Defense Logistics: Improved Data and Information Sharing Could Aid in DOD’s Management of Ammunition Categorized for Disposal

Science.gov (United States)

2015-07-01

same criteria.10 Further, we conducted a data reliability assessment of the military services’ data in their respective information management systems ...extent to which the information in the services’ ammunition inventory systems is useful for their purposes. We interviewed Single Manager for...6. Incineration - Incineration provides an environmentally acceptable means to destroy munitions not suitable for other demilitarization methods

Summary of Ammunition Support Studies under Information Condition

Directory of Open Access Journals (Sweden)

Guan Jicheng

2016-01-01

Full Text Available The informatization demand of military ammunition support was analysed. The research status of ammunition containerization, RFID technology and asset visualization were introduced. The existent problems were pointed out and the future development was predicted.

Wartime Roles and Capabilities for the Unified Logistic Staffs

Science.gov (United States)

1989-02-01

standard Army ammunition system SAPO Subarea Petroleum Office SCP service control point (fuels) SHAPE Supreme Headquarters, Allied Powers Europe SIDATH... SAPOs ). Communication exists between the operations and logistic staffs within the unified, component, Service, and JS levels. But between...daily. The JPOs/ SAPOs receive the short-term requirements and consoli- date them for resupply by submitting slates (how much, when, and where needed

A life cycle assessment of destruction of ammunition

International Nuclear Information System (INIS)

Alverbro, K.; Bjoerklund, A.; Finnveden, G.; Hochschorner, E.; Haegvall, J.

2009-01-01

The Swedish Armed Forces have large stocks of ammunition that were produced at a time when decommissioning was not considered. This ammunition will eventually become obsolete and must be destroyed, preferably with minimal impact on the environment and in a safe way for personnel. The aim of this paper is to make a comparison of the environmental impacts in a life cycle perspective of three different methods of decommissioning/destruction of ammunition, and to identify the environmental advantages and disadvantages of each of these destruction methods: open detonation; static kiln incineration with air pollution control combined with metal recycling, and a combination of incineration with air pollution control, open burning, recovery of some energetic material and metal recycling. Data used are for the specific processes and from established LCA databases. Recycling the materials in the ammunition and minimising the spread of airborne pollutants during incineration were found to be the most important factors affecting the life cycle environmental performance of the compared destruction methods. Open detonation with or without metal recycling proved to be the overall worst alternative from a life cycle perspective. The results for the static kiln and combination treatment indicate that the kind of ammunition and location of the destruction plant might determine the choice of method, since the environmental impacts from these methods are of little difference in the case of this specific grenade. Different methods for destruction of ammunition have previously been discussed from a risk and safety perspective. This is however to our knowledge the first study looking specifically on environmentally aspect in a life cycle perspective.

27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...

Possibilities of the common research-development action in the field of automated logistical engines

Directory of Open Access Journals (Sweden)

Pap Lajos

2003-12-01

Full Text Available The paper briefly presents the R&D cooperation of the Department of Materials Handling and Logistics and Departments of Automation. The main fields of cooperation are introduced. Different kind of Linear Motor (hereafter LM drives are being developed and tested for warehouse and rolling conveyor systems. Modern control strategies using AI methods are being investigated and tested for Automated guide vehicle. Wireless communication methods are being searched and developed for mobile material handling devices. Application possibilities of voice recognition and image processing are being tested for control of material handling robots and devices. Application of process visualization programs are being developed and investigated. Multi-level industrial communication system is being developed for the laboratories of the cooperating departments.

Armored Composite Ammunition Pressure Vessel

National Research Council Canada - National Science Library

Clark, William

1999-01-01

...). This ammunition containment system must not only meet environmental and handling requirements but also provide armor protection against impacting threats and reduce the response of the stowed...

27 CFR 479.192 - Commerce in firearms and ammunition.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Commerce in firearms and..., AND CERTAIN OTHER FIREARMS Other Laws Applicable § 479.192 Commerce in firearms and ammunition. For provisions relating to commerce in firearms and ammunition, including the movement of destructive devices...

Ammunition Peculiar Equipment (APE) 1995, NIR Propellant Analyzer, to MIL-STD-398, Military Standard Shields, Operational for Ammunition Operations, Criteria for Design of and Tests for Acceptance

National Research Council Canada - National Science Library

2003-01-01

... (SJMAC-DEM) to test the Ammunition Peculiar Equipment (APE) 1995 NIR Propellant Analyzer, to MIL-STD-398, "Military Standard Shields, Operational for Ammunition Operations, Criteria for Design of and Tests for Acceptance...

37 CFR 5.18 - Arms, ammunition, and implements of war.

Science.gov (United States)

2010-07-01

... implements of war. 5.18 Section 5.18 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK... implements of war. (a) The exportation of technical data relating to arms, ammunition, and implements of war... parts 120 through 130); the articles designated as arms, ammunitions, and implements of war are...

Experimentally Evaluated Explosion Resistance and Performance of Destruction Unit in Multiple Detonation of Ammunition

Directory of Open Access Journals (Sweden)

P. A. Baskakov

2016-01-01

, ensuring complete destruction of ammunition, high working life, and reliable protection of the explosion chamber walls from the hitting splinters. The destruction unit can be used to destroy a wide variety of weapons, including those containing toxic or explosive substances, as part of automated flow lines.

Key questions and responses regarding the transition to use of lead-free ammunition

DEFF Research Database (Denmark)

Thomas, Vernon G.; Kanstrup, Niels; Gremse, Carl

2015-01-01

Questions and concerns about the use of lead-free ammunition in hunting were encountered during the Oxford Lead Symposium. Many originated from commonly-held, but unsubstantiated, reports that have hindered the transition to use of lead-free ammunition in the UK and elsewhere. This paper examines...... and answers the principal reservations raised about the use of lead-free hunting ammunition. The issue of how the evidence for lead exposure and toxicity to wildlife from discharged lead shot cartridges could be better communicated to the public to enhance adoption of lead–free ammunition is addressed....... The paper presents evidence to assuage concerns about the effectiveness and nontoxicity of lead ammunition substitutes, their suitability for British shooting and weapons, and their role in wildlife health protection. Collectively, these answers to concerns could lower the public resistance to use of lead...

Defense.gov - Special Report: Hispanic American Heritage Month - 2013

Science.gov (United States)

updated and may no longer be applicable as a result of changes in law, regulation and/or administration automation and enabling technologies into the ammunition logistics lifecycle business processes. Peer began B.S. in Business Administration from the University of New Orleans and is a graduate of the 2002 DoD

Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company.

Science.gov (United States)

Quintana, Leonardo; Arias, Claudia; Cordoba, Jorge; Moroy, Magda; Pulido, Jean; Ramirez, Angela

2012-01-01

The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.

Hydroacoustic detection of dumped ammunition in the Ocean with multibeam snippet backscatter analyses. A case study from the 'Kolberger Heide' ammunition dump site (Baltic Sea, Germany)

Science.gov (United States)

Kunde, Tina; Schneider von Deimling, Jens

2016-04-01

Dumped ammunition in the sea is a matter of great concern in terms of safe navigation and environmental threads. Because corrosion of the dumped ammunition's hull is ongoing, future contamination of the ambient water by their toxic interior is likely to occur. The location of such dump sites is approximately known from historical research and ship log book analyses. Subsequent remote sensing of ammunition dumping sites (e.g. mines) on the seafloor is preferentially performed with hydro-acoustic methods such as high resolution towed side scan or by the sophisticated synthetic aperture sonar approach with autonomous underwater vehicles. However, these are time consuming and expensive procedures, while determining the precise position of individual mines remains a challenging task. To mitigate these shortcomings we suggest using ship-born high-frequency multibeam sonar in shallow water to address the task of mine detection and precise localization on the seabed. Multibeam sonar systems have improved their potential in regard to backscatter analyses significantly over the past years and nowadays present fast and accurate tools for shallow water surveying to (1) detect mines in multibeam snippet backscatter data (2) determine their precise location with high accuracy intertial navigation systems. A case study was performed at the prominent ammunition dumping site 'Kolberger Heide' (Baltic Sea, Germany) in the year 2014 using a modern hydro-acoustic multibeam echosounder system with 200-400 kHz (KONGSBERG EM2040c). With an average water depth of not even 20 m and the proximity to the shore line and dense waterways, this investigated area requires permanent navigational care. Previously, the study area was surveyed by the Navy with the very sophisticated HUGIN AUV equipped with a synthetic aperture sonar with best resolution by current technology. Following an evaluation of the collected data, various ammunition bodies on the sea floor could be clearly detected. Analyses

Competitive Internal Logistics Systems through Automation

OpenAIRE

Granlund, Anna

2011-01-01

The growing demand for products and services puts great pressure on logistics performance and enhances the role that logistics plays in determining a company’s competitiveness. This research focuses on internal logistics systems, which includes all logistics activities and processes within the physical limits of an isolated company. Internal logistics is vital for the overall function of many companies. However, despite its importance, this part of logistics has traditionally not been viewed ...

27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Manufacture, importation... COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture, importation and sale of armor piercing ammunition. No person shall manufacture or import, and no manufacturer...

A Study of Ammunition Response to the Interior Ballistics Environment of Gun Launch

National Research Council Canada - National Science Library

Ray, Stephen E; Nusca, Michael J; Horst, Albert W

2006-01-01

... propellant charge during gun launch. Since material stress imposed on the ammunition could potentially damage the projectile or its payload, a detailed knowledge of the peak stress is essential in the ammunition design process...

Logistics and Inventory System -

Data.gov (United States)

Department of Transportation — The Logistics and Inventory System (LIS) is the agencys primary supply/support automation tool. The LIS encompasses everything from order entry by field specialists...

Influence of chamber misalignment on cased telescoped (CT ammunition accuracy

Directory of Open Access Journals (Sweden)

D. Corriveau

2016-04-01

Full Text Available As part of a research program, it was desired to better understand the impact of the rotating chamber alignment with the barrel throat on the precision and accuracy of a novel cased telescoped (CT ammunition firing rifle. In order to perform the study, a baseline CT ammunition chamber which was concentric with a Mann barrel bore was manufactured. Additionally, six chambers were manufactured with an offset relative to the barrel bore. These chambers were used to simulate a misaligned chamber relative to the bore axis. Precision and accuracy tests were then performed at 200 m in an indoor range under controlled conditions. For this project, 5.56 mm CT ammunition was used. As the chamber axis offset relative to the gun bore was increased, the mean point of impact was displaced away from the target center. The shift in the impact location is explained by the presence of in-bore yaw which results in lateral throw-off and aerodynamic jump components. The linear theory of ballistics is used to establish a relationship between the chamber misalignment and the resulting projectile mean point of impact for a rifle developed to fire CT ammunition. This relationship allows for the prediction of the mean point of impact given a chamber misalignment.

Identifying Efficiencies in the Supply Chain for Training Ammunition: Methods, Models, and Recommendations

Science.gov (United States)

2016-01-01

Standard Army Ammunition System–Modernized ( SAAS -MOD), Total Army Munitions Information System (TAMIS), and the Worldwide Ammunition Reporting System...activities do your ASP personnel execute that are not captured in the Workload Report accessible in SAAS ? How much time would you estimate each of these

The conventional ammunition requirements determination process of the U.S. Navy.

OpenAIRE

Mawson, John III

1985-01-01

Approved for public release; distribution is unlimited The objective of this thesis is to analyze the Requirements Determination procedures in the Navy's Conventional Gun Ammunition System in an attempt to identify areas for potential improvement. The Conventional Gun Ammunition System involves a logical progression of steps initiated on an annual basis. The Secretary of Defense begins the process by issuing broad guidance for the development of documentation to support b...

Development of automated information system for domestic waste logistics management (by the example of Apatity town

Directory of Open Access Journals (Sweden)

Ladik A. S.

2016-03-01

Full Text Available A software system for management information support of domestic waste logistics (by the example of Apatity town has been developed for management information support efficiency enhancement of domestic waste collection and transportation processes in the municipal systems subject to hygiene and sanitary norms and standards. The system is implemented as an interactive multilogic web-service. The system provides computational procedure execution of financial expenditure and ecological damage in the issue of domestic waste collection and transportation and environmental risk minimization on the basis of proposed algorithms for automated synthesis of adaptive journey routes in comparison with existing prototypes

Plastic litter from shotgun ammunition on Danish coastlines - Amounts and provenance.

Science.gov (United States)

Kanstrup, Niels; Balsby, Thorsten J S

2018-06-01

Plastic litter in the marine environment is a major global issue. Discarded plastic shotgun ammunition shells and discharged wads are an unwelcome addition and feature among the top ten litter items found on reference beaches in Denmark. To understand this problem, its scale and origins, collections were made by volunteers along Danish coastal shorelines. In all 3669 plastic ammunition items were collected at 68 sites along 44.6 km of shoreline. The collected items were scored for characteristic variables such as gauge and length, shot type, and the legibility of text, the erosion, and the presence of metallic components. Scores for characteristics were related to the site, area, and season and possible influences discussed. The prevalence of collected plastic shotgun litter ranges from zero to 41 items per 100 m with an average of 3.7 items per 100 m. Most ammunition litter on Danish coasts originates from hunting on Danish coastal waterbodies, but a small amount may come from further afield. North Sea coasts are the most distinctive suggesting the possible contribution of long distance drift as well as the likelihood that such litter can persist in marine habitats for decades. The pathway from initial discard to eventual wash-up and collection depends on the physical properties of plastic components, marine tides and currents, coastal topography and shoreline vegetation. Judging from the disintegration of the cartridge and the wear and decomposition of components, we conclude that there is a substantial supply of polluting plastic ammunition materials that has and will accumulate. These plastic items pose a hazard to marine ecosystems and wash up on coasts for many years to come. We recommend that responsible managers, hunters and ammunition manufacturers will take action now to reduce the problem and, thereby, protect ecosystems, wildlife and the sustainability of hunting. Copyright © 2018 Elsevier Ltd. All rights reserved.

The use of depleted uranium ammunition during NATO aggression against Federal Republic of Yugoslavia

International Nuclear Information System (INIS)

Zaric, M.; Petkovic, S.; Devic, Z.

2002-01-01

It is well known that DU (depleted uranium) weaponry was extensively used during the 'Desert Storm' operation in Iraq. There is no doubt that NATO used DU ammunition in Bosnia in 1994 and 1995. It is also common knowledge that many NATO armies are equipped with DU ammunition in various calibers (from 20 up to 155 mm) as a standard part of certain weapon systems. These facts, as a result of literature research, as well as Yugoslav Army (YA) intelligence data on the eve of the aggression clearly showed that NATO most probably would use DU ammunition. (author)

Reducing Lead on the Landscape: Anticipating Hunter Behavior in Absence of a Free Nonlead Ammunition Program.

Directory of Open Access Journals (Sweden)

Loren Chase

Full Text Available Lead is a neurotoxin that has been documented to affect many forms of wildlife, and has been identified as a limiting factor in a population of California Condors in Northern Arizona. The Arizona Game and Fish Department provides vouchers for free nonlead ammunition to hunters selected to hunt within the distribution of California Condors, with the intention of having fewer lead-laden offal piles available to California Condors. Although wildlife agencies may reasonably assume voucher programs motivate hunters into choosing nonlead ammunition, the lead reduction efforts attributable to the voucher program has not been empirically quantified. Our intention was to compare a control group of hunters to a treatment group of hunters within California Condor occupied areas. Both groups received educational materials regarding the deleterious effects of lead, but the treatment group also received a voucher for a free initial box of ammunition. About half of the control group used nonlead ammunition, compared to about three-fourths of the treatment group. Prominent barriers to adoption of nonlead ammunition included a general difficulty of obtaining it, obtaining it in the desired caliber, and its costliness. Frequently mentioned motivations for using nonlead was the exhortation to use it by the Department, and the desire to aid California Condor recovery by hunters. The disparate compliance rates found herein confirm and quantify the success of nonlead ammunition voucher programs, but underscore the importance of working to increase the supply of nonlead ammunition with the end of facilitating its procurement and reducing its cost.

Federal Logistics Information System (FLIS) Procedures Manual. Volume 3. Development and Maintenance of Item Logistics Data Tools.

Science.gov (United States)

1995-01-01

Ammunition for cannon with illu- to fight fires minating projectile started by Ammunition for cannon with incen- explosion. diary projectile...OSNABURG Ozu Aya JEAN 146 DoD 4100.39-M Volume 3 APPENDIX 3-3-B SAMPLE OF NEW CONCEPT FIIG FIIG SAMPLE INC 00000 APPENDIX C Table 32 Palm Beach PLAIN

Automation and communication in the underground logistic area. Process and technology; Automatisierung und Kommunikation im Bereich Logistik unter Tage. Prozesse und Technik

Energy Technology Data Exchange (ETDEWEB)

Giesselmann, Thomas [Zentralstab Kernbereich, RAG Deutsche Steinkohle AG, Herne (Germany); Ball, Roland [Bergwerk Auguste Victoria, RAG Deutsche Steinkohle AG, Marl (Germany)

2009-11-05

A trendsetting change in German deep coal mining took place after the political decisions relating to coal in 2007. Besides the efforts at productivity increase and cost reduction, future-proof reshaping of mining under changing basic conditions is in order. A rich field of infrastructure activity, particularly in transport logistics, is to be found here, the more so as around 50% of the underground strata are needed. Though the technical prerequisites for transport logistics improvement, like automated diesel cars, PDA use, and WLAN networks, have been created in recent years, today's focus is on transparent process structuring for the entire logistics chain and the expedient combination and use of the multitude of existing and newly acquired process data. An initial project at the Auguste Victoria colliery, namely the equipment of underground transportation means with machine and speech communicators and the installation of a logistics control room, should yield confirmation of the expected improvements and functionalities. (orig.)

Copper and zinc content in wild game shot with lead or non-lead ammunition - implications for consumer health protection.

Science.gov (United States)

Schlichting, Daniela; Sommerfeld, Christine; Müller-Graf, Christine; Selhorst, Thomas; Greiner, Matthias; Gerofke, Antje; Ulbig, Ellen; Gremse, Carl; Spolders, Markus; Schafft, Helmut; Lahrssen-Wiederholt, Monika

2017-01-01

The aim of this study was to examine the contamination of game meat with copper and zinc and establish whether the use of alternative (non-lead) ammunition can lead to higher or unsafe levels of copper and zinc in the meat of roe deer, wild boar and red deer. The research project "Safety of game meat obtained through hunting" (LEMISI) was conducted in Germany with the purpose of examining the entry of lead as well as copper and zinc into the meat of hunted game when using either lead or non-lead ammunition. The outcome of this study shows that the usage of both lead-based ammunition and alternative non-lead ammunition results in the entry of copper and zinc into the edible parts of the game. Using non-lead ammunition does not entail dangerously elevated levels of copper and zinc, so replacing lead ammunition with alternative ammunition does not introduce a further health problem with regard to these metals. The levels of copper and zinc in game meat found in this study are in the range found in previous studies of game. The content of copper and zinc in game meat is also comparable to those regularly detected in meat and its products from livestock (pig, cattle, sheep) for which the mean human consumption rate is much higher. From the viewpoint of consumer health protection, the use of non-lead ammunition does not pose an additional hazard through copper and zinc contamination. A health risk due to the presence of copper and zinc in game meat at typical levels of consumer exposure is unlikely for both types of ammunition.

Hunting, Sale, and Consumption of Bushmeat Killed by Lead-Based Ammunition in Benin

Directory of Open Access Journals (Sweden)

Shukrullah Ahmadi

2018-06-01

Full Text Available Human consumption of animal meat killed by lead ammunition has been reported as a risk factor for elevated blood lead levels. However, little is known about how meat killed by lead ammunition is hunted, prepared, sold, and consumed. We explored the process from hunting to consumption within communities in Benin from the perspective of preventive measures. We conducted 38 semi-structured interviews with hunters (n = 9 and sellers (n = 8 of bushmeat and families (n = 21 as consumers of bushmeat killed by lead ammunition. Data were transcribed, translated, and coded for analysis. We conducted content analysis to identify and describe key themes and processes from hunting to consumption. Many hunters (n = 7/9 used lead-based ammunition. After the meat is hunted, market sellers often buy it directly from the hunters. Amongst the hunters and sellers, few (n = 4/17 acknowledged removing the meat impacted by lead shot prior to sale. Many families (n = 15/21 mentioned consumption of the hunted bushmeat. The meat is cooked before sharing with children. Many families (n = 19/21 mentioned they look for the remains of the lead shot or remove the meat impacted by the shot. The finding suggests that hunting, sale, and consumption of bushmeat killed by lead ammunition are well-known practices in Allada, Benin. The bushmeat often hunted illegally with lead shot is sold in the markets and eventually consumed by families who attempt to clean the meat impacted by the lead shot before cooking it.

Water Conservation Study, Badger Army Ammunition Plant, Baraboo, Wisconsin

National Research Council Canada - National Science Library

1995-01-01

The purpose of this water conservation study is to identify projects which will result in energy maintenance and cost savings in the process water distribution system at Badger Army Ammunition Plant (BAAP...

Water Conservation Study. Badger Army Ammunition Plant, Baraboo, Wisconsin

National Research Council Canada - National Science Library

1995-01-01

The purpose of this water conservation study is to identify projects which will result in energy maintenance and cost savings in the process water distribution system at Badger Army Ammunition Plant (BAAP...

Business Case Analysis for Microchip Logistics

National Research Council Canada - National Science Library

Vandenberghe, Jack

2002-01-01

.... The DLA Microchip Logistics (MICLOG) program is investigating the use of an automatic data collection system to improve item tracking and access to product information, and assist in automating the inventory induction process...

The Safety Analysis of Shipborne Ammunition in Fire Environment

Science.gov (United States)

Ren, Junpeng; Wang, Xudong; Yue, Pengfei

2017-12-01

The safety of Ammunition has always been the focus of national military science and technology issues. And fire is one of the major safety threats to the ship’s ammunition storage environment, In this paper, Mk-82 shipborne aviation bomb has been taken as the study object, simulated the whole process of fire by using the FDS (Fire Detection System) software. According to the simulation results of FDS, ANSYS software was used to simulate the temperature field of Mk-82 carrier-based aviation bomb under fire environment, and the safety of aviation bomb in fire environment was analyzed. The result shows that the aviation bombs under the fire environment can occur the combustion or explosion after 70s constant cook-off, and it was a huge threat to the ship security.

Mobile Robots for Hospital Logistics

DEFF Research Database (Denmark)

Özkil, Ali Gürcan

services to maintain the quality of healthcare provided. Logistics is the most resource demanding service in a hospital. The scale of the transportation tasks is huge and the material flow in a hospital is comparable to that of a factory. We believe that these transportation tasks, to a great extent, can...... be and will be automated using mobile robots. This talk consequently addresses the key technical issues of implementing service robots in hospitals. In simple terms, a robotic system for automating hospital logistics has to be reliable, adaptable and scalable. Robots have to be semi-autonomous, and should reliably...... navigate in large and dynamic environments in the hospital. The complexity of the problem has to be manageable, and the solutions have to be flexible, so that the system can be applicable in real world settings. This talk summarizes the efforts to address these issues. Upon the analysis...

The effect of range and ammunition type on fracture patterns in porcine postcranial flat bones.

Science.gov (United States)

Fragkouli, Kleio; Al Hakeem, Eyad; Bulut, Ozgur; Simmons, Tal

2018-01-01

Pig half-carcasses were shot in scapulae, ribs and mandibles with either 0.243 hunting rifle using high velocity expanding ammunition (N = 30) or AK47 using full metal jacketed (FMJ) ammunition (N = 12) from a range of either 5 or 20 m. Fracture patterns related to distance of fire and ammunition type were compared on de-fleshed, macerated, and reconstructed bones. For expanding ammunition, location of fracture on ribs affected the resulting pattern. Scapulae shot from 5 m presented a comminuted pattern different from those shot from 20 m. Mandibles shot from 20 m showed a characteristic radiating pattern at entrance with the opposite ramus un-fractured; those shot from 5 m exhibited fractures to both rami. Using decision tree analysis provided accuracies of 93.8% for scapulae and 87.5% for mandibles. For FMJ, no distance dependent fracture differences were apparent in any bone. Decision tree analysis facilitated the interpretation of fracture patterns caused by projectile trauma. Copyright © 2017. Published by Elsevier Ltd.

Study of gunshot residues from Sintox® ammunition containing marking substances

Directory of Open Access Journals (Sweden)

Júlia Polovková

2015-12-01

Full Text Available Two types of factory marked Sintox® ammunition were investigated from the composition of gunshot residue particles (GSR and occurrence of marking substance points of view. The experiments were carried out with two cartridges of caliber 9 mm Luger (9 × 19 Parabellum of two producers (Ruag Ammotec, Switzerland and Men, Germany. The first cartridge (type Action 4, Ruag Ammotec contains gadolinium as a marking element, while the other cartridge (type PEP II, Men is marked with gallium in gunpowder. Scanning electron microscopy equipped with EDAX analyzer (SEM/EDX was used to detect and analyze the GSR particles in samples collected from the cartridges, barrels and shooter’s hands. Besides those, particles from the hit clothes placed at different shooting distances were collected and analyzed. The spreading of GSR cloud from the gun was observed using the high-speed camera. Results obtained clearly revealed that the way of ammunition production/construction and type of marking of ammunition can significantly influence the presence and detection reliability of marking elements in GSR. The detectability is affected also by the shooting distance.

Information Search of Toxic-Free Ammunition

Science.gov (United States)

1994-04-01

transient irritation of the eyes and mucus membranes. In this respect, it would make a good choice for an ammunition material if we were concerned...Proudfoot R: The effect of tungstate ingestion on xanthine oxidase in milk and liver. Br J Nutr 22:331-40, 1968 107. Thomerson DR, Price WJ: A...SOURCE FILE: MI File 47 ARTICLE TYPE: column AVAILABILITY: FULL TEXT Online LINE COUNT: 00157 COMPANY NAME(S): Rice Gun Products Inc.--manufactures

Radioactive reconnaissance in area of utilization ammunition of depleted uranium

International Nuclear Information System (INIS)

Fortuna, D.; Dimitrijevic, D.

2000-01-01

In this paper are presented methods of radioactive reconnaissance and taking of samples in area of utilization ammunition of depleted uranium during the armed aggression of NATO to Yugoslavia (author)

Developing Outbound Logistics in International Power and Automation Technology Company

OpenAIRE

Köykkä, Päivikki

2010-01-01

ABSTRACT The purpose of this Master’s Thesis was to document and analyse what has been done in the outbound logistics development project that has not been finished yet and to define actions for completing the project. Another objective was to plan what could be done in the future to develop the outbound logistics further. The work was commissioned by ABB. In the theoretical part of the study the main issues were related to developing outbound logistics processes. Also basic concepts ...

Logistički informacioni sistem / Logistics information system

Directory of Open Access Journals (Sweden)

Marko D. Andrejić

2010-01-01

Full Text Available Logistički automatizovani informacioni sistem treba razvijati kao deo jedinstvenog automatizovanog informacionog sistema (JAIS-a. Da bi se logistički automatizovani informacioni sistem uspešno razvijao i primenjivao u operativnoj praksi, neophodno je slediti globalni koncept razvoja JAIS-a i u razvoju više primenjivati timski rad profesionalnog informatičara i poznavaoca realnog logističkog sistema. Bitan uslov za razvoj kvalitetnog logističkog informacionog sistema jeste definisanje informacionih potreba o pojedinim objektima koje tretira logistički informacioni sistem. Zadatak logističkog automatizovanog informacionog sistema jeste da obezbedi: stalni uvid u stanje logističkog sistema; ukazivanje na potrebne i moguće mere poboljšanja; bolje planiranje i upravljanje radom realnog sistema; informisanje ljudstva o stanju realnog sistema i ukazivanje na pravce daljeg razvoja informacionih sistema. Logistički informacioni sistem treba razvijati vodeći računa i o kompatibilnosti sa budućim saveznicima i partnerima. / A logistics automated information system should be developed as a part of a unified automated information system (JAIS. In order to develop a logistics automated information system and to apply it successfully in operational use, it is necessary to follow the JAIS global development concept and rely more on teamwork of IT experts and specialists in real logistics systems. An important condition for the development of a high-quality logistics information system is to define information needs for particular objects treated by a logistics information system. The task of such a system is to provide: permanent insight into the logistics system, pointing to the necessary and possible measures for improvement, better real system planning and management activities, personnel information about the state of the real system, pointing to the directions of further system development. A logistics information system should be developed

27 CFR 478.149 - Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The provisions of §§ 478.37 and 478.99(d) with respect to the manufacture or importation of armor piercing...

Employees Technology Usage Adaptation Impact on Companies’ Logistics Service Performance

Directory of Open Access Journals (Sweden)

A. Zafer ACAR

2018-01-01

Full Text Available The information technology (IT capability of companies is one of the determinants of their competitive power. However, IT outputs depend on employees intentions to use them. As a technological investment Port automation systems are widely used in container terminals. Therefore behavioral intention in the usage of various IT applications is one of the important factors that may affect logistics service performance. This study aims to explore the employees' technology usage adaptation impact on the logistics service performance of ports. In this context, the behavioral intentions of employees who use port automation systems are investigated using the Technological Acceptance Model.

Bioaccessibility of Pb from ammunition in game meat is affected by cooking treatment.

Science.gov (United States)

Mateo, Rafael; Baos, Ana R; Vidal, Dolors; Camarero, Pablo R; Martinez-Haro, Monica; Taggart, Mark A

2011-01-14

The presence of lead (Pb) ammunition residues in game meat has been widely documented, yet little information exists regarding the bioaccessibility of this Pb contamination. We study how cooking treatment (recipe) can affect Pb bioaccessibility in meat of animals hunted with Pb ammunition. We used an in vitro gastrointestinal simulation to study bioaccessibility. The simulation was applied to meat from red-legged partridge (Alectoris rufa) hunted with Pb shot pellets and cooked using various traditional Spanish game recipes involving wine or vinegar. Total Pb concentrations in the meat were higher in samples with visible Pb ammunition by X-ray (mean±SE: 3.29±1.12 µg/g w.w.) than in samples without this evidence (1.28±0.61 µg/g). The percentage of Pb that was bioaccessible within the simulated intestine phase was far higher in meat cooked with vinegar (6.75%) and wine (4.51%) than in uncooked meat (0.7%). Risk assessment simulations using our results transformed to bioavailability and the Integrated Exposure Uptake Biokinetic model (IEUBK; US EPA) show that the use of wine instead of vinegar in cooking recipes may reduce the percentage of children that would be expected to have >10 µg/dl of Pb in blood from 2.08% to 0.26% when game meat represents 50% of the meat in diet. Lead from ammunition in game meat is more bioaccessible after cooking, especially when using highly acidic recipes. These results are important because existing theoretical models regarding Pb uptake and subsequent risk in humans should take such factors into account.

Optimizing the Capacity and Operation of U.S. Army Ammunition Production Facilities

National Research Council Canada - National Science Library

Bayram, Vedat

2002-01-01

.... The Army must also manage and maintain capacity to replenish ammunition consumed by major theater wars without expanding the industrial base, The combined organic and inorganic industrial base...

Bioaccessibility of Pb from ammunition in game meat is affected by cooking treatment.

Directory of Open Access Journals (Sweden)

Rafael Mateo

Full Text Available BACKGROUND: The presence of lead (Pb ammunition residues in game meat has been widely documented, yet little information exists regarding the bioaccessibility of this Pb contamination. We study how cooking treatment (recipe can affect Pb bioaccessibility in meat of animals hunted with Pb ammunition. METHODOLOGY/PRINCIPAL FINDINGS: We used an in vitro gastrointestinal simulation to study bioaccessibility. The simulation was applied to meat from red-legged partridge (Alectoris rufa hunted with Pb shot pellets and cooked using various traditional Spanish game recipes involving wine or vinegar. Total Pb concentrations in the meat were higher in samples with visible Pb ammunition by X-ray (mean±SE: 3.29±1.12 µg/g w.w. than in samples without this evidence (1.28±0.61 µg/g. The percentage of Pb that was bioaccessible within the simulated intestine phase was far higher in meat cooked with vinegar (6.75% and wine (4.51% than in uncooked meat (0.7%. Risk assessment simulations using our results transformed to bioavailability and the Integrated Exposure Uptake Biokinetic model (IEUBK; US EPA show that the use of wine instead of vinegar in cooking recipes may reduce the percentage of children that would be expected to have >10 µg/dl of Pb in blood from 2.08% to 0.26% when game meat represents 50% of the meat in diet. CONCLUSIONS/SIGNIFICANCE: Lead from ammunition in game meat is more bioaccessible after cooking, especially when using highly acidic recipes. These results are important because existing theoretical models regarding Pb uptake and subsequent risk in humans should take such factors into account.

LOGAM (Logistic Analysis Model). Volume 2. Users Manual.

Science.gov (United States)

1982-08-01

as opposed to simulation models which represent a system’s behavior as a function of time. These latter classes of models are often complex. They...includes the cost of ammunition and missiles comsumed by the system being costed during unit training. Excluded is the cost of ammunition consumed during...data. The results obtained from sensitivity testing may be used to construct graphs which display the behavior of the maintenance concept over the range

The identification of lead ammunition as a source of lead exposure in First Nations: The use of lead isotope ratios

International Nuclear Information System (INIS)

Tsuji, Leonard J.S.; Wainman, Bruce C.; Martin, Ian D.; Sutherland, Celine; Weber, Jean-Philippe; Dumas, Pierre; Nieboer, Evert

2008-01-01

The use of lead shotshell to hunt water birds has been associated with lead-contamination in game meat. However, evidence illustrating that lead shotshell is a source of lead exposure in subsistence hunting groups cannot be deemed definitive. This study seeks to determine whether lead shotshell constitutes a source of lead exposure using lead isotope ratios. We examined stable lead isotope ratios for lichens, lead shotshell and bullets, and blood from residents of Fort Albany and Kashechewan First Nations, and the City of Hamilton, Ontario, Canada. Data were analyzed using ANOVA and regression analyses. ANOVA of isotope ratios for blood revealed significant differences with respect to location, but not sex. Hamilton differed from both Kashechewan and Fort Albany; however, the First Nations did not differ from each other. ANOVA of the isotope ratios for lead ammunition and lichens revealed no significant differences between lichen groups (north and south) and for the lead ammunition sources (pellets and bullets). A plot of 206 Pb/ 204 Pb and 206 Pb/ 207 Pb values illustrated that lichens and lead ammunition were distinct groupings and only the 95% confidence ellipse of the First Nations group overlapped that of lead ammunition. In addition, partial correlations between blood-lead levels (adjusted for age) and isotope ratios revealed significant (p 206 Pb/ 204 Pb and 206 Pb/ 207 Pb, and a significant negative correlation for 208 Pb/ 206 Pb, as predicted if leaded ammunition were the source of lead exposure. In conclusion, lead ammunition was identified as a source of lead exposure for First Nations people; however, the isotope ratios for lead shotshell pellets and bullets were indistinguishable. Thus, lead-contaminated meat from game harvested with lead bullets may also be contributing to the lead body burden

First Annual Workshop on Space Operations Automation and Robotics (SOAR 87)

Science.gov (United States)

Griffin, Sandy (Editor)

1987-01-01

Several topics relative to automation and robotics technology are discussed. Automation of checkout, ground support, and logistics; automated software development; man-machine interfaces; neural networks; systems engineering and distributed/parallel processing architectures; and artificial intelligence/expert systems are among the topics covered.

Automation in Warehouse Development

CERN Document Server

Verriet, Jacques

2012-01-01

The warehouses of the future will come in a variety of forms, but with a few common ingredients. Firstly, human operational handling of items in warehouses is increasingly being replaced by automated item handling. Extended warehouse automation counteracts the scarcity of human operators and supports the quality of picking processes. Secondly, the development of models to simulate and analyse warehouse designs and their components facilitates the challenging task of developing warehouses that take into account each customer’s individual requirements and logistic processes. Automation in Warehouse Development addresses both types of automation from the innovative perspective of applied science. In particular, it describes the outcomes of the Falcon project, a joint endeavour by a consortium of industrial and academic partners. The results include a model-based approach to automate warehouse control design, analysis models for warehouse design, concepts for robotic item handling and computer vision, and auton...

AIRLINE LOGISTICS AS A PREFERRED GLOBAL LOGISTICS SUPPLY CHAIN WITH REFERENCE TO EXPORTERS IN COIMBATORE DISTRICT

OpenAIRE

P. Mani Mekalai; Dr. I. Parvinbanu

2018-01-01

Forecast of Airline volume for India made in the report suggests that the domestic and international Airline throughput is expected to grow by eight to ten times the present level in the next twenty years. Catering to the growth of this magnitude would involve expansion of infrastructure facilities, simplification of procedures and adoption of Information Technology/ Automation besides development of Human Resources in the sector. Out of the competitive analysis made on airline logistics serv...

Final Remedial Investigation Sampling Plan Addendum. Milan Army Ammunition Plant Remedial Investigation Southern Study Area (Operable Unit No. 5)

Science.gov (United States)

1997-09-01

91-D-0012 Task Order No. 0007 2.4.7 Milan Army Ammunition Plant, Phytoremediation Pilot Study, USAEC, 1996 .. .............................. 2-28 2.5...indicated that heavy metal contamination (lead, chromium, and mercury ) was present at relatively low levels, and explosive contamination was limited to...and MI172 where lead was found at 22.9 j.g/1 and 18.4 Ig/l, respectively. 2.4.7 Milan Army Ammunition Plant, Phytoremediation Pilot Study, USAEC, 1996

27 CFR 70.444 - Importation of arms, ammunition, and implements of war.

Science.gov (United States)

2010-04-01

..., ammunition, and implements of war. 70.444 Section 70.444 Alcohol, Tobacco Products and Firearms ALCOHOL AND... implements of war. Part 47 of title 27 CFR implements Executive Order 11958 and supplements the import... implements of war, (b) Import permit requirements, (c) Import certification and verification, (d) Import...

Ingestion of lead from ammunition and lead concentrations in white-tailed sea eagles (Haliaeetus albicilla) in Sweden

International Nuclear Information System (INIS)

Helander, B.; Axelsson, J.; Borg, H.; Holm, K.; Bignert, A.

2009-01-01

In this study we show for the first time that lead poisoning from ammunition is a significant mortality factor for white-tailed sea eagle (WSE) (Haliaeetus albicilla) in Sweden. We analyzed 118 WSEs collected between 1981 and 2004 from which both liver and kidney samples could be taken. A total of 22% of all eagles examined had elevated (> 6 μg/g d.w.) lead concentrations, indicating exposure to leaded ammunition, and 14% of the individuals had either liver or kidney lead concentrations diagnostic of lethal lead poisoning (> 20 μg/g d.w.). Lead concentrations in liver and kidney were significantly correlated. In individuals with lead levels 20 μg/g, concentrations were significantly higher in liver. The lead isotope ratios indicate that the source of lead in individuals with lethal concentrations is different from that of individuals exhibiting background concentrations of lead ( 10 times higher than concentrations reported for Baltic fish from the same time period. In contrast to other biota there was no decrease in lead concentrations in WSE over the study period. The proportion of lead poisoned WSE remained unchanged over the study period, including two years after a partial ban of lead shot was enforced in 2002 for shallow wetlands. The use of lead in ammunition poses a threat to all raptors potentially feeding on shot game or offal. The removal of offal from shot game and alternatives to leaded ammunition needs to be implemented in order to prevent mortality from lead in raptors and scavengers.

Experience of foreign armies in the application of RFID technology in logistics

Directory of Open Access Journals (Sweden)

Velibor V. Jovanović

2012-04-01

Full Text Available RFID technology has found a wide application in both civilian and military systems with very different purposes; moreover, a tremendous growth of its application is predicted in the future. As a support to core activities, both in the Army and business systems, logistics must provide the conditions for a continuous system optimization, which can be achieved by RFID technology. It provides data collecting, processing, automated identification and storage. The most important factors of logistics information systems are satisfied with this technology. The main feature of the logistics of controlling - that data is always to be collected at a source - is also present. Managing supply chains is almost inconceivable without modern information systems. This technology enables automated data processing thus creating conditions which facilitate decision making. Military applications of RFID technology include monitoring codified items to the extent required by competent commanders, as well as documenting changes in business processes within provided logistic functions of supply. This work gives an analytical approach to the methods of RFID technology application in foreign armies with regard to its possible introduction into the practice of the Serbian Army.

Ammunition production in the USSR in 20-30 years of 20th century and efficiency of the Red Army in the eve and during of the Great Patriotic War

Directory of Open Access Journals (Sweden)

Андрей Николаевич Балыш

2010-12-01

Full Text Available The role of Ammunition Industry in connection with action variation at the first part of 20th century is analyzed in the present paper. It is studied how the New Economic Policy (NEP influenced onto the development of ammunition industry and respective branches of heavy industry. For the first time several manufacturing peculiarities of ammunition main elements (by example of ammunition bodies in the eve of the Great Patriotic War are analyzed on the base of archival documents and the role of these peculiarities in fighting efficiency of the Soviet forces during the Second World War is studied.

Classifying machinery condition using oil samples and binary logistic regression

Science.gov (United States)

Phillips, J.; Cripps, E.; Lau, John W.; Hodkiewicz, M. R.

2015-08-01

The era of big data has resulted in an explosion of condition monitoring information. The result is an increasing motivation to automate the costly and time consuming human elements involved in the classification of machine health. When working with industry it is important to build an understanding and hence some trust in the classification scheme for those who use the analysis to initiate maintenance tasks. Typically "black box" approaches such as artificial neural networks (ANN) and support vector machines (SVM) can be difficult to provide ease of interpretability. In contrast, this paper argues that logistic regression offers easy interpretability to industry experts, providing insight to the drivers of the human classification process and to the ramifications of potential misclassification. Of course, accuracy is of foremost importance in any automated classification scheme, so we also provide a comparative study based on predictive performance of logistic regression, ANN and SVM. A real world oil analysis data set from engines on mining trucks is presented and using cross-validation we demonstrate that logistic regression out-performs the ANN and SVM approaches in terms of prediction for healthy/not healthy engines.

