WorldWideScience

Sample records for astm committee e-24

  1. 47 CFR 90.379 - ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard).

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard... Communications Service (dsrcs) § 90.379 ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard). Roadside Units... incorporated by reference: American Society for Testing and Materials (ASTM) E2213-03, “Standard Specification...

  2. Data development for ASTM E24.06.02 round robin program on instability prediction

    Science.gov (United States)

    Mccabe, D. E.

    1979-01-01

    Basis data for use in an ASTM E24.06.02 task group round robin activity was developed. Compact specimens were made of 2024-T351, 7075-T651 aluminum alloys, and 304 stainless steel. All were 12.7 mm thick and planar dimension variables incorporated were for 1T, 2T and 4T sizes. Representative raw data for each material and specimen size are contained herein. R-curves plotted in terms of delta a physical and delta a effective are plotted for each material.

  3. ASTM Committee D-7 : Wood : promoting safety and standardization for 100 years

    Science.gov (United States)

    David W. Green; Robert L. Ethington

    2004-01-01

    In October 2004, Committee D-7 on Wood of the American Society for Testing and Materials (ASTM) is celebrating 100 years of contributions to the safe and efficient use of wood as a building material. Born during a period of rapid social, economic, and technological change, the Committee faced controversial issues and the challenge of a changing forest resource. This...

  4. ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics-Three Decades of High-Quality, Technically-Rigorous Normalization

    Science.gov (United States)

    Jenkins, Michael G.; Salem, Jonathan A.

    2016-01-01

    Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high-quality, technically-rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards contain testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards are used to generate accurate, reliable, repeatable and complete data. Within Committee C28, users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, 50 standards since the Committee's founding in 1986. This paper provides a detailed retrospective of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of standards for advanced ceramics to demonstrate their practical applications.

  5. ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics, Three Decades of High-quality, Technically-rigorous Normalization

    Science.gov (United States)

    Jenkins, Michael G.; Salem, Jonathan A.

    2016-01-01

    Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high quality, rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards provide accurate, reliable, repeatable and complete data. Within Committee C28 users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, nearly 50 standards since the Committees founding in 1986. This paper provides a retrospective review of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of advanced ceramics standards to demonstrate their practical applications.

  6. ASTM standards associated with PWR and BWR power plant licensing, operation and surveillance

    International Nuclear Information System (INIS)

    McElroy, W.N.; McElroy, R.J.; Gold, R.; Lippincott, E.P.; Lowe, A.L. Jr.

    1994-01-01

    This paper considers ASTM Standards that are available, under revision, and are being considered in support of Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR) Nuclear Power Plant (NPP) licensing, regulation, operation, surveillance and life attainment. The current activities of ASTM Committee E10 and its Subcommittees E10.02 and current activities of ASTM Committee E10 and its Subcommittees E10.02 and E10.05 and their Task Groups (TG) are described. A very important aspect of these efforts is the preparation, revision, and balloting of standards identified in the ASTM E706 Standard on Master Matrix for Light Water Reactor (LWR) Pressure Vessel (PV) Surveillance Standards. The current version (E706-87) of the Master Matrix identifies 21 ASTM LWR physics-dosimetry-metallurgy standards for Reactor Pressure Vessel (RPV) and Support Structure (SS) surveillance programs, whereas, for the next revision 34 standards are identified. The need for national and international coordination of Standards Technology Development, Transfer and Training (STDTT) is considered in this and other Symposium papers that address specific standards related physics-dosimetry-metallurgy issues. 69 refs

  7. 47 CFR 95.1509 - ASTM E2213-03 DSRC Standard.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false ASTM E2213-03 DSRC Standard. 95.1509 Section 95... ASTM E2213-03 DSRC Standard. On-Board Units operating in the 5850-5925 MHz band shall comply with the... Materials (ASTM) E2213-03, Standard Specification for Telecommunications and Information Exchange Between...

  8. The role of the American Society for Testing and Materials (ASTM) in providing standards to support reliability technology for nuclear power plants

    International Nuclear Information System (INIS)

    Steele, L.E.

    1978-01-01

    ASTM is an international society for managing the development of standards on characteristics and performance of materials, products, systems and services and the promotion of related knowledge. This paper provides on overview of ASTM, emphasizing its contribution to nuclear systems reliability. In so doing, the author, from his perspective as chairman of ASTM committee E 10 on ''Nuclear Applications and the Measurement of Radiation Effects and the Committee on Standards'', illustrates ASTM contributions to the understanding and control of radiation embrittlement of light-water reactor pressure vessels. Four major related taks are summarized and pertinent standards identified. These include: (1) surveillance practice (5 standards), (2) neutron dosimetry (8 standards), (3) specification for steels for nuclear service (7 standards) and (4) basic guidelines for thermal annealing to correct radiation embrittlement (1 standard). This illustration, a specific accomplishment using ASTM standards, is cited within the context of the broader nuclear-related activities of ASTM. (author)

  9. Standard guide for high-resolution gamma-ray spectrometry of soil samples. ASTM standard

    International Nuclear Information System (INIS)

    1998-12-01

    This guide is under the jurisdiction of ASTM Committee C-26 on Nuclear Fuel Cycle and is the direct responsibility of Subcommittee C26.05 on Methods of Test. The current edition was approved on Jul. 10, 1998. It was published in December 1998. Copyright American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA, 19428, USA. This document is available from NTIS under license from ASTM

  10. Analysis and evaluation of the Electronic Health Record standard in China: a comparison with the American national standard ASTM E 1384.

    Science.gov (United States)

    Xu, Wei; Guan, Zhiyu; Cao, Hongxin; Zhang, Haiyan; Lu, Min; Li, Tiejun

    2011-08-01

    To analyze and evaluate the newly issued Electronic Health Record (EHR) Architecture and Data Standard of China (Chinese EHR Standard) and identify areas of improvement for future revisions. We compared the Chinese EHR Standard with the standard of the American Society for Testing and Materials Standard Practice for Content and Structure of Electronic Health Records in the United States (ASTM E 1384 Standard). The comparison comprised two steps: (1) comparing the conformance of the two standards to the international standard: Health Informatics-Requirements for an Electronic Health Record Architecture (ISO/TS 18308), and showing how the architectures of the two standards satisfy or deviate from the ISO requirements and (2) comparing the detailed data structures between the two standards. Of the 124 requirement items in ISO/TS 18308, the Chinese EHR Standard and the ASTM E 1384 Standard conformed to 77 (62.1%) and 111 (89.5%), respectively. The Chinese EHR Standard conformed to 34 of 50 Structure requirements (68.0%), 22 of 24 Process requirements (91.7%), and 21 of 50 Other requirements (42.0%). The ASTM E 1384 Standard conformed to 49 of 50 Structure requirements (98.0%), 23 of 24 Process requirements (95.8%), and 39 of 40 Other requirements (78.0%). Further development of the Chinese EHR Standard should focus on supporting privacy and security mechanism, diverse data types, more generic and extensible lower level data structures, and relational attributes for data elements. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  11. Standard practice for application of thermoluminescence-dosimetry (TLD) systems for determining absorbed dose in radiation-hardness testing of electronic devices. ASTM standard

    International Nuclear Information System (INIS)

    1998-05-01

    This practice is under the jurisdiction of ASTM Committee E-10 on Nuclear Technology and Applications and is the direct responsibility of Subcommittee E10.07 on Radiation Dosimetry for Radiation Effects on Materials and Devices. Current edition approved Jun. 10, 1997. Published May 1998. Originally published as E 668-78. Last previous edition E 668-93

  12. Developing the (ASTM) voluntary consensus standards required to help implement the National Energy Plan

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The recommended guide is the first American Society for Testing and Materials (ASTM) matrix in a family of such documents that combined, will help manage the development of the ASTM standards considered necessary to implement the current National Plan for Energy Research, Development, and Demonstration. It is expected that the guide will provide a framework for standards development to complement the nation's research and development in support of critical energy needs. The recommended guide identifies the energy-critical areas that are to be developed, the master ASTM recommended guide for developing the standards required to help the National Plan, the section in which each energy-critical area is covered, and the suggested ASTM lead committee responsible for each area (fossil, solar, geothermal, conservation, fusion, and fission reactor development). A comprehensive matrix to identify the areas of need for which ASTM standards will be required to help implement the National Energy Plan is also presented

  13. ASTM reference radiologic digital image standards

    International Nuclear Information System (INIS)

    Wysnewski, R.; Wysnewski, D.

    1996-01-01

    ASTM Reference Radiographs have been essential in defining industry's material defect grade levels for many years. ASTM Reference Radiographs are used extensively as even the American Society for Metals Nondestructive Inspection and Quality Control Metals Handbook, Volume 11, eighth edition refers to ASTM Standard Reference Radiographs. The recently published E 1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds is a prime example of the on-going need for these references. To date, 14 Standard Reference Radiographs have been published to characterize material defects. Standard Reference Radiographs do not adequately address film-less radiologic methods. There are differences in mediums to content with. On a computer CRT defect indications appear differently when compared to indications viewed in a radiograph on a view box. Industry that uses non-film radiologic methods of inspection can be burdened with additional time and money developing internal standard reference radiologic images. These references may be deemed necessary for grading levels of product defects. Because there are no ASTM Standard Reference Radiologic data files for addressing this need in the industry, the authors of this paper suggested implementing a method for their creation under ASTM supervision. ASTM can assure continuity to those users making the transition from analog radiographic images to digital image data by swiftly addressing the requirements for reference digital image standards. The current status and possible future activities regarding a method to create digital data files is presented in this paper summary

  14. A new method to determine J0-integral values (ASTM E 813) without any auxiliary equipment

    International Nuclear Information System (INIS)

    Ullrich, G.; Krompholz, K.

    1987-01-01

    In this contribution the path independent J-integral according to J.R. Rice, respective J.D. Landes and J.A. Begley due to ASTME 813 is calculated by the product J pl = d v J el for 3 point bend type specimen. Here d v is the load point displacement up to the point of the onset of stable crack growth V, which is taken from the load versus load point displacement diagram and J el a value which is equivalent to K 2 /E, where K is the stress intensity factor (ASTME 399) and E is Young's modulus. The advantage of the new procedure is the simplicity of the test arrangement and of the evaluation with the determination of initiation point V without computer or other auxiliary equipment. (orig.) [de

  15. 29 CFR 525.24 - Advisory Committee on Special Minimum Wages.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Advisory Committee on Special Minimum Wages. 525.24 Section 525.24 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR... Special Minimum Wages. The Advisory Committee on Special Minimum Wages, the members of which are appointed...

  16. Overview (this manuscript is an overview of an ASTM ...

    Science.gov (United States)

    The Symposium on Developing Consensus Standards for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation was held on April 30th and May 1, 2015. Sponsored by ASTM Committee D22 on Air Quality, the symposium was held in Anaheim, CA, in conjunction with the standards development meetings of the Committee. ASTM D22.05 is developing tools to answer fundamental questions: what is emitted from SPF, how long do the emissions persist, how does ventilation impact concentrations and potential exposures? How can we model these processes to address the multiplicity of products, applications, and environmental conditions that may impact exposure to emissions over the life cycle of the material? These are complex and interrelated questions that have challenged the indoor environments research community for many years. Objectives of Symposium: Standardized methods are needed to assess the potential impacts of SPF insulation products on indoor air quality, establish re-entry times for trade workers or re-occupancy times for building occupants after product installation and to evaluate post-occupancy ventilation. The objective of the symposium was to provide a forum for the exchange of ideas from SPF manufacturers, regulatory agencies, indoor air quality professionals, testing labs, air quality consultants, instrument vendors and other stakeholders. Following the presentations on the current status of measuring emissions from SPF insulation, participants di

  17. DEVELOPING STANDARDS FOR ASSESSING ENVIRONMENTAL CHEMICAL, PHYSICAL, AND BIOLOGICAL STRESSORS THROUGH ASTM COMMITTEE E47: A PAST FOUNDATION OF PROVEN STANDARDS, A FUTURE OF GREAT POTENTIAL AND OPPORTUNITY

    Science.gov (United States)

    Development of standards associated with assessing the bioavailability of contaminants in sediment will be used as a case study for how standards have been developed through Committee E47. In 1987, Committee E47 established Subcommittee E47.03 on Sediment Assessment and Toxicity....

  18. Impact of ASTM Standard E722 update on radiation damage metrics

    Energy Technology Data Exchange (ETDEWEB)

    DePriest, Kendall Russell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-06-01

    The impact of recent changes to the ASTM Standard E722 is investigated. The methodological changes in the production of the displacement kerma factors for silicon has significant impact for some energy regions of the 1-MeV(Si) equivalent fluence response function. When evaluating the integral over all neutrons energies in various spectra important to the SNL electronics testing community, the change in the response results in an increase in the total 1-MeV(Si) equivalent fluence of 2 7%. Response functions have been produced and are available for users of both the NuGET and MCNP codes.

  19. Standard specification for tantalum and tantalum alloy plate, sheet, and strip. ASTM standard

    International Nuclear Information System (INIS)

    1998-09-01

    This specification is under the jurisdiction of ASTM Committee B-10 on Reactive and Refractory Metals and Alloys and is the direct responsibility of Subcommittee B10.03 on Niobium and Tantalum. Current edition approved May 10, 1998 and published September 1998. Originally published as B 708-82. Last previous edition was B 708-92

  20. The USCG/environment Canada/ASTM standards development program

    International Nuclear Information System (INIS)

    Whittaker, H.

    1992-01-01

    Environment Canada's Emergencies Engineering Division (EED) has been charged, as a result of the Public Review Panel on Tanker Safety and Marine Emergency Response report, with increased R ampersand D in marine oil spills. This activity will, of necessity, include development of standards and guidelines for the testing and/or usage of oil spill cleanup equipment. The United States Coast Guard (USCG) has been charged with implementing the provisions of the Oil Pollution Act of 1990 (OPA-90), as it pertains to marine transportation vessels and facilities. Among the provisions are requirements for vessel and facility owners and operators to develop comprehensive response plans that specifically match response resources to spill removal requirements. Meeting the response plan provisions of OPA-90 requires common standards for testing, selecting and assigning resources to anticipated response needs and objectively evaluating response plans for adequacy. In August of 1991, the USCG OPA-90 office approached ASTM to determine the feasibility of developing standards through that organizations procedures. Meetings were then held between the OPA-90 staff and members of the ASTM Committee F-20 on Hazardous Substances and Oil Spill Response. An agreement was reached to commence standards development in the areas of: Barriers, Skimmers, Treating Agents, Pumps, Beach Clean-up, Sorbents, Bioremediation, In-situ Burning, Temporary Storage Devices, Communications, Remote Sensing. It was recognized that ASTM and other organizational standards existed in several of these areas, but there were those where none were known to exist. Standards development was, therefore, expected to be a complicated and time-consuming process. Both the USCG OPA-90 and EC/EED offices required standards to be developed quickly, without subverting the ASTM process. Mechanical containment and recovery was considered to be the primary area of concern for both groups

  1. Status on the selection and development of an embrittlement trend curve to use in ASTM standard guide E900

    International Nuclear Information System (INIS)

    Kirk, M.; Brian Hall, J.; Server, W.; Lucon, E.; Erickson, M.; Stoller, R.

    2015-01-01

    ASTM E900-07, Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, includes an embrittlement trend curve. The trend curve can be used to predict the effect of neutron irradiation on the embrittlement of ferritic pressure vessel steels, as quantified by the shift in the Charpy V-Notch transition curve at 41 Joules of absorbed energy (ΔT 41J ). The current E900 trend curve was first adopted in the 2002 revision. In 2011 ASTM Subcommittee E10.02 undertook an extensive effort to evaluate the adequacy of the E900 trend curve for continued use. This paper summarizes the current status of this effort, which has produced a trend curve calibrated using a database of over 1800 ΔT 41J values from the light water reactor surveillance programs in thirteen countries. (authors)

  2. Summary: Update to ASTM guide E 1523 to charge control and charge referencing techniques in x-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Baer, D.R.

    2005-01-01

    An updated version of the American Society for Testing and Materials (ASTM) guide E 1523 to the methods to charge control and charge referencing techniques in x-ray photoelectron spectroscopy has been released by ASTM [Annual Book of ASTM Standards Surface Analysis (American Society for Testing and Materials, West Conshohocken, PA, 2004), Vol. 03.06]. The guide is meant to acquaint x-ray photoelectron spectroscopy (XPS) users with the various charge control and charge referencing techniques that are and have been used in the acquisition and interpretation of XPS data from surfaces of insulating specimens. The current guide has been expanded to include new references as well as recommendations for reporting information on charge control and charge referencing. The previous version of the document had been published in 1997 [D. R. Baer and K. D. Bomben, J. Vac. Sci. Technol. A 16, 754 (1998)

  3. 46 CFR 163.003-3 - ASTM standard.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false ASTM standard. 163.003-3 Section 163.003-3 Shipping...: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-3 ASTM standard. The following standard of the American Society for Testing and Materials (ASTM) is incorporated by reference into this subpart: ASTM D...

  4. 24 CFR 3288.305 - Consultation with the Manufactured Housing Consensus Committee.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Consultation with the Manufactured Housing Consensus Committee. 3288.305 Section 3288.305 Housing and Urban Development Regulations Relating... Housing Consensus Committee. HUD will seek input from the MHCC when revising the HUD Manufactured Home...

  5. Application of ASTM E-1559 Apparatus to Study H2O Desorption

    Science.gov (United States)

    Woronowicz, Michael; Perry, Radford, III; Meadows, George A.

    2015-01-01

    The NASA James Webb Space Telescope project identified a need to measure water vapor desorption from cryogenic surfaces in order to validate predictions of spacecraft design performance. A review of available scientific literature indicated no such measurements had been reported below 131 K. Contamination control personnel at NASA Goddard Space Flight Center recognized the possibility they readily possessed the means to collect these measurements at lower temperatures using an existing apparatus commonly employed for making outgassing observations. This presentation will relate how the ASTM E-1559 Molekit apparatus was used without physical modification to measure water vapor sublimation down to 120 K and compare this data to existing equilibrium vapor pressure models.

  6. Standard test method for compressive strength of grouts for preplaced-aggregate concrete in the laboratory. ASTM standard

    International Nuclear Information System (INIS)

    1998-10-01

    DoD adopted. This test method is under the jurisdiction of ASTM Committee C-9 on Concrete and Concrete Aggregates and is the direct responsibility of Subcommittee C09.41 on Concrete for Radiation Shielding. Current edition approved Feb. 10, 1986 and published October 1998. Originally published as C 942-81. Last previous edition was C 942-86(1991)

  7. Standard test method for static leaching of monolithic waste forms for disposal of radioactive waste. ASTM standard

    International Nuclear Information System (INIS)

    1998-10-01

    This test method is under the jurisdiction of ASTM Committee C-26 on Nuclear Fuel Cycles and is the direct responsibility of Subcommittee C26.07 on Waste Materials. The current edition was approved July 10, 1998, and published in October 1998. It was originally published as C 1220-92. The last previous edition was C 1220-92

  8. 24 CFR 3286.15 - Consultation with the Manufactured Housing Consensus Committee (MHCC).

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Consultation with the Manufactured Housing Consensus Committee (MHCC). 3286.15 Section 3286.15 Housing and Urban Development Regulations... Consensus Committee (MHCC). The Secretary will seek input from the MHCC when revising the installation...

  9. Overview (this manuscript is an overview of an ASTM symposium. The authors, John Sebroski and Mark Mason, of the overview were the co-chairs of the symposium and co-editors of the manuscripts submitted for ASTM peer review and subsequent publication in the technical proceedings for the symposium)

    Science.gov (United States)

    The Symposium on Developing Consensus Standards for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation was held on April 30th and May 1, 2015. Sponsored by ASTM Committee D22 on Air Quality, the symposium was held in Anaheim, CA, in conjunction with the st...

  10. Integration of Nanofluids into Commercial Antifreeze Concentrates with ASTM D15 Corrosion Testing

    Science.gov (United States)

    2013-05-01

    Lockwood1 1 Valvoline New Product Development Laboratory, Ashland Consumer Markets , Lexington, Kentucky. 2 Tank Automotive Research, Development...Development Laboratory,Ashland Consumer Markets ,P.O. Box 14000,Lexington,KY,40512 8. PERFORMING ORGANIZATION REPORT NUMBER ; #23826 9. SPONSORING...Technology, Performance, and Life for Light-Duty Applications, Engine Coolant Testing: Fourth Volume, ASTM STP 1335, R.E. Beale ed., ASTM, Philadelphia

  11. Comparative study between EDXRF and ASTM E572 methods using two-way ANOVA

    Science.gov (United States)

    Krummenauer, A.; Veit, H. M.; Zoppas-Ferreira, J.

    2018-03-01

    Comparison with reference method is one of the necessary requirements for the validation of non-standard methods. This comparison was made using the experiment planning technique with two-way ANOVA. In ANOVA, the results obtained using the EDXRF method, to be validated, were compared with the results obtained using the ASTM E572-13 standard test method. Fisher's tests (F-test) were used to comparative study between of the elements: molybdenum, niobium, copper, nickel, manganese, chromium and vanadium. All F-tests of the elements indicate that the null hypothesis (Ho) has not been rejected. As a result, there is no significant difference between the methods compared. Therefore, according to this study, it is concluded that the EDXRF method was approved in this method comparison requirement.

  12. Results of ASTM round robin testing for mode 1 interlaminar fracture toughness of composite materials

    Science.gov (United States)

    Obrien, T. Kevin; Martin, Roderick H.

    1992-01-01

    The results are summarized of several interlaboratory 'round robin' test programs for measuring the mode 1 interlaminar fracture toughness of advanced fiber reinforced composite materials. Double Cantilever Beam (DCB) tests were conducted by participants in ASTM committee D30 on High Modulus Fibers and their Composites and by representatives of the European Group on Fracture (EGF) and the Japanese Industrial Standards Group (JIS). DCB tests were performed on three AS4 carbon fiber reinforced composite materials: AS4/3501-6 with a brittle epoxy matrix; AS4/BP907 with a tough epoxy matrix; and AS4/PEEK with a tough thermoplastic matrix. Difficulties encountered in manufacturing panels, as well as conducting the tests are discussed. Critical issues that developed during the course of the testing are highlighted. Results of the round robin testing used to determine the precision of the ASTM DCB test standard are summarized.

  13. Standard specification for cobalt-chromium-nickel-molybdenum-tungsten alloy (UNS R31233) plate, sheet and strip. ASTM standard

    International Nuclear Information System (INIS)

    1998-09-01

    This specification is under the jurisdiction of ASTM Committee B-2 on Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee B02.07 on Refined Nickel and Cobalt, and Alloys Containing Nickel or Cobalt or Both as Principal Constituents. Current edition approved Apr. 10, 1998 and published September 1998. Originally published as B 818-91. Last previous edition was B 818-93

  14. ASTM E 1559 method for measuring material outgassing/deposition kinetics has applications to aerospace, electronics, and semiconductor industries

    Science.gov (United States)

    Garrett, J. W.; Glassford, A. P. M.; Steakley, J. M.

    1994-01-01

    The American Society for Testing and Materials has published a new standard test method for characterizing time and temperature-dependence of material outgassing kinetics and the deposition kinetics of outgassed species on surfaces at various temperatures. This new ASTM standard, E 1559(1), uses the quartz crystal microbalance (QCM) collection measurement approach. The test method was originally developed under a program sponsored by the United States Air Force Materials Laboratory (AFML) to create a standard test method for obtaining outgassing and deposition kinetics data for spacecraft materials. Standardization by ASTM recognizes that the method has applications beyond aerospace. In particular, the method will provide data of use to the electronics, semiconductor, and high vacuum industries. In ASTM E 1559 the material sample is held in vacuum in a temperature-controlled effusion cell, while its outgassing flux impinges on several QCM's which view the orifice of the effusion cell. Sample isothermal total mass loss (TML) is measured as a function of time from the mass collected on one of the QCM's which is cooled by liquid nitrogen, and the view factor from this QCM to the cell. The amount of outgassed volatile condensable material (VCM) on surfaces at higher temperatures is measured as a function of time during the isothermal outgassing test by controlling the temperatures of the remaining QCM's to selected values. The VCM on surfaces at temperatures in between those of the collector QCM's is determined at the end of the isothermal test by heating the QCM's at a controlled rate and measuring the mass loss from the end of the QCM's as a function of time and temperature. This reevaporation of the deposit collected on the QCM's is referred to as QCM thermogravimetric analysis. Isothermal outgassing and deposition rates can be determined by differentiating the isothermal TML and VCM data, respectively, while the evaporation rates of the species can be obtained as a

  15. Interpreting the ASTM 'content standard for digital geospatial metadata'

    Science.gov (United States)

    Nebert, Douglas D.

    1996-01-01

    ASTM and the Federal Geographic Data Committee have developed a content standard for spatial metadata to facilitate documentation, discovery, and retrieval of digital spatial data using vendor-independent terminology. Spatial metadata elements are identifiable quality and content characteristics of a data set that can be tied to a geographic location or area. Several Office of Management and Budget Circulars and initiatives have been issued that specify improved cataloguing of and accessibility to federal data holdings. An Executive Order further requires the use of the metadata content standard to document digital spatial data sets. Collection and reporting of spatial metadata for field investigations performed for the federal government is an anticipated requirement. This paper provides an overview of the draft spatial metadata content standard and a description of how the standard could be applied to investigations collecting spatially-referenced field data.

  16. Modification of ASTM Standard E1681 on Environmental Cracking to Include Bolt-Load Specimen Testing

    National Research Council Canada - National Science Library

    Underwood, Jean D. M

    1997-01-01

    Benet Laboratories experience with environmental cracking of cannon components has been combined with the technical expertise of various participants at ASTM technical meetings and symposia to develop...

  17. Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development.

    Science.gov (United States)

    Bostelman, Roger; Hong, Tsai; Legowik, Steven

    2016-01-01

    Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems.

  18. ASTM standards for fire debris analysis: a review.

    Science.gov (United States)

    Stauffer, Eric; Lentini, John J

    2003-03-12

    The American Society for Testing and Materials (ASTM) recently updated its standards E 1387 and E 1618 for the analysis of fire debris. The changes in the classification of ignitable liquids are presented in this review. Furthermore, a new standard on extraction of fire debris with solid phase microextraction (SPME) was released. Advantages and drawbacks of this technique are presented and discussed. Also, the standard on cleanup by acid stripping has not been reapproved. Fire debris analysts that use the standards should be aware of these changes.

  19. Relation between the national handbook of recommended methods for water data acquisition and ASTM standards

    Science.gov (United States)

    Glysson, G. Douglas; Skinner, John V.

    1991-01-01

    In the late 1950's, intense demands for water and growing concerns about declines in the quality of water generated the need for more water-resources data. About thirty Federal agencies, hundreds of State, county and local agencies, and many private organizations had been collecting water data. However, because of differences in procedures and equipment, many of the data bases were incompatible. In 1964, as a step toward establishing more uniformity, the Bureau of the Budget (now the Office of Management and Budget, OMB) issued 'Circular A-67' which presented guidelines for collecting water data and also served as a catalyst for creating the Office of Water Data Coordination (OWDC) within the U.S. Geological Survey. This paper discusses past, present, and future aspects of the relation between methods in the National Handbook and standards published by ASTM (American Society for Testing and Materials) Committee D-19 on Water's Subcommittee D-19.07 on Sediment, Geomorphology, and Open Channel Flow. The discussion also covers historical aspects of standards - development work jointly conducted by OWDC and ASTM.

  20. An Experimental Copyright Moratorium: Study of a Proposed Solution to the Copyright Photocopying Problem. Final Report to the American Society for Testing and Materials (ASTM).

    Science.gov (United States)

    Heilprin, Laurence B.

    The Committee to Investigate Copyright Problems (CICP), a non-profit organization dedicated to resolving the conflict known as the "copyright photocopying problem" was joined by the American Society for Testing and Materials (ASTM), a large national publisher of technical and scientific standards, in a plan to simulate a long-proposed…

  1. Comparison of ASTM D613 and ASTM D6890

    Science.gov (United States)

    2016-04-01

    cetane values outside of the routine range of traditional CN testing by ASTM D613, this is an important advantage in fuel blending and disposition...Number testing. Particular emphasis was placed on evaluating fuels, and blends thereof, having cetane values outside of the normal range of the...interest covers both petroleum-based and synthetic-based, as well as blends thereof in order to improve the confidence in using DCN as a replacement

  2. Development of ASTM Standard for SiC-SiC Joint Testing Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, George [General Atomics, San Diego, CA (United States); Back, Christina [General Atomics, San Diego, CA (United States)

    2015-10-30

    As the nuclear industry moves to advanced ceramic based materials for cladding and core structural materials for a variety of advanced reactors, new standards and test methods are required for material development and licensing purposes. For example, General Atomics (GA) is actively developing silicon carbide (SiC) based composite cladding (SiC-SiC) for its Energy Multiplier Module (EM2), a high efficiency gas cooled fast reactor. Through DOE funding via the advanced reactor concept program, GA developed a new test method for the nominal joint strength of an endplug sealed to advanced ceramic tubes, Fig. 1-1, at ambient and elevated temperatures called the endplug pushout (EPPO) test. This test utilizes widely available universal mechanical testers coupled with clam shell heaters, and specimen size is relatively small, making it a viable post irradiation test method. The culmination of this effort was a draft of an ASTM test standard that will be submitted for approval to the ASTM C28 ceramic committee. Once the standard has been vetted by the ceramics test community, an industry wide standard methodology to test joined tubular ceramic components will be available for the entire nuclear materials community.

  3. An evaluation of efforts by nuclear power plants to use ASTM D3803-89

    International Nuclear Information System (INIS)

    Freeman, W.P.

    1995-01-01

    The number of nuclear power plants are now using ASTM D3803-89, open-quotes Standard Test Method for Nuclear-Grade Activated Carbonclose quotes for routine surveillance testing of adsorbents. In order to judge the impact of this change, we have gathered radioiodine removal test results from our data base on a system-by-system basis (i.e. control room, technical support center, and spent fuel pool) and compared test results obtained for the same kind of systems using the new and older test methods. Included in this comparison are systems with and without humidity control. Results are discussed from the standpoint of what to expect if a change to testing using ASTM D3803-89 is contemplated, especially regarding test results in light existing acceptance criteria. Additionally, the results are discussed from the standpoint of the sensitivity of the ASTM test method to detect when the performance of the carbon in air cleaning systems has been compromised (compared to the older methods). Finally, we offer some suggestions for how other plants might upgrade their carbon testing to incorporate testing to ASTM D3803-89

  4. An evaluation of efforts by nuclear power plants to use ASTM D3803-89

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, W.P.

    1995-02-01

    The number of nuclear power plants are now using ASTM D3803-89, {open_quotes}Standard Test Method for Nuclear-Grade Activated Carbon{close_quotes} for routine surveillance testing of adsorbents. In order to judge the impact of this change, we have gathered radioiodine removal test results from our data base on a system-by-system basis (i.e. control room, technical support center, and spent fuel pool) and compared test results obtained for the same kind of systems using the new and older test methods. Included in this comparison are systems with and without humidity control. Results are discussed from the standpoint of what to expect if a change to testing using ASTM D3803-89 is contemplated, especially regarding test results in light existing acceptance criteria. Additionally, the results are discussed from the standpoint of the sensitivity of the ASTM test method to detect when the performance of the carbon in air cleaning systems has been compromised (compared to the older methods). Finally, we offer some suggestions for how other plants might upgrade their carbon testing to incorporate testing to ASTM D3803-89.

  5. Silicon Damage Response Function Derivation and Verification: Assessment of Impact on ASTM Standard E722

    Energy Technology Data Exchange (ETDEWEB)

    Depriest, Kendall [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-06-01

    Unsuccessful attempts by members of the radiation effects community to independently derive the Norgett-Robinson-Torrens (NRT) damage energy factors for silicon in ASTM standard E722-14 led to an investigation of the software coding and data that produced those damage energy factors. The ad hoc collaboration to discover the reason for lack of agreement revealed a coding error and resulted in a report documenting the methodology to produce the response function for the standard. The recommended changes in the NRT damage energy factors for silicon are shown to have significant impact for a narrow energy region of the 1-MeV(Si) equivalent fluence response function. However, when evaluating integral metrics over all neutrons energies in various spectra important to the SNL electronics testing community, the change in the response results in a small decrease in the total 1- MeV(Si) equivalent fluence of ~0.6% compared to the E722-14 response. Response functions based on the newly recommended NRT damage energy factors have been produced and are available for users of both the NuGET and MCNP codes.

  6. Evaluation of ozonated water using ASTM E1174 for standardized testing of handwash formulations for healthcare personnel.

    Science.gov (United States)

    Nakamura, K; Saito, K; Kashiwazaki, J; Aoyagi, T; Arai, K; Hara, Y; Kobari, S; Mori, H; Ohashi, K; Takano, Y; Kaku, M; Kanemitsu, K

    2018-02-13

    Removal of bacteria by handwashing with ozonated water was evaluated using the ASTM E1174 standard test method. Thirty healthy volunteers were assigned randomly to three groups: ozonated water, antimicrobial soap and water, and non-antimicrobial soap and water. A 3 log 10  cfu reduction was achieved by washing hands with ozonated water or antimicrobial soap and water. However, ozonated water was not significantly superior to non-antimicrobial soap and water. Ozonated water may remove bacteria from the hands to at least a similar extent as that by non-antimicrobial soap and water in the absence of visible dirt or body fluid contamination. Copyright © 2018 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  7. ASTM lights the way for tissue engineered medical products standards: jump start for combination medical products that restore biological function of human tissues.

    Science.gov (United States)

    Picciolo, G L; Stocum, D L

    2001-01-01

    Everybody hopes for better health and restoration of impaired bodily function, and now that hope is illuminated by the promise of powerful biological tools that make human cells grow and replace human tissue. ASTM Committee F04 on Medical and Surgical Materials and Devices is taking the lead by defining some of those tools as standards that can be used for the development, production, testing, and regulatory approval of medical products.

  8. Fitting psychometric functions using a fixed-slope parameter: an advanced alternative for estimating odor thresholds with data generated by ASTM E679.

    Science.gov (United States)

    Peng, Mei; Jaeger, Sara R; Hautus, Michael J

    2014-03-01

    Psychometric functions are predominately used for estimating detection thresholds in vision and audition. However, the requirement of large data quantities for fitting psychometric functions (>30 replications) reduces their suitability in olfactory studies because olfactory response data are often limited (ASTM) E679. The slope parameter of the individual-judge psychometric function is fixed to be the same as that of the group function; the same-shaped symmetrical sigmoid function is fitted only using the intercept. This study evaluated the proposed method by comparing it with 2 available methods. Comparison to conventional psychometric functions (fitted slope and intercept) indicated that the assumption of a fixed slope did not compromise precision of the threshold estimates. No systematic difference was obtained between the proposed method and the ASTM method in terms of group threshold estimates or threshold distributions, but there were changes in the rank, by threshold, of judges in the group. Overall, the fixed-slope psychometric function is recommended for obtaining relatively reliable individual threshold estimates when the quantity of data is limited.

  9. Cor ASTM: um método simples e rápido para determinar a qualidade do biodiesel produzido a partir de óleos residuais de fritura ASTM color: a simple and fast method for determining quality of biodiesel produced from used cooking oils

    Directory of Open Access Journals (Sweden)

    Verônica Santos de Morais

    2013-01-01

    Full Text Available In this study, 23 biodiesel samples were produced, 20 from used cooking oil and the remaining 3 from refined soybean oil. The following properties were determined in all of the samples (oil and its respective biodiesel: density; viscosity; total acid number and ASTM color. The results indicated high correlation (R > 0.6 between ASTM color of used cooking oil and total acid number of its resultant biodiesel. This high correlation allows prediction of the quality of the biodiesel produced using a simple and fast procedure such as ASTM color.

  10. 76 FR 12370 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2011-03-07

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on February 4, 2011... seq. (``the Act''), ASTM International Standards (``ASTM'') has filed written notifications.... Specifically, ASTM has provided an updated list of current, ongoing ASTM standards activities originating...

  11. 78 FR 1884 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-01-09

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on December 12, 2012... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  12. 78 FR 35646 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-06-13

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on May 10, 2013, pursuant... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  13. 77 FR 34069 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2012-06-08

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on May 11, 2012, pursuant... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  14. 77 FR 61786 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2012-10-11

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on September 10, 2012... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  15. 78 FR 64248 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-10-28

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on September 16, 2013... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  16. 76 FR 34252 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; ASTM...

    Science.gov (United States)

    2011-06-13

    ... Production Act of 1993; ASTM International Standards Notice is hereby given that, on May 11, 2011, pursuant... seq. (``the Act''), ASTM International Standards (``ASTM'') has filed written notifications.... Specifically, ASTM has provided an updated list of current, ongoing ASTM standards activities originating...

  17. 78 FR 14836 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-03-07

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on February 11, 2013... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  18. Annual Book of ASTM Standards, Part 23: Water; Atmospheric Analysis.

    Science.gov (United States)

    American Society for Testing and Materials, Philadelphia, PA.

    Standards for water and atmospheric analysis are compiled in this segment, Part 23, of the American Society for Testing and Materials (ASTM) annual book of standards. It contains all current formally approved ASTM standard and tentative test methods, definitions, recommended practices, proposed methods, classifications, and specifications. One…

  19. 78 FR 16357 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-03-14

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development... hereby given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: April 24--8:30 a.m. to 4...

  20. 77 FR 1085 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2012-01-09

    ... Production Act of 1993--ASTM International Notice is hereby given that, on December 5, 2011, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  1. 75 FR 11196 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2010-03-10

    ... Production Act of 1993--ASTM International Notice is hereby given that, on February 16, 2010, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  2. 75 FR 65657 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2010-10-26

    ... Production Act of 1993--ASTM International Notice is hereby given that, on September 23, 2010, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  3. 76 FR 63658 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; ASTM International

    Science.gov (United States)

    2011-10-13

    ... Production Act of 1993; ASTM International Notice is hereby given that, on August 31, 2011, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  4. ASTM Standards for Reactor Dosimetry and Pressure Vessel Surveillance

    International Nuclear Information System (INIS)

    GRIFFIN, PATRICK J.

    1999-01-01

    The ASTM standards provide guidance and instruction on how to field and interpret reactor dosimetry. They provide a roadmap towards understanding the current ''state-of-the-art'' in reactor dosimetry, as reflected by the technical community. The consensus basis to the ASTM standards assures the user of an unbiased presentation of technical procedures and interpretations of the measurements. Some insight into the types of standards and the way in which they are organized can assist one in using them in an expeditious manner. Two example are presented to help orient new users to the breadth and interrelationship between the ASTM nuclear metrology standards. One example involves the testing of a new ''widget'' to verify the radiation hardness. The second example involves quantifying the radiation damage at a pressure vessel critical weld location through surveillance dosimetry and calculation

  5. 77 FR 14046 - Amended Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2012-03-08

    ... Research and Production Act of 1993--ASTM International Standards Notice is hereby given that, on February..., 15 U.S.C. 4301 et seq. (``the Act''), ASTM International Standards (``ASTM'') has filed written... circumstances. Specifically, ASTM has provided an updated list of current, ongoing ASTM standards activities...

  6. Characterization of ASTM round-robin tungsten-powder samples

    International Nuclear Information System (INIS)

    Slettevold, C.A.; Biermann, A.H.

    1975-01-01

    The Lawrence Livermore Laboratory Particle Characterization Laboratory Group has participated in an industry-wide round-robin investigation on characterization of tungsten powder. sponsored by the ASTM Subcommittee on Refractory-Metal Powders (B-09.3). The analyses performed at the suggestion of the ASTM subcommittee included measurements of tap density, apparent density, true density, average particle size, and surface area. Determinations of particle-weight and size distributions were also performed and particle inspection conducted by microscopy. This report describes the equipment and procedures used and summarizes the results of these analyses. (9 tables, 17 fig) (U.S.)

  7. Synthesis of (E-2,4-Dinitro-N-((2E,4E-4-phenyl-5-(pyrrolidin-1-ylpenta-2,4-dienylideneaniline

    Directory of Open Access Journals (Sweden)

    Mostafa Fesanghari

    2009-07-01

    Full Text Available (E-2,4-Dinitro-N-((2E,4E-4-phenyl-5-(pyrrolidin-1-ylpenta-2,4-dienylidene aniline dye was prepared in one pot by reaction of premade N-2,4-dinitrophenyl-3-phenylpyridinium chloride (DNPPC and pyrrolidine in absolute MeOH.

  8. Spectrophotometric determination of the ASTM color of diesel oil

    Energy Technology Data Exchange (ETDEWEB)

    Douglas Willian Emanuel Alves Santana; Marcelle Prates Sepulveda; Paulo Jorge Sanches Barbeira

    2007-03-15

    One of the parameters analyzed to determine the quality of diesel oil is its ASTM color. Changes in color may be indicative of problems in the production process, contamination, degradation or the oxidation of diesel. The methodology recommended for determining the color of automotive diesel oil samples is the colorimetry according to standard ASTM D1500, in which a sample is introduced into a glass cell and the color of the sample is compared with an optical filter color scale. Although it is very simple, the manual method requires good visual acuity from the operator. This procedure becomes somewhat subjective in some cases since different operators can make distinct evaluations of the same sample. In this way, this work proposes the development of a spectrophotometric analysis methodology to eliminate the subjectiveness in the determination of ASTM color of diesel oil samples by using operator-independent parameters and making quality assay more accurate and precise. Short communication. 7 refs., 2 figs., 2 tabs.

  9. Repeatability and Reproducibility of Compression Strength Measurements Conducted According to ASTM E9

    Science.gov (United States)

    Luecke, William E.; Ma, Li; Graham, Stephen M.; Adler, Matthew A.

    2010-01-01

    Ten commercial laboratories participated in an interlaboratory study to establish the repeatability and reproducibility of compression strength tests conducted according to ASTM International Standard Test Method E9. The test employed a cylindrical aluminum AA2024-T351 test specimen. Participants measured elastic modulus and 0.2 % offset yield strength, YS(0.2 % offset), using an extensometer attached to the specimen. The repeatability and reproducibility of the yield strength measurement, expressed as coefficient of variations were cv(sub r)= 0.011 and cv(sub R)= 0.020 The reproducibility of the test across the laboratories was among the best that has been reported for uniaxial tests. The reported data indicated that using diametrically opposed extensometers, instead of a single extensometer doubled the precision of the test method. Laboratories that did not lubricate the ends of the specimen measured yield stresses and elastic moduli that were smaller than those measured in laboratories that lubricated the specimen ends. A finite element analysis of the test specimen deformation for frictionless and perfect friction could not explain the discrepancy, however. The modulus measured from stress-strain data were reanalyzed using a technique that finds the optimal fit range, and applies several quality checks to the data. The error in modulus measurements from stress-strain curves generally increased as the fit range decreased to less than 40 % of the stress range.

  10. 75 FR 30440 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2010-06-01

    ... Production Act of 1993--ASTM International Notice is hereby given that, on May 6, 2010, pursuant to Section 6... Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the Attorney... recovery of antitrust plaintiffs to actual damages under specified circumstances. Specifically, ASTM has...

  11. Caracterização microestrutural de soldas dissimilares dos aços ASTM A-508 e AISI 316L Characterization of dissimilar metal weld between low alloy steel ASTM A-508 and 316L stainless steel

    Directory of Open Access Journals (Sweden)

    Luciana Iglésias Lourenço Lima

    2010-06-01

    Full Text Available As soldas dissimilares (dissimilar metal welds - DMWs são utilizadas em diversos segmentos da indústria. No caso específico de usinas nucleares, tais soldas são necessárias para conectar tubulações de aço inoxidável com componentes fabricados em aços baixa liga. Os materiais de adição mais utilizados neste tipo de solda são as ligas de níquel 82 e 182. Este trabalho consistiu na soldagem de uma junta dissimilar de aço baixa liga ASTM A-508 G3 e aço inoxidável austenítico AISI 316L utilizando as ligas de níquel 82 e 182 como metais de adição. A soldagem foi realizada manualmente empregando os processos de soldagem ao arco SMAW (Shielded Metal Arc Welding e GTAW (Gas Tungsten Arc Welding. Os corpos de prova foram caracterizados microestruturalmente utilizando-se microscópio óptico e microscópio eletrônico de varredura com microanálise por dispersão de energia de raios X (EDS e ensaios de microdureza Vickers. Observou-se uma microestrutura constituída de dendritas de austenita com a presença de precipitados com formas e dimensões definidas pelo aporte térmico e pela direção de soldagem. Não houve variação significativa da dureza ao longo da junta soldada, demonstrando a adequação dos parâmetros de soldagem utilizados.The dissimilar metal welds (DMWs are used in several areas of the industries. In the nuclear power plant, this weld using nickel alloy welding wires is used to connect stainless steel pipes to low alloy steel components on the reactor pressured vessels. The filler materials commonly used in this type of weld are nickel alloys 82 and 182.. In this study, dissimilar metal welds composed of low alloy steel ASTM A-508 G3, nickel alloys 82 e 182 as weld metals, and austenitic stainless steel AISI 316L were prepared by manual shielded metal arc welding (SMAW and gas tungsten arc welding techniques (GTAW. Samples were microstructural characterized by optical microscopy and scanning electron microscopy

  12. Method for Estimating Evaporative Potential (IM/CLO) from ASTM Standard Single Wind Velocity Measures

    Science.gov (United States)

    2016-08-10

    IM/CLO) FROM ASTM STANDARD SINGLE WIND VELOCITY MEASURES DISCLAIMER The opinions or assertions contained herein are the private views of the...USARIEM TECHNICAL REPORT T16-14 METHOD FOR ESTIMATING EVAPORATIVE POTENTIAL (IM/CLO) FROM ASTM STANDARD SINGLE WIND VELOCITY... ASTM STANDARD SINGLE WIND VELOCITY MEASURES Adam W. Potter Biophysics and Biomedical Modeling Division U.S. Army Research Institute of Environmental

  13. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Louthan, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); PNNL, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  14. ASTM Validates Air Pollution Test Methods

    Science.gov (United States)

    Chemical and Engineering News, 1973

    1973-01-01

    The American Society for Testing and Materials (ASTM) has validated six basic methods for measuring pollutants in ambient air as the first part of its Project Threshold. Aim of the project is to establish nationwide consistency in measuring pollutants; determining precision, accuracy and reproducibility of 35 standard measuring methods. (BL)

  15. 76 FR 1459 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2011-01-10

    ... Production Act of 1993-ASTM International Notice is hereby given that, on December 6, 2010, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the...

