WorldWideScience

Sample records for atmospheric aerosol particle

  1. Dispersion of aerosol particles in the atmosphere: Fukushima

    Science.gov (United States)

    Haszpra, Tímea; Lagzi, István; Tél, Tamás

    2013-04-01

    Investigation of dispersion and deposition of aerosol particles in the atmosphere is an essential issue, because they have an effect on the biosphere and atmosphere. Moreover, aerosol particles have different transport properties and chemical and physical transformations in the atmosphere compared to gas phase air pollutants. The motion of a particle is described by a set of ordinary differential equations. The large-scale dynamics in the horizontal direction can be described by the equations of passive scalar advection, but in the vertical direction a well-defined terminal velocity should be taken into account as a term added to the vertical wind component. In the planetary boundary layer turbulent diffusion has an important role in the particle dispersion, which is taken into account by adding stochastic terms to the deterministic equations above. Wet deposition is also an essential process in the lower levels of the atmosphere, however, its precise parameterization is a challenge. For the simulations the wind field and other necessary data were taken from the ECMWF ERA-Interim database. In the case of the Fukushima Daiichi nuclear disaster (March-April 2011) radioactive aerosol particles were also released in the planetary boundary layer. Simulations (included the continuous and varying emission from the nuclear power plant) will be presented for the period of 14-23 March. Results show that wet deposition also has to be taken into consideration in the lower levels of the atmosphere. Furthermore, dynamical system characteristics are evaluated for the aerosol particle dynamics. The escape rate of particles was estimated both with and without turbulent diffusion, and in both cases when there was no wet deposition and also when wet deposition was taken into consideration.

  2. Atmospheric aerosol particle analysis at the Debrecen Nuclear Microprobe

    International Nuclear Information System (INIS)

    Complete text of publication follows. Characterisation of atmospheric aerosol is in the focus of several national and international research programs due to their health impact and effects on the radiative balance of Earth. Bulk elemental analytical techniques, like macro-PIXE, are extensively used for analysing atmospheric aerosol. However more detailed and reliable data can be obtained if individual aerosol particles are analysed. Nuclear microscopy is a powerful tool which enables the quantitative determination of trace element distribution in complex samples with a sensitivity of μg/g on micrometer scale. In the frame of an OTKA and a Coordinated Research Project of the IAEA, an experimental setup based on the simultaneous use of different ion beam analytical techniques was developed at the Debrecen scanning nuclear microprobe facility, which enables the total quantitative analysis of microparticles. This measurement, data collection and evaluation setup was already applied successfully in various studies: (1) ion beam microanalysis of desert dust particles originating from Saharan dust intrusions, (2) characterization of urban aerosol sources by single particle analysis, (3) characterization of indoor aerosols. As an example, nuclear microprobe study of indoor aerosol particles containing toxic metals is presented. Aerosol samples were collected in the IBA Lab of ATOMKI in the frame of a laboratory practice for undergraduate students. At the same time mechanical repair work was carried out on the heating system in the corridor outside the Laboratory. In order to demonstrate the monitoring of air pollution for the students, aerosol samples were collected with a 2-stage filter unit on Nuclepore polycarbonate filters. The samples were analysed by bulk-PIXE. Concentration of Zn, Cd and Pb were found to be exceeding the national air quality limit. Therefore single particle analysis was carried out on the coarse mode samples to find out the origin of the toxic

  3. Nature and evolution of ultrafine aerosol particles in the atmosphere

    Science.gov (United States)

    Smirnov, V. V.

    2006-12-01

    Results of experimental and theoretical studies of a poorly understood phenomenon, an intense emission of ultrafine (nanometer) aerosols (ENA), are reviewed. In the English-language literature, this phenomenon is commonly referred to as a nucleation burst. ENA events have been observed on all the continents and throughout the depth of the troposphere, with the number of corresponding publications growing steadily. Intense and long-lasting ENA events have been studied more or less comprehensively and in full detail for Northern Europe, with 60 to 70% of observations taken in a forest area in the presence of snow cover and 10 to 20% in coastal marine areas. Most often, ENA events occur during spring and fall, with 95% of cases in the daytime and under sunny calm conditions, typical of anticyclones. In ENA events, the concentration of nanoparticles initially grows rapidly to values of 103-105 cm-3. One or two hours later, the so-called nuclei fraction with diameters D = 3-15 nm is produced. The appearance of the Aitken fraction D = 20-80 nm and the enlargement of aerosol particles inside the accumulation fraction D = 80-200 nm may occur during the following 4-6 h. Thus, the cycle of formation and growth of atmospheric aerosol particles in the size range from a few to hundreds of nanometers is reproduced over 6-8 h. A specific synoptic feature of ENA events over land is that they occur when the polar air is transported to measuring sites and the temperature difference between day and light is large. During ENA periods, the formation rate of condensation nuclei with a diameter of 100 nm increases 10-to 100-fold. Important factors of ENA genesis are the “aerosol” and “electric” states of the atmosphere. More intense ENA events occur at low concentrations of background aerosols in the presence of atmospheric ions of medium mobility with D = 2-3 nm. The international experiments ACE 1 and 2, BIOFOR 1, 2, and 3, ESUP 2000, QUEST, etc., have not yet provided any

  4. Inverse problem for particle size distributions of atmospheric aerosols using stochastic particle swarm optimization

    International Nuclear Information System (INIS)

    As a part of resolving optical properties in atmosphere radiative transfer calculations, this paper focuses on obtaining aerosol optical thicknesses (AOTs) in the visible and near infrared wave band through indirect method by gleaning the values of aerosol particle size distribution parameters. Although various inverse techniques have been applied to obtain values for these parameters, we choose a stochastic particle swarm optimization (SPSO) algorithm to perform an inverse calculation. Computational performances of different inverse methods are investigated and the influence of swarm size on the inverse problem of computation particles is examined. Next, computational efficiencies of various particle size distributions and the influences of the measured errors on computational accuracy are compared. Finally, we recover particle size distributions for atmospheric aerosols over Beijing using the measured AOT data (at wavelengths λ=0.400, 0.690, 0.870, and 1.020 μm) obtained from AERONET at different times and then calculate other AOT values for this band based on the inverse results. With calculations agreeing with measured data, the SPSO algorithm shows good practicability.

  5. Formation of highly porous aerosol particles by atmospheric freeze-drying in ice clouds.

    Science.gov (United States)

    Adler, Gabriela; Koop, Thomas; Haspel, Carynelisa; Taraniuk, Ilya; Moise, Tamar; Koren, Ilan; Heiblum, Reuven H; Rudich, Yinon

    2013-12-17

    The cycling of atmospheric aerosols through clouds can change their chemical and physical properties and thus modify how aerosols affect cloud microphysics and, subsequently, precipitation and climate. Current knowledge about aerosol processing by clouds is rather limited to chemical reactions within water droplets in warm low-altitude clouds. However, in cold high-altitude cirrus clouds and anvils of high convective clouds in the tropics and midlatitudes, humidified aerosols freeze to form ice, which upon exposure to subsaturation conditions with respect to ice can sublimate, leaving behind residual modified aerosols. This freeze-drying process can occur in various types of clouds. Here we simulate an atmospheric freeze-drying cycle of aerosols in laboratory experiments using proxies for atmospheric aerosols. We find that aerosols that contain organic material that undergo such a process can form highly porous aerosol particles with a larger diameter and a lower density than the initial homogeneous aerosol. We attribute this morphology change to phase separation upon freezing followed by a glass transition of the organic material that can preserve a porous structure after ice sublimation. A porous structure may explain the previously observed enhancement in ice nucleation efficiency of glassy organic particles. We find that highly porous aerosol particles scatter solar light less efficiently than nonporous aerosol particles. Using a combination of satellite and radiosonde data, we show that highly porous aerosol formation can readily occur in highly convective clouds, which are widespread in the tropics and midlatitudes. These observations may have implications for subsequent cloud formation cycles and aerosol albedo near cloud edges. PMID:24297908

  6. Nuclear microprobe analysis and source apportionment of individual atmospheric aerosol particles

    International Nuclear Information System (INIS)

    In atmospheric aerosol reserach, one key issue is to determine the sources of the airborne particles. Bulk PIXE analysis coupled with receptor modeling provides a useful, but limited view of the aerosol sources influencing one particular site or sample. The scanning nuclear microprobe (SNM) technique is a microanalytical technique that gives unique information on individual aerosol particles. In the SNM analyses a 1.0 μm size 2.4 MeV proton beam from the Oxford SNM was used. The trace elements with Z>11 were measured by the particle induced X-ray emission (PIXE) method with detection limits in the 1-10 ppm range. Carbon, nitrogen and oxygen are measured simultaneously using Rutherford backscattering spectrometry (RBS). Atmospheric aerosol particles were collected at the Brazilian Antarctic Station and at biomass burning sites in the Amazon basin tropical rain forest in Brazil. In the Antarctic samples, the sea-salt aerosol particles were clearly predominating, with NaCl and CaSO4 as major compounds with several trace elements as Al, Si, P, K, Mn, Fe, Ni, Cu, Zn, Br, Sr, and Pb. Factor analysis of the elemental data showed the presence of four components: 1) Soil dust particles; 2) NaCl particles; 3) CaSO4 with Sr; and 4) Br and Mg. Strontium, observed at 20-100 ppm levels, was always present in the CaSO4 particles. The hierarchical cluster procedure gave results similar to the ones obtained through factor analysis. For the tropical rain forest biomass burning aerosol emissions, biogenic particles with a high organic content dominate the particle population, while K, P, Ca, Mg, Zn, and Si are the dominant elements. Zinc at 10-200 ppm is present in biogenic particles rich in P and K. The quantitative aspects and excellent detection limits make SNM analysis of individual aerosol particles a very powerful analytical tool. (orig.)

  7. Elemental composition of aerosol particles from two atmospheric monitoring stations in the Amazon Basin

    International Nuclear Information System (INIS)

    One key region for the study of processes that are changing the composition of the global atmosphere is the Amazon Basin tropical rain forest. The high rate of deforestation and biomass burning is emitting large amounts of gases and fine-mode aerosol particles to the global atmosphere. Two background monitoring stations are operating continuously measuring aerosol composition, at Cuiaba, and Serra do Navio. Fine- and coarse-mode aerosol particles are being collected using stacked filter units. Particle induced X-ray emission (PIXE) was used to measure concentrations of up to 21 elements: Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br, Rb, Sr, Zr, and Pb. The elemental composition was measured at the new PIXE facility from the University of Sao Paulo, using a dedicated 5SDH tandem Pelletron nuclear accelerator. Absolute principal factor analysis (APFA) has derived absolute elemental source profiles. At the Serra do Navio sampling site a very clean background aerosol is being observed. Biogenic aerosol dominates the fine-mode mass concentration, with the presence of K, P, S, Cl, Zn, Br, and FPM. Three components dominate the aerosol composition: Soil dust particles, the natural biogenic release by the forest, and a marine aerosol component. At the Cuiaba site, during the dry season, a strong component of biomass burning is observed. An aerosol mass concentration up to 120 μg/m3 was measured. APFA showed three components: Soil dust (Al, Ca, Ti, Mn, Fe), biomass burning (soot, FPM, K, Cl) and natural biogenic particles (K, S, Ca, Mn, Zn). The fine-mode biogenic component of both sites shows remarkable similarities, although the two sampling sites are 3000 km apart. Several essential plant nutrients like P, K, S, Ca, Ni and others are transported in the atmosphere as a result of biomass burning processes. (orig.)

  8. Formation of highly porous aerosol particles by atmospheric freeze-drying in ice clouds

    Science.gov (United States)

    Rudich, Yinon; Adler, Gabriela; Koop, Thomas; Taraniuk, Ilya; Moise, Tamar; Koren, Ilan; Heiblum, Reuven; Haspel, Carynelisa

    2014-05-01

    In cold high altitude cirrus clouds and anvils of high convective clouds in the tropics and mid-latitudes, ice partciles that are exposed to subsaturation conditions with respect to ice can sublimate, leaving behind residual modified aerosols. This freeze-drying process can occur in various types of clouds. In this talk we will describe experiements that simulate the atmospheric freeze-drying cycle of aerosols. We find that aerosols with high organic content can form highly porous particles (HPA) with a larger diameter and a lower density than the initial homogenous aerosol following ice subliation. We attribute this morphology change to phase separation upon freezing followed by a glass transition of the organic material that can preserve a porous structure follwoing ice sublimation. We find that the highly porous aerosol scatter solar light less efficiently than non-porous aerosol particles. A porous structure may explain the previously observed enhancement in ice nucleation efficiency of glassy organic particles. These observations may have implications for subsequent cloud formation cycles and aerosol albedo near cloud edges.

  9. Source apportionment of single aerosol particles in the atmosphere of Shanghai city

    International Nuclear Information System (INIS)

    A nuclear microprobe with high spatial resolution and high analytical sensitivity was applied to analyze atmospheric aerosol at five monitoring sites in Shanghai city. Meantime, a new pattern recognition technique, which used the micro-PIXE spectrum of a single aerosol particle as its fingerprint, was developed to identify the origin of the particle. The results showed that the major contributors to the atmosphere pollution were soil dust (31.6%), building dust (30.8%), and the next were vehicle exhaust (13.7%), metallurgic industry excrements (5.6%), oil combustion (5%) and coal combustion (2.3%). Besides these, about 10% of the particles could not be identified. Based on the cluster analysis of these particles, they could be divided into soil dust, building dust and metallurgic industry excrements. Moreover, some new pollution sources from tyres and chemical plants were also revealed

  10. The interaction between air ions and aerosol particles in the atmosphere

    CERN Document Server

    Aplin, KL

    2012-01-01

    Charged particles are continually generated in atmospheric air, and the interaction between natural ionisation and atmospheric particles is complicated. It is of some climatic importance to establish if ions are implicated in particle formation. Atmospheric ion concentrations have been investigated here at high temporal resolution, using Gerdien ion analysers at a site where synchronous meteorological measurements were also made. The background ionisation rate was also monitored with a Geiger counter, enabling ion production from natural radioactivity to be distinguished from other effects. Measurements at 1Hz offer some promise in establishing the atmospheric electrical influences in ionic nucleation bursts, although combinations of other meteorological factors are also known to be significant. High time resolution meteorological and ion measurements are therefore clearly necessary in advancing basic understanding in the behaviour of atmospheric aerosol.

  11. Nucleation of atmospheric particles

    OpenAIRE

    Curtius J

    2009-01-01

    Two types of particles exist in the atmosphere, primary and secondary particles. While primary particles such as soot, mineral dust, sea salt particles or pollen are introduced directly as particles into the atmosphere, secondary particles are formed in the atmosphere by condensation of gases. The formation of such new aerosol particles takes place frequently and at a broad variety of atmospheric conditions and geographic locations. A considerable fraction of the atmospheric particles is form...

  12. Lung cancer mortality and exposure to atmospheric aerosol particles in Guangzhou, China

    Science.gov (United States)

    Tie, Xuexi; Wu, Dui; Brasseur, Guy

    In recent years, China and other emerging countries have been experiencing severe air pollution problems with high concentrations of atmospheric aerosol particles. Satellite measurements indicate that the aerosol loading of the atmosphere in highly populated regions of China is about 10 times higher than, for example, in Europe and in the Eastern United States. The exposure to extremely high aerosol concentrations might lead to important human health effects, including respiratory and cardiovascular diseases as well as lung cancers. Here, we analyze 52-year historical surface measurements of haze data in the Chinese city of Guangzhou, and show that the dramatic increase in the occurrence of air pollution events between 1954 and 2006 has been followed by a large enhancement in the incidence of lung cancer.

  13. A method for the direct measurement of surface tension of atmospherically relevant aerosol particles using atomic force microscopy

    OpenAIRE

    Hritz, A. D.; Raymond, T. M.; Dutcher, D. D.

    2016-01-01

    Accurate estimates of particle surface tension are required for models concerning atmospheric aerosol nucleation and activation. However, it is difficult to collect sufficiently large volumes of atmospheric aerosol for use in typical instruments that measure surface tension, such as goniometers or Wilhelmy plates. In this work, a method that measures the surface tension of collected liquid nanoparticles using atomic force microscopy is presented. A...

  14. The generation of diesel exhaust particle aerosols from a bulk source in an aerodynamic size range similar to atmospheric particles

    Directory of Open Access Journals (Sweden)

    Daniel J Cooney

    2008-08-01

    Full Text Available Daniel J Cooney1, Anthony J Hickey21Department of Biomedical Engineering; 2School of Pharmacy, University of North Carolina, Chapel Hill, NC, USAAbstract: The influence of diesel exhaust particles (DEP on the lungs and heart is currently a topic of great interest in inhalation toxicology. Epidemiological data and animal studies have implicated airborne particulate matter and DEP in increased morbidity and mortality due to a number of cardiopulmonary diseases including asthma, chronic obstructive pulmonary disorder, and lung cancer. The pathogeneses of these diseases are being studied using animal models and cell culture techniques. Real-time exposures to freshly combusted diesel fuel are complex and require significant infrastructure including engine operations, dilution air, and monitoring and control of gases. A method of generating DEP aerosols from a bulk source in an aerodynamic size range similar to atmospheric DEP would be a desirable and useful alternative. Metered dose inhaler technology was adopted to generate aerosols from suspensions of DEP in the propellant hydrofluoroalkane 134a. Inertial impaction data indicated that the particle size distributions of the generated aerosols were trimodal, with count median aerodynamic diameters less than 100 nm. Scanning electron microscopy of deposited particles showed tightly aggregated particles, as would be expected from an evaporative process. Chemical analysis indicated that there were no major changes in the mass proportion of 2 specific aromatic hydrocarbons (benzo[a]pyrene and benzo[k]fluoranthene in the particles resulting from the aerosolization process.Keywords: diesel exhaust particles, aerosol, inhalation toxicology

  15. Aerosol and Cloud-Nucleating Particle Observations during an Atmospheric River Event

    Science.gov (United States)

    DeMott, P. J.; McCluskey, C. S.; Petters, M.; Suski, K. J.; Levin, E. J.; Hill, T. C. J.; Atwood, S. A.; Schill, G. P.; Rocci, K.; Boose, Y.; Martin, A.; Cornwell, G.; Al-Mashat, H.; Moore, K.; Prather, K. A.; Rothfuss, N.; Taylor, H.; Leung, L. R.; Tomlinson, J. M.; Mei, F.; Hubbe, J. M.; Rosenfeld, D.; Spackman, J. R.; Fairall, C. W.; Creamean, J.; White, A. B.; Kreidenweis, S. M.

    2015-12-01

    The multi-agency CalWater 2015 project occurred over North Central CA and the Eastern Pacific during January to March 2015 (Spackman et al., this session). The goals of the campaign were to document the structure of atmospheric rivers (ARs) that deliver much of the water vapor associated with major winter storms along the U.S. West Coast and to investigate the modulating effect of aerosols on precipitation. Aerosol sources that may influence orographic cloud properties for air lifted over the mountains in California in winter include pollution, biomass burning, soil dusts and marine aerosols, but their roles will also be influenced by transport, vertical stratification, and scavenging processes. We present results from a comprehensive study of aerosol distributions, compositions, and cloud nucleating properties during an intense winter storm during February 2015, including data from an NSF-supported measurement site at Bodega Bay, from the DOE-ARM Cloud Aerosol Precipitation Experiment that included sampling on the NOAA RV Ron Brown offshore and the G-1 aircraft over ocean and land, and with context provided by other NOAA aircraft and remote sensing facilities. With a special focus on the coastal site, we discuss changes in aerosol distributions, aerosol hygroscopicity, and number concentrations of fluorescent particles, cloud condensation nuclei (CCN), and ice nucleating particles (INPs) during the AR event. We compare with periods preceding and following the event. For example, total aerosol number and surface area concentrations at below 0.5 μm diameter decreased from typical values of a few thousand cm-3 and 100 μm2 cm-3, respectively, to a few hundred cm-3 and 10 μm2cm-3 at Bodega Bay during the AR event. CCN concentrations were similarly lower, but hygroscopicity parameter (kappa) increased from typical values of 0.2 to values > 0.5 during the AR.INP and fluorescent particle number concentrations were generally lower during the AR event than at any other

  16. Source apportionment of single aerosol particles in the atmosphere of Shanghai city

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A nuclear microprobe with high spatial resolution and high analyti cal sensitivity was applied to analyze atmospheric aerosol at five monitoring sites in Shanghai city. Meantime, a new pattern recognition technique, which used the micro PIXE spectrum of a single aerosol particle as its fingerprint, was developed to identify the origin of the particle. The results showed that the major contributors to the at mosphere pollution were soil dust (31.6%), building dust (30.8%), and the next were vehicle exhaust (13.7%), metallurgic industry excrements (5.6%), oil combustion (5%) and coal combustion (2.3%). Besides these, about 10% of the particles could not be identified. Based on the cluster analysis of these particles, they could be divided into eight groups. By inference, they might belong to some sub-pollution sources from soil dust, building dust and metallurgic industry excrements. Moreover, some new pollution sources from tyres and chemical plants were also revealed.

  17. Mixing state of particles with secondary species by single particle aerosol mass spectrometer in an atmospheric pollution event

    Science.gov (United States)

    Xu, Lingling; Chen, Jinsheng

    2016-04-01

    Single particle aerosol mass spectrometer (SPAMS) was used to characterize size distribution, chemical composition, and mixing state of particles in an atmospheric pollution event during 20 Oct. - 5 Nov., 2015 in Xiamen, Southeast China. A total of 533,012 particle mass spectra were obtained and clustered into six groups, comprising of industry metal (4.5%), dust particles (2.6%), carbonaceous species (70.7%), K-Rich particles (20.7%), seasalt (0.6%) and other particles (0.9%). Carbonaceous species were further divided into EC (70.6%), OC (28.5%), and mixed ECOC (0.9%). There were 61.7%, 58.3%, 4.0%, and 14.6% of particles internally mixed with sulfate, nitrate, ammonium and C2H3O, respectively, indicating that these particles had undergone significant aging processing. Sulfate was preferentially mixed with carbonaceous particles, while nitrate tended to mix with metal-containing and dust particles. Compared to clear days, the fractions of EC-, metal- and dust particles remarkably increased, while the fraction of OC-containing particles decreased in pollution days. The mixing state of particles, excepted for OC-containing particles with secondary species was much stronger in pollution days than that in clear days, which revealed the significant influence of secondary particles in atmospheric pollution. The different activity of OC-containing particles might be related to their much smaller aerodynamic diameter. These results could improve our understanding of aerosol characteristics and could be helpful to further investigate the atmospheric process of particles.

  18. Approximation for the absorption coefficient of airborne atmospheric aerosol particles in terms of measurable bulk properties

    OpenAIRE

    HÄNEL, GOTTFRIED; Dlugi, Ralph

    2011-01-01

    The absorption coefficient of airborne atmospheric aerosol particles can be approximated by where λ is the wavelength of radiation, n — ik is the mean complex refractive index, ρ the mean bulk density, and M/Vk the mass of the particles per unit volume of air. This approximation gives good results at relative humidities between 0 and 0.95 for the wavelengths of radiation between 0.55 μm and 2.0 μm and between 9.25 μm and 12.0 μm. Basing on this approximation it is possible to determine the s...

  19. Effect of typhoon on atmospheric aerosol particle pollutants accumulation over Xiamen, China.

    Science.gov (United States)

    Yan, Jinpei; Chen, Liqi; Lin, Qi; Zhao, Shuhui; Zhang, Miming

    2016-09-01

    Great influence of typhoon on air quality has been confirmed, however, rare data especially high time resolved aerosol particle data could be used to establish the behavior of typhoon on air pollution. A single particle aerosol spectrometer (SPAMS) was employed to characterize the particles with particle number count in high time resolution for two typhoons of Soulik (2013) and Soudelor (2015) with similar tracks. Three periods with five events were classified during the whole observation time, including pre - typhoon (event 1 and event 2), typhoon (event 3 and event 4) and post - typhoon (event 5) based on the meteorological parameters and particle pollutant properties. First pollutant group appeared during pre-typhoon (event 2) with high relative contributions of V - Ni rich particles. Pollution from the ship emissions and accumulated by local processes with stagnant meteorological atmosphere dominated the formation of the pollutant group before typhoon. The second pollutant group was present during typhoon (event 3), while typhoon began to change the local wind direction and increase wind speed. Particle number count reached up to the maximum value. High relative contributions of V - Ni rich and dust particles with low value of NO3(-)/SO4(2-) was observed during this period, indicating that the pollutant group was governed by the combined effect of local pollutant emissions and long-term transports. The analysis of this study sheds a deep insight into understand the relationship between the air pollution and typhoon. PMID:27295441

  20. Sub-micron atmospheric aerosols in the surroundings of Marseille and Athens: physical characterization and new particle formation

    OpenAIRE

    Petäjä, T.; Kerminen, V. -M.; Maso, M; Junninen, H.; I. K. Koponen; Hussein, T.; Aalto, P. P.; Andronopoulos, S.; Robin, D.; Hämeri, K.; Bartzis, J. G.; Kulmala, M.

    2007-01-01

    The properties of atmospheric aerosol particles in Marseille and Athens were investigated. The studies were performed in Marseille, France, during July 2002 and in Athens, Greece, during June 2003. The aerosol size distribution and the formation and growth rates of newly formed particles were characterized using Differential Mobility Particle Sizers. Hygroscopic properties were observed using a Hygroscopic Tandem Differential Mobility Analyzer setup. During both campaigns, t...

  1. A new method for assessing the contribution of Primary Biological Atmospheric Particles to the mass concentration of the atmospheric aerosol.

    Science.gov (United States)

    Perrino, Cinzia; Marcovecchio, Francesca

    2016-02-01

    Primary Biologic Atmospheric Particles (PBAPs) constitute an interesting and poorly investigated component of the atmospheric aerosol. We have developed and validated a method for evaluating the contribution of overall PBAPs to the mass concentration of atmospheric particulate matter (PM). The method is based on PM sampling on polycarbonate filters, staining of the collected particles with propidium iodide, observation at epifluorescence microscope and calculation of the bioaerosol mass using a digital image analysis software. The method has been also adapted to the observation and quantification of size-segregated aerosol samples collected by multi-stage impactors. Each step of the procedure has been individually validated. The relative repeatability of the method, calculated on 10 pairs of atmospheric PM samples collected side-by-side, was 16%. The method has been applied to real atmospheric samples collected in the vicinity of Rome, Italy. Size distribution measurements revealed that PBAPs was mainly in the coarse fraction of PM, with maxima in the range 5.6-10 μm. 24-h samples collected during different period of the year have shown that the concentration of bioaerosol was in the range 0.18-5.3 μg m(-3) (N=20), with a contribution to the organic matter in PM10 in the range 0.5-31% and to the total mass concentration of PM10 in the range 0.3-18%. The possibility to determine the concentration of total PBAPs in PM opens up interesting perspectives in terms of studying the health effects of these components and of increasing our knowledge about the composition of the organic fraction of the atmospheric aerosol. PMID:26680730

  2. Origin of nitrocatechols and alkylated-nitrocatechols in atmospheric aerosol particles

    Science.gov (United States)

    Marchand, Nicolas; Sylvestre, Alexandre; Ravier, Sylvain; Detournay, Anais; Bruns, Emily; Temime-Roussel, Brice; Slowik, Jay; El Haddad, Imad; Prevot, Andre

    2013-04-01

    Biomass burning constitutes one of the major sources of aerosol particles in most of the environments during winter. If a lot of information is available in the literature on the primary fraction of biomass burning aerosol particles, almost nothing is known regarding the formation of Secondary Organic Aerosol (SOA) from the chemical mixture emitted by this source. Recently methylated nitrocatechol have been identified in atmospheric particles collected in winter. These compounds are strongly associated with biomass burning tracers such as levoglucosan and are suspected to be of secondary origin since they can be formed through the oxidation of cresol significantly emitted by biomass burning. However, nitrocatechols are particularly difficult to analyze using classical techniques like HPLC-MS or GC-MS. In the present study, we adopt a new analytical approach. Direct analysis in real time (DART), introduced by Cody et al. (2005), allows direct analysis of gases, liquids, solids and materials on surfaces. Thus, for particles collected onto filters, the sample preparation step is simplified as much as possible, avoiding losses and reducing to the minimum the analytical procedure time. Two analytic modes can be used. In positive mode, [MH]+ ions are formed by proton transfer reaction ; whereas in negative ionization mode, [MH]-, M- and [MO2]- ions are formed. DART source enables soft ionization and produces simple mass spectra suitable for analysis of complex matrices, like organic aerosol, in only a few seconds. For this study, the DART source was coupled to a Q-ToF mass spectrometer (Synapt G2 HDMS, Waters), with a mass resolution up to 40 000. The analysis of atmospheric aerosol samples, collected in Marseille during winter 2011 (APICE project), with the DART/Q-ToF approach highlighted the abundance of nitrocatechols and alkylated nitrocatechols. Their temporal trends were also very similar to those of levoglucosan or dihydroabietic acid well known tracers of biomass

  3. Dispersion of aerosol particles in the free atmosphere using ensemble forecasts

    Directory of Open Access Journals (Sweden)

    T. Haszpra

    2013-10-01

    Full Text Available The dispersion of aerosol particle pollutants is studied using 50 members of an ensemble forecast in the example of a hypothetical free atmospheric emission above Fukushima over a period of 2.5 days. Considerable differences are found among the dispersion predictions of the different ensemble members, as well as between the ensemble mean and the deterministic result at the end of the observation period. The variance is found to decrease with the particle size. The geographical area where a threshold concentration is exceeded in at least one ensemble member expands to a 5–10 times larger region than the area from the deterministic forecast, both for air column "concentration" and in the "deposition" field. We demonstrate that the root-mean-square distance of any particle from its own clones in the ensemble members can reach values on the order of one thousand kilometers. Even the centers of mass of the particle cloud of the ensemble members deviate considerably from that obtained by the deterministic forecast. All these indicate that an investigation of the dispersion of aerosol particles in the spirit of ensemble forecast contains useful hints for the improvement of risk assessment.

  4. Insitu measurements of laser-induced-fluorescence spectra of single atmospheric organic carbon aerosol particles for their partial classification. (Invited)

    Science.gov (United States)

    Pinnick, R. G.; Pan, Y.; Hill, S.; Rosen, J. M.; Chang, R. K.

    2009-12-01

    Aerosols are ubiquitous in the earth’s atmosphere. Within the last two decades, the importance of organic carbon aerosols (OCAs) has been widely recognized. OCAs have both natural and anthropogenic sources and have effects ranging from atmospheric radiative forcing to human health. Improved methods for measuring and classifying OCAs are needed for better understanding their sources, transformation, and fate. In this talk we focus on the use of a relatively new technique for characterization of single OCA particles in atmospheric aerosol: ultraviolet laser-induced-fluorescence (UV-LIF). UV-LIF spectra of atmospheric aerosols measured at multiple sites with different regional climate (Adelphi, MD, New Haven, CT, and Las Cruces, NM) are reported. A hierarchical clustering method was used to cluster (approximately 90%) of the single-particle UV-LIF spectra into 8-10 groups (clusters). Some of these clusters have spectra that are similar to spectra of some important classes of atmospheric aerosol, such as humic/fulvic acids and humic-like substances, bacteria, cellulose, marine aerosol, and polycyclic aromatic hydrocarbons. The most highly populated clusters, and some of the less populated ones, appear at all sites. On average, spectra characteristic of humic/fulvic acids and humic-like-substances (HULIS) comprise 28-43% of fluorescent particles at all three sites; whereas cellulose-like spectra contribute only 1-3%.

  5. Characterization of Atmospheric Aerosol Particles from a Mining City in Southwest China Using Electron Probe microanalysis

    Science.gov (United States)

    Cheng, X.; Huang, Y.; Lu, H., III; Liu, Z., IV; Wang, N. V.

    2015-12-01

    Xin Cheng1, Yi Huang1*, Huilin Lu2, Zaidong Liu2, Ningming Wang21 Key Laboratory of Geological Nuclear Technology of Sichuan Province, College of Earth Science, Chengdu University of Technology, Chengdu 610059, China. ; E-mail:chengxin_cdut@163.com 2 College of Earth Science, Chengdu University of Technology, Chengdu 610059, China. ; *Corresponding author: E-mail: huangyi@cdut.cn Panzhihua is a mining city located at Pan-Xi Rift valley, southwest China. It has a long industrial history of vanadium-titanium magnetite mining, iron and steel smelting, and coal-fired power plants. Atomospheric environment has been seriously contaminated with airborne paticles, which is threatening human health.The harmful effects of aerosols are dependent on certain characteristics such as microphysical properties. However, few studsies have been carried out on morphological information contained on single atmospheric particles in this area. In this study, we provide a detailed morphologically and chemically characterization of airborne particles collected at Panzhihua city in October, 2014, using a quantitative single particle analysis based on EPXMA. The results indicate that based on their chemical composition, five major types of particles were identified. Among these, aluminosilicate particles have typical spherical shapes and are produced during the high-temperature combustion; Fe-containing particles contains high level of Mn, and more likely originated from mineralogical and steel industry; Si-containing particles can originate from mineralogical source; V-Ti-Mn-containing particles are also produced by steel industry; Ca-containing particles,these particles are CaCO3, mainly from the mining of limestone mine. The results help us on tracing and partitioning different sources of atomospheric particles in the industrial area. Fig.1 Fe-rich shperical particles

  6. Characterization of individual atmospheric aerosol particles with SIMS and laser-SNMS

    Science.gov (United States)

    Peterson, R. E.; Nair, A.; Dambach, S.; Arlinghaus, H. F.; Tyler, B. J.

    2006-07-01

    The surface chemistry of atmospheric aerosol particles is important in determining how these particles will effect human health, visibility, climate and precipitation chemistry. In previous work, it has been shown that ToF-SIMS can provide significant valuable information on both organic and inorganic constituents of the aerosol. It has been found, however, that ToF-SIMS with a Ga + primary ion beam offers very low sensitivity to poly-aromatic hydrocarbons (PAHs) and heavy metals, two important classes of pollutants. In this work the utility of laser-SNMS for detection of these pollutants has been explored. Two laser systems, a 193 nm excimer laser and a 157 nm excimer laser have been utilized. Each approach has advantages. ToF-SIMS has the highest sensitivity to alkali metals and aliphatic hydrocarbons. The 193 nm laser provides very high sensitivity to lead and other metals. The 157 nm laser greatly enhances sensitivity to PAHs which has enabled detection of PAHs on the surface of individual particles.

  7. Characterization of individual atmospheric aerosol particles with SIMS and laser-SNMS

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, R.E. [Department of Chemical Engineering, 50 S Central Campus Dr. Rm. 3290, University of Utah, Salt Lake City, UT 84112-9203 (United States); Nair, A. [Department of Chemical Engineering, 50 S Central Campus Dr. Rm. 3290, University of Utah, Salt Lake City, UT 84112-9203 (United States); Dambach, S. [Physikalisches Institute der Universitaet Muenster, Wilhelm-Klemm-Strasse 10, 48149 Muenster (Germany); Arlinghaus, H.F. [Physikalisches Institute der Universitaet Muenster, Wilhelm-Klemm-Strasse 10, 48149 Muenster (Germany); Tyler, B.J. [Department of Chemical Engineering, 50 S Central Campus Dr. Rm. 3290, University of Utah, Salt Lake City, UT 84112-9203 (United States)]. E-mail: bonniet@eng.utah.edu

    2006-07-30

    The surface chemistry of atmospheric aerosol particles is important in determining how these particles will effect human health, visibility, climate and precipitation chemistry. In previous work, it has been shown that ToF-SIMS can provide significant valuable information on both organic and inorganic constituents of the aerosol. It has been found, however, that ToF-SIMS with a Ga{sup +} primary ion beam offers very low sensitivity to poly-aromatic hydrocarbons (PAHs) and heavy metals, two important classes of pollutants. In this work the utility of laser-SNMS for detection of these pollutants has been explored. Two laser systems, a 193 nm excimer laser and a 157 nm excimer laser have been utilized. Each approach has advantages. ToF-SIMS has the highest sensitivity to alkali metals and aliphatic hydrocarbons. The 193 nm laser provides very high sensitivity to lead and other metals. The 157 nm laser greatly enhances sensitivity to PAHs which has enabled detection of PAHs on the surface of individual particles.

  8. A preliminary analysis of the surface chemistry of atmospheric aerosol particles in a typical urban area of Beijing.

    Science.gov (United States)

    Zhang, Zhengzheng; Li, Hong; Liu, Hongyan; Ni, Runxiang; Li, Jinjuan; Deng, Liqun; Lu, Defeng; Cheng, Xueli; Duan, Pengli; Li, Wenjun

    2016-09-01

    Atmospheric aerosol particle samples were collected using an Ambient Eight Stage (Non-Viable) Cascade Impactor Sampler in a typical urban area of Beijing from 27th Sep. to 5th Oct., 2009. The surface chemistry of these aerosol particles was analyzed using Static Time of Flight-Secondary Ion Mass Spectrometry (Static TOF-SIMS). The factors influencing surface compositions were evaluated in conjunction with the air pollution levels, meteorological factors, and air mass transport for the sampling period. The results show that a variety of organic ion groups and inorganic ions/ion groups were accumulated on the surfaces of aerosol particles in urban areas of Beijing; and hydrophobic organic compounds with short- or middle-chain alkyl as well as hydrophilic secondary inorganic compounds were observed. All these compounds have the potential to affect the atmospheric behavior of urban aerosol particles. PM1.1-2.1 and PM3.3-4.7 had similar elements on their surfaces, but some molecules and ionic groups demonstrated differences in Time of Flight-Secondary Ion Mass Spectrometry spectra. This suggests that the quantities of elements varied between PM1.1-2.1 and PM3.3-4.7. In particular, more intense research efforts into fluoride pollution are required, because the fluorides on aerosol surfaces have the potential to harm human health. The levels of air pollution had the most significant influence on the surface compositions of aerosol particles in our study. Hence, heavier air pollution was associated with more complex surface compositions on aerosol particles. In addition, wind, rainfall, and air masses from the south also greatly influenced the surface compositions of these urban aerosol particles. PMID:27593274

  9. Interactions of mineral dust with pollution and clouds: An individual-particle TEM study of atmospheric aerosol from Saudi Arabia

    Science.gov (United States)

    Pósfai, Mihály; Axisa, Duncan; Tompa, Éva; Freney, Evelyn; Bruintjes, Roelof; Buseck, Peter R.

    2013-03-01

    Aerosol particles from desert dust interact with clouds and influence climate on regional and global scales. The Riyadh (Saudi Arabia) aerosol campaign was initiated to study the effects of dust particles on cloud droplet nucleation and cloud properties. Here we report the results of individual-particle studies of samples that were collected from an aircraft in April 2007. We used analytical transmission electron microscopy, including energy-dispersive X-ray spectrometry, electron diffraction, and imaging techniques for the morphological, chemical, and structural characterization of the particles. Dust storms and regional background conditions were encountered during four days of sampling. Under dusty conditions, the coarse (supermicrometer) fraction resembles freshly crushed rock. The particles are almost exclusively mineral dust grains and include common rock-forming minerals, among which clay minerals, particularly smectites, are most abundant. Unaltered calcite grains also occur, indicating no significant atmospheric processing. The particles have no visible coatings but some contain traces of sulfur. The fine (submicrometer) fraction is dominated by particles of anthropogenic origin, primarily ammonium sulfate (with variable organic coating and some with soot inclusions) and combustion-derived particles (mostly soot). In addition, submicrometer, iron-bearing clay particles also occur, many of which are internally mixed with ammonium sulfate, soot, or both. We studied the relationships between the properties of the aerosol and the droplet microphysics of cumulus clouds that formed above the aerosol layer. Under dusty conditions, when a large concentration of coarse-fraction mineral particles was in the aerosol, cloud drop concentrations were lower and droplet diameters larger than under regional background conditions, when the aerosol was dominated by submicrometer sulfate particles.

  10. Atmospheric Aerosols in Suburb of Prague: The Dynamics of Particle Size Distributions

    Czech Academy of Sciences Publication Activity Database

    Řimnáčová, Daniela; Ždímal, Vladimír; Schwarz, Jaroslav; Smolík, Jiří; Řimnáč, Martin

    2011-01-01

    Roč. 101, č. 3 (2011), s. 539-552. ISSN 0169-8095 Grant ostatní: MF NF(CZ) CZ0049 Institutional research plan: CEZ:AV0Z40720504; CEZ:AV0Z10300504 Keywords : atmospheric aerosols * atmospheric nucleation * part size distribution Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.911, year: 2011

  11. Size distribution of natural aerosols and radioactive particles issued from radon, in marine and hardly polluted urban atmospheres

    International Nuclear Information System (INIS)

    With a view to studying the natural radioactive particles produced by atttachment of 222Rn daughters on environmental aerosol particles, the behaviours of CASELLA MK2 and ANDERSEN cascade impactors were first investigated. Their characteristic stage diameters were determined and size distributions of airborne particles were obtained in various situations. Moreover, an experimental and automatic equipment for measuring radon was devised and a method was developed in order to evaluate RaA, RaB, RaC concentrations in the free atmosphere. A degree of radioactive desequilibrium between 222Rn and its daughters, more important than that in other locations was thus demonstrated. Furthermore, by means of various aerosol collection systems (ion tubes, diffusion batteries, cascade impactors, filters), the cumulative size distribution of natural radioactivity was established in the air, at ground level. Finally, from a theory of attachment of small radioactive ions on atmospheric particles, a tentative explanation of experimental results was made

  12. Direct observation of aerosol particles in aged agricultural biomass burning plumes impacting urban atmospheres

    Directory of Open Access Journals (Sweden)

    W. Y. Li

    2010-04-01

    Full Text Available Emissions from agricultural biomass burning (ABB in northern China have a significant impact on the regional and the global climate. According to the Giovanni's Aerosol optical depth (AOD map, the monthly average AOD at 550 nm in northern China in 2007 shows a maximum value of 0.7 in June, suggesting that episodes of severe aerosol pollution occurred in this region. Aerosol particles were collected in urban Beijing during regional brown hazes from 12 to 30 June, 2007. Transmission electron microscopy with energy-dispersive X-ray spectrometry characterized the morphology, composition, and mixing state of aerosol particles. Potassium salts (K2SO4 and KNO3, ammonium sulfate, soot, and organic particles predominated in fine particles (diameter <1 μm collected from 12 to 20 June, 2007. In contrast, from 21 to 30 June, 2007, ammonium sulfate, soot, and organic particles were dominant. Potassium-dominant particles as a tracer of biomass burning, together with wildfire maps, show that intensive regional ABB in northern China from 10 to 20 June, 2007 contributed significantly to the regional haze. After long-range transport, ABB particles exhibited marked changes in their morphology, elemental composition, and mixing state. Heterogeneous reactions completely converted KCl particles from ABB into K2SO4 and KNO3. Soot particles were generally mixed with potassium salts, ammonium salts, and organic particles. In addition, the abundant aged organic particles and soluble salts emitted by ABB become more hygroscopic and increase their size during long-range transport, becoming in effect additional cloud condensation nuclei. The high AOD (average value at 2.2 during 12 to 20 June, 2007, in Beijing is partly explained by the hygroscopic growth of aged fine aerosol particles and by the strong absorption of internally mixed soot particles, both coming from regional ABB emissions.

  13. Production, growth and properties of ultrafine atmospheric aerosol particles in an urban environment

    Directory of Open Access Journals (Sweden)

    I. Salma

    2010-06-01

    Full Text Available Number concentrations of atmospheric aerosol particles were measured by a flow-switching type differential mobility particle sizer in an electrical mobility diameter range of 6–1000 nm in 30 channels near central Budapest with a time resolution of 10 min continuously from 3 November 2008 to 2 November 2009. Daily median number concentrations of particles varied from 3.8×103 to 29×103 cm−3 with a yearly median of 11.8×103 cm−3. Contribution of ultrafine particles to the total particle number ranged from 58 to 92% with a mean ratio and standard deviation of (79±6%. Daily average number concentrations in various size fractions and contribution of ultrafine particles to the total particle number showed no seasonal dependency. Monthly mean number size distributions were similar to each other. Overall mean for the number median mobility diameter of the Aitken and accumulation modes were 26 and 93 nm, respectively, which are substantially smaller than for rural or background environments. The Aitken and accumulation modes contributed similarly to the total particle number concentrations at the actual measurement location. Median diameters of the Aitken and accumulation modes were shifted to larger values before nucleation started and over the growth process, which can be related to the presence of aged aerosol under the conditions that favour nucleation and growth. Particle concentrations were usually increased substantially after nucleations. Overall mean and standard deviation of the nucleation mode number concentrations were (10.4±2.8×103 cm−3. Mean ratio and standard deviation of the nucleation mode number concentration to the total particle number concentration that was averaged for two hours just before the formation was detected was 2.3±1.1. Nucleation unambiguously occurred on 83 days, which represent 27% of all relevant days. Its frequency showed a

  14. Production, growth and properties of ultrafine atmospheric aerosol particles in an urban environment

    Directory of Open Access Journals (Sweden)

    I. Salma

    2011-02-01

    Full Text Available Number concentrations of atmospheric aerosol particles were measured by a flow-switching type differential mobility particle sizer in an electrical mobility diameter range of 6–1000 nm in 30 channels near central Budapest with a time resolution of 10 min continuously from 3 November 2008 to 2 November 2009. Daily median number concentrations of particles varied from 3.8 × 103 to 29 ×103 cm−3 with a yearly median of 11.8 × 103 cm−3. Contribution of ultrafine particles to the total particle number ranged from 58 to 92% with a mean ratio and standard deviation of (79 ± 6%. Typical diurnal variation of the particle number concentration was related to the major emission patterns in cities, new particle formation, sinks of particles and meteorology. Shapes of the monthly mean number size distributions were similar to each other. Overall mean for the number median mobility diameter of the Aitken and accumulation modes were 26 and 93 nm, respectively, which are substantially smaller than for rural or background environments. The Aitken and accumulation modes contributed similarly to the total particle number concentrations at the actual measurement location. New particle formation and growth unambiguously occurred on 83 days, which represent 27% of all relevant days. Hence, new particle formation and growth are not rare phenomena in Budapest. Their frequency showed an apparent seasonal variation with a minimum of 7.3% in winter and a maximum of 44% in spring. New particle formation events were linked to increased gas-phase H2SO4 concentrations. In the studied area, new particle formation is mainly affected by condensation sink and solar radiation. The formation process seems to be not sensitive to SO2, which was present in a yearly median concentration of 6.7 μg m−3. This suggests that the precursor gas was always available in excess

  15. Fluorescence from atmospheric aerosol detected by a lidar indicates biogenic particles in the lowermost stratosphere

    Directory of Open Access Journals (Sweden)

    F. Immler

    2005-01-01

    Full Text Available With a lidar system that was installed in Lindenberg/Germany, we observed in June 2003 an extended aerosol layer at 13km altitude in the lowermost stratosphere. This layer created an inelastic backscatter signal that we detected with a water vapour Raman channel, but that was not produced by Raman scattering. Also, we find evidence for inelastic scattering from a smoke plume from a forest fire that we observed in the troposphere. We interpret the unexpected properties of these aerosols as fluorescence induced by the laser beam at organic components of the aerosol particles. Fluorescence from ambient aerosol had not yet been considered detectable by lidar systems. However, organic compounds such as polycyclic aromatic hydrocarbons sticking to the aerosol particles, or bioaerosol such as bacteria, spores or pollen fluoresce when excited with UV-radiation in a way that is detectable by our lidar system. Therefore, we conclude that fluorescence from organic material released by biomass burning creates, inelastic backscatter signals that we measured with our instrument and thus demonstrate a new and powerful way to characterize aerosols by a remote sensing technique. The stratospheric aerosol layer that we have observed in Lindenberg for three consecutive days is likely to be a remnant from Siberian forest fire plumes lifted across the tropopause and transported around the globe.

  16. Quantification of environmentally persistent free radicals and reactive oxygen species in atmospheric aerosol particles

    OpenAIRE

    Arangio, Andrea M.; Tong, Haijie; Socorro, Joanna; Pöschl, Ulrich; Shiraiwa, Manabu

    2016-01-01

    Fine particulate matter plays a central role in adverse health effects of air pollution. Inhalation and deposition of aerosol particles in the respiratory tract can lead to the release of reactive oxygen species (ROS), which may cause oxidative stress. In this study, we have detected and quantified a wide range of particle-associated radicals using electron paramagnetic resonance (EPR) spectroscopy. Ambient particle samples were collected using a cascade impactor at a semi-urban site in centr...

  17. Fluorescence from atmospheric aerosol detected by a lidar indicates biogenic particles in the stratosphere

    Directory of Open Access Journals (Sweden)

    F. Immler

    2004-09-01

    Full Text Available With a lidar system that was installed in Lindenberg/Germany, we observed in June 2003, an extended aerosol layer at 13 km altitude in the lowermost stratosphere. This layer created an inelastic backscatter signal which we interpret as laser induced fluorescence from aerosol particles. Also, we find evidence for inelastic scattering in a smoke plume from a forest fire that we observed in the troposphere. Fluorescence from ambient aerosol had not yet been considered detectable by lidar. However, organic compounds such as polycyclic aromatic hydrocarbons sticking to the aerosol particles, or bioaerosol such as bacteria, spores or pollen fluoresce when excited with UV-radiation in a way that is detectable by our lidar system. Therefore, we conclude that fluorescence from organic material released by biomass burning creates the inelastic backscatter signal that we measured with our instrument and thus demonstrate a new and powerful way to characterize aerosols by a remote sensing technique. The stratospheric aerosol layer that we have observed in Lindenberg for three consecutive days is likely to be a remnant from Siberian forest fire plumes lifted across the tropopause and transported around the globe.

  18. Measurement and Analysis of Near Real Time Data on Particle Size Distribution in Atmospheric Aerosol

    Czech Academy of Sciences Publication Activity Database

    Wagner, Zdeněk; Fridrich, Miroslav; Schwarz, Jaroslav; Ždímal, Vladimír; Váňa, M.

    Catalogue : Zagreb Inventors Association, 2011, s. 130. [International Invention Show (silver medal awarded) /36./. Zagreb (HR), 09.11.2011-12.11.2011] Institutional research plan: CEZ:AV0Z40720504 Keywords : aerosol * near real time data * particle distribution Subject RIV: CF - Physical ; Theoretical Chemistry

  19. A method for the direct measurement of surface tension of collected atmospherically relevant aerosol particles using atomic force microscopy

    Science.gov (United States)

    Hritz, Andrew D.; Raymond, Timothy M.; Dutcher, Dabrina D.

    2016-08-01

    Accurate estimates of particle surface tension are required for models concerning atmospheric aerosol nucleation and activation. However, it is difficult to collect the volumes of atmospheric aerosol required by typical instruments that measure surface tension, such as goniometers or Wilhelmy plates. In this work, a method that measures, ex situ, the surface tension of collected liquid nanoparticles using atomic force microscopy is presented. A film of particles is collected via impaction and is probed using nanoneedle tips with the atomic force microscope. This micro-Wilhelmy method allows for direct measurements of the surface tension of small amounts of sample. This method was verified using liquids, whose surface tensions were known. Particles of ozone oxidized α-pinene, a well-characterized system, were then produced, collected, and analyzed using this method to demonstrate its applicability for liquid aerosol samples. It was determined that oxidized α-pinene particles formed in dry conditions have a surface tension similar to that of pure α-pinene, and oxidized α-pinene particles formed in more humid conditions have a surface tension that is significantly higher.

  20. Quantitative energy-dispersive electron probe X-ray microanalysis for single-particle analysis and its application for characterizing atmospheric aerosol particles

    Indian Academy of Sciences (India)

    Shila Maskey; Chul-Un Ro

    2011-02-01

    An energy-dispersive electron probe X-ray microanalysis (ED-EPMA) technique using an energy-dispersive X-ray detector with an ultra-thin window, designated as low-Z particle EPMA, has been developed. The low-Z particle EPMA allows the quantitative determination of concentrations of low-Z elements such as C, N and O, as well as higher-Z elements that can be analysed by conventional ED-EPMA. The quantitative determination of low-Z elements (using full Monte Carlo simulations, from the electron impact to the X-ray detection) in individual particles has improved the applicability of single-particle analysis, especially in atmospheric environmental aerosol research; many environmentally important atmospheric particles, e.g. sulphates, nitrates, ammonium and carbonaceous particles, contain low-Z elements. To demonstrate its practical applicability, the application of the low-Z particle EPMA for the characterization of Asian Dust, urban and subway aerosol particles is shown herein. In addition, it is demonstrated that the Monte Carlo calculation can also be applied in a quantitative single-particle analysis using transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectrometry (EDX), showing that the technique is useful and reliable for the characterization of submicron aerosol particles

  1. Hygroscopicity of aerosol particles and CCN activity of nearly hydrophobic particles in the urban atmosphere over Japan during summer

    Science.gov (United States)

    Ogawa, Shuhei; Setoguchi, Yoshitaka; Kawana, Kaori; Nakayama, Tomoki; Ikeda, Yuka; Sawada, Yuuki; Matsumi, Yutaka; Mochida, Michihiro

    2016-06-01

    We investigated the hygroscopicity of 150 nm particles and the number-size distributions and the cloud condensation nuclei (CCN) activity of nearly hydrophobic particles in aerosols over Nagoya, Japan, during summer. We analyzed the correlations between the number concentrations of particles in specific hygroscopic growth factor (g) ranges and the mass concentrations of chemical components. This analysis suggests the association of nearly hydrophobic particles with hydrocarbon-like organic aerosol, elemental carbon and semivolatile oxygenated organic aerosol (SV-OOA), that of less hygroscopic particles with SV-OOA and nitrate and that of more hygroscopic particles with low-volatile oxygenated organic aerosol (LV-OOA) and sulfate. The hygroscopicity parameter (κ) of organics was derived based on the g distributions and chemical composition of 150 nm particles. The κ of the organics correlated positively with the fraction of the total organic mass spectral signal at m/z 44 and the volume fraction of the LV-OOA to the organics, indicating that organics with highly oxygenated structures including carboxylic acid groups contribute to the water uptake. The number-size distributions of the nearly hydrophobic particles with g around 1.0 and 1.1 correlated with the mass concentrations of chemical components. The results show that the chemical composition of the particles with g around 1.0 was different between the Aitken mode and the accumulation mode size ranges. An analysis for a parameter Fmax of the curves fitted to the CCN efficiency spectra of the particles with g around 1.0 suggests that the coating by organics associated with SV-OOA elevated the CCN activity of these particles.

  2. Dissolution process of atmospheric aerosol particles into cloud droplets; Processus de dissolution des aerosols atmospheriques au sein des gouttes d'eau nuageuses

    Energy Technology Data Exchange (ETDEWEB)

    Desboeufs, K.

    2001-01-15

    Clouds affect both climate via the role they play in the Earth's radiation balance and tropospheric chemistry since they are efficient reaction media for chemical transformation of soluble species. Cloud droplets are formed in the atmosphere by condensation of water vapour onto aerosol particles, the cloud condensation nuclei (CCN). The water soluble fraction of these CCN governs the cloud micro-physics, which is the paramount factor playing on the radiative properties of clouds. Moreover, this soluble fraction is the source of species imply in the oxidation/reduction reactions in the aqueous phase. Thus, it is of particular importance to understand the process controlling the solubilization of aerosols in the cloud droplets. The main purpose of this work is to investigate experimentally and theoretically the dissolution of particles incorporated in the aqueous phase. From the studies conducted up to now, we have identify several factors playing on the dissolution reaction of aerosols. However, the quantification of the effects of these factors is difficult since the current means of study are not adapted to the complexity of cloud systems. First, this work consisted to perform a experimental system, compound by an open flow reactor, enabling to follow the kinetic of dissolution in conditions representative of cloud. This experimental device is used to a systematic characterisation of the known factors playing on the dissolution, i.e. pH, aerosol nature, aerosol weathering... and also for the identification and the quantification of the effects of other factors: ionic strength, acid nature, clouds processes. These experiments gave quantitative results, which are used to elaborate a simple model of aerosol dissolution in the aqueous phase. This model considers the main factors playing on the dissolution and results in a general mechanism of aerosol dissolution extrapolated to the cloud droplets. (author)

  3. Sub-micron atmospheric aerosols in the surroundings of Marseille and Athens: physical characterization and new particle formation

    Directory of Open Access Journals (Sweden)

    T. Petäjä

    2007-01-01

    Full Text Available The properties of atmospheric aerosol particles in Marseille and Athens were investigated. The studies were performed in Marseille, France, during July 2002 and in Athens, Greece, during June 2003. The aerosol size distribution and the formation and growth rates of newly formed particles were characterized using Differential Mobility Particle Sizers. Hygroscopic properties were observed using a Hygroscopic Tandem Differential Mobility Analyzer setup. During both campaigns, the observations were performed at suburban, almost rural sites, and the sites can be considered to show general regional background behavior depending on the wind direction. At both sites there were clear pattern for both aerosol number concentration and hygroscopic properties. Nucleation mode number concentration increased during the morning hours indicating new particle formation, which was observed during more than 30% of the days. The observed formation rate was typically more than 1 cm−3 s−1, and the growth rate was between 1.2–9.9 nm h−1. Based on hygroscopicity measurements in Athens, the nucleation mode size increase was due to condensation of both water insoluble and water soluble material. However, during a period of less anthropogenic influence, the growth was to a larger extent due to water insoluble components. When urban pollution was more pronounced, growth due to condensation of water soluble material dominated.

  4. Atmospheric Aerosols in the Suburb of Prague

    Czech Academy of Sciences Publication Activity Database

    Matějková, Daniela; Ždímal, Vladimír; Schwarz, Jaroslav; Smolík, Jiří

    -: -, 2009, T051A30. [European Aerosol Conference 2009. Karlsruhe (DE), 06.09.2009-11.09.2009] Grant ostatní: MF CZ:(FI) 0049 Institutional research plan: CEZ:AV0Z40720504 Keywords : atmospheric aerosols * particle formation * particle size distribution Subject RIV: CF - Physical ; Theoretical Chemistry

  5. Hygroscopicity of internally mixed multi-component aerosol particles of atmospheric relevance

    Science.gov (United States)

    Liu, Qifan; Jing, Bo; Peng, Chao; Tong, Shengrui; Wang, Weigang; Ge, Maofa

    2016-01-01

    The hygroscopic properties of two water-soluble organic compounds (WSOCs) relevant to urban haze pollution (phthalic acid and levoglucosan) and their internally mixtures with inorganic salts (ammonium sulfate and ammonium nitrate) are investigated using a hygroscopicity tandem differential mobility analyzer (H-TDMA) system. The multi-component particles uptake water gradually in the range 5-90% relative humidity (RH). The experimental results are compared with the thermodynamic model predictions. For most mixtures, Extended Aerosol Inorganic Model (E-AIM) predictions agree well with the measured growth factors. The hygroscopic growth of mixed particles can be well described by the Zdanovskii-Stokes-Robinson (ZSR) relation as long as the mixed particles are completely liquid. ZSR calculations underestimate the water uptake of mixed particles at moderate RH due to the partial dissolution of ammonium sulfate in the organic and ammonium nitrate solution in this RH region. The phase of ammonium nitrate in the initial dry particles changes dramatically with the composition of mixtures. The presence of organics in the mixed particles can inhibit the crystallization of ammonium nitrate during the drying process and results in water uptake at low RH (RH water uptake of particles.

  6. Evaluation of a global aerosol microphysics model against size-resolved particle statistics in the marine atmosphere

    Directory of Open Access Journals (Sweden)

    D. V. Spracklen

    2007-01-01

    Full Text Available A statistical synthesis of marine aerosol measurements from experiments in four different oceans is used to evaluate a global aerosol microphysics model (GLOMAP. We compare the model against observed size resolved particle concentrations, probability distributions, and the temporal persistence of different size particles. We attempt to explain the observed sub-micrometre size distributions in terms of sulfate and sea spray and quantify the possible contributions of anthropogenic sulfate and carbonaceous material to the number and mass distribution. The model predicts a bimodal size distribution that agrees well with observations as a grand average over all regions, but there are large regional differences. Notably, observed Aitken mode number concentrations are more than a factor 10 higher than in the model for the N Atlantic but a factor 7 lower than the model in the NW Pacific. We also find that modelled Aitken mode and accumulation mode geometric mean diameters are generally smaller in the model by 10–30%. Comparison with observed free tropospheric Aitken mode distributions suggests that the model underpredicts growth of these particles during descent to the marine boundary layer (MBL. Recent observations of a substantial organic component of free tropospheric aerosol could explain this discrepancy. We find that anthropogenic continental material makes a substantial contribution to N Atlantic MBL aerosol, with typically 60–90% of sulfate across the particle size range coming from anthropogenic sources, even if we analyse air that has spent an average of >120 h away from land. However, anthropogenic primary black carbon and organic carbon particles (at the emission size and quantity assumed here do not explain the large discrepancies in Aitken mode number. Several explanations for the discrepancy are suggested. The lack of lower atmospheric particle formation in the model may explain low N Atlantic particle concentrations. However, the

  7. Sensitivity studies on the photolysis rates calculation in Amazonian atmospheric chemistry ? Part I: The impact of the direct radiative effect of biomass burning aerosol particles

    OpenAIRE

    Albuquerque, L. M. M.; Longo, K. M.; S. R. Freitas; Tarasova, T.; Plana Fattori, A.; Nobre, C.; Gatti, L. V.

    2005-01-01

    International audience The impact of the direct radiative effect of the aerosol particles on the calculation of the photolysis rates and consequently on the atmospheric chemistry in regional smoke clouds due to biomass burning over the Amazon basin is addressed in this work. It explores a case study for 19 September 2002 at LBA-RACCI-SMOCC (The Large-Scale Biosphere-Atmosphere experiment in Amazonia ? Radiation, Cloud, and Climate Interactions ? Smoke, Aerosols, Clouds, Rainfall and Climat...

  8. Real time analysis of lead-containing atmospheric particles in Beijing during springtime by single particle aerosol mass spectrometry.

    Science.gov (United States)

    Ma, Li; Li, Mei; Huang, Zhengxu; Li, Lei; Gao, Wei; Nian, Huiqing; Zou, Lilin; Fu, Zhong; Gao, Jian; Chai, Fahe; Zhou, Zhen

    2016-07-01

    Using a single particle aerosol mass spectrometer (SPAMS), the chemical composition and size distributions of lead (Pb)-containing particles with diameter from 0.1 μm to 2.0 μm in Beijing were analyzed in the spring of 2011 during clear, hazy, and dusty days. Based on mass spectral features of particles, cluster analysis was applied to Pb-containing particles, and six major classes were acquired consisting of K-rich, carboneous, Fe-rich, dust, Pb-rich, and Cl-rich particles. Pb-containing particles accounted for 4.2-5.3%, 21.8-22.7%, and 3.2% of total particle number during clear, hazy and dusty days, respectively. K-rich particles are a major contribution to Pb-containing particles, varying from 30.8% to 82.1% of total number of Pb-containing particles, lowest during dusty days and highest during hazy days. The results reflect that the chemical composition and amount of Pb-containing particles has been affected by meteorological conditions as well as the emissions of natural and anthropogenic sources. K-rich particles and carbonaceous particles could be mainly assigned to the emissions of coal combustion. Other classes of Pb-containing particles may be associated with metallurgical processes, coal combustion, dust, and waste incineration etc. In addition, Pb-containing particles during dusty days were first time studied by SPAMS. This method could provide a powerful tool for monitoring and controlling of Pb pollution in real time. PMID:27085059

  9. A mobile, scanning eye-safe lidar for the study of atmospheric aerosol particles and transport processes in the lower troposphere

    OpenAIRE

    Pal, Sandip

    2009-01-01

    A high-power eye-safe scanning aerosol lidar system in the ultraviolet wavelength region is introduced for the study of the optical properties of aerosol particles and transport processes in the atmosphere, especially in the atmospheric boundary layer (ABL). This system operates with an average power of 9 W in combination with a 40-cm scanner with a speed of up to 10° s-1. A modified version of the lidar inversion algorithm is developed for the retrieval of optical properties of aerosols fro...

  10. Toward Quantifying the Mass-Based Hygroscopicity of Individual Submicron Atmospheric Aerosol Particles with STXM/NEXAFS and SEM/EDX

    Science.gov (United States)

    Yancey Piens, D.; Kelly, S. T.; OBrien, R. E.; Wang, B.; Petters, M. D.; Laskin, A.; Gilles, M. K.

    2014-12-01

    The hygroscopic behavior of atmospheric aerosols influences their optical and cloud-nucleation properties, and therefore affects climate. Although changes in particle size as a function of relative humidity have often been used to quantify the hygroscopic behavior of submicron aerosol particles, it has been noted that calculations of hygroscopicity based on size contain error due to particle porosity, non-ideal volume additivity and changes in surface tension. We will present a method to quantify the hygroscopic behavior of submicron aerosol particles based on changes in mass, rather than size, as a function of relative humidity. This method results from a novel experimental approach combining scanning transmission x-ray microscopy with near-edge x-ray absorption fine spectroscopy (STXM/NEXAFS), as well as scanning electron microscopy with energy dispersive x-ray spectroscopy (SEM/EDX) on the same individual particles. First, using STXM/NEXAFS, our methods are applied to aerosol particles of known composition ‒ for instance ammonium sulfate, sodium bromide and levoglucosan ‒ and validated by theory. Then, using STXM/NEXAFS and SEM/EDX, these methods are extended to mixed atmospheric aerosol particles collected in the field at the DOE Atmospheric Radiation Measurement (ARM) Climate Research Facility at the Southern Great Planes sampling site in Oklahoma, USA. We have observed and quantified a range of hygroscopic behaviors which are correlated to the composition and morphology of individual aerosol particles. These methods will have implications for parameterizing aerosol mixing state and cloud-nucleation activity in atmospheric models.

  11. Atmospheric aerosol light scattering and polarization peculiarities

    CERN Document Server

    Patlashenko, Zh I

    2015-01-01

    This paper considers environmental problems of natural and anthropogenic atmospheric aerosol pollution and its global and regional monitoring. Efficient aerosol investigations may be achieved by spectropolarimetric measurements. Specifically second and fourth Stokes parameters spectral dependencies carry information on averaged refraction and absorption indexes and on particles size distribution functions characteristics.

  12. Measuring and modeling the hygroscopic growth of two humic substances in mixed aerosol particles of atmospheric relevance

    Directory of Open Access Journals (Sweden)

    I. R. Zamora

    2013-09-01

    Full Text Available The hygroscopic growth of atmospheric particles affects atmospheric chemistry and Earth's climate. Water-soluble organic carbon (WSOC constitutes a significant fraction of the dry submicron mass of atmospheric aerosols, thus affecting their water uptake properties. Although the WSOC fraction is comprised of many compounds, a set of model substances can be used to describe its behavior. For this study, mixtures of Nordic aquatic fulvic acid reference (NAFA and Fluka humic acid (HA, with various combinations of inorganic salts (sodium chloride and ammonium sulfate and other representative organic compounds (levoglucosan and succinic acid, were studied. We measured the equilibrium water vapor pressure over bulk solutions of these mixtures as a function of temperature and solute concentration. New water activity (aw parameterizations and hygroscopic growth curves at 25 °C were calculated from these data for particles of equivalent composition. We examined the effect of temperature on the water activity and found a maximum variation of 9% in the 0–30 °C range, and 2% in the 20–30 °C range. Five two-component mixtures were studied to understand the effect of adding a humic substance (HS, such as NAFA and HA, to an inorganic salt or a saccharide. The deliquescence point at 25 °C for HS-inorganic mixtures did not change significantly from that of the pure inorganic species. However, the hygroscopic growth of HA / inorganic mixtures was lower than that exhibited by the pure salt, in proportion to the added mass of HA. The addition of NAFA to a highly soluble solute (ammonium sulfate, sodium chloride or levoglucosan in water had the same effect as the addition of HA to the inorganic species for most of the water activity range studied. Yet, the water uptake of these NAFA mixtures transitioned to match the growth of the pure salt or saccharide at high aw values. The remaining four mixtures were based on chemical composition data for different

  13. Dust and atmospheric aerosol

    International Nuclear Information System (INIS)

    The paper describes the types and characteristics of the various aerosol particles (by size effects, and origin) and goes on to discuss the composition of particulates and their variation in different places in Asia, and the origin of global particulate emissions from natural and anthropogenic sources. The effects of particulate matter on human health, visibility and climate are summarised. Techniques for control and abatement of particulate emissions are outlined. 10 refs., 4 figs., 11 tabs

  14. Atmospheric and aerosol chemistry

    International Nuclear Information System (INIS)

    This series presents critical reviews of the present position and future trends in modern chemical research. Short and concise reports on chemistry, each written by the world renowned experts. Still valid and useful after 5 or 10 years. More information as well as the electronic version of the whole content available at: springerlink.com. Christian George, Barbara D'Anna, Hartmut Herrmann, Christian Weller, Veronica Vaida, D. J. Donaldson, Thorsten Bartels-Rausch, Markus Ammann Emerging Areas in Atmospheric Photochemistry. Lisa Whalley, Daniel Stone, Dwayne Heard New Insights into the Tropospheric Oxidation of Isoprene: Combining Field Measurements, Laboratory Studies, Chemical Modelling and Quantum Theory. Neil M. Donahue, Allen L. Robinson, Erica R. Trump, Ilona Riipinen, Jesse H. Kroll Volatility and Aging of Atmospheric Organic Aerosol. P. A. Ariya, G. Kos, R. Mortazavi, E. D. Hudson, V. Kanthasamy, N. Eltouny, J. Sun, C. Wilde Bio-Organic Materials in the Atmosphere and Snow: Measurement and Characterization V. Faye McNeill, Neha Sareen, Allison N. Schwier Surface-Active Organics in Atmospheric Aerosols.

  15. Determination of alkyl amines in atmospheric aerosol particles: a comparison of gas chromatography-mass spectrometry and ion chromatography approaches

    Directory of Open Access Journals (Sweden)

    R.-J. Huang

    2014-03-01

    Full Text Available In recent years low molecular weight alkyl amines have been recognized to play an important role in particle formation and growth in the lower atmosphere. However, major uncertainties are associated with their atmospheric processes, sources and sinks, mostly due to the lack of ambient measurements and the difficulties in accurate quantification of alkyl amines at trace level. In this study, we present the evaluation and optimization of two analytical approaches, i.e., gas chromatography-mass spectrometry (GC-MS and ion chromatography (IC, for the determination of alkyl amines in aerosol particles. Alkyl amines were converted to carbamates through derivatization with isobutyl chloroformate for GC-MS determination. A set of parameters affecting the analytical performances of the GC-MS approach, including reagent amount, reaction time and pH value, was evaluated and optimized. The accuracy is 84.3–99.1%, and the limits of detection obtained are 1.8–3.9 pg. For the IC approach, a solid phase extraction (SPE column was used to separate alkyl amines from interfering cations before IC analysis. 1–2% (v/v of acetone (or 2–4% (v/v of acetonitrile was added to the eluent to improve the separation of alkyl amines on the IC column. The limits of detection obtained are 2.1–15.9 ng and the accuracy is 55.1–103.4%. The lower accuracy can be attributed to evaporation losses of amines during the sample concentration procedure. Measurements of ambient aerosol particle samples collected in Hong Kong show that the GC-MS approach is superior to the IC approach for the quantification of primary and secondary alkyl amines due to its lower detection limits and higher accuracy.