Constraints placed on Marine Corps ammunition requirements by the PPBS

OpenAIRE

Burlingham, Donald Michael.

1988-01-01

Approved for public release; distribution is unlimited The purpose of this report is to determine whether the products of the Planning, Programming and Budgeting System (PPBS) are worthwhile, they must be measured against some form of output. The prepositioned War Reserve (PWR) of the Marine Corps is a measure of sustainability: a desired output of the PPBS. This thesis investigated the PPBS, the Marine Corps programming methodology and ammunition requirement generation to determine whethe...

Lead Free Frangible Ammunition Exposure at United States Air Force Small Arms Firing Ranges, 2005 - 2007

National Research Council Canada - National Science Library

Moran, Michael P; Ott, Darrin K

2008-01-01

...) has performed related to health concerns expressed by Security Forces Combat Arms (CATM) instructors regarding exposure to contaminants generated during the discharge of lead free frangible ammunition...

Logistics of International Express Shipping and Air Traffic

Directory of Open Access Journals (Sweden)

Jasmina Pašagić Škrinjar

2013-06-01

Full Text Available The paper studies the relations between logistics of international express shipments and air traffic analysing the basic characteristics of international express shipments that are carried by combined transport, usually road vehicles and aircraft. The paper indicates the possibility of optimising individual technological processes in the logistic chain of express shipments distribution. It analyses the forms for the calculation of time slots in single logistic chain hubs of collecting and delivery of express shipments. It has been shown that the international distribution chains in the air express sector, related to the globalisation process, change the traditional functions of combined ground-air transport. Here, the increased investment into automation plays the crucial role in the development strategies of companies and in the operationalization of the quality policy of numerous carriers of express shipments by air.

Prohibited Possessors and the Law: How Inmates in Los Angeles Jails Understand Firearm and Ammunition Regulations

Directory of Open Access Journals (Sweden)

Melissa Barragan

2017-10-01

Full Text Available Using data from 140 interviews with individuals detained in the Los Angeles County Jail system, this article examines what gun offenders know about gun and ammunition regulation in California. Though most respondents had a consistent, albeit general, understanding of the regulations limiting gun acquisition and possession, analysis suggests that their understanding of ammunition restrictions was more limited. Our sample’s awareness of firearms law is especially important to consider given that they are the very population targeted by firearms regulations and prohibitions at the local, state, and federal level. By examining what detained offenders know about firearms laws, we can better theorize about individual gaps in legal knowledge and the realistic expectations for how understanding of the law can affect behavior.

Characterization of exposure to byproducts from firing lead-free frangible ammunition in an enclosed, ventilated firing range.

Science.gov (United States)

Grabinski, Christin M; Methner, Mark M; Jackson, Jerimiah M; Moore, Alexander L; Flory, Laura E; Tilly, Trevor; Hussain, Saber M; Ott, Darrin K

2017-06-01

U.S. Air Force small arms firing ranges began using copper-based, lead-free frangible ammunition in the early 2000s due to environmental and health concerns related to the use of lead-based ammunition. Exposure assessments at these firing ranges have routinely detected chemicals and metals in amounts much lower than their mass-based occupational exposure limits, yet, instructors report work-related health concerns including respiratory distress, nausea, and headache. The objective of this study at one firing range was to characterize the aerosol emissions produced by weapons during firing events and evaluate the ventilation system's effectiveness in controlling instructor exposure to these emissions. The ventilation system was assessed by measuring the range static air pressure differential and the air velocity at the firing line. Air flow patterns were near the firing line. Instructor exposure was sampled using a filter-based air sampling method for metals and a wearable, real-time ultrafine particle counter. Area air sampling was simultaneously performed to characterize the particle size distribution, morphology, and composition. In the instructor's breathing zone, the airborne mass concentration of copper was low (range = free frangible ammunition. Using an ultrafine particle counter appears to be an alternative method of assessing ventilation effectiveness in removing ultrafine particulate produced during firing events.

Recovery of radiation sources after the explosion of ammunition military facility of the city of Rio Tercero (Cordoba, Argentina)

International Nuclear Information System (INIS)

Puntarulo, Luis J.; D'Apice, Americo A.; Superintendencia Federal de Bomberos, Buenos Aires

2001-01-01

In this work it is reflected the operative task of the Team of Radiological Emergencies of the Federal Superintendence of Firemen, in the intervention that took place November 3 of 1995, in the Military Factory of Ammunition of the City of River Third, in the county of Cordoba (Argentina). After big explosions that caused the destruction of the building and surrounding areas, with dispersion of ammunition of canyons, we proceeded to locate and recover the industrial sources which were also at the scene. After their recovery, the sources were given to the Nuclear Regulatory Authority for its safe guard.(author)

Determination of OB Emission Factors Using an Unmanned Aerial System (“drone”) at ?Radford Army Ammunition Plant

Science.gov (United States)

A description of the emission sampling via UAV at the Radford Army Ammunition Plant including number of samples, waste composition, UAV flight data. No emissions data presented; only qualitative description.

Quality of consumer-targeted internet guidance on home firearm and ammunition storage.

Science.gov (United States)

Freundlich, Katherine L; Skoczylas, Maria Shakour; Schmidt, John P; Keshavarzi, Nahid R; Mohr, Bethany Anne

2016-10-01

Four storage practices protect against unintentional and/or self-inflicted firearm injury among children and adolescents: keeping guns locked (1) and unloaded (2) and keeping ammunition locked up (3) and in a separate location from the guns (4). Our aim was to mimic common Google search strategies on firearm/ammunition storage and assess whether the resulting web pages provided recommendations consistent with those supported by the literature. We identified 87 web pages by Google search of the 10 most commonly used search terms in the USA related to firearm/ammunition storage. Two non-blinded independent reviewers analysed web page technical quality according to a 17-item checklist derived from previous studies. A single reviewer analysed readability by US grade level assigned by Flesch-Kincaid Grade Level Index. Two separate, blinded, independent reviewers analysed deidentified web page content for accuracy and completeness describing the four accepted storage practices. Reviewers resolved disagreements by consensus. The web pages described, on average, less than one of four accepted storage practices (mean 0.2 (95% CL 0.1 to 0.4)). Only two web pages (2%) identified all four practices. Two web pages (2%) made assertions inconsistent with recommendations; both implied that loaded firearms could be stored safely. Flesch-Kincaid Grade Level Index averaged 8.0 (95% CL 7.3 to 8.7). The average technical quality score was 7.1 (95% CL 6.8 to 7.4) out of an available score of 17. There was a high degree of agreement between reviewers regarding completeness (weighted κ 0.78 (95% CL 0.61 to 0.97)). The internet currently provides incomplete information about safe firearm storage. Understanding existing deficiencies may inform future strategies for improvement. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

The BIG 'L' American Logistics in World War II

National Research Council Canada - National Science Library

Gropman, Alan

1997-01-01

...), and acquisition. Sustain is equally broad, involving munitions and ammunition, food and cooks, spares and spare parts, maintenance and maintainers, billets and billeters, hospitals and doctors and nurses, and transportation...

Angled shots onto body armour using 9 mm ammunition: the effect on potential blunt injury.

Science.gov (United States)

Lyall, Alison; Carr, D J; Lankester, C; Malbon, C

2017-02-01

Some military specialists wear body armour that is more similar to police armour and provides protection from ammunition fired from pistols. During ballistic testing, these armours are mounted on a standardised type of modelling clay and the back face signature (BFS; depth of depression) formed as a result of the non-perforating impact event on to the armour is measured. This study investigated the effect of impact angle on the BFS and on the deformation of the bullet. Two commonly worn types of armour (HG1/A+KR1 and HG1+KR1) were considered that provide protection from pistol ammunition and sharp weapons. Armours were tested against two types of pistol ammunition (9 mm full metal jacket and 9 mm hollow point) at eight different impact angles (0°, 15°, 30°, 45°, 60°, 70°, 75° and 80°). Increased impact angles resulted in smaller BFSs. Impact angle also affected whether bullets were retained in the armour; as the impact angle increased, the probability of a round exiting the side of the armour increased. Bullet deformation was affected by impact angle. Understanding the deformation of bullets may assist with recreating a shooting incident and interpreting forensic evidence. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Bioprocessing automation in cell therapy manufacturing: Outcomes of special interest group automation workshop.

Science.gov (United States)

Ball, Oliver; Robinson, Sarah; Bure, Kim; Brindley, David A; Mccall, David

2018-04-01

Phacilitate held a Special Interest Group workshop event in Edinburgh, UK, in May 2017. The event brought together leading stakeholders in the cell therapy bioprocessing field to identify present and future challenges and propose potential solutions to automation in cell therapy bioprocessing. Here, we review and summarize discussions from the event. Deep biological understanding of a product, its mechanism of action and indication pathogenesis underpin many factors relating to bioprocessing and automation. To fully exploit the opportunities of bioprocess automation, therapeutics developers must closely consider whether an automation strategy is applicable, how to design an 'automatable' bioprocess and how to implement process modifications with minimal disruption. Major decisions around bioprocess automation strategy should involve all relevant stakeholders; communication between technical and business strategy decision-makers is of particular importance. Developers should leverage automation to implement in-process testing, in turn applicable to process optimization, quality assurance (QA)/ quality control (QC), batch failure control, adaptive manufacturing and regulatory demands, but a lack of precedent and technical opportunities can complicate such efforts. Sparse standardization across product characterization, hardware components and software platforms is perceived to complicate efforts to implement automation. The use of advanced algorithmic approaches such as machine learning may have application to bioprocess and supply chain optimization. Automation can substantially de-risk the wider supply chain, including tracking and traceability, cryopreservation and thawing and logistics. The regulatory implications of automation are currently unclear because few hardware options exist and novel solutions require case-by-case validation, but automation can present attractive regulatory incentives. Copyright © 2018 International Society for Cellular Therapy

Numerical simulation and optimized design of cased telescoped ammunition interior ballistic

Directory of Open Access Journals (Sweden)

Jia-gang Wang

2018-04-01

Full Text Available In order to achieve the optimized design of a cased telescoped ammunition (CTA interior ballistic design, a genetic algorithm was introduced into the optimal design of CTA interior ballistics with coupling the CTA interior ballistic model. Aiming at the interior ballistic characteristics of a CTA gun, the goal of CTA interior ballistic design is to obtain a projectile velocity as large as possible. The optimal design of CTA interior ballistic is carried out using a genetic algorithm by setting peak pressure, changing the chamber volume and gun powder charge density. A numerical simulation of interior ballistics based on a 35 mm CTA firing experimental scheme was conducted and then the genetic algorithm was used for numerical optimization. The projectile muzzle velocity of the optimized scheme is increased from 1168 m/s for the initial experimental scheme to 1182 m/s. Then four optimization schemes were obtained with several independent optimization processes. The schemes were compared with each other and the difference between these schemes is small. The peak pressure and muzzle velocity of these schemes are almost the same. The result shows that the genetic algorithm is effective in the optimal design of the CTA interior ballistics. This work will be lay the foundation for further CTA interior ballistic design. Keywords: Cased telescoped ammunition, Interior ballistics, Gunpowder, Optimization genetic algorithm

Ingestion of lead from ammunition and lead concentrations in white-tailed sea eagles (Haliaeetus albicilla) in Sweden

Energy Technology Data Exchange (ETDEWEB)

Helander, B., E-mail: bjorn.helander@nrm.se [Department of Contaminant Research, Swedish Museum of Natural History, Box 50007, SE-104 05 Stockholm (Sweden); Axelsson, J., E-mail: jeanette.axelsson@hgen.slu.se [Department of Environmental Toxicology, Evolutionary Biology Centre, Uppsala University, SE-752 36 Uppsala (Sweden); Borg, H., E-mail: hans.borg@itm.su.se [Department of Applied Environmental Science/ITM, Stockholm University, SE-106 91 Stockholm (Sweden); Holm, K. [Department of Applied Environmental Science/ITM, Stockholm University, SE-106 91 Stockholm (Sweden); Bignert, A., E-mail: anders.bignert@nrm.se [Department of Contaminant Research, Swedish Museum of Natural History, Box 50007, SE-104 05 Stockholm (Sweden)

2009-10-15

In this study we show for the first time that lead poisoning from ammunition is a significant mortality factor for white-tailed sea eagle (WSE) (Haliaeetus albicilla) in Sweden. We analyzed 118 WSEs collected between 1981 and 2004 from which both liver and kidney samples could be taken. A total of 22% of all eagles examined had elevated (> 6 {mu}g/g d.w.) lead concentrations, indicating exposure to leaded ammunition, and 14% of the individuals had either liver or kidney lead concentrations diagnostic of lethal lead poisoning (> 20 {mu}g/g d.w.). Lead concentrations in liver and kidney were significantly correlated. In individuals with lead levels < 6 {mu}g/g, concentrations were significantly higher in kidney than in liver; in individuals with lead levels > 20 {mu}g/g, concentrations were significantly higher in liver. The lead isotope ratios indicate that the source of lead in individuals with lethal concentrations is different from that of individuals exhibiting background concentrations of lead (< 6 {mu}g/g d.w.) There were no significant sex or age differences in lead concentrations. A study from the Baltic reported in principle no biomagnification of lead, but background lead concentrations in WSE liver in this study were still four to > 10 times higher than concentrations reported for Baltic fish from the same time period. In contrast to other biota there was no decrease in lead concentrations in WSE over the study period. The proportion of lead poisoned WSE remained unchanged over the study period, including two years after a partial ban of lead shot was enforced in 2002 for shallow wetlands. The use of lead in ammunition poses a threat to all raptors potentially feeding on shot game or offal. The removal of offal from shot game and alternatives to leaded ammunition needs to be implemented in order to prevent mortality from lead in raptors and scavengers.

Attenuated total reflectance-FT-IR spectroscopy for gunshot residue analysis: potential for ammunition determination.

Science.gov (United States)

Bueno, Justin; Sikirzhytski, Vitali; Lednev, Igor K

2013-08-06

The ability to link a suspect to a particular shooting incident is a principal task for many forensic investigators. Here, we attempt to achieve this goal by analysis of gunshot residue (GSR) through the use of attenuated total reflectance (ATR) Fourier transform infrared spectroscopy (FT-IR) combined with statistical analysis. The firearm discharge process is analogous to a complex chemical process. Therefore, the products of this process (GSR) will vary based upon numerous factors, including the specific combination of the firearm and ammunition which was discharged. Differentiation of FT-IR data, collected from GSR particles originating from three different firearm-ammunition combinations (0.38 in., 0.40 in., and 9 mm calibers), was achieved using projection to latent structures discriminant analysis (PLS-DA). The technique was cross (leave-one-out), both internally and externally, validated. External validation was achieved via assignment (caliber identification) of unknown FT-IR spectra from unknown GSR particles. The results demonstrate great potential for ATR-FT-IR spectroscopic analysis of GSR for forensic purposes.

Small-Caliber Ammunition Identification Guide. Volume 1. Small-Arms Cartridges Up to 15 mm

Science.gov (United States)

1978-06-01

ti acer - T trac~aute, traCLur, Traiong, traceri traccusc T[ R ElD. tir r6duitc. Gallery practicc, surhcalibcr TI’traiqan ce pcrforaiute AP-T V. B...Mukden Arsenal in 1929. ý,A A242 A248 SWEDEN MALAYSIA 2 Made at Maricbcrg Ammunition 1973. Factory. 1925-1928, 4 DOMINICAN RLPUBIAC ITALY 60 1960

The transition to non-lead rifle ammunition in Denmark: national obligations and policy considerations

DEFF Research Database (Denmark)

Kanstrup, Niels; Thomas, Vernon G.; Krone, Oliver

2016-01-01

The issue of Denmark regulating use of lead-free rifle ammunition because of potential risks of lead exposure in wildlife and humans was examined from a scientific and objective policy perspective. The consequences of adopting or rejecting such regulation were identified. Denmark is obliged to ex......-contaminated wild game meat. Opposition from hunting organizations would be expected....

Reactor pressure vessel stud management automation strategies

International Nuclear Information System (INIS)

Biach, W.L.; Hill, R.; Hung, K.

1992-01-01

The adoption of hydraulic tensioner technology as the standard for bolting and unbolting the reactor pressure vessel (RPV) head 35 yr ago represented an incredible commitment to new technology, but the existing technology was so primitive as to be clearly unacceptable. Today, a variety of approaches for improvement make the decision more difficult. Automation in existing installations must meet complex physical, logistic, and financial parameters while addressing the demands of reduced exposure, reduced critical path, and extended plant life. There are two generic approaches to providing automated RPV stud engagement and disengagement: the multiple stud tensioner and automated individual tools. A variation of the latter would include the handling system. Each has its benefits and liabilities

Containerized Ammunition Delivery System in the Republic of Korea: A Study to Determine the Shortfalls and Logisticsl Infrastructure Requirements

National Research Council Canada - National Science Library

Moore, Michael

2000-01-01

.... Transportation Command sponsored exercises, and expert interviews. The analysis presented indicates widespread deficiencies in the ammunition-receiving infrastructure at United States Air Force bases in the Republic of Korea...

FY 1997 Financial Reporting by The Defense Automated Printing Service

National Research Council Canada - National Science Library

1998-01-01

.... The accuracy of information in the financial systems and reported on financial statements is the joint responsibility of the Defense Automated Printing Service and the Defense Logistics Agency...

Automated Classification of Consumer Health Information Needs in Patient Portal Messages.

Science.gov (United States)

Cronin, Robert M; Fabbri, Daniel; Denny, Joshua C; Jackson, Gretchen Purcell

2015-01-01

Patients have diverse health information needs, and secure messaging through patient portals is an emerging means by which such needs are expressed and met. As patient portal adoption increases, growing volumes of secure messages may burden healthcare providers. Automated classification could expedite portal message triage and answering. We created four automated classifiers based on word content and natural language processing techniques to identify health information needs in 1000 patient-generated portal messages. Logistic regression and random forest classifiers detected single information needs well, with area under the curves of 0.804-0.914. A logistic regression classifier accurately found the set of needs within a message, with a Jaccard index of 0.859 (95% Confidence Interval: (0.847, 0.871)). Automated classification of consumer health information needs expressed in patient portal messages is feasible and may allow direct linking to relevant resources or creation of institutional resources for commonly expressed needs.

Corrosion of ammunition dumped in the Baltic Sea

Directory of Open Access Journals (Sweden)

Jurczak Wojciech

2017-03-01

Full Text Available The article presents the preliminary results of a research aimed at preparation for the extraction of chemical ammunition immersed after the Second World War(WWII in the waters of the Baltic Sea (BS. It has been 70 years since the first steps aiming at elimination of mainly German chemical weapons were taken, while the expected durability (tightness of metal barrels construction or other containers was estimated at 50-60 years. Consequently there is a serious risk of contamination of the Baltic Sea waters, not only with toxic warfare agents but also with the products of their decomposition. The evaluation of barrels’ and containers’ with TWA corrosion processes progress will determine the possibility of these munitions extraction to the surface in order to perform their classic utilization.

[Gunshot wounds caused by non-lethal ammunition on the porcine model post-mortem].

Science.gov (United States)

Jabrocký, Peter; Pivko, Juraj; Vondráková, Mária; Tažký, Boris

2013-10-01

In this article we focus on the effects of so called non-lethal ammunition. We studied possible mechanism of firearm injury formation as a consequence of using firearm on the body, to present a more comprehensive material in wound ballistics. We pointed out possible actions of a projectile causes on human, respectively other animal organisms, as well as to a manner in which an injury is caused by rifles or shotguns using non-lethal ammunition with rubber projectiles. In the experiment, we have focused on macroscopic analysis of the tissue penetrated by a rubber projectile fired from a long firearm and pump-action shotgun while focusing on the anatomical-morphological analysis of entry wounds to determine the effectiveness respectively, the wounding potential of the projectile. The results of the experiment based on the macroscopic analysis of entry wounds, cavities and exit wounds, show that when a rubber projectile penetrates the body it causes loss of the tissue (i.e. the minus effect) and mechanical disruption of the tissue similar to lethal projectile. Based on the measures and ballistic computations we concluded that in specific cases, like for example in a close range hit, a penetration of vital organs can cause serious or even lethal injuries.

Requirement Analysis for the Collaborative Supply and Logistics Management of Fresh Agricultural Products

Directory of Open Access Journals (Sweden)

Li Jun

2017-01-01

Full Text Available Issues and concerns for food safety, agro-processing, and the environmental and ecological impact of food production have been attracted many research interests. Traceability and logistics management of fresh agricultural products is faced with the technological challenges including food product label and identification, activity/process characterization, information systems for the supply chain, i.e., from farm to table. Application of information technologies for food processing and logistics industry in the fields of smart packaging and materials, automation and control technology, standards and their application scenarios, and production management principles were wildly studied. A collaborative research project for the supply and logistics of fresh agricultural products in Tianjin was performed. System analysis for the logistics management information system is studied. The model-driven business transformation, an approach uses formal models to explicitly define the structure and behavior of a business, is applied for the review and analysis process. Requirements for the logistic management solutions are proposed. Development of this research is crucial for the solution integration of supply and logistic management information system for fresh agricultural products.

Automated Classification of Consumer Health Information Needs in Patient Portal Messages

Science.gov (United States)

Cronin, Robert M.; Fabbri, Daniel; Denny, Joshua C.; Jackson, Gretchen Purcell

2015-01-01

Patients have diverse health information needs, and secure messaging through patient portals is an emerging means by which such needs are expressed and met. As patient portal adoption increases, growing volumes of secure messages may burden healthcare providers. Automated classification could expedite portal message triage and answering. We created four automated classifiers based on word content and natural language processing techniques to identify health information needs in 1000 patient-generated portal messages. Logistic regression and random forest classifiers detected single information needs well, with area under the curves of 0.804–0.914. A logistic regression classifier accurately found the set of needs within a message, with a Jaccard index of 0.859 (95% Confidence Interval: (0.847, 0.871)). Automated classification of consumer health information needs expressed in patient portal messages is feasible and may allow direct linking to relevant resources or creation of institutional resources for commonly expressed needs. PMID:26958285

The Possible Effects of Depleted Uranium (DU) Ammunition on the Environment and in Animals

International Nuclear Information System (INIS)

Bozic, T.; Popovic, D.; Stevanovic, J.; Koracevic-Filipovic, M.; Jovic, S.; Todorovic, D.; Radenkovic, M.

2004-01-01

As stated by the official reports, during NATO bombing of Serbia and Montenegro in 1999 approximately 500.000 missiles were used i.e. 3600 kg of uranium oxide, yielding activity of 18,3x1010 Bq entered the environment. Yugoslav Federal Ministry of Defense announced that 8 locations in the region of Vranje, Bujanovac and Lustica Peninsula, outside Kosovo/Metohia, were hit by DU ammunition and were isolated afterwards. The soil was contaminated with 200.000-250.000 Bq uranium/kg soil but this was mainly agricultural land, far from urban areas. The report stated that no DU ammunition was used above 44th parallel. The paper presents the preliminary results of the study on environmental and animal health effects due to the use of DU ammunition during NATO bombing of Serbia and Montenegro in 1999. The samples of animal blood (sheep, caws), soils and vegetation (corps, grass, leaves) were collected randomly in the region of Bujanovac (Novo Selo, Borovac) in the spring/fall of 2003. The hematological and some biochemical parameters of the peripheral blood were analyzed: concentration of hemoglobin, number of erythrocytes, leukocytes, monocytes, lymphocytes, eozinophiles, neutrophiles, serumamiloidA (SAA), haptoglobin (Hp) and malondialdehide in erythrocytes and blood serum. The samples were analyzed by classical manual counting methods, spectrophotometry (by Drapkin) and ELISA immunological technique. Blood samples from the control group of animals on a farm in the vicinity of Belgrade were taken and analyzed for the same parameters, too. The samples of soils and vegetation were dried up and analyzed for the contents of uranium and other natural and man made radionuclides by standard gamma spectrometry (HPGe detector, relative efficiency 23%). The results are to be correlated with the data on the concentration of DU that entered the environment during the bombing, as well as with the data of the long-term measurements of uranium concentrations in the environment and human

Methodological Demonstration of a Text Analytics Approach to Country Logistics System Assessments

DEFF Research Database (Denmark)

Kinra, Aseem; Mukkamala, Raghava Rao; Vatrapu, Ravi

2017-01-01

The purpose of this study is to develop and demonstrate a semi-automated text analytics approach for the identification and categorization of information that can be used for country logistics assessments. In this paper, we develop the methodology on a set of documents for 21 countries using...... and the text analyst. Implications are discussed and future work is outlined....

Stock Liquidity and Corporate Cash Holdings: Feedback and the Cash as Ammunition Hypothesis

OpenAIRE

Nyborg, Kjell G; Wang, Zexi

2013-01-01

The paper contributes to the literature on corporate cash holdings by showing that there is a financial markets channel that affects corporations’ cash holdings. Leaning on the literature on stock price feedback to firm fundamentals, we advance the hypothesis that firms with more liquid stocks hold more cash, ceteris paribus, as ammunition to defend against negative cascades or stimulate positive ones. This contrasts with an alternative view that firms with more liquid stocks are less financi...

Fire protection in ammunition storage spaces on board naval craft: An evaluation of the water application rate

NARCIS (Netherlands)

Lindström, J.; Rahm, M.; Hiltz, J.; Boonacker, B.; Wal, R. van der; Haara, M.

2012-01-01

Ammunition storage spaces on naval vessels are commonly fitted with drencher systems that are designed to prevent ordnance reaching a temperature where it might explode due to fast or slow “cook‐off”. Many of these systems are traditional low pressure water spray systems that are required by the

Grasping devices and methods in automated production processes

DEFF Research Database (Denmark)

Fantoni, Gualtiero; Santochi, Marco; Dini, Gino

2014-01-01

assembly to disassembly, from aerospace to food industry, from textile to logistics) are discussed. Finally, the most recent research is reviewed in order to introduce the new trends in grasping. They provide an outlook on the future of both grippers and robotic hands in automated production processes. (C......In automated production processes grasping devices and methods play a crucial role in the handling of many parts, components and products. This keynote paper starts with a classification of grasping phases, describes how different principles are adopted at different scales in different applications...

Managing Reverse Logistics or Reversing Logistics Management?

OpenAIRE

Brito, Marisa

2004-01-01

textabstractIn the past, supply chains were busy fine-tuning the logistics from raw material to the end customer. Today an increasing flow of products is going back in the chain. Thus, companies have to manage reverse logistics as well.This thesis contributes to a better understanding of reverse logistics. The thesis brings insights on reverse logistics decision-making and it lays down theoretical principles for reverse logistics as a research field.In particular it puts together a framework ...

Realtime Automation Networks in moVing industrial Environments

Directory of Open Access Journals (Sweden)

Rafael Leidinger

2012-04-01

Full Text Available The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT. For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conven-tional technologies of office automation are unsuitable and/or not manageable. The employment of mobile ser-vices in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solu-tions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and develop-ment of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network [1].

76 FR 60463 - 36(b)(1) Arms Sales Notification

Science.gov (United States)

2011-09-29

... elements of logistics support. The estimated cost is $5.3 billion. This sale is consistent with United...; and HAVE GLASS II applications. Also included are: ammunition, alternate mission equipment... logistics support, test equipment, site surveys, and other related elements of logistics support. (iv...

Comprehensive Logistics

CERN Document Server

Gudehus, Timm

2012-01-01

Modern logistics comprises operative logistics, analytical logistics and management of logistic networks. Central task of operative logistics is the efficient supply of required goods at the right place within the right time. Tasks of analytical logistics are designing optimal networks and systems, developing strategies for planning, scheduling and operation, and organizing efficient order and performance processes. Logistic management plans, implements and operates logistic networks and schedules orders, stocks and resources. This reference-book offers a unique survey of modern logistics. It contains proven strategies, rules and tools for the solution of a multitude of logistic problems. The analytically derived algorithms and formulas can be used for the computer-based planning of logistic systems and for the dynamic scheduling of orders and resources in supply networks. They enable significant improvements of performance, quality and costs. Their application is demonstrated by several examples from industr...

Education in logistics and training of non-logistic personnel

Directory of Open Access Journals (Sweden)

Marko D. Andrejić

2011-01-01

Full Text Available The significance of education in logistics and education and training of cadets who belong to non-logistic services (non-logistic personnel will be presented. The logistical aspects of education of non-logistic personnel are elaborated as well as the knowledge in the area of logistics which is necessary to be transferred through the educational process to non-logistic personnel for the successful accomplishment of their functional duties. A general approach and the methods of logistics education and improvement of non-logistic personnel are presented as well as the institutional prerequisites necessary for improving the quality of logistics education and training. The quality of the knowledge in this area and its implementation into the methods of thinking and decision making of non-logistic personnel affect the cooperation between the non-logistic and the logistic personnel, directly contributing to the quality of life and working conditions of units and institutions as well as to the quality and synergy in task accomplishments in the framework defined by the missions of the Army of Serbia. The necessary content and means of its transfer to cadets are discussed since they are supposed to be available at all levels and forms of education, depending on the previous cadet education levels. The theoretical bases and experiences shown are of general character and they have a universal application in the process of education. Introduction In our recent defense theory and operational practice, logistics education of non-logistic personnel is not sufficiently analyzed either in organizational or technological aspects, considering the concept and the logic of a systematic and a situational approach. The analysis of the experiences gained from operational practice shows a slight decrease in the quality of task accomplishment due to the lack of necessary logistic knowledge and habits as well as an increased communication gap between logistic and non-logistic

Demolition Range Noise Abatement Technique Demonstration and Evaluation for the McAlester Army Ammunition Plant; TOPICAL

International Nuclear Information System (INIS)

CALDERONE, JAMES J.; GARBIN H, DOUGLAS

2001-01-01

Public concern regarding the effects of noise generated by the detonation of excess and obsolete explosive munitions at U.S. Army demolition ranges is a continuing issue for the Army's demilitarization and disposal groups. Recent concerns of citizens living near the McAlester Army Ammunition Plant (MCAAP) in Oklahoma have lead the U.S. Army Defense Ammunition Center (DAC) to conduct a demonstration and evaluation of noise abatement techniques that could be applied to the MCAAP demolition range. With the support of the DAC, MCAAP, and Sandia National Laboratories (SNL), three types of noise abatement techniques were applied: aqueous foams, overburden (using combinations of sand beds and dirt coverings), and rubber or steel blast mats. Eight test configurations were studied and twenty-four experiments were conducted on the MCAAP demolition range in July of 2000. Instrumentation and data acquisition systems were fielded for the collection of near-field blast pressures, far-field acoustic pressures, plant boundary seismic signals, and demolition range meteorological conditions. The resulting data has been analyzed and reported, and a ranking of each technique's effects has been provided to the DAC

Relationship Between Green Logistics Tendency and Logistics Performance: A Comparative Case Study on Logistics Service Providers

OpenAIRE

Ayşenur DOĞRU; Cemile SOLAK FIŞKIN

2016-01-01

Increasing concerns related to environmental side effects of the logistics services and competition between the logistics service providers are two pressuring factors on logistics service providers. This study seeks to explore the relation between green logistics tendency and logistic performance from the perspective of logistics service providers. In order to reach this aim, two logistics service providers are investigated by comparative case study method. Findings showed the effects of g...

The Automated Aircraft Rework System (AARS): A system integration approach

Science.gov (United States)

Benoit, Michael J.

1994-01-01

The Mercer Engineering Research Center (MERC), under contract to the United States Air Force (USAF) since 1989, has been actively involved in providing the Warner Robins Air Logistics Center (WR-ALC) with a robotic workcell designed to perform rework automated defastening and hole location/transfer operations on F-15 wings. This paper describes the activities required to develop and implement this workcell, known as the Automated Aircraft Rework System (AARS). AARS is scheduled to be completely installed and in operation at WR-ALC by September 1994.

Analysis and Design Information System Logistics Delivery Service in Pt Repex Wahana

Directory of Open Access Journals (Sweden)

Stephanie Surja

2015-12-01

Full Text Available Analysis and Design of Logistic Delivery System in PT Repex Wahana aims to analyze company’s need in existing business process of logistic delivery service. This will then be used in the development of an integrated system that can address the problems in the running process of sending and tracking the whereaboutsor status of the delivered goods which are the core business processes in the enterprise. The result then will be used as basis in the development of integrated information system in pursuit of corporate solution for process business automation, delivery process, inventory, and logistic delivery tracking, which is the core of the company business process, and it will be documented using Unified Modeling Language. The information system is meant to simplify the delivery and tracking process in the company, besides will minimize lost and error of data which is often happened because of the manual and unorganized transaction data processing.

Expert system for minimising the cost of logistic processes

Directory of Open Access Journals (Sweden)

Bohumil Hlavenka

2002-01-01

Full Text Available This paper demonstrates how to use the theory of causal position in practice for evaluation, systematic design, mechanization and automation in logistic processes namely in manipulation with material. For a broader usage of this complicated theory we started designing an expert system „KAUZA – X“, which will be easy to operate even for non expert. The theoretical bases of a system are: the systems approach (Logistic system is made up of a set of elements and relationships. and the theory of cauzal position (The cause of the motion of an object lies in the types of its position and in the relationships between them. The properties of the object and its utilization result in individual positions, which form a continual chain in space and are technically and organizationally interrelated. For each of many linkages, there is a process of searching for the rationality of technical – economic optimums.

The system of account and control of logistics costs

Directory of Open Access Journals (Sweden)

Khayrullin Rustam Zinnatullovich

Full Text Available The process of organization of civil engineering provides the delivery of construction materials, equipment to the civil engineering objects in the required quantities at the specified time. Effective tool for solving this problem is logistics. The basic components of logistics costs, which occupy the largest share in the sum of all logistics costs, are transportation costs and storage costs. The civil engineering industry is very promising for the use of outsourcing. The main part of works on providing material and technical resources in most cases is transferred to the outsourcing of other companies, including the group of companies forming the holding. In large holding companies the chain of movement of materials, goods and productions: purchase of materials and goods, completion materials, production structures, storage, movement, transportation, etc. may include several companies belonging in holding. The goods can be moved from one warehouse to another, with or without change of the owner of goods. Each company is obliged to show each movement of goods in their financial accounting. During the goods’ movement within a group of companies from one storage to another, from one owner to another, the total costs of the goods rise. Sales within a group of companies lead, as a rule, to a gain by one of the companies and the logistic expenses of another company. Selling to a consumer provides a profit to the seller company. Therefore, the problem of adequate allocation of logistics expenses and profits between separate legal entity and the task of continuous accounting and control of logistics costs and earnings in large companies, is vital. The automated system for accounting and controlling of logistics costs is suggested. The developed system allows controlling logistics costs of refining, storage and transportation for each ton, pieces, linear or square meters of the shipped cargoes. The System is based on complex algorithms of distribution

Logistics and logistics support in crisis management and citizen protection

OpenAIRE

HOLEJŠOVSKÝ, Jan

2010-01-01

ABSTRAKT LOGISTICS AND LOGISTICS SUPPORT IN CRISIS MANAGEMENT AND CITIZEN PROTECTION The graduation thesis on topic "Logistics and logistics support in crisis management and citizen protection" is divided into several chapters, which in summary are a material presenting information about logistics and logistics support in crisis management and citizen protection. This was one of the aims at this work. Chapters I., II., III., IV. describe logistics and logistics support, crisis management, cit...

Automated Transportation Management System (ATMS) user's manual. Revision 1

International Nuclear Information System (INIS)

Smith, P.D.

1994-01-01

The Automated Transportation Management System (ATMS) Software User Guide (SUG) constitutes the user procedures for the ATMS System. Information in this document will be used by the user to operate the automated system. It is intended to be used as a reference manual to guide and direct the user(s) through the ATMS software product and its environment. The objectives of ATMS are as follows: to better support the Procurement function with freight rate information; to free Transportation Logistics personnel from routine activities such as the auditing and input of freight billing information; to comply with Headquarters Department of Energy-Inspector General (DOE-IG) audit findings to automate transportation management functions; to reduce the keying of data into the Shipment Mobility Accountability Collection (SMAC) database; and to provide automation for the preparing of Bill of Lading, Declaration of Dangerous Goods, Emergency Response Guide and shipping Labels using HM181 Retrieval of hazardous material table text information

Planning and control of automated material handling systems: The merge module

NARCIS (Netherlands)

Haneyah, S.W.A.; Hurink, Johann L.; Schutten, Johannes M.J.; Zijm, Willem H.M.; Schuur, Peter; Hu, Bo; Morasch, Karl; Pickl, Stefan; Siegle, Markus

2011-01-01

We address the field of internal logistics, embodied in Automated Material Handling Systems (AMHSs), which are complex installations employed in sectors such as Baggage Handling, Physical Distribution, and Parcel & Postal. We work on designing an integral planning and real-time control architecture,

Warehouse Logistics

OpenAIRE

Panibratetc, Anastasiia

2015-01-01

This research is a review of warehouse logistics on the example of Kannustalo Oy, located in Kannus, Western region of Finland. Kannustalo is an international company of designing, manufacturing and assembling block and turn-key houses. The research subject is logistics process in warehouse system of industrial company. In my work I discussed about theoretical aspect of logistics, logistic functions and processes. Later I considered warehouse as a part of logistics system and provided inf...

Research on the Logistics Supply Chain in Port Logistics Transportation

OpenAIRE

Wang Yan-liang

2013-01-01

The aim of this study is to improve and increase the logistics system effectiveness and to solve the problem of optimal movement of different flows. Logistics transport carrying the world on material resources transfer exchange important mission and economic development and our lives are closely linked, logistics chain logistics transport occupies an important position and in the e logistics chain in port logistics has play a decisive role. For many coastal countries port logistics is the eco...

HOW TO JUSTIFY AUTOMATION PROJECTS

OpenAIRE

Velásquez C., José

2014-01-01

This article deals with an Automation Project development. Important aspects with regard to its financial advantages are shown, with the purpose of knowing about the savings engaging a variety of areas within an enterprise, such as security, quality, marketing and logistics. El artículo trata sobre el desarrollo de un proyecto de automatización, se muestran aspectos importantes para su justificación económica, a fin de conocer los ahorros que pueden darse en distintas áreas de la empresa c...

Empirical Study of E-logistics System Based on Tibet Logistics Industry

OpenAIRE

Liu, Yu

2013-01-01

With the rapid growth of E-logistics in the global logistics industry, it is important to get insight into E-logistics system in Chinese logistics industry. Regarding the current situation of E-logistics of Chinese logistics industry, there are still many problems to be concerned and resolved. This paper will review the concepts and theoretical background of E-logistics System from previous researches. After acknowledging the essential issues on E-logistics System, a research model is designe...

Indices system design of distribution logistics, transport logistics and materials flow as parts of controlling in enterprise´s logistics

Directory of Open Access Journals (Sweden)

Andrea Rosová

2010-02-01

Full Text Available There is necessary to think about two aspects while applying controlling in logistics. The main aim of the logistics in relationto business economics is assessing support to the invested financial capital resources – it is the first aspect. The second one is basedon the target of controlling – continuous monitoring of company’s economy. In order to make a logistics controlling successful and withrequired results it is necessary to utilize any logistics controlling tools. One of the tools in logistics controlling is a set of indicators.Important part of controlling logistics system is monitoring and evaluation of logistics markers. Logistic markers representsynthetic view to logistic performance and logistic costs by the means of interaction rate so that it can evaluate logistic activities area,cost economy and final productivity of logistics activities in company.This contribution deals with markers system proposal of distribution logistics, transport logistics and materials flow control.System of markers is designed with regard to basic facilities and specifications, who has to copy character and disposition rememberedsubsystems enterprise’s logistics system.

Development of a hospital mobile platform for logistics tasks

Directory of Open Access Journals (Sweden)

Carlos Antonio Acosta Calderon

2015-04-01

Full Text Available Healthcare services heavily rely on healthcare staff and subsequently, there is the need to improve healthcare staff׳s workflow. The deployment of an automated mobile base will help enhance the productivity of logistics tasks in the hospital, like collection and delivery. By improving such logistic tasks healthcare personal is able to focus on other tasks to serve the community better. Currently there are commercial solutions to deal with these logistic tasks, where a mobile base is able to move from one place to another in a structured environment like a hospital. In this paper, we present our approach to develop a cost effective mobile base to be used for delivery in healthcare amenities. The proposed approach is able to navigate among stations in the hospital by first creating a map of the floor and then indicating the location of these stations. This reduces the additional cost of drawing lines on the floor or to put laser markers and many of the commercial solutions required. In addition, the proposed solution is able to navigate while being safe for the people moving around and to the transported items. The paper discusses the design consideration of the system, the navigation and the battery management to ensure that the system is able to run autonomously without the need recharge often.

Reverse Logistics

OpenAIRE

Kulikova, Olga

2016-01-01

This thesis was focused on the analysis of the concept of reverse logistics and actual reverse processes which are implemented in mining industry and finding solutions for the optimization of reverse logistics in this sphere. The objective of this paper was the assessment of the development of reverse logistics in mining industry on the example of potash production. The theoretical part was based on reverse logistics and mining waste related literature and provided foundations for further...

Independent Auditors Report on the Attestation of the Existence, Completeness, and Rights of Select Army-Held Operating Materials and SuppliesAmmunition

Science.gov (United States)

2015-08-28

secured as if it were live ammunition (for example, rocket and missile launcher tubes). 8 │ DODIG-2015-165 DODIG-2015-165 │ 9 Appendix Existence... Liaison congressional@dodig.mil; 703.604.8324 Media Contact public.affairs@dodig.mil; 703.604.8324 Monthly Update dodigconnect-request@listserve.com

Logistics Reduction: RFID Enabled Autonomous Logistics Management (REALM)

Data.gov (United States)

National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Logistics Reduction (LR) project Radio-frequency identification (RFID) Enabled Autonomous Logistics Management (REALM) task...

