RTs), (2) electrophysiology data (e.g., single-neuron recordings), (3) macrostructure data (e.g., TMS), and (4) neurological circuit data (e.g., inactivation studies). We conclude with a comparison of the new model with existing models of automatic sequence production and discuss a possible new role for the BG in automaticity and its implication for Parkinson's disease.

Automatic ultrasound image enhancement for 2D semi-automatic breast-lesion segmentation

Science.gov (United States)

Lu, Kongkuo; Hall, Christopher S.

2014-03-01

Breast cancer is the fastest growing cancer, accounting for 29%, of new cases in 2012, and second leading cause of cancer death among women in the United States and worldwide. Ultrasound (US) has been used as an indispensable tool for breast cancer detection/diagnosis and treatment. In computer-aided assistance, lesion segmentation is a preliminary but vital step, but the task is quite challenging in US images, due to imaging artifacts that complicate detection and measurement of the suspect lesions. The lesions usually present with poor boundary features and vary significantly in size, shape, and intensity distribution between cases. Automatic methods are highly application dependent while manual tracing methods are extremely time consuming and have a great deal of intra- and inter- observer variability. Semi-automatic approaches are designed to counterbalance the advantage and drawbacks of the automatic and manual methods. However, considerable user interaction might be necessary to ensure reasonable segmentation for a wide range of lesions. This work proposes an automatic enhancement approach to improve the boundary searching ability of the live wire method to reduce necessary user interaction while keeping the segmentation performance. Based on the results of segmentation of 50 2D breast lesions in US images, less user interaction is required to achieve desired accuracy, i.e. < 80%, when auto-enhancement is applied for live-wire segmentation.

Accelerator technology working group summary

International Nuclear Information System (INIS)

Jameson, R.A.

1985-01-01

A summary is presented of workshop deliberations on basic scaling, the economic viability of laser drive power for HEP accelerators, the availability of electron beam injectors for near-term experiments, and a few very general remarks on technology issues

EFFECTIVENESS OF MINDFULNESS BASED COGNITIVE THERAPY ON REDUCTION OF NEGATIVE AUTOMATIC THOUGHTS OF DEPRESSIVE PATIENTS

OpenAIRE

Farokhzad, Pegah; Yazdanfar, Tahmineh

2018-01-01

AbstractThe present research is aimed to study the effectiveness of mindfulness based cognitive therapy on reduction of negative automatic thoughts of depressive patients. It was a semi-experimental research, using pre-test post-test with control group design. The statistical population consists of 20-40 year old patients who were referred to Tehran Psychiatric Institute for depression in 2015. Out of them, on the basis of Cohen’s table, 30 patients who had negative automatic thoughts were sc...

Programmable automatic alpha--beta air sample counter

International Nuclear Information System (INIS)

Howell, W.P.

1978-01-01

A programmable automatic alpha-beta air sample counter was developed for routine sample counting by operational health physics personnel. The system is composed of an automatic sample changer utilizing a large silicon diode detector, an electronic counting system with energy analysis capability, an automatic data acquisition controller, an interface module, and a teletypewriter with paper tape punch and paper tape reader. The system is operated through the teletypewriter keyboard and the paper tape reader, which are used to instruct the automatic data acquisition controller. Paper tape programs are provided for background counting, Chi 2 test, and sample counting. Output data are printed by the teletypewriter on standard continuous roll or multifold paper. Data are automatically corrected for background and counter efficiency

Recent developments in smart freezing technology applied to fresh foods.

Science.gov (United States)

Xu, Ji-Cheng; Zhang, Min; Mujumdar, Arun S; Adhikari, Benu

2017-09-02

Due to the increased awareness of consumers in sensorial and nutritional quality of frozen foods, the freezing technology has to seek new and innovative technologies for better retaining the fresh like quality of foods. In this article, we review the recent developments in smart freezing technology applied to fresh foods. The application of these intelligent technologies and the associated underpinning concepts have greatly improved the quality of frozen foods and the freezing efficiency. These technologies are able to automatically collect the information in-line during freezing and help control the freezing process better. Smart freezing technology includes new and intelligent technologies and concepts applied to the pretreatment of the frozen product, freezing processes, cold chain logistics as well as warehouse management. These technologies enable real-time monitoring of quality during the freezing process and help improve product quality and freezing efficiency. We also provide a brief overview of several sensing technologies used to achieve automatic control of individual steps of freezing process. These sensing technologies include computer vision, electronic nose, electronic tongue, digital simulation, confocal laser, near infrared spectroscopy, nuclear magnetic resonance technology and ultrasound. Understanding of the mechanism of these new technologies will be helpful for applying them to improve the quality of frozen foods.

Technologies in computerized lexicography | Kruyt | Lexikos

African Journals Online (AJOL)

Although the topic of this paper is technology, focus is on functional rather than technical aspects of computerized lexicography. Keywords: computerized lexicography, electronic dictionary, electronic text corpus, lexicographer's workbench, integrated language database, automatic linguistic analysis, information retrieval, ...

Robot-assisted automatic ultrasound calibration.

Science.gov (United States)

Aalamifar, Fereshteh; Cheng, Alexis; Kim, Younsu; Hu, Xiao; Zhang, Haichong K; Guo, Xiaoyu; Boctor, Emad M

2016-10-01

Ultrasound (US) calibration is the process of determining the unknown transformation from a coordinate frame such as the robot's tooltip to the US image frame and is a necessary task for any robotic or tracked US system. US calibration requires submillimeter-range accuracy for most applications, but it is a time-consuming and repetitive task. We provide a new framework for automatic US calibration with robot assistance and without the need for temporal calibration. US calibration based on active echo (AE) phantom was previously proposed, and its superiority over conventional cross-wire phantom-based calibration was shown. In this work, we use AE to guide the robotic arm motion through the process of data collection; we combine the capability of the AE point to localize itself in the frame of the US image with the automatic motion of the robotic arm to provide a framework for calibrating the arm to the US image automatically. We demonstrated the efficacy of the automated method compared to the manual method through experiments. To highlight the necessity of frequent ultrasound calibration, it is demonstrated that the calibration precision changed from 1.67 to 3.20 mm if the data collection is not repeated after a dismounting/mounting of the probe holder. In a large data set experiment, similar reconstruction precision of automatic and manual data collection was observed, while the time was reduced by 58 %. In addition, we compared ten automatic calibrations with ten manual ones, each performed in 15 min, and showed that all the automatic ones could converge in the case of setting the initial matrix as identity, while this was not achieved by manual data sets. Given the same initial matrix, the repeatability of the automatic was [0.46, 0.34, 0.80, 0.47] versus [0.42, 0.51, 0.98, 1.15] mm in the manual case for the US image four corners. The submillimeter accuracy requirement of US calibration makes frequent data collections unavoidable. We proposed an automated

A Plane Target Detection Algorithm in Remote Sensing Images based on Deep Learning Network Technology

Science.gov (United States)

Shuxin, Li; Zhilong, Zhang; Biao, Li

2018-01-01

Plane is an important target category in remote sensing targets and it is of great value to detect the plane targets automatically. As remote imaging technology developing continuously, the resolution of the remote sensing image has been very high and we can get more detailed information for detecting the remote sensing targets automatically. Deep learning network technology is the most advanced technology in image target detection and recognition, which provided great performance improvement in the field of target detection and recognition in the everyday scenes. We combined the technology with the application in the remote sensing target detection and proposed an algorithm with end to end deep network, which can learn from the remote sensing images to detect the targets in the new images automatically and robustly. Our experiments shows that the algorithm can capture the feature information of the plane target and has better performance in target detection with the old methods.

A new type industrial total station based on target automatic collimation

Science.gov (United States)

Lao, Dabao; Zhou, Weihu; Ji, Rongyi; Dong, Dengfeng; Xiong, Zhi; Wei, Jiang

2018-01-01

In the case of industrial field measurement, the present measuring instruments work with manual operation and collimation, which give rise to low efficiency for field measurement. In order to solve the problem, a new type industrial total station is presented in this paper. The new instrument can identify and trace cooperative target automatically, in the mean time, coordinate of the target is measured in real time. For realizing the system, key technology including high precision absolutely distance measurement, small high accuracy angle measurement, target automatic collimation with vision, and quick precise controlling should be worked out. After customized system assemblage and adjustment, the new type industrial total station will be established. As the experiments demonstrated, the coordinate accuracy of the instrument is under 15ppm in the distance of 60m, which proved that the measuring system is feasible. The result showed that the total station can satisfy most industrial field measurement requirements.

The development of structures and the prospects of automatic transmissions

Directory of Open Access Journals (Sweden)

O. I. Girutskiy

2014-01-01

Full Text Available At the present stage development of transport technology has a rapid change of production models along with intensification of modification processes of vehicles, increasing number of new developments thereby providing vehicles with higher consumer qualities and competitiveness at the markets. Automation control of car transmissions is an important task. It raises the life of the engine and transmission, increased permeability and comfort due to a smoother change of torque to the drive wheels, driving off, and acceleration, etc.The article analyzes the promising schemes rotary shaft and planetary gearboxes of leading companies in the world automotive industry, the advantages of automated transmissions. It offers the prospects of creating the control systems of transmissions based on artificial intelligence methods.To design modern vehicles equipped with automatically controlled fluid transmission is a challenge. It requires various technologies to be applied using new technical solutions and scientific principles. An analysis to solve the problem of automation control of various technical objects shows that the classical theory of automatic control does not allow taking into account the diversity of vehicles operating conditions. In this regard, the effectiveness of the systems based on its scientific principles becomes often lower than expected.Implementation of modern design technology is based on a number of scientific and philosophical principles. The most important and most common of them is the principle of hierarchy, which means to structure representations of objects by degree of detailed descriptions and the principle of decomposition (blocking, which means to decompose representations of each level on the number of components (blocks with the possibility for the separate (sub-block designing.In order to create a design of control systems for the cars and synthesize its control algorithms within the framework of the developed concept

Automatically sweeping dual-channel boxcar integrator

International Nuclear Information System (INIS)

Keefe, D.J.; Patterson, D.R.

