Experimental formulas and curves for estimating reactivity loss and radio-isotope yields on HWRR

International Nuclear Information System (INIS)

Liu Xi Zhi; Zhu HuanNan

1999-01-01

Based on the elemental conception of reactor physics and experiments on HWRR for years. A set of experimental formulas and curves has been got, which can be used to estimate reactivity loss and radio isotopes yield. (author)

Radio identifications of UGC galaxies - starbursts and monsters

International Nuclear Information System (INIS)

Condon, J.J.; Broderick, J.J.

1988-01-01

New and previously published observational data on galaxies with declination less than +82 deg from the Uppsala General Catalog (Nilson, 1973) are compiled in extensive tables and characterized in detail. Optical positions are confirmed by measurement of Palomar Sky Survey O prints, and radio identifications for 176 galaxies are made on the basis of 1.4-GHz Green Bank sky maps or 1.49-GHz observations obtained with the C configuration of the VLA in November-December 1986; contour maps based on the latter observations are provided. Radio-selected and IR-selected galaxy populations are found to be similar (and distinct from optically selected populations), and three radio/IR criteria are developed to distinguish galaxies powered by starbursts from those with supermassive black holes or other monster energy sources. 197 references

The MAPLE-X concept dedicated to the production of radio-isotopes

International Nuclear Information System (INIS)

Heeds, W.

1985-06-01

MAPLE is a versatile new Canadian multi-purpose research reactor concept that meets the nuclear aspirations of developing countries. It is planned to convert the NRX reactor at Chalk River Nuclear Laboratories into MAPLE-X as a demonstration prototype of this concept and thereafter to dedicate its operation to the production of radio-isotopes. A description of MAPLE-X and details of molybdenum-99 production are given

Medical isotope identification with large mobile detection systems

Science.gov (United States)

Mukhopadhyay, Sanjoy; Maurer, Richard

2012-10-01

The Remote Sensing laboratory (RSL) of National Security Technologies Inc. has built an array of large (5.08 - cm x 10.16 - cm x 40.6 - cm) thallium doped sodium iodide (NaI: Tl) scintillators to locate and screen gamma-ray emitting radioisotopes that are of interests to radiological emergency responders [1]. These vehicle mounted detectors provide the operators with rapid, simple, specific information for radiological threat assessment. Applications include large area inspection, customs inspection, border protection, emergency response, and monitoring of radiological facilities. These RSL mobile units are currently being upgraded to meet the Defense Threat Reduction Agency mission requirements for a next-generation system capable of detecting and identifying nuclear threat materials. One of the challenging problems faced by these gamma-ray detectors is the unambiguous identification of medical isotopes like 131I (364.49 keV [81.7%], 636.99 keV [7.17%]), 99Tcm (140.51 keV [89.1%]) and 67Ga (184.6 keV [19.7%], 300.2 [16.0%], 393.5 [4.5%] that are used in radionuclide therapy and often have overlapping gamma-ray energy regions of interest (ROI). The problem is made worse by short (about 5 seconds) acquisition time of the spectral data necessary for dynamic mobile detectors. This article describes attempts to identify medical isotopes from data collected from this mobile detection system in a short period of time (not exceeding 5 secs) and a large standoff distance (typically 10 meters) The mobile units offer identification capabilities that are based on hardware auto stabilization of the amplifier gain. The 1461 keV gamma-energy line from 40K is tracked. It uses gamma-ray energy windowing along with embedded mobile Gamma Detector Response and Analysis Software (GADRAS) [2] simultaneously to deconvolve any overlapping gamma-energy ROIs. These high sensitivity detectors are capable of resolving complex masking scenarios and exceed all ANSI N42.34 (2006) requirements

Methods, Systems and Apparatuses for Radio Frequency Identification

Science.gov (United States)

Fink, Patrick W. (Inventor); Chu, Andrew W. (Inventor); Lin, Gregory Y. (Inventor); Kennedy, Timothy F. (Inventor); Ngo, Phong H. (Inventor); Brown, Dewey T. (Inventor); Byerly, Diane (Inventor)

2017-01-01

A system for radio frequency identification (RFID) includes an enclosure defining an interior region interior to the enclosure, and a feed for generating an electromagnetic field in the interior region in response to a signal received from an RFID reader via a radio frequency (RF) transmission line and, in response to the electromagnetic field, receiving a signal from an RFID sensor attached to an item in the interior region. The structure of the enclosure may be conductive and may include a metamaterial portion, an electromagnetically absorbing portion, or a wall extending in the interior region. Related apparatuses and methods for performing RFID are provided.

Current status of radio-isotopes utilization

Energy Technology Data Exchange (ETDEWEB)

Singh, M [Banaras Hindu Univ. (India)

1974-08-01

Utilization of radioisotopes were reviewed briefly in a categorized manner. In plant biochemistry, long lived radioactive carbon ,/sup 14/C, was applied to clarify such metabolic processes as photosynthesis, respiration and protein synthesis, etc., while radioactive oxygen ,/sup 18/O, was used to study the O/sub 2/ generation mechanism. Radioactive phosphorus ,/sup 32/P, was used to detect the amount, grain size of phosphatic fertilizer as well as the time and depth for better utilization. Radioactive sulphur ,/sup 35/S, and nitrogen ,/sup 15/N, could be of use in studies of protein metabolism in plants. Radioactive tracers of other minerals such as N, P, K, Ca, Mg, Zn, Mo, B, and Co were also used to detect their specific role in plants. Use of radioactive isotopes in protein synthesis and transfer of genetic information was described. Radioactive iodine ,/sup 131/I, binding capacity of milk proteins, and radio trace studies in the iodine turn over in the use of radioactive iodine were summarized.

Radio frequency identification and its application in e-commerce

OpenAIRE

Bahr, Witold; Price, Brian J

2016-01-01

This chapter presents Radio Frequency Identification (RFID), which is one of the Automatic Identification and Data Capture (AIDC) technologies (Wamba and Boeck, 2008) and discusses the application of RFID in E-Commerce. Firstly RFID is defined and the tag and reader components of the RFID system are explained. Then historical context of RFID is briefly discussed. Next, RFID is contrasted with other AIDC technologies, especially the use of barcodes which are commonly applied in E-Commerce. Las...

Isotopically tailored lead target with reduced polonium and bismuth radio-waste

International Nuclear Information System (INIS)

Khorasanov, G.L.; Ivanov, A.P.; Lunev, V.P.; Blokhin, A.I.

2002-01-01

Residual activity of a lead target after 1 year irradiation with a high power, 0.8 GeV*30 mA, proton beam is studied. It is concluded that the main radiotoxicity of irradiated lead is connected with bismuth isotope, Bi-207, which is produced in natural lead, mix of several stable isotopes, via (p,2n) reaction with Pb-208 nuclei. It is proposed to use, as a target material, lead enriched with another stable isotope, Pb-206, in order to reduce producing Bi-207 and Po-210. Estimation of charges for obtaining large quantities of lead-206 is also given. Accumulation of hazardous radionuclides, Bi-207, Bi-208, and Po-210, in natural lead to be used as a coolant in future fast reactors and accelerator driven reactors is predicted. In accelerator driven systems a large portion of Bi-207 can be produced via Pb-208(p,2n)Bi-207 reaction in a target of natural lead (Pb-208/Pb-207/Pb-206/Pb-204=52.35/22.08/24.14/1.42 %). A new isotopically tailored coolant-converter for ADS consisting of lead isotope, Pb-206, is proposed. By using this material, it is possible to reduce essentially the production of the most radio-toxic isotopes of Bi and Po and to avoid disposing the large amounts of lead. To provide the future fast reactors and accelerator driven systems with low-activation coolant - converter, the new technology of obtaining the large amounts of natural lead enriched with lead isotope, Pb-206, should be developed. (authors)

Activities of AREVA Med. Extraction and purification of the 212Pb isotope from Thorium for radio-immunotherapy

International Nuclear Information System (INIS)

Miquel, Pierre

2012-01-01

After having recalled the definition of radio-immunotherapy (RIT) and the benefits of alpha RIT for the treatment of some cancers, this document explains the choice of the 212-Pb isotope instead of the 212-Bi isotope (the first one has a longer half-life than the second). The Pb isotope in fact progressively transforms itself into the Bi isotope. The production process is evoked with its important steps. A second part reports the first clinic tests performed in the Alabama Centre for the treatment of different cancer (breast, colon, ovarian, pancreas, stomach). Processes and doses are discussed

How can radio frequency identification technology impact nursing practice?

Science.gov (United States)

Billingsley, Luanne; Wyld, David

2014-12-01

Radio frequency identification (RFID) technology can save nurses time, improve quality of care, en hance patient and staff safety, and decrease costs. However, without a better understanding of these systems and their benefits to patients and hospitals, nurses may be slower to recommend, implement, or adopt RFID technology into practice.

RFID explained a primer on radio frequency identification technologies

CERN Document Server

Want, Roy

2006-01-01

This lecture provides an introduction to Radio Frequency Identification (RFID), a technology enabling automatic identification of objects at a distance without requiring line-of-sight. Electronic tagging can be divided into technologies that have a power source (active tags), and those that are powered by the tag interrogation signal (passive tags); the focus here is on passive tags. An overview of the principles of the technology divides passive tags into devices that use either near field or far field coupling to communicate with a tag reader. The strengths and weaknesses of the approaches a

Radio Frequency Identification (RFID): its usage and libraries

OpenAIRE

Rafiq, Muhammad

2004-01-01

Radio Frequency Identification (RFID) is one of the most exciting technologies that revolutionize the working practices by increasing efficiencies, and improving profitability. The article provides details about RFID, its components, how it works, and its usage in different sectors i.e. retail sales and supply chains, livestock industry, courier services, military and prisons, automobiles and logistics, entertainment industry, publishing industry, wireless transaction, and, especially, in...

Authentication of Radio Frequency Identification Devices Using Electronic Characteristics

Science.gov (United States)

Chinnappa Gounder Periaswamy, Senthilkumar

2010-01-01

Radio frequency identification (RFID) tags are low-cost devices that are used to uniquely identify the objects to which they are attached. Due to the low cost and size that is driving the technology, a tag has limited computational capabilities and resources. This limitation makes the implementation of conventional security protocols to prevent…

Discrimination of uranium chemo-toxic and radio-toxic effects: definition of biological markers for evaluating professional risks in nuclear industry

International Nuclear Information System (INIS)

Darolles, Carine

2010-01-01

Uranium (U) is a heavy metal that is also considered as an alpha emitter. Thus the origin of U toxicity is both chemical and radiological. The identification of bio-markers to discriminate chemical and radiological toxicity for a given U compound is required to assess accurately the health effects of isotopic mixtures such as depleted U in 235 U with a low specific activity. Data from the literature show that the best candidates are cytogenetic markers. In the present work, the assessment of bio-markers of U contamination was performed on three cellular models (mouse fibroblasts, rat lymphocytes and human lymphocytes) that were exposed to different isotopic mixtures of U. The cytokinesis-block micronucleus (MN) centromere assay was performed to discriminate the chemo-toxic and radio-toxic effects of U. This study showed that the evaluation of micronuclei in bi-nucleated cells could not assess U genotoxicity accurately. Instead, the assessment of centromere-negative micronuclei and nucleo-plasmic bridges correlated with the radio-toxic effects of U. The evaluation of centromere-positive micronuclei and micronuclei in mono-nucleated cells correlated with the chemo-toxic effects of U. These cytogenetic markers should be validated on different biological models and could be proposed to discriminate radiological and chemical toxicity of a given isotopic mixture of U. These four cytogenetic markers could be a useful complement of the classical dosimetric bio-markers for the assessment of internal uranium contamination. (author)

Glue-sniffing as a cause of a positive radio-isotope brain scan

Energy Technology Data Exchange (ETDEWEB)

Lamont, C M; Adams, F G

1982-08-01

Convulsions are a known complication of the acute intoxicant effects of solvent abuse. A radio-isotope brain scan done 9 months following status epilepticus secondary to toluene inhalation, in a previously normal school-boy, demonstrated several wedge-shaped areas of increased uptake, in both cerebral hemispheres, consistent with infarcts. It is worth remembering that a positive brain scan in a young person, with recent onset of epilepsy, may be due to glue-sniffing.

Glue-sniffing as a cause of a positive radio-isotope brain scan

International Nuclear Information System (INIS)

Lamont, C.M.; Adams, F.G.

1982-01-01

Convulsions are a known complication of the acute intoxicant effects of solvent abuse. A radio-isotope brain scan done 9 months following status epilepticus secondary to toluene inhalation, in a previously normal school-boy, demonstrated several wedge-shaped areas if increased uptake, in both cerebral hemispheres, consistent with infarcts. It is worth remembering that a positive brain scan in a young person, with recent onset of epilepsy, may be due to glue-sniffing. (orig.)

A simulation tool for radio frequency identification construction supply chains

NARCIS (Netherlands)

Gassel, van F.J.M.; Jansen, G.; Zavadskas, E.K.; Kaklauskas, A.; Skibniewski, M.J.

2008-01-01

Radio Frequency IDentification (RFID) technology is being used more and more in the construction industry. RFID tags and peripheral equipment are becoming cheaper and more suitable for application in the supply chain. However, it is difficult for contractors to estimate the costs and benefits of

Recent research activities and future subjects on stable- and radio-isotopes of chlorine in environment

International Nuclear Information System (INIS)

Kushita, Kouhei

2001-12-01

This report reviews the recent studies on the stable- and radio-isotopes of chlorine from a viewpoint of environmental science, partly including historic references on this element. First, general properties, occurrence, and utilization of chlorine are described. Secondly, current status and research works on chlorine-compounds, which attract special attention in recent years as environmentally hazardous materials, are reported. Thirdly, research works on stable chlorine isotopes, 35 Cl and 37 Cl, are described with a focus laid on the newly-developed techniques; isotopic ratio mass spectrometry (IRMS) and thermal ionization mass spectrometry (TIMS). Fourthly, recent research works on chlorine radioisotopes, 36 Cl etc., are described, focusing on the development of accelerator mass spectrometry (AMS) and its application to geochemistry and others. Finally, taking account of the above-mentioned recent works on Cl isotopes, possible future research subjects are discussed. (author)

Recent research activities and future subjects on stable- and radio-isotopes of chlorine in environment

Energy Technology Data Exchange (ETDEWEB)

Kushita, Kouhei [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-12-01

This report reviews the recent studies on the stable- and radio-isotopes of chlorine from a viewpoint of environmental science, partly including historic references on this element. First, general properties, occurrence, and utilization of chlorine are described. Secondly, current status and research works on chlorine-compounds, which attract special attention in recent years as environmentally hazardous materials, are reported. Thirdly, research works on stable chlorine isotopes, {sup 35}Cl and {sup 37}Cl, are described with a focus laid on the newly-developed techniques; isotopic ratio mass spectrometry (IRMS) and thermal ionization mass spectrometry (TIMS). Fourthly, recent research works on chlorine radioisotopes, {sup 36}Cl etc., are described, focusing on the development of accelerator mass spectrometry (AMS) and its application to geochemistry and others. Finally, taking account of the above-mentioned recent works on Cl isotopes, possible future research subjects are discussed. (author)

Radio Frequency Identification (RFID) technology and patient safety

OpenAIRE

Ajami, Sima; Rajabzadeh, Ahmad

2013-01-01

Background: Radio frequency identification (RFID) systems have been successfully applied in areas of manufacturing, supply chain, agriculture, transportation, healthcare, and services to name a few. However, the different advantages and disadvantages expressed in various studies of the challenges facing the technology of the use of the RFID technology have been met with skepticism by managers of healthcare organizations. The aim of this study was to express and display the role of RFID techno...