  16. A study of inter-particle bonds in dry bauxite waste resulting in atmospheric aerosols

    Science.gov (United States)

    Wagh, Arun S.; Thompson, Bentley

    1988-02-01

    Bauxite and Alumina production are one of the main activities of several third world countries such as Jamaica, Brazil, India, Guinea, eastern European countries such as Hungary and Rumania and advanced countries such as Australia, West Germany, Japan and the United States. The mining operations lead to dust pollution, but the refining of bauxite to alumina yield large amounts of highly caustic sludge waste, called "Red Mud". Millions of tons of the waste produced in every country are stored in containment dams or natural valleys. This leads to ground water pollution, destruction of plant and bird life and is hazardous to human settlement in earthquake prone regions like Jamaica. As a result several companies have been looking into dry mud stacking which involves thickening the mud in the refining plants and sprying it on the slopes to sun dry it. Typically it involves a drying field of about two hundred acres, which could act as a potential source of caustic dust. In Jamaica one company has started disposing of the mud in this way. The aerosol formation from such areas depends mainly on the integrity of the top dry layers. Presently this is done by studying the approximate parameters such as the friability of the mud. However, following the recent advances in powder technology it has been possible for us to develop an instrument to study the average interparticle forces between the red mud particles. The instrument is based on the principle of a tensometer and a split cell is used to load specimens. A load cell is used to measure the force and a chart recorder is used for plotting separation and the force. The present study reports elemental composition of the dust and its health hazards. It also reports the physical measurement of the average interparticle force as a function of their separation in the Jamaican mud. The effect of ultraviolet radiation on the strength of the material is studied to see the effect of sun-drying of the waste. The five-fold increase

  17. Evaluation of a global aerosol microphysics model against size-resolved particle statistics in the marine atmosphere

    OpenAIRE

    Spracklen, D. V.; Pringle, K. J.; K. S. Carslaw; G. W. Mann; P. Manktelow; Heintzenberg, J.

    2007-01-01

    A statistical synthesis of marine aerosol measurements from experiments in four different oceans is used to evaluate a global aerosol microphysics model (GLOMAP). We compare the model against observed size resolved particle concentrations, probability distributions, and the temporal persistence of different size particles. We attempt to explain the observed sub-micrometre size distributions in terms of sulfate and sea spray and quantify the possible contributions of anthropogenic sulfate and ...

  18. Modification of combustion aerosols in the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Weingartner, E. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1996-07-01

    Combustion aerosols particles are released on large scale into the atmosphere in the industrialized regions as well as in the tropics (by wood fires). The particles are subjected to various aging processes which depend on the size, morphology, and chemical composition of the particles. The interaction of combustion particles with sunlight and humidity as well as adsorption and desorption of volatile material to or from the particles considerably changes their physical and chemical properties and thus their residence time in the atmosphere. This is of importance because combustion particles are known to have a variety of health effects on people. Moreover, atmospheric aerosol particles have an influence on climate, directly through the reflection and absorption of solar radiation and indirectly through modifying the optical properties and lifetime of clouds. In a first step, a field experiment was carried out to study the sources and characteristics of combustion aerosols that are emitted from vehicles in a road tunnel. It was found that most of the fine particles were tail pipe emissions of diesel powered vehicles. The calculation shows that on an average these vehicles emit about 300 mg fine particulate matter per driven kilometer. This emission factor is at least 100 times higher than the mean emission factor estimated for gasoline powered vehicles. Furthermore, it is found that during their residence time in the tunnel, the particles undergo significant changes: The particles change towards a more compact structure. The conclusion is reached that this is mainly due to adsorption of volatile material from the gas phase to the particle surface. In the atmosphere, the life cycle as well as the radiative and chemical properties of an aerosol particle is strongly dependent on its response to humidity. Therefore the hygroscopic behavior of combustion particles emitted from single sources (i.e. from a gasoline and a diesel engine) were studied in laboratory experiments.

  19. Washout and dry deposition of atmospheric aerosols

    International Nuclear Information System (INIS)

    The deposition velocities onto different rough surfaces and the washout coefficients of simulated rain droplets for submicron aerosols were studied in a wind channel. The influence of particle size and electric charge upon the collection efficiencies of simulated rain droplets was measured. The deposition velocity of the particles was determined as a function of aerosol size, wind velocity and roughness of the surface. The experiments were carried out with monodisperse, radioactive particles with sizes which were varied from 0.03 and 5 μm. Using the measured values, the activity flux of the long lived radon decay product (RaD), the mass flux of the atmospheric aerosol and the activity flux near a stack of a nuclear power plant onto the ground surface were calculated considering washout, rainout and dry deposition in the atmosphere. (author)

  20. Aliphatic and aromatic amines in atmospheric aerosol particles: comparison of three ionization techniques in liquid chromatography-mass spectrometry and method development.

    Science.gov (United States)

    Ruiz-Jiménez, José; Hautala, Sanna; Parshintsev, Jevgeni; Laitinen, Totti; Hartonen, Kari; Petäjä, Tuukka; Kulmala, Markku; Riekkola, Marja-Liisa

    2012-08-15

    A complete methodology was developed for the determination of ten aliphatic and nine aromatic amines in atmospheric aerosol particles. Before the liquid chromatography - tandem mass spectrometric separation and determination, the derivatization reaction of the analytes using dansyl chloride was accelerated by ultrasounds. From three different ionization techniques studied electrospray ionization was superior in terms of sensitivity, linearity, repeatability and reproducibility over atmospheric pressure chemical ionization and photoionization for the target analytes. The method developed was validated for the gas phase, 30 nm and total suspended atmospheric aerosol particles. The method quantification limits ranged between 1.8 and 71.7 pg. The accuracy and the potential matrix effects were evaluated using a standard addition methodology. Recoveries from 92.1% to 109.1%, the repeatability from 0.6% to 8.4% and the reproducibility from 2.3% to 9.8% were obtained. The reliability of the methodology was proved by the statistical evaluation. Finally, the developed methodology was applied to the determination of the target analytes in eight size separated ultrafine particulate (Dp=30±4 nm) samples and in eight total suspended particulate samples collected at the SMEAR II station. The mean concentrations for aliphatic amines were between 0.01 and 42.67 ng m(-3) and for aromatic amines between 0.02 and 1.70 ng m(-3). Thirteen amines were quantified for the first time in 30 nm aerosol particles. PMID:22841047

  1. Biological aerosol particles in the atmosphere and their impact on clouds (BIOCLOUDS)

    Science.gov (United States)

    Amato, Pierre; Attard, Eleonore; Deguillaume, Laurent; Delort, Anne-Marie; Flossmann, Andrea; Good, Nicholas; Joly, Muriel; Koop, Thomas; Möhler, Ottmar; Monier, Marie; Morris, Cindy; Oehm, Caroline; Pöschl, Ulrich; Sancelme, Martine

    2015-04-01

    The project BIOCLOUDS aimed at investigating and quantifying the role of bioaerosols in tropospheric clouds. We focused on the studies on microorganisms, mainly bacteria. To reach our objective we (1) isolated and identified INA bacterial strains in cloud waters, (2) studied in more details IN properties of bacteria isolated from cloud waters in laboratories and cloud chamber, (3) used new data as input to cloud models. 1. Isolation and Identification of INA bacterial strains in cloud waters Cloud water samples were collected at the puy de Dôme station under sterile conditions, microorganisms were cultured on agar plates and further identified by DNA sequencing coding for16SrRNA. 257 bacterial strains isolated from 25 cloud events were screened and 44 isolates were selected as they belonged to Pseudomonas, Xanthomonas and Erwinia genera which are potential INA candidates. Using the classical "Droplet Freezing method" as ice nucleation test, 7 strains were shown INA+. Their cumulative IN frequency profiles were established and showed that some of them are very efficient, for example the strain Pseudomonas syringae 13b74 started to nucleate a t-3°C and 4% of the cells were active at- 5°C. 2. Further laboratory investigations of IN properties of cloud bacterial strains All the experiments presented in this section were carried out with 3 Pseudomonas syringae strains. We tested the influence of O3, NO, UV and pH, which are atmospheric markers of anthropogenic activity, on the IN activity of the Pseudomonas strains. It was clearly shown that pH had a main influence, acidic pHs decreased the IN activity of the strains. This suggests a negative impact of human emissions on the natural capacity of bacteria to precipitate with rain. The 3 Pseudomas strains were sprayed in the AIDA cloud chamber. The survival of these strains with time before cloud formation was measured and will be used in the future to parameterize models for bacterial transport. After cloud formation

  2. The effect of particle acidity on secondary organic aerosol formation from α-pinene photooxidation under atmospherically relevant conditions

    OpenAIRE

    Han, Yuemei; Stroud, Craig A.; Liggo, John; Li, Shao-Meng

    2016-01-01

    Secondary organic aerosol (SOA) formation from OH-initiated photooxidation of α-pinene has been investigated in a photochemical reaction chamber under varied particle acidity levels. The effect of particle acidity on SOA yield and chemical composition was examined under high- and low-NOx conditions. The SOA yield (4.0 %–7.3 %) increased nearly linearly with the increase in particle acidity under high-NOx conditions. In contrast, the SOA yield (27.9 %–35.6 %) was substantially higher under low...

  3. Cluster analysis of elemental constituents of individual atmospheric aerosol particles from the volcanic plume of Lonquimay eruption in 1989

    International Nuclear Information System (INIS)

    Aerosol samples collected around the Chilean site Lonquimay during major volcanic activities in January 1989 have been subjected to microPIXE measurements of 1 μm lateral resolution in the Debrecen Institute. Elemental concentrations relative to calcium have been determined for Al, Si, P, S, K, Sc, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, and Ba in 187 individual aerosol particles with the particle sizes between 15 μm and 1 μm. On the basis of a cluster analysis performed on the data set we defined eight clusters. Scatter plots for selected pairs of elements as Si/Al, K/Si, S/Cl, and Al/S elemental ratios that are considered as signatures characterizing types and mechanisms in volcanic eruption - have been compared with published data available in the literature for various volcanic sites. (author)

  4. Hygroscopic properties of atmospheric aerosol particles over the Eastern Mediterranean: implications for regional direct radiative forcing under clean and polluted conditions

    Science.gov (United States)

    Stock, M.; Cheng, Y. F.; Birmili, W.; Massling, A.; Wehner, B.; Müller, T.; Leinert, S.; Kalivitis, N.; Mihalopoulos, N.; Wiedensohler, A.

    2011-05-01

    This work examines the effect of direct radiative forcing of aerosols in the eastern Mediterranean troposphere as a function of air mass composition, particle size distribution and hygroscopicity, and relative humidity (RH). During intensive field measurements on the island of Crete, Greece, the hygroscopic properties of atmospheric particles were determined using a Hygroscopicity Tandem Differential Mobility Analyzer (H-TDMA) and a Hygroscopicity Differential Mobility Analyzer-Aerodynamic Particle Sizer (H-DMA-APS). Similar to former studies, the H-TDMA identified three hygroscopic sub-fractions of particles in the sub-μm range: a more hygroscopic group, a less hygroscopic group and a nearly hydrophobic particle group. The average hygroscopic particle growth factors at 90 % RH were a significant function of particle mobility diameter (Dp): 1.42 (± 0.05) at 30 nm compared to 1.63 (± 0.07) at 250 nm. The H-DMA-APS identified up to three hygroscopic sub-fractions at mobility diameters of 1.0 and 1.2 μm. The data recorded between 12 August and 20 October 2005 were classified into four distinct synoptic-scale air mass types distinguishing between different regions of origin (western Mediterranean vs. the Aegean Sea) as well as the degree of continental pollution (marine vs. continentally influenced). The hygroscopic properties of particles with diameter Dp≥150 nm showed the most pronounced dependency on air mass origin, with growth factors in marine air masses exceeding those in continentally influenced air masses. Particle size distributions and hygroscopic growth factors were used to calculate aerosol light scattering coefficients at ambient RH using a Mie model. A main result was the pronounced enhancement of particle scattering over the eastern Mediterranean due to hygroscopic growth, both in the marine and continentally influenced air masses. When RH reached its summer daytime values around 70-80 %, up to 50-70 % of the calculated visibility reduction was

  5. Nature of Atmospheric Aerosols over the Desert Areas in the Asian Continent: Chemical State and Number Concentration of Particles Measured at Dunhuang, China

    International Nuclear Information System (INIS)

    Measurements of aerosol were made in August and October 2001, and January 2002, at Dunhuang, China (40o00'N, 94o30'E), to understand the nature of atmospheric particles over the desert areas in the Asian continent. Balloon-borne measurements with an optical particle counter suggested that particle size and concentration had a noticeable peak in size range of super micron in not only the boundary mixing layer but also the free troposphere. Thickness of the boundary mixing layer, from distributions of particle concentration, was about 4 km in summer (17 August 2001), about2.5 km in fall (17 October 2001), and about 3 km in winter (11 January 2002), which suggest active mixing of particles near the boundary in summer. Number-size distribution of particle showed a noticeable peak in the super micron particles size range in the mixing boundary layer: 0.4-2 particles cm-3 at diameter>1.2 μm in summer, 0.05-4 particles cm-3 at diameter >1.2 μm in fall, and 0.1-5 particles cm-3 at diameter>1.2 μm in winter. In winter strong inversion of atmospheric temperature was found in the height range from the boundary to about 3 km and vertical distribution of particle concentration well corresponded with the temperature distribution. Chemical elements of individual aerosols, which were collected in the boundary layer atmosphere at Dunhuang (18 October 2001) were analyzed with an electron microscope equipped with EDX. Those single particle analysis suggested that most of the particles with supermicron size were soil particles, and those particles had little sulfate on its surface. This is a very important different point,comparing with the chemical state of soil particles, which were transported from the desert area of China to Japan, and showed frequently the existence of sulfate on the particle surface. Therefore, it is strongly suggested that dust particles can be chemically modified during their long-range transport from desert areas to Japan

  6. Pulmonary deposition of urban atmospheric aerosol. Assessments of the mass, number and surface of the deposited particles; Deposizione polmonare dell'aerosol atmosferico urbano in termini di massa, numero e superficie delle particelle

    Energy Technology Data Exchange (ETDEWEB)

    Luciani, A.; Berico, M.; Castellani, C.M. [ENEA, Centro Ricerche Ezio Clementel, Bologna (Italy). Dipt. Ambiente

    1998-07-01

    Pulmonary deposition of urban atmospheric aerosol has been calculated by means of the data derived from March 1995 measurement campaign of urban aerosol. The human respiratory tract model of the International Commission on Radiological Protection (n. 66) developed for radiation protection purposes has been used. The number and surface of the deposited particles, as well as the mass, have been also evaluated. [Italian] I dati relativi alla campagna di misure effettuata nel marzo 1995 sono stati rielaborati al fine di valutare la deposizione polmonare dell'aerosol atmosferico in area urbana. Le valutazioni di deposizione nel tratto respiratorio umano sono state condotte mediante l'utilizzo del modello del tratto respiratorio umano presentato per fini radioprotezionistici dalla International Commission on Radiological Protection (n. 66). Sono state effettuate valutazioni di deposizione in massa e in termini di numero e superficie delle particelle.

  7. Condensation on Aerosol Particles and its Inhibition.

    Science.gov (United States)

    Liu, Peter Shen King

    The atmospheric aerosol is of primary importance in the formation of precipitation. Except in the neighbourhood of large sources of pollution most of the atmospheric particles are of natural origin, but human contribution is increasing at such a rate that within a comparatively short time it may equal nature's. Such an increase in the atmospheric particulate load may have significant effects on the distribution and intensity of precipitation. There is a general perception that most of the atmospheric particulate load is soluble in water or has some soluble component and soluble particles condense water more readily than insoluble. In this work a study is made of the solubility of the atmospheric aerosol at various relative humidities. The results confirm that much of the atmospheric aerosol is indeed soluble, but that the soluble proportion is highly variable. This result has significant implications for studies of air pollution in which the respirable fraction of the atmospheric aerosol is deduced from the results of long term dichotomous sampling. Results are also presented of studies in which an attempt was made to inhibit the condensation of water on man-made and adventitious particles with a view to modifying their possible climatic effects. This work has demonstrated that certain agents, notably long chain amines, do indeed have an inhibiting effect on the condensation of water on particles which have been exposed to them, but that the effect of the agents so far tested is not sufficiently great to be of immediate practical importance. It is concluded that further advances must await more precise methods of producing small supersaturations reliably and reproducibly.

  8. Atmospheric Aerosol Loading and Transport Due to the 1783-84 Laki Eruption in Iceland, Interpreted from Ash Particles and Acidity in the GISP2 Ice Core

    Science.gov (United States)

    Fiacco, R. Joseph; Thordarson, Thorvaldur; Germani, Mark S.; Self, Stephen; Palais, Julie M.; Whitlow, Sallie; Grootes, Peter M.

    1994-11-01

    Glass shards from the A.D. 1783 Laki fissure eruption in Iceland have been identified in the GISP2 ice core from Summit, Greenland, at a level just preceding the major acidity/sulfate peak. Detailed reconstruction of ice stratigraphy, coupled with analyses of solid particles from filtered samples, indicate that a small amount of Laki ash was carried via atmospheric transport to Greenland in the summer of 1783, whereas the main aerosol precipitation occurred in the summer and early fall of 1784. Sulfate concentrations in the ice increase slightly during late summer and fall of 1783 and remain steady throughout the winter due to slow oxidation rates during this season in the Arctic. The sulfate concentration rises dramatically in the spring and summer of 1784, producing a massive sulfate peak, previously believed to have accumulated during the summer of 1783 and commonly used as the marker horizon in Greenland ice core studies. The chronology of ash and acid fallout at the GISP2 site suggests that a significant portion of the Laid eruption plume penetrated the tropopause and that aerosol generated from it remained aloft for at least 1 yr after the eruption. Based on comparisons with other glaciochemical seasonal indicators, abnormally cool conditions prevailed at Summit during the summer of 1784. This further supports the claim that a significant volume of sulfate aerosol remained in the Arctic middle atmosphere well after the eruption had ceased.

  9. Beijing aerosol: Atmospheric interactions and new trends

    International Nuclear Information System (INIS)

    Beijing aerosols are scrutinized as a case study for atmospheric interactions in a complex multi-source situation. For the first time, fine (≤ 2 μm) and coarse (≥ 2 μm) aerosols were continuously collected during a time period (20 months) long enough to capture seasonal trends of sources and interactions. Weekly samples were obtained from January 2003 to August 2004 downtown and during 9 months at two peri-urban sites. Aerosol samples were chemically characterized (black carbon (BC), organic carbon (OC), and major ions) and dust was obtained from mass closure. Concentration data were smoothed and boundary layer height (BLH) corrected in order to better identify sources and processes. All yearlong, the coarse aerosol is dominated by dust (75%) whereas the fine mode is dominated (46%) by carbonaceous particles. Photochemistry is an intense driving force for secondary aerosol formation including secondary organic aerosol (SOA). Dust particles present a reactive surface for secondary aerosol formation from the intense anthropogenic pool of acidic gaseous precursors (SO2, HNO3, and volatile organic compounds (VOCs)). These interactions favor the formation of a very significant coarse fraction for SO4, NO3, and POM, a feature almost never encountered in developed countries. Surprisingly too is the presence of fine NH4NO3 in summer. A new result is also that the winter 'heating season' appears at present of minor importance with, however, a significant component from domestic heating as traced by BC/OC. In the future, traffic is likely to dominate downtown anthropogenic emissions. Year-to-year variability in meteorological conditions is likely to influence inputs from arid regions and from regional industrial and biomass burning sources. (authors)

  10. Numerical calculation of the optical properties for compound aerosol particles

    International Nuclear Information System (INIS)

    The atmosphere aerosol is an important part in earth and atmosphere system. The optical parameters are the important influence factors for evaluating atmospheric environment and studying the aerosol radiation climatic effect. They are also the key parameters for the research on the characteristics of laser propagation in atmosphere. According to the electrical structure of matter, the compound aerosol particles are dispersed into a series of dipoles, then by combining with discrete dipole approximation method and after obtaining the electric dipole moment of each dipole, the authors get the numerical results of the changes of extinction cross section, absorption cross section and asymmetry factor of spherical shape, ellipsoid shape and stratiform compound aerosol particles with wavelength, and made a comparative analysis of the optical parameter values for the ellipsoidal shape of single and composite components aerosol particles. The results show that all the incident wavelength, shape and component of aero- sol particles can affect the optical properties of aerosol particles. These can provides an efficiency approach and foundation for the research of the atmospheric optics, the aerosol climate radiative forcing effect, laser atmospheric transmission, etc. (authors)

  11. The influence of ions on atmospheric aerosol processes

    DEFF Research Database (Denmark)

    Enghoff, Martin

    2008-01-01

    Ice Age, the Medieval Warmth, and other climate phenomena going further back in time, is that of Ion Induced Nucleation { the ability of ions to enhance the formation of aerosol particles in the atmosphere. Several nucleation events that cannot be explained with the standard theory of homogeneous....... 188]. In this study 3 dierent experimental setups were employed to investigate the eect of ions on aerosol processes under atmospheric conditions. 1...

  12. Particle pollution changes the atmospheric circulation

    International Nuclear Information System (INIS)

    Industrial emissions and combustion of fossil fuels create large amounts of sulfate- and carbon containing soot particles. These mix with natural particles to change the natural aerosols. Such anthropogenic changes in the aerosols may have a great impact on the climate of the earth. Altered properties of the aerosols may change the atmosphere's absorption and reflection of solar radiation and contribute to heating or cooling. This is the direct effect. Changes in the properties of aerosols may also affect the number and size of recently formed cloud droplets. This may change the ability of the clouds to reflect solar radiation and to produce precipitation. This is the indirect effect. Recent research at the University of Oslo shows that anthropogenic particles significantly change the atmospheric circulation, in particular in the tropics, but also at European latitudes

  13. SMEX02 Atmospheric Aerosol Optical Properties Data

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of observations of atmospheric parameters including spectral aerosol optical depths, precipitable water, sky radiance distributions and...

  14. Rapid changes in biomass burning aerosols by atmospheric oxidation

    OpenAIRE

    Vakkari, Ville; Beukes, Johan Paul; Tiitta, Petri; van Zyl, Pieter G.; Josipovic, Miroslav; Venter, Andrew D.; Jaars, Kerneels

    2014-01-01

    Primary and secondary aerosol particles originating from biomass burning contribute significantly to the atmospheric aerosol budget and thereby to both direct and indirect radiative forcing. Based on detailed measurements of a large number of biomass burning plumes of variable age in southern Africa, we show that the size distribution, chemical composition, single-scattering albedo, and hygroscopicity of biomass burning particles change considerably during the first 2–4 h of their...

  15. Physicochemical variations in atmospheric aerosols recorded at sea onboard the Atlantic-Mediterranean 2008 Scholar Ship cruise (Part I): Particle mass concentrations, size ratios, and main chemical components

    Science.gov (United States)

    Pérez, Noemí; Moreno, Teresa; Querol, Xavier; Alastuey, Andrés; Bhatia, Ravinder; Spiro, Baruch; Hanvey, Melanie

    2010-07-01

    We report on ambient atmospheric aerosols present at sea during the Atlantic-Mediterranean voyage of Oceanic II (The Scholar Ship) in spring 2008. A record was obtained of hourly PM 10, PM 2.5, and PM 1 particle size fraction concentrations and 24-h filter samples for chemical analysis which allowed for comparison between levels of crustal particles, sea spray, total carbon, and secondary inorganic aerosols. On-board monitoring was continuous from the equatorial Atlantic to the Straits of Gibraltar, across the Mediterranean to Istanbul, and back via Lisbon to the English Channel. Initially clean air in the open Atlantic registered PM 10 levels polluted by increasingly coarse PM as the ship approached land. Away from major port cities, the main sources of atmospheric contamination identified were dust intrusions from North Africa (NAF), smoke plumes from biomass burning in sub-Saharan Africa and Russia, industrial sulphate clouds and other regional pollution sources transported from Europe, sea spray during rough seas, and plumes emanating from islands. Under dry NAF intrusions PM 10 daily mean levels averaged 40-60 μg m -3 (30-40 μg m -3 PM 2.5; c. 20 μg m -3 PM 1), peaking briefly to >120 μg m -3 (hourly mean) when the ship passed through curtains of higher dust concentrations amassed at the frontal edge of the dust cloud. PM 1/PM 10 ratios ranged from very low during desert dust intrusions (0.3-0.4) to very high during anthropogenic pollution plume events (0.8-1).

  16. Study of atmospheric aerosol processing using confocal Raman microspectroscopy

    Science.gov (United States)

    Laskina, O.; Grassian, V. H.

    2012-12-01

    Aerosols undergo aging and heterogeneous chemistry as they are transported through the atmosphere. This leads to changes in their properties and their effects on climate, biogeochemistry and human health. Chemical imaging of individual particles may be used to directly investigate the heterogeneity of composition within atmospheric aerosol particles. Single-particle Raman microspectroscopy is a powerful method for chemical imaging and non-destructive physico-chemical characterization of aerosol particles. In this study we investigate the effect of chemical processing on the distribution of chemical species in single particles of mineral dust aerosol using Raman spectral imaging. Raman mapping was used to show the distribution of humic substances and organic acids on some major components of mineral dust (quartz, clays and calcium carbonate). It was shown that humic materials form coating on the surface of particles, whereas interactions of calcium carbonate with organic acids (oxalic and acetic acids) lead to reactions that cause a heterogeneous distribution of components within the reacted particle. Additionally, in a newly designed flow system aerosol can be equilibrated at different relative humidities to study hygroscopicity and phase transitions within these particles. These types of studies are important as the distribution of species in a single particle determines its reactivity, water uptake, and optical properties and thus defines its impact on climate and environment.

  17. Atmospheric Aerosols at the MAGIC Site

    CERN Document Server

    Garrido, Daniel; Doro, Michele; Font, Lluís; López-Oramas, Alicia; Moralejo, Abelardo

    2013-01-01

    We investigate the performance of the MAGIC telescopes under three simulated atmospheric conditions: an increased aerosol content in the lower part of the troposphere, the presence of thin aerosol over-densities at different heights, and an extremely clean atmosphere. Weshow how the effective area of the telescope system is gradually reduced in the presence of varying concentrations of aerosols whereas the energy threshold rises. Clouds at different heights produce energy and altitude-dependent effects on the performance of the system.

  18. Present role of PIXE in atmospheric aerosol research

    Science.gov (United States)

    Maenhaut, Willy

    2015-11-01

    In the 1980s and 1990s nearly half of the elemental analyses of atmospheric aerosol samples were performed by PIXE. Since then, other techniques for elemental analysis became available and there has been a steady increase in studies on organic aerosol constituents and other aspects of aerosols, especially in the areas of nucleation (new particle formation), optical properties, and the role of aerosol particles in cloud formation and properties. First, a brief overview and discussion is given of the developments and trends in atmospheric aerosol analysis and research of the past three decades. Subsequently, it is indicated that there is still invaluable work to be done by PIXE in atmospheric aerosol research, especially if one teams up with other aerosol researchers and performs complementary measurements, e.g., on small aerosol samples that are taken with high-time resolution. Fine examples of such research are the work done by the Lund group in the CARIBIC aircraft studies and the analysis of circular streaker samples by the Florence PIXE group. These and other examples are presented and other possibilities of PIXE are indicated.

  19. Study of atmospheric aerosols and mixing layer by LIDAR

    International Nuclear Information System (INIS)

    The LIDAR (laser radar) is an active remote sensing technique, which allows for the altitude-resolved observation of several atmospheric constituents. A typical application is the measurement of the vertically resolved aerosol optical properties. By using aerosol particles as a marker, continuous determination of the mixing layer height (MLH) can also be obtained by LIDAR. Some examples of aerosol extinction coefficient profiles and MLH extracted from a 1-year LIDAR data set collected in Milan (Italy) are discussed and validated against in situ data (from a balloon-borne optical particle counter). Finally a comparison of the observation-based MLH with relevant numerical simulations (mesoscale model MM5) is provided. (authors)

  20. Energetic particle influences in Earth's atmosphere

    Science.gov (United States)

    Aplin, Karen; Harrison, R. Giles; Nicoll, Keri; Rycroft, Michael; Briggs, Aaron

    2016-04-01

    Energetic particles from outer space, known as galactic cosmic rays, constantly ionise the entire atmosphere. During strong solar storms, solar energetic particles can also reach the troposphere and enhance ionisation. Atmospheric ionisation generates cluster ions. These facilitate current flow in the global electric circuit, which arises from charge separation in thunderstorms driven by meteorological processes. Energetic particles, whether solar or galactic in origin, may influence the troposphere and stratosphere through a range of different mechanisms, each probably contributing a small amount. Some of the suggested processes potentially acting over a wide spatial area in the troposphere include enhanced scavenging of charged aerosol particles, modification of droplet or droplet-droplet behavior by charging, and the direct absorption of infra-red radiation by the bending and stretching of hydrogen bonds inside atmospheric cluster-ions. As well as reviewing the proposed mechanisms by which energetic particles modulate atmospheric properties, we will also discuss new instrumentation for measurement of energetic particles in the atmosphere.

  1. Toxicity of atmospheric aerosols on marine phytoplankton

    Science.gov (United States)

    Paytan, A.; Mackey, K.R.M.; Chen, Y.; Lima, I.D.; Doney, S.C.; Mahowald, N.; Labiosa, R.; Post, A.F.

    2009-01-01

    Atmospheric aerosol deposition is an important source of nutrients and trace metals to the open ocean that can enhance ocean productivity and carbon sequestration and thus influence atmospheric carbon dioxide concentrations and climate. Using aerosol samples from different back trajectories in incubation experiments with natural communities, we demonstrate that the response of phytoplankton growth to aerosol additions depends on specific components in aerosols and differs across phytoplankton species. Aerosol additions enhanced growth by releasing nitrogen and phosphorus, but not all aerosols stimulated growth. Toxic effects were observed with some aerosols, where the toxicity affected picoeukaryotes and Synechococcus but not Prochlorococcus.We suggest that the toxicity could be due to high copper concentrations in these aerosols and support this by laboratory copper toxicity tests preformed with Synechococcus cultures. However, it is possible that other elements present in the aerosols or unknown synergistic effects between these elements could have also contributed to the toxic effect. Anthropogenic emissions are increasing atmospheric copper deposition sharply, and based on coupled atmosphere-ocean calculations, we show that this deposition can potentially alter patterns of marine primary production and community structure in high aerosol, low chlorophyll areas, particularly in the Bay of Bengal and downwind of South and East Asia.

  2. The Organic Aerosols of Titan's Atmosphere

    Science.gov (United States)

    Sotin, Christophe; Lawrence, Kenneth; Beauchamp, Patricia M.; Zimmerman, Wayne

    2012-01-01

    One of Titan's many characteristics is the presence of a haze that veils its surface. This haze is composed of heavy organic particles and determining the chemical composition of these particles is a primary objective for future probes that would conduct in situ analysis. Meanwhile, solar occultations provide constraints on the optical characteristics of the haze layer. This paper describes solar occultation observations obtained by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini spacecraft. These observations strongly constrain the optical characteristics of the haze layer. We detail the different steps involved in the processing of these data and apply them to two occultations that were observed at the South Pole and at the equator in order to investigate the latitudinal dependence of optical properties. The light curves obtained in seven atmospheric windows between 0.933-microns to 5-microns allow us to characterize atmospheric layers from 300 km to the surface. Very good fits of the light curves are obtained using a simple profile of number density of aerosols that is characterized by a scale height. The main difference between the South Pole and the equator is that the value of the scale height increases with altitude at the South Pole whereas it decreases at the equator. The vertically integrated amount of aerosols is similar at the two locations. The curve describing the cross-section versus wavelength is identical at the two locations suggesting that the aerosols have similar characteristics. Finally, we find that the two-way vertical transmission at 5-microns is as large as 80% at both locations.

  3. Fractionation of Stable Isotopes in Atmospheric Aerosol Reactions

    DEFF Research Database (Denmark)

    Meusinger, Carl

    Aerosols - particles suspended in air - are the single largest uncertainty in our current understanding of Earth's climate. They also affect human health, infrastructure and ecosystems. Aerosols are emitted either directly into the atmosphere or are formed there for instance in response to chemical...... reactions and undergo complex chemical and physical changes during their lifetimes. In order to assess processes that form and alter aerosols, information provided by stable isotopes can be used to help constrain estimates on the strength of aerosol sources and sinks. This thesis studies (mass......-independent) fractionation processes of stable isotopes of C, N, O and S in order to investigate three different systems related to aerosols: 1. Post-depositional processes of nitrate in snow that obscure nitrate ice core records 2. Formation and aging of secondary organic aerosol generated by ozonolysis of X...

  4. AEROSOL PARTICLE COLLECTOR DESIGN STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S; Richard Dimenna, R

    2007-09-27

    A computational evaluation of a particle collector design was performed to evaluate the behavior of aerosol particles in a fast flowing gas stream. The objective of the work was to improve the collection efficiency of the device while maintaining a minimum specified air throughput, nominal collector size, and minimal power requirements. The impact of a range of parameters was considered subject to constraints on gas flow rate, overall collector dimensions, and power limitations. Potential improvements were identified, some of which have already been implemented. Other more complex changes were identified and are described here for further consideration. In addition, fruitful areas for further study are proposed.

  5. Aerosol particle formation - meteorological and synoptic processes behind the event

    Energy Technology Data Exchange (ETDEWEB)

    Sogacheva, L.

    2008-07-01

    Aerosol particles in the atmosphere are known to significantly influence ecosystems, to change air quality and to exert negative health effects. Atmospheric aerosols influence climate through cooling of the atmosphere and the underlying surface by scattering of sunlight, through warming of the atmosphere by absorbing sun light and thermal radiation emitted by the Earth surface and through their acting as cloud condensation nuclei. Aerosols are emitted from both natural and anthropogenic sources. Depending on their size, they can be transported over significant distances, while undergoing considerable changes in their composition and physical properties. Their lifetime in the atmosphere varies from a few hours to a week. New particle formation is a result of gas-to-particle conversion. Once formed, atmospheric aerosol particles may grow due to condensation or coagulation, or be removed by deposition processes. In this thesis we describe analyses of air masses, meteorological parameters and synoptic situations to reveal conditions favourable for new particle formation in the atmosphere. We studied the concentration of ultrafine particles in different types of air masses, and the role of atmospheric fronts and cloudiness in the formation of atmospheric aerosol particles. The dominant role of Arctic and Polar air masses causing new particle formation was clearly observed at Hyytiaelae, Southern Finland, during all seasons, as well as at other measurement stations in Scandinavia. In all seasons and on multi-year average, Arctic and North Atlantic areas were the sources of nucleation mode particles. In contrast, concentrations of accumulation mode particles and condensation sink values in Hyytiaelae were highest in continental air masses, arriving at Hyytiaelae from Eastern Europe and Central Russia. The most favourable situation for new particle formation during all seasons was cold air advection after cold-front passages. Such a period could last a few days until the

  6. Indoor and outdoor air ions and aerosol particles in the urban atmosphere of Helsinki: characteristics, sources and formation

    Energy Technology Data Exchange (ETDEWEB)

    Hirsikko, A.; Yli-Juuti, T.; Nieminen, T.; Vartiainen, E.; Laakso, L.; Hussein, T.; Kulmala, M. [Helsinki Univ. (Finland). Dept. of Physical Sciences

    2007-07-01

    We measured air ion size distributions with an air ion spectrometer in the size range of 0.34-40.3 nm both indoors (in July) and outdoors (in August) in Helsinki, Finland in 2004. At the same time we measured particle number concentrations and size distributions with two condensation particle counters (indoors) and differential mobility particle sizer (outdoors). Our main focus was to study new-particle formation in an urban site. We observed new-particle formation indoors almost every day, even many times a day, and four times outdoors. Indoors, the observed growth rates were 2.3-4.9 nm h{sup -1} for 1.3-3-nm ions, 6.5-8.7 nm h{sup -1} for 3-7-nm ions and 5.1-8.7 nm h{sup -1} for 7-20-nm ions. Outdoor ions (3-7 nm) grew at rates as large as 15.4 nm h{sup -1}. Outdoor ion and particle number concentrations were dependent on the wind direction, whereas indoor concentrations were dependent on ventilation conditions. Secondary particle formation and growth affected concentrations both indoors and outdoors. We concluded, based on our measurement results and simulated penetration of outdoor particles through the ventilation system, that we had indoor sources for secondary particles. (orig.)

  7. The colors of biomass burning aerosols in the atmosphere

    Science.gov (United States)

    Liu, Chao; Chung, Chul Eddy; Zhang, Feng; Yin, Yan

    2016-06-01

    Biomass burning aerosols mainly consist of black carbon (BC) and organic aerosols (OAs), and some of OAs are brown carbon (BrC). This study simulates the colors of BrC, BC and their mixture with scattering OAs in the ambient atmosphere by using a combination of light scattering simulations, a two-stream radiative transfer model and a RGB (Red, Green, Blue) color model. We find that both BCs and tar balls (a class of BrC) appear brownish at small particle sizes and blackish at large sizes. This is because the aerosol absorption Ångström exponent (AAE) largely controls the color and larger particles give smaller AAE values. At realistic size distributions, BCs look more blackish than tar balls, but still exhibit some brown color. However, when the absorptance of aerosol layer at green wavelength becomes larger than approximately 0.8, all biomass burning aerosols look blackish. The colors for mixture of purely scattering and absorptive carbonaceous aerosol layers in the atmosphere are also investigated. We suggest that the brownishness of biomass burning aerosols indicates the amount of BC/BrC as well as the ratio of BC to BrC.

  8. Radiation Transfer Model for Aerosol Events in the Earth Atmosphere

    Science.gov (United States)

    Mukai, Sonoyo; Yokomae, Takuma; Nakata, Makiko; Sano, Itaru

    Recently large scale-forest fire, which damages the Earth environment as biomass burning and emission of carbonaceous particles, frequently occurs due to the unstable climate and/or global warming tendency. It is also known that the heavy soil dust is transported from the China continent to Japan on westerly winds, especially in spring. Furthermore the increasing emis-sions of anthropogenic particles associated with continuing economic growth scatter serious air pollutants. Thus atmospheric aerosols, especially in Asia, are very complex and heavy loading, which is called aerosol event. In the case of aerosol events, it is rather difficult to do the sun/sky photometry from the ground, however satellite observation is an effective for aerosol monitoring. Here the detection algorithms from space for such aerosol events as dust storm or biomass burn-ing are dealt with multispectral satellite data as ADEOS-2/GLI, Terra/Aqua/MODIS and/or GOSAT/CAI first. And then aerosol retrieval algorithms are examined based on new radiation transfer code for semi-infinite atmosphere model. The derived space-based results are validated with ground-based measurements and/or model simulations. Namely the space-or surface-based measurements, multiple scattering calculations and model simulations are synthesized together for aerosol retrieval in this work.

  9. Laboratory Experiments and Instrument Intercomparison Studies of Carbonaceous Aerosol Particles

    Energy Technology Data Exchange (ETDEWEB)

    Davidovits, Paul [Boston College, Chestnut Hill, MA (United States)

    2015-10-20

    Aerosols containing black carbon (and some specific types of organic particulate matter) directly absorb incoming light, heating the atmosphere. In addition, all aerosol particles backscatter solar light, leading to a net-cooling effect. Indirect effects involve hydrophilic aerosols, which serve as cloud condensation nuclei (CCN) that affect cloud cover and cloud stability, impacting both atmospheric radiation balance and precipitation patterns. At night, all clouds produce local warming, but overall clouds exert a net-cooling effect on the Earth. The effect of aerosol radiative forcing on climate may be as large as that of the greenhouse gases, but predominantly opposite in sign and much more uncertain. The uncertainties in the representation of aerosol interactions in climate models makes it problematic to use model projections to guide energy policy. The objective of our program is to reduce the uncertainties in the aerosol radiative forcing in the two areas highlighted in the ASR Science and Program Plan. That is, (1) addressing the direct effect by correlating particle chemistry and morphology with particle optical properties (i.e. absorption, scattering, extinction), and (2) addressing the indirect effect by correlating particle hygroscopicity and CCN activity with particle size, chemistry, and morphology. In this connection we are systematically studying particle formation, oxidation, and the effects of particle coating. The work is specifically focused on carbonaceous particles where the uncertainties in the climate relevant properties are the highest. The ongoing work consists of laboratory experiments and related instrument inter-comparison studies both coordinated with field and modeling studies, with the aim of providing reliable data to represent aerosol processes in climate models. The work is performed in the aerosol laboratory at Boston College. At the center of our laboratory setup are two main sources for the production of aerosol particles: (a

  10. Investigation of the utility of laser-secondary neutral mass spectrometry for the detection of polyaromatic hydrocarbons in individual atmospheric aerosol particles.

    Science.gov (United States)

    Tyler, Bonnie J; Dambach, Steffen; Galla, Sebastian; Peterson, Richard E; Arlinghaus, Heinrich F

    2012-01-01

    The distribution of polyaromatic hydrocarbons (PAHs) in ambient aerosol particles is of importance to both human health and climate forcing. Although time-of-flight secondary ion mass spectrometry (ToF-SIMS) has proven useful for studying the distribution of organic compounds in individual aerosol particles, it is difficult to detect PAHs at relevant concentrations in individual aerosol particles because of their low ion yield. In this study, we explore the potential of using laser secondary neutral mass spectrometry (Laser-SNMS) to study three PAHs: pyrene, anthracene, and naphthalene. Because of the high volatility of PAHs, a cryostage was required for the analysis to prevent sublimation of the molecules into the vacuum chamber. We studied two laser systems, a 157 nm excimer laser, which is capable of single-photon ionization of the PAHs, and a 193 nm laser, which requires multiphoton ionization. Under optimized conditions for laser power density and primary ion pulse length, 193 nm postionization resulted in a 2-50-fold increase in ion yield over ToF-SIMS. Using the 157 nm laser, the yield was increased by more than 3 orders of magnitude for all 3 PAHs studied. The single-photon postionization process proved superior in terms of both yield enhancement and reduced fragmentation. By using the optimized 157 nm laser system and a cryostage, we were able to detect PAHs on the surface of 2 μm diameter ambient aerosol particles. PMID:21823569

  11. Aerosol nucleation induced by a high energy particle beam

    DEFF Research Database (Denmark)

    Enghoff, Martin Andreas Bødker; Pedersen, Jens Olaf Pepke; Uggerhøj, Ulrik I.;

    2011-01-01

    We have studied sulfuric acid aerosol nucleation in an atmospheric pressure reaction chamber using a 580 MeV electron beam to ionize the volume of the reaction chamber. We find a clear contribution from ion-induced nucleation and consider this to be the first unambiguous observation of the ion-effect...... on aerosol nucleation using a particle beam under conditions that resemble the Earth's atmosphere. By comparison with ionization using a gamma source we further show that the nature of the ionizing particles is not important for the ion-induced component of the nucleation. This implies that...

  12. SPM analysis of single aerosol particles

    International Nuclear Information System (INIS)

    Aerosol samples were collected using Anderson cascade impact samplers and the dispersed single aerosol particles were embedded in thin PVDF films. A group of single aerosol particles distributed in an area of 180 μm x 150 μm was analyzed by the scanning proton microprobe (SPM). The distributions of 12 elements in the group were mapped with the three dimensional contour technique. Air pollution sources were then analyzed in some details. It is shown that analysis of the group of single aerosol particles by SPM may become a new approach to the study of air pollution

  13. Aerosol-generated mesoporous silicon oxycarbide particles

    International Nuclear Information System (INIS)

    Aerosol-generated mesoporous organosilica submicronic spheres have been converted into porous silicon oxycarbide (SiCO) glasses by pyrolysis at 1000 grad C in an inert atmosphere. Spherical mesoporous particles obtained from acidic solutions of 1,2-bis(triethoxysilyl) ethane and Pluronic F127 structuring agent were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption/desorption, and multi nuclear solid-state magic-angle spinning (MAS) NMR. These particles were then pyrolyzed at 1000 grad C and transformed into a SiCO phase as evidenced by 29Si MAS NMR, while TEM shows preserved mesoporosity, unfortunately difficult to access owing to the presence of an outer layer of dense silica. (authors)

  14. Carbonaceous aerosol particles from common vegetation in the Grand Canyon

    Energy Technology Data Exchange (ETDEWEB)

    Hallock, K.A.; Mazurek, M.A. [Brookhaven National Lab., Upton, NY (United States); Cass, G.R. [California Inst. of Tech., Pasadena, CA (United States). Dept. of Environmental Engineering Science

    1992-05-01

    The problem of visibility reduction in the Grand Canyon due to fine organic aerosol particles in the atmosphere has become an area of increased environmental concern. Aerosol particles can be derived from many emission sources. In this report, we focus on identifying organic aerosols derived from common vegetation in the Grand Canyon. These aerosols are expected to be significant contributors to the total atmospheric organic aerosol content. Aerosol samples from living vegetation were collected by resuspension of surface wax and resin components liberated from the leaves of vegetation common to areas of the Grand Canyon. The samples were analyzed using high-resolution gas chromatography/mass spectrometry (GC/MS). Probable identification of compounds was made by comparison of sample spectra with National Institute of Standards and Technology (NIST) mass spectral references and positive identification of compounds was made when possible by comparison with authentic standards as well as NIST references. Using these references, we have been able to positively identify the presence of n-alkane and n-alkanoic acid homolog series in the surface waxes of the vegetation sampled. Several monoterpenes, sesquiterpenes, and diterpenes were identified also as possible biogenic aerosols which may contribute to the total organic aerosol abundance leading to visibility reduction in the Grand Canyon.

  15. Carbonaceous aerosol particles from common vegetation in the Grand Canyon

    International Nuclear Information System (INIS)

    The problem of visibility reduction in the Grand Canyon due to fine organic aerosol particles in the atmosphere has become an area of increased environmental concern. Aerosol particles can be derived from many emission sources. In this report, we focus on identifying organic aerosols derived from common vegetation in the Grand Canyon. These aerosols are expected to be significant contributors to the total atmospheric organic aerosol content. Aerosol samples from living vegetation were collected by resuspension of surface wax and resin components liberated from the leaves of vegetation common to areas of the Grand Canyon. The samples were analyzed using high-resolution gas chromatography/mass spectrometry (GC/MS). Probable identification of compounds was made by comparison of sample spectra with National Institute of Standards and Technology (NIST) mass spectral references and positive identification of compounds was made when possible by comparison with authentic standards as well as NIST references. Using these references, we have been able to positively identify the presence of n-alkane and n-alkanoic acid homolog series in the surface waxes of the vegetation sampled. Several monoterpenes, sesquiterpenes, and diterpenes were identified also as possible biogenic aerosols which may contribute to the total organic aerosol abundance leading to visibility reduction in the Grand Canyon

  16. FTIR Analysis of Functional Groups in Aerosol Particles

    Science.gov (United States)

    Shokri, S. M.; McKenzie, G.; Dransfield, T. J.

    2012-12-01

    Secondary organic aerosols (SOA) are suspensions of particulate matter composed of compounds formed from chemical reactions of organic species in the atmosphere. Atmospheric particulate matter can have impacts on climate, the environment and human health. Standardized techniques to analyze the characteristics and composition of complex secondary organic aerosols are necessary to further investigate the formation of SOA and provide a better understanding of the reaction pathways of organic species in the atmosphere. While Aerosol Mass Spectrometry (AMS) can provide detailed information about the elemental composition of a sample, it reveals little about the chemical moieties which make up the particles. This work probes aerosol particles deposited on Teflon filters using FTIR, based on the protocols of Russell, et al. (Journal of Geophysical Research - Atmospheres, 114, 2009) and the spectral fitting algorithm of Takahama, et al (submitted, 2012). To validate the necessary calibration curves for the analysis of complex samples, primary aerosols of key compounds (e.g., citric acid, ammonium sulfate, sodium benzoate) were generated, and the accumulated masses of the aerosol samples were related to their IR absorption intensity. These validated calibration curves were then used to classify and quantify functional groups in SOA samples generated in chamber studies by MIT's Kroll group. The fitting algorithm currently quantifies the following functionalities: alcohols, alkanes, alkenes, amines, aromatics, carbonyls and carboxylic acids.

  17. Field and Laboratory Studies of Atmospheric Organic Aerosol

    Science.gov (United States)

    Coggon, Matthew Mitchell

    This thesis is the culmination of field and laboratory studies aimed at assessing processes that affect the composition and distribution of atmospheric organic aerosol. An emphasis is placed on measurements conducted using compact and high-resolution Aerodyne Aerosol Mass Spectrometers (AMS). The first three chapters summarize results from aircraft campaigns designed to evaluate anthropogenic and biogenic impacts on marine aerosol and clouds off the coast of California. Subsequent chapters describe laboratory studies intended to evaluate gas and particle-phase mechanisms of organic aerosol oxidation. The 2013 Nucleation in California Experiment (NiCE) was a campaign designed to study environments impacted by nucleated and/or freshly formed aerosol particles. Terrestrial biogenic aerosol with > 85% organic mass was observed to reside in the free troposphere above marine stratocumulus. This biogenic organic aerosol (BOA) originated from the Northwestern United States and was transported to the marine atmosphere during periodic cloud-clearing events. Spectra recorded by a cloud condensation nuclei counter demonstrated that BOA is CCN active. BOA enhancements at latitudes north of San Francisco, CA coincided with enhanced cloud water concentrations of organic species such as acetate and formate. Airborne measurements conducted during the 2011 Eastern Pacific Emitted Aerosol Cloud Experiment (E-PEACE) were aimed at evaluating the contribution of ship emissions to the properties of marine aerosol and clouds off the coast of central California. In one study, analysis of organic aerosol mass spectra during periods of enhanced shipping activity yielded unique tracers indicative of cloud-processed ship emissions (m/z 42 and 99). The variation of their organic fraction (f42 and f 99) was found to coincide with periods of heavy (f 42 > 0.15; f99 > 0.04), moderate (0.05 chemical and physical evolution of a controlled organic plume emitted from the R/V Point Sur. Under sunny

  18. Secondary aerosol formation from atmospheric reactions of aliphatic amines

    Directory of Open Access Journals (Sweden)

    S. M. Murphy

    2007-01-01

    Full Text Available Although aliphatic amines have been detected in both urban and rural atmospheric aerosols, little is known about the chemistry leading to particle formation or the potential aerosol yields from reactions of gas-phase amines. We present here the first systematic study of aerosol formation from the atmospheric reactions of amines. Based on laboratory chamber experiments and theoretical calculations, we evaluate aerosol formation from reaction of OH, ozone, and nitric acid with trimethylamine, methylamine, triethylamine, diethylamine, ethylamine, and ethanolamine. Entropies of formation for alkylammonium nitrate salts are estimated by molecular dynamics calculations enabling us to estimate equilibrium constants for the reactions of amines with nitric acid. Though subject to significant uncertainty, the calculated dissociation equilibrium constant for diethylammonium nitrate is found to be sufficiently small to allow for its atmospheric formation, even in the presence of ammonia which competes for available nitric acid. Experimental chamber studies indicate that the dissociation equilibrium constant for triethylammonium nitrate is of the same order of magnitude as that for ammonium nitrate. All amines studied form aerosol when photooxidized in the presence of NOx with the majority of the aerosol mass present at the peak of aerosol growth consisting of aminium (R3NH+ nitrate salts, which repartition back to the gas phase as the parent amine is consumed. Only the two tertiary amines studied, trimethylamine and triethylamine, are found to form significant non-salt organic aerosol when oxidized by OH or ozone; calculated organic mass yields for the experiments conducted are similar for ozonolysis (15% and 5% respectively and photooxidation (23% and 8% respectively. The non-salt organic aerosol formed appears to be more stable than the nitrate salts and does not quickly repartition back to the gas phase.

  19. Multiple scattering in a dense aerosol atmosphere

    Directory of Open Access Journals (Sweden)

    S. Mukai

    2012-01-01

    Full Text Available This study was designed to develop an efficient algorithm to retrieve aerosol characteristics in aerosol events, which are associated with dense concentrations of aerosols in the atmosphere, such as a dust storm or a biomass burning plume. The idea of successive scattering of light is reviewed based on the theory of radiative transfer. Then derivation of the method of successive order of scattering (MSOS is interpreted in detail, and it is shown that MSOS is available for a simulation scheme in the dense radiation field being used to retrieve aerosol properties in the event with the high optical thickness. Finally our algorithms are practically applied for the biomass burning aerosol event over the Amazon using Aqua/MODIS data.

  20. Highly time-resolved chemical characterization of atmospheric submicron particles during 2008 Beijing Olympic Games using an Aerodyne High-Resolution Aerosol Mass Spectrometer

    Directory of Open Access Journals (Sweden)

    X.-F. Huang

    2010-05-01

    Full Text Available As part of Campaigns of Air Quality Research in Beijing and Surrounding Region–2008 (CAREBeijing-2008, an Aerodyne High-Resolution Time-of-Flight Aerosol Mass Spectrometer (HR-ToF-AMS was deployed in urban Beijing to characterize submicron aerosol particles during the time of 2008 Beijing Olympic Games and Paralytic Games (24 July to 20 September 2008. The campaign mean PM1 mass concentration was 63.1±39.8 μg m−3; the mean composition consisted of organics (37.9%, sulfate (26.7%, ammonium (15.9%, nitrate (15.8%, black carbon (3.1%, and chloride (0.87%. The average size distributions of the species (except BC were all dominated by an accumulation mode peaking at about 600 nm in vacuum aerodynamic diameter, and organics was characterized by an additional smaller mode extending below 100 nm. Positive Matrix Factorization (PMF analysis of the high resolution organic mass spectral dataset differentiated the organic aerosol into four components, i.e., hydrocarbon-like (HOA, cooking-related (COA, and two oxygenated organic aerosols (OOA-1 and OOA-2, which on average accounted for 18.1, 24.4, 33.7 and 23.7% of the total organic mass, respectively. The HOA was identified to be closely associated with primary combustion sources, while the COA mass spectrum showed high similarity to that measured from cooking aerosol emissions. The OOA components correspond to aged secondary organic aerosol. Although the two OOA components have similar elemental (O/C, H/C compositions, they display differences in mass spectra and time series which appear to correlate with the different source regions sampled during the campaign. Back trajectory clustering analysis indicated that the southerly air flows were associated with the highest PM1 pollution during the campaign. This result is similar to observations made in the summer of 2006, although the average PM1 concentration level for the southerly air flows is 31% lower than

  1. Characteristics of aerosolized ice forming marine biogenic particles

    Science.gov (United States)

    Alpert, Peter A.

    Ice particles are ubiquitous in the atmosphere existing as the sole constituents of glaciated cirrus clouds or coexisting with supercooled liquid droplets in mixed-phase clouds. Aerosol particles serving as heterogeneous ice nuclei for ice crystal formation impact the global radiative balance by modification of cloud radiative properties, and thus climate. Atmospheric ice formation is not a well understood process and represents great uncertainty for climate prediction. The oceans which cover the majority of the earth's surface host nearly half the total global primary productivity and contribute to the greatest aerosol production by mass. However, the effect of biological activity on particle aerosolization, particle composition, and ice nucleation is not well established. This dissertation investigates the link between marine biological activity, aerosol particle production, physical/chemical particle characteristics, and ice nucleation under controlled laboratory conditions. Dry and humidified aerosol size distributions of particles from bursting bubbles generated by plunging water jets and aeration through frits in a seawater mesocosm containing bacteria and/or phytoplankton cultures, were measured as a function of biological activity. Total particle production significantly increases primarily due to enhanced aerosolization of particles ≤100 nm in diameter attributable to the presence and growth of phytoplankton. Furthermore, hygroscopicity measurements indicate primary organic material associated with the sea salt particles, providing additional evidence for the importance of marine biological activity for ocean derived aerosol composition. Ice nucleation experiments show that these organic rich particles nucleate ice efficiently in the immersion and deposition modes, which underscores their importance in mixed-phase and cirrus cloud formation processes. In separate ice nucleation experiments employing pure cultures of Thalassiosira pseudonana, Nannochloris

  2. Ångström coefficient as an indicator of the atmospheric aerosol type for a well-mixed atmospheric boundary layer : Part 1: Model development

    NARCIS (Netherlands)

    Kuśmierczyk-Michulec, J.T.

    2009-01-01

    The physical and optical properties of an atmospheric aerosol mixture depend on a number of factors. The relative humidity influences the size of hydroscopic particles and the effective radius of an aerosol mixture. In consequence, values of the aerosol extinction, the aerosol optical thickness and

  3. Novel Approaches to the Sampling of Atmospheric Aerosols and Determination of Chemical Composition

    OpenAIRE

    Parshintsev, Evgeny

    2011-01-01

    The Earth s climate is a highly dynamic and complex system in which atmospheric aerosols have been increasingly recognized to play a key role. Aerosol particles affect the climate through a multitude of processes, directly by absorbing and reflecting radiation and indirectly by changing the properties of clouds. Because of the complexity, quantification of the effects of aerosols continues to be a highly uncertain science. Better understanding of the effects of aerosols requires more informat...

  4. New satellite project Aerosol-UA: Remote sensing of aerosols in the terrestrial atmosphere

    Science.gov (United States)

    Milinevsky, G.; Yatskiv, Ya.; Degtyaryov, O.; Syniavskyi, I.; Mishchenko, M.; Rosenbush, V.; Ivanov, Yu.; Makarov, A.; Bovchaliuk, A.; Danylevsky, V.; Sosonkin, M.; Moskalov, S.; Bovchaliuk, V.; Lukenyuk, A.; Shymkiv, A.; Udodov, E.

    2016-06-01

    We discuss the development of the Ukrainian space project Aerosol-UA which has the following three main objectives: (1) to monitor the spatial distribution of key characteristics of terrestrial tropospheric and stratospheric aerosols; (2) to provide a comprehensive observational database enabling accurate quantitative estimates of the aerosol contribution to the energy budget of the climate system; and (3) quantify the contribution of anthropogenic aerosols to climate and ecological processes. The remote sensing concept of the project is based on precise orbital measurements of the intensity and polarization of sunlight scattered by the atmosphere and the surface with a scanning polarimeter accompanied by a wide-angle multispectral imager-polarimeter. Preparations have already been made for the development of the instrument suite for the Aerosol-UA project, in particular, of the multi-channel scanning polarimeter (ScanPol) designed for remote sensing studies of the global distribution of aerosol and cloud properties (such as particle size, morphology, and composition) in the terrestrial atmosphere by polarimetric and spectrophotometric measurements of the scattered sunlight in a wide range of wavelengths and viewing directions from which a scene location is observed. ScanPol is accompanied by multispectral wide-angle imager-polarimeter (MSIP) that serves to collect information on cloud conditions and Earth's surface image. Various components of the polarimeter ScanPol have been prototyped, including the opto-mechanical and electronic assemblies and the scanning mirror controller. Preliminary synthetic data simulations for the retrieval of aerosol parameters over land surfaces have been performed using the Generalized Retrieval of Aerosol and Surface Properties (GRASP) algorithm. Methods for the validation of satellite data using ground-based observations of aerosol properties are also discussed. We assume that designing, building, and launching into orbit a multi

  5. New Satellite Project Aerosol-UA: Remote Sensing of Aerosols in the Terrestrial Atmosphere

    Science.gov (United States)

    Milinevsky, G.; Yatskiv, Ya.; Degtyaryov, O.; Syniavskyi, I.; Mishchenko, Michael I.; Rosenbush, V.; Ivanov, Yu.; Makarov, A.; Bovchaliuk, A.; Danylevsky, V.; Sosonkin, M.; Moskalov, S.; Bovchaliuk, V; Lukenyuk, A.; Shymkiv, A.

    2016-01-01

    We discuss the development of the Ukrainian space project Aerosol-UA which has the following three main objectives: (1) to monitor the spatial distribution of key characteristics of terrestrial tropospheric and stratospheric aerosols; (2) to provide a comprehensive observational database enabling accurate quantitative estimates of the aerosol contribution to the energy budget of the climate system; and (3) quantify the contribution of anthropogenic aerosols to climate and ecological processes. The remote sensing concept of the project is based on precise orbital measurements of the intensity and polarization of sunlight scattered by the atmosphere and the surface with a scanning polarimeter accompanied by a wide-angle multispectral imager-polarimeter. Preparations have already been made for the development of the instrument suite for the Aerosol-UA project, in particular, of the multi-channel scanning polarimeter (ScanPol) designed for remote sensing studies of the global distribution of aerosol and cloud properties (such as particle size, morphology, and composition) in the terrestrial atmosphere by polarimetric and spectrophotometric measurements of the scattered sunlight in a wide range of wavelengths and viewing directions from which a scene location is observed. ScanPol is accompanied by multispectral wide-angle imager-polarimeter (MSIP) that serves to collect information on cloud conditions and Earths surface image. Various components of the polarimeter ScanPol have been prototyped, including the opto-mechanical and electronic assemblies and the scanning mirror controller. Preliminary synthetic data simulations for the retrieval of aerosol parameters over land surfaces have been performed using the Generalized Retrieval of Aerosol and Surface Properties (GRASP) algorithm. Methods for the validation of satellite data using ground-based observations of aerosol properties are also discussed. We assume that designing, building, and launching into orbit a multi

  6. Nanoscale Polymeric Particles via Aerosol-Photopolymerization

    OpenAIRE

    Akgün, Ertan

    2015-01-01

    This PhD thesis focuses on the process of aerosol-photopolymerization for the generation of various polymeric particles. Such structures are most often prepared by liquid-based methods via the well-established thermal initiation step, and aerosol-photopolymerization is presented as an alternative, aerosol-based technique which employs photoinitiated polymerization. Discussed within this thesis are the advantages and broad aspects of the process.

  7. Connection between Atmospheric Aerosol, Gaseous Pollutants Concentrations and Atmospheric Stability Parameters

    Czech Academy of Sciences Publication Activity Database

    Zíková, Naděžda

    Praha : Matfyzpress, 2010 - (Šafránková, J.; Pavlů, J.), s. 97-102 ISBN 978-80-7378-141-5. [Week of Doctoral Students 2010. Praha (CZ), 01.06.2010-04.06.2010] Institutional research plan: CEZ:AV0Z40720504 Keywords : atmospheric stability * aerosol particles concentration * gaseous pollutants Subject RIV: CF - Physical ; Theoretical Chemistry

  8. Atmospheric electricity and aerosol-cloud interactions in earth's atmosphere

    Science.gov (United States)

    Manninen, Hanna E.; Tammet, Hannes; Mäkelä, Antti; Haapalainen, Jussi; Mirme, Sander; Nieminen, Tuomo; Franchin, Alessandro; Petäjä, Tuukka; Kulmala, Markku; Hõrrak, Urmas

    2013-05-01

    Firstly, atmospheric ions play an important role in the fair weather electricity in Earth's atmosphere. Small ions, or charged molecular clusters, carry electric currents in the atmosphere. These small ions are continuously present, and their lifetime in lower atmosphere is about one minute. It's essential to find out a connection between the production rate of cluster ions, ion-ion recombination, and ion-aerosol attachment, and their ambient concentrations, in order to understand electrical properties of air. Secondly, atmospheric ions are important for Earth's climate, due to their potential role in secondary aerosol formation, which can lead to increased number of cloud condensation nuclei (CCN), which in turn can change the cloud properties. Our aim is to quantify the connections between these two important roles of air ions based on field observations.

  9. Charging of aerosol and nucleation in atmospheric pressure electrical discharges

    Energy Technology Data Exchange (ETDEWEB)

    Borra, J P [Laboratoire de Physique des Gaz et Plasmas, CNRS-Univ. Paris-Sud, F-91405, SUPELEC, 3 Rue Joliot Curie, Gif-sur-Yvette, F-91192 (France)], E-mail: jp.borra@pgp.u-psud.fr

    2008-12-15

    The paper focuses on applications of atmospheric pressure plasmas (dc corona, streamer, spark and ac dielectric barrier discharges (DBDs)) in aerosol processes for materials and environment. Since aerosol kinematics depends mainly on electric forces acting on charged particles, the two mechanisms of aerosol charging by the collection of ions are presented in corona, post-corona and DBDs. In such defined charging conditions, field and diffusion charging laws are depicted, with respect to applications of controlled kinematics of charged aerosol. Then key parameters controlling the formation by nucleation and the growth by coagulation of particles in plasmas are presented. Sources of vapor leading to nucleated nanoparticles are depicted in atmospheric pressure electrical discharges: (i) when filamentary dc streamer and spark as well as ac-DBDs interact with metal or dielectric surfaces and (ii) when discharges induce reactions with gaseous precursors in volume. In both cases, condensable gaseous species are produced, leading to nano-sized particles by physical and chemical routes of nucleation. The composition, size and structure of primary nanoparticles as well as the final size of agglomerates are related to plasma parameters (energy, number per unit surface and time and thermal gradients around each filament as well as the transit time)

  10. Mass size distribution of particles emitted by diesel engines and determination of the contribution of diesel particles to the atmospheric aerosol in Vienna by using a tracer suitable for activation analysis

    International Nuclear Information System (INIS)

    In Vienna a large fraction of light absorbing aerosols has been found. The traffic could be a source for the high absorption coefficients, since the time dependent absorption coefficients varise similar to the traffic densities. Diesel vehicles have high soot emissions, so they may contribute considerably to light absorption during the summer. The emission factors of the vehicles were estimated by measurements at different motor and driving conditions by the Constant-Volume-Sampling-Method. To determine the size distributions a 10-stage-low pressure impactor with a lower cut size of 0.015 μm aerodynamic particle diameter was used. In order to estimate the contribution of diesel vehicles to the total mass concentrations all diesel fuel sold in Vienna and its vincinity was marked with an organic Dysprosium compound. This rare earth tracer was emitted by vehicles together with the soot particles and collected at eleven stations in Vienna. The filter samples were extracted with diluted HNO3 and the extraction was analysed for Dy by neutron activation analysis. The mass size distributions of the particles and the soot emitted from diesel engines are only slightly influenced by motor and driving parameters. The total mass emissions showed considerable variations, but the mean emission factor obtained from the tests was 2.43 g per litre fuel; knowing also the concentration of the tracer in the fuel, the contribution of diesel particles to the mass of the suspended particulates could be estimated. During the measuring period the contribution was c. 25% to the total mass and c. 40% to the absorbing matter in the atmosphere. (Author)

  11. Atmospheric pressure plasmas for aerosols processes in materials and environment

    OpenAIRE

    Borra, J.P.; Jidenko, N; Bourgeois, E

    2009-01-01

    Abstract The paper highlights applications of some atmospheric pressure plasmas (dc-corona, streamer and spark and ac-Dielectric Barrier Discharges) to aerosol processes for Materials and Environment (filtration, diagnostics). The production of vapor i.e. condensable gaseous species, leads to nano-sized particles by physical and chemical routes of nucleation in these AP plasmas: (i) when dc streamer and spark filamentary discharges as well as ac filamenta...

  12. Spectral Absorption Properties of Atmospheric Aerosols

    Science.gov (United States)

    Bergstrom, R. W.; Pilewskie, P.; Russell, P. B.; Redemann, J.; Bond, T. C.; Quinn, P. K.; Sierau, B.

    2007-01-01

    We have determined the solar spectral absorption optical depth of atmospheric aerosols for specific case studies during several field programs (three cases have been reported previously; two are new results). We combined airborne measurements of the solar net radiant flux density and the aerosol optical depth with a detailed radiative transfer model for all but one of the cases. The field programs (SAFARI 2000, ACE Asia, PRIDE, TARFOX, INTEX-A) contained aerosols representing the major absorbing aerosol types: pollution, biomass burning, desert dust and mixtures. In all cases the spectral absorption optical depth decreases with wavelength and can be approximated with a power-law wavelength dependence (Absorption Angstrom Exponent or AAE). We compare our results with other recent spectral absorption measurements and attempt to briefly summarize the state of knowledge of aerosol absorption spectra in the atmosphere. We discuss the limitations in using the AAE for calculating the solar absorption. We also discuss the resulting spectral single scattering albedo for these cases.

  13. Predicting the dry deposition of atmospheric aerosol particles onto forests using a size-resolved multi-layer second-order closure model

    Science.gov (United States)

    Huang, C.; Launianen, S.; Gronholm, T.; Katul, G. G.

    2013-12-01

    Biological aerosol particles are now receiving significant attention given their role in air quality, climate change, and spreading of allergens and other communicable diseases. A major uncertainty in their quantification is associated with complex transport processes governing their generation and removal inside canopies. It has been known for some time now that the commonly used first-order closure to link mean concentration gradients with turbulent fluxes is problematic. The presence of a mean counter-gradient momentum transport in an open trunk space exemplifies such failure. Here, instead of employing K-theory, a size-resolved second-order multilayer model for dry particle deposition is proposed. The starting point of the proposed model is a particle flux budget in which the production, transport, and dissipation terms are modeled. Because these terms require higher-order velocity statistics, this flux budget is coupled with a conventional second-order closure scheme for the flow field within the canopy sub-layer. The failure of conventional K-theory for particle fluxes are explicitly linked to the onset of a mean counter or zero - gradient flow attributed to a significant particle flux transport term. The relative importance of these terms in the particle flux budget and their effects on the foliage particle collection terms for also discussed for each particle size. The proposed model is evaluated against published multi-level measurements of sized-resolved particle fluxes and mean concentration profiles collected within and above a tall Scots pine forest in Hyytiala, Southern Finland. The main findings are that (1) first-order closure schemes may be still plausible for modeling particle deposition velocity, especially in the particle size range smaller than 1 μm when the turbulent particle diffusivity is estimated from higher order flow statistics; (2) the mechanisms leading to the increased trend of particle deposition velocity with increasing friction

  14. A Computational Study of Acid Catalyzed Aerosol Reactions of Atmospherically Relevant Epoxides

    Science.gov (United States)

    Epoxides are important intermediates of atmospheric isoprene oxidation. Their subsequent reactions in the particle phase lead to the production of organic compounds detected in ambient aerosols. We apply density functional theory to determine the important kinetic factors that ...

  15. Characterization of aerosol particles at the forested site in Lithuania

    Science.gov (United States)

    Rimselyte, I.; Garbaras, A.; Kvietkus, K.; Remeikis, V.

    2009-04-01

    Atmospheric particulate matter (PM), especially fine particles (particles with aerodynamic diameter less than 1 m, PM1), has been found to play an important role in global climate change, air quality, and human health. The continuous study of aerosol parameters is therefore imperative for better understanding the environmental effects of the atmospheric particles, as well as their sources, formation and transformation processes. The particle size distribution is particularly important, since this physical parameter determines the mass and number density, lifetime and atmospheric transport, or optical scattering behavior of the particles in the atmosphere (Jaenicke, 1998). Over the years several efforts have been made to improve the knowledge about the chemical composition of atmospheric particles as a function of size (Samara and Voutsa, 2005) and to characterize the relative contribution of different components to the fine particulate matter. It is well established that organic materials constitute a highly variable fraction of the atmospheric aerosol. This fraction is predominantly found in the fine size mode in concentrations ranging from 10 to 70% of the total dry fine particle mass (Middlebrook et al., 1998). Although organic compounds are major components of the fine particles, the composition, formation mechanism of organic aerosols are not well understood. This is because particulate organic matter is part of a complex atmospheric system with hundreds of different compounds, both natural and anthropogenic, covering a wide range of chemical properties. The aim of this study was to characterize the forest PM1, and investigate effects of air mass transport on the aerosol size distribution and chemical composition, estimate and provide insights into the sources and characteristics of carbonaceous aerosols through analysis ^13C/12C isotopic ratio as a function of the aerosol particles size. The measurements were performed at the Rugšteliškis integrated

  16. Synthesis of nanosized metal particles from an aerosol

    Directory of Open Access Journals (Sweden)

    Srećko R. Stopić

    2013-10-01

    Full Text Available The synthesis of metallic nanoparticles from the precursor solution of salts using the ultrasonic spray pyrolysis method was considered in this work. During the control of process parameters (surface tension and density, the concentration of solution, residence time of aerosol in the reactor, presence of additives, gas flow rate, decomposition temperature of aerosol, type of precursor and working atmosphere it is possible to guide the process in order to obtain powders with such a morphology which satisfies more complex requirements for the desired properties of advanced engineering materials.  Significant advance in the improvement of powder characteristics (lower particles sizes, better spheroidity, higher surface area was obtained by the application of the ultrasonic generator for the preparation of aerosols. Ultrasonic spray pyrolysis is performed by the action of a powerful source of ultrasound on the corresponding precursor solution forming the aerosol with a constant droplet size, which depends on the characteristics of liquid and the frequency of ultrasound. The produced aerosols were transported into the hot reactor, which enables the reaction to occur in a very small volume of a particle and formation of  nanosized powder. Spherical, nanosized particles of metals (Cu, Ag, Au, Co were produced with new and improved physical and chemical characteristics at the IME, RWTH Aachen University. The high costs associated with small quantities of produced nanosized particles represent a limitation of the USP-method. Therefore, scale up of the ultrasonic spray pyrolysis was performed as a final target in the synthesis of nanosized powder.

  17. Measurements of Atmospheric Aerosol Vertical Distributions above Svalbard, Norway using Unmanned Aerial Systems (UAS)

    Science.gov (United States)

    Bates, T. S.; Johnson, J. E.; Stalin, S.; Telg, H.; Murphy, D. M.; Burkhart, J. F.; Quinn, P.; Storvold, R.