1978-01-01

An automatically sweeping dual-channel boxcar integrator has been developed to automate the search for a signal that repeatedly follows a trigger pulse by a constant or slowly varying time delay when that signal is completely hidden in random electrical noise and dc-offset drifts. The automatically sweeping dual-channel boxcar integrator improves the signal-to-noise ratio and eliminates dc-drift errors in the same way that a conventional dual-channel boxcar integrator does, but, in addition, automatically locates the hidden signal. When the signal is found, its time delay is displayed with 100-ns resolution, and its peak value is automatically measured and displayed. This relieves the operator of the tedious, time-consuming, and error-prone search for the signal whenever the time delay changes. The automatically sweeping boxcar integrator can also be used as a conventional dual-channel boxcar integrator. In either mode, it can repeatedly integrate a signal up to 990 times and thus make accurate measurements of the signal pulse height in the presence of random noise, dc offsets, and unsynchronized interfering signals

New technology for BWR power plant control and instrumentation

International Nuclear Information System (INIS)

Takano, Yoshiyuki; Nakamura, Makoto; Murata, Fumio.

1992-01-01

Nuclear power plants are facing strong demands for higher reliability and cost-performance in their control and instrumentation systems. To meet these needs, Hitachi is developing advanced control and instrumentation technology by rationalizing the conventional technology in that field. The rationalization is done through the utilization of reliable digital technology and optical transmission technology, and others, which are now commonly used in computer applications. The goal of the development work is to ensure safe, stable operation of the plant facilities and to secure harmony between man and machine. To alleviate the burdens of the operators, the latest electronic devices are being employed to create an advanced man-machine interface, and to promote automatic operation of the plant based upon the automatic operation of individual systems. In addition, the control and instrumentation system, including the safety system, incorporates more and more digital components in order to further enhance the reliability and maintainability of the plant. (author)

Automatic Recognition Method for Optical Measuring Instruments Based on Machine Vision

Institute of Scientific and Technical Information of China (English)

SONG Le; LIN Yuchi; HAO Liguo

2008-01-01

Based on a comprehensive study of various algorithms, the automatic recognition of traditional ocular optical measuring instruments is realized. Taking a universal tools microscope (UTM) lens view image as an example, a 2-layer automatic recognition model for data reading is established after adopting a series of pre-processing algorithms. This model is an optimal combination of the correlation-based template matching method and a concurrent back propagation (BP) neural network. Multiple complementary feature extraction is used in generating the eigenvectors of the concurrent network. In order to improve fault-tolerance capacity, rotation invariant features based on Zernike moments are extracted from digit characters and a 4-dimensional group of the outline features is also obtained. Moreover, the operating time and reading accuracy can be adjusted dynamically by setting the threshold value. The experimental result indicates that the newly developed algorithm has optimal recognition precision and working speed. The average reading ratio can achieve 97.23%. The recognition method can automatically obtain the results of optical measuring instruments rapidly and stably without modifying their original structure, which meets the application requirements.

What Automaticity Deficit? Activation of Lexical Information by Readers with Dyslexia in a Rapid Automatized Naming Stroop-Switch Task

Science.gov (United States)

Jones, Manon W.; Snowling, Margaret J.; Moll, Kristina

2016-01-01

Reading fluency is often predicted by rapid automatized naming (RAN) speed, which as the name implies, measures the automaticity with which familiar stimuli (e.g., letters) can be retrieved and named. Readers with dyslexia are considered to have less "automatized" access to lexical information, reflected in longer RAN times compared with…

Automatic Evaluation of Practices in Moodle for Self Learning in Engineering

Science.gov (United States)

Sánchez, Carles; Ramos, Oriol; Márquez, Patricia; Marti, Enric; Rocarias, Jaume; Gil, Debora

2015-01-01

The first years in engineering degree courses are usually made of large groups with a low teacher-student ratio. Overcrowding in classrooms hinders continuous assessment much needed to promote independent learning. Therefore, there is a need to apply some kind of automatic evaluation to facilitate the correction of exercises outside the classroom.…

4 years of successful knowledge transfer - the nuclear technology training center of the TUeV Nord Group

International Nuclear Information System (INIS)

Willenbockel, I.; Tietze, U.

2007-01-01

In connection with the 2002 amendment to the German Atomic Energy Act, the topics of generational change and maintenance of competence grew in importance and necessitated new solution approaches. To this end, various activities were launched, with the aim of conducting conceptual analyses of these topics. Examples include the 'National Competence Network for Nuclear Technology' (Nationaler Kompetenzverbund fuer Kerntechnik), various networks established by colleges and universities, the 'Knowledge Management for the Maintenance and Transfer of Competence in Reactor Safety' (Wissensmanagement zum Kompetenzerhalt und -transfer in der Reaktorsicherheit) workshop held in 2001 in Garching near Munich (Germany) and the 'Ad-hoc Workgroup on the Maintenance of Competence' (Ad-hoc-Arbeitskreis Kompetenzerhalt) of the VdTUeV. The nuclear technology departments of the TUeV Nord Group were aware of te challenges associated with the generational change early on. By establishing the 'Nuclear Technology Training Center' (Ausbildungszentrum fuer Kerntechnik, AfK), the TUeV Nord Group intended to ensure the required knowledge transfer during the generational change as well as maintain the renowned high qualification as regards the subject of nuclear technology and thus continue to provide - in the sense of social responsibility - crucial contribution to the long-term safety of nuclear plants. Four years have passed since the training center held the first courses in the fall of 2002. Up to now, more than 350 participants have been trained in the courses conducted by the AfK. In the opinion of the TUeV Nord Group, the activities of the AfK have laid the foundation for a successful change of generations within the group's nuclear technology organizations. (orig.)

14 CFR 29.1329 - Automatic pilot system.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Automatic pilot system. 29.1329 Section 29... pilot system. (a) Each automatic pilot system must be designed so that the automatic pilot can— (1) Be sufficiently overpowered by one pilot to allow control of the rotorcraft; and (2) Be readily and positively...

14 CFR 27.1329 - Automatic pilot system.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Automatic pilot system. 27.1329 Section 27... pilot system. (a) Each automatic pilot system must be designed so that the automatic pilot can— (1) Be sufficiently overpowered by one pilot to allow control of the rotorcraft; and (2) Be readily and positively...

Realizing parameterless automatic classification of remote sensing imagery using ontology engineering and cyberinfrastructure techniques

Science.gov (United States)

Sun, Ziheng; Fang, Hui; Di, Liping; Yue, Peng

2016-09-01

It was an untouchable dream for remote sensing experts to realize total automatic image classification without inputting any parameter values. Experts usually spend hours and hours on tuning the input parameters of classification algorithms in order to obtain the best results. With the rapid development of knowledge engineering and cyberinfrastructure, a lot of data processing and knowledge reasoning capabilities become online accessible, shareable and interoperable. Based on these recent improvements, this paper presents an idea of parameterless automatic classification which only requires an image and automatically outputs a labeled vector. No parameters and operations are needed from endpoint consumers. An approach is proposed to realize the idea. It adopts an ontology database to store the experiences of tuning values for classifiers. A sample database is used to record training samples of image segments. Geoprocessing Web services are used as functionality blocks to finish basic classification steps. Workflow technology is involved to turn the overall image classification into a total automatic process. A Web-based prototypical system named PACS (Parameterless Automatic Classification System) is implemented. A number of images are fed into the system for evaluation purposes. The results show that the approach could automatically classify remote sensing images and have a fairly good average accuracy. It is indicated that the classified results will be more accurate if the two databases have higher quality. Once the experiences and samples in the databases are accumulated as many as an expert has, the approach should be able to get the results with similar quality to that a human expert can get. Since the approach is total automatic and parameterless, it can not only relieve remote sensing workers from the heavy and time-consuming parameter tuning work, but also significantly shorten the waiting time for consumers and facilitate them to engage in image

Automatic differentiation algorithms in model analysis

NARCIS (Netherlands)

Huiskes, M.J.

2002-01-01

Title: Automatic differentiation algorithms in model analysis
Author: M.J. Huiskes
Date: 19 March, 2002

In this thesis automatic differentiation algorithms and derivative-based methods

Automatic Bolus Tracking Versus Fixed Time-Delay Technique in Biphasic Multidetector Computed Tomography of the Abdomen

International Nuclear Information System (INIS)

Adibi, Atoosa; Shahbazi, Ali

2014-01-01

Bolus tracking can individualize time delay for the start of scans in spiral computed tomography (CT). We compared automatic bolus tracking method with fixed time-delay technique in biphasic contrast enhancement during multidetector CT of abdomen. Adult patients referred for spiral CT of the abdomen were randomized into two groups; in group 1, the arterial and portal phases of spiral scans were started 25 s and 55 s after the start of contrast material administration; in group 2, using the automatic bolus tracking software, repetitive monitoring scans were performed within the lumen of the descending aorta as the region of interest with the threshold of starting the diagnostic scans as 60 HU. The contrast enhancement of the aorta, liver, and spleen were compared between the groups. Forty-eight patients (23 males, 25 females, mean age=56.4±13.5 years) were included. The contrast enhancement of the aorta, liver, and spleen at the arterial phase was similar between the two groups (P>0.05). Regarding the portal phase, the aorta and spleen were more enhanced in the bolus-tracking group (P<0.001). The bolus tracking provided more homogeneous contrast enhancement among different patients than the fixed time-delay technique in the liver at portal phase, but not at the arterial phase. The automatic bolus-tracking method, results in higher contrast enhancement of the aorta and spleen at the portal phase, but has no effect on liver enhancement. However, bolus tracking is associated with reduced variability for liver enhancement among different patients

