WorldWideScience

Sample records for attaching refractory metals

  1. Spinning of refractory metals

    International Nuclear Information System (INIS)

    Chang Wenkua; Zheng Han

    1989-01-01

    The effects of spinning process parameters including max. pass percentage reduction, spinning temperature, feed rate, lubricant and annealing technology on the quality of shaped components are summarized and discussed in the present paper. The above mentioned parameters are adopted in the process of spinning of barrel-shaped and specially shaped components of refractory metals and their alloys W, Mo, Nb, Zr, TZM molybdenum alloy, C-103, C-752 niobium alloy etc. The cause of leading to usual defects of spun products of refractory metals such as lamellar as 'scaling', crack, swelling, wrinkle, etc. have been analysed and the ways to eliminate the defects have been put forward. 8 figs., 5 tabs. (Author)

  2. Refractory metal based superalloys

    International Nuclear Information System (INIS)

    Alonso, Paula R.; Vicente, Eduardo E.; Rubiolo, Gerardo H.

    1999-01-01

    Refractory metals are looked as promising materials for primary circuits in fission reactors and even as fusion reactor components. Indeed, superalloys could be developed which take advantage of their high temperature properties together with the benefits of a two- phase (intermetallic compound-refractory metal matrix) coherent structure. In 1993, researchers of the Office National d'Etudes et de Recherches Aerospatiales of France reported the observation of such a coherent structure in the Ta-Ti-Zr-Al-Nb-Mo system although the exact composition is not reported. The intermetallic compound would be Ti 2 AlMo based. However, the formation of this compound and its possible coexistence with a disordered bcc phase in the ternary system Ti-Al-Mo is a controversial subject in the related literature. In this work we develop a technique to obtain homogeneous alloys samples with 50 Ti-25 Al-25 Mo composition. The resulting specimens were characterized by optical and electronic metallography (SEM), microprobe composition measurements (EPMA) and X-ray diffraction (XRD) analyses. The results show the evidence for a bcc (A2→B2) ordering reaction in the Ti-Al-Mo system in the 50 Ti-25 Al-25 Mo composition. (author)

  3. Carbothermic reduction of refractory metals

    International Nuclear Information System (INIS)

    Anderson, R.N.; Parlee, N.A.D.

    1976-01-01

    The reduction of stable refractory metal oxides by carbon is generally unacceptable since the product is usually contaminated with carbides. The carbide formation may be avoided by selecting a solvent metal to dissolve the reactive metal as it is produced and reduce its chemical activity below that required for carbide formation. This approach has been successfully applied to the oxides of Si, Zr, Ti, Al, Mg, and U. In the case where a volatile suboxide, a carbonyl reaction, or a volatile metal occur, the use of the solvent metal appears satisfactory to limit the loss of material at low pressures. In several solute--solvent systems, vacuum evaporation is used to strip the solvent metal from the alloy to give the pure metal

  4. Tungsten and refractory metals 3, proceedings

    International Nuclear Information System (INIS)

    Bose, A.; Dowding, R.J.

    1996-01-01

    The Third International Conference on Tungsten and Refractory Metals was held in Greater Washington DC at the McLean Hilton, McLean Virginia, on November 15--16, 1995. This meeting was the third in a series of conferences held in the Washington DC area. The first meeting was in 1992 and was entitled ''International Conference on Tungsten and Tungsten Alloys.'' In 1994, the scope of the meeting was expanded to include other refractory metals such as molybdenum, iridium, rhenium, tantalum and niobium. The tremendous success of that meeting was the primary motivation for this Conference. The broader scope (the inclusion of other refractory metals and alloys) of the Conference was kept intact for this meeting. In fact, it was felt that the developments in the technology of these materials required a common forum for the interchange of current research information. The papers presented in this meeting examined the rapid advancements in the technology of refractory metals, with special emphasis on the processing, structure, and properties. Among the properties there was emphasis on both quasi-static and dynamic rates. Another topic that received considerable interest was the area of refractory carbides and tungsten-copper composites. One day of concurrent session was necessary to accommodate all of the presentations

  5. Powder metallurgy of refractory metals

    International Nuclear Information System (INIS)

    Eck, R.

    1979-01-01

    This paper reports on the powder metallurgical methods for the production of high-melting materials, such as pure metals and their alloys, compound materials with a tungsten base and hard metals from liquid phase sintered carbides. (author)

  6. Refractory metal particles in refractory inclusions in the Allende meteorite

    International Nuclear Information System (INIS)

    Fuchs, L.H.; Blander, M.

    1980-01-01

    An examination of refractory metal particles in five calcium-aluminum-rich inclusions in the Allende meteorite indicates a complex variety of compositions and large departures from equilibrium. These particles appear to have been primordial condensates which were isolated from the nebula and from each other at different times by cocondensing oxides. Selective diffusion and/or oxidation of the more oxidizable metals (Mo, W, Fe and Ni), phase segregations into different alloy phases (fcc, bcc, hcp and perhaps ordered phases) and the formation of metastable condensates appears to have been involved in the modification of these materials to their present state. Only a small fraction of our observations cannot be reconciled with this picture because of a lack of knowledge of some of the phase equilibria which might have bee involved

  7. Alkali metal-refractory metal biphase electrode for AMTEC

    Science.gov (United States)

    Williams, Roger M. (Inventor); Bankston, Clyde P. (Inventor); Cole, Terry (Inventor); Khanna, Satish K. (Inventor); Jeffries-Nakamura, Barbara (Inventor); Wheeler, Bob L. (Inventor)

    1989-01-01

    An electrode having increased output with slower degradation is formed of a film applied to a beta-alumina solid electrolyte (BASE). The film comprises a refractory first metal M.sup.1 such as a platinum group metal, suitably platinum or rhodium, capable of forming a liquid or a strong surface adsorption phase with sodium at the operating temperature of an alkali metal thermoelectric converter (AMTEC) and a second refractory metal insoluble in sodium or the NaM.sup.1 liquid phase such as a Group IVB, VB or VIB metal, suitably tungsten, molybdenum, tantalum or niobium. The liquid phase or surface film provides fast transport through the electrode while the insoluble refractory metal provides a structural matrix for the electrode during operation. A trilayer structure that is stable and not subject to deadhesion comprises a first, thin layer of tungsten, an intermediate co-deposited layer of tungsten-platinum and a thin surface layer of platinum.

  8. Process technology - rare and refractory metals

    International Nuclear Information System (INIS)

    Gupta, C.K.; Bose, D.K.

    1989-01-01

    India has fairly rich resreves of rare and refractory metals. Abundant sources of ilmenite, rutile, zircon and rare earths are found in the placer deposits of the southern and eastern coasts of the country. Columbite-tantalite occur in mica and the mining belts of Bihar and cassiterite deposits are found in Bastar (Madhya Pradesh). Vanadium as a minor associate occurs in bauxites and in the vast deposits of titaniferrous magnetites. Over the years, research and development and pilot plant works in many research organisations in India have built up a sound technological base in the country for process metallurgy of many refractory and rare earth metals starting from their indigenous sources. The present paper provides a comprehensive view of the developments that have taken place till now on the processing of various refractory and rare earth metals with particular reference to the extensive work carried out at the Department of Atomic Energy. The coverage includes mineral benification separation of individual elements, preparation of pure intermediates, techniques of reduction to metal and final purification. The paper also reviews some of the recent developments that have been taken place in these fields and the potential application of these metals in the foreseeable future. (author). 22 refs., 18 fi g., 7 tabs

  9. Barrier Coatings for Refractory Metals and Superalloys

    International Nuclear Information System (INIS)

    SM Sabol; BT Randall; JD Edington; CJ Larkin; BJ Close

    2006-01-01

    In the closed working fluid loop of the proposed Prometheus space nuclear power plant (SNPP), there is the potential for reaction of core and plant structural materials with gas phase impurities and gas phase transport of interstitial elements between superalloy and refractory metal alloy components during service. Primary concerns are surface oxidation, interstitial embrittlement of refractory metals and decarburization of superalloys. In parallel with kinetic investigations, this letter evaluates the ability of potential coatings to prevent or impede communication between reactor and plant components. Key coating requirements are identified and current technology coating materials are reviewed relative to these requirements. Candidate coatings are identified for future evaluation based on current knowledge of design parameters and anticipated environment. Coatings were identified for superalloys and refractory metals to provide diffusion barriers to interstitial transport and act as reactive barriers to potential oxidation. Due to their high stability at low oxygen potential, alumina formers are most promising for oxidation protection given the anticipated coolant gas chemistry. A sublayer of iridium is recommended to provide inherent diffusion resistance to interstitials. Based on specific base metal selection, a thin film substrate--coating interdiffusion barrier layer may be necessary to meet mission life

  10. Barrier Coatings for Refractory Metals and Superalloys

    Energy Technology Data Exchange (ETDEWEB)

    SM Sabol; BT Randall; JD Edington; CJ Larkin; BJ Close

    2006-02-23

    In the closed working fluid loop of the proposed Prometheus space nuclear power plant (SNPP), there is the potential for reaction of core and plant structural materials with gas phase impurities and gas phase transport of interstitial elements between superalloy and refractory metal alloy components during service. Primary concerns are surface oxidation, interstitial embrittlement of refractory metals and decarburization of superalloys. In parallel with kinetic investigations, this letter evaluates the ability of potential coatings to prevent or impede communication between reactor and plant components. Key coating requirements are identified and current technology coating materials are reviewed relative to these requirements. Candidate coatings are identified for future evaluation based on current knowledge of design parameters and anticipated environment. Coatings were identified for superalloys and refractory metals to provide diffusion barriers to interstitial transport and act as reactive barriers to potential oxidation. Due to their high stability at low oxygen potential, alumina formers are most promising for oxidation protection given the anticipated coolant gas chemistry. A sublayer of iridium is recommended to provide inherent diffusion resistance to interstitials. Based on specific base metal selection, a thin film substrate--coating interdiffusion barrier layer may be necessary to meet mission life.

  11. Perspectives on environmental protection of refractory metals

    International Nuclear Information System (INIS)

    Perking, R.A.

    1992-01-01

    Alloys of refractory metals which combine high strength to weight ratios with useful low-temperature toughness and ductility have been designed to meet the requirements for the next generation of high-temperature aerospace structural materials with one exception: long term resistance to oxidation. It is considered unlikely that refractory metal alloys can be modified to possess useful resistance to oxidation as bulk materials or that coating can be designed to provide high reliability fail-safe protection for the structural alloys developed to date. Recent developments indicate that bulk alloys of W and Mo can be designed to possess short term resistance to oxidation, providing a base material which can be coated to extend useful life with fail-safe protection in the event of random coating failures. Current research on silicide coatings indicates that significant improvements in coating reliability and performance also are feasible. The technical basis for these conclusions is presented in this paper and the direction of future work that could lead to environmentally stable refractory metal alloy/coating systems is discussed

  12. Directed light fabrication of refractory metals

    International Nuclear Information System (INIS)

    Lewis, G.K.; Thoma, D.J.; Nemec, R.B.; Milewski, J.O.

    1997-01-01

    Directed Light Fabrication (DLF) is a metal, rapid fabrication process that fuses metal powders to full density into a solid replica of a computer modeled component. It has been shown feasible for forming nearly any metal and also intermetallics to near net shape with a single process. DLF of refractory pure metals is feasible, bypassing the extensive series of conventional processing steps used for processing these high melting point materials. Tungsten, tantalum, and rhenium were processed and show a continuous resolidified microstructure. Porosity was a problem for the tantalum and rhenium powders produced by chemical reduction processes but not for the tungsten powder spherodized in a plasma arc. Chemical analysis of powder compared to the DLF deposit showed reductions in carbon, oxygen and hydrogen, indicating that process parameters may also be optimized for evolution of residual gases in the deposits

  13. Plasma spraying of refractory metals and refractory hard materials. State of the art

    International Nuclear Information System (INIS)

    Eschnauer, H.; Lugscheider, E.; Jaeger, D.

    1989-01-01

    Suitable spraying processes for manufacturing refractory metals, refractory hard materials as well as spray materials with refractory components are the VPS- and IPS-spraying techniques. The advantages of these special spraying process variations are described. The reactive spraying materials are systematically organized. The characteristical properties used in purpose of improving the substrate surfaces are explained. Finally some examples of the latest results of research concerning plasma spraying of reactive materials are shown. 16 refs., 10 figs. (Author)

  14. Refractory metal joining for first wall applications

    Science.gov (United States)

    Cadden, C. H.; Odegard, B. C.

    2000-12-01

    The potential use of high temperature coolant (e.g. 900°C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000°C to 1275°C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

  15. Refractory metal joining for first wall applications

    International Nuclear Information System (INIS)

    Cadden, C.H.; Odegard, B.C.

    2000-01-01

    The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking

  16. Refractory metal joining for first wall applications

    Energy Technology Data Exchange (ETDEWEB)

    Cadden, C.H. E-mail: chcadde@sandia.gov; Odegard, B.C

    2000-12-01

    The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

  17. Refractory thermowell for continuous high temperature measurement of molten metal

    International Nuclear Information System (INIS)

    Thiesen, T.J.

    1992-01-01

    This patent describes a vessel for handling molten metal having an interior refractory lining, apparatus for continuous high temperature measurement of the molten metal. It comprises a thermowell; the thermowell containing a multiplicity of thermocouples; leads being coupled to a means for continuously indicating the temperature of the molten metal in the vessel

  18. Laboratory studies of refractory metal oxide smokes

    International Nuclear Information System (INIS)

    Nuth, J.A.; Nelson, R.N.; Donn, B.

    1989-01-01

    Studies of the properties of refractory metal oxide smokes condensed from a gas containing various combinations of SiH4, Fe(CO)5, Al(CH3)3, TiCl4, O2 and N2O in a hydrogen carrier stream at 500 K greater than T greater than 1500 K were performed. Ultraviolet, visible and infrared spectra of pure, amorphous SiO(x), FeO(x), AlO(x) and TiO(x) smokes are discussed, as well as the spectra of various co-condensed amorphous oxides, such as FE(x)SiO(y) or Fe(x)AlO(y). Preliminary studies of the changes induced in the infrared spectra of iron-containing oxide smokes by vacuum thermal annealing suggest that such materials become increasingly opaque in the near infrared with increased processing: hydration may have the opposite effect. More work on the processing of these materials is required to confirm such a trend: this work is currently in progress. Preliminary studies of the ultraviolet spectra of amorphous Si2O3 and MgSiO(x) smokes revealed no interesting features in the region from 200 to 300 nm. Studies of the ultraviolet spectra of both amorphous, hydrated and annealed SiO(x), TiO(x), AlO(x) and FeO(x) smokes are currently in progress. Finally, data on the oxygen isotopic composition of the smokes produced in the experiments are presented, which indicate that the oxygen becomes isotopically fractionated during grain condensation. Oxygen in the grains is as much as 3 percent per amu lighter than the oxygen in the original gas stream. The authors are currently conducting experiments to understand the mechanism by which fractionation occurs

  19. Directed light fabrication of refractory metals and alloys

    International Nuclear Information System (INIS)

    Fonseca, J.C.; Lewis, G.K.; Dickerson, P.G.; Nemec, R.B.

    1999-01-01

    This report covers deposition of refractory pure metals and alloys using the Directed Light Fabrication (DLF) process and represents progress in depositing these materials through September 1998. In extending the DLF process technology to refractory metals for producing fully dense, structurally sound deposits, several problems have become evident. (1) Control of porosity in DLF-deposited refractory metal is difficult because of gases, apparently present in commercially purchased refractory metal powder starting materials. (2) The radiant heat from the molten pool during deposition melts the DLF powder feed nozzle. (3) The high reflectivity of molten refractory metals, at the Nd-YAG laser wavelength (1.06microm), produces damaging back reflections to the optical train and fiber optic delivery system that can terminate DLF processing. (4) The current limits on the maximum available laser power to prevent back reflection damage limit the parameter range available for densification of refractory metals. The work to date concentrated on niobium, W-25Re, and spherodized tungsten. Niobium samples, made from hydride-dehydride powder, had minimal gas porosity and the deposition parameters were optimized; however, test plates were not made at this time. W-25Re samples, containing sodium and potassium from a precipitation process, were made and porosity was a problem for all samples although minimized with some process parameters. Deposits made from potassium reduced tungsten that was plasma spherodized were made with minimized porosity. Results of this work indicate that further gas analysis of starting powders and de-gassing of starting powders and/or gas removal during deposition of refractory metals is required

  20. Directed light fabrication of refractory metals and alloys

    International Nuclear Information System (INIS)

    Fonseca, J.C.; Lewis, G.K.; Dickerson, P.G.; Nemec, R.B.

    1999-01-01

    This report covers work performed under Order No. FA0000020 AN Contract DE-AC12-76SN00052 for deposition of refractory pure metals and alloys using the Directed Light Fabrication (DLF) process and represents the progress in depositing these materials through September 1998. In extending the DLF process technology to refractory metals for producing fully dense, structurally sound deposits, several problems have become evident. 1. Control of porosity in DLF-deposited refractory metal is difficult because of gases, apparently present in commercially purchased refractory metal powder starting materials. 2. The radiant heat from the molten pool during deposition melts the DLF powder feed nozzle. 3. The high reflectivity of molten refractory metals, at the Nd-YAG laser wavelength (1.06microm), produces damaging back reflections to the optical train and fiber optic delivery system that can terminate DLF processing. 4. The current limits on the maximum available laser power to prevent back reflection damage limit the parameter range available for densification of refractory metals. The work to date concentrated on niobium, W-25Re, and spherodized tungsten. Niobium samples, made from hydride-dehydride powder, had minimal gas porosity and the deposition parameters were optimized; however, test plates were not made at this time. W-25Re samples, containing sodium and potassium from a precipitation process, were made and porosity was a problem for all samples although minimized with some process parameters. Deposits made from potassium reduced tungsten that was plasma spherodized were made with minimized porosity. Results of this work indicate that further gas analysis of starting powders and de-gassing of starting powders and/or gas removal during deposition of refractory metals is required

  1. Sorption techniques for production of high purity refractory metals

    International Nuclear Information System (INIS)

    Shatalov, V.V.; Peganov, V.A.; Logvinenko, I.A.; Molchanova, T.V.

    2004-01-01

    A consideration is given to potentialities of sorption processes tot provide a high quality of refractory metal and their alloys when using hydrometallurgical methods for raw material processing. The efficiency of application of ion exchange technology is shown for complex solutions reprocessing for various types of polymetallic raw materials, among them uranium ores, enriched concentrates of refractory metal ores, intermediate products, waste solutions. Based on investigation results on the behaviour of elements in process solutions and the mechanism of their sorption and elution, the process of pure chemical compounds production are developed which provide thereafter manufacturing compact metals. The flowsheets developed are mastered on a commercial scale [ru

  2. Recent materials compatibility studies in refractory metal-alkali metal systems for space power applications.

    Science.gov (United States)

    Harrison, R. W.; Hoffman, E. E.; Davies, R. L.

    1972-01-01

    Advanced Rankine and other proposed space power systems utilize refractory metals in contact with both single-phase and two-phase alkali metals at elevated temperatures. A number of recent compatibility experiments are described which emphasize the excellent compatibility of refractory metals with the alkali metals, lithium, sodium, and potassium, under a variety of environmental conditions. The alkali metal compatibilities of tantalum-, columbium-, molybdenum-, and tungsten-base alloys are discussed.

  3. Refractory metal component technology for in-core sensor design

    International Nuclear Information System (INIS)

    Cannon, C.P.

    1986-02-01

    Within recent years, an increasing concern over reactor safety has prompted tests that characterize reactor core environments during transient conditions. Such tests include the Loss-of-Fluid-Tests (Idaho National Engineering Lab (INEL)), Severe Fuel Damage Tests (INEL), Core Debris Rubble Tests (Sandia National Laboratories (SNL)), and similar tests performed by foreign nations. The in-core sensors for these tests require refractory metal components to be compatible with electrical insulator materials as well as materials comprising highly corrosive service mediums. This paper presents the refractory metal technology utilized to provide basic sensor designs in the above mentioned reactor tests

  4. Plasma metallization of refractory carbide powders

    International Nuclear Information System (INIS)

    Koroleva, E.B.; Klinskaya, N.A.; Rybalko, O.F.; Ugol'nikova, T.A.

    1986-01-01

    The effect of treatment conditions in plasma on properties of produced metallized powders of titanium, tungsten and chromium carbides with the main particle size of 40-80 μm is considered. It is shown that plasma treatment permits to produce metallized powders of carbide materials with the 40-80 μm particle size. The degree of metallization, spheroidization, chemical and phase composition of metallized carbide powders are controlled by dispersivity of the treated material, concentration of a metal component in the treated mixtures, rate of plasma flow and preliminary spheroidization procedure

  5. Viscosity measurements of molten refractory metals using an electrostatic levitator

    International Nuclear Information System (INIS)

    Ishikawa, Takehiko; Paradis, Paul-François; Okada, Junpei T; Watanabe, Yuki

    2012-01-01

    Viscosities of several refractory metals (titanium, nickel, zirconium, niobium, ruthenium, rhodium, hafnium, iridium and platinum) and terbium have been measured by the oscillation drop method with an improved procedure. The measured data were less scattered than our previous measurements. Viscosities at their melting temperatures showed good agreement with literature values and some predicted values. (paper)

  6. On calculation of lattice parameters of refractory metal solid solutions

    International Nuclear Information System (INIS)

    Barsukov, A.D.; Zhuravleva, A.D.; Pedos, A.A.

    1995-01-01

    Technique for calculating lattice periods of solid solutions is suggested. Experimental and calculation values of lattice periods of some solid solutions on the basis of refractory metals (V-Cr, Nb-Zr, Mo-W and other) are presented. Calculation error was correlated with experimental one. 7 refs.; 2 tabs

  7. Direct brazing of ceramics, graphite, and refractory metals

    International Nuclear Information System (INIS)

    Canonico, D.A.; Cole, N.C.; Slaughter, G.M.

    1976-03-01

    ORNL has been instrumental in the development of brazing filler metals for joining ceramics, graphite, and refractory metals for application at temperatures above 1000 0 C. The philosophy and techniques employed in the development of these alloys are presented. A number of compositions are discussed that have been satisfactorily used to braze ceramics, graphite, and refractory metals without a prior surface treatment. One alloy, Ti--25 percent Cr--21 percent V, has wet and flowed on aluminum oxide and graphite. Further, it has been utilized in making brazes between different combinations of the three subject materials. The excellent flowability of this alloy and alloys from the Ti--Zr--Ge system is evidenced by the presence of filler metal in the minute pores of the graphite and ceramics

  8. New applications and novel processing of refractory metal alloys

    International Nuclear Information System (INIS)

    Briant, C.L.

    2001-01-01

    Refractory metals have often been limited in their application because of their propensity to oxidize and to undergo a loos of yield strength at elevated temperatures. However, recent developments in both processing and alloy composition have opened the possibility that these materials might be used in structural applications that were not considered possible in the past. At the same time, the use of refractory metals in the electronics industry is growing, particularly with the use of tantalum as a diffusion barrier for copper metallization. Finally, the application of grain boundary engineering to the problem of intergranular fracture in these materials may allow processes to be developed that will produce alloys with a greater resistance to fracture. (author)

  9. Wetting of refractory metals with copper base alloys

    International Nuclear Information System (INIS)

    Anikeev, E.F.; Kostikov, V.I.; Chepelenko, V.N.; Batov, V.M.

    1978-01-01

    The effect is studied of phosphorus upon the wetting of molybdenum, niobium and tantalum by an alloy of the system copper-silver (10%) as a function of contact time and phosphorus concentration. Experiments have been conducted in vacuum of 5x10 -4 mm Hg at 900 deg C. It is established that the introduction of phosphorus into a copper-silver alloy improves the wetting of molybdenum, niobium and tantalum. Formation of intermetallic compounds on the alloy-refractory metal interface can be avoided by adjusting the time of contact of the solder with molybdenum, niobium and tantalum. As a solder with 2.9% phosphorus spreads well over copper, it is suggested to use said solder for brazing copper and the investigated refractory metals in items intended for service at temperatures of up to 600 deg C

  10. Preparation of reactive and refractory metal powders (Paper No. 25)

    International Nuclear Information System (INIS)

    Sundaram, C.V.; Sharma, B.P.; Krishnan, T.S.

    1979-01-01

    In devising processes for the preparation of refractory and reactive metal powders, one has to reckon with many relevant factors. The choice of specific flowsheets is governed by the characteristics of the metal compounds and the reducing agents, the purity required and achievable in the as-reduced powder, the need for further refining of the metal, the possibilities of chemical/physical/mechanical comminution of the purified metal without contamination, and the end application of the powder metal. Micron size zirconium powder used as trigger material in photo-flash bulbs and detonator compositions, tantalum powder of controlled particle size and high purity for the production of electrolytic capacitors, and beryllium metal powder for the preparation of hot pressed powder metallurgy components are illustrative of the variety of reactive metal powders for industrial applications. The work carried out at the Bhabha Atomic Research Centre, Bombay, on the preparation of special metal powders, with particular emphasis on Group IV and V metals and also beryllium is presented. Reduction of metal oxides with alkaline earth metals/hydrides, reduction of metal halides with sodium/magnesium, vacuum arc and electron beam melt purification followed by comminution by hydrogen embrittlement/mechanical comminution are among the processes discussed. (auth.)

  11. A refractory metal gate approach for micronic CMOS technology

    International Nuclear Information System (INIS)

    Lubowiecki, V.; Ledys, J.L.; Plossu, C.; Balland, B.

    1987-01-01

    In the future, devices scaling down, integration density and performance improvements are going to bring a number of conventional circuit design and process techniques to their fundamental limits. To avoid any severe limitations in MOS ULSI (Ultra Large Scale Integration) technologies, interconnection materials and schemes are required to emerge, in order to face the Megabits memory field. Among those, the gate approach will obviously take a keyrole, when the operating speed of ULSI chips will reach the practical upper limits imposed by parasitic resistances and capacitances which stem from the circuit interconnect wiring. Even if fairly suitable for MOS process, doped polycrystalline silicon is being gradually replaced by refractory metal silicide or polycide structures, which match better with low resistivity requirements. However, as we approach the submicronic IC's, higher conductivity materials will be paid more and more attention. Recently, works have been devoted and published on refractory metal gate technologies. Molybdenum or tungsten, deposited either by CVD or PVD methods, are currently reported even if some drawbacks in their process integration still remain. This paper is willing to present such an approach based on tungsten (more reliable than Molybdenum deposited by LPCVD (giving more conductive and more stable films than PVD). Deposition process will be first described. Then CMOS process flow will allow us to focus on specific refractory metal gate issues. Finally, electrical and physical properties will be assessed, which will demonstrate the feasibility of such a technology as well as the compatibility of the tungsten with most of the usual techniques

  12. Liquid uranium contaimment in refractories metals

    International Nuclear Information System (INIS)

    Duarte, J.L.; Padilha, A.F.

    1982-01-01

    Tests were performed on metalic materials for liquid uranium containment up to 2100 0 C. The materials Nb, Mo, Ta and W in the form of crucibles were tested at 2100 0 C for one hour in the presence of flowing argon. After testing, the crucibles were etched using HCl and analysed by optical metallography and electron proble microanalysis. The results are discussed in terms of Berthoud equation and indicated that the solubility limit of the crucible material in uranium at the temperature controlls the crucible dissolution by liquid uranium. The various phases formed, the mechanism of dissolution and the possible material for future use are presented and discussed. (Author) [pt

  13. Thermodynamics of carbon deoxidation and aluminium deoxidation of refractory metals

    International Nuclear Information System (INIS)

    Garg, S.P.; Sundaram, C.V.

    1975-01-01

    Carbon has been used for removing the last traces of oxygen from many refractory metals by evaporation of CO at high temperature and vacuum. Similar purification can also be achieved employing aluminium deoxidation by evaporation of Al 2 Osub(g). In the present paper a theoretical thermodynamic approach has been attempted to evaluate the deoxidation tendencies of refractory metals of groups IV to VI by these two processes. Expressions have been theoretically derived, relating the concentration product of carbon and oxygen in the metal (which is a measure of the carbon deoxidation tendency of the metal) with temperature and pressure, for various M-C-O systems. Similarly the relative vapour pressure values of Alsub(2)Osub(g),Alsub(g)andMO(g) (suboxide of the metal) over various M-Al-O systems have been calculated as a function of aluminium and oxygen contents of the metal. From these analyses, it has been shown that a substantial amount of oxygen can be removed from M-Al-O alloys by aluminium deoxidation. The estimated values are compared with the reported values based on experiment. (author)

  14. Welding and joining of single crystals of BCC refractory metals

    International Nuclear Information System (INIS)

    Hiraoka, Yutaka; Fujii, Tadayuki

    1989-01-01

    Welding and joining is one of key technologies for the wider utilizations of a material. In the present work, the applicability of welding and joining for a single crystal of BCC refractory metal was investigated. Electron-beam welding and tungsten-inert-gas welding by a melt-run technique, and high-temperature brazing by using brazing metals such as Mo-40%Ru alloy, vanadium or platinum were conducted for molybdenum single crystal which had been prepared by means of secondary recrystallization. 12 refs.,12 figs., 2 tabs. (Author)

  15. Brazing refractory metals used in high-temperature nuclear instrumentation

    International Nuclear Information System (INIS)

    Palmer, A. J.; Woolstenhulme, C. J.

    2009-01-01

    As part of the U. S. Department of Energy (DOE)-sponsored Next Generation Nuclear Project (NGNP) currently ongoing at Idaho National Laboratory (INL), the irradiation performance of candidate high-temperature gas reactor fuels and materials is being evaluated at INL's Advanced Test Reactor (ATR). The design of the first Advanced Gas Reactor (AGR-1) TRISO fuel experiment, currently being irradiated in the ATR, required development of special techniques for brazing niobium and molybdenum. Brazing is one technique used to join refractory metals to each other and to stainless steel alloys. Although brazing processes are well established, it is difficult to braze niobium, molybdenum, and most other refractory metals because they quickly develop adherent oxides when exposed to room-temperature air. Specialized techniques and methods were developed by INL to overcome these obstacles. This paper describes the techniques developed for removing these oxides, as well as the ASME Section IX-qualified braze procedures that were developed as part of the AGR-1 project. All brazes were made using an induction coil with an inert or reducing atmosphere at low pressure. Other parameters, such as filler metals, fluxes used, and general setup procedures, are also discussed. (authors)

  16. Brazing Refractory Metals Used In High-Temperature Nuclear Instrumentation

    International Nuclear Information System (INIS)

    Palmer, A.J.; Woolstenhulme, C.J.

    2009-01-01

    As part of the U. S. Department of Energy (DOE) sponsored Next Generation Nuclear Project (NGNP) currently ongoing at Idaho National Laboratory (INL), the irradiation performance of candidate high-temperature gas reactor fuels and materials is being evaluated at INL's Advanced Test Reactor (ATR). The design of the first Advanced Gas Reactor (AGR 1) experiment, currently being irradiated in the ATR, required development of special techniques for brazing niobium and molybdenum. Brazing is one technique used to join refractory metals to each other and to stainless steel alloys. Although brazing processes are well established, it is difficult to braze niobium, molybdenum, and most other refractory metals because they quickly develop adherent oxides when exposed to room-temperature air. Specialized techniques and methods were developed by INL to overcome these obstacles. This paper describes the techniques developed for removing these oxides, as well as the ASME Section IX-qualified braze procedures that were developed as part of the AGR-1 project. All brazes were made using an induction coil with an inert or reducing atmosphere at low pressure. Other parameters, such as filler metals, fluxes used, and general setup procedures, are also discussed

  17. Brazing refractory metals used in high-temperature nuclear instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, A. J. [Idaho National Laboratory, MS 3840, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Woolstenhulme, C. J. [EG and G Services, Inc., (United States)

    2009-07-01

    As part of the U. S. Department of Energy (DOE)-sponsored Next Generation Nuclear Project (NGNP) currently ongoing at Idaho National Laboratory (INL), the irradiation performance of candidate high-temperature gas reactor fuels and materials is being evaluated at INL's Advanced Test Reactor (ATR). The design of the first Advanced Gas Reactor (AGR-1) TRISO fuel experiment, currently being irradiated in the ATR, required development of special techniques for brazing niobium and molybdenum. Brazing is one technique used to join refractory metals to each other and to stainless steel alloys. Although brazing processes are well established, it is difficult to braze niobium, molybdenum, and most other refractory metals because they quickly develop adherent oxides when exposed to room-temperature air. Specialized techniques and methods were developed by INL to overcome these obstacles. This paper describes the techniques developed for removing these oxides, as well as the ASME Section IX-qualified braze procedures that were developed as part of the AGR-1 project. All brazes were made using an induction coil with an inert or reducing atmosphere at low pressure. Other parameters, such as filler metals, fluxes used, and general setup procedures, are also discussed. (authors)

  18. Plasticity enhancement mechanisms in refractory metals and intermetallics

    International Nuclear Information System (INIS)

    Gibala, R.; Chang, H.; Czarnik, C.M.; Edwards, K.M.; Misra, A.

    1993-01-01

    Plasticity enhancement associated with surface films and precipitates or dispersoids in bcc refractory metals is operative in ordered intermetallic compounds. Some results are given for NiAl and MoSi 2 -based materials. The monotonic and cyclic plasticity of NiAl at room temperature can be enhanced by surface films. Ductile second phases also enhance the plasticity of NiAl. MoSi 2 exhibits similar effects of surface films and dispersoids, but primarily at elevated temperatures. The plasticity enhancement is associated with enhanced dislocation generation from constrained deformation at the film-substrate or precipitate/dispersoid-matrix interface of the composite systems

  19. Processing of Refractory Metal Alloys for JOYO Irradiations

    International Nuclear Information System (INIS)

    RF Luther; ME Petrichek

    2006-01-01

    This is a summary of the refractory metal processing experienced by candidate Prometheus materiats as they were fabricated into specimens destined for testing within the JOYO test reactor, ex-reactor testing at Oak Ridge National Laboratory (ORNL), or testing within the NRPCT. The processing is described for each alloy from the point of inception to the point where processing was terminated due to the cancellation of Naval Reactor's involvement in the Prometheus Project. The alloys included three tantalum-base alloys (T-111, Ta-10W, and ASTAR-811C), a niobium-base alloy, (FS-85), and two molybdenum-rhenium alloys, one containing 44.5 w/o rhenium, and the other 47.5 w/o rhenium. Each of these alloys was either a primary candidate or back-up candidate for cladding and structural applications within the space reactor. Their production was intended to serve as a forerunner for large scale production ingots that were to be procured from commercial refractory metal vendors such as Wah Chang

  20. Synthesis, Structure, and Properties of Refractory Hard-Metal Borides

    Science.gov (United States)

    Lech, Andrew Thomas

    As the limits of what can be achieved with conventional hard compounds, such as tungsten carbide, are nearing reach, super-hard materials are an area of increasing industrial interest. The refractory hard metal borides, such as ReB2 and WB4, offer an increasingly attractive alternative to diamond and cubic boron nitride as a next-generation tool material. In this Thesis, a thorough discussion is made of the progress achieved by our laboratory towards understanding the synthesis, structure, and properties of these extremely hard compounds. Particular emphasis is placed on structural manipulation, solid solution formation, and the unique crystallographic manifestations of what might also be called "super-hard metals".

  1. Application of metal oxide refractories for melting and casting reactive metals

    International Nuclear Information System (INIS)

    Jessen, N.C. Jr.; Holcombe, C.E. Jr.; Townsend, A.B.

    1979-01-01

    Extensive investigations have been conducted to develop metal oxide refractories for containment of molten uranium and uranium alloys. Since uranium and uranium alloys are readily susceptable to the formation of complex oxides, carbides, nitrides, intermetallic compounds, and suboxide reactions, severe problems exist for the production of quality castings. These contamination reactions are dependent on temperature, pressure, and molten metal interfacial reactions. The need for high purity metals to meet specification repeatedly has resulted in the development of improved metal oxide refractories and sophisticated furnace controls. Applications of Y 2 O 3 for use as a crucible and mold coating, precision molds and cores, and high temperature castable ceramics are discussed. Experimental results on melt impurity levels, thermal controls during melting, surface interactions and casting quality are presented

  2. Refractory metal alloys and composites for space power systems

    International Nuclear Information System (INIS)

    Stephens, J.R.; Petrasek, D.W.; Titran, R.H.

    1994-01-01

    Space power requirements for future NASA and other United States missions will range from a few kilowatts to megawatts of electricity. Maximum efficiency is a key goal of any power system in order to minimize weight and size so that the space shuttle may be used a minimum number of times to put the power supply into orbit. Nuclear power has been identified as the primary power source to meet these high levels of electrical demand. One method to achieve maximum efficiency is to operate the power supply, energy conversion system, and related components at relatively high temperatures. NASA Lewis Research Center has undertaken a research program on advanced technology of refractory metal alloys and composites that will provide base line information for space power systems in the 1900's and the 21st century. Basic research on the tensile and creep properties of fibers, matrices, and composites will be discussed

  3. Research on refractory, reactive and rare metals in BARC

    International Nuclear Information System (INIS)

    Banerjee, Srikumar

    2016-01-01

    for specific applications. The presentation will essentially attempt to give an account of the development of refractory, reactive and rare metals in BARC over the period of nearly fifty years. (author)

  4. Nanostructure formation on refractory metal surfaces irradiated by helium plasmas

    International Nuclear Information System (INIS)

    Takamura, Shuichi; Kajita, Shin; Ohno, Noriyasu

    2013-01-01

    Helium defects on plasma-facing refractory metals like tungsten have been studied in fusion sciences from the view point of the effects on metal surface properties, concentrating on the bubble formation. However, the surface morphology over the lower surface temperature range was found recently to be changed drastically, something like cotton down or arborescence, sometimes called as “fuzz”. The formation process, although still open problem, would be discussed in terms of viscoelastic model with the effect of surface tension, taking account of its thermal properties and nano-bubbles inside the thin fibers. Some physical surface characteristics like electron emission, radiation emissivity and sputtering are quite influenced by its forest-like structure. Unipolar arcing has been newly studied by using such a surface structure which makes its initiation controllable. In the present report, other examples of nanostructure formation in a variety of particle incident conditions have been introduced as well as the possibility of its industrial applications to enhance interdisciplinary interests. (author)

  5. Chemical vapor deposition of refractory metals and ceramics III

    International Nuclear Information System (INIS)

    Gallois, B.M.; Lee, W.Y.; Pickering, M.A.

    1995-01-01

    The papers contained in this volume were originally presented at Symposium K on Chemical Vapor Deposition of Refractory Metals and Ceramics III, held at the Fall Meeting of the Materials Research Society in Boston, Massachusetts, on November 28--30, 1994. This symposium was sponsored by Morton International Inc., Advanced Materials, and by The Department of Energy-Oak Ridge National Laboratory. The purpose of this symposium was to exchange scientific information on the chemical vapor deposition (CVD) of metallic and ceramic materials. CVD technology is receiving much interest in the scientific community, in particular, to synthesize new materials with tailored chemical composition and physical properties that offer multiple functionality. Multiphase or multilayered films, functionally graded materials (FGMs), ''smart'' material structures and nanocomposites are some examples of new classes of materials being produced via CVD. As rapid progress is being made in many interdisciplinary research areas, this symposium is intended to provide a forum for reporting new scientific results and addressing technological issues relevant to CVD materials and processes. Thirty four papers have been processed separately for inclusion on the data base

  6. Radiation hardening and embrittlement of some refractory metals and alloys

    International Nuclear Information System (INIS)

    Fabritsiev, S.; Pokrovskyb

    2007-01-01

    Tungsten is proposed for application in the ITER divertor and limiter as plasma facing material. The tungsten operation temperature in the ITER divertor is relatively high. Hence, the ductile properties of tungsten will be controlled by the low temperature radiation embrittlement. The mechanism of radiation hardening and embrittlement under neutron irradiation at low temperature is well studied for FCC metals, in particular for copper. At the same time, low-temperature radiation hardening of BCC materials, in particular for refractory metals, is less studied. This study presents the results of investigation into radiation hardening and embrittlement of pure metals: W, Mo and Nb, and W-Re and Ta-4W alloys. The materials were in the annealed conditions. The specimens were irradiated in the SM-2 reactor to doses of 10 -4 -10 -1 dpa at 80 C and then tested for tension at 80 C. The study of the stress-strain curves of unirradiated specimens revealed a yield drop for W, Mo, Nb, Ta-4W, W-Re. After the yield drop some metals (Mo,Nb) retain their capability for strain hardening and demonstrate a high elongation (20-50%). Radiation hardening is maximum in Mo (∝400MPa) and minimum in Nb (∝100 MPa). In this case the dependence slope for Nb is similar to that for pure copper irradiated in SM-2 under the same conditions. Ii and Ta-4W have a higher slope. Measurement of electrical resistivity of irradiated specimens showed that for all materials it is increased monotonously with an increase in the irradiation dose. A minimum gain in electrical resistivity with a dose was observed for Nb (∝3% at 0.1 dpa). As for Mo it was essentially higher, i.e. ∝ 30%. The gain was maximum for W-Re alloy. Comparison of radiation hardening dose dependencies obtained in this study with the data for FCC metals (Cu) showed that in spite of the quantitative difference the qualitative behavior of these two classes of metals is similar. (orig.)

  7. Halo Formation During Solidification of Refractory Metal Aluminide Ternary Systems

    Science.gov (United States)

    D'Souza, N.; Feitosa, L. M.; West, G. D.; Dong, H. B.

    2018-02-01

    The evolution of eutectic morphologies following primary solidification has been studied in the refractory metal aluminide (Ta-Al-Fe, Nb-Al-Co, and Nb-Al-Fe) ternary systems. The undercooling accompanying solid growth, as related to the extended solute solubility in the primary and secondary phases can be used to account for the evolution of phase morphologies during ternary eutectic solidification. For small undercooling, the conditions of interfacial equilibrium remain valid, while in the case of significant undercooling when nucleation constraints occur, there is a departure from equilibrium leading to unexpected phases. In Ta-Al-Fe, an extended solubility of Fe in σ was observed, which was consistent with the formation of a halo of μ phase on primary σ. In Nb-Al-Co, a halo of C14 is formed on primary CoAl, but very limited vice versa. However, in the absence of a solidus projection it was not possible to definitively determine the extended solute solubility in the primary phase. In Nb-Al-Fe when nucleation constraints arise, the inability to initiate coupled growth of NbAl3 + C14 leads to the occurrence of a two-phase halo of C14 + Nb2Al, indicating a large undercooling and departure from equilibrium.

  8. Breakdown resistance of refractory metals compared to copper

    CERN Document Server

    Taborelli, M; Kildemo, M

    2004-01-01

    The behaviour of Mo, W and Cu with respect to electrical breakdown in ultra high vacuum has been investigated by means of a capacitor discharge method. The maximum stable electric field without breakdown and the field enhancement factor, beta have been measured between electrodes of the same material in a sphere/plane geometry for anode and cathode, respectively. The maximum stable field increases as a function of the number of breakdown events for W and Mo. In contrast, no systematic increase is observed for Cu. The highest values obtained are typically 500 MV/m for W, 350 MV/m for Mo and only 180 MV/m for Cu. This conditioning, found for the refractory metals, corresponds to a simultaneous decrease of beta and is therefore related to the field emission properties of the surface and their modification upon sparking. Accordingly, high beta values and no applicable field increase occur for Cu even after repeated breakdown. The results are compared with RF breakdown experiments [1] performed on prototype 30 GHz...

  9. Methodology for Life Testing of Refractory Metal / Sodium Heat Pipes

    International Nuclear Information System (INIS)

    Martin, James J.; Reid, Robert S.

    2006-01-01

    This work establishes an approach to generate carefully controlled data to find heat pipe operating life with material-fluid combinations capable of extended operation. To accomplish this goal acceleration is required to compress 10 years of operational life into 3 years of laboratory testing through a combination of increased temperature and mass fluence. Specific test series have been identified, based on American Society for Testing and Materials (ASTM) specifications, to investigate long-term corrosion rates. The refractory metal selected for demonstration purposes is a molybdenum-44.5% rhenium alloy formed by powder metallurgy. The heat pipes each have an annular crescent wick formed by hot isostatic pressing of molybdenum-rhenium wire mesh. The heat pipes are filled by vacuum distillation with purity sampling of the completed assembly. Round-the-clock heat pipe tests with 6-month destructive and non-destructive inspection intervals are conducted to identify the onset and level of corrosion. Non-contact techniques are employed to provide power to the evaporator (radio frequency induction heating at 1 to 5 kW per heat pipe) and calorimetry at the condenser (static gas gap coupled water cooled calorimeter). The planned operating temperature range extends from 1123 to 1323 K. Accomplishments before project cancellation included successful development of the heat pipe wick fabrication technique, establishment of all engineering designs, baseline operational test requirements, and procurement/assembly of supporting test hardware systems. (authors)

  10. Brazilian mineral resources of refractory metals: Nb, Ta, W and Mo

    International Nuclear Information System (INIS)

    Barbosa, F.M.; Manso, G.C.

    1984-01-01

    A brief outlook of selected Brazilian refractory metals resources is presented. The metals are dealt separately with topics covering resources availability, production, Brazilian foreign trade, apparent consumption, and supply-demand balance with emphasis varying according to the specific metal characteristics. (E.G.) [pt

  11. Structure and properties of transition metal-metalloid glasses based on refractory metals

    International Nuclear Information System (INIS)

    Johnson, W.L.; Williams, A.R.

    1979-01-01

    The structure and properties of several new transition metal-metalloid (TM/sub 1-x/M/sub x/) metallic glasses based on refractory transition metals (e.g. Mo, W, Ru etc.) have been systemically investigated as a function of composition. The structure of the alloys has been investigated by x-ray diffraction methods and measurements of superconducting properties, electrical resistivity, density, hardness, and mechanical behavior were made. These data are used in developing a novel description of the structure of TM/sub 1-x/M/sub x/ glasses. The experimental evidence suggests that an ideal amorphous phase forms at a specific composition x/sub c/ and that this phase has a well defined atomic short range order. For metallic glasses having x x/sub c/. This novel picture can explain the variation of many properties of these glasses with metalloid concentration

  12. Review of alkali metal and refractory alloy compatibility for Rankine cycle applications

    International Nuclear Information System (INIS)

    DiStefano, J.R.

    1989-01-01

    The principal corrosion mechanisms in refractory metal-alkali systems are dissolution, mass transfer, and impurity reactions. In general, niobium, tantalum, molybdenum, and tungsten have low solubilities in the alkali metals, even to very high temperatures, and static corrosion studies have verified that the systems are basically compatible. Loop studies with niobium and tantalum based alloys do not indicate any serious problems due to temperature gradient mass transfer. Above 1000 K, dissimilar metal mass transfer is noted between the refractory metals and iron or nickel based alloys. The most serious corrosion problems encountered are related to impurity reactions associated with oxygen

  13. Production of small diameter high-temperature-strength refractory metal wires

    Science.gov (United States)

    Petrasek, D. W.; Signorelli, R. A.; King, G. W.

    1973-01-01

    Special thermomechanical techniques (schedules) have been developed to produce small diameter wire from three refractory metal alloys: colombian base alloy, tantalum base alloy, and tungsten base alloy. High strengths of these wires indicate their potential for contributing increased strength to metallic composites.

  14. Development of various welding techniques for refractory and reactive metals and alloys

    International Nuclear Information System (INIS)

    Tonpe, Sunil; Saibaba, N.

    2016-01-01

    Nuclear Fuel Complex (NFC), Hyderabad, India with its excellent manufacturing facilities, produces nuclear fuel and structural components for nuclear reactors. NFC has taken up the challenging job of production of various critical components made out of refractory and reactive metals and alloys for nuclear and aerospace applications as an indigenization import substitute program. Refractory metals are prime candidates for many high temperature aerospace components because of refractory metal's high melting points and inherent creep resistance. The use of refractory metals is often limited because of their poor room temperature properties, inadequate oxidation resistance at elevated temperatures, difficulties associated with joining or welding etc. These advanced materials demand stringent requirement with respect to chemistry, dimensional tolerances, mechanical and metallurgical properties. This paper discusses in detail various welding techniques adopted in NFC for refractory and reactive metals and alloys such as Nb, Zr, Ti, Ta, Zircaloy, Titanium-half alloy etc. to manufacture various components and assemblies required for nuclear and aerospace applications

  15. Multifunctional Metallic and Refractory Materials for Energy Efficient Handling of Molten Metals

    Energy Technology Data Exchange (ETDEWEB)

    Xingbo Liu; Ever Barbero; Bruce Kang; Bhaskaran Gopalakrishnan; James Headrick; Carl Irwin

    2009-02-06

    The goal of the project was to extend the lifetime of hardware submerged in molten metal by an order of magnitude and to improve energy efficiency of molten metal handling process. Assuming broad implementation of project results, energy savings in 2020 were projected to be 10 trillion BTU/year, with cost savings of approximately $100 million/year. The project team was comprised of materials research groups from West Virginia University and the Missouri University of Science and Technology formerly University of Missouri – Rolla, Oak Ridge National Laboratory, International Lead and Zinc Research Organization, Secat and Energy Industries of Ohio. Industry partners included six suppliers to the hot dip galvanizing industry, four end-user steel companies with hot-dip Galvanize and/or Galvalume lines, eight refractory suppliers, and seven refractory end-user companies. The results of the project included the development of: (1) New families of materials more resistant to degradation in hot-dip galvanizing bath conditions were developed; (2) Alloy 2020 weld overlay material and process were developed and applied to GI rolls; (3) New Alloys and dross-cleaning procedures were developed for Galvalume processes; (4) Two new refractory compositions, including new anti-wetting agents, were identified for use with liquid aluminum alloys; (5) A new thermal conductivity measurement technique was developed and validated at ORNL; (6) The Galvanizing Energy Profiler Decision Support System (GEPDSS)at WVU; Newly Developed CCW Laser Cladding Shows Better Resistance to Dross Buildup than 316L Stainless Steel; and (7) A novel method of measuring the corrosion behavior of bath hardware materials. Project in-line trials were conducted at Southwire Kentucky Rod and Cable Mill, Nucor-Crawfordsville, Nucor-Arkansas, Nucor-South Carolina, Wheeling Nisshin, California Steel, Energy Industries of Ohio, and Pennex Aluminum. Cost, energy, and environmental benefits resulting from the project

  16. High density crystalline boron prepared by hot isostatic pressing in refractory metal containers

    Science.gov (United States)

    Hoenig, C.L.

    1993-08-31

    Boron powder is hot isostatically pressed in a refractory metal container to produce a solid boron monolith with a bulk density at least 2.22 g/cc and up to or greater than 2.34 g/cc. The refractory metal container is formed of tantalum, niobium, tungsten, molybdenum or alloys thereof in the form of a canister or alternatively plasma sprayed or chemical vapor deposited onto a powder compact. Hot isostatic pressing at 1,800 C and 30 PSI (206.8 MPa) argon pressure for four hours produces a bulk density of 2.34 g/cc. Complex shapes can be made.

  17. Mixed Uranium/Refractory Metal Carbide Fuels for High Performance Nuclear Reactors

    International Nuclear Information System (INIS)

    Knight, Travis; Anghaie, Samim

    2002-01-01

    Single phase, solid-solution mixed uranium/refractory metal carbides have been proposed as an advanced nuclear fuel for advanced, high-performance reactors. Earlier studies of mixed carbides focused on uranium and either thorium or plutonium as a fuel for fast breeder reactors enabling shorter doubling owing to the greater fissile atom density. However, the mixed uranium/refractory carbides such as (U, Zr, Nb)C have a lower uranium densities but hold significant promise because of their ultra-high melting points (typically greater than 3700 K), improved material compatibility, and high thermal conductivity approaching that of the metal. Various compositions of (U, Zr, Nb)C were processed with 5% and 10% metal mole fraction of uranium. Stoichiometric samples were processed from the constituent carbide powders, while hypo-stoichiometric samples with carbon-to-metal (C/M) ratios of 0.92 were processed from uranium hydride, graphite, and constituent refractory carbide powders. Processing techniques of cold uniaxial pressing, dynamic magnetic compaction, sintering, and hot pressing were investigated to optimize the processing parameters necessary to produce high density (low porosity), single phase, solid-solution mixed carbide nuclear fuels for testing. This investigation was undertaken to evaluate and characterize the performance of these mixed uranium/refractory metal carbides for high performance, ultra-safe nuclear reactor applications. (authors)

  18. Synthesis of carbides of refractory metals in salt melts

    International Nuclear Information System (INIS)

    Ilyushchenko, N.G.; Anfinogenov, A.I.; Chebykin, V.V.; Chernov, Ya.B.; Shurov, N.I.; Ryaposov, Yu.A.; Dobrynin, A.I.; Gorshkov, A.V.; Chub, A.V.

    2003-01-01

    The ion-electron melts, obtained through dissolving the alkali and alkali-earth metals in the molten chlorides above the chloride melting temperature, were used for manufacturing the high-melting metal carbides as the transport melt. The lithium, calcium and magnesium chlorides and the mixture of the lithium chloride with the potassium or calcium chloride were used from the alkali or alkali-earth metals. The metallic lithium, calcium, magnesium or the calcium-magnesium mixtures were used as the alkali or alkali-earth metals. The carbon black or sugar was used as carbon. It is shown, that lithium, magnesium or calcium in the molten salts transfer the carbon on the niobium, tantalum, titanium, forming the carbides of the above metals. The high-melting metal carbides are obtained both from the metal pure powders and from the oxides and chlorides [ru

  19. PARTITIONING OF THE REFRACTORY METALS, NICKEL AND CHROMIUM, IN COMBUSTION SYSTEMS

    Science.gov (United States)

    The partitioning of nickel (Ni) and Chromium (Cr) in combustion systems was investigated theoretically and experimentally. In comparison to other volatile and semi-volatile metals, both Ni and Cr are usually considered to be refractory (non-volatile). Theoretical predictions ba...

  20. ELABORATION PROCESS OF REFRACTORY MATERIALS BY REACTIVE PROJECTION OF OXIDE, PEROXIDE AND METALS

    OpenAIRE

    Pilatti , M.; Cransveld , J.; Raymond , G.; Plumat , E.; Duvigneaud , P.

    1986-01-01

    A device has been set up for spraying with accuracy a compound having a controlled grain size of refractory oxide, peroxide and metals. The refractory material is obtained by melting and recristallisation on a preheated substrate. Composition in the CaO.Al2O3 system and in the CaO-Al2O3-ZrO2 system have been synthesized. They have been analysed by X-ray diffraction and SEM. Dense and well cristallized materials have been deposited. This process can be successfully applied for the repair of a ...

  1. Wettability between TiN,TiC Containing Carbon Composite Refractory and Molten Slag or Hot Metal

    Institute of Scientific and Technical Information of China (English)

    SHIYue-xun; LIYingand; 等

    1994-01-01

    In order to develop a new-type TiC-TiN containing carbon composite refractory so as to improve the service life of blast furnace hearth,the wettability between the carbon refractory and molten slag or metal has been mea-sured.It was indicated that the carbon refractory is wet-ted by slag(θ≤90°) when(TiC+TiN)>33.52%,The effects of TiN or TiC on wetting behavior are basi-cally identical.When the amount of TiC in the carbon com-posite refractory is greater than 60% it will be wetted by hot metal;therefore,the carbon composite refractory will be wetted by slag but not permeated by hot metal when the amount of TiC is restricted.

  2. Generation of dense, pulsed beams of refractory metal atoms using two-stage laser ablation

    International Nuclear Information System (INIS)

    Kadar-Kallen, M.A.; Bonin, K.D.

    1994-01-01

    We report a technique for generating a dense, pulsed beam of refractory metal atoms using two-stage laser ablation. An atomic beam of uranium was produced with a peak, ground-state number density of 1x10 12 cm -3 at a distance of z=27 cm from the source. This density can be scaled as 1/z 3 to estimate the density at other distances which are also far from the source

  3. Possibility of surface carburization of refractory metals of electric spark alloying

    International Nuclear Information System (INIS)

    Verkhoturov, A.D.; Isaeva, L.P.; Timofeeva, I.I.; Tsyban', V.A.

    1981-01-01

    The paper is concerned with a study in the alloying layer formation under electric spark alloying of refractory (Ti, Zr, Nb, Mo, W, Co, Fe) metals with graphite in argon and in air using the EhFI-46A installation. It is shown that in electric spark alloying with graphite there appear certain specific conditions for the alloying layer formation manifested in the cathode mass decrease during treatment. In this case an alloying layer consisting of carbides, oxides of the corresponding metals and material of the base is formed on the metal surface. The best carburization conditions in the process of electric spark alloying are realized for group 4 metals when treating them in ''soft'' regime, specific time of alloying being 1-3 min/sm 2 and for group 5 and 6 metals - in ''rigid'' regime of treatment and specific time of alloying 3-5 min/cm 2 [ru

  4. CVD refractory metals and alloys for space nuclear power application

    International Nuclear Information System (INIS)

    Yang, L.; Gulden, T.D.; Watson, J.F.

