WorldWideScience

Sample records for atomic displacements

  1. Atomic displacements in bcc dilute alloys

    Indian Academy of Sciences (India)

    Hitesh Sharma; S Prakash

    2007-04-01

    We present here a systematic investigation of the atomic displacements in bcc transition metal (TM) dilute alloys. We have calculated the atomic displacements in bcc (V, Cr, Fe, Nb, Mo, Ta and W) transition metals (TMs) due to 3d, 4d and 5d TMs at the substitutional site using the Kanzaki lattice static method. Wills and Harrison interatomic potential is used to calculate the atomic force constants, the dynamical matrix and the impurity-induced forces. We have thoroughly investigated the atomic displacements using impurities from 3d, 4d and 5d series in the same host metal and the same impurity in different hosts. We have observed a systematic pattern in the atomic displacements for Cr-, Fe-, Nb-, Mo-, Ta- and W-based dilute alloys. The atomic displacements are found to increase with increase in the number of d electrons for all alloys considered except for V dilute alloys. The 3d impurities are found to be more easily dissolved in the 3d host metals than 4d or 5d TMs whereas 4d and 5d impurities show more solubility in 4d and 5d TMs. In general, the relaxation energy calculation suggests that impurities may be easily solvable in 5d TM hosts when compared to 3d or 4d TMs.

  2. Atomic displacement energy in amorphous compounds

    Science.gov (United States)

    Sanditov, D. S.; Mashanov, A. A.

    2016-12-01

    Atomic displacement energy Δɛe in multicomponent sheet and lead-silicate glasses is calculated from the free activation energy of a viscous flow. The value of Δɛe is shown to remain constant in a rather wide range of temperatures in the glass transition region. Satisfactory agreement with calculations of Δɛe using the current formula incorporating the glass transition temperature and the fluctuation volume fraction frozen at this temperature is obtained. The validity of the above formula not only at the glass transition temperature but also in the temperature region adjacent to it is confirmed.

  3. Atomic displacements in ferroelectric trigonal and orthorhombic boracite structures

    Science.gov (United States)

    Dowty, Eric; Clark, J.R.

    1972-01-01

    New crystal-structure refinements of Pca21 boracite, Mg3ClB7O13, and R??{lunate}c ericaite, Fe2.4Mg0.6ClB7O13, show that some boron and oxygen atoms are involved in the 'ferro' transitions as well as the metal and halogen atoms. The atomic displacements associated with the polarity changes are as large as 0.6A??. ?? 1972.

  4. General mechanism for helium blistering involving displaced atom transport

    Energy Technology Data Exchange (ETDEWEB)

    McDonell, W.R.

    1979-01-01

    A mechanism developed to account for formation of vertically elongated blisters in high displacement environments produced by /sup 252/Cf alpha particles and fission fragments has been extended to formation of done-shaped blisters in the low displacement environments produced by simple helium ion beams. In this mechanism, transport of displaced atoms to relieve compressive stresses in the helium-implanted layer allows interconnections of small, subsurface bubbles to form the blister cavity. The same transport may cause thickening of the blister caps at low implantation energies. The transition from dome-shaped to vertically elongated blistering occurs between the 300 and 3000 displacements per helium atom produced by simple helium ions and /sup 252/Cf radiations respectively.

  5. Atomic displacements due to interstitial hydrogen in Cu and Pd

    Indian Academy of Sciences (India)

    Hitesh Sharma; S Prakash

    2007-08-01

    The density functional theory (DFT) is used to study the atomic interactions in transition metal-based interstitial alloys. The strain field is calculated in the discrete lattice model using Kanzaki method. The total energy and hence atomic forces between interstitial hydrogen and transition metal hosts are calculated using DFT. The norm-conserving pseudopotentials for H, Cu and Pd are generated self-consistently. The dynamical matrices are evaluated considering interaction up to first nearest neighbors whereas impurity-induced forces are calculated with M32H shell (where M = Cu and Pd). The atomic displacements produced by interstitial hydrogen at the octahedral site in Cu and Pd show displacements of 7.36% and 4.3% of the first nearest neighbors respectively. Both Cu and Pd lattices show lattice expansion due to the presence of hydrogen and the obtained average lattice expansion / = 0.177 for Cu and 0.145 for Pd.

  6. Atomic displacements in dilute alloys of Cr, Nb and Mo

    Indian Academy of Sciences (India)

    Hitesh Sharma; S Prakash

    2002-09-01

    Kanzaki lattice static method is used to calculate the atomic displacements due to substitutional impurities in 3d (Cr) and 4d (Nb, Mo) metals. Wills and Harrison interatomic potential is used to calculate dynamical matrix and the impurity-induced forces up to second nearest neighbors. The calculated atomic displacements for 3d, 4d and 5d impurities in Cr (V, Mn, Fe, Ni, Nb, Mo, Ta and W), Nb (V, Cr, Mn, Fe, Zr, Mo, Ta and W) and Mo (V, Cr, Mn, Fe, Zr, Nb, Ta and W) are tabulated up to 10 NN’s. The strain field due to 3d impurities is least in Cr metal while it is larger in Nb and Mo metals. For 4d and 5d impurities the strain is larger in Cr metal than in Nb and Mo hosts. Similar trend is found for relaxation energies also.

  7. Damage production in atomic displacement cascades in beryllium

    Directory of Open Access Journals (Sweden)

    V.A. Borodin

    2016-12-01

    Full Text Available The paper presents the results of a molecular dynamics simulation of cascade damage production in beryllium caused by self-ion recoils in the energy range of 0.5–3keV. It is demonstrated that point defects are produced in Be preferentially in well-separated subcascades generated by secondary and higher order recoils. A linear dependence of the point defect number on the primary recoil energy is obtained with the slope that corresponds to formal atom displacement energy of ∼21eV. Most of the damage is created as single defects and the relatively high part of created point defects (∼50% survives the correlated recombination following the ballistic cascade stage and becomes freely-migrating.

  8. Atomic displacements due to spin-spin repulsion in conjugated alternant hydrocarbons

    Science.gov (United States)

    Estrada, Ernesto; Benzi, Michele

    2013-05-01

    We develop a theoretical model to account for the spin-induced atomic displacements in conjugated alternant hydrocarbons. It appears to be responsible for an enlargement of the distance between pairs of atoms separated by two atoms and located at the end of linear polyenes. It also correlates very well with the bond dissociation enthalpies for the cleavage of the C-H bond as well as to the spin density at carbon atoms in both open and closed shell at graphene nanoflakes (GNFs). Finally, we have modified the Schrödinger equation to study the propagation of the spin-induced perturbations through the atoms of GNFs.

  9. Direct observation of depth-dependent atomic displacements associated with dislocations in gallium nitride.

    Science.gov (United States)

    Lozano, J G; Yang, H; Guerrero-Lebrero, M P; D'Alfonso, A J; Yasuhara, A; Okunishi, E; Zhang, S; Humphreys, C J; Allen, L J; Galindo, P L; Hirsch, P B; Nellist, P D

    2014-09-26

    We demonstrate that the aberration-corrected scanning transmission electron microscope has a sufficiently small depth of field to observe depth-dependent atomic displacements in a crystal. The depth-dependent displacements associated with the Eshelby twist of dislocations in GaN normal to the foil with a screw component of the Burgers vector are directly imaged. We show that these displacements are observed as a rotation of the lattice between images taken in a focal series. From the sense of the rotation, the sign of the screw component can be determined.

  10. Gamma induced atom displacements in LYSO and LuYAP crystals as used in medical imaging applications

    Energy Technology Data Exchange (ETDEWEB)

    Piñera, Ibrahin, E-mail: ipinera@ceaden.edu.cu [Centro de Aplicaciones Tecnológicas y Desarrollo Nuclear, CEADEN, 30 St. 502, Playa 11300, Havana (Cuba); Cruz, Carlos M.; Abreu, Yamiel; Leyva, Antonio [Centro de Aplicaciones Tecnológicas y Desarrollo Nuclear, CEADEN, 30 St. 502, Playa 11300, Havana (Cuba); Van Espen, Piet [University of Antwerp, CGB, Groenenborgerlaan 171, 2020 Antwerpen (Belgium); Díaz, Angelina; Cabal, Ana E. [Centro de Aplicaciones Tecnológicas y Desarrollo Nuclear, CEADEN, 30 St. 502, Playa 11300, Havana (Cuba); Van Remortel, Nick [University of Antwerp, CGB, Groenenborgerlaan 171, 2020 Antwerpen (Belgium)

    2015-08-01

    The radiation damage, in terms of atom displacements, induced by gamma irradiation in LYSO and LuYAP crystals is presented. {sup 44}Sc, {sup 22}Na and {sup 48}V are used as gamma sources for this study. The energy of gammas from the electron–positron annihilation processes (511 keV) is also included in the study. The atom displacements distributions inside each material are calculated following the Monte Carlo assisted Classical Method introduced by the authors. This procedure also allows to study the atom displacements in-depth distributions inside each crystal. The atom displacements damage in LYSO crystals is found to be higher than in LuYAP crystals, mainly provoked by the displacements of silicon and oxygen atoms. But the difference between atom displacements produced in LYSO and LuYAP decreases when more energetic sources are used. On the other hand, the correlation between the atom displacements and energy deposition in-depth distributions is excellent. The atom displacements to energy deposition ratio is found to increases with more energetic photon sources. LYSO crystals are then more liable to the atom displacements damage than LuYAP crystals.

  11. Diffuse scattering measurements of static atomic displacements in crystalline binary solid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Ice, G.E.; Sparks, C.J.; Jiang, X.; Robertson, L.

    1997-09-01

    Diffuse x-ray scattering from crystalline solid solutions is sensitive to both local chemical order and local bond distances. In short-range ordered alloys, fluctuations of chemistry and bond distances break the long-range symmetry of the crystal within a local region and contribute to the total energy of the alloy. Recent use of tunable synchrotron radiation to change the x-ray scattering contrast between elements has greatly advanced the measurement of bond distances between the three kinds of atom pairs found in crystalline binary alloys. The estimated standard deviation on these recovered static displacements approaches {+-}0.001 {angstrom} (0.0001 nm) which is an order of magnitude more precise than obtained with EXAFS. In addition, both the radial and tangential displacements can be recovered to five near neighbors and beyond. These static displacement measurements provide new information which challenges the most advanced theoretical models of binary crystalline alloys. 29 refs., 8 figs., 2 tabs.

  12. Quantification of surface displacements and electromechanical phenomena via dynamic atomic force microscopy

    Science.gov (United States)

    Balke, Nina; Jesse, Stephen; Yu, Pu; Carmichael, Ben; Kalinin, Sergei V.; Tselev, Alexander

    2016-10-01

    Detection of dynamic surface displacements associated with local changes in material strain provides access to a number of phenomena and material properties. Contact resonance-enhanced methods of atomic force microscopy (AFM) have been shown capable of detecting ˜1-3 pm-level surface displacements, an approach used in techniques such as piezoresponse force microscopy, atomic force acoustic microscopy, and ultrasonic force microscopy. Here, based on an analytical model of AFM cantilever vibrations, we demonstrate a guideline to quantify surface displacements with high accuracy by taking into account the cantilever shape at the first resonant contact mode, depending on the tip-sample contact stiffness. The approach has been experimentally verified and further developed for piezoresponse force microscopy (PFM) using well-defined ferroelectric materials. These results open up a way to accurate and precise measurements of surface displacement as well as piezoelectric constants at the pm-scale with nanometer spatial resolution and will allow avoiding erroneous data interpretations and measurement artifacts. This analysis is directly applicable to all cantilever-resonance-based scanning probe microscopy (SPM) techniques.

  13. Improved calculation of displacements per atom cross section in solids by gamma and electron irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Piñera, Ibrahin, E-mail: ipinera@ceaden.edu.cu [Centro de Aplicaciones Tecnológicas y Desarrollo Nuclear, CEADEN, 30 St. 502, Playa 11300, Havana (Cuba); Cruz, Carlos M.; Leyva, Antonio; Abreu, Yamiel; Cabal, Ana E. [Centro de Aplicaciones Tecnológicas y Desarrollo Nuclear, CEADEN, 30 St. 502, Playa 11300, Havana (Cuba); Espen, Piet Van; Remortel, Nick Van [University of Antwerp, CGB, Groenenborgerlaan 171, 2020 Antwerpen (Belgium)

    2014-11-15

    Highlights: • We present a calculation procedure for dpa cross section in solids under irradiation. • Improvement about 10–90% for the gamma irradiation induced dpa cross section. • Improvement about 5–50% for the electron irradiation induced dpa cross section. • More precise results (20–70%) for thin samples irradiated with electrons. - Abstract: Several authors had estimated the displacements per atom cross sections under different approximations and models, including most of the main gamma- and electron-material interaction processes. These previous works used numerical approximation formulas which are applicable for limited energy ranges. We proposed the Monte Carlo assisted Classical Method (MCCM), which relates the established theories about atom displacements to the electron and positron secondary fluence distributions calculated from the Monte Carlo simulation. In this study the MCCM procedure is adapted in order to estimate the displacements per atom cross sections for gamma and electron irradiation. The results obtained through this procedure are compared with previous theoretical calculations. An improvement in about 10–90% for the gamma irradiation induced dpa cross section is observed in our results on regard to the previous evaluations for the studied incident energies. On the other hand, the dpa cross section values produced by irradiation with electrons are improved by our calculations in about 5–50% when compared with the theoretical approximations. When thin samples are irradiated with electrons, more precise results are obtained through the MCCM (in about 20–70%) with respect to the previous studies.

  14. Estimated H-atom anisotropic displacement parameters: a comparison between different methods and with neutron diffraction results

    DEFF Research Database (Denmark)

    Munshi, Parthapratim; Madsen, Anders Ø; Spackman, Mark A;

    2008-01-01

    Anisotropic displacement parameters (ADPs) are compared for H atoms estimated using three recently described procedures, both among themselves and with neutron diffraction results. The results convincingly demonstrate that all methods are capable of giving excellent results for several benchmark...

  15. Temperature dependent local atomic displacements in ammonia intercalated iron selenide superconductor.

    Science.gov (United States)

    Paris, E; Simonelli, L; Wakita, T; Marini, C; Lee, J-H; Olszewski, W; Terashima, K; Kakuto, T; Nishimoto, N; Kimura, T; Kudo, K; Kambe, T; Nohara, M; Yokoya, T; Saini, N L

    2016-01-01

    Recently, ammonia-thermal reaction has been used for molecular intercalation in layered FeSe, resulting a new Lix(NH3)yFe2Se2 superconductor with Tc ~ 45 K. Here, we have used temperature dependent extended x-ray absorption fine structure (EXAFS) to investigate local atomic displacements in single crystals of this new superconductor. Using polarized EXAFS at Fe K-edge we have obtained direct information on the local Fe-Se and Fe-Fe bondlengths and corresponding mean square relative displacements (MSRD). We find that the Se-height in the intercalated system is lower than the one in the binary FeSe, suggesting compressed FeSe4 tetrahedron in the title system. Incidentally, there is hardly any effect of the intercalation on the bondlengths characteristics, revealed by the Einstein temperatures, that are similar to those found in the binary FeSe. Therefore, the molecular intercalation induces an effective compression and decouples the FeSe slabs. Furthermore, the results reveal an anomalous change in the atomic correlations across Tc, appearing as a clear decrease in the MSRD, indicating hardening of the local lattice mode. Similar response of the local lattice has been found in other families of superconductors, e.g., A15-type and cuprates superconductors. This observation suggests that local atomic correlations should have some direct correlation with the superconductivity.

  16. Temperature dependent local atomic displacements in ammonia intercalated iron selenide superconductor

    Science.gov (United States)

    Paris, E.; Simonelli, L.; Wakita, T.; Marini, C.; Lee, J.-H.; Olszewski, W.; Terashima, K.; Kakuto, T.; Nishimoto, N.; Kimura, T.; Kudo, K.; Kambe, T.; Nohara, M.; Yokoya, T.; Saini, N. L.

    2016-01-01

    Recently, ammonia-thermal reaction has been used for molecular intercalation in layered FeSe, resulting a new Lix(NH3)yFe2Se2 superconductor with Tc ~ 45 K. Here, we have used temperature dependent extended x-ray absorption fine structure (EXAFS) to investigate local atomic displacements in single crystals of this new superconductor. Using polarized EXAFS at Fe K-edge we have obtained direct information on the local Fe-Se and Fe-Fe bondlengths and corresponding mean square relative displacements (MSRD). We find that the Se-height in the intercalated system is lower than the one in the binary FeSe, suggesting compressed FeSe4 tetrahedron in the title system. Incidentally, there is hardly any effect of the intercalation on the bondlengths characteristics, revealed by the Einstein temperatures, that are similar to those found in the binary FeSe. Therefore, the molecular intercalation induces an effective compression and decouples the FeSe slabs. Furthermore, the results reveal an anomalous change in the atomic correlations across Tc, appearing as a clear decrease in the MSRD, indicating hardening of the local lattice mode. Similar response of the local lattice has been found in other families of superconductors, e.g., A15-type and cuprates superconductors. This observation suggests that local atomic correlations should have some direct correlation with the superconductivity. PMID:27276997

  17. Bandgap modulation in photoexcited topological insulator Bi2Te3 via atomic displacements

    Science.gov (United States)

    Hada, Masaki; Norimatsu, Katsura; Tanaka, Sei'ichi; Keskin, Sercan; Tsuruta, Tetsuya; Igarashi, Kyushiro; Ishikawa, Tadahiko; Kayanuma, Yosuke; Miller, R. J. Dwayne; Onda, Ken; Sasagawa, Takao; Koshihara, Shin-ya; Nakamura, Kazutaka G.

    2016-07-01

    The atomic and electronic dynamics in the topological insulator (TI) Bi2Te3 under strong photoexcitation were characterized with time-resolved electron diffraction and time-resolved mid-infrared spectroscopy. Three-dimensional TIs characterized as bulk insulators with an electronic conduction surface band have shown a variety of exotic responses in terms of electronic transport when observed under conditions of applied pressure, magnetic field, or circularly polarized light. However, the atomic motions and their correlation between electronic systems in TIs under strong photoexcitation have not been explored. The artificial and transient modification of the electronic structures in TIs via photoinduced atomic motions represents a novel mechanism for providing a comparable level of bandgap control. The results of time-domain crystallography indicate that photoexcitation induces two-step atomic motions: first bismuth and then tellurium center-symmetric displacements. These atomic motions in Bi2Te3 trigger 10% bulk bandgap narrowing, which is consistent with the time-resolved mid-infrared spectroscopy results.

  18. Defect production and atomic mixing by displacement cascades in Ni3Al

    Institute of Scientific and Technical Information of China (English)

    高飞; 王天民; A.F.Calder; D.J.Bacon

    1997-01-01

    Molecular dynamics simulations have been employed to investigate displacement cascades in Ni3Al, with energy Ep in the range from 0.15 to 10 keV. The efficiency of production of Frenkel pairs declines with the increasing cascade energy in a fashion similar to that found recently for pure metals. The antisite defects are much more numerous than the Frenkel pairs, and their production efficiency increases with the increasing cascade energy. A new empirical relationship between the defect number and damage energy is proposed, namely Ndefect = AEpm. A high proportion of the atomic mixing occurs in the ballistic phase and is larger for the Ni atoms, implying that the phenomenon is not purely a liquid-like process.

  19. Role of valence changes and nanoscale atomic displacements in BiS2-based superconductors.

    Science.gov (United States)

    Cheng, Jie; Zhai, Huifei; Wang, Yu; Xu, Wei; Liu, Shengli; Cao, Guanghan

    2016-11-22

    Superconductivity within layered crystal structures has attracted sustained interest among condensed matter community, primarily due to their exotic superconducting properties. EuBiS2F is a newly discovered member in the BiS2-based superconducting family, which shows superconductivity at 0.3 K without extrinsic doping. With 50 at.% Ce substitution for Eu, superconductivity is enhanced with Tc increased up to 2.2 K. However, the mechanisms for the Tc enhancement have not yet been elucidated. In this study, the Ce-doping effect on the self-electron-doped superconductor EuBiS2F was investigated by X-ray absorption spectroscopy (XAS). We have established a relationship between Ce-doping and the Tc enhancement in terms of Eu valence changes and nanoscale atomic displacements. The new finding sheds light on the interplay among superconductivity, charge and local structure in BiS2-based superconductors.

  20. Role of valence changes and nanoscale atomic displacements in BiS2-based superconductors

    Science.gov (United States)

    Cheng, Jie; Zhai, Huifei; Wang, Yu; Xu, Wei; Liu, Shengli; Cao, Guanghan

    2016-11-01

    Superconductivity within layered crystal structures has attracted sustained interest among condensed matter community, primarily due to their exotic superconducting properties. EuBiS2F is a newly discovered member in the BiS2-based superconducting family, which shows superconductivity at 0.3 K without extrinsic doping. With 50 at.% Ce substitution for Eu, superconductivity is enhanced with Tc increased up to 2.2 K. However, the mechanisms for the Tc enhancement have not yet been elucidated. In this study, the Ce-doping effect on the self-electron-doped superconductor EuBiS2F was investigated by X-ray absorption spectroscopy (XAS). We have established a relationship between Ce-doping and the Tc enhancement in terms of Eu valence changes and nanoscale atomic displacements. The new finding sheds light on the interplay among superconductivity, charge and local structure in BiS2-based superconductors.

  1. MD simulation of atomic displacement cascades in Fe-10 at.%Cr binary alloy

    Energy Technology Data Exchange (ETDEWEB)

    Tikhonchev, M., E-mail: tikhonchev@sv.ulsu.r [Ulyanovsk State University, Leo Tolstoy Str., 42, Ulyanovsk 432970 (Russian Federation); Joint Stock Company, ' State Scientific Center Research Institute of Atomic Reactors' , 433510 Dimitrovgrad-10 (Russian Federation); Svetukhin, V.; Kadochkin, A. [Ulyanovsk State University, Leo Tolstoy Str., 42, Ulyanovsk 432970 (Russian Federation); Gaganidze, E. [Forschungszentrum Karlsruhe, IMF II, 3640, D-76021 Karlsruhe (Germany)

    2009-12-15

    Molecular dynamics simulation of atomic displacement cascades up to 20 keV has been performed in Fe-10 at.%Cr binary alloy at a temperature of 600 K. The N-body interatomic potentials of Finnis-Sinclair type were used. According to the obtained results the dependence of 'surviving' defects amount is well approximated by power function that coincides with other researchers' results. Obtained cascade efficiency for damage energy in the range from 10 to 20 keV is approx0.2 NRT that is slightly higher than for pure alpha-Fe. In post-cascade area Cr fraction in interstitials is in range 2-5% that is essentially lower than Cr content in the base alloy. The results on size and amount of vacancy and interstitial clusters generated in displacement cascades are obtained. For energies of 2 keV and higher the defect cluster average size increases and it is well approximated by a linear dependence on cascade energy both for interstitials and vacancies.

  2. Nanoscale displacement of the image of an atomic source of radiation

    Institute of Scientific and Technical Information of China (English)

    Xin Li; Jie Shu; Henk F. Arnoldus

    2009-01-01

    Light emitted by an atomic source of radiation appears to travel along a straight line (ray) from the location of the source to the observer in the far field. However, when the energy flow pattern of the radiation is resolved with an accuracy better than an optical wavelength, it turns out that the field lines are usually curved. We consider electric dipole radiation, a prime example of which is the radiation emitted by an atom during an electronic transition, and we show that the field lines of energy flow are in general curves. Near the location of the dipole, the field lines exhibit a vortex structure, and in the far field they approach a straight line. The spatial extension of the vortex in the optical near field is of nanoscale dimension. Due to the rotation of the field lines near the source, the asymptotic limit of a field line is not exactly in the radially outward direction and as a consequence, the image in the far field is slightly shifted. This sub-wavelength displacement of the image of the source should be amenable to experimental observation with contemporary nanoscale-precision techniques.

  3. Separate determination of the amplitude of thermal vibrations and static atomic displacements in titanium carbide by neutron diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Khidirov, I., E-mail: khidirov@inp.uz; Parpiev, A. S. [Uzbekistan Academy of Sciences, Institute of Nuclear Physics (Uzbekistan)

    2011-05-15

    The amplitude of thermal (dynamic) atomic vibrations and meansquare static atomic displacements in titanium carbide TiC{sub x} (x = 0.97, 0.88, 0.70) have been separately determined by measuring neutron diffraction patterns at two temperatures (T{sub 1} = 300 K and T{sub 2} = 80 K). The static lattice distortions in stoichiometric titanium carbide are experimentally found to be negligible. In the TiC{sub x} homogeneity range, the amplitude {radical}u{sup 2}{sub dyn} of thermal atomic vibrations significantly increases with a decrease in the carbon concentration. The Debye temperature has been determined for the first time in the TiC{sub x} homogeneity range at both room and liquid-nitrogen temperatures.

  4. Charge-screening role of c -axis atomic displacements in YBa2Cu3O6 +x and related superconductors

    Science.gov (United States)

    Božin, E. S.; Huq, A.; Shen, Bing; Claus, H.; Kwok, W. K.; Tranquada, J. M.

    2016-02-01

    The importance of charge reservoir layers for supplying holes to the CuO2 planes of cuprate superconductors has long been recognized. Less attention has been paid to the screening of the charge transfer by the intervening ionic layers. We address this issue in the case of YBa2Cu3O6 +x , where CuO chains supply the holes for the planes. We present a simple dielectric-screening model that gives a linear correlation between the relative displacements of ions along the c axis, determined by neutron powder diffraction, and the hole density of the planes. Applying this model to the temperature-dependent shifts of ions along the c axis, we infer a charge transfer of 5-10% of the hole density from the planes to the chains on warming from the superconducting transition to room temperature. Given the significant coupling of c -axis displacements to the average charge density, we point out the relevance of local displacements for screening charge modulations and note recent evidence for dynamic screening of in-plane quasiparticles. This line of argument leads us to a simple model for atomic displacements and charge modulation that is consistent with images from scanning-tunneling microscopy for underdoped Bi2Sr2CaCu2O8 +δ .

  5. Atomic displacement free interfaces and atomic registry in SiO2/(1×1) Si(100)

    Science.gov (United States)

    Shaw, Justin M.; Herbots, N.; Hurst, Q. B.; Bradley, D.; Culbertson, R. J.; Atluri, V.; Queeney, K. T.

    2006-11-01

    We use ion beam analysis to probe the structure and interface of ultrathin thermal oxide films grown on (1×1) Si(100) surfaces prepared using the Herbots-Atluri [U.S. patent No. 6,613,677 (Sept. 2, 2003)] wet chemical clean. We discover that these oxide layers are structurally registered with the substrate lattice with no interfacial structural disorder. Registry of Si atoms is most pronounced along ⟨111⟩ directions relative to the Si substrate, consistent with a β-cristobalite epitaxial phase. This structurally registered phase transitions to an amorphous structure approximately 2nm from the interface.

  6. Selective spatial localization of the atom displacements in one-dimensional hybrid quasi-regular (Thue Morse and Rudin Shapiro)/periodic structures

    Science.gov (United States)

    Montalbán, A.; Velasco, V. R.; Tutor, J.; Fernández-Velicia, F. J.

    2007-06-01

    We have studied the vibrational frequencies and atom displacements of one-dimensional systems formed by combinations of Thue-Morse and Rudin-Shapiro quasi-regular stackings with periodic ones. The materials are described by nearest-neighbor force constants and the corresponding atom masses. These systems exhibit differences in the frequency spectrum as compared to the original simple quasi-regular generations and periodic structures. The most important feature is the presence of separate confinement of the atom displacements in one of the parts forming the total composite structure for different frequency ranges, thus acting as a kind of phononic cavity.

  7. Effects of a slow harmonic displacement on an Atomic Force Microscope system under Lennard-Jones forces

    Directory of Open Access Journals (Sweden)

    Khadraoui Morad

    2016-01-01

    Full Text Available We focus in this paper on the modeling and dynamical analysis of a tapping mode atomic force microscopy (AFM. The microbeam is subjected to a low frequency harmonic displacement of its base and to the Lennard-Jones (LJ forces at its free end. Static and modal analysis are performed for various gaps between the tip of the microbeam and a sample. The Galerkin method is employed to reduce the equations of motion to a fast-slow dynamical system. We show that the dynamics of the AFM system is governed by the contact and the noncontact invariant slow manifolds. The tapping mode is triggered via two saddle-node bifurcations of these manifolds. Moreover, the contact time is computed and the effects of the base motion amplitude and the initial gap are discussed.

  8. Measurement of transient atomic displacements in thin films with picosecond and femtometer resolution

    Directory of Open Access Journals (Sweden)

    M. Kozina

    2014-05-01

    Full Text Available We report measurements of the transient structural response of weakly photo-excited thin films of BiFeO3, Pb(Zr,TiO3, and Bi and time-scales for interfacial thermal transport. Utilizing picosecond x-ray diffraction at a 1.28 MHz repetition rate with time resolution extending down to 15 ps, transient changes in the diffraction angle are recorded. These changes are associated with photo-induced lattice strains within nanolayer thin films, resolved at the part-per-million level, corresponding to a shift in the scattering angle three orders of magnitude smaller than the rocking curve width and changes in the interlayer lattice spacing of fractions of a femtometer. The combination of high brightness, repetition rate, and stability of the synchrotron, in conjunction with high time resolution, represents a novel means to probe atomic-scale, near-equilibrium dynamics.

  9. MD simulation of atomic displacement cascades near chromium-rich clusters in FeCr alloy

    Energy Technology Data Exchange (ETDEWEB)

    Tikhonchev, M., E-mail: tikhonchev@sv.ulsu.ru [Ulyanovsk State University, Research Institute of Technology, 42 Leo Tolstoy St., 432970 Ulyanovsk (Russian Federation); Svetukhin, V. [Ulyanovsk State University, Research Institute of Technology, 42 Leo Tolstoy St., 432970 Ulyanovsk (Russian Federation); Gaganidze, E. [Karlsruhe Institute of Technology, Institute for Applied Materials, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Karlsruhe (Germany)

    2013-11-15

    The paper reports simulation of cascades in Fe–9 at.%Cr binary alloy containing chromium-rich clusters. The simulation is performed by the molecular dynamics method at the initial temperature of 300 K and primary knock-on atom energy of 15 and 20 keV. Spherical clusters containing 95 at.% of Cr with diameter of 1–5 nm have been considered. The properties of cascade evolution in the presence of chromium-rich cluster are studied. It is shown that these clusters tend to dissolve in collision cascades. However, clusters with diameter of ⩾3 nm exhibit only slight modifications and can be considered stable. Parameters of small (1–2 nm) clusters can change significantly and, in some cases, a 1 nm cluster can be totally dissolved.

  10. Estimating the activation energy of the displacement of Mg atoms in the channels of B25C4Mg1.42 crystals

    Science.gov (United States)

    Konovalikhin, S. V.; Ponomarev, V. I.

    2016-10-01

    The activation energy of displacement of Mg atoms through channels of B25C4Mg1.42 crystals is estimated using quantum chemical calculations (DFT (B3LYP potential), RHF, and UHF methods, 3-21G basis set) of the element of the structure modeling the channel and location of Mg atoms in it. The changes in the activation energy at the replacement of Mg atoms by Na and Li atoms were estimated. The greatest decreasing in the activation energy was detected for Li atoms. The obtained results can be regarded as a theoretical background for development of conducting systems based on B25C4Mg1.42 crystals.

  11. Atomic displacements in PbMg1/3Nb2/3O3 under high pressures

    Science.gov (United States)

    Rotaru, G.-M.; Gvasaliya, S. N.; Pomjakushin, V.; Roessli, B.; Strässle, Th; Lushnikov, S. G.; Shaplygina, T. A.; Günter, P.

    2008-03-01

    We have investigated the chemical structure of PbMg1/3Nb2/3O3 (PMN) relaxor ferroelectric at room temperature under hydrostatic pressures up to 8.37 GPa and at ambient pressure as a function of temperature. The refinement of the crystal structure shows that the amplitude of the displacements of the Pb ions from the (0 0 0) position decreases with increasing pressure. On the other hand, the thermal displacement parameters of Mg/Nb ions are almost insensitive to pressure. The decrease in the Pb displacements correlates with an increase in the anisotropy in the thermal displacement parameter of the O ions. These results are in agreement with those obtained in PbMg1/3Ta2/3O3 (PMT) and show further evidence that the Pb displacements play an important role in the relaxor behavior. The aim of this study is to clarify the microscopic origin for the anomalous pressure effects observed in relaxors as well as to provide new data for the understanding of this class of materials.

  12. Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This practice describes a standard procedure for characterizing neutron irradiations of iron (and low alloy steels) in terms of the exposure index displacements per atom (dpa) for iron. 1.2 Although the general procedures of this practice apply to any material for which a displacement cross section d(E) is known (see Practice E 521), this practice is written specifically for iron. 1.3 It is assumed that the displacement cross section for iron is an adequate approximation for calculating displacements in steels that are mostly iron (95 to 100 %) in radiation fields for which secondary damage processes are not important. 1.4 Procedures analogous to this one can be formulated for calculating dpa in charged particle irradiations. (See Practice E 521.) 1.5 The application of this practice requires knowledge of the total neutron fluence and flux spectrum. Refer to Practice E 521 for determining these quantities. 1.6 The correlation of radiation effects data is beyond the scope of this practice. This stand...

  13. A study of temperature dependent local atomic displacements in a Ba(Fe(1-x)Co(x))2As2 superconductor.

    Science.gov (United States)

    Hacisalihoglu, M Y; Paris, E; Joseph, B; Simonelli, L; Sato, T J; Mizokawa, T; Saini, N L

    2016-04-01

    We have studied the local structure of a Ba(Fe(1-x)Co(x))2As2 superconductor using temperature dependent extended X-ray absorption fine structure (EXAFS) measurements. Polarized EXAFS at the Fe K-edge on an optimally doped (x = 0.06) single crystal has permitted us to determine atomic displacements across the superconducting transition temperature (T(c)). The Fe-As bondlength hardly shows any change with temperature; however, the Fe-Fe sublattice reveals a sharp anomaly across T(c), indicated by a significant drop in mean square relative displacements, similar to the one known for cuprates and A15-type superconductors. We have also found a large atomic disorder around the substituted Co, revealed by polarized Co K-edge EXAFS measurements. The Co-Fe/Co bonds are more flexible than the Fe-Fe bonds with the As-height in Co-containing tetrahedra being larger than the one in FeAs4. The results suggest that the local Fe-Fe bondlength fluctuations and the atomic disorder in this sub-lattice should have some important role in the superconductivity of Ba(Fe(1-x)Co(x))2As2 pnictides.

  14. Atomic displacements effects on the electronic properties of Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}

    Energy Technology Data Exchange (ETDEWEB)

    Camargo M, J. A. [Fundacion Universitaria Internacional del Tropico Americano, Grupo de Investigacion en Ciencias Basicas, Aplicacion e Innovacion, Carrera 19 No. 39-40, Yopal, Yopal (Colombia); Espitia, D.; Baquero, R., E-mail: jcamargo@unitropico.edu.co [Instituto Politecnico Nacional, Centro de Investigacion y de Estudios Avanzados, Departamento de Fisica, Av. IPN 2508, 07360 Mexico D. F. (Mexico)

    2015-07-01

    The displacements effects of the oxygen atom associated to the Sr-plane (O3) in the electronic properties of Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} (Bi-2223), have been investigated using density functional theory. We determined intervals of the O3 atomic positions for which the band structure calculations show that the Bi-O bands, around the high symmetry point M in the irreducible Brillouin zone, emerge towards higher energies avoiding its contribution at Fermi level, as experimentally has been reported. This procedure does not introduce foreign doping elements into the calculation. Our calculations present a good agreement with the angle-resolved photoemission spectroscopy and nuclear magnetic resonance (NMR) experiments. The two options found differ in character (metallic or nonmetallic) of the Bi-O plane. The are not any experiments, to the best of our knowledge, which determine this character for Bi-2223. (Author)

  15. Displacement cross sections and PKA spectra: tables and applications. [Neutron damage energy cross sections to 20 MeV, primary knockon atom spectra to 15 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Doran, D G; Graves, N J

    1976-12-01

    Damage energy cross sections to 20 MeV are given for aluminum, vanadium, chromium, iron, nickel, copper, zirconium, niobium, molybdenum, tantalum, tungsten, lead, and 18Cr10Ni stainless steel. They are based on ENDF/B-IV nuclear data and the Lindhard energy partition model. Primary knockon atom (PKA) spectra are given for aluminum, iron, niobium, tantalum, and lead for neutron energies up to 15 MeV at approximately one-quarter lethargy intervals. The contributions of various reactions to both the displacement cross sections (taken to be proportional to the damage energy cross sections) and the PKA spectra are presented graphically. Spectral-averaged values of the displacement cross sections are given for several spectra, including approximate maps for the Experimental Breeder Reactor-II (EBR-II) and several positions in the Fast Test Reactor (FTR). Flux values are included to permit estimation of displacement rates. Graphs show integral PKA spectra for the five metals listed above for neutron spectra corresponding to locations in the EBR-II, the High Flux Isotope Reactor (HFIR), and a conceptual fusion reactor (UWMAK-I). Detailed calculations are given only for cases not previously documented. Uncertainty estimates are included.

  16. Atoms

    Institute of Scientific and Technical Information of China (English)

    刘洪毓

    2007-01-01

    Atoms(原子)are all around us.They are something like the bricks (砖块)of which everything is made. The size of an atom is very,very small.In just one grain of salt are held millions of atoms. Atoms are very important.The way one object acts depends on what

  17. Long term simulation of point defect cluster size distributions from atomic displacement cascades in Fe{sub 70}Cr{sub 20}Ni{sub 10}

    Energy Technology Data Exchange (ETDEWEB)

    Souidi, A., E-mail: aek_souidi@yahoo.fr [Université Dr. Tahar Moulay de Saida, Faculté des Sciences, Département de physique, En-nasr BP138, Saida 20000 (Algeria); Hou, M. [Université Libre de Bruxelles, Faculté des Sciences, CP 223, Bd du Triomphe, B-1050 Bruxelles (Belgium); Becquart, C.S. [Unité Matériaux et Transformations (UMET), UMR 8207 Université Lille-1, F-59655 Villeneuve d’Ascq Cédex (France); Domain, C. [EDF-R& D Département MMC, Les renardières, F-77818 Moret sur Loing Cédex (France); De Backer, A. [CCFE, Culham Centre for Fusion Energy, Abingdon (United Kingdom)

    2015-06-01

    We have used an Object Kinetic Monte Carlo (OKMC) model to simulate the long term evolution of the primary damage in Fe{sub 70}Cr{sub 20}Ni{sub 10} alloys. The mean number of Frenkel pairs created by different Primary Knocked on Atoms (PKA) was estimated by Molecular Dynamics using a ternary EAM potential developed in the framework of the PERFORM-60 European project. This number was then used to obtain the vacancy–interstitial recombination distance required in the calculation of displacement cascades in the Binary Collision Approximation (BCA) with code MARLOWE (Robinson, 1989). The BCA cascades have been generated in the 10–100 keV range with the MARLOWE code and two different screened Coulomb potentials, namely, the Molière approximation to the Thomas–Fermi potential and the so-called “Universal” potential by Ziegler, Biersack and Littmark (ZBL). These cascades have been used as input to the OKMC code LAKIMOCA (Domain et al., 2004), with a set of parameters for describing the mobility of point defect clusters based on ab initio calculations and experimental data. The cluster size distributions have been estimated for irradiation doses of 0.1 and 1 dpa, and a dose rate of 10{sup −7} dpa/s at 600 K. We demonstrate that, like in the case of BCC iron, cluster size distributions in the long term are independent of the cascade energy and that the recursive cascade model suggested for BCC iron in Souidi et al. (2011) also applies to FCC Fe{sub 70}Cr{sub 20}Ni{sub 10.} The results also show that the influence of the BCA potential is sizeable but the qualitative correspondence in the predicted long term evolution is excellent.

  18. Displacement Ventilation

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    Displacement ventilation is an interesting new type of air distribution principle which should be considered in connection with design of comfort ventilation in both smal1 and large spaces. Research activities on displacement ventilation are large all over the world and new knowledge of design...... methods appears continuously. This book gives an easy introduction to the basis of displacement ventilation and the chapters are written in the order which is used in a design procedure. The main text is extended by five appendices which show some of the new research activities taking place at Aalborg...

  19. Displacement Ventilation

    DEFF Research Database (Denmark)

    Bjørn, Erik; Mattsson, Magnus; Sandberg, Mats

    Full-scale experiments were made in a displacement ventilated room with two breathing thermal manikins to study the effect of movements and breathing on the vertical contaminant distribution, and on the personal exposure of occupants. Concentrations were measured with tracer gas equipment...

  20. Displacing use

    DEFF Research Database (Denmark)

    Kelly, Janet; Matthews, Ben

    2014-01-01

    -centred design process. We identified alternative design-relevant relationships between people and devices that are not specifically tied to the functions/uses of the devices, e.g. relationships between the healthcare professional and the device, between doctors and patients, and between patients and their own......This paper critically discusses the concept of use in design, suggesting that relevant relationships other than use are sometimes obscured by the usercentredness of design processes. We present a design case from the medical device domain that displaced the concept of use from the centre of a human...

  1. Comparing anisotropic displacement parameters in protein structures.

    Science.gov (United States)

    Merritt, E A

    1999-12-01

    The increasingly widespread use of synchrotron-radiation sources and cryo-preparation of samples in macromolecular crystallography has led to a dramatic increase in the number of macromolecular structures determined at atomic or near-atomic resolution. This permits expansion of the structural model to include anisotropic displacement parameters U(ij) for individual atoms. In order to explore the physical significance of these parameters in protein structures, it is useful to be able to compare quantitatively the electron-density distribution described by the refined U(ij) values associated with corresponding crystallographically independent atoms. This paper presents the derivation of an easily calculated correlation coefficient in real space between two atoms modeled with anisotropic displacement parameters. This measure is used to investigate the degree of similarity between chemically equivalent but crystallographically independent atoms in the set of protein structural models currently available from the Protein Data Bank.

  2. Job Displacement and Crime

    DEFF Research Database (Denmark)

    Bennett, Patrick; Ouazad, Amine

    individuals, i.e. high-tenure workers with strong attachment to their firm, who lose employment during a mass-layoff event. Pre-displacement data suggests no evidence of endogenous selection of workers for displacement during mass-layoffs: displaced workers’ propensity to commit crime exhibits...... theory of crime. Marital dissolution is more likely post-displacement, and we find small intra-family externalities of adult displacement on younger family members’ crime. The impact of displacement on crime is stronger in municipalities with higher capital and labor income inequalities....

  3. Interplay between interstitial displacement and displacive lattice transformations

    Science.gov (United States)

    Zhang, Xie; Hickel, Tilmann; Rogal, Jutta; Neugebauer, Jörg

    2016-09-01

    Diffusionless displacive lattice rearrangements, which include martensitic transformations, are in real materials often accompanied by a displacive drag of interstitials. The interplay of both processes leads to a particular atomistic arrangement of the interstitials in the product phase, which is decisive for its performance. An archetype example is the martensitic transformation in Fe-C alloys. One of the puzzles for this system is that the deviation from the cubic symmetry (i.e., the tetragonality) in the martensite resulting from this interplay is lower than what thermodynamics dictates. In our ab initio approach, the relative motion of C in the transforming lattice is studied with the nudged elastic band method. We prove that an atomic shearlike shuffle mechanism of adjacent (11 2 ¯) Fe layers along the ±[111] bcc directions is essential to achieve a redistribution of C atoms during the fcc → bcc transition, which fully explains the abnormal behavior. Furthermore, the good agreement with experiment validates our method to treat a diffusionless redistribution of interstitials and a displacive rearrangement of the host lattice simultaneously.

  4. Statelessness and environmental displacement

    Directory of Open Access Journals (Sweden)

    Jessie Connell

    2015-05-01

    Full Text Available Stateless people and migrants are at greater risk of displacement and are less likely to receive assistance; in turn, environmental displacement (especially multiple migrations heightens the risk of becoming stateless.

  5. Displacement data assimilation

    Science.gov (United States)

    Rosenthal, W. Steven; Venkataramani, Shankar; Mariano, Arthur J.; Restrepo, Juan M.

    2017-02-01

    We show that modifying a Bayesian data assimilation scheme by incorporating kinematically-consistent displacement corrections produces a scheme that is demonstrably better at estimating partially observed state vectors in a setting where feature information is important. While the displacement transformation is generic, here we implement it within an ensemble Kalman Filter framework and demonstrate its effectiveness in tracking stochastically perturbed vortices.

  6. XY displacement device

    NARCIS (Netherlands)

    Heerens, W.C.; Laham, C.D.; Holman, A.E.

    1997-01-01

    An XY-displacement device (1) with a four-fold symmetry comprises a reference frame (10); an object mount (20) for holding an object (22) to be displaced; an X-manipulator (100) coupled between the reference frame (10) and the object mount (20), which provides a rigid coupling between the object mou

  7. On γ-Fe→α-Fe in pure iron and pealitic in eutectoid steel transformation and ordered displacement mechanism of iron atom individuals at transitional phase boundary%纯铁γ-Fe到α-Fe和共析钢的珠光体转变与过渡相界铁原子个体有序位移机制

    Institute of Scientific and Technical Information of China (English)

    俞德刚

    2012-01-01

    The γ-Fe→α-Fe transformation of pure iron obeys the mechanism of iron atom individuals displacement of the transitional phase boundary, this mechanism is essentially equivalent to classical shear and different from diffusional mechanism. All the precipitation of proeutectoid ferrite certainly obeys the individual ordered displacement mechanism of iron atom at the transitional phase boundary, it is the first rule of solid transformation. Prior exclusion of carbon content of overcooling austenite is prerequisite for phase transformation of the overcooling non-carbon austenite to non-carbon ferrite, it is the second rule of solid transformation. The pealitic decomposition essentially is the pealitic ferrite precipitation of overcooling non-carbon austenite. It is argued that the diffusional mechanism of iron atom individual disordered displacement is not existence, and in fact the solid these transformations occurs by the mechanism of ordered displacement of multiple iron atoms or individual iron atom. The classification of shear and diffusinnal mechanism in solid transformation is meaningless.%纯铁γ-Fe的α-Fe转变遵循过渡相界铁原子个体有序位移机制,这个机制本质上等同于切变而差异于扩散机制。凡是过冷含碳奥氏体的先共析铁素体析出,必然服从相界铁原子个体有序位移机制;这是固态相变第一法则;凡是无碳铁素体必然得自过冷无碳奥氏体,故过冷含碳奥氏体务必预先除碳,这是第二法则。珠光体分解实质上为过冷无碳奥氏体的珠光体铁素体层片的析出,等轴铁素体的析出亦然。在此不存在铁原子个体无序位移扩散机制。铁碳系统固态相变存在群体有序位移切变与过渡相界个体有序机制两类型机制,切变和扩散两类型的分类不具现实和理论意义,这是固态相变物理的科学发展。

  8. Displacement Data Assimilation

    CERN Document Server

    Rosenthal, W Steven; Mariano, Arthur J; Restrepo, Juan M

    2016-01-01

    We show that modifying a Bayesian data assimilation scheme by incorporating kinematically-consistent displacement corrections produces a scheme that is demonstrably better at estimating partially observed state vectors in a setting where feature information important. While the displacement transformation is not tied to any particular assimilation scheme, here we implement it within an ensemble Kalman Filter and demonstrate its effectiveness in tracking stochastically perturbed vortices.

  9. Advanced Triangulation Displacement Sensors

    Science.gov (United States)

    Poteet, Wade M.; Cauthen, Harold K.

    1996-01-01

    Advanced optoelectronic triangulation displacement sensors undergoing development. Highly miniaturized, more stable, more accurate, and relatively easy to use. Incorporate wideband electronic circuits suitable for real-time monitoring and control of displacements. Measurements expected to be accurate to within nanometers. In principle, sensors mass-produced at relatively low unit cost. Potential applications numerous. Possible industrial application in measuring runout of rotating shaft or other moving part during fabrication in "zero-defect" manufacturing system, in which measured runout automatically corrected.

  10. Internal displacement in Burma.

    Science.gov (United States)

    Lanjouw, S; Mortimer, G; Bamforth, V

    2000-09-01

    The internal displacement of populations in Burma is not a new phenomenon. Displacement is caused by numerous factors. Not all of it is due to outright violence, but much is a consequence of misguided social and economic development initiatives. Efforts to consolidate the state by assimilating populations in government-controlled areas by military authorities on the one hand, while brokering cease-fires with non-state actors on the other, has uprooted civilian populations throughout the country. Very few areas in which internally displaced persons (IDPs) are found are not facing social turmoil within a climate of impunity. Humanitarian access to IDP populations remains extremely problematic. While relatively little information has been collected, assistance has been focused on targeting accessible groups. International concern within Burma has couched the problems of displacement within general development modalities, while international attention along its borders has sought to contain displacement. With the exception of several recent initiatives, few approaches have gone beyond assistance and engaged in the prevention or protection of the displaced.

  11. Job Displacement and Crime

    DEFF Research Database (Denmark)

    Bennett, Patrick; Ouazad, Amine

    We use a detailed employer-employee data set matched with detailed crime information (timing of crime, fines, convictions, crime type) to estimate the impact of job loss on an individual's probability to commit crime. We focus on job losses due to displacement, i.e. job losses in firms losing...

  12. The photoelectric displacement converter

    Science.gov (United States)

    Dragoner, Valeriu V.

    2005-02-01

    In the article are examined questions of constructing photoelectric displacement converter satisfying demands that are stated above. Converter has channels of approximate and precise readings. The approximate reading may be accomplished either by the method of reading from a code mask or by the method of the consecutive calculation of optical scale gaps number. Phase interpolator of mouar strips" gaps is determined as a precise measuring. It is shown mathematical model of converter that allow evaluating errors and operating speed of conversion.

  13. HIGH TEMPERATURE DISPLACEMENT SENSOR

    Institute of Scientific and Technical Information of China (English)

    Xu Longxiang; Zhang Jinyu; Schweitzer Gerhard

    2005-01-01

    A high temperature displacement sensor based on the principle of eddy-current is investigated. A new temperature compensation technique by using eddy-current effect is presented to satisfy the special requirement at high temperature up to 550℃. The experiment shows that the temperature compensation technique leads to good temperature stability for the sensors. The variation of the sensitivity as well as the temperature drift of the sensor with temperature compensation technique is only about 7.4% and 90~350 mV at 550℃ compared with that at room temperature, and that of the sensor without temperature compensation technique is about 31.2% and 2~3 V at 550℃ compared with that at room temperature. A new dynamic calibration method for the eddy-current displacement sensor is presented, which is very easy to be realized especially in high frequency and at high temperatures. The high temperature displacement sensors developed are successfully used at temperature up to 550℃ in a magnetic bearing system for more than 100 h.

  14. Spectroscopic observations of the displacement dynamics of physically adsorbed molecules-CO on C60

    Science.gov (United States)

    Yuan, Chunqing; Yates, John T.

    2016-10-01

    In this paper, we observed physically adsorbed CO molecules on C60 surface being displaced by impinging noble gas atoms (He, Ne, Ar, Kr), either through a dynamic displacement process or an exothermic replacement process, depending on their adsorption energies. This displacement mechanism could shift from one to the other depending on the surface coverage and temperature. Furthermore, rotational energy of the impinging molecules may also contribute to the dynamic displacement process by supplying additional energy.

  15. Second Order Darboux Displacements

    CERN Document Server

    Samsonov, B F; Negro, J; Nieto, L M

    2003-01-01

    The potentials for a one dimensional Schroedinger equation that are displaced along the x axis under second order Darboux transformations, called 2-SUSY invariant, are characterized in terms of a differential-difference equation. The solutions of the Schroedinger equation with such potentials are given analytically for any value of the energy. The method is illustrated by a two-soliton potential. It is proven that a particular case of the periodic Lame-Ince potential is 2-SUSY invariant. Both Bloch solutions of the corresponding Schroedinger equation equation are found for any value of the energy. A simple analytic expression for a family of two-gap potentials is derived.