Clinical performance of a new hepatitis B surface antigen quantitative assay with automatic dilution

Directory of Open Access Journals (Sweden)

Ta-Wei Liu

2015-01-01

Full Text Available Hepatitis B virus surface antigen (HBsAg levels reflect disease status and can predict the clinical response to antiviral treatment; however, the emergence of HBsAg mutant strains has become a challenge. The Abbott HBsAg quantification assay provides enhanced detection of HBsAg and HBsAg mutants. We aimed to evaluate the performance of the Abbott HBsAg quantification assay with automatic sample dilutions (shortened as automatic Architect assay, compared with the Abbott HBsAg quantification assay with manual sample dilutions (shortened as manual Architect assay and the Roche HBsAg quantification assay with automatic sample dilutions (shortened as Elecsys. A total of 130 sera samples obtained from 87 hepatitis B virus (HBV-infected patients were collected to assess the correlation between the automatic and manual Architect assays. Among the 87 patients, 41 provided 42 sera samples to confirm the linearity and reproducibility of the automatic Architect assay, and find out the correlation among the Elecsys and two Architect assays. The coefficients of variation (0.44–9.53% and R2 = 0.996–1, which were both determined using values obtained from the automatic Architect assay, showed good reproducibility and linearity. Results of the two Architect assays demonstrated a feasible correlation (n = 130 samples; R = 0.898, p  0.93 in all cases. In conclusion, the correlation between the automatic and manual dilution Architect assays was feasible, particularly in the HBeAg-negative and low DNA groups. With lower labor costs and less human error than the manual version, the Abbott automatic dilution Architect assay provided a good clinical performance with regard to the HBsAg levels.

[Integrated Development of Full-automatic Fluorescence Analyzer].

Science.gov (United States)

Zhang, Mei; Lin, Zhibo; Yuan, Peng; Yao, Zhifeng; Hu, Yueming

2015-10-01

In view of the fact that medical inspection equipment sold in the domestic market is mainly imported from abroad and very expensive, we developed a full-automatic fluorescence analyzer in our center, presented in this paper. The present paper introduces the hardware architecture design of FPGA/DSP motion controlling card+PC+ STM32 embedded micro processing unit, software system based on C# multi thread, design and implementation of double-unit communication in detail. By simplifying the hardware structure, selecting hardware legitimately and adopting control system software to object-oriented technology, we have improved the precision and velocity of the control system significantly. Finally, the performance test showed that the control system could meet the needs of automated fluorescence analyzer on the functionality, performance and cost.

An automatic tuning method of a fuzzy logic controller for nuclear reactors

International Nuclear Information System (INIS)

Ramaswamy, P.; Lee, K.Y.; Edwards, R.M.

1993-01-01

The design and evaluation by simulation of an automatically tuned fuzzy logic controller is presented. Typically, fuzzy logic controllers are designed based on an expert's knowledge of the process. However, this approach has its limitations in the fact that the controller is hard to optimize or tune to get the desired control action. A method to automate the tuning process using a simplified Kalman filter approach is presented for the fuzzy logic controller to track a suitable reference trajectory. Here, for purposes of illustration an optimal controller's response is used as a reference trajectory to determine automatically the rules for the fuzzy logic controller. To demonstrate the robustness of this design approach, a nonlinear six-delayed neutron group plant is controlled using a fuzzy logic controller that utilizes estimated reactor temperatures from a one-delayed neutron group observer. The fuzzy logic controller displayed good stability and performance robustness characteristics for a wide range of operation

Automatic detection of adverse events to predict drug label changes using text and data mining techniques.

Science.gov (United States)

Gurulingappa, Harsha; Toldo, Luca; Rajput, Abdul Mateen; Kors, Jan A; Taweel, Adel; Tayrouz, Yorki

2013-11-01

The aim of this study was to assess the impact of automatically detected adverse event signals from text and open-source data on the prediction of drug label changes. Open-source adverse effect data were collected from FAERS, Yellow Cards and SIDER databases. A shallow linguistic relation extraction system (JSRE) was applied for extraction of adverse effects from MEDLINE case reports. Statistical approach was applied on the extracted datasets for signal detection and subsequent prediction of label changes issued for 29 drugs by the UK Regulatory Authority in 2009. 76% of drug label changes were automatically predicted. Out of these, 6% of drug label changes were detected only by text mining. JSRE enabled precise identification of four adverse drug events from MEDLINE that were undetectable otherwise. Changes in drug labels can be predicted automatically using data and text mining techniques. Text mining technology is mature and well-placed to support the pharmacovigilance tasks. Copyright © 2013 John Wiley & Sons, Ltd.

Automatic intelligent cruise control

OpenAIRE

Stanton, NA; Young, MS

2006-01-01

This paper reports a study on the evaluation of automatic intelligent cruise control (AICC) from a psychological perspective. It was anticipated that AICC would have an effect upon the psychology of driving—namely, make the driver feel like they have less control, reduce the level of trust in the vehicle, make drivers less situationally aware, but might reduce the workload and make driving might less stressful. Drivers were asked to drive in a driving simulator under manual and automatic inte...

Group theory and lattice gauge fields

International Nuclear Information System (INIS)

Creutz, M.

1988-09-01

Lattice gauge theory, formulated in terms of invariant integrals over group elements on lattice bonds, benefits from many group theoretical notions. Gauge invariance provides an enormous symmetry and powerful constraints on expectation values. Strong coupling expansions require invariant integrals over polynomials in group elements, all of which can be evaluated by symmetry considerations. Numerical simulations involve random walks over the group. These walks automatically generate the invariant group measure, avoiding explicit parameterization. A recently proposed overrelaxation algorithm is particularly efficient at exploring the group manifold. These and other applications of group theory to lattice gauge fields are reviewed in this talk. 17 refs

Attentional Bias for Pain and Sex, and Automatic Appraisals of Sexual Penetration: Differential Patterns in Dyspareunia vs Vaginismus?

Science.gov (United States)

Melles, Reinhilde J; Dewitte, Marieke D; Ter Kuile, Moniek M; Peters, Madelon M L; de Jong, Peter J

2016-08-01

Current information processing models propose that heightened attention bias for sex-related threats (eg, pain) and lowered automatic incentive processes ("wanting") may play an important role in the impairment of sexual arousal and the development of sexual dysfunctions such as genitopelvic pain/penetration disorder (GPPPD). Differential threat and incentive processing may also help explain the stronger persistence of coital avoidance in women with vaginismus compared to women with dyspareunia. As the first aim, we tested if women with GPPPD show (1) heightened attention for pain and sex, and (2) heightened threat and lower incentive associations with sexual penetration. Second, we examined whether the stronger persistence of coital avoidance in vaginismus vs dyspareunia might be explained by a stronger attentional bias or more dysfunctional automatic threat/incentive associations. Women with lifelong vaginismus (n = 37), dyspareunia (n = 29), and a no-symptoms comparison group (n = 51) completed a visual search task to assess attentional bias, and single target implicit-association tests to measure automatic sex-threat and sex-wanting associations. There were no group differences in attentional bias or automatic associations. Correlational analysis showed that slowed detection of sex stimuli and stronger automatic threat associations were related to lowered sexual arousal. The findings do not corroborate the view that attentional bias for pain or sex contributes to coital pain, or that differences in coital avoidance may be explained by differences in attentional bias or automatic threat/incentive associations. However, the correlational findings are consistent with the view that automatic threat associations and impaired attention for sex stimuli may interfere with the generation of sexual arousal. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Automatic Frequency Controller for Power Amplifiers Used in Bio-Implanted Applications: Issues and Challenges

Directory of Open Access Journals (Sweden)

Mahammad A. Hannan

2014-12-01

Full Text Available With the development of communication technologies, the use of wireless systems in biomedical implanted devices has become very useful. Bio-implantable devices are electronic devices which are used for treatment and monitoring brain implants, pacemakers, cochlear implants, retinal implants and so on. The inductive coupling link is used to transmit power and data between the primary and secondary sides of the biomedical implanted system, in which efficient power amplifier is very much needed to ensure the best data transmission rates and low power losses. However, the efficiency of the implanted devices depends on the circuit design, controller, load variation, changes of radio frequency coil’s mutual displacement and coupling coefficients. This paper provides a comprehensive survey on various power amplifier classes and their characteristics, efficiency and controller techniques that have been used in bio-implants. The automatic frequency controller used in biomedical implants such as gate drive switching control, closed loop power control, voltage controlled oscillator, capacitor control and microcontroller frequency control have been explained. Most of these techniques keep the resonance frequency stable in transcutaneous power transfer between the external coil and the coil implanted inside the body. Detailed information including carrier frequency, power efficiency, coils displacement, power consumption, supplied voltage and CMOS chip for the controllers techniques are investigated and summarized in the provided tables. From the rigorous review, it is observed that the existing automatic frequency controller technologies are more or less can capable of performing well in the implant devices; however, the systems are still not up to the mark. Accordingly, current challenges and problems of the typical automatic frequency controller techniques for power amplifiers are illustrated, with a brief suggestions and discussion section concerning

Automatic Frequency Controller for Power Amplifiers Used in Bio-Implanted Applications: Issues and Challenges

Science.gov (United States)

Hannan, Mahammad A.; Hussein, Hussein A.; Mutashar, Saad; Samad, Salina A.; Hussain, Aini

2014-01-01

With the development of communication technologies, the use of wireless systems in biomedical implanted devices has become very useful. Bio-implantable devices are electronic devices which are used for treatment and monitoring brain implants, pacemakers, cochlear implants, retinal implants and so on. The inductive coupling link is used to transmit power and data between the primary and secondary sides of the biomedical implanted system, in which efficient power amplifier is very much needed to ensure the best data transmission rates and low power losses. However, the efficiency of the implanted devices depends on the circuit design, controller, load variation, changes of radio frequency coil's mutual displacement and coupling coefficients. This paper provides a comprehensive survey on various power amplifier classes and their characteristics, efficiency and controller techniques that have been used in bio-implants. The automatic frequency controller used in biomedical implants such as gate drive switching control, closed loop power control, voltage controlled oscillator, capacitor control and microcontroller frequency control have been explained. Most of these techniques keep the resonance frequency stable in transcutaneous power transfer between the external coil and the coil implanted inside the body. Detailed information including carrier frequency, power efficiency, coils displacement, power consumption, supplied voltage and CMOS chip for the controllers techniques are investigated and summarized in the provided tables. From the rigorous review, it is observed that the existing automatic frequency controller technologies are more or less can capable of performing well in the implant devices; however, the systems are still not up to the mark. Accordingly, current challenges and problems of the typical automatic frequency controller techniques for power amplifiers are illustrated, with a brief suggestions and discussion section concerning the progress of

Automatic radioxenon analyzer for CTBT monitoring

International Nuclear Information System (INIS)

Bowyer, T.W.; Abel, K.H.; Hensley, W.K.