    2015-12-01

    Atmospheric aerosol vertical distributions were measured above Svalbard, Norway in April 2015 to investigate the processes controlling aerosol concentrations and radiative effects. The aerosol payload was flown in a NOAA/PMEL MANTA Unmanned Aerial System (UAS) on 9 flights totaling 19 flight hours. Measurements were made of particle number concentration and aerosol light absorption at three wavelengths, similar to those conducted in April 2011 (Bates et al., Atmos. Meas. Tech., 6, 2115-2120, 2013). A filter sample was collected on each flight for analyses of trace elements. Additional measurements in the aerosol payload in 2015 included aerosol size distributions obtained using a Printed Optical Particle Spectrometer (POPS) and aerosol optical depth obtained using a four wavelength miniature Scanning Aerosol Sun Photometer (miniSASP). The data show most of the column aerosol mass and resulting optical depth in the boundary layer but frequent aerosol layers aloft with high particle number concentration (2000 cm-3) and enhanced aerosol light absorption (1 Mm-1). Transport of these aerosol layers was assessed using FLEXPART particle dispersion models. The data contribute to an assessment of sources of BC to the Arctic and potential climate impacts.

  18. Aerosol nucleation induced by a high energy particle beam

    DEFF Research Database (Denmark)

    Enghoff, Martin Andreas Bødker; Pedersen, Jens Olaf Pepke; Uggerhøj, Ulrik I.;

    The effect of ions in aerosol nucleation is a subject where much remains to be discovered. That ions can enhance nucleation has been shown by theory, observations, and experiments. However, the exact mechanism still remains to be determined. One question is if the nature of the ionization affects...... the nucleation. This is an essential question since many experiments have been performed using radioactive sources that ionize differently than the cosmic rays which are responsible for the majority of atmospheric ionization. Here we report on an experimental study of sulphuric acid aerosol nucleation under near...... atmospheric conditions using a 580 MeV electron beam to ionize the volume of the reaction chamber. We find a clear and significant contribution from ion induced nucleation and consider this to be an unambiguous observation of the ion-effect on aerosol nucleation using a particle beam under conditions not far...

  19. Chemical evolution of multicomponent aerosol particles during evaporation

    Science.gov (United States)

    Zardini, Alessandro; Riipinen, Ilona; Pagels, Joakim; Eriksson, Axel; Worsnop, Douglas; Switieckli, Erik; Kulmala, Markku; Bilde, Merete

    2010-05-01

    Atmospheric aerosol particles have an important but not well quantified effect on climate and human health. Despite the efforts made in the last decades, the formation and evolution of aerosol particles in the atmosphere is still not fully understood. The uncertainty is partly due to the complex chemical composition of the particles which comprise inorganic and organic compounds. Many organics (like dicarboxylic acids) can be present both in the gas and in the condensed phase due to their low vapor pressure. Clearly, an understanding of this partition is crucial to address any other issue in atmospheric physics and chemistry. Moreover, many organics are water soluble, and their influence on the properties of aqueous solution droplets is still poorly characterized. The solid and sub-cooled liquid state vapor pressures of some organic compounds have been previously determined by measuring the evaporation rate of single-compound crystals [1-3] or binary aqueous droplets [4-6]. In this work, we deploy the HTDMA technique (Hygroscopicity Tandem Differential Mobility Analyzer) coupled with a 3.5m laminar flow-tube and an Aerosol Mass Spectrometer (AMS) for determining the chemical evolution during evaporation of ternary droplets made of one dicarboxylic acid (succinic acid, commonly found in atmospheric samples) and one inorganic compound (sodium chloride or ammonium sulfate) in different mixing ratios, in equilibrium with water vapor at a fixed relative humidity. In addition, we investigate the evaporation of multicomponent droplets and crystals made of three organic species (dicarboxylic acids and sugars), of which one or two are semi-volatile. 1. Bilde M. and Pandis, S.N.: Evaporation Rates and Vapor Pressures of Individual Aerosol Species Formed in the Atmospheric Oxidation of alpha- and beta-Pinene. Environmental Science and Technology, 35, 2001. 2. Bilde M., et al.: Even-Odd Alternation of Evaporation Rates and Vapor Pressures of C3-C9 Dicarboxylic Acid Aerosols

  20. MATRIX (Multiconfiguration Aerosol TRacker of mIXing state: an aerosol microphysical module for global atmospheric models

    Directory of Open Access Journals (Sweden)

    S. E. Bauer

    2008-10-01

    Full Text Available A new aerosol microphysical module MATRIX, the Multiconfiguration Aerosol TRacker of mIXing state, and its application in the Goddard Institute for Space Studies (GISS climate model (ModelE are described. This module, which is based on the quadrature method of moments (QMOM, represents nucleation, condensation, coagulation, internal and external mixing, and cloud-drop activation and provides aerosol particle mass and number concentration and particle size information for up to 16 mixed-mode aerosol populations. Internal and external mixing among aerosol components sulfate, nitrate, ammonium, carbonaceous aerosols, dust and sea-salt particles are represented. The solubility of each aerosol population, which is explicitly calculated based on its soluble and insoluble components, enables calculation of the dependence of cloud drop activation on the microphysical characterization of multiple soluble aerosol populations.

    A detailed model description and results of box-model simulations of various aerosol population configurations are presented. The box model experiments demonstrate the dependence of cloud activating aerosol number concentration on the aerosol population configuration; comparisons to sectional models are quite favorable. MATRIX is incorporated into the GISS climate model and simulations are carried out primarily to assess its performance/efficiency for global-scale atmospheric model application. Simulation results were compared with aircraft and station measurements of aerosol mass and number concentration and particle size to assess the ability of the new method to yield data suitable for such comparison. The model accurately captures the observed size distributions in the Aitken and accumulation modes up to particle diameter 1 μm, in which sulfate, nitrate, black and organic carbon are predominantly located; however the model underestimates coarse-mode number concentration and size, especially in the marine environment

  1. Composition and formation of organic aerosol particles in the Amazon

    Science.gov (United States)

    Pöhlker, C.; Wiedemann, K.; Sinha, B.; Shiraiwa, M.; Gunthe, S. S.; Artaxo, P.; Gilles, M. K.; Kilcoyne, A. L. D.; Moffet, R. C.; Smith, M.; Weigand, M.; Martin, S. T.; Pöschl, U.; Andreae, M. O.

    2012-04-01

    We applied scanning transmission X-ray microscopy with near edge X-ray absorption fine structure (STXM-NEXAFS) analysis to investigate the morphology and chemical composition of aerosol samples from a pristine tropical environment, the Amazon Basin. The samples were collected in the Amazonian rainforest during the rainy season and can be regarded as a natural background aerosol. The samples were found to be dominated by secondary organic aerosol (SOA) particles in the fine and primary biological aerosol particles (PBAP) in the coarse mode. Lab-generated SOA-samples from isoprene and terpene oxidation as well as pure organic compounds from spray-drying of aqueous solution were measured as reference samples. The aim of this study was to investigate the microphysical and chemical properties of a tropical background aerosol in the submicron size range and its internal mixing state. The lab-generated SOA and pure organic compounds occurred as spherical and mostly homogenous droplet-like particles, whereas the Amazonian SOA particles comprised a mixture of homogeneous droplets and droplets having internal structures due to atmospheric aging. In spite of the similar morphological appearance, the Amazon samples showed considerable differences in elemental and functional group composition. According to their NEXAFS spectra, three chemically distinct types of organic material were found and could be assigned to the following three categories: (1) particles with a pronounced carboxylic acid (COOH) peak similar to those of laboratory-generated SOA particles from terpene oxidation; (2) particles with a strong hydroxy (COH) signal similar to pure carbohydrate particles; and (3) particles with spectra resembling a mixture of the first two classes. In addition to the dominant organic component, the NEXAFS spectra revealed clearly resolved potassium (K) signals for all analyzed particles. During the rainy season and in the absence of anthropogenic influence, active biota is

  2. Fluorescence lifetime imaging of optically levitated aerosol: a technique to quantitatively map the viscosity of suspended aerosol particles.

    Science.gov (United States)

    Fitzgerald, C; Hosny, N A; Tong, H; Seville, P C; Gallimore, P J; Davidson, N M; Athanasiadis, A; Botchway, S W; Ward, A D; Kalberer, M; Kuimova, M K; Pope, F D

    2016-08-21

    We describe a technique to measure the viscosity of stably levitated single micron-sized aerosol particles. Particle levitation allows the aerosol phase to be probed in the absence of potentially artefact-causing surfaces. To achieve this feat, we combined two laser based techniques: optical trapping for aerosol particle levitation, using a counter-propagating laser beam configuration, and fluorescent lifetime imaging microscopy (FLIM) of molecular rotors for the measurement of viscosity within the particle. Unlike other techniques used to measure aerosol particle viscosity, this allows for the non-destructive probing of viscosity of aerosol particles without interference from surfaces. The well-described viscosity of sucrose aerosol, under a range of relative humidity conditions, is used to validate the technique. Furthermore we investigate a pharmaceutically-relevant mixture of sodium chloride and salbutamol sulphate under humidities representative of in vivo drug inhalation. Finally, we provide a methodology for incorporating molecular rotors into already levitated particles, thereby making the FLIM/optical trapping technique applicable to real world aerosol systems, such as atmospheric aerosols and those generated by pharmaceutical inhalers. PMID:27430158

  3. Nuclear analytical techniques applied to characterization of atmospheric aerosols in Amazon Region

    International Nuclear Information System (INIS)

    This work presents the atmospheric aerosols characterization that exist in different regions of Amazon basin. The biogenic aerosol emission by forest, as well as the atmospheric emissions of particulate materials due to biomass burning, were analyzed. Samples of aerosol particles were collected during three years in two different locations of Amazon region using Stacked Unit Filters. In order to study these samples some analytical nuclear techniques were used. The high concentrations of aerosols as a result of biomass burning process were observed in the period of june-september

  4. Development of a Scheimpflug Lidar System for Atmospheric Aerosol Monitoring

    Science.gov (United States)

    Mei, Liang; Brydegaard, Mikkel

    2016-06-01

    This work presents a Scheimpflug lidar system which was employed for atmospheric aerosol monitoring in southern Sweden. Atmospheric aerosol fluctuation was observed around rush-hour. The extinction coefficient over 6 km was retrieved, i.e., 0.15 km-1, by employing the slop-method during the time when the atmosphere was relatively homogenous. The measurements successfully demonstrate the potential of using a Scheimpflug lidar technique for atmospheric aerosol monitoring applications.

  5. Diesel Aerosol Sampling in the Atmosphere

    International Nuclear Information System (INIS)

    The University of Minnesota Center for Diesel Research along with a research team including Caterpillar, Cummins, Carnegie Mellon University, West Virginia University (WVU), Paul Scherrer Institute in Switzerland, and Tampere University in Finland have performed measurements of Diesel exhaust particle size distributions under real-world dilution conditions. A mobile aerosol emission laboratory (MEL) equipped to measure particle size distributions, number concentrations, surface area concentrations, particle bound PAHs, as well as CO 2 and NO x concentrations in real time was built and will be described. The MEL was used to follow two different Cummins powered tractors, one with an older engine (L10) and one with a state-of-the-art engine (ISM), on rural highways and measure particles in their exhaust plumes. This paper will describe the goals and objectives of the study and will describe representative particle size distributions observed in roadway experiments with the truck powered by the ISM engine

  6. Application of PIXE technique to studies on global warming/cooling effect of atmospheric aerosols

    International Nuclear Information System (INIS)

    During the last decade, the importance of global warming has been recognized worldwide. Atmospheric aerosols play an important role in the global warming/cooling effects. The physicochemical properties of aerosol particles are fundamental to understanding such effects. In this study, the PIXE technique was applied to measure the average chemical properties of aerosols. Micro-PIXE was also applied to investigate the mixing state of the individual aerosol particle. The chemical composition data were used to estimate the optical properties of aerosols. The average values of aerosol radiative forcing were -1.53 w/m2 in Kyoto and +3.3 w/m2 in Nagoya, indicating cooling and warming effects respectively. The difference of radiative forcing in the two cities may be caused by the large difference in chemical composition of aerosols

  7. Is Distant Pollution Contaminating Local Air? Analyzing the Origins of Atmospheric Aerosols

    OpenAIRE

    David Geng

    2012-01-01

    Understanding the origin of aerosols in the atmosphere is important because of visual pollution, climate impacts, and deleterious health effects due to the inhalation of fine particles. This research analyzed aerosols characterized by their chloride, sulfate, and nitrate content as a function of size over a 3-month period. Due to wind patterns over coal-burning power plants, a higher concentration of local sulfate pollution was expected. Aerosols were harvested on the Purdue University campus...

  8. Air ion measurements as a source of information about atmospheric aerosols

    Science.gov (United States)

    Hõrrak, Urmas; Mirme, Aadu; Salm, Jaan; Tamm, Eduard; Tammet, Hannes

    The mobility spectra of air ions recorded in the course of routine atmospheric electric measurements contain information about atmospheric aerosols. The mobility spectrum of air ions is correlated with the size spectrum of aerosol particles. Two procedures of conversion (and conversion errors) are considered in this paper assuming the steady state of charge distribution. The first procedure uses the fraction model of the aerosol particle size distribution and algebraic solution of the conversion problem. The second procedure uses the parametric KL model of the particle size distribution and the least square fitting of the mobility measurements. The procedures were tested using simultaneous side-by-side measurements of air ion mobilities and aerosol particle size distributions at a rural site during a monthly period. The comparison of results shows a promising agreement between the measured and calculated size spectra in the common size range. A supplementary information about nanometer particles was obtained from air ion measurements.

  9. Surface Chemistry at Size-Selected Nano-Aerosol Particles

    Science.gov (United States)

    Roberts, Jeffrey

    2005-03-01

    A method has been developed to conduct surface chemistry and extract surface kinetic rates from size-selected aerosol nanoparticles. The measurements encompass broad ranges of particle size, phase, and composition. Results will be presented on the uptake of water by aerosolized soot nanoparticles of radius between 10 and 40 nm. Water uptake was monitored by tandem differential mobility analysis (T-DMA), which is capable of measuring changes in particle diameter as little as 0.2 nm. Soot particles were produced in an ethene diffusion flame and extracted into an atmospheric pressure aerosol flow tube reactor. The particles were subjected to various thermal and oxidative treatments, and the effects of these treatments on the ability of soot to adsorb monolayer quantities of water was determined. The results are important because soot nucleates atmospheric cloud particles. More generally, the results represent one of the first kinetic and mechanistic studies of gas-phase nanoparticle reactivity. Co-author: Henry Ajo, University of Minnesota

  10. Optical and Chemical Properties of Atmospheric Aerosols at Amami Oshima and Fukue Islands in Japan in Spring, 2001

    OpenAIRE

    Ohta,Sachio; Murao, Naoto; Yamagata,Sadamu

    2013-01-01

    The optical and chemical properties of atmospheric aerosols were determined from the ground-based measurements at Amami Oshima in April 2001 during the Asian Atmospheric Particle Environmental Change Studies (APEX) campaign and at Fukue Island in March 2001. At Amami Oshima from April 10 to 16, an aerosol event was observed in which the volume scattering coefficient and sulfate concentration of fine particles increased conspicuously. At the former term of the aerosol event, the single scatter...

  11. VERTICAL DISTRIBUTION OF ATMOSPHERIC AEROSOL CONCENTRATION AT XIANGHE

    Institute of Scientific and Technical Information of China (English)

    Li Xu; Guangyu Shi; Jun Zhou; Yasunobu Iwasaka

    2004-01-01

    This paper summarizes atmospheric aerosol concentrations of 5 stratospheric balloon soundings during the period from 1984 to 1994. Aerosol-rich layers in the troposphere were detected and the causes were analyzed. The main results are as follows: (1) the vertical distribution of the atmospheric aerosol is affected by atmospheric dynamic processes, humidity, etc.; (2) the tropospheric column concentrations of aerosol were 72.2×105, 20.2×105, 20.7×105 and 34.4×105 cm-2 and occupying 81%, 61% and 60% of the 0-to-30 km aerosol column, on Aug. 23, 1984, Aug. 22, 1993,Sept. 12, 1993 and Sept. 15, 1994, respectively; (3) the effect of volcano eruption was still evident in the aerosol profiles,28 and 27 months after the El Chichon and Pinatubo eruption; (4) the aerosol concentration in the troposphere did not decrease at all heights as atmospheric aerosol model.

  12. Simulation of the influence of aerosol particles on Stokes parameters of polarized skylight

    International Nuclear Information System (INIS)

    Microphysical properties and chemical compositions of aerosol particles determine polarized radiance distribution in the atmosphere. In this paper, the influences of different aerosol properties (particle size, shape, real and imaginary parts of refractive index) on Stokes parameters of polarized skylight in the solar principal and almucantar planes are studied by using vector radiative transfer simulations. The results show high sensitivity of the normalized Stokes parameters due to fine particle size, shape and real part of refractive index of aerosols. It is possible to utilize the strength variations at the peak positions of the normalized Stokes parameters in the principal and almucantar planes to identify aerosol types

  13. Holographic interferometry for aerosol particle characterization

    International Nuclear Information System (INIS)

    Using simulations based on Mie theory, this work shows how double-exposure digital holography can be used to measure the change in size of an expanding, or contracting, spherical particle. Here, a single particle is illuminated by a plane wave twice during its expansion: once when the particle is 27λ in radius, and again when it is 47λ. A hologram is formed from each illumination stage from the interference of the scattered and unscattered, i.e., incident, light. The two holograms are then superposed to form a double exposure. By applying the Fresnel–Kirchhoff diffraction theory to the double-exposed hologram, a silhouette-like image of the particle is computationally reconstructed that is superposed with interference fringes. These fringes are a direct result of the change in particle size occurring between the two illumination stages. The study finds that expansion on the scale of ∼6λ is readily discerned from the reconstructed particle image. This work could be important for improved characterization of single and multiple aerosol particles in situ. For example, by illuminating an aerosol particle with infrared light, it may be possible to measure photothermally induced particle expansion, thus providing insight into a particle's material properties simultaneous with an image of the particle. - Highlights: • A computational model to simulate digital holography is developed. • The model is used to image a multi-wavelength sized, expanding spherical particle. • An interferometry technique is described that can measure the particle expansion. • Implications for laboratory-based aerosol particle characterization are described

  14. Seasonal variation and difference of aerosol optical properties in columnar and surface atmospheres over Shanghai

    Science.gov (United States)

    Cheng, Tiantao; Xu, Chen; Duan, Junyan; Wang, Yifan; Leng, Chunpeng; Tao, Jun; Che, Huizheng; He, Qianshan; Wu, Yunfei; Zhang, Renjian; Li, Xiang; Chen, Jianmin; Kong, Lingdong; Yu, Xingna

    2015-12-01

    Aerosol optical properties in columnar and surface atmospheres were measured at an urban station of Shanghai from December 2010 to October 2012, and their seasonal variations and differences were examined. Aerosol optical thickness (AOT) at 500 nm is on average about 0.72 over the entire campaign, relatively higher in spring and summer and lower in autumn and winter. Ångström wavelength exponent (Alfa) mainly distributes in 1.1-1.6 (72%) with an obvious uni-peak pattern, implying that fine particles are primary in the aerosol group. Aerosol single scattering albedo of columnar atmosphere (SSA) at 440 nm experiences a weak seasonal variation with an average of 0.91, indicating that aerosols are mainly composed of particles with relatively higher scattering efficiency. The aerosol volume size distribution shows one fine mode and another coarse mode, with peak radii of 0.15 μm and 3.0 μm, respectively. The volume of fine mode particles is minimum in spring and maximum in summer, while the volume of coarse mode particles is minimum in autumn and maximum in winter. The scattering coefficient (Sc) of aerosols in surface atmosphere is relatively higher in winter and spring, the absorptive coefficient (Ab) is higher in autumn and summer. The SSA of surface atmosphere (SSA-surf) at 532 nm varies weakly over time with a lower deviation, mostly scattering in the range of 0.8-0.95 (82%). Although the disconnection of aerosol properties between columnar and surface atmospheres exists, AOT and Alfa are correlated to some extent with PM2.5 and visibility. However, the difference of SSA and SSA-surf is remarkable about 0.1. Overall, fine particles are dominant in aerosols and contribute to AOT significantly in this city, and their difference between surface and columnar atmospheres is unignored.

  15. Ice Nucleation Activity of Various Agricultural Soil Dust Aerosol Particles

    Science.gov (United States)

    Schiebel, Thea; Höhler, Kristina; Funk, Roger; Hill, Thomas C. J.; Levin, Ezra J. T.; Nadolny, Jens; Steinke, Isabelle; Suski, Kaitlyn J.; Ullrich, Romy; Wagner, Robert; Weber, Ines; DeMott, Paul J.; Möhler, Ottmar

    2016-04-01

    Recent investigations at the cloud simulation chamber AIDA (Aerosol Interactions and Dynamics in the Atmosphere) suggest that agricultural soil dust has an ice nucleation ability that is enhanced up to a factor of 10 compared to desert dust, especially at temperatures above -26 °C (Steinke et al., in preparation for submission). This enhancement might be caused by the contribution of very ice-active biological particles. In addition, soil dust aerosol particles often contain a considerably higher amount of organic matter compared to desert dust particles. To test agricultural soil dust as a source of ice nucleating particles, especially for ice formation in warm clouds, we conducted a series of laboratory measurements with different soil dust samples to extend the existing AIDA dataset. The AIDA has a volume of 84 m3 and operates under atmospherically relevant conditions over wide ranges of temperature, pressure and humidity. By controlled adiabatic expansions, the ascent of an air parcel in the troposphere can be simulated. As a supplement to the AIDA facility, we use the INKA (Ice Nucleation Instrument of the KArlsruhe Institute of Technology) continuous flow diffusion chamber based on the design by Rogers (1988) to expose the sampled aerosol particles to a continuously increasing saturation ratio by keeping the aerosol temperature constant. For our experiments, soil dust was dry dispersed into the AIDA vessel. First, fast saturation ratio scans at different temperatures were performed with INKA, sampling soil dust aerosol particles directly from the AIDA vessel. Then, we conducted the AIDA expansion experiment starting at a preset temperature. The combination of these two different methods provides a robust data set on the temperature-dependent ice activity of various agriculture soil dust aerosol particles with a special focus on relatively high temperatures. In addition, to extend the data set, we investigated the role of biological and organic matter in more

  16. A study on characteristics and sources of winter time atmospheric aerosols in Kyoto and Seoul using PIXE and supplementary analysis

    International Nuclear Information System (INIS)

    Atmospheric aerosols were collected using a two stages filter sampler to classify into the fine and coarse fraction in Kyoto and Seoul in winter season. Elemental concentrations of aerosols were analyzed by PIXE and EAS as well as ion concentrations by IC. Analyzed data were used to source of aerosol particles. (author)

  17. Visible and infrared extinction of atmospheric aerosol in the marine and coastal environment.

    Science.gov (United States)

    Kaloshin, Gennady A

    2011-05-10

    The microphysical model Marine Aerosol Extinction Profiles (MaexPro) for surface layer marine and coastal atmospheric aerosols, which is based on long-term observations of size distributions for 0.01-100 μm particles, is presented. The fundamental feature of the model is a parameterization of amplitudes and widths for aerosol modes of the aerosol size distribution function (ASDF) as functions of fetch and wind speed. The shape of the ASDF and its dependence on meteorological parameters, altitudes above the sea level (H), fetch (X), wind speed (U), and relative humidity is investigated. The model is primarily to characterize aerosols for the near-surface layer (within 25 m). The model is also applicable to higher altitudes within the atmospheric boundary layer, where the change in the vertical profile of aerosol is not very large. In this case, it is only valid for "clean" marine environments, in the absence of air pollution or any other major sources of continental aerosols, such desert dust or smoke from biomass burning. The spectral profiles of the aerosol extinction coefficients calculated by MaexPro are in good agreement with observational data and the numerical results obtained by the well-known Navy Aerosol Model and Advanced Navy Aerosol Model codes. Moreover, MaexPro was found to be an accurate and reliable instrument for investigation of the optical properties of atmospheric aerosols. PMID:21556113

  18. Holographic interferometry for aerosol particle characterization

    Science.gov (United States)

    Berg, Matthew J.; Subedi, Nava R.

    2015-01-01

    Using simulations based on Mie theory, this work shows how double-exposure digital holography can be used to measure the change in size of an expanding, or contracting, spherical particle. Here, a single particle is illuminated by a plane wave twice during its expansion: once when the particle is 27 λ in radius, and again when it is 47 λ. A hologram is formed from each illumination stage from the interference of the scattered and unscattered, i.e., incident, light. The two holograms are then superposed to form a double exposure. By applying the Fresnel-Kirchhoff diffraction theory to the double-exposed hologram, a silhouette-like image of the particle is computationally reconstructed that is superposed with interference fringes. These fringes are a direct result of the change in particle size occurring between the two illumination stages. The study finds that expansion on the scale of ~ 6 λ is readily discerned from the reconstructed particle image. This work could be important for improved characterization of single and multiple aerosol particles in situ. For example, by illuminating an aerosol particle with infrared light, it may be possible to measure photothermally induced particle expansion, thus providing insight into a particle's material properties simultaneous with an image of the particle.

  19. Analysis of atmospheric aerosols by PIXE: the importance of real time and complementary measurements

    International Nuclear Information System (INIS)

    Particle-Induced X-ray Emission (PIXE) has been used for more than 30 yr in many urban and background air pollution studies. The technique has certainly contributed to the understanding of source-receptor relationship for aerosol particles as well as to aerosol physics and chemistry. In the last few years, where aerosol issues were strongly linked to global climate change through the relationship between aerosol and atmospheric radiation points to new challenges in atmospheric sciences, where PIXE could play an important role. Also the recognition for the inter-relationship between aerosol and liquid and gas phases in the atmosphere makes important to integrate PIXE aerosol analysis with other complementary measurements. The use of Nephelometers and Aethalometers to measure scattering and absorption of radiation by aerosol particles can be done in parallel with particle filter collection for PIXE analysis. Parallel measurements of trace gases using traditional monitors as well as with new techniques such as Differential Optical Absorption Spectroscopy (DOAS) that can provide concentration of O3, SO2, NO3, NO2, HCHO, HNO3, Benzene, Toluene, and Xylene, is also important for both urban and remote aerosol studies. They provide information that allows a much richer interpretation of PIXE data. Recently developed instruments that provide real time aerosol data such as the Tapered Element Oscillating Microbalance (TEOM) PM10 monitor and automatic real time organic and elemental carbon analyzers provide extremely useful data to complement PIXE aerosol analysis. The concentrations of trace elements measured by PIXE comprise only 10-30% of the aerosol mass, leaving the organic aerosol characterization and measurement with an important role. The aerosol source apportionment provided by PIXE analysis can be extended with other aerosol measurements such as scattering and absorption, estimating for example, the radiative impact of each discriminated aerosol source. The aerosol

  20. Microbiology and atmospheric processes: chemical interactions of primary biological aerosols

    Directory of Open Access Journals (Sweden)

    L. Deguillaume

    2008-07-01

    Full Text Available This paper discusses the influence of primary biological aerosols (PBA on atmospheric chemistry and vice versa through microbiological and chemical properties and processes. Several studies have shown that PBA represent a significant fraction of air particulate matter and hence affect the microstructure and water uptake of aerosol particles. Moreover, airborne micro-organisms, namely fungal spores and bacteria, can transform chemical constituents of the atmosphere by metabolic activity. Recent studies have emphasized the viability of bacteria and metabolic degradation of organic substances in cloud water. On the other hand, the viability and metabolic activity of airborne micro-organisms depend strongly on physical and chemical atmospheric parameters such as temperature, pressure, radiation, pH value and nutrient concentrations. In spite of recent advances, however, our knowledge of the microbiological and chemical interactions of PBA in the atmosphere is rather limited. Further targeted investigations combining laboratory experiments, field measurements, and modelling studies will be required to characterize the chemical feedbacks, microbiological activities at the air/snow/water interface supplied to the atmosphere.

  1. Unintended consequences of atmospheric injection of sulphate aerosols.

    Energy Technology Data Exchange (ETDEWEB)

    Brady, Patrick Vane; Kobos, Peter Holmes; Goldstein, Barry

    2010-10-01

    Most climate scientists believe that climate geoengineering is best considered as a potential complement to the mitigation of CO{sub 2} emissions, rather than as an alternative to it. Strong mitigation could achieve the equivalent of up to -4Wm{sup -2} radiative forcing on the century timescale, relative to a worst case scenario for rising CO{sub 2}. However, to tackle the remaining 3Wm{sup -2}, which are likely even in a best case scenario of strongly mitigated CO{sub 2} releases, a number of geoengineering options show promise. Injecting stratospheric aerosols is one of the least expensive and, potentially, most effective approaches and for that reason an examination of the possible unintended consequences of the implementation of atmospheric injections of sulphate aerosols was made. Chief among these are: reductions in rainfall, slowing of atmospheric ozone rebound, and differential changes in weather patterns. At the same time, there will be an increase in plant productivity. Lastly, because atmospheric sulphate injection would not mitigate ocean acidification, another side effect of fossil fuel burning, it would provide only a partial solution. Future research should aim at ameliorating the possible negative unintended consequences of atmospheric injections of sulphate injection. This might include modeling the optimum rate and particle type and size of aerosol injection, as well as the latitudinal, longitudinal and altitude of injection sites, to balance radiative forcing to decrease negative regional impacts. Similarly, future research might include modeling the optimum rate of decrease and location of injection sites to be closed to reduce or slow rapid warming upon aerosol injection cessation. A fruitful area for future research might be system modeling to enhance the possible positive increases in agricultural productivity. All such modeling must be supported by data collection and laboratory and field testing to enable iterative modeling to increase the

  2. Atmospheric aerosols in the earth system: a review of interactions and feedbacks

    OpenAIRE

    Carslaw, K. S.; Boucher, O.; Spracklen, D. V.; Mann, G.W.; J. G. L. Rae; Woodward, S.; Kulmala, M.

    2009-01-01

    The natural environment is a major source of atmospheric aerosols, including dust, secondary organic material from terrestrial biogenic emissions, carbonaceous particles from wildfires, and sulphate from marine phytoplankton dimethyl sulphide emissions. These aerosols also have a significant effect on many components of the Earth system such as the atmospheric radiative balance and photosynthetically available radiation entering the biosphere, the supply of nutrients to the ocean, and th...

  3. Atmospheric fallout of sodium combustion aerosols

    International Nuclear Information System (INIS)

    Five sodium combustion product release tests were conducted in the open atmosphere at INEL, Idaho. About 100 kg of sodium was burned in 5 min at 30 m elevation in two of the tests. Fallout distribution and combustion product species determinations were made. The principal fallout occurred near the release point and decreased exponentially as the plume moved downwind. The tests indicated that little fallout of combustion product aerosols occurred beyond a few hundred meters from the source under the given meteorological conditions. 2 refs

  4. Selection of quasi-monodisperse super-micron aerosol particles

    Science.gov (United States)

    Rösch, Michael; Pfeifer, Sascha; Wiedensohler, Alfred; Stratmann, Frank

    2014-05-01

    : Knutson, E. O. and Whitby, K. T.: Aerosol classification by electric mobility: apparatus, theory, and applications. Aerosol Science, 6:443--451, 1975 Raddatz, M., Wiedensohler, A., Wex, H., and Stratmann, F.: Size selection of sub- and super-micron clay mineral kaolinite particles using a custom-built Maxi-DMA. Nucleation and Atmospheric Aerosols, Vol. 1527, AIP Conference Proceedings, pages 457-460. AMER INST PHYSICS, 2013 Boulter, J. E., Cziczo, D. J., Middlebrook, A. M., Thomson, D. S., and Murphy, D. M.: Design and performance of a Pumped Counterflow Virtual Impactor. Aerosol Science and Technology, 40(11): 969-976, 2006 Kulkarni, G., Pekour, M., Afchine, A., Murphy, D. M., and Cziczo, D. J.: Comparison of experimental and numerical studies of the performance characteristics of a pumped counterflow virtual impactor. Aerosol Science and Technology, 45:382-392, 2011

  5. Is PIXE still a useful technique for the analysis of atmospheric aerosols? The LABEC experience

    OpenAIRE

    Lucarelli, F.; Nava, S.; G. Calzolai; Chiari, M; Udisti, R.; Marino, F.

    2011-01-01

    At the 3-MV Tandetron accelerator of LABEC (INFN) an external beam facility is fully dedicated to particle-induced X-ray emission (PIXE) and particle-induced gamma -ray emission (PIGE) measurements of atmospheric aerosol elemental composition. All the elements with Z > 10 are simultaneously detected by PIXE in a few minutes and an automatic system for positioning, changing and scanning of the samples allows the analysis of the aerosol collected by different kinds of devices: long series of da...

  6. The rate of equilibration of viscous aerosol particles

    Science.gov (United States)

    O'Meara, Simon; Topping, David O.; McFiggans, Gordon

    2016-04-01

    The proximity of atmospheric aerosol particles to equilibrium with their surrounding condensable vapours can substantially impact their transformations, fate and impacts and is the subject of vibrant research activity. In this study we first compare equilibration timescales estimated by three different models for diffusion through aerosol particles to assess any sensitivity to choice of model framework. Equilibration times for diffusion coefficients with varying dependencies on composition are compared for the first time. We show that even under large changes in the saturation ratio of a semi-volatile component (es) of 1-90 % predicted equilibration timescales are in agreement, including when diffusion coefficients vary with composition. For condensing water and a diffusion coefficient dependent on composition, a plasticising effect is observed, leading to a decreased estimated equilibration time with increasing final es. Above 60 % final es maximum equilibration times of around 1 s are estimated for comparatively large particles (10 µm) containing a relatively low diffusivity component (1 × 10-25 m2 s-1 in pure form). This, as well as other results here, questions whether particle-phase diffusion through water-soluble particles can limit hygroscopic growth in the ambient atmosphere. In the second part of this study, we explore sensitivities associated with the use of particle radius measurements to infer diffusion coefficient dependencies on composition using a diffusion model. Given quantified similarities between models used in this study, our results confirm considerations that must be taken into account when designing such experiments. Although quantitative agreement of equilibration timescales between models is found, further work is necessary to determine their suitability for assessing atmospheric impacts, such as their inclusion in polydisperse aerosol simulations.

  7. A contribution to the study of atmospheric aerosols in urban, marine and oceanic areas

    International Nuclear Information System (INIS)

    A study of atmospheric aerosols, especially marine aerosols, was carried out, using impactors and nuclepore filters in association with electron microscopy techniques. The performances of the experimental device were first determined carefully and a generator of monodisperse aerosols was built at the laboratory in order to measure the efficiency of the filters used. It was demonstrated that the chief atmospheric particulate constituents could be determined by electron microscopy. The particle-size distribution of oceanic aerosols was next studied on the basis of the results of three measurement campaigns carried out in the Atlantic ocean. In Brest, where urban aerosols more or less affected by the meteorological conditions can be found superimposed to marine aerosols, an assessment was made of the effects of moderate anthropogeneous pollution on marine aerosols as measured in the Atlantic ocean. Two cases of marine aerosol disturbance, the former by an accidental marine pollution, the latter linked to a natural local phenomenon are related and a model of the marine aerosol in the Northern Atlantic ocean is proposed which takes into account the mean particle size spectra, the characteristic parameters of its three-modal distribution and the qualitative analysis of particles. (author)

  8. Single particle characterization using the soot particle aerosol mass spectrometer (SP-AMS

    Directory of Open Access Journals (Sweden)

    A. K. Y. Lee

    2014-06-01

    Full Text Available Understanding the impact of atmospheric black carbon (BC containing particles on human health and radiative forcing requires knowledge of the mixing state of BC, including the characteristics of the materials with which it is internally mixed. In this study, we demonstrate for the first time the capabilities of the Aerodyne Soot-Particle Aerosol Mass Spectrometer equipped with a light scattering module (LS-SP-AMS to examine the mixing state of refractory BC (rBC and other aerosol components in an urban environment (downtown Toronto. K-means clustering analysis was used to classify single particle mass spectra into chemically distinct groups. One resultant cluster is dominated by rBC mass spectral signals (C1+ to C5+ while the organic signals fall into a few major clusters, identified as hydrocarbon-like organic aerosol (HOA, oxygenated organic aerosol (OOA, and cooking emission organic aerosol (COA. A nearly external mixing is observed with small BC particles only thinly coated by HOA (∼28% by mass on average, while over 90% of the HOA-rich particles did not contain detectable amounts of rBC. Most of the particles classified into other inorganic and organic clusters were not significantly associated with BC. The single particle results also suggest that HOA and COA emitted from anthropogenic sources were likely major contributors to organic-rich particles with low to mid-range aerodynamic diameter (dva. The similar temporal profiles and mass spectral features of the organic clusters and the factors from a positive matrix factorization (PMF analysis of the ensemble aerosol dataset validate the conventional interpretation of the PMF results.

  9. Oxalate metal complexes in aerosol particles: implications for the hygroscopicity of oxalate-containing particles

    Directory of Open Access Journals (Sweden)

    T. Furukawa

    2011-05-01

    Full Text Available Atmospheric aerosols have both a direct and an indirect cooling effect that influences the radiative balance at the Earth's surface. It has been estimated that the degree of cooling is large enough to weaken the warming effect of carbon dioxide. Among the cooling factors, secondary organic aerosols (SOA play an important role in the solar radiation balance in the troposphere as SOA can act as cloud condensation nuclei (CCN and extend the lifespan of clouds because of their high hygroscopic and water soluble nature. Oxalic acid is an important component of SOA, and is produced via several formation pathways in the atmosphere. However, it is not certain whether oxalic acid exists as free oxalic acid or as metal oxalate complexes in aerosols, although there is a marked difference in their solubility in water and their hygroscopicity. We employed X-ray absorption fine structure spectroscopy to characterize the calcium (Ca and zinc (Zn in aerosols collected at Tsukuba in Japan. Size-fractionated aerosol samples were collected for this purpose using an impactor aerosol sampler. It was shown that 10–60% and 20–100% of the total Ca and Zn in the finer particles (<2.1 μm were present as Ca and Zn oxalate complexes, respectively. Oxalic acid is hygroscopic and can thus increase the CCN activity of aerosol particles, while complexes with various polyvalent metal ions such as Ca and Zn are not hygroscopic, which cannot contribute to the increase of the CCN activity of aerosols. Based on the concentrations of noncomplexed and metal-complexed oxalate species, we found that most of the oxalic acid is present as metal oxalate complexes in the aerosols, suggesting that oxalic acid does not always increase the hygroscopicity of aerosols in the atmosphere. Similar results are expected for other dicarboxylic acids, such as malonic and succinic acids. Thus, it is advisable that the cooling effect of organic aerosols should be estimated by including the

  10. Influence of Surface Seawater and Atmospheric Conditions on the Ccn Activity of Ocean-Derived Aerosol

    Science.gov (United States)

    Quinn, P.; Bates, T. S.; Russell, L. M.; Frossard, A. A.; Keene, W. C.; Kieber, D. J.; Hakala, J. P.

    2012-12-01

    Ocean-derived aerosols are produced from direct injection into the atmosphere (primary production) and gas-to-particle conversion in the atmosphere (secondary production). These different production mechanisms result in a broad range of particle sizes that has implications for the impact of ocean-derived aerosol on climate. The chemical composition of ocean-derived aerosols is a result of a complex mixture of inorganic sea salt and organic matter including polysaccharides, proteins, amino acids, microorganisms and their fragments, and secondary oxidation products. Both production mechanisms and biological processes in the surface ocean impact the ability of ocean-derived aerosol to act as cloud condensation nuclei (CCN). In addition, CCN activity can be impacted by atmospheric processing that modifies particle size and composition after the aerosol is emitted from the ocean. To understand relationships between production mechanism, surface ocean biology, and atmospheric processing, measurements were made of surface ocean chlorophyll and dissolved organic matter; nascent sea spray aerosol freshly emitted from the ocean surface; and ambient marine aerosol. These measurements were made along the coast of California and in the North Atlantic between the northeast US and Bermuda. These regions include both eutrophic and oligotraphic waters and, thus, provide for observations over a wide range of ocean conditions.

  11. Determination of atmospheric aerosol properties over land using satellite measurements

    NARCIS (Netherlands)

    Kokhanovsky, A.A.; Leeuw, G. de

    2009-01-01

    Mostly, aerosol properties are poorly understood because the aerosol properties are very sparse. The first workshop on the determination of atmospheric aerosol properties over land using satellite measurements is convened in Bremen, Germany. In this workshop, the topics of discussions included a var

  12. Comparison between CARIBIC Aerosol Samples Analysed by Accelerator-Based Methods and Optical Particle Counter Measurements

    OpenAIRE

    B. G. Martinsson; J. Friberg; Andersson, S M; Weigelt, A; Hermann, M.; D. Assmann; J. Voigtländer; C. A. M. Brenninkmeijer; Velthoven, P. J. F.; Zahn, A.

    2014-01-01

    Inter-comparison of results from two kinds of aerosol systems in the CARIBIC (Civil Aircraft for the Regular Investigation of the atmosphere Based on a Instrument Container) passenger aircraft based observatory, operating during intercontinental flights at 9–12 km altitude, is presented. Aerosol from the lowermost stratosphere (LMS), the extra-tropical upper troposphere (UT) and the tropical mid troposphere (MT) were investigated. Aerosol particle volume concentration measur...

  13. Airborne measurements of trace gas and aerosol particle emissions from biomass burning in Amazonia

    OpenAIRE

    Guyon, P; Frank, G. P.; M. Welling; D. Chand; Artaxo, P.; L. Rizzo; Nishioka, G.; Kolle, O.; Fritsch, H.; Silva Dias, M. A. F.; L. V. Gatti; Cordova, A. M.; Andreae, M.O.

    2005-01-01

    As part of the LBA-SMOCC (Large-Scale Biosphere-Atmosphere Experiment in Amazonia – Smoke, Aerosols, Clouds, Rainfall, and Climate) 2002 campaign, we studied the emission of carbon monoxide (CO), carbon dioxide (CO2), and aerosol particles from Amazonian deforestation fires using an instrumented aircraft. Emission ratios for aerosol number (CN) relative to CO (ERCN/CO) fell in the range 14–32 cm-3&nbs...

  14. Transfer of radioactive aerosol from unit shelter in boundary atmosphere layer

    International Nuclear Information System (INIS)

    The evaluation of transfer of radioactive aerosol in boundary atmosphere layer in case of normal conditions of unit Shelter and in ceases of different emergency scenarios was performed. In cases of normal condition of unit Shelter the additional radioactive contamination of surface air in close ChNPP zone is the result of simultaneous activities of two sources: unorganized removal of radioactive aerosols from 'Shelter' gaps and release of aerosol particles through ventilating duct of power block 3 and 4. A software shell was created to implement computation mathematical models to evaluate transfer of radioactive aerosol from unit 'Shelter'

  15. Nuclear track radiography of 'hot' aerosol particles

    CERN Document Server

    Boulyga, S F; Kievets, M K; Lomonosova, E M; Zhuk, I V; Yaroshevich, O I; Perelygin, V P; Petrova, R I; Brandt, R; Vater, P

    1999-01-01

    Nuclear track radiography was applied to identify aerosol 'hot' particles which contain elements of nuclear fuel and fallout after Chernobyl NPP accident. For the determination of the content of transuranium elements in radioactive aerosols the measurement of the alpha-activity of 'hot' particles by SSNTD was used in this work, as well as radiography of fission fragments formed as a result of the reactions (n,f) and (gamma,f) in the irradiation of aerosol filters by thermal neutrons and high energy gamma quanta. The technique allowed the sizes and alpha-activity of 'hot' particles to be determined without extracting them from the filter, as well as the determination of the uranium content and its enrichment by sup 2 sup 3 sup 5 U, sup 2 sup 3 sup 9 Pu and sup 2 sup 4 sup 1 Pu isotopes. Sensitivity of determination of alpha activity by fission method is 5x10 sup - sup 6 Bq per particle. The software for the system of image analysis was created. It ensured the identification of track clusters on an optical imag...

  16. Atmospheric aerosol and gas sensing using Scheimpflug lidar

    Science.gov (United States)

    Mei, Liang; Brydegaard, Mikkel

    2015-04-01

    This work presents a new lidar technique for atmospheric remote sensing based on Scheimpflug principle, which describes the relationship between nonparallel image- and object-planes[1]. When a laser beam is transmitted into the atmosphere, the implication is that the backscattering echo of the entire illuminated probe volume can be in focus simultaneously without diminishing the aperture. The range-resolved backscattering echo can be retrieved by using a tilted line scan or two-dimensional CCD/CMOS camera. Rather than employing nanosecond-pulsed lasers, cascade detectors, and MHz signal sampling, all of high cost and complexity, we have developed a robust and inexpensive atmospheric lidar system based on compact laser diodes and array detectors. We present initial applications of the Scheimpflug lidar for atmospheric aerosol monitoring in bright sunlight, with a 3 W, 808 nm CW laser diode. Kilohertz sampling rates are also achieved with applications for wind speed and entomology [2]. Further, a proof-of-principle demonstration of differential absorption lidar (DIAL) based on the Scheimpflug lidar technique is presented [3]. By utilizing a 30 mW narrow band CW laser diode emitting at around 760 nm, the detailed shape of an oxygen absorption line can be resolved remotely with an integration time of 6 s and measurement cycle of 1 minute during night time. The promising results demonstrated in this work show potential for the Scheimpflug lidar technique for remote atmospheric aerosol and gas sensing, and renews hope for robust and realistic instrumentation for atmospheric lidar sensing. [1] F. Blais, "Review of 20 years of range sensor development," Journal of Electronic Imaging, vol. 13, pp. 231-243, Jan 2004. [2] M. Brydegaard, A. Gebru, and S. Svanberg, "Super resolution laser radar with blinking atmospheric particles - application to interacting flying insects " Progress In Electromagnetics Research, vol. 147, pp. 141-151, 2014. [3] L. Mei and M. Brydegaard

  17. Nuclear analytical techniques applied to the large scale measurements of atmospheric aerosols in the amazon region

    International Nuclear Information System (INIS)

    This work presents the characterization of the atmosphere aerosol collected in different places of the Amazon Basin. We studied both the biogenic emission from the forest and the particulate material which is emitted to the atmosphere due to the large scale man-made burning during the dry season. The samples were collected during a three year period at two different locations in the Amazon, namely the Alta Floresta (MT) and Serra do Navio (AP) regions, using stacked unit filters. These regions represent two different atmospheric compositions: the aerosol is dominated by the forest natural biogenic emission at Serra do Navio, while at Alta Floresta it presents an important contribution from the man-made burning during the dry season. At Alta Floresta we took samples in gold in order to characterize mercury emission to the atmosphere related to the gold prospection activity in Amazon. Airplanes were used for aerosol sampling during the 1992 and 1993 dry seasons to characterize the atmospheric aerosol contents from man-made burning in large Amazonian areas. The samples were analyzed using several nuclear analytic techniques: Particle Induced X-ray Emission for the quantitative analysis of trace elements with atomic number above 11; Particle Induced Gamma-ray Emission for the quantitative analysis of Na; and Proton Microprobe was used for the characterization of individual particles of the aerosol. Reflectancy technique was used in the black carbon quantification, gravimetric analysis to determine the total atmospheric aerosol concentration and Cold Vapor Atomic Absorption Spectroscopy for quantitative analysis of mercury in the particulate from the Alta Floresta gold shops. Ionic chromatography was used to quantify ionic contents of aerosols from the fine mode particulate samples from Serra do Navio. Multivariate statistical analysis was used in order to identify and characterize the sources of the atmospheric aerosol present in the sampled regions. (author)

  18. Organic Aerosols in Rural and Remote Atmospheric Environments: Insights from Aerosol Mass Spectrometry

    Science.gov (United States)

    Zhang, Q.; Jimenez, J.; Ulbrich, I.; Dunlea, E.; Decarlo, P.; Huffman, A.; Allan, J.; Coe, H.; Alfarra, R.; Canagaratna, M.; Onasch, T.; Jayne, J.; Worsnop, D.; Takami, A.; Miyoshi, T.; Shimono, A.; Hatakeyama, S.; Weimer, S.; Demerjian, K.; Drewnick, F.; Schneider, J.; Middlebrook, A.; Bahreini, R.; Cotrell, L.; Griffin, R.; Leaitch, R.; Li, S.; Hayden, K.; Rautiainen, J.

    2006-12-01

    Organic matter usually accounts for a large fraction of the fine particle mass in rural and remote atmospheres. However, little is known about the sources and properties of this material. Here we report findings on the characteristics and the major types of organic aerosols (OA) in urban downwind, high elevation, forested, and marine atmospheres based on analyses of more than 20 highly time resolved AMS datasets sampled from various locations in the mid-latitude Northern Hemisphere. Organic aerosol components are extracted from these datasets using a custom multiple component mass spectral analysis technique and the Positive Matrix Factorization (PMF) method. These components are evaluated according to their extracted mass spectra and correlations to aerosol species, such as sulfate, nitrate, and elemental carbon, and gas-phase tracer compounds, such as CO and NOx. We have identified a hydrocarbon-like organic aerosol (HOA) component similar in mass spectra to the hydrocarbon substances observed at urban locations. We have also identified several oxygenated OA (OOA) components that show different fragmentation patterns and oxygen to carbon ratios in their mass spectra. Two OOA components a highly oxygenated that has mass spectrum resembling that of fulvic acid (a model compound representative for highly processed/oxidized organics in the environment) and a less oxygenated OOA component, whose spectrum is dominated with ions that are mainly associated with carbonyls and alcohols, are very frequently observed at various rural/remote sites. The oxygenated OOA component is more prevalent at downwind sites influenced by urban transport and the less oxygenated shows correlation to biogenic chamber OA at some locations. Compared to the total OOA concentration, HOA is generally very small and accounts for high elevation site (the Whistler Mountain Summit, Canada) of North America. Finally, an attempt will be made to address the relative importance of secondary vs. primary

  19. The electrical charging of inactive aerosols in high ionised atmosphere, the electrical charging of artificial beta radioactive aerosols

    International Nuclear Information System (INIS)

    The electrical properties of aerosols greatly influence their transport and deposition in a containment. In a bipolar ionic atmosphere, a neutral electric charge on aerosols is commonly assumed. However, many studies report a different charge distribution in some situations, like highly ionised atmosphere or in the case of radioactive aerosols. Such situations could arise from a hypothetical accident in a nuclear power plant. Within the framework of safety studies which are carried out at IPSN, our aims were the study of electrical properties of aerosols in highly ionised atmosphere, and the study of artificial radioactive aerosols, in order to suggest experimental validation of available theories. For this purpose, we designed an experimental device that allows us to measure non-radioactive aerosol charge distribution under high gamma irradiation, up to 104 Gy/h. With our experimental device we also studied the properties of small ions in the medium. Our results show a variation of the charge distribution in highly ionised atmosphere. The charge increases with the dose of gamma ray. We have related this variation with the one of the small ions in the gases, according to theoretical prediction. However, the model overestimates slightly our experimental results. In the case of the radioactive aerosols, we have designed an original experimental device, which allows us to study the charge distribution of a 137Cs aerosol. Our results show that the electric charging of such aerosols is strongly dependent on evolution parameters in a containment. So, our results underline a great enhancement of self-charging of particles which are sampled in a confined medium. Our results are qualitatively in agreement with the theoretical model; nevertheless the latter underestimates appreciably the self-charging, owing to the fact that wall effects are not taken into account. (author)

  20. Origins of atmospheric aerosols. Basic concepts on aerosol main physical properties; L`aerosol atmospherique: ses origines quelques notions sur les principales proprietes physiques des aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Renoux, A. [Paris-12 Univ., 94 - Creteil (France). Laboratoire de Physique des aerosols et de transferts des contaminations

    1996-12-31

    Natural and anthropogenic sources of atmospheric aerosols are reviewed and indications of their concentrations and granulometry are given. Calculation of the lifetime of an atmospheric aerosol of a certain size is presented and the various modes of aerosol granulometry and their relations with photochemical and physico-chemical processes in the atmosphere are discussed. The main physical, electrical and optical properties of aerosols are also presented: diffusion coefficient, dynamic mobility and relaxation time, Stokes number, limit rate of fall, electrical mobility, optical diffraction

  1. Vertical profiles of atmospheric fluorescent aerosols observed by a mutil-channel lidar spectrometer system

    Science.gov (United States)

    Huang, Z.; Huang, J.; Zhou, T.; Sugimoto, N.; Bi, J.

    2015-12-01

    Zhongwei Huang1*, Jianping Huang1, Tian Zhou1, Nobuo Sugimoto2, Jianrong Bi1 and Jinsen Shi11Key Laboratory for Semi-Arid Climate Change of the Ministry of Education, College of Atmospheric Sciences, Lanzhou University, Lanzhou, China. 2Atmospheric Environment Division, National Institutes for Environmental Studies, Tsukuba, Japan Email: huangzhongwei@lzu.edu.cn Abstract Atmospheric aerosols have a significant impact on regional and globe climate. The challenge in quantifying aerosol direct radiative forcing and aerosol-cloud interactions arises from large spatial and temporal heterogeneity of aerosol concentrations, compositions, sizes, shape and optical properties (IPCC, 2007). Lidar offers some remarkable advantages for determining the vertical structure of atmospheric aerosols and their related optical properties. To investigate the characterization of atmospheric aerosols (especially bioaerosols) with high spatial and temporal resolution, we developed a Raman/fluorescence/polarization lidar system employed a multi-channel spectrometer, with capabilities of providing measurements of Raman scattering and laser-induced fluorescence excitation at 355 nm from atmospheric aerosols. Meanwhile, the lidar system operated polarization measurements both at 355nm and 532nm wavelengths, aiming to obtain more information of aerosols. It employs a high power pulsed laser and a received telescope with 350mm diameter. The receiver could simultaneously detect a wide fluorescent spectrum about 178 nm with spectral resolution 5.7 nm, mainly including an F/3.7 Crossed Czerny-Turner spectrograph, a grating (1200 gr/mm) and a PMT array with 32 photocathode elements. Vertical structure of fluorescent aerosols in the atmosphere was observed by the developed lidar system at four sites across northwest China, during 2014 spring field observation that conducted by Lanzhou University. It has been proved that the developed lidar could detect the fluorescent aerosols with high temporal and

  2. Constraining the atmospheric composition of the day-night terminators of HD 189733b: Atmospheric retrieval with aerosols

    International Nuclear Information System (INIS)

    A number of observations have shown that Rayleigh scattering by aerosols dominates the transmission spectrum of HD 189733b at wavelengths shortward of 1 μm. In this study, we retrieve a range of aerosol distributions consistent with transmission spectroscopy between 0.3-24 μm that were recently re-analyzed by Pont et al. To constrain the particle size and the optical depth of the aerosol layer, we investigate the degeneracies between aerosol composition, temperature, planetary radius, and molecular abundances that prevent unique solutions for transit spectroscopy. Assuming that the aerosol is composed of MgSiO3, we suggest that a vertically uniform aerosol layer over all pressures with a monodisperse particle size smaller than about 0.1 μm and an optical depth in the range 0.002-0.02 at 1 μm provides statistically meaningful solutions for the day/night terminator regions of HD 189733b. Generally, we find that a uniform aerosol layer provide adequate fits to the data if the optical depth is less than 0.1 and the particle size is smaller than 0.1 μm, irrespective of the atmospheric temperature, planetary radius, aerosol composition, and gaseous molecules. Strong constraints on the aerosol properties are provided by spectra at wavelengths shortward of 1 μm as well as longward of 8 μm, if the aerosol material has absorption features in this region. We show that these are the optimal wavelengths for quantifying the effects of aerosols, which may guide the design of future space observations. The present investigation indicates that the current data offer sufficient information to constrain some of the aerosol properties of HD189733b, but the chemistry in the terminator regions remains uncertain.

  3. Partial Derivative Fitted Taylor Expansion: an efficient method for calculating gas/liquid equilibria in atmospheric aerosol particles – Part 2: Organic compounds

    Directory of Open Access Journals (Sweden)

    D. Topping

    2011-08-01

    Full Text Available A flexible mixing rule is presented which allows the calculation of activity coefficients of organic compounds in a multi-component aqueous solution. Based on the same fitting methodology as a previously published inorganic model (Partial Differential Fitted Taylor series Expansion; PD-FiTE, organic PD-FiTE treats interactions between binary pairs of solutes with polynomials of varying order. Using 13 example compounds extracted from a recent sensitivity study, the framework is benchmarked against the UNIFAC model. For 1000 randomly derived concentration ranges and 10 relative humidities between 10 and 99 %, the average deviation in predicted activity coefficients was calculated to be 3.8 %. Whilst compound specific deviations are present, the median and inter-quartile values across all relative humidity range always fell within ±20 % of the UNIFAC value. Comparisons were made with the UNIFAC model by assuming interactions between solutes can be set to zero within PD-FiTE. In this case, deviations in activity coefficients as low as −40 % and as high as +70 % were found. Both the fully coupled and uncoupled organic PD-FiTE are upto a factor of ≈12 and ≈66 times more efficient than calling the UNIFAC model using the same water content, and ≈310 and ≈1800 times more efficient than an iterative model using UNIFAC. The use of PD-FiTE within a dynamical framework is presented, demonstrating the potential inaccuracy of prescribing fixed negative or positive deviations from ideality when modelling the evolving chemical composition of aerosol particles.

  4. Interpretation of aerosol trace metal particle size distributions

    International Nuclear Information System (INIS)

    Proton-induced X-ray emission (PIXE) analysis is capable of rapid routine determination of 10--15 elements present in amounts greater than or equal to 1 ng simultaneously in aerosol size fractions as collected by single orifice impactors over short periods of time. This enables detailed study of complex relationships between elements detected. Since absolute elemental concentrations may be strongly influenced by meteorological and topographical conditions, it is useful to normalize to a reference element. Comparison between the ratios of concentrations with aerosol and corresponding values for anticipated sources may lead to the identification of important sources for the elements. Further geochemical insights may be found through linear correlation coefficients, regression analysis, and cluster analysis. By calculating correlations for elemental pairs, an indication of the degree of covariance between the elements is obtained. Preliminary results indicate that correlations may be particle size dependent. A high degree of covariance may be caused either by a common source or may only reflect the conservative nature of the aerosol. In a regression analysis, by plotting elemental pairs and estimating the regression coefficients, we may be able to conclude if there is more than one source operating for a given element in a certain size range. Analysis of clustering of several elements, previously investigated for aerosol filter samples, can be applied to the analysis of aerosol size fractions. Careful statistical treatment of elemental concentrations as a function of aerosol particle size may thus yield significant information on the generation, transport and deposition of trace metals in the atmosphere

  5. Ion beam analytical techniques in atmospheric aerosol studies

    International Nuclear Information System (INIS)

    An ion beam analytical facility has been developed for application to atmospheric aerosol samples. It combines Particle-Induced X-ray Emission (PIXE) and Particle Elastic Scattering Analysis (PESA). Elemental concentrations for elements heavier than silicon are determined with PIXE, with minimum detection limits of the order of 1 ng/cm2. Hydrogen, carbon, nitrogen and oxygen are determined with PESA. Minimum detection limits are 100, 15, 10 and 350 ng/cm2, respectively. Evaporative losses during analysis were investigated. The problem mainly applies to the light elements, such as elements present in organic compounds of relatively high saturation vapour pressure. The analytical facility, an external beam setup, allows a helium atmosphere to surround the sample. Quantitative analysis for compounds with saturation vapour pressure below about 10-5 torr (room temperature) is possible. A method for chemical speciation using multi-elemental ion beam techniques and thermography is presented; Ion Beam Thermography (IBT). Utilizing elemental thermal data and stoichiometry, chemical speciation is obtained. The influence of distant aerosol sources in southern Sweden was investigated using a three-station network. Multivariate statistical evaluation, based on SIMCA, revealed an elemental composition size dependence in the accumulation mode. The results indicate that transformation processes are more important than emission sources for the covariation of sulphur. A technique for the identification of outliers in a data set is presented, which is based on a three-step multivariate statistical evaluation. (author)

  6. Formation of the Aerosol of Space Origin in Earth's Atmosphere

    Science.gov (United States)

    Kozak, P. M.; Kruchynenko, V. G.

    2011-01-01

    The problem of formation of the aerosol of space origin in Earth s atmosphere is examined. Meteoroids of the mass range of 10-18-10-8 g are considered as a source of its origin. The lower bound of the mass range is chosen according to the data presented in literature, the upper bound is determined in accordance with the theory of Whipple s micrometeorites. Basing on the classical equations of deceleration and heating for small meteor bodies we have determined the maximal temperatures of the particles, and altitudes at which they reach critically low velocities, which can be called as velocities of stopping . As a condition for the transformation of a space particle into an aerosol one we have used the condition of non-reaching melting temperature of the meteoroid. The simplified equation of deceleration without earth gravity and barometric formula for the atmosphere density are used. In the equation of heat balance the energy loss for heating is neglected. The analytical solution of the simplified equations is used for the analysis.

  7. Atmospheric sulphuric acid and aerosol formation: implications from atmospheric measurements for nucleation and early growth mechanisms

    Directory of Open Access Journals (Sweden)

    S.-L. Sihto

    2006-05-01

    Full Text Available We have investigated the formation and early growth of atmospheric secondary aerosol particles building on atmospheric measurements. The measurements were part of the QUEST 2 campaign which took place in spring 2003 in Hyytiälä (Finland. During the campaign numerous new aerosol particle formation events occurred of which 15 were accompanied by gaseous sulphuric acid measurements. Our detailed analysis of these 15 events is focussed on nucleation and early growth (to a diameter of 3 nm of fresh particles. It revealed that new particle formation seems to be a function of the gaseous sulphuric acid concentration to the power from one to two. The former would be consistent with the recently developed activation theory while the latter would be consistent with the kinetic nucleation theory. We find that some events are dominated by the activation mechanism and some are dominated by the kinetic mechanism. Inferred coefficients for the two nucleation mechanisms are correlated with the product of gaseous sulphuric acid and ammonia concentrations. This indicates that besides gaseous sulphuric acid also ammonia has a role in nucleation. Early growth of fresh particles to a diameter of 3 nm has a mean rate of 1.2 nm/h and is clearly correlated with the gaseous sulphuric acid concentration.

  8. Atmospheric aerosol characterization combining multi-wavelength Raman lidar and MAX-DOAS measurements in Gwanjgu

    Science.gov (United States)

    Chong, Jihyo; Shin, Dong Ho; Kim, Kwang Chul; Lee, Kwon-Ho; Shin, Sungkyun; Noh, Young M.; Müller, Detlef; Kim, Young J.

    2011-11-01

    Integrated approach has been adopted at the ADvanced Environmental Research Center (ADEMRC), Gwangju Institute of Science and Technology (GIST), Korea for effective monitoring of atmospheric aerosol. Various active and passive optical remote sensing techniques such as multi-wavelength (3β+2α+1δ) Raman LIDAR, sun-photometry, MAX-DOAS, and satellite retrieval have been utilized. This integrated monitoring system approach combined with in-situ surface measurement is to allow better characterization of physical and optical properties of atmospheric aerosol. Information on the vertical distribution and microphysical properties of atmospheric aerosol is important for understanding its transport characteristics as well as radiative effect. The GIST multi-wavelength (3β + 2α+1δ) Raman lidar system can measure vertical profiles of optical properties of atmospheric aerosols such as extinction coefficients at 355 and 532nm, particle backscatter coefficients at 355, 532 and 1064 nm, and depolarization ratio at 532nm. The incomplete overlap between the telescope field-of-view and beam divergence of the transmitting laser significantly affects lidar measurement, resulting in higher uncertainty near the surface where atmospheric aerosols of interest are concentrated. Differential Optical Absorption Spectroscopy (DOAS) technique is applied as a complementary tool for the detection of atmospheric aerosols near the surface. The passive Multi-Axis DOAS (MAX-DOAS) technique uses scattered sunlight as a light source from several viewing directions. Recently developed aerosol retrieval algorithm based on O4 slant column densities (SCDs) measured at UV and visible wavelengths has been utilized to derive aerosol information (e.g., aerosol optical depth (AOD) and aerosol extinction coefficients (AECs)) in the lower troposphere. The aerosol extinction coefficient at 356 nm was retrieved for the 0-1 and 1-2 km layers based on the MAX-DOAS measurements using the retrieval algorithm

  9. Nucleation and Atmospheric Aerosols 17th International Conference, Galway, Ireland, 2007

    CERN Document Server

    O'Dowd, Colin D

    2007-01-01

    Atmospheric particles are ubiquitous in the atmosphere: they form the seeds for cloud droplets and they form haze layers, blocking out incoming radiation and contributing to a partial cooling of our climate. They also contribute to poor air quality and health impacts. A large fraction of aerosols are formed from nucleation processes – that is a phase transition from vapour to liquid or solid particles. Examples are the formation of stable clusters about 1 nm in size from molecular collisions and these in turn can grow into larger (100 nm or more) haze particles via condensation to the formation of ice crystals in mixed phase or cold clouds. This book brings together the leading experts from the nucleation and atmospheric aerosols research communities to present the current state-of-the-art knowledge in these related fields. Topics covered are: Nucleation Experiment & Theory, Binary, Homogeneous and Heterogeneous Nucleation, Ion & Cluster Properties During Nucleation, Aerosol Characterisation & P...

  10. Atmospheric aerosol in an urban area: Comparison of measurement instruments and methodologies and pulmonary deposition assessment

    International Nuclear Information System (INIS)

    In March 1995 a measurement campaign of atmospheric aerosol in the Bologna urban area (Italy) was carried out. A transportable laboratory, set up by ENEA (Italian national Agency for New Technologies, Energy and the Environment) Environmental Department (Bologna), was utilized with instruments for measurement of atmospheric aerosol and meteorological parameters. The aim of this campaign was of dual purpose: to characterize aerosol in urban area and to compare different instruments and methodologies of measurements. Mass concentrations measurements, evaluated on a 23-hour period with total filter, PM10 dichotomous sampler and low pressure impactor (LPI Berner), have provided information respectively about total suspended particles, respirable fraction and granulometric parameters of aerosol. Eight meteorologic parameters, number concentration of submicromic fraction of aerosol and mass concentration of micromic fraction have been continually measured. Then, in a daytime period, several number granulometries of atmospheric aerosol have also been estimated by means of diffusion battery system. Results related to different measurement methodologies and granulometric characteristics of aerosol are presented here. Pulmonary deposition of atmospheric aerosol is finally calculated, using granulometries provided by LPI Brener and ICRP 66 human respiratory tract model

  11. High aerosol acidity despite declining atmospheric sulfate concentrations over the past 15 years

    Science.gov (United States)

    Weber, Rodney J.; Guo, Hongyu; Russell, Armistead G.; Nenes, Athanasios

    2016-04-01

    Particle acidity affects aerosol concentrations, chemical composition and toxicity. Sulfate is often the main acid component of aerosols, and largely determines the acidity of fine particles under 2.5 μm in diameter, PM2.5. Over the past 15 years, atmospheric sulfate concentrations in the southeastern United States have decreased by 70%, whereas ammonia concentrations have been steady. Similar trends are occurring in many regions globally. Aerosol ammonium nitrate concentrations were assumed to increase to compensate for decreasing sulfate, which would result from increasing neutrality. Here we use observed gas and aerosol composition, humidity, and temperature data collected at a rural southeastern US site in June and July 2013 (ref. ), and a thermodynamic model that predicts pH and the gas-particle equilibrium concentrations of inorganic species from the observations to show that PM2.5 at the site is acidic. pH buffering by partitioning of ammonia between the gas and particle phases produced a relatively constant particle pH of 0-2 throughout the 15 years of decreasing atmospheric sulfate concentrations, and little change in particle ammonium nitrate concentrations. We conclude that the reductions in aerosol acidity widely anticipated from sulfur reductions, and expected acidity-related health and climate benefits, are unlikely to occur until atmospheric sulfate concentrations reach near pre-anthropogenic levels.

  12. Device for Testing and Calibrating Equipment for Monitoring Atmospheric Contamination by Aerosols

    International Nuclear Information System (INIS)

    A device for aerosol production and entrainment has been designed and built at the Physics Laboratory of the Radiation Protection Section of the Nuclear Studies Centre in Fontenay-aux-Roses for use in experiments with and calibration of various instruments for monitoring atmospheric contamination by radioactive aerosols. The paper describes the device for aerosol production and diffusion and refers to a number of experiments which illustrate its use. The unit consists of an aerosol generator which disperses inside a containment aerosols produced by drying a saline solution in dry air. The aerosols in the homogenization container have a definite and reproducible particle size. The concentration of natural daughter products of radon can be varied within certain limits. The first checks of aerosol particle size were made with a cascade impactor. Testing with a slit impactor can be used for checking on the collection of plutonium aerosols, while various other instruments with a mobile filter were tested with beta-emitting aerosols. The testing device can also be used for studying the distribution of aerosols on fixed filters and for investigating deposits in pipelines and sampling containers. (author)

  13. In situ measurements of gas/particle-phase transitions for atmospheric semivolatile organic compounds

    OpenAIRE

    Williams, Brent J.; Goldstein, Allen H.; Kreisberg, Nathan M.; Hering, Susanne V.

    2010-01-01

    An understanding of the gas/particle-phase partitioning of semivolatile compounds is critical in determining atmospheric aerosol formation processes and growth rates, which in turn affect global climate and human health. The Study of Organic Aerosol at Riverside 2005 campaign was performed to gain a better understanding of the factors responsible for aerosol formation and growth in Riverside, CA, a region with high concentrations of secondary organic aerosol formed through the phase transfer ...

  14. Secondary organic aerosol importance in the future atmosphere

    International Nuclear Information System (INIS)

    In order to investigate the secondary organic aerosol (SOA) response to changes in biogenic volatile organic compounds (VOC) emissions in the future atmosphere and how important will SOA be relative to the major anthropogenic aerosol component (sulfate), the global three-dimensional chemistry/transport model TM3 has been used. Emission estimates of biogenic VOC (BVOC) and anthropogenic gases and particles from the literature for the year 2100 have been adopted. According to our present-day model simulations, isoprene oxidation produces 4.6 Tg SOA yr-1, that is less than half of the 12.2 Tg SOA yr-1 formed by the oxidation of other BVOC. In the future, nitrate radicals and ozone become more important than nowadays, but remain minor oxidants for both isoprene and aromatics. SOA produced by isoprene is estimated to almost triple, whereas the production from other BVOC more than triples. The calculated future SOA burden change, from 0.8 Tg at present to 2.0 Tg in the future, is driven by changes in emissions, oxidant levels and pre-existing particles. The non-linearity in SOA formation and the involved chemical and physical feedbacks prohibit the quantitative attribution of the computed changes to the above-mentioned individual factors. In 2100, SOA burden is calculated to exceed that of sulfate, indicating that SOA might become more important than nowadays. These results critically depend on the biogenic emissions and thus are subject to the high uncertainty associated with these emissions estimated due to the insufficient knowledge on plant response to carbon dioxide changes. Nevertheless, they clearly indicate that the change in oxidants and primary aerosol caused by human activities can contribute as much as the change in BVOC emissions to the increase of the biogenic SOA production in the future atmosphere. (authors)

  15. Aerosol dynamics and the synthesis of fine solid particles

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyaya, R.; Lall, A.A.; Friedlander, S.K. [University of California in Los Angeles, Los Angeles, CA (USA). Dept. of Chemical Engineering

    2004-01-26

    Aerosol dynamics (AD) is the discipline that deals with changes in particle size distributions in space and time. AD is based on (1) certain fundamental principles embodied in a set of equations, (2) experimental methods and instrumentation and (3) numerical and computational methods. Over the last few decades, AD has emerged as an enabling discipline in the design of aerosol reactors employed in the gas phase synthesis of fine powders, the characterization of particle emissions from sources such as coal-fired power plants and the atmospheric aerosol. The development of basic AD concepts since early in the 20th century is traced to the present. Major gaps that remain in the field and likely advances over the next few years are discussed. Although accurate predictions of particle size from first principles are difficult to make in practical applications, AD principles can be used to explain trends in product properties for flame and laser ablation reactors that operate under very different temperatures and quench rates.