    1984-01-01

    CVD technology has made significant contributions to the development of space nuclear power systems during the period 1962 to 1972. For the in-core thermionic concept, CVD technology is essential to the fabrication of the tungsten electron emitter. For the liquid metal cooled fuel pin using uranium nitride as fuel and T-111 and Nb-1 Zr as cladding, a tungsten barrier possibly produced by CVD methods is essential to the fuel-cladding compatibility at the designed operating temperature. Space power reactors may use heat pipes to transfer heat from the reactor core to the conversion system. CVD technology has been used for fabricating the heat pipe used as cross-flow heat exchanger, including the built-in channels on the condenser wall for liquid lithium return. 28 references, 17 figures

  5. Microstructural studies of hydrogen and deuterium in bcc refractory metals. Final technical report

    International Nuclear Information System (INIS)

    Moss, S.C.

    1984-04-01

    Research was conducted on the microstructural atomic arrangements in alloys of hydrogen and deuterium with bcc refractory metals with emphasis on V and Nb. Because these are interstitial phases in which the host metal lattice is substantially deformed by the incorporation of the H(D) atoms, there are pronounced x-ray scattering effects. X-ray diffraction was used, with neutron scattering providing useful corollary data. One objective was to determine the phase relations, solid solution structures and phase transitions in metal-hydride alloys which depend upon the hydrogen-hydrogen interaction via the displacement field of the metal atoms. This has often included the elucidation of subtle thermodynamic properties (as in critical wetting) which are revealed in structural studies. Crystals were supplied for positron annihilation studies of the Fermi surface of H-Ta alloys which have revealed significant electronic trends. Work on alkali-graphite intercalates was initiated

  6. Production of crystalline refractory metal oxides containing colloidal metal precipitates and useful as solar-effective absorbers

    Science.gov (United States)

    Narayan, Jagdish; Chen, Yok

    1983-01-01

    This invention is a new process for producing refractory crystalline oxides having improved or unusual properties. The process comprises the steps of forming a doped-metal crystal of the oxide; exposing the doped crystal in a bomb to a reducing atmosphere at superatmospheric pressure and a temperature effecting precipitation of the dopant metal in the crystal lattice of the oxide but insufficient to effect net diffusion of the metal out of the lattice; and then cooling the crystal. Preferably, the cooling step is effected by quenching. The process forms colloidal precipitates of the metal in the oxide lattice. The process may be used, for example, to produce thermally stable black MgO crystalline bodies containing magnetic colloidal precipitates consisting of about 99% Ni. The Ni-containing bodies are solar-selective absorbers, having a room-temperature absorptivity of about 0.96 over virtually all of the solar-energy spectrum and exhibiting an absorption edge in the region of 2 .mu.m. The process parameters can be varied to control the average size of the precipitates. The process can produce a black MgO crystalline body containing colloidal Ni precipitates, some of which have the face-centered-cubic structure and others of which have the body-centered cubic structure. The products of the process are metal-precipitate-containing refractory crystalline oxides which have improved or unique optical, mechanical, magnetic, and/or electronic properties.

  7. Study of impurity composition of some compounds of refractory metals by instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Kaganov, L.K.; Dzhumakulov, D.T.; Mukhamedshina, N.M.

    1994-01-01

    The compounds of refractory transition metals find wide application in all fields of engineering, in particular in microelectronics to manufacture contact-barrier layers of thin-film current-conducting systems of silicon instruments, large and very large scale integrated circuits. Production of such materials is realted with the need to apply the analytical control methods that allow to determine a large number of elements with high reliability. The instrumental neutron-activation techniques have been developed to determine impurity composition of the following compounds: MoSi 2 , WSi 2 , TiB 2 , NbB 2 , TiC, NbC

  8. The diffusion bonding of silicon carbide and boron carbide using refractory metals

    International Nuclear Information System (INIS)

    Cockeram, B.V.

    1999-01-01

    Joining is an enabling technology for the application of structural ceramics at high temperatures. Metal foil diffusion bonding is a simple process for joining silicon carbide or boron carbide by solid-state, diffusive conversion of the metal foil into carbide and silicide compounds that produce bonding. Metal diffusion bonding trials were performed using thin foils (5 microm to 100 microm) of refractory metals (niobium, titanium, tungsten, and molybdenum) with plates of silicon carbide (both α-SiC and β-SiC) or boron carbide that were lapped flat prior to bonding. The influence of bonding temperature, bonding pressure, and foil thickness on bond quality was determined from metallographic inspection of the bonds. The microstructure and phases in the joint region of the diffusion bonds were evaluated using SEM, microprobe, and AES analysis. The use of molybdenum foil appeared to result in the highest quality bond of the metal foils evaluated for the diffusion bonding of silicon carbide and boron carbide. Bonding pressure appeared to have little influence on bond quality. The use of a thinner metal foil improved the bond quality. The microstructure of the bond region produced with either the α-SiC and β-SiC polytypes were similar

  9. Efficacy of Self-Expandable Metallic Stent Inserted for Refractory Hemorrhage of Duodenal Cancer

    Directory of Open Access Journals (Sweden)

    Takashi Orii

    2016-05-01

    Full Text Available Because of advances in the technology of gastrointestinal endoscopy and improvements in the quality of stents, it has become routine to place a stent as palliative therapy for malignant gastrointestinal obstruction. On the other hand, stent placement for malignant gastrointestinal hemorrhage has scarcely been reported, although it may be performed for hemorrhage of the esophageal varicose vein. We recently experienced a patient with refractory hemorrhage from an unresectable duodenal cancer who underwent placement of a self-expandable metallic stent (SEMS and thereafter had no recurrence of the hemorrhage. A 46-year-old man underwent laparotomy to radically resect a cancer in the third portion of the duodenum, which invaded widely to the superior mesenteric vein and its branches and was considered unresectable. After stomach-partitioning gastrojejunostomy was performed, chemotherapy was initiated according to the regimen of chemotherapy of far advanced gastric cancer. One year and 4 months after induction of chemotherapy, gastrointestinal hemorrhage occurred. Upper gastrointestinal endoscopy revealed the hemorrhage oozing from the duodenal cancer, and endoscopic hemostasis, such as injection of hypertonic saline epinephrine and argon plasma coagulation, was unsuccessful. Twenty days after emergence of the hemorrhage, an endoscopic covered SEMS was placed with confirmation by fluoroscopy. Immediately after placement of the stent, the tarry stool stopped and the anemia ceased to progress. The recurrence of the hemorrhage has not been confirmed without migration of the stent. SEMS is an effective hemostatic procedure for malignant refractory hemorrhage.

  10. Applications of electricity and corrosion. Precautions for use of metals and stainless and refractory alloys

    International Nuclear Information System (INIS)

    Gras, J.M.

    1993-09-01

    The development of applications of electricity poses highly diversified problems with materials where the resistance to corrosion prevails. Corrosion occurs under various conditions, which sometimes look harmless, and it covers diverse phenomenons linked to the nature of materials and to the physical and chemical context. However, in spite of the diversity of the processes used (electrical boilers, mechanical steam compression, heat pumps, Joule effect,) the knowledge required to approach the corrosion problems corresponds to a limited number of generic situations with regard not only to the phenomenons proper (general corrosion of copper, pitting and stress corrosion cracking of stainless steels, refractory alloys oxidation,) but also to chemical conditions which favour the corrosion (natural waters, acidic condensates, hot gases). This report is a short guide to anti-corrosion. With the aid of questions asked during the past few years, it aims to provide engineers in charge of the development of applications of electricity with a few recommendations upon the precautions for use of metallic materials. We analyze in turn the problems met with wet air and drying mists, chloride-containing neutral waters, alkaline waters and caustic media, acidic waters and concentrated acids, and, last, hot gases. We lay stress upon the behaviour of materials deemed to withstand corrosion under aqueous conditions (stainless steels and alloys, copper,titanium) and corrosion at high temperatures (refractory alloys). (author). 11 figs., 43 refs., 11 tabs

  11. A simple technique to assess bacterial attachment to metal surfaces

    Digital Repository Service at National Institute of Oceanography (India)

    Sonak, S.; Bhosle, N.B.

    attached bacterial cells with crystal violet (0.5%). The crystal violet stain from the cells was eluted with an aqueous solution of sodium deoxycholate (2%). The absorbance of the crystal violet stain in deoxycholate was measured at 570 nm. The viable cell...

  12. Experimental Design for Evaluation of Co-extruded Refractory Metal/Nickel Base Superalloy Joints

    International Nuclear Information System (INIS)

    ME Petrichek

    2005-01-01

    Prior to the restructuring of the Prometheus Program, the NRPCT was tasked with delivering a nuclear space reactor. Potential NRPCT nuclear space reactor designs for the Prometheus Project required dissimilar materials to be in contact with each other while operating at extreme temperatures under irradiation. As a result of the high reactor core temperatures, refractory metals were the primary candidates for many of the reactor structural and cladding components. They included the tantalum-base alloys ASTAR-811C and Ta-10W, the niobium-base alloy FS-85, and the molybdenum base alloys Moly 41-47.5 Rhenium. The refractory metals were to be joined to candidate nickel base alloys such as Haynes 230, Alloy 617, or Nimonic PE 16 either within the core if the nickel-base alloys were ultimately selected to form the outer core barrel, or at a location exterior to the core if the nickel-base alloys were limited to components exterior to the core. To support the need for dissimilar metal joints in the Prometheus Project, a co-extrusion experiment was proposed. There are several potential methods for the formation of dissimilar metal joints, including explosive bonding, friction stir welding, plasma spray, inertia welding, HIP, and co-extrusion. Most of these joining methods are not viable options because they result in the immediate formation of brittle intermetallics. Upon cooling, intermetallics form in the weld fusion zone between the joined metals. Because brittle intermetallics do not form during the initial bonding process associated with HIP, co-extrusion, and explosive bonding, these three joining procedures are preferred for forming dissimilar metal joints. In reference to a Westinghouse Astronuclear Laboratory report done under a NASA sponsored program, joints that were fabricated between similar materials via explosive bonding had strengths that were directly affected by the width of the diffusion barrier. It was determined that the diffusion zone should not exceed

  13. A preliminary study of oxidation-resistant coatings on refractory-metal thermocouple sheaths

    International Nuclear Information System (INIS)

    Wilkins, S.C.

    1985-01-01

    The need to make reliable temperature measurements up to 2200 0 C or higher in steam environments during in-pile nuclear fuel damage tests led to a search for oxidation-resistant coatings for the refractory-metal sheaths used to enclose and protect thermocouples used for such measurements. Iridium, thoria, and thoria-over-iridium coatings were separately sputter-deposited on molybdenum-rhenium alloy protection tubes for evaluation. The coated samples were individually heated in flowing steam in an induction furnace. An extension tube welded to each sample was connected to a vacuum pump and gauge; failure of the sample was detected by noting the degradation of the vacuum maintained in the sample. Relatively heavy coatings of iridium provided a modest degree of oxidation protection at the temperatures of interest. Thoria coatings provided no significant protection at those temperatures, compared to uncoated control samples

  14. Ceramic/metal seals. [refractory materials for hermetic seals for lighium-metal sulfide batteries

    Science.gov (United States)

    Bredbenner, A. M.

    1977-01-01

    Design criteria are discussed for a hermetic seal capable of withstanding the 450 C operating temperature of a lithium-metal sulfide battery system. A mechanical seal consisting of two high strength alloy metal sleeves welded or brazed to a conductor assembly and pressed onto a ceramic is described. The conductor center passes through the ceramic but is not sealed to it. The seal is effected on the outside of the taper where the tubular part is pressed down over and makes contact.

  15. Attachments

    International Nuclear Information System (INIS)

    2000-01-01

    In this attachment to the Annual report 1999 of the Nuclear Regulatory Authority of the Slovak Republic (UJD) the economic and personnel data of the UJD, used abbreviations, as well as the International nuclear event scales - INES are presented. Professional level of staff of the UJD is influenced by the education structure of its staff, when nearly 75% of the total number of staff has a university degree. A of 31.12.1999 there were 79 employees as average calculated number. Financing of the regulator in 1999 was mainly provided from the state budget, which represented 96% of all expenditures. The total volume of expenditures for UJD activity funded from the state budget achieved as of 31.12.1999 Slovak crowns (SK) 67 067 thousands. In the main category of expenditures an amount of SK 63 499 thous. was used for current activities, and the difference of SK 3 587 thous. was used for raising capital assets. Significant increase expenditures in the evaluated year compared to the 1998 was caused by a special purpose payment made by the Slovakia into the Fund for reconstruction of the Chernobyl cover (SK 19 996 thous.) funded through the budget chapter of the regulator. In the structure of current expenditures the highest share is taken by current transfers to abroad in total of SK 22 543 thous., i.e. contribution to reconstruction of Chernobyl cover made to the EBRD and contributions to the Fund of Technical Co-operation of the IAEA. For procurement of goods and services an amount of SK 19 814 thous. was spent, of which SK 7 054 thous. was used for funding science and technology tasks which were contracted out. The decision-making process in performing state supervision forced UJD to contact out various expert opinions and studies, for which UJD paid SK 2 058 thous. in total. Other expenditures in a volume of SK 10 702 thous. represent travel expenses, goods and services for UJD, rent for offices and other inevitable expenses. Salaries of staff represented SK 15 953

  16. Fabrication of smooth patterned structures of refractory metals, semiconductors, and oxides via template stripping.

    Science.gov (United States)

    Park, Jong Hyuk; Nagpal, Prashant; McPeak, Kevin M; Lindquist, Nathan C; Oh, Sang-Hyun; Norris, David J

    2013-10-09

    The template-stripping method can yield smooth patterned films without surface contamination. However, the process is typically limited to coinage metals such as silver and gold because other materials cannot be readily stripped from silicon templates due to strong adhesion. Herein, we report a more general template-stripping method that is applicable to a larger variety of materials, including refractory metals, semiconductors, and oxides. To address the adhesion issue, we introduce a thin gold layer between the template and the deposited materials. After peeling off the combined film from the template, the gold layer can be selectively removed via wet etching to reveal a smooth patterned structure of the desired material. Further, we demonstrate template-stripped multilayer structures that have potential applications for photovoltaics and solar absorbers. An entire patterned device, which can include a transparent conductor, semiconductor absorber, and back contact, can be fabricated. Since our approach can also produce many copies of the patterned structure with high fidelity by reusing the template, a low-cost and high-throughput process in micro- and nanofabrication is provided that is useful for electronics, plasmonics, and nanophotonics.

  17. Deformation processes in refractory metals. Progress report, December 1, 1975--November 30, 1976

    International Nuclear Information System (INIS)

    Arey, R.W.; Boratto, F.; Wise, D.E.; Watson, P.G.; Reed-Hill, R.E.

    1976-01-01

    Two papers were published during the report period. Abstracts of these papers are included. Four others have been accepted for publication and are abstracted in included sections. In addition to this, Mr. Juan Donoso has published a dissertation which is summarized. A paper is presented which was prepared for presentation at the ''Interstitial Effects in Refractory Metals'' session of the Fall AIME meeting in Niagara Falls, New York. Other work currently under way is discussed, including new internal friction determinations of the diffusion coefficients of O and N in niobium and re-evaluation of the available relevant data in the literature. It is believed that the results of this study make it possible to rationalize apparent inconsistencies in the literature. Work on the static strain-aging in Ti is reported. A review of work on the effects of hydrogen on the yield point phenomena in niobium at the temperatures 273 and 193 0 K is presented along with transmission electron microscopy work on titanium aimed at obtaining a better insight into the causes of anomalous work hardening associated with dynamic strain-aging in this metal

  18. Influence of temperature and plasma composition on deuterium retention in refractory metals

    International Nuclear Information System (INIS)

    Alves, E.; Alves, L.C.; Barradas, N.P.; Mateus, R.; Carvalho, P.A.; Wright, G.M.

    2010-01-01

    Refractory materials are being considered potential candidates to build the first wall of the fusion reactor chamber. This work reports on the results of the study of tungsten and molybdenum metals exposed to high flux densities (∼10 24 D/m 2 s) and low temperature (T e ∼ 3 eV) deuterium plasmas in Pilot-PSI irradiation facility. The hydrogenic retention in poly-crystalline W and Mo targets was studied with 3 He nuclear reaction analyses (NRA). The NRA results clearly show a two-dimensional radial distribution of the deuterium with a minimum at the center and a maximum close to the edge. These distribution correlates well with the thermal profile of the sample surface, where a maximum of ∼1600 K was measured at the center decreasing to ∼1000 K in the edges. A maximum deuterium fluence retention of 5 x 10 15 D/cm 2 was measured. The values of the retained fractions ranging from 10 -5 to 10 -6 D retained /D incident were measured with thermal desorption spectroscopy (TDS) and compares well with IBA results. Moreover, the presence of C in the plasma and its co-deposition increases the D retention in the region where a C film is formed. Both NRA and TDS results show no clear dependence of retention on incident fluence suggesting the absence of plasma related traps in W under these conditions.

  19. Brazed graphite/refractory metal composites for first-wall protection elements

    Science.gov (United States)

    Šmid, I.; Croessmann, C. D.; Salmonson, J. C.; Whitley, J. B.; Kny, E.; Reheis, N.; Kneringer, G.; Nickel, H.

    1991-03-01

    The peak surface heat flux deposition on divertor elements of near term fusion devices is expected to exceed 10 MW/m 2. The needed reliability of brazed plasma interactive components, particularly under abnormal operating conditions with peak surface temperatures well beyond 1000°C, makes refractory metallic substrates and brazes with a high melting point very attractive. TZM, a high temperature alloy of molybdenum, and isotropic graphite, materials very closely matched in their thermal expansion, were brazed with four high-temperature brazes. The brazes used were Zr, 90Ni/10Ti, 90Cu/10Ti and 70Ag/27Cu/3Ti (nominal composition prior to brazing, wt%). The resulting composite tiles of 50 × 50 mm2 with a TZM thickness of 5 mm and a graphite thickness of 10 mm have been tested in high heat flux simulation for their thermal fatigue properties. Up to 600 loading cycles were carried out with an average heat flux of 10 MW/m 2 for 0.5 s pulses. The maximum surface temperature was 1100°C. In support of the experiment, the thermal response and temperature gradients of the samples were investigated using a finite element model.

  20. Brazed graphite/refractory metal composites for first-wall protection elements

    International Nuclear Information System (INIS)

    Smid, I.; Croessmann, C.D.; Salmonson, J.C.; Whitley, J.B.; Nickel, H.

    1991-01-01

    The peak surface heat flux deposition on divertor elements of near term fusion devices is expected to exceed 10 MW/m 2 . The needed reliability of brazed plasma interactive components, particularly under abnormal operating conditions with peak surface temperatures well beyond 1000deg C, makes refractory metallic substrates and brazes with a high melting point very attractive. TZM, a high temperature alloy of molybdenum, and isotropic graphite, materials very closely matched in their thermal expansion, were brazed with four high-temperature brazes. The brazes used were Zr, 90Ni/10Ti, 90Cu/10Ti and 70Ag/27Cu/3Ti (nominal composition prior to brazing, wt%). The resulting composite tiles of 50x50 mm 2 with a TZM thickness of 5 mm and a graphite thickness of 10 mm have been tested in high heat flux simulation for their thermal fatigue properties. Up to 600 loading cycles were carried out with an average heat flux of 10 MW/m 2 for 0.5 s pulses. The maximum surface temperature was 1100deg C. In support of the experiment, the thermal response and temperature gradients of the samples were investigated using a finite element model. (orig.)

  1. Brazed graphite/refractory metal composites for first-wall protection elements

    International Nuclear Information System (INIS)

    Smid, I.; Croessmann, C. D.; Salmonson, J. C.; Whitley, J. B.; Kny, E.; Reheis, N.; Kneringer, G.; Nickel, H.

    1995-01-01

    The peak surface heat flux deposition on divertor elements of near term fusion devices is expected to exceed 10 MW/m 2 . The needed reliability of brazed plasma interactive components, particularly under abnormal operating conditions with peak surface temperatures well beyond 1000 degree C, makes refractory metallic substrates and brazes with a high melting point very attractive. TZM, a high temperature alloy of molybdenum, and isotropic graphite, materials very closely matched in their thermal expansion, were brazed with four high-temperature brazes. The brazes used were Zr, 90Ni/10Ti, 90Cu/10Ti and 70Ag/27Cu/3Ti (nominal composition prior to brazing, wt%). The resulting composite tiles of 5O X 50 mm 2 with a TZM thickness of 5 mm and a graphite thickness of 10 mm have been tested in high heat flux simulation for their thermal fatigue properties. Up to 600 loading cycles were carried out with an average heat flux of 10 MW/m 2 for 0.5 s pulses. The maximum surface temperature was 1100 degree C. In support of the experiment, the thermal response and temperature gradients of the samples were investigated using a finite element model. (author)

  2. Brazed graphite/refractory metal composites for first wall protection elements

    International Nuclear Information System (INIS)

    Smid, I.; Croessmann, C. D.; Salmonson, J. C.; Whitley, J. B.; Kny, E.; Reheis, N; Kneringer, G.; Nickel, H.

    1995-01-01

    The peak surface heat flux deposition on divertor elements of near term fusion devices is expected to exceed 10 MW/m 2 . The needed reliability of brazed plasma interactive components, particularly under abnormal operating conditions with peak surface temperatures well beyond 1000 degree C, makes refractory metallic substrates and brazes with a high melting point very attractive. TZM, a high temperature alloy of molybdenum, and isotropic graphite, materials very closely matched in their thermal expansion, were brazed with four high-temperature brazes. The brazes used were Zr, 90Ni/10Ti, 90Cu/10Ti and 70Ag/27Cu/10Ti (nominal composition prior to brazing, wt%). The resulting composite tiles of 50 x 50 mm with a TZM thickness of 5 mm and a graphite thickness of 10 mm have been tested in high heat flux simulation for their thermal fatigue properties. Up to 600 loading cycles were carried out with the experimental parameters chosen to cover NET/ITER design specifications. In support of the experiment, the thermal response and temperature gradients of the samples were investigated using a finite element model. (author)

  3. Adherence of diamond films on refractory metal substrates for thermionic applications

    International Nuclear Information System (INIS)

    Tsao, B.H.; Ramalingam, M.L.; Adams, S.F.; Cloyd, J.S.

    1991-01-01

    Diamond films are currently being considered as electrical insulation material for application in the thermionic fuel element of a power producing nuclear reactor system. The function of the diamond insulator in this application is to electrically isolate the collector of each cell in the TFE from the coolant and outer sheath. Deposition of diamond films on plane surfaces of Si/SiO 2 have already been demonstrated to be quite effective. However, the diamond films on refractory metal surfaces tend to spall off in the process of deposition revealing an inefficient adherence characteristic between the film and the substrate. This paper is geared towards explaining this deficiency by way of selected experimentation and the use of analytical tools to predict uncertainties such as the mismatch in coefficient of expansion, micrographic study of the interface between the film and the substrate and X-ray diffraction spectra. The investigation of the adherence characteristics of several diamond films on Mo and Nb substrates revealed that there was an allowable stress that resulted in the formation of the critical thickness for the diamond film

  4. Investigations of reactions between pure refractory metals and light gases with the field ion microscope and atom probe

    International Nuclear Information System (INIS)

    Krautz, E.; Haiml, G.

    1989-01-01

    The initial stages of selected reactions of the refractory metals tungsten, niobium and tantalum with hydrogen, oxygen, nitrogen and methane have been studied with the field ion microscope in atomic resolution whereby the composition of single net planes converages and surface zones could absolutely be analyzed with the atom probe by using field desorption under defined conditions at low temperatures. 14 refs., 9 figs. (Author)

  5. Crystallography of refractory metal nuggets in carbonaceous chondrites: A transmission Kikuchi diffraction approach

    Science.gov (United States)

    Daly, Luke; Bland, Phil A.; Dyl, Kathryn A.; Forman, Lucy V.; Saxey, David W.; Reddy, Steven M.; Fougerouse, Denis; Rickard, William D. A.; Trimby, Patrick W.; Moody, Steve; Yang, Limei; Liu, Hongwei; Ringer, Simon P.; Saunders, Martin; Piazolo, Sandra

    2017-11-01

    Transmission Kikuchi diffraction (TKD) is a relatively new technique that is currently being developed for geological sample analysis. This technique utilises the transmission capabilities of a scanning electron microscope (SEM) to rapidly and accurately map the crystallographic and geochemical features of an electron transparent sample. TKD uses a similar methodology to traditional electron backscatter diffraction (EBSD), but is capable of achieving a much higher spatial resolution (5-10 nm) (Trimby, 2012; Trimby et al., 2014). Here we apply TKD to refractory metal nuggets (RMNs) which are micrometre to sub-micrometre metal alloys composed of highly siderophile elements (HSEs) found in primitive carbonaceous chondrite meteorites. TKD allows us to analyse RMNs in situ, enabling the characterisation of nanometre-scale variations in chemistry and crystallography, whilst preserving their spatial and crystallographic context. This provides a complete representation of each RMN, permitting detailed interpretation of their formation history. We present TKD analysis of five transmission electron microscopy (TEM) lamellae containing RMNs coupled with EBSD and TEM analyses. These analyses revealed textures and relationships not previously observed in RMNs. These textures indicate some RMNs experienced annealing, forming twins. Some RMNs also acted as nucleation centres, and formed immiscible metal-silicate fluids. In fact, each RMN analysed in this study had different crystallographic textures. These RMNs also had heterogeneous compositions, even between RMNs contained within the same inclusion, host phase and even separated by only a few nanometres. Some RMNs are also affected by secondary processes at low temperature causing exsolution of molybdenite. However, most RMNs had crystallographic textures indicating that the RMN formed prior to their host inclusion. TKD analyses reveal most RMNs have been affected by processing in the protoplanetary disk. Despite this

  6. Thermodynamic properties of heavy ion heated refractory metals; Thermodynamische Eigenschaften von schwerionengeheizten hochschmelzenden Metallen

    Energy Technology Data Exchange (ETDEWEB)

    Hug, Alexander

    2011-05-04

    Knowledge of basic physical properties of matter in high-energy-density (HED) states such as the equation-of-state (EOS) is of fundamental importance for various branches of basic and applied physics. However, such matter under extreme conditions of temperature and pressure - also called ''warm dense matter'' (WDM) - can only be generated in dynamic experiments employing the most powerful drivers. At the high temperature experimental area HHT of the GSI Helmholtzzentrum fuer Schwerionenforschung (Darmstadt, Germany), intense beams of energetic heavy ions are used for this purpose. The aim of this work is to study thermophysical properties of refractory metals in hot solid and liquid states by precise temperature measurements. In order to identify the melting plateau and to limit the maximum target temperature to the region of interest, relatively long (one microsecond) bunches of uranium and xenon ions have been used to heat initially solid samples. The intense ion beams were focused on a millimetre spot at the target in order to achieve uniform conditions. The temperature on the target surface was determined by analysing thermal radiation emitted from a 0.03 mm{sup 2} area at five different wavelengths. In order to obtain the physical temperature, one has to measure not only the thermal radiation but also the emissivity, ε(T,λ) of the target surface which is not known ab initio. For this purpose, a set-up for direct target reflection measurement was designed and embedded into the fast multichannel pyrometer system. The reflection signal provides the necessary information about modifications of the target surface properties during the interaction with the ion beam. Beside the pyrometric and reflection measurement set-ups, various hardware and software components of the data acquisition system for the heavy-ion beam driven experiments were substantially enhanced. The emissivity was also obtained by identifying the melting plateau and using the

  7. Electronic computer prediction of properties of binary refractory transition metal compounds on the base of their simplificated electronic structure

    International Nuclear Information System (INIS)

    Kutolin, S.A.; Kotyukov, V.I.

    1979-01-01

    An attempt is made to obtain calculation equations of macroscopic physico-chemical properties of transition metal refractory compounds (density, melting temperature, Debye characteristic temperature, microhardness, standard formation enthalpy, thermo-emf) using the method of the regression analysis. Apart from the compound composition the argument of the regression equation is the distribution of electron bands of d-transition metals, created by the energy electron distribution in the simplified zone structure of transition metals and approximated by Chebishev polynoms, by the position of Fermi energy on the map of distribution of electron band energy depending upon the value of quasi-impulse, multiple to the first, second and third Brillouin zone for transition metals. The maximum relative error of the regressions obtained as compared with the literary data is 15-20 rel.%

  8. Temperature gradient compatibility tests of some refractory metals and alloys in bismuth and bismuth--lithium solutions

    International Nuclear Information System (INIS)

    DiStefano, J.R.; Cavin, O.B.

    1976-11-01

    Quartz, T-111, and Mo thermal-convection loop tests were conducted at temperatures up to 700 0 C (100 0 C ΔT) to determine the compatibility of several refractory metals/alloys with bismuth and bismuth-lithium solutions for molten salt breeder reactor applications. Methods of evaluation included weight change measurements, metallographic examination, chemical and electron microprobe analysis, and mechanical properties tests. Molybdenum, T-111, and TA--10 percent W appear to be the most promising containment materials, while niobium and iron-based alloys are unacceptable

  9. Metal screen retention for thoron daughter free atoms and atoms attached to condensation nuclei

    International Nuclear Information System (INIS)

    Cash, W.; Webb, J.; Fitts, D.; Skrable, K.W.; Chabot, G.E.

    1978-01-01

    Metal support screens available in a 47 mm commercial filter holder (model F3052-4, available from Scientific Products, Bedford, MA) assembly were tested for retention of thoron daughter atoms and atoms attached to condensation nuclei as a function of the flow rate of the carrier air stream. Sources of Pb-212 were generated on the surface of a metal disk by exposing the disk to thoron emanation generated from a special preparation of Th-228. This source of Pb-212, in transient equilibrium with its daughters, was placed in a flow through chamber connected in series to two of the metal screens backed by a glass fiber filter. Most of the recoil product radioactivity emitted from the Pb-212 source and collected on the screens was due to single atoms of Tl-208, which is born by alpha decay of Bi-212 with a recoil energy of 116 keV. Some free atoms of Bi-212 were also observed. Alpha autoradiographs of Filter samples placed on the downstream side of the two metal screens gave proof of the existence of Pb-212 aggregates through their alpha star images. These aggregate recoil particles were found to have a much higher penetration through the screens than free atoms of Tl-208 and Bi-212. Penetration of Tl-208 atoms and ions decreased exponentially as the inverse of the carrier air flow rate. Penetration varied from 0.047 at 0.088 cfm to 0.661 at 2.47 cfm. Atoms of Pb-212 attached to condensation nuclei were obtained by passing thoron into a reaction chamber containing naturally occurring condensation nuclei from the laboratory. The retention for these attached species varied both as a function of the flow rate and the age of the aerosol. The maximum retention varied from 0.525% at 6.38 cfm to 3.5% at 0.636 cfm for respective delay times of 120 and 30 minutes post the introduction of the thoron into the reaction chamber. A system consisting of a single screen backed by a glass fiber filter may be used to obtain the numbers of radon or thoron daughter free atoms and attached

  10. SINTERED REFRACTORY TUNGSTEN ALLOYS. Gesinterte hochschmelzende wolframlegierungen

    Energy Technology Data Exchange (ETDEWEB)

    Kieffer, R.; Sedlatschek, K.; Braun, H.

    1971-12-15

    Dependence of the melting point of the refractory metals on their positions in the periodic system - alloys of tungsten with other refractory metals - sintering of the alloys - processing of the alloys - technological properties.

  11. Composite materials with metal oxide attached to lead chalcogenide nanocrystal quantum dots with linkers

    Science.gov (United States)

    Fuke, Nobuhiro; Koposov, Alexey Y; Sykora, Milan; Hoch, Laura

    2014-12-16

    Composite materials useful for devices such as photoelectrochemical solar cells include a substrate, a metal oxide film on the substrate, nanocrystalline quantum dots (NQDs) of lead sulfide, lead selenide, and lead telluride, and linkers that attach the NQDs to the metal oxide film. Suitable linkers preserve the 1s absorption peak of the NQDs. A suitable linker has a general structure A-B-C where A is a chemical group adapted for binding to a MO.sub.x and C is a chemical group adapted for binding to a NQD and B is a divalent, rigid, or semi-rigid organic spacer moiety. Other linkers that preserve the 1s absorption peak may also be used.

  12. Direct observation of shear–induced nanocrystal attachment and coalescence in CuZr-based metallic glasses: TEM investigation

    International Nuclear Information System (INIS)

    Hajlaoui, K.; Alrasheedi, Nashmi H.; Yavari, A.R.

    2016-01-01

    In-situ tensile straining tests were performed in a transmission electron microscope (TEM) to analyse the deformation processes in CuZr-based metallic glasses and to directly observe the phase transformation occurrence. We report evidence of shear induced coalescence of nanocrystals in the vicinity of deformed regions. Nanocrystals grow in shear bands, come into contact, being attached and progressively coalesce under applied shear stress. - Highlights: • In-situ tensile straining test in TEM was investigated on CuZr-Based metallic glass. • Strain induces nanocrystallization and subsequent attachment and coalescence of nanocrystals. • The coalescence of nanocrystals compensates strain softening in metallic glasses.

  13. Covered metal stent or multiple plastic stents for refractory pancreatic ductal strictures in chronic pancreatitis: a systematic review.

    Science.gov (United States)

    Shen, Yonghua; Liu, Mingdong; Chen, Min; Li, Yunhong; Lu, Ying; Zou, Xiaoping

    2014-01-01

    Refractory chronic pancreatitis has been proposed as a challenge for endoscopists following routine single plastic stenting. However, data on the efficacy and safety of further endoscopic stenting are still controversial. The current systematic review aimed to assess the efficacy and safety of placement of fully covered self-expandable metal stent (FCSEMS) and multiple plastic stents. Databases including MEDLINE, EMBASE, the Cochrane Library, CBM, CNKI, VIP, and WANFANG Database were used to search relevant trials. Published studies were assessed by using well-defined inclusion and exclusion criteria. The process was independently performed by two investigators. A total of 5 studies provided data of 80 patients. Forest plots and publication bias were not carried out because few studies were relevant and screened studies were all case series. The technical success rate was 100% both in placement of FCSEMS and multiple plastic stents. The functional success rate after placement of FCSEMS was 100%, followed by multiple plastic stents (94.7%). Complications occurred 26.2% after FCSEMS placement, which was not described in detail in multiple plastic stents. The stent migration rate was 8.2% for FCSEMS and 10.5% for multiple plastic stents. Reintervention rate was 9.8% for FCSEMS and 15.8% for multiple plastic stents. Pain improvement rate was 85.2% for FCSEMS and 84.2% for multiple plastic stents. FCSEMS appeared to be no significant difference with multiple plastic stents in treatment of refractory chronic pancreatitis. We need to develop more investigations. Copyright © 2014 IAP and EPC. Published by Elsevier B.V. All rights reserved.

  14. Improved oxidation resistance of group VB refractory metals by Al+ ion implantation

    International Nuclear Information System (INIS)

    Hampikian, J.M.

    1996-01-01

    Aluminum ion implantation of vanadium, niobium, and tantalum improved the metals' oxidation resistances at 500 C and 735 C. Implanted vanadium oxidized only to one-third the extent of unimplanted vanadium when exposed at 500 C to air. The oxidative weight gains of implanted niobium and tantalum proved negligible when measured at 500 C and for times sufficient to fully convert the untreated metals to their pentoxides. At 735 C, implantation of vanadium only slightly retarded its oxidation, while oxidative weight gains of niobium and tantalum were reduced by factors of 3 or more. Implanted niobium exhibited weight gain in direct proportion to oxidation time squared at 735 C. Microstructural examination of the metals implanted with selected fluences of the 180 kV aluminum ions showed the following. The solubility limit of aluminum is extended by implantation, the body centered cubic (bcc) phases being retained to ∼60 at. pct Al in all three metals. The highest fluence investigated, 2.4 x 10 22 ions/m 2 , produced an ∼400-nm layer of VAl 3 beneath the surface of vanadium, and ∼300-nm layers of an amorphous phase containing ∼70 at. pct Al beneath the niobium and tantalum surfaces. All three metals, implanted to this fluence and annealed at 600 C, contained tri-aluminides, intermetallic compounds known for their oxidation resistances. Specimens implanted to this fluence were thus selected for the oxidation measurements

  15. Deformation processes in refractory metals. Progress report, 1 December 1974--30 November 1975

    International Nuclear Information System (INIS)

    Donoso, J.R.; Reed-Hill, R.E.

    1975-01-01

    Work in progress is mostly concerned with the stress-strain behavior of niobium, as affected by dynamic strain aging. An investigation of the aging phenomena in nickel containing carbon as the major interstitial impurity was also conducted. Some aspects of the deformation behavior of the hexagonal metals titanium and zirconium still warrant investigation and are also being considered. (auth)

  16. Refractory metal superalloys: Design of yttrium aluminum garnet passivating niobium alloys

    Science.gov (United States)

    Bryan, David

    A systems-based approach, integrating computational modeling with experimental techniques to approach engineering problems in a time and cost efficient manner, was employed to design a Nb-based refractory superalloy for use at 1300°C. Ashby-type selection criteria for both thermodynamic and kinetic parameters were employed to identify a suitable protective oxide for Nb alloys. Yttrium aluminum garnet (YAG) was selected as the most promising candidate for its excellent combination of desirable properties. The alloy microstructural concept was based upon the gamma - gamma' nickel-based superalloys in which the multifunctional gamma' phase serves as both a creep strengthening dispersion and a source of reactive elements for oxide passivation. Candidate ternary Pd-Y-Al and Pt-Y-Al compounds were fabricated and characterized by XRD and DTA. Of the intermetallics studied, only PtYAl had a high enough melting point (1580°C) for use in an alloy operating at 1300°C. The alloy matrix design was based upon Wahl's extension of Wagner's criterion for protective oxidation, requiring a reduction of the product N ODO/DAl by 5 orders of magnitude relative to binary Nb-Al. A thermodynamic and kinetic analysis identified elements with large oxygen affinities as the most beneficial for reducing the magnitude of the quantity NOD O. Construction of a combined thermodynamic and mobility database identified increased Al solubility as the best approach for increasing D Al. Utilizing the thermodynamic and mobility databases, obtained from a combination of model alloys, oxidation experiments, and first principles calculations, theoretical designs predicted the large changes in solubility and transport parameters were achievable. Several prototype alloys were then fabricated and evaluated via oxidation tests at both 1300°C and 1100°C. YAG formation was demonstrated as part of multicomponent oxide scales in the alloys that exhibited the greatest reduction in oxidation rates. The oxidation

  17. Study and development of refractory coatings for metallic uranium fusion and evaporation

    International Nuclear Information System (INIS)

    Vasconcelos, Getulio de

    2004-01-01

    In melting process or evaporation of metallic uranium, the reaction with the crucible and the possible contamination of the molten metal should be avoided. This effect can be reduced using an inert and protective coating on the crucible walls. The selection of the coating should be based on the chemical inertia and the kinetic of the reaction products. By avoiding chemical reactions, the amount of impurities in the molten metal can be reduced, leading to an increased crucible lifetime. This work presents a comparative study among different crucible coatings used in the melting process of metallic uranium, at temperatures above its melting point. Samples of metallic uranium are melted in contact with different materials in a vacuum furnace. The reactions occur at a given temperature during a certain time interval; samples are then cooled down to room temperature. Finally, samples are characterized by optical and electronic microscopy, dispersive X-ray spectroscopy, surface roughness and X-ray diffraction. Samples preparation consists of polishing selected areas, and milling the reaction products originated from the corroded interfaces. The extent of the reactions is determined as a function of the temperature by optical microscopy and roughness analyses. The compositions of the reacted products are determined by Energy Dispersive Spectroscopy, and the phase changes by X-ray diffraction. The results indicate that alumina presented higher activation energy (39 kcal.mol -1 ) than magnesia (12 kcal.mol -1 ), otherwise, it is corroded faster. On the other hand, the alumina could be protected by a thick coating of titanium nitride, because no rection between titanium nitride and uranium was observed at temperatures near to 1700 K. After cooling to the room temperature, there is stress concentration between the graphite and the TiN layer, generating a compressive stress of 0,5 GPa. When uranium is deposited on the TiN, a tensile stress is generated in this new layer, which

  18. Comprehensive recovery of gold and base-metal sulfide minerals from a low-grade refractory ore

    Science.gov (United States)

    Li, Wen-juan; Liu, Shuang; Song, Yong-sheng; Wen, Jian-kang; Zhou, Gui-ying; Chen, Yong

    2016-12-01

    The comprehensive recovery of small amounts of valuable minerals such as gold and base-metal sulfide minerals from a low-grade refractory ore was investigated. The following treatment strategy was applied to a sample of this ore: gold flotation-gold concentrate leaching-lead and zinc flotation from the gold concentrate leaching residue. Closed-circuit trials of gold flotation yielded a gold concentrate that assayed at 40.23 g·t-1 Au with a recovery of 86.25%. The gold concentrate leaching rate was 98.76%. Two variants of lead-zinc flotation from the residue—preferential flotation of lead and zinc and bulk flotation of lead and zinc—were tested using the middling processing method. Foam from the reflotation was returned to the lead rougher flotation or lead-zinc bulk flotation, whereas middlings from reflotation were discarded. Sulfur concentrate was a byproduct. The combined strategy of flotation, leaching, and flotation is recommended for the treatment of this kind of ore.

  19. Bonding of Metal Orthodontic Attachments to Sandblasted Porcelain and Zirconia Surfaces

    Directory of Open Access Journals (Sweden)

    Amitoj S. Mehta

    2016-01-01

    Full Text Available This study evaluates tensile bond strength (TBS of metal orthodontic attachments to sandblasted feldspathic porcelain and zirconia with various bonding protocols. Thirty-six (36 feldspathic and 36 zirconia disc samples were prepared, glazed, embedded in acrylic blocks and sandblasted, and divided into three groups according to one or more of the following treatments: hydrofluoric acid 4% (HF, Porcelain Conditioner silane primer, Reliance Assure® primer, Reliance Assure plus® primer, and Z Prime™ plus zirconia primer. A round traction hook was bonded to each sample. Static tensile bond strength tests were performed in a universal testing machine and adhesive remnant index (ARI scoring was done using a digital camera. One-way ANOVA and Pearson chi-square tests were used to analyze TBS (MPa and ARI scores. No statistically significant mean differences were found in TBS among the different bonding protocols for feldspathic and zirconia, p values = 0.369 and 0.944, respectively. No statistically significant distribution of ARI scores was found among the levels of feldspathic, p value = 0.569. However, statistically significant distribution of ARI scores was found among the levels of zirconia, p value = 0.026. The study concluded that silanization following sandblasting resulted in tensile bond strengths comparable to other bonding protocols for feldspathic and zirconia surface.

  20. Mechanical and diffusion properties of refractory me--tal and alloy monocrystals

    International Nuclear Information System (INIS)

    Shinyaev, A.Ya.; Kopalejshvili, N.I.

    1977-01-01

    The temperature dependence of mechanical properties of single crystals Mo, W, Ta, Nb and of alloys Mo-Ta and Nb-Ta has been investigated from the point of view of diffusion processes. The curve of the dependence of the ultimate strength upon the temperature has shown four discontinuities corresponding to various stages of development of intercrystalline and volume diffusions. It is shown that for close-to-ideal solid solutions of Nb-Ta alloys the temperature dependence of the strength properties is the same as for pure metals. In case of appreciable deviations from ideal properties (system Mo-Ta), the drops in strength, due to volume diffusion, shift toward higher temperatures

  1. The flow stress of high-purity refractory body-centred cubic metals and its modification by atomic defects

    International Nuclear Information System (INIS)

    Seeger, A.

    1995-01-01

    The strong temperature and strain-rate dependence of the flow stress of high-purity refractory body-centred cubic metals has been shown to be an intrinsic property and is usually ascribed to a high Peierls barrier of a o left angle 111 right angle /2 screw dislocations. These barriers are overcome by the formation of kink pairs on the screw dislocations. The paper reports on recent, very complete flow-stress data on ultra-high purity Mo crystals obtained by two different experimental techniques and covering the temperature range 4 K to 460 K. The results are in accord with earlier work of Brunner and Diehl on α-Fe, who showed that below the so-called knee temperature, T K , three regimes in the temperature variation of the flow-stress should be distinguished. Two of them are fully accounted for by the same glide mechanism, namely elementary glide steps on {211} planes. The so-called upper bend separating these two regimes in an inherent feature of the theory of kink-pair formation and does not indicate a change in the glide mechanism. There is, however, strong evidence that the so-called lower bend, separating the range of {211} elementary glide steps from the low-temperature flow-stress regime, is due to a change in the glide mechanism. It is argued that at the lower bend the screw-dislocation cores undergo a ''first-order phase transition'' from a low-temperature configuration that allows glide of a given screw dislocation on any of its three {110} glide planes to a high-temperature configuration that can glide only on one definite {211} plane. Between T K and the lower-bend temperature, T, bcc metals may show the unique phenomena of alloy and irradiation softening. With regard to the latter phenomenon, Brunner and Diehl distinguish between ''primary'' and ''secondary'' softening. It is shown that alloy softening and the ''secondary irradiation softening'' of bcc metals may be explained by an ''overheating'' of the phase transition in the dislocation core. (orig./WL)

  2. Calorimetric measurements on refractory metals and alloys by means of electromagnetic levitation (Paper No. 42)

    International Nuclear Information System (INIS)

    Frohberg, M.G.; Betz, Gerhard

    1979-01-01

    Conventional calorimetric measurements for determining the enthalpy of solid and liquid metals or alloys have an upper temperature limit of around 1800-2000deg C. This limit is given by the thermal durability of the crucible material. To avoid these disadvantages, combination of levitation melting and drop calorimeter (levitation calorimetry) was performed in the last years. A critical analysis of the published works, however, shows that the temperature measurement and the determination of the temperature loss of the specimen during its falling period is still the problem. In consideration of these special circumstances, a levitation calorimeter was built in the Institute of Metallurgy of Technical University, Berlin. It consists of an evacuable levitation chamber. The levitation coil is connected via a transformator to a 25 KVA 500 KHz generator. The temperature of the specimen (weight 4-9 g) is measured and recorded by two different optical ways. The connected drop calorimeter is working isoperibolic. Its main part is a block of copper with a conical borehole for accepting the specimen. This copper block lies within a greater steel container which itself is in a water thermostat of a temperature 25deg C. In order to determine the calorimeter constant the calibration can be done by electrical means. To determine the temperature loss (5-10% error in enthalpy values) during the falling period between levitation coil and calorimeter many theoretical works and practical experiments have been done. First experiments on solid molybdenum in the temperature range of 2280-2750 K show a high accuracy of the measured values. Deviation from proposed ''best curve'' of Hultgreen is better than 0.3%. (auth.)

  3. Refractory vasculitis

    NARCIS (Netherlands)

    Rutgers, Bram; Kallenberg, Cees G. M.

    Refractory vasculitis occurs in 4-5% of patients with anti-neutrophil cytoplasmic antibody associated vasculitis (AAV). Differences between therapies used for refractory disease are mostly reflected in the percentages of complete and partial remissions, but also in the number of serious side

  4. Plasma deposition of refractories

    International Nuclear Information System (INIS)

    Kudinov, V.V.; Ivanov, V.M.

    1981-01-01

    The problems of deposition, testing and application of plasma coating of refractory metals and oxides are considered. The process fundamentals, various manufacturing procedures and equipment for their realization are described in detail. Coating materials are given (Al, Mg, Al 2 O 3 , ZrO 2 , MgAlO 4 ) which are used in reactor engineering and their designated purposes are shown [ru

  5. Compatibility of refractory materials with boiling sodium

    International Nuclear Information System (INIS)

    Meacham, S.A.

    1976-01-01

    The program employed to determine the compatibility of commercially available refractories with boiling sodium is described. The effects of impurities contained within the refractory material, and their relations with the refractory's physical stability are discussed. Also, since consideration of refractories for use as an insulating material within Liquid Metal Fast Breeder Reactor Plants (LMFBR's) is currently under investigation; recommendations, based upon this program, are presented

  6. Corrosion behavior of Al-Fe-sputtering-coated steel, high chromium steels, refractory metals and ceramics in high temperature Pb-Bi

    International Nuclear Information System (INIS)

    Abu Khalid, Rivai; Minoru, Takahashi

    2007-01-01

    Corrosion tests of Al-Fe-coated steel, high chromium steels, refractory metals and ceramics were carried out in high temperature Pb-Bi at 700 C degrees. Oxygen concentrations in this experiment were 6.8*10 -7 wt.% for Al-Fe-coated steels and 5*10 -6 wt.% for high chromium steels, refractory metals and ceramics. All specimens were immersed in molten Pb-Bi in a corrosion test pot for 1.000 hours. Coating was done with using the unbalanced magnetron sputtering (UBMS) technique to protect the steel from corrosion. Sputtering targets were Al and SUS-304. Al-Fe alloy was coated on STBA26 samples. The Al-Fe alloy-coated layer could be a good protection layer on the surface of steel. The whole of the Al-Fe-coated layer still remained on the base surface of specimen. No penetration of Pb-Bi into this layer and the matrix of the specimen. For high chromium steels i.e. SUS430 and Recloy10, the oxide layer formed in the early time could not prevent the penetration of Pb-Bi into the base of the steels. Refractory metals of tungsten (W) and molybdenum (Mo) had high corrosion resistance with no penetration of Pb-Bi into their matrix. Penetration of Pb-Bi into the matrix of niobium (Nb) was observed. Ceramic materials were SiC and Ti 3 SiC 2 . The ceramic materials of SiC and Ti 3 SiC 2 had high corrosion resistance with no penetration of Pb-Bi into their matrix. (authors)

  7. Use of refractory-metal alloys in the Next European Torus divertor design, and comparative study of mechanical properties after disruptive heat loads or brazing and ageing treatment

    International Nuclear Information System (INIS)

    Moons, Frans; Falbriard, Patricia; Nicolas, Guy; Faron, Robert

    1990-01-01

    A limited comparative study of ten refractory metals and alloys has been made to evaluate materials for use in the divertor element of the Next European Torus (NET). Tensile tests up to 800 0 C were performed on sintered molybdenum, wrought molybdenum, Z6 (Mo-ZrO 2 ), Mo-5Re, Mo-41Re, sintered tungsten, wrought tungsten, W-5Re, and W-26Re, in delivery state and after ageing for 10 days at 600 0 C; the 10 days of ageing simulated the integrated divertor lifetime. Slow bend tests were done from room temperature to 800 0 C and 600 0 C respectively on samples of refractory metal previously brazed to graphite or to copper; the brazing process was representative of part of the manufacturing process. Finally, impact tests up to 800 0 C were carried out on samples disposed to high-energy flux deposition of 3 or 15 MJ m -2 by laser; this was to simulate the energy deposition that might occur on the material during a plasma disruption. The resulting ranking of materials is of course criteria-dependent, but generally speaking Mo-41Re scored the best as 'engineering' material, followed by TZM. (author)

  8. Metal ion attachment to the matrix meso-tetrakis(pentafluorophenyl)porphyrin, related matrices and analytes: an experimental and theoretical study.

    Science.gov (United States)

    van Kampen, Jeroen J A; Luider, Theo M; Ruttink, Paul J A; Burgers, Peter C

    2009-11-01

    In a previous study [van Kampen et al. Analytical Chemistry 2006; 78: 5403], we found that meso-tetrakis (pentafluorophenyl)porphyrin (F20TPP), in combination with lithium salts, provides an efficient matrix to cationize small molecules by Li+ attachment and that this combination can be successfully applied to the quantitative analysis of drugs, such as antiretroviral compounds using matrix-assisted laser desorption ionization in conjunction with a time-of-flight analyzer (MALDI-TOF). In the present study, we further explore the mechanism of metal ion attachment to F20TPP and analytes by MALDI-FTMS(/MS). To this end, we have studied the interaction of F20TPP and analytes with various mono-, di- and trivalent metal ions (Li+, Na+, K+, Rb+, Cs+, Co2+, Cu2+, Zn2+, Fe2+, Fe3+ and Ga3+). For the alkali cations, we find that F20TPP forms complexes only with Li+ and Na+; in addition, model analyte molecules such as poly(ethyleneglycol)s, mixed with F20TPP and the alkali cations, also only form Li+ and Na+ adducts. This contrasts sharply with the commonly used matrix 2,5-dihydroxybenzoic acid, where analytes are most efficiently cationized by Na+ or K+. Reasons for this difference are delineated. Ab initio calculations on porphyrin itself reveal that even the smallest alkali cation, Li+, does not fit in the porphyrin cavity, but lies on top of it, pushing the 21H and 23 H hydrogen atoms out of and below the plane with concomitant bending of the porphyrin skeleton in the opposite direction, i.e. toward the cation. Thus, the Li+ ion is not effectively sequestered and is in fact exposed and thus accessible for donation to analyte molecules. Interaction of F20TPP with di- and trivalent metal ions leads to protoporphyrin-metal ions, where the metal ion is captured within the protoporphyrin dianion cavity. The most intense signal is obtained when F20TPP is reacted with CuCl2 and then subjected to laser ablation. This method presents an easy general route to study the metal

  9. X-points in the spectral emissivity of solid and liquid refractory transition metals measured by multichannel pyrometry. Discussion of the experimental method and physical interpretation

    International Nuclear Information System (INIS)

    Ronchi, C.; Hiernaut, J.P.; Hyland, G.J.

    1993-01-01

    The spectral emissivities of some refractory Transition metals (Hf, Mo, Nb, Re, V, W and Zr) have been measured from about 2500 K up to temperatures above the melting point T m . The experimental method adopted is based on multiwavelength pyrometric measurements, where the determination of the spectral emissivity is implicitly related to the evaluation of temperature through the radiation emission law and an assumed relationship between the spectral emissivity ε and the wavelength λ. Heating was produced with a pulsed laser in times of the order of 100 ms. A specially constructed pyrometer was used which enabled measurements at six different wavelengths to be carried out at time intervals of the order of 0.1 ms. A model for the evaluation of temperature and spectral emissivities has been developed and its limitations due to statistical and systematic errors are discussed. Our experiments confirm the existence of a unique wavelength, λ-x for each metal to which different ε λ -isotherms converge for λ x and from which they diverge for λ>λ x and at which ε λ is independent of T, and thus equal, in particular, to its value at T m , indicate that λ x is preserved through T m and reveal that at T m these metals are effectively 'grey'. Detailed theoretical investigations reveal that the occurrence of the λ x points is intimately connected with the particular T and λ dependences of the interband contribution to the imaginary part of the complex dielectric function entailed by specific features of the electronic band-structure of the Transition metals concerned. Finally, in connection with the 'grey' phenomenon at T m , it should be stressed that this is not found in the case of the Noble metals, although, like Transition metals, they exhibit λ x points, despite their quite different band-structures. (author). 56 refs., 8 figs., 5 tabs

  10. The production of a homogeneous and well-attached layer of carbon nanofibers on metal foils

    NARCIS (Netherlands)

    Pacheco Benito, Sergio; Lefferts, Leonardus

    2010-01-01

    Carbon nanofibers (CNFs) were deposited on metal foils including nickel (Ni), iron (Fe), cobalt (Co), stainless steel (Fe:Ni; 70:11 wt.%) and mumetal (Ni:Fe; 77:14 wt.%) by the decomposition of C2H4 at 600 °C. The effect of pretreatment and the addition of H2 on the rate of carbon formation, as well

  11. HIGHLY REFRACTORY CRUCIBLES OF STABILIZED ZIRCONIA FOR INDUCTION MELTING OF THE PLATINUM GROUP METALS, FABRICATED BY VIBROCASTING

    Directory of Open Access Journals (Sweden)

    V. V. Primachenko

    2012-01-01

    Full Text Available As the result of the studies at PJSC « UKRNIIO them. A.S.Berezhnogo» the technology and commercial production of crucibles from stabilized zirconia for the smelting of platinum group metals are develop

  12. HIGHLY REFRACTORY CRUCIBLES OF STABILIZED ZIRCONIA FOR INDUCTION MELTING OF THE PLATINUM GROUP METALS, FABRICATED BY VIBROCASTING

    OpenAIRE

    V. V. Primachenko; V. V. Martynenko; I. G. Szulik; I. A. Kushchenko

    2012-01-01

    As the result of the studies at PJSC « UKRNIIO them. A.S.Berezhnogo» the technology and commercial production of crucibles from stabilized zirconia for the smelting of platinum group metals are develop

  13. Temporary metallic stent placement in the treatment of refractory benign esophageal strictures: results and factors associated with outcome in 55 patients

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Hyoung; Kim, Kyung Rae; Shin, Ji Hoon; Lim, Jin-Oh [University of Ulsan College of Medicine, Asan Medical Center, Department of Radiology and Research Institute of Radiology, Seoul (Korea); Song, Ho-Young [University of Ulsan College of Medicine, Asan Medical Center, Department of Radiology and Research Institute of Radiology, Seoul (Korea)]|[University of Ulsan College of Medicine, Asan Medical Center, Department of Radiology, Seoul (Korea); Choi, Eugene K. [Weill Medical College of Cornell University, New York, NY (United States)

    2009-02-15

    The purpose of this study was to evaluate the effectiveness of temporary metallic stenting in 55 patients with treatment-resistant benign esophageal strictures and to identify factors associated with clinical outcomes. Under fluoroscopic guidance, covered retrievable stents were placed in 55 patients with benign esophageal strictures and were removed with retrieval hook 1 week to 6 months after placement. Stent placement was successful in all patients, and the mean dysphagia score was reduced from 2.8 to 1.3 (p<0.001). The most common complications were tissue hyperproliferation (31%), severe pain (24%), and stent migration (25%). During follow-up (mean: 38 months), recurrence of the stricture necessitating balloon dilation was seen in 38 (69%) of 55 patients. Maintained patency rates after temporary stenting at 1, 3, and 6 months and 1, 2, and 4 years were 58%, 43%, 38%, 33%, 26%, and 21%, respectively. In multivariate analysis, length (p=0.003) of the stricture was the only significant factor associated with maintained patency after temporary stenting. In conclusion, temporary metallic stenting for refractory benign esophageal strictures may be effective during the period of stent placement, but is disadvantaged by the high recurrence rates after stent removal, particularly in patients with a long length of stricture (>7cm). (orig.)

