WorldWideScience

Sample records for automated culture systems

  1. Long-term maintenance of human induced pluripotent stem cells by automated cell culture system.

    Science.gov (United States)

    Konagaya, Shuhei; Ando, Takeshi; Yamauchi, Toshiaki; Suemori, Hirofumi; Iwata, Hiroo

    2015-11-17

    Pluripotent stem cells, such as embryonic stem cells and induced pluripotent stem (iPS) cells, are regarded as new sources for cell replacement therapy. These cells can unlimitedly expand under undifferentiated conditions and be differentiated into multiple cell types. Automated culture systems enable the large-scale production of cells. In addition to reducing the time and effort of researchers, an automated culture system improves the reproducibility of cell cultures. In the present study, we newly designed a fully automated cell culture system for human iPS maintenance. Using an automated culture system, hiPS cells maintained their undifferentiated state for 60 days. Automatically prepared hiPS cells had a potency of differentiation into three germ layer cells including dopaminergic neurons and pancreatic cells.

  2. Performance of Gram staining on blood cultures flagged negative by an automated blood culture system.

    Science.gov (United States)

    Peretz, A; Isakovich, N; Pastukh, N; Koifman, A; Glyatman, T; Brodsky, D

    2015-08-01

    Blood is one of the most important specimens sent to a microbiology laboratory for culture. Most blood cultures are incubated for 5-7 days, except in cases where there is a suspicion of infection caused by microorganisms that proliferate slowly, or infections expressed by a small number of bacteria in the bloodstream. Therefore, at the end of incubation, misidentification of positive cultures and false-negative results are a real possibility. The aim of this work was to perform a confirmation by Gram staining of the lack of any microorganisms in blood cultures that were identified as negative by the BACTEC™ FX system at the end of incubation. All bottles defined as negative by the BACTEC FX system were Gram-stained using an automatic device and inoculated on solid growth media. In our work, 15 cultures that were defined as negative by the BACTEC FX system at the end of the incubation were found to contain microorganisms when Gram-stained. The main characteristic of most bacteria and fungi growing in the culture bottles that were defined as negative was slow growth. This finding raises a problematic issue concerning the need to perform Gram staining of all blood cultures, which could overload the routine laboratory work, especially laboratories serving large medical centers and receiving a large number of blood cultures.

  3. Automated Static Culture System Cell Module Mixing Protocol and Computational Fluid Dynamics Analysis

    Science.gov (United States)

    Kleis, Stanley J.; Truong, Tuan; Goodwin, Thomas J,

    2004-01-01

    This report is a documentation of a fluid dynamic analysis of the proposed Automated Static Culture System (ASCS) cell module mixing protocol. The report consists of a review of some basic fluid dynamics principles appropriate for the mixing of a patch of high oxygen content media into the surrounding media which is initially depleted of oxygen, followed by a computational fluid dynamics (CFD) study of this process for the proposed protocol over a range of the governing parameters. The time histories of oxygen concentration distributions and mechanical shear levels generated are used to characterize the mixing process for different parameter values.

  4. Automated Budget System

    Data.gov (United States)

    Department of Transportation — The Automated Budget System (ABS) automates management and planning of the Mike Monroney Aeronautical Center (MMAC) budget by providing enhanced capability to plan,...

  5. Cultural Heritage: An example of graphical documentation with automated photogrammetric systems

    Science.gov (United States)

    Giuliano, M. G.

    2014-06-01

    In the field of Cultural Heritage, the use of automated photogrammetric systems, based on Structure from Motion techniques (SfM), is widely used, in particular for the study and for the documentation of the ancient ruins. This work has been carried out during the PhD cycle that was produced the "Carta Archeologica del territorio intorno al monte Massico". The study suggests the archeological documentation of the mausoleum "Torre del Ballerino" placed in the south-west area of Falciano del Massico, along the Via Appia. The graphic documentation has been achieved by using photogrammetric system (Image Based Modeling) and by the classical survey with total station, Nikon Nivo C. The data acquisition was carried out through digital camera Canon EOS 5D Mark II with Canon EF 17-40 mm f/4L USM @ 20 mm with images snapped in RAW and corrected in Adobe Lightroom. During the data processing, the camera calibration and orientation was carried out by the software Agisoft Photoscans and the final result has allowed to achieve a scaled 3D model of the monument, imported in software MeshLab for the different view. Three orthophotos in jpg format were extracted by the model, and then were imported in AutoCAD obtaining façade's surveys.

  6. Automated DNA Sequencing System

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, G.A.; Ekkebus, C.P.; Hauser, L.J.; Kress, R.L.; Mural, R.J.

    1999-04-25

    Oak Ridge National Laboratory (ORNL) is developing a core DNA sequencing facility to support biological research endeavors at ORNL and to conduct basic sequencing automation research. This facility is novel because its development is based on existing standard biology laboratory equipment; thus, the development process is of interest to the many small laboratories trying to use automation to control costs and increase throughput. Before automation, biology Laboratory personnel purified DNA, completed cycle sequencing, and prepared 96-well sample plates with commercially available hardware designed specifically for each step in the process. Following purification and thermal cycling, an automated sequencing machine was used for the sequencing. A technician handled all movement of the 96-well sample plates between machines. To automate the process, ORNL is adding a CRS Robotics A- 465 arm, ABI 377 sequencing machine, automated centrifuge, automated refrigerator, and possibly an automated SpeedVac. The entire system will be integrated with one central controller that will direct each machine and the robot. The goal of this system is to completely automate the sequencing procedure from bacterial cell samples through ready-to-be-sequenced DNA and ultimately to completed sequence. The system will be flexible and will accommodate different chemistries than existing automated sequencing lines. The system will be expanded in the future to include colony picking and/or actual sequencing. This discrete event, DNA sequencing system will demonstrate that smaller sequencing labs can achieve cost-effective the laboratory grow.

  7. Automated analysis of food-borne pathogens using a novel microbial cell culture, sensing and classification system.

    Science.gov (United States)

    Xiang, Kun; Li, Yinglei; Ford, William; Land, Walker; Schaffer, J David; Congdon, Robert; Zhang, Jing; Sadik, Omowunmi

    2016-02-21

    We hereby report the design and implementation of an Autonomous Microbial Cell Culture and Classification (AMC(3)) system for rapid detection of food pathogens. Traditional food testing methods require multistep procedures and long incubation period, and are thus prone to human error. AMC(3) introduces a "one click approach" to the detection and classification of pathogenic bacteria. Once the cultured materials are prepared, all operations are automatic. AMC(3) is an integrated sensor array platform in a microbial fuel cell system composed of a multi-potentiostat, an automated data collection system (Python program, Yocto Maxi-coupler electromechanical relay module) and a powerful classification program. The classification scheme consists of Probabilistic Neural Network (PNN), Support Vector Machines (SVM) and General Regression Neural Network (GRNN) oracle-based system. Differential Pulse Voltammetry (DPV) is performed on standard samples or unknown samples. Then, using preset feature extractions and quality control, accepted data are analyzed by the intelligent classification system. In a typical use, thirty-two extracted features were analyzed to correctly classify the following pathogens: Escherichia coli ATCC#25922, Escherichia coli ATCC#11775, and Staphylococcus epidermidis ATCC#12228. 85.4% accuracy range was recorded for unknown samples, and within a shorter time period than the industry standard of 24 hours.

  8. Hydrometeorological Automated Data System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Office of Hydrologic Development of the National Weather Service operates HADS, the Hydrometeorological Automated Data System. This data set contains the last 48...

  9. An automated blood culture system: the detection of anaerobic bacteria using a Malthus Microbiological Growth Analyser.

    Science.gov (United States)

    McMaster, J P; Barr, J G; Campbell, R R; Bennett, R B; Smyth, E T

    1985-10-01

    The Malthus Microbiological Growth Analyser has proved to be sensitive in detecting conductivity changes due to anaerobic metabolism in a number of widely used blood culture media. Freshly prepared cooked meat media and Thiol medium yielded the greatest gross conductivity changes, and were more sensitive of anaerobic metabolism than other media. Failure of the instrument to detect anaerobic metabolism was a problem particularly associated with growth in the thioglycollate medium. False positive detections of growth were attributed to a number of factors including electrode instability (6.0%) and bacterial contamination (8.75%).

  10. [Automated anesthesia record system].

    Science.gov (United States)

    Zhu, Tao; Liu, Jin

    2005-12-01

    Based on Client/Server architecture, a software of automated anesthesia record system running under Windows operation system and networks has been developed and programmed with Microsoft Visual C++ 6.0, Visual Basic 6.0 and SQL Server. The system can deal with patient's information throughout the anesthesia. It can collect and integrate the data from several kinds of medical equipment such as monitor, infusion pump and anesthesia machine automatically and real-time. After that, the system presents the anesthesia sheets automatically. The record system makes the anesthesia record more accurate and integral and can raise the anesthesiologist's working efficiency.

  11. Disassembly automation automated systems with cognitive abilities

    CERN Document Server

    Vongbunyong, Supachai

    2015-01-01

    This book presents a number of aspects to be considered in the development of disassembly automation, including the mechanical system, vision system and intelligent planner. The implementation of cognitive robotics increases the flexibility and degree of autonomy of the disassembly system. Disassembly, as a step in the treatment of end-of-life products, can allow the recovery of embodied value left within disposed products, as well as the appropriate separation of potentially-hazardous components. In the end-of-life treatment industry, disassembly has largely been limited to manual labor, which is expensive in developed countries. Automation is one possible solution for economic feasibility. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

  12. World-wide distribution automation systems

    Energy Technology Data Exchange (ETDEWEB)

    Devaney, T.M.

    1994-12-31

    A worldwide power distribution automation system is outlined. Distribution automation is defined and the status of utility automation is discussed. Other topics discussed include a distribution management system, substation feeder, and customer functions, potential benefits, automation costs, planning and engineering considerations, automation trends, databases, system operation, computer modeling of system, and distribution management systems.

  13. Automated Gas Distribution System

    Science.gov (United States)

    Starke, Allen; Clark, Henry

    2012-10-01

    The cyclotron of Texas A&M University is one of the few and prized cyclotrons in the country. Behind the scenes of the cyclotron is a confusing, and dangerous setup of the ion sources that supplies the cyclotron with particles for acceleration. To use this machine there is a time consuming, and even wasteful step by step process of switching gases, purging, and other important features that must be done manually to keep the system functioning properly, while also trying to maintain the safety of the working environment. Developing a new gas distribution system to the ion source prevents many of the problems generated by the older manually setup process. This developed system can be controlled manually in an easier fashion than before, but like most of the technology and machines in the cyclotron now, is mainly operated based on software programming developed through graphical coding environment Labview. The automated gas distribution system provides multi-ports for a selection of different gases to decrease the amount of gas wasted through switching gases, and a port for the vacuum to decrease the amount of time spent purging the manifold. The Labview software makes the operation of the cyclotron and ion sources easier, and safer for anyone to use.

  14. Multifunction automated crawling system

    Science.gov (United States)

    Bar-Cohen, Yoseph (Inventor); Joffe, Benjamin (Inventor); Backes, Paul Gregory (Inventor)

    1999-01-01

    The present invention is an automated crawling robot system including a platform, a first leg assembly, a second leg assembly, first and second rails attached to the platform, and an onboard electronic computer controller. The first leg assembly has an intermittent coupling device and the second leg assembly has an intermittent coupling device for intermittently coupling the respective first and second leg assemblies to a particular object. The first and second leg assemblies are slidably coupled to the rail assembly and are slidably driven by motors to thereby allow linear movement. In addition, the first leg assembly is rotary driven by a rotary motor to thereby provide rotary motion relative to the platform. To effectuate motion, the intermittent coupling devices of the first and second leg assemblies alternately couple the respective first and second leg assemblies to an object. This motion is done while simultaneously moving one of the leg assemblies linearly in the desired direction and preparing the next step. This arrangement allows the crawler of the present invention to traverse an object in a range of motion covering 360 degrees.

  15. Culture expansion of adipose derived stromal cells. A closed automated Quantum Cell Expansion System compared with manual flask-based culture

    DEFF Research Database (Denmark)

    Haack-Sørensen, Mandana; Follin, Bjarke; Juhl, Morten

    2016-01-01

    BACKGROUND: Adipose derived stromal cells (ASCs) are a rich and convenient source of cells for clinical regenerative therapeutic approaches. However, applications of ASCs often require cell expansion to reach the needed dose. In this study, cultivation of ASCs from stromal vascular fraction (SVF......) over two passages in the automated and functionally closed Quantum Cell Expansion System (Quantum system) is compared with traditional manual cultivation. METHODS: Stromal vascular fraction was isolated from abdominal fat, suspended in α-MEM supplemented with 10% Fetal Bovine Serum and seeded......, and endotoxins, in addition to the assessment of cell counts, viability, immunophenotype, and differentiation potential. RESULTS: The viability of ASCs passage 0 (P0) and P1 was above 96%, regardless of cultivation in flasks or Quantum system. Expression of surface markers and differentiation potential...

  16. An Extended Case Study Methoology for Investigating Influence of Cultural, Organizational, and Automation Factors on Human-Automation Trust

    Science.gov (United States)

    Koltai, Kolina Sun; Ho, Nhut; Masequesmay, Gina; Niedober, David; Skoog, Mark; Johnson, Walter; Cacanindin, Artemio

    2014-01-01

    This paper discusses a case study that examined the influence of cultural, organizational and automation capability upon human trust in, and reliance on, automation. In particular, this paper focuses on the design and application of an extended case study methodology, and on the foundational lessons revealed by it. Experimental test pilots involved in the research and development of the US Air Forces newly developed Automatic Ground Collision Avoidance System served as the context for this examination. An eclectic, multi-pronged approach was designed to conduct this case study, and proved effective in addressing the challenges associated with the cases politically sensitive and military environment. Key results indicate that the system design was in alignment with pilot culture and organizational mission, indicating the potential for appropriate trust development in operational pilots. These include the low-vulnerabilityhigh risk nature of the pilot profession, automation transparency and suspicion, system reputation, and the setup of and communications among organizations involved in the system development.

  17. Automated process planning system

    Science.gov (United States)

    Mann, W.

    1978-01-01

    Program helps process engineers set up manufacturing plans for machined parts. System allows one to develop and store library of similar parts characteristics, as related to particular facility. Information is then used in interactive system to help develop manufacturing plans that meet required standards.

  18. Budget Automation System

    Data.gov (United States)

    U.S. Environmental Protection Agency — BAS is the central Agency system used to integrate strategic planning, annual planning, budgeting and financial management. BAS contains resource (dollars and FTE),...

  19. Automated Maintenance Management System -

    Data.gov (United States)

    Department of Transportation — To achieve the to-be state of a modernized supply chain infrastructure and the NextGen Mission Service Requirements, the System Information Modernization initiative...

  20. Automated Car Park Management System

    Science.gov (United States)

    Fabros, J. P.; Tabañag, D.; Espra, A.; Gerasta, O. J.

    2015-06-01

    This study aims to develop a prototype for an Automated Car Park Management System that will increase the quality of service of parking lots through the integration of a smart system that assists motorist in finding vacant parking lot. The research was based on implementing an operating system and a monitoring system for parking system without the use of manpower. This will include Parking Guidance and Information System concept which will efficiently assist motorists and ensures the safety of the vehicles and the valuables inside the vehicle. For monitoring, Optical Character Recognition was employed to monitor and put into list all the cars entering the parking area. All parking events in this system are visible via MATLAB GUI which contain time-in, time-out, time consumed information and also the lot number where the car parks. To put into reality, this system has a payment method, and it comes via a coin slot operation to control the exit gate. The Automated Car Park Management System was successfully built by utilizing microcontrollers specifically one PIC18f4550 and two PIC16F84s and one PIC16F628A.

  1. Ball Bearing Stacking Automation System

    Directory of Open Access Journals (Sweden)

    Shafeequerrahman S . Ahmed

    2013-01-01

    Full Text Available This document is an effort to introduce the concept of automation in small scale industries and or small workshops that are involved in the manufacturing of small objects such as nuts, bolts and ball bearing in this case. This an electromechanical system which includes certain mechanical parts that involves one base stand on which one vertical metallic frame is mounted and hinged to this vertical stand is an in humanized effort seems inadequate in this era making necessary the use of Electronics, Computer in the manufacturing processes leading to the concept of Automated Manufacturing System (AMS.The ball bearing stack automation is an effort in this regard. In our project we go for stack automation for any object for example a ball bearing, be that is still a manual system there. It will be microcontroller based project control system equipped with microcontroller 89C51 from any manufacturer like Atmel or Philips. This could have been easily implemented if a PLC could be used for manufacturing the staking unit but I adopted the microcontroller based system so that some more modification in the system can be effected at will as to use the same hardware .Although a very small object i.e. ball bearig or small nut and fixture will be tried to be stacked, the system with more precision and more power handling capacity could be built for various requirements of the industry. For increasing more control capacity, we can use another module of this series. When the bearing is ready, it will be sent for packing. This is sensed by an inductive sensor. The output will be proceeds by PLC and microcontroller card which will be driving the assembly in order to put it into pads or flaps. This project will also count the total number of bearings to be packed and will display it on a LCD for real time reference and a provision is made using a higher level language using hyper terminal of the computer

  2. An Automated Biological Dosimetry System

    Science.gov (United States)

    Lorch, T.; Bille, J.; Frieben, M.; Stephan, G.

    1986-04-01

    The scoring of structural chromosome aberrations in peripheral human blood lymphocytes can be used in biological dosimetry to estimate the radiation dose which an individual has received. Especially the dicentric chromosome is a rather specific indicator for an exposure to ionizing radiation. For statistical reasons, in the low dose range a great number of cells must be analysed, which is a very tedious task. The resulting high cost of a biological dose estimation limits the application of this method to cases of suspected irradiation for which physical dosimetry is not possible or not sufficient. Therefore an automated system has been designed to do the major part of the routine work. It uses a standard light microscope with motorized scanning stage, a Plumbicon TV-camera, a real-time hardware preprocessor, a binary and a grey level image buffer system. All computations are performed by a very powerful multi-microprocessor-system (POLYP) based on a MIMD-architecture. The task of the automated system can be split in finding the metaphases (see Figure 1) at low microscope magnification and scoring dicentrics at high magnification. The metaphase finding part has been completed and is now in routine use giving good results. The dicentric scoring part is still under development.

  3. 全自动血培养系统在外伤性眼内炎的临床应用%Clinical application of automated blood culture system in traumatic endophthalmitis

    Institute of Scientific and Technical Information of China (English)

    任玉玲; 薛黎萍; 刘春林; 肖丽波

    2012-01-01

    Objective To evaluate the clinical application of BacT/ALERT 3D automated blood culture system in traumatic endophthalmitis.Methods A total of 113 vitreous specimens of traumatic endophthalmitis were collected by BacT/ALERT PF pediatric blood culture bottle,detected by BacT/ALERT 3D automated blood culture system and analysed by Vitek-2 compact.We evaluated the positive rate,time to show positive,the types of microorganisms.Results In a total of 113 cultured vitreous specimens,81 cases were positive.Positive rate was 71.7%.Grampositive microorganisms accounted for 62.9% of the positive culture results.Gramnegative microorganisms accounted for 34.6% and fungi accounted for 2.5%.The shortest time to show positive was 4h.Conclusion The automated blood culture system has been widely used in blood and body fluid culture.The application of the automated blood culture for endophthalmitis can raise the positive detection rate,reduce the detection time to show positive and increase the types of microorganisms detected.%目的 评价全自动血培养系统( BacT/ALERT 3 D)在外伤性眼内炎的临床应用.方法 外伤性眼内炎113例(113眼)的玻璃体液进行病原菌培养,用中和抗生素儿童培养瓶( BacT/A-LERT PF)采集标本,全自动血培养系统进行病原菌培养,Vitek-2 compact进行菌种鉴定和药敏试验,对检出阳性者,分析阳性率和病原菌种类.结果 113份玻璃体液标本检出病原微生物81例,阳性率为71.7%,其中革兰阳性细菌占62.9%,革兰阴性细菌占34.6%,真菌占2.5%.最快检出时间为4h.结论 全自动血培养系统应用于外伤性眼内炎提高了玻璃体液病原菌培养的阳性率,缩短阳性检出时间,检出病原菌种类多,结果准确.

  4. Rapid Automated Mission Planning System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is an automated UAS mission planning system that will rapidly identify emergency (contingency) landing sites, manage contingency routing, and...

  5. Automated Contingency Management for Propulsion Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — Increasing demand for improved reliability and survivability of mission-critical systems is driving the development of health monitoring and Automated Contingency...

  6. Automated Periodontal Diseases Classification System

    Directory of Open Access Journals (Sweden)

    Aliaa A. A. Youssif

    2012-01-01

    Full Text Available This paper presents an efficient and innovative system for automated classification of periodontal diseases, The strength of our technique lies in the fact that it incorporates knowledge from the patients' clinical data, along with the features automatically extracted from the Haematoxylin and Eosin (H&E stained microscopic images. Our system uses image processing techniques based on color deconvolution, morphological operations, and watershed transforms for epithelium & connective tissue segmentation, nuclear segmentation, and extraction of the microscopic immunohistochemical features for the nuclei, dilated blood vessels & collagen fibers. Also, Feedforward Backpropagation Artificial Neural Networks are used for the classification process. We report 100% classification accuracy in correctly identifying the different periodontal diseases observed in our 30 samples dataset.

  7. Performance modeling of automated manufacturing systems

    Science.gov (United States)

    Viswanadham, N.; Narahari, Y.

    A unified and systematic treatment is presented of modeling methodologies and analysis techniques for performance evaluation of automated manufacturing systems. The book is the first treatment of the mathematical modeling of manufacturing systems. Automated manufacturing systems are surveyed and three principal analytical modeling paradigms are discussed: Markov chains, queues and queueing networks, and Petri nets.

  8. How to Evaluate Integrated Library Automation Systems.

    Science.gov (United States)

    Powell, James R.; Slach, June E.

    1985-01-01

    This paper describes methodology used in compiling a list of candidate integrated library automation systems at a corporate technical library. Priorities for automation, identification of candidate systems, the filtering process, information for suppliers, software and hardware considerations, on-site evaluations, and final system selection are…

  9. Automated Information System (AIS) Alarm System

    Energy Technology Data Exchange (ETDEWEB)

    Hunteman, W.

    1997-05-01

    The Automated Information Alarm System is a joint effort between Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratory to demonstrate and implement, on a small-to-medium sized local area network, an automated system that detects and automatically responds to attacks that use readily available tools and methodologies. The Alarm System will sense or detect, assess, and respond to suspicious activities that may be detrimental to information on the network or to continued operation of the network. The responses will allow stopping, isolating, or ejecting the suspicious activities. The number of sensors, the sensitivity of the sensors, the assessment criteria, and the desired responses may be set by the using organization to meet their local security policies.

  10. Automated Computer Access Request System

    Science.gov (United States)

    Snook, Bryan E.

    2010-01-01

    The Automated Computer Access Request (AutoCAR) system is a Web-based account provisioning application that replaces the time-consuming paper-based computer-access request process at Johnson Space Center (JSC). Auto- CAR combines rules-based and role-based functionality in one application to provide a centralized system that is easily and widely accessible. The system features a work-flow engine that facilitates request routing, a user registration directory containing contact information and user metadata, an access request submission and tracking process, and a system administrator account management component. This provides full, end-to-end disposition approval chain accountability from the moment a request is submitted. By blending both rules-based and rolebased functionality, AutoCAR has the flexibility to route requests based on a user s nationality, JSC affiliation status, and other export-control requirements, while ensuring a user s request is addressed by either a primary or backup approver. All user accounts that are tracked in AutoCAR are recorded and mapped to the native operating system schema on the target platform where user accounts reside. This allows for future extensibility for supporting creation, deletion, and account management directly on the target platforms by way of AutoCAR. The system s directory-based lookup and day-today change analysis of directory information determines personnel moves, deletions, and additions, and automatically notifies a user via e-mail to revalidate his/her account access as a result of such changes. AutoCAR is a Microsoft classic active server page (ASP) application hosted on a Microsoft Internet Information Server (IIS).

  11. Automation for System Safety Analysis

    Science.gov (United States)

    Malin, Jane T.; Fleming, Land; Throop, David; Thronesbery, Carroll; Flores, Joshua; Bennett, Ted; Wennberg, Paul

    2009-01-01

    This presentation describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

  12. Development and automation of photobioreactors for microalgae intensive cultures for the use in industrial gas studies

    OpenAIRE

    Debelius, Bibiana; Hernández, Cristina; Gurgel, H.; Bueno, Alicia; Ponce, Rocío; Ortega, Teodora; Gómez-Parra, Abelardo; Lubián, Luis M.; Forja, Jesús M.

    2011-01-01

    Although photobioreactors provide much more advantages over open cultivation systems, still more work has to be done in making them cost effective to set up and to operate than conventional pipe reactors and which give high algae yields. This study develops the design of two automation tubular photobioreactors of 550 L for intensive microalgae cultures.

  13. Partial Automated Alignment and Integration System

    Science.gov (United States)

    Kelley, Gary Wayne (Inventor)

    2014-01-01

    The present invention is a Partial Automated Alignment and Integration System (PAAIS) used to automate the alignment and integration of space vehicle components. A PAAIS includes ground support apparatuses, a track assembly with a plurality of energy-emitting components and an energy-receiving component containing a plurality of energy-receiving surfaces. Communication components and processors allow communication and feedback through PAAIS.

  14. A FRAMEWORK FOR AUTOMATED CHANGE DETECTION SYSTEM

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    To enhance the ability of remote sensing system to provide accurate,timely,and c omplete geo_spatial information at regional or global scale,an automated change detection system has been and will continue to be one of the important and chall enging problems in remote sensing.In this paper,the authors propose a framework for auto mated change detection system at landscape level using various geo_spatial data sources including multi_sensor remotely sensed imagery and ancillary data layers .In this framework,database is the central part and some associated techniques a re discussed.These techniques includes five subsystems:automated feature_based i mage registration,automated change finding,automated change feature extraction a nd identification,intelligent change recognition,change accuracy assessment and database updating and visualization.

  15. Influence of Cultural, Organizational, and Automation Capability on Human Automation Trust: A Case Study of Auto-GCAS Experimental Test Pilots

    Science.gov (United States)

    Koltai, Kolina; Ho, Nhut; Masequesmay, Gina; Niedober, David; Skoog, Mark; Cacanindin, Artemio; Johnson, Walter; Lyons, Joseph

    2014-01-01

    This paper discusses a case study that examined the influence of cultural, organizational and automation capability upon human trust in, and reliance on, automation. In particular, this paper focuses on the design and application of an extended case study methodology, and on the foundational lessons revealed by it. Experimental test pilots involved in the research and development of the US Air Force's newly developed Automatic Ground Collision Avoidance System served as the context for this examination. An eclectic, multi-pronged approach was designed to conduct this case study, and proved effective in addressing the challenges associated with the case's politically sensitive and military environment. Key results indicate that the system design was in alignment with pilot culture and organizational mission, indicating the potential for appropriate trust development in operational pilots. These include the low-vulnerability/ high risk nature of the pilot profession, automation transparency and suspicion, system reputation, and the setup of and communications among organizations involved in the system development.

  16. Automated imaging system for single molecules

    Science.gov (United States)

    Schwartz, David Charles; Runnheim, Rodney; Forrest, Daniel

    2012-09-18

    There is provided a high throughput automated single molecule image collection and processing system that requires minimal initial user input. The unique features embodied in the present disclosure allow automated collection and initial processing of optical images of single molecules and their assemblies. Correct focus may be automatically maintained while images are collected. Uneven illumination in fluorescence microscopy is accounted for, and an overall robust imaging operation is provided yielding individual images prepared for further processing in external systems. Embodiments described herein are useful in studies of any macromolecules such as DNA, RNA, peptides and proteins. The automated image collection and processing system and method of same may be implemented and deployed over a computer network, and may be ergonomically optimized to facilitate user interaction.

  17. Digital microfluidics for automated hanging drop cell spheroid culture.

    Science.gov (United States)

    Aijian, Andrew P; Garrell, Robin L

    2015-06-01

    Cell spheroids are multicellular aggregates, grown in vitro, that mimic the three-dimensional morphology of physiological tissues. Although there are numerous benefits to using spheroids in cell-based assays, the adoption of spheroids in routine biomedical research has been limited, in part, by the tedious workflow associated with spheroid formation and analysis. Here we describe a digital microfluidic platform that has been developed to automate liquid-handling protocols for the formation, maintenance, and analysis of multicellular spheroids in hanging drop culture. We show that droplets of liquid can be added to and extracted from through-holes, or "wells," and fabricated in the bottom plate of a digital microfluidic device, enabling the formation and assaying of hanging drops. Using this digital microfluidic platform, spheroids of mouse mesenchymal stem cells were formed and maintained in situ for 72 h, exhibiting good viability (>90%) and size uniformity (% coefficient of variation screen was performed on human colorectal adenocarcinoma spheroids to demonstrate the ability to recapitulate physiologically relevant phenomena such as insulin-induced drug resistance. With automatable and flexible liquid handling, and a wide range of in situ sample preparation and analysis capabilities, the digital microfluidic platform provides a viable tool for automating cell spheroid culture and analysis.

  18. Honeywell Modular Automation System Computer Software Documentation

    Energy Technology Data Exchange (ETDEWEB)

    CUNNINGHAM, L.T.

    1999-09-27

    This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

  19. Saturn facility oil transfer automation system

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, Nathan R.; Thomas, Rayburn Dean; Lewis, Barbara Ann; Malagon, Hector Ricardo.

    2014-02-01

    The Saturn accelerator, owned by Sandia National Laboratories, has been in operation since the early 1980s and still has many of the original systems. A critical legacy system is the oil transfer system which transfers 250,000 gallons of transformer oil from outside storage tanks to the Saturn facility. The oil transfer system was iden- ti ed for upgrade to current technology standards. Using the existing valves, pumps, and relay controls, the system was automated using the National Instruments cRIO FGPA platform. Engineered safety practices, including a failure mode e ects analysis, were used to develop error handling requirements. The uniqueness of the Saturn Oil Automated Transfer System (SOATS) is in the graphical user interface. The SOATS uses an HTML interface to communicate to the cRIO, creating a platform independent control system. The SOATS was commissioned in April 2013.

  20. Automated drawing system of quantum energy levels

    Science.gov (United States)

    Stampoultzis, M.; Sinatkas, J.; Tsakstara, V.; Kosmas, T. S.

    2014-03-01

    The purpose of this work is to derive an automated system that provides advantageous drawings of energy spectra for quantum systems (nuclei, atoms, molecules, etc.) required in various physical sciences. The automation involves the development of appropriate computational code and graphical imaging system based on raw data insertion, theoretical calculations and experimental or bibliographic data insertion. The system determines the appropriate scale to depict graphically with the best possible way in the available space. The presently developed code operates locally and the results are displayed on the screen and can be exported to a PostScript file. We note its main features to arrange and visualize in the available space the energy levels with their identity, taking care the existence in the final diagram the least auxiliary deviations. Future improvements can be the use of Java and the availability on the Internet. The work involves the automated plotting of energy levels in molecules, atoms, nuclei and other types of quantized energy spectra. The automation involves the development of an appropriate computational code and graphical imaging system.

  1. A companion agent for automated training systems

    NARCIS (Netherlands)

    Buiël, E.F.T.; Lubbers, J.

    2007-01-01

    TNO Defence, Security & Safety has a long history of applied research in the area of automated simulator-based training by means of Computer-Assisted Instruction (CAI). Traditionally, a CAI system does not enable a true dialogue between the learner and the virtual instructor. Most frequently, the sy

  2. ACSES, An Automated Computer Science Education System.

    Science.gov (United States)

    Nievergelt, Jurg; And Others

    A project to accommodate the large and increasing enrollment in introductory computer science courses by automating them with a subsystem for computer science instruction on the PLATO IV Computer-Based Education system at the University of Illinois was started. The subsystem was intended to be used for supplementary instruction at the University…

  3. Traffic Flow Control In Automated Highway Systems

    OpenAIRE

    Alvarez, Luis; Horowitz, Roberto

    1997-01-01

    This report studies the problem of traffic control in the Automated Highway System (AHS) hierarchical architecture of the California PATH program. A link layer controller for the PATH AHS architecture is presented. It is shown that the proposed control laws stabilize the vehicular density and flow around predetermined profiles.

  4. An automated system for terrain database construction

    Science.gov (United States)

    Johnson, L. F.; Fretz, R. K.; Logan, T. L.; Bryant, N. A.

    1987-01-01

    An automated Terrain Database Preparation System (TDPS) for the construction and editing of terrain databases used in computerized wargaming simulation exercises has been developed. The TDPS system operates under the TAE executive, and it integrates VICAR/IBIS image processing and Geographic Information System software with CAD/CAM data capture and editing capabilities. The terrain database includes such features as roads, rivers, vegetation, and terrain roughness.

  5. Automated Laser Seeker Performance Evaluation System (ALSPES)

    Science.gov (United States)

    Martin, Randal G.; Robinson, Elisa L.

    1988-01-01

    The Automated Laser Seeker Performance Evaluation System (ALSPES), which supports the Hellfire missile and Copperhead projectile laser seekers, is discussed. The ALSPES capabilities in manual and automatic operation are described, and the ALSPES test hardware is examined, including the computer system, the laser/attenuator, optics systems, seeker test fixture, and the measurement and test equipment. The calibration of laser energy and test signals in ALSPES is considered.

  6. 22 CFR 120.30 - The Automated Export System (AES).

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false The Automated Export System (AES). 120.30... DEFINITIONS § 120.30 The Automated Export System (AES). The Automated Export System (AES) is the Department of... system for collection of export data for the Department of State. In accordance with this subchapter...

  7. Adoption of automated livestock production systems in Northern Europe

    DEFF Research Database (Denmark)

    Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

    2014-01-01

    In the last decades the development of automated systems in livestock production has gained increasing interest among farmers. A combined use of computers and sensor systems has lead the development into new research areas with automated milking systems, grain drying systems and automated feeding...

  8. A New Autom ated Fingerprint Identification System

    Institute of Scientific and Technical Information of China (English)

    沈学宁; 程民德; 等

    1989-01-01

    A new automated fingerpring identification system is proposed.In this system,based on some local properties of digital image,the shape and minutiae features of fingerprint can be extracted from the grey level image without binarizing and thinning.In query,a latent fingerprint can be matched with the filed fingerprints by shape and/or minutiae features.Matching by shape features is much faster than by minutiae.

  9. Automating software design system DESTA

    Science.gov (United States)

    Lovitsky, Vladimir A.; Pearce, Patricia D.

    1992-01-01

    'DESTA' is the acronym for the Dialogue Evolutionary Synthesizer of Turnkey Algorithms by means of a natural language (Russian or English) functional specification of algorithms or software being developed. DESTA represents the computer-aided and/or automatic artificial intelligence 'forgiving' system which provides users with software tools support for algorithm and/or structured program development. The DESTA system is intended to provide support for the higher levels and earlier stages of engineering design of software in contrast to conventional Computer Aided Design (CAD) systems which provide low level tools for use at a stage when the major planning and structuring decisions have already been taken. DESTA is a knowledge-intensive system. The main features of the knowledge are procedures, functions, modules, operating system commands, batch files, their natural language specifications, and their interlinks. The specific domain for the DESTA system is a high level programming language like Turbo Pascal 6.0. The DESTA system is operational and runs on an IBM PC computer.

  10. 15 CFR 758.2 - Automated Export System (AES).

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Automated Export System (AES). 758.2... CLEARANCE REQUIREMENTS § 758.2 Automated Export System (AES). The Census Bureau's Foreign Trade Statistics...) electronically using the Automated Export System (AES). In order to use AES, you must apply directly to...

  11. 21 CFR 864.5620 - Automated hemoglobin system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated hemoglobin system. 864.5620 Section 864....5620 Automated hemoglobin system. (a) Identification. An automated hemoglobin system is a fully... hemoglobin content of human blood. (b) Classification. Class II (performance standards)....

  12. A System For Automated Medical Photography

    Science.gov (United States)

    Tivattanasuk, Eva S.; Kaczoroski, Anthony J.; Rhodes, Michael L.

    1988-06-01

    A system is described that electronically controls the medical photography for a computed tomography (CT) scanner system. Multiple CT exams can be photographed with each image automatically adjusted to a specific gamma table presentation and positioned to any film location within a given film format. Our approach uses a library that can store 24 CT exam photography protocols. Library entries can be added, deleted, or edited. Mixed film formats, multiple image types, and automated annotation capabilities allow all CT exams to be filmed at our clinic cost-effectively and unattended. Using this automated approach to CT exam photography, one full-time equivalent CT technologist has been saved from the operational cost of our center. We outline the film protocol database, illustrate protocol options and by example, show the flexibility of this approach. Features of this system illustrate essential components of any such approach.

  13. Home Automation System Using Capacitive Touchscreen

    Directory of Open Access Journals (Sweden)

    Yash Inaniya

    2014-06-01

    Full Text Available Technology has been constantly evolving and with the advent of touchscreen in human life , devices are much easier and simple to operate. This work is mainly focused on building home automation system which is more user friendly and thus can be operated by anyone. Earlier home automation systems were completely mechanically operated and thus required a lot of maintenance and were costly also. Now that human and computer interaction has been developed into a more wide and sophisticated field , designing and operating of intelligence system has been more user friendly than ever. Home automation is a system that helps a user to operate switching various appliances and lighting devices from a single input. The touchscreen used as input is much simpler to operate. Touchscreen has been widely accepted as the most comfortable input to be provided to the user. Not only they are easy to operate but they also give a sense of personal involvement which the user always appreciate. The materials used in this system are easily available in the local market so that the touch screen sytem is cost effective .

  14. Analysis of the Positive Pathogenic Bacteria and the Alarm Time by Automated Blood Culture System%全自动血培养仪阳性病原菌种类及报警时间分析

    Institute of Scientific and Technical Information of China (English)

    廖忠; 叶杰; 陈振南

    2013-01-01

    Objective:To analyse the positive pathogenic bacteria of the blood culture and the alarm time.Method:A total of 2180 blood specimens were collected from April 2010 to April 2012 in our hospital and the specimens were detected by BD BACTEC 9120 automated blood culture system.Analyse the bacterial species and alarm time of the blood specimens in aerobic and anaerobic bottles.Result:282 blood culture positive samples were isolated from the 2180 blood culture samples,which was true positive in 263 cases.The positive rate of the blood culture was 12.1%,which 269 strains of pathogens were isolated,including Gram-positive cocci accounted for 40.1%,gram negative bacilli 57.2%,fungi 2.6%.However the positive rate was just 15.6% only from aerobic bottles and 5.7% only from anaerobic ones,and 20.9% from both of the two bottles.The fastest positive time was 5.02 h, during the test,the number of positive reactions accounted for 69.1% in 24 hours,92.5% in 48 hours,and 97% in 72 hours.The false positive rate was 0.87%, and the false negative rate was 0.52%.Conclusion:Application of both aerobic and anaerobic cultivation detected by BD BACTEC 9120 automated blood culture system can improve the blood culture positive rate,shorten the positive detection time.%  目的:分析血培养阳性病原菌种类及仪器报警时间.方法:用 BD BACTEC 9120全自动血培养仪检测笔者所在医院2010年4月-2012年4月共计2180份血标本,分析血标本在需氧瓶和厌氧瓶中生长细菌的种类及仪器报警时间.结果:2180例血培养标本中报警阳性282例,其中真阳性263例,阳性率为12.1%.分离出细菌269株,其中革兰阳性球菌占40.1%,革兰阴性杆菌占57.2%,真菌占2.6%.其中仅需氧瓶报阳的阳性率为6.3%,仅厌氧瓶报阳的阳性率为2.8%,需氧瓶及厌氧瓶均报阳的阳性率为2.9%;最快阳性检出时间为5.02 h,24 h内检出的阳性数占69.1%,48 h 检出的阳性数占92.5%,72 h 检出的阳性数占97.0%

  15. Automated Water-Purification System

    Science.gov (United States)

    Ahlstrom, Harlow G.; Hames, Peter S.; Menninger, Fredrick J.

    1988-01-01

    Reverse-osmosis system operates and maintains itself with minimal human attention, using programmable controller. In purifier, membranes surround hollow cores through which clean product water flows out of reverse-osmosis unit. No chemical reactions or phase changes involved. Reject water, in which dissolved solids concentrated, emerges from outer membrane material on same side water entered. Flow controls maintain ratio of 50 percent product water and 50 percent reject water. Membranes expected to last from 3 to 15 years.

  16. The Evaluation of Automated Systems

    Science.gov (United States)

    2007-11-02

    enable mission focused planning. This technology package was named, Distributed Analysis and Visualization Infrastructure for C4I, Da Vinci . Viecore...commanders and staffs to focus on the higher-level concepts.29 Originally, Viecore developed the Da Vinci technology as a self-contained application...the Division Capstone Exercise (DCX). The Da Vinci technology using the new operating system was called CAPES. The CAPES Reference Manual

  17. Multiplatform automated system for monitoring and sprinkler irrigation control

    Directory of Open Access Journals (Sweden)

    PINTO, M. L.

    2016-06-01

    Full Text Available The automation systems together with web and mobile control is a facilitator of the various processes in several areas, among them the agricultural sector. Specically in the irrigation management, the lowest cost technology is not able to satisfy the farmer's needs, which are the correct water supply to plants and remote monitoring of the irrigation. The objective of this paper is to present a system for controlling and monitoring irrigation with a multiplatform support for both desktop and web/mobile. The system is designed to realize automatic irrigation management in order to provide the exact amount of water needed for culture, avoiding water stress both the culture and the waste of resources such as water and electricity. Additionally, the system allows remote monitoring from anywhere by means of a computer and/or mobile device by internet. This work was developed during the undergraduate mentorship of the authors.

  18. Automated microscopy system for peripheral blood cells

    Science.gov (United States)

    Boev, Sergei F.; Sazonov, Vladimir V.; Kozinets, Gennady I.; Pogorelov, Valery M.; Gusev, Alexander A.; Korobova, Farida V.; Vinogradov, Alexander G.; Verdenskaya, Natalya V.; Ivanova, Irina A.

    2000-11-01

    The report describes the instrument ASPBS (Automated Screening of Peripheral Blood Cells) designed for an automated analysis of dry blood smears. The instrument is based on computer microscopy and uses dry blood smears prepared according to the standard Romanovskii-Giemza procedure. In comparison with the well-known flow cytometry systems, our instrument provides more detailed information and offers an opporunity of visualizing final results. The basic performances of the instrument are given. Software of this instrument is based on digital image processing and image recognition procedures. It is pointed out that the instrument can be used as a fairly universal tool in scientific research, public demonstrations, in medical treatment, and in medical education. The principle used as the basis of the instrument appeared adequate for creating an instrument version serviceable even during space flights where standard manual procedures and flow cytometry systems fail. The benefit of the use of the instrument in clinical laboratories is described.

  19. Automated Loads Analysis System (ATLAS)

    Science.gov (United States)

    Gardner, Stephen; Frere, Scot; O’Reilly, Patrick

    2013-01-01

    ATLAS is a generalized solution that can be used for launch vehicles. ATLAS is used to produce modal transient analysis and quasi-static analysis results (i.e., accelerations, displacements, and forces) for the payload math models on a specific Shuttle Transport System (STS) flight using the shuttle math model and associated forcing functions. This innovation solves the problem of coupling of payload math models into a shuttle math model. It performs a transient loads analysis simulating liftoff, landing, and all flight events between liftoff and landing. ATLAS utilizes efficient and numerically stable algorithms available in MSC/NASTRAN.

  20. An automated cleaning system for hospitals

    OpenAIRE

    Griffin, Colin

    2009-01-01

    Insufficient hygienic practices in Irish hospitals coupled with one of the highest number of reported cases of MRSA in Europe have highlighted the need for solutions to aid in the task of cleaning. This automated cleaning system consisted of two robots: a core robot developed separately with navigational and task scheduling capabilities integrated. The cleaning task was carried out by making use of a commercially available Roomba vacuum cleaner which had been adapted to operate in conju...

  1. Control and automation, and energy system engineering

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tai-hoon [Hannam Univ., Daejeon (Korea, Republic of); Adeli, Hojjat [Ohio State Univ., Columbus, OH (United States); Stoica, Adrian [Jet Propulsion Laboratory, Pasadena, CA (United States); Kang, Byeong-Ho (eds.) [Tasmania Univ., Hobart, TAS (Australia)

    2011-07-01

    This book comprises selected papers of the International Conferences, CA and CES3 2011, held as Part of the Future Generation Information Technology Conference, FGIT 2011, in Conjunction with GDC 2011, Jeju Island, Korea, in December 2011. The papers presented were carefully reviewed and selected from numerous submissions and focused on the various aspects of control and automation, and circuits, control, communication, electricity, electronics, energy, system, signal and simulation. (orig.)

  2. 21 CFR 864.5700 - Automated platelet aggregation system.

    Science.gov (United States)

    2010-04-01

    ... addition of an aggregating reagent to a platelet-rich plasma. (b) Classification. Class II (performance... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated platelet aggregation system. 864.5700... § 864.5700 Automated platelet aggregation system. (a) Identification. An automated platelet...

  3. Office of Coast Survey's Automated Wreck and Obstruction Information System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Automated Wreck and Obstruction Information System (AWOIS) is an automated file that contains information on wrecks and obstructions, and other significant...

  4. Laboratory automation in clinical bacteriology: what system to choose?

    Science.gov (United States)

    Croxatto, A; Prod'hom, G; Faverjon, F; Rochais, Y; Greub, G

    2016-03-01

    Automation was introduced many years ago in several diagnostic disciplines such as chemistry, haematology and molecular biology. The first laboratory automation system for clinical bacteriology was released in 2006, and it rapidly proved its value by increasing productivity, allowing a continuous increase in sample volumes despite limited budgets and personnel shortages. Today, two major manufacturers, BD Kiestra and Copan, are commercializing partial or complete laboratory automation systems for bacteriology. The laboratory automation systems are rapidly evolving to provide improved hardware and software solutions to optimize laboratory efficiency. However, the complex parameters of the laboratory and automation systems must be considered to determine the best system for each given laboratory. We address several topics on laboratory automation that may help clinical bacteriologists to understand the particularities and operative modalities of the different systems. We present (a) a comparison of the engineering and technical features of the various elements composing the two different automated systems currently available, (b) the system workflows of partial and complete laboratory automation, which define the basis for laboratory reorganization required to optimize system efficiency, (c) the concept of digital imaging and telebacteriology, (d) the connectivity of laboratory automation to the laboratory information system, (e) the general advantages and disadvantages as well as the expected impacts provided by laboratory automation and (f) the laboratory data required to conduct a workflow assessment to determine the best configuration of an automated system for the laboratory activities and specificities.

  5. NDAUTO:An Experimental Software Automation System

    Institute of Scientific and Technical Information of China (English)

    徐家福; 戴敏; 等

    1989-01-01

    This paper describer the design and implementation of an experimental software automation system(NDAUTO).By combining the transformational and procedural approaches in software gutomation,the system can tansform software unctional specifications written in a graphical specification language GSPEC to executable programs sutomatically,The equivalence between a specification and its corresponding program can be guaranteed by the system,and the correctness of the specification can also be validated.The main new points of the work lie in the design of the specification languange,the transformation mechanism and the correctness validation of the specification.

  6. An engineered approach to stem cell culture: automating the decision process for real-time adaptive subculture of stem cells.

    Science.gov (United States)

    Ker, Dai Fei Elmer; Weiss, Lee E; Junkers, Silvina N; Chen, Mei; Yin, Zhaozheng; Sandbothe, Michael F; Huh, Seung-il; Eom, Sungeun; Bise, Ryoma; Osuna-Highley, Elvira; Kanade, Takeo; Campbell, Phil G

    2011-01-01

    Current cell culture practices are dependent upon human operators and remain laborious and highly subjective, resulting in large variations and inconsistent outcomes, especially when using visual assessments of cell confluency to determine the appropriate time to subculture cells. Although efforts to automate cell culture with robotic systems are underway, the majority of such systems still require human intervention to determine when to subculture. Thus, it is necessary to accurately and objectively determine the appropriate time for cell passaging. Optimal stem cell culturing that maintains cell pluripotency while maximizing cell yields will be especially important for efficient, cost-effective stem cell-based therapies. Toward this goal we developed a real-time computer vision-based system that monitors the degree of cell confluency with a precision of 0.791±0.031 and recall of 0.559±0.043. The system consists of an automated phase-contrast time-lapse microscope and a server. Multiple dishes are sequentially imaged and the data is uploaded to the server that performs computer vision processing, predicts when cells will exceed a pre-defined threshold for optimal cell confluency, and provides a Web-based interface for remote cell culture monitoring. Human operators are also notified via text messaging and e-mail 4 hours prior to reaching this threshold and immediately upon reaching this threshold. This system was successfully used to direct the expansion of a paradigm stem cell population, C2C12 cells. Computer-directed and human-directed control subcultures required 3 serial cultures to achieve the theoretical target cell yield of 50 million C2C12 cells and showed no difference for myogenic and osteogenic differentiation. This automated vision-based system has potential as a tool toward adaptive real-time control of subculturing, cell culture optimization and quality assurance/quality control, and it could be integrated with current and developing robotic cell

  7. HVAC control system for building automation

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. S.; Song, I. T.; Cho, S. W.; Cho, J. H. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-11-01

    The purpose of the project is to design and construction of the HVAC control system for building automation. The HVAC control system can accomplish the function which are the optimum operation condition and operation time, and the operation pattern analysis. Also, this control system can effectively manage energy saving, building environment control, facilities safety monitoring etc. The HVAC control system consisted of the central control and monitoring system (CCMS) and the direct digital controller (DDC). 1) CCMS: -Main Compute -Graphic Board -Printer -Console Desk -Intercom. 2) DDC : -IMC-M (System Control Unit Main Module) -IMC-1,2,3,4(System Control Unit Module). Following this report will be used important data for the design, construction, operation and maintenance of the HVAC control system. 12 refs., 6 figs., 9 tabs. (Author)

  8. Development of a nursing automated documentation system.

    Science.gov (United States)

    Holmes, S B; Fuhrmann, M; Ivancin, L

    1992-01-01

    As hospital length of stay has decreased and patient acuity has increased, the nurse is confronted daily with the challenge of managing time between patient care and documentation. Documentation of care has consistently been a time-consuming and frustrating part of nursing practice. The nursing shortage has only compounded this problem. St. Joseph's Hospital has creatively begun to facilitate documentation by developing a Nursing Automated Documentation System (NADS) in collaboration with CliniCom, Inc. of Boulder, Colorado. This article documents the development and implementation of the system.

  9. IT Asset Management of Industrial Automation Systems

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The installation and administration of large heterogeneous IT infrastructures, for enterprises as well industrial automation systems,are becoming more and more complex and time consuming. The growing number of interconnections between networks, the development of new intelligent IT devices, and increasingly sophisticated computer hardware and software, require in-depth knowledge of IT protocols,interfaces, and standards to manage such infrastructures. The exponential growth of the World Wide Web and new IT technologies enable further integration of software and hardware systems across company boundaries.

  10. MDSplus automated build and distribution system

    Energy Technology Data Exchange (ETDEWEB)

    Fredian, T., E-mail: twf@psfc.mit.edu [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States); Stillerman, J. [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States); Manduchi, G. [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy)

    2014-05-15

    Support of the MDSplus data handling system has been enhanced by the addition of an automated build system which does nightly builds of MDSplus for many computer platforms producing software packages which can now be downloaded using a web browser or via package repositories suitable for automatic updating. The build system was implemented using an extensible continuous integration server product called Hudson which schedules software builds on a collection of VMware based virtual machines. New releases are created based on updates via the MDSplus cvs code repository and versioning are managed using cvs tags and branches. Currently stable, beta and alpha releases of MDSplus are maintained for eleven different platforms including Windows, MacOSX, RedHat Enterprise Linux, Fedora, Ubuntu and Solaris. For some of these platforms, MDSplus packaging has been broken into functional modules so users can pick and choose which MDSplus features they want to install. An added feature to the latest Linux based platforms is the use of package dependencies. When installing MDSplus from the package repositories, any additional required packages used by MDSplus will be installed automatically greatly simplifying the installation of MDSplus. This paper will describe the MDSplus package automated build and distribution system.

  11. Real time control engineering systems and automation

    CERN Document Server

    Ng, Tian Seng

    2016-01-01

    This book covers the two broad areas of the electronics and electrical aspects of control applications, highlighting the many different types of control systems of relevance to real-life control system design. The control techniques presented are state-of-the-art. In the electronics section, readers will find essential information on microprocessor, microcontroller, mechatronics and electronics control. The low-level assembly programming language performs basic input/output control techniques as well as controlling the stepper motor and PWM dc motor. In the electrical section, the book addresses the complete elevator PLC system design, neural network plant control, load flow analysis, and process control, as well as machine vision topics. Illustrative diagrams, circuits and programming examples and algorithms help to explain the details of the system function design. Readers will find a wealth of computer control and industrial automation practices and applications for modern industries, as well as the educat...