Relationship Between Logistics Service's Perceived Value and Outsourcing of Logistics Activities

Directory of Open Access Journals (Sweden)

Klavdij Logožar

2006-07-01

Full Text Available Outsourcing has become increasingly popular in recentyears, and is often quoted as a means of coping with rapidchanges in technology and in the business environment. Thescope of third -party logistics may range from a relatively limitedcombination of activities (e. g. transportation and warehousingto a comprehensive set of logistics services. The authorsfirst define the reasons for outsourcing with the emphasis onbusiness logistics. They particularly point out the motivationsfor logistics outsourcing, the possibilities of logistics outsourcing,and they present the process of outsourcing partner selectionas well. Finally, they analyze the specific issues of logisticsservice's perceived value in outsourcing logistics activities onthe basis of the survey carried out in Slovenian companies. Thepurpose of the survey was to measure the customers' perceptionof different characteristics of logistics provider which can be decisivewhen manufacturing firms are trying to make a decisionwhether to outsource and which logistics provider to select. Thepaper creates a framework for the selection of the importantand perceived characteristics of logistics provider relevant tocustomer in the process of the logistics supplier selection.

Logistic chain modelling

NARCIS (Netherlands)

Slats, P.A.; Bhola, B.; Evers, J.J.M.; Dijkhuizen, G.

1995-01-01

Logistic chain modelling is very important in improving the overall performance of the total logistic chain. Logistic models provide support for a large range of applications, such as analysing bottlenecks, improving customer service, configuring new logistic chains and adapting existing chains to

Managing Reverse Logistics or Reversing Logistics Management?

NARCIS (Netherlands)

M.P. de Brito (Marisa)

2004-01-01

textabstractIn the past, supply chains were busy fine-tuning the logistics from raw material to the end customer. Today an increasing flow of products is going back in the chain. Thus, companies have to manage reverse logistics as well.This thesis contributes to a better understanding of reverse

[Injury patterns and roentgen findings in gunshot wounds with rare flint ammunition].

Science.gov (United States)

Pollak, S; Lindermann, A

1990-01-01

Smoothbore shotgun barrels can fire cartridges with common pellet loads as well as shotgun slugs and rubber bullets. Other than conventional shot, the cylindrical Brenneke-type rifled shotgun slugs sometimes cause perforating wounds. The shotgun ammunition for use in self-defence can have a single projectile or several rubber pellets. Where the propellant is black powder, short range shots will probably leave searing marks and intensive soot deposits. Fired at close range, rubber bullets can penetrate through the skin into the body, fired at greater distance they cause contusions. A case of homicide (repeated firing with a 12-ga. pump gun) is used to present and discuss the injury patterns and X-ray findings after impact of Brenneke-type slugs and rubber bullets as well as of "classical" shot pellets.

Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition

OpenAIRE

Olgierd Janusz Goroch; Zbigniew Gulbinowicz

2017-01-01

The results of studies concerning friction welding of Weight Heavy Alloy (WHA) with AlMg3 alloy are presented. The friction welding of density 17,5 Mg/m3 with aluminum alloy showed that it is possible to reach the joints with the strength exceeding the yield strength of wrought AlMg3 alloy. This strength looks to be promising from point of view of condition which have to be fulfilled in case of armor subcaliber ammunition, where WHA rods play the role Kinetic Energy Penetrators and aluminum i...

Complex logistics audit system

Directory of Open Access Journals (Sweden)

Zuzana Marková

2010-02-01

Full Text Available Complex logistics audit system is a tool for realization of logistical audit in the company. The current methods for logistics auditare based on “ad hok” analysis of logisticsl system. This paper describes system for complex logistics audit. It is a global diagnosticsof logistics processes and functions of enterprise. The goal of logistics audit is to provide comparative documentation for managementabout state of logistics in company and to show the potential of logistics changes in order to achieve more effective companyperformance.

A note on Verhulst's logistic equation and related logistic maps

International Nuclear Information System (INIS)

Gutierrez, M Ranferi; Reyes, M A; Rosu, H C

2010-01-01

We consider the Verhulst logistic equation and a couple of forms of the corresponding logistic maps. For the case of the logistic equation we show that using the general Riccati solution only changes the initial conditions of the equation. Next, we consider two forms of corresponding logistic maps reporting the following results. For the map x n+1 = rx n (1 - x n ) we propose a new way to write the solution for r = -2 which allows better precision of the iterative terms, while for the map x n+1 - x n = rx n (1 - x n+1 ) we show that it behaves identically to the logistic equation from the standpoint of the general Riccati solution, which is also provided herein for any value of the parameter r.

LOGISTICS OPTIMIZATION USING ONTOLOGIES

OpenAIRE

Hendi , Hayder; Ahmad , Adeel; Bouneffa , Mourad; Fonlupt , Cyril

2014-01-01

International audience; Logistics processes involve complex physical flows and integration of different elements. It is widely observed that the uncontrolled processes can decline the state of logistics. The optimization of logistic processes can support the desired growth and consistent continuity of logistics. In this paper, we present a software framework for logistic processes optimization. It primarily defines logistic ontologies and then optimize them. It intends to assist the design of...

Toward sustainable logistics

NARCIS (Netherlands)

Soysal, Mehmet; Bloemhof-Ruwaard, Jacqueline M.

2017-01-01

The fast evolution of sustainability leads to the development of a new fast-growing concept called sustainable logistics management. This research addresses recent business trends and challenges in logistics and their implications for sustainable logistics management. Additionally, we discuss policy

Toward sustainable logistics

NARCIS (Netherlands)

Soysal, Mehmet; Bloemhof-Ruwaard, Jacqueline M.

2018-01-01

The fast evolution of sustainability leads to the development of a new fast-growing concept called sustainable logistics management. This research addresses recent business trends and challenges in logistics and their implications for sustainable logistics management. Additionally, we discuss policy

The Relationship between Logistics Sophistication and Drivers of the Outsourcing of Logistics Activities

Directory of Open Access Journals (Sweden)

Peter Wanke

2008-10-01

Full Text Available A strong link has been established between operational excellence and the degree of sophistication of logistics organization, a function of factors such as performance monitoring, investment in Information Technology [IT] and the formalization of logistics organization, as proposed in the Bowersox, Daugherty, Dröge, Germain and Rogers (1992 Leading Edge model. At the same time, shippers have been increasingly outsourcing their logistics activities to third party providers. This paper, based on a survey with large Brazilian shippers, addresses a gap in the literature by investigating the relationship between dimensions of logistics organization sophistication and drivers of logistics outsourcing. To this end, the dimensions behind the logistics sophistication construct were first investigated. Results from factor analysis led to the identification of six dimensions of logistics sophistication. By means of multivariate logistical regression analyses it was possible to relate some of these dimensions, such as the formalization of the logistics organization, to certain drivers of the outsourcing of logistics activities of Brazilian shippers, such as cost savings. These results indicate the possibility of segmenting shippers according to characteristics of their logistics organization, which may be particularly useful to logistics service providers.

Large scale identification and categorization of protein sequences using structured logistic regression

DEFF Research Database (Denmark)

Pedersen, Bjørn Panella; Ifrim, Georgiana; Liboriussen, Poul

2014-01-01

Abstract Background Structured Logistic Regression (SLR) is a newly developed machine learning tool first proposed in the context of text categorization. Current availability of extensive protein sequence databases calls for an automated method to reliably classify sequences and SLR seems well...... problem. Results Using SLR, we have built classifiers to identify and automatically categorize P-type ATPases into one of 11 pre-defined classes. The SLR-classifiers are compared to a Hidden Markov Model approach and shown to be highly accurate and scalable. Representing the bulk of currently known...... for further biochemical characterization and structural analysis....

Management of Logistics Planning

OpenAIRE

Bjørnar Aas; Stein W. Wallace

2010-01-01

Logistics problems are gradually becoming more complex and a better understanding of logistics management as a subject is a key to deal with the new challenges. A core element of logistics management is logistics planning, which substitutes for low customer service levels, high waste, and the use of buffers and slacks in the execution of logistic activities. Furthermore, the availability of information and problem-solving capabilities are established as the core parts of logistics planning. B...

Logistics strategic decisions

NARCIS (Netherlands)

Steadie Seifi, M.; Farahani, R.Z.; Rezapour, S.; Kardar, L.

2011-01-01

Logistics has an important economic role because it swallows the biggest part of capital and supports the flow and movement of many economic transactions. Therefore, designing the best logistics strategies is vital. In this chapter, we take a look at different kinds of logistics decisions,

Characterization of airborne uranium from test firing of XM774 ammunition

International Nuclear Information System (INIS)

Glissmeyer, J.A.; Mishima, J.

1979-11-01

Pacific Northwest Laboratory conducted experiments at Aberdeen Proving Grounds, Maryland, to characterize the airborne depleted uranium (DU) resulting from the test firings of 105-mm, APFSDS-T XM774 ammunition. The goal was to obtain data pertinent to evaluations of human inhalation exposure to the airborne DU. Data was desired concerning the following: (1) size distribution of airborne DU; (2) quantity of airborne DU; (3) dispersion of airborne DU from the target vicinity; (4) amount of DU deposited on the ground; (5) solubility of airborne DU compounds in lung fluid; and (6) oxide forms of airborne and fallout DU. The experiments involved extensive air sampling for total airborne DU particulates and respirable DU particles both above the targets and at distances downwind. Fallout and fragments were collected around the target area. High-speed movies of the smoke generated from the impact of the penetrators were taken to estimate the cloud volumes. Results of the experiments are presented

Logistical Worlds

Directory of Open Access Journals (Sweden)

Ned Rossiter

2014-03-01

Full Text Available As the managerial art and science of coordinating the movement of people, finance and things, logistical operations are central to contemporary capital. Despite its materiality in the form of communications and transport infrastructure, logistics remains an abstract machine for many. This is largely due to the compartmental structure of global supply chains and the invisibility of code. In registering the mediating force of logistics, the essay considers parametric politics as an architecture of intervention for both game design and software development. There are implications here not only for gameplay, but also the invention of method and governance of labour. How, for instance, might game design facilitate the production of a political knowledge of logistics? This becomes a matter to address for labour power vis-à-vis collective research on infrastructure, software and global supply chains.

Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition

Directory of Open Access Journals (Sweden)

Olgierd Janusz Goroch

2017-12-01

Full Text Available The results of studies concerning friction welding of Weight Heavy Alloy (WHA with AlMg3 alloy are presented. The friction welding of density 17,5 Mg/m3 with aluminum alloy showed that it is possible to reach the joints with the strength exceeding the yield strength of wrought AlMg3 alloy. This strength looks to be promising from point of view of condition which have to be fulfilled in case of armor subcaliber ammunition, where WHA rods play the role Kinetic Energy Penetrators and aluminum is used for projectile ballistic cup.

Regional logistics land allocation policies: stimulating spatial concentration of logistics firms

NARCIS (Netherlands)

Heuvel, van den F.P.; Langen, de P.W.; Donselaar, van K.H.; Fransoo, J.C.

2013-01-01

Although spatial concentration of logistics firms in logistics concentration areas can be beneficial for society at large, there is not much research on the relationship between land allocation policies and logistics concentration areas. This paper analyzes land allocation policies by means of a

Regional logistics land allocation policies : stimulating spatial concentration of logistics firms

NARCIS (Netherlands)

Heuvel, van den F.P.; Langen, de P.W.; Donselaar, van K.H.; Fransoo, J.C.

2013-01-01

Although spatial concentration of logistics firms in logistics concentration areas can be beneficial for society at large, there is not much research on the relationship between land allocation policies and logistics concentration areas. This paper analyzes land allocation policies by means of a

Logistics of Materials Flow in an Iron Foundry

Directory of Open Access Journals (Sweden)

Kukla S.

2013-09-01

Full Text Available The article presents issues related to creating and realizing added value by logistic processes and processing in a casting enterprise. It discusses possibilities of improving systems of casts production by evaluating labour intensity of casts manufacture and analyzing manufacturing prime costs. Operations with added value, processes indirectly creating added value and operations without added value have been specified. The problem was presented on the example of materials flow design in a foundry, where casts are manufactured in expendable moulds and using automated foundry lines. On the basis of the Pareto analysis, a group of casts was specified whose manufacture significantly influences the functioning of the whole enterprise. Finishing treatment operations have been particularly underlined, as they are performed away from the line and are among the most labour-consuming processes during casts production.

Management and logistics

OpenAIRE

Jereb, Borut; Drašković, Mimo; Gorenak, Irena; Bauk, Sanja; Fošner, Maja; Rosi, Bojan; Pupavac, Drago; Topolšek, Darja; Dorokhov, Oleksandr; Kramar, Uroš; Ivanović, Željko; Sternad, Marjan; Knez, Matjaž; Mlaker Kač, Sonja; Malyaretz, Ludmila

2018-01-01

The scientific monograph titled Logistics and Management – selected topics is the result of a bilateral project, lasting from 2013 to 2015 and titled “Preparation of a joint scientific monograph in the field of logistics and management issued at the Faculty of Logistics in Celje and the Maritime Faculty of Kotor”. The project was managed by Professor Maja Fošner, PhD, from the Faculty of Logistics at the University of Maribor, and Professor Veselin Draskovic, PdD, from the Maritime Faculty of...

Improving Healthcare Logistics Processes

DEFF Research Database (Denmark)

Feibert, Diana Cordes

logistics processes in hospitals and aims to provide theoretically and empirically based evidence for improving these processes to both expand the knowledge base of healthcare logistics and provide a decision tool for hospital logistics managers to improve their processes. Case studies were conducted...... processes. Furthermore, a method for benchmarking healthcare logistics processes was developed. Finally, a theoretically and empirically founded framework was developed to support managers in making an informed decision on how to improve healthcare logistics processes. This study contributes to the limited...... literature concerned with the improvement of logistics processes in hospitals. Furthermore, the developed framework provides guidance for logistics managers in hospitals on how to improve their processes given the circumstances in which they operate....

Smart logistics

NARCIS (Netherlands)

Woensel, van T.

2012-01-01

This lecture focuses on Smart Logistics referring to these intelligent managerial decisions related to the design, operations and control of the transportation chain processes in an efficient and cost-effective way. The starting point for Smart Logistics is the key observation that the real-life

Drilling Automation Demonstrations in Subsurface Exploration for Astrobiology

Science.gov (United States)

Glass, Brian; Cannon, H.; Lee, P.; Hanagud, S.; Davis, K.

2006-01-01

This project proposes to study subsurface permafrost microbial habitats at a relevant Arctic Mars-analog site (Haughton Crater, Devon Island, Canada) while developing and maturing the subsurface drilling and drilling automation technologies that will be required by post-2010 missions. It builds on earlier drilling technology projects to add permafrost and ice-drilling capabilities to 5m with a lightweight drill that will be automatically monitored and controlled in-situ. Frozen cores obtained with this drill under sterilized protocols will be used in testing three hypotheses pertaining to near-surface physical geology and ground H2O ice distribution, viewed as a habitat for microbial life in subsurface ice and ice-consolidated sediments. Automation technologies employed will demonstrate hands-off diagnostics and drill control, using novel vibrational dynamical analysis methods and model-based reasoning to monitor and identify drilling fault states before and during faults. Three field deployments, to a Mars-analog site with frozen impact crater fallback breccia, will support science goals, provide a rigorous test of drilling automation and lightweight permafrost drilling, and leverage past experience with the field site s particular logistics.

Going the Extra Mile: Enabling Joint Logistics for the Tactical War Fighter

Science.gov (United States)

2010-05-04

few of the links when relocating hubs. Chains v. Networks Supply Chain Too brittle , long CPL, low clustering, simple pattern, simple control...Mass Service Perspective Efficiency Highly Optimized Brittle , Rigid Supply Chains vs Networked Cross-Service Mutual Support Cross-Enterprise...Storage and Distribution Centei\\" Army Logistician 39, no. 6 (November-December 2007): 40. 68 Glen R Dowling, "Army and Marine Joint Ammunition

Computational Logistics

DEFF Research Database (Denmark)

Pacino, Dario; Voss, Stefan; Jensen, Rune Møller

2013-01-01

This book constitutes the refereed proceedings of the 4th International Conference on Computational Logistics, ICCL 2013, held in Copenhagen, Denmark, in September 2013. The 19 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They are organized in to...... in topical sections named: maritime shipping, road transport, vehicle routing problems, aviation applications, and logistics and supply chain management.......This book constitutes the refereed proceedings of the 4th International Conference on Computational Logistics, ICCL 2013, held in Copenhagen, Denmark, in September 2013. The 19 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They are organized...

Computational Logistics

DEFF Research Database (Denmark)

This book constitutes the refereed proceedings of the 4th International Conference on Computational Logistics, ICCL 2013, held in Copenhagen, Denmark, in September 2013. The 19 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They are organized in to...... in topical sections named: maritime shipping, road transport, vehicle routing problems, aviation applications, and logistics and supply chain management.......This book constitutes the refereed proceedings of the 4th International Conference on Computational Logistics, ICCL 2013, held in Copenhagen, Denmark, in September 2013. The 19 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They are organized...

Logistics, Multimodal, and Shipper Partner 2.0.15 Tools: Guide to Importing Carrier Data Using the Outside Data Import Function 2015 Data Year - United States Version

Science.gov (United States)

This document provides guidance for Logistics, Multi-modal, and Shippers on how to use outside data collection systems to populate the SmartWay tools carrier data and activity sections using an automated method. (EPA publication # EPA-420-B-16-057a)

Strategies for dispatching AGVs at automated seaport container terminals

DEFF Research Database (Denmark)

Grunow, Martin; Günther, H.O.; Lehmann, M.

2006-01-01

Control of logistics operations at container terminals is an extremely complex task, especially if automated guided vehicles (AGVs) are employed. In AGV dispatching, the stochastic nature of the handling systems must be taken into account. For instance, handling times of quay and stacking cranes...... as well as release times of transportation orders are not exactly known in advance. We present a simulation study of AGV dispatching strategies in a seaport container terminal, where AGVs can be used in single or dual-carrier mode. The latter allows transporting two small-sized (20 ft) or one large......-line heuristic. The performance of the dispatching strategies is evaluated using a scalable simulation model. The design of the experimental study reflects conditions which are typical of a real automated terminal environment. Major experimental factors are the size of the terminal and the degree of stochastic...

Strategies for dispatching AGV's at automated seaport container terminals

DEFF Research Database (Denmark)

Grunow, Martin; Günther, H.O.; Lehmann, M.

2007-01-01

Control of logistics operations at container terminals is an extremely complex task, especially if automated guided vehicles (AGVs) are employed. In AGV dispatching, the stochastic nature of the handling systems must be taken into account. For instance, handling times of quay and stacking cranes...... as well as release times of transportation orders are not exactly known in advance. We present a simulation study of AGV dispatching strategies in a seaport container terminal, where AGVs can be used in single or dual-carrier mode. The latter allows transporting two small-sized (20 ft) or one large......-line heuristic. The performance of the dispatching strategies is evaluated using a scalable simulation model. The design of the experimental study reflects conditions which are typical of a real automated terminal environment. Major experimental factors are the size of the terminal and the degree of stochastic...

Logistics costs of the enterprise

Directory of Open Access Journals (Sweden)

Andrea Rosová

2007-06-01

Full Text Available The article describe a problem of specification and systematization of enterprise’s logistics costs. With in a growing division of labour, also logistics costs increase their part in enterprises total costs.Almost all decisions about products and production in general, influence logistics processes even logistics costs and performances.In present is not clear enough, which of the cost-particles are relevant fot logistics costs, because some of logistics cost-particles accounts within overhead are charged together with costs of other sorts.Substantive step in the process of the monitoring and evidence of logistics costs is definition of this, that costs of enterprise´s processes will be inclusive in logistics costs and determining points of contact with the others departments (acquisition, production, sale etc.. After the specification of meditation processes, there is a need to choose applicable parameters for the expression of logistics performances. Besides logistics costs is needed to know logistics performances equivalent herewith at a cost of, therefore from the control side have for enterprise bigger value indices expressive correlation costs and performances(e.g. share of logistics unit costs performance.At the proposal and evidence of logistics costs and performances is needed consistently entertain an individual conditions of enterprise. Because the area of processes included strongly affects the size of account logistics costs and its share part in total costs of enterprise. Logistics costs are flow line between economy and logistics of the enterprise.

Logistics in Estonian business companies

Directory of Open Access Journals (Sweden)

A. Kiisler

2008-12-01

Full Text Available The article describes logistics survey in Estonia carried out in 2007 as a part of the LogOnBaltic project. The level of logistics in Estonian manufacturing, trading and logistics companies is explored through logistics costs, performance indicators, outsourcing, ICT use and logistics self-estimation of the companies responded. Responses from 186 Estonian companies were gathered through a web-based survey (38% of manufacturing, 38% of trading and 24% of logistics sector. Logistics costs as the percentage of turnover make in average 13.8% in manufacturing and 13.3% in trading. Transportation and inventory carrying cost form around 70% of overall logistics costs. Considering the logistics indicators surveyed, Estonian companies show up with relatively low perfect order fulfillment rates, short customer order fulfillment cycles and effective management of cash flows. The most widely outsourced logistics function is international transportation followed by domestic transportation, freight forwarding and reverse logistics. By 2010, the outsourcing of IT systems in logistics followed by inventory management, warehousing and product customization is expected to increase more substantially. The awareness of logistics importance is still low among Estonian companies. Only 27–44% of those agree that logistics has a considerable impact on profitability, competitive advantage, top management or customer service level.

78 FR 2440 - Agency Information Collection Activities: Proposed Collection; Comments Requested; Application To...

Science.gov (United States)

2013-01-11

... through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses... importing a firearm or firearms, ammunition, and the implements of war, and to facilitate the collection of...

Radioactivity of drinking waters from regions exposed to depleted uranium ammunition bombing in 2003 end 2004

International Nuclear Information System (INIS)

Tanaskovic, I.; Pantelic, G.; Vuletic, V.; Eremic Savkovic, M.; Javorina, L.J.

2006-01-01

Due to the military application of the depleted uranium in our country, the problem of its radioactivity and hemo toxicity is actualized. The locations verified to be contaminated by depleted uranium ammunition were at the South part of Serbia (Pljackovica, Bratoselce, Borovac and Reljan). The soluble forms of uranium could translocated and dispersed from soils and sediments into surface waters and groundwater. The environmental presence of depleted uranium is considered as potential threat to human health. The study presents the results of radiological safety analysis of drinking water in 2003 and 2004. All samples were analyzed by gamma spectrometry and measurements of alpha and beta activity. (authors)

KSC ISS Logistics Support

Science.gov (United States)

Tellado, Joseph

2014-01-01

The presentation contains a status of KSC ISS Logistics Operations. It basically presents current top level ISS Logistics tasks being conducted at KSC, current International Partner activities, hardware processing flow focussing on late Stow operations, list of KSC Logistics POC's, and a backup list of Logistics launch site services. This presentation is being given at the annual International Space Station (ISS) Multi-lateral Logistics Maintenance Control Panel meeting to be held in Turin, Italy during the week of May 13-16. The presentatiuon content doesn't contain any potential lessons learned.

WAREOOUSE LOGISTICS MANAGEMENT

OpenAIRE

Drago Pupavac

2012-01-01

Warehouse Logistics Management involves the management of storage facilities and equipment, stock, employees and technology with the aim of efficient storage, accommodation, and distribution of goods and more importantly profitably. In conditions of economic crisis and lower inventory turns, logistics managers put emphasis on those measures as a function of storage logistics cost reductions that require minimal investment. Accordingly, the fundamental objective of this scientific paper is to ...

LOGISTICS - EVOLUTION THROUGH INNOVATION

Directory of Open Access Journals (Sweden)

Petrache Alexandru Constantin

2015-07-01

Full Text Available The current economic conditions, the rapidity with which the exchange of information, resources and products in the market takes place makes the logistics seem appreciably less significant. However, the importance of logistics has been presented in the military field, through strategies that have led to wining of the great wars that mankind has seen, through the supply of troops with food or moving military equipment. The literature in the field of logistics has numerous works on this topic. But while most focuses on efficient ways of carrying out the component activities of logistics or the strategies of organizations with regard to logistics or its functions, research on dynamics of logistics is underdeveloped. To be able to propose new methods or strategies of logistic activities is necessary to understand the development of this concept, determinant factors and economic and social conditions that gave rise to such developments. Thus, after a presentation of the main landmarks of the historical development of logistics we highlight the importance of the innovation within an organization's value chain innovation, in particular, and how to conduct the business in general. Using generations of innovation identified in the literature, we determine the generation of logistics development, taking into account innovation and how to conduct business. In addition for a better highlight of the own vision over the logistics generations identified, we will present the graphical concept for each generation in part. Last but not least, for each generation identified we try to allocate the chronological landmarks featured in order to reinforce the importance played by innovation in the development of the logistics industry and to give future directions of research within this topic. The study took into account the information presented in articles, books and websites of the relevant specialty in logistics and innovation to be able to build and expose a

MODERNIZATION OF LOGISTIC SYSTEMS OF THE FIRMS WITHIN THE CONTEXT OF GLOBAL ECONOMY

Directory of Open Access Journals (Sweden)

Mihaela Loredana LĂPĂDUŞI

2009-12-01

Full Text Available Modern technology, especially the technology based on computer science and automation offer the moderncompanies strategic resources to build the competition advantage. One of the best examples to obtain the competitionadvantage by using the automation systems in the case of logistic activities is given by the European, American andJapanese firms who on the background of using electronics and cybernetics in demands, the regional distributionmanagers have tried to satisfy the requirements of some regional clients. The leading teams in the above mentionedstates noticed the potential of this method and offered the necessary support and development funds to implement themat the level of the companies. The experience of modern firms, organizations and institutions in the domain of logisticshas demonstrated that there is greater and greater discrepancy between the possibilities offered by the moderntechnologies and their effective utilization by the companies. Many managers do not have the necessary expertise andexperience in the management of the modern technology and that why they have difficulties when they have to connectthe new strategic possibilities and the activity of their company.

78 FR 29381 - Agency Information Collection Activities: Proposed Collection; Comments Requested: Application...

Science.gov (United States)

2013-05-20

... for Importation of Firearms, Ammunition and Implements of War ACTION: 60-Day notice. The Department of... collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology...

75 FR 63860 - Agency Information Collection Activities: Proposed Collection; Comments Requested

Science.gov (United States)

2010-10-18

..., ammunition and Implements of War. The Department of Justice (DOJ), Bureau of Alcohol, Tobacco, Firearms and... collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology...

75 FR 79022 - Agency Information Collection Activities: Proposed Collection; Comments Requested

Science.gov (United States)

2010-12-17

... Ammunition and Implements of War. The Department of Justice (DOJ), Bureau of Alcohol, Tobacco, Firearms, and... those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting...

78 FR 43919 - Agency Information Collection Activities; Proposed Collection; Comments Requested: Application...

Science.gov (United States)

2013-07-22

... for Importation of Firearms, Ammunition and Implements of War ACTION: 60-Day Notice. The Department of... information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g...

77 FR 66634 - Agency Information Collection Activities: Proposed Collection; Comments Requested: Application To...

Science.gov (United States)

2012-11-06

... those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting... qualifies to engage in the business of importing a firearm or firearms, ammunition, and implements of war...

76 FR 70758 - Agency Information Collection Activities; Proposed Collection; Comments Requested; Records of...

Science.gov (United States)

2011-11-15

... and Disposition; Registered Importers of Arms, Ammunition and Implements of War on the U.S. Munitions... information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g...

75 FR 79020 - Agency Information Collection Activities: Proposed Collection; Comments Requested

Science.gov (United States)

2010-12-17

..., Ammunition and Implements of War. The Department of Justice (DOJ), Bureau of Alcohol, Tobacco, Firearms and... those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting...

Logistics Innovation Process Revisited

DEFF Research Database (Denmark)

Gammelgaard, Britta; Su, Shong-Iee Ivan; Yang, Su-Lan

2011-01-01

Purpose – The purpose of this paper is to learn more about logistics innovation processes and their implications for the focal organization as well as the supply chain, especially suppliers. Design/methodology/approach – The empirical basis of the study is a longitudinal action research project...... that was triggered by the practical needs of new ways of handling material flows of a hospital. This approach made it possible to revisit theory on logistics innovation process. Findings – Apart from the tangible benefits reported to the case hospital, five findings can be extracted from this study: the logistics...... innovation process model may include not just customers but also suppliers; logistics innovation in buyer-supplier relations may serve as an alternative to outsourcing; logistics innovation processes are dynamic and may improve supplier partnerships; logistics innovations in the supply chain are as dependent...

Total Logistic Plant Solutions

Directory of Open Access Journals (Sweden)

Dusan Dorcak

2016-02-01

Full Text Available The Total Logistics Plant Solutions, plant logistics system - TLPS, based on the philosophy of advanced control processes enables complex coordination of business processes and flows and the management and scheduling of production in the appropriate production plans and planning periods. Main attributes of TLPS is to create a comprehensive, multi-level, enterprise logistics information system, with a certain degree of intelligence, which accepts the latest science and research results in the field of production technology and logistics. Logistic model of company understands as a system of mutually transforming flows of materials, energy, information, finance, which is realized by chain activities and operations

A note on Verhulst's logistic equation and related logistic maps

Energy Technology Data Exchange (ETDEWEB)

Gutierrez, M Ranferi; Reyes, M A [Depto de Fisica, Universidad de Guanajuato, Apdo. Postal E143, 37150 Leon, Gto. (Mexico); Rosu, H C, E-mail: hcr@ipicyt.edu.m [IPICyT, Instituto Potosino de Investigacion Cientifica y Tecnologica, Apdo Postal 3-74 Tangamanga, 78231 San Luis PotosI (Mexico)

2010-05-21

We consider the Verhulst logistic equation and a couple of forms of the corresponding logistic maps. For the case of the logistic equation we show that using the general Riccati solution only changes the initial conditions of the equation. Next, we consider two forms of corresponding logistic maps reporting the following results. For the map x{sub n+1} = rx{sub n}(1 - x{sub n}) we propose a new way to write the solution for r = -2 which allows better precision of the iterative terms, while for the map x{sub n+1} - x{sub n} = rx{sub n}(1 - x{sub n+1}) we show that it behaves identically to the logistic equation from the standpoint of the general Riccati solution, which is also provided herein for any value of the parameter r.

Evaluating an Automated Number Series Item Generator Using Linear Logistic Test Models

Directory of Open Access Journals (Sweden)

Bao Sheng Loe

2018-04-01

Full Text Available This study investigates the item properties of a newly developed Automatic Number Series Item Generator (ANSIG. The foundation of the ANSIG is based on five hypothesised cognitive operators. Thirteen item models were developed using the numGen R package and eleven were evaluated in this study. The 16-item ICAR (International Cognitive Ability Resource1 short form ability test was used to evaluate construct validity. The Rasch Model and two Linear Logistic Test Model(s (LLTM were employed to estimate and predict the item parameters. Results indicate that a single factor determines the performance on tests composed of items generated by the ANSIG. Under the LLTM approach, all the cognitive operators were significant predictors of item difficulty. Moderate to high correlations were evident between the number series items and the ICAR test scores, with high correlation found for the ICAR Letter-Numeric-Series type items, suggesting adequate nomothetic span. Extended cognitive research is, nevertheless, essential for the automatic generation of an item pool with predictable psychometric properties.

Space Station fluid management logistics

Science.gov (United States)

Dominick, Sam M.

1990-01-01

Viewgraphs and discussion on space station fluid management logistics are presented. Topics covered include: fluid management logistics - issues for Space Station Freedom evolution; current fluid logistics approach; evolution of Space Station Freedom fluid resupply; launch vehicle evolution; ELV logistics system approach; logistics carrier configuration; expendable fluid/propellant carrier description; fluid carrier design concept; logistics carrier orbital operations; carrier operations at space station; summary/status of orbital fluid transfer techniques; Soviet progress tanker system; and Soviet propellant resupply system observations.

Altering user' acceptance of automation through prior automation exposure.

Science.gov (United States)

Bekier, Marek; Molesworth, Brett R C

2017-06-01

Air navigation service providers worldwide see increased use of automation as one solution to overcome the capacity constraints imbedded in the present air traffic management (ATM) system. However, increased use of automation within any system is dependent on user acceptance. The present research sought to determine if the point at which an individual is no longer willing to accept or cooperate with automation can be manipulated. Forty participants underwent training on a computer-based air traffic control programme, followed by two ATM exercises (order counterbalanced), one with and one without the aid of automation. Results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation ('tipping point') decreased; suggesting it is indeed possible to alter automation acceptance. Practitioner Summary: This paper investigates whether the point at which a user of automation rejects automation (i.e. 'tipping point') is constant or can be manipulated. The results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation decreased; suggesting it is possible to alter automation acceptance.

Applied logistic regression

CERN Document Server

Hosmer, David W; Sturdivant, Rodney X

2013-01-01

 A new edition of the definitive guide to logistic regression modeling for health science and other applications This thoroughly expanded Third Edition provides an easily accessible introduction to the logistic regression (LR) model and highlights the power of this model by examining the relationship between a dichotomous outcome and a set of covariables. Applied Logistic Regression, Third Edition emphasizes applications in the health sciences and handpicks topics that best suit the use of modern statistical software. The book provides readers with state-of-

Logistics planning and logistics planning factors for humanitarian operations

OpenAIRE

Sullivan, Donna Marie.

1995-01-01

Due to the increasing demand on the military to conduct humanitarian operations, the need for logistics planning factors that are applicable to these operations has arisen. This thesis develops a model for humanitarian operations and employs the model to develop logistics planning factors for material consumption and a computer-assisted planning aid relating to the support of the victim population. U.S. Navy (U.S.N.) author.

In-plant logistics optimalization

OpenAIRE

Maroušek, Jan

2008-01-01

In a theoretical part of this work there is introduced a general view on logistics and its development, than a view on creating value for customer, basics of lean production, lean thinking and following methods as Six Sigma and Value Stream Mapping. At the end of the theoretical part there is mentioned outsourcing of logistics services and view on relationship between logistics provider and a client. In a practical part there is introduced a project of in-plant logistics optimalization in a f...

FEEDBACK AND LOGISTICS CONTROLLING

Directory of Open Access Journals (Sweden)

Mehesne Berek Szilvia

2015-07-01

Full Text Available The following things led to that the feedback, the supervision and improvement of the processes have become more pronounced: continuous rise in the importance of logistics; increase in complexity of its content; its activity becoming more complex. These activities are necessary for the optimum information supply. The intensification of market competition requires the corporations to possess exact and up-to-date information about their activities. Complexity of the logistics system presumes a parallel application of an effective feedback, supervision and management system simultaneously with the given logistics system. The indispensability of logistics is also proved by the fact that it can be found sporadically (in the form of logistics departments or in a complex way in case of each organization. The logistical approach means a huge support in the management since it contains the complexity, the handling as a unit in order to ensure a harmony of the different corporate departments and part activities. In addition to the professional application of a logistics system, there is an opportunity to coordinate the relations inside an organization as well as between the organizations and to handle them as a unit. The sine qua non of the success of logistical processes is a harmony of the devices applied. The controlling system is a device for feeding back the processes of a corporate system. By means of the checkpoints intercalated into the processes, the logistics controlling provides information for the leadership which contributes even more to the complex approach of logistics system. By dint of the logistics controlling, the monitoring and coordination of every logistical part activity become possible with the help of information supply ensured by the logistics controlling. The logistics controlling reviews, assesses and coordinates; these activities have an effect on the cost and income management. Its reason is to be searched in the built

Reverse logistics - a framework

NARCIS (Netherlands)

M.P. de Brito (Marisa); R. Dekker (Rommert)

2002-01-01

textabstractIn this paper we define and compare Reverse Logistics definitions. We start by giving an understanding framework of Reverse Logistics: the why-what-how. By this means, we put in context the driving forces for Reverse Logistics, a typology of return reasons, a classification of

Logistics centres development in Latvia

Directory of Open Access Journals (Sweden)

I. Kabashkin

2007-12-01

Full Text Available In the situation where a large increase in trade and freight transport volumes in the Baltic Sea region (BSR is expected and in which the BSR is facing a major economic restructuring, eff orts to achieve more integrated and sustainable transport and communication links within the BSR are needed. One of these eff orts is the development of logistics centres (LCs and their networking, which will continue to have an impact on improving communication links, spatial planning practices and approaches, logistics chain development and the promotion of sustainable transport modes. These factors will refl ect on logistics processes both in major gateway cities and in remote BSR areas. The importance of logistics systems as a whole is not seen clearly enough. Logistics actors see that logistics operations are not appreciated as much as other fi elds of activity. In addition, logistics centres and the importance of logistics activities to the business life of areas and the employment rate should be brought up better. In the paper main goal and tasks of national approach to LCs development are discussed. Strategic focus of new activities in this area is on the integration of various networks within and between logistics centres in order to improve and develop the quality of logistics networks as well as to spatially widen the networking activities. The key objectives are to integrate the links between logistics centres, ports and other logistics operators in a functional and sustainable way, to promote spatial integration by creating sustainable and integrated approaches to spatial planning of logistics centres and transport infrastructure, to improve ICT-based networking and communication practices of the fi elds of transport and logistics and to increase the competence of logistics centres and associated actors by organising educational and training events. The current activities include, for example, the creation of measures for transport networking and

Logistics engineering education from the point of view environment

Science.gov (United States)

Bányai, Ágota

2010-05-01

-of-the-art, reliable, automated mechatronics-material flow system with its single control engineering system provides the academic staff with up-to-date research facilities, and enables the students to study sophisticated equipment and systems that could also operate under industrial conditions, thus offering knowledge that can be efficiently utilised in the industry after graduation. The laboratory measurements of the programme in logistics engineering are performed in this laboratory, and they are supplemented by the theoretical and practical measurements in the ‘Robotic Technology Assembly Laboratory', the ‘Power Electronics Laboratory', the ‘Mechatronics Laboratory', the ‘CAD/CAM Laboratory' and the ‘Acoustics and Product Laboratory'. The bodies of knowledge connected with environment protection and sustainable development can be grouped around three large topic areas. In environmental economics the objective is to present the corporate-organisational aspects of environmental management. Putting environmental management in the focal point, the objective of the programme is to impart knowledge that can be utilised in practice which can be used to shift the relation between the organisation and its environment in the direction of sustainability. The tools include environmental controlling, environmental marketing and various solutions of environmental performance evaluation. The second large topic area is globalization and its logistic aspects. In the field of global logistics the following knowledge carries special weight: logistic challenges in a globalised world; the concept of global logistics, its conditions and effects; delayed manufacture, assembly, packaging; the economic investigation of delayed assembly; globalised purchase and distribution in logistics; the logistic features of the globalised production supply/distribution chain; meta-logistics systems; logistics-related EU harmonisation issues; the effect of e-commerce on the global logistic system; logistic

Method development for the analysis of nitrotoluenes, nitramines and other organic compounds in ammunition waste water

International Nuclear Information System (INIS)

Mussmann, P.; Preiss, A.; Levsen, K.; Wuensch, G.

1994-01-01

Gas chromatography and high performance liquid chromatography were used to determine explosives, their by- and degradation products near the former ammunition plant Elsnig in Saxony. Enrichment procedures using liquid/liquid-and solid-phase extraction, which have already been developed, were used to investigate ground and surface water samples. Mono-, di- and trinitrotoluenes as well as aminonitro- and chlorinated nitroaromatics were identified and quantified using GC/MS, the electron capture detector (ECD) and the nitrogen-phosphorus detector (NPD). Besides, some nitrophenols were identified in ground water. Additionally, RDX, which is hardly to be determined by GC, was quantified using high performance liquid chromatography. Identification was performed by the UV-spectra using a photodiode array detector. (orig.) [de

Influence Factors Regarding the Effectiveness of Automated Ballistic Comparison on 0.38 Special Caliber Bullets and Cartridge Cases.

Science.gov (United States)

Dos Santos, Lehi Sudy; Vieira Muterlle, Palloma

2018-03-01

Factors influencing effectiveness of automated comparisons, test-fired bullets, and cartridge cases from 0.38 Special revolvers were logged into the Evofinder ® Ballistic ID System. Tests were performed as follows: First test correlated test-fires of the same type, second test compared different types of ammunition components, third test replicated the second test in a larger database, and fourth test replicated the third test with students having no previous firearm identification experience. System effectiveness with projectiles in the first test was 0.89. With cartridge cases, effectiveness was 0.79 with combined results, but analysis of separate results by breech face and firing pin revealed low effectiveness by breech face (0.40). In the second, third, and fourth tests, effectiveness with projectiles were 0.61, 0.51, and 0.44. In addition, these tests had effectiveness with cartridge cases equivalent to 0.55, 0.43, and 0.44. Results are useful to establish routine protocols, system improvements, or comparative assessment of other electronic systems. © 2018 American Academy of Forensic Sciences.

SIMULATION OF LOGISTICS PROCESSES

Directory of Open Access Journals (Sweden)

Yu. Taranenko

2016-08-01

Full Text Available The article deals with the theoretical basis of the simulation. The study shows the simulation of logistic processes in industrial countries is an integral part of many economic projects aimed at the creation or improvement of logistics systems. The paper was used model Beer Game for management of logistics processes in the enterprise. The simulation model implements in AnyLogic package. AnyLogic product allows us to consider the logistics processes as an integrated system, which allows reaching better solutions. Logistics process management involves pooling the sales market, production and distribution to ensure the temporal level of customer service at the lowest cost overall. This made it possible to conduct experiments and to determine the optimal size of the warehouse at the lowest cost.

Complacency and Automation Bias in the Use of Imperfect Automation.