  14. Environmental and energy gains from using molten magnesium–sodium–potassium chlorides for electro-metallisation of refractory metal oxides

    Directory of Open Access Journals (Sweden)

    Wei Li

    2015-12-01

    Full Text Available The molten eutectic mixture of magnesium, sodium and potassium chlorides (MgCl2–NaCl–KCl has inappreciable solubility for oxide ions, and can help disengage a carbon anode from the oxide ions generated at a metal oxide cathode, and effectively avoid carbon dioxide formation. This “disengaging strategy” was successfully demonstrated in electro-reduction of solid oxides of zirconium and tantalum. It has led to significantly higher current efficiency (93%, and lower energy consumption (1.4 kW h kg−1 in electrolysis of tantalum oxide to tantalum metal compared to the conventional electrolysis in molten calcium chloride (e.g. 78% and 2.4 kW h/kg-Ta.

  15. Microstructure investigation of NiAl-Cr(Mo) interface in a directionally solidified NiAl-Cr(Mo) eutectic alloyed with refractory metal

    International Nuclear Information System (INIS)

    Chen, Y.X.; Cui, C.Y.; Guo, J.T.; Li, D.X.

    2004-01-01

    The microstructure of a directionally solidified NiAl-Cr(Mo) eutectic alloyed with refractory metal in as-processed and heat-treated states has been studied by means of scanning electron microscopy and high resolution electron microscopy (HREM). The microstructure of the NiAl-Cr(Mo) eutectic was characterized by lamellar Cr(Mo) phases embedded within NiAl matrix with common growth direction of . The interface between NiAl and lamellar Cr(Mo) did not have any transition layers. Misfit dislocations were observed at the NiAl-Cr(Mo) interface. In addition to lamellar Cr(Mo) phases, coherent Cr(Mo, Ni, Al) precipitates and NiAl precipitates were also observed in the NiAl matrix and lamellar Cr(Mo) phases, respectively. After hot isostatic pressing and heat treatment, the NiAl-Cr(Mo) interfaces became smooth and straight. Square array of misfit dislocations was directly observed at the (0 0 1) interface between NiAl and Cr(Mo, Ni, Al) precipitate. The configuration of misfit dislocation network showed a generally good agreement with prediction based on the geometric O-lattice model

  16. Concentrator bifacial crystalline silicon solar cells with multi-wire metallization attached to TCO layers using transparent conductive polymers

    Science.gov (United States)

    Untila, Gennady; Chebotareva, Alla; Kost, Tatiana; Salazkin, Sergei; Shaposhnikova, Vera; Shvarts, Maxim

    2017-09-01

    Replacing expensive silver with inexpensive copper for the metallization of silicon wafer solar cells can lead to substantial reductions in material costs associated with cell production. A promising approach is the use of multi-wire design. This technology uses many wires in the place of busbars, and the copper wires are "soldered" during the low-temperature lamination process to the fingers (printed or plated) or to the transparent conductive oxide (TCO) layer, e.g. in the case of the α-Si/c-Si heterojunction cells. Here we describe a solar cell design in which wires are attached to TCO layers using transparent conductive polymer (TCP) films. To this end, we have synthesized a number of thermoplastics, poly(arylene ether ketone) copolymers (co-PAEKs), containing phthalide in their main chain. The fraction of phthalide-containing units in the copolymers was p = 3, 5, 15, and 50 mol %. With increasing p, the peak strain temperature of the co-PAEKs rises from 205 to 290 °C and their optical band gap and refractive index increase from 3.12 to 3.15 eV and from 1.6 to 1.614, respectively. The copolymers have a negligible absorption coefficient in the wavelength range 400- 1100 nm. When exposed to an excess pressure of 1 atm or above, co-PAEK films less than 30 µm in thickness undergo a transition from a dielectric to a conductive state. The resistivity (ρC) of wire/TCP/TCO (ITO = In2O3:Sn and IFO = In2O3:F) contacts ranges from 0.37 to 1.43 mΩ cm2. The polymer with the highest phthalide content (p = 50 mol %) has the lowest ρC. The average work of adhesion per unit area determined by pulling off the wires from the polymer surface depends on both the phthalide content of the co-PAEKs and their reduced viscosity, ranging from 14.3 to 43.5 N/cm. The highest value was obtained for the co-PAEK with p = 50 mol %. We have fabricated low-concentration bifacial IFO/(n+pp+)Cz-Si/ITO solar cells with a wire contact grid attached to IFO and ITO using a co-PAEK film. The

  17. Grain size engineering of bcc refractory metals: Top-down and bottom-up-Application to tungsten

    International Nuclear Information System (INIS)

    Kecskes, L.J.; Cho, K.C.; Dowding, R.J.; Schuster, B.E.; Valiev, R.Z.; Wei, Q.

    2007-01-01

    We have used two general methodologies for the production of ultrafine grained (UFG) and nanocrystalline (NC) tungsten (W) metal samples: top-down and bottom-up. In the first, Equal channel angular extrusion (ECAE), coupled with warm rolling has been used to fabricate UFG W, and high pressure torsion (HPT) was used to fabricate NC W. We demonstrate an abrupt shift in the deformation mechanism, particularly under dynamic compressive loading, in UFG and NC W. This novel deformation mechanism, a dramatic transition from a uniform deformation mode to that of localized shearing, is shared by other UFG and NC body-centerd cubic (BCC) metals. We have also conducted a series of bottom-up experiments to consolidate powdered UFG W precursors into solid bodies. The bottom-up approach relies on rapid, high-temperature consolidation, specifically designed for UFG and NC W powders. The mechanical property results from the top-down UFG and NC W were used as minimum property benchmarks to guide and design the experimental protocols and parameters for use in the bottom-up procedures. Preliminary results, showing rapid grain growth during the consolidation cycle, did not achieve full density in the W samples. Further development of high-purity W nanopowders and appropriate grain-growth inhibitors (e.g., Zener pinning) will be required to successfully produce bulk-sized UFG and NC W samples

  18. Frontier molecular orbitals of a single molecule adsorbed on thin insulating films supported by a metal substrate: electron and hole attachment energies.

    Science.gov (United States)

    Scivetti, Iván; Persson, Mats

    2017-09-06

    We present calculations of vertical electron and hole attachment energies to the frontier orbitals of a pentacene molecule absorbed on multi-layer sodium chloride films supported by a copper substrate using a simplified density functional theory (DFT) method. The adsorbate and the film are treated fully within DFT, whereas the metal is treated implicitly by a perfect conductor model. We find that the computed energy gap between the highest and lowest unoccupied molecular orbitals-HOMO and LUMO -from the vertical attachment energies increases with the thickness of the insulating film, in agreement with experiments. This increase of the gap can be rationalised in a simple dielectric model with parameters determined from DFT calculations and is found to be dominated by the image interaction with the metal. We find, however, that this simplified model overestimates the downward shift of the energy gap in the limit of an infinitely thick film.

  19. Structure, preparation and properties of refractory compounds and systems

    International Nuclear Information System (INIS)

    Holleck, H.; Thuemmler, F.

    1977-01-01

    At the beginning of this report the possibilities of hardness optimization of refractory carbides are generally discussed. Three papers deal with TaC-basis refractories and hard metals. In particular, carbides with very low nonmetal/metal ratios and composites with hard phases formed by decomposition of tantalum carbonitrides are discussed. Another contribution reports investigations concerning the influence of the microstructure on the hardness of polycristaline mixed carbides. In a series of four papers, results are presented on the work of optimization conventional WC hard metals by introduction of a Fe,Co,Ni-binder: The influence of composition, carbon content and sintering conditions, as well as the wetting behaviour between carbides and binder metals are discussed. Phase relations in the refractory nitride and refractory nitride-binder metal systems as well as phase stabilities of ordered transition metal phases are reported in three papers, fundamental in character. Finally, the work concerning chemical analysis of refractory systems is described. (orig.) [de

  20. The attachment of metal-chelating groups to proteins: tagging of albumin by diazonium coupling and use of the products as radiopharmaceuticals

    International Nuclear Information System (INIS)

    Leung, C.S.H.; Meares, C.F.; Goodwin, D.A.

    1978-01-01

    The ability to attach firmly chelated metal ions or powerful chelating agents to sites on biological molecules can enhance the utility of a number of physical techniques now used in the study of biological systems. A 'bifunctional' chelating agent, containing both an EDTA group and a diazonium group, has been prepared and coupled to human serum albumin. The extent of labeling under various conditions and the amino-acid sidechains labeled have been investigated. The reaction of protein-bound chelating groups with added metal ions has been studied, with the finding that only about 40-50% of these groups are available to bind metal ions. Proteolysis of the products leads to recovery of full metal-binding capacity. Properties of the products in vivo are discussed. (author)

  1. Deformation processes in refractory metals

    International Nuclear Information System (INIS)

    Beckerman, L.P.; Boratto, F.J.M.; Watson, P.G.; Reed-Hill, R.E.

    1977-01-01

    A report is presented of yield point return studies on alloys of niobium containing both oxygen and hydrogen. Here it has been observed that hydrogen has a complex effect on both the kinetics and energetics of the oxygen yield point return in niobium. Work in the area of slow strain-rate embrittlement of oxygen by niobium and its relation to dynamic strain-aging is described, along with data that has been obtained for the diffusion of oxygen and nitrogen in tantalum. They compliment similar data already published on the diffusion of oxygen and nitrogen in both niobium and vanadium. Finally, a report of the preliminary work of a study of the effects of hydrogen on both slow strain-rate embrittlement and dynamic strain aging in vanadium is presented. Because the embrittling effect of hydrogen can seriously reduce the tensile ductility it is not possible to study most aspects of dynamic strain aging using tension tests. Compression tests on the other hand do not suffer from this problem

  2. Deformation processes in refractory metals

    Energy Technology Data Exchange (ETDEWEB)

    Beckerman, L.P.; Boratto, F.J.M.; Watson, P.G.; Reed-Hill, R.E.

    1977-01-01

    A report is presented of yield point return studies on alloys of niobium containing both oxygen and hydrogen. Here it has been observed that hydrogen has a complex effect on both the kinetics and energetics of the oxygen yield point return in niobium. Work in the area of slow strain-rate embrittlement of oxygen by niobium and its relation to dynamic strain-aging is described, along with data that has been obtained for the diffusion of oxygen and nitrogen in tantalum. They compliment similar data already published on the diffusion of oxygen and nitrogen in both niobium and vanadium. Finally, a report of the preliminary work of a study of the effects of hydrogen on both slow strain-rate embrittlement and dynamic strain aging in vanadium is presented. Because the embrittling effect of hydrogen can seriously reduce the tensile ductility it is not possible to study most aspects of dynamic strain aging using tension tests. Compression tests on the other hand do not suffer from this problem.

  3. A non-randomized study in consecutive patients with postcholecystectomy refractory biliary leaks who were managed endoscopically with the use of multiple plastic stents or fully covered self-expandable metal stents (with videos).

    Science.gov (United States)

    Canena, Jorge; Liberato, Manuel; Meireles, Liliane; Marques, Inês; Romão, Carlos; Coutinho, António Pereira; Neves, Beatriz Costa; Veiga, Pedro Mota

    2015-07-01

    Endoscopic management of postcholecystectomy biliary leaks is widely accepted as the treatment of choice. However, refractory biliary leaks after a combination of biliary sphincterotomy and the placement of a large-bore (10F) plastic stent can occur, and the optimal rescue endotherapy for this situation is unclear. To compare the clinical effectiveness of the use of a fully covered self-expandable metal stent (FCSEMS) with the placement of multiple plastic stents (MPS) for the treatment of postcholecystectomy refractory biliary leaks. Prospective study. Two tertiary-care referral academic centers and one general district hospital. Forty consecutive patients with refractory biliary leaks who underwent endoscopic management. Temporary placement of MPS (n = 20) or FCSEMSs (n = 20). Clinical outcomes of endotherapy as well as the technical success, adverse events, need for reinterventions, and prognostic factors for clinical success. Endotherapy was possible in all patients. After endotherapy, closure of the leak was accomplished in 13 patients (65%) who received MPS and in 20 patients (100%) who received FCSEMSs (P = .004). The Kaplan-Meier (log-rank) leak-free survival analysis showed a statistically significant difference between the 2 patient populations (χ(2) [1] = 8.30; P stents (P = .024), a plastic stent diameter <20F (P = .006), and a high-grade biliary leak (P = .015) were shown to be significant predictors of treatment failure with MPS. The 7 patients in whom placement of MPS failed were retreated with FCSEMSs, resulting in closure of the leaks in all cases. Non-randomized design. In our series, the results of the temporary placement of FCSEMSs for postcholecystectomy refractory biliary leaks were superior to those from the use of MPS. A randomized study is needed to confirm our results before further recommendations. Copyright © 2015 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

  4. High alumina refractories

    International Nuclear Information System (INIS)

    Simao, L.C.; Lopes, A.B.; Galvao Filho, N.B.; Souza, R.B. de

    1989-01-01

    High alumina refractories with 92 to 96.5% Al 2 O 3 were produced using brown and white fused as aggregate. Those refractories present only alumina-α and mullite as crystalline mineralogical phase. Other physical and chemical characteristics are similar to the ones found in refractories produced in Brazil, Japan and U.S.A. The most important physical and chemical tests used for the characterization of the raw materials and refractories, complemented by those realized at high temperatures, plus X-ray Difractometry and optical microscopy are presented, besides the refractory formulation and main parameters of production [pt

  5. Supersonic pulsed free-jet of atoms and molecules of refractory metals: laser induced fluorescence spectroscopic studies on zirconium atoms and zirconium oxide molecules

    International Nuclear Information System (INIS)

    Nakhale, S.G.

    2004-11-01

    The experimental setup for generating supersonic pulsed free-jet containing atoms and molecules of refractory nature has been built. The technique of laser vaporization in conjunction with supersonic cooling is used to generate these species. The cooled atoms and molecules in supersonic free-jet are probed by laser induced fluorescence spectroscopy. In particular, the technique has been used to perform low-resolution laser induced fluorescence spectroscopy, limited by laser linewidth, on cold Zr atoms and ZrO molecules. The translational temperatures of ∼ 26.5 K and the rotational temperatures of ∼ 81 K have been achieved. It is possible to achieve the Doppler width of few tens of MHz allowing it to perform high-resolution spectroscopy on these atomic and molecular species. Also because of low rotational temperature of molecules the spectral congestion is greatly reduced. In general, this technique can be applied to perform spectroscopy on atoms and molecules of refractory nature. (author)

  6. Apparatus for connecting an element attached to a metallic wire to an interior tube in a core drill

    Energy Technology Data Exchange (ETDEWEB)

    1970-04-17

    A locking device consists of at least one lever pivotable around an axis transversal to the axis of the core drill and mounted on the upper end of the core tube. A first arm oriented upward is intended to pivot during lowering of the wire line and to engage on the core tube, so that the core tube can be lifted by the wire line. A second arm prevents lifting of the core tube during drilling. The second arm also releases the core tube, after the wire line has been firmly attached and locked onto the core tube.

  7. Proceedings of the Conference on Refractory Alloying Elements in Superalloys

    International Nuclear Information System (INIS)

    1984-01-01

    Some papers about the use of refractory metals in superalloys are presented. Mechanical properties, thermodynamics properties, use for nuclear fuels and corrosion resistance of those alloys are studied. (E.G.) [pt

  8. Improvements in or relating to refractory materials

    International Nuclear Information System (INIS)

    Peckett, J.W.A.

    1980-01-01

    A process is described for the production of a refractory material which includes heating an intermediate material containing carbon to cause a thermally induced reaction involving carbon in the intermediate material, wherein the intermediate material has been produced by heating a shaped gel precipitated gel, and the carbon in the intermediate material for participating in the thermally induced reaction has been produced from a gelling agent, or a derivative thereof, incorporated in the gel during gel precipitation. As examples, the refractory material may comprise uranium/plutonium oxide, or uranium/plutonium carbide, or thorium/uranium carbide, or tungsten carbide, or tungsten carbide/cobalt metal. (author)

  9. Statistical experimental design for refractory coatings

    International Nuclear Information System (INIS)

    McKinnon, J.A.; Standard, O.C.

    2000-01-01

    The production of refractory coatings on metal casting moulds is critically dependent on the development of suitable rheological characteristics, such as viscosity and thixotropy, in the initial coating slurry. In this paper, the basic concepts of mixture design and analysis are applied to the formulation of a refractory coating, with illustration by a worked example. Experimental data of coating viscosity versus composition are fitted to a statistical model to obtain a reliable method of predicting the optimal formulation of the coating. Copyright (2000) The Australian Ceramic Society

  10. Refractory bin for burning

    Energy Technology Data Exchange (ETDEWEB)

    McPherson, D.L.; McPherson, T.L.

    1989-12-26

    This patent describes a refractory bin. It has a generally rectangular horizontal cross sectional configuration. It has wall structures each comprising an upper and a lower pair of elongated horizontal vertically spaced generally parallel support beams each having a vertical flange defining a support edge along its upper surface, a first generally rectangular refractory panel arranged with its lower edge at the bottom of the bin and with its outer surface in flat face contacting relation with the vertical flanges of the lower pair of support beams, a plurality of brackets each having a horizontal part and a vertical part and being secured to the outer surface of the first refractory panel.

  11. Refractoriness in human atria

    DEFF Research Database (Denmark)

    Skibsbye, Lasse; Jespersen, Thomas; Christ, Torsten

    2016-01-01

    BACKGROUND: Refractoriness of cardiac cells limits maximum frequency of electrical activity and protects the heart from tonic contractions. Short refractory periods support major arrhythmogenic substrates and augmentation of refractoriness is therefore seen as a main mechanism of antiarrhythmic...... drugs. Cardiomyocyte excitability depends on availability of sodium channels, which involves both time- and voltage-dependent recovery from inactivation. This study therefore aims to characterise how sodium channel inactivation affects refractoriness in human atria. METHODS AND RESULTS: Steady......-state activation and inactivation parameters of sodium channels measured in vitro in isolated human atrial cardiomyocytes were used to parameterise a mathematical human atrial cell model. Action potential data were acquired from human atrial trabeculae of patients in either sinus rhythm or chronic atrial...

  12. Colectomy for refractory constipation

    DEFF Research Database (Denmark)

    Raahave, Dennis; Loud, Franck Bjørn; Christensen, Elsebeth

    2010-01-01

    OBJECTIVE: This study evaluated the type of colectomy, postoperative complications, functional results, and satisfaction in patients with constipation refractory to conservative therapy. Further, colonic transit time (CTT), faecal load (coprostasis), and colon length (redundancies) were compared ...

  13. Typical corrosion of alumina refractory in aluminum reflow oven

    International Nuclear Information System (INIS)

    Baldo, Jaoa B.

    2014-01-01

    The refractory linings of furnaces for secondary melting of aluminum, are exposed to intense attack by the molten metal. This occurs, because molten aluminum has a strong reducing power over the refractory oxide components, particularly Fe 2 O 3 , SiO 2 and TiO 2 . In this work, based on X-ray diffraction and scanning electron microscopy, it is presented a post mortem study of the mechanisms that lead to a premature wear of a 80% Al2O3 chemically bonded refractory bricks, used in the metal line of an aluminum re-melting furnace. The SEM analysis demonstrated that the oxides SiO 2 and TiO 2 contained in the refractory were reduced and transformed into their metallic elements causing an intense structural spalling. (author)

  14. Modern materials based on refractory compounds

    International Nuclear Information System (INIS)

    Kosolapova, T.Ya.

    1979-01-01

    Discussed are the existing methods for synthesizing powders of binary refractory compounds and high-productivity techniques which hold promise as regards the manufacture of highly disperse and pure powders. Plasmochemical synthesis is shown to be an effective method for obtaining practically all carbides, nitrides and borides. A description is given of three main methods for obtaining single crystals of refractory compounds (TiN, TiC, ZrC, ZrB 2 , NbC) fairly perfect in structure and composition. These processes include deposition from vapour-gas phase, melting in arc plasma and crystallization from solutions in metallic melts. The advantages have been shown of the self-propagating high-temperature synthesis of refractory compounds, ensuring the manufacture of products, close in composition to stoichiometric ones simultaneously with forming of items. Mechanical, thermal, abrasive, and resistive characteristics of the above materials are presented

  15. Refractory Materials for Flame Deflector Protection System Corrosion Control: Refractory Ceramics Literature Survey

    Science.gov (United States)

    Calle, Luz Marina; Hintze, Paul E.; Parlier, Christopher R.; Curran, Jerome P.; Kolody, Mark; Perusich, Stephen; Whitten, Mary C.; Trejo, David; Zidek, Jason; Sampson, Jeffrey W.; hide

    2009-01-01

    Ceramics can be defmed as a material consisting of hard brittle properties produced from inorganic and nonmetallic minerals made by firing at high temperatures. These materials are compounds between metallic and nonmetallic elements and are either totally ionic, or predominately ionic but having some covalent character. This definition allows for a large range of materials, not all applicable to refractory applications. As this report is focused on potential ceramic materials for high temperature, aggressive exposure applications, the ceramics reviewed as part of this report will focus on refractory ceramics specifically designed and used for these applications. Ceramic materials consist of a wide variety of products. Callister (2000) 1 characterized ceramic materials into six classifications: glasses, clay products, refractories, cements, abrasives, and advanced ceramics. Figure 1 shows this classification system. This review will focus mainly on refractory ceramics and cements as in general, the other classifications are neither applicable nor economical for use in large structures such as the flame trench. Although much work has been done in advanced ceramics over the past decade or so, these materials are likely cost prohibitive and would have to be fabricated off-site, transported to the NASA facilities, and installed, which make these even less feasible. Although the authors reviewed the literature on advanced ceramic refractories 2 center dot 3 center dot 4 center dot 5 center dot 6 center dot 7 center dot 8 center dot 9 center dot 10 center dot 11 center dot 12 after the review it was concluded that these materials should not be ' the focus of this report. A review is in progress on materials and systems for prefabricated refractory ceramic panels, but this review is focusing more on typical refractory materials for prefabricated systems, which could make the system more economically feasible. Refractory ceramics are used for a wide variety of applications

  16. Metal/graphite - composites in fusion engineering

    International Nuclear Information System (INIS)

    Staffler, R.; Kneringer, G.; Kny, E.; Reheis, N.

    1989-01-01

    Metal/graphite composites have been well known in medical industry for many years. X-ray tubes used in modern radiography, particularly in computerized tomography are equipped with rotating targets able to absorb a maximum of heat in a given time. Modern rotating targets consist of a refractory metal/graphite composite. Today the use of graphite as a plasma facing material is one predominant concept in fusion engineering. Depending on the thermal load, the graphite components have to be directly cooled (i.e. divertor plates) or inertially cooled (i.e. firstwall tiles). In case of direct cooling a metallurgical joining such as high temperature brazing between graphite and a metallic cooling structure shows the most promising results /1/. Inertially cooled graphite tiles have to be joined to a metallic backing plate in order to get a stable attachment to the supporting structure. The main requirements on the metallic partner of a metal/graphite composite used in the first wall area are: high melting point, high thermal strength, high thermal conductivity, low vapor pressure and a thermal expansion matching that of graphite. These properties are typical for the refractory metals such as molybdenum, tungsten and their alloys. 4 refs., 13 figs., 1 tab

  17. Metal/graphite - composites in fusion engineering

    International Nuclear Information System (INIS)

    Staffler, R.; Kneringer, G.; Kny, E.; Reheis, N.

    1995-01-01

    Metal/graphite composites have been well known in medical industry for many years. X-ray tubes used in modern radiography, particulary in computerized tomography are equipped with rotating targets able to absorb a maximum of heat in a given time. Modern rotating targets consist of a refractory metal/graphite composite. Today the use of graphite as a plasma facing material is one predominant concept in fusion engineering. Depending on the thermal load, the graphite components have to be directly cooled (i.e. divertor plates) or inertially cooled (i.e. firstwall tiles). In case of direct cooling a metallurgical joining such as high temperature brazing between graphite and a metalic cooling structure shows the most promising results /1/. Inertially cooled graphite tiles have to be joined to a metallic backing plate in order to get a stable attachment to the supporting structure. The main requirements on the metallic partner of a metal/graphite composite and in the first wall area are: high melting point, high thermal strength, high thermal conductivity, low vapour pressure and a thermal expansion matching that of graphite. These properties are typical for the refractory metals such as molybdenum, tungsten and their alloys. (author)

  18. High-Density Infrared Surface Treatments of Refractories

    Energy Technology Data Exchange (ETDEWEB)

    Tiegs, T.N.

    2005-03-31

    Refractory materials play a crucial role in all energy-intensive industries and are truly a crosscutting technology for the Industries of the Future (IOF). One of the major mechanisms for the degradation of refractories and a general decrease in their performance has been the penetration and corrosion by molten metals or glass. Methods and materials that would reduce the penetration, wetting, and corrosive chemistry would significantly improve refractory performance and also maintain the quality of the processed liquid, be it metal or glass. This report presents the results of an R&D project aimed at investigating the use of high-density infrared (HDI) heating to surface treat refractories to improve their performance. The project was a joint effort between Oak Ridge National Laboratory (ORNL) and the University of Missouri-Rolla (UMR). HDI is capable of heating the near-surface region of materials to very high temperatures where sintering, diffusion, and melting can occur. The intended benefits of HDI processing of refractories were to (1) reduce surface porosity (by essentially sealing the surface to prevent liquid penetration), (2) allow surface chemistry changes to be performed by bonding an adherent coating onto the underlying refractory (in order to inhibit wetting and/or improve corrosion resistance), and (3) produce noncontact refractories with high-emissivity surface coatings.

  19. Super Refractory Status Epilepticus

    African Journals Online (AJOL)

    user

    et al did retrospective cohort study from 1 January st. 1994 to 31 March 1998 at Presbyterian Medical. Centre in Columbia, to determine the frequency, risk factors and impact on the outcome of RSE. They found out that 69% of seizures recurred after. Key Words: Super refractory status epilepticus, Zambia. Medical Journal of ...

  20. Study and development of refractory coatings for metallic uranium fusion and evaporation; Estudo e desenvolvimento de suportes refratarios para a fusao e a evaporacao de uranio metalico

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Getulio de

    2004-07-01

    In melting process or evaporation of metallic uranium, the reaction with the crucible and the possible contamination of the molten metal should be avoided. This effect can be reduced using an inert and protective coating on the crucible walls. The selection of the coating should be based on the chemical inertia and the kinetic of the reaction products. By avoiding chemical reactions, the amount of impurities in the molten metal can be reduced, leading to an increased crucible lifetime. This work presents a comparative study among different crucible coatings used in the melting process of metallic uranium, at temperatures above its melting point. Samples of metallic uranium are melted in contact with different materials in a vacuum furnace. The reactions occur at a given temperature during a certain time interval; samples are then cooled down to room temperature. Finally, samples are characterized by optical and electronic microscopy, dispersive X-ray spectroscopy, surface roughness and X-ray diffraction. Samples preparation consists of polishing selected areas, and milling the reaction products originated from the corroded interfaces. The extent of the reactions is determined as a function of the temperature by optical microscopy and roughness analyses. The compositions of the reacted products are determined by Energy Dispersive Spectroscopy, and the phase changes by X-ray diffraction. The results indicate that alumina presented higher activation energy (39 kcal.mol{sup -1}) than magnesia (12 kcal.mol{sup -1}), otherwise, it is corroded faster. On the other hand, the alumina could be protected by a thick coating of titanium nitride, because no rection between titanium nitride and uranium was observed at temperatures near to 1700 K. After cooling to the room temperature, there is stress concentration between the graphite and the TiN layer, generating a compressive stress of 0,5 GPa. When uranium is deposited on the TiN, a tensile stress is generated in this new

  1. Plasma induced material defects and threshold values for thermal loads in high temperature resistant alloys and in refractory metals for first wall application in fusion reactors

    International Nuclear Information System (INIS)

    Bolt, H.; Hoven, H.; Kny, E.; Koizlik, K.; Linke, J.; Nickel, H.; Wallura, E.

    1986-10-01

    Materials for the application in the first wall of fusion reactors of the tokamak type are subjected to pulsed heat fluxes which range from some 0.5 MW m -2 to 10 MW m -2 during normal plasma operation, and which can exceed 1000 MW m -2 during total plasma disruptions. The structural defects and material fatigue caused by this types of plasma wall interaction are investigated and the results are plotted in threshold loading curves. Additionally, the results are, as far as possible, compared with quantitative, theoretical calculations. These procedures allow a semiquantitative evaluation of the applicability of the mentioned metals in the first wall of fusion reactors. (orig.) [de

  2. Colectomy for refractory constipation

    DEFF Research Database (Denmark)

    Raahave, Dennis; Loud, Franck Bjørn; Christensen, Elsebeth

    2010-01-01

    OBJECTIVE: This study evaluated the type of colectomy, postoperative complications, functional results, and satisfaction in patients with constipation refractory to conservative therapy. Further, colonic transit time (CTT), faecal load (coprostasis), and colon length (redundancies) were compared...... had at hemicolectomy, 11 patients a subtotal colectomy and 3 patients an ileostomy. Two patients had an anastomotic leak and one died. In 11 patients, further surgery was necessary, because of recurrent constipation. Abdominal pain disappeared and defecation patterns improved significantly to 1-4 per...

  3. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  4. Refractory status epilepticus

    Directory of Open Access Journals (Sweden)

    Sanjay P Singh

    2014-01-01

    Full Text Available Refractory status epilepticus is a potentially life-threatening medical emergency. It requires early diagnosis and treatment. There is a lack of consensus upon its semantic definition of whether it is status epilepticus that continues despite treatment with benzodiazepine and one antiepileptic medication (AED, i.e., Lorazepam + phenytoin. Others regard refractory status epilepticus as failure of benzodiazepine and 2 antiepileptic medications, i.e., Lorazepam + phenytoin + phenobarb. Up to 30% patients in SE fail to respond to two antiepileptic drugs (AEDs and 15% continue to have seizure activity despite use of three drugs. Mechanisms that have made the treatment even more challenging are GABA-R that is internalized during status epilepticus and upregulation of multidrug transporter proteins. All patients of refractory status epilepticus require continuous EEG monitoring. There are three main agents used in the treatment of RSE. These include pentobarbital or thiopental, midazolam and propofol. RSE was shown to result in mortality in 35% cases, 39.13% of patients were left with severe neurological deficits, while another 13% had mild neurological deficits.

  5. Refractory status epilepticus

    Science.gov (United States)

    Singh, Sanjay P; Agarwal, Shubhi; Faulkner, M

    2014-01-01

    Refractory status epilepticus is a potentially life-threatening medical emergency. It requires early diagnosis and treatment. There is a lack of consensus upon its semantic definition of whether it is status epilepticus that continues despite treatment with benzodiazepine and one antiepileptic medication (AED), i.e., Lorazepam + phenytoin. Others regard refractory status epilepticus as failure of benzodiazepine and 2 antiepileptic medications, i.e., Lorazepam + phenytoin + phenobarb. Up to 30% patients in SE fail to respond to two antiepileptic drugs (AEDs) and 15% continue to have seizure activity despite use of three drugs. Mechanisms that have made the treatment even more challenging are GABA-R that is internalized during status epilepticus and upregulation of multidrug transporter proteins. All patients of refractory status epilepticus require continuous EEG monitoring. There are three main agents used in the treatment of RSE. These include pentobarbital or thiopental, midazolam and propofol. RSE was shown to result in mortality in 35% cases, 39.13% of patients were left with severe neurological deficits, while another 13% had mild neurological deficits. PMID:24791086

  6. Radiochemical studies of the enrichment and determination of trace amounts of metals in refractory matrices using 1-(2-pyridylazo)-2-naphthol

    International Nuclear Information System (INIS)

    Bernkopf, A.

    A new and simple method for extraction and determination of trace amounts of iron and cadmium in a molybdenum matrix is presented. The method is based on liquid-liquid extraction, followed by liquid-solid separation, using 1-(2-pyridylazo)-2-naphthol as a selective reagent for the metal ions. The extraction efficiency was studied in pure aqueous solutions of cadmium and iron using a tracer technique; the parameters for quantitative extraction were determined. End analysis of iron and cadmium was performed both by X-ray fluorescence and by atomic absorption spectroscopy. Extraction from the molybdenum matrix was carried out in alkaline medium owing to the tendency of molybdenum to form heteropoly acids in acid solutions. The following detection limits were obtained: 4 g Cd resp. 6 g Fe by X-ray fluorescence; 0.1 g Cd/ml resp. 0.2 g Fe/ml by atomic absorption spectroscopy. The work closes with a discussion of the advantages and problems of solid extraction methods. (G.G.)

  7. Clinical and microbiological features of refractory periodontitis subjects.

    Science.gov (United States)

    Colombo, A P; Haffajee, A D; Dewhirst, F E; Paster, B J; Smith, C M; Cugini, M A; Socransky, S S

    1998-02-01

    The purpose of this investigation was to compare the clinical parameters and the site prevalence and levels of 40 subgingival species in successfully treated and refractory periodontitis subjects. 94 subjects received scaling and root planing and if needed, periodontal surgery and systemically administered tetracycline. 28 refractory subjects showed mean full mouth attachment loss and/or > 3 sites showing attachment loss > 2.5 mm within 1 year post-therapy. 66 successfully treated subjects showed mean attachment level gain and no sites with attachment loss > 2.5 mm. Baseline subgingival plaque samples were taken from the mesial aspect of each tooth and the presence and levels of 40 subgingival taxa were determined using whole genomic DNA probes and checkerboard DNA-DNA hybridization. The mean levels and % of sites colonized by each species (prevalence) was computed for each subject and differences between groups sought using the Mann-Whitney test. Most of the 40 species tested, including Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, Treponema denticola and Bacteroides forsythus, were equally or less prevalent in the refractory group. Prevotella nigrescens was significantly more prevalent in successfully treated subjects, while refractory subjects harbored a larger proportion of Streptococcus species, particularly Streptococcus constellatus. The odds of a subject being refractory was 8.6 (p or = 3.5% of the total DNA probe count. Since few microbiological differences existed between treatment outcome groups using DNA probes to known species, the predominant cultivable microbiota of 33 subgingival samples from 14 refractory subjects was examined. 85% of the 1649 isolates were identified using probes to 69 recognized subgingival species. The remaining unidentified strains were classified by analyzing 16S rRNA gene sequences. Many sequenced isolates were of taxa not considered a common part of the oral microbiota such as Acinetobacter baumanni

  8. Refractory chronic cluster headache

    DEFF Research Database (Denmark)

    Mitsikostas, Dimos D; Edvinsson, Lars; Jensen, Rigmor H

    2014-01-01

    Chronic cluster headache (CCH) often resists to prophylactic pharmaceutical treatments resulting in patients' life damage. In this rare but pragmatic situation escalation to invasive management is needed but framing criteria are lacking. We aimed to reach a consensus for refractory CCH definition...... for clinical and research use. The preparation of the final consensus followed three stages. Internal between authors, a larger between all European Headache Federation members and finally an international one among all investigators that have published clinical studies on cluster headache the last five years...

  9. Slagging gasifier refractories. A new pathway to longer refractory life

    Energy Technology Data Exchange (ETDEWEB)

    Schnake, Mark [Harbinson-Walker Refractories Company, Mexico, MO (United States)

    2013-07-01

    Solid fuel slagging gasification to convert coal or petroleum coke feedstocks into syngas has rapidly evolved over the last 25 years. The gasifier is a high temperature, high pressure reaction chamber. Operating temperatures are between 1250 and 1575 C. Pressures will be between 20.4 and 68 atm. Syngas has been typically used for chemical feedstocks, fuel for power plants, or for steam and hydrogen generation in other industrial applications. Ash which comes from the solid fuel during gasification has many impurities. It melts during the gasifier reactor operation forming a liquid that penetrates the refractory lining. Given time, the refractory will wear away from thermal spalling, structural spalling, or overheating of the refractory. In some cases, all three wear mechanisms are seen in the same gasifier lining. Industry users have identified refractory life as one major limiting factor in worldwide use of this technology. Users have stated if the refractory liner can increase on-line availability of the gasifier operation, more industry acceptance of this technology is possible. Harbison-Walker Refractories Company will review destructive factors affecting lining life and discuss new refractory materials that have dramatically increased gasifier lining life and reliability. New refractory materials will be presented and supported by field trial results and post mortem analysis.

  10. IMPROVED CORROSION RESISTANCE OF ALUMINA REFRACTORIES

    Energy Technology Data Exchange (ETDEWEB)

    John P. Hurley; Patty L. Kleven

    2001-09-30

    The initial objective of this project was to do a literature search to define the problems of refractory selection in the metals and glass industries. The problems fall into three categories: Economic--What do the major problems cost the industries financially? Operational--How do the major problems affect production efficiency and impact the environment? and Scientific--What are the chemical and physical mechanisms that cause the problems to occur? This report presents a summary of these problems. It was used to determine the areas in which the EERC can provide the most assistance through bench-scale and laboratory testing. The final objective of this project was to design and build a bench-scale high-temperature controlled atmosphere dynamic corrosion application furnace (CADCAF). The furnace will be used to evaluate refractory test samples in the presence of flowing corrodents for extended periods, to temperatures of 1600 C under controlled atmospheres. Corrodents will include molten slag, steel, and glass. This test should prove useful for the glass and steel industries when faced with the decision of choosing the best refractory for flowing corrodent conditions.

  11. Nanostructured refractory thin films for solar applications

    Science.gov (United States)

    Ollier, E.; Dunoyer, N.; Dellea, O.; Szambolics, H.

    2014-08-01

    Selective solar absorbers are key elements of all solar thermal systems. Solar thermal panels and Concentrated Solar Power (CSP) systems aim respectively at producing heat and electricity. In both cases, a surface receives the solar radiation and is designed to have the highest optical absorption (lowest optical reflectivity) of the solar radiation in the visible wavelength range where the solar intensity is the highest. It also has a low emissivity in the infrared (IR) range in order to avoid radiative thermal losses. Current solutions in the state of the art usually consist in deposited interferential thin films or in cermets [1]. Structured surfaces have been proposed and have been simulated because they are supposed to be more efficient when the solar radiation is not normal to the receiving surface and because they could potentially be fabricated with refractory materials able to sustain high operating temperatures. This work presents a new method to fabricate micro/nanostructured surfaces on molybdenum (refractory metal with a melting temperature of 2623°C). This method now allows obtaining a refractory selective surface with an excellent optical selectivity and a very high absorption in the visible range. This high absorption performance was obtained by achieving a double structuration at micro and nano scales thanks to an innovative process flow.

  12. Refractory benign esophageal strictures

    Directory of Open Access Journals (Sweden)

    Gopal Goyal

    2016-01-01

    Full Text Available Refractory benign esophageal stricture (RBES is a frequently encountered problem worldwide. These strictures arise from various causes such as corrosive injury, radiation therapy, peptic origin, ablative therapy, and after surgery. Most strictures can be treated successfully with endoscopic dilatation using bougies or balloons, with only a few complications. Those patients who fail after serial dilatation with bougies or balloons will come to the category of refractory strictures. Dilatation combined with intralesional steroid injections can be considered for peptic strictures, whereas incisional therapy has been demonstrated to be effective for short anastomotic strictures. When these therapeutic options do not resolve the stenosis, stent placement should be considered. Self-bougienage can be proposed to a selected group of patients with a proximal stenosis. Most of the patients of RBES respond to above-mentioned treatment and occasional patient may require surgery as the final treatment option. This review aims to provide a comprehensive approach toward endoscopic management of RBESs based on current literature and personal experience.

  13. Approaches to refractory epilepsy

    Directory of Open Access Journals (Sweden)

    Jerome Engel

    2014-01-01

    Full Text Available Epilepsy is one of the most common serious neurological conditions, and 30 to 40% of people with epilepsy have seizures that are not controlled by medication. Patients are considered to have refractory epilepsy if disabling seizures continue despite appropriate trials of two antiseizure drugs, either alone or in combination. At this point, patients should be referred to multidisciplinary epilepsy centers that perform specialized diagnostic testing to first determine whether they are, in fact, pharmacoresistant, and then, if so, offer alternative treatments. Apparent pharmacoresistance can result from a variety of situations, including noncompliance, seizures that are not epileptic, misdiagnosis of the seizure type or epilepsy syndrome, inappropriate use of medication, and lifestyle issues. For patients who are pharmacoresistant, surgical treatment offers the best opportunity for complete freedom from seizures. Surgically remediable epilepsy syndromes have been identified, but patients with more complicated epilepsy can also benefit from surgical treatment and require more specialized evaluation, including intracranial EEG monitoring. For patients who are not surgical candidates, or who are unwilling to consider surgery, a variety of other alternative treatments can be considered, including peripheral or central neurostimulation, ketogenic diet, and complementary and alternative approaches. When such alternative treatments are not appropriate or effective, quality of life can still be greatly improved by the psychological and social support services offered by multidisciplinary epilepsy centers. A major obstacle remains the fact that only a small proportion of patients with refractory epilepsy are referred for expert evaluation and treatment.

  14. Refractories for exhaust gas scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Primary metal smelters are recovering a greater percentage of their stack emissions because of increased global environmental pressures. Copper and nickel producers processing sulfide ore are under particular scrutiny for sulfur dioxide emissions. The use of various acid plant designs and associated scrubbers to capture the gas is commonplace. Failure of acid plant or sulfur dioxide control devices can be very expensive, both in terms of repair costs and lost production. Close attention should be paid to ensure smooth, long term and proper operation of these vessels. With INCO flash furnace shops smelter gases are treated immediately upon leaving the furnace in a particulate scrubber where the gases are cooled and de-dusted in a water spray chamber. The amount of chlorine and fluorine in the waste gas can vary widely, ranging from non-existent to being a major source of concern for refractory wear. Developed specifically for use in hazardous waste incinerators burning fluorine-containing materials, spall-resistant, high-purity alimina bricks were installed in various gas cleaning units in copper smelting plants. Because of the materials's combination of abrasion resistance, thermal cycling resistance, and chemical durability under conditions of variable SO(3) and fluorine attack, the material has proven to be more than adequate for the challenges of gas cleaning equipment. 2 refs.

  15. Autoradiographic study of corrosion of refractories

    International Nuclear Information System (INIS)

    Lisenenkova, S.B.; Kucheryavyi, M.N.; Bursteva, T.A.

    1988-01-01

    A comparative study was made of the character of the interaction between a container-glass melt consisting of sodium calcium silicate and refractories in various furnace sections using an autoradiographic method. Static tests were conducted on specimens of the following refractories: chrome-aluminum-zircon, Bakor 41, corundum, a high alumina refractory, and a refractory based on tin dioxide. The specimens were activated by calcium 45. Autoradiography and photomicrography indicated that an intrinsic feature of all refractories was that calcium from the melt penetrated the refractories along the weak link; for fused-cast refractories, the glass phase; and for sintered refractories, through the binder and cracks

  16. Paternal Attachment, Parenting Beliefs and Children's Attachment

    Science.gov (United States)

    Howard, Kimberly S.

    2010-01-01

    Relationships between fathers' romantic attachment style, parenting beliefs and father-child attachment security and dependence were examined in a diverse sample of 72 fathers of young children. Paternal romantic attachment style was coded based on fathers' endorsement of a particular style represented in the Hazan and Shaver Three-Category…

  17. Refractory chronic migraine

    DEFF Research Database (Denmark)

    Martelletti, Paolo; Katsarava, Zaza; Lampl, Christian

    2014-01-01

    The debate on the clinical definition of refractory Chronic Migraine (rCM) is still far to be concluded. The importance to create a clinical framing of these rCM patients resides in the complete disability they show, in the high risk of serious adverse events from acute and preventative drugs...... and in the uncontrolled application of therapeutic techniques not yet validated.The European Headache Federation Expert Group on rCM presents hereby the updated definition criteria for this harmful subset of headache disorders. This attempt wants to be the first impulse towards the correct identification...... of these patients, the correct application of innovative therapeutic techniques and lastly aim to be acknowledged as clinical entity in the next definitive version of the International Classification of Headache Disorders 3 (ICHD-3 beta)....

  18. Refractory gastroesophageal reflux disease

    Science.gov (United States)

    Subramanian, Charumathi Raghu; Triadafilopoulos, George

    2015-01-01

    Gastroesophageal reflux disease (GERD) is a condition that develops when the reflux of stomach contents into the esophagus causes troublesome symptoms, esophageal injury, and/or complications. Use of proton pump inhibitors (PPI) remains the standard therapy for GERD and is effective in most patients. Those whose symptoms are refractory to PPIs should be evaluated further and other treatment options should be considered, according to individual patient characteristics. Response to PPIs could be total (no symptoms), partial (residual breakthrough symptoms), or absent (no change in symptoms). Patients experiencing complete response do not usually need further management. Patients with partial response can be treated surgically or by using emerging endoscopic therapies. Patients who exhibit no response to PPI need further evaluation to rule out other causes. PMID:25274499

  19. Characterization of refractory brick based on local raw material from Lampung Province - Indonesia

    Science.gov (United States)

    Amin, Muhammad; Suryana, Yayat I.; Isnugroho, Kusno; Aji, Bramantyo B.; Birawidha, David C.; Hendronursito, Yusup

    2018-04-01

    Refractories are non-metallic inorganic materials that are difficult to melt at high temperatures and used in high-temperature casting industries. Refractories are classified into their constituent mineral feed stocks, refractories having typical plot properties commonly called fire bricks. In the manufacture of refractory bricks that exist in the market during the use of mangrove materials derived from abroad that is from China. In this research the refractory brick materials used are quartz sand, feldspart, kaolin, bentonite, and ball clay. All materials come from local Lampung Province - Indonesia. The experiment, there are 7 kinds of experimental composition, made of plot shape with size 230 mm, 65 mm in thickness, 114 mm height mould using manual press machine with 10 tons power and burning at 1400°C for 5 hours. Refractory brick product is done by physical test in the form of porosity, specific gravity, compressive strength and XRF and SEM characteristics. The result of XRF characteristic of refractory brick composition of 1 to 5 compared to the refractory brick type SK 34 in the market and the result of composition 1 is a composition close to refractory brick composition type SK 34 namely SiO2 is 54.21 %, Al2O3 is 25.38 % and test Physical of Bulk density is 2.25 g/cm3, porosity is 18.98 % and compressive strength is 325 kg/cm2.

  20. Updates in Refractory Status Epilepticus

    Science.gov (United States)

    Mahulikar, Advait; Suchdev, Kushak; Shah, Aashit

    2018-01-01

    Refractory status epilepticus is defined as persistent seizures despite appropriate use of two intravenous medications, one of which is a benzodiazepine. It can be seen in up to 40% of cases of status epilepticus with an acute symptomatic etiology as the most likely cause. New-onset refractory status epilepticus (NORSE) is a recently coined term for refractory status epilepticus where no apparent cause is found after initial testing. A large proportion of NORSE cases are eventually found to have an autoimmune etiology needing immunomodulatory treatment. Management of refractory status epilepticus involves treatment of an underlying etiology in addition to intravenous anesthetics and antiepileptic drugs. Alternative treatment options including diet therapies, electroconvulsive therapy, and surgical resection in case of a focal lesion should be considered. Short-term and long-term outcomes tend to be poor with significant morbidity and mortality with only one-third of patients reaching baseline neurological status. PMID:29854452

  1. On the calculation of the energies of dissociation, cohesion, vacancy formation, electron attachment, and the ionization potential of small metallic clusters containing a monovacancy

    Science.gov (United States)

    Pogosov, V. V.; Reva, V. I.

    2017-09-01

    In terms of the model of stable jellium, self-consistent calculations of spatial distributions of electrons and potentials, as well as of energies of dissociation, cohesion, vacancy formation, electron attachment, and ionization potentials of solid clusters of Mg N , Li N (with N ≤ 254 ) and of clusters containing a vacancy ( N ≥ 12) have been performed. The contribution of a monovacancy to the energy of the cluster and size dependences of its characteristics and of asymptotics have been discussed. Calculations have been performed using a SKIT-3 cluster at Glushkov Institute of Cybernetics, National Academy of Sciences, Ukraine (Rpeak = 7.4 Tflops).

  2. Performance of refractory alloy-clad fuel pins

    International Nuclear Information System (INIS)

    Dutt, D.S.; Cox, C.M.; Millhollen, M.K.

    1984-12-01

    This paper discusses objectives and basic design of two fuel-cladding tests being conducted in support of SP-100 technology development. Two of the current space nuclear power concepts use conventional pin type designs, where a coolant removes the heat from the core and transports it to an out-of-core energy conversion system. An extensive irradiation testing program was conducted in the 1950's and 1960's to develop fuel pins for space nuclear reactors. The program emphasized refractory metal clad uranium nitride (UN), uranium carbide (UC), uranium oxide (UO 2 ), and metal matrix fuels (UCZr and BeO-UO 2 ). Based on this earlier work, studies presented here show that UN and UO 2 fuels in conjunction with several refractory metal cladding materials demonstrated high potential for meeting space reactor requirements and that UC could serve as an alternative but higher risk fuel

  3. A simple method to assess bacterial attachment to surfaces

    Digital Repository Service at National Institute of Oceanography (India)

    Sonak, S.; Bhosle, N.B.

    The crystal violet microplate adhension assay was modified to evaluate bacterial adhesion to metal and non-metal surfaces. Both viable cell count and the absorbance of the crystal violet stained cells attached to aluminium increased over the period...

  4. 30 CFR 57.19028 - End attachment replacement.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 57.19028 Section 57.19028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Hoisting Wire Ropes § 57.19028 End attachment replacement. Wire rope attachments shall be replaced when...

  5. 30 CFR 56.19028 - End attachment replacement.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 56.19028 Section 56.19028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Wire Ropes § 56.19028 End attachment replacement. Wire rope attachments shall be replaced when cracked...

  6. Bulk Vitrification Castable Refractory Block Protection Study

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Beck, Andrew E.; Brouns, Thomas M.; Caldwell, Dustin D.; Elliott, Michael L.; Matyas, Josef; Minister, Kevin BC; Schweiger, Michael J.; Strachan, Denis M.; Tinsley, Bronnie P.; Hollenberg, Glenn W.

    2005-05-01

    Bulk vitrification (BV) was selected for a pilot-scale test and demonstration facility for supplemental treatment to accelerate the cleanup of low-activity waste (LAW) at the Hanford U.S. DOE Site. During engineering-scale (ES) tests, a small fraction of radioactive Tc (and Re, its nonradioactive surrogate) were transferred out of the LAW glass feed and molten LAW glass, and deposited on the surface and within the pores of the castable refractory block (CRB). Laboratory experiments were undertaken to understand the mechanisms of the transport Tc/Re into the CRB during vitrification and to evaluate various means of CRB protection against the deposition of leachable Tc/Re. The tests used Re as a chemical surrogate for Tc. The tests with the baseline CRB showed that the molten LAW penetrates into CRB pores before it converts to glass, leaving deposits of sulfates and chlorides when the nitrate components decompose. Na2O from the LAW reacts with the CRB to create a durable glass phase that may contain Tc/Re. Limited data from a single CRB sample taken from an ES experiment indicate that, while a fraction of Tc/Re is present in the CRB in a readily leachable form, most of the Tc/Re deposited in the refractory is retained in the form of a durable glass phase. In addition, the molten salts from the LAW, mainly sulfates, chlorides, and nitrates, begin to evaporate from BV feeds at temperatures below 800 C and condense on solid surfaces at temperatures below 530 C. Three approaches aimed at reducing or preventing the deposition of soluble Tc/Re within the CRB were proposed: metal lining, sealing the CRB surface with a glaze, and lining the CRB with ceramic tiles. Metal liners were deemed unsuitable because evaluations showed that they can cause unacceptable distortions of the electric field in the BV system. Sodium silicate and a low-alkali borosilicate glaze were selected for testing. The glazes slowed down molten salt condensate penetration, but did little to reduce the

  7. Interface Analyses Between a Case-Hardened Ingot Casting Steel and Carbon-Containing and Carbon-Free Refractories

    Science.gov (United States)

    Fruhstorfer, Jens; Dudczig, Steffen; Rudolph, Martin; Schmidt, Gert; Brachhold, Nora; Schöttler, Leandro; Rafaja, David; Aneziris, Christos G.

    2018-06-01

    Corrosion tests of carbon-free and carbon-containing refractories were performed. The carbon-free crucibles corroded, whereas the carbon-containing crucibles were negligibly attacked. On them, inclusions were attached. This study investigates melt oxygen contents, interface properties, and steel compositions with their non-metallic inclusions in order to explore the inclusion formation and deposition mechanisms. The carbon-free crucibles were based on alumina, mullite, and zirconia- and titania-doped alumina (AZT). The carbon-containing (-C) ones were alumina-C and AZT-C. Furthermore, nanoscaled carbon and alumina additives (-n) were applied in an AZT-C-n material. In the crucibles, the case-hardened steel 17CrNiMo7-6 was remelted at 1580 °C. It was observed that the melt and steel oxygen contents were higher for the tests in the carbon-free crucibles. Into these crucibles, the deoxidizing alloying elements Mn and Si diffused. Reducing contents of deoxidizing elements resulted in higher steel oxygen levels and less inclusions, mainly of the inclusion group SiO2-core-MnS-shell (2.5 to 8 μ m). These developed from smaller SiO2 nuclei. The inclusion amount in the steel was highest after remelting in AZT-C-n for 30 minutes but decreased strongly with increasing remelting time (60 minutes) due to inclusions' deposition on the refractory surface. The Ti from the AZT and the nanoadditives supported inclusion growth and deposition. Other inclusion groups were alumina and calcium aluminate inclusions. Their contents were high after remelting in carbon- or AZT-containing crucibles but generally decreased during remelting. On the AZT-C-n crucible, a dense layer formed from vitreous compositions including Al, Ca, Mg, Si, and Ti. To summarize, for reducing forming inclusion amounts, mullite is recommended as refractory material. For capturing formed inclusions, AZT-C-n showed a high potential.

  8. Performance assessment of refractory samples in the Los Alamos Controlled Air Incinerator

    International Nuclear Information System (INIS)

    Hutchins, D.A.; Borduin, L.C.; Koenig, R.A.; Vavruska, J.S.; Warner, C.L.

    1986-01-01

    A refractory evaluation project was initiated in 1979 to study the performance of six selected refractory materials within the Los Alamos Controlled Air Incinerator (CAI). Determining refractory resistance to thermal shock, chemical attack, and plutonium uptake was of particular interest. The experimental refractories were subjected to a variety of waste materials, including transuranic (TRU) contaminated wastes, highly chlorinated compounds and alkaline metal salts of perchlorate, chlorate, nitrate and oxylate, over the six year period of this study. Results of this study to date indicate that the use of high alumina, and possibly specialty plastic refractories, is advisable for the lining of incinerators used for the thermal destruction of diverse chemical compounds. 12 refs., 4 tabs

  9. Dual-shank attachment design for omega seals

    International Nuclear Information System (INIS)

    Sattinger, S.S.

    1978-01-01

    An improved apparatus and process is disclosed for attaching welded omega seal segments to reactor heads, standpipes, mechanisms, and plugs which comprises a first shank in combination with a second shank to attach an omega seal at a metal-to-metal interface

  10. Attachment and prejudice.

    Science.gov (United States)

    Carnelley, Katherine B; Boag, Elle M

    2018-04-16

    There is a paucity of research that examines prejudice from an attachment theory perspective. Herein we make theoretical links between attachment patterns and levels of prejudice. Perceptions of outgroup threat, which activate the attachment system, are thought to lead to fear and prejudice for those high in attachment anxiety, and to distancing and prejudice for those high in attachment avoidance. We review the literature that examines the associations between attachment patterns and prejudice; evidence from attachment priming studies suggests a causal role of attachment security in reducing prejudice. We identify several mediators of these links: empathy, negative emotions, trust, social dominance orientation, romanticism, and contact quality. Future research should manipulate potential mediators and use psychophysiological assessments of threat. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Attachment and social networks.

    Science.gov (United States)

    Gillath, Omri; C Karantzas, Gery; Lee, Juwon

    2018-02-21

    The current review covers two lines of research linking attachment and social networks. One focuses on attachment networks (the people who fulfill one's attachment needs), examining composition and age-related differences pertaining to these networks. The other line integrates attachment with social network analysis to investigate how individual differences in adult attachment are associated with the management and characteristics (e.g., density, multiplexity, and centrality) of people's social networks. We show that most people's attachment networks are small and hierarchical, with one figure being the primary attachment figure (often a mother or romantic partner, depending on age). Furthermore, attachment style predicts network characteristics and management, such that insecurity is associated with less closeness, multiplexity, centrality, and poorer management (less maintenance, more dissolution). Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Belt attachment and system

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Abraham D.; Davidson, Erick M.