Re-Os isotope systematics of the Radio Hill Ni-Cu-PGE complex, West Pilbara Craton, Western Australia

International Nuclear Information System (INIS)

Frick, L.R.; McBride, J.S.

1999-01-01

Full text: The Radio Hill Complex is one of several layered mafic-ultramafic intrusions that were emplaced into the west Pilbara Craton at ca. 2.9 Ga. It is believed to be genetically related to other similar intrusions in the area which include the Munni Munni, Andover, Dingo and Maitland Complexes (Hoatson et al. 1999). The Radio Hill Complex is the only one of these intrusions to contain economic quantities of Ni and Cu at the present time. This relatively small intrusion (∼1200 m stratigraphic thickness) is divided into two zones, an upper gabbroic zone and a lower ultramafic zone, the base of which possesses massive magmatic sulfide mineralisation (pyrrhotite, pentlandite, chalcopyrite, magnetite). Re-Os isotopic data have been obtained for a suite of samples from underground, outcrop (gabbroic zone samples) and drill core. Os concentrations in the mineralised zone are very high, ranging from 19 to 191 ppb Os, with low Re/Os ratios ( 10,000), where R-factor is defined as the mass ratio of silicate magma to sulfide magma that it has equilibrated with. However, modelling of the Radio Hill ore system using Re, Os and PGE (Hoatson et al. 1992) concentrations suggest that the R-factor in the Radio Hill ore was low (100-900). Therefore, the initial Os isotopic composition of the ore should be radiogenic (high gOs >+500) if local crustal contamination triggered sulfide saturation. The slightly radiogenic initial Os isotopic composition suggests that the bulk parental magma was a crustally-contaminated magma. R-factor modelling further suggests that the parental magma to this intrusion was neither a basalt nor a pure komatiite, but more likely a contaminated komatiite (with a relatively high Os concentration). This agrees with the previous findings of Hoatson et al. (1992) who proposed a parental magma of siliceous high-magnesium basalt (SHMB) composition. Our Re-Os isotope modelling agrees with the trace elements, Nd and Sr isotope modelling of Hoatson et al. (1992

Radio-isotope uptake by tumours. Introduction to their clinical use

International Nuclear Information System (INIS)

Blanchon, P.

1975-01-01

Before each group of authors exposes his results, present tendencies and progress in research may be briefly recalled. The object is to make to clinicians, a technique which is both reliable and relatively easy to perform. The improvements are due to ease of recording with the gamma-camera, and, apart from Hg 197, the introduction of new radio-isotopes: Ga 67, bleomycin labelled with Co 57 and Cu 67 without a carrier. Tumours which escape detection have thus become rare and the specificity of the methods is reinforced. But the difficulties due to possible fixation on advanced inflammatory lesions have not yet been totally overcome [fr

Rule Based Reasoning Untuk Monitoring Distribusi Bahan Bakar Minyak Secara Online dan Realtime menggunakan Radio Frequency Identification

Directory of Open Access Journals (Sweden)

Mokhamad Iklil Mustofa

2017-05-01

Full Text Available The scarcity of fuel oil in Indonesia often occurs due to delays in delivery caused by natural factors or transportation constraints. Theaim of this  research is to develop systems of fuel distribution monitoring online and realtime using rule base reasoning method and radio frequency identification technology. The rule-based reasoning method is used as a rule-based reasoning model used for monitoring distribution and determine rule-based safety stock. The monitoring system program is run with a web-based computer application. Radio frequency identification technology is used by utilizing radio waves as an media identification. This technology is used as a system of tracking and gathering information from objects automatically. The research data uses data of delayed distribution of fuel from fuel terminal to consumer. The monitoring technique uses the time of departure, the estimated time to arrive, the route / route passed by a fuel tanker attached to the radio frequency Identification tag. This monitoring system is carried out by the radio frequency identification reader connected online at any gas station or specified position that has been designed with study case in Semarang. The results of the research covering  the status of rule based reasoning that sends status, that is timely and appropriate paths, timely and truncated pathways, late and on track, late and cut off, and tank lost. The monitoring system is also used in determining the safety stock warehouse, with the safety stock value determined based on the condition of the stock warehouse rules.

Applications of radio frequency identification systems in the mining industry

Energy Technology Data Exchange (ETDEWEB)

Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

1994-01-01

Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. The paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. The problems involved in designing and certifying a system for use in hazardous areas are described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described, covering applications both on the surface and underground. 1 ref., 10 figs.

Reducing Disparity in Radio-Isotopic and Astrochronology-Based Time Scales of the Late Eocene and Oligocene

NARCIS (Netherlands)

Sahy, Diana; Condon, Daniel J.; Hilgen, Frederik J.|info:eu-repo/dai/nl/102639876; Kuiper, Klaudia F.|info:eu-repo/dai/nl/258125772

2017-01-01

A significant discrepancy of up to 0.6 Myr exists between radio-isotopically calibrated and astronomically tuned time scales of the late Eocene-Oligocene. We explore the possible causes of this discrepancy through the acquisition of “high-precision” 206Pb/238U dating of zircons from 11 volcanic ash

AUTOMATIC RECOGNITION OF CORONAL TYPE II RADIO BURSTS: THE AUTOMATED RADIO BURST IDENTIFICATION SYSTEM METHOD AND FIRST OBSERVATIONS

International Nuclear Information System (INIS)

Lobzin, Vasili V.; Cairns, Iver H.; Robinson, Peter A.; Steward, Graham; Patterson, Garth

2010-01-01

Major space weather events such as solar flares and coronal mass ejections are usually accompanied by solar radio bursts, which can potentially be used for real-time space weather forecasts. Type II radio bursts are produced near the local plasma frequency and its harmonic by fast electrons accelerated by a shock wave moving through the corona and solar wind with a typical speed of ∼1000 km s -1 . The coronal bursts have dynamic spectra with frequency gradually falling with time and durations of several minutes. This Letter presents a new method developed to detect type II coronal radio bursts automatically and describes its implementation in an extended Automated Radio Burst Identification System (ARBIS 2). Preliminary tests of the method with spectra obtained in 2002 show that the performance of the current implementation is quite high, ∼80%, while the probability of false positives is reasonably low, with one false positive per 100-200 hr for high solar activity and less than one false event per 10000 hr for low solar activity periods. The first automatically detected coronal type II radio burst is also presented.

Radio frequency identification applications in hospital environments.

Science.gov (United States)

Wicks, Angela M; Visich, John K; Li, Suhong

2006-01-01

Radio frequency identification (RFID) technology has recently begun to receive increased interest from practitioners and academicians. This interest is driven by mandates from major retailers such as Wal-Mart, Target and Metro Group, and the United States Department of Defense, in order to increase the efficiency and visibility of material and information flows in the supply chain. However, supply chain managers do not have a monopoly on the deployment of RFID. In this article, the authors discuss the potential benefits, the areas of applications, the implementation challenges, and the corresponding strategies of RFID in hospital environments.

Passive ultra high frequency radio frequency identification systems for single-item identification in food supply chains

Directory of Open Access Journals (Sweden)

Paolo Barge

2017-02-01

Full Text Available In the food industry, composition, size, and shape of items are much less regular than in other commodities sectors. In addition, a wide variety of packaging, composed by different materials, is employed. As material, size and shape of items to which the tag should be attached strongly influence the minimum power requested for tag functioning, performance improvements can be achieved only selecting suitable radio frequency (RF identifiers for the specific combination of food product and packaging. When dealing with logistics units, the dynamic reading of a vast number of tags could originate simultaneous broadcasting of signals (tag-to-tag collisions that could affect reading rates and the overall reliability of the identification procedure. This paper reports the results of an analysis of the reading performance of ultra high frequency radio frequency identification systems for multiple static and dynamic electronic identification of food packed products in controlled conditions. Products were considered when arranged on a logistics pallet. The effects on reading rate of different factors, among which the product type, the gate configuration, the field polarisation, the power output of the RF reader, the interrogation protocol configuration as well as the transit speed, the number of tags and their interactions were statistically analysed and compared.

Implanting inequality: empirical evidence of social and ethical risks of implantable radio-frequency identification (RFID) devices.

Science.gov (United States)

Monahan, Torin; Fisher, Jill A

2010-10-01

The aim of this study was to assess empirically the social and ethical risks associated with implantable radio-frequency identification (RFID) devices. Qualitative research included observational studies in twenty-three U.S. hospitals that have implemented new patient identification systems and eighty semi-structured interviews about the social and ethical implications of new patient identification systems, including RFID implants. The study identified three primary social and ethical risks associated with RFID implants: (i) unfair prioritization of patients based on their participation in the system, (ii) diminished trust of patients by care providers, and (iii) endangerment of patients who misunderstand the capabilities of the systems. RFID implants may aggravate inequalities in access to care without any clear health benefits. This research underscores the importance of critically evaluating new healthcare technologies from the perspective of both normative ethics and empirical ethics.

Simple radio-isotopic method for the detection of bronchial inhalation during intensive care

Energy Technology Data Exchange (ETDEWEB)

Venot, J.; Veyriras, E.; Vandroux, J.C.; Bournaud, E.; Gastinne, H.; Beck, C.

1984-08-01

The high incidence of pneumopathy in intensive care units might be due to the pulmonary aspiration of gastric juice following gastro-oesophageal reflux. The paper describes a radio-isotopic method using material easy to install at the patient's bedside. This technique demonstrated aspiration of gastric juice in the lungs of 8 of 25 intensive care patients investigated. Such a method might be useful later to demonstrate that silent bronchial aspirations of gastric juice are responsible for pulmonary complications.

Applications of radio frequency identification systems in the mining industry

Energy Technology Data Exchange (ETDEWEB)

Hind, D [Davis Derby Limited (United Kingdom)

1994-12-31

The paper describes the application of Radio Frequency Identification (RFID) systems in the mining industry for both surface and underground mines. The history of the RFID system, types available, the transponder, and the various techniques used are described and compared. The design and certification of a system for use in a hazardous area are described, noting the hazard of inadvertent detonator ignition. 2 refs.

Applications of radio frequency identification systems in the mining industry

Energy Technology Data Exchange (ETDEWEB)

Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

1995-07-01

Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. This paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. A review of the history of RFID systems in the mining industry is also given in the paper. The problems involved in designing and certifying a system for use in hazardous areas are also described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described in considerable detail, covering applications both on the surface and underground. 1 ref., 12 figs., 1 tab.

Radio Frequency Identification (RFID) in healthcare: a literature review.

Science.gov (United States)

Kolokathi, Aikaterini; Rallis, Panagiotis

2013-01-01

Creating and maintaining a safe and high-quality health care environment is of great importance for global community. New technologies and their applications can help us achieve this goal. Radio-Frequency Identification (RIFD) technology is considered one of those technologies and even today there are some interesting deployments in the health industry. As a result, this work aims to present the basic idea behind RFID solutions, problems that can be addressed with the adoption of RFID and the benefits of relative applications.

Assessment of Stable Isotope Distribution in Complex Systems

Science.gov (United States)

He, Y.; Cao, X.; Wang, J.; Bao, H.

2017-12-01

Biomolecules in living organisms have the potential to approach chemical steady state and even apparent isotope equilibrium because enzymatic reactions are intrinsically reversible. If an apparent local equilibrium can be identified, enzymatic reversibility and its controlling factors may be quantified, which helps to understand complex biochemical processes. Earlier research on isotope fractionation tends to focus on specific process and compare mostly two different chemical species. Using linear regression, "Thermodynamic order", which refers to correlated δ13C and 13β values, has been proposed to be present among many biomolecules by Galimov et al. However, the concept "thermodynamic order" they proposed and the approach they used has been questioned. Here, we propose that the deviation of a complex system from its equilibrium state can be rigorously described as a graph problem as is applied in discrete mathematics. The deviation of isotope distribution from equilibrium state and apparent local isotope equilibrium among a subset of biomolecules can be assessed using an apparent fractionation difference matrix (|Δα|). Applying the |Δα| matrix analysis to earlier published data of amino acids, we show the existence of apparent local equilibrium among different amino acids in potato and a kind of green alga. The existence of apparent local equilibrium is in turn consistent with the notion that enzymatic reactions can be reversible even in living systems. The result also implies that previous emphasis on external carbon source intake may be misplaced when studying isotope distribution in physiology. In addition to the identification of local equilibrium among biomolecules, the difference matrix approach has the potential to explore chemical or isotope equilibrium state in extraterrestrial bodies, to distinguish living from non-living systems, and to classify living species. This approach will benefit from large numbers of systematic data and advanced pattern

Applications of radio frequency identification systems in underground mining

Energy Technology Data Exchange (ETDEWEB)

Knights, P F; Kairouz, J; Daneshmend, L K; Pathak, J [McGill University, Montreal, PQ (Canada). Canadian Centre for Automation and Robotics in Mining

1994-12-31

The paper describes the application of Radio Frequency Identification (RFID) systems in underground hardrock mines. The operating principles and some of the applications of RDIF systems are described. The system operates by the exchange of information between transponder tags and an antenna and controller device. The suitability of RFID systems for process control, inventory control, materials handling, control of access, security, and transportation in underground coal and hardrock mines is discussed. An ore tonnage tracking system is under development that uses RDIF transponder tags to locate vehicles in an underground mine. 6 refs., 4 figs.

Dual isotope notch observer for isotope identification, assay and imaging with mono-energetic gamma-ray sources

Science.gov (United States)

Barty, Christopher P.J.

2013-02-05

A dual isotope notch observer for isotope identification, assay and imaging with mono-energetic gamma-ray sources includes a detector arrangement consists of three detectors downstream from the object under observation. The latter detector, which operates as a beam monitor, is an integrating detector that monitors the total beam power arriving at its surface. The first detector and the middle detector each include an integrating detector surrounding a foil. The foils of these two detectors are made of the same atomic material, but each foil is a different isotope, e.g., the first foil may comprise U235 and second foil may comprise U238. The integrating detectors surrounding these pieces of foil measure the total power scattered from the foil and can be similar in composition to the final beam monitor. Non-resonant photons will, after calibration, scatter equally from both foils.