  12. Emergency Centre Organization and Automated Triage System

    CERN Document Server

    Golding, Dan; Marwala, Tshilidzi

    2008-01-01

    The excessive rate of patients arriving at accident and emergency centres is a major problem facing South African hospitals. Patients are prioritized for medical care through a triage process. Manual systems allow for inconsistency and error. This paper proposes a novel system to automate accident and emergency centre triage and uses this triage score along with an artificial intelligence estimate of patient-doctor time to optimize the queue order. A fuzzy inference system is employed to triage patients and a similar system estimates the time but adapts continuously through fuzzy Q-learning. The optimal queue order is found using a novel procedure based on genetic algorithms. These components are integrated in a simple graphical user interface. Live tests could not be performed but simulations reveal that the average waiting time can be reduced by 48 minutes and priority is given to urgent patients

  13. Wireless ZigBee home automation system

    Science.gov (United States)

    Craciunescu, Razvan; Halunga, Simona; Fratu, Octavian

    2015-02-01

    The home automation system concept existed for many years but in the last decade, due to the rapid development of sensors and wireless technologies, a large number of various such "intelligent homes" have been developed. The purpose of the present paper is to demonstrate the flexibility, reliability and affordability of home automation projects, based on a simple and affordable implementation. A wireless sensing and control system have been developed and tested, having a number of basic functionalities such as switching on/off the light according to ambient lighting and turning on/off the central heating. The system has been built around low power microcontrollers and ZigBee modems for wireless communication, using a set of Vishay 640 thermistor sensors for temperature measurements and Vishay LDR07 photo-resistor for humidity measurements. A trigger is activated when the temperature or light measurements are above/below a given threshold and a command is transmitted to the central unit through the ZigBee radio module. All the data processing is performed by a low power microcontroller both at the sensing device and at the control unit.

  14. An Automated Solar Synoptic Analysis Software System

    Science.gov (United States)

    Hong, S.; Lee, S.; Oh, S.; Kim, J.; Lee, J.; Kim, Y.; Lee, J.; Moon, Y.; Lee, D.

    2012-12-01

    We have developed an automated software system of identifying solar active regions, filament channels, and coronal holes, those are three major solar sources causing the space weather. Space weather forecasters of NOAA Space Weather Prediction Center produce the solar synoptic drawings as a daily basis to predict solar activities, i.e., solar flares, filament eruptions, high speed solar wind streams, and co-rotating interaction regions as well as their possible effects to the Earth. As an attempt to emulate this process with a fully automated and consistent way, we developed a software system named ASSA(Automated Solar Synoptic Analysis). When identifying solar active regions, ASSA uses high-resolution SDO HMI intensitygram and magnetogram as inputs and providing McIntosh classification and Mt. Wilson magnetic classification of each active region by applying appropriate image processing techniques such as thresholding, morphology extraction, and region growing. At the same time, it also extracts morphological and physical properties of active regions in a quantitative way for the short-term prediction of flares and CMEs. When identifying filament channels and coronal holes, images of global H-alpha network and SDO AIA 193 are used for morphological identification and also SDO HMI magnetograms for quantitative verification. The output results of ASSA are routinely checked and validated against NOAA's daily SRS(Solar Region Summary) and UCOHO(URSIgram code for coronal hole information). A couple of preliminary scientific results are to be presented using available output results. ASSA will be deployed at the Korean Space Weather Center and serve its customers in an operational status by the end of 2012.

  15. 20 Qs & As on Automated Integrated Library Systems.

    Science.gov (United States)

    Matthews, Joseph R.

    1982-01-01

    This set of summaries of problems and issues pertaining to the selection and implementation of automated integrated library information systems (AILS) deals with such topics as the nature of integrated library systems, the rationale for installing such systems, automated systems operations, available technology, and options for obtaining the…

  16. Automated microinjection system for adherent cells

    Science.gov (United States)

    Youoku, Sachihiro; Suto, Yoshinori; Ando, Moritoshi; Ito, Akio

    2007-07-01

    We have developed an automated microinjection system that can handle more than 500 cells an hour. Microinjection injects foreign agents directly into cells using a micro-capillary. It can randomly introduce agents such as DNA, proteins and drugs into various types of cells. However, conventional methods require a skilled operator and suffer from low throughput. The new automated microinjection techniques we have developed consist of a Petri dish height measuring method and a capillary apex position measuring method. The dish surface height is measured by analyzing the images of cells that adhere to the dish surface. The contrast between the cell images is minimized when the focus plane of an object lens coincides with the dish surface. We have developed an optimized focus searching method with a height accuracy of +/-0.2 um. The capillary apex position detection method consists of three steps: rough, middle, and precise. These steps are employed sequentially to cover capillary displacements of up to +/-2 mm, and to ultimately accomplish an alignment accuracy of less than one micron. Experimental results using this system we developed show that it can introduce fluorescent material (Alexa488) into adherent cells, HEK293, with a success rate of 88.5%.

  17. Evryscope Robotilter automated camera / ccd alignment system

    Science.gov (United States)

    Ratzloff, Jeff K.; Law, Nicholas M.; Fors, Octavi; Ser, Daniel d.; Corbett, Henry T.

    2016-08-01

    We have deployed a new class of telescope, the Evryscope, which opens a new parameter space in optical astronomy - the ability to detect short time scale events across the entire sky simultaneously. The system is a gigapixel-scale array camera with an 8000 sq. deg. field of view, 13 arcsec per pixel sampling, and the ability to detect objects brighter than g = 16 in each 2-minute exposure. The Evryscope is designed to find transiting exoplanets around exotic stars, as well as detect nearby supernovae and provide continuous records of distant relativistic explosions like gamma-ray-bursts. The Evryscope uses commercially available CCDs and optics; the machine and assembly tolerances inherent in the mass production of these parts introduce problematic variations in the lens / CCD alignment which degrades image quality. We have built an automated alignment system (Robotilters) to solve this challenge. In this paper we describe the Robotilter system, mechanical and software design, image quality improvement, and current status.

  18. Integrated system for automated financial document processing

    Science.gov (United States)

    Hassanein, Khaled S.; Wesolkowski, Slawo; Higgins, Ray; Crabtree, Ralph; Peng, Antai

    1997-02-01

    A system was developed that integrates intelligent document analysis with multiple character/numeral recognition engines in order to achieve high accuracy automated financial document processing. In this system, images are accepted in both their grayscale and binary formats. A document analysis module starts by extracting essential features from the document to help identify its type (e.g. personal check, business check, etc.). These features are also utilized to conduct a full analysis of the image to determine the location of interesting zones such as the courtesy amount and the legal amount. These fields are then made available to several recognition knowledge sources such as courtesy amount recognition engines and legal amount recognition engines through a blackboard architecture. This architecture allows all the available knowledge sources to contribute incrementally and opportunistically to the solution of the given recognition query. Performance results on a test set of machine printed business checks using the integrated system are also reported.

  19. A system-level approach to automation research

    Science.gov (United States)

    Harrison, F. W.; Orlando, N. E.

    1984-01-01

    Automation is the application of self-regulating mechanical and electronic devices to processes that can be accomplished with the human organs of perception, decision, and actuation. The successful application of automation to a system process should reduce man/system interaction and the perceived complexity of the system, or should increase affordability, productivity, quality control, and safety. The expense, time constraints, and risk factors associated with extravehicular activities have led the Automation Technology Branch (ATB), as part of the NASA Automation Research and Technology Program, to investigate the use of robots and teleoperators as automation aids in the context of space operations. The ATB program addresses three major areas: (1) basic research in autonomous operations, (2) human factors research on man-machine interfaces with remote systems, and (3) the integration and analysis of automated systems. This paper reviews the current ATB research in the area of robotics and teleoperators.

  20. Saponin, an inhibitory agent of carbon dioxide production by white cells : its use in the microbiologic examination of blood components in an automated bacterial culture system

    NARCIS (Netherlands)

    van Doorne, H; van der Tuuk Adriani, WPA; van de Ven, LI; Bosch, EH; de Natris, T; Sibinga, CTS

    1998-01-01

    BACKGROUND: Blood components with a white cell count >100 x 10(9) per L may cause false-positive results when the BacT/Alert system is used for the microbiologic examination. The effects of different concentrations of saponin on bacterial growth and on carbon dioxide production by blood fractions wi

  1. Automated Safety Incident Surveillance and Tracking System (ASISTS)

    Data.gov (United States)

    Department of Veterans Affairs — The Automated Safety Incident Surveillance and Tracking System (ASISTS) is a repository of Veterans Health Administration (VHA) employee accident data. Many types of...

  2. The Automated Logistics Element Planning System (ALEPS)

    Science.gov (United States)

    Schwaab, Douglas G.

    1992-01-01

    ALEPS, which is being developed to provide the SSF program with a computer system to automate logistics resupply/return cargo load planning and verification, is presented. ALEPS will make it possible to simultaneously optimize both the resupply flight load plan and the return flight reload plan for any of the logistics carriers. In the verification mode ALEPS will support the carrier's flight readiness reviews and control proper execution of the approved plans. It will also support the SSF inventory management system by providing electronic block updates to the inventory database on the cargo arriving at or departing the station aboard a logistics carrier. A prototype drawer packing algorithm is described which is capable of generating solutions for 3D packing of cargo items into a logistics carrier storage accommodation. It is concluded that ALEPS will provide the capability to generate and modify optimized loading plans for the logistics elements fleet.

  3. Cooling system with automated seasonal freeze protection

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Levi A.; Chu, Richard C.; David, Milnes P.; Ellsworth, Jr., Michael J.; Iyengar, Madhusudan K.; Simons, Robert E.; Singh, Prabjit; Zhang, Jing

    2016-05-24

    An automated multi-fluid cooling system and method are provided for cooling an electronic component(s). The cooling system includes a coolant loop, a coolant tank, multiple valves, and a controller. The coolant loop is at least partially exposed to outdoor ambient air temperature(s) during normal operation, and the coolant tank includes first and second reservoirs containing first and second fluids, respectively. The first fluid freezes at a lower temperature than the second, the second fluid has superior cooling properties compared with the first, and the two fluids are soluble. The multiple valves are controllable to selectively couple the first or second fluid into the coolant in the coolant loop, wherein the coolant includes at least the second fluid. The controller automatically controls the valves to vary first fluid concentration level in the coolant loop based on historical, current, or anticipated outdoor air ambient temperature(s) for a time of year.

  4. Automated Formal Verification for PLC Control Systems

    CERN Multimedia

    Fernández Adiego, Borja

    2014-01-01

    Programmable Logic Controllers (PLCs) are widely used devices used in industrial control systems. Ensuring that the PLC software is compliant with its specification is a challenging task. Formal verification has become a recommended practice to ensure the correctness of the safety-critical software. However, these techniques are still not widely applied in industry due to the complexity of building formal models, which represent the system and the formalization of requirement specifications. We propose a general methodology to perform automated model checking of complex properties expressed in temporal logics (e.g. CTL, LTL) on PLC programs. This methodology is based on an Intermediate Model (IM), meant to transform PLC programs written in any of the languages described in the IEC 61131-3 standard (ST, IL, etc.) to different modeling languages of verification tools. This approach has been applied to CERN PLC programs validating the methodology.

  5. Analyzing Automated Instructional Systems: Metaphors from Related Design Professions.

    Science.gov (United States)

    Jonassen, David H.; Wilson, Brent G.

    Noting that automation has had an impact on virtually every manufacturing and information operation in the world, including instructional design (ID), this paper suggests three basic metaphors for automating instructional design activities: (1) computer-aided design and manufacturing (CAD/CAM) systems; (2) expert system advisor systems; and (3)…

  6. Development of a Prototype Automated Sorting System for Plastic Recycling

    Directory of Open Access Journals (Sweden)

    D. A. Wahab

    2006-01-01

    Full Text Available Automated sorting for plastic recyclables has been seen as the way forward in the plastic recycling industry. Automated sorting provides significant improvements in terms of efficiency and consistency in the sorting process. In the case of macro sorting, which is the most common type of automated sorting, efficiency is determined by the mechanical details of the material handling system as well as the detection system. This paper provides a review on the state of-the-art technologies that have been deployed by some of the recycling facilities abroad. The design and development of a cost effective prototype automated system for sorting plastic recyclables is proposed and discussed.

  7. A SEMI-AUTOMATED POINT CLOUD PROCESSING METHODOLOGY FOR 3D CULTURAL HERITAGE DOCUMENTATION

    Directory of Open Access Journals (Sweden)

    C. Ö. Kıvılcım

    2016-06-01

    Full Text Available The preliminary phase in any architectural heritage project is to obtain metric measurements and documentation of the building and its individual elements. On the other hand, conventional measurement techniques require tremendous resources and lengthy project completion times for architectural surveys and 3D model production. Over the past two decades, the widespread use of laser scanning and digital photogrammetry have significantly altered the heritage documentation process. Furthermore, advances in these technologies have enabled robust data collection and reduced user workload for generating various levels of products, from single buildings to expansive cityscapes. More recently, the use of procedural modelling methods and BIM relevant applications for historic building documentation purposes has become an active area of research, however fully automated systems in cultural heritage documentation still remains open. In this paper, we present a semi-automated methodology, for 3D façade modelling of cultural heritage assets based on parametric and procedural modelling techniques and using airborne and terrestrial laser scanning data. We present the contribution of our methodology, which we implemented in an open source software environment using the example project of a 16th century early classical era Ottoman structure, Sinan the Architect’s Şehzade Mosque in Istanbul, Turkey.

  8. a Semi-Automated Point Cloud Processing Methodology for 3d Cultural Heritage Documentation

    Science.gov (United States)

    Kıvılcım, C. Ö.; Duran, Z.

    2016-06-01

    The preliminary phase in any architectural heritage project is to obtain metric measurements and documentation of the building and its individual elements. On the other hand, conventional measurement techniques require tremendous resources and lengthy project completion times for architectural surveys and 3D model production. Over the past two decades, the widespread use of laser scanning and digital photogrammetry have significantly altered the heritage documentation process. Furthermore, advances in these technologies have enabled robust data collection and reduced user workload for generating various levels of products, from single buildings to expansive cityscapes. More recently, the use of procedural modelling methods and BIM relevant applications for historic building documentation purposes has become an active area of research, however fully automated systems in cultural heritage documentation still remains open. In this paper, we present a semi-automated methodology, for 3D façade modelling of cultural heritage assets based on parametric and procedural modelling techniques and using airborne and terrestrial laser scanning data. We present the contribution of our methodology, which we implemented in an open source software environment using the example project of a 16th century early classical era Ottoman structure, Sinan the Architect's Şehzade Mosque in Istanbul, Turkey.

  9. Pilot interaction with automated airborne decision making systems

    Science.gov (United States)

    Rouse, W. B.; Chu, Y. Y.; Greenstein, J. S.; Walden, R. S.

    1976-01-01

    An investigation was made of interaction between a human pilot and automated on-board decision making systems. Research was initiated on the topic of pilot problem solving in automated and semi-automated flight management systems and attempts were made to develop a model of human decision making in a multi-task situation. A study was made of allocation of responsibility between human and computer, and discussed were various pilot performance parameters with varying degrees of automation. Optimal allocation of responsibility between human and computer was considered and some theoretical results found in the literature were presented. The pilot as a problem solver was discussed. Finally the design of displays, controls, procedures, and computer aids for problem solving tasks in automated and semi-automated systems was considered.

  10. Automated Metabolic P System Placement in FPGA

    Directory of Open Access Journals (Sweden)

    Kulakovskis Darius

    2016-07-01

    Full Text Available An original Very High Speed Integrated Circuit Hardware Description Language (VHDL code generation tool that can be used to automate Metabolic P (MP system implementation in hardware such as Field Programmable Gate Arrays (FPGA is described. Unlike P systems, MP systems use a single membrane in their computations. Nevertheless, there are many biological processes that have been successfully modeled by MP systems in software. This is the first attempt to analyze MP system hardware implementations. Two different MP systems are investigated with the purpose of verifying the developed software: the model of glucose–insulin interactions in the Intravenous Glucose Tolerance Test (IVGTT, and the Non-Photochemical Quenching process. The implemented systems’ calculation accuracy and hardware resource usage are examined. It is found that code generation tool works adequately; however, a final decision has to be done by the developer because sometimes several implementation architecture alternatives have to be considered. As an archetypical example serves the IVGTT MP systems’ 21–23 bits FPGA implementation manifesting this in the Digital Signal Processor (DSP, slice, and 4-input LUT usage.

  11. Automation Systems Interconnect分线盒

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Automation Systems Interconnect公司推出一整套分线盒产品,用于和配有M12型连接器的所有传感器一起使用。它们适用于紧密空间和恶劣环境,提供众多选择,包括带一条五米电缆或带易于接线的弹簧夹端子。这些分线盒有四个或八个位置,PVC或PUR,带或不带LED指示,可选择带两个指定插槽以便接线。这些传感器分线盒直接安装在设备上,具有IP65/67保护。

  12. Honeywell Modular Automation System Acceptance Test Procedure

    Energy Technology Data Exchange (ETDEWEB)

    STUBBS, A.M.

    1999-09-21

    The purpose of this Acceptance Test Procedure (ATP) is to verify the operability of the three new furnaces as controlled by the new Honeywell Modular Automation System (MAS). The Honeywell MAS is being installed in PFP to control the three thermal stabilization furnaces in glovebox HA-211. The ATP provides instructions for testing the configuration of the Honeywell MAS at the Plutonium Finishing Plant(PFP). The test will be a field test of the analog inputs, analog outputs, and software interlocks. The interlock test will check the digital input and outputs. Field equipment will not be connected forth is test. Simulated signals will be used to test thermocouple, limit switch, and vacuum pump inputs to the PLUMAS.

  13. The Automated Aircraft Rework System (AARS): A system integration approach

    Science.gov (United States)

    Benoit, Michael J.

    1994-01-01

    The Mercer Engineering Research Center (MERC), under contract to the United States Air Force (USAF) since 1989, has been actively involved in providing the Warner Robins Air Logistics Center (WR-ALC) with a robotic workcell designed to perform rework automated defastening and hole location/transfer operations on F-15 wings. This paper describes the activities required to develop and implement this workcell, known as the Automated Aircraft Rework System (AARS). AARS is scheduled to be completely installed and in operation at WR-ALC by September 1994.

  14. Selecting a Relational Database Management System for Library Automation Systems.

    Science.gov (United States)

    Shekhel, Alex; O'Brien, Mike

    1989-01-01

    Describes the evaluation of four relational database management systems (RDBMSs) (Informix Turbo, Oracle 6.0 TPS, Unify 2000 and Relational Technology's Ingres 5.0) to determine which is best suited for library automation. The evaluation criteria used to develop a benchmark specifically designed to test RDBMSs for libraries are discussed. (CLB)

  15. Scheduling vehicles in automated transportation systems : algorithms and case study

    NARCIS (Netherlands)

    Heijden, van der Matthieu; Ebben, Mark; Gademann, Noud; Harten, van Aart

    2000-01-01

    One of the major planning issues in large scale automated transportation systems is so-called empty vehicle management, the timely supply of vehicles to terminals in order to reduce cargo waiting times. Motivated by a Dutch pilot project on an underground cargo transportation system using Automated

  16. Automated management for pavement inspection system (AMPIS)

    Science.gov (United States)

    Chung, Hung Chi; Girardello, Roberto; Soeller, Tony; Shinozuka, Masanobu

    2003-08-01

    An automated in-situ road surface distress surveying and management system, AMPIS, has been developed on the basis of video images within the framework of GIS software. Video image processing techniques are introduced to acquire, process and analyze the road surface images obtained from a moving vehicle. ArcGIS platform is used to integrate the routines of image processing and spatial analysis in handling the full-scale metropolitan highway surface distress detection and data fusion/management. This makes it possible to present user-friendly interfaces in GIS and to provide efficient visualizations of surveyed results not only for the use of transportation engineers to manage road surveying documentations, data acquisition, analysis and management, but also for financial officials to plan maintenance and repair programs and further evaluate the socio-economic impacts of highway degradation and deterioration. A review performed in this study on fundamental principle of Pavement Management System (PMS) and its implementation indicates that the proposed approach of using GIS concept and its tools for PMS application will reshape PMS into a new information technology-based system providing a convenient and efficient pavement inspection and management.

  17. Automated wind-icing monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Horokhov, Y.; Nekrasov, Y.; Turbin, S. [Donbas National Academy of Civil Engineering and Architecture, Makeyevka, Donetsk (Ukraine); Grimud, G. [NEC Ukrenergo, Kiev (Ukraine)

    2005-07-01

    The development of automated wind-icing monitoring systems (AWIMS) has increased the operational reliability of existing overhead lines through a more accurate prediction of icing events in the Ukraine. The systems are capable of operating without the presence of personnel, and allow operators to immediately obtain information about icing processes. The systems provide statistically significant sets of data for determining and predicting loading conditions, as well as combining measurements of icing mass, wind speed and direction, temperature and humidity. An outline of the principles of AWIMS was presented in paper, as well as a description of the system's architecture and operating principles. The monitoring system consists of an ice mass measuring device; a strain gauge sensor; a photoelectric pickup to determine perpendicular mean wind direction; and a wire simulator. The measuring devices are installed 10 meters above ground. Data is transmitted every 30 minutes to a central information office, where information is processed and stored. Details of the ultrasonic anemometer for wind measurements as well as the devices used for humidity and temperature measurement were presented. The AWIMS computer software measures 6 climatic parameters: wind speed; wind direction; air temperature; humidity; icing mass; and wind pressure on ice-covered wires. Results of a series of tests were presented which included a weather station data analysis and a comparison of the AWIMS with standard climatic loads. An analysis of overhead line failure statistical data was also conducted. Spatial icing distributions were used to calculate the threshold sensitivity for the AWIMS. As estimation of overhead lines density per square kilometer showed was made to determine placement of the systems. It was concluded that 8 more AWIMS will be installed in the following year. 3 refs., 10 figs.

  18. Retrofitting automated process control systems at Ukrainian power stations

    Energy Technology Data Exchange (ETDEWEB)

    B.E. Simkin; V.S. Naumchik; B.D. Kozitskii (and others) [OAO L' vovORGRES, Lviv (Ukraine)

    2008-04-15

    Approaches and principles for retrofitting automated process control systems at Ukrainian power stations are considered. The results obtained from retrofitting the monitoring and control system of Unit 9 at the Burshtyn thermal power station are described.

  19. The Intelligent CAI System for Chemistry Based on Automated Reasoning

    Institute of Scientific and Technical Information of China (English)

    王晓京; 张景中

    1999-01-01

    A new type of intelligent CAI system for chemistry is developed in this paper based on automated reasoning with chemistry knowledge.The system has shown its ability to solve chemistry problems,to assist students and teachers in studies and instruction with the automated reasoning functions.Its open mode of the knowledge base and its unique style of the interface between the system and human provide more opportunities for the users to acquire living knowledge through active participation.The automated reasoning based on basic chemistry knowledge also opened a new approach to the information storage and management of the ICAI system for sciences.

  20. An engineered approach to stem cell culture: automating the decision process for real-time adaptive subculture of stem cells.

    Directory of Open Access Journals (Sweden)

    Dai Fei Elmer Ker

    Full Text Available Current cell culture practices are dependent upon human operators and remain laborious and highly subjective, resulting in large variations and inconsistent outcomes, especially when using visual assessments of cell confluency to determine the appropriate time to subculture cells. Although efforts to automate cell culture with robotic systems are underway, the majority of such systems still require human intervention to determine when to subculture. Thus, it is necessary to accurately and objectively determine the appropriate time for cell passaging. Optimal stem cell culturing that maintains cell pluripotency while maximizing cell yields will be especially important for efficient, cost-effective stem cell-based therapies. Toward this goal we developed a real-time computer vision-based system that monitors the degree of cell confluency with a precision of 0.791±0.031 and recall of 0.559±0.043. The system consists of an automated phase-contrast time-lapse microscope and a server. Multiple dishes are sequentially imaged and the data is uploaded to the server that performs computer vision processing, predicts when cells will exceed a pre-defined threshold for optimal cell confluency, and provides a Web-based interface for remote cell culture monitoring. Human operators are also notified via text messaging and e-mail 4 hours prior to reaching this threshold and immediately upon reaching this threshold. This system was successfully used to direct the expansion of a paradigm stem cell population, C2C12 cells. Computer-directed and human-directed control subcultures required 3 serial cultures to achieve the theoretical target cell yield of 50 million C2C12 cells and showed no difference for myogenic and osteogenic differentiation. This automated vision-based system has potential as a tool toward adaptive real-time control of subculturing, cell culture optimization and quality assurance/quality control, and it could be integrated with current and

  1. Automated systems to identify relevant documents in product risk management

    Directory of Open Access Journals (Sweden)

    Wee Xue

    2012-03-01

    Full Text Available Abstract Background Product risk management involves critical assessment of the risks and benefits of health products circulating in the market. One of the important sources of safety information is the primary literature, especially for newer products which regulatory authorities have relatively little experience with. Although the primary literature provides vast and diverse information, only a small proportion of which is useful for product risk assessment work. Hence, the aim of this study is to explore the possibility of using text mining to automate the identification of useful articles, which will reduce the time taken for literature search and hence improving work efficiency. In this study, term-frequency inverse document-frequency values were computed for predictors extracted from the titles and abstracts of articles related to three tumour necrosis factors-alpha blockers. A general automated system was developed using only general predictors and was tested for its generalizability using articles related to four other drug classes. Several specific automated systems were developed using both general and specific predictors and training sets of different sizes in order to determine the minimum number of articles required for developing such systems. Results The general automated system had an area under the curve value of 0.731 and was able to rank 34.6% and 46.2% of the total number of 'useful' articles among the first 10% and 20% of the articles presented to the evaluators when tested on the generalizability set. However, its use may be limited by the subjective definition of useful articles. For the specific automated system, it was found that only 20 articles were required to develop a specific automated system with a prediction performance (AUC 0.748 that was better than that of general automated system. Conclusions Specific automated systems can be developed rapidly and avoid problems caused by subjective definition of useful

  2. Automating Vendor Fraud Detection in Enterprise Systems

    Directory of Open Access Journals (Sweden)

    Kishore Singh

    2013-06-01

    Full Text Available Fraud is a multi-billion dollar industry that continues to grow annually. Many organisations are poorly prepared to prevent and detect fraud. Fraud detection strategies are intended to quickly and efficiently identify fraudulent activities that circumvent preventative measures. In this paper we adopt a Design-Science methodological framework to develop a model for detection of vendor fraud based on analysis of patterns or signatures identified in enterprise system audit trails. The concept is demonstrated be developing prototype software. Verification of the prototype is achieved by performing a series of experiments. Validation is achieved by independent reviews from auditing practitioners. Key findings of this study are: i automating routine data analytics improves auditor productivity and reduces time taken to identify potential fraud, and ii visualisations assist in promptly identifying potentially fraudulent user activities. The study makes the following contributions: i a model for proactive fraud detection, ii methods for visualising user activities in transaction data, iii a stand-alone MCL-based prototype.

  3. Integrated Automation System for Rare Earth Countercurrent Extraction Process

    Institute of Scientific and Technical Information of China (English)

    柴天佑; 杨辉

    2004-01-01

    Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity,recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, optimal management and remarkable benefits.

  4. An extended process automation system : an approach based on a multi-agent system

    OpenAIRE

    Seilonen, Ilkka

    2006-01-01

    This thesis describes studies on application of multi-agent systems (acronym: MAS) to enhance process automation systems. A specification of an extended process automation system is presented. According to this specification, MAS can be used to extend the functionality of ordinary process automation systems at higher levels of control. Anticipated benefits of the specification include enhanced reconfigurability, responsiveness and flexibility properties of process automation. Previous res...

  5. Evaluation of a Multi-Parameter Sensor for Automated, Continuous Cell Culture Monitoring in Bioreactors

    Science.gov (United States)

    Pappas, D.; Jeevarajan, A.; Anderson, M. M.

    2004-01-01

    Compact and automated sensors are desired for assessing the health of cell cultures in biotechnology experiments in microgravity. Measurement of cell culture medium allows for the optirn.jzation of culture conditions on orbit to maximize cell growth and minimize unnecessary exchange of medium. While several discrete sensors exist to measure culture health, a multi-parameter sensor would simplify the experimental apparatus. One such sensor, the Paratrend 7, consists of three optical fibers for measuring pH, dissolved oxygen (p02), dissolved carbon dioxide (pC02) , and a thermocouple to measure temperature. The sensor bundle was designed for intra-arterial placement in clinical patients, and potentially can be used in NASA's Space Shuttle and International Space Station biotechnology program bioreactors. Methods: A Paratrend 7 sensor was placed at the outlet of a rotating-wall perfused vessel bioreactor system inoculated with BHK-21 (baby hamster kidney) cells. Cell culture medium (GTSF-2, composed of 40% minimum essential medium, 60% L-15 Leibovitz medium) was manually measured using a bench top blood gas analyzer (BGA, Ciba-Corning). Results: A Paratrend 7 sensor was used over a long-term (>120 day) cell culture experiment. The sensor was able to track changes in cell medium pH, p02, and pC02 due to the consumption of nutrients by the BHK-21. When compared to manually obtained BGA measurements, the sensor had good agreement for pH, p02, and pC02 with bias [and precision] of 0.02 [0.15], 1 mm Hg [18 mm Hg], and -4.0 mm Hg [8.0 mm Hg] respectively. The Paratrend oxygen sensor was recalibrated (offset) periodically due to drift. The bias for the raw (no offset or recalibration) oxygen measurements was 42 mm Hg [38 mm Hg]. The measured response (rise) time of the sensor was 20 +/- 4s for pH, 81 +/- 53s for pC02, 51 +/- 20s for p02. For long-term cell culture measurements, these response times are more than adequate. Based on these findings , the Paratrend sensor could

  6. A novel automated bioreactor for scalable process optimisation of haematopoietic stem cell culture.

    Science.gov (United States)

    Ratcliffe, E; Glen, K E; Workman, V L; Stacey, A J; Thomas, R J

    2012-10-31

    Proliferation and differentiation of haematopoietic stem cells (HSCs) from umbilical cord blood at large scale will potentially underpin production of a number of therapeutic cellular products in development, including erythrocytes and platelets. However, to achieve production processes that are scalable and optimised for cost and quality, scaled down development platforms that can define process parameter tolerances and consequent manufacturing controls are essential. We have demonstrated the potential of a new, automated, 24×15 mL replicate suspension bioreactor system, with online monitoring and control, to develop an HSC proliferation and differentiation process for erythroid committed cells (CD71(+), CD235a(+)). Cell proliferation was relatively robust to cell density and oxygen levels and reached up to 6 population doublings over 10 days. The maximum suspension culture density for a 48 h total media exchange protocol was established to be in the order of 10(7)cells/mL. This system will be valuable for the further HSC suspension culture cost reduction and optimisation necessary before the application of conventional stirred tank technology to scaled manufacture of HSC derived products.

  7. A fully automated system for adherent cells microinjection.

    Science.gov (United States)

    Becattini, Gabriele; Mattos, Leonardo S; Caldwell, Darwin G

    2014-01-01

    This paper proposes an automated robotic system to perform cell microinjections to relieve human operators from this highly difficult and tedious manual procedure. The system, which uses commercial equipment currently found on most biomanipulation laboratories, consists of a multitask software framework combining computer vision and robotic control elements. The vision part features an injection pipette tracker and an automatic cell targeting system that is responsible for defining injection points within the contours of adherent cells in culture. The main challenge is the use of bright-field microscopy only, without the need for chemical markers normally employed to highlight the cells. Here, cells are identified and segmented using a threshold-based image processing technique working on defocused images. Fast and precise microinjection pipette positioning over the automatically defined targets is performed by a two-stage robotic system which achieves an average injection rate of 7.6 cells/min with a pipette positioning precision of 0.23 μm. The consistency of these microinjections and the performance of the visual targeting framework were experimentally evaluated using two cell lines (CHO-K1 and HEK) and over 500 cells. In these trials, the cells were automatically targeted and injected with a fluorescent marker, resulting in a correct cell detection rate of 87% and a successful marker delivery rate of 67.5%. These results demonstrate that the new system is capable of better performances than expert operators, highlighting its benefits and potential for large-scale application.

  8. Automated Periodicals System at a Community College Library

    Directory of Open Access Journals (Sweden)

    Vivian Harp

    1974-06-01

    Full Text Available Automated systems need not be extensive to save time and improve efficiency. Moraine Valley's off-line operation, based on a file of 715 periodical titles, generates renewal orders, sends claims, and records subscription histories.

  9. Oceanographic measurements from the Texas Automated Buoy System (TABS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Texas Automated Buoy System contains daily oceanographic measurements from seven buoys off the Texas coast from Brownsville to Sabine. The Texas General Land...

  10. Automated support for pharmacovigilance: a proposed system.

    Science.gov (United States)

    Bright, Roselie A; Nelson, Robert C

    2002-03-01

    Governments, manufacturers, and other entities are interested in adverse event surveillance of marketed medical products. FDA's Center for Drug Evaluation and Research redesigned the post-marketing adverse reaction surveillance process to use the advantages of new technology. As part of this effort, a 'Pharmacovigilance Working Group' designed a new strategy for the review and analyses of adverse event reports received by FDA. It created requirements which divided signal detection into five tiers: (1) Single 'urgent' reports would be sent to reviewers' workstations nightly for immediate attention. Reviewers would be able to customize definitions of 'urgent' (events that should not wait for aggregate review). (2) Single urgent reports would be placed in a context matrix containing historical counts of similar events to aid in initial interpretation. (3) In this first level of aggregate review, graphical displays would highlight patterns within all the reports, both urgent and non-urgent, and (4) periodic drug-specific tabled-based reports would display the newly received reports across a pre-defined variety of displays. These four tiers would produce passive and criteria-based results which would be presented to safety reviewers' electronic workstations. (5) Active query capabilities (routine, such as age, sex, and year distributions, as well as ad hoc) would be available for exploring alerted issues. The historical database would be migrated into the new format. All historical and new reaction data would be coded with the new MedDRA (Medical Dictionary for Regulatory Activities) scheme. The strategy was to design a full data capture system which effectively exploits current computing advances and technical performance to automate many aspects of initial adverse event review, supporting more efficient and effective clinical assessment of safety signals.

  11. Systems Maintenance Automated Repair Tasks (SMART)

    Science.gov (United States)

    Schuh, Joseph; Mitchell, Brent; Locklear, Louis; Belson, Martin A.; Al-Shihabi, Mary Jo Y.; King, Nadean; Norena, Elkin; Hardin, Derek

    2010-01-01

    SMART is a uniform automated discrepancy analysis and repair-authoring platform that improves technical accuracy and timely delivery of repair procedures for a given discrepancy (see figure a). SMART will minimize data errors, create uniform repair processes, and enhance the existing knowledge base of engineering repair processes. This innovation is the first tool developed that links the hardware specification requirements with the actual repair methods, sequences, and required equipment. SMART is flexibly designed to be useable by multiple engineering groups requiring decision analysis, and by any work authorization and disposition platform (see figure b). The organizational logic creates the link between specification requirements of the hardware, and specific procedures required to repair discrepancies. The first segment in the SMART process uses a decision analysis tree to define all the permutations between component/ subcomponent/discrepancy/repair on the hardware. The second segment uses a repair matrix to define what the steps and sequences are for any repair defined in the decision tree. This segment also allows for the selection of specific steps from multivariable steps. SMART will also be able to interface with outside databases and to store information from them to be inserted into the repair-procedure document. Some of the steps will be identified as optional, and would only be used based on the location and the current configuration of the hardware. The output from this analysis would be sent to a work authoring system in the form of a predefined sequence of steps containing required actions, tools, parts, materials, certifications, and specific requirements controlling quality, functional requirements, and limitations.

  12. Culture and Social Systems Revisited

    Science.gov (United States)

    Parsons, Talcott

    1972-01-01

    A brief statement of the history of the relation between culture concepts is given, then, proceeding on the assumption that all human societies are interpenetrated with culture, the author attempts a relatively systematic outline of the structure of cultural systems and of their modes of articulation in social systems. (JB)

  13. Home Automation and Security System Using Android ADK

    Directory of Open Access Journals (Sweden)

    Deepali Javale

    2013-03-01

    Full Text Available Today we are living in 21st century where automation is playing important role in human life. Home automation allows us to control household appliances like light, door, fan, AC etc. It also provides home security and emergency system to be activated. Home automation not only refers to reduce human efforts but also energy efficiency and time saving. The main objective of home automation and security is to help handicapped and old aged people which will enable them to control home appliances and alert them in critical situations.This paper put forwards the design of home automation and security system using Android ADK. The design is based on a standalone embedded system board Android ADK(Accessory Development Kit at home. Home appliances are connected to the ADK and communication is established between the ADK and Android mobile device or tablet. The home appliances are connected to the input/output ports of the embedded system board and their status is passed to the ADK. We would develop an authentication to the system for authorized person to access home appliances. The device with low cost and scalable to less modification to the core is much important. It presents the design and implementation of automation system that can monitor and control home appliances via android phone or tablet.

  14. Automation Marketplace 2010: New Models, Core Systems

    Science.gov (United States)

    Breeding, Marshall

    2010-01-01

    In a year when a difficult economy presented fewer opportunities for immediate gains, the major industry players have defined their business strategies with fundamentally different concepts of library automation. This is no longer an industry where companies compete on the basis of the best or the most features in similar products but one where…

  15. Automation and control of the MMT thermal system

    Science.gov (United States)

    Gibson, J. D.; Porter, Dallan; Goble, William

    2016-07-01

    This study investigates the software automation and control framework for the MMT thermal system. Thermal-related effects on observing and telescope behavior have been considered during the entire software development process. Regression analysis of telescope and observatory subsystem data is used to characterize and model these thermal-related effects. The regression models help predict expected changes in focus and overall astronomical seeing that result from temperature variations within the telescope structure, within the primary mirror glass, and between the primary mirror glass and adjacent air (i.e., mirror seeing). This discussion is followed by a description of ongoing upgrades to the heating, ventilation and air conditioning (HVAC) system and the associated software controls. The improvements of the MMT thermal system have two objectives: 1) to provide air conditioning capabilities for the MMT facilities, and 2) to modernize and enhance the primary mirror (M1) ventilation system. The HVAC upgrade necessitates changes to the automation and control of the M1 ventilation system. The revised control system must factor in the additional requirements of the HVAC system, while still optimizing performance of the M1 ventilation system and the M1's optical behavior. An industry-standard HVAC communication and networking protocol, BACnet (Building Automation and Control network), has been adopted. Integration of the BACnet protocol into the existing software framework at the MMT is discussed. Performance of the existing automated system is evaluated and a preliminary upgraded automated control system is presented. Finally, user interfaces to the new HVAC system are discussed.

  16. A New Approach for Automation of Distributed Systems

    Institute of Scientific and Technical Information of China (English)

    Reinhard Langmann

    2004-01-01

    @@ The concept Lean Web Automation(LWA) describes a new approach for web-based operation of automation devices in distributed systems, which can be used flexible by means of compact and low-cost software without installation expense on the client side. A dynamic process data transfer in the TCP/IP network is implemented by a javabased application model. This model uses a process data proxy to create at web clients an interface to process data of a remote automation device. A first practical realization of the LWA is the software toolkit Web Access Kit for OPC, which uses OPC as the interface to the process.

  17. 15 CFR 758.1 - The Shipper's Export Declaration (SED) or Automated Export System (AES) record.

    Science.gov (United States)

    2010-01-01

    ...) or Automated Export System (AES) record. 758.1 Section 758.1 Commerce and Foreign Trade Regulations... (SED) or Automated Export System (AES) record. (a) The Shipper's Export Declaration (SED) or Automated Export System (AES) record. The SED (Form 7525-V, Form 7525-V-Alt, or Automated Export System record)...

  18. A self-contained, programmable microfluidic cell culture system with real-time microscopy access

    DEFF Research Database (Denmark)

    Skafte-Pedersen, Peder; Hemmingsen, Mette; Sabourin, David

    2011-01-01

    Utilizing microfluidics is a promising way for increasing the throughput and automation of cell biology research. We present a complete self-contained system for automated cell culture and experiments with real-time optical read-out. The system offers a high degree of user-friendliness, stability...

  19. Development of an automation system for a tablet coater

    DEFF Research Database (Denmark)

    Ruotsalainen, Mirja; Heinämäki, Jyrki; Rantanen, Jukka

    2002-01-01

    An instrumentation and automation system for a side-vented pan coater with a novel air-flow rate measurement system for monitoring the film-coating process of tablets was designed and tested. The instrumented coating system was tested and validated by film-coating over 20 pilot-scale batches...... and automated pan-coating system described, including historical data storage capability and a novel air-flow measurement system, is a useful tool for controlling and characterizing the tablet film-coating process. Monitoring of critical process parameters increases the overall coating process efficiency...

  20. Using Publish-Subscribe Messaging for System Status and Automation

    Science.gov (United States)

    Smith, Danford S.

    2015-01-01

    The NASA Goddard Mission Services Evolution Center (GMSEC) system is a message-based plug-and-play open system architecture used in many of NASA mission operations centers. This presentation will focus on the use of GMSEC standard messages to report and analyze the status of a system and enable the automation of the system's components. In GMSEC systems, each component reports its status using a keep-alive message and also publishes status and activities as log messages. In addition, the components can accept functional directive messages from the GMSEC message bus. Over the past several years, development teams have found ways to utilize these messages to create innovative display pages and increasingly sophisticated approaches to automation. This presentation will show the flexibility and value of the message-based approach to system awareness and automation.

  1. Home Automation System (HAS using Android for Mobile Phone

    Directory of Open Access Journals (Sweden)

    Sharon Panth

    2014-01-01

    Full Text Available Automation of the surrounding environment of a modern human being allows increasing his work efficiency and comfort. There has been a significant development in the area of an individual’s routine tasks and those can be automated. In the present times, we can find most of the people clinging to their mobile phones and smart devices throughout the day. Hence with the help of his companion – a mobile phone, some daily household tasks can be accomplished by personifying the use of the mobile phone. Analyzing the current smart phone market, novice mobile users are opting for Android based phones. It has become a second name for a mobile phone in layman terms. Home Automation System (HAS has been designed for mobile phones having Android platform to automate an 8 bit Bluetooth interfaced microcontroller which controls a number of home appliances like lights, fans, bulbs and many more using on/off relay. This paper presents the automated approach of controlling the devices in a household that could ease the tasks of using the traditional method of the switch. The most famous and efficient technology for short range wireless communication- Bluetooth is used here to automate the system. The HAS system for Android users is a step towards the ease of the tasks by controlling one to twenty four different appliances in any home environment.

  2. Effects of diluents on cell culture viability measured by automated cell counter

    Science.gov (United States)

    Chen, Aaron; Leith, Matthew; Tu, Roger; Tahim, Gurpreet; Sudra, Anish; Bhargava, Swapnil

    2017-01-01

    Commercially available automated cell counters based on trypan blue dye-exclusion are widely used in industrial cell culture process development and manufacturing to increase throughput and eliminate inherent variability in subjective interpretation associated with manual hemocytometers. When using these cell counters, sample dilution is often necessary to stay within the assay measurement range; however, the effect of time and diluents on cell culture is not well understood. This report presents the adverse effect of phosphate buffered saline as a diluent on cell viability when used in combination with an automated cell counter. The reduced cell viability was attributed to shear stress introduced by the automated cell counter. Furthermore, length of time samples were incubated in phosphate buffered saline also contributed to the observed drop in cell viability. Finally, as erroneous viability measurements can severely impact process decisions and product quality, this report identifies several alternative diluents that can maintain cell culture viability over time in order to ensure accurate representation of cell culture conditions. PMID:28264018

  3. Towards automated construction of dependable software/hardware systems

    Energy Technology Data Exchange (ETDEWEB)

    Yakhnis, A.; Yakhnis, V. [Pioneer Technologies & Rockwell Science Center, Albuquerque, NM (United States)

    1997-11-01

    This report contains viewgraphs on the automated construction of dependable computer architecture systems. The outline of this report is: examples of software/hardware systems; dependable systems; partial delivery of dependability; proposed approach; removing obstacles; advantages of the approach; criteria for success; current progress of the approach; and references.

  4. Optomechatronic System For Automated Intra Cytoplasmic Sperm Injection*

    Directory of Open Access Journals (Sweden)

    Shulev Assen

    2015-12-01

    Full Text Available This paper presents a complex optomechatronic system for In-Vitro Fertilization (IVF, offering almost complete automation of the Intra Cytoplasmic Sperm Injection (ICSI procedure. The compound parts and sub-systems, as well as some of the computer vision algorithms, are described below. System capabilities for ICSI have been demonstrated on infertile oocyte cells.

  5. Evaluation of a Fully Automated Research Prototype for the Immediate Identification of Microorganisms from Positive Blood Cultures under Clinical Conditions

    Directory of Open Access Journals (Sweden)

    Jay M. Hyman

    2016-04-01

    Full Text Available A clinical laboratory evaluation of an intrinsic fluorescence spectroscopy (IFS-based identification system paired to a BacT/Alert Virtuo microbial detection system (bioMéééérieux, Inc., Durham, NC was performed to assess the potential for fully automated identification of positive blood cultures. The prototype IFS system incorporates a novel method combining a simple microbial purification procedure with rapid in situ identification via spectroscopy. Results were available within 15 min of a bottle signaling positive and required no manual intervention. Among cultures positive for organisms contained within the database and producing acceptable spectra, 75 of 88 (85.2% and 79 of 88 (89.8% were correctly identified to the species and genus level, respectively. These results are similar to the performance of existing rapid methods.

  6. Usability and Applicability of Microfluidic Cell Culture Systems

    DEFF Research Database (Denmark)

    Hemmingsen, Mette

    Microfluidic cell culture has been a research area with great attention the last decade due to its potential to mimic the in vivo cellular environment more closely compared to what is possible by conventional cell culture methods. Many exciting and complex devices have been presented providing...... possibilities for, for example, precise control of the chemical environment, 3D cultures, controlled co-culture of different cell types or automated, individual control of up to 96 cell culture chambers in one integrated system. Despite the great new opportunities to perform novel experimental designs......, these devices still lack general implementation into biological research laboratories. In this project, the usability and applicability of microfluidic cell culture systems have been investigated. The tested systems display good properties regarding optics and compatibility with standard laboratory equipment...

  7. Lab on a chip automates in vitro cell culturing

    DEFF Research Database (Denmark)

    Perozziello, Gerardo; Møllenbach, Jacob; Laursen, Steen

    2012-01-01

    A novel in vitro fertilization system is presented based on an incubation chamber and a microfluidic device which serves as advanced microfluidic cultivation chamber. The flow is controlled by hydrostatic height differences and evaporation is avoided with help of mineral oil. Six patient compartm...

  8. Final Report on the Automated Computer Science Education System.

    Science.gov (United States)

    Danielson, R. L.; And Others

    At the University of Illinois at Urbana, a computer based curriculum called Automated Computer Science Education System (ACSES) has been developed to supplement instruction in introductory computer science courses or to assist individuals interested in acquiring a foundation in computer science through independent study. The system, which uses…

  9. A Framework for the Automation of Air Defence Systems

    NARCIS (Netherlands)

    Choenni, R.S.; Leijnse, C.

    1999-01-01

    The need for more efficiency in military organizations is growing. It is expected that a significant increase in efficiency can be obtained by an integration of communication and information technology. This integration may result in (sub)systems that are fully automated, i.e., systems that are unma

  10. Ideas that Work!. Retuning the Building Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Steven [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-03-01

    A building automation system (BAS) can save considerable energy by effectively and efficiently operating building energy systems (fans, pumps, chillers boilers, etc.), but only when the BAS is properly set up and operated. Tuning, or retuning, the BAS is a cost effective process worthy of your time and attention.

  11. Automated Bilingual Circulation System Using PC Local Area Networks.

    Science.gov (United States)

    Iskanderani, A. I.; Anwar, M. A.

    1992-01-01

    Describes a local automated bilingual circulation system using personal computers in a local area network that was developed at King Abdulaziz University (Saudi Arabia) for Arabic and English materials. Topics addressed include the system structure, hardware, major features, storage requirements, and costs. (nine references) (LRW)

  12. Internal Control, Auditing, and the Automated Acquisitions System.

    Science.gov (United States)

    Hawks, Carol Pitts

    1990-01-01

    Discusses issues and procedures involved in auditing the automated acquisitions system at Ohio State University Libraries. The audit process is explained, internal controls within the system are identified, general control mechanisms such as limited electronic access are discussed, and application control mechanisms that relate to specific…

  13. Microfluidic system with integrated microinjector for automated Drosophila embryo injection.

    Science.gov (United States)

    Delubac, Daniel; Highley, Christopher B; Witzberger-Krajcovic, Melissa; Ayoob, Joseph C; Furbee, Emily C; Minden, Jonathan S; Zappe, Stefan

    2012-11-21

    Drosophila is one of the most important model organisms in biology. Knowledge derived from the recently sequenced 12 genomes of various Drosophila species can today be combined with the results of more than 100 years of research to systematically investigate Drosophila biology at the molecular level. In order to enable automated, high-throughput manipulation of Drosophila embryos, we have developed a microfluidic system based on a Pyrex-silicon-Pyrex sandwich structure with integrated, surface-micromachined silicon nitride injector for automated injection of reagents. Our system automatically retrieves embryos from an external reservoir, separates potentially clustered embryos through a sheath flow mechanisms, passively aligns an embryo with the integrated injector through geometric constraints, and pushes the embryo onto the injector through flow drag forces. Automated detection of an embryo at injection position through an external camera triggers injection of reagents and subsequent ejection of the embryo to an external reservoir. Our technology can support automated screens based on Drosophila embryos as well as creation of transgenic Drosophila lines. Apart from Drosophila embryos, the layout of our system can be easily modified to accommodate injection of oocytes, embryos, larvae, or adults of other species and fills an important technological gap with regard to automated manipulation of multicellular organisms.

  14. Health Track System—An Automated Occupational Medical System

    OpenAIRE

    Compton, Jack E.; Hartridge, Anne D.; Maluish, Andrew G.

    1980-01-01

    The development of an automated occupational health and hazards system is being undertaken at the Department of Energy by Electronic Data Systems. This system, called the Health Track System (HTS), involves the integration and collection of data from the fields of occupational medicine, industrial hygiene, health physics, safety and personnel. This in itself is an exciting prospect, however, the scope of the system calls for it to be installed throughout DOE and contractor organizations acros...

  15. Automated Defect Inspection Systems by Pattern Recognition

    Directory of Open Access Journals (Sweden)

    Mira Park

    2009-06-01

    Full Text Available Visual inspection and classification of cigarettes packaged in a tin container is very important in manufacturing cigarette products that require high quality package presentation. For accurate automated inspection and classification, computer vision has been deployed widely in manufacturing. We present the detection of the defective packaging of tins of cigarettes by identifying individual objects in the cigarette tins. Object identification information is used for the classification of the acceptable cases (correctly packaged tins or defective cases (incorrectly packaged tins. This paper investigates the problem of identifying the individual cigarettes and a paper spoon in the packaged tin using image processing andmorphology operations. The segmentation performance was evaluated on 500 images including examples of both good cases and defective cases.

  16. An automated radar-signature measurement system

    Science.gov (United States)

    Kruse, Juergen

    The design and operation of an automated measurement facility permitting determination of radar cross sections and location and characterization of scattering centers on aircraft models up to 4.5 m in length are described and illustrated with diagrams, drawings, graphs, and photographs. The facility comprises a 15 x 5.8 x 3.8-m measurement chamber, a rotating platform with maximum load 270 kg and elevation range from -5 to +35 deg (precision 0.1 deg), a tunable broadband 2-18-GHz transmitter, a phase-sensitive receiver, and control and data-processing computers. The analytical techniques employed to correct for measurement errors and to resolve scattering centers both longitudinally and transversely (two-dimensional representation) are explained and demonstrated. The facility is currently being used to develop and evaluate stealth-type aircraft designs.

  17. Swab culture monitoring of automated endoscope reprocessors after high-level disinfection

    Institute of Scientific and Technical Information of China (English)

    Lung-Sheng Lu; Keng-Liang Wu; Yi-Chun Chiu; Ming-Tzung Lin; Tsung-Hui Hu; King-Wah Chiu

    2012-01-01

    AIM:To conduct a bacterial culture study for monitoring decontamination of automated endoscope reprocessors (AERs) after high-level disinfection (HLD).METHODS:From February 2006 to January 2011,authors conducted randomized consecutive sampling each month for 7 AERs.Authors collected a total of 420 swab cultures,including 300 cultures from 5 gastroscope AERs,and 120 cultures from 2 colonoscope AERs.Swab cultures were obtained from the residual water from the AERs after a full reprocessing cycle.Samples were cultured to test for aerobic bacteria,anaerobic bacteria,and mycobacterium tuberculosis.RESULTS:The positive culture rate of the AERs was 2.0% (6/300) for gastroscope AERs and 0.8% (1/120)for colonoscope AERs.All the positive cultures,including 6 from gastroscope and 1 from colonoscope AERs,showed monofloral colonization.Of the gastroscope AER samples,50% (3/6) were colonized by aerobic bacterial and 50% (3/6) by fungal contaminations.CONCLUSION:A full reprocessing cycle of an AER with HLD is adequate for disinfection of the machine.Swab culture is a useful method for monitoring AER decontamination after each reprocessing cycle.Fungal contamination of AERs after reprocessing should also be kept in mind.