    2018-03-06

    Disclosed herein is a belt assembly including a flexible belt with an improved belt attachment. The belt attachment includes two crossbars spaced along the length of the belt. The crossbars retain bearings that allow predetermined movement in six degrees of freedom. The crossbars are connected by a rigid body that attaches to the bearings. Implements that are attached to the rigid body are simply supported but restrained in pitching rotation.

  13. Electron-attachment processes

    International Nuclear Information System (INIS)

    Christophorou, L.G.; McCorkle, D.L.; Christodoulides, A.A.

    1982-01-01

    Topics covered include: (1) modes of production of negative ions, (2) techniques for the study of electron attachment processes, (3) dissociative electron attachment to ground-state molecules, (4) dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), (5) molecular parent negative ions, and (6) negative ions formed by ion-pair processes and by collisions of molecules with ground state and Rydberg atoms

  14. Attachment over Time.

    Science.gov (United States)

    Lewis, Michael; Feiring, Candice; Rosenthal, Saul

    2000-01-01

    Examined continuity in attachment classification from infancy through adolescence and related it to autobiographical memories of childhood, divorce, and maladjustment in white middle-class children. Found no continuity in attachment classification from 1 to 18 years and no relation between infant attachment status and adolescent adjustment.…

  15. Attachment and Psychopathology

    Directory of Open Access Journals (Sweden)

    Mehmet Fatih Ustundag

    2011-06-01

    Full Text Available The type of attachment defined in the early stages of life and thought to be continuous, is a phenomenon that shapes the pattern of how a person makes contact with others. The clinical appearance of every type of attachment is different and each one has prospective and retrospective phenomenological reflections. In all stages of life and in close relationships, it can be observed if a person gets in close contact with someone else and if this relation bears supportive and protective qualities. According to attachment theorists, once it is defined as safe or unsafe during nursing period, it shows little change. Starting from Bowlby’s work, unsafe attachment type is considered as the determining factor of psychopathology in the later periods of life, while safe attachment is considered as in relation with healthy processes. The nature’s original model is safe attachment. Anxious/indecisive attachment, an unsafe attachment type, is associated with anxiety disorders and depressive disorder, while avoidant attachment is associated with behavior disorder and other extroverted pathologies. Disorganized/disoriented attachment is considered to be together with dissociative disorder. The aim of this paper is to review attachment theory and the relation between attachment and psychopathology.

  16. Special Attachments. Module 19.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on special attachments, one in a series dealing with industrial sewing machines, their attachments, and operation, covers four topics: gauges; cording attachment; zipper foot; and hemming, shirring, and binding. For each topic these components are provided: an introduction, directions, an objective, learning activities, student…

  17. Bulk Vitrification Performance Enhancement: Refractory Lining Protection Against Molten Salt Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Schweiger, Michael J.; Evans, Michael B.; Smith, Benjamin T.; Arrigoni, Benjamin M.; Kim, Dong-Sang; Rodriguez, Carmen P.; Yokuda, Satoru T.; Matyas, Josef; Buchmiller, William C.; Gallegos, Autumn B.; Fluegel, Alexander

    2007-08-06

    Bulk vitrification (BV) is a process that heats a feed material that consists of glass-forming solids and dried low-activity waste (LAW) in a disposable refractory-lined metal box using electrical power supplied through carbon electrodes. The feed is heated to the point that the LAW decomposes and combines with the solids to generate a vitreous waste form. This study supports the BV design and operations by exploring various methods aimed at reducing the quantities of soluble Tc in the castable refractory block portion of the refractory lining, which limits the effectiveness of the final waste form.

  18. Determination of Unit Pressure Force in Material Volume in the Course of Refractory Stamping Press Moulding

    Directory of Open Access Journals (Sweden)

    Orłowicz A.W.

    2016-06-01

    Full Text Available The paper presents results of assessment of the unit pressure force within the refractory material volume in the course press-moulding of stampings for refractory precast shapes. The force was evaluated with the use of physical simulation of deformation undergone by lead balls placed in the raw refractory mass subjected to pressing in a metal die. To determine the value of unit pressure force applied to the aggregate grains in the course of stamping press-moulding, physical model of deformation of a sphere induced by the uniaxial stress state was used.

  19. Machining refractory alloys: an overview

    International Nuclear Information System (INIS)

    Christopher, J.D.

    1984-01-01

    Nontraditional machining is a generic term for those material removal processes that differ drastically from the historic operations such as turning, milling, drilling, tapping, and grinding. The use of primary energy modes other than mechanical, such as thermal, electrical, and chemical, sets these operations apart and reinforces their nontraditional label. Several of these newer processes have been very successful in machining close tolerance parts from refractory materials. This paper provides a general overview of both traditional and nontraditional aspects of machining refractory materials. 11 figures, 7 tables

  20. Refractories for steel-works

    International Nuclear Information System (INIS)

    Villanova, R.A.; Galant, C.L.; Haas, C.; Rosenbaum, V.

    The routine procedures utilized for quality control of refractory materials used by PIRATINI's steel-works, are presented ' under an objetive and practical maner. The attention of the paper is concentrated upon the following' refractory types with higher consume: silicon-aluminous; aluminous; basic magnesia; basic chrom-magnesia. All steps of utilization are described, including specification, supplies programation, storage; sampling; physical tests, and also aplication procedures. Results from routine analysis during a six month period, by ' means of X-Ray Quantometry, using the fusion pearls procedure, are presented compared with Atomic Absorption [pt

  1. Development of a Refractory High Entropy Superalloy (Postprint)

    Science.gov (United States)

    2016-03-17

    hardened with HfC precipitates [2], Co-Re- or Co-Al-W-based alloys [3] or two-phase ( FCC + L12) refractory superalloys based on platinum group metals...Ni-based superalloys consisting of cuboids with the ordered L12 structure embedded in an FCC solid-solution matrix. Based on this microstructural...and 5). A comparison of the average atomic radii with the measured lattice parameters allows us to conclude that the disordered BCC phase forming

  2. Applications of radioisotopes for studying refractory wear-out in Bhilai Steel Plant

    International Nuclear Information System (INIS)

    Dubey, R.S.; Bose, U.P.; Shipstone, A.J.

    1979-01-01

    In Bhilai Steel Plant, investigations were carried out to study the refractory wear-out of (i) hearth bottom of blast furnaces, (ii) roof of open hearth furnaces, and (iii) hot metal mixer lining, by using radioisotope tracer techniques with a view to evaluate the life of the refractory lining at various locations and to help in planning its timely hot and cold repairs. The life of the refractory lining has the effective bearing on the overall production and hence on the economy of the plant. The two radiometric methods employed for studying the erosion of the refractory lining, by using isotope inserted bricks at various positions without damaging the lining are (i) based on recording the penetration of gamma rays emitting from the radioactive isotopes inserted at definite points of the brick lining and, (ii) by detecting the radioactivity of the pig iron or steel arising due to washing away of the respective radioactive isotopes previously inserted in the lining. In hot mixers also radioisotope sources were placed in the critical location of refractory lining and the washing out of radioisotope due to refractory brick wear out was detected by radiogauging at site. It has been found that radiotracer technique with periodic radiogauging is very useful method for tracing the radioisotope source if more than one refractory brick with isotope is placed, as in the case of open hearth furnaces. The results of radioanalysis revealed that radioactivity coming alongwith hot metal steel has been far below the permissible limit of concentration i.e. 20 micro-curie per ton of metal. Further, during dismantling of the residual refractory lining of open hearth furnaces or hot metal mixers, bricks containing radioisotopes have been successfully retrieved for safe disposal. (auth.)

  3. Electron attachment rate constant measurement by photoemission electron attachment ion mobility spectrometry (PE-EA-IMS)

    International Nuclear Information System (INIS)

    Su, Desheng; Niu, Wenqi; Liu, Sheng; Shen, Chengyin; Huang, Chaoqun; Wang, Hongmei; Jiang, Haihe; Chu, Yannan

    2012-01-01

    Photoemission electron attachment ion mobility spectrometry (PE-EA-IMS), with a source of photoelectrons induced by vacuum ultraviolet radiation on a metal surface, has been developed to study electron attachment reaction at atmospheric pressure using nitrogen as the buffer gas. Based on the negative ion mobility spectra, the rate constants for electron attachment to tetrachloromethane and chloroform were measured at ambient temperature as a function of the average electron energy in the range from 0.29 to 0.96 eV. The experimental results are in good agreement with the data reported in the literature. - Highlights: ► Photoemission electron attachment ion mobility spectrometry (PE-EA-IMS) was developed to study electron attachment reaction. ► The rate constants of electron attachment to CCl 4 and CHCl 3 were determined. ► The present experimental results are in good agreement with the previously reported data.

  4. REFRACTORY THROMBOCYTOPENIA AND NEUTROPENIA: A DIAGNOSTIC CHALLENGE

    OpenAIRE

    Emmanuel Gyan; François Dreyfus; Pierre Fenaux

    2015-01-01

    Background. The 2008 WHO classification identified refractory cytopenia with unilineage dysplasia (RCUD) as a composite entity encompassing refractory anemia, refractory thrombocytopenia (RT), and refractory neutropenia (RN), characterized by 10% or more dysplastic cells in the bone marrow respective lineage. The diagnosis of RT and RN is complicated by several factors.  Diagnosing RT first requires exclusion of familial thrombocytopenia, chronic auto-immune thrombocytopenia, concomitant medi...

  5. Refractory disease in autoimmune diseases

    NARCIS (Netherlands)

    Vasconcelos, Carlos; Kallenberg, Cees; Shoenfeld, Yehuda

    Refractory disease (RD) definition has different meanings but it is dynamic, according to knowledge and the availability of new drugs. It should be differentiated from severe disease and damage definitions and it must take into account duration of adequate therapy and compliance of the patient. It

  6. Welding of refractory alloys

    International Nuclear Information System (INIS)

    Lessmann, G.G.

    1984-01-01

    This review primarily summarizes welding evaluations supported by NASA-Lewis Research Center in the 1960s. A literature search run in preparation for this review indicates that more recent work is modest by comparison. Hence, this review restates these accomplishments briefly and addresses opportunities which have evolved in welding technology (such as lasers) in the intervening decade. Emphasis in this review is given to tantalum- and niobium-base alloys. Considerable work was also done to assure that a consistent comparison was made with tungsten. A wide variety of candidate alloys derived primarily from developments directed at aircraft propulsion applications were available. Early efforts by NASA were directed at screening studies to select promising structural alloys for the space power application. This objective required fine tuning of welding procedures, e.g., the demonstration of stringent standards for control of welding atmosphere to assure good corrosion resistance in liquid alkali metals. 16 figures, 6 tables

  7. Blade attachment assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  8. ATTACHMENT AND TRANSFER

    OpenAIRE

    Pasare, Daniela

    2011-01-01

    Bowlby's concept of attachment and Freud's concept of transference are two of the most influential theories of how we construct mental representations of human relationships. The attachment’s theory offers one more strategy for the therapeutic approach. Factors that lead to a secure attachment between mother and child may also be applied to the relationship between patient and psychotherapist. Psychotherapy may help a patient create himself new attachment and relationship patterns. Creating a...

  9. Mechanical properties of refractory concretes for boilers; Propriedades mecanicas de concretos refratarios para caldeiras

    Energy Technology Data Exchange (ETDEWEB)

    Angioletto, E.; Pelisser, F.; Peterson, M.; Angioletto, E.; Rocha, M.R.; Arnt, A.B.C. [Universidade do Estado de Santa Catarina (UDESC), Criciuma, SC (Brazil)], E-mail: ean@unesc.net; Coelho, R. [Tractebel Energia, Florianpolis, SC (Brazil)

    2010-07-01

    Refractory concretes are used in extremely physically demanding conditions. An important example is concretes used as sealing systems in boilers, where their dimensional stability at high temperatures is fundamental to durability and has a strong impact on maintenance costs and system idleness. In this work, refractory concretes with different compositions were characterized and then tested by dilatometry, for compressive strength and in assays involving adherence between tensile concrete/metal inserts, simulating the fixing system in boilers. Analysis of the results showed that refractory concretes do not present retraction due to air during drying, eliminating the possibility of cracking. While casting the plate/prototype with metal inserts, satisfactory concrete/metal adherence was verified and surface cracking occurred that did not influence the tensile bond strength between the insert and the concrete. (author)

  10. Interventional embolization for refractory hyperthyroidism

    International Nuclear Information System (INIS)

    Jiang Guomin; Zhang Yunping; Chen Yaxian; Zhao Jinwei; Yang Weihuai; Chen Jinluo

    2001-01-01

    Objective: To evaluate the clinical effects of the thyroid artery embolization for refractory hyperthyroidism. Methods: Super selective catheterization and interventional embolization of thyroid superior and inferior arteries were performed with PVA microspheres and Gelfoam particles. Changes of function and size of thyroid were investigated after embolization. Results: The procedures were succeeded in all 21 patients. Followed up by 3-12 months, serum level of thyroid hormones dropped significantly (median FT 3 from 17.1 pmol/L to 7.44 pmol/L, median FT 4 from 51.1 pmol/L to 23.3 pmol/L, P< 0.01). The size of thyroid glands decreased remarkably. Symptoms of hyperthyroidism were controlled in 4 patients and were effectively controlled through low dose antithyroid medication in 17 patients. No serious complications occurred. Conclusions: Thyroid artery embolization is a new safe and effective method for refractory hyperthyroidism

  11. Enhancement of the life of refractories through the operational experience of plasma torch melter

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Young Pyo [Technology Institute, Korea Radioactive waste Agency (KORAD), Daejeon (Korea, Republic of); Choi, Jaang Young [Chungnam National University, Daejeon (Korea, Republic of)

    2016-06-15

    The properties of wastes for melting need to be considered to minimize the maintenance of refractory and to discharge the molten slags smoothly from a plasma torch melter. When the nonflammable wastes from nuclear facilities such as concrete debris, glass, sand, etc., are melted, they become acid slags with low basicity since the chemical composition has much more acid oxides than basic oxides. A molten slag does not have good characteristics of discharge and is mainly responsible for the refractory erosion due to its low liquidity. In case of a stationary plasma torch melter with a slant tapping port on the wall, a fixed amount of molten slags remains inside of tapping hole as well as the melter inside after tapping out. Nonmetallic slags keep the temperature higher than melting point of metal because metallic slags located on the bottom of melter by specific gravity difference are simultaneously melted when dual mode plasma torch operates in transferred mode. In order to minimize the refractory erosion, the compatible refractories are selected considering the temperature inside the melter and the melting behavior of slags whether to contact or noncontact with molten slags. An acidic refractory shall not be installed in adjacent to a basic refractory for the resistibility against corrosion.

  12. Attachment Theory and Mindfulness

    Science.gov (United States)

    Snyder, Rose; Shapiro, Shauna; Treleaven, David

    2012-01-01

    We initiate a dialog between two central areas in the field of psychology today: attachment theory/research and mindfulness studies. The impact of the early mother-infant relationship on child development has been well established in the literature, with attachment theorists having focused on the correlation between a mother's capacity for…

  13. Attachment and psychosis

    NARCIS (Netherlands)

    Korver, N.

    2014-01-01

    The main goal of this thesis was to further our understanding of current psychosocial models by introducing attachment as a relevant developmental framework. Firstly, attachment theory provides a psychosocial model for a developmental pathway to psychosis. Secondly, after expression of psychotic

  14. Attachment Security and Pain

    DEFF Research Database (Denmark)

    Andersen, Tonny Elmose; Lahav, Yael; Defrin, Ruth

    2015-01-01

    The present study assesses for the first time, the possible disruption effect of posttraumatic stress symptoms (PTSS) with regard to the protective role of attachment on pain, among ex-POWs. While secure attachment seems to serve as a buffer, decreasing the perception of pain, this function may...

  15. Development of diagnosis and repair system for steelmaking refractories; Seikoyo taikabutsu no shindan hoshu gijutsu no kakuritsu

    Energy Technology Data Exchange (ETDEWEB)

    Aso, S.; Harada, S.; Tsutsui, Y. [Nippon Steel Corp., Tokyo (Japan)

    1996-06-01

    The latest measurement equipment and repair method were introduced into the work area of all refractories in the process of torpedo cars, hot metal preliminary treatment, hot metal pans, secondary refining, and cast pans so as to improve the cost of the newest advanced steelmaking refractories. As a result, the refractory cost could be reduced by 10%. This paper introduces the improvement in RH refractories and refractories for hot metal preliminary treatment. As for basic items, in addition to the visual observation, the thickness of refractories was quantified using equipment (laser profile meter, thermotracer, and NS sensor) for the furnace stop in the minimum remaining length. An ITV was also installed in the facilities where the visual check is difficult to carry out. Repair is mainly done by spraying. A thermal spraying repair method with high durability was used for the repair. A method that relieves a thermal shock was used for preheating. Moreover, measures that make the temperature gradient in the thickness direction uniform by using newly developed microwave drying equipment were taken for drying of unburned refractories. 4 refs., 13 figs., 2 tabs.

  16. The Attachment Imperative

    DEFF Research Database (Denmark)

    Navne, Laura Emdal; Svendsen, Mette Nordahl; Gammeltoft, Tine

    2017-01-01

    on social relations and point to the productive aspects of practices of distance and detachment. We show that while the NICU upholds an imperative of attachment independently of the infant's chances of survival, for parents, attachment is contingent on certain hesitations in relation to their infant. We...... argue that there are nuances in practices of relationmaking in need of more attention (i.e., the nexus of attachment and detachment). Refraining from touching, holding, and feeding their infants during critical periods, the parents enact detachment as integral to their practices of attachment....... Such “cuts” in parent–infant relations become steps on the way to securing the infant's survival and making kin(ship). We conclude that although infants may be articulated as “maybe‐lives” by staff, in the NICU as well as in Danish society, the ideal of attachment appears to leave little room for “maybe‐parents.”...

  17. Emergency Surgery for Refractory Status Epilepticus.

    Science.gov (United States)

    Botre, Abhijeet; Udani, Vrajesh; Desai, Neelu; Jagadish, Spoorthy; Sankhe, Milind

    2017-08-15

    Management of refractory status epilepticus in children is extremely challenging. Two children with medically refractory status epilepticus, both of whom had lesional pathology on MRI and concordant data on EEG and PET scan. Emergency hemispherotomy performed in both patients. A complete, sustained seizure freedom obtained postoperatively. Emergency surgery is a treatment option in selected cases of drug refractory status epilepticus with lesional pathology and concordant data.

  18. Some quantitative data on bacterial attachment to pyrite

    NARCIS (Netherlands)

    Florian, B.; Noël, N.; Thyssen, C.; Felschau, I.; Sand, W.

    2011-01-01

    Bacterial attachment and biofilm formation are important for microbial bioleaching of metal sulfides, however, many details of the role played by bacteria are still unknown. Attachment as the first step in biofilm formation is critical. Our investigations are focused on these processes to control

  19. Merits of using andalusite-based refractories compared to bauxite-based refractories

    OpenAIRE

    Nyoka, M.; Brazier, D.; Courtney, T.; Parry, R.A.

    2013-01-01

    Historically bauxite-based refractories have been used in applications where andalusite-based refractories could work. Bauxite-based refractories were chosen over andalusite-based refractories mainly because of the availability of low-cost Chinese bauxite and also because many furnaces were designed by international companies that cannot easily access high-quality products. Currently, the availability of low-cost bauxite is under threat as a result of high export duties and tariffs as well as...

  20. Development of refractory concrete for extreme conditions

    International Nuclear Information System (INIS)

    Pundiene, I; Antonovich, V; Stonys, R; Demidova-Buiziniene, I

    2011-01-01

    Comparative analysis is provided for the properties of medium-cement refractory concrete with microsilica based on mullite filler in relation to different type of deflocculant. The effect of different deflocculants on refractory concrete structure formation, hydration, rheology, strength and heat resistance is discussed. Corrosion resistance test, determined that samples with hybrid deflocculant showed better resistance for slag penetration than samples with only the sodium tripolyphosphate or polycarboxylate ether deflocculant. Moreover, a composition of hybrid deflocculant let to control the rate of the hydration process and to get features of refractory refractory concrete.

  1. Refractory, Abrasive and Other Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes refractory, abrasive, and other industrial minerals operations in the United States. The data represent commodities covered by the Minerals...

  2. Refractory organic substances in the environment

    National Research Council Canada - National Science Library

    Frimmel, F. H

    2002-01-01

    ... and its Quality Control in Fractions of Refractory Organic Substances and the Corresponding Original Water Samples 39 Introduction 39 Description of Analytical Methods 41 Sample Treatment 41 Fl...

  3. Brazing of molybdenum- and tungsten based refractory materials with copper and graphite

    International Nuclear Information System (INIS)

    Boutes, J.; Falbriard, P.; Rochette, P.; Nicolas, G.

    1989-01-01

    Molybdenum and Tungsten base refractory metals and alloys have been brazed 1. to copper between 800 0 C and 900 0 C with silver base metal; 2. to graphite, with CVD coatings between 800 0 C and 900 0 C with silver base metal and between 1100 0 C and 1200 0 C with copper base metal; 3. to graphite between 800 0 C and 1100 0 C with silver or nickel base metal. The brazed joints have been characterized by micrographic observations before and after bending tests from room temperature to 800 0 C. 2 tabs., 9 figs. (Author)

  4. Assessing Attachment in Psychotherapy

    DEFF Research Database (Denmark)

    Talia, Alessandro; Miller-Bottome, Madeleine; Daniel, Sarah I.F.

    2017-01-01

    The authors present and validate the Patient Attachment Coding System (PACS), a transcript-based instrument that assesses clients' in-session attachment based on any session of psychotherapy, in multiple treatment modalities. One-hundred and sixty clients in different types of psychotherapy...... (cognitive–behavioural, cognitive–behavioural-enhanced, psychodynamic, relational, supportive) and from three different countries were administered the Adult Attachment Interview (AAI) prior to treatment, and one session for each client was rated with the PACS by independent coders. Results indicate strong...... inter-rater reliability, and high convergent validity of the PACS scales and classifications with the AAI. These results present the PACS as a practical alternative to the AAI in psychotherapy research and suggest that clinicians using the PACS can assess clients' attachment status on an ongoing basis...

  5. New sol–gel refractory coatings on chemically-bonded sand cores for foundry applications to improve casting surface quality

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Poulsen, T.; Stage, R.K.

    2011-01-01

    Foundry refractory coatings protect bonded sand cores and moulds from producing defective castings during the casting process by providing a barrier between the core and the liquid metal. In this study, new sol–gel refractory coating on phenolic urethane cold box (PUCB) core was examined. The coa......Foundry refractory coatings protect bonded sand cores and moulds from producing defective castings during the casting process by providing a barrier between the core and the liquid metal. In this study, new sol–gel refractory coating on phenolic urethane cold box (PUCB) core was examined......–gel coated cores have better surface quality than those from uncoated cores and comparable surface quality with the commercial coatings. Therefore, the new sol–gel coating has a potential application in the foundry industry for improving the surface finish of castings thereby reducing the cost of fettling...

  6. Genetics Home Reference: iron-refractory iron deficiency anemia

    Science.gov (United States)

    ... refractory iron deficiency anemia Iron-refractory iron deficiency anemia Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Iron-refractory iron deficiency anemia is one of many types of anemia , which ...

  7. Corrosion assessment of refractory materials for high temperature waste vitrification

    International Nuclear Information System (INIS)

    Marra, J.C.; Congdon, J.W.; Kielpinski, A.L.

    1995-01-01

    A variety of vitrification technologies are being evaluated to immobilize radioactive and hazardous wastes following years of nuclear materials production throughout the Department of Energy (DOE) complex. The compositions and physical forms of these wastes are diverse ranging from inorganic sludges to organic liquids to heterogeneous debris. Melt and off-gas products can be very corrosive at the high temperatures required to melt many of these waste streams. Ensuring material durability is required to develop viable treatment processes. Corrosion testing of materials in some of the anticipated severe environments is an important aspect of the materials identification and selection process. Corrosion coupon tests on typical materials used in Joule heated melters were completed using glass compositions with high salt contents. The presence of chloride in the melts caused the most severe attack. In the metal alloys, oxidation was the predominant corrosion mechanism, while in the tested refractory material enhanced dissolution of the refractory into the glass was observed. Corrosion testing of numerous different refractory materials was performed in a plasma vitrification system using a surrogate heterogeneous debris waste. Extensive corrosion was observed in all tested materials

  8. Improvements in or relating to refractory oxide protective coatings for fuel can

    International Nuclear Information System (INIS)

    Cairns, J.A.; Bennett, M.J.; Linacre, J.K.

    1981-01-01

    An improved coating for Advanced Gas Cooled Nuclear Reactor austenitic stainless steel fuel cans is described which, tests have shown, inhibits the deposition of carbon on the cans in carbon-containing ionising radiation environments. The coating comprises a refractory oxide which has been prepared by a vapour phase condensation method, in combination with a noble metal. (U.K.)

  9. Recovering uranium and/or aluminium from refractory silico-aluminous material

    International Nuclear Information System (INIS)

    Livesey-Goldblatt, E.; Nagy, I.F.; Tunley, T.H.

    1983-01-01

    A process for recovering uranium and/or aluminium from a refractory silico-aluminous material comprises leaching the material in one or more stages, obtaining a pregnant solution which contains little or no acid and recovering the desired metal from the solution

  10. Progress in the design of mechanically attached, conductively cooled low-Z armour tiles for the NET integrated first wall

    International Nuclear Information System (INIS)

    Shaw, R.; Vieider, G.

    1991-01-01

    For the NET device complete or extensive coverage of the first wall with a low-Z armour is envisaged. This armour may comprise a general protection, ∝90% total first-wall surface, of low-temperature conductively cooled tiles, complemented by a local protection of radiatively cooled tiles in regions where near peak fluxes are incident. A low-temperature (∝1000deg C) carbon-based armour, cooled via conduction to the reference NET integrated first wall, has been developed using currently available materials. The armour comprises a small square tile fabricated in high-conductivity 3-D or random-fibre carbon fibre reinforced carbon composite attached to the steel first wall via a stainless-steel/refractory metal stud assembly. Attachment forces are maintained within acceptable limits, particularly during baking, through material selection and component geometry. To ensure effective heat transfer throughout the duty cycle an intermediate conductive layer of a highly compliant material is foreseen. The scope of the paper covers the design of the armour assembly for proof of principle testing with the NET first-wall test section, TS1, and reports the results of supporting thermomechanical analyses. (orig.)

  11. Effects of Temperature, Oxygen Partial Pressure, and Materials Selection on Slag Infiltration into Porous Refractories for Entrained-Flow Gasifiers

    Science.gov (United States)

    Kaneko, Tetsuya Kenneth

    The penetration rate of molten mineral contents (slag) from spent carbonaceous feedstock into porous ceramic-oxide refractory linings is a critical parameter in determining the lifecycle of integrated gasification combined cycle energy production plants. Refractory linings that withstand longer operation without interruption are desirable because they can mitigate consumable and maintenance costs. Although refractory degradation has been extensively studied for many other high-temperature industrial processes, this work focuses on the mechanisms that are unique to entrained-flow gasification systems. The use of unique feedstock mixtures, temperatures from 1450 °C to 1600 °C, and oxygen partial pressures from 10-7 atm to 10-9 atm pose engineering challenges in designing an optimal refractory material. Experimentation, characterization, and modeling show that gasifier slag infiltration into porous refractory is determined by interactions between the slag and the refractory that either form a physical barrier that impedes fluid flow or induce an increased fluid viscosity that decelerates the velocity of the fluid body. The viscosity of the slag is modified by the thermal profile of the refractory along the penetration direction as well as reactions between the slag and refractory that alter the chemistry, and thereby the thermo-physical properties of the fluid. Infiltration experiments reveal that the temperature gradient inherently present along the refractory lining limits penetration. A refractory in near-isothermal conditions demonstrates deeper slag penetration as compared to one that experiences a steeper thermal profile. The decrease in the local temperatures of the slag as it travels deeper into the refractory increases the viscosity of the fluid, which in turn slows the infiltration velocity of fluid body into the pores of the refractory microstructure. With feedstock mixtures that exhibit high iron-oxide concentrations, a transition-metal-oxide, the oxygen

  12. The thermodynamic approach of the pilot-scale purification of refractory metals; Application de la thermodynamique a la mise au point des methodes de purification industrielle des metaux et semi-metaux refractaires

    Energy Technology Data Exchange (ETDEWEB)

    Accary, A [Commissariat a l' Energie Atomique, Dir. des Piles Atomiques, Saclay (France). Centre d' Etudes Nucleaires

    1967-06-15

    The author shows how the thermodynamic can be applied to the prediction of the evolution of impurities from a metal or an alloy being melted and cast at the pilot-scale using electron bombardment and continuous casting in a water cooled copper. He studies this possibility on two examples: - the melting vanadium, - the melting of the uranium monocarbide. He shows using only the constants available in the literature and a few special runs in the pilot-equipment itself it is possible to determine: - the possibility of elimination of anyone impurity by keeping the material in the melting state under vacuum as well as the limit of purification which is achievable under given technological conditions, - the proportion of an impure metal which should be vaporized in order to bring the level of a given impurity down to a predetermined level and the necessary duration of heating. (author) [French] L'auteur montre comment la thermodynamique peut etre appliquee a la prevision de l'evolution d'un metal ou d'un alliage fondu a l'echelle pilote par bombardement d'electrons et coule en continu dans un creuset de cuivre refroidi. Il etudie cette possibilite sur deux cas particuliers: - la fusion de vanadium, - la fusion du monocarbure d'uranium. Il montre que, grace aux constantes disponibles dans la litterature et a des essais simples faits a l'aide de l'appareillage pilote lui-meme, on peut determiner: - la possibilite d'eliminer une impurete par maintien a l'etat fondu ainsi que la limite de purification dans des conditions technologiques donnees, - la proportion d'un metal brut qu'il faut evaporer pour amener sa teneur en une impurete a un niveau donne ainsi que la duree de chauffage necessaire, - la nature des additions propres a favoriser le depart d'une impurete et l'efficacite comparee des additions possibles. (auteur)

  13. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Laing

    2005-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  14. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Jun Wei

    2005-03-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  15. Superego: an attachment perspective.

    Science.gov (United States)

    Holmes, Jeremy

    2011-10-01

    With the help of attachment theory and research, the paper attempts to broaden and build on classical and current views on the superego. Attachment theory's epigenetic approach and the concept of the subliminal superego are described. The superego, it is argued, is as much concerned with safety as sex. The superego is 'heir', not just to the Oedipus complex or Klein's pre-oedipal constellation, but also to the attachment relationship. Under favourable developmental conditions a 'mature superego' emerges, facilitating, in the presence of an internal secure base, maturational boundary crossings towards adult sexuality. In the light of the above, the paper reviews Lear's updating of Strachey's model of psychic change and explores the concept of transgression in relation to the 'professional superego', its development and maturation. Theoretical arguments are illustrated with clinical examples. Copyright © 2011 Institute of Psychoanalysis.

  16. Fuel rod attachment system

    International Nuclear Information System (INIS)

    Christiansen, D.W.

    1982-01-01

    A reusable system for removably attaching a nuclear reactor fuel rod to a support member. A locking cap is secured to the fuel rod and a locking strip is fastened to the support member or vice versa. The locking cap has two opposing fingers and shaped to form a socket having a body portion. The locking strip has an extension shaped to rigidly attach to the socket's body portion. The locking cap's fingers are resiliently deflectable. For attachment, the locking cap is longitudinally pushed onto the locking strip causing the extension to temporarily deflect open the fingers to engage the socket's body portion. For removal, the process is reversed. In an alternative embodiment, the cap is rigid and the strip is transversely resiliently compressible. (author)

  17. Love attitudes and attachment

    Directory of Open Access Journals (Sweden)

    María Elena Brenlla

    2016-02-01

    Full Text Available Love styles described by Lee are Eros (passionate love, Ludus (game-pla- ying love, Storge (friendship love, Mania (possessive, dependent love, Pragma (logical, “shopping list” love and Agape (all-giving, selfless love. Based on those types, Hendrick and Hendrick developed a 42-ítem rating questionnaire with 7 items measuring each love style (Love Attitudes Scale. Beside, inform about frequency in love relationships and attachment style. The purpose of this study was analyze the reliability and factor structure of the Love Attitudes Scale and to investigate the association between love attitudes and the attachment style. The results (N=280 participants indicate adequate internal consistency (alfa = 0,73. The items were intercorrelated and factored. The best solution extracted six factors using varimax rotation and all six factors accounted 41% of the total variance. Secure attachment was related positively to eros. 

  18. Compatibility of refractory alloys with space reactor system coolants and working fluids

    International Nuclear Information System (INIS)

    DeVan, J.H.; DiStefano, J.R.; Hoffman, E.E.

    1984-01-01

    The bulk of this report deals with compatibility studies in liquid lithium and boiling potassium. Substantial information is also presented concerning the reactivity of niobium and tantalum alloys with residual gases in high and ultrahigh vacuum atmospheres. The remaining information, which is much less extensive, covers the compatibility behavior of molybdenum and tungsten alloys in alkali metals and a qualitative assessment of the use of refractory metals for containing helium in a closed Brayton cycle. 22 references, 29 figures, 14 tables

  19. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr.; Alireza Rezaie

    2003-12-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  20. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Alireza Rezaie

    2003-12-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  1. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Alireza Rezaie; Xiaoting Liang; Musa Karakus; Jun Wei

    2005-12-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected or developed that reacted with the gasifier environment to form protective surfaces in

  2. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-10-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected/developed that either react with the gasifier environment to form protective surfaces in

  3. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick; Musa Karakus; Alireza Rezaie

    2004-03-30

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  4. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  5. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  6. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-01-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  7. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  8. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  9. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr.; Alireza Rezaie

    2004-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  10. Impact of Maternal Attachment Style on Mother to Infant Attachment

    Directory of Open Access Journals (Sweden)

    Moghaddam Hoseini V

    2011-08-01

    Full Text Available Background and Objectives: Maternal attachment has the potential to affect both child development and parenting. As such, mother-infant attachment has been considered an important topic in recent years. The aim of this study was to determine the relationship between maternal adult attachment style, the maternal obstetric and demographic characteristics and mother-infant attachment.Methods: In this descriptive-correlational study, 102 women who had referred to health centers in Mashhad in 2008 and who had inclusion criteriawere selected using stratified cluster sampling. After interview about obstetric and demographic characteristics, they were asked to complete the "Revised Adult Attachment Scale" and "Mother to Infant Attachment Inventory" for assessment of maternal attachment style and mother-infant attachment 4-5 weeks after delivery. Data were analyzed by Pearson Correlation, Kruskal-wallis and Mann-whitney statistical tests.Results: In this study, themean of mother-infant attachment was found to be 97.486.12 and the mean of secure adult attachment was higher than that of other styles (16.893.97. Although, there were negative significant relationship between maternal avoidant style and mother-infant attachment (p=0.037,r=-0/20, there were no relationship between maternal age and education, parity, type of delivery and mother-infant attachment.Conclusion: The results of this research show that maternal attachment style is one of the factors of mother -infant attachment.

  11. God attachment, mother attachment, and father attachment in early and middle adolescence.

    Science.gov (United States)

    Sim, Tick Ngee; Yow, Amanda Shixian

    2011-06-01

    The present study examined the interplay of attachment to God, attachment to mother, and attachment to father with respect to adjustment (hope, self-esteem, depression) for 130 early and 106 middle adolescents in Singapore. Results showed that the parental attachments were generally linked (in expected directions) to adjustment. God attachment, however, had unique results. At the bivariate level, God attachment was only linked to early adolescents' self-esteem. When considered together with parental attachments (including interactions), God attachment did not emerge as the key moderator in attachment interactions and yielded some unexpected results (e.g., being positively linked to depression). These results are discussed viz-a-viz the secure base and safe haven functions that God and parental attachments may play during adolescence.

  12. Refractories for Industrial Processing. Opportunities for Improved Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hayden, H. Wayne [Metals Manufacture Process and Controls Technology, Inc., Oak Ridge, TN (United States); Angelini, Peter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moore, Robert E. [R.E. Moore Associates, Maricopa, AZ (United States); Headrick, William L. [R.E. Moore Associates, Maricopa, AZ (United States)

    2005-01-01

    Refractories are a class of materials of critical importance to manufacturing industries with high-temperature unit processes. This study describes industrial refractory applications and identifies refractory performance barriers to energy efficiency for processing. The report provides recommendations for R&D pathways leading to improved refractories for energy-efficient manufacturing and processing.

  13. Surface modification-a novel way of attaching cocatalysts on CdS semiconductors for photocatalytic hydrogen evolution

    KAUST Repository

    Yu, Weili

    2014-08-22

    Noble metals as cocatalysts for hydrogen evolution are widely investigated for semiconductor photocatalytic water splitting. In this paper, we present a novel way to attach not only noble metals, but also transitional metals onto CdS nanocrystals as cocatalysts for hydrogen evolution. The hydrogen evolution performances for each metal were compared and result shows that Pd attached CdS gives the highest hydrogen evolution rate of 250 μmol/h. The amounts of metal ions attached on the surface were measured by inductively coupled plasma optical emission spectrometry (ICP-OES). This work confirms that surface modification is a promising way of attaching cocatalysts onto semiconductor photocatalysts.

  14. Surface modification-a novel way of attaching cocatalysts on CdS semiconductors for photocatalytic hydrogen evolution

    KAUST Repository

    Yu, Weili; Isimjan, Tayirjan; Lin, Bin; Takanabe, Kazuhiro

    2014-01-01

    Noble metals as cocatalysts for hydrogen evolution are widely investigated for semiconductor photocatalytic water splitting. In this paper, we present a novel way to attach not only noble metals, but also transitional metals onto CdS nanocrystals as cocatalysts for hydrogen evolution. The hydrogen evolution performances for each metal were compared and result shows that Pd attached CdS gives the highest hydrogen evolution rate of 250 μmol/h. The amounts of metal ions attached on the surface were measured by inductively coupled plasma optical emission spectrometry (ICP-OES). This work confirms that surface modification is a promising way of attaching cocatalysts onto semiconductor photocatalysts.

  15. Separation of magnesium from magnesium chloride and zirconium and/or hafnium subchlorides in the production of zirconium and/or hafnium sponge metal

    International Nuclear Information System (INIS)

    Abodishish, H.A.M.; Adams, R.J.; Kearl, S.R.

    1992-01-01

    This patent describes the producing of a refractory metal wherein a sponge refractory metal is produced as an intermediate product by the use of magnesium with the incidental production of magnesium chloride, and wherein residual magnesium is separated from the magnesium chloride and from refractory metal to a vacuum distillation step which fractionally distills the magnesium, the magnesium chloride, and the metal sub-chlorides; the steps of: recovering fractionally distilled vapors of magnesium chloride and metal sub-chlorides from a sponge refractory metal; separately condensing the vapors as separately recovered; and recycling the separately recovered magnesium at a purity of at least about 96%

  16. Zirconium determination in refractories (gravimetric method)

    International Nuclear Information System (INIS)

    Capiotto, N.; Narahashi, Y.; Perish, C.G.; Souza, J.R.

    1991-01-01

    The zirconium determination in refractories is described, consisting in two separation methods for eliminating the interferences. The formatted product is calcined at 1100 0 C and determined gravimetrically as Zr P z 07. (author)

  17. Testing Consent Order on Refractory Ceramic Fibers

    Science.gov (United States)

    This notice announces that EPA has signed signed an enforceable testing consent order under the Toxic Substances Control Act (TSCA), 15 U.S.C. section 2601 at seq., with three of the primary producers of refractory ceramic fibers (RCF).

  18. Zirconium determination in refractories (gravimetric method)

    International Nuclear Information System (INIS)

    Capiotto, N.; Narahashi, Y.; Perish, P.G.; Souza, J.R. de

    1991-01-01

    A gravimetric method for zirconium determination in refractories is described. X-ray fluorescence analysis is also employed in this experiment and considerations about interfering elements are presented. (M.V.M.)

  19. Prognostic Factors for Refractory Status Epilepticus

    Directory of Open Access Journals (Sweden)

    J. Gordon Millichap

    2013-03-01

    Full Text Available Researchers at the Mayo Clinic, Rochester, MN studied the outcome and identified prognostic factors for refractory status epilepticus (RSE in 54 adult patients, median age 52 years [range 18-93].

  20. Control of the refractory lining wear in blast furnaces, using a radiotracer technique

    International Nuclear Information System (INIS)

    Carvalho, G.; Vieira, J.M.; Daltro, T.F.L.; Banados Perez, H.E.

    1984-01-01

    Small metal 60 Co sources, double encapsulated with quartz and alumina, were inserted (at different depths and levels) into the refractory bricks of the blast furnace walls, and the initial radioactivity emerging at each location recorded as a reference data for future measurements. The displacement of the charge inside the blast furnace originates a progressive wear of the refractory lining and after certain time, the inner sources will begin to be scaped off from the wall and then dissolved in the molten iron. By periodically monitoring the radiation level at the points where the sources were placed, it is possible to know if some of them was removed by the wearing process. This, in turn, will indicate the thickness of refractory material lost in each location making of the blast furnace, as a function of time. The practical application of this method in the Brazilian steel industry is reported. (Author) [pt

  1. Forming Refractory Insulation On Copper Wire

    Science.gov (United States)

    Setlock, J.; Roberts, G.

    1995-01-01

    Alternative insulating process forms flexible coat of uncured refractory insulating material on copper wire. Coated wire formed into coil or other complex shape. Wire-coating apparatus forms "green" coat on copper wire. After wire coiled, heating converts "green" coat to refractory electrical insulator. When cured to final brittle form, insulating material withstands temperatures above melting temperature of wire. Process used to make coils for motors, solenoids, and other electrical devices to be operated at high temperatures.

  2. Refractory hypertension: definition, prevalence, and patient characteristics.

    Science.gov (United States)

    Acelajado, Maria Czarina; Pisoni, Roberto; Dudenbostel, Tanja; Dell'Italia, Louis J; Cartmill, Falynn; Zhang, Bin; Cofield, Stacey S; Oparil, Suzanne; Calhoun, David A

    2012-01-01

    Among patients with resistant hypertension (RHTN), there are those whose blood pressure (BP) remains uncontrolled in spite of maximal medical therapy. This retrospective analysis aims to characterize these patients with refractory hypertension. Refractory hypertension was defined as BP that remained uncontrolled after ≥3 visits to a hypertension clinic within a minimum 6-month follow-up period. Of the 304 patients referred for RHTN, 29 (9.5%) remained refractory to treatment. Patients with refractory hypertension and those with controlled RHTN had similar aldosterone levels and plasma renin activity (PRA). Patients with refractory hypertension had higher baseline BP (175±23/97±15 mm Hg vs 158±25/89±15 mm Hg; P=.001/.005) and heart rate, and higher rates of prior stroke and congestive heart failure. During follow-up, the BP of patients with refractory hypertension remained uncontrolled (168.4±14.8/93.8±17.7 mm Hg) in spite of use of an average of 6 antihypertensive medications, while those of patients with controlled RHTN decreased to 129.3±11.2/77.6±10.8 mm Hg. Spironolactone reduced the BP by 12.9±17.8/6.6±13.7 mm Hg in patients with refractory hypertension and by 24.1±16.7/9.2±12.0 mm Hg in patients with controlled RHTN. In patients with RHTN, approximately 10% remain refractory to treatment. Similar aldosterone and PRA levels and a diminished response to spironolactone suggest that aldosterone excess does not explain the treatment failure. © 2011 Wiley Periodicals, Inc.

  3. Workspace appropriation and attachment

    Directory of Open Access Journals (Sweden)

    M. PAVALACHE-ILIE

    2016-11-01

    Full Text Available This literature synthesis presents a short history of the evolution of the concepts of space appropriation and place attachment, highlighting the difficulty of their operationalisation from a cultural point of view. The next subject brought into discussion is the relation between the affective dimension of the connection between a person and the work place and the behaviours which are prone to insure the proper functioning of organizations, such as the organizational civism and the organizational commitment.

  4. Electron attachment analyzer

    International Nuclear Information System (INIS)

    Popp, P.; Grosse, H.J.; Leonhardt, J.; Mothes, S.; Oppermann, G.

    1984-01-01

    The invention concerns an electron attachment analyzer for detecting traces of electroaffine substances in electronegative gases, especially in air. The analyzer can be used for monitoring working places, e. g., in operating theatres. The analyzer consists of two electrodes inserted in a base frame of insulating material (quartz or ceramics) and a high-temperature resistant radiation source ( 85 Kr, 3 H, or 63 Ni)

  5. Love attitudes and attachment

    OpenAIRE

    María Elena Brenlla; Analía Brizzio; Alejandra Carreras

    2016-01-01

    Love styles described by Lee are Eros (passionate love), Ludus (game-pla- ying love), Storge (friendship love), Mania (possessive, dependent love), Pragma (logical, “shopping list” love) and Agape (all-giving, selfless love). Based on those types, Hendrick and Hendrick developed a 42-ítem rating questionnaire with 7 items measuring each love style (Love Attitudes Scale). Beside, inform about frequency in love relationships and attachment style. The purpose of this study was analyze the relia...

  6. REFRACTORY THROMBOCYTOPENIA AND NEUTROPENIA: A DIAGNOSTIC CHALLENGE

    Directory of Open Access Journals (Sweden)

    Emmanuel Gyan

    2015-02-01

    Full Text Available Background. The 2008 WHO classification identified refractory cytopenia with unilineage dysplasia (RCUD as a composite entity encompassing refractory anemia, refractory thrombocytopenia (RT, and refractory neutropenia (RN, characterized by 10% or more dysplastic cells in the bone marrow respective lineage. The diagnosis of RT and RN is complicated by several factors.  Diagnosing RT first requires exclusion of familial thrombocytopenia, chronic auto-immune thrombocytopenia, concomitant medications, viral infections, or hypersplenism. Diagnosis of RN should also be made after ruling out differential diagnoses such as ethnic or familial neutropenia, as well as acquired, drug-induced, infection-related or malignancy-related neutropenia. An accurate quantification of dysplasia should be performed in order to distinguish RT or RN from the provisional entity named idiopathic cytopenia of unknown significance (ICUS. Cytogenetic analysis, and possibly in the future somatic mutation analysis (of genes most frequently mutated in MDS, and flow cytometry analysis aberrant antigen expression on myeloid cells may help in this differential diagnosis. Importantly, we and others found that, while isolated neutropenia and thrombocytopenia are not rare in MDS, those patients can generally be classified (according to WHO 2008 classification as refractory cytopenia with multilineage dysplasia or refractory anemia with excess blasts, while RT and RN (according to WHO 2008 are quite rare.These results suggest in particular that identification of RT and RN as distinct entities could be reconsidered in future WHO classification updates.

  7. Refractory migraine in a headache clinic population

    Directory of Open Access Journals (Sweden)

    Fernandez-Torron Roberto

    2011-08-01

    Full Text Available Abstract Background Many migraineurs who seek care in headache clinics are refractory to treatment, despite advances in headache therapies. Epidemiology is poorly characterized, because diagnostic criteria for refractory migraine were not available until recently. We aimed to determine the frequency of refractory migraine in patients attended in the Headache Unit in a tertiary care center, according to recently proposed criteria. Methods The study population consisted of a consecutive sample of 370 patients (60.8% females with a mean age of 43 years (range 14-86 evaluated for the first time in our headache unit over a one-year period (between October 2008 and October 2009. We recorded information on clinical features, previous treatments, Migraine Disability Assessment Score (MIDAS, and final diagnosis. Results Overall migraine and tension-type headache were found in 46.4% and 20.5% of patients, respectively. Refractory migraine was found in 5.1% of patients. In refractory migraineurs, the mean MIDAS score was 96, and 36.8% were medication-overusers. Conclusions Refractory migraine is a relatively common and very disabling condition between the patients attended in a headache unit. The proposed operational criteria may be useful in identifying those patients who require care in headache units, the selection of candidates for combinations of prophylactic drugs or invasive treatments such as neurostimulation, but also to facilitate clinical studies in this patient group.

  8. Next Steps in Attachment Theory.

    Science.gov (United States)

    Bell, David C

    2012-12-01

    Thanks to the phenomenal success of attachment theory, great progress has been made in understanding child and adult relationships. The success of attachment theory opens the way to new research directions that can extend its successes even further. In particular, more work on the fundamental nature of attachment that respects recent biological research is important, as is concentrated effort on the related caregiving system.

  9. Next Steps in Attachment Theory

    OpenAIRE

    Bell, David C.

    2012-01-01

    Thanks to the phenomenal success of attachment theory, great progress has been made in understanding child and adult relationships. The success of attachment theory opens the way to new research directions that can extend its successes even further. In particular, more work on the fundamental nature of attachment that respects recent biological research is important, as is concentrated effort on the related caregiving system.

  10. Introduction: attachment theory and psychotherapy.

    Science.gov (United States)

    Levy, Kenneth N

    2013-11-01

    In this introduction to the JCLP: In Session 69(11) issue on attachment theory and psychotherapy, the key points of attachment theory (Bowlby, , , 1981) and its relevance to psychotherapy are briefly described. The aim of this issue is to provide case illustrations of how an attachment theory perspective and principles can expand our understanding of psychotherapy practice. © 2013 Wiley Periodicals, Inc.

  11. [Surgery of refractory ischemic arrhythmia].

    Science.gov (United States)

    Viganò, M; Graffigna, A; Salerno, G

    1992-03-01

    Since June 1980, 138 patients have undergone surgical treatment for refractory ventricular tachycardia due to ischemic heart disease. Electrically guided surgical ablation (EGSA) of the focus was performed in 117 patients, while 14 patients underwent application of automatic implantable cardioverter-defibrillator (AICD), and 8 patients underwent heart transplantation. During the whole period considered, among the EGSA patients an operative mortality of 13 patients was observed (11.4%), with a late mortality of another 14 patients (13.4%). Two early and six late recurrences were described, and 4 cases of sudden or unexplained death, with 2 cases clearly due to an arrhythmic event. Multivariate analysis showed preoperative ejection fraction lower than 25% as a powerful predictor of early mortality (32% vs 0%). Actuarial survival rate of patients with LVEF lower than 25% was 67 +/- 12% vs 95 +/- 2% at one year and 37 +/- 25% vs 94 +/- 8% at 8 years. A high operative mortality was then observed in patients who underwent aneurysmectomy alone or visually guided procedures as compared to electrically guided procedures (75% or 3 deaths out of 4 patients vs 8.5% or 10 out of 113 patients, respectively). Patients who received an AICD with or without associated procedures showed 1 case of in-hospital mortality and no late mortality; in 6 patients at least one shock was delivered; in two patients the AICD was implanted during an EGSA procedure, due to multiple or difficult origins of the arrhythmias. Of patients who underwent heart transplantation one case of later mortality was observed due to malignancy.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. High temperature resistant cermet and ceramic compositions. [for thermal resistant insulators and refractory coatings

    Science.gov (United States)

    Phillips, W. M. (Inventor)

    1978-01-01

    High temperature oxidation resistance, high hardness and high abrasion and wear resistance are properties of cermet compositions particularly to provide high temperature resistant refractory coatings on metal substrates, for use as electrical insulation seals for thermionic converters. The compositions comprise a sintered body of particles of a high temperature resistant metal or metal alloy, preferably molybdenum or tungsten particles, dispersed in and bonded to a solid solution formed of aluminum oxide and silicon nitride, and particularly a ternary solid solution formed of a mixture of aluminum oxide, silicon nitride and aluminum nitride. Ceramic compositions comprising a sintered solid solution of aluminum oxide, silicon nitride and aluminum nitride are also described.

  13. Impact of Maternal Attachment Style on Mother to Infant Attachment

    Directory of Open Access Journals (Sweden)

    V Moghaddam Hoseini

    2012-05-01

    Full Text Available

    Background and Objectives: Maternal attachment has the potential to affect both child development and parenting. As such, mother-infant attachment has been considered an important topic in recent years. The aim of this study was to determine the relationship between maternal adult attachment style, the maternal obstetric and demographic characteristics and mother-infant attachment.

     

    Methods: In this descriptive-correlational study, 102 women who had referred to health centers in Mashhad in 2008 and who had inclusion criteriawere selected using stratified cluster sampling. After interview about obstetric and demographic characteristics, they were asked to complete the "Revised Adult Attachment Scale" and "Mother to Infant Attachment Inventory" for assessment of maternal attachment style and mother-infant attachment 4-5 weeks after delivery. Data were analyzed by Pearson Correlation, Kruskal-wallis and Mann-whitney statistical tests.

     

    Results: In this study, themean of mother-infant attachment was found to be 97.48±6.12 and the mean of secure adult attachment was higher than that of other styles (16.89±3.97. Although, there were negative significant relationship between maternal avoidant style and mother-infant attachment (p=0.037,r=-0/20, there were no relationship between maternal age and education, parity, type of delivery and mother-infant attachment.

     

    Conclusion: The results of this research show that maternal attachment style is one of the factors of mother -infant attachment.

  14. Attachment is a dynamic system

    Directory of Open Access Journals (Sweden)

    Zlatka Cugmas

    2003-04-01

    Full Text Available On the basis of the study of recent scientific literature about the development of attachment, the author answers the following questions: which are the postulates the theory of attachment has about the stability of the patterns of attachment, which level of stability in the patterns of attachment from infancy to adulthood these studies illuminate and which factors significantly influence the (instability of the patterns of attachment in time. The theory of attachment assumes that normal circumstances elicit stability. Changes, however, can be the result of important events influencing the sensitivity of the object of attachment. Agreement has not yet been reached regarding the percentage of stability in the patterns of attachment. There is more agreement regarding attachment in adulthood than that in childhood. The results depend on the size and characteristics of the subjects of the research, the measuring instruments, type of data analysis etc. The author concludes that attachment is a dynamic system influenced by significant changes in life (the cognitive development of the child, external care, parents' divorce, different stressful situations. As the influence of stressful events on the individual person' s quality of attachment is examined, it is necessary to consider also his/her temperamental characteristics, role of other people in their lives, etc.

  15. Gonococcal attachment to eukaryotic cells

    International Nuclear Information System (INIS)

    James, J.F.; Lammel, C.J.; Draper, D.L.; Brown, D.A.; Sweet, R.L.; Brooks, G.F.

    1983-01-01

    The attachment of Neisseria gonorrhoeae to eukaryotic cells grown in tissue culture was analyzed by use of light and electron microscopy and by labeling of the bacteria with [ 3 H]- and [ 14 C]adenine. Isogenic piliated and nonpiliated N. gonorrhoeae from opaque and transparent colonies were studied. The results of light microscopy studies showed that the gonococci attached to cells of human origin, including Flow 2000, HeLa 229, and HEp 2. Studies using radiolabeled gonococci gave comparable results. Piliated N. gonorrhoeae usually attached in larger numbers than nonpiliated organisms, and those from opaque colonies attached more often than isogenic variants from transparent colonies. Day-to-day variation in rate of attachment was observed. Scanning electron microscopy studies showed the gonococcal attachment to be specific for microvilli of the host cells. It is concluded that more N. gonorrhoeae from opaque colonies, as compared with isogenic variants from transparent colonies, attach to eukaryotic cells grown in tissue culture

  16. Refractory versus resistant hypertension: Novel distinctive phenotypes

    Science.gov (United States)

    Dudenbostel, Tanja; Siddiqui, Mohammed; Gharpure, Nitin; Calhoun, David A.

    2017-01-01

    Resistant hypertension (RHTN) is relatively common with an estimated prevalence of 10-20% of treated hypertensive patients. It is defined as blood pressure (BP) >140/90 mmHg treated with ≥3 antihypertensive medications, including a diuretic, if tolerated. Refractory hypertension is a novel phenotype of severe antihypertensive treatment failure. The proposed definition for refractory hypertension, i.e. BP >140/90 mmHg with use of ≥5 different antihypertensive medications, including a diuretic and a mineralocorticoid receptor antagonist (MRA) has been applied inconsistently. In comparison to RHTN, refractory hypertension seems to be less prevalent than RHTN. This review focuses on current knowledge about this novel phenotype compared with RHTN including definition, prevalence, mechanisms, characteristics and comorbidities, including cardiovascular risk. In patients with RHTN excess fluid retention is thought to be a common mechanism for the development of RHTN. Recently, evidence has emerged suggesting that refractory hypertension may be more of neurogenic etiology due to increased sympathetic activity as opposed to excess fluid retention. Treatment recommendations for RHTN are generally based on use and intensification of diuretic therapy, especially with the combination of a long-acting thiazide-like diuretic and an MRA. Based on findings from available studies, such an approach does not seem to be a successful strategy to control BP in patients with refractory hypertension and effective sympathetic inhibition in such patients, either with medications and/or device based approaches may be needed. PMID:29034321

  17. Refractory of Furnaces to Reduce Environmental Impact

    Science.gov (United States)

    Hanzawa, Shigeru

    2011-10-01

    The energy load of furnaces used in the manufacturing process of ceramics is quite large. Most of the environmental impact of ceramics manufacturing is due to the CO2 produced from this high energy load. To improve this situation, R&D has focused on furnace systems and techniques of control in order to reduce energy load. Since furnaces are comprised of refractory, consideration of their mechanical and thermal characteristics is important. Herein are described several refractory types which were chosen through comparison of the characteristics which contribute to heat capacity reduction, heat insulating reinforcement and high emissivity, thereby improving thermal radiation heat transfer efficiency to the ceramic articles. One selected refractory material which will reduce the environmental impact of a furnace, chosen considering low heat capacity and high emissivity characteristics, is SiC. In this study, thermal radiation heat transfer efficiency improvement and its effect on ceramic articles in the furnace and oxidation behaviour were investigated at 1700K. A high density SiC refractory, built into the furnace at construction, has relatively high oxidation durability and has the ability to reduce environmental impact-CO2 by 10 percent by decreasing the furnace's energy load. However, new oxidation prevention techniques for SiC will be necessary for long-term use in industrial furnaces, because passive to active oxidation transition behaviour of commercial SiC refractory is coming to close ideal.