  16. EVALUATION OF OPTICAL PROPERTIES OF ATMOSPHERIC AEROSOLS BASED ON CHEMICAL CHARACTERIZATION

    OpenAIRE

    Ohta,Sachio; Murao, Naoto

    1998-01-01

    研究概要:Atmospheric fine particles, aerosols less than 2μm in diameter, were collected on filters and chemically analyzed in Sapporo, Okinawa island in Japan and Ester-Dome, Alaska in U. S. A. They were made up of nine components such as elemental carbon, organics, sulfate, nitrate, ammonium, sea-salt cations, soil and water. Based on the chemical characterization, it was assumed that atmospheric aerosols comprise seven species of particles such as elemental carbon, organics, ammonium sulfate, a...

  17. Problems in characterizing atmospheric aerosols by lidar alone

    International Nuclear Information System (INIS)

    In this paper the scattering properties of real atmospheric aerosols as they relate to laser radar measurements are reviewed. Theoretical approximations for modelling lidar experiments and laboratory measurements for characterizing real aerosols are discussed. In the first category the Mueller algebra and Stokes vectors; approximations for the single scattering properties of various aerosols; the information content of the Mueller or scattering matrix and related limitations of lidar measurements; and the effects of multiple scattering on lidar returns are reviewed. In the second category polar nephelometers; calibration procedures for nephelometers; and characterization of the scattering medium are reviewed. The outstanding problems in measuring the atmospheric aerosols by lidar alone are summarized

  18. Backscatter lidar measurement of aerosol stratification in the atmosphere

    OpenAIRE

    Martucci, Giovanni; Thomann, Pierre

    2007-01-01

    The atmospheric aerosol, its stratification and the principal dynamics controlling the air exchange at the top and the base of the aerosol layers are of key importance for understanding critical atmospheric phenomena such as the transport and impact of air pollution, the destruction of the ozone layer and the evolution of the greenhouse effect. In particular, it is the detection of stratification within the atmospheric boundary layer, the lower Troposphere and the regions around the Tropopaus...

  19. Laboratory Studies of Processing of Carbonaceous Aerosols by Atmospheric Oxidants/Hygroscopicity and CCN Activity of Secondary & Processed Primary Organic Aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Ziemann, P.J.; Arey, J.; Atkinson, R.; Kreidenweis, S.M.; Petters, M.D.

    2012-06-13

    The atmosphere is composed of a complex mixture of gases and suspended microscopic aerosol particles. The ability of these particles to take up water (hygroscopicity) and to act as nuclei for cloud droplet formation significantly impacts aerosol light scattering and absorption, and cloud formation, thereby influencing air quality, visibility, and climate in important ways. A substantial, yet poorly characterized component of the atmospheric aerosol is organic matter. Its major sources are direct emissions from combustion processes, which are referred to as primary organic aerosol (POA), or in situ processes in which volatile organic compounds (VOCs) are oxidized in the atmosphere to low volatility reaction products that subsequent condense to form particles that are referred to as secondary organic aerosol (SOA). POA and VOCs are emitted to the atmosphere from both anthropogenic and natural (biogenic) sources. The overall goal of this experimental research project was to conduct laboratory studies under simulated atmospheric conditions to investigate the effects of the chemical composition of organic aerosol particles on their hygroscopicity and cloud condensation nucleation (CCN) activity, in order to develop quantitative relationships that could be used to more accurately incorporate aerosol-cloud interactions into regional and global atmospheric models. More specifically, the project aimed to determine the products, mechanisms, and rates of chemical reactions involved in the processing of organic aerosol particles by atmospheric oxidants and to investigate the relationships between the chemical composition of organic particles (as represented by molecule sizes and the specific functional groups that are present) and the hygroscopicity and CCN activity of oxidized POA and SOA formed from the oxidation of the major classes of anthropogenic and biogenic VOCs that are emitted to the atmosphere, as well as model hydrocarbons. The general approach for this project was

  20. Tracking Water Diffusion Fronts in a Highly Viscous Aerosol Particle

    Science.gov (United States)

    Bastelberger, Sandra; Krieger, Ulrich; Peter, Thomas

    2016-04-01

    Field measurements indicate that atmospheric secondary aerosol particles can be present in a highly viscous, glassy state [1]. In contrast to liquid state particles, the gas phase equilibration is kinetically limited and governed by condensed phase diffusion. In recent water diffusion experiments on highly viscous single aerosol particles levitated in an electrodynamic balance (EDB) we observed a characteristic shift behavior of the Mie whispering gallery modes (WGM) indicative of the changing radial structure of the particle, thus providing us with an experimental method to track the diffusion process inside the particle. When a highly viscous, homogeneous particle is exposed to an abrupt increase in relative humidity, the rapid gas phase diffusion and strong concentration dependence of the diffusion coefficient in the condensed phase lead to extremely steep water concentration gradients inside the particle, reminiscent of diffusion fronts. The resulting quasi step-like concentration profile motivates the introduction of a simple core-shell model describing the morphology of the non-equilibrium particle during humidification. The subsequent particle growth and reduction of the shell refractive index can be observed as red and blueshift behavior of the WGM, respectively. The shift pattern can be attributed to a core-shell radius ratio and particle radius derived from model calculations [2]. If supplemented with growth information obtained from the WGM redshift and thermodynamic equilibrium data, we can infer a comprehensive picture of the time evolution of the diffusion fronts in the framework of our core-shell model. The measured time dependent concentration profile is then compared with simulations solving the non-linear diffusion equation [3] [1] Virtanen, A., et al., Nature, 467, 824-827, 2010 [2] Kaiser, T., Schweiger, G., Computers in Physics, Vol. 7, No. 6, 682-686, Nov/Dec 1993 [3] Zobrist, B., Soonsin, V., Luo, B.P., Peter, T. et al., Phys. Chem. Chem

  1. Remote monitoring of atmospheric aerosol properties by using a multi-wavelength lidar system at Kwangju, Korea

    International Nuclear Information System (INIS)

    A multi-wavelength lidar system that can measure simultaneously spectral aerosol extinction coefficient and depolarization ratio has been developed and tested. Some results from lidar measurements aerosol extinction coefficient, lidar ratio, and depolarization ratio of aerosols are presented. Lidar transmit system generates 20 Hz laser pulses at 355 nm, 532 nm, and 1064 nm with an Nd;YAG laser. Backscattered light from atmospheric aerosol particles is collected with three Cassegrain type telescopes. Signal detection unit has 7-channels consisting of two 532 nm channels and one 1064 nm channel for measuring the stratospheric aerosols, two 532 nm channels for tropospheric aerosols, 387 nm channel for Raman scattering measurements. Aerosol observation has been conducted since December 2002 at Kwangju (35 .deg. 10'N, 126 .deg. 53'), Korea. Raman channel permitted better determination of optical properties of continental aerosols. The profile of the depolarization ratio is determined at 532 nm and used to investigate particle shape.

  2. Sources and composition of urban aerosol particles

    Science.gov (United States)

    Vogt, M.; Johansson, C.; Mårtensson, M.; Struthers, H.; Ahlm, L.; Nilsson, D.

    2011-09-01

    From May 2008 to March 2009 aerosol emissions were measured using the eddy covariance method covering the size range 0.25 to 2.5 μm diameter (Dp) from a 105 m tower, in central Stockholm, Sweden. Supporting chemical aerosol data were collected at roof and street level. Results show that the inorganic fraction of sulfate, nitrate, ammonium and sea salt accounts for approximately 15% of the total aerosol mass water soluble soil contributing 11% and water insoluble soil 47%. Carbonaceous compounds were at the most 27% of PM1 mass. It was found that heating the air from the tower to 200 °C resulted in the loss of approximately 60% of the aerosol volume at 0.25 μm Dp whereas only 40% of the aerosol volume was removed at 0.6 μm Dp. Further heating to 300 °C caused very little additional losses roof level in the city, supporting the assumption that the non-volatile material consists of carbonaceous compounds. The average diurnal cycles of the BC emissions from road traffic (as inferred from the ratio of the incremental concentrations of nitrogen oxides (NOx) and BC measured on a densely trafficked street) and the fluxes of non-volatile material at tower level are in close agreement, suggesting a traffic source of BC. We have estimated the emission factors (EFs) for non-volatile particles <0.6 μm Dp to be 2.4±1.4 mg veh-1 km-1 based on either CO2 fluxes or traffic activity data. Light (LDV) and heavy duty vehicle (HDV) EFs were estimated using multiple linear regression and reveal that for non-volatile particulate matter in the 0.25 to 0.6 μm Dp range, the EFHDV is approximately twice as high as the EFLDV, the difference not being statistically significant.

  3. Single-particle Analyses of Compositions, Morphology, and Viscosity of Aerosol Particles Collected During GoAmazon2014

    Science.gov (United States)

    Adachi, K.; Gong, Z.; Bateman, A. P.; Martin, S. T.; Cirino, G. G.; Artaxo, P.; Sedlacek, A. J., III; Buseck, P. R.

    2014-12-01

    Single-particle analysis using transmission electron microscopy (TEM) shows composition and morphology of individual aerosol particles collected during the GoAmazon2014 campaign. These TEM results indicate aerosol types and mixing states, both of which are important for evaluating particle optical properties and cloud condensation nuclei activity. The samples were collected at the T3 site, which is located in the Amazon forest with influences from the urban pollution plume from Manaus. Samples were also collected from the T0 site, which is in the middle of the jungle with minimal to no influences of anthropogenic sources. The aerosol particles mainly originated from 1) anthropogenic pollution (e.g., nanosphere soot, sulfate), 2) biogenic emissions (e.g., primary biogenic particles, organic aerosols), and 3) long-range transport (e.g., sea salts). We found that the biogenic organic aerosol particles contain homogeneously distributed potassium. Particle viscosity is important for evaluating gas-particle interactions and atmospheric chemistry for the particles. Viscosity can be estimated from the rebounding behavior at controlled relative humidities, i.e., highly viscous particles display less rebound on a plate than low-viscosity particles. We collected 1) aerosol particles from a plate (non-rebounded), 2) those that had rebounded from the plate and were then captured onto an adjacent sampling plate, and 3) particles from ambient air using a separate impactor sampler. Preliminary results show that more than 90% of non-rebounded particles consisted of nanosphere soot with or without coatings. The coatings mostly consisted of organic matter. Although rebounded particles also contain nanosphere soot (number fraction 64-69%), they were mostly internally mixed with sulfate, organic matter, or their mixtures. TEM tilted images suggested that the rebounded particles were less deformed on the substrate, whereas the non-rebounded particles were more deformed, which could

  4. The study on differentiated particle size sampling technology of aerosols

    International Nuclear Information System (INIS)

    This article introduces basic principle of differentiated particle size sampling technology of aerosols. This sampling technology is used to conduct a experimental research on the aerosols particles size distribution of uranium and radon and it's daughters. Experimental results showed that the part of radon and it's daughters aerosols particles size smaller than 0.43 μm reached 76.4%. The part of radon and it's daughters aerosols particles size less than 1 μm reached 96.3%. The part of uranium aerosol particles size larger than 4.7 μm under specific conditions is 94%, the part of aerosol particles size larger than 10 μm is 72%. According to the experiment's result, we designed a new sampling equipments that cutting size is 1 μm to collect samples of aerosols, and it is used in the separation efficiency experiments of 241Am aerosols. Experimental results showed that the separation efficiency of 241Am aerosols can reach 94.2%. Thus, using the differentiated particle size sampling technology to collect samples of plutonium aerosols, in the sampling process can reduce the effect of natural background aerosols. (authors)

  5. Chemical characterization of atmospheric particles

    International Nuclear Information System (INIS)

    In the characterisation of complex environmental materials such as atmospheric particulate matter, analytical specificity is required to account for the many dimensions of information present in the sample. These dimensions include size, morphology, elemental composition, inorganic and organic chemical speciation, all to be performed on either single particles or on the population (or bulk sample) basis. Various techniques were developed for such measurements, including a number of bulk analysis procedures, methodologies for microscopical analysis of individual particles, and a variety of procedures for organic/inorganic chemical speciation. (author)

  6. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles - Part 1: Principle of measurements and instrument evaluation

    Science.gov (United States)

    Renard, Jean-Baptiste; Dulac, François; Berthet, Gwenaël; Lurton, Thibaut; Vignelles, Damien; Jégou, Fabrice; Tonnelier, Thierry; Jeannot, Matthieu; Couté, Benoit; Akiki, Rony; Verdier, Nicolas; Mallet, Marc; Gensdarmes, François; Charpentier, Patrick; Mesmin, Samuel; Duverger, Vincent; Dupont, Jean-Charles; Elias, Thierry; Crenn, Vincent; Sciare, Jean; Zieger, Paul; Salter, Matthew; Roberts, Tjarda; Giacomoni, Jérôme; Gobbi, Matthieu; Hamonou, Eric; Olafsson, Haraldur; Dagsson-Waldhauserova, Pavla; Camy-Peyret, Claude; Mazel, Christophe; Décamps, Thierry; Piringer, Martin; Surcin, Jérémy; Daugeron, Daniel

    2016-04-01

    The study of aerosols in the troposphere and in the stratosphere is of major importance both for climate and air quality studies. Among the numerous instruments available, optical aerosol particles counters (OPCs) provide the size distribution in diameter range from about 100 nm to a few tens of µm. Most of them are very sensitive to the nature of aerosols, and this can result in significant biases in the retrieved size distribution. We describe here a new versatile optical particle/sizer counter named LOAC (Light Optical Aerosol Counter), which is light and compact enough to perform measurements not only at the surface but under all kinds of balloons in the troposphere and in the stratosphere. LOAC is an original OPC performing observations at two scattering angles. The first one is around 12°, and is almost insensitive to the refractive index of the particles; the second one is around 60° and is strongly sensitive to the refractive index of the particles. By combining measurement at the two angles, it is possible to retrieve the size distribution between 0.2 and 100 µm and to estimate the nature of the dominant particles (droplets, carbonaceous, salts and mineral particles) when the aerosol is relatively homogeneous. This typology is based on calibration charts obtained in the laboratory. The uncertainty for total concentrations measurements is ±20 % when concentrations are higher than 1 particle cm-3 (for a 10 min integration time). For lower concentrations, the uncertainty is up to about ±60 % for concentrations smaller than 10-2 particle cm-3. Also, the uncertainties in size calibration are ±0.025 µm for particles smaller than 0.6 µm, 5 % for particles in the 0.7-2 µm range, and 10 % for particles greater than 2 µm. The measurement accuracy of submicronic particles could be reduced in a strongly turbid case when concentration of particles > 3 µm exceeds a few particles cm-3. Several campaigns of cross-comparison of LOAC with other particle counting

  7. Atmospheric aerosols at the Pierre Auger Observatory and environmental implications

    CERN Document Server

    Louedec, K

    2012-01-01

    The Pierre Auger Observatory detects the highest energy cosmic rays. Calorimetric measurements of extensive air showers induced by cosmic rays are performed with a fluorescence detector. Thus, one of the main challenges is the atmospheric monitoring, especially for aerosols in suspension in the atmosphere. Several methods are described which have been developed to measure the aerosol optical depth profile and aerosol phase function, using lasers and other light sources as recorded by the fluorescence detector. The origin of atmospheric aerosols traveling through the Auger site is also presented, highlighting the effect of surrounding areas to atmospheric properties. In the aim to extend the Pierre Auger Observatory to an atmospheric research platform, a discussion about a collaborative project is presented.

  8. Atmospheric Aerosol Attenuation Measurements at the Pierre Auger Observatory

    CERN Document Server

    Valore, Laura

    2014-01-01

    The Fluorescence Detector (FD) of the Pierre Auger Observatory provides a nearly calorimetric measurement of the primary particle energy, since the fluorescence light produced is proportional to the energy dissipated by an Extensive Air Shower (EAS) in the atmosphere. The atmosphere therefore acts as a giant calorimeter, whose properties need to be well known during data taking. Aerosols play a key role in this scenario, since their effect on light transmission is highly variable even on a time scale of one hour, and the corresponding correction to EAS energy can range from a few percent to more than 40%. For this reason, hourly Vertical Aerosol Optical Depth (taer(h)) profiles are provided for each of the four FD stations. Starting from 2004, up to now 9 years of taer(h) profiles have been produced using data from the Central Laser Facility (CLF) and the eXtreme Laser Facility (XLF) of the Pierre Auger Observatory. The two laser facilities, the techniques developed to measure taer(h) profiles using laser dat...

  9. Oxidation Products of Biogenic Emissions Contribute to Nucleation of Atmospheric Particles

    OpenAIRE

    Riccobono, F.; Schobesberger, S.; Scott, CE; Dommen, J; Ortega, IK; L. Rondo; Almeida, J; Amorim, A.; BIANCHI, F.; Breitenlechner, M.; David, A.(CERN, European Organization for Nuclear Research, Geneva, Switzerland); Downard, A.; Dunne, EM; J. Duplissy; S. Ehrhart

    2014-01-01

    Atmospheric new-particle formation affects climate and is one of the least understood atmospheric aerosol processes. The complexity and variability of the atmosphere has hindered elucidation of the fundamental mechanism of new-particle formation from gaseous precursors. We show, in experiments performed with the CLOUD (Cosmics Leaving Outdoor Droplets) chamber at CERN, that sulfuric acid and oxidized organic vapors at atmospheric concentrations reproduce particle nucleation rates observed in ...

  10. Hygroscopic growth of urban aerosol particles during the 2009 Mirage-Shanghai Campaign

    Science.gov (United States)

    Ye, Xingnan; Tang, Chen; Yin, Zi; Chen, Jianmin; Ma, Zhen; Kong, Lingdong; Yang, Xin; Gao, Wei; Geng, Fuhai

    2013-01-01

    The hygroscopic properties of submicrometer urban aerosol particles were studied during the 2009 Mirage-Shanghai Campaign. The urban aerosols were composed of more-hygroscopic and nearly-hydrophobic particles, together with a trace of less-hygroscopic particles. The mean hygroscopicity parameter κ of the more-hygroscopic mode varied in the range of 0.27-0.39 depending on particle size. The relative abundance of the more-hygroscopic particles at any size was ca. 70%, slightly increasing with particle size. The number fraction of the nearly-hydrophobic particles fluctuated between 0.1 and 0.4 daily, in accordance with traffic emissions and atmospheric diffusion. The results from relative humidity dependence on hygroscopic growth and chemical analysis of fine particles indicated that particulate nitrate formation through the homogenous gas-phase reaction was suppressed under ammonia-deficient atmosphere in summer whereas the equilibrium was broken by more available NH3 during adverse meteorological conditions.

  11. Images reveal that atmospheric particles can undergo liquid–liquid phase separations

    OpenAIRE

    You, Yuan; Renbaum-Wolff, Lindsay; Carreras-Sospedra, Marc; Hanna, Sarah J.; Hiranuma, Naruki; Kamal, Saeid; Smith, Mackenzie L.; Zhang, Xiaolu; Weber, Rodney J.; Shilling, John E.; Dabdub, Donald; Martin, Scot T.; Bertram, Allan K.

    2012-01-01

    A large fraction of submicron atmospheric aerosol particles contains both organic material and inorganic salts. As the relative humidity cycles in the atmosphere and the water content of the particles correspondingly changes, these mixed particles can undergo a range of phase transitions, possibly including liquid–liquid phase separation. If liquid–liquid phase separation occurs, the gas-particle partitioning of atmospheric semivolatile organic compounds, the scattering and absorption of sola...

  12. MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

    Institute of Scientific and Technical Information of China (English)

    Fengfu Fu; Liangjun Xu; Wei Ye; Yiquan Chen; Mingyu Jiang; Xueqin Xu

    2006-01-01

    Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon (BC) aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer (SEM-EDX). The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry (MALDI-TOF-MS).

  13. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles – Part 1: Principle of measurements and instrument evaluation

    Directory of Open Access Journals (Sweden)

    J.-B. Renard

    2015-01-01

    Full Text Available The study of aerosols in the troposphere and in the stratosphere is of major importance both for climate and air quality studies. Among the numerous instruments available, aerosol particles counters provide the size distribution in diameter range from few hundreds of nm to few tens of μm. Most of them are very sensitive to the nature of aerosols, and this can result in significant biases in the retrieved size distribution. We describe here a new versatile optical particle/sizer counter (OPC named LOAC (Light Optical Aerosols Counter, which is light and compact enough to perform measurements not only at the surface but under all kinds of balloons in the troposphere and in the stratosphere. LOAC is an original OPC performing observations at two scattering angles. The first one is around 12°, and is almost insensitive to the nature of the particles; the second one is around 60° and is strongly sensitive to the refractive index of the particles. By combining measurement at the two angles, it is possible to retrieve accurately the size distribution and to estimate the nature of the dominant particles (droplets, carbonaceous, salts and mineral particles in several size classes. This speciation is based on calibration charts obtained in the laboratory. Several campaigns of cross-comparison of LOAC with other particle counting instruments and remote sensing photometers have been conducted to validate both the size distribution derived by LOAC and the retrieved particle number density. The speciation of the aerosols has been validated in well-defined conditions including urban pollution, desert dust episodes, fog, and cloud. Comparison with reference aerosol mass monitoring instruments also shows that the LOAC measurements can be successfully converted to mass concentrations. All these tests indicate that no bias is present in the LOAC measurements and in the corresponding data processing.

  14. Determination of elemental composition and probable sources of atmospheric aerosol in Tirana by EDXRF analysis

    International Nuclear Information System (INIS)

    Full text: The importance of aerosol composition study is directly related with the specific role that aerosol particles play on human health and in different atmospheric parameters. The air pollution monitoring in Tirana has started long ago by measuring some common pollutants, but only during the last years a few attempts have been made for the study of aerosol composition. These were based on the analysis of total aerosol samples collected on cellulose filters using energy dispersive X ray fluorescence (EDXRF) spectrometry. Recently, with the support of the Albanian Ministry of Environment, an aerosol sampling campaign was organized in Tirana. Two different stations were selected for collecting aerosol samples. The first was situated in the centre of the city while the second, in a clean area, near the top of the mountain Dajti. In each of the stations total and size-fractionated aerosol samples were collected respectively on TFA-41 cellulose filters using high volume pumps and on Nuclepore filters using stacked filter unit sampler. An experimental EDXRF system was used for the determination of the concentrations of about 15 elements in the aerosol-loaded filters. The analytical data obtained allowed the calculation of the mean elemental concentrations in the aerosol and their crustal enrichment factors. The application of multivariate methods (Factor Analysis) allowed the identification of the main aerosol sources. (author)

  15. Infrared remote sensing of atmospheric aerosols; Apports du sondage infrarouge a l'etude des aerosols atmospheriques

    Energy Technology Data Exchange (ETDEWEB)

    Pierangelo, C.

    2005-09-15

    The 2001 report from the Intergovernmental Panel on Climate Change emphasized the very low level of understanding of atmospheric aerosol effects on climate. These particles originate either from natural sources (dust, volcanic aerosols...) or from anthropogenic sources (sulfates, soot...). They are one of the main sources of uncertainty on climate change, partly because they show a very high spatio-temporal variability. Observation from space, being global and quasi-continuous, is therefore a first importance tool for aerosol studies. Remote sensing in the visible domain has been widely used to obtain a better characterization of these particles and their effect on solar radiation. On the opposite, remote sensing of aerosols in the infrared domain still remains marginal. Yet, not only the knowledge of the effect of aerosols on terrestrial radiation is needed for the evaluation of their total radiative forcing, but also infrared remote sensing provides a way to retrieve other aerosol characteristics (observations are possible at night and day, over land and sea). In this PhD dissertation, we show that aerosol optical depth, altitude and size can be retrieved from infrared sounder observations. We first study the sensitivity of aerosol optical properties to their micro-physical properties, we then develop a radiative transfer code for scattering medium adapted to the very high spectral resolution of the new generation sounder NASA-Aqua/AIRS, and we finally focus on the inverse problem. The applications shown here deal with Pinatubo stratospheric volcanic aerosol, observed with NOAA/HIRS, and with the building of an 8 year climatology of dust over sea and land from this sounder. Finally, from AIRS observations, we retrieve the optical depth at 10 {mu}m, the average altitude and the coarse mode effective radius of mineral dust over sea. (author)

  16. Remote sensing of aerosol in the terrestrial atmosphere from space: "AEROSOL-UA" mission

    Science.gov (United States)

    Yatskiv, Yaroslav; Milinevsky, Gennadi; Degtyarev, Alexander

    2016-07-01

    The distribution and properties of atmospheric aerosols on a global scale are not well known in terms of determination of their effects on climate. This mostly is due to extreme variability of aerosol concentrations, properties, sources, and types. Aerosol climate impact is comparable to the effect of greenhouse gases, but its influence is more difficult to measure, especially with respect to aerosol microphysical properties and the evaluation of anthropogenic aerosol effect. There are many satellite missions studying aerosol distribution in the terrestrial atmosphere, such as MISR/Terra, OMI/Aura, AVHHR, MODIS/Terra and Aqua, CALIOP/CALIPSO. To improve the quality of data and climate models, and to reduce aerosol climate forcing uncertainties, several new missions are planned. The gap in orbital instruments for studying aerosol microphysics has arisen after the Glory mission failed during launch in 2011. In this review paper, we describe several planned aerosol space missions, including the Ukrainian project AEROSOL-UA that will obtain the data using a multi-channel scanning polarimeter and wide-angle polarimetric camera. The mission is designed for remote sensing of the aerosol microphysics and cloud properties on a global scale.

  17. Mobile Atmospheric Aerosol and Radiation Characterization Observatory (MAARCO)

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: MAARCO is designed as a stand-alone facility for basic atmospheric research and the collection of data to assist in validating aerosol and weather models....

  18. New collector for continuous sampling of atmospheric aerosols

    Czech Academy of Sciences Publication Activity Database

    Mikuška, Pavel; Večeřa, Zbyněk

    Oxford : Elsevier, 2004, S431-S432. [EAC 2004. European Aerosol Conference 2004. Budapest (HU), 06.09.2004-10.09.2004] R&D Projects: GA AV ČR IAA4031105; GA ČR GA526/03/1182; GA ČR GA525/04/0011 Institutional research plan: CEZ:AV0Z4031919 Keywords : aerosol instrumentation * aerosol particles * chemical composition Subject RIV: CB - Analytical Chemistry, Separation

  19. Atmospheric aerosol monitoring by an elastic Scheimpflug lidar system.

    Science.gov (United States)

    Mei, Liang; Brydegaard, Mikkel

    2015-11-30

    This work demonstrates a new approach - Scheimpflug lidar - for atmospheric aerosol monitoring. The atmospheric backscattering echo of a high-power continuous-wave laser diode is received by a Newtonian telescope and recorded by a tilted imaging sensor satisfying the Scheimpflug condition. The principles as well as the lidar equation are discussed in details. A Scheimpflug lidar system operating at around 808 nm is developed and employed for continuous atmospheric aerosol monitoring at daytime. Localized emission, atmospheric variation, as well as the changes of cloud height are observed from the recorded lidar signals. The extinction coefficient is retrieved according to the slope method for a homogeneous atmosphere. This work opens up new possibilities of using a compact and robust Scheimpflug lidar system for atmospheric aerosol remote sensing. PMID:26698808

  20. Atmospheric sulphuric acid and aerosol formation: implications from atmospheric measurements for nucleation and early growth mechanisms

    Directory of Open Access Journals (Sweden)

    S.-L. Sihto

    2006-01-01

    Full Text Available We have investigated the formation and early growth of atmospheric secondary aerosol particles building on atmospheric measurements. The measurements were part of the QUEST 2 campaign which took place in spring 2003 in Hyytiälä (Finland. During the campaign numerous aerosol particle formation events occurred of which 15 were accompanied by gaseous sulphuric acid measurements. Our detailed analysis of these 15 events is focussed on nucleation and early growth (to a diameter of 3 nm of fresh particles. It revealed that new particle formation seems to be a function of the gaseous sulphuric acid concentration to the power from one to two when the time delay between the sulphuric acid and particle number concentration is taken into account. From the time delay the growth rates of freshly nucleated particles from 1 nm to 3 nm were determined. The mean growth rate was 1.2 nm/h and it was clearly correlated with the gaseous sulphuric acid concentration. We tested two nucleation mechanisms – recently proposed cluster activation and kinetic type nucleation – as possible candidates to explain the observed dependences, and determined experimental nucleation coefficients. We found that some events are dominated by the activation mechanism and some by the kinetic mechanism. Inferred coefficients for the two nucleation mechanisms are the same order of magnitude as chemical reaction coefficients in the gas phase and they correlate with the product of gaseous sulphuric acid and ammonia concentrations. This indicates that besides gaseous sulphuric acid also ammonia has a role in nucleation.

  1. Analysis of atmospheric aerosols using the Lisbon Nuclear Microprobe

    International Nuclear Information System (INIS)

    The nuclear microprobe installed at Instituto Tecnologico e Nuclear in Lisbon, was used in the analysis of aerosol collected at the Azores islands. Samples from different aerosol groups were analysed. One referred to aerosols that were carried from North America and the other one contained aerosols that were carried from the Sahara desert and crossed over Europe. Coarse and fine fractions were analysed for each aerosol group and two-dimensional elemental maps were constructed, which allowed the identification of several individual particles. For particles of interest, elemental spatial correlations and dimensions were determined and point analysis was also carried out (depth information was achieved by fitting Rutherford backscattering spectra). Some of these particles are quite interesting. For instance, in the fine fraction of the aerosols that were carried from North America particles were found with Cu and Cl in the atomic proportion 1:2 and with dimensions 15x15x15 μm3, and in the corresponding coarse fraction a particle with K and S was identified, with dimensions 28x35x30 μm3. Some differences were found between aerosol groups. One example of these Ti particles (fine fraction) and Rb (coarse fraction) that were identified in one group (Sahara desert and Europe), but not in the other. (author)

  2. Spatial and Temporal Variations of Atmospheric Aerosol in Osaka

    Directory of Open Access Journals (Sweden)

    Sonoyo Mukai

    2013-05-01

    Full Text Available It is well known that the aerosol distribution in Asia is complex due to both the increasing emissions of the anthropogenic aerosols associated with economic growth and the behavior of natural dusts. Therefore, detailed observations of atmospheric particles in Asian urban cities are important. In this work, we focus on the spatial and temporal variations of atmospheric particles around Higashi-Osaka in Japan. Higashi-Osaka is located in the eastern part of Osaka, the second-largest city in Japan, and is famous for small- and medium-sized manufacturing enterprises. For this study, we placed various ground measurement devices around the Higashi-Osaka campus of Kinki University including a Cimel sunphotometer supported by NASA/AERONET (Aerosol robotics network, suspended particulate matter (SPM sampler and LIDAR (light detection and ranging. Individual particle analyses with a SEM (scanning electron microscope/EDX (energy-dispersive X-ray analyzer show the temporal variations of particle properties, such as size, shape and components, during a dust event on 21 March 2010. The simultaneous measurement using a portable sun photometer with AERONET was conducted from April to November 2011. A comparison of the data at each site and the combination of the observed LIDAR data and model simulations indicate the difference in the transportation processes between dust and anthropogenic particles. We suppose this difference is attributed to the differences in the vertical aerosol profiles, where one aerosol is transported over Mount Ikoma and the other is blocked by it.

  3. Atmospheric discharges and particle fluxes

    Science.gov (United States)

    Chilingarian, A.; Chilingaryan, S.; Reymers, A.

    2015-07-01

    Fluxes of the electrons, gamma rays, and neutrons observed by particle detectors located on the Earth's surface during thunderstorms originate so-called Thunderstorm Ground Enhancements (TGEs). The relativistic runaway electron avalanches giving rise to TGEs originate in the thundercloud's lower dipole between the main negatively charged region in the middle of the thundercloud and transient lower positively charged region. Acceleration of electrons in the upper dipole between main negative and main positive charge regions leads to initiation of the terrestrial gamma flashes (TGFs) intensive researched during the last two decades by orbiting gamma ray observatories. TGFs are exceptionally intense, submillisecond bursts of electromagnetic radiation directed to the open space from the thunderstorm atmosphere. Unlike visible lightning, TGF beams do not create a hot plasma channel and optical flash; hence, in the literature they got name "dark lightning." We investigate the TGEs development in 1 min and 1 s time series of particle detector count rates. Synchronized time series of the near-surface electric field and lightning occurrences allows interconnecting two atmospheric phenomena. Registration of the Extensive Air Showers allows approaching problems of relation of the lightning occurrences and particle fluxes.

  4. Study on atmospheric aerosols in Khartoum state

    International Nuclear Information System (INIS)

    This study is primarily conducted to evaluate air pollution with chemical contaminants and to determine their possible sources in Khartoum State. Air samples representing areas with heavy traffic ( Algorashi and Burri) and industrial area ( Kafoory) were collected with the aid of gent SFU sampler and analysed for Ti, Zn, Fe, Br and Pb in both fine ( PM2.5) and particulate ( PM10) fractions of aerosol using an energy dispersive X RF. On the average, the results obtained in Kafoory were 349.43 (Ti), 594.15 (Fe), 681.25 9 (Zn), 284.18 (Br) and 299.13 (Pb) μg/m2 for PM10; and the result obtained were 685.33 (Ti), 376.93 (Fe), 187.05 (Zn), 477.13 (Br), and 263.7 (Pb) μg/m2 for PM2.5. Based on particle size, Zn is more concentration in PM10 whereas Ti in PM2.5. In general, the level contamination was high in particulate fraction (PM10) relative to fine fraction which is typical characteristic of desert environments. The Pb/Br ratio found to be greater than natural value (0.386) in both fractions and reveals a similar distribution trends which indicates that the air in Khartoum state is polluted with these elements and probably due to the sue of leaded fuel.(Author)

  5. Unraveling the Complexity of Atmospheric Aerosol: Insights from Ultrahigh Resolution Mass Spectrometry

    Science.gov (United States)

    Mazzoleni, Lynn R.; Zhao, Yunzhu; Samburova, Vera; Gannet Hallar, A.; Lowenthal, Douglas

    2016-04-01

    Atmospheric aerosol organic matter (AOM) is a complex mixture of thousands of organic compounds, which may have significant influence on the climate-relevant properties of atmospheric aerosols. An improved understanding of the molecular composition of AOM is needed to evaluate the effect of aerosol composition upon aerosol physical properties. Products of gas, aqueous and particle phase reactions contribute to the aerosol organic mass. Thus, ambient aerosols carry a complex array of AOM components with variable chemical signatures depending upon its origin and aerosol life-cycle processes. In this work, ultrahigh-resolution Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to characterize ambient aerosol AOM collected at the Storm Peak Laboratory (3210 m a.s.l.) near Steamboat Springs, CO. Thousands of molecular formulas were assigned in the mass range of m/z 100-800 after negative-ion electrospray ionization. Using multivariate statistical analysis, correlations between the site meteorological conditions and specific molecular compositions were identified. For example, days with strong UV radiation and high temperature were found to contain large numbers of biogenic SOA molecular formulas. Similarly, days with high relative humidity and high sulfate concentrations were found to contain many sulfur-containing compounds, suggesting their aqueous phase formation.

  6. Determination of the particle size distribution of aerosols by means of a diffusion battery

    International Nuclear Information System (INIS)

    The different methods allowing to determine the particle size distribution of aerosols by means of diffusion batteries are described. To that purpose, a new method for the processing of experimental data (percentages of particles trapped by the battery vs flow rate) was developed on the basis of calculation principles which are described and assessed. This method was first tested by numerical simulation from a priori particle size distributions and then verified experimentally using a fine uranine aerosol whose particle size distribution as determined by our method was compared with the distribution previously obtained by electron microscopy. The method can be applied to the determination of particle size distribution spectra of fine aerosols produced by 'radiolysis' of atmospheric gaseous impurities. Two other applications concern the detection threshold of the condensation nuclei counter and the 'critical' radii of 'radiolysis' particles

  7. Aerosols in large-scale atmospheric models: Future directions and needs

    Energy Technology Data Exchange (ETDEWEB)

    Kerminen, V.M.; Korhonen, H. [Finnish Meteorological Institute, Helsinki (Finland)

    2004-07-01

    Large-scale atmospheric models range from regional air quality models to global chemical transport and/or climate models. The treatment of aerosol particles in such models was very crude in the past, as most models included only the sulfate aerosol or some other major aerosol type such as sea-salt or dust. The only predicted aerosol parameter in these models was the total mass concentration of each aerosol type. More recent models have aimed to predict the mass size distribution of relevant chemical components in the particulate phase. The application of large-scale atmospheric models has shifted gradually from acid deposition and visibility studies toward investigating the climate change and various health effects caused by air pollution. As a result, new requirements for these models and their structures have appeared. In the following we will discuss briefly what this means in terms of treating aerosols in large-scale atmospheric models, and what implications this further has on doing aerosol measurements.

  8. Ångström coefficient as an indicator of the atmospheric aerosol type for a well-mixed atmospheric boundary layer: Part 1: Model development

    Directory of Open Access Journals (Sweden)

    Jolanta Kuśmierczyk-Michulec

    2009-03-01

    Full Text Available The physical and optical properties of an atmospheric aerosol mixture depend on a number of factors. The relative humidity influences the size of hydroscopic particles and the effective radius of an aerosol mixture. In consequence, values of the aerosol extinction, the aerosol optical thickness and the Ångström coefficient are modified. A similar effect is observed when the aerosol composition changes. A higher content of small aerosol particles causes the effective radius of an aerosol mixture to decrease and the Ångström coefficient to increase. Both effects are analysed in this paper. The parameters of the size distribution and the type of components used to represent natural atmospheric aerosol mixtures are based on experimental data. The main components are sea-salts (SSA, anthropogenic salts (WS, e.g. NH4HSO4, NH4NO3, (NH42 SO4, organic carbon (OC and black carbon (BC. The aerosol optical thickness is modelled using the external mixing approach. The influence of relative humidity on the optical and physical properties of the following aerosol mixtures is investigated: (SSA & WS, (SSA & OC, (SSA & BC, (SSA, WS & OC and (WS, OC & BC. It is demonstrated that the Ängström coefficient can be used as a rough indicator of the aerosol type.

  9. Determining Atmospheric Aerosol Content With An Infra-red Radiometer

    CERN Document Server

    Daniel, M K; Chadwick, P M

    2014-01-01

    The atmospheric attenuation of Cherenkov photons is dominated by two processes: Rayleigh scattering from the molecular component and Mie scattering from the aerosol component. Aerosols are expected to contribute up to 30 Wm$^{-2}$ to the emission profile of the atmosphere, equivalent to a difference of ~20C to the clear sky brightness temperature under normal conditions. Here we investigate the aerosol contribution of the measured sky brightness temperature at the H.E.S.S. site; compare it to effective changes in the telescope trigger rates; and discuss how it can be used to provide an assessment of sky clarity that is unambiguously free of telescope systematics.

  10. Determining atmospheric aerosol content with an infra-red radiometer

    CERN Document Server

    Daniel, Michael; 10.1063/1.4772360

    2012-01-01

    The attenuation of atmospheric Cherenkov photons is dominated by two processes: Rayleigh scattering from the molecular component and Mie scattering from the aerosol component. Aerosols are expected to contribute up to 30 Wm$^{-2}$ to the emission profile of the atmosphere, equivalent to a difference of $\\sim20^\\circ$C to the clear sky brightness temperature under normal conditions. Here we investigate the aerosol contribution of the measured sky brightness temperature at the H.E.S.S. site; compare it to effective changes in the telescope trigger rates; and discuss how it can be used to provide an assessment of sky clarity that is unambiguously free of telescope systematics.

  11. Characteristics of aerosol at a lower atmospheric layer in DRAGON field campaign

    Science.gov (United States)

    KUJI, M.; Azuma, Y.; Kitakoga, S.; Sano, I.; Holben, B. N.

    2013-12-01

    Air pollution arises severely over East Asia with the rapid economic development nowadays. Monitoring the atmospheric environment, as one of the purposes, an intensive field campaign, Distributed Regional Aerosol Gridded Observation Networks (DRAGON), was carried out in the spring of year 2012, led by National Aeronautics and Space Administration (NASA). At that time, atmospheric phenomena such as Yellow sand and haze events were observed at Nara in the western part of Japan, as one of the DRAGON observation sites. The atmospheric events were characterized with the AErosol RObotic NETwork (AERONET) data. As a result of the data analysis, it was found that more light-absorbing and smaller particles dominated at the lower than upper atmospheric layer for the Kosa event in particular. A backward trajectory analysis suggested that the Yellow sand event traveled over the East Asian industrial cities, which could lead to a mixture of sand and air pollutants with moderate particle size and light-absorptivity. In addition, visibility observation was evaluated quantitatively with AERONET data in the DRAGON campaign since eye observation was inherently semi-quantitative. The extinction coefficient estimated from visibility was compared to that from AERONET. As a result, it was found that the extinction coefficients were generally consistent to each other. But there were some discrepancies, which could be caused with the atmospheric phenomena or aerosol types. It is confirmed that visibility is strongly influenced with aerosols in the case of severe atmospheric phenomena in particular.

  12. Remote sensing for studying atmospheric aerosols in Malaysia

    Science.gov (United States)

    Kanniah, Kasturi D.; Kamarul Zaman, Nurul A. F.

    2015-10-01

    The aerosol system is Southeast Asia is complex and the high concentrations are due to population growth, rapid urbanization and development of SEA countries. Nevertheless, only a few studies have been carried out especially at large spatial extent and on a continuous basis to study atmospheric aerosols in Malaysia. In this review paper we report the use of remote sensing data to study atmospheric aerosols in Malaysia and document gaps and recommend further studies to bridge the gaps. Satellite data have been used to study the spatial and seasonal patterns of aerosol optical depth (AOD) in Malaysia. Satellite data combined with AERONET data were used to delineate different types and sizes of aerosols and to identify the sources of aerosols in Malaysia. Most of the aerosol studies performed in Malaysia was based on station-based PM10 data that have limited spatial coverage. Thus, satellite data have been used to extrapolate and retrieve PM10 data over large areas by correlating remotely sensed AOD with ground-based PM10. Realising the critical role of aerosols on radiative forcing numerous studies have been conducted worldwide to assess the aerosol radiative forcing (ARF). Such studies are yet to be conducted in Malaysia. Although the only source of aerosol data covering large region in Malaysia is remote sensing, satellite observations are limited by cloud cover, orbital gaps of satellite track, etc. In addition, relatively less understanding is achieved on how the atmospheric aerosol interacts with the regional climate system. These gaps can be bridged by conducting more studies using integrated approach of remote sensing, AERONET and ground based measurements.

  13. Evaluation and application of passive and active optical remote sensing methods for the measurement of atmospheric aerosol properties

    Energy Technology Data Exchange (ETDEWEB)

    Mielonen, T.

    2010-07-01

    Atmospheric aerosol particles affect the atmosphere's radiation balance by scattering and absorbing sunlight. Moreover, the particles act as condensation nuclei for clouds and affect their reflectivity. In addition, aerosols have negative health effects and they reduce visibility. Aerosols are emitted into the atmosphere from both natural and anthropogenic sources. Different types of aerosols have different effects on the radiation balance, thus global monitoring and typing of aerosols is of vital importance. In this thesis, several remote sensing methods used in the measurement of atmospheric aerosols are evaluated. Remote sensing of aerosols can be done with active and passive instruments. Passive instruments measure radiation emitted by the sun and the Earth while active instruments have their own radiation source, for example a black body radiator or laser. The instruments utilized in these studies were sun photometers (PFR, Cimel), lidars (POLLYXT, CALIOP), transmissiometer (OLAF) and a spectroradiometer (MODIS). Retrieval results from spaceborne instruments (MODIS, CALIOP) were evaluated with ground based measurements (PFR, Cimel). In addition, effects of indicative aerosol model assumptions on the calculated radiative transfer were studied. Finally, aerosol particle mass at the ground level was approximated from satellite measurements and vertical profiles of aerosols measured with a lidar were analyzed. For the evaluation part, these studies show that the calculation of aerosol induced attenuation of radiation based on aerosol size distribution measurements is not a trivial task. In addition to dry aerosol size distribution, the effect of ambient relative humidity on the size distribution and the optical properties of the aerosols need to be known in order to achieve correct results from the calculations. Furthermore, the results suggest that aerosol size parameters retrieved from passive spaceborne measurements depend heavily on surgace reflectance

  14. The effects of mineral dust particles, aerosol regeneration and ice nucleation parameterizations on clouds and precipitation

    Directory of Open Access Journals (Sweden)

    A. Teller

    2012-03-01

    Full Text Available This study focuses on the effects of aerosol particles on the formation of convective clouds and precipitation in the Eastern Mediterranean sea with a special emphasis on the role of mineral dust particles in these processes. We used a new detailed numerical cloud microphysics scheme that has been implemented in the Weather Research and Forecast (WRF model in order to study aerosol-cloud interaction in 3-D configuration based on realistic meteorological data. Using a number of case studies we tested the contribution of mineral dust particles and different ice nucleation parameterizations to precipitation development. In this study we also investigated the importance of recycled (regenerated aerosols that had been released to the atmosphere following the evaporation of cloud droplets.

    The results showed that increased aerosol concentration due to the presence of mineral dust enhanced the formation of ice crystals. The dynamic evolution of the cloud system sets the time periods and regions in which heavy or light precipitation occurred in the domain. The precipitation rate, the time and duration of precipitation were affected by the aerosol properties only at small area scales (with areas of about 20 km2. Changes of the ice nucleation scheme from ice supersaturation dependent parameterization to a recent approach of aerosol concentration and temperature dependent parameterization modified the ice crystals concentrations but did not affect the total precipitation in the domain. Aerosol regeneration modified the concentration of cloud droplets at cloud base by dynamic recirculation of the aerosols but also had only a minor effect on precipitation.

    The major conclusion from this study is that the effect of mineral dust particles on clouds and total precipitation is limited by the properties of the atmospheric dynamics and the only effect of aerosol on precipitation may come from significant increase in the concentration

  15. Modeling of the chemical behavior of sodium fire aerosols during atmospheric dispersion

    International Nuclear Information System (INIS)

    Conclusions: • Development of a preliminary kinetic model of NaOH aerosols carbonation based on the shrinking core model for chemical and physical evolutions with transfer time during atmospheric dispersion -> These kinetic models can be implemented in atmospheric dispersion code to calculate mass concentration evolution of each compound. • Validation of kinetic control by internal diffusion of CO2 into solid Na2CO3 external layer by non-dimensional criteria analysis. • First validation of theoretical calculations with available experimental results -> correct results for small aerosols sizes (< 1 μm) but further improvements and validations are required to describe larger particles behavior

  16. Mixing state of atmospheric particles over the North China Plain

    Science.gov (United States)

    Zhang, S. L.; Ma, N.; Kecorius, S.; Wang, P. C.; Hu, M.; Wang, Z. B.; Größ, J.; Wu, Z. J.; Wiedensohler, A.

    2016-01-01

    In this unique processing study, the mixing state of ambient submicron aerosol particles in terms of hygroscopicity and volatility was investigated with a Hygroscopicity Tandem Differential Mobility Analyzer and a Volatility Tandem Differential Mobility Analyzer. The measurements were conducted at a regional atmospheric observational site in the North China Plain (NCP) from 8 July to 9 August, 2013. Multimodal patterns were observed in the probability density functions of the hygroscopicity parameter κ and the shrink factor, indicating that ambient particles are mostly an external mixture of particles with different hygroscopicity and volatility. Linear relationships were found between the number fraction of hydrophobic and non-volatile populations, reflecting the dominance of soot in hydrophobic and non-volatile particles. The number fraction of non-volatile particles is lower than that of hydrophobic particles in most cases, indicating that a certain fraction of hydrophobic particles is volatile. Distinct diurnal patterns were found for the number fraction of the hydrophobic and non-volatile particles, with a higher level at nighttime and a lower level during the daytime. The result of air mass classification shows that aerosol particles in air masses coming from north with high moving speed have a high number fraction of hydrophobic/non-volatile population, and are more externally mixed. Only minor differences can be found between the measured aerosol properties for the rest of the air masses. With abundant precursor in the NCP, no matter where the air mass originates, as far as it stays in the NCP for a certain time, aerosol particles may get aged and mixed with newly emitted particles in a short time.

  17. Deposition of flux and atmospheric behavior of oil shale combustion aerosols

    International Nuclear Information System (INIS)

    The atmospheric behavior of oil shale combustion fly ash aerosol was studied under simulated conditions. The fine (respirable) fraction of fly ash particles, which contributes most to the health effects of the aerosol, significantly increased (from 25 to 65 % by mass) in time scale. The toxic elements and carcinogenic PAH adsorbed on the fine particles of fly ash could represent a health hazard for human. The bulk and trace elements in emissions (flue gases) and integrated deposition samples were also investigated based on original measurements and literature data. (author)

  18. Volatile properties of atmospheric aerosols during nucleation events at Pune, India

    Indian Academy of Sciences (India)

    P Murugavel; D M Chate

    2011-06-01

    Continuous measurements of aerosol size distributions in the mid-point diameter range 20.5–500 nm were made from October 2005 to March 2006 at Pune (18° 32′N, 73° 51′E), India using Scanning Mobility Particle Sizer (SMPS). Volatilities of atmospheric aerosols were also measured at 40°, 125°, 175°, 300° and 350°C temperatures with Thermodenuder–SMPS coupled system to determine aerosol volatile fractions. Aerosols in nucleated, CCN and accumulated modes are characterized from the measured percentage of particles volatized at 40°, 125°, 175°, 300° and 350°C temperatures. Averaged monthly aerosol concentration is at its maximum in November and gradually decreases to its minimum at the end of March. The diurnal variations of aerosol concentrations gradually decrease in the night and in early morning hours (0400–0800 hr). However, concentration attains minimum in its variations in the noon (1400–1600 hr) due to higher ventilation factor (product of mixing height and wind speed). The half an hour averaged diurnal variation of aerosol number concentration shows about 5 to 10-fold increase despite the ventilation factor at higher side before 1200 hr. This sudden increase in aerosol concentrations is linked with prevailing conditions for nucleation bursts. The measurement of volatile fraction of ambient aerosols reveals that there are large number of highly volatile particles in the Aitken mode in the morning hours and these volatile fractions of aerosols at temperatures > 150°C are of ammonium chloride and ammonium sulfate, acetic and formic acids.

  19. Method of measuring aerosol particles using automated mobility-classified aerosol detector

    OpenAIRE

    Russell, Lynn M.; Flagan, Richard C.; Zhang, Shou-Hua

    1999-01-01

    An aerosol detection system for measuring particle number distribution with respect to particle dimension in an aerosol sample. The system includes an alternating dual-bag sampler, a radially classified differential mobility analyzer, and a condensation nucleus counter. Pressure variations in sampling are compensated by feedback control of volumetric flow rates.

  20. Experimental evidence for the role of ions in particle nucleation under atmospheric conditions

    DEFF Research Database (Denmark)

    Svensmark, Henrik; Pedersen, Jens Olaf Pepke; Marsh, N.D.;

    2007-01-01

    Experimental studies of aerosol nucleation in air, containing trace amounts of ozone, sulphur dioxide and water vapour at concentrations relevant for the Earth's atmosphere, are reported. The production of new aerosol particles is found to be proportional to the negative ion density and yields nu...

  1. Atmospheric data over a solar cycle: no connection between galactic cosmic rays and new particle formation

    Directory of Open Access Journals (Sweden)

    M. Kulmala

    2009-10-01

    Full Text Available Aerosol particles affect the Earth's radiative balance by directly scattering and absorbing solar radiation and, indirectly, through their activation into cloud droplets. Both effects are known with considerable uncertainty only, and translate into even bigger uncertainties in future climate predictions. More than a decade ago, variations in galactic cosmic rays were suggested to closely correlate with variations in atmospheric cloud cover and therefore constitute a driving force behind aerosol-cloud-climate interactions. Later, the enhancement of atmospheric aerosol particle formation by ions generated from cosmic rays was proposed as a physical mechanism explaining this correlation. Here, we report unique observations on atmospheric aerosol formation based on measurements at the SMEAR II station, Finland, over a solar cycle (years 1996–2008 that shed new light on these presumed relationships. Our analysis shows that none of the quantities related to aerosol formation correlates with the cosmic ray-induced ionisation intensity (CRII. We also examined the contribution of ions to new particle formation on the basis of novel ground-based and airborne observations. A consistent result is that ion-induced formation contributes typically less than 10% to the number of new particles, which would explain the missing correlation between CRII and aerosol formation. Our main conclusion is that galactic cosmic rays appear to play a minor role for atmospheric aerosol formation, and so for the connected aerosol-climate effects as well.

  2. Atmospheric data over a solar cycle: no connection between galactic cosmic rays and new particle formation

    Directory of Open Access Journals (Sweden)

    M. Kulmala

    2010-02-01

    Full Text Available Aerosol particles affect the Earth's radiative balance by directly scattering and absorbing solar radiation and, indirectly, through their activation into cloud droplets. Both effects are known with considerable uncertainty only, and translate into even bigger uncertainties in future climate predictions. More than a decade ago, variations in galactic cosmic rays were suggested to closely correlate with variations in atmospheric cloud cover and therefore constitute a driving force behind aerosol-cloud-climate interactions. Later, the enhancement of atmospheric aerosol particle formation by ions generated from cosmic rays was proposed as a physical mechanism explaining this correlation. Here, we report unique observations on atmospheric aerosol formation based on measurements at the SMEAR II station, Finland, over a solar cycle (years 1996–2008 that shed new light on these presumed relationships. Our analysis shows that none of the quantities related to aerosol formation correlates with the cosmic ray-induced ionisation intensity (CRII. We also examined the contribution of ions to new particle formation on the basis of novel ground-based and airborne observations. A consistent result is that ion-induced formation contributes typically significantly less than 10% to the number of new particles, which would explain the missing correlation between CRII and aerosol formation. Our main conclusion is that galactic cosmic rays appear to play a minor role for atmospheric aerosol formation events, and so for the connected aerosol-climate effects as well.

  3. Pathways, Impacts, and Policies on Severe Aerosol Injections into the Atmosphere: 2011 Severe Atmospheric Aerosols Events Conference

    KAUST Repository

    Weil, Martin

    2012-09-01

    The 2011 severe atmospheric events conference, held on August 11-12, 2011, Hamburg, Germany, discussed climatic and environmental changes as a result of various kinds of huge injections of aerosols into the atmosphere and the possible consequences for the world population. Various sessions of the conference dealt with different aspects of large aerosol injections and severe atmospheric aerosol events along the geologic time scale. A presentation about radiative heating of aerosols as a self-lifting mechanism in the Australian forest fires discussed the question of how the impact of tropical volcanic eruptions depends on the eruption season. H.-F. Graf showed that cloud-resolving plume models are more suitable to predict the volcanic plume height and dispersion than one-dimensional models. G. Stenchikov pointed out that the absorbing smoke plumes in the upper troposphere can be partially mixed into the lower stratosphere because of the solar heating and lofting effect.

  4. Determination of Aerosol Particle Diameter Using Cascade Impactor Procedure

    International Nuclear Information System (INIS)

    Determination of aerosol particle size distribution has been done using a low pressure Andersen's cascade impactor with 13 stages. The aerosol has been sampled with flow rate of aerosol sampling of 28.3 Ipm. Preliminary study result shows that aerosol in the simulation chamber was spread in monomodal distribution with Mass Median Aerodynamic Diameter of 4.9 μm. The aerosol measurement in Japan Power Demonstration Reactor has been spread in trimodal distribution with Activity Median Aerodynamic Diameter equal to 13.3 μm. The use of mylar as impaction plate instead of aluminum foil gives good result

  5. Characterization of size distributions of elemental mass concentrations in atmospheric aerosols derived from different sources

    International Nuclear Information System (INIS)

    The atmospheric aerosol samples were collected at six representative sites with an 8-stage cascade impactor sampler and analyzed for their elemental mass concentrations by the PIXE analytic method. Based on some indicator elements, the characteristic of size distributions of particles from different sources were obtained. According to these characteristics, we inferred the origins of the ultrafine particles around the Great Wall Station in the Antarctic. (orig.)

  6. Atmospheric aerosol in an urban area: Comparison of measurement instruments and methodologies and pulmonary deposition assessment; Aerosol atmosferico in area urbanae di misura e valutazione di deposizione polmonare

    Energy Technology Data Exchange (ETDEWEB)

    Berico, M.; Luciani, A.; Formignani, M. [ENEA, Centro Ricerche Bologna (Italy). Dip. Ambiente

    1996-07-01

    In March 1995 a measurement campaign of atmospheric aerosol in the Bologna urban area (Italy) was carried out. A transportable laboratory, set up by ENEA (Italian national Agency for New Technologies, Energy and the Environment) Environmental Department (Bologna), was utilized with instruments for measurement of atmospheric aerosol and meteorological parameters. The aim of this campaign was of dual purpose: to characterize aerosol in urban area and to compare different instruments and methodologies of measurements. Mass concentrations measurements, evaluated on a 23-hour period with total filter, PM10 dichotomous sampler and low pressure impactor (LPI Berner), have provided information respectively about total suspended particles, respirable fraction and granulometric parameters of aerosol. Eight meteorologic parameters, number concentration of submicromic fraction of aerosol and mass concentration of micromic fraction have been continually measured. Then, in a daytime period, several number granulometries of atmospheric aerosol have also been estimated by means of diffusion battery system. Results related to different measurement methodologies and granulometric characteristics of aerosol are presented here. Pulmonary deposition of atmospheric aerosol is finally calculated, using granulometries provided by LPI Brener and ICRP 66 human respiratory tract model.

  7. Sources and composition of urban aerosol particles

    Directory of Open Access Journals (Sweden)

    M. Vogt

    2011-09-01

    Full Text Available From May 2008 to March 2009 aerosol emissions were measured using the eddy covariance method covering the size range 0.25 to 2.5 μm diameter (Dp from a 105 m tower, in central Stockholm, Sweden. Supporting chemical aerosol data were collected at roof and street level. Results show that the inorganic fraction of sulfate, nitrate, ammonium and sea salt accounts for approximately 15% of the total aerosol mass <1 μm Dp (PM1 with water soluble soil contributing 11% and water insoluble soil 47%. Carbonaceous compounds were at the most 27% of PM1 mass. It was found that heating the air from the tower to 200 °C resulted in the loss of approximately 60% of the aerosol volume at 0.25 μm Dp whereas only 40% of the aerosol volume was removed at 0.6 μm Dp. Further heating to 300 °C caused very little additional losses <0.6 μm Dp. The chemical analysis did not include carbonaceous compounds, but based on the difference between the total mass concentration and the sum of the analyzed non-carbonaceous materials, it can be assumed that the non-volatile particulate material (heated to 300 °C consists mainly of carbonaceous compounds, including elemental carbon. Furthermore, it was found that the non-volatile particle fraction <0.6 μm Dp correlated (r2 = 0.4 with the BC concentration at roof level in the city, supporting the assumption that the non-volatile material consists of carbonaceous compounds. The average diurnal cycles of the BC emissions from road traffic (as inferred from the ratio of the incremental concentrations of nitrogen oxides (NOx and BC measured on a densely trafficked street and the fluxes of non-volatile material at tower level are in close agreement, suggesting a traffic source of BC. We have estimated the emission factors (EFs for non

  8. Comparison between CARIBIC aerosol samples analysed by accelerator-based methods and optical particle counter measurements

    Directory of Open Access Journals (Sweden)

    B. G. Martinsson

    2014-04-01

    Full Text Available Inter-comparison of results from two kinds of aerosol systems in the CARIBIC (Civil Aircraft for the Regular Investigation of the atmosphere Based on an Instrument Container passenger aircraft based observatory, operating during intercontinental flights at 9–12 km altitude, is presented. Aerosol from the lowermost stratosphere (LMS, the extra-tropical upper troposphere (UT and the tropical mid troposphere (MT were investigated. Aerosol particle volume concentration measured with an optical particle counter (OPC is compared with analytical results of the sum of masses of all major and several minor constituents from aerosol samples collected with an impactor. Analyses were undertaken with accelerator-based methods particle-induced X-ray emission (PIXE and particle elastic scattering analysis (PESA. Data from 48 flights during one year are used, leading to a total of 106 individual comparisons. The ratios of the particle volume from the OPC and the total mass from the analyses were in 84% within a relatively narrow interval. Data points outside this interval are connected with inlet-related effects in clouds, large variability in aerosol composition, particle size distribution effects and some cases of non-ideal sampling. Overall, the comparison of these two CARIBIC measurements based on vastly different methods show good agreement, implying that the chemical and size information can be combined in studies of the MT/UT/LMS aerosol.

  9. Heterogeneous nucleation of ice particles on glassy aerosols modifies TTL cirrus

    Science.gov (United States)

    Wilson, T. W.; Murray, B. J.; Dobbie, S.; Al-Jumur, S. M.; Cui, Z.; Wagner, R.; Moehler, O.; Schnaiter, M.; Benz, S.; Niemand, M.; Saathoff, H.; Skrotzki, J.; Ebert, V.; Wagner, S.; Karcher, B.

    2010-12-01

    Experiments at the AIDA chamber, Karlsruhe Institute of Technology, have shown that glassy aqueous citric acid aerosol can nucleate ice at temperatures relevant to the tropical tropopause layer (TTL)(1). Modelling suggests this new route to the formation of TTL cirrus can provide an explanation for the very low ice particle number density observed in cirrus clouds in this region and may lead to high in-cloud supersaturations(1). Nucleation of ice on glassy aerosol is consistent with the absence of traditional ice nuclei in sampled TTL cirrus residue(2). In addition, we will present new data from experiments performed in July 2010 at the AIDA chamber using glassy aerosols composed of other atmospherically relevant compounds (levoglucosan, raffinose) and an internal mixture of five dicarboxylic acids and ammonium sulphate (raffinose/M5AS)(3). All four systems tested nucleate ice when in a glassy state. This indicates that heterogeneous ice nucleation is a general property of glassy aerosols and that natural aerosols which are composed of similar molecules will also nucleate ice if glassy. Glassy aqueous levoglucosan and raffinose/M5AS aerosol nucleated ice at temperatures similar to those found for glassy aqueous citric acid aerosol (<202 K). Whereas raffinose, which forms a glass at much higher temperatures, nucleated ice heterogeneously at up to ~220 K. This activity at higher temperatures suggests that ice nucleation by glassy aerosol may also play a role in the formation of warmer ice clouds. (1)B. J. Murray et al., Heterogeneous nucleation of ice particles on glassy aerosols under cirrus conditions, Nature Geosci, 2010, 3, 233-237. (2)K. D. Froyd et al., Aerosols that form subvisible cirrus at the tropical tropopause, Atmos. Chem. Phys., 2010, 10, 209-218. (3)B. Zobrist et al., Do atmospheric aerosols form glasses?, Atmos. Chem. Phys., 2008, 8, 5221-5244.

  10. Evidence for Novel Atmospheric Organic Aerosol Measured in a Bornean Rainforest

    Science.gov (United States)

    Robinson, N. H.; Hamilton, J. F.; Allan, J. D.; Langford, B.; Oram, D. E.; Chen, Q.; Ward, M. W.; Hewitt, C. N.; Martin, S. T.; Coe, H.; McFiggans, G. B.

    2009-12-01

    The tropics emit a huge amount of volatile organic compounds (VOCs) into the Earth’s atmosphere. The processes by which these gases are oxidised to form secondary organic aerosol (SOA) are currently not well understood or quantified. Intensive field measurements were carried out as part of the Oxidant and Particle Photochemical Processes (OP3) and the Aerosol Coupling in the Earth System (ACES) projects around pristine rainforest in Malaysian Borneo. This is the first campaign of its type in a South East Asian rainforest. We present detailed organic aerosol composition measurements made using an Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) at Bukit Atur, a Global Atmosphere Watch site located in the Danum Valley Conservation Area. This is a state-of-the-art field deployable instrument that can provide real time composition, mass loading and aerodynamic particle sizing information. In addition, the mass spectral resolution is sufficient to perform an analysis of the elemental composition of the organic species present. Off line analysis of filter samples was performed using comprehensive two-dimensional gas chromatography coupled to time of flight mass spectrometry (GCxGC/ToFMS). This technique provide a more detailed chemical characterisation of the SOA, allowing direct links back to gas phase precursors. The ground site data are compared with Aerodyne Compact Time of Flight Aerosol Mass Spectrometer (C-ToF-AMS) measurements made on the UK Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 research aircraft. Airborne measurements were made above pristine rainforest surrounding the Danum Valley site, as well as nearby oil palm agricultural sites and palm oil rendering plants. Proton Transfer Reaction Mass Spectrometry (PTRMS) measurements of VOCs were made at the ground site and from the FAAM aircraft. Novel organic aerosol was measured by both AMSs, and identified by GCxGC/ToFMS analysis. The aerosol component was

  11. A combined particle trap/HTDMA hygroscopicity study of mixed inorganic/organic aerosol particles

    Directory of Open Access Journals (Sweden)

    A. A. Zardini

    2008-03-01

    Full Text Available Atmospheric aerosols are often mixtures of inorganic and organic material. Organics can represent a large fraction of the total aerosol mass and are comprised of water-soluble and insoluble compounds. Increasing attention was paid in the last decade to the capability of mixed inorganic/organic aerosol particles to take up water (hygroscopicity. We performed hygroscopicity measurements of internally mixed particles containing ammonium sulfate and carboxylic acids (citric, glutaric, adipic acid in parallel with an electrodynamic balance (EDB and a hygroscopicity tandem differential mobility analyzer (HTDMA. The organic compounds were chosen to represent three distinct physical states. During hygroscopicity cycles covering hydration and dehydration measured by the EDB and the HTDMA, pure citric acid remained always liquid, adipic acid remained always solid, while glutaric acid could be either. We show that the hygroscopicity of mixtures of the above compounds is well described by the Zdanovskii-Stokes-Robinson (ZSR relationship as long as the two-component particle is completely liquid in the ammonium sulfate/citric acid and in the ammonium sulfate/glutaric acid cases. However, we observe significant discrepancies compared to what is expected from bulk thermodynamics when a solid component is present. We explain this in terms of a complex morphology resulting from the crystallization process leading to veins, pores, and grain boundaries which allow for water sorption in excess of bulk thermodynamic predictions caused by the inverse Kelvin effect on concave surfaces.

  12. The global impact of the transport sectors on atmospheric aerosol in 2030 – Part 2: Aviation

    Directory of Open Access Journals (Sweden)

    M. Righi

    2015-12-01

    Full Text Available We use the EMAC (ECHAM/MESSy Atmospheric Chemistry global climate-chemistry model coupled to the aerosol module MADE (Modal Aerosol Dynamics model for Europe, adapted for global applications to simulate the impact of aviation emissions on global atmospheric aerosol and climate in 2030. Emissions of short-lived gas and aerosol species follow the four Representative Concentration Pathways (RCPs designed in support of the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. We compare our findings with the results of a previous study with the same model configuration focusing on year 2000 emissions. We also characterize the aviation results in the context of the other transport sectors presented in a companion paper. In spite of a relevant increase in aviation traffic volume and resulting emissions of aerosol (black carbon and aerosol precursor species (nitrogen oxides and sulfur dioxide, the aviation effect on particle mass concentration in 2030 remains quite negligible (on the order of a few ng m-3, about one order of magnitude less than the increase in concentration due to other emission sources. Due to the relatively small size of the aviation-induced aerosol, however, the increase in particle number concentration is significant in all scenarios (about 1000 cm-3, mostly affecting the northern mid-latitudes at typical flight altitudes (7–12 km. This largely contributes to the overall change in particle number concentration between 2000 and 2030, which results also in significant climate effects due to aerosol-cloud interactions. Aviation is the only transport sector for which a larger impact on the Earth's radiation budget is simulated in the future: The aviation-induced RF in 2030 is more than doubled with respect to the year 2000 value of −15 mW m-2, with a maximum value of −63 mW m-2 simulated for RCP2.6.

  13. The global impact of the transport sectors on atmospheric aerosol in 2030 - Part 2: Aviation

    Science.gov (United States)

    Righi, Mattia; Hendricks, Johannes; Sausen, Robert

    2016-04-01

    We use the EMAC (ECHAM/MESSy Atmospheric Chemistry) global climate-chemistry model coupled to the aerosol module MADE (Modal Aerosol Dynamics model for Europe, adapted for global applications) to simulate the impact of aviation emissions on global atmospheric aerosol and climate in 2030. Emissions of short-lived gas and aerosol species follow the four Representative Concentration Pathways (RCPs) designed in support of the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. We compare our findings with the results of a previous study with the same model configuration focusing on year 2000 emissions. We also characterize the aviation results in the context of the other transport sectors presented in a companion paper. In spite of a relevant increase in aviation traffic volume and resulting emissions of aerosol (black carbon) and aerosol precursor species (nitrogen oxides and sulfur dioxide), the aviation effect on particle mass concentration in 2030 remains quite negligible (on the order of a few ng m-3), about 1 order of magnitude less than the increase in concentration due to other emission sources. Due to the relatively small size of the aviation-induced aerosol, however, the increase in particle number concentration is significant in all scenarios (about 1000 cm-3), mostly affecting the northern mid-latitudes at typical flight altitudes (7-12 km). This largely contributes to the overall change in particle number concentration between 2000 and 2030, which also results in significant climate effects due to aerosol-cloud interactions. Aviation is the only transport sector for which a larger impact on the Earth's radiation budget is simulated in the future: the aviation-induced radiative forcing in 2030 is more than doubled with respect to the year 2000 value of -15 mW m-2 in all scenarios, with a maximum value of -63 mW m-2 simulated for RCP2.6.

  14. Sulfur isotope analyses of individual aerosol particles in the urban aerosol at a central European site (Mainz, Germany

    Directory of Open Access Journals (Sweden)

    B. Winterholler

    2008-05-01

    Full Text Available Sulfur isotope analysis of atmospheric aerosols is a well established tool for identifying sources of sulfur in the atmosphere, estimating emission factors, and tracing the spread of sulfur from anthropogenic sources through ecosystems. Conventional gas mass spectrometry averages the isotopic compositions of several different types of sulfur aerosol particles, and therefore masks the individual isotopic signatures. In contrast, the new single particle technique presented here determines the isotopic signature of the individual particles.

    Primary aerosol particles retain the original isotopic signature of their source. The isotopic composition of secondary sulfates depends on the isotopic composition of precursor SO2 and the oxidation process. The fractionation with respect to the source SO2 is −9‰ for homogeneous and +16.5‰ for heterogeneous oxidation. The sulfur isotope ratio of secondary sulfate particles can therefore be used to identify the oxidation pathway by which this sulfate was formed. With the new single particle technique, different types of primary and secondary sulfates were first identified based on their chemical composition, and then their individual isotopic signature was measured separately. Our samples were collected in Mainz, Germany, in an urban environment. Secondary sulfates (ammonium sulfate, gypsum, mixed sulfates and coatings on silicates or organic aerosol dominated sulfate loadings in our samples. Comparison of the chemical and isotopic composition of secondary sulfates showed that the isotopic composition was homogeneous, independent of the chemical composition. This is typical for particles that derive from in-cloud processing. The isotopic composition of the source SO2 of secondary sulfates was calculated based on the isotopic composition of particles with known oxidation pathway and showed a strong dependence on wind direction. The contribution of heterogeneous

  15. Accommodation coefficient of HOBr on deliquescent sodium bromide aerosol particles

    Directory of Open Access Journals (Sweden)

    M. Wachsmuth

    2002-01-01

    Full Text Available Uptake of HOBr on sea salt aerosol, sea salt brine or ice is believed to be a key process providing a source of photolabile bromine (Br2 and sustaining ozone depletion cycles in the Arctic troposphere. In the present study, uptake of HOBr on sodium bromide (NaBr aerosol particles was investigated at an extremely low HOBr concentration of 300 cm-3 using the short-lived radioactive isotopes 83-86Br. Under these conditions, at maximum one HOBr molecule was taken up per particle. The rate of uptake was clearly limited by the mass accommodation coefficient, which was calculated to be 0.6 ± 0.2. This value is a factor of 10 larger than estimates used in earlier models. The atmospheric implications are discussed using the box model "MOCCA'', showing that the increase of the accommodation coefficient of HOBr by a factor of 10 only slightly affects net ozone loss, but significantly increases chlorine release.