  16. Helium vs. Proton Induced Displacement Damage in Electronic Materials

    Science.gov (United States)

    Ringo, Sawnese; Barghouty, A. F.

    2010-01-01

    In this project, the specific effects of displacement damage due to the passage of protons and helium nuclei on some typical electronic materials will be evaluated and contrasted. As the electronic material absorbs the energetic proton and helium momentum, degradation of performance occurs, eventually leading to overall failure. Helium nuclei traveling at the same speed as protons are expected to impart more to the material displacement damage; due to the larger mass, and thus momentum, of helium nuclei compared to protons. Damage due to displacement of atoms in their crystalline structure can change the physical properties and hence performance of the electronic materials.

  17. Displacing the Patient

    DEFF Research Database (Denmark)

    Pors, Anja Svejgaard

    2012-01-01

    The analysis is based on an empirical study of a hospital’s communication strategy entitled: 'The Perspective of the Patient'. The paper asks how the strategy organizes communication work as situated displacements of the patient. Based on methodological elements from situational analysis (Clarke ...... and market as mutually exclusive (Mol 2008), care and market appear to be intertwined in political patient figures through which the organization is trying to manage and transform itself from the inside......The analysis is based on an empirical study of a hospital’s communication strategy entitled: 'The Perspective of the Patient'. The paper asks how the strategy organizes communication work as situated displacements of the patient. Based on methodological elements from situational analysis (Clarke...... 2005) the analysis examines how the hospital’s patient communication is not just about disease treatment, but rather about information treatment of the patient in order to attain a high level of patient satisfaction. The goal of patient satisfaction addresses care-oriented understandings of the patient...

  18. Variable displacement blower

    Science.gov (United States)

    Bookout, Charles C.; Stotts, Robert E.; Waring, Douglass R.; Folsom, Lawrence R.

    1986-01-01

    A blower having a stationary casing for rotatably supporting a rotor assembly having a series of open ended chambers arranged to close against the surrounding walls of the casing. Pistons are slidably mounted within each chamber with the center of rotation of the pistons being offset in regard to the center of rotation of the rotor assembly whereby the pistons reciprocate in the chambers as the rotor assembly turns. As inlet port communicates with the rotor assembly to deliver a working substance into the chamber as the pistons approach a top dead center position in the chamber while an outlet port also communicates with the rotor to exhaust the working substance as the pistons approach a bottom dead center position. The displacement of the blower is varied by adjusting the amount of eccentricity between the center of rotation of the pistons and the center of rotation of the rotor assembly.

  19. Displacement Parameter Inversion for a Novel Electromagnetic Underground Displacement Sensor

    Directory of Open Access Journals (Sweden)

    Nanying Shentu

    2014-05-01

    Full Text Available Underground displacement monitoring is an effective method to explore deep into rock and soil masses for execution of subsurface displacement measurements. It is not only an important means of geological hazards prediction and forecasting, but also a forefront, hot and sophisticated subject in current geological disaster monitoring. In previous research, the authors had designed a novel electromagnetic underground horizontal displacement sensor (called the H-type sensor by combining basic electromagnetic induction principles with modern sensing techniques and established a mutual voltage measurement theoretical model called the Equation-based Equivalent Loop Approach (EELA. Based on that work, this paper presents an underground displacement inversion approach named “EELA forward modeling-approximate inversion method”. Combining the EELA forward simulation approach with the approximate optimization inversion theory, it can deduce the underground horizontal displacement through parameter inversion of the H-type sensor. Comprehensive and comparative studies have been conducted between the experimentally measured and theoretically inversed values of horizontal displacement under counterpart conditions. The results show when the measured horizontal displacements are in the 0–100 mm range, the horizontal displacement inversion discrepancy is generally tested to be less than 3 mm under varied tilt angles and initial axial distances conditions, which indicates that our proposed parameter inversion method can predict underground horizontal displacement measurements effectively and robustly for the H-type sensor and the technique is applicable for practical geo-engineering applications.

  20. Measuring vulnerability to disaster displacement

    Science.gov (United States)

    Brink, Susan A.; Khazai, Bijan; Power, Christopher; Wenzel, Friedemann

    2015-04-01

    Large scale disasters can cause devastating impacts in terms of population displacement. Between 2008 and 2013, on average 27 million people were displaced annually by disasters (Yonetani 2014). After large events such as hurricane Katrina or the Port-au-Prince earthquake, images of inadequate public shelter and concerns about large scale and often inequitable migration have been broadcast around the world. Population displacement can often be one of the most devastating and visible impacts of a natural disaster. Despite the importance of population displacement in disaster events, measures to understand the socio-economic vulnerability of a community often use broad metrics to estimate the total socio-economic risk of an event rather than focusing on the specific impacts that a community faces in a disaster. Population displacement is complex and multi-causal with the physical impact of a disaster interacting with vulnerability arising from the response, environmental issues (e.g., weather), cultural concerns (e.g., expectations of adequate shelter), and many individual factors (e.g., mobility, risk perception). In addition to the complexity of the causes, population displacement is difficult to measure because of the wide variety of different terms and definitions and its multi-dimensional nature. When we speak of severe population displacement, we may refer to a large number of displaced people, an extended length of displacement or associated difficulties such as poor shelter quality, risk of violence and crime in shelter communities, discrimination in aid, a lack of access to employment or other difficulties that can be associated with large scale population displacement. We have completed a thorough review of the literature on disaster population displacement. Research has been conducted on historic events to understand the types of negative impacts associated with population displacement and also the vulnerability of different groups to these impacts. We

  1. Point Coupled Displacement Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Real-time displacement measurement techniques are needed to acquire aerodynamic and structural system characteristics in flight. This proposal describes the...

  2. Displacement, Substitution, Sublimation: A Bibliography.

    Science.gov (United States)

    Pedrini, D. T.; Pedrini, Bonnie C.

    Sigmund Freund worked with the mechanisms of displacement, substitution, and sublimation. These mechanisms have many similarities and have been studied diagnostically and therapeutically. Displacement and substitution seem to fit in well with phobias, hysterias, somatiyations, prejudices, and scapegoating. Phobias, prejudices, and scapegoating…

  3. OIL DISPLACEMENT IN MISCIBLE CONDITION

    Directory of Open Access Journals (Sweden)

    Ivanka Juttner

    1997-12-01

    Full Text Available After primary oil recovery in reservoirs remains about 70% of unexploited oil. To improve the recovery of the remaining reserves, injection of a fluid provide the extra energy in a mchunical form. Oil displacement can he achieved by gas injection of lean natural gas, mainly methane, carbon dioxide etc. Oil displacement can be in immiscible or miscible conditions. This paper deals with mechanism of miscible gas drive. On the basis of simulation of the oil displacement process by gas injection into oil field Žutica the character of process, i. c. a degree of miscibility or immiscibility between the injected fluid and reservoir oil was determined.

  4. To prevent or pursue displacement?

    OpenAIRE

    2012-01-01

    The repertoire of survival actions of at-risk civilians includes bothavoiding and attempting displacement. But there are also overlaps,combinations and tacking back and forth between the two, whiletrying to mitigate the risks that any choice entails.

  5. Internal displacement in eastern Burma

    OpenAIRE

    Heather Rae

    2007-01-01

    The history of post-independent Burma is characterisedby numerous conflicts in this extraordinarily heterogeneous country. Since military rule began in 196 2 Burmahas witnessed gross human rights abuses andmassive displacement.

  6. Internal displacement in eastern Burma

    Directory of Open Access Journals (Sweden)

    Heather Rae

    2007-07-01

    Full Text Available The history of post-independent Burma is characterisedby numerous conflicts in this extraordinarily heterogeneous country. Since military rule began in 196 2 Burmahas witnessed gross human rights abuses andmassive displacement.

  7. Squeezed Phonons: Modulating Quantum Fluctuations of Atomic Displacements.

    Science.gov (United States)

    Hu, Xuedong; Nori, Franco

    1997-03-01

    We have studied phonon squeezed states and also put forward several proposals for their generation(On phonon parametric process, X. Hu and F. Nori, Phys. Rev. Lett. 76), 2294 (1996); on polariton mechanism, X. Hu and F. Nori, Phys. Rev. B 53, 2419 (1996); on second-order Raman scattering, X. Hu and F. Nori, preprint.. Here, we compare the relative merits and limitations of these approaches, including several factors that will limit the amount of phonon squeezing. In particular, we investigate the effect of the initial thermal states on the phonon modes. Using a model for the phonon density matrix, we also study the mixing of the phonon squeezed states with thermal states, which describes the decay of the phonon coherence. Finally, we calculate the maximum possible squeezing from a phonon parametric process limited by phonon decay.

  8. Displacement currents in geoelectromagnetic problems

    Science.gov (United States)

    Mogilatov, Vladimir; Goldman, Mark; Persova, Marina; Soloveichik, Yury

    2014-06-01

    The influence of displacement currents in conventional geoelectromagnetic (GEM) methods using unimodal transversal electric (TE) or multimodal TE and TM (transversal magnetic) fields is only significant at very high frequencies in the frequency domain or at extremely early times in the time domain. The transient process in the latter includes three stages: the propagation through air, the propagation through earth and the diffusion within the earth. The influence of displacement currents is significant mainly during the former two stages, normally up to several tens to a few hundreds of nanoseconds. The behavior is essentially different in novel GEM methods using a vertical electric dipole (VED) or circular electric dipole (CED) sources of unimodal TM-fields. Under certain geoelectric conditions, the influence of displacement currents in these methods might be crucial at late times as well. This happens, if the model consists of insulating layers. In the absence of displacement currents, such layers would totally mask underlying structures. However, TM-fields including displacement currents depend on geoelectric parameters below insulating layers at late times.

  9. Calculation of electron-beam induced displacement in thin films by using parameter-reduced formulas

    Science.gov (United States)

    Yan, Qiang; Chen, Di; Wang, Qingyu; Li, Zhongyu; Shao, Lin

    2017-03-01

    Based on the Mott cross sections of relativistic electron collisions with atoms, we calculate displacement creation by electron beams of arbitrary energies (up to 100 MeV) in thin films of arbitrary atomic numbers (up to Z = 90). In a comparison with Mont Carlo full damage cascade simulations, we find that total number of displacements in a film can be accurately estimated as the product of average displacements created per collision and average collision numbers in the film. To calculate average displacements per electron-atom collision, energy transfer from Mott cross section is combined with NRT model. To calculate collision numbers, mean deflection angles and multi-scattering theory are combined to extract collision number dependence on film thickness. For each key parameter, parameter-reduced formulas are obtained from data fitting. The fitting formulas provide a quick and accurate method to estimate radiation damage caused by electron beams.

  10. Understanding interferometry for micro-cantilever displacement detection

    Directory of Open Access Journals (Sweden)

    Alexander von Schmidsfeld

    2016-06-01

    Full Text Available Interferometric displacement detection in a cantilever-based non-contact atomic force microscope (NC-AFM operated in ultra-high vacuum is demonstrated for the Michelson and Fabry–Pérot modes of operation. Each mode is addressed by appropriately adjusting the distance between the fiber end delivering and collecting light and a highly reflective micro-cantilever, both together forming the interferometric cavity. For a precise measurement of the cantilever displacement, the relative positioning of fiber and cantilever is of critical importance. We describe a systematic approach for accurate alignment as well as the implications of deficient fiber–cantilever configurations. In the Fabry–Pérot regime, the displacement noise spectral density strongly decreases with decreasing distance between the fiber-end and the cantilever, yielding a noise floor of 24 fm/Hz0.5 under optimum conditions.

  11. Formation around planetary displaced orbit

    Institute of Scientific and Technical Information of China (English)

    GONG Sheng-ping; LI Jun-feng; BAOYIN He-xi

    2007-01-01

    The paper investigates the relative motion around the planetary displaced orbit. Several kinds of displaced orbits for geocentric and martian cases were discussed. First, the relative motion was linearized around the displaced orbits. Then, two seminatural control laws were investigated for each kind of orbit and the stable regions were obtained for each case. One of the two control laws is the passive control law that is very attractive for engineering practice. However, the two control laws are not very suitable for the Martian mission. Another special semi-natural control law is designed based on the requirement of the Martian mission. The results show that large stable regions exist for the control law.

  12. Perceived Displacement explains Wolfpack Effect

    Directory of Open Access Journals (Sweden)

    Matúš eŠimkovic

    2014-12-01

    Full Text Available We investigate the influence of perceived displacement of moving agent-like stimuli on the performance in dynamic interactive tasks. In order to reliably measure perceived displacement we utilize multiple tasks with different task demands. The perceived center of an agent’s body is displaced in the direction in which the agent is facing and this perceived displacement is larger than the theoretical position of the center of mass would predict. Furthermore, the displacement in the explicit judgment is dissociated from the displacement obtained by the implicit measures. By manipulating the location of the pivot point, we show that it is not necessary to postulate orientation as an additional cue utilized by perception, as has been suggested by earlier studies. These studies showed that the agent’s orientation influences the detection of chasing motion and the detection-related performance in interactive tasks. This influence has been labeled wolfpack effect. In one of the demonstrations of the wolfpack effect participants control a green circle on a display with a computer mouse. It has been shown that participants avoid display areas withagents pointing towards the green circle. Participants do so in favor of areas where the agents point in the direction perpendicular to the circle. We show that this avoidance behavior arises because the agent’s pivot point selected by the earlier studies is different from where people locate the center of agent’s body. As a consequence, the nominal rotation confounds rotation and translation. We show that the avoidance behavior disappears once the pivot point is set to the center of agent’s body.

  13. Displacement ventilation in lecture halls

    OpenAIRE

    Egorov, Artem

    2013-01-01

    This thesis considers several important goals. The main purpose is to see how displacement ventilation sys-tem works in the lecture hall of M-building and compare obtained results with D2 and Indoor Climate Classi-fication. The second one is to analyze the function of the ventilation system. The last one is to realize when displacement ventilation is preferable to mixing ventilation. Analysis of the system was carried out with instruments from MUAS HVAC laboratory. In lecture hall were me...

  14. DISPLACEMENT BASED SEISMIC DESIGN METHODS.

    Energy Technology Data Exchange (ETDEWEB)

    HOFMAYER,C.MILLER,C.WANG,Y.COSTELLO,J.

    2003-07-15

    A research effort was undertaken to determine the need for any changes to USNRC's seismic regulatory practice to reflect the move, in the earthquake engineering community, toward using expected displacement rather than force (or stress) as the basis for assessing design adequacy. The research explored the extent to which displacement based seismic design methods, such as given in FEMA 273, could be useful for reviewing nuclear power stations. Two structures common to nuclear power plants were chosen to compare the results of the analysis models used. The first structure is a four-story frame structure with shear walls providing the primary lateral load system, referred herein as the shear wall model. The second structure is the turbine building of the Diablo Canyon nuclear power plant. The models were analyzed using both displacement based (pushover) analysis and nonlinear dynamic analysis. In addition, for the shear wall model an elastic analysis with ductility factors applied was also performed. The objectives of the work were to compare the results between the analyses, and to develop insights regarding the work that would be needed before the displacement based analysis methodology could be considered applicable to facilities licensed by the NRC. A summary of the research results, which were published in NUREGICR-6719 in July 2001, is presented in this paper.

  15. Displacement and difference in Lubumbashi

    Directory of Open Access Journals (Sweden)

    Aurelia Wa Kabwe-Segatti

    2007-01-01

    Full Text Available Signs on the outskirts of the second largest city in the Democratic Republic of Congo (DRC welcome visitors to ‘the city of peace’. Lubumbashi has a reputation as a haven of tolerance in a violent nation but how are displaced people treated?

  16. To prevent or pursue displacement?

    Directory of Open Access Journals (Sweden)

    Casey Barrs

    2012-12-01

    Full Text Available The repertoire of survival actions of at-risk civilians includes bothavoiding and attempting displacement. But there are also overlaps,combinations and tacking back and forth between the two, whiletrying to mitigate the risks that any choice entails.

  17. Mechanism of single atom switch on silicon

    DEFF Research Database (Denmark)

    Quaade, Ulrich; Stokbro, Kurt; Thirstrup, C.

    1998-01-01

    We demonstrate single atom switch on silicon which operates by displacement of a hydrogen atom on the silicon (100) surface at room temperature. We find two principal effects by which the switch is controlled: a pronounced maximum of the switching probability as function of sample bias...

  18. Influence of subcascade formation on displacement damage at high PKA energies

    Energy Technology Data Exchange (ETDEWEB)

    Stoller, R.E. [Oak Ridge National Lab., TN (United States); Greenwood, L.R. [Pacific Northwest National Lab., Richland, WA (United States)

    1997-08-01

    The design of first generation fusion reactors will have to be rely on radiation effects data obtained from experiments conducted in fission reactors. Two issues must be addressed to use this data with confidence. The first is differences in the neutron energy spectrum, and the second is differences in nuclear transmutation rates. Differences in the neutron energy spectra are reflected in the energy spectra of the primary knockon atoms (PKA). The issue of PKA energy effects has been addressed through the use of displacement cascade simulations using the method of molecular dynamics (MD). Although MD simulations can provide a detailed picture of the formation and evolution of displacement cascades, they impose a substantial computational burden. However, recent advances in computing equipment permit the simulation of high energy displacement events involving more than one-million atoms; the results presented here encompass MD cascade simulation energies from near the displacement threshold to as high as 40 keV. Two parameters have been extracted from the MD simulations: the number of point defects that remain after the displacement event is completed and the fraction of the surviving interstitials that are contained in clusters. The MD values have been normalized to the number of atomic displacements calculated with the secondary displacement model by Norgett, Robinson, and Torrens (NRT).

  19. Tunable Cavity Optomechanics with Ultracold Atoms

    CERN Document Server

    Purdy, T P; Botter, T; Brahms, N; Ma, Z -Y; Stamper-Kurn, D M

    2010-01-01

    We present an atom-chip-based realization of quantum cavity optomechanics with cold atoms localized within a Fabry-Perot cavity. Effective sub-wavelength positioning of the atomic ensemble allows for tuning the linear and quadratic optomechanical coupling parameters, varying the sensitivity to the displacement and strain of a compressible gaseous cantilever. We observe effects of such tuning on cavity optical nonlinearity and optomechanical frequency shifts, providing their first characterization in the quadratic-coupling regime.

  20. Hirshfeld atom refinement.

    Science.gov (United States)

    Capelli, Silvia C; Bürgi, Hans-Beat; Dittrich, Birger; Grabowsky, Simon; Jayatilaka, Dylan

    2014-09-01

    Hirshfeld atom refinement (HAR) is a method which determines structural parameters from single-crystal X-ray diffraction data by using an aspherical atom partitioning of tailor-made ab initio quantum mechanical molecular electron densities without any further approximation. Here the original HAR method is extended by implementing an iterative procedure of successive cycles of electron density calculations, Hirshfeld atom scattering factor calculations and structural least-squares refinements, repeated until convergence. The importance of this iterative procedure is illustrated via the example of crystalline ammonia. The new HAR method is then applied to X-ray diffraction data of the dipeptide Gly-l-Ala measured at 12, 50, 100, 150, 220 and 295 K, using Hartree-Fock and BLYP density functional theory electron densities and three different basis sets. All positions and anisotropic displacement parameters (ADPs) are freely refined without constraints or restraints - even those for hydrogen atoms. The results are systematically compared with those from neutron diffraction experiments at the temperatures 12, 50, 150 and 295 K. Although non-hydrogen-atom ADPs differ by up to three combined standard uncertainties (csu's), all other structural parameters agree within less than 2 csu's. Using our best calculations (BLYP/cc-pVTZ, recommended for organic molecules), the accuracy of determining bond lengths involving hydrogen atoms from HAR is better than 0.009 Å for temperatures of 150 K or below; for hydrogen-atom ADPs it is better than 0.006 Å(2) as judged from the mean absolute X-ray minus neutron differences. These results are among the best ever obtained. Remarkably, the precision of determining bond lengths and ADPs for the hydrogen atoms from the HAR procedure is comparable with that from the neutron measurements - an outcome which is obtained with a routinely achievable resolution of the X-ray data of 0.65 Å.

  1. Single-mode displacement sensor

    Science.gov (United States)

    Duivenvoorden, Kasper; Terhal, Barbara M.; Weigand, Daniel

    2017-01-01

    We show that one can determine both parameters of a displacement acting on an oscillator with an accuracy which scales inversely with the square root of the number of photons in the oscillator. Our results are obtained by using a grid state as a sensor state for detecting small translations in phase space (displacements). Grid states were first proposed [D. Gottesman et al., Phys. Rev. A 64, 012310 (2001), 10.1103/PhysRevA.64.012310] for encoding a qubit into an oscillator: an efficient preparation protocol of such states, using a coupling to a qubit, was later developed [B. M. Terhal and D. Weigand, Phys. Rev. A 93, 012315 (2016), 10.1103/PhysRevA.93.012315]. We compare the performance of the grid state with the quantum compass or cat code state and place our results in the context of the two-parameter quantum Cramér-Rao lower bound on the variances of the displacement parameters. We show that the accessible information about the displacement for a grid state increases with the number of photons in the state when we measure and prepare the state using a phase estimation protocol. This is in contrast with the accessible information in the quantum compass state which we show is always upper bounded by a constant, independent of the number of photons. We present numerical simulations of a phase estimation based preparation protocol of a grid state in the presence of photon loss, nonlinearities, and qubit measurement, using no post-selection, showing how the two effective squeezing parameters which characterize the grid state change during the preparation. The idea behind the phase estimation protocol is a simple maximal-information gain strategy.

  2. Atom chips

    CERN Document Server

    Reichel, Jakob

    2010-01-01

    This book provides a stimulating and multifaceted picture of a rapidly developing field. The first part reviews fundamentals of atom chip research in tutorial style, while subsequent parts focus on the topics of atom-surface interaction, coherence on atom chips, and possible future directions of atom chip research. The articles are written by leading researchers in the field in their characteristic and individual styles.

  3. Atomic energy

    CERN Multimedia

    1996-01-01

    Interviews following the 1991 co-operation Agreement between the Department of Atomic Energy (DAE) of the Government of India and the European Organization for Nuclear Research (CERN) concerning the participation in the Large Hadron Collider Project (LHC) . With Chidambaram, R, Chairman, Atomic Energy Commission and Secretary, Department of Atomic Energy, Department of Atomic Energy (DAE) of the Government of India and Professor Llewellyn-Smith, Christopher H, Director-General, CERN.

  4. 25 CFR 700.59 - Displaced person.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Displaced person. 700.59 Section 700.59 Indians THE OFFICE OF NAVAJO AND HOPI INDIAN RELOCATION COMMISSION OPERATIONS AND RELOCATION PROCEDURES General Policies and Instructions Definitions § 700.59 Displaced person. Displaced person means a member of...

  5. Atomic polarizabilities

    Energy Technology Data Exchange (ETDEWEB)

    Safronova, M. S. [Department of Physics and Astronomy, University of Delaware, Newark, DE 19716 (United States); Mitroy, J. [School of Engineering, Charles Darwin University, Darwin NT 0909 (Australia); Clark, Charles W. [Joint Quantum Institute, National Institute of Standards and Technology and the University of Maryland, Gaithersburg, Maryland 20899-8410 (United States); Kozlov, M. G. [Petersburg Nuclear Physics Institute, Gatchina 188300 (Russian Federation)

    2015-01-22

    The atomic dipole polarizability governs the first-order response of an atom to an applied electric field. Atomic polarization phenomena impinge upon a number of areas and processes in physics and have been the subject of considerable interest and heightened importance in recent years. In this paper, we will summarize some of the recent applications of atomic polarizability studies. A summary of results for polarizabilities of noble gases, monovalent, and divalent atoms is given. The development of the CI+all-order method that combines configuration interaction and linearized coupled-cluster approaches is discussed.

  6. DISPLACEMENT BASED SEISMIC DESIGN CRITERIA

    Energy Technology Data Exchange (ETDEWEB)

    HOFMAYER,C.H.

    1999-03-29

    The USNRC has initiated a project to determine if any of the likely revisions to traditional earthquake engineering practice are relevant to seismic design of the specialized structures, systems and components of nuclear power plants and of such significance to suggest that a change in design practice might be warranted. As part of the initial phase of this study, a literature survey was conducted on the recent changes in seismic design codes/standards, on-going activities of code-writing organizations/communities, and published documents on displacement-based design methods. This paper provides a summary of recent changes in building codes and on-going activities for future codes. It also discusses some technical issues for further consideration.

  7. Displacement Based Seismic Design Criteria

    Energy Technology Data Exchange (ETDEWEB)

    Costello, J.F.; Hofmayer, C.; Park, Y.J.

    1999-03-29

    The USNRC has initiated a project to determine if any of the likely revisions to traditional earthquake engineering practice are relevant to seismic design of the specialized structures, systems and components of nuclear power plants and of such significance to suggest that a change in design practice might be warranted. As part of the initial phase of this study, a literature survey was conducted on the recent changes in seismic design codes/standards, on-going activities of code-writing organizations/communities, and published documents on displacement-based design methods. This paper provides a summary of recent changes in building codes and on-going activities for future codes. It also discusses some technical issues for further consideration.

  8. Displaceable Gear Torque Controlled Driver

    Science.gov (United States)

    Cook, Joseph S., Jr. (Inventor)

    1997-01-01

    Methods and apparatus are provided for a torque driver including a displaceable gear to limit torque transfer to a fastener at a precisely controlled torque limit. A biasing assembly biases a first gear into engagement with a second gear for torque transfer between the first and second gear. The biasing assembly includes a pressurized cylinder controlled at a constant pressure that corresponds to a torque limit. A calibrated gage and valve is used to set the desired torque limit. One or more coiled output linkages connect the first gear with the fastener adaptor which may be a socket for a nut. A gear tooth profile provides a separation force that overcomes the bias to limit torque at the desired torque limit. Multiple fasteners may be rotated simultaneously to a desired torque limit if additional output spur gears are provided. The torque limit is adjustable and may be different for fasteners within the same fastener configuration.

  9. Simulating the displacement effect in electronics exposed to space radiation by fission and 14 MeV neutrons; Simulation de l'effet ''deplacement d'atome'' dans l'electronique soumise au rayonnement spatial, par des neutrons de fission et des neutrons de 14 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Zyromski, Ph. [CEA Valduc, Dept. Recherche sur les Materiaux Nucleaires, 21 - Is-sur-Tille (France)

    1999-07-01

    Various spatial radiation inducing displacement effect in the on board electronics may be quantified by a 1 MeV (Si) equivalent neutron fluence. Simulating this effect is made easier by using the PROSPERO reactor (fission neutrons) or the SAMES 400 kV accelerator (14 MeV neutrons) which data are recalled. (author)

  10. Modelling toehold-mediated RNA strand displacement

    CERN Document Server

    Šulc, Petr; Romano, Flavio; Doye, Jonathan P K; Louis, Ard A

    2014-01-01

    We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We study the rate of displacement reactions as a function of the length of the toehold and temperature and make two experimentally testable predictions: that the displacement is faster if the toehold is placed at the 5' end of the substrate and that the displacement slows down with increasing temperature for longer toeholds.

  11. Preventing re-displacement through genuine reintegration in Burundi

    Directory of Open Access Journals (Sweden)

    Lucy Hovil

    2012-12-01

    Full Text Available Displacement is often part of a cyclical process of conflict anddisplacement. Preventing displacement, therefore, is not only aboutpreventing new displacement but about ensuring that people do notget re-displaced.

  12. Displacement based multilevel structural optimization

    Science.gov (United States)

    Striz, Alfred G.

    1995-01-01

    Multidisciplinary design optimization (MDO) is expected to play a major role in the competitive transportation industries of tomorrow, i.e., in the design of aircraft and spacecraft, of high speed trains, boats, and automobiles. All of these vehicles require maximum performance at minimum weight to keep fuel consumption low and conserve resources. Here, MDO can deliver mathematically based design tools to create systems with optimum performance subject to the constraints of disciplines such as structures, aerodynamics, controls, etc. Although some applications of MDO are beginning to surface, the key to a widespread use of this technology lies in the improvement of its efficiency. This aspect is investigated here for the MDO subset of structural optimization, i.e., for the weight minimization of a given structure under size, strength, and displacement constraints. Specifically, finite element based multilevel optimization of structures (here, statically indeterminate trusses and beams for proof of concept) is performed. In the system level optimization, the design variables are the coefficients of assumed displacement functions, and the load unbalance resulting from the solution of the stiffness equations is minimized. Constraints are placed on the deflection amplitudes and the weight of the structure. In the subsystems level optimizations, the weight of each element is minimized under the action of stress constraints, with the cross sectional dimensions as design variables. This approach is expected to prove very efficient, especially for complex structures, since the design task is broken down into a large number of small and efficiently handled subtasks, each with only a small number of variables. This partitioning will also allow for the use of parallel computing, first, by sending the system and subsystems level computations to two different processors, ultimately, by performing all subsystems level optimizations in a massively parallel manner on separate

  13. Tracking speckle displacement by double Kalman filtering

    Institute of Scientific and Technical Information of China (English)

    Donghui Li; Li Guo

    2006-01-01

    @@ A tracking technique using two sequentially-connected Kalman filter for tracking laser speckle displacement is presented. One Kalman filter tracks temporal speckle displacement, while another Kalman filter tracks spatial speckle displacement. The temporal Kalman filter provides a prior for the spatial Kalman filter, and the spatial Kalman filter provides measurements for the temporal Kalman filter. The contribution of a prior to estimations of the spatial Kalman filter is analyzed. An optical analysis system was set up to verify the double-Kalman-filter tracker's ability of tracking laser speckle's constant displacement.

  14. Displacement of Propagating Squeezed Microwave States

    Science.gov (United States)

    Fedorov, Kirill G.; Zhong, L.; Pogorzalek, S.; Eder, P.; Fischer, M.; Goetz, J.; Xie, E.; Wulschner, F.; Inomata, K.; Yamamoto, T.; Nakamura, Y.; Di Candia, R.; Las Heras, U.; Sanz, M.; Solano, E.; Menzel, E. P.; Deppe, F.; Marx, A.; Gross, R.

    2016-07-01

    Displacement of propagating quantum states of light is a fundamental operation for quantum communication. It enables fundamental studies on macroscopic quantum coherence and plays an important role in quantum teleportation protocols with continuous variables. In our experiments, we have successfully implemented this operation for propagating squeezed microwave states. We demonstrate that, even for strong displacement amplitudes, there is no degradation of the squeezing level in the reconstructed quantum states. Furthermore, we confirm that path entanglement generated by using displaced squeezed states remains constant over a wide range of the displacement power.

  15. Atomic physics

    CERN Document Server

    Born, Max

    1989-01-01

    The Nobel Laureate's brilliant exposition of the kinetic theory of gases, elementary particles, the nuclear atom, wave-corpuscles, atomic structure and spectral lines, electron spin and Pauli's principle, quantum statistics, molecular structure and nuclear physics. Over 40 appendices, a bibliography, numerous figures and graphs.

  16. Hirshfeld atom refinement

    Directory of Open Access Journals (Sweden)

    Silvia C. Capelli

    2014-09-01

    Full Text Available Hirshfeld atom refinement (HAR is a method which determines structural parameters from single-crystal X-ray diffraction data by using an aspherical atom partitioning of tailor-made ab initio quantum mechanical molecular electron densities without any further approximation. Here the original HAR method is extended by implementing an iterative procedure of successive cycles of electron density calculations, Hirshfeld atom scattering factor calculations and structural least-squares refinements, repeated until convergence. The importance of this iterative procedure is illustrated via the example of crystalline ammonia. The new HAR method is then applied to X-ray diffraction data of the dipeptide Gly–l-Ala measured at 12, 50, 100, 150, 220 and 295 K, using Hartree–Fock and BLYP density functional theory electron densities and three different basis sets. All positions and anisotropic displacement parameters (ADPs are freely refined without constraints or restraints – even those for hydrogen atoms. The results are systematically compared with those from neutron diffraction experiments at the temperatures 12, 50, 150 and 295 K. Although non-hydrogen-atom ADPs differ by up to three combined standard uncertainties (csu's, all other structural parameters agree within less than 2 csu's. Using our best calculations (BLYP/cc-pVTZ, recommended for organic molecules, the accuracy of determining bond lengths involving hydrogen atoms from HAR is better than 0.009 Å for temperatures of 150 K or below; for hydrogen-atom ADPs it is better than 0.006 Å2 as judged from the mean absolute X-ray minus neutron differences. These results are among the best ever obtained. Remarkably, the precision of determining bond lengths and ADPs for the hydrogen atoms from the HAR procedure is comparable with that from the neutron measurements – an outcome which is obtained with a routinely achievable resolution of the X-ray data of 0.65 Å.

  17. Displacive radiation-induced structural contraction in nanocrystalline ZrN

    Energy Technology Data Exchange (ETDEWEB)

    Lu Fengyuan; Sun Hongtao; Lian Jie [Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytech Institute, Troy, New York 12180 (United States); Huang, Mengbing; Yaqoob, Faisal [Ion Beam Laboratory, University at Albany-SUNY, Albany, New York 12222 (United States); Lang, Maik; Ewing, Rodney C. [Departments of Earth and Environmental Sciences and Materials Sciences and Engineering, University of Michigan, Ann Arbor, Michigan 48109-1005 (United States); Namavar, Fereydoon [Department of Orthopaedic Surgery and Rehabilitation, University of Nebraska Medical Center, Omaha, Nebraska 68198 (United States); Trautmann, Christina [GSI Helmholtz Center for Heavy Ion Research, 64291 Darmstadt (Germany); Technische Universitaet Darmstadt, 64289 Darmstadt (Germany)

    2012-07-23

    Nanocrystalline ZrN thin films with 5 nm grain size, prepared by ion beam assisted deposition, maintained their isometric structure upon intensive displacive and ionizing irradiations, indicating an extremely high stability similar to bulk ZrN. However, a unique structural contraction up to 1.42% in lattice parameter occurred only in nano-sized ZrN upon displacive irradiations. A significant nitrogen loss occurred with reduced N:Zr atomic ratio to 0.88, probably due to the production of displaced nitrogen atoms and fast diffusion along grain boundaries in nanocrystalline ZrN matrix. The accumulation of nitrogen vacancies and related strain relaxation may be responsible for the structural contraction.

  18. First-principles and classical molecular dynamics study of threshold displacement energy in beryllium

    Science.gov (United States)

    Vladimirov, P. V.; Borodin, V. A.

    2017-02-01

    Beryllium selected as a neutron multiplier material for the tritium breeding blanket of fusion reactor should withstand high doses of fast neutron irradiation. The damage produced by irradiation is usually evaluated assuming that the number of atomic displacements to the threshold displacement energy, Ed, which is considered as an intrinsic material parameter. In this work the value of Ed for hcp beryllium is estimated simultaneously from classical and first-principles molecular dynamics simulations. Quite similar quantitative pictures of defect production are observed in both simulation types, though the predicted displacement threshold values seem to be approximately two times higher in the first-principles approach. We expect that, after more detailed first-principles investigations, this approach can be used for scaling the damage prediction predictions by classical molecular dynamics, opening a way for more consistent calculations of displacement damage in materials.

  19. Effect of strain and temperature on the threshold displacement energy in body-centered cubic iron

    Science.gov (United States)

    Beeler, Benjamin; Asta, Mark; Hosemann, Peter; Grønbech-Jensen, Niels

    2016-06-01

    The threshold displacement energy (TDE) is the minimum amount of kinetic energy required to displace an atom from its lattice site. The magnitude of the TDE displays significant variance as a function of the crystallographic direction, system temperature and applied strain, among a variety of other factors. It is critically important to determine an accurate value of the TDE in order to calculate the total number of displacements due to a given irradiation condition, and thus to understand the materials response to irradiation. In this study, molecular dynamics simulations have been performed to calculate the threshold displacement energy in body-centered cubic iron as a function of strain and temperature. With applied strain, a decrease of the TDE of up to approximately 14 eV was observed. A temperature increase from 300 K to 500 K can result in an increase of the TDE of up to approximately 9 eV.

  20. Arizona: In Search of the Displaced Homemaker.

    Science.gov (United States)

    Woods, Doris

    The model described offers information about displaced homemakers that, while specific to Arizona, can provide a guide to persons in any state responsible for program planning. The report presents results of an Arizona Department of Education study which was conducted to: (1) identify the "displaced homemaker;" (2) define the need for services;…

  1. Flow cell system for miscible displacement experiments

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, S.H.; Kirkham, D.

    1971-02-01

    The use of a continuous graphic recording system for flow-component measurement in miscible displacement experiments is described. This system measures and continuously records radioactive tracer concentrations of effluents of miscible displacement columns. The recordings are needed breakthrough curves. The use of the system obviates fraction collectors.

  2. Etiopathogenesis of abomasal displacement in cattle

    Directory of Open Access Journals (Sweden)

    Šamanc Horea

    2003-01-01

    Full Text Available Abomasal displacement presents topographic gastropathy, where this organ has changed its position, and there is simultaneous dilatation which can vary in intensity. The incidence of this disorder in herds of high-yield dairy cows varies to a great degree (1 to 18 %. Abomasal displacement was established in herds of East-Frisian cows in 1 to 3% animals, and in Holstein cow herds in 5 to 18 % animals. The most frequent abomasal displacement is to the left (88%. There is significant seasonal variation in the incidence of abomasal displacement. About two-thirds of cases of abomasal displacement are diagnosed from October until April. The disorder appears more frequently in cows with repeated lactations. It has been established that it appears after the first calving in 27.8% cases, after the second to fifth calving in 66.7% cases, and after the sixth and seventh calving in 5.5% of the cows. The response of endocrine pancreas B-cells for insulin secretion to hyperglycaemia caused by applying an excess-glucose test is reduced in cows with left abomasal displacement, and there is constant hyperglycaemia in cows with right abomasal displacement. The excess-glucose test indicates a disrupted function of the endocrine pancreas in diseased animals. It has been determined through examinations of Aml genotypes in Holstein cow herds in connection with the appearance of abomasal displacement, that the occurrence of this disorder cannot be attributed to a genetic predisposition.

  3. Nonsurgical gingival displacement in restorative dentistry.

    Science.gov (United States)

    Thomas, Manuel S; Joseph, Robin Mathai; Parolia, Abhishek

    2011-06-01

    Gingival displacement is critical for obtaining accurate impressions for the fabrication of fixed restorations, especially when the finish line is at or just within the gingival sulcus. Displacement of the gingival tissue is also important when dealing with the restoration of cervical lesions due to their proximity to the periodontal tissue. The methods of gingival tissue displacement can be broadly classified as nonsurgical and surgical techniques, with nonsurgical being the more commonly practiced method. Dentists must alter their armamentarium and gingival displacement techniques to meet specific demands and obtain predictable results. Hence, the purpose of this article is to describe the different means by which nonsurgical gingival displacement can be achieved effectively under a variety of clinical situations.

  4. Internal displacement in Colombia: Fifteen distinguishing features.

    Science.gov (United States)

    Shultz, James M; Ceballos, Ángela Milena Gómez; Espinel, Zelde; Oliveros, Sofia Rios; Fonseca, Maria Fernanda; Florez, Luis Jorge Hernandez

    2014-01-01

    This commentary aims to delineate the distinguishing features of conflict-induced internal displacement in the nation of Colombia, South America. Even as Colombia is currently implementing a spectrum of legal, social, economic, and health programs for "victims of armed conflict," with particular focus on internally displaced persons (IDPs), the dynamics of forced migration on a mass scale within this country are little known beyond national borders.   The authors of this commentary are embarking on a global mental health research program in Bogota, Colombia to define best practices for reaching the displaced population and implementing sustainable, evidence-based screening and intervention for common mental disorders. Presenting the defining characteristics of internal displacement in Colombia provides the context for our work and, more importantly, conveys the compelling and complex nature of this humanitarian crisis. We attempt to demonstrate Colombia's unique position within the global patterning of internal displacement.

  5. Response functions of atom gravimeters

    CERN Document Server

    Nagornyi, V D

    2012-01-01

    Atom gravimeters are equivalent to non-multi-level corner-cube gravimeters in translating the gravity signal into the measurement result. This enables description of atom gravimeters as LTI systems. The system's impulse responses by acceleration, velocity, and displacement are found to have the shape of triangle, meander, and the Dirac comb resp. The effects of inhomogeneous gravity field are studied for constant and linear vertical gradients and self-attraction of the instrument. For the constant gradient the effective measurement height is below the top of the trajectory at 1/6 and 7/24 of its length for the fountain and the release types of the instruments resp. The analysis is expanded to the gravimeters implementing the Bloch oscillations at the apex of the trajectory. In filtering the vibrations these instruments are equivalent to the first-order low-pass filters, while other atom gravimeters are equivalent to the second-order low-pass filters.

  6. Variable displacement alpha-type Stirling engine

    Science.gov (United States)

    Homutescu, V. M.; Bălănescu, D. T.; Panaite, C. E.; Atanasiu, M. V.

    2016-08-01

    The basic design and construction of an alpha-type Stirling engine with on load variable displacement is presented. The variable displacement is obtained through a planar quadrilateral linkage with one on load movable ground link. The physico-mathematical model used for analyzing the variable displacement alpha-type Stirling engine behavior is an isothermal model that takes into account the real movement of the pistons. Performances and power adjustment capabilities of such alpha-type Stirling engine are calculated and analyzed. An exemplification through the use of the numerical simulation was performed in this regard.

  7. Etiopathogenesis of abomasal displacement in cattle

    OpenAIRE

    Šamanc Horea; Damnjanović Z.; Janković Dušan; Vujanac I.; Radaković Radomir; Mandić L.

    2003-01-01

    Abomasal displacement presents topographic gastropathy, where this organ has changed its position, and there is simultaneous dilatation which can vary in intensity. The incidence of this disorder in herds of high-yield dairy cows varies to a great degree (1 to 18 %). Abomasal displacement was established in herds of East-Frisian cows in 1 to 3% animals, and in Holstein cow herds in 5 to 18 % animals. The most frequent abomasal displacement is to the left (88%). There is significant seasonal v...

  8. Displacement and deformation analysis for uplift piles

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    On the assumptions that the shear resistance increases linearly with increasing shear displacement between the uplift pile and surrounding soil,that the axis force is distributed as parabola along the pile length,that elastic distortion occurs when the pile is loaded,that the displacement of pile is in accord with that of the soil,and that the uplift pile failure is regarded as the soil failure,arational calculation method was proposed for calculating the deformation,ultimate displacement and shear resistance of piles.The distributions of frictional resistance and the shear displacement along the pile length were obtained with the method.The comparisons were made between the measurement results and the present results.The present theoretical results agree well with the measurement results,with the average difference being less than 12% before failure.The comparisons show that the proposed method is reasonable for uplift design and engineering construction of piles.

  9. Assisting the return of displaced Dinka Bor

    Directory of Open Access Journals (Sweden)

    Paul Murphy

    2005-11-01

    Full Text Available The issues involved in supporting the return of internally displaced Dinka Bor communities highlight the complex, and often ignored, challenges of addressing the consequencesof South-South conflict.

  10. Epitaxial growth by monolayer restricted galvanic displacement

    Directory of Open Access Journals (Sweden)

    Vasilić Rastko

    2012-01-01

    Full Text Available The development of a new method for epitaxial growth of metals in solution by galvanic displacement of layers pre-deposited by underpotential deposition (UPD was discussed and experimentally illustrated throughout the lecture. Cyclic voltammetry (CV and scanning tunneling microscopy (STM are employed to carry out and monitor a “quasi-perfect”, two-dimensional growth of Ag on Au(111, Cu on Ag(111, and Cu on Au(111 by repetitive galvanic displacement of underpotentially deposited monolayers. A comparative study emphasizes the displacement stoichiometry as an efficient tool for thickness control during the deposition process and as a key parameter that affects the deposit morphology. The excellent quality of layers deposited by monolayer-restricted galvanic displacement is manifested by a steady UPD voltammetry and ascertained by a flat and uniform surface morphology maintained during the entire growth process.

  11. Atomic theories

    CERN Document Server

    Loring, FH

    2014-01-01

    Summarising the most novel facts and theories which were coming into prominence at the time, particularly those which had not yet been incorporated into standard textbooks, this important work was first published in 1921. The subjects treated cover a wide range of research that was being conducted into the atom, and include Quantum Theory, the Bohr Theory, the Sommerfield extension of Bohr's work, the Octet Theory and Isotopes, as well as Ionisation Potentials and Solar Phenomena. Because much of the material of Atomic Theories lies on the boundary between experimentally verified fact and spec

  12. Interactions between displacement cascades and Σ3 tilt grain boundaries in Cu

    Science.gov (United States)

    Li, Bo; Long, Xiao-Jiang; Shen, Zhao-Wu; Luo, Sheng-Nian

    2016-12-01

    With large-scale molecular dynamics simulations, we investigate systematically the interaction of displacement cascades with a set of Σ3 tilt grain boundaries (GBs) in Cu bicrystals at low ambient temperatures, as regards irradiation-induced defect production/absorption and GB migration/faceting. Except for coherent twin boundary, GBs exhibit pronounced preferential absorption of interstitials, which depends on initial primary knock-on atom distance from GB plane and inclination angle. GB migration occurs when displacement cascades overlap with a GB plane, as induced by recrystallization of thermal spike, and concurrent asymmetric grain growth. Faceting occurs via expanding coherent twin boundaries for asymmetric GBs.

  13. 2014 and beyond: implications for displacement

    Directory of Open Access Journals (Sweden)

    Aidan O’Leary

    2014-05-01

    Full Text Available 2014 marks a watershed for Afghanistan, with the withdrawal of the International Security Assistance Force after twelve years, and the very real risks this withdrawal poses to the capacity of the Afghan state to meet the many internal and external challenges faced by the country. These challenges have significant implications for displaced and returning Afghans and for the potential for displacement in the future.

  14. Monolithically integrated interferometer for optical displacement measurement

    Science.gov (United States)

    Hofstetter, Daniel; Zappe, Hans P.

    1996-01-01

    We discuss the fabrication of a monolithically integrated optical displacement sensors using III-V semiconductor technology. The device is configured as a Michelson interferometer and consists of a distributed Bragg reflector laser, a photodetector and waveguides forming a directional coupler. Using this interferometer, displacements in the 100 nm range could be measured at distances of up to 45 cm. We present fabrication, device results and characterization of the completed interferometer, problems, limitations and future applications will also be discussed.

  15. Attempts to prevent displacement in the occupied Palestinian territories

    OpenAIRE

    Karim Khalil

    2012-01-01

    Prevention has become a strategy increasingly adopted by the humanitarian community in addressing forced displacement in the occupied Palestinian territories, as well as responding to immediate emergency needs for families displaced or at risk of displacement.

  16. Elastic-wave generation in the evolution of displacement peaks

    Energy Technology Data Exchange (ETDEWEB)

    Zhukov, V.P.; Boldin, A.A.

    1988-06-01

    This paper investigated the character of elastic shock wave generation and damping in irradiated materials along with the possibility of their long-range influence on the structure of the irradiated materials. Dispersion at the elastoplastic stage of atomic displacement peak development was taken into account. The three-dimensional nonlinear wave was described by an equation in the approximation of weak nonlinearity and weak spatial dispersion. Numerical modeling of the propagation of a plane shock wave in a crystal lattice was conducted. The distribution of the density and mass velocity of the material at the instant of complete damping of the plastic shock-wave component was determined. The appearance of solitary waves (solitons) at large amplitudes, localized in space, which propagate without distortion to arbitrary distances and retain their amplitude and form in interacting with one another, was investigated. Some physical consequences of the influence of solitary waves on the irradiated materials were considered.

  17. Photonic Band Gap Structures with Periodically Arranged Atoms in a Two-Dimensional Photonic Crystal

    Institute of Scientific and Technical Information of China (English)

    LI Zhi-Yu; CHEN Fang; ZHOU Jian-Ying

    2005-01-01

    @@ Linear transmission, reflection and absorption spectra for a new two-dimensional photonic crystal with periodically arranged resonant atoms are examined. Numerical results show that a twin-gap structure with forbidden bands displaced from a non-doped bandgap structure can be produced as a result of atomic polarization. The absorption spectrum is also significantly altered compared to the single atom entity.

  18. Digital atomic force microscope Moire method

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.-M. [Department of Mechanical Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Chen, L.-W. [Department of Mechanical Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China)]. E-mail: chenlw@mail.ncku.edu.tw

    2004-11-15

    In this study, a novel digital atomic force microscope (AFM) moire method is established to measure the displacement and strain fields. The moire pattern is generated by the interference between the specimen grating and the virtual reference grating formed by digital image processes. The overlapped image is filtered by the 2-D wavelet transformation to obtain clear interference moire patterns. From moire patterns, the displacement and strain fields can be analyzed. The experimental results show that the digital AFM moire method is very sensitive and easy to realize in nanoscale measurements.

  19. Quantification of the vocal folds’ dynamic displacements

    Science.gov (United States)

    del Socorro Hernández-Montes, María; Muñoz, Silvino; De La Torre, Manuel; Flores, Mauricio; Pérez, Carlos; Mendoza-Santoyo, Fernando

    2016-05-01

    Fast dynamic data acquisition techniques are required to investigate the motional behavior of the vocal folds (VFs) when they are subjected to a steady air-flow through the trachea. High-speed digital holographic interferometry (DHI) is a non-invasive full-field-of-view technique that has proved its usefulness to study rapid and non-repetitive object movements. Hence it is an ideal technique used here to measure VF displacements and vibration patterns at 2000 fps. Analyses from a set of 200 displacement images showed that VFs’ vibration cycles are established along their width (y) and length (x). Furthermore, the maximum deformation for the right and left VFs’ area may be quantified from these images, which in itself represents an important result in the characterization of this structure. At a controlled air pressure, VF displacements fall within the range ~100-1740 nm, with a calculated precision and accuracy that yields a variation coefficient of 1.91%. High-speed acquisition of full-field images of VFs and their displacement quantification are on their own significant data in the study of their functional and physiological behavior since voice quality and production depend on how they vibrate, i.e. their displacement amplitude and frequency. Additionally, the use of high speed DHI avoids prolonged examinations and represents a significant scientific and technological alternative contribution in advancing the knowledge and working mechanisms of these tissues.

  20. Fingering phenomena during grain-grain displacement

    Science.gov (United States)

    Mello, Nathália M. P.; Paiva, Humberto A.; Combe, G.; Atman, A. P. F.

    2016-05-01

    Spontaneous formation of fingered patterns during the displacement of dense granular assemblies was experimentally reported few years ago, in a radial Hele-Shaw cell. Here, by means of discrete element simulations, we have recovered the experimental findings and extended the original study to explore the control parameters space. In particular, using assemblies of grains with different geometries (monodisperse, bidisperse, or polydisperse), we measured the macroscopic stress tensor in the samples in order to confirm some conjectures proposed in analogy with Saffman-Taylor viscous fingering phenomena for immiscible fluids. Considering an axial setup which allows to control the discharge of grains and to follow the trajectory and the pressure gradient along the displacing interface, we have applied the Darcy law for laminar flow in fluids in order to measure an "effective viscosity" for each assembly combination, in an attempt to mimic variation of the viscosity ratio between the injected/displaced fluids in the Saffman-Taylor experiment. The results corroborate the analogy with the viscous fluids displacement, with the bidisperse assembly corresponding to the less viscous geometry. But, differently to fluid case, granular fingers only develop for a specific combination of displaced/injected geometries, and we have demonstrated that it is always related with the formation of a force chain network along the finger direction.