  18. Advanced in In Situ Inspection of Automated Fiber Placement Systems

    Science.gov (United States)

    Juarez, Peter D.; Cramer, K. Elliott; Seebo, Jeffrey P.

    2016-01-01

    Automated Fiber Placement (AFP) systems have been developed to help take advantage of the tailorability of composite structures in aerospace applications. AFP systems allow the repeatable placement of uncured, spool fed, preimpregnated carbon fiber tape (tows) onto substrates in desired thicknesses and orientations. This automated process can incur defects, such as overlapping tow lines, which can severely undermine the structural integrity of the part. Current defect detection and abatement methods are very labor intensive, and still mostly rely on human manual inspection. Proposed is a thermographic in situ inspection technique which monitors tow placement with an on board thermal camera using the preheated substrate as a through transmission heat source. An investigation of the concept is conducted, and preliminary laboratory results are presented. Also included will be a brief overview of other emerging technologies that tackle the same issue. Keywords: Automated Fiber Placement, Manufacturing defects, Thermography

  19. An automated data acquisition system for isolated tissue studies.

    Science.gov (United States)

    Gross, D M; Weitz, D

    1982-09-01

    The automation of an isolated atria assay is described. Data acquisition, operation of the strip chart recorder, data reduction and manipulation and generation of notebook pages showing final EC50's, dose-ratios and local pA2's has been completely automated. The data are acquired via a SYM-1 (6502 CPU) 8-bit single board computer running an assembly language program stored on an EPROM chip. The data from a physiological recorder system are stored by the SYM-1 and, at the conclusion of the experiment, transmitted to a DEC MINC-11 microminicomputer running a sequence of programs in BASIC for the mathematical manipulation of the data and the automatic generation of lab notebook pages. The automated system totally eliminates hand transcription of data, manual plotting of curves and mathematical errors.

  20. Operator adaptation to changes in system reliability under adaptable automation.

    Science.gov (United States)

    Chavaillaz, Alain; Sauer, Juergen

    2016-11-25

    This experiment examined how operators coped with a change in system reliability between training and testing. Forty participants were trained for 3 h on a complex process control simulation modelling six levels of automation (LOA). In training, participants either experienced a high- (100%) or low-reliability system (50%). The impact of training experience on operator behaviour was examined during a 2.5 h testing session, in which participants either experienced a high- (100%) or low-reliability system (60%). The results showed that most operators did not often switch between LOA. Most chose an LOA that relieved them of most tasks but maintained their decision authority. Training experience did not have a strong impact on the outcome measures (e.g. performance, complacency). Low system reliability led to decreased performance and self-confidence. Furthermore, complacency was observed under high system reliability. Overall, the findings suggest benefits of adaptable automation because it accommodates different operator preferences for LOA. Practitioner Summary: The present research shows that operators can adapt to changes in system reliability between training and testing sessions. Furthermore, it provides evidence that each operator has his/her preferred automation level. Since this preference varies strongly between operators, adaptable automation seems to be suitable to accommodate these large differences.

  1. Dynamic cell culture system (7-IML-1)

    Science.gov (United States)

    Cogoli, Augusto

    1992-01-01

    This experiment is one of the Biorack experiments being flown on the International Microgravity Laboratory 1 (MIL-1) mission as part of an investigation studying cell proliferation and performance in space. One of the objectives of this investigation is to assess the potential benefits of bioprocessing in space with the ultimate goal of developing a bioreactor for continuous cell cultures in space. This experiment will test the operation of an automated culture chamber that was designed for use in a Bioreactor in space. The device to be tested is called the Dynamic Cell Culture System (DCCS). It is a simple device in which media are renewed or chemicals are injected automatically, by means of osmotic pumps. This experiment uses four Type I/O experiment containers. One DCCS unit, which contains a culture chamber with renewal of medium and a second chamber without a medium supply fits in each container. Two DCCS units are maintained under zero gravity conditions during the on-orbit period. The other two units are maintained under 1 gh conditions in a 1 g centrifuge. The schedule for incubator transfer is given.

  2. Pneumatic automation systems in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Shmatkov, N.A.; Kiklevich, Yu.N.

    1981-04-01

    Giprougleavtomatizatsiya, Avtomatgormash, Dongiprouglemash, VNIIGD and other plants develop 30 new pneumatic systems for mine machines and equipment control each year. The plants produce about 200 types of pneumatic systems. Major pneumatic systems for face systems, machines and equipment are reviewed: Sirena system for remote control of ANShch and AShchM face systems for steep coal seams, UPS control systems for pump stations, PAUZA control system for stowing machines, remote control system of B100-200 drilling machines, PUSK control system for coal cutter loaders with pneumatic drive (A-70, Temp), PUVSh control system for ventilation barriers activated from moving electric locomotives, PAZ control system for skip hoist loading. Specifications of the systems are given. Economic benefit produced by the pneumatic control systems are evaluated (from 1,500 to 40,000 rubles/year). Using the systems increases productivity of face machines and other machines used in black coal mines by 5 to 30%.

  3. Security-Control Systems and Automation in Contemporary Buildings

    Directory of Open Access Journals (Sweden)

    Saadet Aytıs

    1999-05-01

    Full Text Available As a result of the developing technology, major renovations related to the security control systems and to building automation applications on contemporary buildings have appeared. The main item of the control systems is the entry system with cards and passwords and this is applied almost in all the large contemporary buildings. The entry and exit to/from the carparking is getting to be as important as the entry and exit to/from the building. Thus, specific measures to stop the security system being already perforated in the parking are needed. Warning systems with a great range of different detectors against various dangers that run connected to the mainframe computers and that turn on the system in case of danger are taken into consideration. The fact of obtaining all comfort conditions desired in the contemporary high space buildings and functioning of the first-aid systems are fully realized by computers with the help of systems that are called “Building Automation System” (BAS. All inspection, energy saving and security controls are achieved through these systems. In the buildings where building automation systems are applied, trained personel is needed to keep the system running; and the training of the residents about the system gains more and more importance.

  4. Chip breaking system for automated machine tool

    Science.gov (United States)

    Arehart, Theodore A.; Carey, Donald O.

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  5. The Robo-AO automated intelligent queue system

    Science.gov (United States)

    Riddle, Reed L.; Hogstrom, Kristina; Papadopoulos, Athanasios; Baranec, Christoph; Law, Nicholas M.

    2014-07-01

    Robo-AO is the first automated laser adaptive optics instrument. In just its second year of scientific operations, it has completed the largest adaptive optics surveys to date, each comprising thousands of targets. Robo-AO uses a fully automated queue scheduling system that selects targets based on criteria entered on a per observing program or per target basis, and includes the ability to coordinate with US Strategic Command automatically to avoid lasing space assets. This enables Robo-AO to select among thousands of targets at a time, and achieve an average observation rate of approximately 20 targets per hour.

  6. The Robo-AO automated intelligent queue system

    CERN Document Server

    Riddle, Reed L; Papadopoulos, Athanasios; Baranec, Christoph; Law, Nicholas M

    2014-01-01

    Robo-AO is the first automated laser adaptive optics instrument. In just its second year of scientific operations, it has completed the largest adaptive optics surveys to date, each comprising thousands of targets. Robo-AO uses a fully automated queue scheduling system that selects targets based on criteria entered on a per observing program or per target basis, and includes the ability to coordinate with US Strategic Command automatically to avoid lasing space assets. This enables Robo-AO to select among thousands of targets at a time, and achieve an average observation rate of approximately 20 targets per hour.

  7. Prototype Software for Automated Structural Analysis of Systems

    DEFF Research Database (Denmark)

    Jørgensen, A.; Izadi-Zamanabadi, Roozbeh; Kristensen, M.

    2004-01-01

    In this paper we present a prototype software tool that is developed to analyse the structural model of automated systems in order to identify redundant information that is hence utilized for Fault detection and Isolation (FDI) purposes. The dedicated algorithms in this software tool use a tri...

  8. Friction ridge skin - Automated Fingerprint Identification System (AFIS)

    NARCIS (Netherlands)

    Meuwly, Didier

    2009-01-01

    This contribution describes the development and the forensic use of automated fingerprint identification systems (AFISs). AFISs were initially developed in order to overcome the limitations of the paper-based fingerprint collections, by digitizing the ten-print cards in computerized databases and to

  9. THE UNIVERSITIES, EMPLOYERS AND STUDENTS INTERACTION AUTOMATED SYSTEM

    Directory of Open Access Journals (Sweden)

    Dmitry P. Danilaev

    2014-01-01

    Full Text Available The issues of higher education system subjects’ interaction in order to effectively staffing industries are considered in this paper. The model and the structure of the information interaction automated subsystem, providing the subjects interests, requirements and the highly qualified technicians training purposes coordination, is proposed. 

  10. Automated Energy Distribution and Reliability System Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Buche, D. L.; Perry, S.

    2007-10-01

    This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

  11. Automated Energy Distribution and Reliability System (AEDR): Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Buche, D. L.

    2008-07-01

    This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

  12. INFORMATION SYSTEM OF AUTOMATION OF PREPARATION EDUCATIONAL PROCESS DOCUMENTS

    Directory of Open Access Journals (Sweden)

    V. A. Matyushenko

    2016-01-01

    Full Text Available Information technology is rapidly conquering the world, permeating all spheres of human activity. Education is not an exception. An important direction of information of education is the development of university management systems. Modern information systems improve and facilitate the management of all types of activities of the institution. The purpose of this paper is development of system, which allows automating process of formation of accounting documents. The article describes the problem of preparation of the educational process documents. Decided to project and create the information system in Microsoft Access environment. The result is four types of reports obtained by using the developed system. The use of this system now allows you to automate the process and reduce the effort required to prepare accounting documents. All reports was implement in Microsoft Excel software product and can be used for further analysis and processing.

  13. A Review of Automated Inspection Planning Systems for Use with an Integrated Manufacturing System

    Institute of Scientific and Technical Information of China (English)

    A; Ajmal; D; S; Manolache

    2002-01-01

    The paper outlines a comprehensive state-of-the- ar t review of automated inspection planning systems for use with a co-ordinate-m easuring machine (CMM) and summaries the application methods and techniques used in automation of inspection planning for CMMs. A classification of the automate d inspection planning systems according to the concept, methodologies and techni ques used for inspection planning tasks has been identified and grouped. The rev iew also outlines the classification of inspection planni...

  14. A Automated Tool for Supporting FMEAs of Digital Systems

    Energy Technology Data Exchange (ETDEWEB)

    Yue,M.; Chu, T.-L.; Martinez-Guridi, G.; Lehner, J.

    2008-09-07

    Although designs of digital systems can be very different from each other, they typically use many of the same types of generic digital components. Determining the impacts of the failure modes of these generic components on a digital system can be used to support development of a reliability model of the system. A novel approach was proposed for such a purpose by decomposing the system into a level of the generic digital components and propagating failure modes to the system level, which generally is time-consuming and difficult to implement. To overcome the associated issues of implementing the proposed FMEA approach, an automated tool for a digital feedwater control system (DFWCS) has been developed in this study. The automated FMEA tool is in nature a simulation platform developed by using or recreating the original source code of the different module software interfaced by input and output variables that represent physical signals exchanged between modules, the system, and the controlled process. For any given failure mode, its impacts on associated signals are determined first and the variables that correspond to these signals are modified accordingly by the simulation. Criteria are also developed, as part of the simulation platform, to determine whether the system has lost its automatic control function, which is defined as a system failure in this study. The conceptual development of the automated FMEA support tool can be generalized and applied to support FMEAs for reliability assessment of complex digital systems.

  15. Energy study of automated guideway transit (AGT) systems

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, C.; Cronin, R.H.; Ellis, H.T.

    1979-08-01

    Automated guideway transit systems provide passenger transportation on exclusive guideways in vehicles without operators. An energy study of 6 AGT systems was made for the Seattle-Tacoma International Airport; Tampa International Airport; Busch Gardens, Wiliamsburg, Virginia; Fairland Town Center, Dearborne, Michigan; Dallas-Fort Worth Regional Airport; and West Virginia University, Morgantown, West Virinia. Selected physical, operating, and economic characteristics of the systems; services rendered; direct, indirect, and capital energy demands; and energy intensities are described.

  16. Engineering methods and tools for cyber–physical automation systems

    OpenAIRE

    Ahmad, Bilal; Vera, Daniel; Harrison, Robert

    2016-01-01

    Much has been published about potential benefits of the adoption of cyber–physical systems (CPSs) in manufacturing industry. However, less has been said about how such automation systems might be effectively configured and supported through their lifecycles and how application modeling, visualization, and reuse of such systems might be best achieved. It is vitally important to be able to incorporate support for engineering best practice while at the same time exploiting the potential that CPS...

  17. Development of a semi-automated high throughput transient transfection system.

    Science.gov (United States)

    Bos, Aaron B; Duque, Joseph N; Bhakta, Sunil; Farahi, Farzam; Chirdon, Lindsay A; Junutula, Jagath R; Harms, Peter D; Wong, Athena W

    2014-06-20

    Transient transfection of mammalian cells provides a rapid method of producing protein for research purposes. Combining the transient transfection protein expression system with new automation technologies developed for the biotechnology industry would enable a high throughput protein production platform that could be utilized to generate a variety of different proteins in a short amount of time. These proteins could be used for an assortment of studies including proof of concept, antibody development, and biological structure and function. Here we describe such a platform: a semi-automated process for PEI-mediated transient protein production in tubespins at a throughput of 96 transfections at a time using a Biomek FX(P) liquid handling system. In one batch, 96 different proteins can be produced in milligram amounts by PEI transfection of HEK293 cells cultured in 50 mL tubespins. Methods were developed for the liquid handling system to automate the different processes associated with transient transfections such as initial cell seeding, DNA:PEI complex activation and DNA:PEI complex addition to the cells. Increasing DNA:PEI complex incubation time resulted in lower protein expression. To minimize protein production variability, the methods were further optimized to achieve consistent cell seeding, control the DNA:PEI incubation time and prevent cross-contamination among different tubespins. This semi-automated transfection process was applied to express 520 variants of a human IgG1 (hu IgG1) antibody.

  18. Tools for the automation of large control systems

    CERN Document Server

    Gaspar, Clara

    2005-01-01

    The new LHC experiments at CERN will have very large numbers of channels to operate. In order to be able to configure and monitor such large systems, a high degree of parallelism is necessary. The control system is built as a hierarchy of sub-systems distributed over several computers. A toolkit – SMI++, combining two approaches: finite state machines and rule-based programming, allows for the description of the various sub-systems as decentralized deciding entities, reacting in real-time to changes in the system, thus providing for the automation of standard procedures and the for the automatic recovery from error conditions in a hierarchical fashion. In this paper we will describe the principles and features of SMI++ as well as its integration with an industrial SCADA tool for use by the LHC experiments and we will try to show that such tools, can provide a very convenient mechanism for the automation of large scale, high complexity, applications.

  19. Tools for the Automation of Large Distributed Control Systems

    CERN Document Server

    Gaspar, Clara

    2005-01-01

    The new LHC experiments at CERN will have very large numbers of channels to operate. In order to be able to configure and monitor such large systems, a high degree of parallelism is necessary. The control system is built as a hierarchy of sub-systems distributed over several computers. A toolkit - SMI++, combining two approaches: finite state machines and rule-based programming, allows for the description of the various sub-systems as decentralized deciding entities, reacting is real-time to changes in the system, thus providing for the automation of standard procedures and for the automatic recovery from error conditions in a hierarchical fashion. In this paper we will describe the principles and features of SMI++ as well as its integration with an industrial SCADA tool for use by the LHC experiments and we will try to show that such tools, can provide a very convenient mechanism for the automation of large scale, high complexity, applications.

  20. Design and Implementation of GSM Based Automated Home Security System

    Directory of Open Access Journals (Sweden)

    Love Aggarwal

    2014-05-01

    Full Text Available The Automated Home Security System aims at building a security system for common households using GSM modem, sensors and microcontroller. Since many years, impeccable security system has been the prime need of every man who owns a house. The increasing crime rate has further pressed the need for it. Our system is an initiative in this direction. The system provides security function by monitoring the surroundings at home for intruders, fire, gas leakages etc. using sensors and issue alerts to the owners and local authorities by using GSM via SMS. It provides the automation function as it can control (On/Off the various home appliances while the owners are away via SMS. Thus the Automated Home Security System is self-sufficient and can be relied upon undoubtedly. Also, it is capable of establishing two way communication with its owner so that he/she can keep a watch on his/her home via sensor information or live video streaming. A camera can be installed for continuous monitoring of the system and its surroundings. The system consists of two main parts: hardware and software. Hardware consists of Microcontroller, Sensors, Buzzer and GSM modem while software is implemented by tools using Embedded ‘C’.

  1. MARCIVE: A Cooperative Automated Library System

    Directory of Open Access Journals (Sweden)

    Virginia M. Bowden

    1974-09-01

    Full Text Available The MARCIVE Library System is a batch computer system utilizing both the MARC tapes and local cataloging to provide catalog cal'ds, book catalogs, and selective bibliographies for five academic libraries in San Antonio, Texas. The development of the system is traced and present procedures are described. Batch retrieval from the MARC 1·ecords plus the modification of these records costs less than twenty cents per title. Computer costs for retrieval, modification, and card production average sixty-six cents per title, between seven and ten cents per card. The attributes and limitations of the MARCIVE system are compared with those of the OCLC system.

  2. An Automated Recommender System for Course Selection

    Directory of Open Access Journals (Sweden)

    Amer Al-Badarenah

    2016-03-01

    Full Text Available Most of electronic commerce and knowledge management` systems use recommender systems as the underling tools for identifying a set of items that will be of interest to a certain user. Collaborative recommender systems recommend items based on similarities and dissimilarities among users’ preferences. This paper presents a collaborative recommender system that recommends university elective courses to students by exploiting courses that other similar students had taken. The proposed system employs an association rules mining algorithm as an underlying technique to discover patterns between courses. Experiments were conducted with real datasets to assess the overall performance of the proposed approach.

  3. Mimer: an automated spreadsheet-based crystallization screening system.

    Science.gov (United States)

    Brodersen, Ditlev Egeskov; Andersen, Gregers Rom; Andersen, Christian Brix Folsted

    2013-07-01

    In this paper, a simple low-cost alternative to large commercial systems for preparing macromolecular crystallization conditions is described. Using an intuitive spreadsheet-based approach, the system allows the rapid calculation of relevant pipetting volumes given known stock-solution concentrations and incorporates the automatic design of custom crystallization screens via the incomplete-factorial and grid-screen approaches. Automated dispensing of the resulting crystallization screens is achieved using a generic and relatively inexpensive liquid handler.

  4. Automated System for Effective Internet Marketing Campaign (ASEIMC)

    OpenAIRE

    Kovacheva, Todorka

    2008-01-01

    The purpose of the paper is to present an automated system for realization of effective internet marketing campaign (ASEIMC). The constantly growing number of websites available online brings more problems for the contemporary enterprises to reach their potential customers. Therefore the companies have to discover novel approaches to increase their online sales. The presented ASEIMC system gives such an approach and helps small and medium enterprises to compete for customers ...

  5. Robotic control architecture development for automated nuclear material handling systems

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, R.D.; Hurd, R.; Couture, S.; Wilhelmsen, K.

    1995-02-01

    Lawrence Livermore National Laboratory (LLNL) is engaged in developing automated systems for handling materials for mixed waste treatment, nuclear pyrochemical processing, and weapon components disassembly. In support of these application areas there is an extensive robotic development program. This paper will describe the portion of this effort at LLNL devoted to control system architecture development, and review two applications currently being implemented which incorporate these technologies.

  6. Miniature Bioreactor System for Long-Term Cell Culture

    Science.gov (United States)

    Gonda, Steve R.; Kleis, Stanley J.; Geffert, Sandara K.

    2010-01-01

    A prototype miniature bioreactor system is designed to serve as a laboratory benchtop cell-culturing system that minimizes the need for relatively expensive equipment and reagents and can be operated under computer control, thereby reducing the time and effort required of human investigators and reducing uncertainty in results. The system includes a bioreactor, a fluid-handling subsystem, a chamber wherein the bioreactor is maintained in a controlled atmosphere at a controlled temperature, and associated control subsystems. The system can be used to culture both anchorage-dependent and suspension cells, which can be either prokaryotic or eukaryotic. Cells can be cultured for extended periods of time in this system, and samples of cells can be extracted and analyzed at specified intervals. By integrating this system with one or more microanalytical instrument(s), one can construct a complete automated analytical system that can be tailored to perform one or more of a large variety of assays.

  7. Automated Data Management Information System (ADMIS)

    Science.gov (United States)

    Blackstone, C.; Dunn, D.; Sullivan, E.; Whitlock, J.; Buehler, D.; Pratt, L.; Hoffiditz, T.; Rose, J.; Smithson, M.; Feeley, J.

    1974-01-01

    ADMIS stores and controls data and documents associated with manned space flight effort. System contains all data oriented toward a specific document; it is primary source of reports generated by the system. Each group of records is composed of one document record, one distribution record for each recipient of the document, and one summary record.

  8. An automated library financial management system

    Science.gov (United States)

    Dueker, S.; Gustafson, L.

    1977-01-01

    A computerized library acquisition system developed for control of informational materials acquired at NASA Ames Research Center is described. The system monitors the acquisition of both library and individual researchers' orders and supplies detailed financial, statistical, and bibliographical information. Applicability for other libraries and the future availability of the program is discussed.

  9. Maximizing throughput in an automated test system

    Institute of Scientific and Technical Information of China (English)

    朱君

    2007-01-01

    @@ Overview This guide is collection of whitepapers designed to help you develop test systems that lower your cost, increase your test throughput, and can scale with future requirements. This whitepaper provides strategies for maximizing system throughput. To download the complete developers guide (120 pages), visit ni. com/automatedtest.

  10. Automated Traffic Management System and Method

    Science.gov (United States)

    Glass, Brian J. (Inventor); Spirkovska, Liljana (Inventor); McDermott, William J. (Inventor); Reisman, Ronald J. (Inventor); Gibson, James (Inventor); Iverson, David L. (Inventor)

    2000-01-01

    A data management system and method that enables acquisition, integration, and management of real-time data generated at different rates, by multiple heterogeneous incompatible data sources. The system achieves this functionality by using an expert system to fuse data from a variety of airline, airport operations, ramp control, and air traffic control tower sources, to establish and update reference data values for every aircraft surface operation. The system may be configured as a real-time airport surface traffic management system (TMS) that electronically interconnects air traffic control, airline data, and airport operations data to facilitate information sharing and improve taxi queuing. In the TMS operational mode, empirical data shows substantial benefits in ramp operations for airlines, reducing departure taxi times by about one minute per aircraft in operational use, translating as $12 to $15 million per year savings to airlines at the Atlanta, Georgia airport. The data management system and method may also be used for scheduling the movement of multiple vehicles in other applications, such as marine vessels in harbors and ports, trucks or railroad cars in ports or shipping yards, and railroad cars in switching yards. Finally, the data management system and method may be used for managing containers at a shipping dock, stock on a factory floor or in a warehouse, or as a training tool for improving situational awareness of FAA tower controllers, ramp and airport operators, or commercial airline personnel in airfield surface operations.

  11. 15 CFR 732.5 - Steps regarding Shipper's Export Declaration or Automated Export System record, Destination...

    Science.gov (United States)

    2010-01-01

    ... Declaration or Automated Export System record, Destination Control Statements, and recordkeeping. 732.5... THE EAR § 732.5 Steps regarding Shipper's Export Declaration or Automated Export System record... Automated Export System (AES) record. Exporters or agents authorized to complete the Shipper's...

  12. 76 FR 4001 - Foreign Trade Regulations (FTR): Mandatory Automated Export System Filing for All Shipments...

    Science.gov (United States)

    2011-01-21

    ... Commerce Census Bureau 15 CFR Part 30 Foreign Trade Regulations (FTR): Mandatory Automated Export System... Foreign Trade Regulations (FTR): Mandatory Automated Export System Filing for All Shipments Requiring... Automated Export System (AES) or through AESDirect for all shipments of used self-propelled...

  13. 21 CFR 864.9175 - Automated blood grouping and antibody test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated blood grouping and antibody test system... Manufacture Blood and Blood Products § 864.9175 Automated blood grouping and antibody test system. (a) Identification. An automated blood grouping and antibody test system is a device used to group erythrocytes...

  14. 47 CFR 80.475 - Scope of service of the Automated Maritime Telecommunications System (AMTS).

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Scope of service of the Automated Maritime Telecommunications System (AMTS). 80.475 Section 80.475 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Automated Systems § 80.475 Scope of service of the Automated Maritime Telecommunications System (AMTS)....

  15. Self-Contained Automated Vehicle Washing System

    Science.gov (United States)

    2014-09-26

    military personnel from harmful contaminants are the impetus for designing a closed loop vehicle washing system. Systems Specification Development This...I I I " I I EACH CONTAINMENT PAD HAS SELf -CONTAINED STORAGE TO MINIMIZ[ THE FOOTPRINT DURI NG TRANSPORT . I ~ ,’"j PIVOTING ELBOWS LOCK ...shipped to Dugway, UT in August 2013 and travel plans were confirmed only to encounter the government shutdown which would delay travel until 2014

  16. Automated design of complex dynamic systems.

    Directory of Open Access Journals (Sweden)

    Michiel Hermans

    Full Text Available Several fields of study are concerned with uniting the concept of computation with that of the design of physical systems. For example, a recent trend in robotics is to design robots in such a way that they require a minimal control effort. Another example is found in the domain of photonics, where recent efforts try to benefit directly from the complex nonlinear dynamics to achieve more efficient signal processing. The underlying goal of these and similar research efforts is to internalize a large part of the necessary computations within the physical system itself by exploiting its inherent non-linear dynamics. This, however, often requires the optimization of large numbers of system parameters, related to both the system's structure as well as its material properties. In addition, many of these parameters are subject to fabrication variability or to variations through time. In this paper we apply a machine learning algorithm to optimize physical dynamic systems. We show that such algorithms, which are normally applied on abstract computational entities, can be extended to the field of differential equations and used to optimize an associated set of parameters which determine their behavior. We show that machine learning training methodologies are highly useful in designing robust systems, and we provide a set of both simple and complex examples using models of physical dynamical systems. Interestingly, the derived optimization method is intimately related to direct collocation a method known in the field of optimal control. Our work suggests that the application domains of both machine learning and optimal control have a largely unexplored overlapping area which envelopes a novel design methodology of smart and highly complex physical systems.

  17. Automated design of complex dynamic systems.

    Science.gov (United States)

    Hermans, Michiel; Schrauwen, Benjamin; Bienstman, Peter; Dambre, Joni

    2014-01-01

    Several fields of study are concerned with uniting the concept of computation with that of the design of physical systems. For example, a recent trend in robotics is to design robots in such a way that they require a minimal control effort. Another example is found in the domain of photonics, where recent efforts try to benefit directly from the complex nonlinear dynamics to achieve more efficient signal processing. The underlying goal of these and similar research efforts is to internalize a large part of the necessary computations within the physical system itself by exploiting its inherent non-linear dynamics. This, however, often requires the optimization of large numbers of system parameters, related to both the system's structure as well as its material properties. In addition, many of these parameters are subject to fabrication variability or to variations through time. In this paper we apply a machine learning algorithm to optimize physical dynamic systems. We show that such algorithms, which are normally applied on abstract computational entities, can be extended to the field of differential equations and used to optimize an associated set of parameters which determine their behavior. We show that machine learning training methodologies are highly useful in designing robust systems, and we provide a set of both simple and complex examples using models of physical dynamical systems. Interestingly, the derived optimization method is intimately related to direct collocation a method known in the field of optimal control. Our work suggests that the application domains of both machine learning and optimal control have a largely unexplored overlapping area which envelopes a novel design methodology of smart and highly complex physical systems.

  18. Designing of smart home automation system based on Raspberry Pi

    Science.gov (United States)

    Saini, Ravi Prakash; Singh, Bhanu Pratap; Sharma, Mahesh Kumar; Wattanawisuth, Nattapol; Leeprechanon, Nopbhorn

    2016-03-01

    Locally networked or remotely controlled home automation system becomes a popular paradigm because of the numerous advantages and is suitable for academic research. This paper proposes a method for an implementation of Raspberry Pi based home automation system presented with an android phone access interface. The power consumption profile across the connected load is measured accurately through programming. Users can access the graph of total power consumption with respect to time worldwide using their Dropbox account. An android application has been developed to channelize the monitoring and controlling operation of home appliances remotely. This application facilitates controlling of operating pins of Raspberry Pi by pressing the corresponding key for turning "on" and "off" of any desired appliance. Systems can range from the simple room lighting control to smart microcontroller based hybrid systems incorporating several other additional features. Smart home automation systems are being adopted to achieve flexibility, scalability, security in the sense of data protection through the cloud-based data storage protocol, reliability, energy efficiency, etc.

  19. Wireless energizing system for an automated implantable sensor

    Science.gov (United States)

    Swain, Biswaranjan; Nayak, Praveen P.; Kar, Durga P.; Bhuyan, Satyanarayan; Mishra, Laxmi P.

    2016-07-01

    The wireless drive of an automated implantable electronic sensor has been explored for health monitoring applications. The proposed system comprises of an automated biomedical sensing system which is energized through resonant inductive coupling. The implantable sensor unit is able to monitor the body temperature parameter and sends back the corresponding telemetry data wirelessly to the data recoding unit. It has been observed that the wireless power delivery system is capable of energizing the automated biomedical implantable electronic sensor placed over a distance of 3 cm from the power transmitter with an energy transfer efficiency of 26% at the operating resonant frequency of 562 kHz. This proposed method ensures real-time monitoring of different human body temperatures around the clock. The monitored temperature data have been compared with a calibrated temperature measurement system to ascertain the accuracy of the proposed system. The investigated technique can also be useful for monitoring other body parameters such as blood pressure, bladder pressure, and physiological signals of the patient in vivo using various implantable sensors.

  20. Non-Contact Conductivity Measurement for Automated Sample Processing Systems

    Science.gov (United States)

    Beegle, Luther W.; Kirby, James P.

    2012-01-01

    A new method has been developed for monitoring and control of automated sample processing and preparation especially focusing on desalting of samples before analytical analysis (described in more detail in Automated Desalting Apparatus, (NPO-45428), NASA Tech Briefs, Vol. 34, No. 8 (August 2010), page 44). The use of non-contact conductivity probes, one at the inlet and one at the outlet of the solid phase sample preparation media, allows monitoring of the process, and acts as a trigger for the start of the next step in the sequence (see figure). At each step of the muti-step process, the system is flushed with low-conductivity water, which sets the system back to an overall low-conductivity state. This measurement then triggers the next stage of sample processing protocols, and greatly minimizes use of consumables. In the case of amino acid sample preparation for desalting, the conductivity measurement will define three key conditions for the sample preparation process. First, when the system is neutralized (low conductivity, by washing with excess de-ionized water); second, when the system is acidified, by washing with a strong acid (high conductivity); and third, when the system is at a basic condition of high pH (high conductivity). Taken together, this non-contact conductivity measurement for monitoring sample preparation will not only facilitate automation of the sample preparation and processing, but will also act as a way to optimize the operational time and use of consumables

  1. Low cost automated precise time measurement system

    Science.gov (United States)

    Alpert, A.; Liposchak, P.

    1973-01-01

    The Aerospace Guidance and Metrology Center (AGMC) has the responsibility for the dissemination of Precise Time and Time Interval (PTTI) to Air Force timing systems requiring microsecond time. In order to maintain traceability to the USNO Master Clock in Washington D.C., and accomplish efficient logging of time and frequency data on individual precision clocks, a simple automatic means of acquiring precise time has been devised. The Automatic Time Interval Measurement System (ATIMS) consists of a minicomputer (8K Memory), teletype terminal, electronic counter, Loran C receiver, time base generator and locally-manufactured relay matrix panel. During the measurement process, the computer controls the relay matrix which selects for comparison 13 atomic clocks against a reference clock and the reference versus Loran C. Through use of the system teletype, the operator is able to set the system clock (hours, minutes and seconds), examine and/or modify all clock data and constants, and set measurement intervals. This is done in a conversational manner. A logic flow diagram, system schematic, source listing and software components are included in the presentation.

  2. A listening test system for automative audio

    DEFF Research Database (Denmark)

    Bech, Søren; Gulbol, Mehmet-Ali; Martin, Geoff

    2005-01-01

    This paper describes two listening tests that were performed to provide initial validation of an auralisation system (see Part 1) to mimic the acoustics of a car interior. The validation is based on a comparison of results from an in-car listening test and another test using the auralisation syst...... and recordings of the stimuli used for the in-car test. The music samples for the test were chosen from a database of various CODEC examples from a previous extensive ITU test to validate the ITU-R BS.1387-1 standard.......This paper describes two listening tests that were performed to provide initial validation of an auralisation system (see Part 1) to mimic the acoustics of a car interior. The validation is based on a comparison of results from an in-car listening test and another test using the auralisation system...

  3. An automated miniature robotic vehicle inspection system

    Science.gov (United States)

    Dobie, Gordon; Summan, Rahul; MacLeod, Charles; Pierce, Gareth; Galbraith, Walter

    2014-02-01

    A novel, autonomous reconfigurable robotic inspection system for quantitative NDE mapping is presented. The system consists of a fleet of wireless (802.11g) miniature robotic vehicles, each approximately 175 × 125 × 85 mm with magnetic wheels that enable them to inspect industrial structures such as storage tanks, chimneys and large diameter pipe work. The robots carry one of a number of payloads including a two channel MFL sensor, a 5 MHz dry coupled UT thickness wheel probe and a machine vision camera that images the surface. The system creates an NDE map of the structure overlaying results onto a 3D model in real time. The authors provide an overview of the robot design, data fusion algorithms (positioning and NDE) and visualization software.

  4. Fully automated system for pulsed NMR measurements

    Energy Technology Data Exchange (ETDEWEB)

    Cantor, David Milton

    1977-01-01

    A system is described which places many of the complex, tedious operations for pulsed NMR experiments under computer control. It automatically optimizes the experiment parameters of pulse length and phase, and precision, accuracy, and measurement speed are improved. The hardware interface between the computer and the NMR instrument is described. Design features, justification of the choices made between alternative design strategies, and details of the implementation of design goals are presented. Software features common to all the available experiments are discussed. Optimization of pulse lengths and phases is performed via a sequential search technique called Uniplex. Measurements of the spin-lattice and spin-spin relaxation times and of diffusion constants are automatic. Options for expansion of the system are explored along with some of the limitations of the system.

  5. Automated Analysis of Security in Networking Systems

    DEFF Research Database (Denmark)

    Buchholtz, Mikael

    2004-01-01

    It has for a long time been a challenge to built secure networking systems. One way to counter this problem is to provide developers of software applications for networking systems with easy-to-use tools that can check security properties before the applications ever reach the marked. These tools...... will both help raise the general level of awareness of the problems and prevent the most basic flaws from occurring. This thesis contributes to the development of such tools. Networking systems typically try to attain secure communication by applying standard cryptographic techniques. In this thesis...... attacks, and attacks launched by insiders. Finally, the perspectives for the application of the analysis techniques are discussed, thereby, coming a small step closer to providing developers with easy- to-use tools for validating the security of networking applications....

  6. Automated system for the calibration of magnetometers

    DEFF Research Database (Denmark)

    Petrucha, Vojtech; Kaspar, Petr; Ripka, Pavel

    2009-01-01

    A completely nonmagnetic calibration platform has been developed and constructed at DTU Space (Technical University of Denmark). It is intended for on-site scalar calibration of high-precise fluxgate magnetometers. An enhanced version of the same platform is being built at the Czech Technical Uni...... through custom-made optical incremental sensors. The system is controlled by a microcontroller, which executes commands from a computer. The properties of the system as well as calibration and measurement results will be presented. ©2009 American Institute of Physics...

  7. HORIZONTAL AUTOMATED STORAGE AND RETRIEVAL SYSTEM

    Directory of Open Access Journals (Sweden)

    Jacek Stanisław Tutak

    2017-03-01

    The final stage of the project was to verify the activities of the designed solutions based on tests on a prototype of the storage device. More precisely, it was tested on a machine prepared for a particular customer and a chosen configuration system, which is a combination of the triune manipulator of vertical storage controlled in an open loop.

  8. Intelligent Computer Vision System for Automated Classification

    Science.gov (United States)

    Jordanov, Ivan; Georgieva, Antoniya

    2010-05-01

    In this paper we investigate an Intelligent Computer Vision System applied for recognition and classification of commercially available cork tiles. The system is capable of acquiring and processing gray images using several feature generation and analysis techniques. Its functionality includes image acquisition, feature extraction and preprocessing, and feature classification with neural networks (NN). We also discuss system test and validation results from the recognition and classification tasks. The system investigation also includes statistical feature processing (features number and dimensionality reduction techniques) and classifier design (NN architecture, target coding, learning complexity and performance, and training with our own metaheuristic optimization method). The NNs trained with our genetic low-discrepancy search method (GLPτS) for global optimisation demonstrated very good generalisation abilities. In our view, the reported testing success rate of up to 95% is due to several factors: combination of feature generation techniques; application of Analysis of Variance (ANOVA) and Principal Component Analysis (PCA), which appeared to be very efficient for preprocessing the data; and use of suitable NN design and learning method.

  9. Office Automation System and Its Security Design

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Analyzing the specialties of OAS network based on Internet/Intranet, aiming to these specialties design the OAS network's system structure. Analyzing the security threats that the OAS network faces to and the possible attacking means. This paper puts forward five security tactics and security design in detail, and a sensible conclusion is proposed at last.

  10. Home Automation System Based on Intelligent Transducer Enablers

    Directory of Open Access Journals (Sweden)

    Manuel Suárez-Albela

    2016-09-01

    Full Text Available This paper presents a novel home automation system named HASITE (Home Automation System based on Intelligent Transducer Enablers, which has been specifically designed to identify and configure transducers easily and quickly. These features are especially useful in situations where many transducers are deployed, since their setup becomes a cumbersome task that consumes a significant amount of time and human resources. HASITE simplifies the deployment of a home automation system by using wireless networks and both self-configuration and self-registration protocols. Thanks to the application of these three elements, HASITE is able to add new transducers by just powering them up. According to the tests performed in different realistic scenarios, a transducer is ready to be used in less than 13 s. Moreover, all HASITE functionalities can be accessed through an API, which also allows for the integration of third-party systems. As an example, an Android application based on the API is presented. Remote users can use it to interact with transducers by just using a regular smartphone or a tablet.

  11. Home Automation System Based on Intelligent Transducer Enablers

    Science.gov (United States)

    Suárez-Albela, Manuel; Fraga-Lamas, Paula; Fernández-Caramés, Tiago M.; Dapena, Adriana; González-López, Miguel

    2016-01-01

    This paper presents a novel home automation system named HASITE (Home Automation System based on Intelligent Transducer Enablers), which has been specifically designed to identify and configure transducers easily and quickly. These features are especially useful in situations where many transducers are deployed, since their setup becomes a cumbersome task that consumes a significant amount of time and human resources. HASITE simplifies the deployment of a home automation system by using wireless networks and both self-configuration and self-registration protocols. Thanks to the application of these three elements, HASITE is able to add new transducers by just powering them up. According to the tests performed in different realistic scenarios, a transducer is ready to be used in less than 13 s. Moreover, all HASITE functionalities can be accessed through an API, which also allows for the integration of third-party systems. As an example, an Android application based on the API is presented. Remote users can use it to interact with transducers by just using a regular smartphone or a tablet. PMID:27690031

  12. Home Automation System Based on Intelligent Transducer Enablers.

    Science.gov (United States)

    Suárez-Albela, Manuel; Fraga-Lamas, Paula; Fernández-Caramés, Tiago M; Dapena, Adriana; González-López, Miguel

    2016-09-28

    This paper presents a novel home automation system named HASITE (Home Automation System based on Intelligent Transducer Enablers), which has been specifically designed to identify and configure transducers easily and quickly. These features are especially useful in situations where many transducers are deployed, since their setup becomes a cumbersome task that consumes a significant amount of time and human resources. HASITE simplifies the deployment of a home automation system by using wireless networks and both self-configuration and self-registration protocols. Thanks to the application of these three elements, HASITE is able to add new transducers by just powering them up. According to the tests performed in different realistic scenarios, a transducer is ready to be used in less than 13 s. Moreover, all HASITE functionalities can be accessed through an API, which also allows for the integration of third-party systems. As an example, an Android application based on the API is presented. Remote users can use it to interact with transducers by just using a regular smartphone or a tablet.

  13. Automated System Organizations Under Spatial Grasp Technology

    Science.gov (United States)

    2014-06-01

    This mode of high-level system vision based on holistic and gestalt principles [6-8] rather than cooperating parts or agents [1] has psychological ...M. Wertheimer, “ Gestalt Theory“, Erlangen. Berlin, 1925. [7] P. Sapaty, “ Gestalt -Based Ideology and Technology for Spatial Control of Distributed...Dynamic Systems”, International Gestalt Theory Congress, 16th Scientific Convention of the GTA, University of Osnabrück, Germany, March 26 - 29

  14. Integration of Real-Time Data Into Building Automation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Mark J. Stunder; Perry Sebastian; Brenda A. Chube; Michael D. Koontz

    2003-04-16

    The project goal was to investigate the possibility of using predictive real-time information from the Internet as an input to building management system algorithms. The objectives were to identify the types of information most valuable to commercial and residential building owners, managers, and system designers. To comprehensively investigate and document currently available electronic real-time information suitable for use in building management systems. Verify the reliability of the information and recommend accreditation methods for data and providers. Assess methodologies to automatically retrieve and utilize the information. Characterize equipment required to implement automated integration. Demonstrate the feasibility and benefits of using the information in building management systems. Identify evolutionary control strategies.

  15. Universal system for the automation of test setups

    Science.gov (United States)

    Buturuga, Alexandru; Constantinescu, Rodica; Stoichescu, Dan

    2016-12-01

    This paper presents the concept of a universal control system for automation of small test setups. The main purpose is to control the environment in which the electronic component is being tested. The system has two device types: a master device and multiple slave devices. In this control system the devices are able to communicate with each other and are able to monitor and control specific tasks or actions required in the test flow. The system can be configured using a computer application based on text input.

  16. Towards an automated checked baggage inspection system augmented with robots

    Science.gov (United States)

    DeDonato, Matthew P.; Dimitrov, Velin; Padır, Taskin

    2014-05-01

    We present a novel system for enhancing the efficiency and accuracy of checked baggage screening process at airports. The system requirements address the identification and retrieval of objects of interest that are prohibited in a checked luggage. The automated testbed is comprised of a Baxter research robot designed by Rethink Robotics for luggage and object manipulation, and a down-looking overhead RGB-D sensor for inspection and detection. We discuss an overview of current system implementations, areas of opportunity for improvements, robot system integration challenges, details of the proposed software architecture and experimental results from a case study for identifying various kinds of lighters in checked bags.

  17. Model-Based approaches to Human-Automation Systems Design

    DEFF Research Database (Denmark)

    Jamieson, Greg A.; Andersson, Jonas; Bisantz, Ann

    2012-01-01

    Human-automation interaction in complex systems is common, yet design for this interaction is often conducted without explicit consideration of the role of the human operator. Fortunately, there are a number of modeling frameworks proposed for supporting this design activity. However, the framewo......Human-automation interaction in complex systems is common, yet design for this interaction is often conducted without explicit consideration of the role of the human operator. Fortunately, there are a number of modeling frameworks proposed for supporting this design activity. However......, the frameworks are often adapted from other purposes, usually applied to a limited range of problems, sometimes not fully described in the open literature, and rarely critically reviewed in a manner acceptable to proponents and critics alike. The present paper introduces a panel session wherein these proponents...

  18. Automated dental identification system: An aid to forensic odontology

    Directory of Open Access Journals (Sweden)

    Parvathi Devi

    2011-01-01

    Full Text Available Automated dental identification system is computer-aided software for the postmortem identification of deceased individuals based on dental characteristics specifically radiographs. This system is receiving increased attention because of the large number of victims encountered in the mass disasters and it is 90% more time saving and accurate than the conventional radiographic methods. This technique is based on the intensity of the overall region of tooth image and therefore it does not necessitate the presence of sharp boundary between the teeth. It provides automated search and matching capabilities for digitized radiographs and photographic dental images and compares the teeth present in multiple digitized dental records in order to access their similarity. This paper highlights the functionality of its components and techniques used in realizing these components.

  19. Automated screening of blood cultures with the Malthus microbiological growth analyser.

    Science.gov (United States)

    Brown, D F; Warner, M; Taylor, C E; Warren, R E

    1988-06-01

    A total of 3347 blood cultures from patients in all hospital wards were examined on a Malthus microbiological growth analyser and by a conventional system. There was no significant difference in the total numbers of positive cultures of clinical importance between the two systems (p greater than 0.05). Staphylococcus aureus, however, was isolated more often by the conventional method (p less than 0.05). Failure of the automatic detection routine limited the potential of the Malthus system for earlier detection of positive cultures. Daily visual examination of Malthus curves and subculture of bottles not promptly attached to the apparatus were necessary to avoid missing some positive cultures. False positive rates were 13% for the Malthus system and 2% for the conventional system. The contamination rate was considerably lower in the Malthus system (p less than 0.001). Further development would be necessary for the apparatus to be acceptable for routine screening of blood cultures.

  20. Automating Rule Strengths in Expert Systems.

    Science.gov (United States)

    1987-05-01

    LOOPRISS ICp. Som m ZIP C -ui ft. A00*68 (Cut. Sm &% ZIP CW$ Air Force System Command Durham, North Carolina 27706 Bolling AFB./ 6 \\ L10...These aluis aie procelsed by combinators C ana C9, attenultors A and A , and integrator I . The output of integrator 11 is thl certainty factor of...and DI are NP-Complete. DI is NP- Complete by a slight modification of Theorem 3.2 by Ibarra and Sahni [19751; since DI is a special case of DG, and

  1. Modern Solutions for Automation of Electrical Traction Power Supply Systems

    Directory of Open Access Journals (Sweden)

    Ana Mihaela Andreica

    2011-09-01

    Full Text Available This paper presents modern solutions for the automation of the electrical traction power supply system used in urban public transport (trams, trolleybuses and subway trains. The monitoring and control of this process uses SCADA distributed architectures, grouped around a central point (dispatcher who controls all field sensors, transmitters and actuators using programmable logical controllers. The presented applications refer to the Bucharest electrical transport infrastructure.

  2. 3DMADMAC|AUTOMATED: synergistic hardware and software solution for automated 3D digitization of cultural heritage objects

    Directory of Open Access Journals (Sweden)

    Robert Sitnik

    2011-12-01

    Full Text Available In this article a fully automated 3D shape measurement system and data processing algorithms are presented. Main purpose of this system is to automatically (without any user intervention and rapidly (at least ten times faster than manual measurement digitize whole object’s surface with some limitations to its properties: maximum measurement volume is described as a cylinder with 2,8m height and 0,6m radius, maximum object's weight is 2 tons.  Measurement head is automatically calibrated by the system for chosen working volume (from 120mm x 80mm x 60mm and ends up to 1,2m x 0,8m x 0,6m. Positioning of measurement head in relation to measured object is realized by computer-controlled manipulator. The system is equipped with two independent collision detection modules to prevent damaging measured object with moving sensor’s head. Measurement process is divided into three steps. First step is used for locating any part of object’s surface in assumed measurement volume. Second step is related to calculation of "next best view" position of measurement head on the base of existing 3D scans. Finally small holes in measured 3D surface are detected and measured. All 3D data processing (filtering, ICP based fitting and final views integration is performed automatically. Final 3D model is created on the base of user specified parameters like accuracy of surface representation and/or density of surface sampling. In the last section of the paper, exemplary measurement result of two objects: biscuit (from the collection of Museum Palace at Wilanów and Roman votive altar (Lower Moesia, II-III AD are presented.

  3. Solar Energy Based Automated Irrigation System

    Directory of Open Access Journals (Sweden)

    Prof. Lodhi A. K.

    2013-09-01

    Full Text Available In the field of agriculture, use of proper method of irrigation is important because the main reason is the lack of rains {&} scarcity of land reservoir water. The continuous extraction of water from earth is reducing the water level due to which lot of land is coming slowly in the zones of un-irrigated land. Another very important reason of this is due to unplanned use of water due to which a significant amount of water goes waste. For this purpose; we use this automatic plant irrigation system. In this project we use solar energy which is used to operate the irrigation pump. The circuit comprises of sensor parts built using op-amp IC LM358. Op-amp are configured here as a comparator. Two stiff copper wires are inserted in the soil to sense whether the soil is wet or dry. The Microcontroller is used to control the whole system by monitoring the sensors and when sensors sense the dry condition then the microcontroller will send command to relay driver IC the contacts of which are used to switch on the motor and it will switch off the motor when all the sensors are in wet condition. The microcontroller does the above job as it receives the signal from the sensors through the output of the comparator, and these signals operate under the control of software which is stored in ROM of the Microcontroller. The condition of the pump i.e., ON/OFF is displayed on a 16X2 LCD

  4. Warehouse automation

    OpenAIRE

    Pogačnik, Jure

    2017-01-01

    An automated high bay warehouse is commonly used for storing large number of material with a high throughput. In an automated warehouse pallet movements are mainly performed by a number of automated devices like conveyors systems, trolleys, and stacker cranes. From the introduction of the material to the automated warehouse system to its dispatch the system requires no operator input or intervention since all material movements are done automatically. This allows the automated warehouse to op...

  5. Automation of heating systems. Final report; Heizungsautomatisierung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kriesel, W.; Lange, T.; Hain, H.; Rennefahrt, J.; Schlorf, S.; Warnstorff, A.

    1998-06-30

    Modern space HVAC systems are largely automated. In order to minimize energy consumption, attempts were made to develop a generalizable, innovative automation concept with self-learning, predictive and self-optimizing automation systems. This necessitates parallel automatic online process modelling and identification. Several modelling methods for experimental process analysis were programmed and investigated, and a preliminary selection was made. As a result, the multistage GMDH algorithm and the neuronal net were followed up, and the alpha-perceptron algorithm was analyzed and evaluated. [Deutsch] Moderne Anlagen der Heizungs-, Lueftungs- und Klimatechnik sind bereits hochgradig mit Automatisierungstechnik ausgeruestet. Als ein Beitrag zur Problemloesung mit Minimierung des Gesamtenergiebedarfs wurde der Entwurf eines moeglichst verallgemeinerungsfaehigen und damit uebertragbaren innovativen Automatisierungskonzeptes mit selbsteinstellenden, lernfaehigen, praediktiven und selbstoptimierenden Automatisierungseinrichtungen angesehen. Dazu ist eine schritthaltende, automatische On-line-Prozessmodellbildung und On-line-Identifikation erforderlich. Hierfuer wurden mehrere Modellierungsmethoden fuer die experimentelle Prozessanalyse programmiert und voruntersucht sowie hieraus eine Vorauswahl getroffen. In deren Ergebnis wurde der Mehrstufige GMDH-Algorithmus sowie das Neuronale Netz weiterverfolgt und zusaetzlich der Alpha-Perzeptron-Algorithmus naeher analysiert und kritisch bewertet. (orig.)

  6. Automated Monitoring System for Waste Disposal Sites and Groundwater

    Energy Technology Data Exchange (ETDEWEB)

    S. E. Rawlinson

    2003-03-01

    A proposal submitted to the U.S. Department of Energy (DOE), Office of Science and Technology, Accelerated Site Technology Deployment (ASTD) program to deploy an automated monitoring system for waste disposal sites and groundwater, herein referred to as the ''Automated Monitoring System,'' was funded in fiscal year (FY) 2002. This two-year project included three parts: (1) deployment of cellular telephone modems on existing dataloggers, (2) development of a data management system, and (3) development of Internet accessibility. The proposed concept was initially (in FY 2002) to deploy cellular telephone modems on existing dataloggers and partially develop the data management system at the Nevada Test Site (NTS). This initial effort included both Bechtel Nevada (BN) and the Desert Research Institute (DRI). The following year (FY 2003), cellular modems were to be similarly deployed at Sandia National Laboratories (SNL) and Los Alamos National Laboratory (LANL), and the early data management system developed at the NTS was to be brought to those locations for site-specific development and use. Also in FY 2003, additional site-specific development of the complete system was to be conducted at the NTS. To complete the project, certain data, depending on site-specific conditions or restrictions involving distribution of data, were to made available through the Internet via the DRI/Western Region Climate Center (WRCC) WEABASE platform. If the complete project had been implemented, the system schematic would have looked like the figure on the following page.