  18. Stochastic histories of refractory interstellar dust

    International Nuclear Information System (INIS)

    Liffman, K.; Chayton, D.D.

    1988-01-01

    The authors calculate histories for refractory dust particles in the interstellar medium. The double purposes are to learn something of the properties of interstellar dust as a system and to evaluate with specific assumptions the cosmic chemical memory interpretation of a specific class of isotopic anomalies. They assemble the profile of a particle population from a large number of stochastic, or Monte Carlo, histories of single particles, which are necessarily taken to be independent with this approach. They specify probabilities for each of the events that may befall a given particle and unfold its history by a sequence of random numbers. They assume that refractory particles are created only by thermal condensation within stellar material during its ejection from stars, and that these refractory particles can be destroyed only by being sputtered to a size too small for stability or by being incorporated into the formation of new stars. In order to record chemical detail, the authors take each new refractory particle to consist of a superrefractory core plus a more massive refractory mantle. They demonstrate that these superrefractory cores have effective lifetimes much longer than the turnover time of dust mass against sputtering. As examples of cosmic chemical memory they evaluate the 16 O-richness of interstellar aluminum and mechanisms for the 48 Ca/ 50 Ti correlation. Several related consequences of this approach are discussed

  19. Refractory of Furnaces to Reduce Environmental Impact

    International Nuclear Information System (INIS)

    Hanzawa, Shigeru

    2011-01-01

    The energy load of furnaces used in the manufacturing process of ceramics is quite large. Most of the environmental impact of ceramics manufacturing is due to the CO 2 produced from this high energy load. To improve this situation, R and D has focused on furnace systems and techniques of control in order to reduce energy load. Since furnaces are comprised of refractory, consideration of their mechanical and thermal characteristics is important. Herein are described several refractory types which were chosen through comparison of the characteristics which contribute to heat capacity reduction, heat insulating reinforcement and high emissivity, thereby improving thermal radiation heat transfer efficiency to the ceramic articles. One selected refractory material which will reduce the environmental impact of a furnace, chosen considering low heat capacity and high emissivity characteristics, is SiC. In this study, thermal radiation heat transfer efficiency improvement and its effect on ceramic articles in the furnace and oxidation behaviour were investigated at 1700K. A high density SiC refractory, built into the furnace at construction, has relatively high oxidation durability and has the ability to reduce environmental impact-CO 2 by 10 percent by decreasing the furnace's energy load. However, new oxidation prevention techniques for SiC will be necessary for long-term use in industrial furnaces, because passive to active oxidation transition behaviour of commercial SiC refractory is coming to close ideal.

  20. Attachment Theory in Tourism

    Directory of Open Access Journals (Sweden)

    Maximiliano Korstanje

    2007-01-01

    Full Text Available The following work is intended to a revision on attachment theory. The postulates of the theory of the sure base point that the system of exploration meets in narrow relation the system of conducts of attachment and the figure of the keepers. The conducts that characterize and symbolize the relation of the adult with the environment are carried back to the early age, in the moment in which the child develops the affective capacity. What difference does exist between someone who decides to journey to England and that one that one decides to travel to Mar del Plata? How it is possible to study this topic of on a manner trustworthy? These three questions were key to begin the investigation. Nevertheless, the matter began to find certain limitations linked to the methodology that had to be in use. It is possible to use careless they on the leisure scope, a theory which still demonstrates certain inconsistencies in its own clinical application?

  1. Ceramic blade attachment system

    Science.gov (United States)

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  2. Refractory silicides for integrated circuits

    International Nuclear Information System (INIS)

    Murarka, S.P.

    1980-01-01

    Transition metal silicides have, in the past, attracted attention because of their usefulness as high temperature materials and in integrated circuits as Schottky barrier and ohmic contacts. More recently, with the increasing silicon integrated circuits (SIC) packing density, the line widths get narrower and the sheet resistance contribution to the RC delay increases. The possibility of using low resistivity silicides, which can be formed directly on the polysilicon, makes these silicides highly attractive. The usefulness of a silicide metallization scheme for integrated circuits depends, not only on the desired low resistivity, but also on the ease with which the silicide can be formed and patterned and on the stability of the silicides throughout device processing and during actual device usage. In this paper, various properties and the formation techniques of the silicides have been reviewed. Correlations between the various properties and the metal or silicide electronic or crystallographic structure have been made to predict the more useful silicides for SIC applications. Special reference to the silicide resistivity, stress, and oxidizability during the formation and subsequent processing has been given. Various formation and etching techniques are discussed

  3. Electron attachment cross sections obtained from electron attachment spectroscopy

    International Nuclear Information System (INIS)

    Popp, P.; Baumbach, J.I.; Leonhardt, J.W.; Mothes, S.

    1988-01-01

    Electron capture detectors have a high sensitivity for substances with high thermal electron attachment cross sections. The electron attachment spectroscopy makes it possible to change the mean electron energy in such a way that the maximum for dissociative electron attachment is reached. Thus, best operation modes of the detection system as well as significant dependencies of electron attachment coefficients are available. Cross sections for electron attachment as a function of the electron energy are obtained with the knowledge of electron energy distribution functions from Boltzmann equation analysis by a special computer code. A disadvantage of this electron attachment spectroscopy is the superposition of space charge effects due to the decrease of the electron drift velocity with increasing mean electron energy. These influences are discussed. (author)

  4. Theoretical and practical aspects about corrosion of refractories used in steel metallurgy: part 3: characterization of commercial refractories

    International Nuclear Information System (INIS)

    Braganca, S.R.

    2012-01-01

    In this study, it was reviewed the main aspects found in the literature about refractories corrosion, evaluating the feasibility of certain tests and relating them with experimental results. The physical properties and microstructure of commercial refractories were analyzed, considering the differences between them and the quality implications and probable life of the refractory. Thus, it was studied the various types of refractories used as lining on steel ladle. Magnesia-carbon and doloma-carbon refractories were analyzed, highlighting the differences between them. The examined refractory showed characteristics favoring high resistance to corrosion process, presenting a series of properties to be selected in accordance with industry practice. (author)

  5. Biodegradable stents for the treatment of refractory or recurrent benign esophageal stenosis.

    Science.gov (United States)

    Imaz-Iglesia, Iñaki; García-Pérez, Sonia; Nachtnebel, Anna; Martín-Águeda, Belén; Sánchez-Piedra, Carlos; Karadayi, Bilgehan; Demirbaş, Ali Rıza

    2016-06-01

    Esophageal stents are used for the treatment of refractory and recurrent dyphagias. In 2007, esophageal biodegradable stents (EBS) were authorised as an alternative to existing metal and plastic stents in Europe. The advantages claimed for EBS are fewer complications concerning tissue ingrowth, stent migration and stent removal. We performed a systematic review to evaluate the efficacy and safety of EBS compared to fully-covered self-expanding metal stents, self-expanding plastic stents, and esophageal dilation for the treatment of refractory or recurrent benign esophageal stenosis. Three comparative studies (one randomized controlled trial and two cohort studies) were assessed. The studies used different inclusion criteria, had a very small (sample) size and the quality of the evidence was very low. Expert commentary: The current evidence is insufficient to determine the relative efficacy or safety of esophageal biodegradable stents. The results of this systematic review should be updated once new evidence is available.

  6. Roasting of refractory gold and silver concentrate; Tostacion de un concentrado refractario de oro y plata

    Energy Technology Data Exchange (ETDEWEB)

    Coraonado, J. H.; Encinas, M. A.; Leyva, M. A.; Valenzuela, J. L.; Valenzuela, A.; Munive, G. T.

    2012-11-01

    In processing of precious metal ores with high pyrite content, refractory concentrates are obtained, which are difficult to process. A refractory gold and silver concentrate was leached with sodium cyanide. Results show low extraction percentages, being 34 % of gold and 40 % of silver. A roasting method to oxidize the concentrate was used, making it more susceptible to cyanidation, hence a more efficient way to extract precious metals. The variables include roasting temperature and roasting and cyanidation time. In addition, the hot calcine was added to the leaching solution at room temperature to analyze the effect on particle size and recovery. The best results, although not entirely satisfactory (50 % of gold and 61 % of silver) were obtained by roasting the concentrate for 4 h at 600 degree centigrade, followed by cyanidation for 20 h. The lime consumption to raise the pH to about 11.3 was increased markedly to 25 kg/m{sup 3}. (Author) 11 refs.

  7. Experimental constraints on heating and cooling rates of refractory inclusions in the early solar system

    International Nuclear Information System (INIS)

    Boynton, W.V.

    1987-01-01

    The refractory inclusions in carbonaceous chondrites were the subject of considerable interest since their discovery. These inclusions contain minerals that are predicted to be some of the earliest condensates from the solar nebula, and contain a plethora of isotopic anomalies of unknown origin. Of particular interest are those coarse-grained inclusions that contain refractory metal particles (Fe, Ni, Pt, Ru, Os Ir). Experimental studies of these inclusions in terrestrial laboratories are, however, complicated because the dense particles tend to settle out of a molten or partially molten silicate material. Heating experiments in the Space Station technology and microgravity in order to observe the effects of metal nuggets (which may act as heterogeneous nucleation sites) on nucleation rates in silicate systems and to measure simultaneously the relative volatilization rate of siderophile and lithophile species. Neither experiment is possible in the terrestrial environment

  8. Friction measurements of steel on refractory bricks

    International Nuclear Information System (INIS)

    Eiselstein, L.E.

    1981-08-01

    During startup or shutdown of a pool-type LMFBR, substantial shear stresses may arise between the base of the steel reactor vessel and the refractory brick support base. The magnitude of these stresses, which result from differences in thermal expansion, can be estimated if the friction coefficient is known. This report describes experiments to determine friction coefficients between 2 1/4 Cr-1Mo steel and several refractory materials and to examine effects to contact pressure, temperature, sliding velocity, lubricants, and surface condition

  9. Chemical analysis of refractories by plasma spectrometry

    International Nuclear Information System (INIS)

    Coutinho, C.A.

    1990-01-01

    X-ray spectrometry has been, since the last two or three decades, the traditional procedure for the chemical analysis of refractories, due to its high degree of accuracy and speed to produce analytical results. An interesting alternative to X-ray fluorescence is provided by the Inductively Coupled Plasma Spectrometry technique, for those laboratories where wet chemistry facilities are already available or process control is not required at high speed, or investiment costs have to be low. This paper presents results obtained by plasma spectroscopy for the analysis of silico - aluminous refractories, showing calibration curves, precion and detection limits. Considerations and comparisons with X-ray fluorescence are also made. (author) [pt

  10. Steam explosion studies with single drops of molten refractory materials

    International Nuclear Information System (INIS)

    Nelson, L.S.

    1980-01-01

    Laser heating, levitation melting, and metal combustion were used to prepare individual drops of molten refractory materials which simulate LWR fuel melt products. Drop temperatures ranged from approx. = 1500 to > 3000K. These drops, several millimeters in diameter, were injected into water and subjected to pressure transients (approx. = 1MPa peak pressures) generated by a submerged exploding bridgewire. Molten oxides of Fe, Al and Zr could be induced to explode with bridgewire initiation. High speed films showed the explosions with exceptional clarity, and pressure transducer records could be correlated with individual frames in the films. Pressure spikes one or two MPa high were generated whenever an explosion occurred. Debris particles were mostly spheroidal, with diameters in the range 10 to 1000 μm

  11. Transformations in refractory compounds, caused by high pressures and temperatures

    International Nuclear Information System (INIS)

    Zajnulin, Yu.G.; Alyamovskij, S.I.; Shvejkin, G.P.

    1979-01-01

    Considered is the effect of high pressures and temperatures on structural features of refractory carbides, nitrides and monooxides of transition metals. The results are discussed on the basis of one component of the theory on daltonides and bertollides by N.S. Kurnakov - the theory of imaginary compounds, developed by G.B. Bokij. Several new ideas, resulting from this consideration, are formulated, It is shown that at high pressures and temperatures it is possible to obtain new electron modifications of compounds and to expand sufficiently the region of the existance of variable composition phases. The concept on imaginary compounds is shown to be true. A supposition is made on realization of numerous imaginary compounds at high pressures and temperatures. Other ways of production of imaginary compounds are recommended

  12. Quality Assessment of Refractory Protective Coatings Using Multi-Frequency Eddy Current MWM-Arrays

    International Nuclear Information System (INIS)

    Zilberstein, Vladimir; Evans, Leslie; Huguenin, Carolene; Grundy, David; Lyons, Robert; Goldfine, Neil; Mulligan, Christopher

    2006-01-01

    Demands for increased range, rate of fire, and muzzle velocity have prompted development of new refractory metal coatings. Nondestructive measurement of coating electrical conductivity and thickness is crucial to the process development and statistical process control. This paper presents absolute property coating characterization results for Ta coatings obtained with a Meandering Winding Magnetometer (MWM registered ) eddy-current sensor and MWM-Array sensor. The measured coating conductivity indicates the ratio of the intended α-Ta to the undesirable β-Ta

  13. Refractory disease in antineutrophil cytoplasmic antibodies associated vasculitis

    NARCIS (Netherlands)

    Rutgers, Abraham; Kallenberg, Cornelis

    Purpose of review Induction treatment of antineutrophil cytoplasmic antibodies (ANCA) associated vasculitis (AAV) is not always successful and nonresponding patients are considered refractory. Recent findings Refractory disease should be subdefined to the treatment that was received.

  14. Sentence-Level Attachment Prediction

    Science.gov (United States)

    Albakour, M.-Dyaa; Kruschwitz, Udo; Lucas, Simon

    Attachment prediction is the task of automatically identifying email messages that should contain an attachment. This can be useful to tackle the problem of sending out emails but forgetting to include the relevant attachment (something that happens all too often). A common Information Retrieval (IR) approach in analyzing documents such as emails is to treat the entire document as a bag of words. Here we propose a finer-grained analysis to address the problem. We aim at identifying individual sentences within an email that refer to an attachment. If we detect any such sentence, we predict that the email should have an attachment. Using part of the Enron corpus for evaluation we find that our finer-grained approach outperforms previously reported document-level attachment prediction in similar evaluation settings.

  15. Normal and refractory concretes for LMFBR applications. Volume 1. Review of literature on high-temperature behavior of portland cement and refractory concretes. Final report

    International Nuclear Information System (INIS)

    Bazant, Z.P.; Chern, J.C.; Abrams, M.S.; Gillen, M.P.

    1982-06-01

    The extensive literature on the properties and behavior at elevated temperature of portland cement concrete and various refractory concretes was reviewed to collect in concise form the physical and chemical properties of castable refractory concretes and of conventional portland cement concretes at elevated temperature. This survey, together with an extensive bibliography of source documents, is presented in Volume 1. A comparison was made of these properties, the relative advantages of the various concretes was evaluated for possible liquid metal fast breeder reactor applications, and a selection was made of several materials of interest for such applications. Volume 2 concludes with a summary of additional knowledge needed to support such uses of these materials together with recommendations on research to provide that knowledge

  16. Interferences in place attachment: implications for wilderness

    Science.gov (United States)

    Erin K. Sharpe; Alan W. Ewert

    2000-01-01

    Previous research on place attachment has tended to focus on attachment formation, with relatively little attention given to factors that disrupt or interfere with formed place attachments. Interferences to attachments are a worthy research area for two reasons: 1) The factors of place attachment are often more salient when being disrupted, and 2) place attachment...

  17. Using attachment theory in mentoring.

    Science.gov (United States)

    Miles, Kerri

    Attachment theory is a useful way to understand the bond between children and the people with whom they have emotional ties--usually caregivers. The theory can also help us to understand any adult relationship that provides closeness and a sense of attachment, especially in times of stress or need. Understanding the nature, cause and effect of the role and function of attachment from a training and development perspective, and different styles of attachment, may improve the quality of the mentoring experience for both mentors and mentees.

  18. Refractory metal carbide coatings for LMFBR applications: a systems approach

    International Nuclear Information System (INIS)

    Gotschall, H.L.; Ople, F.S.; Riccardella, P.C.

    1975-01-01

    The selection, testing and improvement of high density, tightly bonded plasma and detonation gun coatings designed to meet LMFBR core component criteria are described. The process descriptions include a review of the important developments in substrate surface preparation which were required to ensure strong bonding and to minimize interface contamination. Coating finishing techniques which were developed to optimize friction behavior are also described

  19. Thermal fatigue of refractory metal / graphite composites for fusion applications

    International Nuclear Information System (INIS)

    Smid, I.; Nickel, H.

    1989-01-01

    Reactor grade graphite and molybdenum (TZM) were brazed with different high temperature brazes. The resulting composite tiles had a size of 50 mm x 50 mm with a graphite thickness of 10 mm and a TZM thickness of 5mm. The brazed composites have been tested in electron beam simulation for their thermal fatigue properties. The parameters of these tests were chosen to match NET design specifications for normal operation and 'slow' peak energy deposition. The resulting damages and microstructural changes on the graphites and the brazes are discussed. Additional information is supplied on X-ray diffraction data proving the presence of different phases in the brazes. Finally the influence of a hydrogen plasma on the adaptability of the investigated brazes in fusion devices is discussed. 12 refs., 4 tabs., 4 figs. (Author)

  20. Development of brazing procedure for refractory metals of MHD channel

    International Nuclear Information System (INIS)

    Shibalov, M.V.; Belkin, E.Ya.

    1983-01-01

    A wide range of electric insulation oxidix materials for the channel of MHD-generator is considered. Insulators on the basis of magnesium, aluminium oxides, zirconates have practical value and application. Electromelted magnesium oxide is considered as electric insulation material for the channel, it is widely used for electric insulation in U-02 and U-25 installations at the temperature up to 1900 deg C. Ways of increasing heat resistance and improvement of other properties of magnesian ceramics are disclosed. Investigations into application of non-calcinated oxidic compositions as insulators are conducted

  1. Exploratory Study of Bend Ductility of Selected Refractory Metal Weldments

    National Research Council Canada - National Science Library

    Sinclair, John

    1965-01-01

    .... Bead-on-plate welds were made on the materials by using the electron-beam process or by using the gas tungsten process in argon atmosphere containing either 2 to 4 ppm oxygen with the moisture level...

  2. Refractory metal nuggets in different types of cosmic spherules.

    Digital Repository Service at National Institute of Oceanography (India)

    Rudraswami, N.G.; ShyamPrasad, M.; Plane, J.M.C.; Berg, T.; Feng, W.; Balgar, S.

    a fremdling-like object in a cosmic spherule which has a nugget encased in Fe–Ni and sulfide phases, similar to those typically observed in CAIs of CV or CO chondrites. The atmospheric entry for this rare cosmic spherule appears to have taken place...

  3. DISILICIDE BASE REFRACTORY METAL COATINGS IN SPACE ENVIRONMENT

    Energy Technology Data Exchange (ETDEWEB)

    Bocarsly, Sidney I.

    1963-03-15

    Studies of probable effects of space environment exposure of Durak B'' (a Chromizing Corp. proprietary disilicide coating) coated Mo are described. It was concluded that, in a high-temperature environment, solar radiation will not affect the material system. Sputtering will not cause a structural problem, but it may cause a change in optical properties. Meteoroids may cause coating spalling and minimum to possibly total failure. Some protection system will probably be necessary. Vacuum will cause some coating evaporation. The rate will be temperature-dependent and probably of a low order. The possible problem area is that the evaporation appears to occur preferentially at crack sites. Ionized nitrogen and hydrogen may react with the coating and charge physical or mechanical properties. (A.G.W.)

  4. Combined copper/zinc attachment to prion protein

    Science.gov (United States)

    Hodak, Miroslav; Bernholc, Jerry

    2013-03-01

    Misfolding of prion protein (PrP) is responsible for diseases such as ``mad-cow disease'' in cattle and Creutzfeldt-Jacob in humans. Extensive experimental investigation has established that this protein strongly interacts with copper ions, and this ability has been linked to its still unknown function. Attachment of other metal ions (zinc, iron, manganese) have been demonstrated as well, but none of them could outcompete copper. Recent finding, however, indicates that at intermediate concentrations both copper and zinc ions can attach to the PrP at the octarepeat region, which contains high affinity metal binding sites. Based on this evidence, we have performed density functional theory simulations to investigate the combined Cu/Zn attachment. We consider all previously reported binding modes of copper at the octarepeat region and examine a possibility simultaneous Cu/Zn attachment. We find that this can indeed occur for only one of the known binding sites, when copper changes its coordination mode to allow for attachment of zinc ion. The implications of the simultaneous attachment on neural function remain to be explored.

  5. Systemic therapy and attachment narratives: Attachment Narrative Therapy.

    Science.gov (United States)

    Dallos, Rudi; Vetere, Arlene

    2014-10-01

    This article outlines an integration of attachment theory with narrative theory and systemic theory and practice: Attachment Narrative Therapy (ANT). This integration offers a more powerful explanatory formulation of the development and maintenance of human distress in relationships, families and communities, and gives direction to psychotherapeutic intervention. © The Author(s) 2014.

  6. From security to attachment : Mary Ainsworth's contribution to attachment theory

    NARCIS (Netherlands)

    Rosmalen, Lenette (Lenny) van

    2015-01-01

    Even though John Bowlby (1907-1990) is generally regarded as the founder of attachment theory, Mary Ainsworth’s (1913-1999) contribution is considerable and goes beyond the design of the Strange Situation Procedure and the introduction of maternal sensitivity as decisive for a secure attachment

  7. Iatrogenic colorectal Kaposi sarcoma complicating a refractory ...

    African Journals Online (AJOL)

    Kaposi sarcoma is a mesenchymal tumor associated to a human herpes virus-8. It often occurs in human immunodeficiency virus-positive subjects. Colorectal localization is rare. We report the case of a colorectal Kaposi sarcoma complicating a refractory ulcerative colitis treated with surgery after the failure of ...

  8. Decision Making during the Psychological Refractory Period

    NARCIS (Netherlands)

    Zylberberg, Ariel; Ouellette, Brian; Sigman, Mariano; Roelfsema, Pieter R.

    2012-01-01

    In spite of its massively parallel architecture [1], the human brain is fundamentally limited if required to perform two tasks at the same time [2, 3]. This limitation can be studied with the psychological refractory period (PRP) paradigm, where two stimuli that require speeded responses occur in

  9. Service life prediction for refractory materials

    Czech Academy of Sciences Publication Activity Database

    Boccaccini, D. N.; Cannio, M.; Volkov-Husović, T. D.; Kamseu, E.; Romagnoli, M.; Veronesi, P.; Leonelli, C.; Dlouhý, Ivo; Boccaccini, A. R.

    2008-01-01

    Roč. 43, č. 12 (2008), s. 4079-4090 ISSN 0022-2461 R&D Projects: GA ČR(CZ) GA106/05/0495 Institutional research plan: CEZ:AV0Z20410507 Keywords : refractory materials * ultrasonic velocity * fracture toughness Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 1.181, year: 2008

  10. Bone hydatid disease refractory to nitazoxanide treatment

    NARCIS (Netherlands)

    Schipper, Hans G.; Simsek, Suat; van Agtmael, Michiel A.; van Lienden, Krijn P.

    2009-01-01

    We report a patient with bone hydatid disease that was refractory to both long-term daily treatment with albendazole, combined with cimetidine or administered as monotherapy ( approximately 15 years) and a relatively short course of nitazoxanide combined with albendazole (3 months). Despite

  11. Clinical Features of Refractory Ascites in Outpatients

    Directory of Open Access Journals (Sweden)

    Wanda Regina Caly

    Full Text Available OBJECTIVES: To present the clinical features and outcomes of outpatients who suffer from refractory ascites. METHODS: This prospective observational study consecutively enrolled patients with cirrhotic ascites who submitted to a clinical evaluation, a sodium restriction diet, biochemical blood tests, 24 hour urine tests and an ascitic fluid analysis. All patients received a multidisciplinary evaluation and diuretic treatment. Patients who did not respond to the diuretic treatment were controlled by therapeutic serial paracentesis, and a transjugular intrahepatic portosystemic shunt was indicated for patients who required therapeutic serial paracentesis up to twice a month. RESULTS: The most common etiology of cirrhosis in both groups was alcoholism [49 refractory (R and 11 non-refractory ascites (NR]. The majority of patients in the refractory group had Child-Pugh class B cirrhosis (p=0.034. The nutritional assessment showed protein-energy malnutrition in 81.6% of the patients in the R group and 35.5% of the patients in the NR group, while hepatic encephalopathy, hernia, spontaneous bacterial peritonitis, upper digestive hemorrhage and type 2 hepatorenal syndrome were present in 51%, 44.9%, 38.8%, 38.8% and 26.5% of the patients in the R group and 9.1%, 18.2%, 0%, 0% and 0% of the patients in the NR group, respectively (p=0.016, p=0.173, p=0.012, p=0.012, and p=0.100, respectively. Mortality occurred in 28.6% of the patients in the R group and in 9.1% of the patients in the NR group (p=0.262. CONCLUSION: Patients with refractory ascites were malnourished, suffered from hernias, had a high prevalence of complications and had a high postoperative death frequency, which was mostly due to infectious processes.

  12. Protein Attachment on Nanodiamonds.

    Science.gov (United States)

    Lin, Chung-Lun; Lin, Cheng-Huang; Chang, Huan-Cheng; Su, Meng-Chih

    2015-07-16

    A recent advance in nanotechnology is the scale-up production of small and nonaggregated diamond nanoparticles suitable for biological applications. Using detonation nanodiamonds (NDs) with an average diameter of ∼4 nm as the adsorbents, we have studied the static attachment of three proteins (myoglobin, bovine serum albumin, and insulin) onto the nanoparticles by optical spectroscopy, mass spectrometry, and dynamic light scattering, and electrophoretic zeta potential measurements. Results show that the protein surface coverage is predominantly determined by the competition between protein-protein and protein-ND interactions, giving each protein a unique and characteristic structural configuration in its own complex. Specifically, both myoglobin and bovine serum albumin show a Langmuir-type adsorption behavior, forming 1:1 complexes at saturation, whereas insulin folds into a tightly bound multimer before adsorption. The markedly different adsorption patterns appear to be independent of the protein concentration and are closely related to the affinity of the individual proteins for the NDs. The present study provides a fundamental understanding for the use of NDs as a platform for nanomedical drug delivery.

  13. Attachment, caring and prosocial behavior

    NARCIS (Netherlands)

    Erez, Ayelet

    2007-01-01

    The thesis focuses on 5 studies examining the role of adult attachment in volunteering by defining volunteerism as a form of caregiving. By that we suggest an effect of one behavioral system, attachment, on another, caring or prosocial behaviors in individual or group settings. Studies 1 and 2

  14. Potential refractory alloy requirements for space nuclear power applications

    International Nuclear Information System (INIS)

    Cooper, R.H. Jr.

    1984-01-01

    In reviewing design requirements for refractory alloys for space nuclear applications, several key points are identified. First, the successful utilization of refractory alloys is considered an enabling requirement for the successful deployment of high efficiency, lightweight, and small space nuclear systems. Second, the recapture of refractory alloy nuclear technology developed in the 1960s and early 1970s appears to be a pacing activity in the successful utilization of refractory alloys. Third, the successful application of refractory alloys for space nuclear applications will present a significant challenge to both the materials and the systems design communities

  15. Attachment and Dyadic Regulation Processes.

    Science.gov (United States)

    Overall, Nickola C; Simpson, Jeffry A

    2015-02-01

    Insecurely attached people have relatively unhappy and unstable romantic relationships, but the quality of their relationships depends on how their partners regulate them. Some partners find ways to regulate the emotional and behavioral reactions of insecurely attached individuals, which promotes greater relationship satisfaction and security. We discuss attachment theory and interdependence dilemmas, and then explain how and why certain responses by partners assuage the cardinal concerns of insecure individuals in key interdependent situations. We then review recent studies illustrating how partners can successfully regulate the reactions of anxiously and avoidantly attached individuals, yielding more constructive interactions. We finish by considering how these regulation processes can create a more secure dyadic environment, which helps to improve relationships and attachment security across time.

  16. Adult Attachment Style and Suicidality.

    Science.gov (United States)

    Miniati, Mario; Callari, Antonio; Pini, Stefano

    2017-09-01

    There is evidence in the literature that adverse early attachment experiences and subsequent attachment insecurities during adulthood would lead to pessimism, low self-esteem, hopelessness and, ultimately, to suicide risk. This paper aims to review finding on the link between attachment style and suicidality. We searched the literature using the database of the U.S. National Center for Biotechnology Information (NCBI)-MedLine/Pubmed system from January 1992 until December 2016. We started with 1992 because, as far as we know, there are no published studies exploring the relationship between suicide and insecure attachment before that year. We considered reports published on the relationship between attachment style and suicidality. We applied several combinations of the following search terms: attachment, adult attachment style and suicidality, suicide, suicidal ideation, suicidal behavior or suicidal thoughts, and suicide attempts. We selected only English language studies. Research suggests that insecure attachment style, mostly anxious, and unresolved traumas are associated with an increased suicide risk. Few studies prospectively examined clinical course, comorbid psychiatric disorders, familial suicidality or other psychosocial factors. Further research is needed to highlight the nature of the link between attachment and suicidality. The presence of suicidal ideation and attempts might be a consequence of an underlying interaction between the emergence of psychiatrics symptoms, and the long-lasting presence of inadequate patterns of attachment. Within this context, Separation Anxiety Disorder, categorized in the DSM-5 as a condition not confined to childhood but as an anxiety disorder that may occur through the entire lifespan, might be the a key for the comprehension of this link. From a neurobiological point of view, the role of oxytocin remains unclear.

  17. Attaching Thermocouples by Peening or Crimping

    Science.gov (United States)

    Murtland, Kevin; Cox, Robert; Immer, Christopher

    2006-01-01

    Two simple, effective techniques for attaching thermocouples to metal substrates have been devised for high-temperature applications in which attachment by such conventional means as welding, screws, epoxy, or tape would not be effective. The techniques have been used successfully to attach 0.005- in. (0.127-mm)-diameter type-S thermocouples to substrates of niobium alloy C-103 and stainless steel 416 for measuring temperatures up to 2,600 F (1,427 C). The techniques are equally applicable to other thermocouple and substrate materials. In the first technique, illustrated in the upper part of the figure, a hole slightly wider than twice the diameter of one thermocouple wire is drilled in the substrate. The thermocouple is placed in the hole, then the edge of the hole is peened in one or more places by use of a punch (see figure). The deformed material at the edge secures the thermocouple in the hole. In the second technique a hole is drilled as in the first technique, then an annular relief area is machined around the hole, resulting in structure reminiscent of a volcano in a crater. The thermocouple is placed in the hole as in the first technique, then the "volcano" material is either peened by use of a punch or crimped by use of sidecutters to secure the thermocouple in place. This second technique is preferable for very thin thermocouples [wire diameter .0.005 in. (.0.127 mm)] because standard peening poses a greater risk of clipping one or both of the thermocouple wires. These techniques offer the following advantages over prior thermocouple-attachment techniques: . Because these techniques involve drilling of very small holes, they are minimally invasive . an important advantage in that, to a first approximation, the thermal properties of surrounding areas are not appreciably affected. . These techniques do not involve introduction of any material, other than the substrate and thermocouple materials, that could cause contamination, could decompose, or oxidize

  18. Pharmacotherapy for Refractory and Super-Refractory Status Epilepticus in Adults.

    Science.gov (United States)

    Holtkamp, Martin

    2018-03-01

    Patients with prolonged seizures that do not respond to intravenous benzodiazepines and a second-line anticonvulsant suffer from refractory status epilepticus and those with seizures that do not respond to continuous intravenous anesthetic anticonvulsants suffer from super-refractory status epilepticus. Both conditions are associated with significant morbidity and mortality. A strict pharmacological treatment regimen is urgently required, but the level of evidence for the available drugs is very low. Refractory complex focal status epilepticus generally does not require anesthetics, but all intravenous non-anesthetizing anticonvulsants may be used. Most descriptive data are available for levetiracetam, phenytoin and valproate. Refractory generalized convulsive status epilepticus is a life-threatening emergency, and long-term clinical consequences are eminent. Administration of intravenous anesthetics is mandatory, and drugs acting at the inhibitory gamma-aminobutyric acid (GABA) A receptor such as midazolam, propofol and thiopental/pentobarbital are recommended without preference for one of those. One in five patients with anesthetic treatment does not respond and has super-refractory status epilepticus. With sustained seizure activity, excitatory N-methyl-d-aspartate (NMDA) receptors are increasingly expressed post-synaptically. Ketamine is an antagonist at this receptor and may prove efficient in some patients at later stages. Neurosteroids such as allopregnanolone increase sensitivity at GABA A receptors; a Phase 1/2 trial demonstrated safety and tolerability, but randomized controlled data failed to demonstrate efficacy. Adjunct ketogenic diet may contribute to termination of difficult-to-treat status epilepticus. Randomized controlled trials are needed to increase evidence for treatment of refractory and super-refractory status epilepticus, but there are multiple obstacles for realization. Hitherto, prospective multicenter registries for pharmacological

  19. Estimation of sensing characteristics for refractory nitrides based gain assisted core-shell plasmonic nanoparticles

    Science.gov (United States)

    Shishodia, Manmohan Singh; Pathania, Pankaj

    2018-04-01

    Refractory transition metal nitrides such as zirconium nitride (ZrN), hafnium nitride (HfN) and titanium nitride (TiN) have emerged as viable alternatives to coinage metals based plasmonic materials, e.g., gold (Au) and silver (Ag). The present work assesses the suitability of gain assisted ZrN-, HfN- and TiN-based conventional core-shell nanoparticles (CCSNPs) and multilayered core-shell nanoparticles (MCSNPs) for refractive index sensing. We report that the optical gain incorporation in the dielectric layer leads to multifold enhancement of the scattering efficiency (Qsca), substantial reduction of the spectral full width at half maximum, and a higher figure of merit (FOM). In comparison with CCSNPs, the MCSNP system exhibits superior sensing characteristics such as higher FOM, ˜ 45% reduction in the critical optical gain, response shift towards the biological window, and higher degree of tunability. Inherent biocompatibility, growth compatibility, chemical stability and flexible spectral tuning of refractory nitrides augmented by superior sensing properties in the present work may pave the way for refractory nitrides based low cost sensing.

  20. Unique opportunities in powder injection molding of refractory and hard materials

    International Nuclear Information System (INIS)

    German, R.M.

    2001-01-01

    Powder injection molding (PIM) is a relatively new manufacturing process for the creation of complicated net-shapes outside the range usually possible via powder metallurgy technologies. This new process is now in production at more than 550 sites around the world. Although a small industry, PIM will soon pass $1 billion dollars (USA) in annual sales. This presentation overviews the PIM process, some of the new developments and some of the successes that have occurred with both refractory metals and hard metals. Example applications are seen in medical and dental devices, industrial components, wristwatches, jet engines, firearms, automotive components, and even hand tools. To help establish the novel growth opportunities, PIM is compared to other fabrication routes to better understand the design features arising with this new approach, providing a compelling case for substantial opportunities in the refractory and hard materials. Illustrations are provided of several components in production. New opportunities abound for the technology, since it eliminates the shape complexity barrier associated with die compaction and the cost of machining associated with complicated or dimensionally precise components. Further, a relative cost advantage exists for refractory and hard materials because PIM can use the same powders at the same prices as employed in alternative processes. Future successes will occur by early identification of candidate materials and designs. Early examples include tungsten heavy alloy components now reaching production rates of six million per month. (author)

  1. An unusual case of refractory wheeze

    Science.gov (United States)

    Ramesh, Venkat; Acharya, Vishak; Pai, Narasimha; Krishnan, Ananda

    2015-01-01

    A 37-year-old man presented with a history of episodic wheeze and breathlessness of 3 years’ duration refractory to treatment. Physical examination revealed diffuse expiratory polyphonic rhonchi while the remainder of the examination including the cardiac examination was reported as normal. Pulmonary function testing revealed mild obstruction with bronchodilator reversibility. The patient was discharged on a 6-month course of antitubercular treatment (ATT) as bronchial brush cytology (obtained via bronchoscopy) was positive for acid-fast bacilli. The patient presented after completing 6 months of ATT with persistent symptoms, a loud S1 and a mid-diastolic murmur at the apex. High-resolution CT of the chest showed bilateral dependent ground glass opacities. An echocardiogram revealed a left atrial myxoma, and normal RV size and pressures. The patient underwent successful surgical removal of the same, and made a complete recovery. Refractory wheeze is a very unusual presentation of a left atrial myxoma. PMID:25733086

  2. Universal precision sine bar attachment

    Science.gov (United States)

    Mann, Franklin D. (Inventor)

    1989-01-01

    This invention relates to an attachment for a sine bar which can be used to perform measurements during lathe operations or other types of machining operations. The attachment can be used for setting precision angles on vises, dividing heads, rotary tables and angle plates. It can also be used in the inspection of machined parts, when close tolerances are required, and in the layout of precision hardware. The novelty of the invention is believed to reside in a specific versatile sine bar attachment for measuring a variety of angles on a number of different types of equipment.

  3. In vitro retention force measurement for three different attachment systems for implant-retained overdenture

    Directory of Open Access Journals (Sweden)

    Kareem Mohammed Reda

    2016-01-01

    Conclusion: Regardless of the initial retention level of overdenture attachment, gradual loss of retention values is inevitable. However, the rate of retention loss in overdenture attachments is higher in types which comprised plastic parts within their components, rather than those totally made up of noble metals.

  4. Everything You Want To Know about Attachment.

    Science.gov (United States)

    Honig, Alice Sterling

    This paper discusses infant attachment, which it defines as a long-lasting emotional bond revealed when a child under stress seeks out and tries to stay close to a specific figure. The paper addresses: (1) What is attachment? Who are the pioneers in attachment theory?; (2) How do we notice attachment in action?; (3) Is attachment the only…

  5. Determination of the resistance to tensile fracture of refractory mixtures of gunite

    International Nuclear Information System (INIS)

    Gomez Sanchez, A; Tomba Martinez, A.G

    2004-01-01

    The determination of the mechanical properties of cooled refractory mixtures is useful since it allows the materials to be compared for the purposes of selection and reports on their degree of internal cohesion, green or calcination, so that their structural ability can be estimated, especially during installation. Given the testing difficulties originating in the fragility of the ceramic materials, the tension test is not generally used in refractories. However, ASTM C-307 94 determines the tensile strength of cured chemical-resistant materials, for which this work considered the possibility of testing cement-based monolithic refractories in this non conventional condition. The tensile resistance to the fracture of three different refractory mixtures (A, B 1 and B 2 ), used in heat repairing by gunite in coking ovens, that were characterized by chemical, granulometric, and mineralogical analysis pycnometric density measurements. The pieces for the tests ('bone' type: length = 75 mm, maximum width = 40 mm, minimum width = 25 mm, thickness = 10 - 25 mm) were prepared by ramming of mixtures of material/water in a metallic mold; they were sinterized (1200 o C, 1h) and characterized by measures of bulk density, porosity and observation of the surface texture, in green and calcinated. The tensile tests, based on ASTM C-307 94, were performed in an Instron model 4467 machine in open air, at room temperature and position control (0.5 mm/min). The following values were obtained, in kPa: AW347±308; B 1 W738±130; B 2 W604±64. These values were lower than those for the tensile fracture module (MOR), although they displayed an equivalent order: A≤B 2 ≤B 1 . This was related to the characteristics of each refractory mixture and at the end of the pieces tested (CW)

  6. Non-Contact Measurements of Creep Properties of Refractory Materials

    Science.gov (United States)

    Lee, Jonghyun; Bradshaw, Richard C.; Hyers, Robert W.; Rogers, Jan R.; Rathz, Thomas J.; Wall, James J.; Choo, Hahn; Liaw, Peter

    2006-01-01

    State-of-the-art technologies for hypersonic aircraft, nuclear electric/thermal propulsion for spacecraft, and more efficient jet engines are driving ever more demanding needs for high-temperature (>2000 C) materials. At such high temperatures, creep rises as one of the most important design factors to be considered. Since conventional measurement techniques for creep resistance are limited to about 17OO0C, a new technique is in demand for higher temperatures. This paper presents a non-contact method using electrostatic levitation (ESL) which is applicable to both metallic and non-metallic materials. The samples were rotated quickly enough to cause creep deformation by centrifugal acceleration. The deformation of the samples was captured with a high speed camera and then the images were analyzed to estimate creep resistance. Finite element analyses were performed and compared to the experiments to verify the new method. Results are presented for niobium and tungsten, representative refractory materials at 2300 C and 2700 C respectively.

  7. An unusual case of refractory wheeze

    OpenAIRE

    Ramesh, Venkat; Acharya, Vishak; Pai, Narasimha; Krishnan, Ananda

    2015-01-01

    A 37-year-old man presented with a history of episodic wheeze and breathlessness of 3?years? duration refractory to treatment. Physical examination revealed diffuse expiratory polyphonic rhonchi while the remainder of the examination including the cardiac examination was reported as normal. Pulmonary function testing revealed mild obstruction with bronchodilator reversibility. The patient was discharged on a 6-month course of antitubercular treatment (ATT) as bronchial brush cytology (obtaine...

  8. Molecular Determinants of Hormone Refractory Prostate Cancer

    Science.gov (United States)

    2017-07-01

    receptor is no longer essential for survival, collectively termed androgen pathway independent prostate cancer (APIPC) (Nelson, 2012). A subset of these...Reciprocal feedback regulation of PI3K and androgen receptor signaling in PTEN-deficient prostate cancer . Cancer Cell. 2011 May 17;19(5):575-86. Chen J, Li...2005a). The androgen receptor and signal-transduction pathways in hormone-refractory prostate cancer . Part 1: Modifications to the androgen receptor

  9. Plasma metallization

    International Nuclear Information System (INIS)

    Crowther, J.M.

    1997-09-01

    Many methods are currently used for the production of thin metal films. However, all of these have drawbacks associated with them, for example the need for UHV conditions, high temperatures, exotic metal precursors, or the inability to coat complex shaped objects. Reduction of supported metal salts by non-isothermal plasma treatment does not suffer from these drawbacks. In order to produce and analyse metal films before they become contaminated, a plasma chamber which could be attached directly to a UHV chamber with XPS capability was designed and built. This allowed plasma treatment of supported metal salts and surface analysis by XPS to be performed without exposure of the metal film to the atmosphere. Non-equilibrium plasma treatment of Nylon 66 supported gold(lll) chloride using hydrogen as the feed gas resulted in a 95% pure gold film, the remaining 5% of the film being carbon. If argon or helium were used as the feed gases during plasma treatment the resultant gold films were 100% pure. Some degree of surface contamination of the films due to plasma treatment was observed but was easily removed by argon ion cleaning. Hydrogen plasma reduction of glass supported silver(l) nitrate and palladium(ll) acetate films reveals that this metallization technique is applicable to a wide variety of metal salts and supports, and has also shown the ability of plasma reduction to retain the complex 'fern-like' structures seen for spin coated silver(l) nitrate layers. Some metal salts are susceptible to decomposition by X-rays. The reduction of Nylon 66 supported gold(lll) chloride films by soft X-rays to produce nanoscopic gold particles has been studied. The spontaneous reduction of these X-ray irradiated support gold(lll) chloride films on exposure to the atmosphere to produce gold rich metallic films has also been reported. (author)

  10. Alkaline sulfide pretreatment of an antimonial refractory Au-Ag ore for improved cyanidation

    Science.gov (United States)

    Alp, Ibrahim; Celep, Oktay; Deveci, Haci

    2010-11-01

    This paper presents the alkaline sulfide pretreatment of an antimonial refractory gold and silver ore. In the ore, gold occurs mainly as gold-silver alloys and as associated with quartz and framboidal pyrite grains, and, to a small extent, as the inclusions within antimonial sulfides. Silver is present extensively as antimonial sulfides such as andorite. Alkaline sulfide pretreatment was shown to allow the decomposition of the antimonial sulfide minerals (up to 98% Sb removal) and to remarkably improve the amenability of gold (e.g., from leaching. An increase in reagent concentration (1-4 mol/L Na2S or NaOH) and temperature (20-80°C), and a decrease in particle size seem to produce an enhancing effect on metal extraction. These findings suggest that alkaline sulfide leaching can be suitably used as a chemical pretreatment method prior to the conventional cyanidation for antimonial refractory gold and silver ores.

  11. Adult attachment style and anxiety

    DEFF Research Database (Denmark)

    Nielsen, Sara Kerstine Kaya; Lønfeldt, Nicole Nadine; Wolitzky-Taylor, Kate

    2017-01-01

    Although there is substantial evidence for the role of emotion regulation in the etiology and maintenance of anxiety disorders, knowledge about what contributes to emotion dysregulation is sparse. Attachment style is related to emotion regulation and anxiety symptoms, but these variables have rar...... knowledge to examine the mediating role of emotion regulation between attachment dimensions (avoidance and anxiety) and anxiety symptoms.......Although there is substantial evidence for the role of emotion regulation in the etiology and maintenance of anxiety disorders, knowledge about what contributes to emotion dysregulation is sparse. Attachment style is related to emotion regulation and anxiety symptoms, but these variables have...... rarely been examined together. Examining emotion dysregulation within the context of anxiety disorders through an attachment theory framework will lead to a better understanding of the etiology and maintenance of anxiety disorders. In the present study we combined theoretically and empirically derived...

  12. WEAVING THE FABRIC OF ATTACHMENT

    OpenAIRE

    Lindsay Stewart

    2011-01-01

    This article is the Keynote Address given at the 5th International Integrative Psychotherapy Association Conference in Vichy, France, April 21, 2011. In the article author describes development of secure attachment with the help of the case study.

  13. Attachment Narratives in Refugee Children

    DEFF Research Database (Denmark)

    De Haene, L.; Dalgård, Nina Thorup; Montgomery, E.

    2013-01-01

    J Trauma Stress. 2013 Jun;26(3):413-7. doi: 10.1002/jts.21820. Attachment narratives in refugee children: interrater reliability and qualitative analysis in pilot findings from a two-site study.......J Trauma Stress. 2013 Jun;26(3):413-7. doi: 10.1002/jts.21820. Attachment narratives in refugee children: interrater reliability and qualitative analysis in pilot findings from a two-site study....

  14. Evaluation of the reusing of MGO-C refractory brick in refractory mixes

    International Nuclear Information System (INIS)

    Silva, R.D.S. da; Braganca, S.R.

    2012-01-01

    The residue from the use of MgO-C refractories in electric arc furnace presents, mostly, magnesium oxide in its composition and some slag contamination and impurities from the process of electrofusion scrap iron/steel. In this study, it was studied the characteristics of this residue and reused through its introduction into a commercial refractory mix, employed as material of coating and repair. This refractory mix was tested by thermogravimetric analysis, compressive strength, evaluation of plasticity and porosity as well as aspects of its installation, such as adhesion in situ. Results showed that there potential for reuse with the introduction of the waste in commercial mix was 30%, with little loss of compressive strength and plasticity. (author)

  15. A 197Au and 57Fe Moessbauer study of the roasting of refractory gold ores

    International Nuclear Information System (INIS)

    Wagner, F.E.; Marion, P.

    1989-01-01

    The transformation of chemically bound gold into metallic gold during industrial scale roasting of an arsenical gold ore concentrate from the Fairview Mine, Eastern Transvaal, has been studied quantitatively by 197 Au Moessbauer spectroscopy. The iron compounds in the concentrate, mainly FeAsS and FeS 2 , and their transformations during roasting have been studied by 57 Fe Moessbauer spectroscopy. The bound gold is found to convert into the metal in parallel to the decomposition of FeAsS and the increase in cyanide leachability. This shows that the refractory character of the ore is caused by the chemical bonding of the gold rather than by the physical inclusion of small, discrete metallic particles in the matrix of FeAsS or FeS 2 . The ratio of the f-factors of gold bound in the FeAsS component of a refractory ore and of metallic gold was determined to be f(Au:FeAsS)/f(Au)=1.48 ± 0.09. (orig.)

  16. Diagnosis and management of refractory celiac disease: a systematic review.

    Science.gov (United States)

    Labidi, Asma; Serghini, Meriem; Karoui, Sami; Boubaker, Jalel; Filali, Azza

    2013-01-01

    Refractory celiac disease is defined by persisting malabsorptive symptoms in spite of a strict gluten free diet for at least 6 to 12 months. Alternatives to gluten free diet seem to be still controversial. To describe the clinical and epidemiologic aspects of refractory celiac disease, and to identify therapeutic options in this condition. Systematic review and critical analysis of observational studies, clinical trials and case reports that focused on diagnosis and management of refractory celiac disease. Refractory celiac disease can be classified as type 1 or type 2 according to the phenotype of intraepithelial lymphocytes. Great complications such as enteropathy-associated T-cell lymphoma may occur in a subgroup of these patients mainly in refractory celiac disease type 2. Curative therapies are still lacking. Refractory celiac disease remains a diagnosis of exclusion. Its prognosis remains still dismal by the absence yet of curative therapies. However, some new treatments seem to hold promise during few cohort-studies.

  17. Temperature and Thermal Stress Analysis of Refractory Products

    Directory of Open Access Journals (Sweden)

    Shaoyang Shi

    2013-05-01

    Full Text Available Firstly current status of temperature and thermal stress research of refractory product at home and aboard are analyzed. Finite element model of two classical refractory products is building by using APDL language. Distribution law of temperature and thermal stress of two typical refractory products-ladles and tundish are analyzed and their structures are optimized. Stress of optimal structure is dropped obviously, and operation life is increased effectively.

  18. Handbook of industrial refractories technology principles, types, properties and applications

    CERN Document Server

    Caniglia, Stephen

    1989-01-01

    Encompasses the entire range of industrial refractory materials and forms: properties and their measurement, applications, manufacturing, installation and maintenance techniques, quality assurance, and statistical process control.

  19. Refractory Coated/Lined Low Density Structures, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This project addresses the development of refractory coated or lined low density structures applicable for advanced future propulsion system technologies. The...

  20. An investigation into mineral processing of north Semnan refractory earth

    International Nuclear Information System (INIS)

    Aslani, S.; Samin-Bani-Hashemi, H.R.; Taghi-Zadeh, O.

    2002-01-01

    This paper is dealing with refractory earth of North Semnan. Having an area of 2000 square kilometers, Semnan province is mainly formed by sedimentary rocks with a verity of refractory earth, red earth and kaolin containing heavy minerals. The refractory earth of this area contains a considerable rate of aluminum oxide in shape of dia spore minerals, behemoth and gybsite along with heavy minerals of iron and titanium. To improve the quality of refractory earth, in order to be used in related industries, these minerals have to be separated. To assess the quality of refractory earth of North Semnan as the raw materials of refractory industries, their genesis and mineralogy properties have been precisely studied. Based on the rate of aluminium oxide of the refractory earth of North Semnan mines, a suitable mineral deposit has been selected for more investigation. Using XRD and X RF methods along with electronic and photo microscopes, the refractory earth and heavy minerals of them have been assessed. The elementary laboratory experiments of fragmentation and magnetic separation have been performed. It has been proved that the iron minerals can be separated and, therefore, the quality of the refractory earth can be improved. The separation of titanium minerals has to be investigated with other methods

  1. Activating Attachments Reduces Memories of Traumatic Images.

    Directory of Open Access Journals (Sweden)

    Richard A Bryant

    Full Text Available Emotional memories, and especially intrusive memories, are a common feature of many psychological disorders, and are overconsolidated by stress. Attachment theory posits that activation of mental representations of attachment figures can reduce stress and boost coping. This study tested the proposition that attachment activation would reduce consolidation of emotional and intrusive memories. Sixty-seven undergraduate students viewed subliminal presentations of traumatic and neutral images, which were preceded by subliminal presentations of either attachment-related images or non-attachment-related images; free recall and intrusive memories were assessed two days later. Participants with low avoidant attachment tendencies who received the attachment primes recalled fewer memories and reported fewer intrusions than those who received the non-attachment primes. Unexpectedly, those with high anxious attachment tendencies reported fewer memories. These findings generally accord with attachment theory, and suggest that consolidation of emotional memories can be moderated by activation of attachment representations.

  2. Biotechnology for the extractive metals industries

    Science.gov (United States)

    Brierley, James A.

    1990-01-01

    Biotechnology is an alternative process for the extraction of metals, the beneficiation of ores, and the recovery of metals from aqueous systems. Currently, microbial-based processes are used for leaching copper and uranium, enhancing the recovery of gold from refractory ores, and treating industrial wastewater to recover metal values. Future developments, emanating from fundamental and applied research and advances through genetic engineering, are expected to increase the use and efficiency of these biotechnological processes.

  3. Vacuum die attach for integrated circuits

    Science.gov (United States)

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  4. Oral tranexamic acid lightens refractory melasma.

    Science.gov (United States)

    Tan, Aaron Wei Min; Sen, Priya; Chua, Sze Hon; Goh, Boon Kee

    2017-08-01

    Melasma is a common acquired hyperpigmentary disorder, particularly among Asians and Hispanics, but its exact pathomechanism is poorly understood. Tranexamic acid has been found to lighten melasma by interfering with the interaction of melanocytes and keratinocytes by inhibiting the plasminogen/plasmin system. The aim was to evaluate the therapeutic effects of oral tranexamic acid in the treatment of melasma refractory to topical skin-lightening agents. This retrospective study analyses patients with melasma recruited from a tertiary dermatological centre in Singapore between 1 August 2009 and 31 March 2011. The patients chosen had refractory melasma treated with oral tranexamic acid 250 mg twice daily in addition to pre-existing combination topical therapy. Objective assessment using the physician's global assessment and melasma area and severity index (MASI) scores were performed based on a post-hoc analysis of photographic records by three independent physicians. A paired t-test was used to evaluate the changes in the MASI scores pre-therapy and post-treatment. Statistical significance was defined as P tranexamic acid for a mean period of 3.7 ± 0.33 months, in addition to combination topical therapy. Their mean age was 47.2 ± 1.61 years. The mean MASI scores after tranexamic acid treatment (2.7 ± 1.6) were significantly lower (P tranexamic acid can serve as a safe and useful adjunct in the treatment of refractory melasma. © 2016 The Australasian College of Dermatologists.

  5. Morphology study of refractory carbide powders

    International Nuclear Information System (INIS)

    Vavrda, J.; Blazhikova, Ya.