  1. Atomic physics

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, A.E.; Kukla, K.; Cheng, S. [Univ. of Toledo, OH (United States)] [and others

    1995-08-01

    In a collaboration with the Atomic Physics group at Argonne and the University of Toledo, the Atomic Physics group at the University of Notre Dame is measuring the fine structure transition energies in highly-charged lithium-like and helium-like ions using beam-foil spectroscopy. Precise measurements of 2s-2p transition energies in simple (few-electron) atomic systems provide stringent tests of several classes of current atomic- structure calculations. Analyses of measurements in helium-like Ar{sup 16+} have been completed, and the results submitted for publication. A current goal is to measure the 1s2s{sup 3}S{sub 1} - 1s2p{sup 3}P{sub 0} transition wavelength in helium-like Ni{sup 26+}. Measurements of the 1s2s{sup 2}S{sub 1/2} - 1s2p{sup 2}P{sub 1/2,3/2} transition wavelengths in lithium-like Kr{sup 33+} is planned. Wavelength and lifetime measurements in copper-like U{sup 63+} are also expected to be initiated. The group is also participating in measurements of forbidden transitions in helium-like ions. A measurement of the lifetime of the 1s2s{sup 3}S{sub 1} state in Kr{sup 34+} was published recently. In a collaboration including P. Mokler of GSI, Darmstadt, measurements have been made of the spectral distribution of the 2E1 decay continuum in helium-like Kr{sup 34+}. Initial results have been reported and further measurements are planned.

  2. Forced displacement and women's security in Colombia.

    Science.gov (United States)

    Meertens, Donny

    2010-04-01

    In the protracted Colombian conflict, assistance to internally displaced persons has developed in the context of contradictory political processes. The Colombian government's launching of a transitional justice process in the midst of armed conflict has generated a complex situation displaying both conflict and post-conflict characteristics. The progressive Constitutional Court rulings on internal displacement, in particular the gender-sensitive Auto 092, constitute an attempt to bring together humanitarian interventions and transitional justice measures in a rights-based framework. However, the national government is reluctant to adopt them fully and local realities still hamper their integrated implementation. Displaced women, therefore, remain in an especially vulnerable position. This paper argues that gender-sensitive humanitarian interventions must take into account all of these complexities of scale and political process in order to make legal frameworks more effective at the local level. In these contexts, interventions should pay particular attention to strategies that contribute to transforming pre-existing gender regimes.

  3. Miscible, porous media displacements with density stratification.

    Science.gov (United States)

    Riaz, Amir; Meiburg, Eckart

    2004-11-01

    High accuracy, three-dimensional numerical simulations of miscible displacements with gravity override, in both homogeneous and heterogeneous porous media, are discussed for the quarter five-spot configuration. The influence of viscous and gravitational effects on the overall displacement dynamics is described in terms of the vorticity variable. Density differences influence the flow primarily by establishing a narrow gravity layer, in which the effective Peclet number is enhanced due to the higher flow rate. Although this effect plays a dominant role in homogeneous flows, it is suppressed to some extent in heterogeneous displacements. This is a result of coupling between the viscous and permeability vorticity fields. When the viscous wavelength is much larger than the permeability wavelength, gravity override becomes more effective because coupling between the viscous and permeability vorticity fields is less pronounced. Buoyancy forces of a certain magnitude can lead to a pinch-off of the gravity layer, thereby slowing it down.

  4. Performance of displacement ventilation in practice

    DEFF Research Database (Denmark)

    Naidenov, K.; Pitchurov, G.; Langkilde, Gunnar

    2002-01-01

    This paper presents results of a field study in offices with displacement ventilation. It comprises detailed physical measurements of the thermal environment and collection of occupants´ response at 227 workplaces. The results, both physical measurements and human response, identified draught...... as the major local discomfort in the rooms with displacement ventilation. Twenty-three percent of the occupants were daily bothered by draught. In some buildings the maintenance personnel tried to improve occupants´ thermal comfort by raising the supply air temperature or office workers themselves blocked...... the diffusers by rearranging the furniture. Half of the surveyed occupants were not satisfied with the indoor air quality. The main conclusion is that displacement ventilation needs careful design and room furnishing in order to ensure a comfortable environment. Occupants must understand the underlying...

  5. DISPLACEMENT CONTROL AND KINETIC ANALYSIS OF A NOVEL VARIABLE DISPLACEMENT COMPRESSOR FOR AUTOMOTIVE AIR CONDITIONER

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A novel variable displacement compressor (VDC) for automotive air conditioner (AAC) is introduced, which inherits the advantages of common wobble plate type VDC. It has fewer parts and makes less noise, and inst ead of pneumatic valve the displacement is controlled by electronic control valv e. In order to know the control mechanism well and get a good control effect, a mathematical model for the variable displacement mechanism is developed accordin g to the geometrical and kinematical information of the compressor. Using the mo del, the effect of relevant parameters on variable displace control is estimated . It is helpful to make the optimum decision in the flow control of AAC. As the novel displacement control device, the structure and control rule of electronic control valve is introduced. It can get better effect than the conventional pneu matic valves. And by using this new electronic control device, the optimum syste mic control of AAC is available.

  6. The Costs of Displacement in Brazil

    OpenAIRE

    Naercio Menezes-Filho

    2004-01-01

    This paper uses new data that combines information on workers’ education and earnings trajectories with information about their firms to estimate the costs of job displacement in Brazil. We find that high-tenure workers displaced from their firms during mass lay-offs suffer a long-term loss in monthly wages of about 20% per year. We show that this result is robust to different treatment of workers that leave the formal sector of the economy and is driven by the losses suffered by more educa...

  7. Histone displacement during nucleotide excision repair

    DEFF Research Database (Denmark)

    Dinant, C.; Bartek, J.; Bekker-Jensen, S.

    2012-01-01

    Nucleotide excision repair (NER) is an important DNA repair mechanism required for cellular resistance against UV light and toxic chemicals such as those found in tobacco smoke. In living cells, NER efficiently detects and removes DNA lesions within the large nuclear macromolecular complex called...... of histone variants and histone displacement (including nucleosome sliding). Here we review current knowledge, and speculate about current unknowns, regarding those chromatin remodeling activities that physically displace histones before, during and after NER. © 2012 by the authors; licensee MDPI, Basel...

  8. Maxillary tooth displacement in the infratemporal fossa

    Directory of Open Access Journals (Sweden)

    Korosh Roshanghias

    2016-01-01

    Full Text Available Wisdom tooth operations are sometimes accompanied by complications. This case report shows complications during upper jaw third molar removal. Expectable problems during oral surgery should be planned to be solved in advance. Displacement of the third molar during oral surgeries as a considerable complication is rarely discussed scientifically. A good design of flap, adequate power for extraction, and clear view on the surgical field are crucial. Three-dimensional radiographic diagnostics in terms of cone beam computed tomography is helpful after tooth displacement into the infratemporal fossa.

  9. Bucket Foundation Response Under Various Displacement Rates

    DEFF Research Database (Denmark)

    Vaitkunaite, Evelina; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2016-01-01

    in a multi-bucket foundation system. The foundation model is at a scale of approximately 1:20 prototype foundation size. The tests are performed in a pressure tank with the foundation model installed in dense sand. Based on the data, the conclusion is that the bucket foundation design in a storm case should......The present testing program aims at showing the pore pressure response around a bucket foundation skirt as well as the load and displacement change due to ten different displacement rates. Research findings are useful for a numerical model calibration focusing on the design of the upwind foundation...

  10. Passive Smoking in a Displacement Ventilated Room

    DEFF Research Database (Denmark)

    Bjørn, Erik; Nielsen, Peter V.

    The aim of this research is to see if the displacement ventilation principle can protect a person from exposure to passive tobacco smoking. This is done by full-scale experiments with two breathing thermal manikins, smoke visualisations, and tracer gas measurements. In some situations, exhaled...... smoke will stratify in a certain height due to the vertical temperature gradient. This horizontal layer of exhaled tobacco smoke may lead to exposure. In other situations, the smoke is mixed into the upper zone, and the passive smoker is protected to some extent by the displacement principle...

  11. Personal Exposure in Displacement Ventilated Rooms

    DEFF Research Database (Denmark)

    Brohus, Henrik; Nielsen, Peter Vilhelm

    1996-01-01

    Personal exposure in a displacement ventilated room is examined. The stratified flow and the considerable concentration gradients necessitate an improvement of the widely used fully mixing compartmental approach. The exposure of a seated and a standing person in proportion to the stratification...... in the lower part of the room close to the occupant. A personal exposure model for displacement ventilated rooms is proposed. The model takes the influence of gradients and the human thermal boundary layer into account. Two new quantities describing the interaction between a person and the ventilation...

  12. The Atomic orbitals of the topological atom

    OpenAIRE

    Ramos-Cordoba, Eloy; Salvador Sedano, Pedro

    2013-01-01

    The effective atomic orbitals have been realized in the framework of Bader's atoms in molecules theory for a general wavefunction. This formalism can be used to retrieve from any type of calculation a proper set of orthonormalized numerical atomic orbitals, with occupation numbers that sum up to the respective Quantum Theory of Atoms in Molecules (QTAIM) atomic populations. Experience shows that only a limited number of effective atomic orbitals exhibit significant occupation numbers. These c...

  13. 24 CFR 42.350 - Relocation assistance for displaced persons.

    Science.gov (United States)

    2010-04-01

    ... described in 49 CFR part 24. A displaced person must be advised of his or her rights under the Fair Housing... of 1974 § 42.350 Relocation assistance for displaced persons. A displaced person may choose to... safety of the person or the public; or (2) The person is displaced from a “lower-income dwelling...

  14. 24 CFR 92.353 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... U.S.C. 4201-4655) and 49 CFR part 24. A “displaced person” must be advised of his or her rights... assistance for displaced persons—(1) General. A displaced person (defined in paragraph (c)(2) of this section..., safe, and sanitary replacement dwellings not located in such areas. (2) Displaced Person. (i)...

  15. 24 CFR 882.810 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... CFR 24.2(g)(2); or (iv) HUD determines that the person was not displaced as a direct result of... section. (c) Relocation assistance for displaced persons. A “displaced person” (defined in paragraph (g... displaced person must be advised of his or her rights under the Fair Housing Act (42 U.S.C. 3601-19) and,...

  16. Oxygen Displacement in Cuprates under Ionic Liquid Field-Effect Gating

    Science.gov (United States)

    Dubuis, Guy; Yacoby, Yizhak; Zhou, Hua; He, Xi; Bollinger, Anthony T.; Pavuna, Davor; Pindak, Ron; Božović, Ivan

    2016-08-01

    We studied structural changes in a 5 unit cell thick La1.96Sr0.04CuO4 film, epitaxially grown on a LaSrAlO4 substrate with a single unit cell buffer layer, when ultra-high electric fields were induced in the film by applying a gate voltage between the film (ground) and an ionic liquid in contact with it. Measuring the diffraction intensity along the substrate-defined Bragg rods and analyzing the results using a phase retrieval method we obtained the three-dimensional electron density in the film, buffer layer, and topmost atomic layers of the substrate under different applied gate voltages. The main structural observations were: (i) there were no structural changes when the voltage was negative, holes were injected into the film making it more metallic and screening the electric field; (ii) when the voltage was positive, the film was depleted of holes becoming more insulating, the electric field extended throughout the film, the partial surface monolayer became disordered, and equatorial oxygen atoms were displaced towards the surface; (iii) the changes in surface disorder and the oxygen displacements were both reversed when a negative voltage was applied; and (iv) the c-axis lattice constant of the film did not change in spite of the displacement of equatorial oxygen atoms.

  17. Britain's Redundancy Payments for Displaced Workers.

    Science.gov (United States)

    Root, Lawrence S.

    1987-01-01

    The Redundancy Payments Act of 1965 established the idea that an employee has property rights to a job based on years of company service. It instituted an entitlement program for displaced workers sponsored by firms and the government. The British layoff situtation differs from that of the United States. (Author/CH)

  18. Olympic scale of sport-induced displacement

    Directory of Open Access Journals (Sweden)

    Jean du Plessis

    2007-07-01

    Full Text Available The Olympic Games have displaced more than two million people in the last 20 years, disproportionately affecting particular groups such as the homeless, the poor, Roma and African-Americans. Mega-events such as the Olympic Games often leave a negative housing legacy for local populations.

  19. Comb-drive actuators for large displacements

    NARCIS (Netherlands)

    Legtenberg, Rob; Groeneveld, A.W.; Elwenspoek, M.

    1996-01-01

    The design, fabrication and experimental results of lateral-comb-drive actuators for large displacements at low driving voltages is presented. A comparison of several suspension designs is given, and the lateral large deflection behaviour of clamped - clamped beams and a folded flexure design is mod

  20. Heterodyne displacement interferometer, insensitive for input polarization

    NARCIS (Netherlands)

    Meskers, A.J.H.; Spronck, J.W.; Munnig Schmidt, R.H.

    2014-01-01

    Periodic nonlinearity (PNL) in displacement interferometers is a systematic error source that limits measurement accuracy. The PNL of coaxial heterodyne interferometers is highly influenced by the polarization state and orientation of the source frequencies. In this Letter, we investigate this error

  1. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a small-scal

  2. Displacing Media: LCD LAB Artistic Residency

    Directory of Open Access Journals (Sweden)

    Filipe Pais

    2012-12-01

    Full Text Available This review refers to an artistic residency which took place at LCD LAB -  CAAA at Guimarães, in March, exploring a strategy for media art called Media Displacement. The text introduces the strategy very briefly and describes the residency's organization, structure, processses and the results produced.

  3. A new method for angular displacement measurement

    Institute of Scientific and Technical Information of China (English)

    Caini Zhang(张彩妮); Xiangzhao Wang(王向朝)

    2003-01-01

    We describe a new method for angular displacement measurements that is based on a Fabry-Perot inter-ferometer. A measurement accuracy of 10-s rad is obtained by use of the sinusoidal phase modulatinginterferometry. Another Fabry-Perot interferometer is used to obtain the key initial angle of incidence.

  4. A Personal Appearance Program for Displaced Homemakers.

    Science.gov (United States)

    Fiore, Ann Marie; De Long, Marilyn Revell

    1990-01-01

    A career counseling program evaluated the self-esteem of 28 displaced homemakers, then presented 3 sessions on the importance of personal appearance in hiring practices, wardrobe management, nonverbal communication, professional image, and self-concept. Analysis of participant evaluations indicated improved levels of control and confidence and…

  5. Displacement Ventilation by Different Types of Diffusers

    DEFF Research Database (Denmark)

    Nielsen, Peter V.; Hoff, Lars; Pedersen, Lars Germann

    The paper describes measuring results of the air movement from three different types of diffusers for displacement ventilation. Two of the diffusers are lowlevel wall mounted diffusers, one with a low and one with a high initial entrainment. The third diffuser is of the floor mounted type....

  6. Atom Skimmers and Atom Lasers Utilizing Them

    Science.gov (United States)

    Hulet, Randall; Tollett, Jeff; Franke, Kurt; Moss, Steve; Sackett, Charles; Gerton, Jordan; Ghaffari, Bita; McAlexander, W.; Strecker, K.; Homan, D.

    2005-01-01

    Atom skimmers are devices that act as low-pass velocity filters for atoms in thermal atomic beams. An atom skimmer operating in conjunction with a suitable thermal atomic-beam source (e.g., an oven in which cesium is heated) can serve as a source of slow atoms for a magneto-optical trap or other apparatus in an atomic-physics experiment. Phenomena that are studied in such apparatuses include Bose-Einstein condensation of atomic gases, spectra of trapped atoms, and collisions of slowly moving atoms. An atom skimmer includes a curved, low-thermal-conduction tube that leads from the outlet of a thermal atomic-beam source to the inlet of a magneto-optical trap or other device in which the selected low-velocity atoms are to be used. Permanent rare-earth magnets are placed around the tube in a yoke of high-magnetic-permeability material to establish a quadrupole or octupole magnetic field leading from the source to the trap. The atoms are attracted to the locus of minimum magnetic-field intensity in the middle of the tube, and the gradient of the magnetic field provides centripetal force that guides the atoms around the curve along the axis of the tube. The threshold velocity for guiding is dictated by the gradient of the magnetic field and the radius of curvature of the tube. Atoms moving at lesser velocities are successfully guided; faster atoms strike the tube wall and are lost from the beam.

  7. Tunable axial potentials for atom chip waveguides

    CERN Document Server

    Stickney, James A; Imhof, Eric; Kroese, Bethany R; Crow, Jonathon A R; Olson, Spencer E; Squires, Matthew B

    2014-01-01

    We present a method for generating algebraically precise magnetic potentials along the axis of a cold atom waveguide near the surface of an atom chip. With a single chip design consisting of several wire pairs, various axial potentials can be created, including double wells, triple wells, and pure harmonic traps with suppression of higher order terms. We characterize the error along a harmonic trap between the expected algebraic form and magnetic field simulations and find excel- lent agreement, particularly at small displacements from the trap center. Finally, we demonstrate experimental control over the bottom fields of an asymmetric double well potential.

  8. Drinking and displacement: a systematic review of the influence of forced displacement on harmful alcohol use.

    Science.gov (United States)

    Weaver, Heather; Roberts, Bayard

    2010-11-01

    This paper systematically reviews evidence about factors associated with harmful alcohol use amongst forcibly displaced persons, including refugees and internally displaced persons. Bibliographic and humanitarian-related databases were searched. The number of quantitative and qualitative studies that were screened and reviewed was 1108. Only 10 studies met inclusion criteria. Risk factors identified included gender, age, exposure to traumatic events and resulting posttraumatic stress disorder, prior alcohol consumption-related problems, year of immigration, location of residence, social relations, and postmigration trauma and stress. The evidence base was extremely weak, and there is a need to improve the quantity and quality of research about harmful alcohol use by forcibly displaced persons.

  9. Utilization of an ultrasound beam steering angle for measurements of tissue displacement vector and lateral displacement

    Directory of Open Access Journals (Sweden)

    Chikayoshi Sumi

    2010-09-01

    Full Text Available Chikayoshi SumiDepartment of Information and Communication Sciences, Faculty of Science and Technology, Sophia University, Tokyo, JapanAbstract: A number of ultrasonic displacement/velocity measurement methods have been extensively developed for measurements of blood flow, tissue motion, and strain. Lateral modulation (LM methods have also been reported using steered, crossed beams, and these methods permit measurements of displacement vectors. In this report, a new beam steering method for the transmission and reception of ultrasound is proposed, which can enable measurements of lateral displacements and of arbitrary displacement vectors with a very high degree of accuracy. Because this beam steering method uses only a steering angle, this method is referred to as ASTA. With ASTA, the number of available methods to obtain a displacement vector measurement is limited to previously developed block-matching methods, such as the multidimensional cross-spectrum phase gradient method, and the multidimensional autocorrelation method (MAM and the multidimensional Doppler method (MDM using a block-matching method (the methods using block matching are referred to as MAMb and MDMb, respectively. Being dependent on the measurement method, only a lateral displacement measurement can be made even if the methods are multidimensional, ie, previously developed MAM and MDM using a moving average and a mirror setting of the obtained steered beams, and one-dimensional (1D, such as an autocorrelation method. Considerations of beamforming schemes using LM and ASTA show that the simple ASTA beamforming method increases capabilities for real-time measurements and requires a small physical aperture when compared with LM. For lateral displacement measurements (eg, blood flow in a carotid artery, a lateral coordinate must correspond to the direction of the target’s lateral motion, and the steering angle used is as large as possible to increase the measurement accuracy

  10. Atomic magnetometer

    Science.gov (United States)

    Schwindt, Peter [Albuquerque, NM; Johnson, Cort N [Albuquerque, NM

    2012-07-03

    An atomic magnetometer is disclosed which uses a pump light beam at a D1 or D2 transition of an alkali metal vapor to magnetically polarize the vapor in a heated cell, and a probe light beam at a different D2 or D1 transition to sense the magnetic field via a polarization rotation of the probe light beam. The pump and probe light beams are both directed along substantially the same optical path through an optical waveplate and through the heated cell to an optical filter which blocks the pump light beam while transmitting the probe light beam to one or more photodetectors which generate electrical signals to sense the magnetic field. The optical waveplate functions as a quarter waveplate to circularly polarize the pump light beam, and as a half waveplate to maintain the probe light beam linearly polarized.

  11. High Atom Number in Microsized Atom Traps

    Science.gov (United States)

    2015-12-14

    Final Performance Report on ONR Grant N00014-12-1-0608 High atom number in microsized atom traps for the period 15 May 2012 through 14 September...TYPE Final Technical Report 3. DATES COVERED (From - To) 05/15/2012-09/14/2012 4. TITLE AND SUBTITLE High atom number in microsized atom traps...forces for implementing a small-footprint, large-number atom -chip instrument. Bichromatic forces rely on absorption and stimulated emission to produce

  12. Displacement damage and transmutations in metals under neutron and proton irradiation; Dommage de deplacements et transmutations dans les metaux sous irradiation de neutrons et de protons

    Energy Technology Data Exchange (ETDEWEB)

    Vladimirov, P. [FZK, Institute of Materials Research I, Karlsruhe (Germany); Bouffard, S. [CEA/DRECAM, Centre interdisciplinaire de recherche ions lasers (CIRIL), 14 - Caen (France)

    2008-04-15

    The knowledge of the defect and impurity generation rates, as well as the defect spatial distribution, is the corner stone for the understanding of the evolution of material properties under irradiation. This knowledge is also an essential element for comprehensive experimental simulations of the behavior of irradiated materials. In this article the interaction of neutron and proton irradiation with metals is discussed with respect to displacement damage production. Charged particle irradiation is also briefly illustrated. After discussion of the primary interaction of projectiles (neutrons, charged particles in general, and protons in particular) with target atoms/nuclei, we describe the interaction of a recoil atom with other target atoms resulting in the slowing down of the projectile, displacement damage, impurity atom production due to nuclear reactions, and the creation of atomic displacement cascades. Then the further evolution of defect structure is discussed. The next section, devoted to sub-cascade formation, is divided into two parts. The first experimental evidence of sub-cascade formation under neutron and charged particle irradiation is presented. Then the models of sub-cascade formation are described. Finally we review the models for the calculation of displacement damage and show how these models can be applied to displacement damage calculation under neutron irradiation with a demonstration of a real application of the methods discussed to several nuclear facilities. (authors)

  13. Precision optical displacement measurements using biphotons

    CERN Document Server

    Lyons, Kevin; Kwiat, Paul G; Jordan, Andrew N

    2016-01-01

    We propose and examine the use of biphoton pairs, such as those created in parametric down conversion or four-wave mixing, to enhance the precision and the resolution of measuring optical displacements by position-sensitive detection. We show that the precision of measuring a small optical beam displacement with this method can be significantly enhanced by the correlation between the two photons, given the same optical mode. The improvement is largest if the correlations between the photons are strong, and falls off as the biphoton correlation weakens. More surprisingly, we find that the smallest resolvable parameter of a simple split detector scales as the inverse of the number of biphotons for small biphoton number ("Heisenberg scaling"), because the Fisher information diverges as the parameter to be estimated decreases in value. One usually sees this scaling only for systems with many entangled degrees of freedom. We discuss the transition for the split-detection scheme to the standard quantum limit scalin...

  14. Charge-displacement analysis for excited states

    Energy Technology Data Exchange (ETDEWEB)

    Ronca, Enrico, E-mail: enrico@thch.unipg.it; Tarantelli, Francesco, E-mail: francesco.tarantelli@unipg.it [Istituto CNR di Scienze e Tecnologie Molecolari, via Elce di Sotto 8, I-06123 Perugia (Italy); Dipartimento di Chimica, Biologia e Biotecnologie, Università degli Studi di Perugia, via Elce di Sotto 8, I-06123 Perugia (Italy); Pastore, Mariachiara, E-mail: chiara@thch.unipg.it; Belpassi, Leonardo; De Angelis, Filippo [Istituto CNR di Scienze e Tecnologie Molecolari, via Elce di Sotto 8, I-06123 Perugia (Italy); Angeli, Celestino; Cimiraglia, Renzo [Dipartimento di Scienze Chimiche e Farmaceutiche, Università degli Studi di Ferrara, via Borsari 46, I-44100 Ferrara (Italy)

    2014-02-07

    We extend the Charge-Displacement (CD) analysis, already successfully employed to describe the nature of intermolecular interactions [L. Belpassi et al., J. Am. Chem. Soc. 132, 13046 (2010)] and various types of controversial chemical bonds [L. Belpassi et al., J. Am. Chem. Soc. 130, 1048 (2008); N. Salvi et al., Chem. Eur. J. 16, 7231 (2010)], to study the charge fluxes accompanying electron excitations, and in particular the all-important charge-transfer (CT) phenomena. We demonstrate the usefulness of the new approach through applications to exemplary excitations in a series of molecules, encompassing various typical situations from valence, to Rydberg, to CT excitations. The CD functions defined along various spatial directions provide a detailed and insightful quantitative picture of the electron displacements taking place.

  15. Intrinsic Mean Square Displacements in Proteins

    OpenAIRE

    VURAL, Derya; Glyde, Henry R.

    2012-01-01

    The thermal mean square displacement (MSD) of hydrogen in proteins and its associated hydration water is measured by neutron scattering experiments and used an indicator of protein function. The observed MSD as currently determined depends on the energy resolution width of the neutron scattering instrument employed. We propose a method for obtaining the intrinsic MSD of H in the proteins, one that is independent of the instrument resolution width. The intrinsic MSD is defined as the infinite ...

  16. Experiments on chemically enhanced immiscible fluid displacements

    Science.gov (United States)

    Soori, Tejaswi; Ward, Thomas

    2016-11-01

    This talk focuses on experiments conducted by displacing a vegetable oil within a capillary tube (diameter forms a stable micro-emulsion. We estimate the shear viscosity of the emulsion as a function of alkali and aqueous/oil concentrations. Separately we attempt to measure the average bulk diffusion coefficient of the emulsion in both phases which is necessary to estimate the Péclet number (Pé) and subsequent mass transport phenomena. American Chemical Society Petroleum Research Fund.

  17. Cooling airflow design tool for displacement ventilation.

    OpenAIRE

    Schiavon, Stefano; Bauman, Fred

    2009-01-01

    These user notes describe how to use a spreadsheet-based (Excel 2007) version of the ASHRAE method (Chen and Glicksman 2003) for calculating the amount of design cooling airflow required for a displacement ventilation (DV) system that is providing all sensible cooling for a conditioned space. The design tool has been developed by CBE and is available on the CBE Partner website: http://www.cbe.berkeley.edu/partners/downloads.php

  18. A reference material for dynamic displacement calibration

    Science.gov (United States)

    Davighi, A.; Hack, E.; Patterson, E.; Whelan, M.

    2010-06-01

    Calibration of displacement and strain measurement systems is an essential step in providing traceability and confidence in stress and strain distributions obtained from experiment and used to validate simulations employed in engineering design. Reference materials provide a simple, well-defined distribution of the measured quantity that can be traced to an international standard and can be used to assess the uncertainty associated with the measurement system. Previous work has established a reference material and procedure for calibrating optical systems for measuring static, in-plane strain distributions and also demonstrated its use. A new effort is in progress to extend this work to the measurement of three-dimensional displacement distributions induced by cyclic and dynamic loading, including transients and large-scale deformation. The first step in this effort has been to define both the essential and desirable attributes of a reference material for calibrating systems capable of measurements of dynamic displacement and strain. An international consortium of research laboratories, system designers, manufacturers and end-users has identified a list of attributes and members of the experimental mechanics community have been asked to weight the importance of these attributes. The attributes are being utilised to evaluate candidate designs for the reference material which have been generated through a series of brain-storming sessions within the consortium.

  19. Comparing Teaching Approaches About Maxwell's Displacement Current

    Science.gov (United States)

    Karam, Ricardo; Coimbra, Debora; Pietrocola, Maurício

    2014-08-01

    Due to its fundamental role for the consolidation of Maxwell's equations, the displacement current is one of the most important topics of any introductory course on electromagnetism. Moreover, this episode is widely used by historians and philosophers of science as a case study to investigate several issues (e.g. the theory-experiment relationship). Despite the consensus among physics educators concerning the relevance of the topic, there are many possible ways to interpret and justify the need for the displacement current term. With the goal of understanding the didactical transposition of this topic more deeply, we investigate three of its domains: (1) The historical development of Maxwell's reasoning; (2) Different approaches to justify the term insertion in physics textbooks; and (3) Four lectures devoted to introduce the topic in undergraduate level given by four different professors. By reflecting on the differences between these three domains, significant evidence for the knowledge transformation caused by the didactization of this episode is provided. The main purpose of this comparative analysis is to assist physics educators in developing an epistemological surveillance regarding the teaching and learning of the displacement current.

  20. Digital image correlation: displacement accuracy estimation

    Directory of Open Access Journals (Sweden)

    Wattrisse B.

    2010-06-01

    Full Text Available The aim of this collaborative work is to study the uncertainties associated with Digital Image Correlation techniques (DIC. More specifically, the link between displacement uncertainties and several correlation parameters chosen by the user and relative to the image analysis software and several image characteristics like speckle size and image noise is emphasized. A previous work [1] has been done for situations with spatially fluctuating displacement fields which dealt with mismatch error linked to the discrepancy between the adopted shape function and the real displacement field in the subset. This present work is focused on the ultimate error regime. To ensure that there is no mismatch error, synthetic images of plane rigid body translation have been analysed. DIC softwares developed by or used in the French community were used to study a large number of settings. The first observations are: (a bias amplitude is almost always insensitive to the subset size, (b DIC formulations can be split up into two families. For the first one, the bias amplitude increases with the noise while it remains constant for the second one. For both families, the mean value of the random error increases with the noise level and with the inverse of the subset size. Furthermore, the random error decreases with the radius of the speckle for the first family, while it increases for the second one. These two different behaviours of the tested DIC package are probably due to their underlying DIC formulation (interpolation, correlation criteria, optimisation process.

  1. International Monetary Fund and aid displacement.

    Science.gov (United States)

    Stuckler, David; Basu, Sanjay; McKee, Martin

    2011-01-01

    Several recent papers find evidence that global health aid is being diverted to reserves, education, military, or other sectors, and is displacing government spending. This is suggested to occur because ministers of finance have competing, possibly corrupt, priorities and deprive the health sector of resources. Studies have found that development assistance for health routed to governments has a negative impact on health spending and that similar assistance routed to private nongovernmental organizations has a positive impact. An alternative hypothesis is that World Bank and IMF macro-economic policies, which specifically advise governments to divert aid to reserves to cope with aid volatility and keep government spending low, could be causing the displacement of health aid. This article evaluates whether aid displacement was greater when countries undertook a new borrowing program from the IMF between 1996 and 2006. As found in existing studies, for each $1 of development assistance for health, about $0.37 is added to the health system. However, evaluating IMF-borrowing versus non-IMF-borrowing countries reveals that non-borrowers add about $0.45 whereas borrowers add less than $0.01 to the health system. On average, health system spending grew at about half the speed when countries were exposed to the IMF than when they were not. It is important to take account of the political economy of global health finance when interpreting data on financial flows.

  2. Ultrasonography for non-displaced and mini-displaced humeral lateral condyle fractures in children

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-dong; CHEN Hua

    2008-01-01

    Objective: To evaluate the value of ultrasonography in non-displaced and mini-displaced humeral lateral condyle fractures in children.Methods: Nine children aged 2-9 years with non-displaced or mini-displaced humeral lateral condyle fractures were examined by high-resolution ultrasonography.The fracture line through the joint surface was visualized by ultrasonography in 6 case,in which closed reduction and percutaneous pinning was performed on 3 patients and other 3 patients did not receive the treatment because of patients' or their parents'refusal.In the remaining 3 children,ultrasonography did not reveal the cartilaginous trochle involvement at the joint surface and conservative treatment was adopted.Results: The average follow-up period was 8 months.The sonographic findings were confirmed by magnetic resonance imaging in one child who received conservative treatment and another child who received percutaneous pinning.The elbow function and fractttre healing were good in cases received closed reduction and percutaneous pinning.Among the three cases who refused to receive closed reduction and internal f'txation,re-displacement occurred in 1 case and delayed union in 1 case.All three cases receiving conservative treatment had good results both in elbow function and fracture healing.Conclusion: High-resolution ultrasonography enable to reveal non-displaced and mini-displaced humeral lateral condyle fractures as well as to ascertain whether the cartilaginous trochlea humeri was involved.For these cases,arthrography or magnetic resonance imaging is unnecessary.

  3. The atomic orbitals of the topological atom.

    Science.gov (United States)

    Ramos-Cordoba, Eloy; Salvador, Pedro; Mayer, István

    2013-06-07

    The effective atomic orbitals have been realized in the framework of Bader's atoms in molecules theory for a general wavefunction. This formalism can be used to retrieve from any type of calculation a proper set of orthonormalized numerical atomic orbitals, with occupation numbers that sum up to the respective Quantum Theory of Atoms in Molecules (QTAIM) atomic populations. Experience shows that only a limited number of effective atomic orbitals exhibit significant occupation numbers. These correspond to atomic hybrids that closely resemble the core and valence shells of the atom. The occupation numbers of the remaining effective orbitals are almost negligible, except for atoms with hypervalent character. In addition, the molecular orbitals of a calculation can be exactly expressed as a linear combination of this orthonormalized set of numerical atomic orbitals, and the Mulliken population analysis carried out on this basis set exactly reproduces the original QTAIM atomic populations of the atoms. Approximate expansion of the molecular orbitals over a much reduced set of orthogonal atomic basis functions can also be accomplished to a very good accuracy with a singular value decomposition procedure.

  4. "Bohr's Atomic Model."

    Science.gov (United States)

    Willden, Jeff

    2001-01-01

    "Bohr's Atomic Model" is a small interactive multimedia program that introduces the viewer to a simplified model of the atom. This interactive simulation lets students build an atom using an atomic construction set. The underlying design methodology for "Bohr's Atomic Model" is model-centered instruction, which means the central model of the…

  5. 7 CFR 1944.667 - Relocation and displacement.

    Science.gov (United States)

    2010-01-01

    ... permanent or temporary relocation of displaced persons for units repaired or rehabilitated or for individual... displaced persons. The applicant shall include in its statement of activities, a statement concerning...

  6. HIV and the internally displaced: Burundi in focus

    Directory of Open Access Journals (Sweden)

    Raquel Wexler

    2003-01-01

    Full Text Available "Special attention should also be given to the prevention of contagious and infectious diseases, including AIDS, among internally displaced persons." (Guiding Principles on InternalDisplacement, 19.3

  7. Displacement Mechanism of Polymer Flooding by Molecular Tribology

    Institute of Scientific and Technical Information of China (English)

    YANG Er-Long; SONG Kao-Ping

    2006-01-01

    @@ Whether polymer flooding can enhance displacement efficiency or not is still a problem under debate. Laboratory experiment, numerical simulation and core data analysis are the commonly used means to study polymer flooding displacement efficiency.

  8. Is competition needed for ecological character displacement? Does displacement decrease competition?

    Science.gov (United States)

    Abrams, Peter A; Cortez, Michael H

    2015-12-01

    Interspecific competition for resources is generally considered to be the selective force driving ecological character displacement, and displacement is assumed to reduce competition. Skeptics of the prevalence of character displacement often cite lack of evidence of competition. The present article uses a simple model to examine whether competition is needed for character displacement and whether displacement reduces competition. It treats systems with competing resources, and considers cases when only one consumer evolves. It quantifies competition using several different measures. The analysis shows that selection for divergence of consumers occurs regardless of the level of between-resource competition or whether the indirect interaction between the consumers is competition (-,-), mutualism (+,+), or contramensalism (+,-). Also, divergent evolution always decreases the equilibrium population size of the evolving consumer. Whether divergence of one consumer reduces or increases the impact of a subsequent perturbation of the other consumer depends on the parameters and the method chosen for measuring competition. Divergence in mutualistic interactions may reduce beneficial effects of subsequent increases in the other consumer's population. The evolutionary response is driven by an increase in the relative abundance of the resource the consumer catches more rapidly. Such an increase can occur under several types of interaction.

  9. 24 CFR 583.310 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... persons. A displaced person (defined in paragraph (f) of this section) must be provided relocation... “displaced person,” or the amount of relocation assistance for which the person is eligible, may file a... to the HUD field office. (f) Definition of displaced person. (1) For purposes of this section,...

  10. 24 CFR 941.207 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... CFR part 24. A “displaced person” shall be advised of his/her rights under the Fair Housing Act (42 U... paragraph (b)(1) of this section. (c) Relocation assistance for displaced persons. A “displaced person... and the standards for tenancy established in accordance with 24 CFR 960.204) who will not be...

  11. 24 CFR 886.138 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... regulations at 49 CFR part 24. A “displaced person” shall be advised of his or her rights under the Fair... person is ineligible under 49 CFR 24.2(g)(2); or (iv) HUD determines that the person was not displaced as... persons. A “displaced person” (as defined in paragraph (g) of this section) must be provided...

  12. From Word to Image: Displacement and Meaning in "Greed."

    Science.gov (United States)

    Grindon, Leger

    1989-01-01

    Describes levels of displacement in Stroheim's film "Greed," including (1) the displacement of reason, pleasure, and life by the desire for gold; and (2) the displacement that points to a double movement in Stroheim's cinematic style. Argues that the film's sense of doom arises from the psychic nightmare operating through the mechanics…

  13. Rhetorics of Displacement: Constructing Identities in Forced Relocations

    Science.gov (United States)

    Powell, Katrina M.

    2012-01-01

    Forced displacement has often involved the use of rhetoric, both by government institutions and by people who struggle not only to survive displacement, but also to resist it. In this article, the author offers first a theoretical framework that informs her thinking about displacement narratives. She briefly examines two published displacement…

  14. Year of displaced people’s rights in Colombia

    Directory of Open Access Journals (Sweden)

    Marco Alberto Romero

    2007-12-01

    Full Text Available A Campaign for the Rights of Displaced People in Colombia, launched in 2007 by UNHCR, Colombian NGO CODHES and the Catholic Church, has tried to raise awareness in Colombia and the international community about the severity of the country’s displacement crisis and its failure to guarantee the rights of displaced people.

  15. Two-Domain DNA Strand Displacement

    CERN Document Server

    Cardelli, Luca

    2010-01-01

    We investigate the computing power of a restricted class of DNA strand displacement structures: those that are made of double strands with nicks (interruptions) in the top strand. To preserve this structural invariant, we impose restrictions on the single strands they interact with: we consider only two-domain single strands consisting of one toehold domain and one recognition domain. We study fork and join signal-processing gates based on these structures, and we show that these systems are amenable to formalization and to mechanical verification.

  16. Uncovering deformation processes from surface displacements

    Science.gov (United States)

    Stramondo, Salvatore; Trasatti, Elisa; Albano, Matteo; Moro, Marco; Chini, Marco; Bignami, Christian; Polcari, Marco; Saroli, Michele

    2016-12-01

    Today, satellite remote sensing has reached a key role in Earth Sciences. In particular, Synthetic Aperture Radar (SAR) sensors and SAR Interferometry (InSAR) techniques are widely used for the study of dynamic processes occurring inside our living planet. Over the past 3 decades, InSAR has been applied for mapping topography and deformation at the Earth's surface. These maps are widely used in tectonics, seismology, geomorphology, and volcanology, in order to investigate the kinematics and dynamics of crustal faulting, the causes of postseismic and interseismic displacements, the dynamics of gravity driven slope failures, and the deformation associated with subsurface movement of water, hydrocarbons or magmatic fluids.

  17. Galvanic displacement of metals on semiconductor nanocrystals

    Science.gov (United States)

    Johnson, Melanie; Kelly, Joel A.; Henderson, Eric J.; Veinot, Jonathan G. C.

    2009-11-01

    We report the galvanic displacement (GD) of germanium from germanium nanocrystals (Ge-NCs) with silver. The Ge-NCs are synthesized by reductive thermal processing of germanium suboxide sol-gel prepolymers. Thermal processing yields size-controlled oxide-embedded Ge-NCs, which are liberated by dissolution of the germanium oxide matrix in water. Subsequent exposure of the freestanding Ge-NCs to aqueous solutions of AgNO3 leads to deposition of silver nanostructures by GD. The resulting metal structures were analyzed by XRD, XPS, TEM and EDX, confirming deposition of elemental silver in a variety of shapes and sizes.

  18. Galvanic displacement of metals on semiconductor nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Melanie; Kelly, Joel A; Henderson, Eric J; Veinot, Jonathan G C, E-mail: jveinot@ualberta.ca [University of Alberta, Department of Chemistry, Edmonton, AB, T6G 2G2 (Canada)

    2009-11-15

    We report the galvanic displacement (GD) of germanium from germanium nanocrystals (Ge-NCs) with silver. The Ge-NCs are synthesized by reductive thermal processing of germanium suboxide sol-gel prepolymers. Thermal processing yields size-controlled oxide-embedded Ge-NCs, which are liberated by dissolution of the germanium oxide matrix in water. Subsequent exposure of the freestanding Ge-NCs to aqueous solutions of AgNO{sub 3} leads to deposition of silver nanostructures by GD. The resulting metal structures were analyzed by XRD, XPS, TEM and EDX, confirming deposition of elemental silver in a variety of shapes and sizes.

  19. Simulating People Moving in Displacement Ventilated Rooms

    DEFF Research Database (Denmark)

    Mattsson, M.; Bjørn, Erik; Sandberg, M.

    A displacement ventilation system works better the more uni-directional the air flow through the ventilated room is: from floor to ceiling. Thus, from an air quality point of view, there should be as little vertical mixing of the room air as possible. It is therefore comprehensible that physical...... activity in the room -like peoples movements -in previous studies has been shown to influence the effectiveness of the ventilation. In this study we have compared results from previous tests, where a cylindrical person simulator was used, to results obtained when using a person simulator of more human...

  20. Diffusion behaviors of helium atoms at two Pd grain boundaries

    Institute of Scientific and Technical Information of China (English)

    XIA Ji-xing; HU Wang-yu; YANG Jian-yu; AO Bing-yun

    2006-01-01

    The diffusion behaviors of helium atoms at two symmetric grain boundaries (Σ5{210} and Σ3 {112}) of Pd were investigated using molecular dynamics simulations through an analytical embedded-atom method(MAEAM) model. The simulations demonstrate that the interstitial helium atoms are easily trapped at the grain boundaries and precipitated into clusters. Due to the closed-shell electronic configurations of both helium and palladium,Pd grain boundaries yield strong capability of retaining helium atoms. By calculating the mean square displacements(MSD) of an interstitial helium atom at the grain boundaries,the diffusion coefficients were determined,and the linear fits to Arrhenius relation. The diffusion activation energies of interstitial helium atom at these two Pd grain boundaries were also evaluated.

  1. Mie resonances in inhomogeneous atomic clouds

    CERN Document Server

    Bachelard, Romain; Kaiser, Robin; Piovella, Nicola

    2011-01-01

    Despite the quantum nature of the process, collective scattering by dense cold samples of two-level atoms can be interpreted classically describing the sample as a macroscopic object with a complex refractive index. We demonstrate that Mie resonances can be easily observable in the cooperative scattering by tuning the frequency of the incident laser field or the atomic number. The solution of the scattering problem is obtained for spherical atomic clouds who have the parabolic density characteristic of BECs, and the cooperative radiation pressure force calculated exhibits resonances in the cloud displacement for dense clouds. Reminescent to uniform clouds which show a complex structure of narrow peaks, these densities show resonances, yet under the form of quite regular and contrasted oscillations.

  2. Long-Time Mean Square Displacements in Proteins

    CERN Document Server

    Vural, Derya; Smith, Jeremy C; Glyde, Henry R

    2013-01-01

    We propose a method for obtaining the intrinsic, long time mean square displacement (MSD) of atoms and molecules in proteins from finite time molecular dynamics (MD) simulations. Typical data from simulations are limited to times of 1 to 10 ns and over this time period the calculated MSD continues to increase without a clear limiting value. The proposed method consists of fitting a model to MD simulation-derived values of the incoherent intermediate neutron scattering function, $I_{inc}(Q,t)$, for finite times. The infinite time MSD, $$, appears as a parameter in the model and is determined by fits of the model to the finite time $I_{inc}(Q,t)$. Specifically, the $$ is defined in the usual way in terms of the Debye-Waller factor as $I(Q,t = \\infty) = \\exp(- Q^2 /3)$. The method is illustrated by obtaining the intrinsic MSD $$ of hydrated lysozyme powder (h = 0.4 g water/g protein) over a wide temperature range. The intrinsic $$ obtained from data out to 1 ns and to 10 ns is found to be the same. The intrinsi...

  3. Atomic phase diagram

    Institute of Scientific and Technical Information of China (English)

    LI Shichun

    2004-01-01

    Based on the Thomas-Fermi-Dirac-Cheng model, atomic phase diagram or electron density versus atomic radius diagram describing the interaction properties of atoms of different kinds in equilibrium state is developed. Atomic phase diagram is established based on the two-atoms model. Besides atomic radius, electron density and continuity condition for electron density on interfaces between atoms, the lever law of atomic phase diagram involving other physical parameters is taken into account, such as the binding energy, for the sake of simplicity.

  4. Cold Matter Assembled Atom-by-Atom

    CERN Document Server

    Endres, Manuel; Keesling, Alexander; Levine, Harry; Anschuetz, Eric R; Krajenbrink, Alexandre; Senko, Crystal; Vuletic, Vladan; Greiner, Markus; Lukin, Mikhail D

    2016-01-01

    The realization of large-scale fully controllable quantum systems is an exciting frontier in modern physical science. We use atom-by-atom assembly to implement a novel platform for the deterministic preparation of regular arrays of individually controlled cold atoms. In our approach, a measurement and feedback procedure eliminates the entropy associated with probabilistic trap occupation and results in defect-free arrays of over 50 atoms in less than 400 ms. The technique is based on fast, real-time control of 100 optical tweezers, which we use to arrange atoms in desired geometric patterns and to maintain these configurations by replacing lost atoms with surplus atoms from a reservoir. This bottom-up approach enables controlled engineering of scalable many-body systems for quantum information processing, quantum simulations, and precision measurements.

  5. Mechanistic Study of Shape-Anisotropic Nanomaterials Synthesized via Spontaneous Galvanic Displacement

    Energy Technology Data Exchange (ETDEWEB)

    Strand, Matthew B.; Leong, G. Jeremy; Tassone, Christopher J.; Larsen, Brian; Neyerlin, K. C.; Gorman, Brian; Diercks, David R.; Pylypenko, Svitlana; Pivovar, Bryan; Richards, Ryan M.

    2016-11-03

    Among the broad portfolio of preparations for nanoscale materials, spontaneous galvanic displacement (SGD) is emerging as an important technology because it is capable of creating functional nanomaterials that cannot be obtained through other routes and may be used to thrift precious metals used in a broad range of applications including catalysis. With advances resulting from increased understanding of the SGD process, materials that significantly improve efficiency and potentially enable widespread adoption of next generation technologies can be synthesized. In this work, PtAg nanotubes synthesized via displacement of Ag nanowires by Pt were used as a model system to elucidate the fundamental mechanisms of SGD. Characterization by X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and atom probe tomography (APT) indicates nanotubes are formed as Ag is oxidized first from the surface and then from the center of the nanowire, with Pt deposition forming a rough, heterogeneous surface on the PtAg nanotube.

  6. Precision optical displacement measurements using biphotons

    Science.gov (United States)

    Lyons, Kevin; Pang, Shengshi; Kwiat, Paul G.; Jordan, Andrew N.

    2016-04-01

    We propose and examine the use of biphoton pairs, such as those created in parametric down-conversion or four-wave mixing, to enhance the precision and the resolution of measuring optical displacements by position-sensitive detection. We show that the precision of measuring a small optical beam displacement with this method can be significantly enhanced by the correlation between the two photons, given the same optical mode. The improvement is largest if the correlations between the photons are strong, and falls off as the biphoton correlation weakens. More surprisingly, we find that the smallest resolvable parameter of a simple split detector scales as the inverse of the number of biphotons for small biphoton number ("Heisenberg scaling"), because the Fisher information diverges as the parameter to be estimated decreases in value. One usually sees this scaling only for systems with many entangled degrees of freedom. We discuss the transition for the split-detection scheme to the standard quantum limit scaling for imperfect correlations as the biphoton number is increased. An analysis of an N -pixel detector is also given to investigate the benefit of using a higher resolution detector. The physical limit of these metrology schemes is determined by the uncertainty in the birth zone of the biphoton in the nonlinear crystal.

  7. Grating Loaded Cantilevers for Displacement Measurements

    Science.gov (United States)

    Karademir, Ertugrul; Olcum, Selim; Atalar, Abdullah; Aydinli, Atilla

    2010-03-01

    A cantilever with a grating coupler engraved on its tip is used for measuring displacement. The coupled light in the cantilever is guided to a single mode optical waveguide defined at the base of the cantilever. The grating period is 550 nm and is fabricated on a SOI wafer using nanoimprint lithography. The waveguide and the cantilever are defined by an RIE and cantilevers released by KOH and HF solutions. Light with 1550 nm wavelength, is directed onto the grating coupler and detected at the cleaved end of the SOI waveguide. The angle of incidence is controlled by a motorized rotary stage. Light couples into the waveguide at a characteristic angle with a full width at half maximum of approximately 6.9 mrads translating into a Q factor of 87.5. The displacement sensitivity is measured by driving the cantilever with a frequency controlled piezoelectric element. The modulation of the light at the waveguide output is lock-in detected by a biased infrared detector. The resulting 43%mrad-1 sensitivity can be increased with further optimization.

  8. Estimating Hydrologic Processes from Subsurface Soil Displacements

    Science.gov (United States)

    Freeman, C. E.; Murdoch, L. C.; Germanovich, L.; MIller, S.

    2012-12-01

    Soil moisture and the processes that control it are important components of the hydrologic cycle, but measuring these processes remains challenging. We have developed a new measurement method that offers flexibility compared to existing technology. The approach is to measure small vertical displacements in the soil which responds proportionally to distributed surface load changes such as variation in the near-surface water content. The instrument may be installed at a depth of several meters to hundreds of meters below the surface. Because the measurement averaging region scales with the depth of the displacement measurements, this approach provides the means for estimating the soil moisture time series over tens of square meters to tens of thousands of square meters. The instrument developed for this application is called a Sand-X, which is short for Sand Extensometer. It is designed for applications in unconsolidated material, ranging from clay to sand. The instrument is simple and relatively inexpensive, and it can be installed in a boring made with a hand auger or with a small drill rig. Studies at the field scale are ongoing at a field site near Clemson, SC. The site is underlain by saprolite weathered primarily from biotite gneiss. Several Sand-X devices are installed at a field site that is instrumented for validating soil moisture, precipitation, and evapotranspiration estimates. These instruments are emplaced at a depth of 6 m and respond to the weight of a vehicle out to 18 m from the well. Calibration is performed by comparing precipitation measurements to the soil displacement response. For example, the coefficient for one installation is roughly 185 nm soil displacement/mm water content change. The resolution of the instrument is approximately 10 nm, so the Sand-X is capable of detecting changes of soil moisture on the order of tenths of one mm in compliant soils like saprolite. A typical soil displacement time series shows alternating periods of

  9. Attenuation of Scalar Fluxes Measured with Spatially-displaced Sensors

    Science.gov (United States)

    Horst, T. W.; Lenschow, D. H.

    2009-02-01

    Observations from the Horizontal Array Turbulence Study (HATS) field program are used to examine the attenuation of measured scalar fluxes caused by spatial separation between the vertical velocity and scalar sensors. The HATS data show that flux attenuation for streamwise, crosswind, and vertical sensor displacements are each a function of a dimensionless, stability-dependent parameter n m multiplied by the ratio of sensor displacement to measurement height. The scalar flux decays more rapidly with crosswind displacements than for streamwise displacements and decays more rapidly for stable stratification than for unstable stratification. The cospectral flux attenuation model of Kristensen et al. agrees well with the HATS data for streamwise sensor displacements, although it is necessary to include a neglected quadrature spectrum term to explain the observation that flux attenuation is often less with the scalar sensor downwind of the anemometer than for the opposite configuration. A simpler exponential decay model provides good estimates for crosswind sensor displacements, as well as for streamwise sensor displacements with stable stratification. A model similar to that of Lee and Black correctly predicts flux attenuation for a combination of streamwise and crosswind displacements, i.e. as a function of wind direction relative to the sensor displacement. The HATS data for vertical sensor displacements extend the near-neutral results of Kristensen et al. to diabatic stratification and confirm their finding that flux attenuation is less with the scalar sensor located below the anemometer than if the scalar sensor is displaced an equal distance either horizontally or above the anemometer.