  7. Methods for Automated and Continuous Commissioning of Building Systems

    Energy Technology Data Exchange (ETDEWEB)

    Larry Luskay; Michael Brambley; Srinivas Katipamula

    2003-04-30

    Avoidance of poorly installed HVAC systems is best accomplished at the close of construction by having a building and its systems put ''through their paces'' with a well conducted commissioning process. This research project focused on developing key components to enable the development of tools that will automatically detect and correct equipment operating problems, thus providing continuous and automatic commissioning of the HVAC systems throughout the life of a facility. A study of pervasive operating problems reveled the following would most benefit from an automated and continuous commissioning process: (1) faulty economizer operation; (2) malfunctioning sensors; (3) malfunctioning valves and dampers, and (4) access to project design data. Methodologies for detecting system operation faults in these areas were developed and validated in ''bare-bones'' forms within standard software such as spreadsheets, databases, statistical or mathematical packages. Demonstrations included flow diagrams and simplified mock-up applications. Techniques to manage data were demonstrated by illustrating how test forms could be populated with original design information and the recommended sequence of operation for equipment systems. Proposed tools would use measured data, design data, and equipment operating parameters to diagnosis system problems. Steps for future research are suggested to help more toward practical application of automated commissioning and its high potential to improve equipment availability, increase occupant comfort, and extend the life of system equipment.

  8. Culture systems: embryo culture and monozygotic twinning.

    Science.gov (United States)

    Sparks, Amy E

    2012-01-01

    The incidence of monozygotic twinning in pregnancies achieved with assisted reproductive technologies (ART) is significantly higher than spontaneously conceived pregnancies. The factors associated with ART that predispose the embryos to splitting are not well-characterized. Assisted hatching and extended embryo culture are two ART laboratory methods that have been risk factors for monozygotic twinning. The methods and strategies that may be employed to avoid monozygotic twinning are discussed in this chapter.

  9. An Automated System for Citizen Searches for Exoplanets

    Science.gov (United States)

    Edberg, Stephen J.

    2016-05-01

    The Panoptic Astronomical Networked OPtical observatory for Transiting Exoplanets Survey (PANOPTES) is a citizen science project which aims to build low cost, automated, robotic sky patrol camera systems which can be used to detect transiting exoplanets: planets orbiting other stars. The goal is to establish a worldwide network to image the nighttime celestial hemisphere 24/7/365. PANOPTES will search for exoplanets using the reduction in starlight caused when an exoplanet transits its host star. Individuals or groups can construct a PANOPTES station, tie it in the data reporting system, and contribute to the discovery of exoplanets across the large area of the sky not yet surveyed.

  10. Integrated Design and Analysis Environment for Safety Critical Human-Automation Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Flight deck systems, like many safety critical systems, often involve complex interactions between multiple human operators, automated subsystems, and physical...

  11. Lutetium-177 DOTATATE Production with an Automated Radiopharmaceutical Synthesis System

    Directory of Open Access Journals (Sweden)

    Alireza Aslani

    2015-07-01

    Full Text Available Objective(s: Peptide Receptor Radionuclide Therapy (PRRT with yttrium-90 (90Y and lutetium-177 (177Lu-labelled SST analogues are now therapy option for patients who have failed to respond to conventional medical therapy. In-house production with automated PRRT synthesis systems have clear advantages over manual methods resulting in increasing use in hospital-based radiopharmacies. We report on our one year experience with an automated radiopharmaceutical synthesis system.Methods: All syntheses were carried out using the Eckert & Ziegler Eurotope’s Modular-Lab Pharm Tracer® automated synthesis system. All materials and methods used were followed as instructed by the manufacturer of the system (Eckert & Ziegler Eurotope, Berlin, Germany. Sterile, GMP-certified, no-carrier added (NCA 177Lu was used with GMPcertifiedpeptide. An audit trail was also produced and saved by the system. The quality of the final product was assessed after each synthesis by ITLCSG and HPLC methods.Results: A total of 17 [177Lu]-DOTATATE syntheses were performed between August 2013 and December 2014. The amount of radioactive [177Lu]-DOTATATE produced by each synthesis varied between 10-40 GBq and was dependant on the number of patients being treated on a given day. Thirteen individuals received a total of 37 individual treatment administrations in this period. There were no issues and failures with the system or the synthesis cassettes. The average radiochemical purity as determined by ITLC was above 99% (99.8 ± 0.05% and the average radiochemical purity as determined by HPLC technique was above 97% (97.3 ± 1.5% for this period.Conclusions: The automated synthesis of [177Lu]-DOTATATE using Eckert & Ziegler Eurotope’s Modular-Lab Pharm Tracer® system is a robust, convenient and high yield approach to the radiolabelling of DOTATATE peptide benefiting from the use of NCA 177Lu and almost negligible radiation exposure of the operators.

  12. MATLAB-based automated patch-clamp system for awake behaving mice

    OpenAIRE

    Desai, Niraj S.; Siegel, Jennifer J.; Taylor, William; Chitwood, Raymond A.; Johnston, Daniel

    2015-01-01

    Automation has been an important part of biomedical research for decades, and the use of automated and robotic systems is now standard for such tasks as DNA sequencing, microfluidics, and high-throughput screening. Recently, Kodandaramaiah and colleagues (Nat Methods 9: 585–587, 2012) demonstrated, using anesthetized animals, the feasibility of automating blind patch-clamp recordings in vivo. Blind patch is a good target for automation because it is a complex yet highly stereotyped process th...

  13. Status of Wireless Technologies Used For Designing Home Automation System - A Review

    OpenAIRE

    Ashish J. Ingle; Bharti W. Gawali

    2011-01-01

    The concept of “Automation” have just started flourishing, companies have developed automated systems of their own to control alarms, sensors, actuators and video cameras and moving further the concept of automated buildings is being recognized. This Paper attempts to study standards / technologies which are used for Home Automation. In brief, concern of this Paper is to cover the detail Technical aspects of the Home Automation Standard/ Technology.

  14. Status of Wireless Technologies Used For Designing Home Automation System - A Review

    Directory of Open Access Journals (Sweden)

    Ashish J. Ingle

    2011-08-01

    Full Text Available The concept of “Automation” have just started flourishing, companies have developed automated systems of their own to control alarms, sensors, actuators and video cameras and moving further the concept of automated buildings is being recognized. This Paper attempts to study standards / technologies which are used for Home Automation. In brief, concern of this Paper is to cover the detail Technical aspects of the Home Automation Standard/ Technology.

  15. Arduino-based automation of a DNA extraction system.

    Science.gov (United States)

    Kim, Kyung-Won; Lee, Mi-So; Ryu, Mun-Ho; Kim, Jong-Won

    2015-01-01

    There have been many studies to detect infectious diseases with the molecular genetic method. This study presents an automation process for a DNA extraction system based on microfluidics and magnetic bead, which is part of a portable molecular genetic test system. This DNA extraction system consists of a cartridge with chambers, syringes, four linear stepper actuators, and a rotary stepper actuator. The actuators provide a sequence of steps in the DNA extraction process, such as transporting, mixing, and washing for the gene specimen, magnetic bead, and reagent solutions. The proposed automation system consists of a PC-based host application and an Arduino-based controller. The host application compiles a G code sequence file and interfaces with the controller to execute the compiled sequence. The controller executes stepper motor axis motion, time delay, and input-output manipulation. It drives the stepper motor with an open library, which provides a smooth linear acceleration profile. The controller also provides a homing sequence to establish the motor's reference position, and hard limit checking to prevent any over-travelling. The proposed system was implemented and its functionality was investigated, especially regarding positioning accuracy and velocity profile.

  16. Energy Production System Management - Renewable energy power supply integration with Building Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Joao [Centre of Mechatronics Engineering - CEM/Institut of Mechanical Engineering - IDMEC, University of Evora, R. Romao Ramalho, 59, 7000-671 Evora (Portugal); Martins, Joao [Centre of Technology and Systems/Faculdade de Ciencias e Tecnologia, Universidade Nova Lisboa, 1049-001 Lisboa (Portugal)

    2010-06-15

    Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the ''heart and soul'' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems. (author)

  17. Automated detection of soma location and morphology in neuronal network cultures.

    Directory of Open Access Journals (Sweden)

    Burcin Ozcan

    Full Text Available Automated identification of the primary components of a neuron and extraction of its sub-cellular features are essential steps in many quantitative studies of neuronal networks. The focus of this paper is the development of an algorithm for the automated detection of the location and morphology of somas in confocal images of neuronal network cultures. This problem is motivated by applications in high-content screenings (HCS, where the extraction of multiple morphological features of neurons on large data sets is required. Existing algorithms are not very efficient when applied to the analysis of confocal image stacks of neuronal cultures. In addition to the usual difficulties associated with the processing of fluorescent images, these types of stacks contain a small number of images so that only a small number of pixels are available along the z-direction and it is challenging to apply conventional 3D filters. The algorithm we present in this paper applies a number of innovative ideas from the theory of directional multiscale representations and involves the following steps: (i image segmentation based on support vector machines with specially designed multiscale filters; (ii soma extraction and separation of contiguous somas, using a combination of level set method and directional multiscale filters. We also present an approach to extract the soma's surface morphology using the 3D shearlet transform. Extensive numerical experiments show that our algorithms are computationally efficient and highly accurate in segmenting the somas and separating contiguous ones. The algorithms presented in this paper will facilitate the development of a high-throughput quantitative platform for the study of neuronal networks for HCS applications.

  18. A telerobotic system for automated assembly of large space structures

    Science.gov (United States)

    Rhodes, Marvin D.; Will, Ralph W.; Wise, Marion A.

    1990-01-01

    Future space missions such as polar platforms and antennas are anticipated to require large truss structures as their primary support system. During the past several years considerable research has been conducted to develop hardware and construction techniques suitable for astronaut assembly of truss structures in space. A research program has recently been initiated to develop the technology and to demonstrate the potential for automated in-space assembly of large erectable structures. The initial effort will be focused on automated assembly of a tetrahedral truss composed of 2-meter members. The facility is designed as a ground based system to permit evaluation of assembly concepts and was not designed for space qualification. The system is intended to be used as a tool from which more sophisticated procedures and operations can be developed. The facility description includes a truss structure, motionbases and a robot arm equipped with an end effector. Other considerations and requirements of the structural assembly describe computer control systems to monitor and control the operations of the assembly facility.

  19. A fully automated high-throughput training system for rodents.

    Directory of Open Access Journals (Sweden)

    Rajesh Poddar

    Full Text Available Addressing the neural mechanisms underlying complex learned behaviors requires training animals in well-controlled tasks, an often time-consuming and labor-intensive process that can severely limit the feasibility of such studies. To overcome this constraint, we developed a fully computer-controlled general purpose system for high-throughput training of rodents. By standardizing and automating the implementation of predefined training protocols within the animal's home-cage our system dramatically reduces the efforts involved in animal training while also removing human errors and biases from the process. We deployed this system to train rats in a variety of sensorimotor tasks, achieving learning rates comparable to existing, but more laborious, methods. By incrementally and systematically increasing the difficulty of the task over weeks of training, rats were able to master motor tasks that, in complexity and structure, resemble ones used in primate studies of motor sequence learning. By enabling fully automated training of rodents in a home-cage setting this low-cost and modular system increases the utility of rodents for studying the neural underpinnings of a variety of complex behaviors.

  20. Customizing Multiprocessor Implementation of an Automated Video Surveillance System

    Directory of Open Access Journals (Sweden)

    Morteza Biglari-Abhari

    2006-09-01

    Full Text Available This paper reports on the development of an automated embedded video surveillance system using two customized embedded RISC processors. The application is partitioned into object tracking and video stream encoding subsystems. The real-time object tracker is able to detect and track moving objects by video images of scenes taken by stationary cameras. It is based on the block-matching algorithm. The video stream encoding involves the optimization of an international telecommunications union (ITU-T H.263 baseline video encoder for quarter common intermediate format (QCIF and common intermediate format (CIF resolution images. The two subsystems running on two processor cores were integrated and a simple protocol was added to realize the automated video surveillance system. The experimental results show that the system is capable of detecting, tracking, and encoding QCIF and CIF resolution images with object movements in them in real-time. With low cycle-count, low-transistor count, and low-power consumption requirements, the system is ideal for deployment in remote locations.

  1. Innovative technology summary report: mobile automated characterization system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Mobile Automated Characterization System (MACS) has been developed by Oak Ridge National Laboratory (ORNL) and the Savannah River Technology Center (SRTC) for the U.S. Department of Energy's (DOE) Robotics Technology Development Program as an automated floor surface contamination characterization system. MACS was designed for use by Health Physics (HP) personnel in the performance of floor surveys of known or suspected contaminated areas, to be used during any floor characterization task which has significant open areas requiring radiological surveys. MACS was designed to automate the collection, storage and analysis of large, open floor areas, relieving the HP personnel of this portion of the floor characterization task. MACS does not require a dedicated full time operator and can be setup by the normal HP staff to survey the open areas while other techniques are used on the more constrained areas. The HP personnel performing the other characterization activities can monitor the MACS progress and address any problems encountered by MACS during survey operations. MACS is designed for unattended operation and has safety and operational monitoring functions which will safely shut the system down if any difficulties are encountered. During survey operations, MACS generates a map of surveyed areas with color-coding indicating radiation levels. This map is displayed on the control console monitor during operation and can be printed for survey result documentation. MACS produces data files containing data for all sensors used during a survey, providing a complete record of samples taken and contamination levels found for all areas traversed during a survey. This data can be processed to produce tabular output of the survey results.

  2. PUCK: An Automated Prompting System for Smart Environments: Towards achieving automated prompting; Challenges involved.

    Science.gov (United States)

    Das, Barnan; Cook, Diane J; Schmitter-Edgecombe, Maureen; Seelye, Adriana M

    2012-10-01

    The growth in popularity of smart environments has been quite steep in the last decade and so has the demand for smart health assistance systems. A smart home-based prompting system can enhance these technologies to deliver in-home interventions to users for timely reminders or brief instructions describing the way a task should be done for successful completion. This technology is in high demand given the desire of people who have physical or cognitive limitations to live independently in their homes. In this paper, with the introduction of the "PUCK" prompting system, we take an approach to automate prompting-based interventions without any predefined rule sets or user feedback. Unlike other approaches, we use simple off-the-shelf sensors and learn the timing for prompts based on real data that is collected with volunteer participants in our smart home test bed. The data mining approaches taken to solve this problem come with the challenge of an imbalanced class distribution that occurs naturally in the data. We propose a variant of an existing sampling technique, SMOTE, to deal with the class imbalance problem. To validate the approach, a comparative analysis with Cost Sensitive Learning is performed.

  3. Automated guided vehicle systems a primer with practical applications

    CERN Document Server

    Ullrich, Günter

    2015-01-01

    This primer is directed at experts and practitioners in intralogistics who are concerned with optimizing material flows. The presentation is comprehensive covering both, practical and theoretical aspects with a moderate degree of specialization, using clear and concise language. Areas of operation as well as technical standards of all relevant components and functions are described. Recent developments in technology and in the markets are taken into account. The goal of this book is to further stronger use of automated guided transport systems and the enhancement of their future performance.

  4. Mathematical models of magnetite desliming for automated quality control systems

    Science.gov (United States)

    Olevska, Yu.; Mishchenko, V.; Olevskyi, V.

    2016-10-01

    The aim of the study is to provide multifactor mathematical models suitable for use in automatic control systems of desliming process. For this purpose we described the motion of a two-phase environment regard to the shape the desliming machine and technological parameters of the enrichment process. We created the method for preparation of dependences of the enrichment process quality from the technological and design parameters. To automate the process we constructed mathematical models to justify intensive technological modes and optimal parameters for design of desliming machine.

  5. METHOD OF PLANNING CONTROL AUTOMATED SYSTEM INTEGRITY IN THE OPERATION AND SUPPORT

    Directory of Open Access Journals (Sweden)

    Anton S. Lysunets

    2014-01-01

    Full Text Available The article describes the problems of monitoring the integrity of sophisticated banking systems in the accompaniment. The understanding of the level of integrity of the automated system is described using estimates of the integrity level of the planning methodology of testing the automated banking system. Results of the article would be used in courses on Software Engineering and Banking Systems Automation

  6. Computer program for the automated attendance accounting system

    Science.gov (United States)

    Poulson, P.; Rasmusson, C.

    1971-01-01

    The automated attendance accounting system (AAAS) was developed under the auspices of the Space Technology Applications Program. The task is basically the adaptation of a small digital computer, coupled with specially developed pushbutton terminals located in school classrooms and offices for the purpose of taking daily attendance, maintaining complete attendance records, and producing partial and summary reports. Especially developed for high schools, the system is intended to relieve both teachers and office personnel from the time-consuming and dreary task of recording and analyzing the myriad classroom attendance data collected throughout the semester. In addition, since many school district budgets are related to student attendance, the increase in accounting accuracy is expected to augment district income. A major component of this system is the real-time AAAS software system, which is described.

  7. The 5th Umpire: Automating Cricket's Edge Detection System

    Directory of Open Access Journals (Sweden)

    R. Rock

    2013-02-01

    Full Text Available The game of cricket and the use of technology in the sport have grown rapidly over the past decade. However, technology-based systems introduced to adjudicate decisions such as run outs, stumpings, boundary infringements and close catches are still prone to human error, and thus their acceptance has not been fully embraced by cricketing administrators. In particular, technology is not employed for bat-pad decisions. Although the snickometer may assist in adjudicating such decisions it depends heavily on human interpretation. The aim of this study is to investigate the use of Wavelets in developing an edgedetection adjudication system for the game of cricket. Artificial Intelligence (AI tools, namely Neural Networks, will be employed to automate this edge detection process. Live audio samples of ball-on-bat and ball-on-pad events from a cricket match will be recorded. DSP analysis, feature extraction and neural network classification will then be employed on these samples. Results will show the ability of the neural network to differentiate between these key events. This is crucial to developing a fully automated edge detection system.

  8. Biocybernetic system evaluates indices of operator engagement in automated task

    Science.gov (United States)

    Pope, A. T.; Bogart, E. H.; Bartolome, D. S.

    1995-01-01

    A biocybernetic system has been developed as a method to evaluate automated flight deck concepts for compatibility with human capabilities. A biocybernetic loop is formed by adjusting the mode of operation of a task set (e.g., manual/automated mix) based on electroencephalographic (EEG) signals reflecting an operator's engagement in the task set. A critical issue for the loop operation is the selection of features of the EEG to provide an index of engagement upon which to base decisions to adjust task mode. Subjects were run in the closed-loop feedback configuration under four candidate and three experimental control definitions of an engagement index. The temporal patterning of system mode switching was observed for both positive and negative feedback of the index. The indices were judged on the basis of their relative strength in exhibiting expected feedback control system phenomena (stable operation under negative feedback and unstable operation under positive feedback). Of the candidate indices evaluated in this study, an index constructed according to the formula, beta power/(alpha power + theta power), reflected task engagement best.

  9. The effect of system aesthetics on trust, cooperation, satisfaction and annoyance in an imperfect automated system.

    Science.gov (United States)

    Weinstock, Alona; Oron-Gilad, Tal; Parmet, Yisrael

    2012-01-01

    Lack of system reliability has been repeatedly identified as a factor that decreases trust. However, aesthetics has an important role in the development of trust. Most of the research concerning the connection between aesthetics and trust focused on mobile commerce and websites while very little has been done in examining aesthetics in automated systems. This study integrated aesthetics manipulations into an imperfect in-vehicle automation system and focused on the power of aesthetics to decrease the negative effects of errors on trust, satisfaction, annoyance, and human-automation cooperation perceptions. Participants used the navigation system in either 100% or 85% accuracy levels with an aesthetic or non aesthetic system (4 conditions). In both aesthetic and non aesthetic systems, perceptions of trust, satisfaction and human automation cooperation were decreased in the imperfect system compared to the perfect one. However, in the annoyance rating, this trend was found only in the aesthetic system while in the non-aesthetic system no difference was found between the two levels of accuracy. This single effect may indicate upon the possibility that in automated systems aesthetics affects trust and satisfaction more moderately compared to mobile commerce applications and websites. However, more research is needed to assess this assumption.

  10. Identifying and Quantifying Cultural Factors That Matter to the IT Workforce: An Approach Based on Automated Content Analysis

    DEFF Research Database (Denmark)

    Schmiedel, Theresa; Müller, Oliver; Debortoli, Stefan;

    2016-01-01

    builds on 112,610 online reviews of Fortune 500 IT companies collected from Glassdoor, an online platform on which current and former employees can anonymously review companies and their management. We perform an automated content analysis to identify cultural factors that employees emphasize...... of culture and the success of companies, the validity of this approach is often discussed and researchers call for new ways of studying culture. Therefore, our research goal is to present an alternative approach to culture analysis for examining which cultural factors matter to the IT workforce. Our study...... in their reviews. Through a regression analysis on numerical employee satisfaction ratings, we find that a culture of learning and performance orientation contributes to employee motivation, while a culture of assertiveness and gender inegalitarianism has a strong negative influence on employees’ satisfaction...

  11. Automated cassette-to-cassette substrate handling system

    Science.gov (United States)

    Kraus, Joseph Arthur; Boyer, Jeremy James; Mack, Joseph; DeChellis, Michael; Koo, Michael

    2014-03-18

    An automated cassette-to-cassette substrate handling system includes a cassette storage module for storing a plurality of substrates in cassettes before and after processing. A substrate carrier storage module stores a plurality of substrate carriers. A substrate carrier loading/unloading module loads substrates from the cassette storage module onto the plurality of substrate carriers and unloads substrates from the plurality of substrate carriers to the cassette storage module. A transport mechanism transports the plurality of substrates between the cassette storage module and the plurality of substrate carriers and transports the plurality of substrate carriers between the substrate carrier loading/unloading module and a processing chamber. A vision system recognizes recesses in the plurality of substrate carriers corresponding to empty substrate positions in the substrate carrier. A processor receives data from the vision system and instructs the transport mechanism to transport substrates to positions on the substrate carrier in response to the received data.

  12. A Mobile Automated Tomographic Gamma Scanning System - 13231

    Energy Technology Data Exchange (ETDEWEB)

    Kirkpatrick, J.M.; LeBlanc, P.J.; Nakazawa, D.; Petroka, D.L.; Kane Smith, S.; Venkataraman, R.; Villani, M. [Canberra Industries, Inc. 800 Research Parkway, Meriden CT 06450 (United States)

    2013-07-01

    Canberra Industries have recently designed and built a new automated Tomographic Gamma Scanning (TGS) system for mobile deployment. The TGS technique combines high-resolution gamma spectroscopy with low spatial resolution 3-dimensional image reconstruction to provide increased accuracy over traditional approaches for the assay of non-uniform source distributions in low-to medium-density, non-heterogeneous matrices. Originally pioneered by R. Estep at Los Alamos National Laboratory (LANL), the TGS method has been further developed and commercialized by Canberra Industries in recent years. The present system advances the state of the art on several fronts: it is designed to be housed in a standard cargo transport container for ease of transport, allowing waste characterization at multiple facilities under the purview of a single operator. Conveyor feed, drum rotator, and detector and collimator positioning mechanisms operated by programmable logic control (PLC) allow automated batch mode operation. The variable geometry settings can accommodate a wide range of waste packaging, including but not limited to standard 220 liter drums, 380 liter overpack drums, and smaller 20 liter cans. A 20 mCi Eu-152 transmission source provides attenuation corrections for drum matrices up to 1 g/cm{sup 3} in TGS mode; the system can be operated in Segmented Gamma Scanning (SGS) mode to measure higher density drums. To support TGS assays at higher densities, the source shield is sufficient to house an alternate Co-60 transmission source of higher activity, up to 250 mCi. An automated shutter and attenuator assembly is provided for operating the system with a dual intensity transmission source. The system's 1500 kg capacity rotator turntable can handle heavy containers such as concrete lined 380 liter overpack drums. Finally, data acquisition utilizes Canberra's Broad Energy Germanium (BEGE) detector and Lynx MCA, with 32 k channels, providing better than 0.1 ke

  13. Development of a fully automated online mixing system for SAXS protein structure analysis

    DEFF Research Database (Denmark)

    Nielsen, Søren Skou; Arleth, Lise

    2010-01-01

    This thesis presents the development of an automated high-throughput mixing and exposure system for Small-Angle Scattering analysis on a synchrotron using polymer microfluidics. Software and hardware for both automated mixing, exposure control on a beamline and automated data reduction and prelim......This thesis presents the development of an automated high-throughput mixing and exposure system for Small-Angle Scattering analysis on a synchrotron using polymer microfluidics. Software and hardware for both automated mixing, exposure control on a beamline and automated data reduction...... and preliminary analysis is presented. Three mixing systems that have been the corner stones of the development process are presented including a fully functioning high-throughput microfluidic system that is able to produce and expose 36 mixed samples per hour using 30 μL of sample volume. The system is tested...

  14. VAPI: low-cost, rapid automated visual inspection system for Petri plate analysis

    Science.gov (United States)

    Chatburn, L. T.; Kirkup, B. C.; Polz, M. F.

    2007-09-01

    Most culture-based microbiology tasks utilize a petri plate during processing, but rarely do the scientists capture the full information available from the plate. In particular, visual analysis of plates is an under-developed rich source of data that can be rapid and non-invasive. However, collecting this data has been limited by the difficulties of standardizing and quantifying human observations, by the limits of a scientists' fatigue, and by the cost of automating the process. The availability of specialized counting equipment and intelligent camera systems has not changed this - they are prohibitively expensive for many laboratories, only process a limited number of plate types, are often destructive to the sample, and have limited accuracy. This paper describes an automated visual inspection solution, VAPI, that employs inexpensive consumer computing hardware and digital cameras along with custom cross-platform open-source software written in C++, combining Trolltech's Qt GUI toolkit with Intel's OpenCV computer vision library. The system is more accurate than common commercial systems costing many times as much, while being flexible in use and offering comparable responsiveness. VAPI not only counts colonies but also sorts and enumerates colonies by morphology, tracks colony growth by time series analysis, and provides other analytical resources. Output to XML files or directly to a database provides data that can be easily maintained and manipulated by the end user, offering ready access for system enhancement, interaction with other software systems, and rapid development of advanced analysis applications.

  15. Accounting Automation

    OpenAIRE

    Laynebaril1

    2017-01-01

    Accounting Automation   Click Link Below To Buy:   http://hwcampus.com/shop/accounting-automation/  Or Visit www.hwcampus.com Accounting Automation” Please respond to the following: Imagine you are a consultant hired to convert a manual accounting system to an automated system. Suggest the key advantages and disadvantages of automating a manual accounting system. Identify the most important step in the conversion process. Provide a rationale for your response. ...

  16. A Semi-automated Peer-review System

    CERN Document Server

    Alicea, Bradly

    2013-01-01

    A semi-supervised model of peer review is introduced that is intended to overcome the bias and incompleteness of traditional peer review. Traditional approaches are reliant on human biases, while consensus decision-making is constrained by sparse information. Here, the architecture for one potential improvement (a semi-supervised, human-assisted classifier) to the traditional approach will be introduced and evaluated. To evaluate the potential advantages of such a system, hypothetical receiver operating characteristic (ROC) curves for both approaches will be assessed. This will provide more specific indications of how automation would be beneficial in the manuscript evaluation process. In conclusion, the implications for such a system on measurements of scientific impact and improving the quality of open submission repositories will be discussed.

  17. Quantitative Vulnerability Assessment of Cyber Security for Distribution Automation Systems

    Directory of Open Access Journals (Sweden)

    Xiaming Ye

    2015-06-01

    Full Text Available The distribution automation system (DAS is vulnerable to cyber-attacks due to the widespread use of terminal devices and standard communication protocols. On account of the cost of defense, it is impossible to ensure the security of every device in the DAS. Given this background, a novel quantitative vulnerability assessment model of cyber security for DAS is developed in this paper. In the assessment model, the potential physical consequences of cyber-attacks are analyzed from two levels: terminal device level and control center server level. Then, the attack process is modeled based on game theory and the relationships among different vulnerabilities are analyzed by introducing a vulnerability adjacency matrix. Finally, the application process of the proposed methodology is illustrated through a case study based on bus 2 of the Roy Billinton Test System (RBTS. The results demonstrate the reasonability and effectiveness of the proposed methodology.

  18. Tactical Automated Security System Air Force expeditionary security

    Science.gov (United States)

    Butler, Ken

    2002-08-01

    The US Air Force's TASS (Tactical Automated Security System) program has been in existence since 1996. The TASS program meets the growing need to supplement security personnel with modern technology, when these forces are deployed around the world. TASS combines five equipment elements into an integrated security solution, providing both a detection and an assessment capability. TASS does this in a way which maximizes the mobility and user friendliness objectives of the system. In this paper, we will take a closer look at TASS. We will examine the concepts that drive the TASS development process. We will provide an overview of the TASS technical elements, and provide a roadmap for further development of those elements. Finally, we will provide recommendations to security providers who aim to have their products included in the TASS baseline of equipment.

  19. Modular implementation of a digital hardware design automation system

    Science.gov (United States)

    Masud, M.

    An automation system based on AHPL (A Hardware Programming Language) was developed. The project may be divided into three distinct phases: (1) Upgrading of AHPL to make it more universally applicable; (2) Implementation of a compiler for the language; and (3) illustration of how the compiler may be used to support several phases of design activities. Several new features were added to AHPL. These include: application-dependent parameters, mutliple clocks, asynchronous results, functional registers and primitive functions. The new language, called Universal AHPL, has been defined rigorously. The compiler design is modular. The parsing is done by an automatic parser generated from the SLR(1)BNF grammar of the language. The compiler produces two data bases from the AHPL description of a circuit. The first one is a tabular representation of the circuit, and the second one is a detailed interconnection linked list. The two data bases provide a means to interface the compiler to application-dependent CAD systems.

  20. PR-PR: cross-platform laboratory automation system.

    Science.gov (United States)

    Linshiz, Gregory; Stawski, Nina; Goyal, Garima; Bi, Changhao; Poust, Sean; Sharma, Monica; Mutalik, Vivek; Keasling, Jay D; Hillson, Nathan J

    2014-08-15

    To enable protocol standardization, sharing, and efficient implementation across laboratory automation platforms, we have further developed the PR-PR open-source high-level biology-friendly robot programming language as a cross-platform laboratory automation system. Beyond liquid-handling robotics, PR-PR now supports microfluidic and microscopy platforms, as well as protocol translation into human languages, such as English. While the same set of basic PR-PR commands and features are available for each supported platform, the underlying optimization and translation modules vary from platform to platform. Here, we describe these further developments to PR-PR, and demonstrate the experimental implementation and validation of PR-PR protocols for combinatorial modified Golden Gate DNA assembly across liquid-handling robotic, microfluidic, and manual platforms. To further test PR-PR cross-platform performance, we then implement and assess PR-PR protocols for Kunkel DNA mutagenesis and hierarchical Gibson DNA assembly for microfluidic and manual platforms.

  1. PR-PR: Cross-Platform Laboratory Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Linshiz, G; Stawski, N; Goyal, G; Bi, CH; Poust, S; Sharma, M; Mutalik, V; Keasling, JD; Hillson, NJ

    2014-08-01

    To enable protocol standardization, sharing, and efficient implementation across laboratory automation platforms, we have further developed the PR-PR open-source high-level biology-friendly robot programming language as a cross-platform laboratory automation system. Beyond liquid-handling robotics, PR-PR now supports microfluidic and microscopy platforms, as well as protocol translation into human languages, such as English. While the same set of basic PR-PR commands and features are available for each supported platform, the underlying optimization and translation modules vary from platform to platform. Here, we describe these further developments to PR-PR, and demonstrate the experimental implementation and validation of PR-PR protocols for combinatorial modified Golden Gate DNA assembly across liquid-handling robotic, microfluidic, and manual platforms. To further test PR-PR cross-platform performance, we then implement and assess PR-PR protocols for Kunkel DNA mutagenesis and hierarchical Gibson DNA assembly for microfluidic and manual platforms.

  2. Evaluation of the Paratrend Multi-Analyte Sensor for Potential Utilization in Long-Duration Automated Cell Culture Monitoring

    Science.gov (United States)

    Hwang, Emma Y.; Pappas, Dimitri; Jeevarajan, Antony S.; Anderson, Melody M.

    2004-01-01

    BACKGROUND: Compact and automated sensors are desired for assessing the health of cell cultures in biotechnology experiments. While several single-analyte sensors exist to measure culture health, a multi-analyte sensor would simplify the cell culture system. One such multi-analyte sensor, the Paratrend 7 manufactured by Diametrics Medical, consists of three optical fibers for measuring pH, dissolved carbon dioxide (pCO(2)), dissolved oxygen (pO(2)), and a thermocouple to measure temperature. The sensor bundle was designed for intra-vascular measurements in clinical settings, and can be used in bioreactors operated both on the ground and in NASA's Space Shuttle and International Space Station (ISS) experiments. METHODS: A Paratrend 7 sensor was placed at the outlet of a bioreactor inoculated with BHK-21 (baby hamster kidney) cells. The pH, pCO(2), pO(2), and temperature data were transferred continuously to an external computer. Cell culture medium, manually extracted from the bioreactor through a sampling port, was also assayed using a bench top blood gas analyzer (BGA). RESULTS: Two Paratrend 7 sensors were used over a single cell culture experiment (64 days). When compared to the manually obtained BGA samples, the sensor had good agreement for pH, pCO(2), and pO(2) with bias (and precision) 0.005(0.024), 8.0 mmHg (4.4 mmHg), and 11 mmHg (17 mmHg), respectively for the first two sensors. A third Paratrend sensor (operated for 141 days) had similar agreement (0.02+/-0.15 for pH, -4+/-8 mm Hg for pCO(2), and 24+/-18 mmHg for pO(2)). CONCLUSION: The resulting biases and precisions are com- parable to Paratrend sensor clinical results. Although the pO(2) differences may be acceptable for clinically relevant measurement ranges, the O(2) sensor in this bundle may not be reliable enough for the ranges of pO(2) in these cell culture studies without periodic calibration.

  3. Precision Relative Positioning for Automated Aerial Refueling from a Stereo Imaging System

    Science.gov (United States)

    2015-03-01

    PRECISION RELATIVE POSITIONING FOR AUTOMATED AERIAL REFUELING FROM A STEREO IMAGING SYSTEM THESIS Kyle P. Werner, 2Lt, USAF AFIT-ENG-MS-15-M-048...Government and is not subject to copyright protection in the United States. AFIT-ENG-MS-15-M-048 PRECISION RELATIVE POSITIONING FOR AUTOMATED AERIAL...RELEASE; DISTRIBUTION UNLIMITED. AFIT-ENG-MS-15-M-048 PRECISION RELATIVE POSITIONING FOR AUTOMATED AERIAL REFUELING FROM A STEREO IMAGING SYSTEM THESIS

  4. Achieving Lights-Out Operation of SMAP Using Ground Data System Automation

    Science.gov (United States)

    Sanders, Antonio

    2013-01-01

    The approach used in the SMAP ground data system to provide reliable, automated capabilities to conduct unattended operations has been presented. The impacts of automation on the ground data system architecture were discussed, including the three major automation patterns identified for SMAP and how these patterns address the operations use cases. The architecture and approaches used by SMAP will set the baseline for future JPL Earth Science missions.

  5. ATTEMPTS TO AUTOMATE THE PROCESS OF GENERATION OF ORTHOIMAGES OF OBJECTS OF CULTURAL HERITAGE

    Directory of Open Access Journals (Sweden)

    J. S. Markiewicz

    2015-02-01

    Full Text Available At present, digital documentation recorded in the form of raster or vector files is the obligatory way of inventorying historical objects. The orthoimage is a cartometric form of photographic presentation of information in the two-dimensional reference system. The paper will discuss the issue of automation of the orthoimage generation basing on the TLS data and digital images. At present attempts are made to apply modern technologies not only for the needs of surveys, but also during the data processing. This paper will present attempts aiming at utilisation of appropriate algorithms and the author’s application for automatic generation of the projection plane, for the needs of acquisition of intensity orthoimages from the TLS data. Such planes are defined manually in the majority of popular TLS data processing applications. A separate issue related to the RGB image generation is the orientation of digital images in relation to scans. It is important, in particular in such cases when scans and photographs are not taken simultaneously. This paper will present experiments concerning the utilisation of the SIFT algorithm for automatic matching of intensity orthoimages of the intensity and digital (RGB photographs. Satisfactory results of the process of automation, as well as in relation to the quality of resulting orthoimages have been obtained.

  6. Automation of the CFD Process on Distributed Computing Systems

    Science.gov (United States)

    Tejnil, Ed; Gee, Ken; Rizk, Yehia M.

    2000-01-01

    A script system was developed to automate and streamline portions of the CFD process. The system was designed to facilitate the use of CFD flow solvers on supercomputer and workstation platforms within a parametric design event. Integrating solver pre- and postprocessing phases, the fully automated ADTT script system marshalled the required input data, submitted the jobs to available computational resources, and processed the resulting output data. A number of codes were incorporated into the script system, which itself was part of a larger integrated design environment software package. The IDE and scripts were used in a design event involving a wind tunnel test. This experience highlighted the need for efficient data and resource management in all parts of the CFD process. To facilitate the use of CFD methods to perform parametric design studies, the script system was developed using UNIX shell and Perl languages. The goal of the work was to minimize the user interaction required to generate the data necessary to fill a parametric design space. The scripts wrote out the required input files for the user-specified flow solver, transferred all necessary input files to the computational resource, submitted and tracked the jobs using the resource queuing structure, and retrieved and post-processed the resulting dataset. For computational resources that did not run queueing software, the script system established its own simple first-in-first-out queueing structure to manage the workload. A variety of flow solvers were incorporated in the script system, including INS2D, PMARC, TIGER and GASP. Adapting the script system to a new flow solver was made easier through the use of object-oriented programming methods. The script system was incorporated into an ADTT integrated design environment and evaluated as part of a wind tunnel experiment. The system successfully generated the data required to fill the desired parametric design space. This stressed the computational

  7. Home Automation

    OpenAIRE

    Ahmed, Zeeshan

    2010-01-01

    In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

  8. Automation, decision support, and expert systems in nephrology.

    Science.gov (United States)

    Soman, Sandeep; Zasuwa, Gerard; Yee, Jerry

    2008-01-01

    Increasing data suggest that errors in medicine occur frequently and result in substantial harm to the patient. The Institute of Medicine report described the magnitude of the problem, and public interest in this issue, which was already large, has grown. The traditional approach in medicine has been to identify the persons making the errors and recommend corrective strategies. However, it has become increasingly clear that it is more productive to focus on the systems and processes through which care is provided. If these systems are set up in ways that would both make errors less likely and identify those that do occur and, at the same time, improve efficiency, then safety and productivity would be substantially improved. Clinical decision support systems (CDSSs) are active knowledge systems that use 2 or more items of patient data to generate case specific recommendations. CDSSs are typically designed to integrate a medical knowledge base, patient data, and an inference engine to generate case specific advice. This article describes how automation, templating, and CDSS improve efficiency, patient care, and safety by reducing the frequency and consequences of medical errors in nephrology. We discuss practical applications of these in 3 settings: a computerized anemia-management program (CAMP, Henry Ford Health System, Detroit, MI), vascular access surveillance systems, and monthly capitation notes in the hemodialysis unit.

  9. Analysis of automated highway system risks and uncertainties. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Sicherman, A.

    1994-10-01

    This volume describes a risk analysis performed to help identify important Automated Highway System (AHS) deployment uncertainties and quantify their effect on costs and benefits for a range of AHS deployment scenarios. The analysis identified a suite of key factors affecting vehicle and roadway costs, capacities and market penetrations for alternative AHS deployment scenarios. A systematic protocol was utilized for obtaining expert judgments of key factor uncertainties in the form of subjective probability percentile assessments. Based on these assessments, probability distributions on vehicle and roadway costs, capacity and market penetration were developed for the different scenarios. The cost/benefit risk methodology and analysis provide insights by showing how uncertainties in key factors translate into uncertainties in summary cost/benefit indices.

  10. Forced versus free traffic in an automated milking system

    DEFF Research Database (Denmark)

    Munksgaard, Lene; Rushen, J.; de Passillé, A.M.;

    2011-01-01

    Cows in automated milking systems with free access to feeders sometimes show a reduced use of the robotic milkers, while forced traffic where cows have to pass through the robot to reach the feeders may reduce feeding time and frequency. We examined two groups of 35 lactating cows. For 21 d, one....... The average number of visits to the robot, either with or without milking, did not differ between the two types of traffic. On average cows lay down for 12.3 h/d, with no significant difference between free and forced traffic. The type of traffic did not affect the duration of time spent in the feeding area....... With both forced and free traffic, there was marked diurnal variation in feeding, with relatively little feeding occurring between 2200 h and 0800 h. Use of forced traffic did not reduce feeding time. It did not improve access to the robot milker or eliminate diurnal variation. Differences between cows...

  11. Automated Contingency Management for Advanced Propulsion Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Impact Technologies LLC, in cooperation the Georgia Institute of Technology, proposes to develop and demonstrate an innovative Automated Contingency Management (ACM)...

  12. 10 CFR 1017.28 - Processing on Automated Information Systems (AIS).

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Processing on Automated Information Systems (AIS). 1017.28... UNCLASSIFIED CONTROLLED NUCLEAR INFORMATION Physical Protection Requirements § 1017.28 Processing on Automated Information Systems (AIS). UCNI may be processed or produced on any AIS that complies with the guidance in...

  13. Design of Coal Mine Integrated Automation System Based on NetLinx

    Institute of Scientific and Technical Information of China (English)

    DING En-jie; ZHANG Shen

    2003-01-01

    A network structure of coalmine integrated automation system based on NetLinx was proposed. The features of three-layer-network structure were discussed in detail. The mechanism of time determination of the network was analyzed. A design example of the integrated automation system for a real coalmine was presented.

  14. Construction of cryptographic information protection in automated control systems for rapid reaction military forces

    Directory of Open Access Journals (Sweden)

    Sergey Petrovich Evseev

    2012-04-01

    Full Text Available New approaches to realizations of military operations are analyzed. The main factors that directly affect the construction and operation of information security subsystems in prospective automated command and control military systems are described. Possible ways of the construction of cryptographic subsystems of information protection in automated operation management systems for united military force groups are investigated.

  15. 47 CFR 73.4097 - EBS (now EAS) attention signals on automated programing systems.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false EBS (now EAS) attention signals on automated programing systems. 73.4097 Section 73.4097 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... (now EAS) attention signals on automated programing systems. See Public Notice dated March 1, 1979....

  16. Scheduling vehicles in automated transportation systems Algorithms and case study: Algorithms and case study

    NARCIS (Netherlands)

    Heijden, van der Matthieu; Ebben, Mark; Gademann, Noud; Harten, van Aart

    2002-01-01

    One of the major planning issues in large scale automated transportation systems is so-called empty vehicle management, the timely supply of vehicles to terminals in order to reduce cargo waiting times. Motivated by a Dutch pilot project on an underground cargo transportation system using Automated

  17. Growth detection failures by the nonradiometric Bactec MGIT 960 mycobacterial culture system.

    Science.gov (United States)

    Peña, Jeremy A; Ferraro, Mary Jane; Hoffman, Colleen G; Branda, John A

    2012-06-01

    Mycobacterial growth in liquid culture can go undetected by automated, nonradiometric growth detection systems. In our laboratory, instrument-negative tubes from the Bactec MGIT 960 system are inspected visually for clumps suggestive of mycobacterial growth, which (if present) are examined by acid-fast smear analysis. A 3-year review demonstrated that ∼1% of instrument-negative MGIT cultures contained mycobacterial growth and that 10% of all cultures yielding mycobacteria were instrument negative. Isolates from instrument-negative MGIT cultures included both tuberculous and nontuberculous mycobacteria.

  18. A scheme for a future distribution automation system in Finnish utilities

    Energy Technology Data Exchange (ETDEWEB)

    Lehtonen, M.; Kaerkkaeinen, S. [VTT Energy, Espoo (Finland); Partanen, J. [Lappeenranta Univ. of Technology (Finland)

    1998-08-01

    This presentation summarizes the results of a project, the aim of which was to define the optimal set of functions for the future distribution automation (DA) systems in Finland. The general factors, which affect the automation needs, are first discussed. The benefits of various functions of DA and demand side management (DSM) are then studied. Next a computer model for a DA feasibility analysis is presented, and some computation results are given. From these, the proposed automation scheme is finally concluded

  19. A scheme for a future distribution automation system in Finnish utilities

    Energy Technology Data Exchange (ETDEWEB)

    Lehtonen, M.; Kaerkkaeinen, S. [VTT Energy, Espoo (Finland); Partanen, J. [Lappeenranta Univ. of Technology (Finland)

    1996-12-31

    This presentation summarizes the results of a project, the aim of which was to define the optimal set of functions for the future distribution automation (DA) systems in Finland. The general factors. which affect the automation needs, are first discussed. The benefits of various functions of DA and demand side management (DSM) are then studied. Next a computer model for a DA feasibility analysis is presented, and some computation results are given. From these. the proposed automation scheme is finally concluded

  20. Micro-irrigation systems, automation and fertigation in citrus

    Directory of Open Access Journals (Sweden)

    Parameshwar Sidramappa Shirgure

    2012-11-01

    Full Text Available Citrus is number one group of fruits grown in more than 140 countries in the world. Micro-irrigation systems and fertigation management is one of the main concerns of the modem citrus fruit production irrespective of availability of soil, water and fertilizer resources. A variety of recommendations have emerged world over on irrigation systems and fertigation based on soil and leaf analysis of the nutrients, evapo-transpiration and water use pattern. The research review of literature has revealed best promising results on irrigation scheduling based on depletion pattern of soil available water content, irrigation systems and fertigation. Various micro-irrigation systems have established their superiority over traditionally used flood irrigation with micro-jets having little edge over rest of the others. Similarly, fertigation has shown good responses on growth, yield, quality and uniform distribution pattern of applied nutrients within the plant rootzone compared to band placement involving comparatively localized fertilization. Automated fertigation in citrus orchards is a new concept, which would be the only solitary choice amongst many irrigation monitoring methods in near future. The present status of the review on micro-irrigation and fertigation in citrus cultivars is clearly indicated in this article.

  1. A robotic system for automation of logistics functions on the Space Station

    Science.gov (United States)

    Martin, J. C.; Purves, R. B.; Hosier, R. N.; Krein, B. A.

    1988-01-01

    Spacecraft inventory management is currently performed by the crew and as systems become more complex, increased crew time will be required to perform routine logistics activities. If future spacecraft are to function effectively as research labs and production facilities, the efficient use of crew time as a limited resource for performing mission functions must be employed. The use of automation and robotics technology, such as automated warehouse and materials handling functions, can free the crew from many logistics tasks and provide more efficient use of crew time. Design criteria for a Space Station Automated Logistics Inventory Management System is focused on through the design and demonstration of a mobile two armed terrestrial robot. The system functionally represents a 0 gravity automated inventory management system and the problems associated with operating in such an environment. Features of the system include automated storage and retrieval, item recognition, two armed robotic manipulation, and software control of all inventory item transitions and queries.

  2. Cultural systems for growing potatoes in space

    Science.gov (United States)

    Tibbitts, T.; Bula, R.; Corey, R.; Morrow, R.

    1988-01-01

    Higher plants are being evaluated for life support to provide needed food, oxygen and water as well as removal of carbon dioxide from the atmosphere. The successful utilization of plants in space will require the development of not only highly productive growing systems but also highly efficient bioregenerative systems. It will be necessary to recycle all inedible plant parts and all human wastes so that the entire complement of elemental compounds can be reused. Potatoes have been proposed as one of the desirable crops because they are 1) extremely productive, yielding more than 100 metric tons per hectare from field plantings, 2) the edible tubers are high in digestible starch (70%) and protein (10%) on a dry weight basis, 3) up to 80% of the total plant production is in tubers and thus edible, 4) the plants are easily propagated either from tubers or from tissue culture plantlets, 5) the tubers can be utilized with a minimum of processing, and 6) potatoes can be prepared in a variety of different forms for the human diet (Tibbitts et al., 1982). However potatoes have a growth pattern that complicates the development of growing the plants in controlled systems. Tubers are borne on underground stems that are botanically termed 'rhizomes', but in common usage termed 'stolons'. The stolons must be maintained in a dark, moist area with sufficient provision for enlargement of tubers. Stems rapidly terminate in flowers forcing extensive branching and spreading of plants so that individual plants will cover 0.2 m2 or more area. Thus the growing system must be developed to provide an area that is darkened for tuber and root growth and of sufficient size for plant spread. A system developed for growing potatoes, or any plants, in space will have certain requirements that must be met to make them a useful part of a life support system. The system must 1) be constructed of materials, and involve media, that can be reused for many successive cycles of plant growth, 2

  3. A Semi-Automated Positioning System for contact-mode Atomic Force Microscopy (AFM).

    Science.gov (United States)

    Roy, Rajarshi; Chen, Wenjin; Cong, Lei; Goodell, Lauri A; Foran, David J; Desai, Jaydev P

    2013-04-01

    Contact mode Atomic Force Microscopy (CM-AFM) is popularly used by the biophysics community to study mechanical properties of cells cultured in petri dishes, or tissue sections fixed on microscope slides. While cells are fairly easy to locate, sampling in spatially heterogeneous tissue specimens is laborious and time-consuming at higher magnifications. Furthermore, tissue registration across multiple magnifications for AFM-based experiments is a challenging problem, suggesting the need to automate the process of AFM indentation on tissue. In this work, we have developed an image-guided micropositioning system to align the AFM probe and human breast-tissue cores in an automated manner across multiple magnifications. Our setup improves efficiency of the AFM indentation experiments considerably. Note to Practitioners: Human breast tissue is by nature heterogeneous, and in the samples we studied, epithelial tissue is formed by groups of functional breast epithelial cells that are surrounded by stromal tissue in a complex intertwined way. Therefore sampling a specific cell type on an unstained specimen is very difficult. To aid us, we use digital stained images of the same tissue annotated by a certified pathologist to identify the region of interest (ROI) at a coarse magnification and an image-guided positioning system to place the unstained tissue near the AFM probe tip. Using our setup, we could considerably reduce AFM operating time and we believe that our setup is a viable supplement to commercial AFM stages with limited X-Y range.

  4. Texas Automated Buoy System 1995-2005 and Beyond

    Science.gov (United States)

    Guinasso, N. L.; Bender, L. C.; Walpert, J. N.; Lee, L. L.; Campbell, L.; Hetland, R. D.; Howard, M. K.; Martin, R. D.

    2005-05-01

    TABS was established in l995 to provide data to assess oil spill movement along Texas coast for the Texas General Land Office Oil Spill Prevention and Response Program. A system of nine automated buoys provide wind and current data in near real time. Two of these buoys are supported by the Flower Garden Banks Joint Industry Program. A TABS web site provides a public interface to view and download the data. A real time data analysis web page presents a wide variety of useful data products derived from the field measurements. Integration efforts now underway include transfer of buoy data to the National Data Buoy Center for quality control and incorporation into the Global Telecommunications Stream. The TGLO ocean circulation nowcast/forecast modeling system has been in continuous operation since 1998. Two models, POM and ROMS, are used to produce forecasts of near-surface wind driven currents up to 48 hours into the future. Both models are driven using wind fields obtained from the NAM (formerly Eta) forecast models operated by NOAA NCEP. Wind and current fields are displayed on websites in both static and animated forms and are updated four times per day. Under funding from the SURA/SCOOP program we are; 1) revamping the system to conform with the evolving Data Management and Communications (DMAC) framework adopted by the NSF Orion and OCEAN.US IOOS programs, 2) producing model-data comparisons, and 3) integrating the wind and current fields into the GNOME oil trajectory model used by NOAA/Hazmat. Academic research is planned to assimilate near real-time observations from TABS buoys and some 30-40 ADCP instruments scheduled to be mounted on offshore oil platforms in early 2005. Texas Automated Buoy System (TABS) and its associated modeling efforts provide a reliable source of accurate, up-to-date information on currents along the Texas coast. As the nation embarks on the development of an Integrated Ocean Observing System (IOOS), TABS will be an active participant

  5. Development of an automated scoring system for plant comet assay

    Directory of Open Access Journals (Sweden)

    Bertrand Pourrut

    2015-05-01

    -\tnucleus density: increase the density of nuclei is of importance to increase scoring reliability (Sharma et al., 2012. In conclusion, increasing plant nucleus extraction yield and automated scoring of nuclei do represent big challenges. However, our promising preliminary results open up the perspective of an automated high-throughput scoring of plant nuclei.