  16. NUMBER CONCENTRATION, SIZE DISTRIBUTION AND FINE PARTICLE FRACTION OF TROPOSPHERIC AND STRATOSPHERIC AEROSOLS

    Institute of Scientific and Technical Information of China (English)

    Li Xu; Guangyu Shi; Li Zhang; Jun Zhou; Yasunobu Iwasaka

    2003-01-01

    Aerosol observations were carried out at Xianghe Scientific Balloon Base (39.45°N, 117°E) using a stratospheric balloon. The particle number concentrations of the tropospheric and stratospheric aerosols were directly explored.The vertical distributions of the number concentration, number-size (that is, particle number versus particle size)distribution, and the fraction of fine particles (0.5 μm>r>0.15 μm/r>0.15 μm) are reported in this paper. The profiles of particle concentration present multi-peak phenomenon. The pattern of size distribution for atmospheric aerosol indicates a tri-modal (r=~0.2 μm, ~0.88 μm and ~7.0 μm) and a bi-modal (r=~0.13 μm and 2.0 μm). The number-size distribution almost fits the Junge distribution for particles with r<0.5 μm in the stratosphere of 1993 and the troposphere of 1994. But the distributions of coarse particles (r>0.5 μm) are not uniform. The number-size distribution exhibits also a wide size range in the troposphere of 1993. The results demonstrate that fine particles represent the major portion in the troposphere during the measurement period, reaching as high as 95% in 1994. Certain coarse particle peaks in the troposphere were attributed to clouds and other causes, and in the stratosphere to volcanic eruption. The stratospheric aerosol layer consists of unique fractions of fine or coarse particles depending on their sources. In summary, the process of gas-to-particles conversion was active and the coarse particles were rich over the Xianghe area. The measurements also demonstrate that the spatial and temporal atmospheric aerosol distributions are nonuniform and changeful.

  17. The electrical charging of inactive aerosols in high ionised atmosphere, the electrical charging of artificial beta radioactive aerosols; Le processus de charge electrique: des aerosols non radioactifs en milieu fortement ionise, des aerosols radioactifs artificiels emetteurs beta

    Energy Technology Data Exchange (ETDEWEB)

    Gensdarmes, F

    2000-07-01

    The electrical properties of aerosols greatly influence their transport and deposition in a containment. In a bipolar ionic atmosphere, a neutral electric charge on aerosols is commonly assumed. However, many studies report a different charge distribution in some situations, like highly ionised atmosphere or in the case of radioactive aerosols. Such situations could arise from a hypothetical accident in a nuclear power plant. Within the framework of safety studies which are carried out at IPSN, our aims were the study of electrical properties of aerosols in highly ionised atmosphere, and the study of artificial radioactive aerosols, in order to suggest experimental validation of available theories. For this purpose, we designed an experimental device that allows us to measure non-radioactive aerosol charge distribution under high gamma irradiation, up to 10{sup 4} Gy/h. With our experimental device we also studied the properties of small ions in the medium. Our results show a variation of the charge distribution in highly ionised atmosphere. The charge increases with the dose of gamma ray. We have related this variation with the one of the small ions in the gases, according to theoretical prediction. However, the model overestimates slightly our experimental results. In the case of the radioactive aerosols, we have designed an original experimental device, which allows us to study the charge distribution of a {sup 137}Cs aerosol. Our results show that the electric charging of such aerosols is strongly dependent on evolution parameters in a containment. So, our results underline a great enhancement of self-charging of particles which are sampled in a confined medium. Our results are qualitatively in agreement with the theoretical model; nevertheless the latter underestimates appreciably the self-charging, owing to the fact that wall effects are not taken into account. (author)

  18. Role of sulphuric acid, ammonia and galactic cosmic rays in atmospheric aerosol nucleation

    CERN Document Server

    Kirkby, Jasper; Almeida, João; Dunne, Eimear; Duplissy, Jonathan; Ehrhart, Sebastian; Franchin, Alessandro; Gagné, Stéphanie; Ickes, Luisa; Kürten, Andreas; Kupc, Agnieszka; Metzger, Axel; Riccobono, Francesco; Rondo, Linda; Schobesberger, Siegfried; Tsagkogeorgas, Georgios; Wimmer, Daniela; Amorim, Antonio; Bianchi, Federico; Breitenlechner, Martin; David, André; Dommen, Josef; Downard, Andrew; Ehn, Mikael; Flagan, Richard C; Haider, Stefan; Hansel, Armin; Hauser, Daniel; Jud, Werner; Junninen, Heikki; Kreissl, Fabian; Kvashin, Alexander; Laaksonen, Ari; Lehtipalo, Katrianne; Lima, Jorge; Lovejoy, Edward R; Makhmutov, Vladimir; Mathot, Serge; Mikkilä, Jyri; Minginette, Pierre; Mogo, Sandra; Nieminen, Tuomo; Onnela, Antti; Pereira, Paulo; Petäjä, Tuukka; Schnitzhofer, Ralf; Seinfeld, John H; Sipilä, Mikko; Stozhkov, Yuri; Stratmann, Frank; Tomé, Antonio; Vanhanen, Joonas; Viisanen, Yrjo; Vrtala, Aron; Wagner, Paul E; Walther, Hansueli; Weingartner, Ernest; Wex, Heike; Winkler, Paul M; Carslaw, Kenneth S; Worsnop, Douglas R; Baltensperger, Urs; Kulmala, Markku

    2011-01-01

    Atmospheric aerosols exert an important influence on climate1 through their effects on stratiform cloud albedo and lifetime2 and the invigoration of convective storms3. Model calculations suggest that almost half of the global cloud condensation nuclei in the atmospheric boundary layer may originate from the nucleation of aerosols from trace condensable vapours4, although the sensitivity of the number of cloud condensation nuclei to changes of nucleation rate may be small5, 6. Despite extensive research, fundamental questions remain about the nucleation rate of sulphuric acid particles and the mechanisms responsible, including the roles of galactic cosmic rays and other chemical species such as ammonia7. Here we present the first results from the CLOUD experiment at CERN. We find that atmospherically relevant ammonia mixing ratios of 100 parts per trillion by volume, or less, increase the nucleation rate of sulphuric acid particles more than 100–1,000-fold. Time-resolved molecular measurements reveal that n...

  19. Morphology and Optical Properties of Mixed Aerosol Particles

    Science.gov (United States)

    Fard, Mehrnoush M.; Krieger, Ulrich; Rudich, Yinon; Marcolli, Claudia; Peter, Thomas

    2016-04-01

    Experiments and modeling studies have shown that deliquesced aerosols can exist not only as one-phase system containing organics, inorganic salts and water, but often as two-phase systems consisting of a predominantly organic and a predominantly inorganic aqueous phase (1,2). Recent laboratory studies conducted with model mixtures representing tropospheric aerosols (1,2,3), secondary organic aerosol (SOA) from smog chamber experiments (4), and field measurements (5) suggest that liquid-liquid phase separations (LLPS) is indeed a common phenomenon in mixed organic/ inorganic particles. During LLPS, particles may adopt different morphologies mainly core-shell and partially engulfed. A core-shell configuration will have consequences for heterogeneous chemistry and hygroscopicity and as a result will alter the optical properties of the particles in particular for organic phases containing absorbing molecules, e.g. brown carbon. The primary objective of this project is to establish a method for investigating the morphology of mixed inorganic and absorbing organic compounds of atmospheric relevance and study their radiative properties before, during, and after phase transitions mainly during LLPS. This will be the first study looking into the radiative effect of LLPS in detail. Our ternary model system consist of ammonium sulfate (AS)/ Polyethylene Glycol (PEG)/ and water (H2O). Carminic acid (CA) was added as a proxy for an absorbing organic compound to the system. The behavior of single droplets of above ternary mixture was monitored during relative humidity (RH) cycles using optical microscopy. The same ternary mixture particle was levitated in an electrodynamic balance (EDB) and the change in its absorption properties was measured at varying RH. In addition, Mie-code modeling is used to predict the absorption efficiency of the same ternary system and the result will be compared with the data obtained from EDB experiment. We also intend to determine the occurrence of

  20. Modelling iodide – iodate speciation in atmospheric aerosol: Contributions of inorganic and organic iodine chemistry

    Directory of Open Access Journals (Sweden)

    S. Pechtl

    2007-01-01

    Full Text Available The speciation of iodine in atmospheric aerosol is currently poorly understood. Models predict negligible iodide concentrations but accumulation of iodate in aerosol, both of which is not confirmed by recent measurements. We present an updated aqueous phase iodine chemistry scheme for use in atmospheric chemistry models and discuss sensitivity studies with the marine boundary layer model MISTRA. These studies show that iodate can be reduced in acidic aerosol by inorganic reactions, i.e., iodate does not necessarily accumulate in particles. Furthermore, the transformation of particulate iodide to volatile iodine species likely has been overestimated in previous model studies due to negligence of collision-induced upper limits for the reaction rates. However, inorganic reaction cycles still do not seem to be sufficient to reproduce the observed range of iodide – iodate speciation in atmospheric aerosol. Therefore, we also investigate the effects of the recently suggested reaction of HOI with dissolved organic matter to produce iodide. If this reaction is fast enough to compete with the inorganic mechanism, it would not only directly lead to enhanced iodide concentrations but, indirectly via speed-up of the inorganic iodate reduction cycles, also to a decrease in iodate concentrations. Hence, according to our model studies, organic iodine chemistry, combined with inorganic reaction cycles, is able to reproduce observations. The presented chemistry cycles are highly dependent on pH and thus offer an explanation for the large observed variability of the iodide – iodate speciation in atmospheric aerosol.

  1. Molecular understanding of sulphuric acid-amine particle nucleation in the atmosphere

    CERN Document Server

    Almeida, João; Kürten, Andreas; Ortega, Ismael K; Kupiainen-Määttä, Oona; Praplan, Arnaud P; Adamov, Alexey; Amorim, Antonio; Bianchi, Federico; Breitenlechner, Martin; David, André; Dommen, Josef; Donahue, Neil M; Downard, Andrew; Dunne, Eimear; Duplissy, Jonathan; Ehrhart, Sebastian; Flagan, Richard C; Franchin, Alessandro; Guida, Roberto; Hakala, Jani; Hansel, Armin; Heinritzi, Martin; Henschel, Henning; Jokinen, Tuija; Junninen, Heikki; Kajos, Maija; Kangasluoma, Juha; Keskinen, Helmi; Kupc, Agnieszka; Kurtén, Theo; Kvashin, Alexander N; Laaksonen, Ari; Lehtipalo, Katrianne; Leiminger, Markus; Leppä, Johannes; Loukonen, Ville; Makhmutov, Vladimir; Mathot, Serge; McGrath, Matthew J; Nieminen, Tuomo; Olenius, Tinja; Onnela, Antti; Petäjä, Tuukka; Riccobono, Francesco; Riipinen, Ilona; Rissanen, Matti; Rondo, Linda; Ruuskanen, Taina; Santos, Filipe D; Sarnela, Nina; Schallhart, Simon; Schnitzhofer, Ralf; Seinfeld, John H; Simon, Mario; Sipilä, Mikko; Stozhkov, Yuri; Stratmann, Frank; Tomé, Antonio; Tröstl, Jasmin; Tsagkogeorgas, Georgios; Vaattovaara, Petri; Viisanen, Yrjo; Virtanen, Annele; Vrtala, Aron; Wagner, Paul E; Weingartner, Ernest; Wex, Heike; Williamson, Christina; Wimmer, Daniela; Ye, Penglin; Yli-Juuti, Taina; Carslaw, Kenneth S; Kulmala, Markku; Curtius, Joachim; Baltensperger, Urs; Vehkamaki, Hanna; Kirkby, Jasper

    2013-01-01

    Nucleation of aerosol particles from trace atmospheric vapours is thought to provide up to half of global cloud condensation nuclei. Aerosols can cause a net cooling of climate by scattering sunlight and by leading to smaller but more numerous cloud droplets, which makes clouds brighter and extends their lifetimes. Atmospheric aerosols derived from human activities are thought to have compensated for a large fraction of the warming caused by greenhouse gases. However, despite its importance for climate, atmospheric nucleation is poorly understood. Recently, it has been shown that sulphuric acid and ammonia cannot explain particle formation rates observed in the lower atmosphere. It is thought that amines may enhance nucleation, but until now there has been no direct evidence for amine ternary nucleation under atmospheric conditions. Here we use the CLOUD (Cosmics Leaving OUtdoor Droplets) chamber at CERN and find that dimethylamine above three parts per trillion by volume can enhance particle formation rates ...

  2. Marine aerosols

    OpenAIRE

    Saltzman, Es

    2009-01-01

    The aerosol over the world oceans plays an important role in determining the physical and chemical characteristics of the Earth's atmosphere and its interactions with the climate system. The oceans contribute to the aerosols in the overlying atmosphere by the production and emission of aerosol particles and precursor gases. The marine aerosol, in turn, influences the biogeochemistry of the surface ocean through long distance transport and deposition of terrestrial and marine-derived nutrients...

  3. Measurement of the electrostatic charge in airborne particles: II - particle charge distribution of different aerosols

    Directory of Open Access Journals (Sweden)

    M. V. Rodrigues

    2006-03-01

    Full Text Available This work gives sequence to the study on the measurement of the electrostatic charges in aerosols. The particle charge classifier developed for this purpose and presented in the previous paper (Marra and Coury, 2000 has been used here to measure the particle charge distribution of a number of different aerosols. The charges acquired by the particles were naturally derived from the aerosol generation procedure itself. Two types of aerosol generators were used: the vibrating orifice generator and turntable Venturi plate generator. In the vibrating orifice generator, mono-dispersed particles were generated by a solution of water/ethanol/methylene blue, while in the rotating plate generator, six different materials were utilized. The results showed no clear dependence between electric charge and particle diameter for the mono-dispersed aerosol. However, for the poly-dispersed aerosols, a linear dependence between particle size and charge could be noticed.

  4. INAA and PIXE of atmospheric and combustion aerosols.

    Science.gov (United States)

    Kucera, J; Havránek, V; Smolík, J; Schwarz, J; Veselý, V; Kugler, J; Sýkorová, I; Santroch, J

    1999-01-01

    Using instrumental neutron activation analyses and photon-induced x-ray emission techniques for analysis of size-fractionated atmospheric and combustion aerosols and other emission samples arising from fluidized-bed combustion of North Bohemian lignites up to 42 elements were determined in all samples types. This allowed the evaluation of element enrichment, time trends, and inter-element correlations and the performance of factor analysis of various fractions of atmospheric aerosols. The data obtained on mass and element size distributions of aerosols and emission samples obtained upon lignite combustion in an experimental scale atmospheric fluidized-bed combustor without and with added hydrated lime and limestone were used to elucidate the mechanism of abatement of toxic trace and matrix elements from flue gas. PMID:10676497

  5. Inverse atmospheric radiative transfer problems - A nonlinear minimization search method of solution. [aerosol pollution monitoring

    Science.gov (United States)

    Fymat, A. L.

    1976-01-01

    The paper studies the inversion of the radiative transfer equation describing the interaction of electromagnetic radiation with atmospheric aerosols. The interaction can be considered as the propagation in the aerosol medium of two light beams: the direct beam in the line-of-sight attenuated by absorption and scattering, and the diffuse beam arising from scattering into the viewing direction, which propagates more or less in random fashion. The latter beam has single scattering and multiple scattering contributions. In the former case and for single scattering, the problem is reducible to first-kind Fredholm equations, while for multiple scattering it is necessary to invert partial integrodifferential equations. A nonlinear minimization search method, applicable to the solution of both types of problems has been developed, and is applied here to the problem of monitoring aerosol pollution, namely the complex refractive index and size distribution of aerosol particles.

  6. Improvement of aerosol counterflow two-jets unit for continuous measurement of water soluble components of atmospheric aerosols

    Czech Academy of Sciences Publication Activity Database

    Mikuška, Pavel; Kořínková, Alena; Večeřa, Zbyněk

    Italian Aerosol Society, 2015. 2ACH_P033. [European Aerosol Conference EAC 2015. 06.09.2015-11.09.2015, Milano] R&D Projects: GA ČR(CZ) GA14-25558S Institutional support: RVO:68081715 Keywords : aerosol instrumentation * aerosol particles * chemical composition Subject RIV: CB - Analytical Chemistry, Separation

  7. Development of a 10 Hz measurement system for atmospheric aerosol concentration

    International Nuclear Information System (INIS)

    The goal is to develop an aerosol charger based on a corona discharge for atmospheric concentration measurements (103-105 cm-3) within a response time of 100 ms. Two ion sources, point-to-hole and wire-to-slit have been characterized. The increase of the ion flow in the post-discharge by EHD ion confinement in both the discharge gap and the hole has been shown. At first, using an experimental survey driven in two mixing configurations, concentric and face-to-face, we have confirmed the aerosol diffusion charging law which depends on aerosol diameter and Ni.t product, with Ni, the ions concentration and t, the charging time. Thus, the originality of this charger relies on the very high heterogeneity of unipolar ion densities (Ni0 ≥109 cm-3) required to compensate the charging time of 50 ms. In these conditions, we have shown that aerosol diameter and the charging dynamic (which depends also on the diameter) control the aerosol trajectory. The chargers have, next, been compared in different operating conditions, mainly in terms of the maximal charging and the minimal losses. In the chosen charger (point-to-hole ion source and concentric mixing), the relations charge/mobility and losses according to diameter have been characterized. We have also shown the linearity of the charged particles current with the aerosol concentration which allows the current-concentration data inversion. The preliminary measurement system composed by the charger, the separator and the particle current measurements, satisfies the objectives of the study in terms of the concentration detection limit (103 cm-3) and the response time (100 ms). We have thus shown the feasibility of an atmospheric aerosol concentration measurement system at 10 Hz using a corona discharge charger provided that the separation power is improved. Furthermore, knowing that aerosol losses are negligible and the lower limit of the partial charging, the developed charger is adaptable with other application. (author)

  8. Particle concentration and flux dynamics in the atmospheric boundary layer as the indicator of formation mechanism

    Directory of Open Access Journals (Sweden)

    J. Lauros

    2010-08-01

    Full Text Available We carried out column model simulations to study particle fluxes and deposition and to evaluate different particle formation mechanisms at a boreal forest site in Finland. We show that kinetic nucleation of sulphuric acid cannot be responsible for new particle formation alone as the vertical profile of particle number distribution does not correspond to observations. Instead organic induced nucleation leads to good agreement confirming the relevance of the aerosol formation mechanism including organic compounds emitted by biosphere.

    Simulation of aerosol concentration inside the atmospheric boundary layer during nucleation days shows highly dynamical picture, where particle formation is coupled with chemistry and turbulent transport. We have demonstrated suitability of our turbulent mixing scheme in reproducing most important characteristics of particle dynamics inside the atmospheric boundary layer. Deposition and particle flux simulations show that deposition affects noticeably only the smallest particles at the lowest part of the atmospheric boundary layer.

  9. Behaviour of Well Defined Aerosol Particles in a Test Chamber

    Czech Academy of Sciences Publication Activity Database

    Ondráček, Jakub; Brand, M.; Barták, M.; Ondráčková, Lucie; Smolík, Jiří

    -: -, 2009, T108A13. [European Aerosol Conference 2009. Karlsruhe (DE), 06.09.2009-11.09.2009] R&D Projects: GA ČR GA101/07/1361 Institutional research plan: CEZ:AV0Z40720504 Keywords : indoor aerosols * particle deposition * coagulation Subject RIV: CF - Physical ; Theoretical Chemistry

  10. Trace elements in atmospheric aerosols from background regions and biomass burning from the Amazon Basin

    International Nuclear Information System (INIS)

    Aerosol particles from the tropical rain forest and from savannah biomass burning were collected in several experiments in the Amazon Basin. The size distribution of atmospheric trace elements was measured under both background and biomass burning conditions. Sampling from aircraft was performed over a large area of the Amazon Basin in August/September 1991. The aerosol mass concentration, black carbon and trace element concentrations were determined for fine and coarse aerosol particles. Particle induced X ray emission (PIXE) was used to measure the concentrations of up to 22 elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Zr and Pb. During the dry season, when most of the biomass burning occurs, the concentration of inhalable particles exceeds 300 μg/m3 in regions far from the direct influence of emissions from biomass burning. Large amounts of fine particles are injected into the atmosphere, where they can travel over long distances. These particles are rich in K, P, S, Ca, Mg, Cl, Si, Zn, Rb, Sr, Zr and other trace elements. The emissions of trace elements and heavy metals into the global atmosphere owing to biomass burning are very significant, but are currently not considered in global atmospheric heavy metal inventories. Several essential nutrients, such as P, K, S and others, are transported into the atmosphere as a result of biomass burning processes. Most of the particles are water soluble and can be active as cloud condensation nuclei, with the potential to change the cloud formation mechanisms in the Amazon Basin and other regions of the planet. 22 refs, 5 figs, 1 tab

  11. Aerosolization, Chemical Characterization, Hygroscopicity and Ice Formation of Marine Biogenic Particles

    Science.gov (United States)

    Alpert, P. A.; Radway, J.; Kilthau, W.; Bothe, D.; Knopf, D. A.; Aller, J. Y.

    2013-12-01

    The oceans cover the majority of the earth's surface, host nearly half the total global primary productivity and are a major source of atmospheric aerosol particles. However, effects of biological activity on sea spray generation and composition, and subsequent cloud formation are not well understood. Our goal is to elucidate these effects which will be particularly important over nutrient rich seas, where microorganisms can reach concentrations of 10^9 per mL and along with transparent exopolymer particles (TEP) can become aerosolized. Here we report the results of mesocosm experiments in which bubbles were generated by two methods, either recirculating impinging water jets or glass frits, in natural or artificial seawater containing bacteria and unialgal cultures of three representative phytoplankton species, Thalassiosira pseudonana, Emiliania huxleyi, and Nannochloris atomus. Over time we followed the size distribution of aerosolized particles as well as their hygroscopicity, heterogeneous ice nucleation potential, and individual physical-chemical characteristics. Numbers of cells and the mass of dissolved and particulate organic carbon (DOC, POC), TEP (which includes polysaccharide-containing microgels and nanogels >0.4 μm in diameter) were determined in the bulk water, the surface microlayer, and aerosolized material. Aerosolized particles were also impacted onto substrates for ice nucleation and water uptake experiments, elemental analysis using computer controlled scanning electron microscopy and energy dispersive analysis of X-rays (CCSEM/EDX), and determination of carbon bonding with scanning transmission X-ray microscopy and near-edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). Regardless of bubble generation method, the overall concentration of aerosol particles, TEP, POC and DOC increased as concentrations of bacterial and phytoplankton cells increased, stabilized, and subsequently declined. Particles Aerosolized particles were

  12. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles – Part 2: First results from balloon and unmanned aerial vehicle flights

    Directory of Open Access Journals (Sweden)

    J.-B. Renard

    2015-09-01

    Full Text Available In the companion paper (Renard et al., 2015, we have described and evaluated a new versatile optical particle counter/sizer named LOAC (Light Optical Aerosol Counter based on scattering measurements at angles of 12 and 60° that allows some topology identification of particles (droplets, carbonaceous, salts, and mineral dust in addition to size segregated counting in a large diameter range from 0.2 up to possibly more than 100 μm depending on sampling conditions. Its capabilities overpass those of preceding optical particle counters (OPCs allowing the characterization of all kind of aerosols from submicronic-sized absorbing carbonaceous particles in polluted air to very coarse particles (> 10–20 μm in diameter in desert dust plumes or fog and clouds. LOAC's light and compact design allows measurements under all kinds of balloons, on-board unmanned aerial vehicles (UAV and at ground level. We illustrate here the first LOAC airborne results obtained from an unmanned aerial vehicle (UAV and a variety of scientific balloons. The UAV was deployed in a peri-urban environment near Bordeaux in France. Balloon operations include (i tethered balloons deployed in urban environments in Vienna (Austria and Paris (France, (ii pressurized balloons drifting in the lower troposphere over the western Mediterranean (during the Chemistry-Aerosol Mediterranean Experiment – ChArMEx campaigns, (iii meteorological sounding balloons launched in the western Mediterranean region (ChArMEx and from Aire-sur-l'Adour in south-western France (VOLTAIRE-LOAC campaign. More focus is put on measurements performed in the Mediterranean during (ChArMEx and especially during African dust transport events to illustrate the original capability of balloon-borne LOAC to monitor in situ coarse mineral dust particles. In particular, LOAC has detected unexpected large particles in desert sand plumes.

  13. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles - Part 2: First results from balloon and unmanned aerial vehicle flights

    Science.gov (United States)

    Renard, Jean-Baptiste; Dulac, François; Berthet, Gwenaël; Lurton, Thibaut; Vignelles, Damien; Jégou, Fabrice; Tonnelier, Thierry; Jeannot, Matthieu; Couté, Benoit; Akiki, Rony; Verdier, Nicolas; Mallet, Marc; Gensdarmes, François; Charpentier, Patrick; Mesmin, Samuel; Duverger, Vincent; Dupont, Jean-Charles; Elias, Thierry; Crenn, Vincent; Sciare, Jean; Zieger, Paul; Salter, Matthew; Roberts, Tjarda; Giacomoni, Jérôme; Gobbi, Matthieu; Hamonou, Eric; Olafsson, Haraldur; Dagsson-Waldhauserova, Pavla; Camy-Peyret, Claude; Mazel, Christophe; Décamps, Thierry; Piringer, Martin; Surcin, Jérémy; Daugeron, Daniel

    2016-08-01

    In the companion (Part I) paper, we have described and evaluated a new versatile optical particle counter/sizer named LOAC (Light Optical Aerosol Counter), based on scattering measurements at angles of 12 and 60°. That allows for some typology identification of particles (droplets, carbonaceous, salts, and mineral dust) in addition to size-segregated counting in a large diameter range from 0.2 µm up to possibly more than 100 µm depending on sampling conditions (Renard et al., 2016). Its capabilities overpass those of preceding optical particle counters (OPCs) allowing the characterization of all kind of aerosols from submicronic-sized absorbing carbonaceous particles in polluted air to very coarse particles (> 10-20 µm in diameter) in desert dust plumes or fog and clouds. LOAC's light and compact design allows measurements under all kinds of balloons, on-board unmanned aerial vehicles (UAVs) and at ground level. We illustrate here the first LOAC airborne results obtained from a UAV and a variety of scientific balloons. The UAV was deployed in a peri-urban environment near Bordeaux in France. Balloon operations include (i) tethered balloons deployed in urban environments in Vienna (Austria) and Paris (France), (ii) pressurized balloons drifting in the lower troposphere over the western Mediterranean (during the Chemistry-Aerosol Mediterranean Experiment - ChArMEx campaigns), (iii) meteorological sounding balloons launched in the western Mediterranean region (ChArMEx) and from Aire-sur-l'Adour in south-western France (VOLTAIRE-LOAC campaign). More focus is put on measurements performed in the Mediterranean during (ChArMEx) and especially during African dust transport events to illustrate the original capability of balloon-borne LOAC to monitor in situ coarse mineral dust particles. In particular, LOAC has detected unexpected large particles in desert sand plumes.

  14. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles - Part 2: First results from balloon and unmanned aerial vehicle flights

    Science.gov (United States)

    Renard, J.-B.; Dulac, F.; Berthet, G.; Lurton, T.; Vignelles, D.; Jégou, F.; Tonnelier, T.; Thaury, C.; Jeannot, M.; Couté, B.; Akiki, R.; Verdier, N.; Mallet, M.; Gensdarmes, F.; Charpentier, P.; Mesmin, S.; Duverger, V.; Dupont, J. C.; Elias, T.; Crenn, V.; Sciare, J.; Giacomoni, J.; Gobbi, M.; Hamonou, E.; Olafsson, H.; Dagsson-Waldhauserova, P.; Camy-Peyret, C.; Mazel, C.; Décamps, T.; Piringer, M.; Surcin, J.; Daugeron, D.

    2015-09-01

    In the companion paper (Renard et al., 2015), we have described and evaluated a new versatile optical particle counter/sizer named LOAC (Light Optical Aerosol Counter) based on scattering measurements at angles of 12 and 60° that allows some topology identification of particles (droplets, carbonaceous, salts, and mineral dust) in addition to size segregated counting in a large diameter range from 0.2 up to possibly more than 100 μm depending on sampling conditions. Its capabilities overpass those of preceding optical particle counters (OPCs) allowing the characterization of all kind of aerosols from submicronic-sized absorbing carbonaceous particles in polluted air to very coarse particles (> 10-20 μm in diameter) in desert dust plumes or fog and clouds. LOAC's light and compact design allows measurements under all kinds of balloons, on-board unmanned aerial vehicles (UAV) and at ground level. We illustrate here the first LOAC airborne results obtained from an unmanned aerial vehicle (UAV) and a variety of scientific balloons. The UAV was deployed in a peri-urban environment near Bordeaux in France. Balloon operations include (i) tethered balloons deployed in urban environments in Vienna (Austria) and Paris (France), (ii) pressurized balloons drifting in the lower troposphere over the western Mediterranean (during the Chemistry-Aerosol Mediterranean Experiment - ChArMEx campaigns), (iii) meteorological sounding balloons launched in the western Mediterranean region (ChArMEx) and from Aire-sur-l'Adour in south-western France (VOLTAIRE-LOAC campaign). More focus is put on measurements performed in the Mediterranean during (ChArMEx) and especially during African dust transport events to illustrate the original capability of balloon-borne LOAC to monitor in situ coarse mineral dust particles. In particular, LOAC has detected unexpected large particles in desert sand plumes.

  15. Monodisperse Aerosol Particles in an Apartment

    Czech Academy of Sciences Publication Activity Database

    Ondráček, Jakub; Ondráčková, Lucie; Stavová, P.; Ždímal, Vladimír; Barták, M.; Smolík, Jiří

    Thessaloniki : Hellenic Association for Aerosol Research, 2008, T10A012P. [European Aerosol Conference 2008. Thessaloniki (GR), 24.08.2008-29.08.2008] R&D Projects: GA ČR GA101/07/1361 Institutional research plan: CEZ:AV0Z40720504 Keywords : indoor aerosols * dynamic characteristics * number size distribution Subject RIV: CF - Physical ; Theoretical Chemistry www.eac2008.org

  16. New ARM Measurements of Clouds, Aerosols, and the Atmospheric State

    Science.gov (United States)

    Mather, J.

    2012-04-01

    The DOE Atmospheric Radiation Measurement (ARM) program has recently enhanced its observational capabilities at its fixed and mobile sites as well as its aerial facility. New capabilities include scanning radars, several types of lidars, an array of aerosol instruments, and in situ cloud probes. All ARM sites have been equipped with dual frequency scanning cloud radars that will provide three-dimensional observations of cloud fields for analysis of cloud field evolution. Sites in Oklahoma, Alaska, and Papua New Guinea have also received scanning centimeter wavelength radars for observing precipitation fields. This combination of radars will provide the means to study the interaction of clouds and precipitation. New lidars include a Raman lidar in Darwin, Australia and High Spectral Resolution Lidars in Barrow and with the second ARM Mobile Facility. Each of these lidars will provide profiles of aerosol extinction while the Raman will also measure profiles of water vapor. ARM has also expanded its capabilities in the realm of aerosol observations. ARM is adding Aerosol Observing Systems to its sites in Darwin and the second mobile facility. These aerosol systems principally provided measurements of aerosol optical properties. In addition, a new Mobile Aerosol Observing System has been developed that includes a variety of instruments to provide information about aerosol chemistry and size distributions. Many of these aerosol instruments are also available for the ARM Aerial Facility. The Aerial Facility also now includes a variety of cloud probes for measuring size distribution and water content. The new array of ARM instruments is intended to build upon the existing ARM capabilities to better study the interactions among aerosol, clouds, and precipitation. Data from these instruments are now available and development of advanced data products is underway.

  17. Characterization of a Quadrotor Unmanned Aircraft System for Aerosol-Particle-Concentration Measurements.

    Science.gov (United States)

    Brady, James M; Stokes, M Dale; Bonnardel, Jim; Bertram, Timothy H

    2016-02-01

    High-spatial-resolution, near-surface vertical profiling of atmospheric chemical composition is currently limited by the availability of experimental platforms that can sample in constrained environments. As a result, measurements of near-surface gradients in trace gas and aerosol particle concentrations have been limited to studies conducted from fixed location towers or tethered balloons. Here, we explore the utility of a quadrotor unmanned aircraft system (UAS) as a sampling platform to measure vertical and horizontal concentration gradients of trace gases and aerosol particles at high spatial resolution (1 m) within the mixed layer (0-100 m). A 3D Robotics Iris+ autonomous quadrotor UAS was outfitted with a sensor package consisting of a two-channel aerosol optical particle counter and a CO2 sensor. The UAS demonstrated high precision in both vertical (±0.5 m) and horizontal positions (±1 m), highlighting the potential utility of quadrotor UAS drones for aerosol- and trace-gas measurements within complex terrain, such as the urban environment, forest canopies, and above difficult-to-access areas such as breaking surf. Vertical profiles of aerosol particle number concentrations, acquired from flights conducted along the California coastline, were used to constrain sea-spray aerosol-emission rates from coastal wave breaking. PMID:26730457

  18. Common Inorganic Salts Catalyze the Transformations of Organic Compounds in Atmospheric Aerosols

    Science.gov (United States)

    Noziere, B.; Dziedzic, P.; Cordova, A.

    2008-12-01

    This presentation reports the discovery that inorganic salts that are ubiquitous in atmospheric aerosols are efficient catalysts for the transformations of organic compounds in these aerosols, by reactions such as aldol condensation or acetal formation.1 For some of these salts, these catalytic properties were not even known in chemistry.2 Kinetic and product studies of these reactions will be presented for carbonyl compounds such as acetaldehyde, acetone, and glyoxal,1,3 and compared with previously known catalysts such as the recently discovered amino acids.4,5 These studies show that these salts make the reactions as fast in typical tropospheric aerosols as in concentrated sulfuric acid. These reactions produce secondary "fulvic" compounds that absorb light in the near UV and visible and would affect the optical properties of aerosols.1,5 They would also account for the depletion of glyoxal recently reported in Mexico city.3 Thus, while acid catalysis is several orders of magnitudes too slow to be significant in tropospheric aerosols, this work identifies new processes that should be ubiquitous in these aerosols and important for atmospheric chemistry. Refs. 1Noziere, B., Dziedzic, P., Cordova, A., Common inorganic ions catalyze chemical reactions of organic compounds in atmospheric aerosols, Submitted, 2008. 2 Noziere, B., Cordova, A., A novel catalyst for aldol condensation reaction, patent pending 02/10/2007. 3Noziere, B., Dziedzic, P., Cordova, A., Products and kinetics of the liquid-phase reaction of glyoxal catalyzed by inorganic ions, Submitted to J. Phys. Chem. A, 2008. 4Noziere, B., and Cordova, A., A Kinetic and Mechanistic Study of the Amino Acid-Catalyzed Aldol Condensation of Acetaldehyde in Aqueous and Salt Solutions, J. Phys. Chem. A, 112, 2827, 2008. 5Noziere, B., Dziedzic, P., and Cordova, A., The Formation of Secondary Light-Absorbing "fulvic-like" Oligomers: A Common Process in Aqueous and Ionic Atmospheric Particles?, Geophys. Res. Lett., 34

  19. Effective Density and Mixing State of Aerosol Particles in a Near-Traffic Urban Environment

    DEFF Research Database (Denmark)

    Rissler, Jenny; Nordin, Erik Z; Eriksson, Axel C;

    2014-01-01

    In urban environments, airborne particles are continuously emitted, followed by atmospheric aging. Also, particles emitted elsewhere, transported by winds, contribute to the urban aerosol. We studied the effective density (mass-mobility relationship) and mixing state with respect to the density of...... particles in central Copenhagen, in wintertime. The results are related to particle origin, morphology, and aging. Using a differential mobility analyzer-aerosol particle mass analyzer (DMA-APM), we determined that particles in the diameter range of 50-400 nm were of two groups: porous soot aggregates and......-range transport from polluted continental areas. The effective density of each group was relatively stable over time, especially of the soot aggregates, which had effective densities similar to those observed in laboratory studies of fresh diesel exhaust emissions. When heated to 300 °C, the soot aggregate...

  20. Evidence for a High Proportion of Atmospheric Organic Aerosol from Isoprene

    Science.gov (United States)

    Robinson, Niall H.; Hamilton, Jacqueline F.; Langford, Ben; Oram, David E.; Barley, Mark H.; Jenkin, Michael E.; Rickard, Andrew R.; Coe, Hugh; McFiggans, Gordon

    2010-05-01

    The tropics emit a huge amount of volatile organic compounds (VOCs) into the Earth's atmosphere. The processes by which these gases are oxidised to form secondary organic aerosol (SOA) are currently not well understood or quantified. Intensive field measurements were carried out as part of the Oxidant and Particle Photochemical Processes (OP3) and the Aerosol Coupling in the Earth System (ACES) projects around pristine rainforest in Malaysian Borneo. This is the first campaign of its type in a South East Asian rainforest. We present detailed organic aerosol composition measurements made using an Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) at Bukit Atur, a Global Atmosphere Watch site located in the Danum Valley Conservation Area. This is a state-of-the-art field deployable instrument that can provide real time composition, mass loading and aerodynamic particle sizing information. In addition, the mass spectral resolution is sufficient to perform an analysis of the elemental composition of the organic species present. Off line analysis of filter samples was performed using comprehensive two-dimensional gas chromatography coupled to time of flight mass spectrometry (GCxGC/ToFMS). This technique provides a more detailed chemical characterisation of the SOA, allowing direct links back to gas phase precursors. The ground site data are compared with Aerodyne Compact Time of Flight Aerosol Mass Spectrometer (C-ToF-AMS) measurements made on the UK Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 research aircraft. Airborne measurements were made above pristine rainforest surrounding the Danum Valley site, as well as nearby oil palm agricultural sites and palm oil rendering plants. Proton Transfer Reaction Mass Spectrometry (PTRMS) measurements of VOCs were made at the ground site and from the FAAM aircraft. Novel organic aerosol was measured by both AMSs, and identified as being isoprenoid in origin by GCxGC/ToFMS analysis

  1. Novel approaches to the sampling of atmospheric aerosols and determination of chemical composition

    Energy Technology Data Exchange (ETDEWEB)

    Parshintsev, E.

    2011-05-15

    The Earth's climate is a highly dynamic and complex system in which atmospheric aerosols have been increasingly recognized to play a key role. Aerosol particles affect the climate through a multitude of processes, directly by absorbing and reflecting radiation and indirectly by changing the properties of clouds. Because of the complexity, quantification of the effects of aerosols continues to be a highly uncertain science. Better understanding of the effects of aerosols requires more information on aerosol chemistry. Before the determination of aerosol chemical composition by the various available analytical techniques, aerosol particles must be reliably sampled and prepared. Indeed, sampling is one of the most challenging steps in aerosol studies, since all available sampling techniques harbor drawbacks. In this study, novel methodologies were developed for sampling and determination of the chemical composition of atmospheric aerosols. In the particle-into-liquid sampler (PILS), aerosol particles grow in saturated water vapor with further impaction and dissolution in liquid water. Once in water, the aerosol sample can then be transported and analyzed by various offline or on-line techniques. In this study, PILS was modified and the sampling procedure was optimized to obtain less altered aerosol samples with good time resolution. A combination of denuders with different coatings was tested to adsorb gas phase compounds before PILS. Mixtures of water with alcohols were introduced to increase the solubility of aerosols. Minimum sampling time required was determined by collecting samples off-line every hour and proceeding with liquid-liquid extraction (LLE) and analysis by gas chromatography-mass spectrometry (GCMS). The laboriousness of LLE followed by GC-MS analysis next prompted an evaluation of solidphase extraction (SPE) for the extraction of aldehydes and acids in aerosol samples. These two compound groups are thought to be key for aerosol growth

  2. Quantum Chemical Calculations Resolved Identification of Methylnitrocatechols in Atmospheric Aerosols.

    Science.gov (United States)

    Frka, Sanja; Šala, Martin; Kroflič, Ana; Huš, Matej; Čusak, Alen; Grgić, Irena

    2016-06-01

    Methylnitrocatechols (MNCs) are secondary organic aerosol (SOA) tracers and major contributors to atmospheric brown carbon; however, their formation and aging processes in atmospheric waters are unknown. To investigate the importance of aqueous-phase electrophilic substitution of 3-methylcatechol with nitronium ion (NO2(+)), we performed quantum calculations of their favorable pathways. The calculations predicted the formation of 3-methyl-5-nitrocatechol (3M5NC), 3-methyl-4-nitrocatechol (3M4NC), and a negligible amount of 3-methyl-6-nitrocatechol (3M6NC). MNCs in atmospheric PM2 samples were further inspected by LC/(-)ESI-MS/MS using commercial as well as de novo synthesized authentic standards. We detected 3M5NC and, for the first time, 3M4NC. In contrast to previous reports, 3M6NC was not observed. Agreement between calculated and observed 3M5NC/3M4NC ratios cannot unambiguously confirm the electrophilic mechanism as the exclusive formation pathway of MNCs in aerosol water. However, the examined nitration by NO2(+) is supported by (1) the absence of 3M6NC in the ambient aerosols analyzed and (2) the constant 3M5NC/3M4NC ratio in field aerosol samples, which indicates their common formation pathway. The magnitude of error one could make by incorrectly identifying 3M4NC as 3M6NC in ambient aerosols was also assessed, suggesting the importance of evaluating the literature regarding MNCs with special care. PMID:27136117

  3. Experimental Characterization of Radiation Forcing due to Atmospheric Aerosols

    Science.gov (United States)

    Sreenivas, K. R.; Singh, D. K.; Ponnulakshmi, V. K.; Subramanian, G.

    2011-11-01

    Micro-meteorological processes in the nocturnal atmospheric boundary layer (NBL) including the formation of radiation-fog and the development of inversion layers are controlled by heat transfer and the vertical temperature distribution close to the ground. In a recent study, it has been shown that the temperature profile close to the ground in stably-stratified, NBL is controlled by the radiative forcing due to suspended aerosols. Estimating aerosol forcing is also important in geo-engineering applications to evaluate the use of aerosols to mitigate greenhouse effects. Modeling capability in the above scenarios is limited by our knowledge of this forcing. Here, the design of an experimental setup is presented which can be used for evaluating the IR-radiation forcing on aerosols under either Rayleigh-Benard condition or under conditions corresponding to the NBL. We present results indicating the effect of surface emissivities of the top and bottom boundaries and the aerosol concentration on the temperature profiles. In order to understand the observed enhancement of the convection-threshold, we have determined the conduction-radiation time constant of an aerosol laden air layer. Our results help to explain observed temperature profiles in the NBL, the apparent stability of such profiles and indicate the need to account for the effect of aerosols in climatic/weather models.

  4. Analysis of Chemical Composition of Atmospheric Aerosols Above a South East Asian Rainforest

    Science.gov (United States)

    Robinson, N. H.; Allan, J. D.; Williams, P. I.; Hamilton, J. F.; Chen, Q.; Martin, S. T.; Coe, H.; McFiggans, G. B.

    2008-12-01

    The tropics emit a huge amount of volatile organic compounds (VOCs) into the Earth's atmosphere. The processes by which these gases are oxidised to form secondary organic aerosol (SOA) are not well understood or quantified. Insight into the origins and properties of these particles can be gained by analysis of their composition. Intensive field measurements were carried out as part of the Oxidant and Particle Photochemical Processes (OP3) and the Aerosol Coupling in the Earth System (ACES) projects in the rainforest in Malaysian Borneo. This is the first campaign of its type in a South East Asian rainforest. We present detailed organic aerosol composition measurements made using an Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) at Bukit Atur, a Global Atmosphere Watch site located in the Danum Valley Conservation Area. This is a state-of-the-art field deployable instrument that can provide real time composition, mass loading and aerodynamic particle sizing information. In addition, the mass spectral resolution is sufficient to perform an analysis of the elemental composition of the organic species present. Other tools such as positive matrix factorisation (PMF) have been used to help assess the relative source contributions to the organic aerosol. The aerosol's chemical origins have been further investigated by comparing these spectra to chamber experiments, mass spectral libraries and data from comparable locations in other locations. These data are also being analysed in conjunction with high complexity offline techniques applied to samples collected using filters and a Particle-Into-Liquid Sampler (PILS). Methods used include liquid chromatography and comprehensive two-dimensional gas chromatography coupled to time of flight mass spectrometry. These techniques provide a more detailed chemical characterisation of the SOA and water soluble organic carbon, allowing direct links back to gas phase precursors.

  5. Radical loss in the atmosphere from Cu-Fe redox coupling in aerosols

    Science.gov (United States)

    Mao, J.; Fan, S.; Jacob, D. J.; Travis, K. R.

    2013-01-01

    The hydroperoxyl radical (HO2) is a major precursor of OH and tropospheric ozone. OH is the main atmospheric oxidant, while tropospheric ozone is an important surface pollutant and greenhouse gas. Standard gas-phase models for atmospheric chemistry tend to overestimate observed HO2 concentrations, and this has been tentatively attributed to heterogeneous uptake by aerosol particles. It is generally assumed that HO2 uptake by aerosol involves conversion to H2O2, but this is of limited efficacy as an HO2 sink because H2O2 can photolyze to regenerate OH and from there HO2. Joint atmospheric observations of HO2 and H2O2 suggest that HO2 uptake by aerosols may in fact not produce H2O2. Here we propose a catalytic mechanism involving coupling of the transition metal ions Cu(I)/Cu(II) and Fe(II)/Fe(III) to rapidly convert HO2 to H2O in aqueous aerosols. The implied HO2 uptake and conversion to H2O significantly affects global model predictions of tropospheric OH, ozone, carbon monoxide (CO) and other species, improving comparisons to observations in the GEOS-Chem model. It represents a previously unrecognized positive radiative forcing of aerosols through the effects on the chemical budgets of major greenhouse gases including methane and hydrofluorocarbons (HFCs).

  6. Water uptake of clay and desert dust aerosol particles at sub- and supersaturated water vapor conditions.

    Science.gov (United States)

    Herich, Hanna; Tritscher, Torsten; Wiacek, Aldona; Gysel, Martin; Weingartner, Ernest; Lohmann, Ulrike; Baltensperger, Urs; Cziczo, Daniel J

    2009-09-28

    Airborne mineral dust particles serve as cloud condensation nuclei (CCN), thereby influencing the formation and properties of warm clouds. It is therefore of atmospheric interest how dust aerosols with different mineralogy behave when exposed to high relative humidity (RH) or supersaturation (SS) with respect to liquid water. In this study the subsaturated hygroscopic growth and the supersaturated cloud condensation nucleus activity of pure clays and real desert dust aerosols were determined using a hygroscopicity tandem differential mobility analyzer (HTDMA) and a cloud condensation nuclei counter (CCNC), respectively. Five different illite, montmorillonite and kaolinite clay samples as well as three desert dust samples (Saharan dust (SD), Chinese dust (CD) and Arizona test dust (ATD)) were investigated. Aerosols were generated both with a wet and a dry disperser. The water uptake was parameterized via the hygroscopicity parameter kappa. The hygroscopicity of dry generated dust aerosols was found to be negligible when compared to processed atmospheric aerosols, with CCNC derived kappa values between 0.00 and 0.02 (the latter corresponds to a particle consisting of 96.7% by volume insoluble material and approximately 3.3% ammonium sulfate). Pure clay aerosols were generally found to be less hygroscopic than natural desert dust particles. The illite and montmorillonite samples had kappa approximately 0.003. The kaolinite samples were less hygroscopic and had kappa=0.001. SD (kappa=0.023) was found to be the most hygroscopic dry-generated desert dust followed by CD (kappa=0.007) and ATD (kappa=0.003). Wet-generated dust showed an increased water uptake when compared to dry-generated samples. This is considered to be an artifact introduced by redistribution of soluble material between the particles. Thus, the generation method is critically important when presenting such data. These results indicate any atmospheric processing of a fresh mineral dust particle which

  7. Basic phenomena utilised in aerosol particle measurement techniques; Hiukkasmittaustekniikoiden perusilmioet

    Energy Technology Data Exchange (ETDEWEB)

    Janka, K. [Dekati Oy, Tampere (Finland)

    2006-10-15

    The project deals with development of basic phenomena and mechanism utilised in aerosol particle measurement techniques. The areas under development are: particle-charging techniques, photoelectric charging, particle concentrating using virtual-impactor technique, and optical characterising techniques of particles. Results will be applied on detection techniques of bioaerosol attract, particle emission sensors for diesel exhaust gases, and widening the application areas of existing measurement techniques. (orig.)

  8. Gravitational agglomeration of post-HCDA LMFBR aerosols: nonspherical particles

    International Nuclear Information System (INIS)

    Aerosol behavior analysis computer programs have shown that temporal aerosol size distributions in nuclear reactor containments are sensitive to shape factors. This research investigates shape factors by a detailed theoretical analysis of hydrodynamic interactions between a nonspherical particle and a spherical particle undergoing gravitational collisions in an LMFBR environment. First, basic definitions and expressions for settling speeds and collisional efficiencies of nonspherical particles are developed. These are then related to corresponding quantities for spherical particles through shape factors. Using volume equivalent diameter as the defining length in the gravitational collision kernel, the aerodynamic shape factor, the density correction factor, and the gravitational collision shape factor, are introduced to describe the collision kernel for collisions between aerosol agglomerates. The Navier-Stokes equation in oblate spheroidal coordinates is solved to model a nonspherical particle and then the dynamic equations for two particle motions are developed. A computer program (NGCEFF) is constructed, and the dynamical equations are solved by Gear's method

  9. Possible effect of extreme solar energetic particle events of September–October 1989 on polar stratospheric aerosols: a case study

    Directory of Open Access Journals (Sweden)

    I. A. Mironova

    2013-09-01

    Full Text Available The main ionization source of the middle and low Earth's atmosphere is related to energetic particles coming from outer space. Usually it is ionization from cosmic rays that is always present in the atmosphere. But in a case of a very strong solar eruption, some solar energetic particles (SEPs can reach middle/low atmosphere increasing the ionization rate up to some orders of magnitude at polar latitudes. We continue investigating such a special class of solar events and their possible applications for natural variations of the aerosol content. After the case study of the extreme SEP event of January 2005 and its possible effect upon polar stratospheric aerosols, here we analyze atmospheric applications of the sequence of several events that took place over autumn 1989. Using aerosol data obtained over polar regions from two satellites with space-borne optical instruments SAGE II and SAM II that were operating during September–October 1989, we found that an extreme major SEP event might have led to formation of new particles and/or growth of preexisting ultrafine particles in the polar stratospheric region. However, the effect of the additional ambient air ionization on the aerosol formation is minor, in comparison with temperature effect, and can take place only in the cold polar atmospheric conditions. The extra aerosol mass formed under the temperature effect allows attributing most of the changes to the "ion–aerosol clear sky mechanism".

  10. The density of humic acids and humic like substances (HULIS) from fresh and aged wood burning and pollution aerosol particles

    OpenAIRE

    Dinar, E.; Mentel, T. F.; Y. Rudich

    2006-01-01

    Atmospheric aerosols play significant roles in climatic related phenomena. Size, density and shape of particles affect their fluid-dynamic parameters which in turn dictate their transport and lifecycle. Moreover, density and shape are also related to particles' optical properties, influencing their regional and global radiative effects. In the present study we have measured and compared the effective densities of humic like substances (HULIS) extracted from smoke and pollution aerosol pa...

  11. Simulation of aerosol substance transfer in the atmospheric boundary layer

    Science.gov (United States)

    Lezhenin, A. A.; Raputa, V. F.; Shlychkov, V. Ð. ń.

    2014-11-01

    A model for the reconstruction of the surface concentration of a heavy non-homogeneous substance transfered in the atmosphere is proposed. The model is used to simulate the snow surface contamination by benzo(a)pyren in the vicinity of Power Station-3 in the city of Barnaul. The effects of wind rotation in the atmospheric boundary layer on the field of long-term aerosol substance are assessed.

  12. Scattering Properties of Atmospheric Aerosols over Lanzhou City and Applications Using an Integrating Nephelometer

    Institute of Scientific and Technical Information of China (English)

    张武; 胡波; 陈长和; 杜萍; 张镭; 冯广泓

    2004-01-01

    The data, measured by a three-wavelength Integrating Nephelometer over Lanzhou City during the winters of 2001/2002 and 2002/2003 respectively, have been analyzed for investigating the scattering properties of atmospheric aerosols and exploring their relationship and the status of air pollution. The aerosol particle volume distribution is inverted with the measured spectral scattering coefficients. The results show that the daily variation of the aerosol scattering coefficients is in a tri-peak shape. The average ratio of backscattering coefficient to total scattering coefficient at 550 nm is 0.158; there exists an excellent correlation between the scattering coefficients and the concentration of PM10. The average ratio of the concentration of PM10 to the scattering coefficients is 0.37 g m-2, which is contingent on the optical parameters of aerosol particles such as the size distribution, etc.; an algorithm is developed for inverting the volume distribution of aerosol particles by using the histogram and Monte-Carlo techniques, and the test results show that the inversion is reasonable.

  13. Development of aerosol transport and transformation models in PROFIT code. Coagulation of aerosol particles

    International Nuclear Information System (INIS)

    The problems of simulation of aerosol particles distribution in primary coolant circuit are discussed. The correlation dependences for collision centres and aerosol particles coagulation under the action of Brownian, turbulent, gradient and gravitational mechanisms with account of the accumulation effect are plotted. The dependences obtained take account of mutual influence of different coagulation mechanisms. The presented correlations for coagulation centre are implanted into PROFIT code

  14. Non-linear photochemical pathways in laser induced atmospheric aerosol formation

    CERN Document Server

    Mongin, Denis; Schubert, Elise; Brisset, Jean-Gabriel; Berti, Nicolas; Moret, Michel; Prévôt, André S H; Baltensperger, Urs; Kasparian, Jérôme; Wolf, Jean-Pierre

    2015-01-01

    We measured the chemical composition and the size distribution of aerosols generated by femtosecond-Terawatt laser pulses in the atmosphere using an aerosol mass spectrometer (AMS). We show that nitric acid condenses in the form of ammonium nitrate, and that oxidized volatile organics also contribute to particle growth. These two components account for two thirds and one third, respectively, of the dry laser-condensed mass. They appear in two different modes centred at 380 nm and 150 nm. The number concentration of particles between 25 and 300 nm increases by a factor of 15. Pre-existing water droplets strongly increase the oxidative properties of the laser-activated atmosphere, substantially enhancing the condensation of organics under laser illumination.

  15. Clustering of particles falling in a turbulent aerosol

    CERN Document Server

    Gustavsson, K; Mehlig, B

    2014-01-01

    Spatial clustering of identical particles falling through a turbulent aerosol enhances the collision rate between the falling particles, an important problem in aerosol science. We analyse this problem using perturbation theory in a dimensionless parameter, the so-called Kubo number. This allows us to derive an analytical theory quantifying the spatial clustering. We find that clustering of small particles in incompressible random velocity fields may be reduced or enhanced by the effect of gravity, depending on the Stokes number of the particles and the Froude number of the flow.

  16. a Study of the Origin of Atmospheric Organic Aerosols

    Science.gov (United States)

    Hildemann, Lynn Mary

    1990-01-01

    The sources of ambient organic particulate matter in urban areas are investigated through a program of emission source measurements, atmospheric measurements, and mathematical modeling of source/receptor relationships. A dilution sampler intended to collect fine organic aerosol from combustion sources is designed to simulate atmospheric cooling and dilution processes, so that organic vapors which condense under ambient conditions will be collected as particulate matter. This system is used to measure the emissions from a boiler burning distillate oil, a home fireplace, catalyst and noncatalyst automobiles, heavy-duty diesel trucks, natural gas home appliances, and meat cooking operations. Alternate techniques are used to sample the particulate matter emitted from cigarette smoking, a roofing tar pot, paved road dust, brake lining wear, tire wear, and vegetative detritus. The bulk chemical characteristics of the fine aerosol fraction are presented for each source. Over half of the fine aerosol mass emitted from automobiles, wood burning, meat cooking, home appliances, cigarettes, and tar pots is shown to consist of organic compounds. The organic material collected from these sources is analyzed using high-resolution gas chromatography. Using a simple analytical protocol, a quantitative, 50-parameter characterization of the elutable fine organic aerosol emitted from each source type is obtained, which proves to be a unique fingerprint that can be used to distinguish most sources from each other. A mathematical model is used to predict the characteristics of fine ambient organic aerosol in the Los Angeles area that would prevail if the primary organic emissions are transported without chemical reaction. The model is found to track the seasonal variations observed in the ambient aerosol at the three sites studied. Emissions from vehicles and fireplaces are identified as significant sources of solvent-extractable organic aerosol. Differences between the model

  17. Measurements of optical properties of atmospheric aerosols in Northern Finland

    Directory of Open Access Journals (Sweden)

    V. Aaltonen

    2005-11-01

    Full Text Available Three years of continuous measurements of aerosol optical properties and simultaneous aerosol number size distribution measurements at Pallas GAW station, a remote subarctic site in the northern border of the boreal forest zone, have been analysed. The scattering coefficient at 550 nm varied from 0.2 to 94.4 Mm−1 with an average of 7.1±8.6 Mm−1. Both the scattering and backscattering coefficients had a clear seasonal cycle with an autumn minimum and a 4–5 times higher summer maximum. The scattering was dominated by submicron aerosols and especially so during late summer and autumn. The Ångström exponent had a clear seasonal pattern with maximum values in late summer and minimum values during wintertime. The highest hemispheric backscattering fraction values were observed in autumn, indicating clean air with few scattering particles and a particle size distribution strongly dominated by ultrafine particles. To analyse the influence of air mass origin on the aerosol optical properties a trajectory climatology was applied to the Pallas aerosol data. The most polluted trajectory patterns represented air masses from the Kola Peninsula, Scandinavia and Russia as well as long-range transport from Britain and Eastern Europe. These air masses had the largest average scattering and backscattering coefficients for all seasons. Higher than average values of the Ångström exponent were also observed in connection with transport from these areas.

  18. Studies of aerosol particle formation from various sources using ion and electron beam analytical techniques.

    OpenAIRE

    Gharibi, Arash

    2006-01-01

    The thesis presents the results of studies of aerosol particle formation using ion and electron beam analytical techniques. The sources of aerosol particle formation studied are the following: 1. production of primary aerosol particles in the high Arctic region during summers 2. emission of ultrafine aerosol particles from wear on the road-tire interface 3. emission of aerosol particles from district heating units operating on three commonly-used biofuels. A source...

  19. Oxidation Products of Biogenic Emissions Contribute to Nucleation of Atmospheric Particles

    CERN Document Server

    Riccobono, Francesco; Baltensperger, Urs; Worsnop, Douglas R; Curtius, Joachim; Carslaw, Kenneth S; Wimmer, Daniela; Wex, Heike; Weingartner, Ernest; Wagner, Paul E; Vrtala, Aron; Viisanen, Yrjö; Vaattovaara, Petri; Tsagkogeorgas, Georgios; Tomé, Antonio; Stratmann, Frank; Stozhkov, Yuri; Spracklen, Dominick V; Sipilä, Mikko; Praplan, Arnaud P; Petäjä, Tuukka; Onnela, Antti; Nieminen, Tuomo; Mathot, Serge; Makhmutov, Vladimir; Lehtipalo, Katrianne; Laaksonen, Ari; Kvashin, Alexander N.; Kürten, Andreas; Kupc, Agnieszka; Keskinen, Helmi; Kajos, Maija; Junninen, Heikki; Hansel, Armin; Franchin, Alessandro; Flagan, Richard C; Ehrhart, Sebastian; Duplissy, Jonathan; Dunne, Eimear M; Downard, Andrew; David, André; Breitenlechner, Martin; Bianchi, Federico; Amorim, Antonio; Almeida, João; Rondo, Linda; Ortega, Ismael K; Dommen, Josef; Scott, Catherine E; Vrtala, Aron; Santos, Filipe D; Schallhart, Simon; Seinfeld, John H; Sipila, Mikko; Donahue, Neil M; Kirkby, Jasper; Kulmala, Markku

    2014-01-01

    Atmospheric new-particle formation affects climate and is one of the least understood atmospheric aerosol processes. The complexity and variability of the atmosphere has hindered elucidation of the fundamental mechanism of new-particle formation from gaseous precursors. We show, in experiments performed with the CLOUD (Cosmics Leaving Outdoor Droplets) chamber at CERN, that sulfuric acid and oxidized organic vapors at atmospheric concentrations reproduce particle nucleation rates observed in the lower atmosphere. The experiments reveal a nucleation mechanism involving the formation of clusters containing sulfuric acid and oxidized organic molecules from the very first step. Inclusion of this mechanism in a global aerosol model yields a photochemically and biologically driven seasonal cycle of particle concentrations in the continental boundary layer, in good agreement with observations.

  20. Chemical composition of atmospheric aerosols between Moscow and Vladivostok

    Directory of Open Access Journals (Sweden)

    S. Kuokka

    2007-05-01

    Full Text Available The TROICA-9 expedition (Trans-Siberian Observations Into the Chemistry of the Atmosphere was carried out at the Trans-Siberian railway between Moscow and Vladivostok in October 2005. Measurements of aerosol physical and chemical properties were made from an observatory carriage connected to a passenger train. Black carbon (BC concentrations in fine particles (PM2.5, aerodynamic diameter <2.5 μm were measured with an aethalometer using a five-minute time resolution. Concentrations of inorganic ions and some organic compounds (Cl, NO3, SO42−, Na+, NH4+, K+, Ca2+, Mg2+, oxalate and methane sulphonate were measured continuously by using an on-line system with a 15-min time resolution. In addition, particle volume size distributions were determined for particles in the diameter range 3–850 nm using a 10-min. time resolution. The continuous measurements were completed with 24-h. PM2.5 filter samples which were stored in a refrigerator and later analyzed in chemical laboratory. The analyses included mass concentrations of PM2.5, ions, monosaccharide anhydrides (levoglucosan, galactosan and mannosan and trace elements (Al, As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb, V and Zn. The mass concentrations of PM2.5 varied in the range of 4.3–34.8 μg m−3 with an average of 21.6 μg m−3. Fine particle mass consisted mainly of BC (average 27.6%, SO42− (13.0%, NH4+ (4.1%, and NO3 (1.4%. One of the major constituents was obviously also organic carbon which was not determined. The contribution of BC was high compared with other studies made in Europe and Asia. High concentrations of ions, BC and particle volume were observed between Moscow and roughly 4000 km east of it, as well as close to

  1. Radical loss in the atmosphere from Cu-Fe redox coupling in aerosols

    Directory of Open Access Journals (Sweden)

    J. Mao

    2012-10-01

    Full Text Available The hydroperoxyl radical (HO2 is a major precursor of OH and tropospheric ozone. OH is the main atmospheric oxidant, while tropospheric ozone is an important surface pollutant and greenhouse gas. Standard gas-phase models for atmospheric chemistry tend to overestimate observed HO2 concentrations, and this has been tentatively attributed to heterogeneous uptake by aerosol particles. It is generally assumed that HO2 uptake by aerosol involve conversion to H2O2, but this is of limited efficacy as an HO2 sink because H2O2 can photolyze to regenerate OH and from there HO2. Joint atmospheric observations of HO2 and H2O2 suggest that HO2 uptake by aerosols may in fact not produce H2O2. Here we propose a catalytic mechanism involving coupling of the transition metal ions (TMI Cu(I/Cu(II and Fe(II/Fe(III to rapidly convert HO2 to H2O in aerosols. The implied HO2 uptake significantly affects global model predictions of tropospheric OH, ozone, and other species, improving comparisons to observations, and may have a major and previously unrecognized impact on atmospheric oxidant chemistry.

  2. Aerosol number size distributions over a coastal semi urban location: Seasonal changes and ultrafine particle bursts.

    Science.gov (United States)

    Babu, S Suresh; Kompalli, Sobhan Kumar; Moorthy, K Krishna

    2016-09-01

    Number-size distribution is one of the important microphysical properties of atmospheric aerosols that influence aerosol life cycle, aerosol-radiation interaction as well as aerosol-cloud interactions. Making use of one-yearlong measurements of aerosol particle number-size distributions (PNSD) over a broad size spectrum (~15-15,000nm) from a tropical coastal semi-urban location-Trivandrum (Thiruvananthapuram), the size characteristics, their seasonality and response to mesoscale and synoptic scale meteorology are examined. While the accumulation mode contributed mostly to the annual mean concentration, ultrafine particles (having diameter <100nm) contributed as much as 45% to the total concentration, and thus constitute a strong reservoir, that would add to the larger particles through size transformation. The size distributions were, in general, bimodal with well-defined modes in the accumulation and coarse regimes, with mode diameters lying in the range 141 to 167nm and 1150 to 1760nm respectively, in different seasons. Despite the contribution of the coarse sized particles to the total number concentration being meager, they contributed significantly to the surface area and volume, especially during transport of marine air mass highlighting the role of synoptic air mass changes. Significant diurnal variation occurred in the number concentrations, geometric mean diameters, which is mostly attributed to the dynamics of the local coastal atmospheric boundary layer and the effect of mesoscale land/sea breeze circulation. Bursts of ultrafine particles (UFP) occurred quite frequently, apparently during periods of land-sea breeze transitions, caused by the strong mixing of precursor-rich urban air mass with the cleaner marine air mass; the resulting turbulence along with boundary layer dynamics aiding the nucleation. These ex-situ particles were observed at the surface due to the transport associated with boundary layer dynamics. The particle growth rates from

  3. Response of an aerosol mass spectrometer to organonitrates and organosulfates and implications for atmospheric chemistry

    OpenAIRE

    Farmer, D. K.; Matsunaga, A; K. S. Docherty; Surratt, J D; J. H. Seinfeld; P. J. Ziemann; Jimenez, J. L

    2010-01-01

    Organonitrates (ON) are important products of gas-phase oxidation of volatile organic compounds in the troposphere; some models predict, and laboratory studies show, the formation of large, multifunctional ON with vapor pressures low enough to partition to the particle phase. Organosulfates (OS) have also been recently detected in secondary organic aerosol. Despite their potential importance, ON and OS remain a nearly unexplored aspect of atmospheric chemistry because few studies have quantif...

  4. Aerosol particle properties in a South American megacity

    Science.gov (United States)

    Ulke, Ana; Torres-Brizuela, Marcela; Raga, Graciela; Baumgardner, Darrel; Cancelada, Marcela

    2015-04-01

    state of the atmosphere. During the campaign, the eruption of the Puyehue-Cordon Caulle complex in Southern Chile took place and the plume passed several times over the measurement site. Backward trajectories and the analysis of the prevailing synoptic environment was used in order to relate the measurements with the air mass history and to detect the regional contributions to the aerosol load in the city. Strong correlations between the CN, PPAH and black carbon suggest that the majority of particles come from combustion (vehicular traffic and the nearby power plant). The higher values were observed during the cold season, with maximum CN number concentration reaching 55000 cm-3, and the most frequent concentrations varying from 800 cm-3 to 11000 cm-3. The highest recorded concentrations of PPAH and BC were 500 ng m-3 and 400 ng m-3, respectively.

  5. Surface tensions, viscosities, and diffusion constants in mixed component single aerosol particles

    Science.gov (United States)

    Bzdek, Bryan; Marshall, Frances; Song, Young-Chul; Haddrell, Allen; Reid, Jonathan

    2016-04-01

    Surface tension and viscosity are important aerosol properties but are challenging to measure on individual particles owing to their small size and mass. Aerosol viscosity impacts semivolatile partitioning from the aerosol phase, molecular diffusion in the bulk of the particle, and reaction kinetics. Aerosol surface tension impacts how particles activate to serve as cloud condensation nuclei. Knowledge of these properties and how they change under different conditions hinders accurate modelling of aerosol physical state and atmospheric impacts. We present measurements made using holographic optical tweezers to directly determine the viscosity and surface tension of optically trapped droplets containing ~1-4 picolitres of material (corresponding to radii of ~5-10 micrometres). Two droplets are captured in the experimental setup, equilibrated to a relative humidity, and coalesced through manipulation of the relative trap positions. The moment of coalescence is captured using camera imaging as well as from elastically backscattered light connected to an oscilloscope. For lower viscosity droplets, the relaxation in droplet shape to a sphere follows the form of a damped oscillator and gives the surface tension and viscosity. For high viscosity droplets, the relaxation results in a slow merging of the two droplets to form a sphere and the timescale of that process permits determination of viscosity. We show that droplet viscosity and surface tension can be quantitatively determined to within diffusion constants, vapour pressures, and reactive uptake coefficients for a mixed component aerosol undergoing oxidation and volatilisation will be discussed.

  6. Chemical Composition of Atmospheric Aerosols Above a Pristine South East Asian Rainforest

    Science.gov (United States)

    Robinson, N. H.; Allan, J. D.; Williams, P. I.; Coe, H.; Hamilton, J.; Chen, Q.; Martin, S.; Trembath, J.

    2009-04-01

    The tropics emit a huge amount of volatile organic compounds (VOCs) into the Earth's atmosphere. The processes by which these gases are oxidised to form secondary organic aerosol (SOA) are currently not well understood or quantified. Intensive field measurements were carried out as part of the Oxidant and Particle Photochemical Processes (OP3) and the Aerosol Coupling in the Earth System (ACES) projects around pristine rainforest in Malaysian Borneo. This is the first campaign of its type in a South East Asian rainforest. We present detailed organic aerosol composition measurements made using an Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) at Bukit Atur, a Global Atmosphere Watch site located in the Danum Valley Conservation Area. This is a state-of-the-art field deployable instrument that can provide real time composition, mass loading and aerodynamic particle sizing information. In addition, the mass spectral resolution is sufficient to perform an analysis of the elemental composition of the organic species present. Other tools such as positive matrix factorisation (PMF) have been used to help assess the relative source contributions to the organic aerosol. A suite of supporting aerosol and gas phase measurements were made, including size resolved number concentration measurements with Differential Mobility Particle Sizer (DMPS), as well as absorption measurements made with a Multi-Angle Absorption Photometer (MAAP). The ground site data are compared with Aerodyne Compact Time of Flight Aerosol Mass Spectrometer (C-ToF-AMS) measurements made on the UK Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 research aircraft. Airborne measurements were made above pristine rainforest surrounding the Danum Valley site, as well as nearby oil palm agricultural sites and palm oil rendering plants. Airborne hygroscopicity was measured using a Droplet Measurement Technology Cloud Condensation Nuclei counter (DMT CCN counter) in

  7. Aerosolization, Chemical Characterization, Hygroscopicity and Ice Formation of Marine Biogenic Particles

    Science.gov (United States)

    Alpert, P. A.; Radway, J.; Kilthau, W.; Bothe, D.; Knopf, D. A.; Aller, J. Y.