1996-12-01

Over the past 3 years, with support from US DOE's NN-20 Comprehensive Test Ban Treaty (CTBT) R ampersand D program, PNNL has developed and demonstrated a fully automatic analyzer for collecting and measuring the four Xe radionuclides, 131m Xe(11.9 d), 133m Xe(2.19 d), 133 Xe (5.24 d), and 135 Xe(9.10 h), in the atmosphere. These radionuclides are important signatures in monitoring for compliance to a CTBT. Activity ratios permit discriminating radioxenon from nuclear detonation and that from nuclear reactor operations, nuclear fuel reprocessing, or medical isotope production and usage. In the analyzer, Xe is continuously and automatically separated from the atmosphere at flow rates of about 7 m 3 /h on sorption bed. Aliquots collected for 6-12 h are automatically analyzed by electron-photon coincidence spectrometry to produce sensitivities in the range of 20-100 μBq/m 3 of air, about 100-fold better than with reported laboratory-based procedures for short time collection intervals. Spectral data are automatically analyzed and the calculated radioxenon concentrations and raw gamma- ray spectra automatically transmitted to data centers

A Framework for Automatic Web Service Discovery Based on Semantics and NLP Techniques

Directory of Open Access Journals (Sweden)

Asma Adala

2011-01-01

Full Text Available As a greater number of Web Services are made available today, automatic discovery is recognized as an important task. To promote the automation of service discovery, different semantic languages have been created that allow describing the functionality of services in a machine interpretable form using Semantic Web technologies. The problem is that users do not have intimate knowledge about semantic Web service languages and related toolkits. In this paper, we propose a discovery framework that enables semantic Web service discovery based on keywords written in natural language. We describe a novel approach for automatic discovery of semantic Web services which employs Natural Language Processing techniques to match a user request, expressed in natural language, with a semantic Web service description. Additionally, we present an efficient semantic matching technique to compute the semantic distance between ontological concepts.

Students attendance monitoring using near field communication technology

OpenAIRE

Stakėnas, Tautvydas

2017-01-01

Today, near field communication technology (NFC) is one of the most popular automatic identification technologies. There is a lot of research and development in this area trying to make as much use of this technology as possible, and in coming years many new applications and research areas will continue to appear. In this paper the author examines NFC technology application for student’s attendance monitoring. In the first part of the thesis NFC uses, application methods and security levels a...

Automatic plasma control in magnetic traps

International Nuclear Information System (INIS)

Samojlenko, Y.; Chuyanov, V.

1984-01-01

Hot plasma is essentially in thermodynamic non-steady state. Automatic plasma control basically means monitoring deviations from steady state and producing a suitable magnetic or electric field which brings the plasma back to its original state. Briefly described are two systems of automatic plasma control: control with a magnetic field using a negative impedance circuit, and control using an electric field. It appears that systems of automatic plasma stabilization will be an indispensable component of the fusion reactor and its possibilities will in many ways determine the reactor economy. (Ha)

Method of automatic image registration of three-dimensional range of archaeological restoration

International Nuclear Information System (INIS)

Garcia, O.; Perez, M.; Morales, N.

2012-01-01

We propose an automatic registration system for reconstruction of various positions of a large object based on a static structured light pattern. The system combines the technology of stereo vision, structured light pattern, the positioning system of the vision sensor and an algorithm that simplifies the process of finding correspondence for the modeling of large objects. A new structured light pattern based on Kautz sequence is proposed, using this pattern as static implement a proposed new registration method. (Author)

Word Processing in Dyslexics: An Automatic Decoding Deficit?

Science.gov (United States)

Yap, Regina; Van Der Leu, Aryan

1993-01-01

Compares dyslexic children with normal readers on measures of phonological decoding and automatic word processing. Finds that dyslexics have a deficit in automatic phonological decoding skills. Discusses results within the framework of the phonological deficit and the automatization deficit hypotheses. (RS)

Automatically-generated rectal dose constraints in intensity-modulated radiation therapy for prostate cancer

Science.gov (United States)

Hwang, Taejin; Kim, Yong Nam; Kim, Soo Kon; Kang, Sei-Kwon; Cheong, Kwang-Ho; Park, Soah; Yoon, Jai-Woong; Han, Taejin; Kim, Haeyoung; Lee, Meyeon; Kim, Kyoung-Joo; Bae, Hoonsik; Suh, Tae-Suk

2015-06-01

The dose constraint during prostate intensity-modulated radiation therapy (IMRT) optimization should be patient-specific for better rectum sparing. The aims of this study are to suggest a novel method for automatically generating a patient-specific dose constraint by using an experience-based dose volume histogram (DVH) of the rectum and to evaluate the potential of such a dose constraint qualitatively. The normal tissue complication probabilities (NTCPs) of the rectum with respect to V %ratio in our study were divided into three groups, where V %ratio was defined as the percent ratio of the rectal volume overlapping the planning target volume (PTV) to the rectal volume: (1) the rectal NTCPs in the previous study (clinical data), (2) those statistically generated by using the standard normal distribution (calculated data), and (3) those generated by combining the calculated data and the clinical data (mixed data). In the calculated data, a random number whose mean value was on the fitted curve described in the clinical data and whose standard deviation was 1% was generated by using the `randn' function in the MATLAB program and was used. For each group, we validated whether the probability density function (PDF) of the rectal NTCP could be automatically generated with the density estimation method by using a Gaussian kernel. The results revealed that the rectal NTCP probability increased in proportion to V %ratio , that the predictive rectal NTCP was patient-specific, and that the starting point of IMRT optimization for the given patient might be different. The PDF of the rectal NTCP was obtained automatically for each group except that the smoothness of the probability distribution increased with increasing number of data and with increasing window width. We showed that during the prostate IMRT optimization, the patient-specific dose constraints could be automatically generated and that our method could reduce the IMRT optimization time as well as maintain the

ERPs reveal deficits in automatic cerebral stimulus processing in patients with NIDDM.

Science.gov (United States)

Vanhanen, M; Karhu, J; Koivisto, K; Pääkkönen, A; Partanen, J; Laakso, M; Riekkinen, P

1996-11-04

We compared auditory event-related potentials (ERPs) and neuropsychological test scores in nine patients with non-insulin-dependent diabetes mellitus (NIDDM) and in nine control subjects. The measures of automatic stimulus processing, habituation of auditory N100 and mismatch negativity (MMN) were impaired in patients. No differences were observed in the N2b and P3 components, which presumably reflect conscious cognitive analysis of the stimuli. A trend towards impaired performance in the Digit Span backward was found in diabetic subjects, but in the tests of secondary or long-term memory the groups were comparable. Patients with NIDDM may have defects in arousal and in the automatic ability to redirect attention, which can affect their cognitive performance.

Technology

Directory of Open Access Journals (Sweden)

Xu Jing

2016-01-01

Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

Towards Automatic Improvement of Patient Queries in Health Retrieval Systems

Directory of Open Access Journals (Sweden)

Nesrine KSENTINI

2016-07-01

Full Text Available With the adoption of health information technology for clinical health, e-health is becoming usual practice today. Users of this technology find it difficult to seek information relevant to their needs due to the increasing amount of the clinical and medical data on the web, and the lack of knowledge of medical jargon. In this regards, a method is described to improve user's needs by automatically adding new related terms to their queries which appear in the same context of the original query in order to improve final search results. This method is based on the assessment of semantic relationships defined by a proposed statistical method between a set of terms or keywords. Experiments were performed on CLEF-eHealth-2015 database and the obtained results show the effectiveness of our proposed method.

Regulation and Measurement of the Heat Generated by Automatic Tooth Preparation in a Confined Space.

Science.gov (United States)

Yuan, Fusong; Zheng, Jianqiao; Sun, Yuchun; Wang, Yong; Lyu, Peijun

2017-06-01

The aim of this study was to assess and regulate heat generation in the dental pulp cavity and circumambient temperature around a tooth during laser ablation with a femtosecond laser in a confined space. The automatic tooth preparing technique is one of the traditional oral clinical technology innovations. In this technique, a robot controlled an ultrashort pulse laser to automatically complete the three-dimensional teeth preparing in a confined space. The temperature control is the main measure for protecting the tooth nerve. Ten tooth specimens were irradiated with a femtosecond laser controlled by a robot in a confined space to generate 10 teeth preparation. During the process, four thermocouple sensors were used to record the pulp cavity and circumambient environment temperatures with or without air cooling. A statistical analysis of the temperatures was performed between the conditions with and without air cooling (p heat generated in the pulp cavity was lower than the threshold for dental pulp damage. These results indicate that femtosecond laser ablation with air cooling might be an appropriate method for automatic tooth preparing.

