WorldWideScience

Sample records for assessment platform cap

  1. Capping soft tailings from a floating platform

    Energy Technology Data Exchange (ETDEWEB)

    Costello, M.; Van Kesteren, W.; Hedblom, E. [Alberta Univ., Edmonton, AB (Canada). Oil Sands Tailings Research Facility

    2010-07-01

    This PowerPoint presentation discussed methods of capping oil sands soft tailings from a floating platform. Caps on soft sediments at various locations throughout the world were analyzed in order to determine their water content and surface shear strength. A small-scale raining project was conducted at Stryker Bay to cap tailings with 150,000 m{sup 3} of sand. A small-scale rainbowing project at Soda Lake delivered sand at a rate of between 20 to 60 m{sup 3}/hr. A large-scale rainbowing project in Rotterdam delivered 2000 m{sup 3}/hr of sand. The capping and dredging project cost $12 per m{sup 3}. Case studies of various capping projects were presented in order to describe and demonstrate the floating platform technique as well as the installation of wicks and drains. The method can be used to cap very soft tailings with thin, uniform lifts. tabs., figs.

  2. A mobile phone-based care model for outpatient cardiac rehabilitation: the care assessment platform (CAP

    Directory of Open Access Journals (Sweden)

    Francis Rebecca

    2010-01-01

    Full Text Available Abstract Background Cardiac rehabilitation programs offer effective means to prevent recurrence of a cardiac event, but poor uptake of current programs have been reported globally. Home based models are considered as a feasible alternative to avoid various barriers related to care centre based programs. This paper sets out the study design for a clinical trial seeking to test the hypothesis that these programs can be better and more efficiently supported with novel Information and Communication Technologies (ICT. Methods/Design We have integrated mobile phones and web services into a comprehensive home- based care model for outpatient cardiac rehabilitation. Mobile phones with a built-in accelerometer sensor are used to measure physical exercise and WellnessDiary software is used to collect information on patients' physiological risk factors and other health information. Video and teleconferencing are used for mentoring sessions aiming at behavioural modifications through goal setting. The mentors use web-portal to facilitate personal goal setting and to assess the progress of each patient in the program. Educational multimedia content are stored or transferred via messaging systems to the patients phone to be viewed on demand. We have designed a randomised controlled trial to compare the health outcomes and cost efficiency of the proposed model with a traditional community based rehabilitation program. The main outcome measure is adherence to physical exercise guidelines. Discussion The study will provide evidence on using mobile phones and web services for mentoring and self management in a home-based care model targeting sustainable behavioural modifications in cardiac rehabilitation patients. Trial registration The trial has been registered in the Australian New Zealand Clinical Trials Registry (ANZCTR with number ACTRN12609000251224.

  3. 高度重视临床研究伦理平台建设,大力推进我国CAP评估%Attach Great Importance to Clinical Research Ethics Platform Construction, and Vigorously Promote China CAP Assessment

    Institute of Scientific and Technical Information of China (English)

    白桦; 王思成; 熊宁宁; 张金钟; 张忠元; 徐春波

    2013-01-01

    2012年9月国家中医药管理局正式委托世界中医药学会联合会组织开展“中医药临床研究伦理审查平台评估”(CAP)。通过对已完成评估的20家医疗卫生机构的伦理审查平台情况进行综合分析,结合当前美国的伦理监管体系,论述我国自主评估品牌CAP的重要特点,“以评促建”和“持续改进”的实践与受益,以及大力推进CAP评估的重要意义。%In September 2012, the "Assessment for Ethics Review of Traditional Chinese Medicine (TCM) Re-search with Human Participants" (named CAP, Chinese medicine assessment human research protection system) was officially commissioned to the World Federation of Chinese Medicine Societies to organize by the State Ad-ministration of TCM. Through the assessment of 20 medical institutions, a comprehensive analysis on ethical re-view platform was conducted. Combined with current regulatory system of ethics in the U.S., this article discussed independent assessment on important CAP features of local brands, the practice and benefit of "construction pro-motion based on assessment" and "continuous improvement," as well as the importance of vigorously promote CAP assessment .

  4. CAP-88, Dose Risk Assessment from Air Emissions of Radionuclides

    International Nuclear Information System (INIS)

    1 - Description of program or function: The Clean Air Act Assessment Package-1988 (CAP-88) is designed for assessment of dose and risk from radionuclide emissions to air in compliance with National Emission Standards for Hazardous Air Pollutants (NESHAPs) for Radionuclides. CAP-88 estimates health impacts from the inhalation, ingestion, air immersion and ground surface irradiation pathways, and tabulates results for maximally exposed individuals and regional populations out to 80 kilometers. The system provides risk information in a concise, easy-to-read format and prints an echo of the input. CAP-88 consists of updated versions of the mainframe codes AIRDOS-EPA and DARTAB. Atmospheric dispersion and deposition are calculated by AIRDOS2. Dose and risk assessment tables are calculated by DARTAB2 from the binary output file produced by AIRDOS2 and a file of dose and risk factors calculated by RADRISK. Pre-processors (PREPAR2 and PREDA) for AIRDOS2 and DARTAB2 access data bases of element and nuclide dependent data to simplify the execution of the principal programs. 2 - Method of solution: AIRDOS-EPA implements a long term average Gaussian Plume model. The associated terrestrial model for deposition is based on NRC Regulatory Guide 1.109. The 50-year effective dose equivalent factors for DARTAB2 are calculated by RADRISK and use weighting factors from ICRP-26. Risks are calculated using a linear Life Table model consistent with BEIR-3. The resultant risk factors are 4.0E-4 cancer deaths per rem and 3.6E-4 cancer deaths per person working-level-month exposure to radon decay products. CAP88-PC (CCC-0542/02) is able to use population data and weather data downloaded from mainframe versions of CAP-88. CAP88-PC also comes with sample population arrays from some DOE facilities, and includes weather data from many DOE sites and major U.S. cities. 3 - Restrictions on the complexity of the problem: Programs are limited to 36 radionuclides and to 20 downwind distances for each

  5. Assessing the value of price caps and floors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This publication assesses the long-term economic and climatic effects of introducing price caps and price floors in hypothetical global climate change mitigation policy. Based on emission trends, abatement costs and equilibrium climate sensitivity from IPCC and IEA reports, this quantitative analysis confirms that price caps could significantly reduce economic uncertainty. This uncertainty stems primarily from unpredictable economic growth and energy prices, and ultimately unabated emission trends. In addition, the development of abatement technologies is uncertain. Furthermore,this analysis shows that rigid targets may entail greater economic risks with little or no comparative advantage for the climate. More ambitious emission objectives, combined with price caps and price floors, could still entail significantly lower expected costs while driving similar, or even slightly better, climatic outcomes in probabilistic terms.

  6. Whole-Exome Enrichment with the Roche NimbleGen SeqCap EZ Exome Library SR Platform

    OpenAIRE

    Chen, Rui; Im, Hogune; Snyder, Michael

    2015-01-01

    Multiple platforms are available for whole-exome enrichment and sequencing (WES). This protocol is based on the Roche NimbleGen SeqCap EZ Exome Library SR platform, which enriches for ~44 Mb of the human exonic regions. The SeqCap system uses 55- to 105-base DNA probes to capture known coding DNA sequences (CDS) from the NCBI Consensus CDS Database, RefSeq, and Sanger miRBase. The protocol can be performed at the benchside without the need for automation, and the resulting library can be used...

  7. Magnetic susceptibility variations of the Ediacaran cap carbonates in the Yangtze platform and their implications for paleoclimate

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Magnetic susceptibility (MS) data were obtained from 11 sections of the Doushantuo (Ediacaran) cap carbonate that directly overlies the Nantuo glacial diamictite in the southeastern margin of the Yangtze platform. The MS data revealed two regionally correlatable peaks at the bottom and top of the cap carbonate, separated by an interval of low values. The lower MS peak coincides with high percentage of insoluble siliciclastic residues that are compositionally identical to the matrix of the underlying diamictite, suggesting its origin controlled mainly by detrital components during the first phase of cap carbonate deposition at the end of the glaciation. The upper MS peak is associated with high clay content and iron sulfides, and can be interpreted as either derived from enhanced greenhouse weathering that could have brought more terrigenous components into the ocean, or the result of ocean anoxia at the late stage of cap carbonate deposition that could led to formation of abundant iron sulfides. The regionally consistent MS curves from the cap carbonates provided the first geophysical record for the rapid climate change from icehouse to greenhouse conditions in the aftermath of the Neoproterozoic "snowball Earth" event.

  8. Biobjective Performance Assessment with the COCO Platform

    OpenAIRE

    Brockhoff, Dimo; Tušar, Tea; Tušar, Dejan; Wagner, Tobias; Hansen, Nikolaus; Auger, Anne

    2016-01-01

    This document details the rationales behind assessing the performance of numerical black-box optimizers on multi-objective problems within the COCO platform and in particular on the biobjective test suite bbob-biobj. The evaluation is based on a hypervolume of all non-dominated solutions in the archive of candidate solutions and measures the runtime until the hypervolume value succeeds prescribed target values.

  9. Cross-platform digital assessment forms for evaluating surgical skills

    Directory of Open Access Journals (Sweden)

    Steven Arild Wuyts Andersen

    2015-04-01

    Full Text Available A variety of structured assessment tools for use in surgical training have been reported, but extant assessment tools often employ paper-based rating forms. Digital assessment forms for evaluating surgical skills could potentially offer advantages over paper-based forms, especially in complex assessment situations. In this paper, we report on the development of cross-platform digital assessment forms for use with multiple raters in order to facilitate the automatic processing of surgical skills assessments that include structured ratings. The FileMaker 13 platform was used to create a database containing the digital assessment forms, because this software has cross-platform functionality on both desktop computers and handheld devices. The database is hosted online, and the rating forms can therefore also be accessed through most modern web browsers. Cross-platform digital assessment forms were developed for the rating of surgical skills. The database platform used in this study was reasonably priced, intuitive for the user, and flexible. The forms have been provided online as free downloads that may serve as the basis for further development or as inspiration for future efforts. In conclusion, digital assessment forms can be used for the structured rating of surgical skills and have the potential to be especially useful in complex assessment situations with multiple raters, repeated assessments in various times and locations, and situations requiring substantial subsequent data processing or complex score calculations.

  10. CAPS Capsule: The National Assessment of Educational Progress, Concept and Organization, Vol. 3, No. 2.

    Science.gov (United States)

    Mattson, Judith, Ed.

    The Winter, 1970 issue of CAPS Capsule concerns the concept and structure of the National Assessment of Educational Progress (NAEP), which responds to the need to look at the outputs of education. Frank B. Womer, Staff Director of NAEP, discusses the following: (1) NAEP's origin; (2) the subject areas selected for assessment; (3) the development…

  11. Wikis as Platforms for Authentic Assessment

    Science.gov (United States)

    Eddy, Pamela L.; Lawrence, April

    2013-01-01

    Calls for accountability focus attention on assessment of student learning. Authentic assessment involves evaluating student learning as students perform real world tasks. We present a four-stage conceptual framework for authentic assessment. We argue first that evaluation is a process rather than a static one-time event. Second, authentic…

  12. After the Cap: Risk Assessment, Citizen Science and Disaster Recovery

    Directory of Open Access Journals (Sweden)

    Sabrina McCormick

    2012-12-01

    Full Text Available I used the 2010 Deepwater Horizon oil spill to examine how crowdsourcing is used as a new form of citizen science that provides real time assessments of health-related exposures. Assessing risks of an oil spill, or disasters more generally, is a challenge complicated by the situated nature of knowledge-generation that results in differential perceptions and responses. These processes are critical in the case of the British Petroleum spill in the Gulf Coast since the identification of risks promises to have ramifications for multiple social actors, as well as the health status and long-term resilience of communities in the area. Qualitative interviews, ethnographic observations, and video data were collected with local social movement organizations, grassroots groups, spill workers, fisherman, local residents, scientists, and government representatives within five months of the spill. Findings suggest that crowdsourcing is a new form of citizen science reflecting a transition from lay mapping to an online data gathering system that allows a broader range of participation and the detection of a broader range of impacts. Outcomes of this research promise to help demonstrate and theorize how citizen science relates to risk assessment processes and affects disaster recovery and long-term response.

  13. US and MR imaging in the assessment of cartilage cap thickness in osteocartilaginous exostoses

    International Nuclear Information System (INIS)

    This paper determines the accuracy of high- resolution real-time US and MR imaging in the assessment of cartilage cap thickness in osteocartilaginous exostoses, an important feature that may suggest malignant transformation. Sonography and MR imaging (T1- and T2-weighted spin-echo [SE] sequences, fast imaging with steady precession [FISP] sequence) of 14 patients were performed prospectively; all patients underwent surgical excision. US and MR results were compared with findings in those assessed pathoanatomically

  14. Design and Assessment of an Intelligent Activity Monitoring Platform

    Directory of Open Access Journals (Sweden)

    Monique Thonnat

    2005-08-01

    Full Text Available We are interested in designing a reusable and robust activity monitoring platform. We propose three good properties that an activity monitoring platform should have to enable its reusability for different applications and to insure performance quality: (1 modularity and flexibility of the architecture, (2 separation between the algorithms and the a priori knowledge they use, and (3 automatic evaluation of algorithm results. We then propose a development methodology to fulfill the last two properties. The methodology consists in the interaction between end-users and developers during the whole development of a specific monitoring system. To validate our approach, we present a platform used to generate activity monitoring systems dedicated to specific applications, we also describe in details the technical validation and the end-user assessment of an automatic metro monitoring system built with the platform and briefly the validation results for bank agency monitoring and building access control.

  15. PROPOSED PROCEDURE FOR ASSESSMENT OF EXISTING PLATFORMS IN INDONESIA

    OpenAIRE

    Ricky L. Tawekal

    2005-01-01

    Off-shore platforms were built since the 1970âs in Indonesia, but there is no local code or recommended practice for their design or assessment procedure. The common practice is to use the recommended practice issued by the American Petroleum Institute, API RP2A. The off-shore platforms built in the 1970âs must be re-qualified due to exceedance of the design life. This paper discuss the assessment procedure given in the API RP2A WSD 21th edition, API RP2A LRFD, dan ISO 19902 (draft E â 2001)....

  16. Price caps and price floors in climate policy: a quantitative assessment

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, Cedric

    2008-12-15

    This study assesses the long-term economic and environmental effects of introducing price caps and price floors in hypothetical climate change mitigation architecture, which aims to reduce global energy-related CO2 emissions by 50% by 2050. Based on abatement costs in IPCC and IEA reports, this quantitative analysis confirms what qualitative analyses have already suggested: introducing price caps could significantly reduce economic uncertainty. This uncertainty stems primarily from unpredictable economic growth and energy prices, and ultimately unabated emission trends. In addition, the development of abatement technologies is uncertain. With price caps, the expected costs could be reduced by about 50% and the uncertainty on economic costs could be one order of magnitude lower. Reducing economic uncertainties may spur the adoption of more ambitious policies by helping to alleviate policy makers' concerns of economic risks. Meanwhile, price floors would reduce the level of emissions beyond the objective if the abatement costs ended up lower than forecasted. If caps and floors are commensurate with the ambition of the policy pursued and combined with slightly tightened emission objectives, climatic results could be on average similar to those achieved with 'straight' objectives (i.e. with no cost-containment mechanism). (auth)

  17. Development of an E- Assessment Platform for Nigerian Universities

    OpenAIRE

    O. Akinsanmi

    2010-01-01

    This paper presents the development of an e-assessment platform for application in Nigerianuniversities. Ahmadu Bello University, Zaria, Nigeria was used as a testing ground in 2008. In the age ofdigitalization that we live in, it has become imperative that a reliable means of assessing students using internetbasedtechnologies be developed. This paper seeks to solve a part of that problem by designing and developinga web application where tests in multiple choice formats will be taken online ...

  18. THE SINGLE PAYMENT SCHEME IN THE IMPACT ASSESSMENT OF THE CAP "HEATH CHECK"

    OpenAIRE

    Velazquez, Beatriz E.

    2008-01-01

    Based on the comprehensive Impact assessment of potential changes to the CAP that accompanied the HC legal proposals tabled by the Commission on 20th May 2008, this paper focuses on the impact analysis of options for adjustment of the Single Payment Scheme. It is put in evidence the distributional implications of the current SPS models as well as the link between the payment distribution with structural variables. Open issues that lead to the need of adjusting the system are also presented. T...

  19. Deliverable 3.3.1 - Assessment Methodology on ISISEMD platform

    DEFF Research Database (Denmark)

    Peterson, Carrie Beth

    2009-01-01

    The overall goal of the ISISEMD project is to offer innovative ICT services to improve the quality of life of elderly persons with cognitive problems or mild dementia and their informal and formal caregivers who provide every day care for them. This will be done via the ISISEMD platform – a...... platform of intelligent scalable ICT services which will be tested for a period of 12 months under realistic conditions with end-users. In order to analyse the impact and the outcome from introducing these services, after the one year of pilot operation, overall assessment will be carried out by the...

  20. Supramolecular Self-Assembly of Histidine-Capped-Dialkoxy-Anthracene: A Visible Light Triggered Platform for facile siRNA Delivery

    KAUST Repository

    Patil, Sachin

    2016-06-29

    Supramolecular self-assembly of histidine-capped-dialkoxy-anthracene (HDA) results in the formation of light responsive nanostructures.Single-crystal X-ray diffraction analysis of HDA shows two types of hydrogen bonding. The first hydrogen bond is established between the imidazole moieties while the second involves the oxygen atom of one amide group and the hydrogen atom of a second amide group. When protonated in acidic aqueous media, HDA successfully complexes siRNA yielding spherical nanostructures. This biocompatible platform controllably delivers siRNA with high efficacy upon visible light irradiation leading up to 90% of gene silencing in live cells.

  1. Assessing the effects of CO2 price caps on electricity investments-A real options analysis

    International Nuclear Information System (INIS)

    This paper uses real options modeling to assess the impact of different climate change policy instruments on investment, profits and cumulative emissions in the electricity sector. Even though CO2 price caps or 'safety valves' have been suggested as methods to limit uncertainty emanating from fluctuating prices of CO2 permits that would hurt the industry's profit and thereby also energy security, our analysis shows that price caps set at a too low level are detrimental to the adoption of e.g. modern biomass-fired capacity as a replacement for existing coal-fired power plants. We therefore conduct a series of experiments with different policy scenarios to analyze under which regime emissions are most effectively reduced. With respect to CO2 price uncertainty, it turns out that even for moderately rising CO2 prices, fluctuations frequently lead to investment into carbon capture and storage (CCS), while investment is often not triggered in the face of deterministic CO2 prices

  2. Offshore Platform Hydrocarbon Risk Assessment – OPHRA: Feasibility

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan; Kozine, Igor; Markert, Frank

    and data needed for the risk assessment framework, and provides specific suggestions for some of those models. Some preliminary calculations with the DES model have been performed to illustrate type of results that can be obtained and to provide some insight in the accuracy and computational efforts......This report describes the feasibility demonstration of a new method to perform risk assessments for offshore platforms. This method simulates the following phenomena as concurrent sequences of events using the Arena® Discrete Event Simulation (DES) software (version 14.50.00): • Release, ignition....... Finally, further work is identified in order to develop an operational risk assessment tool....

  3. Practical assessment of Biba integrity for TCG-enabled platforms

    OpenAIRE

    Lioy, Antonio; Ramunno, Gianluca; Sassu, Roberto

    2014-01-01

    Checking the integrity of an application is necessary to determine if the latter will behave as expected. The method defined by the Trusted Computing Group consists in evaluating the fingerprints of the platform hardware and software components required for the proper functioning of the application to be assessed. However, this only ensures that a process was working correctly at load-time but not for its whole life-cycle. Policy-Reduced Integrity Measurement Architecture (PRIMA) addresses th...

  4. Platform for Assessing Strategic Alignment Using Enterprise Architecture: Application to E-Government Process Assessment

    CERN Document Server

    Elhari, Kaoutar

    2011-01-01

    This paper presents an overview of S2AEA (v2) (Strategic Alignment Assessment based on Enterprise Architecture (version2)), a platform for modelling enterprise architecture and for assessing strategic alignment based on internal enterprise architecture metrics. The idea of the platform is based on the fact that enterprise architecture provides a structure for business processes and information systems that supports them. This structure can be used to measure the degree of consistency between business strategies and information systems. In that sense, this paper presents a platform illustrating the role of enterprise architecture in the strategic alignment assessment. This assessment can be used in auditing information systems. The platform is applied to assess an e-government process.

  5. Platform for Assessing Strategic Alignment Using Enterprise Architecture: Application to E-Government Process Assessment

    Directory of Open Access Journals (Sweden)

    Kaoutar Elhari

    2011-01-01

    Full Text Available This paper presents an overview of S2AEA (v2 (Strategic Alignment Assessment based on Enterprise Architecture (version2, a platform for modelling enterprise architecture and for assessing strategic alignment based on internal enterprise architecture metrics. The idea of the platform is based on the fact that enterprise architecture provides a structure for business processes and information systems that supports them. This structure can be used to measure the degree of consistency between business strategies and information systems. In that sense, this paper presents a platform illustrating the role of enterprise architecture in the strategic alignment assessment. This assessment can be used in auditing information systems. The platform is applied to assess an e-government process.

  6. System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters

    Directory of Open Access Journals (Sweden)

    V.J. Kurian

    2014-12-01

    Full Text Available Reliability of offshore platforms has become a very important issue in the Malaysian Oil and Gas Industry as, majority of the jacket platforms in Malaysian waters to date, have exceeded their design life. Reliability of a jacket platform can be assessed through reliability index and probability of failure. Conventional metocean consideration uses 100 year return period wave height associated with 100 year return period current velocity and wind speed. However, recent study shows that for Malaysian waters, the proposed metocean consideration should be 100 year return period wave height associated with 10 year return period current velocity and wind speed. Hence, this research investigated the effect of different metocean consideration, to system-based reliability of jacket platforms in Malaysian waters. Prior to that, the effect of different metocean consideration to the pushover analysis has also been studied. Besides, the significance of Pile Soil Interaction (PSI, wave direction and platform geometry were analyzed in a sensitivity study. Pushover analysis was performed on three jacket platforms representing three water regions in Malaysia to obtain Reserve Strength Ratio (RSR as an indicator of the reliability of the jackets. Utilizing sensitivity study parameters mentioned above, seven different case studies were undertaken to study their significance on RSR. The RSR values of each case study were compared and incorporated as resistance model of reliability analysis. Besides, platform specific response model of each jacket has been generated using response surface technique which was later incorporated into the limit state function for reliability analysis. Reliability analysis using First Order Reliability Method (FORM has been conducted in MATLAB to obtain the reliability index and probability of failure. Results from the reliability analysis were compared to analyze the effect of different metocean consideration. In this study, an updated

  7. Platform for Assessing Strategic Alignment Using Enterprise Architecture: Application to E-Government Process Assessment

    OpenAIRE

    Kaoutar Elhari; Bouchaib Bounabat

    2011-01-01

    This paper presents an overview of S2AEA (v2) (Strategic Alignment Assessment based on Enterprise Architecture (version2)), a platform for modelling enterprise architecture and for assessing strategic alignment based on internal enterprise architecture metrics. The idea of the platform is based on the fact that enterprise architecture provides a structure for business processes and information systems that supports them. This structure can be used to measure the degree of consistency between ...

  8. PLINIUS-2. A new versatile platform for severe accident assessments

    International Nuclear Information System (INIS)

    The current PLINIUS platform at CEA Cadarache is a coherent set of experimental facilities devoted to knowledge improvements on corium behavior in severe accident conditions, model developments and code validation in view of performing reactor case calculations. In the frame of recent National and International Programs it provided numerous experimental results used for generation 2 and 3 reactors concerning major phenomena occurring during severe accident like Fuel Coolant Interaction (FCI) and Molten Corium Concrete Interaction (MCCI) as well as new data for thermophysical and thermochemical properties of the molten corium. One specific characteristic of this experimental platform is to produce significant masses of prototypical material (containing depleted uranium) molten at temperatures above 3000K and to carry out experiments with pools containing both metals and oxides, simulating most of the phenomena occurring in case of severe accident, except the non-thermal effects of radioactive decay. Moreover, specific measurements techniques have been developed giving a high level of accuracy of the results and allowing the assessment of analytical models like the fragmentation of the corium in the water. The mass of usable corium is limited to about 50 kg with the current furnaces and, even though some corium interaction experiments are already carried out in PLINIUS platform for generation 4 sodium fast reactors, sodium cannot be used in the current facility. Therefore, CEA has decided the building of a new large scale prototypic corium facility to extend its current PLINIUS corium platform. This new versatile facility, called PLINIUS 2, shall be devoted to both water and sodium-cooled reactor severe accident experimental simulation. This corium platform will cover all the R and D needs of the existing reactors, of new light water reactor designs and of the ASTRID project. It will be composed of a furnace able to melt 200 to 500 kg of corium including nuclear fuel

  9. Evaluation of CT-DEA performance on Ca/P ratio assessment in bone apatite using EDX

    OpenAIRE

    Hadjipanteli, A.; Speller, R.; Kourkoumelis, N.

    2014-01-01

    The aim of this study is to evaluate the performance of a new computed tomography-dual energy analysis (CT-DEA) technique developed for the non-invasive assessment of the 3D spatial distribution of calcium/phosphorus (Ca/P) ratio in bone. For this, the Ca/P ratio in 58 regions from four healthy and four inflammation-mediated osteoporotic (IMO) rabbit bone collagen-free samples were assessed using energy dispersive X-ray spectroscopy (EDX) and CT-DEA. Image registration, performed using NifTK ...

  10. PROPOSED PROCEDURE FOR ASSESSMENT OF EXISTING PLATFORMS IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Ricky L. Tawekal

    2005-01-01

    Full Text Available Off-shore platforms were built since the 1970’s in Indonesia, but there is no local code or recommended practice for their design or assessment procedure. The common practice is to use the recommended practice issued by the American Petroleum Institute, API RP2A. The off-shore platforms built in the 1970’s must be re-qualified due to exceedance of the design life. This paper discuss the assessment procedure given in the API RP2A WSD 21th edition, API RP2A LRFD, dan ISO 19902 (draft E – 2001. Problems usually arise due to the fact that the original design was based on API RP2A 10th edition and assessment is done using the new edition which is the 21th edition. Abstract in Bahasa Indonesia : Sejak tahun 1970-an di Indonesia terdapat banyak anjungan lepas pantai, tetapi sampai saat ini belum ada peraturan atau tata cara untuk perencanaan dan penelaahannya. Anjungan lepas pantai biasanya direncanakan berdasarkan Recommended Practice yang diterbitkan oleh American Petroleum Institute, API RP2A. Pada saat ini dirasakan adanya kebutuhan untuk melakukan penelaahan kelayakan struktur anjungan lepas pantai yang telah dibangun sejak tahun 1970-an tersebut. Makalah ini membahas prosedur cara penelaahan anjungan lepas pantai yang diatur dalam API RP2A WSD edisi 21, API RP2A LRFD, dan ISO 19902 (draft E – 2001. Masalah biasanya akan timbul karena perencanaan didasarkan kepada API RP2A edisi 10 sedangkan penelaahan kelayakan didasarkan kepada edisi yang terbaru (edisi 21

  11. Clinical and Radiographic Assessment of the Efficacy of Calcium Silicate Indirect Pulp Capping

    Science.gov (United States)

    Hashem, D.; Mannocci, F.; Patel, S.; Manoharan, A.; Brown, J.E.; Watson, T.F.

    2015-01-01

    The aims of this study were to assess the effectiveness of calcium silicate cement (Biodentine) versus glass ionomer cement (GIC; control group) as indirect pulp capping materials in patients with reversible pulpitis and to compare the effectiveness of cone beam computed tomography (CBCT) versus periapical (PA) radiographs in detecting PA changes at baseline (T0) and at 12 mo (T12) postoperatively. Seventy-two restorations (36 Biodentine, 36 Fuji IX) were placed randomly in 53 patients. CBCT/PA radiographs were taken at T0 and T12. Two calibrated examiners assessed the presence/absence and increase/decrease in the size of existing PA radiolucencies under standardized conditions. The Kappa coefficient evaluated statistically the effectiveness of CBCT versus PA radiographs in detecting PA changes. Chi-square/Mann-Whitney tests were used to evaluate the association between PA changes in CBCT with various clinical measures. Significance was predetermined at α = 0.05. Clinical success rates for Biodentine and Fuji IX GIC were 83.3%. CBCT was significantly more effective in detecting PA radiolucencies compared with radiographs (P = 0.0069). Of the teeth, 65.4% and 90.4% were deemed healthy using CBCT and PA radiographs, respectively, at T12. Healing/healed rates were 17.3%/0%, while new/progressed radiolucency were 30.8%/9.6% with CBCT/PA radiographs, respectively. Seventy-one percent of healed lesions had received Biodentine; 88% of new/progressed lesions received Fuji IX GIC. Teeth presenting with an initial CBCT PA lesion had a failure rate of 63%, whereas teeth with no initial lesion had a failure rate of 16%. Although no statistically significant difference was detected in the clinical efficacy of Biodentine/Fuji IX when used as indirect pulp capping materials in patients with reversible pulpitis, CBCT showed a significant difference in that most healed CBCT lesions had received Biodentine while most that did not heal received Fuji IX. Longer-term follow-up is

  12. Status of Net Metering: Assessing the Potential to Reach Program Caps

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, J.; Gelman, R.; Bird, L.

    2014-09-01

    Several states are addressing the issue of net metering program caps, which limit the total amount of net metered generating capacity that can be installed in a state or utility service territory. In this analysis, we examine net metering caps to gain perspective on how long net metering will be available in various jurisdictions under current policies. We also surveyed state practices and experience to understand important policy design considerations.

  13. Assessing the measurement of aerosol single scattering albedo by Cavity Attenuated Phase-Shift Single Scattering Monitor (CAPS PMssa)

    Science.gov (United States)

    Perim de Faria, Julia; Bundke, Ulrich; Onasch, Timothy B.; Freedman, Andrew; Petzold, Andreas

    2016-04-01

    The necessity to quantify the direct impact of aerosol particles on climate forcing is already well known; assessing this impact requires continuous and systematic measurements of the aerosol optical properties. Two of the main parameters that need to be accurately measured are the aerosol optical depth and single scattering albedo (SSA, defined as the ratio of particulate scattering to extinction). The measurement of single scattering albedo commonly involves the measurement of two optical parameters, the scattering and the absorption coefficients. Although there are well established technologies to measure both of these parameters, the use of two separate instruments with different principles and uncertainties represents potential sources of significant errors and biases. Based on the recently developed cavity attenuated phase shift particle extinction monitor (CAPS PM_{ex) instrument, the CAPS PM_{ssa instrument combines the CAPS technology to measure particle extinction with an integrating sphere capable of simultaneously measuring the scattering coefficient of the same sample. The scattering channel is calibrated to the extinction channel, such that the accuracy of the single scattering albedo measurement is only a function of the accuracy of the extinction measurement and the nephelometer truncation losses. This gives the instrument an accurate and direct measurement of the single scattering albedo. In this study, we assess the measurements of both the extinction and scattering channels of the CAPS PM_{ssa through intercomparisons with Mie theory, as a fundamental comparison, and with proven technologies, such as integrating nephelometers and filter-based absorption monitors. For comparison, we use two nephelometers, a TSI 3563 and an Aurora 4000, and two measurements of the absorption coefficient, using a Particulate Soot Absorption Photometer (PSAP) and a Multi Angle Absorption Photometer (MAAP). We also assess the indirect absorption coefficient

  14. Cross-platform digital assessment forms for evaluating surgical skills

    DEFF Research Database (Denmark)

    Andersen, Steven Arild Wuyts

    2015-01-01

    developed for the rating of surgical skills. The database platform used in this study was reasonably priced, intuitive for the user, and flexible. The forms have been provided online as free downloads that may serve as the basis for further development or as inspiration for future efforts. In conclusion...

  15. Liver Steatosis Assessed by Controlled Attenuation Parameter (CAP) Measured with the XL Probe of the FibroScan: A Pilot Study Assessing Diagnostic Accuracy.

    Science.gov (United States)

    Sasso, Magali; Audière, Stéphane; Kemgang, Astrid; Gaouar, Farid; Corpechot, Christophe; Chazouillères, Olivier; Fournier, Céline; Golsztejn, Olivier; Prince, Stéphane; Menu, Yves; Sandrin, Laurent; Miette, Véronique

    2016-01-01

    To assess liver steatosis, the controlled attenuation parameter (CAP; giving an estimate of ultrasound attenuation ∼3.5 MHz) is available with the M probe of the FibroScan. We report on the adaptation of the CAP for the FibroScan XL probe (center frequency 2.5 MHz) without modifying the range of values (100-400 dB/m). CAP validation was successfully performed on Field II simulations and on tissue-mimicking phantoms. In vivo performance was assessed in a cohort of 59 patients spanning the range of steatosis. In vivo reproducibility was good and similar with both probes. The area under receiver operative characteristic curve was equal to 0.83/0.84 and 0.92/0.91 for the M/XL probes to detect >2% and >16% liver fat, respectively, as assessed by magnetic resonance imaging. Patients can now be assessed simultaneously for steatosis and fibrosis using the FibroScan, regardless of their morphology. PMID:26386476

  16. WCDMA Uplink Interference Assessment from Multiple High Altitude Platform Configurations

    Directory of Open Access Journals (Sweden)

    A. Mohammed

    2008-06-01

    Full Text Available We investigate the possibility of multiple high altitude platform (HAP coverage of a common cell area using a wideband code division multiple access (WCDMA system. In particular, we study the uplink system performance of the system. The results show that depending on the traffic demand and the type of service used, there is a possibility of deploying 3–6 HAPs covering the same cell area. The results also show the effect of cell radius on performance and the position of the multiple HAP base stations which give the worst performance.

  17. Assessment of baseline socio-economic conditions of beneficiaries of SANREM/CAPs Project: Case study of smallholder farmers in eastern Uganda and western Kenya

    OpenAIRE

    Owori, M.

    2013-01-01

    The purpose of this study is to assess baseline socio-economic data collected from 790 households (HHs) in the SANREM/CRSP conservation agricultural production systems (CAPS) project areas of Trans-Nzoia and Bungoma districts in western Kenya, and Tororo and Kapchorwa districts in eastern Uganda. Surveys were administered before local farmers began working closely with researchers to co-design and test improved CAPS. The aim of my analysis is to identify socio-economic differences in the four...

  18. Colorado Assessment of Problem Solving (CAPS) -- Identifying student's problem solving skills

    Science.gov (United States)

    Adams, Wendy; Wieman, Carl

    2009-05-01

    Problem solving is central to any physics curriculum and physics educators have put extensive effort into understanding successful problem solving; however, there is currently no efficient way to evaluate problem solving skill. Attempts have been made in the past; however, knowledge of the principles required to solve the subject problem are so absolutely critical that they completely overshadow any other skills students may use when solving a problem. The work presented here is unique because CAPS removes the requirement that the student already have a grasp of physics concepts. CAPS has been developed and validated at Colorado and measures a person's competence in 44 separate skills that are used when solving a wide range of in-depth problems including classical mechanics and quantum mechanics problems. Understanding the specific processes that impact how a person solves a problem identifies which components are specific to physics and those that transfer across discipline, and provides insight for improved methods for teaching. 1. Supported in part by funding from National Science Foundation

  19. Probabilistic Reliability Assessment of Truss Construction in Matlab Software Platform

    OpenAIRE

    Vašek Jakub; Krejsa Martin

    2014-01-01

    This paper deals with the use of probabilistic methods in assessing the reliability of the planar truss support structure. Classical Monte Carlo simulation technique was chosen for calculation of failure probability in structural elements and the entire support system under assessment. Numerical calculation was applied in MATLAB software system using the random number generator and parallelization using multi-core processors. The aim of the study was to analyze the usability of MATLAB for pro...

  20. An integrated platform for assessing biologics (Conference Presentation)

    Science.gov (United States)

    Schein, Perry; O'Dell, Dakota; Erickson, David

    2016-04-01

    Protein therapeutics are a rapidly growing portion of the pharmaceuticals market and have many significant advantages over traditional small molecule drugs. As this market expands, however, critical regulatory and quality control issues remain, most notably the problem of protein aggregation. Individual target proteins often aggregate into larger masses which trigger an immune response in the body, which can reduce the efficacy of the drug for its intended purpose, or cause serious anaphylactic side-effects. Although detecting and minimizing aggregate formation is critical to ensure an effective product, aggregation dynamics are often highly complicated and there is little hope of reliable prediction and prevention from first principles. This problem is compounded for aggregates in the subvisible range of 100 nm to 10 micrometers where traditional techniques for detecting aggregates have significant limitations. Here, we present an integrated optofluidic platform for detecting nanoscale protein aggregates and characterizing interactions between these aggregates and a reference surface. By delivering light to a solution of proteins with an optical waveguide, scattered light from individual protein aggregates can be detected and analyzed to determine the force profile between each particle and the waveguide surface. Unlike existing methods which only determine size or charge, our label-free screening technique can directly measure the surface interaction forces between single aggregates and the glass substrate. This direct measurement capability may allow for better empirical predictions of the stability of protein aggregates during drug manufacturing and storage.

  1. Construction of life cycle assessment software system platform

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ya-ping; ZUO Yu-hui

    2007-01-01

    There has not been life cycle assessment (LCA) software applicable to China's products. To faciliate the develop-ment of LCA software system in China, we built an object-oriented LCA software system plantform based on LCA international standards ISO 14040 to ISO 14043 and the commonness of diverse products. The system includes six modules: disassembly module, data collection module, arithmetic module, drawing module, database module and control module. It evaluates all economic and environmental impacts during the whole life cycle of a product. The integrated life cycle inventory database system allows dynamic expansion, which makes the effort required for data collection reduce with the increase of the system's application. With the improvement of human environmental-awareness, the demand of environment-friendly products is increasing, and ecological design of products has become a critical part in products development. Consummation of the LCA software system will provide a powerful tool for designing and developing Chinese ecological products.

  2. A Global Refiability Assessment Method on Aging Offshore Platforms with Corrosion and Cracks

    Institute of Scientific and Technical Information of China (English)

    JI Chun-yan; LI Shan-shan; CHEN Ming-lu

    2009-01-01

    Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example.

  3. Silver-capped silicon nanopillar platforms for adsorption studies of folic acid using surface enhanced Raman spectroscopy and density functional theory

    DEFF Research Database (Denmark)

    Castillo, Jaime; Rindzevicius, Tomas; Wu, Kaiyu;

    2015-01-01

    adsorption of FA on silver-capped silicon nanopillar substrates employing surface enhanced Raman scattering spectroscopy and density functional theory calculations. The experimentally observed vibrations from free FA and FA bound to the Ag surface display different vibrational spectra indicating chemical...... interaction of the molecule with the metal surface. Density functional theory calculations show that the Ag–FA interaction is primarily through the nitrogen from the pteridine ring anchoring to the Ag metal surface. To investigate the Ag–FA binding behavior further, the adsorption isotherm of FA on the silver...

  4. Thermo-economic assessment of the integration of steam cycles on offshore platforms

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Tock, Laurence; Breuhaus, Peter;

    2014-01-01

    The integration of steam bottoming cycles on oil platforms is often seen as a possible route to mitigate the CO2-emissions offshore. In this paper, a North Sea platform and its energy requirements are systematically analysed. The site-scale integration of steam networks is assessed by using...... thermodynamic and economic performance indicators. The results illustrate the benefits of converting the gas turbines into a combined cycle. Using seawater results in smaller power generation and greater CO2-emissions than using process water, as the additional power generation in the combined cycle is...

  5. An implementation and test platform for wide area stability assessment methods

    DEFF Research Database (Denmark)

    Wittrock, Martin Lindholm; Jóhannsson, Hjörtur

    2013-01-01

    This paper presents a software platform developed in MatLab with the purpose of supporting research, Development and testing of wide area algorithms for stability assessment and control. The development and testing process of algorithms exploiting real time wide area data from Phasor Measurement...... Units (PMU) can be very time consuming, especially if the testing procedure is not carried out in a systematic and automatic manner. The test platform overcomes this problem by automatically importing system model parameters, topology and simulation output from a time domain simulation of an instability...

  6. Use of the NetBeans Platform for NASA Robotic Conjunction Assessment Risk Analysis

    Science.gov (United States)

    Sabey, Nickolas J.

    2014-01-01

    The latest Java and JavaFX technologies are very attractive software platforms for customers involved in space mission operations such as those of NASA and the US Air Force. For NASA Robotic Conjunction Assessment Risk Analysis (CARA), the NetBeans platform provided an environment in which scalable software solutions could be developed quickly and efficiently. Both Java 8 and the NetBeans platform are in the process of simplifying CARA development in secure environments by providing a significant amount of capability in a single accredited package, where accreditation alone can account for 6-8 months for each library or software application. Capabilities either in use or being investigated by CARA include: 2D and 3D displays with JavaFX, parallelization with the new Streams API, and scalability through the NetBeans plugin architecture.

  7. The ORNL Indoor Air Quality Study: Re-cap, Context, and Assessment on Radon

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, Bruce Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rose, Erin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ternes, Mark P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    As part of the retrospective evaluation of the U.S. Department of Energy s low-income Weatherization Assistance Program that was led by Oak Ridge National Laboratory (ORNL), an assessment of the impacts of weatherization on indoor air quality (IAQ) was conducted. This assessment included nearly 500 treatment and control homes across the country. Homes were monitored for carbon monoxide, radon, formaldehyde, temperature and humidity pre- and post-weatherization. This report focuses on the topic of radon and addresses issues not thoroughly discussed in the original IAQ report. The size, scope and rigor of the radon component of the IAQ study are compared to previous studies that assessed the impacts of weatherization on indoor radon levels. It is found that the ORNL study is by far the most extensive study conducted to date, though the ORNL results are consistent with the findings of the other studies. However, the study does have limitations related to its reliance on short-term measurements of radon and inability to attribute changes in radon levels in homes post-weatherization to specific weatherization measures individually or in combination.

  8. Clinical and radiographic assessment of the efficacy of calcium silicate indirect pulp capping: a randomized controlled clinical trial.

    Science.gov (United States)

    Hashem, D; Mannocci, F; Patel, S; Manoharan, A; Brown, J E; Watson, T F; Banerjee, A

    2015-04-01

    The aims of this study were to assess the effectiveness of calcium silicate cement (Biodentine) versus glass ionomer cement (GIC; control group) as indirect pulp capping materials in patients with reversible pulpitis and to compare the effectiveness of cone beam computed tomography (CBCT) versus periapical (PA) radiographs in detecting PA changes at baseline (T0) and at 12 mo (T12) postoperatively. Seventy-two restorations (36 Biodentine, 36 Fuji IX) were placed randomly in 53 patients. CBCT/PA radiographs were taken at T0 and T12. Two calibrated examiners assessed the presence/absence and increase/decrease in the size of existing PA radiolucencies under standardized conditions. The Kappa coefficient evaluated statistically the effectiveness of CBCT versus PA radiographs in detecting PA changes. Chi-square/Mann-Whitney tests were used to evaluate the association between PA changes in CBCT with various clinical measures. Significance was predetermined at α = 0.05. Clinical success rates for Biodentine and Fuji IX GIC were 83.3%. CBCT was significantly more effective in detecting PA radiolucencies compared with radiographs (P = 0.0069). Of the teeth, 65.4% and 90.4% were deemed healthy using CBCT and PA radiographs, respectively, at T12. Healing/healed rates were 17.3%/0%, while new/progressed radiolucency were 30.8%/9.6% with CBCT/PA radiographs, respectively. Seventy-one percent of healed lesions had received Biodentine; 88% of new/progressed lesions received Fuji IX GIC. Teeth presenting with an initial CBCT PA lesion had a failure rate of 63%, whereas teeth with no initial lesion had a failure rate of 16%. Although no statistically significant difference was detected in the clinical efficacy of Biodentine/Fuji IX when used as indirect pulp capping materials in patients with reversible pulpitis, CBCT showed a significant difference in that most healed CBCT lesions had received Biodentine while most that did not heal received Fuji IX. Longer-term follow-up is

  9. Death cap

    DEFF Research Database (Denmark)

    Rudbæk, Torsten R; Kofoed, Pernille Bouteloup; Bove, Jeppe;

    2014-01-01

    Death cap (Amanita phalloides) is commonly found and is one of the five most toxic fungi in Denmark. Toxicity is due to amatoxin, and poisoning is a serious medical condition, causing organ failure with potential fatal outcome. Acknowledgement and clarification of exposure, symptomatic and focused...

  10. Assessment of genetic variation in Bulgarian tomato (Solanum lycopersicum L.) genotypes, using fluorescent SSR genotyping platform

    OpenAIRE

    TODOROVSKA, Elena; IVANOVA, Albena; Daniela GANEVA; Galina PEVICHAROVA; Molle, Emil; Bojinov, Bojin; Radkova, Mariana; Danailov, Zhivko

    2014-01-01

    Genetic variability in modern crops is limited due to domestication and selection processes. Genetic variation in eight Bulgarian tomato varieties and breeding lines (variety Plovdivska karotina, variety IZK Alya, L21β, L53β, L1140, L1116, L975, L984) differing in their morphological and biochemical composition was assessed using a highly efficient and low-cost fluorescent simple sequence repeat (SSR) genotyping platform. Genotyping was conducted with 165 publicly available microsatellite mar...

  11. An integrated telemedicine platform for the assessment of affective physiological states

    OpenAIRE

    Ganiatsas George; Katsis Christos D; Fotiadis Dimitrios I

    2006-01-01

    Abstract AUBADE is an integrated platform built for the affective assessment of individuals. The system performs evaluation of the emotional state by classifying vectors of features extracted from: facial Electromyogram, Respiration, Electrodermal Activity and Electrocardiogram. The AUBADE system consists of: (a) a multisensorial wearable, (b) a data acquisition and wireless communication module, (c) a feature extraction module, (d) a 3D facial animation module which is used for the projectio...

  12. USGS National Assessment of Oil and Gas Project - Cherokee Platform Province Assessment Units

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is...

  13. Comparison of CAP88 PC Ver. 3.0 and MAXDOSE dose assessment models involving co-located stack releases at the Savannah River site.

    Science.gov (United States)

    Farfán, Eduardo; Jannik, G Timothy; Lee, Patricia; Powell, Aaron

    2013-08-01

    The Savannah River National Laboratory's Environmental Dosimetry Group performs dosimetry assessments for Savannah River Site (SRS) radionuclide air emissions utilizing the Clean Air Act Assessment Package-1988 (CAP88) code (CAP88 PC Ver. 3.0) and the MAXDOSE-SR Ver. 2011 code, which is an SRS-specific version of the Nuclear Regulatory Commission's MAXIGASP code. CAP88 PC and MAXDOSE-SR are used at SRS for demonstrating compliance with Environmental Protection Agency dose standards for radionuclide emissions to the atmosphere and Department of Energy Order 458.1 dose standards, respectively. During a routine comparison of these two assessment models, it was discovered that CAP88 PC Ver. 3.0 was not producing the expected results when using multiple co-located stacks in a single run. Specifically, if the stack heights are considered separately, the results for several radionuclides (but not all) differ from the combined run [i.e., 1 + 2 does not equal (1+2)]. Additionally, when two or more stack heights are considered in a run, the results depend on the order of the selected stack heights. For example, for a two stack-height run of 0 meter and 61 m input produces different results from a 61 m and 0 m input run. This study presents a comparison of CAP88 PC Ver. 3.0 and MAXDOSE-SR Ver. 2011 based on SRS input data and on two-stack release scenarios. The selected radionuclides for this study included gases/vapors (H, C, Kr, and I) and particulates (Sr, Cs, Pu, and Am) commonly encountered at SRS. PMID:23803669

  14. SYMBIOSE: A modeling and simulation platform for environmental chemical risk assessment

    International Nuclear Information System (INIS)

    Environmental systems are considered among the most complex ones because they involve a large number of diverse components, interactions, scale issues, spatial heterogeneity and significant sources of uncertainty. An Environmental Chemical Risk Assessment (ECRA) require therefore the integration of a wide range of data and modeling approaches, while accounting for sources and propagation of uncertainties in the system. Further, the level of detail to be achieved in an assessment depends mainly on environmental management objectives and the difficulty of adequately describing exposure, toxicity and other properties of the chemicals with site-specific data. This can range from simplistic conservative analyses to more realistic spatiotemporal modeling approaches. As a consequence, there is a pressing need for integrated, flexible (and user-friendly) tools that could adapt to this shifting and expanding assessment context. The SYMBIOSE project aims at developing such a modeling and simulation platform, for assessing the fate, transport and effects of chemicals - radionuclides and heavy metals, mainly - on humans and biota, in a multi-media environment. The various aspects of an environmental chemical risk assessment process, and existing relationships between them, are first revisited in a comprehensive way with emphasis on valuable modeling techniques. The modeling approach that will be implemented in the platform is then described through keystone aspects such as conceptual, mathematical and spatial modeling aspects. Finally, some key ideas about the object-oriented software architecture that is foreseen are presented. (author)

  15. Integrated numerical platforms for environmental dose assessments of large tritium inventory facilities

    International Nuclear Information System (INIS)

    Related with a prospected new scenario of large inventory tritium facilities [KATRIN at TLK, CANDUs, ITER, EAST, other coming] the prescribed dosimetric limits by ICRP-60 for tritium committed-doses are under discussion requiring, in parallel, to surmount the highly conservative assessments by increasing the refinement of dosimetric-assessments in many aspects. Precise Lagrangian-computations of dosimetric cloud-evolution after standardized (normal/incidental/SBO) tritium cloud emissions are today numerically open to the perfect match of real-time meteorological-data, and patterns data at diverse scales for prompt/early and chronic tritium dose assessments. The trends towards integrated-numerical-platforms for environmental-dose assessments of large tritium inventory facilities under development.

  16. Exergetic assessment of energy systems on North Sea oil and gas platforms

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Pierobon, Leonardo; Elmegaard, Brian;

    2013-01-01

    -temperature gases from the utility and flaring systems is the major contributor to the exergy losses. These findings suggest to focus efforts on a better use of the waste heat contained in the exhaust gases and on the ways in which the gas compression performance can be improved. © 2013 Elsevier Ltd. All rights...... offshore system is described: its thermodynamic performance is assessed by performing an exergy accounting and rules of thumb for oil and gas platforms are derived. Simulations are built and conducted with the tools Aspen Plus_, Dynamic Network Analysis and Aspen HYSYS_. 62e65% of the total exergy...... destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35 e38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high...