Assessing the Performance of In-Stream Restoration Projects Using Radio Frequency Identification (RFID Transponders

Directory of Open Access Journals (Sweden)

Bruce MacVicar

2015-10-01

Full Text Available Instream channel restoration is a common practice in river engineering that presents a challenge for research. One research gap is the development of monitoring techniques that allow for testable predictions of sediment transport and supply. Here we use Radio Frequency Identification (RFID transponders to compare the short-term (1-year sediment transport response to flood events in a restored and a control reach. The field site is Wilket Creek, an enlarged creek in a fully urbanized catchment without stormwater management control in Toronto, Ontario. The responses to three flooding periods, each of which are at or above the design bankfull discharge, are described. Key results are that (i particle mobility is lower in the restored reach for all three periods; (ii full mobility occurs in the control reach during the first two floods while partial mobility occurs in the restored reach; and (iii the constructed morphology exerted a controlling influence on particle entrainment, with higher mobility in the pools. Log-transformed travel distances exhibit normal distributions when grouped by particle size class, which allows a statistical comparison with power law and other predictive travel-distance relations. Results show that three bedload transport conditions can occur, with partial mobility associated with a mild relation between particle size and travel distance and full mobility associated with either a flat or steep relation depending on the degree of integration of particles in the bed. Recommendations on seeding strategy and sample sizes are made to improve the precision of the results by minimizing confidence intervals for mobility and travel distances. Even in a short term study, the RFID sediment tracking technique allows a process-based assessment of stream restoration outcomes that can be used to justify the instream intervention and plan future attempts to stabilize and enhance the system.

Demonstration of the Robotic Gamma Locating and Isotopic Identification Device

International Nuclear Information System (INIS)

Anderson, M.O.; Conner, C.C.; Daniel, V.E.; McKay, M.D.; Yancey, N.A.

2002-01-01

The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in decontaminating and decommissioning nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area of DOE's Office of Science and Technology sponsors Large-Scale Demonstration and Deployment Projects (LSDDP) to test new technologies. As part of these projects, developers and vendors showcase new products designed to decrease health and safety risks to personnel and the environment, increase productivity, and lower costs. As part of the FY 2000 and 2001 LSDDP, the Idaho National Engineering and Environmental Laboratory (INEEL) collaborated with the Russian Research and Development Institute of Construction Technology (NIKIMT). This collaboration resulted in the development of the Robotic Gamma Locating and Isotopic Identification Device (RGL and IID) which integrated DOE Robotics Crosscutting (Rbx) technology with NIKIMT Russian gamma locating and isotopic identification technology. This paper will discuss the technologies involved in this integration and results from the demonstration including reduction of personnel exposure, increase in productivity, and reduced risk

Research on isotope geology. Assessment of heat production potential of granitic rocks and development of geothermal exploration techniques using radioactive/stable isotopes and fission track 2

Energy Technology Data Exchange (ETDEWEB)

Shin, Seong Cheon; Chi, Se Jung [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

1995-12-01

Radioelements and heat production rates of granitic rocks and stable isotopes of groundwaters were analyzed to investigate the geothermal potential of Wolchulsan granite complex in the southern Yeongam area. Wolchulsan granite complex is composed mainly by Cretaceous pink alkali-feldspar granite and partly Jurassic biotite granite. The main target for the geothermal exploration is the alkali-feldspar granite that is known in general to be favorable geothermal reservoir(e.g., Shap granite in UK). To develop exploration techniques for geothermal anomalies, all geochemical data were compared to those from the Jeonju granite complex. Heat production rates(HPR) of the alkali-feldspar granite is 1.8 - 10.6 {mu}Wm{sup -3}. High radio-thermal anomalies were revealed from the central western and northern parts of the granite body. These are relatively higher than the Caledonian hot dry granites in the UK. The integrated assessment of Wolchulsan granite complex suggests potential of the Cretaceous alkali-feldspar granite as a geothermal targets. Groundwater geochemistry of the Yeongam area reflects simple evaporation process and higher oxidation environment. Stable isotope data of groundwaters are plotted on or close to the Meteoric Water Line(MWL). These isotopic data indicate a significant meteoric water dominance and do not show oxygen isotope fractionation between groundwater and wall rocks. In despite of high HPR values of the Yeongam alkali-feldspar granite, groundwater samples do not show the same geochemical properties as a thermal water in the Jeonju area. This reason can be well explained by the comparison with geological settings of the Jeonju area. The Yeongam alkali-feldspar granite does not possess any adjacent heat source rocks despite its high radio-thermal HPR. While the Jeonju granite batholith has later heat source intrusive and suitable deep fracture system for water circulation with sedimentary cap rocks. (Abstract Truncated)

On-Site Inspection RadioIsotopic Spectroscopy (Osiris) System Development

Energy Technology Data Exchange (ETDEWEB)

Caffrey, Gus J. [Idaho National Laboratory, Idaho Falls, ID (United States); Egger, Ann E. [Idaho National Laboratory, Idaho Falls, ID (United States); Krebs, Kenneth M. [Idaho National Laboratory, Idaho Falls, ID (United States); Milbrath, B. D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jordan, D. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Warren, G. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilmer, N. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-09-01

We have designed and tested hardware and software for the acquisition and analysis of high-resolution gamma-ray spectra during on-site inspections under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The On-Site Inspection RadioIsotopic Spectroscopy—Osiris—software filters the spectral data to display only radioisotopic information relevant to CTBT on-site inspections, e.g.,132I. A set of over 100 fission-product spectra was employed for Osiris testing. These spectra were measured, where possible, or generated by modeling. The synthetic test spectral compositions include non-nuclear-explosion scenarios, e.g., a severe nuclear reactor accident, and nuclear-explosion scenarios such as a vented underground nuclear test. Comparing its computer-based analyses to expert visual analyses of the test spectra, Osiris correctly identifies CTBT-relevant fission product isotopes at the 95% level or better.The Osiris gamma-ray spectrometer is a mechanically-cooled, battery-powered ORTEC Transpec-100, chosen to avoid the need for liquid nitrogen during on-site inspections. The spectrometer was used successfully during the recent 2014 CTBT Integrated Field Exercise in Jordan. The spectrometer is controlled and the spectral data analyzed by a Panasonic Toughbook notebook computer. To date, software development has been the main focus of the Osiris project. In FY2016-17, we plan to modify the Osiris hardware, integrate the Osiris software and hardware, and conduct rigorous field tests to ensure that the Osiris system will function correctly during CTBT on-site inspections. The planned development will raise Osiris to technology readiness level TRL-8; transfer the Osiris technology to a commercial manufacturer, and demonstrate Osiris to potential CTBT on-site inspectors.

On-Site Inspection RadioIsotopic Spectroscopy (Osiris) System Development

International Nuclear Information System (INIS)

Caffrey, Gus J.; Egger, Ann E.; Krebs, Kenneth M.; Milbrath, B. D.; Jordan, D. V.; Warren, G. A.; Wilmer, N. G.

2015-01-01

We have designed and tested hardware and software for the acquisition and analysis of high-resolution gamma-ray spectra during on-site inspections under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The On-Site Inspection RadioIsotopic Spectroscopy-Osiris-software filters the spectral data to display only radioisotopic information relevant to CTBT on-site inspections, e.g.,132I. A set of over 100 fission-product spectra was employed for Osiris testing. These spectra were measured, where possible, or generated by modeling. The synthetic test spectral compositions include non-nuclear-explosion scenarios, e.g., a severe nuclear reactor accident, and nuclear-explosion scenarios such as a vented underground nuclear test. Comparing its computer-based analyses to expert visual analyses of the test spectra, Osiris correctly identifies CTBT-relevant fission product isotopes at the 95% level or better.The Osiris gamma-ray spectrometer is a mechanically-cooled, battery-powered ORTEC Transpec-100, chosen to avoid the need for liquid nitrogen during on-site inspections. The spectrometer was used successfully during the recent 2014 CTBT Integrated Field Exercise in Jordan. The spectrometer is controlled and the spectral data analyzed by a Panasonic Toughbook notebook computer. To date, software development has been the main focus of the Osiris project. In FY2016-17, we plan to modify the Osiris hardware, integrate the Osiris software and hardware, and conduct rigorous field tests to ensure that the Osiris system will function correctly during CTBT on-site inspections. The planned development will raise Osiris to technology readiness level TRL-8; transfer the Osiris technology to a commercial manufacturer, and demonstrate Osiris to potential CTBT on-site inspectors.

Final Progress Report: Isotope Identification Algorithm for Rapid and Accurate Determination of Radioisotopes Feasibility Study

International Nuclear Information System (INIS)

Rawool-Sullivan, Mohini; Bounds, John Alan; Brumby, Steven P.; Prasad, Lakshman; Sullivan, John P.

2012-01-01

This is the final report of the project titled, 'Isotope Identification Algorithm for Rapid and Accurate Determination of Radioisotopes,' PMIS project number LA10-HUMANID-PD03. The goal of the work was to demonstrate principles of emulating a human analysis approach towards the data collected using radiation isotope identification devices (RIIDs). It summarizes work performed over the FY10 time period. The goal of the work was to demonstrate principles of emulating a human analysis approach towards the data collected using radiation isotope identification devices (RIIDs). Human analysts begin analyzing a spectrum based on features in the spectrum - lines and shapes that are present in a given spectrum. The proposed work was to carry out a feasibility study that will pick out all gamma ray peaks and other features such as Compton edges, bremsstrahlung, presence/absence of shielding and presence of neutrons and escape peaks. Ultimately success of this feasibility study will allow us to collectively explain identified features and form a realistic scenario that produced a given spectrum in the future. We wanted to develop and demonstrate machine learning algorithms that will qualitatively enhance the automated identification capabilities of portable radiological sensors that are currently being used in the field.

Medical equipment management through the use of radio frequency identification (RFID)

OpenAIRE

Sanchez, Joaquin A.; Nixon, Richard A.; Chávez, Sergio

2004-01-01

MBA Professional Report Approved for public release, distribution is unlimited The purpose of this MBA project is to identify the potential value of Radio Frequency Identification (RFID) use in the management of medical equipment at Naval Medical Center San Diego (NMCSD). In doing so, our project seeks to derive potential benefits through the use of RFID technology by comparing a group of medical equipment items that are tracked within NMCSD. The project includes a discussion of additio...

Electromagnetic interference from radio frequency identification inducing potentially hazardous incidents in critical care medical equipment

NARCIS (Netherlands)

Togt, R. van der; Lieshout, E.J. van; Hensbroek, R.; Beinat, E.; Binnekade, J.M.; Bakker, P.J.M.

2008-01-01

Context: Health care applications of autoidentification technologies, such as radio frequency identification (RFID), have been proposed to improve patient safety and also the tracking and tracing of medical equipment. However, electromagnetic interference (EMI) by RFID on medical devices has never

Electron linac for medical isotope production with improved energy efficiency and isotope recovery

Science.gov (United States)

Noonan, John; Walters, Dean; Virgo, Matt; Lewellen, John

2015-09-08

A method and isotope linac system are provided for producing radio-isotopes and for recovering isotopes. The isotope linac is an energy recovery linac (ERL) with an electron beam being transmitted through an isotope-producing target. The electron beam energy is recollected and re-injected into an accelerating structure. The ERL provides improved efficiency with reduced power requirements and provides improved thermal management of an isotope target and an electron-to-x-ray converter.

Adoption of radio-frequency identification to establish traceability in Taiwanese eel exported to the Japanese market.

Science.gov (United States)

Jeng, Shu-Ching; Wu, Chun-Lung; Yang, I-Da

2013-01-01

Eel culture and export to the Japanese market is an important industry in Taiwan; however, the average amount produced by each farm is small. Eels from different farms might be mixed before export, making it difficult to determine which farm is responsible for eels containing drug residues. Therefore, the Taiwanese government uses a two-stage procedure of inspection and accreditation for validating the use of good practice in aquaculture farming. Nevertheless, it is still difficult to trace any farm that has produced eels containing drug residues. Radio-frequency identification has the potential to establish traceability in eel products. Here we suggest that Japanese eel importers should insist on the use of radio-frequency identification by Taiwanese eel exporters to enable verification of the safety of eel products being exported to the Japanese market.

A Combined Radio- and Stable-Isotopic Study of a California Coastal Aquifer System

Directory of Open Access Journals (Sweden)

Michael Land

2013-04-01

Full Text Available Stable and radioactive tracers were utilized in concert to characterize geochemical processes in a complex coastal groundwater system and to provide constraints on the kinetics of rock/water interactions. Groundwater samples from wells within the Dominguez Gap region of Los Angeles County, California were analyzed for a suite of major cations (Na+, K+, Mg2+, Ca2+ and anions (Cl−, SO42−, silica, alkalinity, select trace elements (Ba, B, Sr, dissolved oxygen, stable isotopes of hydrogen (δD, oxygen (δ18O, dissolved inorganic carbon (δ13CDIC, and radioactive isotopes (3H, 222Rn and 223,224,226,228Ra. In the study area, groundwater may consist of a complex mixture of native groundwater, intruded seawater, non-native injected water, and oil-field brine water. In some wells, Cl− concentrations attained seawater-like values and in conjunction with isotopically heavier δ18O values, these tracers provide information on the extent of seawater intrusion and/or mixing with oil-field brines. Groundwater 3H above 1 tritium unit (TU was observed only in a few select wells close to the Dominguez Gap area and most other well groundwater was aged pre-1952. Based on an initial 14C value for the study site of 90 percent modern carbon (pmc, groundwater age estimates likely extend beyond 20 kyr before present and confirm deep circulation of some native groundwater through multiple aquifers. Enriched values of groundwater δ13CDIC in the absence of SO42− imply enhanced anaerobic microbial methanogenesis. While secular equilibrium was observed for 234U/238U (activity ratios ~1 in host matrices, strong isotopic fractionation in these groundwater samples can be used to obtain information of adsorption/desorption kinetics. Calculated Ra residence times are short, and the associated desorption rate constant is about three orders of magnitude slower than that of the adsorption rate constant. Combined stable- and radio-isotopic results provide unique insights

The development of small-scale mechanization means positioning algorithm using radio frequency identification technology in industrial plants

Science.gov (United States)

Astafiev, A.; Orlov, A.; Privezencev, D.

2018-01-01

The article is devoted to the development of technology and software for the construction of positioning and control systems for small mechanization in industrial plants based on radio frequency identification methods, which will be the basis for creating highly efficient intelligent systems for controlling the product movement in industrial enterprises. The main standards that are applied in the field of product movement control automation and radio frequency identification are considered. The article reviews modern publications and automation systems for the control of product movement developed by domestic and foreign manufacturers. It describes the developed algorithm for positioning of small-scale mechanization means in an industrial enterprise. Experimental studies in laboratory and production conditions have been conducted and described in the article.

Construction Project Performance Improvement through Radio Frequency Identification Technology Application on a Project Supply Chain

Science.gov (United States)

Wang, Heng

2017-01-01

Construction project productivity typically lags other industries and it has been the focus of numerous studies in order to improve the project performance. This research investigated the application of Radio Frequency Identification (RFID) technology on construction projects' supply chain and determined that RFID technology can improve the…

Testing isotopic labeling with [¹³C₆]glucose as a method of advanced glycation sites identification.