  6. Towards Culturally-Aware Virtual Agent Systems

    DEFF Research Database (Denmark)

    Endrass, Birgit; André, Elisabeth; Rehm, Matthias

    2010-01-01

    of different systems using virtual agents need to be considered. Therefore, the authors reflect in this chapter on how virtual agents can help to learn about culture, scan definitions of culture from the social sciences, give an overview on how multiagent systems developed over time and classify the state...... of the art that integrates culture in multiagent systems. In addition, an approach of simulating culture-specific behavior using such a multiagent system is introduced and future trends in enculturating virtual agent systems are outlined....

  7. A Distributed Intelligent Automated Demand Response Building Management System

    Energy Technology Data Exchange (ETDEWEB)

    Auslander, David; Culler, David; Wright, Paul; Lu, Yan; Piette, Mary

    2013-12-30

    The goal of the 2.5 year Distributed Intelligent Automated Demand Response (DIADR) project was to reduce peak electricity load of Sutardja Dai Hall at UC Berkeley by 30% while maintaining a healthy, comfortable, and productive environment for the occupants. We sought to bring together both central and distributed control to provide “deep” demand response1 at the appliance level of the building as well as typical lighting and HVAC applications. This project brought together Siemens Corporate Research and Siemens Building Technology (the building has a Siemens Apogee Building Automation System (BAS)), Lawrence Berkeley National Laboratory (leveraging their Open Automated Demand Response (openADR), Auto-­Demand Response, and building modeling expertise), and UC Berkeley (related demand response research including distributed wireless control, and grid-­to-­building gateway development). Sutardja Dai Hall houses the Center for Information Technology Research in the Interest of Society (CITRIS), which fosters collaboration among industry and faculty and students of four UC campuses (Berkeley, Davis, Merced, and Santa Cruz). The 141,000 square foot building, occupied in 2009, includes typical office spaces and a nanofabrication laboratory. Heating is provided by a district heating system (steam from campus as a byproduct of the campus cogeneration plant); cooling is provided by one of two chillers: a more typical electric centrifugal compressor chiller designed for the cool months (Nov-­ March) and a steam absorption chiller for use in the warm months (April-­October). Lighting in the open office areas is provided by direct-­indirect luminaries with Building Management System-­based scheduling for open areas, and occupancy sensors for private office areas. For the purposes of this project, we focused on the office portion of the building. Annual energy consumption is approximately 8053 MWh; the office portion is estimated as 1924 MWh. The maximum peak load

  8. A Distributed Intelligent Automated Demand Response Building Management System

    Energy Technology Data Exchange (ETDEWEB)

    Auslander, David [Univ. of California, Berkeley, CA (United States); Culler, David [Univ. of California, Berkeley, CA (United States); Wright, Paul [Univ. of California, Berkeley, CA (United States); Lu, Yan [Siemens Corporate Research Inc., Princeton, NJ (United States); Piette, Mary [Univ. of California, Berkeley, CA (United States)

    2013-03-31

    The goal of the 2.5 year Distributed Intelligent Automated Demand Response (DIADR) project was to reduce peak electricity load of Sutardja Dai Hall at UC Berkeley by 30% while maintaining a healthy, comfortable, and productive environment for the occupants. We sought to bring together both central and distributed control to provide “deep” demand response1 at the appliance level of the building as well as typical lighting and HVAC applications. This project brought together Siemens Corporate Research and Siemens Building Technology (the building has a Siemens Apogee Building Automation System (BAS)), Lawrence Berkeley National Laboratory (leveraging their Open Automated Demand Response (openADR), Auto-­Demand Response, and building modeling expertise), and UC Berkeley (related demand response research including distributed wireless control, and grid-­to-­building gateway development). Sutardja Dai Hall houses the Center for Information Technology Research in the Interest of Society (CITRIS), which fosters collaboration among industry and faculty and students of four UC campuses (Berkeley, Davis, Merced, and Santa Cruz). The 141,000 square foot building, occupied in 2009, includes typical office spaces and a nanofabrication laboratory. Heating is provided by a district heating system (steam from campus as a byproduct of the campus cogeneration plant); cooling is provided by one of two chillers: a more typical electric centrifugal compressor chiller designed for the cool months (Nov-­ March) and a steam absorption chiller for use in the warm months (April-­October). Lighting in the open office areas is provided by direct-­indirect luminaries with Building Management System-­based scheduling for open areas, and occupancy sensors for private office areas. For the purposes of this project, we focused on the office portion of the building. Annual energy consumption is approximately 8053 MWh; the office portion is estimated as 1924 MWh. The maximum peak load

  9. Method and System for Protection of Automated Control Systems for “Smart Buildings”

    Directory of Open Access Journals (Sweden)

    Dmitry Mikhaylov

    2013-07-01

    Full Text Available The paper is related to system and method for protection of an automated control system (ACS against un-authorized devices connected to the ACS via wired or wireless channels that substantially obviates the disadvantages of the related art. The protection system monitors the signals spreading in the network analyzing the performance of the network for malicious code or hidden connections of attacker. The system is developed specifically for this purpose and it can protect the industrial control systems more effectively than standard anti-virus programs. Specific anti-virus software installed on a central server of the automated control system protects it from software-based attacks both from internal and external offenders. The system comprises a plurality of bus protection devices of different types, including any of a twisted-pair protection device, a power lines protection device, On-Board Diagnostics signal protocol protection device, and a wireless protection device.

  10. Aviation Safety: Modeling and Analyzing Complex Interactions between Humans and Automated Systems

    Science.gov (United States)

    Rungta, Neha; Brat, Guillaume; Clancey, William J.; Linde, Charlotte; Raimondi, Franco; Seah, Chin; Shafto, Michael

    2013-01-01

    The on-going transformation from the current US Air Traffic System (ATS) to the Next Generation Air Traffic System (NextGen) will force the introduction of new automated systems and most likely will cause automation to migrate from ground to air. This will yield new function allocations between humans and automation and therefore change the roles and responsibilities in the ATS. Yet, safety in NextGen is required to be at least as good as in the current system. We therefore need techniques to evaluate the safety of the interactions between humans and automation. We think that current human factor studies and simulation-based techniques will fall short in front of the ATS complexity, and that we need to add more automated techniques to simulations, such as model checking, which offers exhaustive coverage of the non-deterministic behaviors in nominal and off-nominal scenarios. In this work, we present a verification approach based both on simulations and on model checking for evaluating the roles and responsibilities of humans and automation. Models are created using Brahms (a multi-agent framework) and we show that the traditional Brahms simulations can be integrated with automated exploration techniques based on model checking, thus offering a complete exploration of the behavioral space of the scenario. Our formal analysis supports the notion of beliefs and probabilities to reason about human behavior. We demonstrate the technique with the Ueberligen accident since it exemplifies authority problems when receiving conflicting advices from human and automated systems.

  11. CERES AuTomAted job Loading SYSTem (CATALYST): An automated workflow manager for satellite data production

    Science.gov (United States)

    Gleason, J. L.; Hillyer, T. N.; Wilkins, J.

    2012-12-01

    The CERES Science Team integrates data from 5 CERES instruments onboard the Terra, Aqua and NPP missions. The processing chain fuses CERES observations with data from 19 other unique sources. The addition of CERES Flight Model 5 (FM5) onboard NPP, coupled with ground processing system upgrades further emphasizes the need for an automated job-submission utility to manage multiple processing streams concurrently. The operator-driven, legacy-processing approach relied on manually staging data from magnetic tape to limited spinning disk attached to a shared memory architecture system. The migration of CERES production code to a distributed, cluster computing environment with approximately one petabyte of spinning disk containing all precursor input data products facilitates the development of a CERES-specific, automated workflow manager. In the cluster environment, I/O is the primary system resource in contention across jobs. Therefore, system load can be maximized with a throttling workload manager. This poster discusses a Java and Perl implementation of an automated job management tool tailored for CERES processing.

  12. An Automated System for Garment Texture Design Class Identification

    Directory of Open Access Journals (Sweden)

    Emon Kumar Dey

    2015-09-01

    Full Text Available Automatic identification of garment design class might play an important role in the garments and fashion industry. To achieve this, essential initial works are found in the literature. For example, construction of a garment database, automatic segmentation of garments from real life images, categorizing them into the type of garments such as shirts, jackets, tops, skirts, etc. It is now essential to find a system such that it will be possible to identify the particular design (printed, striped or single color of garment product for an automated system to recommend the garment trends. In this paper, we have focused on this specific issue and thus propose two new descriptors namely Completed CENTRIST (cCENTRIST and Ternary CENTRIST (tCENTRIST. To test these descriptors, we used two different publically available databases. The experimental results of these databases demonstrate that both cCENTRIST and tCENTRIST achieve nearly about 3% more accuracy than the existing state-of-the art methods.

  13. Automated system for laser damage testing of coated optics

    Science.gov (United States)

    Ness, Dale C.; Streater, Alan D.

    2005-12-01

    Research Electro-Optics Inc. (REO) has recently developed a new laser damage testing facility for the purpose of optimizing process parameters for fabrication and coating of high-damage optics. It also enables full or sample qualification of optics with laser damage specifications. The fully automated laser damage testing system uses microscope photography for detection of damage and a 3 ns pulse length 1064 nm laser for irradiation of the sample. It can test and statistically analyze damage events from a large number of shots, enabling large area testing for low probability events. The system measures and maps sizes and locations of damage sites down to a few microns in diameter. The results are not subject to variations due to the human operator. For coatings deposited by ion beam sputtering, small defects (less than 20 microns) are found to be most prevalent at the fluences specified for small optics for the National Ignition Facility. The ability to measure and characterize small defects has improved REO's ability to optimize their processes for making coated optics with high damage thresholds. In addition to qualifying particular parts, the periodic testing also assures that equipment and processes remain optimized.

  14. Automation Challenges of the 80's: What to Do until Your Integrated Library System Arrives.

    Science.gov (United States)

    Allan, Ferne C.; Shields, Joyce M.

    1986-01-01

    A medium-sized aerospace library has developed interim solutions to automation needs by using software and equipment that were available in-house in preparation for an expected integrated library system. Automated processes include authors' file of items authored by employees, journal routing (including routing slips), statistics, journal…

  15. Control and automation of the Pegasus multi-point Thomson scattering system.

    Science.gov (United States)

    Bodner, G M; Bongard, M W; Fonck, R J; Reusch, J A; Rodriguez Sanchez, C; Schlossberg, D J

    2016-11-01

    A new control system for the Pegasus Thomson scattering diagnostic has recently been deployed to automate the laser operation, data collection process, and interface with the system-wide Pegasus control code. Automation has been extended to areas outside of data collection, such as manipulation of beamline cameras and remotely controlled turning mirror actuators to enable intra-shot beam alignment. Additionally, the system has been upgraded with a set of fast (∼1 ms) mechanical shutters to mitigate contamination from background light. Modification and automation of the Thomson system have improved both data quality and diagnostic reliability.

  16. Knowledge based support for real time application of multiagent control and automation in electric power systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Nordstrom, Lars; Lind, Morten

    2011-01-01

    This paper presents a mechanism for developing knowledge based support for real time application of multiagent systems (MAS) in control, automation and diagnosis of electric power systems. In particular it presents a way for autonomous agents to utilize a qualitative means-ends based model...... and choose an appropriate control action. The paper also elaborates on real time interfacing between multi-agent systems and industry standard distribution automation and control system....

  17. Department of Defense (DOD) Automated Biometric Identification System (ABIS) Version 1.2: Initial Operational Test and Evaluation Report

    Science.gov (United States)

    2015-05-01

    Director, Operational Test and Evaluation Department of Defense (DOD) Automated Biometric Identification System (ABIS) Version 1.2 Initial...Operational Test and Evaluation Report May 2015 This report on the Department of Defense (DOD) Automated Biometric Identification System...COVERED - 4. TITLE AND SUBTITLE Department of Defense (DOD) Automated Biometric Identification System (ABIS) Version 1.2 Initial Operational Test

  18. Automated Contingency Management for Advanced Propulsion Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Automated Contingency Management (ACM), or the ability to confidently and autonomously adapt to fault conditions with the goal of still achieving mission objectives,...

  19. Performance of integrated systems of automated roller shade systems and daylight responsive dimming systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon [Department of Architectural Engineering, Sejong University, Kunja-Dong, Kwangjin-Gu, Seoul (Korea, Republic of); Lee, Eleanor S. [Building Technologies Department, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

    2011-03-15

    Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90% of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system. (author)

  20. Performance of Integrated Systems of Automated Roller Shade Systems and Daylight Responsive Dimming Systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon; Lee, Eleanor S.

    2010-07-08

    Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90percent of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system.

  1. Towards a characterization of information automation systems on the flight deck

    Science.gov (United States)

    Dudley, Rachel Feddersen

    This thesis summarizes research to investigate the characteristics that define information automation systems used on aircraft flight decks and the significant impacts that these characteristics have on pilot performance. Major accomplishments of the work include the development of a set of characteristics that describe information automation systems on the flight deck and an experiment designed to study a subset of these characteristics. Information automation systems on the flight deck are responsible for the collection, processing, analysis, and presentation of data to the flightcrew. These systems pose human factors issues and challenges that must be considered by designers of these systems. Based on a previously developed formal definition of information automation for aircraft flight deck systems, an analysis process was developed and conducted to reach a refined set of information automation characteristics. In this work, characteristics are defined as a set of properties or attributes that describe an information automation system's operation or behavior, which can be used to identify and assess potential human factors issues. Hypotheses were formed for a subset of the characteristics: Automation Visibility, Information Quality, and Display Complexity. An experimental investigation was developed to measure performance impacts related to these characteristics, which showed mixed results of expected and surprising findings, with many interactions. A set of recommendations were then developed based on the experimental observations. Ensuring that the right information is presented to pilots at the right time and in the appropriate manner is the job of flight deck system designers. This work provides a foundation for developing recommendations and guidelines specific to information automation on the flight deck with the goal of improving the design and evaluation of information automation systems before they are implemented.

  2. A Retroactive-Burst Framework for Automated Intrusion Response System

    Directory of Open Access Journals (Sweden)

    Alireza Shameli-Sendi

    2013-01-01

    Full Text Available The aim of this paper is to present an adaptive and cost-sensitive model to prevent security intrusions. In most automated intrusion response systems, response selection is performed locally based on current threat without using the knowledge of attacks history. Another challenge is that a group of responses are applied without any feedback mechanism to measure the response effect. We address these problems through retroactive-burst execution of responses and a Response Coordinator (RC mechanism, the main contributions of this work. The retroactive-burst execution consists of several burst executions of responses with, at the end of each burst, a mechanism for measuring the effectiveness of the applied responses by the risk assessment component. The appropriate combination of responses must be considered for each burst execution to mitigate the progress of the attack without necessarily running the next round of responses, because of the impact on legitimate users. In the proposed model, there is a multilevel response mechanism. To indicate which level is appropriate to apply based on the retroactive-burst execution, we get help from a Response Coordinator mechanism. The applied responses can improve the health of Applications, Kernel, Local Services, Network Services, and Physical Status. Based on these indexes, the RC gives a general overview of an attacker’s goal in a distributed environment.

  3. Design of microcontroller based system for automation of streak camera.

    Science.gov (United States)

    Joshi, M J; Upadhyay, J; Deshpande, P P; Sharma, M L; Navathe, C P

    2010-08-01

    A microcontroller based system has been developed for automation of the S-20 optical streak camera, which is used as a diagnostic tool to measure ultrafast light phenomenon. An 8 bit MCS family microcontroller is employed to generate all control signals for the streak camera. All biasing voltages required for various electrodes of the tubes are generated using dc-to-dc converters. A high voltage ramp signal is generated through a step generator unit followed by an integrator circuit and is applied to the camera's deflecting plates. The slope of the ramp can be changed by varying values of the capacitor and inductor. A programmable digital delay generator has been developed for synchronization of ramp signal with the optical signal. An independent hardwired interlock circuit has been developed for machine safety. A LABVIEW based graphical user interface has been developed which enables the user to program the settings of the camera and capture the image. The image is displayed with intensity profiles along horizontal and vertical axes. The streak camera was calibrated using nanosecond and femtosecond lasers.

  4. Design of microcontroller based system for automation of streak camera

    Science.gov (United States)

    Joshi, M. J.; Upadhyay, J.; Deshpande, P. P.; Sharma, M. L.; Navathe, C. P.

    2010-08-01

    A microcontroller based system has been developed for automation of the S-20 optical streak camera, which is used as a diagnostic tool to measure ultrafast light phenomenon. An 8 bit MCS family microcontroller is employed to generate all control signals for the streak camera. All biasing voltages required for various electrodes of the tubes are generated using dc-to-dc converters. A high voltage ramp signal is generated through a step generator unit followed by an integrator circuit and is applied to the camera's deflecting plates. The slope of the ramp can be changed by varying values of the capacitor and inductor. A programmable digital delay generator has been developed for synchronization of ramp signal with the optical signal. An independent hardwired interlock circuit has been developed for machine safety. A LABVIEW based graphical user interface has been developed which enables the user to program the settings of the camera and capture the image. The image is displayed with intensity profiles along horizontal and vertical axes. The streak camera was calibrated using nanosecond and femtosecond lasers.

  5. Security Measures in Automated Assessment System for Programming Courses

    Directory of Open Access Journals (Sweden)

    Jana Šťastná

    2015-12-01

    Full Text Available A desirable characteristic of programming code assessment is to provide the learner the most appropriate information regarding the code functionality as well as a chance to improve. This can be hardly achieved in case the number of learners is high (500 or more. In this paper we address the problem of risky code testing and availability of an assessment platform Arena, dealing with potential security risks when providing an automated assessment for a large set of source code. Looking at students’ programs as if they were potentially malicious inspired us to investigate separated execution environments, used by security experts for secure software analysis. The results also show that availability issues of our assessment platform can be conveniently resolved with task queues. A special attention is paid to Docker, a virtual container ensuring no risky code can affect the assessment system security. The assessment platform Arena enables to regularly, effectively and securely assess students' source code in various programming courses. In addition to that it is a motivating factor and helps students to engage in the educational process.

  6. Nanoparticle-based assays in automated flow systems: A review

    Energy Technology Data Exchange (ETDEWEB)

    Passos, Marieta L.C. [LAQV, REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Rua Jorge Viterbo Ferreira, n° 228, 4050-313 Porto (Portugal); Pinto, Paula C.A.G., E-mail: ppinto@ff.up.pt [LAQV, REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Rua Jorge Viterbo Ferreira, n° 228, 4050-313 Porto (Portugal); Santos, João L.M., E-mail: joaolms@ff.up.pt [LAQV, REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Rua Jorge Viterbo Ferreira, n° 228, 4050-313 Porto (Portugal); Saraiva, M. Lúcia M.F.S., E-mail: lsaraiva@ff.up.pt [LAQV, REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Rua Jorge Viterbo Ferreira, n° 228, 4050-313 Porto (Portugal); Araujo, André R.T.S. [LAQV, REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Rua Jorge Viterbo Ferreira, n° 228, 4050-313 Porto (Portugal); Unidade de Investigação para o Desenvolvimento do Interior, Instituto Politécnico da Guarda, Av. Dr. Francisco de Sá Carneiro, n° 50, 6300-559 Guarda (Portugal)

    2015-08-19

    Nanoparticles (NPs) exhibit a number of distinctive and entrancing properties that explain their ever increasing application in analytical chemistry, mainly as chemosensors, signaling tags, catalysts, analytical signal enhancers, reactive species generators, analyte recognition and scavenging/separation entities. The prospect of associating NPs with automated flow-based analytical is undoubtedly a challenging perspective as it would permit confined, cost-effective and reliable analysis, within a shorter timeframe, while exploiting the features of NPs. This article aims at examining state-of-the-art on continuous flow analysis and microfluidic approaches involving NPs such as noble metals (gold and silver), magnetic materials, carbon, silica or quantum dots. Emphasis is devoted to NP format, main practical achievements and fields of application. In this context, the functionalization of NPs with distinct chemical species and ligands is debated in what concerns the motivations and strengths of developed approaches. The utilization of NPs to improve detector's performance in electrochemical application is out of the scope of this review. The works discussed in this review were published in the period of time comprised between the years 2000 and 2013. - Highlights: • The state of the art of flowing stream systems comprising NPs was reviewed. • The use of different types of nanoparticles in each flow technique is discussed. • The most expressive and profitable applications are summarized. • The main conclusions and future perspectives were compiled in the final section.

  7. An automated system for measuring parameters of nematode sinusoidal movement

    Directory of Open Access Journals (Sweden)

    Stirbl Robert C

    2005-02-01

    Full Text Available Abstract Background Nematode sinusoidal movement has been used as a phenotype in many studies of C. elegans development, behavior and physiology. A thorough understanding of the ways in which genes control these aspects of biology depends, in part, on the accuracy of phenotypic analysis. While worms that move poorly are relatively easy to describe, description of hyperactive movement and movement modulation presents more of a challenge. An enhanced capability to analyze all the complexities of nematode movement will thus help our understanding of how genes control behavior. Results We have developed a user-friendly system to analyze nematode movement in an automated and quantitative manner. In this system nematodes are automatically recognized and a computer-controlled microscope stage ensures that the nematode is kept within the camera field of view while video images from the camera are stored on videotape. In a second step, the images from the videotapes are processed to recognize the worm and to extract its changing position and posture over time. From this information, a variety of movement parameters are calculated. These parameters include the velocity of the worm's centroid, the velocity of the worm along its track, the extent and frequency of body bending, the amplitude and wavelength of the sinusoidal movement, and the propagation of the contraction wave along the body. The length of the worm is also determined and used to normalize the amplitude and wavelength measurements. To demonstrate the utility of this system, we report here a comparison of movement parameters for a small set of mutants affecting the Go/Gq mediated signaling network that controls acetylcholine release at the neuromuscular junction. The system allows comparison of distinct genotypes that affect movement similarly (activation of Gq-alpha versus loss of Go-alpha function, as well as of different mutant alleles at a single locus (null and dominant negative alleles

  8. Sensor concentrator unit for the Continuous Automated Vault Inventory System

    Energy Technology Data Exchange (ETDEWEB)

    Nodine, R.N.; Lenarduzzi, R.

    1997-06-01

    The purpose of this document is to describe the use and operation of the sensor concentrator in the Continuous Automated Vault Inventory System (CAVIS). The CAVIS electronically verifies the presence of items of stored special nuclear material (SNM). US Department of Energy orders require that stored SNM be inventoried periodically to provide assurance that the material is secure. Currently this inventory is a highly manual activity, requiring personnel to enter the storage vaults. Using a CAVIS allows the frequency of physical inventories to be significantly reduced, resulting in substantial cost savings, increased security, and improved safety. The electronic inventory of stored SNM requires two different types of sensors for each item. The two sensors measure different parameters of the item, usually weight and gamma rays. A CAVIS is constructed using four basic system components: sensors, sensor concentrators, a data collection unit, and a database/user interface unit. One sensor concentrator supports the inventory of up to 20 items (40 sensors) and continuously takes readings from the item sensors. On request the sensor concentrator outputs the most recent sensor readings to the data collection unit. The information transfer takes place over a RS485 communications link. The data collection unit supports from 1 to 120 sensor concentrators (1 to 2,400 items) and is referred to as the Sensor Polling and Configuration System (SPCS). The SPCS is connected by a secure Transmission Control Protocol/Internet Protocol (TCP/IP) network to the database/user interface unit, which is referred to as the Graphical Facility Information Center (GraFIC). A CAVIS containing more than 2,400 items is supported by connecting additional SPCS units to the GraFIC.

  9. Design and Development of a Simple Low-cost Touchscreen to Control Home Automation System

    Directory of Open Access Journals (Sweden)

    M. Muntasir Rahman

    2012-10-01

    Full Text Available Human and computer interaction has been developed into a wide and sophisticated field. Earlier automating electrical devices were absolutely mechanical. But with the invention of computer system, many computer researchers have tried to create computer based intelligent systems to accomplish many of their functionalities. Touchscreen controlled home automation system is one of them. These fascinating efforts to create intelligent systems are to provide human being a more convenient life. Moreover, it would accelerate the working speed of users. This paper concentrates primarily on experimental experiences on home automation system with a low-cost touchscreen technology. The proposed system provide an environment in which user can give commands by touching desired position on the touchscreen to automate the control of electrical devices. The interfacing circuit is designed using electronic components available in local market to keep the cost at low level.

  10. An Evaluation of the Automated Cost Estimating Integrated Tools (ACEIT) System

    Science.gov (United States)

    1989-09-01

    C~4p DTIC S ELECTE fl JAN12 19 .1R ~OF S%. B -U AN EVALUATION OF THE AUTOMATED COST ESTIMATING INTEGRATED TOOLS ( ACEIT ) SYSTEM THESIS Caroline L...Ohio go 91 022 AFIT/GCA/LSQ/89S-5 AN EVALUATION OF THE AUTOMATED COST ESTIMATING INTEGRATED TOOLS ( ACEIT ) SYSTEM THESIS Caroline L. Hanson Major, USAF...Department of Defense. AFIT/GCA/LSQ/89S-5 AN EVALUATION OF THE AUTOMATED COST ESTIMATING INTEGRATED TOOLS ( ACEIT ) SYSTEM THESIS Presented to the

  11. Development of a System and Method for Automated Isolation of Stromal Vascular Fraction from Adipose Tissue Lipoaspirate

    Directory of Open Access Journals (Sweden)

    Swathi SundarRaj

    2015-01-01

    Full Text Available Autologous fat grafting for soft tissue reconstruction is challenged by unpredictable long-term graft survival. Fat derived stromal vascular fraction (SVF is gaining popularity in tissue reconstruction as SVF-enriched fat grafts demonstrate improved engraftment. SVF also has potential in regenerative medicine for remodeling of ischemic tissues by promoting angiogenesis. Since SVF cells do not require culture expansion, attempts are being made to develop automated devices to isolate SVF at the point of care. We report development of a closed, automated system to process up to 500 mL lipoaspirate using cell size-dependent filtration technology. The yield of SVF obtained by automated tissue digestion and filtration (1.17 ± 0.5 × 105 cells/gram was equivalent to that obtained by manual isolation (1.15 ± 0.3 × 105; p = 0.8, and the viability of the cells isolated by both methods was greater than 90%. Cell composition included CD34+CD31− adipose stromal cells, CD34+CD31+ endothelial progenitor cells, and CD34−CD31+ endothelial cells, and their relative percentages were equivalent to SVF isolated by the manual method. CFU-F capacity and expression of angiogenic factors were also comparable with the manual method, establishing proof-of-concept for fully automated SVF isolation, suitable for use in reconstructive surgeries and regenerative medicine applications.

  12. The market future of automated price parsing systems for the electric power

    Directory of Open Access Journals (Sweden)

    Elena Zhuravleva

    2013-03-01

    Full Text Available Application of automated control systems allows providing better control on energy resources consumption, improving accountability, optimizing costs of energy resources. There is a need for the automated system which unifies all competing service providers of electric power and creates the monitoring environment of services on the basis of parsing. In such integrated system data collection is carried out in a uniform electronic platform (environment based on the indicator “electric power service price”.

  13. ZigBee Based Industrial Automation Profile for Power Monitoring Systems

    OpenAIRE

    Archana R. Raut,; Dr. L. G. Malik

    2011-01-01

    Industrial automations which are mostly depend upon the power systems & which requires distance controlled and regulated systems. Mostly voltage and current equipped parameters along with power and energy management system forms the industrial scenario for automations. Wireless technology which meets to cost, speed and distance scenario will always be a point of an interest for research. In this research work we mainly monitored power related parameters and enable remote switching devices for...

  14. AN AUTOMATED TESTING NETWORK SYSTEM FOR PAPER LABORATORY BASED ON CAN BUS

    Institute of Scientific and Technical Information of China (English)

    Xianhui Yi; Dongbo Yan; Huanbin Liu; Jigeng Li

    2004-01-01

    This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experiment that the system can collect,analyze and store the test results from the various measuring instruments in the paper lab automatically.The simple, reliable, low-cost measuring automation system will have a prosperous application in the future paper industry.

  15. AN AUTOMATED TESTING NETWORK SYSTEM FOR PAPER LABORATORY BASED ON CAN BUS

    Institute of Scientific and Technical Information of China (English)

    XianhuiYi; DongboYan; HuanbinLi; JigengLi

    2004-01-01

    This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experiment that the system can collect, analyze and store the test results from the various measuring instruments in the paper lab automatically. The simple, reliable, low-cost measuring automation system will have a prosperous application in the future paper industry.

  16. Automated method for the rapid and precise estimation of adherent cell culture characteristics from phase contrast microscopy images.

    Science.gov (United States)

    Jaccard, Nicolas; Griffin, Lewis D; Keser, Ana; Macown, Rhys J; Super, Alexandre; Veraitch, Farlan S; Szita, Nicolas

    2014-03-01

    The quantitative determination of key adherent cell culture characteristics such as confluency, morphology, and cell density is necessary for the evaluation of experimental outcomes and to provide a suitable basis for the establishment of robust cell culture protocols. Automated processing of images acquired using phase contrast microscopy (PCM), an imaging modality widely used for the visual inspection of adherent cell cultures, could enable the non-invasive determination of these characteristics. We present an image-processing approach that accurately detects cellular objects in PCM images through a combination of local contrast thresholding and post hoc correction of halo artifacts. The method was thoroughly validated using a variety of cell lines, microscope models and imaging conditions, demonstrating consistently high segmentation performance in all cases and very short processing times (Source-code for MATLAB and ImageJ is freely available under a permissive open-source license.

  17. An Automated Telephone Nutrition Support System for Spanish-Speaking Patients With Diabetes

    Science.gov (United States)

    Stoddard, Pamela J.; Gonzales, Elizabeth N.; Villagran-Flores, Mariana; Thomson, Joan; Bayard, Paul; Palos Lucio, Ana Gabriela; Schillinger, Dean; Bertozzi, Stefano; Gonzales, Ralph

    2014-01-01

    In the United States, Spanish-speaking patients with diabetes often receive inadequate dietary counseling. Providing language and culture-concordant dietary counseling on an ongoing basis is critical to diabetes self-care. To determine if automated telephone nutrition support (ATNS) counseling could help patients improve glycemic control by duplicating a successful pilot in Mexico in a Spanish-speaking population in Oakland, California. A prospective randomized open-label trial with blinded endpoint assessment (PROBE) was performed. The participants were seventy-five adult patients with diabetes receiving care at a federally qualified health center in Oakland, California. ATNS, a computerized system that dialed patients on their phones, prompted them in Spanish to enter (via keypad) portions consumed in the prior 24 hours of various cultural-specific dietary items, and then provided dietary feedback based on proportion of high versus low glycemic index foods consumed. The control group received the same ATNS phone calls 14 weeks after enrollment. The primary outcome was hemoglobin A1c % (A1c) 12 weeks following enrollment. Participants had no significant improvement in A1c (–0.3% in the control arm, –0.1% in the intervention arm, P = .41 for any difference) or any secondary parameters. In our study, an ATNS system did not improve diabetes control in a Spanish-speaking population in Oakland. PMID:25239122

  18. Robotic and nuclear safety for an automated/teleoperated glove box system

    Energy Technology Data Exchange (ETDEWEB)

    Domning, E.E. (Lawrence Livermore National Lab., CA (United States)); McMahon, T.T.; Sievers, R.H. (Science Applications International Corp., Pleasanton, CA (United States))

    1991-09-01

    Lawrence Livermore National Laboratory (LLNL) is developing a fully automated system to handle the processing of special nuclear materials (SNM). This work is performed in response to the new goals at the Department of Energy (DOE) for hazardous waste minimization and radiation dose reduction. This fully automated system, called the automated test bed (ATB), consists of an IBM gantry robot and automated processing equipment sealed within a glove box. While the ATB is a cold system, we are designing it as a prototype of the future hot system. We recognized that identification and application of safety requirements early in the design phase will lead to timely installation and approval of the hot system. This paper identifies these safety issues as well as the general safety requirements necessary for the safe operation of the ATB. 4 refs., 2 figs.

  19. Building automation system of payment platform weight component for large spacecraft reflector

    Science.gov (United States)

    Kovalev, I. V.; Badanina, J. O.

    2016-04-01

    Considered Design and the logic of opening large convertible antenna. The necessity of compensation weight component in the assembly and testing of the design. Given the logic of the movement elements of power spokes, concluded that the use of the tracking system to compensate for the weight component. The analysis of the existing equipment and control systems. Produced selection of the manufacturer of automated equipment that meets the stated objectives of management and control. It is concluded that the design component of the weight compensation system based on servo controllers and sensors combined platform automation, controlled by special software. The structure of the platform automation, consistent workflow testing. It defines the principles of interaction between subsystems of the weight compensation component for receiving, processing and monitoring of process parameters testing. It is concluded that the proposed system can be integrated into the automation system and the perspective of process control testing of disclosure of large spacecraft.

  20. Potential of Laboratory Execution Systems (LESs) to Simplify the Application of Business Process Management Systems (BPMSs) in Laboratory Automation.

    Science.gov (United States)

    Neubert, Sebastian; Göde, Bernd; Gu, Xiangyu; Stoll, Norbert; Thurow, Kerstin

    2017-04-01

    Modern business process management (BPM) is increasingly interesting for laboratory automation. End-to-end workflow automation and improved top-level systems integration for information technology (IT) and automation systems are especially prominent objectives. With the ISO Standard Business Process Model and Notation (BPMN) 2.X, a system-independent and interdisciplinary accepted graphical process control notation is provided, allowing process analysis, while also being executable. The transfer of BPM solutions to structured laboratory automation places novel demands, for example, concerning the real-time-critical process and systems integration. The article discusses the potential of laboratory execution systems (LESs) for an easier implementation of the business process management system (BPMS) in hierarchical laboratory automation. In particular, complex application scenarios, including long process chains based on, for example, several distributed automation islands and mobile laboratory robots for a material transport, are difficult to handle in BPMSs. The presented approach deals with the displacement of workflow control tasks into life science specialized LESs, the reduction of numerous different interfaces between BPMSs and subsystems, and the simplification of complex process modelings. Thus, the integration effort for complex laboratory workflows can be significantly reduced for strictly structured automation solutions. An example application, consisting of a mixture of manual and automated subprocesses, is demonstrated by the presented BPMS-LES approach.

  1. An Integrated Simulation Module for Cyber-Physical Automation Systems

    Directory of Open Access Journals (Sweden)

    Francesco Ferracuti

    2016-05-01

    Full Text Available The integration of Wireless Sensors Networks (WSNs into Cyber Physical Systems (CPSs is an important research problem to solve in order to increase the performances, safety, reliability and usability of wireless automation systems. Due to the complexity of real CPSs, emulators and simulators are often used to replace the real control devices and physical connections during the development stage. The most widespread simulators are free, open source, expandable, flexible and fully integrated into mathematical modeling tools; however, the connection at a physical level and the direct interaction with the real process via the WSN are only marginally tackled; moreover, the simulated wireless sensor motes are not able to generate the analogue output typically required for control purposes. A new simulation module for the control of a wireless cyber-physical system is proposed in this paper. The module integrates the COntiki OS JAva Simulator (COOJA, a cross-level wireless sensor network simulator, and the LabVIEW system design software from National Instruments. The proposed software module has been called “GILOO” (Graphical Integration of Labview and cOOja. It allows one to develop and to debug control strategies over the WSN both using virtual or real hardware modules, such as the National Instruments Real-Time Module platform, the CompactRio, the Supervisory Control And Data Acquisition (SCADA, etc. To test the proposed solution, we decided to integrate it with one of the most popular simulators, i.e., the Contiki OS, and wireless motes, i.e., the Sky mote. As a further contribution, the Contiki Sky DAC driver and a new “Advanced Sky GUI” have been proposed and tested in the COOJA Simulator in order to provide the possibility to develop control over the WSN. To test the performances of the proposed GILOO software module, several experimental tests have been made, and interesting preliminary results are reported. The GILOO module has been

  2. An Integrated Simulation Module for Cyber-Physical Automation Systems.

    Science.gov (United States)

    Ferracuti, Francesco; Freddi, Alessandro; Monteriù, Andrea; Prist, Mariorosario

    2016-05-05

    The integration of Wireless Sensors Networks (WSNs) into Cyber Physical Systems (CPSs) is an important research problem to solve in order to increase the performances, safety, reliability and usability of wireless automation systems. Due to the complexity of real CPSs, emulators and simulators are often used to replace the real control devices and physical connections during the development stage. The most widespread simulators are free, open source, expandable, flexible and fully integrated into mathematical modeling tools; however, the connection at a physical level and the direct interaction with the real process via the WSN are only marginally tackled; moreover, the simulated wireless sensor motes are not able to generate the analogue output typically required for control purposes. A new simulation module for the control of a wireless cyber-physical system is proposed in this paper. The module integrates the COntiki OS JAva Simulator (COOJA), a cross-level wireless sensor network simulator, and the LabVIEW system design software from National Instruments. The proposed software module has been called "GILOO" (Graphical Integration of Labview and cOOja). It allows one to develop and to debug control strategies over the WSN both using virtual or real hardware modules, such as the National Instruments Real-Time Module platform, the CompactRio, the Supervisory Control And Data Acquisition (SCADA), etc. To test the proposed solution, we decided to integrate it with one of the most popular simulators, i.e., the Contiki OS, and wireless motes, i.e., the Sky mote. As a further contribution, the Contiki Sky DAC driver and a new "Advanced Sky GUI" have been proposed and tested in the COOJA Simulator in order to provide the possibility to develop control over the WSN. To test the performances of the proposed GILOO software module, several experimental tests have been made, and interesting preliminary results are reported. The GILOO module has been applied to a smart home

  3. CULTURAL FEATURES SHARED BY INFORMATION SYSTEMS USERS

    Directory of Open Access Journals (Sweden)

    Marilena Maldonado

    2006-11-01

    Full Text Available Problems may arise when organizational culture is not considered in the development of information systems, such as difficulties in system implementation, since users do not accept changes in their work cultures. However, current methodology designs do not contemplate cultural factors. The objective of this investigation was to identify the main cultural features shared by the users of information systems in an Argentinean university. As result of this work it was possible to identify the memes shared by the members of the community selected, and to categorize such memes according to their incidence grade. This work seeks to be an initial step towards the construction of systems that evolve along with the organizational culture they are an integral part of.

  4. Operations management system advanced automation: Fault detection isolation and recovery prototyping

    Science.gov (United States)

    Hanson, Matt

    1990-01-01

    The purpose of this project is to address the global fault detection, isolation and recovery (FDIR) requirements for Operation's Management System (OMS) automation within the Space Station Freedom program. This shall be accomplished by developing a selected FDIR prototype for the Space Station Freedom distributed processing systems. The prototype shall be based on advanced automation methodologies in addition to traditional software methods to meet the requirements for automation. A secondary objective is to expand the scope of the prototyping to encompass multiple aspects of station-wide fault management (SWFM) as discussed in OMS requirements documentation.

  5. Culture systems: mineral oil overlay.

    Science.gov (United States)

    Morbeck, Dean E; Leonard, Phoebe H

    2012-01-01

    Mineral oil overlay microdrop is commonly used during in vitro fertilization (IVF) procedures. Though mineral oil appears homogeneous, it is an undefined product that can vary in quality. Here, we describe the history, chemistry, processing, and optimal use of mineral oil for IVF and embryo culture.

  6. Model-driven design using IEC 61499 a synchronous approach for embedded and automation systems

    CERN Document Server

    Yoong, Li Hsien; Bhatti, Zeeshan E; Kuo, Matthew M Y

    2015-01-01

    This book describes a novel approach for the design of embedded systems and industrial automation systems, using a unified model-driven approach that is applicable in both domains.  The authors illustrate their methodology, using the IEC 61499 standard as the main vehicle for specification, verification, static timing analysis and automated code synthesis.  The well-known synchronous approach is used as the main vehicle for defining an unambiguous semantics that ensures determinism and deadlock freedom. The proposed approach also ensures very efficient implementations either on small-scale embedded devices or on industry-scale programmable automation controllers (PACs). It can be used for both centralized and distributed implementations. Significantly, the proposed approach can be used without the need for any run-time support. This approach, for the first time, blurs the gap between embedded systems and automation systems and can be applied in wide-ranging applications in automotive, robotics, and industri...

  7. 7 CFR 277.18 - Establishment of an Automated Data Processing (ADP) and Information Retrieval System.

    Science.gov (United States)

    2010-01-01

    ... acquisition including hardware, software, telecommunications, system testing, and data security; (iv) The... need for human assistance or intervention. Automated Data Processing Equipment or hardware means: (1... unauthorized use; (C) Software and data security; (D) Telecommunications security; (E) Personnel security;...

  8. Automated surveillance system for hospital-acquired urinary tract infections in Denmark

    DEFF Research Database (Denmark)

    Condell, Orla; Gubbels, Sophie; Nielsen, J

    2016-01-01

    BACKGROUND: The Danish Hospital-Acquired Infections Database (HAIBA) is an automated surveillance system using hospital administrative, microbiological, and antibiotic medication data. AIM: To define and evaluate the case definition for hospital-acquired urinary tract infection (HA...

  9. Modernization of the automated CARS spectrometer system based on an IBM-compatible PC

    Science.gov (United States)

    Anikeev, Boris V.; Chadaev, D. I.

    2001-05-01

    We describe the updated automated system for coherent anti- Stokes Raman spectroscopy (CARS) that includes a laser spectrometer, automatic data processing and control units, based on an IBM-compatible personal computer.

  10. A system for automated quantification of cutaneous electrogastrograms

    DEFF Research Database (Denmark)

    Paskaranandavadivel, Niranchan; Bull, Simon Henry; Parsell, Doug;

    2015-01-01

    recordings from the gastric mucosa and serosa in a reliable and efficient manner. In particular, the frequency and amplitude of the gastric slow waves were computed, after which signal integrity checks were performed to assess if the signals are valid. For validation, manual estimates of the frequency...... and amplitude were compared to automated estimates. The methods were packaged into a software executable which processes the data and presents the results in an intuitive graphical and a spreadsheet formats. Automated EGG analysis allows for clinical translation of bio-electrical analysis for potential...

  11. The automated system for technological process of spacecraft's waveguide paths soldering

    Science.gov (United States)

    Tynchenko, V. S.; Murygin, A. V.; Emilova, O. A.; Bocharov, A. N.; Laptenok, V. D.

    2016-11-01

    The paper solves the problem of automated process control of space vehicles waveguide paths soldering by means of induction heating. The peculiarities of the induction soldering process are analyzed and necessity of information-control system automation is identified. The developed automated system makes the control of the product heating process, by varying the power supplied to the inductor, on the basis of information about the soldering zone temperature, and stabilizing the temperature in a narrow range above the melting point of the solder but below the melting point of the waveguide. This allows the soldering process automating to improve the quality of the waveguides and eliminate burn-troughs. The article shows a block diagram of a software system consisting of five modules, and describes the main algorithm of its work. Also there is a description of the waveguide paths automated soldering system operation, for explaining the basic functions and limitations of the system. The developed software allows setting of the measurement equipment, setting and changing parameters of the soldering process, as well as view graphs of temperatures recorded by the system. There is shown the results of experimental studies that prove high quality of soldering process control and the system applicability to the tasks of automation.

  12. Some Challenges in the Design of Human-Automation Interaction for Safety-Critical Systems

    Science.gov (United States)

    Feary, Michael S.; Roth, Emilie

    2014-01-01

    Increasing amounts of automation are being introduced to safety-critical domains. While the introduction of automation has led to an overall increase in reliability and improved safety, it has also introduced a class of failure modes, and new challenges in risk assessment for the new systems, particularly in the assessment of rare events resulting from complex inter-related factors. Designing successful human-automation systems is challenging, and the challenges go beyond good interface development (e.g., Roth, Malin, & Schreckenghost 1997; Christoffersen & Woods, 2002). Human-automation design is particularly challenging when the underlying automation technology generates behavior that is difficult for the user to anticipate or understand. These challenges have been recognized in several safety-critical domains, and have resulted in increased efforts to develop training, procedures, regulations and guidance material (CAST, 2008, IAEA, 2001, FAA, 2013, ICAO, 2012). This paper points to the continuing need for new methods to describe and characterize the operational environment within which new automation concepts are being presented. We will describe challenges to the successful development and evaluation of human-automation systems in safety-critical domains, and describe some approaches that could be used to address these challenges. We will draw from experience with the aviation, spaceflight and nuclear power domains.

  13. ARAS: an automated radioactivity aliquoting system for dispensing solutions containing positron-emitting radioisotopes

    OpenAIRE

    2016-01-01

    Background Automated protocols for measuring and dispensing solutions containing radioisotopes are essential not only for providing a safe environment for radiation workers but also to ensure accuracy of dispensed radioactivity and an efficient workflow. For this purpose, we have designed ARAS, an automated radioactivity aliquoting system for dispensing solutions containing positron-emitting radioisotopes with particular focus on fluorine-18 (18F). Methods The key to the system is the combina...

  14. Knowledge Acquisition, Validation, and Maintenance in a Planning System for Automated Image Processing

    Science.gov (United States)

    Chien, Steve A.

    1996-01-01

    A key obstacle hampering fielding of AI planning applications is the considerable expense of developing, verifying, updating, and maintainting the planning knowledge base (KB). Planning systems must be able to compare favorably in terms of software lifecycle costs to other means of automation such as scripts or rule-based expert systems. This paper describes a planning application of automated imaging processing and our overall approach to knowledge acquisition for this application.

  15. Automated Imaging System for Pigmented Skin Lesion Diagnosis

    Directory of Open Access Journals (Sweden)

    Mariam Ahmed Sheha

    2016-10-01

    Full Text Available Through the study of pigmented skin lesions risk factors, the appearance of malignant melanoma turns the anomalous occurrence of these lesions to annoying sign. The difficulty of differentiation between malignant melanoma and melanocytic naive is the error-bone problem that usually faces the physicians in diagnosis. To think through the hard mission of pigmented skin lesions diagnosis different clinical diagnosis algorithms were proposed such as pattern analysis, ABCD rule of dermoscopy, Menzies method, and 7-points checklist. Computerized monitoring of these algorithms improves the diagnosis of melanoma compared to simple naked-eye of physician during examination. Toward the serious step of melanoma early detection, aiming to reduce melanoma mortality rate, several computerized studies and procedures were proposed. Through this research different approaches with a huge number of features were discussed to point out the best approach or methodology could be followed to accurately diagnose the pigmented skin lesion. This paper proposes automated system for diagnosis of melanoma to provide quantitative and objective evaluation of skin lesion as opposed to visual assessment, which is subjective in nature. Two different data sets were utilized to reduce the effect of qualitative interpretation problem upon accurate diagnosis. Set of clinical images that are acquired from a standard camera while the other set is acquired from a special dermoscopic camera and so named dermoscopic images. System contribution appears in new, complete and different approaches presented for the aim of pigmented skin lesion diagnosis. These approaches result from using large conclusive set of features fed to different classifiers. The three main types of different features extracted from the region of interest are geometric, chromatic, and texture features. Three statistical methods were proposed to select the most significant features that will cause a valuable effect in

  16. Automated Generation and Assessment of Autonomous Systems Test Cases

    Science.gov (United States)

    Barltrop, Kevin J.; Friberg, Kenneth H.; Horvath, Gregory A.

    2008-01-01

    This slide presentation reviews some of the issues concerning verification and validation testing of autonomous spacecraft routinely culminates in the exploration of anomalous or faulted mission-like scenarios using the work involved during the Dawn mission's tests as examples. Prioritizing which scenarios to develop usually comes down to focusing on the most vulnerable areas and ensuring the best return on investment of test time. Rules-of-thumb strategies often come into play, such as injecting applicable anomalies prior to, during, and after system state changes; or, creating cases that ensure good safety-net algorithm coverage. Although experience and judgment in test selection can lead to high levels of confidence about the majority of a system's autonomy, it's likely that important test cases are overlooked. One method to fill in potential test coverage gaps is to automatically generate and execute test cases using algorithms that ensure desirable properties about the coverage. For example, generate cases for all possible fault monitors, and across all state change boundaries. Of course, the scope of coverage is determined by the test environment capabilities, where a faster-than-real-time, high-fidelity, software-only simulation would allow the broadest coverage. Even real-time systems that can be replicated and run in parallel, and that have reliable set-up and operations features provide an excellent resource for automated testing. Making detailed predictions for the outcome of such tests can be difficult, and when algorithmic means are employed to produce hundreds or even thousands of cases, generating predicts individually is impractical, and generating predicts with tools requires executable models of the design and environment that themselves require a complete test program. Therefore, evaluating the results of large number of mission scenario tests poses special challenges. A good approach to address this problem is to automatically score the results

  17. Automated roof window control system to address overheating on renovated houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Lyme, Thøger

    2017-01-01

    Highlights •Manually controlled passive cooling system do not assure high quality environment. •Automated window system reduces overheating risk in houses of temperate climates. •Window system offers similar indoor air quality with mechanical ventilation system. •User behavior on window system is...

  18. Dynamic one-way traffic control in automated transportation systems

    NARCIS (Netherlands)

    Ebben, M; van der Zee, DJ

    2004-01-01

    In a project on underground freight transportation using Automated Guided Vehicles, single lanes for traffic in two directions are constructed to reduce infrastructure investment. Intelligent control rules are required to manage vehicle flows such, that collision is avoided and waiting times are min

  19. An automated scanning system for particle physics and medical applications

    Energy Technology Data Exchange (ETDEWEB)

    De Lellis, Giovanni [Dipartimento di Fisica, Universita ' Federico II' di Napoli, Complesso Universitario Monte Sant' Angelo, via Cintia, 80126 Naples (Italy)], E-mail: giovanni.de.lellis@cern.ch

    2007-10-01

    In this paper we present the performance of a fully automated microscope aimed at very precise spatial and angular measurement with the nuclear emulsion technology. We show in particular its application to the study of the fragmentation of carbon ions used in the oncological hadrontherapy.

  20. The design of the automated control system for warehouse equipment under radio-electronic manufacturing

    Science.gov (United States)

    Kapulin, D. V.; Chemidov, I. V.; Kazantsev, M. A.

    2017-01-01

    In the paper, the aspects of design, development and implementation of the automated control system for warehousing under the manufacturing process of the radio-electronic enterprise JSC «Radiosvyaz» are discussed. The architecture of the automated control system for warehousing proposed in the paper consists of a server which is connected to the physically separated information networks: the network with a database server, which stores information about the orders for picking, and the network with the automated storage and retrieval system. This principle allows implementing the requirements for differentiation of access, ensuring the information safety and security requirements. Also, the efficiency of the developed automated solutions in terms of optimizing the warehouse’s logistic characteristics is researched.

  1. Multi-mode Intelligent Storage and Retrieval Systems in Automated Warehoue

    Directory of Open Access Journals (Sweden)

    Li Zhao

    2013-04-01

    Full Text Available In this paper, we study the multi-mode intelligent storage and retrieval systems in automated warehouse. Automated warehouse is the important component of modern Logistics. The storage and retrieval efficiency is an important problem in automated warehouse. Robot technology was used in the design of warehouses aiming to improve the efficiency greatly. The RFID technology is first applied to locate the target roughly and to obtain the attributes of the target. Then the onboard vision is used to recognize and locate the target precisely. Finally, the teaching mode and remote mode are used to assist robot to grasp the target successfully, which can not only reduce the complexity of robot control, but also make full use of the results of image processing. An Intelligent storage and retrieval system in Logistics automated warehouse had been put forward in the paper. A lot of experiments demonstrate the feasibility of the proposed system.

  2. The implementation of the situational control concept of information security in automated training systems

    Directory of Open Access Journals (Sweden)

    A. M. Chernih

    2016-01-01

    Full Text Available The main approaches to ensuring security of information in the automated training systems are considered, need of application of situational management of security of information for the automated training systems is proved, the mathematical model and a problem definition of situational control is offered, the technique of situational control of security of information is developed.The purpose of the study. The aim of the study is to base the application of situational control of information security by subsystem of the control and protection of information in automated learning systems and to develop implementation methods of the situational control concept.Materials and methods. It is assumed that the automated learning system is a fragment of a larger information system that contains several information paths, each of them treats different information in the protection degree from information, containing constituting state secrets, to open access information.It is considered that the technical methods, measures and means of information protection in automated learning systems implement less than half (30% functions of subsystems of control and protection information. The main part of the functions of this subsystem are organizational measures to protect information. It is obvious that the task of ensuring the security of information in automated learning systems associated with the adoption of decisions on rational selection and proper combination of technical methods and institutional arrangements. Conditions of practical application of automated learning systems change over time and transform the situation of such a decision, and this leads to the use of situational control methods.When situational control is implementing, task of the protection of information in automated learning system is solved by the subsystem control and protection of information by distributing the processes ensuring the security of information and resources of

  3. Human-rating Automated and Robotic Systems - (How HAL Can Work Safely with Astronauts)

    Science.gov (United States)

    Baroff, Lynn; Dischinger, Charlie; Fitts, David

    2009-01-01

    Long duration human space missions, as planned in the Vision for Space Exploration, will not be possible without applying unprecedented levels of automation to support the human endeavors. The automated and robotic systems must carry the load of routine housekeeping for the new generation of explorers, as well as assist their exploration science and engineering work with new precision. Fortunately, the state of automated and robotic systems is sophisticated and sturdy enough to do this work - but the systems themselves have never been human-rated as all other NASA physical systems used in human space flight have. Our intent in this paper is to provide perspective on requirements and architecture for the interfaces and interactions between human beings and the astonishing array of automated systems; and the approach we believe necessary to create human-rated systems and implement them in the space program. We will explain our proposed standard structure for automation and robotic systems, and the process by which we will develop and implement that standard as an addition to NASA s Human Rating requirements. Our work here is based on real experience with both human system and robotic system designs; for surface operations as well as for in-flight monitoring and control; and on the necessities we have discovered for human-systems integration in NASA's Constellation program. We hope this will be an invitation to dialog and to consideration of a new issue facing new generations of explorers and their outfitters.