Research on Automatic Positioning System of Ultrasonic Testing of Wind Turbine Blade Flaws

Science.gov (United States)

Liu, Q. X.; Wang, Z. H.; Long, S. G.; Cai, M.; Cai, M.; Wang, X.; Chen, X. Y.; Bu, J. L.

2017-11-01

Ultrasonic testing technology has been used essentially in non-destructive testing of wind turbine blades. However, it is fact that the ultrasonic flaw detection method has inefficiently employed in recent years. This is because the testing result will illustrate a small deviation due to the artificial, environmental and technical factors. Therefore, it is an urgent technical demand for engineers to test the various flaws efficiently and quickly. An automatic positioning system has been designed in this paper to record the moving coordinates and the target distance in real time. Simultaneously, it could launch and acquire the sonic wave automatically. The ADNS-3080 optoelectronic chip is manufactured by Agilent Technologies Inc, which is also utilized in the system. With the combination of the chip, the power conversion module and the USB transmission module, the collected data can be transmitted from the upper monitor to the hardware that could process and control the data through software programming. An experiment has been designed to prove the reliability of automotive positioning system. The result has been validated by comparing the result collected form LABVIEW and actual plots on Perspex plane, it concludes that the system possesses high accuracy and magnificent meanings in practical engineering.

Effects of RFID Technology on the Logistics Innovation

OpenAIRE

金, 双鴿; Shuangge, JIN

2010-01-01

An advanced automatic identification technology based on the Radio Frequency Identification (RFID) technology has significant value for inventory systems. RFID tag is a microchip combined with an antenna in a compact package and is called also IC tag. Other benefits of using RFID include the reduction of labor costs, the simplification of business processes, and the reduction of inventory inaccuracies. This paper aims to analyse the effects of RFID technology on the logistics innovation.

Deliberation versus automaticity in decision making: Which presentation format features facilitate automatic decision making?

Directory of Open Access Journals (Sweden)

Anke Soellner

2013-05-01

Full Text Available The idea of automatic decision making approximating normatively optimal decisions without necessitating much cognitive effort is intriguing. Whereas recent findings support the notion that such fast, automatic processes explain empirical data well, little is known about the conditions under which such processes are selected rather than more deliberate stepwise strategies. We investigate the role of the format of information presentation, focusing explicitly on the ease of information acquisition and its influence on information integration processes. In a probabilistic inference task, the standard matrix employed in prior research was contrasted with a newly created map presentation format and additional variations of both presentation formats. Across three experiments, a robust presentation format effect emerged: Automatic decision making was more prevalent in the matrix (with high information accessibility, whereas sequential decision strategies prevailed when the presentation format demanded more information acquisition effort. Further scrutiny of the effect showed that it is not driven by the presentation format as such, but rather by the extent of information search induced by a format. Thus, if information is accessible with minimal need for information search, information integration is likely to proceed in a perception-like, holistic manner. In turn, a moderate demand for information search decreases the likelihood of behavior consistent with the assumptions of automatic decision making.

Estimating cohesion in small groups using audio-visual nonverbal behavior

NARCIS (Netherlands)

Hung, H.; Gatica-Perez, D.

2010-01-01

Cohesiveness in teams is an essential part of ensuring the smooth running of task-oriented groups. Research in social psychology and management has shown that good cohesion in groups can be correlated with team effectiveness or productivity, so automatically estimating group cohesion for team

Atlas-based automatic segmentation of head and neck organs at risk and nodal target volumes: a clinical validation.

Science.gov (United States)

Daisne, Jean-François; Blumhofer, Andreas

2013-06-26

Intensity modulated radiotherapy for head and neck cancer necessitates accurate definition of organs at risk (OAR) and clinical target volumes (CTV). This crucial step is time consuming and prone to inter- and intra-observer variations. Automatic segmentation by atlas deformable registration may help to reduce time and variations. We aim to test a new commercial atlas algorithm for automatic segmentation of OAR and CTV in both ideal and clinical conditions. The updated Brainlab automatic head and neck atlas segmentation was tested on 20 patients: 10 cN0-stages (ideal population) and 10 unselected N-stages (clinical population). Following manual delineation of OAR and CTV, automatic segmentation of the same set of structures was performed and afterwards manually corrected. Dice Similarity Coefficient (DSC), Average Surface Distance (ASD) and Maximal Surface Distance (MSD) were calculated for "manual to automatic" and "manual to corrected" volumes comparisons. In both groups, automatic segmentation saved about 40% of the corresponding manual segmentation time. This effect was more pronounced for OAR than for CTV. The edition of the automatically obtained contours significantly improved DSC, ASD and MSD. Large distortions of normal anatomy or lack of iodine contrast were the limiting factors. The updated Brainlab atlas-based automatic segmentation tool for head and neck Cancer patients is timesaving but still necessitates review and corrections by an expert.

Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram

International Nuclear Information System (INIS)

O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

1993-09-01

The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II

Forensic Automatic Speaker Recognition Based on Likelihood Ratio Using Acoustic-phonetic Features Measured Automatically

Directory of Open Access Journals (Sweden)

Huapeng Wang

2015-01-01

Full Text Available Forensic speaker recognition is experiencing a remarkable paradigm shift in terms of the evaluation framework and presentation of voice evidence. This paper proposes a new method of forensic automatic speaker recognition using the likelihood ratio framework to quantify the strength of voice evidence. The proposed method uses a reference database to calculate the within- and between-speaker variability. Some acoustic-phonetic features are extracted automatically using the software VoiceSauce. The effectiveness of the approach was tested using two Mandarin databases: A mobile telephone database and a landline database. The experiment's results indicate that these acoustic-phonetic features do have some discriminating potential and are worth trying in discrimination. The automatic acoustic-phonetic features have acceptable discriminative performance and can provide more reliable results in evidence analysis when fused with other kind of voice features.

Automatically producing tailored web materials for public administration

Science.gov (United States)

Colineau, Nathalie; Paris, Cécile; Vander Linden, Keith

2013-06-01

Public administration organizations commonly produce citizen-focused, informational materials describing public programs and the conditions under which citizens or citizen groups are eligible for these programs. The organizations write these materials for generic audiences because of the excessive human resource costs that would be required to produce personalized materials for everyone. Unfortunately, generic materials tend to be longer and harder to understand than materials tailored for particular citizens. Our work explores the feasibility and effectiveness of automatically producing tailored materials. We have developed an adaptive hypermedia application system that automatically produces tailored informational materials and have evaluated it in a series of studies. The studies demonstrate that: (1) subjects prefer tailored materials over generic materials, even if the tailoring requires answering a set of demographic questions first; (2) tailored materials are more effective at supporting subjects in their task of learning about public programs; and (3) the time required to specify the demographic information on which the tailoring is based does not significantly slow down the subjects in their information seeking task.

46 CFR 63.25-1 - Small automatic auxiliary boilers.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Small automatic auxiliary boilers. 63.25-1 Section 63.25... AUXILIARY BOILERS Requirements for Specific Types of Automatic Auxiliary Boilers § 63.25-1 Small automatic auxiliary boilers. Small automatic auxiliary boilers defined as having heat-input ratings of 400,000 Btu/hr...

Knowledge-based system for automatic MBR control.

Science.gov (United States)

Comas, J; Meabe, E; Sancho, L; Ferrero, G; Sipma, J; Monclús, H; Rodriguez-Roda, I

2010-01-01

MBR technology is currently challenging traditional wastewater treatment systems and is increasingly selected for WWTP upgrading. MBR systems typically are constructed on a smaller footprint, and provide superior treated water quality. However, the main drawback of MBR technology is that the permeability of membranes declines during filtration due to membrane fouling, which for a large part causes the high aeration requirements of an MBR to counteract this fouling phenomenon. Due to the complex and still unknown mechanisms of membrane fouling it is neither possible to describe clearly its development by means of a deterministic model, nor to control it with a purely mathematical law. Consequently the majority of MBR applications are controlled in an "open-loop" way i.e. with predefined and fixed air scour and filtration/relaxation or backwashing cycles, and scheduled inline or offline chemical cleaning as a preventive measure, without taking into account the real needs of membrane cleaning based on its filtration performance. However, existing theoretical and empirical knowledge about potential cause-effect relations between a number of factors (influent characteristics, biomass characteristics and operational conditions) and MBR operation can be used to build a knowledge-based decision support system (KB-DSS) for the automatic control of MBRs. This KB-DSS contains a knowledge-based control module, which, based on real time comparison of the current permeability trend with "reference trends", aims at optimizing the operation and energy costs and decreasing fouling rates. In practice the automatic control system proposed regulates the set points of the key operational variables controlled in MBR systems (permeate flux, relaxation and backwash times, backwash flows and times, aeration flow rates, chemical cleaning frequency, waste sludge flow rate and recycle flow rates) and identifies its optimal value. This paper describes the concepts and the 3-level architecture

Technology for collecting and analyzing relational data

Directory of Open Access Journals (Sweden)

E. N. Fedorova

2016-01-01

Full Text Available Purpose of the study. The scientific and educational organizations use traditionally e-mail with Microsoft Excel spreadsheets and Microsoft Word documents for operational data collection. The disadvantages of this approach include the lack of control of the correctness of the data input, the complexity of processing the information received due to non-relational data model, etc. There are online services that enable to organize the collection of data in a relational form. The disadvantages of these systems are: the absence of thesaurus support; a limited set of elements of data input control; the limited control the operation of the input form; most of the systems is shareware, etc. Thus, it is required the development of Internet data collection and analysis technology, which should allow to identify quickly model the data collected and automatically implement data collection in accordance with this model.Materials and methods. The article describes the technology developed and tested for operational data collection and analysis using "Faramant" system. System operation "Faramant" is based on a model document, which includes three components: description of the data structure; visualization; logic of form work. All stages of the technology are performed by the user using the browser. The main stage of the proposed technology is the definition of the data model as a set of relational tables. To create a table within the system it’s required to determine the name and a list of fields. For each field, you must specify its name and use the control to the data input and logic of his work. Controls are used to organize the correct input data depending on the data type. Based on a model system "Faramant" automatically creates a filling form, using which users can enter information. To change the form visualization, you can use the form template. The data can be viewed page by page in a table. For table rows, you can apply different filters. To

49 CFR 236.825 - System, automatic train control.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false System, automatic train control. 236.825 Section..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.825 System, automatic train control. A system so arranged that its operation will automatically...