  16. Evaluating the Sporicidal Activity of Disinfectants against Clostridium difficile and Bacillus amyloliquefaciens Spores by Using the Improved Methods Based on ASTM E2197-11.

    Science.gov (United States)

    Uwamahoro, Marie Christine; Massicotte, Richard; Hurtubise, Yves; Gagné-Bourque, François; Mafu, Akier Assanta; Yahia, L'Hocine

    2018-01-01

    Spore-forming pathogenic bacteria, such as Clostridium difficile , are associated with nosocomial infection, leading to the increased use of sporicidal disinfectants, which impacts socioeconomic costs. However, C. difficile can be prevented using microorganisms such as Bacillus amyloliquefaciens , a prophylactic agent that has been proven to be effective against it in recent tests or it can be controlled by sporicidal disinfectants. These disinfectants against spores should be evaluated according to a known and recommended standard. Unfortunately, some newly manufactured disinfectants like Bioxy products have not yet been tested. ASTM E2197-11 is a standard test that uses stainless steel disks (1 cm in diameter) as carriers, and the performance of the test formulation is calculated by comparing the number of viable test organisms to that on the control carriers. Surface tests are preferable for evaluating disinfectants with sporicidal effects on hard surfaces. This study applies improved methods, based on the ASTM E2197-11 standard, for evaluating and comparing the sporicidal efficacies of several disinfectants against spores of C. difficile and B. amyloliquefaciens , which are used as the test organisms. With the improved method, all spores were recovered through vortexing and membrane filtration. The results show that chlorine-based products are effective in 5 min and Bioxy products at 5% w/v are effective in 10 min. Although Bioxy products may take longer to prove their effectiveness, their non-harmful effects to hospital surfaces and people have been well established in the literature.

  17. Fracture toughness of welded joints of ASTM A543 steel plate

    International Nuclear Information System (INIS)

    Susukida, H.; Uebayashi, T.; Yoshida, K.; Ando, Y.

    1977-01-01

    Fracture toughness and weldability tests have been performed on a high strength steel which is a modification of ASTM A543 Grade B Class 1 steel, with a view to using it for nuclear reactor containment vessels. The results showed that fracture toughness of welded joints of ASTM A543 modified high strength steel is superior and the steel is suitable for manufacturing the containment vessels

  18. Ensaios MSCR segundo as normas ASTM D7405-10a e AASHTO T350-14: um estudo de caso envolvendo ligantes asfálticos modificados

    Directory of Open Access Journals (Sweden)

    Matheus David Inocente Domingos

    2016-12-01

    especially the AC+rubber and the AC+rubber+PPA. The AC+PPA showed low stress sensitivity and the best results for the parameters R and Jnr at 3,200 Pa either in the ASTM or the AASHTO protocols, which justifies its choice as the best formulation. The data from the modified asphalt binders suggest that the change from the ASTM protocol to the AASHTO one is recommended.

  19. 75 FR 44231 - Federal Advisory Committee; Department of Defense Wage Committee

    Science.gov (United States)

    2010-07-28

    ... Wage Committee AGENCY: Department of Defense (DoD). ACTION: Notice of closed meeting. SUMMARY: Pursuant... hereby given that a closed meeting of the Department of Defense Wage Committee will be held on August 24..., Department of Defense Wage Committee, 4000 Defense Pentagon, Washington, DC 20301- 4000. SUPPLEMENTARY...

  20. 77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

    Science.gov (United States)

    2012-02-22

    ... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory... have accepted the revised ASTM F963-11 standard titled, Standard Consumer Safety Specifications for Toy Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will...

  1. Verification of the ASTM G-124 Purge Equation

    Science.gov (United States)

    Robbins, Katherine E.; Davis, Samuel Eddie

    2009-01-01

    ASTM G-124 seeks to evaluate combustion characteristics of metals in high-purity (greater than 99%) oxygen atmospheres. ASTM G-124 provides the following equation to determine the minimum number of purges required to reach this level of purity in a test chamber: n = -4/log10(Pa/Ph), where "n" is the total number of purge cycles required, Ph is the absolute pressure used for the purge on each cycle and Pa is the atmospheric pressure or the vent pressure. The origin of this equation is not known and has been the source of frequent questions as to its accuracy and reliability. This paper shows the derivation of the G-124 purge equation, and experimentally explores the equation to determine if it accurately predicts the number of cycles required.

  2. Evaluation of Instrumentation for Measuring Undissolved Water in Aviation Turbine Fuels per ASTM D3240

    Science.gov (United States)

    2015-11-05

    Undissolved Water in Aviation Turbine Fuels per ASTM D3240 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Joel Schmitigal... water ) in Aviation Turbine Fuels per ASTM D3240 15. SUBJECT TERMS fuel, JP-8, aviation fuel, contamination, free water , undissolved water , Aqua-Glo 16...Michigan 48397-5000 Evaluation of Instrumentation for Measuring Undissolved Water in Aviation Turbine Fuels per ASTM D3240 Joel Schmitigal Force

  3. ASTM STANDARD GUIDE FOR EVALUATING DISPOSAL OPTIONS FOR REUSE OF CONCRETE FROM NUCLEAR FACILITY DECOMMISSIONING

    International Nuclear Information System (INIS)

    Phillips, Ann Marie; Meservey, Richard H.

    2003-01-01

    Within the nuclear industry, many contaminated facilities that require decommissioning contain huge volumes of concrete. This concrete is generally disposed of as low-level waste at a high cost. Much of the concrete is lightly contaminated and could be reused as roadbed, fill material, or aggregate for new concrete, thus saving millions of dollars. However, because of the possibility of volumetric contamination and the lack of a method to evaluate the risks and costs of reusing concrete, reuse is rarely considered. To address this problem, Argonne National Laboratory-East (ANL-E) and the Idaho National Engineering and Environmental Laboratory teamed to write a ''concrete protocol'' to help evaluate the ramifications of reusing concrete within the U.S. Department of Energy (DOE). This document, titled the Protocol for Development of Authorized Release Limits for Concrete at U.S. Department of Energy Site (1) is based on ANL-E's previously developed scrap metal recycle protocols; on the 10-step method outlined in DOE's draft handbook, Controlling Release for Reuse or Recycle of Property Containing Residual Radioactive Material (2); and on DOE Order 4500.5, Radiation Protection of the Public and the Environment (3). The DOE concrete protocol was the basis for the ASTM Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning, which was written to make the information available to a wider audience outside DOE. The resulting ASTM Standard Guide is a more concise version that can be used by the nuclear industry worldwide to evaluate the risks and costs of reusing concrete from nuclear facility decommissioning. The bulk of the ASTM Standard Guide focuses on evaluating the dose and cost for each disposal option. The user calculates these from the detailed formulas and tabulated data provided, then compares the dose and cost for each disposal option to select the best option that meets regulatory requirements. With this information

  4. 12 CFR 563e.24 - Service test.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Service test. 563e.24 Section 563e.24 Banks and... Assessing Performance § 563e.24 Service test. (a) Scope of test. The service test evaluates a savings... performance, a community development service provided by an affiliate of the savings association, if the...

  5. Standardization work by ASTM and DIN concerning test methods for metallic materials - comparative assessment with regard for practice

    International Nuclear Information System (INIS)

    Gerischer, K.

    1986-01-01

    The article explains the significant role of ASTM and marks out basic elements of the specification system of ASTM standards. Usefulness in practice is taken as the main criterion for the subsequent comparison of ASTM or DIN activities and procedures, and results, for standardization in the field of test methods for metallic materials. The main differences are shown to exist with regard to tropicality of test standards, presentation of useful information and background knowledge, and importance attached to formal questions. ASTM standardization work is shown to be more up-to-date, contain more information, and to be less concerned with formal matters. A closer cooperation between ASTM and DIN is strongly recommended. (orig.) [de

  6. Use of Bayesian Methods to Analyze and Visualize Content Uniformity Capability Versus United States Pharmacopeia and ASTM Standards.

    Science.gov (United States)

    Hofer, Jeffrey D; Rauk, Adam P

    2017-02-01

    The purpose of this work was to develop a straightforward and robust approach to analyze and summarize the ability of content uniformity data to meet different criteria. A robust Bayesian statistical analysis methodology is presented which provides a concise and easily interpretable visual summary of the content uniformity analysis results. The visualization displays individual batch analysis results and shows whether there is high confidence that different content uniformity criteria could be met a high percentage of the time in the future. The 3 tests assessed are as follows: (a) United States Pharmacopeia Uniformity of Dosage Units , (b) a specific ASTM E2810 Sampling Plan 1 criterion to potentially be used for routine release testing, and (c) another specific ASTM E2810 Sampling Plan 2 criterion to potentially be used for process validation. The approach shown here could readily be used to create similar result summaries for other potential criteria. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  7. Use of ASTM D5304 in assessing unstable diesel fuel

    Energy Technology Data Exchange (ETDEWEB)

    Turner, L.M.; Martin, C.J. [Defense Fuel Supply Center, Alexandria, VA (United States); Beal, E.J.; Hardy, D.R. [Naval Research Lab., Washington, DC (United States)

    1995-05-01

    The storage stability, or the length of time a fuel can be stored, is of great concern to diesel fuel users. This paper reports on the use of the new ASTM accelerated test for storage stability by oxygen overpressure (D5304) to predict future storage life span of 63,000,000 gallons of a diesel fuel for US Naval vessel use. This paper demonstrates the use of ASTM D5304 at storage times of 16, 40 and 96 hours to accurately determine the length of time that this large quantity of diesel fuel could be stored at ambient temperatures before the maximum allowable amount of particulate contamination was reached.

  8. Avaliação da degradação térmica e fotooxidativa do ABS para fins de reciclagem Evaluation of thermal and photo-oxidative ABS degradation with recycling purposes

    Directory of Open Access Journals (Sweden)

    Elisabete Maria Saraiva Sanchez

    2003-07-01

    Full Text Available Este trabalho tem como objetivo avaliar a degradação térmica e fotooxidativa do terpolímero poli (acrilonitrila-butadieno-estireno, ABS, utilizado em componentes internos de automóveis. Corpos de prova de ABS moldados por injeção foram submetidos ao envelhecimento térmico, segundo a norma ASTM D794, e ao envelhecimento fotooxidativo segundo as normas ASTM G24 e G53. As amostras envelhecidas foram submetidas às análises dinâmico-mecânica, e microscópicas por microscopia de força atômica no modo não contato. Os resultados mostraram que as transições, tanto da fase vítrea quanto da fase elastomérica na superfície do ABS, são afetadas pela degradação. As áreas dos picos das curvas de módulo de perda em função da temperatura relativos às transições vítreas do ABS foram correlacionadas ao alongamento na ruptura, em função do tempo e tipo de envelhecimento. As propriedades mecânicas são influenciadas de forma mais acentuada pela extensão da degradação da matriz. O método de envelhecimento ASTM G24 mostrou-se mais agressivo que o G53, seja para a fase BR ou para a fase SAN. As imagens microscópicas mostraram que os diferentes envelhecimentos provocaram diferentes variações na rugosidade das superfícies. Amostras fotooxidadas, com perda de alongamento maior que 50%, foram reprocessadas e mostraram uma recuperação superior a 90% nessa propriedade.The aim of this work is the evaluation of thermal and photo-oxidative degradation of the terpolymer acrylonitrile-butadiene-styrene, ABS, used in internal automotive components. Injection molded specimens were aged by ASTM D794, ASTM G24 and ASTM G53 standards. The aged test specimens were studied by means of dynamic mechanical analysis and non-contact atomic force microscopy. The results revealed that the transitions of the glass and rubber phases were affected by the degradation. The area under linear loss modulus-temperature curves was related to tensile properties

  9. HACCP: Integrating Science and Management through ASTM Standards

    Science.gov (United States)

    From a technical perspective, hazard analysis-critical control point (HACCP) evaluation may be considered a risk management tool suited to a wide range of applications. As one outcome of a symposium convened by American Society for Testing and Materials (ASTM) in August, 2005, th...

  10. 76 FR 78614 - Welded ASTM A-312 Stainless Steel Pipe From South Korea and Taiwan: Continuation of Antidumping...

    Science.gov (United States)

    2011-12-19

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-580-810, A-583-815] Welded ASTM A-312... revocation of the antidumping duty orders on welded ASTM A-312 stainless steel pipe from South Korea (Korea... December 30, 1992, the Department published the antidumping duty orders on welded ASTM A-312 stainless...

  11. Sources of Confusion in the Determination of ASTM Repetitive Member Factors for the Allowable Properties of Wood Products

    Science.gov (United States)

    S. Verrill; D. Kretschmann

    2012-01-01

    It is generally accepted that there should be an upward repetitive member allowable property adjustment. ASTM D245 (2011c) and ASTM D1990 (2011b) specify a 1.15 factor for allowable bending stress. This factor is also listed in ASTM D6555 (2011a, Table 1). In this technical note, sources of confusion regarding appropriate repetitive member factors are identified. This...

  12. 76 FR 67673 - Welded ASTM A-312 Stainless Steel Pipe From South Korea and Taiwan: Final Results of Expedited...

    Science.gov (United States)

    2011-11-02

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-580-810, A-583-815] Welded ASTM A-312... the antidumping duty orders on welded ASTM A-312 stainless steel pipe from South Korea and Taiwan... duty orders on welded ASTM A-312 stainless steel pipe from South Korea and Taiwan pursuant to section...

  13. 75 FR 6031 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2010-02-05

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee'') will hold a meeting on Wednesday, March 24, 2010 at 2...

  14. Nuclear reactor pressure vessel surveillance capsule examinations. Application of American Society for Testing and Materials Standards

    International Nuclear Information System (INIS)

    Perrin, J.S.

    1978-01-01

    A series of pressure vessel surveillance capsules is installed in each commercial nuclear power plant in the United States. A capsule typically contains neutron dose meters, thermal monitors, tensile specimens, and Charpy V-notch impact specimens. In order to determine property changes of the pressure vessel resulting from irradiation, surveillance capsules are periodically removed during the life of a reactor and examined. There are numerous standards, regulations, and codes governing US pressure vessel surveillance capsule programmes. These are put out by the US Nuclear Regulatory Commission, the Boiler and Pressure Vessel Committee of the American Society of Mechanical Engineers, and the American Society for Testing and Materials (ASTM). A majority of the pertinent ASTM standards are under the jurisdiction of ASTM Committee E-10 on Nuclear Applications and Measurements of Radiation Effects. The standards, regulations, and codes pertaining to pressure vessel surveillance play an important role in ensuring reliability of the nuclear pressure vessels. ASTM E 185-73 is the Standard Recommended Practice for Surveillance Tests for Nuclear Reactors. This standard recommends procedures for both the irradiation and subsequent testing of surveillance capsules. ASTM E 185-73 references many additional specialized ASTM standards to be followed in specific areas of a surveillance capsule examination. A key element of surveillance capsule programmes is the Charpy V-notch impact test, used to define curves of fracture behaviour over a range of temperatures. The data from these tests are used to define the adjusted reference temperature used in determining pressure-temperature operating curves for a nuclear power plant. (author)

  15. An Automated Safe-to-Mate (ASTM) Tester

    Science.gov (United States)

    Nguyen, Phuc; Scott, Michelle; Leung, Alan; Lin, Michael; Johnson, Thomas

    2013-01-01

    Safe-to-mate testing is a common hardware safety practice where impedance measurements are made on unpowered hardware to verify isolation, continuity, or impedance between pins of an interface connector. A computer-based instrumentation solution has been developed to resolve issues. The ASTM is connected to the circuit under test, and can then quickly, safely, and reliably safe-to-mate the entire connector, or even multiple connectors, at the same time.

  16. Combating Wear of ASTM A36 Steel by Surface Modification Using Thermally Sprayed Cermet Coatings

    Directory of Open Access Journals (Sweden)

    Vineet Shibe

    2016-01-01

    Full Text Available Thermal spray coatings can be applied economically on machine parts to enhance their requisite surface properties like wear, corrosion, erosion resistance, and so forth. Detonation gun (D-Gun thermal spray coatings can be applied on the surface of carbon steels to improve their wear resistance. In the present study, alloy powder cermet coatings WC-12% Co and Cr3C2-25% NiCr have been deposited on ASTM A36 steel with D-Gun thermal spray technique. Sliding wear behavior of uncoated ASTM A36 steel and D-Gun sprayed WC-12% Co and Cr3C2-25% NiCr coatings on base material is observed on a Pin-On-Disc Wear Tester. Sliding wear performance of WC-12% Co coating is found to be better than the Cr3C2-25% NiCr coating. Wear performance of both these cermet coatings is found to be better than uncoated ASTM A36 steel. Thermally sprayed WC-12% Co and Cr3C2-25% NiCr cermet coatings using D-Gun thermal spray technique is found to be very useful in improving the sliding wear resistance of ASTM A36 steel.

  17. PROPOSED ASTM METHOD FOR THE DETERMINATION OF ASBESTOS IN AIR BY TEM AND INFORMATION ON INTERFERING FIBERS

    Science.gov (United States)

    The draft of the ASTM Test Method for air entitled: "Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)" (ASTM Z7077Z) is an adaptation of the International Standard, ISO 10312. It is currently...

  18. Impact of heat treatment on HSS cutting tool (ASTM A600) and its behaviour during machining of mild steel (ASTM A36)

    Science.gov (United States)

    Afolalu, S. A.; Abioye, O. P.; Salawu, E. Y.; Okokpujie, I. P.; Abioye, A. A.; Omotosho, O. A.; Ajayi., O. O.

    2018-04-01

    Carburization is one the best heat treatment that responded well to hardening with Palm Kernel Shell giving the best hardness value. This work studied the influence of carburization on HSStool(ASTM A600) and its behaviour during machining of mild steel (ASTM A36). Composition of the samples (12 pieces of 180 × 12 × 12 mm) HSS tools were checked using UV-VIS spectrometer and the tools were carburized with PKS at holding temperatures and time of 800, 850, 900, 950 °C and 60,90 120 minutes using muffle furnance. The micro structural analysis, surface and core hardnessof the treated samples gave better results than the untreated samples when checked withsoft driven and optical microscope. It wasalso observed that increase in the feed rate and depth for length of cut of 50 mm significantly reduces the wear progression and thereby gave best machining time at maximum carburizing temperature and time(950 °C / 120 minutes) when it was used to cut mild steelon the lathe machine.

  19. JST Thesaurus Headwords and Synonyms: ASTM [MeCab user dictionary for science technology term[Archive

    Lifescience Database Archive (English)

    Full Text Available MeCab user dictionary for science technology term ASTM 名詞 一般 * * * * 米国材料試験協会 ベイコクザ...イリョウシケンキョウカイ ベイコクザイリョーシケンキョーカイ Thesaurus2015 200906091611619997 C IA02 UNKNOWN_1 ASTM

  20. Ductile fracture toughness of heavy section pressure vessel steel plate. A specimen-size study of ASTM A 533 steels

    International Nuclear Information System (INIS)

    Williams, J.A.

    1979-09-01

    The ductile fracture toughness, J/sub Ic/, of ASTM A 533, Grade B, Class 1 and ASTM A 533, heat treated to simulate irradiation, was determined for 10- to 100-mm thick compact specimens. The toughness at maximum specimen load was also measured to determine the conservatism of J/sub Ic/. The toughness of ASTM A 533, Grade B, Class 1 steel was 349 kJ/m 2 and at the equivalent upper shelf temperature, the heat treated material exhibited 87 kJ/m 2 . The maximum load fracture toughness was found to be linearly proportional to specimen size, and only specimens which failed to meet ASTM size criteria exhibited maximum load toughness less than J/sub Ic/

  1. Citizenship and participation in the Macaé e das Ostras Rivers Hydrographic Basin’s Committee

    Directory of Open Access Journals (Sweden)

    Virgínia Villas Boas Sá Rego

    2011-12-01

    Full Text Available This work analyzes the implementation process of the Macaé e das Ostras River Basin Committee as an instrument of the Rio de Janeiro State Water Resources Policy. It was found that the performance of the committee presents obstacles arising from the centralization of power by the state government, the uncertainty of legal and,institutional frameworks, and the predominance of more powerful interests in decision making. However, the Committee also presents great potential to constitute a forum for strengthening democracy and the autonomy of citizens.

  2. ASTM International Workshop on Standards & Measurements for Tissue Engineering Scaffolds

    Science.gov (United States)

    Simon, Carl G.; Yaszemski, Michael J.; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A.

    2016-01-01

    The “Workshop on Standards & Measurements for Tissue Engineering Scaffolds” was held on May 21, 2013 in Indianapolis, IN and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active “guide” documents for educational purposes, but that few standard “test methods” or “practices” have been published. Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition and drug release from scaffolds. Discussions also highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Finally, dialogue emphasized the needs to promote the use of standards in scaffold fabrication, characterization, and commercialization and to assess the use and impact of standards in the TEMPs community. Many scaffold standard needs have been identified and focus should now turn to generating these standards to support the use of scaffolds in TEMPs. PMID:25220952

  3. Isothermal Bainite Processing of ASTM A723 Components

    Science.gov (United States)

    1993-09-01

    4 List of Illustrations 1. Photograph of typical cylinders used in the present study ................................. 7 2. CCT diagram for... CCT ) diagram obtained by thermal and magnetic analyses for the high nickel (-3 percent) ASTM A723 steel. The bainite knee for the 2 percent nickel...block. Also shown is the slope giving the average cooling rate in the critical region of the CCT diagram . This average rate happens to approximately

  4. 24 CFR 3288.3 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Definitions. 3288.3 Section 3288.3... “manufactured home” as defined in 24 CFR 3280.2. Manufactured Housing Consensus Committee or MHCC means the consensus committee established pursuant to section 604(a)(3) of the Act, 42 U.S.C. 5403(a)(3). Party or...

  5. Report of the first meeting of the Project Advisory Committee (Technical) 21-24 March 1983, at NEMROCK, Cairo

    International Nuclear Information System (INIS)

    Taylor, C.B.G.

    1983-05-01

    The Project Advisory Committee (Technical) (PACT) met on 21-24 March 1983, at NEMROCK, Cairo, Egypt, to discuss the joint IAEA/WHO project on Intracavitary Radiation Therapy for Cancer of the Uterus (Egypt/6/004). At this four day meeting the committee (1) identified a well-defined administrative framework in which earlier diagnosis of uterine cancer may be organized, on a limited but firm basis. (2) Agreed on the clinical and dosimetric principles to be followed in implementing the project. (3) Decided on the types and quantities of equipment which it will need in its first two years. (4) Developed the outline of the syllabus for the first training course, and fixed its date (three weeks from 83-10-29). (5) Reviewed the costs which will be incurred in carrying through the project and found them to be consistent with the funds available

  6. 42 CFR 24.5 - Peer review.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Peer review. 24.5 Section 24.5 Public Health PUBLIC....5 Peer review. An individual may not be considered for appointment into the SBRS unless his/her qualifications have been reviewed by a PHS peer review committee and the committee has recommended appointment to...

  7. 2002 Bird Strike Committee USA/Canada Conference

    National Research Council Canada - National Science Library

    Dolbeer, Richard

    2002-01-01

    Over 380 people from 20 countries and 17 exhibitors attended the 4th annual joint meeting of Bird Strike Committee-USA and Bird Strike Committee Canada in Sacramento, California on October 21-24, 2002...

  8. Combating Wear of ASTM A36 Steel by Surface Modification Using Thermally Sprayed Cermet Coatings

    OpenAIRE

    Shibe, Vineet; Chawla, Vikas

    2016-01-01

    Thermal spray coatings can be applied economically on machine parts to enhance their requisite surface properties like wear, corrosion, erosion resistance, and so forth. Detonation gun (D-Gun) thermal spray coatings can be applied on the surface of carbon steels to improve their wear resistance. In the present study, alloy powder cermet coatings WC-12% Co and Cr3C2-25% NiCr have been deposited on ASTM A36 steel with D-Gun thermal spray technique. Sliding wear behavior of uncoated ASTM A36 ste...

  9. ASTM international workshop on standards and measurements for tissue engineering scaffolds.

    Science.gov (United States)

    Simon, Carl G; Yaszemski, Michael J; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A

    2015-07-01

    The "Workshop on Standards & Measurements for Tissue Engineering Scaffolds" was held on May 21, 2013 in Indianapolis, IN, and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active "guide" documents for educational purposes, but few standard "test methods" or "practices." Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition, and drug release from scaffolds. Discussions highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Workshop participants emphasized the need to promote the use of standards in scaffold fabrication, characterization, and commercialization. Finally, participants noted that standards would be more broadly accepted if their impact in the TEMPs community could be quantified. Many scaffold standard needs have been identified and focus is turning to generating these standards to support the use of scaffolds in TEMPs. © 2014 Wiley Periodicals, Inc.

  10. Recommendations for fluorescence instrument qualification: the new ASTM Standard Guide.

    Science.gov (United States)

    DeRose, Paul C; Resch-Genger, Ute

    2010-03-01

    Aimed at improving quality assurance and quantitation for modern fluorescence techniques, ASTM International (ASTM) is about to release a Standard Guide for Fluorescence, reviewed here. The guide's main focus is on steady state fluorometry, for which available standards and instrument characterization procedures are discussed along with their purpose, suitability, and general instructions for use. These include the most relevant instrument properties needing qualification, such as linearity and spectral responsivity of the detection system, spectral irradiance reaching the sample, wavelength accuracy, sensitivity or limit of detection for an analyte, and day-to-day performance verification. With proper consideration of method-inherent requirements and limitations, many of these procedures and standards can be adapted to other fluorescence techniques. In addition, procedures for the determination of other relevant fluorometric quantities including fluorescence quantum yields and fluorescence lifetimes are briefly introduced. The guide is a clear and concise reference geared for users of fluorescence instrumentation at all levels of experience and is intended to aid in the ongoing standardization of fluorescence measurements.

  11. Chronic ankle pain and fibrosis successfully treated with a new noninvasive augmented soft tissue mobilization technique (ASTM): a case report.

    Science.gov (United States)

    Melham, T J; Sevier, T L; Malnofski, M J; Wilson, J K; Helfst, R H

    1998-06-01

    This clinical case report demonstrates the clinical effectiveness of a new form of soft tissue mobilization in the treatment of excessive connective tissue fibrosis (scar tissue) around an athlete's injured ankle. The scar tissue was causing the athlete to have pain with activity, pain on palpation of the ankle, decreased range of motion, and loss of function. Surgery and several months of conventional physical therapy failed to alleviate the athlete's symptoms. As a final resort, augmented soft tissue mobilization (ASTM) was administered. ASTM is an alternative nonsurgical treatment modality that is being researched at Performance Dynamics (Muncip, IN). ASTM is a process that uses ergonomically designed instruments that assist therapists in the rapid localization and effective treatment of areas exhibiting excessive soft tissue fibrosis. This is followed by a stretching and strengthening program. Upon the completion of 6 wk of ASTM therapy, the athlete had no pain and had regained full range of motion and function. This case report is an example of how a noninvasive augmented form of soft tissue mobilization (ASTM) demonstrated impressive clinical results in treating a condition caused by connective tissue fibrosis.

  12. 76 FR 46781 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-08-03

    ..., 2011: 7:30 a.m.-2 p.m.; August 24, 2011: 7:30 a.m.-12:30 p.m. ADDRESSES: I Hotel, 1900 S. First Street... welcome to observe the business of the Biomass Research and Development Technical Advisory Committee. To... ext. 220; E- mail: hq.com ">[email protected] hq.com at least 7 business days prior to the meeting. Members...

  13. Standing Concertation Committee

    CERN Document Server

    HR Department

    2009-01-01

    Main points examined at the meeting of 24 June 2009 Results of the 2009 MARS exercise The Committee took note of the results of the 2009 MARS exercise presented by the Head of the HR Department, expressing satisfaction for the early availability of the statistics and for the fact that the analysis of the results covered the last three years. Status report on the work on the five-yearly review The Committee took note of a presentation by P. Gildemyn on the data collection procedure for the 2010 five-yearly review (staff, fellows, associate members of the personnel, CHIS) and of the proposed work schedule. Implications for employment conditions of the discussions at the Finance Committee and Council on 17 and 18 June 2009 The Chairman briefly reported on the discussions at the meetings of the Finance Committee and Council in June 2009, on the 2010-2014 medium-term plan and the 2010 preliminary draft budget, as well as on the modified strategy and goals for 2009. The Committee ...

  14. Avaliação das propriedades termo-mecânicas de borracha nitrílica após ensaio de compatibilidade de acordo com ASTM D 3455 Thermal-mechanical properties evaluation of nitrilic rubber after compatibility test according to ASTM D 3455

    Directory of Open Access Journals (Sweden)

    Adailze L. Meyer

    2006-01-01

    Full Text Available O copolímero butadieno - acrilonitrila - NBR é comumente aplicado na confecção de gaxetas e anéis de vedação para transformadores elétricos isolados a óleo mineral. Durante o uso esses materiais permanecem em contato com óleo em temperaturas próximas a 90 ºC provocando alterações físicas e químicas no material elastomérico e no óleo. Neste trabalho, estudou-se a variação das propriedades mecânicas do elastômero resultantes do ensaio de compatibilidade (ASTM D 3455[3]. A caracterização mecânica foi realizada por ensaios de resistência a tração, dureza e análise dinâmico-mecânica (DMA. A verificação da estabilidade térmica e a composição do NBR foram obtidas através de análise termogravimétrica (TGA.The copolymer of acrylonitrile and butadiene - NBR is commonly used to manufacture gaskets and seals to be used in electrical transformers insulated by mineral oil. During operation those materials are constantly in contact with oil at temperatures that can reach 90 ºC, causing physical and chemicals changes in both gaskets and oil. In this paper the changes in elastomer mechanical properties after the compatibility test were studied (ASTM D 3455[3]. This characterization was done by tension properties, hardness and dynamical mechanical analysis (DMA. The evaluation of thermal stability and composition of the NBR was carried out through thermogravimetry analysis (TG.

  15. 77 FR 22787 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-04-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on May 24, 2012, from 9 a.m...

  16. Comparative field permeability measurement of permeable pavements using ASTM C1701 and NCAT permeameter methods.

    Science.gov (United States)

    Li, Hui; Kayhanian, Masoud; Harvey, John T

    2013-03-30

    Fully permeable pavement is gradually gaining support as an alternative best management practice (BMP) for stormwater runoff management. As the use of these pavements increases, a definitive test method is needed to measure hydraulic performance and to evaluate clogging, both for performance studies and for assessment of permeability for construction quality assurance and maintenance needs assessment. Two of the most commonly used permeability measurement tests for porous asphalt and pervious concrete are the National Center for Asphalt Technology (NCAT) permeameter and ASTM C1701, respectively. This study was undertaken to compare measured values for both methods in the field on a variety of permeable pavements used in current practice. The field measurements were performed using six experimental section designs with different permeable pavement surface types including pervious concrete, porous asphalt and permeable interlocking concrete pavers. Multiple measurements were performed at five locations on each pavement test section. The results showed that: (i) silicone gel is a superior sealing material to prevent water leakage compared with conventional plumbing putty; (ii) both methods (NCAT and ASTM) can effectively be used to measure the permeability of all pavement types and the surface material type will not impact the measurement precision; (iii) the permeability values measured with the ASTM method were 50-90% (75% on average) lower than those measured with the NCAT method; (iv) the larger permeameter cylinder diameter used in the ASTM method improved the reliability and reduced the variability of the measured permeability. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Vacuum decay container/closure integrity testing technology. Part 1. ASTM F2338-09 precision and bias studies.

    Science.gov (United States)

    Wolf, Heinz; Stauffer, Tony; Chen, Shu-Chen Y; Lee, Yoojin; Forster, Ronald; Ludzinski, Miron; Kamat, Madhav; Godorov, Phillip; Guazzo, Dana Morton

    2009-01-01

    ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method is applicable for leak-testing rigid and semi-rigid non-lidded trays; trays or cups sealed with porous barrier lidding materials; rigid, nonporous packages; and flexible, nonporous packages. Part 1 of this series describes the precision and bias studies performed in 2008 to expand this method's scope to include rigid, nonporous packages completely or partially filled with liquid. Round robin tests using three VeriPac 325/LV vacuum decay leak testers (Packaging Technologies & Inspection, LLC, Tuckahoe, NY) were performed at three test sites. Test packages were 1-mL glass syringes. Positive controls had laser-drilled holes in the barrel ranging from about 5 to 15 microm in nominal diameter. Two different leak tests methods were performed at each site: a "gas leak test" performed at 250 mbar (absolute) and a "liquid leak test" performed at about 1 mbar (absolute). The gas leak test was used to test empty, air-filled syringes. All defects with holes > or = 5.0 microm and all no-defect controls were correctly identified. The only false negative result was attributed to a single syringe with a ASTM F2338-09 test method and the precision and bias study report are available by contacting ASTM International in West Conshohocken, PA, USA (www.astm.org).

  18. 76 FR 31341 - President's Committee for People With Intellectual Disabilities; Notice of Correction of Room for...

    Science.gov (United States)

    2011-05-31

    ... Genevieve Swift, PCPID Executive Administrative Assistant, via e-mail at Edith.Swift@acf.hhs.gov , or via... contact Laverdia Taylor Roach, Director, President's Committee for People with Intellectual Disabilities... and universally designed technologies. Dated: May 24, 2011. Laverdia Taylor Roach, Director, PCPID...

  19. STANDING CONCERTATION COMMITTEE ORDINARY MEETING ON 24 JANUARY 2001

    CERN Multimedia

    2001-01-01

    This meeting was mainly devoted to follow-up from the meetings of the Finance Committee and Council in December 2000, as well as to the work planning of the SCC for 2001. The newly-appointed Chairman of SCC, J. van der Boon, welcomed the Director-General and members to this first meeting of the new year, underlining his objective of maintaining a positive climate of concertation in the best interests of the Organization and its personnel. The President of the Staff Association declared that the latter would actively pursue its role in the same spirit. 1. Follow-up from the meetings of the Finance Committee and Council in December 2000 The Director-General, underlining the positive outcome of the 5-yearly review, conveyed his thanks to all parties that had taken part and, in particular, to the Staff Association for its constructive contribution to reach the compromise accepted by the three parties. After discussion of decisions on the package of measures approved by Council last December and on related impleme...

  20. Mechanical properties of ASTM A508 Class 4 steel used in the LWBR closure head and support flange (LWBR Development Program)

    International Nuclear Information System (INIS)

    Allen, R.M.; Hall, J.F.

    1978-07-01

    The LWBR closure head and support flange are manufactured from forgings of ASTM A508 Class 4 steel rather than the ASTM A508 Class 2 forging material more commonly used in reactor vessels and closure heads. Forgings involved were approximately 300,000 pounds and 46,000 pounds. The extensive material test program conducted on ASTM A508 Class 4 LWBR forgings is described. The results of the tests confirm that the A508 Class 4 material used for the LWBR forgings has been quite good through thickness, fracture toughness, and strength properties and fully meet all specified requirements

  1. Determination of ASTM 1016 structural welded joints fracture toughness through J integral

    International Nuclear Information System (INIS)

    Martins, Geraldo de Paula; Villela, Jefferson Jose; Terra, Jose Lucio; Rabello, Emerson Giovani; Martins, Geraldo Antonio Scoralick; Carneiro, Jose Rubens Goncalves

    2009-01-01

    Fracture toughness is an important parameter for studies of materials behavior in nuclear and conventional industry. Crack propagation resistance is, in general, evaluate using one of the fracture mechanics parameters K IC , for the case of the materials that exhibits a linear elastic behavior, the CTOD (crack tip opening displacement) and J IC , the critical value of J Integral, for the case of materials with elastic-plastic behavior. On this work the fracture mechanics parameters of the ASTM 1016 structural steel welded joints were obtained, using the J Integral. Charpy V tests at several temperatures were also obtained, with the purpose to obtain the curves of ductile-brittle of the regions of the welded joints: Base Metal, (MB), and Melted Zone (MZ). The joints were welded by Gas Metal Arc Welding (GMAW) with V bevel for evaluation the MZ toughness properties. The tests were accomplished at temperatures varying from -100 deg C to 100 deg C using the technical of compliance variation for J IC determination, the critical value that defines the initial stable crack growth, that applies to brittle and ductile materials. The J Integral alternative specimens has square cross section 10mmX10mm, according ASTM E 1820, with notch localized respectively at the BM and MZ. After the tests, the specimens fractured were analyzed in a scanning microscopic electronic (SME) for verification of the fracture surface. The fractography of the specimens at elevated temperatures presented dimples at the region of stable crack growth, characteristic of ductile fracture. The results of J Integral and Charpy V presented a good correlation between these two parameters. From these correlations it can be concluded that in some applications, the use Charpy V energy to infer fracture toughness can be substitute the Integral J tests. (author)

  2. Fretting-corrosion at the modular tapers interface: Inspection of standard ASTM F1875-98.

    Science.gov (United States)

    Bingley, Rachel; Martin, Alan; Manfredi, Olivia; Nejadhamzeeigilani, Mahdiyar; Oladokun, Abimbola; Beadling, Andrew Robert; Siddiqui, Sohail; Anderson, James; Thompson, Jonathan; Neville, Anne; Bryant, Michael

    2018-05-01

    Interest in the degradation mechanisms at the modular tapers interfaces has been renewed due to increased reported cases of adverse reactions to metal debris and the appearance of wear and corrosion at the modular tapers interfaces at revision. Over the past two decades, a lot of research has been expended to understand the degradation mechanisms, with two primary implant loading procedures and orientations used consistently across the literature. ASTM F1875-98 is often used as a guide to understand and benchmark the tribocorrosion processes occurring within the modular tapers interface. This article presents a comparison of the two methods outlined in ASTM F1875-98 as well as a critique of the standard considering the current paradigm in pre-clinical assessment of modular tapers.

  3. Committees and Conflict: Developing a Conflict Resolution Framework.

    Science.gov (United States)

    Spaulding, Angela

    2002-01-01

    Describes development of conflict-resolution framework to address committee conflict. Describes several conflict-resolution strategies. Matches appropriate strategies with different types of committee conflict. For example, compromise is listed at the appropriate strategy to resolve interpersonal conflict. (Contains 24 references.) (PKP)

  4. The Status of silicosis in the world: Feedback on the ASTM Silica Symposium

    CSIR Research Space (South Africa)

    Pretorius, CJ

    2013-06-01

    Full Text Available The second ASTM Silica Symposium was held in Oct 2012 where speakers reported on the status of silicosis in their respective countries. Speakers reported on findings of research that they carried out on sampling equipment and analytical techniques...

  5. ASTM clustering for improving coal analysis by near-infrared spectroscopy.

    Science.gov (United States)

    Andrés, J M; Bona, M T

    2006-11-15

    Multivariate analysis techniques have been applied to near-infrared (NIR) spectra coals to investigate the relationship between nine coal properties (moisture (%), ash (%), volatile matter (%), fixed carbon (%), heating value (kcal/kg), carbon (%), hydrogen (%), nitrogen (%) and sulphur (%)) and the corresponding predictor variables. In this work, a whole set of coal samples was grouped into six more homogeneous clusters following the ASTM reference method for classification prior to the application of calibration methods to each coal set. The results obtained showed a considerable improvement of the error determination compared with the calibration for the whole sample set. For some groups, the established calibrations approached the quality required by the ASTM/ISO norms for laboratory analysis. To predict property values for a new coal sample it is necessary the assignation of that sample to its respective group. Thus, the discrimination and classification ability of coal samples by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) in the NIR range was also studied by applying Soft Independent Modelling of Class Analogy (SIMCA) and Linear Discriminant Analysis (LDA) techniques. Modelling of the groups by SIMCA led to overlapping models that cannot discriminate for unique classification. On the other hand, the application of Linear Discriminant Analysis improved the classification of the samples but not enough to be satisfactory for every group considered.

  6. Visit of H.E. Mr. Attila Chikan, Minister of Economic Affairs, Prof. Adam Török, President, National Committee for Technological Development, Mr. Pal Koncz, Deputy Director General, National Committee for Technological Development, Hungary

    CERN Multimedia

    Laurent Guiraud

    1999-01-01

    Visit of H.E. Mr. Attila Chikan, Minister of Economic Affairs, Prof. Adam Török, President, National Committee for Technological Development, Mr. Pal Koncz, Deputy Director General, National Committee for Technological Development, Hungary

  7. Avaliação da degradação térmica e fotooxidativa do ABS Automotivo Thermal degradation and Photo-oxidation of the ABS used for automotive applications

    Directory of Open Access Journals (Sweden)

    Elisabete M. S. Sanchez

    1999-12-01

    Full Text Available A degradação do ABS foi avaliada após envelhecimento térmico (ASTM D794 e fotooxidativo (ASTM G53 e G24. Essas condições foram escolhidas na tentativa de simular as condições a que esse polímero é submetido durante seu ciclo de vida como componente automobilístico. As mudanças ocorridas no ABS envelhecido pelos três métodos, em diferentes tempos, foram caracterizadas por ensaios mecânicos de tração e impacto, pelo índice de fluidez, pelo índice de carbonilas (FT-IR, pelo índice de amarelecimento e por fotografias ampliadas das fraturas de impacto. Os resultados mostraram que cada técnica utilizada fornece uma resposta característica em função do método de envelhecimento utilizado. A aplicação de técnicas de análise multivariada aos resultados permitiu uma visualização da degradação do material em função das técnicas de envelhecimento.The ABS degradation was investigated after thermal- (80°C and photo-oxidative ageing (ASTM G53 and G24. These conditions were selected to simulate a car interior and the ABS lifetime weatherability. ABS changes were characterised by mechanical properties, melt flow index, carbonyl index (FT-IR, yellowing index and macro-photography of impact fracture. The results showed that each technique gives a characteristically answer for the ageing method. The multivariate analysis provided the degradation view as a function of the ageing method.

  8. National standards for the nuclear industry

    International Nuclear Information System (INIS)

    Laing, W.R.; Corbin, L.T.

    1981-01-01

    Standards needs for the nuclear industry are being met by a number of voluntary organizations, such as ANS, ASTM, AWS, ASME, and IEEE. The American National Standards Institute (ANSI) coordinates these activities and approves completed standards as American National Standards. ASTM has two all-nuclear committees, E-10 and C-26. A C-26 subcommittee, Test Methods, has been active in writing analytical chemistry standards for twelve years. Thirteen have been approved as ANSI standards and others are ready for ballot. Work is continuing in all areas of the nuclear fuel cycle

  9. ITER technical advisory committee meeting at Garching

    International Nuclear Information System (INIS)

    Fujiwara, M.

    1999-01-01

    The ITER Technical Advisory Committee meeting took place on 24-27 February at the Garching Joint Work Site. According to the discussions at the ITER meeting in Yokohama in October 1998, the Technical Advisory Committee was requested to conduct a thorough review of the document 'Options for the reduced technical objectives / reduced cost ITER'

  10. Considerations on the ASTM standards 1789-04 and 1422-05 on the forensic examination of ink.

    Science.gov (United States)

    Neumann, Cedric; Margot, Pierre

    2010-09-01

    The ASTM standards on Writing Ink Identification (ASTM 1789-04) and on Writing Ink Comparison (ASTM 1422-05) are the most up-to-date guidelines that have been published on the forensic analysis of ink. The aim of these documents is to cover most aspects of the forensic analysis of ink evidence, from the analysis of ink samples, the comparison of the analytical profile of these samples (with the aim to differentiate them or not), through to the interpretation of the result of the examination of these samples in a forensic context. Significant evolutions in the technology available to forensic scientists, in the quality assurance requirements brought onto them, and in the understanding of frameworks to interpret forensic evidence have been made in recent years. This article reviews the two standards in the light of these evolutions and proposes some practical improvements in terms of the standardization of the analyses, the comparison of ink samples, and the interpretation of ink examination. Some of these suggestions have already been included in a DHS funded project aimed at creating a digital ink library for the United States Secret Service. © 2010 American Academy of Forensic Sciences.