  10. The effect of base pair mismatch on DNA strand displacement

    CERN Document Server

    Broadwater, Bo

    2016-01-01

    DNA strand displacement is a key reaction in DNA homologous recombination and DNA mismatch repair and is also heavily utilized in DNA-based computation and locomotion. Despite its ubiquity in science and engineering, sequence-dependent effects of displacement kinetics have not been extensively characterized. Here, we measured toehold-mediated strand displacement kinetics using single-molecule fluorescence in the presence of a single base pair mismatch. The apparent displacement rate varied significantly when the mismatch was introduced in the invading DNA strand. The rate generally decreased as the mismatch in the invader was encountered earlier in displacement. Our data indicate that a single base pair mismatch in the invader stalls branch migration, and displacement occurs via direct dissociation of the destabilized incumbent strand from the substrate strand. We combined both branch migration and direct dissociation into a model, which we term, the concurrent displacement model, and used the first passage t...

  11. Analog Computation by DNA Strand Displacement Circuits.

    Science.gov (United States)

    Song, Tianqi; Garg, Sudhanshu; Mokhtar, Reem; Bui, Hieu; Reif, John

    2016-08-19

    DNA circuits have been widely used to develop biological computing devices because of their high programmability and versatility. Here, we propose an architecture for the systematic construction of DNA circuits for analog computation based on DNA strand displacement. The elementary gates in our architecture include addition, subtraction, and multiplication gates. The input and output of these gates are analog, which means that they are directly represented by the concentrations of the input and output DNA strands, respectively, without requiring a threshold for converting to Boolean signals. We provide detailed domain designs and kinetic simulations of the gates to demonstrate their expected performance. On the basis of these gates, we describe how DNA circuits to compute polynomial functions of inputs can be built. Using Taylor Series and Newton Iteration methods, functions beyond the scope of polynomials can also be computed by DNA circuits built upon our architecture.

  12. An Alternative to Maxwell's Displacement Current

    CERN Document Server

    Wolsky, Alan M

    2014-01-01

    Though sufficient for local conservation of charge, we show that Maxwells displacement current is not necessary. An alternative to the Ampere Maxwell equation is exhibited and the alternative s electric and magnetic fields and scalar and vector potentials are expressed in terms of the charge and current densities. The alternative describes a theory in which action is instantaneous and so may provide a good approximation to Maxwells equations where and when the finite speed of light can be neglected. The result is reminiscent of the Darwin approximation which arose from the study classical charged point particles to order (v/c)2 in the Lagrangian. Unlike Darwin, this approach does not depend on the constitution of the electric current. Instead, this approach grows from a straightforward revision of the Ampere Equation which revision enforces the local conservation of charge.

  13. Axial flow positive displacement worm compressor

    Science.gov (United States)

    Murrow, Kurt David (Inventor); Giffin, Rollin George (Inventor); Fakunle, Oladapo (Inventor)

    2010-01-01

    An axial flow positive displacement compressor has an inlet axially spaced apart and upstream from an outlet. Inner and outer bodies have offset inner and outer axes extend from the inlet to the outlet through first and second sections of a compressor assembly in serial downstream flow relationship. At least one of the bodies is rotatable about its axis. The inner and outer bodies have intermeshed inner and outer helical blades wound about the inner and outer axes respectively. The inner and outer helical blades extend radially outwardly and inwardly respectively. The helical blades have first and second twist slopes in the first and second sections respectively. The first twist slopes are less than the second twist slopes. An engine including the compressor has in downstream serial flow relationship from the compressor a combustor and a high pressure turbine drivingly connected to the compressor by a high pressure shaft.

  14. Axial flow positive displacement worm gas generator

    Science.gov (United States)

    Murrow, Kurt David (Inventor); Giffin, Rollin George (Inventor); Fakunle, Oladapo (Inventor)

    2010-01-01

    An axial flow positive displacement engine has an inlet axially spaced apart and upstream from an outlet. Inner and outer bodies have offset inner and outer axes extend from the inlet to the outlet through first, second, and third sections of a core assembly in serial downstream flow relationship. At least one of the bodies is rotatable about its axis. The inner and outer bodies have intermeshed inner and outer helical blades wound about the inner and outer axes respectively. The inner and outer helical blades extend radially outwardly and inwardly respectively. The helical blades have first, second, and third twist slopes in the first, second, and third sections respectively. The first twist slopes are less than the second twist slopes and the third twist slopes are less than the second twist slopes. A combustor section extends axially downstream through at least a portion of the second section.

  15. Relativistic Lagrangian displacement field and tensor perturbations

    CERN Document Server

    Rampf, Cornelius

    2014-01-01

    We investigate the purely spatial Lagrangian coordinate transformation from the Lagrangian to the fundamental Eulerian frame. We demonstrate three techniques for extracting the relativistic displacement field from a given solution in the Lagrangian frame. These techniques are (a) from defining a local set of Eulerian coordinates embedded into the Lagrangian frame; (b) from performing a specific gauge transformation; and (c) from a fully non-perturbative approach based on the ADM split. The latter approach shows that this decomposition is not tied to a specific perturbative formulation for the solution of the Einstein equations. Rather, it can be defined at the level of the non-perturbative coordinate change from the Lagrangian to the Eulerian description. Studying such different techniques is useful because it allows us to compare and develop further the various approximation techniques available in the Lagrangian formulation. We find that one has to solve for gravitational waves in the relativistic analysis,...

  16. Dynamics of liquid-liquid displacement.

    Science.gov (United States)

    Fetzer, Renate; Ramiasa, Melanie; Ralston, John

    2009-07-21

    Capillary driven liquid-liquid displacement in a system with two immiscible liquids of comparable viscosity was investigated by means of optical high speed video microscopy. For the first time, the impact of substrate wettability on contact line dynamics in liquid-liquid systems was studied. On all substrates, qualitatively different dynamics, in two distinct velocity regimes, were found. Hydrodynamic models apply to the fast stage of initial spreading, while nonhydrodynamic dissipation dominates contact line motion in a final stage at low speed, where the molecular kinetic theory (MKT) successfully captured the dynamics. The MKT model parameter values showed no systematic dependence on substrate wettability. This unexpected result is interpreted in terms of local contact line pinning.

  17. Displaced fracture through the anterior atlantal synchondrosis

    Energy Technology Data Exchange (ETDEWEB)

    Thakar, Chrishan; Allibone, James [Royal National Orthopaedic Hospital NHS Trust, Department of Spinal Deformity, Stanmore, Middlesex (United Kingdom); Harish, Srinivasan [Royal National Orthopaedic Hospital NHS Trust, Department of Radiology, Stanmore, Middlesex (United Kingdom); Saifuddin, Asif [Royal National Orthopaedic Hospital NHS Trust, Department of Radiology, Stanmore, Middlesex (United Kingdom); University College, The Institute of Orthopaedics and Musculoskeletal Sciences, London (United Kingdom)

    2005-09-01

    In the acute setting, accurate radiological interpretation of paediatric cervical spine trauma can be difficult due to a combination of normal variants and presence of multiple synchondroses. We present a rare case of a fracture through the anterior atlantal synchondrosis in a paediatric spine. A five-year-old boy, who fell backwards onto the top of his head while swinging across on a monkey bar frame, presented with neck pain, cervical muscle spasm and decreased right lateral rotation and extension of his neck. Computed tomography showed a displaced diastatic fracture through right anterior atlantal synchondrosis. There are only 12 cases of paediatric C1 fractures reported in the world literature. The importance of considering this diagnosis in the appropriate clinical setting, and the normal variants in the paediatric atlas that can cause diagnostic dilemma to the interpreting radiologist, are discussed in this case report. (orig.)

  18. Superconducting inductive displacement detection of a microcantilever

    Energy Technology Data Exchange (ETDEWEB)

    Vinante, A., E-mail: anvinante@fbk.eu [Istituto di Fotonica e Nanotecnologie, CNR - Fondazione Bruno Kessler, I-38123 Povo, Trento (Italy)

    2014-07-21

    We demonstrate a superconducting inductive technique to measure the displacement of a micromechanical resonator. In our scheme, a type I superconducting microsphere is attached to the free end of a microcantilever and approached to the loop of a dc Superconducting Quantum Interference Device (SQUID) microsusceptometer. A local magnetic field as low as 100 μT, generated by a field coil concentric to the SQUID, enables detection of the cantilever thermomechanical noise at 4.2 K. The magnetomechanical coupling and the magnetic spring are in good agreement with image method calculations assuming pure Meissner effect. These measurements are relevant to recent proposals of quantum magnetomechanics experiments based on levitating superconducting microparticles.

  19. Can Monkeys (Macaca mulatta) Represent Invisible Displacement?

    Science.gov (United States)

    Filion, Christine M.; Washburn, David A.; Gulledge, Jonathan P.

    1996-01-01

    Four experiments were conducted to assess whether or not rhesus macaques (Macaca mulatta) could represent the unperceived movements of a stimulus. Subjects were tested on 2 computerized tasks, HOLE (monkeys) and LASER (humans and monkeys), in which subjects needed to chase or shoot at, respectively, a moving target that either remained visible or became invisible for a portion of its path of movement. Response patterns were analyzed and compared between target-visible and target-invisible conditions. Results of Experiments 1, 2, and 3 demonstrated that the monkeys are capable of extrapolating movement. That this extrapolation involved internal representation of the target's invisible movement was suggested but not confirmed. Experiment 4, however, demonstrated that the monkeys are capable of representing the invisible displacements of a stimulus.

  20. Anisotropic permeability in deterministic lateral displacement arrays

    CERN Document Server

    Vernekar, Rohan; Loutherback, Kevin; Morton, Keith; Inglis, David

    2016-01-01

    We investigate anisotropic permeability of microfluidic deterministic lateral displacement (DLD) arrays. A DLD array can achieve high-resolution bimodal size-based separation of micro-particles, including bioparticles such as cells. Correct operation requires that the fluid flow remains at a fixed angle with respect to the periodic obstacle array. We show via experiments and lattice-Boltzmann simulations that subtle array design features cause anisotropic permeability. The anisotropy, which indicates the array's intrinsic tendency to induce an undesired lateral pressure gradient, can lead to off-axis flows and therefore local changes in the critical separation size. Thus, particle trajectories can become unpredictable and the device useless for the desired separation duty. We show that for circular posts the rotated-square layout, unlike the parallelogram layout, does not suffer from anisotropy and is the preferred geometry. Furthermore, anisotropy becomes severe for arrays with unequal axial and lateral gaps...

  1. Has multivessel angioplasty displaced surgical revascularization?

    Science.gov (United States)

    King, S B; Ivanhoe, R J

    1990-01-01

    Over the years, PTCA has been proved a safe and effective therapy for single-vessel CAD. Given the record of favorable results for single-vessel angioplasty, the extension of angioplasty to multivessel CAD soon followed. The successful application of PTCA to multivessel disease has been facilitated by developments in balloon, guidewire, and guide catheter technology. Success rates have been satisfactory, and complications have remained acceptable. Furthermore, as an outgrowth of an understanding of the mechanism and effect of PTCA, guidelines have been developed to aid case selection. As emphasized earlier, these guidelines should weigh heavily in deciding whether to select PTCA as a treatment modality. Presently, in our opinion, PTCA has not yet completely displaced surgery for multivessel CAD. Surgical standby is required for safe PTCA, because emergency surgery can be lifesaving and limit myocardial infarction after failed angioplasty. It is doubtful that surgery will ever relinquish its position as the treatment of choice for left main coronary artery disease. Nor will elective surgery find wide application in single-vessel disease. Whether one mode of revascularization will emerge as the most efficacious for multivessel disease related to long-term survival, limitation of cardiac events, and cost will be addressed in the analysis of the ongoing randomized trials of surgery versus angioplasty. Andreas Gruentzig established that it was possible to work within the coronary artery in an alert and comfortable patient. Interventional cardiology has experienced rapid technologic growth. Many patients formerly treated with bypass surgery can be managed effectively with angioplasty. If effective bail-out methods for acute closure are proven effective and restenosis is limited to a small percentage of patients, angioplasty in some form will further displace CABG. Until those ultimate goals are achieved, the value of angioplasty compared with bypass surgery must rest

  2. Fluid trapping during capillary displacement in fractures

    Science.gov (United States)

    Yang, Zhibing; Neuweiler, Insa; Méheust, Yves; Fagerlund, Fritjof; Niemi, Auli

    2016-09-01

    The spatial distribution of fluid phases and the geometry of fluid-fluid interfaces resulting from immiscible displacement in fractures cast decisive influence on a range of macroscopic flow parameters. Most importantly, these are the relative permeabilities of the fluids as well as the macroscopic irreducible saturations. They also influence parameters for component (solute) transport, as it usually occurs through one of the fluid phase only. Here, we present a numerical investigation on the critical role of aperture variation and spatial correlation on fluid trapping and the morphology of fluid phase distributions in a geological fracture. We consider drainage in the capillary dominated regime. The correlation scale, that is, the scale over which the two facing fracture walls are matched, varies among the investigated geometries between L/256 and L (self-affine fields), L being the domain/fracture length. The aperture variability is quantified by the coefficient of variation (δ), ranging among the various geometries from 0.05 to 0.25. We use an invasion percolation based model which has been shown to properly reproduce displacement patterns observed in previous experiments. We present a quantitative analysis of the size distribution of trapped fluid clusters. We show that when the in-plane curvature is considered, the amount of trapped fluid mass first increases with increasing correlation scale Lc and then decreases as Lc further increases from some intermediate scale towards the domain length scale L. The in-plane curvature contributes to smoothening the invasion front and to dampening the entrapment of fluid clusters of a certain size range that depends on the combination of random aperture standard deviation and spatial correlation.

  3. Systematic review of mini-implant displacement under orthodontic loading

    Institute of Scientific and Technical Information of China (English)

    Manuel Nienkemper; Jörg Handschel; Dieter Drescher

    2014-01-01

    A growing number of studies have reported that mini-implants do not remain in exactly the same position during treatment, although they remain stable. The aim of this review was to collect data regarding primary displacement immediately straight after loading and secondary displacement over time. A systematic review was performed to investigate primary and secondary displacement. The amount and type of displacement were recorded. A total of 27 studies were included. Sixteen in vitro studies or studies using finite element analysis addressed primary displacement, and nine clinical studies and two animal studies addressed secondary displacement. Significant primary displacement was detected (6.4-24.4 mm) for relevant orthodontic forces (0.5-2.5 N). The mean secondary displacement ranged from 0 to 2.7 mm for entire mini-implants. The maximum values for each clinical study ranged from 1.0 to 4.1 mm for the head, 1.0 to 1.5 for the body and 1.0 to 1.92 mm for the tail part. The most frequent type of movement was controlled tipping or bodily movement. Primary displacement did not reach a clinically significant level. However, clinicians can expect relevant secondary displacement in the direction of force. Consequently, decentralized insertion within the inter-radicular space, away from force direction, might be favourable. More evidence is needed to provide quantitative recommendations.

  4. Atom Lithography with a Chromium Atomic Beam

    Institute of Scientific and Technical Information of China (English)

    ZHANG Wen-Tao; LI Tong-Bao

    2006-01-01

    @@ Direct write atom lithography is a new technique in which resonant light is used to pattern an atomic beam and the nanostructures are formed when the atoms deposit on the substrate. We design an experiment setup to fabricate chromium nanolines by depositing an atomic beam of 52 Cr through an off-resonant laser standing wave with the wavelength of 425.55 nm onto a silicon substrate. The resulting nanolines exhibit a period of 215 ± 3 nm with height of 1 nm.

  5. Laser-Ranging Long Baseline Differential Atom Interferometers for Space

    CERN Document Server

    Chiow, Sheng-wey; Yu, Nan

    2015-01-01

    High sensitivity differential atom interferometers are promising for precision measurements in science frontiers in space, including gravity field mapping for Earth science studies and gravitational wave detection. We propose a new configuration of twin atom interferometers connected by a laser ranging interferometer (LRI-AI) to provide precise information of the displacements between the two AI reference mirrors and a means to phase-lock the two independent interferometer lasers over long distances, thereby further enhancing the feasibility of long baseline differential atom interferometers. We show that a properly implemented LRI-AI can achieve equivalent functionality to the conventional differential atom interferometer measurement system. LRI-AI isolates the laser requirements for atom interferometers and for optical phase readout between distant locations, thus enabling optimized allocation of available laser power within a limited physical size and resource budget. A unique aspect of LRI-AI also enables...

  6. Advances in atomic spectroscopy

    CERN Document Server

    Sneddon, J

    2000-01-01

    This fifth volume of the successful series Advances in Atomic Spectroscopy continues to discuss and investigate the area of atomic spectroscopy.It begins with a description of the use of various atomic spectroscopic methods and applications of speciation studies in atomic spectroscopy. The emphasis is on combining atomic spectroscopy with gas and liquid chromatography. In chapter two the authors describe new developments in tunable lasers and the impact they will have on atomic spectroscopy. The traditional methods of detection, such as photography and the photomultiplier, and how they are being replaced by new detectors is discussed in chapter three. The very active area of glow discharge atomic spectrometry is presented in chapter four where, after a brief introduction and historical review, the use of glow discharge lamps for atomic spectroscopy and mass spectrometry are discussed. Included in this discussion is geometry and radiofrequency power. The future of this source in atomic spectroscopy is also dis...

  7. Atomic and molecular manipulation

    CERN Document Server

    Mayne, Andrew J

    2011-01-01

    Work with individual atoms and molecules aims to demonstrate that miniaturized electronic, optical, magnetic, and mechanical devices can operate ultimately even at the level of a single atom or molecule. As such, atomic and molecular manipulation has played an emblematic role in the development of the field of nanoscience. New methods based on the use of the scanning tunnelling microscope (STM) have been developed to characterize and manipulate all the degrees of freedom of individual atoms and molecules with an unprecedented precision. In the meantime, new concepts have emerged to design molecules and substrates having specific optical, mechanical and electronic functions, thus opening the way to the fabrication of real nano-machines. Manipulation of individual atoms and molecules has also opened up completely new areas of research and knowledge, raising fundamental questions of "Optics at the atomic scale", "Mechanics at the atomic scale", Electronics at the atomic scale", "Quantum physics at the atomic sca...

  8. DENSE: Displacement Encoding with Stimulated Echoes in Cardiac Functional MRI

    Science.gov (United States)

    Aletras, Anthony H.; Ding, Shujun; Balaban, Robert S.; Wen, Han

    1999-03-01

    Displacement encoding with stimulated echoes (DENSE) was developed for high-resolution myocardial displacement mapping. Pixel phase is modulated by myocardial displacement and data spatial resolution is limited only by pixel size. 2D displacement vector maps were generated for the systolic action in canines with 0.94 × 1.9 mm nominal in-plane resolution and 2.3 mm/π displacement encoding. A radial strain of 0.208 was measured across the free left ventricular wall over 105 ms during systole. DENSE displacement maps require small first-order gradient moments for encoding. DENSE magnitude images exhibit black-blood contrast which allows for better myocardial definition and reduced motion-related artifacts.

  9. Statistical Nature of Atomic Disorder in Irradiated Crystals

    Science.gov (United States)

    Boulle, A.; Debelle, A.

    2016-06-01

    Atomic disorder in irradiated materials is investigated by means of x-ray diffraction, using cubic SiC single crystals as a model material. It is shown that, besides the determination of depth-resolved strain and damage profiles, x-ray diffraction can be efficiently used to determine the probability density function (PDF) of the atomic displacements within the crystal. This task is achieved by analyzing the diffraction-order dependence of the damage profiles. We thereby demonstrate that atomic displacements undergo Lévy flights, with a displacement PDF exhibiting heavy tails [with a tail index in the γ =0.73 - 0.37 range, i.e., far from the commonly assumed Gaussian case (γ =2 )]. It is further demonstrated that these heavy tails are crucial to account for the amorphization kinetics in SiC. From the retrieved displacement PDFs we introduce a dimensionless parameter fDXRD to quantify the disordering. fDXRD is found to be consistent with both independent measurements using ion channeling and with molecular dynamics calculations.

  10. Displacement desorption test of coalbed methane and its mechanism exploring

    Institute of Scientific and Technical Information of China (English)

    ZHANG Suian; HUO Yongzhong; YE Jianping; TANG Shuheng; MA Dongmin

    2005-01-01

    Through the test of CH4 displaced by CO2 using the coal sample as the adsorbent, this paper has found the coalbed methane (CBM) displacement desorption phenomenon under the natural conditions and CBM mining conditions. With the help of the adsorption theory of the modern physical chemistry and interfacial chemistry, the CBM competitive adsorption and displacement desorption mechanism are intensively discussed, and a new path for studying the CBM desorption mechanism in the CBM exploitation process is explored.

  11. Test Rig Design For Compact Variable Displacement Vane Pump

    OpenAIRE

    Chawla, Pratik; Jenkins, Ryan; Ivantysynova, Monika

    2015-01-01

    Variable displacement vane pumps (VDVP) are one type of positive displacement pumps used in automatic transmission vehicles for lubricating the gears, cooling the transmission and actuating the clutches. Though fixed displacement pumps are widely used, they output a constant effective flow at a given speed. Depending on pump sizing considerations, the pump can be oversized at high speeds because flow demand of the transmission is independent of engine speed. The excess flow returns to the tan...

  12. Gingival displacement methods used by dental professionals: A survey

    OpenAIRE

    S V Giridhar Reddy; M.Bharathi; B. Vinod; K Rajeev Kumar Reddy; N Simhachalam Reddy

    2016-01-01

    Aim: The aim of the present study was to identify the methods used by dental professionals for gingival displacement before making impressions for fixed prostheses. Materials and Methods: A printed questionnaire was distributed to over 600 dentists at a National Dental Conference held in Hyderabad. The questionnaire was designed to know the preferred method of gingival displacement, medicament used, frequency of performing gingival displacement, etc. The results were analyzed and represented ...

  13. Displacement spectra and displacement modification factors, based on records from Greece

    OpenAIRE

    Athanassiadou, C. J.; Karakostas, C. Z.; Margaris, B. N.; Kappos, A. J.

    2011-01-01

    Elastic and inelastic displacement spectra (for periods up to 4.0 s) are derived, using a representative sample of acceleration records from Greece, carefully selected based on magnitude, distance and peak ground acceleration criteria, and grouped into three ground type categories according to the Eurocode 8 (EC8) provisions. The modification factor for the elastic design spectrum adopted in EC8 for accounting for damping is verified herein and is found to be satisfactory in the short to medi...

  14. Studying Landslide Displacements in Megamendung (Indonesia Using GPS Survey Method

    Directory of Open Access Journals (Sweden)

    Hasanuddin Z. Abidin

    2004-11-01

    Full Text Available Landslide is one of prominent geohazards that frequently affects Indonesia, especially in the rainy season. It destroys not only environment and property, but usually also causes deaths. Landslide monitoring is therefore very crucial and should be continuously done. One of the methods that can have a contribution in studying landslide phenomena is repeated GPS survey method. This paper presents and discusses the operational performances, constraints and results of GPS surveys conducted in a well known landslide prone area in West Java (Indonesia, namely Megamendung, the hilly region close to Bogor. Three GPS surveys involving 8 GPS points have been conducted, namely on April 2002, May 2003 and May 2004, respectively. The estimated landslide displacements in the area are relatively quite large in the level of a few dm to a few m. Displacements up to about 2-3 m were detected in the April 2002 to May 2003 period, and up to about 3-4 dm in the May 2003 to May 2004 period. In both periods, landslides in general show the northwest direction of displacements. Displacements vary both spatially and temporally. This study also suggested that in order to conclude the existence of real and significant displacements of GPS points, the GPS estimated displacements should be subjected to three types of testing namely: the congruency test on spatial displacements, testing on the agreement between the horizontal distance changes with the predicted direction of landslide displacement, and testing on the consistency of displacement directions on two consecutive periods.

  15. The Three Gorges: the unexamined toll of development-induced displacement

    OpenAIRE

    Martin Stein

    1998-01-01

    In China, the context of forced displacement in its broadest sense centres on four issues: (1) coercive displacement for development; (2) political persecution resulting in controlled displacement; (3) massive labour dislocations; and (4) disaster-induced displacement. This article looks at the role of the state in displacement, focusing on the first of these issues: development-induced displacement.

  16. Displacement of the ventricular fold following cordectomy.

    Science.gov (United States)

    Fukuda, H; Tsuji, D H; Kawasaki, Y; Kawaida, M; Sakou, T

    1990-01-01

    In order to avoid radiation and its undesirable side effects, we have employed surgical techniques for treatment of early glottic cancer when the lesion is confined to one membranous cord (Fukuda, Saito, Sato, and Kitahara: J. Jpn. Bronchoesophagol. Soc. 30: 7-14, 1979; Fukuda and Saito: Otologica 26: 434-436, 1980; Fukuda, Kawaida, Ohki, Kawasaki, Kita, and Tatehara: J. Jpn. Bronchoesophagaol. Soc. 39: 139-144, 1988). Laser is one of the most popular techniques and it has been accepted as the first choice by many authors (Annyas, Overbeek, Escajadillo, and Hoeksema: Laryngoscope 94: 836-838, 1984; Mcguirt and Koufman: Arch. Otolaryngol. Head Neck Surg. 113: 501-505, 1987; Tsuji, Fukuda, Kawaskai, Kawaida, and Kanzaki: Keio J. Med. 38: 413-418, 1989). However, some cases are difficult to approach by direct laryngoscopy, requiring an external way to expose the lesion. In these cases, cordectomy by laryngofissure is the method of choice, but the function of the glottis could be improved by replacing the excised cord displacing the ventricular fold. This technique, designed by the authors, was carried out in 22 patients and the results from the viewpoint of phonodynamics, voice quality, and cure rate are discussed in this study. The results are encouraging and we believe that this method is a very reasonable alternative to the laser when such equipment is not available. We also believe that late side effects and oncogenic problems associated with radiation are important points to be considered, especially in patients of relatively younger age.

  17. Motional displacements in proteins incorporating dynamical diversity

    Science.gov (United States)

    Vural, Derya; Smith, Jeremy; Glyde, Henry

    The average mean square displacement (MSD), , of hydrogen H in proteins is measured using incoherent neutron scattering methods. The observed MSD shows a marked increase in magnitude at a temperature TD ~= 240 K. This is widely interpreted as a dynamical transition to large MSDs which make function possible in proteins. However, when the data is interpreted in terms of a single averaged MSD, the extracted depends on the neutron momentum transfer, ℏQ , used in the measurement. We have shown recently that this apparent dependence on Q arises because the dynamical diversity of the H in the protein is neglected[2]. We present models of the dynamical diversity of H in Lysosyme that when used in the analysis of simulated neutron data lead to consistent, Q independent values for the average MSD and for the diversity model.2. D. Vural and L. Hong, J. C. Smith and H. R. Glyde. Phys. Rev. E 91, 052705 (2015). Supported in part by Office of Basic Energy Sciences, USDOE, ER46680.

  18. Presenting the Bohr Atom.

    Science.gov (United States)

    Haendler, Blanca L.

    1982-01-01

    Discusses the importance of teaching the Bohr atom at both freshman and advanced levels. Focuses on the development of Bohr's ideas, derivation of the energies of the stationary states, and the Bohr atom in the chemistry curriculum. (SK)

  19. Simulation of Rutherford backscattering spectrometry from arbitrary atom structures

    Science.gov (United States)

    Zhang, S.; Nordlund, K.; Djurabekova, F.; Zhang, Y.; Velisa, G.; Wang, T. S.

    2016-10-01

    Rutherford backscattering spectrometry in a channeling direction (RBS/C) is a powerful tool for analysis of the fraction of atoms displaced from their lattice positions. However, it is in many cases not straightforward to analyze what is the actual defect structure underlying the RBS/C signal. To reveal insights of RBS/C signals from arbitrarily complex defective atomic structures, we develop here a method for simulating the RBS/C spectrum from a set of arbitrary read-in atom coordinates (obtained, e.g., from molecular dynamics simulations). We apply the developed method to simulate the RBS/C signals from Ni crystal structures containing randomly displaced atoms, Frenkel point defects, and extended defects, respectively. The RBS/C simulations show that, even for the same number of atoms in defects, the RBS/C signal is much stronger for the extended defects. Comparison with experimental results shows that the disorder profile obtained from RBS/C signals in ion-irradiated Ni is due to a small fraction of extended defects rather than a large number of individual random atoms.

  20. Atomic Storage States

    Institute of Scientific and Technical Information of China (English)

    汪凯戈; 朱诗尧

    2002-01-01

    We present a complete description of atomic storage states which may appear in the electromagnetically induced transparency (EIT). The result shows that the spatial coherence has been included in the atomic collective operators and the atomic storage states. In some limits, a set of multimode atomic storage states has been established in correspondence with the multimode Fock states of the electromagnetic field. This gives a better understanding of the fact that, in BIT, the optical coherent information can be preserved and recovered.

  1. Atoms Talking to SQUIDs

    CERN Document Server

    Hoffman, J E; Kim, Z; Wood, A K; Anderson, J R; Dragt, A J; Hafezi, M; Lobb, C J; Orozco, L A; Rolston, S L; Taylor, J M; Vlahacos, C P; Wellstood, F C

    2011-01-01

    We present a scheme to couple trapped $^{87}$Rb atoms to a superconducting flux qubit through a magnetic dipole transition. We plan to trap atoms on the evanescent wave outside an ultrathin fiber to bring the atoms to less than 10 $\\mu$m above the surface of the superconductor. This hybrid setup lends itself to probing sources of decoherence in superconducting qubits. Our current plan has the intermediate goal of coupling the atoms to a superconducting LC resonator.

  2. Single Atom Plasmonic Switch

    OpenAIRE

    Emboras, Alexandros; Niegemann, Jens; Ma, Ping; Haffner, Christian; Luisier, Mathieu; Hafner, Christian; Schimmel, Thomas; Leuthold, Juerg

    2015-01-01

    The atom sets an ultimate scaling limit to Moores law in the electronics industry. And while electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling-similar to electronics-is only limited by the atom. More precisely, we introduce an electrically controlled single atom plasmonic switch. The switch allows for fast and reproducible switching by means of the relocation of an individ...

  3. Atomic Scale Plasmonic Switch

    OpenAIRE

    Emboras, A.; Niegemann, J.; Ma, P.; Haffner, C; Pedersen, A.; Luisier, M.; Hafner, C.; Schimmel, T.; Leuthold, J.

    2016-01-01

    The atom sets an ultimate scaling limit to Moore’s law in the electronics industry. While electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling, similar to electronics, is only limited by the atom. More precisely, we introduce an electrically controlled plasmonic switch operating at the atomic scale. The switch allows for fast and reproducible switching by means of the relocat...

  4. Atomic Spectra Database (ASD)

    Science.gov (United States)

    SRD 78 NIST Atomic Spectra Database (ASD) (Web, free access)   This database provides access and search capability for NIST critically evaluated data on atomic energy levels, wavelengths, and transition probabilities that are reasonably up-to-date. The NIST Atomic Spectroscopy Data Center has carried out these critical compilations.

  5. Single Parent or Displaced Homemaker Program Management Guide.

    Science.gov (United States)

    Utah State Office of Education, Salt Lake City. Div. of Vocational Education.

    This guide is designed to provide vocational education, single parent/displaced homemaker program directors, and other interested persons with information to help them support, establish, and conduct programs for single parents or displaced homemakers in the nine vocational education planning regions of Utah. It includes definitions and staff…

  6. 24 CFR 886.338 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... regulations at 49 CFR part 24. A “displaced person” shall be advised of his or her rights under the Fair... persons. A “displaced person” (defined in paragraph (g) of this section) must be provided relocation... the requirements described in 49 CFR part 24, subpart B. (e) Appeals. A person who disagrees with...

  7. The effect of bone displacement operations on facial soft tissues.

    Science.gov (United States)

    Habib, Ali; Hisham, Ahmed

    2013-01-01

    A novel biomechanical model for face soft tissue (skin, mucosa, and muscles) is introduced to investigate the effect of mandible and chin bone displacement on the overall appearance of the patient's face. Nonlinear FE analysis is applied to the model and the results obtained are used to help surgeons to decide the amount of displacement required.

  8. Scaling of interface displacement in a microfluidic comparator

    NARCIS (Netherlands)

    Vanapalli, S.A.; Ende, van den D.; Duits, M.H.G.; Mugele, F.

    2007-01-01

    The authors quantify both experimentally and theoretically the scaling behavior between interface displacement and excess pressure drop in a microfluidic comparator. Unlike previous studies, the authors measure the interface displacement in the outlet channel of the comparator that yields a unique p

  9. Isothermal Gas assisted displacement of a polystyrene melt

    DEFF Research Database (Denmark)

    Eriksson, Torbjörn Gerhard; Rasmussen, Henrik K.

    2007-01-01

    Isothermal gas displacements of a polystyrene melt (shaped as circular cylinder with a radius of 2.5mm) placed inside a circular steel annulus were performed. A flow valve ensures a constant flow rate and rotational symmetric flow during the displacement. The experiments show an increase in the s...

  10. 24 CFR 236.1001 - Displacement, relocation, and acquisition.

    Science.gov (United States)

    2010-04-01

    ... reasonable steps to minimize the displacement of persons (households, businesses, nonprofit organizations... temporarily to permit rehabilitation or other work for the assisted project. Such tenants must be provided: (1... shall maintain data on the race, ethnic, gender, and disability status of displaced persons....

  11. Displacement and Force Measurements with Quadrant Photodetector in Optical Tweezers

    Institute of Scientific and Technical Information of China (English)

    郭红莲; 刘春香; 李兆霖; 段建发; 韩学海; 程丙英; 张道中

    2003-01-01

    A technique of displacement and force measurements with a photodiode quadrant detector in an optical tweezers system is presented. The stiffness of optical trap is calibrated and the leukemia cell membrane tension is measured.The results show that the optical tweezers combined with the quadrant detector is a very useful tool for detecting the displacement and force with a millisecond-order response.

  12. Forced displacement: a development issue with humanitarian elements

    OpenAIRE

    Niels Harild

    2016-01-01

    Work on conflict-induced forced displacement is at a crucial moment, at a tipping point. Now is the time to consolidate the shift towards full global recognition that the challenge of forced displacement is an integral part of the development agenda too.

  13. Employment protection and the consequences for displaced workers

    DEFF Research Database (Denmark)

    Albæk, Karsten; van Audenrode, Marc; Browning, Martin

    We compare the wage and employment consequences of a job displacement in Belgium and Denmark. These two countries both have generous unemployment insurance schemes but job protection laws vary dramatically between the two. Using comparable data we find that the incidence of displacement...

  14. The use of crosshead displacement in determining fracture parameters

    NARCIS (Netherlands)

    Walters, C.L.; Voormeeren, L.O.; Janssen, M.

    2013-01-01

    In determining the fracture toughness of a test specimen, standards currently require either locally-measured load-line displacements or clip gage displacements. In order to measure these parameters, secondary sensors generally need to be installed and calibrated, which often comes at a higher cost.

  15. Hyoid Displacement in Post-Treatment Cancer Patients: Preliminary Findings

    Science.gov (United States)

    Zu, Yihe; Yang, Zhenyu; Perlman, Adrienne L.

    2011-01-01

    Purpose: Dysphagia after head and neck cancer treatment is a health care issue; in some cases, the cause of death is not cancer but, rather, the passage of food or liquid into the lungs. Hyoid displacement is known to be important to safe swallowing function. The purpose of this study was to evaluate hyoid displacement after cancer treatment.…

  16. A Reference Optical System of Laser Doppler Longitudinal Displacement Measurement

    Institute of Scientific and Technical Information of China (English)

    张存满; 赵洋; 李达成

    2001-01-01

    In this paper, a new reference optical system is put forward to achieve longitudinal displacement measurement. An optical grating is used for frequency mixing and getting high SNR signals in the measurement. Conditions and methods for getting Doppler beat signals are presented.The experiments indicate that this optical syetem can be used to measure the longitudinal displacement with high accuracy.

  17. Uniform stability of displacement coupled second-order equations

    Directory of Open Access Journals (Sweden)

    Abdelaziz Soufyane

    2001-04-01

    Full Text Available We prove that the uniform stability of semigroups associated to displacement coupled dissipator systems is equivalent to the uniform stability of velocity coupled dissipator systems. Using this equivalence, we give sufficient conditions for obtaining uniform stability and exact controllability of displacement coupled dissipator systems.

  18. Simple and economical capacitive displacement system for UHV operation.

    Science.gov (United States)

    Chow, R; Tiller, W A

    1979-12-01

    A parallel plate capacitor was assembled as a displacement transducer for operation in an UHV environment. The capacitive displacement system was linear over a 2.5 mum range with a resolution of 0.051 mum. Components in the electric circuit were common laboratory instruments.

  19. Study on the applicability of the desk displacement ventilation concept

    NARCIS (Netherlands)

    Loomans, Marcel G.L.C.

    1999-01-01

    This paper summarizes an experimental and numerical study into a ventilation concept that combines displacement ventilation with task conditioning, the so-called desk displacement ventilation (DDV) concept. The study uses steady-state and transient results to discuss the applicability of the DDV con

  20. Displacement Ventilation in a Room with Low-Level Diffusers

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    Ventilation systems with vertical displacement flow have been used in industrial areas with high thermal loads for many years. Quite resently the vertical displacement flow systems have grown popular as comfort ventilation in rooms with thermal loads e.g. offices....

  1. Displacement, Outplacement, or Inplacement? Options for Business and Industry.

    Science.gov (United States)

    Wiltzius, Thomas J.

    This report considers the differences among displacement, outplacement, and inplacement and looks at the risks, benefits, and costs of each. Displacement is defined as the termination of employment with little attention given to corporate or individual needs. Outplacement is defined as the pre-planned management of employee termination, addressing…

  2. Topology synthesis of large-displacement compliant mechanisms

    DEFF Research Database (Denmark)

    Pedersen, Claus B. Wittendorf; Buhl, Thomas; Sigmund, Ole

    2001-01-01

    This paper describes the use of topology optimization as a synthesis tool for the design of large-displacement compliant mechanisms. An objective function for the synthesis of large-displacement mechanisms is proposed together with a formulation for synthesis of path-generating compliant mechanisms...

  3. Fiber-coupled displacement interferometry without periodic nonlinearity

    NARCIS (Netherlands)

    Ellis, J.D.; Meskers, A.J.H.; Spronck, J.W.; Munnig Schmidt, R.H.

    2011-01-01

    Displacement interferometry is widely used for accurately characterizing nanometer and subnanometer displacements in many applications. In many modern systems, fiber delivery is desired to limit optical alignment and remove heat sources from the system, but fiber delivery can exacerbate common inter

  4. Forced displacement: a development issue with humanitarian elements

    Directory of Open Access Journals (Sweden)

    Niels Harild

    2016-05-01

    Full Text Available Work on conflict-induced forced displacement is at a crucial moment, at a tipping point. Now is the time to consolidate the shift towards full global recognition that the challenge of forced displacement is an integral part of the development agenda too.

  5. Displacement ventilation and passive cooling strategies

    Energy Technology Data Exchange (ETDEWEB)

    Carew, P.; Bekker, B. [PJCarew Consulting, Cape Town (South Africa)

    2009-07-01

    Displacement ventilation (DV) is widely used a passive cooling strategy because it requires less air supply for cooling compared to conventional mixing ventilation (MV). DV introduces air at low level and low velocity, and at high supply air temperature, usually around 18 degrees C. The slightly cooler air runs along the floor of a room until it reaches a heat load. The heat load induces a plume of warmer air that rises due to lower density. This induces stratification in room temperature with the occupied area of the room. The air near the ceiling is continually exhausted to prevent a build up of warm air into the occupied zone. This paper demonstrated the impacts of using DV in comparison to MV on the peak capacity, size and humidity levels associated with various passive cooling strategies, informed by the ASHRAE DV guidelines. A generic office building in Johannesburg, South Africa, was used as a model. The paper illustrated the extent to which DV can be used as a passive cooling strategy in spaces that were previously considered as having too high a heat load when calculated using MV system guidelines. A comparison of DV and MV also highlighted the risk of over-design when conventional MV guidelines are used to design cooling sources for DV applications. The DV was shown to significantly lower the amount of supply air needed to serve a room's heat load when compared to MV at the same temperatures. This reduction in air supply impacts the feasibility of using passive cooling strategies in evaporative cooling, 2-stage evaporative cooling, thermal storage and air to ground heat exchangers. However, passive cooling strategies are unlikely to be widely implemented until design guidelines are created by organizations such as ASHRAE. 8 refs., 2 tabs., 15 figs.

  6. Surgical treatment of displaced acetabular fractures

    Directory of Open Access Journals (Sweden)

    Milenković Saša

    2011-01-01

    Full Text Available Introduction. Acetabular fractures are severe injuries, generally caused by high-energy trauma, most frequently from traffic accidents or falls from heights. Fractures of the extremities, head injuries, chest, abdomen and pelvic ring injuries are most commonly associated injuries. Objective. The purpose of this study was to evaluate the results of open reduction and internal fixation of acetabular fractures. The open anatomical reduction of the articular surface combined with a rigid internal fixation and early mobilisation have become the standard treatment of these injuries. Methods. We conducted a retrospective analysis of 22 patients of average age 43.13 years. The patients were treated by open reduction and internal fixation at the Orthopaedic Clinic of Niš from 2005-2009. The follow-up was 12 to 60 months, with the average of 21.18 months after surgery. Results. All injured patients were operated on between 4 and 11 days (5.7 days on the average. According to the classification by Judet and Letournel, 15 (68.18% patients had an elementary acetabular fracture, whereas 7 (31.82% patients had associated fracture. A satisfactory postoperative reduction implying less than 2 mm of displacement was achieved in 19 (86.36% patients. The radiological status of the hip joint, determined according to Matta score, was excellent in 15 (68.18% patients, good in 4 (18.18% patients and moderate in 3 (13.63% patients. According to Merle d’Aubigné Scale, the final functional results of the treatment of all operated patients were excellent in 12 (54.54% patients, good in 7 (31.81% patients and moderate in 3 (13.63% patients. Conclusion. Surgical treatment of dislocated acetabular fractures requires an open reduction and a stable internal fixation. Excellent and good results can be expected only if anatomical reduction and stable internal fixation are achieved.

  7. [Vestibularly displaced flap with bone augmentation].

    Science.gov (United States)

    Bakalian, V L

    2009-01-01

    The aim of this study is to achieve esthetic gingival contours with the help of less traumatic mucogingival surgeries. 9 Patients were operated with horizontal deficiencies in 9 edentulous sites, planned to be restored with fixed partial dentures. In all cases there was lack of keratinized tissues. Temporary bridges were fabricated to all patients. Before surgery the bridges were removed and the abutment teeth were additionally cleaned with ultrasonic device. A horizontal incision was made from lingual (palatal) side between the abutment teeth, which was connected with two vertical releasing incisions to the mucogingival junction from the vestibular side. The horizontal incision was made on a distance 6-10 mm from the crest of the alveolar ridge. A partial thickness flap in the beginning 3-5 mm, then a full thickness flap up to the mucogingival junction, then a partial thickness flap was made. The flap was mobilized and displaced vestibularly. In the apical part the cortical bone was perforated, graft material was put and the flap was sutured. In all 9 cases the horizontal defect was partially or fully eliminated. The width of the keratinized tissues was also augmented in all cases. The postoperative healing was without complications, discomfort and painless. The donor sites also healed without complications. The application of Solcoseryl Dental Adhesive Paste 3 times a day for 7-10 days helped for painless healing of the donor site. The offered method of soft tissue and bone augmentation is effective in the treatment of horizontal defects of edentulous alveolar ridges of not big sizes. It makes possible to achieve esthetic results without traumatizing an additional donor-site.

  8. Displacement of soil pore water by trichloroethylene

    Science.gov (United States)

    Wershaw, R. L.; Aiken, G.R.; Imbrigiotta, T.E.; Goldberg, M.C.

    1994-01-01

    Dense nonaqueous phase liquids (DNAPLS) are important pollutants because of their widespread use as chemical and industrial solvents. An example of the pollution caused by the discharge of DNAPLs is found at the Picatinny Arsenal, New Jersey, where trichloroethylene (TCE) has been discharged directly into the unsaturated zone. This discharge has resulted in the formation of a plume of TCE-contaminated water in the aquifer downgradient of the discharge. A zone of dark-colored groundwater containing a high dissolved organic C content has been found near the point of discharge of the TCE. The colored-water plume extends from the point of discharge at least 30 m (100 feet) downgradient. Fulvic acids isolated from the colored-waters plume, from water from a background well that has not been affected by the discharge of chlorinated solvents, and from soil pore water collected in a lysimeter installed at an uncontaminated site upgradient of the study area have been compared. Nuclear magnetic resonance spectra of the fulvic acids from the colored waters and from the lysimeter are very similar, but are markedly different from the nuclear magnetic resonance spectrum of the fulvic acid from the background well. The three-dimensional fluorescence spectrum and the DOC fractionation profile of the colored groundwater and the soil pore water are very similar to each other, but quite different from those of the background water. It is proposed from these observations that this colored water is soil pore water that has been displaced by a separate DNAPL liquid phase downward to the saturated zone.

  9. Land Restitution and Prevention of Forced Displacement in Colombia

    Directory of Open Access Journals (Sweden)

    Felipe Gómez-Isa

    2010-11-01

    Full Text Available The armed conflict in Colombia, which has generated over three million internally displaced persons, has dramatic humanitarian consequences and raises serious issues regarding the protection of displaced peoples’ rights. The underlying reasons for the displacement often lie in the dynamics associated with territorial control and land seizures undertaken for strategic, military or purely economic purposes. Domestic and international legal provisions have established the victims’ right to the restitution of their homes and property as the “preferred remedy” in cases of displacement. However, policies dealing with displacement, both those of the Colombian government and of several international institutions, fail to take this sufficiently into account. A comprehensive reparation policy for victims must necessarily entail the reversion of lands, territories and goods seized in Colombia under the pretext of the internal armed conflict.

  10. Displacement of maxillary third molar into the lateral pharyngeal space.

    Science.gov (United States)

    Lee, Doksa; Ishii, Syoichiro; Yakushiji, Noboru

    2013-10-01

    Iatrogenic tooth displacement is a rare complication during extraction of impacted molars, but displacement of a maxillary third molar into the maxillary sinus, infratemporal fossa, buccal space, pterygomandibular space, and lateral pharyngeal space has been reported. Currently, 6 published reports describe third molar displacement into the lateral pharyngeal space, only 1 of which involved the loss of a maxillary third molar into this area, which occurred after an attempted self-extraction by the patient. There have been no reported cases of iatrogenic displacement of the maxillary third molar during an extraction procedure. This article describes the recovery, under general anesthesia, of a maxillary third molar from the lateral pharyngeal space after an iatrogenic displacement.

  11. Performance of ductless personalized ventilation in conjunction with displacement ventilation

    DEFF Research Database (Denmark)

    Dalewski, Mariusz; Melikov, Arsen Krikor; Vesely, Michal

    2014-01-01

    The performance of ductless personalized ventilation (DPV) in conjunction with displacement ventilation was studied and compared with displacement ventilation alone and mixing ventilation. Thirty subjects were exposed in a climate chamber to environmental conditions representing three levels...... perception of the environment. The subjects could control the position of the DPV supply diffuser and the personalized air flow (air velocity). The use of DPV improved perceived air quality and thermal comfort compared to displacement ventilation alone. At 26 °C and 29 °C the percentage dissatisfied with air...... movement decreased with DPV compared to corresponding conditions with displacement ventilation alone and reached the same level as mixing or displacement ventilation at 23 °C. Subjects were able to control the volume and speed of the personalized air flow in order to avoid eye irritation. However...

  12. Human response to ductless personalized ventilation coupled with displacement ventilation

    DEFF Research Database (Denmark)

    Dalewski, Mariusz; Veselý, Michal; Melikov, Arsen K.

    2012-01-01

    A human subject experiment was carried out to investigate the extent to which ductless personalized ventilation (DPV) in conjunction with displacement ventilation can improve perceived air quality (PAQ) and thermal comfort at elevated room air temperature in comparison with displacement ventilation...... alone. The experimental conditions comprised displacement ventilation alone (room air temperature of 23 °C, 26 °C, 29 °C) and DPV with displacement ventilation (26 °C, 29 °C), both operating at supply air temperatures 3, 5 or 6K lower than room air temperature, as well as mixing ventilation (23 °C, 3 K......). During one hour exposure participants answered questionnaires regarding PAQ and thermal comfort. PAQ was significantly better with DPV than without DPV at the same background conditions. Thermal comfort improved when DPV was used. Combining DPV with displacement ventilation showed the potential...

  13. Prediction of ground surface displacement caused by grouting

    Institute of Scientific and Technical Information of China (English)

    郭风琪; 刘晓潭; 童无期; 单智

    2015-01-01

    Ground surface displacement caused by grouting was calculated with stochastic medium theory. Ground surface displacement was assumed to be caused by the cavity expansion of grouting, slurry seepage, and slurry contraction. A prediction method of ground surface displacement was developed. The reliability of the presented method was validated through a comparison between theoretical results and results from engineering practice. Results show that the present method is effective. The effect of parameters on uplift displacement was illustrated under different grouting conditions. Through analysis, it can be known that the ground surface uplift is mainly caused by osmosis of slurry and the primary influence angle of stratum βdetermines the influence range of surface uplift. Besides, the results show that ground surface uplift displacement decreases notably with increasing depth of the grouting cavity but it increases with increasing diffusion radius of grout and increasing grouting pressure.

  14. CVN 68 Class Displacement Concerns; Dealing with the Differences between the Modeled and Actual Displacements

    Science.gov (United States)

    2009-09-01

    It is the second case that is most important for a ship in the water. It has been referred to as a special case of Archimedes ’ Principle , or the...from the bottom of the block to the waterline. Figure 6. Wooden block in water As described above using Archimedes ’ Principle , the weight of the...carrier. Archimedes ’ Law was discussed, as well as how this principle is applied to the displacement of an object in a body of water. The application

  15. Single Atom Plasmonic Switch

    CERN Document Server

    Emboras, Alexandros; Ma, Ping; Haffner, Christian; Luisier, Mathieu; Hafner, Christian; Schimmel, Thomas; Leuthold, Juerg

    2015-01-01

    The atom sets an ultimate scaling limit to Moores law in the electronics industry. And while electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling-similar to electronics-is only limited by the atom. More precisely, we introduce an electrically controlled single atom plasmonic switch. The switch allows for fast and reproducible switching by means of the relocation of an individual or at most - a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ration of 10 dB and operation at room temperature with femtojoule (fJ) power consumption for a single switch operation. This demonstration of a CMOS compatible, integrated quantum device allowing to control photons at the single-atom level opens intriguing perspectives for a fully i...

  16. Spontaneous spherical symmetry breaking in atomic confinement

    CERN Document Server

    Sveshnikov, K

    2016-01-01

    The effect of spontaneous breaking of initial SO(3) symmetry is shown to be possible for an H-like atom in the ground state, when it is confined in a spherical box under general boundary conditions of "not going out" through the box surface (i.e. third kind or Robin's ones), for a wide range of physically reasonable values of system parameters. The reason is that such boundary conditions could yield a large magnitude of electronic wavefunction in some sector of the box boundary, what in turn promotes atomic displacement from the box center towards this part of the boundary, and so the underlying SO(3) symmetry spontaneously breaks. The emerging Goldstone modes, coinciding with rotations around the box center, restore the symmetry by spreading the atom over a spherical shell localized at some distances from the box center. Atomic confinement inside the cavity proceeds dynamically -- due to the boundary condition the deformation of electronic wavefunction near the boundary works as a spring, that returns the at...