    1982-01-01

    Refractory carbides were investigated using JSM-U3 electron microscope of Joelco company at 27 KV accelerating voltage. Some photographs of each powder were taken with different enlargements to characterise the sample upon the whole. It was shown that morphological and especially topographic study of powders enables to learn their past history (way of fabrication and treatment). The presence of steps of compact particle fractures and cracks is accompanied by occurence of fine dispersion of carbides subjected to machining after facrication. On the contrary, the character of crystallographic surfaces and features of surface growth testify to the way of crystallization

  6. Refractory overactive bladder: Beyond oral anticholinergic therapy

    Science.gov (United States)

    Glinski, Ronald W.; Siegel, Steven

    2007-01-01

    Objectives: In this review, we discuss the treatment of refractory overactive bladder (OAB) that has not adequately responded to medication therapy and we propose an appropriate care pathway to the treatment of OAB. We also attempt to address the cost of OAB treatments. Materials and Methods: A selective expert review of the current literature on the subject of refractory OAB using MEDLINE was performed and the data is summarized. We also review our experience in treating refractory OAB. The role and outcomes of various treatment options for refractory OAB are discussed and combined therapy with oral anticholinergics is explored. Emerging remedies including intravesical botulinum toxin injection and pudendal neuromodulation are also reviewed, along with conventional surgical options. Results: In general behavioral therapy, pelvic floor electrical stimulation, magnetic therapy and posterior tibial nerve stimulation (PTNS), have shown symptom decreases in 50-80% of patients with OAB. Depending on the study, combination therapy with oral anticholinergics seems to improve efficacy of behavioral therapy and PTNS in approximately 10-30%. In multicenter, long-term randomized controlled trials, sacral neuromodulation has been shown to improve symptoms of OAB and OAB incontinence in up to 80% of the patients treated. Studies involving emerging therapies such as pudendal serve stimulation suggest that there may be a 15-20% increase in efficacy over sacral neuromodulation, but long-term studies are not yet available. Another emerging therapy, botulinum toxin, is also showing similar success in reducing OAB symptoms in 80-90% of patients. Surgical approaches, such as bladder augmentation, are a last resort in the treatment of OAB and are rarely used at this point unless upper tract damage is a concern and all other treatment options have been exhausted. Conclusion: The vast majority of OAB patients can be managed successfully by behavioral options with or without

  7. Refractory overactive bladder: Beyond oral anticholinergic therapy

    Directory of Open Access Journals (Sweden)

    Ronald W Glinski

    2007-01-01

    Full Text Available Objectives: In this review, we discuss the treatment of refractory overactive bladder (OAB that has not adequately responded to medication therapy and we propose an appropriate care pathway to the treatment of OAB. We also attempt to address the cost of OAB treatments. Materials and Methods: A selective expert review of the current literature on the subject of refractory OAB using MEDLINE was performed and the data is summarized. We also review our experience in treating refractory OAB. The role and outcomes of various treatment options for refractory OAB are discussed and combined therapy with oral anticholinergics is explored. Emerging remedies including intravesical botulinum toxin injection and pudendal neuromodulation are also reviewed, along with conventional surgical options. Results: In general behavioral therapy, pelvic floor electrical stimulation, magnetic therapy and posterior tibial nerve stimulation (PTNS, have shown symptom decreases in 50-80% of patients with OAB. Depending on the study, combination therapy with oral anticholinergics seems to improve efficacy of behavioral therapy and PTNS in approximately 10-30%. In multicenter, long-term randomized controlled trials, sacral neuromodulation has been shown to improve symptoms of OAB and OAB incontinence in up to 80% of the patients treated. Studies involving emerging therapies such as pudendal serve stimulation suggest that there may be a 15-20% increase in efficacy over sacral neuromodulation, but long-term studies are not yet available. Another emerging therapy, botulinum toxin, is also showing similar success in reducing OAB symptoms in 80-90% of patients. Surgical approaches, such as bladder augmentation, are a last resort in the treatment of OAB and are rarely used at this point unless upper tract damage is a concern and all other treatment options have been exhausted. Conclusion: The vast majority of OAB patients can be managed successfully by behavioral options with or

  8. Refractory concentrate gold leaching: Cyanide vs. bromine

    Science.gov (United States)

    Dadgar, Ahmad

    1989-12-01

    Gold extraction, recovery and economics for two refractory concentrates were investigated using cyanide and bromine reagents. Gold extractions for cyanide leaching (24-48 hours) and bromine leaching (six hours) were the same and ranged from 94 to 96%. Gold recoveries from bromine pregnant solutions using carbon adsorption, ion exchange, solvent extraction, and zinc and aluminum precipitation methods were better than 99.9%. A preliminary economic analysis indicates that chemical costs for cyanidation and bromine process are 11.70 and 11.60 respectively, per tonne of calcine processed.

  9. Refractory reverse amblyopia with atropine penalization

    Directory of Open Access Journals (Sweden)

    Preeti Ajit Patil

    2010-01-01

    Full Text Available Pharmacological penalization with atropine has been shown to be equally effective as conventional occlusion therapy in the treatment of amblyopia in children. Reverse amblyopia of the sound eye with atropine penalization has been reported before, but is more common in cases where the effect is augmented with optical penalization and is mostly reversible. We report a case of reverse amblyopia with atropine penalization, in a 4-year-old girl, which was refractory to treatment. This report highlights the need for strict monitoring of the vision in the sound eye and regular follow-up in children undergoing amblyopia treatment.

  10. Attachment for mass exchange apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Maksimenko, M.Z.; Maksimenko, M.M.; Prokopov, O.I.

    1982-01-01

    An attachment is proposed which contains a cylindrical housing in which the windows are profiled with inward bent windows. In order to improve the effectiveness of the attachment by increasing its surface, and mobility, the ends of the housing are equipped with inner annular partitions with radial cross sections. The sections of the partitions between them are bent inwards towards the forming housing in series, from the side of each section. The inward-bent sections of the partitions and the edges are directed to one side or to different sides.

  11. Structural Interfaces and Attachments in Biology

    CERN Document Server

    Birman, Victor; Genin, Guy

    2013-01-01

    Attachment of dissimilar materials in engineering and surgical practice is a perennial challenge. Bimaterial attachment sites are common locations for injury, repeated injury, and mechanical failure. Nature presents several highly effective solutions to the challenge of bimaterial attachment that differ from those found in engineering practice. Structural Interfaces and Attachments in Biology describes the attachment of dissimilar materials from multiple perspectives. The text will simultaneously elucidate natural bimaterial attachments and outline engineering principles underlying successful attachments to the communities of tissue engineers and surgeons. Included an in-depth analysis of the biology of attachments in the body and mechanisms by which robust attachments are formed, a review of current concepts of attaching dissimilar materials in surgical practice and a discussion of bioengineering approaches that are currently being developed. This book also: Provides the first comprehensive treatment of phys...

  12. Extracorporeal membrane oxygenation for refractory cardiac arrest

    Directory of Open Access Journals (Sweden)

    Steven A Conrad

    2017-01-01

    Full Text Available Extracorporeal cardiopulmonary resuscitation (ECPR is the use of rapid deployment venoarterial (VA extracorporeal membrane oxygenation to support systemic circulation and vital organ perfusion in patients in refractory cardiac arrest not responding to conventional cardiopulmonary resuscitation (CPR. Although prospective controlled studies are lacking, observational studies suggest improved outcomes compared with conventional CPR when ECPR is instituted within 30-60 min following cardiac arrest. Adult and pediatric patients with witnessed in-hospital and out-of-hospital cardiac arrest and good quality CPR, failure of at least 15 min of conventional resuscitation, and a potentially reversible cause for arrest are candidates. Percutaneous cannulation where feasible is rapid and can be performed by nonsurgeons (emergency physicians, intensivists, cardiologists, and interventional radiologists. Modern extracorporeal systems are easy to prime and manage and are technically easy to manage with proper training and experience. ECPR can be deployed in the emergency department for out-of-hospital arrest or in various inpatient units for in-hospital arrest. ECPR should be considered for patients with refractory cardiac arrest in hospitals with an existing extracorporeal life support program, able to provide rapid deployment of support, and with resources to provide postresuscitation evaluation and management.

  13. Evaluation of olivine refractories for TES

    Science.gov (United States)

    Gay, B. M.; Cochrane, R. L.; Palmour, H., III; Paisley, M. J.

    1982-02-01

    The principal objectives of this program are to (1) experimentally determine the degree of improvement in thermal and mechanical performance that can be obtained with an olivine thermal storage brick made of domestic materials using advanced processing techniques compared with state-of-the-art as represented by commercial European bricks, (2) conduct an assessment of existing German ceramic process technology and determine its adaptability to domestic raw materials and manufacturing practices, and (3) investigate, on a limited basis, method for further improvement of domestic-olivine brick. To date, accomplishments include (1) installation of improved, computer-based instrumentation, (2) the use of this system to determine performance characteristics of a set of heat storage refractories under cyclic use conditions, (3) acquisition of the services of a knowledgeable European consultant, (4) continued lab-scale process/property optimization studies, and (5) comparative testing of olivine-based and magnesite-based heat storage refractories in the calorimetric test facility at Purdue University.

  14. Engineering data bases for refractory alloys

    International Nuclear Information System (INIS)

    Cooper, R.H. Jr.; Harms, W.O.

    1985-01-01

    Refractory alloys based on niobium, molybdenum, tantalum, and tungsten are required for the multi-100kW(e) space nuclear reactor power concepts that have been assessed in the SP-100 Program because of the extremely high temperatures involved. A review is presented of the technology efforts on the candidate refractory alloys in the areas of availability/fabricability, mechanical properties, irradiation effects, and compatibility. Of the niobium-base alloys, only Nb-1Zr has a data base that is sufficiently comprehensive for the high level of confidence required in the reference-alloy selection process for the reactor concept to be tested in the Ground Engineering System (GES) Phase of the SP-100 Program. Based on relatively short-term tests, the alloy PWC-11 (Nb-1Zr-0.1C) appears to have significantly greater creep strength than Nb-1Zr; however, concerns as to whether this precipitation-hardened alloy will remain thermally stable during seven years of full-power reactor operation need to be resolved. Additional information on the reference GES alloy will be needed for the detailed engineering design of a space power system and the fabrication of prototypical GES test components. Expedient development and demonstration of an adequate total manufacturing capability will be required if a high risk of significant schedule slippages and cost overruns is to be avoided. 4 refs., 1 fig., 3 tabs

  15. Thermionic emission of cermets made of refractory carbides

    International Nuclear Information System (INIS)

    Samsonow, G.W.; Bogomol, I.W.; Ochremtschuk, L.N.; Podtschernjajewa, I.A.; Fomenko, W.S.

    1975-01-01

    In order to improve the resistance to thermal variations of refractory carbides having good behavior for thermionic emission, they have been combined with transition metals d. Thermionic emission was studied with cermets in compact samples. Following systems were examined: TiC-Nb, TiC-Mo, TiC-W, ZrC-Nb, ZrC-Mo, ZrC-W, WC-Mo with compositions of: 75% M 1 C-25% M 2 , 50%M 1 C-50%M 2 , 25%M 1 C-75%M 2 . When following the variation of electron emission energy phi versus the composition, it appears that in the range of mixed crystals (M 1 M 2 )C, phi decreases and the resistance to thermal variations of these phases is higher than that of individual carbides. The study of obtained cermets shows that their resistance to thermal variations is largely superior to the one of starting carbides; TiC and ZrC carbides, combined with molybdenum and tungsten support the highest number of thermic cycles

  16. Shunt attachment and method for interfacing current collection systems

    Science.gov (United States)

    Denney, Paul E.; Iyer, Natraj C.; Hannan, III, William F.

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  17. Corrosão de refratários utilizados na siderurgia. Parte III: caracterização de refratários comerciais Corrosion of refractories used in steel metallurgy. Part III: characterization of commercial refractories

    Directory of Open Access Journals (Sweden)

    S. R. Bragança

    2013-03-01

    Full Text Available Foi realizada uma revisão dos principais aspectos encontrados na literatura especializada sobre corrosão de refratários, avaliando-se a viabilidade de determinados ensaios e relacionando-se com resultados experimentais. As propriedades físicas e microestruturais de refratários comerciais foram estudadas, considerando-se as diferenças entre elas e implicações com a qualidade e provável vida útil do refratário. Assim, investigou-se os diversos tipos de refratários utilizados como revestimento em uma panela de aço, como de sobre-linha (freeboard, linha de escória e linha de metal. Os refratários magnésia-carbono e doloma-carbono foram avaliados, destacando-se também as diferenças entre eles. Os materiais analisados mostraram características favoráveis a uma elevada resistência ao processo de corrosão, apresentando uma série de propriedades a serem escolhidas de acordo com a prática industrial.The main aspects found in the literature about refractories corrosion were reviewed, evaluating the feasibility of certain tests and relating them with experimental results. The physical properties and microstructure of commercial refractories were analyzed, considering the differences between them and the quality implications and probable life of the refractory. Thus, this study comprised various types of refractories used as lining on steel ladle, as on freeboard, slag line and metal line. Magnesia-carbon and doloma-carbon refractories were analyzed, highlighting the differences between them. The examined materials showed characteristics favoring high resistance to corrosion process, presenting a series of properties to be selected in accordance with industry practice.

  18. Attachment Theory: Progress and Future Directions

    OpenAIRE

    Fearon, R. M. P.; Roisman, G. I.

    2017-01-01

    Attachment is a key subfield in the area of parenting and parent-child relationships research. In this brief overview, we summarise what we consider to be the state-of-the-art of attachment research, focusing primarily on the nature and significance of attachment in infancy and early childhood. We review 4 major topics that are central issues in the scientific literature on attachment: (1) the role of the environment in the development of attachment, (2) the intergenerational transmission of ...

  19. Effects of irradiation on properties of refractory alloys with emphasis on space power reactor applications

    International Nuclear Information System (INIS)

    Wiffen, F.W.

    1984-01-01

    The probable effects of irradiation on niobium and tungsten alloys in use as components of thermionic convertors in a space reactor were reviewed by the author in 1971. While considerably more data on refractory metals have been generated since that time, the data have not been reviewed with respect to space reactor applications. This paper attempts such a review. The approach used is to work from the most recently available review of irradiation effects for each alloy system (where such a review is available) and to discuss that review and more recent data judged to be the most useful in establishing likely behavior in high-temperature reactor service. 28 figures, 6 tables

  20. Ir-based refractory superalloys by pulse electric current sintering (PECS) process (II prealloyed powder)

    Science.gov (United States)

    Huang, C.; Yamabe-Mitarai, Y.; Harada, H.

    2002-02-01

    Five prealloyed powder samples prepared from binary Ir-based refractory superalloys were sintered at 1800 °C for 4 h by Pulse Electric Current Sintering (PECS). No metal loss was observed during sintering. The relative densities of the sintered specimens all exceeded 90% T.D. The best one was Ir-13% Hf with the density of 97.82% T.D. Phases detected in sintered samples were in accordance with the phase diagram as expected. Fractured surfaces were observed in two samples (Ir-13% Hf and Ir-15% Zr). Some improvements obtained by using prealloyed powders instead of elemental powders, which were investigated in the previous studies, were presented.

  1. Fire and explosion hazards of refractory compound powders

    International Nuclear Information System (INIS)

    Krivtsov, V.A.; Kostina, E.S.

    1978-01-01

    Data on fire and explosion hazards of refractory compound powders (HfC, ZrC,LaB 6 , ZrN, etc.) are presented. It is shown that refractory compounds can be fire- and exposion hazardous in various degrees. Qualitative and quantitative estimations of one of fire-hazard characteristics - smoldering temperature - are presented

  2. Intraepithelial lymphocytes in refractory celiac disease : lost in transition

    NARCIS (Netherlands)

    Schmitz, Frederike

    2014-01-01

    Refractory coeliac disease type II (RCDII) is a severe complication of coeliac disease. Whereas celiac disease can successfully be treated by the strict avoidance of gluten, refractory celiac patients show no remission despite a gluten-free diet. The pathology of RCDII is only partially understood,

  3. Ketogenic diet in 3 cases of childhood refractory status epilepticus

    DEFF Research Database (Denmark)

    Sort, Rune; Born, Alfred P; Pedersen, Karen N.

    2013-01-01

    Refractory status epilepticus (RSE) in children is associated with a significant risk of death or neurological morbidity. Recently attention has been drawn to the ketogenic diet (KD) as an acute treatment, as it has shown promise in controlling seizures in otherwise refractory status epilepticus...

  4. Variability of femoral muscle attachments.

    Science.gov (United States)

    Duda, G N; Brand, D; Freitag, S; Lierse, W; Schneider, E

    1996-09-01

    Analytical and experimental models of the musculoskeletal system often assume single values rather than ranges for anatomical input parameters. The hypothesis of the present study was that anatomical variability significantly influences the results of biomechanical analyses, specifically regarding the moment arms of the various thigh muscles. Insertions and origins of muscles crossing or attaching to the femur were digitized in six specimens. Muscle volumes were measured; muscle attachment area and centroid location were computed. To demonstrate the influence of inter-individual anatomic variability on a mechanical modeling parameter, the corresponding range of muscle moment arms were calculated. Standard deviations, as a percentage of the mean, were about 70% for attachment area and 80% for muscle volume and attachment centroid location. The resulting moment arms of the m. gluteus maximus and m. rectus femoris were especially sensitive to anatomical variations (SD 65%). The results indicate that sensitivity to anatomical variations should be analyzed in any investigation simulating musculoskeletal interactions. To avoid misinterpretations, investigators should consider using several anatomical configurations rather than relying on a mean data set.

  5. WEAVING THE FABRIC OF ATTACHMENT

    Directory of Open Access Journals (Sweden)

    Lindsay Stewart

    2011-09-01

    Full Text Available This article is the Keynote Address given at the 5th International Integrative Psychotherapy Association Conference in Vichy, France, April 21, 2011. In the article author describes development of secure attachment with the help of the case study.

  6. Mapping and measuring place attachment

    DEFF Research Database (Denmark)

    Brown, Greg; Raymond, Christopher Mark; Corcoran, Jonathan

    2015-01-01

    The concept of place attachment has been studied extensively across multiple disciplines but only recently with empirical measurement using public participation GIS (PPGIS) and related crowd-sourcing mapping methods. This research trialed a spatially explicit method for identifying place attachme...

  7. Fabrication of Metallic Hollow Nanoparticles

    Science.gov (United States)

    Kim, Jae-Woo (Inventor); Choi, Sr., Sang H. (Inventor); Lillehei, Peter T. (Inventor); Chu, Sang-Hyon (Inventor); Park, Yeonjoon (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor)

    2016-01-01

    Metal and semiconductor nanoshells, particularly transition metal nanoshells, are fabricated using dendrimer molecules. Metallic colloids, metallic ions or semiconductors are attached to amine groups on the dendrimer surface in stabilized solution for the surface seeding method and the surface seedless method, respectively. Subsequently, the process is repeated with additional metallic ions or semiconductor, a stabilizer, and NaBH.sub.4 to increase the wall thickness of the metallic or semiconductor lining on the dendrimer surface. Metallic or semiconductor ions are automatically reduced on the metallic or semiconductor nanoparticles causing the formation of hollow metallic or semiconductor nanoparticles. The void size of the formed hollow nanoparticles depends on the dendrimer generation. The thickness of the metallic or semiconductor thin film around the dendrimer depends on the repetition times and the size of initial metallic or semiconductor seeds.

  8. Material development for waste to energy plants. Overlay welding and refractory linings. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Noergaard Hansson, A.

    2011-02-15

    Waste is an extremely corrosive fuel. In order to recover a higher percentage of the energy in waste, waste incineration plants have developed from purely heat producing units to heat and power producing units. The change in concept results in higher material temperatures and thereby faster material degradation. As a result material failures have been observed in many waste incineration plants. The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the efficiency. The focus is on overlay welding and refractory linings. Inconel 625, alloy 50, alloy 686, and Super 625 offer equivalent corrosion protection at panel walls. 100% overlay performs better than 50% overlay. The corrosion morphology changes with increasing temperature from pitting and general corrosion to pitting and selective corrosion (dendritic core or grain boundaries). The previously observed detrimental effect of Fe on the corrosion resistance was not confirmed. It probably depends on factors such as microstructure of the alloy and local metal temperature. Ni-overlay also reduces the corrosion rates on superheater tubes. However, the superheater environment is less aggressive than the water wall environment. Failure of refractory linings is linked to excess porosity, detrimental reactions between raw materials and other mix constituents, volume growth reactions between base material and salt depositions, and thermal stress induced crack formation. Free water and not decomposition of hydrates causes spalling and cracking during the initial heating of refractory linings. Finite Element analysis confirms the stress levels between steel and refractory with the higher stress level at the top of the panel wall tube. A number of LCC mixes were formulated, adjusted and tested. Mixes with low open porosities ({approx} 10%) and state of the art resistance to KCl were achieved. (LN)

  9. Refractory alloy technology for space nuclear power applications

    International Nuclear Information System (INIS)

    Cooper, R.H. Jr.; Hoffman, E.E.

    1984-01-01

    Purpose of this symposium is twofold: (1) to review and document the status of refractory alloy technology for structural and fuel-cladding applications in space nuclear power systems, and (2) to identify and document the refractory alloy research and development needs for the SP-100 Program in both the short and the long term. In this symposium, an effort was made to recapture the space reactor refractory alloy technology that was cut off in midstream around 1973 when the national space nuclear reactor program began in the early 1960s, was terminated. The six technical areas covered in the program are compatibility, processing and production, welding and component fabrication, mechanical and physical properties, effects of irradiation, and machinability. The refractory alloys considered are niobium, molybdenum, tantalum, and tungsten. Thirteen of the 14 pages have been abstracted separately. The remaining paper summarizes key needs for further R and D on refractory alloys

  10. Refractory alloy technology for space nuclear power applications

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, R.H. Jr.; Hoffman, E.E. (eds.)

    1984-01-01

    Purpose of this symposium is twofold: (1) to review and document the status of refractory alloy technology for structural and fuel-cladding applications in space nuclear power systems, and (2) to identify and document the refractory alloy research and development needs for the SP-100 Program in both the short and the long term. In this symposium, an effort was made to recapture the space reactor refractory alloy technology that was cut off in midstream around 1973 when the national space nuclear reactor program began in the early 1960s, was terminated. The six technical areas covered in the program are compatibility, processing and production, welding and component fabrication, mechanical and physical properties, effects of irradiation, and machinability. The refractory alloys considered are niobium, molybdenum, tantalum, and tungsten. Thirteen of the 14 pages have been abstracted separately. The remaining paper summarizes key needs for further R and D on refractory alloys. (DLC)

  11. NOvel Refractory Materials for High Alkali, High Temperature Environments

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, J.G.; Griffin, R. (MINTEQ International, Inc.)

    2011-08-30

    Refractory materials can be limited in their application by many factors including chemical reactions between the service environment and the refractory material, mechanical degradation of the refractory material by the service environment, temperature limitations on the use of a particular refractory material, and the inability to install or repair the refractory material in a cost effective manner or while the vessel was in service. The objective of this project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al2O3 spinel or other similar magnesia/alumina containing unshaped refractory composition (castables, gunnables, shotcretes, etc) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques (in-situ phase formation, altered conversion temperatures, accelerated reactions, etc). This family of refractory compositions would then be tailored for use in high-temperature, highalkaline industrial environments like those found in the aluminum, chemical, forest products, glass, and steel industries. A research team was formed to carry out the proposed work led by Oak Ridge National Laboratory (ORNL) and was comprised of the academic institution Missouri University of Science and Technology (MS&T), and the industrial company MINTEQ International, Inc. (MINTEQ), along with representatives from the aluminum, chemical, glass, and forest products industries. The two goals of this project were to produce novel refractory compositions which will allow for improved energy efficiency and to develop new refractory application techniques which would improve the speed of installation. Also methods of hot installation were sought which would allow for hot repairs and on-line maintenance leading to reduced process downtimes and eliminating the need to cool and reheat process vessels.

  12. Talimogene Laherparepvec and Nivolumab in Treating Patients With Refractory Lymphomas or Advanced or Refractory Non-melanoma Skin Cancers

    Science.gov (United States)

    2018-05-21

    Adenoid Cystic Carcinoma; Adnexal Carcinoma; Apocrine Carcinoma; Eccrine Porocarcinoma; Extraocular Cutaneous Sebaceous Carcinoma; Hidradenocarcinoma; Keratoacanthoma; Malignant Sweat Gland Neoplasm; Merkel Cell Carcinoma; Microcystic Adnexal Carcinoma; NK-Cell Lymphoma, Unclassifiable; Non-Melanomatous Lesion; Paget Disease; Papillary Adenocarcinoma; Primary Cutaneous Mucinous Carcinoma; Refractory Anaplastic Large Cell Lymphoma; Refractory Mature T-Cell and NK-Cell Non-Hodgkin Lymphoma; Refractory Mycosis Fungoides; Refractory Primary Cutaneous T-Cell Non-Hodgkin Lymphoma; Refractory T-Cell Non-Hodgkin Lymphoma; Sezary Syndrome; Signet Ring Cell Carcinoma; Skin Basal Cell Carcinoma; Skin Basosquamous Cell Carcinoma; Skin Squamous Cell Carcinoma; Spiradenocarcinoma; Squamous Cell Carcinoma of Unknown Primary Origin; Stage III Skin Cancer; Stage IV Skin Cancer; Sweat Gland Carcinoma; Trichilemmocarcinoma; Vulvar Squamous Cell Carcinoma

  13. Intracerebroventricular morphine for refractory cancer pain: transitioning to the home setting.

    Science.gov (United States)

    Adolph, Michael D; Stretanski, Michael F; McGregor, John M; Rawn, Bonnie L; Ross, Patrick M; Benedetti, Costantino

    2010-08-01

    Refractory cancer pain may be effectively controlled by titrating intracerebroventricular (ICV) preservative-free opioid. In this case report, a continuous infusion of ICV morphine permitted our patient with lung cancer and painful spinal metastases to be discharged to home hospice with family. The approach exploits the high potency of morphine injected into cerebrospinal fluid (CSF). Sterile, injectable, preservative-free morphine is directly infused into CSF through a subcutaneous Ommaya reservoir placed under the scalp by a neurosurgeon, with an attached catheter passed through a burr hole in the skull with its tip in a cerebral ventricle. Although investigators have described home care of patients receiving intraspinal analgesics, no report describes the process of transitioning the patient receiving continuous ICV morphine infusion to the home setting.

  14. A view on the European Refractory Industry

    Directory of Open Access Journals (Sweden)

    Kreuels, N.

    2009-10-01

    Full Text Available The author refers to the basic role of the Refractory Industry within the context from raw material to the use of products and outlines the major important political, economic and technical impact of the future.

    En el presente artículo se revisa la situación actual de la industria refractaria en Europa y se dan unas perspectivas de futuro para el sector, destacando su importancia política, económica y técnica. Dentro de este contexto se da una visión tanto de la situación de las materias primas como de los distintos uso de los productos refractarios y sus tendencias de futuro.

  15. Gastric cancer associated with refractory cytomegalovirus gastritis.

    Science.gov (United States)

    Ueno, Masayuki; Shimodate, Yuichi; Yamamoto, Shumpei; Yamamoto, Hiroshi; Mizuno, Motowo

    2017-12-01

    Cytomegalovirus (CMV) sometimes causes gastritis, especially in immunocompromised patients, but whether CMV gastritis promotes the development of gastric cancer is unknown. Here, we report a case of gastric cancer that developed in the presence of CMV gastritis, which had been present for at least 4 years and was refractory to treatment. An 80-year-old woman had noted epigastric discomfort and appetite loss. Esophagogastroduodenoscopy revealed a shallow geographical ulcer extending from the upper body to the pylorus. Histological findings of the biopsy and serology were suggestive of CMV gastritis. Serum anti-Helicobacter pylori antibody test was positive, suggesting co-infection with CMV and H. pylori. Her gastritis was unimproved with repeated antiviral therapy and eradication of H. pylori. Thirty months later, wide-spread gastric cancer had developed. We suggest the possibility that the addition of chronic inflammation of CMV infection to H. pylori-induced gastritis facilitated the development of gastric cancer.

  16. Status Epilepticus and Refractory Status Epilepticus Management

    Science.gov (United States)

    Abend, Nicholas S.; Bearden, David; Helbig, Ingo; McGuire, Jennifer; Narula, Sona; Panzer, Jessica A.; Topjian, Alexis; Dlugos, Dennis J.

    2014-01-01

    Status epilepticus (SE) describes persistent or recurring seizures without a return to baseline mental status, and is a common neurologic emergency. SE can occur in the context of epilepsy or may be symptomatic of a wide range of underlying etiologies. The clinician’s aim is to rapidly institute care that simultaneously stabilizes the patient medically, identifies and manages any precipitant conditions, and terminates seizures. Seizure management involves “emergent” treatment with benzodiazepines followed by “urgent” therapy with other anti-seizure medications. If seizures persist then refractory SE is diagnosed and management options include additional anti-seizure medications or infusions of midazolam or pentobarbital. This paper reviews the management of pediatric SE and RSE. PMID:25727508

  17. Nonconsumable electrode assembly and use thereof for the electrolytic production of metals and silicon

    Science.gov (United States)

    Byrne, Stephen C.; Ray, Siba P.

    1984-01-01

    A nonconsumable electrode assembly suitable for use in the production of metal by electrolytic reduction of a metal compound dissolved in a molten salt, the assembly comprising a metal conductor attached to a ceramic electrode body by a metal bond on a portion of the body having a level of free metal or metal alloy sufficient to effect a metal bond.

  18. Transscleral Diode Laser Cyclophotocoagulation in Refractory Glaucoma

    Directory of Open Access Journals (Sweden)

    Gülfidan Bitirgen

    2012-12-01

    Full Text Available Pur po se: To evaluate the safety and efficacy of transscleral diode laser cyclophotocoagulation (TSDLC in advanced glaucoma refractory to medical or surgical treatment. Ma te ri al and Met hod: The data of subjects who were treated with TSDLC between 2009 and 2011 were retrospectively reviewed. Intraocular pressure before and after treatment, visual acuity, the number of medications and complications were analysed. Success was defined as final IOP of 6-22 mmHg with or without antiglaucomatous medications. Re sults: Thirty seven eyes of 37 patients were included in the study. Mean age of patients and mean follow-up time were 61.73±17.13 years (range: 19-80 years and 8.06±5.81 months (range: 3-22 months, respectively. Mean pretreatment IOP was 38.68±8.94 mmHg and IOP was 26.46±11.34 mmHg (p <0.01 at the second week, whereas it was 24.97±10.84 mmHg (p<0.01 at the last visit. IOP of less than 22 mmHg was achieved in 40.5% of eyes at the last visit. Mean treatment number per eye was 1.48±0.73, and more than one treatment was required in 13 (35.1% eyes. Preoperative and postoperative mean total antiglaucomatous medications were 3.14±1.18 and 2.76±1.23, respectively. No phthisis bulbi or persistent hypotonia developed during the follow-up period. Dis cus si on: TSDLC is an effective and safe method for the treatment of refractory glaucoma. It also served to reduce the number of antiglaucoma medications, thus improving both the quality of life of the patients and their compliance to therapy. (Turk J Ophthalmol 2012; 42: 434-7

  19. Destruction of Refractory Carbon in Protoplanetary Disks

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Dana E.; Blake, Geoffrey A. [Division of Geological and Planetary Sciences, California Institute of Technology, 1200 E. California Blvd., Pasadena, CA 91125 (United States); Bergin, Edwin A. [Department of Astronomy, University of Michigan, 1085 S. University, Ann Arbor, MI 48109-1107 (United States); Ciesla, Fred J. [Department of Geophysical Sciences, The University of Chicago, 5734 South Ellis Ave., Chicago, IL 60637 (United States); Visser, Ruud [European Southern Observatory, Karl-Schwarzschild-Str. 2, D-85748, Garching (Germany); Lee, Jeong-Eun [School of Space Research, Kyung Hee University, 1732, Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 17104 (Korea, Republic of)

    2017-08-10

    The Earth and other rocky bodies in the inner solar system contain significantly less carbon than the primordial materials that seeded their formation. These carbon-poor objects include the parent bodies of primitive meteorites, suggesting that at least one process responsible for solid-phase carbon depletion was active prior to the early stages of planet formation. Potential mechanisms include the erosion of carbonaceous materials by photons or atomic oxygen in the surface layers of the protoplanetary disk. Under photochemically generated favorable conditions, these reactions can deplete the near-surface abundance of carbon grains and polycyclic aromatic hydrocarbons by several orders of magnitude on short timescales relative to the lifetime of the disk out to radii of ∼20–100+ au from the central star depending on the form of refractory carbon present. Due to the reliance of destruction mechanisms on a high influx of photons, the extent of refractory carbon depletion is quite sensitive to the disk’s internal radiation field. Dust transport within the disk is required to affect the composition of the midplane. In our current model of a passive, constant- α disk, where α = 0.01, carbon grains can be turbulently lofted into the destructive surface layers and depleted out to radii of ∼3–10 au for 0.1–1 μ m grains. Smaller grains can be cleared out of the planet-forming region completely. Destruction may be more effective in an actively accreting disk or when considering individual grain trajectories in non-idealized disks.

  20. Esquizofrenia refratária Refractory schizophrenia

    Directory of Open Access Journals (Sweden)

    Helio Elkis

    2007-10-01

    Full Text Available OBJETIVO: O propósito deste artigo é o de revisar vários aspectos da esquizofrenia refratária levando em conta questões relacionadas à definição, aspectos clínicos, correlatos psicobiológicos, tratamentos farmacológicos e não farmacológicos, assim como preditores de resposta terapêutica. MÉTODO: Pesquisa no Medline, assim como artigos dos autores. RESULTADOS E CONCLUSÕES: Pelo menos um terço dos pacientes com esquizofrenia são refratários a tratamento com antipsicóticos e as evidências apontam a clozapina em monoterapia como a principal opção nesses casos. A politerapia com antipsicóticos não tem apoio em evidências. Ensaios clínicos recentes mostraram que a potencialização da clozapina com outros antipsicóticos não é superior ao placebo.OBJECTIVE: The aim of the present paper is to review the various aspects of refractory schizophrenia regarding issues such as definitions, clinical aspects, psychobiological correlates, pharmacological and non-pharmacological treatment options and predictors of treatment response. METHOD: Medline search as well as articles of the authors. RESULTS AND CONCLUSIONS: Refractory schizophrenia affects at least one third of patients with schizophrenia and the best evidence shows that is monotherapy with clozapine remains the mainstay for the treatment of such condition. Antipsychotic polipharmacy is not supported by current evidence and recent clinical trials have shown that clozapine augmentation with antipsychotics has no benefit over placebo.

  1. Attachment Styles of Dermatological Patients in Europe

    DEFF Research Database (Denmark)

    Szabó, Csanád; Altmayer, Anita; Lien, Lars

    2017-01-01

    Attachment styles of dermatological outpatients and satisfaction with their dermatologists were investigated within the framework of a multicentre study conducted in 13 European countries, organized by the European Society for Dermatology and Psychiatry. Attachment style was assessed with the Adult......, and experienced similar rates of anxiety in relationships as did the controls. Participants who had secure attachment styles reported stressful life events during the last 6 months significantly less often than those who had insecure attachment styles. Patients with secure attachment styles tended to be more...... satisfied with their dermatologist than did insecure patients. These results suggest that secure attachment of dermatological outpatients may be a protective factor in the management of stress....

  2. Refractory myasthenia gravis - clinical profile, comorbidities and response to rituximab.

    Science.gov (United States)

    Sudulagunta, Sreenivasa Rao; Sepehrar, Mona; Sodalagunta, Mahesh Babu; Settikere Nataraju, Aravinda; Bangalore Raja, Shiva Kumar; Sathyanarayana, Deepak; Gummadi, Siddharth; Burra, Hemanth Kumar

    2016-01-01

    Introduction: Myasthenia gravis (MG) is an antibody mediated autoimmune neuromuscular disorder characterized by fatigable muscle weakness. A proportion of myasthenia gravis patients are classified as refractory due to non responsiveness to conventional treatment. This retrospective study was done to evaluate clinical profile, epidemiological, laboratory, and features of patients with MG and mode of management using rituximab and complications. Methods: Data of myasthenia gravis patients admitted or presented to outpatient department (previous medical records) with MG between January 2008 and January 2016 were included. A total of 512 patients fulfilled the clinical and diagnostic criteria of myasthenia gravis of which 76 patients met the diagnostic certainty for refractory myasthenia gravis and were evaluated. Results: Out of 76 refractory MG patients, 53 (69.73%) patients fulfilled all the three defined criteria. The median age of onset of the refractory MG group was 36 years with a range of 27-53 years. In our study 25 patients (32.89%) belonged to the age group of 21-30 years. Anti-MuSK antibodies were positive in 8 non-refractory MG patients (2.06%) and 36 refractory MG patients (47.36%). Mean HbA 1C was found to be 8.6±2.33. The dose of administered prednisone decreased by a mean of 59.7% ( p =3.3x10 -8 ) to 94.6% ( p =2.2x10 -14 ) after the third cycle of rituximab treatment. Conclusion: The refractory MG patients are most commonly female with an early age of onset, anti-MuSK antibodies, and thymomas. Refractory MG patients have higher prevalence and poor control (HbA 1C >8%) of diabetes mellitus and dyslipidemia probably due to increased steroid usage. Rituximab is very efficient in treatment of refractory MG with adverse effects being low.

  3. Attachment theory: progress and future directions.

    Science.gov (United States)

    Fearon, R M Pasco; Roisman, Glenn I

    2017-06-01

    Attachment is a key subfield in the area of parenting and parent-child relationships research. In this brief overview, we summarise what we consider to be the state-of-the-art of attachment research, focusing primarily on the nature and significance of attachment in infancy and early childhood. We review 4 major topics that are central issues in the scientific literature on attachment: (1) the role of the environment in the development of attachment, (2) the intergenerational transmission of patterns of attachment, (3) the stability of attachment patterns through early adulthood, and (4) the role of attachment in adjustment and maladjustment. We conclude by highlighting several critical unresolved issues and priorities for future research. Copyright © 2017. Published by Elsevier Ltd.

  4. Dissociative attachment reactions of electrons with gas phase superacids

    International Nuclear Information System (INIS)

    Liu, X.

    1992-01-01

    Using the flowing afterglow Langmuir probe (FALP) technique, dissociative attachment coefficients β for reactions of electrons with gas phase superacids HCo(PF 3 ) 4 , HRh(PF 3 ) 4 and carbonyl hydride complexes HMn(CO) 5 , HRe(CO) 5 have been determined under thermal conditions over the approximate temperature range 300∼550 K. The superacids react relatively slowly ( max ) with free electrons in a thermal plasma, and the values of β obtained this far do not show a correlation between acidity and β. The pioneer researchers in this field had speculated that any superacid would be a rapid attacher of electrons; it was found that this speculation is not true in general. The product distribution of electron attachment reaction to HCo(PF 3 ) 4 was found to be independent of temperature even though the β[HCo(PF 3 ) 4 ] increases with temperature. This proposes that the electron attachment process occurs well before the excited complex dissociates. In addition, the activation energy of HCo(PF 3 ) 4 for electron attachment has been derived from the Arrhenius plots. The carbonyl hydride complexes, HMn(CO) 5 and HRe(CO) 5 , react relatively rapidly (>1/4 of β max ) with free electrons in thermal plasma. This indicates that these reactions cannot be significantly endothermic. Observation of rapid attachment for these non-superacids shows that the Mn-CO and Re-CO bonds are weaker than the Mn-H and Re-H bonds, respectively. Comparisons between the carbonyl and trifluorophosphine cases implies that fast electron capture is related more to the CO ligand than to the transition-metal species

  5. Biological opportunities for metal recovery

    International Nuclear Information System (INIS)

    Holmes, D.S.; Debus, S.H.

    1991-01-01

    An overview is presented of existing biological technologies for the recovery of copper and uranium. Engineering and biological challenges and opportunities in these areas are discussed. New opportunities for the bio oxidation of refractory goal ore are described. Techniques for the development of new strains of microorganisms for commercial metal recovery applications are discussed with special reference to the use of genetic manipulation for bacterial strain improvement. (author)

  6. Pack cementation diffusion coatings for Fe-base and refractory alloys. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, R.A. [Ohio State Univ., Columbus, OH (United States). Dept. of Materials Science and Engineering

    1998-03-10

    With the aid of computer-assisted calculations of the equilibrium vapor pressures in halide-activated cementation packs, processing conditions have been identified and experimentally verified for the codeposition of two or more alloying elements in a diffusion coating on a variety of steels and refractory metal alloys. A new comprehensive theory to treat the multi-component thermodynamic equilibria in the gas phase for several coexisting solid phases was developed and used. Many different processes to deposit various types of coatings on several types of steels were developed: Cr-Si codeposition for low- or medium-carbon steels, Cr-Al codeposition on low-carbon steels to yield either a Kanthal-type composition (Fe-25Cr-4Al in wt.%) or else a (Fe, Cr){sub 3}Al surface composition. An Fe{sub 3}Al substrate was aluminized to achieve an FeAl surface composition, and boron was also added to ductilize the coating. The developmental Cr-lean ORNL alloys with exceptional creep resistance were Cr-Al coated to achieve excellent oxidation resistance. Alloy wires of Ni-base were aluminized to provide an average composition of Ni{sub 3}Al for use as welding rods. Several different refractory metal alloys based on Cr-Cr{sub 2}Nb have been silicided, also with germanium additions, to provide excellent oxidation resistance. A couple of developmental Cr-Zr alloys were similarly coated and tested.

  7. A review of refractory materials for vapor-anode AMTEC cells

    Science.gov (United States)

    King, Jeffrey C.; El-Genk, M. S.

    2000-01-01

    Recently, refractory alloys have been considered as structural materials for vapor-anode Alkali Metal Thermal-to-Electric Conversion (AMTEC) cells, for extended (7-15 years) space missions. This paper reviewed the existing database for refractory metals and alloys of potential use as structural materials for vapor-anode sodium AMTEC cells. In addition to requiring that the vapor pressure of the material be below 10-9 torr (133 nPa) at a typical hot side temperature of 1200 K, other screening considerations were: (a) low thermal conductivity, low thermal radiation emissivity, and low linear thermal expansion coefficient; (b) low ductile-to-brittle transition temperature, high yield and rupture strengths and high strength-to-density ratio; and (c) good compatibility with the sodium AMTEC operating environment, including high corrosion resistance to sodium in both the liquid and vapor phases. Nb-1Zr (niobium-1% zirconium) alloy is recommended for the hot end structures of the cell. The niobium alloy C-103, which contains the oxygen gettering elements zirconium and hafnium as well as titanium, is recommended for the colder cell structure. This alloy is stronger and less thermally conductive than Nb-1Zr, and its use in the cell wall reduces parasitic heat losses by conduction to the condenser. The molybdenum alloy Mo-44.5Re (molybdenum-44.5% rhenium) is also recommended as a possible alternative for both structures if known problems with oxygen pick up and embrittlement of the niobium alloys proves to be intractable. .

  8. Attachment Theory, Foster Parents and Diversity Tolerance

    OpenAIRE

    Kenny, Michael; Fleming, Ted

    2009-01-01

    relevance to attachment within the biological and foster family. Yet every foster parent has a childhood attachment history that influences their interpersonal relationships in adulthood. The primary concern of the foster parent and their supports is with the foster child. But as a result the foster parent may distract or block reflection on their own attachment history. This presentation will focus on attachment theory and the adult, with particular reference to the foster parent. The pre...

  9. Attachment in Middle Childhood: Progress and Prospects

    Science.gov (United States)

    Bosmans, Guy; Kerns, Kathryn A.

    2015-01-01

    Contrary to the substantial amount of research on infant, preschool, adolescent, and adult attachment, middle childhood has long been neglected by the international attachment research community. In the past two decades, however, there has been a steep increase in research focusing on middle childhood attachment. This article provides an overview…

  10. Selection of refractory materials for pyrochemical processing

    International Nuclear Information System (INIS)

    Axler, K.M.; DePoorter, G.L.; Bagaasen, L.M.

    1991-01-01

    Several pyrochemical processing operations require containment materials that exhibit minimal chemical interactions with the system, good thermal shock resistance, and reusability. One example is Direct Oxide Reduction (DOR). DOR involves the conversion of PuO 2 to metal by an oxidation/reduction reaction with Ca metal. The reaction proceeds within a molten salt flux at temperatures above 800C. A combination of thermodynamics, system thermodynamic modeling, and experimental investigations are in use to select and evaluate potential containment materials

  11. Lightweight cordierite–mullite refractories with low coefficients of ...

    Indian Academy of Sciences (India)

    of thermal conductivity and high mechanical properties ... compositions and microstructures of lightweight refractories were measured by X-ray .... of matrices were determined by calibration with EDAX ZAF .... Guzman I Ya 2003 Glass Ceram.

  12. Ketogenic Diet in Super-Refractory Status Epilepticus

    OpenAIRE

    Smith, Garnett; Press, Craig A.

    2017-01-01

    Researchers from the Children’s National Health System in Washington, D.C. studied the feasibility, rate of complications, and effect on seizures of initiating the Ketogenic Diet (KD) in pediatric patients with Super-Refractory Status Epilepticus (SRSE).

  13. Effectiveness of botulinum toxin A in treatment of refractory erythromelalgia

    Directory of Open Access Journals (Sweden)

    Kuan-Hsiang Lin

    2013-05-01

    Full Text Available Erythromelalgia is characterized by intense burning pain, erythema, and heat in affected areas after precipitating factors such as warm temperature or stress. It is refractory to treatment in some situations. We describe a woman with adenosquamous cell carcinoma of the lung and medically refractory erythromelalgia. The symptoms of erythromelalgia presented as refractory to any medical treatment. Due to the unresponsive nature of her condition, botulinum toxin type A (onabotulinumtoxin A was injected over both of her cheeks, periodically for six cycles. Her symptoms responded dramatically to subcutaneous and intradermal injection of botulinum toxin type A. Repetitive injection demonstrated consistent and reproducible responses, and the efficacy was maintained for approximately 1 month. No adverse effects or complications were noted. Botulinum toxin type A might be safe and effective as an alternative treatment for refractory erythromelalgia, but further large-scale studies are required.

  14. Split ring containment attachment device

    International Nuclear Information System (INIS)

    Sammel, A.G.

    1996-01-01

    A containment attachment device is described for operatively connecting a glovebag to plastic sheeting covering hazardous material. The device includes an inner split ring member connected on one end to a middle ring member wherein the free end of the split ring member is inserted through a slit in the plastic sheeting to captively engage a generally circular portion of the plastic sheeting. A collar potion having an outer ring portion is provided with fastening means for securing the device together wherein the glovebag is operatively connected to the collar portion. 5 figs

  15. Refractory absence epilepsy associated with GLUT-1 deficiency syndrome.

    LENUS (Irish Health Repository)

    Byrne, Susan

    2011-05-01

    GLUT-1 deficiency syndrome (GLUT-1 DS) is a disorder of cerebral glucose transport associated with early infantile epilepsy and microcephaly. We report two boys who presented with refractory absence epilepsy associated with hypoglycorrhachia, both of whom have genetically confirmed GLUT-1 DS. We propose that these children serve to expand the phenotype of GLUT-1 DS and suggest that this condition should be considered as a cause of refractory absence seizures in childhood.

  16. [Therapy-resistant and therapy-refractory arterial hypertension].

    Science.gov (United States)

    Wallbach, M; Koziolek, M J

    2018-05-02

    Therapy-resistant and therapy-refractory arterial hypertension differ in prevalence, pathogenesis, prognosis and therapy. In both cases, a structured approach is required, with the exclusion of pseudoresistance and, subsequently, secondary hypertension. Resistant hypertension has been reported to be more responsive to intensified diuretic therapy, whereas refractory hypertension is presumed to require sympathoinhibitory therapy. Once the general measures and the drug-based step-up therapy have been exhausted, interventional procedures are available.

  17. Response properties of the refractory auditory nerve fiber.

    Science.gov (United States)

    Miller, C A; Abbas, P J; Robinson, B K

    2001-09-01

    The refractory characteristics of auditory nerve fibers limit their ability to accurately encode temporal information. Therefore, they are relevant to the design of cochlear prostheses. It is also possible that the refractory property could be exploited by prosthetic devices to improve information transfer, as refractoriness may enhance the nerve's stochastic properties. Furthermore, refractory data are needed for the development of accurate computational models of auditory nerve fibers. We applied a two-pulse forward-masking paradigm to a feline model of the human auditory nerve to assess refractory properties of single fibers. Each fiber was driven to refractoriness by a single (masker) current pulse delivered intracochlearly. Properties of firing efficiency, latency, jitter, spike amplitude, and relative spread (a measure of dynamic range and stochasticity) were examined by exciting fibers with a second (probe) pulse and systematically varying the masker-probe interval (MPI). Responses to monophasic cathodic current pulses were analyzed. We estimated the mean absolute refractory period to be about 330 micros and the mean recovery time constant to be about 410 micros. A significant proportion of fibers (13 of 34) responded to the probe pulse with MPIs as short as 500 micros. Spike amplitude decreased with decreasing MPI, a finding relevant to the development of computational nerve-fiber models, interpretation of gross evoked potentials, and models of more central neural processing. A small mean decrement in spike jitter was noted at small MPI values. Some trends (such as spike latency-vs-MPI) varied across fibers, suggesting that sites of excitation varied across fibers. Relative spread was found to increase with decreasing MPI values, providing direct evidence that stochastic properties of fibers are altered under conditions of refractoriness.

  18. Design of Refractory High-Entropy Alloys

    Science.gov (United States)

    Gao, M. C.; Carney, C. S.; Doğan, Ö. N.; Jablonksi, P. D.; Hawk, J. A.; Alman, D. E.

    2015-11-01

    This report presents a design methodology for refractory high-entropy alloys with a body-centered cubic (bcc) structure using select empirical parameters (i.e., enthalpy of mixing, atomic size difference, Ω-parameter, and electronegativity difference) and CALPHAD approach. Sixteen alloys in equimolar compositions ranging from quinary to ennead systems were designed with experimental verification studies performed on two alloys using x-ray diffraction, energy-dispersive spectroscopy, and scanning electron microscopy. Two bcc phases were identified in the as-cast HfMoNbTaTiVZr, whereas multiple phases formed in the as-cast HfMoNbTaTiVWZr. Observed elemental segregation in the alloys qualitatively agrees with CALPHAD prediction. Comparisons of the thermodynamic mixing properties for liquid and bcc phases using the Miedema model and CALPHAD are presented. This study demonstrates that CALPHAD is more effective in predicting HEA formation than empirical parameters, and new single bcc HEAs are suggested: HfMoNbTiZr, HfMoTaTiZr, NbTaTiVZr, HfMoNbTaTiZr, HfMoTaTiVZr, and MoNbTaTiVZr.

  19. Ketogenic Diet in Refractory Childhood Epilepsy

    Directory of Open Access Journals (Sweden)

    Amerins Weijenberg MD

    2018-05-01

    Full Text Available Background: Ketogenic diet in children with epilepsy has a considerable impact on daily life and is usually adopted for at least 3 months. Our aim was to evaluate whether the introduction of an all-liquid ketogenic diet in an outpatient setting is feasible, and if an earlier assessment of its efficacy can be achieved. Methods: The authors conducted a prospective, observational study in a consecutive group of children with refractory epilepsy aged 2 to 14 years indicated for ketogenic diet. Ketogenic diet was started as an all-liquid formulation of the classical ketogenic diet, KetoCal 4:1 LQ, taken orally or by tube. After 6 weeks, the liquid diet was converted into solid meals. The primary outcome parameter was time-to-response (>50% seizure reduction. Secondary outcome parameters were time to achieve stable ketosis, the number of children showing a positive response, and the retention rate at 26 weeks. Results: Sixteen children were included. Four of them responded well with respect to seizure frequency, the median time-to-response was 14 days (range 7-28 days. The mean time to achieve stable ketosis was 7 days. The retention rate at 26 weeks was 50%. Of the 8 children who started this protocol orally fed, 6 completed it without requiring a nasogastric tube. Conclusions: Introduction of ketogenic diet with a liquid formulation can be accomplished in orally fed children without major complications. It allowed for fast and stable ketosis.

  20. Ketogenic Diet in Refractory Childhood Epilepsy

    Science.gov (United States)

    Weijenberg, Amerins; van Rijn, Margreet; de Koning, Tom J.; Brouwer, Oebele F.

    2018-01-01

    Background: Ketogenic diet in children with epilepsy has a considerable impact on daily life and is usually adopted for at least 3 months. Our aim was to evaluate whether the introduction of an all-liquid ketogenic diet in an outpatient setting is feasible, and if an earlier assessment of its efficacy can be achieved. Methods: The authors conducted a prospective, observational study in a consecutive group of children with refractory epilepsy aged 2 to 14 years indicated for ketogenic diet. Ketogenic diet was started as an all-liquid formulation of the classical ketogenic diet, KetoCal 4:1 LQ, taken orally or by tube. After 6 weeks, the liquid diet was converted into solid meals. The primary outcome parameter was time-to-response (>50% seizure reduction). Secondary outcome parameters were time to achieve stable ketosis, the number of children showing a positive response, and the retention rate at 26 weeks. Results: Sixteen children were included. Four of them responded well with respect to seizure frequency, the median time-to-response was 14 days (range 7-28 days). The mean time to achieve stable ketosis was 7 days. The retention rate at 26 weeks was 50%. Of the 8 children who started this protocol orally fed, 6 completed it without requiring a nasogastric tube. Conclusions: Introduction of ketogenic diet with a liquid formulation can be accomplished in orally fed children without major complications. It allowed for fast and stable ketosis. PMID:29872664

  1. Management of refractory status epilepticus in adults

    Science.gov (United States)

    Rossetti, Andrea O.; Lowenstein, Daniel H.

    2011-01-01

    Summary Refractory status epilepticus (RSE) can be defined as status epilepticus that continues despite treatment with benzodiazepines and one antiepileptic drug. RSE should be treated promptly to prevent morbidity and mortality; however, scarce evidence is available to support the choice of specific treatments. Major independent outcome predictors are age (not modifiable) and etiology (that should be actively targeted). Recent recommendations for adults, relying upon limited evidence, suggest that RSE treatment aggressiveness should be tailored to the clinical situation: to minimize ICU-related complications, focal RSE without major consciousness impairment might initially be approached more conservatively; conversely, early induction of pharmacological coma is advisable in generalized-convulsive forms. At this stage, midazolam, propofol or barbiturates represent the most used alternatives. Several other treatments, such as additional anesthetics, other antiepileptic or immunomodulatory compounds, or non-pharmacological approaches (electroconvulsive treatment, hypothermia), have been used in protracted RSE. Treatment lasting weeks or months may sometimes result in a good outcome, as in selected cases after cerebral anoxia and encephalitis. Well-designed prospective studies of this condition are urgently needed. PMID:21939901

  2. Optimizing thermal shock resistance of layered refractories

    Energy Technology Data Exchange (ETDEWEB)

    Hein, Jarno; Kuna, Meinhard [Institute of Mechanics and Fluid Dynamics, Technical University Bergakademie Freiberg, Lampadiusstrasse 4, 09599 Freiberg (Germany)

    2012-06-15

    Severe thermal shocks may cause critical thermal stresses and failure in refractories or ceramic materials. To increase the thermal shock resistance, layered material structures are suggested. In order to optimize properties of these alternative structures, thermo-mechanical simulations are required. In this study, a finite difference method (FDM) is used for solving the partial differential equation of heat conduction with spatially varying parameters. The optimization of the strip's thermal shock resistance is exemplarily done on a 10 layered strip subjected to constant temperature jump on the top surface. Each layer can be set with different porous Al{sub 2}O{sub 3} and MgO ceramics, whose material properties are theoretically determined. In this study, an improved optimization method is developed that consists of a combination and sequence of Monte Carlo simulations and evolution strategies to overcome certain disadvantages of both techniques. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  3. Production of lightweight refractory material by hydrothermal process

    International Nuclear Information System (INIS)

    Sulejmani, Ramiz B.

    2002-01-01

    Many different processes of production of lightweight refractories are well known over the World. Traditional production of lightweight refractories is by addition of combustibles or by a special frothing process. This work is concerned with hydrothermal of lightweight refractories from rice husk ash. The rice husk ash, used in present investigations were from Kocani region, R. Macedonia. The chemical analysis of the rice husk ash shows that it contains 91,8 - 93,7% SiO 2 and some alkaline and alkaline earth oxides. Microscopic and X - ray diffraction examinations of the rice husk ash have shown that it is composed of cristobalite, tridimite and amorphous silica. The composition of the mixture for lightweight refractory brick production is 93,4% rice husk ash and 6,6% Ca(OH) 2 . The mixtures were well mixed, moistened and pressed at 5 - 10 MPa. The hydrothermal reactions between calcium hydroxide and rice husk ash over the temperature range 80 - 160 o C were investigated. The period of autoclave treatment was from 2 to 72 h. After the hydrothermal treatment of the samples, the mineralogical composition, bulk density, density, cold crushing strength, porosity, refractoriness and thermal expansion were examined. Analysing the properties of the obtained samples it can be concluded that from rice husk ash and calcium hydroxide under hydrothermal condition it is possible to obtain lightweight acid refractory material with high quality.(Author)

  4. Development of AZS refractories for the glass industry

    International Nuclear Information System (INIS)

    Guzman, A.M.; Rodriguez, P.

    2004-01-01

    Refractory materials can support high temperatures, thermal strength and the contact with aggressive environments, for this reason they are widely used in the cement, glass and steel industry. Commercial AZS (alumina-zirconia-silica) refractories are a good alternative in refractory materials for the glass industry' because they can support the aggressive conditions during liquid processing of glass. However, another problem encountered in glass industry is contamination by refractory' material that fall into the molten glass, which can produce a series of defects in the final product. This research was conducted to develop new formulations of AZS refractories with different amounts of ZrO 2 with the purpose of improving the characteristics, properties and the work conditions in the glass melting furnaces and, at the same time, lower the costs this type of refractories. The results obtained indicate that the composition with low content of ZrO 2 can provide better properties than the commercial product, with some modifications in the particle size distribution. Copyright (2004) AD-TECH - International Foundation for the Advancement of Technology Ltd

  5. Attachment style and adjustment to divorce.

    Science.gov (United States)

    Yárnoz-Yaben, Sagrario

    2010-05-01

    Divorce is becoming increasingly widespread in Europe. In this study, I present an analysis of the role played by attachment style (secure, dismissing, preoccupied and fearful, plus the dimensions of anxiety and avoidance) in the adaptation to divorce. Participants comprised divorced parents (N = 40) from a medium-sized city in the Basque Country. The results reveal a lower proportion of people with secure attachment in the sample group of divorcees. Attachment style and dependence (emotional and instrumental) are closely related. I have also found associations between measures that showed a poor adjustment to divorce and the preoccupied and fearful attachment styles. Adjustment is related to a dismissing attachment style and to the avoidance dimension. Multiple regression analysis confirmed that secure attachment and the avoidance dimension predict adjustment to divorce and positive affectivity while preoccupied attachment and the anxiety dimension predicted negative affectivity. Implications for research and interventions with divorcees are discussed.