  11. 76 FR 12711 - Smart Grid Advisory Committee

    Science.gov (United States)

    2011-03-08

    ...The Smart Grid Advisory Committee (SGAC or Committee), will hold a meeting on Thursday, March 24, 2011 from 8:30 a.m. to 5 p.m. The primary purpose of this meeting is to review the early findings and observations of each Subcommittee, strategize the Table of Contents for the Committee report to NIST, agree on the page limit for each subcommittee, and look for any common overarching themes. There will also be breakouts for each subcommittee to meet individually. The agenda may change to accommodate Committee business. The final agenda will be posted on the Smart Grid Web site at http:// www.nist.gov/smartgrid.

  12. Issues Associated with the Use of Higher Ethanol Blends (E17-E24)

    Energy Technology Data Exchange (ETDEWEB)

    Hammel-Smith, C.; Fang, J.; Powders, M.; Aabakken, J.

    2002-10-01

    This report reviews the issues associated wit utilizing higher ethanol blends (E17-E24) and is intended to advise the Department of Energy on factors that might encourage or constrain the integration of such blends into the marketplace.

  13. Autogenous shrinkage of Ducorit S5R ASTM C 1698-09 test method

    DEFF Research Database (Denmark)

    Damkilde, Lars

    The report deals with experimental measurement of autogenous shrinkage of Ducorit S5R according to the test method ASTM C 1698-09. This test method measures the bulk strain of a sealed cementitious specimen, at constant temperature and not subjected to external forces, from the time of final...

  14. CCR+: Metadata Based Extended Personal Health Record Data Model Interoperable with the ASTM CCR Standard.

    Science.gov (United States)

    Park, Yu Rang; Yoon, Young Jo; Jang, Tae Hun; Seo, Hwa Jeong; Kim, Ju Han

    2014-01-01

    Extension of the standard model while retaining compliance with it is a challenging issue because there is currently no method for semantically or syntactically verifying an extended data model. A metadata-based extended model, named CCR+, was designed and implemented to achieve interoperability between standard and extended models. Furthermore, a multilayered validation method was devised to validate the standard and extended models. The American Society for Testing and Materials (ASTM) Community Care Record (CCR) standard was selected to evaluate the CCR+ model; two CCR and one CCR+ XML files were evaluated. In total, 188 metadata were extracted from the ASTM CCR standard; these metadata are semantically interconnected and registered in the metadata registry. An extended-data-model-specific validation file was generated from these metadata. This file can be used in a smartphone application (Health Avatar CCR+) as a part of a multilayered validation. The new CCR+ model was successfully evaluated via a patient-centric exchange scenario involving multiple hospitals, with the results supporting both syntactic and semantic interoperability between the standard CCR and extended, CCR+, model. A feasible method for delivering an extended model that complies with the standard model is presented herein. There is a great need to extend static standard models such as the ASTM CCR in various domains: the methods presented here represent an important reference for achieving interoperability between standard and extended models.

  15. 78 FR 104 - Advisory Committees; Tentative Schedule of Meetings for 2013

    Science.gov (United States)

    2013-01-02

    ... Advisory Committee. Advisory Committee for Pharmaceutical Date(s), if needed, to be Science and Clinical... 11-12, April 29-30, August 15-16, December 16-17. Science Board to FDA February 27, June 24, November... Committee. Date(s), if needed, to be determined. NATIONAL CENTER FOR TOXICOLOGICAL RESEARCH (NCTR) Science...

  16. E-survey with researchers, members of ethics committees and sponsors of clinical research in Brazil: an emerging methodology for scientific research.

    Science.gov (United States)

    Dainesi, Sonia Mansoldo; Goldbaum, Moisés

    2012-12-01

    The growth of Internet users enables epidemiological studies to be conducted electronically, representing a promising methodology for data collection. Members of Ethics Committees, Clinical Researchers and Sponsors were interviewed using questionnaires sent over the Internet. Along with the questionnaire, participants received a message explaining the survey and also the informed consent. Returning the questionnaire meant the consent of the participant was given. No incentive was offered; two reminders were sent. The response rate was 21% (124/599), 20% (58/290) and 45% (24/53) respectively for Ethics Committees, Researchers and Sponsors. The percentage of return before the two reminders was about 62%. Reasons for non-response: participant not found, refusal to participate, lack of experience in clinical research or in the therapeutic field. Characteristics of participants: 45% of Ethics Committee participants, 64% of Researchers and 63% of Sponsors were male; mean age (range), respectively: 47 (28-74), 53 (24-72) and 40 (29-65) years. Among Researchers and Sponsors, all respondents had at least a university degree and, in the Ethics Committees group, only two (1.7%) did not have one. Most of the questionnaires in all groups came from the Southeast Region of Brazil, probably reflecting the highest number of clinical trials and research professionals in this region. Despite the potential limitations of a survey done through the Internet, this study led to a response rate similar to what has been observed with other models, efficiency in obtaining responses (speed and quality), convenience for respondents and low cost.

  17. Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards

    Science.gov (United States)

    Alan Bendtsen; William L. Galligan

    1978-01-01

    The ASTM standards for establishing clear wood mechanical properties and for deriving structural grades and related allowable properties for visually graded lumber can be confusing and difficult for the uninitiated to interpret. This report provides a practical guide to using these standards for individuals not familiar with their application. Sample stress...

  18. Comparing the Methodologies in ASTM G198 Using Combined Hygrothermal-Corrosion Modeling

    Science.gov (United States)

    Samuel L. Zelinka

    2013-01-01

    ASTM G198, “Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood,” was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded fasteners in a...

  19. Comparing the Methodologies in ASTM G198: Is There an Easy Way Out?

    Science.gov (United States)

    Samuel L. Zelinka

    2013-01-01

    ASTM(1) G198, Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood, was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded...

  20. 77 FR 28640 - Federal Prevailing Rate Advisory Committee; Cancellation of Upcoming Meeting

    Science.gov (United States)

    2012-05-15

    ... OFFICE OF PERSONNEL MANAGEMENT Federal Prevailing Rate Advisory Committee; Cancellation of... Prevailing Rate Advisory Committee is issuing this notice to cancel the May 24, 2012, public meeting..., Federal Prevailing Rate Advisory Committee. [FR Doc. 2012-11728 Filed 5-14-12; 8:45 am] BILLING CODE 6325...

  1. 24. International Conference on Atomic Collisions in Solids ICACS-24

    International Nuclear Information System (INIS)

    2010-01-01

    This Book contains the abstracts of invited and contributed talks submitted for presentation at the 24 th International Conference on Atomic Collisions in Solids - ICACS-24. Out of nearly 200 submitted abstracts the International Programme Committee selected 46 oral and 89 poster contributions. Furthermore, 15 plenary invited lectures and the honorary Lindhard lecture are included in the scientific program. An additional tutorial day with 4 tutorial lectures is organised on Sunday prior to the Conference.

  2. Effects of Tempering Temperature and Path on the Microstructural and Mechanical Properties of ASTM Gr.92 Steel

    International Nuclear Information System (INIS)

    Han, C. H.; Baek, J. H.; Kim, S. H.; Lee, C. B.; Kim, Y. K.; Hong, S. I.

    2009-01-01

    SFR (Sodium-Cooled Fast Reactor) is one of the prospective nuclear reactor for the next generation (Gen-IV) systems. The fuel claddings in the SFR are subject to a high fast nuclear irradiation and a high temperature. Fuel technology is a key aspect of an SFR system, with implications for reactor safety, reactor operations, fuel reprocessing technology, and overall system economics. ASTM Gr.92 steel has been considered as the one of the main candidate fuel cladding materials in the design of SFR in that it has higher thermal conductivity as well as dimensional stability under irradiation when compared as austenitic stainless steel. The changes in microstructure and heat-treatment varying M 23 C 6 , MX, M 2 X, and precipitation by ASTM Gr.92 steels to improve high temperature mechanical properties is the attention. According to several researchers, it plays an important role in the mechanical properties of precipitates V, Nb, Cr, C, N as a form of MX and M 2 X precipitates. These fine precipitates formed in the sub- grain by preventing the movement of dislocations in high-temperature mechanical properties will contribute effectively. This study investigated the effects of tempering temperature and heat-treatment path on microstructure and mechanical properties of ASTM Gr.92 steels

  3. An Evaluation of a Proposed Revision of the ASTM D 1990 Grouping Procedure

    Science.gov (United States)

    Steve P Verrill; James W. Evans; David E. Kretschmann; Cherilyn A. Hatfield

    2013-01-01

    Lum, Taylor, and Zidek have proposed a revised procedure for wood species grouping in ASTM standard D 1990. We applaud the authors’ recognition of the importance of considering a strength distribution’s variability as well as its fifth percentile. However, we have concerns about their proposed method of incorporating this information into a standard. We detail these...

  4. E-survey with researchers, members of ethics committees and sponsors of clinical research in Brazil: an emerging methodology for scientific research Inquérito pela Internet com pesquisadores clínicos, membros de comitês de ética e patrocinadores de pesquisa clínica no Brasil: uma metodologia emergente para pesquisa científica

    Directory of Open Access Journals (Sweden)

    Sonia Mansoldo Dainesi

    2012-12-01

    Full Text Available INTRODUCTION: The growth of Internet users enables epidemiological studies to be conducted electronically, representing a promising methodology for data collection. METHODS: Members of Ethics Committees, Clinical Researchers and Sponsors were interviewed using questionnaires sent over the Internet. Along with the questionnaire, participants received a message explaining the survey and also the informed consent. Returning the questionnaire meant the consent of the participant was given. No incentive was offered; two reminders were sent. RESULTS: The response rate was 21% (124/599, 20% (58/290 and 45% (24/53 respectively for Ethics Committees, Researchers and Sponsors. The percentage of return before the two reminders was about 62%. Reasons for non-response: participant not found, refusal to participate, lack of experience in clinical research or in the therapeutic field. Characteristics of participants: 45% of Ethics Committee participants, 64% of Researchers and 63% of Sponsors were male; mean age (range, respectively: 47 (28-74, 53 (24-72 and 40 (29-65 years. Among Researchers and Sponsors, all respondents had at least a university degree and, in the Ethics Committees group, only two (1.7% did not have one. Most of the questionnaires in all groups came from the Southeast Region of Brazil, probably reflecting the highest number of clinical trials and research professionals in this region. CONCLUSION: Despite the potential limitations of a survey done through the Internet, this study led to a response rate similar to what has been observed with other models, efficiency in obtaining responses (speed and quality, convenience for respondents and low cost.INTRODUÇÃO: O crescimento de usuários da Internet possibilita que estudos epidemiológicos sejam conduzidos eletronicamente, representando uma promissora metodologia para coleta de dados. MÉTODOS: Membros de Comitês de Ética, pesquisadores clínicos e patrocinadores foram entrevistados com

  5. Biocompatibility of metal injection molded versus wrought ASTM F562 (MP35N) and ASTM F1537 (CCM) cobalt alloys.

    Science.gov (United States)

    Chen, Hao; Sago, Alan; West, Shari; Farina, Jeff; Eckert, John; Broadley, Mark

    2011-01-01

    We present a comparative analysis between biocompatibility test results of wrought and Metal Injection Molded (MIM) ASTM F562-02 UNS R30035 (MP35N) and F1537 UNS R31538 (CCM) alloy samples that have undergone the same generic orthopedic implant's mechanical, chemical surface pre-treatment, and a designed pre-testing sample preparation method. Because the biocompatibility properties resulting from this new MIM cobalt alloy process are not well understood, we conducted tests to evaluate cytotoxicity (in vitro), hemolysis (in vitro), toxicity effects (in vivo), tissue irritation level (in vivo), and pyrogenicity count (in vitro) on such samples. We show that our developed MIM MP35N and CCM materials and treatment processes are biocompatible, and that both the MIM and wrought samples, although somewhat different in microstructure and surface, do not show significant differences in biocompatibility.

  6. 78 FR 70599 - Federal Prevailing Rate Advisory Committee; Open Committee Meetings

    Science.gov (United States)

    2013-11-26

    ... of Personnel Management Building, 1900 E Street NW., Washington, DC. The Federal Prevailing Rate... the matters being considered and would disrupt substantially the disposition of its business... Advisory Committee, Room 5H27, 1900 E Street NW., Washington, DC 20415, (202) 606-9400. U.S. Office of...

  7. Maximizing policy learning in international committees

    DEFF Research Database (Denmark)

    Nedergaard, Peter

    2007-01-01

    , this article demonstrates that valuable lessons can be learned about policy learning, in practice and theoretically, by analysing the cooperation in the OMC committees. Using the Advocacy Coalition Framework as the starting point of analysis, 15 hypotheses on policy learning are tested. Among other things......, it is concluded that in order to maximize policy learning in international committees, empirical data should be made available to committees and provided by sources close to the participants (i.e. the Commission). In addition, the work in the committees should be made prestigious in order to attract well...

  8. Application of MCDM based hybrid optimization tool during turning of ASTM A588

    Directory of Open Access Journals (Sweden)

    Himadri Majumder

    2017-07-01

    Full Text Available Multi-criteria decision making approach is one of the most troublesome tools for solving the tangled optimization problems in the machining area due to its capability of solving the complex optimization problems in the production process. Turning is widely used in the manufacturing processes as it offers enormous advantages like good quality product, customer satisfaction, economical and relatively easy to apply. A contemporary approach, MOORA coupled with PCA, was used to ascertain an optimal combination of input parameters (spindle speed, depth of cut and feed rate for the given output parameters (power consumption, average surface roughness and frequency of tool vibration using L27 orthogonal array for turning on ASTM A588 mild steel. Comparison between MOORA-PCA and TOPSIS-PCA shows the effectiveness of MOORA over TOPSIS method. The optimum parameter combination for multi-performance characteristics has been established for ASTM A588 mild steel are spindle speed 160 rpm, depth of cut 0.1 mm and feed rate 0.08 mm/rev. Therefore, this study focuses on the application of the hybrid MCDM approach as a vital selection making tool to deal with multi objective optimization problems.

  9. MÉTODOS PARA CARACTERIZAR COMBUSTIBLES LÍQUIDOS Y GASEOSOS OBTENIDOS DE LLANTAS EN DESUSO A TRAVÉS DE LAS NORMAS ASTM.

    Directory of Open Access Journals (Sweden)

    JAIME ALEJANDRO OSPINA

    2011-12-01

    Full Text Available Este artículo muestra la importancia de la caracterización de la energía de combustibles líquidos y gaseosos obtenidos del conocido tratamiento térmico de pirolisis a través de un microondas. La caracterización de estos combustibles tomará en cuenta los estándares técnicos tales como ASTM D3452 – 93 para la cromatografía de gases (GC, ASTM D2549 para cromatografía de gas/ espectrometría de masa (GC/MS y ASTM D6370 -99 para termogravimetría en el análisis de la composición de llantas.También muestra que estos combustibles y gases de pirolisis tiene una alta valor calorífico de 42 MJ / Kg y un contenido de azufre entre 0.8 y 1.65 Wt%, dependiendo en el tipo de llanta y las condiciones del proceso.

  10. 75 FR 18552 - Federal Prevailing Rate Advisory Committee; Open Committee Meetings

    Science.gov (United States)

    2010-04-12

    ... of Personnel Management Building, 1900 E Street, NW., Washington, DC. The Federal Prevailing Rate... business. Therefore, these caucuses will be closed to the public because of a determination made by the..., Federal Prevailing Rate Advisory Committee, Room 5H27, 1900 E Street, NW., Washington, DC 20415, (202) 606...

  11. 77 FR 76304 - Federal Prevailing Rate Advisory Committee; Open Committee Meetings

    Science.gov (United States)

    2012-12-27

    ... 5A06A, U.S. Office of Personnel Management Building, 1900 E Street NW., Washington, DC. The Federal... the matters being considered and would disrupt substantially the disposition of its business... Management, Federal Prevailing Rate Advisory Committee, Room 5H27, 1900 E Street NW., Washington, DC 20415...

  12. A new U.S. film system classification and image quality assessment

    International Nuclear Information System (INIS)

    Knell, M.

    1996-01-01

    The last ASTM Standard E94 which classified Industrial Radiography films was published in 1984. Since that time inspection contracts in US and worldwide have continued to specify Type 1 and Type 2 films--although these no longer exist. From 1990 there was discussion within ASTM and work was done by ASTM Committee E07-01. The method proposed used data on graininess and gradient to produce an index to represent quality. In the early version the author found that it was possible to have a very fine grain low-contrast film with the same index as a fine grain film, with high contrast. The draft standard was then developed, so that it is possible to classify both types of film in separate groups. The first is the Classical type of film and the second is a Wide Latitude film. In a Classical film, the contrast increases over the useable density range. The range of application standards specify densities generally from D = 2.0 to D = 4.0. A radiologist would expect contrast to be higher at D = 4.0 compared with contrast at D = 2.0. The new ASTM film classification uses a signal to noise ratio--with minimum values for each class for contrast and a maximum value for graininess. The ASTM Classification System uses the same parameters as the European Standard EN584-1 and ISO CD

  13. Comparative Study of API 5L X60 and ASTM 572 Gr50 Steel Exposed to Crude Oil and Seawater

    Directory of Open Access Journals (Sweden)

    Marcy Viviana Chiquillo Márquez

    2018-04-01

    Full Text Available In the petroleum industry, the biphasic conditions in storage and separation tanks allow that the material to remain exposed to two different environments, causing its deterioration. In this article, an evaluation is made of the corrosive behavior and Vickers microhardness (HV of two high strength low alloy (HSLA steels and how their surfaces are characterized. The ASTM 572 Gr50 steel showed a lower corrosion rate in all systems after being immersed for 720 and 1440 hours. Characterizing the surface by means of Scanning Electron Microscopy (SEM showed uniform and localized corrosion for the both steels, and revealed that the ASTM 572 Gr50 steel shows pitting corrosion in crude oil systems. The electrochemical results revealed that the corrosion potential of API X60 steel was more negative; however the ASTM 572 Gr50 steel had a higher current density and a lower polarization resistance when immersed in an oil/seawater mixture. It also observed that, after being immersed in the corrosive fluids, the microstructures of the steels were not modified and variations in their microhardness (HV were minute.

  14. Minutes of the 24th meeting of the International Nuclear Data Committee

    International Nuclear Information System (INIS)

    Forrest, R.A.

    2002-10-01

    This meeting was convened with the aim to review the activities of the Nuclear Data Section (NDS) covering the period 2000-2003, and to advise the IAEA/ NDS regarding the programme/budget for the two-year period of 2004-2005. The deliberations in plenary and working group sessions led to a lengthy series of conclusions and recommendations that are given in the full report. Conclusions of particular note are as follows: Nuclear data compilation activities (CINDA and EXFOR) are unique and are judged to be proceeding well. The 13-centre data exchange network is well co-ordinated and led by the NDS. However, the organisation of the Nuclear Reaction Data Centres Network needs to be simplified through the appointment of an overall co-ordinator (overseer) from within NDS. Additional efforts are also recommended to compile charged particle data; The geographical distribution of data services via on-line retrieval is satisfying. The mirror site established in Brazil is functioning reasonably well, and the establishment of a smaller regional facility in India is recommended; The Committee expressed apprehension that, with the retirement/loss of several experienced staff members, some of the activities of the NDS may be seriously hampered. The INDC strongly recommends that all emerging NDS vacancies are occupied as soon as possible with suitable staff possessing the appropriate expertise; The Committee recognised that data dissemination and international co-ordination represent a very important component of the NDS activities. It was seriously concerned about the reduction in the programme portion of the budget and recommended restoring it to its previous level; The Committee judged the four CRP proposals now in the process of start-up, viz. neutron standards, model parameters, Th-U fuel cycle and therapeutic radionuclides, as very important, and recommended their urgent initiation; Based on extensive discussions, following two new CRPs were highly recommended: updated decay

  15. 75 FR 75706 - Federal Prevailing Rate Advisory Committee; Open Committee Meetings

    Science.gov (United States)

    2010-12-06

    ... Building, 1900 E Street, NW., Washington, DC. The Federal Prevailing Rate Advisory Committee is composed of... considered and would disrupt substantially the disposition of its business. Therefore, these caucuses will be... 5H27, 1900 E Street, NW., Washington, DC 20415, (202) 606-9400. U.S. Office of Personnel Management...

  16. 76 FR 75567 - Federal Prevailing Rate Advisory Committee; Open Committee Meetings

    Science.gov (United States)

    2011-12-02

    ..., 1900 E Street, NW., Washington, DC. The Federal Prevailing Rate Advisory Committee is composed of a... disrupt substantially the disposition of its business. Therefore, these caucuses will be closed to the... 5H27, 1900 E Street, NW., Washington, DC 20415, (202) 606-9400. U.S. Office of Personnel Management...

  17. 77 FR 29757 - Guidelines Establishing Test Procedures for the Analysis of Pollutants Under the Clean Water Act...

    Science.gov (United States)

    2012-05-18

    ...: Inductively Coupled Plasma-Atomic Emission Spectroscopy ICP/MS: Inductively Coupled Plasma-Mass Spectrometry...): ``Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma--Atomic Emission... Committee, and ASTM International. Standard Methods and ASTM are available in printed or electronic...

  18. About "Save the Children Committee (India)".

    Science.gov (United States)

    1996-01-01

    This article describes the activity among charitable committees to provide education and shelter to orphans and homeless children in India. "Save The Children Committee" of the All India Women's Conference began operations during the Bengal famine of 1943 by providing shelter to children who were homeless or did not know where their parents were. The Bengal Relief Committee also provided shelters, which later became Children's Homes, which were operated by the Save The Children Committee. Funding support for the homes came from individual donors and organizations. The Bengal government provided Rs.25/month/child for 450 children. Children's homes were set up in Phola, Mymensingh, and Brahmanberia, in the present day Bangladesh, and in Bankura. The Committee took over homes in Mahishadal, Khagda, and Belbeni. After 1948, the Children's Homes in East Pakistan were transferred to India. In 1952, several Children's Committees merged. Funds were supplied by international organizations. Government support levels varied over time. Schools for orphans changed from an emphasis on self-reliance and work to ordinary schooling. Brief descriptions are provided for homes at Pifa, Mangalgunge in Bongaon Subdivision, Thakurpukur in 24-Parganas, and Khagda in Midnapore district. For example, the home at Khagda was begun by the Bengal Relief Committee at the time of the famine of 1944. Save The Children Committee took over its operations in 1946. It is now a home for 21 boys. The boys have access to a good high school, have achieved academically, and received respect from the community.

  19. Comparisons of ASTM standards cited in the NRC standard review plan, NUREG-0800 and related documents

    International Nuclear Information System (INIS)

    Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

    1995-10-01

    This report provides the results of comparisons of the cited and latest versions of ASTM standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

  20. 76 FR 16736 - Closed Meeting of the Missile Defense Advisory Committee

    Science.gov (United States)

    2011-03-25

    ... DEPARTMENT OF DEFENSE Office of the Secretary Closed Meeting of the Missile Defense Advisory Committee AGENCY: Missile Defense Agency (MDA), DoD. ACTION: Notice of closed meeting. SUMMARY: Under the...: Missile Defense Advisory Committee. Dates of Meeting: Thursday, March 24, 2011. Times: 8 a.m. to 5:30 p.m...

  1. 24 CFR 3280.203 - Flame spread limitations and fire protection requirements.

    Science.gov (United States)

    2010-04-01

    ... value shown in § 3280.203(b) when tested by Standard Test Method for Surface Burning Characteristics of Building Materials, ASTM E84-01, 2001, or Standard Method of Test of Surface Burning Characteristics of... plastic panel countertop; (ii) 1/4-inch or thicker unfinished plywood with phenolic or urea glue; (iii...

  2. 11 CFR 9032.1 - Authorized committee.

    Science.gov (United States)

    2010-01-01

    ... behalf of the candidate who authorized the committee cannot qualify as an independent expenditure. (e) A..., authorized committee means with respect to candidates (as defined at 11 CFR 9032.2) seeking the nomination of... candidate to solicit or receive contributions or to incur expenditures on behalf of the candidate. The term...

  3. Reactor pressure vessel steels ASTM A533B and A508 Cl.2

    International Nuclear Information System (INIS)

    Pelli, R.; Kemppainen, M.; Toerroenen, K.

    1979-11-01

    This report presents the tensile test results of steels ASTM A533B and A508 Cl.2 obtained in connection with a programme initiated to gather and create information needed for the assessment of the structural integrity of the reactor pressure vessels. The tensile properties were studied between -196 and 300 degC varying austenitizing and tempering temperatures and having two different carbon contents for the heats of A533B. (author)

  4. 24 CFR 3280.706 - Oil piping systems.

    Science.gov (United States)

    2010-04-01

    ... the Standard Specification for Seamless Copper Water Tube, ASTM B88-93, or shall comply with ASTM B280... supply connection(s) shall be rigidly anchored to a structural member within 6 inches of the supply... shall be checked for oil leaks with fuel oil of the same grade that will be burned in the appliance. No...

  5. 75 FR 4140 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Science.gov (United States)

    2010-01-26

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION... Tax Credit Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public... Advocacy Panel Earned Income Tax Credit Project Committee will be held Wednesday, February 24, 2010, at 1 p...

  6. Tekken tests in a steel 'ASTM A 514 GR B' to determine the preheating temperature

    International Nuclear Information System (INIS)

    Quesada, Hector Juan; Zalazar, Monica; Asta, Eduardo Pablo

    2004-01-01

    Cold fissure tests are used to determine the proper preheating temperature in order to prevent fissures during the steel welding process. Tekken tests were carried out on a quenched and tempered high resistance 25.4 mm thick steel (ASTM A514 Gr.B) used in structural applications. The welding was carried out using a FCAW semiautomatic process with gas protection and low hydrogen tubular electrode E110T5-K4. Similar parameters and splicing design were later applied in production. The microstructures of the base material and the welding were determined by optic and electron microscopy. The thermal cycles of the welding were recorded in order to relate the preheating temperature with the cooling time from 800 o C - 500 o C (t 8/5 ) and from 800 o C - 100 o C (tg/1) and the presence or not of fissures. Preheating at 150 o C and t 8/5 greater than 17 s was found to guarantee fissure free welding (CW)

  7. Maximizing policy learning in international committees

    DEFF Research Database (Denmark)

    Nedergaard, Peter

    2007-01-01

    , this article demonstrates that valuable lessons can be learned about policy learning, in practice and theoretically, by analysing the cooperation in the OMC committees. Using the Advocacy Coalition Framework as the starting point of analysis, 15 hypotheses on policy learning are tested. Among other things......In the voluminous literature on the European Union's open method of coordination (OMC), no one has hitherto analysed on the basis of scholarly examination the question of what contributes to the learning processes in the OMC committees. On the basis of a questionnaire sent to all participants......, it is concluded that in order to maximize policy learning in international committees, empirical data should be made available to committees and provided by sources close to the participants (i.e. the Commission). In addition, the work in the committees should be made prestigious in order to attract well...

  8. 76 FR 46279 - Smart Grid Advisory Committee

    Science.gov (United States)

    2011-08-02

    ...The Smart Grid Advisory Committee (SGAC or Committee) will hold a meeting via teleconference on Tuesday, August 23, 2011 from 11 a.m. to 2 p.m. Eastern Time (E.T.). The primary purpose of this meeting is to review sections of the Committee's draft report to the NIST Director. The sections of the draft report that the Committee will consider at the meeting will be posted on the SGAC Web site at http:// www.nist.gov/smartgrid. Interested members of the public will be able to participate in the meeting from remote locations by calling into a central phone number.

  9. Systematic Approach to Design Tailor Made Fuel Blends That Meets ASTM Standards

    DEFF Research Database (Denmark)

    Intikhab, S.; Kalakul, Sawitree; H., Choudhury

    2015-01-01

    point, vapor pressure, and heat content were determined using analytical instruments according to their respective American Society for Testing and Materials (ASTM) standards. Most of the properties complied well with the industry standards. However, model gasoline had a comparatively low RVP....... On the other hand, model diesel had a significantly higher cloud point and pour point than what is recommended. This deviation will have an impact on the cold flow properties of the fuels. For both fuels, different additives along with their composition have also been determined using the same computational...

  10. 78 FR 78401 - Advisory Committee for Education and Human Resources; Notice of Meeting

    Science.gov (United States)

    2013-12-26

    ... NATIONAL SCIENCE FOUNDATION Advisory Committee for Education and Human Resources; Notice of... Directorate for Education and Human Resources ( [email protected] ) at least 24 hours prior to the teleconference... mathematics (STEM) education and human resources programming. Agenda Remarks by the Committee Chair and NSF...

  11. Estudo de Procedimentos de Soldagem MIG/MAG para Aplicação de Revestimentos de Liga de Níquel Inconel 625 em Aço Estrutural ASTM A387 Gr.11

    OpenAIRE

    Cavalcante, Nathália Escóssio; Andrade, Tathiane Caminha; Pinheiro, Pedro Helton Magalhães; Miranda, Hélio Cordeiro de; Motta, Marcelo Ferreira; Aguiar, Willys Machado

    2016-01-01

    Resumo O presente trabalho objetiva o estudo de técnicas de soldagem aplicadas a reparo de componentes fabricados em aço ASTM A387 Gr.11, largamente utilizado em aplicações da indústria do petróleo e gás. Devido ao regime de trabalho e necessidade de utilização de materiais com boa resistência mecânica e à corrosão, utilizou-se como metal de adição a liga UNS N06625 (Inconel 625). O processo de soldagem utilizado foi o MIG/MAG e a técnica de soldagem aplicada foi a dupla camada. A metodologia...

  12. A Knowledge- Based Computer System for UO2 Characterization According to ASTM Requirements

    International Nuclear Information System (INIS)

    Afifi, Y.K.; El-Hakim, E.

    2000-01-01

    The uranium dioxde (UO 2 ) powder properties and the pellets fabrication processes determine the characteristics of the sintered UO 2 pellets. The powder properties include chemical and physical characteristics. The physical and chemical properties of UO 2 powder are normally checked to ensure consistency and reproducibility of the sintered UO 2 pellets. Powder characteristics are known to influence the subsequent manufacturing performance or the fuel properties. The aim of this paper is to provide the nuclear industry with a program dealing with the processes and the related requirements to determine the specifications of UO 2 powder according to the American Standards for Testing and Materials (ASTM). This program covers the physical and chemical characteristics of UO 2 powder. A group of logic flow charts dealing with the data and information available in the ASTM for each step in the characterization of UO 2 powder process and the technical assistance are constructed. These logic flow charts are collected to form a module of the software to qualify the UO 2 powder. The program contains 8 modules, each one deals with one object. This program saves time, is also considered as a collective schema for all the required UO 2 powder characterization and the related processes, and could be used as a training tool for less skilled personnel involved in UO 2 powder characterization laboratories

  13. Tekken testing to determine the preheating temperature on ASTM A514 GR B steel

    International Nuclear Information System (INIS)

    Asta, Eduardo; Zalazar, Monica; Quesada, Hector

    2003-01-01

    The cold cracking test methods are used to determine the preheating temperature in order to avoid cracking in steel welding.In this work Tekken tests on high strength quenching and tempering (ASTM A514 GrB) structural steel with a thickness of 25 mm have been made.The welds were done using a FCAW process with gas shielding and basic low hydrogen cored wire E 110T5-K4.The welding parameters and joint design applied in this work are similar to the ones used on site production.The base metal, HAZ and weld metal microstructure have been evaluated by optical and SEM microscopy.Thermal cycles records of each welding have been made to relate preheat temperature with the cooling time on the range of 800-500 degC (t8/5) or 800-100degC (t8/1) and the evidence of crack or no crack condition.Finally, a preheat temperature of 150degC and the cooling time larger than 17 s improve a welding integrity without cracks

  14. 24. ATSR congress - Proceedings; 24e congres ATSR - Recueil des conferences

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-06-15

    This document brings together the available abstracts and presentations given at the 24. congress of the French association for radiation protection techniques and sciences (ATSR) on the topic of the radiation protection actors, and the change in activity and practices: 1 - the new CIPR general recommendations (J-F. Lecomte); 2 - November 2007 legal changes in the public health law (M. Ammerich); 3 - November 2007 legal changes in the labour law (T. Lahaye, M. Ammerich); 4 - events and culture in radiation protection: 2008 situation at EDF (Y. Garcier, H. Delabre); 5 - TSN (nuclear transparency and safety) law and the new nuclear safety authority (M. Bourguignon); 6 - industrial radiography charter in Provence-Alpes-Cote d'Azur region (PACA): presentation, participants, works in progress, stakes (S. Mocaer, N. Grolleau); 7 - Dosimetric study of an industrial gamma-graphy workplace (D. Paul, M. Pizzorno); 8 - experience feedback of controls and inspections at a gamma-graphy workplace in PACA region (G. Veyret et N. Grolleau); 9 - experience feedback from the industrialist's viewpoint, respect of the charter, evaluation questionnaire (S. Mocaer, D. Guillet); 10 - new regulation, CAMARI by-law, national monitoring committee (T. Lahaye); 11 - patient's radiation protection in medical imaging service: actions and regulations (G. Dandis, S. Simon); 12 - patients radiation protection principles in medical imaging (H. Leclet, M. Madoux); 13 - the exposure sheet, its implementation challenges in an operating room with image intensifiers (A. Bourdeloie); 14 - building up of a radiation protection control approach for patients in radiotherapy (L. Kueny); 15 - impact of recent advances in scintiscanning on patients and personnel exposure (S. Balduyck); 16 - Dose rates evaluation during scintiscanning for dependent patients (G. Fagot); 17 - dealing with patients dosimetry: from the regulatory obligation to the daily practice of a medical imaging service (J

  15. Standing Concertation Committee

    CERN Document Server

    HR Department

    2007-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 27 February 2007 included: Saved Leave Scheme (SLS): It was announced that a Management/Staff Association working group had been set up to discuss the Saved Leave Scheme (SLS): Members : M. Büttner, E. Chiaveri (chair), Ph. Defert, D. Klem, M. Vitasse, J.-M. Saint-Viteux. It was noted that the Staff Association was launching a questionnaire on SLS and distributed to all members of the personnel. Merit Recognition Guidelines: In the context of the new Merit Appraisal and Recognition Scheme (MARS), the committee took note of the CERN-wide 2007 Merit Recognition Guidelines, including the Frequently Asked Questions on HR Department's dedicated website. Information on CERN's medium and long-term plans (MTP-LTP)/Contract renewals/ External mobility The Committee took note of the information provided on CERN's MTP-LTP and of documentation distributed at the meeting by the Staff ...

  16. Cavitation erosion - corrosion behaviour of ASTM A27 runner steel in natural river water

    International Nuclear Information System (INIS)

    Tôn-Thât, L

    2014-01-01

    Cavitation erosion is still one of the most important degradation modes in hydraulic turbine runners. Part of researches in this field focuses on finding new materials, coatings and surface treatments to improve the resistance properties of runners to this phenomenon. However, only few studies are focused on the deleterious effect of the environment. Actually, in some cases a synergistic effect between cavitation erosion mechanisms and corrosion kinetics can establish and increase erosion rate. In the present study, the cavitation erosion-corrosion behaviour of ASTM A27 steel in natural river water is investigated. This paper state the approach which has been used to enlighten the synergy between both phenomena. For this, a 20 kHz vibratory test according ASTM G32 standard is coupled to an electrochemical cell to be able to follow the different corrosion parameters during the tests to get evidence of the damaging mechanism. Moreover, mass losses have been followed during the exposure time. The classical degradation parameters (cumulative weight loss and erosion rate) are determined. Furthermore, a particular effort has been implemented to determine the evolution of surface damages in terms of pitting, surface cracking, material removal and surface corrosion. For this, scanning electron microscopy has been used to link the microstructure to the material removal mechanisms

  17. An investigation into the effectiveness of audit committees

    Directory of Open Access Journals (Sweden)

    Zandile Virtue Dlamini

    2017-09-01

    Full Text Available The fundamental purpose of this study was to investigate the effectiveness of audit committees in the eThekwini municipality within the province of KwaZulu Natal. The target population for the study was all the standing and audit committee members totalling 20, thus taking a census-based approach. The descriptive sections adopted a positivist paradigm employing quantitative methodology was used to examine information through techniques that revealed patterns, trends and relationships. Hence, a mixed methodology was the case in this study. The study revealed that the eThekwini audit committee was generally effective in discharging its oversight role in the council, though there were areas of concern, which include control frameworks and financial management to improve corporate governance. The study revealed that there was, to a large extent compliance with legal requirements regarding audit committees, as well as best practice processes. It is therefore important to point out that, this study outlines good practices of audit committees that are worthy of emulation and further improvement by the research community as a framework for good governance in local governments.

  18. 76 FR 12087 - Army Educational Advisory Committee

    Science.gov (United States)

    2011-03-04

    ...: U.S. Army War College Subcommittee of the Army Education Advisory Committee. Dates of Meeting: March 24, 2011. Place of Meeting: U.S. Army War College, 122 Forbes Avenue, Carlisle, PA, Command... faculty; table and examine online College issues; assess resident and distance education programs, self...

  19. Corrosion resistance and microstructure of alloy 625 weld overlay on ASTM A516 grade 70

    Energy Technology Data Exchange (ETDEWEB)

    Moradi, Mohammad J. [Amirkabir Univ. of Technology, Tehran (Iran, Islamic Republic of). Petroleum Engineering Dept.; Ketabchi, Mostafa [Amirkabir Univ. of Technology, Tehran (Iran, Islamic Republic of). Mining and Metallurgical Engineering Dept.

    2016-02-01

    Nickel-based alloys are a crucial class of materials because of their excellent corrosion resistance. In the present study, single layer and two layers alloy 625 weld overlays were deposited by GTAW process on A516 grade 70 carbon steel. The dilution in terms of Fe, Ni, Mo and Nb content was calculated in 30 points of weld overlay. Microstructure observations showed that alloy 625 had austenitic structure with two types of Laves and NbC secondary phases. The uniform and pitting corrosion resistance of alloy 625 weld overlay as casted and as forged were evaluated in accordance with ASTM G48-2011 standard at different temperatures to determine the weight loss and critical pitting temperature. For achieving a better comparison, samples from alloy 625 as casted and as forged were tested under the same conditions. The results point out that single layer alloy 625 weld overlay is not suitable for chloride containing environments, two layers alloy 625 weld overlay and alloy 625 as casted have acceptable corrosion resistance and almost the same critical pitting temperature. Alloy 625 as forged has the best corrosion resistance and the highest critical pitting temperature among all test specimens. Also, the corrosion behavior was evaluated in accordance with ASTM G28 standard. The corrosion rate of single layer weld overlay was unacceptable. The average corrosion rate of two layers weld overlay and in casted condition were 35.82 and 33.01 mpy, respectively. [German] Nickellegierungen sind aufgrund ihres exzellenten Korrosionswiderstandes eine bedeutende Werkstoffklasse. In der diesem Beitrag zugrunde liegenden Studie wurden mittels WIG-Schweissens ein- und zweilagige Schweissplattierungen auf den Kohlenstoffstahl A516 (Grade 70) aufgebracht. Die Vermischung in Form des Fe-, Ni-, Mo- und Nb-Gehaltes wurde an 30 Punkten der Schweissplattierungen berechnet. Die mikrostrukturellen Untersuchungen ergaben, dass die Legierung 625 eine austenitische Struktur mit zwei Arten von

  20. 75 FR 4875 - NASA Commercial Space Committee; Meeting

    Science.gov (United States)

    2010-01-29

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (10-014)] NASA Commercial Space Committee... and Space Administration announces a meeting of the Commercial Space Committee to the NASA Advisory Council. DATES: Tuesday, February 16, 2010, 10 a.m.-5 p.m., Eastern. ADDRESSES: NASA Headquarters, 300 E...

  1. Improved ASTM G72 Test Method for Ensuring Adequate Fuel-to-Oxidizer Ratios

    Science.gov (United States)

    Juarez, Alfredo; Harper, Susana Tapia

    2016-01-01

    The ASTM G72/G72M-15 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment is currently used to evaluate materials for the ignition susceptibility driven by exposure to external heat in an enriched oxygen environment. Testing performed on highly volatile liquids such as cleaning solvents has proven problematic due to inconsistent test results (non-ignitions). Non-ignition results can be misinterpreted as favorable oxygen compatibility, although they are more likely associated with inadequate fuel-to-oxidizer ratios. Forced evaporation during purging and inadequate sample size were identified as two potential causes for inadequate available sample material during testing. In an effort to maintain adequate fuel-to-oxidizer ratios within the reaction vessel during test, several parameters were considered, including sample size, pretest sample chilling, pretest purging, and test pressure. Tests on a variety of solvents exhibiting a range of volatilities are presented in this paper. A proposed improvement to the standard test protocol as a result of this evaluation is also presented. Execution of the final proposed improved test protocol outlines an incremental step method of determining optimal conditions using increased sample sizes while considering test system safety limits. The proposed improved test method increases confidence in results obtained by utilizing the ASTM G72 autogenous ignition temperature test method and can aid in the oxygen compatibility assessment of highly volatile liquids and other conditions that may lead to false non-ignition results.

  2. Work of ICRP Committee 4 on the implementation of the new ICRP recommendations

    International Nuclear Information System (INIS)

    Lochard, J.

    2010-01-01

    ICRP Mission was founded in 1928 by the international Society of Radiology to advance for the public benefit the science of radiological protection, in particular by providing recommendations and guidance on all aspects of protection against ionizing radiation. The commission has five committees, plus a scientific secretariat. It has task groups and working parties which are established either by the main commission or by the committees. It consists of 82 members from 24 countries and six continents. It has 7 approximately 100 external experts participating in task groups. It also has an international community of experts in radiological protection. Committee 4 is concerned with providing advice on the application of the recommended system of protection in all its facets for occupational and public exposure. It also acts as the major point of contact with other international organizations and professional societies concerned with protection against ionizing radiation. The priorities of Committee 4 (2009 -2013) are to: . Develop advice on the implementation of the new recommendations and contribute to their dissemination . Review the ethics and values (precautionary principles, tolerability of risk, equity, sustainable development¡¦) underlying the principles and concepts of the radiation protection system . Enhance the dialogue and cooperation with international organizations and professionals The programme of work for Committee 4 was outlined: a) Task Group N¡Æ 76 : Application of the Commission.s Recommendations to NORM b) Task Group N¡Æ 80 : Application of the Commission.s Recommendations as applied to the geological disposal of long-lived solid radioactive waste c) Task Group N¡Æ 81 : Application of the Commission.s Recommendations to radon exposure d) Committee 4 programme of work (4): Task Group (to be established): Application of the Commission.s Recommendations to the protection of aircraft crew to cosmic rays e) Committee 4 programme of work (5

  3. Special Aviation Fire and Explosion Reduction (SAFER) Advisory Committee. Volume IIB.

    Science.gov (United States)

    1980-06-26

    alternates be identified collectively as the "SAFER Advisory Committee," or simply the Committee. 2. That the Committee serve as the decision-making body...iefta 10 e - Avisttln Kal £s1a~r*W. Odke Of W- rPs A..ecn~e "I t12, AdOWt(~ 0 W ae Itirea~t pgsPer110 I’o Mhet Cuxlser Attenton. Rulem LlozkCL is ira...factors, such as bur.t.it ot inha~ation of toxic gases. It is only in recent years that t-e :37 o actempted to collect such data. 4. Except for the KC

  4. The TSCA interagency testing committee`s approaches to screening and scoring chemicals and chemical groups: 1977-1983

    Energy Technology Data Exchange (ETDEWEB)

    Walker, J.D. [Environmental Protection Agency, Washington, DC (United States)

    1990-12-31

    This paper describes the TSCA interagency testing committee`s (ITC) approaches to screening and scoring chemicals and chemical groups between 1977 and 1983. During this time the ITC conducted five scoring exercises to select chemicals and chemical groups for detailed review and to determine which of these chemicals and chemical groups should be added to the TSCA Section 4(e) Priority Testing List. 29 refs., 1 fig., 2 tabs.