Grid Technology and Quality Assurance

International Nuclear Information System (INIS)

Rippa, A.; Manieri, A.; Begin, M.E.; Di Meglio, A.

2007-01-01

Grid is one of the potential architectures of the coming years to support both the research and the commercial environment. Quality assurance techniques need both to adapt to these new architectures and exploit them to improve its effectiveness. Software quality is a key issue in the Digital Era: Industries as well as Public Administrations devote time to check and verify the quality of ICT products and services supplied. The definition of automatic measurement of quality metrics is a key point for implementing effective QA methods. In this paper we propose a quality certification model, named Grid-based Quality Certification Model (GQCM), that uses automatically calculable metrics to asses the quality of software applications; this model has been developed within the ETICS SSA4 activities and exploit grid technology for full automation of metrics calculation. It is however designed to be generic enough such that it can be implemented using any automatic build and test tool. (Author)

RESEARCH ON THE CONSTRUCTION OF REMOTE SENSING AUTOMATIC INTERPRETATION SYMBOL BIG DATA

Directory of Open Access Journals (Sweden)

Y. Gao

2018-04-01

Full Text Available Remote sensing automatic interpretation symbol (RSAIS is an inexpensive and fast method in providing precise in-situ information for image interpretation and accuracy. This study designed a scientific and precise RSAIS data characterization method, as well as a distributed and cloud architecture massive data storage method. Additionally, it introduced an offline and online data update mode and a dynamic data evaluation mechanism, with the aim to create an efficient approach for RSAIS big data construction. Finally, a national RSAIS database with more than 3 million samples covering 86 land types was constructed during 2013–2015 based on the National Geographic Conditions Monitoring Project of China and then annually updated since the 2016 period. The RSAIS big data has proven to be a good method for large scale image interpretation and field validation. It is also notable that it has the potential to solve image automatic interpretation with the assistance of deep learning technology in the remote sensing big data era.

Research on the Construction of Remote Sensing Automatic Interpretation Symbol Big Data

Science.gov (United States)

Gao, Y.; Liu, R.; Liu, J.; Cheng, T.

2018-04-01

Remote sensing automatic interpretation symbol (RSAIS) is an inexpensive and fast method in providing precise in-situ information for image interpretation and accuracy. This study designed a scientific and precise RSAIS data characterization method, as well as a distributed and cloud architecture massive data storage method. Additionally, it introduced an offline and online data update mode and a dynamic data evaluation mechanism, with the aim to create an efficient approach for RSAIS big data construction. Finally, a national RSAIS database with more than 3 million samples covering 86 land types was constructed during 2013-2015 based on the National Geographic Conditions Monitoring Project of China and then annually updated since the 2016 period. The RSAIS big data has proven to be a good method for large scale image interpretation and field validation. It is also notable that it has the potential to solve image automatic interpretation with the assistance of deep learning technology in the remote sensing big data era.

Synthesis of digital locomotive receiver of automatic locomotive signaling

Directory of Open Access Journals (Sweden)

K. V. Goncharov

2013-02-01

Full Text Available Purpose. Automatic locomotive signaling of continuous type with a numeric coding (ALSN has several disadvantages: a small number of signal indications, low noise stability, high inertia and low functional flexibility. Search for new and more advanced methods of signal processing for automatic locomotive signaling, synthesis of the noise proof digital locomotive receiver are essential. Methodology. The proposed algorithm of detection and identification locomotive signaling codes is based on the definition of mutual correlations of received oscillation and reference signals. For selecting threshold levels of decision element the following criterion has been formulated: the locomotive receiver should maximum set the correct solution for a given probability of dangerous errors. Findings. It has been found that the random nature of the ALSN signal amplitude does not affect the detection algorithm. However, the distribution law and numeric characteristics of signal amplitude affect the probability of errors, and should be considered when selecting a threshold levels According to obtained algorithm of detection and identification ALSN signals the digital locomotive receiver has been synthesized. It contains band pass filter, peak limiter, normalizing amplifier with automatic gain control circuit, analog to digital converter and digital signal processor. Originality. The ALSN system is improved by the way of the transfer of technical means to modern microelectronic element base, more perfect methods of detection and identification codes of locomotive signaling are applied. Practical value. Use of digital technology in the construction of the locomotive receiver ALSN will expand its functionality, will increase the noise immunity and operation stability of the locomotive signal system in conditions of various destabilizing factors.

Alliance group formation: enabling and constraining effects of embeddedness and social capital in strategic technology alliance networks

NARCIS (Netherlands)

Duysters, G.M.; Lemmens, C.E.A.V.

2003-01-01

The role of embeddedness and social capital in the process of alliance group formation in strategic technology alliance networks is examined. In particular, the social mechanisms that enable and enforce alliance group formation is studies. It is argued that the enabling effect of embeddedness during

Automatic validation of numerical solutions

DEFF Research Database (Denmark)

Stauning, Ole

1997-01-01

This thesis is concerned with ``Automatic Validation of Numerical Solutions''. The basic theory of interval analysis and self-validating methods is introduced. The mean value enclosure is applied to discrete mappings for obtaining narrow enclosures of the iterates when applying these mappings...... differential equations, but in this thesis, we describe how to use the methods for enclosing iterates of discrete mappings, and then later use them for discretizing solutions of ordinary differential equations. The theory of automatic differentiation is introduced, and three methods for obtaining derivatives...... are described: The forward, the backward, and the Taylor expansion methods. The three methods have been implemented in the C++ program packages FADBAD/TADIFF. Some examples showing how to use the three metho ds are presented. A feature of FADBAD/TADIFF not present in other automatic differentiation packages...

Automatic generation of natural language nursing shift summaries in neonatal intensive care: BT-Nurse.

Science.gov (United States)

Hunter, James; Freer, Yvonne; Gatt, Albert; Reiter, Ehud; Sripada, Somayajulu; Sykes, Cindy

2012-11-01

Our objective was to determine whether and how a computer system could automatically generate helpful natural language nursing shift summaries solely from an electronic patient record system, in a neonatal intensive care unit (NICU). A system was developed which automatically generates partial NICU shift summaries (for the respiratory and cardiovascular systems), using data-to-text technology. It was evaluated for 2 months in the NICU at the Royal Infirmary of Edinburgh, under supervision. In an on-ward evaluation, a substantial majority of the summaries was found by outgoing and incoming nurses to be understandable (90%), and a majority was found to be accurate (70%), and helpful (59%). The evaluation also served to identify some outstanding issues, especially with regard to extra content the nurses wanted to see in the computer-generated summaries. It is technically possible automatically to generate limited natural language NICU shift summaries from an electronic patient record. However, it proved difficult to handle electronic data that was intended primarily for display to the medical staff, and considerable engineering effort would be required to create a deployable system from our proof-of-concept software. Copyright © 2012 Elsevier B.V. All rights reserved.

Automaticity of walking: functional significance, mechanisms, measurement and rehabilitation strategies

Directory of Open Access Journals (Sweden)

David J Clark

2015-05-01

Full Text Available Automaticity is a hallmark feature of walking in adults who are healthy and well-functioning. In the context of walking, ‘automaticity’ refers to the ability of the nervous system to successfully control typical steady state walking with minimal use of attention-demanding executive control resources. Converging lines of evidence indicate that walking deficits and disorders are characterized in part by a shift in the locomotor control strategy from healthy automaticity to compensatory executive control. This is potentially detrimental to walking performance, as an executive control strategy is not optimized for locomotor control. Furthermore, it places excessive demands on a limited pool of executive reserves. The result is compromised ability to perform basic and complex walking tasks and heightened risk for adverse mobility outcomes including falls. Strategies for rehabilitation of automaticity are not well defined, which is due to both a lack of systematic research into the causes of impaired automaticity and to a lack of robust neurophysiological assessments by which to gauge automaticity. These gaps in knowledge are concerning given the serious functional implications of compromised automaticity. Therefore, the objective of this article is to advance the science of automaticity of walking by consolidating evidence and identifying gaps in knowledge regarding: a functional significance of automaticity; b neurophysiology of automaticity; c measurement of automaticity; d mechanistic factors that compromise automaticity; and e strategies for rehabilitation of automaticity.

The Use of Automatic Indexing for Authority Control.

Science.gov (United States)

Dillon, Martin; And Others

1981-01-01

Uses an experimental system for authority control on a collection of bibliographic records to demonstrate the resemblance between thesaurus-based automatic indexing and automatic authority control. Details of the automatic indexing system are given, results discussed, and the benefits of the resemblance examined. Included are a rules appendix and…

30 CFR 77.1401 - Automatic controls and brakes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic controls and brakes. 77.1401 Section... MINES Personnel Hoisting § 77.1401 Automatic controls and brakes. Hoists and elevators shall be equipped with overspeed, overwind, and automatic stop controls and with brakes capable of stopping the elevator...

30 CFR 57.19006 - Automatic hoist braking devices.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic hoist braking devices. 57.19006 Section 57.19006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 57.19006 Automatic hoist braking devices. Automatic hoists shall be provided with devices...

30 CFR 56.19006 - Automatic hoist braking devices.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic hoist braking devices. 56.19006 Section 56.19006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 56.19006 Automatic hoist braking devices. Automatic hoists shall be provided with devices...