  17. Assessment of the real-time PCR and different digital PCR platforms for DNA quantification.

    Science.gov (United States)

    Pavšič, Jernej; Žel, Jana; Milavec, Mojca

    2016-01-01

    Digital PCR (dPCR) is beginning to supersede real-time PCR (qPCR) for quantification of nucleic acids in many different applications. Several analytical properties of the two most commonly used dPCR platforms, namely the QX100 system (Bio-Rad) and the 12.765 array of the Biomark system (Fluidigm), have already been evaluated and compared with those of qPCR. However, to the best of our knowledge, direct comparison between the three of these platforms using the same DNA material has not been done, and the 37 K array on the Biomark system has also not been evaluated in terms of linearity, analytical sensitivity and limit of quantification. Here, a first assessment of qPCR, the QX100 system and both arrays of the Biomark system was performed with plasmid and genomic DNA from human cytomegalovirus. With use of PCR components that alter the efficiency of qPCR, each dPCR platform demonstrated consistent copy-number estimations, which indicates the high resilience of dPCR. Two approaches, one considering the total reaction volume and the other considering the effective reaction size, were used to assess linearity, analytical sensitivity and variability. When the total reaction volume was considered, the best performance was observed with qPCR, followed by the QX100 system and the Biomark system. In contrast, when the effective reaction size was considered, all three platforms showed almost equal limits of detection and variability. Although dPCR might not always be more appropriate than qPCR for quantification of low copy numbers, dPCR is a suitable method for robust and reproducible quantification of viral DNA, and a promising technology for the higher-order reference measurement method. PMID:26521179

  18. The TRIPOD e-learning Platform for the Training of Earthquake Safety Assessment

    Science.gov (United States)

    Coppari, S.; Di Pasquale, G.; Goretti, A.; Papa, F.; Papa, S.; Paoli, G.; Pizza, A. G.; Severino, M.

    2008-07-01

    The paper summarizes the results of the in progress EU Project titled TRIPOD (Training Civil Engineers on Post-Earthquake Safety Assessment of Damaged Buildings), funded under the Leonardo Da Vinci program. The main theme of the project is the development of a methodology and a learning platform for the training of technicians involved in post-earthquake building safety inspections. In the event of a catastrophic earthquake, emergency building inspections constitute a major undertaking with severe social impact. Given the inevitable chaotic conditions and the urgent need of a great number of specialized individuals to carry out inspections, past experience indicates that inspection teams are often formed in an adhoc manner, under stressful conditions, at a varying levels of technical expertise and experience, sometime impairing the reliability and consistency of the inspection results. Furthermore each Country has its own building damage and safety assessment methodology, developed according to its experience, laws, building technology and seismicity. This holds also for the partners participating to the project (Greece, Italy, Turkey, Cyprus), that all come from seismically sensitive Mediterranean countries. The project aims at alleviating the above shortcomings by designing and developing a training methodology and e-platform, forming a complete training program targeted at inspection engineers, specialized personnel and civil protection agencies. The e-learning platform will provide flexible and friendly authoring mechanisms, self-teaching and assessment capabilities, course and trainee management, etc. Courses will be also made available as stand-alone multimedia applications on CD and in the form of a complete pocket handbook. Moreover the project will offer the possibility of upgrading different experiences and practices: a first step towards the harmonization of methodologies and tools of different Countries sharing similar problems. Finally, through wide

  19. The TRIPOD e-learning Platform for the Training of Earthquake Safety Assessment

    International Nuclear Information System (INIS)

    The paper summarizes the results of the in progress EU Project titled TRIPOD (Training Civil Engineers on Post-Earthquake Safety Assessment of Damaged Buildings), funded under the Leonardo Da Vinci program. The main theme of the project is the development of a methodology and a learning platform for the training of technicians involved in post-earthquake building safety inspections. In the event of a catastrophic earthquake, emergency building inspections constitute a major undertaking with severe social impact. Given the inevitable chaotic conditions and the urgent need of a great number of specialized individuals to carry out inspections, past experience indicates that inspection teams are often formed in an adhoc manner, under stressful conditions, at a varying levels of technical expertise and experience, sometime impairing the reliability and consistency of the inspection results. Furthermore each Country has its own building damage and safety assessment methodology, developed according to its experience, laws, building technology and seismicity. This holds also for the partners participating to the project (Greece, Italy, Turkey, Cyprus), that all come from seismically sensitive Mediterranean countries. The project aims at alleviating the above shortcomings by designing and developing a training methodology and e-platform, forming a complete training program targeted at inspection engineers, specialized personnel and civil protection agencies. The e-learning platform will provide flexible and friendly authoring mechanisms, self-teaching and assessment capabilities, course and trainee management, etc. Courses will be also made available as stand-alone multimedia applications on CD and in the form of a complete pocket handbook. Moreover the project will offer the possibility of upgrading different experiences and practices: a first step towards the harmonization of methodologies and tools of different Countries sharing similar problems. Finally, through wide

  20. Integrated Modelling Platform for Dynamic Performance Assessment of Floating Wind Turbines

    OpenAIRE

    Endegnanew, Atsede Gualu; Satertro, Kristian; Gjerde, Sverre Skalleberg; Svendsen, Harald Georg; Anaya-Lara, Olimpo; Tande, John Olav Giæver; Uhlen, Kjetil; Gjolmesli, Svein

    2015-01-01

    The paper presents an integrated modelling platform that can be used to assess the dynamic performance of an offshore wind turbine mounted on a spar-buoy type floater. Sub-models of generator and converter controllers and the power network are combined with a state-of-the-art numerical simulation of the hydro-, aero- and structural dynamic behavior of the floating wind turbine, using FEDEM Windpower software. The aim is to provide a tool that allows analyzing response of floating turbines to ...

  1. Tile-in-ONE: A web platform which integrates Tile Calorimeter data quality and calibration assessment

    Science.gov (United States)

    Sivolella, A.; Ferreira, F.; Maidantchik, C.; Solans, C.; Solodkov, A.; Burghgrave, B.; Smirnov, Y.

    2015-12-01

    The ATLAS Tile Calorimeter collaboration assesses the quality of calibration data in order to ensure its proper operation. A number of tasks is then performed by executing several tools and accessing web systems, which were independently developed to meet distinct collaboration's requirements and do not necessarily are connected with each other. Thus, to attend the collaboration needs, several programs are usually implemented without a global perspective of the detector, requiring basic software features. In addition, functionalities may overlap in their objectives and frequently replicate resources retrieval mechanisms. Tile-in-ONE is a designed and implemented platform that assembles various web systems used by the calorimeter community through a single framework and a standard technology. It provides an infrastructure to support the code implementation, avoiding duplication of work while integrating with an overall view of the detector status. Database connectors smooth the process of information access since developers do not need to be aware of where records are placed and how to extract them. Within the environment, a dashboard stands for a particular Tile operation aspect and gets together plug-ins, i.e. software components that add specific features to an existing application. A server contains the platform core, which represents the basic environment to deal with the configuration, manage user settings and load plug-ins at runtime. A web middleware assists users to develop their own plug-ins, perform tests and integrate them into the platform as a whole. Backends are employed to allow that any type of application is interpreted and displayed in a uniform way. This paper describes Tile-in-ONE web platform.

  2. Exergetic assessment of energy systems on North Sea oil and gas platforms

    International Nuclear Information System (INIS)

    Oil and gas platforms in the North Sea region are associated with high power consumption and large CO2-emissions, as the processing and utility plants suffer from significant changes in production rates and performance losses over the field lifespan. In this paper, a generic model of the overall offshore system is described: its thermodynamic performance is assessed by performing an exergy accounting and rules of thumb for oil and gas platforms are derived. Simulations are built and conducted with the tools Aspen Plus®, Dynamic Network Analysis and Aspen HYSYS®. 62–65% of the total exergy destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35–38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high-temperature gases from the utility and flaring systems is the major contributor to the exergy losses. These findings suggest to focus efforts on a better use of the waste heat contained in the exhaust gases and on the ways in which the gas compression performance can be improved. - Highlights: • North Sea oil and gas platforms are investigated and a generic model is developed. • Exergy analysis of these offshore facilities is performed. • Most of the total exergy destruction is attributable to the utility systems producing the electrical power required onsite. • Rejection of the exhaust gases from the utility systems is the major exergy loss of this system. • The highest thermodynamic performance is reached with low well-fluid content of water and gas

  3. OpenQuake, a platform for collaborative seismic hazard and risk assessment

    Science.gov (United States)

    Henshaw, Paul; Burton, Christopher; Butler, Lars; Crowley, Helen; Danciu, Laurentiu; Nastasi, Matteo; Monelli, Damiano; Pagani, Marco; Panzeri, Luigi; Simionato, Michele; Silva, Vitor; Vallarelli, Giuseppe; Weatherill, Graeme; Wyss, Ben

    2013-04-01

    Sharing of data and risk information, best practices, and approaches across the globe is key to assessing risk more effectively. Through global projects, open-source IT development and collaborations with more than 10 regions, leading experts are collaboratively developing unique global datasets, best practice, tools and models for global seismic hazard and risk assessment, within the context of the Global Earthquake Model (GEM). Guided by the needs and experiences of governments, companies and international organisations, all contributions are being integrated into OpenQuake: a web-based platform that - together with other resources - will become accessible in 2014. With OpenQuake, stakeholders worldwide will be able to calculate, visualize and investigate earthquake hazard and risk, capture new data and share findings for joint learning. The platform is envisaged as a collaborative hub for earthquake risk assessment, used at global and local scales, around which an active network of users has formed. OpenQuake will comprise both online and offline tools, many of which can also be used independently. One of the first steps in OpenQuake development was the creation of open-source software for advanced seismic hazard and risk calculations at any scale, the OpenQuake Engine. Although in continuous development, a command-line version of the software is already being test-driven and used by hundreds worldwide; from non-profits in Central Asia, seismologists in sub-Saharan Africa and companies in South Asia to the European seismic hazard harmonization programme (SHARE). In addition, several technical trainings were organized with scientists from different regions of the world (sub-Saharan Africa, Central Asia, Asia-Pacific) to introduce the engine and other OpenQuake tools to the community, something that will continue to happen over the coming years. Other tools that are being developed of direct interest to the hazard community are: • OpenQuake Modeller; fundamental

  4. Radioactive airborne effluents and the environmental impact assessment of CAP1400 nuclear power plant under normal operation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Qiong; Guo, RuiPing; Zhang, ChunMing; Chen, XiaoQiu; Wang, Bo, E-mail: wangbo@chinansc.cn

    2014-12-15

    Highlights: • Typical radionuclides dispersion from CAP1400 under normal operation was simulated. • Modified Gaussian model considered radioactive decay, dry and wet deposition and so on. • The radioactive impact pathways on the public through atmosphere were compared. • The maximum individual effective dose was lower than the public irradiation limit. - Abstract: China Advanced Passive nuclear power plant with installed capacity reaching to 1400 MW (CAP1400) is independently designed as the China's state-of-the-art third generation nuclear power brand based on AP1000 technology digestion and absorption. The concentration of typical radionuclides dispersed from CAP1400 under normal operation was calculated with modified Gaussian model, considering mixed layer height, dry deposition, wet deposition, radioactive decay and so on. The atmospheric dispersion factors, ground deposition rate, individual dose and public dose were also investigated to estimate the radioactive effects of CAP1400 under normal operation on surrounding environment and human beings. The radioactive impact pathways on the public through atmosphere, such as immersion irradiation in the smoke plume, internal irradiation from ingestion and inhalation and external irradiation from surface deposition were briefly introduced with focus on the comparison of the maximum individual effective dose to different group from atmospheric dispersion. All computation results show that the maximum individual irradiation dose happened to children with total effective irradiation dose of 4.52E−03 mSv/y, which was lower than the public irradiation limit of 0.25 mSv/y.

  5. Radioactive airborne effluents and the environmental impact assessment of CAP1400 nuclear power plant under normal operation

    International Nuclear Information System (INIS)

    Highlights: • Typical radionuclides dispersion from CAP1400 under normal operation was simulated. • Modified Gaussian model considered radioactive decay, dry and wet deposition and so on. • The radioactive impact pathways on the public through atmosphere were compared. • The maximum individual effective dose was lower than the public irradiation limit. - Abstract: China Advanced Passive nuclear power plant with installed capacity reaching to 1400 MW (CAP1400) is independently designed as the China's state-of-the-art third generation nuclear power brand based on AP1000 technology digestion and absorption. The concentration of typical radionuclides dispersed from CAP1400 under normal operation was calculated with modified Gaussian model, considering mixed layer height, dry deposition, wet deposition, radioactive decay and so on. The atmospheric dispersion factors, ground deposition rate, individual dose and public dose were also investigated to estimate the radioactive effects of CAP1400 under normal operation on surrounding environment and human beings. The radioactive impact pathways on the public through atmosphere, such as immersion irradiation in the smoke plume, internal irradiation from ingestion and inhalation and external irradiation from surface deposition were briefly introduced with focus on the comparison of the maximum individual effective dose to different group from atmospheric dispersion. All computation results show that the maximum individual irradiation dose happened to children with total effective irradiation dose of 4.52E−03 mSv/y, which was lower than the public irradiation limit of 0.25 mSv/y

  6. Microchip screening platform for single cell assessment of NK cell cytotoxicity

    Directory of Open Access Journals (Sweden)

    Karolin eGuldevall

    2016-04-01

    Full Text Available Here we report a screening platform for assessment of the cytotoxic potential of individual natural killer (NK cells within larger populations. Human primary NK cells were distributed across a silicon-glass microchip containing 32 400 individual microwells loaded with target cells. Through fluorescence screening and automated image analysis the numbers of NK and live or dead target cells in each well could be assessed at different time points after initial mixing. Cytotoxicity was also studied by time-lapse live-cell imaging in microwells quantifying the killing potential of individual NK cells. Although most resting NK cells (≈75% were non-cytotoxic against the leukemia cell line K562, some NK cells were able to kill several (≥3 target cells within the 12 hours long experiment. In addition, the screening approach was adapted to increase the chance to find and evaluate serial killing NK cells. Even if the cytotoxic potential varied between donors it was evident that a small fraction of highly cytotoxic NK cells were responsible for a substantial portion of the killing. We demonstrate multiple assays where our platform can be used to enumerate and characterize cytotoxic cells, such as NK or T cells. This approach could find use in clinical applications, e.g. in the selection of donors for stem cell transplantation or generation of highly specific and cytotoxic cells for adoptive immunotherapy.

  7. Comparison of Unmanned Aerial Vehicle Platforms for Assessing Vegetation Cover in Sagebrush Steppe Ecosystems

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Breckenridge; Maxine Dakins; Stephen Bunting; Jerry Harbour; Sera White

    2011-09-01

    In this study, the use of unmanned aerial vehicles (UAVs) as a quick and safe method for monitoring biotic resources was evaluated. Vegetation cover and the amount of bare ground are important factors in understanding the sustainability of many ecosystems and assessment of rangeland health. Methods that improve speed and cost efficiency could greatly improve how biotic resources are monitored on western lands. Sagebrush steppe ecosystems provide important habitat for a variety of species (including sage grouse and pygmy rabbit). Improved methods are needed to support monitoring these habitats because there are not enough resource specialists or funds available for comprehensive ground evaluations. In this project, two UAV platforms, fixed wing and helicopter, were used to collect still-frame imagery to assess vegetation cover in sagebrush steppe ecosystems. This paper discusses the process for collecting and analyzing imagery from the UAVs to (1) estimate percent cover for six different vegetation types (shrub, dead shrub, grass, forb, litter, and bare ground) and (2) locate sage grouse using representative decoys. The field plots were located on the Idaho National Engineering (INL) site west of Idaho Falls, Idaho, in areas with varying amounts and types of vegetation cover. A software program called SamplePoint was used along with visual inspection to evaluate percent cover for the six cover types. Results were compared against standard field measurements to assess accuracy. The comparison of fixed-wing and helicopter UAV technology against field estimates shows good agreement for the measurement of bare ground. This study shows that if a high degree of detail and data accuracy is desired, then a helicopter UAV may be a good platform to use. If the data collection objective is to assess broad-scale landscape level changes, then the collection of imagery with a fixed-wing system is probably more appropriate.

  8. The touchscreen operant platform for assessing cognitive functions in a rat model of depression.

    Science.gov (United States)

    Tran, Thao Phuong; Christensen, Helle Lyng; Bertelsen, Freja Cecilia Brandt; Bouzinova, Elena; Møller, Arne; Wiborg, Ove

    2016-07-01

    In the present study we assessed alterations in cognitive functions in a chronic mild stress (CMS) rat model of depression. Cognitive functions were assessed in two different tasks applying the translational operant platform touchscreen technology; the visual discrimination/acquisition task was used to assess the ability to perceive and distinguish visual stimuli and to assess associative stimulus-reward learning. The visual discrimination/reversal learning task was used to assess functional brain plasticity or reprogramming of previously acquired stimulus-reward associations. These tasks permit the dissociation of multiple cognitive domains. The CMS model is a validated depression model with the useful feature that rats upon stress exposure show a graduated, individual stress response allowing the segregation of rats into different phenotypes including stress-resilient and anhedonic-like subgroups. Anhedonic-like rats are less likely to acquire the pairwise discrimination task, and they have a slower acquisition rate than controls. In the reversal learning task, resilient rats performed significantly better than anhedonic-like rats over time and 50% passed criterion as opposed to 25% for controls and only 14% for anhedonic-like rats. This indicates that resilient rats have higher cognitive flexibility than anhedonic-like rats. Thus they perform better in learning a novel task, which at the same time potentially implies an increased ability to inhibit previously rewarded behavior. PMID:27083126

  9. GlobAllomeTree: international platform for tree allometric equations to support volume, biomass and carbon assessment

    OpenAIRE

    Henry M; Bombelli A; Trotta C,; Alessandrini A; Birigazzi L; Sola G; Vieilledent G; Santenoise P; Longuetaud F; Valentini R; Picard N; Saint-André L

    2013-01-01

    GlobAllomeTree is an international platform for tree allometric equations. It is the first worldwide web platform designed to facilitate the access of the tree allometric equation and to facilitate the assessment of the tree biometric characteristics for commercial volume, bio-energy or carbon cycling. The webplatform presents a database containing tree allometric equations, a software called Fantallomatrik, to facilitate the comparison and selection of the equations, and documentation to fac...

  10. Product Platform Performance

    DEFF Research Database (Denmark)

    Munk, Lone

    experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform....... These reasons are mentioned in literature, but only the two latter are addressed in platform assessment criteria. Hence a new platform assessment criterion is introduced, the platform user incentive criterion. Alongside with the introduction and recommendation of a platform user incentive criterion...

  11. I want what you've got: Cross platform portabiity and human-robot interaction assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Julie L. Marble, Ph.D.*.; Douglas A. Few; David J. Bruemmer

    2005-08-01

    Human-robot interaction is a subtle, yet critical aspect of design that must be assessed during the development of both the human-robot interface and robot behaviors if the human-robot team is to effectively meet the complexities of the task environment. Testing not only ensures that the system can successfully achieve the tasks for which it was designed, but more importantly, usability testing allows the designers to understand how humans and robots can, will, and should work together to optimize workload distribution. A lack of human-centered robot interface design, the rigidity of sensor configuration, and the platform-specific nature of research robot development environments are a few factors preventing robotic solutions from reaching functional utility in real word environments. Often the difficult engineering challenge of implementing adroit reactive behavior, reliable communication, trustworthy autonomy that combines with system transparency and usable interfaces is overlooked in favor of other research aims. The result is that many robotic systems never reach a level of functional utility necessary even to evaluate the efficacy of the basic system, much less result in a system that can be used in a critical, real-world environment. Further, because control architectures and interfaces are often platform specific, it is difficult or even impossible to make usability comparisons between them. This paper discusses the challenges inherent to the conduct of human factors testing of variable autonomy control architectures and across platforms within a complex, real-world environment. It discusses the need to compare behaviors, architectures, and interfaces within a structured environment that contains challenging real-world tasks, and the implications for system acceptance and trust of autonomous robotic systems for how humans and robots interact in true interactive teams.

  12. Coupled Large Scale Hydro-mechanical Modelling for cap-rock Failure Risk Assessment of CO2 Storage in Deep Saline Aquifers

    International Nuclear Information System (INIS)

    This work presents a numerical strategy of large scale hydro-mechanical simulations to assess the risk of damage in cap-rock formations during a CO2 injection process. The proposed methodology is based on the development of a sequential coupling between a multiphase fluid flow (TOUGH2) and a hydro-mechanical calculation code (Code-Aster) that enables us to perform coupled hydro-mechanical simulation at a regional scale. The likelihood of different cap-rock damage mechanisms can then be evaluated based on the results of the coupled simulations. A scenario based approach is proposed to take into account the effect of the uncertainty of model parameters on damage likelihood. The developed methodology is applied for the cap-rock failure analysis of deep aquifer of the Dogger formation in the context of the Paris basin multilayered geological system as a demonstration example. The simulation is carried out at a regional scale (100 km) considering an industrial mass injection rate of CO2 of 10 Mt/y. The assessment of the stress state after 10 years of injection is conducted through the developed sequential coupling. Two failure mechanisms have been taken into account, namely the tensile fracturing and the shear slip reactivation of pre-existing fractures. To deal with the large uncertainties due to sparse data on the layer formations, a scenario based strategy is undertaken. It consists in defining a first reference modelling scenario considering the mean values of the hydro-mechanical properties for each layer. A sensitivity analysis is then carried out and shows the importance of both the initial stress state and the reservoir hydraulic properties on the cap-rock failure tendency. On this basis, a second scenario denoted 'critical' is defined so that the most influential model parameters are taken in their worst configuration. None of these failure criteria is activated for the considered conditions. At a phenomenological level, this study points out three key aspects

  13. Petroleum resource assessment, Paleozoic successions of the St. Lawrence Platform and Appalachians of eastern Canada

    Energy Technology Data Exchange (ETDEWEB)

    Lavoie, D.; Pinet, N.; Dietrich, J.; Hannigan, P; Castonguay, S.; Hamblin, A.P.; Giles, P.

    2009-07-01

    This paper provided an assessment of the petroleum resource found in the Paleozoic successions of the St. Lawrence Platform and the Appalachians of eastern Canada. The Cambrian-Permian successions in eastern Canada belong to 3 tectonostratigraphic domains, each with its own unique source rock, reservoir units, and trap types. All the basins contain producing or discovered hydrocarbon fields, but their ultimate oil and gas resource potential had not been evaluated recently. In the Palaeozoic strata, 15 conventional petroleum plays and 3 unconventional gas plays have been recognized, but a large number of the conventional and all the unconventional plays cannot be quantitatively assessed. For this reason, the total resource presented in the paper is a minimum potential, as evidence for hydrocarbon charge is compelling in most of the qualitatively assessed plays. The assessment results enhance the understanding of the energy resource endowment of Paleozoic basins in eastern Canada. The large gas potential of Carboniferous basins was found to be much higher than previously estimated. refs., tabs., figs.

  14. Low-frequency noise assessment of border traps in Al2O3 capped DRAM peripheral MOSFETs

    International Nuclear Information System (INIS)

    Low-frequency noise has been used to study the impact of an Al2O3 work-function-engineering cap layer on the gate oxide quality of SiO2/HfO2 DRAM peripheral n- and pMOSFETs. It is shown that from the 1/f-like spectra a border trap density profile can be extracted, which depends on whether the cap is deposited below or above the HfO2 layer. In general, the presence of Al in the high-κ material leads to a higher trap density, with a maximum concentration close to or at the SiO2/HfO2 interface, where a dipole layer is expected to form. When removing the cap layer from the SiO2 interfacial layer, excess generation-recombination-like noise is introduced for the n-channel devices, indicating the presence of dry-etching damage at the SiO2/HfO2 interface. (paper)

  15. Tile-in-ONE: A web platform which integrates Tile Calorimeter data quality and calibration assessment

    CERN Document Server

    Sivolella Gomes, Andressa; The ATLAS collaboration; Maidantchik, Carmen; Solans, Carlos; Burghgrave, Blake; Solodkov, Alexander

    2015-01-01

    The ATLAS Tile Calorimeter assesses the quality of data in order to ensure its proper operation. A number of tasks are then performed by running several tools and systems, which were independently developed to meet distinct collaboration’s requirements and do not necessarily builds an effective connection among them. Thus, a program is usually implemented without a global perspective of the detector, requiring basic software features. In addition, functionalities may overlap in their objectives and frequently replicate resources retrieval mechanisms. Tile-in-ONE is a unique platform that assembles various web systems used by the calorimeter community through a single framework and a standard technology. It provides an infrastructure to support the code implementation, avoiding duplication of work while integrating with an overall view of the detector status. Database connectors smooth the process of information access since developers do not need to be aware of where records are placed and how to extract th...

  16. Satellite altimeter remote sensing of ice caps

    OpenAIRE

    Rinne, Eero Juhani

    2011-01-01

    This thesis investigates the use of satellite altimetry techniques for measuring surface elevation changes of ice caps. Two satellite altimeters, Radar Altimeter 2 (RA-2) and Geoscience Laser Altimeter System (GLAS) are used to assess the surface elevation changes of three Arctic ice caps. This is the first time the RA-2 has been used to assess the elevation changes of ice caps - targets much smaller than the ice sheets which are the instrument’s primary land ice targets. Algor...

  17. The SAMCO Web-platform for resilience assessment in mountainous valleys impacted by landslide risks.

    Science.gov (United States)

    Grandjean, Gilles; Thomas, Loic; Bernardie, Severine

    2016-04-01

    The ANR-SAMCO project aims to develop a proactive resilience framework enhancing the overall resilience of societies on the impacts of mountain risks. The project aims to elaborate methodological tools to characterize and measure ecosystem and societal resilience from an operative perspective on three mountain representative case studies. To achieve this objective, the methodology is split in several points: (1) the definition of the potential impacts of global environmental changes (climate system, ecosystem e.g. land use, socio-economic system) on landslide hazards, (2) the analysis of these consequences in terms of vulnerability (e.g. changes in the location and characteristics of the impacted areas and level of their perturbation) and (3) the implementation of a methodology for quantitatively investigating and mapping indicators of mountain slope vulnerability exposed to several hazard types, and the development of a GIS-based demonstration platform available on the web. The strength and originality of the SAMCO project lies in the combination of different techniques, methodologies and models (multi-hazard assessment, risk evolution in time, vulnerability functional analysis, and governance strategies) that are implemented in a user-oriented web-platform, currently in development. We present the first results of this development task, architecture and functions of the web-tools, the case studies database showing the multi-hazard maps and the stakes at risks. Risk assessment over several area of interest in Alpine or Pyrenean valleys are still in progress, but the first analyses are presented for current and future periods for which climate change and land-use (economical, geographical and social aspects) scenarios are taken into account. This tool, dedicated to stakeholders, should be finally used to evaluate resilience of mountainous regions since multiple scenarios can be tested and compared.

  18. MOSFET assessment of radiation dose delivered to mice using the Small Animal Radiation Research Platform (SARRP).

    Science.gov (United States)

    Ngwa, Wilfred; Korideck, Houari; Chin, Lee M; Makrigiorgos, G Mike; Berbeco, Ross I

    2011-12-01

    The Small Animal Radiation Research Platform (SARRP) is a novel isocentric irradiation system that enables state-of-the-art image-guided radiotherapy research to be performed with animal models. This paper reports the results obtained from investigations assessing the radiation dose delivered by the SARRP to different anatomical target volumes in mice. Surgically implanted metal oxide semiconductor field effect transistors (MOSFET) dosimeters were employed for the dose assessment. The results reveal differences between the calculated and measured dose of -3.5 to 0.5%, -5.2 to -0.7%, -3.9 to 0.5%, -5.9 to 2.5%, -5.5 to 0.5%, and -4.3 to 0% for the left kidney, liver, pancreas, prostate, left lung, and brain, respectively. Overall, the findings show less than 6% difference between the delivered and calculated dose, without tissue heterogeneity corrections. These results provide a useful assessment of the need for tissue heterogeneity corrections in SARRP dose calculations for clinically relevant tumor model sites. PMID:21962005

  19. Climatic mass balance of the ice cap Vestfonna, Svalbard: A spatially distributed assessment using ERA-Interim and MODIS data

    Science.gov (United States)

    MöLler, Marco; Finkelnburg, Roman; Braun, Matthias; Hock, Regine; Jonsell, Ulf; Pohjola, Veijo A.; Scherer, Dieter; Schneider, Christoph

    2011-09-01

    The ice cap Vestfonna in the northern Svalbard archipelago is one of the largest ice bodies of the European Arctic (˜2400 km2), but little is known about its mass balance. We model the climatic mass balance of the ice cap for the period September 2000 to August 2009 on a daily basis. Ablation is calculated by a spatially distributed temperature-radiation-index melt model. Air temperature forcing is provided by ERA-Interim data that is downscaled using data from an automatic weather station operated on the ice cap. Spatially distributed net shortwave radiation fluxes are obtained from standard trigonometric techniques combined with Moderate Resolution Imaging Spectroradiometer-based cloud cover and surface albedo information. Accumulation is derived from ERA-Interim precipitation data that are bias corrected and spatially distributed as a function of elevation. Refreezing is incorporated using the Pmax approach. Results indicate that mass balance years are characterized by short ablation seasons (June to August) and correspondingly longer accumulation periods (September to May). The modeled, annual climatic mass balance rate shows an almost balanced mean of -0.02 ± 0.20 m w.e. yr-1 (meters water equivalent per year) with an associated equilibrium line altitude of 383 ± 54 m above sea level (mean ± one standard deviation). The mean winter balance is +0.32 ± 0.06 m w.e. yr-1, and the mean summer balance -0.35 ± 0.17 m w.e. yr-1. Roughly one fourth of total surface ablation is retained by refreezing indicating that refreezing is an important component of the mass budget of Vestfonna.

  20. The EnerGEO Platform of Integrated Assessment (PIA). Environmental assessment of scenarios as a web service

    International Nuclear Information System (INIS)

    With the International Energy Agency estimating that global energy demand will increase between 40 and 50 percent by 2030 (compared to 2003), scientists and policymakers are concerned about the sustainability of the current energy system and what environmental pressures might result from the development of future energy systems. EnerGEO is an ongoing FP7 Project (2009-2013) which assesses the current and future impact of energy use on the environment by linking environmental observation systems with the processes involved in exploiting energy resources. The idea of this European project is to determine how low carbon scenarios, and in particular scenarios with a high share of renewable electricity, affect emissions of air pollutants and greenhouse gases (GHG) and contribute to mitigation of negative energy system impacts on human health and ecosystems. A Platform of Integrated Assessment (PIA) has been elaborated to provide impact results for a selection of scenarios via a set of models (large-scale energy models, Life Cycle Assessment models,..). This PIA is currently available through a web service. The concept of the PIA is detailed and to illustrate its interest, a set of results is given with the use of the simulation mode of the European version of GAINS for a selection of scenarios. (orig.)

  1. Seismic hazard and risk assessment for large Romanian dams situated in the Moldavian Platform

    Science.gov (United States)

    Moldovan, Iren-Adelina; Popescu, Emilia; Otilia Placinta, Anica; Petruta Constantin, Angela; Toma Danila, Dragos; Borleanu, Felix; Emilian Toader, Victorin; Moldoveanu, Traian

    2016-04-01

    Besides periodical technical inspections, the monitoring and the surveillance of dams' related structures and infrastructures, there are some more seismic specific requirements towards dams' safety. The most important one is the seismic risk assessment that can be accomplished by rating the dams into seismic risk classes using the theory of Bureau and Ballentine (2002), and Bureau (2003), taking into account the maximum expected peak ground motions at the dams site - values obtained using probabilistic hazard assessment approaches (Moldovan et al., 2008), the structures vulnerability and the downstream risk characteristics (human, economical, historic and cultural heritage, etc) in the areas that might be flooded in the case of a dam failure. Probabilistic seismic hazard (PSH), vulnerability and risk studies for dams situated in the Moldavian Platform, starting from Izvorul Muntelui Dam, down on Bistrita and following on Siret River and theirs affluent will be realized. The most vulnerable dams will be studied in detail and flooding maps will be drawn to find the most exposed downstream localities both for risk assessment studies and warnings. GIS maps that clearly indicate areas that are potentially flooded are enough for these studies, thus giving information on the number of inhabitants and goods that may be destroyed. Geospatial servers included topography is sufficient to achieve them, all other further studies are not necessary for downstream risk assessment. The results will consist of local and regional seismic information, dams specific characteristics and locations, seismic hazard maps and risk classes, for all dams sites (for more than 30 dams), inundation maps (for the most vulnerable dams from the region) and possible affected localities. The studies realized in this paper have as final goal to provide the local emergency services with warnings of a potential dam failure and ensuing flood as a result of an large earthquake occurrence, allowing further

  2. Accuracy Assessment of Direct Georeferencing for Photogrammetric Applications on Small Unmanned Aerial Platforms

    Science.gov (United States)

    Mian, O.; Lutes, J.; Lipa, G.; Hutton, J. J.; Gavelle, E.; Borghini, S.

    2016-03-01

    Microdrones md4-1000 quad-rotor VTOL UAV. The Sony A7R and each lens combination were focused and calibrated terrestrially using the Applanix camera calibration facility, and then integrated with the APX-15 GNSS-Inertial system using a custom mount specifically designed for UAV applications. The mount is constructed in such a way as to maintain the stability of both the interior orientation and IMU boresight calibration over shock and vibration, thus turning the Sony A7R into a metric imaging solution. In July and August 2015, Applanix and Avyon carried out a series of test flights of this system. The goal of these test flights was to assess the performance of DMS APX-15 direct georeferencing system under various scenarios. Furthermore, an examination of how DMS APX-15 can be used to produce accurate map products without the use of ground control points and with reduced sidelap was also carried out. Reducing the side lap for survey missions performed by small UAVs can significantly increase the mapping productivity of these platforms. The area mapped during the first flight campaign was a 250m x 300m block and a 775m long railway corridor in a rural setting in Ontario, Canada. The second area mapped was a 450m long corridor over a dam known as Fryer Dam (over Richelieu River in Quebec, Canada). Several ground control points were distributed within both test areas. The flight over the block area included 8 North-South lines and 1 cross strip flown at 80m AGL, resulting in a ~1cm GSD. The flight over the railway corridor included 2 North-South lines also flown at 80m AGL. Similarly, the flight over the dam corridor included 2 North-South lines flown at 50m AGL. The focus of this paper was to analyse the results obtained from the two corridors. Test results from both areas were processed using Direct Georeferencing techniques, and then compared for accuracy against the known positions of ground control points in each test area. The GNSS-Inertial data collected by the APX-15 was

  3. Assessment of undiscovered oil and gas resources in the Cherokee Platform Province area of Kansas, Oklahoma, and Missouri, 2015

    Science.gov (United States)

    Drake II, Ronald M.; Hatch, Joseph R.; Schenk, Christopher J.; Charpentier, Ronald R.; Klett, Timothy R.; Le, Phuong A.; Leathers, Heidi M.; Brownfield, Michael E.; Gaswirth, Stephanie B.; Marra, Kristen R.; Pitman, Janet K.; Potter, Christopher J.; Tennyson, Marilyn E.

    2015-01-01

    Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean volumes of undiscovered, technically recoverable resources of 463 million barrels of oil, 11.2 trillion cubic feet of gas, and 35 million barrels of natural gas liquids in the Cherokee Platform Province area of Kansas, Oklahoma, and Missouri.

  4. Comprehensive risk assessment for rail transportation of dangerous goods: a validated platform for decision support

    International Nuclear Information System (INIS)

    Currently, the most advanced and well documented risk assessments for the transportation of dangerous goods by railway take into account:(i)statistics-based loss of containment frequencies, (ii) specification of potential consequences for a given release situations using event tree methodology as an organisational tool and (iii) consequence calculation models to determine a risk figure known as CCDF (Complementary Cumulative Distribution Function). Such procedures for the risk assessment (including for example decision-making on preventive measures) may offer only a limited insight into the causes and sequences leading to an accident and do not allow for any kind of predictive analysis. The present work introduces an enhanced solution, and a related software platform, which attempts to integrate loss of containment causes and consequences with system's infrastructure and its environment. The solution features:(i)the use of a detailed Master Logical Diagram, including fault/event tree analysis to determine a loss of containment frequency based on different initiating events, scenarios and specific basic data, (ii) the characterization of a resulting source term following a release situation, and (iii) the calculation of various potential impacts on the neighbouring site. Results are wrapped into a CCDF format for each selected traffic segment. The risk-related results are integrated on a software platform, structured as a decision support system using intelligent maps and a variety of GIS (Geographical Information System) data processing procedures. The introduction of the hot spot approach, allows us to focus on the most risk-relevant areas and to use information on various railway infrastructure elements (e.g. points, tunnels), are the basis of the new models employed. The software is applicable to any railway transportation system, comprising its technical infrastructure, rolling stock, human actions, regulation and management procedures. It provides the

  5. An integrated telemedicine platform for the assessment of affective physiological states

    Directory of Open Access Journals (Sweden)

    Ganiatsas George

    2006-08-01

    Full Text Available Abstract AUBADE is an integrated platform built for the affective assessment of individuals. The system performs evaluation of the emotional state by classifying vectors of features extracted from: facial Electromyogram, Respiration, Electrodermal Activity and Electrocardiogram. The AUBADE system consists of: (a a multisensorial wearable, (b a data acquisition and wireless communication module, (c a feature extraction module, (d a 3D facial animation module which is used for the projection of the obtained data through a generic 3D face model; whereas the end-user will be able to view the facial expression of the subject in real time, (e an intelligent emotion recognition module, and (f the AUBADE databases where the acquired signals along with the subject's animation videos are saved. The system is designed to be applied to human subjects operating under extreme stress conditions, in particular car racing drivers, and also to patients suffering from neurological and psychological disorders. AUBADE's classification accuracy into five predefined emotional classes (high stress, low stress, disappointment, euphoria and neutral face is 86.0%. The pilot system applications and components are being tested and evaluated on Maserati's car. racing drivers.

  6. Development of a Micro-UAV Hyperspectral Imaging Platform for Assessing Hydrogeological Hazards

    Science.gov (United States)

    Chen, Z.; Alabsi, M.

    2015-12-01

    The exacerbating global weather changes have cast significant impacts upon the proportion of water supplied to agriculture. Therefore, one of the 21stCentury Grant Challenges faced by global population is securing water for food. However, the soil-water behavior in an agricultural environment is complex; among others, one of the key properties we recognize is water repellence or hydrophobicity, which affects many hydrogeological and hazardous conditions such as excessive water infiltration, runoff, and soil erosion. Under a US-Israel research program funded by USDA and BARD at Israel, we have proposed the development of a novel micro-unmanned aerial vehicle (micro-UAV or drone) based hyperspectral imaging platform for identifying and assessing soil repellence at low altitudes with enhanced flexibility, much reduced cost, and ultimately easy use. This aerial imaging system consists of a generic micro-UAV, hyperspectral sensor aided by GPS/IMU, on-board computing units, and a ground station. The target benefits of this system include: (1) programmable waypoint navigation and robotic control for multi-view imaging; (2) ability of two- or three-dimensional scene reconstruction for complex terrains; and (3) fusion with other sensors to realize real-time diagnosis (e.g., humidity and solar irradiation that may affect soil-water sensing). In this talk we present our methodology and processes in integration of hyperspectral imaging, on-board sensing and computing, hyperspectral data modeling, and preliminary field demonstration and verification of the developed prototype.

  7. GeoProMT: A Collaborative Platform Supporting Natural Hazards Project Management From Assessment to Resilience

    Science.gov (United States)

    Renschler, C.; Sheridan, M. F.; Patra, A. K.

    2008-05-01

    The impact and consequences of extreme geophysical events (hurricanes, floods, wildfires, volcanic flows, mudflows, etc.) on properties and processes should be continuously assessed by a well-coordinated interdisciplinary research and outreach approach addressing risk assessment and resilience. Communication between various involved disciplines and stakeholders is the key to a successful implementation of an integrated risk management plan. These issues become apparent at the level of decision support tools for extreme events/disaster management in natural and managed environments. The Geospatial Project Management Tool (GeoProMT) is a collaborative platform for research and training to document and communicate the fundamental steps in transforming information for extreme events at various scales for analysis and management. GeoProMT is an internet-based interface for the management of shared geo-spatial and multi-temporal information such as measurements, remotely sensed images, and other GIS data. This tool enhances collaborative research activities and the ability to assimilate data from diverse sources by integrating information management. This facilitates a better understanding of natural processes and enhances the integrated assessment of resilience against both the slow and fast onset of hazard risks. Fundamental to understanding and communicating complex natural processes are: (a) representation of spatiotemporal variability, extremes, and uncertainty of environmental properties and processes in the digital domain, (b) transformation of their spatiotemporal representation across scales (e.g. interpolation, aggregation, disaggregation.) during data processing and modeling in the digital domain, and designing and developing tools for (c) geo-spatial data management, and (d) geo-spatial process modeling and effective implementation, and (e) supporting decision- and policy-making in natural resources and hazard management at various spatial and temporal scales

  8. Cancer risk assessment for Tehran research reactor and radioisotope laboratory with CAP88-PC code (Gaussian plume model)

    International Nuclear Information System (INIS)

    Research highlights: → Impact of Tehran's reactor and radioisotope laboratory stacks has been studied. → Gaussian Plume Dispersion Model and laboratory analyses were used. → Glass-fiber filters were used in the exclusion area in different direction. → The released radionuclide concentration was calculated by the code and measurements. → Dose calculations best compared to procedures presented in the Regulatory Guide. - Abstract: The amount of released radionuclide from Tehran's research reactor and radioisotope laboratory stacks and their impact have been studied. The aim of this work is to determine the amount and type of radioactive materials and to estimate their risk once they are released into the environment. To perform the above two tasks, CAP88-PC computer code which simulates Gaussian dispersion air transport Plume Model and laboratory analysis of air samples around the site were used. Computer code input data are provided by the Safety Analysis Report and Reactor Annual Reports. Air samples were collected using the filter and sampling pumps and analyzed by gamma spectroscopy counter. Results of computer program showed that the risk of cancer death (lifetime risk) is below the regulatory limit. Results of analysis of available radionuclide in the air samples also showed that concentrations are close to the background and confirm the code results.

  9. Towards Supporting Climate Scientists and Impact Assessment Analysts with the Big Data Europe Platform

    Science.gov (United States)

    Klampanos, Iraklis; Vlachogiannis, Diamando; Andronopoulos, Spyros; Cofiño, Antonio; Charalambidis, Angelos; Lokers, Rob; Konstantopoulos, Stasinos; Karkaletsis, Vangelis

    2016-04-01

    The EU, Horizon 2020, project Big Data Europe (BDE) aims to support European companies and institutions in effectively managing and making use of big data in activities critical to their progress and success. BDE focuses on seven areas of societal impact: Health, Food and Agriculture, Energy, Transport, Climate, Social Sciences and Security. By reaching out to partners and stakeholders, BDE aims to elicit data-intensive requirements for, and deliver an ICT platform to cover aspects of publishing and consuming semantically interoperable, large-scale, multi-lingual data assets and knowledge. In this presentation we will describe the first BDE pilot for Climate, focusing on SemaGrow, its core component, which provides data querying and management based on data semantics. Over the last few decades, extended scientific effort in understanding climate change has resulted in a huge volume of model and observational data. Large international global and regional model inter-comparison projects have focused on creating a framework in support of climate model diagnosis, validation, documentation and data access. The application of climate model ensembles, a system consisting of different possible realisations of a climate model, has further significantly increased the amount of climate and weather data generated. The provision of such models satisfies the crucial objective of assessing potential impacts of climate change on well-being for adaptation, prevention and mitigation. One of the methodologies applied by the climate research and impact assessment communities is that of dynamical downscaling. This calculates values of atmospheric variables in smaller spatial and temporal scales, given a global model. On the company or institution level, this process can be greatly improved in terms of querying, data ingestion from various sources and formats, automatic data mapping, etc. The first Climate BDE pilot will facilitate the process of dynamical downscaling by providing a

  10. Assessment of the Effectiveness of Internet-Based Distance Learning through the VClass e-Education Platform

    OpenAIRE

    Chadchadaporn Pukkaew

    2013-01-01

    This study assesses the effectiveness of internet-based distance learning (IBDL) through the VClass live e-education platform. The research examines (1) the effectiveness of IBDL for regular and distance students and (2) the distance students’ experience of VClass in the IBDL course entitled Computer Programming 1. The study employed the common definitions of evaluation to attain useful statistical results. The measurement instruments used were test scores and questionnaires. The sample consi...

  11. Technology assessment for an integrated PC-based platform for three telemedicine applications

    Science.gov (United States)

    Tohme, Walid G.; Hayes, Wendelin S.; Dai, Hailei L.; Komo, Darmadi; Pahira, John J.; Abernethy, Darrell R.; Rennert, Wolfgang; Kuehl, Karen S.; Hauser, Gabriel J.; Mun, Seong K.

    1996-05-01

    This paper investigates the design and technical efficacy of an integrated PC based platform for three different medical applications. The technical efficacy of such a telemedicine platform has not been evaluated in the literature and optimal technical requirements have not been developed. The first application, with the Department of Surgery, Division of Urology, tests the utility of a telemedicine platform including radiology images for a surgical stone disease consultation service from an off site location in West Virginia. The second application, with the Department of Internal Medicine, Division of Clinical Pharmacology, investigates the usefulness of telemedicine when used for a clinical pharmacology consultation service from an off-site location. The third application, with the Department of Pediatrics, will test telemedicine for trauma care triage service first within an off-site location in Virginia and then from there to Georgetown University Medical Center.

  12. Assessment of the real-time PCR and different digital PCR platforms for DNA quantification

    OpenAIRE

    Pavšič, Jernej; Žel, Jana; Milavec, Mojca

    2015-01-01

    Digital PCR (dPCR) is beginning to supersede real-time PCR (qPCR) for quantification of nucleic acids in many different applications. Several analytical properties of the two most commonly used dPCR platforms, namely the QX100 system (Bio-Rad) and the 12.765 array of the Biomark system (Fluidigm), have already been evaluated and compared with those of qPCR. However, to the best of our knowledge, direct comparison between the three of these platforms using the same DNA material has not been do...

  13. Evaporites on Ice: Experimental Assessment of Evaporites Formation on Antarctica (and on Martian North Polar Residual Cap)

    Science.gov (United States)

    Losiak, Anna; Derkowski, Arkadiusz; Skala, Aleksander; Trzcinski, Jerzy

    2016-04-01

    Evaporites are highly water soluble minerals, formed as a result of the evaporation or freezing of bodies of water. They are common weathering minerals found on rocks (including meteorites) on Antarctic ice sheet [1,2,3,4]. The water necessary for the reaction is produced by melting of ice below the dark-colored meteorites which can heat up to a few degrees above 0 °C due to insolation heating during wind-free summer days [5,6]. The Martian North Polar Residual Cap is surrounded by a young [7] dune field that is rich in evaporitic mineral: gypsum [8]. Its existence implies that relatively recently in the Martian history (in late Amazonian, when surface conditions were comparable to the current ones) there was a significant amount of liquid water present on the Mars surface. One of the proposed solutions to this problem is that gypsum is formed by weathering on/in ice [9,10,11,12,13], similarly to the process occurring on the Antarctic ice sheet. Recently, Losiak et al. 2015 showed that that during the warmest days of the Martian summer, solar irradiation may be sufficient to melt pure water ice located below a layer of dark dust particles lying on the steepest sections of the equator-facing slopes of the spiral troughs within Martian NPRC. Under the current irradiation conditions, melting is possible in very restricted areas of the NPRC and it lasts for up to couple of hours, but during the times of high irradiance at the north pole [15] this process could have been much more pronounced. Liquid water can be metastable at the NPRC because the pressure during the summer season is ~760-650 Pa [16] which is above the triple point of water. The rate of free-surface "clean" liquid water evaporation under average Martian conditions determined experimentally by [17] is comparable to the rate of melting determined by [21] (if there is no wind at the surface). In the current study we attempt to determine experimentally how many melting-freezing cycles are required to form

  14. Hybrid causal methodology and software platform for probabilistic risk assessment and safety monitoring of socio-technical systems

    International Nuclear Information System (INIS)

    This paper introduces an integrated framework and software platform for probabilistic risk assessment (PRA) and safety monitoring of complex socio-technical systems. An overview of the three-layer hybrid causal logic (HCL) modeling approach and corresponding algorithms, implemented in the Trilith software platform, are provided. The HCL approach enhances typical PRA methods by quantitatively including the influence of soft causal factors introduced by human and organizational aspects of a system. The framework allows different modeling techniques to be used for different aspects of the socio-technical system. The HCL approach combines the power of traditional event sequence diagram (ESD)event tree (ET) and fault tree (FT) techniques for modeling deterministic causal paths, with the flexibility of Bayesian belief networks for modeling non-deterministic cause-effect relationships among system elements (suitable for modeling human and organizational influences). Trilith enables analysts to construct HCL models and perform quantitative risk assessment and management of complex systems. The risk management capabilities included are HCL-based risk importance measures, hazard identification and ranking, precursor analysis, safety indicator monitoring, and root cause analysis. This paper describes the capabilities of the Trilith platform and power of the HCL algorithm by use of example risk models for a type of aviation accident (aircraft taking off from the wrong runway).

  15. Social impact assessment: identification, management and follow-up of community concerns associated with construction of the Hibernia offshore platform

    International Nuclear Information System (INIS)

    Social impact Assessment (SIA) is the systematic analysis, in advance of the likely impacts of a proposed action, that considers 'all social and cultural consequences to human populations of any public or private actions that alter the ways in which people live, work, play, relate to one another, organize to meet their needs, and generally cope as members of society' (US Department of Commerce 1994). Through the SIA for the construction of the Hibernia offshore oil platform concern, and values of local area residents were identified and a management strategy designed to minimise social disruption associated with the project. Monitoring studies showed that the strategy was effective and that few negative social impacts occurred. The Hibernia offshore oil field, was discovered on the Grand Banks, east of the island of Newfoundland, in 1979. The distance from shore (315 km), its isolation, the periodic presence of sea ice, icebergs and fog, and frequently severe wave and wind conditions, make these waters an extremely hostile work environment. Primarily to maximize human safety, the final engineering design chosen for the project was a fixed, gravity base system (GBS). The platform functions as the main drilling and production unit, the first stage processing facility, oil storage and accommodations base for the offshore crews. The concrete base of the platform, one of the five super-modules that make up the top-sides of the platform and eight of tile smaller top-sides-mounted modules, were fabricated in Newfoundland and the entire platform assembled at Bull Arm, Trinity Bay. (author)

  16. Construction of the Chinese Veteran Clinical Research (CVCR) Platform for the assessment of non-communicable diseases

    Institute of Scientific and Technical Information of China (English)

    Tan Jiping; Li Nan; Gao Jing; Guo Yuhe; Hu Wei; Yang Jinsheng; Yu Baocheng

    2014-01-01

    Background Based on the excellent medical care and management system for Chinese veterans,as well as the detailed medical documentation available,we aim to construct a Chinese Veteran Clinical Research (CVCR) platform on noncommunicable diseases (NCDs) and carry out studies of the primary disabling NCDs.Methods The Geriatric Neurology Department of Chinese People's Liberation Army General Hospital and veterans' hospitals serve as the leading and participating units in the platform construction.The fundamental constituents of the platform are veteran communities.Stratified typical cluster sampling is adopted to recruit veteran communities.A cross-sectional study of mental,neurological,and substance use (MNS) disorders are performed in two stages using screening scale such as the Mini-Mental State Examination and Montreal cognitive assessment,followed by systematic neuropsychological assessments to make clinical diagnoses,evaluated disease awareness and care situation.Results A total of 9 676 among 277 veteran communities from 18 cities are recruited into this platform,yielding a response rate of 83.86%.8 812 subjects complete the MNS subproject screening and total response rate is 91.70%.The average participant age is (82.01±4.61) years,69.47% of veterans are 80 years or older.Most participants are male (94.01%),83.36% of subjects have at least a junior high school degree.The overall health status of veterans is good and stable.The most common NCD are cardiovascular disorders (86.44%),urinary and genital diseases (73.14%),eye and ear problems (66.25%),endocrine (56.56%) and neuro-psychiatric disturbances (50.78%).Conclusion We first construct a veterans' comprehensive clinical research platform for the study of NCDs that is primarily composed of highly educated Chinese males of advanced age and utilize this platform to complete a cross-sectional national investigation of MNS disorders among veterans.The good and stable health condition of the

  17. Microtubule's conformational cap

    DEFF Research Database (Denmark)

    Chretien, D.; Janosi, I.; Taveau, J.C.;

    1999-01-01

    The molecular mechanisms that allow elongation of the unstable microtubule lattice remain unclear. It is usually thought that the GDP-liganded tubulin lattice is capped by a small layer of GTP- or GDP-P(i)-liganded molecules, the so called "GTP-cap". Here, we point-out that the elastic properties...