Science.gov (United States)

Wickens, Christopher D; Clegg, Benjamin A; Vieane, Alex Z; Sebok, Angelia L

2015-08-01

We examine the effects of two different kinds of decision-aiding automation errors on human-automation interaction (HAI), occurring at the first failure following repeated exposure to correctly functioning automation. The two errors are incorrect advice, triggering the automation bias, and missing advice, reflecting complacency. Contrasts between analogous automation errors in alerting systems, rather than decision aiding, have revealed that alerting false alarms are more problematic to HAI than alerting misses are. Prior research in decision aiding, although contrasting the two aiding errors (incorrect vs. missing), has confounded error expectancy. Participants performed an environmental process control simulation with and without decision aiding. For those with the aid, automation dependence was created through several trials of perfect aiding performance, and an unexpected automation error was then imposed in which automation was either gone (one group) or wrong (a second group). A control group received no automation support. The correct aid supported faster and more accurate diagnosis and lower workload. The aid failure degraded all three variables, but "automation wrong" had a much greater effect on accuracy, reflecting the automation bias, than did "automation gone," reflecting the impact of complacency. Some complacency was manifested for automation gone, by a longer latency and more modest reduction in accuracy. Automation wrong, creating the automation bias, appears to be a more problematic form of automation error than automation gone, reflecting complacency. Decision-aiding automation should indicate its lower degree of confidence in uncertain environments to avoid the automation bias. © 2015, Human Factors and Ergonomics Society.

Green Maritime Logistics

DEFF Research Database (Denmark)

Psaraftis, Harilaos N.

2016-01-01

By green maritime logistics we mean achieving an acceptable environmental performance of the maritime transport logistical supply chain while at the same time respecting traditional economic criteria. In this paper the environmental focus is on maritime emissions. Achieving such goal may involve ...

Natural Mallow Fiber-Reinforced Epoxy Composite for Ballistic Armor Against Class III-A Ammunition

Science.gov (United States)

Nascimento, Lucio Fabio Cassiano; Holanda, Luane Isquerdo Ferreira; Louro, Luis Henrique Leme; Monteiro, Sergio Neves; Gomes, Alaelson Vieira; Lima, Édio Pereira

2017-10-01

Epoxy matrix composites reinforced with up to 30 vol pct of continuous and aligned natural mallow fibers were for the first time ballistic tested as personal armor against class III-A 9 mm FMJ ammunition. The ballistic efficiency of these composites was assessed by measuring the dissipated energy and residual velocity after the bullet perforation. The results were compared to those in similar tests of aramid fabric (Kevlar™) commonly used in vests for personal protections. Visual inspection and scanning electron microscopy analysis of impact-fractured samples revealed failure mechanisms associated with fiber pullout and rupture as well as epoxy cracking. As compared to Kevlar™, the mallow fiber composite displayed practically the same ballistic efficiency. However, there is a reduction in both weight and cost, which makes the mallow fiber composites a promising material for personal ballistic protection.

Green Logistics Management

Science.gov (United States)

Chang, Yoon S.; Oh, Chang H.

Nowadays, environmental management becomes a critical business consideration for companies to survive from many regulations and tough business requirements. Most of world-leading companies are now aware that environment friendly technology and management are critical to the sustainable growth of the company. The environment market has seen continuous growth marking 532B in 2000, and 590B in 2004. This growth rate is expected to grow to 700B in 2010. It is not hard to see the environment-friendly efforts in almost all aspects of business operations. Such trends can be easily found in logistics area. Green logistics aims to make environmental friendly decisions throughout a product lifecycle. Therefore for the success of green logistics, it is critical to have real time tracking capability on the product throughout the product lifecycle and smart solution service architecture. In this chapter, we introduce an RFID based green logistics solution and service.

Economic Effectiveness Evaluation In Projects Consisting In Automating Settlement Systems. The Example Of A Financial Centre Of An Internationa l Automotive Company

OpenAIRE

Miroslaw Dyczkowski

2010-01-01

Economic effectiveness has become a decisive factor in feasibility studies for IT projects due to deteriorating economic situation. This paper characterises such an assessment on the example of an automated settlement system for a supply chain. The described project was carried out by a financial centre – located in Poland – of an in ternational company operating in the automotive industry. It aimed at applying EDI technologies to automate logistics. The project...

The logic of logistics: theory, algorithms and applications for logistics management

Directory of Open Access Journals (Sweden)

Claudio Barbieri da Cunha

2010-04-01

Full Text Available

Nesse texto o autor apresenta uma resenha acerca do livro "The logic of logistics: theory, algorithms and applications for logistics management", de autoria de Julien Bramel e David Simchi-Levi, publicado pela Springer-Verlag, em 1997.

Security in Logistics

Science.gov (United States)

Cempírek, Václav; Nachtigall, Petr; Široký, Jaromír

2016-12-01

This paper deals with security of logistic chains according to incorrect declaration of transported goods, fraudulent transport and forwarding companies and possible threats caused by political influences. The main goal of this paper is to highlight possible logistic costs increase due to these fraudulent threats. An analysis of technological processes will beis provided, and an increase of these transport times considering the possible threatswhich will beis evaluated economic costs-wise. In the conclusion, possible threat of companies'` efficiency in logistics due to the costs`, means of transport and increase in human resources` increase will beare pointed out.

High-throughput microfluidics automated cytogenetic processing for effectively lowering biological process time and aid triage during radiation accidents

International Nuclear Information System (INIS)

Ramakumar, Adarsh

2016-01-01

Nuclear or radiation mass casualties require individual, rapid, and accurate dose-based triage of exposed subjects for cytokine therapy and supportive care, to save life. Radiation mass casualties will demand high-throughput individual diagnostic dose assessment for medical management of exposed subjects. Cytogenetic techniques are widely used for triage and definitive radiation biodosimetry. Prototype platform to demonstrate high-throughput microfluidic micro incubation to support the logistics of sample in miniaturized incubators from the site of accident to analytical labs has been developed. Efforts have been made, both at the level of developing concepts and advanced system for higher throughput in processing the samples and also implementing better and efficient methods of logistics leading to performance of lab-on-chip analyses. Automated high-throughput platform with automated feature extraction, storage, cross platform data linkage, cross platform validation and inclusion of multi-parametric biomarker approaches will provide the first generation high-throughput platform systems for effective medical management, particularly during radiation mass casualty events

A robust optimization model for green regional logistics network design with uncertainty in future logistics demand

Directory of Open Access Journals (Sweden)

Dezhi Zhang

2015-12-01

Full Text Available This article proposes a new model to address the design problem of a sustainable regional logistics network with uncertainty in future logistics demand. In the proposed model, the future logistics demand is assumed to be a random variable with a given probability distribution. A set of chance constraints with regard to logistics service capacity and environmental impacts is incorporated to consider the sustainability of logistics network design. The proposed model is formulated as a two-stage robust optimization problem. The first-stage problem before the realization of future logistics demand aims to minimize a risk-averse objective by determining the optimal location and size of logistics parks with CO2 emission taxes consideration. The second stage after the uncertain logistics demand has been determined is a scenario-based stochastic logistics service route choices equilibrium problem. A heuristic solution algorithm, which is a combination of penalty function method, genetic algorithm, and Gauss–Seidel decomposition approach, is developed to solve the proposed model. An illustrative example is given to show the application of the proposed model and solution algorithm. The findings show that total social welfare of the logistics system depends very much on the level of uncertainty in future logistics demand, capital budget for logistics parks, and confidence levels of the chance constraints.

A New Advanced Logistics Supply Chain for Food Management Based on Green Logistics Theory

OpenAIRE

Lanqing Liu

2013-01-01

The study aims to investigate the advanced logistics supply chain for food management using green logistics. To protect the food logistics environment and prevent the environmental pollution, it is crucial to establish powerful modern supply chains to support the food management in transportation. The construction speed of the food companies is very fast; however, the food supply lags behind the food companies. As a result, the environmental pollution caused in the food logistics becomes seve...

International Logistics Science Conference

CERN Document Server

Hompel, Michael; Meier, J

2014-01-01

The importance of logistics in all its variations is still increasing. New technologies emerge, new planning methods and algorithms are developed, only to face a market with a growing complexity and the need of weighting monetary costs against ecological impact. Mastering these challenges requires a scientific viewpoint on logistics, but always with applications in mind. This volume presents up-to-date logistics research in all its diversity and interconnectedness. It grew out of the “International Logistics Science Conference” (ILSC) held in Dortmund in September 2013, bringing together leading scientists and young academics from nine different countries. The conference was jointly organized by the “Efficiency Cluster Logistics” and the “Fraunhofer Institute for Material Flow and Logistics”. The Program Committee used a double blind review process to choose the 12 strongest contributions, which were then grouped in four areas: - Sustainability logistics, including electric mobility, smart inform...

The logic of logistics theory, algorithms, and applications for logistics management

CERN Document Server

Simchi-Levi, David; Bramel, Julien

2014-01-01

Fierce competition in today's global market provides a powerful motivation for developing ever more sophisticated logistics systems. This book, written for the logistics manager and researcher, presents a survey of the modern theory and application of logistics. The goal of the book is to present the state of the art in the science of logistics management. This third edition includes new chapters on the subjects of game theory, the power of process flexibility, supply chain competition and collaboration. Among the other materials new to the edition are sections on discrete convex analysis and its applications to stochastic inventory models, as well as extended discussions of integrated inventory and pricing models. The material presents a timely and authoritative survey of the field that will make an invaluable companion to the work of many researchers and practitioners.   Review of earlier edition:   "The present book focuses on the application of operational research and mathematical modelling technique...

Improving the driver-automation interaction: an approach using automation uncertainty.

Science.gov (United States)

Beller, Johannes; Heesen, Matthias; Vollrath, Mark

2013-12-01

The aim of this study was to evaluate whether communicating automation uncertainty improves the driver-automation interaction. A false system understanding of infallibility may provoke automation misuse and can lead to severe consequences in case of automation failure. The presentation of automation uncertainty may prevent this false system understanding and, as was shown by previous studies, may have numerous benefits. Few studies, however, have clearly shown the potential of communicating uncertainty information in driving. The current study fills this gap. We conducted a driving simulator experiment, varying the presented uncertainty information between participants (no uncertainty information vs. uncertainty information) and the automation reliability (high vs.low) within participants. Participants interacted with a highly automated driving system while engaging in secondary tasks and were required to cooperate with the automation to drive safely. Quantile regressions and multilevel modeling showed that the presentation of uncertainty information increases the time to collision in the case of automation failure. Furthermore, the data indicated improved situation awareness and better knowledge of fallibility for the experimental group. Consequently, the automation with the uncertainty symbol received higher trust ratings and increased acceptance. The presentation of automation uncertaintythrough a symbol improves overall driver-automation cooperation. Most automated systems in driving could benefit from displaying reliability information. This display might improve the acceptance of fallible systems and further enhances driver-automation cooperation.

The Emergence of City Logistics

DEFF Research Database (Denmark)

Gammelgaard, Britta

2015-01-01

is therefore to increase understanding of how city logistics emerge, and secondarily, to investigate whether such processes can be managed at all. Design/methodology/approach: – A paradigm shift in urban planning creates new ways of involving stakeholders in new sustainability measures such as city logistics...... dialectic forces were at play. City logistics schemes are still in an innovation phase. The biggest challenge in managing a process toward city logistics is to convince the many public and private stakeholders of their mutual interest and goals. Research limitations/implications: – Urban goods transport...... city logistics projects may fail. Thereby, cities become more environmentally and socially sustainable. Originality/value: – Insights into a city logistics project from a change management perspective has not previously been reported in literature....

Recovery of radiation sources after the explosion of ammunition military facility of the city of Rio Tercero (Cordoba, Argentina); Recuperacion de fuentes radioactivas luego de la explosion de la fabrica militar de municiones de la Ciudad de Rio Tercero (Cordoba, Argentina)

Energy Technology Data Exchange (ETDEWEB)

Puntarulo, Luis J.; D' Apice, Americo A. [Superintendencia Federal de Bomberos, Ezeiza (Argentina). Policia Federal Argentina. Div. Cuartel Ezeiza; Superintendencia Federal de Bomberos, Buenos Aires (Argentina). Policia Federal Argentina. Seccion Seguridad Radiologica

2001-07-01

In this work it is reflected the operative task of the Team of Radiological Emergencies of the Federal Superintendence of Firemen, in the intervention that took place November 3 of 1995, in the Military Factory of Ammunition of the City of River Third, in the county of Cordoba (Argentina). After big explosions that caused the destruction of the building and surrounding areas, with dispersion of ammunition of canyons, we proceeded to locate and recover the industrial sources which were also at the scene. After their recovery, the sources were given to the Nuclear Regulatory Authority for its safe guard.(author)

The Logistics Knowledge Portal: Gateway to More Individualized Learning in Logistics.

Science.gov (United States)

Neumann, Gaby; Krzyzaniak, Stanislaw; Lassen, Carl Christian

This paper describes a research and development project initiated by a network of European logistics educators to promote all types, forms, and levels of logistics education by benefiting from the educational potential of multimedia/hypermedia as well as information technology and telecommunications. The main outcome of this project will be a…

Logistics Management: New trends in the Reverse Logistics

Science.gov (United States)

Antonyová, A.; Antony, P.; Soewito, B.

2016-04-01

Present level and quality of the environment are directly dependent on our access to natural resources, as well as their sustainability. In particular production activities and phenomena associated with it have a direct impact on the future of our planet. Recycling process, which in large enterprises often becomes an important and integral part of the production program, is usually in small and medium-sized enterprises problematic. We can specify a few factors, which have direct impact on the development and successful application of the effective reverse logistics system. Find the ways to economically acceptable model of reverse logistics, focusing on converting waste materials for renewable energy, is the task in progress.

REGIONAL LOGISTICS CENTER: FORMATION AND FUNCTIONING SPESIFIC

Directory of Open Access Journals (Sweden)

Oleg Tkach

2017-08-01

Full Text Available In this article the essence of the definition of logistics centers is defined, the main provisions concerning the formation of the logistics center are defined. The formation of a logistic hub is analyzed. The structure of the transport-logistic center is proposed. The basic requirements for the location of the regional logistics center and the principles of its operation are determined. The financial and financial mechanism of a typical logistics center and their effective functioning are presented. It is proved that the most important component of the logistics center is transport. Key words: logistics centers, logistics, hub, distribution centers, transport and logistics centers, regional logistic centers, logistics complex, transport, transport-logistic system.

Logistics innovation development

DEFF Research Database (Denmark)

Pedrosa, Alex; Blazevic, Vera; Jasmand, Claudia

2014-01-01

to investigate the role of boundary-spanning employees in deepening and broadening customer knowledge while developing logistics service innovations. Findings The results show that boundary-spanning employees’ engage sequentially in deepening and broadening customer knowledge throughout the logistics innovation...... development process. In particular it shows that deepening customer knowledge tends to occur in one-to-one interactions. When boundary-spanning employees engage in broadening customer knowledge, they develop a rich understanding of current customer. Research limitations/implications (if applicable) In general......Purpose This paper aims to investigate the microfoundations—boundary-spanning employees activities and behaviors—of deepening and broadening customer knowledge during logistics innovation development. Design/methodology/approach A multiple case study approach (six case studies) was adopted...

The logic of logistics theory, algorithms, and applications for logistics and supply chain management

CERN Document Server

Simchi-Levi, David; Bramel, Julien

2005-01-01

Fierce competition in today's global market provides a powerful motivation for developing ever more sophisticated logistics systems. This book, written for the logistics manager and researcher, presents a survey of the modern theory and application of logistics. The goal of the book is to present the state of the art in the science of logistics management. As a result, the authors have written a timely and authoritative survey of this field that many practitioners and researchers will find makes an invaluable companion to their work.

Measuring efficiency in logistics

Directory of Open Access Journals (Sweden)

Milan Milovan Andrejić

2013-06-01

Full Text Available Dynamic market and environmental changes greatly affect operating of logistics systems. Logistics systems have to realize their activities and processes in an efficient way. The main objective of this paper is to analyze different aspects of efficiency measurement in logistics and to propose appropriate models of measurement. Measuring efficiency in logistics is a complex process that requires consideration of all subsystems, processes and activities as well as the impact of various financial, operational, environmental, quality and other factors. The proposed models have a basis in the Data Envelopment Analysis method. They could help managers in decision making and corrective actions processes. The tests and results of the model show the importance of input and output variables selection.

International Production and Global Logistics Operations : Management Issues in Global Logistics with Offshored Production Systems

OpenAIRE

Korrmann, Franziska

2011-01-01

This paper is directed at discussing some of the management issues, problems and solutions of logistics in the context of offshored productive activities The introduction includes a discussion of the logistics topics and an introduction of the economic logic of offshoring. The main part analyses the logistics topics with regard to the internationally fragmented production. The topics of logistics include: Information flow and integration, transportation, inventory management, warehousing and ...

Logistic Fuel Processor Development

National Research Council Canada - National Science Library

Salavani, Reza

2004-01-01

The Air Base Technologies Division of the Air Force Research Laboratory has developed a logistic fuel processor that removes the sulfur content of the fuel and in the process converts logistic fuel...

Review on Doctoral Dissertation: Drago Pupavac: Logistics operator – the factor of dynamic optimization of global logistics chains

Directory of Open Access Journals (Sweden)

Ratko Zelenika

2007-05-01

Full Text Available The main objective of the scientific research of this doctoral thesis is the effect of the logistics operator in the function of cutting total costs of the global logistics chain. In order to achieve the objective of the research, a number of scientific methods have been applied such as survey methods, methods of dynamic programming and mixed convex programming. Owing to the applied scientific methodology,Drago Pupovac, M.Sc. has successfully interpreted the obtained results by proving that the selective model approach to active participants of the logistics chain gives the logistics operator the insight into potential logistics network, depicts skills of individual operators in the logistics network, specifies logistics activitiesof each logistics venture, provides information on costs of specific logistics activities and in that way proves that it enables logistics operator to optimize logistics chains by protecting them from the demand instability and changes.

The Emergence of City Logistics

DEFF Research Database (Denmark)

Gammelgaard, Britta; Aastrup, Jesper

2014-01-01

Purpose: Many city logistics projects in Europe have failed. The purpose of this article is to increase understanding of how city logistics emerge. A better understanding of the complex organizational processes with many actors and stakeholders in city logistics projects may prevent further failu...

Logistics, electronic commerce, and the environment

Science.gov (United States)

Sarkis, Joseph; Meade, Laura; Talluri, Srinivas

2002-02-01

Organizations realize that a strong supporting logistics or electronic logistics (e-logistics) function is important from both commercial and consumer perspectives. The implications of e-logistics models and practices cover the forward and reverse logistics functions of organizations. They also have direct and profound impact on the natural environment. This paper will focus on a discussion of forward and reverse e-logistics and their relationship to the natural environment. After discussion of the many pertinent issues in these areas, directions of practice and implications for study and research are then described.

A Study on Reverse Logistics

OpenAIRE

Reddy, Dhananjaya

2011-01-01

In the competitive world of manufacturing, companies are often searching for new ways to improve their process, customer satisfaction and stay ahead in the game with their competitors. Reverse logistics has been considered a strategy to bring these things to life for the past decade or so. This thesis work tries to shed some light on the basics of reverse logistics and how reverse logistics can be used as a management strategy. This paper points out the fundamentals of reverse logistics and l...

Logistics-production, logistics-marketing and external integration: Their impact on performance

OpenAIRE

Giménez, Cristina; Ventura, Eva

2003-01-01

Highly competitive environments are leading companies to implement Supply Chain Management (SCM) to improve performance and gain a competitive advantage. SCM involves integration, co-ordination and collaboration across organisations and throughout the supply chain. It means that SCM requires internal (intraorganisational) and external (interorganisational) integration. This paper examines the Logistics-Production and Logistics- Marketing interfaces and their relation with the external integra...

The Challenge of Moving from Performance Based Logistics to an Operational Logistics Framework

National Research Council Canada - National Science Library

Bryant, Russell E

2005-01-01

... and qualified forces for the combatant commanders of the 21st century. One focal area is within the logistics area of overall warfighter support, commonly referred to as performance based logistics (PBL...

Low cost automation

International Nuclear Information System (INIS)

1987-03-01

This book indicates method of building of automation plan, design of automation facilities, automation and CHIP process like basics of cutting, NC processing machine and CHIP handling, automation unit, such as drilling unit, tapping unit, boring unit, milling unit and slide unit, application of oil pressure on characteristics and basic oil pressure circuit, application of pneumatic, automation kinds and application of process, assembly, transportation, automatic machine and factory automation.

Green Maritime Logistics

DEFF Research Database (Denmark)

Psaraftis, Harilaos N.

2014-01-01

Typical problems in maritime logistics include, among others, optimal ship speed, ship routing and scheduling, fleet deployment, fleet size and mix, weather routing, intermodal network design, modal split, transshipment, queuing at ports, terminal management, berth allocation, and total supply...... chain management. The traditional analysis of these problems has been in terms of cost- benefit and other optimization criteria from the point of view of the logistics provider, carrier, shipper, or other end-user. Such traditional analysis by and large either ignores environmental issues, or considers...... them of secondary importance. Green maritime logistics tries to bring the environmental dimension into the problem, and specifically the dimension of emissions reduction, by analyzing various trade-offs and exploring ‘win-win’ solutions. This talk takes a look at the trade-offs that are at stake...

Subset selection from generalized logistic populations

NARCIS (Netherlands)

Laan, van der M.J.; Laan, van der P.

1997-01-01

We give an introduction to the logistic and generalized logistic distributions. These generalized logistic distributions Type-I, Type-II and Type-III are indexed by a real valued parameter. They have been derived as mixtures with the standard logistic distribution and for discrete values of the

Challenges of Green Logistics in Southeast Europe

OpenAIRE

Beškovnik, Bojan; Jakomin, Livio

2010-01-01

This paper describes the trends towards green logistics in global aspect and challenges of adopting green logistics in the region of Southeast Europe. Modern logistics with supply chain management is experiencing a period of important evolution. From reversible logistics, we came to green logistics, which is a wider concept of environmentally friendly thinking. Reverse logistics includes processes of movements and transportation of waste from users to recycling plants; meanwhile, green logist...

Logistics service management; differentiating the logistics service

NARCIS (Netherlands)

Veeken, van der D.J.M.; Rutten, W.G.M.M.

1998-01-01

In this article a model is described, which enables differentiation of the logistics service that a company offers to its customers. Differentiating this service is essential for businesses with a large variation within their customer and/or products portfolio. The model consists of four phases:

Autonomy and Automation

Science.gov (United States)

Shively, Jay

2017-01-01

A significant level of debate and confusion has surrounded the meaning of the terms autonomy and automation. Automation is a multi-dimensional concept, and we propose that Remotely Piloted Aircraft Systems (RPAS) automation should be described with reference to the specific system and task that has been automated, the context in which the automation functions, and other relevant dimensions. In this paper, we present definitions of automation, pilot in the loop, pilot on the loop and pilot out of the loop. We further propose that in future, the International Civil Aviation Organization (ICAO) RPAS Panel avoids the use of the terms autonomy and autonomous when referring to automated systems on board RPA. Work Group 7 proposes to develop, in consultation with other workgroups, a taxonomy of Levels of Automation for RPAS.

3PL Services in City Logistics

DEFF Research Database (Denmark)

Aastrup, Jesper; Gammelgaard, Britta; Prockl, Günter

2012-01-01

The purpose of this paper is 1) to develop an overview of activities and services that can add value for users and consignees in city logistics schemes based on Urban Consolidation Centre, and 2) to understand and analyze the perceived value for users and consignees from using such services....... The paper will be based on studies of the city logistics literature and existing city logistics schemes, as well as survey and interview findings from studies of potential users (retailers) in Copenhagen inner city and interviews with existing users (retailers) of existing city logistics services...... in the cities of Maastricht, Netherlands, and Hasselt, Belgium. The paper provides an overview and classification of possible third party logistics services in city logistics schemes. Also, findings about value perceived by current users as well as potential users are presented. Literature on city logistics has...

Analyzing the Dependency Between National Logistics Performance and Competitiveness: Which Logistics Competence is Core for National Strategy?

Directory of Open Access Journals (Sweden)

Burmaoglu Serhat

2011-12-01

Full Text Available With the advancements in the strategic management field, logistics management has changed considerably and logistics competency has emerged as a new and important area of research. In this regard, the purpose of this study is to find the core logistics abilities, which enable nations to achieve a competitive advantage in the logistics market. Two different data sets, one from World Economic Forum and the other from the World Bank were used. Cluster and discriminant analysis were used to answer the research questions. The results indicated that while the logistics infrastructure and the customs were absolute in determining a high-competitive country, the logistics competence and the tracking & tracing were the core logistics abilities needed to sustain the competitive advantage in long term. The implications of these results are also discussed.

dLOGIS: Disaster Logistics Information System

Science.gov (United States)

Koesuma, Sorja; Riantana, Rio; Siswanto, Budi; Aji Purnomo, Fendi; Lelono, Sarjoko

2017-11-01

There are three timing of disaster mitigation which is pre-disaster, emergency response and post-disaster. All of those is important in disaster mitigation, but emergency response is important when we are talking about time. Emergency response has limited time when we should give help. Rapid assessment of kind of logistic, the number of survivors, number children and old people, their gender and also for difable person. It should be done in emergency response time. Therefore we make a mobile application for logistics management system. The name of application is dLOGIS, i.e. Disaster Logistics Information System. The application is based on Android system for mobile phone. Otherwise there is also website version. The website version is for maintenance, data input and registration. So the people or government can use it directly when there is a disaster. After login in dLOGIS, there is five main menus. The first main menu shows disaster information, refugees conditions, logistics needed, available logistics stock and already accepted logistics. In the second menu is used for entering survivors data. The field coordinator can enter survivors data based on the rapid assessment in disaster location. The third menu is used for entering kind of logistic. Number and kind of logistics are based on the BNPB needed standard for the survivor. The fourth menu displays the logistics stock available in field coordinator. And the last menu displays the logistics help that already accepted and sent by donation. By using this application when a disaster happened, field coordinator or local government can use maintenance distribution of logistics base on their needs. Also for donor people who will give help to survivor, they can give logistics with the corresponding of survivor needs.

3PL, 4PL and insourcing logistics

Directory of Open Access Journals (Sweden)

Mauro Vivaldini

2015-12-01

Full Text Available Logistics services have evolved and changed over time, especially in the hiring of them according to the concepts of 3PL (third party logistics, 4PL (fourth party logistics or insourcing logistics. 3PL service is a consolidated business, 4PL is an option for outsourcing logistics and has already been adopted by some organizations, and insourcing logistics suggests the return of these activities being internalized by companies, which is still a relatively unexplored subject in logistics literature. Analyzing these themes in the literature, this study updates the view on them and proposes a conceptual framework that classifies the different models of logistics services, showing the different options that can be adopted to help the company decide how to run their logistics services.

Country logistics performance and disaster impact.

Science.gov (United States)

Vaillancourt, Alain; Haavisto, Ira

2016-04-01

The aim of this paper is to deepen the understanding of the relationship between country logistics performance and disaster impact. The relationship is analysed through correlation analysis and regression models for 117 countries for the years 2007 to 2012 with disaster impact variables from the International Disaster Database (EM-DAT) and logistics performance indicators from the World Bank. The results show a significant relationship between country logistics performance and disaster impact overall and for five out of six specific logistic performance indicators. These specific indicators were further used to explore the relationship between country logistic performance and disaster impact for three specific disaster types (epidemic, flood and storm). The findings enhance the understanding of the role of logistics in a humanitarian context with empirical evidence of the importance of country logistics performance in disaster response operations. © 2016 The Author(s). Disasters © Overseas Development Institute, 2016.

Logistics Collaboration between Shippers and Logistics Service Providers. Observations in the chemical industry

NARCIS (Netherlands)

Drs. Lenny Visser

2007-01-01

Summary Project objectives This study fits into a larger research project on logistics collaboration and outsourcing decisions. The final objective of this larger project is to analyze the logistics collaboration decision in more detail to identify thresholds in these decisions. To reach the

Efficiency and Logistics

CERN Document Server

Hompel, Michael; Klumpp, Matthias

2013-01-01

The „EffizienzCluster LogistikRuhr“ was a winner in the Leading Edge Science Cluster competition run by the German federal Ministry of Education and Research. The mission and aim of the „EffizienzCluster LogistikRuhr“ is to facilitate tomorrow’s individuality – in the sense of individual goods supply, mobility, and production – using 75 percent of today’s resources. Efficiency – both in economical and ecological terms – is enabled by state-of-the-art and innovative logistical solutions including transportation, production and intralogistics. These proceedings “Efficiency and Logistics” give first answers from 27 research projects as an insight into the current state of research of Europe’s leading research and development cluster in logistics and as a contribution to the discussion on how logistics as a science can help to cope with foreseeable resource shortage and sustainability as global challenges.

Logistic management materials-technical support railway enterprises

OpenAIRE

Dykan, V.; Borozenetc, T.

2014-01-01

The essence of logistics management. Determine the feasibility of applying the principles of logistics management in organizing the logistics of railway transport. Discussed measures to develop suppliers in the implementation of logistics management logistics. Identified the need to develop and implement regulatory and methodical system to improve materials-technical support through the introduction of modern logistics principles. Applied systemic campaign to organize the materials-technical ...

Reverse logistics policy – differences between conservative and innovative reverse logistics management

Directory of Open Access Journals (Sweden)

Alena Klapalová

2013-01-01

Full Text Available One of the of the key barriers that hampers effective and efficient management of reverse flows detected within a number of empirical surveys and case studies focused on reverse logistics and/or return management is business (organisational policy, specifically lack of policy, deficiency in existing policy or inferior policy. Despite this fact, there is a gap in literature which would show some evidence from practice that innovative reverse logistics policy both can pay off and is associated with certain aspects of reverse logistics management. Such proof can have several implications. It can support the call for better understanding and more research of the linkages of reverse logistics with other corporate functions, promote the acceptation of strategic character of reverse logistics and stress the role of RL policy within the rest of overall corporate management.The aim of this paper is to contribute and to enrich the existing body of knowledge concerning the above-mentioned gap through presentation of survey results that was realized in 2012 among managers of 244 Czech firms. The results demonstrate the statistically significant association between the innovativeness of RL policy and profitability of firms, quality of RL planning, perception of RL importance, level of RL knowledge and perception of product innovation importance for firms’ competitiveness and frequency of product innovation. They also reveal statistically significant differences between firms with conservative and innovative RL policy and the perceived existence of some barriers to manage RL.

Quality of investments in logistics

Directory of Open Access Journals (Sweden)

Borut Jereb

2014-06-01

Full Text Available The issue problem of paper is that base on researches connected with analysis of investments in logistics based on the review of 100 pooled manuscripts from different sources (scientific journals and online magazines from 1996 to 2012 it was showed that there don't exist quality as well as leadership has no a good overview of the investment in logistics. It was claimed that the quality point of view should be demanding part of investments in logistics. Val Log was proposed as an answer to the issues of managing quality of investments in logistics at the tactical level in organizations. By Val Log it is possible to overcome the myth that logistics projects cost money while business projects bring money. Val Log also provides detailed instructions for goals and metrics for each process. By doing changes the quality should be the obvious pillar of our affords doing it.

The Logistics Performance Effect in International Trade

Directory of Open Access Journals (Sweden)

Azmat Gani

2017-12-01

Full Text Available The continuous growth in world trade depends on the efficiency of trade support structures such as the logistics services. Despite logistics integral role in supporting commercial activities, there has generally been a low level of analysis and trade policy research focus from trade practitioners. This paper explores the effect of logistics performance in international trade. The analysis draws on overall logistics performance as well as disaggregated measures of logistics specificities data for a large sample of countries. The empirical analysis involved the estimation of standard export and import equations incorporating measures of logistics performance. The findings show that the overall logistics performance is positively and statistically significantly correlated with exports and imports. The analysis is also extended by investigating if logistics specificities mattered for international trade. The findings reveal that several dimensions capturing logistics performance have statistically significant and positive effect, mostly on exports. The main policy implication is that continuous investment in logistics infrastructure and services can positively impact international trade.

Determination of 236U and transuranium elements in depleted uranium ammunition by α-spectrometry and ICP-MS

International Nuclear Information System (INIS)

Desideri, D.; Meli, M.A.; Roselli, C.; Testa, C.; Boulyga, S.F.; Becker, J.S.

2002-01-01

It is well known that ammunition containing depleted uranium (DU) was used by NATO during the Balkan conflict. To evaluate the origin of DU (the enrichment of natural uranium or the reprocessing of spent nuclear fuel) it is necessary to directly detect the presence of activation products ( 236 U, 239 Pu, 240 Pu, 241 Am, and 237 Np) in the ammunition. In this work the analysis of actinides by α-spectrometry was compared with that by inductively coupled plasma mass spectrometry (ICP-MS) after selective separation of ultratraces of transuranium elements from the uranium matrix. 242 Pu and 243 Am were added to calculate the chemical yield. Plutonium was separated from uranium by extraction chromatography, using tri-n-octylamine (TNOA), with a decontamination factor higher than 10 6 ; after elution plutonium was determined by ICP-MS ( 239 Pu and 240 Pu) and α-spectrometry ( 239+240 Pu) after electroplating. The concentration of Pu in two DU penetrator samples was 7 x 10 -12 g g -1 and 2 x 10 -11 g g -1 . The 240 Pu/ 239 Pu isotope ratio in one penetrator sample (0.12±0.04) was significantly lower than the 240 Pu/ 239 Pu ratios found in two soil samples from Kosovo (0.35±0.10 and 0.27±0.07). 241 Am was separated by extraction chromatography, using di(2-ethylhexyl)phosphoric acid (HDEHP), with a decontamination factor as high as 10 7 . The concentration of 241 Am in the penetrator samples was 2.7 x 10 -14 g g -1 and -15 g g -1 . In addition 237 Np was detected at ultratrace levels. In general, ICP-MS and α-spectrometry results were in good agreement.The presence of anthropogenic radionuclides ( 236 U, 239 Pu, 240 Pu, 241 Am, and 237 Np) in the penetrators indicates that at least part of the uranium originated from the reprocessing of nuclear fuel. Because the concentrations of radionuclides are very low, their radiotoxicological effect is negligible. (orig.)

Determination of (236)U and transuranium elements in depleted uranium ammunition by alpha-spectrometry and ICP-MS.

Science.gov (United States)

Desideri, D; Meli, M A; Roselli, C; Testa, C; Boulyga, S F; Becker, J S

2002-11-01

It is well known that ammunition containing depleted uranium (DU) was used by NATO during the Balkan conflict. To evaluate the origin of DU (the enrichment of natural uranium or the reprocessing of spent nuclear fuel) it is necessary to directly detect the presence of activation products ((236)U, (239)Pu, (240)Pu, (241)Am, and (237)Np) in the ammunition. In this work the analysis of actinides by alpha-spectrometry was compared with that by inductively coupled plasma mass spectrometry (ICP-MS) after selective separation of ultratraces of transuranium elements from the uranium matrix. (242)Pu and (243)Am were added to calculate the chemical yield. Plutonium was separated from uranium by extraction chromatography, using tri- n-octylamine (TNOA), with a decontamination factor higher than 10(6); after elution plutonium was determined by ICP-MS ((239)Pu and (240)Pu) and alpha-spectrometry ((239+240)Pu) after electroplating. The concentration of Pu in two DU penetrator samples was 7 x 10(-12) g g(-1) and 2 x 10(-11) g g(-1). The (240)Pu/(239)Pu isotope ratio in one penetrator sample (0.12+/-0.04) was significantly lower than the (240)Pu/(239)Pu ratios found in two soil samples from Kosovo (0.35+/-0.10 and 0.27+/-0.07). (241)Am was separated by extraction chromatography, using di(2-ethylhexyl)phosphoric acid (HDEHP), with a decontamination factor as high as 10(7). The concentration of (241)Am in the penetrator samples was 2.7 x 10(-14) g g(-1) and <9.4 x 10(-15) g g(-1). In addition (237)Np was detected at ultratrace levels. In general, ICP-MS and alpha-spectrometry results were in good agreement. The presence of anthropogenic radionuclides ((236)U, (239)Pu,(240)Pu, (241)Am, and (237)Np) in the penetrators indicates that at least part of the uranium originated from the reprocessing of nuclear fuel. Because the concentrations of radionuclides are very low, their radiotoxicological effect is negligible.

LOGISTICS MANAGEMENT IN THE CONTEMPORARY ECONOMY

Directory of Open Access Journals (Sweden)

Ion SARBU

2014-03-01

Full Text Available The evolution of logistics management as a system in the recent decades can be characterized by the influence of the globalization processes and the economic integration in the European Union. Systemic logistic approach ensured revolutionizing the optimization of the logistics chain. Logistics management must be given to permanent forms of the new legal and organizational structure appropriate to the contemporary economy.

LOGISTICS MANAGEMENT IN THE CONTEMPORARY ECONOMY

Directory of Open Access Journals (Sweden)

Ion SARBU

2014-01-01

Full Text Available The evolution of logistics management as a system in the recent decades can be characterized by the influence of the globalization processes and the economic integration in the European Union. Systemic logistic approach ensured revolutionizing the optimization of the logistics chain. Logistics management must be given to permanent forms of the new legal and organizational structure appropriate to the contemporary economy.

Logistic regression applied to natural hazards: rare event logistic regression with replications

Science.gov (United States)

Guns, M.; Vanacker, V.

2012-06-01

Statistical analysis of natural hazards needs particular attention, as most of these phenomena are rare events. This study shows that the ordinary rare event logistic regression, as it is now commonly used in geomorphologic studies, does not always lead to a robust detection of controlling factors, as the results can be strongly sample-dependent. In this paper, we introduce some concepts of Monte Carlo simulations in rare event logistic regression. This technique, so-called rare event logistic regression with replications, combines the strength of probabilistic and statistical methods, and allows overcoming some of the limitations of previous developments through robust variable selection. This technique was here developed for the analyses of landslide controlling factors, but the concept is widely applicable for statistical analyses of natural hazards.

Home Automation

OpenAIRE

Ahmed, Zeeshan

2010-01-01

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Logistic regression models

CERN Document Server

Hilbe, Joseph M

2009-01-01

This book really does cover everything you ever wanted to know about logistic regression … with updates available on the author's website. Hilbe, a former national athletics champion, philosopher, and expert in astronomy, is a master at explaining statistical concepts and methods. Readers familiar with his other expository work will know what to expect-great clarity.The book provides considerable detail about all facets of logistic regression. No step of an argument is omitted so that the book will meet the needs of the reader who likes to see everything spelt out, while a person familiar with some of the topics has the option to skip "obvious" sections. The material has been thoroughly road-tested through classroom and web-based teaching. … The focus is on helping the reader to learn and understand logistic regression. The audience is not just students meeting the topic for the first time, but also experienced users. I believe the book really does meet the author's goal … .-Annette J. Dobson, Biometric...

Macro-institutional Complexity in Logistics

DEFF Research Database (Denmark)

Wessel, Frederic; Kinra, Aseem; Kotzab, Herbert

2016-01-01

structure and transactional costs, the concept of environmental complexity is applied to the logistics management perspective. Thereby, the impacts which a given framework on a macro-institutional level might have on the situation and leeway in decision-making at the firm (micro) or the supply chain (meso......In this paper, the interlink between the concept of macro-institutional complexity in logistics and the dynamics in the logistics practice of Eastern Europe will be examined. Referring to the importance of different authors having ascribed to the external environmental uncertainty on organizational......) levels will be analysed. Furthermore, a quantitative modelling approach will be presented and exemplified by using the case of logistics infrastructure in Eastern Europe....

Optimization of automation: I. Estimation method of cognitive automation rates reflecting the effects of automation on human operators in nuclear power plants

International Nuclear Information System (INIS)

Lee, Seung Min; Kim, Jong Hyun; Seong, Poong Hyun

2014-01-01

Highlights: • We propose an estimation method of the automation rate by taking the advantages of automation as the estimation measures. • We conduct the experiments to examine the validity of the suggested method. • The higher the cognitive automation rate is, the greater the decreased rate of the working time will be. • The usefulness of the suggested estimation method is proved by statistical analyses. - Abstract: Since automation was introduced in various industrial fields, the concept of the automation rate has been used to indicate the inclusion proportion of automation among all work processes or facilities. Expressions of the inclusion proportion of automation are predictable, as is the ability to express the degree of the enhancement of human performance. However, many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, this paper proposes a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs). Automation in NPPs can be divided into two types: system automation and cognitive automation. Some general descriptions and characteristics of each type of automation are provided, and the advantages of automation are investigated. The advantages of each type of automation are used as measures of the estimation method of the automation rate. One advantage was found to be a reduction in the number of tasks, and another was a reduction in human cognitive task loads. The system and the cognitive automation rate were proposed as quantitative measures by taking advantage of the aforementioned benefits. To quantify the required human cognitive task loads and thus suggest the cognitive automation rate, Conant’s information-theory-based model was applied. The validity of the suggested method, especially as regards the cognitive automation rate, was proven by conducting

Outsourcing Operational Logistics: Buyer Beware

Science.gov (United States)

2003-05-16

This logistics system takes far too many people to conduct support missions and does not provide the desired customer performance in terms of...FINAL 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE (U) 5b. GRANT NUMBER 5c...Form 298 (Rev. 8-98) 1 (Unclassified Paper) NAVAL WAR COLLEGE Newport, R.I. OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE By LAMONT WOODY Lieutenant

Logistic regression applied to natural hazards: rare event logistic regression with replications

Directory of Open Access Journals (Sweden)

M. Guns

2012-06-01

Full Text Available Statistical analysis of natural hazards needs particular attention, as most of these phenomena are rare events. This study shows that the ordinary rare event logistic regression, as it is now commonly used in geomorphologic studies, does not always lead to a robust detection of controlling factors, as the results can be strongly sample-dependent. In this paper, we introduce some concepts of Monte Carlo simulations in rare event logistic regression. This technique, so-called rare event logistic regression with replications, combines the strength of probabilistic and statistical methods, and allows overcoming some of the limitations of previous developments through robust variable selection. This technique was here developed for the analyses of landslide controlling factors, but the concept is widely applicable for statistical analyses of natural hazards.

A Theoretic Model of Transport Logistics Demand

OpenAIRE

Natalija Jolić; Nikolina Brnjac; Ivica Oreb

2006-01-01

Concerning transport logistics as relation between transportand integrated approaches to logistics, some transport and logisticsspecialists consider the tenn tautological. However,transport is one of the components of logistics, along with inventories,resources, warehousing, infonnation and goods handling.Transport logistics considers wider commercial and operationalframeworks within which the flow of goods is plannedand managed. The demand for transport logistics services canbe valorised as ...