  6. Trend of the refractory technology in ICR and UNITECR; Taikabutsu kokusai kaigi oyobi toitsu taikabutsu kokusai kaigi no happyo kara mita taikabutsu gijutsu no doko

    Energy Technology Data Exchange (ETDEWEB)

    Taira, H.

    1996-05-01

    Technological trends have been compiled on the basis of the agendas of all the six events from the 1st International Conference on Refractories through the UNITECR `95 held in Japan. Although the number of articles presented increased from 52 to 187 during this period, yet there was a remarkable decrease in the number of articles in some fields related to refractories for iron and steel making, the said field involving pig iron melting preparatory treatment and torpedo cars. There is no great change in the number of articles about the MgO-C brick in use for building converters and electric furnaces that are typical kilns, with various countries presenting papers indicating that the brick is the representative of high-performance refractories being used across the world. There is a steady increase in the number of articles related to nonferrous metals, glass, and cement, and attracting attention is the papers concerning incinerators. The number of papers about basic technologies and new testing methods is constant. Attracting attention are papers for example on fine ceramics with its scope of application as refractories spreading, which reflects the technological trends across the world and the circumstances the host countries find themselves under. It is added here that Brazil rich in refractory resources presented many papers at the conference that it hosted. 27 refs., 7 tabs.

  7. The method of attachment influences accelerometer-based activity data in dogs.

    Science.gov (United States)

    Martin, Kyle W; Olsen, Anastasia M; Duncan, Colleen G; Duerr, Felix M

    2017-02-10

    Accelerometer-based activity monitoring is a promising new tool in veterinary medicine used to objectively assess activity levels in dogs. To date, it is unknown how device orientation, attachment method, and attachment of a leash to the collar holding an accelerometer affect canine activity data. It was our goal to evaluate whether attachment methods of accelerometers affect activity counts. Eight healthy, client-owned dogs were fitted with two identical neck collars to which two identical activity monitors were attached using six different methods of attachment. These methods of attachment evaluated the use of a protective case, positioning of the activity monitor and the tightness of attachment of the accelerometer. Lastly, the effect of leash attachment to the collar was evaluated. For trials where the effect of leash attachment to the collar was not being studied, the leash was attached to a harness. Activity data obtained from separate monitors within a given experiment were compared using Pearson correlation coefficients and across all experiments using the Kruskal-Wallis Test. There was excellent correlation and low variability between activity monitors on separate collars when the leash was attached to a harness, regardless of their relative positions. There was good correlation when activity monitors were placed on the same collar regardless of orientation. There were poor correlations between activity monitors in three experiments: when the leash was fastened to the collar that held an activity monitor, when one activity monitor was housed in the protective casing, and when one activity monitor was loosely zip-tied to the collar rather than threaded on using the provided metal loop. Follow-up, pair-wise comparisons identified the correlation associated with these three methods of attachment to be statistically different from the level of correlation when monitors were placed on separate collars. While accelerometer-based activity monitors are useful

  8. Managing refractory Crohn's disease: challenges and solutions

    Directory of Open Access Journals (Sweden)

    Tanida S

    2015-04-01

    Full Text Available Satoshi Tanida, Keiji Ozeki, Tsutomu Mizoshita, Hironobu Tsukamoto, Takahito Katano, Hiromi Kataoka, Takeshi Kamiya, Takashi Joh Department of Gastroenterology and Metabolism, Nagoya City University Graduate School of Medical Sciences, Aichi Prefecture, Japan Abstract: The goals of treatment for active Crohn's disease (CD are to achieve clinical remission and improve quality of life. Conventional therapeutics for moderate-to-severe CD include 5-aminosalicylic acid, corticosteroids, purine analogs, azathioprine, and 6-mercaptopurine. Patients who fail to respond to conventional therapy are treated with tumor necrosis factor (TNF-α inhibitors such as infliximab and adalimumab, but their efficacy is limited due to primary nonresponse or loss of response. It is suggested that this requires switch to another TNF-α inhibitor, a combination therapy with TNF-α blockade plus azathioprine, or granulocyte and monocyte adsorptive apheresis, and that other therapeutic options having different mechanisms of action, such as blockade of inflammatory cytokines or adhesion molecules, are needed. Natalizumab and vedolizumab are neutralizing antibodies directed against integrin a4 and a4ß7, respectively. Ustekinumab is a neutralizing antibody directed against the receptors for interleukin-12 and interleukin-23. Here, we provide an overview of therapeutic treatments that are effective and currently available for CD patients, as well as some that likely will be available in the near future. We also discuss the advantages of managing patients with refractory CD using a combination of TNF-α inhibitors plus azathioprine or intensive monocyte adsorptive apheresis. Keywords: adalimumab, granulocyte and monocyte adsorptive apheresis, combination therapy, complete remission

  9. Intrathecal chemotherapy for refractory disseminated medulloblastoma.

    Science.gov (United States)

    Yoshimura, Junichi; Nishiyama, Kenichi; Mori, Hiroshi; Takahashi, Hideaki; Fujii, Yukihiko

    2008-05-01

    To analyze the effect of intrathecal (IT) chemotherapy for disseminated medulloblastoma. Twenty-one patients received IT chemotherapy using the chemotherapeutic agents of methotrexate (MTX) and nitrosoureas (ACNU, MCNU) including nine patients for residual leptomeningeal lesions after initial surgery and radiation, and 12 for a recurrence with leptomeningeal dissemination. Of these 21 patients, 12 received a lumbar and/or ventricular bolus injection of the chemotherapeutic agents, one received the ventriculolumbar perfusion of the agents, and eight received both the perfusion and bolus injection. The doses ranged from 6-7 mg/m(2) of ACNU for perfusion and 3-3.5 mg/m(2) of ACNU, MCNU, or MTX for the bolus injection, and the cycles were administered from 3 to 12 times for perfusion and from 5 to 54 times for the bolus injection. The effects of chemotherapy were assessed by both radiological and cytological examinations, and the clinical symptoms were also assessed. Radiological and/or cytological responses were observed in 10 of 21 patients (47.6%), including seven cases demonstrating a complete remission. The 5-year overall survival rate and 5-year survival rate after dissemination were 61.5 and 46.4%, respectively. Five patients who received a lumbar bolus injection of nitrosoureas experienced paraplegia and double incontinence. One patient who received a ventricular injection of nitrosoureas experienced truncal ataxia. IT chemotherapy was found to be effective in some cases with refractory disseminated medulloblastoma and it seems to be an appropriate treatment choice for leptomeningeal recurrence. However, the frequent bolus injections of nitrosoureas should be avoided to prevent the side effects.

  10. Networked Attached Devices at SNS

    CERN Document Server

    Blokland, W

    2003-01-01

    The Spallation Neutron Source (SNS) diagnostic instruments at Oak Ridge National Laboratory are based on the Network Attached Device (NAD) concept. Each pickup or sensor has its own resources such as timing, data acquisition and processing. NADs are individually connected to the network, thus reducing the brittleness inherent in tightly coupled systems. This architecture allows an individual device to fail or to be serviced or removed without disrupting other devices. This paper describes our implementation of the nearly 400 NADs to be deployed. The hardware consists of rack-mounted PCs with standard motherboards and PCI data-acquisition boards. The software environment is based on LabVIEW and EPICS. LabVIEW supports the agile development demanded by modern diagnostic systems. EPICS is the control system standard for the entire SNS facility. To achieve high performance, LabVIEW and EPICS communicate through shared memory. SNS diagnostics are developed by a multi-laboratory partnership including ORNL, BNL, LAN...

  11. Multipurpose hooks for elastic attachment

    Directory of Open Access Journals (Sweden)

    Siddharth Shashidhar Revankar

    2014-01-01

    Full Text Available As certain bracket systems do not include hooks on premolar brackets for elastic attachment, Kobayashi or custom made ligature hooks have proven as an alternative. However, these hooks tend to bend labially when used with heavy elastics and these elastics can even pop loose from the hooks on mouth opening. The following article describes an innovative multipurpose hook which is simple, stiff and inexpensive and can be used for engagement of class II elastics on premolars in case of missing molars as well as engagement of intermaxillary elastics for settling of occlusion in finishing stages. As the hooks can be prefabricated, this saves a lot of chair side time and is more practical for use in day-to-day orthodontic practice.

  12. Catalytic ozonation not relying on hydroxyl radical oxidation: A selective and competitive reaction process related to metal-carboxylate complexes

    KAUST Repository

    Zhang, Tao; Croue, Jean-Philippe

    2014-01-01

    Catalytic ozonation following non-hydroxyl radical pathway is an important technique not only to degrade refractory carboxylic-containing organic compounds/matter but also to avoid catalyst deactivation caused by metal-carboxylate complexation

  13. Association Between Insecure Attachment and ADHD

    DEFF Research Database (Denmark)

    Storebø, Ole Jakob; Rasmussen, Pernille Darling; Simonsen, Erik

    2016-01-01

    OBJECTIVE: Psychological theories have postulated an association between insecure attachment and ADHD. The objective of this study is to investigate possible association between insecure attachment and ADHD in children and adults. METHOD: Review of literature was performed using the Psyc......INFO, Medline, and EMBASE databases. RESULTS: Twenty-nine studies were included in the review. Overall, the studies showed that parental attachment problems and environmental mediating factors were significantly associated with childhood ADHD. Adults with ADHD had a much higher incidence of insecure attachment...... styles than reported in the general population. CONCLUSION: There seems to be a clear association between ADHD and insecure attachment. It is likely that early intervention in the form of parent training and pharmacological treatment may prevent development of attachment problems. But such studies have...

  14. Attachment theory: A review of research

    Directory of Open Access Journals (Sweden)

    Polovina Nada

    2005-01-01

    Full Text Available Research of attachment is numerous and versatile. They differ according to problems addressed, methodology applied (longitudinal studies, studies with horizontal designs, different instruments used, different methods of data analysis, and characteristics of samples involved (concerning age socio/economic status, family ecology. The research is commonly relied on the core assumptions of the theory itself, and the shared characteristic is orientation to explore complex phenomena of human experience and functioning. From the vast variety of research only those who most directly test the basic assumptions of the attachment theory are focused and addressed in the paper: representation of patterns of attachment in the childhood and adulthood, stability and change of attachment security from infancy to early adulthood, transgenerational transmission of attachment characteristics, the place and the role of attachment behavioral system in the personality development. The aim of the paper is to highlight the basic research and theory issues and directions, and illustrate them with concrete research date.

  15. Place attachment and disasters: Knowns and unknowns.

    Science.gov (United States)

    Jamali, Mehdi; Nejat, Ali

    When considering the factors important for disaster recovery, one must consider the attachment individuals have toward their living area. This article reviews and synthesizes the current literature on the determinants of place attachment in the context of postdisaster recovery. Although the majority of the reviewed articles focused on disaster recovery, there were some which had a broader scope and were included due to their importance. This research categorizes the determinants of place attachment into four categories: demographic, socioeconomic, spatial, and psychosocial. Age, ethnicity, and religion were grouped under the category of demographics. Job status, education, and property ownership were categorized under the socioeconomic category. Attachment to home, neighborhood, and city, together with attachment to rural and urban areas, were grouped under the spatial category. Finally, mental health status and community attachment were classified under the psychosocial heading. Based on the outcome of the aforementioned synthesis, this article develops a conceptual framework to guide future research.

  16. Place attachment and natural environmental risk

    DEFF Research Database (Denmark)

    Bonaiuto, Marino; Alves, Susana; De Dominicis, Stefano

    2016-01-01

    Little is known about place attachment affecting natural environmental risk perception and coping. A systematic search of social science databases revealed 31 works (1996–2016) directly addressing place attachment in relation to different types of natural hazard risks (e.g., seismic, volcanic, etc.......). Across different contexts, the research shows: (a) positive and/or negative relationships between place attachment and natural environmental risk perception; (b) positive and/or negative relationships between place attachment and risk coping; and (c) mediating and moderating relationships. In particular......, results show that: (a) highly attached individuals perceive natural environmental risks but underestimate their potential effects; (b) highly attached individuals are unwilling to relocate when facing natural environmental risks and more likely to return to risky areas after a natural environmental...

  17. Surgical disconnection of patent paraumbilical vein in refractory hepatic encephalopathy.

    Science.gov (United States)

    Ishikawa, Yoshinori; Yoshida, Hiroshi; Mamada, Yasuhiro; Taniai, Nobuhiko; Bando, Koichi; Mizuguchi, Yoshiaki; Kakinuma, Daisuke; Kanda, Tomohiro; Akimaru, Koho; Tajiri, Takashi

    2008-06-01

    Refractory hepatic encephalopathy (HE) frequently develops in patients with cirrhosis and portal-systemic shunt. Recently, patients with refractory HE associated with portal-systemic shunt have been treated with interventional radiology. We describe a promising new treatment for portal-systemic shunt, ligation of the patent paraumbilical vein (PUV) after partial splenic embolization, in patients with refractory HE. Four patients with cirrhosis (3 women and 1 man; mean age, 56 years) and refractory HE due to a patent PUV were studied. Patency of the PUV had recurred in 1 patient after primary occlusion by interventional radiological procedures. The Child-Pugh class was B in 2 patients and C in 2. Before the present treatment, all patients had been hospitalized at least 3 times because of recurrent HE. Partial splenic embolization was performed in all patients to decrease portal venous pressure before surgery. Surgical ligation of the patent PUV was performed under epidural anesthesia. The patent PUV was carefully skeletonized and doubly ligated. Esophageal varices were evaluated with upper gastrointestinal endoscopy before and after surgery. The mean follow-up duration was 15.8 months. After ligation, there were no clinically significant complications. Esophageal varices were unchanged. The serum ammonia level was higher before surgery (162.3 +/- 56.4 mug/dL, mean +/- SD) than after surgery (41.8 +/- 20.2 mug/dL; p=0.0299). No patient had symptoms of HE. Ligation of the patent PUV is an effective treatment for patients with refractory HE.

  18. Treatment of Refractory Idiopathic Supraorbital Neuralgia Using Percutaneous Pulsed Radiofrequency.

    Science.gov (United States)

    Luo, Fang; Lu, Jingjing; Ji, Nan

    2018-02-26

    No ideal therapeutic method currently exists for refractory idiopathic supraorbital neuralgia patients who do not respond to conservative therapy, including medications and nerve blocks. Pulsed radiofrequency is a neuromodulation technique that does not produce sequelae of nerve damage after treatment. However, the efficacy of percutaneous pulsed radiofrequency for the treatment of refractory idiopathic supraorbital neuralgia is still not clear. The purpose of our study was to evaluate the efficacy and safety of pulsed radiofrequency treatment of the supraorbital nerve for refractory supraorbital neuralgia patients. We prospectively investigated the long-term effects of ultrasound-guided percutaneous pulsed radiofrequency in the treatment of 22 refractory idiopathic supraorbital neuralgia patients. A reduction in the verbal pain numeric rating scale score of more than 50% was used as the standard of effectiveness. The effectiveness rates at different time points within 2 years were calculated. After a single pulsed radiofrequency treatment, the effectiveness rate at 1 and 3 months was 77%, and the rates at 6 months, 1 year, and 2 years were 73%, 64%, and 50%, respectively. Except for a small portion of patients (23%) who experienced mild upper eyelid ecchymosis that gradually disappeared after approximately 2 weeks, no obvious complications were observed. In conclusion, the results of our study demonstrate that for patients with refractory idiopathic supraorbital neuralgia, percutaneous pulsed radiofrequency may be an effective and safe treatment choice. © 2018 World Institute of Pain.

  19. Resistant and Refractory Hypertension: Antihypertensive Treatment Resistance vs Treatment Failure

    Science.gov (United States)

    Siddiqui, Mohammed; Dudenbostel, Tanja; Calhoun, David A.

    2017-01-01

    Resistant or difficult to treat hypertension is defined as high blood pressure that remains uncontrolled with 3 or more different antihypertensive medications, including a diuretic. Recent definitions also include controlled blood pressure with use of 4 or more medications as also being resistant to treatment. Recently, refractory hypertension, an extreme phenotype of antihypertensive treatment failure has been defined as hypertension uncontrolled with use of 5 or more antihypertensive agents, including a long-acting thiazide diuretic and a mineralocorticoid receptor antagonist. Patients with resistant vs refractory hypertension share similar characteristics and comorbidities, including obesity, African American race, female sex, diabetes, coronary heart disease, chronic kidney disease, and obstructive sleep apnea. Patients with refractory vs resistant hypertension tend to be younger and are more likely to have been diagnosed with congestive heart failure. Refractory hypertension might also differ from resistant hypertension in terms of underlying cause. Preliminary evidence suggests that refractory hypertension is more likely to be neurogenic in etiology (ie, heightened sympathetic tone), vs a volume-dependent hypertension that is more characteristic of resistant hypertension in general. PMID:26514749

  20. Development of alumino-silicate refractories in Ghana

    International Nuclear Information System (INIS)

    Kisiedu, A. K.; Tetteh, D.M.B.; Obiri, H. A.; Brenya, E. F.; Ayensu, A.

    2008-01-01

    Alumino-silicate (bauxite), andalusite, kaolin and clay were investigated for suitability in production of alumina, mullite and fireclay brick refractories. The raw materials were characterized by X-ray diffraction, differential thermal and silicate analyses. The x-ray diffraction analysis of alumina and mullite refractories fired at 1450 0 C, and fireclay bricks fired at 1350 0 C, indicated presence of corundum and alpha-alumina crystals. The values of thermal (fired) shrinkage, crushing, strength, porosity, water absorption and bulk density determined were 31.1%, 2.3 x 10 3 kg/m 3 , 4.86 x 10 6 N/m 2 and 13.2 % for mullite; 30.2%, 2.4 x 10 3 kg/m 3 , 3.20 x 10 6 N/m 2 and W = 12.8 % for alumina; and 25.2 %, 2.1 x 10 3 kg/m 3 , 2.61 x 10 6 N/m 2 and W = 11.8% for fireclay, respectively. Bauxite, andalusite and special kaolin were identified as potential raw materials for developing alumina and mullite refractories for construction of high temperature kilns and furnaces operating at 1350 0 C. The clay and kaolin minerals could be used to produce fireclay refractories for construction of incinerators operating at maximum temperatures of about 1000 0 C. The performance of the refractories was demonstrated by producing bricks to construct kilns and incinerators for the ceramic industry and hospitals. (au)

  1. Attachment style and interpersonal trauma in refugees.

    Science.gov (United States)

    Morina, Naser; Schnyder, Ulrich; Schick, Matthis; Nickerson, Angela; Bryant, Richard A

    2016-12-01

    Refugees can suffer many experiences that threaten their trust in others. Although models of refugee mental health have postulated that attachment securities may be damaged by refugee experiences, this has yet to be empirically tested. This study aimed to understand the relationship between the nature of traumatic experiences sustained by refugees and attachment styles. In a cross-sectional study, treatment-seeking refugees (N = 134) were assessed for traumatic exposure using the Harvard Trauma Questionnaire and Posttraumatic Diagnostic Scale. Attachment style was assessed using the Experiences in Close Relationship Scale. Whereas gender and severity of interpersonal traumatic events predicted avoidant attachment style (accounting for 11% of the variance), neither these factors nor non-interpersonal trauma predicted anxious attachment. Exposure to interpersonal traumatic events, including torture, is associated with enduring avoidant attachment tendencies in refugees. This finding accords with attachment theories that prior adverse interpersonal experiences can undermine secure attachment systems, and may promote avoidance of attachment seeking. This finding may point to an important process maintaining poor psychological health in refugees affected by interpersonal trauma. © The Royal Australian and New Zealand College of Psychiatrists 2016.

  2. Temperament and attachment: one construct or two?

    Science.gov (United States)

    Mangelsdorf, S C; Frosch, C A

    1999-01-01

    In this chapter we described the constructs of temperament and attachment and have discussed similarities and differences between the two. We addressed the issue of whether temperament contributes to overall attachment security or to the specific type of attachment that children display. We conclude that although temperament may influence the type of secure and insecure attachment relationship children form with their parent, temperament alone will not determine if a child is classified as securely or insecurely attached. We presented evidence suggesting that certain dimensions of temperament, specifically negative emotionality, may be associated with infants' behavior during the Strange Situation, such as proneness-to-distress during separations. However, we noted that these temperament dimensions do not predict overall security of attachment. It is likely that although no single temperament characteristic, such as proneness-to-distress, in and of itself determines overall attachment security, it is possible that a constellation of temperament characteristics may be more strongly related to attachment security. The examination of constellations of temperament characteristics may be particularly useful for furthering our understanding of individual differences within attachment classifications. Such an approach may elucidate the reasons why infants are classified into one subgroup of secure, insecure-avoidant, or insecure-resistant attachment versus another subgroup. Furthermore, we suggest that the collection of findings regarding temperament and attachment not only underscores the importance of a transactional approach to early social-emotional development, but emphasizes that temperament and attachment can make unique and interactive contributions to children's social-emotional functioning. That is, the goodness-of-fit between infant and parent characteristics may best predict security of attachment. Although child characteristics clearly contribute to the

  3. Security for Network Attached Storage Devices

    National Research Council Canada - National Science Library

    Gobioff, Howard

    1997-01-01

    This paper presents a novel cryptographic capability system addressing the security and performance needs of network attached storage systems in which file management functions occur at a different...

  4. Sine-Bar Attachment For Machine Tools

    Science.gov (United States)

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  5. Overdenture locator attachments for atrophic mandible

    Directory of Open Access Journals (Sweden)

    Neerja Mahajan

    2013-01-01

    Full Text Available Implant-supported overdentures provide a good opportunity for dentists to improve oral health and quality-of-life of patients. Atrophic mandible poses a significant challenge to successful oral rehabilitation with dental implants. In this article, the fabrication of lower overdenture by two narrow platform implants is described with dual retentive, resilient, self-locating locator attachment system. The locator attachment system has the lowest profile in comparison with the ball and bar attachments and is versatile up to 40΀ of divergence between two implants. By using locators as attachments, we can meet functional, economic and social expectation of patients with ease and satisfaction.

  6. REFRACTORY CEPHALEA AND RHINITIS FOLLOWING DENTAL IMPLANT

    Directory of Open Access Journals (Sweden)

    ENRIQUE COSCARÓN-BLANCO

    2018-05-01

    Full Text Available INTRODUCTION: Dental implants are prosthetic devices that are inserted into the thickness of the bone of the maxilla for osseointegration using a screw system. They are increasingly used for both functional and aesthetic reasons. As in any medical or surgical procedure, there are some typical risks and possible sequelae that must be explained and prevented. However, sometimes not-associated-with-implantation rare complications that can cause great morbidity and decrease in the quality of life of the implant recipient can occur. A case of an unusual complication is reported,MATERIAL AND METHODS: A 65-year-old woman presented with a permanent mainly right-sided bilateral nasal obstruction with frequent watery rhinorrhea and headache with retro-orbital and infraorbital irradiation refractory to broad-spectrum antibiotic treatment, corticosteroids and analgesics that she associated with a dental implant two weeks before. . Sinusitis or implant-related complication were ruled out by the dentist and her Primary Care Physician, and therefore she was referred to otorhinolaryngological assessment after radiological study with maxillary sinuses free of disease. The physical examination demostrated inferior obstructive hypertrophic turbinates from the anterior third and thick clear rhinorrhea. After topic tetracaine with adrenaline ,retraction of the turbinates revealed a screw that after breaking the floor of the right nostril entered the thickness of the inferior turbinate. In the left nostril, soil procidence is identified with turbinal contact. An orthopantomography demonstrated the findings described above, highlighting also how the implant was inserted into the skeleton of the inferior turbinate. The sympthoms resolved after removal of the implant. Topical oxymetazoline and corticosteroids provided little relief meanwhile. DISCUSSION AND CONCLUSIONS: The functional objectives sought with dental implants can be compromised by complications such as the

  7. Prevalence and Clinical Characteristics of Refractory Hypertension.

    Science.gov (United States)

    Armario, Pedro; Calhoun, David A; Oliveras, Anna; Blanch, Pedro; Vinyoles, Ernest; Banegas, Jose R; Gorostidi, Manuel; Segura, Julián; Ruilope, Luis M; Dudenbostel, Tanja; de la Sierra, Alejandro

    2017-12-07

    We aimed to estimate the prevalence of refractory hypertension (RfH) and to determine the clinical differences between these patients and resistant hypertensives (RH). Secondly, we assessed the prevalence of white-coat RfH and clinical differences between true- and white-coat RfH patients. The present analysis was conducted on the Spanish Ambulatory Blood Pressure Monitoring Registry database containing 70 997 treated hypertensive patients. RH and RfH were defined by the presence of elevated office blood pressure (≥140 and/or 90 mm Hg) in patients treated with at least 3 (RH) and 5 (RfH) antihypertensive drugs. White-coat RfH was defined by RfH with normal (<130/80 mm Hg) 24-hour blood pressure. A total of 11.972 (16.9%) patients fulfilled the standard criteria of RH, and 955 (1.4%) were considered as having RfH. Compared with RH patients, those with RfH were younger, more frequently male, and after adjusting for age and sex, had increased prevalence of target organ damage, and previous cardiovascular disease. The prevalence of white coat RfH was lower than white-coat RH (26.7% versus 37.1%, P <0.001). White-coat RfH, in comparison with those with true RfH, showed a lower prevalence of both left ventricular hypertrophy (22% versus 29.7%; P =0.018) and microalbuminuria (28.3% versus 42.9%; P =0.047). The prevalence of RfH was low and these patients had a greater cardiovascular risk profile compared with RH. One out of 4 patients with RfH have normal 24-hour blood pressure and less target organ damage, thus indicating the important role of ambulatory blood pressure monitoring in guiding antihypertensive therapy in difficult-to-treat patients. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  8. Ahmed glaucoma valve implantation for refractory glaucoma after sequential failed trabeculectomy

    Directory of Open Access Journals (Sweden)

    Zhi-Qin Wu

    2016-07-01

    Full Text Available AIM: To evaluate the safety and efficacy of Ahmed glaucoma valve implantation for refractory glaucoma after sequential failed trabeculectomy. METHODS: Thirty-six patients(36 eyeswith prior failed sequential trabeculectomy who underwent Ahmed glaucoma valve implantation were included. The intraocular pressure(IOP, best corrected visual acuity(BCVAand complications were ovserved and all the patients were followed up at least for 12mo. RESULTS: Mean preoperative IOP was 35.20±7.28mmHg and reduced to 10.15±3.34, 11.23±3.56, 15.63±5.72, 17.17±5.47, 17.73±6.23,19.76±5.43mmHg at 1, 2wk, 1, 3, 6 and 12mo after surgery, which was significant different from the preoperative level(t=12.643, 11.837, 10.324, 8.839, 8.462, 8.046, all PZ=-0.420, P>0.05. At 12mo after operation, the complete success rate reached 78% and the conditional success rate reached 92%. There were 5 eyes complicated with shallow anterior chamber, 3 eye complicated with anterior chamber hemorrhage, which all recovered after additional treatments. Late complications included valve exposure and encapsulated cystic blebs around the plate. Severe corneal endothelium loss occurred in 1 patient. CONCLUSION: Ahmed glaucoma valve implantation is effective in reducing IOP at 1-year follow-up in refractory glaucoma patients with prior sequential failed trabeculectomy, but we should fully understand and attach great importance to all kinds of complications that may occur.

  9. Palbociclib in Treating Patients With Relapsed or Refractory Rb Positive Advanced Solid Tumors, Non-Hodgkin Lymphoma, or Histiocytic Disorders With Activating Alterations in Cell Cycle Genes (A Pediatric MATCH Treatment Trial)

    Science.gov (United States)

    2018-05-15

    Advanced Malignant Solid Neoplasm; RB1 Positive; Recurrent Childhood Ependymoma; Recurrent Ewing Sarcoma; Recurrent Glioma; Recurrent Hepatoblastoma; Recurrent Kidney Wilms Tumor; Recurrent Langerhans Cell Histiocytosis; Recurrent Malignant Germ Cell Tumor; Recurrent Malignant Glioma; Recurrent Medulloblastoma; Recurrent Neuroblastoma; Recurrent Non-Hodgkin Lymphoma; Recurrent Osteosarcoma; Recurrent Peripheral Primitive Neuroectodermal Tumor; Recurrent Rhabdoid Tumor; Recurrent Rhabdomyosarcoma; Recurrent Soft Tissue Sarcoma; Refractory Ependymoma; Refractory Ewing Sarcoma; Refractory Glioma; Refractory Hepatoblastoma; Refractory Langerhans Cell Histiocytosis; Refractory Malignant Germ Cell Tumor; Refractory Malignant Glioma; Refractory Medulloblastoma; Refractory Neuroblastoma; Refractory Non-Hodgkin Lymphoma; Refractory Osteosarcoma; Refractory Peripheral Primitive Neuroectodermal Tumor; Refractory Rhabdoid Tumor; Refractory Rhabdomyosarcoma; Refractory Soft Tissue Sarcoma

  10. Using arc voltage to locate the anode attachment in plasma arc cutting

    International Nuclear Information System (INIS)

    Osterhouse, D J; Heberlein, J V R; Lindsay, J W

    2013-01-01

    Plasma arc cutting is a widely used industrial process in which an electric arc in the form of a high velocity plasma jet is used to melt and blow away metal. The arc attaches inside the resulting cut slot, or kerf, where it both provides a large heat flux and determines the flow dynamics of the plasma. Knowledge of the position of the arc attachment is essential for understanding the phenomena present at the work piece. This work presents a new method of measuring the location of the arc attachment in which the arc voltage is measured during the cutting of a range of work piece thicknesses. The attachment location is then interpreted from the voltages. To support the validity of this method, the kerf shape, dross particle size and dross adhesion to the work piece are also observed. While these do not conclusively give an attachment location, they show patterns which are consistent with the attachment location found from the voltage measurements. The method is demonstrated on the cutting of mild steel, where the arc attachment is found to be stationary in the upper portion of the cut slot and in reasonable agreement with existing published findings. For a process optimized for the cutting of 12.7 mm mild steel, the attachment is found at a depth of 1.5–3.4 mm. For a slower process optimized for the cutting of 25.4 mm mild steel, the attachment is found at a depth of 3.4–4.8 mm, which enhances heat transfer further down in the kerf, allowing cutting of the thicker work piece. The use of arc voltage to locate the position of the arc attachment is unique when compared with existing methods because it is entirely independent of the heat distribution and visualization techniques. (paper)

  11. Neuroimaging in refractory epilepsy. Current practice and evolving trends

    International Nuclear Information System (INIS)

    Ramli, N.; Rahmat, K.; Lim, K.S.; Tan, C.T.

    2015-01-01

    Highlights: • Neuroimaging is imperative in diagnostic work up and therapeutic assessment of refractory epilepsy. • Identification of epileptogenic zone on EEG, MRI and functional imaging improves the success of surgery. • High performance MRI greatly enhanced metabolic information and elucidate brain functions. • Optimisation of epilepsy protocols in structural and functional MRI are presented in this article. - Abstract: Identification of the epileptogenic zone is of paramount importance in refractory epilepsy as the success of surgical treatment depends on complete resection of the epileptogenic zone. Imaging plays an important role in the locating and defining anatomic epileptogenic abnormalities in patients with medically refractory epilepsy. The aim of this article is to present an overview of the current MRI sequences used in epilepsy imaging with special emphasis of lesion seen in our practices. Optimisation of epilepsy imaging protocols are addressed and current trends in functional MRI sequences including MR spectroscopy, diffusion tensor imaging and fusion MR with PET and SPECT are discussed

  12. Neuroimaging in refractory epilepsy. Current practice and evolving trends

    Energy Technology Data Exchange (ETDEWEB)

    Ramli, N. [Department of Biomedical Imaging, University Malaya Research Imaging Centre (Malaysia); Rahmat, K., E-mail: katt_xr2000@yahoo.com [Department of Biomedical Imaging, University Malaya Research Imaging Centre (Malaysia); Lim, K.S.; Tan, C.T. [Neurology Unit, Department of Medicine, University Malaya, Kuala Lumpur (Malaysia)

    2015-09-15

    Highlights: • Neuroimaging is imperative in diagnostic work up and therapeutic assessment of refractory epilepsy. • Identification of epileptogenic zone on EEG, MRI and functional imaging improves the success of surgery. • High performance MRI greatly enhanced metabolic information and elucidate brain functions. • Optimisation of epilepsy protocols in structural and functional MRI are presented in this article. - Abstract: Identification of the epileptogenic zone is of paramount importance in refractory epilepsy as the success of surgical treatment depends on complete resection of the epileptogenic zone. Imaging plays an important role in the locating and defining anatomic epileptogenic abnormalities in patients with medically refractory epilepsy. The aim of this article is to present an overview of the current MRI sequences used in epilepsy imaging with special emphasis of lesion seen in our practices. Optimisation of epilepsy imaging protocols are addressed and current trends in functional MRI sequences including MR spectroscopy, diffusion tensor imaging and fusion MR with PET and SPECT are discussed.

  13. Beta-blockers in cirrhosis and refractory ascites

    DEFF Research Database (Denmark)

    Kimer, Nina; Feineis, Martin; Møller, Søren

    2015-01-01

    OBJECTIVE: It is currently discussed if beta-blockers exert harmful effects and increase mortality in patients with cirrhosis and refractory ascites. In this study, we provide an overview of the available literature in this field in combination with a retrospective analysis of 61 patients...... trials (9 trials on propranolol, 1 case-control study and 4 retrospective analyses) were identified. One trial suggested an increased mortality in patients treated with beta-blockers and refractory ascites. The results of the remaining trials were inconclusive. No increase in mortality among beta-blocker......-treated patients was found in the present retrospective analysis. CONCLUSIONS: Treatment with beta-blockers may increase mortality in patients with cirrhosis and refractory ascites. However, the current evidence is sparse and high-quality studies are warranted to clarify the matter....

  14. Depression in patients with refractory temporal lobe epilepsy

    Directory of Open Access Journals (Sweden)

    Eleonora Borges Gonçalves

    2011-10-01

    Full Text Available OBJECTIVE: To evaluate the comorbidity of depressive disorders in patients with refractory temporal lobe epilepsy (TLE. METHOD: We evaluated 25 consecutive patients with refractory TLE (16 women and 9 men, using semi-structured psychiatric interviews, according to the International Classification of Diseases (ICD-10, and the Beck Depression Inventory. RESULTS: Seventeen of 25 patients (68% had depressive disorder: 6 with dysthymia, three with major depressive episodes and 8 with recurrent depressive disorders. Two (8% were diagnosed with mixed anxiety and depression. Only 5 of 17 patients (29.4% were previously diagnosed with depressive disorder and received prior antidepressant treatment. Duration of epilepsy was significantly higher in patients with depressive disorder (p=0.016, but there was no relationship between depression and seizure frequency. CONCLUSION: This study confirmed that depressive disorders are common and underdiagnosed in patients with TLE refractory to AEDs. Patients with longer duration of epilepsy are at higher risk of having depression.

  15. Felbamate in an adult population with severe refractory epilepsy.

    LENUS (Irish Health Repository)

    Kearney, H

    2011-04-05

    Felbamate (FBM) is efficacious in treating patients with refractory epilepsy but was withdrawn due to cases of aplastic anaemia, hepatic failure and five reported deaths. FBM is currently used in specialist centres and is only being used in one Irish centre to date. This papers aim is to review the efficacy and safety experience of FBM in Irish adult patients with refractory epilepsy. A retrospective chart review was done on patients\\' medical records. Patients were subdivided into responders and non responders based on change in seizure frequency and side effects were recorded for all. Of the 13 patients on FBM nine patients responded to FBM, four patients did not. FBM is a safe and efficacious alternative in an Irish adult population with refractory epilepsy. However close monitoring is still required given the potential fatal side effects that are possible with this anticonvulsant.

  16. Measuring Patients’ Attachment Avoidance in Psychotherapy: Development of the Attachment Avoidance in Therapy Scale (AATS

    Directory of Open Access Journals (Sweden)

    András Láng

    2012-11-01

    Full Text Available A new scale measuring patient-therapist attachment avoidance was developed. Attachment Avoidance in Therapy Scale is a new measure based on the Bartholomew model of adult attachment (Bartholomew & Horowitz, 1991 and the Experience in Close Relationships Scale (Brennan, Clark, & Shaver, 1998 to measure patients’ attachment avoidance towards therapists. With 112 patient-therapist dyads participating in the study, validation of a preliminary scale – measuring both attachment anxiety and attachment avoidance in therapy – took place using therapists’ evaluations of patients’ relational behavior and patients’ self-reports about their attitude toward psychotherapy. Analysis of the data revealed six underlying scales. Results showed all six scales to be reliable. Validation of scales measuring attachment anxiety failed. The importance of Attachment Avoidance in Therapy Scale and its subscales is discussed.

  17. High Throughput Drug Sensitivity Assay and Genomics- Guided Treatment of Patients With Relapsed or Refractory Acute Leukemia

    Science.gov (United States)

    2018-02-28

    Acute Leukemia of Ambiguous Lineage; Recurrent Adult Acute Lymphoblastic Leukemia; Recurrent Adult Acute Myeloid Leukemia; Recurrent Childhood Acute Lymphoblastic Leukemia; Recurrent Childhood Acute Myeloid Leukemia; Refractory Acute Myeloid Leukemia; Refractory Adult Acute Lymphoblastic Leukemia; Refractory Childhood Acute Lymphoblastic Leukemia

  18. Hamiltonian dynamics of preferential attachment

    International Nuclear Information System (INIS)

    Zuev, Konstantin; Papadopoulos, Fragkiskos; Krioukov, Dmitri

    2016-01-01

    Prediction and control of network dynamics are grand-challenge problems in network science. The lack of understanding of fundamental laws driving the dynamics of networks is among the reasons why many practical problems of great significance remain unsolved for decades. Here we study the dynamics of networks evolving according to preferential attachment (PA), known to approximate well the large-scale growth dynamics of a variety of real networks. We show that this dynamics is Hamiltonian, thus casting the study of complex networks dynamics to the powerful canonical formalism, in which the time evolution of a dynamical system is described by Hamilton’s equations. We derive the explicit form of the Hamiltonian that governs network growth in PA. This Hamiltonian turns out to be nearly identical to graph energy in the configuration model, which shows that the ensemble of random graphs generated by PA is nearly identical to the ensemble of random graphs with scale-free degree distributions. In other words, PA generates nothing but random graphs with power-law degree distribution. The extension of the developed canonical formalism for network analysis to richer geometric network models with non-degenerate groups of symmetries may eventually lead to a system of equations describing network dynamics at small scales. (paper)

  19. Smartphone attachment for stethoscope recording.

    Science.gov (United States)

    Thompson, Jeff

    2015-01-01

    With the ubiquity of smartphones and the rising technology of 3D printing, novel devices can be developed that leverage the "computer in your pocket" and rapid prototyping technologies toward scientific, medical, engineering, and creative purposes. This paper describes such a device: a simple 3D-printed extension for Apple's iPhone that allows the sound from an off-the-shelf acoustic stethoscope to be recorded using the phone's built-in microphone. The attachment's digital 3D files can be easily shared, modified for similar phones and devices capable of recording audio, and in combination with 3D printing technology allow for fabrication of a durable device without need for an entire factory of expensive and specialized machining tools. It is hoped that by releasing this device as an open source set of printable files that can be downloaded and reproduced cheaply, others can make use of these developments where access to cost-prohibitive, specialized medical instruments are not available. Coupled with specialized smartphone software ("apps"), more sophisticated and automated diagnostics may also be possible on-site.

  20. Iodine susceptibility of pseudomonads grown attached to stainless steel surfaces

    Science.gov (United States)

    Pyle, B. H.; McFeters, G. A.

    1990-01-01

    Pseudomonads were adapted to grow in phosphate-buffered water and on stainless steel surfaces to study the iodine sensitivity of attached and planktonic cells. Cultures adapted to low nutrient growth were incubated at room temperature in a circulating reactor system with stainless steel coupons to allow biofilm formation on the metal surfaces. In some experiments, the reactor was partially emptied and refilled with buffer at each sampling time to simulate a "fill-and-draw" water system. Biofilms of attached bacteria, resuspended biofilm bacteria, and reactor suspension, were exposed to 1 mg l-1 iodine for 2 min. Attached bacterial populations which established on coupons within 3 to 5 days displayed a significant increase in resistance to iodine. Increased resistance was also observed for resuspended cells from the biofilm and planktonic bacteria in the system suspension. Generally, intact biofilms and resuspended biofilm cells were most resistant, followed by planktonic bacteria and phosphate buffer cultures. Thus, biofilm formation on stainless steel surfaces within water systems can result in significantly increased disinfection resistance of commonly-occurring water-borne bacteria that may enhance their ability to colonise water treatment and distribution systems.

  1. Ketogenic diet treatment for pediatric super-refractory status epilepticus.

    Science.gov (United States)

    Appavu, Brian; Vanatta, Lisa; Condie, John; Kerrigan, John F; Jarrar, Randa

    2016-10-01

    We aimed to study whether ketogenic diet (KD) therapy leads to resolution of super-refractory status epilepticus in pediatric patients without significant harm. A retrospective review was performed at Phoenix Children's Hospital on patients with super-refractory status epilepticus undergoing ketogenic diet therapy from 2011 to 2015. Ten children with super-refractory status epilepticus, ages 2-16 years, were identified. 4/10 patients had immune mediated encephalitis, including Rasmussen encephalitis, anti-N-methyl-d-aspartate receptor encephalitis, and post-infectious mycoplasma encephalitis. Other etiologies included Lennox Gastaut Syndrome, non-ketotic hyperglycinemia, PCDH19 and GABRG2 genetic epilepsy, New Onset Refractory Status Epilepticus, and Febrile Infection-Related Epilepsy Syndrome. 4/10 patients' EEG features suggested focal with status epilepticus, and 6/10 suggested generalized with status epilepticus. Median hospital length was 61days and median ICU length was 27days. The median number of antiepileptic medications prior to diet initiation was 3.0 drugs, and the median after ketogenic diet treatment was 3.5 drugs. Median duration of status epilepticus prior to KD was 18days. 9/10 patients had resolution of super-refractory status epilepticus in a median of 7days after diet initiation. 8/9 patients were weaned off anesthesia within 15days of diet initiation, and within 1day of achieving ketonuria. 1/10 patients experienced side effects on the diet requiring supplementation. Most patients achieved resolution of status epilepticus on KD therapy, suggesting it could be an effective therapy that can be utilized early in the treatment of children with super refractory status epilepticus. Copyright © 2016. Published by Elsevier Ltd.

  2. Investigation of the structure of nanocrystalline refractory oxides by X-ray diffraction, electron microscopy, and atomic force microscopy

    International Nuclear Information System (INIS)

    Ulyanova, T. M.; Titova, L. V.; Medichenko, S. V.; Zonov, Yu. G.; Konstantinova, T. E.; Glazunova, V. A.; Doroshkevich, A. S.; Kuznetsova, T. A.

    2006-01-01

    The structures of nanocrystalline fibrous powders of refractory oxides have been investigated by different methods: determination of coherent-scattering regions, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic-force microscopy (AFM). The sizes of nanograins of different crystalline phases of refractory metal oxides have been determined during the formation of these nanograins and the dynamics of their growth during heat treatment in the temperature range 600-1600 deg. C has been studied. The data on the structure of nanocrystalline refractory oxide powders, obtained by different methods, are in good agreement. According to the data on coherent-scattering regions, the sizes of the ZrO 2 (Y 2 O 3 ) and Al 2 O 3 grains formed are in the range 4-6 nm, and the particle sizes determined according to the TEM and AFM data are in the ranges 5-7 and 2-10 nm, respectively. SEM analysis made it possible to investigate the dynamics of nanoparticle growth at temperatures above 1000 deg. C and establish the limiting temperatures of their consolidation in fibers

  3. Refractory experience in circulating fluidized bed combustors, Task 7

    Energy Technology Data Exchange (ETDEWEB)

    Vincent, R.Q.

    1989-11-01

    This report describes the results of an investigation into the status of the design and selection of refractory materials for coal-fueled circulating fluidized-bed combustors. The survey concentrated on operating units in the United States manufactured by six different boiler vendors: Babcock and Wilcox, Combustion Engineering, Foster Wheeler, Keeler Dorr-Oliver, Pyropower, and Riley Stoker. Information was obtained from the boiler vendors, refractory suppliers and installers, and the owners/operators of over forty units. This work is in support of DOE's Clean Coal Technology program, which includes circulating fluidized-bed technology as one of the selected concepts being evaluated.

  4. Evaluation of refractory materials for a nuclear waste incinerator

    International Nuclear Information System (INIS)

    Grotzky, V.K.; Kneale, P.A.; Teter, A.R.

    1980-01-01

    An experiment to find a suitable refractory lining for a nuclear waste incinerator has been completed. Eleven brick and six castable products were analyzed by optical and scanning microscopy. All the materials were fashioned into cup shapes and subjected to temperatures ranging from 800 to 1200 0 C for as long as six weeks. Some of the cups were charged weekly with pellets made from ash materials that would contact an incinerator liner. Refractory products containing a high percentage of aluminum oxide had the greatest resistance to cracking and slag buildup. 35 figures

  5. MICROWAVE MEASUREMENT OF REFRACTORY MATERIALS AT HIGH-TEMPERATURE

    International Nuclear Information System (INIS)

    Kharkovsky, S.; Zoughi, R.; Smith, J.; Davis, B.; Limmer, R.

    2009-01-01

    Knowledge of the electrical behavior of refractory materials may enable the development and optimization of microwave nondestructive techniques to detect and evaluate changes in their physical properties while the materials are in service. This paper presents the results of a limited and preliminary investigation in which two refractory materials (dense chrome and dense zircon) were subjected to increasing temperature in a furnace and in which a frequency-modulated continuous-wave radar operating in the frequency range of 8-18 GHz radar was used to evaluate their attenuation properties.

  6. Microwave Measurement of Refractory Materials at High-Temperature

    Science.gov (United States)

    Kharkovsky, S.; Zoughi, R.; Smith, J.; Davis, B.; Limmer, R.

    2009-03-01

    Knowledge of the electrical behavior of refractory materials may enable the development and optimization of microwave nondestructive techniques to detect and evaluate changes in their physical properties while the materials are in service. This paper presents the results of a limited and preliminary investigation in which two refractory materials (dense chrome and dense zircon) were subjected to increasing temperature in a furnace and in which a frequency-modulated continuous-wave radar operating in the frequency range of 8-18 GHz radar was used to evaluate their attenuation properties.

  7. Attachment and Socioemotional Problems in Middle Childhood

    Science.gov (United States)

    Moss, Ellen; Lecompte, Vanessa

    2015-01-01

    In this article, we will evaluate the evidence concerning links between attachment and behavior problems in the middle childhood period. We will first provide a general introduction to the question of attachment and maladaptation in the middle childhood period, and then examine the recent empirical evidence with respect to both externalizing and…

  8. Parent-Child Attachment and Emotion Regulation

    Science.gov (United States)

    Brumariu, Laura E.

    2015-01-01

    Given the centrality of both parent-child attachment and emotion regulation in children's development and adjustment, it is important to evaluate the relations between these constructs. This article discusses conceptual and empirical links between attachment and emotion regulation in middle childhood, highlights progress and challenges in the…

  9. Study on thermocouple attachment in reflood experiments

    International Nuclear Information System (INIS)

    Sugimoto, Jun

    1977-03-01

    The method of thermocouple attachment to a heater rods has been studied for surface temperature measurement in reflood experiments. The method used as far in JAERI's reflood experiments had some possibilities of not estimating exactly the quench times. Various attachment method have been tested and some proved to be effective in the respect. (auth.)

  10. The role of time in place attachment

    Science.gov (United States)

    David Smaldone

    2007-01-01

    Quantitative studies have found that the length of association is an important variable affecting place attachment (Kaltenborn 1998, Moore & Graefe 1994, Patterson & Williams 1991, Vorkinn & Riese 2001). These studies, however, have provided less insight into how and why time is involved in the process of forming place attachment, as well as the meanings...

  11. Internal Representational Models of Attachment Relationships.

    Science.gov (United States)

    Crittenden, Patricia M.

    This paper outlines several properties of internal representational models (IRMs) and offers terminology that may help to differentiate the models. Properties of IRMs include focus, memory systems, content, cognitive function, "metastructure," quality of attachment, behavioral strategies, and attitude toward attachment. An IRM focuses on…

  12. Attachment of Salmonella spp. to pork meat

    DEFF Research Database (Denmark)

    Hansen, Trine; Riber, Leise; Löfström, Charlotta

    2011-01-01

    Five strains of Salmonella, one wildtype and four knock-out mutants (the prg, flhDC, yhjH and fliC genes) were investigated based on their probability to attach and subsequently detach from a surface of pork fillet. The attachment followed by detachment was measured and modelled for two different...

  13. Attachment Theory and Neuroscience for Care Managers.

    Science.gov (United States)

    Blakely, Thomas J; Dziadosz, Gregory M

    2016-09-01

    This article describes a model for care managers that is based on attachment theory supplemented by knowledge from neuroscience. Together, attachment theory and basic knowledge from neuroscience provide for both an organizing conceptual framework and a scientific, measureable approach to assessment and planning interventions in a care plan.

  14. Attachment in young children with incarcerated fathers.

    Science.gov (United States)

    Poehlmann-Tynan, Julie; Burnson, Cynthia; Runion, Hilary; Weymouth, Lindsay A

    2017-05-01

    The present study examined young children's attachment behaviors during paternal incarceration and reported on initial validity of a new measure used to rate children's attachment-related behaviors and emotions during visits in a corrections setting. Seventy-seven children, age 2 to 6 years, and their jailed fathers and current caregivers participated in the home visit portion of the study, whereas 28 of these children participated in the jail visit. The results indicated that 27% of children witnessed the father's crime and 22% of children witnessed the father's arrest, with most children who witnessed these events exhibiting extreme distress; children who witnessed these events were more likely to have insecure attachments to their caregivers. Consistent with attachment theory and research, caregivers who exhibited more sensitivity and responsivity during interactions with children and those who provided more stimulating, responsive, learning-oriented home environments had children who were more likely to have secure attachments (measured with the Attachment Q-Sort). We also found preliminary evidence for the validity of our new measure, the Jail Prison Observation Checklist, in that children's attachment-related behaviors and emotions during the jail visit correlated with their attachment security observed in the home. Our observations indicate that, in certain contexts, noncontact visits with incarcerated parents can be stressful for children and that children's caregivers may play a significant role during these visits.

  15. Insecure attachment and anxiety in student athletes.

    Science.gov (United States)

    Han, D H; Kim, S M; Zaichkowsky, L

    2013-06-01

    The main purpose of our research was to examine attachment type and competition anxiety in high school student athletes and general high school students. We recruited 465 student athletes and 543 general students to participate in our study. The Revised Korean version of the Experiences in Close Relationships Scale (K-ECRS) and the Competitive State Anxiety Inventory-2 (CSAI-2) were given to all students. In χ2 tests, athletes showed attachment types in the following order of prevalence: fearful, dismissive, and preoccupied, compared to the fearful, preoccupied, and dismissive order observed in general students. In parametric, independent t-tests, athletes reported significantly higher cognitive anxiety scores, relative to general students. Further, athletes with insecure attachment compared to those with secure attachment reported higher cognitive anxiety scores and self-confidence scores. In both the athletes with insecure attachment and general students with insecure attachment groups, the K-ECRS anxiety subscale was significantly correlated with CSAI-2 total score. In post hoc analysis in the athletes with insecure attachment group, the K-ECRS anxiety subscale was also significantly correlated with the CSAI-2 cognitive anxiety subscale. These results suggest that anxious athletes with an insecure attachment style tend to exaggerate threats from both external and internal sources, which negatively affect their performances.

  16. Attachment Representations and Time Perspective in Adolescence

    Science.gov (United States)

    Laghi, Fiorenzo; D'Alessio, Maria; Pallini, Susanna; Baiocco, Roberto

    2009-01-01

    This study examines the relationship between attachment to parents and peers, time perspective and psychological adjustment in adolescence. 2,665 adolescents (M age = 17.03 years, SD = 1.48) completed self-report measures about parent and peer attachment, time perspective, sympathy and self-determination. Subjects were divided into four groups…

  17. performance characteristics of a cam turning attachment

    African Journals Online (AJOL)

    Dr Obe

    ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

  18. Adolescent Self-Esteem, Attachment and Loneliness

    Science.gov (United States)

    Dhal, Anubha; Bhatia, Sangeeta; Sharma, Vidhi; Gupta, Priyanka

    2007-01-01

    Objectives: To assess self-esteem, loneliness and attachment styles among adolescents and examine their association with each other and with age and gender. Method: Adolescents (55 males and 55 females) from a public school in Delhi, aged 10-13 years were administered Coopersmith Self-Esteem Inventory (School Form), Attachment Scale and UCLA…

  19. Testing refractory concretes and filling masses using laboratory gas dynamic bench

    International Nuclear Information System (INIS)

    Delkin, E.Ya.; Krasnikov, A.V.; Kurtepova, O.I.; Chubarov, Yu.I.

    1983-01-01

    Heat resistance of cylindrical models of refractory concretes on the base of different binding and filling masses at one-side heating is investigated. Heat resistance has been estimated by residual tensile strength. Concrete on the base of barium zirconate is shown to have the highest heat resistance. The effect of relation of the diameter and height of cylindrical samples on the value of thermal stresses arising at one-side heating is displayed on the example of concrete on phosphate binding. Tests of binding mass on the base of ZrO 2 reinforced with metallic honeycombs have revealed that use of copper honeycomb frame in elements of the design operating under the effect of strong thermal flows is rather effective

  20. Flotation-nitric acid leach procedure for increasing uranium recovery from a refractory ore

    International Nuclear Information System (INIS)

    Carnahan, T.G.; Lei, K.P.V.

    1979-01-01

    The Bureau of Mines investigated a flotation-nitric acid leach procedure as part of the goal to maximize minerals and metals recovered from primary and secondary domestic resources. Studies were conducted on an ore that contained carbon-bearing and sulfide mineralization that rendered a portion of the ore refractory (resistant) to conventional leaching technology. The procedure investigated for treating the ore consisted of the following: (1) separation by flotation of the carbonaceous and sulfidic components from the ore, (2) leaching the flotation concentrate with nitric acid at 100 0 to 110 0 C, (3) leaching the flotation tailings with sulfuric acid, and (4) processing the combined leached slurries in a conventional manner to recover yellow cake. In step 2, HNO 3 is converted to gaseous products from which it is regenerated by reacting these products with air and water for further leaching. An overall uranium extraction of 96% was achieved by this procedure

  1. Attachment Patterns in the Psychotherapy Relationship: Development of the Client Attachment to Therapist Scale.

    Science.gov (United States)

    Mallinckrodt, Brent; And Others

    1995-01-01

    Describes development of an instrument, the Client Attachment to Therapist Scale (CATS). CATS factors correlated in expected directions with survey measures of object relations, client-rated working alliance, social self-efficacy, and adult attachment. Cluster analysis revealed four types of client attachment. Discusses implications of attachment…

  2. Attachment and children's biased attentional processing: evidence for the exclusion of attachment-related information.

    Directory of Open Access Journals (Sweden)

    Eva Vandevivere

    Full Text Available Research in both infants and adults demonstrated that attachment expectations are associated with the attentional processing of attachment-related information. However, this research suffered from methodological issues and has not been validated across ages. Employing a more ecologically valid paradigm to measure attentional processes by virtue of eye tracking, the current study tested the defensive exclusion hypothesis in late childhood. According to this hypothesis, insecurely attached children are assumed to defensively exclude attachment-related information. We hypothesized that securely attached children process attachment- related neutral and emotional information in a more open manner compared to insecurely attached children. Sixty-two children (59.7% girls, 8-12 years completed two different tasks, while eye movements were recorded: task one presented an array of neutral faces including mother and unfamiliar women and task two presented the same with happy and angry faces. Results indicated that more securely attached children looked longer at mother's face regardless of the emotional expression. Also, they tend to have more maintained attention to mother's neutral face. Furthermore, more attachment avoidance was related to a reduced total viewing time of mother's neutral, happy, and angry face. Attachment anxiety was not consistently related to the processing of mother's face. Findings support the theoretical assumption that securely attached children have an open manner of processing all attachment-related information.

  3. Solidification of refractory materials processed in the ultra high vacuum drop tube at the CEREM-Grenoble

    International Nuclear Information System (INIS)

    Vinet, B.; Cini, E.; Tournier, S.; Cortella, L.