    2013-12-01

    The oceans cover the majority of the earth's surface, host nearly half the total global primary productivity and are a major source of atmospheric aerosol particles. However, effects of biological activity on sea spray generation and composition, and subsequent cloud formation are not well understood. Our goal is to elucidate these effects which will be particularly important over nutrient rich seas, where microorganisms can reach concentrations of 10^9 per mL and along with transparent exopolymer particles (TEP) can become aerosolized. Here we report the results of mesocosm experiments in which bubbles were generated by two methods, either recirculating impinging water jets or glass frits, in natural or artificial seawater containing bacteria and unialgal cultures of three representative phytoplankton species, Thalassiosira pseudonana, Emiliania huxleyi, and Nannochloris atomus. Over time we followed the size distribution of aerosolized particles as well as their hygroscopicity, heterogeneous ice nucleation potential, and individual physical-chemical characteristics. Numbers of cells and the mass of dissolved and particulate organic carbon (DOC, POC), TEP (which includes polysaccharide-containing microgels and nanogels >0.4 μm in diameter) were determined in the bulk water, the surface microlayer, and aerosolized material. Aerosolized particles were also impacted onto substrates for ice nucleation and water uptake experiments, elemental analysis using computer controlled scanning electron microscopy and energy dispersive analysis of X-rays (CCSEM/EDX), and determination of carbon bonding with scanning transmission X-ray microscopy and near-edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). Regardless of bubble generation method, the overall concentration of aerosol particles, TEP, POC and DOC increased as concentrations of bacterial and phytoplankton cells increased, stabilized, and subsequently declined. Particles cloud formation and potential

  8. Relationship Between Aerosol Number Size Distribution and Atmospheric Electric Potential Gradient in an Urban Area

    Science.gov (United States)

    Wright, Matthew; Matthews, James; Bacak, Asan; Silva, Hugo; Priestley, Michael; Percival, Carl; Shallcross, Dudley

    2016-04-01

    Small ions are created in the atmosphere by ground based radioactive decay and solar and cosmic radiation ionising the air. The ionosphere is maintained at a high potential relative to the Earth due to global thunderstorm activity, a current from the ionosphere transfers charge back to the ground through the weakly ionised atmosphere. A potential gradient (PG) exists between the ionosphere and the ground that can be measured in fair weather using devices such as an electric field mill. PG is inversely-proportional to the conductivity of the air and therefore to the number of ions of a given electrical mobility; a reduction of air ions will cause an increase of PG. Aerosols in the atmosphere act as a sink of air ions with an attachment rate dependent on aerosol size distribution and ion mobility. These relationships have been used to infer high particulate, and hence pollution, levels in historic datasets of atmospheric PG. A measurement campaign was undertaken in Manchester, UK for three weeks in July and August where atmospheric PG was measured with an electric field mill (JCI131, JCI Chilworth) on a second floor balcony, aerosol size distribution measured with a scanning mobility particle sizer (SMPS, TSI3936), aerosol concentration measured with a condensation particle counter (CPC, Grimm 5.403) and local meteorological measurements taken on a rooftop measurement site ~200 m away. Field mill and CPC data were taken at 1 s intervals and SMPS data in 2.5 minute cycles. Data were excluded for one hour either side of rainfall as rainclouds and droplets can carry significant charge which would affect PG. A quantity relating to the attachment of ions to aerosol (Ion Sink) was derived from the effective attachment coefficient of the aerosols. Further measurements with the field mill and CPC were taken at the same location in November 2015 when bonfire events would be expected to increase aerosol concentrations. During the summer measurements, particle number count (PNC

  9. Sources and source processes of organic nitrogen aerosols in the atmosphere

    Science.gov (United States)

    Erupe, Mark E.

    The research in this dissertation explored the sources and chemistry of organic nitrogen aerosols in the atmosphere. Two approaches were employed: field measurements and laboratory experiments. In order to characterize atmospheric aerosol, two ambient studies were conducted in Cache Valley in Northern Utah during strong winter inversions of 2004 and 2005. The economy of this region is heavily dependent on agriculture. There is also a fast growing urban population. Urban and agricultural emissions, aided by the valley geography and meteorology, led to high concentrations of fine particles that often exceeded the national ambient air quality standards. Aerosol composition was dominated by ammonium nitrate and organic species. Mass spectra from an aerosol mass spectrometer revealed that the organic ion peaks were consistent with reduced organic nitrogen compounds, typically associated with animal husbandry practices. Although no direct source characterization studies have been undertaken in Cache Valley with an aerosol mass spectrometer, spectra from a study at a swine facility in Ames, Iowa, did not show any evidence of reduced organic nitrogen species. This, combined with temporal and diurnal characteristics of organic aerosol peaks, was a pointer that the organic nitrogen species in Cache Valley likely formed from secondary chemistry. Application of multivariate statistical analyses to the organic aerosol spectra further supported this hypothesis. To quantify organic nitrogen signals observed in ambient studies as well as understand formation chemistry, three categories of laboratory experiments were performed. These were calibration experiments, smog chamber studies, and an analytical method development. Laboratory calibration experiments using standard calibrants indicated that quantifying the signals from organic nitrogen species was dependent on whether they formed through acid-base chemistry or via secondary organic aerosol pathway. Results from smog chamber

  10. Structural aspects of the atmospheric aerosol of the Amazon basin

    International Nuclear Information System (INIS)

    The results presented on this paper may be considered as complementary to the ones published on two previous papers about the natural atmospheric aerosol of the Amazon Basin, and the effects, on these physical-chemical systems of the large scale brushfires carried out from time to time on that region. The experiments have been performed in August-September, 1980, simultaneously to the ones of the 'Projeto Queimadas - 1980' promoted by the National Center for Atmospheric Research from the U.S.A.. The new results here in presented are size distribution concentration data as log-probability curves for the detected tracer-elements; from these curves, by introducing a new technique, is was possible to derive the corresponding log-normal curves. These last curves can be used conveniently to characterize the atmospheric aerosol system which is under investigation. (Author)

  11. Polarization resolved angular optical scattering of aerosol particles

    Science.gov (United States)

    Redding, B.; Pan, Y.; Wang, C.; Videen, G.; Cao, Hui

    2014-05-01

    Real-time detection and identification of bio-aerosol particles are crucial for the protection against chemical and biological agents. The strong elastic light scattering properties of airborne particles provides a natural means for rapid, non-invasive aerosol characterization. Recent theoretical predictions suggested that variations in the polarization dependent angular scattering cross section could provide an efficient means of classifying different airborne particles. In particular, the polarization dependent scattering cross section of aggregate particles is expected to depend on the shape of the primary particles. In order to experimentally validate this prediction, we built a high throughput, sampling system, capable of measuring the polarization resolved angular scattering cross section of individual aerosol particles flowing through an interrogating volume with a single shot of laser pulse. We calibrated the system by comparing the polarization dependent scattering cross section of individual polystyrene spheres with that predicted by Mie theory. We then used the system to study different particles types: Polystyrene aggregates composed 500 nm spheres and Bacillus subtilis (BG, Anthrax simulant) spores composed of elongated 500 nm × 1000 nm cylinder-line particles. We found that the polarization resolved scattering cross section depends on the shape of the constituent elements of the aggregates. This work indicates that the polarization resolved scattering cross section could be used for rapid discrimination between different bio-aerosol particles.

  12. New aerosol particles formation in the Sao Paulo Metropolitan Area

    Science.gov (United States)

    Vela, Angel; Andrade, Maria de Fatima; Ynoue, Rita

    2016-04-01

    The Sao Paulo Metropolitan Area (SPMA), in the southeast region of Brazil, is considered a megalopolis comprised of Sao Paulo city and more 38 municipalities. The air pollutant emissions in the SPMA are related to the burning of the fuels: etanol, gasohol (gasoline with 25% ethanol) and diesel. According to CETESB (2013), the road vehicles contributed up to about 97, 87, and 80% of CO, VOCs and NOx emissions in 2012, respectively, being most of NOx associated to diesel combustion and most of CO and VOCs from gasohol and ethanol combustion. Studies conducted on ambient air pollution in the SPMA have shown that black carbon (BC) explains 21% of mass concentration of PM2.5 compared with 40% of organic carbon (OC), 20% of sulfates, and 12% of soil dust (Andrade et al., 2012). Most of the observed ambient PM2.5 mass concentration usually originates from precursors gases such as sulphur dioxide (SO2), ammonia (NH3), nitrogen oxides (NOx) and VOCs as well as through the physico-chemical processes such as the oxidation of low volatile hydrocarbons transferring to the condensed phase (McMurry et al., 2004). The Weather Research and Forecasting with Chemistry model (WRF-Chem; Grell et al. 2005), configured with three nested grid cells: 75, 15, and 3 km, is used as photochemical modeling to describe the physico-chemical processes leading to evolution of particles number and mass size distribution from a vehicular emission model developed by the IAG-USP laboratory of Atmospheric Processes and based on statistical information of vehicular activity. The spatial and temporal distributions of emissions in the finest grid cell are based on road density products compiled by the OpenStreetMap project and measurements performed inside tunnels in the SPMA, respectively. WRF-Chem simulation with coupled primary aerosol (dust and sea-salt) and biogenic emission modules and aerosol radiative effects turned on is conducted as the baseline simulation (Case_0) to evaluate the model

  13. Properties and Sources of Suburban Background Atmospheric Aerosol in Prague

    Czech Academy of Sciences Publication Activity Database

    Schwarz, Jaroslav; Havránek, Vladimír; Maenhaut, W.; Chi, X.; Ždímal, Vladimír; Hovorka, J.; Smolík, Jiří

    Prague : Orgit, 2009 - (Smolík, J.; O'Dowd, C.), s. 188-191 ISBN 978-80-02-12161-2. [International Conference Nucleation and Atmospheric Aerosols /18./. Prague (CZ), 10.08.2009-14.08.2009] R&D Projects: GA MŽP SP/1A3/148/08 Institutional research plan: CEZ:AV0Z40720504; CEZ:AV0Z10480505 Keywords : urban aerosol * size distribution * chemical composition Subject RIV: CF - Physical ; Theoretical Chemistry http://www.icnaa.cz/

  14. Retrieval of particle size distribution from aerosol optical thickness using an improved particle swarm optimization algorithm

    Science.gov (United States)

    Mao, Jiandong; Li, Jinxuan

    2015-10-01

    Particle size distribution is essential for describing direct and indirect radiation of aerosols. Because the relationship between the aerosol size distribution and optical thickness (AOT) is an ill-posed Fredholm integral equation of the first type, the traditional techniques for determining such size distributions, such as the Phillips-Twomey regularization method, are often ambiguous. Here, we use an approach based on an improved particle swarm optimization algorithm (IPSO) to retrieve aerosol size distribution. Using AOT data measured by a CE318 sun photometer in Yinchuan, we compared the aerosol size distributions retrieved using a simple genetic algorithm, a basic particle swarm optimization algorithm and the IPSO. Aerosol size distributions for different weather conditions were analyzed, including sunny, dusty and hazy conditions. Our results show that the IPSO-based inversion method retrieved aerosol size distributions under all weather conditions, showing great potential for similar size distribution inversions.

  15. Atmospheric pressure flow reactor / aerosol mass spectrometer studies of tropospheric aerosol nucleat and growth kinetics. Final report, June, 2001

    Energy Technology Data Exchange (ETDEWEB)

    Worsnop, Douglas R.

    2001-06-01

    The objective of this program was to determine the mechanisms and rates of growth and transformation and growth processes that control secondary aerosol particles in both the clear and polluted troposphere. The experimental plan coupled an aerosol mass spectrometer (AMS) with a chemical ionization mass spectrometer to provide simultaneous measurement of condensed and particle phases. The first task investigated the kinetics of tropospheric particle growth and transformation by measuring vapor accretion to particles (uptake coefficients, including mass accommodation coefficients and heterogeneous reaction rate coefficients). Other work initiated investigation of aerosol nucleation processes by monitoring the appearance of submicron particles with the AMS as a function of precursor gas concentrations. Three projects were investigated during the program: (1) Ozonolysis of oleic acid aerosols as model of chemical reactivity of secondary organic aerosol; (2) Activation of soot particles by measurement deliquescence in the presence of sulfuric acid and water vapor; (3) Controlled nucleation and growth of sulfuric acid aerosols.

  16. Experimental and theoretical investigation of nucleation and growth of atmospheric aerosols

    Science.gov (United States)

    Zhao, Jun

    Aerosol particles have profound impacts on human health, atmospheric radiation, and cloud microphysics and these impacts are strongly dependent on particle sizes. However, formation and growth of atmospheric particles are currently not well understood. In this work, laboratory and theoretical studies have been performed to investigate the formation and growth of atmospheric particles. The first two parts of the dissertation are a laboratory investigation of new particle formation and growth, and a theoretical study of atmospheric molecular complexes and clusters. The nucleation rate was considerably enhanced in the presence of cis-pinonic acid and ammonia. The composition of the critical cluster was estimated from the dependence of the nucleation rate on the precursor concentration and the time evolution of the clusters was then simulated using molecular dynamic simulations. Results from quantum chemical calculations and quantum theory of atoms in molecules (QTAIM) reveal that formation of strong hydrogen bonding between an organic acid and sulfuric acid is likely responsible for a reduction of the nucleation barrier by modifying the hydrophobic properties of the organic acid and allowing further addition of hydrophilic species (e.g., H2SO4, H2O, and possibly NH 3) to the hydrophilic side of the clusters. This promotes growth of the nascent cluster to overcome the nucleation barrier and thus enhances the nucleation in the atmosphere. The last part of this dissertation is the laboratory investigation of heterogeneous interactions of atmospheric carbonyls with sulfuric acid. Direct measurement has been performed to investigate the heterogeneous uptake of atmospheric carbonyls on sulfuric acid. Important parameters have been obtained from the time-dependent or time-independent uptake profiles. The results indicated that the acid-catalyzed reactions of larger aldehydes (e.g. octanal and 2, 4-hexadienal) in sulfuric acid solution were attributed to aldol condensation in

  17. New apparatus of single particle trap system for aerosol visualization

    Science.gov (United States)

    Higashi, Hidenori; Fujioka, Tomomi; Endo, Tetsuo; Kitayama, Chiho; Seto, Takafumi; Otani, Yoshio

    2014-08-01

    Control of transport and deposition of charged aerosol particles is important in various manufacturing processes. Aerosol visualization is an effective method to directly observe light scattering signal from laser-irradiated single aerosol particle trapped in a visualization cell. New single particle trap system triggered by light scattering pulse signal was developed in this study. The performance of the device was evaluated experimentally. Experimental setup consisted of an aerosol generator, a differential mobility analyzer (DMA), an optical particle counter (OPC) and the single particle trap system. Polystylene latex standard (PSL) particles (0.5, 1.0 and 2.0 μm) were generated and classified according to the charge by the DMA. Singly charged 0.5 and 1.0 μm particles and doubly charged 2.0 μm particles were used as test particles. The single particle trap system was composed of a light scattering signal detector and a visualization cell. When the particle passed through the detector, trigger signal with a given delay time sent to the solenoid valves upstream and downstream of the visualization cell for trapping the particle in the visualization cell. The motion of particle in the visualization cell was monitored by CCD camera and the gravitational settling velocity and the electrostatic migration velocity were measured from the video image. The aerodynamic diameter obtained from the settling velocity was in good agreement with Stokes diameter calculated from the electrostatic migration velocity for individual particles. It was also found that the aerodynamic diameter obtained from the settling velocity was a one-to-one function of the scattered light intensity of individual particles. The applicability of this system will be discussed.

  18. Aerosol vertical distribution, new particle formation, and jet aircraft particle emissions in the free troposhere and tropopause region; Vertikalverteilung und Neubildungsprozesse des Aerosols und partikelfoermige Flugzeugemissionen in der freien Troposphaere und Tropopausenregion

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, F.P.

    2000-07-01

    A contribution to the understanding of natural and anthropogenously induced particle formation as well as aerosol physical transformation processes within the free troposphere (FT) is introduced. Documentation and interpretation of empirical data relevant with respect to possible climatologic impact of anthropogenous aerosol emissions into the atmosphere is presented. The first section describes new technique for high spatial resolution measurements of ultrafine aerosol particles by condensation nucleus counters (CNCs), a necessary prerequisite for the observation of natural particle formation and jet aircraft emissions. The second section illustrates vertical distribution and variability ranges of the aerosol in the FT and the tropopause region (TP). Typical microphysical states of the atmospheric aerosol within the Northern Hemisphere are documented by means of systematic measurements during more than 60 flight missions. Simple mathematical parameterizations of the aerosol vertical distribution and aerosol size distributions are developed. Important aerosol sources within the FT are localized and possible aerosol formation processes are discussed. The third section is focussed on jet-engine particle emissions within the FT and TP. A unique inflight experiment for detection of extremely high concentrations (>10{sup 6} cm{sup -3}) of extremely small (donw to <3 nm) aerosols inside the exhaust plumes of several jet aircraft is described. Particle emission indices and emission-controlling parameters are deduced. Most important topic is the impact of fuel sulfur content of kerosine on number, size and chemical composition of jet particle emissions. Generalized results are parameterized in form of lognormal aerosol particle size distributions. (orig.) [German] Ein Beitrag zum Verstaendnis natuerlicher und anthropogen induzierter Aerosolneubildung sowie physikalischer Aerosolumwandlung in der freien Troposphaere wird vorgestellt. Empirisch gewonnenes Datenmaterial wird

  19. Is Distant Pollution Contaminating Local Air? Analyzing the Origins of Atmospheric Aerosols

    Directory of Open Access Journals (Sweden)

    David Geng

    2012-01-01

    Full Text Available Understanding the origin of aerosols in the atmosphere is important because of visual pollution, climate impacts, and deleterious health effects due to the inhalation of fine particles. This research analyzed aerosols characterized by their chloride, sulfate, and nitrate content as a function of size over a 3-month period. Due to wind patterns over coal-burning power plants, a higher concentration of local sulfate pollution was expected. Aerosols were harvested on the Purdue University campus using a high-volume air sampler with glass fiber filters and a five-stage impactor that separates the aerosols into five sizes. The filters were extracted in water to dissolve anions and the solution was analyzed using high-pressure liquid ion chromatography. Only trace amounts of chloride with no distinct patterns in size were detected. In total, nitrate content ranged from 0.12 to 2.10 μg/m3 and sulfate content ranged from 0.44 to 6.45 μg/m3 over a 3-month period. As for fine particles, a higher concentration of sulfate was observed. The Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT model determines air mass origin, and in this study, higher total sulfate content was observed when the air mass moved out of the southwest, and higher total nitrate content was observed when the air mass originated from the southeast. The author concluded that small particles resulted in sulfate from sulfur dioxide, typically from gas to particle conversion. High sulfur dioxide levels are directly correlated with coal-burning power plant density. Small particulate sulfate found in West Lafayette, Indiana, was determined to originate primarily from power plants in southwest Indiana. Though the results do show a significant amount of potentially harmful aerosols in West Lafayette, there is still further research to be done concerning isotopic composition of those particles in attempts to better explain the chemical pathways.

  20. On the dynamics of fine aerosols artificially produced. Application to the atmosphere

    International Nuclear Information System (INIS)

    We take advantage of the developments of a new method of measurement, using a diffusion battery, to analyse the evolution of ultra-fine particles generated as a result of gas-phase reactions (radiolysis and photolysis). The evolution of aerosols instantaneously produced by radiolysis of gaseous impurities is studied and a theoretical model from the coagulation equation's resolution is shown to well describe the phenomena. Experiments with aerosols continuously produced by photo-oxidation of SO2 show the effect of the condensable molecules production rate and the preexisting aerosol, on the subsequent growth of the primary embryos. Different theoretical models are qualitatively and quantitatively verified. Our experiments are then extended to 'in situ' measurements in urban and marine atmospheres, and in every case, we quantitatively determine the importance of each intervening process, namely nucleation, coagulation and condensation. (author)

  1. Sampling, characterization, and remote sensing of aerosols formed in the atmospheric hydrolysis of uranium hexafluoride

    International Nuclear Information System (INIS)

    When gaseous uranium hexafluoride (UF6) is released into the atmosphere, it rapidly reacts with ambient moisture to form an aerosol of uranyl fluoride (UO2F2) and hydrogen fluoride (HF). As part of our Safety Analysis program, we have performed several experimental releases of HF6 in contained volumes in order to investigate techniques for sampling and characterizing the aerosol materials. The aggregate particle morphology and size distribution have been found to be dependent upon several conditions, including the temperature of the UF6 at the time of its release, the relative humidity of the air into which it is released, and the elapsed time after the release. Aerosol composition and settling rate have been investigated using stationary samplers for the separate collection of UO2F2 and HF and via laser spectroscopic remote sensing (Mie scatter and infrared spectroscopy). 25 refs., 16 figs., 5 tabs

  2. Sampling and characterization of aerosols formed in the atmospheric hydrolysis of UF6

    International Nuclear Information System (INIS)

    When gaseous UF6 is released into the atmosphere, it rapidly reacts with ambient moisture to form an aerosol of uranyl fluoride and HF. As part of our Safety Analysis program, we have performed several experimental releases of UF6 (from natural uranium) in contained volumes in order to investigate techniques for sampling and characterizing the aerosol materials. The aggregrate particle morphology and size distribution have been found to be dependent upon several conditions, including the relative humidity at the time of the release and the elapse time after the release. Aerosol composition and settling rate have been investigated using isokinetic samplers for the separate collection of UO2F2 and HF, and via laser spectroscopic remote sensing (Mie scatter and infrared spectroscopy). 8 references

  3. Reformulating atmospheric aerosol thermodynamics and hygroscopic growth into fog, haze and clouds

    Science.gov (United States)

    Metzger, S.; Lelieveld, J.

    2007-06-01

    Modeling atmospheric aerosol and cloud microphysics is rather complex, even if chemical and thermodynamical equilibrium is assumed. We show, however, that the thermodynamics can be considerably simplified by reformulating equilibrium to consistently include water, and transform laboratory-based concepts to atmospheric conditions. We generalize the thermodynamic principles that explain hydration and osmosis - merely based on solute solubilities - to explicitly account for the water mass consumed by hydration. As a result, in chemical and thermodynamical equilibrium the relative humidity (RH) suffices to determine the saturation molality, including solute and solvent activities (and activity coefficients), since the water content is fixed by RH for a given aerosol concentration and type. As a consequence, gas/liquid/solid aerosol equilibrium partitioning can be solved analytically and non-iteratively. Our new concept enables an efficient and accurate calculation of the aerosol water mass and directly links the aerosol hygroscopic growth to fog, haze and cloud formation. We apply our new concept in the 3rd Equilibrium Simplified Aerosol Model (EQSAM3) for use in regional and global chemistry-transport and climate models. Its input is limited to the species' solubilities from which a newly introduced stoichiometric coefficient for water is derived. Analogously, we introduce effective stoichiometric coefficients for the solutes to account for complete or incomplete dissociation. We show that these coefficients can be assumed constant over the entire activity range and calculated for various inorganic, organic and non-electrolyte compounds, including alcohols, sugars and dissolved gases. EQSAM3 calculates the aerosol composition and gas/liquid/solid partitioning of mixed inorganic/organic multicomponent solutions and the associated water uptake for almost 100 major compounds. It explicitly accounts for particle hygroscopic growth by computing aerosol properties such as

  4. Reformulating atmospheric aerosol thermodynamics and hygroscopic growth into haze and clouds

    Science.gov (United States)

    Metzger, S.; Lelieveld, J.

    2007-01-01

    Modeling atmospheric aerosol and cloud microphysics is rather complex, even if chemical and thermodynamical equilibrium is assumed. We show, however, that the thermodynamics can be considerably simplified by reformulating equilibrium to include water, and transform laboratory-based concepts to atmospheric conditions. We generalize the thermodynamic principles that explain hydration and osmosis - merely based on solute solubilities. In chemical and thermodynamical equilibrium the relative humidity (RH) determines the saturation molality, including solute and solvent activities (and activity coefficients), since the water content is fixed by RH for a given aerosol concentration and type. As a consequence, gas/liquid/solid aerosol equilibrium partitioning can be solved analytically and non-iteratively. Our new concept enables an efficient and accurate calculation of the aerosol water mass and to directly link the aerosol hygroscopic growth to haze and cloud formation. We apply our new concept in the 3rd Equilibrium Simplified Aerosol Model (EQSAM3). Its input is limited to the species' solubilities from which a newly introduced stoichiometric coefficient for water is derived. Analogously, we introduce effective stochiometric coefficients for the solutes to account for complete or incomplete dissociation. We show that these coefficients can be assumed constant over the entire activity range and calculated for various inorganic, organic and non-electrolyte compounds, including alcohols, sugars and dissolved gases. EQSAM3 calculates the aerosol composition and gas/liquid/solid partitioning of mixed inorganic/organic multicomponent solutions and the associated water uptake for almost 100 major compounds. It explicitly accounts for particle hygroscopic growth by computing aerosol properties such as single solute molalities, molal based activities, including activity coefficients for volatile compounds, and deliquescence relative humidities of mixed solutes. Various

  5. Reformulating atmospheric aerosol thermodynamics and hygroscopic growth into haze and clouds

    Directory of Open Access Journals (Sweden)

    S. Metzger

    2007-01-01

    Full Text Available Modeling atmospheric aerosol and cloud microphysics is rather complex, even if chemical and thermodynamical equilibrium is assumed. We show, however, that the thermodynamics can be considerably simplified by reformulating equilibrium to include water, and transform laboratory-based concepts to atmospheric conditions. We generalize the thermodynamic principles that explain hydration and osmosis – merely based on solute solubilities. In chemical and thermodynamical equilibrium the relative humidity (RH determines the saturation molality, including solute and solvent activities (and activity coefficients, since the water content is fixed by RH for a given aerosol concentration and type. As a consequence, gas/liquid/solid aerosol equilibrium partitioning can be solved analytically and non-iteratively. Our new concept enables an efficient and accurate calculation of the aerosol water mass and to directly link the aerosol hygroscopic growth to haze and cloud formation.

    We apply our new concept in the 3rd Equilibrium Simplified Aerosol Model (EQSAM3. Its input is limited to the species' solubilities from which a newly introduced stoichiometric coefficient for water is derived. Analogously, we introduce effective stochiometric coefficients for the solutes to account for complete or incomplete dissociation. We show that these coefficients can be assumed constant over the entire activity range and calculated for various inorganic, organic and non-electrolyte compounds, including alcohols, sugars and dissolved gases. EQSAM3 calculates the aerosol composition and gas/liquid/solid partitioning of mixed inorganic/organic multicomponent solutions and the associated water uptake for almost 100 major compounds. It explicitly accounts for particle hygroscopic growth by computing aerosol properties such as single solute molalities, molal based activities, including activity coefficients for volatile compounds, and deliquescence relative humidities

  6. Reformulating atmospheric aerosol thermodynamics and hygroscopic growth into fog, haze and clouds

    Directory of Open Access Journals (Sweden)

    S. Metzger

    2007-06-01

    Full Text Available Modeling atmospheric aerosol and cloud microphysics is rather complex, even if chemical and thermodynamical equilibrium is assumed. We show, however, that the thermodynamics can be considerably simplified by reformulating equilibrium to consistently include water, and transform laboratory-based concepts to atmospheric conditions. We generalize the thermodynamic principles that explain hydration and osmosis – merely based on solute solubilities – to explicitly account for the water mass consumed by hydration. As a result, in chemical and thermodynamical equilibrium the relative humidity (RH suffices to determine the saturation molality, including solute and solvent activities (and activity coefficients, since the water content is fixed by RH for a given aerosol concentration and type. As a consequence, gas/liquid/solid aerosol equilibrium partitioning can be solved analytically and non-iteratively. Our new concept enables an efficient and accurate calculation of the aerosol water mass and directly links the aerosol hygroscopic growth to fog, haze and cloud formation.

    We apply our new concept in the 3rd Equilibrium Simplified Aerosol Model (EQSAM3 for use in regional and global chemistry-transport and climate models. Its input is limited to the species' solubilities from which a newly introduced stoichiometric coefficient for water is derived. Analogously, we introduce effective stoichiometric coefficients for the solutes to account for complete or incomplete dissociation. We show that these coefficients can be assumed constant over the entire activity range and calculated for various inorganic, organic and non-electrolyte compounds, including alcohols, sugars and dissolved gases. EQSAM3 calculates the aerosol composition and gas/liquid/solid partitioning of mixed inorganic/organic multicomponent solutions and the associated water uptake for almost 100 major compounds. It explicitly accounts for particle hygroscopic growth by

  7. Chemical characterization of submicron aerosol and particle growth events at a national background site (3295 m a.s.l.) on the Tibetan Plateau

    OpenAIRE

    Du, W.; Y. L. Sun; Xu, Y S; Jiang, Q.; Q. Q. Wang; Yang, W.; Wang, F.; Z. P. Bai; Zhao, X. D.; Yang, Y. C.

    2015-01-01

    Atmospheric aerosols exert highly uncertain impacts on radiative forcing and also have detrimental effects on human health. While aerosol particles are widely characterized in megacities in China, aerosol composition, sources and particle growth in rural areas in the Tibetan Plateau remain less understood. Here we present the results from an autumn study that was conducted from 5 September to 15 October 2013 at a national background monitoring station (3295 m a.s.l.) in the ...

  8. Chemical characterization of submicron aerosol and particle growth events at a national background site (3295 m a.s.l.) in the Tibetan Plateau

    OpenAIRE

    Du, W.; Y. L. Sun; Xu, Y S; Jiang, Q.; Q. Q. Wang; Yang, W.; Wang, F.; Z. P. Bai; Zhao, X. D.; Yang, Y. C.

    2015-01-01

    Atmospheric aerosols exert highly uncertain impacts on radiative forcing and also have detrimental effects on human health. While aerosol particles are widely characterized in megacities in China, aerosol composition, sources and particle growth in rural areas in the Tibetan Plateau remain less understood. Here we present the results from an autumn study that was conducted from 5 September to 15 October 2013 at a national background monitoring station (3295 ...

  9. Ultrafine particles in the atmosphere

    CERN Document Server

    Brown, L M; Harrison, R M; Maynard, A D; Maynard, R L

    2003-01-01

    Following the recognition that airborne particulate matter, even at quite modest concentrations, has an adverse effect on human health, there has been an intense research effort to understand the mechanisms and quantify the effects. One feature that has shone through is the important role of ultrafine particles as a contributor to the adverse effects of airborne particles. In this volume, many of the most distinguished researchers in the field provide a state-of-the-art overview of the scientific and medical research on ultrafine particles. Contents: Measurements of Number, Mass and Size Distr

  10. Nanostructured Aerosol Particles: Fabrication, Pulmonary Drug Delivery, and Controlled Release

    Directory of Open Access Journals (Sweden)

    Xingmao Jiang

    2011-01-01

    Full Text Available Pulmonary drug delivery is the preferred route of administration in the treatment of respiratory diseases and some nonrespiratory diseases. Recent research has focused on developing structurally stable high-dosage drug delivery systems without premature release. To maximize the deposition in the desired lung regions, several factors must be considered in the formulation. The special issue includes seven papers deal with aerosol-assisted fabrication of nanostructured particles, aerosol deposition, nanoparticles pulmonary exposure, and controlled release.

  11. Characteristics and Composition of Atmospheric Aerosols in Phimai, Central Thailand During BASE-ASIA

    Science.gov (United States)

    Li, Can; Tsay, Si-Chee; Hsu, N. Christina; Kim, Jin Young; Howell, Steven G.; Huebert, Barry J.; Ji, Qiang; Jeong, Myeong-Jae; Wang, Sheng-Hsiang; Hansell, Richard A.; Bell, Shaun W.

    2012-01-01

    Popular summary: Atmospheric aerosols play an important role in the Earth's climate system, and can also have adverse effects on air quality and human health. The environmental impacts of aerosols, on the other hand, are highly regional, since their temporal/spatial distribution is inhomogeneous and highly depends on the regional emission sources. To better understand the effects of aerosols, intensive field experiments are necessary to characterize the chemical and physical properties on a region-by-region basis. From late February to early May in 2006, NASA/GSFC's SMARTLabs facility was deployed at a rural site in central Thailand, Southeast Asia, to conduct a field experiment dubbed BASE-ASIA (Biomass-burning Aerosols in South East-Asia: Smoke Impact Assessment). The group was joined by scientists from the University of Hawaii and other regional institutes. Comprehensive measurements were made during the experiment, including aerosol chemical composition, optical and microphysical properties, as well as surface energetics and local . meteorology. This study analyzes part of the data from the BASE-ASIA experiment. It was found that, even for the relatively remote rural site, the aerosol loading was still substantial. Besides agricultural burning in the area, industrial pollution near the Bangkok metropolitan area, about 200 km southeast of the site, and even long-range transport from China, also contribute to the area's aerosol loading. The results indicate that aerosol pollution has developed into a regional problem for northern Indochina, and may become more severe as the region's population and economy continue to grow. Abstract: Comprehensive measurements of atmospheric aerosols were made in Phimai, central Thailand (15.l83 N, 102.565 E, elevation: 206 m) during the BASE-ASIA field experiment from late February to early May in 2006. The observed aerosol loading was sizable for this rural site (mean aerosol scattering: 108 +/- 64 Mm(exp -1); absorption: 15

  12. Analysis of atmospheric aerosols by atomic emission spectrometry with electrical discharge sampling

    International Nuclear Information System (INIS)

    A procedure is developed for the determination of the concentration of heavy metals (Pb, Mn, Cu, Ni, Zn, and Cd) in atmospheric air by atomic emission spectrometry with gas-discharge sampling onto the end of a standard carbon electrode. A design of a two-section sampler is proposed; the sampler provides the rapid determination of deposition factors for the deposition of heavy metals contained in aerosol particles onto the end of a carbon electrode. Examples of determining metal concentrations in a model sample of air and in atmospheric air and determination limits of metals deposited onto the end of a carbon electrode are given

  13. Physicochemical and Toxicological Characteristics of Semi-volatile Components of Atmospheric Aerosols in an Urban Environment

    Science.gov (United States)

    Verma, V.; Pakbin, P.; Cheung, K. L.; Cho, A. K.; Schauer, J. J.; Shafer, M. M.; Kleinman, M. T.; Sioutas, C.

    2010-12-01

    Recent toxicological studies have confirmed the oxidative properties of atmospheric aerosols and their capability to generate reactive oxygen species (ROS) in biological systems (Chen and Lippmann, 2009). While the links between aerosol toxicity and refractory transition metals present in ambient particulate matter (PM) have been documented, there are limited studies investigating the oxidative characteristics of semi-volatile species. The goal of present study is to examine the contribution of semi-volatile compounds in the oxidative potential of atmospheric aerosols. Concentrated ambient and thermodenuded quasi-ultrafine particles (dithiothreitol) assay. Detailed chemical analyses of PM samples, including organic and elemental carbon, water soluble elements, inorganic ions and polycyclic aromatic hydrocarbons (PAHs), were conducted to quantify the volatility profiles of different PM species, and also to investigate their effect on the measured oxidative potential. Refractory constituents, such as metals and elemental carbon, were marginally affected by heating, while labile species such as organic carbon and PAHs showed progressive loss in concentration with increase in TD temperature. The DTT-measured oxidative potential of PM was significantly decreased as the aerosols were heated and their semi-volatile components were progressively removed (42 %, 47 % and 66 % decrease in DTT activity at 50, 100 and 200 oC, respectively). Regression analysis performed between chemical constituents and DTT activity showed that the oxidative potential was strongly correlated with organic carbon and PAHs (R≥0.80; p≤0.05). Thus, semi-volatile organic compounds present in atmospheric aerosols constitute a substantial fraction of the PM oxidative potential, which is largely responsible for the aerosol toxicity. References: Chen, L.C., Lippmann, M., 2009. Effects of metals within ambient air particulate matter (PM) on human health. Inhalation Toxicology 21 (1), 1-31.

  14. Laboratory Experiments and Instrument Development for the Study of Atmospheric Aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Davidovits, Paul

    2011-12-10

    Soot particles are generated by incomplete combustion of fossil and biomass fuels. Through direct effects clear air aerosols containing black carbon (BC) such as soot aerosols, absorb incoming light heating the atmosphere, while most other aerosols scatter light and produce cooling. Even though BC represents only 1-2% of the total annual emissions of particulate mass to the atmosphere, it has been estimated that the direct radiative effect of BC is the second-most important contributor to global warming after absorption by CO2. Ongoing studies continue to underscore the climate forcing importance of black carbon. However, estimates of the radiative effects of black carbon on climate remain highly uncertain due to the complexity of particles containing black carbon. Quantitative measurement of BC is challenging because BC often occurs in highly non-spherical soot particles of complex morphology. Freshly emitted soot particles are typically fractal hydrophobic aggregates. The aggregates consist of black carbon spherules with diameters typically in the range of about 15-40 nm, and they are usually coated by adsorbed polyaromatic hydrocarbons (PAHs) produced during combustion. Diesel-generated soot particles are often emitted with an organic coating composed primarily of lubricating oil and unburned fuel, as well as well as PAH compounds. Sulfuric acid has also been detected in diesel and aircraft-emitted soot particles. In the course of aging, these particle coatings may be substantially altered by chemical reactions and/or the deposition of other materials. Such processes transform the optical and CCN properties of the soot aerosols in ways that are not yet well understood. Our work over the past seven years consisted of laboratory research, instrument development and characterization, and field studies with the central focus of improving our understanding of the black carbon aerosol climate impacts. During the sixth year as well as during this seventh year (no

  15. New planetary atmosphere simulations: application to the organic aerosols of Titan

    Science.gov (United States)

    Coll, Patrice; Cosia, David; Gazeau, Marie-Claire; Raulin, François

    1997-05-01

    The atmosphere of Titan partly consists of hazes and aerosol particles. Experimental simulation is one of the powerful approaches to study the processes which yield these particles, and their chemical composition. It provides laboratory analogues, sometimes called tholins. Development and optimization of experiemental tools were undertaken in order to perform chemical and physical analyses of analogues under conditions free from contamination. A ``Titan aerosol generator'' was developed in the frame of the Cassini-Huygens mission, in order to produce Titan's aerosol analogues within conditions closer to those of the titanian atmosphere : cold plasma simulation system, low pressure and low temperature. The direct current (DC) glow discharge is produced by applying a DC voltage between two conductive electrodes inserted into the gas mixture -model of the studied atmosphere- at low pressure. A high-impedance power supply is used to provide the electrical field. All the system is installed in a glove box, which protect samples from any contamination. Finally the research program expected with this new material is presented.

  16. Measurement, growth types and shrinkage of newly formed aerosol particles at an urban research platform

    Science.gov (United States)

    Salma, Imre; Németh, Zoltán; Weidinger, Tamás; Kovács, Boldizsár; Kristóf, Gergely

    2016-06-01

    Budapest platform for Aerosol Research and Training (BpART) was created for advancing long-term on-line atmospheric measurements and intensive aerosol sample collection campaigns in Budapest. A joint study including atmospheric chemistry or physics, meteorology, and fluid dynamics on several-year-long data sets obtained at the platform confirmed that the location represents a well-mixed, average atmospheric environment for the city centre. The air streamlines indicated that the host and neighbouring buildings together with the natural orography play an important role in the near-field dispersion processes. Details and features of the airflow structure were derived, and they can be readily utilised for further interpretations. An experimental method to determine particle diffusion losses in the differential mobility particle sizer (DMPS) system of the BpART facility was proposed. It is based on CPC-CPC (condensation particle counter) and DMPS-CPC comparisons. Growth types of nucleated particles observed in 4 years of measurements were presented and discussed specifically for cities. Arch-shaped size distribution surface plots consisting of a growth phase followed by a shrinkage phase were characterised separately since they supply information on nucleated particles. They were observed in 4.5 % of quantifiable nucleation events. The shrinkage phase took 1 h 34 min in general, and the mean shrinkage rate with standard deviation was -3.8 ± 1.0 nm h-1. The shrinkage of particles was mostly linked to changes in local atmospheric conditions, especially in global radiation and the gas-phase H2SO4 concentration through its proxy, or to atmospheric mixing in few cases. Some indirect results indicate that variations in the formation and growth rates of nucleated particles during their atmospheric transport could be a driving force of shrinkage for particles of very small sizes and on specific occasions.

  17. Concentrations and fluxes of aerosol particles during the LAPBIAT measurement campaign in Värriö field station

    Directory of Open Access Journals (Sweden)

    T. M. Ruuskanen

    2007-01-01

    Full Text Available The LAPBIAT measurement campaign took place in the SMEAR I measurement station located in Eastern Lapland in the spring of 2003 between 26 April and 11 May. In this paper we describe the measurement campaign, concentrations and fluxes of aerosol particles, air ions and trace gases, paying special attention to an aerosol particle formation event broken by a polluted air mass approaching from industrial areas of Kola Peninsula, Russia. Aerosol particle number flux measurements show strong downward fluxes during that time. Concentrations of coarse aerosol particles were high for 1–2 days before the nucleation event (i.e. 28–29 April, very low immediately before and during the observed aerosol particle formation event (30 April and increased moderately from the moment of sudden break of the event. In general particle deposition measurements based on snow samples show the same changes. Measurements of the mobility distribution of air ions showed elevated concentrations of intermediate air ions during the particle formation event. We estimated the growth rates in the nucleation mode size range. For particles <10 nm, the growth rate increases with size on 30 April. Dispersion modelling made with model SILAM support the conclusion that the nucleation event was interrupted by an outbreak of sulphate-rich air mass in the evening of 30 April that originated from the industry at Kola Peninsula, Russia. The results of this campaign highlight the need for detailed research in atmospheric transport of air constituents for understanding the aerosol dynamics.

  18. The role of marine aerosols in atmospheric corrosion of metals

    International Nuclear Information System (INIS)

    The next problems are discussed: 1) connection between quantity of deposited sea chloride aerosols and wind regime at the Russian corrosion stations and in some points of the Far East; 2) effect of the distance from the sea cost on the chloride carrying out and metal corrosion: 3) effect of rain precipitation on the chloride surface concentration; 4) some results of atmospheric tests of main structural materials (carbon steel, copper, zinc, aluminium). 18 refs., 7 figs., 7 tabs

  19. Connection of Atmospheric Stability and Aerosol and Gaseous Polutants Concentration

    Czech Academy of Sciences Publication Activity Database

    Zíková, Naděžda; Ždímal, Vladimír

    Twickenham, Middlesex : Mineralogical Society, 2011 - (Mitchell, R.; Williams, P.), s. 2286 ISSN 0026-461X. [Goldschmidt 2011. Prague (CZ), 14.08.2011-19.08.2011] R&D Projects: GA ČR GAP209/11/1342 Grant ostatní: UK(CZ) SVV-2011-263308 Institutional research plan: CEZ:AV0Z40720504 Keywords : atmospheric stability * aerosol * gaseous polutants Subject RIV: CF - Physical ; Theoretical Chemistry www.minersoc.org

  20. Factors Affecting Formation and Growth Rate of Atmospheric Aerosols

    Czech Academy of Sciences Publication Activity Database

    Levdansky, V.V.; Smolík, Jiří; Moravec, Pavel

    2010, AC-4 /58/. ISBN N. [Environmental Physics Conference /4./. Hurghada (EG), 10.03.2010-14.03.2010] R&D Projects: GA ČR GA101/09/1633; GA ČR GA104/07/1093; GA AV ČR(CZ) IAA400720804 Institutional research plan: CEZ:AV0Z40720504 Keywords : atmospheric aerosols * nucleation * theoretical study Subject RIV: CF - Physical ; Theoretical Chemistry http://www.physicsegypt.org/epc10/

  1. Propagation of nuclear particle fluxes in atmosphere

    International Nuclear Information System (INIS)

    The Monte Carlo model of propagation of nuclear-active particle shower initiated in the atmosphere by cosmic rays or by any other radiation source is developed. The model permits to calculate spatial distributions and energy spectra of charged and neutral particle fluxes in the air and inside the blocks

  2. Glyoxal processing by aerosol multiphase chemistry: towards a kinetic modeling framework of secondary organic aerosol formation in aqueous particles

    Directory of Open Access Journals (Sweden)

    B. Ervens

    2010-09-01

    Full Text Available This study presents a modeling framework based on laboratory data to describe the kinetics of glyoxal reactions that form secondary organic aerosol (SOA in aqueous aerosol particles. Recent laboratory results on glyoxal reactions are reviewed and a consistent set of empirical reaction rate constants is derived that captures the kinetics of glyoxal hydration and subsequent reversible and irreversible reactions in aqueous inorganic and water-soluble organic aerosol seeds. Products of these processes include (a oligomers, (b nitrogen-containing products, (c photochemical oxidation products with high molecular weight. These additional aqueous phase processes enhance the SOA formation rate in particles and yield two to three orders of magnitude more SOA than predicted based on reaction schemes for dilute aqueous phase (cloud chemistry for the same conditions (liquid water content, particle size.

    The application of the new module including detailed chemical processes in a box model demonstrates that both the time scale to reach aqueous phase equilibria and the choice of rate constants of irreversible reactions have a pronounced effect on the predicted atmospheric relevance of SOA formation from glyoxal. During day time, a photochemical (most likely radical-initiated process is the major SOA formation pathway forming ∼5 μg m−3 SOA over 12 h (assuming a constant glyoxal mixing ratio of 300 ppt. During night time, reactions of nitrogen-containing compounds (ammonium, amines, amino acids contribute most to the predicted SOA mass; however, the absolute predicted SOA masses are reduced by an order of magnitude as compared to day time production. The contribution of the ammonium reaction significantly increases in moderately acidic or neutral particles (5 < pH < 7.

    Glyoxal uptake into ammonium sulfate seed under dark conditions can be represented with a single reaction parameter keffupt that does not depend

  3. Composition of carbonaceous smoke particles from prescribed burning of a Canadian boreal forest: 1. Organic aerosol characterization by gas chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Mazurek, M.A.; Laterza, C.; Newman, L.; Daum, P. [Brookhaven National Lab., Upton, NY (United States); Cofer, W.R. III; Levine, J.S. [National Aeronautics and Space Administration, Hampton, VA (United States). Langley Research Center; Winstead, E.L. [Science Applications International Corporation, Hampton, VA (United States)

    1995-06-01

    In this study we examine the molecular organic constituents (C8 to C40 lipid compounds) collected as smoke particles from a Canadian boreal forest prescribed burn. Of special interest are (1) the molecular identity of polar organic aerosols, and (2) the amount of polar organic matter relative to the total mass of aerosol particulate carbon. Organic extracts of smoke aerosol particles show complex distributions of the lipid compounds when analyzed by capillary gas chromatography/mass spectrometry. The molecular constituents present as smoke aerosol are grouped into non-polar (hydrocarbons) and polar {minus}2 oxygen atoms) subtractions. The dominant chemical species found in the boreal forest smoke aerosol are unaltered resin compounds (C20 terpenes) which are abundant in unburned conifer wood, plus thermally altered wood lignins and other polar aromatic hydrocarbons. Our results show that smoke aerosols contain molecular tracers which are related to the biofuel consumed. These smoke tracers can be related structurally back to the consumed softwood and hardwood vegetation. In addition, combustion of boreal forest materials produces smoke aerosol particles that are both oxygen-rich and chemically complex, yielding a carbonaceous aerosol matrix that is enriched in polar substances. As a consequence, emissions of carbonaceous smoke particles from large-scale combustion of boreal forest land may have a disproportionate effect on regional atmospheric chemistry and on cloud microphysical processes.

  4. Atmospheric effects of nuclar war aerosols in general circulation model simulations: Influence of smoke optical properties

    International Nuclear Information System (INIS)

    A global atmospheric general circulation model (GCM) is modified to include radiative transfer parameterizations for the absorption and scattering of solar radiation and the absorption of thermal infrared (IR) radiation by smoke aerosols. The solar scattering modifications include a parameterization for diagnosing smoke optical properties as a function of the time- and space-dependent smoke particle radii. The aerosol IR modifications allow for both the ''grey'' absorber approximation and a broadband approximation that resolves the aerosol absorption in four spectral intervals. We examine the sensitivity of some GCM-simulated atmospheric and climatic effects to the optical properties and radiative transfer parameterizations used in studies of massive injections of smoke. Specifically, we test the model response to solar scattering versus nonscattering smoke, variations in prescribed smoke single scattering albedo and IR specific absorption, and interactive versus fixed smoke optical properties. Hypothetical nuclear war created smoke scenarios assume the July injection of 60 or 180 Tg of smoke over portions of the mid-latitude land areas of the northern hemisphere. Atmospheric transport and scavenging of the smoke are included. Nonscattering smoke cases produce roughly 40 Wm/sup -2/ more Earth-atmosphere solar irradiance absorption over the northern hemisphere, when compared to scattering smoke cases having equivalent specific absorption efficiencies. Varying the elemental carbon content of smoke over a plausible range produces a 40--6 0C change in average mid-latitude land surface temperature, and a variation of about 0.1 in zonally averaged planetary albedo in the northern hemisphere

  5. Response of dual-wavelength optical particle spectrometer (DWOPS) to well-defined aerosols

    International Nuclear Information System (INIS)

    Full text: It is a recognized fact that more information is contained in the spatial distribution of light scattered from a particle than is currently used in conventional spectrometers. Employing multiple detectors to study the elastically scattered light gives access to a description of a particle size, leading also to information on a particle's refractive index and maybe shape. The DWOPS measures and evaluates light scattered from an individual particle into four different angular ranges. This data corresponds to theoretically determinable instrument's responses for a given particle. A fit procedure finds the quadruple of theoretical values best matching the quadruple of measured values. Experiments with well-defined spherical, homogeneous aerosols will be reported and show that a unique particle sizing and also an unambiguous determination of the complex refractive indices of measured particles is possible. It must be mentioned that the particle measurement and evaluation of performance is based on the postulation of sphericity of aerosols in question, which may be assumed for many submicron atmospheric particles. The irregular shape of particles is an inherent difficulty in single optical particle spectrometry. Preliminary measurements with DWOPS are promissing in dealing with this issue. (author)

  6. Sampling of Atmospheric Aerosols by Electrostatic Precipitation for Direct Analyses. Part 1

    CERN Document Server

    Hermann, G; Matz, R; Trenin, A; Moritz, W; Hermann, Gerd; Lasnitschka, Georg; Matz, Rudolf; Trenin, Alexander; Moritz, Walter

    2002-01-01

    A novel system for aerosol sampling by electrostatic precipitation using graphite platforms as sample collector is presented. Employing standard platforms for commercial analytical instruments, the conception allows fast solid sampling direct element analysis with ETAAS, ETV-ICP-MS/OES, and ETACFS without any wet digestive pre-treatment. Other advantages are: highly efficient electrostatic particle collection (>99% for d = 10e-9 m - 10e-6 m), reusable sample collectors, omission of filters and chemical reagents. On this basis, an electrostatic precipitator is constructed aiming at a small, relatively uncomplicated instrument. Ten precipitators are arranged in a multi-sampling apparatus for outdoor operation, which simultaneously collect ten samples on same or different collectors for instrumental element analyses, or for microscopic investigations of the collected particles. The precipitator is tested with different model aerosols as well as with atmospheric sampling. Element analysis is carried out with the ...

  7. Sampling of Atmospheric Aerosols by Electrostatic Precipitation for Direct Analyses. Part 2

    CERN Document Server

    Hermann, G; Matz, R; Trenin, A; Moritz, W; Hermann, Gerd; Lasnitschka, Georg; Matz, Rudolf; Trenin, Alexander; Moritz, Walter

    2002-01-01

    A novel system for aerosol sampling by electrostatic precipitation using graphite platforms as sample collector is presented. Employing standard platforms for commercial analytical instruments, the conception allows fast solid sampling direct element analysis with ETAAS, ETV-ICP-MS/OES, and ETACFS without any wet digestive pre-treatment. Other advantages are: highly efficient electrostatic particle collection (>99% for d = 10e-9 m - 10e-6 m), reusable sample collectors, omission of filters and chemical reagents. On this basis, an electrostatic precipitator is constructed aiming at a small, relatively uncomplicated instrument. Ten precipitators are arranged in a multi-sampling apparatus for outdoor operation, which simultaneously collect ten samples on same or different collectors for instrumental element analyses, or for microscopic investigations of the collected particles. The precipitator is tested with different model aerosols as well as with atmospheric sampling. Element analysis is carried out with the ...

  8. Polarization properties of aerosol particles over western Japan: classification, seasonal variation, and implications for air quality

    Science.gov (United States)

    Pan, Xiaole; Uno, Itsushi; Hara, Yukari; Osada, Kazuo; Yamamoto, Shigekazu; Wang, Zhe; Sugimoto, Nobuo; Kobayashi, Hiroshi; Wang, Zifa

    2016-08-01

    Ground-based observation of the polarization properties of aerosol particles using a polarization optical particle counter (POPC) was made from 27 October 2013, to 31 December 2015, at a suburban site in the Kyushu area of Japan. We found that the depolarization ratio (DR, the fraction of s-polarized signal in the total backward light scattering signal) of aerosol particles showed prominent seasonal variability, with peaks in spring (0.21-0.23) and winter (0.19-0.23), and a minimum value (0.09-0.14) in summer. The aerosol compositions in both fine mode (aerodynamic diameter of particle, Dp particles, sea salt, and anthropogenic pollution-dominant aerosols. The DR value increased with increasing particle size, and DR = 0.1 was a reliable threshold value to identify the sphericity of supermicron (Dp > 1 µm) particles. Occurrence of substandard air quality days in Kyushu was closely related with mixed type (coexistence of anthropogenic pollutants and dust particles in the atmosphere), especially in winter and spring, indicating that dust events in the Asian continent played a key role in the cross-boundary transport of continental pollution. Backward trajectory analysis demonstrated that air masses originating from the western Pacific contained large amounts of spherical particles due to the influence of sea salt, especially in summer; however, for air masses from the Asian continent, the dependence of number fraction of spherical particles on air relative humidity was insignificant, indicating the predominance of less-hygroscopic substances (e.g., mineral dust), although the mass concentrations of anthropogenic pollutants were elevated.

  9. A marine biogenic source of atmospheric ice-nucleating particles

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, T. W.; Ladino, L. A.; Alpert, Peter A.; Breckels, M. N.; Brooks, I. M.; Browse, J.; Burrows, Susannah M.; Carslaw, K. S.; Huffman, J. A.; Judd, C.; Kilthau, W. P.; Mason, R. H.; McFiggans, Gordon; Miller, L. A.; Najera, J.; Polishchuk, E. A.; Rae, S.; Schiller, C. L.; Si, M.; Vergara Temprado, J.; Whale, Thomas; Wong, J P S; Wurl, O.; Yakobi-Hancock, J. D.; Abbatt, JPD; Aller, Josephine Y.; Bertram, Allan K.; Knopf, Daniel A.; Murray, Benjamin J.

    2015-09-09

    The formation of ice in clouds is facilitated by the presence of airborne ice nucleating particles1,2. Sea spray is one of the major global sources of atmospheric particles, but it is unclear to what extent these particles are capable of nucleating ice3–11. Here we show that material in the sea surface microlayer, which is enriched in surface active organic material representative of that found in sub-micron sea- spray aerosol12–21, nucleates ice under conditions that occur in mixed-phase clouds and high-altitude ice clouds. The ice active material is likely biogenic and is less than ~0.2 ?m in size. We also show that organic material (exudate) released by a common marine diatom nucleates ice when separated from cells and propose that organic material associated with phytoplankton cell exudates are a candidate for the observed ice nucleating ability of the microlayer samples. By combining our measurements with global model simulations of marine organic aerosol, we show that ice nucleating particles of marine origin are dominant in remote marine environments, such as the Southern Ocean, the North Pacific and the North Atlantic.

  10. Visualization of aerosol particles generated by near infrared nano- and femtosecond laser ablation

    International Nuclear Information System (INIS)

    The expansion of aerosols generated by near infrared (NIR) nanosecond (ns) and femtosecond (fs) laser ablation (LA) of metals at atmospheric pressures was explored by laser-induced scattering. In order to achieve adequate temporal and spatial resolution a pulsed laser source was utilized for illuminating a 0.5 mm-wide cross section of the expanding aerosol. It could, for instance, be shown that NIR-ns-LA under quiescent argon atmosphere provokes the formation of a dense aerosol confined within a radially propagating vortex ring. The expansion dynamics achieved under these conditions were found to be fairly slow whereas the degree of aerosol dispersion for NIR-ns-LA using helium drastically increased due to its lower viscosity. As a consequence, the maximum diameter of expansion differed by a factor of approximately four. The trajectories of aerosol particles generated by NIR-ns-LA using argon could, furthermore, be simulated on the basis of computational fluid dynamics (CFD). For this purpose, a model inspired by the thermal character of NIR-ns-LA taking into account a sudden temperature build-up of 10,000 K at the position of the laser focus was implemented. In contrast, NIR-fs-LA generally resulted in extremely dynamic expansion patterns. Initial aerosol velocities derived from corresponding expansion plots varied from 10 m/s up to 30 m/s for fs-LA using argon and helium, respectively. Our results, moreover, indicate that fs-LA carried out under helium atmosphere favours a chaotic aerosol expansion. Analytical implications concerning, e.g. dispersion phenomena or the choice of the LA protocol and physical dimensions of future ablation cell designs are discussed

  11. Atmospheric Aerosol Sampling with Unmanned Aircraft Systems (UAS) in Alaska: Instrument Development, Payload Integration, and Measurement Campaigns

    Science.gov (United States)

    Barberie, S. R.; Saiet, E., II; Hatfield, M. C.; Cahill, C. F.

    2014-12-01

    Atmospheric aerosols remain one of biggest variables in understanding global climate. The number of feedback loops involved in aerosol processes lead to nonlinear behavior at the systems level, making confident modeling and prediction difficult. It is therefore important to ground-truth and supplement modeling efforts with rigorous empirical measurements. To this end, the Alaska Center for Unmanned Aircraft Systems Integration (ACUASI) at the University of Alaska Fairbanks has developed a new cascade DRUM-style impactor to be mounted aboard a variety of unmanned aircraft and work in tandem with an optical particle counter for the routine collection of atmospheric aerosols. These UAS-based aerosol samplers will be employed for measurement campaigns in traditionally hazardous conditions such as volcanic plumes and over forest fires. Here we report on the development and laboratory calibration of the new instrument, the integration with UAS, and the vertical profiling campaigns being undertaken.

  12. Comparison of spring and autumn time collected outdoor aerosol particles analyzed with depth-resolving SNMS

    Science.gov (United States)

    Goschnick, J.; Natzeck, C.; Sommer, M.

    1999-04-01

    Aerosol particles were collected in a size-classified way at the Forschungszentrum Karlsruhe during two autumn days of fine weather in September 1997 in order to analyze the depth distribution of the chemical inventory. The fine particles (1 μm diameter) consisted of soil dust or fly ash and sodium salt containing particles. Again the particle composition in greater depth was found to be different to the surface region, where nitrogen and sulfur as well as carbon were enriched. The surface-near nitrogen and sulfur could be attributed to ammonium sulfate, maybe deposited by particulate material formed from ammonia and SO x in the atmosphere. The results agree to a large degree with the analysis of outdoor particles collected at the same location but in spring time four years ago. However, the autumn particles of 1997 exhibited with 600 nm twice the diameter for the most frequent size compared to the particles sampled in spring of 1993.

  13. MATRIX (Multiconfiguration Aerosol TRacker of mIXing state): an aerosol microphysical module for global atmospheric models

    OpenAIRE

    S. E. Bauer; Wright, D. L.; D. Koch; Lewis, E. R.; McGraw, R; Chang, L.-S.; S. E. Schwartz; R. Ruedy

    2008-01-01

    A new aerosol microphysical module MATRIX, the Multiconfiguration Aerosol TRacker of mIXing state, and its application in the Goddard Institute for Space Studies (GISS) climate model (ModelE) are described. This module, which is based on the quadrature method of moments (QMOM), represents nucleation, condensation, coagulation, internal and external mixing, and cloud-drop activation and provides aerosol particle mass and number concentration and particle size information for up to 16 mixed-mod...

  14. MATCH-SALSA – Multi-scale Atmospheric Transport and CHemistry model coupled to the SALSA aerosol microphysics model – Part 1: Model description and evaluation

    OpenAIRE

    Andersson, C.; Bergström, R; Bennet, C.; Robertson, L.; Thomas, M.; Korhonen, H.; Lehtinen, K. E. J.; H. Kokkola

    2015-01-01

    We have implemented the sectional aerosol dynamics model SALSA (Sectional Aerosol module for Large Scale Applications) in the European-scale chemistry-transport model MATCH (Multi-scale Atmospheric Transport and Chemistry). The new model is called MATCH-SALSA. It includes aerosol microphysics, with several formulations for nucleation, wet scavenging and condensation. The model reproduces observed higher particle number concentration (PNC) in central Europe and lower c...

  15. Ice cloud processing of ultra-viscous/glassy aerosol particles leads to enhanced ice nucleation ability

    Directory of Open Access Journals (Sweden)

    B. J. Murray

    2012-04-01

    Full Text Available The ice nucleation potential of airborne glassy aqueous aerosol particles has been investigated by controlled expansion cooling cycles in the AIDA aerosol and cloud chamber of the Karlsruhe Institute of Technology at temperatures between 247 and 216 K. Four different solutes were used as proxies for oxygenated organic matter found in the atmosphere: raffinose, 4-hydroxy-3-methoxy-DL-mandelic acid (HMMA, levoglucosan, and a multi-component mixture of raffinose with five dicarboxylic acids and ammonium sulphate. Similar to previous experiments with citric acid aerosols, all particles were found to nucleate ice heterogeneously before reaching the homogeneous freezing threshold provided that the freezing cycles were started well below the respective glass transition temperatures of the compounds; this is discussed in detail in a separate article. In this contribution, we identify a further mechanism by which glassy aerosols can promote ice nucleation below the homogeneous freezing limit. If the glassy aerosol particles are probed in freezing cycles started only a few degrees below their respective glass transition temperatures, they enter the liquid regime of the state diagram upon increasing relative humidity (moisture-induced glass-to-liquid transition before being able to act as heterogeneous ice nuclei. Ice formation then only occurs by homogeneous freezing at elevated supersaturation levels. When ice forms the remaining solution freeze concentrates and re-vitrifies. If these ice cloud processed glassy aerosol particles are then probed in a second freezing cycle at the same temperature, they catalyse ice formation at a supersaturation threshold between 5 and 30% with respect to ice. By analogy with the enhanced ice nucleation ability of insoluble ice nuclei like mineral dusts after they nucleate ice once, we refer to this phenomenon as pre-activation. We propose a number of possible explanations for why glassy aerosols that have re-vitrified in

  16. Deposition of submicron aerosol particles in turbulent and transitional flow

    International Nuclear Information System (INIS)

    Brownian and turbulent diffusive deposition of submicron aerosol particles from pipe flow is studied experimentally and theoretically. A theoretical model for evaluating the turbulent diffusive deposition is presented in which a turbulent flow in a circular pipe is numerically calculated based on the k-ε turbulent flow model and deposition velocities are derived by solving the convection-diffusion equation. Deposition velocities of monodisperse aerosol particles, 0.01-0.04 μm in diameter, are obtained experimentally by measuring the decrease in the particle number concentration of an aerosol at two cross-sections of a circular test pipe through which the aerosol is flowing. The deposition velocities obtained when Re is larger than about 3,000 agree well with those predicted by the present analysis which are proportional to the 0.92nd power of Reynolds number and the 0.33rd power of Schmidt number. The particle deposition rates are measured when 1,000 approx-lt Re approx-lt 2,000 suggest a transitional state for particle deposition which cannot be explained by the present analysis nor by the laminar pipe flow deposition theory

  17. Relative importance of nitrate and sulfate aerosol production mechanisms in urban atmospheres

    International Nuclear Information System (INIS)

    The relative importance of the various sulfate and nitrate aerosol production mechanisms is calculated for different atmospheric conditions. The calculation scheme used to determine the rates of nitrate and sulfate production, based on the concept that vapor transfer to the aerosols and nitrate and sulfate formation within the aerosols are coupled kinetic processes, considers sulfate formation by ozone and hydrogen peroxide oxidation and catalytic oxidation in the presence of soot, iron and manganese of sulfite solutions and sulfuric acid condensation and nitrate formation by the liquid-phase oxidation of dissolved nitrogen oxides for different initial gas concentrations and particle compositions and sizes. It is found that sulfate production is higher under daytime conditions, primarily proceeding by mechanisms involving sulfuric acid and hydrogen peroxide, while at night oxidation processes on the surface of the aerosol film are more important. Nitrate tends to decrease nighttime sulfate production due to an increase in aerosol acidity and nitrate production is found to be higher under nighttime conditions and in the winter

  18. The single scattering properties of the aerosol particles as aggregated spheres

    Science.gov (United States)

    Wu, Y.; Gu, X.; Cheng, T.; Xie, D.; Yu, T.; Chen, H.; Guo, J.

    2012-08-01

    The light scattering and absorption properties of anthropogenic aerosol particles such as soot aggregates are complicated in the temporal and spatial distribution, which introduce uncertainty of radiative forcing on global climate change. In order to study the single scattering properties of anthorpogenic aerosol particles, the structures of these aerosols such as soot paticles and soot-containing mixtures with the sulfate or organic matter, are simulated using the parallel diffusion limited aggregation algorithm (DLA) based on the transmission electron microscope images (TEM). Then, the single scattering properties of randomly oriented aerosols, such as scattering matrix, single scattering albedo (SSA), and asymmetry parameter (AP), are computed using the superposition T-matrix method. The comparisons of the single scattering properties of these specific types of clusters with different morphological and chemical factors such as fractal parameters, aspect ratio, monomer radius, mixture mode and refractive index, indicate that these different impact factors can respectively generate the significant influences on the single scattering properties of these aerosols. The results show that aspect ratio of circumscribed shape has relatively small effect on single scattering properties, for both differences of SSA and AP are less than 0.1. However, mixture modes of soot clusters with larger sulfate particles have remarkably important effects on the scattering and absorption properties of aggregated spheres, and SSA of those soot-containing mixtures are increased in proportion to the ratio of larger weakly absorbing attachments. Therefore, these complex aerosols come from man made pollution cannot be neglected in the aerosol retrievals. The study of the single scattering properties on these kinds of aggregated spheres is important and helpful in remote sensing observations and atmospheric radiation balance computations.

  19. The single scattering properties of the aerosol particles as aggregated spheres

    International Nuclear Information System (INIS)

    The light scattering and absorption properties of anthropogenic aerosol particles such as soot aggregates are complicated in the temporal and spatial distribution, which introduce uncertainty of radiative forcing on global climate change. In order to study the single scattering properties of anthorpogenic aerosol particles, the structures of these aerosols such as soot paticles and soot-containing mixtures with the sulfate or organic matter, are simulated using the parallel diffusion limited aggregation algorithm (DLA) based on the transmission electron microscope images (TEM). Then, the single scattering properties of randomly oriented aerosols, such as scattering matrix, single scattering albedo (SSA), and asymmetry parameter (AP), are computed using the superposition T-matrix method. The comparisons of the single scattering properties of these specific types of clusters with different morphological and chemical factors such as fractal parameters, aspect ratio, monomer radius, mixture mode and refractive index, indicate that these different impact factors can respectively generate the significant influences on the single scattering properties of these aerosols. The results show that aspect ratio of circumscribed shape has relatively small effect on single scattering properties, for both differences of SSA and AP are less than 0.1. However, mixture modes of soot clusters with larger sulfate particles have remarkably important effects on the scattering and absorption properties of aggregated spheres, and SSA of those soot-containing mixtures are increased in proportion to the ratio of larger weakly absorbing attachments. Therefore, these complex aerosols come from man made pollution cannot be neglected in the aerosol retrievals. The study of the single scattering properties on these kinds of aggregated spheres is important and helpful in remote sensing observations and atmospheric radiation balance computations.

  20. Reactivity of liquid and semisolid secondary organic carbon with chloride and nitrate in atmospheric aerosols.

    Science.gov (United States)

    Wang, Bingbing; O'Brien, Rachel E; Kelly, Stephen T; Shilling, John E; Moffet, Ryan C; Gilles, Mary K; Laskin, Alexander

    2015-05-14

    Constituents of secondary organic carbon (SOC) in atmospheric aerosols are often mixed with inorganic components and compose a significant mass fraction of fine particulate matter in the atmosphere. Interactions between SOC and other condensed-phase species are not well understood. Here, we investigate the reactions of liquid-like and semisolid SOC from ozonolysis of limonene (LSOC) and α-pinene (PSOC) with NaCl using a set of complementary microspectroscopic analyses. These reactions result in chloride depletion in the condensed phase, release of gaseous HCl, and formation of organic salts. The reactions attributed to acid displacement by SOC acidic components are driven by the high volatility of HCl. Similar reactions can take place in SOC/NaNO3 particles. The results show that an increase in SOC mass fraction in the internally mixed SOC/NaCl particles leads to higher chloride depletion. Glass transition temperatures and viscosity of PSOC were estimated for atmospherically relevant conditions. Data show that the reaction extent depends on SOC composition, particle phase state and viscosity, mixing state, temperature, relative humidity (RH), and reaction time. LSOC shows slightly higher potential to deplete chloride than PSOC. Higher particle viscosity at low temperatures and RH can hinder these acid displacement reactions. Formation of organic salts from these overlooked reactions can alter particle physiochemical properties and may affect their reactivity and ability to act as cloud condensation and ice nuclei. The release and potential recycling of HCl and HNO3 from reacted aerosol particles may have important implications for atmospheric chemistry. PMID:25386912

  1. Reactivity of liquid and semisolid secondary organic carbon with chloride and nitrate in atmospheric aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Bingbing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); O' Brien, Rachel E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of the Pacific, Stockton, CA (United States); Kelly, Stephen T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shilling, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Moffet, Ryan C. [Univ. of the Pacific, Stockton, CA (United States); Gilles, Mary K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Laskin, Alexander [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-05-14

    Constituents of secondary organic carbon (SOC) in atmospheric aerosols are often mixed with inorganic components and compose a significant mass fraction of fine particulate matter in the atmosphere. Interactions between SOC and other condensed-phase species are not well understood. Here, we investigate the reactions of liquid-like and semi-solid SOC from ozonolysis of limonene (LSOC) and α-pinene (PSOC) with NaCl using a set of complementary micro-spectroscopic analyses. These reactions result in chloride depletion in the condensed phase, release of gaseous HCl, and formation of organic salts. The reactions attributed to acid displacement by SOC acidic components are driven by the high volatility of HCl. Similar reactions can take place in SOC/NaNO₃ particles. The results show that an increase in SOC mass fraction in the internally mixed SOC/NaCl particles leads to higher chloride depletion. Glass transition temperatures and viscosity of PSOC were estimated for atmospherically relevant conditions. Data show that the reaction extent depends on SOC composition, particle phase state and viscosity, mixing state, temperature, relative humidity (RH), and reaction time. LSOC shows slightly higher potential to deplete chloride than PSOC. Higher particle viscosity at low temperatures and RH can hinder these acid displacement reactions. Formation of organic salts from these overlooked reactions can alter particle physiochemical properties and may affect their reactivity and ability to act as cloud condensation and ice nuclei. The release and potential recycling of HCl and HNO₃ from reacted aerosol particles may have important implications for atmospheric chemistry.

  2. MATRIX (Multiconfiguration Aerosol TRacker of mIXing state: an aerosol microphysical module for global atmospheric models

    Directory of Open Access Journals (Sweden)

    S. E. Bauer

    2008-05-01

    Full Text Available A new aerosol microphysical module MATRIX, the Multiconfiguation Aerosol TRacker of mIXing state, and its application in the Goddard Institute for Space Studies (GISS climate model (ModelE is described. This module, which is based on the quadrature method of moments (QMOM, represents nucleation, condensation, coagulation, internal and external mixing, and cloud-drop activation and provides aerosol particle mass and number concentration and particle size information for up to 16 mixed-mode aerosol populations. Internal and external mixing among aerosol components sulfate, nitrate, ammonium, carbonaceous aerosols, dust and sea-salt particles are represented. The solubility of each aerosol mode, which is explicitly calculated based on its soluble and insoluble components, enables calculation of the dependence of cloud drop activation on the microphysical characterization of multiple soluble modes. A detailed model description and results of box-model simulations of various mode configurations are presented. The number concentration of aerosol particles activated to cloud drops depends on the mode configuration. Simulations on the global scale with the GISS climate model are evaluated against aircraft and station measurements of aerosol mass and number concentration and particle size. The model accurately captures the observed size distributions in the aitken and accumulation modes up to particle diameter 1 μm, in which sulfate, nitrate, black and organic carbon are predominantly located; however the model underestimates coarse-mode number concentration and size, especially in the marine environment.

  3. Characterizing the impact of urban emissions on regional aerosol particles: airborne measurements during the MEGAPOLI experiment

    Science.gov (United States)

    Freney, E. J.; Sellegri, K.; Canonaco, F.; Colomb, A.; Borbon, A.; Michoud, V.; Doussin, J.-F.; Crumeyrolle, S.; Amarouche, N.; Pichon, J.-M.; Bourianne, T.; Gomes, L.; Prevot, A. S. H.; Beekmann, M.; Schwarzenböeck, A.