Improvement of logistics education from the point of view environmental management

Science.gov (United States)

Bányai, Á.

2009-04-01

The paper briefly presents the influence of environmental management on the improvement of the logistics education and research structure of the Department of Materials Handling and Logistics at the University of Miskolc, Hungary. The logistics, as an integrated science offers a very good possibility to demonstrate the effect of new innovative knowledge on the migration of the priorities of education and research of sciences. The importance of logistics in the field of recycling (or in wider sense in the field of environmental management) can be justified by the high proportion of logistic costs (as investment and operation costs) and these costs show that optimum logistic solutions are able to decrease the financial outcomes and lead to the establishment of a profitable system. Technological change constantly creates new demands on both education and research. The most important objective of the department is to create a unique logistics education in the country. For this reason the department offered up-to-date integrated knowledge at all level: undergraduate, master degree and PhD education. The integration of logistics means traditionally the joint use of technology of material handling, method of material flow, technology method of traffic, information technology, management sciences, production technology, marketing, market research, technology of services, mathematics and optimization, communication technology, system engineering, electronics and automation, mechatronics [1, 3]. The education and research portfolio of the department followed this tradition till 1993. The new lectures in the field of sustainability (logistics of recycling, logistics of quality management and recycling, closed loop economy, EU logistics or global logistics) became more and more important in the logistics education. The results of fast developments in closed loop economy, recycling, waste management, environmental protection are more and more used in the industry and this

Logistics potentials in business competitive advantage creation

Directory of Open Access Journals (Sweden)

Rafał Matwiejczuk

2013-12-01

Full Text Available Background: Companies constantly search for ways to achieve and sustain long-term competitive advantage. Among the factors influencing the competitive advantage creation there are so called logistics potentials, which constitute a component part of a business strategic potentials. Logistics resources, logistics capabilities and logistics competences are the main components of the logistics potentials structure and hierarchy. Methods: In order to recognize the logistics potentials which determine the competitive advantage creation one may use the assumptions and elements of contemporary management concepts, including strategic management. In particular the article deals with Resource-Based View (RBV, Dynamic Capabilities Concept (DCC and - first of all - Competence-Based Management (CBM. Results and conclusions: Several significant research projects have presented a wide scope and a large number of possibilities of logistics potentials (and logistics competences in particular influence on business competitive advantage creation. The article briefly presents the research results conducted by: (1 Michigan State University (USA, (2 European Logistics Association (ELA in cooperation with A.T. Kearney, (3 Computer Sciences Corporation and (4 Capgemini. The research results have pointed out to differentiated but at the same distinctive symptoms of logistics competences influence on competitive advantage creation. The article also refers to the results of the research carried out by the Chair of Logistics & Marketing at Opole University (Poland in companies operating in Poland. The research has been mainly dealing with the significance of logistics competences in competitive advantage creation.

Combining or Separating Forward and Reverse Logistics

DEFF Research Database (Denmark)

Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel; Nielsen, Anders

2018-01-01

Purpose – While forward logistics handles and manages the flow of goods downstream in the supply chain from suppliers to customers, reverse logistics (RL) manages the flow of returned goods upstream. A firm can combine reverse logistics with forward logistics, keep the flows separated, or choose......-research addresses intra-RL issues while the relationship between forward and reverse logistics is under-researched. This paper contributes to RL-theory by identifying the contextual factors that determine the most advantageous relationship between forward and reverse logistics, and proposes a novel decision making...

Outsourcing of Logistics Activities in Manufacturing Industry

Directory of Open Access Journals (Sweden)

Anton Ogorelc

2012-10-01

Full Text Available The external supply of logistics se1vices is part of a trend towardoutsourcing non-core logistics activities. The scope ofthird-party logistics may range from a relatively limited combinationof activities (e.g. transportation and warehousing to acomprehensive set of logistics se1vices.The authors first discuss the characteristics of business logisticsin manufacturing indusfly, to be taken into account inlogistics outsourcing. They particularly point out the motimtionsfor logistics outsourcing, the possibilities of outsourcing,as well as supplier selection. Finally they analyze the outsourcingin the reverse logistics.

Fungible weights in logistic regression.

Science.gov (United States)

Jones, Jeff A; Waller, Niels G

2016-06-01

In this article we develop methods for assessing parameter sensitivity in logistic regression models. To set the stage for this work, we first review Waller's (2008) equations for computing fungible weights in linear regression. Next, we describe 2 methods for computing fungible weights in logistic regression. To demonstrate the utility of these methods, we compute fungible logistic regression weights using data from the Centers for Disease Control and Prevention's (2010) Youth Risk Behavior Surveillance Survey, and we illustrate how these alternate weights can be used to evaluate parameter sensitivity. To make our work accessible to the research community, we provide R code (R Core Team, 2015) that will generate both kinds of fungible logistic regression weights. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Outsourcing Logistics Activities: Evidence from Slovenia

Directory of Open Access Journals (Sweden)

Klemen Kavčič

2016-12-01

Full Text Available The purpose of this research is to investigate how logistics outsourcing performs activities that have been traditionally carried out within the outsourcer’s company. The study examines the characteristics of logistics and transport services, which are important in cooperation with service providers. Two groups were formed according to the average values of the characteristics of logistics activities. ‘Cost, quality and response’ are important for the first group, while ‘logistics, environment and the ability to adapt to client processes’ are important for the second group. The results of the survey carried out in Slovenian enterprises show that both groups are primarily interested in express freight and shipment services, the difference lying in the understanding of logistics, mutual trust and brand recognition. The findings will be useful both in business practice and for managers, providing them with a better understanding of the performance of logistics outsourcing.

Content Marketing Plan for Logistics Company : Case: NetLogistic JVM Oy

OpenAIRE

Riabochkina, Elizaveta

2017-01-01

This project aim is to create a Content Marketing Strategy for a Finnish logistics company. The aim of the thesis is to develop an action plan that will help the commissioning company increase sales and gain new customers. The commissioner for the study is NetLogistic JVM Oy. The Company specializes in handling trade of transit and export shipments to Russia and CIS-countries via Finland. The company does not have huge resources to run large campaign, but is looking for ways to reach new...

The Art and Science of Defense Logistics

Science.gov (United States)

1995-04-01

The Art And Science Of Defense Logistics CSC 1995 SUBJECT AREA - Logistics THE ART AND SCIENCE OF DEFENSE LOGISTICS...Government EXECUTIVE SUMMARY Title: The Art and Science of Defense Logistics Author: Major S. I. Schuler, USMC Research Questions: 1...00-1995 4. TITLE AND SUBTITLE The Art And Science Of Defense Logistics 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Logistics Reduction Technologies for Exploration Missions

Science.gov (United States)

Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

2014-01-01

Human exploration missions under study are limited by the launch mass capacity of existing and planned launch vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Although mass is typically the focus of exploration missions, due to its strong impact on launch vehicle and habitable volume for the crew, logistics volume also needs to be considered. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing six logistics technologies guided by a systems engineering cradle-to-grave approach to enable after-use crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. Reduction of mass has a corresponding and significant impact to logistical volume. The reduction of logistical volume can reduce the overall pressurized vehicle mass directly, or indirectly benefit the mission by allowing for an increase in habitable volume during the mission. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as mission durations increase. Early studies have shown that the use of advanced logistics technologies can save approximately 20 m(sup 3) of volume during transit alone for a six-person Mars conjunction class mission.

The spatial dimension of cycle logistics

Directory of Open Access Journals (Sweden)

Luca Staricco

2016-08-01

Full Text Available Cycle logistics is emerging as a promising alternative in urban freight transport. Compared to fossil fuelled vans, the use of cycles for delivering goods within urban areas offers advantages in terms of environmental friendliness, economic efficiency, flexibility, and liveability of urban neighbourhood. At the same time, cycle logistics has to face limits in terms of weight and volume of goods that can be delivered, distances that can be covered, and spatial urban structures that can be served. This latter issue has till now received less attention in the scientific literature: it is generally recognized that cycle logistics performs at its best in inner urban areas, but no systematic study has been realized to identify specific spatial requisites for the effectiveness of cycle logistics. This paper provides a brief review of the main issues that emerge from the literature over cycle logistics, and contributes to stimulate the debate over the spatial dimension of cycle logistics: it presents a classification of cycle logistics schemes, on the basis of their integration with other urban logistic facilities and of the spatial structure of delivery operations. A three-level classification is proposed, depending on the type of goods consolidation: only distribution without consolidation, consolidation in a fixed urban consolidation centre, or consolidation in a mobile depot; for each level, operational examples and case studies are provided. This systematizing typology could support both public and private operators in decisions about the organization of cycle logistics facilities, such as the location of urban consolidation centres or the composition of cycle fleets.

Process automation

International Nuclear Information System (INIS)

Moser, D.R.

1986-01-01

Process automation technology has been pursued in the chemical processing industries and to a very limited extent in nuclear fuel reprocessing. Its effective use has been restricted in the past by the lack of diverse and reliable process instrumentation and the unavailability of sophisticated software designed for process control. The Integrated Equipment Test (IET) facility was developed by the Consolidated Fuel Reprocessing Program (CFRP) in part to demonstrate new concepts for control of advanced nuclear fuel reprocessing plants. A demonstration of fuel reprocessing equipment automation using advanced instrumentation and a modern, microprocessor-based control system is nearing completion in the facility. This facility provides for the synergistic testing of all chemical process features of a prototypical fuel reprocessing plant that can be attained with unirradiated uranium-bearing feed materials. The unique equipment and mission of the IET facility make it an ideal test bed for automation studies. This effort will provide for the demonstration of the plant automation concept and for the development of techniques for similar applications in a full-scale plant. A set of preliminary recommendations for implementing process automation has been compiled. Some of these concepts are not generally recognized or accepted. The automation work now under way in the IET facility should be useful to others in helping avoid costly mistakes because of the underutilization or misapplication of process automation. 6 figs

Logistics in Namibia: Issues and challenges

Directory of Open Access Journals (Sweden)

Christopher J. Savage

2013-08-01

Full Text Available Logistics is perceived to be important for Namibia’s growth and development, but this may be a matter of conjecture as there is a dearth of documented information about the industry in Namibia. Furthermore, it is uncertain what the understanding of logistics is for key stakeholders in the country. This article reports on a project; the objectives were to address some of these issues and to lay the foundation for a more thorough investigation in the future. The findings of the initial project were disseminated in 2012 by: a conference paper showing the challenges and opportunities facing logistics in Namibia in 2012; a report; and through a Logistics and Transport Workshop held in Walvis Bay, Namibia in September 2012. These reports, additional interviews and subsequent discussions highlighted some potential opportunities and problems. This article summarises the project to date, showing the methodology and findings as updated by subsequent feedback and further interviews. The findings from key stakeholders of the logistics industry in Namibia include: universal agreement on the importance of logistics to Namibia; the variety in the understanding of the term logistics; the strength of the continuing influence of South Africa as the dominant economic power in southern Africa; and contrasting views on the main factors limiting logistics development, including infrastructure, attitude, government, customs, training, railways, corruption and driver shortage.

FUTURE CIRCULAR COLLIDER LOGISTICS STUDY

CERN Document Server

Beißert, Ulrike; Kuhlmann, Gerd; Nettsträter, Andreas; Prasse, Christian; Wohlfahrt, Andreas

2018-01-01

The Large Hadron Collider (LHC) at the European Organization for Nuclear Research CERN in Geneva is the largest and most powerful collider in the world. CERN and its research and experimental infrastructure is not only a focus for the science community but is also very much in the public eye. With the Future Circular Collider (FCC) Study, CERN has begun to examine the feasibility of a new underground accelerator ring with a length of approximately 100 kilometres. Logistics is of great importance for the construction, assembly and operation of the FCC. During the planning, construction and assembly of the LHC, logistics proved to be one of the key factors. As the FCC is even larger than the LHC, logistics will also become more and more significant. This report therefore shows new concepts, methods and analytics for logistics, supply chain and transport concepts as part of the FCC study. This report deals with three different logistics aspects for the planning and construction phase of FCC: 1. A discussion of d...

Exposure to trinitrotoluene and health effects among workers in an artillery and ammunition plant.

Science.gov (United States)

Kongtip, Pornpimol; Preklang, Smart; Yoosook, Witaya; Chantanakul, Suttinun

2012-06-01

To determine urinary trinitrotoluene (TNT), 2-amino-4, 6-dinitrotoluene (2ADNT) and 4-amino-2, 6-dinitrotoluene (4ADNT) and health effects upon workers in an ammunition plant. The urine samples from forty munition workers and forty office workers were monitored for TNT and its metabolites by gas chromatography-mass spectrometry. The workers were interviewed with a questionnaire. The median levels of TNT and its metabolites were 112.84 and ranged from non-detectable (ND) to 1,833.81 mg/L. Median levels for 2ADNT were 11.66, ranging from ND to 360.89 mg/L. Median levels for 4ADNT were 19.95 and ranged from ND to 314.28 mg/L. There were significant correlations between TNT and 2ADNT in urine (r = 0. 700, p-value workers reported eye, nose and throat irritations, weakness and headaches with considerably higher frequency than non-exposed workers. TNT levels in urine were strongly associated with 4ADNT and 2ADNT levels. Workers exposed to TNT complained of nose, throat and eye irritation, along with overall weakness and headaches.

NASA Space Rocket Logistics Challenges

Science.gov (United States)

Neeley, James R.; Jones, James V.; Watson, Michael D.; Bramon, Christopher J.; Inman, Sharon K.; Tuttle, Loraine

2014-01-01

The Space Launch System (SLS) is the new NASA heavy lift launch vehicle and is scheduled for its first mission in 2017. The goal of the first mission, which will be uncrewed, is to demonstrate the integrated system performance of the SLS rocket and spacecraft before a crewed flight in 2021. SLS has many of the same logistics challenges as any other large scale program. Common logistics concerns for SLS include integration of discreet programs geographically separated, multiple prime contractors with distinct and different goals, schedule pressures and funding constraints. However, SLS also faces unique challenges. The new program is a confluence of new hardware and heritage, with heritage hardware constituting seventy-five percent of the program. This unique approach to design makes logistics concerns such as commonality especially problematic. Additionally, a very low manifest rate of one flight every four years makes logistics comparatively expensive. That, along with the SLS architecture being developed using a block upgrade evolutionary approach, exacerbates long-range planning for supportability considerations. These common and unique logistics challenges must be clearly identified and tackled to allow SLS to have a successful program. This paper will address the common and unique challenges facing the SLS programs, along with the analysis and decisions the NASA Logistics engineers are making to mitigate the threats posed by each.

END-OF-USE PRODUCTS IN REVERSE LOGISTICS

OpenAIRE

Marta Starostka-Patyk

2007-01-01

Reverse logistics is a very useful tool for enterprises which have to deal with end-of-use products. Forward logistics is not able to manage them, because they show up on the beginning of reverse supply chain. That is the reason for growing importance of reverse flows. Reverse logistics is quite new logistics system. This paper presents the idea of reverse logistics and end-of-use products problems.

STUDY OF THE STATE OF LOGISTICS IN KAZAKHSTAN: PROSPECTS FOR DEVELOPMENT AND DEPLOYMENT OF TRANSPORT AND LOGISTICS CENTRES

Directory of Open Access Journals (Sweden)

Zhanarys RAIMBEKOV

2016-12-01

Full Text Available The creation and development of Kazakhstan as a trade, logistics and business hub of the region is on the agenda of the Government of Kazakhstan. To achieve this, central and local governments, private businesses invest in new infrastructure projects in logistics. The article investigates the problems of modern logistics infrastructure formation in the territory of the Republic of Kazakhstan. The survey results show that the attractiveness of Kazakhstan as a transport and logistics hub will depend on the state of logistics infrastructure, service quality, and technology used. Further development will largely depend on its ability to diversify and create logistics facilities with high added value. Priorities and the need for multi-level transport logistic centres have been defined; their development in domestic, export and transit directions has been described, both at the national and international levels and at the enterprise level as well.

Halal logistics: A marketing mix perspective

Directory of Open Access Journals (Sweden)

Abu Bakar Abdul Hamid

2014-12-01

Full Text Available Ḥalāl is no longer understood as solely concerning food consumption or ritual slaughter. It is at the centre of the global Muslim food industry and logistics is one of its driving forces. The growing demand for ḥalāl food integrity contributes to the need for ḥalāl logistics. However, ḥalāl logistics operation has thus far not been warmly received by the industry thus hampering the availability of such services. This conceptual study attempts to illuminate the issue by addressing ḥalāl logistics from a marketing perspective. The concept of marketing mix and how it can be practiced by industrial players in marketing or promoting ḥalāl logistics services underpins our discussion. Existing literature is reviewed and discussed to ascertain the link between ḥalāl logistics and the 7Ps of its marketing mix, namely, product, place, price, promotion, people, process, and programme.

E-LOGISTICS – MULTIMODAL TRANSPORT MANAGEMENT

Directory of Open Access Journals (Sweden)

Marcel LITRA

2013-05-01

Full Text Available The paper presents the role and the importance of logistics for products and services inorder to obtain the competitive advantage. After a short presentation of logistics evolution, we moveon to defining the logistics concept, respectively integrated logistics. The analysis of the logisticsactivities is based on the total cost concept and it has as a purpose the efficient and effectivemanagement of the physical flows of raw materials, materials and finite products, and of theinternational flows. The competitive advantage is ensured through the harmonization of the logisticsfunction with the other functions of the company and through the integration of the logistics chain ofall upstream and downstream organizations in order to ensure a high level of consumer service ateconomical costs under the farm of supply chain management. In the end we present the maintendencies in the evolution of logistics in the Romanian firms under the circumstances of the increaseof their international dimension.

A logistics professional

International Nuclear Information System (INIS)

Jaeaeskelaeinen, A.

1998-01-01

Finland's oil, chemicals, and energy company, Neste, has achieved an enviable standard of logistics serving the markets around the Baltic Rim. Neste's safe and efficient transportation services are handled by its own fleet of tankers, time-chartered vessels, contract road tankers, and rail. Neste's terminals play an important part in the company's logistics network. The company operates four terminals of its own in Finland, and works with other oil companies at three of their terminals. Neste's own terminals are located at the company's refineries at Porvoo and Naantali, and at Kokkola and Kemi on the Gulf of Bothnia. Outside Finland the completion of a new terminal at Riga in Latvia, to enhance the logistics services provided to Neste's network of service stations and direct sales customers in the Baltic countries. This joins a terminal at Muuga near Tallinn in Estonia, which has been operational for some five years. Construction work began on a terminal in St. Petersburg in December 1997 to serve customers in the St. Petersburg and Vyborg areas. Completion is scheduled for autumn 1999

Methodical approach to financial stimulation of logistics managers

Directory of Open Access Journals (Sweden)

Melnykova Kateryna V.

2014-01-01

Full Text Available The article offers a methodical approach to financial stimulation of logistics managers, which allows calculation of the incentive amount with consideration of profit obtained from introduction of optimisation logistics solutions. The author generalises measures, which would allow increase of stimulation of labour of logistics managers by the enterprise top managers. The article marks out motivation factors, which exert influence upon relation of logistics managers to execution of optimisation logistical solutions, which minimise logistical costs. The author builds a scale of financial encouragement for introduction of optimisation logistical solutions proposed by logistics managers. This scale is basic for functioning of the encouragement system and influences the increase of efficiency of logistics managers operation and also optimisation of enterprise logistical solutions.

Logistics in smallpox: the legacy.

Science.gov (United States)

Wickett, John; Carrasco, Peter

2011-12-30

Logistics, defined as "the time-related positioning of resources" was critical to the implementation of the smallpox eradication strategy of surveillance and containment. Logistical challenges in the smallpox programme included vaccine delivery, supplies, staffing, vehicle maintenance, and financing. Ensuring mobility was essential as health workers had to travel to outbreaks to contain them. Three examples illustrate a range of logistic challenges which required imagination and innovation. Standard price lists were developed to expedite vehicle maintenance and repair in Bihar, India. Innovative staffing ensured an adequate infrastructure for vehicle maintenance in Bangladesh. The use of disaster relief mechanisms in Somalia provided airlifts, vehicles and funding within 27 days of their initiation. In contrast the Expanded Programme on Immunization (EPI) faces more complex logistical challenges. Copyright © 2011 Elsevier Ltd. All rights reserved.

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 2: OSSA integrated logistics support strategy

Science.gov (United States)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The purpose is to outline an Office of Space Science and Applications (OSSA) integrated logistics support strategy that will ensure effective logistics support of OSSA payloads at an affordable life-cycle cost. Program objectives, organizational relationships, and implementation of the logistics strategy are discussed.

Cost Calculation Model for Logistics Service Providers

Directory of Open Access Journals (Sweden)

Zoltán Bokor

2012-11-01

Full Text Available The exact calculation of logistics costs has become a real challenge in logistics and supply chain management. It is essential to gain reliable and accurate costing information to attain efficient resource allocation within the logistics service provider companies. Traditional costing approaches, however, may not be sufficient to reach this aim in case of complex and heterogeneous logistics service structures. So this paper intends to explore the ways of improving the cost calculation regimes of logistics service providers and show how to adopt the multi-level full cost allocation technique in logistics practice. After determining the methodological framework, a sample cost calculation scheme is developed and tested by using estimated input data. Based on the theoretical findings and the experiences of the pilot project it can be concluded that the improved costing model contributes to making logistics costing more accurate and transparent. Moreover, the relations between costs and performances also become more visible, which enhances the effectiveness of logistics planning and controlling significantly

THEORETICAL FRAMES FOR DESIGNING REVERSE LOGISTICS PROCESSES

OpenAIRE

Janusz K. Grabara; Sebastian Kot

2009-01-01

Logistics processes of return flow became more and more important in present business practice. Because of better customer satisfaction, environmental and financial aspects many enterprises deal with reverse logistics performance. The paper is a literature review focused on the design principles of reverse logistics processes Keywords: reverse logistics, designing.

Outsourcing of Transport and Logistics Services

Directory of Open Access Journals (Sweden)

Anton Ogorelc

2007-11-01

Full Text Available The author presents the results of the research in five parts,which are interconnected. After the introduction, in part two,entitled A Framework for Logistics Outsourcing Decisions,theoretical characteristics of outsourcing are presented. Partthree, Core Competences and Outsourcing, describes the logisticscompetences. Part 4, Transp011 and Logistics Outsourcingin Europe, discusses the trends in logistics development andoutsourcing. The paper will assist managers responsible for thedevelopment of logistics strategies. The paper offers a uniquebuyer-supplier pwtnership framework by proposing that the logisticsoutsourcing will increase the competitive advantage ofmanufacturing firms.

Key Trends Shaping the Global Logistics Environment

DEFF Research Database (Denmark)

Handfield, Robert; Straube, Frank; Pfohl, Hans-Christian

A summary from the full study “Trends and Strategies in Logistics and Supply Chain Management. Embracing Global Logistics Complexity to Drive Market Advantage” (2013).......A summary from the full study “Trends and Strategies in Logistics and Supply Chain Management. Embracing Global Logistics Complexity to Drive Market Advantage” (2013)....

An investigation into the factors that influence toolmark identifications on ammunition discharged from semi-automatic pistols recovered from car fires.

Science.gov (United States)

Collender, Mark A; Doherty, Kevin A J; Stanton, Kenneth T

2017-01-01

Following a shooting incident where a vehicle is used to convey the culprits to and from the scene, both the getaway car and the firearm are often deliberately burned in an attempt to destroy any forensic evidence which may be subsequently recovered. Here we investigate the factors that influence the ability to make toolmark identifications on ammunition discharged from pistols recovered from such car fires. This work was carried out by conducting a number of controlled furnace tests in conjunction with real car fire tests in which three 9mm semi-automatic pistols were burned. Comparisons between pre-burn and post burn test fired ammunition discharged from these pistols were then performed to establish if identifications were still possible. The surfaces of the furnace heated samples and car fire samples were examined following heating/burning to establish what factors had influenced their surface morphology. The primary influence on the surfaces of the furnace heated and car fire samples was the formation of oxide layers. The car fire samples were altered to a greater extent than the furnace heated samples. Identifications were still possible between pre- and post-burn discharged cartridge cases, but this was not the case for the discharged bullets. It is suggested that the reason for this is a difference between the types of firearms discharge-generated toolmarks impressed onto the base of cartridge cases compared to those striated along the surfaces of bullets. It was also found that the temperatures recorded in the front foot wells were considerably less than those recorded on top of the rear seats during the car fires. These factors should be assessed by forensic firearms examiners when performing casework involving pistols recovered from car fires. Copyright © 2016 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

76 FR 54468 - Petra Pet, Inc. (a/k/a Petrapport) v. Panda Logistics Limited; Panda Logistics Co., Ltd. (f/k/a...

Science.gov (United States)

2011-09-01

... Logistics Limited; Panda Logistics Co., Ltd. (f/k/a panda Int'l Transportation Co., Ltd.); and RDM Solutions... ``Complainant,'' against Respondents Panda Logistics Limited, Panda Logistics Co., Ltd. (f/k/a Panda Int'l... alleges that Respondents Panda Logistics Limited and Panda Logistics Co., Ltd., are each a non-vessel...

Logistics hardware and services control system

Science.gov (United States)

Koromilas, A.; Miller, K.; Lamb, T.

1973-01-01

Software system permits onsite direct control of logistics operations, which include spare parts, initial installation, tool control, and repairable parts status and control, through all facets of operations. System integrates logistics actions and controls receipts, issues, loans, repairs, fabrications, and modifications and assets in predicting and allocating logistics parts and services effectively.

Building Combat Strength through Logistics: Translating the New Air Force Logistics Concept of Operations into Action

Science.gov (United States)

1988-03-31

wholesale logistics systems. Rapid reprogramming , priority distribution and repair of critical logistics resources, regional logistics control networks, and...between the id, the ego, and th- superego. Ideals impact conscious and subconscious thoughts and actions that influence our values and shape our conduct...exploited under peace and wartime conditions. Rapid and effective reprogramming actions in response to changing operational needs are the key to high

Logistic regression applied to natural hazards: rare event logistic regression with replications

OpenAIRE

Guns, M.; Vanacker, Veerle

2012-01-01

Statistical analysis of natural hazards needs particular attention, as most of these phenomena are rare events. This study shows that the ordinary rare event logistic regression, as it is now commonly used in geomorphologic studies, does not always lead to a robust detection of controlling factors, as the results can be strongly sample-dependent. In this paper, we introduce some concepts of Monte Carlo simulations in rare event logistic regression. This technique, so-called rare event logisti...

Outsourcing Operational Logistics: Buyer Beware

National Research Council Canada - National Science Library

Woody, Lamont

2003-01-01

One of the key tasks from U.S. Secretary of Defense Donald H. Rumsfeld to his Service Chiefs is to reduce DOD's overall logistic cost and footprint while transforming the warfighter-to-logistics (tooth-to-tail) force structure...

COSTS FOR IMPLEMENTING LOGISTICS INTO THE COMPANY

OpenAIRE

Mariana Man; Maria Nowicka-Skowron

2010-01-01

The ways of approaching the logistic problems need the use of some varied techniques and means, and the elaboration of a logistic project – which would aim the entire company – mobilises multiple personnel for a period of a few months and claims the intervention of logisticians within the logistic consultancy office, whom shall also act after putting the logistic project into practice. The accomplishment of any logistic wide change within the company needs an array of activities that may be g...

Case Study on Logistics Performance

Directory of Open Access Journals (Sweden)

Shahryar Sorooshian

2013-05-01

Full Text Available The paper presents research carried out at a medium‐size manufacturing organization in east Asia. The study tries to highlight the importance of supply chain management; specifically, our aim for this study is to understand logistics and performance measurement in the logistics and supply chain, and we include a theoretical discussion of online data collected and a case study of the logistic performance of a real organization. The study also examines the performance of the selected company, identifies the problems and provides recommendations for improvements. This study can be a guide for business advisers and those interested in analysing company performance, especially from a logistics viewpoint. We also suggest the methodology of this case study for those who want to have a better understanding of a business environment before starting their own business, or for benchmarking practice during strategic planning.

Comparison of multinomial logistic regression and logistic regression: which is more efficient in allocating land use?

Science.gov (United States)

Lin, Yingzhi; Deng, Xiangzheng; Li, Xing; Ma, Enjun

2014-12-01

Spatially explicit simulation of land use change is the basis for estimating the effects of land use and cover change on energy fluxes, ecology and the environment. At the pixel level, logistic regression is one of the most common approaches used in spatially explicit land use allocation models to determine the relationship between land use and its causal factors in driving land use change, and thereby to evaluate land use suitability. However, these models have a drawback in that they do not determine/allocate land use based on the direct relationship between land use change and its driving factors. Consequently, a multinomial logistic regression method was introduced to address this flaw, and thereby, judge the suitability of a type of land use in any given pixel in a case study area of the Jiangxi Province, China. A comparison of the two regression methods indicated that the proportion of correctly allocated pixels using multinomial logistic regression was 92.98%, which was 8.47% higher than that obtained using logistic regression. Paired t-test results also showed that pixels were more clearly distinguished by multinomial logistic regression than by logistic regression. In conclusion, multinomial logistic regression is a more efficient and accurate method for the spatial allocation of land use changes. The application of this method in future land use change studies may improve the accuracy of predicting the effects of land use and cover change on energy fluxes, ecology, and environment.

Conference on Logistics Management : Contributions of the Section Logistics of the German Academic Association for Business Research

CERN Document Server

Spengler, Thomas; Brinkmann, Jan; Grunewald, Martin

2016-01-01

This contributed volume contains the selected and thoroughly reviewed research papers presented at the conference on logistics management LM2015 in Braunschweig, Germany. The conference of the special interest group in logistics of the German Academic Association for Business Research (VHB) was held in conjunction with the special interest group on production of the VHB. Thus, the papers reflect the current state-of-the-art in logistics and supply chain management while focusing especially on aspects of production logistics, i.e., facility layout, inventory management, line configuration, or flexible production.

LOGISTIC ACTIVITIES IN BELARUS: TRENDS AND CHALLENGES

Directory of Open Access Journals (Sweden)

P. V. Bozhanov

2017-01-01

Full Text Available Main results of investigations on logistics activities in the Republic of Belarus at year-end 2016 are presented in the paper. The paper identifies and analyzes basic components of this activity on the basis of economic evaluation of indices presented in annual State statistical reporting on logistics and transport and freight forwarding activities of the Republican organizations according to form 1-logistics (Mintrans – Ministry of Transport and Communications of the Republic of Belarus, a report of the Ministry of Transport and Communications of the Republic of Belarus on the results of the implementation of Republican Program for development of logistics systems and transit potential of the Republic of Belarus for the period of 2016–2020, World Bank reports on logistics performance index, some indices of logistics infrastructure position and also results of electronic questionnaire of the largest logistics centers of the Republic of Belarus. Methods of comparative analysis, generalization and economic analysis have been used in the process of research. The analysis has shown that a network of logistics centers with various specialization and forms of property are located and operating in all regions of the Republic of Belarus. Most of them are situated in the Minsk region near the II and IX trans-European transport corridors and in the Brest region near the border with Poland. Structure of the logistics centers includes temporary storage warehouses, customs warehouses, warehouses for general use, container terminals, car parking, customs clearance office, and automotive, railway and other cargo transport facilities. Indices of logistics activity in the Republic of Belarus demonstrate its development in 2016. Storage space of logistics centers and main financial and volumetric indices of logistics activity which are included in the State statistical reporting have been increased during in recent times. These facts testify to the demand for

Transport, logistics and the region

NARCIS (Netherlands)

Langen, de P.W.

2010-01-01

Cargo transport and logistics have a huge impact on sustainable (regional) economic development. Two broad (policy) challenges are center stage: enhancing co-location of logistics activities and improving efficiency in intermodal transport chains. Academic research can provide relevant insights for

OWI transportation/logistics program

International Nuclear Information System (INIS)

Shappert, L.B.; Joy, D.S.; Heiskell, M.M.; Turner, D.W.

1978-01-01

In development of a comprehensive plan to assure the availability of a transport system by 1985 capable of moving commercial radioactive wastes to federal waste repositories, a series of concerns were identified as having the potential to interfere seriously with the overall objective. These are tabulated and briefly reviewed. Activities to counteract these concerns were formulated. Logistics models were then developed. The spent fuel logistics model is described

Planning and management of logistic cycle

Directory of Open Access Journals (Sweden)

V. N. Kudashkin

2017-01-01

Full Text Available We are considering planning and managing of logistic cycle, its impact on the content of the main processes that comprise the cycle to implement the order for the supply of material resources for industrial consumption, as well as its practical use, effectiveness, and prospects.This research paper is made on the basis of the information, received from textbooks and scientific literature of domestic and foreign authors, as well as from other sources. The main methods, used in this work are as follows: method of system analysis, method of the theory of operations’ research, prognostics. Application of these methods allows forecasting material flows, creating the integrated management systems and controlling their movements, developing systems of logistic service, to optimize supply stock and solve a number of other tasks.A logistic approach to form a modern system of logistics will save time, reduce costs for the purchase of material resources, their delivery and storage.In modern conditions of the market economy, the considered time parameters of the logistic chain are essential for manufacturing enterprises because their records significantly increase the efficiency of the logistical system.Logistics is equipped with a special complex of economic and mathematical models, the main feature of which is the adaptability, i.e. ability to solve complex optimization problems in the operational mode and in the process of the management of material flows. The primary role of these models in a market economy is to identify quickly points of compromise.Dynamics to functional cycles gives the necessity to align resource needs «input» and «output». «Input» functional cycle is an order that specifies requirements for a product or service. Logistical system, which is able to complete fully the order of any size, as a rule, needs in the «combined» functional cycles, including different transactions and operations at different stages. The «output» of

Lean automation development : applying lean principles to the automation development process

OpenAIRE

Granlund, Anna; Wiktorsson, Magnus; Grahn, Sten; Friedler, Niklas

2014-01-01

By a broad empirical study it is indicated that automation development show potential of improvement. In the paper, 13 lean product development principles are contrasted to the automation development process and it is suggested why and how these principles can facilitate, support and improve the automation development process. The paper summarises a description of what characterises a lean automation development process and what consequences it entails. Main differences compared to current pr...

Purposeful selection of variables in logistic regression

Directory of Open Access Journals (Sweden)

Williams David Keith

2008-12-01

Full Text Available Abstract Background The main problem in many model-building situations is to choose from a large set of covariates those that should be included in the "best" model. A decision to keep a variable in the model might be based on the clinical or statistical significance. There are several variable selection algorithms in existence. Those methods are mechanical and as such carry some limitations. Hosmer and Lemeshow describe a purposeful selection of covariates within which an analyst makes a variable selection decision at each step of the modeling process. Methods In this paper we introduce an algorithm which automates that process. We conduct a simulation study to compare the performance of this algorithm with three well documented variable selection procedures in SAS PROC LOGISTIC: FORWARD, BACKWARD, and STEPWISE. Results We show that the advantage of this approach is when the analyst is interested in risk factor modeling and not just prediction. In addition to significant covariates, this variable selection procedure has the capability of retaining important confounding variables, resulting potentially in a slightly richer model. Application of the macro is further illustrated with the Hosmer and Lemeshow Worchester Heart Attack Study (WHAS data. Conclusion If an analyst is in need of an algorithm that will help guide the retention of significant covariates as well as confounding ones they should consider this macro as an alternative tool.

Future electric scenarios for urban logistics

Energy Technology Data Exchange (ETDEWEB)

2012-07-01

This report is produced by the SAFE Urban Logistics project - a Norden Energy and Transport project that aims to study and analyse the prospect of integrating electric vehicles in the goods distribution of urban areas. The goal of the project is to create next practice solutions, offer promising opportunities for urban logistics operations, in order to become both more efficient and more environmentally sustainable. The SAFE Urban Logistics aims to match business models for making the application of electric vehicles within inner city logistics happen. The project will also create proposals for sustainable suitable technical solutions associated with these business models. This is one out of four reports produced by the project. Read more about the project and get access to all the reports on www.safeproject.eu. This report is the final output of the project and describes four scenarios for the future of urban logistics based on the urbanization and potential political interventions. The described scenarios will be evaluated on environmental effects and describe a potential idea that can bring this future one step closer. An array of potential business and logistics models as well as technical solutions that could be applied in order to integrate EV's on a larger basis are added at the end of the document. It is supposed to act as inspiration for the strategic development of logistics companies as well as local and governmental policies. Knowledge and experiences in this report are mainly taken from Denmark, Norway and Sweden. When it comes to logistic recommendations and experiences, influence from other parts of Europe have also been included. (Author)

Future electric scenarios for urban logistics

Energy Technology Data Exchange (ETDEWEB)

2012-07-01

This report is produced by the SAFE Urban Logistics project - a Norden Energy and Transport project that aims to study and analyse the prospect of integrating electric vehicles in the goods distribution of urban areas. The goal of the project is to create next practice solutions, offer promising opportunities for urban logistics operations, in order to become both more efficient and more environmentally sustainable. The SAFE Urban Logistics aims to match business models for making the application of electric vehicles within inner city logistics happen. The project will also create proposals for sustainable suitable technical solutions associated with these business models. This is one out of four reports produced by the project. Read more about the project and get access to all the reports on www.safeproject.eu. This report is the final output of the project and describes four scenarios for the future of urban logistics based on the urbanization and potential political interventions. The described scenarios will be evaluated on environmental effects and describe a potential idea that can bring this future one step closer. An array of potential business and logistics models as well as technical solutions that could be applied in order to integrate EV's on a larger basis are added at the end of the document. It is supposed to act as inspiration for the strategic development of logistics companies as well as local and governmental policies. Knowledge and experiences in this report are mainly taken from Denmark, Norway and Sweden. When it comes to logistic recommendations and experiences, influence from other parts of Europe have also been included. (Author)

Both Automation and Paper.

Science.gov (United States)

Purcell, Royal

1988-01-01

Discusses the concept of a paperless society and the current situation in library automation. Various applications of automation and telecommunications are addressed, and future library automation is considered. Automation at the Monroe County Public Library in Bloomington, Indiana, is described as an example. (MES)

Logistics Sourcing Strategies in Supply Chain Design

OpenAIRE

Liu, Liwen

2007-01-01

A company's logistics sourcing strategy determines whether it structures and organizeslogistics within the company or company group or integrates logistics upstream and downstreamin the supply chain. First, three different types of logistics sourcing strategies in supply chaindesign are described and the theoretical background for the development of these strategies,including both transaction cost theory and network theory, is analyzed. Two special casesabout logistics sourcing strategy decis...

Automated Groundwater Screening

International Nuclear Information System (INIS)

Taylor, Glenn A.; Collard, Leonard B.

2005-01-01

The Automated Intruder Analysis has been extended to include an Automated Ground Water Screening option. This option screens 825 radionuclides while rigorously applying the National Council on Radiation Protection (NCRP) methodology. An extension to that methodology is presented to give a more realistic screening factor for those radionuclides which have significant daughters. The extension has the promise of reducing the number of radionuclides which must be tracked by the customer. By combining the Automated Intruder Analysis with the Automated Groundwater Screening a consistent set of assumptions and databases is used. A method is proposed to eliminate trigger values by performing rigorous calculation of the screening factor thereby reducing the number of radionuclides sent to further analysis. Using the same problem definitions as in previous groundwater screenings, the automated groundwater screening found one additional nuclide, Ge-68, which failed the screening. It also found that 18 of the 57 radionuclides contained in NCRP Table 3.1 failed the screening. This report describes the automated groundwater screening computer application

Information Logistics Research report 2

NARCIS (Netherlands)

Willems, A.; Hajdasinski, A.K.; Willems, J.

2009-01-01

The goal of this research report is to further explore the concept of Information Logistics (IL), which refers to the usage and dispatch of information and methods of logistics able to support those processes. This report is based upon 6 questions that examine IL in organizations, healthcare

Simulation Integrated Design for Logistics

NARCIS (Netherlands)

Veeke, H.P.M.

2003-01-01

The design of an innovative logistic system is a complex problem in the solution of which many disciplines are involved. Each discipline developed its own way of conceptual modeling for a logistic system based on a mono disciplinary perception. In essence this leads to a communication problem

Production-logistic system in the aspect of strategies for production planning and control and for logistic customer service

Directory of Open Access Journals (Sweden)

Łukasz Hadaś

2014-09-01

Full Text Available Background: The authors made multi-dimensional review of production and logistic strategies in order to prove their coherence in shaping internal and external supply chain. The paper is concluded with definition of production-logistic system as an object of modeling in transformation of business systems of manufacturing companies. Material and methods: The paper is based on analysis of state of the art presented in the literature on the subject of production and logistics strategies. Publications of key importance were selected to identify genesis and basic assumptions of strategies and their functioning. Comparative synthesis of logistic and production strategies identified is developed with respect to authors' experience in application of predefined tools and methods characteristic for strategies identified. Results: The result of the work conducted is consolidation of production and logistic strategies according to multi-variant customer service and original definition of production and logistic system. Conclusions: Production system and logistic system can and should be treated as equal elements in context of material flows management in internal and external supply chains. Such approach enables modeling of both systems as coherent elements realizing selected strategy of customer service.     

Integrated tracking of components by engineering and logistics utilizing logistics asset tracking system

Science.gov (United States)

Renfroe, Michael B.; Mcdonald, Edward J.; Bradshaw, Kimberly

1988-01-01

The Logistics Asset Tracking System (LATS) devised by NASA contains data on Space Shuttle LRUs that are daily updated to reflect such LRU status changes as repair due to failure or modification due to changing engineering requirements. The implementation of LATS has substantially increased personnel responsiveness, preventing costly delays in Space Shuttle processing and obviating hardware cannibalization. An evaluation is presented of LATS achievements in the direction of an integrated logistical support posture.

Conference Logistics Management 2013

CERN Document Server

Haasis, Hans-Dietrich; Kopfer, Herbert; Kotzab, Herbert; Schönberger, Jörn

2015-01-01

This contributed volume contains the collected research papers presented at the Logistik-Management-Konferenz 2013 organized by the VHB Wissenschaftliche Kommission Logistik, held in Bremen 2013. The papers reflect the current state-of-the-art in logistics and supply chain management, focusing on environmental sustainability in logistics and supply chain network dynamics and control. The target audience primarily comprises research experts in the field as well as practitioners but the book may also be beneficial for graduate students.