  18. GPS/CAPS dual-mode software receiver

    Institute of Scientific and Technical Information of China (English)

    NING ChunLin; SHI HuLi; HU Chao

    2009-01-01

    The positioning of the GPS or Chinese Area Positioning System (CAPS) software receiver was developed on a software receiver platform.The structure of the GPSlCAPS dual-mode software receiver was put forward after analyzing the differences in the satellite identification,ranging code,spread spectrum,coordinate system,time system,carrier band,and navigation data between GPS and CAPS.Based on Matlab software on a personal computer,baseband signal processing and positioning procedures were completed using real GPS and CAPS radio frequency signals received by two antennas.Three kinds of experiments including GPS positioning,CAPS positioning,and GPS/CAPS positioning were carried out.Stability and precision of the results were analyzed and compared.The experimental results show that the precision of CAPS is similar to that of GPS,while the positioning precision of the GPS/CAPS dual-mode software receiver is 1-2 m higher than that of CAPS or GPS.The smallest average variance of the positioning can be obtained by using the GPS/CAPS dual-mode software receiver.

  19. GPS/CAPS dual-mode software receiver

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The positioning of the GPS or Chinese Area Positioning System (CAPS) software receiver was developed on a software receiver platform. The structure of the GPS/CAPS dual-mode software receiver was put forward after analyzing the differences in the satellite identification, ranging code, spread spectrum, coordinate system, time system, carrier band, and navigation data between GPS and CAPS. Based on Matlab software on a personal computer, baseband signal processing and positioning procedures were completed using real GPS and CAPS radio frequency signals received by two antennas. Three kinds of experiments including GPS positioning, CAPS positioning, and GPS/CAPS positioning were carried out. Stability and precision of the results were analyzed and compared. The experimental results show that the precision of CAPS is similar to that of GPS, while the positioning precision of the GPS/CAPS dual-mode software receiver is 1-2 m higher than that of CAPS or GPS. The smallest average variance of the positioning can be obtained by using the GPS/CAPS dual-mode software receiver.

  20. Wearable textile platform for assessing stroke patient treatment in daily life conditions

    Directory of Open Access Journals (Sweden)

    Federico eLorussi

    2016-03-01

    Full Text Available Monitoring physical activities during post-stroke rehabilitation in daily life may help physicians to optimize and tailor the training program for patients. The European research project INTERACTION (FP7-ICT-2011-7-287351 evaluated motor capabilities in stroke patients during the recovery treatment period. We developed wearable sensing platform based on the sensor fusion among inertial, knitted piezoresistive sensors and textile EMG electrodes . The device was conceived in modular form and consists of a separate shirt, trousers, glove and shoe. Thanks to the novel fusion approach it has been possible to develop a model for the shoulder taking into account the scapulo-thoracic joint of the scapular girdle, considerably improving the estimation of the hand position in reaching activities. In order to minimize the sensor set used to monitor gait, a single inertial sensor fused with a textile goniometer proved to reconstruct the orientation of all the body segments of the leg. Finally, the sensing glove, endowed with three textile goniometers and three force sensors showed good capabilities in the reconstruction of grasping activities and evaluating the interaction of the hand with the environment, according to the project specifications. This paper reports on the design and the technical evaluation of the performance of the sensing platform, tested on healthy subjects.

  1. Wearable Textile Platform for Assessing Stroke Patient Treatment in Daily Life Conditions.

    Science.gov (United States)

    Lorussi, Federico; Carbonaro, Nicola; De Rossi, Danilo; Paradiso, Rita; Veltink, Peter; Tognetti, Alessandro

    2016-01-01

    Monitoring physical activities during post-stroke rehabilitation in daily life may help physicians to optimize and tailor the training program for patients. The European research project INTERACTION (FP7-ICT-2011-7-287351) evaluated motor capabilities in stroke patients during the recovery treatment period. We developed wearable sensing platform based on the sensor fusion among inertial, knitted piezoresistive sensors and textile EMG electrodes. The device was conceived in modular form and consists of a separate shirt, trousers, glove, and shoe. Thanks to the novel fusion approach it has been possible to develop a model for the shoulder taking into account the scapulo-thoracic joint of the scapular girdle, considerably improving the estimation of the hand position in reaching activities. In order to minimize the sensor set used to monitor gait, a single inertial sensor fused with a textile goniometer proved to reconstruct the orientation of all the body segments of the leg. Finally, the sensing glove, endowed with three textile goniometers and three force sensors showed good capabilities in the reconstruction of grasping activities and evaluating the interaction of the hand with the environment, according to the project specifications. This paper reports on the design and the technical evaluation of the performance of the sensing platform, tested on healthy subjects. PMID:27047939

  2. Multiple platform assessment of the EGF dependent transcriptome by microarray and deep tag sequencing analysis

    Directory of Open Access Journals (Sweden)

    Iraola Susana

    2011-06-01

    Full Text Available Abstract Background Epidermal Growth Factor (EGF is a key regulatory growth factor activating many processes relevant to normal development and disease, affecting cell proliferation and survival. Here we use a combined approach to study the EGF dependent transcriptome of HeLa cells by using multiple long oligonucleotide based microarray platforms (from Agilent, Operon, and Illumina in combination with digital gene expression profiling (DGE with the Illumina Genome Analyzer. Results By applying a procedure for cross-platform data meta-analysis based on RankProd and GlobalAncova tests, we establish a well validated gene set with transcript levels altered after EGF treatment. We use this robust gene list to build higher order networks of gene interaction by interconnecting associated networks, supporting and extending the important role of the EGF signaling pathway in cancer. In addition, we find an entirely new set of genes previously unrelated to the currently accepted EGF associated cellular functions. Conclusions We propose that the use of global genomic cross-validation derived from high content technologies (microarrays or deep sequencing can be used to generate more reliable datasets. This approach should help to improve the confidence of downstream in silico functional inference analyses based on high content data.

  3. UNDERSTANDING FARMERS’ RESPONSES TO CAP REFORM

    OpenAIRE

    Menozzi, Davide; Fioravanzi, Martina; Donati, Michele

    2014-01-01

    The 2014-2020 Common Agricultural Policy (CAP) reform defines new rules for farmers including regionalization, crop diversification and ecological focus area (EFA). This paper aims to evaluate farmers’ intention to modify their behaviour because of the CAP reform, using the Theory of Planned Behaviour (TPB). A questionnaire was submitted to 71 Italian durum wheat producers assessing their intention to change durum wheat surface and to maintain as EFA part of the arable land. Subjective norms ...

  4. The Tox21 robotic platform for the assessment of environmental chemicals--from vision to reality.

    Science.gov (United States)

    Attene-Ramos, Matias S; Miller, Nicole; Huang, Ruili; Michael, Sam; Itkin, Misha; Kavlock, Robert J; Austin, Christopher P; Shinn, Paul; Simeonov, Anton; Tice, Raymond R; Xia, Menghang

    2013-08-01

    Since its establishment in 2008, the US Tox21 inter-agency collaboration has made great progress in developing and evaluating cellular models for the evaluation of environmental chemicals as a proof of principle. Currently, the program has entered its production phase (Tox21 Phase II) focusing initially on the areas of modulation of nuclear receptors and stress response pathways. During Tox21 Phase II, the set of chemicals to be tested has been expanded to nearly 10,000 (10K) compounds and a fully automated screening platform has been implemented. The Tox21 robotic system combined with informatics efforts is capable of screening and profiling the collection of 10K environmental chemicals in triplicate in a week. In this article, we describe the Tox21 screening process, compound library preparation, data processing, and robotic system validation. PMID:23732176

  5. Inter-laboratory evaluation of instrument platforms and experimental workflows for quantitative accuracy and reproducibility assessment

    Directory of Open Access Journals (Sweden)

    Andrew J. Percy

    2015-09-01

    Full Text Available The reproducibility of plasma protein quantitation between laboratories and between instrument types was examined in a large-scale international study involving 16 laboratories and 19 LC–MS/MS platforms, using two kits designed to evaluate instrument performance and one kit designed to evaluate the entire bottom-up workflow. There was little effect of instrument type on the quality of the results, demonstrating the robustness of LC/MRM-MS with isotopically labeled standards. Technician skill was a factor, as errors in sample preparation and sub-optimal LC–MS performance were evident. This highlights the importance of proper training and routine quality control before quantitation is done on patient samples.

  6. A novel testing platform for assessing knee joint mechanics: a parallel robotic system combined with an instrumented spatial linkage.

    Science.gov (United States)

    Atarod, Mohammad; Rosvold, Joshua M; Frank, Cyril B; Shrive, Nigel G

    2014-05-01

    Assessing joint function following trauma and its inter-relation with degenerative changes requires an understanding of the normal state of structural loading in the joint. Very few studies have attempted to reproduce joint specific in vivo motions in vitro to quantify the actual loads carried by different tissues within the knee joint. The most significant challenge in this area is the very high sensitivity of the loads in joint structures to motion reproduction accuracy. A novel testing platform for assessing knee joint mechanics is described, comprised of a highly accurate (0.3 ± 0.1 mm, 0.3 ± 0.1°) six-degree-of-freedom (6-DOF) instrumented spatial linkage (ISL) for in vivo joint kinematic assessments and a unique 6-DOF parallel robotic manipulator. A position feedback system (ISL and position controller) is used for accurate reproduction of in vivo joint motions and estimation of "in situ" joint/tissue loads. The parallel robotic manipulator provides excellent stiffness and repeatability in reproducing physiological motions in 6-DOF, compared to the commonly used serial robots. The position feedback system provides real-time feedback data to the robot to reproduce in vivo motions and significantly enhances motion reproduction accuracy by adjusting for robot end-effector movements. Using this combined robot-ISL system, in vivo motions can be reproduced in vitro with very high accuracy (0.1 mm, 0.1°). Our results indicate that this level of accuracy is essential for meaningful estimation of tissue loads during gait. Using this novel testing platform, we have determined the normal load-carrying characteristics of different tissues within the ovine knee joint. The application of this testing system will continue to increase our understanding of normal and pathological joint states. PMID:24519725

  7. GlobAllomeTree: international platform for tree allometric equations to support volume, biomass and carbon assessment

    Directory of Open Access Journals (Sweden)

    Henry M

    2013-07-01

    Full Text Available GlobAllomeTree is an international platform for tree allometric equations. It is the first worldwide web platform designed to facilitate the access of the tree allometric equation and to facilitate the assessment of the tree biometric characteristics for commercial volume, bio-energy or carbon cycling. The webplatform presents a database containing tree allometric equations, a software called Fantallomatrik, to facilitate the comparison and selection of the equations, and documentation to facilitate the development of new tree allometric models, improve the evaluation of tree and forest resources and improve knowledge on tree allometric equations. In the Fantallometrik software, equations can be selected by country, ecological zones, input parameters, tree species, statistic parameters and outputs. The continuously updated database currently contains over 5000 tree allometric equations classified according to 73 fields. The software Fantallometrik can be also used to compare equations, insert new data and estimate the selected output variables using field inventory. The GlobAllomeTree products are freely available at the URL: http://globallometree.org for a range of users including foresters, project developers, scientist, student and government staff.

  8. CENTRIFUGE END CAP

    Science.gov (United States)

    Beams, J.W.; Snoddy, L.B.

    1960-08-01

    An end cap for ultra-gas centrifuges is designed to impart or remove angular momentum to or from the gas and to bring the entering gas to the temperature of the gas inside the centrifuge. The end cap is provided with slots or fins for adjusting the temperature and the angular momentum of the entering gas to the temperature and momentum of the gas in the centrifuge and is constructed to introduce both the inner and the peripheral stream into the centrifuge.

  9. Fish survey, fishing duration, shellfish resource assessment, and other data from the COMMANDO and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 21 May 1976 to 16 September 1976 (NODC Accession 7700432)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish survey, fishing duration, shellfish resource assessment, and other data were collected from the COMMANDO and other platforms from 21 May 1976 to 16 September...

  10. The first Inner Detector End-Cap is lowered into the cavern

    CERN Multimedia

    Heinz Pernegger

    The first Inner Detector End-Cap, containing both the SCT and TRT detectors, arriving down the access shaft on the A-side. . The Inner Detector End-Cap A approaching the installation platform. During the difficult phase of inserting the Inner Detector into the cryostat. On Thursday, May 24, the first Inner Detector end-cap, with both the TRT and SCT end-caps, was taken down to the pit. More pictures can be found on the transfer from SR1 to SX1 as well as the lowering into the cavern and reception on the platform which can also be seen as a slide show

  11. Human health impacts for renewable energy scenarios from the EnerGEO Platform of Integrated Assessment (PIA)

    International Nuclear Information System (INIS)

    This article reports impact results from running the EnerGEO Platform of Integrated Assessment (PIA) related to human health for different scenarios in Europe. The scenarios were prepared within the EnerGEO project. The idea of this European project is to determine how low carbon scenarios, and in particular scenarios with a high share of renewable energy, affect concentrations of air pollutants and as a consequence affect human health. PM2.5 concentrations were estimated with the IIASA Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) model on a time horizon up to the year 2050 for different scenarios. We analyse here the estimation of the Loss of Life Expectancy due to PM2.5 concentrations for the Baseline scenario taken as a reference and the Maximum renewable power scenario. (orig.)

  12. DEVELOPMENT OF AN INSPECTION PLATFORM AND A SUITE OF SENSORS FOR ASSESSING CORROSION AND MECHANICAL DAMAGE ON UNPIGGABLE TRANSMISSION MAINS

    Energy Technology Data Exchange (ETDEWEB)

    George C. Vradis

    2003-05-01

    The present report summarizes the accomplishments of the project during its second three-month period (from January 2003 through March 2003). The project was initiated with delay in February 2003 due to contractual issues that emerged between the NGA and Foster-Miller, Inc. The two organizations are working diligently to maintain the program's pace so that it is completed in time. The efforts of the project focused during this period in the assessment of the tether technology that is intended to be used as the means of communication between robot and operator. Preliminary results indicate that tether is a viable option under certain pipeline operating conditions but not all. The exact range of operating conditions that are viable for tether use are being determined as the study progresses. Work was also initiated regarding the design of the robotic platform.

  13. Design and Performance Assessment of a Conceptual Cover Cap of Near Surface Repository for Short Lived Low and Intermediate Level Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    Asaba, Ruth; Kim, Changlak [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-05-15

    The safety of the overall waste disposal system is determined by the performance of its individual components: waste form, waste container, engineered barrier and the host environment. The design of the cover cap helps in preventing percolation of water, and in retarding radionuclide migration from the disposal facility to the biosphere. The cover of a disposal facility is usually a combination of materials such as sand, gravel, concrete, clay and soil conditioned for vegetation growth. The cover system will be designed using models such as EPA's Hydrological Evaluation of Land fill Performance (HELP) code. This paper describes a conceptual design for a cover cap for a land fill as a preferred disposal facility for low and short lived intermediate radioactive waste in Uganda. Majority of the waste is generated from disused sealed and unsealed radioactive sources arising from medical, industrial applications, and research. Radioactive waste management has raised a lot of concern in both developed and developing countries. Each country has a responsibility to come up with a solution to prevent contamination of the environment and humans from radioactive waste. It is important to have thicker soil layers in cap designs so as to support vegetation growth since some activities such as erosion and settlements are expected. Help simulations in this study will assist to demonstrate that it is possible to design a cover cap which can contain radioactive waste packages for hundreds of years provided the proper institutional and performance monitoring schemes are implemented.

  14. Assessment of cisplatin-induced kidney injury using an integrated rodent platform

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yafei [Global Safety Assessment, AstraZeneca R and D Waltham, MA 02451 (United States); Brott, David [Patient Safety, AstraZeneca R and D Wilmington, DE 19850 (United States); Luo, Wenli [Discovery Statistics, AstraZeneca R and D Waltham, MA 02451 (United States); Gangl, Eric [DMPK, AstraZeneca R and D Waltham, MA 02451 (United States); Kamendi, Harriet; Barthlow, Herbert; Lengel, David; Fikes, James; Kinter, Lewis [Global Safety Assessment, AstraZeneca R and D Waltham, MA 02451 (United States); Valentin, Jean-Pierre [Global Safety Assessment, AstraZeneca R and D Alderley Park, Macclesfield, SK10 4TG (United Kingdom); Bialecki, Russell, E-mail: russell.bialecki@astrazeneca.com [Global Safety Assessment, AstraZeneca R and D Waltham, MA 02451 (United States)

    2013-05-01

    Current diagnosis of drug-induced kidney injury (DIKI) primarily relies on detection of elevated plasma creatinine (Cr) or blood urea nitrogen (BUN) levels; however, both are indices of overall kidney function and changes are delayed with respect to onset of nephron injury. Our aim was to investigate whether early changes in new urinary DIKI biomarkers predict plasma Cr, BUN, renal hemodynamic and kidney morphological changes associated with kidney injury following a single dose of cisplatin (CDDP) using an integrated platform in rodent. Conscious surgically prepared male Han Wistar rats were given a single intraperitoneal dose of CDDP (15 mg/kg). Glomerular filtration rate (GFR), effective renal plasma flow (ERPF), urinalysis, DIKI biomarkers, CDDP pharmacokinetics, blood pressures, heart rate, body temperature and electroencephalogram (EEG) were measured in the same vehicle- or CDDP-treated animals over 72 h. Plasma chemistry (including Cr and BUN) and renal tissues were examined at study termination. Cisplatin caused progressive reductions of GFR, ERPF, heart rate and body temperature from day 1 (0–24 h). DIKI biomarkers including alpha-glutathione S-transferase (α-GST) significantly increased as early as 6 h post-dose, which preceded significant declines of GFR and ERPF (24 h), increased plasma Cr and BUN (72 h), and associated with renal acute tubular necrosis at 72 h post-dose. The present study adds to the current understanding of CDDP action by demonstrating that early increases in urinary excretion of α-GST predict DIKI risk following acute exposure to CDDP in rats, before changes in traditional DIKI markers are evident. - Highlights: ► CDDP causes direct damage to kidneys without affecting EEG or CVS function. ► α-GST and albumin detect DIKI earlier when compared with traditional indices. ► Integrated “cardiovascular-EEG-renal” model to better understand DIKI mechanisms ► Promotes 3R's principles in drug discovery and development.

  15. Assessment of cisplatin-induced kidney injury using an integrated rodent platform

    International Nuclear Information System (INIS)

    Current diagnosis of drug-induced kidney injury (DIKI) primarily relies on detection of elevated plasma creatinine (Cr) or blood urea nitrogen (BUN) levels; however, both are indices of overall kidney function and changes are delayed with respect to onset of nephron injury. Our aim was to investigate whether early changes in new urinary DIKI biomarkers predict plasma Cr, BUN, renal hemodynamic and kidney morphological changes associated with kidney injury following a single dose of cisplatin (CDDP) using an integrated platform in rodent. Conscious surgically prepared male Han Wistar rats were given a single intraperitoneal dose of CDDP (15 mg/kg). Glomerular filtration rate (GFR), effective renal plasma flow (ERPF), urinalysis, DIKI biomarkers, CDDP pharmacokinetics, blood pressures, heart rate, body temperature and electroencephalogram (EEG) were measured in the same vehicle- or CDDP-treated animals over 72 h. Plasma chemistry (including Cr and BUN) and renal tissues were examined at study termination. Cisplatin caused progressive reductions of GFR, ERPF, heart rate and body temperature from day 1 (0–24 h). DIKI biomarkers including alpha-glutathione S-transferase (α-GST) significantly increased as early as 6 h post-dose, which preceded significant declines of GFR and ERPF (24 h), increased plasma Cr and BUN (72 h), and associated with renal acute tubular necrosis at 72 h post-dose. The present study adds to the current understanding of CDDP action by demonstrating that early increases in urinary excretion of α-GST predict DIKI risk following acute exposure to CDDP in rats, before changes in traditional DIKI markers are evident. - Highlights: ► CDDP causes direct damage to kidneys without affecting EEG or CVS function. ► α-GST and albumin detect DIKI earlier when compared with traditional indices. ► Integrated “cardiovascular-EEG-renal” model to better understand DIKI mechanisms ► Promotes 3R's principles in drug discovery and development

  16. Assessing lahars from ice-capped volcanoes using ASTER satellite data, the SRTM DTM and two different flow models: case study on Iztaccíhuatl (Central Mexico

    Directory of Open Access Journals (Sweden)

    D. Schneider

    2008-06-01

    Full Text Available Lahars frequently affect the slopes of ice-capped volcanoes. They can be triggered by volcano-ice interactions during eruptions but also by processes such as intense precipitation or by outbursts of glacial water bodies not directly related to eruptive activity. We use remote sensing, GIS and lahar models in combination with ground observations for an initial lahar hazard assessment on Iztaccíhuatl volcano (5230 m a.s.l., considering also possible future developments of the glaciers on the volcano. Observations of the glacial extent are important for estimations of future hazard scenarios, especially in a rapidly changing tropical glacial environment. In this study, analysis of the glaciers on Iztaccíhuatl shows a dramatic retreat during the last 150 years: the glaciated area in 2007 corresponds to only 4% of the one in 1850 AD and the glaciers are expected to survive no later than the year 2020. Most of the glacial retreat is considered to be related to climate change but in-situ observations suggest also that geo- and hydrothermal heat flow at the summit-crater area can not be ruled out, as emphasized by fumarolic activity documented in a former study. However, development of crater lakes and englacial water reservoirs are supposed to be a more realistic scenario for lahar generation than sudden ice melting by rigorous volcano-ice interaction. Model calculations show that possible outburst floods have to be larger than ~5×105 m3 or to achieve an H/L ratio (Height/runout Length of 0.2 and lower in order to reach the populated lower flanks. This threshold volume equals 2.4% melted ice of Iztaccíhuatl's total ice volume in 2007, assuming 40% water and 60% volumetric debris content of a potential lahar. The model sensitivity analysis reveals important effects of the generic type of the Digital Terrain Model (DTM used on the results. As a consequence, the predicted affected areas can vary significantly. For such

  17. CAPS Simulation Environment Development

    Science.gov (United States)

    Murphy, Douglas G.; Hoffman, James A.

    2005-01-01

    The final design for an effective Comet/Asteroid Protection System (CAPS) will likely come after a number of competing designs have been simulated and evaluated. Because of the large number of design parameters involved in a system capable of detecting an object, accurately determining its orbit, and diverting the impact threat, a comprehensive simulation environment will be an extremely valuable tool for the CAPS designers. A successful simulation/design tool will aid the user in identifying the critical parameters in the system and eventually allow for automatic optimization of the design once the relationships of the key parameters are understood. A CAPS configuration will consist of space-based detectors whose purpose is to scan the celestial sphere in search of objects likely to make a close approach to Earth and to determine with the greatest possible accuracy the orbits of those objects. Other components of a CAPS configuration may include systems for modifying the orbits of approaching objects, either for the purpose of preventing a collision or for positioning the object into an orbit where it can be studied or used as a mineral resource. The Synergistic Engineering Environment (SEE) is a space-systems design, evaluation, and visualization software tool being leveraged to simulate these aspects of the CAPS study. The long-term goal of the SEE is to provide capabilities to allow the user to build and compare various CAPS designs by running end-to-end simulations that encompass the scanning phase, the orbit determination phase, and the orbit modification phase of a given scenario. Herein, a brief description of the expected simulation phases is provided, the current status and available features of the SEE software system is reported, and examples are shown of how the system is used to build and evaluate a CAPS detection design. Conclusions and the roadmap for future development of the SEE are also presented.

  18. Platform Performance and Challenges - using Platforms in Lego Company

    DEFF Research Database (Denmark)

    Munk, Lone; Mortensen, Niels Henrik

    2009-01-01

    needs focus on the incentive of using the platform. This problem lacks attention in literature, as well as industry, where assessment criteria do not cover this aspect. Therefore, we recommend including user incentive in platform assessment criteria to these challenges. Concrete solution elements...... ensuring user incentive in platforms is an object for future research...

  19. The PRIMA-PIETRA Project: A Web-Based Platform for Early Autism Risk Assessment

    OpenAIRE

    Ruta, Liliana; Siracusano, Rosamaria; Tortorella, Gaetano; Boncoddo, Maria; Colombi, Costanza; Crifaci, Giulia; Billeci, Lucia; Tartarisco, Gennaro; Ferro, Marcello; Narzisi, Antonio; Muratori, Filippo; Pioggia, Giovanni

    2013-01-01

    It is well recognized that the best outcomes in autism spectrum disorders (ASD) are achieved through early diagnosis and early intervention. ASD symptoms may occur as early as 12-18 months and different instruments have been developed for early autism risk assessment under the age of 2 years. The Modified Checklist for Autism in Children (M-CHAT) is a developmental surveillance-screening instrument administered during 18- to 36-month well-child visits that was demonstrated to improve early id...

  20. A human pluripotent stem cell platform for assessing developmental neural toxicity screening

    OpenAIRE

    Hou, Zhonggang; Zhang, Jue; Schwartz, Michael P.; Stewart, Ron; Page, C David; Murphy, William L.; Thomson, James A

    2013-01-01

    A lack of affordable and effective testing and screening procedures mean surprisingly little is known about the health hazards of many of the tens of thousands of chemicals in use in the world today. The recent rise in the number of children affected by neurological disorders such as autism has stirred valuable debate about the role chemicals play in our daily life, highlighting the need for improved methods of assessing chemicals for developmental neural toxicity. Current methods of testing ...

  1. Positional Quality Assessment of Orthophotos Obtained from Sensors Onboard Multi-Rotor UAV Platforms

    Science.gov (United States)

    Mesas-Carrascosa, Francisco Javier; Rumbao, Inmaculada Clavero; Berrocal, Juan Alberto Barrera; Porras, Alfonso García-Ferrer

    2014-01-01

    In this study we explored the positional quality of orthophotos obtained by an unmanned aerial vehicle (UAV). A multi-rotor UAV was used to obtain images using a vertically mounted digital camera. The flight was processed taking into account the photogrammetry workflow: perform the aerial triangulation, generate a digital surface model, orthorectify individual images and finally obtain a mosaic image or final orthophoto. The UAV orthophotos were assessed with various spatial quality tests used by national mapping agencies (NMAs). Results showed that the orthophotos satisfactorily passed the spatial quality tests and are therefore a useful tool for NMAs in their production flowchart. PMID:25587877

  2. Positional Quality Assessment of Orthophotos Obtained from Sensors Onboard Multi-Rotor UAV Platforms

    Directory of Open Access Journals (Sweden)

    Francisco Javier Mesas-Carrascosa

    2014-11-01

    Full Text Available In this study we explored the positional quality of orthophotos obtained by an unmanned aerial vehicle (UAV. A multi-rotor UAV was used to obtain images using a vertically mounted digital camera. The flight was processed taking into account the photogrammetry workflow: perform the aerial triangulation, generate a digital surface model, orthorectify individual images and finally obtain a mosaic image or final orthophoto. The UAV orthophotos were assessed with various spatial quality tests used by national mapping agencies (NMAs. Results showed that the orthophotos satisfactorily passed the spatial quality tests and are therefore a useful tool for NMAs in their production flowchart.

  3. Positional quality assessment of orthophotos obtained from sensors onboard multi-rotor UAV platforms.

    Science.gov (United States)

    Mesas-Carrascosa, Francisco Javier; Rumbao, Inmaculada Clavero; Berrocal, Juan Alberto Barrera; Porras, Alfonso García-Ferrer

    2014-01-01

    In this study we explored the positional quality of orthophotos obtained by an unmanned aerial vehicle (UAV). A multi-rotor UAV was used to obtain images using a vertically mounted digital camera. The flight was processed taking into account the photogrammetry workflow: perform the aerial triangulation, generate a digital surface model, orthorectify individual images and finally obtain a mosaic image or final orthophoto. The UAV orthophotos were assessed with various spatial quality tests used by national mapping agencies (NMAs). Results showed that the orthophotos satisfactorily passed the spatial quality tests and are therefore a useful tool for NMAs in their production flowchart. PMID:25587877

  4. A Delay Vector Variance based Marker for an Output-Only Assessment of Structural Changes in Tension Leg Platforms

    Science.gov (United States)

    Jaksic, V.; Wright, C.; Mandic, D. P.; Murphy, J.; Pakrashi, V.

    2015-07-01

    Although aspects of power generation of many offshore renewable devices are well understood, their dynamic responses under high wind and wave conditions are still to be investigated to a great detail. Output only statistical markers are important for these offshore devices, since access to the device is limited and information about the exposure conditions and the true behaviour of the devices are generally partial, limited, and vague or even absent. The markers can summarise and characterise the behaviour of these devices from their dynamic response available as time series data. The behaviour may be linear or nonlinear and consequently a marker that can track the changes in structural situations can be quite important. These markers can then be helpful in assessing the current condition of the structure and can indicate possible intervention, monitoring or assessment. This paper considers a Delay Vector Variance based marker for changes in a tension leg platform tested in an ocean wave basin for structural changes brought about by single column dampers. The approach is based on dynamic outputs of the device alone and is based on the estimation of the nonlinearity of the output signal. The advantages of the selected marker and its response with changing structural properties are discussed. The marker is observed to be important for monitoring the as- deployed structural condition and is sensitive to changes in such conditions. Influence of exposure conditions of wave loading is also discussed in this study based only on experimental data.

  5. Quality Assessment of Roof Planes Extracted from Height Data for Solar Energy Systems by the EAGLE Platform

    Directory of Open Access Journals (Sweden)

    Simon Schuffert

    2015-12-01

    Full Text Available Due to the increasing scarcity of fossil fuels and the upwards trend in energy costs over time, many countries—especially in Europe—have begun to modify their energy policies aiming to increase that percentage obtained from renewable energies. The EAGLE (FP7 program, European Commission has developed a web-based platform to promote renewable energy systems (RES in the public and private sectors, and to deliver a comprehensive information source for all interested users. In this paper, a comprehensive quality assessment of extracted roof planes suitable for solar energy installations (photovoltaic, solar thermal from height data derived automatically from both LiDAR (Light Detection and Ranging and aerial images will be presented. A shadow analysis is performed regarding the daily path of the sun including the shading effects of nearby objects (chimneys, dormers, vegetation, buildings, topography, etc.. A quality assessment was carried out for both LiDAR and aerial images of the same test sites in UK and Germany concerning building outline accuracy, extraction rate of roof planes and the accuracy of their geometric parameters (inclination and aspect angle, size. The benefit is an optimized system to extract roof planes for RES with a high level of detail, accuracy and flexibility (concerning different commonly available data sources including an estimation of quality of the results which is important for individual house owners as well as for regional applications by governments or solar energy companies to judge their usefulness.

  6. [Diagnostic accuracy for alcoholic liver disease with controlled Attenuation Parameter (CAP) measured by transient elastography for the non-invasive assessment of liver steatosis].

    Science.gov (United States)

    Kikuchi, Masahiro; Umeda, Rumiko; Tsuruya, Kota; Shiozawa, Hirokazu; Matsushima, Masashi; Abe, Keiichiro; Kikuchi, Miho; Takahashi, Masahiko; Yamagishi, Yoshiyuki; Nishizaki, Hiroyasu; Horie, Yoshinori; Kanai, Takanori

    2015-10-01

    Along with the development of interferon and therapeutic medication, the incidence of viral hepatitis constituting the largest part of liver disease decreased, and the main target in the field of liver disease is now shifting from viral hepatitis to alcoholic liver disease (ALD) and non-alcoholic fatty liver disease (NAFLD) as metabolic liver disease. Although these diseases tend.to. be gathered as non-viral liver disease because the similar specific liver tissue, the natural history and etiology are considerably different between them. We need to distinguish both of them to do appropriate treatment intervention. Questioning of amount of drinking is needed, but we experience some difficult cases to understand drinking history because of a too little declaration of amount of drinking. A new ultrasonic image analyses using propagation speed in the organization of the pulse vibration wave was developed as Fibroscan by Echosens company in recent years. Fibroscan is a non-invasive test to quantify liver fibrosis as Liver Stiffness Measurement (LSM). It also detects and quantifies steatosis simultaneously using the Controlled Attenuation Parameter (CAP). CAP is a measurement of the ultrasound attenuation. We measured liver steatosis of patients using Fibroscan, and other blood tests. 63 cases of ALD, 177 cases of NAFLD, 57 cases of Virus and 271 cases of Normal were enrolled. CAP value were significantly lower in the ALD group compared with NAFLD group. (P Fibroscan for ALD patients, comparing the results of them to those of virus patients and NAFLD patients. PMID:26946784

  7. An adaptable mesocosm platform for performing integrated assessments of nanomaterial risk in complex environmental systems

    Science.gov (United States)

    Auffan, Mélanie; Tella, Marie; Santaella, Catherine; Brousset, Lenka; Paillès, Christine; Barakat, Mohamed; Espinasse, Benjamin; Artells, Ester; Issartel, Julien; Masion, Armand; Rose, Jérôme; Wiesner, Mark R.; Achouak, Wafa; Thiéry, Alain; Bottero, Jean-Yves

    2014-07-01

    Physical-chemists, (micro)biologists, and ecologists need to conduct meaningful experiments to study the environmental risk of engineered nanomaterials with access to relevant mechanistic data across several spatial and temporal scales. Indoor aquatic mesocosms (60L) that can be tailored to virtually mimic any ecosystem appear as a particularly well-suited device. Here, this concept is illustrated by a pilot study aimed at assessing the distribution of a CeO2-based nanomaterial within our system at low concentration (1.5 mg/L). Physico-chemical as well as microbiological parameters took two weeks to equilibrate. These parameters were found to be reproducible across the 9-mesocosm setup over a 45-day period of time. Recovery mass balances of 115 +/- 18% and 60 +/- 30% of the Ce were obtained for the pulse dosing and the chronic dosing, respectively. This demonstrated the relevance of our experimental approach that allows for adequately monitoring the fate and impact of a given nanomaterial.

  8. DEVELOPMENT OF AN INSPECTION PLATFORM AND A SUITE OF SENSORS FOR ASSESSING CORROSION AND MECHANICAL DAMAGE ON UNPIGGABLE TRANSMISSION MAINS

    Energy Technology Data Exchange (ETDEWEB)

    George C. Vradis

    2003-07-01

    This development program is a joint effort among the Northeast Gas Association (formerly New York Gas Group), Foster-Miller, Inc., and the US Department of Energy (DOE) through the National Energy Technology Laboratory (NETL). The DOE's contribution to this project is $572,525 out of a total of $772,525. The present report summarizes the accomplishments of the project during its third three-month period (from April 2003 through June 2003). The project was initiated with delay in February 2003 due to contractual issues that emerged between NGA and Foster-Miller, Inc. The two organizations are working diligently to maintain the program's pace and expect to complete it in time. The efforts of the project focused during this period in finalizing the assessment of the tether technology, which is intended to be used as the means of communication between robot and operator. Results indicate that the tether is a viable option under certain pipeline operating conditions, but not all. Concerns also exist regarding the abrasion resistance of the tether, this issue being the last studied. Substantial work was also conducted on the design of the robotic platform, which has progressed very well. Finally, work on the MFL sensor, able to negotiate all pipeline obstacles (including plug valves), was initiated by PII following the successful completion of the subcontract negotiations between Foster-Miller and PII. The sensor design is at this point the critical path in the project's timetable.

  9. Mechanical capping of silica nanotubes for encapsulation of molecules.

    Science.gov (United States)

    Yu, Jaeeun; Bai, Xia; Suh, Junghun; Lee, Sang Bok; Son, Sang Jun

    2009-11-01

    Multifunctional silica nanotubes (SNTs) are being widely used for many biomedical applications due to their structural benefits. Controlling the structure of the open end of an SNT is a crucial step for drug/gene delivery and for fabrication of multifunctional SNTs. We developed a mechanical capsulation method to fabricate caps at the ends of SNTs. A thin layer of malleable capping materials (Au, Ag, PLGA) was deposited onto the surface of an SNT-grown AAO template. Capped SNTs were then obtained by hammering with alumina microbeads. For a proof-of-concept experiment, we demonstrated dye-encapsulated SNTs without any chemical functionalizations. Since a mechanical approach is free of the issue of chemical compatibility between cargo molecules and capping materials, the method can provide an effective platform for the preparation of smart multifunctional nanotubes for biomedical applications. PMID:19824675

  10. SW-platform for R&D in Applications of Synchrophasor Measurements for Wide-Area Assessment, Control and Visualization in Real-Time

    DEFF Research Database (Denmark)

    Jóhannsson, Hjörtur; Morais, Hugo; Pedersen, Allan Henning Birger;

    2014-01-01

    operation when a critical operation has been identified. An important part of the SOSPO project is the development of a SW - platform that enables testing and demonstrations of the various methods for wide - area assessment, control and visualization the project delivers. In order to test the methods under......The Danish research project “Secure Operation of Sustainable Power Systems (SOSPO)” is currently being conducted in a collaboration by a group of partners from academia and industry. The focus of the project is on how to achieve secure operation of the power grid as large scale thermal power plants...... realistic conditions, the future system scenarios are represented in a real time grid simulator that is an integrated part of the platform. The SW - platform provides structured access to any model parameter as well as access to real - time phasor measurement unit (PMU) and remote terminal unit (RTU...

  11. Performance of blasting caps

    Science.gov (United States)

    Bement, Laurence J. (Inventor); Schimmel, Morry L. (Inventor); Perry, Ronnie B. (Inventor)

    1993-01-01

    Common blasting caps are made from an aluminum shell in the form of a tube which is closed at both ends. One end, which is called the output end, terminates in a principal side or face, and contains a detonating agent which communicates with a means for igniting the detonating agent. The improvement of the present invention is a flat, steel foil bonded to the face in a position which is aligned perpendicularly to the longitudinal axis of the tube.

  12. Capping the Mortgage Interest Deduction

    OpenAIRE

    Anderson, John E.; Clemens, Jeffrey; Hanson, Andrew

    2007-01-01

    In this paper we examine the economic implications of several policy options for capping the mortgage interest deduction (MID). We extend the standard user–cost model of owner–occupied housing to include a cap on the mortgage size receiving tax–favored status. Our user–cost estimates for taxpayers with mortgages above the current–law cap are 4.41 percent higher than estimates from a model without the cap. We simulate the share of mortgage dollars that would be subject to three alternative cap...

  13. Saltstone Clean Cap Formulation

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C

    2005-04-22

    The current operation strategy for using Saltstone Vault 4 to receive 0.2 Ci/gallon salt solution waste involves pouring a clean grout layer over the radioactive grout prior to initiating pour into another cell. This will minimize the radiating surface area and reduce the dose rate at the vault and surrounding area. The Clean Cap will be used to shield about four feet of Saltstone poured into a Z-Area vault cell prior to moving to another cell. The minimum thickness of the Clean Cap layer will be determined by the cesium concentration and resulting dose levels and it is expected to be about one foot thick based on current calculations for 0.1 Ci Saltstone that is produced in the Saltstone process by stabilization of 0.2 Ci salt solution. This report documents experiments performed to identify a formulation for the Clean Cap. Thermal transient calculations, adiabatic temperature rise measurements, pour height, time between pour calculations and shielding calculations were beyond the scope and time limitations of this study. However, data required for shielding calculations (composition and specific gravity) are provided for shielding calculations. The approach used to design a Clean Cap formulation was to produce a slurry from the reference premix (10/45/45 weight percent cement/slag/fly ash) and domestic water that resembled as closely as possible the properties of the Saltstone slurry. In addition, options were investigated that may offer advantages such as less bleed water and less heat generation. The options with less bleed water required addition of dispersants. The options with lower heat contained more fly ash and less slag. A mix containing 10/45/45 weight percent cement/slag/fly ash with a water to premix ratio of 0.60 is recommended for the Clean Cap. Although this mix may generate more than 3 volume percent standing water (bleed water), it has rheological, mixing and flow properties that are similar to previously processed Saltstone. The recommended

  14. Saltstone Clean Cap Formulation

    International Nuclear Information System (INIS)

    The current operation strategy for using Saltstone Vault 4 to receive 0.2 Ci/gallon salt solution waste involves pouring a clean grout layer over the radioactive grout prior to initiating pour into another cell. This will minimize the radiating surface area and reduce the dose rate at the vault and surrounding area. The Clean Cap will be used to shield about four feet of Saltstone poured into a Z-Area vault cell prior to moving to another cell. The minimum thickness of the Clean Cap layer will be determined by the cesium concentration and resulting dose levels and it is expected to be about one foot thick based on current calculations for 0.1 Ci Saltstone that is produced in the Saltstone process by stabilization of 0.2 Ci salt solution. This report documents experiments performed to identify a formulation for the Clean Cap. Thermal transient calculations, adiabatic temperature rise measurements, pour height, time between pour calculations and shielding calculations were beyond the scope and time limitations of this study. However, data required for shielding calculations (composition and specific gravity) are provided for shielding calculations. The approach used to design a Clean Cap formulation was to produce a slurry from the reference premix (10/45/45 weight percent cement/slag/fly ash) and domestic water that resembled as closely as possible the properties of the Saltstone slurry. In addition, options were investigated that may offer advantages such as less bleed water and less heat generation. The options with less bleed water required addition of dispersants. The options with lower heat contained more fly ash and less slag. A mix containing 10/45/45 weight percent cement/slag/fly ash with a water to premix ratio of 0.60 is recommended for the Clean Cap. Although this mix may generate more than 3 volume percent standing water (bleed water), it has rheological, mixing and flow properties that are similar to previously processed Saltstone. The recommended

  15. DEVELOPMENT OF AN INSPECTION PLATFORM AND A SUITE OF SENSORS FOR ASSESSING CORROSION AND MECHANICAL DAMAGE ON UNPIGGABLE TRANSMISSION MAINS

    Energy Technology Data Exchange (ETDEWEB)

    George C. Vradis; Bill Leary

    2004-01-14

    This development program is a joint effort among the Northeast Gas Association (formerly New York Gas Group), Foster-Miller, Inc., and the US Department of Energy (DOE) through the National Energy Technology Laboratory (NETL). The total cost of the project is $772,525, with the National Energy Technology Laboratory of the US Department of Energy contributing $572,525, and the Northeast Gas Association contributing $200,000. The present report summarizes the accomplishments of the project during its fourth three-month period (from July 2003 through September 2003). The efforts of the project focused during this period in completing the assessment of the tether technology, which is intended to be used as the means of communication between robot and operator, in designing the MFL sensor module, in completing the kinematic studies, and in initiating tractor design. In addition, work on the ovality sensor progressed significantly, while work on system integration was initiated focusing at this point in time on module coupling. Results to date indicate that the robotic system under design will be able to meet most of the design specifications initially specified. Earlier concerns regarding the portability of the system are shown to be a non-issue, with new more detailed analysis showing that from a locomotor point of view an inspection of a 16 inch-24 inch pipe size range with a single platform is most likely possible However, the limitations imposed by the sensor are more restrictive, preliminary results indicating an inspection range of 16 inch-20 inch pipe sizes. In addition, tether use will most likely have to be limited to medium and low flow conditions in order to preserve tether integrity.

  16. DEVELOPMENT OF AN INSPECTION PLATFORM AND A SUITE OR SENSORS FOR ASSESSING CORROSION AND MECHANICAL DAMAGE ON UNPIGGABLE TRANSMISSION MAINS

    Energy Technology Data Exchange (ETDEWEB)

    George C. Vradis

    2004-02-01

    This development program is a joint effort among the Northeast Gas Association (formerly New York Gas Group), Foster-Miller, Inc., GE Oil & Gas (PII), and the US Department of Energy (DOE) through the National Energy Technology Laboratory (NETL). The total cost of the project is $772,525, with the National Energy Technology Laboratory of the US Department of Energy contributing $572,525, and the Northeast Gas Association contributing $200,000. The present report summarizes the accomplishments of the project during its fifth three-month period (from October 2003 through December 2003). The efforts of the project focused during this period in completing the assessment of the tether technology, which is intended to be used as the means of communication between robot and operator, in completing the design of the MFL sensor modules, and in completing the kinematic studies and tractor design. In addition, work on the ovality sensor has been completed, while work on system integration is nearly complete. Results to date indicate that the robotic system under design will be able to meet most of the design specifications initially prescribed. The kinematic analysis shows that from a locomotor point of view an inspection of a 16 inch-24 inch pipe size range with a single platform is most likely possible. However, the limitations imposed by the sensor are more restrictive, final preliminary design results showing that in order to cover this pipe range, two different sensor systems will be needed; one for the 16 inch-20 inch pipe size range and one for the 20 inch-24 inch range. Finally, the analysis has shown that tether operation will be limited to flows of less than 30 ft/sec; these results will have to be confirmed experimentally during the next phase of work.

  17. Preliminary Test for Constitutive Models of CAP

    Energy Technology Data Exchange (ETDEWEB)

    Choo, Yeon Joon; Hong, Soon Joon; Hwang, Su Hyun; Lee, Keo Hyung; Kim, Min Ki; Lee, Byung Chul [FNC Tech., Seoul (Korea, Republic of); Ha, Sang Jun; Choi, Hoon [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2010-05-15

    The development project for the domestic design code was launched to be used for the safety and performance analysis of pressurized light water reactors. As a part of this project, CAP (Containment Analysis Package) code has been developing for the containment safety and performance analysis side by side with SPACE. The CAP code treats three fields (vapor, continuous liquid and dispersed drop) for the assessment of containment specific phenomena, and is featured by assessment capabilities in multi-dimensional and lumped parameter thermal hydraulic cell. Thermal hydraulics solver was developed and has a significant progress now. Implementation of the well proven constitutive models and correlations are essential in other for a containment code to be used with the generalized or optimized purposes. Generally, constitutive equations are composed of interfacial and wall transport models and correlations. These equations are included in the source terms of the governing field equations. In order to develop the best model and correlation package of the CAP code, various models currently used in major containment analysis codes, such as GOTHIC, CONTAIN2.0 and CONTEMPT-LT are reviewed. Several models and correlations were incorporated for the preliminary test of CAP's performance and test results and future plans to improve the level of execution besides will be discussed in this paper

  18. An assessment of dedicated energy crops in Europe under the EU Energy Reference Scenario 2013. Application of the LUISA modelling platform - Updated Configuration 2014

    OpenAIRE

    PERPIÑA CASTILLO CAROLINA; BARANZELLI CLAUDIA; MAES JOACHIM; ZULIAN GRAZIA; LOPES BARBOSA ANA LUISA; VANDECASTEELE INE; MARI RIVERO INES; VALLECILLO RODRIGUEZ SARA; BATISTA E SILVA FILIPE; JACOBS CHRISTIAAN; Lavalle, Carlo

    2015-01-01

    This report presents a comprehensive analysis of dedicated energy crops (ENCR) performed with the LUISA (Land Use-based Integrated Sustainability Assessment) modelling platform across Europe between 2020 and 2050. LUISA is configured in compliance with the “EU Energy, Transport and GHG emissions trends until 2050” document in order to ensure that the EU meet its climate and energy targets up to 2050 (EU Reference Scenario 2013, updated LUISA configuration 2014). The spatial modelling of ENCR ...

  19. Perspectives on the CAP Theorem

    OpenAIRE

    Gilbert, Seth; Lynch, Nancy Ann

    2012-01-01

    Almost twelve years ago, in 2000, Eric Brewer introduced the idea that there is a fundamental trade-off between consistency, availability, and partition tolerance. This trade-off, which has become known as the CAP Theorem, has been widely discussed ever since. In this paper, we review the CAP Theorem and situate it within the broader context of distributed computing theory. We then discuss the practical implications of the CAP Theorem, and explore some general techniques for coping with the i...

  20. Impact Response Study on Covering Cap of Aircraft Big-Size Integral Fuel Tank

    Science.gov (United States)

    Wang, Fusheng; Jia, Senqing; Wang, Yi; Yue, Zhufeng

    2016-05-01

    In order to assess various design concepts and choose a kind of covering cap design scheme which can meet the requirements of airworthiness standard and ensure the safety of fuel tank. Using finite element software ANSYS/LS- DYNA, the impact process of covering cap of aircraft fuel tank by projectile were simulated, in which dynamical characteristics of simple single covering cap and gland double-layer covering cap impacted by titanium alloy projectile and rubber projectile were studied, as well as factor effects on simple single covering cap and gland double-layer covering cap under impact region, impact angle and impact energy were also studied. Though the comparison of critical damage velocity and element deleted number of the covering caps, it shows that the external covering cap has a good protection effect on internal covering cap. The regions close to boundary are vulnerable to appear impact damage with titanium alloy projectile while the regions close to center is vulnerable to occur damage with rubber projectile. Equivalent strain in covering cap is very little when impact angle is less than 15°. Element deleted number in covering cap reaches the maximum when impact angle is between 60°and 65°by titanium alloy projectile. While the bigger the impact angle and the more serious damage of the covering cap will be when rubber projectile impact composite covering cap. The energy needed for occurring damage on external covering cap and internal covering cap is less than and higher than that when single covering cap occur damage, respectively. The energy needed for complete breakdown of double-layer covering cap is much higher than that of single covering cap.

  1. Design and assessment of a wrapped cylindrical Ca-P AZ31 Mg alloy for critical-size ulna defect repair.

    Science.gov (United States)

    Smith, Montserrat Rabago; Atkinson, Patrick; White, Désirée; Piersma, Tyler; Gutierrez, Gloria; Rossini, Gianny; Desai, Sapna; Wellinghoff, Stephen; Yu, Hui; Cheng, Xingguo

    2012-01-01

    Recently, magnesium has been investigated as a promising bioresorbable orthopedic biomaterial. Its mechanical properties are very similar to natural bone, making it appropriate for load-bearing orthopedic fracture repair applications. However, significant hurdles remain regarding the design of practical implants and methods to control degradation and enhance biocompatibility. Although attempts have been made to hinder magnesium's rapid corrosion via alloying and coating, these studies have used solid monoliths. In an effort to reduce the amount of alloy used for implantation in a shape that mimics cortical bone shape, this study used a thin sheet of Mg AZ31 which was rolled into hollow cylindrical scaffolds. The scaffold was coated with different amounts of Ca-P; this implant demonstrated slowed corrosion in simulated body fluid (SBF) as well as enhanced biocompatibility for mesenchymal stem cells (MSC). In vivo implantation of magnesium alloy scaffold adjacent to the rat femur showed significant biointegration with further deposition of complex Mg-Ca phosphates/carbonates typical of natural bone. Finally, the implant was placed in a critical-size ulna defect in live rabbits, which lead to radiographic union and partial restoration of biomechanical strength in the defect. This study demonstrated that a thin sheet of coated Mg alloy that was spirally wrapped wound be a promising orthopedic biomaterial for bone repair. PMID:22102519

  2. Towards allele-level human leucocyte antigens genotyping - assessing two next-generation sequencing platforms: Ion Torrent Personal Genome Machine and Illumina MiSeq.