  5. Anodic Protection performance of Steels ASTM A 516-60 And JIS G 3131 SPHC In Concentrated Sulfuric Acid

    International Nuclear Information System (INIS)

    Harsisto; Ginting, Immanuel; Eddy, D.C

    2001-01-01

    One of the methods to protect a carbon steel material from corrosion attack of sulfuric acid environment is with anodic protection. This research was intended to investigate the effect of anodic protection quickened with potential polarization, The material under investigation were ASTM A 516 and JIS G 3131-SPHC in highly concentrated H 2 SO 4 solution. The results showed that potential that was effective for anodic protection in ASTM A 516-60 were at 236-436 mV for 75%, 276-476 mV for 80%, 264-514 mV for 85%,285-485 mV for 90%, and 231-431 mV for 97% H 2 SO 4 so that in JlS G 3131-SPHC were at 303 -503 mV for 75%, 290-490 mV for 80%, 269- 516 mV for 85%, 264-514 mV for 90%, and 287 -487 mV for 97% H 2 SO 4

  6. 75 FR 38770 - Siskiyou, OR Resource Advisory Committee

    Science.gov (United States)

    2010-07-06

    .... Written comments should be sent to Paul Galloway, Medford Interagency Office, 3040 Biddle Road, Medford... facilitate entry into the building. FOR FURTHER INFORMATION CONTACT: Paul Galloway, Acting Public Affairs... the opportunity to address the Committee during that session. Dated: June 24, 2010. Scott D. Conroy...

  7. Effect of C content on the mechanical properties of solution treated as-cast ASTM F-75 alloys.

    Science.gov (United States)

    Herrera, M; Espinoza, A; Méndez, J; Castro, M; López, J; Rendón, J

    2005-07-01

    The mechanical properties of solution treated ASTM F-75 alloys with various carbon contents have been studied. Alloys cast under the same conditions were subjected to solution treatment for several periods and then their tensile properties were evaluated. In the as-cast conditions, the alloys exhibited higher strength values with increasing carbon content whereas their ductility was not significantly affected. For the solution treated alloys, the variation of the strength was characterized by a progressive increase for short treatment times until a maximum value was achieved, which was followed by a diminution in this property for longer treatment times. This behavior was more accentuated for the case of the alloys with medium carbon contents, which also exhibited the highest values of strength. Furthermore, the alloy's ductility was enhanced progressively with increasing solution treatment time. This improvement in ductility was significantly higher for the medium carbon alloys compared with the rest of the studied alloys. Thus, high and low carbon contents in solution treated ASTM F-75 alloys did not produced sufficiently high tensile properties.

  8. Second meeting of the ITER Preparatory Committee

    International Nuclear Information System (INIS)

    Drew, M.

    2003-01-01

    The committee charged to oversee the ITER ITA (ITER transitional arrangements) the ITER preparatory committee, held its second meeting on 24 September at the JET facilities at Culham, UK. Dr. Umberto Finzi of the European Commission was chairman. This meeting was also the first since the succession by Dr. Yasuo Shimomura to Dr. Robert Aymar as Interim Project Leader (IPL). Welcoming Dr. Shimomura in his new capacity, the Committee paid tribute to the outstanding contributions of his predecessor to the definition, design and promotion of ITER, and expressed the gratitude of all Participants to Dr. Aymar and its best wishes for future success in his new appointment.The technical activities of the ITA were the main focus of the Committee's discussions. The Committee took note of the IPL's Status Report on ITA Technical Activities and endorsed the IPL's proposals for the top level structure of the International Team, including the designation of Dr. Pietro Barabaschi as Deputy to the IPL. The Committee took note of the IPL's proposals on Participants' contributions to the ITA and of the Participants' stated intentions and expectations in this regard. Several Delegations pointed out that access to necessary resources would depend strongly on progress made towards the Agreement. All Participants were invited, in the shared interests of the project, to respond constructively to the specific technical areas where the IPL reported a lack of resources. Following a presentation from the IT on Project Management Tools, the Committee expressed support, in general, for the proposed strategy designed to provide the current team with the CAD and Data Management elements necessary to prepare for an efficient start of ITER construction, and asked the IT Leader to report on an estimate and time profile of expenditure during the period to mid-2004. The Committee supported the proposals to re-establish the ITER Test Blanket Working. The Committee agreed that the phasing of planned

  9. 75 FR 9410 - Notice of Meeting of the EPA's Children's Health Protection Advisory Committee (CHPAC)

    Science.gov (United States)

    2010-03-02

    ... meeting. SUMMARY: Pursuant to the provisions of the Federal Advisory Committee Act, Public Law 92-463... (CHPAC) will be held March 24-25, 2010 at the Melrose Hotel, 2430 Pennsylvania Ave, NW., Washington, DC.... U.S. Environmental Protection Agency Children's Health Protection Advisory Committee, Melrose Hotel...

  10. Corrosion resistant properties and weldabilities of ASTM Grade 12 titanium alloy

    International Nuclear Information System (INIS)

    Tsumori, Yoshikatsu; Itoh, Hideo

    1988-01-01

    Plates, sheets, bars, wires and thinner seam-welded tubings were manufactured from large-scaled ingot of ASTM Grade 12 alloy (Ti-0.8Ni-0.3Mo). The processability of G-12 alloy has proved almost similar to that of conventional commercially pure titanium grades. It has been clarified that the G-12 alloy showed several advantageous features: Chlorides-Crevice corrosion resistance of the alloy was almost equals to G-7 and Pd0/TiO 2 coated titanium, and the maximum allowable stress was able to be designed higher than that of commercially pure titanium. This alloy has been in applications also offers where such environments as seawater, brines and moist chlorine, various oil refinery and chemical industries, and others. (author)

  11. The VGB 'Plant Engineering' Special Committee

    International Nuclear Information System (INIS)

    Pamme, Hartmut

    2009-01-01

    The ''Plant Engineering'' Special Committee deals with technical issue of reliable and safe operation of German nuclear power plants. The activities of the expert network of VGB PowerTech e.V. serve to find technical solutions to questions of detail and, in addition, harmonize the work of more than 30 working parties of the Nuclear Power Plants Competence Center. This function makes the Committee also a hub of nuclear activities in VGB. Besides consulting on problems of plant technology, the Committee now also processes or writes opinions and decisions in particular to help industries in negotiating with authorities, the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU), and other institutions. (orig.)

  12. 78 FR 69991 - Advisory Committee; Veterinary Medicine Advisory Committee; Termination

    Science.gov (United States)

    2013-11-22

    .... FDA-2013-N-1380] Advisory Committee; Veterinary Medicine Advisory Committee; Termination AGENCY: Food... announcing the termination of the Veterinary Medicine Advisory Committee. This document removes the Veterinary Advisory Committee from the Agency's list of standing advisory committees. DATES: This rule is...

  13. 76 FR 7810 - Big Horn County Resource Advisory Committee

    Science.gov (United States)

    2011-02-11

    ..., Wyoming 82801. Comments may also be sent via e-mail to [email protected] , with the words Big... DEPARTMENT OF AGRICULTURE Forest Service Big Horn County Resource Advisory Committee AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The Big Horn County Resource Advisory Committee...

  14. STANDING CONCERTATION COMMITTEE ORDINARY MEETING ON 24 APRIL 2002

    CERN Multimedia

    2002-01-01

    Original : English This meeting was mainly devoted to preparing the next meeting of TREF in May, including discussion of the Reports by Internal Task Forces 3 & 4, and to the revision of Administrative and Operational Circulars, as summarised below. 1. Preparation for TREF in May 2002 The SCC agreed on the content of the proposed Draft Agenda for the next meeting of TREF on 16 May. This will be devoted to informal discussion of the Reports by Internal Task Forces 3 & 4 (1) (see items 2 and 3 below), to a status report on the on-going study of guarantees for the pensions of the CERN personnel in the event of dissolution of the Organization - second phase, and to a presentation of personnel statistics 2001, including Equal Opportunities aspects. 2. Report by Internal Task Force 4 on Personnel Issues Taking account of a presentation by J. Ferguson, Convener of Task Force 4, and an informal discussion at the SCC on 10 April, the Committee agreed that the basis upon which the Management and the Sta...

  15. Assessment of wrought ASTM F1058 cobalt alloy properties for permanent surgical implants.

    Science.gov (United States)

    Clerc, C O; Jedwab, M R; Mayer, D W; Thompson, P J; Stinson, J S

    1997-01-01

    The behavior of the ASTM F1058 wrought cobalt-chromium-nickel-molybdenum-iron alloy (commonly referred to as Elgiloy or Phynox) is evaluated in terms of mechanical properties, magnetic resonance imaging, corrosion resistance, and biocompatibility. The data found in the literature, the experimental corrosion and biocompatibility results presented in this article, and its long track record as an implant material demonstrate that the cobalt superalloy is an appropriate material for permanent surgical implants that require high yield strength and fatigue resistance combined with high elastic modulus, and that it can be safely imaged with magnetic resonance.

  16. Glove powder's carrying capacity for latex protein: analysis using the ASTM ELISA test.

    Science.gov (United States)

    Beezhold, D; Horton, K; Hickey, V; Daddona, J; Kostyal, D

    2003-01-01

    Glove donning powders carry latex proteins and disperse them into the workplace environment. We have used the ASTM D6499 ELISA to quantify the amount of latex antigen bound to and carried by glove powders. We could differentiate between a small amount of protein actually bound to the powders and a larger amount carried by the powder. Enhanced binding of a major allergen, Hev b 5, to the starch powders was demonstrated by Western blot. The D6499 ELISA is able to measure total latex antigen, soluble and powder bound, simultaneously without the need to centrifuge the samples.

  17. 75 FR 10309 - Announcement of National Geospatial Advisory Committee Meeting

    Science.gov (United States)

    2010-03-05

    ... Geospatial Advisory Committee (NGAC) will meet on March 24-25, 2010 at the One Washington Circle Hotel, 1... implementation of Office of Management and Budget (OMB) Circular A-16. Topics to be addressed at the meeting...

  18. 78 FR 34702 - Notice of Meeting of Advisory Committee on International Law

    Science.gov (United States)

    2013-06-10

    ... Monday, June 24, 2013, from 9:30 a.m. to approximately 5:30 p.m., at the George Washington University Law School (Frederick Lawrence Student Conference Center), 2000 H Street NW., Washington, DC. Acting Legal... held on June 24 because of the travel schedules of the Acting Legal Adviser and committee members...

  19. Control of glyphosate resistant hairy fleabane (Conyza bonariensis with dicamba and 2,4-D Controle de buva (Conyza bonariensis resistente ao glyphosate com dicamba e 2,4-D

    Directory of Open Access Journals (Sweden)

    D.J. Soares

    2012-06-01

    Full Text Available Auxyn type herbicides such as dicamba and 2,4-D are alternative herbicides that can be used to control glyphosate-resistant hairy fleabane. With the forthcoming possibility of releasing dicamba-resistant and 2,4-D-resistant crops, use of these growth regulator herbicides will likely be an alternative that can be applied to the control of glyphosate resistant hairy fleabane (Conyza bonariensis. The objective of this research was to model the efficacy, through dose-response curves, of glyphosate, 2,4-D, isolated dicamba and glyphosatedicamba combinations to control a brazilian hairy fleabane population resistant to glyphosate. The greenhouse dose-response studies were conducted as a completely randomized experimental design, and the rates used for dose response curve construction were 0, 120, 240, 480, 720 and 960 g a.i. ha-1 for 2,4-D, dicamba and the dicamba combination, with glyphosate at 540 g a.e. ha-1. The rates for glyphosate alone were 0, 180, 360, 540, 720 and 960 g a.e. ha-1. Herbicides were applied when the plants were in a vegetative stage with 10 to 12 leaves and height between 12 and 15 cm. Hairy fleabane had low sensitivity to glyphosate, with poor control even at the 960 g a.e. ha-1 rate. Dicamba and 2,4-D were effective in controlling the studied hairy fleabane. Hairy fleabane responds differently to 2,4-D and dicamba. The combination of glyphosate and dicamba was not antagonistic to hairy fleabane control, and glyphosate may cause an additive effect on the control, despite the population resistance.Os herbicidas mimetizadores de auxinas como dicamba e 2,4-D são alternativas para o controle de buva resistente ao glyphosate. Com a possível futura liberação comercial de culturas resistentes ao dicamba e 2,4-D, a aplicação destes herbicidas reguladores de crescimento será uma provável alternativa de controle de buva resistente ao glyphosate. O objetivo desta pesquisa foi modelar por meio de curvas de dose-resposta a efic

  20. ASTM and VAMAS activities in titanium matrix composites test methods development

    Science.gov (United States)

    Johnson, W. S.; Harmon, D. M.; Bartolotta, P. A.; Russ, S. M.

    1994-01-01

    Titanium matrix composites (TMC's) are being considered for a number of aerospace applications ranging from high performance engine components to airframe structures in areas that require high stiffness to weight ratios at temperatures up to 400 C. TMC's exhibit unique mechanical behavior due to fiber-matrix interface failures, matrix cracks bridged by fibers, thermo-viscoplastic behavior of the matrix at elevated temperatures, and the development of significant thermal residual stresses in the composite due to fabrication. Standard testing methodology must be developed to reflect the uniqueness of this type of material systems. The purpose of this paper is to review the current activities in ASTM and Versailles Project on Advanced Materials and Standards (VAMAS) that are directed toward the development of standard test methodology for titanium matrix composites.

  1. Weldability examination of ASTM A 240 S41500 martensitic stainless steel by thermal cycles simulation testings

    Directory of Open Access Journals (Sweden)

    Alberto Velázquez-del Rosario

    2015-07-01

    Full Text Available The weldability assets of ASTM A 240 S41500 (ASTM A 240/A 240M martensitic stainless steel are presented through the study of the effects of single and double thermal weld cycles on mechanical properties and microstructure of base metal (BM and the artificial heat affected zone (HAZ created by thermal weld simulations. For single cycles, separate peak temperatures of 1000 ºC/12 s and 1350 ºC/12 s (cooling times: 12 s in both cases were evaluated, whilst two combinations of peak temperatures: (1350 ºC/5 s + 1000 ºC/5 s ºC and (1350 ºC/12 s + 1000 ºC/12 s ºC (cooling times: 5 s and 12 s, were applied for double cycles. Post weld heat treatment (PWHT with short and long holding times were applied and Vickers hardness, impact toughness and metallographic examinations were used in order to assess mechanical and metallographic properties in the as-simulated (no heat treated and postweld heat treated conditions. Best properties of the welded joint for double thermal weld cycles with long holding times were reached, which reveals the good weldability and applicability of the tested material in post weld heat treated conditions.

  2. Estimation of improved productivity based on materials substitution in high temperature applications. Use of alloy ASTM A-335 P91

    International Nuclear Information System (INIS)

    Serna, J A; Afanador, W

    2001-01-01

    In ECOPETROL-ICP was carried out an evaluation of the mechanical and micro structural properties of modified 9 Cr-1 Mo alloy, ASTM A-335 Gr. P91, finding higher strength mechanical properties, allowable stresses and creep rupture strength, than the conventional 9 Cr-1 Mo alloy, ASTM A-335 Gr. P9, recommending the alloy P91 as substitute tube material in the radiation zone of the Visbreaking heater of Cartagena's refinery (furnace in revamping process). The results obtained permit a thickness reduction of radiation tubes of material P91 close to 25% and increase the internal volume tube over up 8%, which is a parameter to consider in improving productivity and efficiency process. Also would be obtained a significant savings cost in the material among 5 and 10%. Additionally, expectations of both design and remaining useful life would be seen extensively favored with this change of alloy

  3. STANDING CONCERTATION COMMITTEE ORDINARY MEETING ON 23 JUNE 1999

    CERN Multimedia

    1999-01-01

    Original: EnglishThis meeting of the SCC was devoted to the follow-up of the meetings of the Finance Committee and Council in June, to discussion of the voluntary programmes - including news from the Director-General on four extra RSL posts, and to other main items indicated below :Follow-up of the meetings of Finance Committee and Council in JuneThe Committee took note of the Chairman's report on these meetings and discussed follow-up actions in preparation for the next meeting of TREF on 24 September.Report from FC and Council meetingsThe Management concluded that work would continue on the basis of the planning and scope of the 5-yearly review as presented to the Committees (document CERN/TREF/127/Rev.2), in order to launch the data collection enquiry in external organisations this autumn. Emphasis would be given to the study of the career structure and recruitment-related aspects, whilst limiting data collection work on some other issues which had been examined in depth at the previous review in 1994/95. ...

  4. 76 FR 28416 - Prince of Wales Resource Advisory Committee

    Science.gov (United States)

    2011-05-17

    ... DEPARTMENT OF AGRICULTURE Forest Service Prince of Wales Resource Advisory Committee AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The Prince of Wales Resource Advisory Committee... Prince of Wales RAC c/o District Ranger P.O. Box 500 Craig, AK 99921, or by e-mail to [email protected

  5. 24 CFR 3280.604 - Materials.

    Science.gov (United States)

    2010-04-01

    ... Cellular Core—ASTM F628-91. Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot... (ANSI-1982). Performance Requirements for Wall Hydrants, Frost Proof Automatic Draining, Anti-Backflow...

  6. 76 FR 56879 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Science.gov (United States)

    2011-09-14

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Earned Income Tax Credit Project Committee will be held Monday, October 24, 2011, at 3 p.m. Eastern Time...

  7. 75 FR 62632 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Science.gov (United States)

    2010-10-12

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Income Tax Credit Project Committee will be held Wednesday, November 24, 2010, at 1 p.m. Eastern Time via...

  8. 77 FR 38091 - NASA Advisory Council; Aeronautics Committee; Meeting.

    Science.gov (United States)

    2012-06-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 12-047] NASA Advisory Council; Aeronautics... National Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA..., July 24, 2012, 8 a.m. to 3 p.m. local time. ADDRESSES: NASA Goddard Space Flight Center (GSFC...

  9. Mechanical behaviour of Astm A 297 grade Hp joints welded using different processes

    International Nuclear Information System (INIS)

    Emygdio, Paulo Roberto Oliveira; Zeemann, Annelise; Almeida, Luiz Henrique de

    1996-01-01

    The influence of different arc welding processes on mechanical behaviour was studied for cast heat resistant stainless steel welded joints, in the as welded conditions. ASTM A 297 grade HP with niobium and niobium/titanium additions were welded following three different welding procedures, using shielded metal arc welding gas tungsten arc welding and plasma arc welding, in six welded joints. The welded joint mechanical behaviour was evaluated by ambient temperature and 870 deg C tensile tests; and creep tests at 900 deg C and 50 MPa. Mechanical test results showed that the welding procedure qualification following welding codes is not suitable for high temperature service applications. (author)

  10. AGU Committees

    Science.gov (United States)

    Administrative Committees are responsible for those functions required for the overall performance or well-being of AGU as an organization. These committees are Audit and Legal Affairs, Budget and Finance*, Development, Nominations*, Planning, Statutes and Bylaws*, Tellers.Operating Committees are responsible for the policy direction and operational oversight of AGU's primary programs. The Operating Committees are Education and Human Resources, Fellows*, Information Technology, International Participation*, Meetings, Public Affairs, Public Information, Publications*.

  11. Standing Concertation Committee - Ordinary Meeting on 30 September 2008

    CERN Multimedia

    HR Department

    2008-01-01

    The main items discussed at the meetings of the Standing Concertation Committee on 30 September 2008 included: Part-time work as a pre-retirement measure The Committee agreed to recommend the Director-General to extend the scheme of part-time work as a pre-retirement measure by one year, i.e. until 31 December 2009. Preparation of TREF on 7 October 2008 The Committee took note that the TREF agenda would cover: Annual salary adjustment; Voluntary programmes; Five-yearly review of financial & social conditions of members of the personnel; Update on 2005 review; Preparation for 2010 review; TREF workplan 2009; Update on CHIS actuarial study. The proposals and presentations which the Management planned to present to TREF were discussed and some clarifications were agreed. Follow-up of Finance Committee and Council The Committee took note of a report by the Chairman of points related to personnel matters discussed in those committees. He mentioned in particular the annu...

  12. 77 FR 32639 - HIT Standards Committee and HIT Policy Committee; Call for Nominations

    Science.gov (United States)

    2012-06-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee and HIT Policy Committee; Call for... Health Information Technology Policy Committee (HITPC). Name of Committees: HIT Standards Committee and HIT Policy Committee. General Function of the Committees: The HITSC is charged to provide...

  13. Effects of the normalizing time and temperature on the impact properties of ASTM A-516 grade 70 steel

    International Nuclear Information System (INIS)

    Carneiro, T.; Cescon, T.

    1982-01-01

    The influence of normalizing time and temperature, as well as the plate thickness, on the impact properties of ASTM A-516 grade 70 steel, is studied. Results show that different normalizing conditions may lead to equivalent microstructure with different impact properties. Normalizing conditions that cause low cooling rate in the critical zone exhibit banded microstructure with inferior impact properties. (Author) [pt

  14. Methods and considerations to determine sphere center from terrestrial laser scanner point cloud data

    International Nuclear Information System (INIS)

    Rachakonda, Prem; Muralikrishnan, Bala; Lee, Vincent; Shilling, Meghan; Sawyer, Daniel; Cournoyer, Luc; Cheok, Geraldine

    2017-01-01

    The Dimensional Metrology Group at the National Institute of Standards and Technology is performing research to support the development of documentary standards within the ASTM E57 committee. This committee is addressing the point-to-point performance evaluation of a subclass of 3D imaging systems called terrestrial laser scanners (TLSs), which are laser-based and use a spherical coordinate system. This paper discusses the usage of sphere targets for this effort, and methods to minimize the errors due to the determination of their centers. The key contributions of this paper include methods to segment sphere data from a TLS point cloud, and the study of some of the factors that influence the determination of sphere centers. (paper)

  15. Experimental and numerical study of a modified ASTM C633 adhesion test for strongly-bonded coatings

    Energy Technology Data Exchange (ETDEWEB)

    Bernardie, Raphaëlle; Berkouch, Reda; Valette, Stéphane; Absi, Joseph; Lefort, Pierre [University of Limoges, Limoges Cedex (France)

    2017-07-15

    When coatings are strongly bonded to their substrates it is often difficult to measure the adhesion values. The proposed method, which is suggested naming “silver print test”, consists in covering the central part of the samples with a thin layer of silver paint, before coating. The process used for testing this new method was the Air plasma spraying (APS), and the materials used were alumina coatings on C35 steel substrates, previously pre-oxidized in CO{sub 2}. The silver painted area was composed of small grains that did not oxidize but that significantly sintered during the APS process. The silver layer reduced the surface where the coating was linked to the substrate, which allowed its debonding, using the classical adhesion test ASTM C633-13, while the direct use of this test (without silver painting) led to ruptures inside the glue used in this test. The numerical modelling, based on the finite element method with the ABAQUS software, provided results in good agreement with the experimental measurements. This concordance validated the used method and allowed accessing to the values of adherence when the experimental test ASTM C633-13 failed, because of ruptures in the glue. After standardization, the “silver print test” might be used for other kinds of deposition methods, such as PVD, CVD, PECVD.

  16. 11 CFR 100.14 - State committee, subordinate committee, district, or local committee (2 U.S.C. 431(15)).

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false State committee, subordinate committee, district, or local committee (2 U.S.C. 431(15)). 100.14 Section 100.14 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) General Definitions § 100.14 State committee...

  17. Annual report of the Committee for the environment-effect-reporting for the year 1988

    International Nuclear Information System (INIS)

    1989-01-01

    This annual report over 1988 presents a general survey of the activities of the Dutch Committee for the environment-effect-reporting (m.e.r.). Besides two themes are discussed in depth: the signifcance of m.e.r. in the decision-making and the discharging from the m.e.r. duty. The appendices contain an overview of the assembly of the Committee, of the gaps in knowledge and information observed in environment-effect reports, the durations of the projects, descriptions of the state of affairs per project and a list of advises brought out by the Committee. (author)

  18. The effect of water injection on nitric oxide emissions of a gas turbine combustor burning ASTM Jet-A fuel

    Science.gov (United States)

    Marchionna, N. R.; Diehl, L. A.; Trout, A. M.

    1973-01-01

    Tests were conducted to determine the effect of water injection on oxides of nitrogen (NOx) emissions of a full annular, ram induction gas turbine combustor burning ASTM Jet-A fuel. The combustor was operated at conditions simulating sea-level takeoff and cruise conditions. Water at ambient temperature was injected into the combustor primary zone at water-fuel ratios up to 2. At an inlet-air temperature of 589 K (600 F) water injection decreased the NOx emission index at a constant exponential rate: NOx = NOx (o) e to the -15 W/F power (where W/F is the water-fuel ratio and NOx(o) indicates the value with no injection). The effect of increasing combustor inlet-air temperature was to decrease the effect of the water injection. Other operating variables such as pressure and reference Mach number did not appear to significantly affect the percent reduction in NOx. Smoke emissions were found to decrease with increasing water injection.

  19. Propriedades físicas e mecânicas de painéis LVL de Eucalyptus grandis

    Directory of Open Access Journals (Sweden)

    Hernando Alfonso Lara Palma

    2011-01-01

    Full Text Available O presente trabalho teve como objetivo principal avaliar as propriedades físicas e mecânicas de painéis LVL (Laminated veneer lumber confeccionados com lâminas de Eucalyptus grandis, provenientes de reflorestamentos da região de Sengés, Paraná - Brasil. Foram confeccionados painéis LVL de 23 lâminas, de dimensões comerciais de 2500 mm de comprimento, 1200 mm de largura e espessura nominal de 50 mm (lâminas de 2,4 mm. Em vigas retiradas dos painéis LVL foram analisadas as propriedades de flexão estática (rigidez e resistência, nas condições de menor inércia (flatwise e de maior inércia (edgewise, compressão paralela, cisalhamento paralelo nos planos L-X e L-Y e densidade, atendendo às prescrições das normas ASTM-D 5456/4761 e ASTM-D 198/143. Os valores médios obtidos para o módulo de elasticidade e resistência à flexão estática foram, respectivamente, 13114 MPa e 88,76 MPa para o ensaio na condição de menor inércia e de, respectivamente, 15871 MPa e 88,63 MPa para o ensaio na condição de maior inércia. A densidade aparente (a 12% de umidade dos painéis LVL e das lâminas foram, respectivamente, 690 kg/ m3 e 649 kg/m3. Os valores médios obtidos nos ensaios de compressão paralela foram 16856 MPa para o módulo de elasticidade e 58,05 MPa para a resistência. Os valores médios da resistência no ensaio de cisalhamento paralelo no plano L-Y e no plano L-X foram 5,96 MPa e 5,91 MPa, respectivamente. Todos esses valores atingiram parcialmente ou ultrapassaram os limites médios de referência estabelecidos para painéis LVL e para a madeira sólida originária, atestando, sobretudo, a qualidade dos painéis produzidos com essa madeira.

  20. 77 FR 27832 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-05-11

    ... organizations --Relations with non-governmental organizations --World Maritime Day --International Maritime... DEPARTMENT OF STATE [Public Notice: 7879] Shipping Coordinating Committee; Notice of Committee...-second Session of the International Maritime Organization (IMO) Technical Co-operation Committee (TCC 62...

  1. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2009-01-01

    The main items discussed at the meetings of the Standing Concertation Committee in the first quarter of 2009 included: Merit Appraisal and Recognition Scheme (MARS) 2009 exercise The committee took note of 2009 MARS ceiling guidelines giving the advancement budget by career path and amounting to approx 1.80% of the basic salary bill. To this will be added 250 steps CERN-wide, financed by savings from implementation of the international indemnity for 2007, 2008 and the first half of 2009. The specific Senior Staff Guidelines, including the proposed number of promotions from Career Path E to F, were also noted. The guidelines with respect to step distribution were also noted: the minima and maxima remain the same as in previous years. Compliance with the guidelines will continue to be monitored closely (more details, including a frequently asked questions section). It was also noted that Financial Awards (awards for extraordinary service and responsibility allowances) may b...

  2. 78 FR 32698 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-31

    ... DEPARTMENT OF STATE [Public Notice 8340] Shipping Coordinating Committee; Notice of Committee... Technical Co-operation Committee --Protection of vital shipping lanes --Periodic review of administrative... of the Organization since the twenty-eighth regular session of the Assembly --External relations...

  3. 75 FR 48411 - Research, Engineering and Development Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-08-10

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development.... 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development (R, E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: September...

  4. Recent developments in uranium resources and supply. Proceedings of a technical committee meeting held in Vienna, 24-28 May 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In recent years substantial uncertainties regarding uranium supply have made it very difficult for both uranium producers and users to plan for the future. In 1992 uranium production met only about 63 percent of reactor requirements. This resulted in a very unstable supply/demand balance where inventory drawdown (supplemented by minor amounts of reprocessing) filled the 20,960 tonne shortfall. The IAEA convened this Technical Committee meeting to take advantage of the new opportunities to collect and analyse information related to the future supply and demand balance and to help reduce uncertainties regarding the relationship. The meeting was effective in bringing together experts from all regions to share, exchange and disseminate information regarding uranium related activities. This meeting on Recent Developments in Uranium Resources and Supply was held in Vienna from 24 to 26 May 1993. It was attended by 47 participants from 23 countries. Twenty-one papers were presented. Contributions from China, the Czech Republic, India, Kazakhstan, Mongolia, Romania and the Russian Federation represent new information in this field. Refs, figs and tabs.

  5. 77 FR 76036 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Charter Renewal

    Science.gov (United States)

    2012-12-26

    ... expanding access to banking services for underserved populations. The Committee will continue to provide advice and recommendations on initiatives to expand access to banking services for underserved... Federal Advisory Committee Act (``FACA''), 5 U.S.C. App., and after consultation with the General Services...

  6. 75 FR 43156 - Federal Advisory Committee; Missile Defense Advisory Committee

    Science.gov (United States)

    2010-07-23

    ... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Missile Defense Advisory Committee AGENCY: Missile Defense Agency (MDA), DoD. ACTION: Notice of closed meeting. SUMMARY: Under the... Defense announces that the Missile Defense Advisory Committee will meet on August 4 and 5, 2010, in...

  7. Moessbauer spectroscopy study on the corrosion resistance of plasma nitrided ASTM F138 stainless steel in chloride solution

    International Nuclear Information System (INIS)

    Souza, S.D. de; Olzon-Dionysio, M.; Basso, R.L.O.; Souza, S. de

    2010-01-01

    Plasma nitriding of ASTM F138 stainless steel samples has been carried out using dc glow discharge under 80% H 2 -20% N 2 gas mixture, at 673 K, and 2, 4, and 7 h time intervals, in order to investigate the influence of treatment time on the microstructure and the corrosion resistance properties. The samples were characterized by scanning electron microscopy, glancing angle X-ray diffraction and conversion electron Moessbauer spectroscopy, besides electrochemical tests in NaCl aerated solution. A modified layer of about 6 μm was observed for all the nitrided samples, independent of nitriding time. The X-ray diffraction analysis shows broad γ N phase peaks, signifying a great degree of nitrogen supersaturation. Besides γ N, the Moessbauer spectroscopy results indicated the occurrence of γ' and ε phases, as well as some other less important phases. Corrosion measurements demonstrate that the plasma nitriding time affects the corrosion resistance and the best performance is reached at 4 h treatment. It seems that the ε/γ' fraction ratio plays an important role on the resistance corrosion. Additionally, the Moessbauer spectroscopy was decisive in this study, since it was able to identify and quantify the iron phases that influence the corrosion resistance of plasma nitrided ASTM F138 samples.

  8. Phases Evolution of an ASTM 335 steel under continuous cooling P91

    International Nuclear Information System (INIS)

    Carrizo, D.A; Danon, C.A; Ramos, C.P

    2012-01-01

    This paper studies the influence of the cooling rate on phase transformations and the resulting microstructure in continuous cooling cycles for an ASTM A335 P91 steel, under fixed austenization conditions. The CCT (Continuous Cooling Transformation) diagram of this material is reported in the literature, so the main phase fields are known. The final structure of the samples depends on the austenitic grain size and the cooling rate. The studied samples were austenized at 1050 o C for 30 minutes and then cooled at different rates between 50 o C/h and 300 o C/h. The identification and characterization of the phases was carried out by using Scanning Electron Microscopy, X-ray Diffraction and Moessbauer Spectroscopy. From the results so obtained, additions to the CCT diagram of the material are proposed, providing new information to it

  9. Federalism and health policy: the intergovernmental committees in Brazil.

    Science.gov (United States)

    Machado, Cristiani Vieira; Lima, Luciana Dias de; Viana, Ana Luiza d'Ávila; Oliveira, Roberta Gondim de; Iozzi, Fabíola Lana; Albuquerque, Mariana Vercesi de; Scatena, João Henrique Gurtler; Mello, Guilherme Arantes; Pereira, Adelyne Maria Mendes; Coelho, Ana Paula Santana

    2014-08-01

    To analyze the dynamics of operation of the Bipartite Committees in health care in the Brazilian states. The research included visits to 24 states, direct observation, document analysis, and performance of semi-structured interviews with state and local leaders. The characterization of each committee was performed between 2007 and 2010, and four dimensions were considered: (i) level of institutionality, classified as advanced, intermediate, or incipient; (ii) agenda of intergovernmental negotiations, classified as diversified/restricted, adapted/not adapted to the reality of each state, and shared/unshared between the state and municipalities; (iii) political processes, considering the character and scope of intergovernmental relations; and (iv) capacity of operation, assessed as high, moderate, or low. Ten committees had advanced level of institutionality. The agenda of the negotiations was diversified in all states, and most of them were adapted to the state reality. However, one-third of the committees showed power inequalities between the government levels. Cooperative and interactive intergovernmental relations predominated in 54.0% of the states. The level of institutionality, scope of negotiations, and political processes influenced Bipartite Committees' ability to formulate policies and coordinate health care at the federal level. Bipartite Committees with a high capacity of operation predominated in the South and Southeast regions, while those with a low capacity of operations predominated in the North and Northeast. The regional differences in operation among Bipartite Interagency Committees suggest the influence of historical-structural variables (socioeconomic development, geographic barriers, characteristics of the health care system) in their capacity of intergovernmental health care management. However, structural problems can be overcome in some states through institutional and political changes. The creation of federal investments, varied by

  10. Credentials of delegates to the 6. regular session. (b) Report of the Credentials Committee

    International Nuclear Information System (INIS)

    1962-01-01

    Argentina Philippines Australia Iraq Bulgaria Union of Soviet Socialist Republics El Salvador United States of America Lebanon 2. The Credentials Committee held a meeting on 24 September 1962 at which russia

  11. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  12. Dr. E.S. Mulder, Die Teologie van die Jesaja-apokalipse (Jes. 24-27 ...

    African Journals Online (AJOL)

    Dr. E.S. Mulder, Die Teologie van die Jesaja-apokalipse (Jes. 24-27). Proefschrift ter verkrijging van de graad van Doctor in de Godgeleerdheid aan de Rijksuniversiteit te Groningen. Groningen, J. B. Wolters, 1954, 125 bis.

  13. The Investment Committee. Effective Committees. Board Basics.

    Science.gov (United States)

    Biggs, John H.

    1997-01-01

    The investment committee of the college or university governing board is charged with determining, overseeing, and assessing the policies and processes by which institutional funds are invested. The committee has fiduciary duty to ensure that the terms of investment of donors' gifts are met and to maximize investment returns within an appropriate…

  14. Effect of using the double layer technique on the microstructure, microhardness and residual stress of welded ASTM A516 GR70 structural steel

    International Nuclear Information System (INIS)

    Oliveira, George Luiz Gomes de; Miranda, Helio Cordeiro de

    2010-01-01

    The aim of this work is to evaluate the effect of using the double layer technique on the microstructure, microhardness and residual stresses of welded ASTM A516 Gr70 structural steel. Samples were welded with the same welding parameters and two types of chamfers, while the samples welded using the double layer technique underwent a buttering process on their chamfer face. Residual stress measurement was accomplished through x-ray diffraction, using a mini diffractometer for measurement in field. Metallographic analysis was accomplished in the transverse section of the welded joint, using optic microscopy and scanning electron microscopy. The double layer technique showed that can be used in the welding of ASTM A516 Gr70 steel, because, besides promote a refinement and a drawing back of the CG-HAZ, it increased compressive residual stress in the whole surface of the analyzed samples.(author)

  15. Electronic properties and bulk moduli of new boron nitride polymorphs, i.e., hyperdiamond B12N12 and simple cubic B24N24, B12N12 fulborenites

    International Nuclear Information System (INIS)

    Pokropivny, V. V.; Bekenev, V. L.

    2006-01-01

    The energy-band structure, density of states, electron density distribution, equation of state, and bulk moduli of three boron-nitride fulborenite crystals, i.e., B 12 N 12 with diamond lattice and B 24 N 24 , B 12 N 12 with simple cubic lattice, whose sites contain fulborene B 12 N 12 and B 24 N 24 molecules, are calculated for the first time using the full-potential linearized augmented plane wave method. The following hyperdiamond B 12 N 12 parameters were obtained: the equilibrium lattice parameter a = 1.1191 nm, the B-N bond length a BN = 0.1405 nm, the number of atoms per unit cell Z = 192, the density ρ = 2.823 g/cm 3 , the bulk modulus B 0 = 658 GPa, and the band gap ΔE g = 3.05 eV. This is a previously unknown unique light superhard semiconductor faujasite with a recorded bulk modulus higher than that of diamond. There are reasons to assume that it is a E phase. The characteristics of B 24 N 24 with simple cubic lattice are as follows: the equilibrium lattice parameter a = 0.7346 nm, the B-N bond length a BN = 0.1521 nm, the number of atoms per unit cell Z = 48, the density ρ = 2.495 g/cm 3 , the bulk modulus B 0 = 367 GPa, and the band gap ΔE g = 3.76 eV. This material is a heteropolar semiconductor or insulator with a bulk modulus comparable with that of cubic boron nitride, as well as a new boron-nitride zeolite with channel diameter of 0.46 nm. B 12 N 12 with simple cubic lattice is a molecular semimetal

  16. Activities of the research committee

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, A.; Shirai, T.; Nakagawa, M.; Osugi, T.; Ikeda, Y.; Ishida, T.; Shimazaki, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-01-01

    The department of Nuclear Energy System serves as a secretarial of the following four research committees organized by JAERI; Japanese Nuclear Data Committee, Atomic and Molecular Data Research Committee, Research Committee on Reactor Physics and Research Committee on Marine Reactors. The purpose and the expected task of each committee are summarized here. The detailed activities of each committee are presented in this paper. (author)

  17. Effect of increased fuel temperature on emissions of oxides of nitrogen from a gas turbine combustor burning ASTM jet-A fuel

    Science.gov (United States)

    Marchionna, N. R.

    1974-01-01

    An annular gas turbine combustor was tested with heated ASTM Jet-A fuel to determine the effect of increased fuel temperature on the formation of oxides of nitrogen. Fuel temperature ranged from ambient to 700 K. The NOx emission index increased at a rate of 6 percent per 100 K increase in fuel temperature.

  18. Assessment of the role of in situ generated (E)-2,4-diene-valproic acid in the toxicity of valproic acid and (E)-2-ene-valproic acid in sandwich-cultured rat hepatocytes

    Energy Technology Data Exchange (ETDEWEB)

    Surendradoss, Jayakumar; Chang, Thomas K.H.; Abbott, Frank S., E-mail: frank.abbott@ubc.ca

    2012-11-01

    Valproic acid (VPA) undergoes cytochrome P450-mediated desaturation to form 4-ene-VPA, which subsequently yields (E)-2,4-diene-VPA by β-oxidation. Another biotransformation pathway involves β-oxidation of VPA to form (E)-2-ene-VPA, which also generates (E)-2,4-diene-VPA by cytochrome P450-mediated desaturation. Although the synthetic form of (E)-2,4-diene-VPA is more hepatotoxic than VPA as shown in various experimental models, there is no conclusive evidence to implicate the in situ generated (E)-2,4-diene-VPA in VPA hepatotoxicity. The present study investigated the effects of modulating the in situ formation of (E)-2,4-diene-VPA on markers of oxidative stress (formation of 2′,7′-dichlorofluorescein; DCF), steatosis (accumulation of BODIPY 558/568 C{sub 12}), necrosis (release of lactate dehydrogenase; LDH), and on cellular total glutathione (GSH) levels in sandwich-cultured rat hepatocytes treated with VPA or (E)-2-ene-VPA. Treatment with either of these chemicals alone increased each of the toxicity endpoints. In VPA-treated hepatocytes, (E)-2,4-diene-VPA was detected only at trace levels, even after phenobarbital (PB) pretreatment and there was no effect on the toxicity of VPA. Furthermore, pretreatment with a cytochrome P450 enzyme inhibitor, 1-aminobenzotriazole (1-ABT), did not influence the extent of VPA toxicity in both PB-pretreated and vehicle-pretreated hepatocytes. However, in (E)-2-ene-VPA-treated hepatocytes, PB pretreatment greatly enhanced the levels of (E)-2,4-diene-VPA and this was accompanied by a further enhancement of the effects of (E)-2-ene-VPA on DCF formation, BODIPY accumulation, LDH release, and GSH depletion. Pretreatment with 1-ABT reduced the concentrations of (E)-2,4-diene-VPA and the extent of (E)-2-ene-VPA toxicity; however, this occurred in PB-pretreated hepatocytes, but not in control hepatocytes. In conclusion, in situ generated (E)-2,4-diene-VPA is not responsible for the hepatocyte toxicity of VPA, whereas it

  19. Microstructure evolution of ASTM 335 P91 steel, subjected to continuous cooling

    International Nuclear Information System (INIS)

    Carrizo, D.A; Danon, C.A; Ramos, C.P

    2012-01-01

    This paper studies the influence of the cooling rate on an isothermal phase transformations in ASTM A335 P91 steel, by the analysis of the resulting microstructure after several continuous cooling cycles under fixed austenization conditions. The CCT (Continuous Cooling Transformation) diagram of this material has already been reported in the literature, so the main phase fields are known, and they depend on the austenitic grain size and the cooling rate. Five samples were tested in a dilatometer, they were austenized and then cooled at different rates between 50 o C/h and 300 o C/h. The identification and characterization of the resulting phases was carried out by using Scanning Electron Microscopy, X-ray Diffraction and Mossbauer Spectroscopy. The obtained results allowed to add information about the presence of retained austenite and (Fe,Cr) 3 C - type carbides to the CCT diagram of the material (author)

  20. Evaluation of E2 form factor = 24Mg

    International Nuclear Information System (INIS)

    Marinelli, J.R.; Moreira, J.R.

    1988-11-01

    Longitudinal and transverse electron scattering form factors for the 2 + state at 1.37 Mev of the 24 Mg nucleus was evaluated with rotational model wavefunctions. Four different approaches were used for the transverse E2 form factor: PHF, cranking model, ridig rotor and irrotational flow. For the nuclear intrinsic wavefunction, the Nilsson model was assumed in all approaches yielding the calculation of the form factor in PWBA and DWBA. The results are discussed and compared with a recent measurement performed with 180 0 electron scattered from this state. The DWBA calculation, taking into account first order corrections shows that PHF and irrotational flow models give the best agreements with the available data and compete in quality with more complex calculation performed under the 'shell model' approach. (author) [pt

  1. 75 FR 33587 - Federal Advisory Committee; Department of Defense Wage Committee

    Science.gov (United States)

    2010-06-14

    ... Wage Committee AGENCY: Department of Defense (DoD). ACTION: Notice of closed meeting. SUMMARY: Pursuant... hereby given that the Department of Defense Wage Committee will meet on July 13, 2010, in Rosslyn... writing to the Chairman, Department of Defense Wage Committee, 4000 Defense Pentagon, Washington, DC 20301...

  2. 75 FR 28786 - Federal Advisory Committee; Department of Defense Wage Committee

    Science.gov (United States)

    2010-05-24

    ... Wage Committee AGENCY: Department of Defense (DoD). ACTION: Notice of closed meeting. SUMMARY: Pursuant... hereby given that a closed meeting of the Department of Defense Wage Committee will be held on June 15..., Department of Defense Wage Committee, 4000 Defense Pentagon, Washington, DC 20301- 4000. SUPPLEMENTARY...

  3. 75 FR 40796 - Federal Advisory Committee; Department of Defense Wage Committee

    Science.gov (United States)

    2010-07-14

    ... Wage Committee AGENCY: Department of Defense (DoD). ACTION: Notice of closed meeting. SUMMARY: Pursuant... hereby given that a closed meeting of the Department of Defense Wage Committee will be held on August 10..., Department of Defense Wage Committee, 4000 Defense Pentagon, Washington, DC 20301- 4000. SUPPLEMENTARY...

  4. Advisory Committee Handbook.

    Science.gov (United States)

    Black Hawk Coll., Moline, IL.

    An advisory committee is generally comprised of persons outside the education profession who have specialized knowledge in a given area. The committee advises, makes recommendations, and gives service to the college and its students, instructors, and administrators. At Black Hawk College, there are four types of advisory committees: community,…

  5. 40 CFR 205.153 - Engine displacement.

    Science.gov (United States)

    2010-07-01

    ..., in accordance with American Society for Testing Materials (ASTM) E 29-67. (b) For rotary engines... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Engine displacement. 205.153 Section... TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycles § 205.153 Engine displacement. (a) Engine...