  4. The structure and functions of an automated project management system for the centers of scientific and technical creativity of students

    OpenAIRE

    2013-01-01

    This article discusses the possibility of automating of the student's projecting through the use of automated project management system. There are described the purpose, structure and formalism of automated workplace of student-designer (AWSD), and shown its structural-functional diagram.

  5. Challenges in Gaining Large Scale Carbon Reductions through Wireless Home Automation Systems

    DEFF Research Database (Denmark)

    Larsen, Peter Gorm; Rovsing, Poul Ejnar; Toftegaard, Thomas Skjødeberg

    2010-01-01

    Buildings account for more than a 35 % of the energy consumption in Europe. Therefore a step towards more sustainable lifestile is to use home automation to optimize the energy consumption “automatically”. This paper reports about the usage and some of the remaining challenges of especially...... wireless but also powerline communication in a home automation setting. For many years, home automation has been visible to many, but accessible to only a few, because of inadequate integration of systems. A vast number of both standard and proprietary communication protocols are used, and systems...... are often difficult to install and configure so professional assistance is needed. In this paper we report about our experience in constructing an open universal home automation framework enabling interoperability of multiple communication protocols. The framework can easily be expanded in order to support...

  6. Structure of microprocessor-based automation system of oil pumping station “Alexndrovskaya”

    Directory of Open Access Journals (Sweden)

    Dmitriyenko Margarita A.

    2014-01-01

    Full Text Available Structure of microprocessed-based automation system (MBAS of oil pumping station (OPS «Alexandrovskaya», located on the territory of Tomsk region and forming part of the Oil Transporting Joint Stock Company «Transneft», developed in accordance with the requirements of the guidance document «Complex of the typical design choices automation of OPSs and crude storages on the basis of modern standard solutions and components».

  7. Human Systems Integration and Automation Issues in Small Unmanned Aerial Vehicles

    Science.gov (United States)

    McCauley, Michael E.; Matsangas, Panagiotis

    2004-01-01

    The goal of this report is to identify Human System Integration (HSI) and automation issues that contribute to improved effectiveness and efficiency in the operation of U.S. military Small Unmanned Aerial Vehicles (SUAVs). HSI issues relevant to SUAV operations are reviewed and observations from field trials are summarized. Short-term improvements are suggested research issues are identified and an overview is provided of automation technologies applicable to future SUAV design.

  8. Holistic Evaluation Framework for Automated Bug Triage Systems: Integration of Developer Performance

    Directory of Open Access Journals (Sweden)

    Dr. V. Akila

    2016-04-01

    Full Text Available Bug Triage is an important aspect of Open Source Software Development. Automated Bug Triage system is essential to reduce the cost and effort incurred by manual Bug Triage. At present, the metrics that are available in the literature to evaluate the Automated Bug Triage System are only recommendation centric. These metrics address only the correctness and coverage of the Automated Bug Triage System. Thus, there is a need for user-centric evaluation of the Bug Triage System. The two types of metrics to evaluate the Automated Bug Triage System include Recommendation Metrics and User Metrics. There is a need to corroborate the results produced by the Recommendation Metrics with User Metrics. To this end, this paper furnishes a Holistic Evaluation Framework for Bug Triage System by integrating the developer performance into the evaluation framework. The Automated Bug Triage System is also to retrieve a set of developers for resolving a bug. Hence, this paper proposes Key Performance Indicators (KPI for appraising a developer’s effectiveness in contribution towards the resolution of the bug. By applying the KPIs on the retrieved set of developers, the Bug Triage System can be evaluated quantitatively.

  9. Market introduction of building automation systems: Pt. 2. Functions, emotions anf prestige; Markterschliessung von HausAutomations-Systemen. T. 2. Funktionen, Emotionen und Prestige

    Energy Technology Data Exchange (ETDEWEB)

    Jeck, M.S. [Roland Berger und Partner, International Management Consultants, Muenchen (Germany)

    1997-04-21

    After the introduction of a variety of components for intelligent building automation systems, marketing efforts for whole systems should now be enhanced. The author intends to make 7 statements on this subject, of which Nos. 2 and 3 are presented here. (orig.) [Deutsch] Aus dem intelligenten Haus einen Markt machen - aber wie? Nach einer ausfuehrlichen Betrachtung der Moeglichkeitewn moderner Haus-Automations-Systeme forderte der Autor bereits in der CCI-Serie (CCI 1/97) die Branche auf, sich nach der Markteinfuehrung eines breiten Programmes verschiedenster Haus-Automations-Komponenten nun verstaerkt dem Marketing und dem Vertrieb von Haus-Automations-Loesungen zuzuwenden. Zusammengefasst sind die damit verknuepften Aufgaben und Anforderungen in ``Sieben Thesen``, von denen nachfolgend die Thesen 2 und 3 behandelt werden (orig.)

  10. Expanding Horizons with Chameleon: Team Missouri’s Innovative Home Automation System

    Directory of Open Access Journals (Sweden)

    Bryan Glass

    2010-06-01

    Full Text Available Team Missouri’s 2009 Solar Decathlon entry featured a revolutionary home automation system, Chameleon, promoting both convenience and energy savings. This was accomplished using the typical controls of a convenience based automation system, while maintaining user set points, such as a home’s ambient temperature, in the most energy efficient manner. Environmental features of the system include controls for home heating, ventilation and air conditioning, lighting, windows, shades, appliances, indoor air quality, as well as indoor and outdoor irrigation. Further analysis and refinement to the prototype system displayed at the competition is also presented in this paper.

  11. In vivo robotics: the automation of neuroscience and other intact-system biological fields.

    Science.gov (United States)

    Kodandaramaiah, Suhasa B; Boyden, Edward S; Forest, Craig R

    2013-12-01

    Robotic and automation technologies have played a huge role in in vitro biological science, having proved critical for scientific endeavors such as genome sequencing and high-throughput screening. Robotic and automation strategies are beginning to play a greater role in in vivo and in situ sciences, especially when it comes to the difficult in vivo experiments required for understanding the neural mechanisms of behavior and disease. In this perspective, we discuss the prospects for robotics and automation to influence neuroscientific and intact-system biology fields. We discuss how robotic innovations might be created to open up new frontiers in basic and applied neuroscience and present a concrete example with our recent automation of in vivo whole-cell patch clamp electrophysiology of neurons in the living mouse brain.

  12. ACSES: The Automated Computer Science Education System at the University of Illinois.

    Science.gov (United States)

    Nievergelt, J.; And Others

    The Automated Computer Science Educational System (ACSES) has been developed at the University of Illinois for the purpose of providing improved education for the large number of students taking introductory computer science courses. The major components of this system are: a library of instructional lessons, an interactive programing system with…

  13. Conceptual model of an automated information system of marketing at the enterprise

    Directory of Open Access Journals (Sweden)

    D.V. Raiko

    2014-09-01

    Full Text Available The aim of the article. The purpose of this paper is to create a conceptual model of an automated information system of marketing that has a certain theoretical and practical value. The results of the analysis. The main advantage of this model - a comprehensive disclosure of the relationship of concepts such as automated information technology, marketing information system, automated information system that solve the problem of processing large volumes of data in a short period of time, providing continuous communication with partners and customers and makes it possible to react quickly to market changes, and this in turn contributes to the competitiveness of the domestic and foreign markets. Scientific novelty of this model is, firstly, the assertion that the information system is based on automated information technology presents an automated information the system. Secondly, the marketing information system is an integral part of information system, structural elements are responsible for the transformation of data from internal and external sources of information to information necessary for managers and specialists of marketing services. Thirdly, the most important component of ensuring the functioning of the marketing information system and information system is an automated information technology. Due to the fact that these systems consist of human resources, work within them organized with the help of workstations. Conclusions and directions of further researches. Determined that this conceptual model provides a multi-variant calculations of rational decision-making, including real-time organization of complex accounting and economic analysis, and provides reliability and efficiency obtained and used in the management of information. The results of this model, testing the example of several industries, confirming its practical significance.

  14. Surveillance cultures of samples obtained from biopsy channels and automated endoscope reprocessors after high-level disinfection of gastrointestinal endoscopes

    Directory of Open Access Journals (Sweden)

    Chiu King-Wah

    2012-09-01

    Full Text Available Abstract Background The instrument channels of gastrointestinal (GI endoscopes may be heavily contaminated with bacteria even after high-level disinfection (HLD. The British Society of Gastroenterology guidelines emphasize the benefits of manually brushing endoscope channels and using automated endoscope reprocessors (AERs for disinfecting endoscopes. In this study, we aimed to assess the effectiveness of decontamination using reprocessors after HLD by comparing the cultured samples obtained from biopsy channels (BCs of GI endoscopes and the internal surfaces of AERs. Methods We conducted a 5-year prospective study. Every month random consecutive sampling was carried out after a complete reprocessing cycle; 420 rinse and swabs samples were collected from BCs and internal surface of AERs, respectively. Of the 420 rinse samples collected from the BC of the GI endoscopes, 300 were obtained from the BCs of gastroscopes and 120 from BCs of colonoscopes. Samples were collected by flushing the BCs with sterile distilled water, and swabbing the residual water from the AERs after reprocessing. These samples were cultured to detect the presence of aerobic and anaerobic bacteria and mycobacteria. Results The number of culture-positive samples obtained from BCs (13.6%, 57/420 was significantly higher than that obtained from AERs (1.7%, 7/420. In addition, the number of culture-positive samples obtained from the BCs of gastroscopes (10.7%, 32/300 and colonoscopes (20.8%, 25/120 were significantly higher than that obtained from AER reprocess to gastroscopes (2.0%, 6/300 and AER reprocess to colonoscopes (0.8%, 1/120. Conclusions Culturing rinse samples obtained from BCs provides a better indication of the effectiveness of the decontamination of GI endoscopes after HLD than culturing the swab samples obtained from the inner surfaces of AERs as the swab samples only indicate whether the AERs are free from microbial contamination or not.

  15. Managing organizational culture within a management system

    Energy Technology Data Exchange (ETDEWEB)

    Comeau, L.; Watts, G. [New Brunswick Power Nuclear, Point Lepreau Generating Station, New Brunswick (Canada)

    2009-07-01

    The Point Lepreau Generating Station (PLGS) is currently undergoing a major refurbishment of its nuclear reactor. At the same time, a small team is designing the organization that will operate the plant after refurbishment. This paper offers a high level overview of the Post-Refurbishment Organization (PRO) project and will focus primarily on the approach used to address organizational culture and human system dynamics. We will describe how various tools, used to assess organization culture, team performance, and individual self-understanding, are used collectively to place the right person in the right position. We will explain how the career system, Pathfinder, is used to integrate these tools to support a comprehensive model for organization design and development. Finally, we demonstrate how the management of organizational cultural and human system dynamics are integrated into the PLGS Integrated Management System. (author)

  16. [Bacteria ecology in planting-culturing system].

    Science.gov (United States)

    Huang, Fenglian; Xia, Beicheng; Dai, Xin; Chen, Guizhu

    2004-06-01

    Planting-culturing system in inter-tidal zone is a new type eco-culturing model. The survey on bacteria biomass and water quality in the designed planting-culturing system in inter-tidal zone showed that the mangrove planted in the system improved water quality and made water quality to II-III type, better than the IV and V type in the control pond. Designed ponds made heterotrophic bacteria, vibrio, phosphorus bacteria and enzyme-producing bacteria populations 1-2 order lower than the control pond without mongrove planting. Correlation analyses with CORREL software showed that the biomass of these bacteria was positively related with the nitrogen and phosphorus contents in water of the system, and the correlation coefficient for heterogeneous bacteria and vibrio was up to 0.9205. Heterotrophic bacteria and vibrio could be used as the water-quality monitoring organisms.

  17. Dialysate purification after introduction of automated hot water disinfection system to central dialysis fluid delivery system.

    Science.gov (United States)

    Ogawa, Tomonari; Matsuda, Akihiko; Yamaguchi, Yumiko; Sasaki, Yusuke; Kanayama, Yuki; Maeda, Tadaaki; Noiri, Chie; Hasegawa, Hajime; Matsumura, Osamu; Mitarai, Tetsuya

    2012-01-01

    Most dialysis clinics in Japan have mainly adopted the central dialysis fluid delivery system (CDDS) to provide constant treatment to many patients. Chemical disinfection is the major maintenance method of the CDDS. Our clinic introduced an automated hot water disinfection system that used the heat conduction effect to disinfect a reverse osmosis (RO) device and dialysis fluid supply equipment. Endotoxin level and the amount of viable bacteria often showed abnormal values before introduction of this system. After its introduction, weekly disinfection resulted in endotoxin levels and the amount of viable bacteria lower than measurement sensitivity. In hot water disinfection, water heated to 90°C in the RO tank flows into the dialysis fluid supply equipment. The maximum temperature inside the tank of the supply equipment is 86.3°C. (We confirmed that the temperature was maintained at 80°C or more for 10 minutes or more during the monitoring.) Dialysate purification was maintained even after introduction of the automated hot water disinfection system and the dialysate could be supplied stably by the CDDS. Therefore, this disinfection system might be very useful in terms of both cost and safety, and can be used for dialysis treatment of multiple patients.

  18. Intelligent Transportation Systems: Automated Guided Vehicle Systems in Changing Logistics Environments

    Science.gov (United States)

    Schulze, L.; Behling, S.; Buhrs, S.

    2008-06-01

    The usage of Automated Guided Vehicle Systems (AGVS) is growing. This has not always been the case in the past. A new record of the sells numbers is the result of inventive developments, new applications and modern thinking. One market that AGVS were not able to thoroughly conquer yet were rapidly changing logistics environments. The advantages in recurrent transportation with AGVS used to be hindered by the needs of flexibility. When nowadays managers talk about Flexible Manufacturing Systems (FMS) there is no reason not to consider AGVS. Fixed guidelines, permanent transfer stations and static routes are no necessity for most AGVS producers. Flexible Manufacturing Systems can raise profitability with AGVS. When robots start saving billions in production costs, the next step at same plants are automated materials handling systems. Today, there are hundreds of instances of computer-controlled systems designed to handle and transport materials, many of which have replaced conventional human-driven platform trucks. Reduced costs due to damages and failures, tracking and tracing as well as improved production scheduling on top of fewer personnel needs are only some of the advantages.

  19. Automated detection of micro-organisms in blood cultures by means of the Malthus Microbiological Growth Analyser.

    Science.gov (United States)

    Brown, D F; Warner, M; Taylor, C E; Warren, R E

    1984-01-01

    A prototype Malthus Microbiological Growth Analyser was compared with conventional methods for examining blood cultures in a trial of 651 cultures mostly from patients with haematological malignancy or undergoing haemodialysis or renal transplantation. Of 100 significantly positive cultures, organisms from 82 grew in the conventional aerobic (+ CO2) bottle, 78 in the conventional anaerobic bottle and 71 in the Malthus bottle. The differences were not statistically significant (p greater than 0.05). The Malthus system detected 83.6% of significantly positive cultures earlier than the comparable conventional bottles while 7.3% positive cultures were detected earlier by the conventional system. When use of the Malthus system was restricted to the hours of 09.00 to 17.30 daily 27.3% positive cultures were detected earlier by the Malthus system and 16.4% were detected earlier by the conventional system. One of the organisms which grew in the Malthus bottle, a contaminating Staphylococcus epidermidis, was not detected by the Malthus system. Instability of electrodes resulted in 26.9% false positive cultures with the prototype Malthus system. Contamination rates in both the Malthus and conventional anaerobic bottles were lower than in the aerobic bottles.

  20. FPGA-Based Real-Time Motion Detection for Automated Video Surveillance Systems

    Directory of Open Access Journals (Sweden)

    Sanjay Singh

    2016-03-01

    Full Text Available Design of automated video surveillance systems is one of the exigent missions in computer vision community because of their ability to automatically select frames of interest in incoming video streams based on motion detection. This research paper focuses on the real-time hardware implementation of a motion detection algorithm for such vision based automated surveillance systems. A dedicated VLSI architecture has been proposed and designed for clustering-based motion detection scheme. The working prototype of a complete standalone automated video surveillance system, including input camera interface, designed motion detection VLSI architecture, and output display interface, with real-time relevant motion detection capabilities, has been implemented on Xilinx ML510 (Virtex-5 FX130T FPGA platform. The prototyped system robustly detects the relevant motion in real-time in live PAL (720 × 576 resolution video streams directly coming from the camera.

  1. Automated Immobilized Metal Affinity Chromatography System for Enrichment of Escherichia coli Phosphoproteome

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Yi; Wu, Si; Zhao, Rui; Zink, Erika M.; Orton, Daniel J.; Moore, Ronald J.; Meng, Da; Clauss, Therese RW; Aldrich, Joshua T.; Lipton, Mary S.; Pasa-Tolic, Ljiljana

    2013-06-05

    Enrichment of bacterial phosphopeptides is an essential step prior to bottom-up mass spectrometry-based analysis of the phosphoproteome, which is fundamental to understanding the role of phosphoproteins in cell signaling and regulation of protein activity. We developed an automated IMAC system to enrich strong cation exchange-fractionated phosphopeptides from the soluble proteome of Escherichia coli MG1655 grown on minimal medium. Initial demonstration of the system resulted in identification of 75 phosphopeptides covering 52 phosphoproteins. Consistent with previous studies, many of these phosphoproteins are involved in the carbohydrate portion of central metabolism. The automated system utilizes a large capacity IMAC column that can effectively enrich phosphopeptides from a bacterial sample by increasing peptide loading and reducing the wash time. An additional benefit of the automated IMAC system is reduced labor and associated costs.

  2. Automating the aviation command safety assessment survey as an Enterprise Information System (EIS)

    OpenAIRE

    Held, Jonathan S.; Mingo, Fred J.

    1999-01-01

    The Aviation Command Safety Assessment (ACSA) is a questionnaire survey methodology developed to evaluate a Naval Aviation Command's safety climate, culture, and safety program effectiveness. This survey was a manual process first administered in the fall of 1996. The primary goal of this thesis is to design, develop, and test an Internet-based, prototype model for administering this survey using new technologies that allow automated survey submission and analysis. The result of this thesis i...

  3. The performance of fully automated urine analysis results for predicting the need of urine culture test

    Directory of Open Access Journals (Sweden)

    Hatice Yüksel

    2014-06-01

    Full Text Available Objectives: Urinalysis and urine culture are most common tests for diagnosis of urinary tract infections. The aim of our study is to examine the diagnostic performance of urine analysis and the role of urine analysis to determine the requirements for urine culture. Methods: Urine culture and urine analysis results of 362 patients were retrospectively analyzed. Culture results were taken as a reference for chemical and microscopic examination of urine and diagnostic accuracy of the test parameters, that may be a marker for urinary tract infection, and the performance of urine analysis were calculated for predicting the urine culture requirements. Results: A total of 362 urine culture results of patients were evaluated and 67% of them were negative. The results of leukocyte esterase and nitrite in chemical analysis and leukocytes and bacteria in microscopic analysis were normal in 50.4% of culture negative urines. In diagnostic accuracy calculations, leukocyte esterase (86.1% and microscopy leukocytes (88.0% were found with high sensitivity, nitrite (95.4% and bacteria (86.6% were found with high specificity. The area under the curve was calculated as 0.852 in ROC analysis for microscopic examination for leukocytes. Conclusion: Full-automatic urine devices can provide sufficient diagnostic accuracy for urine analysis. The evaluation of urine analysis results in an effective way can predict the necessity for urine culture requests and especially may contribute to a reduction in the work load and cost. J Clin Exp Invest 2014; 5 (2: 286-289

  4. 4D Trajectory Estimation for Air Traffic Control Automation System Based on Hybrid System Theory

    Directory of Open Access Journals (Sweden)

    Xin-Min Tang

    2012-03-01

    Full Text Available To resolve the problem of future airspace management under great traffic flow and high density condition, 4D trajectory estimation has become one of the core technologies of the next new generation air traffic control automation system. According to the flight profile and the dynamics models of different aircraft types under different flight conditions, a hybrid system model that switches the aircraft from one flight stage to another with aircraft state changing continuously in one state is constructed. Additionally, air temperature and wind speed are used to modify aircraft true airspeed as well as ground speed, and the hybrid system evolution simulation is used to estimate aircraft 4D trajectory. The case study proves that 4D trajectory estimated through hybrid system model can image the flight dynamic states of aircraft and satisfy the needs of the planned flight altitude profile.KEY WORDSair traffic management, 4D trajectory estimation, hybrid system model, aircraft dynamic model

  5. Energy-Saving Automation and LED Lighting Systems in Industry, Transport, Building and Municipal Sector

    Directory of Open Access Journals (Sweden)

    V.P. Klimenko

    2013-09-01

    Full Text Available Protocol of diverse technological data unification providing the ability to scale with a minimal increase in auxiliary information volume that allows its usage, ranging from the simplest microcontrollers to integration of automation equipment in global systems was designed for industrial automation systems. Basic technical solutions implemented in development of LED lighting systems of salon subway cars, including a schematic diagram of the lamp, the main technical characteristics of the lamp power supply, the peculiarities of developed design of LED modules are described.

  6. An Automated Silicon Module Assembly System for the CMS Silicon Tracker

    CERN Document Server

    Honma, Alan; Labbé, Jean-Claude; Lenzi, Michela; Mannelli, Marcello; Oh, Alexander; Spagnolo, Paolo; Surrow, Bernd

    2002-01-01

    The CMS Tracker requires the assembly of about 20000 silicon detector modules. To ensure the assembly of such a large quantity with high, reproducible quality, an automated system for module assembly has been developed based on a high-precision robotic positioning machine. This system allows a much higher throughput and will result in much reduced manpower requirements than for traditional manual techniques. This note describes the design and performance of the automated Silicon module assembly system which has been developed within the CERN CMS Silicon Tracker group.

  7. Relay Protection and Automation Systems Based on Programmable Logic Integrated Circuits

    Energy Technology Data Exchange (ETDEWEB)

    Lashin, A. V., E-mail: LashinAV@lhp.ru; Kozyrev, A. V. [JSC “Lenhydroproject” (Russian Federation)

    2015-09-15

    One of the most promising forms of developing the apparatus part of relay protection and automation devices is considered. The advantages of choosing programmable logic integrated circuits to obtain adaptive technological algorithms in power system protection and control systems are pointed out. The technical difficulties in the problems which today stand in the way of using relay protection and automation systems are indicated and a new technology for solving these problems is presented. Particular attention is devoted to the possibility of reconfiguring the logic of these devices, using programmable logic integrated circuits.

  8. Design of a robotic automation system for transportation of goods in hospitals

    DEFF Research Database (Denmark)

    Özkil, Ali Gürcan; Fan, Zhun; Sørensen, Torben

    2007-01-01

    Hospitals face with heavy traffic of goods everyday, where transportation tasks are mainly carried by human. Analysis of the current situation of transportation in a typical hospital showed several transportation tasks are suitable for automation. This paper presents a system, consisting of a fleet...... of robot vehicles, automatic stations and smart containers for automation of transportation of goods in hospitals. Design of semi-autonomous robot vehicles, containers and stations are presented and the overall system architecture is described. Implementing such a system in an existing hospital showed...

  9. Intelligent Case Based Decision Support System for Online Diagnosis of Automated Production System

    Science.gov (United States)

    Ben Rabah, N.; Saddem, R.; Ben Hmida, F.; Carre-Menetrier, V.; Tagina, M.

    2017-01-01

    Diagnosis of Automated Production System (APS) is a decision-making process designed to detect, locate and identify a particular failure caused by the control law. In the literature, there are three major types of reasoning for industrial diagnosis: the first is model-based, the second is rule-based and the third is case-based. The common and major limitation of the first and the second reasonings is that they do not have automated learning ability. This paper presents an interactive and effective Case Based Decision Support System for online Diagnosis (CB-DSSD) of an APS. It offers a synergy between the Case Based Reasoning (CBR) and the Decision Support System (DSS) in order to support and assist Human Operator of Supervision (HOS) in his/her decision process. Indeed, the experimental evaluation performed on an Interactive Training System for PLC (ITS PLC) that allows the control of a Programmable Logic Controller (PLC), simulating sensors or/and actuators failures and validating the control algorithm through a real time interactive experience, showed the efficiency of our approach.

  10. Field Application of Automated Power Arc Spraying System on Steel Bridge Deck

    Institute of Scientific and Technical Information of China (English)

    YI Chun-long; SUO Shuang-fu; SUN Zhi; PANG Xu-nan

    2004-01-01

    The effective corrosion protection coating and high productive coating equipment for steel bridge deck has been a challenge for bridge engineers for many years. An automated power arc spraying system was first designed and field applied to coating the deck of Wuhan Junshan Yangtze River Bridge in high efficiency. This steel bridge is a continuous orthotropic deck box girder cable-stayed bridge with 962 m in length and 38.8 m in width, whose width is the No. 1 in China. The whole orthotropic deck with over 35,000 m2surface area was arc-sprayed a protective coating of zinc on site, followed by a sealant and SMA paving material. The side face and bottom of box girders were arc-sprayed with aluminum in factory.Field application indicated that the newly designed automated power arc spraying system with fan nozzle and separate primary & secondary atomizing air had some advantages over the conventional arc spraying system, such as automated operation,big arc spray current, high spraying rate, big breadth of each coat, even and small atomized particles, high density and low porosity of sprayed coating, and high adhesive strength to the substrate.Working procedure of surface preparation and automated arc spraying on bridge deck were introduced, and the quality of sprayed coating is controlled strictly. Field tests proved that the application of this automated power arc spraying system is successful and suitable for coating the steel bridge deck.

  11. The Model and Control Methods of Access to Information and Technology Resources of Automated Control Systems in Water Supply Industry

    Science.gov (United States)

    Rytov, M. Yu; Spichyack, S. A.; Fedorov, V. P.; Petreshin, D. I.

    2017-01-01

    The paper describes a formalized control model of access to information and technological resources of automated control systems at water supply enterprises. The given model considers the availability of various communication links with information systems and technological equipment. There are also studied control methods of access to information and technological resources of automated control systems at water supply enterprises. On the basis of the formalized control model and appropriate methods there was developed a software-hardware complex for rapid access to information and technological resources of automated control systems, which contains an administrator’s automated workplace and ultimate users.

  12. Domotics – A Cost Effective Smart Home Automation System Using Wifi as Network Infrastructure

    Directory of Open Access Journals (Sweden)

    Abhinav Talgeri

    2014-08-01

    Full Text Available This paper describes an investigation into the potential for remote controlled operation of home automation (also called as Domotics systems. It considers problems with their implementation, discusses possible solutions through various network technologies and indicates how to optimize the use of such systems. This paper emphasizes on the design and prototype implementation of new home automation system that uses WiFi technology as a network infrastructure connecting its parts. The proposed can be viewed on two fold; the first part is the software (web server, which presents system core that manages, controls, and monitors users’ home. Users and system administrator can locally (LAN or remotely (internet manage the system code. Second part is hardware interface module, which provides appropriate interface to sensors and actuator of home automation system. Unlike most of available home automation system in the market the proposed system is scalable that one server can manage many hardware interface modules as long as it exists on WiFi network coverage.

  13. ON THE EFFECT OF ADAPTIVE USER INTERFACES ON RELIABILITY AND EFFICIENCY OF THE AUTOMATED SYSTEMS

    Directory of Open Access Journals (Sweden)

    Yu. O. Furtat

    2014-01-01

    Full Text Available In modern automated systems users often have to face the information overload problem because of ever increasing volumes of information with short time processing requirements. Working in such conditions affects the system operator’s work quality and the systems reliability. One possible approach to solving the information overload problem is to create personalized interfaces that take into account the user’s information management particularities. System operator’s features, which determine the shape and pace of information representation preferred by him, form the user’s cognitive portrait. To determine the values of portrait characteristics professional testing with the assistance of psychologists or operational testing at the user’s workplace is performed. The second option is more preferable for use in automated systems, since it has no issue with lack of psychologists. Cognitive portrait is then built as a result of user interaction with the software diagnostic tools that are based on the cognitive psychology methods. The effect of personalized user interface application in an automated system can be estimated by quantifying how the reduction in user’s response time to critical events affects the system reliability and efficiency. For this purpose, the formulae of reliability theory for complex automated systems are used, showing the dependence between the system reliability and user’s response time to critical event.

  14. Policy-based secure communication with automatic key management for industrial control and automation systems

    Science.gov (United States)

    Chernoguzov, Alexander; Markham, Thomas R.; Haridas, Harshal S.

    2016-11-22

    A method includes generating at least one access vector associated with a specified device in an industrial process control and automation system. The specified device has one of multiple device roles. The at least one access vector is generated based on one or more communication policies defining communications between one or more pairs of devices roles in the industrial process control and automation system, where each pair of device roles includes the device role of the specified device. The method also includes providing the at least one access vector to at least one of the specified device and one or more other devices in the industrial process control and automation system in order to control communications to or from the specified device.

  15. Performance Evaluation of a Software Engineering Tool for Automated Design of Cooling Systems in Injection Moulding

    DEFF Research Database (Denmark)

    Jauregui-Becker, Juan M.; Tosello, Guido; van Houten, Fred J.A.M.;

    2013-01-01

    This paper presents a software tool for automating the design of cooling systems for injection moulding and a validation of its performance. Cooling system designs were automatically generated by the proposed software tool and by applying a best practice tool engineering design approach. The two ...

  16. Technology transfer potential of an automated water monitoring system. [market research

    Science.gov (United States)

    Jamieson, W. M.; Hillman, M. E. D.; Eischen, M. A.; Stilwell, J. M.

    1976-01-01

    The nature and characteristics of the potential economic need (markets) for a highly integrated water quality monitoring system were investigated. The technological, institutional and marketing factors that would influence the transfer and adoption of an automated system were studied for application to public and private water supply, public and private wastewater treatment and environmental monitoring of rivers and lakes.

  17. Development of an automated system for isolation and purification of humic substances

    NARCIS (Netherlands)

    Zomeren, van A.; Weij-Zuiver, van der E.; Comans, R.N.J.

    2008-01-01

    Characterization of humic substances (HS) in environmental samples generally involves labor-intensive and time-consuming isolation and purification procedures. In this paper, the development of an automated system for HS isolation and purification is described. The novelty of the developed system li

  18. 78 FR 67927 - Foreign Trade Regulations (FTR): Mandatory Automated Export System Filing for All Shipments...

    Science.gov (United States)

    2013-11-13

    ... Export System Filing for All Shipments Requiring Shipper's Export Declaration Information: Substantive... the Automated Export System (AES) under control number 0607-0152. DATES: The effective date of the... instrument used for collecting export trade data, which is used by the Census Bureau for statistical...

  19. Managing Selection for Electronic Resources: Kent State University Develops a New System to Automate Selection

    Science.gov (United States)

    Downey, Kay

    2012-01-01

    Kent State University has developed a centralized system that manages the communication and work related to the review and selection of commercially available electronic resources. It is an automated system that tracks the review process, provides selectors with price and trial information, and compiles reviewers' feedback about the resource. It…

  20. An automated ECG system in a large hospital: coding, storage and retrieval of tracings

    NARCIS (Netherlands)

    Meijler, F.L.; Robles de Medina, E.O.; Helder, J.C.

    1975-01-01

    This paper describes an automated ECG-system as it is used in the 1000-bed University Hospital Utrecht, The Netherlands. The system involves a "hybride" approach, combining computer analysis of the ECG by means of the Pipberger program with the reading by a cardiologist via a specially developed cod

  1. Validation of an automated system for measuring anxiety-related behaviours in the elevated plus maze.

    Science.gov (United States)

    Sidor, Michelle M; Rilett, Kelly; Foster, Jane A

    2010-04-30

    The elevated plus maze (EPM) is one of the most widely used and established tests to assess anxiety-related behaviours and has been validated for use in both mice and rats. Although relatively quick and simple to conduct, there always exists the potential for observer bias during data collection. The KinderScientific EPM system uses a series of apparatus-embedded photobeams to collect spatiotemporal measures such as the amount of time spent in each zone of the maze (centre, open and closed arms), and the frequency of arm entries. Risk assessment behaviours, such as head dips and protected stretches, are also measured which represents a unique feature of this system over other automated EPM systems. We compared observer derived spatiotemporal and risk assessment measurements with automated generated data to test the reliability and accuracy of the automated system. Data were manually collected using different zone entry/exit criteria (2 vs. 4 paws). Automated data were generated using both the default zone map provided with the system and a user-modified zone map. We show that the automated EPM provides accurate and reliable measurements of both spatiotemporal and risk assessment behaviours. In addition, we show that the default zone map overestimated visually observed arm entries while our modified zone map generated data comparable to manually generated data using a 4 paws open arm entry criteria which is most consistently used to define arm entry in the literature. The KinderScientific automated EPM system represents a reliable tool for collection of a wide range of anxiety-related behavioural measures.

  2. Automation or De-automation

    Science.gov (United States)

    Gorlach, Igor; Wessel, Oliver

    2008-09-01

    In the global automotive industry, for decades, vehicle manufacturers have continually increased the level of automation of production systems in order to be competitive. However, there is a new trend to decrease the level of automation, especially in final car assembly, for reasons of economy and flexibility. In this research, the final car assembly lines at three production sites of Volkswagen are analysed in order to determine the best level of automation for each, in terms of manufacturing costs, productivity, quality and flexibility. The case study is based on the methodology proposed by the Fraunhofer Institute. The results of the analysis indicate that fully automated assembly systems are not necessarily the best option in terms of cost, productivity and quality combined, which is attributed to high complexity of final car assembly systems; some de-automation is therefore recommended. On the other hand, the analysis shows that low automation can result in poor product quality due to reasons related to plant location, such as inadequate workers' skills, motivation, etc. Hence, the automation strategy should be formulated on the basis of analysis of all relevant aspects of the manufacturing process, such as costs, quality, productivity and flexibility in relation to the local context. A more balanced combination of automated and manual assembly operations provides better utilisation of equipment, reduces production costs and improves throughput.

  3. Automated Menu Recommendation System Based on Past Preferences

    Directory of Open Access Journals (Sweden)

    Daniel Simon Sanz

    2014-08-01

    Full Text Available Data mining plays an important role in ecommerce in today’s world. Time is critical when it comes to shopping as options are unlimited and making a choice can be tedious. This study presents an application of data mining in the form of an Android application that can provide user with automated suggestion based on past preferences. The application helps a person to choose what food they might want to order in a specific restaurant. The application learns user behavior with each order - what they order in each kind of meal and what are the products that they select together. After gathering enough information, the application can suggest the user about the most selected dish in the recent past and since the application started to learn. Applications, such as these, can play a major role in helping make a decision based on past preferences, thereby reducing the user involvement in decision making.

  4. THE METHOD OF FORMING THE PIGGYBACK TECHNOLOGIES USING THE AUTOMATED HEURISTIC SYSTEM

    Directory of Open Access Journals (Sweden)

    Ye. Nahornyi

    2015-07-01

    Full Text Available In order to choose a rational piggyback technology there was offered a method that envisages the automated system improvement by giving it a heuristic nature. The automated system is based on a set of methods, techniques and strategies aimed at creating optimal resource saving technologies, which makes it possible to take into account with maximum efficiency the interests of all the participants of the delivery process. When organizing the piggyback traffic there is presupposed the coordination of operations between the piggyback traffic participants to minimize the cargo travel time.

  5. Risk Assessment on the Transition Program for Air Traffic Control Automation System Upgrade

    Directory of Open Access Journals (Sweden)

    Li Dong Bin

    2016-01-01

    Full Text Available We analyzed the safety risks of the transition program for Air Traffic Control (ATC automation system upgrade by using the event tree analysis method in this paper. We decomposed the occurrence progress of the three transition phase and built the event trees corresponding to the three stages, and then we determined the probability of success of each factor and calculated probability of success of the air traffic control automation system upgrade transition. In the conclusion, we illustrate the transition program safety risk according to the results.

  6. Automated Space Surveillance using the AN/FSY-3 Space Fence System

    Science.gov (United States)

    Hack, P.; Carbaugh, K.; Simon, K.

    2016-09-01

    The AN/FSY-3 Space Fence System is a highly automated space surveillance system enabled by a service-oriented, net-centric architecture and an advanced situational awareness user interface. The large radar power aperture, coupled with mission processing, automation and advanced visualization, permits rapid space catalog buildup and provides space object event alerts to operators in near-real time. Operator burden is minimized with intuitive three-dimensional track displays, simplified radar tasking and control, and orbital mechanics processing driven by the US Air Force Space Command (AFSPC) Astrodynamic Standards Software.

  7. AUTOMATED GUIDED VEHICLE (AGV SYSTEMS AND ROUTING PROBLEM IN DEPOT MAINTENANCE

    Directory of Open Access Journals (Sweden)

    Fatih YİĞİT

    2003-02-01

    Full Text Available When full automation is realized in factory automation, material handing systems (MHS have a fairly important role. The most technological development among MHS's has been concentrated on Automated Guided Vehicle (AGV systems. An AGV is an unmanned vehicle capable of following an external guidance signal to deliver a unit load from destination to destination. Nowadays, there are a lot of applications lie along service sector to industrial sector because of flexibilities of AGVs. In this study, these subjects have been applied on the Army Aviation Depot Maintenance where aircraft's and aircraft parts can be maintained and overhauled is an application fields of AGV, requiring AGV numbers and AGV routing. The AGV routing problem and traveling sales person (TSP problems are identical problems; where the AGV routing problem is formulated as a zero one integer programming. Examples are presented to demonstrate the approach and LINGO has been used to solve the example.

  8. Modeling the Energy Use of a Connected and Automated Transportation System (Poster)

    Energy Technology Data Exchange (ETDEWEB)

    Gonder, J.; Brown, A.

    2014-07-01

    Early research points to large potential impacts of connected and automated vehicles (CAVs) on transportation energy use - dramatic savings, increased use, or anything in between. Due to a lack of suitable data and integrated modeling tools to explore these complex future systems, analyses to date have relied on simple combinations of isolated effects. This poster proposes a framework for modeling the potential energy implications from increasing penetration of CAV technologies and for assessing technology and policy options to steer them toward favorable energy outcomes. Current CAV modeling challenges include estimating behavior change, understanding potential vehicle-to-vehicle interactions, and assessing traffic flow and vehicle use under different automation scenarios. To bridge these gaps and develop a picture of potential future automated systems, NREL is integrating existing modeling capabilities with additional tools and data inputs to create a more fully integrated CAV assessment toolkit.

  9. Reduce operational cost and extend the life of pipeline infrastructure by automating remote cathodic protection systems

    Energy Technology Data Exchange (ETDEWEB)

    Rosado, Elroy [Freewave Technologies, Inc., Boulder, CO (United States). Latin America

    2009-07-01

    Energy and Pipeline Companies wrestle to control operating costs largely affected by new government regulations, ageing buried metal assets, rising steel prices, expanding pipeline operations, new interference points, HCA encroachment, restrictive land use policies, heightened network security, and an ageing soon-to-retire work force. With operating costs on the rise, seemingly out of control, many CP and Operations Professionals look to past best practices in cost containment through automation. Many companies achieve solid business results through deployment of telemetry and SCADA automation of remote assets and now hope to expand this success to further optimize operations by automating remote cathodic protection systems. This presentation will provide examples of how new remote cathodic protection systems are helping energy and pipeline companies address the growing issue of the aging pipeline infrastructure and reduce their costs while optimizing their operations. (author)

  10. Providing security for automated process control systems at hydropower engineering facilities

    Science.gov (United States)

    Vasiliev, Y. S.; Zegzhda, P. D.; Zegzhda, D. P.

    2016-12-01

    This article suggests the concept of a cyberphysical system to manage computer security of automated process control systems at hydropower engineering facilities. According to the authors, this system consists of a set of information processing tools and computer-controlled physical devices. Examples of cyber attacks on power engineering facilities are provided, and a strategy of improving cybersecurity of hydropower engineering systems is suggested. The architecture of the multilevel protection of the automated process control system (APCS) of power engineering facilities is given, including security systems, control systems, access control, encryption, secure virtual private network of subsystems for monitoring and analysis of security events. The distinctive aspect of the approach is consideration of interrelations and cyber threats, arising when SCADA is integrated with the unified enterprise information system.

  11. Automated Assume-Guarantee Reasoning for Omega-Regular Systems and Specifications

    Science.gov (United States)

    Chaki, Sagar; Gurfinkel, Arie

    2010-01-01

    We develop a learning-based automated Assume-Guarantee (AG) reasoning framework for verifying omega-regular properties of concurrent systems. We study the applicability of non-circular (AGNC) and circular (AG-C) AG proof rules in the context of systems with infinite behaviors. In particular, we show that AG-NC is incomplete when assumptions are restricted to strictly infinite behaviors, while AG-C remains complete. We present a general formalization, called LAG, of the learning based automated AG paradigm. We show how existing approaches for automated AG reasoning are special instances of LAG.We develop two learning algorithms for a class of systems, called infinite regular systems, that combine finite and infinite behaviors. We show that for infinity-regular systems, both AG-NC and AG-C are sound and complete. Finally, we show how to instantiate LAG to do automated AG reasoning for infinite regular, and omega-regular, systems using both AG-NC and AG-C as proof rules

  12. Driver-centred vehicle automation: using network analysis for agent-based modelling of the driver in highly automated driving systems.

    Science.gov (United States)

    Banks, Victoria A; Stanton, Neville A

    2016-11-01

    To the average driver, the concept of automation in driving infers that they can become completely 'hands and feet free'. This is a common misconception, however, one that has been shown through the application of Network Analysis to new Cruise Assist technologies that may feature on our roads by 2020. Through the adoption of a Systems Theoretic approach, this paper introduces the concept of driver-initiated automation which reflects the role of the driver in highly automated driving systems. Using a combination of traditional task analysis and the application of quantitative network metrics, this agent-based modelling paper shows how the role of the driver remains an integral part of the driving system implicating the need for designers to ensure they are provided with the tools necessary to remain actively in-the-loop despite giving increasing opportunities to delegate their control to the automated subsystems. Practitioner Summary: This paper describes and analyses a driver-initiated command and control system of automation using representations afforded by task and social networks to understand how drivers remain actively involved in the task. A network analysis of different driver commands suggests that such a strategy does maintain the driver in the control loop.

  13. Use of an automated system for detection of canine serum antibodies against Ehrlichia canis glycoprotein 36.

    Science.gov (United States)

    Moroff, Scott; Sokolchik, Irene; Woodring, Todd; Woodruff, Colby; Atkinson, Brett; Lappin, Michael R

    2014-07-01

    Ehrlichia canis is the most common cause of monocytotropic ehrlichiosis in dogs around the world. The purpose of the present study was to validate a new automated fluorescence system (Accuplex4™ BioCD system; Antech Diagnostics, Lake Success, New York) to detect antibodies against the E. canis immunodominant glycoprotein 36 (gp36). Sera and blood samples (ethylenediamine tetra-acetic acid) were collected from mixed sex beagles ( n = 8) on days 0, 3, 7, 10, 14, 17, 21, 28, 42, 49, 56, 63, 70, 77, 84, and 98 after intravenous inoculation with culture-derived E. canis. Sera were assayed using the Accuplex4 BioCD system (Accuplex4), an E. canis indirect fluorescent antibody test (IFAT), and a commercially available kit. A complete blood cell count and a proprietary E. canis polymerase chain reaction (PCR) were performed on each blood sample. On the day thrombocytopenia was first detected for each dog, E. canis DNA was amplified from blood of all dogs. At those times, E. canis antibodies were detected in 7 of 8 dogs by the Accuplex4, 1 of 8 dogs by the commercial kit, and 4 of 8 dogs by IFAT. Ehrlichia canis DNA was amplified from blood before seroconversion in any antibody assay for 6 dogs. Antibodies against gp36 were detected by Accuplex4 within 3 days of PCR-positive test results and were detected up to 25 days sooner than the commercial kit. After starting doxycycline treatment, E. canis DNA was no longer amplified by PCR assay, but serum antibodies remained detectable by all assays.

  14. Conceptual design and implementation of Pulse Automation and Scheduling System for KSTAR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Woongryol, E-mail: wrlee@nfri.re.kr; Lee, Taegu; Park, Jinseop; Hong, Jaesic; Hahn, Sanghee; Han, Hyunsun; Woo, Minho; Park, Kaprai

    2015-10-15

    Highlights: • The world clock based automatic sequential operation manipulator. • Configuration of the Pulse Automation System (PAS) and the Pulse Scheduling System (PSS) • Providing of operational information in voice through an Ethernet interface. • A perceptional operation status, easy time manipulator, and intuitive man machine interface for the purpose of the Tokamak operation. • Generation of the plasma disruption information. - Abstract: The world clock based automatic sequential operation manipulator has been developed and begin to work on the 7th campaign in KSTAR Tokamak. The Pulse Automation and Scheduling System (PASS) divided into Pulse Automation System (PAS) and Pulse Scheduling System (PSS). The PAS is on the online control system and it has communicated with many other local control systems. Before PASS, the plasma experiment was performed manually by using Central Control System (CCS). However the PASS currently manipulates the sequential operation of KSTAR with the programmed shot interval time. It provides readiness check routine, shot time handler, and local system monitoring functions. The PASS has no hardware dependency and it was configured with EPICS extensions. The Real Time Monitoring System, PCS-GATE, Automatic Reporting System, Central Control System, and Timing Synchronization System are well organized and they communicate to each other. The PASS provides perceptual operation status, easy time manipulator, and intuitive man machine interface. The plasma disruption information which is used in the KSTAR standard software framework also comes from the PASS. We describe the functions and system architecture of the Pulse Automation System in this paper. The PSS will be specified inside PASS for the purpose of intelligent system parameterization.

  15. Automated alignment of a reconfigurable optical system using focal-plane sensing and Kalman filtering

    Science.gov (United States)

    Fang, Joyce; Savransky, Dmitry

    2016-08-01

    Automation of alignment tasks can provide improved efficiency and greatly increase the flexibility of an optical system. Current optical systems with automated alignment capabilities are typically designed to include a dedicated wavefront sensor. Here, we demonstrate a self-aligning method for a reconfigurable system using only focal plane images. We define a two lens optical system with eight degrees of freedom. Images are simulated given misalignment parameters using ZEMAX software. We perform a principal component analysis (PCA) on the simulated dataset to obtain Karhunen-Lo\\`eve (KL) modes, which form the basis set whose weights are the system measurements. A model function which maps the state to the measurement is learned using nonlinear least squares fitting and serves as the measurement function for the nonlinear estimator (Extended and Unscented Kalman filters) used to calculate control inputs to align the system. We present and discuss both simulated and experimental results of the full system in operation.

  16. Automated alignment of a reconfigurable optical system using focal-plane sensing and Kalman filtering

    CERN Document Server

    Fang, Joyce

    2016-01-01

    Automation of alignment tasks can provide improved efficiency and greatly increase the flexibility of an optical system. Current optical systems with automated alignment capabilities are typically designed to include a dedicated wavefront sensor. Here, we demonstrate a self-aligning method for a reconfigurable system using only focal plane images. We define a two lens optical system with eight degrees of freedom. Images are simulated given misalignment parameters using ZEMAX software. We perform a principal component analysis (PCA) on the simulated dataset to obtain Karhunen-Lo\\`eve (KL) modes, which form the basis set whose weights are the system measurements. A model function which maps the state to the measurement is learned using nonlinear least squares fitting and serves as the measurement function for the nonlinear estimator (Extended and Unscented Kalman filters) used to calculate control inputs to align the system. We present and discuss both simulated and experimental results of the full system in op...

  17. Development and evaluation of an automated reflectance microscope system for the petrographic characterization of bituminous coals

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, D. S.; Davis, A.

    1980-10-01

    The development of automated coal petrographic techniques will lessen the demands on skilled personnel to do routine work. This project is concerned with the development and successful testing of an instrument which will meet these needs. The fundamental differences in reflectance of the three primary maceral groups should enable their differentiation in an automated-reflectance frequency histogram (reflectogram). Consequently, reflected light photometry was chosen as the method for automating coal petrographic analysis. Three generations of an automated system (called Rapid Scan Versions I, II and III) were developed and evaluated for petrographic analysis. Their basic design was that of a reflected-light microscope photometer with an automatic stage, interfaced with a minicomputer. The hardware elements used in the Rapid Scan Version I limited the system's flexibility and presented problems with signal digitization and measurement precision. Rapid Scan Version II was designed to incorporate a new microscope photometer and computer system. A digital stepping stage was incorporated into the Rapid Scan Version III system. The precision of reflectance determination of this system was found to be +- 0.02 percent reflectance. The limiting factor in quantitative interpretation of Rapid Scan reflectograms is the resolution of reflectance populations of the individual maceral groups. Statistical testing indicated that reflectograms were highly reproducible, and a new computer program, PETAN, was written to interpret the curves for vitrinite reflectance parameters ad petrographic.

  18. High-Throughput, Automated Protein A Purification Platform with Multiattribute LC-MS Analysis for Advanced Cell Culture Process Monitoring.

    Science.gov (United States)

    Dong, Jia; Migliore, Nicole; Mehrman, Steven J; Cunningham, John; Lewis, Michael J; Hu, Ping

    2016-09-06

    The levels of many product related variants observed during the production of monoclonal antibodies are dependent on control of the manufacturing process, especially the cell culture process. However, it is difficult to characterize samples pulled from the bioreactor due to the low levels of product during the early stages of the process and the high levels of interfering reagents. Furthermore, analytical results are often not available for several days, which slows the process development cycle and prevents "real time" adjustments to the manufacturing process. To reduce the delay and enhance our ability to achieve quality targets, we have developed a low-volume, high-throughput, and high-content analytical platform for at-line product quality analysis. This workflow includes an automated, 96-well plate protein A purification step to isolate antibody product from the cell culture fermentation broth, followed by rapid, multiattribute LC-MS analysis. We have demonstrated quantitative correlations between particular process parameters with the levels of glycosylated and glycated species in a series of small scale experiments, but the platform could be used to monitor other attributes and applied across the biopharmaceutical industry.

  19. Safely towards self-driving vehicles : new opportunities new risks and new challenges during the automation of the traffic system.

    NARCIS (Netherlands)

    Nes, C.N. van & Duivenvoorden, C.W.A.E.

    2017-01-01

    There are more and more systems on the market to support the driver in his vehicle. Step by step the automation of our vehicles increases, the traffic system is in a transition towards self-driving vehicles. The automation offers opportunities to make our traffic safer, cleaner and more efficient. H

  20. The screening of more than 2,000 schoolgirls for bacteriuria using an automated fluorescence microscopy system.

    Science.gov (United States)

    Manson, R; Scholefield, J; Johnston, R J; Scott, R

    1985-01-01

    After initial evaluation of a manual fluorescence microscopy system on a variety of urines the method was automated and subsequently tested in a population survey of urinary tract infection in schoolgirls. This automated Bactoscan system allowed a rapid analysis of urine samples and with the introduction of modifications to the staining protocol it correctly eliminated 91% of samples as being not significantly infected.

  1. 15 CFR 30.71 - False or fraudulent reporting on or misuse of the Automated Export System.

    Science.gov (United States)

    2010-01-01

    ... misuse of the Automated Export System. 30.71 Section 30.71 Commerce and Foreign Trade Regulations... REGULATIONS Penalties § 30.71 False or fraudulent reporting on or misuse of the Automated Export System. (a... or indirectly, to the U.S. Government, false or misleading export information through the AES,...

  2. Technical and economical aspects of the electric power systems automation; Aspectos tecnicos e economicos da automacao dos sistemas eletricos

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Gustavo F.G.; Achkar, Luiz Roberto; Yamanaka, Alberto S.

    1997-07-01

    This presents an overview on the technical and economical aspects of the electric power automation. The document analyses the automation necessity, anomalies in the distribution system, noise generators, systems of supervision, control and quality analysis of the energy and technical and financial aspects.

  3. SYRIAC: The systematic review information automated collection system a data warehouse for facilitating automated biomedical text classification.