Science.gov (United States)

Kielmas, Martyna; Kijewska, Monika; Stefanowicz, Piotr; Szewczuk, Zbigniew

2012-12-01

The Maillard reaction occurring between reducing sugars and reactive amino groups of biomolecules leads to the formation of a heterogeneous mixture of compounds: early, intermediate, and advanced glycation end products (AGEs). These compounds could be markers of certain diseases and of the premature aging process. Detection of Amadori products can be performed by various methods, including MS/MS techniques and affinity chromatography on immobilized boronic acid. However, the diversity of the structures of AGEs makes detection of these compounds more difficult. The aim of this study was to test a new method of AGE identification based on isotope (13)C labeling. The model protein (hen egg lysozyme) was modified with an equimolar mixture of [(12)C(6)]glucose and [(13)C(6)]glucose and then subjected to reduction of the disulfide bridges followed by tryptic hydrolysis. The digest obtained was analyzed by LC-MS. The glycation products were identified on the basis of characteristic isotopic patterns resulting from the use of isotopically labeled glucose. This method allowed identification of 38 early Maillard reaction products and five different structures of the end glycation products. This isotopic labeling technique combined with LC-MS is a sensitive method for identification of advanced glycation end products even if their chemical structure is unknown. Copyright © 2012 Elsevier Inc. All rights reserved.

The Diffusion and Impact of Radio Frequency Identification in Supply Chains: A Multi-Method Approach

Science.gov (United States)

Wu, Xiaoran

2012-01-01

As a promising and emerging technology for supply chain management, Radio Frequency Identification (RFID) is a new alternative to existing tracking technologies and also allows a range of internal control and supply chain coordination. RFID has generated a significant amount of interest and activities from both practitioners and researchers in…

Study on the meat isotopic composition for origin identification

Directory of Open Access Journals (Sweden)

Irina Chernukha

2018-03-01

Full Text Available Russian consumer and governmental authorities are equally concerned to know where food products come from. This requires more accurate and specialized methods for the evaluation of geographical location. The following methods are used: chemometrics, histological and histochemical, genomic and proteomic, microbiological, immunochemical and mass spectrometric. Method of stable isotope analysis is becoming increasingly promising nowadays for the identification of meat and meat products' place of origin. The isotope ratios of the four elements - carbon, nitrogen, oxygen and hydrogen, are mainly determined. The method is successfully used to identify a country of origin of wines, juices and water. The aim of the research was to study the stable isotope ratios for pork and beef samples purchased in Moscow supermarkets (Russian Federation. The country of production of meat samples was determined according to specifications and/or labels. The geography of countries of meat samples origin includes Europe, both America continents and Australia. Databases collected by the All-Russian Scientific Research Institute of the Brewing, Non-Alcoholic and Wine Industrywere used for the analysis and interpretation of the results. Values of 13С/12С, δ13С, 18О/16О, δ18О, 2Н/1Н, δ2Н for 30 pork and beef samples from 13 countries were obtained. Differences in stable isotope ratios were found depending on place of origin. The data correlated with the oxygen isotope characteristics for wine, which were in the range from 2.5 to 4.5 ppm. According to the 13С/12С, δ13С results, the assumption was made about a false indication of the region for the beef sample. Despite the fact that beef was labeled as a product of Lithuania, the region of origin was most probably defined as Germany. The studies carried out showed the possibility to identify the region of raw meat origin by the stable isotope ratio.

Applied isotope hydrogeology

International Nuclear Information System (INIS)

Pearson, F.J. jr; Balderer, W.; Gautschi, A.

1991-01-01

This volume is a report on the isotopic investigations of ground-water in northern Switzerland and adjacent regions carried out since 1981 by Nagra, the Swiss National Cooperation for the Storage of Radio-active Waste. This study was undertaken to support a programme assessing potential sites for nuclear waste repositories. It includes measurements on a large number of stable- and radioisotopes and noble gases, supported by complete water chemical analyses and many rock and mineral analyses. A synthesis and interpretation of the data, along with the data themselves, are given here. (author). refs.; figs.; tabs

Optical identifications of flat-spectrum radio sources

International Nuclear Information System (INIS)

Condon, J.J.; Condon, M.A.; Broderick, J.J.; Davis, M.M.

1983-01-01

A complete sample of radio sources with S> or =0.3 Jy at 1400 MHz, +24 0 0 , and low-frequency spectral indices α(408, 1400) or =+0.5 are usually in empty fields. The lower limits that can be assigned to the radio-optical spectral indices α/sub RO/ of these sources are significantly higher than the median α/sub RO/ of the sources with flat high-frequency spectra, so the optical characteristics of the two classes of radio source are intrinsically different. The radio and optical fluxes of flat-spectrum QSO's appear to be correlated, at least when averaged over 10 2 --10 3 yr

THE SUB-mJy RADIO POPULATION OF THE E-CDFS: OPTICAL AND INFRARED COUNTERPART IDENTIFICATION

Energy Technology Data Exchange (ETDEWEB)

Bonzini, M.; Mainieri, V.; Padovani, P.; Rosati, P. [ESO, Karl-Schwarzschild-Strasse 2, D-85748 Garching (Germany); Kellermann, K. I. [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903-2475 (United States); Miller, N. [Department of Astronomy, University of Maryland, College Park, MD 20742-2421 (United States); Tozzi, P.; Balestra, I. [INAF Osservatorio Astronomico di Trieste, via G.B. Tiepolo 11, I-34131, Trieste (Italy); Vattakunnel, S. [Dipartimento di Fisica Universit di Trieste, piazzale Europa 1, I-34127 Trieste (Italy); Brandt, W. N.; Luo, B. [Department of Astronomy and Astrophysics, Pennsylvania State University, University Park, PA 16802 (United States); Xue, Y. Q., E-mail: mbonzini@eso.org [Key Laboratory for Research in Galaxies and Cosmology, Department of Astronomy, University of Science and Technology of China, Chinese Academy of Sciences, Hefei, Anhui 230026 (China)

2012-11-15

We study a sample of 883 sources detected in a deep Very Large Array survey at 1.4 GHz in the Extended Chandra Deep Field South. This paper focuses on the identification of their optical and infrared (IR) counterparts. We use a likelihood-ratio technique that is particularly useful when dealing with deep optical images to minimize the number of spurious associations. We find a reliable counterpart for 95% of our radio sources. Most of the counterparts (74%) are detected at optical wavelengths, but there is a significant fraction (21%) that are only detectable in the IR. Combining newly acquired optical spectra with data from the literature, we are able to assign a redshift to 81% of the identified radio sources (37% spectroscopic). We also investigate the X-ray properties of the radio sources using the Chandra 4 Ms and 250 ks observations. In particular, we use a stacking technique to derive the average properties of radio objects undetected in the Chandra images. The results of our analysis are collected in a new catalog containing the position of the optical/IR counterpart, the redshift information, and the X-ray fluxes. It is the deepest multi-wavelength catalog of radio sources, which will be used for future study of this galaxy population.

Use of Time-Frequency Analysis and Neural Networks for Mode Identification in a Wireless Software-Defined Radio Approach

Directory of Open Access Journals (Sweden)

Matteo Gandetto

2004-09-01

Full Text Available The use of time-frequency distributions is proposed as a nonlinear signal processing technique that is combined with a pattern recognition approach to identify superimposed transmission modes in a reconfigurable wireless terminal based on software-defined radio techniques. In particular, a software-defined radio receiver is described aiming at the identification of two coexistent communication modes: frequency hopping code division multiple access and direct sequence code division multiple access. As a case study, two standards, based on the previous modes and operating in the same band (industrial, scientific, and medical, are considered: IEEE WLAN 802.11b (direct sequence and Bluetooth (frequency hopping. Neural classifiers are used to obtain identification results. A comparison between two different neural classifiers is made in terms of relative error frequency.

Radio-isotope powered light source

International Nuclear Information System (INIS)

Spottiswoode, N.L.; Ryden, D.J.

1979-01-01

The light source described comprises a radioisotope fuel source, thermal insulation against heat loss, a biological shield against the escape of ionizing radiation and a material having a surface which attains incandescence when subject to isotope decay heat. There is then a means for transferring this heat to produce incandescence of the surface and thus emit light. A filter associated with the surface permits a relatively high transmission of visible radiation but has a relatively high reflectance in the infra red spectrum. Such light sources require the minimum of attention and servicing and are therefore suitable for use in navigational aids such as lighthouses and lighted buoys. The isotope fuel sources and thus the insulation and shielding and the incandescent material can be chosen for the use required and several sources, materials, means of housing etc. are detailed. Operation and efficiency are discussed. (U.K.)

Security risks associated with radio frequency identification in medical environments.

Science.gov (United States)

Hawrylak, Peter J; Schimke, Nakeisha; Hale, John; Papa, Mauricio

2012-12-01

Radio frequency identification (RFID) is a form of wireless communication that is used to identify assets and people. RFID has significant benefits to the medical environment. However, serious security threats are present in RFID systems that must be addressed in a medical environment. Of particular interest are threats to patient privacy and safety based on interception of messages, interruption of communication, modification of data, and fabrication of messages and devices. This paper presents an overview of these security threats present in RFID systems in a medical environment and provides guidance on potential solutions to these threats. This paper provides a roadmap for researchers and implementers to address the security issues facing RFID in the medical space.

Identification of Thioredoxin Target Disulfides Using Isotope-Coded Affinity Tags

DEFF Research Database (Denmark)

Hägglund, Per; Bunkenborg, Jakob; Maeda, Kenji

2014-01-01

Thioredoxins (Trx) are small redox proteins that reduce disulfide bonds in various target proteins and maintain cellular thiol redox control. Here, a thiol-specific labeling and affinity enrichment approach for identification and relative quantification of Trx target disulfides in complex protein...... reduction is determined by LC-MS/MS-based quantification of tryptic peptides labeled with "light" (12C) and "heavy" (13C) ICAT reagents. The methodology can be adapted to monitor the effect of different reductants or oxidants on the redox status of thiol/disulfide proteomes in biological systems....... extracts is described. The procedure utilizes the isotope-coded affinity tag (ICAT) reagents containing a thiol reactive iodoacetamide group and a biotin affinity tag to target peptides containing reduced cysteine residues. The identification of substrates for Trx and the extent of target disulfide...

Isotopic abundances relevant to the identification of magma sources

International Nuclear Information System (INIS)

O'Nions, R.K.

1984-01-01

The behaviour of natural radiogenic isotope tracers in the Earth that have lithophile and atmophile geochemical affinity is reviewed. The isotope tracer signature of oceanic and continental crust may in favourable circumstances by sufficiently distinct from that of the mantle to render a contribution from these sources resolvable within the isotopic composition of the magma. Components derived from the sedimentary and altered basaltic portion of oceanic crust are recognized in some island arc magmas from their Sr, Nd and Pb isotopic signatures. The rare-gas isotope tracers (He, Ar, Xe in particular) are not readily recycled into the mantle and thus provide the basis of an approach that is complementary to that based on the lithophile tracers. In particular, a small mantle-derived helium component may be readily recognized in the presence of a predominant radiogenic component generated in the continents. The importance of assessing the mass balance of these interactions rather than merely a qualitative recognition is emphasized. The question of the relative, contribution of continental-oceanic crust and mantle to magma sources is an essential part of the problem of generation and evolution of continental crust. An approach to this problem through consideration of the isotopic composition of sediments is briefly discussed. (author)

Isotopic diagnosis of peripheral thrombosis

International Nuclear Information System (INIS)

Cornu, Pierre; Scalet, Michel

1975-01-01

Radio-isotope diagnosis of peripheral venous thrombosis, using tracer doses of iodine-labelled fibrinogen, provides an important contribution to the solution of the worrying problem of pulmonary embolism due to latent phlebitis. This elegant and precise technique permits early diagnosis of venous thrombosis of the lower limbs at a subclinical stage. It has permitted determination of the frequency, both after surgery and after myocardial infarction, and above all, it provides an objective criterion for assessment of the efficacy of prophylactic measures proposed [fr

Tritium in the environment and around the institution for the usage of radio-isotopes

International Nuclear Information System (INIS)

Matsunami, Tadao; Ishiyama, Toshio; Kobashigawa, Akira; Yamada, Osamu.

1986-01-01

The behavior of tritium in the environment and the tritium content of the liquid wastes were investigated at a facility for the usage of radio-isotopes from 1982 ∼ 1985. Rain water, tap water, well water and waste water samples were collected at the facility. River samples were collected three times from the four main rivers in the Southern Osaka. The results of monthly concentration of tritium were found to fall in the ranges, 0 ∼ 219 pCi/l, since January 1982. The increases in the concentration of tritium in July and August, 1982 are possibly ascribed to the 26-th Chinese nuclear explosion. The order of the concentration of tritium was as follows : waste water (an outlet of drainage) < tap water < rain water < river water < well water. (author)

Radio frequency identification and time-driven activity based costing:RFID-TDABC application in warehousing

OpenAIRE

Bahr, Witold; Price, Brian J

2016-01-01

Purpose: This paper extends the use of Radio Frequency Identification (RFID) data for accounting of warehouse costs and services. Time Driven Activity Based Costing (TDABC) methodology is enhanced with the real-time collected RFID data about duration of warehouse activities. This allows warehouse managers to have accurate and instant calculations of costs. The RFID enhanced TDABC (RFID-TDABC) is proposed as a novel application of the RFID technology. Research Approach: Application of RFID-TDA...

Internet of things and radio frequency identification in care taking, facts and privacy challenges.

OpenAIRE

Frederix, Ines

2009-01-01

Internet of Things technologies such as radio frequency identification are about to be able to help aging and sick people and even compensate for some disabilities. The use of these technologies in health care represents a promising development in information technology, but also raises important ethical, legal and social issues. This paper explores the use of these technologies in health care environments and formulates recommendations for further research that can ensure that the pati...

Functional screen printed radio frequency identification tags on flexible substrates, facilitating low-cost and integrated point-of-care diagnostics

CSIR Research Space (South Africa)

Smith, Suzanne

2018-05-01

Full Text Available This work explores the practical functionality of ultra-high frequency (UHF) radio frequency identification (RFID) tags screen printed onto various low-cost, flexible substrates. The need for integrated and automated low-cost point...

Retention and readability of radio frequency identification transponders in beef cows over a five-year period

Science.gov (United States)

Objective of this study was to evaluate failure (loss or inability to read) of radio frequency identification (RFID) ear tags in beef cows over a 2 to 5 year period under ranching conditions. One of 5 types of RFID tags was applied in the ear of a total of 4316 cows on 4 separate ranches. Tags wer...

Assessment of groundwater salinization mechanisms in Santiago Island - Cabo Verde: An environmental isotopic approach

International Nuclear Information System (INIS)

Carreira, P.M.; Nunes, D.; Marques, J.M.; Pina, A.; Mota Gomes, A.; Almeida, E.; Goncalves, R.; Monteiro Santos, F.

2007-01-01

Two sampling campaigns were carried out at Santiago Island - Cabo Verde under the scope of an isotopic and geochemical research study. An evaluation of the groundwater systems was carried out through the application of environmental isotopes and geochemical data in order to answer questions such as: origin and mechanisms of groundwater recharge; relation between the hydrochemical evolution of the groundwater systems with the geological matrix (minerals dissolution) or mixture with seawater and aerosol marine influence; identification of seawater intrusion mechanisms and, determination of the apparent groundwater 'age'. The results obtained so far are not conclusive on the identification of the process responsible for the increase of salinity. In general, all the data obtained seems to indicate that the waters have the same isotopic history but different geochemical evolution, which depends on the weathering and permeability of the rocks. (author)

Essays on the Effect of Radio Frequency Identification (RFID) on the Management of Healthcare Supply Chain Performance

Science.gov (United States)

Cakici, Ozden Engin

2012-01-01

This dissertation examines three issues on the effect of Radio Frequency Identification (RFID) on the management of healthcare supply chain performance within the context of inventory management. Motivated by a case study conducted in a radiology practice, the second chapter analyzes the incremental benefits of RFID over barcodes for managing…

Radio frequency identification enabled wireless sensing for intelligent food logistics.