  6. 76 FR 14115 - Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues

    Science.gov (United States)

    2011-03-15

    ..., Telephone (202) 267-3168, Fax (202) 267-5075, or e-mail at [email protected] . SUPPLEMENTARY INFORMATION... Committee Meeting on Transport Airplane and Engine Issues AGENCY: Federal Aviation Administration (FAA), DOT... Rulemaking Advisory Committee [[Page 14116

  7. An investigation of force components in orthogonal cutting of medical grade cobalt-chromium alloy (ASTM F1537).

    Science.gov (United States)

    Baron, Szymon; Ahearne, Eamonn

    2017-04-01

    An ageing population, increased physical activity and obesity are identified as lifestyle changes that are contributing to the ongoing growth in the use of in-vivo prosthetics for total hip and knee arthroplasty. Cobalt-chromium-molybdenum (Co-Cr-Mo) alloys, due to their mechanical properties and excellent biocompatibility, qualify as a class of materials that meet the stringent functional requirements of these devices. To cost effectively assure the required dimensional and geometric tolerances, manufacturers rely on high-precision machining. However, a comprehensive literature review has shown that there has been limited research into the fundamental mechanisms in mechanical cutting of these alloys. This article reports on the determination of the basic cutting-force coefficients in orthogonal cutting of medical grade Co-Cr-Mo alloy ASTM F1537 over an extended range of cutting speeds ([Formula: see text]) and levels of undeformed chip thickness ([Formula: see text]). A detailed characterisation of the segmented chip morphology over this range is also reported, allowing for an estimation of the shear plane angle and, overall, providing a basis for macro-mechanic modelling of more complex cutting processes. The results are compared with a baseline medical grade titanium alloy, Ti-6Al-4V ASTM F136, and it is shown that the tangential and thrust-force components generated were, respectively, ≈35% and ≈84% higher, depending primarily on undeformed chip thickness but with some influence of the cutting speed.

  8. Records of the 12. regular session (24-30 September 1968). 125. plenary meeting

    International Nuclear Information System (INIS)

    1969-01-01

    Ukrainian Soviet Socialist Republic Turkey Iraq Report of the Credentials Committee Opening date of the thirteenth regulary session The Agency's accounts for 1967 The Agency's relations with intergovernmental organizations The Agency's annual reports to United Nations organs Elections to the Agency's Staff Pension Committee Voluntary contributions to the General Fund for 1969 Paragraphs 1?34 1 ? 23 24 ? 29 30 ? 34 35?42 43?44 45 ?46 47 ? 48 49 ? 52 53 ? 54 55 ukraine

  9. Federalism and health policy: the intergovernmental committees in Brazil

    Directory of Open Access Journals (Sweden)

    Cristiani Vieira Machado

    2014-08-01

    Full Text Available OBJECTIVE To analyze the dynamics of operation of the Bipartite Committees in health care in the Brazilian states. METHODS The research included visits to 24 states, direct observation, document analysis, and performance of semi-structured interviews with state and local leaders. The characterization of each committee was performed between 2007 and 2010, and four dimensions were considered: (i level of institutionality, classified as advanced, intermediate, or incipient; (ii agenda of intergovernmental negotiations, classified as diversified/restricted, adapted/not adapted to the reality of each state, and shared/unshared between the state and municipalities; (iii political processes, considering the character and scope of intergovernmental relations; and (iv capacity of operation, assessed as high, moderate, or low. RESULTS Ten committees had advanced level of institutionality. The agenda of the negotiations was diversified in all states, and most of them were adapted to the state reality. However, one-third of the committees showed power inequalities between the government levels. Cooperative and interactive intergovernmental relations predominated in 54.0% of the states. The level of institutionality, scope of negotiations, and political processes influenced Bipartite Committees’ ability to formulate policies and coordinate health care at the federal level. Bipartite Committees with a high capacity of operation predominated in the South and Southeast regions, while those with a low capacity of operations predominated in the North and Northeast. CONCLUSIONS The regional differences in operation among Bipartite Interagency Committees suggest the influence of historical-structural variables (socioeconomic development, geographic barriers, characteristics of the health care system in their capacity of intergovernmental health care management. However, structural problems can be overcome in some states through institutional and political changes

  10. 75 FR 50751 - Federal Advisory Committee; Department of Defense Wage Committee

    Science.gov (United States)

    2010-08-17

    ... Wage Committee ACTION: Notice of closed meetings. SUMMARY: Pursuant to the provisions of section 10 of... Wage Committee will meet on September 21, October 5, and October 19, 2010, in Rosslyn, VA. The meetings... meetings may be obtained by writing to the Chairman, Department of Defense Wage Committee, 4000 Defense...

  11. Designing cathodic protection systems for marine structures and vehicles. ASTM special technical publication 1370

    Energy Technology Data Exchange (ETDEWEB)

    Hack, H.P. [ed.

    1999-07-01

    Cathodic protection is an important method of protecting structures and ships from the corrosive effects of seawater. Poor designs can be far more costly to implement than optimal designs, Improper design can cause overprotection, with resulting paint blistering and accelerated corrosion of some alloys, underprotection, with resultant structure corrosion, or stray current corrosion of nearby structures. The first ASTM symposium specifically aimed at cathodic protection in seawater was intended to compile all the criteria and philosophy for designing both sacrificial and impressed current cathodic protection systems for structures and vehicles in seawater. The papers which are included in this STP are significant in that they summarize the major seawater cathodic protection system design philosophies. Papers have been processed separately for inclusion on the database.

  12. 49 CFR 178.68 - Specification 4E welded aluminum cylinders.

    Science.gov (United States)

    2010-10-01

    ... in ASTM E 8 (IBR, see § 171.7 of this subchapter). (ii) Cross-head speed of the testing machine may... psi. (ii) One-half of the minimum tensile strength of the material as required in paragraph (j) of... result in rejection of the lot. (i) Flattening test. After hydrostatic testing, a flattening test is...

  13. Decision Making in Liver Transplant Selection Committees

    Science.gov (United States)

    Volk, Michael L; Biggins, Scott W; Huang, Mary Ann; Argo, Curtis K; Fontana, Robert J; Anspach, Renee R

    2011-01-01

    Background In order to receive a liver transplant, patients must first be placed on the waiting list – a decision made in most transplant centers by a multidisciplinary committee. The function of these committees has never been studied. Objectives To describe decision making in liver transplant committees and identify opportunities for process improvement. Design Observational multi-center Setting We observed 63 meetings and interviewed 50 committee members at 4 liver transplant centers. Study Subjects Transplant committee members. Measurements Recorded transcripts and field notes were analyzed using standard qualitative sociological methods. Results While the structure of meetings varied by center, the process was uniform and involved reviewing possible reasons for patient exclusion using primarily inductive reasoning. Stated justifications for excluding patients were a) too well, b) non-hepatic comorbidities or advanced age, c) too sick in the setting of advanced liver disease, d) substance abuse, or e) other psychosocial barriers. Dominant themes identified included members’ angst over deciding who lives and dies, a high correlation between psychosocial barriers to transplant and patients’ socioeconomic status, and the influence of external forces on decision making. Consistently identified barriers to effective group decision making were: 1) unwritten center policies, and 2) confusion regarding advocacy versus stewardship roles. Limitations The use of qualitative methods provides broad understanding but limits specific inferences. These four centers may not be reflective of every transplant center nationwide. Conclusion The difficult decisions made by these committees are reasonably consistent and always well-intentioned, but might be improved by more explicit written policies and clarifying roles. This process may help inform resource allocation in other areas of medicine. Primary funding source The Greenwall Foundation. PMID:22007044

  14. 77 FR 38093 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2012-06-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-046] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory.... to 2:30 p.m., local time. ADDRESSES: NASA Goddard Space Flight Center (GSFC), Building 1, Room E100E...

  15. Model of ASTM Flammability Test in Microgravity: Iron Rods

    Science.gov (United States)

    Steinberg, Theodore A; Stoltzfus, Joel M.; Fries, Joseph (Technical Monitor)

    2000-01-01

    There is extensive qualitative results from burning metallic materials in a NASA/ASTM flammability test system in normal gravity. However, this data was shown to be inconclusive for applications involving oxygen-enriched atmospheres under microgravity conditions by conducting tests using the 2.2-second Lewis Research Center (LeRC) Drop Tower. Data from neither type of test has been reduced to fundamental kinetic and dynamic systems parameters. This paper reports the initial model analysis for burning iron rods under microgravity conditions using data obtained at the LERC tower and modeling the burning system after ignition. Under the conditions of the test the burning mass regresses up the rod to be detached upon deceleration at the end of the drop. The model describes the burning system as a semi-batch, well-mixed reactor with product accumulation only. This model is consistent with the 2.0-second duration of the test. Transient temperature and pressure measurements are made on the chamber volume. The rod solid-liquid interface melting rate is obtained from film records. The model consists of a set of 17 non-linear, first-order differential equations which are solved using MATLAB. This analysis confirms that a first-order rate, in oxygen concentration, is consistent for the iron-oxygen kinetic reaction. An apparent activation energy of 246.8 kJ/mol is consistent for this model.

  16. Hardness optimization of boride diffusion layer on Astm F-75 alloy using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Arguelles O, J. L.; Corona R, M. A. [Universidad Autonoma de San Luis Potosi, Doctorado Institucional en Ingenieria y Ciencia de Materiales, San Luis Potosi 78000, SLP (Mexico); Marquez H, A.; Saldana R, A. L.; Saldana R, A. [Universidad de Guanajuato, Ingenieria Mecanica Agricola DICIVA, Irapuato, Guanajuato 36500 (Mexico); Moreno P, J., E-mail: amarquez@ugto.mx [Universidad de Guanajuato, Departamento de Minas, Metalurgia y Geologia, Ex-Hacienda San Matias s/n, Guanajuato, Guanajuato 36020 (Mexico)

    2017-11-01

    In this study, the Response Surface Methodology (Rsm) and Central Composite Design (Ccd) were used to optimize the hardness of boride diffusion layer on Astm F-75 alloy (also called Haynes alloy). A boronizing thermochemical treatment was carried out at different temperatures and for different time periods. Hardness tests were conducted. The boride diffusion layer was verified by the X-ray diffraction (XRD) analysis indicating the formation of Co B, Co{sub 2}B, Cr B and Mo{sub 2}B phases. An optimal hardness of 3139.7 Hv was obtained for the samples subjected to the boriding process for a duration of 6.86 h at 802.4 degrees Celsius. (Author)

  17. 76 FR 45402 - Advisory Committee; Medical Imaging Drugs Advisory Committee; Re-Establishment

    Science.gov (United States)

    2011-07-29

    .... FDA-2010-N-0002] Advisory Committee; Medical Imaging Drugs Advisory Committee; Re- Establishment... (FDA) is announcing the re- establishment of the Medical Imaging Drugs Advisory Committee in FDA's Center for Drug Evaluation and Research. This rule amends the current language for the Medical Imaging...

  18. 77 FR 25781 - Twenty-First Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems

    Science.gov (United States)

    2012-05-01

    .../Administrative Remarks Approval of Twentieth Plenary Summary Chairperson/Leadership Updates Designated Federal... Workgroup Back Briefs Other Business Closing Plenary Session Other Business Date, Place, and Time for... the committee at any time. Issued in Washington, DC, on April 24, 2012. John Raper, Manager, Business...

  19. 75 FR 35091 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2010-06-21

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-068)] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory....m. to 1:30 p.m., e.d.t. ADDRESSES: NASA Headquarters, 300 E Street, SW., Room 3H46, Washington, DC...

  20. Analysis of reaction products formed in the gas phase reaction of E,E-2,4-hexadienal with atmospheric oxidants: Reaction mechanisms and atmospheric implications

    Science.gov (United States)

    Colmenar, I.; Martin, P.; Cabañas, B.; Salgado, S.; Martinez, E.

    2018-03-01

    An analysis of reaction products for the reaction of E,E-2,4-hexadienal with chlorine atoms (Cl) and OH and NO3 radicals has been carried out at the first time with the aim of obtaining a better understanding of the tropospheric reactivity of α,β-unsaturated carbonyl compounds. Fourier Transform Infrared (FTIR) spectroscopy and Gas Chromatography-Mass Spectrometry with a Time of Flight detector (GC-TOFMS) were used to carry out the qualitative and/or quantitative analyses. Reaction products in gas and particulate phase were observed from the reactions of E,E-2,4- hexadienal with all oxidants. E/Z-Butenedial and maleic anhydride were the main products identified in gas phase. E-butenedial calculated molar yield ranging from 4 to 10%. A significant amount of multifunctional compounds (chloro and hydroxy carbonyls) was identified. These compounds could be formed in particulate phase explaining the ∼90% of unaccounted carbon in gas phase. The reaction with Cl atoms in the presence of NOx with a long reaction time gave Peroxy Acetyl Nitrate (PAN) as an additional product, which is known for being an important specie in the generation of the photochemical smog. Nitrated compounds were the major organic products from the reaction with the NO3 radical. Based on the identified products, the reaction mechanisms have been proposed. In these mechanisms a double bond addition of the atmospheric oxidant at C4/C5 of E,E-2,4-hexadienal is the first step for tropospheric degradation.

  1. 77 FR 10742 - Local Government Advisory Committee; Request for Nominations

    Science.gov (United States)

    2012-02-23

    ... committee (e.g., geographic, economic, social, cultural, educational background, professional affiliations..., participate in teleconference meetings, attend listening sessions with the Administrator or other senior-level...

  2. Fractionation and characterization of particles simulating wear of total joint replacement (TJR) following ASTM standards.

    Science.gov (United States)

    Saha, Subrata; Musib, Mrinal

    2011-01-01

    Reactions of bone cells to orthopedic wear debris produced by the articulating motion of total joint replacements (TJRs) are largely responsible for the long-term failure of such replacements. Metal and polyethylene (PE) wear particles isolated from fluids from total joint simulators, as well as particles that are fabricated by other methods, are widely used to study such in vitro cellular response. Prior investigations have revealed that cellular response to wear debris depends on the size, shape, and dose of the particles. Hence, to have a better understanding of the wear-mediated osteolytic process it is important that these particles are well characterized and clinically relevant, both qualitatively, and quantitatively. In this study we have fractionated both ultra-high molecular weight polyethylene (UHMWPE) and Ti particles, into micron (1.0-10.0 μm), submicron (0.2-1.0 μm), and nanoparticle (0.01-0.2 μm) fractions, and characterized them based on the following size-shape descriptors as put forth in ASTM F1877: i) equivalent circle diameter (ECD), ii) aspect ratio (AR), iii) elongation (E), iv) roundness (R), and v) form factor (FF). The mean (± SD) ECDs (in μm) for micron, submicron, and nanoparticles of UHMWPE were 1.652 ± 0.553, 0.270 ± 0.180, and 0.061 ± 0.035, respectively, and for Ti were 1.894 ± 0.667, 0.278 ± 0.180, and 0.055 ± 0.029, respectively. The values for other descriptors were similar (no statistically significant difference). The nanofraction particles were found to be more sphere-like (higher R and FF values, and lower E and AR values) as compared to larger particles. Future experiments will involve use of these well characterized particles for in vitro studies.

  3. Disinfectant wipes are appropriate to control microbial bioburden from surfaces: use of a new ASTM standard test protocol to demonstrate efficacy.

    Science.gov (United States)

    Sattar, S A; Bradley, C; Kibbee, R; Wesgate, R; Wilkinson, M A C; Sharpe, T; Maillard, J-Y

    2015-12-01

    The use of disinfectant pre-soaked wipes (DPW) to decontaminate high-touch environmental surfaces (HTES) by wiping is becoming increasingly widespread in the healthcare environment. However, DPW are rarely tested using conditions simulating their field use, and the label claims of environmental surface disinfectants seldom include wiping action. To evaluate the new E2967-15 standard test specific to wipes, particularly their ability to decontaminate surfaces and to transfer acquired contamination to clean surfaces. ASTM Standard E2967-15 was used by three independent laboratories to test the efficacy of five types of commercially available wipe products. All data generated were pulled together, and reproducibility and repeatability of the standard were measured. All the commercial DPW tested achieved a >4log10 (>99.99%) reduction in colony-forming units (CFU) of Staphylococcus aureus and Acinetobacter baumanii with 10s of wiping, but only one DPW containing 0.5% accelerated H2O2 prevented the transfer of bacteria to another surface. This newly introduced standard method represents a significant advance in assessing DPW for microbial decontamination of HTES, and should greatly assist research and development, and in making more relevant and reliable claims on marketed DPW. Copyright © 2015. Published by Elsevier Ltd.

  4. Embrittlement of Intercritically Reheated Coarse Grain Heat-Affected Zone of ASTM4130 Steel

    Science.gov (United States)

    Li, Liying; Han, Tao; Han, Bin

    2018-04-01

    In this investigation, a thermal welding simulation technique was used to investigate the microstructures and mechanical properties of the intercritically reheated coarse grain heat-affected zone (IR CGHAZ) of ASTM4130 steel. The effect of post weld heat treatment (PWHT) on the toughness of IR CGHAZ was also analyzed. The toughness of IR CGHAZ was measured by means of Charpy impact, and it is found that IR CGHAZ has the lowest toughness which is much lower than that of the base metal regardless of whether PWHT is applied or not. The as-welded IR CGHAZ is mainly composed of ferrite, martensite, and many blocky M-A constituents distributing along grain boundaries and subgrain boundaries in a near-connected network. Also, the prior austenite grains are still as coarse as those in the coarse grain heat-affected zone (CGHAZ). The presence of the blocky M-A constituents and the coarsened austenite grains result in the toughness deterioration of the as-welded IR CGHAZ. Most of the blocky M-A constituents are decomposed to granular bainite due to the effect of the PWHT. However, PWHT cannot refine the prior austenite grains. Thus, the low toughness of IR CGHAZ after PWHT can be attributed to two factors, i.e., the coarsened austenite grains, and the presence of the remaining M-A constituents and granular bainite, which are located at grain boundaries and subgrain boundaries in a near-connected network. The absorbed energy of the IR CGHAZ was increased by about 3.75 times, which means that the PWHT can effectively improve the toughness but it cannot be recovered to the level of base metal.

  5. Critical assessment of precracked specimen configuration and experimental test variables for stress corrosion testing of 7075-T6 aluminum alloy plate

    Science.gov (United States)

    Domack, M. S.

    1985-01-01

    A research program was conducted to critically assess the effects of precracked specimen configuration, stress intensity solutions, compliance relationships and other experimental test variables for stress corrosion testing of 7075-T6 aluminum alloy plate. Modified compact and double beam wedge-loaded specimens were tested and analyzed to determine the threshold stress intensity factor and stress corrosion crack growth rate. Stress intensity solutions and experimentally determined compliance relationships were developed and compared with other solutions available in the literature. Crack growth data suggests that more effective crack length measurement techniques are necessary to better characterize stress corrosion crack growth. Final load determined by specimen reloading and by compliance did not correlate well, and was considered a major source of interlaboratory variability. Test duration must be determined systematically, accounting for crack length measurement resolution, time for crack arrest, and experimental interferences. This work was conducted as part of a round robin program sponsored by ASTM committees G1.06 and E24.04 to develop a standard test method for stress corrosion testing using precracked specimens.

  6. Measurement of susceptibility artifacts with histogram-based reference value on magnetic resonance images according to standard ASTM F2119.

    Science.gov (United States)

    Heinrich, Andreas; Teichgräber, Ulf K; Güttler, Felix V

    2015-12-01

    The standard ASTM F2119 describes a test method for measuring the size of a susceptibility artifact based on the example of a passive implant. A pixel in an image is considered to be a part of an image artifact if the intensity is changed by at least 30% in the presence of a test object, compared to a reference image in which the test object is absent (reference value). The aim of this paper is to simplify and accelerate the test method using a histogram-based reference value. Four test objects were scanned parallel and perpendicular to the main magnetic field, and the largest susceptibility artifacts were measured using two methods of reference value determination (reference image-based and histogram-based reference value). The results between both methods were compared using the Mann-Whitney U-test. The difference between both reference values was 42.35 ± 23.66. The difference of artifact size was 0.64 ± 0.69 mm. The artifact sizes of both methods did not show significant differences; the p-value of the Mann-Whitney U-test was between 0.710 and 0.521. A standard-conform method for a rapid, objective, and reproducible evaluation of susceptibility artifacts could be implemented. The result of the histogram-based method does not significantly differ from the ASTM-conform method.

  7. 15 CFR 2008.19 - Classification Review Committee.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Classification Review Committee. 2008.19 Section 2008.19 Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE REGULATIONS TO IMPLEMENT E.O. 12065; OFFICE OF THE UNITED...

  8. Determination of CTOD C in Fibre Metal Laminates by ASTM and Schwalbe Methods

    Directory of Open Access Journals (Sweden)

    E.M. Castrodeza

    2002-06-01

    Full Text Available Fibre Metal Laminates (FMLs have arisen as a demand of the aeronautical industry to use thin sheets with high resistance to fatigue crack growth, high damage tolerance, corrosion resistance and high specific strength. Considering these requirements, FMLs are an advantageous choice when compared to metal alloys currently used. In order to employ FMLs in aircraft structures, designers must hold a deep knowledge of a wide set of their properties including fracture toughness. The aim of this work was to evaluate the available methodologies to measure fracture toughness at instability (CTOD C in unidirectional fibre metal laminates reinforced with aramid fibres (ARALL®. To achieve this, tests were performed to obtain traditional and Schwalbe CTODs by using experimental ASTM based techniques, especially adapted to these laminates. Results achieved point out that Schwalbe method is more appropriate and also that there are differences between both CTOD parameters.

  9. 77 FR 76164 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-12-26

    ... atmospheric pollution --Development of international measures for minimizing the transfer of invasive aquatic... pollution hazards of chemicals and preparation of consequential amendments --Additional guidelines for... DEPARTMENT OF STATE [Public Notice 8133] Shipping Coordinating Committee; Notice of Committee...

  10. A Hospital-Based Committee of Moral Philosophy to Revive Ethics.

    Science.gov (United States)

    Illy, Margaux; Le Coz, Pierre; Mege, Jean-Louis

    2017-08-15

    The Méditerranée Infection Foundation's primary goal is supporting a research hospital for the treatment of infectious diseases in Marseille. The main objective of this innovative center is to understand the mechanisms of contagion and face them. The Foundation will include a committee on moral philosophy that will accompany and supervise biomedical research. This is not a conventional ethics committee, frequently giving rise to a board's bureaucratic excesses, which might slow down creative biomedical clinical research without necessarily restricting abuses. Moral philosophy, however, can handle contemporary biomedical issues. In all its diversity, this discipline is able to enrich the debate on medical issues, thanks to many philosophical currents such as deontological ethics and consequentialism. The purpose of this committee is therefore to advance reflection on the bioethical issues encountered in biomedical research in infectious diseases, while respecting the precepts of moral philosophy. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

  11. 76 FR 17180 - Advisory Committee on International Economic Policy; Notice of Committee Renewal

    Science.gov (United States)

    2011-03-28

    ... provides information and advice on the effective integration of economic interests into overall foreign... DEPARTMENT OF STATE [Public Notice 7327] Advisory Committee on International Economic Policy... Charter of the Advisory Committee on International Economic Policy. The Committee serves in a solely...

  12. Demonstration/Validation of Tertiary Butyl Acetate (TBAC) for Hand Wipe Cleaning Applications

    Science.gov (United States)

    2010-10-01

    Visual Inspection Pass Materials Compatibility - Metals Total Immersion Corrosion – none Material Mg (AZ 31B-H24, SAE AMS...plated steel (ASTM A 153) Carbon steel (ASTM A 36) 4140 alloy steel (ASTM A 29) Al (6061, ASTM B 209...constructed from clad aluminum alloy 2024 (T3 temper) conforming to SAE -AMS-QQ-A-250/5, with dimensions of 6 by 3 by 0.025 inch (150 by 76 by 0.6 mm

  13. NCRP Program Area Committee 7: Radiation Education, Risk Communication, Outreach, and Policy.

    Science.gov (United States)

    Becker, S M; Locke, P A

    2016-02-01

    Recognizing the central importance of effective communication, education, and policy across all of the domains of radiation safety and radiation protection, the National Council on Radiation Protection and Measurements (NCRP) established a new committee in 2013. Program Area Committee 7 (PAC 7) was created to develop projects and provide guidance on "Radiation Education, Risk Communication, Outreach, and Policy." After identifying individuals with relevant expertise who were willing to serve, the Committee held its inaugural meeting in 2014. In 2015, the Committee increased its membership and began carrying out an expanded program of activities. One area of activity has involved providing input and feedback on risk communication issues to NCRP and other agencies. Another area of work has involved liaising with other NCRP committees (e.g., Council Committee 1 and PAC 3) to help incorporate psychosocial and risk communication issues into projects. Future efforts of NCRP's newest PAC are expected to include the development of authoritative reports and commentaries dealing with critical issues and challenges in radiation risk communication, education, and policy.

  14. 75 FR 27614 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-05-17

    ... Environment Protection Committee. --Consideration of the report of the Maritime Safety Committee... Session of the International Maritime Organization (IMO) Council to be held at the IMO headquarters in... HNS Convention. --World Maritime University: --IMO International Maritime Law Institute: --Protection...

  15. Low temperature storage of NAA, GA3 and 2,4-D treated citrus budsticks Armazenamento em baixa temperatura de hastes porta-borbulhas de citros tratadas com ANA, GA3 e 2,4-D

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Chamhum Salomão

    2008-01-01

    Full Text Available Cold storage allows citrus budstick conservation for several months, although gradual bud viability loss and abscission of leaf petioles is observed. This study aimed to maintain bud viability reducing leaf petiole abscission in budsticks of 'Baianinha' and 'Valencia' sweet oranges (C. sinensis Osbeck, 'Tahiti' lime (C. latifolia Tanaka, and 'Murcott' tangor (C. sinensis × C. reticulata, using NAA, GA3, 2,4-D, and low temperature storage. After a 15-minutes-immersion in distilled water and NAA and GA3 solutions at concentrations of 10, 100, 500 and 1000 µmol L-1, and 2,4-D solutions at concentrations of 1, 10, 50 and 100 µmol L-1, the shoots were stored in polyethylene bags at 5 ± 1ºC for 74 days. Percentage of leaf petiole abscission, fresh and dry matter losses, bud viability, and growth flush were evaluated. NAA and 2,4-D had the highest efficiency for petiole abscission inhibition, reaching almost 99% of success. The packaging system and shoot storage under low temperature efficiently reduced fresh and dry matter losses. Bud viability of 'Baianinha', 'Valencia' and 'Murcott' shoots was not reduced by storage, maintaining above 95% of grafting success. NAA, GA3 and 2,4-D treatments had no influence on sprout growth.O armazenamento refrigerado possibilita a conservação de hastes porta-borbulhas de citros por vários meses, embora ocorra perda gradual da viabilidade das borbulhas e abscisão dos pecíolos foliares. Este estudo objetivou manter a viabilidade das borbulhas e reduzir a abscisão dos pecíolos foliares das hastes porta-borbulhas das laranjeiras 'Baianinha' e 'Valência'(C. sinensis Osbeck, da lima ácida 'Tahiti'(C. latifolia Tanaka e da tangoreira 'Murcote' (C. sinensis × C. reticulata por meio do tratamento com ANA, GA3, 2,4-D e armazenamento refrigerado. As hastes foram imersas por 15 minutos em água destilada e em soluções com os reguladores de crescimento ANA e GA3 nas concentrações 10, 100, 500 e 1000 µmol L-1 e

  16. Beyond form and functioning: Understanding how contextual factors influence village health committees in northern India.

    Directory of Open Access Journals (Sweden)

    Kerry Scott

    Full Text Available Health committees are a common strategy to foster community participation in health. Efforts to strengthen committees often focus on technical inputs to improve committee form (e.g. representative membership and functioning (e.g. meeting procedures. However, porous and interconnected contextual spheres also mediate committee effectiveness. Using a framework for contextual analysis, we explored the contextual features that facilitated or hindered Village Health, Sanitation and Nutrition Committee (VHSNC functionality in rural north India. We conducted interviews (n = 74, focus groups (n = 18 and observation over 1.5 years. Thematic content analysis enabled the identification and grouping of themes, and detailed exploration of sub-themes. While the intervention succeeded in strengthening committee form and functioning, participant accounts illuminated the different ways in which contextual influences impinged on VHSNC efficacy. Women and marginalized groups navigated social hierarchies that curtailed their ability to assert themselves in the presence of men and powerful local families. These dynamics were not static and unchanging, illustrated by pre-existing cross-caste problem solving, and the committee's creation of opportunities for the careful violation of social norms. Resource and capacity deficits in government services limited opportunities to build relationships between health system actors and committee members and engendered mistrust of government institutions. Fragmented administrative accountability left committee members bearing responsibility for improving local health without access to stakeholders who could support or respond to their efforts. The committee's narrow authority was at odds with widespread community needs, and committee members struggled to involve diverse government services across the health, sanitation, and nutrition sectors. Multiple parallel systems (political decentralization, media and other village groups

  17. Beyond form and functioning: Understanding how contextual factors influence village health committees in northern India.

    Science.gov (United States)

    Scott, Kerry; George, Asha S; Harvey, Steven A; Mondal, Shinjini; Patel, Gupteswar; Ved, Rajani; Garimella, Surekha; Sheikh, Kabir

    2017-01-01

    Health committees are a common strategy to foster community participation in health. Efforts to strengthen committees often focus on technical inputs to improve committee form (e.g. representative membership) and functioning (e.g. meeting procedures). However, porous and interconnected contextual spheres also mediate committee effectiveness. Using a framework for contextual analysis, we explored the contextual features that facilitated or hindered Village Health, Sanitation and Nutrition Committee (VHSNC) functionality in rural north India. We conducted interviews (n = 74), focus groups (n = 18) and observation over 1.5 years. Thematic content analysis enabled the identification and grouping of themes, and detailed exploration of sub-themes. While the intervention succeeded in strengthening committee form and functioning, participant accounts illuminated the different ways in which contextual influences impinged on VHSNC efficacy. Women and marginalized groups navigated social hierarchies that curtailed their ability to assert themselves in the presence of men and powerful local families. These dynamics were not static and unchanging, illustrated by pre-existing cross-caste problem solving, and the committee's creation of opportunities for the careful violation of social norms. Resource and capacity deficits in government services limited opportunities to build relationships between health system actors and committee members and engendered mistrust of government institutions. Fragmented administrative accountability left committee members bearing responsibility for improving local health without access to stakeholders who could support or respond to their efforts. The committee's narrow authority was at odds with widespread community needs, and committee members struggled to involve diverse government services across the health, sanitation, and nutrition sectors. Multiple parallel systems (political decentralization, media and other village groups) presented

  18. Rearquitetura e informação 24 horas no IPA Metodista

    Directory of Open Access Journals (Sweden)

    Samile Andréa de Souza Vanz

    2007-04-01

    Full Text Available As bibliotecas universitárias vêm passando por mudanças há algumas décadas para acompanhar as alterações causadas pelas tecnologias disponíveis na sociedade atual. O ambiente físico da biblioteca é alvo de muitas destas mudanças, já que a informação, contida nas coleções de livros e periódicos, vem sendo transferida para acervos digitais, diminuindo a demanda por espaço físico e pelo contato bibliotecário-usuário, provocando alterações nos hábitos e cultura da comunidade universitária. Neste contexto, foi inaugurada em Porto Alegre a Biblioteca Central do IPA Metodista. O prédio, erguido no início do século passado, foi reformado para atender 24 horas, durante todo o ano. Apresentam-se aqui considerações acerca de layout, mobiliário, sinalização, iluminação, temperatura e preservação do acervo, e como isso foi pensado ao longo da reforma de um edifício destinado a funcionar ininterruptamente. Relata-se também o processo de adequação dos funcionários e do usuário ao horário integral da Biblioteca Central.

  19. 75 FR 50746 - Agenda and Notice of Public Meeting of the Nebraska Advisory Committee

    Science.gov (United States)

    2010-08-17

    ... Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that a meeting of the Nebraska... COMMISSION ON CIVIL RIGHTS Agenda and Notice of Public Meeting of the Nebraska Advisory Committee... Avenue, Suite 908, Kansas City, Kansas 66101. Persons wishing to e-mail their comments, or to present...

  20. 78 FR 29201 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-17

    ... the International Maritime Organization's (IMO) Marine Safety Committee to be held at the IMO... session of the Sub-Committee) Technical co-operation activities relating to maritime safety and security... amendments to mandatory instruments Measures to enhance maritime security Goal-based new ship construction...

  1. 77 FR 57638 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-09-18

    ... the International Maritime Organization's (IMO) Marine Safety Committee to be held at the IMO... seventeenth session of the Sub-Committee); Technical co-operation activities relating to maritime safety and... amendments to mandatory instruments; Measures to enhance maritime security; Goal-based new ship construction...

  2. Consensus, contracts, and committees.

    Science.gov (United States)

    Moreno, J D

    1991-08-01

    Following a brief account of the puzzle that ethics committees present for the Western Philosophical tradition, I will examine the possibility that social contract theory can contribute to a philosophical account of these committees. Passing through classical as well as contemporary theories, particularly Rawls' recent constructivist approach, I will argue that social contract theory places severe constraints on the authority that may legitimately be granted to ethics committees. This, I conclude, speaks more about the suitability of the theory to this level of analysis than about the ethics committee phenomenon itself.

  3. 77 FR 47491 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-08-08

    ... to the Maritime Safety Committee Members of the public may attend this meeting up to the seating... Session of the International Maritime Organization's (IMO) Sub-Committee on Dangerous Goods, Solid Cargoes... --Amendment 37-14 to the International Maritime Dangerous Goods (IMDG) Code and supplements, including...

  4. 78 FR 58596 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-09-24

    ... DEPARTMENT OF STATE [Public Notice 8481] Shipping Coordinating Committee; Notice of Committee... --External relations --Report on the status of the Convention and membership of the Organization --Report on... performs functions --Supplementary agenda items, if any The agenda items for A 28, to be considered include...

  5. 76 FR 64348 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2011-10-18

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  6. 77 FR 57085 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2012-09-17

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  7. 77 FR 6113 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2012-02-07

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  8. 78 FR 21354 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2013-04-10

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  9. Characterization of ASTM A335 P92 steel in continuous cooling cycles

    International Nuclear Information System (INIS)

    Xaubet, M. N.; Danón, C. A.; Ramos, C. P.

    2013-01-01

    The operating conditions demanded by Generation IV reactors include high temperatures, higher radiation doses and highly corrosive environments. Among the structural materials proposed both for in-core and out-of-core applications, elevated-temperature P91/P92 ferritic/martensitic steels have been considered. This work studies the transformation behavior and microstructural evolution of ASTM A335 P92 steel in continuous cooling cycles (CCT). The material was austenized at 1050 ºC and afterwards cooled down at controlled rates (300, 50 and 15 ºC/h). The determination and characterization of the phases present in the samples was performed by optical microscopy, field emission scanning electron microscopy, Mössbauer spectroscopy and X-ray diffraction. Samples whose cooling rates were on the limits of the studied range (300 and 15 ºC/h) presented completely martensitic and completely ferritic structures, respectively. The sample cooled down at intermediate rate exhibited, though, a mixed structure of martensite and ferrite. Second-phase precipitation has also been observed in all the samples. (author)

  10. 76 FR 5160 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2011-01-28

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Committee on Diversity for Communications in the Digital Age (``Diversity Committee''). ADDRESSES: A copy of...

  11. Validation of standard ASTM F2732 and comparison with ISO 11079 with respect to comfort temperature ratings for cold protective clothing.

    Science.gov (United States)

    Gao, Chuansi; Lin, Li-Yen; Halder, Amitava; Kuklane, Kalev; Holmér, Ingvar

    2015-01-01

    American standard ASTM F2732 estimates the lowest environmental temperature for thermal comfort for cold weather protective clothing. International standard ISO 11079 serves the same purpose but expresses cold stress in terms of required clothing insulation for a given cold climate. The objective of this study was to validate and compare the temperature ratings using human subject tests at two levels of metabolic rates (2 and 4 MET corresponding to 116.4 and 232.8 W/m(2)). Nine young and healthy male subjects participated in the cold exposure at 3.4 and -30.6 °C. The results showed that both standards predict similar temperature ratings for an intrinsic clothing insulation of 1.89 clo and for 2 MET activity. The predicted temperature rating for 2 MET activity is consistent with test subjects' thermophysiological responses, perceived thermal sensation and thermal comfort. For 4 MET activity, however, the whole body responses were on the cold side, particularly the responses of the extremities. ASTM F2732 is also limited due to its omission and simplification of three climatic variables (air velocity, radiant temperature and relative humidity) and exposure time in the cold which are of practical importance. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  12. Comitês de prevenção da mortalidade infantil no Paraná, Brasil: implantação e operacionalização Committees for the prevention of infant mortality in the State of Paraná, Brazil: implementation and operation

    Directory of Open Access Journals (Sweden)

    Nereu Henrique Mansano

    2004-02-01

    Full Text Available Este artigo tem por objetivo relatar a experiência de implantação e funcionamento dos Comitês de Prevenção da Mortalidade Infantil no Estado do Paraná, Brasil, apresentando as estratégias de operacionalização, composição e fluxo dos três níveis: estadual, regional e municipal. Para a efetiva implantação dessa proposta, foi necessário preparar profissionais para investigar o óbito infantil e, portanto, foram realizados treinamentos de Multiplicadores para Investigação dos Óbitos Infantis. Em dois anos, os comitês analisaram 50% dos óbitos do Estado. Pretende-se ampliar gradativamente o número de óbitos analisados, bem como dar continuidade ao acompanhamento e à reestruturação dos comitês, visando a obter melhor desempenho, mais agilidade e melhor qualidade dos dados.This article reports on the implementation and operation of committees for the prevention of infant mortality in the State of Paraná, Brazil, with the operational strategies, formation, and relations at three levels: State, regional, and municipal. To implement the committees it was necessary to train professionals to investigate infant deaths. In two years the committees analyzed 50% of the infant deaths occurring in the State. The goal is to increase the number of cases analyzed and to continue to monitor the committees' work, seeking improved performance, agility, and data quality.

  13. 78 FR 32699 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-31

    ... Session of the International Maritime Organization's (IMO) Sub-Committee on Safety of Navigation to be... --Report to the Maritime Safety Committee Members of the public may attend this meeting up to the seating... system ``BeiDou'' in the maritime field --International Telecommunication Union (ITU) matters, including...

  14. 75 FR 63888 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-10-18

    ... Work Methods and Organization of Work of the Legal Committee --Any other business --Consideration of... for the ninety-seventh Session of the International Maritime Organization's (IMO) Legal Committee to... Pollution Damage, 2001 --Consideration of a proposal to amend the limits of liability of the 1996 Protocol...

  15. Audit Committee Accounting Expert and Earnings Management with “Status” Audit Committee as Moderating Variable

    Directory of Open Access Journals (Sweden)

    Edy Suprianto

    2017-12-01

    Full Text Available This research aims to analyze the effect of accounting expert of audit committee on earnings management. This research also assesses the role of audit committee on earnings management with audit committee status as moderating variable. The population is all of firm’s which listed in Indonesia Stock Exchange. Purposive sampling is used to collect data. Data used financial statements and annual report companies from Indonesia Stock Exchange website. Moderated regression analysis (MRA is used to analyze the hypothesis. The result shows that accounting expert of audit committee has negative effect on earnings management. Yet, variable of audit committee status cannot moderate the relationship between accounting expert of audit committee and earnings management in Indonesia.

  16. 76 FR 71437 - Mutual Savings Association Advisory Committee

    Science.gov (United States)

    2011-11-17

    ... (MSAAC or Committee) formerly administered by the Office of Thrift Supervision, as it is necessary and in...: Timothy T. Ward, Deputy Comptroller for Thrift Supervision, 250 E Street SW., Washington, DC 20219. FOR... as federal savings associations (including federal savings banks); and (2) issue charters therefore...

  17. 15 CFR 2008.18 - Information Security Oversight Committee.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Information Security Oversight Committee. 2008.18 Section 2008.18 Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE REGULATIONS TO IMPLEMENT E.O. 12065; OFFICE OF...

  18. 78 FR 114 - Notice of January 23 and 24, 2013 Meeting for Fort Hancock 21st Century Advisory Committee

    Science.gov (United States)

    2013-01-02

    ... Island, NY 10305, at (718) 354-4710 or email: admin@forthancock21stcentury.org , or visit the Advisory Committee Web site at www.forthancock21stcentury.org . SUPPLEMENTARY INFORMATION: Under section 10(a)(2) of...

  19. 76 FR 12787 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2011-03-08

    ... --Any other business. --The public should be aware that Legal Committee has received a proposal to... the International Maritime Organization's (IMO) Legal Committee to be held at the IMO headquarters in... treatment of seafarers in the event of a maritime accident; --Consideration of a proposal to amend the...

  20. Empirical ranking of a wide range of WC-Co grades in terms of their abrasion resistance measured by the ASTM standard B 611-85 test

    CSIR Research Space (South Africa)

    O'Quigley, DGF

    1997-01-01

    Full Text Available This paper reports the results of a comprehensive investigation into the abrasion resistance of WC-Co alloys, as measured by the ASTM Standard B 611-85 test. The alloys ranged from 3 to 50 wt% and from 0.6 to 5 mu-m average grain size. Careful...

  1. The fatigue-crack propagation behavior of ASTM A533-B steel tested in vacuo at LWR operating temperatures

    International Nuclear Information System (INIS)

    James, L.A.

    1987-01-01

    The fatigue-crack propagation (FCP) behavior of ASTM A533-B-1 steel was characterized in vacuo at 288 0 C. Tests were conducted at two stress ratios: R = 0.05 and R = 0.7. Results of these tests were compared with results from previous studies for the same type of steel tested in an air environment, and FCP rates in vacuo were generally lower than those in air. Stress ratio effects in vacuo were not as great as those in air, and both stress ratio effects and environmental effects are discussed from the standpoint of crack closure concepts

  2. 76 FR 19176 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2011-04-06

    ...) Maritime Safety Committee (MSC 89) to be held May 11-20, 2011. The primary matters to be considered at MSC... --Technical assistance sub-programme in maritime safety and security --Capacity-building for the... business --Report of the Maritime Safety Committee Members of the public may attend these two meetings up...

  3. 76 FR 21936 - Aviation Rulemaking Advisory Committee-New Task

    Science.gov (United States)

    2011-04-19

    ... assignment for the Aviation Rulemaking Advisory Committee (ARAC). SUMMARY: The FAA assigned the Aviation... the evolving transportation needs, challenges and opportunities of the United States and global... influence the need to consider rulemaking; e.g., safety, capacity, cost, environmental impacts...

  4. VP24-Karyopherin Alpha Binding Affinities Differ between Ebolavirus Species, Influencing Interferon Inhibition and VP24 Stability.

    Science.gov (United States)

    Schwarz, Toni M; Edwards, Megan R; Diederichs, Audrey; Alinger, Joshua B; Leung, Daisy W; Amarasinghe, Gaya K; Basler, Christopher F

    2017-02-15

    Zaire ebolavirus (EBOV), Bundibugyo ebolavirus (BDBV), and Reston ebolavirus (RESTV) belong to the same genus but exhibit different virulence properties. VP24 protein, a structural protein present in all family members, blocks interferon (IFN) signaling and likely contributes to virulence. Inhibition of IFN signaling by EBOV VP24 (eVP24) involves its interaction with the NPI-1 subfamily of karyopherin alpha (KPNA) nuclear transporters. Here, we evaluated eVP24, BDBV VP24 (bVP24), and RESTV VP24 (rVP24) interactions with three NPI-1 subfamily KPNAs (KPNA1, KPNA5, and KPNA6). Using purified proteins, we demonstrated that each VP24 binds to each of the three NPI-1 KPNAs. bVP24, however, exhibited approximately 10-fold-lower KPNA binding affinity than either eVP24 or rVP24. Cell-based assays also indicate that bVP24 exhibits decreased KPNA interaction, decreased suppression of IFN induced gene expression, and a decreased half-life in transfected cells compared to eVP24 or rVP24. Amino acid sequence alignments between bVP24 and eVP24 also identified residues within and surrounding the previously defined eVP24-KPNA5 binding interface that decrease eVP24-KPNA affinity or bVP24-KPNA affinity. VP24 mutations that lead to reduced KPNA binding affinity also decrease IFN inhibition and shorten VP24 half-lives. These data identify novel functional differences in VP24-KPNA interaction and reveal a novel impact of the VP24-KPNA interaction on VP24 stability. The interaction of Ebola virus (EBOV) VP24 protein with host karyopherin alpha (KPNA) proteins blocks type I interferon (IFN) signaling, which is a central component of the host innate immune response to viral infection. Here, we quantitatively compared the interactions of VP24 proteins from EBOV and two members of the Ebolavirus genus, Bundibugyo virus (BDBV) and Reston virus (RESTV). The data reveal lower binding affinity of the BDBV VP24 (bVP24) for KPNAs and demonstrate that the interaction with KPNA modulates inhibition

  5. 75 FR 70074 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2010-11-16

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Consensus Standards, Light-Sport... accepted consensus standards relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport...