Cooperation between partners in logistics outsourcing

Directory of Open Access Journals (Sweden)

Andreja KRIŽMAN

2009-01-01

Full Text Available The purpose of this article is to present the research results from a study of impact of cooperation between logistics service providers (LSP and their customers on logistics outsourcing performance conducted in the Slovenian market. On the basis of the existing literature and some new argumentations, derived from in-depth interviews with logistics experts of providers and customers, the measurement and structural models were empirically analyzed. Existing measurement scales for the constructs of cooperation, and outsourcing performance were slightly modified for this analysis. Their purification and measurement for validity and reliability were performed. Multivariate statistical methods (EFA, CFA and SEM - Partial Least Squares were utilized and hypotheses were tested. Cooperation between partners has a significant impact on the relationship and reduces problems in logistics performance. Cooperation in the model explain 58.5% of the variance of goal achievement and 36.6% of the variance of goal exceedance logistics of outsourcing performance.

SELECTED PROBLEMS OF REVERSE LOGISTICS IN POLAND

OpenAIRE

Agata Mesjasz-Lech

2009-01-01

This paper presents the essence of reverse logistics and directions of physical and information flows between logistic network partners. It also analyses effects of implementation of the principles of reverse logistics in Poland in the years 2004-2007

Sustainable logistics. Sustainability of logistic centres by means of evaluation of emissions, protection of ressources and energy efficiency; Sustainable logistics. Nachhaltigkeit von Logistikzentren durch Emissionsbewertung, Ressourcenschonung und Energieeffizienz

Energy Technology Data Exchange (ETDEWEB)

Zadek, Hartmut; Schulz, Robert (eds.)

2011-07-01

The discussion on climate change and availability of limited resources shows that resource conservation and energy efficiency in today's targets of companies are under-represented. Cost efficiency and increase of the shareholder value with respect to a measurable success determine the daily operations. The author of the contribution under consideration considers logistics centers and supply processes for manufacturing companies. After describing basic approaches to sustainability in logistics an inventory follows based on a study of logistics service providers and manufacturing companies. Methods and tools for the evaluation of CO{sub 2} emissions and resource consumption are presented. A guideline for the development of buildings, energy audits and renewable energies is considered, identified solutions to energy-efficient logistics and modernization are given, selected best-practice examples of sustainable logistics centers are presented. The contribution ends with strategic derivation targeted at policy and state as well as companies and management.

Logistic Regression: Concept and Application

Science.gov (United States)

Cokluk, Omay

2010-01-01

The main focus of logistic regression analysis is classification of individuals in different groups. The aim of the present study is to explain basic concepts and processes of binary logistic regression analysis intended to determine the combination of independent variables which best explain the membership in certain groups called dichotomous…

Logistics Support of Naval Expeditionary Units

National Research Council Canada - National Science Library

Nilsen, Jan

2004-01-01

.... Based on literature from strategic management, logistics, and supply chain management, the research evaluates the existing theater logistics capabilities and the requirements of the supported expeditionary units...

Understanding logistic regression analysis

OpenAIRE

Sperandei, Sandro

2014-01-01

Logistic regression is used to obtain odds ratio in the presence of more than one explanatory variable. The procedure is quite similar to multiple linear regression, with the exception that the response variable is binomial. The result is the impact of each variable on the odds ratio of the observed event of interest. The main advantage is to avoid confounding effects by analyzing the association of all variables together. In this article, we explain the logistic regression procedure using ex...

District logistics analysis of the Viborg county case study

DEFF Research Database (Denmark)

Hansen, Leif Gjesing; Lise Drewes, Nielsen

The paper presents results of  the logistical flows and logistical organisation used in a district logistics analysis in Viborg county, Denmark.......The paper presents results of  the logistical flows and logistical organisation used in a district logistics analysis in Viborg county, Denmark....

Automated model building

CERN Document Server

Caferra, Ricardo; Peltier, Nicholas

2004-01-01

This is the first book on automated model building, a discipline of automated deduction that is of growing importance Although models and their construction are important per se, automated model building has appeared as a natural enrichment of automated deduction, especially in the attempt to capture the human way of reasoning The book provides an historical overview of the field of automated deduction, and presents the foundations of different existing approaches to model construction, in particular those developed by the authors Finite and infinite model building techniques are presented The main emphasis is on calculi-based methods, and relevant practical results are provided The book is of interest to researchers and graduate students in computer science, computational logic and artificial intelligence It can also be used as a textbook in advanced undergraduate courses

WHY DO LOGISTICS AND TRANSPORT MATTER FOR DEVELOPMENT

Directory of Open Access Journals (Sweden)

Nedelescu-Ionescu Daniela

2014-07-01

Full Text Available In face of the challenges of global competition, business firms are concentrating more on the needs of customers and seeking ways to reduce costs, improve quality and meet the ever-rising expectation of their customers. To these ends, many of them have identified logistics as an area to build cost and service advantages. Logistical activities have always been vital to organizations, and therefore business logistics and supply chain management represents a synthesis of many concepts, principles, and methods from the more traditional areas of production, purchasing, transportation, economics, as well as from the disciplines of applied mathematics, and organizational behaviour. It concentrates on important activities of management such as planning, organizing, and controlling, and also on a three-way relationship of related transportation, inventory, and location strategies, which are at the heart of good logistics planning and decision making. Selecting a good logistics strategy may yield a competitive advantage. Transportation provides the flow of materials, products and persons between production facilities, warehouses, distribution centers, terminals and customer locations. The progress in techniques and management principles improves the moving load, delivery speed, service quality, operation costs, the usage of facilities and energy saving. A strong system needs a clear frame of logistics and a proper transport implements and techniques to link the producing procedures. The transportation takes a crucial part in the management of logistic. Without well-developed transportation systems, logistics could not bring its advantages into full play. A good transport system in logistics activities could provide better logistics efficiency, reduce operation cost, and promote service quality. The process determines the efficiency of moving products and energy saving. Improvements in transportation and logistics make valuable contribution to production

Logistic service providers and sustainable physical distribution

Directory of Open Access Journals (Sweden)

Stef Weijers

2012-06-01

Full Text Available Background: Logistic Service Providers main concern was to ensure reliability for a low price (Christopher, 2005. Dutch Logistic Service Providers still have these two aspects at the top of their list, but also have to take in a new aspect: sustainability. 88% Of the investigated Logistic Service Providers have included sustainability in the company's goals. These Logistic Service Providers have developed different strategies to achieve a higher level of sustainability. This paper presents the results of a study into what Logistic Service Providers say what they are doing, or intend to do, to improve sustainability for their transport services. In this way insight is given in the attitude of Dutch Logistic Service Providers towards sustainability and how they intend to translate this into business practise: internal solutions or new methods incorporating external partners. Methods: Various methods of the investigations were used, among which the analysis of the statements about the sustainabilityon the websites of various companies as well as the questionnaire per Internet. The research covered 50 largest logistics companies operating in the Netherlands and 60 companies that competed for the award "Lean and Green" advertised in the Netherlands. In addition, the Internet survey was answered by 41 companies that belong to the network of our university. Results: The investigation has shown that sustainability is handled by the logistics company as an integral part of the corporate strategy. In contrast, shippers depend in the choice of logistics services primarily on such classical aspects as the reliability or the price and the sustainability play a minor role. Conclusions: Trying to find methods to improve the sustainability, Dutch logistics service providers, in the first place, look for solutions that increase the efficiency and therefore the cost reduction potential. Solutions, which require the involvement of clients, were less often

Accumulations and development in commercial logistics

OpenAIRE

Ion Schileru

2008-01-01

The work presents a connotative periplus and an evaluation of one of the most dynamic business fields- logistics. Although used for a long time in the military department, logistics has affirmed itself relatively recent in business field, where it brought revolutionary contributions and where it has a privileged statute. There are presented particular significations of logistics from some of the application fields: production, distribution, merchandise study. In addition, the whole vision of ...

Research on 6R Military Logistics Network

Science.gov (United States)

Jie, Wan; Wen, Wang

The building of military logistics network is an important issue for the construction of new forces. This paper has thrown out a concept model of 6R military logistics network model based on JIT. Then we conceive of axis spoke y logistics centers network, flexible 6R organizational network, lean 6R military information network based grid. And then the strategy and proposal for the construction of the three sub networks of 6Rmilitary logistics network are given.

A FRAMEWORK FOR STRUCTURING CITY LOGISTICS INITIATIVES

OpenAIRE

Snežana Tadić; Slobodan Zečević

2016-01-01

Interest in the problems and conceptual solutions for city logistics is increasing each year. City is the place of largest concentration of economic and social activities, and logistics is very important for the sustainability and the economy of the city. Numerous research projects indicate that the state of urban logistics is quite critical. City logistics system is extremely complex, with a large number of participants with different roles, problems, interests and goals. They all want an at...

Urban logistics profile – Yogyakarta city, Indonesia

Directory of Open Access Journals (Sweden)

Maria Sri Asih Anna

2018-01-01

Full Text Available In recent years, more rural areas are becoming urban areas accompanied by escalation of logistics activities. Unlike passenger transport, the planning, policy and control of freight transport in developing countries have not been integrated into a reliable and efficient logistics system. Therefore, generating city logistics profile is necessary in order to support the planning of urban logistics system. This study aims to establish a logistics profile of Yogyakarta city, Indonesia, by dividing urban zones into several homogeneous groups, judging from several aspects, including city area features, product characteristics and agents/delivery profile. Logistics profile variables were calculated based on administrative boundaries, resulting in 45 areas to be investigated. Profiles were matched in groups of homogeneous stores (A, large commercial stores (C and residential areas with local trade (D,with one overlapping profile, i.e. profile A and profile D, in some locations in the middle of the city.

An Exploratory Analysis of Reverse Logistics in Flanders

NARCIS (Netherlands)

Verstrepen, Sven; Cruijssen, Frans; Brito, Marisa P De; Dullaert, Wout

2007-01-01

This paper reports on a reverse logistics survey of shippers and logistics service providers in Flanders, one of the leading logistics regions in Europe. We characterise the reverse logistics activities with respect to return reasons, recovery options, outsourcing, lifecycle length and value of

Decision support modeling for sustainable food logistics management

NARCIS (Netherlands)

Soysal, M.

2015-01-01

Summary

For the last two decades, food logistics systems have seen the transition from traditional Logistics Management (LM) to Food Logistics Management (FLM), and successively, to Sustainable Food Logistics Management (SFLM). Accordingly, food industry has been subject to the recent

OUTBOUND LOGISTICS MANAGEMENT IN MANUFACTURING COMPANIES IN GHANA

OpenAIRE

Kwame Owusu Kwateng; John Frimpong Manso; Richard Osei-Mensah

2014-01-01

The optimization of outbound logistics operations through consolidation and collaboration using a third party logistics provider has potential to contribute to the profitability of an organization by lowering the cost of warehousing and transportation. The purpose of this paper is to assess outbound logistics of a manufacturing company (Guinness Ghana Breweries Limited) using the services of a third party logistics provider (DHL). Empirical research was employed to explore outbound logistics ...

INTRALOG, intelligent autonomous truck applications in Logistics

NARCIS (Netherlands)

MSc Berry Gerrits; Dr. Frans Tillema; MMC A.F. Spruijt; MSc Leo Buning

2016-01-01

INTRALOG is a project, to better use of materials, there by leading to improvements for People (better safety, lower physical work load), Planet (lower emissions and energy/ fuel con started September 2015, in which Automated Guided Truck Applications will be developed. Automated systems typically

Design for logistics to gain competitive advantage

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Biskoptsø, Rogvi

2015-01-01

. Considering logistical requirements in design of a product which is heavy and bulky and involves significant logistics costs enabled to firm to gain competitiveness. The exercise underscored the importance of understanding logistical requirements, freight costs and dimensional constraints early in the design...... phase which is usually neglected by start-up firms focused on the engineering driven innovativeness of the products. The processes developed along with guidelines facilitate future use which can help such firms to proactively consider logistics requirements at the design stage....

Rise of humanitarian logistics

CSIR Research Space (South Africa)

Maspero, EL

2008-07-01

Full Text Available but was described as fairly routine for a company of Walmart’s size with 117 distribution centres spread around the country. The nonchalant response by Rollin Ford, (Walmart’s executive vice president of logistics and supply chain) says it all, “that’s what we do...%20and%20challenges%22 [3] Boorstin, J. 2005. New lessons to learn. Fortune. 3 October. [4] Davidson, A.L. 2006. Key Performance Indicators in Humanitarian Logistics. MLOG Thesis, 2006. Viewed 24 October 2006. [5] http...

78 FR 53466 - Modification of Two National Customs Automation Program (NCAP) Tests Concerning Automated...

Science.gov (United States)

2013-08-29

... Customs Automation Program (NCAP) Tests Concerning Automated Commercial Environment (ACE) Document Image... National Customs Automation Program (NCAP) tests concerning document imaging, known as the Document Image... the National Customs Automation Program (NCAP) tests concerning document imaging, known as the...

Reverse logistics in the construction industry.

Science.gov (United States)

Hosseini, M Reza; Rameezdeen, Raufdeen; Chileshe, Nicholas; Lehmann, Steffen

2015-06-01

Reverse logistics in construction refers to the movement of products and materials from salvaged buildings to a new construction site. While there is a plethora of studies looking at various aspects of the reverse logistics chain, there is no systematic review of literature on this important subject as applied to the construction industry. Therefore, the objective of this study is to integrate the fragmented body of knowledge on reverse logistics in construction, with the aim of promoting the concept among industry stakeholders and the wider construction community. Through a qualitative meta-analysis, the study synthesises the findings of previous studies and presents some actions needed by industry stakeholders to promote this concept within the real-life context. First, the trend of research and terminology related with reverse logistics is introduced. Second, it unearths the main advantages and barriers of reverse logistics in construction while providing some suggestions to harness the advantages and mitigate these barriers. Finally, it provides a future research direction based on the review. © The Author(s) 2015.

Optimization of automation: III. Development of optimization method for determining automation rate in nuclear power plants

International Nuclear Information System (INIS)

Lee, Seung Min; Kim, Jong Hyun; Kim, Man Cheol; Seong, Poong Hyun

2016-01-01

Highlights: • We propose an appropriate automation rate that enables the best human performance. • We analyze the shortest working time considering Situation Awareness Recovery (SAR). • The optimized automation rate is estimated by integrating the automation and ostracism rate estimation methods. • The process to derive the optimized automation rate is demonstrated through case studies. - Abstract: Automation has been introduced in various industries, including the nuclear field, because it is commonly believed that automation promises greater efficiency, lower workloads, and fewer operator errors through reducing operator errors and enhancing operator and system performance. However, the excessive introduction of automation has deteriorated operator performance due to the side effects of automation, which are referred to as Out-of-the-Loop (OOTL), and this is critical issue that must be resolved. Thus, in order to determine the optimal level of automation introduction that assures the best human operator performance, a quantitative method of optimizing the automation is proposed in this paper. In order to propose the optimization method for determining appropriate automation levels that enable the best human performance, the automation rate and ostracism rate, which are estimation methods that quantitatively analyze the positive and negative effects of automation, respectively, are integrated. The integration was conducted in order to derive the shortest working time through considering the concept of situation awareness recovery (SAR), which states that the automation rate with the shortest working time assures the best human performance. The process to derive the optimized automation rate is demonstrated through an emergency operation scenario-based case study. In this case study, four types of procedures are assumed through redesigning the original emergency operating procedure according to the introduced automation and ostracism levels. Using the

5th International Conference on Dynamics in Logistics

CERN Document Server

Kotzab, Herbert; Pannek, Jürgen

2017-01-01

These proceedings contain research papers presented at the 5th International Conference on Dynamics in Logistics, held in Bremen, Germany, February 2016. The conference is concerned with dynamic aspects of logistic processes and networks. The spectrum of topics reaches from modeling, planning and control of processes over supply chain management and maritime logistics to innovative technologies and robotic applications for cyber-physical production and logistic systems. The growing dynamic confronts the area of logistics with completely new challenges: it must become possible to describe, identify and analyze the process changes. Moreover, logistic processes and networks must be redevised to be rapidly and flexibly adaptable to continuously changing conditions. The book primarily addresses researchers and practitioners from the field of industrial engineering and logistics, but it may also be beneficial for graduate students.

Satellite rainfall retrieval by logistic regression

Science.gov (United States)

Chiu, Long S.

1986-01-01

The potential use of logistic regression in rainfall estimation from satellite measurements is investigated. Satellite measurements provide covariate information in terms of radiances from different remote sensors.The logistic regression technique can effectively accommodate many covariates and test their significance in the estimation. The outcome from the logistical model is the probability that the rainrate of a satellite pixel is above a certain threshold. By varying the thresholds, a rainrate histogram can be obtained, from which the mean and the variant can be estimated. A logistical model is developed and applied to rainfall data collected during GATE, using as covariates the fractional rain area and a radiance measurement which is deduced from a microwave temperature-rainrate relation. It is demonstrated that the fractional rain area is an important covariate in the model, consistent with the use of the so-called Area Time Integral in estimating total rain volume in other studies. To calibrate the logistical model, simulated rain fields generated by rainfield models with prescribed parameters are needed. A stringent test of the logistical model is its ability to recover the prescribed parameters of simulated rain fields. A rain field simulation model which preserves the fractional rain area and lognormality of rainrates as found in GATE is developed. A stochastic regression model of branching and immigration whose solutions are lognormally distributed in some asymptotic limits has also been developed.

Analysis of Jingdong Mall Logistics Distribution Model

Science.gov (United States)

Shao, Kang; Cheng, Feng

In recent years, the development of electronic commerce in our country to speed up the pace. The role of logistics has been highlighted, more and more electronic commerce enterprise are beginning to realize the importance of logistics in the success or failure of the enterprise. In this paper, the author take Jingdong Mall for example, performing a SWOT analysis of their current situation of self-built logistics system, find out the problems existing in the current Jingdong Mall logistics distribution and give appropriate recommendations.

Research on logistics scheduling based on PSO

Science.gov (United States)

Bao, Huifang; Zhou, Linli; Liu, Lei

2017-08-01

With the rapid development of e-commerce based on the network, the logistics distribution support of e-commerce is becoming more and more obvious. The optimization of vehicle distribution routing can improve the economic benefit and realize the scientific of logistics [1]. Therefore, the study of logistics distribution vehicle routing optimization problem is not only of great theoretical significance, but also of considerable value of value. Particle swarm optimization algorithm is a kind of evolutionary algorithm, which is based on the random solution and the optimal solution by iteration, and the quality of the solution is evaluated through fitness. In order to obtain a more ideal logistics scheduling scheme, this paper proposes a logistics model based on particle swarm optimization algorithm.

Logistics performance measurement system for the automotive industry

OpenAIRE

Dörnhöfer, Martin;Schröder, Falk;Günthner, Willibald A.

2017-01-01

Logistics can be seen as a key competitive factor in the automotive industry due to the rising number of model variants and options. With the increasing importance of logistics (Gunasekaran et al. in Int J Prod Econ 87(3):333-347, 2004), the evaluation of logistics effectiveness and efficiency is gaining increased attention. Logistics performance management (PM) is the key to quantifying the current state and improvement potentials within logistics. To account for the increasing importance of...

The Effect of Logistic Controlling on Business Processes

OpenAIRE

Szilvia, Berek Méhesné

2014-01-01

The increase in the significance of logistics can be attributed to two major reasons: the increasing cost sensitivity of companies and the necessity for the higher fulfilment of customer needs. Logistic controlling is a tool of management used to coordinate logistic activities and to reach logistic managerial decisions by providing information through the analysis of the system. The up-to-date and precise information that can be gained from the logistic controlling system helps the management...

Neo-logistic model for the growth of bacteria

OpenAIRE

Tashiro, Tohru; Yoshimura, Fujiko

2017-01-01

We propose a neo-logistic model that can describe bacterial growth data precisely. This model is not derived by modifying the logistic model formally, but by incorporating the synthesis of inducible enzymes into the logistic model indirectly. Therefore, the meaning of the parameters of the neo-logistic model becomes physically clear. The neo-logistic model can approximate bacterial growth better than models previously presented, and predict the order of the saturated number of bacteria in the...

A sustainable urban logistics dashboard from the perspective of a group of logistics managers

OpenAIRE

Morana , Joëlle; Gonzalez-Feliu , Jesus

2014-01-01

Urban logistics has now become a priority issue in both supply chain management and urban planning. However, the different stakeholders involved develop different approaches whose aims and objectives do not always coincide and sometimes present conflicting standpoints. The aim of this paper is to complete existing literature by proposing a sustainable dashboard for evaluating the sustainable performance of urban delivery systems, from the perspective of operational logistics managers, one of ...

Strategies on the Implementation of China's Logistics Information Network

Science.gov (United States)

Dong, Yahui; Li, Wei; Guo, Xuwen

The economic globalization and trend of e-commerce network have determined that the logistics industry will be rapidly developed in the 21st century. In order to achieve the optimal allocation of resources, a worldwide rapid and sound customer service system should be established. The establishment of a corresponding modern logistics system is the inevitable choice of this requirement. It is also the inevitable choice for the development of modern logistics industry in China. The perfect combination of modern logistics and information network can better promote the development of the logistics industry. Through the analysis of Status of Logistics Industry in China, this paper summed up the domestic logistics enterprise logistics information system in the building of some common problems. According to logistics information systems planning methods and principles set out logistics information system to optimize the management model.

World-wide distribution automation systems

International Nuclear Information System (INIS)

Devaney, T.M.

1994-01-01

A worldwide power distribution automation system is outlined. Distribution automation is defined and the status of utility automation is discussed. Other topics discussed include a distribution management system, substation feeder, and customer functions, potential benefits, automation costs, planning and engineering considerations, automation trends, databases, system operation, computer modeling of system, and distribution management systems

WIDAFELS flexible automation systems

International Nuclear Information System (INIS)

Shende, P.S.; Chander, K.P.; Ramadas, P.

1990-01-01

After discussing the various aspects of automation, some typical examples of various levels of automation are given. One of the examples is of automated production line for ceramic fuel pellets. (M.G.B.)

Logistic Vehicle System Replacement Cost Estimate

National Research Council Canada - National Science Library

Stinson, Margaret

1998-01-01

The Logistics Vehicle System (LVS) was originally fielded from 1985-1989. Most of the LVS fleet will reach end-of-service life in 2005, therefore the goal of the Logistics Vehicle System Replacement (LVSR...

Multicriteria Optimisation in Logistics Forwarder Activities

Directory of Open Access Journals (Sweden)

Tanja Poletan Jugović

2007-05-01

Full Text Available Logistics forwarder, as organizer and planner of coordinationand integration of all the transport and logistics chains elements,uses adequate ways and methods in the process of planningand decision-making. One of these methods, analysed inthis paper, which could be used in optimisation of transportand logistics processes and activities of logistics forwarder, isthe multicriteria optimisation method. Using that method, inthis paper is suggested model of multicriteria optimisation of logisticsforwarder activities. The suggested model of optimisationis justified in keeping with method principles of multicriteriaoptimization, which is included in operation researchmethods and it represents the process of multicriteria optimizationof variants. Among many different processes of multicriteriaoptimization, PROMETHEE (Preference Ranking OrganizationMethod for Enrichment Evaluations and Promcalc& Gaia V. 3.2., computer program of multicriteria programming,which is based on the mentioned process, were used.

Automation in Clinical Microbiology

Science.gov (United States)

Ledeboer, Nathan A.

2013-01-01

Historically, the trend toward automation in clinical pathology laboratories has largely bypassed the clinical microbiology laboratory. In this article, we review the historical impediments to automation in the microbiology laboratory and offer insight into the reasons why we believe that we are on the cusp of a dramatic change that will sweep a wave of automation into clinical microbiology laboratories. We review the currently available specimen-processing instruments as well as the total laboratory automation solutions. Lastly, we outline the types of studies that will need to be performed to fully assess the benefits of automation in microbiology laboratories. PMID:23515547

Virtual automation.

Science.gov (United States)

Casis, E; Garrido, A; Uranga, B; Vives, A; Zufiaurre, C

2001-01-01

Total laboratory automation (TLA) can be substituted in mid-size laboratories by a computer sample workflow control (virtual automation). Such a solution has been implemented in our laboratory using PSM, software developed in cooperation with Roche Diagnostics (Barcelona, Spain), to this purpose. This software is connected to the online analyzers and to the laboratory information system and is able to control and direct the samples working as an intermediate station. The only difference with TLA is the replacement of transport belts by personnel of the laboratory. The implementation of this virtual automation system has allowed us the achievement of the main advantages of TLA: workload increase (64%) with reduction in the cost per test (43%), significant reduction in the number of biochemistry primary tubes (from 8 to 2), less aliquoting (from 600 to 100 samples/day), automation of functional testing, drastic reduction of preanalytical errors (from 11.7 to 0.4% of the tubes) and better total response time for both inpatients (from up to 48 hours to up to 4 hours) and outpatients (from up to 10 days to up to 48 hours). As an additional advantage, virtual automation could be implemented without hardware investment and significant headcount reduction (15% in our lab).

Regional Logistics Information Resources Integration Patterns and Countermeasures

Science.gov (United States)

Wu, Hui; Shangguan, Xu-ming

Effective integration of regional logistics information resources can provide collaborative services in information flow, business flow and logistics for regional logistics enterprises, which also can reduce operating costs and improve market responsiveness. First, this paper analyzes the realistic significance on the integration of regional logistics information. Second, this paper brings forward three feasible patterns on the integration of regional logistics information resources, These three models have their own strengths and the scope of application and implementation, which model is selected will depend on the specific business and the regional distribution of enterprises. Last, this paper discusses the related countermeasures on the integration of regional logistics information resources, because the integration of regional logistics information is a systems engineering, when the integration is advancing, the countermeasures should pay close attention to the current needs and long-term development of regional enterprises.

Multi-donor trust fund for sustainable logistics (MDTF-SL) : position note on green logistics (supply chains)

NARCIS (Netherlands)

Fransoo, J.C.

2014-01-01

Logistics – the services, knowledge, and infrastructure that allow for the free movement of goods and people – is now recognized as a key driver of competitiveness and economic development. Efficient logistics systems are a precondition for regions, countries, cities, and businesses to participate

Automation of Test Cases for Web Applications : Automation of CRM Test Cases

OpenAIRE

Seyoum, Alazar

2012-01-01

The main theme of this project was to design a test automation framework for automating web related test cases. Automating test cases designed for testing a web interface provide a means of improving a software development process by shortening the testing phase in the software development life cycle. In this project an existing AutoTester framework and iMacros test automation tools were used. CRM Test Agent was developed to integrate AutoTester to iMacros and to enable the AutoTester,...

ISS Logistics Hardware Disposition and Metrics Validation

Science.gov (United States)

Rogers, Toneka R.

2010-01-01

I was assigned to the Logistics Division of the International Space Station (ISS)/Spacecraft Processing Directorate. The Division consists of eight NASA engineers and specialists that oversee the logistics portion of the Checkout, Assembly, and Payload Processing Services (CAPPS) contract. Boeing, their sub-contractors and the Boeing Prime contract out of Johnson Space Center, provide the Integrated Logistics Support for the ISS activities at Kennedy Space Center. Essentially they ensure that spares are available to support flight hardware processing and the associated ground support equipment (GSE). Boeing maintains a Depot for electrical, mechanical and structural modifications and/or repair capability as required. My assigned task was to learn project management techniques utilized by NASA and its' contractors to provide an efficient and effective logistics support infrastructure to the ISS program. Within the Space Station Processing Facility (SSPF) I was exposed to Logistics support components, such as, the NASA Spacecraft Services Depot (NSSD) capabilities, Mission Processing tools, techniques and Warehouse support issues, required for integrating Space Station elements at the Kennedy Space Center. I also supported the identification of near-term ISS Hardware and Ground Support Equipment (GSE) candidates for excessing/disposition prior to October 2010; and the validation of several Logistics Metrics used by the contractor to measure logistics support effectiveness.

Determination of {sup 236}U and transuranium elements in depleted uranium ammunition by {alpha}-spectrometry and ICP-MS

Energy Technology Data Exchange (ETDEWEB)

Desideri, D.; Meli, M.A.; Roselli, C.; Testa, C. [General Chemistry Institute, Urbino University, Urbino (Italy); Boulyga, S.F.; Becker, J.S. [Central Department of Analytical Chemistry, Research Centre Juelich, Juelich (Germany)

2002-11-01

It is well known that ammunition containing depleted uranium (DU) was used by NATO during the Balkan conflict. To evaluate the origin of DU (the enrichment of natural uranium or the reprocessing of spent nuclear fuel) it is necessary to directly detect the presence of activation products ({sup 236}U, {sup 239}Pu, {sup 240}Pu, {sup 241}Am, and {sup 237}Np) in the ammunition. In this work the analysis of actinides by {alpha}-spectrometry was compared with that by inductively coupled plasma mass spectrometry (ICP-MS) after selective separation of ultratraces of transuranium elements from the uranium matrix. {sup 242}Pu and {sup 243}Am were added to calculate the chemical yield. Plutonium was separated from uranium by extraction chromatography, using tri-n-octylamine (TNOA), with a decontamination factor higher than 10{sup 6}; after elution plutonium was determined by ICP-MS ({sup 239}Pu and {sup 240}Pu) and {alpha}-spectrometry ({sup 239+240}Pu) after electroplating. The concentration of Pu in two DU penetrator samples was 7 x 10{sup -12} g g{sup -1} and 2 x 10{sup -11} g g{sup -1}. The {sup 240}Pu/{sup 239}Pu isotope ratio in one penetrator sample (0.12{+-}0.04) was significantly lower than the {sup 240}Pu/{sup 239}Pu ratios found in two soil samples from Kosovo (0.35{+-}0.10 and 0.27{+-}0.07). {sup 241}Am was separated by extraction chromatography, using di(2-ethylhexyl)phosphoric acid (HDEHP), with a decontamination factor as high as 10{sup 7}. The concentration of {sup 241}Am in the penetrator samples was 2.7 x 10{sup -14} g g{sup -1} and <9.4 x 10{sup -15} g g{sup -1}. In addition {sup 237}Np was detected at ultratrace levels. In general, ICP-MS and {alpha}-spectrometry results were in good agreement.The presence of anthropogenic radionuclides ({sup 236}U, {sup 239}Pu,{sup 240}Pu, {sup 241}Am, and {sup 237}Np) in the penetrators indicates that at least part of the uranium originated from the reprocessing of nuclear fuel. Because the concentrations of

Focused Logistics: Time for Functional Command

National Research Council Canada - National Science Library

Mintzlaff, Jeffrey G

2005-01-01

.... Unfortunately, logistical support is often taken for granted. As a result, the U.S. Military's logistical system has become sluggish, often unreliable, and expensive, in part due to its fragmented and inefficient organizational structure. The U.S...

Logistic regression for dichotomized counts.

Science.gov (United States)

Preisser, John S; Das, Kalyan; Benecha, Habtamu; Stamm, John W

2016-12-01

Sometimes there is interest in a dichotomized outcome indicating whether a count variable is positive or zero. Under this scenario, the application of ordinary logistic regression may result in efficiency loss, which is quantifiable under an assumed model for the counts. In such situations, a shared-parameter hurdle model is investigated for more efficient estimation of regression parameters relating to overall effects of covariates on the dichotomous outcome, while handling count data with many zeroes. One model part provides a logistic regression containing marginal log odds ratio effects of primary interest, while an ancillary model part describes the mean count of a Poisson or negative binomial process in terms of nuisance regression parameters. Asymptotic efficiency of the logistic model parameter estimators of the two-part models is evaluated with respect to ordinary logistic regression. Simulations are used to assess the properties of the models with respect to power and Type I error, the latter investigated under both misspecified and correctly specified models. The methods are applied to data from a randomized clinical trial of three toothpaste formulations to prevent incident dental caries in a large population of Scottish schoolchildren. © The Author(s) 2014.

Co-location synergies : specialized versus diverse logistics concentration areas

OpenAIRE

Heuvel, van den, F.P.; Langen, de, P.W.; Donselaar, van, K.H.; Fransoo, J.C.

2012-01-01

Purpose: The purpose of this paper is to contribute to the understanding of spatial concentration of logistics firms by empirically analyzing synergies through co-location and investigating whether co-location of logistics establishments in specialized logistics concentration areas results in benefits compared to co-location in diverse logistics concentration areas. Methodology: A survey among managers of 128 logistics establishments located in logistics concentration areas was used to test f...

Production Logistics Simulation Supported by Process Description Languages

Directory of Open Access Journals (Sweden)

Bohács Gábor

2016-03-01

Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

An Automation Planning Primer.

Science.gov (United States)

Paynter, Marion

1988-01-01

This brief planning guide for library automation incorporates needs assessment and evaluation of options to meet those needs. A bibliography of materials on automation planning and software reviews, library software directories, and library automation journals is included. (CLB)

DECISION-MAKING STRATEGIES REGARDING LOGISTICS ORGANIZATION

Directory of Open Access Journals (Sweden)

Ioana Olariu

2014-07-01

Full Text Available In the face of higher costs of operation and increasing pressures from customers for better service, the logistics organization must adapt to meet the challenge. An understanding of the factors that make organizations effective, and a knowledge of how these factors interrelate, are the first steps towards developing the system for a firm’s customers. Logistics organizations must of necessity become more cost and service efficient. An understanding of the factors that affect a firm’s organizational effectiveness, along with strategies to reveal weaknesses or deficiencies, can help create more efficient logistics systems. Organizational changes form the basis for procedural modifications that can reduce costs or improve service. Many firms have shown significant improvements in their logistics cost-service mix as a result of organizational changes. Logistics organizations are generally structured along the following lines: strategic versus operational, centralized versus decentralized and line versus staff, in various combinations. There is no single ideal organizational structure, but there are important elements that comprise an effective organization. In general, the factors contributing to organizational effectiveness can be categorized as organizational characteristics, environmental characteristics, employee characteristics, and managerial policies and practices.

Automation in Immunohematology

Directory of Open Access Journals (Sweden)

Meenu Bajpai

2012-01-01

Full Text Available There have been rapid technological advances in blood banking in South Asian region over the past decade with an increasing emphasis on quality and safety of blood products. The conventional test tube technique has given way to newer techniques such as column agglutination technique, solid phase red cell adherence assay, and erythrocyte-magnetized technique. These new technologies are adaptable to automation and major manufacturers in this field have come up with semi and fully automated equipments for immunohematology tests in the blood bank. Automation improves the objectivity and reproducibility of tests. It reduces human errors in patient identification and transcription errors. Documentation and traceability of tests, reagents and processes and archiving of results is another major advantage of automation. Shifting from manual methods to automation is a major undertaking for any transfusion service to provide quality patient care with lesser turnaround time for their ever increasing workload. This article discusses the various issues involved in the process.

Analysis of Unmanned Systems in Military Logistics

Science.gov (United States)

2016-12-01

performance measures: customer satisfaction , flexibility, visibility, and trust. If we apply this explanation of Li and Schulze (2011) to the military...unmanned systems, initially, we aimed to define current and proposed unmanned applications in civilian-sector logistics and current military...aimed to define current and proposed unmanned applications in civilian-sector logistics and current military logistics challenges. Then, justifying

The Role of Reverse Logistics on the European Market

OpenAIRE

Irina Tobosaru; Irina Nicolau

2009-01-01

The Council of Logistics Management has published the first definition of reverse logistics in 1992: “The term reverse logistics refers to the role of logistics in recycling waste, in the distribution and the handling of dangerous materials. A broader definition includes in the reverse logistics, activities that have the purpose of reducing the resources, of recycling, replacing, reusing the materials and relocating them”. Reverse logistics can be also defined using as standard the definition...

LOGISTICS MANAGEMENT IN THE GENERAL STRUCTURE OF COMPANY MANAGEMENT

OpenAIRE

SERGIU PETROVICI; ALA GUDIMA

2011-01-01

The paper is dedicated to the place of logistics management in the general structure of an enterprise. It states some rules to improve the logistic system through development of logistic management as integral system and through a complex approach, development of a market-orientated logistic management with clear short-term and long-term purposes, development of information system in logistics. The course of Logistics Management is taught at the Cooperative-Commercial University of Moldova at...

LOGISTICS AS A PART OF INNOVATION PROCESS

Directory of Open Access Journals (Sweden)

Erika Loučanová

2016-03-01

Full Text Available The paper deals with the importance of logistics in innovation process. The issue is focused on management of different logistic processes building on the innovation and on innovation process. However, logistics is an essential part of this process. The results describe logistics chain within innovation process for the satisfaction of customers´ demand and fulfilment of customers’ requests on the innovation. This approach involves “7S of logistics” which means: “create proper innovation, in the proper quality, for the right place and in the right time, as well as, with the proper price and package”.

Generation of fractals from complex logistic map

International Nuclear Information System (INIS)

Rani, Mamta; Agarwal, Rashi

2009-01-01

Remarkably benign looking logistic transformations x n+1 = r x n (1 - x n ) for choosing x 0 between 0 and 1 and 0 < r ≤ 4 have found a celebrated place in chaos, fractals and discrete dynamics. The strong physical meaning of Mandelbrot and Julia sets is broadly accepted and nicely connected by Christian Beck [Beck C. Physical meaning for Mandelbrot and Julia sets. Physica D 1999;125(3-4):171-182. Zbl0988.37060] to the complex logistic maps, in the former case, and to the inverse complex logistic map, in the latter case. The purpose of this paper is to study the bounded behavior of the complex logistic map using superior iterates and generate fractals from the same. The analysis in this paper shows that many beautiful properties of the logistic map are extendable for a larger value of r.

Automated Budget System -

Data.gov (United States)

Department of Transportation — The Automated Budget System (ABS) automates management and planning of the Mike Monroney Aeronautical Center (MMAC) budget by providing enhanced capability to plan,...

Logistics of LEP installation

International Nuclear Information System (INIS)

Genier, C.; Capper, S.

1988-01-01

The size of the LEP project, coupled with the tight construction schedules, calls for organized planning, logistics, monitoring and control. This is being carried out at present using tools such as ORACLE the Relational Database Management System, running on a VAX cluster for data storage and transfer, micro-computers for on-site follow-up, and PC's running Professional ORACLE, DOS and XENIX linked to a communications network to receive data feedback concerning transport and handling means. Following over 2 years of installations, this paper presents the methods used for the logistics of installation and their results

Logistics Reduction and Repurposing Beyond Low Earth Orbit

Science.gov (United States)

Ewert, Michael K.; Broyan, James L., Jr.

2012-01-01

All human space missions, regardless of destination, require significant logistical mass and volume that is strongly proportional to mission duration. Anything that can be done to reduce initial mass and volume of supplies or reuse items that have been launched will be very valuable. Often, the logistical items require disposal and represent a trash burden. Logistics contributions to total mission architecture mass can be minimized by considering potential reuse using systems engineering analysis. In NASA's Advanced Exploration Systems "Logistics Reduction and Repurposing Project," various tasks will reduce the intrinsic mass of logistical packaging, enable reuse and repurposing of logistical packaging and carriers for other habitation, life support, crew health, and propulsion functions, and reduce or eliminate the nuisance aspects of trash at the same time. Repurposing reduces the trash burden and eliminates the need for hardware whose function can be provided by use of spent logistical items. However, these reuse functions need to be identified and built into future logical systems to enable them to effectively have a secondary function. These technologies and innovations will help future logistics systems to support multiple exploration missions much more efficiently.

Roadmap towards a smart logistics ecosystem

NARCIS (Netherlands)

Hofman, W.J.; Bastiaansen, H.J.M.

2014-01-01

Currently, the fundamentals of a technical infrastructure for a logistics ‘systems-of-systems’ are laid, facilitating improved, more effective and efficient logistics services based on higher levels of self-organization. Through situation awareness with enhanced methods for sharing (real-time) data,

Production-logistic system in the aspect of strategies for production planning and control and for logistic customer service

OpenAIRE

Łukasz Hadaś; Agnieszka Stachowiak; Piotr Cyplik

2014-01-01

Background: The authors made multi-dimensional review of production and logistic strategies in order to prove their coherence in shaping internal and external supply chain. The paper is concluded with definition of production-logistic system as an object of modeling in transformation of business systems of manufacturing companies. Material and methods: The paper is based on analysis of state of the art presented in the literature on the subject of production and logistics strategies. Publ...

The system for statistical analysis of logistic information

Directory of Open Access Journals (Sweden)

Khayrullin Rustam Zinnatullovich

2015-05-01

Full Text Available The current problem for managers in logistic and trading companies is the task of improving the operational business performance and developing the logistics support of sales. The development of logistics sales supposes development and implementation of a set of works for the development of the existing warehouse facilities, including both a detailed description of the work performed, and the timing of their implementation. Logistics engineering of warehouse complex includes such tasks as: determining the number and the types of technological zones, calculation of the required number of loading-unloading places, development of storage structures, development and pre-sales preparation zones, development of specifications of storage types, selection of loading-unloading equipment, detailed planning of warehouse logistics system, creation of architectural-planning decisions, selection of information-processing equipment, etc. The currently used ERP and WMS systems did not allow us to solve the full list of logistics engineering problems. In this regard, the development of specialized software products, taking into account the specifics of warehouse logistics, and subsequent integration of these software with ERP and WMS systems seems to be a current task. In this paper we suggest a system of statistical analysis of logistics information, designed to meet the challenges of logistics engineering and planning. The system is based on the methods of statistical data processing.The proposed specialized software is designed to improve the efficiency of the operating business and the development of logistics support of sales. The system is based on the methods of statistical data processing, the methods of assessment and prediction of logistics performance, the methods for the determination and calculation of the data required for registration, storage and processing of metal products, as well as the methods for planning the reconstruction and development

Effect of folic acid on appetite in children: ordinal logistic and fuzzy logistic regressions.