    Science.gov (United States)

    Duke, J L; Lind, C; Mackiewicz, K; Ferriola, D; Papazoglou, A; Derbeneva, O; Wallace, D; Monos, D S

    2015-10-01

    Human leucocyte antigens (HLA) typing has been a challenge due to extreme polymorphism of the HLA genes and limitations of the current technologies and protocols used for their characterization. Recently, next-generation sequencing techniques have been shown to be a well-suited technology for the complete characterization of the HLA genes. However, a comprehensive assessment of the different platforms for HLA typing, describing the limitations and advantages of each of them, has not been presented. We have compared the Ion Torrent Personal Genome Machine (PGM) and Illumina MiSeq, currently the two most frequently used platforms for diagnostic applications, for a number of metrics including total output, quality score per position across the reads and error rates after alignment which can all affect the accuracy of HLA genotyping. For this purpose, we have used one homozygous and three heterozygous well-characterized samples, at HLA-A, HLA-B, HLA-C, HLA-DRB1 and HLA-DQB1. The total output of bases produced by the MiSeq was higher, and they have higher quality scores and a lower overall error rate than the PGM. The MiSeq also has a higher fidelity when sequencing through homopolymer regions up to 9 bp in length. The need to set phase between distant polymorphic sites was more readily achieved with MiSeq using paired-end sequencing of fragments that are longer than those obtained with PGM. Additionally, we have assessed the workflows of the different platforms for complexity of sample preparation, sequencer operation and turnaround time. The effects of data quality and quantity can impact the genotyping results; having an adequate amount of good quality data to analyse will be imperative for confident HLA genotyping. The overall turnaround time can be very comparable between the two platforms; however, the complexity of sample preparation is higher with PGM, while the actual sequencing time is longer with MiSeq. PMID:26119888

  3. Payment Platform

    DEFF Research Database (Denmark)

    Hjelholt, Morten; Damsgaard, Jan

    2012-01-01

    Payment transactions through the use of physical coins, bank notes or credit cards have for centuries been the standard formats of exchanging money. Recently online and mobile digital payment platforms has entered the stage as contenders to this position and possibly could penetrate societies...... applies a co-evolutionary multilevel perspective to model the interplay and processes between technology and society wherein digital payment platforms potentially will substitute other payment platforms just like the credit card negated the check. On this basis this paper formulate a multilevel conceptual...

  4. Downlink Coexistence Performance Assessment and Techniques for WiMAX Services from High Altitude Platform and Terrestrial Deployments

    OpenAIRE

    Grace D; Yang Z.; Mohammed A; Hult T

    2008-01-01

    Abstract We investigate the performance and coexistence techniques for worldwide interoperability for microwave access (WiMAX) delivered from high altitude platforms (HAPs) and terrestrial systems in shared 3.5 GHz frequency bands. The paper shows that it is possible to provide WiMAX services from individual HAP systems. The coexistence performance is evaluated by appropriate choice of parameters, which include the HAP deployment spacing radius, directive antenna beamwidths based on ado...

  5. A Multichannel Bioluminescence Determination Platform for Bioassays.

    Science.gov (United States)

    Kim, Sung-Bae; Naganawa, Ryuichi

    2016-01-01

    The present protocol introduces a multichannel bioluminescence determination platform allowing a high sample throughput determination of weak bioluminescence with reduced standard deviations. The platform is designed to carry a multichannel conveyer, an optical filter, and a mirror cap. The platform enables us to near-simultaneously determine ligands in multiple samples without the replacement of the sample tubes. Furthermore, the optical filters beneath the multichannel conveyer are designed to easily discriminate colors during assays. This optical system provides excellent time- and labor-efficiency to users during bioassays. PMID:27424912

  6. The inter-rater reliability of categories of auditory performance-II (CAP)-II

    OpenAIRE

    Gilmour, Louise

    2010-01-01

    The aim of the present study was to validate a modified version of the Categories of Auditory Performance (CAP) rating scale, the CAP-II. The CAP is a hierarchy rating scale which assesses a child?s functioning in everyday situations. It covers a range of auditory performance and also takes into consideration different developmental rates of children. Inter-rater reliability was assessed by participants rating benefits young children receive with cochlear implants (CI). Volunteers watched vid...

  7. The effects of plaque morphology and material properties on peak cap stress in human coronary arteries.

    Science.gov (United States)

    Akyildiz, Ali C; Speelman, Lambert; Nieuwstadt, Harm A; van Brummelen, Harald; Virmani, Renu; van der Lugt, Aad; van der Steen, Anton F W; Wentzel, Jolanda J; Gijsen, Frank J H

    2016-01-01

    Heart attacks are often caused by rupture of caps of atherosclerotic plaques in coronary arteries. Cap rupture occurs when cap stress exceeds cap strength. We investigated the effects of plaque morphology and material properties on cap stress. Histological data from 77 coronary lesions were obtained and segmented. In these patient-specific cross sections, peak cap stresses were computed by using finite element analyses. The finite element analyses were 2D, assumed isotropic material behavior, and ignored residual stresses. To represent the wide spread in material properties, we applied soft and stiff material models for the intima. Measures of geometric plaque features for all lesions were determined and their relations to peak cap stress were examined using regression analyses. Patient-specific geometrical plaque features greatly influence peak cap stresses. Especially, local irregularities in lumen and necrotic core shape as well as a thin intima layer near the shoulder of the plaque induce local stress maxima. For stiff models, cap stress increased with decreasing cap thickness and increasing lumen radius (R = 0.79). For soft models, this relationship changed: increasing lumen radius and increasing lumen curvature were associated with increased cap stress (R = 0.66). The results of this study imply that not only accurate assessment of plaque geometry, but also of intima properties is essential for cap stress analyses in atherosclerotic plaques in human coronary arteries. PMID:26237279

  8. Design and implementation of the protective cap/biobarrier experiment at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    The Protective Cap/Biobarrier Experiment (PCBE), initiated in 1993 at the Idaho National Engineering Laboratory (INEL), is a strip-split plot experiment with three replications designed to rigorously test a 2.0-m loessal soil cap against a cap recommended by the US Environmental Protection Agency and two caps with biological intrusion barriers. Past research at INEL indicates that it should be possible to exclude water from buried wastes using natural materials and natural processes in arid environments rather than expensive materials (geotextiles) and highly engineered caps. The PCBE will also test the effects of two vegetal covers and three irrigation levels on cap performance. Drainage pans, located at the bottom of each plot, will monitor cap failure. Soil water profiles will be monitored biweekly by neutron probe and continuously by time domain reflectometry. The performance of each cap design will be monitored under a variety of conditions through 1998. From 1994 to 1996, the authors will assess plant establishment, rooting depths, patterns of moisture extraction and their interactions among caps, vegetal covers, and irrigation levels. In 1996, they will introduce ants and burrowing mammals to test the structural integrity of each cap design. In 1998, the authors will apply sufficient water to determine the failure limit for each cap design. The PCBE should provide reliable knowledge of the performances of the four cap designs under a variety of conditions and aid in making hazardous-waste management decisions at INEL and at disposal sites in similar environments

  9. Review of Dublin Institute of Technology's E-Learning Platform for Effective Teaching Fromative Assessment and Feedback

    OpenAIRE

    Kehily, Dermot

    2011-01-01

    This paper investigates Dublin Institute of Technology’s (DIT) ‘webcourses.dit.ie’ created for DIT with Blackboard Learning System software as an effective e-learning tool on a module in the School of Real Estate and Construction Economics in DIT. Webcourses.dit.ie is an e-learning platform providing support and assistance to both lecturers and students as part of their daily teaching and learning experience. Webcourses as it is known in DIT is both a course management system for lecturers an...

  10. Biomimicry 3D gastrointestinal spheroid platform for the assessment of toxicity and inflammatory effects of zinc oxide nanoparticles.

    Science.gov (United States)

    Chia, Sing Ling; Tay, Chor Yong; Setyawati, Magdiel I; Leong, David T

    2015-02-11

    Our current mechanistic understanding on the effects of engineered nanoparticles (NPs) on cellular physiology is derived mainly from 2D cell culture studies. However, conventional monolayer cell culture may not accurately model the mass transfer gradient that is expected in 3D tissue physiology and thus may lead to artifactual experimental conclusions. Herein, using a micropatterned agarose hydrogel platform, the effects of ZnO NPs (25 nm) on 3D colon cell spheroids of well-defined sizes are examined. The findings show that cell dimensionality plays a critical role in governing the spatiotemporal cellular outcomes like inflammatory response and cytotoxicity in response to ZnO NPs treatment. More importantly, ZnO NPs can induce different modes of cell death in 2D and 3D cell culture systems. Interestingly, the outer few layers of cells in 3D model could only protect the inner core of cells for a limited time and periodically slough off from the spheroids surface. These findings suggest that toxicological conclusions made from 2D cell models might overestimate the toxicity of ZnO NPs. This 3D cell spheroid model can serve as a reproducible platform to better reflect the actual cell response to NPs and to study a more realistic mechanism of nanoparticle-induced toxicity. PMID:25331163

  11. Assessing conservation agricultural production systems (CAPS) for small holder farmers in rain-fed farming system in sub-Saharan Africa (SSA)

    OpenAIRE

    Nambozo, J.; Norton, Jay B.; Okeyo, M.; Judith A Odhiambo; Owori, M.; Oluko, P.; Ogonga, P.

    2012-01-01

    The challenge of sufficient food production by farmers in rainfed farming systems of sub-Saharan Africa is exacerbated by soil degradation and poor soil nutrient status. The objective of this study was to assess the effects of reduced and no tillage and velvet bean (Mucuna pruriens) cover crop on greenhouse gas (GHG) emissions and noxious weed population in alternative cropping practices to maize-bean production. Using a completely randomized block design, four replications of three tillage i...

  12. OPAL detector end-cap

    CERN Multimedia

    1988-01-01

    An end-cap of the OPAL detector with its electromagnetic calorimeter. The calorimeter consists of 566 Cherenkov lead glass counters and weighs 10 tonnes. The OPAL detector ran on the LEP accelerator between 1989 and 2000.

  13. ATLAS - End-Cap calorimeter

    CERN Multimedia

    2006-01-01

    The End-cap calorimeter was moved with the help of the rails and this calorimeter will measure the energy of particles close to the beam axis when protons collide. Cooling is important for maximum detector efficiency.

  14. Researchers dodge UK migration cap

    Science.gov (United States)

    Dacey, James

    2011-03-01

    Research scientists are among those to be prioritized under the UK government's new immigration rules that will impose an annual cap on the number of work visas issued to those from outside the European Union (EU).

  15. Genetics Home Reference: cap myopathy

    Science.gov (United States)

    ... or a spine that curves to the side ( scoliosis ). The name cap myopathy comes from characteristic abnormal ... health conditions: Diagnostic Tests Drug Therapy Surgery and Rehabilitation Genetic Counseling Palliative Care Related Information How are ...

  16. Interfacial and Wall Transport Models for SPACE-CAP Code

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Soon Joon; Choo, Yeon Joon; Han, Tae Young; Hwang, Su Hyun; Lee, Byung Chul [FNC Tech., Seoul (Korea, Republic of); Choi, Hoon; Ha, Sang Jun [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    The development project for the domestic design code was launched to be used for the safety and performance analysis of pressurized light water reactors. And CAP (Containment Analysis Package) code has been also developed for the containment safety and performance analysis side by side with SPACE. The CAP code treats three fields (gas, continuous liquid, and dispersed drop) for the assessment of containment specific phenomena, and is featured by its multidimensional assessment capabilities. Thermal hydraulics solver was already developed and now under testing of its stability and soundness. As a next step, interfacial and wall transport models was setup. In order to develop the best model and correlation package for the CAP code, various models currently used in major containment analysis codes, which are GOTHIC, CONTAIN2.0, and CONTEMPT-LT, have been reviewed. The origins of the selected models used in these codes have also been examined to find out if the models have not conflict with a proprietary right. In addition, a literature survey of the recent studies has been performed in order to incorporate the better models for the CAP code. The models and correlations of SPACE were also reviewed. CAP models and correlations are composed of interfacial heat/mass, and momentum transport models, and wall heat/mass, and momentum transport models. This paper discusses on those transport models in the CAP code.

  17. Platform computing

    CERN Multimedia

    2002-01-01

    "Platform Computing releases first grid-enabled workload management solution for IBM eServer Intel and UNIX high performance computing clusters. This Out-of-the-box solution maximizes the performance and capability of applications on IBM HPC clusters" (1/2 page) .

  18. DEVELOPMENT OF AN INSPECTION PLATFORM AND A SUITE OF SENSORS FOR ASSESSING CORROSION AND MECHANICAL DAMAGE ON UNPIGGABLE TRANSMISSION MAINS

    Energy Technology Data Exchange (ETDEWEB)

    George C. Vradis; William Leary

    2004-03-01

    The National Energy Technology Laboratory of the US Department of Energy (under Award DE-FC26-02NT41645) and the NYSEARCH Committee of the Northeast Gas Association (previous the New York Gas Group), have sponsored research to develop a robotic pipeline inspection system capable of navigation through the typical physical and operational obstacles that make transmission and distribution pipelines unpiggable. The research contractors, Foster-Miller and GE Oil & Gas (PII North America) have performed an engineering study and developed a conceptual design that meets all the requirements for navigating and inspecting unpiggable transmission pipelines. Based on Foster-Miller's previous efforts developing the Pipe Mouse robot, the RoboScan inspection robot (Figure ES-1) meets the navigational and physical challenges of unpiggable pipelines through an innovative modular platform design, segmented MFL inspection modules and improvements to the inter-module coupling design.

  19. Cr isotope stratigraphy of Ediacaran cap dolostones, Doushantuo Formation, South China

    Science.gov (United States)

    Rodler, Alexandra; Hohl, Simon V.; Guo, Qingjun; Frei, Robert

    2016-04-01

    The Yangtze Platform in South China is considered a key site for studying Neoproterozoic ocean oxygenation. The chromium isotope composition (δ53Cr) of marine carbonates has shown to be a sensitive tracer of changing (paleo)redox conditions and was previously linked to photosynthetic activity (1). We applied this emerging proxy to cap dolostones of a deep water and a shallow marine carbonate section pertaining to the Doushantuo Formation that have previously been used to constrain the redox evolution of Ediacaran seawater (2,3). Postglacial detrital contamination and diagenetic alteration appear to have influenced the δ53Cr values of Doushantuo cap dolostones as evidenced by systematic changes in δ53Cr and Cr concentrations coupled with several geochemical tracers. We use Al concentrations as indicator of detrital contamination and to calculate the authigenic Cr isotope composition. Further, we hypothesis that post-depositional remobilization of Cr might have resulted in the loss of heavy Cr isotopes and the retention of light Cr isotopes during precipitation of secondary carbonates. This scenario is supported by a decrease in δ53Cr values that is correlated with a loss of Sr and increasingly light δ18Ocarb signals, which would indicate meteoric fluid/rock interaction and diagenetic alteration by continental basin fluids. However, some cap dolostones may still show pristine Ediacaran seawater signals with positively fractionated δ53Cr (relative to bulk silicate Earth; 4), 87Sr/86Sr close to Ediacaran seawater values and a pronounced negative Ce anomaly. These tracers reveal light pulses of enhanced postglacial oxidative weathering during cap dolostone deposition. The Cr isotope composition of Ediacaran cap dolostones pertaining to the Doushantuo Formation trace changes in past redox conditions, where fine-scale δ53Cr fluctuations are perhaps a result of detrital contamination and diagenetic alteration balanced against a signal of oxidative weathering

  20. Establishing diagnostic platform for environmental biosafety assessment of genetically modified plants based on the decision-tree method

    OpenAIRE

    Lei Wang; Chao Yang; Bao-Rong Lu

    2010-01-01

    Transgenic biotechnology and its products provide important solutions for the great challenge of global food security. Biosafety assessment of genetically modified organisms (GMOs) including their food and environmental safety is a prerequisite for the commercialization and safe application of transgenic biotechnologyproducts. However, existing methodologies cannot meet the urgent requirements for rapid biosafety assessment of the increasing number of new and sophisticated GMOs. Therefore, a ...

  1. ITS Platform

    DEFF Research Database (Denmark)

    Tøfting, Svend; Lahrmann, Harry; Agerholm, Niels;

    2014-01-01

    Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden...... GPS box with data connection to a backend server. The ITS Platform project has had a budget of DKK 33 million (app € 4.4) and it has demonstrated that boxes which register the position of the cars can be helpful to drivers in many ways. Establishing dynamic traffic information and support systems for...... safer and more economic driving is technologically possible. Big Data from the system can provide traffic authorities with a better basis for decision for their traffic planning. Last, but not least, it is possible to establish payment systems. The project has also shown that the boxes in the cars do...

  2. Creation of polar cap patches

    Science.gov (United States)

    Hosokawa, K.; Taguchi, S.; Ogawa, Y.

    2014-12-01

    Polar cap patches, which are islands of enhanced plasma density drifting anti-sunward, are one of the outstanding phenomena in the polar cap F region ionosphere. In the last decade, data from all-sky airglow imagers have been extensively used for better understanding the propagation of patches in the central polar cap region. But still, it has been rather difficult to capture the birth of patches in their generation region near the dayside cusp, because, in most places, the dayside part of the polar cap ionosphere is sunlit even in winter. In Longyearbyen (78.1N, 15.5E), Norway, however, optical observations are possible near the dayside cusp region in a limited period around the winter solstice. This enables us to directly image how polar cap patches are born in the cusp. In this paper, we present a few intervals of daytime optical observations, during which polar cap patches were generated within the field-of-view of an all-sky imager in Longyearbyen. During all the intervals studied here, we identified several signatures of poleward moving auroral forms (PMAF) in the equatorward half of the field-of-view, which are known as ionospheric manifestations of dayside reconnection. Interestingly, patches were directly produced from such poleward moving auroral signatures and propagated poleward along the anti-sunward convection near the cusp. In the literature, Lorentzen et al. (2012) first reported such a direct production of patches from PMAFs. During the current observations, however, we succeeded in tracking the propagation of patches until they reached the poleward edge of the field-of-view of the imager. This confirms that the faint airglow structures produced from PMAFs were actually transported for a long distance towards the central polar cap area; thus, polar cap patches were produced. From this set of observations, we suggest that polar cap patches during moderately disturbed conditions (i.e, non-storm time conditions) can be directly produced by the

  3. An integrated assessment of the catchment-scale energy and water balance using a terrestrial systems modeling platform and observations

    Science.gov (United States)

    Sulis, Mauro; Shrestha, Prabhakar; Keune, Jessica; Steinke, Sandra; Diederich, Malte; Schween, Jan; Crewell, Susanne; Simmer, Clemens; Kollet, Stefan

    2016-04-01

    Fully coupled hydrological models close the water and energy cycles while accounting for the dynamic feedbacks between the subsurface, land surface, and atmosphere compartments of terrestrial systems. Diagnoses of their predictive capabilities require spatio-temporal coherent data sets including states and fluxes across the soil-vegetation-atmosphere continuum. This study presents an extensive comparison between numerical simulations carried out using a novel integrated hydrological modeling platform (TerrSysMP) and a suite of cross-compartmental observations obtained from intensive field campaigns and continuous monitoring over the Rur catchment in western Germany during the HOPE experiment (April-May 2013). The observations encompass amongst others rainfall estimates from several X-band radars, atmospheric integrated water vapor estimates from microwave radiometers, radiation and turbulent fluxes at the land surface, and soil moisture retrieval from cosmic-ray probes. A detailed analysis of the radiation components indicates that TerrSysMP systematically overestimates incoming shortwave due to a cloudiness effect, but underestimates incoming longwave due to a lower simulated atmospheric water vapor content. Screening of observed and simulated data for clear sky conditions also reveals mismatches between surface albedo at certain locations within the catchment. Moreover, a preliminary cross-comparison of precipitation and soil moisture suggests that overall the model is able to reproduce catchment dynamics reasonably well while pronounced discrepancies between model and observations were observed in the mountainous region due to the lack of detailed soil parameterization (i.e., soil organic content) and the underestimation of some rainfall events.

  4. A comprehensive approach to assess Arabidopsis survival phenotype in water-limited condition using a non-invasive high-throughput phenomics platform

    Directory of Open Access Journals (Sweden)

    Emilio eVello

    2015-12-01

    Full Text Available With the rapid rise in global population and the challenges caused by climate changes, the maximization of plant productivity and the development of sustainable agriculture strategies are vital for food security. One of the resources more affected in this new environment will be the limitation of water.In this study, we describe the use of non-invasive technologies exploiting sensors for visible, fluorescent and near-infrared lights to accurately screen survival phenotypes in Arabidopsis thaliana exposed to water-limited conditions. We implemented two drought protocols and a robust analysis methodology that enabled us to clearly assess the wilting or dryness status of the plants at different time points using a phenomics platform. In conclusion, our approach has shown to be very accurate and suitable for experiments where hundred of samples have to be screened making a manual evaluation unthinkable. This approach can be used not only in functional genomics studies but also in agricultural applications.

  5. Pilot study: Assessing repeatability of the EcoWalk platform resistive pressure sensors to measure plantar pressure during barefoot standing

    International Nuclear Information System (INIS)

    Plantar pressure provides useful information to assess the feet's condition. These systems have emerged as popular tools in clinical environment. These systems present errors and no compensation information is presented by the manufacturer, leading to uncertainty in the measurements. Ten healthy subjects, 5 females and 5 males, were recruited. Lateral load distribution, antero-posterior load distribution, average pressure, contact area, and force were recorded. The aims of this study were to assess repeatability of the EcoWalk system and identify the range of pressure values observed in the normal foot. The coefficient of repeatability was less than 4% for all parameters considered.

  6. Nano-CeO2 decorated graphene based chitosan nanocomposites as enzymatic biosensing platform: fabrication and cellular biocompatibility assessment.

    Science.gov (United States)

    De, Sriparna; Mohanty, Smita; Nayak, Sanjay Kumar

    2015-09-01

    The present study summarizes the designing of a green transducer phase based on nano-cerium oxide (CeO2) decorated reduced graphene oxide (RGO) reinforced chitosan nanocomposites as an effective enzyme immobilizer and bio-sensing matrix for glucose analyte. Also, it scrutinizes the biocompatibility and cell viability of the synthesized nanohybrid with human fibroblastic macrophage cell line. CeO2 nanoparticles (NPs) were successfully grown on graphene nanosheet in the presence of cationic surfactant followed by facile hydrothermal treatment. The eventual growth of synthesized CeO2 nanocrystals on the graphene layer was confirmed from X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman analysis. The biocompatibility of the synthesized nanohybrid was also evident from the MTT assay. Glucose oxidase (GOx) was employed on the green polymer nanocomposites modified FTO electrode to fabricate an enzymatic bioelectrode. The electroanalytical response of the GOx/nano-CeO2/RGO/CS/FTO bioelectrode towards electrooxidation of glucose analyte was investigated by electrochemical impedance (EIS) and cyclic voltammetry (CV) study. The resulting biosensor exhibited a good electrochemical response to glucose within the linear detection range of 0.05-6.5 mM with a low detection limit of 2 μM and a sensitivity of 7.198 μA mM(-1) cm(-2). The bioelectrode also showed good shelf life (~10 weeks) and negligible interfering ability under controlled environment. The obtained results indicate that nano-CeO2/RGO nanohybrid based chitosan nanocomposites achieve a biocompatible biosensing platform for effective enzyme immobilization due to the excellent synergistic effects between the CeO2 nanoparticles and graphene sheet. PMID:25980384

  7. Environmental data for the planning of off-shore wind parks from the EnerGEO Platform of Integrated Assessment (PIA)

    International Nuclear Information System (INIS)

    The EU-sponsored EnerGEO project aims at providing decision makers with a modelling platform to assess the environmental impacts of different sources of renewable energy. One of the pillars of the project is the Wind Energy Pilot, addressing the effects of offshore wind parks on air pollution and energy use. The methods used in the pilot and the underlying environmental databases are integrated into a WebGIS client tool and made available to the public. This paper is dedicated to describing the environmental databases and supporting data incorporated in the client tool. A 27-km resolution, 11-year wind database is created using the WRF model. The wind database is used to assess the wind climate in the north-west Atlantic region and to derive the potential power output from offshore wind parks. Auxiliary data concerning water depth, distance to shore and distance to the nearest suitable port are created to aid the planning and maintenance phases. Seasonal workability conditions are assessed using a 20-year wave database. The distance at which future wind parks should be placed to exhibit different wind climates is investigated. (orig.)

  8. Development of CAP code for nuclear power plant containment: Lumped model

    International Nuclear Information System (INIS)

    Highlights: • State-of-art containment analysis code, CAP, has been developed. • CAP uses 3-field equations, water level oriented upwind scheme, local head model. • CAP has a function of linked calculation with reactor coolant system code. • CAP code assessments showed appropriate prediction capabilities. - Abstract: CAP (nuclear Containment Analysis Package) code has been developed in Korean nuclear society for the analysis of nuclear containment thermal hydraulic behaviors including pressure and temperature trends and hydrogen concentration. Lumped model of CAP code uses 2-phase, 3-field equations for fluid behaviors, and has appropriate constitutive equations, 1-dimensional heat conductor model, component models, trip and control models, and special process models. CAP can run in a standalone mode or a linked mode with a reactor coolant system analysis code. The linked mode enables the more realistic calculation of a containment response and is expected to be applicable to a more complicated advanced plant design calculation. CAP code assessments were carried out by gradual approaches: conceptual problems, fundamental phenomena, component and principal phenomena, experimental validation, and finally comparison with other code calculations on the base of important phenomena identifications. The assessments showed appropriate prediction capabilities of CAP

  9. Development of CAP code for nuclear power plant containment: Lumped model

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Soon Joon, E-mail: sjhong90@fnctech.com [FNC Tech. Co. Ltd., Heungdeok 1 ro 13, Giheung-gu, Yongin-si, Gyeonggi-do 446-908 (Korea, Republic of); Choo, Yeon Joon; Hwang, Su Hyun; Lee, Byung Chul [FNC Tech. Co. Ltd., Heungdeok 1 ro 13, Giheung-gu, Yongin-si, Gyeonggi-do 446-908 (Korea, Republic of); Ha, Sang Jun [Central Research Institute, Korea Hydro & Nuclear Power Company, Ltd., 70, 1312-gil, Yuseong-daero, Yuseong-gu, Daejeon 305-343 (Korea, Republic of)

    2015-09-15

    Highlights: • State-of-art containment analysis code, CAP, has been developed. • CAP uses 3-field equations, water level oriented upwind scheme, local head model. • CAP has a function of linked calculation with reactor coolant system code. • CAP code assessments showed appropriate prediction capabilities. - Abstract: CAP (nuclear Containment Analysis Package) code has been developed in Korean nuclear society for the analysis of nuclear containment thermal hydraulic behaviors including pressure and temperature trends and hydrogen concentration. Lumped model of CAP code uses 2-phase, 3-field equations for fluid behaviors, and has appropriate constitutive equations, 1-dimensional heat conductor model, component models, trip and control models, and special process models. CAP can run in a standalone mode or a linked mode with a reactor coolant system analysis code. The linked mode enables the more realistic calculation of a containment response and is expected to be applicable to a more complicated advanced plant design calculation. CAP code assessments were carried out by gradual approaches: conceptual problems, fundamental phenomena, component and principal phenomena, experimental validation, and finally comparison with other code calculations on the base of important phenomena identifications. The assessments showed appropriate prediction capabilities of CAP.

  10. The online Prescriptive Index platform for the assessment of managerial competencies and coaching needs: development and initial validation of the experience sampling Mood Wheel and the Manager-Rational and Irrational Beliefs Scale

    OpenAIRE

    David, O.A.

    2013-01-01

    The Prescriptive Index platform is dedicated to the appraisal and development of managerial competencies, and it is comprised of such measures as the multi-rater Freeman-Gavita Prescriptive Executive Coaching (PEC) Assessment for assessing core managerial skills, and the multi-rater Managerial Coaching Assessment System (MCAS) for the evaluation of coaching competencies in managers. The aim of this research was to present the development and psychometric properties of new tools, part of the P...

  11. From Blogs to Bottle Caps

    Science.gov (United States)

    Edinger, Ted

    2012-01-01

    There is a wonderful community of art educators connecting a once-isolated profession through blogging. Art educators around the world are sharing ideas and communicating with their peers through this amazing resource. In this article, the author describes the bottle cap mural at Tulip Grove Elementary School which was inspired by this exchange of…

  12. The antimicrobial propeptide hCAP-18 plasma levels in neutropenia of various aetiologies

    DEFF Research Database (Denmark)

    Ye, Ying; Carlsson, Göran; Karlsson-Sjöberg, Jenny M T;

    2015-01-01

    The underlying cause of neutropenia may be difficult to determine due to similar clinical presentation in many neutropenic conditions. The neutrophil protein hCAP-18 (pro-LL-37) is a major component of neutrophil secondary granules and in this prospective study we assessed the use of hCAP-18 levels...... in blood plasma for differential diagnosis of neutropenic patients (n = 133) of various aetiologies. Plasma levels of hCAP-18 were determined using immunoblot and ELISA. Patients with severe congenital neutropenia (n = 23) presented with the lowest levels of plasma hCAP-18 and differential diagnostic...... diagnostic value in differential diagnosis of chronic neutropenia. Neutropenic patients with Shwachman-Diamond syndrome, Barth syndrome, Cohen syndrome, acute myeloid leukaemia and specific granule deficiency presented with reduced plasma hCAP-18 levels as well. The blood plasma level of hCAP-18 was thus low...

  13. 基于AHP的应急平台信息安全风险评估%ASSESSING INFORMATION SECURITY RISK OF THE EMERGENCY PLATFORM BASED ON AHP

    Institute of Scientific and Technical Information of China (English)

    张永妹; 王瑛; 李树仁; 党德鹏; 武建军

    2009-01-01

    Assessing information security risk of the emergency platform is a key task for its construction in China. Various risk values are determined by analyzing information security risk elements, applying AHP and constructing risk Hierarchy structure model, combining with constructed risk assessment math model. It is very important to avoid, reduce and transfer the security risk and strengthen security.%应急平台信息安全风险评估是我国应急平台建设工作重点任务之一.分析了应急平台信息安全风险要素,运用层次分析法,构建风险层次结构模型,结合构造的风险评估数学模型,最终确定了应急平台所面临的各类风险值.根据分析结果对应急平台安全风险进行规避,降低,转移,对加强应急平台安全具有重要意义.

  14. Thick Methacrylate Sections Devoid of Lost Caps Simplify Stereological Quantifications Based on the Optical Fractionator Design

    DEFF Research Database (Denmark)

    Hasselholt, Stine; Lykkesfeldt, Jens; Overgaard Larsen, Jytte

    2015-01-01

    methacrylate) sections were inspected for lost caps to evaluate the possibility of whole section thickness counting with the optical fractionator technique and hippocampal granular cell nucleoli density differences along the z-axis were assessed with a z-axis analysis. No lost caps were found in the examined...

  15. Laboratory testing of closure cap repair techniques

    International Nuclear Information System (INIS)

    Landfill design requires a low permeability closure cap as well as a low permeability liner. The Savannah River Site, in South Carolina, has approximately 85 acres of mixed waste landfills covered with compacted kaolin clay. Maintaining low permeability of the clay cap requires both that the permeability of the compacted clay itself remain low and that the integrity of the barrier be maintained. Barrier breaches typically result from penetration by roots or animals, and especially cracks caused by uneven settling or desiccation. In this study, clay layers, 0.81 m in diameter and 7.6 cm thick, were compacted in 7 lysimeters to simulate closure caps. The hydraulic conductivity of each layer was measured, and the compacted clay layers (CCL's) were cracked by drying. Then various repair techniques were applied and the effectiveness of each repair was assessed by remeasuring the hydraulic conductivity. Finally the repaired CCL was again dried and measured to determine how the repair responded to the conditions that caused the original failure. For a full report of this investigation see Persoff et al. Six repair techniques have been tested, four of which involve the use of injectable barrier liquids colloidal silica (CS) and polysiloxane (PSX) described below: (I) covering the crack with a bentonite geosynthetic clay liner (GCL), (ii) recompaction of new kaolinite at STD+3 moisture content joined to existing kaolinite that had dried and shrunk, (iii) direct injection of colloidal silica to a crack, (iv) injection of colloidal silica (CS) to wells in an overlying sand layer, (v) direct injection of polysiloxane to a crack, and (vi), injection of polysiloxane (PSX) to wells in an overlying soil layer

  16. Platform christened

    International Nuclear Information System (INIS)

    On Friday May 9, 1997, a ceremony took place in which the Hibernia platform was officially christened by Aline Chretien, the wife of the Prime Minister of Canada. The ceremony highlighted the successful completion of Hibernia and the tremendous accomplishment of this offshore structure which will be towed out of Bull Arm, Newfoundland, in June 1997 to its offshore location. Drilling for the first well will begin in August with first oil expected by December 1997. Other guests at the ceremony included Hibernia owner companies Mobil Oil, Chevron, Petro-Canada, Canada Hibernia Holding Corp., Murphy Oil and Norsk Hydro. The Hibernia project paves the way for other offshore ventures and employment opportunities in Newfoundland

  17. Tip cap for a rotor blade

    Science.gov (United States)

    Kofel, W. K.; Tuley, E. N.; Gay, C. H., Jr.; Troeger, R. E.; Sterman, A. P. (Inventor)

    1983-01-01

    A replaceable tip cap for attachment to the end of a rotor blade is described. The tip cap includes a plurality of walls defining a compartment which, if desired, can be divided into a plurality of subcompartments. The tip cap can include inlet and outlet holes in walls thereof to permit fluid communication of a cooling fluid there through. Abrasive material can be attached with the radially outer wall of the tip cap.

  18. Assessing the impact of common forensic presumptive tests on the ability to obtain results using a novel rapid DNA platform.

    Science.gov (United States)

    Donachie, Gillian E; Dawnay, Nick; Ahmed, Romana; Naif, Sarah; Duxbury, Nicola J; Tribble, Nicholas D

    2015-07-01

    The rise of DNA evidence to the forefront of forensic science has led to high sample numbers being submitted for profiling by investigators to casework laboratories: bottleneck effects are often seen resulting in slow turnaround times and sample backlog. The ParaDNA(®) Screening and Intelligence Tests have been designed to guide investigators on the viability of potential sources of DNA allowing them to determine which samples should be sent for full DNA analysis. Both tests are designed to augment the arsenal of available forensic tests for end users and be used concurrently to those commonly available. Therefore, assessing the impact that common forensic tests have on such novel technology is important to measure. The systems were tested against various potential inhibitors to which samples may be exposed as part of the investigative process. Presumptive test agents for biological materials (blood, semen and saliva) and those used as fingerprint enhancement agents were both used. The Screening Test showed a drop in performance following application of aluminium powder and cyanoacrylate (CNA) on fingerprints samples; however this drop in performance was not replicated with high template DNA. No significant effect was observed for any agent using the Intelligence Test. Therefore, both tests stand up well to the chemical agents applied and can be used by investigators with confidence that system performance will be maintained. PMID:25864157

  19. Dynamic Modeling of an Evapotranspiration Cap

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Steven Piet; Rafael Soto; Gerald Sehlke; Harold Heydt; John Visser

    2005-10-01

    The U.S. Department of Energy is scheduled to design and install hundreds of landfill caps/barriers over the next several decades and these caps will have a design life expectancy of up to 1,000 years. Other landfill caps with 30 year design lifetimes are reaching the end of their original design life; the changes to these caps need to be understood to provide a basis for lifetime extension. Defining the attributes that make a successful cap (one that isolates the waste from the environment) is crucial to these efforts. Because cap systems such as landfill caps are dynamic in nature, it is impossible to understand, monitor, and update lifetime predictions without understanding the dynamics of cap degradation, which is most often due to multiple interdependent factors rather than isolated independent events. In an attempt to understand the dynamics of cap degradation, a computer model using system dynamics is being developed to capture the complex behavior of an evapotranspiration cap. The specific objectives of this project are to capture the dynamic, nonlinear feedback loop structures underlying an evapotranspiration cap and, through computer simulation, gain a better understanding of long-term behavior, influencing factors, and, ultimately, long-term cap performance.

  20. Analyses of hydraulic performance of velocity caps

    DEFF Research Database (Denmark)

    Christensen, Erik Damgaard; Degn Eskesen, Mark Chr.; Buhrkall, Jeppe;

    2014-01-01

    The hydraulic performance of a velocity cap has been investigated. Velocity caps are often used in connection with offshore intakes. CFD (computational fluid dynamics) examined the flow through the cap openings and further down into the intake pipes. This was combined with dimension analyses...

  1. 21 CFR 888.3000 - Bone cap.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bone cap. 888.3000 Section 888.3000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3000 Bone cap. (a) Identification. A bone cap is a...

  2. ATLAS End Cap toroid in upstanding position

    CERN Multimedia

    2005-01-01

    End Cap toroid The ATLAS End Cap toroid weights 240-ton and is 12-m diameter high. The parts of this vacuum vessel had to be integrated and tested so that End Cap Toroid has no leaks. After that it could be cooled down to 80 K.

  3. Dynamic Modeling of an Evapotranspiration Cap

    International Nuclear Information System (INIS)

    The U.S. Department of Energy is scheduled to design and install hundreds of landfill caps/barriers over the next several decades and these caps will have a design life expectancy of up to 1,000 years. Other landfill caps with 30 year design lifetimes are reaching the end of their original design life; the changes to these caps need to be understood to provide a basis for lifetime extension. Defining the attributes that make a successful cap (one that isolates the waste from the environment) is crucial to these efforts. Because cap systems such as landfill caps are dynamic in nature, it is impossible to understand, monitor, and update lifetime predictions without understanding the dynamics of cap degradation, which is most often due to multiple interdependent factors rather than isolated independent events. In an attempt to understand the dynamics of cap degradation, a computer model using system dynamics is being developed to capture the complex behavior of an evapotranspiration cap. The specific objectives of this project are to capture the dynamic, nonlinear feedback loop structures underlying an evapotranspiration cap and, through computer simulation, gain a better understanding of long-term behavior, influencing factors, and, ultimately, long-term cap performance

  4. Economic evaluation of closure cap barrier materials study

    International Nuclear Information System (INIS)

    Volume II of the Economic Evaluation of the Closure Cap Barrier Materials, Revision I contains detailed cost estimates for closure cap barrier materials. The cost estimates incorporate the life cycle costs for a generic hazardous waste seepage basin closure cap under the RCRA Post Closure Period of thirty years. The economic evaluation assessed six barrier material categories. Each of these categories consists of several composite cover system configurations, which were used to develop individual cost estimates. The information contained in this report is not intended to be used as a cost estimating manual. This information provides the decision makers with the ability to screen barrier materials, cover system configurations, and identify cost-effective materials for further consideration

  5. Economic evaluation of closure cap barrier materials study

    Energy Technology Data Exchange (ETDEWEB)

    Serrato, M.G.; Bhutani, J.S.; Mead, S.M.

    1993-09-01

    Volume II of the Economic Evaluation of the Closure Cap Barrier Materials, Revision I contains detailed cost estimates for closure cap barrier materials. The cost estimates incorporate the life cycle costs for a generic hazardous waste seepage basin closure cap under the RCRA Post Closure Period of thirty years. The economic evaluation assessed six barrier material categories. Each of these categories consists of several composite cover system configurations, which were used to develop individual cost estimates. The information contained in this report is not intended to be used as a cost estimating manual. This information provides the decision makers with the ability to screen barrier materials, cover system configurations, and identify cost-effective materials for further consideration.

  6. Supporting the Interconnection of Communities of Practice: The example of TE-Cap 2

    OpenAIRE

    Lavoué, Elise; George, Sébastien

    2010-01-01

    In this paper, a general model for the Interconnection of Communities of Practice (ICP) is proposed. This model creates links between local Communities of Practice (CoPs) and global Communities of Practice on the Web. To hit the target platform specifications to support an ICP are first of all proposed, soon after the TE-Cap 2 (Tutoring Experience Capitalisation) platform for an ICP of tutors is made up to support people working on it. This platform allows the capitalisation of tutors' contex...

  7. Traceability and the new CAP

    OpenAIRE

    Maraveyas, Napoleon N.; Doukas, Yannis El.

    2009-01-01

    The Common Agricultural Policy (CAP) was strongly criticized for the food safety crises of the 1990s which included Bovine Spongiform Encephalopathy (BSE), dioxin, foot and mouth disease and swine fever to name a few. Even though the first rules on food safety date from the very early days of the EU, a need was recognized to replace a number of these rules accumulated through the years, whose implementation was difficult to monitor, with a simpler and more comprehensive approach. The result w...

  8. The online Prescriptive Index platform for the assessment of managerial competencies and coaching needs: development and initial validation of the experience sampling Mood Wheel and the Manager-Rational and Irrational Beliefs Scale

    Directory of Open Access Journals (Sweden)

    David, O.A.

    2013-12-01

    Full Text Available The Prescriptive Index platform is dedicated to the appraisal and development of managerial competencies, and it is comprised of such measures as the multi-rater Freeman-Gavita Prescriptive Executive Coaching (PEC Assessment for assessing core managerial skills, and the multi-rater Managerial Coaching Assessment System (MCAS for the evaluation of coaching competencies in managers. The aim of this research was to present the development and psychometric properties of new tools, part of the Prescriptive Index platform, for the assessment of managerial emotional competencies: the web and mobile based Mood Wheel measure using experience sampling procedures, for the assessment of current/previous distress and positive emotions; and the self-report Manager Rational and Irrational Beliefs Scale (M-RIBS for the assessment of managerial attitudes involved in emotion-regulation processes. Results obtained show that both instruments integrated in the Prescriptive Index platform have adequate initial psychometric support and predictive validity. Practical implications of our findings are discussed in the light of the importance of enabling organizations to accurately identify managerial competencies and coaching needs.

  9. Two-phase synthesis of hydrophobic ionic liquid-capped gold nanoparticles and their application for sensing cholesterol

    International Nuclear Information System (INIS)

    Highlights: • A novel cholesterol biosensor was constructed based on ChOx-IL-capped-AuNPs/GCE. • IL-capped-AuNPs was synthesized using two-phase synthesis and employed as a conducting matrix to immobilize ChOx. • Direct electrochemistry of ChOx on the electrode was obtained. • The ChOx-IL-capped-AuNPs/GCE exhibit remarkable performance for cholesterol detection. - Abstract: A novel scheme for fabrication of hydrophobic ionic liquid-capped gold nanoparticles (IL-capped AuNPs) modified electrode is presented and its application potential for cholesterol biosensor is investigated. Highly stable gold nanoparticles were characterized by UV–vis absorption spectroscopy and transmission electron microscopy (TEM). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) indicated that IL-capped AuNPs nanocomposites showed excellent electrical conductivity. Furthermore, cholesterol oxidase (ChOx) was directly immobilized on the IL-capped AuNPs nanocomposite, and then the direct electrochemistry of ChOx on the modified glass carbon electrode (GCE) was obtained. As a new platform in cholesterol analysis, ChOx-IL-capped AuNPs/GCE exhibited a linear response to cholesterol in the range of 0.1–50 μM with a detection limit of 0.033 μM. Therefore, hydrophobic ionic liquid-capped gold nanoparticles would serve as a good candidate material to construct the related enzyme biosensors

  10. Effects of intima stiffness and plaque morphology on peak cap stress

    Directory of Open Access Journals (Sweden)

    Virmani Renu

    2011-04-01

    Full Text Available Abstract Background Rupture of the cap of a vulnerable plaque present in a coronary vessel may cause myocardial infarction and death. Cap rupture occurs when the peak cap stress exceeds the cap strength. The mechanical stress within a cap depends on the plaque morphology and the material characteristics of the plaque components. A parametric study was conducted to assess the effect of intima stiffness and plaque morphology on peak cap stress. Methods Models with idealized geometries based on histology images of human coronary arteries were generated by varying geometric plaque features. The constructed multi-layer models contained adventitia, media, intima, and necrotic core sections. For adventitia and media layers, anisotropic hyperelastic material models were used. For necrotic core and intima sections, isotropic hyperelastic material models were employed. Three different intima stiffness values were used to cover the wide range reported in literature. According to the intima stiffness, the models were classified as stiff, intermediate and soft intima models. Finite element method was used to compute peak cap stress. Results The intima stiffness was an essential determinant of cap stresses. The computed peak cap stresses for the soft intima models were much lower than for stiff and intermediate intima models. Intima stiffness also affected the influence of morphological parameters on cap stresses. For the stiff and intermediate intima models, the cap thickness and necrotic core thickness were the most important determinants of cap stresses. The peak cap stress increased three-fold when the cap thickness was reduced from 0.25 mm to 0.05 mm for both stiff and intermediate intima models. Doubling the thickness of the necrotic core elevated the peak cap stress by 60% for the stiff intima models and by 90% for the intermediate intima models. Two-fold increase in the intima thickness behind the necrotic core reduced the peak cap stress by

  11. SERS sensors for DVD platform

    DEFF Research Database (Denmark)

    Brøgger, Anna Line

    This Ph.D. thesis explores the engineering of a portable sensor system for detection of rare and small molecules. The Ph.D. project is part of the research project 'Multi-Sensor DVD platform' (MUSE), aiming to integrate different sensors on a rotating disc. The sensors are chosen to complement each...... other, creating more reliable and stable results for the end user. The rotating disc comprises microfluidic channels, which can be utilized for handling and manipulating liquid samples such as blood or water. The focus of this Ph.D. thesis, is on the integration of one specific sensor on a rotating disc....... The sensor is based upon surface enhanced Raman spectroscopy (SERS), which detects molecular vibrations. The aim of this thesis is to cover the different aspects of the sensor system. SERS substrates, consisting of nanopillars with gold or silver caps on top, have been fabricated by standard micro and nano...

  12. Assessing fun in platform games

    OpenAIRE

    Diogo Ferreira Pinela

    2015-01-01

    Os jogos de plataformas são um dos géneros mais antigos de videojogos, e têm ganho popularidade recentemente devido às suas mecânicas simples. No entanto, podem tornar-se repetitivos depois de terminados, pelo que podem beneficiar significativamente do uso de geração procedimental de conteúdos, estendendo a sua duração sem aborrecer o jogador. Há vários métodos para gerar níveis procedimentalmente; alguns juntam componentes de baixo nível diretamente, enquanto outros baseiam as suas construçõ...

  13. Coupled Large Scale Hydro-mechanical Modelling for cap-rock Failure Risk Assessment of CO{sub 2} Storage in Deep Saline Aquifers; Analyse hydromecanique a grande echelle pour l'evaluation du risque de fracturation de la couverture de stockage du CO{sub 2} dans les aquiferes profonds

    Energy Technology Data Exchange (ETDEWEB)

    Rohmer, J.; Seyedi, D.M. [BRGM, Natural Risks and CO 2 Storage Safety Division, 45 - Orleans (France)

    2010-05-15

    This work presents a numerical strategy of large scale hydro-mechanical simulations to assess the risk of damage in cap-rock formations during a CO{sub 2} injection process. The proposed methodology is based on the development of a sequential coupling between a multiphase fluid flow (TOUGH2) and a hydro-mechanical calculation code (Code-Aster) that enables us to perform coupled hydro-mechanical simulation at a regional scale. The likelihood of different cap-rock damage mechanisms can then be evaluated based on the results of the coupled simulations. A scenario based approach is proposed to take into account the effect of the uncertainty of model parameters on damage likelihood. The developed methodology is applied for the cap-rock failure analysis of deep aquifer of the Dogger formation in the context of the Paris basin multilayered geological system as a demonstration example. The simulation is carried out at a regional scale (100 km) considering an industrial mass injection rate of CO{sub 2} of 10 Mt/y. The assessment of the stress state after 10 years of injection is conducted through the developed sequential coupling. Two failure mechanisms have been taken into account, namely the tensile fracturing and the shear slip reactivation of pre-existing fractures. To deal with the large uncertainties due to sparse data on the layer formations, a scenario based strategy is undertaken. It consists in defining a first reference modelling scenario considering the mean values of the hydro-mechanical properties for each layer. A sensitivity analysis is then carried out and shows the importance of both the initial stress state and the reservoir hydraulic properties on the cap-rock failure tendency. On this basis, a second scenario denoted 'critical' is defined so that the most influential model parameters are taken in their worst configuration. None of these failure criteria is activated for the considered conditions. At a phenomenological level, this study points

  14. Google Search and the Law on Dominance in the EU: An Assessment of the Compatibility of Current Methodology with Multi-Sided Platforms in Online Search

    OpenAIRE

    Herz, Martin

    2014-01-01

    Business platforms that utilise, or are based upon, internet technology are omnipresent in consumers daily lives. Since the dawn of the World Wide Web, the amount of web content has increased greatly. Simultaneously, business interests have sparked, meeting the arisen demand for particular online services. As a consequence, economists have defined a novel market in these sectors, namely that of multi-sided platform markets. To an important extent, these markets experience network effects, whi...

  15. Direct pulp capping using biodentine

    Directory of Open Access Journals (Sweden)

    Popović-Bajić Marijana

    2014-01-01

    Full Text Available Introduction. Direct pulp capping is therapeutic method of applying medication on exposed pulp in order to allow bridge formation and healing process. The aim of this study was to investigate the effect of Biodentine on exposed dental pulp of Vietnamese pigs. Material and Methods. The study was conducted on 20 teeth of Vietnamese pigs (Sus scrofa domesticus. On buccal surfaces of incisors, canines and first premolars, class V cavities were prepared and pulp was exposed. In the experimental group (six incisors, two canines and two premolars the perforation was covered with Biodentine® (Septodont, Saint-Maur-des-Fosses, France. In the control group, the perforation was covered with MTA® (Dentsply Tulsa Dental, Johnson City, TN, USA. All cavities were restored with glass ionomer cement (GC Fuji VIII, GC Corporation, Tokyo, Japan. Observation period was 28 days. After sacrificing the animals, histological preparations were done to analyze the presence of dentin bridge, an inflammatory reaction of the pulp, pulp tissue reorganization and the presence of bacteria. Results. Dentin bridge was observed in all teeth (experimental and control groups. Inflammation of the pulp was mild to moderate in both groups. Neoangiogenesis and many odontoblast like cells responsible for dentin bridge formation were detected. Necrosis was not observed in any case, neither the presence of Gram-positive bacteria in the pulp. Conclusion. Histological analysis indicated favorable therapeutic effects of Biodentine for direct pulp capping in teeth of Vietnamese pigs. Findings were similar with Biodentine and MTA.