  17. Determining Fault Geometries From Surface Displacements

    Science.gov (United States)

    Volkov, D.; Voisin, C.; Ionescu, I. R.

    2017-02-01

    We introduce a new algorithm for determining the geometry of active parts of faults. This algorithm uses surface measurements of displacement fields and local modeling of the Earth's crust as a half-space elastic medium. The numerical method relies on iterations alternating non-linear steps for recovering the geometry and linear steps for reconstructing slip fields. Our algorithm greatly improves upon past attempts at reconstructing fault profiles. We argue that these past attempts suffered from either the restrictive assumption that the geometry of faults can be derived using only uniformly constant slips or that they relied on arbitrary assumptions on the statistics of the reconstruction error. We test this algorithm on the 2006 Guerrero, Mexico, slow slip event (SSE) and on the 2009 SSE for the same region. These events occurred on a relatively well-known subduction zone, whose geometry was derived from seismicity and gravimetric techniques, see Kostoglodov et al. (Geophys Res Lett 23(23):3385-3388, 1996), Pardo and Suarez (J Geophys Res 100(B7):357-373, 1995), Singh and Pardo (Geophys Res Lett 20(14):1483-1486, 1993), so our results can be compared to known benchmarks. Our derived geometry is found to be consistent with these benchmarks regarding dip and strike angles and the positioning of the North American Trench. In addition, our derived slip distribution is also consistent with previous studies (all done with an assumed fixed geometry), see Larson et al. (Geophys Res Lett 34(13), 2007), Bekaert et al. (J Geophys Res: Solid Earth 120(2):1357-1375, 2015), Radiguet et al. (Geophys J Int 184(2):816-828, 2011, J Geophys Res 2012), Rivet et al. (Geophys Res Lett 38(8), 2011), Vergnolle et al. (J Geophys Res: Solid Earth 115(B8), 2010), Walpersdorf et al. Geophys Res Lett 38(15), 2011), to name a few. We believe that the new computational inverse method introduced in this paper holds great promise for applications to blind inversion cases, where both geometry and

  18. Atomistic simulations of displacement cascades in Y{sub 2}O{sub 3} single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Dholakia, Manan, E-mail: manan@igcar.gov.in [Materials Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India); Chandra, Sharat [Materials Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India); Valsakumar, M.C. [School of Engineering Sciences and Technology, University of Hyderabad, Hyderabad 500 046 (India); Mathi Jaya, S. [Materials Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India)

    2014-11-15

    Graphical abstract: (a) The averaged distortion index and the Y–O bond length of the Y{sub 2}O{sub 3} octahedra as a function of the simulation time for 5 keV PKA. (b) Shows the nearest neighbourhood of one of the Y ions as a function of simulation time, showing the destruction and the recovery of the YO{sub 6} octahedron during the cascade corresponding to 5 keV Y PKA. - Highlights: • Qualitative difference in displacement cascades exists for Y and O PKA. • Nearest neighbour correlation between Y and O ions exists even at cascade peak. • Cascade core in Y{sub 2}O{sub 3} does not undergo melting. • Topological connectivity of YO{sub 6} polyhedra plays important role in stability of Y{sub 2}O{sub 3}. - Abstract: We study the characteristics of displacement cascades in single crystal Y{sub 2}O{sub 3} using classical molecular dynamics. There are two possible ways to generate the cascades in yttria, using either the Y or the O atoms as the primary knock-on (PKA) atom. It is shown that there is a qualitative difference in the characteristics of the cascades obtained in these two cases. Even though the crystal is seen to be in a highly disordered state in the cascade volume, as seen from the plots of radial distribution function, the correlation between the Y and O atoms is not completely lost. This facilitates a quick recovery of the system during the annealing phase. Topological connectivity of the YO{sub 6} polyhedral units plays an important role in imparting stability to the Y{sub 2}O{sub 3} crystal. These characteristics of the cascades can help explain the stability of the yttria nanoparticles when they are dispersed in oxide dispersion strengthened steels.

  19. Long range intermolecular forces in triatomic systems: connecting the atom-diatom and atom-atom-atom representations

    OpenAIRE

    2005-01-01

    The long-range forces that act between three atoms are analysed in both atom-diatom and atom-atom-atom representations. Expressions for atom-diatom dispersion coefficients are obtained in terms of 3-body nonadditive coefficients. The anisotropy of atom-diatom C_6 dispersion coefficients arises primarily from nonadditive triple-dipole and quadruple-dipole forces, while pairwise-additive forces and nonadditive triple-dipole and dipole-dipole-quadrupole forces contribute significantly to atom-di...

  20. Wide-range displacement expressions for standard fracture mechanics specimens

    Science.gov (United States)

    Kapp, J. A.; Gross, B.; Leger, G. S.

    1985-01-01

    Wide-range algebraic expressions for the displacement of cracked fracture mechanics specimens are developed. For each specimen two equations are given: one for the displacement as a function of crack length, the other for crack length as a function of displacement. All the specimens that appear in ASTM Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399) are represented in addition to the crack mouth displacement for a pure bending specimen. For the compact tension sample and the disk-shaped compact tension sample, the displacement at the crack mouth and at the load line are both considered. Only the crack mouth displacements for the arc-shaped tension samples are presented. The agreement between the displacements or crack lengths predicted by the various equations and the corresponding numerical data from which they were developed are nominally about 3 percent or better. These expressions should be useful in all types of fracture testing including fracture toughness, K-resistance, and fatigue crack growth.

  1. Development of a Wireless Displacement Measurement System Using Acceleration Responses

    Directory of Open Access Journals (Sweden)

    Billie F. Spencer Jr.

    2013-07-01

    Full Text Available Displacement measurements are useful information for various engineering applications such as structural health monitoring (SHM, earthquake engineering and system identification. Most existing displacement measurement methods are costly, labor-intensive, and have difficulties particularly when applying to full-scale civil structures because the methods require stationary reference points. Indirect estimation methods converting acceleration to displacement can be a good alternative as acceleration transducers are generally cost-effective, easy to install, and have low noise. However, the application of acceleration-based methods to full-scale civil structures such as long span bridges is challenging due to the need to install cables to connect the sensors to a base station. This article proposes a low-cost wireless displacement measurement system using acceleration. Developed with smart sensors that are low-cost, wireless, and capable of on-board computation, the wireless displacement measurement system has significant potential to impact many applications that need displacement information at multiple locations of a structure. The system implements an FIR-filter type displacement estimation algorithm that can remove low frequency drifts typically caused by numerical integration of discrete acceleration signals. To verify the accuracy and feasibility of the proposed system, laboratory tests are carried out using a shaking table and on a three storey shear building model, experimentally confirming the effectiveness of the proposed system.

  2. Two conceptual models of displacement transfer and examples

    Institute of Scientific and Technical Information of China (English)

    GUAN; Shuwei; WANG; Xin; YANG; Shufeng; HE; Dengfa; ZHAO; W

    2005-01-01

    This paper presents two conceptual models of displacement transfer, reverse symmetry model and infinitely equal division model, based on the fault-bend folding theory. If the fault shape is held constant in the trend, then the distribution of slip magnitude, geometry of imbricate structures and its axial surface map all display reverse symmetry on the process of displacement transfer, as called reverse symmetry model in this paper. However, if the ramp height of thrust fault decreases gradually along its strike, the displacement is postulated to be equally and infinitely divided to every thrust that is formed subsequently, this kinematic process is described using infinitely equal division model. In both models, displacement transfer is characterized by the regular changes of imbricate thrusting in the trend. Geometric analysis indicates that the displacement transfer grads can be estimated using the tangent of deflective angle of hinterland structures. Displacement transfer is often responsible for the distortion and branching of the surface anticlines, especially in the region where the multi-level detachment structures is developed. We also present some examples from the frontal structures of the Southern Tianshan fold-and-thrust belt, Xinjiang, China. Displacement transfer between deep imbricate thrusts in the middle segment of Qiulitag anticline zone causes the Kuqatawu and Southern Qiulitag deep anticlines left-lateral echelon. The region, where these two deep anticlines overlap, is characterized by duplex structures, and extends about 18 km. The shallow anticline is migrated southward displaying obvious "S" form in this area.

  3. A method to calculate displacement factors using SVM

    Institute of Scientific and Technical Information of China (English)

    Li Peixian; Tan Zhixiang; Yan Lili; Deng Kazhong

    2011-01-01

    In order to improve the precision of mining subsidence prediction,a mathematical model using Support Vector Machine (SVM) was established to calculate the displacement factor.The study is based on a comprehensive analysis of factors affecting the displacement factor,such as mechanical properties of the cover rock,the ratio of mining depth to seam thickness,dip angle of the coal seam and the thickness of loose layer.Data of 63 typical observation stations were used as a training and testing sample set.A SVM regression model of the displacement factor and the factors affecting it was established with a kernel function,an insensitive loss factor and a properly selected penalty factor.Given an accurate calculation algorithm for testing and analysis,the results show that an SVM regression model can calculate displacement factor precisely and reliable precision can be obtained which meets engineering requirements.The experimental results show that the method to calculation of the displacement factor,based on the SVM method,is feasible.The many factors affecting the displacement factor can be considered with this method.The research provides an efficient and accurate approach for the calculation of displacement in mining subsidence prediction.

  4. Inhomogeneous phase shifting: an algorithm for nonconstant phase displacements

    Energy Technology Data Exchange (ETDEWEB)

    Tellez-Quinones, Alejandro; Malacara-Doblado, Daniel

    2010-11-10

    In this work, we have developed a different algorithm than the classical one on phase-shifting interferometry. These algorithms typically use constant or homogeneous phase displacements and they can be quite accurate and insensitive to detuning, taking appropriate weight factors in the formula to recover the wrapped phase. However, these algorithms have not been considered with variable or inhomogeneous displacements. We have generalized these formulas and obtained some expressions for an implementation with variable displacements and ways to get partially insensitive algorithms with respect to these arbitrary error shifts.

  5. Displacement fields denoising and strains extraction by finite element method

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Optical full-field measurement methods are now widely applied in various domains. In general,the displacement fields can be directly obtained from the measurement,however in mechanical analysis strain fields are preferred.To extract strain fields from noisy displacement fields is always a challenging topic.In this study,a finite element method for smoothing displacement fields and calculating strain fields is proposed.An experimental test case on a holed aluminum specimen under tension is applied to vali...

  6. Serial forced displacement in American cities, 1916-2010.

    Science.gov (United States)

    Fullilove, Mindy Thompson; Wallace, Rodrick

    2011-06-01

    Serial forced displacement has been defined as the repetitive, coercive upheaval of groups. In this essay, we examine the history of serial forced displacement in American cities due to federal, state, and local government policies. We propose that serial forced displacement sets up a dynamic process that includes an increase in interpersonal and structural violence, an inability to react in a timely fashion to patterns of threat or opportunity, and a cycle of fragmentation as a result of the first two. We present the history of the policies as they affected one urban neighborhood, Pittsburgh's Hill District. We conclude by examining ways in which this problematic process might be addressed.

  7. Perceived Air Quality in a Displacement Ventilated Room

    DEFF Research Database (Denmark)

    Brohus, Henrik; Knudsen, Henrik Nellemose; Nielsen, Peter V.

    In a displacement ventilated room the non-uniform contaminant distribution causes an improved indoor air quality in the occupied zone compared with conventional mixing ventilation. This has been demonstrated in numerous studies by chemical measurements. In this study the air quality...... in a displacement ventilated room was determined directly by asking humans about how they perceived the air quality. A trained sensory panel comprising 12 subjects assessed the perceived air quality immediately after entering a climate chamber. The experiments showed that the perceived air quality...... in the displacement ventilated chamber was substantially better than in the case of mixing ventilation....

  8. Uncovering deformation processes from surface displacements

    Science.gov (United States)

    Stramondo, Salvatore

    2013-04-01

    The aim of this talk is to provide an overview about the most recent outcomes in Earth Sciences, describe the role of satellite remote sensing, together with GPS, ground measurement and further data, for geophysical parameter retrieval in well known case studies where the combined approach dealing with the use of two or more techniques/datasets have demonstrated their effectiveness. The Earth Sciences have today a wide availability of instruments and sensors able to provide scientists with an unprecedented capability to study the physical processes driving earthquakes, volcanic eruptions, landslides, and other dynamic Earth systems. Indeed measurements from satellites allow systematic observation of the Earth surface covering large areas, over a long time period and characterized by growing sample intervals. Interferometric Synthetic Aperture Radar (InSAR) technique has demonstrated its effectiveness to investigate processes responsible for crustal faulting stemming from the detection of surface deformation patterns. Indeed using satellite data along ascending and descending orbits, as well as different incident angles, it is possible in principle to retrieve the full 3D character of the ground motion. To such aim the use of GPS stations providing 3D displacement components is a reliable complementary instrument. Finally, offset tracking techniques and Multiple Aperture Interferometry (MAI) may provide a contribution to the analysis of horizontal and NS deformation vectors. The estimation of geophysical parameters using InSAR has been widely discussed in seismology and volcanology, and also applied to deformation associated with groundwater and other subsurface fluids. These applications often involve the solution of an inverse problem, which means the retrieval of optimal source parameters at depth for volcanoes and earthquakes, from the knowledge of surface deformation from InSAR. In recent years, InSAR measurements combined with traditional seismological and

  9. Atomic homodyne detection of weak atomic transitions.

    Science.gov (United States)

    Gunawardena, Mevan; Elliott, D S

    2007-01-26

    We have developed a two-color, two-pathway coherent control technique to detect and measure weak optical transitions in atoms by coherently beating the transition amplitude for the weak transition with that of a much stronger transition. We demonstrate the technique in atomic cesium, exciting the 6s(2)S(1/2) --> 8s(2)S(1/2) transition via a strong two-photon transition and a weak controllable Stark-induced transition. We discuss the enhancement in the signal-to-noise ratio for this measurement technique over that of direct detection of the weak transition rate, and project future refinements that may further improve its sensitivity and application to the measurement of other weak atomic interactions.

  10. The Software Atom

    CERN Document Server

    Javanainen, Juha

    2016-01-01

    By putting together an abstract view on quantum mechanics and a quantum-optics picture of the interactions of an atom with light, we develop a corresponding set of C++ classes that set up the numerical analysis of an atom with an arbitrary set of angular-momentum degenerate energy levels, arbitrary light fields, and an applied magnetic field. As an example, we develop and implement perturbation theory to compute the polarizability of an atom in an experimentally relevant situation.

  11. The Software Atom

    Science.gov (United States)

    Javanainen, Juha

    2017-03-01

    By putting together an abstract view on quantum mechanics and a quantum-optics picture of the interactions of an atom with light, we develop a corresponding set of C++ classes that set up the numerical analysis of an atom with an arbitrary set of angular-momentum degenerate energy levels, arbitrary light fields, and an applied magnetic field. As an example, we develop and implement perturbation theory to compute the polarizability of an atom in an experimentally relevant situation.

  12. Advances in atomic spectroscopy

    CERN Document Server

    Sneddon, J

    1997-01-01

    This series describes selected advances in the area of atomic spectroscopy. It is primarily intended for the reader who has a background in atmoic spectroscopy; suitable to the novice and expert. Although a widely used and accepted method for metal and non-metal analysis in a variety of complex samples, Advances in Atomic Spectroscopy covers a wide range of materials. Each Chapter will completely cover an area of atomic spectroscopy where rapid development has occurred.

  13. Advances in atomic spectroscopy

    CERN Document Server

    Sneddon, J

    1995-01-01

    This series describes selected advances in the area of atomic spectroscopy. It is promarily intended for the reader who has a background in atmoic spectroscopy; suitable to the novice and expert. Although a widely used and accepted method for metal and non-metal analysis in a variety of complex samples, Advances in Atomic Spectroscopy covers a wide range of materials. Each Chapter will completely cover an area of atomic spectroscopy where rapid development has occurred.

  14. Atomicity in Electronic Commerce,

    Science.gov (United States)

    1996-01-01

    tremendous demand for the ability to electronically buy and sell goods over networks. Electronic commerce has inspired a large variety of work... commerce . It then briefly surveys some major types of electronic commerce pointing out flaws in atomicity. We pay special attention to the atomicity...problems of proposals for digital cash. The paper presents two examples of highly atomic electronic commerce systems: NetBill and Cryptographic Postage Indicia.

  15. Atoms confined in a penetrable potential: effect of the atom position on the electric and magnetic responses

    Energy Technology Data Exchange (ETDEWEB)

    Acosta Coden, Diego S; Gomez, Sergio S; Romero, Rodolfo H, E-mail: rhromero@exa.unne.edu.ar [Instituto de Modelado e Innovacion Tecnologica, CONICET and Facultad de Ciencias Exactas y Naturales y Agrimensura, Universidad Nacional del Nordeste, Avenida Libertad 5500 (3400) Corrientes (Argentina)

    2011-02-14

    We report results of the calculation of polarizability and the nuclear magnetic shielding tensors of two-electron atoms confined within an attractive Gaussian potential well. The electric and magnetic responses are obtained within the random phase approximation (RPA) of the polarization propagator. The influence of the depth and range of the potential on the electronic structure is also studied. The dependence of the parallel (along the displacement) and perpendicular components of the polarizability and shielding tensors on the distance of the atom to the centre of the well is calculated and rationalized as a dissociation-type process of the artificial diatomic molecule formed between the Coulomb and the well potentials.

  16. Dephasing in an atom

    OpenAIRE

    2011-01-01

    When an atom in vacuum is near a surface of a dielectric the energy of a fluctuating electromagnetic field depends on a distance between them resulting, as known, in the force called van der Waals one. Besides this fluctuation phenomenon there is one associated with formation of a mean electric field which is equivalent to an order parameter. In this case atomic electrons are localized within atomic distances close to the atom and the total ground state energy is larger, compared to the bare ...

  17. Evolution of specialization and ecological character displacement: metabolic plasticity matters.

    NARCIS (Netherlands)

    Egas, C.J.M.; Reydon, Th.A.C.; Hemerik, L.

    2005-01-01

    An important question in evolutionary biology, especially with respect to herbivorous arthropods, is the evolution of specialization. In a previous paper, the combined evolutionary dynamics of specialization and ecological character displacement was studied, focusing on the role of herbivore foragin

  18. The displaced claiming their rights in fragile states

    Directory of Open Access Journals (Sweden)

    Antonia Mulvey

    2013-05-01

    Full Text Available To date, displaced persons in fragile and conflict-affected stateshave had little success in claiming their rights for housing, land andproperty violations. Creative legal thinking and strategic litigation has the potential to change this.

  19. Measurement of local relative displacements in large structures

    DEFF Research Database (Denmark)

    Tesauro, Angelo; Eder, Martin Alexander; Nielsen, Magda

    2014-01-01

    This paper presents a novel measurement technique to measure local relative displacements between parts of large-scale structures. The measured deformations can be of significant importance for fracture analyses in many different types of structures in general, and for adhesive connections...... in particular. The measurement of small local relative displacements in structures subjected to large global deformations is complex and hardly feasible with conventional measurement methods. Therefore, a Small Displacement Measurement System (SDMS) has been devised. The SDMS is based on stereo photogrammetry...... and capable of measuring 3D local displacements with a high degree of accuracy. In this article, the technique is used to measure local deformations in the vicinity of the adhesive trailing edge joint of a wind turbine rotor blade. The SDMS results correspond well with another independent measurement method....

  20. Health outcomes of crisis driven urban displacement: A conceptual framework.

    Science.gov (United States)

    Deola, Claudio; Patel, Ronak B

    2014-01-01

    With urbanisation, cities are increasingly home to greater proportions of the world's population. As this transition has significant implications on human health, the epidemiology of diseases among relatively stable urban populations is growing. As humanitarian crises increasingly drive people to urban centers rather than traditional refugee camps, however, rapid and massive urban displacements will increase in frequency. This paper explores the idea that such urban displacements combine epidemiological features of forced migration, slum conditions and humanitarian disaster contexts. This paper highlights the lack of primary data and the consequent paucity of solid epidemiological literature in the aftermath of rapid massive urban displacements. A framework of health outcomes in urban displacement drawing from the above 3 phenomenon is presented and avenues for improved epidemiologic work described.

  1. Zooplankton Displacement Volume in Glacier Bay, Alaska, 2004

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset includes zooplankton displacement volume sampled in Glacier Bay National Park during summer of 2004. Zooplankton were sampled with a multinet with a 0.5...

  2. Analytical Modeling for the Grating Eddy Current Displacement Sensors

    Directory of Open Access Journals (Sweden)

    Lv Chunfeng

    2015-02-01

    Full Text Available As a new type of displacement sensor, grating eddy current displacement sensor (GECDS combines traditional eddy current sensors and grating structure in one. The GECDS performs a wide range displacement measurement without precision reduction. This paper proposes an analytical modeling approach for the GECDS. The solution model is established in the Cartesian coordinate system, and the solving domain is limited to finite extents by using the truncated region eigenfunction expansion method. Based on the second order vector potential, expressions for the electromagnetic field as well as coil impedance related to the displacement can be expressed in closed-form. Theoretical results are then confirmed by experiments, which prove the suitability and effectiveness of the analytical modeling approach.

  3. Job displacement and stress-related health outcomes

    DEFF Research Database (Denmark)

    Browning, Martin; Danø, Anne Møller; Heinesen, Eskil

    2006-01-01

    We investigate whether job loss as the result of displacement causes hospitalization for stress-related diseases which are widely thought to be associated with unemployment. In doing this, we use much better data than any previous investigators. Our data are a random 10% sample of the male...... population of Denmark for the years 1981-1999 with full records on demographics, health and work status for each person, and with a link from every working person to a plant. We use the method of matching on observables to estimate the counter-factual of what would have happened to the health of a particular...... group of displaced workers if they had not in fact been displaced. Our results indicate unequivocally that being displaced in Denmark does not cause hospitalization for stress-related disease. An analysis of the power of our test suggests that even though we are looking for a relatively rare outcome...

  4. Vertical Crustal Displacements Due to Surface Fluid Changes

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shiyu; ZHONG Min

    2007-01-01

    Using the model data for surface mass changes of the atmosphere, ocean, soil moisture and snow depth, the vertical crustal displacements of 25 ficual stations in China were calculated according to the loading theory. From the spectral analysis of the results, we can see that the periods of displacements are 12 months and the semi-periods are 6 months. The results also show that the maximum seasonal displacements can reach 20 mm and even larger. The covariance analyses and significance tests show that the coefficients of 96 percent of the stations are significant at the 0.1 significance level. The results show that one of the reasons of the vertical crustal displacements is the changing surface fluid loads.

  5. Brake Pedal Displacement Measuring System based on Machine Vision

    Directory of Open Access Journals (Sweden)

    Chang Wang

    2013-10-01

    Full Text Available Displacement of brake pedal was an important characteristic of driving behavior. This paper proposed a displacement measure algorithm based on machine vision. Image of brake pedal was captured by camera from left side, and images were processed in industry computer. Firstly, average smooth algorithm and wavelet transform algorithm were used to smooth the original image consecutively. Then, edge extracting method which combined Roberts’s operator with wavelet analysis was used to identify the edge of brake pedal. At last, least square method was adopted to recognize the characteristic line of brake pedal’s displacement. The experimental results demonstrated that the proposed method takes the advantages of Roberts’s operator and wavelet transform, it can obtain better measurement result as well as linear displacement sensors

  6. Peace in Colombia and solutions for its displaced people

    Directory of Open Access Journals (Sweden)

    Martin Gottwald

    2016-05-01

    Full Text Available With the prospect of peace comes the need to find solutions for those displaced during 50 years of fighting. Solutions will not come without comprehensive attention to the factors affecting IDPs and refugees.

  7. Displacement of Building Cluster Using Field Analysis Method

    Institute of Scientific and Technical Information of China (English)

    Al Tinghua

    2003-01-01

    This paper presents a field based method to deal with the displacement of building cluster,which is driven by the street widening. The compress of street boundary results in the force to push the building moving inside and the force propagation is a decay process. To describe the phenomenon above, the field theory is introduced with the representation model of isoline. On the basis of the skeleton of Delaunay triangulation,the displacement field is built in which the propagation force is related to the adjacency degree with respect to the street boundary. The study offers the computation of displacement direction and offset distance for the building displacement. The vector operation is performed on the basis of grade and other field concepts.

  8. Health outcomes of crisis driven urban displacement: A conceptual framework

    Science.gov (United States)

    Deola, Claudio; Patel, Ronak B

    2014-01-01

    With urbanisation, cities are increasingly home to greater proportions of the world's population. As this transition has significant implications on human health, the epidemiology of diseases among relatively stable urban populations is growing. As humanitarian crises increasingly drive people to urban centers rather than traditional refugee camps, however, rapid and massive urban displacements will increase in frequency. This paper explores the idea that such urban displacements combine epidemiological features of forced migration, slum conditions and humanitarian disaster contexts. This paper highlights the lack of primary data and the consequent paucity of solid epidemiological literature in the aftermath of rapid massive urban displacements. A framework of health outcomes in urban displacement drawing from the above 3 phenomenon is presented and avenues for improved epidemiologic work described. PMID:28229003

  9. Analysis of variance of an underdetermined geodetic displacement problem

    Energy Technology Data Exchange (ETDEWEB)

    Darby, D.

    1982-06-01

    It has been suggested recently that point displacements in a free geodetic network traversing a strike-slip fault may be estimated from repeated surveys by minimizing only those displacement components normal to the strike. It is desirable to justify this procedure. We construct, from estimable quantities, a deformation parameter which is an F-statistic of the type occurring in the analysis of variance of linear models not of full rank. A test of its significance provides the criterion to justify the displacement solution. It is also interesting to study its behaviour as one varies the supposed strike of the fault. Justification of a displacement solution using data from a strike-slip fault is found, but not for data from a rift valley. The technique can be generalized to more complex patterns of deformation such as those expected near the end-zone of a fault in a dislocation model.

  10. A novel approach to modeling unstable EOR displacements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Peters, E.J.

    1994-04-01

    Most enhanced oil recovery schemes involve the displacement of a more dense and more viscous oil by a less dense and less viscous fluid in a heterogeneous porous medium. The interaction of heterogeneity with the several competing forces, namely, viscous, capillary, gravitational, and dispersive forces, can conspire to make the displacements unstable and difficult to model and to predict. The objective of this research was to develop a systematic methodology for modeling unstable fluid displacements in heterogeneous media. Flow visualization experiments were conducted using X-ray computed tomography imaging and a video imaging workstation to gain insights into the dynamics of unstable displacements, acquire detailed quantitative experimental image data for calibrating numerical models of unstable displacements, and image and characterize heterogeneities in laboratory cores geostatistically. High-resolution numerical models modified for use on vector-architecture supercomputers were used to replicate the image data. Geostatistical models of reservoir heterogeneity were incorporated in order to study the interaction of hydrodynamic instability and heterogeneity in reservoir displacements. Finally, a systematic methodology for matching the experimental data with the numerical models and scaling the laboratory results to other systems were developed. The result is a new method for predicting the performance of unstable EOR displacements in the field based on small-scale displacements in the laboratory. The methodology is general and can be applied to forecast the performance of most processes that involve fluid flow and transport in porous media. Therefore, this research should be of interest to those involved in forecasting the performance of enhanced oil recovery processes and the spreading of contaminants in heterogeneous aquifers.

  11. Neural processing-type displacement sensor employing multimode waveguide

    Science.gov (United States)

    Aisawa, Shigeki; Noguchi, Kazuhiro; Matsumoto, Takao

    1991-04-01

    A novel neural processing-type displacement sensor, consisting of a multimode waveguide and a neural network, is demonstrated. This sensor detects displacement using changes in the interference output image of the waveguide. The interference image is directly processed by a three-layer perceptron neural network. Environmental change, such as the intensity fluctuation, and change of the temperature can be followed by training the neural network. Experimental results show that the sensor has a resolution of 1 micron.

  12. Urban revitalization and displacement: types, causes, and public policy

    Energy Technology Data Exchange (ETDEWEB)

    Feagin, J.R.

    1981-05-01

    The policy research report reviews the scholarly and print media literatures on urban revitalization. The extent of revitalization; the incumbent or occupant upgrading; gentrification (displacement of low- and moderate-income households by better-off households); gentrification and displacement from all causes; and the role of powerful actors in revitalization are discussed. Public policy dealing with land use and development in urban areas is discussed. Future research needs are indicated.

  13. Semen Displacement as a Sperm Competition Strategy in Humans

    Directory of Open Access Journals (Sweden)

    Gordon G. Gallup

    2004-01-01

    Full Text Available We examine some of the implications of the possibility that the human penis may have evolved to compete with sperm from other males by displacing rival semen from the cervical end of the vagina prior to ejaculation. The semen displacement hypothesis integrates considerable information about genital morphology and human reproductive behavior, and can be used to generate a number of interesting predictions.

  14. Measurement of axial injection displacement with trim coil current unbalance

    Science.gov (United States)

    Covo, Michel Kireeff

    2014-08-01

    The Dee probe used for measuring internal radial beam intensity shows large losses inside the radius of 20 cm of the 88 in. cyclotron. The current of the top and bottom innermost trim coil 1 is unbalanced to study effects of the axial injection displacement. A beam profile monitor images the ion beam bunches, turn by turn. The experimental bunch center of mass position is compared with calculations of the magnetic mirror effect displacement and shows good agreement.

  15. MRI anatomy of anteriorly displaced anus: what obstructs defecation?

    Energy Technology Data Exchange (ETDEWEB)

    AbouZeid, Amr Abdelhamid [Ain-Shams University, Department of Pediatric Surgery, Cairo (Egypt); Mohammad, Shaimaa Abdelsattar; Khairy, Khaled Talaat [Ain-Shams University, Department of Radiodiagnosis, Cairo (Egypt)

    2014-07-15

    Anteriorly displaced anus is an anomaly that is debated with regard to its nomenclature, diagnosis and management. To describe MRI anatomy of the anal canal in children with anteriorly displaced anus and its impact on the process of defecation. We prospectively examined ten children (7 girls, 3 boys; age range 7 months to 8 years, mean 3 years) with anteriorly displaced anus between August 2009 and April 2012. Noncontrast MRI examinations were performed on a 1.5-T magnet. T1- and T2-weighted turbo spin-echo images were acquired in axial, sagittal and coronal planes of the pelvis. The anorectal angle and the relative hiatal distance were measured in mid-sagittal images, and compared with those of a control group using the Mann-Whitney test. In children with anteriorly displaced anus, no anatomical abnormality was depicted at the level of the proximal anal canal. However, the distal anal canal was displaced anteriorly, running out its external muscle cuff, which remained un-displaced at the usual site of the anus. This changes the orientation of the central axis of the anal canal by passing across instead of along the fibers of the longitudinal muscle coat. Children with anteriorly displaced anus had a more obtuse anorectal angle (mean 112.1 ), which was significantly greater than that of the control group (mean 86.2 ). MRI is a valuable tool in studying the anatomy of the anal canal in children with anteriorly displaced anus. The abnormal orientation of the longitudinal muscle across the anal canal can explain the obstructed defecation in these children. Based on this study, it might be of interest to use MRI in studying equivocal cases and children with unexplained constipation. (orig.)

  16. Evanescent Wave Atomic Mirror

    Science.gov (United States)

    Ghezali, S.; Taleb, A.

    2008-09-01

    A research project at the "Laboratoire d'électronique quantique" consists in a theoretical study of the reflection and diffraction phenomena via an atomic mirror. This poster presents the principle of an atomic mirror. Many groups in the world have constructed this type of atom optics experiments such as in Paris-Orsay-Villetaneuse (France), Stanford-Gaithersburg (USA), Munich-Heidelberg (Germany), etc. A laser beam goes into a prism with an incidence bigger than the critical incidence. It undergoes a total reflection on the plane face of the prism and then exits. The transmitted resulting wave out of the prism is evanescent and repulsive as the frequency detuning of the laser beam compared to the atomic transition δ = ωL-ω0 is positive. The cold atomic sample interacts with this evanescent wave and undergoes one or more elastic bounces by passing into backward points in its trajectory because the atoms' kinetic energy (of the order of the μeV) is less than the maximum of the dipolar potential barrier ℏΩ2/Δ where Ω is the Rabi frequency [1]. In fact, the atoms are cooled and captured in a magneto-optical trap placed at a distance of the order of the cm above the prism surface. The dipolar potential with which interact the slow atoms is obtained for a two level atom in a case of a dipolar electric transition (D2 Rubidium transition at a wavelength of 780nm delivered by a Titane-Saphir laser between a fundamental state Jf = l/2 and an excited state Je = 3/2). This potential is corrected by an attractive Van der Waals term which varies as 1/z3 in the Lennard-Jones approximation (typical atomic distance of the order of λ0/2π where λ0 is the laser wavelength) and in 1/z4 if the distance between the atom and its image in the dielectric is big in front of λ0/2π. This last case is obtained in a quantum electrodynamic calculation by taking into account an orthornormal base [2]. We'll examine the role of spontaneous emission for which the rate is inversely

  17. Interaction between single gold atom and the graphene edge: A study via aberration-corrected transmission electron microscopy

    KAUST Repository

    Wang, Hongtao

    2012-01-01

    Interaction between single noble metal atoms and graphene edges has been investigated via aberration-corrected and monochromated transmission electron microscopy. A collective motion of the Au atom and the nearby carbon atoms is observed in transition between energy-favorable configurations. Most trapping and detrapping processes are assisted by the dangling carbon atoms, which are more susceptible to knock-on displacements by electron irradiation. Thermal energy is lower than the activation barriers in transition among different energy-favorable configurations, which suggests electron-beam irradiation can be an efficient way of engineering the graphene edge with metal atoms. © 2012 The Royal Society of Chemistry.

  18. Wettability controls slow immiscible displacement through local interfacial instabilities

    Science.gov (United States)

    Jung, Michael; Brinkmann, Martin; Seemann, Ralf; Hiller, Thomas; Sanchez de La Lama, Marta; Herminghaus, Stephan

    2016-11-01

    Immiscible fluid displacement with average front velocities in the capillary-dominated regime is studied in a transparent Hele-Shaw cell with cylindrical posts. Employing various combinations of fluids and wall materials allows us to cover a range of advancing contact angles 46∘≤θa≤180∘ of the invading fluid in our experiments. In parallel, we study the displacement process in particle-based simulations that account for wall wettability. Considering the same arrangement of posts in experiments and simulation, we find a consistent crossover between stable interfacial displacement at θa≲80∘ and capillary fingering at high contact angles θa≳120∘ . The position of the crossover is quantified through the evolution of the interface length and the final saturation of the displaced fluid. A statistical analysis of the local displacement processes demonstrates that the shape evolution of the fluid front is governed by local instabilities as proposed by Cieplak and Robbins for a quasistatic interfacial displacement [Cieplak and Robbins, Phys. Rev. Lett. 60, 2042 (1988), 10.1103/PhysRevLett.60.2042]. The regime of stable front advances coincides with a corresponding region of contact angles where cooperative interfacial instabilities prevail. Capillary fingering, however, is observed only for large θa, where noncooperative instabilities dominate the invasion process.

  19. Dual-frequency laser displacement and angle interferometer

    Science.gov (United States)

    Zhao, Shijie; Wei, Haoyun; Li, Yan

    2014-11-01

    Traditional laser angular interferometers based on a Michelson Interferometer or its modifications have the same principle: changing the angle displacement to an optical path difference. However, measuring the angular error of stage travels is a dynamic process. The main trouble is lack of displacement information and need to be solved urgently. A obvious method is using two dual-frequency interferometers to get the displacement and angular. In this paper, a new kind of displacement and angle interferometer (DIAI) is introduced. In this DIAI, displacement and angular are measured simultaneously by special optical path. The DIAI consists of a stabilized orthogonal polarization dualfrequency laser, a monolithic prism and additional optical and electronic components. The dual-frequency laser is divided into reference light and measurement light by a beam-splitting prism. The measurement light spatially separated into horizontal polarized light and vertical polarized light by the polarization splitting prism. Changing by a fixed 45°- tilted reflector, the vertical polarized light is parallel to the horizontal polarized light. These parallel lights reflected by two corner cube retroreflectors at a moving target. Compared with the reference light, the displacement and angular are measured. Different from the traditional method, there is only one reference corner cube retroreflector in this system. Thus, the angular measurement accuracy is better. The accuracy of the DIAI is better than +/-0.25 arcsec in comparison with an autocollimator.

  20. Technique for Determining Bridge Displacement Response Using MEMS Accelerometers.

    Science.gov (United States)

    Sekiya, Hidehiko; Kimura, Kentaro; Miki, Chitoshi

    2016-02-19

    In bridge maintenance, particularly with regard to fatigue damage in steel bridges, it is important to determine the displacement response of the entire bridge under a live load as well as that of each member. Knowing the displacement response enables the identification of dynamic deformations that can cause stresses and ultimately lead to damage and thus also allows the undertaking of appropriate countermeasures. In theory, the displacement response can be calculated from the double integration of the measured acceleration. However, data measured by an accelerometer include measurement errors caused by the limitations of the analog-to-digital conversion process and sensor noise. These errors distort the double integration results. Furthermore, as bridges in service are constantly vibrating because of passing vehicles, estimating the boundary conditions for the numerical integration is difficult. To address these problems, this paper proposes a method for determining the displacement of a bridge in service from its acceleration based on its free vibration. To verify the effectiveness of the proposed method, field measurements were conducted using nine different accelerometers. Based on the results of these measurements, the proposed method was found to be highly accurate in comparison with the reference displacement obtained using a contact displacement gauge.

  1. Technique for Determining Bridge Displacement Response Using MEMS Accelerometers

    Directory of Open Access Journals (Sweden)

    Hidehiko Sekiya

    2016-02-01

    Full Text Available In bridge maintenance, particularly with regard to fatigue damage in steel bridges, it is important to determine the displacement response of the entire bridge under a live load as well as that of each member. Knowing the displacement response enables the identification of dynamic deformations that can cause stresses and ultimately lead to damage and thus also allows the undertaking of appropriate countermeasures. In theory, the displacement response can be calculated from the double integration of the measured acceleration. However, data measured by an accelerometer include measurement errors caused by the limitations of the analog-to-digital conversion process and sensor noise. These errors distort the double integration results. Furthermore, as bridges in service are constantly vibrating because of passing vehicles, estimating the boundary conditions for the numerical integration is difficult. To address these problems, this paper proposes a method for determining the displacement of a bridge in service from its acceleration based on its free vibration. To verify the effectiveness of the proposed method, field measurements were conducted using nine different accelerometers. Based on the results of these measurements, the proposed method was found to be highly accurate in comparison with the reference displacement obtained using a contact displacement gauge.

  2. A Wireless Laser Displacement Sensor Node for Structural Health Monitoring

    Directory of Open Access Journals (Sweden)

    Se Woon Choi

    2013-09-01

    Full Text Available This study describes a wireless laser displacement sensor node that measures displacement as a representative damage index for structural health monitoring (SHM. The proposed measurement system consists of a laser displacement sensor (LDS and a customized wireless sensor node. Wireless communication is enabled by a sensor node that consists of a sensor module, a code division multiple access (CDMA communication module, a processor, and a power module. An LDS with a long measurement distance is chosen to increase field applicability. For a wireless sensor node driven by a battery, we use a power control module with a low-power processor, which facilitates switching between the sleep and active modes, thus maximizing the power consumption efficiency during non-measurement and non-transfer periods. The CDMA mode is also used to overcome the limitation of communication distance, which is a challenge for wireless sensor networks and wireless communication. To evaluate the reliability and field applicability of the proposed wireless displacement measurement system, the system is tested onsite to obtain the required vertical displacement measurements during the construction of mega-trusses and an edge truss, which are the primary structural members in a large-scale irregular building currently under construction. The measurement values confirm the validity of the proposed wireless displacement measurement system and its potential for use in safety evaluations of structural elements.

  3. A wireless laser displacement sensor node for structural health monitoring.

    Science.gov (United States)

    Park, Hyo Seon; Kim, Jong Moon; Choi, Se Woon; Kim, Yousok

    2013-09-30

    This study describes a wireless laser displacement sensor node that measures displacement as a representative damage index for structural health monitoring (SHM). The proposed measurement system consists of a laser displacement sensor (LDS) and a customized wireless sensor node. Wireless communication is enabled by a sensor node that consists of a sensor module, a code division multiple access (CDMA) communication module, a processor, and a power module. An LDS with a long measurement distance is chosen to increase field applicability. For a wireless sensor node driven by a battery, we use a power control module with a low-power processor, which facilitates switching between the sleep and active modes, thus maximizing the power consumption efficiency during non-measurement and non-transfer periods. The CDMA mode is also used to overcome the limitation of communication distance, which is a challenge for wireless sensor networks and wireless communication. To evaluate the reliability and field applicability of the proposed wireless displacement measurement system, the system is tested onsite to obtain the required vertical displacement measurements during the construction of mega-trusses and an edge truss, which are the primary structural members in a large-scale irregular building currently under construction. The measurement values confirm the validity of the proposed wireless displacement measurement system and its potential for use in safety evaluations of structural elements.

  4. Greek Atomic Theory.

    Science.gov (United States)

    Roller, Duane H. D.

    1981-01-01

    Focusing on history of physics, which began about 600 B.C. with the Ionian Greeks and reaching full development within three centuries, suggests that the creation of the concept of the atom is understandable within the context of Greek physical theory; so is the rejection of the atomic theory by the Greek physicists. (Author/SK)

  5. Atoms, Molecules, and Compounds

    CERN Document Server

    Manning, Phillip

    2007-01-01

    Explores the atoms that govern chemical processes. This book shows how the interactions between simple substances such as salt and water are crucial to life on Earth and how those interactions are predestined by the atoms that make up the molecules.

  6. Atomic Scale Plasmonic Switch.

    Science.gov (United States)

    Emboras, Alexandros; Niegemann, Jens; Ma, Ping; Haffner, Christian; Pedersen, Andreas; Luisier, Mathieu; Hafner, Christian; Schimmel, Thomas; Leuthold, Juerg

    2016-01-13

    The atom sets an ultimate scaling limit to Moore's law in the electronics industry. While electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling, similar to electronics, is only limited by the atom. More precisely, we introduce an electrically controlled plasmonic switch operating at the atomic scale. The switch allows for fast and reproducible switching by means of the relocation of an individual or, at most, a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ratio of 9.2 dB and operation at room temperature up to MHz with femtojoule (fJ) power consumption for a single switch operation. This demonstration of an integrated quantum device allowing to control photons at the atomic level opens intriguing perspectives for a fully integrated and highly scalable chip platform, a platform where optics, electronics, and memory may be controlled at the single-atom level.

  7. When Atoms Want

    Science.gov (United States)

    Talanquer, Vicente

    2013-01-01

    Chemistry students and teachers often explain the chemical reactivity of atoms, molecules, and chemical substances in terms of purposes or needs (e.g., atoms want or need to gain, lose, or share electrons in order to become more stable). These teleological explanations seem to have pedagogical value as they help students understand and use…

  8. Maximally Atomic Languages

    Directory of Open Access Journals (Sweden)

    Janusz Brzozowski

    2014-05-01

    Full Text Available The atoms of a regular language are non-empty intersections of complemented and uncomplemented quotients of the language. Tight upper bounds on the number of atoms of a language and on the quotient complexities of atoms are known. We introduce a new class of regular languages, called the maximally atomic languages, consisting of all languages meeting these bounds. We prove the following result: If L is a regular language of quotient complexity n and G is the subgroup of permutations in the transition semigroup T of the minimal DFA of L, then L is maximally atomic if and only if G is transitive on k-subsets of 1,...,n for 0 <= k <= n and T contains a transformation of rank n-1.

  9. Coaxial airblast atomizers

    Science.gov (United States)

    Hardalupas, Y.; Whitelaw, J. H.

    1993-01-01

    An experimental investigation was performed to quantify the characteristics of the sprays of coaxial injectors with particular emphasis on those aspects relevant to the performance of rocket engines. Measurements for coaxial air blast atomizers were obtained using air to represent the gaseous stream and water to represent the liquid stream. A wide range of flow conditions were examined for sprays with and without swirl for gaseous streams. The parameters varied include Weber number, gas flow rate, liquid flow rate, swirl, and nozzle geometry. Measurements were made with a phase Doppler velocimeter. Major conclusions of the study focused upon droplet size as a function of Weber number, effect of gas flow rate on atomization and spray spread, effect of nozzle geometry on atomization and spread, effect of swirl on atomization, spread, jet recirculation and breakup, and secondary atomization.

  10. Atomic diffusion in stars

    CERN Document Server

    Michaud, Georges; Richer, Jacques

    2015-01-01

    This book gives an overview of atomic diffusion, a fundamental physical process, as applied to all types of stars, from the main sequence to neutron stars. The superficial abundances of stars as well as their evolution can be significantly affected. The authors show where atomic diffusion plays an essential role and how it can be implemented in modelling.  In Part I, the authors describe the tools that are required to include atomic diffusion in models of stellar interiors and atmospheres. An important role is played by the gradient of partial radiative pressure, or radiative acceleration, which is usually neglected in stellar evolution. In Part II, the authors systematically review the contribution of atomic diffusion to each evolutionary step. The dominant effects of atomic diffusion are accompanied by more subtle effects on a large number of structural properties throughout evolution. One of the goals of this book is to provide the means for the astrophysicist or graduate student to evaluate the importanc...

  11. Application of atomic Hirshfeld surface analysis to intermetallic systems: is Mn in cubic CeMnNi4 a thermoelectric rattler atom?

    Science.gov (United States)

    Jørgensen, Mads R V; Skovsen, Iben; Clausen, Henrik F; Mi, Jian-Li; Christensen, Mogens; Nishibori, Eiji; Spackman, Mark A; Iversen, Bo B

    2012-02-06

    The Mn atom in the cubic polymorph of CeMnNi(4) appears to be located in an oversized cage-like structure, and anomalously large atomic displacement parameters (ADPs) for the Mn atom indicate that it is a potential "rattler" atom. Here, multitemperature synchrotron powder X-ray diffraction data measured between 110 and 900 K are used to estimate ADPs for the Mn "guest" atom and the "host" structure atoms in cubic CeMnNi(4). The ADPs are subsequently fitted with Debye and Einstein models, giving Θ(D) = 301(2) K for the "host" structure and Θ(E) = 165(2) K for the Mn atom. This is higher than typical Einstein temperatures for rattlers in thermoelectric skutterudites and clathrates (Θ(E) = 50-80 K), indicating that the Mn atom in cubic CeMnNi(4) is more strongly bonded. In order to probe the chemical interactions of the potential Mn rattler atom, atomic Hirshfeld surface (AHS) analysis is carried out and compared with AHS analysis of well-established guest atom rattlers in archetypical skutterudites, MCoSb(3). Surprisingly, the skutterudite rattlers have more deformed AHSs than the Mn atom in cubic CeMnNi(4). This is related to the highly ionic nature of the skutterudite rattlers, which is not taken into account in the neutral spherical atom approach of the AHS. Additionally, visualization of void spaces in the two materials using the procrystal electron density shows that while the Mn atom is tightly fitting in the CeMnNi(4) structure then the La atom in the skutterudite is truly situated in an oversized cage of the host structure. Overall, we conclude that the Mn atom in cubic CeMnNi(4) cannot be coined a rattler.

  12. Femtosecond electron diffraction: heralding the era of atomically resolved dynamics

    Science.gov (United States)

    Sciaini, Germán; Miller, R. J. Dwayne

    2011-09-01

    One of the great dream experiments in Science is to directly observe atomic motions as they occur. Femtosecond electron diffraction provided the first 'light' of sufficient intensity to achieve this goal by attaining atomic resolution to structural changes on the relevant timescales. This review covers the technical progress that made this new level of acuity possible and gives a survey of the new insights gained from an atomic level perspective of structural dynamics. Atomic level views of the simplest possible structural transition, melting, are discussed for a number of systems in which both thermal and purely electronically driven atomic displacements can be correlated with the degree of directional bonding. Optical manipulation of charge distributions and effects on interatomic forces/bonding can be directly observed through the ensuing atomic motions. New phenomena involving strongly correlated electron-lattice systems are also discussed in which optically induced changes in the potential energy landscape lead to ballistic structural changes. Concepts such as the structural order parameters are now directly observable at the atomic level of inspection to give a remarkable view of the extraordinary degree of cooperativity involved in strongly correlated electron-lattice systems. These recent examples, in combination with time-resolved real space imaging now possible with electron probes, are truly defining an emerging field that holds great promise to make a significant impact in how we understand structural dynamics. This article is dedicated to the memory of Professor David John Hugh Cockayne, a world leader in electron microscopy, who sadly passed away in December.

  13. Weak measurement from the electron displacement current: new path for applications

    Science.gov (United States)

    Marian, D.; Colomés, E.; Zanghì, N.; Oriols, X.

    2015-10-01

    The interest on weak measurements is rapidly growing during the last years as a unique tool to better understand and predict new quantum phenomena. Up to now many theoretical and experimental weak-measurement techniques deal with (relativistic) photons or cold atoms, but there is much less investigation on (non-relativistic) electrons in up-to-date electronics technologies. We propose a way to perform weak measurements in nanoelectronic devices through the measurement of the total current (particle plus displacement component) in such devices. We study the interaction between an electron in the active region of a electron device with a metal surface working as a sensing electrode by means of the (Bohmian) conditional wave function. We perform numerical (Monte Carlo) simulations to reconstruct the Bohmian trajectories in the iconic double slit experiment. This work opens new paths for understanding the quantum properties of an electronic system as well as for exploring new quantum engineering applications in solid state physics.

  14. Damage inhomogeneity in the core region of displacement cascades in simplified nuclear glasses

    Science.gov (United States)

    Delaye, J.-M.; Ghaleb, D.

    2006-02-01

    Displacement cascades at energies ranging from 16 keV to 70 keV were simulated by classical molecular dynamics. Damage inhomogeneity was observed in each case: the atomic density was diminished by the incident projectile to a variable extent depending on the regions concerned. The regions near the initial projectile position are largely annealed, and regions near the end of the cascade are relatively unaffected because of the low residual projectile energy. However, maximum damage occurs in intermediate regions from collisions with incident projectiles at energies ranging from about 10 keV to 25 keV. This phenomenon illustrates the competition between structure annealing and projectile-induced damage: both increase with the local energy, but with different dynamics. At the highest energies, annealing wins out over damage, restoring the glass structure to its pristine state; hence the good structural behaviour in the zones closest to the initial projectile position, which are subjected to the greatest local temperature rise.

  15. Bainite transformation as a displacive decomposition of austenite. Sendan gata hentai to shite toraeta bainite hentai

    Energy Technology Data Exchange (ETDEWEB)

    Omori, Y. (Sumitomo Metal Industries, Ltd., Osaka (Japan))

    1990-07-20

    In the typical textures of hypo-eutictoid steel (hyper-eutictoid steel), there are pro-eutictoid ferrite and pearlite which are generated by the diffusion mechanism and martensite ({alpha}') which is generated by non-diffusion transformation. However, when austenite ({gamma}) is decomposed in the temperature range between about 900K and the Ms point at which martensite transformation starts, bainite is generated. Concerning the bainite generation mechanism, the views are separated into the standpoint of considering that transformation of substitutional atoms progresses in a manner of non-diffusion (the displacive transformation group) and the standpoint that such transformation is basically diffusion transformation only with shorter diffusion distance (the diffusion transformation group). In this article, the concept that the above transformation is displacive transformation is explained. In other words, after stating in detail on bainite transformation behavior, crystals of bainite transformation, and so forth, it discusses on what is bainite. Finally in this article, it is pointed out that the bainite texture has the nature that it cannot be decided simply either the diffusion transformation texture or the non-diffusion transformation texture. 95 refs., 11 figs.