Science.gov (United States)

Zou, Zhuo; Chen, Qiang; Chen, Qing; Uysal, Ismail; Zheng, Lirong

2014-06-13

Future technologies and applications for the Internet of Things (IoT) will evolve the process of the food supply chain and create added value of business. Radio frequency identifications (RFIDs) and wireless sensor networks (WSNs) have been considered as the key technological enablers. Intelligent tags, powered by autonomous energy, are attached on objects, networked by short-range wireless links, allowing the physical parameters such as temperatures and humidities as well as the location information to seamlessly integrate with the enterprise information system over the Internet. In this paper, challenges, considerations and design examples are reviewed from system, implementation and application perspectives, particularly with focus on intelligent packaging and logistics for the fresh food tracking and monitoring service. An IoT platform with a two-layer network architecture is introduced consisting of an asymmetric tag-reader link (RFID layer) and an ad-hoc link between readers (WSN layer), which are further connected to the Internet via cellular or Wi-Fi. Then, we provide insights into the enabling technology of RFID with sensing capabilities. Passive, semi-passive and active RFID solutions are discussed. In particular, we describe ultra-wideband radio RFID which has been considered as one of the most promising techniques for ultra-low-power and low-cost wireless sensing. Finally, an example is provided in the form of an application in fresh food tracking services and corresponding field testing results.

Biomolecular tracing using long-lived isotopes

International Nuclear Information System (INIS)

Vogel, J.S.; Turteltaub, K.W.; Frantz, C.E.; Keating, G.; Felton, J.S.; Southon, J.R.; Roberts, M.R.; Gledhill, B.L.

1992-01-01

Accelerator mass spectrometry (AMS) was developed over the past 15 years as an essential tool for detecting long-lived, cosmogenic radio-isotopes in the earth and space sciences. We apply this technology to the measurement of chemical kinetics, primarily in biomedical systems, which had heretofore employed short-lived isotopes and/or long counting times to quantify radio-isotopic labels. AMS provides detection efficiencies of ∼ 1%, 10 3 to 10 6 better than decay-counting. Long-lived isotopes are used and detected with AMS at concentrations which reduce sample size, chemical dose, radiation safety hazards and radiolysis. We measure 3 H, 7,1O Be, 14 C, 26 Al, 36 CI, 41 Ca and 129 I, but most of our current program uses 14 C. Initial experiments involved research on the genotoxicity of mutagens in cooked foods and reversible binding of compounds to antibodies. Through collaborations, we apply AMS detection to research in carcinogenesis, pharmacokinetics of toxins, elemental metabolism, distribution of topical medications and nutrition

Isotope production

Energy Technology Data Exchange (ETDEWEB)

Lewis, Dewi M.

1995-07-15

Some 2 0% of patients using radiopharmaceuticals receive injections of materials produced by cyclotrons. There are over 200 cyclotrons worldwide; around 35 are operated by commercial companies solely for the production of radio-pharmaceuticals with another 25 accelerators producing medically useful isotopes. These neutron-deficient isotopes are usually produced by proton bombardment. All commonly used medical isotopes can be generated by 'compact' cyclotrons with energies up to 40 MeV and beam intensities in the range 50 to 400 microamps. Specially designed target systems contain gram-quantities of highly enriched stable isotopes as starting materials. The targets can accommodate the high power densities of the proton beams and are designed for automated remote handling. The complete manufacturing cycle includes large-scale target production, isotope generation by cyclotron beam bombardment, radio-chemical extraction, pharmaceutical dispensing, raw material recovery, and labelling/packaging prior to the rapid delivery of these short-lived products. All these manufacturing steps adhere to the pharmaceutical industry standards of Good Manufacturing Practice (GMP). Unlike research accelerators, commercial cyclotrons are customized 'compact' machines usually supplied by specialist companies such as IBA (Belgium), EBCO (Canada) or Scanditronix (Sweden). The design criteria for these commercial cyclotrons are - small magnet dimensions, power-efficient operation of magnet and radiofrequency systems, high intensity extracted proton beams, well defined beam size and automated computer control. Performance requirements include rapid startup and shutdown, high reliability to support the daily production of short-lived isotopes and low maintenance to minimize the radiation dose to personnel. In 1987 a major step forward in meeting these exacting industrial requirements came when IBA, together with the University of Louvain-La-Neuve in Belgium, developed the Cyclone-30

Assessing wine quality using isotopic methods

International Nuclear Information System (INIS)

Costinel, Diana; Ionete, Roxana Elena; Vremera, Raluca; Stefanescu, Ioan

2010-01-01

Full text: The analytical methods used to determine the isotope ratios of deuterium, carbon-13 and oxygen-18 in wines have gained official recognition from the Office International de la Vigne et du Vin (OIV) and National Organisation of Vine and Wine. The amount of stable isotopes in water and carbon dioxide from plant organic materials and their distribution in sugar and ethanol molecules are influenced by geo-climatic conditions of the region, grape varieties and the year of harvest. For wine characterization, to prove the botanical and geographical origin of the raw material, the isotopic analysis by continuous flow mass spectrometry CF-IRMS has made a significant contribution. This paper emphasize the results of a study concerning the assessing of water adulterated wines and non-grape alcohol and sugar additions at different concentration levels, using CF-IRMS analytical technique. (authors)

Development of corrosion condition sensing and monitoring system using radio-frequency identification devices (RFID)

Energy Technology Data Exchange (ETDEWEB)

Gu, G.P.; Zheng, W. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Materials Technology Laboratory

2008-05-15

This study discussed the development of a corrosion sensing and monitoring system for military land vehicles. Radio-frequency identification device (RFID) technology uses radio waves to identify individual masses with RFID tags attached. A corrosion-sensing element was integrated with the RFID technology, which incorporated a galvanic corrosion cell designed to trigger RFID tags. Corrosion severity was then related to the galvanic current. The tag recorded the sensor reading and transmitted the data to an RFID reader. The tags consisted of a microchip and an antenna. A software development kit has also been developed to interface RFID data with existing applications. While it is currently not possible to modify the RFID tags to prevent security risks, further research is being conducted to assemble a data-logger system with corrosion probes to measure humidity, electrical resistance, and linear polarization resistance. Studies will also be conducted to assemble an active tag reader system and investigate potential modifications. 4 refs., 1 fig., 1 appendix.

Review of Radio Frequency Identification and Wireless Technology for Structural Health Monitoring

Energy Technology Data Exchange (ETDEWEB)

Dhital, Dipesh; Chia, Chen Ciang; Lee, Jung Ryul [Chonbuk National University, Jeonju (Korea, Republic of); Park, Chan Yik [Aeronautical Technology Directorate, Agency for Defense Development, Daejeon (Korea, Republic of)

2010-06-15

Radio frequency identification(RFID) combined with wireless technology has good potential for structural health monitoring(SHM). We describe several advantages of RFID and wireless technologies for SHM, and review SHM examples with working principles, design and technical details for damage detection, heat exposure monitoring, force/strain sensing, and corrosion detection in concrete, steel, carbon fiber reinforced polymer(CFRP), and other materials. Various sensors combined with wireless communication are also discussed. These methodologies can be readily developed, implemented, and customized. There are some technical difficulties, but solutions are being addressed. Lastly, a surface acoustic wave-based RFID system is presented, and possible future trends of SHM based on RFID and wireless technology are presented

Review of Radio Frequency Identification and Wireless Technology for Structural Health Monitoring

International Nuclear Information System (INIS)

Dhital, Dipesh; Chia, Chen Ciang; Lee, Jung Ryul; Park, Chan Yik

2010-01-01

Radio frequency identification(RFID) combined with wireless technology has good potential for structural health monitoring(SHM). We describe several advantages of RFID and wireless technologies for SHM, and review SHM examples with working principles, design and technical details for damage detection, heat exposure monitoring, force/strain sensing, and corrosion detection in concrete, steel, carbon fiber reinforced polymer(CFRP), and other materials. Various sensors combined with wireless communication are also discussed. These methodologies can be readily developed, implemented, and customized. There are some technical difficulties, but solutions are being addressed. Lastly, a surface acoustic wave-based RFID system is presented, and possible future trends of SHM based on RFID and wireless technology are presented

Monitoring Pharmacy Student Adherence to World Health Organization Hand Hygiene Indications Using Radio Frequency Identification.

Science.gov (United States)

Decker, Andrew S; Cipriano, Gabriela C; Tsouri, Gill; Lavigne, Jill E

2016-04-25

Objective. To assess and improve student adherence to hand hygiene indications using radio frequency identification (RFID) enabled hand hygiene stations and performance report cards. Design. Students volunteered to wear RFID-enabled hospital employee nametags to monitor their adherence to hand-hygiene indications. After training in World Health Organization (WHO) hand hygiene methods and indications, student were instructed to treat the classroom as a patient care area. Report cards illustrating individual performance were distributed via e-mail to students at the middle and end of each 5-day observation period. Students were eligible for individual and team prizes consisting of Starbucks gift cards in $5 increments. Assessment. A hand hygiene station with an RFID reader and dispensing sensor recorded the nametag nearest to the station at the time of use. Mean frequency of use per student was 5.41 (range: 2-10). Distance between the student's seat and the dispenser was the only variable significantly associated with adherence. Student satisfaction with the system was assessed by a self-administered survey at the end of the study. Most students reported that the system increased their motivation to perform hand hygiene as indicated. Conclusion. The RFID-enabled hand hygiene system and benchmarking reports with performance incentives was feasible, reliable, and affordable. Future studies should record video to monitor adherence to the WHO 8-step technique.

The amount of radio isotope used and control of its use in our hospital

International Nuclear Information System (INIS)

Kawanishi, Yukio; Matsuura, Motoo

1981-01-01

The most difficult point in handling of radio isotope (RI) is that the operator is liable to be exposed to it before he is aware of it. In case of X-rays coming from the X-ray equipment, the risk can be totally eliminated just by switching-off. With RI, however, there is always the risk of contamination, and the operator often has to work in close contact with it. Of course, handling of and protective measures against RI are specified by the law, and the maximum permisible dose is never exceeded in our hospital. But it is not sufficient to keep the maximum level alone, but we ought to go farther to limit the exposure to the bare minimum and make studies on situations of exposure during work. The present report describes the amount of RI handled and situations of exposure suffered by the operators in RI room of our hospital together with discussion about various problems. (author)

A Novel L-Shape Ultra Wideband Chipless Radio-Frequency Identification Tag

Directory of Open Access Journals (Sweden)

Khaled Issa

2017-01-01

Full Text Available A novel compact dual-polarized-spectral-signature-based chipless radio-frequency identification (RFID tag is presented. Specifically, an L-shape resonator-based structure is optimized to have different spectral signatures in both horizontal and vertical polarizations, in order to double the encoding capacity. Resonators’ slot width and the space between closely placed resonators are also optimized to enhance the mutual coupling, thereby helping in achieving high-data encoding density. The proposed RFID tag operates over 5 GHz to 10 GHz frequency band. As a proof of concept, three different 18-bit dual-polarized RFID tags are simulated, fabricated, and tested in an anechoic chamber environment. The measurement data show reasonable agreement with the simulation results, with respect to resonators’ frequency positions, null depth, and their bandwidth over the operational spectrum.

Policy Options for Radio Frequency Identification (RFID) Application in Healthcare; a Prospective View: Final Report (D5).

Science.gov (United States)

van Oranje-Nassau, Constantijn; Schindler, Helen Rebecca; Vilamovska, Anna-Marie; Botterman, Maarten

2012-01-01

This article reviews the state of play of European markets and applications of Radio Frequency Identification (RFID) technology in healthcare in Europe. Based on the current situation the study presents three scenarios for 2020, to describe futures in which the technology and health care sectors develop in different ways. The scenarios were discussed in expert workshops to derive issues that need to be addressed by future policies of the European Union and other stakeholders. The market assessment is based on a review of literature and an analysis of proprietary market data. The information on the state of RFID applications in Health in Europe summarises the results of a literature review, an online Delphi survey, expert interviews and seven cases studies in Europe and the US. The policy analysis is based on the outcomes of a scenario gaming workshop with experts from academia, industry, healthcare providers, policymakers and representatives of patient organisations.

Electromagnetic Interference Assessment of CDMA and GSM Wireless Phones to Aircraft Navigation Radios

Science.gov (United States)

Ely, Jay J.; Nguyen, Truong X.; Koppen, Sandra V.; Salud, M. Theresa

2002-01-01

To address the concern for cellular phone electromagnetic interference (EMI) to aircraft radios, a radiated emission measurement process for CDMA (IS-95) and GSM (ETSI GSM 11.22) wireless handsets was developed. Spurious radiated emissions were efficiently characterized from devices tested in either a semi-anechoic or reverberation chamber, in terms of effective isotropic radiated power. Eight representative handsets (4 GSM, 4 CDMA) were commanded to operate while varying their radio transmitter parameters (power, modulation, etc.). This report provides a detailed description of the measurement process and resulting data, which may subsequently be used by others as a basis of consistent evaluation for cellular/PCS phones, Bluetooth, IEEE802.11b, IEEE802.11a, FRS/GMRS radios, and other portable transmitters. Aircraft interference path loss (IPL) and navigation radio interference threshold data from numerous reference documents, standards, and NASA partnerships were compiled. Using this data, a preliminary risk assessment is provided for CDMA and GSM wireless phone interference to aircraft localizer, Glideslope, VOR, and GPS radio receivers on typical transport airplanes. The report identifies where existing data for device emissions, IPL, and navigation radio interference thresholds needs to be extended for an accurate risk assessment for wireless transmitters in aircraft.

Design of Meander-Line Antennas for Radio Frequency Identification Based on Multiobjective Optimization

Directory of Open Access Journals (Sweden)

X. L. Travassos

2012-01-01

Full Text Available This paper presents optimization problem formulations to design meander-line antennas for passive UHF radio frequency identification tags based on given specifications of input impedance, frequency range, and geometric constraints. In this application, there is a need for directive transponders to select properly the target tag, which in turn must be ideally isotropic. The design of an effective meander-line antenna for RFID purposes requires balancing geometrical characteristics with the microchip impedance. Therefore, there is an issue of optimization in determining the antenna parameters for best performance. The antenna is analyzed by a method of moments. Some results using a deterministic optimization algorithm are shown.

Discovery of the cadmium isotopes

International Nuclear Information System (INIS)

Amos, S.; Thoennessen, M.

2010-01-01

Thirty-seven cadmium isotopes have been observed so far and the discovery of these isotopes is discussed here. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

Discovery of the iron isotopes

International Nuclear Information System (INIS)

Schuh, A.; Fritsch, A.; Heim, M.; Shore, A.; Thoennessen, M.