    Science.gov (United States)

    Yang, Jianji J; Cohen, Aaron M; Cohen, Aaron; McDonagh, Marian S

    2008-11-06

    Automatic document classification can be valuable in increasing the efficiency in updating systematic reviews (SR). In order for the machine learning process to work well, it is critical to create and maintain high-quality training datasets consisting of expert SR inclusion/exclusion decisions. This task can be laborious, especially when the number of topics is large and source data format is inconsistent.To approach this problem, we build an automated system to streamline the required steps, from initial notification of update in source annotation files to loading the data warehouse, along with a web interface to monitor the status of each topic. In our current collection of 26 SR topics, we were able to standardize almost all of the relevance judgments and recovered PMIDs for over 80% of all articles. Of those PMIDs, over 99% were correct in a manual random sample study. Our system performs an essential function in creating training and evaluation data sets for SR text mining research.

  4. Design and Prototype of an Automated Column-Switching HPLC System for Radiometabolite Analysis.

    Science.gov (United States)

    Vasdev, Neil; Collier, Thomas Lee

    2016-08-17

    Column-switching high performance liquid chromatography (HPLC) is extensively used for the critical analysis of radiolabeled ligands and their metabolites in plasma. However, the lack of streamlined apparatus and consequently varying protocols remain as a challenge among positron emission tomography laboratories. We report here the prototype apparatus and implementation of a fully automated and simplified column-switching procedure to allow for the easy and automated determination of radioligands and their metabolites in up to 5 mL of plasma. The system has been used with conventional UV and coincidence radiation detectors, as well as with a single quadrupole mass spectrometer.

  5. Design and Prototype of an Automated Column-Switching HPLC System for Radiometabolite Analysis

    Directory of Open Access Journals (Sweden)

    Neil Vasdev

    2016-08-01

    Full Text Available Column-switching high performance liquid chromatography (HPLC is extensively used for the critical analysis of radiolabeled ligands and their metabolites in plasma. However, the lack of streamlined apparatus and consequently varying protocols remain as a challenge among positron emission tomography laboratories. We report here the prototype apparatus and implementation of a fully automated and simplified column-switching procedure to allow for the easy and automated determination of radioligands and their metabolites in up to 5 mL of plasma. The system has been used with conventional UV and coincidence radiation detectors, as well as with a single quadrupole mass spectrometer.

  6. Differential dynamic logics - automated theorem proving for hybrid systems

    OpenAIRE

    Platzer, André

    2008-01-01

    Hybrid systems are models for complex physical systems and are defined as dynamical systems with interacting discrete transitions and continuous evolutions along differential equations. With the goal of developing a theoretical and practical foundation for deductive verification of hybrid systems, we introduce differential dynamic logic as a new logic with which correctness properties of hybrid systems with parameterized system dynamics can be specified and verified naturally. As a verificati...

  7. MATHEMATICAL MODEL OF REFERRING AUTOMATED SYSTEM DOCUMENTS TO INFORMATION SPHERES OF USERS RESPONSIBILITY

    Directory of Open Access Journals (Sweden)

    Nosenko S. V.

    2013-10-01

    Full Text Available In the article, we present the mathematical model of referring documents entering the automated system to the spheres of users responsibility. The possibility of application of mathematical apparatus of final predicates algebra as a basic means of model description is proved

  8. After the Fall: The Use of Surplus Capacity in an Academic Library Automation System.

    Science.gov (United States)

    Wright, A. J.

    The possible uses of excess central processing unit capacity in an integrated academic library automation system discussed in this draft proposal include (1) in-house services such as word processing, electronic mail, management decision support using PERT/CPM techniques, and control of physical plant operation; (2) public services such as the…

  9. Automated Energy Distribution and Reliability System: Validation Integration - Results of Future Architecture Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Buche, D. L.

    2008-06-01

    This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects. This report is second in a series of reports detailing this effort.

  10. Design of an Automated Essay Grading (AEG) System in Indian Context

    Science.gov (United States)

    Ghosh, Siddhartha; Fatima, Sameen S.

    2007-01-01

    Automated essay grading or scoring systems are no more a myth, but they are a reality. As of today, the human written (not hand written) essays are corrected not only by examiners/teachers but also by machines. The TOEFL exam is one of the best examples of this application. The students' essays are evaluated both by human and web based automated…

  11. THE CYBERSECURITY OF AUTOMATED CONTROL SYSTEMS AS A KEY COMPONENT OF NATIONAL SECURITY

    Directory of Open Access Journals (Sweden)

    Galin R. Ivanov

    2016-10-01

    Full Text Available This article focuses on the current problems raised by the necessity to provide and ensure national cybersecurity. Moreover, it suggests measures for adequate counteraction to present-day cyber threats to automated control systems employed in the sector of national security.

  12. Proceedings 11th International Workshop on Automated Specification and Verification of Web Systems

    DEFF Research Database (Denmark)

    2015-01-01

    These proceedings contain the papers presented at the 11th International Workshop on Automated Specification and Verification of Web Systems (WWV 2015), which was held on 23 June 2015 in Oslo, Norway, as a satellite workshop of the 20th International Symposium on Formal Methods (FM 2015). WWV is ...

  13. An automated system for the measurement of magnetostriction in electrical steel sheet under applied stress

    CERN Document Server

    Anderson, P I; Stanbury, H J

    2000-01-01

    The design of an automated system for the rapid assessment of the AC magnetostriction in electrical steel sheet under linear applied stress in the range +-10 MPa is described in detail. Typical results are presented showing the effect of induction on the unstressed material together with plots of the harmonics of magnetostriction and specific total loss versus applied stress.

  14. Developing mobile BIM/2D barcode-based automated facility management system.

    Science.gov (United States)

    Lin, Yu-Cheng; Su, Yu-Chih; Chen, Yen-Pei

    2014-01-01

    Facility management (FM) has become an important topic in research on the operation and maintenance phase. Managing the work of FM effectively is extremely difficult owing to the variety of environments. One of the difficulties is the performance of two-dimensional (2D) graphics when depicting facilities. Building information modeling (BIM) uses precise geometry and relevant data to support the facilities depicted in three-dimensional (3D) object-oriented computer-aided design (CAD). This paper proposes a new and practical methodology with application to FM that uses an integrated 2D barcode and the BIM approach. Using 2D barcode and BIM technologies, this study proposes a mobile automated BIM-based facility management (BIMFM) system for FM staff in the operation and maintenance phase. The mobile automated BIMFM system is then applied in a selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FM practice. The combined results demonstrate that a BIMFM-like system can be an effective mobile automated FM tool. The advantage of the mobile automated BIMFM system lies not only in improving FM work efficiency for the FM staff but also in facilitating FM updates and transfers in the BIM environment.

  15. Developing Mobile BIM/2D Barcode-Based Automated Facility Management System

    Directory of Open Access Journals (Sweden)

    Yu-Cheng Lin

    2014-01-01

    Full Text Available Facility management (FM has become an important topic in research on the operation and maintenance phase. Managing the work of FM effectively is extremely difficult owing to the variety of environments. One of the difficulties is the performance of two-dimensional (2D graphics when depicting facilities. Building information modeling (BIM uses precise geometry and relevant data to support the facilities depicted in three-dimensional (3D object-oriented computer-aided design (CAD. This paper proposes a new and practical methodology with application to FM that uses an integrated 2D barcode and the BIM approach. Using 2D barcode and BIM technologies, this study proposes a mobile automated BIM-based facility management (BIMFM system for FM staff in the operation and maintenance phase. The mobile automated BIMFM system is then applied in a selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FM practice. The combined results demonstrate that a BIMFM-like system can be an effective mobile automated FM tool. The advantage of the mobile automated BIMFM system lies not only in improving FM work efficiency for the FM staff but also in facilitating FM updates and transfers in the BIM environment.

  16. Study of space shuttle orbiter system management computer function. Volume 2: Automated performance verification concepts

    Science.gov (United States)

    1975-01-01

    The findings are presented of investigations on concepts and techniques in automated performance verification. The investigations were conducted to provide additional insight into the design methodology and to develop a consolidated technology base from which to analyze performance verification design approaches. Other topics discussed include data smoothing, function selection, flow diagrams, data storage, and shuttle hydraulic systems.

  17. Automated synthesis of [18F]gefitinib on a modular system

    NARCIS (Netherlands)

    Läppchen, T.; Vlaming, M.L.H.; Custers, E.; Lub, J.; Sio, C.F.; DeGroot, J.; Steinbach, O.C.

    2012-01-01

    In recent years, [ 18F]gefitinib PET has successfully been employed for a number of applications ranging from oncology to in vivo studies of drug transporter proteins. We here report a reliable, automated procedure for routine synthesis of this radiotracer on an Eckert and Ziegler modular system. Th

  18. Planning and control of automated material handling systems: The merge module

    NARCIS (Netherlands)

    Haneyah, Sameh; Hurink, Johann; Schutten, Marco; Zijm, Henk; Schuur, Peter; Hu, Bo; Morasch, Karl; Pickl, Stefan; Siegle, Markus

    2011-01-01

    We address the field of internal logistics, embodied in Automated Material Handling Systems (AMHSs), which are complex installations employed in sectors such as Baggage Handling, Physical Distribution, and Parcel & Postal. We work on designing an integral planning and real-time control architecture,

  19. Generic Planning and Control of Automated Material Handling Systems: Practical Requirements Versus Existing Theory

    NARCIS (Netherlands)

    Haneyah, Sameh; Zijm, Henk; Schutten, Marco; Schuur, Peter

    2011-01-01

    This paper discusses the problem of generic planning and control of Automated Material Handling Systems (AMHSs). The paper illustrates the relevance of this research direction, and then addresses three different market sectors where AMHSs are used. These market sectors are: baggage handling, distrib

  20. Sequencing Heuristics for Storing and Retrieving Unit Loads in 3D Compact Automated Warehousing Systems

    NARCIS (Netherlands)

    Y. Yu (Yugang); M.B.M. de Koster (René)

    2011-01-01

    textabstractSequencing unit load retrieval requests has been studied extensively in literature for conventional single-deep automated warehousing systems. A proper sequence can greatly reduce the makespan when carrying out a group of such requests. Although the sequencing problem is NP-hard some ver

  1. Automated Meta-Aircraft Operations for a More Efficient and Responsive Air Transportation System

    Science.gov (United States)

    Hanson, Curt

    2015-01-01

    A brief overview is given of the on-going NASA Automated Cooperative Trajectories project. Current status and upcoming work is previewed. The motivating factors and innovative aspects of ACT are discussed along with technical challenges and the expected system-level impacts if the project is successful. Preliminary results from the NASA G-III hardware in the loop simulation are included.

  2. Modeling Multiple Human-Automation Distributed Systems using Network-form Games

    Science.gov (United States)

    Brat, Guillaume

    2012-01-01

    The paper describes at a high-level the network-form game framework (based on Bayes net and game theory), which can be used to model and analyze safety issues in large, distributed, mixed human-automation systems such as NextGen.

  3. Automation System Goals for the Creation and Operation of the Tool

    Science.gov (United States)

    Khisamutdinov, R. M.; Khisamutdinov, M. R.

    2014-12-01

    Complex automation of processes for creation and operating the instrument, consistent linking of hierarchical levels in the single system of collection and processing of data and operations management, integration with TEAMCENTRE PLM and SAP/R3 ERP significantly improve the quality and efficiency of production preparation.

  4. Field-scale validation of an automated soil nitrate extraction and measurement system

    NARCIS (Netherlands)

    Sibley, K.J.; Astatkie, T.; Brewster, G.; Struik, P.C.; Adsett, J.F.; Pruski, K.

    2009-01-01

    One of the many gaps that needs to be solved by precision agriculture technologies is the availability of an economic, automated, on-the-go mapping system that can be used to obtain intensive and accurate ‘real-time’ data on the levels of nitrate nitrogen (NO3–N) in the soil. A soil nitrate mapping

  5. Development of an Automated Requirements Management System for the Space Station Freedom Program

    Science.gov (United States)

    Giffin, Geoff

    1989-01-01

    The Automated Requirements Management System, which is being developed to support traceability and documentation of Space Station Freedom requirements, is described. The objectives of requirements management are validation and verification. Other benefits include comprehensive analytical capabilities, commonality and timeliness of requirements information availability across the program, and the reduction of information duplication and overlap.

  6. Automated Generation of Phase Diagrams for Binary Systems with Azeotropic Behavior

    DEFF Research Database (Denmark)

    Cismondi, Martin; Michelsen, Michael Locht; Zabaloy, Marcelo S.

    2008-01-01

    In this work, we propose a computational strategy and methods for the automated calculation of complete loci of homogeneous azeotropy of binary mixtures and the related Pxy and Txy diagrams for models of the equation-of-state (EOS) type. The strategy consists of first finding the system's azeotro...

  7. 78 FR 56541 - Concept Release on Risk Controls and System Safeguards for Automated Trading Environments

    Science.gov (United States)

    2013-09-12

    ... September 12, 2013 Part IV Commodity Futures Trading Commission 17 CFR Chapter I Concept Release on Risk Controls and System Safeguards for Automated Trading Environments; Proposed Rule #0;#0;Federal Register / Vol. 78 , No. 177 / Thursday, September 12, 2013 / Proposed Rules#0;#0; ] COMMODITY FUTURES...

  8. ZigBee Based Industrial Automation Profile for Power Monitoring Systems

    Directory of Open Access Journals (Sweden)

    Archana R. Raut,

    2011-05-01

    Full Text Available Industrial automations which are mostly depend upon the power systems & which requires distance controlled and regulated systems. Mostly voltage and current equipped parameters along with power and energy management system forms the industrial scenario for automations. Wireless technology which meets to cost, speed and distance scenario will always be a point of an interest for research. In this research work we mainly monitored power related parameters and enable remote switching devices for proper power management systems using ZigBee. This paper proposes a digital system for condition monitoring, diagnosis, and supervisory control for electric systems parameters like voltage and current using wireless sensor networks (WSNs based on ZigBee. Its main feature is its use of the ZigBee protocol as the communication medium between the transmitter and receiver modules. It illustrates that the new ZigBee standard performs well industrial environments.

  9. Automated Cooperative Trajectories for a More Efficient and Responsive Air Transportation System

    Science.gov (United States)

    Hanson, Curt

    2015-01-01

    The NASA Automated Cooperative Trajectories project is developing a prototype avionics system that enables multi-vehicle cooperative control by integrating 1090 MHz ES ADS-B digital communications with onboard autopilot systems. This cooperative control capability will enable meta-aircraft operations for enhanced airspace utilization, as well as improved vehicle efficiency through wake surfing. This briefing describes the objectives and approach to a flight evaluation of this system planned for 2016.

  10. CAMRAD - COMPUTER AIDED MATERIAL REVIEW AUTOMATED DISPOSITION SYSTEM

    Science.gov (United States)

    Hanna, T. L.

    1994-01-01

    The basic function of a manufacturer's production support engineering unit is to identify, document, and dispose of hardware that does not conform to drawing requirements. CAMRAD, a program designed for rapid input and retrieval of all data used in engineering-to-manufacturing support operations, aids the engineer by automating the material review disposition process. Before CAMRAD, material review record searches were manual. The time spent searching through old documents precluded the timely disposition of new material reviews. CAMRAD facilitates the research of material review histories and provides for the efficient processing of material review documents. Three SmartWare project files control the operation of CAMRAD. The project file CAMRAD initializes variables for the other project files and specifies the pathing of the CAMRAD program, database files, and document files. The project file DATARAD controls all data management functions. The database consists of individual files containing all records of specific hardware discrepancies for a given part number. There are four basic avenues for records searches: part serial number, feature, Material Review (MR) number, and non-conformance. WORDRAD is the project file which controls the management of document files created when processing a material review disposition. Given a material review report identifying a defective hardware item, the production support engineer can use CAMRAD to quickly search the database for any history of the same problem, find out how well the problem has been documented, and create appropriate documentation for this latest occurrence. CAMRAD is written in the Smart Programming Language and is designed to run on IBM PC compatibles with the SmartWare v. 3.1 software package available from Informix Software. CAMRAD was developed in 1987. SmartWare is a registered trademark of Informix Software, Inc. IBM PC is a registered trademark of International Business Machines Corporation.

  11. MATLAB-based automated patch-clamp system for awake behaving mice.

    Science.gov (United States)

    Desai, Niraj S; Siegel, Jennifer J; Taylor, William; Chitwood, Raymond A; Johnston, Daniel

    2015-08-01

    Automation has been an important part of biomedical research for decades, and the use of automated and robotic systems is now standard for such tasks as DNA sequencing, microfluidics, and high-throughput screening. Recently, Kodandaramaiah and colleagues (Nat Methods 9: 585-587, 2012) demonstrated, using anesthetized animals, the feasibility of automating blind patch-clamp recordings in vivo. Blind patch is a good target for automation because it is a complex yet highly stereotyped process that revolves around analysis of a single signal (electrode impedance) and movement along a single axis. Here, we introduce an automated system for blind patch-clamp recordings from awake, head-fixed mice running on a wheel. In its design, we were guided by 3 requirements: easy-to-use and easy-to-modify software; seamless integration of behavioral equipment; and efficient use of time. The resulting system employs equipment that is standard for patch recording rigs, moderately priced, or simple to make. It is written entirely in MATLAB, a programming environment that has an enormous user base in the neuroscience community and many available resources for analysis and instrument control. Using this system, we obtained 19 whole cell patch recordings from neurons in the prefrontal cortex of awake mice, aged 8-9 wk. Successful recordings had series resistances that averaged 52 ± 4 MΩ and required 5.7 ± 0.6 attempts to obtain. These numbers are comparable with those of experienced electrophysiologists working manually, and this system, written in a simple and familiar language, will be useful to many cellular electrophysiologists who wish to study awake behaving mice.

  12. Simultaneous identification of various antinuclear antibodies using an automated multiparameter line immunoassay system.

    Science.gov (United States)

    López-Longo, F J; Rodríguez-Mahou, M; Escalona-Monge, M; González, C M; Monteagudo, I; Carreño-Pérez, L

    2003-01-01

    The objective was to determine the sensitivity and specificity of an automated multiparameter line immunoassay system compared with other techniques for the identification of autoantibodies in rheumatic diseases. We studied sera from 90 patients. Anti-U1RNP, anti-Sm, anti-Ro/SS-A, anti-La/SS-B, anti-Jo 1 and anti-Scl 70 antibodies were identified by counterimmunoelectrophoresis (CIE) techniques, enzyme-linked immunosorbent assay (ELISA), immunoblotting (IB) using extracts of rabbit thymus and human placenta, and an automated multiparameter line immunoassay system (INNO-LIA ANA UPDATE K-1090) that detects nine different antibodies simultaneously (anti-U1RNP, anti-Sm, anti-Ro/SS-A, anti-La/SS-B, anti-Scl 70, anti-Jo 1, anticentromere, antihistone, and antiribosomal P protein). The line immunoassay system equaled or surpassed the other techniques in the identification of anti-Sm, anti-La/SS-B, anti-Jo 1 and anti-Scl 70 antibodies (sensitivity 100%, specificity 94-100%) and was similarly effective in the case of anti-U1RNP (sensitivity 87.5%, specificity 93.9%) and anti-Ro/SS-A (sensitivity 91.4%, specificity 87.2%) antibodies. In addition, this technique detected more 52 and 60 kD anti-Ro/SS-A sera than IB. Nine antibodies can be detected with this method at a cost of 25.38 Euros per serum sample. In five hours, 19 sera can be studied. The approximate cost of detecting these nine antibodies with an automated ELISA system would be 28.93 Euros, which allows 10 sera to be studied in four hours. In conclusion, the automated multiparameter line immunoassay system is a valid method for the detection of autoantibodies in rheumatic diseases. Its most notable advantages are automated simultaneous detection of several autoantibodies in the same serum and its lower cost compared with ELISA techniques.

  13. Joint force protection advanced security system (JFPASS) "the future of force protection: integrate and automate"

    Science.gov (United States)

    Lama, Carlos E.; Fagan, Joe E.

    2009-09-01

    The United States Department of Defense (DoD) defines 'force protection' as "preventive measures taken to mitigate hostile actions against DoD personnel (to include family members), resources, facilities, and critical information." Advanced technologies enable significant improvements in automating and distributing situation awareness, optimizing operator time, and improving sustainability, which enhance protection and lower costs. The JFPASS Joint Capability Technology Demonstration (JCTD) demonstrates a force protection environment that combines physical security and Chemical, Biological, Radiological, Nuclear, and Explosive (CBRNE) defense through the application of integrated command and control and data fusion. The JFPASS JCTD provides a layered approach to force protection by integrating traditional sensors used in physical security, such as video cameras, battlefield surveillance radars, unmanned and unattended ground sensors. The optimization of human participation and automation of processes is achieved by employment of unmanned ground vehicles, along with remotely operated lethal and less-than-lethal weapon systems. These capabilities are integrated via a tailorable, user-defined common operational picture display through a data fusion engine operating in the background. The combined systems automate the screening of alarms, manage the information displays, and provide assessment and response measures. The data fusion engine links disparate sensors and systems, and applies tailored logic to focus the assessment of events. It enables timely responses by providing the user with automated and semi-automated decision support tools. The JFPASS JCTD uses standard communication/data exchange protocols, which allow the system to incorporate future sensor technologies or communication networks, while maintaining the ability to communicate with legacy or existing systems.

  14. Advanced Microsystems for Automotive Applications 2015 : Smart Systems for Green and Automated Driving

    CERN Document Server

    Müller, Beate; Meyer, Gereon

    2016-01-01

    This edited volume presents the proceedings of the AMAA 2015 conference, Berlin, Germany. The topical focus of the 2015 conference lies on smart systems for green and automated driving. The automobile of the future has to respond to two major trends, the electrification of the drivetrain, and the automation of the transportation system. These trends will not only lead to greener and safer driving but re-define the concept of the car completely, particularly if they interact with each other in a synergetic way as for autonomous parking and charging, self-driving shuttles or mobile robots. Key functionalities like environment perception are enabled by electronic components and systems, sensors and actuators, communication nodes, cognitive systems and smart systems integration. The book will be a valuable read for research experts and professionals in the automotive industry but the book may also be beneficial for graduate students.

  15. Highly Automated Arrival Management and Control System Suitable for Early NextGen

    Science.gov (United States)

    Swenson, Harry N.; Jung, Jaewoo

    2013-01-01

    This is a presentation of previously published work conducted in the development of the Terminal Area Precision Scheduling and Spacing (TAPSS) system. Included are concept and technical descriptions of the TAPSS system and results from human in the loop simulations conducted at Ames Research Center. The Terminal Area Precision Scheduling and Spacing system has demonstrated through research and extensive high-fidelity simulation studies to have benefits in airport arrival throughput, supporting efficient arrival descents, and enabling mixed aircraft navigation capability operations during periods of high congestion. NASA is currently porting the TAPSS system into the FAA TBFM and STARS system prototypes to ensure its ability to operate in the FAA automation Infrastructure. NASA ATM Demonstration Project is using the the TAPSS technologies to provide the ground-based automation tools to enable airborne Interval Management (IM) capabilities. NASA and the FAA have initiated a Research Transition Team to enable potential TAPSS and IM Technology Transfer.

  16. Formal Abstractions for Automated Verification and Synthesis of Stochastic Systems

    NARCIS (Netherlands)

    Esmaeil Zadeh Soudjani, S.

    2014-01-01

    Stochastic hybrid systems involve the coupling of discrete, continuous, and probabilistic phenomena, in which the composition of continuous and discrete variables captures the behavior of physical systems interacting with digital, computational devices. Because of their versatility and generality, m

  17. A performance analysis system for MEMS using automated imaging methods

    Energy Technology Data Exchange (ETDEWEB)

    LaVigne, G.F.; Miller, S.L.

    1998-08-01

    The ability to make in-situ performance measurements of MEMS operating at high speeds has been demonstrated using a new image analysis system. Significant improvements in performance and reliability have directly resulted from the use of this system.

  18. System engineering and automation an interactive educational approach

    CERN Document Server

    Fernandez de Canete, Javier; Garcia-Moral, Inmaculada

    2011-01-01

    This book provides insight and enhanced appreciation of analysis, modeling and control of dynamic systems. It presents realistic problems in order to analyze, design and develop automatic control systems.

  19. Zigbee Technology and its Application in Wireless Home Automation Systems: A Survey [

    Directory of Open Access Journals (Sweden)

    Thoraya Obaid

    2014-07-01

    Full Text Available Wireless home automation systems have drawn conside rable attentions of the researchers for more than a decade. The major technologies used to implement th ese systems include Z-Wave, Insteon, Wavenis, Bluetooth, WiFi, and ZigBee. Among these technologi es the ZigBee based systems have become very popula r because of its low cost and low power consumption. In this paper ZigBee based wireless home automation systems have been addressed. There are two main par ts of this paper. In the first part a brief introdu ction of the ZigBee technology has been presented and in the second part a survey work on the ZigBee based wire less home automation system has been presented. The perf ormances of the ZigBee based systems have also been compared with those of other competing technologies based systems. In addition some future opportuniti es and challenges of the ZigBee based systems have bee n listed in this paper.

  20. Analysis of Complexity Evolution Management and Human Performance Issues in Commercial Aircraft Automation Systems

    Science.gov (United States)

    Vakil, Sanjay S.; Hansman, R. John

    2000-01-01

    Autoflight systems in the current generation of aircraft have been implicated in several recent incidents and accidents. A contributory aspect to these incidents may be the manner in which aircraft transition between differing behaviours or 'modes.' The current state of aircraft automation was investigated and the incremental development of the autoflight system was tracked through a set of aircraft to gain insight into how these systems developed. This process appears to have resulted in a system without a consistent global representation. In order to evaluate and examine autoflight systems, a 'Hybrid Automation Representation' (HAR) was developed. This representation was used to examine several specific problems known to exist in aircraft systems. Cyclomatic complexity is an analysis tool from computer science which counts the number of linearly independent paths through a program graph. This approach was extended to examine autoflight mode transitions modelled with the HAR. A survey was conducted of pilots to identify those autoflight mode transitions which airline pilots find difficult. The transitions identified in this survey were analyzed using cyclomatic complexity to gain insight into the apparent complexity of the autoflight system from the perspective of the pilot. Mode transitions which had been identified as complex by pilots were found to have a high cyclomatic complexity. Further examination was made into a set of specific problems identified in aircraft: the lack of a consistent representation of automation, concern regarding appropriate feedback from the automation, and the implications of physical limitations on the autoflight systems. Mode transitions involved in changing to and leveling at a new altitude were identified across multiple aircraft by numerous pilots. Where possible, evaluation and verification of the behaviour of these autoflight mode transitions was investigated via aircraft-specific high fidelity simulators. Three solution

  1. Assessment for Operator Confidence in Automated Space Situational Awareness and Satellite Control Systems

    Science.gov (United States)

    Gorman, J.; Voshell, M.; Sliva, A.

    2016-09-01

    The United States is highly dependent on space resources to support military, government, commercial, and research activities. Satellites operate at great distances, observation capacity is limited, and operator actions and observations can be significantly delayed. Safe operations require support systems that provide situational understanding, enhance decision making, and facilitate collaboration between human operators and system automation both in-the-loop, and on-the-loop. Joint cognitive systems engineering (JCSE) provides a rich set of methods for analyzing and informing the design of complex systems that include both human decision-makers and autonomous elements as coordinating teammates. While, JCSE-based systems can enhance a system analysts' understanding of both existing and new system processes, JCSE activities typically occur outside of traditional systems engineering (SE) methods, providing sparse guidance about how systems should be implemented. In contrast, the Joint Director's Laboratory (JDL) information fusion model and extensions, such as the Dual Node Network (DNN) technical architecture, provide the means to divide and conquer such engineering and implementation complexity, but are loosely coupled to specialized organizational contexts and needs. We previously describe how Dual Node Decision Wheels (DNDW) extend the DNN to integrate JCSE analysis and design with the practicalities of system engineering and implementation using the DNN. Insights from Rasmussen's JCSE Decision Ladders align system implementation with organizational structures and processes. In the current work, we present a novel approach to assessing system performance based on patterns occurring in operational decisions that are documented by JCSE processes as traces in a decision ladder. In this way, system assessment is closely tied not just to system design, but the design of the joint cognitive system that includes human operators, decision-makers, information systems, and

  2. Evaluation of bacterial contamination rate of the anterior chamber during phacoemulsification surgery using an automated microbial detection system

    Institute of Scientific and Technical Information of China (English)

    Ibrahim; Kocak; Funda; Kocak; Bahri; Teker; Ali; Aydin; Faruk; Kaya; Hakan; Baybora

    2014-01-01

    ·AIM: To assess the incidence of anterior chamber bacterial contamination during phacoemulsification surgery using an automated microbial detection system(BacT/Alert).·METHODS: Sixty-nine eyes of 60 patients who had uneventful phacoemulsification surgery, enrolled in this prospective study. No prophylactic topical or systemic antibiotics were used before surgery. After antisepsis with povidone-iodine, two intraoperative anterior chamber aqueous samples were obtained, the first whilst entering anterior chamber, and the second at the end of surgery. BacT/Alert culture system was used to detect bacterial contamination in the aqueous samples.·RESULTS: Neither aqueous samples obtained at the beginning nor conclusion of the surgery was positive for microorganisms on BacT/Alert culture system. The rate of bacterial contamination during surgery was 0%. None of the eyes developed acute-onset endophthalmitis after surgery.· CONCLUSION: In this study, no bacterial contamination of anterior chamber was observed during cataract surgery. This result shows that meticulous surgical preparation and technique can prevent anterior chamber contamination during phacoemulsification cataract surgery.

  3. Towards an Automated Requirements-driven Development of Smart Cyber-Physical Systems

    Directory of Open Access Journals (Sweden)

    Jiri Vinarek

    2016-03-01

    Full Text Available The Invariant Refinement Method for Self Adaptation (IRM-SA is a design method targeting development of smart Cyber-Physical Systems (sCPS. It allows for a systematic translation of the system requirements into the system architecture expressed as an ensemble-based component system (EBCS. However, since the requirements are captured using natural language, there exists the danger of their misinterpretation due to natural language requirements' ambiguity, which could eventually lead to design errors. Thus, automation and validation of the design process is desirable. In this paper, we (i analyze the translation process of natural language requirements into the IRM-SA model, (ii identify individual steps that can be automated and/or validated using natural language processing techniques, and (iii propose suitable methods.

  4. Validation of the process control system of an automated large scale manufacturing plant.

    Science.gov (United States)

    Neuhaus, H; Kremers, H; Karrer, T; Traut, R H

    1998-02-01

    The validation procedure for the process control system of a plant for the large scale production of human albumin from plasma fractions is described. A validation master plan is developed, defining the system and elements to be validated, the interfaces with other systems with the validation limits, a general validation concept and supporting documentation. Based on this master plan, the validation protocols are developed. For the validation, the system is subdivided into a field level, which is the equipment part, and an automation level. The automation level is further subdivided into sections according to the different software modules. Based on a risk categorization of the modules, the qualification activities are defined. The test scripts for the different qualification levels (installation, operational and performance qualification) are developed according to a previously performed risk analysis.

  5. NextGen Technologies on the FAA's Standard Terminal Automation Replacement System

    Science.gov (United States)

    Witzberger, Kevin; Swenson, Harry; Martin, Lynne; Lin, Melody; Cheng, Jinn-Hwei

    2014-01-01

    This paper describes the integration, evaluation, and results from a high-fidelity human-in-the-loop (HITL) simulation of key NASA Air Traffic Management Technology Demonstration - 1 (ATD- 1) technologies implemented in an enhanced version of the FAA's Standard Terminal Automation Replacement System (STARS) platform. These ATD-1 technologies include: (1) a NASA enhanced version of the FAA's Time-Based Flow Management, (2) a NASA ground-based automation technology known as controller-managed spacing (CMS), and (3) a NASA advanced avionics airborne technology known as flight-deck interval management (FIM). These ATD-1 technologies have been extensively tested in large-scale HITL simulations using general-purpose workstations to study air transportation technologies. These general purpose workstations perform multiple functions and are collectively referred to as the Multi-Aircraft Control System (MACS). Researchers at NASA Ames Research Center and Raytheon collaborated to augment the STARS platform by including CMS and FIM advisory tools to validate the feasibility of integrating these automation enhancements into the current FAA automation infrastructure. NASA Ames acquired three STARS terminal controller workstations, and then integrated the ATD-1 technologies. HITL simulations were conducted to evaluate the ATD-1 technologies when using the STARS platform. These results were compared with the results obtained when the ATD-1 technologies were tested in the MACS environment. Results collected from the numerical data show acceptably minor differences, and, together with the subjective controller questionnaires showing a trend towards preferring STARS, validate the ATD-1/STARS integration.

  6. An automated computer misuse detection system for UNICOS

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, K.A.; Neuman, M.C.; Simmonds, D.D.; Stallings, C.A.; Thompson, J.L.; Christoph, G.G.

    1994-09-27

    An effective method for detecting computer misuse is the automatic monitoring and analysis of on-line user activity. This activity is reflected in the system audit record, in the system vulnerability posture, and in other evidence found through active testing of the system. During the last several years we have implemented an automatic misuse detection system at Los Alamos. This is the Network Anomaly Detection and Intrusion Reporter (NADIR). We are currently expanding NADIR to include processing of the Cray UNICOS operating system. This new component is called the UNICOS Realtime NADIR, or UNICORN. UNICORN summarizes user activity and system configuration in statistical profiles. It compares these profiles to expert rules that define security policy and improper or suspicious behavior. It reports suspicious behavior to security auditors and provides tools to aid in follow-up investigations. The first phase of UNICORN development is nearing completion, and will be operational in late 1994.

  7. Automation Comparison Procedure for Verification of Hybrid Systems.

    Science.gov (United States)

    1997-11-01

    Lecture Notes in Computer Science vol. 999, Springer-Verlag, (1995). [2] Bowler, 0., Grotzky, J., Nielson, M., Nilson.S., and Van Buren, J...Remmel, J.B., "Feedback Derivations: Near Optimal Controls for Hybrid Systems", to appear in Hybrid Systems III, Springer Lecture Notes in Computer Science . [6...Grossman, R.L., Nerode, A., Ravn, A. and Rischel, H. eds., Hybrid Systems, Lecture Notes in Computer

  8. FUZZY CONTROLLED AUTOMATION SYSTEM FOR THE MAIN COAL BUNKER

    Institute of Scientific and Technical Information of China (English)

    邵良杉; 叶景楼; 付华

    1997-01-01

    A fuzzy control scheme is presented according to the coal quantity in the main coal bunker, this method has a good dynamic response characteristic and is suited for complex nonlinear systems. The designation of self-adopting fuzzy controller, the working principle and functions of this system are also proposed, with the hardware and the main flow diagram of this system introduced in this paper.

  9. Guidelines for Managing the Implementation of Automated Medical Systems

    OpenAIRE

    Brown, Bob; Harbort, Bob; Kaplan, Bonnie; Maxwell, Joseph

    1981-01-01

    The nontechnical aspects of medical computing systems are as important as the technical. We offer some reasons why. We discuss the social context of systems, the human engineering necessary for medical systems to work, and the specifics of the man machine interface. We offer some suggestions for planning for the change which comes with any new method. Finally, we take a step that has often been neglected in such “how to do it” approaches and describe a theoretical framework for understanding ...

  10. Machine vision system for automated detection of stained pistachio nuts

    Science.gov (United States)

    Pearson, Tom C.

    1995-01-01

    A machine vision system was developed to separate stained pistachio nuts, which comprise of about 5% of the California crop, from unstained nuts. The system may be used to reduce labor involved with manual grading or to remove aflatoxin contaminated product from low grade process streams. The system was tested on two different pistachio process streams: the bi- chromatic color sorter reject stream and the small nut shelling stock stream. The system had a minimum overall error rate of 14% for the bi-chromatic sorter reject stream and 15% for the small shelling stock stream.

  11. System Development Report for Automated Polymer Die Attach Machine.

    Science.gov (United States)

    1981-12-18

    controlled variables in an effort to reduce cost while maintaining or increasing equipment volume handling capability. An important area in which this can...8217 -, ~Lk~L The final ’design activty which is specifibd in Task 0003 of Army’ Contract #DAAHO1-81-D-AO02 is included in a separate volume entitled...Placement Rate 11 5 6 R-4 System - Die Placement Rate 12 7 X-Y System - Plan View 14 8 R4 System - Plan View 15 9 Photograph of SPAR Based System Mockup 17 p

  12. Fuel lattice design in a boiling water reactor using a knowledge-based automation system

    Energy Technology Data Exchange (ETDEWEB)

    Tung, Wu-Hsiung, E-mail: wstong@iner.gov.tw; Lee, Tien-Tso; Kuo, Weng-Sheng; Yaur, Shung-Jung

    2015-11-15

    Highlights: • An automation system was developed for the fuel lattice radial design of BWRs. • An enrichment group peaking equalizing method is applied to optimize the design. • Several heuristic rules and restrictions are incorporated to facilitate the design. • The CPU time for the system to design a 10x10 lattice was less than 1.2 h. • The beginning-of-life LPF was improved from 1.319 to 1.272 for one of the cases. - Abstract: A knowledge-based fuel lattice design automation system for BWRs is developed and applied to the design of 10 × 10 fuel lattices. The knowledge implemented in this fuel lattice design automation system includes the determination of gadolinium fuel pin location, the determination of fuel pin enrichment and enrichment distribution. The optimization process starts by determining the gadolinium distribution based on the pin power distribution of a flat enrichment lattice and some heuristic rules. Next, a pin power distribution flattening and an enrichment grouping process are introduced to determine the enrichment of each fuel pin enrichment type and the initial enrichment distribution of a fuel lattice design. Finally, enrichment group peaking equalizing processes are performed to achieve lower lattice peaking. Several fuel lattice design constraints are also incorporated in the automation system such that the system can accomplish a design which meets the requirements of practical use. Depending on the axial position of the lattice, a different method is applied in the design of the fuel lattice. Two typical fuel lattices with U{sup 235} enrichment of 4.471% and 4.386% were taken as references. Application of the method demonstrates that improved lattice designs can be achieved through the enrichment grouping and the enrichment group peaking equalizing method. It takes about 11 min and 1 h 11 min of CPU time for the automation system to accomplish two design cases on an HP-8000 workstation, including the execution of CASMO-4

  13. User Characteristics、User Involvement and Technology Acceptance in Library Automation System Usage

    Directory of Open Access Journals (Sweden)

    Piching Chu

    2002-12-01

    Full Text Available This paper looks into the relationship of user characteristics, user involvement and technology acceptance, also try to find the relationship of the above three variables and library automation system usage. By interview and questionnaire study, the results are described, according to the analysis of the relative literature and the main conclusions, the researcher offers some suggestions for improving the system usage.[Article content in Chinese

  14. Performance of an Automated-Mixed-Traffic-Vehicle /AMTV/ System. [urban people mover

    Science.gov (United States)

    Peng, T. K. C.; Chon, K.

    1978-01-01

    This study analyzes the operation and evaluates the expected performance of a proposed automatic guideway transit system which uses low-speed Automated Mixed Traffic Vehicles (AMTV's). Vehicle scheduling and headway control policies are evaluated with a transit system simulation model. The effect of mixed-traffic interference on the average vehicle speed is examined with a vehicle-pedestrian interface model. Control parameters regulating vehicle speed are evaluated for safe stopping and passenger comfort.

  15. Automated business processes in outbound logistics: An information system perspective

    DEFF Research Database (Denmark)

    Tambo, Torben

    2010-01-01

    by securing a much higher quality of data and eliminating a number of defect management processes in the domain of fashion wholesale and retail. The information system perspective is used in dealing with adopting bespoke ERP development effort of creating an ERP system on the leading edge of business process...

  16. New Automated System Available for Reporting Safety Concerns | Poster

    Science.gov (United States)

    A new system has been developed for reporting safety issues in the workplace. The Environment, Health, and Safety’s (EHS’) Safety Inspection and Issue Management System (SIIMS) is an online resource where any employee can report a problem or issue, said Siobhan Tierney, program manager at EHS.

  17. Automated Hydraulic System Design and Power Management in Mobile Applications

    DEFF Research Database (Denmark)

    Pedersen, Henrik Clemmensen

    and therefore there is today a shift towards using electric drives as replacement for hydraulic drives. There are, however, a number of different areas, where hydraulic systems offers possibilities that cannot be matched by electric drives, as the hydraulic systems are typically characterised by a much higher...... and accuracy, energy consumption is becoming an ever more important design parameter. At the same time as the first oil crisis the first hydraulic load sensing (LS) systems also emerged on the market, which, compared to the other systems of the time, offered significant energy saving potentials and which today...... do either not exist for ensuring that the system designed is actually suited for a given application. Today a change is furthermore happening, where new and more intelligent components, which are electrically controllable, are emerging and more and more sensors are finding their way...

  18. Distributed fusion and automated sensor tasking in ISR systems

    Science.gov (United States)

    Preden, Jurgo; Pahtma, Raido; Astapov, Sergei; Ehala, Johannes; Riid, Andri; Motus, Leo

    2014-06-01

    Modern Intelligence, Surveillance and Reconnaissance (ISR) systems are increasingly being assembled from autonomous systems, so the resulting ISR system is a System of Systems (SoS). In order to take full advantage of the capabilities of the ISR SoS, the architecture and the design of these SoS should be able to facilitate the benefits inherent in a SoS approach - high resilience, higher level of adaptability and higher diversity, enabling on-demand system composition. The tasks performed by ISR SoS can well go beyond basic data acquisition, conditioning and communication as data processing can be easily integrated in the SoS. Such an ISR SoS can perform data fusion, classification and tracking (and conditional sensor tasking for additional data acquisition), these are extremely challenging tasks in this context, especially if the fusion is performed in a distributed manner. Our premise for the ISR SoS design and deployment is that the system is not designed as a complete system, where the capabilities of individual data providers are considered and the interaction paths, including communication channel capabilities, are specified at design time. Instead, we assume a loosely coupled SoS, where the data needs for a specific fusion task are described at a high level at design time and data providers (i.e., sensor systems) required for a specific fusion task are discovered dynamically at run time, the selection criteria for the data providers being the type and properties of data that can be provided by the specific data provider. The paper describes some of the aspects of a distributed ISR SoS design and implementation, bringing examples on both architectural design as well as on algorithm implementations.

  19. An Imaging System for Automated Characteristic Length Measurement of Debrisat Fragments

    Science.gov (United States)

    Moraguez, Mathew; Patankar, Kunal; Fitz-Coy, Norman; Liou, J.-C.; Sorge, Marlon; Cowardin, Heather; Opiela, John; Krisko, Paula H.

    2015-01-01

    The debris fragments generated by DebriSat's hypervelocity impact test are currently being processed and characterized through an effort of NASA and USAF. The debris characteristics will be used to update satellite breakup models. In particular, the physical dimensions of the debris fragments must be measured to provide characteristic lengths for use in these models. Calipers and commercial 3D scanners were considered as measurement options, but an automated imaging system was ultimately developed to measure debris fragments. By automating the entire process, the measurement results are made repeatable and the human factor associated with calipers and 3D scanning is eliminated. Unlike using calipers to measure, the imaging system obtains non-contact measurements to avoid damaging delicate fragments. Furthermore, this fully automated measurement system minimizes fragment handling, which reduces the potential for fragment damage during the characterization process. In addition, the imaging system reduces the time required to determine the characteristic length of the debris fragment. In this way, the imaging system can measure the tens of thousands of DebriSat fragments at a rate of about six minutes per fragment, compared to hours per fragment in NASA's current 3D scanning measurement approach. The imaging system utilizes a space carving algorithm to generate a 3D point cloud of the article being measured and a custom developed algorithm then extracts the characteristic length from the point cloud. This paper describes the measurement process, results, challenges, and future work of the imaging system used for automated characteristic length measurement of DebriSat fragments.

  20. Investigating the feasibility of scale up and automation of human induced pluripotent stem cells cultured in aggregates in feeder free conditions.

    Science.gov (United States)

    Soares, Filipa A C; Chandra, Amit; Thomas, Robert J; Pedersen, Roger A; Vallier, Ludovic; Williams, David J

    2014-03-10

    The transfer of a laboratory process into a manufacturing facility is one of the most critical steps required for the large scale production of cell-based therapy products. This study describes the first published protocol for scalable automated expansion of human induced pluripotent stem cell lines growing in aggregates in feeder-free and chemically defined medium. Cells were successfully transferred between different sites representative of research and manufacturing settings; and passaged manually and using the CompacT SelecT automation platform. Modified protocols were developed for the automated system and the management of cells aggregates (clumps) was identified as the critical step. Cellular morphology, pluripotency gene expression and differentiation into the three germ layers have been used compare the outcomes of manual and automated processes.

  1. Cost-Effective Telemetry and Command Ground Systems Automation Strategy for the Soil Moisture Active Passive (SMAP) Mission

    Science.gov (United States)

    Choi, Joshua S.; Sanders, Antonio L.

    2012-01-01

    Soil Moisture Active Passive (SMAP) is an Earth-orbiting, remote-sensing NASA mission slated for launch in 2014.[double dagger] The ground data system (GDS) being developed for SMAP is composed of many heterogeneous subsystems, ranging from those that support planning and sequencing to those used for real-time operations, and even further to those that enable science data exchange. A full end-to-end automation of the GDS may result in cost savings during mission operations, but it would require a significant upfront investment to develop such comprehensive automation. As demonstrated by the Jason-1 and Wide-field Infrared Survey Explorer (WISE) missions, a measure of "lights-out" automation for routine, orbital pass ground operations can still reduce mission cost through smaller staffing of operators and limited work hours. The challenge, then, for the SMAP GDS engineering team is to formulate an automated operations strategy--and corresponding system architecture--to minimize operator intervention during operations, while balancing the development cost associated with the scope and complexity of automation. This paper discusses the automated operations approach being developed for the SMAP GDS. The focus is on automating the activities involved in routine passes, which limits the scope to real-time operations. A key subsystem of the SMAP GDS--NASA's AMMOS Mission Data Processing and Control System (AMPCS)--provides a set of capabilities that enable such automation. Also discussed are the lights-out pass automations of the Jason-1 and WISE missions and how they informed the automation strategy for SMAP. The paper aims to provide insights into what is necessary in automating the GDS operations for Earth satellite missions.

  2. Anthony Pro - Human Automation Interaction in Aerospace Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposed project aims to demonstrate the feasibility and utility of a data mining system designed to facilitate the interpretation of information obtained from...

  3. Automated Mulitple Object Optical Tracking and Recognition System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — OPTRA proposes to develop an optical tracking system that is capable of recognizing and tracking up to 50 different objects within an approximately 2 degree x 3...

  4. 47 CFR 80.385 - Frequencies for automated systems.

    Science.gov (United States)

    2010-10-01

    ... the United States Navy's SPASUR radar system (216.88-217.08 MHz) or to TV reception within the Grade B... Commission on a case-by-case basis upon submission of a technical analysis indicating that at least 18...

  5. Automated site characterization for robotic sample acquisition systems

    Science.gov (United States)

    Scholl, Marija S.; Eberlein, Susan; Yates, Gigi; Schumate, Michael S.; Majani, Eric; Anderson, Charles H.; Sloan, Jeffrey A.

    1991-01-01

    A mobile, semi-autonomous vehicle with multiple sensors and on-board intelligence is proposed for performing preliminary scientific investigations on extraterrestrial bodies prior to human exploration. Two technologies, a hybrid optical-digital computer system based on optical correlator technology and an image and instrument data analysis system, provide complementary capabilities which might be part of an instrument package for an intelligent robotic vehicle. The hybrid digital-optical vision system could perform real-time image classification tasks using an optical correlator with programmable matched filters under control of a digital microcomputer. The data analysis system would analyze visible and multiband imagery to extract mineral composition and textural information for geologic characterization. Together these technologies would support the site characterization needs of a robotic vehicle for both navigational and scientific purposes.

  6. Automated Flight Safety Inference Engine (AFSIE) System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop an innovative Autonomous Flight Safety Inference Engine (AFSIE) system to autonomously and reliably terminate the flight of an errant launch...

  7. E-Park: Automated-Ticketing Parking Meter System

    OpenAIRE

    Kulesza, Mateusz J.

    2015-01-01

    E-Park is an electronic parking meter system which enables real-time ticketing of illegally parked vehicles. The system is a drop-in replacement for existing curb-side parking meters. It consists of lowpower front-end parking meter hardware and a back-end server that handles the information database management. Wireless network communication enables the parking meter to accept electronic payment, enforce parking regulation, and ticket parking violators by capturing an image of the vehicle lic...

  8. ORDER-PICKING OPTIMIZATION FOR AUTOMATED PICKING SYSTEM WITH PARALLEL DISPENSERS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the characteristics of parallel dispensers in automated picking system, an order-picking optimization problem is presented. Firstly, the working principle of parallel dispensers is introduced, which implies the time cost of picking each order is influenced by the order-picking sequence. So the order-picking optimization problem can be classified as a dynamic traveling salesman problem (TSP). Then a mathematical model of the problem is established and an improved max-min ant system (MMAS) is adopted to solve the model. The improvement includes two aspects. One is that the initial assignment of ants depends on a probabilistic formula instead of a random deployment; the other is that the heuristic factor is expressed by the extra picking time of each order instead of the total. At last, an actual simulation is made on an automated picking system with parallel dispensers. The simulation results proved the optimization value and the validity of improvement on MMAS.

  9. Knowledge structure representation and automated updates in intelligent information management systems

    Science.gov (United States)

    Corey, Stephen; Carnahan, Richard S., Jr.

    1990-01-01

    A continuing effort to apply rapid prototyping and Artificial Intelligence techniques to problems associated with projected Space Station-era information management systems is examined. In particular, timely updating of the various databases and knowledge structures within the proposed intelligent information management system (IIMS) is critical to support decision making processes. Because of the significantly large amounts of data entering the IIMS on a daily basis, information updates will need to be automatically performed with some systems requiring that data be incorporated and made available to users within a few hours. Meeting these demands depends first, on the design and implementation of information structures that are easily modified and expanded, and second, on the incorporation of intelligent automated update techniques that will allow meaningful information relationships to be established. Potential techniques are studied for developing such an automated update capability and IIMS update requirements are examined in light of results obtained from the IIMS prototyping effort.

  10. An automated telephone-based smoking cessation education and counseling system.

    Science.gov (United States)

    Ramelson, H Z; Friedman, R H; Ockene, J K

    1999-02-01

    Automated patient education and counseling over the telephone is a convenient and inexpensive method for modifying health-related behaviors. A computer-controlled, telecommunications technology called Telephone-Linked Care (TLC) was used to develop a behavioral intervention to assist smokers to quit and to prevent relapse. The education and counseling is offered through a series of interactive telephone conversations which can take place in the smoker's home. The system's automated dialogues are driven by an expert system that controls the logic. The content is derived from the Transtheoretical Model of behavioral change, principles of Social Cognitive Theory, strategies of patient-centered counseling and recommendations of clinical experts in smoking cessation. The system asks questions, provides information, gives positive reinforcement and feedback, and makes suggestions for behavioral change. Information that the patient communicates is stored and is used to influence the content of subsequent conversations.

  11. Functional requirements for the Automated Transportation Management System: TTP number: RL 439002

    Energy Technology Data Exchange (ETDEWEB)

    Portsmouth, J.H. [Westinghouse Hanford Co., Richland, WA (United States)

    1992-12-31

    This requirements analysis, documents Department of Energy (DOE) transportation management procedures for the purpose of providing a clear and mutual understanding between users and designers of the proposed Automated Transportation Management System (ATMS). It is imperative that one understand precisely how DOE currently performs traffic management tasks; only then can an integrated system be proposed that successfully satisfies the major requirements of transportation managers and other system users. Accordingly, this report describes the current workings of DOE transportation organizations and then proposes a new system which represents a synthesis of procedures (both current and desired) which forms the basis for further systems development activities.

  12. Hospital automation system RFID-based: technology embedded in smart devices (cards, tags and bracelets).

    Science.gov (United States)

    Florentino, Gustavo H P; Paz de Araujo, Carlos A; Bezerra, Heitor U; Junior, Helio B A; Xavier, Marcelo Araujo; de Souza, Vinicius S V; de M Valentim, Ricardo A A; Morais, Antonio H F; Guerreiro, Ana M G; Brandao, Glaucio B

    2008-01-01

    RFID is a technology being adopted in many business fields, especially in the medical field. This work has the objective to present a system for automation of a hospital clinical analysis laboratory. This system initially uses contactless smart cards to store patient's data and for authentication of hospital employees in the system. The proposed system also uses RFID tags stuck to containers containing patient's collected samples for the correct identification of the patient who gave away the samples. This work depicts a hospital laboratory workflow, presents the system modeling and deals with security matters related to information stored in the smart cards.