  16. Cap rates and commercial property prices

    OpenAIRE

    Bart Hobijn; John Krainer; David Lang

    2011-01-01

    Commercial real estate capitalization rates have been found to be good indicators of expected returns in commercial properties. Recent declines in these cap rates appear to be signaling a commercial real estate rebound, indicating improved investor expectations of price growth in the market. Movements in national cap rates are the predominant drivers of changes in cap rates in local markets. Therefore, the anticipated commercial real estate rebound is likely to be widespread across many metro...

  17. Ocular injuries from flying bottle caps.

    Science.gov (United States)

    Fonseka, C

    1993-12-01

    Three cases of serious eye injury are described from flying metal caps of carbonated drink bottles. The injuries occurred while attempting to open the bottle in an unconventional and dangerous way. Though injuries from flying bottle caps have been described before, they have occurred when the bottle exploded. This is the first report of eye injuries caused by bottle caps while opening and are similar to the injuries caused by champagne corks. PMID:8143337

  18. Evaluation of management alternatives for LWR hulls and caps

    International Nuclear Information System (INIS)

    Hulls and caps resulting from the reprocessing of LWR spent fuels represent one of the major sources of alpha-bearing solid waste generated during the nuclear fuel cycle. The Commission of the European Communities has undertaken considerable R and D efforts on the development of advanced treatment and conditioning methods for this type of waste. In view of the encouraging results achieved, the Commission launched a theoretical assessment study on cladding waste management. Six practical or potential schemes were identified and elaborated: direct cementation, decontamination prior to cementation, rolling before cementation, rolling followed by embedding in graphite, compaction, and melting in a cold crucible. The economic aspects of each management option were also investigated. This included the assessment of the plant (treatment, conditioning and interim storage), transport and disposal costs. Further consideration will be required to define the best management option for 'cap' wastes. Transport and disposal costs will also require further analysis from an industrial standpoint

  19. SNMP management of MASIF platforms

    OpenAIRE

    Lopes, Rui Pedro; Oliveira, José Luís

    2001-01-01

    In this paper we describe the architecture, the development and the assessment results of an SNMP agent that allows MASIF compliant platforms to be managed through SNMP. The major outcome of this work is a simple integration of mobile agent technology with any well-established commercial network management system.

  20. IMPACT ASSESSMENT OF THE 2003 CAP REFORM AND THE NITRATE DIRECTIVE ON THE ARABLE FARMING SYSTEM IN THE MIDI-PYRÉNÉES REGION: BIO-ECONOMIC MODELING AT FIELD, FARM AND REGIONAL LEVELS

    OpenAIRE

    Louhichi, Kamel; Belhouchette, Hatem; Wery, Jacques; Therond, Olivier; Flichman, Guillermo

    2008-01-01

    This paper analyses the impact of the 2003 CAP reform (the so-called Fischler Reform) and its interaction with the Nitrate Directive on the sustainability of selected arable farming systems in a French region (Midi-Pyrénées). The Nitrate Directive is one of the oldest EU environmental programs designed to reduce water pollution by nitrate from agricultural sources, through a set of measures, defined at regional level, and mandatory for farmers of vulnerable zones. This impact analysis is perf...

  1. The cervical cap: a barrier contraceptive.

    Science.gov (United States)

    Hastings-Tolsma, M T

    1982-01-01

    The cervical cap may eventually prove to be a safe, satisfactory, noninvasive, and nonhormonal contraceptive alternative for women in the US. The cap is currently approved for investigational use only, and is available from a limited number of providers. The Prentif cavity rim cap is the most commonly used and is available in 4 sizes. The soft rubber device is thimble shaped, approximately 1 1/4 inches long, with a narrow groove along the inner surface that creates a suction seal when fitted over the cervix. The inability to match cap and cervical circumferences precisely is a recognized drawback. Theoretically, the cap alone should prevent sperm entry into the uterus, however, the use of a spermicide placed in the dome before insertion is recommended. The cap's effectiveness is not yet documented. Estimates from a 1953 study of 143 users were 92.4/100 women years of use for use effectiveness, and the theoretical effectiveness is believed to be more than 98%. Failures with the cap may result from a variety of reasons, particularly dislodgement. The advantage of the cap over other barrier methods is that it can be inserted any time prior to intercourse and left in place longer. The ideal safety period for placement has not been validated, but a range of 1-7 days has been recommended. The length of time the spermicide remains effective and the cervical effects of prolonged contact are of prime concern. The cap may be used by some women who cannot be properly fitted for a diaphragm due to vaginal or uterine anomalies. Sexual arousal and orgasmic response are reported by some cap users to be more pleasurable with the cap than with the diaphragm. Reported problems with use include discomfort during intercourse and improper fit during some days of the menstrual cycle. Contraindications for use include cervical inconsistencies, infection, allergy to the spermicide or the rubber, and inability to learn proper insertion and removal techniques. Insertion and removal may be

  2. The North Zealand CAP Monitor

    DEFF Research Database (Denmark)

    Nielsen, Minna; Ravn, Pernille; Notander Clausen, Lise;

    2016-01-01

    patients with CAP and effects of interventions to improve the quality of their care. Based on current literature we defined and tested a set of indicators and designed an audit form, a database and a dashboard for presenting the results. Two nurses monthly audited randomly selected files of patients with...... team of clinicians from the emergency department and inpatient units. Measurement of improvement Audit results are presented as a multidimensional dashboard of aggregated baseline data and run charts to monitor changes. Microbiological tests were delayed, often performed after antibiotics were started...... considered necessary required too tedious data collection or were not useful. So, we could reduce the number of indicators by nearly a third. Important steps from audit to quality dashboard were: Defining and testing audit variables Testing the audit form Defining indicators based on the audit variables...

  3. ALEPH separated barrel and end-caps

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    The end-caps can be seen at the left and right of the image with the barrel at the centre. Technicians inspect the end-cap before they begin to take it apart. ALEPH was an experiment on the LEP accelerator, which studied high-energy collisions between electrons and positrons from 1989 to 2000.

  4. Microtubule dynamics: Caps, catastrophes, and coupled hydrolysis

    DEFF Research Database (Denmark)

    Flyvbjerg, H.; Holy, T.E.; Leibler, S.

    1996-01-01

    An effective theory is formulated for the dynamics of the guanosine triphosphate (GTP) cap believed to stabilize growing microtubules. The theory provides a ''coarse-grained'' description of the cap's dynamics. ''Microscopic'' details, such as the microtubule lattice structure and the fate of its...... data. A constant nonzero catastrophe rare, identical for both microtubule ends, is predicted at large growth rates. The delay time for dilution-induced catastrophes is stochastic with a simple distribution that fits the experimental one and, like the experimental one, does not depend on the rate of....... A recent experimental result for the size of the minimal cap that can stabilize a microtubule is shown to agree with the result predicted by the cap model, after its parameters have been extracted from previous experimental results. Thus the effective theory and cap model presented here provide a...

  5. Design document for landfill capping Prototype Decision Support System

    International Nuclear Information System (INIS)

    The overall objective of the Prototype Decision Support System for shallow land burial project is to ''Develop a Decision Support System tool which incorporates simulation modeling and multi-objective decision theory for the purpose of designing and evaluating alternative trench cap designs for mixed waste landfill covers. The goal is to improve the quality of technical information used by the risk manager to select landfill cover designs while taking into account technological, economical, and regulatory factors.'' The complexity of the technical and non-technical information, and how the information varies in importance across sites, points to the need for decision analysis tools that provide a common basis for integrating, synthesizing, and valuing the decision input. Because the cost of remediating thousands of contaminated DOE sites is projected to be in the 10's--100's of billions of dollars, methods will be needed to establish cleanup priorities and to help in the selection and evaluation of cost effective remediation alternatives. Even at this early stage in DOE's cleanup program, it is certain that capping technologies will be heavily relied upon to remediate the 3000+ landfills on DOE property. Capping is favored in remediating most DOE landfills because, based on preliminary baseline risk assessments, human and ecological risks are considered to be low at most of these sites and the regulatory requirements for final closure of old landfills can be met using a well designed cap to isolate the buried waste. This report describes a program plan to design, develop, and test a decision support system (DSS) for assisting the DOE risk manager in evaluating capping alternatives for radioactive and hazardous waste landfills. The DOE DSS will incorporate methods for calculating, integrating and valuing technical, regulatory, and economic criteria

  6. Segway robotic mobility platform

    Science.gov (United States)

    Nguyen, Hoa G.; Morrell, John; Mullens, Katherine D.; Burmeister, Aaron B.; Miles, Susan; Farrington, Nathan; Thomas, Kari M.; Gage, Douglas W.

    2004-12-01

    The Segway Robotic Mobility Platform (RMP) is a new mobile robotic platform based on the self-balancing Segway Human Transporter (HT). The Segway RMP is faster, cheaper, and more agile than existing comparable platforms. It is also rugged, has a small footprint, a zero turning radius, and yet can carry a greater payload. The new geometry of the platform presents researchers with an opportunity to examine novel topics, including people-height sensing and actuation modalities. This paper describes the history and development of the platform, its characteristics, and a summary of current research projects involving the platform at various institutions across the United States.

  7. Google Search and the Law on Dominance in the EU : An Assessment of the Compatibility of Current Methodology with Multi-Sided Platforms in Online Search

    NARCIS (Netherlands)

    Herz, Martin

    2014-01-01

    Business platforms that utilise, or are based upon, internet technology are omnipresent in consumers daily lives. Since the dawn of the World Wide Web, the amount of web content has increased greatly. Simultaneously, business interests have sparked, meeting the arisen demand for particular online se

  8. Possible Effects on EU Land Markets of New CAP Direct Payments

    OpenAIRE

    Swinnen, Jo; Ciaian, Pavel; Kancs, D'Artis; Van Herck, Kristine; Vranken, Liesbet

    2013-01-01

    Direct payments (DP) in the EU-27 were introduced as the central element of the 2003 CAP reform and are implemented in different models. The 2013 CAP reform will change both the implementation of the DP and their budget. This study assesses the possible effects of the DP reform proposals on EU land markets and the extent to which the DP are capitalized in land prices.

  9. Modelling Agricultural Diffuse Pollution: CAP – WFD Interactions and Cost Effectiveness of Measures

    OpenAIRE

    Mouratiadou, Ioanna; Topp, Cairistiona; Moran, Dominic

    2008-01-01

    Within the context of the Water Framework Directive (WFD) and the Common Agricultural Policy (CAP), the design of effective and sustainable agricultural and water resources management policies presents multiple challenges. This paper presents a methodological framework that will be used to identify synergies and trade-offs between the CAP and the WFD in relation to their economic and water resources environmental effects, and to assess the cost-effectiveness of measures to control water pollu...

  10. Population Files for use with CAP88 at Los Alamos

    Energy Technology Data Exchange (ETDEWEB)

    McNaughton, Michael W [Los Alamos National Laboratory; Brock, Burgandy R [Los Alamos National Laboratory

    2012-07-10

    CAP88 (Clean Air Act Assessment Package 1988) is a computer model developed for the US Environmental Protection Agency to assess the potential dose from radionuclide emissions to air and to demonstrate compliance with the Clean Air Act. It has options to calculate either individual doses, in units of mrem, or a collective dose, also called population dose, in units of person-rem. To calculate the collective dose, CAP88 uses a population file such as LANL.pop, that lists the number of people in each sector (N, NNE, NE, etc.) as a function of distance (1 to 2 km, etc.) out to a maximum radius of 80 km. Early population files are described in the Los Alamos National Laboratory (LANL) Environmental Reports for 1985 (page 14) and subsequent years. LA-13469-MS describes a population file based on the 1990 census. These files have been updated several times, most recently in 2006 for CAP88 version 3. The 2006 version used the US census for 2000. The present paper describes the 2012 updates, using the 2010 census.

  11. Genetic ablation of root cap cells in Arabidopsis

    OpenAIRE

    Tsugeki, Ryuji; Fedoroff, Nina V.

    1999-01-01

    The root cap is increasingly appreciated as a complex and dynamic plant organ. Root caps sense and transmit environmental signals, synthesize and secrete small molecules and macromolecules, and in some species shed metabolically active cells. However, it is not known whether root caps are essential for normal shoot and root development. We report the identification of a root cap-specific promoter and describe its use to genetically ablate root caps by directing root cap-specific expression of...

  12. Mobile platform security

    CERN Document Server

    Asokan, N; Dmitrienko, Alexandra

    2013-01-01

    Recently, mobile security has garnered considerable interest in both the research community and industry due to the popularity of smartphones. The current smartphone platforms are open systems that allow application development, also for malicious parties. To protect the mobile device, its user, and other mobile ecosystem stakeholders such as network operators, application execution is controlled by a platform security architecture. This book explores how such mobile platform security architectures work. We present a generic model for mobile platform security architectures: the model illustrat

  13. Platform development supportedby gaming

    DEFF Research Database (Denmark)

    Mikkola, Juliana Hsuan; Hansen, Poul H. Kyvsgård

    2007-01-01

    The challenge of implementing industrial platforms in practice can be described as a configuration problem caused by high number of variables, which often have contradictory influences on the total performance of the firm. Consequently, the specific platform decisions become extremely complex......, based on the portfolio management thinking, to measure the degree of modularity embedded in a given platform and to what extent it is aligned with other platforms....

  14. ITS Platform North Denmark

    DEFF Research Database (Denmark)

    Lahrmann, Harry; Agerholm, Niels; Juhl, Jens;

    2012-01-01

    designed digital road map for ITS applications. The platform is freely accessible, which means that third party applications could be run on the platform. It is estimated that using this platform enables the ITS applications to be developed for 20% of the normal cost, hence third party are invited to test...

  15. The pharmaceutical vial capping process: Container closure systems, capping equipment, regulatory framework, and seal quality tests.

    Science.gov (United States)

    Mathaes, Roman; Mahler, Hanns-Christian; Buettiker, Jean-Pierre; Roehl, Holger; Lam, Philippe; Brown, Helen; Luemkemann, Joerg; Adler, Michael; Huwyler, Joerg; Streubel, Alexander; Mohl, Silke

    2016-02-01

    Parenteral drug products are protected by appropriate primary packaging to protect against environmental factors, including potential microbial contamination during shelf life duration. The most commonly used CCS configuration for parenteral drug products is the glass vial, sealed with a rubber stopper and an aluminum crimp cap. In combination with an adequately designed and controlled aseptic fill/finish processes, a well-designed and characterized capping process is indispensable to ensure product quality and integrity and to minimize rejections during the manufacturing process. In this review, the health authority requirements and expectations related to container closure system quality and container closure integrity are summarized. The pharmaceutical vial, the rubber stopper, and the crimp cap are described. Different capping techniques are critically compared: The most common capping equipment with a rotating capping plate produces the lowest amount of particle. The strength and challenges of methods to control the capping process are discussed. The residual seal force method can characterize the capping process independent of the used capping equipment or CCS. We analyze the root causes of several cosmetic defects associated with the vial capping process. PMID:26654992

  16. Capping stack: An industry in the making

    Institute of Scientific and Technical Information of China (English)

    Jack Chen; Li Xunke; Xie Wenhui; Kang Yongtian

    2013-01-01

    This paper gives an overview of recent development of the marine well containment system (MWCS)after BP Macondo subsea well blowout occurred on April 20,2010 in the Gulf of Mexico.Capping stack,a hardware utilized to contain blowout well at or near the wellhead is the center piece of MWCS.Accessibility to the dedicated capping stacks is gradually becoming a pre-requirement to obtain the permit for offshore drilling/workover,and the industry for manufacturing,maintenance,transportation and operation of the capping stack is in the making.

  17. Guidance for summarising and evaluating field studies with non-target arthropods : aguidance document of the Dutch Platform for the Assessment of Higher Tier Studies

    OpenAIRE

    Jong, de, J.; Steen, van der, M.

    2010-01-01

    Gewasbeschermingsmiddelen kunnen schadelijke effecten hebben op organismen waarvoor ze niet zijn bedoeld. Er is een richtsnoer ontwikkeld om testresultaten voor de toelatingsprocedure voor gewasbeschermingsmiddelen eenvormig en transparant aan te reiken. Het richtsnoer geldt specifiek voor veldstudies met niet-doelwit arthropoden (geleedpotigen) die boven de grond en op planten leven, bijvoorbeeld in akkers of boomgaarden. Het richtsnoer is ontwikkeld door het Nederlandse Platform voor de Beo...

  18. Atmospheric metallic and arsenic pollution at an offshore drilling platform in the Bo Sea: A health risk assessment for the workers.

    Science.gov (United States)

    Xu, Hong; Han, Suqin; Bi, Xiaohui; Zhao, Zhijing; Zhang, Lei; Yang, Wenjie; Zhang, Min; Chen, Jing; Wu, Jianhui; Zhang, Yufen; Feng, Yinchang

    2016-03-01

    To investigate the ambient metal pollution at the offshore drilling platform in the Bo Sea, which few studies have focused on, PM2.5 samples were collected and ten heavy metals, as well as As, were analyzed. High concentration levels of metals were observed, and the heavy metal pollution was quite serious compared to air quality standards and other marine areas. Back trajectories and wind dependent and PCA analyses showed that the marine sources included ship traffic emissions and corrosive stainless steels from the equipment at the platform as well as industrial emissions from stainless steel production and coal combustion sources, which were transported from the surrounding mainland. Both contributed greatly to the ambient metallic particles at the offshore platform. The Hazard Index values of the metals, which were much less than 1, the Carcinogenic Risk data, which were lower than the EPA's acceptable range, and the fact that the metal concentrations did not the exceed the permissible exposure limits of OSHA, indicated that the health risks from the ambient metallic particles for the oil-drilling workers were not significant. PMID:26547617

  19. C-CAP Hawaii 2005 Land Cover

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  20. C-CAP Land Cover, Niihau, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  1. C-CAP Land Cover, Maui, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  2. C-CAP Land Cover, Molokai, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  3. C-CAP Land Cover, Kauai, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  4. C-CAP Land Cover, Lanai, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  5. Circumpolar Active-Layer Permafrost System (CAPS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Circumpolar Active-Layer Permafrost System (CAPS) contains over 100 data sets pertaining to permafrost and frozen ground topics. It also contains detailed...

  6. The antimicrobial propeptide hCAP-18 plasma levels in neutropenia of various aetiologies: a prospective study.

    Science.gov (United States)

    Ye, Ying; Carlsson, Göran; Karlsson-Sjöberg, Jenny M T; Borregaard, Niels; Modéer, Thomas U; Andersson, Mats L; Pütsep, Katrin L-A

    2015-01-01

    The underlying cause of neutropenia may be difficult to determine due to similar clinical presentation in many neutropenic conditions. The neutrophil protein hCAP-18 (pro-LL-37) is a major component of neutrophil secondary granules and in this prospective study we assessed the use of hCAP-18 levels in blood plasma for differential diagnosis of neutropenic patients (n = 133) of various aetiologies. Plasma levels of hCAP-18 were determined using immunoblot and ELISA. Patients with severe congenital neutropenia (n = 23) presented with the lowest levels of plasma hCAP-18 and differential diagnostic accuracy revealed high sensitivity (100%) and specificity (98.8%) for hCAP-18 ELISA. The correlation coefficient of the hCAP-18 ELISA versus immunoblotting was (R = 0.831) and that of the peptide LL-37 ELISA versus immunoblotting was (R = 0.405) (P syndrome, Barth syndrome, Cohen syndrome, acute myeloid leukaemia and specific granule deficiency presented with reduced plasma hCAP-18 levels as well. The blood plasma level of hCAP-18 was thus low in conditions in which the neutrophil antibacterial propeptide hCAP-18 is deficient, i.e. severe congenital neutropenia and neutrophil-specific granule deficiency, and in conditions in which bone marrow myelopoiesis is negatively affected. PMID:26119962

  7. Mechanisms of nerve capping technique in prevention of painful neuroma formation.

    Directory of Open Access Journals (Sweden)

    Hede Yan

    Full Text Available Nerve capping techniques have been introduced as a promising treatment modality for the treatment of painful neuroma with varied outcomes; however, its exact mechanism is still unknown. RhoA is one of the members of the RAS superfamily of GTPases that operate as molecular switches and plays an important role in peripheral nerve regeneration. Our aim was to investigate the structural and morphologic mechanisms by which the nerve capping technique prevents the formation of painful neuromas after neuroectomy. We also hoped to provide a theoretical basis for this treatment approach. An aligned nanofiber conduit was used for the capping procedure and the sciatic nerve of Sprague-Dawley rats was selected as the animal model. Behavioral analysis, extent of neuroma formation, histological assessment, expressions of pain markers of substance P and c-fos, molecular biological changes as well as ultrastructural features were investigated and compared with the findings in a no-capping control group. The formation of traumatic neuromas was significantly inhibited in the capping group with relatively "normal" structural and morphological features and no occurrence of autotomy and significantly lower expression of pain markers compared to the no-capping group. The gene expression of RhoA was consistently in a higher level in the capping group within 8 weeks after surgery. This study shows that capping technique will alter the regeneration state of transected nerves and reduce painful neuroma formation, indicating a promising approach for the treatment of painful neuroma. The initiation of the "regenerative brake" induced by structural as well as morphological improvements in the severed nerve is theorized to be most likely a key mechanism for the capping technique in the prevention of painful neuroma formation.

  8. Design and implementation of the CAPS receiver

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In this paper, based on analyses of the Chinese Area Positioning System (CAPS) satellite (GEO satellite) resources and signal properties, the signal power at the port of the receiver antenna is estimated, and the implementation projects are presented for a switching band C to band L CAPS C/A code receiver integrated with GPS receiver suite and for a CAPS dual frequency P code receiver. A microstrip receiving antenna is designed with high sensitivity and wide beam orientation, the RF front end of the C/A code and P code receivers, and a processor is designed for the navigation baseband. A single frequency CAPS C/A code receiver and a CAPS dual frequency P code receiver are built at the same time. A software process flow is provided, and research on relatively key techniques is also conducted, such as signal searching, code loop and carrier loop algorithms, a height assistant algorithm, a dual frequency difference speed measurement technique, a speed measurement technique using a single frequency source with frequency assistance, and a CAPS time correcting algorithm, according to the design frame of the receiver hardware. Research results show that the static plane positioning accuracy of the CAPS C/A code receiver is 20.5-24.6 m, height accuracy is 1.2-12.8 m, speed measurement accuracy is 0.13-0.3 m/s, dynamic plane positioning accuracy is 24.4 m, height accuracy is 3.0 m, and speed measurement accuracy is 0.24 m/s. In the case of C/A code, the timing accuracy is 200 ns, and it is also shown that the positioning accuracy of the CAPS precise code receiver (1σ ) is 5 m from south to north, and 0.8 m from east to west. Finally, research on positioning accuracy is also conducted.

  9. Corrective action program (CAP) in United States

    International Nuclear Information System (INIS)

    The Corrective Action Process (CAP) is one of the most important key issues on the Nuclear Reactor Safety. The experiences on the nuclear power plant operations, including safety culture, maintenance, and so on, should be continuously evaluated and influenced to the KAIZEN (improvement) of the NPP operations. The review of the CAP system in US will be useful for the NPP safety in Japan. (author)

  10. Towards a Market Entry Framework for Digital Payment Platforms

    DEFF Research Database (Denmark)

    Kazan, Erol; Damsgaard, Jan

    2016-01-01

    This study presents a framework to understand and explain the design and configuration of digital payment platforms and how these platforms create conditions for market entries. By embracing the theoretical lens of platform envelopment, we employed a multiple and comparative-case study in a...... European setting by using our framework as an analytical lens to assess market-entry conditions. We found that digital payment platforms have acquired market entry capabilities, which is achieved through strategic platform design (i.e., platform development and service distribution) and technology design...... (i.e., issuing evolutionary and revolutionary payment instruments). The studied cases reveal that digital platforms leverage payment services as a mean to bridge and converge core and adjacent platform markets. In so doing, platform envelopment strengthens firms’ market position in their respective...

  11. Improving CAP-TSD steady pressure solutions through airfoil slope modification

    Science.gov (United States)

    Mitterer, Kent F.; Maughmer, Mark D.; Silva, Walter A.; Batina, John T.

    1996-01-01

    A modification of airfoil section geometry is examined for improvement of the leading edge pressures predicted by the Computational Aeroelasticity Program - Transonic Small Disturbance (CAP-TSD). Results are compared with Eppler solutions to assess improvement. Preliminary results indicate that a fading function modification of section slopes is capable of significant improvements in the pressures near the leading edge computed by CAP-TSD. Application of this modification to airfoil geometry before use in CAP-TSD is shown to reduce the nonphysical pressure peak predicted by the transonic small disturbance solver. A second advantage of the slope modification is the substantial reduction in sensitivity of CAP-TSD steady pressure solutions to the computational mesh.

  12. Methodology for development of risk indicators for offshore platforms

    International Nuclear Information System (INIS)

    This paper presents a generic methodology for development of risk indicators for petroleum installations and a specific set of risk indicators established for one offshore platform. The risk indicators should be used to control the risk during operation of platforms. The methodology is purely risk-based and the basis for development of risk indicators is the platform specific quantitative risk analysis (QRA). In order to identify high risk contributing factors, platform personnel are asked to assess whether and how much the risk influencing factors will change. A brief comparison of probabilistic safety assessment (PSA) for nuclear power plants and quantitative risk analysis (QRA) for petroleum platforms is also given. (au)

  13. Development of a Quality Control Procedure for Force Platforms

    OpenAIRE

    Browne, Jacinta; O'Hare, Neil

    2000-01-01

    A force platform is a technical method of quantitatively assessing balance indirectly. The use of force platforms in physiotherapy departments has become more prominent over the last few years. However, the main drawback in the use of force platforms is the lack of comprehensive calibration procedures, which casts doubt on the results obtained with these systems. Existing calibration tests are limited to testing the spatial accuracy of the force platform. This paper describes a comprehensive ...

  14. User definition and mission requirements for unmanned airborne platforms, revised

    Science.gov (United States)

    Kuhner, M. B.; Mcdowell, J. R.

    1979-01-01

    The airborne measurement requirements of the scientific and applications experiment user community were assessed with respect to the suitability of proposed strawman airborne platforms. These platforms provide a spectrum of measurement capabilities supporting associated mission tradeoffs such as payload weight, operating altitude, range, duration, flight profile control, deployment flexibility, quick response, and recoverability. The results of the survey are used to examine whether the development of platforms is warranted and to determine platform system requirements as well as research and technology needs.

  15. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    encapsulation can be visually modelled during product platform projects. A fundamental hypothesis in this project is that decision makers and important stakeholders have to be able to see the platform in order to manage it. Consequently, the thesis also investigates how visual models of important phenomena can...... two main purposes; First, various phenomena related to product platforms are investigated and secondly it is investigated how some of these phenomena can be visually modelled in order to support decision making in industrial platform projects. The investigation of platform phenomena is based on the...... support decision makers during a product platform project. The reaction from stakeholders in the case companies indicates that the decision base is improved by means of visual models. Another finding is that the sometimes rather theoretical and intangible phenomena can be instantiated in models and...

  16. Assessment of DICOM Viewers Capable of Loading Patient-specific 3D Models Obtained by Different Segmentation Platforms in the Operating Room.

    Science.gov (United States)

    Lo Presti, Giuseppe; Carbone, Marina; Ciriaci, Damiano; Aramini, Daniele; Ferrari, Mauro; Ferrari, Vincenzo

    2015-10-01

    Patient-specific 3D models obtained by the segmentation of volumetric diagnostic images play an increasingly important role in surgical planning. Surgeons use the virtual models reconstructed through segmentation to plan challenging surgeries. Many solutions exist for the different anatomical districts and surgical interventions. The possibility to bring the 3D virtual reconstructions with native radiological images in the operating room is essential for fostering the use of intraoperative planning. To the best of our knowledge, current DICOM viewers are not able to simultaneously connect to the picture archiving and communication system (PACS) and import 3D models generated by external platforms to allow a straight integration in the operating room. A total of 26 DICOM viewers were evaluated: 22 open source and four commercial. Two DICOM viewers can connect to PACS and import segmentations achieved by other applications: Synapse 3D® by Fujifilm and OsiriX by University of Geneva. We developed a software network that converts diffuse visual tool kit (VTK) format 3D model segmentations, obtained by any software platform, to a DICOM format that can be displayed using OsiriX or Synapse 3D. Both OsiriX and Synapse 3D were suitable for our purposes and had comparable performance. Although Synapse 3D loads native images and segmentations faster, the main benefits of OsiriX are its user-friendly loading of elaborated images and it being both free of charge and open source. PMID:25739346

  17. Platform Competition in Telecommunications

    OpenAIRE

    Church, Jeffrey; Gandal, Neil

    2004-01-01

    In this Paper we consider the economics of platform competition in telecommunications. Platform competition occurs when different, sometimes incompatible, technologies compete to provide telecommunications services to end-users. Battles between competing technologies have been an important feature of telecommunications in the last twenty or so years. Examples of platform competition in telecommunications include wireless vs. wireline networks, competing wireless options, such as satellite vs....

  18. Eclipse Platform Technical Overview

    OpenAIRE

    ALS-NSCORT,

    2003-01-01

    The Eclipse Platform is designed for building integrated development environments (IDEs) that can be used to create applications as diverse as web sites, embedded JavaTM programs, C++ programs, and Enterprise JavaBeansTM. This paper is a general technical introduction to the Eclipse Platform. Part I presents a technical overview of its architecture. Part II is a case study of how the Eclipse Platform was used to build a full-featured Java development environment. 20 pages Provider Notes...

  19. Constructing HSOC data platform

    International Nuclear Information System (INIS)

    HXMT is the only independent space astronomic secondary planet during 2006-2010 in China. Also it is the first independent astronomic secondary planet of China. HSOC, which is the data management sub-system, is the fundamental infrastructure of HXMT's scientific administration center. The data platform is the object of data management sub-system, which is an integrated platform supporting storage, share, exchange, query, statistics and management of data. The paper introduces the meaning and construction of HSOC data platform. (authors)

  20. Ability of combined Near-Infrared Spectroscopy-Intravascular Ultrasound (NIRS-IVUS) imaging to detect lipid core plaques and estimate cap thickness in human autopsy coronary arteries

    Science.gov (United States)

    Grainger, S. J.; Su, J. L.; Greiner, C. A.; Saybolt, M. D.; Wilensky, R. L.; Raichlen, J. S.; Madden, S. P.; Muller, J. E.

    2016-03-01

    The ability to determine plaque cap thickness during catheterization is thought to be of clinical importance for plaque vulnerability assessment. While methods to compositionally assess cap integrity are in development, a method utilizing currently available tools to measure cap thickness is highly desirable. NIRS-IVUS is a commercially available dual imaging method in current clinical use that may provide cap thickness information to the skilled reader; however, this is as yet unproven. Ten autopsy hearts (n=15 arterial segments) were scanned with the multimodality NIRS-IVUS catheter (TVC Imaging System, Infraredx, Inc.) to identify lipid core plaques (LCPs). Skilled readers made predictions of cap thickness over regions of chemogram LCP, using NIRS-IVUS. Artery segments were perfusion fixed and cut into 2 mm serial blocks. Thin sections stained with Movat's pentachrome were analyzed for cap thickness at LCP regions. Block level predictions were compared to histology, as classified by a blinded pathologist. Within 15 arterial segments, 117 chemogram blocks were found by NIRS to contain LCP. Utilizing NIRSIVUS, chemogram blocks were divided into 4 categories: thin capped fibroatheromas (TCFA), thick capped fibroatheromas (ThCFA), pathological intimal thickening (PIT)/lipid pool (no defined cap), and calcified/unable to determine cap thickness. Sensitivities/specificities for thin cap fibroatheromas, thick cap fibroatheromas, and PIT/lipid pools were 0.54/0.99, 0.68/0.88, and 0.80/0.97, respectively. The overall accuracy rate was 70.1% (including 22 blocks unable to predict, p = 0.075). In the absence of calcium, NIRS-IVUS imaging provided predictions of cap thickness over LCP with moderate accuracy. The ability of this multimodality imaging method to identify vulnerable coronary plaques requires further assessment in both larger autopsy studies, and clinical studies in patients undergoing NIRS-IVUS imaging.

  1. Platform decommissioning costs

    International Nuclear Information System (INIS)

    There are over 6500 platforms worldwide contributing to the offshore oil and gas production industry. In the North Sea there are around 500 platforms in place. There are many factors to be considered in planning for platform decommissioning and the evaluation of options for removal and disposal. The environmental impact, technical feasibility, safety and cost factors all have to be considered. This presentation considers what information is available about the overall decommissioning costs for the North Sea and the costs of different removal and disposal options for individual platforms. 2 figs., 1 tab

  2. Omnidirectional holonomic platforms

    International Nuclear Information System (INIS)

    This paper presents the concepts for a new family of wheeled platforms which feature full omnidirectionality with simultaneous and independently controlled rotational and translational motion capabilities. The authors first present the orthogonal-wheels concept and the two major wheel assemblies on which these platforms are based. They then describe how a combination of these assemblies with appropriate control can be used to generate an omnidirectional capability for mobile robot platforms. The design and control of two prototype platforms are then presented and their respective characteristics with respect to rotational and translational motion control are discussed

  3. Electro-bioremediation of Contaminated Sediment by Electrode Enhanced Capping

    OpenAIRE

    Yan, Fei; Reible, Danny

    2015-01-01

    In-situ capping often eliminates or slows natural degradation of hydrocarbon due to the reducing conditions in the sediments. The purpose of this research was to demonstrate a reactive capping technique, an electrode enhanced cap, to produce favorable conditions for hydrocarbon degradation and evaluate this reactive capping technique for contaminated sediment remediation. Two graphite electrodes were placed horizontally at different layers in a cap and connected to external power of 2 V. Redo...

  4. How does the antagonism between capping and anti-capping proteins affect actin network dynamics?

    International Nuclear Information System (INIS)

    Actin-based cell motility is essential to many biological processes. We built a simplified, three-dimensional computational model and subsequently performed stochastic simulations to study the growth dynamics of lamellipodia-like branched networks. In this work, we shed light on the antagonism between capping and anti-capping proteins in regulating actin dynamics in the filamentous network. We discuss detailed mechanisms by which capping and anti-capping proteins affect the protrusion speed of the actin network and the rate of nucleation of filaments. We computed a phase diagram showing the regimes of motility enhancement and inhibition by these proteins. Our work shows that the effects of capping and anti-capping proteins are mainly transmitted by modulation of the filamentous network density and local availability of monomeric actin. We discovered that the combination of the capping/anti-capping regulatory network with nucleation-promoting proteins introduces robustness and redundancy in cell motility machinery, allowing the cell to easily achieve maximal protrusion speeds under a broader set of conditions. Finally, we discuss distributions of filament lengths under various conditions and speculate on their potential implication for the emergence of filopodia from the lamellipodial network.

  5. How does the antagonism between capping and anti-capping proteins affect actin network dynamics?

    Science.gov (United States)

    Hu, Longhua; Papoian, Garegin A.

    2011-09-01

    Actin-based cell motility is essential to many biological processes. We built a simplified, three-dimensional computational model and subsequently performed stochastic simulations to study the growth dynamics of lamellipodia-like branched networks. In this work, we shed light on the antagonism between capping and anti-capping proteins in regulating actin dynamics in the filamentous network. We discuss detailed mechanisms by which capping and anti-capping proteins affect the protrusion speed of the actin network and the rate of nucleation of filaments. We computed a phase diagram showing the regimes of motility enhancement and inhibition by these proteins. Our work shows that the effects of capping and anti-capping proteins are mainly transmitted by modulation of the filamentous network density and local availability of monomeric actin. We discovered that the combination of the capping/anti-capping regulatory network with nucleation-promoting proteins introduces robustness and redundancy in cell motility machinery, allowing the cell to easily achieve maximal protrusion speeds under a broader set of conditions. Finally, we discuss distributions of filament lengths under various conditions and speculate on their potential implication for the emergence of filopodia from the lamellipodial network.

  6. How does the antagonism between capping and anti-capping proteins affect actin network dynamics?

    Energy Technology Data Exchange (ETDEWEB)

    Hu Longhua; Papoian, Garegin A, E-mail: gpapoian@umd.edu [Department of Chemistry and Biochemistry, University of Maryland, College Park, MD 20742 (United States)

    2011-09-21

    Actin-based cell motility is essential to many biological processes. We built a simplified, three-dimensional computational model and subsequently performed stochastic simulations to study the growth dynamics of lamellipodia-like branched networks. In this work, we shed light on the antagonism between capping and anti-capping proteins in regulating actin dynamics in the filamentous network. We discuss detailed mechanisms by which capping and anti-capping proteins affect the protrusion speed of the actin network and the rate of nucleation of filaments. We computed a phase diagram showing the regimes of motility enhancement and inhibition by these proteins. Our work shows that the effects of capping and anti-capping proteins are mainly transmitted by modulation of the filamentous network density and local availability of monomeric actin. We discovered that the combination of the capping/anti-capping regulatory network with nucleation-promoting proteins introduces robustness and redundancy in cell motility machinery, allowing the cell to easily achieve maximal protrusion speeds under a broader set of conditions. Finally, we discuss distributions of filament lengths under various conditions and speculate on their potential implication for the emergence of filopodia from the lamellipodial network.

  7. Analysis on the positioning precision of CAPS

    Institute of Scientific and Technical Information of China (English)

    JI YuanFa; SUN XiYan

    2009-01-01

    As a newly developed satellite positioning system,the Chinese Area Positioning System (CAPS) Is a typical direct sequence spread spectrum ranging system like GPS.The positioning precision of such navigation signals depends on many factors,including the pseudo-code rate,the signal to noise ratio,the processing methods for tracking loops and so on.This paper describes the CAPS link budget,the solution approach for CAPS positioning,focusing on the autocorrelation function feature of C/A code signals.The CAPS signal measurement precision is studied by the software approach together with theoretical analysis of the range resolution.Because the conventional Delay Lock Loop (DLL) is vulnerable to the impact of noise,a narrow correlator and multiple correlatore as well as the corresponding discrimination methods of phases are proposed,which improves the robustness of DLL and the code-phase resolution of the measurement.The results show that the Improvement of the DLL structure and the discrimination method are the most important way to improve the ranging resolution.Theoretical analysis and experimental results show that a CAPS receiver could reach a 20-m positioning precision by using three satellites with a supported height from an altimeter.

  8. Analysis on the positioning precision of CAPS

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    As a newly developed satellite positioning system, the Chinese Area Positioning System (CAPS) is a typical direct sequence spread spectrum ranging system like GPS. The positioning precision of such navigation signals depends on many factors, including the pseudo-code rate, the signal to noise ratio, the processing methods for tracking loops and so on. This paper describes the CAPS link budget, the solution approach for CAPS positioning, focusing on the autocorrelation function feature of C/A code signals. The CAPS signal measurement precision is studied by the software approach together with theoretical analysis of the range resolution. Because the conventional Delay Lock Loop (DLL) is vul- nerable to the impact of noise, a narrow correlator and multiple correlators as well as the corresponding discrimination methods of phases are proposed, which improves the robustness of DLL and the code-phase resolution of the measurement. The results show that the improvement of the DLL structure and the discrimination method are the most important way to improve the ranging resolution. Theoretical analysis and experimental results show that a CAPS receiver could reach a 20-m positioning precision by using three satellites with a supported height from an altimeter.

  9. Martian north polar cap summer water cycle

    CERN Document Server

    Brown, Adrian J; Becerra, Patricio; Byrne, Shane

    2016-01-01

    A key outstanding question in Martian science is 'are the polar caps gaining or losing mass and what are the implications for past, current and future climate?' To address this question, we use observations from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) of the north polar cap during late summer for multiple Martian years, to monitor the summertime water cycle in order to place quantitative limits on the amount of water ice deposited and sublimed in late summer. We establish here for the first time the summer cycle of water ice absorption band signatures on the north polar cap. We show that in a key region in the interior of the north polar cap, the absorption band depths grow until Ls=120, when they begin to shrink, until they are obscured at the end of summer by the north polar hood. This behavior is transferable over the entire north polar cap, where in late summer regions 'flip' from being net sublimating into net condensation mode. This transition or 'mode flip' happens earlier for ...

  10. Carbon nanotube cathode with capping carbon nanosheet

    Science.gov (United States)

    Li, Xin; Zhao, Dengchao; Pang, Kaige; Pang, Junchao; Liu, Weihua; Liu, Hongzhong; Wang, Xiaoli

    2013-10-01

    Here, we report a vertically aligned carbon nanotube (VACNT) film capped with a few layer of carbon nanosheet (FLCN) synthesized by chemical vapor deposition using a carbon source from iron phthalocyanine pyrolysis. The square resistance of the VACNT film is significantly reduced from 1500 Ω/□ to 300 Ω/□ when it is capped with carbon nanosheet. The VACNT capped with carbon nanosheet was transferred to an ITO glass substrate in an inverted configuration so that the carbon nanosheet served as a flexible transparent electrode at the bottom and the VACNT roots served as emission tips. Because all of the VACNTs start growing from a flat silicon substrate, the VACNT roots are very neat and uniform in height. A field emission test of the carbon nanosheet-capped VACNT film proved that the CNT roots show better uniformity in field emission and the carbon nanosheet cap could also potentially serve as a flexible transparent electrode, which is highly desired in photo-assisted field emission.

  11. [Experimental testing of centrally authorised medicinal products. The CAP programme].

    Science.gov (United States)

    Giess, S

    2014-10-01

    In addition to marketing authorisation, inspection and pharmacovigilance the experimental testing within the CAP programme provides another important instrument of assessing and testing centrally authorised medicinal products. Coordinated activities in European member states and institutions--including planning, sampling, lab testing, reporting and assessment of results--allow us to establish an effective quality control system for this group of innovative medicinal products. By means of using existing networks and national structures, unnecessary parallel sampling and testing can be avoided, and limited resources can be used in a better way. The CAP programme is an independent test and surveillance programme, which demonstrates the high quality of centrally authorised medicinal products in the EU/EEA. That way, it strengthens the confidence of patients and the public in these innovative medicinal products. Furthermore, it enables OMCLs to gain experience with new sensitive analytical methods, which can also be used in other areas, for example for the identification of counterfeits or the assessment of biosimilars and generics. PMID:25159224

  12. Cross-Platform Assessment of Genomic Imbalance Confirms the Clinical Relevance of Genomic Complexity and Reveals Loci with Potential Pathogenic Roles in Diffuse Large B-Cell Lymphoma

    Science.gov (United States)

    Dias, Lizalynn M.; Thodima, Venkata; Friedman, Julia; Ma, Charles; Guttapalli, Asha; Mendiratta, Geetu; Siddiqi, Imran N.; Syrbu, Sergei; Chaganti, R. S. K.; Houldsworth, Jane

    2016-01-01

    Genomic copy number alterations (CNAs) in diffuse large B-cell lymphoma (DLBCL) have roles in disease pathogenesis but overall clinical relevance remains unclear. Herein, an unbiased algorithm was uniformly applied across three genome profiling datasets comprising 392 newly-diagnosed DLBCL specimens that defined 32 overlapping CNAs, involving 36 minimal common regions (MCRs). Scoring criteria were established for 50 aberrations within the MCRs while considering peak gains/losses. Application of these criteria to independent datasets revealed novel candidate genes with coordinated expression, such as CNOT2, potentially with pathogenic roles. No one single aberration significantly associated with patient outcome across datasets, but genomic complexity, defined by imbalance in more than one MCR, significantly portended adverse outcome in two of three independent datasets. Thus, the standardized scoring of CNAs currently developed can be uniformly applied across platforms, affording robust validation of genomic imbalance and complexity in DLBCL and overall clinical utility as biomarkers of patient outcome. PMID:26294112

  13. EURESCOM Services Platform

    NARCIS (Netherlands)

    Nieuwenhuis, Lambert J.M.; Halteren, van Aart

    1999-01-01

    This paper presents the results of the EURESCOM Project 715. In February 1999, a large team of researchers from six European public network operators completed a two year period of cooperative experiments on a TINA-based environment, called the EURESCOM Services Platform (ESP). This platform consist

  14. Continuous Platform Development

    DEFF Research Database (Denmark)

    Nielsen, Ole Fiil

    low risks and investments but also with relatively fuzzy results. When looking for new platform projects, it is important to make sure that the company and market is ready for the introduction of platforms, and to make sure that people from marketing and sales, product development, and downstream...

  15. Dynamic Interaction between Cap & Trade and Electricity Markets

    Science.gov (United States)

    Jeev, Kumar

    Greenhouse Gases (GHG), such as Carbon-Dioxide (CO2), which is released in the atmosphere due to anthropogenic activities like power production, are now accepted as the main culprits for global warming. The Regional Greenhouse Gas Initiative (RGGI), an initiative of the North East and Mid-Atlantic States of the United States (US) for limiting the emission of GHG, has developed a regional cap-and-trade program for CO2 emissions for power plants. Existing cap-and-trade programs in US and Europe for Greenhouse Gases have recently been plagued by over-allocation. Carbon prices recently collapsed in all these markets during the global recession. Since then, there have been significant policy changes, which have resulted in the adoption of aggressive emission cap targets by most major carbon emission markets. This is expected to make carbon emissions availability more restrictive, raising the prices of these credits. These emissions markets are expected to have a major impact on the wholesale electricity markets. Two models to study the interaction of these two markets are presented. These models assess the impact of the emissions market on wholesale electricity prices. The first model characterizes the competition between two types of power plants (coal and gas) in both the electricity and emissions markets as a dynamic game using the Cournot approximation. Under this approximation, we find that in the Nash equilibrium the plants increase their permit allocation to high-demand periods and the marginal value of each credit for a plant is identical in all periods under their optimal equilibrium strategy. The second numerical model allows us to explicitly evaluate the closed loop equilibrium of the dynamic interaction of two competitors in these markets. We find that plants often try to corner the market and push prices all the way to the price cap. Power plants derive most of their profits from these extreme price regimes. In the experiments where trading is allowed

  16. Climate News Across Media Platforms

    DEFF Research Database (Denmark)

    Eskjær, Mikkel Fugl

    2015-01-01

    change news on five different media platforms: newspapers, television, radio, web-news and mobile news. It investigates the themes and actors represented in public climate change communication as well as the diverse possibilities of participating in public debates and information sharing. By combining......In a changing media landscape marked by technological, institutional and cultural convergence, comparative and cross-media content analysis represents a valuable analytical tool in mapping the diverse channels of climate change communication. This paper presents a comparative study of climate...... quantitative and qualitative content analysis the paper documents and explores the extent and character of climate change news across different media platforms. The study aims at contributing to the on-going assessment of how news media are addressing climate change at a time when old and new media are...

  17. Product Platform Replacements

    DEFF Research Database (Denmark)

    Sköld, Martin; Karlsson, Christer

    2012-01-01

    shed light on this unexplored and growing managerial concern, the purpose of this explorative study is to identify operational challenges to management when product platforms are replaced. Design/methodology/approach – The study uses a longitudinal field-study approach. Two companies, Gamma and Omega......Purpose – It is argued in this article that too little is known about product platforms and how to deal with them from a manager's point of view. Specifically, little information exists regarding when old established platforms are replaced by new generations in R&D and production environments. To...... distinguishing between platform replacement “height” and “width”. Seven groups of managerial measures for dealing with the issues are recommended. Originality/value – The study aims to contribute to the existing literature by taking a managers' perspective of product platform development. Its specific...

  18. Seismic explosion sources on an ice cap

    DEFF Research Database (Denmark)

    Shulgin, Alexey; Thybo, Hans

    2015-01-01

    Controlled source seismic investigation of crustal structure below ice covers is an emerging technique. We have recently conducted an explosive refraction/wide-angle reflection seismic experiment on the ice cap in east-central Greenland. The data-quality is high for all shot points and a full...... crustal model can be modelled. A crucial challenge for applying the technique is to control the sources. Here, we present data that describe the efficiency of explosive sources in the ice cover. Analysis of the data shows, that the ice cap traps a significant amount of energy, which is observed as a...

  19. Design and implementation of the CAPS receiver

    Institute of Scientific and Technical Information of China (English)

    HU YongHui; HUA Yu; HOU Lei; WEI JingFa; WU JianFeng

    2009-01-01

    In this paper,baaed on analyses of the Chinese Area Positioning System (CAPS) satellite (GEO satellite) resources and signal properties,the signal power at the port of the receiver antenna is estimated,and the implementation projects are presented for a switching band C to band L CAPS C/A code receiver integrated with GPS receiver suite and for a CAPS dual frequency P code receiver.A microstrip receiving antenna is designed with high sensitivity and wide beam orientation,the RF front end of the C/A code and P code receivers,and a processor is designed for the navigation baseband.A single frequency CAPS C/A code receiver and a CAPS dual frequency P code receiver are built at the same time.A software process flow is provided,and research on relatively key techniques is also conducted,such as signal searching,code loop and carrier loop algorithms,a height assistant algorithm,a dual frequency difference speed measurement technique,a speed measurement technique using a single frequency source with frequency assistance,and a CAPS time correcting algorithm,according to the design frame of the receiver hardware.Research results show that the static plane positioning accuracy of the CAPS C/A code receiver is 20.5-24.6 m,height accuracy is 1.2-12.8 m,speed measurement accuracy is 0.13-0.3 m/s,dynamic plane positioning accuracy is 24.4 m,height accuracy is 3.0 m,and speed measurement accuracy is 0.24 m/s.In the case of C/A code,the timing accuracy is 200 ha,and it is also shown that the positioning accuracy of the CAPS precise code receiver (1σ) is 5 m from south to north,and 0.8 m from east to west.Finally,research on positioning accuracy is also conducted.

  20. Assembling the CMS yoke end-caps

    CERN Multimedia

    Laurent Guiraud

    2001-01-01

    A crane is used to piece together one of the end-caps that will provide the path for magnetic flux return on the CMS experiment. A total of six end-cap discs will be assembled before being positioned on the barrel yoke to complete the huge 12 500 tonne cylinder yoke. The magnetic field produced will be greater than any other solenoid created to date at 4 T, 100 000 times greater than the Earth's natural magnetic field, and will store enough energy to melt 18 tonnes of gold.

  1. Studies of cervical caps: I. Vaginal lesions associated with use of the Vimule cap.

    Science.gov (United States)

    Bernstein, G S; Kilzer, L H; Coulson, A H; Nakamura, R M; Smith, G C; Bernstein, R; Frezieres, R; Clark, V A; Coan, C

    1982-11-01

    Prior to investigating the contraceptive efficacy of cervical caps, we undertook a preliminary study to evaluate potential side effects of these devices. Women who had not previously used a cap were randomly assigned to wear either a Vimule or Cavity Rim Cap (CRC) for as long as seven days. The Vimule cap caused lesions of the portio vaginalis ranging from erythematous impressions to abrasions and frank lacerations. There was variation in the degree of trauma depending, in part, on the size of the cap and duration of wear. Disruption of the epithelium occurred in eight of twelve Vimule users, but the lesions were sometimes difficult to see owing to their location. CRCs were worn by 20 women. This device sometimes left a "suction ring" on the cervix but did not disrupt the epithelium. Two of three long-term users of the Vimule cap who were also studied had unusual formations of the vaginal mucosa suggesting a proliferative reaction to chronic irritation. It is recommended that all women using a Vimule Cap be carefully re-examined and counseled about further use of the device according to the findings of the examination. PMID:7160179

  2. A critical evaluation of social impact assessment methodologies and a call to measure economic and social impact holistically through the External Rate of Return platform

    OpenAIRE

    Florman, Mark; Vidra, Robyn Klingler; Facada, Martim Jacinto

    2016-01-01

    Companies, investors, international organisations and non-governmental organisations have designed frameworks and tools for measuring the social impact of business. In this report we evaluate the landscape of existing social impact assessment methods. We first delineate the characteristics, context and development of leading methodologies. We then critically evaluate the strengths and weaknesses of today’s leading social impact assessment methodologies. We identify the strengths of existing a...