  16. Ultrasmooth gold thin films by self-limiting galvanic displacement on silicon.

    Science.gov (United States)

    Gutés, Albert; Carraro, Carlo; Maboudian, Roya

    2011-05-01

    Galvanic displacement (GD), a type of electroless deposition, has been used to obtain ultrasmooth gold thin films on silicon . The novel aspect of the method presented herein is the absence of fluoride ions in the liquid phase, and its principal advantage when compared to previous efforts is that the process is inherently self-limiting. The self-limiting factor is due to the fact that in the absence of fluorinated species, no silicon oxide is removed during the process. Thus, the maximum gold film thickness is achieved when elemental silicon is no longer available once the surface is oxidized completely during the galvanic displacement process. X-ray photoelectron spectroscopy has been used as a tool for thickness measurement, using the gold to silicon ratio as an analytical signal. Three gold plating solutions with different concentrations of KAuCl₄ (2, 0.2, and 0.02 mM) have been used to obtain information about the formation rate of the gold film. This XPS analysis demonstrates the formation of gold films to a maximum thickness of ∼3.5 Å. Atomic force microscopy is used to confirm surface smoothness, suggesting that the monolayer growth does not follow the Volmer-Weber growth mode, in contrast to the GD process from aqueous conditions with fluorinated species.

  17. Transport-reaction model for defect and carrier behavior within displacement cascades in gallium arsenide

    Energy Technology Data Exchange (ETDEWEB)

    Wampler, William R.; Myers, Samuel Maxwell,

    2014-02-01

    A model is presented for recombination of charge carriers at displacement damage in gallium arsenide, which includes clustering of the defects in atomic displacement cascades produced by neutron or ion irradiation. The carrier recombination model is based on an atomistic description of capture and emission of carriers by the defects with time evolution resulting from the migration and reaction of the defects. The physics and equations on which the model is based are presented, along with details of the numerical methods used for their solution. The model uses a continuum description of diffusion, field-drift and reaction of carriers and defects within a representative spherically symmetric cluster. The initial radial defect profiles within the cluster were chosen through pair-correlation-function analysis of the spatial distribution of defects obtained from the binary-collision code MARLOWE, using recoil energies for fission neutrons. Charging of the defects can produce high electric fields within the cluster which may influence transport and reaction of carriers and defects, and which may enhance carrier recombination through band-to-trap tunneling. Properties of the defects are discussed and values for their parameters are given, many of which were obtained from density functional theory. The model provides a basis for predicting the transient response of III-V heterojunction bipolar transistors to pulsed neutron irradiation.

  18. 78 FR 58571 - Maine Yankee Atomic Power Company, Connecticut Yankee Atomic Power Company, and The Yankee Atomic...

    Science.gov (United States)

    2013-09-24

    ... Atomic Power Company, Connecticut Yankee Atomic Power Company, and The Yankee Atomic Electric Company... Power Company (Maine Yankee), Connecticut Yankee Atomic Power Company (Connecticut Yankee), and the Yankee Atomic Electric Company (Yankee Atomic) (together, ``licensees'' or ``the Yankee Companies'')...

  19. Displacement cascades and defects annealing in tungsten, Part I: Defect database from molecular dynamics simulations

    Energy Technology Data Exchange (ETDEWEB)

    Setyawan, Wahyu [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Nandipati, Giridhar [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roche, Kenneth J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Univ. of Washington, Seattle, WA (United States); Heinisch, Howard L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wirth, Brian D. [Univ. of Tennessee, Knoxville, TN (United States); Oak Ridge National Lab., Oak Ridge, TN (United States); Kurtz, Richard J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-07-01

    Molecular dynamics simulations have been used to generate a comprehensive database of surviving defects due to displacement cascades in bulk tungsten. Twenty-one data points of primary knock-on atom (PKA) energies ranging from 100 eV (sub-threshold energy) to 100 keV (~780×Ed, where Ed = 128 eV is the average displacement threshold energy) have been completed at 300 K, 1025 K and 2050 K. Within this range of PKA energies, two regimes of power-law energy-dependence of the defect production are observed. A distinct power-law exponent characterizes the number of Frenkel pairs produced within each regime. The two regimes intersect at a transition energy which occurs at approximately 250×Ed. The transition energy also marks the onset of the formation of large self-interstitial atom (SIA) clusters (size 14 or more). The observed defect clustering behavior is asymmetric, with SIA clustering increasing with temperature, while the vacancy clustering decreases. This asymmetry increases with temperature such that at 2050 K (~0.5Tm) practically no large vacancy clusters are formed, meanwhile large SIA clusters appear in all simulations. The implication of such asymmetry on the long-term defect survival and damage accumulation is discussed. In addition, <100> {110} SIA loops are observed to form directly in the highest energy cascades, while vacancy <100> loops are observed to form at the lowest temperature and highest PKA energies, although the appearance of both the vacancy and SIA loops with Burgers vector of <100> type is relatively rare.

  20. Linear atomic quantum coupler

    CERN Document Server

    El-Orany, Faisal A A

    2009-01-01

    In this paper, we develop the notion of the linear atomic quantum coupler. This device consists of two modes propagating into two waveguides, each of them includes a localized and/or a trapped atom. These waveguides are placed close enough to allow exchanging energy between them via evanescent waves. Each mode interacts with the atom in the same waveguide in the standard way, i.e. as the Jaynes-Cummings model (JCM), and with the atom-mode in the second waveguide via evanescent wave. We present the Hamiltonian for the system and deduce the exact form for the wavefunction. We investigate the atomic inversions and the second-order correlation function. In contrast to the conventional linear coupler, the atomic quantum coupler is able to generate nonclassical effects. The atomic inversions can exhibit long revival-collapse phenomenon as well as subsidiary revivals based on the competition among the switching mechanisms in the system. Finally, under certain conditions, the system can yield the results of the two-m...

  1. Atomic Structure Theory Lectures on Atomic Physics

    CERN Document Server

    Johnson, Walter R

    2007-01-01

    Atomic Structure Theory is a textbook for students with a background in quantum mechanics. The text is designed to give hands-on experience with atomic structure calculations. Material covered includes angular momentum methods, the central field Schrödinger and Dirac equations, Hartree-Fock and Dirac-Hartree-Fock equations, multiplet structure, hyperfine structure, the isotope shift, dipole and multipole transitions, basic many-body perturbation theory, configuration interaction, and correlation corrections to matrix elements. Numerical methods for solving the Schrödinger and Dirac eigenvalue problems and the (Dirac)-Hartree-Fock equations are given as well. B-spline basis sets are used to carry out sums arising in higher-order many-body calculations. Illustrative problems are provided, together with solutions. FORTRAN programs implementing the numerical methods in the text are included.

  2. Contribution of recoil atoms to irradiation damage in absorber materials

    Science.gov (United States)

    Simeone, D.; Hablot, O.; Micalet, V.; Bellon, P.; Serruys, Y.

    1997-08-01

    Absorbing materials are used to control the reactivity of nuclear reactors by taking advantage of nuclear reactions (e.g., 10B(n,α) 7Li) where neutrons are absorbed. During such reactions, energetic recoils are produced. As a result, radiation damage in absorbing materials originates both from these nuclear reactions and from elastic collisions between neutrons and atoms. This damage eventually leads to a partial destruction of the materials, and this is the main limitation on their lifetime in nuclear reactors. Using a formalism developed to calculate displacements per atoms (dpa) in a multi atomic target, we have calculated damages in terms of displacements per atom in a (n,α) absorbing material taking into account geometrical effects of 10 boron self shielding and transmutation reactions induced by neutrons inside the absorber. Radiation damage is calculated for boron carbide and hafnium diboride ceramics in a Pressurized Water Reactor environment. It is shown that recoils produced by nuclear reactions account for the main part of the radiation damage created in these ceramics. Damages are calculated as a function of the distance from the center of an absorber pellet. Due to the self-shielding effect, these damage curves exhibit sharp maxima, the position of which changes in time.

  3. Characteristics of children with hip displacement in cerebral palsy

    Directory of Open Access Journals (Sweden)

    Wagner Philippe

    2007-10-01

    Full Text Available Abstract Background Hip dislocation in children with cerebral palsy (CP is a common and severe problem. The dislocation can be avoided, by screening and preventive treatment of children with hips at risk. The aim of this study was to analyse the characteristics of children with CP who develop hip displacement, in order to optimise a hip surveillance programme. Methods In a total population of children with CP a standardised clinical and radiological follow-up of the hips was carried out as a part of a hip prevention programme. The present study is based on 212 children followed until 9–16 years of age. Results Of the 212 children, 38 (18% developed displacement with Migration Percentage (MP >40% and further 19 (9% MP between 33 and 39%. Mean age at first registration of hip displacement was 4 years, but some hips showed MP > 40% already at two years of age. The passive range of hip motion at the time of first registration of hip displacement did not differ significantly from the findings in hips without displacement. The risk of hip displacement varied according to CP-subtype, from 0% in children with pure ataxia to 79% in children with spastic tetraplegia. The risk of displacement (MP > 40% was directly related to the level of gross motor function, classified according to the gross motor function classification system, GMFCS, from 0% in children in GMFCS level I to 64% in GMFCS level V. Conclusion Hip displacement in CP often occurs already at 2–3 years of age. Range of motion is a poor indicator of hips at risk. Thus early identification and early radiographic examination of children at risk is of great importance. The risk of hip displacement varies according to both CP-subtype and GMFCS. It is sometimes not possible to determine subtype before 4 years of age, and at present several definitions and classification systems are used. GMFCS is valid and reliable from 2 years of age, and it is internationally accepted. We recommend a hip

  4. Atomic and molecular supernovae

    Energy Technology Data Exchange (ETDEWEB)

    Liu, W.

    1997-12-01

    Atomic and molecular physics of supernovae is discussed with an emphasis on the importance of detailed treatments of the critical atomic and molecular processes with the best available atomic and molecular data. The observations of molecules in SN 1987A are interpreted through a combination of spectral and chemical modelings, leading to strong constraints on the mixing and nucleosynthesis of the supernova. The non-equilibrium chemistry is used to argue that carbon dust can form in the oxygen-rich clumps where the efficient molecular cooling makes the nucleation of dust grains possible. For Type Ia supernovae, the analyses of their nebular spectra lead to strong constraints on the supernova explosion models.

  5. Atomic entanglement and decoherence

    Science.gov (United States)

    Genes, Claudiu

    The generation of entanglement in atomic systems plays a central topic in the fields of quantum information storage and processing. Moreover, a special category of entangled states of multi-atom ensembles, spin squeezed states, have been proven to lead to considerable improvement in the sensitivity of precision measurements compared to systems involving uncorrelated atoms. A treatment of entanglement in open systems is, however, incomplete without a precise description of the process of decoherence which necessarily accompanies it. The theory of entanglement and decoherence are the two main topics of this thesis. Methods are described for the generation of strong correlations in large atomic ensembles using either cavity quantum electrodynamics or measurement outcome conditioned quantum dynamics. Moreover, the description of loss of entanglement resulting from the coupling to a noise reservoir (electromagnetic vacuum) is explored. A spin squeezing parameter is used throughout this thesis as both a measure of entanglement strength and as an indication of the sensitivity improvement above the so-called standard quantum limit (sensitivity obtained with uncorrelated particles) in metrology. The first scheme considered consists of a single mode cavity field interacting with a collection of atoms for which spin squeezing is produced in both resonant and off-resonant regimes. In the resonant case, transfer of squeezing from a field state to the atoms is analyzed, while in the off-resonant regime squeezing is produced via an effective nonlinear interaction (one-axis twisting Hamiltonian). A second, more experimentally realistic case, is one involving the interaction of free space atoms with laser pulses; a projective measurement of a source field originating from atomic fluctuations provides a means of preparing atomic collective states such as spin squeezed and Schrodinger cat states. A new "unravelling" is proposed, that employs the detection of photon number in a single

  6. Atom probe tomography today

    Directory of Open Access Journals (Sweden)

    Alfred Cerezo

    2007-12-01

    Full Text Available This review aims to describe and illustrate the advances in the application of atom probe tomography that have been made possible by recent developments, particularly in specimen preparation techniques (using dual-beam focused-ion beam instruments but also of the more routine use of laser pulsing. The combination of these two developments now permits atomic-scale investigation of site-specific regions within engineering alloys (e.g. at grain boundaries and in the vicinity of cracks and also the atomic-level characterization of interfaces in multilayers, oxide films, and semiconductor materials and devices.

  7. Physics of the atom

    CERN Document Server

    Wehr, Russell M; Adair, Thomas W

    1984-01-01

    The fourth edition of Physics of the Atom is designed to meet the modern need for a better understanding of the atomic age. It is an introduction suitable for students with a background in university physics and mathematical competence at the level of calculus. This book is designed to be an extension of the introductory university physics course into the realm of atomic physics. It should give students a proficiency in this field comparable to their proficiency in mechanics, heat, sound, light, and electricity.

  8. Atom trap trace analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Z.-T.; Bailey, K.; Chen, C.-Y.; Du, X.; Li, Y.-M.; O' Connor, T. P.; Young, L.

    2000-05-25

    A new method of ultrasensitive trace-isotope analysis has been developed based upon the technique of laser manipulation of neutral atoms. It has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. The atom counts are free of contamination from other isotopes, elements,or molecules. The method is applicable to other trace-isotopes that can be efficiently captured with a magneto-optical trap, and has a broad range of potential applications.

  9. Single-atom nanoelectronics

    CERN Document Server

    Prati, Enrico

    2013-01-01

    Single-Atom Nanoelectronics covers the fabrication of single-atom devices and related technology, as well as the relevant electronic equipment and the intriguing new phenomena related to single-atom and single-electron effects in quantum devices. It also covers the alternative approaches related to both silicon- and carbon-based technologies, also from the point of view of large-scale industrial production. The publication provides a comprehensive picture of the state of the art at the cutting edge and constitutes a milestone in the emerging field of beyond-CMOS technology. Although there are

  10. EINSTEIN, SCHROEDINGER, AND ATOM

    Directory of Open Access Journals (Sweden)

    Trunev A. P.

    2014-03-01

    Full Text Available In this paper, we consider gravitation theory in multidimensional space. The model of the metric satisfying the basic requirements of quantum theory is proposed. It is shown that gravitational waves are described by the Liouville equation and the Schrodinger equation as well. The solutions of the Einstein equations describing the stationary states of arbitrary quantum and classical systems with central symmetry have been obtained. Einstein’s atom model has been developed, and proved that atoms and atomic nuclei can be represented as standing gravitational waves

  11. Rydberg atoms in astrophysics

    CERN Document Server

    Gnedin, Yu N; Ignjatovic, Lj M; Sakan, N M; Sreckovic, V A; Zakharov, M Yu; Bezuglov, N N; Klycharev, A N; 10.1016/j.newar.2009.07.003

    2012-01-01

    Elementary processes in astrophysical phenomena traditionally attract researchers attention. At first this can be attributed to a group of hemi-ionization processes in Rydberg atom collisions with ground state parent atoms. This processes might be studied as a prototype of the elementary process of the radiation energy transformation into electrical one. The studies of nonlinear mechanics have shown that so called regime of dynamic chaos should be considered as typical, rather than exceptional situation in Rydberg atoms collision. From comparison of theory with experimental results it follows that a such kind of stochastic dynamic processes, occurred during the single collision, may be observed.

  12. Inside the Hydrogen Atom

    CERN Document Server

    Nowakowski, M; Fierro, D Bedoya; Manjarres, A D Bermudez

    2016-01-01

    We apply the non-linear Euler-Heisenberg theory to calculate the electric field inside the hydrogen atom. We will demonstrate that the electric field calculated in the Euler-Heisenberg theory can be much smaller than the corresponding field emerging from the Maxwellian theory. In the hydrogen atom this happens only at very small distances. This effect reduces the large electric field inside the hydrogen atom calculated from the electromagnetic form-factors via the Maxwell equations. The energy content of the field is below the pair production threshold.

  13. Rotation and Displacement Predict Adverse Events in Pediatric Supracondylar Fractures.

    Science.gov (United States)

    Flierl, Michael A; Carry, Patrick M; Scott, Frank; Georgopoulos, Gaia; Hadley-Miller, Nancy

    2015-08-01

    The goal of this study was to identify supracondylar fracture patterns that were predictive of adverse events and poor outcomes. The study consisted of a retrospective review of patients admitted for surgical treatment of a supracondylar humerus fracture between June 2008 and August 2010. Preoperative radiographs were assessed based on appearance (simple vs oblique vs comminuted), coronal plane displacement (angulated, posterior, posteromedial vs posterolateral), and rotation (rotation vs no rotation). Logistic regression models were used to examine the relationship between fracture pattern and clinical outcome parameters in 373 patients who were followed for 4 weeks or more postoperatively. Outcome parameters included postoperative complications (infection, delayed healing, pin migration, revision surgery), need for physical or occupational therapy, need for postoperative intravenous narcotics, and preoperative nerve injury. Rotation and coronal displacement patterns of the fracture segments were significantly associated with postoperative complications, postoperative need for physical or occupational therapy as a result of residual stiffness, and nerve injury (P<.05). Compared with posteriorly displaced fractures, posterolaterally displaced fractures were associated with significantly greater odds of complications (P=.045), need for physical or occupational therapy (P<.001), and nerve injury (P<.001). Additionally, fractures with rotation were associated with significantly greater odds of complications (P<.001), need for physical or occupational therapy (P<.001), and nerve injury (P<.001) compared with fractures without rotation. Rotation and coronal plane displacement were predictive of complications, need for physical or occupational therapy, and nerve injury, and thus should be considered as potential prognostic variables when evaluating the initial injury pattern.

  14. Overhead Transmission Lines Deicing under Different Incentive Displacement

    Directory of Open Access Journals (Sweden)

    Qing He

    2014-01-01

    Full Text Available Overhead transmission line icing is one of the main factors affecting safety and reliability of power grid. This paper proposed an excitation deicing method of iced wire and theoretically revealed the ice removal mechanism under displacement excitation conditions, by taking the LGJ-70/10 glaze icing wire as the 3D model and analyzing and studying its dynamic response under the effect of displacement excitation. The simulation results show that the stress of wire icing area is enlarged with the increase of excitation displacement and frequency. Through the comparison of the compression strength experimental results on a series of different iced wires in low temperature environment, the authors found out that the stress generated from the wire icing area is greater than the crushing strength of the ice within the scope of the calculation parameters, which proved the validity and the feasibility of the method, and finally the suitable excitation displacement is determined. Following studies show that, as far as possible, it is necessary to reduce the incentive displacement and also to select the appropriate constraint length in order to avoid the line jumping that may be caused by large span ice shedding.

  15. Evaluating the displacement amplification factors of concentrically braced steel frames

    Science.gov (United States)

    Mahmoudi, Mussa; Zaree, Mahdi

    2013-12-01

    According to seismic design codes, nonlinear performance of structures is considered during strong earthquakes. Seismic design provisions estimate the maximum roof and story drifts occurring during major earthquakes by amplifying the drifts computed from elastic analysis at the prescribed seismic force level with a displacement amplification factor. The present study tries to evaluate the displacement amplification factors of conventional concentric braced frames (CBFs) and buckling restrained braced frames (BRBFs). As such, static nonlinear (pushover) analysis and nonlinear dynamic time history analysis have been performed on the model buildings with single and double bracing bays, and different stories and brace configurations (chevron V, invert V, and X bracing). It is observed that the displacement amplification factors for BRBFs are higher than that of CBFs. Also, the number of bracing bays and height of buildings have a profound effect on the displacement amplification factors. The evaluated ratios between displacement amplification factors and response modification factors are from 1 to 1.12 for CBFs and from 1 to 1.4 for BRBFs.

  16. Atom chip gravimeter

    Science.gov (United States)

    Schubert, Christian; Abend, Sven; Gebbe, Martina; Gersemann, Matthias; Ahlers, Holger; Müntinga, Hauke; Matthias, Jonas; Sahelgozin, Maral; Herr, Waldemar; Lämmerzahl, Claus; Ertmer, Wolfgang; Rasel, Ernst

    2016-04-01

    Atom interferometry has developed into a tool for measuring rotations [1], accelerations [2], and testing fundamental physics [3]. Gravimeters based on laser cooled atoms demonstrated residual uncertainties of few microgal [2,4] and were simplified for field applications [5]. Atomic gravimeters rely on the interference of matter waves which are coherently manipulated by laser light fields. The latter can be interpreted as rulers to which the position of the atoms is compared. At three points in time separated by a free evolution, the light fields are pulsed onto the atoms. First, a coherent superposition of two momentum states is produced, then the momentum is inverted, and finally the two trajectories are recombined. Depending on the acceleration the atoms experienced, the number of atoms detected in the output ports will change. Consequently, the acceleration can be determined from the output signal. The laser cooled atoms with microkelvin temperatures used in state-of-the-art gravimeters impose limits on the accuracy [4]. Therefore, ultra-cold atoms generated by Bose-Einstein condensation and delta-kick collimation [6,7] are expected to be the key for further improvements. These sources suffered from a low flux implying an incompatible noise floor, but a competitive performance was demonstrated recently with atom chips [8]. In the compact and robust setup constructed for operation in the drop tower [6] we demonstrated all steps necessary for an atom chip gravimeter with Bose-Einstein condensates in a ground based operation. We will discuss the principle of operation, the current performance, and the perspectives to supersede the state of the art. The authors thank the QUANTUS cooperation for contributions to the drop tower project in the earlier stages. This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Energy (BMWi) due to an enactment of the German Bundestag under grant numbers DLR 50WM

  17. Advances in atomic spectroscopy

    CERN Document Server

    Sneddon, J

    1998-01-01

    This volume continues the series'' cutting-edge reviews on developments in this field. Since its invention in the 1920s, electrostatic precipitation has been extensively used in industrial hygiene to remove dust and particulate matter from gases before entering the atmosphere. This combination of electrostatic precipitation is reported upon in the first chapter. Following this, chapter two reviews recent advances in the area of chemical modification in electrothermal atomization. Chapter three consists of a review which deal with advances and uses of electrothermal atomization atomic absorption spectrometry. Flow injection atomic spectroscopy has developed rapidly in recent years and after a general introduction, various aspects of this technique are looked at in chapter four. Finally, in chapter five the use of various spectrometric techniques for the determination of mercury are described.

  18. Atomic & Molecular Interactions

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-07-12

    The Gordon Research Conference (GRC) on Atomic & Molecular Interactions was held at Roger Williams University, Bristol, RI. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  19. Topics in atomic physics

    CERN Document Server

    Burkhardt, Charles E

    2006-01-01

    The study of atomic physics propelled us into the quantum age in the early twentieth century and carried us into the twenty-first century with a wealth of new and, in some cases, unexplained phenomena. Topics in Atomic Physics provides a foundation for students to begin research in modern atomic physics. It can also serve as a reference because it contains material that is not easily located in other sources. A distinguishing feature is the thorough exposition of the quantum mechanical hydrogen atom using both the traditional formulation and an alternative treatment not usually found in textbooks. The alternative treatment exploits the preeminent nature of the pure Coulomb potential and places the Lenz vector operator on an equal footing with other operators corresponding to classically conserved quantities. A number of difficult to find proofs and derivations are included as is development of operator formalism that permits facile solution of the Stark effect in hydrogen. Discussion of the classical hydrogen...

  20. Atomical Grothendieck categories

    Directory of Open Access Journals (Sweden)

    C. Năstăsescu

    2003-01-01

    Full Text Available Motivated by the study of Gabriel dimension of a Grothendieck category, we introduce the concept of atomical Grothendieck category, which has only two localizing subcategories, and we give a classification of this type of Grothendieck categories.

  1. Atomic Interferometry Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Vertical cavity surface emitting lasers (VCSELs) is a new technology which can be used for developing high performance laser components for atom-based sensors...

  2. Application of the model of delocalized atoms to metallic glasses

    Science.gov (United States)

    Sanditov, D. S.; Darmaev, M. V.; Sanditov, B. D.

    2017-01-01

    The parameters of the model of delocalized atoms applied to metallic glasses have been calculated using the data on empirical constants of the Vogel-Fulcher-Tammann equation (for the temperature dependence of viscosity). It has been shown that these materials obey the same glass-formation criterion as amorphous organic polymers and inorganic glasses. This fact qualitatively confirms the universality of the main regularities of the liquid-glass transition process for all amorphous materials regardless of their origin. The energy of the delocalization of an atom in metallic glasses, Δɛ e ≈ 20-25 kJ/mol, coincides with the results obtained for oxide inorganic glasses. It is substantially lower than the activation energies for a viscous flow and for ion diffusion. The delocalization of an atom (its displacement from the equilibrium position) for amorphous metallic alloys is a low-energy small-scale process similar to that for other glass-like systems.

  3. Straightening the Density-Displacement Relation with a Logarithmic Transform

    CERN Document Server

    Falck, Bridget L; Aragon-Calvo, Miguel A; Lavaux, Guilhem; Szalay, Alexander S

    2011-01-01

    We investigate the use of a logarithmic density variable in estimating the Lagrangian displacement field, motivated by the success of a logarithmic transformation in restoring information to the matter power spectrum. The logarithmic relation is an extension of the linear relation, motivated by the continuity equation, in which the density field is assumed to be proportional to the divergence of the displacement field; we compare the linear and logarithmic relations by measuring both of these fields directly in a cosmological N-body simulation. The relative success of the logarithmic and linear relations depends on the scale at which the density field is smoothed. Thus we explore several ways of measuring the density field, including Cloud-In-Cell smoothing, adaptive smoothing, and the (scale-independent) Delaunay tessellation, and we use both a Fourier space and a geometrical tessellation approach to measuring the divergence. We find that the relation between the divergence of the displacement field and the ...

  4. Geometric interpretation of density displacements and charge sensitivities

    Indian Academy of Sciences (India)

    Roman F Nalewajski

    2005-09-01

    The ``geometric” interpretation of the electronic density displacements in the Hilbert space is given and the associated projection-operator partitioning of the hardness and softness operators (kernels) is developed. The eigenvectors |á 〉 = \\{| 〉 \\} of the hardness operator define the complete (identity) projector $\\hat{P}$ = | 〉 〈 = 1 for general density displacements, including the charge-transfer (CT) component, while the eigenvectors | i 〉 = { | 〉} of the linear response operator determine the polarizational -projector, $\\hat{P}$ = | 〉 〈 |. Their difference thus defines the complementary CT-projector: $\\hat{P}$ = 1 - $\\hat{P}$. The complete vector space for density displacements can be also spanned by supplementing the -modes with the homogeneous CT-mode. These subspaces separate the integral (normalization) and local aspects of density shifts in molecular systems.

  5. System design of welding dynamic displacement measurement using laser ESPI

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Based on the advantages of electronic speckle pattern interferometry(ESPI), such as non-contact, high precision, strong parasitic light resistance, and full-field measurement, a system for measuring welding dynamic displacement fields using ESPI was designed. The system consists of a 70mW He-Ne laser source, an optical path system, a computer-assisted frame grabber and a processing system. By measuring dynamic displacement fields on one LY2 aluminum alloy plate during an argon arc point welding, it can be proved that using ESPI to measure welding dynamic displacement fields is fully feasible, and this method can offer a solid experimental base for the structure mechanics.

  6. Research on the displacement control method of asynchronous modular contactor

    Science.gov (United States)

    He, Gong; Ming, Zong

    2017-01-01

    Ac contactor is a kind of low voltage electrical appliances with large usage and wide application. Because of the frequent operation, contactor life must be long enough to ensure the reliable operation of power system. The electrical life of the contactor, as the key to affect the service life of the contactor, is mainly affected by the arc developed in the breaking and closing course. This paper concentrates on a new type of asynchronous modular contactor. To get the contactor movement characteristics, the dynamic model of the electromagnetic system is established by MATLAB/SIMULINK. Then, according to the displacement curve of contactor, the breaking process and closing process is planned. The thought of closed loop control, by adjusting the parameters of PID controller, enables the contactor to operate as the planning displacement curve. In addition, to achieve no arc or micro arc breaking and no bounce or micro bounce closing , a displacement closed loop control system for contactor is designed.

  7. Laser diode feedback interferometer for measurement of displacements without ambiguity

    Energy Technology Data Exchange (ETDEWEB)

    Donati, S.; Giuliani, G.; Merlo, S. [Univ. di Pavia (Italy). Dipt. di Elettronica

    1995-01-01

    The authors report what, to their knowledge, is the first example of laser feedback interferometer capable of measuring displacements of arbitrary form using a single interferometric channel. With a GaAlAs laser diode they can measure 1.2-m displacements, with interferometric resolution, simply by means of the backreflection from the surface (reflective or diffusive) under test. The operation is performed at moderate (i.e., not very weak) levels of feedback, such that a two-level hysteresis is found in the amplitude modulated signal. This is shown to allow the recovery of displacement without sign ambiguity from a single interferometric signal. Experimental results are reported, which are found to be in good agreement with the underlying theory. Performances of the developed feedback interferometer are finally presented.

  8. Optical displacement measurement using a monolithic Michelson interferometer

    Science.gov (United States)

    Hofstetter, Daniel; Zappe, Hans P.

    1997-04-01

    Contactless optical displacement measurement has the potential for a variety of industrial and scientific applications. For highly accurate displacement measurements at distances below 1 m, interferometric methods are preferred over most other methods. This is mainly because of the good resolution and the possibility of doing the measurements in real-time. Furthermore, the use of direct bandgap semiconductor materials also enables the fabrication of a compact interferometer-based device which unites all necessary components, including the light emitter, on a single chip. In this paper, a monolithically integrated optical displacement sensor fabricated in the GaAs/AlGaAs material system is reported. This single chip microsystem is configured as a double Michelson interferometer and comprises a distributed Bragg reflector laser, photodetectors, phase shifters and waveguide couplers. In the course of this paper, we will also briefly discuss possible scientific and industrial applications of such devices.

  9. Development of multichannel array transducer of displacement mechanical-myogram.

    Science.gov (United States)

    Oka, H; Konishi, Y; Kitawaki, T; Ichihashi, N; Yoshida, M

    2013-01-01

    The myoelectric signal (EMG) recorded on the skin surface is a time-related and spatial aggregate of the action potentials of motor units of skeletal muscle, and it indicates the input information for muscle contraction. The mechano-myographic signal (MMG) is a vibration of skin/muscle surface caused by muscle contraction and it directly reflects the activity of muscle contraction. The two-dimensional generation mechanism of MMG is still n ot clarified in detail. In this study, the displacement MMGs were recorded at 25 measuring points using 5 × 5 displacement MMG array transducer within 50× 50 mm, while the motor point of the biceps brachii was electro-stimulated. The spatial propagation map of twitch waveform of displacement MMG was drawn.

  10. Polydimethylsiloxane fibers for optical fiber sensor of displacement

    Science.gov (United States)

    Martincek, Ivan; Pudis, Dusan; Gaso, Peter

    2013-09-01

    The paper describes the preparation of polydimethylsiloxane (PDMS) fiber integrated on the conventional optical fibers and their use for optical fiber displacement sensor. PDMS fiber was made of silicone elastomer Sylgard 184 (Dow Corning) by drawing from partially cured silicone. Optical fiber displacement sensor using PDMS fiber is based on the measurement of the local minimum of optical signal in visible spectral range generated by intermodal interference of circularly symmetric modes. Position of the local minimum in spectral range varies by stretching the PDMS fiber of 230 μm in the wavelength range from 688 to 477 nm. In the stretched PDMS fiber is possible to determine the longitudinal displacement with an accuracy of approximately 1 micrometer.

  11. High-resolution displacement sensor using squid array amplifier

    Science.gov (United States)

    Chui, T.; Penanen, K.; Barmatz, M.; Paik, H.

    Improvement in the measurement of displacement has profound implications for gravitational physics. Examples of high-impact projects that can benefit from a better displacement sensor are: detection of gravitational waves, test of the equivalence principle, search for the postulated ?axion? particle, and test of the inverse square law of gravity. We describe the concept of a new displacement sensor that makes use of a recent development in the Superconducting Quantum Interference Device (SQUID) technology. The SQUID array amplifier, invented by Welty and Martinis (IEEE Trans. Appl. Superconductivity 3, 2605, 1993), has about the same noise as a conventional SQUID; however, it can work at a much higher frequency of up to 5 MHz. We explain how the higher bandwidth can be translated into higher resolution using a bridge-balancing scheme that can simultaneously balance out both the carrier signal at the bridge output and the electrostatic force acting on the test mass.

  12. General Displaced SU (1,1) number states-revisited

    CERN Document Server

    Dehghani, A

    2014-01-01

    The most general displaced number states, based on the bosonic and an irreducible representation(IREP) of the Lie algebra symmetry of su(1, 1) and associated to the Calogero-Sutherland model are introduced. Here, we utilize the Barut-Girardello displacement operator instead of the Klauder- Perelomov counterpart, to construct new kind of the displaced number states which can be classified in nonlinear coherent states regime, too, with special nonlinearity functions. They depend on two parameters, and can be converted into the well known Barut-Girardello coherent and number states respectively, depending on which of the parameters equal to zero. A discussion of the statistical properties of these states is included. Significant are their squeezing properties and anti bunching effects which can be raised by increasing the energy quantum number. Depending on the particular choice of the parameters of the above scenario, we are able to determine the status of compliance with flexible statistics. Major parts of the...

  13. Displacement and air distribution ventilation systems; Verdringingsventilatie- en luchtverdeelsystemen

    Energy Technology Data Exchange (ETDEWEB)

    Van Holten, P. [Solid Air, Amsterdam (Netherlands)

    2009-06-15

    Since an evaporative cooling system uses 100% clean outdoor air; it is ideal for positive displacement ventilation. By using the overpressure inside the building or room, windows and doors can be opened without affecting the controlled room temperature. The combination of positive displacement ventilation/balance ventilation with heat recovery is a very attractive solution. In this article you will find a brief explanation of the operation, application and basic principles of positive displacement ventilation. [Dutch] Verdampingskoeling leent zich in het bijzonder voor verdringingsventilatie dankzij het gebruik van 100% buitenlucht. Gebruikmakend van overdruk kunnen daarbij ramen en deuren worden geopend zonder dat de temperatuur hierdoor sterk wordt beinvloed. De combinatie verdringingsventilatie/balansventilatie met WTW, zoals in De Vijfhoek, is daarbij een voor de hand liggende optie. In dit artikel worden de basisprincipes van verdringingsventilatie, alsmede de werking en toepassing hiervan, toegelicht.

  14. Beamforming Scheme for 2D Displacement Estimation in Ultrasound Imaging

    Directory of Open Access Journals (Sweden)

    Philippe Delachartre

    2005-05-01

    Full Text Available We propose a beamforming scheme for ultrasound imaging leading to the generation of two sets of images, one with oscillations only in the axial direction and one with oscillations only in the lateral direction. Applied to tissue elasticity imaging, this leads to the development of a specific displacement estimation technique that is capable of accurate estimation of two components of the displacement. The mean standard deviation for the axial displacement estimates is 0.0219 times the wavelength of the axial oscillations λz, and for the lateral estimates, it is equal to 0.0164 times the wavelength of the lateral oscillations λx. The method is presented and its feasibility is clearly established by a simulation work.

  15. Wide Range Fiber Displacement Sensor Based on Bending Loss

    Directory of Open Access Journals (Sweden)

    Jinlei Zhao

    2016-01-01

    Full Text Available A wide range fiber optic sensor system for displacement and crack monitoring is developed. In the proposed fiber optic sensor system, a number of fiber loops are formed from a single fiber and each fiber loop is used as a crack or displacement sensor. The feasibility and the dynamic range of the fiber sensor developed in this manner are investigated experimentally. Both glass fibers and plastic fibers are used in the experiments. Experimental results show that the new fiber optic sensor has a wide range (maximum range is 88 mm and this sensor also has a high sensitivity for displacement and crack monitoring when an appropriate diameter of the fiber loop is selected as the sensor. Moreover, the proposed method is very simple and has low cost, so in situ application potential of the proposed sensor is high.

  16. An Optical Fiber Displacement Sensor Using RF Interrogation Technique.

    Science.gov (United States)

    Kim, Hyeon-Ho; Choi, Sang-Jin; Jeon, Keum Soo; Pan, Jae-Kyung

    2016-02-24

    We propose a novel non-contact optical fiber displacement sensor. It uses a radio frequency (RF) interrogation technique which is based on bidirectional modulation of a Mach-Zehnder electro-optical modulator (MZ-EOM). The displacement is measured from the free spectral range (FSR) which is determined by the dip frequencies of the modulated MZ-EOM transfer function. In experiments, the proposed sensor showed a sensitivity of 456 kHz/mm or 1.043 kHz/V in a measurement range of 7 mm. The displacement resolution of the proposed sensor depends on the linewidth and the power of the optical source. Resolution better than 0.05 μm would be achieved if an optical source which has a linewidth narrower than 1.5 nm and a received power larger than -36 dBm is used. Also, the multiplexing characteristic of the proposed sensor was experimentally validated.

  17. Treatment of displaced mandibular condylar fracture with botulinum toxin A.

    Science.gov (United States)

    Akbay, Ercan; Cevik, Cengiz; Damlar, Ibrahim; Altan, Ahmet

    2014-04-01

    The aim of this case report is to discuss the effect on condylar reduction of botulinum toxin A treatment used in a child with displaced fracture at condylar neck of mandible. A 3-years old boy was admitted to our clinic for incomplete fracture of mandibular symphysis and displaced condylar fracture at the left side. An asymmetrical occlusal splint with intermaxillary fixation was used instead of open reduction and internal fixation because of incomplete fracture of symphysis and possible complications of condyle surgery. However, it was observed that condylar angulation persisted despite this procedure. Thus, botulinum toxin A was administered to masseter, temporalis and pterygoideus medialis muscles. At the end of first month, it was seen that mandibular condyle was almost completely recovered and that fusion was achieved. In conclusion, Botulinum A toxin injection aiming the suppression of masticatory muscle strength facilitates the reduction in the conservative management of displaced condyle in pediatric patients.

  18. Early total hip arthroplasty for severe displaced acetabular fractures

    Institute of Scientific and Technical Information of China (English)

    YANG Shu-hua; ZHANG Yu-kun; XU Wei-hua; LI Jin; LIU Guo-hui; YANG Cao; LIU Yong; TIAN Hong-tao

    2006-01-01

    Objective : To investigate the effect of early total hip arthroplasty for severe displaced acetabular fractures.Methods: Total hip arthroplasty was performed on 17 cases of severe fracture of the acetabulum from 1997 to 2003. The mean follow-up was 2.1 years (1-6 years) and the average period from fracture to operation was 8 days (5-21 day). The average age of the patients was 53 years (26-69 years).Results: At the final follow-up the Harris hip score averaged 82(69-100) points and 15 cases have got a good outcome. There was one case of heterotopic bone formation. There were no radiographic evidences of late loosening of the prosthesis. One patient had severe central displacement of the cup.Conclusions: In patients with severe displaced acetabular fractures, particularly in elderly patients, early total hip arthroplasty is probably an alternative efficient way to achieve a painless and stable hip.

  19. Modeling Non-aqueous Phase Liquid Displacement Process

    Institute of Scientific and Technical Information of China (English)

    Yang Zhenqing; Shao Changjin; Zhou Guanggang; Qiu Chao

    2007-01-01

    A pore-network model physically based on pore level multiphase flow was used to study the water-non-aqueous phase liquid (NAPL) displacement process, especially the effects of wettability, water-NAPL interfacial tension, the fraction of NAPL-wet pores, and initial water saturation on the displacement. The computed data show that with the wettability of the mineral surfaces changing from strongly water-wet to NAPL-wet, capillary pressure and the NAPL relative permeability gradually decrease, while water-NAPL interfacial tension has little effect on water relative permeability, but initial water saturation has a strong effect on water and NAPL relative permeabilities. The analytical results may help to understand the micro-structure displacement process of non-aqueous phase liquid and to provide the theoretical basis for controlling NAPL migration.

  20. Optical atomic magnetometer

    Science.gov (United States)

    Budker, Dmitry; Higbie, James; Corsini, Eric P

    2013-11-19

    An optical atomic magnetometers is provided operating on the principles of nonlinear magneto-optical rotation. An atomic vapor is optically pumped using linearly polarized modulated light. The vapor is then probed using a non-modulated linearly polarized light beam. The resulting modulation in polarization angle of the probe light is detected and used in a feedback loop to induce self-oscillation at the resonant frequency.

  1. Cavity enhanced atomic magnetometry

    OpenAIRE

    Herbert Crepaz; Li Yuan Ley; Rainer Dumke

    2015-01-01

    Atom sensing based on Faraday rotation is an indispensable method for precision measurements, universally suitable for both hot and cold atomic systems. Here we demonstrate an all-optical magnetometer where the optical cell for Faraday rotation spectroscopy is augmented with a low finesse cavity. Unlike in previous experiments, where specifically designed multipass cells had been employed, our scheme allows to use conventional, spherical vapour cells. Spherical shaped cells have the advantage...

  2. Atoms, molecules & elements

    CERN Document Server

    Graybill, George

    2007-01-01

    Young scientists will be thrilled to explore the invisible world of atoms, molecules and elements. Our resource provides ready-to-use information and activities for remedial students using simplified language and vocabulary. Students will label each part of the atom, learn what compounds are, and explore the patterns in the periodic table of elements to find calcium (Ca), chlorine (Cl), and helium (He) through hands-on activities.

  3. Analysis of irreversible displacements of Daniel-Johnson dam

    Energy Technology Data Exchange (ETDEWEB)

    Chouinard, L.; Zhao, W. [McGill Univ., Montreal, PQ (Canada); Lariviere, R. [Hydro-Quebec, Montreal, PQ (Canada); Cote, P. [Hydro-Quebec Production, Baie-Comeau, PQ (Canada)

    2006-07-01

    Irreversible displacements in dams are associated with alkali-aggregate reaction, creep, and other damaging effects that compromise the safety of dams. An identification of the nature of irreversible displacements is needed to predict the future behaviour of dams as well as to select appropriate remedial measures. This paper provided details of a principal component analysis (PCA) used to investigate swelling and small irreversible displacements observed at the Daniel-Johnson dam in Quebec. PCA is a multivariate statistical method that performs the analysis of correlations or covariances between several random variables simultaneously. Three datasets were used: (1) reservoir water level; (2) air temperature; and (3) pendulum displacements. Standard linear regression analyses (HST) were performed for each variable in order to eliminate outliers and replace missing values. The multivariate dataset was then used to perform PCA on the entire dataset as well as on subsets from the original data. Displacement data from pendulums were used in the multivariate statistical analysis in which each component was treated as a separate variable. The comparison of irreversible displacements of the dam from HST analysis and principal component analysis (PCA) indicated that results were consistent with the data. The PCA analysis identified dominant patterns of behaviour and detected 2 distinct components of irreversible deformations arising from creep and swelling of concrete. Results of the study showed that the PCA analysis led to a better understanding of the overall behaviour of the dam and of individual arches and buttresses. It was concluded that the PCA analysis method will help to improve dam safety in addition to more accurately predicting the future behaviour of dams. 6 refs., 2 tabs., 9 figs.

  4. Rebuilding Jewish identities in Displaced Persons Camps in Germany

    Directory of Open Access Journals (Sweden)

    Françoise Ouzan

    2007-10-01

    Full Text Available In the summer 1945, Displaced Persons camps in Germany epitomized a place of contrasts and paradoxes. DPs still languished behind barbed wires after the Allied armies had liberated the concentration camps. The military had assumed that practically all of the Displaced Persons would be sent to their countries of origin. In the spring and summer 1945, 65 000 DPs were sent back home every day and almost six million were repatriated in September 1945. Accurate statistics are impossible, yet, acco...

  5. Fiber optic displacement measurement model based on finite reflective surface

    Science.gov (United States)

    Li, Yuhe; Guan, Kaisen; Hu, Zhaohui

    2016-10-01

    We present a fiber optic displacement measurement model based on finite reflective plate. The theoretical model was derived, and simulation analysis of light intensity distribution, reflective plate width, and the distance between fiber probe and reflective plate were conducted in details. The three dimensional received light intensity distribution and the characteristic curve of light intensity were studied as functions of displacement of finite reflective plate. Experiments were carried out to verify the established model. The physical fundamentals and the effect of operating parameters on measuring system performance were revealed in the end.

  6. Forced Displacement From Rental Housing: Prevalence and Neighborhood Consequences.

    Science.gov (United States)

    Desmond, Matthew; Shollenberger, Tracey

    2015-10-01

    Drawing on novel survey data of Milwaukee renters, this study documents the prevalence of involuntary displacement from housing and estimates its consequences for neighborhood selection. More than one in eight Milwaukee renters experienced an eviction or other kind of forced move in the previous two years. Multivariate analyses suggest that renters who experienced a forced move relocate to poorer and higher-crime neighborhoods than those who move under less-demanding circumstances. By providing evidence implying that involuntary displacement is a critical yet overlooked mechanism of neighborhood inequality, this study helps to clarify why some city dwellers live in much worse neighborhoods than their peers.

  7. Optimization of Moving Coil Actuators for Digital Displacement Machines

    DEFF Research Database (Denmark)

    Nørgård, Christian; Bech, Michael Møller; Roemer, Daniel Beck;

    2016-01-01

    This paper focuses on deriving an optimal moving coil actuator design, used as force pro-ducing element in hydraulic on/off valves for Digital Displacement machines. Different moving coil actuator geometry topologies (permanent magnet placement and magnetiza-tion direction) are optimized...... for actuating annular seat valves in a digital displacement machine. The optimization objectives are to the minimize the actuator power, the valve flow losses and the height of the actuator. Evaluation of the objective function involves static finite element simulation and simulation of an entire operation...

  8. A Miniature Large Displacement Linear Nanopositioning Piezoelectric Actuator

    Institute of Scientific and Technical Information of China (English)

    Lu Qiuhong(卢秋红); Yan Guozheng

    2004-01-01

    A miniature linear piezoelectric actuator which moves based on inertia friction theory is described in this paper. The authors discuss its driving principle, dynamic model and experimental results.The piezoelectric actuator includes two piezoelectric elements.Through the sequentially deformations of the two piezo elements, the moving mass slides a miniature displacement. Many strokes will be added to be a large displacement.This type of piezoactuator has advantages in its dimension and motion type,so it can be miniaturized to do micro manipulation or micropositioning in microspace.

  9. Analysis of a plastic optical fiber-based displacement sensor.

    Science.gov (United States)

    Jiménez, Felipe; Arrue, Jon; Aldabaldetreku, Gotzon; Durana, Gaizka; Zubia, Joseba; Ziemann, Olaf; Bunge, Christian-Alexander

    2007-09-01

    An easy-to-manufacture setup for a displacement sensor based on plastic optical fiber (POF) is analyzed, showing computational and experimental results. If the displacement is the consequence of force or pressure applied to the device, this can be used as a force or pressure transducer. Its principle of operation consists of bending a POF section around a flexible cylinder and measuring light attenuation when the whole set is subjected to side pressure. Attenuations are obtained computationally as a function of side deformation for different design parameters. Experimental results with an actually built prototype are also provided.

  10. A displacement measurement system based on optical triangulation method

    Institute of Scientific and Technical Information of China (English)

    FU Xian-bin; LIU Bin; ZHANG Yu-cun

    2011-01-01

    A new displacement measurement system is described in this paper according to the basic principles of traditional laser triangulation method.The range of the traditional measuring method is enlarged by measuring in sections.Three independent CCDs,which are distributed uniformly along the optical axis,are used to achieve subsection measurement.The plane mirror is regarded as a virtual detector.When imaging beam is reflected by the plane mirror,the beam is imaged on the CCD.The designed system is equivalent to add a CCD.The feasibility of the displacement measurement system is verified by the experiment.

  11. Airflow and Temperature Distribution in Rooms with Displacement Ventilation

    DEFF Research Database (Denmark)

    Jacobsen, T. V.

    This thesis deals with air flow and temperature distribution in a room ventilated by the displacement principle. The characteristic features of the ventilation system are treated in the whole room but main emphasis is laid on the analysis of the stratified flow region in front of the inlet device....... After a prefatory description of the background and the fundamentals of displacement ventilation the objectives of the current study are specified. The subsequent sections describe the measurements of velocity and temperature profiles carried out in a full scale test room. Based on experimental data...

  12. Absolute Measurement of Quantum-Limited Interferometric Displacements

    CERN Document Server

    Thiel, Valérian; Treps, Nicolas; Roslund, Jonathan

    2016-01-01

    A methodology is introduced that enables an absolute, quantum-limited measurement of sub-wavelength interferometric displacements. The technique utilizes a high-frequency optical path modulation within an interferometer operated in a homodyne configuration. All of the information necessary to fully characterize the resultant path displacement is contained within the relative strengths of the various harmonics of the phase modulation. The method, which is straightforward and readily implementable, allows a direct measurement of the theoretical Cram\\'er-Rao limit of detection without any assumptions on the nature of the light source.

  13. Structural dependence of threshold displacement energies in rutile, anatase and brookite TiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, M., E-mail: marc.robinson@curtin.edu.au [Nanochemistry Research Institute, Curtin University, GPO Box U1987, Perth, WA 6845 (Australia); Marks, N.A. [Discipline of Physics and Astronomy, Curtin University, Perth, WA 6845 (Australia); Lumpkin, G.R. [Australian Nuclear Science and Technology Organisation, Locked Bag 2001, Kirrawee DC, NSW 2232 (Australia)

    2014-09-15

    Systematic molecular dynamics simulations of low energy cascades have been performed to examine how threshold displacement events are effected by changes in crystal structure. Exploiting the structural proximity of the rutile, anatase and brookite polymorphs of TiO{sub 2}, a quantitative examination of defect production has been carried out including detailed defect analysis and the determination of values of the threshold displacement energy (E{sub d}). Across all polymorphs comparable values of E{sub d} are reported for oxygen at around 20 eV, with the value for Ti in rutile (73 ± 2 eV) significantly higher than that in brookite (34 ± 1 eV) and anatase (39 ± 1 eV). Quantifying defect formation probability as a function of Primary Knock-on Atom (PKA) energy, simulations in rutile indicate a consistent reduction in defect formation at energies higher than E{sub d} relative to anatase and brookite. Defect cluster analysis reveals a significant proportion of di-Frenkel pairs in anatase at Ti PKA energies around E{sub d}. These clusters, which are stabilised by the localisation of two Frenkel pairs, are associated with a recombination barrier of approximately 0.19 eV. As such, annihilation is likely under typical experimental conditions which suggests an expected increase in the measured Ti value of E{sub d}. Identical O defect populations produced at the threshold by the O PKA in both rutile and anatase explain the comparable values of E{sub d}. At higher O PKA energies, the commencement of defect production on both sublattices in anatase is observed in contrast to the confinement of defects to the O sublattice in rutile. The overall trends reported are consistent with in-situ irradiation experiments and thermal spike simulations, suggesting the contrasting radiation response of the polymorphs of TiO{sub 2} is apparent during the initial stages of defect production. - Highlights: • Systematic calculation of threshold displacement energies (E{sub d

  14. Representation of finite cracks by dislocation pileups: An application to atomic simulation of fracture

    Energy Technology Data Exchange (ETDEWEB)

    Shastry, V.; Farkas, D. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Materials Science and Engineering

    1996-12-01

    The elastic displacement field solution of a semi-infinite crack in an anisotropic body, calculated using a complex variable approach due to Sih and Liebowitz, is usually used by atomistic simulations of fracture. The corresponding expression for the displacement field of a finite crack is numerically cumbersome since it involves multiple square roots of complex numbers. In this study, displacement field of the crack is calculated by superposing the displacements of dislocations in an equivalent double pileup, equilibrated under mode 1 conditions. An advantage of this method is its extensibility to atomistic studies of more complex systems containing multiple cracks or interfaces. The pileup representation of the finite crack is demonstrated as being equivalent to its corresponding continuum description using the example of a double ended crack in {alpha}-Fe, loaded in mode 1. In these examples, the interatomic interaction in {alpha}-Fe is described by an empirical embedded atom (EAM) potential.