  6. Third meeting of the ITPA Co-ordinating Committee

    International Nuclear Information System (INIS)

    Campbell, D.J.; Shimada, M.

    2003-01-01

    The third meeting of the ITPA (International Tokamak Physics Activity) coordinating committee (CC), held on 24-25 October 2002 at the Max-Planck-Institut fuer Plasmaphysik, Garching. Dr. D.Campbell, Chair of the CC, noted the significant enhancement of the physics basis for burning plasma experiments, which had been achieved via the ITPA collaboration. He reported about successful assessment the ITER diagnostics requirements through ITPA Topical Groups. Dr. Aymar, ITER international team leader, summarized the status of ITER. The Topical Group chairs reported on the most significant recent developments in their areas of responsibility

  7. Standing Concertation Committee

    CERN Document Server

    HR Department

    2008-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2008 The main items discussed at the meetings of the Standing Concertation Committee on 27 February 2008 included: Short-term Saved Leave Scheme The Committee noted that, by the end of February 2008, some 600 staff had enrolled in the short-term saved leave scheme: approx. 58% had signed up for 1 slice, 14% for two slices, 5% for three slices and 23% for four slices. Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme The Committee agreed to recommend the Director-General to approve Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme. Administrative Circular No. 30 (Rev. 2) - Financial benefits upon taking up appointment and termination of contract The Committee agreed to recommend the Director-General to approve Administrative Circular No. 30 (Rev. 2) - Financial Benefits upon taking up appointment and termination of contract. Progressive Retirement Programme The Progressive Retirement Programme (PR...

  8. Determinants of nomination committee: New Zealand evidence

    Directory of Open Access Journals (Sweden)

    Md. Borhan Uddin Bhuiyan

    2011-09-01

    Full Text Available A sizable volume of corporate governance literature documents that an independent and competent board of directors matter for organizational success. In order to function effectively, board comprises of different sub-committees and the three most common sub-committees are audit committees, compensation committees and nomination committees. Surprisingly, there is a paucity of research in understanding the determinants of nomination committee notwithstanding the importance of an independent nomination committee in board selection process. We contribute to the nomination committee literature by investigating the factors associated with the determination of nomination committees in New Zealand. We find that cross-sectional variation in the firm-specific characteristics affect the existence of nomination committees. This finding casts doubt on the „one-size-fits all‟ approach of corporate governance. Our logistic regression of the nomination committee determinants indicates that firm size, governance regulation and busy directors are positively associated with the existence of nomination committees, whereas firm leverage, controlling shareholders, and director independence are negatively related to the formation of nomination committees.

  9. 11 CFR 105.2 - Place of filing; Senate candidates, their principal campaign committees, and committees...

    Science.gov (United States)

    2010-01-01

    ... principal campaign committee or by any other political committee(s) that supports only candidates for... with the Secretary of the Senate, even if the communication refers to a Senate candidate. [68 FR 420...

  10. Viewpoint: Decision-making in committees

    OpenAIRE

    Li Hao; Wing Suen

    2009-01-01

    This article reviews recent developments in the theory of committee decision-making. A committee consists of self-interested members who make a public decision by aggregating imperfect information dispersed among them according to a pre-specified decision rule. We focus on costly information acquisition, strategic information aggregation, and rules and processes that enhance the quality of the committee decision. Seeming inefficiencies of the committee decision-making process such as over-cau...

  11. [Responsibilities of ethics committees].

    Science.gov (United States)

    von Bergmann, K

    2000-05-01

    Increasing numbers of clinical research projects are submitted to ethical committees (institutional review boards) for approval. New therapeutic developments have to be evaluated by these committees to protect patients/volunteers. Thus, the responsibility of ethical committees is increasing. The "Nürnberger Kodex" and the "Declaration of Helsinki" are the background for these evaluations. According to the German drug law the physician is obligated by law to submit the protocol to such a committee. In addition, local state physician authorities require such a procedure. Important considerations during the review process besides ethical aspects are the informed consent, which should be written in an understandable form, and the obligations of the insurance.

  12. LOCAL ORGANIZING COMMITTEE

    Indian Academy of Sciences (India)

    Prof. B. B. P. Gupta

    INDIAN ACADEMY OF SCIENCES. Bengaluru. 83rd ANNUAL MEETING. 3–5 November 2017, NEHU, Shillong. LOCAL ORGANIZING COMMITTEE. Local Organizing Committee. 1. Prof. S. K. Srivastava. Chairman. Vice-Chancellor, NEHU, Shillong. 2. Prof. B. B. P. Gupta. Organising Secretary. Department of Zoology ...

  13. Committees and organizers

    Science.gov (United States)

    2011-07-01

    Chairman:Jozef Spałek (Kraków) Program Committee:Stephen Blundell (Oxford), J Michael D Coey (Dublin), Dominique Givord (Grenoble), Dariusz Kaczorowski (Wrocław), Roman Micnas (Poznań), Marek Przybylski (Halle), Ludiwig Schultz (Dresden), Vladimir Sechovsky (Prague), Jozef Spałek (Kraków), Henryk Szymczak (Warszawa), Manuel Vázquez (Madrid) Publication Committee:Dariusz Kaczorowski, Robert Podsiadły, Jozef Spałek, Henryk Szymczak, Andrzej Szytuła Local committee:Maria Bałanda, Anna Majcher, Robert Podsiadły, Michał Rams, Andrzej Ślebarski, Krzysztof Tomala Editors of the Proceedings:Jozef Spałek, Krzysztof Tomala, Danuta Goc-Jagło, Robert Podsiadły, Michał Rams, Anna Majcher Plenary, semi-plenary and tutorial speakers:Ernst Bauer (Wien)Stephen Blundell (Oxford)J Michael D Coey (Dublin)Russell P Cowburn (London)Burkard Hillebrands (Kaiserslautern)Claudine Lacroix (Grenoble)Lluís Mañosa (Barcelona)María del Carmen Muñoz (Madrid)Bernard Raveau (Caen)Pedro Schlottmann (Tallahassee)Frank Steglich (Dresden)Oliver Waldmann (Freiburg) Invited speakers within symposia: R Ahuja (Uppsala)A Kirilyuk (Nijmegen) M Albrecht (Vienna)L Theil Kuhn (Roskilde) K Bärner (Göttingen)J Liu (Dresden) U Bovensiepen (Duisburg)G Lorusso (Modena) V Buchelnikov (Chelyabinsk)M M Maska (Katowice) B Chevalier (Bordeaux)Y Mukovskii (Moscow) O Chubykalo-Fesenko (Madrid)M Pannetier-Lecoeur (Saclay) A V Chumak (Kaiserslautern)G Papavassiliou (Athens) J M D Coey (Dublin)K R Pirota (Campinas) B Dabrowski (DeKalb)P Przyslupski (Warszawa) S Das (Aveiro)M Reiffers (Košice) A del Moral (Zaragoza)K Sandeman (London) V E Demidov (Muenster)D Sander (Halle) B Djafari-Rouhani (Lille)M Sawicki (Sendai/Warsaw) H A Dürr (Menlo Park)J Schaefer (Würzburg) J Fassbender (Dresden)H Schmidt (Wetzikon) J Fontcuberta (Barcelona)J Spałek (Kraków) V Garcia (Orsay)L Straka (Helsinki) J N Gonçalves (Aveiro)A Szewczyk (Warszawa) M E Gruner (Duisburg)Y Taguchi (Wako) G Gubbiotti (Perugia)A Thiaville

  14. 75 FR 36698 - Committee Management Renewals

    Science.gov (United States)

    2010-06-28

    .... Committees Committee on Equal Opportunities in Science and Engineering, 1173 Advisory Committee for Computer and Information Science and Engineering, 1115 Advisory Committee for GPRA Performance Assessment..., and Transport Systems, 1189 Proposal Review Panel for Chemistry, 1191 Proposal Review Panel for Civil...

  15. Fusion Energy Advisory Committee: Advice and recommendations to the Department of Energy in partial response to the Charge Letter of September 24, 1991: Part D

    International Nuclear Information System (INIS)

    1992-06-01

    This document is a compilation of the written records that relate to the Fusion Energy Advisory Committee's deliberations with regard to the Letter of Charge received from the Director of Energy Research, dated September 24, 1991. During its fourth meeting, held in May 1992, FEAC provided a detailed response to that part of the charge that requested review of the potential effectiveness, and hence the advisability, of implementing a more diverse US fusion program. In particular, it responded to the paragraph: ''By May 1992, 1 would like to have your recommendations on a US concept improvement program, including relative priorities and taking into account ongoing and planned work abroad.'' In order to respond to this charge in a timely manner, FEAC established a working group, designated ''Panel number-sign 3'', which reviewed the US and international fusion programs in detail and prepared background material, included in this report as Appendix 1, to help FEAC in its deliberations

  16. Znaczenie edukacji w terapii pacjentów z astmą oskrzelową = Importance of education in treatment of patients with asthma

    Directory of Open Access Journals (Sweden)

    Iwona Czerwińska Pawluk

    2015-01-01

      Streszczenie   Edukacja pacjentów z astmą jest jednym z elementów warunkujących osiąganie celów leczenia, a w konsekwencji poprawia jakość życia chorych. Pośród wielu czynników warunkujących skuteczność edukacji prowadzonej wobec pacjentów z chorobą przewlekłą i / lub ich opiekunów na szczególną uwagę zasługują: partnerskie relacje między lekarzem a pacjentem/ jego opiekunem, dostosowanie zakresu wiedzy w zależności do wieku, poziomu wykształcenia oraz oczekiwań pacjentów/ opiekunów.  Istotna też jest ciągłość kształcenia, mająca na celu weryfikację zdobytej wiedzy  i nabytych umiejętności.  Chory na astmę musi zaakceptować chorobę i z pełnym przekonaniem podjąć zadanie współuczestnictwa w jej leczeniu. Edukacja jest podstawą interakcji między pracownikami opieki zdrowotnej a pacjentem. Może mieć charakter edukacji bezpośredniej,  szkoleń w małych grupach, seminariów, sympozjów, konferencji, dystrybucji materiałów edukacyjnych, kampanii medialnych,  portali internetowych.   Abstract   Education of patients with asthma is one of the prerequisites for achieving the goals of treatment and consequently improves the quality of life of patients. Among the many factors determining the effectiveness of education provided to patients with chronic disease and / or their carers deserve special attention: partnerships between doctor and patient / his guardian, adjust the scope of knowledge according to age, educational level and expectations of patients / caregivers. Also important is the continuity of education, in order to verify their knowledge and acquired skills. Suffering from asthma must accept the disease and confidently take on the task of participation in its treatment. Education is the basis of the interaction between health care professionals and patients. It may be of direct education, training in small groups, seminars, symposia, conferences, distribution of educational materials, media

  17. Expert Committee on College Libraries

    OpenAIRE

    Joy, V. P.; Raman Nair, R.; Ayub, M.

    1994-01-01

    Importance of library and information services in higher education was emphasized in India by many committees of Government of India from 1917 including Calcutta University Commission under Sir Michael Saddler, University Education Commission (1949) chaired by Dr. S. Radhakrishnan, Ranganathan Committee (1958), Education Commission (1966) chaired by D.S. Kothari, as well as Sen Committee, Mehrotra Committee etc of UGC. But as education being a State subject; union government could not go beyo...

  18. 78 FR 77502 - NASA Applied Sciences Advisory Committee Meeting

    Science.gov (United States)

    2013-12-23

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (13-152)] NASA Applied Sciences Advisory... Aeronautics and Space Administration (NASA) announces a meeting of the Applied Sciences Advisory Committee.... ADDRESSES: NASA Headquarters, Room 3P40, 300 E Street SW., Washington, DC 20546. FOR FURTHER INFORMATION...

  19. 78 FR 57178 - NASA Applied Sciences Advisory Committee Meeting

    Science.gov (United States)

    2013-09-17

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-115] NASA Applied Sciences Advisory... Aeronautics and Space Administration (NASA) announces a meeting of the Applied Sciences Advisory Committee.... ADDRESSES: NASA Headquarters, Room 1Q39, 300 E Street SW., Washington, DC 20546. FOR FURTHER INFORMATION...

  20. 50 CFR 453.05 - Committee meetings.

    Science.gov (United States)

    2010-10-01

    ... OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.05 Committee meetings. (a) The committee shall meet at the call of the... Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE...

  1. 76 FR 38348 - Notice of Appointment of Committee Members to the Advisory Committee on Biotechnology and 21st...

    Science.gov (United States)

    2011-06-30

    ... Service Notice of Appointment of Committee Members to the Advisory Committee on Biotechnology and 21st.... ACTION: Notice of Appointment of Committee Members to the Advisory Committee on Biotechnology and 21st... the appointment of members to the Advisory Committee on Biotechnology and 21st Century Agriculture...

  2. Biokinetic Analysis and Metabolic Fate of 2,4-D in 2,4-D-Resistant Soybean (Glycine max).

    Science.gov (United States)

    Skelton, Joshua J; Simpson, David M; Peterson, Mark A; Riechers, Dean E

    2017-07-26

    The Enlist weed control system allows the use of 2,4-D in soybean but slight necrosis in treated leaves may be observed in the field. The objectives of this research were to measure and compare uptake, translocation, and metabolism of 2,4-D in Enlist (E, resistant) and non-AAD-12 transformed (NT, sensitive) soybeans. The adjuvant from the Enlist Duo herbicide formulation (ADJ) increased 2,4-D uptake (36%) and displayed the fastest rate of uptake (U 50 = 0.2 h) among treatments. E soybean demonstrated a faster rate of 2,4-D metabolism (M 50 = 0.2 h) compared to NT soybean, but glyphosate did not affect 2,4-D metabolism. Metabolites of 2,4-D in E soybean were qualitatively different than NT. Applying 2,4-D-ethylhexyl ester instead of 2,4-D choline (a quaternary ammonium salt) eliminated visual injury to E soybean, likely due to the time required for initial de-esterification and bioactivation. Excessive 2,4-D acid concentrations in E soybean resulting from ADJ-increased uptake may significantly contribute to foliar injury.

  3. Committee on Science

    Science.gov (United States)

    SCIENCE ADVISOR WASHINGTON, DC -- Today, House Science Committee Chairman Sherwood Boehlert (R-NY23) and Advisor nominee Dr. John H. Marburger. The Senate Commerce Committee has scheduled a nomination hearing for this afternoon, and Boehlert and Grucci have been invited to testify. Dr. Marburger was nominated

  4. Standing Concertation Committee

    CERN Document Server

    HR Department

    2010-01-01

    Main issues examined at the meeting of 2 October 2009 The October 2009 meeting of the Standing Concertation Committee was entirely devoted to preparation of TREF’s meeting on 21-22 October. The Committee took note of, discussed and agreed on clarifications needed to some of the documents and presentations that the Management intended to submit and/or present to TREF on the following subjects: Equal opportunities The Committee took note of a preliminary report on equal opportunities at CERN drawn up by D. Chromek-Burckhart, the Equal Opportunities Officer, and T. Smith, Chairman of the Equal Opportunities Advisory Panel, containing in particular a proposal for a new process for resolving harassment conflicts. Technical analysis of the CERN Health Insurance Scheme - Actuary’s Report The Committee took note of a presentation by P. Charpentier, Chairman of the CERN Health Insurance Supervisory Board (CHIS Board), on the 2009 actuarial report on the CERN Health Insurance Scheme (CHIS). Th...

  5. VP24-Karyopherin Alpha Binding Affinities Differ between Ebolavirus Species, Influencing Interferon Inhibition and VP24 Stability

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, Toni M.; Edwards, Megan R.; Diederichs, Audrey; Alinger, Joshua B.; Leung, Daisy W.; Amarasinghe, Gaya K.; Basler, Christopher F.; Lyles, Douglas S.

    2016-12-14

    ABSTRACT

    Zaire ebolavirus(EBOV),Bundibugyo ebolavirus(BDBV), andReston ebolavirus(RESTV) belong to the same genus but exhibit different virulence properties. VP24 protein, a structural protein present in all family members, blocks interferon (IFN) signaling and likely contributes to virulence. Inhibition of IFN signaling by EBOV VP24 (eVP24) involves its interaction with the NPI-1 subfamily of karyopherin alpha (KPNA) nuclear transporters. Here, we evaluated eVP24, BDBV VP24 (bVP24), and RESTV VP24 (rVP24) interactions with three NPI-1 subfamily KPNAs (KPNA1, KPNA5, and KPNA6). Using purified proteins, we demonstrated that each VP24 binds to each of the three NPI-1 KPNAs. bVP24, however, exhibited approximately 10-fold-lower KPNA binding affinity than either eVP24 or rVP24. Cell-based assays also indicate that bVP24 exhibits decreased KPNA interaction, decreased suppression of IFN induced gene expression, and a decreased half-life in transfected cells compared to eVP24 or rVP24. Amino acid sequence alignments between bVP24 and eVP24 also identified residues within and surrounding the previously defined eVP24-KPNA5 binding interface that decrease eVP24-KPNA affinity or bVP24-KPNA affinity. VP24 mutations that lead to reduced KPNA binding affinity also decrease IFN inhibition and shorten VP24 half-lives. These data identify novel functional differences in VP24-KPNA interaction and reveal a novel impact of the VP24-KPNA interaction on VP24 stability.

    IMPORTANCEThe interaction of Ebola virus (EBOV) VP24 protein with host karyopherin alpha (KPNA) proteins blocks type I interferon (IFN) signaling, which is a central component of the host innate immune response to viral infection. Here, we quantitatively compared the

  6. Photoreactivation and dark repair of environmental E. coli strains following 24 kHz continuous ultrasound and UV-C irradiation.

    Science.gov (United States)

    Kaur, Jasjeet; Karthikeyan, Raghupathy; Pillai, Suresh D

    2016-07-02

    In this study, effects of 24 kHz continuous ultrasound and UV-C on inactivation and potential repair of environmental E. coli strains were studied through a culture based method and a metabolic activity assay. Three environmental E. coli strains isolated from fecal samples of feral hog and deer and treated wastewater effluent were studied and compared with a laboratory E. coli strain (ATCC® 10798). Metabolic activity of E. coli cells during the inactivation and repair period was assessed using the AlamarBlue® assay. Transmission electron microscopy assays were also performed to evaluate morphological damage of bacterial cell wall. After 24 h of photoreactivation period, laboratory E. coli strain (ATCC® 10798) reactivated by 30% and 42% in contrast to E. coli isolate from treated wastewater effluent, which reactivated by 53% and 82% after ultrasound and UV-C treatment, respectively. Possible shearing and reduction in cell size of E. coli strains exposed to ultrasound was revealed by transmission electron micrographs. Metabolic activity of E. coli strains was greatly reduced due to morphological damage to cell membrane caused by 24 kHz continuous ultrasound. Based upon experimental data and TEM micrographs, it could be concluded that ultrasound irradiation has potential in advanced water treatment and water reuse applications.

  7. SENIOR STAFF ADVANCEMENT COMMITTEE (SSAC)

    CERN Document Server

    2000-01-01

    Composition and mandateThe Senior Staff Advancement Committee is composed of members nominated ad persona by the Director-General.The Committee examines proposals from Divisions concerning promotions to grade 13 in Career Path IX, changes of career path to Career Path IX and advancements to the exceptional grade in Career path VIII.The Director-General may consult the Committee on any matter related to senior staff careers.The Committee makes its recommendations to the Director-General.

  8. Estimation of quasi-static J–R curves from Charpy energy and adaptation to ASTM E 1921 reference temperature estimation of ferritic steels

    International Nuclear Information System (INIS)

    Sreenivasan, P.R.

    2014-01-01

    Many researchers had suggested a sort of scaling procedure for predicting the quasi-static J–R curves from dynamic J–R curves obtained from instrumented Charpy V-notch (CVN) impact tests using key-curve, compliance or other procedures. Chaouadi, based on extensive tests and literature data, had quantitatively formalized the method and suggested general applicability of his method for a class of steels. In this paper, first, the Chauoadi-procedure is tried on some selected data from the literature (including the data used by Chaouadi and other workers) and an adaptation of the method is suggested using Wallin's as well as Landes's lower bound methods for upper-shelf J–R curve estimation from CVN energy. Using Chaouadi and other data as the benchmark, suitable scaling factors have been determined that enable estimation of quasi-static J–R curves from CVN energy alone, without the need for dynamic CVN J–R curves. The final formulae are given. This new method can be called modified Wallin–Landes procedure. Then this method is applied to fracture toughness and reference temperature (T 0 – ASTM E-1921) estimation from the full Charpy-transition data. The results are compared with those from the author's IGC-procedure, and modifications, if any, are suggested. Based on the new results, it is suggested that the IGC-procedure may be modified as: final T Q-est = T Q-IGC for T Q-Sch dy ≤ 20 °C (in the IGC-procedure the dividing temperature was 60 °C); and for T Q-Sch dy > 20 °C, T Q-IGC = T Q-WLm (different from the IGC-procedre and subscript WLm indicating modified Wallin–Landes procedure). For the 59 or more steels examined (including highly irradiated steels), the T Q-WL estimates at higher temperatures are consistent and conservative; a few non-conservative values are acceptably less than 20 °C, whereas other predictions show non-conservatism of up to 40–50 °C. At lower temperatures, T Q-IGC is consistently conservative and not over

  9. Estimation of quasi-static J–R curves from Charpy energy and adaptation to ASTM E 1921 reference temperature estimation of ferritic steels

    Energy Technology Data Exchange (ETDEWEB)

    Sreenivasan, P.R., E-mail: sreeprs@yahoo.co.in

    2014-04-01

    Many researchers had suggested a sort of scaling procedure for predicting the quasi-static J–R curves from dynamic J–R curves obtained from instrumented Charpy V-notch (CVN) impact tests using key-curve, compliance or other procedures. Chaouadi, based on extensive tests and literature data, had quantitatively formalized the method and suggested general applicability of his method for a class of steels. In this paper, first, the Chauoadi-procedure is tried on some selected data from the literature (including the data used by Chaouadi and other workers) and an adaptation of the method is suggested using Wallin's as well as Landes's lower bound methods for upper-shelf J–R curve estimation from CVN energy. Using Chaouadi and other data as the benchmark, suitable scaling factors have been determined that enable estimation of quasi-static J–R curves from CVN energy alone, without the need for dynamic CVN J–R curves. The final formulae are given. This new method can be called modified Wallin–Landes procedure. Then this method is applied to fracture toughness and reference temperature (T{sub 0} – ASTM E-1921) estimation from the full Charpy-transition data. The results are compared with those from the author's IGC-procedure, and modifications, if any, are suggested. Based on the new results, it is suggested that the IGC-procedure may be modified as: final T{sub Q-est} = T{sub Q-IGC} for T{sub Q-Sch}{sup dy} ≤ 20 °C (in the IGC-procedure the dividing temperature was 60 °C); and for T{sub Q-Sch}{sup dy} > 20 °C, T{sub Q-IGC} = T{sub Q-WLm} (different from the IGC-procedre and subscript WLm indicating modified Wallin–Landes procedure). For the 59 or more steels examined (including highly irradiated steels), the T{sub Q-WL} estimates at higher temperatures are consistent and conservative; a few non-conservative values are acceptably less than 20 °C, whereas other predictions show non-conservatism of up to 40–50 °C. At lower temperatures

  10. Update of technical coordinating committee activities

    International Nuclear Information System (INIS)

    Alvarado, R.A.

    1995-01-01

    The Technical Coordinating Committee has its origins in the earliest days of implementing the Low-Level Radioactive Waste Policy Act. Between 1982 and 1985, individuals in several of the states felt that coordination among the states would be beneficial to all by affording states a cost-effective method for sharing ideas, discussing alternatives, and presenting solutions to common problems. At the current time, the committee comprises members from each of the sited states. Various compacts, federal agencies, and industry groups participate in committee activities. The Low-Level Management Program provides support for the committee through the provision of logistical support and limited manpower allocation. Activities of the committee have recently focused on waste treatment and minimization technologies. The committee also has worked diligently to see the review of the 3RSTAT computer code completed. The committee has taken a position on various regulatory proposals the past year. The committee expects to continue its work until new sites are brought online

  11. Update of technical coordinating committee activities

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado, R.A.

    1995-12-31

    The Technical Coordinating Committee has its origins in the earliest days of implementing the Low-Level Radioactive Waste Policy Act. Between 1982 and 1985, individuals in several of the states felt that coordination among the states would be beneficial to all by affording states a cost-effective method for sharing ideas, discussing alternatives, and presenting solutions to common problems. At the current time, the committee comprises members from each of the sited states. Various compacts, federal agencies, and industry groups participate in committee activities. The Low-Level Management Program provides support for the committee through the provision of logistical support and limited manpower allocation. Activities of the committee have recently focused on waste treatment and minimization technologies. The committee also has worked diligently to see the review of the 3RSTAT computer code completed. The committee has taken a position on various regulatory proposals the past year. The committee expects to continue its work until new sites are brought online.

  12. Ethics Committee or Community? Examining the identity of Czech Ethics Committees in the period of transition.

    Science.gov (United States)

    Simek, Jiri; Zamykalova, Lenka; Mesanyova, Marie

    2010-09-01

    Reflecting on a three year long exploratory research of ethics committees in the Czech Republic authors discuss the current role and identity of research ethics committees. The research of Czech ethics committees focused on both self-presentation and self-understanding of ECs members, and how other stakeholders (representatives of the pharmaceutical industry) view them. The exploratory research was based on formal and informal communication with the members of the ethics committees. Members of the research team took part at six regular voluntary meetings of the ethics committees' members, organised by the Forum of Czech Ethics Committees, and at three summer schools of medical ethics. There were realised twenty-five semi-structured interviews as well as six focus group sessions and a participant observation of several regular meetings of three ethics committees. On the grounds of experience from the interviews a simple questionnaire survey was realised among the members of the ethics committees. The ethics committees comprise a community of members working voluntarily, without claims to remuneration or prestige; the unifying goal is protection of subjects of research. The principal working methods are dialogue and agreement. The members of the ethics committees thus, among other things, create an informal community, which can be to a certain extent seen as a Kantian ethical community in a weak sense. The phenomenon of ethics committees can also be described by terms of an epistemic community and a community of practice. These concepts, which are borrowed from other authors and areas, are used as a way how to think of ECs role and identity a bit differently and are meant as a contribution to the current international debate on the topic.

  13. 78 FR 35085 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2013-06-11

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Consensus Standards, Light-Sport... to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the new and...

  14. 77 FR 24251 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2012-04-23

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Consensus Standards, Light-Sport... relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the new and...

  15. 29 CFR 1960.37 - Committee organization.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Committee organization. 1960.37 Section 1960.37 Labor... MATTERS Occupational Safety and Health Committees § 1960.37 Committee organization. (a) For agencies which... organization of the agency and its collective bargaining configuration. The agency shall form committees at the...

  16. 78 FR 41115 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2013-07-09

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-074] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory... Time. ADDRESSES: NASA Headquarters, Room 7H45, 300 E Street SW., Washington, DC 20546. FOR FURTHER...

  17. 77 FR 23250 - HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations

    Science.gov (United States)

    2012-04-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations AGENCY: Office of the National Coordinator for Health Information... 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy...

  18. 76 FR 25355 - HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations

    Science.gov (United States)

    2011-05-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations AGENCY: Office of the National Coordinator for Health Information... 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy...

  19. 78 FR 29134 - HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations

    Science.gov (United States)

    2013-05-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations AGENCY: Office of the National Coordinator for Health Information... 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy...

  20. Impact of Different Normality Thresholds for 24-hour ABPM at the Primary Health Care Level.

    Science.gov (United States)

    Grezzana, Guilherme Brasil; Moraes, David William; Stein, Airton Tetelbon; Pellanda, Lucia Campos

    2017-02-01

    desfechos cardiovasculares. Médicos da atenção primária à saúde (APS) devem estar preparados para atuar adequadamente na prevenção de fatores de risco cardiovascular. No entanto, as taxas de pacientes com pressão arterial (PA) controlada continuam baixas. O impacto da reclassificação do diagnóstico de hipertensão pela utilização da monitorização ambulatorial da PA (MAPA) de 24 horas pode levar a diferentes decisões médicas na APS. Avaliar a concordância entre as PAs medidas por método convencional por médicos da APS e por MAPA de 24 horas, considerando diferentes limiares de normalidade para a MAPA de 24 horas de acordo com as recomendações da V Diretriz Brasileira de MAPA e da Diretriz da Sociedade Europeia de Hipertensão. Estudo transversal com 569 pacientes hipertensos. A PA foi medida inicialmente por médicos da APS e, posteriormente, pela MAPA de 24 horas. As medidas foram obtidas de forma independente entre os dois métodos. Os alvos terapêuticos para a PA convencional seguiram as orientações do Eighth Joint National Committee (JNC 8), das V Diretrizes Brasileiras de MAPA e das Diretrizes Europeias de Hipertensão de 2013. Foi observada uma acurácia de 54,8% (intervalo de confiança de 95% [IC95%] 0,51 - 0,58%) para a PA aferida de forma convencional quando comparada à obtida com a MAPA de 24 horas, além de uma sensibilidade de 85% (IC95% 80,8 - 88,6%), especificidade de 31,9% (IC95% 28,7 - 34,7%) e kappa de 0,155, quando consideradas as Diretrizes Europeias de Hipertensão. Quando utilizados limiares mais rígidos para caracterizar a PA como "normal" pela MAPA, foi identificada uma acurácia de 45% (IC95% 0,41 - 0,47%) pela medida convencional quando comparada à obtida pela MAPA de 24 horas, além de uma sensibilidade de 86,7% (IC95% 0,81 - 0,91%), especificidade de 29% (IC95% 0,26 - 0,30%) e kappa de 0,103. As medidas de PA avaliadas pelos médicos da APS apresentaram baixa acurácia quando comparadas às medidas pela MAPA de 24

  1. Spontaneous ignition in afterburner segment tests at an inlet temperature of 1240 K and a pressure of 1 atmosphere with ASTM jet-A fuel

    Science.gov (United States)

    Schultz, D. F.; Branstetter, J. R.

    1973-01-01

    A brief testing program was undertaken to determine if spontaneous ignition and stable combustion could be obtained in a jet engine afterburning operating with an inlet temperature of 1240 K and a pressure of 1 atmosphere with ASTM Jet-A fuel. Spontaneous ignition with 100-percent combustion efficiency and stable burning was obtained using water-cooled fuel spraybars as flameholders.

  2. Grazing incidence synchrotron X-ray diffraction and Moessbauer spectroscopy analyses of plasma nitrided ASTM F138 stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Danilo Olzon Dionysio de; Ardisson, Jose Domingos, E-mail: dolzon@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Silva, Edilaine Honorio [Studiecentrum voor Kernenergie (Belgium); Olzon-Dionysio, Maristela; Souza, Sylvio Dionysio de; Fabris, Jose Domingos [Universidade Federal dos Vales do Jequitinhonha e Mucuri (UFVJM), Diamantina, MG (Brazil); Martinez, L.G. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2016-07-01

    Full text: systematic investigation of samples of plasma-nitriding austenitic stainless steels ASTM F138 and AISI 316L is reported. The surface treatment of the steels through plasma-nitriding was used to improve further the hardness, wear and corrosion resistance of these stainless steels. The resulting layered crystallographic structure actually corresponds to several phases with close cell parameters, making their identification and quantification a real experimental challenge. The ASTM F138 and AISI 316L stainless steel disks were plasma nitrided for 4 h at 400 deg C in a 80% H{sub 2} -20% N2 atmosphere at 6 torr, using plasma current frequencies between 6 and 100 kHz. Data of Moessbauer (CEMS and CXMS) and grazing incidence synchrotron X-ray diffraction (XRD-SR) were systematically collected. The nitrided layer thickness were not in general influenced by the plasma frequency, except at 12 kHz, which produced a layer thickness of approximately 8.0 mm, being in average 40% thicker than for the other samples. CXMS and CEMS Moessbauer spectra for this 12 kHz-sample show a much more pronounced magnetic resonance lines than for the other samples. The Fe{sub 4}N phase presents a single magnetic hyperfine interaction; the other two (Fe{sub 2-3}N and the expanded austenite) present both paramagnetic and magnetic components, even though their hyperfine parameters may not be safely separated. We also present the results of XRD-SR that were probed at several depths. The data from these techniques may be consistently correlated and this leads to an improved model to explain the structure of the nitrided layers. (author)

  3. RESISTÊNCIA MECÂNICA E À UMIDADE DE PAINÉIS AGLOMERADOS COM PARTÍCULAS DE MADEIRA DE DIFERENTES DIMENSÕES

    Directory of Open Access Journals (Sweden)

    Clovis Roberto Haselein

    2002-07-01

    Full Text Available Neste trabalho, foram confeccionadas e testadas chapas aglomeradas estruturais utilizando partículas de Pinus elliottii Engelm com dimensões nominais de 110, 75 e 40 mm de comprimento, 0,5 e 1,0 mm de espessura e 20 mm de largura. As partículas foram orientadas ao acaso em moldes sem-fundo com dimensões de 50 x 50 x 20 cm. Os colchões foram prensados a 1800C por 10 minutos até atingir espessura de 9,5 mm e densidade de, aproximadamente, 0,7 g/cm3. O adesivo utilizado foi 8% (em relação ao peso seco das partículas de tanino-formaldeído. Foram analisadas as propriedades de flexão estática, ligação interna, resistência ao arrancamento de parafusos, dureza Janka, inchamento em espessura e absorção d’água para 2 e 24 horas de imersão. Todos os testes foram realizados segundo a norma americana ASTM D 1037 (1995. As propriedades de flexão estática (MOR e MOE aumentaram com o aumento do comprimento e diminuição da espessura das partículas. Já o inchamento em espessura e a resistência ao arrancamento de parafusos aumentaram com o aumento da espessura das partículas.

  4. 76 FR 8712 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Science.gov (United States)

    2011-02-15

    ... Section 103 of the NEHRP Reauthorization Act of 2004 (Pub. L. 108-360). The Committee is composed of 15... submit your full name, e-mail address, and phone number to Michelle Harman. Non-U.S. citizens must also...

  5. 75 FR 8042 - Advisory Committee on Earthquake Hazards Reduction Meeting

    Science.gov (United States)

    2010-02-23

    ... Section 103 of the NEHRP Reauthorization Act of 2004 (Pub. L. 108-360). The Committee is composed of 15... name, time of arrival, e-mail address, and phone number to Michelle Harman. Non-U.S. citizens must also...

  6. 39 CFR 5.2 - Committee procedure.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Committee procedure. 5.2 Section 5.2 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE COMMITTEES (ARTICLE V) § 5.2 Committee procedure. Each committee establishes its own rules of procedure, consistent with...

  7. Rebuilding a Research Ethics Committee

    Science.gov (United States)

    Biggs, John S. G.; Marchesi, August

    2013-01-01

    The principal ethics committee in Australia's Capital, Canberra, underwent a major revision in the last three years based on changes debated in the literature. Committee or Board structure varies widely; regulations determining minimum size and membership differ between countries. Issues such as the effectiveness of committee management,…

  8. Audit committee: Some evidence from Malaysia.

    Directory of Open Access Journals (Sweden)

    Zulkarnain Muhamad Sori

    2006-11-01

    Full Text Available This study aimed to investigate the perceptions of senior managers of Malaysian publicly listed companies on issues relating to audit committee authority and effectiveness. Questionnaire survey technique was employed to seek the respondents perceptions on five issues, namely audit committee appoints the auditor, audit committee determines and reviews audit fees, audit committee determines and reviews the auditor’s scope and duties, and audit committee’s reports and meetings. The majority of respondents agreed that auditor would be more effective and independent if audit committee assumed the responsibility to appoint the auditor, determine and review the audit fees, and determine and review the external auditor’s scope and duties. It is also found that disclosure of audit committee report and quarterly meeting would enhance the perceptions of users of financial statement concerning the effectiveness of the committee.

  9. Organizing Committee Advisory Committee 187

    Indian Academy of Sciences (India)

    Organizing Committee. V M Datar (Chairman). Bhabha Atomic Research Centre, Mumbai, India. D C Biswas (Convener). Bhabha Atomic Research Centre, Mumbai, India. K Mahata (Secretary). Bhabha Atomic Research Centre, Mumbai, India. Z Ahmed. Bhabha Atomic Research Centre, Mumbai, India. P V Bhagwat.

  10. ASTM Committee G-4 metals flammability test program - Data and discussion

    Science.gov (United States)

    Stoltzfus, Joel M.; Homa, John M.; Williams, Ralph E.; Benz, Frank J.

    1988-01-01

    Results of metals flammability tests performed on twenty-six metals in the NASA/White Sands Test Facility are discussed together with the test systems. The promoted combustion and ignition characteristics of these metals are described, and the metals are ranked according to their suitability for use in oxygen systems. In general, alloys with high copper and nickel contents and low iron content were found to rank higher than those that had high iron content, while alloys that had high aluminum content were ranked the lowest.

  11. Heat treatment evaluation of steel ASTM A-131 grade A by X-Ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira Junior, Francisco; Feio, Luciana Gaspar; Costa, Ednelson Silva; Rodrigues, Lino Alberto Soares; Braga, Eduardo Magalhaes, E-mail: juniorferrer93@gmail.com [Universidade Federal do Pará (UFPA), Belém, PA (Brazil)

    2016-07-01

    Full text: This study evaluates the residual stress of naval steel ASTM A-131 grade A before and after heat treatment. Residual stresses were determined by the technique of X-ray diffraction (XRD). Before heat treatment the residual stress measurements were made at 36 (thirty six) points distributed in a specimen with dimensions of 400 mm long, 200 mm wide and 95 mm thick, then the plate under analysis was brought to the oven for the implementation of heat treatment. To check the performance of the heat treatment, the plate was again subjected to XRD measurements of the same points previously measured in order to compare the residual stresses. As result, there was a reduction of residual stresses with the application of heat treatment. References: [1] COLPAERT, H. Metalografia dos Produtos Siderurgicos Comuns. 4 Edição. Editora Blucher. Saõ Paulo, SP, 2008. [2] HILL, R. Princípios de Metalurgia Física, 1992. (author)

  12. 75 FR 22757 - Federal Advisory Committee; Army Education Advisory Committee; Charter Renewal

    Science.gov (United States)

    2010-04-30

    ..., school curriculums, educational philosophy and objectives, program effectiveness, facilities, staff and... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Army Education Advisory... Defense gives notice that it is renewing the charter for the Army Education Advisory Committee (hereafter...

  13. The new ASTM Manual for scrubber linings the evolution of a consensus guide

    International Nuclear Information System (INIS)

    Spires, G.V.; Cavallo, J.R.

    1984-01-01

    Faced with spiraling fuel oil costs, power utilities turned to abundant and inexpensive domestic coal and lignite. Conversions and new units designed to burn solid fossil fuels were pursued at a near crisis pace to get out from under the economic penalties associated with the continued use of oil. Coal contains much more sulfur than oil; EPA limitations on SO 2 necessitated costly flue gas desulfurization (FGD) systems when burning coal. Scrubbed gas presented a particularly corrosive environment in and downstream from the FGD system. Problems which often accompany a new technology were soon evident. Materials and linings initially selected were often seen to be inadequate. Severe and rapid degradation was commonplace. This paper traces the development of the recently published ASTM Manual of Protective Linings From Flue Gas Desulfurization System. The scope of the Manual is outlined and some of the more commonly used FGD lining systems are reviewed. Finally some views on the impact of foreseeable changes in regulations and FGD technology on the use and maintenance of FGD system linings are discussed

  14. Stress corrosion (Astm G30-90 standard) in 08x18H10T stainless steel of nuclear fuel storage pool in WWER reactors; Corrosion bajo esfuerzo (Norma ASTM G30-90) en acero inoxidable 08x18H10T de piscinas de almacenamiento de combustible nuclear en reactores V.V.E.R

    Energy Technology Data Exchange (ETDEWEB)

    Herrera, V.; Zamora R, L. [Centro de Estudios Aplicados al Desarrollo Nuclear (Cuba)

    1997-07-01

    At the water storage of the irradiated nuclear fuel has been an important factor in its management. The actual pools have its walls covered with inoxidable steel and heat exchangers to dissipate the residual heat from fuel. It is essential to control the water purity to eliminate those conditions which aid to the corrosion process in fuel and at related components. The steel used in this research was obtained from an austenitic inoxidizable steel standardized with titanium 08x18H10T (Type 321) similar to one of the two steel coatings used to cover walls and the pools floor. the test consisted in the specimen deformation through an U ply according to the Astm G30-90 standard. The exposition of the deformed specimen it was realized in simulated conditions to the chemical regime used in pools. (Author)

  15. 41 CFR 51-2.5 - Committee decision.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Committee decision. 51-2... Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 2-COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED § 51-2.5 Committee decision. The Committee considers the...

  16. Translation and Adaptation of the Genetic Counselling Outcome Scale (GCOS-24) for Use in Denmark

    DEFF Research Database (Denmark)

    Diness, Birgitte Rode; Overbeck, Gritt; Hjortshøj, Tina Duelund

    2017-01-01

    Outcome measurement in clinical genetics is challenging. Robust outcome measures are needed to provide evidence to support service development within genetic counseling. The Genetic Counselling Outcome Scale (GCOS-24), a Patient Reported Outcome Measure (PROM), was developed in English...... and validated with clinical genetics patients in the British NHS. This study reports the translation and adaptation of the GCOS-24 for use in Denmark. GCOS-24 was translated and back translated, supervised by an expert committee. Feedback on the first version was collected from genetic counseling patients...

  17. Personality and culture, the Social Science Research Council, and liberal social engineering: the Advisory Committee on Personality and Culture, 1930-1934.

    Science.gov (United States)

    Bryson, Dennis

    2009-01-01

    The field of personality and culture was given a significant impetus during the 1930s with the establishment of the Advisory Committee on Personality and Culture (1930-1934) by the Social Science Research Council. This committee provided an early formulation of personality and culture that emphasized the interdisciplinary focus on the processes of personality formation within small-scale social settings. The committee's formulation also coupled personality and culture with a liberal social engineering approach geared toward cultural reconstruction. Major social scientists and clinicians were involved in the activities of the committee, including Edward Sapir, W. I. Thomas, E. W. Burgess, E. A. Bott, Robert S. Woodworth, Harry Stack Sullivan, C. M. Hincks, and Adolf Meyer.

  18. 78 FR 20357 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2013-04-04

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-037] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory...:30 a.m. to 3:00 p.m., Local Time. ADDRESSES: NASA Headquarters, 300 E Street SW., Room 6H45...

  19. 76 FR 17158 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2011-03-28

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (11-026)] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory....m. to 2 p.m., Local Time. ADDRESSES: NASA Headquarters, 300 E Street, SW., Room 5H45, Washington, DC...

  20. 78 FR 39289 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2013-07-01

    ... for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide... committees, Supplier Diversity, Market Entry Barriers, Unlicensed Devices and EEO Enforcement will report on...

  1. 75 FR 70004 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2010-11-16

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee'') will hold a meeting on Thursday, December 2, 2010 at...

  2. 75 FR 60458 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2010-09-30

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee'') will hold a meeting on Thursday, October 14, 2010 at...

  3. 75 FR 53694 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2010-09-01

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee'') will hold a meeting on Tuesday, September 21, 2010 at...

  4. Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This practice covers the methodology, summarized in Annex A1, to be used in the analysis and interpretation of neutron exposure data obtained from LWR pressure vessel surveillance programs; and, based on the results of that analysis, establishes a formalism to be used to evaluate present and future condition of the pressure vessel and its support structures (1-70). 1.2 This practice relies on, and ties together, the application of several supporting ASTM standard practices, guides, and methods (see Master Matrix E 706) (1, 5, 13, 48, 49). In order to make this practice at least partially self-contained, a moderate amount of discussion is provided in areas relating to ASTM and other documents. Support subject areas that are discussed include reactor physics calculations, dosimeter selection and analysis, and exposure units. Note 1—(Figure 1 is deleted in the latest update. The user is refered to Master Matrix E 706 for the latest figure of the standards interconnectivity). 1.3 This practice is restri...

  5. Business ethics in ethics committees?

    Science.gov (United States)

    Boyle, P

    1990-01-01

    The "Ethics committees" column in this issue of the Hastings Center Report features an introduction by Cynthia B. Cohen and four brief commentaries on the roles hospital ethics committees may play in the making of institutional and public health care policy in the 1990s. The pros and cons of a broader, more public role for ethics committees in reconciling the business and patient care aspects of health care delivery are debated by Cohen in "Ethics committees as corporate and public policy advocates," and by Philip Boyle in this article. Boyle is an associate for ethical studies at The Hastings Center.

  6. 75 FR 20844 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2010-04-21

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee'') will hold a meeting on Tuesday, June 15, 2010 at 2:00...