2010-01-01

Twenty-eight iron isotopes have been observed so far and the discovery of these isotopes is discussed here. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

Discovery of the silver isotopes

International Nuclear Information System (INIS)

Schuh, A.; Fritsch, A.; Ginepro, J.Q.; Heim, M.; Shore, A.; Thoennessen, M.

2010-01-01

Thirty-eight silver isotopes have been observed so far and the discovery of these isotopes is discussed here. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

Scoping assessment on medical isotope production at the Fast Flux Test Facility

International Nuclear Information System (INIS)

Scott, S.W.

1997-01-01

The Scoping Assessment addresses the need for medical isotope production and the capability of the Fast Flux Test Facility to provide such isotopes. Included in the discussion are types of isotopes used in radiopharmaceuticals, which types of cancers are targets, and in what way isotopes provide treatment and/or pain relief for patients

Scoping assessment on medical isotope production at the Fast Flux Test Facility

Energy Technology Data Exchange (ETDEWEB)

Scott, S.W.

1997-08-29

The Scoping Assessment addresses the need for medical isotope production and the capability of the Fast Flux Test Facility to provide such isotopes. Included in the discussion are types of isotopes used in radiopharmaceuticals, which types of cancers are targets, and in what way isotopes provide treatment and/or pain relief for patients.

Identification of a Likely Radio Counterpart to the Rapid Burster

Science.gov (United States)

Moore, Christopher B.; Rutledge, Robert E.; Fox, Derek W.; Guerriero, Robert A.; Lewin, Walter H. G.; Fender, Robert; van Paradijs, Jan

2000-04-01

We have identified a likely radio counterpart to the low-mass X-ray binary MXB 1730-335 (the Rapid Burster). The counterpart has shown 8.4 GHz radio on/off behavior correlated with the X-ray on/off behavior as observed by the RXTE/ASM during six VLA observations. The probability of an unrelated, randomly varying background source duplicating this behavior is 1%-3% depending on the correlation timescale. The location of the radio source is R.A. 17h33m24.61s, decl. -33 deg23'19.8" (J2000), +/-0.1". We do not detect 8.4 GHz radio emission coincident with type II (accretion-driven) X-ray bursts. The ratio of radio to X-ray emission during such bursts is constrained to be below the ratio observed during X-ray-persistent emission at the 2.9 σ level. Synchrotron bubble models of the radio emission can provide a reasonable fit to the full data set, collected over several outbursts, assuming that the radio evolution is the same from outburst to outburst but given the physical constraints the emission is more likely to be due to ~1 hr radio flares such as have been observed from the X-ray binary GRS 1915+105.

Quantitative assessment of the brain perfusion using the short-lived isotope 195m-Au

International Nuclear Information System (INIS)

Lindner, P.; Nickel, O.

1985-01-01

The possibilities of quantitatively assessing the brain perfusion on the basis of a modified transit time theory, using the favourable properties of the ultrashort-lived isotope 195m-Au, are shown. The intravascular deposition of the isotope 195m-Au enables quantitative brain perfusion studies based on both the dorsal and lateral projection. The 195m-Au isotope has a half-life of 30 sec and is able to be eluated from the 195m-Hg 195m-Au generator (Byk-Mallinckrodt). The quantification of brain perfusion (in terms of ml/min/100 g) is based on a recently published theory for non-diffusing radio-indicators, using a first-pass technique. This method of quantification corresponds to a modification of the transit time theory from Maier and Zierler (1) and accounts for the influences of dispersion and recirculation of an intravenously injected non-diffused tracer bolus (2, 3). The energy spectrum of the eluate from the generator shows two lines of high intensity at 262 keV and 68 keV. The low-energy peak is suited for the lateral view, i.e. brain perfusion studies of one hemisphere, without a significant 'look-through-effect'. The high-energy peak is successfully used for dorsal projections of brain perfusion studies. An examination takes less time than one minute and can be repeated after three minutes. Dynamic brain perfusion studies enable parametric images of the quantitative regional brain perfusion distribution, or the reciprocal mean transit times, to be obtained by calculation. Infarcted areas are able to be visualized with high sensitivity. Quantitative perfusion patterns during activation of the visual centre are detectable. The advantages of this method are discussed. (orig.) [de

In-Born Radio Frequency Identification Devices for Safeguards Use at Gas-Centrifuge Enrichment Plants

International Nuclear Information System (INIS)

Ward, R.; Rosenthal, M.

2009-01-01

Global expansion of nuclear power has made the need for improved safeguards measures at Gas Centrifuge Enrichment Plants (GCEPs) imperative. One technology under consideration for safeguards applications is Radio Frequency Identification Devices (RFIDs). RFIDs have the potential to increase IAEA inspector's efficiency and effectiveness either by reducing the number of inspection visits necessary or by reducing inspection effort at those visits. This study assesses the use of RFIDs as an integral component of the 'Option 4' safeguards approach developed by Bruce Moran, U.S. Nuclear Regulatory Commission (NRC), for a model GCEP [1]. A previous analysis of RFIDs was conducted by Jae Jo, Brookhaven National Laboratory (BNL), which evaluated the effectiveness of an RFID tag applied by the facility operator [2]. This paper presents a similar evaluation carried out in the framework of Jo's paper, but it is predicated on the assumption that the RFID tag is applied by the manufacturer at the birth of the cylinder, rather than by the operator. Relevant diversion scenarios are examined to determine if RFIDs increase the effectiveness and/ or efficiency of safeguards in these scenarios. Conclusions on the benefits offered to inspectors by using in-born RFID tagging are presented.

Radio frequency electromagnetic field compliance assessment of multi-band and MIMO equipped radio base stations.

Science.gov (United States)

Thors, Björn; Thielens, Arno; Fridén, Jonas; Colombi, Davide; Törnevik, Christer; Vermeeren, Günter; Martens, Luc; Joseph, Wout

2014-05-01

In this paper, different methods for practical numerical radio frequency exposure compliance assessments of radio base station products were investigated. Both multi-band base station antennas and antennas designed for multiple input multiple output (MIMO) transmission schemes were considered. For the multi-band case, various standardized assessment methods were evaluated in terms of resulting compliance distance with respect to the reference levels and basic restrictions of the International Commission on Non-Ionizing Radiation Protection. Both single frequency and multiple frequency (cumulative) compliance distances were determined using numerical simulations for a mobile communication base station antenna transmitting in four frequency bands between 800 and 2600 MHz. The assessments were conducted in terms of root-mean-squared electromagnetic fields, whole-body averaged specific absorption rate (SAR) and peak 10 g averaged SAR. In general, assessments based on peak field strengths were found to be less computationally intensive, but lead to larger compliance distances than spatial averaging of electromagnetic fields used in combination with localized SAR assessments. For adult exposure, the results indicated that even shorter compliance distances were obtained by using assessments based on localized and whole-body SAR. Numerical simulations, using base station products employing MIMO transmission schemes, were performed as well and were in agreement with reference measurements. The applicability of various field combination methods for correlated exposure was investigated, and best estimate methods were proposed. Our results showed that field combining methods generally considered as conservative could be used to efficiently assess compliance boundary dimensions of single- and dual-polarized multicolumn base station antennas with only minor increases in compliance distances. © 2014 Wiley Periodicals, Inc.

Identification of new neutron-rich actinide isotopes

Energy Technology Data Exchange (ETDEWEB)

Oura, Yasuji; Sakama, Minoru; Ohyama, T. [Tokyo Metropolitan Univ. (Japan)] [and others

1999-10-01

To advance research on new neutron-deficient actinide isotopes using an on-line isotope separator combined with a gas-jet injector installed in the JAERI Tandem accelerator, Tokai, performance test of the equipment was carried out. Efficiency of the product isotopes being transported from the target chamber to the measuring system was greatly improved by employing lead iodides (PbI{sub 2}) as the aerosol carrier. With the help of this technique, the authors succeeded in synthesizing and identifying actinide isotopes, {sup 235}Am and {sup 236}Am, and measured their alpha-decay half-life. (S. Ohno)

Cooperation on Improved Isotopic Identification and Analysis Software for Portable, Electrically Cooled High-Resolution Gamma Spectrometry Systems Final Report

Energy Technology Data Exchange (ETDEWEB)

Dreyer, Jonathan G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wang, Tzu-Fang [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vo, Duc T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Funk, Pierre F. [Inst. for Radiological Protection and Nuclear Safety (IRSN), Fontenay-aux-Roses (France); Weber, Anne-Laure [Inst. for Radiological Protection and Nuclear Safety (IRSN), Fontenay-aux-Roses (France)

2017-07-20

Under a 2006 agreement between the Department of Energy (DOE) of the United States of America and the Institut de Radioprotection et de Sûreté Nucléaire (IRSN) of France, the National Nuclear Security Administration (NNSA) within DOE and IRSN initiated a collaboration to improve isotopic identification and analysis of nuclear material [i.e., plutonium (Pu) and uranium (U)]. The specific aim of the collaborative project was to develop new versions of two types of isotopic identification and analysis software: (1) the fixed-energy response-function analysis for multiple energies (FRAM) codes and (2) multi-group analysis (MGA) codes. The project is entitled Action Sheet 4 – Cooperation on Improved Isotopic Identification and Analysis Software for Portable, Electrically Cooled, High-Resolution Gamma Spectrometry Systems (Action Sheet 4). FRAM and MGA/U235HI are software codes used to analyze isotopic ratios of U and Pu. FRAM is an application that uses parameter sets for the analysis of U or Pu. MGA and U235HI are two separate applications that analyze Pu or U, respectively. They have traditionally been used by safeguards practitioners to analyze gamma spectra acquired with high-resolution gamma spectrometry (HRGS) systems that are cooled by liquid nitrogen. However, it was discovered that these analysis programs were not as accurate when used on spectra acquired with a newer generation of more portable, electrically cooled HRGS (ECHRGS) systems. In response to this need, DOE/NNSA and IRSN collaborated to update the FRAM and U235HI codes to improve their performance with newer ECHRGS systems. Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL) performed this work for DOE/NNSA.

American West Tephras – Geomagnetic polarity events redefined through calibration of radio-isotopic and astronomical time

DEFF Research Database (Denmark)

Rivera, Tiffany; Storey, Michael

calibration. Although this geomagnetic event is not part of the most recent geologic timescale, refined ages on short-lived excursions could hold importance to understanding time scales for the wavering nature of Earth’s magnetic field. We propose a new 40Ar/39Ar age for the Quaternary mineral dating standard......The foundation of the EARTHTIME/GTSnext initiative seeks to construct an internally consistent geologic timescale based on astronomical and radio-isotopic geochronology. American west tephras offer a prime opportunity to integrate these two independent timescales with the geomagnetic timescale....... Using an astronomically calibrated age for the monitor mineral Fish Canyon sanidine (FCs;28.201 ± 0.046 Ma, Kuiper, et al., 2008), ages of Pleistocene geomagnetic polarity events are reexamined. Of particular interest, the Quaternary mineral dating standard Alder Creek sandine (ACs) is the type locality...

Radio Frequency Identification (RFID) technology and patient safety.

Science.gov (United States)

Ajami, Sima; Rajabzadeh, Ahmad

2013-09-01

Radio frequency identification (RFID) systems have been successfully applied in areas of manufacturing, supply chain, agriculture, transportation, healthcare, and services to name a few. However, the different advantages and disadvantages expressed in various studies of the challenges facing the technology of the use of the RFID technology have been met with skepticism by managers of healthcare organizations. The aim of this study was to express and display the role of RFID technology in improving patient safety and increasing the impact of it in healthcare. This study was non-systematical review, which the literature search was conducted with the help of libraries, books, conference proceedings, PubMed databases and also search engines available at Google, Google scholar in which published between 2004 and 2013 during Febuary 2013. We employed the following keywords and their combinations; RFID, healthcare, patient safety, medical errors, and medication errors in the searching areas of title, keywords, abstract, and full text. The preliminary search resulted in 68 articles. After a careful analysis of the content of each paper, a total of 33 papers was selected based on their relevancy. We should integrate RFID with hospital information systems (HIS) and electronic health records (EHRs) and support it by clinical decision support systems (CDSS), it facilitates processes and reduce medical, medication and diagnosis errors.

Assessment of Potential Nitrate Pollution Sources in the Marano Lagoon (Italy) and its Catch Mentarea Using a Multi Isotope Approach

Energy Technology Data Exchange (ETDEWEB)

Saccon, P.; Leis, A. [Joanneum Research Forschungsgesellschaft mbH, Institute for Water, Energy and Sustainability, Graz (Austria); Marca, A.; Kaiser, J.; Campisi, L. [School of Environmental Sciences, University of East Anglia, Norwich (United Kingdom); Savarino, J.; Erbland, J. [UJF-Grenoble 1/CNRS-INSU, Laboratoire de Glaciologie et Geophysique de l' Environnement, St.-Martin-d' Heres (France); Boettcher, M. E. [Leibniz Institute for Baltic Sea Research, Geochemistry and Isotope Geochemistry Group, Marine Geology Section, Warnemuende (Germany); Eisenhauer, A. [IFM-GEOMAR, Kiel (Germany); Sueltenfuss, J. [University of Bremen, Institute of Environmental Physics, Section of Oceanography, Bremen (Germany)

2013-07-15

The aims of this study were mainly: (i) the identification and differentiation of the main anthropogenic nitrogen sources in the Marano Lagoon (Italy) and its catchment area; and (ii) the assessment of the intra-lagoonal water circulation, the morphological development of the lagoon and its anthropogenic pressure by applying a combined approach of hydrochemical, isotopic and remote sensing techniques. To achieve the aforementioned targets analyses of the stable isotope signatures of nitrate, boron, water and sulphate have been used. Moreover the residence times of groundwater were determined by the tritium-helium dating method. To characterize the chemical composition of the different water types the concentrations of the major ions and nutrients as well as the physicochemical parameters have been measured. Remote sensing techniques have been applied to assess the spatial distribution of the most superficial algal flora, water temperature as well as the key environmental and morphological changes of the lagoon since the beginning of the 1970s. (author)

Assessment of Potential Nitrate Pollution Sources in the Marano Lagoon (Italy) and its Catchment Area Using a Multi Isotope Approach

International Nuclear Information System (INIS)

Saccon, P.; Leis, A.; Marca, A.; Kaiser, J.; Campisi, L.; Savarino, J.; Erbland, J.; Boettcher, M.E.; Eisenhauer, A.; Sueltenfuss, J.

2011-01-01

The aims of this study were mainly: (i) the identification and differentiation of the main anthropogenic nitrogen sources in the Marano Lagoon (Italy) and its catchment area; and (ii) the assessment of the intra-lagoonal water circulation, the morphological development of the lagoon and its anthropogenic pressure by applying a combined approach of hydrochemical, isotopic and remote sensing techniques. To achieve the aforementioned targets analyses of stable isotope signatures of nitrate, boron, water and sulphate have been used. Moreover the residence times of groundwater were determined by the tritium-helium dating method. To characterize the chemical composition of the different water types the concentrations of the major ions and nutrients as well as the physicochemical parameters have been measured. Remote sensing techniques have been applied to assess the spatial distribution of most superficial algal flora, water temperature as well as the key environmental and morphological changes of the lagoon since the beginning of the 1970s.