  15. Representation of finite cracks by dislocation pileups: An application to atomic simulation of fracture

    Energy Technology Data Exchange (ETDEWEB)

    Shastry, V.; Farkas, D. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Materials Science and Engineering

    1996-12-31

    The elastic displacement field solution of a semi-infinite crack in an anisotropic body, calculated using a complex variable approach due to Sih and Liebowitz, is usually used by atomistic simulations of fracture. The corresponding expression for the displacement field of a finite crack is numerically cumbersome since it involves multiple square roots of complex numbers. In this study, displacement field of the crack is calculated by superposing the displacements of dislocations in an equivalent double pileup, equilibrated under mode I conditions. An advantage of this method is its extensibility to atomistic studies of more complex systems containing multiple cracks or interfaces. The pileup representation of the finite crack is demonstrated as being equivalent to its corresponding continuum description using the example of a double ended crack in {alpha}-Fe, loaded in mode I. In these examples, the interatomic interaction in {alpha}-Fe is described by an empirical embedded atom (EAM) potential.

  16. Effective potentials for atom-atom interaction at low temperatures

    OpenAIRE

    Gao, Bo

    2002-01-01

    We discuss the concept and design of effective atom-atom potentials that accurately describe any physical processes involving only states around the threshold. The existence of such potentials gives hope to a quantitative, and systematic, understanding of quantum few-atom and quantum many-atom systems at relatively low temperatures.

  17. 24 CFR 582.335 - Displacement, relocation, and real property acquisition.

    Science.gov (United States)

    2010-04-01

    ... CFR 24.2(g)(2); or (iv) HUD determines that the person was not displaced as a direct result of... for displaced persons. A displaced person (defined in paragraph (f) of this section) must be provided... “displaced person,” or the amount of relocation assistance for which the person is eligible, may file...

  18. 24 CFR 891.510 - Displacement, relocation, and real property acquisition.

    Science.gov (United States)

    2010-04-01

    ....C. 4201-4655), as implemented by 49 CFR part 24. A displaced person shall be advised of his or her... under 49 CFR 24.2(g)(2); or (iv) HUD determines that the person was not displaced as a direct result of... assistance for displaced persons. A displaced person (defined in paragraph (f) of this section) must...

  19. 24 CFR 968.108 - Displacement, relocation, and real property acquisition.

    Science.gov (United States)

    2010-04-01

    ...) of this section. (c) Relocation assistance for displaced persons. A “displaced person” (defined in... “displaced person” shall be advised of his/her rights under the Fair Housing Act (42 U.S.C. 3601-19), and, if... the person qualifies as a “displaced person,” or the amount of the relocation assistance for which...

  20. 24 CFR 570.606 - Displacement, relocation, acquisition, and replacement of housing.

    Science.gov (United States)

    2010-04-01

    ... occupancy. (C) A person who is not displaced as described in 49 CFR 24.2(g)(2). (D) A person who the grantee... assistance for displaced persons at URA levels. (1) A displaced person shall be provided with relocation... Acquisition Policies Act of 1970 (URA) (42 U.S.C. 4601-4655). (2) Displaced person. (i) For purposes...

  1. Teleportation of Atomic States for Atoms in a Lambda Configuration

    CERN Document Server

    Guerra, E S

    2004-01-01

    In this article we discuss a scheme of teleportation of atomic states making use of three-level lambda atoms. The experimental realization proposed makes use of cavity QED involving the interaction of Rydberg atoms with a micromaser cavity prepared in a coherent state. We start presenting a scheme to prepare atomic EPR states involving two-level atoms via the interaction of these atoms with a cavity. In our scheme the cavity and some atoms play the role of auxiliary systems used to achieve the teleportation.

  2. Measurement of Wigner function via atomic beam deflection in Raman- Nath regime

    CERN Document Server

    Khosa, A H; Khosa, Ashfaq Hussain

    2002-01-01

    We propose a method for the reconstruction of photon statistics and hence the Wigner function of a quantized cavity field. The method is based on the measurement of momentum distribution of two level atoms after atom- field interaction in Raman-Nath regime. We reconstruct the photon statistics of the cavity field both the cases of resonant and off- resonant atom field interaction.. For the measurement of Wigner function we propose to displace the photon statistics of the cavity field. We successfully reconstruct the Wigner function of the Schrodinger-cat state in a straightforward manner by employing the proposed method without much mathematical manipulation of the experimental data.

  3. Universal bosonic tetramers of dimer-atom-atom structure

    OpenAIRE

    Deltuva, A.

    2012-01-01

    Unstable four-boson states having an approximate dimer-atom-atom structure are studied using momentum-space integral equations for the four-particle transition operators. For a given Efimov trimer the universal properties of the lowest associated tetramer are determined. The impact of this tetramer on the atom-trimer and dimer-dimer collisions is analyzed. The reliability of the three-body dimer-atom-atom model is studied.

  4. 5 CFR 330.706 - Notification of displaced employees.

    Science.gov (United States)

    2010-01-01

    ... RECRUITMENT, SELECTION, AND PLACEMENT (GENERAL) Interagency Career Transition Assistance Plan for Displaced... the special selection priority available to them under the Interagency Career Transition Assistance Plan. Such information must contain guidance to the employee on how to apply for vacancies under...

  5. Internal displacement in Kenya: the quest for durable solutions

    Directory of Open Access Journals (Sweden)

    Lucy Kiama

    2014-02-01

    Full Text Available Internal displacement in Kenya has been a challenge since the colonial era but only recently has a legal framework been developed to address IDP protection issues. The process of developing this framework offers some useful lessons for stakeholders in similar situations.

  6. Numerical and experimental study of hydrostatic displacement machine

    DEFF Research Database (Denmark)

    Sørensen, Rasmus Mørk; Hansen, Michael; Mouritsen, Ole Ø.

    2012-01-01

    This paper presents a simulation tool to determine the structural deflections and corresponding leakage flow in a hydrostatic displacement motor. The simulation tool is applied to a new motor principle that is categorized as an extreme low-speed high-torque motor with dimensions that calls for at...

  7. Thirty years of development-induced displacement in China

    Directory of Open Access Journals (Sweden)

    François Dubé

    2016-01-01

    Full Text Available To accelerate the process of poverty reduction in its poorer regions, China decided in 2001 to implement a national programme of displacement of populations living in areas considered environmentally fragile. But these programmes were hardly a novelty for China, and the record of previous such attempts has been far from positive.

  8. Potential displacement of petroleum imports by solar energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    DeLeon, P.; Jackson, B.L.; McNown, R.F.; Mahrenholz, G.J.

    1980-05-01

    The United States currently imports close to half of its petroleum requirements. This report delineates the economic, social, and political costs of such a foreign oil dependency. These costs are often intangible, but combined they clearly constitute a greater price for imported petroleum than the strictly economic cost. If we can assume that imported oil imposes significant socioeconomic costs upon the American economy and society, one way to reduce these costs is to develop alternative, domestic energy sources - such as solar energy technologies - which can displace foreign petroleum. The second half of this report estimates that by the year 2000, solar energy technologies can displace 3.6 quads of petroleum. This figure includes solar energy applications in utilities, industrial and agricultural process heat, and transportation. The estimate can be treated as a lower bound; if the United States were to achieve the proposed goal of 20 quads by 2000, the amount of displaced oil probably would be greater. Although all the displaced oil would not be imported, the reduction in imported petroleum would relieve many of the conditions that increase the present cost of foreign oil to the American consumer.

  9. Heeding the warning signs: further displacement predicted for Afghanistan

    Directory of Open Access Journals (Sweden)

    Susanne Schmeidl

    2014-05-01

    Full Text Available There is currently much evidence pointing to another wave of displacement likely to occur in Afghanistan. Ignoring these early warning signs and failing to act may mean paying a higher price in the future, both financially and in human terms.

  10. Lumped impulses, discrete displacements and a moving load analysis

    NARCIS (Netherlands)

    Kok, A.W.M.

    1997-01-01

    Finite element models are usually presented as relations between lumped forces and discrete displacements. Mostly finite element models are found by the elaboration of the method of the virtual work - which is a special case of the Galerkin's variational principle -. By application of Galerkin's var

  11. Examples of oil cavitation erosion in positive displacement pumps

    Science.gov (United States)

    Halat, J. A.; Ellis, G. O.

    1974-01-01

    The effects of cavitation flow on piston type, positive displacement, hydraulic pumps are discussed. The operating principles of the pump and the components which are most subject to erosion effects are described. The mechanisms of cavitation phenomena are identified from photographic records. Curves are developed to show the solubility of air in water, oil-water emulsion, and industrial hydraulic oil.

  12. Preparative displacement electrophoresis (isotachophoresis) of proteins on cellulose columns.

    Science.gov (United States)

    Johansson, G; Ofverstedt, L G; Hjertén, S

    1987-11-01

    This paper describes the separation of proteins by displacement electrophoresis on columns packed with cellulose powder as a stabilizing medium. Cellulose has virtually no molecular sieving properties and thus differs from dextran, polyacrylamide, and agarose in this respect. Therefore, without the risk of unstacking, columns packed with cellulose permit conventional elution of the protein zones and the use of a counter flow (to increase the effective length of the bed). For the same reason, electroosmotic flow is less disturbing. A continuous elution-migration technique adapted to suit the special requirements of displacement electrophoresis gave better separation than was obtainable by conventional elution. Normal human serum and a fresh hemolysate from human erythrocytes were used as samples. An expression for the volume velocity of the boundaries is derived. This parameter can be used to determine the maximum duration of a run and a suitable pump speed when continuous elution or a counter flow is employed. The special advantages of displacement electrophoresis in cellulose beds are discussed as well as general disadvantages of the displacement technique, including the risk that proteins precipitate during a run.

  13. Gass-Assisted Displacement of Non-Newtonian Fluids

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Eriksson, Torbjörn Gerhard

    2003-01-01

    During the resent years several publications (for instance Hyzyak and Koelling, J. Non-Newt. Fluid Mech. 71,73-88 (1997) and Gauri and Koelling, Rheol. Acta, 38, 458-470 (1999)) have concerned gas assisted displacement of viscoelastic fluids (polymer melts and polymeric solutions) contained in a ...

  14. Whose Community Is This? Mathematics of Neighborhood Displacement

    Science.gov (United States)

    Gutstein, Eric

    2013-01-01

    Displacement was part of students' realities--gentrification in North Lawndale (a Chicago community), deportation in Little Village, and foreclosures in both. The author started the unit in his 12th-grade "math for social justice" class by telling the story (with family permission) of Carmen, a student in his class. Her grandmother paid…

  15. The Analytical Approximate Solution of the 2D Thermal Displacement

    Institute of Scientific and Technical Information of China (English)

    Chu-QuanGuan; Zeng-YuanGuo; 等

    1996-01-01

    The 2D plane gas flow under heating (with nonentity boundary condition)has been discussed by the analytical approach in this paper.The approximate analytical solutions have been obtained for the flow passing various kinds of heat sources.Solutions demonstrate the thermal displacement phenomena are strongly depend on the heating intensity.

  16. Driving force and nucleophilicity in SN2 displacements

    OpenAIRE

    Streitwieser, Andrew

    1985-01-01

    The free energies of activation for reaction of six anionic nucleophiles with methyl iodide in dimethylformamide correlate linearly with the overall heats of reaction in the gas phase. The result indicates that nucleophilicity in this SN2 displacement reaction is dominated by electron affinity and bond-strength effects.

  17. Children's Spiritual Development in Forced Displacement: A Human Rights Perspective

    Science.gov (United States)

    Ojalehto, Bethany; Wang, Qi

    2008-01-01

    This article provides a synthesis of current research and theories of spiritual development in forced displacement from a human rights perspective. Spirituality, understood as a cognitive-cultural construct, has shown positive impact on children's development through both collective and individual processes and across ecological domains of the…

  18. Limitations of the MMS-10 tympanic displacement analyser

    NARCIS (Netherlands)

    Rosingh, HJ; Wit, HP

    1998-01-01

    Using the MMS-10 tympanic displacement analyser, the test-retest variation was determined in 20 normal hearing ears (ten subjects) for the measurement parameters Vi and Vm. Variations were found to be on average 60 nl for Vi and 72 nl for Vm. The consequences of these substantial test-retest variabi

  19. Displacement damage effects in silicon MEMS at high proton doses

    Science.gov (United States)

    Gomes, João; Shea, Herbert R.

    2011-02-01

    We report on a study of the sensitivity of silicon MEMS to proton radiation and mitigation strategies. MEMS can degrade due to ionizing radiation (electron-hole pair creation) and non-ionizing radiation (displacement damage), such as electrons, trapped and solar protons, or cosmic rays, typically found in a space environment. Over the past few years there has been several reports on the effects of ionizing radiation in silicon MEMS, with failure generally linked to trapped charge in dielectrics. However there is near complete lack of studies on displacement damage effects in silicon- MEMS: how does silicon change mechanically due to proton irradiation? We report on an investigation on the susceptibility of 50 μm thick SOI-based MEMS resonators to displacement damages due to proton beams, with energies from 1 to 60 MeV, and annealing of this damage. We measure ppm changes on the Young's modulus and Poisson ratio by means of accurately monitoring the resonant frequency of devices in vacuum using a Laser Doppler Vibrometer. We observed for the first time an increase (up to 0.05%) of the Young's modulus of single-crystal silicon electromagnetically-actuated micromirrors after exposure to low energy protons (1-4 MeV) at high absorbed doses ~ 100 Mrad (Si). This investigation will contribute to a better understanding of the susceptibility of silicon-based MEMS to displacement damages frequently encountered in a space radiation environment, and allow appropriated design margin and shielding to be implemented.

  20. Therapeutic outcome assessment in permanent temporomandibular joint disc displacement

    NARCIS (Netherlands)

    Kropmans, TJB; Dijkstra, PU; Stegenga, B; De Bont, LGM

    1999-01-01

    In permanent temporomandibular disc displacement (TMJ-DD) outcome studies many authors claim positive effects of arthroscopic surgery, arthrocentesis and physical therapy. This literature review was undertaken to analyse whether the claimed effects are based on acceptable methodology. The recorded p

  1. Mirror and triplet displacement energies within nuclear DFT: numerical stability

    CERN Document Server

    Baczyk, Pawel; Konieczka, Maciej; Nakatsukasa, Takashi; Sato, Koichi; Satula, Wojciech

    2016-01-01

    Isospin-symmetry-violating class II and III contact terms are introduced into the Skyrme energy density functional to account for charge dependence of the strong nuclear interaction. The two new coupling constants are adjusted to available experimental data on triplet and mirror displacement energies, respectively. We present preliminary results of the fit, focusing on its numerical stability with respect to the basis size.

  2. A displacement sensor of dual-light based on FPGA

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The dual-light displacement sensor is presented to obtain a higher accuracy compared with the single. The structure and principle of the system are also introduced, and the hardware and software are brought in too. The function of the system is feasible through the experiments and simulating the data process based on FPGA.

  3. A Novel Interface for Eddy Current Displacement Sensors

    NARCIS (Netherlands)

    Nabavi, M.R.; Nihtianov, S.

    2009-01-01

    In this paper, we propose a novel interface concept for eddy current displacement sensors. A measurement method and a new front-end circuit are also proposed. The front-end circuit demonstrates excellent thermal stability, high resolution, and low-power consumption. The proposed idea is analytically

  4. Temporal displacement of environmental crime : Evidence from marine oil pollution

    NARCIS (Netherlands)

    Vollaard, Ben

    2017-01-01

    We provide evidence for temporal displacement of illegal discharges of oil from shipping, a major source of ocean pollution, in response to a monitoring technology that features variation in the probability of conviction by time of day. During the nighttime, evidence collected by Coast Guard aircraf

  5. GPR monitoring of oil displacement - A laboratory study

    NARCIS (Netherlands)

    Miorali, M.; Slob, E.C.; Arts, R.J.

    2011-01-01

    In this paper we present laboratory experiments where we address the Ground Penetrating Radar (GPR) capability of monitoring oil displacement processes in porous media. This has significant applications in near-subsurface environments where remediation of contaminant such as oil-derived liquids is c

  6. Temporal Displacement of Environmental Crime : Evidence from Marine Oil Pollution

    NARCIS (Netherlands)

    Vollaard, Ben

    2015-01-01

    The probability of conviction commonly varies across different circumstances due to imperfect monitoring. Evidence of whether and how offenders exploit gaps in monitoring provides insight into the process by which deterrence is produced. We present an empirical test of temporal displacement of illeg

  7. Political Geographies of Displacement by Dispossession in Columbia

    DEFF Research Database (Denmark)

    Velez Torres, Irene

    as a geopolitical scale for analysing features of the socio environmental conflicts that have generated displacement in Colombia. It critically addresses the matrix of actors and interests that interlock in these disputes in their attempt to access and control land based resources, and the ways in which unequal...

  8. Plane Stratified Flow in a Room Ventilated by Displacement Ventilation

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm; Nickel, J.; Baron, D. J. G.

    2004-01-01

    The air movement in the occupied zone of a room ventilated by displacement ventilation exists as a stratified flow along the floor. This flow can be radial or plane according to the number of wall-mounted diffusers and the room geometry. The paper addresses the situations where plane flow...

  9. Effect of displacement on resistance and capacitance of polyaniline film

    Institute of Scientific and Technical Information of China (English)

    Khasan Sanginovich Karimov; Muhammad Tariq Saeed; Fazal Ahmad Khalid; Syed Abdul Moiz

    2011-01-01

    This paper investigates the properties of displacement sensors based on polyaniline(PANI)films. About 1 wt% of PANI micropowder is mixed and stirred in a solution of 90 wt% water and 10 wt% alcohol at room temperature. The films of PANI are deposited from solution by drop-casting on Ag electrodes, which are preliminary deposited on glass substrates. The thicknesses of the PANI films are in the range of 20 jun-80 p.m. A displacement sensor with polyaniline film as an active material is designed and fabricated. The investigations showed that, on average, the AC resistance of the sensor decreases by 2 times and the capacitance accordingly increases by 1.6 times as the displacement changes in the range of 0 mm-0.5 mm. The polyaniline is the only active material of the displacement sensor. The resistance and capacitance of the PANI changes under the pressure of spring and elastic rubber, and this pressure is created by the downward movement of the micrometer.

  10. The contribution of the private sector to solutions for displacement

    Directory of Open Access Journals (Sweden)

    Glaucia Boyer

    2016-05-01

    Full Text Available The Solutions Alliance is exploring ways of better engaging with the private sector – local small and medium-sized enterprises as well as international companies – to harness their capacity to turn displacement challenges into development opportunities.

  11. Calibrating optical bubble size by the displaced-mass method.

    NARCIS (Netherlands)

    Leifer, I.; Leeuw, G. de; Kunz, G.; Cohen, L.H.

    2003-01-01

    Bubble sizing by optical means is very common, but requires calibration by non-optical means. This is particularly important since apparent bubble size increases with decreasing threshold intensity. A calibration experiment was conducted comparing the displaced water mass from captured bubbles with

  12. Environmental stress, displacement and the challenge of rights protection

    Directory of Open Access Journals (Sweden)

    Roger Zetter

    2014-02-01

    Full Text Available "Examination of migration histories and current politics in Kenya, Bangladesh, Vietnam, Ethiopia and Ghana sheds light on how rights are articulated for groups and individuals displaced in a context of environmental stress and climate change. Both migration and rights are sensitive issues in these case-study countries, and the conjunction of the two is especially sensitive."

  13. Single-atom spintronics

    Institute of Scientific and Technical Information of China (English)

    Susan Z. HUA; Matthew R. SULLIVAN; Jason N. ARMSTRONG

    2006-01-01

    Recent work on magnetic quantum point contacts (QPCs) was discussed. Complete magnetoresistance loops across Co QPCs as small as a single atom was measured. The remarkable feature of these QPCs is the rapid oscillatory decay in magnetoresistance with the increase of contact size. In addition,stepwise or quantum magnetoresistance loops are observed,resulting from varying transmission probability of the available discrete conductance channels because the sample is cycled between the ferromagnetic (F) and antiferromagnetic (AF) aligned states. Quantized conductance combined with spin dependent transmission of electron waves gives rise to a multi-channel system with a quantum domain wall acting as a valve,i.e.,a quantum spin-valve. Behavior of a few-atom QPC is built on the behavior of a single-atom QPC and hence the summarization of results as 'single-atom spintronics'. An evolutionary trace of spin-dependent electron transmission from a single atom to bulk is provided,the requisite hallmarks of artefact-free magnetoresistance is established across a QPC - stepwise or quantum magnetoresistance loops and size dependent oscillatory magnetoresistance.

  14. Quantum magnetism through atomic assembly

    NARCIS (Netherlands)

    Spinelli, A.

    2015-01-01

    This thesis presents an experimental study of magnetic structures, composed of only a few atoms. Those structures are first built atom-by-atom and then locally probed, both with a low-temperature STM. The technique that we use to assemble them is vertical atom manipulation, while to study their phy

  15. Sampling the Hydrogen Atom

    Directory of Open Access Journals (Sweden)

    Graves N.

    2013-01-01

    Full Text Available A model is proposed for the hydrogen atom in which the electron is an objectively real particle orbiting at very near to light speed. The model is based on the postulate that certain velocity terms associated with orbiting bodies can be considered as being af- fected by relativity. This leads to a model for the atom in which the stable electron orbits are associated with orbital velocities where Gamma is n /α , leading to the idea that it is Gamma that is quantized and not angular momentum as in the Bohr and other models. The model provides a mechanism which leads to quantization of energy levels within the atom and also provides a simple mechanical explanation for the Fine Struc- ture Constant. The mechanism is closely associated with the Sampling theorem and the related phenomenon of aliasing developed in the mid-20th century by engineers at Bell labs.

  16. Research on Joint Parameter Inversion for an Integrated Underground Displacement 3D Measuring Sensor

    Directory of Open Access Journals (Sweden)

    Nanying Shentu

    2015-04-01

    Full Text Available Underground displacement monitoring is a key means to monitor and evaluate geological disasters and geotechnical projects. There exist few practical instruments able to monitor subsurface horizontal and vertical displacements simultaneously due to monitoring invisibility and complexity. A novel underground displacement 3D measuring sensor had been proposed in our previous studies, and great efforts have been taken in the basic theoretical research of underground displacement sensing and measuring characteristics by virtue of modeling, simulation and experiments. This paper presents an innovative underground displacement joint inversion method by mixing a specific forward modeling approach with an approximate optimization inversion procedure. It can realize a joint inversion of underground horizontal displacement and vertical displacement for the proposed 3D sensor. Comparative studies have been conducted between the measured and inversed parameters of underground horizontal and vertical displacements under a variety of experimental and inverse conditions. The results showed that when experimentally measured horizontal displacements and vertical displacements are both varied within 0 ~ 30 mm, horizontal displacement and vertical displacement inversion discrepancies are generally less than 3 mm and 1 mm, respectively, under three kinds of simulated underground displacement monitoring circumstances. This implies that our proposed underground displacement joint inversion method is robust and efficient to predict the measuring values of underground horizontal and vertical displacements for the proposed sensor.

  17. Self-interstitial configuration in molybdenum studied by modified analytical embedded atom method

    Indian Academy of Sciences (India)

    Jian-Min Zhang; Zhang Fang Wang; Ke-Wei Xu

    2009-05-01

    The stability of various atomic configurations containing a self-interstitial atom (SIA) in a model representing Mo has been investigated using the modified analytical embedded atom method (MAEAM). The lattice relaxations are treated with the molecular dynamics (MD) simulation at absolute zero of temperature. Six relatively stable self-interstitial configurations and formation energies have been described and calculated. The results indicate that the [1 1 1] dumbbell interstitial S111 has the lowest formation energy, and in ascending order, the sequence of the configurations is predicted to be S111, C, S110, T, S001 and O. From relaxed displacement field up to the fifth-NN atoms of six configurations, we know that the relaxed displacements depend not only on separation distances of the NN atoms from the defect centre but also strongly on the direction of the connected line between the NN atoms and the defect centre. The equilibrium distances between two nearest atoms in the core of the S111, C, S110, T, S001 and O configurations are 0.72a, 0.72a, 0.71a, 0.72a, 0.70a and 0.70a, respectively.

  18. Korean atomic bomb victims.

    Science.gov (United States)

    Sasamoto, Yukuo

    2009-01-01

    After colonizing Korea, Japan invaded China, and subsequently initiated the Pacific War against the United States, Britain, and their allies. Towards the end of the war, U.S. warplanes dropped atomic bombs on Hiroshima and Nagasaki, which resulted in a large number of Koreans who lived in Hiroshima and Nagasaki suffering from the effects of the bombs. The objective of this paper is to examine the history of Korea atomic bomb victims who were caught in between the U.S., Japan, the Republic of Korea (South Korea) and the Democratic People's Republic of Korea (North Korea).

  19. Atomic Force Microscope

    Energy Technology Data Exchange (ETDEWEB)

    Day, R.D.; Russell, P.E.

    1988-12-01

    The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

  20. Optically pumped atoms

    CERN Document Server

    Happer, William; Walker, Thad

    2010-01-01

    Covering the most important knowledge on optical pumping of atoms, this ready reference is backed by numerous examples of modelling computation for optical pumped systems. The authors show for the first time that modern scientific computing software makes it practical to analyze the full, multilevel system of optically pumped atoms. To make the discussion less abstract, the authors have illustrated key points with sections of MATLAB codes. To make most effective use of contemporary mathematical software, it is especially useful to analyze optical pumping situations in the Liouville spa

  1. Atoms in Agriculture

    Energy Technology Data Exchange (ETDEWEB)

    Osborne, Thomas S. [University of Tennessee

    1965-01-01

    Agriculture benefits from the applications of research. Radioactive techniques have been used to study soils, plants, microbes, insects, farm animals, and new ways to use and preserve foodstuffs. Radioactive atoms are not used directly by farmers but are used in research directed by the U. S. Department of Agriculture and Atomic Energy Commission, by the agricultural experiment stations of the various states, and by numerous public and private research institutions. From such research come improved materials and methods which are used on the farm.

  2. Lattice Boltzmann simulations of supercritical CO2-water drainage displacement in porous media: CO2 saturation and displacement mechanism.

    Science.gov (United States)

    Yamabe, Hirotatsu; Tsuji, Takeshi; Liang, Yunfeng; Matsuoka, Toshifumi

    2015-01-06

    CO2 geosequestration in deep aquifers requires the displacement of water (wetting phase) from the porous media by supercritical CO2 (nonwetting phase). However, the interfacial instabilities, such as viscous and capillary fingerings, develop during the drainage displacement. Moreover, the burstlike Haines jump often occurs under conditions of low capillary number. To study these interfacial instabilities, we performed lattice Boltzmann simulations of CO2-water drainage displacement in a 3D synthetic granular rock model at a fixed viscosity ratio and at various capillary numbers. The capillary numbers are varied by changing injection pressure, which induces changes in flow velocity. It was observed that the viscous fingering was dominant at high injection pressures, whereas the crossover of viscous and capillary fingerings was observed, accompanied by Haines jumps, at low injection pressures. The Haines jumps flowing forward caused a significant drop of CO2 saturation, whereas Haines jumps flowing backward caused an increase of CO2 saturation (per injection depth). We demonstrated that the pore-scale Haines jumps remarkably influenced the flow path and therefore equilibrium CO2 saturation in crossover domain, which is in turn related to the storage efficiency in the field-scale geosequestration. The results can improve our understandings of the storage efficiency by the effects of pore-scale displacement phenomena.

  3. (Dis)placing trust: the long-term effects of job displacement on generalised trust over the adult lifecourse.

    Science.gov (United States)

    Laurence, James

    2015-03-01

    Increasing rates of job displacement (i.e. involuntary job loss from redundancy, downsizing, restructuring) have been suggested to be a key driver of declining macro-levels of generalised trust. This article undertakes the first test of how job displacement affects individuals' tendencies to (dis)trust over the adult lifecourse, using two-waves of the Great Britain National Child Development Study cohort data, on a sample of n=6840 individuals. Applying both lagged dependent variable logistic regression and two-wave change-score models, experiencing job displacement between the ages of 33 and 50 appears to significantly scar individuals' generalised trust, with depressed trust observable at least nine years after the event occurred. However, this effect is dependent on the value an individual places on work: the greater the attachment to employment the stronger the negative effect of displacement. A range of mediators, such as physical health, mental well-being, and personal efficacy, do not appear to account for the effect.

  4. The Banality of Displacement: Turning a (ColourBlind Eye on the Ethnic Representation of the Internally Displaced in Colombia

    Directory of Open Access Journals (Sweden)

    Ulrich Oslender

    2010-01-01

    Full Text Available Colombia has one of the highest numbers of internally displaced persons, or IDPs, world-wide. Yet, there exists a conundrum. While latest NGO figures put the total number of IDPs since 1985 at 4 million, Colombian government figures show much lower estimates of 1.9 million. In fact, there are significant discrepancies in the ways how IDPs are identified, counted and categorised. Moreover, whereas it is now commonly argued that displacement has affected black populations proportionately higher than mestizo populations, no data exists to sustain such a view. The displaced population has simply not been accounted for in terms of its ethnic composition. In this article, drawing on Hannah Arendt’s work on terror and evil, I propose the notion of the “banality of displacement” to explain such a colour-blind approach in the discourses and representation of displacement in Colombia. I will refer in particular to the case of the Afro-Colombian population, drawing on fieldwork data collected since 1996, when I begun to work with the social movement of black communities in Colombia

  5. Holocene vertical displacement on the central segments of the Wasatch fault zone, Utah

    Science.gov (United States)

    DuRoss, C.B.

    2008-01-01

    Compiled per-event vertical-displacement observations from 17 paleoseismic sites along the six central segments of the Wasatch fault zone (WFZ) highlight possible biases and trends in displacement along the fault. The displacement data are consistent with a model of characteristic-type slip, but anomalous and variable displacements indicate that significant natural variability in displacement occurs. When combined into a composite distribution of displacement, 79% of the data fit within a displacement envelope that shows displacement decreasing in a half-ellipse shape from 1.4-3.5 m near the segment centers to 0.6-2.5 m near the ends. Additionally, displacements normalized by the distance from the segment centers to ends decrease from means of 2.0-3.0 m near the segment centers to 1.3-1.9 m near the ends, consistent with characteristic-type slip termination. Although several paleoseismic sites exhibit repeated, similar displacements, the data are sparse and both low-valued (0.5-0.8 m) and high-valued (4.2-4.7 m) outliers suggest complex strain release, possibly resulting from segment interaction and/or noncharacteristic events. Although a global, normal-fault-type surface-rupture-length (SRL) average-displacement regression underpredicts observed WFZ displacements, the largest displacements per segment correspond well with a SRL maximum-displacement regression. This correlation, as well as moderate variability in SRL- and displacement-based moment magnitude, suggests that the anomalous displacements represent the intrinsic variability in characteristic displacement per segment. Thus, minor variations to the characteristic slip model to account for exceptional upper- and lower-bound displacements, e.g., a hybrid characteristic-variable slip model, may be appropriate for the WFZ. Additional paleoseismic data are necessary to address data gaps and biases, to facilitate more robust tests of earthquake-slip models, and to reduce uncertainty in SRL, displacement, and

  6. Understanding atomic disorder in polar and magnetic oxides

    Science.gov (United States)

    Shoemaker, Daniel P.

    The functional properties of materials rely upon the composition, coordination, and connectivity of their constituent atoms. Understanding the atomic structure of condensed materials permits an understanding of how that structure influences macroscopic properties. The field of crystallography seeks to define the repeating lattice of periodic materials using a unit cell model with the minimum number of specified atomic positions. For magnetic and electronic materials, the arrangement of atoms and dipoles are often both ordered over long ranges and amenable to a traditional crystallographic description. However, interesting phenomena emerge when materials experience disorder due to chemical substitution, phase competition, nanostructuring, interfaces, or valence disproportionation. In those cases, the long-range symmetry of the material is interrupted and traditional crystallographic methods struggle to incorporate disorder into the unit cell model. I will discuss how disorder can be identified and quantified in functional materials. Each study includes examination of the real-space pair distribution function (PDF), which provides a weighted histogram of all atom-atom distances in a sample. Models are created by simultaneous fits to the Bragg profile and the PDF, thereby constraining the atomic positions by reciprocal- and real-space scattering descriptions. The reverse Monte Carlo method drives stochastic fits to scattering data using tens of thousands of atoms. Once simulation is complete, crystallographic metrics can be extracted from the supercell in real space. This approach is discussed in the case of site mixing and valence disproportionation in the Jahn-Teller active spinel CuMn2O4, local Jahn-Teller distortions of CuO4 tetrahedra in the solid solution Mg 1-xCuxCr 2O4, nanoscale phase co-existence at the metal-insulator transition in VO2, and static displacements and lone-pair activity in the pyrochlores Bi2Ti2O6O' and Bi 2Ru2O6O'.

  7. Predicting Modes and Displacements of Seismic Rock Slope Failures

    Science.gov (United States)

    Gibson, M. D.; Wartman, J.; Keefer, D. K.; Maclaughlin, M.; Arnold, L.; Applegate, K. N.; Smith, S.; Adams, S.

    2013-12-01

    Seismically induced rock slope failures have resulted in billions of dollars of economic damage and enormous loss of life throughout the world. Accurate prediction of the triggering and run out of these failures is elusive for a variety of reasons, including knowledge of the physical modes of failure. Our research explores the potential failure modes of an idealized rigid rock block and expands the modes typically considered to include not only sliding but also toppling (pure forward rotation) and slumping (combined backward rotation and translation). The yield acceleration (or minimum inertial acceleration to cause block movement) for slumping, similar to toppling, is found to be lower than for pure translational sliding. These yield accelerations indicate the initial modes of rock block failure; however, they do not always predict the ultimate failure mode. To predict the final failure modes, the results of discrete element numerical analyses were compared to pseudo static yield acceleration to develop a seismic failure mode decision-making chart based on block geometry and interface friction. With regard to seismic displacement predictions, current simplified models predicting ultimate displacement of a mass under seismic conditions are limited to purely translating, sliding blocks (i.e. Newmark's sliding block method). Our modeling introduces additional simplified analyses to predict ultimate displacement in toppling and slumping modes as well. Important findings from these new methods are that the magnitude of seismically-induced displacement is dependent on the size of the block (or failure mass) and that as the yield acceleration decreases the seismically induced displacements increase. We plan to map these tools into analyses that evaluate rock slope systems with complex geology and geotechnical characteristics. It is envisioned that the decision chart, which predicts the initial and ultimate modes of failure based on block geometry and interface friction

  8. Method of Bonding Optical Elements with Near-Zero Displacement

    Science.gov (United States)

    Robinson, David; McClelland, Ryan; Byron, Glenn; Evans, Tyler

    2012-01-01

    The International X-ray Project seeks to build an x-ray telescope using thousands of pieces of thin and flexible glass mirror segments. Each mirror segment must be bonded into a housing in nearly perfect optical alignment without distortion. Forces greater than 0.001 Newton, or displacements greater than 0.5 m of the glass, cause unacceptable optical distortion. All known epoxies shrink as they cure. Even the epoxies with the least amount of shrinkage (<0.01%) cause unacceptable optical distortion and misalignment by pulling the mirror segments towards the housing as it cures. A related problem is that the shrinkage is not consistent or predictable so that it cannot be accounted for in the setup (i.e., if all of the bonds shrunk an equal amount, there would be no problem). A method has been developed that allows two components to be joined with epoxy in such a way that reduces the displacement caused by epoxy shrinking as it cures to less than 200 nm. The method involves using ultraviolet-cured epoxy with a displacement sensor and a nanoactuator in a control loop. The epoxy is cured by short-duration exposures to UV light. In between each exposure, the nano-actuator zeroes out the displacement caused by epoxy shrinkage and thermal expansion. After a few exposures, the epoxy has cured sufficiently to prevent further displacement of the two components. Bonding of optical elements has been done for many years, but most optics are thick and rigid elements that resist micro-Newton-level forces without causing distortion. When bonding thin glass optics such as the 0.40-mm thick IXO X-ray mirrors, forces in the micro- and milli-Newton levels cause unacceptable optical figure error. This innovation can now repeatedly and reliably bond a thin glass mirror to a metal housing with less than 0.2 m of displacement (<200 nm). This is an enabling technology that allows the installation of virtually stress-free, undistorted thin optics onto structures. This innovation is

  9. Nobel Prize in Physics 1997 "for development of methods to cool and trap atoms with laser light" : Steven Chu, Claude Cohen-Tannoudji and William D. Phillips

    CERN Multimedia

    Audiovideo service

    1998-01-01

    Prof. C. Cohen-Tannoudji presents "manipulating atoms with light" . By using quasi-resonant exchanges of energy, linear and angular momentum between atoms and photons, it is possible to polarize atoms, to displace their energy levels and to control their position and their velocity. A few physical mechanisms allowing one to trap atoms and to cool them in the microKelvin, and even in the nanoKelvin range, will be described. Various possible applications of such ultracold atoms will be also reviewed.

  10. Atomism, Pragmatism, Holism.

    Science.gov (United States)

    Miller, John P.

    1986-01-01

    Examines three world views influencing curriculum development--atomism (underpinning competency-based education), pragmatism (promoting inquiry-based approaches), amd holism (associated with confluent or Waldorf education). Holism embodies the perennial philosophy and attempts to integrate cognitive, affective, and transpersonal dimensions,…

  11. Chiral atomically thin films

    Science.gov (United States)

    Kim, Cheol-Joo; Sánchez-Castillo, A.; Ziegler, Zack; Ogawa, Yui; Noguez, Cecilia; Park, Jiwoong

    2016-06-01

    Chiral materials possess left- and right-handed counterparts linked by mirror symmetry. These materials are useful for advanced applications in polarization optics, stereochemistry and spintronics. In particular, the realization of spatially uniform chiral films with atomic-scale control of their handedness could provide a powerful means for developing nanodevices with novel chiral properties. However, previous approaches based on natural or grown films, or arrays of fabricated building blocks, could not offer a direct means to program intrinsic chiral properties of the film on the atomic scale. Here, we report a chiral stacking approach, where two-dimensional materials are positioned layer-by-layer with precise control of the interlayer rotation (θ) and polarity, resulting in tunable chiral properties of the final stack. Using this method, we produce left- and right-handed bilayer graphene, that is, a two-atom-thick chiral film. The film displays one of the highest intrinsic ellipticity values (6.5 deg μm-1) ever reported, and a remarkably strong circular dichroism (CD) with the peak energy and sign tuned by θ and polarity. We show that these chiral properties originate from the large in-plane magnetic moment associated with the interlayer optical transition. Furthermore, we show that we can program the chiral properties of atomically thin films layer-by-layer by producing three-layer graphene films with structurally controlled CD spectra.

  12. Atomic Particle Detection

    Energy Technology Data Exchange (ETDEWEB)

    Hellman, Hal

    1970-01-01

    This booklet tells how scientists observe the particles and electromagnetic radiation that emerges from an atomic nucleus. The equipment used falls into two general categories: counters which count each particle as it passes by, and track detectors, which make a photographic record of the particle's track.

  13. Atomic and Molecular Processes

    Science.gov (United States)

    1980-06-25

    The topics investigated experimentally and theoretically by the Pittsburgh Atomic Sciences Institute with applications to high power laser development and atmospheric IR backgrounds are enumerated. Reports containing the detailed scientific progress in these studies are cited. Finally, a list of the journal articles describing the results of the programs, with full references, is given.

  14. Energy from the Atom.

    Science.gov (United States)

    Smith, Patricia L.

    This curriculum guide was written to supplement fifth and sixth grade science units on matter and energy. It was designed to provide more in-depth material on the atom. The first part, "Teacher Guide," contains background information, biographical sketches of persons in the history of nuclear energy, vocabulary, answer sheets, management sheets…

  15. Atomically Traceable Nanostructure Fabrication.

    Science.gov (United States)

    Ballard, Josh B; Dick, Don D; McDonnell, Stephen J; Bischof, Maia; Fu, Joseph; Owen, James H G; Owen, William R; Alexander, Justin D; Jaeger, David L; Namboodiri, Pradeep; Fuchs, Ehud; Chabal, Yves J; Wallace, Robert M; Reidy, Richard; Silver, Richard M; Randall, John N; Von Ehr, James

    2015-07-17

    Reducing the scale of etched nanostructures below the 10 nm range eventually will require an atomic scale understanding of the entire fabrication process being used in order to maintain exquisite control over both feature size and feature density. Here, we demonstrate a method for tracking atomically resolved and controlled structures from initial template definition through final nanostructure metrology, opening up a pathway for top-down atomic control over nanofabrication. Hydrogen depassivation lithography is the first step of the nanoscale fabrication process followed by selective atomic layer deposition of up to 2.8 nm of titania to make a nanoscale etch mask. Contrast with the background is shown, indicating different mechanisms for growth on the desired patterns and on the H passivated background. The patterns are then transferred into the bulk using reactive ion etching to form 20 nm tall nanostructures with linewidths down to ~6 nm. To illustrate the limitations of this process, arrays of holes and lines are fabricated. The various nanofabrication process steps are performed at disparate locations, so process integration is discussed. Related issues are discussed including using fiducial marks for finding nanostructures on a macroscopic sample and protecting the chemically reactive patterned Si(100)-H surface against degradation due to atmospheric exposure.

  16. Atomic physics and reality

    CERN Multimedia

    1985-01-01

    An account of the long standing debate between Niels Bohr and Albert Einstein regarding the validity of the quantum mechanical description of atomic phenomena.With physicts, John Wheeler (Texas), John Bell (CERN), David Rohm (London), Abner Shimony (Boston), Alain Aspect (Paris)

  17. Experiments with Ξ- atoms

    Science.gov (United States)

    Batty, C. J.; Friedman, E.; Gal, A.

    1999-01-01

    Experiments with Ξ- atoms are proposed in order to study the nuclear interaction of Ξ hyperons. The production of Ξ- in the (K-,K+) reaction, the Ξ- stopping in matter, and its atomic cascade are incorporated within a realistic evaluation of the results expected for Ξ- x-ray spectra across the periodic table, using an assumed Ξ-nucleus optical potential Vopt. Several optimal targets for measuring the strong-interaction shift and width of the x-ray transition to the ``last'' atomic level observed are singled out: F, Cl, I, and Pb. The sensitivity of these observables to the parameters of Vopt is considered. The relevance of such experiments is discussed in the context of strangeness -2 nuclear physics and multistrange nuclear matter. Finally, with particular reference to searches for the H dibaryon, the properties of Ξ-d atoms are also discussed. The role of Stark mixing and its effect on S and P state capture of Ξ- by the deuteron together with estimates of the resulting probability for producing the H dibaryon are considered in detail.

  18. A distributed optical fiber bi-directional strain-displacement sensor

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A distributed optical fiber strain-displacement sensor is developed, which consists of an optical fiber gauge of strain-displacement and an optical time domain reflectometer (OTDR). The operational principle is the modulation of fiber loss in OTDR, i.e. the strain and displacement in monitoring position are obtained from the bending loss of optical fiber bonded on the optical fiber gauge of strain-displacement. After examining the strain and displacement in the cantilever and the micro displacement rack respectively, the result indicates that the distributed optical fiber gauge of strain-displacement can monitor strains or displacements in different sensitive lengths. The key technique for measuring bi-directional strain-displacement is the pretreatment of bending of the freely suspended optical fibers, which can be identified with OTDR by inserting time delay optical fiber.

  19. Effect of Cu Content on Atomic Positions of Ti50Ni50−xCux Shape Memory Alloys Based on Density Functional Theory Calculations

    Directory of Open Access Journals (Sweden)

    Liangliang Gou

    2015-11-01

    Full Text Available The study of crystal structures in shape memory alloys is of fundamental importance for understanding the shape memory effect. In order to investigate the mechanism of how Cu content affects martensite crystal structures of TiNiCu alloys, the present research examines the atomic displacement of Ti50Ni50−xCux (x = 0, 5, 12.5, 15, 18.75, 20, 25 shape memory alloys using density functional theory (DFT. By the introduction of Cu atoms into TiNi martensite crystal to replace Ni, the displacements of Ti and Ni/Cu atoms along the x-axis are obvious, but they are minimal along the y- and z-axes. It is found that along the x-axis, the two Ti atoms in the unit cell move in opposite directions, and the same occurred with the two Ni/Cu atoms. With increasing Cu content, the distance between the two Ni/Cu atoms increases while the Ti atoms draw closer along the x-axis, leading to a rotation of the (100 plane, which is responsible for the decrease in the monoclinic angle. It is also found that the displacements of both Ti atoms and Ni/Cu atoms along the x-axis are progressive, which results in a gradual change of monoclinic angle and a transition to B19 martensite crystal structure.

  20. Displacement of Monolithic Rubble-Mound Breakwater Crown-Walls

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Harck; Andersen, Lars Vabbersgaard; Andersen, Thomas Lykke

    2012-01-01

    studies on caisson breakwaters, but correction terms are suggested in the present paper to obtain almost equal measured and estimated displacements. This is of great practical importance since many existing rubble-mound crown-walls are subjected to increasing wave loads due to rising sea water level from......This paper evaluates the validity of a simple one-dimensional dynamic analysis as well as a Finite-Element model to determine the sliding of a rubble-mound breakwater crown-wall. The evaluation is based on a case example with real wave load time-series and displacements measured from two...... of the accumulated sliding distance of crown-wall superstructures, which is in contrast to findings from previous similar studies on caisson breakwaters. The calculated sliding distance is approximately three times larger than the measured one when using the original one-dimensional model suggested in previous...

  1. Crustal displacements in Greenland caused by ice mass variability

    DEFF Research Database (Denmark)

    Nielsen, Karina

    The climate of the Earth is changing. A consequence of this is observed at the polar regions such as Greenland, where the ice sheet is melting with an increasing rate. The unloading of ice causes the Earth to respond elastically in terms of uplift and an outward horizontal deformation of the crust....... This motion can be measured by permanent Global Positioning System (GPS) receivers. Hence, the rates of crustal displacement are an indirect measure of the occurring mass changes. Currently, 55 GPS sites are located around the margin of the Greenland ice sheet, continuously providing information about...... the state of the ice sheet. However, the Earth is also adjusting viscoelastically to variations in the late Pleistocene ice sheets i.e. glacial isostatic adjustment (GIA). Observed rates of crustal displacement therefor contain signals from both past and present ice mass variations. Hence, to interpret...

  2. A Differential Reflective Intensity Optical Fiber Angular Displacement Sensor.

    Science.gov (United States)

    Jia, Binghui; He, Lei; Yan, Guodong; Feng, Yong

    2016-09-16

    In this paper, a novel differential reflective intensity optical fiber angular displacement sensor was proposed. This sensor can directly measure the angular and axial linear displacement of a flat surface. The structure of the sensor probe is simple and its basic principle was first analyzed according to the intensity modulation mechanisms. Secondly, in order to trim the dark output voltage to zero, the photoelectric conversion circuit was developed to adjust the signals. Then, the sensor model including the photoelectric conversion circuit has been established, and the influence of design parameters on the sensor output characteristic has been simulated. Finally, the design parameters of the sensor structure were obtained based on the simulation results; and an experimental test system was built for the sensor calibration. Experimental results show that the linear angular range and the sensitivity of the sensor were 74.4 and 0.051 V/°, respectively. Its change rules confirm the operating principle of the sensor well.

  3. A Differential Reflective Intensity Optical Fiber Angular Displacement Sensor

    Science.gov (United States)

    Jia, Binghui; He, Lei; Yan, Guodong; Feng, Yong

    2016-01-01

    In this paper, a novel differential reflective intensity optical fiber angular displacement sensor was proposed. This sensor can directly measure the angular and axial linear displacement of a flat surface. The structure of the sensor probe is simple and its basic principle was first analyzed according to the intensity modulation mechanisms. Secondly, in order to trim the dark output voltage to zero, the photoelectric conversion circuit was developed to adjust the signals. Then, the sensor model including the photoelectric conversion circuit has been established, and the influence of design parameters on the sensor output characteristic has been simulated. Finally, the design parameters of the sensor structure were obtained based on the simulation results; and an experimental test system was built for the sensor calibration. Experimental results show that the linear angular range and the sensitivity of the sensor were 74.4 and 0.051 V/°, respectively. Its change rules confirm the operating principle of the sensor well. PMID:27649199

  4. Optical phase estimation via coherent state and displaced photon counting

    CERN Document Server

    Izumi, Shuro; Wakui, Kentaro; Fujiwara, Mikio; Ema, Kazuhiro; Sasaki, Masahide

    2016-01-01

    We consider the phase sensing via weak optical coherent state at quantum limit precision. A new detection scheme for the phase estimation is proposed which is inspired by the suboptimal quantum measurement in coherent optical communication. We theoretically analyze a performance of our detection scheme, which we call the displaced-photon counting, for phase sensing in terms of the Fisher information and show that the displaced-photon counting outperforms the static homodyne and heterodyne detections in wide range of the target phase. The proof-of-principle experiment is performed with linear optics and a superconducting nanowire single photon detector. The result shows that our scheme overcomes the limit of the ideal homodyne measurement even under practical imperfections.

  5. Multiplexed displacement fiber sensor using thin core fiber exciter.

    Science.gov (United States)

    Chen, Zhen; Hefferman, Gerald; Wei, Tao

    2015-06-01

    This letter reports a multiplexed optical displacement sensor using a thin core fiber (TCF) exciter. The TCF exciter is followed by a stripped single mode optical fiber. A small section of buffer is used as the movable component along the single mode fiber. Ultra-weak cladding mode reflection (< - 75 dB) was employed to probe the refractive index discontinuity between the air and buffer coating boundary. The position change of the movable buffer segment results in a delay change of the cladding mode reflection. Thus, it is a measure of the displacement of the buffer segment with respect to the glass fiber. The insertion loss of one sensor was measured to be less than 3 dB. A linear relationship was evaluated between the measurement position and absolute position of the moving actuator. Multiplexed capability was demonstrated and no cross talk was found between the sensors.

  6. Analysis of displacement damage effects on MOS capacitors

    Science.gov (United States)

    Fernández-Martínez, P.; Palomo, F. R.; Hidalgo, S.; Fleta, C.; Campabadal, F.; Flores, D.

    2013-12-01

    Displacement damage effect on MOS capacitors is analyzed in this work with the aid of TCAD simulations. A noticeable capacitance reduction in the accumulation mode is observed in the High Frequency C-V characteristic curve after a 24 GeV proton irradiation. This effect is clearly distinguishable from ionizing damage effects, otherwise negligible under the specific conditions of the experiment. The capacitance reduction is identified with the increase of the substrate resistivity, due to the modification of its effective doping concentration. Supported on a well-established traps model, the expected displacement damage defects are simulated as a function of the fluence, allowing the identification of donor trap levels as the responsible of the phenomenon for p-type substrate MOS capacitors.

  7. DIRECT DISPLACEMENT OF PARALLEL MECHANISM WITH WAVELET NETWORK

    Institute of Scientific and Technical Information of China (English)

    CHEN Weishan; CHEN Hua; LIU Junkao

    2007-01-01

    A new method solution for the direct displacement of parallel mechanism, wavelet network method, is proposed. Comparing with the classical analytical and numerical methods, this method can be extended to any parallel mechanism with any selected degree of freedom and configuration. A wavelet network suiting to approach multi-input and multi-output system is constructed. The network is optimized by analyzing the sparseness of input data and selecting the fitting wavelets by orthogonalization method according to the output data. Then it is applied to solve the direct displacement of a general six-degree-of-freedom parallel mechanism as a numerical example. For comparison purposes, a BP neural network is also used for this problem. Simulation results show that the wavelet network performs better than BP neural network. In addition, the wavelet network learns much faster than BP network.

  8. Displaceable spur gear torque controlled driver and method

    Science.gov (United States)

    Cook, Joseph S., Jr. (Inventor)

    1994-01-01

    Methods and apparatus are provided for a torque driver including a laterally displaceable gear support member to carry an output spur gear. A biasing assembly biases the output spur gear into engagement with a pinion to which is applied an input torque greater than a desired output torque limit for a threaded fastener such as a nut or screw. A coiled output linkage connects the output spur gear with a fastener adaptor which may be a socket for a nut. A gear tooth profile provides a separation force that overcomes the bias to limit torque at the desired torque limit. Multiple fasteners may be rotated simultaneously to a desired torque limit if additional output spur gears are provided. A gauged selector mechanism is provided to laterally displace multiple driver members for fasteners arranged in differing configurations. The torque limit is selectably adjustable and may be different for fasteners within the same fastener configuration.