  3. ALTERNATE REDUCTANT COLD CAP EVALUATION FURNACE PHASE II TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, F.; Stone, M.; Miller, D.

    2014-09-03

    Savannah River Remediation (SRR) conducted a Systems Engineering Evaluation (SEE) to determine the optimum alternate reductant flowsheet for the Defense Waste Processing Facility (DWPF). Specifically, two proposed flowsheets (nitric–formic–glycolic and nitric–formic–sugar) were evaluated based upon results from preliminary testing. Comparison of the two flowsheets among evaluation criteria indicated a preference towards the nitric–formic–glycolic flowsheet. Further research and development of this flowsheet eliminated the formic acid, and as a result, the nitric–glycolic flowsheet was recommended for further testing. Based on the development of a roadmap for the nitric–glycolic acid flowsheet, Waste Solidification Engineering (WS-E) issued a Technical Task Request (TTR) to address flammability issues that may impact the implementation of this flowsheet. Melter testing was requested in order to define the DWPF flammability envelope for the nitric-glycolic acid flowsheet. The Savannah River National Laboratory (SRNL) Cold Cap Evaluation Furnace (CEF), a 1/12th scale DWPF melter, was selected by the SRR Alternate Reductant project team as the melter platform for this testing. The overall scope was divided into the following sub-tasks as discussed in the Task Technical and Quality Assurance Plan (TTQAP):  Phase I - A nitric–formic acid flowsheet melter test (unbubbled) to baseline the CEF cold cap and vapor space data to the benchmark melter flammability models;  Phase II - A nitric–glycolic acid flowsheet melter test (unbubbled and bubbled) to: o Define new cold cap reactions and global kinetic parameters in support of the melter flammability model development; o Quantify off-gas surging potential of the feed; o Characterize off-gas condensate for complete organic and inorganic carbon species. After charging the CEF with cullet from Phase I CEF testing, the melter was slurry-fed with glycolic flowsheet based SB6-Frit 418 melter feed at 36

  4. The Effectiveness of Caps on Political Lobbying

    NARCIS (Netherlands)

    Matejka, M.; Onderstal, A.M.; De Waegenaere, A.M.B.

    2002-01-01

    In this paper, we analyze a lobby game, modelled as an all-pay auction in which interest groups submit bids in order to obtain a political prize.The bids are restricted to be below a cap imposed by the government.For both an incomplete and a complete information setting we show the following results

  5. Successful treatment of cap polyposis with infliximab.

    Science.gov (United States)

    Bookman, Ian D; Redston, Mark S; Greenberg, Gordon R

    2004-06-01

    Cap polyposis is a disorder characterized by bloody diarrhea with rectosigmoid polyps covered by a cap of fibropurulent exudate. The pathogenesis is unknown, but histological features suggest that mucosal prolapse may play a role. Drug therapies are usually unsuccessful, and treatment requires sigmoid resection or, if the disease recurs after initial surgical resection, panproctocolectomy. We report the case of a 36-year-old woman with characteristic clinical, endoscopic, and histological features of cap polyposis. Investigations included normal anorectal manometry and defecography, without evidence of prolapse. The patient's disease was unresponsive to treatment with mesalamine, antibiotics, lidocaine enemas, and corticosteroids. One infusion of infliximab 5 mg/kg provided dramatic symptomatic improvement but minimal endoscopic or histological change. After 4 infliximab infusions at 8-week intervals, endoscopy of the rectum and sigmoid colon was normal, and biopsies showed complete histological resolution of the inflammatory process. Well-being with normal endoscopy and histology has been maintained at 38 months, without further treatment. It was concluded that infliximab is effective therapy for cap polyposis and avoids the requirement for surgery. No clinical evidence was obtained to support mucosal prolapse as a causative factor, but the response to infliximab suggests a role for tumor necrosis factor-alpha in the pathogenesis of this disorder. PMID:15188181

  6. Mapping of p140Cap phosphorylation sites

    DEFF Research Database (Denmark)

    Repetto, Daniele; Aramu, Simona; Boeri Erba, Elisabetta;

    2013-01-01

    Protein phosphorylation tightly regulates specific binding of effector proteins that control many diverse biological functions of cells (e. g. signaling, migration and proliferation). p140Cap is an adaptor protein, specifically expressed in brain, testis and epithelial cells, that undergoes phosp...

  7. Knowledge Management at Cap Gemini Nederland

    NARCIS (Netherlands)

    M.J. Vlaanderen (Marie Jose)

    1998-01-01

    textabstractThe theme of this paper is knowledge management (KM) at an organization that provides information technology (IT) services. It is based on the results of a KM-survey of the Finance Division of Cap Gemini (CG) conducted during the spring of 1997.

  8. INTERNATIONAL WHEAT PRICE TRANSMISSION AND CAP REFORM

    OpenAIRE

    Thompson, Stanley R.; Bohl, Martin T.

    1999-01-01

    We illustrate how CAP policy reforms influence the transmission of world prices to domestic markets. Monthly wheat price data in Germany are used to obtain price transmission elasticities. Correctly accounting for structural breaks and the time series properties of the data yield transmission elasticities that differ dramatically among policy regimes.

  9. ATLAS: End-cap Toroid assembly

    CERN Multimedia

    CERN Audiovisual Unit

    2006-01-01

    In building 191 and building 180- assembly of this massive piece.To reach the top of the end-cap the cranes has to be used and during the assembly you can see welding and hear many tools running background.

  10. Developing a social media platform for nurses.

    Science.gov (United States)

    Jackson, Jennifer; Kennedy, Maggie

    2015-11-18

    Social media tools provide opportunities for nurses to connect with colleagues and patients and to advance personally and professionally. This article describes the process of developing an innovative social media platform at a large, multi-centre teaching hospital, The Ottawa Hospital, Canada, and its benefits for nurses. The platform, TOH Nurses, was developed using a nursing process approach, involving assessment, planning, implementation and evaluation. The aim of this initiative was to address the barriers to communication inherent in the large number of nurses employed by the organisation, the physical size of the multi-centre hospital and the shift-work nature of nursing. The platform was used to provide educational materials for clinical nurses, and to share information about professional practice. The implications of using a social media platform in a healthcare setting were considered carefully during its development and implementation, including concerns regarding privacy and confidentiality. PMID:26576914

  11. An accuracy assessment of the CALIOP/CALIPSO version 2 aerosol extinction product based on a detailed multi-sensor, multi-platform case study

    Directory of Open Access Journals (Sweden)

    M. Kacenelenbogen

    2010-11-01

    Full Text Available The Cloud Aerosol LIdar with Orthogonal Polarization (CALIOP, on board the CALIPSO platform, has measured profiles of total attenuated backscatter coefficient (level 1 products since June 2006. CALIOP's level 2 products, such as the aerosol backscatter and extinction coefficient profiles, are retrieved using a complex succession of automated algorithms. The goal of this study is to help identify potential shortcomings in the CALIOP version 2 level 2 aerosol extinction product and to illustrate some of the motivation for the changes that will be introduced in the next version of CALIOP data (version 3, currently being processed. As a first step, we compared CALIOP version 2-derived AOD with the collocated MODerate Imaging Spectroradiometer (MODIS AOD retrievals over the Continental United States. The best statistical agreement between those two quantities was found over the Eastern part of the United States with, nonetheless, a weak correlation (R ~0.4 and an apparent CALIOP version 2 underestimation (by ~66% of MODIS AOD. To help quantify the potential factors contributing to the uncertainty of the CALIOP aerosol extinction retrieval, we then focused on a one-day, multi-instrument, multiplatform comparison study during the CALIPSO and Twilight Zone (CATZ validation campaign on August 04, 2007. This case study illustrates the following potential reasons for a bias in the CALIOP AOD: (i CALIOP's low signal-to-noise ratio (SNR leading to the misclassification and/or lack of aerosol layer identification, especially close to the Earth's surface; (ii the cloud contamination of CALIOP version 2 aerosol backscatter and extinction profiles; (iii potentially erroneous assumptions of the backscatter-to-extinction ratio (Sa used in CALIOP's extinction retrievals; and (iv calibration coefficient biases in the CALIOP daytime attenuated backscatter coefficient profiles.

  12. The Creative Platform

    DEFF Research Database (Denmark)

    Byrge, Christian; Hansen, Søren

    This book is about introducing more creativity into general educational courses and cross-disciplinary activities. It is directed toward teachers at all levels in the educational system, but the Creative Platform is a general model, and thus the creative process will fundamentally be the same...... whether you consider thirdgrade teaching, human-resource development, or radical new thinking in product development in a company. The Creative Platform was developed at Aalborg University through a series of research-and-development activities in collaboration with educational institutions and private...... companies. It is a project in which the goal is to make a hands-on approach to a knowledge perspective on enhancing creativity. The underlying ambition of the Creative Platform is to make it easier to promote creativity. At www.uka.aau.dk/The+Creative+Platform, you can find extra materials and instructions...

  13. USA Hire Testing Platform

    Data.gov (United States)

    Office of Personnel Management — The USA Hire Testing Platform delivers tests used in hiring for positions in the Federal Government. To safeguard the integrity of the hiring processes and ensure...

  14. "Platform" innovative educational technology

    OpenAIRE

    Klimashova Yuliya Igorevna

    2015-01-01

    This article reflects the main aspects of "Platform" innovative education technology, determines the theoretical and practical components of the technology, and describes the results of its application in the educational process.

  15. EPA Geospatial Platform

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Geospatial Platform is a shared infrastructure that a suite of geospatial tools, data and services that helps coordinate and consolidate mapping activities,...

  16. Stable Research Platform Workshop

    OpenAIRE

    Fisher, F H; Bishop, C B

    1988-01-01

    A workshop on stable oceanographic research platforms was held at the Marine Physical Laboratory June 29-30, 1987. Research needs of several scientific disciplines, including physical oceanography, air-sea interaction, biological oceanography (especially bio-optics), and acoustics were discussed in detail with respect to the advantages of various stable platforms. This workshop was stimulated by recent requests involving the use of FLIP in weather conditions beyond its original capab...

  17. Innovating Platform Business Models

    OpenAIRE

    Moser, Daniel; Gassmann, Oliver

    2016-01-01

    Digitalization, connected products and services, and shortening innovation cycles are widely discussed topics in management practice and theory and demand for new concepts. Platforms are such a concept and find successively entry into a growing number of companies. However, research did not yet address how business models for platforms can be innovated. Thus, we build on a multi-case study and analyze how three major companies, Amazon, Apple and Google innovated their business models. We foun...

  18. ARM for Platform Application

    Science.gov (United States)

    Patte, Mathieu; Poupat, Jean-Luc; Le Meur, Patrick

    2015-09-01

    The activities described in this paper are part of the CNES R&T “Study of a Cortex-R ARM based architecture” performed by Airbus DS Space System & Electronics in 2014. With the support of CNES, Airbus DS has performed the porting of a representative space application software on an ARM based demonstration platform. This paper presents the platform itself, the activities performed at software level and the first results on this evaluation study.

  19. Characterization of a High-Level Waste Cold Cap in a Laboratory-Scale Melter

    International Nuclear Information System (INIS)

    The feed, slurry or calcine, is charged to the melter from above. The conversion of the melter feed to molten glass occurs within the cold cap, a several centimeters thin layer of the reacting material blanketing the surface of the melt. Between the cold-cap top, which is covered by boiling slurry, and its bottom, where bubbles separate it from molten glass, the temperature changes by ∼900 .deg. C. The heat is delivered to the cold cap from the melt that is stirred mainly by bubbling. The feed contains oxides, hydroxides, acids, inorganic salts and organic materials. On heating, these components react, releasing copious amounts of gases, while molten salts decompose, glass-forming melt is generated, and crystalline phases precipitate and dissolve in the melt. Most of these processes have been studied in detail and became sufficiently understood for a mathematical model to represent the heat and mass transfer within the cold cap. This allows US to relate the rate of melting to the feed properties. While the melting reactions can be studied, and feed properties, such as heat conductivity and density, measured in the laboratory, the actual cold-cap dynamics, as it evolves in the waste glass melter, is not accessible to direct investigation. Therefore, to bridge the gap between the laboratory crucible and the waste glass melter, we explored the cold cap formation in a laboratory-scale melter (LSM) and studied the structure of quenched cold caps. The LSM is a suitable tool for investigating the cold cap. The cold cap that formed in the LSM experiments exhibited macroscopic features observed in scaled melters, as well as microscopic features accessible through laboratory studies and mathematical modeling. The cold cap consists of two main layers. The top layer contains solid particles dissolving in the glass-forming melt and open shafts through which gases are escaping. The bottom layer contains bubbly melt or foam where bubbles coalesce into larger cavities that move

  20. Student Performance and Success Factors in Learning Business Statistics in Online vs. On-Ground Classes Using a Web-Based Assessment Platform

    Science.gov (United States)

    Shotwell, Mary; Apigian, Charles H.

    2015-01-01

    This study aimed to quantify the influence of student attributes, coursework resources, and online assessments on student learning in business statistics. Surveys were administered to students at the completion of both online and on-ground classes, covering student perception and utilization of internal and external academic resources, as well as…

  1. Facially amphiphilic thiol capped gold and silver nanoparticles

    Indian Academy of Sciences (India)

    Shreedhar Bhata; Uday Maitra

    2008-11-01

    A series of bile acid-derived facially amphiphilic thiols have been used to cap sliver and gold nanoparticles. The self-assembling properties of these steroid-capped nanoparticles have been investigated and reported in this article.

  2. Facially amphiphilic thiol capped gold and silver nanoparticles

    OpenAIRE

    Bhat, Shreedhar; Maitra, Uday

    2008-01-01

    A series of bile acid-derived facially amphiphilic thiols have been used to cap sliver and gold nanoparticles. The self-assembling properties of these steroid-capped nanoparticles have been investigated and reported in this article.

  3. How the House of Morgan Cooperated to Develop the Large-Cap US Multinational Corporation, 1895-1913

    OpenAIRE

    Sawe, Joseph

    2015-01-01

    The following investigation is intended to determine how the large-cap US multinational corporation was further advanced during the pivotal years of 1895-1913 by a leading private unincorporated institution—House of Morgan. Historical review and assessment focused on the broader US society, government, monetary landscape, the House of Morgan, leading large cap US multinationals; looking at both the key organizations and underlying people in power. The report framework focuses upon the develop...

  4. The cervical cap. An alternate barrier contraceptive method.

    Science.gov (United States)

    Gilbirds, W M; Jonas, H S

    1982-04-01

    The cervical cap is examined as an acceptable addition to barrier method technology. Attention is directed to its history, methodology, contradindications and side effects, effectiveness, and areas of current research. Invention of the modern cervical cap occurred in the mid-1800s. Finch reports that the 1st cervical cap was described in 1838 by Frederick Adolphe Wilde, a German gynecologist. He called it a Cautchuk Pessarium, and each cap was custom made from a wax impression of the woman's cervix. No matter who is credited with the invention of the cap, it remained a widely used method of contraception for the next century although principally employed in Europe. Currently, cervical caps are widely used in England and Central Europe. Use of the cap in the U.S. has been limited by the small amount of data on its demonstrated effectiveness as well as most clinican's belief that the method is too complicated for the "average woman." There are 2 primary types of cervical caps: firm and soft rubber. For the cap to be effective, it must be fitted by trained medical personnel. For maximum effectiveness, it is essential that the cervical cap user master the techniques of self insertion and removal. Most sources recommend that prior to insertion, the cap be approximately 1/3 filled with spermicidal cream or jelly. Whether or not a spermicide is used, the woman assumes a semi-reclining or squatting position. Removal of the cap is facilitated by inserting the index and middle fingers into the vagina and tiling the rim of the cap away from the cervix, thus breaking the suction. The cap can then be easily removed via the inserted fingers. The following conditions contraindicate the use of the cervical cap: cervical erosion or laceration; cervical malformation; Nabothian cysts; inflammation of the adnexa or inability of the woman to place and remove the cap correctly. The only reported side effect of the cap is the presence of a malodorous secretion if the cap is left in place

  5. Imaging and analysis of microcalcifications and lipid/necrotic core calcification in fibrous cap atheroma.

    Science.gov (United States)

    Maldonado, Natalia; Kelly-Arnold, Adreanne; Laudier, Damien; Weinbaum, Sheldon; Cardoso, Luis

    2015-06-01

    The presence of microcalcifications (µCalcs) >5 µm within the cap of human fibroatheroma has been shown to produce a 200-700% increase in peak circumferential stress, which can transform a stable plaque into a vulnerable one, whereas µCalcs 5 µm based on the gross morphological features of fibroatheromas, and the correlation between the size and distribution of µCalcs in the cap and the calcification in the lipid/necrotic core beneath it. Atherosclerotic lesions (N = 72) were imaged using HR-μCT at 2.1-μm resolution for detailed analysis of atheroma morphology and composition, and validated using non-decalcified histology. At 2.1-μm resolution one observes four different patterns of calcification within the lipid/necrotic core, and is able to elucidate the 3D spatial progression of the calcification process using these four patterns. Of the gross morphological features identified, only minimum cap thickness positively correlated with the existence of µCalcs > 5 µm in the cap. We also show that µCalcs in the cap accumulate in the vicinity of the lipid/necrotic core boundary with few on the lumen side of the cap. HR-μCT enables three-dimensional assessment of soft tissue composition, lipid content, calcification patterns within lipid/necrotic cores and analysis of the axial progression of calcification within individual atheroma. The distribution of µCalcs within the cap is highly non-uniform and decreases sharply as one proceeds from the lipid pool/necrotic core boundary to the lumen. PMID:25837377

  6. Exploring plasmonic coupling in hole-cap arrays

    OpenAIRE

    Schmidt, Thomas M.; Maj Frederiksen; Vladimir Bochenkov; Sutherland, Duncan S

    2015-01-01

    The plasmonic coupling between gold caps and holes in thin films was investigated experimentally and through finite-difference time-domain (FDTD) calculations. Sparse colloidal lithography combined with a novel thermal treatment was used to control the vertical spacing between caps and hole arrays and compared to separated arrays of holes or caps. Optical spectroscopy and FDTD simulations reveal strong coupling between the gold caps and both Bloch Wave-surface plasmon polariton (BW-SPP) modes...

  7. Modeling bubbly-cap flows using two-group average bubble number density

    International Nuclear Information System (INIS)

    The basic concept of two-group average bubble number density equations along with three-fluid model has been demonstrated for vertical gas-liquid flow. Specifically, the current study focused on: (i)classification of bubble interaction between spherical bubbles (Group-1) and cap bubbles (Group- 2), (ii) preliminary consideration of source and sink terms in the averaged bubble number density equations via the model of Hibiki and Ishii [1] and (iii) assessment by means of experimental data sets at bubbly-to-cap flow transition. Reasonable agreement was achieved between measured and predicted distributions of void fraction, interfacial area concentration (IAC) and volume equivalent bubble diameter. (author)

  8. Design of CAP1400 reactor internals flow-induced vibration simulation test model

    International Nuclear Information System (INIS)

    While the first CAP1400 reactor internals is defined as a 'prototype', it is necessary to carry out the reactor internals flow-induced vibration simulation test for verifying the structure integrity of reactor internals and providing data for vibration assessment of CAP1400 reactor internals. The reactor internals flow-induced vibration simulation test is usually a reduced scale model test. This paper describes in detail the main factors of model scale, similarity criterion and the simplification of test model. The simplification of model will not only reduce the fabrication cost, but also obtain more accurate test data from the flow-induced vibration simulation test. (authors)

  9. CMS end-cap yoke at the detector's assembly site.

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The magnetic flux generated by the superconducting coil in the CMS detector is returned via an iron yoke comprising three end-cap discs at each end (end-cap yoke) and five concentric cylinders (barrel yoke). This picture shows the first of three end-cap discs (red) seen through the outer cylinder of the vacuum tank which will house the superconducting coil.

  10. The ESA Geohazard Exploitation Platform

    Science.gov (United States)

    Bally, Philippe; Laur, Henri; Mathieu, Pierre-Philippe; Pinto, Salvatore

    2015-04-01

    Earthquakes represent one of the world's most significant hazards in terms both of loss of life and damages. In the first decade of the 21st century, earthquakes accounted for 60 percent of fatalities from natural disasters, according to the United Nations International Strategy for Disaster Reduction (UNISDR). To support mitigation activities designed to assess and reduce risks and improve response in emergency situations, satellite EO can be used to provide a broad range of geo-information services. This includes for instance crustal block boundary mapping to better characterize active faults, strain rate mapping to assess how rapidly faults are deforming, soil vulnerability mapping to help estimate how the soil is behaving in reaction to seismic phenomena, geo-information to assess the extent and intensity of the earthquake impact on man-made structures and formulate assumptions on the evolution of the seismic sequence, i.e. where local aftershocks or future main shocks (on nearby faults) are most likely to occur. In May 2012, the European Space Agency and the GEO Secretariat convened the International Forum on Satellite EO for Geohazards now known as the Santorini Conference. The event was the continuation of a series of international workshops such as those organized by the Geohazards Theme of the Integrated Global Observing Strategy Partnership. In Santorini the seismic community has set out a vision of the EO contribution to an operational global seismic risk program, which lead to the Geohazard Supersites and Natural Laboratories (GSNL) initiative. The initial contribution of ESA to suuport the GSNL was the first Supersites Exploitation Platform (SSEP) system in the framework of Grid Processing On Demand (GPOD), now followed by the Geohazard Exploitation Platform (GEP). In this presentation, we will describe the contribution of the GEP for exploiting satellite EO for geohazard risk assessment. It is supporting the GEO Supersites and has been further

  11. NetCAP status report for the end of fiscal year 2010.

    Energy Technology Data Exchange (ETDEWEB)

    Hamlet, Benjamin Roger; Young, Christopher John

    2010-10-01

    Fiscal year 2010 (FY10) is the second full year of NetCAP development and the first full year devoted largely to new feature development rather than the reimplementation of existing capabilities found in NetSim (Sereno et al., 1990). Major tasks completed this year include: (1) Addition of hydroacoustic simulation; (2) Addition of event Identification simulation; and (3) Initial design and preparation for infrasound simulation. The Network Capability Assessment Program (NetCAP) is a software tool under development at Sandia National Laboratories used for studying the capabilities of nuclear explosion monitoring networks. This report discusses motivation and objectives for the NetCAP project, lists work performed prior to fiscal year 2010 (FY10) and describes FY10 accomplishments in detail.

  12. Immunity conferred by an experimental vaccine based on the recombinant PCV2 Cap protein expressed in Trichoplusia ni-larvae.

    Science.gov (United States)

    Pérez-Martín, Eva; Gómez-Sebastián, Silvia; Argilaguet, Jordi M; Sibila, Marina; Fort, María; Nofrarías, Miquel; Kurtz, Sherry; Escribano, José M; Segalés, Joaquim; Rodríguez, Fernando

    2010-03-01

    Porcine circovirus type 2 (PCV2) vaccination has been recently included as a measure to control postweaning multisystemic wasting syndrome (PMWS) in the field. Aiming to obtain a more affordable vaccine to be extensively implemented in the field, a highly efficient non-fermentative expression platform based on Trichoplusia ni (T. ni) larvae was used to produce a baculovirus-derived recombinant PCV2 Cap protein (rCap) for vaccine purposes. Vaccination of pigs with rCap induced solid protection against PCV2 experimental infection, inhibiting both the viremia and the viral shedding very efficiently. The protection afforded by the rCap vaccine strongly correlated with the induction of specific humoral immune responses, even in the presence of PCV2-specific maternal immunity, although cellular responses also seemed to play a partial role. In summary, we have shown that rCap expressed in T. ni larvae could be a cost-effective PCV2 vaccine candidate to be tested under field conditions. PMID:20056179

  13. Suppression of phosphorus release from sediments using water clarifier sludge as capping material.

    Science.gov (United States)

    Ichihara, Makiko; Nishio, Takayuki

    2013-01-01

    Water clarifier sludge was assessed as a capping material for preventing release of phosphorus from eutrophic pond sediments. Sediment incubation experiments were carried out over two months using five capping materials (sludge, sludge sintered respectively at 200, 400 and 600 degrees C, and sea sand) to evaluate the effect of sintering temperature. We also examined reduction in the nitrogen eluted from the sludge. Sludge, sludge sintered at 400 and 600 degrees C, and sea sand suppressed phosphorus release from sediments into the overlying water, whereas sludge and sludge sintered at 200 degrees C increased nitrogen release relative to that without capping. Sludge sintered at 600 degrees C was the most effective in reducing total nitrogen (TN) flux. Our experiments revealed that nitrogen and organic substances must be removed completely from sludge in order to avoid their release. The phosphate removal efficiency of sludge (including sintered sludge) was expressed in terms of Freundlich adsorption isotherms. The results showed that sludge sintered at 600 degrees C was suitable for use as a capping material since (1) its organic content (ignition loss) and TN were low (1.1% and 0.014 mg g(-1) dry, respectively), (2) its phosphorus adsorption capacity was 2.2 times higher than that ofunsintered sludge, and (3) it was effective in suppressing the diffusion of phosphorus and NH4+-N from sediments when used as a capping material. PMID:24350484

  14. Modeling of inactivation of surface borne microorganisms occurring on seeds by cold atmospheric plasma (CAP)

    Science.gov (United States)

    Mitra, Anindita; Li, Y.-F.; Shimizu, T.; Klämpfl, Tobias; Zimmermann, J. L.; Morfill, G. E.

    2012-10-01

    Cold Atmospheric Plasma (CAP) is a fast, low cost, simple, easy to handle technology for biological application. Our group has developed a number of different CAP devices using the microwave technology and the surface micro discharge (SMD) technology. In this study, FlatPlaSter2.0 at different time intervals (0.5 to 5 min) is used for microbial inactivation. There is a continuous demand for deactivation of microorganisms associated with raw foods/seeds without loosing their properties. This research focuses on the kinetics of CAP induced microbial inactivation of naturally growing surface microorganisms on seeds. The data were assessed for log- linear and non-log-linear models for survivor curves as a function of time. The Weibull model showed the best fitting performance of the data. No shoulder and tail was observed. The models are focused in terms of the number of log cycles reduction rather than on classical D-values with statistical measurements. The viability of seeds was not affected for CAP treatment times up to 3 min with our device. The optimum result was observed at 1 min with increased percentage of germination from 60.83% to 89.16% compared to the control. This result suggests the advantage and promising role of CAP in food industry.

  15. The use of bottle caps as submerged aerated filter medium.

    Science.gov (United States)

    Damasceno de Oliveira, Laurence; Motlagh, Amir Mohaghegh; Goel, Ramesh; de Souza Missagia, Beatriz; Alves de Abreu Filho, Benício; Lautenschlager, Sandro Rogério

    2014-01-01

    In this study, a submerged aerated filter (SAF) using bottle caps as a support medium was evaluated. The system was fed with effluent from an upflow anaerobic sludge blanket system at ETE 2-South wastewater treatment plant, under different volumetric organic load rates (VOLRs). The population of a particular nitrifying microbial community was assessed by fluorescent in situ hybridization with specific oligonucleotide probes. The system showed an average removal of chemical oxygen demand (COD) equal to 76% for VOLRs between 2.6 and 13.6 kg COD m(-3)_media.day(-1). The process of nitrification in conjunction with the removal of organic matter was observed from applying VOLRs lower than 5.5 kg COD m(-3)_media.day(-1) resulting in 78% conversion of NH4(+)-N. As the applied organic load was reduced, an increase in the nitrifying bacteria population was observed compared with total 4'-6-diamidino-2-phenylindole (DAPI) stained cells. Generally, SAF using bottle caps as a biological aerated filter medium treating wastewater from an anaerobic system showed promising removal of chemical oxygen demand (COD) and conversion of NH4(+)-N. PMID:24718345

  16. Trapping and release of citrate-capped gold nanoparticles

    International Nuclear Information System (INIS)

    An electrical method to trap and release charged gold nanoparticles onto and from the surface of gold electrodes modified by an alkanethiol self-assembled monolayer (SAM) is presented. To form electrodes coated with gold nanoparticles (GNPs), amine-terminated SAMs on gold electrodes were immersed in a solution of negatively charged citrate-capped GNPs. Accumulation of GNPs on the electrode surface was monitored by a decrease in the impedance of the SAM-modified electrode and by an increase in the electrochemical activity at the electrode as shown through cyclic voltammetry (CV). Electrostatic interactions between the GNPs and the amine-terminated SAM trap the GNPs on the electrode surface. Application of a subsequent negative bias to the electrode initiated a partial release of the GNPs from the electrode surface. Impedance spectroscopy, cyclic voltammetry, ultraviolet-visible (UV-Vis) spectroscopy and atomic force microscopy (AFM) were used to monitor and confirm the attraction of GNPs to and release from the aminealkanethiolated gold electrodes. This work describes a method of trapping and release for citrate-capped GNPs that could be used for on-demand nanoparticle delivery applications such as in assessing and modeling nanoparticle toxicology, as well as for monitoring the functionalization of gold nanoparticles.

  17. Greening CAP payments: a missed opportunity?

    Energy Technology Data Exchange (ETDEWEB)

    Matthews, Alan

    2013-01-15

    At an important point in the current reform of the Common Agricultural Policy (CAP), a new IIEA policy brief by Professor Alan Matthews, one of the EU’s foremost experts on the topic, considers proposals to green direct farm payments. Professor Matthews argues that proposed greening of direct payments – the key innovation in the current round of CAP Reform – look likely to fail. While greening may survive as a concept, the likely outcome of the negotiations between Agriculture Ministers and the European Parliament will deliver little practical environmental benefit. The paper examines the rationale underpinning greening, arguing that it exists to justify the continuation of a large agricultural budget, explores reasons for the apparent failure of the proposals, and reflects on the implications for future efforts to better integrate environmental objectives into EU agriculture policy. This is the first in a series of Environment Nexus policy briefs by leading experts in the fields of agriculture, energy, climate change and water.

  18. Should we geoengineer larger ice caps?

    CERN Document Server

    Haqq-Misra, Jacob

    2015-01-01

    The climate of Earth is susceptible to catastrophes that could threaten the longevity of human civilization. Geoengineering to reduce incoming solar radiation has been suggested as a way to mediate the warming effects of contemporary climate change, but a geoengineering program for thousands of years could also be used to enlarge the size of the polar ice caps and create a permanently cooler climate. Such a large ice cap state would make Earth less susceptible to climate threats and could allow human civilization to survive further into the future than otherwise possible. Intentionally extending Earth's glacial coverage will require uninterrupted commitment to this program for millenia but would ultimately reach a cooler equilibrium state where geoengineering is no longer needed. Whether or not this program is ever attempted, this concept illustrates the need to identify preference among potential climate states to ensure the long-term success of civilization.

  19. Process for making surfactant capped nanocrystals

    Science.gov (United States)

    Alivisatos, A Paul; Rockenberger, Joerg

    2002-01-01

    Disclosed is a process for making surfactant capped nanocrystals of transition metal oxides. The process comprises reacting a metal cupferron complex of the formula M Cup, wherein M is a transition metal, and Cup is a cupferron, with a coordinating surfactant, the reaction being conducted at a temperature ranging from about 250 to about 300 C., for a period of time sufficient to complete the reaction.

  20. Particle Entrainment in Spherical-Cap Wakes

    OpenAIRE

    Warncke, N.G.W.; Delfos, R.; Ooms, G.; Westerweel, J.

    2011-01-01

    In this work we study the preferential concentration of small particles in the turbulent wake behind a spherical-cap object. We present a model predicting the mean particle concentration in the near-wake as a function of the characteristic Stokes number of the problem, the turbulence level and the Froude number. We compare the model with our experimental results on this flow, measured in a vertical water tunnel.

  1. Polar cap size metrics study at CCMC

    Science.gov (United States)

    Rastaetter, L.; Kuznetsova, M. M.; Hesse, M.; Gombosi, T. I.; Raeder, J.; Weimer, D.

    2005-12-01

    The Community-Coordinated Modeling Center (CCMC) tests space physics models covering space from the Sun's corona to the Earth's ionosphere and makes them available for researchers through a run-on-request capability. The polar cap size and location as observed by global auroral imagers is used as a basis model to study the performance of global MHD simulation models and statistical models of the auroral ionosphere. With good confidence one can assume that auroral emissions are located within the closed magnetic field lines in a narrow region adjacent to the boundary of the open field line region of the polar cap. In this study we are using imager data from POLAR (FUV) for several events from 1997 to 2000 for which reasonable coverage is available. Simulation runs have been performed using the global magnetospheric models BATSRUS (T. Gombosi et al., U. Michigan) and OpenGGCM (J. Raeder, U. New Hampshire) as well as the Weimer (2000,2005) field-aligned current models (D. Weimer, Mission Research Corp.) fed with upstream solar wind data from the ACE or Geotail satellites. In addition to direct field line tracings available from the 3D MHD model outputs, we use field-aligned currents from both MHD models and the Weimer-2K model to determine the polar cap boundary by using the position of the maximum absolute FAC value in 16 local time sectors. We define skill scores that measure the agreement in the polar cap sizes and location between measurements and models as an example of implementations of metrics to track model performance and apply the analysis to a number of storm event days.

  2. Translated origin spherical cap harmonic analysis

    OpenAIRE

    De Santis, A.; Istituto Nazionale di Geofisica, Roma, Italy

    1991-01-01

    The method of spherical cap harmonic analysis (SCHA), due to Haines (1985) is appropriate for regional geomagnetic field modelling as it includes the required potential field constraints and, for a given number of model parameters, describes shorter wavelength features than a global spherical harmonic model. If the origin of the coordinate system is moved from the centre of the Earth towards the surface then the Earth's surface is no longer equidistant from the origin. At the Earth's surface ...

  3. ALTERNATE REDUCTANT COLD CAP EVALUATION FURNACE PHASE I TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, F.; Miller, D.; Zamecnik, J.; Lambert, D.

    2014-04-22

    Savannah River Remediation (SRR) conducted a Systems Engineering Evaluation (SEE) to determine the optimum alternate reductant flowsheet for the Defense Waste Processing Facility (DWPF). Specifically, two proposed flowsheets (nitric–formic–glycolic and nitric–formic–sugar) were evaluated based upon results from preliminary testing. Comparison of the two flowsheets among evaluation criteria indicated a preference towards the nitric–formic–glycolic flowsheet. Further evaluation of this flowsheet eliminated the formic acid1, and as a result, the nitric–glycolic flowsheet was recommended for further testing. Based on the development of a roadmap for the nitric–glycolic acid flowsheet, Waste Solidification Engineering (WS-E) issued a Technical Task Request (TTR) to address flammability issues that may impact the implementation of this flowsheet. Melter testing was requested in order to define the DWPF flammability envelope for the nitric glycolic acid flowsheet. The Savannah River National Laboratory (SRNL) Cold Cap Evaluation Furnace (CEF), a 1/12th scale DWPF melter, was selected by the SRR Alternate Reductant project team as the melter platform for this testing. The overall scope was divided into the following sub-tasks as discussed in the Task Technical and Quality Assurance Plan (TTQAP):  Phase I - A nitric–formic acid flowsheet melter test (unbubbled) to baseline the Cold Cap Evaluation Furnace (CEF) cold cap and vapor space data to the benchmark melter flammability models  Phase II - A nitric–glycolic acid flowsheet melter test (unbubbled and bubbled) to: o Define new cold cap reactions and global kinetic parameters for the melter flammability models o Quantify off-gas surging potential of the feed o Characterize off-gas condensate for complete organic and inorganic carbon species Prior to startup, a number of improvements and modifications were made to the CEF, including addition of cameras, vessel support temperature measurement, and a

  4. Platform-based production development

    DEFF Research Database (Denmark)

    Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

    2015-01-01

    Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

  5. Transactional Network Platform: Applications

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  6. Pulp-Capping with Mineral Trioxide Aggregate

    Directory of Open Access Journals (Sweden)

    Peycheva Kalina

    2015-11-01

    Full Text Available There are two considerations for direct pulp capping - accidental mechanical pulp exposure and exposure caused by caries. Mineral trioxide aggregate (MTA was used as pulp-capping material to preserve the vitality of the pulpal tissues. Follow-up examinations revealed that treatment was successful in preserving pulpal vitality and continued development of the tooth. On the basis of available information, it appears that MTA is the material of choice for some clinical applications. Material and methods: Cases 18 - 8 teeth with grey MTA, 10 teeth with white MTA; diagnose: Pulpitis chronica ulcerosa, Electro pulpal test (EOD - 30-35 μA, pre-clinical X-ray - without changes in the structures, follow ups for 4 years. Successful treatments: without clinical symptoms and changes in the X-rays: 5 teeth with grey MTA, 8 teeth with white MTA for period of 4 years. Unsuccessful treatments: Clinical symptoms and sometimes changes in the X-ray: 3 with grey MTA, 2 with white MTA. MTA is an appropriate material for pulp-capping and follow-up examinations revealed that the treatment was successful in preserving pulpal vitality.

  7. Universal visualization platform

    Science.gov (United States)

    Gee, Alexander G.; Li, Hongli; Yu, Min; Smrtic, Mary Beth; Cvek, Urska; Goodell, Howie; Gupta, Vivek; Lawrence, Christine; Zhou, Jainping; Chiang, Chih-Hung; Grinstein, Georges G.

    2005-03-01

    Although there are a number of visualization systems to choose from when analyzing data, only a few of these allow for the integration of other visualization and analysis techniques. There are even fewer visualization toolkits and frameworks from which one can develop ones own visualization applications. Even within the research community, scientists either use what they can from the available tools or start from scratch to define a program in which they are able to develop new or modified visualization techniques and analysis algorithms. Presented here is a new general-purpose platform for constructing numerous visualization and analysis applications. The focus of this system is the design and experimentation of new techniques, and where the sharing of and integration with other tools becomes second nature. Moreover, this platform supports multiple large data sets, and the recording and visualizing of user sessions. Here we introduce the Universal Visualization Platform (UVP) as a modern data visualization and analysis system.

  8. Industry Platforms and Ecosystem Innovation

    OpenAIRE

    Gawer, Annabelle; Cusumano, Michael A., 1954-

    2013-01-01

    This paper brings together the recent literature on industry platforms and shows how it relates to managing innovation within and outside the firm as well as to dealing with technological and market disruptions and change over time. First, we identify distinct types of platforms. Our analysis of a wide range of industry examples suggests that there are two predominant types of platforms: internal or company-specific platforms, and external or industry-wide platforms. We define internal (compa...

  9. Greenhouse gas emissions through cap barriers of landfills

    Energy Technology Data Exchange (ETDEWEB)

    Gourc, J.P.; Staub, M.; Simonin, R. [Grenoble Univ. (France). LTHE

    2009-07-01

    A study was conducted to examine the environmental impacts of landfill cap covers used to produce biogas. The sensitivity of the environmental performance of landfills on biogas collection and recovery systems as well as on cap cover characteristics was investigated. The study examined both soil and geosynthetic landfill cap covers used to maintain impermeability at landfill sites as well as to enable biogas recovery. Two types of cap cover were discussed: (1) a cover that enabled passive wetting of the landfill wastes through rainfall; and (2) an impermeable cap used to control leachate recirculation. The environmental impacts of both caps were discussed. The study showed that landfill cap covers are a significant means of sequestering greenhouse gases (GHGs).

  10. Crane Shaking Platform Design

    OpenAIRE

    Yan, Bixing; Vacca, Andrea

    2013-01-01

    Most of the control methodology of Mobile hydraulic crane is not as energy efficient as people think or want, and the desire to innovate novel, energy-efficient control strategy is the target of most hydraulic experts. To develop or test the control method under real road and off-road conditions, a platform that could simulate the movement and vibration of the crane truck is desired. To design and build the multi-operation platform, a design process includes brain storming, design selection, ...

  11. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2010-01-01

    The Azure Services Platform is a brand-new cloud-computing technology from Microsoft. It is composed of four core components-Windows Azure, .NET Services, SQL Services, and Live Services-each with a unique role in the functioning of your cloud service. It is the goal of this book to show you how to use these components, both separately and together, to build flawless cloud services. At its heart Windows Azure Platform is a down-to-earth, code-centric book. This book aims to show you precisely how the components are employed and to demonstrate the techniques and best practices you need to know

  12. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2011-01-01

    The Windows Azure Platform has rapidly established itself as one of the most sophisticated cloud computing platforms available. With Microsoft working to continually update their product and keep it at the cutting edge, the future looks bright - if you have the skills to harness it. In particular, new features such as remote desktop access, dynamic content caching and secure content delivery using SSL make the latest version of Azure a more powerful solution than ever before. It's widely agreed that cloud computing has produced a paradigm shift in traditional architectural concepts by providin

  13. Characterization of cap binding proteins associated with the nucleus

    International Nuclear Information System (INIS)

    Eucaryotic mRNAs a carry 7-methylguanosine triphosphate residue (called cap structure) at their 5' terminus. The cap plays an important role in RNA recognition. Cap binding proteins (CBP) of HeLa cells were identified by photoaffinity labelling using the cap analogue γ-(32P)-(4-(benzoyl-phenyl)methylamido)-7-methylguanosine-5'-triphosphate (BP-m7GTP). Photoreaction of this cap analogue with HeLa cell initiation factors resulted in specific labelling of two polypeptides of Msub(r) 37000 and 26000. The latter was also labelled in crude initiation factors prepared from reticulocytes and is identical to the cap binding protein CBP I previously identified. These cap binding proteins were also affinity labelled in poliovirus infected cell extracts. Photoaffinity reaction with BP-m7GTP of whole HeLa cell homogenate showed three additional polypeptides with Msub(r) 120000, 89000 and 80000. These cap binding proteins were found to be associated with the nucleus and are therefore referred to as nuclear cap binding proteins, i.e. NCBP 1, NCBP 2 and NCBP 3. They were also present in splicing extracts. Photoaffinity labelling in these nuclear extracts was differentially inhibited by various cap analogues and capped mRNAs. Affinity chromatography on immobilized globin mRNA led to a partial separation of the three nuclear cap binding proteins. Chromatography on m7GTP-Sepharose resulted in a specific binding of NCBP 3. The different behaviour of the cap binding proteins suggests that they are functionally distinct and that they might be involved in different processes requiring cap recognition. (Author)

  14. Platform Performance and Challenges - using Platforms in Lego Company

    DEFF Research Database (Denmark)

    Munk, Lone; Mortensen, Niels Henrik

    2009-01-01

    This article studies the performance and challenges of using nine implemented product platforms in LEGO Company. Most of these do produce results, but do not meet their goals due to challenges in their usage in the daily product. The main challenges are that the platforms are not being used by the...... product defining users (product developers) and platform erosion. When the platforms are not used it is due to: unsuitable calculation models, lack of goals, rewards or benefits from management, unattractive tradeoffs and difficulties in understanding the platform. This indicates that platform design...

  15. Creative Platform Learning (CPL)

    DEFF Research Database (Denmark)

    Christensen, Jonna Langeland; Hansen, Søren

    Creative Platform Learning (CPL) er en pædagogisk metode, der skaber foretagsomme og innovative elever, der kan anvende deres kreativitet til at lære nyt. Ifølge den nye skolereform skal Innovation og entreprenørskab tydeliggøres i alle fag. I CPL er det en integreret del af undervisningen...

  16. Shot loading platform analysis

    International Nuclear Information System (INIS)

    This document provides the wind/seismic analysis and evaluation for the shot loading platform. Hand calculations were used for the analysis. AISC and UBC load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  17. Games and Platform Decisions

    DEFF Research Database (Denmark)

    Hansen, Poul H. Kyvsgård; Mikkola, Juliana Hsuan

    2007-01-01

    application of on-line games in order to provide training for decision makers and in order to generate overview over the implications of platform decisions. However, games have to be placed in a context with other methods and we argue that a mixture of games, workshops, and simulations can provide improved...

  18. Postgraduate programmes as platform

    NARCIS (Netherlands)

    Swet, Jacqueline van; Ponte, Petra; Smit, Ben

    2007-01-01

    Typical of postgraduate courses for experienced teachers is the wealth of professional experience that the studetns bring with them. Such students can examine their own practice, for which they are fully responsible. Authors from diverse backgrounds address important aspects of the platform, such as

  19. Plastic and paper platforms for nanoparticle based immunosensors

    OpenAIRE

    Parolo, Claudio

    2013-01-01

    La tesis titulada “Plastic and paper platforms for nanoparticle based immunosensors” presentada como compendio de publicaciones, muestra avances significativos en el campo de los biosensores ópticos y electroquímicos. En la introducción (Capítulo 1) se presenta la importancia que tienen tanto los sensores inmunológicos basados en nanopartículas como los biosensores basados en plataformas de papel y nanomateriales para aplicaciones en diagnóstico. Ambas plataformas destacan por la versa...

  20. IAA transport in corn roots includes the root cap

    International Nuclear Information System (INIS)

    In earlier reports we concluded that auxin is the growth regulator that controls gravicurvature in roots and that the redistribution of auxin occurs within the root cap. Since other reports did not detect auxin in the root cap, we attempted to confirm the IAA does move through the cap. Agar blocks containing 3H-IAA were applied to the cut surface of 5 mm long apical segments of primary roots of corn (mo17xB73). After 30 to 120 min radioactivity (RA) of the cap and root tissue was determined. While segments suspended in water-saturated air accumulated very little RA in the cap, application of 0.5 μ1 of dist. water to the cap (=controls) increased RA of the cap dramatically. Application to the cap of 0.5 μ1 of sorbitol or the Ca2+ chelator EGTA reduced cap RA to 46% and 70% respectively compared to water, without affecting uptake. Control root segments gravireacted faster than non-treated or osmoticum or EGTA treated segments. The data indicate that both the degree of hydration and calcium control the amount of auxin moving through the cap

  1. Mobile Platforms and Development Environments

    CERN Document Server

    Helal, Sumi; Li, Wengdong

    2012-01-01

    Mobile platform development has lately become a technological war zone with extremely dynamic and fluid movement, especially in the smart phone and tablet market space. This Synthesis lecture is a guide to the latest developments of the key mobile platforms that are shaping the mobile platform industry. The book covers the three currently dominant native platforms -- iOS, Android and Windows Phone -- along with the device-agnostic HTML5 mobile web platform. The lecture also covers location-based services (LBS) which can be considered as a platform in its own right. The lecture utilizes a sampl

  2. Accretion magnetosphere stability. II. Polar cap ''drip''

    International Nuclear Information System (INIS)

    The entry of plasma past the shielding magnetic field of a collapsed object is examined. It is concluded that a plausible entry mode is simply a ''dripping'' motion of the polar caps of the magnetopause, owing to radiation of the hot compressed plasma there. The plasma ''drips'' would hit the object's surface either near the magnetic poles or in a ring-shaped ''auroral'' zone around the poles. Insofar as this entry mode is concerned, no special role is played by finite plasma resistivity since the plasma can reach the stellar object even if the conductivity is infinite

  3. Capítulo 6. La marina

    OpenAIRE

    Riviale, Pascal

    2015-01-01

    La marina francesa desempeñó, a todo lo largo del siglo xix, un considerable papel en la investigación arqueológica en el Perú. A tal punto que conviene consagrar a esta institución un capítulo entero para tratar de las diferentes facetas de su aporte científico. La participación de la Marina en la recolección de datos, exigida por el desarrollo de las ciencias —naturales y humanas—, fue hecha posible, desde luego, gracias a su presencia efectiva en todos los mares del mundo, ya fuese, como v...

  4. Macrophage Capping Protein CapG Is a Putative Oncogene Involved in Migration and Invasiveness in Ovarian Carcinoma

    Directory of Open Access Journals (Sweden)

    J. Glaser

    2014-01-01

    Full Text Available The actin binding protein CapG modulates cell motility by interacting with the cytoskeleton. CapG is associated with tumor progression in different nongynecologic tumor entities and overexpression in breast cancer cell lines correlates with a more invasive phenotype in vitro. Here, we report a significant CapG overexpression in 18/47 (38% of ovarian carcinomas (OC analyzed by qRealTime-PCR analyses. Functional analyses in OC cell lines through siRNA mediated CapG knockdown and CapG overexpression showed CapG-dependent cell migration and invasiveness. A single nucleotide polymorphism rs6886 inside the CapG gene was identified, affecting a CapG phosphorylation site and thus potentially modifying CapG function. The minor allele frequency (MAF of SNP rs6886 (c.1004A/G was higher and the homozygous (A/A, His335 genotype was significantly more prevalent in patients with fallopian tube carcinomas (50% as in controls (10%. With OC being one of the most lethal cancer diseases, the detection of novel biomarkers such as CapG could reveal new diagnostic and therapeutic targets. Moreover, in-depth analyses of SNP rs6886 related to FTC and OC will contribute to a better understanding of carcinogenesis and progression of OC.

  5. APPLICATION OF BP NEURAL NETWORK TO ASSESS THE POLLUTION LEVEL OF OIL SPILL ON THE OFFSHORE PLATFORM%BP网络海上石油平台溢油污染等级评估方法

    Institute of Scientific and Technical Information of China (English)

    郎印海; 刘洁; 贾永刚; 崔文林

    2011-01-01

    Assessment index system of oil spill for the offshore oil platform was established for the first time by analyzing the influenced factors related to the degree of oil pollution. To solve the problem of non-samples, every assessment index was divided into several grades and the Rand function was used to generate enough training samples and test samples. A more reasonable network structure was established and a BP neural network model of the degree of oil pollution was finally set up. The results showed that the model had good generalization, and it not only could be used to evaluate unknown samples but also had a strong practical value.%通过分析与溢油污染程度有关的影响因素,首次构建了海上石油平台溢油污染程度评价指标体系.针对模型无样本的难题,对评价指标进行分级,利用Rand函数在各分级标准内随机生成足够数量的训练和测试样本,建立了较合理的网络结构,构建了石油平台溢油污染等级BP网络模型.研究结果表明BP网络模型具有很强的泛化能力,能够用于评判未知样本,具有较强的实用性.

  6. Incorporating Wind Generation in Cap and Trade Programs

    Energy Technology Data Exchange (ETDEWEB)

    Bluestein, J.; Salerno, E.; Bird, L.; Vimmerstedt, L.