A radio and optical study of Molonglo radio sources

Science.gov (United States)

Ishwara-Chandra, C. H.; Saikia, D. J.; McCarthy, P. J.; van Breugel, W. J. M.

2001-05-01

We present multi-wavelength radio observations with the Very Large Array, and narrow- and broad-band optical observations with the 2.5-m telescope at the Las Campanas Observatory, of a well-defined sample of high-luminosity Fanaroff-Riley class II radio galaxies and quasars, selected from the Molonglo Reference Catalogue 1-Jy sample. These observations were carried out as part of a programme to investigate the effects of orientation and environment on some of the observed properties of these sources. We examine the dependence of the Liu-Pooley relationship, which shows that radio lobes with flatter radio spectra are less depolarized, on size, identification and redshift, and show that it is significantly stronger for smaller sources, with the strength of the relationship being similar for both radio galaxies and quasars. In addition to Doppler effects, there appear to be intrinsic differences between the lobes on opposite sides. We discuss the asymmetry in brightness and location of the hotspots, and present estimates of the ages and velocities from matched-resolution observations in the L and C bands. Narrow- and broad-band optical images of some of these sources were made to study their environments and correlate with the symmetry parameters. An extended emission-line region is seen in a quasar, and in four of the objects possible companion galaxies are seen close to the radio axis.

Quantifying time in sedimentary successions by radio-isotopic dating of ash beds

Science.gov (United States)

Schaltegger, Urs

2014-05-01

Sedimentary rock sequences are an accurate record of geological, chemical and biological processes throughout the history of our planet. If we want to know more about the duration or the rates of some of these processes, we can apply methods of absolute age determination, i.e. of radio-isotopic dating. Data of highest precision and accuracy, and therefore of highest degree of confidence, are obtained by chemical abrasion, isotope-dilution, thermal ionization mass spectrometry (CA-ID-TIMS) 238U-206Pb dating techniques, applied to magmatic zircon from ash beds that are interbedded with the sediments. This techniques allows high-precision estimates of age at the 0.1% uncertainty for single analyses, and down to 0.03% uncertainty for groups of statistically equivalent 206Pb/238U dates. Such high precision is needed, since we would like the precision to be approximately equivalent or better than the (interpolated) duration of ammonoid zones in the Mesozoic (e.g., Ovtcharova et al. 2006), or to match short feedback rates of biological, climatic, or geochemical cycles after giant volcanic eruptions in large igneous provinces (LIP's), e.g., at the Permian/Triassic or the Triassic/Jurassic boundaries. We also wish to establish as precisely as possible temporal coincidence between the sedimentary record and short-lived volcanic events within the LIP's. Precision and accuracy of the U-Pb data has to be traceable and quantifiable in absolute terms, achieved by direct reference to the international kilogram, via an absolute calibration of the standard and isotopic tracer solutions. Only with a perfect control on precision and accuracy of radio-isotopic data, we can confidently determine whether two ages of geological events are really different, and avoid mistaking interlaboratory or interchronometer biases for age difference. The development of unprecedented precision of CA-ID-TIMS 238U-206Pb dates led to the recognition of protracted growth of zircon in a magmatic liquid (see

Laser Isotope Enrichment for Medical and Industrial Applications

Energy Technology Data Exchange (ETDEWEB)

Leonard Bond

2006-07-01

Laser Isotope Enrichment for Medical and Industrial Applications by Jeff Eerkens (University of Missouri), Jay Kunze (Idaho State University), and Leonard Bond (Idaho National Laboratory) The principal isotope enrichment business in the world is the enrichment of uranium for commercial power reactor fuels. However, there are a number of other needs for separated isotopes. Some examples are: 1) Pure isotopic targets for irradiation to produce medical radioisotopes. 2) Pure isotopes for semiconductors. 3) Low neutron capture isotopes for various uses in nuclear reactors. 4) Isotopes for industrial tracer/identification applications. Examples of interest to medicine are targets to produce radio-isotopes such as S-33, Mo-98, Mo-100, W-186, Sn-112; while for MRI diagnostics, the non-radioactive Xe-129 isotope is wanted. For super-semiconductor applications some desired industrial isotopes are Si-28, Ga-69, Ge-74, Se-80, Te-128, etc. An example of a low cross section isotope for use in reactors is Zn-68 as a corrosion inhibitor material in nuclear reactor primary systems. Neutron activation of Ar isotopes is of interest in industrial tracer and diagnostic applications (e.g. oil-logging). . In the past few years there has been a sufficient supply of isotopes in common demand, because of huge Russian stockpiles produced with old electromagnetic and centrifuge separators previously used for uranium enrichment. Production of specialized isotopes in the USA has been largely accomplished using old ”calutrons” (electromagnetic separators) at Oak Ridge National Laboratory. These methods of separating isotopes are rather energy inefficient. Use of lasers for isotope separation has been considered for many decades. None of the proposed methods have attained sufficient proof of principal status to be economically attractive to pursue commercially. Some of the authors have succeeded in separating sulfur isotopes using a rather new and different method, known as condensation

Laser Isotope Enrichment for Medical and Industrial Applications

International Nuclear Information System (INIS)

Leonard Bond

2006-01-01

Laser Isotope Enrichment for Medical and Industrial Applications by Jeff Eerkens (University of Missouri), Jay Kunze (Idaho State University), and Leonard Bond (Idaho National Laboratory) The principal isotope enrichment business in the world is the enrichment of uranium for commercial power reactor fuels. However, there are a number of other needs for separated isotopes. Some examples are: (1) Pure isotopic targets for irradiation to produce medical radioisotopes. (2) Pure isotopes for semiconductors. (3) Low neutron capture isotopes for various uses in nuclear reactors. (4) Isotopes for industrial tracer/identification applications. Examples of interest to medicine are targets to produce radio-isotopes such as S-33, Mo-98, Mo-100, W-186, Sn-112; while for MRI diagnostics, the non-radioactive Xe-129 isotope is wanted. For super-semiconductor applications some desired industrial isotopes are Si-28, Ga-69, Ge-74, Se-80, Te-128, etc. An example of a low cross section isotope for use in reactors is Zn-68 as a corrosion inhibitor material in nuclear reactor primary systems. Neutron activation of Ar isotopes is of interest in industrial tracer and diagnostic applications (e.g. oil-logging). . In the past few years there has been a sufficient supply of isotopes in common demand, because of huge Russian stockpiles produced with old electromagnetic and centrifuge separators previously used for uranium enrichment. Production of specialized isotopes in the USA has been largely accomplished using old ''calutrons'' (electromagnetic separators) at Oak Ridge National Laboratory. These methods of separating isotopes are rather energy inefficient. Use of lasers for isotope separation has been considered for many decades. None of the proposed methods have attained sufficient proof of principal status to be economically attractive to pursue commercially. Some of the authors have succeeded in separating sulfur isotopes using a rather new and different method, known as condensation

Applications for radio-frequency identification technology in the perioperative setting.

Science.gov (United States)

Zhao, Tiyu; Zhang, Xiaoxiang; Zeng, Lili; Xia, Shuyan; Hinton, Antentor Othrell; Li, Xiuyun

2014-06-01

We implemented a two-year project to develop a security-gated management system for the perioperative setting using radio-frequency identification (RFID) technology to enhance the management efficiency of the OR. We installed RFID readers beside the entrances to the OR and changing areas to receive and process signals from the RFID tags that we sewed into surgical scrub attire and shoes. The system also required integrating automatic access control panels, computerized lockers, light-emitting diode (LED) information screens, wireless networks, and an information system. By doing this, we are able to control the flow of personnel and materials more effectively, reduce OR costs, optimize the registration and attire-changing process for personnel, and improve management efficiency. We also anticipate this system will improve patient safety by reducing the risk of surgical site infection. Application of security-gated management systems is an important and effective way to help ensure a clean, convenient, and safe management process to manage costs in the perioperative area and promote patient safety. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Radio Frequency Identification (RFID technology and patient safety

Directory of Open Access Journals (Sweden)

Sima Ajami

2013-01-01

Full Text Available Background: Radio frequency identification (RFID systems have been successfully applied in areas of manufacturing, supply chain, agriculture, transportation, healthcare, and services to name a few. However, the different advantages and disadvantages expressed in various studies of the challenges facing the technology of the use of the RFID technology have been met with skepticism by managers of healthcare organizations. The aim of this study was to express and display the role of RFID technology in improving patient safety and increasing the impact of it in healthcare. Materials and Methods: This study was non-systematical review, which the literature search was conducted with the help of libraries, books, conference proceedings, PubMed databases and also search engines available at Google, Google scholar in which published between 2004 and 2013 during Febuary 2013. We employed the following keywords and their combinations; RFID, healthcare, patient safety, medical errors, and medication errors in the searching areas of title, keywords, abstract, and full text. Results: The preliminary search resulted in 68 articles. After a careful analysis of the content of each paper, a total of 33 papers was selected based on their relevancy. Conclusion: We should integrate RFID with hospital information systems (HIS and electronic health records (EHRs and support it by clinical decision support systems (CDSS, it facilitates processes and reduce medical, medication and diagnosis errors.

Radio Frequency Identification (RFID) technology and patient safety

Science.gov (United States)

Ajami, Sima; Rajabzadeh, Ahmad

2013-01-01

Background: Radio frequency identification (RFID) systems have been successfully applied in areas of manufacturing, supply chain, agriculture, transportation, healthcare, and services to name a few. However, the different advantages and disadvantages expressed in various studies of the challenges facing the technology of the use of the RFID technology have been met with skepticism by managers of healthcare organizations. The aim of this study was to express and display the role of RFID technology in improving patient safety and increasing the impact of it in healthcare. Materials and Methods: This study was non-systematical review, which the literature search was conducted with the help of libraries, books, conference proceedings, PubMed databases and also search engines available at Google, Google scholar in which published between 2004 and 2013 during Febuary 2013. We employed the following keywords and their combinations; RFID, healthcare, patient safety, medical errors, and medication errors in the searching areas of title, keywords, abstract, and full text. Results: The preliminary search resulted in 68 articles. After a careful analysis of the content of each paper, a total of 33 papers was selected based on their relevancy. Conclusion: We should integrate RFID with hospital information systems (HIS) and electronic health records (EHRs) and support it by clinical decision support systems (CDSS), it facilitates processes and reduce medical, medication and diagnosis errors. PMID:24381626

Compact printed two dipole array antenna with a high front-back ratio for ultra-high-frequency radio-frequency identification handheld reader applications

DEFF Research Database (Denmark)

Liu, Qi; Zhang, Shuai; He, Sailing

2015-01-01

A printed two-dipole array antenna with a high front-back ratio is proposed for ultra-high-frequency (UHF) radio-frequency identification handheld readers. The proposed antenna is a parasitic dual-element array with the ends of both elements folded back towards each other for additional coupling....

Realization and Measurement of a Wearable Radio Frequency Identification Tag Antenna

Directory of Open Access Journals (Sweden)

Shudao ZHOU

2014-06-01

Full Text Available The realization and measurements of a wearable Radio Frequency Identification tag antenna which achieves good simulation results in the Ultimate High Frequency band under the standard of the United States in design procedures is presented. The wearable tag antenna is constructed using a flexible substrate, on whose surface the antenna patch is adhered. A bowtie shape is chosen as the geometry of the antenna patch because of its large bandwidth that brings to the tag and its simple structure. The substrate of the tag antenna is realized using a foam material while the patch on the substrate surface is cut out from copper foil tape. Then, the impedance of the realized tag antenna is extracted from S parameters which are measured with a vector network analyzer with a coaxial fixture. Finally, the radiation pattern of the tag is characterized by normalized reading distances of different directions of the antenna integrated with a microchip, thus indicating the validity of the realized tag antenna.

Roll-to-Roll Screen Printed Radio Frequency Identification Transponder Antennas for Vehicle Tracking Systems

Science.gov (United States)

Zichner, Ralf; Baumann, Reinhard R.

2013-05-01

Vehicle tracking systems based on ultra high frequency (UHF) radio frequency identification (RFID) technology are already introduced to control the access to car parks and corporate premises. For this field of application so-called Windshield RFID transponder labels are used, which are applied to the inside of the windshield. State of the art for manufacturing these transponder antennas is the traditional lithography/etching approach. Furthermore the performance of these transponders is limited to a reading distance of approximately 5 m which results in car speed limit of 5 km/h for identification. However, to achieve improved performance compared to existing all-purpose transponders and a dramatic cost reduction, an optimized antenna design is needed which takes into account the special dielectric and in particular metallic car environment of the tag and an roll-to-roll (R2R) printing manufacturing process. In this paper we focus on the development of a customized UHF RFID transponder antenna design, which is adopted for vehicle geometry as well as R2R screen printing manufacturing processes.

Tomographic, hydrochemical and isotopic investigations of the ...

Indian Academy of Sciences (India)

2Department of Geography, Laboratory of Radio-Analyses and Environment, BP 1168, ... addition, hydrochemical and isotopic data were examined to determine the main factors and mecha- .... Previous hydrogeologic studies identified lentic-.

Possible identification of quarks with leptons in Lie-isotopic SU(3) theory

International Nuclear Information System (INIS)

Animalu, A.O.E.

1984-01-01

A possible identification of the six quarks (d,s,c;u,t,b) with the corresponding leptons (e - ,μ - ,tau - ;v/sub e/,v/sub μ/,v/sub tau/) is attempted via the corrspondence principle, dapprox.(uv-bar/sub e/)e - , sapprox.(tv-bar/sub μ/)μ - , c(bv-bar/sub t/)t - ,uapprox.(uv/sub e/) v/sub e/,..., and its inverse, which are formally represented by a non-unitary integral transformation (with kernel P) and its inverse or dual (with kernel Q), connecting the quark and lepton fields. It is shown that PQ and QP may be interpreted as hadronic and leptonic density matrix operators which obey the quantum mechanical analog of the Liouville equation of conservation from which a Lie-isotopic generalization of Heisenberg's equation of motion is abstracted. P and Q form iso-canonically conjugate dynamical veriables, i.e., Q is the isotpic element for the isoassociative product H*Q = HPQ in the equation of motion for Q. It is also shown that PQ and QP, being idempotent operators, have eigenvalues 0 or 1, which imply that both P and Q can be singular, leading to a further differentiation of ''hadronic mechanics'' into the conventional ''isotopic'' theory in which the isotopic element (g) in the isoassociative product A*B = AgB is non-singular and Hermitian, and a new ''homotopic'' theory in which g is singular and non-Hermitian A Lie-admissible generalization is also obained, and SU(2)-spin realizations are indicated

New Isotope Analysis Method: Atom Trap Mass Spectrometry

International Nuclear Information System (INIS)

Ko, Kwang Hoon; Park, Hyun Min; Han, Jae Min; Kim, Taek Soo; Cha, Yong Ho; Lim, Gwon; Jeong, Do Young

2011-01-01

Trace isotope analysis has been an important role in science, archaeological dating, geology, biology and nuclear industry. Some fission products such as Sr-90, Cs-135 and Kr-85 can be released to the environment when nuclear accident occurs and the reprocessing factory operates. Thus, the analysis of artificially produced radioactive isotopes has been of interest in nuclear industry. But it is difficult to detect them due to low natural abundance less then 10 -10 . In general, radio-chemical method has been applied to detect ultra-trace radio isotopes. But this method has disadvantages of long measurement time for long lived radioisotopes and toxic chemical process for the purification. The Accelerator Mass Spectrometer has high isotope selectivity, but the system is huge and its selectivity is affected by isobars. The laser based method, such as RIMS (Resonance Ionization Mass Spectrometry) has the advantage of isobar-effect free characteristics. But the system size is still huge for high isotope selective system. Recently, ATTA (Atom Trap Trace Analysis) has been successfully applied to detect ultra-trace isotope, Kr-81 and Kr-85. ATTA is the isobar-effect free detection with high isotope selectivity and the system size is small. However, it requires steady atomic beam source during detection, and is not allowed simultaneous detection of several isotopes. In this presentation, we introduce new isotope detection method which is a coupled method of Atom Trap Mass Spectrometry (ATMS). We expect that it can overcome the disadvantage of ATTA while it has both advantages of ATTA and mass spectrometer. The basic concept and the system design will be presented. In addition, the experimental status of ATMS will also be presented

Measuring the drinking behaviour of individual pigs housed in group using radio frequency identification (RFID).