  7. [Institutional ethics committees in Mexico: the ambiguous boundary between health care ethics and research ethics].

    Science.gov (United States)

    Valdez-Martínez, Edith; Lifshitz-Guinzberg, Alberto; Medesigo-Micete, José; Bedolla, Miguel

    2008-08-01

    To identify ethics committees in medical practice in Mexico and possible implications stemming from their composition and functions. A cross-sectional descriptive study was conducted from January-December 2005. A survey was sent by e-mail to the hospitals and family medicine centers with at 10 practices within the Mexican Institute for Social Security (Instituto Mexicano del Seguro Social) (n=437) and the Institute for Security and Social Services for State Employees (Seguridad y Servicios Sociales de los Trabajadores del Estado) (n=167) and to the Mexican Ministry of Health's most important health care centers (n=15). The following items were analyzed: name of the committee, date of formation, current status, composition, functions, and level of authority. In all, 116 committees were identified, with various names. Of these, 101 (87.1%) were active. The committees were formed from 1985-2006, with a spike occurring in 2004-2005. Of the active committees, 59 (58.4%) were charged with ethical problems/dilemmas related to clinical practice as well as those related to research projects. Of the committee members, 357 (59.0%) held managing positions in the establishment to which the committee pertained; most were medical professionals (71.5%), followed by nursing staff (11.9%). Among the members of the active committees, 77.9% had not received training in ethics. Legal conflicts can be expected, mainly within the organizations whose committees have the authority to determine a course of action. An integrated plan is needed that will set standards for the composition and proceedings of Mexico's ethics committees and the improved training of committee members.

  8. Porównanie stężeń tlenku azotu w powietrzu wydychanym i pH kondensatu powietrza wydychanego u dzieci chorych na astmę i zdrowych

    Directory of Open Access Journals (Sweden)

    Bolesław Kalicki

    2009-12-01

    Full Text Available Istotą astmy jest proces zapalny toczący się w śluzówce drzewa oskrzelowego. Parametry oceniające nasilenie tego procesu stosowane do tej pory są mało obiektywne i trudne do uzyskania, zwłaszcza u dzieci. Możliwość rzetelnej oceny intensywności tego procesu wpłynęłaby na dokładniejszą diagnozę pacjenta i zobiektywizowałaby postępowanie lecznicze. W ostatnim okresie ukazało się wiele prac poświęconych poszukiwaniu takich narzędzi, które w łatwy, nieinwazyjny i tani sposób odzwierciedlą stan zapalny w układzie oddechowym. Za jeden z takich wykładników uznawany jest pomiar stężenia tlenku azotu (NO w wydychanym powietrzu. Jego stężenie zależy od aktywności iNOS – enzymu aktywowanego między innymi przez czynniki zapalne. Oznacza się go metodami chemiluminescencyjnymi. Wzrost stężenia sugeruje nasilenie zapalenia oskrzeli. Innym markerem stanu zapalnego branym pod uwagę w wielu badaniach jest pH kondensatu powietrza wydychanego (KPW, który jest pochodną płynu pokrywającego powierzchnię pęcherzyków płucnych. Spośród wielu substancji w nim rozpuszczonych oznaczanie jego pH jest najłatwiejszą metodą analizy KPW. Zauważono, że pH tego płynu spada w chorobach przebiegających z nasileniem stanu zapalnego w płucach. Obie wymienione metody są stosunkowo tanie i proste do zastosowania (również w populacji dziecięcej. Celem niniejszego badania była ocena stężeń NO w powietrzu wydychanym i pH KPW u dzieci z rozpoznaną astmą w okresie zaostrzenia choroby i porównanie tych wyników z wartościami uzyskanymi w grupie dzieci zdrowych. Do badań włączono 26 dzieci w wieku od 8 do 17 lat. Pomiędzy obiema grupami dzieci – zdrowych i chorych, uzyskano statystycznie znamienną różnicę wyników zarówno stężenia NO w powietrzu wydychanym, jak i pH KPW. W przypadku zaostrzenia astmy stężenie NO rosło, a pH KPW malało, oba parametry korelowały ze sobą. Wyniki te pozostają w zgodzie

  9. Hospital ethics committees in Israel: structure, function and heterogeneity in the setting of statutory ethics committees

    OpenAIRE

    Wenger, N; Golan, O; Shalev, C; Glick, S

    2002-01-01

    Objectives: Hospital ethics committees increasingly affect medical care worldwide, yet there has been little evaluation of these bodies. Israel has the distinction of having ethics committees legally required by a Patients' Rights Act. We studied the development of ethics committees in this legal environment.

  10. 77 FR 6824 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2012-02-09

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-010] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory....m. to 2 p.m., Local Time. ADDRESSES: NASA Headquarters, 300 E Street SW., Room 3H46 and 7H45...

  11. 76 FR 59446 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2011-09-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice11-084] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory..., 2011, 8:30 a.m. to 2 p.m., Local Time. ADDRESSES: NASA Headquarters, 300 E Street, SW., Room 3H46...

  12. Application of Response Surface Methodology for Modeling of Postweld Heat Treatment Process in a Pressure Vessel Steel ASTM A516 Grade 70.

    Science.gov (United States)

    Peasura, Prachya

    2015-01-01

    This research studied the application of the response surface methodology (RSM) and central composite design (CCD) experiment in mathematical model and optimizes postweld heat treatment (PWHT). The material of study is a pressure vessel steel ASTM A516 grade 70 that is used for gas metal arc welding. PWHT parameters examined in this study included PWHT temperatures and time. The resulting materials were examined using CCD experiment and the RSM to determine the resulting material tensile strength test, observed with optical microscopy and scanning electron microscopy. The experimental results show that using a full quadratic model with the proposed mathematical model is YTS = -285.521 + 15.706X1 + 2.514X2 - 0.004X1(2) - 0.001X2(2) - 0.029X1X2. Tensile strength parameters of PWHT were optimized PWHT time of 5.00 hr and PWHT temperature of 645.75°C. The results show that the PWHT time is the dominant mechanism used to modify the tensile strength compared to the PWHT temperatures. This phenomenon could be explained by the fact that pearlite can contribute to higher tensile strength. Pearlite has an intensity, which results in increased material tensile strength. The research described here can be used as material data on PWHT parameters for an ASTM A516 grade 70 weld.

  13. 24 CFR Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook...

    Science.gov (United States)

    2010-04-01

    ... 19103, Telephone (215) 299-5400. ASTM C 12-91 Standard Practice for Installing Vitrified Clay Pipe Lines... C 216-91c Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) ASTM.../78 77a Cast Iron Sanitary Drainage System with Hubless Pipe and Fittings—3/28/80 78 Polyethylene (PE...

  14. Production and purification of immunologically active core protein p24 from HIV-1 fused to ricin toxin B subunit in E. coli

    Directory of Open Access Journals (Sweden)

    Gómez-Lim Miguel A

    2009-02-01

    Full Text Available Abstract Background Gag protein from HIV-1 is a polyprotein of 55 kDa, which, during viral maturation, is cleaved to release matrix p17, core p24 and nucleocapsid proteins. The p24 antigen contains epitopes that prime helper CD4 T-cells, which have been demonstrated to be protective and it can elicit lymphocyte proliferation. Thus, p24 is likely to be an integral part of any multicomponent HIV vaccine. The availability of an optimal adjuvant and carrier to enhance antiviral responses may accelerate the development of a vaccine candidate against HIV. The aim of this study was to investigate the adjuvant-carrier properties of the B ricin subunit (RTB when fused to p24. Results A fusion between ricin toxin B subunit and p24 HIV (RTB/p24 was expressed in E. coli. Affinity chromatography was used for purification of p24 alone and RTB/p24 from cytosolic fractions. Biological activity of RTB/p24 was determined by ELISA and affinity chromatography using the artificial receptor glycoprotein asialofetuin. Both assays have demonstrated that RTB/p24 is able to interact with complex sugars, suggesting that the chimeric protein retains lectin activity. Also, RTB/p24 was demonstrated to be immunologically active in mice. Two weeks after intraperitoneal inoculation with RTB/p24 without an adjuvant, a strong anti-p24 immune response was detected. The levels of the antibodies were comparable to those found in mice immunized with p24 alone in the presence of Freund adjuvant. RTB/p24 inoculated intranasally in mice, also elicited significant immune responses to p24, although the response was not as strong as that obtained in mice immunized with p24 in the presence of the mucosal adjuvant cholera toxin. Conclusion In this work, we report the expression in E. coli of HIV-1 p24 fused to the subunit B of ricin toxin. The high levels of antibodies obtained after intranasal and intraperitoneal immunization of mice demonstrate the adjuvant-carrier properties of RTB when

  15. 76 FR 41274 - Committee Name: Homeland Security Science and Technology Advisory Committee (HSSTAC)

    Science.gov (United States)

    2011-07-13

    ..., cyber-security, knowledge management and how best to leverage related technologies funded by other... Science and Technology Advisory Committee (HSSTAC) ACTION: Committee Management; Notice of Federal... FURTHER INFORMATION CONTACT: Mary Hanson, HSSTAC Executive Director, Science and Technology Directorate...

  16. The Effect of Independence Audit Committee on Earnings Management: The Case in French

    OpenAIRE

    Anis Ben Amar

    2014-01-01

    Corporate failures and accounting scandals (e.g. Enron, Worldcom cases etc.) have provided a strong incentive to regulators to consider the major role that audit committees can play. This current study extends the Piot and Janin (2007) study and examines the relationship between independence audit committee and the proceeded measures of earnings management. Using a sample consisting of 279 firm- year observations concerning the years ranging from 2002 to 2005, the results of this study shows ...

  17. Fusion Energy Advisory Committee: Advice and recommendations to the Department of Energy in partial response to the Charge Letter of September 24, 1991: Part C

    International Nuclear Information System (INIS)

    1992-04-01

    This document is a compilation of the written records that relate to the Fusion Energy Advisory Committee's deliberations with regard to the Letter of Charge received from the Director of Energy Research, dated September 24, 1991. During its third meeting, held in March 1992, FEAC provided a detailed response to that part of the charge that pertained to the period between the cessation of experiments on TFTR and the startup of experiments on ITER. In particular, it responded to the paragraph: ''By March 1992, 1 would like your views on how to fill the gap between the completion of TFTR work and the planned start of ITER operation. In addressing this issue, please include consideration of international collaboration, both here and abroad.'' In order to respond to this charge in a timely manner, FEAC established a working group, designated ''Panel number-sign 2'', which reviewed the proposed ITER program in detail and prepared background material, included in this report as Appendix II, to help FEAC in its deliberations

  18. Rare birds in Slovenia in 2016 – Slovenian Rarities Committee Report

    Directory of Open Access Journals (Sweden)

    Hanžel Jurij

    2017-11-01

    Full Text Available This report by the Slovenian Rarities Committee presents records of rare bird species in Slovenia in 2016, with some addenda for previous years. The numbers in brackets refer to the number of records (first number and individuals (second number recorded between 1 Jan 1950 and 31 Dec 2015. Since 1 Jan 2013, submission to the Committee has been required for 37 additional species, 17 of which are regional rarities. Records of these species are not numbered, since records from previous years were not collected by the Committee. Two new species, Scopoli’s Shearwater Calonectris diomedea and Arctic Tern Sterna paradisaea, were added to Category A. Other notable observations were the second record of Lesser Yellowlegs Tringa flavipes, third and fourth records of Pallid Swift Apus pallidus, fifth to seventh records of Long-legged Buzzard Buteo rufinus and the sixth and seventh records of Gannet Morus bassanus. Twelve records of Pallid Harrier Circus macrourus are an all-time annual high. Among Category E species, the Hooded Merganser Lophodytes cucullatus was recorded for the second time. The list of birds recorded in Slovenia (as of 31 Dec 2016 contains 388 species (373 in Category A, 6 in Category B, 9 exclusively in Category C; 4 species are both in Categories A and C. Category D contains 6 species, while Category E contains 38, two of which are classified into Subcategory E*. These two categories are not part of the list.

  19. 76 FR 37380 - Committee Management Renewals

    Science.gov (United States)

    2011-06-27

    ... Advisory Committee for Biological Sciences, 1110 Advisory Committee for Education and Human Resources, 1119...) management officials having responsibility for the advisory committees listed below have determined that... Review Panel for Social Behavioral and Economic Sciences, 1766 Proposal Review Panel for Biological...

  20. 78 FR 38736 - Committee Management; Renewals

    Science.gov (United States)

    2013-06-27

    ... Cyberinfrastructure, 25150 Advisory Committee for Education and Human Resources, 1119 Advisory Committee for...) management officials having responsibility for the advisory committees listed below have determined that... Settings, 59 Proposal Review Panel for Social, Behavioral and Economic Sciences, 1766 Proposal Review Panel...

  1. 76 FR 8380 - NASA Advisory Council; Science Committee; Meeting

    Science.gov (United States)

    2011-02-14

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (11-114)] NASA Advisory Council; Science... Aeronautics and Space Administration (NASA) announces a meeting of the Science Committee of the NASA Advisory...:30 a.m. to 2 p.m., Local Time. ADDRESSES: NASA Headquarters, 300 E Street, SW., Rooms 9H40 and 3H46...

  2. 78 FR 58537 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Meeting

    Science.gov (United States)

    2013-09-24

    ... Committee will provide advice and recommendations on initiatives to expand access to banking services by... accounts, financial education strategies, steps to support household savings, mobile financial services... . This service is free and available to anyone with the following systems requirements: http://www.vodium...

  3. Hydrogen embrittlement of ASTM A 203 D nuclear structural steel

    International Nuclear Information System (INIS)

    Chakravartty, J.K.; Prasad, G.E.; Sinha, T.K.; Asundi, M.K.

    1986-01-01

    The influence of hydrogen on the mechanical properties of ASTM A 203 D nuclear structural steel has been studied by tension, bend and delayed-failure tests at room temperature. While the tension tests of hydrogen charged unnotched specimens reveal no change in ultimate strength and ductility, the effect of hydrogen is manifested in notched specimens (tensile and bend) as a decrease in ultimate strength (maximum load in bend test) and ductility; the effect increases with increasing hydrogen content. It is observed that for a given hydrogen concentration, the decrease in bend ductility is remarkably large compared to that in tensile ductility. Hydrogen charging does not cause any delayed-failure upto 200 h under an applied tensile stress, 0.85 times the notch tensile strength. However delayed failure occurs in hydrogen charged bend samples in less than 10 h under an applied bending load of about 0.80 times of the uncharged maximum load. Fractographs of hydrogen charged unnotched specimens show ductile dimple fracture, while those of notched tension and bend specimens under hydrogen-charged conditions show a mixture of ductile dimple and quasi-cleavage cracking. The proportion of quasi-cleavage cracking increases with increasing hydrogen content and this fracture mode is more predominant in bend specimens. The changes in tensile properties and fracture modes can reasonably be explained by existing theories of hydrogen embrittlement. An attempt is made to explain the significant difference in the embrittlement susceptibility of bend and tensile specimens in the light of difference in triaxiality and plastic zone size near the notch tip. (orig.)

  4. 7 CFR 948.51 - Colorado Potato Committee.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Colorado Potato Committee. 948.51 Section 948.51... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Order Regulating Handling Committees § 948.51 Colorado Potato Committee. The Colorado Potato Committee...

  5. Resistência mecânica e à umidade de painéis aglomerados com partículas de madeira de diferentes dimensões.

    Directory of Open Access Journals (Sweden)

    Clovis Roberto Haselein

    2010-08-01

    Full Text Available Neste trabalho, foram confeccionadas e testadas chapas aglomeradas estruturais utilizando partículas de Pinus elliottii Engelm com dimensões nominais de 110, 75 e 40 mm de comprimento, 0,5 e 1,0 mm de espessura e 20 mm de largura. As partículas foram orientadas ao acaso em moldes sem-fundo com dimensões de 50 x 50 x 20 cm. Os colchões foram prensados a 1800C por 10 minutos até atingir espessura de 9,5 mm e densidade de, aproximadamente, 0,7 g/cm3. O adesivo utilizado foi 8% (em relação ao peso seco das partículas de tanino-formaldeído. Foram analisadas as propriedades de flexão estática, ligação interna, resistência ao arrancamento de parafusos, dureza Janka, inchamento em espessura e absorção d'água para 2 e 24 horas de imersão. Todos os testes foram realizados segundo a norma americana ASTM D 1037 (1995. As propriedades de flexão estática (MOR e MOE aumentaram com o aumento do comprimento e diminuição da espessura das partículas. Já o inchamento em espessura e a resistência ao arrancamento de parafusos aumentaram com o aumento da espessura das partículas.

  6. Investigating the effect of coil model losses on computational electromagnetic exposure of an ASTM phantom at 64 MHz MRI.

    Science.gov (United States)

    Kozlov, Mikhail; Horner, Marc; Kainz, Wolfgang; Angelone, Leonardo M

    2017-07-01

    The goal of this work is to investigate the effect of coil losses on the electromagnetic field generated in an ASTM phantom by a birdcage coil. The study was based on different numerical implementations of an RF body coil at 64 MHz, using the same 3D EM and RF circuit co-simulation procedure. The coil quality factor was evaluated with respect to losses due to power feed mismatch and to resistive losses of the coil components. The results of the study showed that the magnetic field at the coil iso-center, normalized to the square root of the whole body specific absorption rate, depends on the coil quality factor.

  7. Recent development in the ASME O and M committee codes, standards, and guides

    International Nuclear Information System (INIS)

    Rowley, C.W.

    1999-01-01

    The ASME O and M Committee continues to expand and update its code, standards, and guides as contained in the ASME OM Code and the ASME OM Standards/Guides. This paper will describe recent changes to these two ASME documents, including technical inquiries, code cases, and the major reformat of the ASME OM Code 1998 Edition. Also two new Parts to the ASME OM S/G will be discussed: OM Part 23 and OM Part 24, which are close to being initially published. A third new Part to the ASME OM S/G has been authorized and has recently started to get organized: Part 26, 'Thermal Calibration of RTDs'. In addition this paper will describe the future plans for these two documents as provided in the O and M Committee Strategic Plan. (author)

  8. 76 FR 71033 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Meeting

    Science.gov (United States)

    2011-11-16

    ... Committee will provide advice and recommendations on initiatives to expand access to banking services by... services for the underserved, including the role of mobile financial services technology in economic... . This service is free and available to anyone with the following systems requirements: http://www.vodium...

  9. Pesticide Program Dialogue Committee (PPDC)

    Science.gov (United States)

    The Pesticide Program Dialogue Committee, a permanent, broadly representative advisory committee, meets with EPA on a regular basis to discuss pesticide regulatory, policy, and program implementation issues.

  10. 76 FR 29250 - President's Committee for People With Intellectual Disabilities; Notice of Meeting

    Science.gov (United States)

    2011-05-20

    ... Genevieve Swift, PCPID Executive Administrative Assistant, via e-mail at Edith.Swift@acf.hhs.gov , or via... contact Laverdia Taylor Roach, Director, President's Committee for People with Intellectual Disabilities...

  11. Points from the September Committee Meetings

    CERN Multimedia

    2002-01-01

    After a turbulent year, the Committee meetings during the week beginning 16th September took a calmer nature, even if the follow-up of the cost-to-completion review was still a central topic of discussion. The detailed Action Plan and timetable for implementing the recommendations of the External Review Committee were among the principle items. The Plan is based on actions that address specific recommendations, from the redeployment of staff to the LHC to improved financial controls and budgetary tools. It was well received by the Committees and will be presented to the full CERN Council in December. In the meantime, many actions are underway, such as the restructuring of the Accelerator Sector, and the establishment of an external committee to review costs and progress of the LHC on an annual basis. The Finance Committee examined the proposed budget for 2003, which will also be presented to Council for approval in December. In addition, the Committee approved the volume of Industrial Support contracts for 20...

  12. Do committees ru(i)n the bio-political culture? On the democratic legitimacy of bioethics committees.

    Science.gov (United States)

    Friele, Minou Bernadette

    2003-08-01

    Bioethical and bio-political questions are increasingly tackled by committees, councils, and other advisory boards that work on different and often interrelated levels. Research ethics committees work on an institutional or clinical level; local advisory boards deal with biomedical topics on the level of particular political regions; national and international political advisory boards try to answer questions about morally problematic political decisions in medical research and practice. In accordance with the increasing number and importance of committees, the quality of their work and their functional status are being subjected to more and more scrutiny. Besides overall criticism regarding the quality of their work, particular committees giving political advice are often suspected of being incompatible with democratic values, such as respect for affected parties, representation of diverse values and transparency in the decision-making processes. Based on the example of the German National Ethics Council, whose inauguration caused a still ongoing debate on the aims and scopes of committees in general, this paper discusses: (1) the requirements of modern democratic societies in dealing with complex scientific-technical problems; (2) the composition and organisation of committees working as political advisory boards; and (3) the appointment procedures and roles of laymen and experts, and here in particular of ethicists, who may legitimately be taken on by a committee. I will argue that bioethics committees do not necessarily endanger democratic values, but can considerably improve their realisation in democratic decision-making procedures--if, and only if, they do not act as substitutes for parliamentarian processes, but help prepare parliamentarian processes to be organised as rationally as possible.

  13. Effects of thermal treatments on protein adsorption of Co-Cr-Mo ASTM-F75 alloys.

    Science.gov (United States)

    Duncan, L A; Labeed, F H; Abel, M-L; Kamali, A; Watts, J F

    2011-06-01

    Post-manufacturing thermal treatments are commonly employed in the production of hip replacements to reduce shrinkage voids which can occur in cast components. Several studies have investigated the consequences of these treatments upon the alloy microstructure and tribological properties but none have determined if there are any biological ramifications. In this study the adsorption of proteins from foetal bovine serum (FBS) on three Co-Cr-Mo ASTM-F75 alloy samples with different metallurgical histories, has been studied as a function of protein concentration. Adsorption isotherms have been plotted using the surface concentration of nitrogen as a diagnostic of protein uptake as measured by X-ray photoelectron spectroscopy. The data was a good fit to the Langmuir adsorption isotherm up to the concentration at which critical protein saturation occurred. Differences in protein adsorption on each alloy have been observed. This suggests that development of the tissue/implant interface, although similar, may differ between as-cast (AC) and heat treated samples.

  14. Final Report, Volume 2, The Development of Qualification Standards for Cast Duplex Stainless Steel

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Steven, W.; Lundin, Carl, D.

    2005-09-30

    The scope of testing cast Duplex Stainless Steel (DSS) required testing to several ASTM specifications, while formulating and conducting industry round robin tests to verify and study the reproducibility of the results. ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases were implemented. In the ASTM E562 study, 5 samples were extracted from various cast austenitic and DSS in order to have varying amounts of ferrite. Each sample was metallographically prepared by UT and sent to each of 8 participants for volume fraction of ferrite measurements. Volume fraction of ferrite was measured using manual point count per ASTM E562. FN was measured from the Feritescope{reg_sign} and converted to volume fraction of ferrite. Results indicate that ASTM E562 is applicable to DSS and the results have excellent lab-to-lab reproducibility. Also, volume fraction of ferrite conversions from the FN measured by the Feritescope{reg_sign} were similar to volume fraction of ferrite measured per ASTM E562. In the ASTM A923 applicability to cast DSS study, 8 different heat treatments were performed on 3 lots of ASTM A890-4A (CD3MN) castings and 1 lot of 2205 wrought DSS. The heat treatments were selected to produce a wide range of cooling rates and hold times in order to study the suitability of ASTM A923 to the response of varying amounts on intermetallic phases [117]. The test parameters were identical to those used to develop ASTM A923 for wrought DSS. Charpy V-notch impact samples were extracted from the

  15. Final Report, Volume 2, The Development of Qualification Standards for Cast Duplex Stainless Steel

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Steven, W.; Lundin, Carl, W.

    2005-09-30

    The scope of testing cast Duplex Stainless Steel (DSS) required testing to several ASTM specifications, while formulating and conducting industry round robin tests to verify and study the reproducibility of the results. ASTM E562 (Standard Test Method for Determining Volume Fraction by Systematic manual Point Count) and ASTM A923 (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 study of the effectiveness of existing foundry solution annealing procedures for producing cast DSS without intermetallic phases were implemented. In the ASTM E562 study, 5 samples were extracted from various cast austenitic and DSS in order to have varying amounts of ferrite. Each sample was metallographically prepared by UT and sent to each of 8 participants for volume fraction of ferrite measurements. Volume fraction of ferrite was measured using manual point count per ASTM E562. FN was measured from the Feritescope® and converted to volume fraction of ferrite. Results indicate that ASTM E562 is applicable to DSS and the results have excellent lab-to-lab reproducibility. Also, volume fraction of ferrite conversions from the FN measured by the Feritescope® were similar to volume fraction of ferrite measured per ASTM E562. In the ASTM A923 applicability to cast DSS study, 8 different heat treatments were performed on 3 lots of ASTM A890-4A (CD3MN) castings and 1 lot of 2205 wrought DSS. The heat treatments were selected to produce a wide range of cooling rates and hold times in order to study the suitability of ASTM A923 to the response of varying amounts on intermetallic phases [117]. The test parameters were identical to those used to develop ASTM A923 for wrought DSS. Charpy V-notch impact samples were extracted from the castings and wrought

  16. Dosimetry-adjusted reactor physics parameters for pressure vessel neutron exposure assessment

    International Nuclear Information System (INIS)

    McElroy, W.N.; Kellogg, L.S.

    1988-01-01

    The ASTM E706 master matrix standard describes a series of 20 American Society for Testing and Materials (ASTM) standard practices, guides, and methods for use in the prediction of neutron-induced changes in light water reactor (LWR) pressure vessel (PV) and support structure steels throughout a PV's service life. Some of these are existing ASTM standards, some are ASTM standards that have been modified, and some are new ASTM standards. These standards are periodically revised to assume their applicability during the 40-yr (32 effective full-power years) design license period for a nuclear power plant. They are now under review by two new ASTM plant life extension task groups: E10.05.11 on physics dosimetry and E10.02.11 on metallurgy. A brief review on the current application of these standards and a discussion of the status of work to verify the accuracy of derived physics-dosimetry parameter values is presented in this paper

  17. A simplified test procedure for determining the effectiveness of adsorbents for the removal of methyl iodide

    International Nuclear Information System (INIS)

    Underhill, D.W.

    1993-01-01

    ASTM Test Procedure D3803 measures the ability of nuclear-grade carbon to remove methyl iodide from a stream of humidified air. This test, unlike all the other procedures developed by ASTM Committee D28, has evolved to become extremely complex. The intricacy of this test as well as the great difficulty in obtaining inter-laboratory agreement, creates doubt as tot the actual meaning of the results. Here a far simpler test system is described in which thermodynamic principles are used to maintain a constant, reproducible test procedure. This paper describes a system implementing these elements, its cost to build, and the factors affecting its accuracy. 11 refs., 1 fig

  18. 12 CFR 917.7 - Audit committees.

    Science.gov (United States)

    2010-01-01

    ... internal auditor and that the internal auditor may be removed only with the approval of the audit committee; (ii) Provide that the internal auditor shall report directly to the audit committee on substantive matters and that the internal auditor is ultimately accountable to the audit committee and board of...

  19. 78 FR 25442 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Meeting

    Science.gov (United States)

    2013-05-01

    ... Committee will provide advice and recommendations on initiatives to expand access to banking services by... accounts and bank prepaid cards, and an update on mobile financial services and economic inclusion. The....vodium.com/goto/fdic/advisorycommittee.asp . This service is free and available to anyone with the...

  20. 77 FR 52031 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Meeting

    Science.gov (United States)

    2012-08-28

    ... Committee will provide advice and recommendations on initiatives to expand access to banking services by... National Survey of Unbanked and Underbanked Households, an update on the Mobile Financial Services... via the Internet at: http://www.vodium.com/goto/fdic/advisorycommittee.asp . This service is free and...

  1. COMPETITION BEETWEN DYNAMIC RECUPERATION AND RECRYSTALLIZATION OF ASTM F 138 AUSTENITIC STAINLESS STEEL UTILIZED IN MEDICAL DEVICES

    Directory of Open Access Journals (Sweden)

    Fabio Henrique Casarini Geronimo

    2013-06-01

    Full Text Available ASTM F 138 austenitic stainless steel has being used in the manufacture of orthopedical devices by hot forging. In this work, the flow stress curves are determined by hot torsion tests in a wide range of temperatures and strain rates. With the observed microestrutural evolution by optical microscopy in different hot forming conditions in addiction with EBSD (Electron Backscatter Diffraction techniques it is possible to obtained the recrystallized volume fraction and the misorientation angles of the samples. Due to the intermediate level of stacking fault energy of this material, during the dynamic softening occurs a competition between recrystallization and recovery. The aim of this work is to identify the softening mechanisms in this stainless steel, as well as in which hot work conditions they become more active.

  2. 75 FR 5630 - NASA Advisory Council; Space Operations Committee; Meeting

    Science.gov (United States)

    2010-02-03

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-017)] NASA Advisory Council; Space... Committee of the NASA Advisory Council. DATES: Wednesday, February 17, 2010, 9 a.m.-12 p.m. EST. ADDRESSES: NASA Headquarters, 300 E Street, SW., Washington, DC 20456, Room 2U22. FOR FURTHER INFORMATION CONTACT...

  3. 75 FR 39973 - NASA Advisory Council; Commercial Space Committee; Meeting

    Science.gov (United States)

    2010-07-13

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (10-076)] NASA Advisory Council; Commercial... Committee to the NASA Advisory Council. DATES: Thursday, July 29, 2010, 9 a.m.-12 p.m., Eastern. ADDRESSES: NASA Headquarters, 300 E Street, SW., PRC/Room 9H40, Washington, DC 20546. FOR FURTHER INFORMATION...

  4. 76 FR 3674 - NASA Advisory Council; Commercial Space Committee; Meeting

    Science.gov (United States)

    2011-01-20

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (11-006)] NASA Advisory Council; Commercial... Committee to the NASA Advisory Council. DATES: Tuesday, February 8, 2011, 2 p.m.-3:30 p.m., Local Time. ADDRESSES: NASA Headquarters, 300 E Street, SW., Glennan Conference Center, Room 1Q39, Washington, DC 20546...

  5. Comparing Safari Tech Books Online and Books24x7 E-Book Collections: A Case Study from the University of British Columbia Library

    Science.gov (United States)

    Barsky, Eugene; Schattman, Lisa; Greenwood, Aleteia

    2009-01-01

    Most academic libraries are seeking to provide electronic access to the very dynamic and changing field of technology related material. "Safari Tech Books Online" and "Books24x7" are the major e-book collections in this area. We compared the "Safari Tech Books Online" and "Books24x7" e-book packages as to…

  6. 29 CFR 511.7 - Committee staff.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Committee staff. 511.7 Section 511.7 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS WAGE ORDER PROCEDURE FOR AMERICAN SAMOA § 511.7 Committee staff. Each industry committee will be furnished a lawyer, to...

  7. 77 FR 21773 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Meeting

    Science.gov (United States)

    2012-04-11

    ... Committee will provide advice and recommendations on initiatives to expand access to banking services by... pilot, prepaid cards and mobile financial services. The agenda may be subject to change. Any changes to... . This service is free and available to anyone with the following systems requirements: http://www.vodium...

  8. 77 FR 71001 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Meeting

    Science.gov (United States)

    2012-11-28

    ... Committee will provide advice and recommendations on initiatives to expand access to banking services by... and initiatives, and an update on mobile financial services. The agenda may be subject to change. Any... . This service is free and available to anyone with the following systems requirements: http://www.vodium...

  9. Coating and Interface Degradation of Coated steel, Part 2: Accelerated Laboratory Tests

    International Nuclear Information System (INIS)

    Cambier, S.M.; Frankel, G.S.

    2014-01-01

    In a previous paper, it was demonstrated that the measurement of cathodic delamination by the Scanning Kelvin Probe can assess the interface stability of poly(vinyl butyral) (PVB) coated steel after field exposure. This technique was utilized to characterize the degradation of the polymer/metal interface in several outdoor climates. In this paper, the effects of environmental factors on the interface degradation were investigated in the laboratory. The mechanisms measured in the field were reproduced to provide input in the development of an appropriate accelerated test for PVB coated steel. The ASTM B117 and G154 standardized tests were investigated individually and sequentially. The interface stability improved after 24 h of ASTM G154 exposure. After 144 h of exposure to ASTM G154 exposure, polymer oxidation took place simultaneously with interface degradation. The condensation phase of the ASTM G154 test was responsible for the interface improvement while the ultraviolet radiation triggered the interface degradation. Pre-exposure to ASTM G154 delayed wet de-adhesion during ASTM B117 exposure. After wet de-adhesion caused by 6 h of ASTM B117, exposure to ASTM G154 for 24 h increased the interface stability. The effects of ultraviolet radiation, relative humidity, temperature and environment on interface degradation were investigated in a special chamber. Humidity was the primary factor found to influence the interface improvement during G154 exposure. A wet/dry salt fog cycle with irradiation by an ultraviolet or filtered xenon arc lamp around room temperature was suggested to reproduce the competition between the interface improvement and the interface degradation that takes place in the field

  10. 75 FR 55314 - Advisory Committee on Student Financial Assistance: Meeting

    Science.gov (United States)

    2010-09-10

    ... later than Monday, September 20, 2010 by contacting Ms. Tracy Jones at (202) 219- 2099 or via e-mail at..., 80 F Street, NW., Suite 413, Washington, DC 20202-7582, (202) 219-2099. SUPPLEMENTARY INFORMATION.... You may also contact the Advisory Committee staff directly at (202) 219-2099. The registration...

  11. Plasma Science Committee (PLSC)

    International Nuclear Information System (INIS)

    1990-01-01

    The Plasma Science Committee (PLSC) is a standing committee under the auspices of the Board on Physics and Astronomy, Commission on Physical Sciences, Mathematics, and Applications of the National Academy of Sciences--National Research Council. Plasma sciences represent a broad and diverse field. The PLSC has accepted the responsibility of monitoring the continuing development and assessing the general health of the field as whole. Although select advisory bodies have been created to address specific issues that affect plasma science, such as the Fusion Policy Advisory Committee (FPAC), the PLSC provides a focus for the plasma science community that is unique and essential. The membership of the PLSC is drawn from research laboratories in universities, industry, and government. Areas of expertise on the committee include accelerators and beams, space physics, astrophysics, computational physics and applied mathematics, fusion plasmas, fundamental experiments and theory, radiation sources, low temperature plasmas, and plasma-surface interactions. The PLSC is well prepared to respond to requests for studies on specific issues. This report discusses ion of the PLSC work

  12. 76 FR 29722 - Elko Resource Advisory Committee

    Science.gov (United States)

    2011-05-23

    ... (Pub. L. 110-343) (the Act) and operates in compliance with the Federal Advisory Committee Act. The...- Determination Act; (2) Review roles of RAC committee members and Committee Chairman; (3) Overview of project...

  13. Mechanical characterization of Al-2024 reinforced with fly ash and E-glass by stir casting method

    Science.gov (United States)

    Ramesh, B. T.; Swamy, R. P.; Vinayak, Koppad

    2018-04-01

    The properties of MMCs enhance their handling in automotive and various applications for the reason that of encouraging properties of high stiffness and high strength, low density, high electrical and thermal conductivity, corrosion resistance, improved wear resistance etc. Metal Matrix Composites are a vital family of materials designed at achieving an improved combination of properties. Our paper deals through to fabricate Hybrid Composite by heating Al 2024 in furnace at a temperature of around 4000 C. E-Glass fiber & Fly ash will be added to the molten metal with changing weight fractions and stirred strongly. Then the ensuing composition will poured into the mould to obtain hybrid composite casting. Aluminium alloy (2024) is the matrix metal used in the present investigation. Fly ash and e-glass are used as the reinforced materials to produce the composite by stir casting. Fly ash is selected because of it is less expensive and low density reinforcement available in great quantities as solid disposal from thermal power plants. The Test specimen is prepared as per ASTM standards size by machining operations to conduct Tensile, Compression, Hardness, and wear test. The test specimens are furnished for tensile, compression strength and wear as per ASTM standard E8, E9 and G99 respectively using Universal Testing Machine and pin on disk machine. It is seen that the fabricated MMC obtained has got enhanced mechanical strength.

  14. 76 FR 18144 - Committees on Administration & Management, Collaborative Governance, and Judicial Review

    Science.gov (United States)

    2011-04-01

    ... accommodations for persons with disabilities), and how to submit comments to the committee can be found in the ``Research'' section of the ACUS Web site, at http://www.acus.gov . Comments may be submitted by e-mail to...

  15. The committee of scientific expertise coordination

    International Nuclear Information System (INIS)

    2003-01-01

    Placed under the MIES control, the Committee of scientific expertise coordination defines the needs, the contain and the planing of expertises realized in function of Climate national and international decisions and negotiations calendars. The Committee verifies the different expertises and offers the administrations, scientific tools and techniques useful for the negotiations. It can also define long-dated research needs which require the scientific community mobilization. This paper provides some document of the Committee: objectives, operating and priorities of the Committee, scenarios ''Factor 4'' and ''crack technology'', perceptions and practices, developing countries (China, India...), Euromed. (A.L.B.)

  16. Synthesis, Characterization and Biological Activities of Novel (E)-3-(1-(Alkyloxyamino)ethylidene)-1-alkylpyrrolidine-2,4-dione Derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Zhao Yong; Shi, Qing Ming; Han, Bao Feng; Wang, Xian Feng; Qiang, Sheng; Yang, Chun Long [Nanjing Agricultural University, Nanjing (China)

    2010-09-15

    Twenty novel tetramic acid derivatives (E)-3-(1-(alkyloxyamino)ethylidene)-1-alkylpyrrolidine-2,4-diones were synthesized by the reaction of 3-(1-hydroxyethylidene)pyrrolidine-2,4-diones with O-alkyl hydroxylamines. The title compounds were confirmed by IR, {sup 1}H NMR, MS and elemental analysis. The structure of compound 6r was further verified by X-ray diffraction crystallography. The bioassays showed that most of the title compounds exhibited noticeable herbicidal and fungicidal activities.

  17. Computer program for obtaining thermodynamic and transport properties of air and products of combustion of ASTM-A-1 fuel and air

    Science.gov (United States)

    Hippensteele, S. A.; Colladay, R. S.

    1978-01-01

    A computer program for determining desired thermodynamic and transport property values by means of a three-dimensional (pressure, fuel-air ratio, and either enthalpy or temperature) interpolation routine was developed. The program calculates temperature (or enthalpy), molecular weight, viscosity, specific heat at constant pressure, thermal conductivity, isentropic exponent (equal to the specific heat ratio at conditions where gases do not react), Prandtl number, and entropy for air and a combustion gas mixture of ASTM-A-1 fuel and air over fuel-air ratios from zero to stoichiometric, pressures from 1 to 40 atm, and temperatures from 250 to 2800 K.

  18. Evaluation of the work of hospital districts' research ethics committees in Finland.

    Science.gov (United States)

    Halila, Ritva

    2014-12-01

    The main task of research ethics committees (RECs) is to assess research studies before their start. In this study, 24 RECs that evaluate medical research were sent questionnaires about their structure and functions. The RECs were divided into two separate groups: those working in university hospital districts (uRECs) and those in central hospital districts (non-uRECs). The two groups were different in many respects: the uRECs were bigger in size, covered a wider range of disciplines (both medical and non-medical), had better resources and more frequent and regular meetings. After the survey was performed and analysed, the Medical Research Act was amended so that only hospital districts with a medical faculty in their region had a duty to establish ethics committees. After the amendment, the number of RECs evaluating medical research in Finland decreased from 25 to 9. The ethics committees that remained had wider expertise and were better equipped already by the time of this survey. Only one non-uREC was continuing its work, and this was being done under the governance of a university hospital district. Simple measures were used for qualitative analysis of the work of RECs that evaluate medical research. These showed differences between RECs. This may be helpful in establishing an ethics committee network in a research field or administrational area. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  19. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    Ordinary meeting on 30 January 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement measure...

  20. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    ORDINARY MEETING ON 30 JANUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The Committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement mea...

  1. 76 FR 52943 - Advisory Committee on Student Financial Assistance: Meeting

    Science.gov (United States)

    2011-08-24

    ... later than Monday, September 5, 2011 by contacting Ms. Tracy Jones at (202) 219- 2099 or via e-mail at..., Washington DC 20202-7582, (202) 219-2099. Individuals who use a telecommunications device for the deaf (TTY...-3032. You may also contact the Advisory Committee staff directly at (202) 219-2099. The registration...

  2. 75 FR 10551 - Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues

    Science.gov (United States)

    2010-03-08

    ..., Telephone (202) 267-3168, Fax (202) 267-5075, or e-mail at [email protected] . SUPPLEMENTARY INFORMATION... participating by telephone, PLEASE CONTACT Ralen Gao by e-mail or phone for the teleconference call-in number... Committee Meeting on Transport Airplane and Engine Issues AGENCY: Federal Aviation Administration (FAA), DOT...

  3. 76 FR 60115 - Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues

    Science.gov (United States)

    2011-09-28

    ... (202) 267-5075, or e-mail at [email protected] . SUPPLEMENTARY INFORMATION: Pursuant to Section 10(a)(2... by October 12, 2011. For persons participating by telephone, please contact Ralen Gao by e-mail or... Committee Meeting on Transport Airplane and Engine Issues AGENCY: Federal Aviation Administration (FAA), DOT...

  4. Interlaboratory Study (ILS) for F 548-01, The Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

    National Research Council Canada - National Science Library

    Pinkus, Alan

    2003-01-01

    ...) as outlined in ASTM E 691. This report, which conforms to the ILS reporting format required by ASTM, describes the study that was conducted for ASTM test standard F 548-01, Intensity of Scratches on Aerospace Transparent Plastics...

  5. 50 CFR 453.04 - Committee information gathering.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.04 Committee information gathering. (a) Written submissions... Section 453.04 Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE...

  6. 78 FR 29135 - HIT Standards Committee Advisory Meeting

    Science.gov (United States)

    2013-05-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting AGENCY: Office of...: HIT Standards Committee. General Function of the Committee: To provide recommendations to the National... Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT Policy Committee...

  7. Factors influencing the effectiveness of research ethics committees.

    Science.gov (United States)

    Schuppli, C A; Fraser, D

    2007-05-01

    Research ethics committees - animal ethics committees (AECs) for animal-based research and institutional research boards (IRBs) for human subjects - have a key role in research governance, but there has been little study of the factors influencing their effectiveness. The objectives of this study were to examine how the effectiveness of a research ethics committee is influenced by committee composition and dynamics, recruitment of members, workload, participation level and member turnover. As a model, 28 members of AECs at four universities in western Canada were interviewed. Committees were selected to represent variation in the number and type of protocols reviewed, and participants were selected to include different types of committee members. We found that a bias towards institutional or scientific interests may result from (1) a preponderance of institutional and scientist members, (2) an intimidating atmosphere for community members and other minority members, (3) recruitment of community members who are affiliated with the institution and (4) members joining for reasons other than to fulfil the committee mandate. Thoroughness of protocol review may be influenced by heavy workloads, type of review process and lack of full committee participation. These results, together with results from the literature on research ethics committees, suggested potential ways to improve the effectiveness of research ethics committees.

  8. 50 CFR 453.06 - Additional Committee powers.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information. Subject... Section 453.06 Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE...

  9. Elections to the Senior Staff Advisory Committee (‘The Nine’) 2008

    CERN Multimedia

    HR Department

    2008-01-01

    The electronic voting process for the Senior Staff Advisory Committee (‘The Nine’) was closed on Monday 2nd June. Of the 444 Senior Staff members called to vote, 228 voted. The results are: Electoral Group 1 Name\tDepartment\tVotes Patrick Janot\tPH\t52 Marcello Mannelli\tPH\t26 Pippa Wells\tPH\t100 Electoral Group 2 Name\tDepartment\tVotes Austin Ball\tPH\t75 Doris Forkel-Wirth\tSC\t110 Paul Lecoq\tPH\t23 Pippa Wells is therefore elected in Group 1, and Doris Forkel-Wirth in Group 2. Their mandate is from July 2008 to June 2011. The committee now consists of these newly-elected members together with P. Collier AB, R. Landua DSU, R. Martens IT, A. Pace IT, E. Tsesmelis TS, A. Unnervik FI and E. Wildner AT. Sue Foffano – Polling Officer.

  10. 75 FR 81606 - FDIC Advisory Committee on Economic Inclusion (ComE-IN); Notice of Charter Renewal

    Science.gov (United States)

    2010-12-28

    ... focused on expanding access to banking services by underserved populations. The Committee will continue to provide advice and recommendations on initiatives to expand access to banking services by underserved... Services Administration, the Chairman of the Federal Deposit Insurance Corporation has determined that...

  11. Standard Guide for Testing Polymer Matrix Composite Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but non-standard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (MIL-HDBK-17). Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall appl...