Science.gov (United States)

Namdari, Mahshid; Abadi, Alireza; Taheri, S Mahmoud; Rezaei, Mansour; Kalantari, Naser; Omidvar, Nasrin

2014-03-01

Reduced appetite and low food intake are often a concern in preschool children, since it can lead to malnutrition, a leading cause of impaired growth and mortality in childhood. It is occasionally considered that folic acid has a positive effect on appetite enhancement and consequently growth in children. The aim of this study was to assess the effect of folic acid on the appetite of preschool children 3 to 6 y old. The study sample included 127 children ages 3 to 6 who were randomly selected from 20 preschools in the city of Tehran in 2011. Since appetite was measured by linguistic terms, a fuzzy logistic regression was applied for modeling. The obtained results were compared with a statistical ordinal logistic model. After controlling for the potential confounders, in a statistical ordinal logistic model, serum folate showed a significantly positive effect on appetite. A small but positive effect of folate was detected by fuzzy logistic regression. Based on fuzzy regression, the risk for poor appetite in preschool children was related to the employment status of their mothers. In this study, a positive association was detected between the levels of serum folate and improved appetite. For further investigation, a randomized controlled, double-blind clinical trial could be helpful to address causality. Copyright © 2014 Elsevier Inc. All rights reserved.

The influence of logistics potentials on business management

Directory of Open Access Journals (Sweden)

Rafał Matwiejczuk

2012-09-01

Full Text Available Background: Logistics is more and more often perceived as an integrated potential of changes in a business management system. Among the particular potentials, the key importance is assigned to logistics resources, capabilities, and particularly competences. Methods: The article points at exploitation of possibilities of logistics potentials in achieving desired changes in business management and reaching desired market and economic effects by a company. Except for literature studies, empirical research has been conducted in 111 companies operating in Poland.  Results and conclusions:  Research results have shown several symptoms of logistics influence on business management system. The significance of logistics potentials in business management system capacity development has been partially confirmed. Due to logistics potentials, the company can be more effective and efficient in reaching expected market and economic outcomes.  

Generation of fractals from complex logistic map

Energy Technology Data Exchange (ETDEWEB)

Rani, Mamta [Galgotias College of Engg. and Technology, Greater Noida (India)], E-mail: mamtarsingh@rediffmail.com; Agarwal, Rashi [IEC College of Engg. and Tech., Greater Noida (India)], E-mail: agarwal_rashi@yahoo.com

2009-10-15

Remarkably benign looking logistic transformations x{sub n+1} = r x{sub n}(1 - x{sub n}) for choosing x{sub 0} between 0 and 1 and 0 < r {<=} 4 have found a celebrated place in chaos, fractals and discrete dynamics. The strong physical meaning of Mandelbrot and Julia sets is broadly accepted and nicely connected by Christian Beck [Beck C. Physical meaning for Mandelbrot and Julia sets. Physica D 1999;125(3-4):171-182. Zbl0988.37060] to the complex logistic maps, in the former case, and to the inverse complex logistic map, in the latter case. The purpose of this paper is to study the bounded behavior of the complex logistic map using superior iterates and generate fractals from the same. The analysis in this paper shows that many beautiful properties of the logistic map are extendable for a larger value of r.

Technological Innovation for China’s Logistics Industry

Directory of Open Access Journals (Sweden)

Chieh-Yu Lin

2008-01-01

Full Text Available China’s logistics industry has started to pay attention to adopt more efficient logistics technologies to provide better services for their customers. This paper employes the questionnaire survey to study the factors influencing the adoption of technological innovations by logistics service providers in China as well as the influences of technological innovation on supply chain performance. Technological innovations are categorized into data acquisition technologies, information technologies, warehousing technologies, and transportation technologies. The results show that the adoption of technological innovations is significantly influenced by technological, organizational and environmental factors, and adopting innovative technologies will increase supply chain performance for the logistics industry in China.

Consumer Perception on Halal meat logistics

NARCIS (Netherlands)

Tieman, H.; Ghazali, M.C.; Vorst, van der J.G.A.J.

2013-01-01

Purpose – The purpose of this paper is to investigate the preferred minimum level of segregation for halal meat in supermarket, transport, storage and terminals; the responsibility of halal logistics; and the willingness to pay for halal logistics in a Muslim and non-Muslim country.

Smart logistics: an enterprise architecture perspective

NARCIS (Netherlands)

van Sinderen, Marten J.; Singh, Prince Mayurank; Wieringa, Roel J.

Logistic enterprises are increasingly becoming smarter and more ecient by using real-time contextual data. A currently unsolved problem for small to medium sized logistic service providers (SMLSPs) is, how to use real time data in existing business processes & IT systems. Enterprise architecture can

Methodical approach to financial stimulation of logistics managers

OpenAIRE

Melnykova Kateryna V.

2014-01-01

The article offers a methodical approach to financial stimulation of logistics managers, which allows calculation of the incentive amount with consideration of profit obtained from introduction of optimisation logistics solutions. The author generalises measures, which would allow increase of stimulation of labour of logistics managers by the enterprise top managers. The article marks out motivation factors, which exert influence upon relation of logistics managers to execution of optimisatio...

Managing logistical processes in franchise retail trade networks

OpenAIRE

Grigorenko Tatyana N.; Kochubey Dmitriy V.

2013-01-01

The article analyses approaches to organisation of internal logistics of franchise trade networks and methodical provision of assessment of results of logistical activity at companies of franchise networks. The article justifies urgency of application of referent models of management of supply chains in construction of a system of management of logistical activity of franchise networks. It offers classification of models of management of internal logistics of franchise retail trade networks. ...

Analysis of base fuze functioning of HESH ammunitions through high-speed photographic technique

Science.gov (United States)

Biswal, T. K.

2007-01-01

High-speed photography plays a major role in a Test Range where the direct access is possible through imaging in order to understand a dynamic process thoroughly and both qualitative and quantitative data are obtained thereafter through image processing and analysis. In one of the trials it was difficult to understand the performance of HESH ammunitions on rolled homogeneous armour. There was no consistency in scab formation even though all other parameters like propellant charge mass, charge temperature, impact velocity etc are maintained constant. To understand the event thoroughly high-speed photography was deployed to have a frontal view of the total process. Clear information of shell impact, embedding of HE propellant on armour and base fuze initiation are obtained. In case of scab forming rounds these three processes are clearly observed in sequence. However in non-scab ones base fuze is initiated before the completion of the embedding process resulting non-availability of threshold thrust on to the armour to cause scab. This has been revealed in two rounds where there was a failure of scab formation. As a quantitative measure, fuze delay was calculated for each round and there after premature functioning of base fuze was ascertained in case of non-scab rounds. Such potency of high-speed photography has been depicted in details in this paper.

PREDICTION OF MALIGNANT BREAST LESIONS FROM MRI FEATURES: A COMPARISON OF ARTIFICIAL NEURAL NETWORK AND LOGISTIC REGRESSION TECHNIQUES

Science.gov (United States)

McLaren, Christine E.; Chen, Wen-Pin; Nie, Ke; Su, Min-Ying

2009-01-01

Rationale and Objectives Dynamic contrast enhanced MRI (DCE-MRI) is a clinical imaging modality for detection and diagnosis of breast lesions. Analytical methods were compared for diagnostic feature selection and performance of lesion classification to differentiate between malignant and benign lesions in patients. Materials and Methods The study included 43 malignant and 28 benign histologically-proven lesions. Eight morphological parameters, ten gray level co-occurrence matrices (GLCM) texture features, and fourteen Laws’ texture features were obtained using automated lesion segmentation and quantitative feature extraction. Artificial neural network (ANN) and logistic regression analysis were compared for selection of the best predictors of malignant lesions among the normalized features. Results Using ANN, the final four selected features were compactness, energy, homogeneity, and Law_LS, with area under the receiver operating characteristic curve (AUC) = 0.82, and accuracy = 0.76. The diagnostic performance of these 4-features computed on the basis of logistic regression yielded AUC = 0.80 (95% CI, 0.688 to 0.905), similar to that of ANN. The analysis also shows that the odds of a malignant lesion decreased by 48% (95% CI, 25% to 92%) for every increase of 1 SD in the Law_LS feature, adjusted for differences in compactness, energy, and homogeneity. Using logistic regression with z-score transformation, a model comprised of compactness, NRL entropy, and gray level sum average was selected, and it had the highest overall accuracy of 0.75 among all models, with AUC = 0.77 (95% CI, 0.660 to 0.880). When logistic modeling of transformations using the Box-Cox method was performed, the most parsimonious model with predictors, compactness and Law_LS, had an AUC of 0.79 (95% CI, 0.672 to 0.898). Conclusion The diagnostic performance of models selected by ANN and logistic regression was similar. The analytic methods were found to be roughly equivalent in terms of

CONCEPTUAL ISSUES REGARDING REVERSE LOGISTICS

Directory of Open Access Journals (Sweden)

Ioana Olariu

2013-12-01

Full Text Available As the power of consumers is growing, the product return for customer service and customer retention has become a common practice in the competitive market, which propels the recent practice of reverse logistics in companies. Many firms attracted by the value available in the flow, have proactively participated in handling returned products at the end of their usefulness or from other parts of the product life cycle. Reverse logistics is the flow and management of products, packaging, components and information from the point of consumption to the point of origin. It is a collection of practices similar to those of supply chain management, but in the opposite direction, from downstream to upstream. It involves activities such as reuse, repair, remanufacture, refurbish, reclaim and recycle. For the conventional forward logistics systems, the flow starts upstream as raw materials, later as manufactured parts and components to be assembled and continues downstream to reach customers as final products to be disposed once they reach their economic or useful lives. In reverse logistics, the disposed products are pushed upstream to be repaired, remanufactured, refurbished, and disassembled into components to be reused or as raw material to be recycled for later use.

Logistics innovation development

DEFF Research Database (Denmark)

Pedrosa, Alex; Blazevic, Vera; Jasmand, Claudia

2015-01-01

Purpose – The purpose of this paper is to investigate the microfoundations of customer knowledge acquisition during logistics innovation development. Specifically, the authors explore the activities and behaviors of employees with customer contact (i.e. boundary-spanning employees (BSEs)) to deepen...

Logistics Takes Command

NARCIS (Netherlands)

Marullo, F.

2015-01-01

The term "logistics" derives from the Greek logizomai standing for the art of reckoning, organising, planning. Through time it achieved a strict military connotation, dealing with the composition, lodging and movements of troops, the arrangement of provisions in hostile territories, the

Logistic innovations in transport

Directory of Open Access Journals (Sweden)

Mirosław Antonowicz

2014-03-01

Full Text Available Introduction: The article discusses the issue of logistic innovations in transport. The essentials of logistic innovations in transport together with some examples of specific innovations are presented. The role of the client's needs in transport innovations is indicated. The most vital postulates affecting the innovativeness of shipping companies and derived from the author's experience as well as scholarly publications, are time, safety, reliability as well as comprehensiveness of service offer. Following the analysis of the issue, and on the grounds of Kaizen's and Lean's method, the concept of continuous innovations is suggested as very useful for the development of transport. The potential of clusters as the source of logistic innovations in transport is emphasised. Methods: The discussion of the issue was preceded by the author's analysis of written sources on innovativeness, the evaluation of ratings of innovativeness as well as the analysis of rewarded innovative solutions in transport subsequent to the businesses participation in the programme of innovative solutions in transport. The role of innovation practical business operations is argued following the analysis of some strategic documents such as: 2011 White Paper and the Strategy for the Development of Transport by 2020 adopted by the Polish government in 2013. Aim: The aim of the article is to present the role and significance of the issue of logistic innovations in transport and to cite instances of practical solutions implemented by shipping companies, the solutions which resulted in measurable effects. Following the author's observation of the instances of innovative solutions as well as his analysis of the ratings of innovativeness, the article aims to present the conclusions as for the specific kinds of activities which are indispensable to foster innovativeness in transport. Conclusions: The conclusions derived from the author's analyses and observations show that logistic

Exploration Mission Benefits From Logistics Reduction Technologies

Science.gov (United States)

Broyan, James Lee, Jr.; Schlesinger, Thilini; Ewert, Michael K.

2016-01-01

Technologies that reduce logistical mass, volume, and the crew time dedicated to logistics management become more important as exploration missions extend further from the Earth. Even modest reductions in logical mass can have a significant impact because it also reduces the packing burden. NASA's Advanced Exploration Systems' Logistics Reduction Project is developing technologies that can directly reduce the mass and volume of crew clothing and metabolic waste collection. Also, cargo bags have been developed that can be reconfigured for crew outfitting and trash processing technologies to increase habitable volume and improve protection against solar storm events are under development. Additionally, Mars class missions are sufficiently distant that even logistics management without resupply can be problematic due to the communication time delay with Earth. Although exploration vehicles are launched with all consumables and logistics in a defined configuration, the configuration continually changes as the mission progresses. Traditionally significant ground and crew time has been required to understand the evolving configuration and locate misplaced items. For key mission events and unplanned contingencies, the crew will not be able to rely on the ground for logistics localization assistance. NASA has been developing a radio frequency identification autonomous logistics management system to reduce crew time for general inventory and enable greater crew self-response to unplanned events when a wide range of items may need to be located in a very short time period. This paper provides a status of the technologies being developed and there mission benefits for exploration missions.

78 FR 66039 - Modification of National Customs Automation Program Test Concerning Automated Commercial...

Science.gov (United States)

2013-11-04

... Customs Automation Program Test Concerning Automated Commercial Environment (ACE) Cargo Release (Formerly...) plan to both rename and modify the National Customs Automation Program (NCAP) test concerning the... data elements required to obtain release for cargo transported by air. The test will now be known as...

Logistics & Fintech : from direct benefits to big impacts

NARCIS (Netherlands)

2017-01-01

This whitepaper is the result of the Logistics & Fintech programme, focusing on exchanging knowledge, promoting interest and creating collaboration opportunities between the fintech and logistics industries. This whitepaper presents our vision of financial innovation for the logistics industry,

Big data interoperability challenges for logistics

NARCIS (Netherlands)

Singh, Prince Mayurank; van Sinderen, Marten J.; Zelm, Martin; Doumeingts, Guy; Mendonca, Joao Pedro

Analysis of real time information can be used to leverage logistic value chains and processes. It enables organizations to become more flexible and efficient. With the continued explosion of available data, challenges are aplenty for logistic companies on how to use such data for meaningful service

Sustainability assessment of food chain logistics

NARCIS (Netherlands)

Bloemhof, J.M.; Vorst, van der J.G.A.J.; Bastl, M.; Allaoui, H.

2015-01-01

Food chain logistics plays an important role in the sustainability performance of the food sector. Therefore, project SCALE (Step Change in Agri-food Logistics Ecosystems) started as a collaborative international project, aiming for tools and frameworks for the food sector to make a step change in

The Directions for Development of Logistics Management in Ukraine

Directory of Open Access Journals (Sweden)

Avramenko Elena V.

2017-09-01

Full Text Available The article is aimed at defining problems in the development of logistics management in Ukraine and identifying the main directions of the logistics development. The results of evaluation of the logistics efficiency by the World Bank on the LPI integral indicator were generalized, the dynamics of the main criteria for evaluating the efficiency of Ukrainian logistics for 2007-2016 were reviewed. The directions that will facilitate the development of logistics management in Ukraine have been formed according to the research by «Ukrainian Logistics Alliance».

Flexible use and technique extension of logistics management

Science.gov (United States)

Xiong, Furong

2011-10-01

As we all know, the origin of modern logistics was in the United States, developed in Japan, became mature in Europe, and expanded in China. This is a historical development of the modern logistics recognized track. Due to China's economic and technological development, and with the construction of Shanghai International Shipping Center and Shanghai Yangshan International Deepwater development, China's modern logistics industry will attain a leap-forward development of a strong pace, and will also catch up with developed countries in the Western modern logistics level. In this paper, the author explores the flexibility of China's modern logistics management techniques to extend the use, and has certain practical and guidance significances.

Dari 'Logistic Management' Menuju 'Supply Chain Management' Dan Technology

OpenAIRE

Irawan, Judith Felicia

2003-01-01

To procure materials, maintain in-process inventory and delivery products to customers, companies provided traditional logistics activities. Operational traditional logistics included inbound logistics, intern logistics and outbound logistics, the flow of physical goods, are being managed separately. In the time being, companies cannot handle many problems such as customer service satisfaction. To solve many problems, synchronized management of the flow of physical goods and associated inform...

Automation-aided Task Loads Index based on the Automation Rate Reflecting the Effects on Human Operators in NPPs

International Nuclear Information System (INIS)

Lee, Seungmin; Seong, Poonghyun; Kim, Jonghyun

2013-01-01

Many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs) was suggested. These suggested measures express how much automation support human operators but it cannot express the change of human operators' workload, whether the human operators' workload is increased or decreased. Before considering automation rates, whether the adopted automation is good or bad might be estimated in advance. In this study, to estimate the appropriateness of automation according to the change of the human operators' task loads, automation-aided task loads index is suggested based on the concept of the suggested automation rate. To insure plant safety and efficiency on behalf of human operators, various automation systems have been installed in NPPs, and many works which were previously conducted by human operators can now be supported by computer-based operator aids. According to the characteristics of the automation types, the estimation method of the system automation and the cognitive automation rate were suggested. The proposed estimation method concentrates on the effects of introducing automation, so it directly express how much the automated system support human operators. Based on the suggested automation rates, the way to estimate how much the automated system can affect the human operators' cognitive task load is suggested in this study. When there is no automation, the calculated index is 1, and it means there is no change of human operators' task load

Multivariate semi-logistic distribution and processes | Umar | Journal ...

African Journals Online (AJOL)

Multivariate semi-logistic distribution is introduced and studied. Some characterizations properties of multivariate semi-logistic distribution are presented. First order autoregressive minification processes and its generalization to kth order autoregressive minification processes with multivariate semi-logistic distribution as ...

Asleep at the automated wheel-Sleepiness and fatigue during highly automated driving.

Science.gov (United States)

Vogelpohl, Tobias; Kühn, Matthias; Hummel, Thomas; Vollrath, Mark

2018-03-20

Due to the lack of active involvement in the driving situation and due to monotonous driving environments drivers with automation may be prone to become fatigued faster than manual drivers (e.g. Schömig et al., 2015). However, little is known about the progression of fatigue during automated driving and its effects on the ability to take back manual control after a take-over request. In this driving simulator study with Nö=ö60 drivers we used a three factorial 2ö×ö2ö×ö12 mixed design to analyze the progression (12ö×ö5ömin; within subjects) of driver fatigue in drivers with automation compared to manual drivers (between subjects). Driver fatigue was induced as either mainly sleep related or mainly task related fatigue (between subjects). Additionally, we investigated the drivers' reactions to a take-over request in a critical driving scenario to gain insights into the ability of fatigued drivers to regain manual control and situation awareness after automated driving. Drivers in the automated driving condition exhibited facial indicators of fatigue after 15 to 35ömin of driving. Manual drivers only showed similar indicators of fatigue if they suffered from a lack of sleep and then only after a longer period of driving (approx. 40ömin). Several drivers in the automated condition closed their eyes for extended periods of time. In the driving with automation condition mean automation deactivation times after a take-over request were slower for a certain percentage (about 30%) of the drivers with a lack of sleep (Mö=ö3.2; SDö=ö2.1ös) compared to the reaction times after a long drive (Mö=ö2.4; SDö=ö0.9ös). Drivers with automation also took longer than manual drivers to first glance at the speed display after a take-over request and were more likely to stay behind a braking lead vehicle instead of overtaking it. Drivers are unable to stay alert during extended periods of automated driving without non-driving related tasks. Fatigued drivers could

Should metacognition be measured by logistic regression?

Science.gov (United States)

Rausch, Manuel; Zehetleitner, Michael

2017-03-01

Are logistic regression slopes suitable to quantify metacognitive sensitivity, i.e. the efficiency with which subjective reports differentiate between correct and incorrect task responses? We analytically show that logistic regression slopes are independent from rating criteria in one specific model of metacognition, which assumes (i) that rating decisions are based on sensory evidence generated independently of the sensory evidence used for primary task responses and (ii) that the distributions of evidence are logistic. Given a hierarchical model of metacognition, logistic regression slopes depend on rating criteria. According to all considered models, regression slopes depend on the primary task criterion. A reanalysis of previous data revealed that massive numbers of trials are required to distinguish between hierarchical and independent models with tolerable accuracy. It is argued that researchers who wish to use logistic regression as measure of metacognitive sensitivity need to control the primary task criterion and rating criteria. Copyright © 2017 Elsevier Inc. All rights reserved.

Understanding logistic regression analysis.

Science.gov (United States)

Sperandei, Sandro

2014-01-01

Logistic regression is used to obtain odds ratio in the presence of more than one explanatory variable. The procedure is quite similar to multiple linear regression, with the exception that the response variable is binomial. The result is the impact of each variable on the odds ratio of the observed event of interest. The main advantage is to avoid confounding effects by analyzing the association of all variables together. In this article, we explain the logistic regression procedure using examples to make it as simple as possible. After definition of the technique, the basic interpretation of the results is highlighted and then some special issues are discussed.

Aerial Logistics Management for Carrier Onboard Delivery

Science.gov (United States)

2016-09-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS AERIAL LOGISTICS MANAGEMENT FOR CARRIER ONBOARD DELIVERY by Samuel L. Chen September 2016...AND SUBTITLE AERIAL LOGISTICS MANAGEMENT FOR CARRIER ONBOARD DELIVERY 5. FUNDING NUMBERS 6. AUTHOR(S) Samuel L. Chen 7. PERFORMING ORGANIZATION NAME(S...delivery (COD) is the use of aircraft to transport people and cargo from a forward logistics site (FLS) to a carrier strike group (CSG). The goal of

Procedure automation: the effect of automated procedure execution on situation awareness and human performance

International Nuclear Information System (INIS)

Andresen, Gisle; Svengren, Haakan; Heimdal, Jan O.; Nilsen, Svein; Hulsund, John-Einar; Bisio, Rossella; Debroise, Xavier

2004-04-01

As advised by the procedure workshop convened in Halden in 2000, the Halden Project conducted an experiment on the effect of automation of Computerised Procedure Systems (CPS) on situation awareness and human performance. The expected outcome of the study was to provide input for guidance on CPS design, and to support the Halden Project's ongoing research on human reliability analysis. The experiment was performed in HAMMLAB using the HAMBO BWR simulator and the COPMA-III CPS. Eight crews of operators from Forsmark 3 and Oskarshamn 3 participated. Three research questions were investigated: 1) Does procedure automation create Out-Of-The-Loop (OOTL) performance problems? 2) Does procedure automation affect situation awareness? 3) Does procedure automation affect crew performance? The independent variable, 'procedure configuration', had four levels: paper procedures, manual CPS, automation with breaks, and full automation. The results showed that the operators experienced OOTL problems in full automation, but that situation awareness and crew performance (response time) were not affected. One possible explanation for this is that the operators monitored the automated procedure execution conscientiously, something which may have prevented the OOTL problems from having negative effects on situation awareness and crew performance. In a debriefing session, the operators clearly expressed their dislike for the full automation condition, but that automation with breaks could be suitable for some tasks. The main reason why the operators did not like the full automation was that they did not feel being in control. A qualitative analysis addressing factors contributing to response time delays revealed that OOTL problems did not seem to cause delays, but that some delays could be explained by the operators having problems with the freeze function of the CPS. Also other factors such as teamwork and operator tendencies were of importance. Several design implications were drawn

NATO Logistics Handbook

National Research Council Canada - National Science Library

2007-01-01

...), is intended as a simple guide to logistics in NATO. It does not attempt to examine current issues or provide answers to the problems that logisticians will face, but it rather aims at introducing them to some of the basic principles, policies...

Standards for Standardized Logistic Regression Coefficients

Science.gov (United States)

Menard, Scott

2011-01-01

Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

Problems of logistic systems sustainable development in delivery chains

Directory of Open Access Journals (Sweden)

2011-12-01

Full Text Available Background: Realization of supply chains management paradigm, covering significantly more volumes of logistic space, logically leads to complication of logistic systems, which, in its turn, arises significant number of problems of both theoretical and practical character. In our opinion, not all the aspects of logistic systems design and their sustainable functioning have received by the present time corresponding coverage in scientific literature. More detailed consideration requires specific problems of logistic systems interaction with their environment. We can talk about formation of new scientific direction (which we suggest to name logistic environics, being applied addition to classical approach to design of logistic systems. Methods: the formalized description of interaction process for logistic systems with the environment was presented and discussed  from ecological, social, economical, organizational and technological, technical, natural scientific positions. Results and conclusions: There is an interaction between logistics systems and the environment, but formalized description of logistic systems interaction process with the environment requires performance of complex interdisciplinary research from many different positions.

Characteristics of Logistics Outsourcing in Bulgaria: The Perspectives of the Logistics Service Providers and their Customers

Directory of Open Access Journals (Sweden)

Rakovska Miroslava

2016-10-01

Full Text Available The increased demand and supply of logistics services bring together the logistics service providers (LSPs and the companies that outsource logistics activities. LSPs stand in between those companies and their customers, thus playing an essential role for supply chain integration. If the two parties have different viewpoints of the processes in the supply chain, the fulfillment of the goal to satisfy the end customers may be hindered. The purpose of this article is two-fold: First, to investigate the characteristics of logistics outsourcing in Bulgaria from the perspectives of the logistics service providers and their customers, and more specifically, to compare their viewpoints concerning the motives for outsourcing, the methods and contents of communication and some relationship management aspects; Second, to assess the relations of the communication and relationship management aspects to customer satisfaction. This article is based on empirical data provided by 138 manufacturing and trading companies and 136 LSPs and collected through two structured questionnaires designed to address the researched issues. The data were analyzed using descriptive statistics and the independent samples t-test. The research found that the service related reasons for logistics outsourcing are prevailing and that LSPs overestimate, compared to manufacturing and trading companies, motives related to service, organizational capabilities and relationships, while more manufacturing and trading companies concern as important the availability of logistics assets and the provision of value-added services. The research also found that both the LSPs and their customers consider that the extent of sharing of knowledge and information essential for material flow integration is very low and that the usage of team meetings and joint teams is quite rare. Also, customers do not view their relationships with the LSPs as so collaborative as viewed by the LSPs. Furthermore, the

Crisis Management- Operational Logistics & Asset Visibility Technologies

National Research Council Canada - National Science Library

Braunbeck, Richard A; Mastria, Michael F

2006-01-01

The purpose of this MBA Project was to identify and explore logistical frameworks that leverage technology to overcome problems associated with coordinated logistics operations during crisis management...

Automation-aided Task Loads Index based on the Automation Rate Reflecting the Effects on Human Operators in NPPs

Energy Technology Data Exchange (ETDEWEB)

Lee, Seungmin; Seong, Poonghyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2013-05-15

Many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs) was suggested. These suggested measures express how much automation support human operators but it cannot express the change of human operators' workload, whether the human operators' workload is increased or decreased. Before considering automation rates, whether the adopted automation is good or bad might be estimated in advance. In this study, to estimate the appropriateness of automation according to the change of the human operators' task loads, automation-aided task loads index is suggested based on the concept of the suggested automation rate. To insure plant safety and efficiency on behalf of human operators, various automation systems have been installed in NPPs, and many works which were previously conducted by human operators can now be supported by computer-based operator aids. According to the characteristics of the automation types, the estimation method of the system automation and the cognitive automation rate were suggested. The proposed estimation method concentrates on the effects of introducing automation, so it directly express how much the automated system support human operators. Based on the suggested automation rates, the way to estimate how much the automated system can affect the human operators' cognitive task load is suggested in this study. When there is no automation, the calculated index is 1, and it means there is no change of human operators' task load.

Reference model analysis of suitability for logistics management

Directory of Open Access Journals (Sweden)

Cezary Mańkowski

2011-12-01

Full Text Available Reference models are one of the many instruments aspiring to find into a set of different concepts, methods and techniques used in managing the logistics. Therefore, the aim of this paper is to present the results of assessing the suitability of reference models for solving logistical problems. This evaluation indicates that they are universal, support the realization of all the logistics management function in various areas, such as logistics of manufacturing glass products.

Halal Logistics Implementation in Malaysia: A Practical View

Science.gov (United States)

Sham, Rohana; Zuraidah Rasi, Raja; Abdamia, Noranita; Mohamed, Suhana; Thahira Bibi, TKM

2017-08-01

Concept of halal is not only acceptable world wide by the Muslim society but also to the non Muslim. However, the implementing of halal logistics in daily operation experience a few difficulties especially on the implementation part. Although there are many academic research paper that highlight the issue of halal logistics and the critical success factor, until today, halal logistics in Malaysia is still experiencing a hiccup. This paper try to highlight a few simple ways of implementation of halal logistics that could enhance the total implementation concept at the very least cost to create benefit to all society. The Paper deals with a few aspect of possible implementation and practice to facilitate the halal logistics approach in daily operation. The main objective is to look at the possible method of implementation and critical success factors towards the implementation of halal logistics operation in daily goods movement in Malaysia.

ASSESSMENT OF LOGISTICS MANAGEMENT IN GHANA HEALTH SERVICE

Directory of Open Access Journals (Sweden)

john frimpong manso

2013-08-01

Full Text Available Ghana Public Health Sector runs a three-tier system of managing health commodities. Suppliers, the Central Medical Store, The Regional Medical Store, Service Delivery Points and the transportation system form the supply chain.  Ghana Health Service logistics system is centralized and the health care delivery system is decentralized. Logistics management in the health system is crucial. This is because there are instances where medicines and health commodities are not available at the Central Medical Stores and the Regional Medical Stores. Consequently, there is no commodity security at the service delivery points. Upon this backdrop the study seeks to assess the logistics management system in order to bring efficiency in the system. The study adopts a multi-case study approach to assess the practices of logistics management, the causes of inadequacy of logistics and the strengths and weaknesses in Ghana Health Service logistics system.  Two categories of participants that is, the key players of health logistics management and end-users were involved in the study.  Four variables; finance for procurement of health commodities, evenly distribution of health commodities, effective supervision and constant monitoring and evaluation were found crucial in effective and efficient logistics management. Moreover, it was found that poor procurement planning and budgeting, lack of financial resources for procurement, poor quantification and forecasting, delay in procurement process and order processing, and delay in receiving insurance claims are some of the causes of inadequacy of logistics in the health systems. It is recommended that Ghana Health Service logistics or supply system must receive constant monitoring and evaluation. Further, Ghana Health Service must ensure that there is effective top-down supervision in the system to bring up efficiency. Again, Ghana Health Service and Ministry of Health must ensure enough funds are secured from the

Space Station - An integrated approach to operational logistics support

Science.gov (United States)

Hosmer, G. J.

1986-01-01

Development of an efficient and cost effective operational logistics system for the Space Station will require logistics planning early in the program's design and development phase. This paper will focus on Integrated Logistics Support (ILS) Program techniques and their application to the Space Station program design, production and deployment phases to assure the development of an effective and cost efficient operational logistics system. The paper will provide the methodology and time-phased programmatic steps required to establish a Space Station ILS Program that will provide an operational logistics system based on planned Space Station program logistics support.

MANAGING INNOVATION PROJECTS USING DISTRIBUTION LOGISTICS

Directory of Open Access Journals (Sweden)

Erika Loučanová

2015-12-01

Full Text Available A significant part of innovation projects management is the distribution logistics. From the point of view of time and material content, the properly chosen way of distribution is one of many factors for success of the project and innovation creation itself. The paper points out the fundamental basis of innovation management in the stage of its realization referring to the importance of distribution logistics in this part of innovation project management. Distribution logistics in the project management provides comprehensive solutions to efficiency of tangible relocating processes in all connections and mutual relations of project in order to maintain compliance between economy and business when implementing innovations.

Challenges of information technology and supply chain management in logistic sector: with an overview of Quehenberger logistics in Macedonia

OpenAIRE

Temjanovski, Riste

2014-01-01

Abstract— The Logistics and freight transport industries are ones of the most dynamic and important sectors of each economy. Logistics provides a vital “backbone” function in supporting macroeconomic processes and the operation of markets, critical infrastructures and distribution to both business and consumers, which extended much more with process of globalization. Every contemporary logistic company is conducted by the quality and precious with IT technologies in supply chain manage...

Wine industry logistics in Republic of Macedonia

OpenAIRE

Ivanova, Violeta; Atanasoski, Drasko

2013-01-01

The theoretical characteristics of logistics and logistics systems are numerous, with specific characteristics, different implications and missions. Logistics activities in the wine industry are very important. Macedonia is a large exporter of wine. In terms of export value of agricultural products in Macedonia, wine is at the first place in terms of exports of alcoholic beverages, and at the second place immediately after the tobacco. The winemaking in Macedonia is continuously increasing, e...

Logistics & Fintech: from direct benefits to big impacts

OpenAIRE

2017-01-01

This whitepaper is the result of the Logistics & Fintech programme, focusing on exchanging knowledge, promoting interest and creating collaboration opportunities between the fintech and logistics industries. This whitepaper presents our vision of financial innovation for the logistics industry, with best practices and future developments.

[Time consumption and quality of an automated fusion tool for SPECT and MRI images of the brain].

Science.gov (United States)

Fiedler, E; Platsch, G; Schwarz, A; Schmiedehausen, K; Tomandl, B; Huk, W; Rupprecht, Th; Rahn, N; Kuwert, T

2003-10-01

Although the fusion of images from different modalities may improve diagnostic accuracy, it is rarely used in clinical routine work due to logistic problems. Therefore we evaluated performance and time needed for fusing MRI and SPECT images using a semiautomated dedicated software. PATIENTS, MATERIAL AND METHOD: In 32 patients regional cerebral blood flow was measured using (99m)Tc ethylcystein dimer (ECD) and the three-headed SPECT camera MultiSPECT 3. MRI scans of the brain were performed using either a 0,2 T Open or a 1,5 T Sonata. Twelve of the MRI data sets were acquired using a 3D-T1w MPRAGE sequence, 20 with a 2D acquisition technique and different echo sequences. Image fusion was performed on a Syngo workstation using an entropy minimizing algorithm by an experienced user of the software. The fusion results were classified. We measured the time needed for the automated fusion procedure and in case of need that for manual realignment after automated, but insufficient fusion. The mean time of the automated fusion procedure was 123 s. It was for the 2D significantly shorter than for the 3D MRI datasets. For four of the 2D data sets and two of the 3D data sets an optimal fit was reached using the automated approach. The remaining 26 data sets required manual correction. The sum of the time required for automated fusion and that needed for manual correction averaged 320 s (50-886 s). The fusion of 3D MRI data sets lasted significantly longer than that of the 2D MRI data. The automated fusion tool delivered in 20% an optimal fit, in 80% manual correction was necessary. Nevertheless, each of the 32 SPECT data sets could be merged in less than 15 min with the corresponding MRI data, which seems acceptable for clinical routine use.

Automation of radioimmunoassay

International Nuclear Information System (INIS)

Yamaguchi, Chisato; Yamada, Hideo; Iio, Masahiro

1974-01-01

Automation systems for measuring Australian antigen by radioimmunoassay under development were discussed. Samples were processed as follows: blood serum being dispensed by automated sampler to the test tube, and then incubated under controlled time and temperature; first counting being omitted; labelled antibody being dispensed to the serum after washing; samples being incubated and then centrifuged; radioactivities in the precipitate being counted by auto-well counter; measurements being tabulated by automated typewriter. Not only well-type counter but also position counter was studied. (Kanao, N.)

Web-Based Naval Fleet Logistics Information System

National Research Council Canada - National Science Library

Li, Yanfeng

2007-01-01

.... This project proposes the implementation of a Web-Based Logistics Information System to act as a single platform for Naval supply chain and shipboard customers for effective logistics planning...

77 FR 48527 - National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE...

Science.gov (United States)

2012-08-14

... National Customs Automation Program (NCAP) test concerning the simplified entry functionality in the... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE) Simplified Entry: Modification of...

State of Logistics – an overview of logistics in South Africa

CSIR Research Space (South Africa)

Ittmann, HW

2010-09-01

Full Text Available Logistics and supply chain management play a big role in any economy and are a critical contributor to the competitiveness of a country. The demand for products can only be satisfied through the proper and cost-effective delivery of goods...

Logistics and Planning of Output Volume

Directory of Open Access Journals (Sweden)

V. I. Pokhabov

2005-01-01

Full Text Available On the basis of logistics conception the paper considers an adaptation of an enterprise to environmental changes with due account of its emergement properties. Taking into account emergement properties of an enterprise a logistics method for planning an optimum movement of the material flow is proposed in the paper.

Getting logistics closer to end users

NARCIS (Netherlands)

Luis, J.G.; Hernández, J.G.; Rodriguez, G.P.; Carcel, G.H.; Hofman, W.

2014-01-01

Nowadays, logistics could make you purchase a book in Amazon and delivering it in 24-hours using a service from a logistics operator or a transport company. In a more complex scenario, an order could be traveling around the globe, passing from hand to hand between unknown actors for months. In most

Comparison of the binary logistic and skewed logistic (Scobit) models of injury severity in motor vehicle collisions.

Science.gov (United States)

Tay, Richard

2016-03-01

The binary logistic model has been extensively used to analyze traffic collision and injury data where the outcome of interest has two categories. However, the assumption of a symmetric distribution may not be a desirable property in some cases, especially when there is a significant imbalance in the two categories of outcome. This study compares the standard binary logistic model with the skewed logistic model in two cases in which the symmetry assumption is violated in one but not the other case. The differences in the estimates, and thus the marginal effects obtained, are significant when the assumption of symmetry is violated. Copyright © 2015 Elsevier Ltd. All rights reserved.

IMPORTANCE OF LOGISTICS OPERATORS IN INTERNATIONAL MARKET

OpenAIRE

KATARZYNA GRONDYS; RUZENA LOVASOVA; ANNA STELMASZCZYK; WIKTOR JANIK

2014-01-01

The aim of the article is to present role and importance of logistics operations in international arena. The article focuses on forms of outsourcing in logistics and their evolution over the years. The article discusses in detail the scope of logistics operators' activities on global scale over several years. Article also presents results of research, their analysis according to the sector of activities, their percentage share and financial benefits of using 3PL service providers. The progres...

INFORMATION SECURITY IN LOGISTICS COOPERATION

Directory of Open Access Journals (Sweden)

Tomasz Małkus

2015-03-01

Full Text Available Cooperation of suppliers of raw materials, semi-finished products, finished products, wholesalers, retailers in the form of the supply chain, as well as outsourcing of specialized logistics service require ensuring adequate support of information. It concerns the use of appropriate computer tools. The security of information in such conditions of collaboration becomes the important problem for parties of contract. The objective of the paper is to characterize main issues relating to security of information in logistics cooperation.

Laboratory Automation and Middleware.

Science.gov (United States)

Riben, Michael

2015-06-01

The practice of surgical pathology is under constant pressure to deliver the highest quality of service, reduce errors, increase throughput, and decrease turnaround time while at the same time dealing with an aging workforce, increasing financial constraints, and economic uncertainty. Although not able to implement total laboratory automation, great progress continues to be made in workstation automation in all areas of the pathology laboratory. This report highlights the benefits and challenges of pathology automation, reviews middleware and its use to facilitate automation, and reviews the progress so far in the anatomic pathology laboratory. Copyright © 2015 Elsevier Inc. All rights reserved.

Managing laboratory automation.

Science.gov (United States)

Saboe, T J

1995-01-01

This paper discusses the process of managing automated systems through their life cycles within the quality-control (QC) laboratory environment. The focus is on the process of directing and managing the evolving automation of a laboratory; system examples are given. The author shows how both task and data systems have evolved, and how they interrelate. A BIG picture, or continuum view, is presented and some of the reasons for success or failure of the various examples cited are explored. Finally, some comments on future automation need are discussed.

Proceedings of China modern logistics engineering inheritance, wisdom, innovation and cooperation

CERN Document Server

2015-01-01

Proceedings of China Modern Logistics Engineering covers nearly all areas of logistics engineering technology, focusing on the latest findings and the following theoretical aspects: Logistics Systems and Management Research; Green Logistics and Emergency Logistics; Enterprise Logistics; Material Handling; Warehousing Technology Research; Supply Chain Management; Logistics Equipment; Logistics Packaging Technology; Third-party Logistics, etc. The book will help readers to grasp the relevant aspects of the theory involved, research and development trends, while also offering guidance for their work and related studies. It is intended for researchers, scholars and graduate students in logistics management, logistics engineering, transportation, business administration, E-commerce and industrial engineering.