    1994-01-01

    Undercooling experiments have been performed on refractory materials by processing in a high drop-tube. Emphasis is put on general aspects of surface and bulk microstructures of solidified droplets, including pure metals (W, Re, Ta, Mo, Nb, Ir, Zr) and alloys (W-Re, Mo-Re, Ta-Zr). It is shown that recrystallization often causes polycrystallinity. Moreover, the microstructure is closely related to undercooling amount prior solidification. The effect of secondary cooling on microstructure can also be studied by quenching the samples in solid tin at the end of free-fall. (authors). 20 refs., 11 figs

  4. Pembrolizumab in Treating Younger Patients With Recurrent, Progressive, or Refractory High-Grade Gliomas, Diffuse Intrinsic Pontine Gliomas, Hypermutated Brain Tumors, Ependymoma or Medulloblastoma

    Science.gov (United States)

    2018-06-18

    Constitutional Mismatch Repair Deficiency Syndrome; Lynch Syndrome; Malignant Glioma; Progressive Ependymoma; Progressive Medulloblastoma; Recurrent Brain Neoplasm; Recurrent Childhood Ependymoma; Recurrent Diffuse Intrinsic Pontine Glioma; Recurrent Medulloblastoma; Refractory Brain Neoplasm; Refractory Diffuse Intrinsic Pontine Glioma; Refractory Ependymoma; Refractory Medulloblastoma

  5. Attachment and eating disorders: a research update.

    Science.gov (United States)

    Tasca, Giorgio A

    2018-03-16

    Prominent models of eating disorders tend to focus on cognitive and behavioral features, but tend not to consider important developmental issues related to affect regulation, interpersonal style, self concept, and mentalization-all of which are well conceptualized within attachment theory. Higher levels of attachment insecurity across diagnoses are related to greater eating disorder symptoms. Low parental care and early trauma may lead to attachment insecurity that then might lead to greater eating disorder symptoms. The association between insecure attachment and eating disorder severity is likely mediated by affect dysregulation and perfectionism. Recent research using the Adult Attachment Interview highlights the importance of reflective functioning in predicting treatment response and therapeutic processes, and on the utility of therapies that increase mentalization. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Liquid metal pump

    Science.gov (United States)

    Pennell, William E.

    1982-01-01

    The liquid metal pump comprises floating seal rings and attachment of the pump diffuser to the pump bowl for isolating structural deflections from the pump shaft bearings. The seal rings also eliminate precision machining on large assemblies by eliminating the need for a close tolerance fit between the mounting surfaces of the pump and the seals. The liquid metal pump also comprises a shaft support structure that is isolated from the pump housing for better preservation of alignment of shaft bearings. The shaft support structure also allows for complete removal of pump internals for inspection and repair.

  7. Liquid metal pump

    International Nuclear Information System (INIS)

    Pennell, W.E.

    1982-01-01

    The liquid metal pump comprises floating seal rings and attachment of the pump diffuser to the pump bowl for isolating structural deflections from the pump shaft bearings. The seal rings also eliminate precision machining on large assemblies by eliminating the need for a close tolerance fit between the mounting surfaces of the pump and the seals. The liquid metal pump also comprises a shaft support structure that is isolated from the pump housing for better preservation of alignment of shaft bearings. The shaft support structure also allows for complete removal of pump internals for inspection and repair

  8. The process of developing and changing of infant-teacher attachment : A study on an infant whose attachment to the first attachment figure is insecure

    OpenAIRE

    上田, 七生

    2003-01-01

    Toward infants whose attachment to their first attachment figures (mainly their mothers) is insecure, how can we intervene in them? To reveal it, an observation was carried out regularly once a week, over a period of 9 months. The subjects were an infant who has insecure attachment and comparative one who has secure attachment. And the attachment behaviors they exhibited toward nursery school teachers, strangers, and an observer were counted. The amount of the attachment behaviors of the infa...

  9. Efficacy and Safety of Rituximab in Children with Refractory Nephrotic Syndrome; A Multicenter Clinical Trial

    Directory of Open Access Journals (Sweden)

    Yo Han Ahn

    2014-06-01

    Conclusions: In this interim analysis of clinical trial to evaluate the efficacy and safety of RTX in children with refractory NS, RTX treatment for refractory NS was safe and effective, especially in patients with DNS.

  10. Long-term effects of electrical neurostimulation in patients with unstable angina : Refractory to conventional therapies

    NARCIS (Netherlands)

    de Vries, Jessica; DeJongste, Mike J. L.; Zijlstra, Felix; Staal, Michiel

    2007-01-01

    Background. Patients with unstable angina pectoris may become refractory to conventional therapies. Electrical neurostimulation with transcutaneous electrical stimulation and/or spinal cord stimulation has been shown to be effective for patients with refractory unstable angina pectoris in hospital

  11. Long-term evaluation of treatment of chronic, therapeutically refractory tinnitus by neurostimulation

    NARCIS (Netherlands)

    Staal, M. J.; Holm, A. F.; Mooij, J. J. A.; Albers, F. W. J.; Bartels, H.

    2007-01-01

    Objective: Long-term evaluation of treatment of chronic, therapeutically refractory tinnitus by means of chronic electrical stimulation of the vestibulocochlear nerve. Patients: Inclusion criteria were severe, chronic, therapeutically refractory, unilateral tinnitus and severe hearing loss at the

  12. Breastfeeding, Parenting, and Infant Attachment Behaviors.

    Science.gov (United States)

    Gibbs, Benjamin G; Forste, Renata; Lybbert, Emily

    2018-04-01

    Objectives Infants and toddlers need secure attachments in order to develop the social competence required to successfully navigate later peer and adult relationships. Breastfeeding is a parenting factor that has been associated with child emotional development-specifically the attachment between children and their mothers. Yet, this link may simply be the result of other parenting behaviors that are associated with breastfeeding. Thus, our objective is to examine whether the link between infant attachment behaviors and breastfeeding endures when accounting for a broad array of in-depth measures of parenting. Methods We use the Early Childhood Longitudinal Study of children from 9 months to 2 years of age collected by the National Center for Education Statistics. Using Ordinary Least Squares regression, data analyses examine the association between the Toddler Attachment Sort-45 (TAS-45) measures of toddler-parent attachment (infant attachment security and temperamental dependency) and breastfeeding practices. We also examine individual items of the TAS-45 to isolate specific attachment behaviors that have the strongest associations with breastfeeding. Results We find an enduring link between children who are predominantly breastfed for six or more months and infant attachment security. However, we find no evidence that breastfeeding is linked to a child's temperamental dependency. Of the nine items used to examine infant attachment behaviors, we find that breastfed children are rated as having slightly higher scores on two measures ("warm and cuddly," "cooperative") and lower scores on one measure ("demanding/angry"). Conclusions for Practice Breastfeeding has an important link to the child's use of their caregiver as a secure base for exploration and a place of comfort when distressed (infant attachment security). Yet, breastfeeding does not appear to reduce a child's temperamental dependency or level of clinginess as measured by how demanding, fussy or

  13. Iron-Refractory Iron Deficiency Anemia

    Directory of Open Access Journals (Sweden)

    Ebru Yılmaz Keskin

    2015-03-01

    Full Text Available Demir, oksijenin taşınması, DNA sentezi ve hücre çoğalması gibi çeşitli biyolojik reaksiyonlar için vazgeçilmez olduğundan, yaşam için zorunludur. Demir metabolizması ve bu elementin düzenlenmesiyle ilgili bilgilerimiz, son yıllarda belirgin şekilde değişmiştir. Demir metabolizması ile ilgili yeni bozukluklar tanımlanmış ve demirin başka bozuklukların kofaktörü olduğu anlaşılmaya başlamıştır. Hemokromatozis ve demir tedavisine dirençli demir eksikliği anemisi (IRIDA; “iron-refractory iron deficiency anemia” gibi genetik durumlar üzerinde yapılan çalışmalar, vücuttaki demir dengesini kontrol eden moleküler mekanizmalar ile ilgili önemli ipuçları sunmuştur. Bu ilerlemeler, gelecekte, hem genetik hem de kazanılmış demir bozukluklarının daha etkili şekilde tedavi edilmesi amacıyla kullanılabilir. IRIDA, demir eksikliği ile giden durumlarda, hepsidin üretimini baskılayan matriptaz-2’yi kodlayan TMPRSS6 genindeki mutasyonlardan kaynaklanmaktadır. Hastalığın tipik özellikleri, hipokrom, mikrositer anemi, çok düşük ortalama eritrosit hacmi, oral demir tedavisine yanıtsızlık (veya yetersiz yanıt ve parenteral demire kısmi yanıttır. Klasik demir eksikliği anemisinin aksine, serum ferritin değeri genellikle hafif düşük ya da normal aralıkta; serum ve idrar hepsidin değerleri ise, aneminin derecesi ile orantısız şekilde yüksek bulunur. Şimdiye kadar literatürde bildirilmiş olguların sayısı 100’ü geçmediği halde, IRIDA’nın, “atipik” mikrositik anemilerin en sık nedeni olduğu düşünülmektedir. Bu derlemenin amacı, IRIDA hakkındaki güncel bilgileri araştırıcılar ile paylaşmak ve bu alandaki farkındalıklarını arttırmaktır.

  14. System and process for aluminization of metal-containing substrates

    Energy Technology Data Exchange (ETDEWEB)

    Chou, Yeong-Shyung; Stevenson, Jeffry W.

    2017-12-12

    A system and method are detailed for aluminizing surfaces of metallic substrates, parts, and components with a protective alumina layer in-situ. Aluminum (Al) foil sandwiched between the metallic components and a refractory material when heated in an oxidizing gas under a compression load at a selected temperature forms the protective alumina coating on the surface of the metallic components. The alumina coating minimizes evaporation of volatile metals from the metallic substrates, parts, and components in assembled devices that can degrade performance during operation at high temperature.

  15. System and process for aluminization of metal-containing substrates

    Science.gov (United States)

    Chou, Yeong-Shyung; Stevenson, Jeffry W

    2015-11-03

    A system and method are detailed for aluminizing surfaces of metallic substrates, parts, and components with a protective alumina layer in-situ. Aluminum (Al) foil sandwiched between the metallic components and a refractory material when heated in an oxidizing gas under a compression load at a selected temperature forms the protective alumina coating on the surface of the metallic components. The alumina coating minimizes evaporation of volatile metals from the metallic substrates, parts, and components in assembled devices during operation at high temperature that can degrade performance.

  16. The relation of infant attachment to attachment and cognitive and behavioural outcomes in early childhood.

    Science.gov (United States)

    Ding, Yan-hua; Xu, Xiu; Wang, Zheng-yan; Li, Hui-rong; Wang, Wei-ping

    2014-09-01

    In China, research on the relation of mother-infant attachment to children's development is scarce. This study sought to investigate the relation of mother-infant attachment to attachment, cognitive and behavioural development in young children. This study used a longitudinal study design. The subjects included healthy infants (n=160) aged 12 to 18 months. Ainsworth's "Strange Situation Procedure" was used to evaluate mother-infant attachment types. The attachment Q-set (AQS) was used to evaluate the attachment between young children and their mothers. The Bayley scale of infant development-second edition (BSID-II) was used to evaluate cognitive developmental level in early childhood. Achenbach's child behaviour checklist (CBCL) for 2- to 3-year-olds was used to investigate behavioural problems. In total, 118 young children (73.8%) completed the follow-up; 89.7% of infants with secure attachment and 85.0% of infants with insecure attachment still demonstrated this type of attachment in early childhood (κ=0.738, pInfants with insecure attachment collectively exhibited a significantly lower mental development index (MDI) in early childhood than did infants with secure attachment, especially the resistant type. In addition, resistant infants were reported to have greater social withdrawal, sleep problems and aggressive behaviour in early childhood. There is a high consistency in attachment development from infancy to early childhood. Secure mother-infant attachment predicts a better cognitive and behavioural outcome; whereas insecure attachment, especially the resistant attachment, may lead to a lower cognitive level and greater behavioural problems in early childhood. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Testing of the melter lid refractory for the West Valley Demonstration Project (WVDP)

    International Nuclear Information System (INIS)

    Gupta, A.; Jain, V.; Mahoney, J.L.; Holman, T.M.

    1991-01-01

    Monofrax H and Mulfrax 202 refractory were tested for potential application as the melter lid refractory for the WVDP. Resistance to spalling and corrosion by the slurry and offgas salts were primary criteria for selection. Test specimens were subjected to thermal cycling between 450 and 1,100C for five weeks. Visual examination indicated some corrosion but no spalling. SEM/EDS analysis was performed to determine the glass/refractory interface corrosion mechanism. The refractory selection basis will be discussed

  18. Compressive intrinsic stress originates in the grain boundaries of dense refractory polycrystalline thin films

    Energy Technology Data Exchange (ETDEWEB)

    Magnfält, D., E-mail: danma@ifm.liu.se; Sarakinos, K. [Nanoscale Engineering Division, Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-581 83 Linköping (Sweden); Fillon, A.; Abadias, G. [Institut P' , Département Physique et Mécanique des Matériaux, Université de Poitiers-CNRS-ENSMA, SP2MI, Téléport 2, Bd M. et P. Curie, F-86962 Chasseneuil-Futuroscope (France); Boyd, R. D.; Helmersson, U. [Plasma and Coatings Physics Division, Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-581 83 Linköping (Sweden)

    2016-02-07

    Intrinsic stresses in vapor deposited thin films have been a topic of considerable scientific and technological interest owing to their importance for functionality and performance of thin film devices. The origin of compressive stresses typically observed during deposition of polycrystalline metal films at conditions that result in high atomic mobility has been under debate in the literature in the course of the past decades. In this study, we contribute towards resolving this debate by investigating the grain size dependence of compressive stress magnitude in dense polycrystalline Mo films grown by magnetron sputtering. Although Mo is a refractory metal and hence exhibits an intrinsically low mobility, low energy ion bombardment is used during growth to enhance atomic mobility and densify the grain boundaries. Concurrently, the lateral grain size is controlled by using appropriate seed layers on which Mo films are grown epitaxially. The combination of in situ stress monitoring with ex situ microstructural characterization reveals a strong, seemingly linear, increase of the compressive stress magnitude on the inverse grain size and thus provides evidence that compressive stress is generated in the grain boundaries of the film. These results are consistent with models suggesting that compressive stresses in metallic films deposited at high homologous temperatures are generated by atom incorporation into and densification of grain boundaries. However, the underlying mechanisms for grain boundary densification might be different from those in the present study where atomic mobility is intrinsically low.

  19. The attachment system in fledgling relationships: an activating role for attachment anxiety.

    Science.gov (United States)

    Eastwick, Paul W; Finkel, Eli J

    2008-09-01

    Is it sensible to study attachment dynamics between potential romantic partners before they share a full-fledged attachment bond? The present data indicate that such an approach may reveal novel insights about initial attraction processes. Four studies suggest that the state-like experience of attachment anxiety has functional implications within fledgling (i.e., desired or undeveloped) romantic relationships, well before the formation of an attachment bond. Studies 1 and 3 reveal that attachment anxiety directed toward a particular romantic interest is elevated before (in comparison with after) participants report being in an established relationship. Studies 2 and 3 demonstrate that such partner-specific attachment anxiety predicts attachment-relevant outcomes in fledgling relationships, including proximity seeking, safe haven, secure base, passionate love, and other approach behaviors. These associations were reliable above and beyond (and were typically as strong as or stronger than) the effect of sexual desire. Finally, Study 4 presents evidence that partner-specific attachment anxiety may cause several of these attachment-relevant outcomes. Attachment anxiety seems to be a normative experience and may signal the activation of the attachment system during the earliest stages of romantic relationships.

  20. Outcomes in Children Treated with Pentobarbital Infusion for Refractory and Super-Refractory Status Epilepticus.

    Science.gov (United States)

    Erklauer, Jennifer; Graf, Jeanine; McPherson, Mona; Anderson, Anne; Wilfong, Angus; Minard, Charles G; Loftis, Laura

    2018-03-26

    Functional neurologic outcome for children with refractory and super-refractory status epilepticus has not been well defined. Retrospective chart review including children age 0-17 years who received pentobarbital infusion from 2003 to 2016 for status epilepticus. Outcomes were defined in terms of mortality, need for new medical technology assistance at hospital discharge and functional neurologic outcome determined by pediatric cerebral performance category score (PCPC). Potential patient characteristics associated with functional neurologic outcome including age, sex, ethnicity, etiology of the status epilepticus, and duration of pentobarbital infusion were evaluated. Forty children met inclusion criteria. In-hospital mortality was 30% (12/40). Of survivors, 21% (6/28) returned to baseline PCPC while half (14/28) declined in function ≥ 2 PCPC categories at hospital discharge. 25% (7/28) of survivors required tracheostomy and 27% (7/26) required new gastrostomy. Seizures persisted at discharge for most patients with new onset status epilepticus while the majority of patients with known epilepsy returned to baseline seizure frequency. Etiology (p = 0.015), PCPC at admission (p = 0.0006), new tracheostomy (p = 0.012), and new gastrostomy tube (p = 0.012) were associated with increase in PCPC score ≥ 2 categories in univariable analysis. Duration of pentobarbital infusion (p = 0.005) and length of hospital stay (p = 0.056) were longer in patients who demonstrated significant decline in neurologic function. None of these variables maintained statistical significance when multiple logistic regression model adjusting for PCPC score at admission was applied. At long-term follow-up, 36% (8/22) of children demonstrated improvement in PCPC compared to discharge and 23% (5/22) showed deterioration including three additional deaths. Mortality in this population was high. The majority of children experienced some degree of disability at discharge. Despite

  1. Bone marrow immunophenotyping by flow cytometry in refractory cytopenia of childhood

    NARCIS (Netherlands)

    A.M. Aalbers (Anna Maartje); M.M. van den Heuvel-Eibrink (Marry); I. Baumann (Irith); M.N. Dworzak (Michael); H. Hasle (Henrik); F. Locatelli (Franco); B. de Moerloose (Barbara); M. Schmugge; E. Mejstříková (Ester); M. Nováková (Michaela); M. Zecca (Marco); C.M. Zwaan (Christian Michel); J.G. te Marvelde (Jeroen); A.W. Langerak (Anton); J.J.M. van Dongen (Jacques); R. Pieters (Rob); C.M. Niemeyer (Charlotte); V.H.J. van der Velden (Vincent)

    2015-01-01

    textabstractRefractory cytopenia of childhood is the most common type of childhood myelodysplastic syndrome. Because the majority of children with refractory cytopenia have a normal karyotype and a hypocellular bone marrow, differentiating refractory cytopenia from the immune-mediated bone marrow

  2. Templated synthesis of metal nanorods in silica nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Yadong; Gao, Chuanbo

    2018-04-10

    A method of preparing a metal nanorod. The method includes seeding a metal nanoparticle within the lumen of a nanotube, and growing a metal nanorod from the seeded metal nanoparticle to form a metal nanorod-nanotube composite. In some cases, the nanotube includes metal binding ligands attached to the inner surface. Growing of the metal nanorod includes incubating the seeded nanotube in a solution that includes: a metal source for the metal in the metal nanorod, the metal source including an ion of the metal; a coordinating ligand that forms a stable complex with the metal ion; a reducing agent for reducing the metal ion, and a capping agent that stabilizes atomic monomers of the metal. Compositions derived from the method are also provided.

  3. Clinical and etiological profile of refractory rickets from western India.

    Science.gov (United States)

    Joshi, Rajesh R; Patil, Shailesh; Rao, Sudha

    2013-07-01

    To present clinical and etiological profile of refractory rickets from Mumbai. Case records of 36 patients presenting over 2½ y with refractory rickets were evaluated with respect to clinical presentation, biochemical, radiological features and where needed, ophthalmological examination, ultrasonography and special tests on blood and urine. Twenty three (63 %) patients had renal tubular acidosis (RTA)-distal RTA in 20 and proximal RTA in 3 patients; 5 (14 %) had vitamin D dependent rickets (VDDR I in 2 and VDDR II in 3 patients), 4 (11 %) had chronic renal failure (CRF) and 2 each (6 %) had hypophosphatemic rickets and chronic liver disease as cause of refractory rickets. A significant proportion of patients with RTA and VDDR showed skeletal changes of rickets in the first 2 y of life, while those with hypophosphatemic rickets presented later. Patients with hypophosphatemic rickets had predominant involvement of lower limbs, normal blood calcium and PTH levels and phosphorus leak in urine. All patients with RTA presented with failure to thrive, polyuria and marked rickets; blood alkaline phosphatase levels being normal in almost 50 % patients. Three (75 %) patients with rickets due to CRF had GFR rickets inspite of taking high dose of vitamin D orally. Refractory rickets is a disorder of multiple etiologies; a good history and clinical examination supplemented with appropriate investigations helps to determine its cause.

  4. Anaesthesia for left thoracoscopic sympathectomy for refractory long ...

    African Journals Online (AJOL)

    ... mutations including life-threatening cardiac arrhythmias and sudden death. Left thoracoscopic sympathectomy is an effective treatment for patients who are refractory to medical therapy or who need frequent epicardial internal cardio defibrillator intervention. The authors report three cases, one adult and two children, who ...

  5. Productivity Costs in Patients with Refractory Chronic Rhinosinusitis

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L.; Schlosser, Rodney J.; Hwang, Peter H.; Mace, Jess C.; Soler, Zachary M.

    2014-01-01

    Objective Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Study Design Prospective, multi-institutional, observational cohort study. Methods The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US National Census and the 2013 US Department of Labor statistics. Results A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism was 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r=0.440; p=0.001). Conclusion Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. PMID:24619604

  6. [Nursing management of a refractory cardiac death donor].

    Science.gov (United States)

    Kaufmann, Marion

    2016-09-01

    The nursing management of a refractory circulatory death donor is a new procedure which forms an integral part of patient care. It comprises technical and organisational aspects, and requires a conceptual, ethical and deontological effort. Copyright © 2016. Published by Elsevier Masson SAS.

  7. Clinical outcomes of intravenous immunoglobulin therapy in refractory uveitis.

    Science.gov (United States)

    Garcia-Geremias, M; Carreño, E; Epps, S J; Lee, R W J; Dick, A D

    2015-04-01

    Intravenous immunoglobulin (IVIg) therapy has multiple mechanisms of immunomodulatory action. We wished therefore to assess its efficacy in a spectrum of patients with refractory uveitis. Retrospective review of clinical charts was conducted to document response to IVIg treatment in consecutive patients with treatment-refractory uveitis. Main outcome measures were control of intraocular inflammation, visual acuity, progression of the disease, and complications. Four (two male) patients, with a mean age at the beginning of the treatment of 47 years (range: 39-64), were included in the study. Indication for treatment was patients with active non-infectious uveitis refractory to steroids and immunomodulatory therapy. All patients received a course of 0.5 g/kg per day of IVIg for three consecutive days, repeating this course at a mean of 11 week (range: 2-39 weeks) intervals when indicated clinically. The median duration of the IVIg therapy was 7 months (range: 3-14 months). In three patients treatment resulted in stabilisation and prevention of progression of the disease, and additionally in two patients it facilitated a decrease in prednisolone dose. Treatment failed to induce long-term remission in one patient with recurrence of macular oedema. IVIg was well tolerated with neither immediate nor longer-term adverse events observed. In three out of four cases IVIg was an effective adjunctive therapy and well tolerated for the management of treatment-refractory uveitis.

  8. Refractory compounds for repairing coke-oven brickwork

    Energy Technology Data Exchange (ETDEWEB)

    Hanganu, M.; Dragomir, C. (and others)

    1984-01-01

    A number of refractory compounds are presented, based on aluminium phosphate, phosphoric acid, sodium silicate and fire-clay and mullitic zirconium mastic, including their composition, properties and application (by impregnation, spray application or pouring), which are suitable for repairing various types of coke-oven brickwork. The results obtained are given.

  9. Evaluation of nutritional status in children with refractory epilepsy

    Directory of Open Access Journals (Sweden)

    Testolin G

    2006-04-01

    Full Text Available Abstract Background children affected by refractory epilepsy could be at risk of malnutrition because of feeding difficulties (anorexia, chewing, swallowing difficulties or vomiting and chronic use of anticonvulsants, which may affect food intake and energy metabolism. Moreover, their energy requirement may be changed as their disabilities would impede normal daily activities. The aim of the present study was to evaluate nutritional status, energy metabolism and food intake in children with refractory epilepsy. Methods 17 children with refractory epilepsy (13 boys and 4 girls; mean age 9 ± 3,2 years; Body Mass Index 15,7 ± 3,6 underwent an anthropometric assessment, body composition evaluation by dual-energy X-ray absorptiometry, detailed dietetic survey and measurement of resting energy expenditure by indirect calorimetry. Weight-for-age, height-for-age (stunting and weight-for-height (wasting were estimated compared to those of a reference population of the same age. Results 40% of children were malnourished and 24% were wasted. The nutritional status was worse in the more disabled children. Dietary intake resulted unbalanced (18%, 39%, 43% of total daily energy intake derived respectively from protein, lipid and carbohydrate. Adequacy index [nutrient daily intake/recommended allowance (RDA × 100] was Conclusion many children with refractory epilepsy would benefit from individual nutritional assessment and management as part of their overall care.

  10. Issues Impacting Refractory Service Life in Biomass/Waste Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, J.P.; Kwong, K.-S.; Powell, C.A.

    2007-03-01

    Different carbon sources are used, or are being considered, as feedstock for gasifiers; including natural gas, coal, petroleum coke, and biomass. Biomass has been used with limited success because of issues such as ash impurity interactions with the refractory liner, which will be discussed in this paper.

  11. Immunomodulatory therapy in refractory/recurrent ovarian cancer

    Directory of Open Access Journals (Sweden)

    Chao-Yu Chen

    2015-04-01

    Conclusion: IMT alone or add-on to palliative/salvage chemotherapy for refractory/recurrent EOC achieves a substantial disease stabilizing rate without severe toxicity, which might be a potential option in selected patients. The ALC 1 month after IMT could be an early indicator to disease stabilization.

  12. Productivity costs in patients with refractory chronic rhinosinusitis.

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L; Schlosser, Rodney J; Hwang, Peter H; Mace, Jess C; Soler, Zachary M

    2014-09-01

    Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Prospective, multi-institutional, observational cohort study. The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 U.S. National Census and the 2013 U.S. Department of Labor statistics. A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism were 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r = 0.440; p = 0.001). Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

  13. Role of rectal myomectomy in refractory chronic constipation ...

    African Journals Online (AJOL)

    Background: To assess the role of diagnostic and therapeutic value of anorectal myectomy in cases of chronic refractory constipation. Materials and Methods: Twenty-eight patients 11 months to 9 years of age presenting with chronic constipation, with contrast enema showing dilated rectum and sigmoid colon were included ...

  14. Stimulus intensity and the psychological refractory period II auditive stimuli

    NARCIS (Netherlands)

    Koster, W.G.; Schuur, van R.

    1970-01-01

    In experiments in which stimuli are presented closely spaced in time, subjects exhibit a limitation in the transmission of the signals. The result is either a delayed response or a less accurate response. This phenomenon has been called the psychological refractory phase (Telford, 1931). It is

  15. Brentuximab Vedotin Treatment for Primary Refractory Hodgkin Lymphoma

    Directory of Open Access Journals (Sweden)

    Hung-Bo Wu

    2013-01-01

    Full Text Available Up to 40% of patients with advanced Hodgkin lymphoma (HL become refractory or relapsed after current standard chemotherapy, among which primary refractory HL confers a particularly poor outcome. With intensive salvage chemotherapy and autologous stem cell transplantation, the long-term remission rate for these patients was only 30%, but more selective treatments with higher therapeutic index are needed. We report the experience of using a new anti-CD30 immunotoxin, brentuximab vedotin, in salvage treatment of a 30-year-old woman with primary refractory Hodgkin lymphoma. The patient presented with SVC syndrome due to the bulky mediastinal tumor and was confirmed to have classical Hodgkin lymphoma, nodular sclerosis type, stage IIIA. The tumor responded to induction chemotherapy transiently, but local progression was noted during subsequent cycles of treatment. Salvage radiotherapy to the mediastinal tumor, obtained no remission but was followed by rapid in-field progression and then lung metastasis. She declined stem cell transplantation and received salvage brentuximab vedotin (BV therapy, which induced dramatic shrinkage of tumor without significant side effects. Serial followup of PET/CT imaging confirmed a rapid and continuous complete remission for 12 months. Although durability of the remission needs further observation, this case illustrates the excellent efficacy of brentuximab vedotin in primary refractory Hodgkin lymphoma.

  16. USE OF STRUCTURAL MRI IN PATIENTS WITH MEDICALLY REFRACTORY SEIZURES

    Directory of Open Access Journals (Sweden)

    Ara G. Kaprelyan

    2012-12-01

    Full Text Available Introduction: Refractory epilepsy is common in patients with structural brain lesions including acquired disorders and genetic abnormalities. Recently, MRI is a precise diagnostic tool for recognition of different structural causes underlying medically intractable seizures.Objective: To evaluate the usefulness of MRI for detection of brain lesions associated with refractory epilepsy.Material and methods: 49 patients (20M and 29F; aged 48.6±24.7 years with refractory epilepsy were included in the study. They presented with partial (46.0%, secondary (31.0% or primary (23.0% generalized tonic-clonic seizures. Clinical diagnosis was based on the revised criteria of ILAE. Structural neuroimaging (MRI, EEG recording, and neurological examination were performed.Results: MRI detected different structural brain abnormalities totally in 36 (73.5% patients, including cerebral tumors (21p, cerebrovascular accidents (5p, hyppocampal sclerosis (3p, developmental malformations (2p, postencephalitic lesions (2p, arachnoid cysts (2p, and tuberous sclerosis (1p. Neuroimaging revealed normal findings in 13 (27.5% cases. EEG recordings showed focal epileptic activity in 38 (77.6% patients, including 33 cases with and 5 without structural brain abnormalities.Conclusion: This study revealed that structural brain lesions are commonly associated with refractory epilepsy. We suggested that MRI is a useful diagnostic method for assessment of patients with uncontrolled seizures or altered epileptic pattern.

  17. Penetration and Effectiveness of Micronized Copper in Refractory Wood Species.

    Science.gov (United States)

    Civardi, Chiara; Van den Bulcke, Jan; Schubert, Mark; Michel, Elisabeth; Butron, Maria Isabel; Boone, Matthieu N; Dierick, Manuel; Van Acker, Joris; Wick, Peter; Schwarze, Francis W M R

    2016-01-01

    The North American wood decking market mostly relies on easily treatable Southern yellow pine (SYP), which is being impregnated with micronized copper (MC) wood preservatives since 2006. These formulations are composed of copper (Cu) carbonate particles (CuCO3·Cu(OH)2), with sizes ranging from 1 nm to 250 μm, according to manufacturers. MC-treated SYP wood is protected against decay by solubilized Cu2+ ions and unreacted CuCO3·Cu(OH)2 particles that successively release Cu2+ ions (reservoir effect). The wood species used for the European wood decking market differ from the North American SYP. One of the most common species is Norway spruce wood, which is poorly treatable i.e. refractory due to the anatomical properties, like pore size and structure, and chemical composition, like pit membrane components or presence of wood extractives. Therefore, MC formulations may not suitable for refractory wood species common in the European market, despite their good performance in SYP. We evaluated the penetration effectiveness of MC azole (MCA) in easily treatable Scots pine and in refractory Norway spruce wood. We assessed the effectiveness against the Cu-tolerant wood-destroying fungus Rhodonia placenta. Our findings show that MCA cannot easily penetrate refractory wood species and could not confirm the presence of a reservoir effect.

  18. Refractory primary immune thrombocytopenia with subsequent del(5q) MDS

    DEFF Research Database (Denmark)

    Bech Mortensen, Thomas; Frederiksen, Henrik; Marcher, Claus Werenberg

    2017-01-01

    A patient with refractory primary immune thrombocytopenia (ITP) characterised by severe skin and mucosal bleedings was treated with several ITP-directed therapies including cyclophosphamide. He later developed therapy-related del(5q) myelodysplastic syndrome with no dysplastic morphological featu...

  19. Use of sedation to relieve refractory symptoms in dying patients ...

    African Journals Online (AJOL)

    Indications. Agitated delirium was the most common reason (45%) for using sedation, followed by intractable vomiting due to inoperable malignant intestinal obstruction in 25% of patients. Three patients with persistent convulsions or myoclonic jerking and 2 patients with severe refractory dyspnoea required some sedation.

  20. Aborted and refractory status epilepticus in children : A comparative analysis

    NARCIS (Netherlands)

    Lambrechtsen, Florise A. C. P.; Buchhalter, Jeffrey R.

    Purpose: The aims of this retrospective study were: (1) to compare the demographics, clinical characteristics, etiology, and EEG findings of status epilepticus aborted with medication (ASE) and refractory status epilepticus (RSE), (2) to describe the treatment response of status epilepticus (SE),

  1. Slides with no attached paper

    International Nuclear Information System (INIS)

    Warin, Dominique; Wallenius, Janne; Ouzounian, Gerald; Wikberg, Peter; Todd, Terry A.; Kormilitsyn, Mikhael V.; Osipenko, Alexander G.; Mayorshin, A.A.; McLachlan, Fiona; Nash, Ken L.; Nilsson, M.; Grimes, T.; Braley, J.C.; TAKESHITA, Kenji; Babain, Vasiliy A.; Spendlikova, I.; Distler, P.; John, J.; Sebesta, F.; VU, Trong-Hung; SIMONIN, Jean-Pierre; PAULENOVA, Alena; PRECEK, Martin; HARTIG, Kyle; KNAPP, Nathan; Vidick, Geoffrey; Bouslimani, Nouri; Desreux, Jean F.; Lewis, F.W.; Hudson, M.J.; Harwood, L.M.; Nunez, Ana; Nagarajan, K.; Vasudeva Rao, P.R.; Raj, Baldev; Ignatiev, Victor; Surenkov, Alexander; Pouchon, Manuel A.; Skarnemark, Gunnar; Allard, Stefan; Ekberg, Christian; Retegan, Teodora; Nordlund, Anders; John, Jan; Maershin, Alexander; Zakirov, R.; Panov, A.; Toropov, Andrey

    2010-01-01

    This document brings together the different presentations (slides) given at the workshop but with no attached paper. These slides refer to the following presentations: - Presentation of ITN (Instituto Tecnologico e Nuclear); - Minor Actinide Partitioning (Dominique Warin); - Transmutation (Janne Wallenius); - Radioactive Waste Management, IGD-TP (Gerald Ouzounian); - Present status of the Swedish nuclear waste management programme (Peter Wikberg); - The U.S. Fuel Cycle Research and Development Program - Separations Research and Development (Terry Todd); - Strategies and national programs of closed fuel cycles - Russian Expert Vision (Mikhael Kormilitsyn) - Extraction Studies Of Potential Solvent Formulations For The GANEX Process (Fiona MacLachlan); - Investigations of The Fundamental Chemistry of the TALSPEAK Process (Ken Nash); - Extraction Separation of Trivalent Minor Actinides and Lanthanides by Hexa-dentate Nitrogen-donor Extractant, TPEN, and its Analogs (Kenji Takeshita); - Fluorinated Diluents for HLW Processing - technological point of view (Vasiliy Babain); - Extraction properties of some new pyridine molecules and search for better diluents (Irena Spendlikova); - Kinetics of extraction of Eu 3+ ion by TODGA and CyMe 4 -BTBP studied using the RMC technique (Trong Hung Vu); - Redox Chemistry of Neptunium in Solutions of Nitric Acid (Alena Paulenova); - NMR applied to actinide ions and their complexes. In search of covalency effects (Geoffrey Vidick); - Towards 'Stability Rules' for Radiolysis of bis-DGA compounds (Ana Nunez); - Pyroprocess Research Activities at IGCAR, Kalpakkam, India (K. Nagarajan); - Critical issues of nuclear energy systems employing molten salt fluorides: from ISTC No. 1606 to No. 3749 (1. year of project activity) and MARS/EVOL cooperation (Victor Ignatiev); - Conversion processes: Internal Gelation and the Sphere-pac concept (Manuel Pouchon); - A Combined Nuclear Technology and Nuclear Chemistry Master. A Unique

  2. Transient refractory material dissolution by a volumetrically-heated melt

    Energy Technology Data Exchange (ETDEWEB)

    Seiler, Jean Marie, E-mail: jean-marie.seiler@cea.fr [CEA, DEN, DTN, 17 Rue des Martyrs, 38054 Grenoble Cedex 9 (France); Ratel, Gilles [CEA, DEN, DTN, 17 Rue des Martyrs, 38054 Grenoble Cedex 9 (France); Combeau, Hervé [Institut Jean Lamour, UMR 7198, Lorraine University, Ecole des Mines de Nancy, Parc de Saurupt, 54042 Nancy Cedex (France); Gaus-Liu, Xiaoyang; Kretzschmar, Frank; Miassoedov, Alexei [Karlsruhe Institut of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2014-12-15

    Highlights: • We describe a test investigating ceramic dissolution by a molten non-eutectic melt. • The evolution of the interface temperature between melt and refractory is measured. • A theoretical model describing dissolution kinetics is proposed. • When dissolution stops, interface temperature is the liquidus temperature of the melt. - Abstract: The present work addresses the question of corium–ceramic interaction in a core catcher during a core-melt accident in a nuclear power plant. It provides an original insight into transient aspects concerning dissolution of refractory material by a volumetrically heated pool. An experiment with simulant material (LIVECERAM) is presented. Test results clearly show that dissolution of solid refractory material can occur in a non-eutectic melt at a temperature which is lower than the melting temperature of the refractory material. During the dissolution transient, the interface temperature rises above the liquidus temperature, corresponding to the instantaneous average composition of the melt pool. With constant power dissipation in the melt and external cooling of the core-catcher, a final steady-state situation is reached. Dissolution stops when the heat flux (delivered by the melt to the refractory) can be removed by conduction through the residual thickness of the ceramic, with T{sub interface} = T{sub liquidus} (calculated for the average composition of the final liquid pool). The final steady state corresponds to a uniform pool composition and uniform interface temperature distribution. Convection in the pool is governed by natural thermal convection and the heat flux distribution is therefore similar to what would be obtained for a single component pool. An interpretation of the experiment with two model-based approaches (0D and 1D) is presented. The mass transfer kinetics between the interface and the bulk is controlled by a diffusion sublayer within the boundary layer. During the dissolution transient

  3. Platelet gel biotechnology applied to regenerative surgery of intrabony defects in patients with refractory generalized aggressive peridontitis. Case report.

    Science.gov (United States)

    Mauro, S; Orlando, L; Panzoni, R; Orlando, P F

    2003-01-01

    Platelet gel biotechnology, a method which has all the components of "tissue engineering" techniques, potentiates the already known healing process of guided tissue regeneration procedures (GTR) by multiplying the number of molecules that activate the healing response and by grafting in the host site various cell types, among which stem cells. Here are reported cases of patients affected by refractory generalized aggressive periodontitis treated with the association GTR and platelet gel biotechnology to verify if the contribution of the gel would produce superior results than those obtained by surgery alone which had been previously applied to the same sites with negative results. Three patients in therapy from 4 to 11 years, already subjected to surgery (GTR) and antibiotic therapy, were reoperated with the adjunct of autologous platelet gel. At a distance of 15.2 months (range 11-17 months) the operated sites showed a reduction in probing pocket depth of 3.4 mm (range 2.8-4.8 mm) and a gain in clinical attachment level of 3.1 mm (range 3-3.5 mm). The association of platelet gel biotechnology with GTR in the surgical treatment of intrabony defects of refractory generalized aggressive periodontitis patients seems to produce results similar to those reported for patients with chronic adult periodontitis. The observations at 15.2 months indicate that there is a stability over time of the results in those sites where previous surgical therapy had shown relapse.

  4. The fourth pattern of attachment: Disorganized / disoriented

    Directory of Open Access Journals (Sweden)

    Zlatka Cugmas

    2003-09-01

    Full Text Available On the basis of the study of recent scientific literature about the development of attachment behavior, the author answers the following questions about: the behavior children categorized as Disorganized/disorientated or Controlling in the procedure of the Strange situation; the life circumstances, in which these children live; the reasons for lack of balanced strategies of attachment and characteristics of their general manner of adaptation. The author finds the characteristics of the mothers' (insensitivity to be significantly influential for the emergence of the fourth pattern of attachment. These children are heterogeneous regarding adaptation in general. Professional help preceding negative consequences for their socioemotional development is neccesary.

  5. Nuclear reactor fuel rod attachment system

    International Nuclear Information System (INIS)

    Christiansen, D.W.

    1983-01-01

    The invention involves a technique to quickly, inexpensively and rigidly attach a nuclear reactor fuel rod to a support member. The invention also allows for the repeated non-destructive removal and replacement of the fuel rod. The proposed fuel rod and support member attachment and removal system consists of a locking cap fastened to the fuel rod and a locking strip fastened to the support member or vice versa. The locking cap has two or more opposing fingers shaped to form a socket. The fingers spring back when moved apart and released. The locking strip has an extension shaped to rigidly attach to the socket's body portion

  6. Illness identity in young adults with refractory epilepsy.

    Science.gov (United States)

    Luyckx, Koen; Oris, Leen; Raymaekers, Koen; Rassart, Jessica; Moons, Philip; Verdyck, Ludo; Mijnster, Teus; Mark, Ruth E

    2018-03-01

    Refractory epilepsy is an intrusive condition with important implications for daily functioning in emerging and young adulthood. The present study examined the degree to which refractory epilepsy is integrated in one's identity, and examined how such a sense of illness identity was related to health-related quality of life (HRQOL). A total of 121 18- to 40-year-old patients with refractory epilepsy (56.2% women) completed self-report questionnaires assessing the four illness identity states of acceptance, enrichment, engulfment, and rejection (Illness Identity Questionnaire (IIQ)); HRQOL (Quality of Life in Epilepsy Inventory - 31); and seizure frequency and severity (Liverpool Seizure Severity Scale (LSSS)). Illness identity scores were compared with a sample of 191 patients with a nonneurological chronic disease (congenital heart disease). Hierarchical regression analyses were conducted to assess the predictive value of illness identity for HRQOL when simultaneously controlling for demographic and clinical features. Patients with refractory epilepsy scored higher on rejection and engulfment and lower on acceptance when compared with patients with congenital heart disease. Further, seizure severity and number of medication side-effects were positively related to engulfment and negatively to acceptance. Finally, when simultaneously controlling for various demographic and clinical variables, illness identity significantly predicted HRQOL (with engulfment being the strongest and most consistent predictor). The extent to which patients with refractory epilepsy succeed in integrating their illness into their identity may have important implications for HRQOL. Clinicians should be especially attentive for signs that patients feel engulfed by their epilepsy. Copyright © 2018 Elsevier Inc. All rights reserved.

  7. Immunomodulatory therapy in refractory/recurrent ovarian cancer.

    Science.gov (United States)

    Chen, Chao-Yu; Lai, Chyong-Huey; Yang, Lan-Yan; Tang, Yun-Hsin; Chou, Hung-Hsueh; Chang, Chee-Jen; Lin, Cheng-Tao

    2015-04-01

    To investigate the efficacy and toxicity of immunomodulatory therapy (IMT) alone or as an add-on to palliative/salvage chemotherapy in patients with refractory/recurrent epithelial ovarian cancer (EOC). We retrospectively analyzed the efficacy and toxicity of IMT in 15 patients with refractory/recurrent EOC who had previously received multiple chemotherapy regimens. The median age of the patients was 56 years (range, 41-75 years). Three patients were platinum-sensitive, two were platinum-resistant, and the remaining 10 patients were refractory to platinum-based front-line chemotherapy. IMT consisted of picibanil (OK-432) on Day 1, interleukin-2 and/or interferon-α on Day 2 administered by subcutaneous injection (every week or 2-weekly). Five patients never received metronomic oral cyclophosphamide. After IMT, three patients achieved partial remission (PR, lasting for 11 months, ≥ 12 months, and 16 months), and six patients had stable disease (SD). The disease stabilizing rate (PR+SD) was 60% (3/3 in platinum-sensitive and 6/12 in platinum-resistant/refractory patients). The absolute lymphocyte count (ALC) at 1 month after IMT was significantly higher in the PR+SD group (median 1242.0/μL) than in the progression group (median 325.0/μL) (p = 0.012). No ≥ Grade 3 toxicities were observed. The median post-IMT survival time was 12 months (range, 2-39 months). IMT alone or add-on to palliative/salvage chemotherapy for refractory/recurrent EOC achieves a substantial disease stabilizing rate without severe toxicity, which might be a potential option in selected patients. The ALC 1 month after IMT could be an early indicator to disease stabilization. Copyright © 2015. Published by Elsevier B.V.

  8. Ixabepilone: a new chemotherapeutic option for refractory metastatic breast cancer

    Directory of Open Access Journals (Sweden)

    Shannon Puhalla

    2008-09-01

    Full Text Available Shannon Puhalla, Adam BrufskyUPMC Magee-Womens Cancer Program, University of Pittsburgh, Pittsburgh, Pennsylvania, USAAbstract: Taxane therapy is commonly used in the treatment of metastatic breast cancer. However, most patients will eventually become refractory to these agents. Ixabepilone is a newly approved chemotherapeutic agent for the treatment of metastatic breast cancer. Although it targets microtubules similarly to docetaxel and paclitaxel, ixabepilone has activity in patients that are refractory to taxanes. This review summarizes the pharmacology of ixapebilone and clinical trials with the drug both as a single agent and in combination. Data were obtained using searches of PubMed and abstracts of the annual meetings of the American Society of Clinical Oncology and the San Antonio Breast Cancer Symposium from 1995 to 2008. Ixapebilone is a semi-synthetic analog of epothilone B that acts to induce apoptosis of cancer cells via the stabilization of microtubules. Phase I clinical trials have employed various dosing schedules ranging from daily to weekly to 3-weekly. Dose-limiting toxicites included neuropathy and neutropenia. Responses were seen in a variety of tumor types. Phase II studies verified activity in taxane-refractory metastatic breast cancer. The FDA has approved ixabepilone for use as monotherapy and in combination with capecitabine for the treatment of metastatic breast cancer. Ixabepilone is an efficacious option for patients with refractory metastatic breast cancer. The safety profile is similar to that of taxanes, with neuropathy and neutropenia being dose-limiting. Studies are ongoing with the use of both iv and oral formulations and in combination with other chemotherapeutic and biologic agents.Keywords: ixabepilone, epothilone, metastatic breast cancer, taxane-refractory

  9. Vernakalant selectively prolongs atrial refractoriness with no effect on ventricular refractoriness or defibrillation threshold in pigs.

    Science.gov (United States)

    Bechard, Jeff; Gibson, John Ken; Killingsworth, Cheryl R; Wheeler, Jeffery J; Schneidkraut, Marlowe J; Huang, Jian; Ideker, Raymond E; McAfee, Donald A

    2011-03-01

    Vernakalant is a novel antiarrhythmic agent that has demonstrated clinical efficacy for the treatment of atrial fibrillation. Vernakalant blocks, to various degrees, cardiac sodium and potassium channels with a pattern that suggests atrial selectivity. We hypothesized, therefore, that vernakalant would affect atrial more than ventricular effective refractory period (ERP) and have little or no effect on ventricular defibrillation threshold (DFT). Atrial and ventricular ERP and ventricular DFT were determined before and after treatment with vernakalant or vehicle in 23 anesthetized male mixed-breed pigs. Vernakalant was infused at a rate designed to achieve stable plasma levels similar to those in human clinical trials. Atrial and ventricular ERP were determined by endocardial extrastimuli delivered to the right atria or right ventricle. Defibrillation was achieved using external biphasic shocks delivered through adhesive defibrillation patches placed on the thorax after 10 seconds of electrically induced ventricular fibrillation. The DFT was estimated using the Dixon "up-and-down" method. Vernakalant significantly increased atrial ERP compared with vehicle controls (34 ± 8 versus 9 ± 7 msec, respectively) without significantly affecting ventricular ERP or DFT. This is consistent with atrial selective actions and supports the conclusion that vernakalant does not alter the efficacy of electrical defibrillation.

  10. System and method for producing metallic iron

    Science.gov (United States)

    Englund, David J.; Schlichting, Mark; Meehan, John; Crouch, Jeremiah; Wilson, Logan

    2014-07-29

    A method of production of metallic iron nodules comprises assembling a hearth furnace having a moveable hearth comprising refractory material and having a conversion zone and a fusion zone, providing a hearth material layer comprising carbonaceous material on the refractory material, providing a layer of reducible material comprising and iron bearing material arranged in discrete portions over at least a portion of the hearth material layer, delivering oxygen gas into the hearth furnace to a ratio of at least 0.8:1 ponds of oxygen to pounds of iron in the reducible material to heat the conversion zone to a temperature sufficient to at least partially reduce the reducible material and to heat the fusion zone to a temperature sufficient to at least partially reduce the reducible material, and heating the reducible material to form one or more metallic iron nodules and slag.

  11. Refractiry metal monocrystals in high temperature thermometry

    International Nuclear Information System (INIS)

    Kuritnyk, I.P.

    1988-01-01

    The regularities of changes in thermoelectric properties of refractory metals in a wide temperature range (300-2300 K) depending on their structural state and impurities, are generalized. It is found that the main reasons for changes in thermo-e.m.f. of refractory metals during their operation in various media are diffusion processes and local microvoltages appearing in nonhomogeneous thermoelectrodes. It is shown that microstructure formation and control of impurities in thermometric materials permit to improve considerably the metrologic parameters of thermal transformers. Tungsten and molybdenum with monocrystalline structure with their high stability of properties, easy to manufacture and opening new possibilities in high-temperature contact measurement are used in thermometry for the first time

  12. Application of the model of micro inhomogeneous structure of liquid metals to calculation of their viscosity

    International Nuclear Information System (INIS)

    Gavrilin, I.V.; Ershov, G.S.

    1979-01-01

    A method was developed for calculating the dynamic viscosity coefficient of liquid metals based on the assumption of the microinhomogeneity of their structure. The functions eta=f(T) were calculated accordingly using computers both for the refractory (Fe, Ni, Co, Cu) and the readily melting (Al, An, Cd) metals. The experimental and the calculated values eta=f(T) agreed satisfactorily

  13. [The interpretation of attachment in the Szondi test and in the questionnaire processes of attachment theory].

    Science.gov (United States)

    Török I, András; Vincze, Gábor

    2011-01-01

    [corrected] The Szondi-test is widely applied in clinical diagnostics in Hungary too, and the evidence resulting from the theory is that we can get information about attachment during its interpreting. Its validity is proven by empirical research and clinical experiences. By analyzing the modern attachment theory more thoroughly, it becomes clear in what ways the Szondi-test constellations regarding attachment are different from the classificationbased on questionnaires, allowing the discrete measurement of the attachment style. With the Szondi-test the classification to attachment style is more insecure, but if it is completed with exploration, it is more informative in vector C (vector of relation, attachment information), while short questionnaires make the classification to attachment style possible. In our empirical analysis we represent the integration of the above mentioned clinical and theoretical experiences. In the present analysis we compare the vector C and S constellation of the two-profile Szondi-test of 80 persons with the dimensions of ECR-R questionnaire and with Collins and Read's questionnaire classification regarding attachment style. The statistical results refer to the fact that there is a legitimacy to compare questionnaire processes allowing the discrete classification of attachment and the Szondi-test's information content regarding attachment. With applying the methods together, we get a unique, complementary section of the information relating to attachment. Comparing the two methods (projective and questionnaire) establishes the need of theoretical integration as well. We also make an attempt to explain Fraley's evolutionary non-adaptivity of avoidant attachment, in the case of whose presence adaptivity of early attachment, counterbalancing the exploration and security need, and providing closeness--farness loses its balance.

  14. Comparative evaluation of the locally manufactured low-alumina fireclay refractories

    International Nuclear Information System (INIS)

    Mohammad, D.; Ahmed, W.; Khan, M.I.

    2007-01-01

    Properties of domestically produced low-alumina refractories commonly known as medium duty fireclay refractories were studied and a comparative evaluation was performed. Refractory properties such as density, porosity, cold strength, reheat change and deformation at high-temperature were determined. Significant differences were discovered between these products sold as medium duty fireclay refractories. One brand marketed as medium duty refractory was found to be too inferior to be designated as medium duty firebrick. Absence of any standards and lack of awareness on the part of users of the various test methods appear to be the cause of this situation. (author)

  15. Evaluation of Alternative Refractory Materials for the Main Flame Deflectors at KSC Launch Complexes

    Science.gov (United States)

    Calle, Luz Marina; Trejo, David; Rutkowsky, Justin

    2006-01-01

    The deterioration of the refractory materials used to protect the KSC launch complex steel base structures from the high temperatures during launches results in frequent and costly repairs and safety hazards. KSC-SPEC-P-0012, Specification for Refractory Concrete, is ineffective in qualifying refractory materials. This study of the specification and of alternative refractory materials recommends a complete revision of the specification and further investigation of materials that were found to withstand the environment of the Solid Rocket Booster main flame deflector better than the refractory materials in current use in terms of compressive strength, tensile strength, modulus of rupture, shrinkage, and abrasion.

  16. Migration of TRU-containing slag into candidate refractories for waste management

    International Nuclear Information System (INIS)

    Seymour, W.C.

    1978-11-01

    Results of initial tests on transuranic migration into commercial refractories are reported. Five castable refractories and a plastic-bonded refractory were tested using the cup test method. Initial results indicate that castable materials will not survive conditions expected in the slagging pyrolysis unit; plastic refractories appear to have better performance. The major mechanism of migration into the tested refractories is pore penetration. Al 2 O 3 and Al 2 O 3 -Cr 2 O 3 phases appear resistant to chemical diffusion of transuranics. 2 figures, 16 tables

  17. Magnetically Attached Multifunction Maintenance Rover

    Science.gov (United States)

    Bar-Cohen, Yoseph; Joffe, Benjamin

    2005-01-01

    A versatile mobile telerobot, denoted the magnetically attached multifunction maintenance rover (MAGMER), has been proposed for use in the inspection and maintenance of the surfaces of ships, tanks containing petrochemicals, and other large ferromagnetic structures. As its name suggests, this robot would utilize magnetic attraction to adhere to a structure. As it moved along the surface of the structure, the MAGMER would perform tasks that could include close-up visual inspection by use of video cameras, various sensors, and/or removal of paint by water-jet blasting, laser heating, or induction heating. The water-jet nozzles would be mounted coaxially within compressed-air-powered venturi nozzles that would collect the paint debris dislodged by the jets. The MAGMER would be deployed, powered, and controlled from a truck, to which it would be connected by hoses for water, compressed air, and collection of debris and by cables for electric power and communication (see Figure 1). The operation of the MAGMER on a typical large structure would necessitate the use of long cables and hoses, which can be heavy. To reduce the load of the hoses and cables on the MAGMER and thereby ensure its ability to adhere to vertical and overhanging surfaces, the hoses and cables would be paid out through telescopic booms that would be parts of a MAGMER support system. The MAGMER would move by use of four motorized, steerable wheels, each of which would be mounted in an assembly that would include permanent magnets and four pole pieces (see Figure 2). The wheels would protrude from between the pole pieces by only about 3 mm, so that the gap between the pole pieces and the ferromagnetic surface would be just large enough to permit motion along the surface but not so large as to reduce the magnetic attraction excessively. In addition to the wheel assemblies, the MAGMER would include magnetic adherence enhancement fixtures, which would comprise arrays of permanent magnets and pole pieces

  18. Associations among Adult Attachment Presentations, Maternal Sensitivity, and Infant-Mother Attachment in a Sample of Adolescent Mothers.

    Science.gov (United States)

    Ward, Mary J.; Carlson, Elizabeth A.

    1995-01-01

    Associations among adolescent attachment organization, maternal sensitivity, and infant attachment organization were examined prospectively in 72 teenaged mother-infant dyads. Pregnant teenagers' attachment organizations predicted both sensitivity and infant-mother attachments. Associations between maternal sensitivity and infant attachment were…

  19. Mycoplasma genitalium attaches to human spermatozoa

    DEFF Research Database (Denmark)

    Svenstrup, Helle Friis; Fedder, Jens; Abraham-Peskir, Joanna

    2003-01-01

    BACKGROUND: Mycoplasma genitalium causes urogenital diseases in men and women and is presumed to be sexually transmitted. We wanted to investigate whether spermatozoa could serve as vectors for M.genitalium in order to cause upper genital diseases in women. METHODS: By use of Nomarski light...... microscopy and transmission X-ray microscopy, the attachment of M.genitalium to spermatozoa was studied. Semen was incubated in vitro with M.genitalium. Purified, motile spermatozoa were examined for attachment of M.genitalium by immunofluorescence microscopy. RESULTS: Mycoplasma genitalium was shown...... to adhere to the head, midpiece and tail of the spermatozoa. The spermatozoa became immotile when many M.genitalium were attached. However, the motile spermatozoa were demonstrated to carry M.genitalium and in this case the mycoplasmas were seen to attach mostly to the midpiece or neck region. Occasionally...

  20. Preferential attachment in evolutionary earthquake networks

    Science.gov (United States)

    Rezaei, Soghra; Moghaddasi, Hanieh; Darooneh, Amir Hossein

    2018-04-01

    Earthquakes as spatio-temporal complex systems have been recently studied using complex network theory. Seismic networks are dynamical networks due to addition of new seismic events over time leading to establishing new nodes and links to the network. Here we have constructed Iran and Italy seismic networks based on Hybrid Model and testified the preferential attachment hypothesis for the connection of new nodes which states that it is more probable for newly added nodes to join the highly connected nodes comparing to the less connected ones. We showed that the preferential attachment is present in the case of earthquakes network and the attachment rate has a linear relationship with node degree. We have also found the seismic passive points, the most probable points to be influenced by other seismic places, using their preferential attachment values.