REALIZATION OF TRAINING PROGRAMME ON THE BASIS OF LINGUISTIC DATABASE FOR AUTOMATIC TEXTS PROCESSING SYSTEM

Directory of Open Access Journals (Sweden)

M. A. Makarych

2016-01-01

Full Text Available Due to the constant increasing of electronic textual information, modern society needs for the automatic processing of natural language (NL. The main purpose of NL automatic text processing systems is to analyze and create texts and represent their content. The purpose of the paper is the development of linguistic and software bases of an automatic system for processing English publicistic texts. This article discusses the examples of different approaches to the creation of linguistic databases for processing systems. The author gives a detailed description of basic building blocks for a new linguistic processor: lexical-semantic, syntactical and semantic-syntactical. The main advantage of the processor is using special semantic codes in the alphabetical dictionary. The semantic codes have been developed in accordance with a lexical-semantic classification. It helps to precisely define semantic functions of the keywords that are situated in parsing groups and allows the automatic system to avoid typical mistakes. The author also represents the realization of a developed linguistic database in the form of a training computer program.

Development of the automatic control rod operation system for JOYO. Verification of automatic control rod operation guide system

International Nuclear Information System (INIS)

Terakado, Tsuguo; Suzuki, Shinya; Kawai, Masashi; Aoki, Hiroshi; Ohkubo, Toshiyuki

1999-10-01

The automatic control rod operation system was developed to control the JOYO reactor power automatically in all operation modes(critical approach, cooling system heat up, power ascent, power descent), development began in 1989. Prior to applying the system, verification tests of the automatic control rod operation guide system was conducted during 32nd duty cycles of JOYO' from Dec. 1997 to Feb. 1998. The automatic control rod operation guide system consists of the control rod operation guide function and the plant operation guide function. The control rod operation guide function provides information on control rod movement and position, while the plant operation guide function provide guidance for plant operations corresponding to reactor power changes(power ascent or power descent). Control rod insertion or withdrawing are predicted by fuzzy algorithms. (J.P.N.)

New Network of Automatic Stations integrated in the CSNs Environmental Radiological Surveillance Network; Nueva Red de Estaciones Automaticas integrada en la Red de Vigilancia Radiologica Ambiental del CSN

Energy Technology Data Exchange (ETDEWEB)

Parages Perez del Yerro, C.; Garcia Cadierno, J. P.; Calvin Cuartero, M.

2016-05-01

In 1992, the Council put into operation a network comprising 25 automatic stations for continuous monitoring of the radiological quality of the air and the detection of anomalous situations. It has now decided to undertake the renewal and modernisation of these installations, incorporating sensors and automatic connection and communication systems based on the best technology currently available. (Author)

Dignity and Deferral Narratives as Strategies in Facilitated Technology-Based Support Groups for People with Advanced Cancer

Directory of Open Access Journals (Sweden)

Annette F. Street

2012-01-01

Full Text Available This paper examines the value of facilitated telephone and online support groups for palliative care. Telephone interviews were conducted with twenty people living with advanced cancer who had participated in either a telephone or online support group facilitated by the Cancer Council Victoria, Melbourne, Australia. Two dominant participant narratives emerged: a focus on dying with dignity or an interest in deferring discussion of death and dying to focus on the present. Despite the different approaches, participants found the technology-based support groups to be accessible and safe environments in which to discuss difficult topics in privacy. Technology-based strategies provide opportunities for health professionals to provide social and emotional care to more people by moving beyond individualised care and facilitate peer-to-peer support at the end of life, especially to those with specific needs. Such options are feasible for palliative care services to set up and acceptable to a group of clients, especially for younger clients or those socially or geographically isolated.

Precision about the automatic emotional brain.

Science.gov (United States)

Vuilleumier, Patrik

2015-01-01

The question of automaticity in emotion processing has been debated under different perspectives in recent years. Satisfying answers to this issue will require a better definition of automaticity in terms of relevant behavioral phenomena, ecological conditions of occurrence, and a more precise mechanistic account of the underlying neural circuits.

Automatic control of nuclear power plants

International Nuclear Information System (INIS)

Jover, P.

1976-01-01

The fundamental concepts in automatic control are surveyed, and the purpose of the automatic control of pressurized water reactors is given. The response characteristics for the main components are then studied and block diagrams are given for the main control loops (turbine, steam generator, and nuclear reactors) [fr

An Automatic Decision-Making Mechanism for Virtual Machine Live Migration in Private Clouds

Directory of Open Access Journals (Sweden)

Ming-Tsung Kao

2014-01-01

Full Text Available Due to the increasing number of computer hosts deployed in an enterprise, automatic management of electronic applications is inevitable. To provide diverse services, there will be increases in procurement, maintenance, and electricity costs. Virtualization technology is getting popular in cloud computing environment, which enables the efficient use of computing resources and reduces the operating cost. In this paper, we present an automatic mechanism to consolidate virtual servers and shut down the idle physical machines during the off-peak hours, while activating more machines at peak times. Through the monitoring of system resources, heavy system loads can be evenly distributed over physical machines to achieve load balancing. By integrating the feature of load balancing with virtual machine live migration, we successfully develop an automatic private cloud management system. Experimental results demonstrate that, during the off-peak hours, we can save power consumption of about 69 W by consolidating the idle virtual servers. And the load balancing implementation has shown that two machines with 80% and 40% CPU loads can be uniformly balanced to 60% each. And, through the use of preallocated virtual machine images, the proposed mechanism can be easily applied to a large amount of physical machines.

Data-Base Software For Tracking Technological Developments

Science.gov (United States)

Aliberti, James A.; Wright, Simon; Monteith, Steve K.

1996-01-01

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

Dairy farmers with larger herd sizes adopt more precision dairy technologies.

Science.gov (United States)

Gargiulo, J I; Eastwood, C R; Garcia, S C; Lyons, N A

2018-06-01

An increase in the average herd size on Australian dairy farms has also increased the labor and animal management pressure on farmers, thus potentially encouraging the adoption of precision technologies for enhanced management control. A survey was undertaken in 2015 in Australia to identify the relationship between herd size, current precision technology adoption, and perception of the future of precision technologies. Additionally, differences between farmers and service providers in relation to perception of future precision technology adoption were also investigated. Responses from 199 dairy farmers, and 102 service providers, were collected between May and August 2015 via an anonymous Internet-based questionnaire. Of the 199 dairy farmer responses, 10.4% corresponded to farms that had fewer than 150 cows, 37.7% had 151 to 300 cows, 35.5% had 301 to 500 cows; 6.0% had 501 to 700 cows, and 10.4% had more than 701 cows. The results showed that farmers with more than 500 cows adopted between 2 and 5 times more specific precision technologies, such as automatic cup removers, automatic milk plant wash systems, electronic cow identification systems and herd management software, when compared with smaller farms. Only minor differences were detected in perception of the future of precision technologies between either herd size or farmers and service providers. In particular, service providers expected a higher adoption of automatic milking and walk over weighing systems than farmers. Currently, the adoption of precision technology has mostly been of the type that reduces labor needs; however, respondents indicated that by 2025 adoption of data capturing technology for monitoring farm system parameters would be increased. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Interactivity in automatic control: foundations and experiences

OpenAIRE

Dormido Bencomo, Sebastián; Guzmán Sánchez, José Luis; Costa Castelló, Ramon; Berenguel, M

2012-01-01

The first part of this paper presents the concepts of interactivity and visualization and its essential role in learning the fundamentals and techniques of automatic control. More than 10 years experience of the authors in the development and design of interactive tools dedicated to the study of automatic control concepts are also exposed. The second part of the paper summarizes the main features of the “Automatic Control with Interactive Tools” text that has been recently published by Pea...

Towards unifying inheritance and automatic program specialization

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh

2002-01-01

with covariant specialization to control the automatic application of program specialization to class members. Lapis integrates object-oriented concepts, block structure, and techniques from automatic program specialization to provide both a language where object-oriented designs can be e#ciently implemented......Inheritance allows a class to be specialized and its attributes refined, but implementation specialization can only take place by overriding with manually implemented methods. Automatic program specialization can generate a specialized, effcient implementation. However, specialization of programs...

Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram

International Nuclear Information System (INIS)

O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

1993-09-01

The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet

Automatic NAA. Saturation activities

International Nuclear Information System (INIS)

Westphal, G.P.; Grass, F.; Kuhnert, M.

2008-01-01

A system for Automatic NAA is based on a list of specific saturation activities determined for one irradiation position at a given neutron flux and a single detector geometry. Originally compiled from measurements of standard reference materials, the list may be extended also by the calculation of saturation activities from k 0 and Q 0 factors, and f and α values of the irradiation position. A systematic improvement of the SRM approach is currently being performed by pseudo-cyclic activation analysis, to reduce counting errors. From these measurements, the list of saturation activities is recalculated in an automatic procedure. (author)

The AMIDA automatic content linking device: Just-in-time document retrieval in meetings

NARCIS (Netherlands)

Popescu-Belis, A.; Boertjes, E.M.; Kilgour, J.; Poller, P.; Castronovo, S.; Wilson, T.; Jaimes, A.; Carletta, J.

2008-01-01

The AMIDA Automatic Content Linking Device (ACLD) is a just-in-time document retrieval system for meeting environments. The ACLD listens to a meeting and displays information about the documents from the group's history that are most relevant to what is being said. Participants can view an outline

Automatic measurement for solid state track detectors

International Nuclear Information System (INIS)

Ogura, Koichi

1982-01-01

Since in solid state track detectors, their tracks are measured with a microscope, observers are forced to do hard works that consume time and labour. This causes to obtain poor statistic accuracy or to produce personal error. Therefore, many researches have been done to aim at simplifying and automating track measurement. There are two categories in automating the measurement: simple counting of the number of tracks and the requirements to know geometrical elements such as the size of tracks or their coordinates as well as the number of tracks. The former is called automatic counting and the latter automatic analysis. The method to generally evaluate the number of tracks in automatic counting is the estimation of the total number of tracks in the total detector area or in a field of view of a microscope. It is suitable for counting when the track density is higher. The method to count tracks one by one includes the spark counting and the scanning microdensitometer. Automatic analysis includes video image analysis in which the high quality images obtained with a high resolution video camera are processed with a micro-computer, and the tracks are automatically recognized and measured by feature extraction. This method is described in detail. In many kinds of automatic measurements reported so far, frequently used ones are ''spark counting'' and ''video image analysis''. (Wakatsuki, Y.)