Determination of the Optimized Automation Rate considering Effects of Automation on Human Operators in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Seung Min; Seong, Poong Hyun; Kim, Jong Hyun; Kim, Man Cheol

2015-01-01

Automation refers to the use of a device or a system to perform a function previously performed by a human operator. It is introduced to reduce the human errors and to enhance the performance in various industrial fields, including the nuclear industry. However, these positive effects are not always achieved in complex systems such as nuclear power plants (NPPs). An excessive introduction of automation can generate new roles for human operators and change activities in unexpected ways. As more automation systems are accepted, the ability of human operators to detect automation failures and resume manual control is diminished. This disadvantage of automation is called the Out-of-the- Loop (OOTL) problem. We should consider the positive and negative effects of automation at the same time to determine the appropriate level of the introduction of automation. Thus, in this paper, we suggest an estimation method to consider the positive and negative effects of automation at the same time to determine the appropriate introduction of automation. This concept is limited in that it does not consider the effects of automation on human operators. Thus, a new estimation method for automation rate was suggested to overcome this problem

Drive design. Mechatronics for production and logistics; Antriebsloesungen. Mechatronik fuer Produktion und Logistik

Energy Technology Data Exchange (ETDEWEB)

Kiel, Edwin (ed.) [Lenze AG, Aerzen (Germany)

2007-07-01

Highly automated production and logistic systems require mechatronic drives. The book describes how industrial production and logistics work, and how the appropriate drive systems should be designed. The function of the mechanical and electronic elements of a drive system is described, including the required software, and the fundamentals of dimensioning are gone into. The authors also discuss engineering, reliability and important life cycle aspects. Applications in material flow and handling technology, in continuous and clocked production lines and finishing processes are presented in twelve sections offering different drive solutions for the motor, current inverter and software, transmission system and mechanical elements. The specific requirements and functionalities of these twelve solutions are presented. The focus is on energy conversion with controlled electric drive systems. (orig.) [German] Hochautomatisierte Produktions- und Logistikanlagen benoetigen mechatronische Antriebsloesungen. Dieses Buch beschreibt, wie die industrielle Fertigung und Logistik arbeitet und wie die hierzu erforderlichen Antriebsloesungen aufgebaut sind. Es wird die Funktionsweise der mechanischen und der elektronischen Elemente eines Antriebssystems einschliesslich der Software beschrieben und ihre Dimensionierungsgrundlagen behandelt. Die Autoren gehen darueber hinaus auf das Engineering, die Zuverlaessigkeit und auf wichtige Aspekte des Lebenszyklus ein. Die Vielzahl der Anwendungen in der Materialfluss- und der Handhabungstechnik, in kontinuierlichen und getakteten Produktionslinien sowie fuer Bearbeitungsprozesse wird in insgesamt zwoelf Antriebsloesungen eingeteilt. Diese umfassen den Motor, den Umrichter mit seiner Software, das Getriebe sowie mechanische Antriebselemente. Es werden die spezifischen Anforderungen und die Funktionalitaet dieser zwoelf Loesungen dargestellt. Dabei konzentrieren sich die Autoren auf die Energieumsetzung mit geregelten elektrischen

78 FR 44142 - Modification of Two National Customs Automation Program (NCAP) Tests Concerning Automated...

Science.gov (United States)

2013-07-23

... Customs Automation Program (NCAP) Tests Concerning Automated Commercial Environment (ACE) Document Image... (CBP's) plan to modify the National Customs Automation Program (NCAP) tests concerning document imaging... entry process by reducing the number of data elements required to obtain release for cargo transported...

The Science of Home Automation

Science.gov (United States)

Thomas, Brian Louis

Smart home technologies and the concept of home automation have become more popular in recent years. This popularity has been accompanied by social acceptance of passive sensors installed throughout the home. The subsequent increase in smart homes facilitates the creation of home automation strategies. We believe that home automation strategies can be generated intelligently by utilizing smart home sensors and activity learning. In this dissertation, we hypothesize that home automation can benefit from activity awareness. To test this, we develop our activity-aware smart automation system, CARL (CASAS Activity-aware Resource Learning). CARL learns the associations between activities and device usage from historical data and utilizes the activity-aware capabilities to control the devices. To help validate CARL we deploy and test three different versions of the automation system in a real-world smart environment. To provide a foundation of activity learning, we integrate existing activity recognition and activity forecasting into CARL home automation. We also explore two alternatives to using human-labeled data to train the activity learning models. The first unsupervised method is Activity Detection, and the second is a modified DBSCAN algorithm that utilizes Dynamic Time Warping (DTW) as a distance metric. We compare the performance of activity learning with human-defined labels and with automatically-discovered activity categories. To provide evidence in support of our hypothesis, we evaluate CARL automation in a smart home testbed. Our results indicate that home automation can be boosted through activity awareness. We also find that the resulting automation has a high degree of usability and comfort for the smart home resident.

Adaptive Automation Design and Implementation

Science.gov (United States)

2015-09-17

with an automated system to a real-world adaptive au- tomation system implementation. There have been plenty of adaptive automation 17 Adaptive...of systems without increasing manpower requirements by allocating routine tasks to automated aids, improving safety through the use of au- tomated ...between intermediate levels of au- tomation , explicitly defining which human task a given level automates. Each model aids the creation and classification

Layered distributed architecture for plant automation

International Nuclear Information System (INIS)

Aravamuthan, G.; Verma, Yachika; Ranjan, Jyoti; Chachondia, Alka S.; Ganesh, G.

2005-01-01

The development of plant automation system and associated software remains one of the greatest challenges to the widespread implementation of highly adaptive re-configurable automation technology. This paper presents a layered distributed architecture for a plant automation system designed to support rapid reconfiguration and redeployment of automation components. The paper first presents evolution of automation architecture and their associated environment in the past few decades and then presents the concept of layered system architecture and the use of automation components to support the construction of a wide variety of automation system. It also highlights the role of standards and technology, which can be used in the development of automation components. We have attempted to adhere to open standards and technology for the development of automation component at a various layers. It also highlights the application of this concept in the development of an Operator Information System (OIS) for Advanced Heavy Water Reactor (AHWR). (author)

Semantics-based Automated Web Testing

Directory of Open Access Journals (Sweden)

Hai-Feng Guo

2015-08-01

Full Text Available We present TAO, a software testing tool performing automated test and oracle generation based on a semantic approach. TAO entangles grammar-based test generation with automated semantics evaluation using a denotational semantics framework. We show how TAO can be incorporated with the Selenium automation tool for automated web testing, and how TAO can be further extended to support automated delta debugging, where a failing web test script can be systematically reduced based on grammar-directed strategies. A real-life parking website is adopted throughout the paper to demonstrate the effectivity of our semantics-based web testing approach.

Analysis of Logistics Costs of the Ukrainian Semiconductor Industry

Directory of Open Access Journals (Sweden)

Popova Viktoriya D.

2014-01-01

Full Text Available The goal of the article is analysis of logistics costs in production of semiconductor materials using example of two Ukrainian enterprises. The article studies influence of logistics management and logistics costs upon formation of the final cost value (price of a commodity (service. It gives an assessment of logistics costs of Ukrainian semiconductor enterprises and establishes its structure by types of main expenditure items: material, transport, production and storehouse. It establishes the generalised quantitative structure of logistics costs of Ukrainian semiconductor enterprises with various forms of ownership under conditions of a situational growth of cost value of products and reduction of profitability of production, caused by common crisis tendencies in economy. Prospects of further studies in this direction are analysis of costs in production of semiconductor products and establishment of the specific feature of their grouping and classifying from the point of view of logistics and justification of the model of assessment of cost value of products, which takes into account mutually contradictory influence of direct logistics costs and logistics management upon the final result.

Customer satisfaction with the quality of the logistic services

Directory of Open Access Journals (Sweden)

Małgorzata Lisińska-Kuśnierz

2014-03-01

Full Text Available Background: Logistics services are evaluated mainly by measuring customer satisfaction. Measurement of the customer satisfaction provides the information about how organizations operate as well as how to effectively satisfy customer needs. The aim of this paper is to propose an evaluation model of the customer satisfaction of the quality of the logistic services provided. The research in this paper was focused on the evaluation of the level of customer satisfaction in the context of logistics service as well as on the analysis of importance of ten logistic services attributes influencing customer satisfaction. Methods: The research was conducted on the basis of the questionnaire designed for purchasers of logistic services. The subjects of the research were companies which are using refrigerated transport. Results: To define relation between level of customer satisfaction in the context of logistic service and logistic service attributes impacting this satisfaction Pearson's correlation method was used. In turn the model to evaluate the customer satisfaction in the context of logistic services in scope of refrigerated transport was built using multiple regression and stepwise regression methods.

Integrated Computer System of Management in Logistics

Science.gov (United States)

Chwesiuk, Krzysztof

2011-06-01

This paper aims at presenting a concept of an integrated computer system of management in logistics, particularly in supply and distribution chains. Consequently, the paper includes the basic idea of the concept of computer-based management in logistics and components of the system, such as CAM and CIM systems in production processes, and management systems for storage, materials flow, and for managing transport, forwarding and logistics companies. The platform which integrates computer-aided management systems is that of electronic data interchange.

Logistics. Crucial link

International Nuclear Information System (INIS)

Wells, M.

1996-01-01

The article relates to offshore cost reduction in the UK and Norwegian sectors. Improvements within logistics and industrial co-operation are discussed being inspired by the joint government and industry NORSOK programme and the similar UK CRINE programme. Examples on cost reduction in various projects are given. 1 fig

International Trade Logistic Services Competitiveness in the Pacific Basin

Directory of Open Access Journals (Sweden)

América Ivonne Zamora Torres

2014-06-01

Full Text Available The development of efficient logistics plays a crucial role in national trade competitiveness. The present study aims to determine Mexico´s foreign trade logistics competitiveness with respect to the largest economies of the Asia-Pacific Economic Cooperation in 2012. The study considers three key variables: customs, international transport and logistics services. It uses a principal components analysis to compute a foreign trade logistics competitiveness index. The results indicate that the three variables have a direct and significant impact on international trade logistics competitiveness. According to the analyzed variables, the most competitive countries are, in descending order, Panama, China, Singapore, Korea and Thailand. The study identifies improvement opportunities for Mexico on the logistics and customs factors.

Automation in organizations: Eternal conflict

Science.gov (United States)

Dieterly, D. L.

1981-01-01

Some ideas on and insights into the problems associated with automation in organizations are presented with emphasis on the concept of automation, its relationship to the individual, and its impact on system performance. An analogy is drawn, based on an American folk hero, to emphasize the extent of the problems encountered when dealing with automation within an organization. A model is proposed to focus attention on a set of appropriate dimensions. The function allocation process becomes a prominent aspect of the model. The current state of automation research is mentioned in relation to the ideas introduced. Proposed directions for an improved understanding of automation's effect on the individual's efficiency are discussed. The importance of understanding the individual's perception of the system in terms of the degree of automation is highlighted.

The Multinational Logistics Joint Task Force (MLJTF)

National Research Council Canada - National Science Library

Higginbotham, Matthew T

2007-01-01

In this monograph, by analyzing the UN, NATO and the US Army's evolving Modular Logistics Doctrine, the author integrates the key areas from each doctrine into a multinational logistics joint task force (MLJTF) organization...

Mobile home automation-merging mobile value added services and home automation technologies

OpenAIRE

Rosendahl, Andreas; Hampe, Felix J.; Botterweck, Goetz

2007-01-01

non-peer-reviewed In this paper we study mobile home automation, a field that emerges from an integration of mobile application platforms and home automation technologies. In a conceptual introduction we first illustrate the need for such applications by introducing a two-dimensional conceptual model of mobility. Subsequently we suggest an architecture and discuss different options of how a user might access a mobile home automation service and the controlled devices. As another contrib...

Seasonality and the logistic map

International Nuclear Information System (INIS)

Silva, Emily; Peacock-Lopez, Enrique

2017-01-01

Nonlinear difference equations, such as the logistic map, have been used to study chaos and also to model population dynamics. Here we propose a model that extends the “lose + lose = win” behavior found in Parrondo’s Paradox, where switching between chaotic parameters in the logistic map yields periodic behavior (“chaos + chaos = order”). The model uses twelve parameters each reflecting the conditions of one of the twelve months. In this paper we study the effects of smooth-transitioning parameters and the robust system that emerges.

Logistics of Guinea worm disease eradication in South Sudan.

Science.gov (United States)

Jones, Alexander H; Becknell, Steven; Withers, P Craig; Ruiz-Tiben, Ernesto; Hopkins, Donald R; Stobbelaar, David; Makoy, Samuel Yibi

2014-03-01

From 2006 to 2012, the South Sudan Guinea Worm Eradication Program reduced new Guinea worm disease (dracunculiasis) cases by over 90%, despite substantial programmatic challenges. Program logistics have played a key role in program achievements to date. The program uses disease surveillance and program performance data and integrated technical-logistical staffing to maintain flexible and effective logistical support for active community-based surveillance and intervention delivery in thousands of remote communities. Lessons learned from logistical design and management can resonate across similar complex surveillance and public health intervention delivery programs, such as mass drug administration for the control of neglected tropical diseases and other disease eradication programs. Logistical challenges in various public health scenarios and the pivotal contribution of logistics to Guinea worm case reductions in South Sudan underscore the need for additional inquiry into the role of logistics in public health programming in low-income countries.

Service Innovation and Sustainability in the Danish Logistics Sector

DEFF Research Database (Denmark)

Gammelgaard, Britta; Prockl, Günter; Thordardottir, Kristin

2012-01-01

in the logistics sector, but also that a sustainability profile is not used as a driver for marketing new sustainable logistics services. The customers, on the other hand, are focused on price, geographical coverage and reliability of delivery. This study reports a portion of survey results that cover more issues......Sustainability in the logistics sector is much talked about, but at the same time there is little overview of the current activities. This paper provides an input to such an overview of logistics services provided in the Danish logistics sector in 2011. The purpose of the study is also...... to investigate driving forces of development towards sustainable logistics services from the industry. The paper is descriptive and based on an online survey sent to managing directors of 201 companies in the Danish logistics sector. The survey questions were developed on the basis of literature studies...

Experience of automation failures in training: effects on trust, automation bias, complacency and performance.

Science.gov (United States)

Sauer, Juergen; Chavaillaz, Alain; Wastell, David

2016-06-01

This work examined the effects of operators' exposure to various types of automation failures in training. Forty-five participants were trained for 3.5 h on a simulated process control environment. During training, participants either experienced a fully reliable, automatic fault repair facility (i.e. faults detected and correctly diagnosed), a misdiagnosis-prone one (i.e. faults detected but not correctly diagnosed) or a miss-prone one (i.e. faults not detected). One week after training, participants were tested for 3 h, experiencing two types of automation failures (misdiagnosis, miss). The results showed that automation bias was very high when operators trained on miss-prone automation encountered a failure of the diagnostic system. Operator errors resulting from automation bias were much higher when automation misdiagnosed a fault than when it missed one. Differences in trust levels that were instilled by the different training experiences disappeared during the testing session. Practitioner Summary: The experience of automation failures during training has some consequences. A greater potential for operator errors may be expected when an automatic system failed to diagnose a fault than when it failed to detect one.

Future Trends in Process Automation

OpenAIRE

Jämsä-Jounela, Sirkka-Liisa

2007-01-01

The importance of automation in the process industries has increased dramatically in recent years. In the highly industrialized countries, process automation serves to enhance product quality, master the whole range of products, improve process safety and plant availability, efficiently utilize resources and lower emissions. In the rapidly developing countries, mass production is the main motivation for applying process automation. The greatest demand for process automation is in the chemical...

Optimalization of logistic costs by the controlling approach

OpenAIRE

Katarína Teplická

2007-01-01

Article deals with logistic cost problems, their following, reporting and evaluation in the firm. It gives basic information about possible access of the effective decreasing of the logistic cost by the way of controlling access, or evaluation of Balance Score Card. It indicates short algorithm of logistic costs reporting by the way of controlling.

76 FR 34246 - Automated Commercial Environment (ACE); Announcement of National Customs Automation Program Test...

Science.gov (United States)

2011-06-13

... Environment (ACE); Announcement of National Customs Automation Program Test of Automated Procedures for In... Customs Automation Program (NCAP) test relating to highway movements of commercial goods that are transported in-bond through the United States from one point in Canada to another point in Canada. The NCAP...

Research on the Impact of Big Data on Logistics

Directory of Open Access Journals (Sweden)

Wang Yaxing

2017-01-01

Full Text Available In the context of big data development, a large amount of data will appear at logistics enterprises, especially in the aspect of logistics, such as transportation, warehousing, distribution and so on. Based on the analysis of the characteristics of big data, this paper studies the impact of big data on the logistics and its action mechanism, and gives reasonable suggestions. Through building logistics data center by using the big data technology, some hidden value information behind the data will be digged out, in which the logistics enterprises can benefit from it.

Automated cloning methods.; TOPICAL

International Nuclear Information System (INIS)

Collart, F.

2001-01-01

Argonne has developed a series of automated protocols to generate bacterial expression clones by using a robotic system designed to be used in procedures associated with molecular biology. The system provides plate storage, temperature control from 4 to 37 C at various locations, and Biomek and Multimek pipetting stations. The automated system consists of a robot that transports sources from the active station on the automation system. Protocols for the automated generation of bacterial expression clones can be grouped into three categories (Figure 1). Fragment generation protocols are initiated on day one of the expression cloning procedure and encompass those protocols involved in generating purified coding region (PCR)

Logistics in 2025: Consider It DoneZ

National Research Council Canada - National Science Library

Edgell, Jaydee

1996-01-01

Accessibility replaces anxiety in 2025 logistics. Confident that logistics systems will generate what they need when they need it, commanders of aerospace forces in the year 2025 contemplate strategy and devote their energy to the battle...

Global Logistic Network of Courier Services for the 21" Century

Directory of Open Access Journals (Sweden)

Ratko Zelenika

2006-09-01

Full Text Available The development of logistics has contributed a lot to all thebranches of economy. A successful economic subject cannotexist without a well-developed logistic branch. In economicsthe organization of logistics is becoming a strategic element regardingthe policy making of enterprises. Logistics belongs to anarea that will play an important role in our lives; therefore, thedevelopment of a logistic system is of an exceptional significancefor the economy and also for the non-economic sphere ofactivities. So, modem logistics enables us to bring into line differentinterests in management of material current. Global organizersof logistic services are developing and specializing insome essential services, such as combining of cargo into assemblyconsignments and also their distribution. The biggest globaltenderers of logistic services are considered, DHL, TNT,FEDEX, UPS ...

Logistics in a low carbon concept: Connotation and realization way

Science.gov (United States)

Zheng, Chaocheng; Qiu, Xiaoying; Mao, Jiarong

2017-01-01

Low-carbon logistics has become a trend for the logistics industry-as a high-energy consumption industry, continuation of its previous operating mode has been significantly behind the times. So logistics industry must release lower carbon emissions. This paper sort out the literature home and abroad from three aspects, that is, the definition of low-carbon logistics, low-carbon logistics implementation mechanisms or measures, and low carbon design quantitative models. The research shows: low-carbon logistics needed to implemented both in enterprise' macro and micro level, which means the government should provide relevant policy support and micro enterprises should be actively sought from all sectors of the logistics in energy saving. In practice, low-carbon logistics optimization models are effective tools for enterprises to implement emission reduction.

The 5th National Logistics and Supply Chain Conference

OpenAIRE

PEKER, İskender

2016-01-01

Abstract. The 5thNational Logistics and Supply Chain Conference (ULTZK) held in Mersin Divan Hotel on the 26-28 May 2016. A number of academics, logistics service receiver company representatives (manufacturers, wholesalers, retailers, etc.), logistics service provider company representatives (transport, logistics, storage, etc.), non-governmental organization representatives, and the relevant public institution and organization representatives participated to the conducted panels and session...

The state of logistics: Research priorities for sustained improvement

Directory of Open Access Journals (Sweden)

Esbeth van Dyk

2008-11-01

Full Text Available The importance of logistics and supply chain management for the South African economy was re-emphasised by the findings of the CSIR’s third annual State of Logistics Survey. To meet current and future demands, the research agenda for logistics needs to be wider than the traditional (mainstream focus. System inefficiencies as well as specific non-traditional areas need to be explored, e.g. the integration of rural and small businesses, government service delivery, sector cooperation, and emergency logistics. This article provides a brief overview of the current state of logistics in the country and the government’s response in terms of the National Freight Logistics Strategy. Research needs, research priorities and the role of research organisations are discussed.

Performance Based Logistics - A Bridge Between Acquisition Reform and Logistics Supply Chain Management

National Research Council Canada - National Science Library

Hurst, Dana

2006-01-01

.... Performance based logistics links acquisition and supply chain management in the Total Life Cycle Systems Management and thus may provide the opportunity for true reform resulting in increased...

Knowledge Integrated Business Process Management for Third Party Logistics Companies

OpenAIRE

Zhang, Hongyan

2013-01-01

The growing importance of logistics as well as the increasing dynamic complexity of markets, technologies, and customer needs has brought great challenges to logistics. In order to focus on their core competency in such a competitive environment, more and more companies have outsourced a part or the entirety of the logistics process to third party logistics (3PL) service providers. 3PL has played a crucial role in managing logistics processes within supply chain management. Logistics processe...

Logistics and Transport - a conceptual model

DEFF Research Database (Denmark)

Jespersen, Per Homann; Drewes, Lise

2004-01-01

This paper describes how the freight transport sector is influenced by logistical principles of production and distribution. It introduces new ways of understanding freight transport as an integrated part of the changing trends of mobility. By introducing a conceptual model for understanding...... the interaction between logistics and transport, it points at ways to over-come inherent methodological difficulties when studying this relation...

Automation, Performance and International Competition

DEFF Research Database (Denmark)

Kromann, Lene; Sørensen, Anders

This paper presents new evidence on trade‐induced automation in manufacturing firms using unique data combining a retrospective survey that we have assembled with register data for 2005‐2010. In particular, we establish a causal effect where firms that have specialized in product types for which...... the Chinese exports to the world market has risen sharply invest more in automated capital compared to firms that have specialized in other product types. We also study the relationship between automation and firm performance and find that firms with high increases in scale and scope of automation have faster...... productivity growth than other firms. Moreover, automation improves the efficiency of all stages of the production process by reducing setup time, run time, and inspection time and increasing uptime and quantity produced per worker. The efficiency improvement varies by type of automation....

Optimalization of logistic costs by the controlling approach

Directory of Open Access Journals (Sweden)

Katarína Teplická

2007-10-01

Full Text Available Article deals with logistic cost problems, their following, reporting and evaluation in the firm. It gives basic information about possible access of the effective decreasing of the logistic cost by the way of controlling access, or evaluation of Balance Score Card. It indicates short algorithm of logistic costs reporting by the way of controlling.

Systematic review automation technologies

Science.gov (United States)

2014-01-01

Systematic reviews, a cornerstone of evidence-based medicine, are not produced quickly enough to support clinical practice. The cost of production, availability of the requisite expertise and timeliness are often quoted as major contributors for the delay. This detailed survey of the state of the art of information systems designed to support or automate individual tasks in the systematic review, and in particular systematic reviews of randomized controlled clinical trials, reveals trends that see the convergence of several parallel research projects. We surveyed literature describing informatics systems that support or automate the processes of systematic review or each of the tasks of the systematic review. Several projects focus on automating, simplifying and/or streamlining specific tasks of the systematic review. Some tasks are already fully automated while others are still largely manual. In this review, we describe each task and the effect that its automation would have on the entire systematic review process, summarize the existing information system support for each task, and highlight where further research is needed for realizing automation for the task. Integration of the systems that automate systematic review tasks may lead to a revised systematic review workflow. We envisage the optimized workflow will lead to system in which each systematic review is described as a computer program that automatically retrieves relevant trials, appraises them, extracts and synthesizes data, evaluates the risk of bias, performs meta-analysis calculations, and produces a report in real time. PMID:25005128

Logistics background study: underground mining

Energy Technology Data Exchange (ETDEWEB)

Hanslovan, J. J.; Visovsky, R. G.

1982-02-01

Logistical functions that are normally associated with US underground coal mining are investigated and analyzed. These functions imply all activities and services that support the producing sections of the mine. The report provides a better understanding of how these functions impact coal production in terms of time, cost, and safety. Major underground logistics activities are analyzed and include: transportation and personnel, supplies and equipment; transportation of coal and rock; electrical distribution and communications systems; water handling; hydraulics; and ventilation systems. Recommended areas for future research are identified and prioritized.

Logistics require savvy negotiation, patience

International Nuclear Information System (INIS)

Talboy, R.G.

1991-01-01

In the Soviet Union, logistics are affected by the extraordinary political, social and physical environment, so that operations are virtually all art, rather than science. Furthermore, this art, as it applies to a particular project, probably does not lend itself to broad generalizations about what would work somewhere else. Each project will have its own idiosyncrasies, depending on its type and location in the vast Soviet republics, and upon the personalities involved. This article discusses only the logistics that worked out and are still evolving for the project with which the author was associated

A q-deformed logistic map and its implications

International Nuclear Information System (INIS)

Banerjee, Subhashish; Parthasarathy, R

2011-01-01

A new q-deformed logistic map is proposed and it is found to have concavity in parts of the x-space. Its one-cycle and two-cycle non-trivial fixed points are obtained which are found to be qualitatively and quantitatively different from those of the usual logistic map. The stability of the proposed q-logistic map is studied using the Lyapunov exponent, and with a change in the value of the deformation parameter q, one is able to go from the chaotic to regular dynamical regime. The implications of this q-logistic map on Parrondo's paradox are examined.

Information Support of Processes in Warehouse Logistics

Directory of Open Access Journals (Sweden)

Gordei Kirill

2013-11-01

Full Text Available In the conditions of globalization and the world economic communications, the role of information support of business processes increases in various branches and fields of activity. There is not an exception for the warehouse activity. Such information support is realized in warehouse logistic systems. In relation to territorial administratively education, the warehouse logistic system gets a format of difficult social and economic structure which controls the economic streams covering the intermediary, trade and transport organizations and the enterprises of other branches and spheres. Spatial movement of inventory items makes new demands to participants of merchandising. Warehousing (in the meaning – storage – is one of the operations entering into logistic activity, on the organization of a material stream, as a requirement. Therefore, warehousing as "management of spatial movement of stocks" – is justified. Warehousing, in such understanding, tries to get rid of the perception as to containing stocks – a business expensive. This aspiration finds reflection in the logistic systems working by the principle: "just in time", "economical production" and others. Therefore, the role of warehouses as places of storage is transformed to understanding of warehousing as an innovative logistic system.

The transport performance evaluation system building of logistics enterprises

Directory of Open Access Journals (Sweden)

Xueli Wang

2013-09-01

Full Text Available Purpose: modern logistics has a significant role in today’s society, logistics cost accounts for 35% to 50% of total logistics costs, so it’s great significance to improve the transport performance of logistics enterprises. Design/methodology/approach: the authors select the transportation performance evaluation index of logistics enterprise, with the aid of the fuzzy theory and analytic hierarchy process (AHP, adopt the combining method of quantitative and qualitative analysis, construct the transport performance evaluation system of logistics enterprises. Findings: the choice of transport performance evaluation indicator system for Logistics enterprise is in a state of "high", which indicates the indicator selection is reasonable. Research limitations/implications: the selected indicators with experts’ subjective factors can not accurately quantify. Practical implications: it has important practical significance to promote the development of modern logistics enterprises and save social cost. Originality/value: current research methods mainly include the PDCA cycle model, key performance indicators (KPI and benchmarking method, principal component analysis method, etc. The authors for the first time with the aid of fuzzy theory and analytic hierarchy process (AHP, adopt the combining method of quantitative and qualitative research on transport performance problems.

RISK MANAGEMENT AND RISK COMMUNICATION IN MOZAMBIQUE: THE CASE OF ARMS AND AMMUNITION DEPOTS OF MALHAZINE

Directory of Open Access Journals (Sweden)

Luca Bussotti

2017-12-01

Full Text Available Risk management and risk communication affect everybody’s daily life. Local authorities have the duty to manage public structures, to inform civilians of the risks coming from these structures, to implement prophylaxis procedures. Military storage sites are fully included in this category. This article presents – through a qualitative methodology based on risk analysis – how risk management and communication in weapons and ammunition warehouses is managed in a “partially free” country, using as a case-study, the Malhazine depot in Mozambique, which resulted in more than 100 deaths. In 2007, an extraordinary accident related to the management of obsolete conventional weapons occurred at the Malazhine warehouse. In this circumstance, the Mozambican Government adopted a policy of classifying the information “highly confidential”. This policy aimed at obscuring facts and responsibilities by hiding the causes of such a huge tragedy. This article concludes with the consideration that a high level of confidentiality in treating issues of public interest, such as the one kept in regard to Malhazine, does not help public authorities to effectively manage and prevent similar risks from occurring again, with resulting negative impacts on local populations.

Environmental logistics performance indicators affecting per capita income and sectoral growth: evidence from a panel of selected global ranked logistics countries.

Science.gov (United States)

Khan, Syed Abdul Rehman; Qianli, Dong; SongBo, Wei; Zaman, Khalid; Zhang, Yu

2017-01-01

The objective of the study is to examine the long-run and causal relationship between environmental logistics performance indicators (ELPI) and growth-specific factors in a panel of 15 selected global ranked logistics countries over a period of 2007-2015. This study is exclusive as we utilized a number of LPI factors including logistics performance, logistics competence, and logistics infrastructure with mediation of sustainable factors, i.e., carbon dioxide (CO 2 ), fossil fuel, and greenhouse gas (GHG) emissions in a region. The results show that the per capita income, industry, manufacturing, and service share to GDP is affected by CO 2 emissions and GHG emissions. Logistics competence and infrastructure promote economic growth and sectoral value added, while energy demand and FDI inflows both are prerequisite for sustainable agriculture in a region. The causal relationships confirm that more energy demand results in an increase in economic growth, industry value added, and the service sector (i.e., feedback hypothesis), while the sustainable supply chain system improves energy demand, FDI inflows, economic growth, and sectoral growth (i.e., conservation hypothesis) in a panel of countries.

AN OVERVIEW ON RETAIL REVERSE LOGISTICS

Directory of Open Access Journals (Sweden)

Ioana Olariu

2014-07-01

Full Text Available This article is a theoretical approach on retail reverse logistics. Environmental concern and the current marketing strategy have spurred retailers to implement strategies to facilitate product returns from end customers. Reverse logistics, indicating the process of this return flow, encompasses such activities as the movement of returned products, facilities to accommodate returned items, and overall remedy process for returned items. The retail industry, under great competitive pressure, has used return policies as a competitive weapon. Grocery retailers were the first to begin to focus serious attention on the problem of returns and to develop reverse logistics innovations. Grocery retailers first developed innovations such as reclamation centers. Reclamation centers, in turn, led to the establishment of centralized return centers. Centralizing returns has led to significant benefits for most firms that have implemented them. Over the last several years, retailers have consolidated. Now, more than ever, reverse logistics is seen as being important. This reverse distribution activity can be crucial to the survival of companies, because the permanent goodwill of the company is at stake. Businesses succeed because they respond to both external and internal changes and adjust in an effective manner to remain competitive.

Comparing the Discrete and Continuous Logistic Models

Science.gov (United States)

Gordon, Sheldon P.

2008-01-01

The solutions of the discrete logistic growth model based on a difference equation and the continuous logistic growth model based on a differential equation are compared and contrasted. The investigation is conducted using a dynamic interactive spreadsheet. (Contains 5 figures.)

A common language for logistics services interoperability

NARCIS (Netherlands)

Gonzalez-Rodriguez, M.; Vennesland, A.; Dalmolen, Simon

2015-01-01

Transport logistics is immersed in a world-wide changing process. The fluctuating market necessities, the distribution of production facilities, the influence of the emerging economies and the environmental compromise force transport logistics services to be as dynamic as possible, answering to

The Automation-by-Expertise-by-Training Interaction.

Science.gov (United States)

Strauch, Barry

2017-03-01

I introduce the automation-by-expertise-by-training interaction in automated systems and discuss its influence on operator performance. Transportation accidents that, across a 30-year interval demonstrated identical automation-related operator errors, suggest a need to reexamine traditional views of automation. I review accident investigation reports, regulator studies, and literature on human computer interaction, expertise, and training and discuss how failing to attend to the interaction of automation, expertise level, and training has enabled operators to commit identical automation-related errors. Automated systems continue to provide capabilities exceeding operators' need for effective system operation and provide interfaces that can hinder, rather than enhance, operator automation-related situation awareness. Because of limitations in time and resources, training programs do not provide operators the expertise needed to effectively operate these automated systems, requiring them to obtain the expertise ad hoc during system operations. As a result, many do not acquire necessary automation-related system expertise. Integrating automation with expected operator expertise levels, and within training programs that provide operators the necessary automation expertise, can reduce opportunities for automation-related operator errors. Research to address the automation-by-expertise-by-training interaction is needed. However, such research must meet challenges inherent to examining realistic sociotechnical system automation features with representative samples of operators, perhaps by using observational and ethnographic research. Research in this domain should improve the integration of design and training and, it is hoped, enhance operator performance.

Distribution automation

International Nuclear Information System (INIS)

Gruenemeyer, D.

1991-01-01

This paper reports on a Distribution Automation (DA) System enhances the efficiency and productivity of a utility. It also provides intangible benefits such as improved public image and market advantages. A utility should evaluate the benefits and costs of such a system before committing funds. The expenditure for distribution automation is economical when justified by the deferral of a capacity increase, a decrease in peak power demand, or a reduction in O and M requirements

FEATURES OF LOGISTIC SYSTEM ADAPTIVE MANAGEMENT

Directory of Open Access Journals (Sweden)

Natalya VOZNENKO

2015-08-01

Full Text Available The study presents literature survey on enterprise logistic system adaptive management place and structure in the general enterprise management system. The theoretical basics of logistic system functioning, levels of its management and its effectiveness had been investigated. The role of adaptive management and its types had been scrutinized. The necessity of creating company’s adaptive regulator such as its economic mechanism had been proved.

Understanding human management of automation errors

Science.gov (United States)

McBride, Sara E.; Rogers, Wendy A.; Fisk, Arthur D.

2013-01-01

Automation has the potential to aid humans with a diverse set of tasks and support overall system performance. Automated systems are not always reliable, and when automation errs, humans must engage in error management, which is the process of detecting, understanding, and correcting errors. However, this process of error management in the context of human-automation interaction is not well understood. Therefore, we conducted a systematic review of the variables that contribute to error management. We examined relevant research in human-automation interaction and human error to identify critical automation, person, task, and emergent variables. We propose a framework for management of automation errors to incorporate and build upon previous models. Further, our analysis highlights variables that may be addressed through design and training to positively influence error management. Additional efforts to understand the error management process will contribute to automation designed and implemented to support safe and effective system performance. PMID:25383042

Provincial logistics capability and economic development in South Africa

CSIR Research Space (South Africa)

Mashoko, L

2013-07-01

Full Text Available The study involves the determination of Provincial Logistics Capability for South African provinces. Provincial Logistic Capability (PLC) is the effectiveness and efficiency of a province in facilitating logistics activities both within the province...

Activities and Education in Logistics

Directory of Open Access Journals (Sweden)

Jasmina Pašagić Škrinjar

2008-03-01

Full Text Available Logistic approach to traffic means new business policy,economy and ownership, new internal organization, externaland internal communication, different corporate cultures, humanresources management using scientific methods, trainingand education, changed management type and awarding system,knowledge of information technology, communicationskills, electronic commerce, etc. Education is part of all theseelements. The introduction of logistics in all the business activitieshas been imposed due to the following reasons: because ofthe life-cycle shortening of the product and its delivery, becauseof sudden technological development, because of productionand market globalization, because of the increase in competitiveness.This paper describes first various logistic activities with theindication of practical and scientific approaches. The logisticsapproach in the traffic activities requires upgrading of the professionaland scientific level to a higher one which means additionaltraining and acquiring of new skills as well as new technologiesfor the employees.The basic aim of research was to specifY the basic logisticsactivities and problems in order to indicate the need of differentforms of education. Fast technological and social changes requireconstant improvement and modification of professionalknowledge and acqui1ing of new scientific methods and skills.

Proximity matters : synergies through co-location of logistics establishments

OpenAIRE

Heuvel, van den, F.P.; Langen, de, P.W.; Donselaar, van, K.H.; Fransoo, J.C.

2012-01-01

Although anecdotic evidence suggests that co-location of logistics activities can bring several benefits to the co-located logistics companies and hence, can be important to incorporate in the location decisions of these companies, this is the first paper to empirically research these benefits. This paper contributes to the understanding of spatial concentration of logistics firms by empirically analyzing synergies through co-location and investigates whether spatial concentration of logistic...

Robust mislabel logistic regression without modeling mislabel probabilities.

Science.gov (United States)

Hung, Hung; Jou, Zhi-Yu; Huang, Su-Yun

2018-03-01

Logistic regression is among the most widely used statistical methods for linear discriminant analysis. In many applications, we only observe possibly mislabeled responses. Fitting a conventional logistic regression can then lead to biased estimation. One common resolution is to fit a mislabel logistic regression model, which takes into consideration of mislabeled responses. Another common method is to adopt a robust M-estimation by down-weighting suspected instances. In this work, we propose a new robust mislabel logistic regression based on γ-divergence. Our proposal possesses two advantageous features: (1) It does not need to model the mislabel probabilities. (2) The minimum γ-divergence estimation leads to a weighted estimating equation without the need to include any bias correction term, that is, it is automatically bias-corrected. These features make the proposed γ-logistic regression more robust in model fitting and more intuitive for model interpretation through a simple weighting scheme. Our method is also easy to implement, and two types of algorithms are included. Simulation studies and the Pima data application are presented to demonstrate the performance of γ-logistic regression. © 2017, The International Biometric Society.

Exploring logistics aspects of flood emergency measures

NARCIS (Netherlands)

de Leeuw, S.L.J.M.; Vis, I.F.A.; Jonkman, S.N.

2012-01-01

Floods are often preceded by warnings such as heavy rain that may make preparatory activities possible in order to prevent flooding from actually happening. However, flood emergency preparedness lacks insight in logistical aspects. This paper develops a framework of logistical aspects of emergency

Exploring Logistics Aspects of Flood Emergency Measures

NARCIS (Netherlands)

de Leeuw, Sander; Vis, Iris F. A.; Jonkman, Sebastiaan N.

Floods are often preceded by warnings such as heavy rain that may make preparatory activities possible in order to prevent flooding from actually happening. However, flood emergency preparedness lacks insight in logistical aspects. This paper develops a framework of logistical aspects of emergency

Assessment of laboratory logistics management information system ...

African Journals Online (AJOL)

Introduction: Logistics management information system for health commodities remained poorly implemented in most of developing countries. To assess the status of laboratory logistics management information system for HIV/AIDS and tuberculosis laboratory commodities in public health facilities in Addis Ababa. Methods: ...

Smart trade logistics - Compliance as an opportunity

NARCIS (Netherlands)

Zomer, G.R.

2011-01-01

Facilitation of trade logistics aims at simplification and harmonization of border procedures and related documentation. This is an accelerator for global trade and economic growth and therefore a priority in global trade policy. Trends in logistics and supply chain security and innovations in

State of logistics - a five-year review

CSIR Research Space (South Africa)

Ittmann, HW

2009-07-01

Full Text Available The state of logistics survey makes it possible to analyse and show trends over the past five years. This relates to quantitative and qualitative logistics issues that were not possible when this survey started in 2004. The paper will show...

Human-centred automation: an explorative study

International Nuclear Information System (INIS)

Hollnagel, Erik; Miberg, Ann Britt

1999-05-01

The purpose of the programme activity on human-centred automation at the HRP is to develop knowledge (in the form of models and theories) and tools (in the form of techniques and simulators) to support design of automation that ensures effective human performance and comprehension. This report presents the work done on both the analytical and experimental side of this project. The analytical work has surveyed common definitions of automation and traditional design principles. A general finding is that human-centred automation usually is defined in terms of what it is not. This is partly due to a lack of adequate models and of human-automation interaction. Another result is a clarification of the consequences of automation, in particular with regard to situation awareness and workload. The experimental work has taken place as an explorative experiment in HAMMLAB in collaboration with IPSN (France). The purpose of this experiment was to increase the understanding of how automation influences operator performance in NPP control rooms. Two different types of automation (extensive and limited) were considered in scenarios having two different degrees of complexity (high and low), and involving diagnostic and procedural tasks. Six licensed NPP crews from the NPP at Loviisa, Finland, participated in the experiment. The dependent variables applied were plant performance, operator performance, self-rated crew performance, situation awareness, workload, and operator trust in the automation. The results from the diagnostic scenarios indicated that operators' judgement of crew efficiency was related to their level of trust in the automation, and further that operators trusted automation least and rated crew performance lowest in situations where crew performance was efficient and vice versa. The results from procedural scenarios indicated that extensive automation efficiently supported operators' performance, and further that operator' judgement of crew performance efficiency

Configuration Management Automation (CMA) -

Data.gov (United States)

Department of Transportation — Configuration Management Automation (CMA) will provide an automated, integrated enterprise solution to support CM of FAA NAS and Non-NAS assets and investments. CMA...

Paradoxes and Opportunities in Logistic Outsourcing Research

Directory of Open Access Journals (Sweden)

Đurđica Stojanović

2012-11-01

Full Text Available Historically, very few logistic trends have caught the attention of academics and practitioners to the same extent as outsourcing. A comprehensive literature review reveals two reasons for this continual topicality. The problem complexity and the business environment dynamics – including an interaction with other main trends in logistics and modern supply chains – both led to a permanent literature gap, indicating the need to explore some new aspects of logistics outsourcing (LO. In this paper, a new LO research perspective has been explored by identifying some weaknesses in the main LO research streams and related common viewpoints which led to six ‘logistics outsourcing research paradoxes’. Each of these paradoxes is briefly described and their links with research streams and common views on LO discussed. Finally, the nature of some known opportunities for further research is better explained and some overlooked research opportunities are highlighted.

Toward designing for trust in database automation

Energy Technology Data Exchange (ETDEWEB)

Duez, P. P.; Jamieson, G. A. [Cognitive Engineering Laboratory, Univ. of Toronto, 5 King' s College Rd., Toronto, Ont. M5S 3G8 (Canada)

2006-07-01

Appropriate reliance on system automation is imperative for safe and productive work, especially in safety-critical systems. It is unsafe to rely on automation beyond its designed use; conversely, it can be both unproductive and unsafe to manually perform tasks that are better relegated to automated tools. Operator trust in automated tools mediates reliance, and trust appears to affect how operators use technology. As automated agents become more complex, the question of trust in automation is increasingly important. In order to achieve proper use of automation, we must engender an appropriate degree of trust that is sensitive to changes in operating functions and context. In this paper, we present research concerning trust in automation in the domain of automated tools for relational databases. Lee and See have provided models of trust in automation. One model developed by Lee and See identifies three key categories of information about the automation that lie along a continuum of attributional abstraction. Purpose-, process-and performance-related information serve, both individually and through inferences between them, to describe automation in such a way as to engender r properly-calibrated trust. Thus, one can look at information from different levels of attributional abstraction as a general requirements analysis for information key to appropriate trust in automation. The model of information necessary to engender appropriate trust in automation [1] is a general one. Although it describes categories of information, it does not provide insight on how to determine the specific information elements required for a given automated tool. We have applied the Abstraction Hierarchy (AH) to this problem in the domain of relational databases. The AH serves as a formal description of the automation at several levels of abstraction, ranging from a very abstract purpose-oriented description to a more concrete description of the resources involved in the automated process