    2014-02-01

    The MEGAPOLI (Megacities: Emissions, urban, regional and Global Atmospheric POLlution and climate effects, and Integrated tools for assessment and mitigation) experiment took place in July 2009. The aim of this campaign was to study the aging and reactions of aerosol and gas-phase emissions in the city of Paris. Three ground-based measurement sites and several mobile platforms including instrument equipped vehicles and the ATR-42 aircraft were involved. We present here the variations in particle- and gas-phase species over the city of Paris, using a combination of high-time resolution measurements aboard the ATR-42 aircraft. Particle chemical composition was measured using a compact time-of-flight aerosol mass spectrometer (C-ToF-AMS), giving detailed information on the non-refractory submicron aerosol species. The mass concentration of black carbon (BC), measured by a particle absorption soot photometer (PSAP), was used as a marker to identify the urban pollution plume boundaries. Aerosol mass concentrations and composition were affected by air-mass history, with air masses that spent longest time over land having highest fractions of organic aerosol and higher total mass concentrations. The Paris plume is mainly composed of organic aerosol (OA), BC, and nitrate aerosol, as well as high concentrations of anthropogenic gas-phase species such as toluene, benzene, and NOx. Using BC and CO as tracers for air-mass dilution, we observe the ratio of ΔOA / ΔBC and ΔOA / ΔCO increase with increasing photochemical age (-log(NOx / NOy)). Plotting the equivalent ratios of different organic aerosol species (LV-OOA, SV-OOA, and HOA) illustrate that the increase in OA is a result of secondary organic aerosol (SOA) formation. Within Paris the changes in the ΔOA / ΔCO are similar to those observed during other studies in London, Mexico City, and in New England, USA. Using the measured SOA volatile organic compounds (VOCs) species together with organic aerosol formation

  4. Characterization of atmospheric aerosols in Ile-de-France: Local contribution and Long range transport

    International Nuclear Information System (INIS)

    Atmospheric aerosols interact directly in a great number of processes related to climate change and public health, modifying the energy budget and partly determining the quality of the air we breathe. In my PhD, I chose to study the perturbation, if not the aggravation, of the living conditions in Ile-de-France associated to aerosol transport episodes in the free troposphere. This situation is rather frequent and still badly known. To achieve my study, I developed the observation platform 'TReSS' Transportable Remote Sensing Station, whose instruments were developed at the Laboratoire de Meteorology Dynamique by the LiMAG team. 'TReSS' consists of a new high-performance 'Mini-Lidar' and of two standard radiometers: a sun photometer and a thermal infrared radiometer. The principle of my experimental approach is the synergy of the vertical Lidar profiles and the particle size distributions over the column, obtained by the 'Almucantar' inversion of sun photometer data. The new 'Lidar and Almucantar' method characterizes the vertical distribution by layer and the optical micro-physical properties of the local and transported aerosols. Firstly, I undertook the characterization of the Paris aerosol, mainly of anthropogenic origin. Their radiative properties were analyzed in the daily and yearly scales. Then, I conducted a statistical multi-year study of transport episodes and a two-week study case, representative of a succession of desert dust intrusion in Ile-de-France. My PhD work concludes by a study on the impact of biomass burning aerosols during the heat wave on August 2003. I study the impact of the transported aerosols into the local radiative budget and the possible consequences on the diurnal cycle of the atmospheric boundary layer. (author)

  5. Measurements of organic gases during aerosol formation events in the boreal forest atmosphere during QUEST

    Directory of Open Access Journals (Sweden)

    K. Sellegri

    2004-08-01

    Full Text Available Biogenic VOCs are important in the growth and possibly also in the formation of atmospheric aerosol particles. In this work, we present 10 min-time resolution measurements of organic trace gases at Hyytiälä, Finland during March 2002. The measurements were part of the project QUEST (Quantification of Aerosol Nucleation in the European Boundary Layer and took place during a two-week period when nucleation events occurred with various intensities nearly every day. Using a ground-based Chemical Ionization Mass Spectrometer (CIMS instrument, the following trace gases were detected: acetone, TMA, DMA, mass 68 amu (candidate=isoprene, monoterpenes, Methyl Vinyl Ketone (MVK and Methacrolein (MaCR, cis-3-hexenyl acetate and MonoTerpene Oxidation Products (MTOP. For all of them except for the amines, we present daily variations during different classes of event days, and non-event days. Isoprene, monoterpenes, MVK+MaCR, cis-3-hexenyl acetate and MTOP are found to show significant correlations with the condensational sink (CS, which indicates that a fraction of these compounds are participating to the growth of the nucleated particles and generally secondary organic aerosol formation. Moreover, the terpene oxidation products (TOP (MVK, MaCR and MTOP show a higher ratio to the CS on event days compared to non-event days, indicating that their abundance relative to the surface of aerosol available is higher on nucleation days.

  6. The effect of acid–base clustering and ions on the growth of atmospheric nano-particles

    OpenAIRE

    Lehtipalo, Katrianne; Rondo, Linda; Kontkanen, Jenni; Schobesberger, Siegfried; Jokinen, Tuija; Sarnela, Nina; Kürten, Andreas; Ehrhart, Sebastian; Franchin, Alessandro; Nieminen, Tuomo; Riccobono, Francesco; Sipilä, Mikko; Yli-Juuti, Taina; Duplissy, Jonathan; Adamov, Alexey

    2016-01-01

    The growth of freshly formed aerosol particles can be the bottleneck in their survival to cloud condensation nuclei. It is therefore crucial to understand how particles grow in the atmosphere. Insufficient experimental data has impeded a profound understanding of nano-particle growth under atmospheric conditions. Here we study nano-particle growth in the CLOUD (Cosmics Leaving OUtdoors Droplets) chamber, starting from the formation of molecular clusters. We present measured growth rates at su...

  7. A size-composition resolved aerosol model for simulating the dynamics of externally mixed particles: SCRAM (v 1.0)

    Science.gov (United States)

    Zhu, S.; Sartelet, K. N.; Seigneur, C.

    2015-06-01

    The Size-Composition Resolved Aerosol Model (SCRAM) for simulating the dynamics of externally mixed atmospheric particles is presented. This new model classifies aerosols by both composition and size, based on a comprehensive combination of all chemical species and their mass-fraction sections. All three main processes involved in aerosol dynamics (coagulation, condensation/evaporation and nucleation) are included. The model is first validated by comparison with a reference solution and with results of simulations using internally mixed particles. The degree of mixing of particles is investigated in a box model simulation using data representative of air pollution in Greater Paris. The relative influence on the mixing state of the different aerosol processes (condensation/evaporation, coagulation) and of the algorithm used to model condensation/evaporation (bulk equilibrium, dynamic) is studied.

  8. Mass-based hygroscopicity parameter interaction model and measurement of atmospheric aerosol water uptake

    Directory of Open Access Journals (Sweden)

    E. Mikhailov

    2013-01-01

    Full Text Available In this study we derive and apply a mass-based hygroscopicity parameter interaction model for efficient description of concentration-dependent water uptake by atmospheric aerosol particles with complex chemical composition. The model approach builds on the single hygroscopicity parameter model of Petters and Kreidenweis (2007. We introduce an observable mass-based hygroscopicity parameter κm which can be deconvoluted into a dilute hygroscopicity parameter (κm0 and additional self- and cross-interaction parameters describing non-ideal solution behavior and concentration dependencies of single- and multi-component systems.

    For reference aerosol samples of sodium chloride and ammonium sulfate, the κm-interaction model (KIM captures the experimentally observed concentration and humidity dependence of the hygroscopicity parameter and is in good agreement with an accurate reference model based on the Pitzer ion-interaction approach (Aerosol Inorganic Model, AIM. Experimental results for pure organic particles (malonic acid, levoglucosan and for mixed organic-inorganic particles (malonic acid – ammonium sulfate are also well reproduced by KIM, taking into account apparent or equilibrium solubilities for stepwise or gradual deliquescence and efflorescence transitions.

    The mixed organic-inorganic particles as well as atmospheric aerosol samples exhibit three distinctly different regimes of hygroscopicity: (I a quasi-eutonic deliquescence & efflorescence regime at low-humidity where substances are just partly dissolved and exist also in a non-dissolved phase, (II a gradual deliquescence & efflorescence regime at intermediate humidity where different solutes undergo gradual dissolution or solidification in the aqueous phase; and (III a dilute regime at high humidity where the solutes are fully dissolved approaching their dilute hygroscopicity.

    For atmospheric aerosol samples

  9. Heterogeneous Ice Nucleation on Kaolinite Particles, Particle Surrogates of HUmic-Like Substances (HULIS), and Organics-Containing Urban Aerosols

    Science.gov (United States)

    Wang, B.; Knopf, D. A.

    2009-12-01

    Aerosol particles can affect the global radiation budget through aerosol-cloud interactions by acting as cloud condensation nuclei and ice nuclei (IN) thereby inducing new clouds and/or modifying the radiative properties of existing clouds. This study presents heterogeneous ice nucleation data as a function of particle temperature and relative humidity with respect to ice (RHice) for laboratory generated kaolinite particles, leonardite and fulvic acid particles serving as surrogates for aerosols composed of HULIS, and organics-containing urban aerosols collected during the MILAGRO (Mexico City) campaign. These experiments are conducted using an improved version of a previously developed ice nucleation cell coupled to an optical microscope which allows to control particle temperatures between 200-300 K and corresponding atmospherically relevant RHice. Micrometer-sized particles are deposited onto a hydrophobic substrate and are placed in the nucleation cell. To validate the experimental approach and quality of substrates, ice nucleation experiments were performed 1. on plain sample substrates and 2. using a well studied IN: kaolinite particles. The results corroborate that kaolinite particles are efficient IN inducing ice nucleation at 102-120% RHice via deposition mode at temperatures between 200 and 245 K, in agreement with previous studies. The ice nucleation efficiency of leonardite and fulvic acid particles with median diameters of 2-3 µm is determined. Leonardite particles nucleate ice via deposition mode at 120-140% RHice for temperatures between 200 and 240 K with the minimum RHice threshold observed at 220 K. Fulvic acid particles nucleate ice via deposition mode at 135-150% RHice for temperatures between 200 and 230 K with the minimum RHice threshold determined at 216 K. The fulvic acid particles take up water at RH>95% for temperatures between 235 and 250 K. The contact angle derived from experimentally determined heterogeneous ice nucleation rate

  10. Radical loss in the atmosphere from Cu-Fe redox coupling in aerosols

    Directory of Open Access Journals (Sweden)

    J. Mao

    2013-01-01

    Full Text Available The hydroperoxyl radical (HO2 is a major precursor of OH and tropospheric ozone. OH is the main atmospheric oxidant, while tropospheric ozone is an important surface pollutant and greenhouse gas. Standard gas-phase models for atmospheric chemistry tend to overestimate observed HO2 concentrations, and this has been tentatively attributed to heterogeneous uptake by aerosol particles. It is generally assumed that HO2 uptake by aerosol involves conversion to H2O2, but this is of limited efficacy as an HO2 sink because H2O2 can photolyze to regenerate OH and from there HO2. Joint atmospheric observations of HO2 and H2O2 suggest that HO2 uptake by aerosols may in fact not produce H2O2. Here we propose a catalytic mechanism involving coupling of the transition metal ions Cu(I/Cu(II and Fe(II/Fe(III to rapidly convert HO2 to H2O in aqueous aerosols. The implied HO2 uptake and conversion to H2O significantly affects global model predictions of tropospheric OH, ozone, carbon monoxide (CO and other species, improving comparisons to observations in the GEOS-Chem model. It represents a previously unrecognized positive radiative forcing of aerosols through the effects on the chemical budgets of major greenhouse gases including methane and hydrofluorocarbons (HFCs.

  11. Uncertainty Analysis And Synergy Of Aerosol Products From Multiple Satellite Sensors For Advanced Atmospheric Research

    Science.gov (United States)

    Ichoku, C. M.; Petrenko, M.

    2013-05-01

    Aerosols are tiny particles suspended in the air, and can be made up of wind-blown dust, smoke from fires, and particulate emissions from automobiles, industries, and other natural and man-made sources. Aerosols can have significant impacts on the air quality, and can interact with clouds and solar radiation in such a way as to affect the water cycle and climate. However, the extent and scale of these impacts are still poorly understood, and this represents one of the greatest uncertainties in climate research to date. To fill this gap in our knowledge, the global and local properties of atmospheric aerosols are being extensively observed and measured, especially during the last decade, using both satellite and ground-based instruments, including such spaceborne sensors as MODIS on the Terra and Aqua satellites, MISR on Terra, OMI on Aura, POLDER on PARASOL, CALIOP on CALIPSO, SeaWiFS on SeaStar, and the ground-based Aerosol Robotic Network (AERONET) of sunphotometers. The aerosol measurements collected by these instruments over the last decade contribute to an unprecedented availability of the most complete set of complimentary aerosol measurements ever acquired. Still, to be able to utilize these measurements synergistically, they have to be carefully and uniformly analyzed and inter-compared, in order to understand the uncertainties and limitations of the products - a process that is greatly complicated by the diversity of differences that exist among them. In this presentation, we will show results of a coherent comparative uncertainty analysis of aerosol measurements from the above-named satellite sensors relative to AERONET. We use these results to demonstrate how these sensors perform in different parts of the world over different landcover types as well as their performance relative to one another, thereby facilitating product selection and integration for specific research and applications needs.

  12. Radiocarbon (14C) source apportionment of carbonaceous aerosol components in the Asian Atmospheric Brown Cloud

    International Nuclear Information System (INIS)

    Full text: Light-absorbing carbonaceous matter constitutes one of the largest uncertainties in climate modeling. The high concentrations of black carbon - soot - in the Asian Brown Cloud lead to strong atmospheric heating and large surface cooling that is as important to regional climate forcing as greenhouse gases, yet the sources of these aerosols are not well understood. Emission inventory models suggest that biofuel/biomass burning accounts for 60 - 90 % of the sources of these aerosol components whereas measurements of the elemental composition of ambient aerosols compared with source signatures point to combustion of fossil fuel as the primary culprit. However, both approaches acknowledge large uncertainties in source apportionment of the elusively defined black carbon. This study approached the sourcing challenge by applying microscale radiocarbon measurements to aerosol particles collected during the winter monsoon both over the Indian Ocean and in central India. The radiocarbon approach is ideally suited to this task as fossil sources are void of 14C whereas biomass combustion products hold a contemporary 14C signal. High-volume air samples of total carbonaceous aerosols revealed 14C signals that were similar for N. Indian source and Indian Ocean receptor regions, consistent with the absence of any significant formation of secondary organic aerosols, with a 60 - 70 % contribution from biomass combustion and biogenic sources. Isolates of elemental or soot carbon fractions varied between 40 - 70 %, depending on isolation method. These novel radiocarbon constraints on the sources of light-absorbing carbonaceous matter aid prioritizing of what combustion processes to target for emission mitigations of these health-afflicting and climate-forcing aerosols in the South Asian region. (author)

  13. Inorganic aerosol formation and growth in the Earth's lower and upper atmosphere

    Science.gov (United States)

    Saunders, R. W.; Plane, J. M. C.

    2006-12-01

    This chapter describes the photo-chemical production of aerosol particles in two very different regions of the atmosphere: iodine oxide particles in the marine boundary layer (MBL), and meteoric smoke particles that form in the upper mesosphere from the ablation of interplanetary dust. These two systems are surprisingly analogous the source of the condensable inorganic vapours is external to the atmosphere, being injected into the atmosphere from the ocean or from space and the particles are formed by homogeneous nucleation. The purpose of the chapter is to describe a laboratory and modelling study to understand at a fundamental level how the nucleation and growth of the particles occurs. Iodine oxide particles were produced from the photo-oxidation of gaseous I{2} with O{3}, which is most likely the primary photo-chemical route to produce the bursts of new particles observed in the MBL at seaweed-rich coastal locations. The captured particles were observed to be fractal-like (i.e., with open or non-compact structures), and to be composed of the stable oxide I{2}O{5}. Meteoric smoke analogues of iron oxide, silicon oxide, and iron silicate composition were similarly formed from the photo-oxidation of iron- and silicon-containing gas-phase precursors in the presence of O{3}. Imaging of the iron-containing particles showed them to be extended, fractal aggregates. For each system, models were developed to elucidate the growth kinetics of the particles and to characterise them in terms of standard fractal parameters. I{2}O{5} particles were found to have a fractal dimension (Df) value of 2.5 at long growth times, consistent with a particle-cluster diffusion-limited aggregation (DLA) mechanism, whereas smoke analogues had lower Df values (1.75) which appear to result from a magnetic aggregation process.

  14. PITEAS experiments: the growth of hygroscopic aerosol in humid atmosphere

    International Nuclear Information System (INIS)

    The PITEAS programme has been performed to study hygroscopic behaviour of cesium iodide particles under thermal-hydraulic conditions representative of a containment in case of a severe accident on a nuclear reactor. This papers presents results of one part of the programme, relative to steam condensation onto aerosol particles, increasing their settling rate. The experiments were carried on in a 3M3 facility, with a 3 bar pressure, 120' C temperature and up to 100 % relative humidity. Experimental results show that hygroscopicity of CsI particles increase their settling rate of a very significant manner above 90 % relative humidity. A comparison of experimental results with calculations, using a ratio of final to initial diameter from particle growth in isothermal conditions, leads to a good agreement. (Author)

  15. Use of Lead Isotopes to Identify Sources of Metal and Metalloid Contaminants in Atmospheric Aerosol from Mining Operations

    OpenAIRE

    Félix, Omar I.; Csavina, Janae; Field, Jason; Kyle P. Rine; Sáez, A. Eduardo; Betterton, Eric A.

    2014-01-01

    Mining operations are a potential source of metal and metalloid contamination by atmospheric particulate generated from smelting activities, as well as from erosion of mine tailings. In this work, we show how lead isotopes can be used for source apportionment of metal and metalloid contaminants from the site of an active copper mine. Analysis of atmospheric aerosol shows two distinct isotopic signatures: one prevalent in fine particles (< 1 μm aerodynamic diameter) while the other corresponds...

  16. Modeling Dry Deposition of Aerosol Particles on Rough Surfaces

    Czech Academy of Sciences Publication Activity Database

    Hussein, T.; Smolík, Jiří; Kerminen, V.-M.; Kulmala, M.

    2012-01-01

    Roč. 46, č. 1 (2012), s. 44-59. ISSN 0278-6826 Institutional research plan: CEZ:AV0Z40720504 Keywords : aerosol particles * dry deposition * transport Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.780, year: 2012

  17. Aerosol Particle Size Distributions at a Rural Coastal Site

    NARCIS (Netherlands)

    Leeuw, G. de; Vignati, E.

    1998-01-01

    Aerosol particle size distributions were measured on the Swedish island Ostergamsholm, about 3 km east of Gotland, from 26 April until 13 May, 1998. In this contribution preliminary results are presented of the dialysis of data collected at the south tip of the island at 10 m above sea level using a

  18. Mass Accomodation and Reactive uptake Coefficients for Nanoscale Aerosol Particles

    Czech Academy of Sciences Publication Activity Database

    Levdansky, V.V.; Smolík, Jiří; Ždímal, Vladimír; Moravec, Pavel

    - : -, 2013. ISBN N. [Research Workshop Nucleation Theory and Applications /17./. Dubna (RU), 01.04.2013-30.04.2013] R&D Projects: GA AV ČR IAA200760905 Institutional support: RVO:67985858 Keywords : aerosol particles * nanoscale * mass accommodation coefficient Subject RIV: CF - Physical ; Theoretical Chemistry

  19. Single particle analysis of the accumulation mode aerosol over the northeast Amazonian tropical rain forest, Surinam, South America

    Directory of Open Access Journals (Sweden)

    R. Krejci

    2005-01-01

    Full Text Available Single particle analysis of aerosols particles larger than 0.2 μm diameter was performed on 24 samples collected over Surinam tropical rain forest and in the adjacent marine boundary layer (MBL during the LBA-CLAIRE 98 campaign in March 1998. Elemental composition and morphology of 2308 particles was determined using SEM-EDX. The aerosol particles were divided into seven groups according to their chemical composition: organic particles, mineral dust, aged mineral dust, sea salt, aged sea salt, Ca-rich, and biogenic aerosol. However the organic material in aerosol particles cannot be identified directly by SEM-EDX, we present indirect method of detection of organic material using this technique. Samples were further divided with respect to the distinct atmospheric layers present in the tropical troposphere including MBL, continental mixed layer, cloud convective layer, free troposphere and region of deep convection outflow. The organic and mineral dust particles are two major groups observed over the rainforest. In the MBL also sea salt particles represented a large fraction between 15 and 27%. The organic particles control much of the chemical characteristic of the aerosol in the continental tropical troposphere. Their abundance ranged from less than 20% in the MBL to more than 90% in the free troposphere between 4.5- and 12.6-km altitude. During the transport of the air masses from the MBL over the rain forest, fraction of organic aerosol particles more than doubled, reaching 40–60% in the continental boundary layer. This increase was attributed to direct emissions of biogenic aerosols from the tropical vegetation. The high fraction of the organic accumulation mode particles in the upper tropical troposphere could be a good indicator for the air masses originated over the tropical rain forest.

  20. Production, Organic Characterization, and Phase Transformations of Marine Particles Aerosolized from a Laboratory Mesocosm Phytoplankton Bioreactor

    Science.gov (United States)

    Alpert, P. A.; Knopf, D. A.; Aller, J. Y.; Radway, J.; Kilthau, W.

    2012-12-01

    Previous studies have shown that particles emitted from bubble bursting and wave breaking of ocean waters with high biological activity can contain sea salts associated with organic material, with smaller particles containing a larger mass fraction of organics than larger particles. This likely indicates a link between phytoplankton productivity in oceans and particulate organic material in marine air. Once aerosolized, particles with significant amount of organic material can affect cloud activation and formation of ice crystals, among other atmospheric processes, thus influencing climate. This is significant for clouds and climate particularly over nutrient rich polar seas, in which concentrations of biological organisms can reach up to 109 cells per ml during spring phytoplankton blooms. Here we present results of bubble bursting aerosol production from a seawater mesocosm containing artificial seawater, natural seawater and unialgal cultures of three representative phytoplankton species. These phytoplankton (Thalassiosira pseudonana, Emilianaia huxleyi, and Nannochloris atomus), possessed siliceous frustules, calcareous frustules and no frustules, respectively. Bubbles were generated employing recirculating impinging water jets or glass frits. Dry and humidified aerosol size distributions and bulk aerosol organic composition were measured as a function of phytoplankton growth, and chlorophyll composition and particulate and dissolved organic carbon in the water were determined. Finally, particles were collected on substrates for ice nucleation and water uptake experiments, their elemental compositions were determined using computer controlled scanning electron microscopy and energy dispersive analysis of X-rays (CCSEMEDAX), and their carbon speciation was determined using scanning transmission X-ray microscopy and near-edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). Particle size distributions exposed to dry and humidified air employing

  1. Infrared Absorption by Atmospheric Aerosols in Mexico City during MILAGRO.

    Science.gov (United States)

    Kelley, K. L.; Mangu, A.; Gaffney, J. S.; Marley, N. A.

    2007-12-01

    found as colloidal materials in surface and groundwaters (4). Examples of the IR spectra obtained and variance as a function of time at the two sites will be presented. The spectra are taken in Kubelka - Munk format, which also allows the infrared absorption strengths to be evaluated as function of wavelength. The wavelength dependence of the aerosol complex refractive index (m = n + ik) in the infrared spectral region is determined by application of the Kramers Kronig function. The importance of the aerosol absorption in the infrared spectral region to radiative forcing will be discussed. 1. N.A. Marley, J.S. Gaffney, and M.M. Cunningham,Environ. Sci. Technol. 27 2864-2869 (1993). 2. N.A. Marley, J.S. Gaffney, and M.M. Cunningham, Spectroscopy 7 44-53 (1992). 3. J.S. Gaffney and N.A. Marley, Atmospheric Environment, New Directions contribution, 32, 2873-2874 (1998). 4. N.A. Marley, J.S. Gaffney, and K.A. Orlandini, Chapter 7 in Humic/Fulvic Acids and Organic Colloidal Materials in the Environment, ACS Symposium Series 651, American Chemical Society, Washington, D.C., pp. 96-107, 1996. This work was performed as part of the Department of Energy's Megacity Aerosol Experiment - Mexico City (MAX- Mex) under the support of the Atmospheric Science Program. This research was supported by the Office of Science (BER), U.S. Department of Energy, Grant No. DE-FG02-07ER64328.

  2. Enabling the identification, quantification, and characterization of organics in complex mixtures to understand atmospheric aerosols

    Science.gov (United States)

    Isaacman, Gabriel Avram

    Particles in the atmosphere are known to have negative health effects and important but highly uncertain impacts on global and regional climate. A majority of this particulate matter is formed through atmospheric oxidation of naturally and anthropogenically emitted gases to yield highly oxygenated secondary organic aerosol (SOA), an amalgamation of thousands of individual chemical compounds. However, comprehensive analysis of SOA composition has been stymied by its complexity and lack of available measurement techniques. In this work, novel instrumentation, analysis methods, and conceptual frameworks are introduced for chemically characterizing atmospherically relevant mixtures and ambient aerosols, providing a fundamentally new level of detailed knowledge on their structures, chemical properties, and identification of their components. This chemical information is used to gain insights into the formation, transformation and oxidation of organic aerosols. Biogenic and anthropogenic mixtures are observed in this work to yield incredible complexity upon oxidation, producing over 100 separable compounds from a single precursor. As a first step toward unraveling this complexity, a method was developed for measuring the polarity and volatility of individual compounds in a complex mixture using two-dimensional gas chromatography, which is demonstrated in Chapter 2 for describing the oxidation of SOA formed from a biogenic compound (longifolene: C15H24). Several major products and tens of substantial minor products were produced, but none could be identified by traditional methods or have ever been isolated and studied in the laboratory. A major realization of this work was that soft ionization mass spectrometry could be used to identify the molecular mass and formula of these unidentified compounds, a major step toward a comprehensive description of complex mixtures. This was achieved by coupling gas chromatography to high resolution time-of-flight mass spectrometry with

  3. UManSysProp: an online facility for molecular property prediction and atmospheric aerosol calculations

    Science.gov (United States)

    Topping, D.; Barley, M. H.; Bane, M.; Higham, N.; Aumont, B.; McFiggans, G.

    2015-11-01

    In this paper we describe the development and application of a new web based facility, UManSysProp (manchester.ac.uk"target="_blank">http://umansysprop.seaes.manchester.ac.uk), for automating predictions of molecular and atmospheric aerosol properties. Current facilities include: pure component vapour pressures, critical properties and sub-cooled densities of organic molecules; activity coefficient predictions for mixed inorganic-organic liquid systems; hygroscopic growth factors and CCN activation potential of mixed inorganic/organic aerosol particles; absorptive partitioning calculations with/without a treatment of non-ideality. The aim of this new facility is to provide a single point of reference for all properties relevant to atmospheric aerosol that have been checked for applicability to atmospheric compounds where possible. The group contribution approach allows users to upload molecular information in the form of SMILES strings and UManSysProp will automatically extract the relevant information for calculations. Built using open source chemical informatics, and hosted at the University of Manchester, the facilities are provided via a browser and device-friendly web-interface, or can be accessed using the user's own code via a JSON API. In this paper we demonstrate its use with specific examples that can be simulated using the web-browser interface.

  4. Simulating the evolution of soot mixing state with a particle-resolved aerosol model

    CERN Document Server

    Riemer, N; Zaveri, R A; Easter, R C

    2008-01-01

    The mixing state of soot particles in the atmosphere is of crucial importance for assessing their climatic impact, since it governs their chemical reactivity, cloud condensation nuclei activity and radiative properties. To improve the mixing state representation in models, we present a new approach, the stochastic particle-resolved model PartMC-MOSAIC, which explicitly resolves the composition of individual particles in a given population of different types of aerosol particles. This approach accurately tracks the evolution of the mixing state of particles due to emission, dilution, condensation and coagulation. To make this direct stochastic particle-based method practical, we implemented a new multiscale stochastic coagulation method. With this method we achieved optimal efficiency for applications when the coagulation kernel is highly non-uniform, as is the case for many realistic applications. PartMC-MOSAIC was applied to an idealized urban plume case representative of a large urban area to simulate the e...

  5. Aerosol predictions and their links to weather forecasts through online interactive atmospheric modeling and data assimilation

    Science.gov (United States)

    Saide Peralta, Pablo Enrique

    Atmospheric particles represent a component of air pollution that has been identified as a major contributor to adverse health effects and mortality. Aerosols also interact with solar radiation and clouds perturbing the atmosphere and generating responses in a wide range of scales, such as changes to severe weather and climate. Thus, being able to accurately predict aerosols and its effects on atmospheric properties is of upmost importance. This thesis presents a collection of studies with the global objective to advance in science and operations the use of WRF-Chem, a regional model able to provide weather and atmospheric chemistry predictions and simultaneously representing aerosol effects on climate. Different strategies are used to obtain accurate predictions, including finding an adequate model configuration for each application (e.g., grid resolution, parameterizations choices, processes modeled), using accurate forcing elements (e.g., weather and chemical boundary conditions, emissions), and developing and applying data assimilation techniques for different observational sources. Several environments and scales are simulated, including complex terrain at a city scale, meso-scale over the southeast US for severe weather applications, and regional simulations over the three subtropical persistent stratocumulus decks (off shore California and southeast Pacific and Atlantic) and over North America. Model performance is evaluated against a large spectrum of observations, including field experiments and ground based and satellite measurements. Overall, very positive results were obtained with the WRF-Chem system once it had been configured properly and the inputs chosen. Also, data assimilation of aerosol and cloud satellite observations contributed to improve model performance even further. The model is proven to be an excellent tool for forecasting applications, both for local and long range transported pollution. Also, advances are made to better understand

  6. Microstructure of atmospheric particles revealed by TXM and a new mode of influenza virus transmission

    Science.gov (United States)

    Bao, L. M.; Zhang, G. L.; Lei, Q. T.; Li, Y.; Li, X. L.; Hwu, Y. K.; Yi, J. M.

    2015-09-01

    For control of influenza, firstly it is important to find the real virus transmission media. Atmospheric aerosol particles are presumably one of the media. In this study, three typical atmospheric inhaled particles in Shanghai were studied by the synchrotron based transmission X-ray microscopes (TXM). Three dimensional microstructure of the particles reveals that there are many pores contained in, particularly the coal combustion fly particles which may be possible virus carrier. The particles can transport over long distance and cause long-range infections due to its light weight. We suggest a mode which is droplet combining with aerosol mode. By this mode the transmission of global and pandemic influenzas and infection between inland avian far from population and poultry or human living in cities along coast may be explained.

  7. Microstructure of atmospheric particles revealed by TXM and a new mode of influenza virus transmission

    International Nuclear Information System (INIS)

    For control of influenza, firstly it is important to find the real virus transmission media. Atmospheric aerosol particles are presumably one of the media. In this study, three typical atmospheric inhaled particles in Shanghai were studied by the synchrotron based transmission X-ray microscopes (TXM). Three dimensional microstructure of the particles reveals that there are many pores contained in, particularly the coal combustion fly particles which may be possible virus carrier. The particles can transport over long distance and cause long-range infections due to its light weight. We suggest a mode which is droplet combining with aerosol mode. By this mode the transmission of global and pandemic influenzas and infection between inland avian far from population and poultry or human living in cities along coast may be explained

  8. Microstructure of atmospheric particles revealed by TXM and a new mode of influenza virus transmission

    Energy Technology Data Exchange (ETDEWEB)

    Bao, L.M., E-mail: baoliangman@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhang, G.L., E-mail: zhangguilin@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Lei, Q.T.; Li, Y.; Li, X.L. [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Hwu, Y.K. [Institute of Physics, Academia Sinica, Taipei 11529, Taiwan (China); Yi, J.M. [Advanced Photon Source, Argonne National Laboratory, Argonne 60439 (United States)

    2015-09-15

    For control of influenza, firstly it is important to find the real virus transmission media. Atmospheric aerosol particles are presumably one of the media. In this study, three typical atmospheric inhaled particles in Shanghai were studied by the synchrotron based transmission X-ray microscopes (TXM). Three dimensional microstructure of the particles reveals that there are many pores contained in, particularly the coal combustion fly particles which may be possible virus carrier. The particles can transport over long distance and cause long-range infections due to its light weight. We suggest a mode which is droplet combining with aerosol mode. By this mode the transmission of global and pandemic influenzas and infection between inland avian far from population and poultry or human living in cities along coast may be explained.

  9. Laboratory studies of thin films representative of atmospheric sulfate aerosol

    Science.gov (United States)

    Fortin, Tara Jean

    Sulfate aerosols are present globally in both the upper troposphere and lower stratosphere. These aerosols are of great interest because they have a profound influence on Earth's radiation balance, heterogeneous chemistry, and cloud formation mechanisms throughout the atmosphere. The magnitude of these effects is ultimately determined by the size, phase, and chemical composition of the aerosols themselves. This thesis explores some of the questions that remain concerning the phase of these aerosols under atmospheric conditions and the effects of their chemical composition on heterogeneous chemistry and cloud formation mechanisms. In the upper troposphere, cirrus clouds are thought to form via the homogeneous nucleation of ice out of dilute sulfate aerosols such as ammonium sulfate ((NH4)2SO4). To investigate this, the low-temperature phase behavior of ammonium sulfate films has been studied using Fourier transform infrared (FTIR) spectroscopy. Experiments performed as a function of increasing relative humidity demonstrate that a phase transition from crystalline (NH 4)2SO4 to a metastable aqueous solution can occur at temperatures below the eutectic at 254 K. However, on occasion, direct deposition of ice from the vapor phase was observed, possibly indicating selective heterogeneous nucleation. In addition to serving as nuclei for cirrus clouds, sulfate aerosols can participate in heterogeneous reactions. The interaction of HNO3 with ammonium sulfate has been investigated as a possible loss mechanism for gas-phase HNO3 using a Knudsen cell reactor coupled with transmission FTIR spectroscopy. The results show that HNO3 reacts with solid ammonium sulfate to produce ammonium nitrate and letovicite at 203 K. Furthermore, this reaction is enhanced as a function of relative humidity from 0 to 41%. In the lower stratosphere, polar stratospheric clouds (PSCs) are important for springtime ozone depletion. The vapor deposition of ice on sulfuric acid tetrahydrate (SAT) has

  10. Chemical Composition of Organic Aerosol Particles over the Remote Ocean

    Science.gov (United States)

    Russell, L. M.; Frossard, A. A.; Keene, W. C.; Kieber, D. J.; Quinn, P.; Bates, T. S.

    2012-12-01

    Marine aerosol particles play an important role in Earth's radiative balance, yet the composition of the organic fraction of these important particles remains largely unconstrained. The composition of marine aerosol particles was measured in remote marine regions on board the R/V Atlantis during the CalNex 2010 campaign in May and June 2010, on board the R/V Point Sur during the E-PEACE campaign in July 2011, and on board the R/V Ronald Brown during the WACS campaign in August 2012. To understand the factors that control this composition, we compared the organic components of these particles to models of primary marine aerosol - i.e. those generated from bubbled and atomized seawater. The organic chemical composition was characterized by Fourier Transform Infrared (FTIR) spectroscopy to determine the functional group composition and high resolution time of flight aerosol mass spectrometer (HR-ToF-AMS) to identify characteristic mass fragments. Cluster analysis of FTIR organic spectra was used to identify different spectral signatures associated with location, seawater composition, and ambient conditions. Typical submicron organic mass (OM) concentrations were less than 0.80 μg m-3. The overall organic compositions of marine aerosol particles and generated seawater models were similar, with large fractions of organic hydroxyl functional groups in each. One cluster of FTIR spectra from the eastern Pacific showed the highest fraction of hydroxyl functional groups (77%) occurred during periods of high chlorophyll concentrations and high wind speeds (more than 10 m s-1). Detailed spectral comparisons revealed unique minor features that may be driven both by meteorology and regional differences in seawater composition for these and past studies.

  11. Particle Characterization and Ice Nucleation Efficiency of Field-Collected Aerosol Particles

    Science.gov (United States)

    Wang, B.; Gilles, M. K.; Laskin, A.; Moffet, R.; Nizkorodov, S.; Roedel, T.; Sterckx, L.; Tivanski, A.; Knopf, D. A.

    2011-12-01

    Atmospheric ice formation by heterogeneous nucleation is one of the least understood processes resulting in cirrus and mixed-phase clouds which affect the global radiation budget, the hydrological cycle, and water vapor distribution. In particular, how organic aerosol affect ice nucleation is not well understood. Here we report on heterogeneous ice nucleation from particles collected during the CalNex campaign at the Caltech campus site, Pasadena, on May 19, 2010 at 6am-12pm (A2) and 12pm-6pm (A3) and May 23 at 6am-12pm (B2) and 6pm-12am (B4). The ice nucleation onsets and water uptake were determined as a function of temperature (200-273 K) and relative humidity with respect to ice (RHice). The ice nucleation efficiency was related to the particle chemical composition. Single particle characterization was provided by using computer controlled scanning electron microscopy with energy dispersive analysis of X-rays (CCSEM/EDX) and scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). The STXM/NEXAFS analysis indicates that the morning sample (A2) constitutes organic particles and organic particles with soot and inorganic inclusions. The afternoon sample (A3) is dominated by organic particles with a potentially higher degree of oxidation associated with soot. The B2 sample shows a higher number fraction of magnesium-containing particle indicative of a marine source and ~93% of the particles contained sulfur besides oxygen and carbon as derived from CCSEM/EDX analysis. The B4 sample lacks the strong marine influence and shows higher organic content. Above 230 K, we observed water uptake followed by condensation freezing at mean RH of 93-100% and 89-95% for A2 and A3, respectively. This indicates that the aged A3 particles are efficient ice nuclei (IN) for condensation freezing. Below 230 K A2 and A3 induced deposition ice nucleation between 125-155% RHice (at mean values of 134-150% RHice). The B2 and B4

  12. MADE-in: a new aerosol microphysics submodel for global simulation of insoluble particles and their mixing state

    Directory of Open Access Journals (Sweden)

    V. Aquila

    2011-04-01

    Full Text Available Black carbon (BC and mineral dust are among the most abundant insoluble aerosol components in the atmosphere. When released, most BC and dust particles are externally mixed with other aerosol species. Through coagulation with particles containing soluble material and condensation of gases, the externally mixed particles may obtain a liquid coating and be transferred into an internal mixture. The mixing state of BC and dust aerosol particles influences their radiative and hygroscopic properties, as well as their ability of forming ice crystals.

    We introduce the new aerosol microphysics submodel MADE-in, implemented within the ECHAM/MESSy Atmospheric Chemistry global model (EMAC. MADE-in is able to track mass and number concentrations of BC and dust particles in their different mixing states, as well as particles free of BC and dust. MADE-in describes these three classes of particles through a superposition of seven log-normally distributed modes, and predicts the evolution of their size distribution and chemical composition. Six out of the seven modes are mutually interacting, allowing for the transfer of mass and number among them. Separate modes for the different mixing states of BC and dust particles in EMAC/MADE-in allow for explicit simulations of the relevant aging processes, i.e. condensation, coagulation and cloud processing. EMAC/MADE-in has been evaluated with surface and airborne measurements and mostly performs well both in the planetary boundary layer and in the upper troposphere and lowermost stratosphere.

  13. Optical and microphysical properties of atmospheric aerosols in Moldova

    Science.gov (United States)

    Aculinin, Alexandr; Smicov, Vladimir

    2010-05-01

    Measurements of aerosol properties in Kishinev, Moldova are being carried out within the framework of the international AERONET program managed by NASA/GSFC since 1999. Direct solar and sky diffuse radiances are measured by using of sunphotometer Cimel-318. Aerosol optical properties are retrieved from measured radiances by using of smart computational procedures developed by the AERONET's team. The instrument is situated at the ground-based solar radiation monitoring station giving the opportunity to make simultaneous spectral (win sunphotometer) and broadband (with the set of sensors from radiometric complex) solar radiation. Detailed description of the station and investigations in progress can be found at the http://arg.phys.asm.md. Ground station is placed in an urban environment of Kishinev city (47.00N; 28.56E; 205 m a.s.l). Summary of aerosol optical and microphysical properties retrieved from direct solar and diffuse sky radiance observations at Moldova site from September 1999 to June 2009 are presented below. Number of measurements (total): 1695 Number of measurements (for ?o, n, k): 223 Range of aerosol optical depth (AOD) @440 nm: 0.03 =0.25 Range of Ångström parameter : 0.14 (440/670/870/1020): 0.93/0.92/0.90/0.89 ±0.04 Parameters of volume particle size distribution function: (fine mode) volume median radius r v,f , μm: 0.17 ± 0.06 particle volume concentration Cv,f, μm3/μm2: 0.04 ± 0.03 (coarse mode) volume median radius rv,c , μm: 3.08 ± 0.64 particle volume concentration Cv,c, μm3/μm2: 0.03 ± 0.03 Climatic norms of AOD@500 nm and Ångström parameter at the site of observation are equal to 0.21 ± 0.06 and 1.45 ± 0.14, respectively. The aerosol type in Moldova may be considered as 'urban-industrial and mixed' in accordance with the classification of aerosol type models systematized and developed by AERONET team (O.Dubovik et al., 2002, J. Atmosph. Sci., 59, 590-608) on the basis of datasets acquired from worldwide observations at the

  14. Comparative study of ultrafine atmospheric aerosol within a city

    Science.gov (United States)

    Salma, I.; Borsós, T.; Németh, Z.; Weidinger, T.; Aalto, P.; Kulmala, M.

    2014-08-01

    Particle number size distributions in a mobility diameter range of 6-1000 nm and size-resolved number concentrations were determined with a time resolution of 10 min for a near-city background, city centre, street canyon and road tunnel environments in Budapest. Median N6-100 concentrations for the sites listed were 3.1 × 103, 9.3 × 103, 19.4 × 103 and 123 × 103 cm-3, respectively. Contributions of the ultrafine (UF) particles (urban sites, and for workdays and weekends. Nucleation strength factor (NSF) was introduced for the first time to quantify the relative importance of new particle formation with respect to all sources of UF particles. During the daytime in summer, nucleation in the near-city background was a major production process of UF particles with a daily mean relative contribution of 42%. In the city centre and street canyon, the daily mean relative contributions of nucleation to the UF particles were 30% and 23%, respectively. Median particle diameters for the background, city centre, street canyon and road tunnel environments were 61, 42, 35 and 42 nm, respectively, so they were jointly influenced with the anthropogenic impact and aerosol ageing. Monthly mean frequency of new particle formation and growth events in the background seems somewhat larger, while it appears smaller for the street canyon in comparison to the city centre.

  15. Quantifying the kinetic limitations of atmospheric gas-to-particle conversion

    Science.gov (United States)

    Booth, A.; Murphy, B.; Riipinen, I.; Percival, C.; Topping, D. O.

    2013-12-01

    Atmospheric aerosol particles, from anthropogenic and biogenic sources, remain a major uncertainty in the Earth system: they impact the climate by directly scattering and absorbing solar radiation, as well as regulating the properties of clouds. On regional scales, aerosols are among the main pollutants deteriorating air quality, their impacts on both poorly quantified. Reducing these uncertainties requires accurate knowledge on the composition, concentrations and size distributions of these particles as they reside in the atmosphere. Unfortunately, there are currently huge uncertainties in many fundamental parameters that are required to predict their environmental impacts. This is largely down to the fact that a significant fraction of atmospheric aerosol particles are comprised of organic material (20-90% of particle mass), containing potentially thousands of compounds with largely uncertain properties It is becoming increasingly evident that aerosols exist as metastable amorphous states, rather than simple liquid/solid mixtures. Empirical evidence suggests that particles can form glass like substances. As the glass transition temperature is approached, an increase in viscosity leads to a reduced rate of molecular diffusion and an arrested non-equilibrium structure. Partitioning between the gas and condensed phase is kinetically limited in such amorphous states. Traditional organic aerosol models do not account for this, they assume that 1) the aerosol phase is a well-mixed non-viscous liquid; 2) the aerosol phase instantaneously equilibrates with the gas phase constituents. This adds significant uncertainty to predictions of gas/particle mass transfer as mixing timescales are ultimately governed by the diffusion coefficients of the aerosol constituents in the aerosol, which, on the other hand, are connected to the viscosity of the particulate matter. For typical aerosol sizes, the characteristic time for mixing could increase from a few milliseconds to hours or

  16. A role of aerosol particles in forming urban skyglow and skyglow from distant cities

    Science.gov (United States)

    Kocifaj, Miroslav; Kómar, Ladislav

    2016-05-01

    Aerosol particles may represent the largest uncertainty about skyglow change in many locations under clear-sky conditions. This is because aerosols are ubiquitous in the atmosphere and influence the ground-reaching radiation in different ways depending on their concentrations, origins, shapes, sizes, and compositions. Large particles tend to scatter in Fraunhofer diffraction regime, while small particles can be treated in terms of Rayleigh formalism. However, the role of particle microphysics in forming the skyglow still remains poorly quantified. We have shown in this paper that the chemistry is somehow important for backscattering from large particles that otherwise work as efficient attenuators of light pollution if composed of absorbing materials. The contribution of large particles to the urban skyglow diminishes as they become more spherical in shape. The intensity of backscattering from non-absorbing particles is more-or-less linearly decreasing function of particle radius even if number size distribution is inversely proportional to the fourth power of particle radius. This is due to single particle backscattering that generally increases steeply as the particle radius approaches large values. Forward scattering depends on the particle shape but is independent of the material composition, thus allowing for a simplistic analytical model of skyglow from distant cities. The model we have developed is based on mean value theorem for integrals and incorporates the parametrizable Garstang's emission pattern, intensity decay along optical beam path, and near-forward scattering in an atmospheric environment. Such model can be used by modellers and experimentalists for rapid estimation of skyglow from distant light sources.

  17. Dust particle dynamics in atmospheric dust devils

    Science.gov (United States)

    Izvekova, Yulia; Popel, Sergey

    2016-04-01

    Dust particle dynamics is modeled in the Dust Devils (DDs). DD is a strong, well-formed, and relatively long-lived whirlwind, ranging from small (half a meter wide and a few meters tall) to large (more than 100 meters wide and more than 1000 meters tall) in Earth's atmosphere. We develop methods for the description of dust particle charging in DDs, discuss the ionization processes in DDs, and model charged dust particle motion. Our conclusions are consistent with the fact that DD can lift a big amount of dust from the surface of a planet into its atmosphere. On the basis of the model we perform calculations and show that DDs are important mechanism for dust uplift in the atmospheres of Earth and Mars. Influence of DD electric field on dynamics of dust particles is investigated. It is shown that influence of the electric field on dust particles trajectories is significant near the ground. At some altitude (more then a quarter of the height of DD) influence of the electric field on dust particles trajectories is negligible. For the calculation of the dynamics of dust electric field can be approximated by effective dipole located at a half of the height of DD. This work was supported by the Russian Federation Presidential Program for State Support of Young Scientists (project no. MK-6935.2015.2).

  18. Characteristics and composition of atmospheric aerosols in Phimai, central Thailand during BASE-ASIA

    Science.gov (United States)

    Li, Can; Tsay, Si-Chee; Hsu, N. Christina; Kim, Jin Young; Howell, Steven G.; Huebert, Barry J.; Ji, Qiang; Jeong, Myeong-Jae; Wang, Sheng-Hsiang; Hansell, Richard A.; Bell, Shaun W.

    2013-10-01

    Comprehensive measurements of atmospheric aerosols were made in Phimai, central Thailand (15.183°N, 102.565°E, elevation: 206 m) during the BASE-ASIA field experiment from late February to early May in 2006. The observed aerosol loading was sizable for this rural site (mean aerosol scattering: 108 ± 64 Mm-1; absorption: 15 ± 8 Mm-1; PM10 concentration: 33 ± 17 μg m-3), and dominated by submicron particles. Major aerosol compounds included carbonaceous (OC: 9.5 ± 3.6 μg m-3; EC: 2.0 ± 2.3 μg m-3) and secondary species (SO42-: 6.4 ± 3.7 μg m-3, NH4+: 2.2 ± 1.3 μg m-3). While the site was seldom under the direct influence of large forest fires to its north, agricultural fires were ubiquitous during the experiment, as suggested by the substantial concentration of K+ (0.56 ± 0.33 μg m-3). Besides biomass burning, aerosols in Phimai during the experiment were also strongly influenced by industrial and vehicular emissions from the Bangkok metropolitan region and long-range transport from southern China. High humidity played an important role in determining the aerosol composition and properties in the region. Sulfate was primarily formed via aqueous phase reactions, and hygroscopic growth could enhance the aerosol light scattering by up to 60%, at the typical morning RH level of 85%. The aerosol single scattering albedo demonstrated distinct diurnal variation, ranging from 0.86 ± 0.04 in the evening to 0.92 ± 0.02 in the morning. This experiment marks the first time such comprehensive characterization of aerosols was made for rural central Thailand. Our results indicate that aerosol pollution has developed into a regional problem for northern Indochina, and may become more severe as the region's population and economy continue to grow.

  19. Visualizing aerosol-particle injection for diffractive-imaging experiments

    CERN Document Server

    Awel, Salah; Eckerskorn, Niko; Wiedorn, Max; Horke, Daniel A; Rode, Andrei V; Küpper, Jochen; Chapman, Henry N

    2015-01-01

    Delivering sub-micrometer particles to an intense x-ray focus is a crucial aspect of single-particle diffractive-imaging experiments at x-ray free-electron lasers. Enabling direct visualization of sub-micrometer aerosol particle streams without interfering with the operation of the particle injector can greatly improve the overall efficiency of single-particle imaging experiments by reducing the amount of time and sample consumed during measurements. We have developed in-situ non-destructive imaging diagnostics to aid real-time particle injector optimization and x-ray/particle-beam alignment, based on laser illumination schemes and fast imaging detectors. Our diagnostics are constructed to provide a non-invasive rapid feedback on injector performance during measurements, and have been demonstrated during diffraction measurements at the FLASH free-electron laser.

  20. Changes in atmospheric aerosol loading retrieved from space-based measurements during the past decade

    OpenAIRE

    Yoon, J.; Burrows, J.P.; M. Vountas; W. von Hoyningen-Huene; Chang, D Y; Richter, A; A. Hilboll

    2014-01-01

    The role and potential management of short-lived atmospheric pollutants such as aerosols are currently a topic of scientific and public debates. Our limited knowledge of atmospheric aerosol and its influence on the Earth's radiation balance has a significant impact on the accuracy and error of current predictions of future climate change. In the last few years, there have been several accounts of the changes in atmospheric aerosol derived from satellite observations, but no ...

  1. Tropospheric aerosol scattering and absorption over Central Europe: a closure study for the dry particle state

    Directory of Open Access Journals (Sweden)

    N. Ma

    2013-10-01

    Full Text Available This work analyses optical properties of the dry tropospheric aerosol measured at the regional GAW observation site Melpitz in East Germany. For a continuous observation period between 2007 and 2010, we provide representative values of the dry-state scattering coefficient, the hemispheric backscattering coefficient, the absorption coefficient, single scattering albedo, and the Ångström exponent. Besides the direct measurement, the aerosol scattering coefficient was alternatively computed from experimental particle number size distributions using a Mie code. Within pre-defined limits, a closure could be achieved with the direct measurement. The achievement of closure implies that such calculations can be used as a high-level quality control measure for data sets involving multiple instrumentation. All dry optical properties showed significant annual variations, which were attributed to corresponding variations in the regional emission fluxes, the intensity of secondary particle formation, and the mixed layer height. Air mass classification showed that atmospheric stability is a major factor influencing the dry aerosol properties at the GAW station. In the cold season, temperature inversions limit the volume available for atmospheric mixing, so that the aerosol optical properties near the ground proved quite sensitive to the geographical origin of the air mass. In the warm season, when the atmosphere is usually well-mixed during day-time, considerably less variability was observed for the optical properties between different air masses. This work provides, on the basis of quality-checked in-situ measurements, a first step towards a climatological assessment of direct aerosol radiative forcing in the region under study.

  2. Ozone and secondary aerosol formation — Analysis of particle observations in the 2009 SHARP campaign

    Science.gov (United States)

    Cowin, J.; Yu, X.; Laulainen, N.; Iedema, M.; Lefer, B. L.; Anderson, D.; Pernia, D.; Flynn, J. H.

    2010-12-01

    Particulate matters (PM) play important roles in the formation and transformation of ozone. Although photooxidation of volatile organic compounds with respect to ozone formation in the gas phase is well understood, many unknowns still exist in heterogeneous mechanisms that process soot, secondary aerosols (both inorganic and organic), and key radical precursors such as formaldehyde and nitrous acid. Our main objective is to answer two key science questions: 1) will reduction of fine PM reduce ozone formation? 2) What sources of PM are most culpable? Are they from local chemistry or long-range transport? The field data collected in the 2009 Study of Houston Atmospheric Radical Precursors (SHARP) by our group at the Moody Tower consist of 1) real-time photolysis rates of ozone precursors, 2) particle size distributions, 3) organic carbon and elemental carbon, and 4) an archive of single particle samples taken with the Time Resolved Aerosol Collector (TRAC) sampler. The time resolution of the TRAC sampler is 30 minutes for routine measurements, and 15 minutes during some identified “events” (usually in the mid-afternoon) of high ozone and secondary organic or sulfate particle formation. The latter events last typically about an hour. Five ozone exceedance days occurred during the 6 weeks of deployment. Strong correlation between photochemical activities and organic carbon was observed. Initial data analysis indicates that secondary organic aerosol is a major component of the carbonaceous aerosols observed in Houston. Soot, secondary sulfate, seal salt, and mineral dust particles are determined from single particle analysis using scanning electron microscope and transmission electron microcopy coupled with energy dispersive X-ray spectroscopy. Compared with observations in 2000, the mass percentage of organics is higher (60 vs. 30%), and lower for sulfate (20% vs. 32%). On-going data analysis will focus on the composition, sources, and transformation of primary and

  3. In-situ observations of interstitial aerosol particles and cloud residues found in contrails

    Energy Technology Data Exchange (ETDEWEB)

    Stroem, J. [Stockholm Univ. (Sweden). Dept. of Meteorology

    1997-12-31

    In spring 1994 a series of flights were conducted in cirrus clouds and contrails over southern Germany. One of the aims of this campaign was to study the phase partitioning of aerosols and water in these clouds. To achieve this separation of particles two complementary sampling probes were mounted on the research aircraft Falcon. These are the Counterflow Virtual Impactor (CVI) or super-micrometer inlet, and the interstitial inlet or submicrometer inlet. The CVI is a device that inertially separates cloud elements larger than a certain aerodynamic size from the surrounding atmosphere into a warm, dry and particle free air. Assuming that each cloud element leaves behind only one residue particle, these measurements yield an equivalent number concentration for cloud particles having an aerodynamic diameter larger than the lower cut size of the CVI. The size distribution of the sampled aerosol and residual particles between 0.1 to 3.5 {mu}m diameter was measured by a PMS PCASP (Passive Cavity Aerosol Spectrometer) working alternatively on both inlets. The gas-phase water vapor content was measured by a cryogenic frost point mirror. (R.P.) 4 refs.

  4. Anomalous telephotometer results for the ambient atmospheric aerosol

    Science.gov (United States)

    Harrison, A. W.; Coombes, C. A.

    Simultaneous measurements of the ambient atmospheric aerosol scattering coefficient using a telephotometer δa( λ) and an integrating nephelometer δn( λ) have revealed a seasonal variation in the difference δn( λ) - δa( λ). This variation can be explained by the presence of terpene oil droplets in the boundary layer in the telephotometer line of sight but beyond the telephotometer target. The droplets are due to extensive fir and pine in that far region. A satisfactory modification of the original Koschmeider contrast theory to take account of this effect is outlined.

  5. Desert dust in rural western US; the influence of dust storms, large particles, and land-use change on aerosol loads

    Science.gov (United States)

    Parks, D.; MacDonald, A. E.; Rosen, R. D.; Edmonds, H. N.; Key, E.; Swanberg, N.; Wiseman, W. J.; Sandgathe, S. A.; Neff, J. C.; Fernandez, D.; Munson, S.; Reynolds, R. L.

    2011-12-01

    Atmospheric aerosols are common in urban settings as well as dryland rural environments and are important to both climate and biogeochemical cycling. Most urban and far traveled aerosols are less than 10 micrometers in diameter with many particles in the less than 2.5 or 1 micrometer-size classes. Small aerosols, including many generated by industrial activity, are the focus of federal environmental law and have a major impact on human health. In rural areas of the western US, however, these small industrially derived particles appear to make up a small part of the overall aerosol load. Rather, dust in the rural West is dominated by mineral aerosols including a large amount of particles that range in size from 10 to 40 microns. These particles can travel for hundreds of kilometers, particularly during periods when dust storms are common. In the dusty spring and summer periods in and around Canyonlands and Mesa Verde National Parks, large particles (particles greater than 10 micrometers in diameter) appear to contribute between 50 and 90% to the overall particle load several meters above the ground. During large dust storms, concentrations of total suspended particulates increase by a factor of 8 to 10 while particles less than 10 micrometers in diameter are minimally affected. The presence of large particles in the atmosphere of the rural West is notable for several reasons. First, the majority of the existing aerosol monitoring networks focus on the small particle-size classes of less than 2.5 and 10 microns. Because many aerosol-collection instruments are designed with specific particle-size cutoff criteria, these instruments and the networks that depend on them are effectively blind to the larger particles that can dominate aerosol loads in the West. Second, for large portions of the year including the spring and summer months when dust storms are common, large particles likely play a major role in visibility restrictions across the protected airsheds of the

  6. Particle diffusion in atmospheres of CP stars

    OpenAIRE

    Aret, A.; Sapar, A.

    1998-01-01

    We give concisely the formulae governing diffusion of chemical elements and their isotopes in quiescent stellar atmospheres, due to electrostatic, gravitational and radiation fields and to impacts between particles. Isotope segregation of heavy elements due to light-induced drift is emphasized.

  7. Endotoxin in Size-Separated Metal Working Fluid Aerosol Particles.

    Science.gov (United States)

    Dahlman-Höglund, Anna; Lindgren, Åsa; Mattsby-Baltzer, Inger

    2016-08-01

    Patients with airway symptoms working in metal working industries are increasing, despite efforts to improve the environmental air surrounding the machines. Our aim was to analyse the amount of endotoxin in size-separated airborne particles of metal working fluid (MWF) aerosol, by using the personal sampler Sioutas cascade impactor, to compare filter types, and to compare the concentration of airborne endotoxin to that of the corresponding MWFs. In a pilot field study, aerosols were collected in two separate machine halls on totally 10 occasions, using glass fibre and polytetrafluoroethylene (PTFE) filters in parallel at each station. Airborne endotoxin was distributed over all size fractions. While a major part was found in the largest size fraction (72%, 2.5-10 µm), up to 8% of the airborne endotoxin was detected in the smallest size fraction (efficiency of the filter types, a significantly higher median endotoxin level was found with glass fibres filters collecting the largest particle-size fraction (1.2-fold) and with PTFE filters collecting the smallest ones (5-fold). The levels of endotoxin in the size-separated airborne particle fractions correlated to those of the MWFs supporting the aerosol-generating machines. Our study indicates that a significant part of inhalable aerosols of MWFs consists of endotoxin-containing particles below the size of intact bacteria, and thus small enough to readily reach the deepest part of the lung. Combined with other chemical irritants of the MWF, exposure to MWF aerosols containing endotoxin pose a risk to respiratory health problems. PMID:27268595

  8. Atmospheric aerosol brown carbon in the high Himalayas

    Science.gov (United States)

    Kirillova, Elena; Decesari, Stefano; Marinoni, Angela; Bonasoni, Paolo; Vuillermoz, Elisa; Facchini, M. Cristina; Fuzzi, Sandro

    2016-04-01

    Anthropogenic light-absorbing atmospheric aerosol can reach very high concentrations in the planetary boundary layer in South-East Asia ("brown clouds"), affecting atmospheric transparency and generating spatial gradients of temperature over land with a possible impact on atmospheric dynamics and monsoon circulation. Besides black carbon (BC), an important light-absorbing component of anthropogenic aerosols is the organic carbon component known as 'brown carbon' (BrC). In this research, we provided first measurements of atmospheric aerosol BrC in the high Himalayas during different seasons. Aerosol sampling was conducted at the GAW-WMO Global station "Nepal Climate Observatory-Pyramid" (NCO-P) located in the high Khumbu valley at 5079 m a.s.l. in the foothills of Mt. Everest. PM10 aerosol samples were collected from July 2013 to November 2014. The sampling strategy was set up in order to discriminate the daytime valley breeze bringing polluted air masses up to the observatory and free tropospheric air during nighttime. Water-soluble BrC (WS-BrC) and methanol-soluble BrC (MeS-BrC) were extracted and analyzed using a UV/VIS spectrophotometer equipped with a 50 cm liquid waveguide capillary cell. In the polluted air masses, the highest levels of the BrC light absorption coefficient at 365 nm (babs365) were observed during the pre-monsoon season (1.83±1.46 Mm‑1 for WS-BrC and 2.86±2.49 Mm‑1 for MeS-BrC) and the lowest during the monsoon season (0.21±0.22 Mm‑1 for WS-BrC and 0.32±0.29 Mm‑1 for MeS-BrC). The pre-monsoon season is the most frequently influenced by a strong atmospheric brown cloud (ABC) transport to NCO-P due to increased convection and mixing layer height over South Asia combined with the highest up-valley wind speed and the increase of the emissions from open fires due to the agricultural practice along the Himalayas foothills and the Indo-Gangetic Plain. In contrast, the monsoon season is characterized by a weakened valley wind regime and an

  9. Composition and sources of organic tracers in aerosol particles of industrial central India

    Science.gov (United States)

    Giri, Basant; Patel, Khageshwar S.; Jaiswal, Nitin K.; Sharma, Saroj; Ambade, Balram; Wang, Wentao; Simonich, Staci L. Massey; Simoneit, Bernd R. T.

    2013-02-01

    Organic aerosols are important atmospheric components, and their formation and sources represent important aspects of urban air quality and health effects. Asia, including India, is the largest global source of aerosol particles due to regional natural advection (e.g. desert and soil dust) and anthropogenic activities (e.g. emissions from traffic, industry and burning of coal, biomass and agricultural waste) that generate vast amounts of particulate matter (PM) significantly contributing to climate change. This article reports on the distributions, concentrations, and sources of organic compounds (i.e., alkanes, carboxylic acids, carbonyl compounds, alcohols, plasticizers, PAHs, biomarkers) of PM in the ambient atmosphere of an extensively industrialized area of central India (Raipur, Chhattisgarh, a coal mega-burning region). The dominant components are emissions from fossil fuel utilization, burning of biomass and plastics, and fugitive sources. Speciation and variations of potential new tracer compounds identified are also described.

  10. INFLUENCE OF ASIAN DUSTS ON THE PHYSICOCHEMICAL PROPERTIES OF ATMOSPHERIC AEROSOLS IN TAIWAN DISTRICT- USING THE PENGHU ISLANDS AS AN EXAMPLE

    Institute of Scientific and Technical Information of China (English)

    Chung-Shin Yuan; Cheng-Chung Sau; Ming-Chung Chen

    2004-01-01

    Using the Penghu Islands as an example, this study investigates the influence of Asian dusts on the physicochemical properties of atmospheric aerosols in Taiwan District in the year of 2002. An aerosol-sampling site was established at Xiaumen, the Penghu Islands, to collect sea level atmospheric aerosols for further analysis of their physicochemical properties. This study revealed that, during the sampling campaign, three Asian dust storms were transported from North China and Mongolia to the Penghu Islands. The mass concentrations of atmospheric aerosols, particularly PM2.5~10, were generally 2~3 times higher than the regular level. An increase of coarse particle mode in the size distribution of atmospheric aerosols further validated the invasion of Asian dusts. Moreover, the comparison of water-soluble ionic species, carbonaceous content, and metallic content of atmospheric aerosols indicated that Asian dusts could significantly influence the chemical properties of atmospheric aerosols in Taiwan District. A significant increase of Cl-, Br-, Na+, K+, SO42-, Mg2+ and Ca2+ concentration on coarse particle mode was observed. It suggested that not just natural soil dusts and oceanic spray, but also anthropogenic pollutants could accompany Asian dusts. Source apportionment of atmospheric aerosols indicated that the concentration (percentage) of aerosol particles contributed from soil dusts increased significantly from 20.98 μg·m-3 (29.2%) to 60.37 μg·m-3 (47.7%), and then decreased to the regular level of 22.44 μg·m-3 (28.2%).

  11. The generation of particles with a vibrating reed aerosol generator

    International Nuclear Information System (INIS)

    The adhesion of contaminant particles to surfaces is a major problem in many industries. The strength of adhesion is dependent on the physical and chemical properties of the individual particles and those of the surface. The purpose of this project is to develop a sampling protocol to reproducibly remove particles from a surface thereby qualitatively measuring the adhesion strength. The suspended particles are subsequently collected and characterized by electron microscopy. The measurement of adhesion strength and subsequent characterization will enhance our understanding of adhesion of particles to surfaces. The approach towards development of a sampling protocol is to direct a stream of clean gas of known velocity on to a surface at varying angles, where particles have been previously deposited. The initial task is the development of a generator of monodisperse particles of known composition that can be deposited on a well defined surface. The authors have begun construction of a vibrating reed aerosol generator. The generator is based on the principal that a thin wire sweeps through a solution reservoir detaching droplets which on evaporation produce a stream of dry, solid particles of uniform size. The operational parameters of this aerosol generating system have been explored

  12. Impact of Different Aerosols on the Evolution of the Atmospheric Boundary Layer

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The present work analyzes the effect of aerosols on the evolution of the atmospheric boundary layer (ABL) over Shangdianzi in Beijing.A one-dimensional ABL model and a radiative transfer scheme are incorporated to develop the structure of the ABL.The diurnal variation of the atmospheric radiative budget,atmospheric heating rate,sensible and latent heat fluxes,surface and the 2 m air temperatures as well as the ABL height,and its perturbations due to the aerosols with different single-scattering albedo (SSA) are studied by comparing the aerosol-laden atmosphere to the clean atmosphere.The results show that the absorbing aerosols cause less reduction in surface evaporation relative to that by scatting aerosols,and both surface temperature and 2 m temperature decrease from the clean atmosphere to the aerosol-laden atmosphere.The greater the aerosol absorption,the more stable the surface layer.After 12:00 am,the 2 m temperature increases for strong absorption aerosols.In the meantime,there is a slight decrease in the 2 m temperature for purely scattering aerosols due to radiative cooling.The purely scattering aerosols decrease the ABL temperature and enhance the capping inversion,further reducing the ABL height.

  13. Two-photon excited fluorescence from biological aerosol particles

    International Nuclear Information System (INIS)

    We used a 40 MHz mode-locked 524 nm laser source to evaluate the utility of sub-picosecond excitation of fluorescence from 2-photon absorption in biological aerosols. Individual particles of biological composition, as well as other calibration particles, suspended in an inlet air flow were illuminated and measured as they passed through an optical chamber. To our knowledge, this was the first demonstration of 2-photon excited fluorescence from micron-sized particles composed of micro-organisms. We also observed a high fluorescence signal at visible wavelengths, which was not present with single-photon excitation.

  14. Evaluation of Vapor Pressure Estimation Methods for Use in Simulating the Dynamic of Atmospheric Organic Aerosols

    Directory of Open Access Journals (Sweden)

    A. J. Komkoua Mbienda

    2013-01-01

    Lee and Kesler (LK, and Ambrose-Walton (AW methods for estimating vapor pressures ( are tested against experimental data for a set of volatile organic compounds (VOC. required to determine gas-particle partitioning of such organic compounds is used as a parameter for simulating the dynamic of atmospheric aerosols. Here, we use the structure-property relationships of VOC to estimate . The accuracy of each of the aforementioned methods is also assessed for each class of compounds (hydrocarbons, monofunctionalized, difunctionalized, and tri- and more functionalized volatile organic species. It is found that the best method for each VOC depends on its functionality.

  15. Comparative analysis of hygroscopic properties of atmospheric aerosols at ZOTTO Siberian background station during summer and winter campaigns of 2011

    Science.gov (United States)

    Ryshkevich, T. I.; Mironov, G. N.; Mironova, S. Yu.; Vlasenko, S. S.; Chi, X.; Andreae, M. O.; Mikhailov, E. F.

    2015-09-01

    The results of measurements of hygroscopic properties and chemical analysis of atmospheric aerosol samples collected from June 10 to 20 and December 15 to 25, 2011, at the ZOTTO background stations (60.8° N, 89.35° E) in Central Siberia are presented. The sorption properties of aerosols are studied with the help of a differential analyzer of absorbed water mass in the relative humidity range of 5 to 99%. It has been found that the hygroscopic growth factor of aerosol particles collected during the winter campaign is on average 45% higher than that of the aerosol collected in the summer campaign, which leads to a 40% decrease in the critical supersaturation threshold of cloud activation of particles. The measurement data are analyzed and parameterized using a new approach that takes into account the concentration effects in the particle—water vapor system at low humidities. Based on the chemical analysis, the content of water-soluble substances in the winter sample is 2.5 times higher than in the summer sample. Here, the amount of sulfates and nitrates increases 20 and 88 times, respectively. A trajectory analysis of air mass motion shows that the increased content of inorganic ions in aerosols for the winter sample is caused by long-range transport of pollutants from industrial areas of Siberia. This difference in the chemical composition is the main source of the observed difference in hygroscopic and condensation properties of the aerosol particles.

  16. Use of stable carbon and nitrogen isotope ratios in size segregated aerosol particles for the O/I penetration evaluation

    Science.gov (United States)

    Garbaras, Andrius; Garbariene, Inga; Masalaite, Agne; Ceburnis, Darius; Krugly, Edvinas; Kvietkus, Kestutis; Remeikis, Vidmantas; Martuzevicius, Dainius

    2015-04-01

    Stable carbon and nitrogen isotope ratio are successfully used in the atmospheric aerosol particle source identification [1, 2], transformation, pollution [3] research. The main purpose of this study was to evaluate the penetration of atmospheric aerosol particles from outdoor to indoor using stable carbon and nitrogen isotope ratios. Six houses in Kaunas (Lithuania) were investigated during February and March 2013. Electrical low pressure impactor was used to measure in real time concentration and size distribution of outdoor aerosol particles. ELPI+ includes 15 channels covering the size range from 0.017 to 10.0 µm. The 25 mm diameter aluminium foils were used to collect aerosol particles. Gravimetric analysis of samples was made using microbalance. In parallel, indoor aerosol samples were collected with a micro-orifice uniform deposition impactor (MOUDI model 110), where the aerosol particles were separated with the nominal D50 cut-off sizes of 0.056, 0.1, 0.18,0.32,0.56, 1.0, 1.8, 3.2, 5.6, 10, 18 μm for impactor stages 1-11, respectively. The impactor was run at a flow rate of 30 L/min. Air quality meters were used to record meteorological conditions (temperature, relative humidity) during the investigated period. All aerosol samples were analyzed for total carbon (TC) and total nitrogen (TN) contents and their isotopic compositions using elemental analyzer (EA) connected to the stable isotope ratio mass spectrometer (IRMS). TC concentration in indoors ranged from 1.5 to 247.5 µg/m3. During the sampling period outdoors TN levels ranged from 0.1 to 10.9 µg/m3. The obtained outdoor δ13C(PM2.5) values varied from -24.21 to -26.3‰, while the δ15N values varied from 2.4 to 11.1 ‰ (average 7.2±2.5 ‰). Indoors carbonaceous aerosol particles were depleted in 13C compared to outdoors in all sampling sites. This depletion in δ13C varied from 0.1 to 3.2 ‰. We think that this depletion occurs due ongoing chemical reactions (oxidation) when aerosol

  17. Simultaneous ion luminescence imaging and spectroscopy of individual aerosol particles with external proton or helium microbeams

    Energy Technology Data Exchange (ETDEWEB)

    Kada, Wataru, E-mail: kada.wataru@gunma-u.ac.jp [Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515 (Japan); Satoh, Takahiro; Yokoyama, Akihito; Koka, Masashi; Kamiya, Tomihiro [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan)

    2014-08-01

    Simultaneous microscopic imaging and spectroscopy of individual aerosol particles were performed with an external microbeam. Visible luminescence induced by the external microbeam was successfully used as a probe to detect organic contaminants in the targets. Combined ion luminescence (IL)/particle-induced X-ray emission (PIXE) analysis of the aerosol targets revealed microscopic chemical and elemental composition distributions under ambient atmospheric conditions. The simple confocal micro-optics for the IL spectroscopy and microscopic imaging were sufficiently sensitive for detecting these molecules at sub-parts per million concentrations and at a wavelength resolution of less than 5 nm. The IL spectra were monitored to prevent severe damage to the samples. Furthermore, our IL system has the advantage that it is simple to add to a conventional micro-PIXE system.