    2006-07-01

    Cap and trade programs are increasingly being used to reduce emissions from electricity generation in the United States. Cap and trade programs primarily target emitting generators, but programs have also included renewable generators, such as wind generators. States cite several reasons why they have considered the policy option of including renewable generators in cap and trade programs: to provide an incentive for lower-emitting generation, to achieve emissions reductions in non-capped pollutants, and to gain local economic benefits associated with renewable energy projects. The U.S. Environmental Protection Agency also notes these rationales for considering this policy alternative, and the National Association of Regulatory Commissioners (NARUC) passed a resolution supporting the inclusion of renewable energy in cap and trade programs. This report explores why states consider this policy option, what participation could mean for wind generators, and how wind generation can most effectively be included in state, federal, and regional cap and trade programs.

  7. Arrays of magnetic nanoparticles capped with alkylamines

    Indian Academy of Sciences (India)

    P John Thomas; P Saravanan; G U Kulkarni; C N R Rao

    2002-02-01

    Magnetic metal and metal oxide nanoparticles capped with alkylamines have been synthesized and characterized by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray analysis and magnetization measurements. Core-shell Pd–Ni particles with composition, Pd561Ni3000, (diameter ∼ 3.3 nm) are superparamagnetic at 5 K and organize themselves into two-dimensional crystalline arrays. Similar arrays are obtained with Pd561Ni3000Pd1500 nanoparticles containing an additional Pd shell. Magnetic spinel particles of -Fe2O3, Fe3O4 and CoFe2O4 of average diameters in the 4–6 nm range coated with octylamine are all supermagnetic at room temperature and yield close-packed disordered arrays. Relatively regular arrays are formed by dodecylamine-capped Fe3O4 nanoparticles (∼ 8.6 nm diameter) while well-ordered hexagonal arrays were obtained with octylamine-covered Co3O4 nanoparticles (∼ 4.2 nm diameter).

  8. MFTF-. cap alpha. + T progress report

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, W.D. (ed.)

    1985-04-01

    Early in FY 1983, several upgrades of the Mirror Fusion Test Facility (MFTF-B) at Lawrence Livermore National Laboratory (LLNL) were proposed to the fusion community. The one most favorably received was designated MFTF-..cap alpha..+T. The engineering design of this device, guided by LLNL, has been a principal activity of the Fusion Engineering Design Center during FY 1983. This interim progress report represents a snapshot of the device design, which was begun in FY 1983 and will continue for several years. The report is organized as a complete design description. Because it is an interim report, some parts are incomplete; they will be supplied as the design study proceeds. As described in this report, MFTF-..cap alpha..+T uses existing facilities, many MFTF-B components, and a number of innovations to improve on the physics parameters of MFTF-B. It burns deuterium-tritium and has a central-cell Q of 2, a wall loading GAMMA/sub n/ of 2 MW/m/sup 2/ (with a central-cell insert module), and an availability of 10%. The machine is fully shielded, allows hands-on maintenance of components outside the vacuum vessel 24 h after shutdown, and has provisions for repair of all operating components.

  9. A structural analysis model for clay caps

    International Nuclear Information System (INIS)

    This paper presents a structural analysis model for clay caps used in the landfill of low-level nuclear waste to minimize the migration of fluid through the soil. The clay cap resting on the soil foundation is treated as an axially symmetric elastic plate supported by an elastic foundation. A circular hole (concentric with the plate) in the elastic foundation represents an underlying cavity formed in the landfill due to waste decomposition and volume reduction. Unlike the models that commonly represent the soil foundation with equivalent springs, this model treats the foundation as a semi-infinite space and accounts for the work done by both compression and shear stresses in the foundation. The governing equation of the plate is based upon the classical theory of plate bending, whereas the governing equation derived by using Vlasov's general variational method describes the soil foundation. The solutions are expressed in terms of Basset functions. A FORTRAN program was written to carry out the numerical calculations

  10. PANDA EMC backward end-cap mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Capozza, Luigi; Ceballos, Jorge; Lin, Dexu; Maas, Frank; Rodriguez, David; Valente, Roserio; Welzel, Felix [Helmholtz-Institut Mainz (Germany); Collaboration: PANDA-Collaboration

    2013-07-01

    The PANDA experiment at the FAIR facility will be a multipurpose hermetic spectrometer covering the full solid angle range. A key role for several physics cases will be played by the electromagnetic calorimeter. This includes ca. 15000 PbWO{sub 4} scintillating crystals arranged in a central barrel, a forward and a backward end-cap. The backward end-cap of the PANDA electromagnetic calorimeter is composed by 540 straight crystals covering the scattering angles between 147 {sup circle} and 161 {sup circle}. They are housed in the so-called alveoli which are carbon fibre boxes, providing both strength and low material budget. The crystals are to work at -25 C in order to improve the light yield. To achieve this temperature a cooling system and thermal insulation are needed. The cooling system removes the heat coming from the electronics and through walls, cables and mechanical supports. Vacuum insulated panels are installed as a thermal shielding. Avalanche Photodiodes (APD) have been chosen as photon detectors, since they are still functional under strong magnetic fields. ASIC chips will be used to amplify the APD signal, this preamplifier features low noise and low heat generation. Due to the weight of this detector, it will be supported from the outside of the PANDA target spectrometer in a counter lever arm position.

  11. Variability of electrode positions using electrode caps.

    Science.gov (United States)

    Atcherson, Samuel R; Gould, Herbert Jay; Pousson, Monique A; Prout, Tina M

    2007-01-01

    We investigated the variability of electrode positions for a multi-channel, custom electrode cap placed onto participants' heads without taking scalp measurements. The electrode positions were digitized in a three-dimensional space for 10 young adult participants on three separate occasions. Positional variability was determined for 15 selected electrodes within the three-dimensional preauricular-nasion (PAN) coordinate system and from this system, angular coordinate variability was also determined. The standard deviations of the 15 selected electrodes ranged from 3.0 to 12.7 mm in the PAN system. These data resulted in a variability of 2.0 degrees to 10.4 degrees among the angular coordinates. The measurements indicated slightly greater variability of electrode positions compared to studies when electrodes were placed using scalp measurements. The implication of this study is that the use of electrode caps may not be appropriate when electroencephalographic (EEG) or evoked potential (EP) techniques depend on accurate electrode placement. Additionally, if a longitudinal study is performed, electrode locations should be checked to ensure that they conform with previous sessions. PMID:17929157

  12. Online stock trading platform

    Directory of Open Access Journals (Sweden)

    Ion LUNGU

    2006-01-01

    Full Text Available The Internet is the perfect tool that can assure the market’s transparency for any user who wants to trade on the stock market. The investor can have access to the market news, financial calendar or the press releases of the issuers. A good online trading platform also provides real-time intraday quotes, trading history and technical analysis giving the investor a clearer view of the supply and demand in the market. All this information provides the investor a good image of the market and encourages him to trade. This paper wishes to draft the pieces of an online trading platform and to analyze the impact of developing and implementing one in a brokerage firm.

  13. RemoteLabs Platform

    Directory of Open Access Journals (Sweden)

    Nils Crabeel

    2012-03-01

    Full Text Available This paper reports on a first step towards the implementation of a framework for remote experimentation of electric machines – the RemoteLabs platform. This project was focused on the development of two main modules: the user Web-based and the electric machines interfaces. The Web application provides the user with a front-end and interacts with the back-end – the user and experiment persistent data. The electric machines interface is implemented as a distributed client server application where the clients, launched by the Web application, interact with the server modules located in platforms physically connected the electric machines drives. Users can register and authenticate, schedule, specify and run experiments and obtain results in the form of CSV, XML and PDF files. These functionalities were successfully tested with real data, but still without including the electric machines. This inclusion is part of another project scheduled to start soon.

  14. Available: motorised platform

    CERN Document Server

    The COMPASS collaboration

    2014-01-01

    The COMPASS collaboration would like to offer to a new owner the following useful and fully operational piece of equipment, which is due to be replaced with better adapted equipment.   Please contact Erwin Bielert (erwin.bielert@cern.ch or 160539) for further information.  Motorized platform (FOR FREE):   Fabricated by ACL (Alfredo Cardoso & Cia Ltd) in Portugal. The model number is MeXs 5-­‐30.  Specifications: 5 m wide, 1 m deep, adjustable height (1.5 m if folded). Maximum working floor height: 4 m. conforms to CERN regulations, number LV158. Type LD500, capacity 500 kg and weight 2000 kg.  If no interested party is found before December 2014, the platform will be thrown away.

  15. Common tester platform concept.

    Energy Technology Data Exchange (ETDEWEB)

    Hurst, Michael James

    2008-05-01

    This report summarizes the results of a case study on the doctrine of a common tester platform, a concept of a standardized platform that can be applicable across the broad spectrum of testing requirements throughout the various stages of a weapons program, as well as across the various weapons programs. The common tester concept strives to define an affordable, next-generation design that will meet testing requirements with the flexibility to grow and expand; supporting the initial development stages of a weapons program through to the final production and surveillance stages. This report discusses a concept investing key leveraging technologies and operational concepts combined with prototype tester-development experiences and practical lessons learned gleaned from past weapons programs.

  16. Cloud Robotics Platforms

    OpenAIRE

    Busra Koken

    2015-01-01

    Cloud robotics is a rapidly evolving field that allows robots to offload computation-intensive and storage-intensive jobs into the cloud. Robots are limited in terms of computational capacity, memory and storage. Cloud provides unlimited computation power, memory, storage and especially collaboration opportunity. Cloud-enabled robots are divided into two categories as standalone and networked robots. This article surveys cloud robotic platforms, standalone and networked robotic works such as ...

  17. Cloud Robotics Platforms

    Directory of Open Access Journals (Sweden)

    Busra Koken

    2015-01-01

    Full Text Available Cloud robotics is a rapidly evolving field that allows robots to offload computation-intensive and storage-intensive jobs into the cloud. Robots are limited in terms of computational capacity, memory and storage. Cloud provides unlimited computation power, memory, storage and especially collaboration opportunity. Cloud-enabled robots are divided into two categories as standalone and networked robots. This article surveys cloud robotic platforms, standalone and networked robotic works such as grasping, simultaneous localization and mapping (SLAM and monitoring.

  18. Geology of spermonde platform

    OpenAIRE

    A. M. Imran; M.S., Kaharuddin; Suriamihardja, D.A.; Sirajuddin, H.

    2013-01-01

    ABSTRACT: The spermonde islands are a reef complex trending north ??? south in the western coastline of South Sulawesi. The development of the reef is controlled by geological processes forming Makassar Strait. The strait arises since rifting between Kalimantan and Sulawesi in Paleocene Era and followed by spreading to form Makassar Strait. The geological process allows the reef complex developed along the Spermonde platform in the west coast of South Sulawesi. Beside the geological factor (s...

  19. HPC - Platforms Penta Chart

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo, Angelina Michelle [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-08

    Strategy, Planning, Acquiring- very large scale computing platforms come and go and planning for immensely scalable machines often precedes actual procurement by 3 years. Procurement can be another year or more. Integration- After Acquisition, machines must be integrated into the computing environments at LANL. Connection to scalable storage via large scale storage networking, assuring correct and secure operations. Management and Utilization – Ongoing operations, maintenance, and trouble shooting of the hardware and systems software at massive scale is required.

  20. Acoustic Monitoring of the Arctic Ice Cap

    Science.gov (United States)

    Porter, D. L.; Goemmer, S. A.; Chayes, D. N.

    2012-12-01

    Introduction The monitoring of the Arctic Ice Cap is important economically, tactically, and strategically. In the scenario of ice cap retreat, new paths of commerce open, e.g. waterways from Northern Europe to the Far East. Where ship-going commerce is conducted, the U.S. Navy and U.S. Coast Guard have always stood guard and been prepared to assist from acts of nature and of man. It is imperative that in addition to measuring the ice from satellites, e.g. Icesat, that we have an ability to measure the ice extent, its thickness, and roughness. These parameters play an important part in the modeling of the ice and the processes that control its growth or shrinking and its thickness. The proposed system consists of three subsystems. The first subsystem is an acoustic source, the second is an array of geophones and the third is a system to supply energy and transmit the results back to the analysis laboratory. The subsystems are described below. We conclude with a plan on how to tackle this project and the payoff to the ice cap modeler and hence the users, i.e. commerce and defense. System Two historically tested methods to generate a large amplitude multi-frequency sound source include explosives and air guns. A new method developed and tested by the University of Texas, ARL is a combustive Sound Source [Wilson, et al., 1995]. The combustive sound source is a submerged combustion chamber that is filled with the byproducts of the electrolysis of sea water, i.e. Hydrogen and Oxygen, an explosive mixture which is ignited via a spark. Thus, no additional compressors, gases, or explosives need to be transported to the Arctic to generate an acoustic pulse capable of the sediment and the ice. The second subsystem would be geophones capable of listening in the O(10 Hz) range and transmitting that data back to the laboratory. Thus two single arrays of geophones arranged orthogonal to each other with a range of 1000's of kilometers and a combustive sound source where the two

  1. Lowering the YE+1 end-cap for CMS

    CERN Multimedia

    Maximilien Brice

    2007-01-01

    On 9 January 2007, the massive YE+1 end-cap was lowered into the CMS cavern. This is a very precise process as the crane must lower the end-cap through minimal clearance without tilt or sway. Once in the cavern, the end-cap is then positioned over the end of the barrel to detect particles produced in collisions that travel close to the axis of the beams.

  2. Setting the X Factor in Price Cap Regulation Plans

    OpenAIRE

    Jeffrey I. Bernstein; Sappington, David E.M.

    1998-01-01

    Despite the popularity of price cap regulation in practice, the economic literature provides relatively little guidance on how to determine the X factor, which is the rate at which inflation -adjusted output prices must fall under price cap plans. We review the standard principles that inform the choice of the X factor, and then consider important extensions. We analyze appropriate modifications of the X factor: (1) when only a subset of the firm's products are subject to price cap regulation...

  3. The economics of crowdfunding platforms

    OpenAIRE

    Belleflamme, Paul; Omrani, Nessrine; Peitz, Martin

    2015-01-01

    This paper provides a description of the crowdfunding sector, considering investment-based crowdfunding platforms as well as platforms in which funders do not obtain monetary payments. It lays out key features of this quickly developing sector and explores the economic forces at play that can explain the design of these platforms. In particular, it elaborates on cross-group and within-group external effects and asymmetric information on crowdfunding platforms.

  4. The Prodiguer Messaging Platform

    Science.gov (United States)

    Denvil, S.; Greenslade, M. A.; Carenton, N.; Levavasseur, G.; Raciazek, J.

    2015-12-01

    CONVERGENCE is a French multi-partner national project designed to gather HPC and informatics expertise to innovate in the context of running French global climate models with differing grids and at differing resolutions. Efficient and reliable execution of these models and the management and dissemination of model output are some of the complexities that CONVERGENCE aims to resolve.At any one moment in time, researchers affiliated with the Institut Pierre Simon Laplace (IPSL) climate modeling group, are running hundreds of global climate simulations. These simulations execute upon a heterogeneous set of French High Performance Computing (HPC) environments. The IPSL's simulation execution runtime libIGCM (library for IPSL Global Climate Modeling group) has recently been enhanced so as to support hitherto impossible realtime use cases such as simulation monitoring, data publication, metrics collection, simulation control, visualizations … etc. At the core of this enhancement is Prodiguer: an AMQP (Advanced Message Queue Protocol) based event driven asynchronous distributed messaging platform. libIGCM now dispatches copious amounts of information, in the form of messages, to the platform for remote processing by Prodiguer software agents at IPSL servers in Paris. Such processing takes several forms: Persisting message content to database(s); Launching rollback jobs upon simulation failure; Notifying downstream applications; Automation of visualization pipelines; We will describe and/or demonstrate the platform's: Technical implementation; Inherent ease of scalability; Inherent adaptiveness in respect to supervising simulations; Web portal receiving simulation notifications in realtime.

  5. Upgrading platform using alkali metals

    Science.gov (United States)

    Gordon, John Howard

    2014-09-09

    A process for removing sulfur, nitrogen or metals from an oil feedstock (such as heavy oil, bitumen, shale oil, etc.) The method involves reacting the oil feedstock with an alkali metal and a radical capping substance. The alkali metal reacts with the metal, sulfur or nitrogen content to form one or more inorganic products and the radical capping substance reacts with the carbon and hydrogen content to form a hydrocarbon phase. The inorganic products may then be separated out from the hydrocarbon phase.

  6. Manifold: a Custom Analytics Platform to Visualize Research Impact

    OpenAIRE

    Steven Braun

    2015-01-01

    The use of research impact metrics and analytics has become an integral component to many aspects of institutional assessment. Many platforms currently exist to provide such analytics, both proprietary and open source; however, the functionality of these systems may not always overlap to serve uniquely specific needs. In this paper, I describe a novel web-based platform, named Manifold, that I built to serve custom research impact assessment needs in the University of Minnesota Medical School...

  7. Product Platform Screening at LEGO

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Steen Jensen, Thomas; Nielsen, Ole Fiil

    2012-01-01

    Product platforms offer great benefits to companies developing new products in highly competitive markets. Literature describes how a single platform can be designed from a technical point of view, but rarely mentions how the process begins. How do companies identify possible platform candidates...

  8. Contemporary Internet of Things platforms

    OpenAIRE

    Mineraud, Julien; Mazhelis, Oleksiy; Su, Xiang; Tarkoma, Sasu

    2015-01-01

    This document regroups a representative, but non-exhaustive, list of contemporary IoT platforms. The platforms are ordered alphabetically. The aim of this document is to provide the a quick review of current IoT platforms, as well as relevant information.

  9. Design and Performance of Capping Layers for EUV Multilayer Mirrors

    Energy Technology Data Exchange (ETDEWEB)

    Bajt, S; Chapman, H N; Nuygen, N; Alameda, J; Robinson, J C; Malinowski, M; Gullikson, E; Aquila, A; Tarrio, C; Grantham, S

    2003-03-10

    The reflectance stability of multilayer coatings for extreme ultraviolet lithography (EUVL) in a commercial tool environment is of uttermost importance to ensure continuous exposures with minimum maintenance cost. We have made substantial progress in designing the protective capping layer coatings, understanding their performance and estimating their lifetimes based on accelerated electron beam and EUV exposure studies. Our current capping layer coatings have about 40 times longer lifetimes than Si-capped multilayer optics. Nevertheless, the lifetime of current Ru-capped multilayers is too short to satisfy commercial tool requirements and further improvements are essential.

  10. Ozone depletion over the polar caps caused by solar protons

    International Nuclear Information System (INIS)

    Energetic solar protons are a natural source of ozone depletion due to nitric oxides they produce in the earth's atmosphere. In March 1989, following a period of intense solar activity, the TOMS instrument aboard the Nimbus 7 satellite recorded very similar ozone losses over both polar caps for areas extending from 90 degrees to 70 degrees. Ozone depletions of 7.4 x 109 kg for the south polar cap and 8.0 x 109 kg for the north polar cap indicate the degree of symmetry over the polar caps. 11 refs., 6 figs

  11. Microbial diversity on Icelandic glaciers and ice caps

    Directory of Open Access Journals (Sweden)

    Stefanie eLutz

    2015-04-01

    Full Text Available Algae are important primary colonizers of snow and glacial ice, but hitherto little is known about their ecology on Iceland’s glaciers and ice caps. Due do the close proximity of active volcanoes delivering large amounts of ash and dust, they are special ecosystems. This study provides the first investigation of the presence and diversity of microbial communities on all major Icelandic glaciers and ice caps over a three year period. Using high-throughput sequencing of the small subunit ribosomal RNA genes (16S and 18S, we assessed the snow community structure and complemented these analyses with a comprehensive suite of physical-, geo- and biochemical characterizations of the aqueous and solid components contained in snow and ice samples. Our data reveal that a limited number of snow algal taxa (Chloromonas polyptera, Raphidonema sempervirens and two uncultured Chlamydomonadaceae support a rich community comprising of other micro-eukaryotes, bacteria and archaea. Proteobacteria and Bacteroidetes were the dominant bacterial phyla. Archaea were also detected in sites where snow algae dominated and they mainly belong to the Nitrososphaerales, which are known as important ammonia oxidizers. Multivariate analyses indicated no relationships between nutrient data and microbial community structure. However, the aqueous geochemical simulations suggest that the microbial communities were not nutrient limited because of the equilibrium of snow with the nutrient-rich and fast dissolving volcanic ash. Increasing algal secondary carotenoid contents in the last stages of the melt seasons have previously been associated with a decrease in surface albedo, which in turn could potentially have an impact on the melt rates of Icelandic glaciers.

  12. Landfill cap models under simulated climate change precipitation::Impacts of cracks and root growth

    OpenAIRE

    Sinnathamby, Gowthaman; Phillips, Debra; Sivakumar, Vinayagamoothy; Paksy, Andras

    2014-01-01

    Desiccation crack formation is a key process that needs to be understood in assessment of landfill cap performance under anticipated future climate change scenarios. The objectives of this study were to examine: (a) desiccation cracks and impacts that roots may have on their formation and resealing, and (b) their impacts on hydraulic conductivity under anticipated climate change precipitation scenarios. Visual observations, image analysis of thin sections and hydraulic conductivity tests were...

  13. DNA double-strand break repair proteins are required to cap the ends of mammalian chromosomes

    OpenAIRE

    Bailey, Susan M.; Meyne, Julianne; Chen, David J.; Kurimasa, Akihiro; Li, Gloria C.; Lehnert, Bruce E.; Goodwin, Edwin H.

    1999-01-01

    Recent findings intriguingly place DNA double-strand break repair proteins at chromosome ends in yeast, where they help maintain normal telomere length and structure. In the present study, an essential telomere function, the ability to cap and thereby protect chromosomes from end-to-end fusions, was assessed in repair-deficient mouse cell lines. By using fluorescence in situ hybridization with a probe to telomeric DNA, spontaneously occurring chromosome aberrations were examined for telomere ...

  14. PR-PR: Cross-Platform Laboratory Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Linshiz, G; Stawski, N; Goyal, G; Bi, CH; Poust, S; Sharma, M; Mutalik, V; Keasling, JD; Hillson, NJ

    2014-08-01

    To enable protocol standardization, sharing, and efficient implementation across laboratory automation platforms, we have further developed the PR-PR open-source high-level biology-friendly robot programming language as a cross-platform laboratory automation system. Beyond liquid-handling robotics, PR-PR now supports microfluidic and microscopy platforms, as well as protocol translation into human languages, such as English. While the same set of basic PR-PR commands and features are available for each supported platform, the underlying optimization and translation modules vary from platform to platform. Here, we describe these further developments to PR-PR, and demonstrate the experimental implementation and validation of PR-PR protocols for combinatorial modified Golden Gate DNA assembly across liquid-handling robotic, microfluidic, and manual platforms. To further test PR-PR cross-platform performance, we then implement and assess PR-PR protocols for Kunkel DNA mutagenesis and hierarchical Gibson DNA assembly for microfluidic and manual platforms.

  15. Viscoplastic augmentation of the smooth cap model

    International Nuclear Information System (INIS)

    The most common numerical viscoplastic implementations are formulations attributed to Perzyna. Although Perzyna-type algorithms are popular, they have several disadvantages relating to the lack of enforcement of the consistency condition in plasticity. The present work adapts a relatively unknown viscoplastic formulation attributed to Duvaut and Lions and generalized to multi-surface plasticity by Simo et al. The attraction of the Duvaut-Lions formulation is its ease of numerical implementation in existing elastoplastic algorithms. The present work provides a motivation for the Duvaut-Lions viscoplastic formulation, derivation of the algorithm and comparison with the Perzyna algorithm. A simple uniaxial strain numerical simulation is used to compare the results of the Duvaut-Lions algorithm, as adapted to the ppercase[dyna3d] smooth cap model with results from a Perzyna algorithm adapted by Katona and Muleret to an implicit code. ((orig.))

  16. Microtubule dynamics: Caps, catastrophes, and coupled hydrolysis

    DEFF Research Database (Denmark)

    Flyvbjerg, H.; Holy, T.E.; Leibler, S.

    1996-01-01

    probability distributions relating to available experimental data are derived. Caps are found to be short and the total rate of hydrolysis at a microtubule end is found to be dynamically coupled to growth. The so-called catastrophe rate is a simple function of the microtubule growth rare and fits experimental...... data. A constant nonzero catastrophe rare, identical for both microtubule ends, is predicted at large growth rates. The delay time for dilution-induced catastrophes is stochastic with a simple distribution that fits the experimental one and, like the experimental one, does not depend on the rate of...... unified description of several apparently contradictory experimental data. Experimental results for the catastrophe rate at different concentrations of magnesium ions and of microtubule associated proteins are discussed in terms of the model. Feasible experiments are suggested that can provide decisive...

  17. Carpentier, la otra novela (cap. IV

    Directory of Open Access Journals (Sweden)

    Urbano Martínez Carmenate

    2014-07-01

    Full Text Available El presente ensayo está extraído de la obra inédita de Urbano Martínez Carmenate, Carpentier, la otra novela (cap. IV. Ofrece una mirada sobre los primeros años de la trayectoria profesional de Alejo Carpentier. Se muestra cómo, durante la década de 1920, se inicia como periodista y cronista teatral. A la vez, comienzan sus conexiones con el Grupo Minorista, que desempeña un papel destacado en la etapa republicana en Cuba. También se contempla su viaje a México en 1926, que constituye su primer contacto directo con la naturaleza y la cultura americanas.

  18. The Geohazards Exploitation Platform

    Science.gov (United States)

    Laur, Henri; Casu, Francesco; Bally, Philippe; Caumont, Hervé; Pinto, Salvatore

    2016-04-01

    The Geohazards Exploitation Platform, or Geohazards TEP (GEP), is an ESA originated R&D activity of the EO ground segment to demonstrate the benefit of new technologies for large scale processing of EO data. This encompasses on-demand processing for specific user needs, systematic processing to address common information needs of the geohazards community, and integration of newly developed processors for scientists and other expert users. The platform supports the geohazards community's objectives as defined in the context of the International Forum on Satellite EO and Geohazards organised by ESA and GEO in Santorini in 2012. The GEP is a follow on to the Supersites Exploitation Platform (SSEP) an ESA initiative to support the Geohazards Supersites & Natural Laboratories initiative (GSNL). Today the GEP allows to exploit 70+ Terabyte of ERS and ENVISAT archive and the Copernicus Sentinel-1 data available on line. The platform has already engaged 22 European early adopters in a validation activity initiated in March 2015. Since September, this validation has reached 29 single user projects. Each project is concerned with either integrating an application, running on demand processing or systematically generating a product collection using an application available in the platform. The users primarily include 15 geoscience centres and universities based in Europe: British Geological Survey (UK), University of Leeds (UK), University College London (UK), ETH University of Zurich (CH), INGV (IT), CNR-IREA and CNR-IRPI (IT), University of L'Aquila (IT), NOA (GR), Univ. Blaise Pascal & CNRS (FR), Ecole Normale Supérieure (FR), ISTERRE / University of Grenoble-Alpes (FR). In addition, there are users from Africa and North America with the University of Rabat (MA) and the University of Miami (US). Furthermore two space agencies and four private companies are involved: the German Space Research Centre DLR (DE), the European Space Agency (ESA), Altamira Information (ES

  19. Drifting buoy and other data from drifting platforms in the Bering Sea as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 17 January 1981 to 20 June 1981 (NODC Accession 8200120)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Drifting buoy data was collected from drifting platforms in the Bering Sea by the Flow Research Company as part of the Outer Continental Shelf Environmental...

  20. Temperature profiles from XBT casts from the SANTA CRUZ and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 01 September 1972 to 05 November 1972 (NODC Accession 7201439)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the SANTA CRUZ and other platforms from 01 September 1972 to 05 November 1972. Data were collected by the...

  1. Marine mammal specimen and marine animal sighting data from the USCGC POLAR STAR and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 25 February 1981 to 04 December 1981 (NODC Accession 8300129)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine mammal specimen and marine animal sighting data were collected from the USCGC POLAR STAR and other platforms from 25 February 1981 to 04 December 1981. Data...

  2. Marine toxic substance and other data from bottle casts from the USCGC GLACIER and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 03 August 1977 to 03 September 1977 (NODC Accession 8000247)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine toxic substance and other data were collected from bottle casts from the USCGC GLACIER and other platforms from 03 August 1977 to 03 September 1977. Data...

  3. Temperature and salinity profiles from CTD casts from the ACONA and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 03 August 1976 to 14 September 1976 (NODC Accession 7601779)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profiles were collected from CTD casts from the ACONA and other platforms from 03 August 1976 to 14 September 1976. Data were collected by...

  4. Marine animal sighting and census data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 11 May 1982 to 14 August 1982 (NODC Accession 8400075)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from aircraft and other platforms from 11 May 1982 to 14 August 1982. Data were collected by Envirosphere Co....

  5. Marine bird colony and other data from platforms on as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 15 May 1977 to 05 September 1977 (NODC Accession 7800777)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird colony and other data were collected from platforms from 15 May 1977 to 05 September 1977. Data were collected by the University of California (UC) as...

  6. Zooplankton and other data from net casts from the ACONA and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 02 July 1974 to 15 May 1975 (NODC Accession 7601458)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton and other data were collected from net casts from the ACONA and other platforms from 02 July 1974 to 15 May 1975. Data were collected by the University...

  7. Physical, chemical, and other data from the EASTWARD and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 01 October 1972 to 07 December 1974 (NODC Accession 7700536)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, chemical, and other data were collected from the EASTWARD and other platforms from 01 October 1972 to 07 December 1974. Data were collected by the...

  8. Physical, meteorological, and other data from surface sensors and CTD casts from the MILLER FREEMAN and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 02 April 1976 to 18 June 1976 (NODC Accession 7601544)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors and CTD casts from the MILLER FREEMAN and other platforms from 02 April 1976 to 18 June...

  9. Pressure gauge and CTD data from ICE ISLANDS and other platforms from the Beaufort and Chukchi Seas in support of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 25 July 1982 to 08 March 1984 (NODC Accession 8500129)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Pressure gauge and CTD data were collected from the ICE ISLANDS and other platforms in the Beaufort and Chukchi Seas from 25 July 1982 to 08 March 1984. Data were...

  10. Physical, meteorological, and other data from surface sensors and CTD casts from the RAINIER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 04 February 1975 to 13 May 1975 (NODC Accession 7601228)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors and CTD casts from the RAINIER and other platforms. Data were collected by the Pacific...

  11. Temperature profile and other data from surface sensors and CTD casts from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 04 September 1981 to 14 March 1982 (NODC Accession 8500086)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and other data were collected from surface sensors and CTD casts from aircraft and other platforms from 04 September 1981 to 14 March 1982. Data...

  12. Temperature profile data from surface sensors and CTD casts from the NOAA Ship DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 22 October 1981 to 13 October 1982 (NODC Accession 8400037)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile data were collected from surface sensors and CTD casts from the NOAA Ship DISCOVERER and other platforms from 22 October 1981 to 13 October...

  13. Fish survey, fishing duration, and other data from net trawls from the BARGE and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 16 June 1976 to 30 March 1977 (NODC Accession 7800030)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish survey, fishing duration, and other data were collected from net trawls from the BARGE and other platforms from 16 June 1976 to 30 March 1977. Data were...

  14. Oceanographic station, meteorological and other data from bottle casts from the MILLER FREEMAN and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 17 September 1969 to 24 August 1972 (NODC Accession 7300185)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic station, meteorological, and other data were collected from bottle casts from the MILLER FREEMAN and other platforms from 17 September 1969 to 24...

  15. Temperature profiles from XBT casts from the DELTA ECUADOR and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 30 September 1978 to 05 October 1978 (NODC Accession 7800858)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the DELTA ECUADOR and other platforms from 30 September 1978 to 05 October 1978. Data were collected by the...

  16. Oceanographic station, meteorological and other data from bottle casts from the DELAWARE II and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 06 October 1978 to 17 June 1981 (NODC Accession 8100730)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic station, meteorological, and other data were collected from bottle casts from the DELEWARE II and other platforms from 06 October 1978 to 17 June...

  17. Oceanographic station, meteorological and other data from bottle casts from the ALBATROSS IV and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 22 October 1978 to 21 December 1980 (NODC Accession 8100544)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic station, meteorological, and other data were collected from bottle casts from the ALBATROSS IV and other platforms from 22 October 1978 to 21 December...

  18. Physical, meteorological, and other data from surface sensors and CTD casts from the SURVEYOR and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 23 February 1981 to 30 April 1983 (NODC Accession 8300167)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors and CTD casts from the SURVEYOR and other platforms from 23 February 1981 to 30 April...

  19. Oceanographic station, meteorological and other data from bottle casts from the ALBATROSS IV and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 17 June 1979 to 09 April 1981 (NODC Accession 8100661)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic station, meteorological, and other data were collected from bottle casts from the ALBATROSS IV and other platforms from 17 June 1979 to 09 April 1981....

  20. Temperature profiles from XBT casts from the VALIANT and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 04 March 1979 to 08 April 1979 (NODC Accession 7900186)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the VALIANT and other platforms from 04 March 1979 to 08 April 1979. Data were collected by the National...

  1. Temperature profiles from XBT casts from the VALIANT and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 23 August 1979 to 17 September 1979 (NODC Accession 7900292)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the VALIANT and other platforms from 23 August 1979 to 17 September 1979. Data were collected by the...

  2. Temperature profiles from XBT casts from the VALIANT and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 16 June 1979 to 19 August 1979 (NODC Accession 7900283)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the VALIANT and other platforms from 16 June 1979 to 19 August 1979. Data were collected by the National...

  3. Marine animal sighting and census data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 01 June 1972 to 07 September 1976 (NODC Accession 7700541)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from aircraft and other platforms from 01 June 1972 to 07 September 1976. Data were collected by the U.S. Fish...

  4. Marine bird colony and other data from platforms in the Bering Sea as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 15 June 1975 to 15 October 1976 (NODC Accession 7700654)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird colony and other data were collected from platforms in the Bering Sea from 15 June 1975 to 15 October 1976. Data were collected by the College of the...

  5. Marine animal sighting and census data from the RESOLUTE and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 15 June 1971 to 29 September 1977 (NCEI Accession 7800682)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from the RESOLUTE and other platforms from 15 June 1971 to 29 September 1977. Data were collected by the...

  6. Marine animal sighting and census data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 12 May 1975 to 22 August 1975 (NODC Accession 7601354)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from aircraft and other platforms from 12 May 1975 to 22 August 1975. Data were collected by the Institute of...

  7. Oceanographic station, meteorological, and other data from bottle casts from the DELAWARE II and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 17 February 1982 to 11 June 1982 (NODC Accession 8200238)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic station, meteorological, and other data were collected from bottle casts from the DELEWARE II and other platforms from 17 February 1982 to 11 June...

  8. Current and other data from meters attached to fixed platforms in the Gulf of Alaska as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 13 May 1979 to 29 July 1979 (NODC Accession 8000542)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current and other data were collected from meters attached to fixed platforms in the Gulf of Alaska by the University of Alaska - Fairbanks; Institute of Marine...

  9. Wind direction and other data from fixed platforms from Point Lay and other locations as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 01 August 1981 to 30 September 1981 (NODC Accession 8200172)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Wind direction and other data were collected from fixed platforms from Point Lay and other locations from 01 August 1981 to 30 September 1981. Data were collected...

  10. Marine toxic substance and other data from grab casts from the ACONA and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 01 July 1974 to 31 August 1978 (NODC Accession 8100533)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine toxic substance and other data were collected from grab casts from the ACONA and other platforms from 01 July 1974 to 31 August 1978. Data were collected by...

  11. Marine toxic substance and other data from bottle casts from the DISCOVERER and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 11 November 1977 to 01 August 1978 (NODC Accession 7900267)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine toxic substance and other data were collected from bottle casts from the DISCOVERER and other platforms from 11 November 1977 to 01 August 1978. Data were...

  12. Temperature profiles from XBT casts from the MARINE EVANGELINE and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 07 November 1978 to 24 November 1978 (NODC Accession 7800870)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the MARINE EVANGELINE and other platforms from 07 November 1978 to 24 November 1978. Data were collected by...

  13. Pressure gauge and other data from fixed platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 01 June 1976 to 13 September 1976 (NODC Accession 7700420)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Pressure gauge data were collected from fixed platforms from 01 June 1976 to 13 September 1976. Data were collected by the University of Washington (UW) as part of...

  14. Feeding flock and other data from ACONA and other platforms from the Bering Sea and other locations as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 04 August 1975 to 16 September 1976 (NODC Accession 7700775)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Feeding flock and other data were collected from the ACONA and other platforms in the Bering Sea and other locations. Data were collected by Oregon State University...

  15. Pressure gauge data from the NOAA Ship DISCOVERER and other platforms in the Bering Sea and other locations as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 04 August 1983 to 20 September 1983 (NODC Accession 8500087)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Pressure gauge data were collected in the Bering Sea and other locations from the NOAA Ship DISCOVERER and other platforms from 04 August 1983 to 20 September 1983....

  16. Fish pathology and other data from the NOAA Ship MILLER FREEMAN and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 02 September 1976 to 27 August 1978 (NODC Accession 8000026)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish Pathology and other data were collected from the NOAA Ship MILLER FREEMAN and other platforms from 02 September 1976 to 27 August 1978. Data were collected by...

  17. Fish survey, fishing duration, and other data from net trawls from the BARGE and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 30 May 1977 to 13 October 1977 (NODC Accession 7800268)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish survey, fishing duration, and other data were collected from net trawls from the BARGE and other platforms from 30 May 1977 to 13 October 1977. Data were...

  18. Fish survey, fishing duration, and other data from net trawls from the MILLER FREEMAN and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 03 May 1975 to 04 August 1976 (NODC Accession 7800029)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish survey, fishing duration, and other data were collected from net trawls from the MILLER FREEMAN and other platforms from 03 May 1975 to 04 August 1976. Data...

  19. Temperature profiles from XBT casts from the DELTA SUD and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 09 August 1975 to 02 October 1975 (NODC Accession 7501218)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the DELTA SUD and other platforms from 09 August 1975 to 02 October 1975. Data were collected by the Delta...

  20. Temperature profiles from XBT casts from the DELTA SUD and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 18 November 1974 to 23 December 1974 (NODC Accession 7500059)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the DELTA SUD and other platforms from 18 November 1974 to 23 December 1974. Data were collected by the...

  1. Marine bird sighting, wind, and other data from the DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 02 July 1975 to 01 September 1978 (NODC Accession 7800821)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting, wind, and other data were collected from the DISCOVERER and other platforms from 02 July 1975 to 01 September 1978. Data were collected by the...

  2. Marine bird sighting and other data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 18 June 1975 to 04 April 1976 (NODC Accession 7800721)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from aircraft and other platforms from 18 June 1975 to 04 April 1976. Data were collected by the Fish and...

  3. Marine bird sighting and other data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 07 March 1977 to 19 September 1977 (NODC Accession 7800158)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from aircraft and other platforms from 07 March 1977 to 19 September 1977. Data were collected by the Alaska...

  4. Marine bird sighting and other data from platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 28 May 1978 to 09 September 1978 (NODC Accession 8100312)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from platforms from 28 May 1978 to 09 September 1978. Data were collected by the University of California (UC) as...

  5. Marine bird sighting and other data from the DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 12 May 1976 to 02 September 1976 (NODC Accession 7601745)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the DISCOVERER and other platforms from 12 May 1976 to 02 September 1976. Data were collected by Oregon...

  6. Marine bird sighting and other data from platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 01 June 1977 to 09 September 1977 (NODC Accession 7900255)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from platforms from 01 June 1977 to 09 September 1977. Data were collected by the University of California (UC)...

  7. Marine bird sighting and other data from platforms in the Beaufort Sea as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 11 June 1975 to 05 September 1975 (NODC Accession 7601518)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from platforms in the Beaufort Sea from 11 June 1975 to 05 September 1975. Data were collected by the University...

  8. Marine bird sighting and other data from the DISCOVERER and other platforms from the Bering Sea as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 20 August 1975 to 04 August 1977 (NODC Accession 7900090)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the DISCOVERER and other platforms in the Bering Sea from 20 August 1975 to 04 August 1977. Data were...

  9. Marine bird sighting and other data from the NOAA Ship DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 07 July 1977 to 05 June 1981 (NODC Accession 8100693)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the NOAA Ship DISCOVERER and other platforms from 07 July 1977 to 05 June 1981. Data were collected by the...

  10. Marine bird sighting and other data from platforms in the Beaufort Sea as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 08 June 1976 to 17 September 1976 (NODC Accession 7700308)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from platforms in the Beaufort Sea from 08 June 1976 to 17 September 1976. Data were collected by the University...

  11. Marine bird sighting and other data from the BARGE and other platforms from Beaufort Sea and other locations as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 07 May 1976 to 15 October 1976 (NODC Accession 7800031)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the BARGE and other platforms from the Beaufort Sea and other locations from 07 May 1976 to 15 October 1976....

  12. Marine bird sighting and other data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 25 April 1978 to 27 September 1978 (NODC Accession 7900210)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from aircraft and other platforms from 25 April 1978 to 27 September 1978. Data were collected by the University...

  13. Marine bird sighting and other data from platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 17 June 1976 to 31 August 1976 (NODC Accession 7800255)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from platforms from 17 June 1976 to 31 August 1976. Data were collected by the Alaska State Department of Fish...

  14. Marine bird sighting and other data from the GLACIER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 02 August 1977 to 06 September 1977 (NODC Accession 8100583)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the GLACIER and other platforms from 02 August 1977 to 06 September 1977. Data were collected by the Point...

  15. Marine bird sighting and other data from the BURTON ISLAND and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 30 July 1975 to 12 August 1978 (NODC Accession 7800157)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the BURTON ISLAND and other platforms from 30 July 1975 to 12 August 1978. Data were collected by the Point...

  16. Marine bird sighting and other data from aircraft and other platforms from the Bering Sea and North Pacific as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 09 February 1976 to 01 October 1976 (NODC Accession 7800904)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from aircraft and other platforms in the Bering Sea and North Pacific. Data were collected by the Fish and...

  17. Marine bird sighting and other data from platform as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 08 May 1977 to 18 September 1977 (NODC Accession 7700778)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from a platform from 08 May 1977 to 18 September 1977. Data were collected by the University of Alaska; Institute...

  18. Marine bird sighting and other data from the COMMANDO and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 16 May 1978 to 09 September 1978 (NODC Accession 8100584)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the COMMANDO and other platforms from 6 May 1978 to 09 September 1978. Data were collected by the Fish and...

  19. Marine bird sighting and other data from the DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 05 June 1975 to 20 August 1976 (NODC Accession 7800486)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the DISCOVERER and other platforms. Data were collected as part of the Outer Continental Shelf Environmental...

  20. Marine bird sighting and other data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 21 April 1975 to 05 October 1977 (NODC Accession 7800812)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from aircraft and other platforms from 21 April 1975 to 05 October 1977.. Data were collected by the Fish and...

  1. Marine animal sighting and census data from aircraft and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 22 November 1977 to 21 August 1979 (NODC Accession 8000047)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from aircraft and other platforms from 22 November 1977 to 21 August 1979. Data were collected by the Alaska...

  2. Marine bird sighting and other data from platform in the Bering Sea as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 06 May 1976 to 19 August 1976 (NODC Accession 7700132)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from a platform in the Bering Sea from 06 May 1976 to 19 August 1976. Data were collected by the University of...

  3. Marine bird sighting and other data from platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 06 June 1977 to 23 September 1977 (NODC Accession 7900213)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from platforms from 06 June 1977 to 23 September 1977. Data were collected by LGL LTD. as part of the Outer...

  4. Marine bird sighting and other data from the DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 15 April 1976 to 19 August 1976 (NODC Accession 7601827)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the DISCOVERER and other platforms from 15 April 1976 to 19 August 1976. Data were collected by Oregon State...

  5. Temperature profiles from XBT casts from the ALBATROSS IV and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) and WARM CORE RINGS projects from 23 September 1981 to 29 November 1982 (NODC Accession 8200241)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the ALBATROSS IV and other platforms from 23 September 1981 to 29 November 1982. Data were collected by the...

  6. Marine bird sighting, marine toxic substance, and other data from the DISCOVERER and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 25 March 1976 to 02 May 1978 (NODC Accession 7900171)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting, marine toxic substance, and other data were collected from the DISCOVERER and other platforms from 25 March 1976 to 02 May 1978. Data were...

  7. Marine toxic substance and other data from bottle casts from the NOAA Ship DISCOVERER and other platforms as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 22 March 1977 to 18 August 1978 (NODC Accession 8000246)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine toxic substance and other data were collected from bottle casts from the NOAA Ship DISCOVERER and other platforms from 22 March 1977 to 18 August 1978. Data...

  8. Temperature profiles from XBT casts from the AMERICAN ARGO and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 26 June 1980 to 09 September 1980 (NODC Accession 8000474)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the AMERICAN ARGO and other platforms from 26 June 1980 to 09 September 1980. Data were collected by...

  9. Marine bird sighting and other data from platform from Kotzebue Sound as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 10 July 1976 to 10 September 1977 (NODC Accession 7900079)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from a platform in the Kotzebue Sound from 10 July 1976 to 10 September 1977. Data were collected by the...

  10. Marine mammal specimen and other data from the SURVEYOR and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 20 March 1977 to 02 November 1977 (NODC Accession 7900319)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine mammal specimen and other data were collected from the SURVEYOR and other platforms from 20 March 1977 to 02 November 1977. Data were collected by the Alaska...

  11. Oceanographic station, meteorological, and other data from bottle casts from the DAN BRAMAN and other platforms as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project from 07 May 1971 to 25 August 1971 (NODC Accession 7201264)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic station, meteorological, and other data were collected from bottle casts from the DAN BRAMAN and other platforms from 07 May 1971 to 25 August 1971....

  12. Inter platform power distribution

    International Nuclear Information System (INIS)

    In today's world of high operating costs and low oil prices new methods of construction are needed to ensure economic viability. One such was is to maximize the use of an existing infrastructure. Marathon utilized power generated on Brae A and Brae B to supply the requirements of East Brae using transfer by 33kV sub-sea cable. First oil was produced in December 1993. This resulted in platform weight savings of around 3,000 tonnes, with cost savings in excess of Brit-pounds 60 million

  13. Peptide-Decorated Gold Nanoparticles as Functional Nano-Capping Agent of Mesoporous Silica Container for Targeting Drug Delivery.

    Science.gov (United States)

    Chen, Ganchao; Xie, Yusheng; Peltier, Raoul; Lei, Haipeng; Wang, Ping; Chen, Jun; Hu, Yi; Wang, Feng; Yao, Xi; Sun, Hongyan

    2016-05-11

    A stimuli-responsive drug delivery system (DDS) with bioactive surface is constructed by end-capping mesoporous silica nanoparticles (MSNs) with functional peptide-coated gold nanoparticles (GNPs). MSNs are first functionalized with acid-labile α-amide-β-carboxyl groups to carry negative charges, and then capped with positively charged GNPs that are decorated with oligo-lysine-containing peptide. The resulting hybrid delivery system exhibits endo/lysosomal pH triggered drug release, and the incorporation of RGD peptide facilitates targeting delivery to αvβ3 integrin overexpressing cancer cells. The system can serve as a platform for preparing diversified multifunctional nanocomposites using various functional inorganic nanoparticles and bioactive peptides. PMID:27102225

  14. Genetically designed biomolecular capping system for mesoporous silica nanoparticles enables receptor-mediated cell uptake and controlled drug release

    CERN Document Server

    Datz, Stefan; Gattner, Michael; Weiss, Veronika; Brunner, Korbinian; Bretzler, Johanna; von Schirnding, Constantin; Spada, Fabio; Engelke, Hanna; Vrabel, Milan; Bräuchle, Christoph; Carell, Thomas; Bein, Thomas

    2015-01-01

    Effective and controlled drug delivery systems with on-demand release and targeting abilities have received enormous attention for biomedical applications. Here, we describe a novel enzyme-based cap system for mesoporous silica nanoparticles (MSNs) that is directly combined with a targeting ligand via bio-orthogonal click chemistry. The capping system is based on the pH-responsive binding of an aryl-sulfonamide-functionalized MSN and the enzyme carbonic anhydrase (CA). An unnatural amino acid (UAA) containing a norbornene moiety was genetically incorporated into CA. This UAA allowed for the site-specific bio-orthogonal attachment of even very sensitive targeting ligands such as folic acid and anandamide. This leads to specific receptor-mediated cell and stem cell uptake. We demonstrate the successful delivery and release of the chemotherapeutic agent Actinomycin D to KB cells. This novel nanocarrier concept provides a promising platform for the development of precisely controllable and highly modular theranos...

  15. ATLAS end-caps 
on the move

    CERN Multimedia

    2007-01-01

    Two delicate and spectacular transport operations have been performed for ATLAS in recent weeks: the first end-cap tracker was installed in its final position, and one of the huge end-caps of the toroid magnet was moved to the top of the experiment’s shaft.

  16. 47 CFR 52.109 - Permanent cap on number reservations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Permanent cap on number reservations. 52.109... (CONTINUED) NUMBERING Toll Free Numbers § 52.109 Permanent cap on number reservations. (a) A Responsible Organization may have in reserve status, at any one time, either 2000 toll free numbers or 7.5 percent of...

  17. Regulating Telecommunications : Lessons from U.S. Price Cap Experience

    OpenAIRE

    Jeffrey H. Rohlfs

    1996-01-01

    Price cap regulation uses a formula, set in advance, to determine the price increases for a firm's services for a period of several years. During this period, the firm may keep all the benefits of its incremental productivity gains. Customers can also benefit because the price cap formula may cause prices to rise less rapidly during the period. The sharpened incentives created may encourag...

  18. Analyses of Current And Wave Forces on Velocity Caps

    DEFF Research Database (Denmark)

    Christensen, Erik Damgaard; Buhrkall, Jeppe; Eskesen, Mark C. D.;

    2015-01-01

    Velocity caps are often used in connection with for instance offshore intake sea water for the use of for cooling water for power plants or as a source for desalinization plants. The intakes can also be used for river intakes. The velocity cap is placed on top of a vertical pipe. The vertical pipe...

  19. Financial caps for oil pollution damage: A historical mistake?

    OpenAIRE

    Faure, M.; Hui, W

    2008-01-01

    The limitation of liability (known as financial caps) of the ship owner has a long tradition in maritime law in general and in the marine oil pollution compensation regime in particular. This paper uses the economic instrument to critically analyze such a mechanism, in order to answer the question if the financial caps are indeed a historical mistake.

  20. Investigation of sampling tubes of end-cap shower counter

    International Nuclear Information System (INIS)

    The measurement and investigation were conducted for the performances of sampling tubes of end-cap shower counter in BES. It is shown that the self-quenching streamer tube with 12.8 x 12.8 (1 + 2 + 1) is suitable for end-cap shower counter

  1. IN SITU REMEDIATION OF CONTAMINATED SEDIMENTS - ACTIVE CAPPING TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Knox, A.; Roberts, J.; Paller, M.; Reible, D.