  9. Study of tympanic membrane displacements with digital holographic interferometry

    Science.gov (United States)

    Hernández-Montes, María del Socorro; Mendoza-Santoyo, Fernando; Muñoz-Solís, Silvino

    2010-09-01

    The study of the tympanic membrane is fundamental because it is one of the most important components of the middle ear. By finding the membrane's vibration patterns and quantifying the induced displacement, it is possible to characterize and determine its physiological state. Digital Holographic Interferometry (DHI) has proved to be a promising optical non-invasive and quasi-real time method for the investigation of different mechanical parameters of biological tissues. In this paper, we present a digital holographic interferometry setup used to measure the frequency response of the tympanic membrane in post-mortem cats subject to acoustic stimuli in the range of 485 Hz up to 10 kHz. We show the resonant vibration patterns found for this range of frequencies and the corresponding displacement amplitudes induced by the acoustic waves. The results show the potential that this method has to help improve the understanding of the tympanic membrane's working mechanisms.

  10. Influence of groundwater level to slope displacement by geodetic method

    Science.gov (United States)

    Sadarviana, Vera; Abidin, Hasanuddin Z.; Santoso, Djoko; Kahar, Joenil; Achmad R., T.

    2016-05-01

    In the rainy season, Indonesia often experience landslide disasters. Rainwater flows on the surface of the ground and partially into the ground, and changing the groundwater level (GWL) which can cause pressure on surrounding material. Water becomes the main factor that triggered landslides because water causes pressure force on the slopes that are prone to move. With the geometric approach, slope material displacement vectors can be known, including the origin of the material pressure using dynamic mathematical model that considers GWL. The data was used 5 campaigns of GPS observations. The results are obtained the correlation coefficients between coefficient changes in groundwater levels to the vector position as a representative of correlation between the physical and geometric parameters. There is relatively strong because of the value of the average correlation coefficient is 0.91997. Further, curves between changes in groundwater levels and the displacement position shows that the greater the groundwater levels, the greater the material position shift occurs.

  11. Vertical Temperature Distribution in a Room with Displacement Ventilation

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    A displacement ventilation system exploits the use of energy efficiently because it is possible to remove exhaust air from a room with a temperature that is several degrees above the temperature in the occupied zone. This process will allow a higher air inlet temperature at the same load...... to consider the temperature gradient in the occupied zone, as well as the asymmetric radiation from the ceiling, in connection with the design of a displacement ventilation system and the evaluation of thermal comfort. This paper will introduce five temperature distribution models with different levels...... in comparison with mixing ventilation. It is necessary to have a design method for the temperature distribution used for instance in connection with the tlow element method and the energy calculations. The temperature distribution is also important in connection with thermal comfort in a room. It is necessary...

  12. Transverse-displacement stabilizer for passive magnetic bearing systems

    Energy Technology Data Exchange (ETDEWEB)

    Post, Richard F

    2017-03-07

    The invention provides a way re-center a rotor's central longitudinal rotational axis with a desired system longitudinal axis. A pair of planar semicircular permanent magnets are pieced together to form a circle. The flux from each magnet is pointed in in opposite directions that are both parallel with the rotational axis. A stationary shorted circular winding the plane of which is perpendicular to the system longitudinal axis and the center of curvature of the circular winding is positioned on the system longitudinal axis. Upon rotation of the rotor, when a transverse displacement of the rotational axis occurs relative to the system longitudinal axis, the winding will experience a time-varying magnetic flux such that an alternating current that is proportional to the displacement will flow in the winding. Such time-varying magnetic flux will provide a force that will bring the rotor back to its centered position about the desired axis.

  13. Temporomandibular joint loads in subjects with and without disc displacement.

    Science.gov (United States)

    Iwasaki, Laura R; Crosby, Michael J; Gonzalez, Yoly; McCall, Willard D; Marx, David B; Ohrbach, Richard; Nickel, Jeffrey C

    2009-01-01

    The likelihood of development of degenerative joint disease (DJD) of the temporomandibular joint (TMJ) is related to the integrity of the TMJ disc. Predilection for mechanical failure of the TMJ disc may reflect inter-individual differences in TMJ loads. Nine females and eight males in each of normal TMJ disc position and bilateral disc displacement diagnostic groups consented to participate in our study. Disc position was determined by bilateral magnetic resonance images of the joints. Three-dimensional (3D) anatomical geometry of each subject was used in a validated computer-assisted numerical model to calculate ipsilateral and contralateral TMJ loads for a range of biting positions (incisor, canine, molar) and angles (1-13). Each TMJ load was a resultant vector at the anterosuperi or-most mediolateral midpoint the condyle and characterized in terms of magnitude and 3D orientation. Analysis of variance (ANOVA) was used to test for effects of biting position and angle on TMJ loads. Mean TMJ loads in subjects with disc displacement were 9.5-69% higher than in subjects with normal disc position. During canine biting, TMJ loads in subjects with disc displacement were 43% (ipsilateral condyle, p=0.029) and 49% (contralateral condyle, p=0.015) higher on average than in subjects with normal disc position. Biting angle effects showed that laterally directed forces on the dentition produced ipsilateral joint loads, which on average were 69% higher (p=0.002) compared to individuals with normal TMJ disc position. The data reported here describe large differences in TMJ loads between individuals with disc displacement and normal disc position. The results support future investigations of inter-individual differences in joint mechanics as a variable in the development of DJD of the TMJ.

  14. A Copernicus downstream service for surface displacement monitoring in Germany

    Science.gov (United States)

    Cahyadi Kalia, Andre; Frei, Michaela; Lege, Thomas

    2016-04-01

    SAR Interferometry is a powerful technique able to detect and monitor various surface displacements caused by e.g. gravitative mass movement, subrosion, groundwater extraction, fluid injection, natural gas extraction. These processes can e.g. cause damage to buildings, infrastructure, affect ecosystems, agriculture and the economic use of the geological underground by influencing the hydro(geo)logical setting. Advanced techniques of interferometric processing (Persistent Scatterer Interferometry, PSI) allow highly precise displacement measurements (mm precision) by analyzing stacks of SAR imagery. The PSI mapping coverage can be increased to entire nations by using several adjacent satellite tracks. In order to assist the operational use of this technique a German-wide, officially approved, PSI dataset is under development. The intention of this presentation is to show i) the concept of the Copernicus downstream service for surface displacement monitoring in Germany and ii) a pilot study to exemplarily demonstrate the workflow and potential products from the Copernicus downstream service. The pilot study is focusing on the built up of an officially approved wide-area PSI dataset. The study area covers an area of more than 30.000 km² and is located in the Northwest German Basin. Several natural processes (e.g. compaction of marine sediments, peat loss) and anthropogenic activities (e.g. natural gas extraction, rock salt mining) are causing surface displacements in the study area. The PSI analysis is based on six ERS-1/-2 data stacks covering the timespan from 1992 until 2001. Each data stack consists of 49 to 73 ERS-1/-2 SAR images. A comparison of the PSI results with thematic data (e.g. volume and location of extracted natural gas) strongly indicates that a part of the detected land subsidence is caused by natural gas extraction. Furthermore, land subsidence caused by e.g. fluid injection and rock salt mining were successfully detected by the PSI analysis.

  15. Self-Organized Collective Displacements of Self-Driven Individuals

    Science.gov (United States)

    Albano, Ezequiel V.

    1996-09-01

    An archetype model for the collective displacements of self-driven individuals, aimed to describe the dynamic of flocking behavior among living things, is presented and studied. Processes such as growth, death, survival, self-propagation, and competition are considered. It is shown that systems ruled by the model self-organize into a critical state exhibiting power-law behavior in both the distribution of population avalanches and the spatial correlation between individuals.

  16. Centimeter Cosmo-Skymed Range Measurements for Monitoring Ground Displacements

    Science.gov (United States)

    Fratarcangeli, F.; Nascetti, A.; Capaldo, P.; Mazzoni, A.; Crespi, M.

    2016-06-01

    The SAR (Synthetic Aperture Radar) imagery are widely used in order to monitor displacements impacting the Earth surface and infrastructures. The main remote sensing technique to extract sub-centimeter information from SAR imagery is the Differential SAR Interferometry (DInSAR), based on the phase information only. However, it is well known that DInSAR technique may suffer for lack of coherence among the considered stack of images. New Earth observation SAR satellite sensors, as COSMO-SkyMed, TerraSAR-X, and the coming PAZ, can acquire imagery with high amplitude resolutions too, up to few decimeters. Thanks to this feature, and to the on board dual frequency GPS receivers, allowing orbits determination with an accuracy at few centimetres level, the it was proven by different groups that TerraSAR-X imagery offer the capability to achieve, in a global reference frame, 3D positioning accuracies in the decimeter range and even better just exploiting the slant-range measurements coming from the amplitude information, provided proper corrections of all the involved geophysical phenomena are carefully applied. The core of this work is to test this methodology on COSMO-SkyMed data acquired over the Corvara area (Bolzano - Northern Italy), where, currently, a landslide with relevant yearly displacements, up to decimeters, is monitored, using GPS survey and DInSAR technique. The leading idea is to measure the distance between the satellite and a well identifiable natural or artificial Persistent Scatterer (PS), taking in account the signal propagation delays through the troposphere and ionosphere and filtering out the known geophysical effects that induce periodic and secular ground displacements. The preliminary results here presented and discussed indicate that COSMO-SkyMed Himage imagery appear able to guarantee a displacements monitoring with an accuracy of few centimetres using only the amplitude data, provided few (at least one) stable PS's are available around the

  17. Acutely calcified hematoma mimicking a displaced medial epicondyle fracture

    Directory of Open Access Journals (Sweden)

    Majed Addie

    2009-01-01

    Full Text Available We present an interesting and unusual case of an acutely calcified pin-site infection hematoma mimicking a displaced cartilaginous medial epicondyle, in a child with a Gartland type III fracture. The treatment of such pathology could be confusing and may interfere with the correct clinical decision-making process. To our knowledge, this is the first presentation of such a case.

  18. [Adaptation and mental-hygienic characteristics of internally displaced adolescents].

    Science.gov (United States)

    Maksimović, Milos; Kocijancić, Radojka; Backović, Dusan; Ille, Tatjana; Paunović, Katarina

    2005-01-01

    The change in socio-economic status, drastic decrease in living standards, war, and the introduction of sanctions to our country were complicated in addition by a large number of internally displaced people from Kosovo, which culminated with the 1999 NATO bombing. The aim of this investigation was to estimate the influence of internal displacement on the adaptation and mental health of adolescents. The investigation was conducted on 238 adolescents, comprising a control group of 206 adolescents from Belgrade and 32 internally displaced adolescents from Kosovo. A specific questionnaire regarding habits, behaviour, and psychosomatic state was used, as well as the Cornell Medical Index and the Eysenck Personality Questionnaire. Internally displaced adolescents from Kosovo exhibited greater difficulties in adapting and had worse school records than adolescents from Belgrade, one year after the change in their location. Immediately after the NATO bombing, both groups reacted in the same way: they often talked about the events they had survived, they were afraid of the sounds of alarm sirens and of aeroplanes, and in addition had similar dreams (no statistical variation between the groups). Emotional disturbances, one year after the bombing, were not observed in 40.6% of adolescents from Kosovo, compared to the figure of 74.8% for adolescents from Belgrade. Adolescents from Belgrade consumed alcohol significantly more often: 75.7% compared to 56.3% for adolescents from Kosovo. In addition, 20.4% of adolescents from Belgrade consumed psychoactive substances compared to 6.3% of adolescents from Kosovo. There was no significant difference between the examined groups in the total scores on the scale for neuroticism. All in all, the girls from both examined groups displayed neurotic tendencies more frequently than the boys.

  19. Temporomandibular joint loads in subjects with and without disc displacement

    Directory of Open Access Journals (Sweden)

    Laura Rei Iwasaki

    2009-12-01

    Full Text Available The likelihood of development of degenerative joint disease (DJD of the temporomandibular joint (TMJ is related to the integrity of the TMJ disc. Predilection for mechanical failure of the TMJ disc may reflect inter-individual differences in TMJ loads. Nine females and eight males in each of normal TMJ disc position and bilateral disc displacement diagnostic groups consented to participate in our study. Disc position was determined by bilateral magnetic resonance images of the joints. Three-dimensional (3D anatomical geometry of each subject was used in a validated computer-assisted numerical model to calculate ipsilateral and contralateral TMJ loads for a range of biting positions (incisor, canine, molar and angles (1-13. Each TMJ load was a resultant vector at the anterosuperior-most mediolateral midpoint on the condyle and characterized in terms of magnitude and 3D orientation. Analysis of variance (ANOVA was used to test for effects of biting position and angle on TMJ loads. Mean TMJ loads in subjects with disc displacement were 9.5-69% higher than in subjects with normal disc position. During canine biting, TMJ loads in subjects with disc displacement were 43% (ipsilateral condyle, p=0.029 and 49% (contralateral condyle, p=0.015 higher on average than in subjects with normal disc position. Biting angle effects showed that laterally directed forces on the dentition produced ipsilateral joint loads, which on average were 69% higher (p=0.002 compared to individuals with normal TMJ disc position. The data reported here describe large differences in TMJ loads between individuals with disc displacement and normal disc position. The results support future investigations of inter-individual differences in joint mechanics as a variable in the development of DJD of the TMJ.

  20. Determination of Displacement Geodetic Network Points, Fredericton Approach

    OpenAIRE

    Vrečko, Anja

    2010-01-01

    This graduate thesis deals with the Fredericton approach for determining displacements in geodetic networks. In the introduction strain analysis is presented from a geodetic point of view. Special emphasis is placed on the problem of geodetic datum. It is followed by a theoretical explanation of the method in five steps: adjustment of observation for each epoch, preliminary identification of deformation models, estimation of deformation parameters, checking the deformation models and selectin...

  1. A novel inductive technique for microcantilever displacement detection

    Institute of Scientific and Technical Information of China (English)

    Madhu; Santosh; K; Mutyala; Kody; Varahramyan

    2011-01-01

    A novel inductive technique for the detection of microcantilever displacement for sensing applications was presented.We highlight the basic structure and evaluate its characteristics with the aid of modeling and simulation.Results generated by numerical simulations using ANSOFT are compared with those obtained from an equivalent circuit model using PSPICE.There are indications that the sensitivity of the inductive cantilever is about one order of magnitude higher as compared to piezoresistive silicon can...

  2. Single-Photon Momentum Displacement in Resonator Array with Optomechanics

    Science.gov (United States)

    Tian, T.; Li, Q.; Zhou, Lan; Song, L. J.

    2016-10-01

    We present the single-photon scattering in a resonator array system with optomechanical by solving the Lippmann-Schwinger equation iteratively. Up to the first order of the radiation pressure interaction, the single-photon transport is formulated as a three-channel scattering process. We calculate the scattering currents in different channels and obtain the transmission spectrum which shows a momentum displacement effect.

  3. Propagation error minimization method for multiple structural displacement monitoring system

    Science.gov (United States)

    Jeon, Haemin; Shin, Jae-Uk; Myung, Hyun

    2013-04-01

    In the previous study, a visually servoed paired structured light system (ViSP) which is composed of two sides facing each other, each with one or two lasers, a 2-DOF manipulator, a camera, and a screen has been proposed. The lasers project their parallel beams to the screen on the opposite side and 6-DOF relative displacement between two sides is estimated by calculating positions of the projected laser beams and rotation angles of the manipulators. To apply the system to massive civil structures such as long-span bridges or high-rise buildings, the whole area should be divided into multiple partitions and each ViSP module is placed in each partition in a cascaded manner. In other words, the movement of the entire structure can be monitored by multiplying the estimated displacements from multiple ViSP modules. In the multiplication, however, there is a major problem that the displacement estimation error is propagated throughout the multiple modules. To solve the problem, propagation error minimization method (PEMM) which uses Newton-Raphson formulation inspired by the error back-propagation algorithm is proposed. In this method, a propagation error at the last module is calculated and then the estimated displacement from ViSP at each partition is updated in reverse order by using the proposed PEMM that minimizes the propagation error. To verify the performance of the proposed method, various simulations and experimental tests have been performed. The results show that the propagation error is significantly reduced after applying PEMM.

  4. Damping of Torsional Beam Vibrations by Control of Warping Displacement

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker; Hoffmeyer, David; Ejlersen, Christian

    2016-01-01

    Supplemental damping of torsional beam vibrations is considered by viscous bimoments acting on the axial warping displacement at the beam supports. The concept is illustrated by solving the governing eigenvalue problem for various support configurations with the applied bimoments represented...... as viscous boundary conditions. It is demonstrated that properly calibrated viscous bimoments introduce a significant level of supplemental damping to the targeted vibration mode and that the attainable damping can be accurately estimated from the two undamped problems associated with vanishing and infinite...

  5. A displacement spindle in a micro/nano level

    Science.gov (United States)

    Fan, Kuang-Chao; Lai, Zi-Fa; Wu, Peitsung; Chen, Yung-Chang; Chen, Yejin; Jäger, Gerd

    2007-06-01

    This paper presents two micro/nano level displacement sensors, which consist of a mini LDGI (linear diffraction grating interferometer) and a focus probe. These two sensors are integrated into the spindle system of a micro/nano-CMM. This micro/nano spindle system is fixed on a rectangular granite bridge to achieve the z-axis function. The motion of the spindle is driven by an ultrasonic motor on a precision cross-roller slide. Its displacement is fed back by the LDGI. A DVD pick-up head is modified with its S-curve principle as the non-contact focus probe. Mounting the probe onto the spindle head, it is possible to achieve a large displacement and nanoresolution measuring spindle system with a feedback nanomotion control scheme. After accuracy calibration and error compensation, the spindle motion to 10 mm can perform 10 nm positioning accuracy and 30 nm measurement accuracy. Experiments on some ultraprecision profiles have shown the capability of this spindle system.

  6. Seismic stability and permanent displacement of landfill along liners

    Institute of Scientific and Technical Information of China (English)

    CHEN YunMin; GAO Deng; ZHU Bin; CHEN RenPeng

    2008-01-01

    The three-part wedge limit equilibrium method for seismic stability analysis of the landfill along liners is presented. The approximate solutions of the factor of safety and the yield acceleration coefficient are obtained. Parametric studies show that the interface strength of liners, the shear strength of waste and the height of retaining wall can influence the seismic stability of landfill along liners. The density and the shear wave velocity of the field waste are obtained by the borehole investigation and the spectral analysis of surface wave (SASW), respectively. The strain-dependent shear modulus and damping ratio of the artifical waste are obtained by the moderate-scale dynamic triaxial tests. The one- dimensional (1D) equivalent linear dynamic response analysis is used to calculate the horizontal equivalent seismic coefficient-time history of the sliding landfill during earthquake. The seismic permanent displacement of the landfill along liners with different site conditons and heights is evaluated by the Newmark method. The catculated results show that ratio of ky/kmax, site conditions, the amplitude and frequency content of the bedrock motion can affect the seismic permanent displacement of the landfill along liners in some degree. Finally, the seismic stability and permanent displacements of three expanded configurations of a certain landfill case are analyzed.

  7. A Differential Monolithically Integrated Inductive Linear Displacement Measurement Microsystem

    Directory of Open Access Journals (Sweden)

    Matija Podhraški

    2016-03-01

    Full Text Available An inductive linear displacement measurement microsystem realized as a monolithic Application-Specific Integrated Circuit (ASIC is presented. The system comprises integrated microtransformers as sensing elements, and analog front-end electronics for signal processing and demodulation, both jointly fabricated in a conventional commercially available four-metal 350-nm CMOS process. The key novelty of the presented system is its full integration, straightforward fabrication, and ease of application, requiring no external light or magnetic field source. Such systems therefore have the possibility of substituting certain conventional position encoder types. The microtransformers are excited by an AC signal in MHz range. The displacement information is modulated into the AC signal by a metal grating scale placed over the microsystem, employing a differential measurement principle. Homodyne mixing is used for the demodulation of the scale displacement information, returned by the ASIC as a DC signal in two quadrature channels allowing the determination of linear position of the target scale. The microsystem design, simulations, and characterization are presented. Various system operating conditions such as frequency, phase, target scale material and distance have been experimentally evaluated. The best results have been achieved at 4 MHz, demonstrating a linear resolution of 20 µm with steel and copper scale, having respective sensitivities of 0.71 V/mm and 0.99 V/mm.

  8. Allosteric indicator displacement enzyme assay for a cyanogenic glycoside.

    Science.gov (United States)

    Jose, D Amilan; Elstner, Martin; Schiller, Alexander

    2013-10-18

    Indicator displacement assays (IDAs) represent an elegant approach in supramolecular analytical chemistry. Herein, we report a chemical biosensor for the selective detection of the cyanogenic glycoside amygdalin in aqueous solution. The hybrid sensor consists of the enzyme β-glucosidase and a boronic acid appended viologen together with a fluorescent reporter dye. β-Glucosidase degrades the cyanogenic glycoside amygdalin into hydrogen cyanide, glucose, and benzaldehyde. Only the released cyanide binds at the allosteric site of the receptor (boronic acid) thereby inducing changes in the affinity of a formerly bound fluorescent indicator dye at the other side of the receptor. Thus, the sensing probe performs as allosteric indicator displacement assay (AIDA) for cyanide in water. Interference studies with inorganic anions and glucose revealed that cyanide is solely responsible for the change in the fluorescent signal. DFT calculations on a model compound revealed a 1:1 binding ratio of the boronic acid and cyanide ion. The fluorescent enzyme assay for β-glucosidase uses amygdalin as natural substrate and allows measuring Michaelis-Menten kinetics in microtiter plates. The allosteric indicator displacement assay (AIDA) probe can also be used to detect cyanide traces in commercial amygdalin samples.

  9. A Differential Monolithically Integrated Inductive Linear Displacement Measurement Microsystem

    Science.gov (United States)

    Podhraški, Matija; Trontelj, Janez

    2016-01-01

    An inductive linear displacement measurement microsystem realized as a monolithic Application-Specific Integrated Circuit (ASIC) is presented. The system comprises integrated microtransformers as sensing elements, and analog front-end electronics for signal processing and demodulation, both jointly fabricated in a conventional commercially available four-metal 350-nm CMOS process. The key novelty of the presented system is its full integration, straightforward fabrication, and ease of application, requiring no external light or magnetic field source. Such systems therefore have the possibility of substituting certain conventional position encoder types. The microtransformers are excited by an AC signal in MHz range. The displacement information is modulated into the AC signal by a metal grating scale placed over the microsystem, employing a differential measurement principle. Homodyne mixing is used for the demodulation of the scale displacement information, returned by the ASIC as a DC signal in two quadrature channels allowing the determination of linear position of the target scale. The microsystem design, simulations, and characterization are presented. Various system operating conditions such as frequency, phase, target scale material and distance have been experimentally evaluated. The best results have been achieved at 4 MHz, demonstrating a linear resolution of 20 µm with steel and copper scale, having respective sensitivities of 0.71 V/mm and 0.99 V/mm. PMID:26999146

  10. Active Control Does Not Eliminate Motion-Induced Illusory Displacement

    Directory of Open Access Journals (Sweden)

    Ian M. Thornton

    2011-05-01

    Full Text Available When the sine-wave grating of a Gabor patch drifts to the left or right, the perceived position of the entire object is shifted in the direction of local motion. In the current work we explored whether active control of the physical position of the patch overcomes such motion induced illusory displacement. In Experiment 1 we created a simple computer game and asked participants to continuously guide a Gabor patch along a randomly curving path using a joystick. When the grating inside the Gabor patch was stationary, participants could perform this task without error. When the grating drifted to either left or right, we observed systematic errors consistent with previous reports of motion-induced illusory displacement. In Experiment 2 we created an iPad application where the built-in accelerometer tilt control was used to steer the patch through as series of “gates”. Again, we observed systematic guidance errors that depended on the direction and speed of local motion. In conclusion, we found no evidence that participants could adapt or compensate for illusory displacement given active control of the target.

  11. Analysis of nematode mechanics by piezoresistive displacement clamp.

    Science.gov (United States)

    Park, Sung-Jin; Goodman, Miriam B; Pruitt, Beth L

    2007-10-30

    Studying animal mechanics is critical for understanding how signals in the neuromuscular system give rise to behavior and how force-sensing organs and sensory neurons work. Few techniques exist to provide forces and displacements appropriate for such studies. To address this technological gap, we developed a metrology using piezoresistive cantilevers as force-displacement sensors coupled to a feedback system to apply and maintain defined load profiles to micrometer-scale animals. We show that this system can deliver forces between 10(-8) and 10(-3) N across distances of up to 100 mum with a resolution of 12 nN between 0.1 Hz and 100 kHz. We use this new metrology to show that force-displacement curves of wild-type nematodes (Caenorhabditis elegans) are linear. Because nematodes have approximately cylindrical bodies, this finding demonstrates that nematode body mechanics can be modeled as a cylindrical shell under pressure. Little is known about the relative importance of hydrostatic pressure and shell mechanics, however. We show that dissipating pressure by cuticle puncture or decreasing it by hyperosmotic shock has only a modest effect on stiffness, whereas defects in the dpy-5 and lon-2 genes, which alter body shape and cuticle proteins, decrease and increase stiffness by 25% and 50%, respectively. This initial analysis of C. elegans body mechanics suggests that shell mechanics dominates stiffness and is a first step in understanding how body mechanics affect locomotion and force sensing.

  12. SIFT flow for large-displacement object tracking.

    Science.gov (United States)

    Zhang, Huanlong; Hu, Shiqiang; Zhang, Xiaoyu

    2014-09-20

    Traditional tracking methods place an emphasis on how to cope with the variations in target appearance effectively. However, when the motion displacement of the target between image frames becomes larger, these methods may be unstable. This paper presents a novel (to our knowledge) visual object tracking method. In this method, we first introduce scale-invariant feature transform (SIFT) flow into the tracking problem and develop a real-time motion prediction method to capture large displacement between consecutive image frames. Then we use belief propagation (BP) to convert the problem of finding maximum a posteriori probability (MAP) to globally minimizing an energy function to get the best matching pairs of points for producing good candidate regions of the target. And last, the refined point trajectories are obtained according to the bidirectional flow field consistency estimation and covariance region descriptor matching, which can update model states efficiently so as to achieve enhanced robustness for visual tracking. Compared with the state-of-art tracking methods, the experimental results demonstrate that the proposed algorithm shows favorable performance when the object undergoes large motion displacement between image frames.

  13. A Differential Monolithically Integrated Inductive Linear Displacement Measurement Microsystem.

    Science.gov (United States)

    Podhraški, Matija; Trontelj, Janez

    2016-03-17

    An inductive linear displacement measurement microsystem realized as a monolithic Application-Specific Integrated Circuit (ASIC) is presented. The system comprises integrated microtransformers as sensing elements, and analog front-end electronics for signal processing and demodulation, both jointly fabricated in a conventional commercially available four-metal 350-nm CMOS process. The key novelty of the presented system is its full integration, straightforward fabrication, and ease of application, requiring no external light or magnetic field source. Such systems therefore have the possibility of substituting certain conventional position encoder types. The microtransformers are excited by an AC signal in MHz range. The displacement information is modulated into the AC signal by a metal grating scale placed over the microsystem, employing a differential measurement principle. Homodyne mixing is used for the demodulation of the scale displacement information, returned by the ASIC as a DC signal in two quadrature channels allowing the determination of linear position of the target scale. The microsystem design, simulations, and characterization are presented. Various system operating conditions such as frequency, phase, target scale material and distance have been experimentally evaluated. The best results have been achieved at 4 MHz, demonstrating a linear resolution of 20 µm with steel and copper scale, having respective sensitivities of 0.71 V/mm and 0.99 V/mm.

  14. Seismic stability and permanent displacement of landfill along liners

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The three-part wedge limit equilibrium method for seismic stability analysis of the landfill along liners is presented. The approximate solutions of the factor of safety and the yield acceleration coefficient are obtained. Parametric studies show that the interface strength of liners, the shear strength of waste and the height of retaining wall can influence the seismic stability of landfill along liners. The density and the shear wave velocity of the field waste are obtained by the borehole investigation and the spectral analysis of surface wave (SASW), respectively. The strain-dependent shear modulus and damping ratio of the artifical waste are obtained by the moderate-scale dynamic triaxial tests. The onedimensional (1D) equivalent linear dynamic response analysis is used to calculate the horizontal equivalent seismic coefficient-time history of the sliding landfill during earthquake. The seismic permanent displacement of the landfill along liners with different site conditons and heights is evaluated by the Newmark method. The catculated results show that ratio of ky /kmax, site conditions, the amplitude and frequency content of the bedrock motion can affect the seismic permanent displacement of the landfill along liners in some degree. Finally, the seismic stability and permanent displacements of three expanded configurations of a certain landfill case are analyzed.

  15. A novel bio-sensor based on DNA strand displacement.

    Directory of Open Access Journals (Sweden)

    Xiaolong Shi

    Full Text Available DNA strand displacement technology performs well in sensing and programming DNA segments. In this work, we construct DNA molecular systems based on DNA strand displacement performing computation of logic gates. Specifically, a class of so-called "DNA neurons" are achieved, in which a "smart" way inspired by biological neurons encoding information is developed to encode and deliver information using DNA molecules. The "DNA neuron" is bistable, that is, it can sense DNA molecules as input signals, and release "negative" or "positive" signals DNA molecules. We design intelligent DNA molecular systems that are constructed by cascading some particularly organized "DNA neurons", which could perform logic computation, including AND, OR, XOR logic gates, automatically. Both simulation results using visual DSD (DNA strand displacement software and experimental results are obtained, which shows that the proposed systems can detect DNA signals with high sensitivity and accretion; moreover, the systems can process input signals automatically with complex nonlinear logic. The method proposed in this work may provide a new way to construct a sensitive molecular signal detection system with neurons spiking behavior in vitro, and can be used to develop intelligent molecular processing systems in vivo.

  16. Iatrogenic displacement of impacted third molar. Case report

    Directory of Open Access Journals (Sweden)

    Konstantinos TSIKLAKIS

    2013-08-01

    Full Text Available Peri-operative complications may occur during the surgical extraction of impacted mandibular third molars such as the iatrogenic displacement of the whole tooth or a tooth fragment in to the adjacent anatomical structures. The purpose of this case report is to present the diagnosis and treatment planning, as well as the surgical management required for the removal of a 3rd molar displaced in the soft tissues of the floor of the mouth. A 38-year old male patient presented to the Dental School, complaining of pain around the left submandibular area that started three months after the extraction of the impacted mandibular left third molar. At the radiographic examination the tooth was detected in the soft tissues of the floor of the mouth and in close proximity to the lingual plate. It is noteworthy that the patient was under the assumption that the tooth had been extracted successfully. Radiographically the tooth appeared at an 180° turnaround from its original position. Surgical extraction of the displaced third molar took place under local anaesthesia. No post-operative complications were reported. Thorough clinical and radiographic examination, as well as competency at surgical procedures are prerequisites for the appropriate surgical management of impacted third molars.

  17. A Symptomatic Displaced Os Odontoideum: A Case Report

    Directory of Open Access Journals (Sweden)

    Farshad Nikouei

    2016-05-01

    Full Text Available Introduction Os odontoideum (OO is a form of odontoid anomaly presented by a separate ossicle with a smooth, sclerotic border not fused with C2 body. The current paper reports a boy with irreducible displaced os odontoideum with severe neurologic deficit after a minor trauma. Case Presentation A 16-year-old boy admitted in the center due to neck pain and torticollis with neurologic deficit. He had a history of multiple minor traumas. Advanced imaging assessment demonstrated displaced os odontoideum with minimal space available for cord (SAC and myelomalacia. After unsuccessful closed reduction a 2-stage operation was planned: first, the anterior transoral release and odontoid resection with subsequent halo-traction and second, the posterior atlanto-axial instrumented fusion with bilateral C1 hook and C2 pedicular screws. Conclusions Congenital anomalies of the odontoid are associated with C1-C2 instability that can be subluxated or dislocated with minor trauma and cause permanent neurologic deficit or even death. When acute cervical spine trauma is imaged, os odontoideum should be distinguished from an acute dens fracture with a multimodality imaging approach including computed tomography (CT, magnetic resonance imaging (MRI and radiography. Here is the report of a rare case with irreducible displaced os odontiodeum treated him with anterior release, odontoid resection and posterior C1-C2 instrumented fusion.

  18. Pneumatic displacement without tissue plasminogen activator in premacular subhyaloid hemorrhage

    Directory of Open Access Journals (Sweden)

    Rumita S. Kadarisman

    2007-06-01

    Full Text Available To assess the efficacy and safety of intravitreal injection of Sulfur Hexafluoride (SF6 gas without the use of tissue Plasminogen Activator (tPA in premacular Subhyaloid Hemorrhage (SHH, 5 eyes of 5 patients with premacular SHH were enrolled. After performing paracentesis of the anterior chamber, 0.3 ml pure SF6 gas was injected through pars plana with a 30 gauge needle. Facedown position was maintained for 5 days. Subhyaloid Hemorrhage was displaced in 4/5 (80% eyes with a duration of SHH less than 2 weeks. The pre-injection visual acuity of all 5 eyes was finger counting and improved in 4/5 ( 80% eyes within 3 days to 7 days post-injection to 6/20 - 6/6. The underlying disease was hypercoagulation in 1 patient, diabetes mellitus in 2 patients, hypertension in 1 patient and unknown in 1 patient. No complications were encountered. In conclusion, SF6 gas injected into the vitreous without the use of tPA, can displace SHH if performed within 14 days of duration, and results in rapid visual recovery. This procedure is proven to be safe. (Med J Indones 2007; 16:104-7 Keywords: subhyaloid hemorrhage, pneumatic displacement, sulfur hexafluoride gas

  19. Myocardial strains from 3D displacement encoded magnetic resonance imaging

    Directory of Open Access Journals (Sweden)

    Kindberg Katarina

    2012-04-01

    Full Text Available Abstract Background The ability to measure and quantify myocardial motion and deformation provides a useful tool to assist in the diagnosis, prognosis and management of heart disease. The recent development of magnetic resonance imaging methods, such as harmonic phase analysis of tagging and displacement encoding with stimulated echoes (DENSE, make detailed non-invasive 3D kinematic analyses of human myocardium possible in the clinic and for research purposes. A robust analysis method is required, however. Methods We propose to estimate strain using a polynomial function which produces local models of the displacement field obtained with DENSE. Given a specific polynomial order, the model is obtained as the least squares fit of the acquired displacement field. These local models are subsequently used to produce estimates of the full strain tensor. Results The proposed method is evaluated on a numerical phantom as well as in vivo on a healthy human heart. The evaluation showed that the proposed method produced accurate results and showed low sensitivity to noise in the numerical phantom. The method was also demonstrated in vivo by assessment of the full strain tensor and to resolve transmural strain variations. Conclusions Strain estimation within a 3D myocardial volume based on polynomial functions yields accurate and robust results when validated on an analytical model. The polynomial field is capable of resolving the measured material positions from the in vivo data, and the obtained in vivo strains values agree with previously reported myocardial strains in normal human hearts.

  20. Probing neutrino mass with displaced vertices at the Tevatron

    CERN Document Server

    De Campos, F; Magro, M B; Porod, Werner; Restrepo, D; Valle, J W F

    2005-01-01

    Supersymmetric extensions of the standard model exhibiting bilinear R-parity violation can generate naturally the observed neutrino mass spectrum as well mixings. One interesting feature of these scenarios is that the lightest supersymmetric particle (LSP) is unstable, with several of its decay properties predicted in terms of neutrino mixing angles. A smoking gun of this model in colliders is the presence of displaced vertices due to LSP decays in large parts of the parameter space. In this work we focus on the simplest model of this type that comes from minimal supergravity with universal R-parity conserving soft breaking of supersymmetry (RmSUGRA). We evaluate the potentiality of the Fermilab Tevatron to probe the RmSUGRA parameters through the analysis of events possessing two displaced vertices stemming from LSP decays. We show that requiring two displaced vertices in the events leads to a reach in m_{1/2} twice the one in the usual multilepton signals in a large fraction of the parameter space.

  1. Displacements and stresses in bending of circular perforated plate

    Science.gov (United States)

    Atanasiu, C.; Sorohan, St.

    2016-08-01

    The flat plates, perforated by a large number of holes are widely used in the engineering, especially in the component of the process equipment. Strength calculations and experimental methods used in the actual literature for study perforated plates, do not present the problem in all its complexity for stress distribution and displacements. Research and doctoral theses in last decades, with methods characteristic of the respective periods were engaged either perforated plates considered infinite and requested the median plane or rarely, plate loaded normal to the median plane, with a small number of holes. In this work the stress distribution and displacement is presented for a circular plate perforated by 96 holes arranged in a grid of squares, simply supported on the outline and loaded through a central concentrated force or by uniformly distributed load. It conducted a numerical analysis by finite element method (FEM) with a proper meshing of the plate and an experimental study by holographic interferometry. Holographic interferometry method permits to measure, with high accuracy, extremely small displacements and comparing the results with those obtained by FEM becomes sustainable. Supplementary, an analysis of a non-perforated plate with the same dimensions and stiffness, similar loaded, was performed, determining the coefficient of stress concentration for a particular arrangement of holes.

  2. Stable atomic structure of NiTi austenite

    Energy Technology Data Exchange (ETDEWEB)

    Zarkevich, Nikolai A [Ames Laboratory; Johnson, Duane D [Ames Laboratory

    2014-08-01

    Nitinol (NiTi), the most widely used shape-memory alloy, exhibits an austenite phase that has yet to be identified. The usually assumed austenitic structure is cubic B2, which has imaginary phonon modes, hence it is unstable. We suggest a stable austenitic structure that “on average” has B2 symmetry (observed by x-ray and neutron diffraction), but it exhibits finite atomic displacements from the ideal B2 sites. The proposed structure has a phonon spectrum that agrees with that from neutron scattering, has diffraction spectra in agreement with x-ray diffraction, and has an energy relative to the ground state that agrees with calorimetry data.

  3. Atomic Coherent Trapping and Properties of Trapped Atom

    Institute of Scientific and Technical Information of China (English)

    YANG Guo-Jian; XIA Li-Xin; XIE Min

    2006-01-01

    Based on the theory of velocity-selective coherent population trapping, we investigate an atom-laser system where a pair of counterpropagating laser fields interact with a three-level atom. The influence of the parametric condition on the properties of the system such as velocity at which the atom is selected to be trapped, time needed for finishing the coherent trapping process, and possible electromagnetically induced transparency of an altrocold atomic medium,etc., is studied.

  4. The effect of moderators on the reactions of hot hydrogen atoms with methane

    CERN Document Server

    Estrup, Peder J.

    1960-01-01

    The reaction of recoil tritium with methane has been examined in further detail. The previous hypothesis that this system involves a hot displacement reaction of high kinetic energy hydrogen to give CH$_{3}$T, CH$_{2}$T and HT is confirmed. The effect of moderator on this process is studied by the addition of noble gases. As predicted these gases inhibit the hot reaction action, their efficiency in this respect being He > Ne > A > Se. The data are quantitatively in accord with a theory of hot atom kinetics. The mechanism of the hot displacement process is briefly discussed.

  5. Athermalization in atomic force microscope based force spectroscopy using matched microstructure coupling.

    Science.gov (United States)

    Torun, H; Finkler, O; Degertekin, F L

    2009-07-01

    The authors describe a method for athermalization in atomic force microscope (AFM) based force spectroscopy applications using microstructures that thermomechanically match the AFM probes. The method uses a setup where the AFM probe is coupled with the matched structure and the displacements of both structures are read out simultaneously. The matched structure displaces with the AFM probe as temperature changes, thus the force applied to the sample can be kept constant without the need for a separate feedback loop for thermal drift compensation, and the differential signal can be used to cancel the shift in zero-force level of the AFM.

  6. Contribution of Geodetic Datum in GNSS Networks to Monitored Displacements

    Science.gov (United States)

    Ozdemir, Alpay; Dogan, Ugur; Aydin, Cuneyt

    2016-04-01

    The aim of this study is to investigate the effects of datum definition on the monitored displacements of GNSS networks. The datum definition is a significant problem in terms of reliable deformation analysis and interpretation on determining the deformation in GNSS networks. The observations have been analyzed to show the reliability analysis of a group of station in the network and the influence of datum definition on the deformations of GNSS monitoring networks. For this purpose, we studied GPS observations in the CORS-TR network collected on a set of 13 station to detect co-seismic deformation of the 23 October 2011 (Mw=7.2) Van earthquake in the eastern of Turkey. The GPS observations were processed in the ITRF 2008 reference frame using the Bernese 5.2 GNSS software. Seven datum configuration modes which depend on the number of datum stations, which are selected from 9 IGS stations, were defined to determine co-seismic deformation of the Van earthquake and the deformations of GPS stations were computed for every datum definition. Our results indicate that each station showed different temporal behavior and significant relative motions with respect to datum definition. On the other hand, the distribution of the datum stations around the monitored region seems to be very important factor for determining the displacements. To show the effect of datum station distribution, we compare the displacements obtained from two different datum configuration modes (mode 1: 4 datum station "BUCU, GRAZ, MATE, SOFI" located at Eurasian plate, which are far away from the region, and mode 2: 9 datum station "BUCU, GRAZ, MATE, SOFI, TUBI, CRAO, ZECK, NICO, DRAG" located around the region). For instance, co-seismic displacements for station MURA, which is the closest station to the earthquake epicenter (˜43 km), amounted to -82.24 ± 0.60 mm for the north component, 12.01 ± 0.76 mm for the east component and -25.19 ± 2.49 mm for the up component with respect to mode 1, -89

  7. Forced and free displacement characterization of ionic polymer transducers

    Science.gov (United States)

    Akle, Barbar J.; Duncan, Andrew; Akle, Etienne; Wallmersperger, Thomas; Leo, Donald J.

    2009-03-01

    Ionic polymer transducers (IPT), sometimes referred to as artificial muscles, are known to generate a large bending strain and a moderate stress at low applied voltages (transducers. In this study, extensional IPTs are characterized under forced and free displacement boundary condition as a function of transducer architecture. The electrode thickness is varied from 10 μm up to 40 μm while three extensional actuators with Lithium, Cesium, and tetraethylammonium (TEA) mobile cations are characterized. Three fixtures are built in order to characterize the extensional actuation response. The first fixture measures the free displacement of an IPT sample sandwiched between two aluminum plates glued using the electrically conductive silver paste. In the second fixture a spring is compressed against the test sample with variable amounts to generate different levels of pre-stress and prevents the bending of the IPT. In the third fixture dead weights are placed on top of the sample in order to prevent bending. In the spring loaded fixture a thermocouple is placed in the proximity of the actuator and temperature is measured. The different transducers are characterized using a step voltage input and an alternating current (AC) sine wave input. The step input resulted in a logarithmic rise like displacement curve, while the low frequency (wave displacement response with a strong first harmonic. The high frequency AC excitation generated a response similar to that of the step input. Comparing the measured temperature for step and AC response demonstrated that the sample is heating up when exited with a high frequency signal; which is leading to the expansion of the sample. Initial experimental results demonstrate a strong correlation between electrode architecture and the peak strain response. Strains on the order of 2% are observed with air stable ionic liquid based transducers. A correlation between the strain and charge buildup in the polymer is also characterized. Cesium

  8. Optical atomic clocks

    CERN Document Server

    Poli, N; Gill, P; Tino, G M

    2014-01-01

    In the last ten years extraordinary results in time and frequency metrology have been demonstrated. Frequency-stabilization techniques for continuous-wave lasers and femto-second optical frequency combs have enabled a rapid development of frequency standards based on optical transitions in ultra-cold neutral atoms and trapped ions. As a result, today's best performing atomic clocks tick at an optical rate and allow scientists to perform high-resolution measurements with a precision approaching a few parts in $10^{18}$. This paper reviews the history and the state of the art in optical-clock research and addresses the implementation of optical clocks in a possible future redefinition of the SI second as well as in tests of fundamental physics.

  9. Rotary cup slurry atomization

    Science.gov (United States)

    Sommer, H. T.; Marnicio, R. J.

    1983-06-01

    The theory of a two-phase flow in a rotating cup atomizer is described. The analysis considers the separation of the solid and liquid media thus realistically modeling the flow of two layers along the inner cup wall: a slurry of increasing solids concentration and a supernatent liquid layer. The analysis is based on the earlier work of Hinze and Milborn (1950) which addressed the flow within a rotary cup for a homogeneous liquid. The superimposition of a settling velocity under conditions of high centrifugal acceleration permits the extended analysis of the separation of the two phases. Appropriate boundary conditions have been applied to the film's free surface and the cup wall and to match the flow characteristics at the liquid-slurry interface. The changing slurry viscosity, increasing nonlinearly with growing solid loading, was also considered. A parameter study illustrates the potential for a cup design to provide optimal slurry and liquid film thicknesses for effective atomization.

  10. Cavity enhanced atomic magnetometry

    CERN Document Server

    Crepaz, Herbert; Dumke, Rainer

    2015-01-01

    Atom sensing based on Faraday rotation is an indispensable method for precision measurements, universally suitable for both hot and cold atomic systems. Here we demonstrate an all-optical magnetometer where the optical cell for Faraday rotation spectroscopy is augmented with a low finesse cavity. Unlike in previous experiments, where specifically designed multipass cells had been employed, our scheme allows to use conventional, spherical vapour cells. Spherical shaped cells have the advantage that they can be effectively coated inside with a spin relaxation suppressing layer providing long spin coherence times without addition of a buffer gas. Cavity enhancement shows in an increase in optical polarization rotation and sensitivity compared to single-pass configurations.

  11. Cavity enhanced atomic magnetometry.

    Science.gov (United States)

    Crepaz, Herbert; Ley, Li Yuan; Dumke, Rainer

    2015-10-20

    Atom sensing based on Faraday rotation is an indispensable method for precision measurements, universally suitable for both hot and cold atomic systems. Here we demonstrate an all-optical magnetometer where the optical cell for Faraday rotation spectroscopy is augmented with a low finesse cavity. Unlike in previous experiments, where specifically designed multipass cells had been employed, our scheme allows to use conventional, spherical vapour cells. Spherical shaped cells have the advantage that they can be effectively coated inside with a spin relaxation suppressing layer providing long spin coherence times without addition of a buffer gas. Cavity enhancement shows in an increase in optical polarization rotation and sensitivity compared to single-pass configurations.

  12. Atomic emission spectroscopy

    Science.gov (United States)

    Andrew, K. H.

    1975-01-01

    The relationship between the Slater-Condon theory and the conditions within the atom as revealed by experimental data was investigated. The first spectrum of Si, Rb, Cl, Br, I, Ne, Ar, and Xe-136 and the second spectrum of As, Cu, and P were determined. Methods for assessing the phase stability of fringe counting interferometers and the design of an autoranging scanning system for digitizing the output of an infrared spectrometer and recording it on magnetic tape are described.

  13. Atom Interferometry Progress

    Science.gov (United States)

    1990-04-19

    Casher effect . RECENT PUBLICATION Atom Optics, David W. Keith and David E. Pritchard, New frontiers in QED and Quantumoptics, (Plenum Press, New York...frequencies (< 10 Hz) where the passive system is least effective . The reduction of relative motion provided by the active system will allow us to use much...experimental objective will probably be a demonstration of Berry’s phase with bosons. Another possibility would be an improved measurement of the Aharonov

  14. Artificial Rydberg atom

    Energy Technology Data Exchange (ETDEWEB)

    Joe, Yong S. [Center for Computational Nanoscience, Department of Physics and Astronomy, Ball State University, Muncie, IN 47306 (United States)], E-mail: ysjoe@bsu.edu; Mkrtchian, Vanik E. [Institute for Physical Research, Armenian Academy of Sciences, Ashtarak-2, 378410, Republic of Armenia (Armenia); Lee, Sun H. [Center for Computational Nanoscience, Department of Physics and Astronomy, Ball State University, Muncie, IN 47306 (United States)

    2009-03-02

    We analyze bound states of an electron in the field of a positively charged nanoshell. We find that the binding and excitation energies of the system decrease when the radius of the nanoshell increases. We also show that the ground and the first excited states of this system have remarkably the same properties of the highly excited Rydberg states of a hydrogen-like atom, i.e., a high sensitivity to the external perturbations and long radiative lifetimes.

  15. Strange exotic atoms

    Science.gov (United States)

    Friedman, E.

    1998-08-01

    Exotic atoms of K- and Σ- are analyzed using density-dependent optical potentials constrained by a low-density limit. Emphasis is placed on radial sensitivities of the real potential. A potential depth of 180MeV inside nuclei is confirmed for K-. For Σ- a shallow attractive potential outside the nuclear surface becomes repulsive in the interior. The information content of limited data sets is demonstrated.

  16. Atomic lighthouse effect.

    Science.gov (United States)

    Máximo, C E; Kaiser, R; Courteille, Ph W; Bachelard, R

    2014-11-01

    We investigate the deflection of light by a cold atomic cloud when the light-matter interaction is locally tuned via the Zeeman effect using magnetic field gradients. This "lighthouse" effect is strongest in the single-scattering regime, where deviation of the incident field is largest. For optically dense samples, the deviation is reduced by collective effects, as the increase in linewidth leads to a decrease in magnetic field efficiency.

  17. The Atomic Lighthouse Effect

    CERN Document Server

    Máximo, C E; Courteille, Ph W; Bachelard, R

    2014-01-01

    We investigate the deflection of light by a cold atomic cloud when the light-matter interaction is locally tuned via the Zeeman effect using magnetic field gradients. This "lighthouse" effect is strongest in the single-scattering regime, where deviation of the incident field is largest. For optically dense samples, the deviation is reduced by collective effects, as the increase in linewidth leads to a decrease of the magnetic field efficiency.

  18. Real and Hybrid Atomic Orbitals.

    Science.gov (United States)

    Cook, D. B.; Fowler, P. W.

    1981-01-01

    Demonstrates that the Schrodinger equation for the hydrogenlike atom separates in both spheroconal and prolate spheroidal coordinates and that these separations provide a sound theoretical basis for the real and hybrid atomic orbitals. (Author/SK)

  19. Into the atom and beyond

    CERN Multimedia

    1989-01-01

    Magnifying an atom to football pitch size. The dense nucleus, carrying almost all the atomic mass, is much smaller than the ball. The players (the electrons) would see something about the size of a marble!

  20. Investigation of implicit avoidance of displacement-related stimuli in offspring of trauma exposed, forcibly-displaced individuals.

    Science.gov (United States)

    Wittekind, Charlotte E; Muhtz, Christoph; Moritz, Steffen; Jelinek, Lena

    2017-02-03

    There is an ongoing debate as to whether traumatization also affects the close relatives of trauma survivors who have symptoms of PTSD. Although many studies provide evidence favoring a transgenerational transmission, other studies have not found evidence to support this idea. The present study examined whether adult offspring of individuals exposed to trauma during forced displacement with (n=22) and without PTSD (n=24) exhibit an implicit avoidance of stimuli related to the parental trauma compared to children of non-trauma exposed control participants (n=23) using an Approach-Avoidance task (AAT). Offspring participants were requested to push (i.e., avoidance) or pull (i.e., approach) displacement-related and neutral pictures, whereby response direction depended on a non-affective dimension (color of the pictures). Results suggest that the offspring of non-PTSD participants exhibit implicit avoidance of displacement-related stimuli. This rather unexpected finding might either indicate resilience amongst offspring of PTSD participants or that offspring of non-PTSD participants are particularly affected. If these results were to replicate, they suggest that implicit avoidance tendencies amongst the offspring of trauma exposed participants might partially contribute to their heightened PTSD vulnerability. Longitudinal studies are needed to elucidate whether implicit avoidance tendencies are associated with increased stress vulnerability.