  13. Family systems theory, attachment theory, and culture.

    Science.gov (United States)

    Rothbaum, Fred; Rosen, Karen; Ujiie, Tatsuo; Uchida, Nobuko

    2002-01-01

    Family systems theory and attachment theory have important similarities and complementarities. Here we consider two areas in which the theories converge: (a) in family system theorists' description of an overly close, or "enmeshed," mother-child dyad, which attachment theorists conceptualize as the interaction of children's ambivalent attachment and mothers' preoccupied attachment; (b) in family system theorists' description of the "pursuer-distance cycle" of marital conflict, which attachment theorists conceptualize as the interaction of preoccupied and dismissive partners. We briefly review family systems theory evidence, and more extensively review attachment theory evidence, pertaining to these points of convergence. We also review cross-cultural research, which leads us to conclude that the dynamics described in both theories reflect, in part, Western ways of thinking and Western patterns of relatedness. Evidence from Japan suggests that extremely close ties between mother and child are perceived as adaptive, and are more common, and that children experience less adverse effects from such relationships than do children in the West. Moreover, in Japan there is less emphasis on the importance of the exclusive spousal relationship, and less need for the mother and father to find time alone to rekindle romantic, intimate feelings and to resolve conflicts by openly communicating their differences. Thus, the "maladaptive" pattern frequently cited by Western theorists of an extremely close mother-child relationship, an unromantic, conflictual marriage characterized by little verbal communication and a peripheral, distant father, may function very differently in other cultures. While we believe that both theories will be greatly enriched by their integration, we caution against the application of either theory outside the cultures in which they were developed.

  14. Comparison between a second generation automated multicapillary electrophoresis system with an automated agarose gel electrophoresis system for the detection of M-components.

    Science.gov (United States)

    Larsson, Anders; Hansson, Lars-Olof

    2008-01-01

    During the last decade, capillary electrophoresis (CE) has emerged as an interesting alternative to traditional analysis of serum, plasma and urine proteins by agarose gel electrophoresis. Initially there was a considerable difference in resolution between the two methods but the quality of CE has improved significantly. We thus wanted to evaluate a second generation of automated multicapillary instruments (Capillarys, Sebia, Paris, France) and the high resolution (HR) buffer for serum or plasma protein analysis with an automated agarose gel electrophoresis system for the detection of M-components. The comparison between the two systems was performed with patients samples with and without M-components. The comparison included 76 serum samples with M-components > 1 g/L. There was a total agreement between the two methods for detection of these M-components. When studying samples containing oligoclonal bands/small M-components, there were differences between the two systems. The capillary electrophoresis system detected a slightly higher number of samples with oligoclonal bands but the two systems found oligoclonal bands in different samples. When looking at resolution, the agarose gel electrophoresis system yielded a slightly better resolution in the alpha and beta regions, but it required an experienced interpreter to be able to benefit from the increased resolution. The capillary electrophoresis has shorter turn-around times and bar-code reader that allows positive sample identification. The Capillarys in combination with HR buffer gives better resolution of the alpha and beta regions than the same instrument with the beta1-beta2+ buffer or the Paragon CZE2000 (Beckman) which was the first generation of capillary electrophoresis systems.

  15. Improvement of an automated protein crystal exchange system PAM for high-throughput data collection

    Energy Technology Data Exchange (ETDEWEB)

    Hiraki, Masahiko, E-mail: masahiko.hiraki@kek.jp; Yamada, Yusuke; Chavas, Leonard M. G. [High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Wakatsuki, Soichi [High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); SLAC National Accelerator Laboratory, 2575 Sand Hill Road, MS 69, Menlo Park, CA 94025-7015 (United States); Stanford University, Beckman Center B105, Stanford, CA 94305-5126 (United States); Matsugaki, Naohiro [High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan)

    2013-11-01

    A special liquid-nitrogen Dewar with double capacity for the sample-exchange robot has been created at AR-NE3A at the Photon Factory, allowing continuous fully automated data collection. In this work, this new system is described and the stability of its calibration is discussed. Photon Factory Automated Mounting system (PAM) protein crystal exchange systems are available at the following Photon Factory macromolecular beamlines: BL-1A, BL-5A, BL-17A, AR-NW12A and AR-NE3A. The beamline AR-NE3A has been constructed for high-throughput macromolecular crystallography and is dedicated to structure-based drug design. The PAM liquid-nitrogen Dewar can store a maximum of three SSRL cassettes. Therefore, users have to interrupt their experiments and replace the cassettes when using four or more of them during their beam time. As a result of investigation, four or more cassettes were used in AR-NE3A alone. For continuous automated data collection, the size of the liquid-nitrogen Dewar for the AR-NE3A PAM was increased, doubling the capacity. In order to check the calibration with the new Dewar and the cassette stand, calibration experiments were repeatedly performed. Compared with the current system, the parameters of the novel system are shown to be stable.

  16. An approach for model-based energy cost analysis of industrial automation systems

    Energy Technology Data Exchange (ETDEWEB)

    Beck, A.; Goehner, P. [Institute of Industrial Automation and Software Engineering, University of Stuttgart, Pfaffenwaldring 47, 70550 Stuttgart (Germany)

    2012-08-15

    Current energy reports confirm the steadily dilating gap between available conventional energy resources and future energy demand. This gap results in increasing energy costs and has become a determining factor in economies. Hence, politics, industry, and research focus either on regenerative energy resources or on energy-efficient concepts, methods, and technologies for energy-consuming devices. A remaining challenge is energy optimization of complex systems during their operation time. In addition to optimization measures that can be applied in development and engineering, the generation of optimization measures that are customized to the specific dynamic operational situation, promise high-cost saving potentials. During operation time, the systems are located in unique situations and environments and are operated according to individual requirements of their users. Hence, in addition to complexity of the systems, individuality and dynamic variability of their surroundings during operation time complicate identification of goal-oriented optimization measures. This contribution introduces a model-based approach for user-centric energy cost analysis of industrial automation systems. The approach allows automated generation and appliance of individual optimization proposals. Focus of this paper is on a basic variant for a single industrial automation system and its operational parameters.

  17. The Data Management System for the Shipboard Automated Meteorological and Oceanographic System (SAMOS) Initiative

    Science.gov (United States)

    Smith, S. R.; Arko, R. A.; Bourassa, M. A.; Hu, J.; McDonald, M.; Rettig, J.; Rolph, J.

    2009-12-01

    The data assembly center (DAC) for the SAMOS initiative has developed and implemented an automated data management system that collects, formats, quality controls, distributes, and archives near real-time surface marine data from research vessels. A SAMOS is a computerized data logging system that continuously records navigational (ship’s position, course, speed, and heading), meteorological (winds, air temperature, pressure, moisture, rainfall, and radiation), and near-surface oceanographic (sea temperature, salinity, conductivity, florescence) parameters while the vessel is at sea. The SAMOS initiative relies on the high-quality instrumentation purchased and deployed by the research vessel operators and does not provide instrumentation to the vessels. Currently, the SAMOS initiative receives measurements recorded at 1-min intervals and derived from higher frequency samples (on the order of 1 Hz). As of 2009, 21 research vessels provide routine SAMOS observations to the DAC. The data management system automatically tracks progress of the daily data acquisition and quality processing, stores metadata on instrumentation and ships, and provides data monitoring capability via a user-friendly web interface. An SQL database stores essential parameters to support tracking, data quality control, and version control for each file throughout the process. Presently, SAMOS data are acquired directly from research vessels at sea via a daily email transfer protocol. The steps of this NOAA funded protocol will be described along with lessons learned through the development process. A new DAC initiative, funded by NSF, to develop a 2nd SAMOS data acquisition protocol, via collaboration with the Rolling deck to Repository (R2R) project, will be outlined. The new protocol is envisioned to include transmission of the higher frequency meteorological and surface oceanic samples from participating vessels to real-time servers at R2R. The SAMOS DAC will access these samples for data

  18. Automated detection and enumeration of marine wildlife using unmanned aircraft systems (UAS) and thermal imagery

    Science.gov (United States)

    Seymour, A. C.; Dale, J.; Hammill, M.; Halpin, P. N.; Johnston, D. W.

    2017-01-01

    Estimating animal populations is critical for wildlife management. Aerial surveys are used for generating population estimates, but can be hampered by cost, logistical complexity, and human risk. Additionally, human counts of organisms in aerial imagery can be tedious and subjective. Automated approaches show promise, but can be constrained by long setup times and difficulty discriminating animals in aggregations. We combine unmanned aircraft systems (UAS), thermal imagery and computer vision to improve traditional wildlife survey methods. During spring 2015, we flew fixed-wing UAS equipped with thermal sensors, imaging two grey seal (Halichoerus grypus) breeding colonies in eastern Canada. Human analysts counted and classified individual seals in imagery manually. Concurrently, an automated classification and detection algorithm discriminated seals based upon temperature, size, and shape of thermal signatures. Automated counts were within 95–98% of human estimates; at Saddle Island, the model estimated 894 seals compared to analyst counts of 913, and at Hay Island estimated 2188 seals compared to analysts’ 2311. The algorithm improves upon shortcomings of computer vision by effectively recognizing seals in aggregations while keeping model setup time minimal. Our study illustrates how UAS, thermal imagery, and automated detection can be combined to efficiently collect population data critical to wildlife management. PMID:28338047

  19. Automated detection and enumeration of marine wildlife using unmanned aircraft systems (UAS) and thermal imagery

    Science.gov (United States)

    Seymour, A. C.; Dale, J.; Hammill, M.; Halpin, P. N.; Johnston, D. W.

    2017-03-01

    Estimating animal populations is critical for wildlife management. Aerial surveys are used for generating population estimates, but can be hampered by cost, logistical complexity, and human risk. Additionally, human counts of organisms in aerial imagery can be tedious and subjective. Automated approaches show promise, but can be constrained by long setup times and difficulty discriminating animals in aggregations. We combine unmanned aircraft systems (UAS), thermal imagery and computer vision to improve traditional wildlife survey methods. During spring 2015, we flew fixed-wing UAS equipped with thermal sensors, imaging two grey seal (Halichoerus grypus) breeding colonies in eastern Canada. Human analysts counted and classified individual seals in imagery manually. Concurrently, an automated classification and detection algorithm discriminated seals based upon temperature, size, and shape of thermal signatures. Automated counts were within 95–98% of human estimates; at Saddle Island, the model estimated 894 seals compared to analyst counts of 913, and at Hay Island estimated 2188 seals compared to analysts’ 2311. The algorithm improves upon shortcomings of computer vision by effectively recognizing seals in aggregations while keeping model setup time minimal. Our study illustrates how UAS, thermal imagery, and automated detection can be combined to efficiently collect population data critical to wildlife management.

  20. An automated two-phase system for hydrogel microbead production.

    Science.gov (United States)

    Coutinho, Daniela F; Ahari, Amir F; Kachouie, Nezamoddin N; Gomes, Manuela E; Neves, Nuno M; Reis, Rui L; Khademhosseini, Ali

    2012-09-01

    Polymeric beads have been used for protection and delivery of bioactive materials, such as drugs and cells, for different biomedical applications. Here, we present a generic two-phase system for the production of polymeric microbeads of gellan gum or alginate, based on a combination of in situ polymerization and phase separation. Polymer droplets, dispensed using a syringe pump, formed polymeric microbeads while passing through a hydrophobic phase. These were then crosslinked, and thus stabilized, in a hydrophilic phase as they crossed through the hydrophobic-hydrophilic interface. The system can be adapted to different applications by replacing the bioactive material and the hydrophobic and/or the hydrophilic phases. The size of the microbeads was dependent on the system parameters, such as needle size and solution flow rate. The size and morphology of the microbeads produced by the proposed system were uniform, when parameters were kept constant. This system was successfully used for generating polymeric microbeads with encapsulated fluorescent beads, cell suspensions and cell aggregates proving its ability for generating bioactive carriers that can potentially be used for drug delivery and cell therapy.

  1. Automation and Systems Issues in Air Traffic Control

    Directory of Open Access Journals (Sweden)

    Gabriela STROE

    2016-12-01

    Full Text Available This paper is dedicated to the study and analysis of a successfully designed control system in ATM. The aircraft's motion is affected by other factors, besides the pilot controls in the form of external disturbances, such as wind, and internal errors, due to unmodelled dynamics, tracking error and system noise. Navigation equipment tracks the exact real-time location of the aircraft in 4D space and provides feedback to both the pilot in the cockpit and ATC via ADS-B. ATM was expressed as a large, decentralized, dynamic, variable size, infinite horizon, multi-parameter, constrained, nonlinear, non-causal, non-convex, multi-objective, high-dimensionality, hybrid (continuous and combinatorial, optimal control problem. Rapidly increasing growth and demand in CNS/ATM, the advanced scheme for ATM, ADS-B system which is based on digital communication is being implemented in the field of surveillance. ADS-B is a radically new technology that is redefining the paradigm of CNS in ATM today. Automatic Dependent Surveillance-Broadcast (ADS-B is the next generation air surveillance system which supplants and complements the limitations of conventional radar, since conventional ATM radar systems will reach their limits soon due to the increases in air traffic.

  2. Trauma Pod: A Semi-Automated Robotic Surgery System

    Energy Technology Data Exchange (ETDEWEB)

    Noakes, Mark W [ORNL; Garcia, Pablo [SRI International; Rosen, Jacob [University of Washington; Kapoor, Chetan [University of Texas; Elbert, Greg [GDRS

    2009-01-01

    The Trauma Pod (TP) vision is to develop a rapidly deployable robotic system to perform critical acute stabilization and/or surgical procedures autonomously or in a teleoperative mode on wounded soldiers in the battlefield who might otherwise die before treatment in a combat hospital can be provided. In the first phase of a project pursuing this vision, a robotic TP system was developed and its capability demonstrated by performing select surgical procedures on a patient phantom. The system demonstrates the feasibility of performing acute stabilization procedures with the patient being the only human in the surgical cell. The teleoperated surgical robot is supported by autonomous arms that carry out scrub-nurse and circulating-nurse functions. Tool change and supply delivery are performed automatically and at least as fast as those performed manually by nurses. The TP system also includes tomographic X-ray facility for patient diagnosis and 2-D fluoroscopic data to support interventions. The vast amount of clinical protocols generated in the TP system are recorded automatically. These capabilities form the basis for a more comprehensive acute diagnostic and management platform that will provide life-saving care in environments where surgical personnel are not present.

  3. Fully automated dialysis system based on the central dialysis fluid delivery system.

    Science.gov (United States)

    Kawanishi, Hideki; Moriishi, Misaki; Sato, Takashi; Taoka, Masahiro

    2009-01-01

    The fully automated dialysis system (FADS) was developed as an improvement over previous patient monitors used in the treatment of hemodialysis, with the aim of standardizing and promoting labor-saving in such treatment. This system uses backfiltration dialysis fluid to perform priming, blood rinse back and rapid fluid replenishment, and causes guiding of blood into the dialyzer by the drainage pump for ultrafiltration. This requires that the dialysis fluid used be purified to a high level. The central dialysis fluid delivery system (CDDS) combines the process of the creation and supply of dialysis water and dialysis fluid to achieve a level of purity equivalent with ultrapure dialysis fluid. FADS has the further advantages of greater efficiency and streamlined operation, reducing human error and the risk of infection without requiring the storage or disposal of normal saline solution. The simplification of hemodialysis allows for greater frequency of dialysis or extended dialysis, enabling treatment to be provided in line with the patient's particular situation. FADS thus markedly improves the reliability, safety and standardization of dialysis procedures while ensuring labor-saving in these procedures, making it of particular utility for institutions dealing with dialysis on a large scale.

  4. DATA INTEGRITY IN THE AUTOMATED SYSTEM BASED ON LINEAR SYSTEMS HASHES

    Directory of Open Access Journals (Sweden)

    Savin S. V.

    2015-12-01

    Full Text Available To protect your data (data integrity in the automated systems, we provide a solution of the problem, which is to reduce redundancy control of information (hash codes, electronic signatures. We impose restrictions on the maximum number of violations of the integrity of the records in the data block. It is known, that with an increase in data protection the amount of control information (coefficient of redundancy also increases. We introduce the concept of linear systems of hash codes (LSHC. On the basis of the mathematical apparatus of the theory of systems of vectors we have developed an algorithm for constructing LSHC, which allows (for a given level of data protection, i.e. integrity to reduce the redundancy of the control information. Rules (principles of building LSHC comply with the rules of construction in coding theory (Hamming codes. The article provides an algorithm for data integrity in LSHC. The use of algorithms ensures the necessary level of data protection and the requirements specification of customers

  5. Function complex for automated system of coke machinery remote control

    Energy Technology Data Exchange (ETDEWEB)

    Simonov, N.F.; Pankrat' ev, O.N.; Bannikov, L.S.; Slatin, E.I.; Parfenov, G.I.

    1979-05-01

    this paper discusses a functional control system for remote control of coking plants introduced at the KBAiM of the Giprokoks. The control block allows for three modes of operation: fully automatic, by predesignated program according to oven design and technology; semi-automatic, in which individual programs perform automatically, checked and initiated by the operator; and remote, in which the operator controls each operation from the control console. The functions of selecting the location for the coke machinery, signal transmission and control selection have been incorporated as three autonomous but interfacing systems. (In Russian)

  6. Automated Voxel Model from Point Clouds for Structural Analysis of Cultural Heritage

    Science.gov (United States)

    Bitelli, G.; Castellazzi, G.; D'Altri, A. M.; De Miranda, S.; Lambertini, A.; Selvaggi, I.

    2016-06-01

    In the context of cultural heritage, an accurate and comprehensive digital survey of a historical building is today essential in order to measure its geometry in detail for documentation or restoration purposes, for supporting special studies regarding materials and constructive characteristics, and finally for structural analysis. Some proven geomatic techniques, such as photogrammetry and terrestrial laser scanning, are increasingly used to survey buildings with different complexity and dimensions; one typical product is in form of point clouds. We developed a semi-automatic procedure to convert point clouds, acquired from laserscan or digital photogrammetry, to a filled volume model of the whole structure. The filled volume model, in a voxel format, can be useful for further analysis and also for the generation of a Finite Element Model (FEM) of the surveyed building. In this paper a new approach is presented with the aim to decrease operator intervention in the workflow and obtain a better description of the structure. In order to achieve this result a voxel model with variable resolution is produced. Different parameters are compared and different steps of the procedure are tested and validated in the case study of the North tower of the San Felice sul Panaro Fortress, a monumental historical building located in San Felice sul Panaro (Modena, Italy) that was hit by an earthquake in 2012.

  7. A system-awareness decision classifier to automated MSN forensics

    Science.gov (United States)

    Chu, Yin-Teshou Tsao; Fan, Kuo-Pao; Cheng, Ya-Wen; Tseng, Po-Kai; Chen, Huan; Cheng, Bo-Chao

    2007-09-01

    Data collection is the most important stage in network forensics; but under the resource constrained situations, a good evidence collection mechanism is required to provide effective event collections in a high network traffic environment. In literatures, a few network forensic tools offer MSN-messenger behavior reconstruction. Moreover, they do not have classification strategies at the collection stage when the system becomes saturated. The emphasis of this paper is to address the shortcomings of the above situations and pose a solution to select a better classification in order to ensure the integrity of the evidences in the collection stage under high-traffic network environments. A system-awareness decision classifier (SADC) mechanism is proposed in this paper. MSN-shot sensor is able to adjust the amount of data to be collected according to the current system status and to keep evidence integrity as much as possible according to the file format and the current system status. Analytical results show that proposed SADC to implement selective collection (SC) consumes less cost than full collection (FC) under heavy traffic scenarios. With the deployment of the proposed SADC mechanism, we believe that MSN-shot is able to reconstruct the MSN-messenger behaviors perfectly in the context of upcoming next generation network.

  8. AN AUTOMATED NETWORK SECURITYCHECKING AND ALERT SYSTEM: A NEW FRAMEWORK

    Directory of Open Access Journals (Sweden)

    Vivek Kumar Yadav

    2013-09-01

    Full Text Available Network security checking is a vital process to assess and to identify weaknesses in network for management of security. Insecure entry points of a network provide attackers an easy target to access and compromise. Open ports of network components such as firewalls, gateways and end systems are analogues to open gates of a building through which any one can get into. Network scanning is performed to identify insecure entry points in the network components. To find out vulnerabilities on these points vulnerability assessment is performed. So security checking consists of both activities- network scanning as well as vulnerability assessment. A single tool used for the security checking may not give reliable results. This paper presents a framework for assessing the security of a network using multiple Network Scanning and Vulnerability Assessment tools. The proposed framework is an extension of the framework given by Jun Yoon and Wontae Sim [1] which performs vulnerability scanning only. The framework presented here adds network scanning, alerting and reporting system to their framework. Network scanning and vulnerability tools together complement each other and make it amenable for centralized control and management. The reporting system of framework sends an email to the network administrator which contains detailed report (as attachment of security checking process. Alerting system sends a SMS message as an alert to the network administrator in case of severe threats found in the network. Initial results of the framework are encouraging and further work is in progress.

  9. Towards Verification of Constituent Systems through Automated Proof

    DEFF Research Database (Denmark)

    Couto, Luis Diogo Monteiro Duarte; Foster, Simon; Payne, R

    2014-01-01

    to specify contractual obligations on the constituent systems of a SoS. To support verification of these obligations we have developed a proof obligation generator and theorem prover plugin for Symphony. The latter uses the Isabelle/HOL theorem prover to automatically discharge the proof obligations arising...

  10. Automated Dental Epidemiology System. I. Preliminary Investigation and Literature Review,

    Science.gov (United States)

    1983-03-01

    system supported dental service to a 403,000 person, relatively stable population. Per-person oral health and orthodontic indices were developed, and...to $25,000 recurring expenses, depending on specific data processing techniques selected. Probable recurrent cost for the additional personnel

  11. Automated Fault Localization for Service-Oriented Software Systems

    NARCIS (Netherlands)

    Chen, C.

    2015-01-01

    In this thesis, we have focused on applying Spectrum-based Fault Localization (SFL) to diagnose Service-Oriented Systems at runtime. We reused a framework-based online monitoring technique to obtain the service transaction information. We devised a three-phased oracle and combined this with monitori

  12. AUTOMATED FLOWCHART SYSTEM FROM TEXAS A&M UNIVERSITY

    Science.gov (United States)

    Woodford, W.

    1994-01-01

    An accurate flowchart is an important part of the documentation for any computer program. The flowchart offers the user an easy to follow overview of program operation and the maintenance programmer an effective debugging tool. The TAMU FLOWCHART System was developed to flowchart any program written in the FORTRAN language. It generates a line printer flowchart which is representative of the program logic. This flowchart provides the user with a detailed representation of the program action taken as each program statement is executed. The TAMU FLOWCHART System should prove to be a valuable aid to groups working with complex FORTRAN programs. Each statement in the program is displayed within a symbol which represents the program action during processing of the enclosed statement. Symbols available include: subroutine, function, and entry statements; arithmetic statements; input and output statements; arithmetical and logical IF statements; subroutine calls with or without argument list returns; computed and assigned GO TO statements; DO statements; STOP and RETURN statements; and CONTINUE and ASSIGN statements. Comment cards within the source program may be suppressed or displayed and associated with a succeeding source statement. Each symbol is annotated with a label (if present in the source code), a block number, and the statement sequence number. Program flow and options within the program are represented by line segments and direction indicators connecting symbols. The TAMU FLOWCHART System should be able to accurately flowchart any working FORTRAN program. This program is written in COBOL for batch execution and has been implemented on an IBM 370 series computer with an OS operating system and with a central memory requirement of approximately 380K of 8 bit bytes. The TAMU FLOWCHART System was developed in 1977.

  13. COST-WORTH ASSESSMENT OF AUTOMATED RADIAL DISTRIBUTION SYSTEM BASED ON RELIABILITY

    Directory of Open Access Journals (Sweden)

    E. Vidya Sagar

    2010-11-01

    Full Text Available Power reliability and quality are gaining their greater grounds than ever in the power and industrial market of the times. It has become an essential means for the successful dispatch of quality product, operation, services of any industry. The reliability of power distribution network can be greatly enhanced by the automation of its feeder system and other associated parts. Remotely controlled and automated restoration services can avoid the necessity of executing manual switching schedules and are bound to bring about remarkable levels of system reliability and interruption costs. The reliability cost-worth analysis is the excellent tool for evaluation of interruption costs. Reliability cost-worth analysis is very significant in the power system planning, operation, maintenance andexpansion, for it takes into account the customer concerns in the analysis. This paper deals in due detail with the reliability based cost-worth analysis of automated radial distribution network. The direct method of assessing the worth of reliability is to calculate the user costs relevant to interruptions in the power supply. By the application of failure mode effect analysis and cost-worth analysis byusing direct costing method the reliability of radial distribution network can be evaluated. The customer interruption costs’ indices of a radial distribution network calculated using the analytical method applied to an Indian utility network system with 2000KVA& sixteen nodes and the related results of the study are duly discussed in this paper.

  14. High sensitivity automated multiplexed immunoassays using photonic crystal enhanced fluorescence microfluidic system.

    Science.gov (United States)

    Tan, Yafang; Tang, Tiantian; Xu, Haisheng; Zhu, Chenqi; Cunningham, Brian T

    2015-11-15

    We demonstrate a platform that integrates photonic crystal enhanced fluorescence (PCEF) detection of a surface-based microspot fluorescent assay with a microfluidic cartridge to achieve simultaneous goals of high analytic sensitivity (single digit pg/mL), high selectivity, low sample volume, and assay automation. The PC surface, designed to provide optical resonances for the excitation wavelength and emission wavelength of Cyanines 5 (Cy5), was used to amplify the fluorescence signal intensity measured from a multiplexed biomarker microarray. The assay system is comprised of a plastic microfluidic cartridge for holding the PC and an assay automation system that provides a leak-free fluid interface during introduction of a sequence of fluids under computer control. Through the use of the assay automation system and the PC embedded within the microfluidic cartridge, we demonstrate pg/mL-level limits of detection by performing representative biomarker assays for interleukin 3 (IL3) and Tumor Necrosis Factor (TNF-α). The results are consistent with limits of detection achieved without the use of the microfluidic device with the exception that coefficients of variability from spot-to-spot are substantially lower than those obtained by performing assays with manual manipulation of assay liquids. The system's capabilities are compatible with the goal of diagnostic instruments for point-of-care settings.

  15. Molecular Detection of Bladder Cancer by Fluorescence Microsatellite Analysis and an Automated Genetic Analyzing System

    Directory of Open Access Journals (Sweden)

    Sarel Halachmi

    2007-01-01

    Full Text Available To investigate the ability of an automated fluorescent analyzing system to detect microsatellite alterations, in patients with bladder cancer. We investigated 11 with pathology proven bladder Transitional Cell Carcinoma (TCC for microsatellite alterations in blood, urine, and tumor biopsies. DNA was prepared by standard methods from blood, urine and resected tumor specimens, and was used for microsatellite analysis. After the primers were fluorescent labeled, amplification of the DNA was performed with PCR. The PCR products were placed into the automated genetic analyser (ABI Prism 310, Perkin Elmer, USA and were subjected to fluorescent scanning with argon ion laser beams. The fluorescent signal intensity measured by the genetic analyzer measured the product size in terms of base pairs. We found loss of heterozygocity (LOH or microsatellite alterations (a loss or gain of nucleotides, which alter the original normal locus size in all the patients by using fluorescent microsatellite analysis and an automated analyzing system. In each case the genetic changes found in urine samples were identical to those found in the resected tumor sample. The studies demonstrated the ability to detect bladder tumor non-invasively by fluorescent microsatellite analysis of urine samples. Our study supports the worldwide trend for the search of non-invasive methods to detect bladder cancer. We have overcome major obstacles that prevented the clinical use of an experimental system. With our new tested system microsatellite analysis can be done cheaper, faster, easier and with higher scientific accuracy.

  16. THE AUTOMATED SYSTEM OF RADIATION EXPOSURE CONTROL (ASCRE FOR ROSPOTREBNADZOR: CREATION HISTORY, APPLICABILITY AND DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    L. V. Repin

    2014-01-01

    Full Text Available The article describes the automated system of radiation exposure control (ASCRE for Rospotrebnadzor developed  in  the  framework  of  the  Federal  target  program  "Nuclear  and  Radiation  Safety  in  2008  and  for  the period till 2015". The history of the development of this system is given. It is shown the diagram of the functioning of ASCRE, description of the individual blocks of diagram is given. It is shown that the grpouping of the data from various Federal banks in the single automated information-analytical system on the general address basis with the wide possibilities of analytical tools application will greatly expand the range of the issues for the assessment of radiation impact on the population than in the existing systems. The use of automation resources will reduce the time for obtaining the necessary information and, ultimately, will increase the effectiveness of the decision making in the field of radiation protection.

  17. IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment

    CERN Document Server

    Locci, F

    2014-01-01

    In CERN accelerators control system several components are essential such as: Programmable Logic Controller (PLC), PCI Extensions for Instrumentation (PXI), and other micro-controller families. Together with their weaknesses and their strength points they typically present custom communication protocols and it is therefore difficult to federate them into the control system using a single communication strategy. Furthermore this dependency to the physical device interfaces and protocols makes most of the code not reusable and the replacement of old technology a difficult problem. The purpose of IEPLC ([1]) is to mitigate the communication issues given by this heterogeneity; it proposes a framework to define communication interfaces in a hardware independent manner. In addition it automatically generates all the resources needed on master side (typically represented by a FEC: Front-End Computer) and slave side (typically represented by the controller) to implement a common and generic Ethernet communication. Th...

  18. The Consolidated Automated Support System (CASS): A Comparative Evaluation

    Science.gov (United States)

    1990-06-01

    Example Data for Computing Average Availabilty (A.,g) .............. 90 X. 1987 Cost-Benefit Analysis of Procurement of CASS versus AFOT ...... 94 XI...function, station usage , operator identification, and the results of UUT testing. [Ref. 191 The Operational Management System (OMS) aids I level...69)1 = .72. (.002 * 3) + (.005 * 2) + (.003 * 3) 89 Table IX. Example Data for Computing Average Availabilty (A.,,) UUT Sta A Sta B Sta C Sta D 1

  19. 3D vision system for intelligent milking robot automation

    Science.gov (United States)

    Akhloufi, M. A.

    2013-12-01

    In a milking robot, the correct localization and positioning of milking teat cups is of very high importance. The milking robots technology has not changed since a decade and is based primarily on laser profiles for teats approximate positions estimation. This technology has reached its limit and does not allow optimal positioning of the milking cups. Also, in the presence of occlusions, the milking robot fails to milk the cow. These problems, have economic consequences for producers and animal health (e.g. development of mastitis). To overcome the limitations of current robots, we have developed a new system based on 3D vision, capable of efficiently positioning the milking cups. A prototype of an intelligent robot system based on 3D vision for real-time positioning of a milking robot has been built and tested under various conditions on a synthetic udder model (in static and moving scenarios). Experimental tests, were performed using 3D Time-Of-Flight (TOF) and RGBD cameras. The proposed algorithms permit the online segmentation of teats by combing 2D and 3D visual information. The obtained results permit the teat 3D position computation. This information is then sent to the milking robot for teat cups positioning. The vision system has a real-time performance and monitors the optimal positioning of the cups even in the presence of motion. The obtained results, with both TOF and RGBD cameras, show the good performance of the proposed system. The best performance was obtained with RGBD cameras. This latter technology will be used in future real life experimental tests.

  20. Automated Headcount Systems. A State of the Art Survey

    Science.gov (United States)

    1980-06-01

    center. It was the feeling of the users at New Hampshire that the equipment was sensitive enough so that if located in any other place, reliability...Brooks Air Force Base San Antonio, TX 78235 1 HQ AFMSC/ SGB (Col Jackson) Brooks AFB, TX 78235 1 HQDA DCSLOG ATTN: DALO-TST-F Washington, DC...stripe. Your system can be programmed to control access to sensitive production, engineering, research and development, office and EDP areas. You

  1. ASPHERICAL SURFACES APPROXIMATION IN AUTOMATED DESIGN OF OPTICAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    T. V. Ivanova

    2015-07-01

    Full Text Available Subject of Research. The paper deals with the problems of higher order aspherical surfaces approximation using different equation types. The objects of research are two types of equations for higher order aspherical surfaces description used in different software for optical systems design (SАRО, OPAL, ZEMAX, CODE-V, etc. and dependent on z-coordinate or on a radial coordinate on the surface. Conversion from one type of equations to another is considered in view of application in different software for optical systems design. Methods. The subject matter of the method lies in usage of mean square method approximation for recalculation of high-order aspherical surface. Iterative algorithm for recalculation is presented giving the possibility to recalculate coefficients for different types of equations with required accuracy. Recommendations are given for choosing recalculation parameters such as the number of result equation coefficients, the number of points for recalculation and point allocation on a surface. Main Results. Example of recalculation for aspherical surface and accuracy estimation, including result aberration comparison between initial surface and recalculated surface are presented. The example has shown that required accuracy of surface representation was obtained. Practical Relevance. This technique is usable for recalculation of higher order aspherical surfaces in various types of software for optical systems design and also for research of optimal higher order aspherical surfaces description.

  2. Automated Derivation of Complex System Constraints from User Requirements

    Science.gov (United States)

    Foshee, Mark; Murey, Kim; Marsh, Angela

    2010-01-01

    The Payload Operations Integration Center (POIC) located at the Marshall Space Flight Center has the responsibility of integrating US payload science requirements for the International Space Station (ISS). All payload operations must request ISS system resources so that the resource usage will be included in the ISS on-board execution timelines. The scheduling of resources and building of the timeline is performed using the Consolidated Planning System (CPS). The ISS resources are quite complex due to the large number of components that must be accounted for. The planners at the POIC simplify the process for Payload Developers (PD) by providing the PDs with a application that has the basic functionality PDs need as well as list of simplified resources in the User Requirements Collection (URC) application. The planners maintained a mapping of the URC resources to the CPS resources. The process of manually converting PD's science requirements from a simplified representation to a more complex CPS representation is a time-consuming and tedious process. The goal is to provide a software solution to allow the planners to build a mapping of the complex CPS constraints to the basic URC constraints and automatically convert the PD's requirements into systems requirements during export to CPS.

  3. Systems Biology for Organotypic Cell Cultures

    Energy Technology Data Exchange (ETDEWEB)

    Grego, Sonia [RTI International, Research Triangle Park, NC (United States); Dougherty, Edward R. [Texas A & M Univ., College Station, TX (United States); Alexander, Francis J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Auerbach, Scott S. [National Inst. of Environmental Health Sciences, Research Triangle Park, NC (United States); Berridge, Brian R. [GlaxoSmithKline, Research Triangle Park, NC (United States); Bittner, Michael L. [Translational Genomics Research Inst., Phoenix, AZ (United States); Casey, Warren [National Inst. of Environmental Health Sciences, Research Triangle Park, NC (United States); Cooley, Philip C. [RTI International, Research Triangle Park, NC (United States); Dash, Ajit [HemoShear Therapeutics, Charlottesville, VA (United States); Ferguson, Stephen S. [National Inst. of Environmental Health Sciences, Research Triangle Park, NC (United States); Fennell, Timothy R. [RTI International, Research Triangle Park, NC (United States); Hawkins, Brian T. [RTI International, Research Triangle Park, NC (United States); Hickey, Anthony J. [RTI International, Research Triangle Park, NC (United States); Kleensang, Andre [Johns Hopkins Univ., Baltimore, MD (United States). Center for Alternatives to Animal Testing; Liebman, Michael N. [IPQ Analytics, Kennett Square, PA (United States); Martin, Florian [Phillip Morris International, Neuchatel (Switzerland); Maull, Elizabeth A. [National Inst. of Environmental Health Sciences, Research Triangle Park, NC (United States); Paragas, Jason [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Qiao, Guilin [Defense Threat Reduction Agency, Ft. Belvoir, VA (United States); Ramaiahgari, Sreenivasa [National Inst. of Environmental Health Sciences, Research Triangle Park, NC (United States); Sumner, Susan J. [RTI International, Research Triangle Park, NC (United States); Yoon, Miyoung [The Hamner Inst. for Health Sciences, Research Triangle Park, NC (United States); ScitoVation, Research Triangle Park, NC (United States)

    2016-08-04

    Translating in vitro biological data into actionable information related to human health holds the potential to improve disease treatment and risk assessment of chemical exposures. While genomics has identified regulatory pathways at the cellular level, translation to the organism level requires a multiscale approach accounting for intra-cellular regulation, inter-cellular interaction, and tissue/organ-level effects. Tissue-level effects can now be probed in vitro thanks to recently developed systems of three-dimensional (3D), multicellular, “organotypic” cell cultures, which mimic functional responses of living tissue. However, there remains a knowledge gap regarding interactions across different biological scales, complicating accurate prediction of health outcomes from molecular/genomic data and tissue responses. Systems biology aims at mathematical modeling of complex, non-linear biological systems. We propose to apply a systems biology approach to achieve a computational representation of tissue-level physiological responses by integrating empirical data derived from organotypic culture systems with computational models of intracellular pathways to better predict human responses. Successful implementation of this integrated approach will provide a powerful tool for faster, more accurate and cost-effective screening of potential toxicants and therapeutics. On September 11, 2015, an interdisciplinary group of scientists, engineers, and clinicians gathered for a workshop in Research Triangle Park, North Carolina, to discuss this ambitious goal. Participants represented laboratory-based and computational modeling approaches to pharmacology and toxicology, as well as the pharmaceutical industry, government, non-profits, and academia. Discussions focused on identifying critical system perturbations to model, the computational tools required, and the experimental approaches best suited to generating key data. This consensus report summarizes the discussions held.

  4. Development of automated information system for domestic waste logistics management (by the example of Apatity town

    Directory of Open Access Journals (Sweden)

    Ladik A. S.

    2016-03-01

    Full Text Available A software system for management information support of domestic waste logistics (by the example of Apatity town has been developed for management information support efficiency enhancement of domestic waste collection and transportation processes in the municipal systems subject to hygiene and sanitary norms and standards. The system is implemented as an interactive multilogic web-service. The system provides computational procedure execution of financial expenditure and ecological damage in the issue of domestic waste collection and transportation and environmental risk minimization on the basis of proposed algorithms for automated synthesis of adaptive journey routes in comparison with existing prototypes

  5. Digital Coal Mine Integrated Automation System Based on ControlNet

    Institute of Scientific and Technical Information of China (English)

    CHEN Jin-yun; ZHANG Shen; ZUO Wei-ran

    2007-01-01

    A three-layer model for digital communication in a mine is proposed. Two basic platforms are discussed: A uniform transmission network and a uniform data warehouse. An actual, ControlNet based, transmission network platform suitable for the Jining No.3 coal mine is presented. This network is an information superhighway intended to integrate all existing and new automation subsystems. Its standard interface can be used with future subsystems. The network, data structure and management decision-making all employ this uniform hardware and software. This effectively avoids the problems of system and information islands seen in traditional mine-automation systems. The construction of the network provides a stable foundation for digital communication in the Jining No.3 coal mine.

  6. Automated system of measuring the temperature dependence of the electrical conductivity and the thermal emf

    Energy Technology Data Exchange (ETDEWEB)

    Listovnichii, V.E.; Fenyuk, P.F.; Batalin, V.G.; Brodskii, V.P.; Bulanova, M.V.; Dragan, T.E.; Yatsenko, V.A.

    1987-10-01

    The automated measurement system the authors developed for the temperature dependence of the electrical conductivity and the thermal emf - MERA - permits automatic control of the course of the experiment on several specimens simultaneously in one cycle, including the programmed change in specimen temperature, collection, primary and statistical test data processing, and mapping of the information in a given volume on different carriers. The MERA automated system is used to construct composition-properties diagrams and for the physicochemical analysis of transition and rare-earth metal alloys. Its application permits a sharp increase in the volume of test data being processed and a more-than-two-orders increase in the rate of measurement, and their realization in a dynamic mode for satisfactory statistical test-data characteristics.

  7. Detection of virus-specific intrathecally synthesised immunoglobulin G with a fully automated enzyme immunoassay system

    Directory of Open Access Journals (Sweden)

    Weissbrich Benedikt

    2007-05-01

    Full Text Available Abstract Background The determination of virus-specific immunoglobulin G (IgG antibodies in cerebrospinal fluid (CSF is useful for the diagnosis of virus associated diseases of the central nervous system (CNS and for the detection of a polyspecific intrathecal immune response in patients with multiple sclerosis. Quantification of virus-specific IgG in the CSF is frequently performed by calculation of a virus-specific antibody index (AI. Determination of the AI is a demanding and labour-intensive technique and therefore automation is desirable. We evaluated the precision and the diagnostic value of a fully automated enzyme immunoassay for the detection of virus-specific IgG in serum and CSF using the analyser BEP2000 (Dade Behring. Methods The AI for measles, rubella, varicella-zoster, and herpes simplex virus IgG was determined from pairs of serum and CSF samples of patients with viral CNS infections, multiple sclerosis and of control patients. CSF and serum samples were tested simultaneously with reference to a standard curve. Starting dilutions were 1:6 and 1:36 for CSF and 1:1386 and 1:8316 for serum samples. Results The interassay coefficient of variation was below 10% for all parameters tested. There was good agreement between AIs obtained with the BEP2000 and AIs derived from the semi-automated reference method. Conclusion Determination of virus-specific IgG in serum-CSF-pairs for calculation of AI has been successfully automated on the BEP2000. Current limitations of the assay layout imposed by the analyser software should be solved in future versions to offer more convenience in comparison to manual or semi-automated methods.

  8. Automated Grading System for Evaluation of Corneal Superficial Punctate Keratitis Associated with Dry Eye.

    Science.gov (United States)

    Rodriguez, John D; Lane, Keith; Ousler, George W; Angjeli, Endri; Smith, Lisa; Abelson, Mark

    2015-03-03

    Purpose. To develop an automated method of grading fluorescein staining that accurately reproduces the clinical grading system currently in use. Methods. From the slit lamp photograph of the fluorescein-stained cornea, the region of interest was selected and punctate dot number calculated using software developed with the Opencv computer vision library. Images (N=229) were then divided into six incremental severity categories based on computed scores. The final selection of fifty-four photographs represented the full range of scores: nine images from each of six categories. These were then evaluated by three investigators using a clinical 0-4 corneal staining scale. Pearson correlations were calculated to compare investigator scores, and mean investigator and automated scores. Lin's Concordance Correlations (CCC) and Bland Altman plots were used to assess agreement between methods and between investigators. Results. Pearson's correlation between investigators was 0.914; mean CCC between investigators was 0.882. Bland-Altman analysis indicated that scores assessed by Investigator 3 were significantly higher than those of Investigators 1 and 2 (paired t-test). The predicted grade was calculated to be: Gpred=1.48log(Ndots) - 0.206. The two-point Pearson's correlation coefficient between the methods was 0.927 (p<0.0001). CCC between predicted automated score Gpred and mean investigator score was 0.929, 95% C.I. (0.884, 0.957). Bland-Altman analysis did not indicate bias. The difference in standard deviation between clinical and automated methods was 0.398. Conclusion. An objective, automated analysis of corneal staining provides a quality assurance tool to be used to substantiate clinical grading of key corneal staining endpoints in multi-centered clinical trials of dry eye.

  9. MLP based Reusability Assessment Automation Model for Java based Software Systems

    Directory of Open Access Journals (Sweden)

    Surbhi Maggo

    2014-08-01

    Full Text Available Reuse refers to a common principle of using existing resources repeatedly, that is pervasively applicable everywhere. In software engineering reuse refers to the development of software systems using already available artifacts or assets partially or completely, with or without modifications. Software reuse not only promises significant improvements in productivity and quality but also provides for the development of more reliable, cost effective, dependable and less buggy (considering that prior use and testing have removed errors software with reduced time and effort. In this paper we present an efficient and reliable automation model for reusability evaluation of procedure based object oriented software for predicting the reusability levels of the components as low, medium or high. The presented model follows a reusability metric framework that targets the requisite reusability attributes including maintainability (using the Maintainability Index for functional analysis of the components. Further Multilayer perceptron (using back propagation based neural network is applied for the establishment of significant relationships among these attributes for reusability prediction. The proposed approach provides support for reusability evaluation at functional level rather than at structural level. The automation support for this approach is provided in the form of a tool named JRA2M2 (Java based Reusability Assessment Automation Model using Multilayer Perceptron (MLP, implemented in Java. The performance of JRA2M2 is recorded using parameters like accuracy, classification error, precision and recall. The results generated using JRA2M2 indicate that the proposed automation tool can be effectively used as a reliable and efficient solution for automated evaluation of reusability.

  10. Automated spoken dialogue system for hypertensive patient home management.

    Science.gov (United States)

    Giorgino, Toni; Azzini, Ivano; Rognoni, Carla; Quaglini, Silvana; Stefanelli, Mario; Gretter, Roberto; Falavigna, Daniele

    2005-03-01

    Recent advances in automatic speech recognition and related technologies allow computers to carry on conversations by telephone. We developed an intelligent dialogue system that interacts with hypertensive patients to collect data about their health status. Patients thus avoid the inconvenience of traveling for frequent face to face visits to monitor the clinical variables they can easily measure at home; the physician is facilitated in acquiring patient information and cardiovascular risk, which is evaluated from the data according to noted guidelines. Controlled trials to assess the clinical efficacy are under way.

  11. System for trading and automation activities in Ogame

    OpenAIRE

    Čarek, Jiří

    2014-01-01

    The goal is to create automatized system for playing online game in order to help player. The major goal of this thesis is to create a program for playing online game Ogame(Gameforge 2015k), in order to remove from game repeated and boring operations, which allows player to be concentrated on game strategy, diplomacy and the need of being online in game. The concept of the program will be changed during development according to current requirements of operations. We used such programming lang...

  12. Automated fenestration allocation as complying with LEED rating system

    Directory of Open Access Journals (Sweden)

    Hazem Mohamed Talaat El Daly

    2014-12-01

    The allocation of windows, through the help of certain well known heuristic algorithms and simulation programs, could be reached automatically to compromise with the LEED rating system by achieving the required daylight amounts with a minimum solar radiation inside a particular building. This research shows a design method based on simulation techniques with the help of heuristic algorithms through a parametric design that automatically allocate windows to comply with LEED. At the end of the research, a small project is discussed for evaluating the design process.

  13. Intelligent Adaptive Systems: Literature Research of Design Guidance for Intelligent Adaptive Automation and Interfaces

    Science.gov (United States)

    2007-09-01

    fighting, process control). Harris , Goernert, Hancock and Arthur (1994) looked at the comparative effectiveness of machine-initiated automation and...operator? e. How will operators interact with the system for maximal benefit? Reference: Alpert , S. R., Karat, J., Karat...and Medicine Panel (HFM) Symposium held in Warsaw, Poland, 7-9 October 2002. Alpert , S. R., Karat, J., Karat, C. M., Brodie C., and Vergo, J. G

  14. Automated system of control and diagnostics of cast-steel defects in the mass production

    Science.gov (United States)

    Knyazev, S. V.; Usoltsev, A. A.; Skopich, D. V.; Fatyanova, E. A.; Dolgopolov, A. E.

    2016-09-01

    To solve the problem of efficient control over technological process in the foundry the mathematical model is required, that would connect the the input and output parameters of the object. To collect the data on cast-steels defects an automated system was developed that greatly simplifies the process of technical control and allows the problem of process parameters optimization to be solved using the criterion of defects minimization in the cast- steels.

  15. The Social and Behavioral Impacts of Information Systems in the Automated Office: A Literature Review

    Science.gov (United States)

    1991-12-01

    Computers in Human Behavior Computers and People 3. Thesis Restrictions It is the purpose of this paper to bring about a better understanding...34, Computers in Human Behavior , Vol. 3, No. 3, pp. 167-179, 1987 Murljacic, T., "The Evolution of Automated Office Systems", Infosystems, Vol. 34 , p.48...Between Computers and Psychology: Towards a Psychology of Computerization", Computers in Human Behavior , Vol. 3, No. 3, pp. 167-179, 1987

  16. Automated Metadata in Multimedia Information Systems Creation, Refinement, Use in Surrogates, and Evaluation

    CERN Document Server

    Christel, Michael

    2009-01-01

    Improvements in network bandwidth along with dramatic drops in digital storage and processing costs have resulted in the explosive growth of multimedia (combinations of text, image, audio, and video) resources on the Internet and in digital repositories. A suite of computer technologies delivering speech, image, and natural language understanding can automatically derive descriptive metadata for such resources. Difficulties for end users ensue, however, with the tremendous volume and varying quality of automated metadata for multimedia information systems. This lecture surveys automatic metada

  17. AUTOMATED SYSTEM OF DATA PROCESSING WITH THE IMPLEMENTATION OF RATING TECHNOLOGY OF TEACHING

    Directory of Open Access Journals (Sweden)

    О. И. Дзювина

    2014-01-01

    Full Text Available Rating technology of teaching enables independent and individual work of students, increase their motivation.Purpose: to increase the efficiency of data processing with the implementation of rating technology of teaching.Method: analysis, synthesis,experiment.Results. Developed an automated data processing system for the implementation of rating technology of teaching.Practical implication. Education.Purchase on Elibrary.ru > Buy now

  18. Dataspace: an automated visualization system for large databases

    Science.gov (United States)

    Petajan, Eric D.; Jean, Yves D.; Lieuwen, Dan; Anupam, Vinod

    1997-04-01

    DataSpace is a multi-platform software system for easily visualizing relational databases using a set of flexible 3D graphics tools. Typically, five attributes are selected for a given visualization session where two of the attributes are used to generate 2D plots and the other three attributes are used to position the 2D plots in a regular 3D lattice. Mouse-based 3D navigation with constraints allows the user to see the 'forest and the trees' without getting 'lost in space'. DataSpace uses the Standard Query Language to allow connection popular database systems. DataSpace also incorporates a variety of additional tools e.g., aggregation, data 'drill down', multidimensional scaling, variable transparency, query by example, and display of graphics from external applications. Labeling of node contents is automatic. 3D strokefonts are used to provide readable yet scalable text in a 3D environment. Since interactive 3D navigation is essential to DataSpace, we have incorporated several methods for adaptively reducing graphical detail without losing information when the host machine is overloaded. DataSpace has been sued to visualized databases containing over 1 million records with interactive performance. In particular, large databases containing stock price information and telecommunications customer profiles have been analyzed using DataSpace.

  19. KNOWLEDGE-BASED ROBOT VISION SYSTEM FOR AUTOMATED PART HANDLING

    Directory of Open Access Journals (Sweden)

    J. Wang

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This paper discusses an algorithm incorporating a knowledge-based vision system into an industrial robot system for handling parts intelligently. A continuous fuzzy controller was employed to extract boundary information in a computationally efficient way. The developed algorithm for on-line part recognition using fuzzy logic is shown to be an effective solution to extract the geometric features of objects. The proposed edge vector representation method provides enough geometric information and facilitates the object geometric reconstruction for gripping planning. Furthermore, a part-handling model was created by extracting the grasp features from the geometric features.

    AFRIKAANSE OPSOMMING: Hierdie artikel beskryf ‘n kennis-gebaseerde visiesisteemalgoritme wat in ’n industriёle robotsisteem ingesluit word om sodoende intelligente komponenthantering te bewerkstellig. ’n Kontinue wasige beheerder is gebruik om allerlei objekinligting deur middel van ’n effektiewe berekeningsmetode te bepaal. Die ontwikkelde algoritme vir aan-lyn komponentherkenning maak gebruik van wasige logika en word bewys as ’n effektiewe metode om geometriese inligting van objekte te bepaal. Die voorgestelde grensvektormetode verskaf voldoende inligting en maak geometriese rekonstruksie van die objek moontlik om greepbeplanning te kan doen. Voorts is ’n komponenthanteringsmodel ontwikkel deur die grypkenmerke af te lei uit die geometriese eienskappe.

  20. Automated Lab-on-a-Chip Electrophoresis System

    Science.gov (United States)

    Willis, Peter A.; Mora, Maria; Greer, Harold F.; Fisher, Anita M.; Bryant, Sherrisse

    2012-01-01

    Capillary electrophoresis is an analytical technique that can be used to detect and quantify extremely small amounts of various biological molecules. In the search for biochemical traces of life on other planets, part of this search involves an examination of amino acids, which are the building blocks of life on Earth. The most sensitive method for detecting amino acids is the use of laser induced fluorescence. However, since amino acids do not, in general, fluoresce, they first must be reacted with a fluorescent dye label prior to analysis. After this process is completed, the liquid sample then must be transported into the electrophoresis system. If the system is to be reused multiple times, samples must be added and removed each time. In typical laboratories, this process is performed manually by skilled human operators using standard laboratory equipment. This level of human intervention is not possible if this technology is to be implemented on extraterrestrial targets. Microchip capillary electrophoresis (CE) combined with laser induced fluorescence detection (LIF) was selected as an extremely sensitive method to detect amino acids and other compounds that can be tagged with a fluorescent dye. It is highly desirable to package this technology into an integrated, autonomous, in situ instrument capable of performing CE-LIF on the surface of an extraterrestrial body. However, to be fully autonomous, the CE device must be able to perform a large number of sample preparation and analysis operations without the direct intervention of a human.