  12. BAP, 2,4-D e ácido acetilsalicílico na indução e diferenciação de calos em anteras de Coffea arabica L BAP, 2,4-D and acetyl-salicylic acid on the callus induction and differentiation in Coffea arabica L. anthers

    Directory of Open Access Journals (Sweden)

    Adelaide Siqueira Silva

    2009-10-01

    Full Text Available O melhoramento genético do cafeeiro por meio de métodos convencionais é um processo demorado para se obter uma nova cultivar. A redução desse tempo é possível através da produção de linhagens homozigóticas, oriundas de dihaplóides obtidas através da cultura de anteras. Objetivou-se aplicar a técnica da cultura de anteras em diferentes cvs. de Coffea arabica L. para induzir a formação de calos e regenerar plântulas di-haplóides, com uso de reguladores vegetais. Os experimentos foram conduzidos no laboratório de Biotecnologia Vegetal da Universidade Federal de Uberlândia (UFU. Anteras das cultivares Mundo Novo LCP-379-19 e Catuaí Vermelho H2077-2-5-44 foram inoculadas em meio MS suplementado com 2,0 mg L-1 de 2,4-D e AAS, nas concentrações de 0; 8; 16; 32 e 64 mg L-1. Calos de 'Catuaí Vermelho 44' foram subcultivados em meio MS acrescido de diferentes concentrações de BAP (0; 2; 4 e 8 mg L-1 e 2,4-D (0; 1; 2 e 4 mg L-1. Tanto para as cvs. Mundo Novo quanto para Catuaí Vermelho 44 o aumento das concentrações de AAS diminuiu a formação de próembrióides nos calos e somente o 2,4-D foi capaz de promover a formação de calos friáveis, porém o equilíbrio da auxina e da citocinina utilizadas no trabalho, favoreceram a produção de calos friáveis.Coffee plant breeding through conventional methods demands a long time to obtain new cultivars. The reduction of this period is possible through the production of homozygous lines, from dihaploids obtained via anther culture. The aim of this study was to apply the anther culture technique on different C. arabica L. cultivars to induce calli formation and to regenerate dihaploid seedlings with the use of plant growth regulators. The experiments were accomplished in the Plant Biotechnology laboratory at Uberlândia Federal University (UFU. Anthers of the cultivars Mundo Novo LCP-379-19 and Catuaí Vermelho H2077-2-5-44 were inoculated on MS medium supplemented with 2.0 mg L-1

  13. Activities of the O&M committee history & future perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Poulis, D.S.

    1996-12-01

    This paper gives an overview of the Committee on Operation and Maintenance of Nuclear Power Plants, hereafter referred to as the O&M Committee, formed in June 1975 when the American National Standard Institute`s Committee on Reactor Plants and their Maintenance was disbanded. The O&M Committee`s history, structure, current focus and future perspectives will be presented. The purpose of this paper is to give information to industry and the public of the Committee`s on-going effort to make accurate and timely responses to the needs of the nuclear industry.

  14. 75 FR 29739 - Advisory Committee on Student Financial Assistance: Hearing

    Science.gov (United States)

    2010-05-27

    ..., Capitol Place, 80 F Street, NW., Suite 413, Washington, DC 20202-7582, (202) 219-2099. Individuals who use... (202) 219-2099 or via e-mail at [email protected] . We will attempt to meet requests after this... at (202) 219-3032. You may also contact the Advisory Committee staff directly at (202) 219-2099. The...

  15. 76 FR 44317 - Advisory Committee on Student Financial Assistance: Meeting

    Science.gov (United States)

    2011-07-25

    ... later than Monday, August 1, 2011 by contacting Ms. Tracy Jones at (202) 219-2099 or via e-mail at tracy..., 80 F Street, NW., Suite 413, Washington DC 20202-7582, (202) 219-2099. Individuals who use a...-3032. You may also contact the Advisory Committee staff directly at (202) 219-2099. The registration...

  16. Kinetic and morphological differentiation of ettringites in plain and blended Portland cements with metakaolin and the ASTM C 452-68 test. Part II: Morphological differentiation by SEM and XRD analysis

    Directory of Open Access Journals (Sweden)

    Talero, R.

    2009-03-01

    Full Text Available The same cementitious materials (OPCs, SRPCs and matekaolin, MK, the same blended cements and the same ASTM C 452-68 test than in Part I, were used. Other complementary determinations were: chemical analysis of cementing materials, SEM and XRD analysis of ettringites and specific properties of some cement tested and of their pastes.The experimental results have also demonstrated that when 7.0% SO3, equivalent to 15.05% of gypsum, was added to the M pozzolan-containing Portland cement and tested with the ASTM C 452-68 method, it was not found to behave aggressively but rather as “setting regulator ”, because the increase in mechanical strengths over time and setting times in these mixes were, therefore, similar to the pattern observed in any PC. However, when the gypsum content was raised to triple than that amount (21.0% SO3, it behaved aggressively. In both cases, logically, ettringite from both origins were involved in the resulting beneficial or adverse behavior.En esta Parte II se utilizaron los mismos materiales cementíceos (CPO, CPRS, y metakaolín, MK, los mismos cementos de mezcla y el mismo método de ensayo ASTM C 452-68 que en la Parte I. Otras determinaciones complementarias fueron: análisis químico de los materiales cementíceos, análisis por DRX y SEM de ettringitas y propiedades específicas de algunos cementos ensayados y de sus pastas.Los resultados experimentales obtenidos han demostrado también que, el 7.0% de SO3 presente en los 30 cementos de mezcla con MK, ensayados conforme el método ASTM C 452-68, no se comporta como agresivo sino como ”regulador de fraguado”, porque los tiempos de fraguado y el aumento de resistencias mecánicas fueron como los de cualquier CP. De aquí que algunos de esos cementos de mezcla puedan ser considerados “cementos hidráulicos expansivos”, el resto, no. Sin embargo, cuando la cantidad de yeso aportada fue el triple (21,0% SO3, se comportó como agresivo, motivo por el cual

  17. Audit Committee Attributes and Earnings Management: Evidence from Nigeria

    Directory of Open Access Journals (Sweden)

    Afensimi Elijah

    2015-05-01

    Full Text Available Using the agency theoretical framework, the  study postulates that audit committee attributes can impact significantly, constraining accrual-based distortion of financial reporting credibility and thus improve the quality of financial reporting. To assess our arguments, audit committee size, audit committee financial literacy, audit committee attendance at meetings, audit committee independence and audit meetings frequency of meeting were regressed on financial reporting quality measured by discretionary accruals. The findings for the full sample and negative discretionary accruals sample confirm our expectation that audit committee characteristics have a constraining effect on earnings management. Specifically, audit committee financial expertise, audit committee size, audit committee independence and diligence showed an inverse and significant relationship with earnings management. This is in tandem with theoretical expectations and suggest that increases in these variables we exert a declining influence on earnings management. The study concludes that there is the need for companies to focus on attributes that strengthen the effectiveness of their audit committees.

  18. 50 CFR 451.03 - Endangered Species Committee.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Endangered Species Committee. 451.03... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS APPLICATION PROCEDURE § 451.03 Endangered Species Committee. (a) Scope. This section contains...

  19. Effects of Spray Mixtures on Droplet Size Under Aerial Application Conditions and Implications on Drift

    Science.gov (United States)

    2010-01-01

    Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light‐Scattering Instruments (ASTM Standards, 2003). The most common term used to...using optical nonimaging light‐scattering instruments. West Conshohocken, Pa.: ASTM Intl. ASTM Standards. 2004. E 1620. Standard terminology relating

  20. 76 FR 64122 - NASA Advisory Committee; Renewal of NASA's International Space Station Advisory Committee Charter

    Science.gov (United States)

    2011-10-17

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-095)] NASA Advisory Committee; Renewal of NASA's International Space Station Advisory Committee Charter AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of renewal and amendment of the Charter of the International...

  1. 75 FR 24584 - Request for Nominations for the Industry Trade Advisory Committees (ITACs)

    Science.gov (United States)

    2010-05-05

    ... of industry perspectives is represented. Other trade policy issues, e.g., government procurement... DEPARTMENT OF COMMERCE International Trade Administration Request for Nominations for the Industry Trade Advisory Committees (ITACs) AGENCY: International Trade Administration, Manufacturing and Services...

  2. Kinetic and morphological differentiation of Ettringites in plain and blended Portland cements using Metakaolin and the ASTM C 452-68 test. Part I: kinetic differentiation

    Directory of Open Access Journals (Sweden)

    Talero, R.

    2008-12-01

    Full Text Available In this first part of the study, the results obtained in prior research with XRD and SEM, as well as the Le Chatelier-Ansttet test were confirmed with the ASTM C 452-68 test. To this end, 20%, 30% and 40% metakaolin (MK was added to ten Portland cements, six OPCs and four SRPCs. Both the ten plain PCs and the 30 metakaolin (MK blends were tested for two years under ASTM C 452-68 specifications, determining not only the percentage increase in length, ΔL(%, of the specimens, but also the sulphate content in the curing water. Other parameters studied included: chemical analysis of the cementitious materials used and specific properties of some of the cements tested.The experimental results, ΔL(% versus time, re-confirmed that the formation rate of ettringite from the reactive alumina, Al2O3r-, present in the pozzolan must be substantially higher than the formation rate of ettringite from the C3A present in the PC. This was verified by the variation of the sulphate content in the specimen curing water throughout the test. In light of those findings, in this article these two types of ettringite are denominated rapid forming ettringite or ett-rf, and slow forming ettringite or ett-lf.En esta Parte I de la investigación, se han logrado verificar mediante el ensayo ASTM C 452-68, los resultados obtenidos en anteriores investigaciones realizadas con DRX y SEM y el ensayo Le Chatelier-Ansttet. Para ello, a 10 cementos Portland –6 CPO y 4 CPRS– se les añadió 20%, 30% y 40% de metakaolín (MK. Tanto los 10 CP como los 30 de sus mezclas con metakaolín (MK, se ensayaron durante 2 años, mediante dicho método ASTM C 452-68, y a sus probetas no sólo se les determinó su incremento porcentual de longitud, ΔL(%, sino además, el contenido de sulfatos de sus aguas de conservación. Otras determinaciones complementarias fueron: análisis químico de los materiales cementiceos utilizados y propiedades específicas de algunos cementos ensayados

  3. Advisory Committee on human radiation experiments. Supplemental Volume 2a, Sources and documentation appendices. Final report

    International Nuclear Information System (INIS)

    1995-01-01

    This large document provides a catalog of the location of large numbers of reports pertaining to the charge of the Presidential Advisory Committee on Human Radiation Research and is arranged as a series of appendices. Titles of the appendices are Appendix A- Records at the Washington National Records Center Reviewed in Whole or Part by DoD Personnel or Advisory Committee Staff; Appendix B- Brief Descriptions of Records Accessions in the Advisory Committee on Human Radiation Experiments (ACHRE) Research Document Collection; Appendix C- Bibliography of Secondary Sources Used by ACHRE; Appendix D- Brief Descriptions of Human Radiation Experiments Identified by ACHRE, and Indexes; Appendix E- Documents Cited in the ACHRE Final Report and other Separately Described Materials from the ACHRE Document Collection; Appendix F- Schedule of Advisory Committee Meetings and Meeting Documentation; and Appendix G- Technology Note

  4. Advisory Committee on human radiation experiments. Supplemental Volume 2a, Sources and documentation appendices. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This large document provides a catalog of the location of large numbers of reports pertaining to the charge of the Presidential Advisory Committee on Human Radiation Research and is arranged as a series of appendices. Titles of the appendices are Appendix A- Records at the Washington National Records Center Reviewed in Whole or Part by DoD Personnel or Advisory Committee Staff; Appendix B- Brief Descriptions of Records Accessions in the Advisory Committee on Human Radiation Experiments (ACHRE) Research Document Collection; Appendix C- Bibliography of Secondary Sources Used by ACHRE; Appendix D- Brief Descriptions of Human Radiation Experiments Identified by ACHRE, and Indexes; Appendix E- Documents Cited in the ACHRE Final Report and other Separately Described Materials from the ACHRE Document Collection; Appendix F- Schedule of Advisory Committee Meetings and Meeting Documentation; and Appendix G- Technology Note.

  5. Standardized Cost Structure for the Environmental Industry

    International Nuclear Information System (INIS)

    Skokan, B.; Melamed, D.; Guevara, K.; Mallick, P.; Bierman, G.; Marshall, H.E.

    2006-01-01

    The underlying key to developing successful estimates, tracking project costs, and utilizing historical project cost information is the development of standardized and well-defined hierarchical listing of cost categories. Committees within the U.S. Federal agencies have pioneered efforts toward developing the Environmental Cost Element Structure (ECES), which is key in achieving these goals. The ECES was developed using an iterative process with input from federal agencies and industry. Experts from several disciplines participated including engineers, cost estimators, project/program managers, and contract personnel. The ECES benefits from an intense analytical effort, the knowledge gained from the maturation of the environmental industry, and incorporation of past user's experiences. Building upon this foundation, the E06 committee of the ASTM International has now fully developed and published a standard (ASTM 2150-04) that provides standardized cost categories with complete cost category definitions. This standard affords environmental and nuclear D and D project managers the opportunity to have a well defined hierarchical listing of their estimates and actual costs, readily adapted to performing summations and roll-ups, supported by a multi-level dictionary specifically defining the content of the cost elements as well as the summations. Owing to the dynamic nature of the environmental technologies, efforts need to be made to continue to update this standard by adding new technologies and methods as they are developed and employed in the field. Lastly, the Environmental Cost Element Structure that is embodied in this standard also presents opportunities to develop historical cost databases and comprehensive life cycle cost estimates and standardized cost estimating tools. (authors)

  6. Wind pressure testing of tornado safe room components made from wood

    Science.gov (United States)

    Robert Falk; Deepak Shrestha

    2016-01-01

    To evaluate the ability of a wood tornado safe room to resist wind pressures produced by a tornado, two safe room com-ponents were tested for wind pressure strength. A tornado safe room ceiling panel and door were static-pressure-tested according to ASTM E 330 using a vacuum test system. Re-sults indicate that the panels had load capacities from 2.4 to 3.5 times that...

  7. 75 FR 9886 - Methane Hydrate Advisory Committee

    Science.gov (United States)

    2010-03-04

    ... DEPARTMENT OF ENERGY Methane Hydrate Advisory Committee AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the Methane... the Committee: The purpose of the Methane Hydrate Advisory Committee is to provide advice on potential...

  8. Effects of heat treatment to the sound velocity and microstructural changes of ASTM A516 steels

    International Nuclear Information System (INIS)

    Norasiah Abdul Kasim; Azali Muhammad; Amry Amin Abas; Zaiton Selamat

    2010-01-01

    Full-text: The used of ultrasonic testing as a thickness measurement for structural components (pipeline and pressure vessel) is among the popular inspection tool widely use in the industrial power plant such as at petrochemical and nuclear power plant. Currently, there are cases where the thickness grows and the result will affect the reliability of the test. There are many factors that can affect the reliability of measurement. One of it is the material under test itself. In the Malaysian Nuclear Agency, initial efforts are underway to study the understanding on the effects of heat treatment to the sound velocity and microstructure changes of ASTM A516 steel. Few samples of thin square shaped prepared were heat treated under the following conditions: austenitization at 9800 degree Celsius - 2 hours, quenching; tempering at various temperature 4000, 5000, 6000 and 7000 degree Celsius. The results show that the microstructure changes and samples exhibit different sound velocity at different heat treatment. (author)

  9. Report of the evaluation by the Ad Hoc Review Committee on advance science research. Result evaluation, interim evaluation, in-advance evaluation in fiscal year 2003

    International Nuclear Information System (INIS)

    2003-11-01

    The Research Evaluation Committee, which consisted of 13 members from outside of the Japan Atomic Energy Research Institute (JAERI), set up an Ad Hoc Review Committee on Advanced Science Research in accordance with the Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations in order to evaluate the accomplishments of the research completed in Fiscal Year 2002, the accomplishments of the research started in Fiscal Year 2001, and the adequacy of the programs of the research to be started in Fiscal Year 2004 at Advanced Science Research Center of JAERI. The Ad Hoc Review Committee consisted of nine specialists from outside of JAERI. The Ad Hoc Review Committee conducted its activities from May to July 2003. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Ad Hoc Review Committee meeting which was held on June 24, 2003, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Ad Hoc Review Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on August 4, 2003. This report describes the result of the evaluation by the Ad Hoc Review Committee on Advanced Science Research. (author)

  10. 7 CFR 929.125 - Committee review procedures.

    Science.gov (United States)

    2010-01-01

    ... MASSACHUSETTS, RHODE ISLAND, CONNECTICUT, NEW JERSEY, WISCONSIN, MICHIGAN, MINNESOTA, OREGON, WASHINGTON, AND LONG ISLAND IN THE STATE OF NEW YORK Rules and Regulations § 929.125 Committee review procedures... Committee within 30 days after receipt of the Committee's determination of sales history, a request for a...

  11. An analysis of audit committee effectiveness at the largest listed companies in South Africa from a CFO and audit committee perspective

    Directory of Open Access Journals (Sweden)

    Ben Marx

    2009-12-01

    Full Text Available Purpose: The purpose of the study is to investigate and analyse the effective functioning of audit committees at the largest listed companies in South Africa. Problem investigated: The modern audit committee is often seen as the panacea of the corporate world and as such is looked upon to cure all the financial reporting and control-related problems of entities. Audit committees are, however, not always as effective as they are held to be, as is evidenced by the many well-known corporate scandals and business failures that occurred where audit committees existed and fraudulent financial reporting, audit failures, internal control breakdowns and other irregularities prevailed. The modern audit committee will be of value only if it is properly constituted, is functioning effectively and if its role is clearly understood by all the parties concerned. The research problem investigated stems precisely from this issue, and the paper therefore aims to analyse the effective functioning of the audit committees at the largest listed companies in South Africa. Methodology: The study empirically tested the audit committee practices at the largest listed companies in South Africa. This was done through questionnaires addressed to the CFOs and audit committee chairs. Findings: The study found that audit committees at the largest listed companies in South Africa are well established, properly constituted, have the authority and resources to effectively discharge their responsibilities and consist of members who act independently and who have the right mix of appropriate experience, financial literacy and financial expertise amongst their members. The audit committee's role was found to be generally well understood and supported by the board and the Chief Financial Officers. It was further found that the audit committees are effective in discharging their oversight responsibilities on the board's behalf, with the only real exception being their effectiveness

  12. Human research ethics committees: examining their roles and practices.

    Science.gov (United States)

    Guillemin, Marilys; Gillam, Lynn; Rosenthal, Doreen; Bolitho, Annie

    2012-07-01

    Considerable time and resources are invested in the ethics review process. We present qualitative data on how human research ethics committee members and health researchers perceive the role and function of the committee. The findings are based on interviews with 34 Australian ethics committee members and 54 health researchers. Although all participants agreed that the primary role of the ethics committee was to protect participants, there was disagreement regarding the additional roles undertaken by committees. Of particular concern were the perceptions from some ethics committee members and researchers that ethics committees were working to protect the institution's interests, as well as being overprotective toward research participants. This has the potential to lead to poor relations and mistrust between ethics committees and researchers.

  13. Collection Efficiencies of Various Airborne Spray Flux Samplers Used in Aerial Application Research

    Science.gov (United States)

    2008-01-01

    provided by ASTM Standard E1260: Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light...Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments,” Annual Book of ASTM Stan- dards, ASTM International, West

  14. Apolo-Prometeu e Dioniso: dois perfis mitológicos do "homem das 24 horas" de Gaston Bachelard Apollo-Prometheus and Dionysus: two mythological profiles of Gaston Bachelard's "24-hour man"

    Directory of Open Access Journals (Sweden)

    Alexander de Freitas

    2006-04-01

    Full Text Available Gaston Bachelard (1884-1962, um filósofo como ele se auto-denomina de "dupla natureza", pensador de campos do conhecimento tão díspares como a epistemologia da ciência e a metafísica da imaginação poética, reclama uma leitura da dualidade e da complexidade da sua vida e obra. Desse modo, o objetivo deste artigo é investigar a relação dialógica entre a epistemologia da ciência e a metafísica da imaginação poética, dois delineamentos opostos, concorrentes e complementares da filosofia de Bachelard, freqüentemente expressos pelos epítetos "diurno" e "noturno". Para estudarmos a relação entre essas duas vertentes do pensamento de Bachelard, partimos da análise da ambivalência dos seguintes pares de conceitos: obstáculo epistemológico & imaginação material e psicanálise do conhecimento & método fenomenológico, que estruturam, teoricamente no primeiro par e, metodologicamente no segundo, sua epistemologia da ciência e sua metafísica da imaginação poética. Os dados obtidos permitem concluir que a sutura entre a epistemologia científica e a metafísica poética de Bachelard está representada em seu conceito de "homem das 24 horas". Esse homem complexo, andrógino, leitor e pensador das idéias científicas e da gênese poética, parece ser uma imagem conciliadora das antinomias expressas nas faces diurna e noturna da filosofia bachelardiana. Ampliando a análise imagética do "homem das 24 horas", por meio de uma hermenêutica mitanalítica, encontramos as duas faces da filosofia de Bachelard configuradas, respectivamente, pelos mitos de Apolo-Prometeu e Dioniso.Gaston Bachelard (1884-1962, a philosopher who declared himself to be of a "double nature", a thinker in fields of knowledge as diverse as the epistemology of science and the metaphysics of poetic imagination, demands a reading of the duality and complexity of his life and work. The purpose of this article is therefore to investigate the dialogical

  15. 75 FR 52732 - Renewal of Department of Defense Federal Advisory Committee; Missile Defense Advisory Committee

    Science.gov (United States)

    2010-08-27

    ... Committee; Missile Defense Advisory Committee AGENCY: Department of Defense (DoD). ACTION: Renewal of..., the Department of Defense gives notice that it is renewing the charter for the Missile Defense... Director, Missile Defense Agency, independent advice and recommendations on all matters relating to missile...

  16. 76 FR 64892 - Agricultural Policy Advisory Committee and the Agricultural Technical Advisory Committees for...

    Science.gov (United States)

    2011-10-19

    ... balance on each committee will also be sought. Nominations: Nominating a person to serve on any of the... indicating the specific committee for which the individual is being nominated, why the nominee wants to be a... and will not adversely affect his or her ability to serve as an advisor on the U.S. agriculture...

  17. Commentary on factors affecting transverse vibration using an idealized theoretical equation

    Science.gov (United States)

    Joseph F. Murphy

    2000-01-01

    An idealized theoretical equation to calculate flexural stiffness using transverse vibration of a simply end-supported beam is being considered by the American Society of Testing and Materials (ASTM) Wood Committee D07 to determine lumber modulus of elasticity. This commentary provides the user a quantitative view of six factors that affect the accuracy of using the...

  18. 77 FR 63831 - Consumer Advisory Committee

    Science.gov (United States)

    2012-10-17

    ... Commission to include people with disabilities, low income, and underserved populations in its Mobile Health... recommendation to the Committee regarding disclosure in political advertising. The Committee may also consider...

  19. 78 FR 66681 - Census Advisory Committees

    Science.gov (United States)

    2013-11-06

    ...;and investigations, committee meetings, agency decisions and rulings, #0;delegations of authority... interpretation or other auxiliary aids should be directed to the Committee Liaison Officer as soon as possible...

  20. 75 FR 55306 - Smart Grid Advisory Committee

    Science.gov (United States)

    2010-09-10

    ... accommodate Committee business. The final agenda will be posted on the Smart Grid Web site at http://www.nist.... The Committee shall provide input to NIST on the Smart Grid Standards, Priority, and Gaps. The... research and standards activities. 5. Upon request of the Director of NIST, the Committee will prepare...

  1. Minutes of the Twelfth LWR pressure vessel surveillance dosimtery improvement program meeting

    International Nuclear Information System (INIS)

    1989-01-01

    The 1983 Twelfth Light Water Reactor Pressure Vessel Surveillance Dosimetry Improvement Program (LWR-PV-SDIP) Meeting, which was held October 24-28, 1983. Sections 1 through 14 of this report provide documentation of agreements, commitments, and reports that are subject to the approval and concurrence of the participating laboratories and supporting agencies and organizations. Attachment No. 1 provides information on the preparation of a number of NUREG publications that will document the results of various aspects of the LWR-PV-SDIP. For each NUREG publication, a tentative ''Table of Contents'' is provided in addition to suggested interlaboratory writing assignments and camera-ready copy contribution due dates, as appropriate. Attachment No. 2 provides information on planning for the Fifth ASTM-EURATOM Symposium. Attachment No. 3 provides information on an ASTM press release about an MPC-6 meeting and dpa and E > 1 MeV exposure parameters. Attachments No. 4 and 5 provide copies of two LWR-PV-SDIP related papers presented at the Eleventh WRSR Information Meeting, October 24-28, 1983

  2. Multiprofessional committee on auditory health: COMUSA.

    Science.gov (United States)

    Lewis, Doris Ruthy; Marone, Silvio Antonio Monteiro; Mendes, Beatriz C A; Cruz, Oswaldo Laercio Mendonça; Nóbrega, Manoel de

    2010-01-01

    Created in 2007, COMUSA is a multiprofessional committee comprising speech therapy, otology, otorhinolaryngology and pediatrics with the aim of debating and countersigning auditory health actions for neonatal, lactating, preschool and school children, adolescents, adults and elderly persons. COMUSA includes representatives of the Brazilian Audiology Academy (Academia Brasileira de Audiologia or ABA), the Brazilian Otorhinolaryngology and Cervicofacial Surgery Association (Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico Facial or ABORL), the Brazilian Phonoaudiology Society (Sociedade Brasileira de Fonoaudiologia or SBFa), the Brazilian Otology Society (Sociedade Brasileira de Otologia or SBO), and the Brazilian Pediatrics Society (Sociedade Brasileira de Pediatria or SBP).

  3. Effects of Water Hardness on Spray Droplet Size Under Aerial Application Conditions

    Science.gov (United States)

    2008-01-01

    Nonimaging Light‐Scattering Instruments (ASTM, 2003). Table 1. Spray formulations for water hardness levels. Hardness (ppm) Tank, L (gal) Kocide, kg (lb...characteristics in a spray using optical nonimaging light‐scattering instruments. W. Conshohocken, Pa.: ASTM Intl. ASTM. 2004. E1620‐97. Standard

  4. Report of the Long-Range Planning Committee

    International Nuclear Information System (INIS)

    1984-01-01

    This is the final report of the Long-Range Planning Committee of the Lawrence Livermore National Laboratory. It describes the make-up, purpose, working assumptions, and activities of the Committee and discusses the work done by the Committee on defense matters, energy, a number of additional topics, and future long-range planning activities

  5. 78 FR 57128 - Forest Resource Coordinating Committee

    Science.gov (United States)

    2013-09-17

    ... agencies and the private sector, to effectively address the national priorities for non-industrial private... Coordinating Committee Web site at http://www.fs.fed.us/spf/coop/frcc/ . Visitors are encouraged to call ahead... Resource Coordinating Committee can be found by visiting the Committee's Web site at: http://www.fs.fed.us...

  6. The Committee System for Competitive Bids in Local Government

    Directory of Open Access Journals (Sweden)

    P Bolton

    2009-07-01

    Full Text Available When a municipality contracts for goods or services, it must make use of competitive bidding / a public call for tenders for contracts over R200 000 as well as for long term contracts. A competitive bidding process generally consists of different stages, for example, compiling bid specifications, advertising the bid, the receipt and evaluation of bids, and the award and implementation of the contract. The Municipal Supply Chain Management Regulations require a municipality’s Supply Chain Management Policy to provide for a committee system to oversee the different stages. Such committee system must, moreover, consist of at least a bid specification committee, a bid evaluation committee and a bid adjudication committee. Until recently, little attention has been given by the courts to the roles and composition of the different committees in the committee system. It is only after government, and in particular, municipalities have begun to implement the committee system in their procurement processes that it is evident that problems are arising. In recent months, the courts have increasingly had to deal with issues pertaining to the implementation of the committee system.In this article, the relevant legislative provisions on the committee system for competitive bids in local government are discussed. The functions of each committee are explained and all the cases that have thus far involved the implementation of the committee system are critically analysed. Much attention is given to the cases since they serve as a warning to municipalities to uphold and comply with the rules relating to the roles and composition of the different committees. The cases illustrate how important it is for municipalities to ensure that the different committees are properly constituted and that decisions at meetings are properly taken. They also highlight the importance of the supervisory role of the municipal manager over the different committees. In light of the

  7. 76 FR 34139 - Northeast Corridor Safety Committee; Meeting Postponement

    Science.gov (United States)

    2011-06-10

    .... 2] Northeast Corridor Safety Committee; Meeting Postponement AGENCY: Federal Railroad Administration... announced the first meeting of the Northeast Corridor Safety Committee, a Federal Advisory Committee... future date. DATES: The meeting of the Northeast Corridor Safety Committee scheduled to commence on...

  8. Fusion Policy Advisory Committee (FPAC)

    International Nuclear Information System (INIS)

    1990-09-01

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan

  9. miR-24 inhibits cell proliferation by suppressing expression of E2F2, MYC and other cell cycle regulatory genes by binding to “seedless” 3′UTR microRNA recognition elements

    Science.gov (United States)

    Lal, Ashish; Navarro, Francisco; Maher, Christopher; Maliszewski, Laura E.; Yan, Nan; O'Day, Elizabeth; Chowdhury, Dipanjan; Dykxhoorn, Derek M.; Tsai, Perry; Hofman, Oliver; Becker, Kevin G.; Gorospe, Myriam; Hide, Winston; Lieberman, Judy

    2009-01-01

    Summary miR-24, up-regulated during terminal differentiation of multiple lineages, inhibits cell cycle progression. Antagonizing miR-24 restores post-mitotic cell proliferation and enhances fibroblast proliferation, while over-expressing miR-24 increases the G1 compartment. The 248 mRNAs down-regulated upon miR-24 over-expression are highly enriched for DNA repair and cell cycle regulatory genes that form a direct interaction network with prominent nodes at genes that enhance (MYC, E2F2, CCNB1, CDC2) or inhibit (p27Kip1, VHL) cell cycle progression. miR-24 directly regulates MYC and E2F2 and some genes they transactivate. Enhanced proliferation from antagonizing miR-24 is abrogated by knocking down E2F2, but not MYC, and cell proliferation, inhibited by miR-24 over-expression, is rescued by miR-24-insensitive E2F2. Therefore, E2F2 is a critical miR-24 target. The E2F2 3′UTR lacks a predicted miR-24 recognition element. In fact, miR-24 regulates expression of E2F2, MYC, AURKB, CCNA2, CDC2, CDK4 and FEN1 by recognizing seedless, but highly complementary, sequences. PMID:19748357

  10. 78 FR 32403 - Arthritis Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-05-30

    ...] Arthritis Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice... Administration (FDA). The meeting will be open to the public. Name of Committee: Arthritis Advisory Committee..., the committee will discuss the Assessment of SpondyloArthritis international Society classification...

  11. Spectrophotometer-Based Color Measurements

    Science.gov (United States)

    2017-10-24

    equipment. There are several American Society for Testing and Materials ( ASTM ) chapters covering the use of spectrometers for color measurements (refs. 3...Perkin Elmer software and procedures described in ASTM chapter E308 (ref. 3). All spectral data was stored on the computer. A summary of the color...similarity, or lack thereof, between two colors (ref. 5). In this report, the Euclidean distance metric, E, is used and recommended in ASTM D2244

  12. Grain Refinement of Steels through Solidification Modification

    Science.gov (United States)

    2017-09-14

    machined the tensile bar samples into 0.5 inch diameter tensile bars that met ASTM E8. Tensile testing occurred on a 450 kN hydraulic mechanical test...frame. The tests followed ASTM E8 guidelines and used gage marks for elongation measurement. An optical emission spectrometer (OES) analyzed the...emission spectrometer samples. Half-inch diameter tensile bars were turned on a Lathe in accordance with ASTM ES and tested on a hydraulic universal

  13. 42 CFR 24.2 - Allocation.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Allocation. 24.2 Section 24.2 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL SENIOR BIOMEDICAL RESEARCH SERVICE § 24... talent. (e) The Secretary will ensure that SBRS slots are used in support of high priority programs...

  14. Misturas NR/SBR: modos de preparação e propriedades

    Directory of Open Access Journals (Sweden)

    Visconte Leila L. Y.

    2001-01-01

    Full Text Available Aplicações de artefatos de borracha muitas vezes requerem um conjunto de propriedades que não podem ser fornecidas por um único elastômero sendo, então necessário, que misturas de dois ou mais polímeros sejam empregadas. Nesses casos, os demais ingredientes que normalmente são adicionados, distribuem-se de modo diferente dependendo de sua afinidade com cada uma das borrachas. O grau de dispersão de cada um desses ingredientes em cada fase elastomérica irá influenciar a velocidade e o grau de vulcanização e, certamente, terá conseqüências sobre o desempenho do composto final. Neste trabalho, a borracha natural (NR foi misturada ao elastômero de butadieno-estireno (SBR na proporção de 1:1 em peso. As composições foram preparadas em misturador de cilindros, segundo a norma ASTM D 3182, empregando-se quatro maneiras distintas para a incorporação dos aditivos. Após a vulcanização foram estudadas propriedades mecânicas, como resistências à tração e ao rasgamento e dureza, propriedades termo-dinâmico-mecânicas e a morfologia de cada uma das composições. As propriedades mecânicas foram avaliadas de acordo com as normas ASTM específicas para cada ensaio. Os resultados mostram que, apesar de se usar a mesma formulação, o modo de preparo tem grande influência sobre as propriedades, o que é detectável pelas propriedades mecânicas e pela análise morfológica, e evidenciado através de testes sensíveis, como o dinâmico-mecânico. No caso da mistura NR/SBR as melhores propriedades são obtidas quando é favorecida a vulcanização da borracha que, isoladamente, apresenta propriedades inferiores.

  15. 22 CFR 214.37 - Public access to committee records.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Public access to committee records. 214.37 Section 214.37 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADVISORY COMMITTEE MANAGEMENT Operation of Advisory Committees § 214.37 Public access to committee records. Records maintained in...

  16. Changes of the mechanical properties of ASTM A 533 type B class 1 (JRQ) steel used in pressure vessels of nuclear power plants

    International Nuclear Information System (INIS)

    Balderrama, Juan J.; Iorio, Antonio F.

    1999-01-01

    The steels used in pressure vessels generally present a non-homogenous microstructure across the thickness of their walls due to their manufacturing process. Average thickness being between 200-250 mm also makes the problem more serious. These facts lead us to think that the variation affects not only microstructure, but also mechanical properties. For this reason the methodology for the evaluation of materials should be standardized for their use before and after radiation by means of a surveillance program which allows us to verify the conditions of the steel of the pressure vessel by using Charpy-v, tensile and fracto-mechanics specimens inside the reactor to obtain information about the condition of the pressure vessel material. In order to analyze these changes, tests were carried out using Charpy-v specimens with different orientation inside the block representing the wall thickness and the corresponding ductile-to-brittle transition curves were made for each direction. The orientations to be considered will be four in all and will be those called TL, LT, ST and LS by ASTM E 399 (1993). The conclusions reached arise from a comparative analysis of the results obtained for each orientation under study and confirm the recommendation by Standards regarding the selection of the TL orientation as the most conservative. (author)

  17. 75 FR 9616 - Committee Management Renewals

    Science.gov (United States)

    2010-03-03

    ... NATIONAL SCIENCE FOUNDATION Committee Management Renewals The NSF management officials having... follows consultation with the Committee Management Secretariat, General Services Administration... Industrial Innovations and Partnerships, 28164. Proposal Review Panel for Emerging Frontiers in Research and...

  18. 77 FR 12086 - Committee Management Renewals

    Science.gov (United States)

    2012-02-28

    ... NATIONAL SCIENCE FOUNDATION Committee Management Renewals The NSF management officials having... follows consultation with the Committee Management Secretariat, General Services Administration... Industrial Innovations and Partnerships, 28164 Proposal Review Panel for Emerging Frontiers in Research and...

  19. Plane strain fracture toughness tests on 2.4 and 3.9-inch-thick maraging steel specimens at various yield strength levels.

    Science.gov (United States)

    Fisher, D. M.; Repko, A. J.

    1972-01-01

    Tests of bend and compact specimens were conducted according to ASTM Tentative Method E 399-70T on a 200 grade maraging steel over a range of yield strengths from 123 to 234 ksi. The toughness of any given yield strength level was greater for the overaged condition than for the underaged. Some results which met the specimen size requirements of the method were distinctly lower than corresponding results from larger specimens. Inconsistencies in both validation and invalidation of results by the requirement for linearity of the test record were also noted.

  20. Human research ethics committees in technical universities.

    Science.gov (United States)

    Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

    2014-07-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

  1. Education of ethics committee members: experiences from Croatia.

    Science.gov (United States)

    Borovecki, A; ten Have, H; Oresković, S

    2006-03-01

    To study knowledge and attitudes of hospital ethics committee members at the first workshop for ethics committees in Croatia. Before/after cross-sectional study using a self administered questionnaire. Educational workshop for members of hospital ethics committees, Zagreb, 2003. Knowledge and attitudes of participants before and after the workshop; everyday functioning of hospital ethics committees. The majority of the respondents came from committees with at least five members. The majority of ethics committees were appointed by the governing bodies of their hospitals. Most committees were founded after the implementation of the law on health protection in 1997. Membership structure (three physicians and two members from other fields) and functions were established on the basis of that law. Analysis of research protocols was the main part of their work. Other important functions-education, case analysis, guidelines formation-were neglected. Members' level of knowledge was not sufficient for the complicated tasks they were supposed to perform. However, it was significantly higher after the workshop. Most respondents felt their knowledge should be improved by additional education. Their views on certain issues and bioethical dilemmas displayed a high level of paternalism and over protectiveness, which did not change after the workshop. The committees developed according to bureaucratic requirements. Furthermore, there are concerns about members' knowledge levels. More efforts need to be made to use education to improve the quality of the work. Additional research is necessary to explore ethics committees' work in Croatia especially in the hospital setting.

  2. Long acting risperidone in Australian patients with chronic schizophrenia: 24-month data from the e-STAR database

    Directory of Open Access Journals (Sweden)

    Lambert Tim

    2012-03-01

    Full Text Available Abstract Background This observational study was designed to collect treatment outcomes data in patients using the electronic Schizophrenia Treatment Adherence Registry (e-STAR. Methods Patients with schizophrenia or schizoaffective disorder in Australia who were prescribed risperidone long-acting injection (RLAI between 2003 and 2007 were assessed 12-months retrospectively, at baseline and 24-months prospectively at 3-monthly intervals. The intent-to-treat population, defined as all patients who received at least one dose of RLAI at baseline, was used for the efficacy and safety analyses. Results At total of 784 patients (74% with schizophrenia, 69.8% male with a mean age of 37.1 ± 12.5 years and 10.6 ± 9.5 years since diagnosis were included in this Australian cohort. A significant improvement in mean Clinical Global Impression - severity score was observed at 24-months (4.52 ± 1.04 at baseline, 3.56 ± 1.10 at 24-months. Most of this improvement was seen by 3-months and was also reflected in mean Global Assessment of Functioning score, which improved significantly at 24-months (42.9 ± 14.5 at baseline, 59 ± 15.4 at 24-months. For patients still receiving RLAI at 24-months there was an increase from a mean baseline RLAI dose of 26.4 ± 5 mg to 43.4 ± 15.7 mg. Sixty-six percent of patients discontinued RLAI before the 24-month period--this decreased to 46% once patients lost to follow-up were excluded. Conclusion Over the 24-month period, initiation of RLAI was associated with improved patient functioning and illness severity in patients with schizophrenia or schizoaffective disorder. Improved outcomes were observed early and sustained throughout the study. Trial Registration Clinical Trials Registration Number, NCT00283517.

  3. Nuclear Safety advisory committee (NSAC)

    International Nuclear Information System (INIS)

    1999-01-01

    The NNSA convened the 16th NSAC meeting in 1999. The Committee listened to the report by the NNSA relating to the fault of core barrel at the QNPP. And also the NNSA convened the 17th NSAC meeting in Beijing. The Committee listened to the report by the NNSA relating to the review and assessment on the application of CP at the JTNPP and discussed on the granting of CP and the related license conditions at the JTNPP. The Sub-Committee of NSAC of the NNSA on siting convened and enlarged meeting for a consulting with the domestic experts on the issue of seismic response spectrum in design at the JTNPP

  4. 75 FR 5629 - NASA Advisory Council; Audit, Finance and Analysis Committee; Meeting

    Science.gov (United States)

    2010-02-03

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-018)] NASA Advisory Council; Audit... Analysis Committee of the NASA Advisory Council. DATES: Wednesday, February 17, 2010, 9 a.m.-4 p.m. EST. ADDRESSES: NASA Headquarters, 300 E Street, SW., Washington, DC 20456, Conference Room 8D48. FOR FURTHER...

  5. 76 FR 29195 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2011-05-20

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  6. 78 FR 57839 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2013-09-20

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  7. 78 FR 29704 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2013-05-21

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  8. 78 FR 292 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2013-01-03

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  9. 77 FR 3232 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2012-01-23

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  10. 76 FR 59659 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2011-09-27

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  11. 77 FR 32570 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2012-06-01

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee...

  12. 3-[(E-(2,4-Dichloropbenzylideneamino]benzoic acid

    Directory of Open Access Journals (Sweden)

    Adnan Ashraf

    2011-01-01

    Full Text Available In the crystal of the title compound, C14H9Cl2NO2, inversion-related dimers with R22(8 ring motifs are formed by intermolecular O—H...O hydrogen bonding. The 3-aminobenzoic acid group and the 2,4-dichlobenzaldehyde moiety subtend a dihedral angle of 55.10 (2°. The H atom of the carboxyl group is disordered over two sites with equal occupancies.

  13. Fusion Energy Advisory Committee: Advice and recommendations to the Department of Energy in partial response to the Charge Letter of September 24, 1991: Part A

    International Nuclear Information System (INIS)

    1991-10-01

    This document is a compilation of the written records that relate to the Fusion Energy Advisory Committee's initial deliberations with regard to the Letter of Charge received from the Director of Energy Research, dated September 24, 1991. In particular. during its first meeting in September 1991, FEAC provided its initial response to the three points of charge, which are outlined below: ''I would like to explore seriously the programmatic implications of this recommendation under two budget scenarios -- a constant dollar budget for magnetic fusion through FY 1996 and a budget at 5% real growth per year through FY 1996. I am therefore charging FEAC to advise me on the following questions. Identify how available funds now used for BPX, as well as a modest increase (described above) could be used to strengthen the eidsting base program for magnetic fusion research; within the above envelope of funding, identify what follow-on experimental devices for the US fusion program might be planned for use after the completion of experiments at TF-RR and before the planned start of ITER operation. For such devices, indicate how they would fit into the international fusion program; and what should be the US position on the appropriate scope, timing, and mission of ITER if BPX does not go forward?

  14. REVIEW OF THE NEGOTIATION OF THE MODEL PROTOCOL ADDITIONAL TO THE AGREEMENT(S) BETWEEN STATE(S) AND THE INTERNATIONAL ATOMIC ENERGY AGENCY FOR THE APPLICATION OF SAFEGUARDS, INFCIRC/540 (Corrected) VOLUME III/III, IAEA COMMITTEE 24, DEVELOPMENT OF INFCIRC/540, ARTICLE-BY-ARTICLE REVIEW (1996-1997).

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.D.; Houck, F.

    2010-01-01

    In this section of the report, the development of INFCIRC/540 is traced by a compilation of citations from the IAEA documents presented to the Board of Governors and the records of discussions in the Board that took place prior to the establishment of Committee 24 as well as the documents and discussions of that committee. The evolution of the text is presented separately for each article or, for the more complex articles, for each paragraph or group of paragraphs of the article. This section covers all articles, including those involving no issues. Background, issues, interpretations and conclusions, which were addressed in Volumes I, II, and III are not repeated here. The comments by states that are included are generally limited to objections and suggested changes. Requests for clarification or elaboration have been omitted, although it is recognized that such comments were sometimes veiled objections.

  15. 76 FR 45578 - Request for Nominations for Members on a Public Advisory Committee; Medical Imaging Drugs...

    Science.gov (United States)

    2011-07-29

    ... committees and, therefore, extends particular encouragement to nominations for appropriately qualified female... each nominee, current business and/or home address, telephone number, and e-mail address if available...

  16. 77 FR 56242 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2012-09-12

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  17. 78 FR 43254 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2013-07-19

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  18. 78 FR 20156 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2013-04-03

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  19. 78 FR 2706 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2013-01-14

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  20. 32 CFR 2700.51 - Information Security Oversight Committee.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Information Security Oversight Committee. 2700... MICRONESIAN STATUS NEGOTIATIONS SECURITY INFORMATION REGULATIONS Implementation and Review § 2700.51 Information Security Oversight Committee. The OMSN Information Security Oversight Committee shall be chaired...