  18. Simultaneous ion luminescence imaging and spectroscopy of individual aerosol particles with external proton or helium microbeams

    International Nuclear Information System (INIS)

    Simultaneous microscopic imaging and spectroscopy of individual aerosol particles were performed with an external microbeam. Visible luminescence induced by the external microbeam was successfully used as a probe to detect organic contaminants in the targets. Combined ion luminescence (IL)/particle-induced X-ray emission (PIXE) analysis of the aerosol targets revealed microscopic chemical and elemental composition distributions under ambient atmospheric conditions. The simple confocal micro-optics for the IL spectroscopy and microscopic imaging were sufficiently sensitive for detecting these molecules at sub-parts per million concentrations and at a wavelength resolution of less than 5 nm. The IL spectra were monitored to prevent severe damage to the samples. Furthermore, our IL system has the advantage that it is simple to add to a conventional micro-PIXE system

  19. Variation of atmospheric aerosol components and sources during smog episodes in Debrecen, Hungary

    International Nuclear Information System (INIS)

    Full text: Atmospheric particulate matter (APM) pollution is one of the leading environmental problems in densely populated urban environments. In most cities all around the world high aerosol pollution levels occurs regularly. Debrecen, an average middle-European city is no exception. Every year there are several days when the aerosol pollution level exceeds the alarm threshold value (100 μ-g/m3 for PM10 in 24- hours average). When the PM10 pollution level remains over this limit value for days, it is called 'smog' by the authorities. In this work we studied the variation of the elemental components and sources of PM10, PM2.5 and PM coarse and their dependence on meteorological conditions in Debrecen during two smog episodes occurred in November 2011. Aerosol samples were collected with 2-hours time resolution with a PIXE International sequential streaker in an urban background site in the downtown of Debrecen. In order to get information about the size distribution of the aerosol elemental components 9-stage cascade impactors were also employed during the sampling campaigns. The elemental composition (Z ≥ 13) were determined by Particle Induced X-Ray Emission (PIXE) at the IBA Laboratory of Atomki. Concentrations of elemental carbon were measured with a smoke stain reflectometer. On this data base source apportionment was carried out by using the positive matrix factorisation (PMF) method. Four factors were identified for both size fractions, including soil dust, traffic, domestic heating, and oil combustion. The time pattern of the aerosol elemental components and PM sources exhibited strong dependence on the mixing layer thickness. We showed that domestic heating had a major contribution to the aerosol pollution. (This work was carried out in the frame of the János Bolyai Research Scholarship of the Hungarian Academy of Sciences and TÁMOP-4.2.2/B-10/1-2010-0024 project). (author)

  20. Contribution of Local and Transported Atmospheric Aerosol in a European Air Pollution Hot-Spot

    Czech Academy of Sciences Publication Activity Database

    Zíková, Naděžda; Leoni, C.; Hovorka, J.; Ondráček, Jakub; Schwarz, Jaroslav

    -: Italian Aerosol Society, 2015. ISBN N. [European Aerosol Conference EAC 2015. Milano (IT), 06.09.2015-11.09.2015] R&D Projects: GA ČR(CZ) GBP503/12/G147 Institutional support: RVO:67985858 Keywords : atmospheric aerosol * air trajectories * hot-spot Subject RIV: DN - Health Impact of the Environment Quality

  1. Effects of atmospheric water on the optical properties of soot aerosols with different mixing states

    International Nuclear Information System (INIS)

    Soot aerosols have become the second most important contributor to global warming after carbon dioxide in terms of direct forcing, which is the dominant absorber of visible solar radiation. The optical properties of soot aerosols depend strongly on the mixing mechanism of black carbon with other aerosol components and its hygroscopic properties. In this study, the effects of atmospheric water on the optical properties of soot aerosols have been investigated using a superposition T-matrix method that accounts for the mixing mechanism of soot aerosols with atmospheric water. The dramatic changes in the optical properties of soot aerosols were attributed to its different mixing states with atmospheric water (externally mixed, semi-embedded mixed, and internally mixed). Increased absorption is accompanied by a larger increase in scattering, which is reflected by the increased single scattering albedo. The asymmetry parameter also increased when increasing the atmospheric water content. Moreover, atmospheric water intensified the radiative absorption enhancement attributed to the mixing states of the soot aerosols, with values ranging from 1.5 to 2.5 on average at 0.870 μm. The increased absorption and scattering ability of soot aerosols, which is attributed to atmospheric water, exerted an opposing effect on climate change. These findings should improve our understanding of the effects of atmospheric water on the optical properties of soot aerosols and their effects on climate. The mixing mechanism for soot aerosols and atmospheric water is important when evaluating the climate effects of soot aerosols, which should be explicitly considered in radiative forcing models. - Highlights: • Effects of atmospheric water on optical properties of soot aerosols are investigated. • Increased absorption is accompanied by a larger increase in scattering. • Atmospheric water intensified the absorption enhancement due the mixing states

  2. Origins and composition of fine atmospheric carbonaceous aerosol in the Sierra Nevada Mountains, California

    Directory of Open Access Journals (Sweden)

    D. R. Worton

    2011-06-01

    Full Text Available In this paper we report chemically resolved measurements of organic aerosol (OA and related tracers during the Biosphere Effects on Aerosols and Photochemistry Experiment (BEARPEX at the Blodgett Forest Research Station, California. OA contributed the majority of the mass to the fine atmospheric particles and was predominately oxygenated (OOA. The highest concentrations of OA were during sporadic wildfire influence when aged plumes were impacting the site. In situ measurements of particle phase molecular markers were dominated by secondary compounds and could be categorized into three factors or sources: (1 aged biomass burning emissions and oxidized urban emissions, (2 oxidation products of temperature-driven local biogenic emissions and (3 local light-driven emissions and oxidation products. There were multiple biogenic components that contributed to OA at this site whose contributions varied diurnally, seasonally and in response to changing meteorological conditions, e.g., temperature and precipitation events. Concentrations of isoprene oxidation products were larger when temperatures were higher due to more substantial emissions of isoprene and enhanced photochemistry. Methyl chavicol oxidation contributed similarly to OA during both identified meteorological periods. In contrast, the abundances of monoterpene oxidation products in the particle phase were greater during cooler conditions, even though emissions of the precursors were lower. Following the first precipitation event of the fall the abundances of the monoterpene oxidation products increased dramatically, although the mechanism is not known. OA was correlated with the anthropogenic tracers 2-propyl nitrate and carbon monoxide (CO, consistent with previous observations, while being comprised of mostly non-fossil carbon (>75 %. The correlation between OA and an anthropogenic tracer does not necessarily identify the source of the carbon as being anthropogenic but instead suggests a

  3. The study of aerosol component of atmosphere in Bratislava

    International Nuclear Information System (INIS)

    The aim of this study is to continue in the long-term measurement of radioactivity of aerosol component in low level atmosphere in Bratislava]. In particular our work is concerned with 210Pb, 7Be, 137Cs and 40K measurements. The concentrations of 210Pb and 7Be ranged from 0.27 to 2.93 mBq/m3 with a mean value 0.87 ± 0.02 mBq/m3 and from 0.46 to 4.42 mBq/m3 with a mean value 2.14 ± 0.04 mBq/m3, respectively. Both radionuclides show seasonal variations. The concentrations of 137Cs and 40K are near detection limit. It is a reason why only few data have been evaluated. The mean value of 137Cs and 40K is 0.6 ± 0.06 Bq/m3 and 5.5 ± 0.46 Bq/m3, respectively. Activity of aerosol component of low level atmosphere in Bratislava shows typical values of air activity concentrations of 210Pb, 7Be, 137Cs and 40K for European area

  4. Concentrations, size distributions and temporal variations of fluorescent biological aerosol particles in southern tropical India

    Science.gov (United States)

    Valsan, Aswathy; Krishna R, Ravi; CV, Biju; Huffman, Alex; Poschl, Ulrich; Gunthe, Sachin

    2015-04-01

    Biological aerosols constitute a wide range of dead and alive biological materials and structures that are suspended in the atmosphere. They play an important role in the atmospheric physical, chemical and biological processes and health of living being by spread of diseases among humans, plants, and, animals. The atmospheric abundance, sources, physical properties of PBAPs as compared to non-biological aerosols, however, is poorly characterized. The Indian tropical region, where large fraction of the world's total population is residing, experiences a distinctive meteorological phenomenon by means of Indian Summer Monsoon (IMS). Thus, the properties and characteristics of biological aerosols are also expected to be very diverse over the Indian subcontinent depending upon the seasons. Here we characterize the number concentration and size distribution of Fluorescent Biological Aerosol Particles (FBAP) at a high altitude continental site, Munnar (10.09 N, 77.06 E; 1605 m asl) in South India during the South-West monsoon, which constitute around 80 percent of the annual rainfall in Munnar. Continuous three months measurements (from 01 June 2014 to 21 Aug 2104) FBAPs were carried out at Munnar using Ultra Violet Aerodynamic Particle Sizer (UVAPS) during IMS. The mean number and mass concentration of coarse FBAP averaged over the entire campaign was 1.7 x 10-2 cm-3 and 0.24 µg m-3 respectively, which corresponds to 2 percent and 6 percent of total aerosol particle number and mass concentration. In agreement to other previous measurements the number size distribution of FBAP also peaks at 3.2 micron indicating the strong presence of fungal spores. This was also supported by the Scanning Electron Microscopic analysis of bioaerosols on filter paper. They also displayed a strong diurnal cycle with maximum concentration occurring at early morning hours. During periods of heavy and continuous rain where the wind is consistently blowing from South-West direction it was

  5. Time evolution and emission factors of aerosol particles from day and night time savannah fires

    Science.gov (United States)

    Vakkari, Ville; Beukes, Johan Paul; Tiitta, Petri; Venter, Andrew; Jaars, Kerneels; Josipovic, Miroslav; van Zyl, Pieter; Kulmala, Markku; Laakso, Lauri

    2013-04-01

    The largest uncertainties in the current global climate models originate from aerosol particle effects (IPCC, 2007) and at the same time aerosol particles also pose a threat to human health (Pope and Dockery, 2006). In southern Africa wild fires and prescribed burning are one of the most important sources of aerosol particles, especially during the dry season from June to September (e.g. Swap et al., 2003; Vakkari et al., 2012). The aerosol particle emissions from savannah fires in southern Africa have been studied in several intensive campaigns such as SAFARI 1992 and 2000 (Swap et al., 2003). However, all previous measurements have been carried out during the daytime, whereas most of the prescribed fires in southern Africa are lit up only after sunset. Furthermore, the previous campaigns followed the plume evolution for up to one hour after emission only. In this study, combining remote sensing fire observations to ground-based long-term measurements of aerosol particle and trace gas properties at the Welgegund measurement station (www.welgegund.org), we have been able to follow the time evolution of savannah fire plumes up to several hours in the atmosphere. For the first time the aerosol particle size distribution measurements in savannah fire plumes cover both day and night time plumes and also the ultrafine size range below 100 nm. During the period from May 20th 2010 to April 15th 2012 altogether 61 savannah fire plumes were observed at Welgegund. The evolution of the aerosol size distribution remained rapid for at least five hours after the fire: during this period the growth rate of the aerosol particle count mean diameter (size range 12 to 840 nm) was 24 nm h-1 for daytime plumes and 8 nm h-1 for night time plumes. The difference in the day and night time growth rate shows that photochemical reactions significantly increase the condensable vapour concentration in the plume. Furthermore, the condensable vapour concentration was found to affect both the

  6. Self-cleaning, maintenance-free aerosol filter by non-thermal plasma at atmospheric pressure.

    Science.gov (United States)

    Jidenko, N; Borra, J P

    2012-10-15

    Two lab-scale self-cleaning filters based on dielectric barrier discharges in air at atmospheric pressure have been developed and tested. Experimental results on aerosol removal by charging and electro-collection are presented versus plasma and hydrodynamic parameters for monodisperse aerosol from 20 nm to 1.2 μm. For classical atmospheric aerosol, the average mass and number filtration efficiencies exceed 95% and 87%, respectively in the most penetrating size range (100-700 nm). The frequency of the applied voltage controls the amplitude of the oscillation of charged particle and can be adjusted to favour either filtration or cleaning. Low frequency (1 kHz) is suitable for electro-collection, while high frequency (60 kHz) is favourable for filter cleaning. Electrical characterization and filter efficiency are two indicators of the filter loading. The durations of both filtration step at maximal efficiency and cleaning step depends on the deposited mass, the surface input power and subsequent dielectric surface temperature. PMID:22951224

  7. An inverse modeling procedure to determine particle growth and nucleation rates from measured aerosol size distributions

    Directory of Open Access Journals (Sweden)

    B. Verheggen

    2006-01-01

    Full Text Available Classical nucleation theory is unable to explain the ubiquity of nucleation events observed in the atmosphere. This shows a need for an empirical determination of the nucleation rate. Here we present a novel inverse modeling procedure to determine particle nucleation and growth rates based on consecutive measurements of the aerosol size distribution. The particle growth rate is determined by regression analysis of the measured change in the aerosol size distribution over time, taking into account the effects of processes such as coagulation, deposition and/or dilution. This allows the growth rate to be determined with a higher time-resolution than can be deduced from inspecting contour plots ('banana-plots''. Knowing the growth rate as a function of time enables the evaluation of the time of nucleation of measured particles of a certain size. The nucleation rate is then obtained by integrating the particle losses from time of measurement to time of nucleation. The regression analysis can also be used to determine or verify the optimum value of other parameters of interest, such as the wall loss or coagulation rate constants. As an example, the method is applied to smog chamber measurements. This program offers a powerful interpretive tool to study empirical aerosol population dynamics in general, and nucleation and growth in particular.

  8. Atmospheric aerosol source identification and estimates of source contributions to air pollution in Dundee, UK

    Science.gov (United States)

    Qin, Y.; Oduyemi, K.

    Anthropogenic aerosol (PM 10) emission sources sampled at an air quality monitoring station in Dundee have been analysed. However, the information on local natural aerosol emission sources was unavailable. A method that combines receptor model and atmospheric dispersion model was used to identify aerosol sources and estimate source contributions to air pollution. The receptor model identified five sources. These are aged marine aerosol source with some chlorine replaced by sulphate, secondary aerosol source of ammonium sulphate, secondary aerosol source of ammonium nitrate, soil and construction dust source, and incinerator and fuel oil burning emission source. For the vehicle emission source, which has been comprehensively described in the atmospheric emission inventory but cannot be identified by the receptor model, an atmospheric dispersion model was used to estimate its contributions. In Dundee, a significant percentage, 67.5%, of the aerosol mass sampled at the study station could be attributed to the six sources named above.

  9. Evaluation of the accuracy of analysis tools for atmospheric new particle formation

    OpenAIRE

    Korhonen, H.; S.-L. Sihto; V.-M. Kerminen; Lehtinen, K. E. J.

    2010-01-01

    Several mathematical tools have been developed in recent years to analyze new particle formation rates and to estimate nucleation rates and mechanisms at sub-3nm sizes from atmospheric aerosol data. Here we evaluate these analysis tools using 1239 numerical nucleation events for which the nucleation mechanism and formation rates were known exactly. The accuracy of the estimates of particle formation rate at 3 nm (J3) showed significant sensitivity to ...

  10. Evaluation of the accuracy of analysis tools for atmospheric new particle formation

    OpenAIRE

    Korhonen, H.; Sihto, S.-L.; Kerminen, V.-M.; Lehtinen, K. E. J.

    2011-01-01

    Several mathematical tools have been developed in recent years to analyze new particle formation rates and to estimate nucleation rates and mechanisms at sub-3 nm sizes from atmospheric aerosol data. Here we evaluate these analysis tools using 1239 numerical nucleation events for which the nucleation mechanism and formation rates were known exactly. The accuracy of the estimates of particle formation rate at 3 nm (J3) showed significant sensitivity to...

  11. Atmospheric Sampling of Aerosols to Stratospheric Altitudes using High Altitude Balloons

    Science.gov (United States)

    Jerde, E. A.; Thomas, E.

    2010-12-01

    Although carbon dioxide represents a long-lived atmospheric component relevant to global climate change, it is also understood that many additional contributors influence the overall climate of Earth. Among these, short-lived components are more difficult to incorporate into models due to uncertainties in the abundances of these both spatially and temporally. Possibly the most significant of these short-lived components falls under the heading of “black carbon” (BC). There are numerous overlapping definitions of BC, but it is basically carbonaceous in nature and light absorbing. Due to its potential as a climate forcer, an understanding of the BC population in the atmosphere is critical for modeling of radiative forcing. Prior measurements of atmospheric BC generally consist of airplane- and ground-based sampling, typically below 5000 m and restricted in time and space. Given that BC has a residence time on the order of days, short-term variability is easily missed. Further, since the radiative forcing is a result of BC distributed through the entire atmospheric column, aircraft sampling is by definition incomplete. We are in the process of planning a more comprehensive sampling of the atmosphere for BC using high-altitude balloons. Balloon-borne sampling is a highly reliable means to sample air through the entire troposphere and into the lower stratosphere. Our system will incorporate a balloon and a flight train of two modules. One module will house an atmospheric sampler. This sampler will be single-stage (samples all particle sizes together), and will place particles directly on an SEM sample stub for analysis. The nozzle depositing the sample will be offset from the center of the stub, placing the aerosol particles toward the edge. At various altitudes, the stub will be rotated 45 degrees, providing 6-8 sample “cuts” of particle populations through the atmospheric column. The flights will reach approximately 27 km altitude, above which the balloons

  12. Application of PIXE analysis to study urban atmospheric aerosols from downtown Havana City

    International Nuclear Information System (INIS)

    The present work reports, the results of a first study of elemental composition in airborne particulate matter (in fine and coarse particle size fractions) collected at the Atmospheric Monitoring Station in the Municipality of Centro Habana, using the Particle-Induced X-ray Emission (PIXE) technique. At present, there is not information available about elements contents in airborne particulate matter from this region. For this study, we carried out a sampling campaign during five months (November 14, 2006 to April 19, 2007). The samples were collected every second day during 24 h under an air flux of 20 l/min. The air sampler used was a Gent Sampler equipped with a Stacked Filter Unit (SFU) system which allows the aerosol collection in both size fractions simultaneously. A total of 144 aerosol samples were collected (72 correspond to the fine mass particle and 72 to the coarse mass particle). For PIXE analysis, the samples were irradiated by 2.5 MeV energy protons from the 2MV Van de Graff Tandetron Accelerator from the Laboratory of PIXE analysis at ININ, Mexico. A total of 14 elements (S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br and Pb) were consistently detected in both particle size fractions with minimum detection limits in the range of 1-10 ng/m3. The quantitative results obtained from PIXE elemental analysis for mass of particles in both fractions have revealed important information that has been used in a first attempt to understand and to characterize the atmospheric pollution of this area. A general discussion about these results is presented in this paper. (author)

  13. Airborne measurements of trace gas and aerosol particle emissions from biomass burning in Amazonia

    Directory of Open Access Journals (Sweden)

    P. Guyon

    2005-05-01

    Full Text Available As part of the LBA-SMOCC (Large-Scale Biosphere-Atmosphere Experiment in Amazonia – Smoke, Aerosols, Clouds, Rainfall, and Climate 2002 campaign, we studied the emission of carbon monoxide (CO, carbon dioxide (CO2, and aerosol particles from Amazonian deforestation fires using an instrumented aircraft. Emission ratios for aerosol number (CN relative to CO (ERCN/CO fell in the range 14–32 cm-3 ppb-1 for most of the time, in agreement with values usually found from tropical savanna fires. The number of particles emitted per amount biomass burned was found to be dependant on the fire condition (combustion efficiency. Variability in the ERCN/CO between fires was similar to the variability caused by variations in combustion behavior within each individual fire. This was confirmed by observations of CO-to-CO2 emission ratios (ERCO/CO2, which stretched across the same wide range of values for individual fires as for all the fires observed during the sampling campaign, indicating that flaming and smoldering phases are present simultaneously in deforestation fires. Emission factors (EF for CO and aerosol particles were computed and a correction was applied for the residual smoldering combustion (RSC fraction of emissions that are not sampled by the aircraft. The correction, previously unpublished for tropical deforestation fires, suggested an EF about one and a half to twice as large for these species. Vertical transport of biomass-burning plumes from the boundary layer (BL to the cloud detrainment layer (CDL and the free troposphere (FT was found to be a very common phenomenon. We observed a 20% loss in particle number as a result of this vertical transport and subsequent cloud processing, attributable to in-cloud coagulation. This small loss fraction suggests that this mode of transport is very efficient in terms of particle numbers and occurs mostly via non

  14. Airborne measurements of trace gas and aerosol particle emissions from biomass burning in Amazonia

    Directory of Open Access Journals (Sweden)

    P. Guyon

    2005-01-01

    Full Text Available As part of the LBA-SMOCC (Large-Scale Biosphere-Atmosphere Experiment in Amazonia - Smoke, Aerosols, Clouds, Rainfall, and Climate 2002 campaign, we studied the emission of carbon monoxide (CO, carbon dioxide (CO2, and aerosol particles from Amazonian deforestation fires using an instrumented aircraft. Emission ratios for aerosol number (CN relative to CO (ERCN/CO fell in the range 14-32 cm-3 ppb-1 in most of the investigated smoke plumes. Particle number emission ratios have to our knowledge not been previously measured in tropical deforestation fires, but our results are in agreement with values usually found from tropical savanna fires. The number of particles emitted per amount biomass burned was found to be dependent on the fire conditions (combustion efficiency. Variability in ERCN/CO between fires was similar to the variability caused by variations in combustion behavior within each individual fire. This was confirmed by observations of CO-to-CO2 emission ratios (ERCO/CO2, which stretched across the same wide range of values for individual fires as for all the fires observed during the sampling campaign, reflecting the fact that flaming and smoldering phases are present simultaneously in deforestation fires. Emission factors (EF for CO and aerosol particles were computed and a correction was applied for the residual smoldering combustion (RSC fraction of emissions that are not sampled by the aircraft, which increased the EF by a factor of 1.5-2.1. Vertical transport of smoke from the boundary layer (BL to the cloud detrainment layer (CDL and the free troposphere (FT was found to be a very common phenomenon. We observed a 20% loss in particle number as a result of this vertical transport and subsequent cloud processing, attributable to in-cloud coagulation. This small loss fraction suggests that this mode of transport is very efficient in terms of particle numbers and occurs mostly via non-precipitating clouds. The detrained aerosol

  15. Single particle analysis of the accumulation mode aerosol over the northeast Amazonian tropical rain forest, Surinam, South America

    Directory of Open Access Journals (Sweden)

    R. Krejci

    2004-01-01

    Full Text Available Single particle analysis of aerosols particles larger than 0.2 µm diameter was performed on 24 samples collected over Surinam tropical rain forest and in the adjacent marine boundary layer (MBL during the LBA-CLAIRE 98 campaign in March 1998. Elemental composition and morphology of 2308 particles was determined using SEM-EDX. The aerosol particles were divided into seven groups according to their chemical composition: organic particles, mineral dust, aged mineral dust, sea salt, aged sea salt, Ca-rich, and biogenic aerosol. Samples were further divided with respect to the distinct atmospheric layers present in the tropical troposphere including MBL, continental mixed layer, cloud convective layer, free troposphere and region of deep convection outflow. The organic and mineral dust particles are two major groups observed over the rainforest. In the MBL also sea salt particles represented a large fraction between 15 and 27%. The organic particles control much of the chemical characteristic of the aerosol in the continental tropical troposphere. Their abundance ranged from less than 20% in the MBL to more than 90% in the free troposphere between 4.5 and 12.6 km altitude. During the transport of the air masses from the MBL over the rain forest, fraction of organic aerosol particles more than doubled, reaching 40-60% in the continental boundary layer. This increase was attributed to direct emissions of biogenic aerosols from the tropical vegetation. The high fraction of the organic accumulation mode particles in the upper tropical troposphere could be a good indicator for the air masses originated over the tropical rain forest.

  16. The global impact of the transport sectors on atmospheric aerosol in 2030 – Part 1: Land transport and shipping

    Directory of Open Access Journals (Sweden)

    M. Righi

    2015-01-01

    Full Text Available Using the EMAC (ECHAM/MESSy Atmospheric Chemistry global climate-chemistry model coupled to the aerosol module MADE (Modal Aerosol Dynamics model for Europe, adapted for global applications, we simulate the impact of land transport and shipping emissions on global atmospheric aerosol and climate in 2030. Future emissions of short-lived gas and aerosol species follow the four Representative Concentration Pathways (RCPs designed in support of the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. We compare the resulting 2030 land-transport- and shipping-induced aerosol concentrations to the ones obtained for the year 2000 in a previous study with the same model configuration. The simulations suggest that black carbon and aerosol nitrate are the most relevant pollutants from land transport in 2000 and 2030 and their impacts are characterized by very strong regional variations during this time period. Europe and North America experience a decrease in the land-transport-induced particle pollution, although in these regions this sector remains a major source of surface-level pollution in 2030 under all RCPs. In Southeast Asia, however, a significant increase is simulated, but in this region the surface-level pollution is still controlled by other sources than land transport. Shipping-induced air pollution is mostly due to aerosol sulfate and nitrate, which show opposite trends towards 2030. Sulfate is strongly reduced as a consequence of sulfur reduction policies in ship fuels in force since 2010, while nitrate tends to increase due to the excess of ammonia following the reduction in ammonium sulfate. The aerosol-induced climate impact of both sectors is dominated by aerosol-cloud effects and is projected to decrease between 2000 and 2030, nevertheless still contributing a significant radiative forcing to Earth's radiation budget.

  17. Factors controlling the solubility of trace metals in atmospheric aerosols over the Eastern Mediterranean

    Science.gov (United States)

    Nikolaou, Panagiota; Mihalopoulos, Nikolaos; Kanakidou, Maria

    2015-04-01

    Atmospheric input of aerosols is recognized, as an important source of nutrients, for the oceans. The chemical interactions between aerosols and varying composition of air masses lead to different coating of their surfaces with sulfate, nitrate and organic compounds, increasing their solubility and their role as a carrier of nutrients and pollutants in ecosystems. Recent works have highlighted that atmospheric inputs of nutrients and trace metals can considerably influence the marine ecosystem functioning at semi-enclosed or enclosed water bodies such as the eastern Mediterranean. The current work aims to determine the sources and the factors controlling the variability of nutrients in the eastern Mediterranean. Special focus has been given on trace elements solubility, considered either as key nutrients for phytoplankton growth such as iron (Fe), phosphorus (P) or inhibitors such as copper (Cu). This has been accomplished by analyzing size segregated aerosol samples collected at the background site of Finokalia in Crete for an entire year. Phosphorus concentrations indicate important increases in air masses influenced both by anthropogenic activities in the northeast European countries and by dust outbreaks. The last is confirmed by the correlation observed between total P and dust concentrations and by the air mass backward trajectories computed by running the NOAA Hysplit Model (Hybrid Single - Particle Langrangian Integrated Trajectory (http://www.arl.noaa.gov/ready/hysplit4.html). Overall 73% of total P has been found to be associated with anthropogenic sources. The solubility of P and Fe has been found to be closely related to the acidity (pH) and dust amount in aerosols. The aerosol pH was predicted using thermodynamic modeling (ISORROPIA-II), meteorological observations (RH, T), and gas/particle observations. More specifically P and Fe solubility appears to be inversely related to the crustal elements levels, while it increases in acidic environment. The

  18. Study of Cl containing urban aerosol particles by ion beam analytical methods

    International Nuclear Information System (INIS)

    Complete text of publication follows. In the densely populated areas of Europe one of the most important environmental problems is aerosol pollution. Thus one of the main goals of atmospheric research is to determine aerosol sources. In order to identify the origin of the particles, the knowledge of the chemical composition and size distribution is demanded. As a result of a source apportionment study, several sources of fine (particles with aerodynamic diameter < 2.5 μm) and coarse (10 μm ≥ aerodynamic diameter ≥ 2.5 μm) urban particulate matter were identified in Debrecen, using the hourly evolution of the elemental components. Sources characterized by high chlorine content were found in both size fractions, which gave significant contribution to the aerosol concentration in Debrecen. However, the origin of these particles could not be identified on the available information. In this work we give a more accurate characterization of the sources of coarse-mode Cl by using single particle analysis. Aerosol samples with 2-3 hours time resolution were collected in the frame of sampling campaigns in the garden of ATOMKI between October 2007 and January 2009. The elemental composition (for Z ≥ 13) was determined by Particle Induced X-ray Emission (PIXE). Single particle analysis of chosen samples was done on the ATOMKI Scanning Nuclear Microprobe Facility. Morphology, size and elemental composition for Z ≥ 6 of around 1000 coarse mode particles were determined by Scanning Transmission Ion Microscopy, light element PIXE and PIXE analytical methods. Hierarchical cluster analysis was performed on the data set to group the particles. In order to determine the possible sources of Cl in the coarse mode, the correlation between Cl and other elements, which could be used as tracers of different sources, was examined. Cl showed very strong correlation with Na. However the Cl:Na ratio was found to be different for different episodes indicating different origin of these

  19. High spectral resolution lidar to measure optical scattering properties of atmospheric aerosols. I - Theory and instrumentation

    Science.gov (United States)

    Shipley, S. T.; Tracy, D. H.; Eloranta, E. W.; Roesler, F. L.; Weinman, J. A.; Trauger, J. T.; Sroga, J. T.

    1983-01-01

    A high spectral resolution lidar technique to measure optical scattering properties of atmospheric aerosols is described. Light backscattered by the atmosphere from a narrowband optically pumped oscillator-amplifier dye laser is separated into its Doppler broadened molecular and elastically scattered aerosol components by a two-channel Fabry-Perot polyetalon interferometer. Aerosol optical properties, such as the backscatter ratio, optical depth, extinction cross section, scattering cross section, and the backscatter phase function, are derived from the two-channel measurements.

  20. Flux induced growth of atmospheric nano-particles by organic vapors

    Directory of Open Access Journals (Sweden)

    J. Wang

    2012-09-01

    Full Text Available Atmospheric aerosols play critical roles in air quality, public health, and visibility. In addition, they strongly influence climate by scattering solar radiation and by changing the reflectivity and lifetime of clouds. One major but still poorly understood source of atmospheric aerosol is new particle formation, which consists of the formation of thermodynamically stable clusters from trace gas molecules (homogeneous nucleation followed by growth of these clusters to a detectable size (~3 nm. Because freshly nucleated clusters are most susceptible to loss due to high rate of coagulation with pre-existing aerosol population, the initial growth rate strongly influences the rate of new particle formation and ambient aerosol population. Whereas many field observations and modeling studies indicate that organics enhance the initial growth of the clusters and therefore new particle formation, thermodynamic considerations would suggest that the strong increase of equilibrium vapor concentration due to cluster surface curvature (Kelvin effect may prevent ambient organics from condensing on these small clusters. Here the initial condensational growth of freshly nucleated clusters is described as heterogeneous nucleation of organic molecules onto these clusters. We find that the strong gradient in cluster population with respect to its size lead to positive cluster number flux, and therefore driving the growth of clusters substantially smaller than the Kelvin diameter, conventionally considered as the minimum particle size that can be grown through condensation. The conventional approach neglects this contribution from the cluster concentration gradient, and underestimates the rate of new particle formation by a factor of up to 60.

  1. Influence of particle phase state on the hygroscopic behavior of mixed organic–inorganic aerosols

    Directory of Open Access Journals (Sweden)

    N. Hodas

    2014-12-01

    Full Text Available Recent work has demonstrated that organic and mixed organic–inorganic particles can exhibit multiple phase states depending on their chemical composition and on ambient conditions such as relative humidity (RH. To explore the extent to which water uptake varies with particle phase behavior, hygroscopic growth factors (HGFs of nine laboratory-generated, organic and organic–inorganic aerosol systems with physical states ranging from well-mixed liquids, to phase-separated particles, to viscous liquids or semi-solids were measured with the Differential Aerosol Sizing and Hygroscopicity Spectrometer Probe at RH values ranging from 40–90%. Water-uptake measurements were accompanied by HGF and RH-dependent thermodynamic equilibrium calculations using the Aerosol Inorganic–Organic Mixtures Functional groups Activity Coefficients (AIOMFAC model. In addition, AIOMFAC-predicted growth curves are compared to several simplified HGF modeling approaches: (1 representing particles as ideal, well-mixed liquids, (2 forcing a single phase, but accounting for non-ideal interactions through activity coefficient calculations, and (3 a Zdanovskii–Stokes–Robinson-like calculation in which complete separation between the inorganic and organic components is assumed at all RH values, with water-uptake treated separately in each of the individual phases. We observed variability in the characteristics of measured hygroscopic growth curves across aerosol systems with differing phase behaviors, with growth curves approaching smoother, more continuous water uptake with decreasing prevalence of liquid–liquid phase separation and increasing oxygen : carbon ratios of the organic aerosol components. We also observed indirect evidence for the dehydration-induced formation of highly viscous semi-solid phases and for kinetic limitations to the crystallization of ammonium sulfate at low RH for sucrose-containing particles. AIOMFAC-predicted growth curves are generally in

  2. Biomass burning influences on atmospheric composition: A case study to assess the impact of aerosol data assimilation

    Science.gov (United States)

    Keslake, Tim; Chipperfield, Martyn; Mann, Graham; Flemming, Johannes; Remy, Sam; Dhomse, Sandip; Morgan, Will

    2016-04-01

    The C-IFS (Composition Integrated Forecast System) developed under the MACC series of projects and to be continued under the Copernicus Atmospheric Monitoring System, provides global operational forecasts and re-analyses of atmospheric composition at high spatial resolution (T255, ~80km). Currently there are 2 aerosol schemes implemented within C-IFS, a mass-based scheme with externally mixed particle types and an aerosol microphysics scheme (GLOMAP-mode). The simpler mass-based scheme is the current operational system, also used in the existing system to assimilate satellite measurements of aerosol optical depth (AOD) for improved forecast capability. The microphysical GLOMAP scheme has now been implemented and evaluated in the latest C-IFS cycle alongside the mass-based scheme. The upgrade to the microphysical scheme provides for higher fidelity aerosol-radiation and aerosol-cloud interactions, accounting for global variations in size distribution and mixing state, and additional aerosol properties such as cloud condensation nuclei concentrations. The new scheme will also provide increased aerosol information when used as lateral boundary conditions for regional air quality models. Here we present a series of experiments highlighting the influence and accuracy of the two different aerosol schemes and the impact of MODIS AOD assimilation. In particular, we focus on the influence of biomass burning emissions on aerosol properties in the Amazon, comparing to ground-based and aircraft observations from the 2012 SAMBBA campaign. Biomass burning can affect regional air quality, human health, regional weather and the local energy budget. Tropical biomass burning generates particles primarily composed of particulate organic matter (POM) and black carbon (BC), the local ratio of these two different constituents often determining the properties and subsequent impacts of the aerosol particles. Therefore, the model's ability to capture the concentrations of these two

  3. Quantification of aerosol chemical composition using continuous single particle measurements

    OpenAIRE

    C.-H. Jeong; M. L. McGuire; K. J. Godri; Slowik, J. G.; P. J. G. Rehbein; G. J. Evans

    2011-01-01

    Mass concentrations of sulphate, nitrate, ammonium, organic carbon (OC), elemental carbon (EC) were determined from real time single particle data in the size range 0.1–3.0 μm measured by an Aerosol Time-of-Flight Mass Spectrometer (ATOFMS) at urban and rural sites in Canada. To quantify chemical species within individual particles measured by an ATOFMS, ion peak intensity of m/z −97 for sulphate, −62 for nitrate, +18 for ammonium, +43 for OC, and +36 for EC were scaled usi...

  4. Quantification of aerosol chemical composition using continuous single particle measurements

    OpenAIRE

    Jeong, C.-H.; M. L. McGuire; K. J. Godri; Slowik, J. G.; P. J. G. Rehbein; G. J. Evans

    2011-01-01

    Mass concentrations of sulphate, nitrate, ammonium, organic carbon (OC), elemental carbon (EC) were determined from real time single particle data in the size range 0.1–3.0 μm measured by an Aerosol Time-of-Flight Mass Spectrometer (ATOFMS) at urban and rural sites in Canada. To quantify chemical species within individual particles measured by an ATOFMS, ion peak intensity of m/z −97 for sulphate, −62 for nitrate, +18 for ammonium, +43 for OC, and +36 for EC were scaled usin...

  5. Analyses on the formation of atmospheric particles and stabilized sulphuric acid clusters

    Energy Technology Data Exchange (ETDEWEB)

    Paasonen, P.

    2012-11-01

    Aerosol particles have various effects on our life. They affect the visibility and have diverse health effects, but are also applied in various applications, from drug inhalators to pesticides. Additionally, aerosol particles have manifold effects on the Earths' radiation budget and thus on the climate. The strength of the aerosol climate effect is one of the factors causing major uncertainties in the global climate models predicting the future climate change. Aerosol particles are emitted to atmosphere from various anthropogenic and biogenic sources, but they are also formed from precursor vapours in many parts of the world in a process called atmospheric new particle formation (NPF). The uncertainties in aerosol climate effect are partly due to the current lack of knowledge of the mechanisms governing the atmospheric NPF. It is known that gas phase sulphuric acid most certainly plays an important role in atmospheric NPF. However, also other vapours are needed in NPF, but the exact roles or even identities of these vapours are currently not exactly known. In this thesis I present some of the recent advancements in understanding of the atmospheric NPF in terms of the roles of the participating vapours and the meteorological conditions. Since direct measurements of new particle formation rate in the initial size scale of the formed particles (below 2 nm) are so far infrequent in both spatial and temporal scales, indirect methods are needed. The work presented on the following pages approaches the NPF from two directions: by analysing the observed formation rates of particles after they have grown to sizes measurable with widely applied instruments (2 nm or larger), and by measuring and modelling the initial sulphuric acid cluster formation. The obtained results can be summarized as follows. (1) The observed atmospheric new particle formation rates are typically connected with sulphuric acid concentration to the power close to two. (2) Also other compounds, most

  6. Liquid-liquid phase separation in aerosol particles: Imaging at the Nanometer Scale

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, Rachel; Wang, Bingbing; Kelly, Stephen T.; Lundt, Nils; You, Yuan; Bertram, Allan K.; Leone, Stephen R.; Laskin, Alexander; Gilles, Mary K.

    2015-04-21

    Atmospheric aerosols can undergo phase transitions including liquid-liquid phase separation (LLPS) while responding to changes in the ambient relative humidity (RH). Here, we report results of chemical imaging experiments using environmental scanning electron microscopy (ESEM) and scanning transmission x-ray microscopy (STXM) to investigate the LLPS of micron sized particles undergoing a full hydration-dehydration cycle. Internally mixed particles composed of ammonium sulfate (AS) and either: limonene secondary organic carbon (LSOC), a, 4-dihydroxy-3-methoxybenzeneaceticacid (HMMA), or polyethylene glycol (PEG-400) were studied. Events of LLPS with apparent core-shell particle morphology were observed for all samples with both techniques. Chemical imaging with STXM showed that both LSOC/AS and HMMA/AS particles were never homogeneously mixed for all measured RH’s above the deliquescence point and that the majority of the organic component was located in the shell. The shell composition was estimated as 65:35 organic: inorganic in LSOC/AS and as 50:50 organic: inorganic for HMMA/AS. PEG-400/AS particles showed fully homogeneous mixtures at high RH and phase separated below 89-92% RH with an estimated 50:50% organic to inorganic mix in the shell. These two chemical imaging techniques are well suited for in-situ analysis of the hygroscopic behavior, phase separation, and surface composition of collected ambient aerosol particles.

  7. Detection of biological particles in ambient air using Bio-Aerosol Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    McJimpsey, E L; Steele, P T; Coffee, K R; Fergenson, D P; Riot, V J; Woods, B W; Gard, E E; Frank, M; Tobias, H J; Lebrilla, C

    2006-03-16

    The Bio-Aerosol Mass Spectrometry (BAMS) system is an instrument used for the real time detection and identification of biological aerosols. Particles are drawn from the atmosphere directly into vacuum and tracked as they scatter light from several continuous wave lasers. After tracking, the fluorescence of individual particles is excited by a pulsed 266nm or 355nm laser. Molecules from those particles with appropriate fluorescence properties are subsequently desorbed and ionized using a pulsed 266nm laser. Resulting ions are analyzed in a dual polarity mass spectrometer. During two field deployments at the San Francisco International Airport, millions of ambient particles were analyzed and a small but significant fraction were found to have fluorescent properties similar to Bacillus spores and vegetative cells. Further separation of non-biological background particles from potential biological particles was accomplished using laser desorption/ionization mass spectrometry. This has been shown to enable some level of species differentiation in specific cases, but the creation and observation of higher mass ions is needed to enable a higher level of specificity across more species. A soft ionization technique, matrix-assisted laser desorption/ionization (MALDI) is being investigated for this purpose. MALDI is particularly well suited for mass analysis of biomolecules since it allows for the generation of molecular ions from large mass compounds that would fragment under normal irradiation. Some of the initial results from a modified BAMS system utilizing this technique are described.

  8. Detection of biological particles in ambient air using Bio-Aerosol Mass Spectrometry

    International Nuclear Information System (INIS)

    The Bio-Aerosol Mass Spectrometry (BAMS) system is an instrument used for the real time detection and identification of biological aerosols. Particles are drawn from the atmosphere directly into vacuum and tracked as they scatter light from several continuous wave lasers. After tracking, the fluorescence of individual particles is excited by a pulsed 266nm or 355nm laser. Molecules from those particles with appropriate fluorescence properties are subsequently desorbed and ionized using a pulsed 266nm laser. Resulting ions are analyzed in a dual polarity mass spectrometer. During two field deployments at the San Francisco International Airport, millions of ambient particles were analyzed and a small but significant fraction were found to have fluorescent properties similar to Bacillus spores and vegetative cells. Further separation of non-biological background particles from potential biological particles was accomplished using laser desorption/ionization mass spectrometry. This has been shown to enable some level of species differentiation in specific cases, but the creation and observation of higher mass ions is needed to enable a higher level of specificity across more species. A soft ionization technique, matrix-assisted laser desorption/ionization (MALDI) is being investigated for this purpose. MALDI is particularly well suited for mass analysis of biomolecules since it allows for the generation of molecular ions from large mass compounds that would fragment under normal irradiation. Some of the initial results from a modified BAMS system utilizing this technique are described

  9. Phase transitions and hygroscopic growth of aerosol particles containing humic acid and mixtures of humic acid and ammonium sulphate

    Science.gov (United States)

    Badger, C. L.; George, I.; Griffiths, P. T.; Braban, C. F.; Cox, R. A.; Abbatt, J. P. D.

    2006-03-01

    The phase transitions and hygroscopic growth of two humic acid aerosols (Aldrich sodium salt and Leonardite Standard (IHSS)) and their mixtures with ammonium sulphate have been investigated using a combination of two techniques, Fourier transform infra-red (FTIR) spectroscopy and tandem differential mobility analysis (TDMA). A growth factor of 1.16 at 85% relative humidity (RH) was found for the Aldrich humic acid which can be regarded as an upper limit for growth factors of humic-like substances (HULIS) found in atmospheric aerosol and is significantly smaller than that of typical atmospheric inorganics. We find that the humic acid aerosols exhibit water uptake over all relative humidities with no apparent phase changes, suggesting that these aerosols readily form supersaturated droplets. In the mixed particles, the humic acid component decreases the deliquescence relative humidity (DRH) and increases the efflorescence relative humidity (ERH) of the ammonium sulphate component, and there is some degree of water uptake prior to ammonium sulphate deliquescence. In addition, at low RH, the FTIR spectra show that the ammonium is present in a different chemical environment in the mixed aerosols than in crystalline ammonium sulphate, perhaps existing as a complex with the humic materials. The growth factors of the mixed aerosols are intermediate between those of the single-component aerosols and can be predicted assuming that the inorganic and organic fractions take up water independently.

  10. Phase transitions and hygroscopic growth of aerosol particles containing humic acid and mixtures of humic acid and ammonium sulphate

    Directory of Open Access Journals (Sweden)

    C. L. Badger

    2006-01-01

    Full Text Available The phase transitions and hygroscopic growth of two humic acid aerosols (Aldrich sodium salt and Leonardite Standard (IHSS and their mixtures with ammonium sulphate have been investigated using a combination of two techniques, Fourier transform infra-red (FTIR spectroscopy and tandem differential mobility analysis (TDMA. A growth factor of 1.16 at 85% relative humidity (RH was found for the Aldrich humic acid which can be regarded as an upper limit for growth factors of humic-like substances (HULIS found in atmospheric aerosol and is significantly smaller than that of typical atmospheric inorganics. We find that the humic acid aerosols exhibit water uptake over all relative humidities with no apparent phase changes, suggesting that these aerosols readily form supersaturated droplets. In the mixed particles, the humic acid component decreases the deliquescence relative humidity (DRH and increases the efflorescence relative humidity (ERH of the ammonium sulphate component, and there is some degree of water uptake prior to ammonium sulphate deliquescence. In addition, at low RH, the FTIR spectra show that the ammonium is present in a different chemical environment in the mixed aerosols than in crystalline ammonium sulphate, perhaps existing as a complex with the humic materials. The growth factors of the mixed aerosols are intermediate between those of the single-component aerosols and can be predicted assuming that the inorganic and organic fractions take up water independently.

  11. Optical particle counter measurement of marine aerosol hygroscopic growth

    Directory of Open Access Journals (Sweden)

    J. R. Snider

    2007-08-01

    Full Text Available A technique is developed for the determination of the hygroscopic growth factor of dry particles with diameter between 0.3 and 0.6 µm and is applied to measurements made during the second Dynamics and Chemistry of Marine Stratocumulus experiment. Two optical particle counters are utilized, one measures the aerosol size spectrum at ambient relative humidity and the other simultaneously dries the aerosol prior to light scattering detection. Growth factors are based on measurements made in the region of the Mie scattering curve where scattered light intensity increases monotonically with dry and wet particle diameter, i.e. D<0.9 µm. Factors influencing the accuracy of the measurement are evaluated, including particle drying, refractive index and shape. Growth factors at 90±3% ambient relative humidity in marine airmasses 400 km west of San Diego, California range between 1.5 and 1.8. This suggests that a significant fraction of the particle mass, between 40 and 70%, is either non-hygroscopic or weakly hygroscopic.

  12. Optical particle counter measurement of marine aerosol hygroscopic growth

    Directory of Open Access Journals (Sweden)

    J. R. Snider

    2008-04-01

    Full Text Available A technique is developed for the determination of the hygroscopic growth factor of dry particles with diameter between 0.3 and 0.6 μm and is applied to measurements made during the second Dynamics and Chemistry of Marine Stratocumulus experiment (DYCOMS-II. Two optical particle counters are utilized, one measures the aerosol size spectrum at ambient relative humidity and the other simultaneously dries the aerosol prior to light scattering detection. Growth factors are based on measurements made in the region of the Mie scattering curve where scattered light intensity increases monotonically with dry and wet particle diameter, i.e. D<0.9 μm. Factors influencing the accuracy of the measurement are evaluated, including particle drying, refractive index and shape. Growth factors at 90±3% ambient relative humidity in marine airmasses 400 km west of San Diego, California range between 1.5 and 1.8. This suggests that a significant fraction of the particle mass, between 40 and 70%, is either non-hygroscopic or weakly hygroscopic.

  13. Chemical composition of the atmospheric aerosol in the troposphere over the Hudson Bay lowlands and Quebec-Labrador regions of Canada

    Science.gov (United States)

    Gorzelska, K.; Talbot, R. W.; Klemm, K.; Lefer, B.; Klemm, O.; Gregory, G. L.; Anderson, B.; Barrie, L. A.

    1994-01-01

    Atmospheric aerosols were collected in the boundary layer and free troposphere over continental and coastal subarctic regions of Canada during the July - August 1990 joint U.S.-Canadian Arctic Boundary Layer Expedition (ABLE) 3B/Northern Wetlands Study (NOWES). The samples were analyzed for the following water soluble species: sulfate, nitrate, ammonium, potassium, sodium, chloride, oxalate, methylsulfonate, and total amine nitrogen. Ammonium and sulfate were the major water soluble components of these aerosols. The nearly neutral (overall) chemical composition of summertime aerosol particles contrasts their strongly acidic wintertime composition. Aerosol samples were separated into several air mass categories and characterized in terms of chemical composition, associated mixing ratios of gaseous compounds, and meteorological parameters. The fundamental category represented particles associated with 'background' air masses. The summertime atmospheric aerosols in background air over the North American subarctic and Arctic regions were characterized by relatively small and spatially uniform mixing ratios of the measured species. These aerosol particles were aged to the extent that they had lost their primary source signature. The chemical profile of the background air aerosols was frequently modified by additions from biomass fire plumes, aged tropical marine air, and intrusions of upper tropospheric/lower stratospheric air. Aerosols in boundary layer background air over the boreal forest region of Quebec-Labrador had significantly larger mixing ratios of ammonium and sulfate relative to the Hudson Bay region. This may reflect infiltration of anthropogenic pollution or be due to natural emissions from this region.

  14. Particle-size distribution and gas/particle partitioning of atmospheric polybrominated diphenyl ethers in urban areas of Greece

    Energy Technology Data Exchange (ETDEWEB)

    Mandalakis, Manolis; Besis, Athanasios [Environmental Chemical Processes Laboratory, Department of Chemistry, University of Crete, GR-71003 Heraklion-Voutes (Greece); Stephanou, Euripides G. [Environmental Chemical Processes Laboratory, Department of Chemistry, University of Crete, GR-71003 Heraklion-Voutes (Greece)], E-mail: stephanou@chemistry.uoc.gr

    2009-04-15

    Ambient concentrations, gas/particle partitioning and particle-size distribution of polybrominated diphenyl ethers (PBDEs) were investigated in two urban areas (Athens and Heraklion) of Greece. Atmospheric (gas + particle) concentrations of {sigma}PBDE varied from 21 to 30 pg m{sup -3} in the center of Athens and from 4 to 44 pg m{sup -3} in the suburbs of Heraklion. A predominance of particulate PBDEs was observed in Athens (71-76% in particles), whereas the opposite was evident in Heraklion (69-92% in gas phase). In both urban areas, PBDE particle-size distribution featured a distinct enrichment in smaller particles. A similar trend was also observed in aerosols of a background marine site. For all sampling sites, more than 46% of {sigma}PBDE was associated with particles of <0.57 {mu}m in diameter. Our results imply that particulate PBDEs may have long atmospheric residence time and they may be capable of reaching the deeper parts of the human respiratory system. - Analysis of size-segregated aerosol samples indicates a predominance of polybrominated diphenyl ethers in the small particle-size fraction.

  15. Particle size distribution of halogenated flame retardants and implications for atmospheric deposition and transport.

    Science.gov (United States)

    Okonski, Krzysztof; Degrendele, Céline; Melymuk, Lisa; Landlová, Linda; Kukučka, Petr; Vojta, Šimon; Kohoutek, Jiří; Čupr, Pavel; Klánová, Jana

    2014-12-16

    This study investigates the distribution of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD) and a group of novel flame retardants (NFRs) on atmospheric aerosols. Two high volume cascade impactors were used to collect particulate fractions of ambient air over a one year period at urban and rural sites. The majority of FRs were found on the finest aerosols (<0.95 μm). Concentrations of HBCD were higher than those of ΣPBDEs. Moreover, we noted seasonality and spatial differences in particle size distributions, yet a large portion of the observed differences were due to differences in particulate matter (PM) itself. When normalized by PM, the size distributions of the FRs exhibited much greater heterogeneity. Differences existed between the FR distributions by molecular weight, with the higher molecular weight FRs (e.g., BDE-209, Dechlorane Plus) distributed more uniformly across all particulate size fractions. The seasonal, spatial, and compound-specific differences are of crucial importance when estimating dry and wet deposition of FRs as smaller aerosols have longer atmospheric residence times. Estimated wet and dry deposition of four representative FRs (BDE-47, BDE-209, HBCD, and Dechlorane Plus) using size-segregated aerosol data resulted in lower deposition estimates than when bulk aerosol data were used. This has implications for estimates of long-range atmospheric transport and atmospheric residence times, as it suggests that without size-specific distributions, these parameters could be underestimated for FRs. PMID:25380095

  16. Field and laboratory studies of atmospheric reactive mercury: Gas-particle partitioning and sources

    Science.gov (United States)

    Rutter, Andrew Philip

    Certain aspects of atmospheric reactive mercury (RM) source-receptor relationships are not well understood. The objective of this dissertation was to improve the understanding of these relationships in the following areas: (i) gas-particle partitioning, and; (ii) the local impacts of RM source emissions. A novel aerosol reactor was developed to study gas-particle partitioning of RM using synthetic atmospheric aerosol containing picogram concentrations of RM. The RM in the aerosol was collected in an offline mode with filters and sorbent, and analyzed with Thermal Desorption Analysis (TDA). The offline-TDA collection and analysis method was compared with a commercial real time ambient mercury analyzer and two wet analysis methods using ambient measurements. The offline-TDA method performed well in comparison to the established techniques. The dependencies of gas-particle partitioning coefficients upon temperature and particle composition were determined and parameterized from field studies and laboratory experiments. The volatility of RM increased with ambient temperature in urban aerosol and laboratory aerosol of ammonium sulfate and adipic acid. The dependence of RM gas-particle partitioning on particle composition were determined using synthetic atmospheric aerosol generated in the laboratory. RM partitioned predominantly to the particle phase in particles of sodium nitrate, sodium chloride and potassium chloride, but was much more volatile in particles made of ammonium sulfate, levoglucosan and adipic acid. The impacts of RM sources on local receptors were studied in southern Wisconsin and Mexico City. RM measurements were made over a year in Milwaukee, WI (urban) and Devil's Lake State Park, WI (rural). An urban excess of all three mercury species was detected in Milwaukee, WI. The urban excess was attributed to a higher density of mercury emissions in the Milwaukee, WI-Chicago, IL area. The impact of local sources of RM on both sites was found to dominate the

  17. Uncertainty evaluation in correlated quantities: application to elemental analysis of atmospheric aerosols;Evaluacion de la incertidumbre en cantidades correlacionadas: aplicacion al analisis elemental de aerosoles atmosfericos

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa, A.; Miranda, J.; Pineda, J. C., E-mail: miranda@fisica.unam.m [UNAM, Instituto de Fisica, Circuito de la Investigacion Cientifica s/n, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)

    2010-07-01

    One of the aspects that are frequently overlooked in the evaluation of uncertainty in experimental data is the possibility that the involved quantities are correlated among them, due to different causes. An example in the elemental analysis of atmospheric aerosols using techniques like X-ray Fluorescence (X RF) or Particle Induced X-ray Emission (PIXE). In these cases, the measured elemental concentrations are highly correlated, and then are used to obtain information about other variables, such as the contribution from emitting sources related to soil, sulfate, non-soil potassium or organic matter. This work describes, as an example, the method required to evaluate the uncertainty in variables determined from correlated quantities from a set of atmospheric aerosol samples collected in the Metropolitan Area of the Mexico Valley and analyzed with PIXE. The work is based on the recommendations of the Guide for the Evaluation of Uncertainty published by the International Organization for Standardization. (Author)

  18. Program Abstracts: Formation and Growth of Atmospheric Aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Peter H. McMurry; Markku Kulmala

    2006-09-07

    DOE provided $11,000 to sponsor the Workshop on New Particle Formation in the Atmosphere, which was held at The Riverwood Inn and Conference Center near Minneapolis, MN from September 7 to 9, 2006. Recent work has shown that new particle formation is an important atmospheric process that must be better understood due to its impact on cloud cover and the Earth's radiation balance. The conference was an informal gathering of atmospheric and basic scientists with expertise pertinent to this topic. The workshop included discussions of: • atmospheric modeling; • computational chemistry pertinent to clustering; • ions and ion induced nucleation; • basic laboratory and theoretical studies of nucleation; • studies on neutral molecular clusters; • interactions of organic compounds and sulfuric acid; • composition of freshly nucleated particles. Fifty six scientists attended the conference. They included 27 senior scientists, 9 younger independent scientists (assistant professor or young associate professor level), 7 postdocs, 13 graduate students, 10 women, 35 North Americans (34 from the U.S.), 1 Asian, and 20 Europeans. This was an excellent informal workshop on an important topic. An effort was made to include individuals from communities that do not regularly interact. A number of participants have provided informal feedback indicating that the workshop led to research ideas and possible future collaborations.

  19. Deposition of Aerosol Particles in Electrically Charged Membrane Filters

    International Nuclear Information System (INIS)

    A theory for the influence of electric charge on particle deposition on the surface of charged filters has been developed. It has been tested experimentally on ordinary membrane filters and Nuclepore filters of 8 μm pore size, with a bipolar monodisperse test aerosol of 1 μm particle diameter, and at a filter charge up to 20 μC/m2. Agreement with theory was obtained for the Coulomb force between filter and particle for both kinds of filters. The image force between charged filter and neutral particles did not result in the predicted deposition in the ordinary membrane filter, probably due to lacking correspondence between the filter model employed for the theory, and the real filter. For the Nuclepore filter a satisfactory agreement with theory was obtained, also at image interaction

  20. Aerosol Retrieval and Atmospheric Correction Algorithms for EPIC

    Science.gov (United States)

    Wang, Y.; Lyapustin, A.; Marshak, A.; Korkin, S.; Herman, J. R.

    2011-12-01

    EPIC is a multi-spectral imager onboard planned Deep Space Climate ObserVatoRy (DSCOVR) designed for observations of the full illuminated disk of the Earth with high temporal and coarse spatial resolution (10 km) from Lagrangian L1 point. During the course of the day, EPIC will view the same Earth surface area in the full range of solar and view zenith angles at equator with fixed scattering angle near the backscattering direction. This talk will describe a new aerosol retrieval/atmospheric correction algorithm developed for EPIC and tested with EPIC Simulator data. This algorithm uses the time series approach and consists of two stages: the first stage is designed to periodically re-initialize the surface spectral bidirectional reflectance (BRF) on stable low AOD days. Such days can be selected based on the same measured reflectance between the morning and afternoon reciprocal view geometries of EPIC. On the second stage, the algorithm will monitor the diurnal cycle of aerosol optical depth and fine mode fraction based on the known spectral surface BRF. Testing of the developed algorithm with simulated EPIC data over continental USA showed a good accuracy of AOD retrievals (10-20%) except over very bright surfaces.

  1. Forecasting of aerosol extinction of the sea and coastal atmosphere surface layer

    Science.gov (United States)

    Kaloshin, G. A.

    2010-04-01

    The focus of our study is the extinction and optical effects due to aerosol in a specific coastal region. The aerosol microphysical model of the marine and coastal atmosphere surface layer is considered. The model is made on the basis of the long-term experimental data received at researches of aerosol sizes distribution function (dN/dr) in the band particles sizes in 0.01 - 100 μk. The model is developed by present time for the band of heights is 0 - 25 m. Bands of wind speed is 3 - 18 km/s, sizes fetch is up to 120 km, RH = 40 - 98 %. Key feature of model is parameterization of amplitude and width of the modes as functions of fetch and wind speed. In the paper the dN/dr behavior depending at change meteorological parameters, heights above sea level, fetch (X), wind speed (U) and RH is show. On the basis of the developed model with usage of Mie theory for spheres the description of last version of developed code MaexPro (Marine Aerosol Extinction Profiles) for spectral profiles of aerosol extinction coefficients α(λ) calculations in the wavelength band, equal λ = 0.2 - 12 μm is presented. The received results are compared models NAN and ANAM. Also α(λ) profiles for various wind modes (combinations X and U) calculated by MaexPro code are given. The calculated spectrums of α(λ) profiles are compared with experimental data of α(λ) received by a transmission method in various geographical areas.

  2. Response of an aerosol mass spectrometer to organonitrates and organosulfates and implications for atmospheric chemistry.

    Science.gov (United States)

    Farmer, D K; Matsunaga, A; Docherty, K S; Surratt, J D; Seinfeld, J H; Ziemann, P J; Jimenez, J L

    2010-04-13

    Organonitrates (ON) are important products of gas-phase oxidation of volatile organic compounds in the troposphere; some models predict, and laboratory studies show, the formation of large, multifunctional ON with vapor pressures low enough to partition to the particle phase. Organosulfates (OS) have also been recently detected in secondary organic aerosol. Despite their potential importance, ON and OS remain a nearly unexplored aspect of atmospheric chemistry because few studies have quantified particulate ON or OS in ambient air. We report the response of a high-resolution time-of-flight aerosol mass spectrometer (AMS) to aerosol ON and OS standards and mixtures. We quantify the potentially substantial underestimation of organic aerosol O/C, commonly used as a metric for aging, and N/C. Most of the ON-nitrogen appears as NO(x)+ ions in the AMS, which are typically dominated by inorganic nitrate. Minor organonitrogen ions are observed although their identity and intensity vary between standards. We evaluate the potential for using NO(x)+ fragment ratios, organonitrogen ions, HNO(3)+ ions, the ammonium balance of the nominally inorganic ions, and comparison to ion-chromatography instruments to constrain the concentrations of ON for ambient datasets, and apply these techniques to a field study in Riverside, CA. OS manifests as separate organic and sulfate components in the AMS with minimal organosulfur fragments and little difference in fragmentation from inorganic sulfate. The low thermal stability of ON and OS likely causes similar detection difficulties for other aerosol mass spectrometers using vaporization and/or ionization techniques with similar or larger energy, which has likely led to an underappreciation of these species. PMID:20194777

  3. Natural versus anthropogenic inhalable aerosol chemistry of transboundary East Asian atmospheric outflows into western Japan.

    Science.gov (United States)

    Moreno, Teresa; Kojima, Tomoko; Querol, Xavier; Alastuey, Andrés; Amato, Fulvio; Gibbons, Wes

    2012-05-01

    The eastward transport of aerosols exported from mainland Asia strongly influences air quality in the Japanese archipelago. The bulk of the inhalable particulate matter (PM(10)) in these intrusions comprises either natural, desert-derived minerals (mostly supermicron silicates) or anthropogenic pollutants (mostly submicron sulphates), in various states of mixing. We analyse PM(10) collected in Kumamoto, SW Japan, during three contrasting types of aerosol intrusions, the first being dominated by desert PM which became increasingly mixed with anthropogenic components as time progressed, the second being a relatively minor event mixing fine, distal desert PM with anthropogenic materials, and the third being dominated by anthropogenic pollutants. Whereas the chemistry of the natural mineral component is characterised by "crustal" elements (Si, Al, Fe, Mg, K, Li, P, Sc, V, Rb, Sr, Zr, Th, lanthanoids), the anthropogenic component is rich in secondary inorganic compounds and more toxic metallic elements (NH(4)(+), SO(4)(2-), As, Pb, Cd, Cu, Zn, Sn, Bi, Sb, and Ge). Some desert-dust (Kosa) intrusions are more calcareous than others, implicating geologically different source areas, and contain enhanced levels of NO(3)(-), probably as supermicron Ca(NO(3))(2) particles produced by chemical reaction between NOx pollutants (mostly from industry and traffic) and carbonate during atmospheric transport. The overall trace element chemistry of aerosol intrusions into Kumamoto shows low V/Rb, low NO(3)(-)/SO(4)(2-), enhanced As levels, and unfractionated La/Ce values, which are all consistent with anthropogenic sources including coal emissions rather than those derived from the refining and combustion of oil fractionates. Geographically dispersed, residual sulphatic plumes of this nature mix with local traffic (revealed by OC and EC concentrations) and industrial emissions and dissipate only slowly, due to the dominance of submicron accumulation mode PM which is atmospherically

  4. A critical evaluation of proxy methods used to estimate the acidity of atmospheric particles

    Directory of Open Access Journals (Sweden)

    C. J. Hennigan

    2014-11-01

    Full Text Available Given significant challenges with available measurements of aerosol acidity, proxy methods are frequently used to estimate the acidity of atmospheric particles. In this study, four of the most common aerosol acidity proxies are evaluated and compared: (1 the ion balance method, (2 the molar ratio method, (3 thermodynamic equilibrium models, and (4 the phase partitioning of ammonia. All methods are evaluated against predictions of thermodynamic models and against direct observations of aerosol-gas equilibrium partitioning acquired in Mexico City during the MILAGRO study. The ion balance and molar ratio methods assume that any deficit in inorganic cations relative to anions is due to the presence of H+; and that a higher H+ loading and lower cation/anion ratio both correspond to increasingly acidic particles (i.e., lower pH. Based on the MILAGRO measurements, no correlation is observed between H+ levels inferred with the ion balance and aerosol pH predicted by the thermodynamic models and ammonia–ammonium (NH3–NH4+ partitioning. Similarly, no relationship is observed between the cation / anion molar ratio and predicted aerosol pH. Using only measured aerosol chemical composition as inputs without any constraint for the gas phase, the Extended Aerosol Inorganics Model (E-AIM and ISORROPIA-II thermodynamic equilibrium models tend to predict aerosol pH levels that are inconsistent with the observed NH3–NH4+ partitioning. The modeled pH values from both models run with gas + aerosol inputs agreed well with the aerosol pH predicted by the phase partitioning of ammonia. It appears that (1 thermodynamic models constrained by gas + aerosol measurements, and (2 the phase partitioning of ammonia provide the best available predictions of aerosol pH. Furthermore, neither the ion balance nor the molar ratio can be used as surrogates for aerosol pH, and published studies to date with conclusions based on such acidity proxies may need to be reevaluated

  5. Possible effect of strong solar energetic particle events on polar stratospheric aerosol: a summary of observational results

    International Nuclear Information System (INIS)

    This letter presents a summary of a phenomenological study of the response of the polar stratosphere to strong solar energetic particle (SEP) events corresponding to ground level enhancements (GLEs) of cosmic rays. This work is focused on evaluation of the possible influence of the atmospheric ionization caused by SEPs upon formation of aerosol particles in the stratosphere over polar regions. Following case studies of two major SEP/GLE events, in January 2005 and September 1989, and their possible effects on polar stratospheric aerosols, we present here the results of an analysis of variations of the daily profiles of the stratospheric aerosol parameters (aerosol extinction for different wavelengths, as well as Ångstrom exponent) for both polar hemispheres during SEP/GLE events of July 2000, April 2001 and October 2003, which form already five clear cases corresponding to extreme and strong SEP/GLE events. The obtained results suggest that an enhancement of ionization rate by a factor of about two in the polar region with night/cold/winter conditions can lead to the formation/growing of aerosol particles in the altitude range of 10–25 km. We also present a summary of the investigated effects based on the phenomenological study of the atmospheric application of extreme SEP events. (paper)

  6. Heterogeneous nucleation as a potential sulphate-coating mechanism of atmospheric mineral dust particles and implications of coated dust on new particle formation

    OpenAIRE

    Korhonen, H.; Napari, I.; Timmreck, C.; Vehkamaki, H.; Pirjola, L.; Lehtinen, K.; Lauri, A.; Kulmala, M.

    2003-01-01

    The plausibility of heterogeneous conucleation of water, sulphuric acid, and ammonia as a pathway leading to soluble coating of atmospheric mineral dust is investigated. In addition, the effect of such sulphate-coated dust on the formation and growth of atmospheric aerosol particles is addressed. The simulated new particle formation mechanism is ternary nucleation of water, sulphuric acid, and ammonia vapors, while in the condensational growth process the effect of condensable organic vapor i...

  7. Semicontinuous automated measurement of organic carbon in atmospheric aerosol samples.

    Science.gov (United States)

    Lu, Chao; Rashinkar, Shilpa M; Dasgupta, Purnendu K

    2010-02-15

    A fully automated measurement system for ambient aerosol organic carbon, capable of unattended operation over extended periods, is described. Particles are collected in a cyclone with water as the collection medium. The collected sample is periodically aspirated by a syringe pump into a holding loop and then delivered to a wet oxidation reactor (WOR). Acid is added, and the WOR is purged to measure dissolved CO(2) or inorganic carbonates (IC) as evolved CO(2). The IC background can often be small and sufficiently constant to be corrected for, without separate measurement, by a blank subtraction. The organic material is now oxidized stepwise or in one step to CO(2). The one-step oxidation involves UV-persulfate treatment in the presence of ozone. This treatment converts organic carbon (OC) to CO(2), but elemental carbon is not oxidized. The CO(2) is continuously purged from solution and collected by two sequential miniature diffusion scrubbers (DSs), a short DS preceding a longer one. Each DS consists of a LiOH-filled porous hydrophobic membrane tube with terminal stainless steel tubes that function as conductance-sensing electrodes. As CO(2) is collected by the LiOH-filled DSs, hydroxide is converted into carbonate and the resulting decrease in conductivity is monitored. The simultaneous use of the dual short and long DS units bearing different concentrations of LiOH permits both good sensitivity and a large dynamic range. The limit of detection (LOD, S/N = 3) is approximately 140 ng of C. With a typical sampling period of 30 min at a sampling rate of 30 L/min, this corresponds to an LOD of 160 ng/m(3). The approach also provides information on the ease of oxidation of the carbonaceous aerosol and hence the nature of the carbon contained therein. Ambient aerosol organic carbon data are presented. PMID:20092351

  8. Radiosonde aerosol counter for vertical profiling of atmospheric dust layers

    Science.gov (United States)

    Ulanowski, Z.; Hirst, E.; Kaye, P. H.; Harrison, R. G.; Nicoll, K. A.; Rogers, G.

    2010-05-01

    A low-cost, miniature aerosol particle counter has been developed, intended for use with balloon-borne meteorological radiosondes. It is particularly suitable for airborne mineral dust measurements. Ambient air is drawn into the counter using a diaphragm pump at a rate of 0.5 litre per minute. The counter detects particles in the airstream using a diode laser and a photodiode. Output from the photodiode is digitised into 5 size bins, with minimum particle diameters equivalent to 0.6, 1.4, 2.6, 5.4 and 10.6 micrometers. The counter is interfaced to a Vaisala RS92 radiosonde, which transmits data from the counter together with meteorological parameters and GPS-derived position to a ground based receiver at 1 Hz rate. Statistically significant particle size distributions can be obtained once a second for number concentrations down to about 100,000 particle per litre (within the measured size range), or correspondingly less at lower temporal resolutions. At the same time, the counter is capable of measuring dust number concentrations exceeding a million per litre without incurring significant errors. Soundings during the DREAME campaign in Kuwait (Ulanowski et al. EGU 2010, AS4.7) and on Cape Verde Islands (Nicoll et al. EGU 2010, AS4.7) provided dust concentration profiles with a typical vertical resolution of 4 m. Comparisons with integrated dust column size distribution measurements from AERONET sun photometers showed good agreement in two out of three cases where near-simultaneous retrievals were available. Optical thickness calculations based on the size distributions measured in Kuwait, with the assumption that the dust particles were prolate spheroids, agreed with the AERONET optical thickness at 675 nm to within 15%.

  9. Atmospheric pollution in the mediterranean area: geochemical studies of aerosols and rain waters

    International Nuclear Information System (INIS)

    It is now recognised that the atmosphere is a major pathway for the transport of material to the oceans. The material in the atmosphere is present as gaseous and particulate (aerosol) phases. Aerosols may be removed from the atmosphere by a combination of 'dry' (i.e. not involving an atmospheric aqueous phase) and 'wet' (precipitation scavenging) processes. Thus, aerosols are intimately related to rain waters, and interactions between the two are discusses below in relation to the input of material to the Mediterranean Sea

  10. Small molecules as tracers in atmospheric secondary organic aerosol

    Science.gov (United States)

    Yu, Ge

    Secondary organic aerosol (SOA), formed from in-air oxidation of volatile organic compounds, greatly affects human health and climate. Although substantial research has been devoted to SOA formation and evolution, the modeled and lab-generated SOA are still low in mass and degree of oxidation compared to ambient measurements. In order to compensate for these discrepancies, the aqueous processing pathway has been brought to attention. The atmospheric waters serve as aqueous reaction media for dissolved organics to undergo further oxidation, oligomerization, or other functionalization reactions, which decreases the vapor pressure while increasing the oxidation state of carbon atoms. Field evidence for aqueous processing requires the identification of tracer products such as organosulfates. We synthesized the standards for two organosulfates, glycolic acid sulfate and lactic acid sulfate, in order to measure their aerosol-state concentration from five distinct locations via filter samples. The water-extracted filter samples were analyzed by LC-MS. Lactic acid sulfate and glycolic acid sulfate were detected in urban locations in the United States, Mexico City, and Pakista