    2010-09-02

    Active capping is a relatively new approach for treating contaminated sediments. It involves applying chemically reactive amendments to the sediment surface. The main role of active caps is to stabilize contaminants in contaminated sediments, lower the bioavailable pool of contaminants, and reduce the release of contaminants to the water column. Metals are common contaminants in many marine and fresh water environments as a result of industrial and military activities. The mobile, soluble forms of metals are generally considered toxic. Induced chemical precipitation of these metals can shift toxic metals from the aqueous phase to a solid, precipitated phase which is often less bioavailable. This approach can be achieved through application of sequestering agents such as rock phosphates, organoclays, zeolites, clay minerals, and biopolymers (e.g., chitosan) in active capping technology. Active capping holds great potential for a more permanent solution that avoids residual risks resulting from contaminant migration through the cap or breaching of the cap. In addition to identifying superior active capping agents, research is needed to optimize application techniques, application rates, and amendment combinations that maximize sequestration of contaminants. A selected set of active capping treatment technologies has been demonstrated at a few sites, including a field demonstration at the Savannah River Site, Aiken, SC. This demonstration has provided useful information on the effects of sequestering agents on metal immobilization, bioavailability, toxicity, and resistance to mechanical disturbance.

  2. CAPweb: a bioinformatics CGH array Analysis Platform

    OpenAIRE

    Liva, Stéphane; Hupé, Philippe; Neuvial, Pierre; Brito, Isabel; Viara, Eric; La Rosa, Philippe; Barillot, Emmanuel

    2006-01-01

    Assessing variations in DNA copy number is crucial for understanding constitutional or somatic diseases, particularly cancers. The recently developed array-CGH (comparative genomic hybridization) technology allows this to be investigated at the genomic level. We report the availability of a web tool for analysing array-CGH data. CAPweb (CGH array Analysis Platform on the Web) is intended as a user-friendly tool enabling biologists to completely analyse CGH arrays from the raw data to the visu...

  3. Progress in LAr EndCap Calorimetry: News from the Hadronic EndCap Group.

    CERN Multimedia

    Oram, C.J.

    With module production and testing completed for the Hadronic EndCap calorimeter, the attention of the HEC group is heavily directed towards wheel assembly in building 180. Three of the four HEC wheels are now assembled and rotated, and work is progressing on assembling the final wheel. This year has been a busy year for the installation of components in the EndCap C cryostat: the signal feedthrough installation was completed April 22nd, the pre-sampler shortly thereafter and the Electro-Magnetic EndCap August 13th. This allowed the HEC group to start transferring the HEC wheels from the T6A storage cradle into the cryostat. The operation started in mid-September and has progressed, on or ahead of schedule, since then with the major milestones being: Insertion of 67 ton front HEC wheel October 3rd Insertion of 90 ton rear HEC wheel October 22nd. The wheel alignment has proved to be excellent, with the position of the centre of the front(rear) wheel with respect to the nominal position being displaced b...

  4. Nano-sized calcium phosphate (CaP) carriers for non-viral gene deilvery

    International Nuclear Information System (INIS)

    Highlights: ► Nanostructured calcium phosphates (NanoCaPs): comprehensive review. ► Non viral gene delivery mechanisms: detailed mechanisms are outlined. ► Barriers to non-viral gene delivery: detailed barriers are discussed. - Abstract: Gene therapy has garnered much interest due to the potential for curing multiple inherited and/or increases in the acquired diseases. As a result, there has been intense activity from multiple research groups for developing effective delivery methods and carriers, which is a critical step in advancing gene delivery technologies. In order for the carriers to effectively deliver the genetic payloads, multiple extracellular and intracellular barriers need to be overcome. Although overcoming these challenges to improve the effectiveness is critical, the development of safe gene delivery agents is even more vital to assure its use in clinical applications. The development of safe and effective strategies has therefore been a major challenge impeding gene therapy progress. In this regard, calcium phosphate (CaP) based nano-particles has been considered as one of the candidate non-viral gene delivery vehicles, but has been plagued by inconsistent and low transfection efficiencies limiting its progress. There has been major research effort to improve the consistency and effectiveness of CaP based vectors. Currently, it is therefore thought that by controlling the various synthesis factors such as Ca/P ratio, mode of mixing, and type of calcium phosphate phase, such variability and inefficiency could be modulated. This review attempts to provide a comprehensive analysis of the current research activity in the development of CaP based ceramic and polymer-ceramic hybrid systems for non-viral gene delivery. Preliminary transfection results of hydroxyapatite (HA or NanoCaPs), amorphous calcium phosphate (ACP) and brushite phases are also compared to assess the effect of various CaP phases, and correspondingly, changes in the dissolution

  5. Deterministic assembly of linear gold nanorod chains as a platform for nanoscale applications

    DEFF Research Database (Denmark)

    Rey, Antje; Billardon, Guillaume; Loertscher, Emanuel;

    2013-01-01

    target substrate, thus establishing a platform for a variety of nanoscale electronic and optical applications ranging from molecular electronics to optical and plasmonic devices. As a first example, electrical measurements are performed on contacted gold nanorod chains before and after their immersion...... in a solution of thiol end-capped oligophenylenevinylene molecules showing an increase in the conductance by three orders of magnitude, indicating molecular-mediated transport....

  6. Non-methane hydrocarbon emissions from vehicle fuel caps

    Science.gov (United States)

    Batterman, Stuart A.; Yu, Yungdae; Jia, Chunrong; Godwin, Christopher

    Vehicles emit non-methane hydrocarbons (NMHCs) from a number of sources, including missing, worn or improperly tightened fuel caps. Inspection and maintenance programs and the On-Board Diagnostic (OBD) system will detect some of these deficiencies, however, even properly tightened caps will emit NMHCs due to permeation, diffusion, cracks and gaps in seals, and failures of pressure-relief mechanisms. These emissions have not been previously quantified. In this study, in-use emissions from fuel caps were measured in 213 tests on vehicles of varying age and condition over several seasons, including cold and warm temperatures. Diffusion/permeation models are presented to complement the experimental work. NMHC emissions from fuel caps were detected from all vehicles, of which benzene constituted 2.5%. Emissions averaged 2.0 mg h -1 (median=0.5 mg h -1), and the distribution of emission rates was highly skewed by a small number of vehicles with much higher emissions, e.g., the 90th, 95th and maximum percentile values were 2.7, 5.0, and 62.7 mg h -1, respectively. Emission rates increased substantially if the fuel cap was loose, in hot weather, and with vehicle age and mileage. Overall, emissions from properly functioning caps are small relative to running and refueling losses, though they may be significant if the gas cap is defective or loose. Further reductions in emissions may be achieved by using new low-torque cap designs, improved elastomers, properly tightening fuel caps, and replacing old caps.

  7. Rationale and design of the Baptist Employee Healthy Heart Study: a randomized trial assessing the efficacy of the addition of an interactive, personalized, web-based, lifestyle intervention tool to an existing health information web platform in a high-risk employee population

    OpenAIRE

    Post, Janisse M.; Ali, Shozab S.; Roberson, Lara L.; Ehimen C Aneni; Shaharyar, Sameer; Younus, Adnan; Jamal, Omar; Ahmad, Rameez; Aziz, Muhammad A.; Malik, Rehan; Spatz, Erica S.; Feldman, Theodore; Fialkow, Jonathan; Veledar, Emir; Ricardo C Cury

    2016-01-01

    Background Metabolic syndrome (MetS) and diabetes confer a high risk for developing subsequent cardiovascular disease (CVD). Persons with MetS constitute 24–34 % of the employee population at Baptist Health South Florida (BHSF), a self-insured healthcare organization. The Baptist Employee Healthy Heart Study (BEHHS) aims to assess the addition of a personalized, interactive, web-based, nutrition-management and lifestyle-management program to the existing health-expertise web platform availabl...

  8. ALICE Connex : Mobile Volunteer Computing and Edutainment Platform

    CERN Document Server

    Chalumporn, Gantaphon

    2016-01-01

    Mobile devices are very powerful and trend to be developed. They have functions that are used in everyday life. One of their main tasks is to be an entertainment devices or gaming platform. A lot of technologies are now accepted and adopted to improve the potential of education. Edutainment is a combination of entertainment and education media together to make use of both benefits. In this work, we introduce a design of edutainment platform which is a part of mobile volunteer computing and edutainment platform called ‘ALICE Connex’ for ALICE at CERN. The edutainment platform focuses to deliver enjoyment and education, while promotes ALICE and Volunteer Computing platform to general public. The design in this work describes the functionality to build an effective edutainment with real-time multiplayer interaction on round-based gameplay, while integrates seamless edutainment with basic particle physic content though game mechanism and items design. For the assessment method we will observe the enjoyment o...

  9. 75 FR 49527 - Caps Visual Communications, LLC; Black Dot Group; Formerly Known as Caps Group Acquisition, LLC...

    Science.gov (United States)

    2010-08-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Caps Visual Communications, LLC; Black Dot Group; Formerly Known as Caps Group Acquisition, LLC Chicago, IL; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance...

  10. cap alpha. -skeletal and. cap alpha. -cardiac actin genes are coexpressed in adult human skeletal muscle and heart

    Energy Technology Data Exchange (ETDEWEB)

    Gunning, P.; Ponte, P.; Blau, H.; Kedes, L.

    1983-11-01

    The authors determined the actin isotypes encoded by 30 actin cDNA clones previously isolated from an adult human muscle cDNA library. Using 3' untranslated region probes, derived from ..cap alpha.. skeletal, ..beta..- and ..gamma..-actin cDNAs and from an ..cap alpha..-cardiac actin genomic clone, they showed that 28 of the cDNAs correspond to ..cap alpha..-skeletal actin transcripts. Unexpectedly, however, the remaining two cDNA clones proved to derive from ..cap alpha..-cardiac actin mRNA. Sequence analysis confirmed that the two skeletal muscle ..cap alpha..-cardiac actin cDNAs are derived from transcripts of the cloned ..cap alpha..-cardiac actin gene. Comparison of total actin mRNA levels in adult skeletal muscle and adult heart revealed that the steady-state levels in skeletal muscle are about twofold greater, per microgram of total cellular RNA, than those in heart. Thus, in skeletal muscle and in heart, both of the sarcomeric actin mRNA isotypes are quite abundant transcripts. They conclude that ..cap alpha..-skeletal and ..cap alpha..-cardiac actin genes are coexpressed as an actin pair in human adult striated muscles. Since the smooth-muscle actins (aortic and stomach) and the cytoplasmic actins (..beta.. and ..gamma..) are known to be coexpressed in smooth muscle and nonmuscle cells, respectively, they postulate that coexpression of actin pairs may be a common feature of mammalian actin gene expression in all tissues.

  11. SR-71 Over Snow Capped Mountains

    Science.gov (United States)

    1995-01-01

    Dryden's SR-71B, NASA 831, slices across the snowy southern Sierra Nevada Mountains of California after being refueled by an Air Force Flight Test Center tanker during a recent flight. The Mach 3 aircraft are being flown by the Dryden Flight Research Center, Edwards, California as testbeds for high-speed, high-altitude aeronautical research. Capable of flying more than 2200 mph and at altitudes of over 85,000 feet, they are excellent platforms for research and experiments in aerodynamics, propulsion, structures, thermal protection materials, atmospheric studies, and sonic boom characterization.

  12. Rhapsody on small processor platforms

    OpenAIRE

    Andersson, Per-Oskar

    2008-01-01

    Rhapsody is a Model-Driven Development (MDD) tool for embedded and real-time system design. The purpose of this thesis is to determine if Rhapsody can be used for software development on small processor platforms such as the Atmel AVR. Rhapsody is normally used on platforms running an operating system. Therefore certain adaptations are needed in order to use it on platforms without an operating system. These adaptations and their affect on the usability of the tool, advantages and disadvantag...

  13. Reproducible Experiment Platform

    CERN Document Server

    Likhomanenko, Tatiana; Baranov, Alexander; Khairullin, Egor; Ustyuzhanin, Andrey

    2015-01-01

    Data analysis in fundamental sciences nowadays is an essential process that pushes frontiers of our knowledge and leads to new discoveries. At the same time we can see that complexity of those analyses increases fast due to a)~enormous volumes of datasets being analyzed, b)~variety of techniques and algorithms one have to check inside a single analysis, c)~distributed nature of research teams that requires special communication media for knowledge and information exchange between individual researchers. There is a lot of resemblance between techniques and problems arising in the areas of industrial information retrieval and particle physics. To address those problems we propose Reproducible Experiment Platform (REP), a software infrastructure to support collaborative ecosystem for computational science. It is a Python based solution for research teams that allows running computational experiments on shared datasets, obtaining repeatable results, and consistent comparisons of the obtained results. We present s...

  14. Energy Tracking Software Platform

    Energy Technology Data Exchange (ETDEWEB)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles

    2011-04-04

    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. EnergyIT.com is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. CompareAndConserve.com (Gainesville-Green.com) helps homeowners conserve energy through education and competition. ToolsForTenants.com helps renters factor energy usage into their housing decisions.

  15. Myofibril growth during cardiac hypertrophy is regulated through dual phosphorylation and acetylation of the actin capping protein CapZ.

    Science.gov (United States)

    Lin, Ying-Hsi; Warren, Chad M; Li, Jieli; McKinsey, Timothy A; Russell, Brenda

    2016-08-01

    The mechanotransduction signaling pathways initiated in heart muscle by increased mechanical loading are known to lead to long-term transcriptional changes and hypertrophy, but the rapid events for adaptation at the sarcomeric level are not fully understood. The goal of this study was to test the hypothesis that actin filament assembly during cardiomyocyte growth is regulated by post-translational modifications (PTMs) of CapZβ1. In rapidly hypertrophying neonatal rat ventricular myocytes (NRVMs) stimulated by phenylephrine (PE), two-dimensional gel electrophoresis (2DGE) of CapZβ1 revealed a shift toward more negative charge. Consistent with this, mass spectrometry identified CapZβ1 phosphorylation on serine-204 and acetylation on lysine-199, two residues which are near the actin binding surface of CapZβ1. Ectopic expression of dominant negative PKCɛ (dnPKCɛ) in NRVMs blunted the PE-induced increase in CapZ dynamics, as evidenced by the kinetic constant (Kfrap) of fluorescence recovery after photobleaching (FRAP), and concomitantly reduced phosphorylation and acetylation of CapZβ1. Furthermore, inhibition of class I histone deacetylases (HDACs) increased lysine-199 acetylation on CapZβ1, which increased Kfrap of CapZ and stimulated actin dynamics. Finally, we show that PE treatment of NRVMs results in decreased binding of HDAC3 to myofibrils, suggesting a signal-dependent mechanism for the regulation of sarcomere-associated CapZβ1 acetylation. Taken together, this dual regulation through phosphorylation and acetylation of CapZβ1 provides a novel model for the regulation of myofibril growth during cardiac hypertrophy. PMID:27185186

  16. ICP (ITER Collaborative Platform)

    International Nuclear Information System (INIS)

    The ITER organization has the necessity to manage a massive amount of data and processes. Each team requires different process and databases often interconnected with those of others teams. ICP (ITER Collaborative Platform) is the current central ITER repository of structured and unstructured data. All data in ICP is served and managed via a web interface that provides global accessibility with a common user friendly interface. This paper will explain the model used by ICP and how it serves the ITER project by providing a robust and agile platform. ICP is developed in ASP.NET using MSSQL Server for data storage. It currently houses 15 data driven applications, 150 different types of record, 500 k objects and 2.5 M references. During European working hours the system averages 150 concurrent users and 20 requests per second. ICP connects to external database applications to provide a single entry point to ITER data and a safe shared storage place to maintain this data long-term. The Core model provides an easy to extend framework to meet the future needs of the Organization. ICP follows a multi-tier architecture, providing logical separation of process. The standard three-tier architecture is expanded, with the data layer separated into data storage, data structure, and data access components. The business or applications logic layer is broken up into a common business functionality layer, a type specific logic layer, and a detached work-flow layer. Finally the presentation tier comprises a presentation adapter layer and an interface layer. Each layer is built up from small blocks which can be combined to create a wide range of more complex functionality. Each new object type developed gains access to a wealth of existing code functionality, while also free to adapt and extend this. The hardware structure is designed to provide complete redundancy, high availability and to handle high load. This document is made of the slides of the presentation. (authors)

  17. Power Quality Indices Estimation Platform

    Directory of Open Access Journals (Sweden)

    Eliana I. Arango-Zuluaga

    2013-11-01

    Full Text Available An interactive platform for estimating the quality indices in single phase electric power systems is presented. It meets the IEEE 1459-2010 standard recommendations. The platform was developed in order to support teaching and research activities in electric power quality. The platform estimates the power quality indices from voltage and current signals using three different algorithms based on fast Fourier transform (FFT, wavelet packet transform (WPT and least squares method. The results show that the algorithms implemented are efficient for estimating the quality indices of the power and the platform can be used according to the objectives established. 

  18. Preparing for a Product Platform

    DEFF Research Database (Denmark)

    Fiil-Nielsen, Ole; Munk, Lone; Mortensen, Niels Henrik

    2005-01-01

    visualization method could then be used as a tool for creating the product families, which product development platforms depend upon. Experience also tells us that one of the primary negative aspects of product developments platforms is the risk factor. When creating product development platforms companies...... invest a lot of time in the planning of future activities and make major decisions effecting the future products and production facilities. If the product development platform then fails to meet its expectations the companies loose almost everything they have invested. A tool for verifying the stability...

  19. In vitro cytotoxicity evaluation of different pulp capping materials: a comparative study.

    Science.gov (United States)

    Poggio, Claudio; Ceci, Matteo; Dagna, Alberto; Beltrami, Riccardo; Colombo, Marco; Chiesa, Marco

    2015-09-01

    Direct pulp capping covers the exposed surface of the pulp to maintain its vitality and preserve its functional and biologic activity. The aim of the present study was to compare the biocompatibility effects of seven different pulp-capping materials in vitro: Dycal®, Calcicur®, Calcimol LC®, TheraCal LC®, ProRoot MTA®, MTA-Angelus®, and Biodentine®. Using the Transwell insert methodology by Alamar blue test, we evaluated the cytocompatibility of the above mentioned materials towards murine odontoblasts cells (MDPC-23) at three different times (24, 48, and 72 h). For additional control, the cell viability at 72 hours was also assessed by MTT assay. Morphological analysis of murine odontoblasts was assessed by Confocal Laser Scanning Microscope. The results indicate significantly different biocompatibility among materials with different composition. Biodentine® and mineral trioxide aggregate (MTA)-based products showed lower cytotoxicity, varying from calcium hydroxide-based materials, which exhibited higher cytotoxicity. Although our findings are limited to in vitro conditions, the observation that Biodentine® caused a cytotoxic effect similar to MTA suggests that it may be considered an alternative in pulp-capping treatment, as calcium hydroxide-based materials present higher cytotoxic effects. PMID:26444338

  20. Electro-bioremediation of contaminated sediment by electrode enhanced capping.

    Science.gov (United States)

    Yan, Fei; Reible, Danny

    2015-05-15

    In-situ capping often eliminates or slows natural degradation of hydrocarbon due to the reducing conditions in the sediments. The purpose of this research was to demonstrate a reactive capping technique, an electrode enhanced cap, to produce favorable conditions for hydrocarbon degradation and evaluate this reactive capping technique for contaminated sediment remediation. Two graphite electrodes were placed horizontally at different layers in a cap and connected to external power of 2 V. Redox potentials increased and pH decreased around the anode. Phenanthrene concentration decreased and PAH degradation genes increased in the vicinity of the anode. Phenanthrene concentrations at 0-1 cm sediment beneath the anode decreased to ∼50% of initial concentration over ∼70 days, while phenanthrene levels in control reactor kept unchanged. A degradation model of electrode enhanced capping was developed to simulate reaction-diffusion processes, and model results show that a reaction-dominated region was created in the vicinity of the anode. Although the degradation dominated region was thin, transport processes in a sediment cap environment are typically sufficiently slow to allow this layer to serve as a permeable reactive barrier for hydrocarbon decontamination. PMID:25819321

  1. The CAMEO barium release - E/parallel/ fields over the polar cap

    Science.gov (United States)

    Heppner, J. P.; Miller, M. L.; Pongratz, M. B.; Smith, G. M.; Smith, L. L.; Mende, S. B.; Nath, N. R.

    1981-01-01

    Four successive thermite barium releases at an altitude of 965 km over polar cap invariant latitudes 84 to 76 deg near magnetic midnight were conducted from the orbiting second stage of the vehicle that launched Nimbus 7; the releases were made as part of the CAMEO (Chemically Active Material Ejected in Orbit) program. This was the first opportunity to observe the behavior of conventional barium release when conducted at orbital velocity in the near-earth magnetic field. The principal unexpected characteristic in the release dynamics was the high, 1.4 to 2.6 km/s, initial Ba(+) expansion velocity relative to an expected velocity of 0.9 km/s. Attention is also given to neutral cloud expansion, initial ion cloud expansion, convective motion, and the characteristics of field-aligned motion. The possibility of measuring parallel electric fields over the polar cap by observing perturbations in the motion of the visible ions is assessed.

  2. Mass changes in Arctic ice caps and glaciers: implications of regionalizing elevation changes

    DEFF Research Database (Denmark)

    Nilsson, Johan; Sørensen, Louise Sandberg; Barletta, Valentina Roberta; Forsberg, René

    2015-01-01

    regional mass balance of Arctic ice caps and glaciers to different regionalization schemes. The sensitivity analysis is based on studying the spread of mass changes and their associated errors, and the suitability of the different regionalization techniques is assessed through cross validation.The cross-validation...... results shows comparable accuracies for all regionalization methods, but the inferred mass changein individual regions, such as Svalbard and Iceland, can vary up to 4 Gt a-1, which exceeds the estimated errors by roughly50 % for these regions. This study further finds that this spread in mass balance is......The mass balance of glaciers and ice caps is sensitive to changing climate conditions. The mass changes derived n this study are determined from elevation changes derived measured by the Ice, Cloud, and land Elevation Satellite (ICESat) for the time period 2003–2009. Four methods, based on...

  3. State-of-the-art synthetic membrane for capping landfills

    International Nuclear Information System (INIS)

    Very Low Density Polyethylene (VLDPE) has emerged as a superior capping material for landfill closures. Landfills must be capped by a material which will undergo substantial deformation in areas of localized settlement prior to rupture. Methane and hydrogen sulfide gases must be contained and directed to collection points without permeating the landfill cap. Vegetative growth in the cover sods will be protected by the gas impermeability of the geosynthetic membrane. VLDPE compounded with carbon black is minimally affected by radiation and is inert to ultraviolet rays. This property sustains VLDPE's ability to retard gas permeation at levels superior to other geosynthetics. Cover soil stability on long cap slopes in all weather conditions is crucial. It has been demonstrated in the laboratory and in full-scale, on-site test conditions that VLDPE exhibits friction characteristics equaling or exceeding other synthetics used for this purpose without diminishing physical and chemical properties. Large-scale, multiaxial stress tests have demonstrated the ability of VLDPE to deflect substantially in all directions of a potential settlement area. Only PVC can equal the elastic deformation properties of VLDPE, but PVC is more gas-permeable susceptible to degradation due to natural soil radiation or ultraviolet light and heat. Test results are presented to illustrate these points. The geosynthetic cap membrane must prevent water percolation into the landfill to prevent the formation of hazardous leachates. The use of a VLDPE cap reduces the depth of cap soils, thus increasing landfill volume. The economics and reduction in long-term liabilities of closure costs are enhanced by the use of VLDPE in the cap system. Since the expected half-life of polyethylene exceeds hundreds of years, the inclusion of VLDPE in the cap system will provide pollution security for many generations

  4. Numerical modeling of experimental human fibrous cap delamination.

    Science.gov (United States)

    Leng, Xiaochang; Davis, Lindsey A; Deng, Xiaomin; Sutton, Michael A; Lessner, Susan M

    2016-06-01

    Fibrous cap delamination is a critical process during the rupture of atherosclerotic plaque, which often leads to severe life-threatening clinical consequences such as myocardial infarction or stroke. In this study a finite element modeling and simulation approach is presented that enables the study of fibrous cap delamination experiments for the purpose of understanding the fibrous cap delamination process. A cohesive zone model (CZM) approach is applied to simulate delamination of the fibrous cap from the underlying plaque tissue. A viscoelastic anisotropic (VA) model for the bulk arterial material behavior is extended from existing studies so that the hysteresis phenomenon observed in the fibrous cap delamination experiments can be captured. A finite element model is developed for the fibrous cap delamination experiments, in which arterial layers (including the fibrous cap and the underlying plaque tissue) are represented by solid elements based on the VA model and the fibrous cap-underlying plaque tissue interface is characterized by interfacial CZM elements. In the CZM, the delamination process is governed by an exponential traction-separation law which utilizes critical energy release rates obtained directly from the fibrous cap delamination experiments. A set of VA model parameter values and CZM parameter values is determined based on values suggested in the literature and through matching simulation predictions of the load vs. load-point displacement curve with one set of experimental measurements. Using this set of parameter values, simulation predictions for other sets of experimental measurements are obtained and good agreement between simulation predictions and experimental measurements is observed. Results of this study demonstrate the applicability of the viscoelastic anisotropic model and the CZM approach for the simulation of diseased arterial tissue failure processes. PMID:26897094

  5. Cap structures as diagnostic indicators of silcrete origin

    Science.gov (United States)

    Ullyott, J. Stewart; Nash, David J.; Huggett, Jennifer M.

    2015-07-01

    Cap structures within silcretes have long been used as a diagnostic indicator of pedogenic silicification. However, a growing number of studies of the micromorphology of non-pedogenic silcretes indicate that this may no longer be appropriate. This paper presents the first systematic investigation of the micro-fabric, geochemistry and mineralogy of cap structures in groundwater silcretes, through an analysis of conglomeratic varieties (puddingstones) from the southern UK. Our results suggest that cap structures in groundwater silcretes fall within a spectrum of types, related to the degree of sorting in the inter-gravel host sediment. At one end of this spectrum are well-defined caps within otherwise well-sorted, overgrowth-dominated silcretes. These caps exhibit a grain-supported fabric, are cemented by micro- and/or cryptocrystalline silica, and contain floating silt-sized quartz and Ti-oxide grains. We propose that these structures developed mainly as a result of in-washing of fine sediments that were subsequently silicified. At the other end of the spectrum are silcretes with caps defined by concentrations of Ti-oxide grains, as opposed to cement type and grain size. These formed mainly as a result of the remobilisation and precipitation of Ti during the silicification of gravels containing interstitial clay-rich sandy sediment. Between these end-members are silcretes with cap structures formed by a combination of in-washing and redistribution of fines plus some local remobilisation of Ti. Overall, the cap structures in this study exhibit a simple micromorphology, lacking the alternating Ti- and silica-rich lamellae typical of pedogenic silcrete. We conclude that the presence of cap structures alone should not be considered diagnostic of pedogenic silicification unless accompanied by other indicators such as a differentiated profile and abundant, complex, way-up structures within the micro-fabric.

  6. The evolution of office notes and the electronic medical record: The CAPS note.

    Science.gov (United States)

    Styron, Joseph F; Evans, Peter J

    2016-07-01

    The advent of the electronic medical record (EMR) combined with an expansion of information required by medicolegal and billing departments has transformed the progress note from a succinct note into an often unwieldy data-dump unable to concisely convey the physician's medical reasoning. We describe a new note format--CAPS, which stands for concern, assessment, plan, and supporting data--to streamline the communication of the patient's problem, the practitioner's assessment and plan, and the medical reasoning to support the plan. PMID:27399867

  7. A mini-cap for simultaneous EEG and fMRI recording in rodents.

    Science.gov (United States)

    Sumiyoshi, Akira; Riera, Jorge J; Ogawa, Takeshi; Kawashima, Ryuta

    2011-02-01

    Simultaneous recording of electroencephalography (EEG) and functional magnetic resonance imaging (fMRI) is now widely accepted as a prevailing tool to study brain functions. For over a decade, EEG caps with high-dense arrays of electrodes for EEG-fMRI studies in humans have been commercially available. However, simultaneous EEG and fMRI recording in rodents has been limited to only a few electrodes due mainly to two technical reasons, i.e. a small available scalp area and the proximity of the electrodes to the brain tissue. In this paper, we introduce both a new EEG mini-cap and a protocol to obtain whole scalp EEG recordings simultaneously with 7 T fMRI signals in rodents. We provide methodological protocol to evaluate a number of problems emerging from the particulars of using rodents in simultaneous EEG and fMRI recording. The quality and reproducibility of both EEG and fMRI signals were demonstrated using a conventional forepaw stimulation paradigm in Wistar rats. Based on this quantitative analysis, we conclude that simultaneous EEG-fMRI recordings are achievable in rodents without significant signal loss. In light of the contemporary transgenic models and advanced drug administration protocols in rodents, the proposed methodology could be remarkable as a futurist experimental platform. PMID:20920590

  8. Identifying Influential Scholars in Academic Social Media Platforms

    OpenAIRE

    Li N; Gillet D.

    2013-01-01

    The emergence of social media has created new ways to publish scientific work, foster collaboration, and build professional connections in the research community. The rich data collected in social media platforms has provided new opportunities for assessing scholars' impact other than the traditional citation-based approach. In this paper, we investigate the measures of scholars' influence in academic social media platforms, taking both academic and social impact into account. A real-life dat...

  9. Capítulo I: Contabilidad de costos - Capítulo II : Costos estimados

    OpenAIRE

    Rojas Medina, Ricardo Alfredo

    2014-01-01

    Me permito poner a su consideración los capítulos I y II del libro titulado: Costos un enfoque administrativo y de gerencia, contenido que fue realizado para mejorar y reestructurar el libro titulado Sistemas de costos un proceso para su implementación, que tuvo gran acogida dado el volumen de consulta y descarga del repositorio de la UN. En la primera unidad se trabaja lo referente a costos para la toma de decisiones, presentado un marco teórico y los fundamentos básicos del costeo direct...

  10. The impact of a retirement savings account cap.

    Science.gov (United States)

    VanDerhei, Jack

    2013-08-01

    This Issue Brief provides an initial analysis of the potential financial impact on private-sector retirement benefits of the retirement savings account cap included in the Obama administration's FY 2014 budget proposal. It finds that although a very small percentage of current 401(k) participants with IRA accounts have combined balances sufficient to be immediately affected by the proposed limit, over time (and depending on the applicable discount rates, whether a defined benefit pension is involved, and the size of the 401(k) plan) the impact could be much greater. Simulation results for 401(k) participants assuming no defined benefit accruals and no job turnover show that more than 1 in 10 current 401(k) participants are likely to hit the proposed limit sometime prior to age 65, even at the current historically low discount rate of 4 percent. When the simulation is rerun with discount rate assumptions closer to historical averages, the percentage of 401(k) participants likely to be affected by these proposed limits increases substantially: For example, with an 8 percent discount rate, more than 20 percent of the 401(k) participants are simulated to reach the limit prior to retirement. When the impact of stylized, defined benefit account assumptions are added to the analysis, the percentage of 401(k) participants simulated to reach the proposed limits increases even more: In fact, for 401(k) participants assumed to be covered by a 2 percent, three-year, final-average plan with a subsidized early retirement at 62, nearly a third are assumed to be affected by the proposed limit at an 8 percent discount rate. Additional analysis is performed for small plans (those with less than 100 participants) to assess the potential impact of eventual plan terminations if an when the owners and/or key decision makers of the firms reach the cap threshold. Depending on plan size, this may involve as few as 18 percent of the firms (at a 4 percent discount rate) to as many as 75

  11. Identification of Cytoplasmic Capping Targets Reveals a Role for Cap Homeostasis in Translation and mRNA Stability

    Directory of Open Access Journals (Sweden)

    Chandrama Mukherjee

    2012-09-01

    Full Text Available The notion that decapping leads irreversibly to messenger RNA (mRNA decay was contradicted by the identification of capped transcripts missing portions of their 5′ ends and a cytoplasmic complex that can restore the cap on uncapped mRNAs. In this study, we used accumulation of uncapped transcripts in cells inhibited for cytoplasmic capping to identify the targets of this pathway. Inhibition of cytoplasmic capping results in the destabilization of some transcripts and the redistribution of others from polysomes to nontranslating messenger ribonucleoproteins, where they accumulate in an uncapped state. Only a portion of the mRNA transcriptome is affected by cytoplasmic capping, and its targets encode proteins involved in nucleotide binding, RNA and protein localization, and the mitotic cell cycle. The 3′ untranslated regions of recapping targets are enriched for AU-rich elements and microRNA binding sites, both of which function in cap-dependent mRNA silencing. These findings identify a cyclical process of decapping and recapping that we term cap homeostasis.

  12. How Important is Export-Platform FDI?

    DEFF Research Database (Denmark)

    Geishecker, Ingo; Nielsen, Jørgen Ulff-Møller; Pawlik, Konrad

    This paper investigates the link between export performance and multinational enterprise presence utilizing trade and industry data for Polish manufacturing industries for the years 1994-2002. Decomposing trade into final and intermediate goods and assessing the impact of foreign-owned capital on...... the respective export performance of Polish industries, we suggest a significant role of export-platform FDI into Poland, while the importance of FDI for vertical integration is limited suggesting that the sourcing of intermediate goods from Poland primarily occurs through arm's-length contractual...... outsourcing instead of in-house sourcing of multinational enterprises. The paper also suggests that over the sample period, where Poland has evolved into a relatively stable economic environment, the role of export-platform FDI has increased significantly.  ...

  13. NASA Airborne Science Program: NASA Stratospheric Platforms

    Science.gov (United States)

    Curry, Robert E.

    2010-01-01

    The National Aeronautics and Space Administration conducts a wide variety of remote sensing projects using several unique aircraft platforms. These vehicles have been selected and modified to provide capabilities that are particularly important for geophysical research, in particular, routine access to very high altitudes, long range, long endurance, precise trajectory control, and the payload capacity to operate multiple, diverse instruments concurrently. While the NASA program has been in operation for over 30 years, new aircraft and technological advances that will expand the capabilities for airborne observation are continually being assessed and implemented. This presentation will review the current state of NASA's science platforms, recent improvements and new missions concepts as well as provide a survey of emerging technologies unmanned aerial vehicles for long duration observations (Global Hawk and Predator). Applications of information technology that allow more efficient use of flight time and the ability to rapidly reconfigure systems for different mission objectives are addressed.

  14. Tension leg platform project execution

    Institute of Scientific and Technical Information of China (English)

    Zhang Dagang; Wang Chunsheng; Zhang Tianyu

    2013-01-01

    The first floating platform concept design work for South China Sea is undergoing in DMAR' s office now.This tension leg platform has potential to become the first advanced floating production platform project.Project execution is always a challenge for floating system.This paper focuses on the critical elements of project execution for tension leg platform,and studies potential implications to future oil and gas exploration in South China Sea.There are many factors affecting successful execution of floating system project,including technical issues,engineering management,interface management,etc.There are also failure examples of project execution in the industry.The author has participated 28 large detailed projects and has gained extensive experience on floating projects,with ample hands-on project experiences.A detailed tension leg platform project study example and discussions in depth are presented for future project execution in China deepwater development.

  15. Utilizing platforms in industrialized construction

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hvam, Lars

    2015-01-01

    Purpose – The purpose of this paper is to explore the development of a platform-based project execution in the industrialised construction sector, with a focus on systematically balancing cost and value. Offering custom-tailored buildings at reasonable costs has been a growing concern for many...... construction companies. A promising approach adapted by operations management and design theory regards individual building projects as the adjustment and recombination of components and processes from a set of predefined platforms, while configuration systems assure feasible building solutions. Design...... platform strategies, this research highlights key aspects of adapting platform-based developed theory to industrialised construction. Building projects use different layers of product, process and logistics platforms to form the right cost – value ratio for the target market application, while modelling...

  16. ADAPTABLE ALTERNATE REALITY GAMES PLATFORM

    Directory of Open Access Journals (Sweden)

    Liviu-Adrian Cotfas

    2013-12-01

    Full Text Available In this paper, we present an alternate reality games platform that facilitates the creation of ARG projects with different themes and sizes. The platform is well integrated with the most important social media networks, thus facilitating both the involvement of the public and the creation of a more engaging interaction for the participants. A cloud-based architecture was used in order to allow the platform to easily accommodate projects of various sizes and to provide a good level of scalability. The platform is fully localizable in any language and multiple languages can be used at once to create projects that target users from different countries. An initial project that uses gamification to create an immersive learning environment has been created around the developed platform. The project combines professional and public feedback in order to provide an enhanced learning experience.

  17. Carpentier, la otra novela (cap. IV

    Directory of Open Access Journals (Sweden)

    Urbano Martínez Carmenate

    2014-06-01

    Full Text Available El presente ensayo está extraído de la obra inédita de Urbano Martínez Carmenate, Carpentier, la otra novela (cap. IV. Ofrece una mirada sobre los primeros años de la trayectoria profesional de Alejo Carpentier. Se muestra cómo, durante la década de 1920, se inicia como periodista y cronista teatral. A la vez, comienzan sus conexiones con el Grupo Minorista, que desempeña un papel destacado en la etapa republicana en Cuba. También se contempla su viaje a México en 1926, que constituye su primer contacto directo con la naturaleza y la cultura americanas. ________________________________________________________________________________________ Carpentier, la otra novela (4th Chap. Abstract: The present essay is an extract from Urbano Martínez Carmenate´s unpublished work, Carpentier, la otra novela (4th Chap., which provides a deep gaze over Carpentier’s first years of professional career. This essay also shows how he began to work as a journalist and to write theatre reviews during the '20s, its initial connections with the Minority Group, which played an important role in the Cuban republican period, and his trip to Mexico in 1926, which sets up his first direct contact the American nature and culture. Keywords: Alejo Carpentier; journalist; minorism; American nature; autodidacticism; the '20s ________________________________________________________________________________________ Carpentier, la otra novela (chap. IV Résumé: Cet essai, qui est extrait (chap. IV de l’ouvrage inédit d’Urbano Martínez Carmenate, Carpentier, la otra novela, offre un regard sur les premières années de la trajectoire professionnelle d’Alejo Carpentier. Il y est question de ses débuts en tant que journaliste et chroniqueur théâtral, au cours des années 1920, ainsi que des connexions qu’il établit avec le Groupe Minoriste, qui joua un rôle de premier ordre lors de l’étape républicaine à Cuba. Est aussi abordé son voyage au Mexique

  18. Reproducible Experiment Platform

    Science.gov (United States)

    Likhomanenko, Tatiana; Rogozhnikov, Alex; Baranov, Alexander; Khairullin, Egor; Ustyuzhanin, Andrey

    2015-12-01

    Data analysis in fundamental sciences nowadays is an essential process that pushes frontiers of our knowledge and leads to new discoveries. At the same time we can see that complexity of those analyses increases fast due to a) enormous volumes of datasets being analyzed, b) variety of techniques and algorithms one have to check inside a single analysis, c) distributed nature of research teams that requires special communication media for knowledge and information exchange between individual researchers. There is a lot of resemblance between techniques and problems arising in the areas of industrial information retrieval and particle physics. To address those problems we propose Reproducible Experiment Platform (REP), a software infrastructure to support collaborative ecosystem for computational science. It is a Python based solution for research teams that allows running computational experiments on shared datasets, obtaining repeatable results, and consistent comparisons of the obtained results. We present some key features of REP based on case studies which include trigger optimization and physics analysis studies at the LHCb experiment.

  19. NON AUTOMATICALLY EXERCISED (NAE EUROPEAN CAPPED CALL PRICING THEORY

    Directory of Open Access Journals (Sweden)

    Subanar .

    2012-07-01

    Full Text Available The objective of this paper is to present a methodology for deriving Black Scholes formulae via a simple lognormal distribution approach and introduce European capped non automatically exercise (NAE call option pricing theory.

  20. Download - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...atabase Description Download License Update History of This Database Site Policy | Contact Us Download - RGP caps | LSDB Archive ...

  1. C-CAP Land Cover, Kauai, Hawaii 2005

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  2. Study of photophysical properties of capped CdS nanocrystals

    International Nuclear Information System (INIS)

    Here, we have examined the role of capping agent on the optical properties of CdS nanoparticles by steady-state and time-resolved photoluminescence (PL) spectroscopy. The estimated particles sizes are 3.45, 2.5 and 2.39 nm for uncapped, capped with silica (SiO2) and thiosalicylic acid (TSA), respectively. The absorption and emission spectra show a clear blue shift to shorter wavelengths in presence of TSA- and SiO2-capped nanoparticles. It is found that the average decay time are 6.24, 4.54 and 2.84 ns for uncapped, capped with SiO2 and TSA nanoparticles, respectively. Our analysis suggests that the hole or the electron is trapped on thiol molecule of TSA or hydroxyl group of SiO2, then radiative recombination of the electron and hole is delayed, resulting in strong quenching of PL efficiency

  3. Anacostia Park Data Landcover Product - NOAA C-CAP Source

    Data.gov (United States)

    National Park Service, Department of the Interior — NPScape CCAP landcover (CCAP_LAC - 1996, 2001 and 2006) and landcover change (CCAP_LCC) products. Landcover change is produced from the 1996-2001 NOAA C-CAP and...

  4. C-CAP Land Cover, Big Island, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  5. 2011 C-CAP Land Cover of Oahu, Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  6. ATLAS - End-Cap calorimeter lowered in to the cavern

    CERN Multimedia

    IT-UDS Audiovisual Services

    2006-01-01

    The End-cap calorimeter was lowered into the ATLAS cavern at POINT1. This calorimeter will measure the energy of particles close to the beam axis when protons collide. Cooling is important for maximum detector efficiency.

  7. C-CAP Land Cover, Territory of Guam 2011

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  8. C-CAP Land Cover, Territory of Guam 2005

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine...

  9. A modified electrode cap for EEG recordings in MRI scanners.

    Science.gov (United States)

    Baumann, S B; Noll, D C

    1999-12-01

    A stretchable electrode cap containing 64 electrodes was modified to make it compatible for functional magnetic resonance imaging (fMRI). Metallic components were individually tested for magnetic susceptibility, and those that perturbed a free-swinging magnet or moved in a strong magnetic field were replaced with non-ferromagnetic components. Studies with a phantom indicate that placement of the cables carrying signals from the cap to the amplifiers can significantly affect MR image quality. Anatomical and functional images obtained with the modified electrode cap show modest signal loss, but not enough to substantially interfere with the low-noise images required for fMRI. The cap enables faster application of large arrays of electrodes in conjunction with MRI studies, and thus makes combined EEG/fMRI studies more practical, especially those with EEG source localization as one of the goals. PMID:10616125

  10. Plat_Forms -- a contest: The web development platform comparison

    CERN Document Server

    Prechelt, Lutz

    2008-01-01

    "Plat_Forms" is a competition in which top-class teams of three programmers compete to implement the same requirements for a web-based system within 30 hours, each team using a different technology platform (Java EE, .NET, PHP, Perl, Python, or Ruby on Rails). The results will provide new insights into the real (rather than purported) pros, cons, and emergent properties of each platform. The evaluation will analyze many aspects of each solution, both external (usability, functionality, reliability, performance, etc.) and internal (structure, understandability, flexibility, etc.).

  11. Density functional study of condensation in capped capillaries.

    Science.gov (United States)

    Yatsyshin, P; Savva, N; Kalliadasis, S

    2015-07-15

    We study liquid adsorption in narrow rectangular capped capillaries formed by capping two parallel planar walls (a slit pore) with a third wall orthogonal to the two planar walls. The most important transition in confined fluids is arguably condensation, where the pore becomes filled with the liquid phase which is metastable in the bulk. Depending on the temperature T, the condensation in capped capillaries can be first-order (at T≤Tcw) or continuous (at T>Tcw), where Tcw is the capillary wetting temperature. At T>Tcw, the capping wall can adsorb mesoscopic amounts of metastable under-condensed liquid. The onset of condensation is then manifested by the continuous unbinding of the interface between the liquid adsorbed on the capping wall and the gas filling the rest of the capillary volume. In wide capped capillaries there may be a remnant of wedge filling transition, which is manifested by the adsorption of liquid drops in the corners. Our classical statistical mechanical treatment predicts a possibility of three-phase coexistence between gas, corner drops and liquid slabs adsorbed on the capping wall. In sufficiently wide capillaries we find that thick prewetting films of finite length may be nucleated at the capping wall below the boundary of the prewetting transition. Prewetting then proceeds in a continuous manner manifested by the unbinding interface between the thick and thin films adsorbed on the side walls. Our analysis is based on a detailed numerical investigation of the density functional theory for the fluid equilibria for a number of illustrative case studies. PMID:26086161

  12. Rat as a model for direct pulp capping research

    OpenAIRE

    Orhan, Ekim Onur

    2013-01-01

    The aim of this review is to evaluate the suitability of rat teeth in preclinical evaluation of medical materials for direct pulp capping. The international standard states clearly that only non-rodent mammals are suitable species for animal research in dentistry. However, in the past halve of the century many research have been published using rat teeth in order to evaluate direct pulp capping, pulpotomies and tissue reactions after pulp exposure. Numerous studies showed that the healing of ...

  13. Indirect pulp capping in primary molar using glass ionomer cements

    OpenAIRE

    Murtia Metalita; Udijanto Tedjosasongko; Prawati Nuraini

    2014-01-01

    Background: Indirect pulp capping in primary teeth, however, is more rarely conducted than permanent teeth, since it thought to have low impact and most suggestion is for taking caries lesion aggressively on primary teeth. Purpose: The study was aimed to evaluate the subjective complaint, clinical symptom, and radiographic appearance of indirect pulp capping treatment using glass ionomers cements in primary molar. Methods: Sixteen children in range of age 6 to 8 years old, who visited Clinic ...

  14. A regional analysis of CAP expenditure in Austria

    OpenAIRE

    Strahl, Wibke; Dax, Thomas; Hovorka, Gerhard

    2011-01-01

    This paper reflects the demand for taking account of the territorial dimension in the application of Common Agricultural Policy (CAP) more comprehensively. While this has been addressed in rural development discourse to a wide extent over the last two decades and consensus for regionalized strategies is emerging, programme evaluation is in general still limited to the analysis of policy interventions at the national level. This implies that conclusions on the territorial effects of CAP are la...

  15. Combining international cap-and-trade with national carbon taxes

    OpenAIRE

    Heindl, Peter; Wood, Peter J.; Jotzo, Frank

    2014-01-01

    This paper examines the effects of combining an international cap-and-trade scheme with national carbon taxes. We consider a two-country stochastic partial equilibrium model with log-normally distributed uncertainty. The situation is analogous to the situation where European countries impose national carbon taxes in addition to the EU emissions trading. The allowance price in the joint cap-and-trade scheme depends on the tax rate, the relative size of countries and abatement options, the magn...

  16. Combining International Cap-and-Trade with National Carbon Taxes

    OpenAIRE

    Heindl, Peter; Wood, Peter J.; Jotzo, Frank

    2014-01-01

    This paper examines the effects of combining an international cap-and-trade scheme with national carbon taxes. We consider a two-country stochastic partial equilibrium model with log-normally distributed uncertainty. The situation is analogous to the situation where European countries impose national carbon taxes in addition to the EU emissions trading. The allowance price in the joint cap-and-trade scheme depends on the tax rate, the relative size of countries and abatement op...

  17. Viral Agents Causing Brown Cap Mushroom Disease of Agaricus bisporus

    OpenAIRE

    Eastwood, Daniel; Green, Julian; Grogan, Helen; Burton, Kerry

    2015-01-01

    The symptoms of viral infections of fungi range from cryptic to severe, but there is little knowledge of the factors involved in this transition of fungal/viral interactions. Brown cap mushroom disease of the cultivated Agaricus bisporus is economically important and represents a model system to describe this transition. Differentially expressed transcript fragments between mushrooms showing the symptoms of brown cap mushroom disease and control white noninfected mushrooms have been identifie...

  18. Mid-small Cap Vs. Heavy-weight Share

    Institute of Scientific and Technical Information of China (English)

    Liu Xinwen

    2008-01-01

    @@ In light of the current investment trends,mid and small cap stocks are the stocks of choice for institutional capital.Currently,101 listed companies have released their performance reports.Repots show that increased stocks from 55 companies are held by institutions,some heavy-weight blue-chip stocks were sold with large margins,while some mid and small cap stocks were widely welcomed by investors.

  19. Density functional study of condensation in capped capillaries

    Science.gov (United States)

    Yatsyshin, P.; Savva, N.; Kalliadasis, S.

    2015-07-01

    We study liquid adsorption in narrow rectangular capped capillaries formed by capping two parallel planar walls (a slit pore) with a third wall orthogonal to the two planar walls. The most important transition in confined fluids is arguably condensation, where the pore becomes filled with the liquid phase which is metastable in the bulk. Depending on the temperature T, the condensation in capped capillaries can be first-order (at T≤slant {{T}\\text{cw}} ) or continuous (at T\\gt {{T}\\text{cw}} ), where {{T}\\text{cw}} is the capillary wetting temperature. At T \\gt {{T}\\text{cw}} , the capping wall can adsorb mesoscopic amounts of metastable under-condensed liquid. The onset of condensation is then manifested by the continuous unbinding of the interface between the liquid adsorbed on the capping wall and the gas filling the rest of the capillary volume. In wide capped capillaries there may be a remnant of wedge filling transition, which is manifested by the adsorption of liquid drops in the corners. Our classical statistical mechanical treatment predicts a possibility of three-phase coexistence between gas, corner drops and liquid slabs adsorbed on the capping wall. In sufficiently wide capillaries we find that thick prewetting films of finite length may be nucleated at the capping wall below the boundary of the prewetting transition. Prewetting then proceeds in a continuous manner manifested by the unbinding interface between the thick and thin films adsorbed on the side walls. Our analysis is based on a detailed numerical investigation of the density functional theory for the fluid equilibria for a number of illustrative case studies.

  20. Novel Multipin Electrode Cap System for Dry Electroencephalography.

    Science.gov (United States)

    Fiedler, P; Pedrosa, P; Griebel, S; Fonseca, C; Vaz, F; Supriyanto, E; Zanow, F; Haueisen, J

    2015-09-01

    Current usage of electroencephalography (EEG) is limited to laboratory environments. Self-application of a multichannel wet EEG caps is practically impossible, since the application of state-of-the-art wet EEG sensors requires trained laboratory staff. We propose a novel EEG cap system with multipin dry electrodes overcoming this problem. We describe the design of a novel 24-pin dry electrode made from polyurethane and coated with Ag/AgCl. A textile cap system holds 97 of these dry electrodes. An EEG study with 20 volunteers compares the 97-channel dry EEG cap with a conventional 128-channel wet EEG cap for resting state EEG, alpha activity, eye blink artifacts and checkerboard pattern reversal visual evoked potentials. All volunteers report a good cap fit and good wearing comfort. Average impedances are below 150 kΩ for 92 out of 97 dry electrodes, enabling recording with standard EEG amplifiers. No significant differences are observed between wet and dry power spectral densities for all EEG bands. No significant differences are observed between the wet and dry global field power time courses of visual evoked potentials. The 2D interpolated topographic maps show significant differences of 3.52 and 0.44% of the map areas for the N75 and N145 VEP components, respectively. For the P100 component, no significant differences are observed. Dry multipin electrodes integrated in a textile EEG cap overcome the principle limitations of wet electrodes, allow rapid application of EEG multichannel caps by non-trained persons, and thus enable new fields of application for multichannel EEG acquisition. PMID:25998854