An Automatic Detection Method of Nanocomposite Film Element Based on GLCM and Adaboost M1

Directory of Open Access Journals (Sweden)

Hai Guo

2015-01-01

Full Text Available An automatic detection model adopting pattern recognition technology is proposed in this paper; it can realize the measurement to the element of nanocomposite film. The features of gray level cooccurrence matrix (GLCM can be extracted from different types of surface morphology images of film; after that, the dimension reduction of film can be handled by principal component analysis (PCA. So it is possible to identify the element of film according to the Adaboost M1 algorithm of a strong classifier with ten decision tree classifiers. The experimental result shows that this model is superior to the ones of SVM (support vector machine, NN and BayesNet. The method proposed can be widely applied to the automatic detection of not only nanocomposite film element but also other nanocomposite material elements.

Set of information technologies and their role in automation of agricultural production

OpenAIRE

V. V. Al’t

2018-01-01

The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of a...

Automatic Transformation of MPI Programs to Asynchronous, Graph-Driven Form

Energy Technology Data Exchange (ETDEWEB)

Baden, Scott B [University of California, San Diego; Weare, John H [University of California, San Diego; Bylaska, Eric J [Pacific Northwest National Laboratory

2013-04-30

The goals of this project are to develop new, scalable, high-fidelity algorithms for atomic-level simulations and program transformations that automatically restructure existing applications, enabling them to scale forward to Petascale systems and beyond. The techniques enable legacy MPI application code to exploit greater parallelism though increased latency hiding and improved workload assignment. The techniques were successfully demonstrated on high-end scalable systems located at DOE laboratories. Besides the automatic MPI program transformations efforts, the project also developed several new scalable algorithms for ab-initio molecular dynamics, including new massively parallel algorithms for hybrid DFT and new parallel in time algorithms for molecular dynamics and ab-initio molecular dynamics. These algorithms were shown to scale to very large number of cores, and they were designed to work in the latency hiding framework developed in this project. The effectiveness of the developments was enhanced by the direct application to real grand challenge simulation problems covering a wide range of technologically important applications, time scales and accuracies. These included the simulation of the electronic structure of mineral/fluid interfaces, the very accurate simulation of chemical reactions in microsolvated environments, and the simulation of chemical behavior in very large enzyme reactions.

Automatization of welding

International Nuclear Information System (INIS)

Iwabuchi, Masashi; Tomita, Jinji; Nishihara, Katsunori.

1978-01-01

Automatization of welding is one of the effective measures for securing high degree of quality of nuclear power equipment, as well as for correspondence to the environment at the site of plant. As the latest ones of the automatic welders practically used for welding of nuclear power apparatuses in factories of Toshiba and IHI, those for pipes and lining tanks are described here. The pipe welder performs the battering welding on the inside of pipe end as the so-called IGSCC countermeasure and the succeeding butt welding through the same controller. The lining tank welder is able to perform simultaneous welding of two parallel weld lines on a large thin plate lining tank. Both types of the welders are demonstrating excellent performance at the shops as well as at the plant site. (author)

Speed and automaticity of word recognition - inseparable twins?

DEFF Research Database (Denmark)

Poulsen, Mads; Asmussen, Vibeke; Elbro, Carsten

'Speed and automaticity' of word recognition is a standard collocation. However, it is not clear whether speed and automaticity (i.e., effortlessness) make independent contributions to reading comprehension. In theory, both speed and automaticity may save cognitive resources for comprehension...... processes. Hence, the aim of the present study was to assess the unique contributions of word recognition speed and automaticity to reading comprehension while controlling for decoding speed and accuracy. Method: 139 Grade 5 students completed tests of reading comprehension and computer-based tests of speed...... of decoding and word recognition together with a test of effortlessness (automaticity) of word recognition. Effortlessness was measured in a dual task in which participants were presented with a word enclosed in an unrelated figure. The task was to read the word and decide whether the figure was a triangle...

Working Group 2: Future Directions for Safeguards and Verification, Technology, Research and Development

International Nuclear Information System (INIS)

Zykov, S.; Blair, D.

2013-01-01

For traditional safeguards it was recognized that the hardware presently available is, in general, addressing adequately fundamental IAEA needs, and that further developments should therefore focus mainly on improving efficiencies (i.e. increasing cost economies, reliability, maintainability and user-friendliness, keeping abreast of continual advancements in technologies and of the evolution of verification approaches). Specific technology areas that could benefit from further development include: -) Non-destructive measurement systems (NDA), in particular, gamma-spectroscopy and neutron counting techniques; -) Containment and surveillance tools, such as tamper indicating seals, video-surveillance, surface identification methods, etc.; -) Geophysical methods for design information verification (DIV) and safeguarding of geological repositories; and -) New tools and methods for real-time monitoring. Furthermore, the Working Group acknowledged that a 'building block' (or modular) approach should be adopted towards technology development, enabling equipment to be upgraded efficiently as technologies advance. Concerning non-traditional safeguards, in the area of satellite-based sensors, increased spatial resolution and broadened spectral range were identified as priorities. In the area of wide area surveillance, the development of LIDAR-like tools for atmospheric sensing was discussed from the perspective of both potential benefits and certain limitations. Recognizing the limitations imposed by the human brain in terms of information assessment and analysis, technologies are needed that will enable the more effective utilization of all information, regardless of its format and origin. The paper is followed by the slides of the presentation. (A.C.)

Atlas-based automatic segmentation of head and neck organs at risk and nodal target volumes: a clinical validation

International Nuclear Information System (INIS)

Daisne, Jean-François; Blumhofer, Andreas

2013-01-01

Intensity modulated radiotherapy for head and neck cancer necessitates accurate definition of organs at risk (OAR) and clinical target volumes (CTV). This crucial step is time consuming and prone to inter- and intra-observer variations. Automatic segmentation by atlas deformable registration may help to reduce time and variations. We aim to test a new commercial atlas algorithm for automatic segmentation of OAR and CTV in both ideal and clinical conditions. The updated Brainlab automatic head and neck atlas segmentation was tested on 20 patients: 10 cN0-stages (ideal population) and 10 unselected N-stages (clinical population). Following manual delineation of OAR and CTV, automatic segmentation of the same set of structures was performed and afterwards manually corrected. Dice Similarity Coefficient (DSC), Average Surface Distance (ASD) and Maximal Surface Distance (MSD) were calculated for “manual to automatic” and “manual to corrected” volumes comparisons. In both groups, automatic segmentation saved about 40% of the corresponding manual segmentation time. This effect was more pronounced for OAR than for CTV. The edition of the automatically obtained contours significantly improved DSC, ASD and MSD. Large distortions of normal anatomy or lack of iodine contrast were the limiting factors. The updated Brainlab atlas-based automatic segmentation tool for head and neck Cancer patients is timesaving but still necessitates review and corrections by an expert

Reliability analysis of the automatic control and power supply of reactor equipment

International Nuclear Information System (INIS)

Monori, Pal; Nagy, J.A.; Meszaros, Zoltan; Konkoly, Laszlo; Szabo, Antal; Nagy, Laszlo

1988-01-01

Based on reliability analysis the shortcomings of nuclear facilities are discovered. Fault tree types constructed for the technology of automatic control and for power supply serve as input data of the ORCHARD 2 computer code. In order to charaterize the reliability of the system, availability, failure rates and time intervals between failures are calculated. The results of the reliability analysis of the feedwater system of the Paks Nuclear Power Plant showed that the system consisted of elements of similar reliabilities. (V.N.) 8 figs.; 3 tabs

Preliminary study on computer automatic quantification of brain atrophy

International Nuclear Information System (INIS)

Li Chuanfu; Zhou Kangyuan

2006-01-01

Objective: To study the variability of normal brain volume with the sex and age, and put forward an objective standard for computer automatic quantification of brain atrophy. Methods: The cranial volume, brain volume and brain parenchymal fraction (BPF) of 487 cases of brain atrophy (310 males, 177 females) and 1901 cases of normal subjects (993 males, 908 females) were calculated with the newly developed algorithm of automatic quantification for brain atrophy. With the technique of polynomial curve fitting, the mathematical relationship of BPF with age in normal subjects was analyzed. Results: The cranial volume, brain volume and BPF of normal subjects were (1 271 322 ± 128 699) mm 3 , (1 211 725 ± 122 077) mm 3 and (95.3471 ± 2.3453)%, respectively, and those of atrophy subjects were (1 276 900 ± 125 180) mm 3 , (1 203 400 ± 117 760) mm 3 and BPF(91.8115 ± 2.3035)% respectively. The difference of BPF between the two groups was extremely significant (P 0.05). The expression P(x)=-0.0008x 2 + 0.0193x + 96.9999 could accurately describe the mathematical relationship between BPF and age in normal subject (lower limit of 95% CI y=-0.0008x 2 +0.0184x+95.1090). Conclusion: The lower limit of 95% confidence interval mathematical relationship between BPF and age could be used as an objective criteria for automatic quantification of brain atrophy with computer. (authors)

Automatic terrain modeling using transfinite element analysis

KAUST Repository

Collier, Nathan; Calo, Victor M.

2010-01-01

An automatic procedure for modeling terrain is developed based on L2 projection-based interpolation of discrete terrain data onto transfinite function spaces. The function space is refined automatically by the use of image processing techniques