Science.gov (United States)

Maselyne, J; Adriaens, I; Huybrechts, T; De Ketelaere, B; Millet, S; Vangeyte, J; Van Nuffel, A; Saeys, W

2016-09-01

Changes in the drinking behaviour of pigs may indicate health, welfare or productivity problems. Automated monitoring and analysis of drinking behaviour could allow problems to be detected, thus improving farm productivity. A high frequency radio frequency identification (HF RFID) system was designed to register the drinking behaviour of individual pigs. HF RFID antennas were placed around four nipple drinkers and connected to a reader via a multiplexer. A total of 55 growing-finishing pigs were fitted with radio frequency identification (RFID) ear tags, one in each ear. RFID-based drinking visits were created from the RFID registrations using a bout criterion and a minimum and maximum duration criterion. The HF RFID system was successfully validated by comparing RFID-based visits with visual observations and flow meter measurements based on visit overlap. Sensitivity was at least 92%, specificity 93%, precision 90% and accuracy 93%. RFID-based drinking duration had a high correlation with observed drinking duration (R 2=0.88) and water usage (R 2=0.71). The number of registrations after applying the visit criteria had an even higher correlation with the same two variables (R 2=0.90 and 0.75, respectively). There was also a correlation between number of RFID visits and number of observed visits (R 2=0.84). The system provides good quality information about the drinking behaviour of individual pigs. As health or other problems affect the pigs' drinking behaviour, analysis of the RFID data could allow problems to be detected and signalled to the farmer. This information can help to improve the productivity and economics of the farm as well as the health and welfare of the pigs.

Development of corrosion condition sensing and monitoring system using radio-frequency identification devices (RFID) : progress report 2

Energy Technology Data Exchange (ETDEWEB)

Gu, G.P.; Li, J.; Liu, P.; Bibby, D.; Zheng, W.; Lo, J. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Materials Technology Laboratory

2008-12-15

The development of a corrosion severity monitoring system that used radio-frequency identification device (RIFD) technology was discussed. A corrosion monitoring sensor was integrated with a tag modified to partially block the radio frequency signal. The metallic coating caused a frequency shift of the device's reader antenna in order to allow for the accurate characterization of metal coatings. Communications between the tag and the reader were re-established as the corrosion process gradually deteriorated the coating. The method was tested experimentally with 3 RFID systems using both active and passive tags were assembled. A passive tag was covered in aluminum foil. Results of the experiment showed that the metallic coating interfered with RFID signals. A cold-spray technology was used to coat tags with metal alloys. The surface morphology of the coatings was tested to determine optimum coating parameters. Further studies are being conducted to develop software for the technology. 4 refs., 11 figs.

Zero-Power Radio Device.

Energy Technology Data Exchange (ETDEWEB)

Brocato, Robert W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-02-01

This report describes an unpowered radio receiver capable of detecting and responding to weak signals transmit ted from comparatively long distances . This radio receiver offers key advantages over a short range zero - power radio receiver previously described in SAND2004 - 4610, A Zero - Power Radio Receiver . The device described here can be fabricated as an integrated circuit for use in portable wireless devices, as a wake - up circuit, or a s a stand - alone receiver operating in conjunction with identification decoders or other electroni cs. It builds on key sub - components developed at Sandia National Laboratories over many years. It uses surface acoustic wave (SAW) filter technology. It uses custom component design to enable the efficient use of small aperture antennas. This device uses a key component, the pyroelectric demodulator , covered by Sandia owned U.S. Patent 7397301, Pyroelectric Demodulating Detector [1] . This device is also described in Sandia owned U.S. Patent 97266446, Zero Power Receiver [2].

Design and Development of a Clinical Risk Management Tool Using Radio Frequency Identification (RFID).

Science.gov (United States)

Pourasghar, Faramarz; Tabrizi, Jafar Sadegh; Yarifard, Khadijeh

2016-04-01

Patient safety is one of the most important elements of quality of healthcare. It means preventing any harm to the patients during medical care process. This paper introduces a cost-effective tool in which the Radio Frequency Identification (RFID) technology is used to identify medical errors in hospital. The proposed clinical error management system (CEMS) is consisted of a reader device, a transfer/receiver device, a database and managing software. The reader device works using radio waves and is wireless. The reader sends and receives data to/from the database via the transfer/receiver device which is connected to the computer via USB port. The database contains data about patients' medication orders. The CEMS has the ability to identify the clinical errors before they occur and then warns the care-giver with voice and visual messages to prevent the error. This device reduces the errors and thus improves the patient safety. A new tool including software and hardware was developed in this study. Application of this tool in clinical settings can help the nurses prevent medical errors. It can also be a useful tool for clinical risk management. Using this device can improve the patient safety to a considerable extent and thus improve the quality of healthcare.

Decommissioning of the nuclear facilities-radio-isotope thermo-electrical generators in the Republic of Tajikistan

International Nuclear Information System (INIS)

Mirsaidov, U.; Kamalov, D.

2010-01-01

One of peaceful uses of the nuclear energy is the production of electrical energy by using the phenomenon of fission of radioactive strontium in the radio-isotope thermo-electrical generators (RITEGs) to supply with energy lighthouses, radio-lighthouses and radio meteorological stations. They are installed in the remote territories far from the people’s dwellings and do not require presence of the personnel to maintain them. Republic of Tajikistan as other republics of the ex-Soviet Union used the radio isotope thermo- electrical generators (RITEGs) as sources for autonomous hydro- and meteorological navigational equipment, which was placed in the hard-to-reach mountainous regions. In the ex-Soviet Union, the RITEGs were under constant surveillance. But, after the breakup of the Soviet Union, hundreds of these small devices equipped with powerful sources of radiation remained out of control. Radioactive substance contained in them may be easily used as a source of radiation dispersion. By applying Strontium-90 as a material for a bomb one can disperse this radioactive substance after exploding the bomb. Having exploded one of such “dirty bombs” a terrorist may contaminate several cities by the radioactive materials. It was determined that there are around 1 000 RITEGs on the territory of the Russian Federation and approximately 30- on the territory of other states. It is presumed that approximately 1500 RITEGs were manufactured in the USSR. The exploitation period of all the RITEGs is around 10 years. At present, all the RITEGs which were in circulation have finalized their functionality period and should be withdrawn from the utilization. In Tajikistan, Tajikhydromet is the user of the RITEGs. The manufacturer of the RITEGs, according to the documentation, was the All-Russian Institute of Technological Physics and Automation in Moscow. The documents were sent to the plant-producer. According to the unofficial sources, during the times of the Soviet Union 15

Rule Based System for Medicine Inventory Control Using Radio Frequency Identification (RFID

Directory of Open Access Journals (Sweden)

Ardhyanti Mita Nugraha Joanna

2018-01-01

Full Text Available Rule based system is very efficient to ensure stock of drug to remain available by utilizing Radio Frequency Identification (RFID as input means automatically. This method can ensure the stock of drugs to remain available by analyzing the needs of drug users. The research data was the amount of drug usage in hospital for 1 year. The data was processed by using ABC classification to determine the drug with fast, medium and slow movement. In each classification result, rule based algorithm was given for determination of safety stock and Reorder Point (ROP. This research yielded safety stock and ROP values that vary depending on the class of each drug. Validation is done by comparing the calculation of safety stock and reorder point both manually and by system, then, it was found that the mean deviation value at safety stock was 0,03 and and ROP was 0,08.

Rule Based System for Medicine Inventory Control Using Radio Frequency Identification (RFID)

Science.gov (United States)

Nugraha, Joanna Ardhyanti Mita; Suryono; Suseno, dan Jatmiko Endro

2018-02-01

Rule based system is very efficient to ensure stock of drug to remain available by utilizing Radio Frequency Identification (RFID) as input means automatically. This method can ensure the stock of drugs to remain available by analyzing the needs of drug users. The research data was the amount of drug usage in hospital for 1 year. The data was processed by using ABC classification to determine the drug with fast, medium and slow movement. In each classification result, rule based algorithm was given for determination of safety stock and Reorder Point (ROP). This research yielded safety stock and ROP values that vary depending on the class of each drug. Validation is done by comparing the calculation of safety stock and reorder point both manually and by system, then, it was found that the mean deviation value at safety stock was 0,03 and and ROP was 0,08.

Isotopic distribution of the projectile-like products in the reaction 36Ar + 124Sn at 35 MeV/u

International Nuclear Information System (INIS)

Xiao Zhigang; Jin Genming; Wu Heyu; Hu Rongjiang; Wang Hongwei; Li Zuyu; Duan Limin; Wang Sufang; Wei Zhiyong; Zhang Baoguo; Liu Jianye; Zhu Yongtai

2003-01-01

The projectile-like products at 5.3 degree in the reaction 35 MeV/u 36 Ar + 124 Sn were inclusively measured with good isotopic identification. With increasing kinetic energy, the average N/Z ratio of the products gradually decreases, approaching to that of the projectile. It is shown from the isospin dependent quantum mechanics (IQMD) that with the increasing of reaction time, the average kinetic energy of the projectile-like products decreases, while the N/Z ratio increases gradually. Moreover, the isotropic composition is obviously dependent on the impact parameter, and the N/Z radio is becoming smaller with increasing collision centrality

Uptake and retention of radio-caesium in earthworms cultured in soil contaminated by the Fukushima nuclear power plant accident

International Nuclear Information System (INIS)

Fujiwara, K.; Takahashi, T.; Nguyen, P.; Kubota, Y.; Gamou, S.; Sakurai, S.; Takahashi, S.

2015-01-01

To understand the effects of radionuclides on non-human biota and the environment, it is essential to study the intake and metabolism of radio-isotopes in earthworms which are among the most important soil organisms, and Eisenia fetida, which were used in this study, are known to be sufficiently sensitive to chemicals and representative of common earthworms. In this study, we assessed the concentration ratios, uptake and retention, absorbed dose rate, and distribution of radio-caesium in earthworms. The concentration ratios of 137 Cs (i.e., the concentrations of radio-caesium in earthworms relative to those in dry soil) were higher early in the culturing period and decreased gradually over the experimental period. 137 Cs taken up by E. fetida was cleared rapidly after the worms were cultured in radio-caesium-free soil, suggesting that the metabolism of radio-caesium in earthworms is very rapid. Autoradiography demonstrated that the concentration of radio-caesium within the digestive tract was as high as that in the soil, while radio-caesium in the body tissue was lower than radio-caesium in the soil and was almost uniformly distributed among earthworm tissues. The highest absorbed dose rate of total exposure to radio-caesium ( 137 Cs + 134 Cs) was calculated to be 1.9 × 10 3 (μGy/day) in the earthworms. - Highlights: • We assessed the concentration ratios of 137 Cs in earthworms/dry soil. • The distribution of radio-caesium was relatively uniform throughout the earthworm body without any distinguishable accumulation in specific organs or tissues. • We estimated the absorbed dose rate of radio-caesium for earthworms

Identification of volatile and semivolatile compounds in chemical ionization GC-MS using a mass-to-structure (MTS) Search Engine with integral isotope pattern ranking.

Science.gov (United States)

Liao, Wenta; Draper, William M

2013-02-21

The mass-to-structure or MTS Search Engine is an Access 2010 database containing theoretical molecular mass information for 19,438 compounds assembled from common sources such as the Merck Index, pesticide and pharmaceutical compilations, and chemical catalogues. This database, which contains no experimental mass spectral data, was developed as an aid to identification of compounds in atmospheric pressure ionization (API)-LC-MS. This paper describes a powerful upgrade to this database, a fully integrated utility for filtering or ranking candidates based on isotope ratios and patterns. The new MTS Search Engine is applied here to the identification of volatile and semivolatile compounds including pesticides, nitrosoamines and other pollutants. Methane and isobutane chemical ionization (CI) GC-MS spectra were obtained from unit mass resolution mass spectrometers to determine MH(+) masses and isotope ratios. Isotopes were measured accurately with errors of Search Engine and details performance testing with over 50 model compounds.

Identification of milk origin and process-induced changes in milk by stable isotope ratio mass spectrometry.

Science.gov (United States)

Scampicchio, Matteo; Mimmo, Tanja; Capici, Calogero; Huck, Christian; Innocente, Nadia; Drusch, Stephan; Cesco, Stefano

2012-11-14

Stable isotope values were used to develop a new analytical approach enabling the simultaneous identification of milk samples either processed with different heating regimens or from different geographical origins. The samples consisted of raw, pasteurized (HTST), and ultrapasteurized (UHT) milk from different Italian origins. The approach consisted of the analysis of the isotope ratio of δ¹³C and δ¹⁵N for the milk samples and their fractions (fat, casein, and whey). The main finding of this work is that as the heat processing affects the composition of the milk fractions, changes in δ¹³C and δ¹⁵N were also observed. These changes were used as markers to develop pattern recognition maps based on principal component analysis and supervised classification models, such as linear discriminant analysis (LDA), multivariate regression (MLR), principal component regression (PCR), and partial least-squares (PLS). The results give proof of the concept that isotope ratio mass spectroscopy can discriminate simultaneously between milk samples according to their geographical origin and type of processing.

CARBOHYDRATE USE AND ASSIMILATION BY LITTER AND SOIL FUNGI ASSESSED BY CARBON ISOTOPES AND BIOLOG ASSAYS

Science.gov (United States)

Soil fungi are integral to decomposition in forests, yet identification of probable functional roles of different taxa is problematic. Here, we compared carbohydrate assimilation patterns derived from stable isotope analyses on cultures with those produced from cultures on Biolo...

A METHOD TO IMPROVE DOSE ASSESSMENT BY RECONSTRUCTION OF THE COMPLETE ISOTOPES INVENTORY.

Science.gov (United States)

Bonin, Alice; Tsilanizara, Aimé

2017-06-01

Radiation shielding assessments may underestimate the expected dose if some isotopes at trace level are not considered in the isotopes inventory of the shielded radioactive materials. Indeed, information about traces is not often available. Nevertheless, the activation of some minor isotopic traces may significantly contribute to the dose build-up. This paper presents a new method (Isotopes Inventory Reconstruction-IIR) estimating the concentration of the minor isotopes in the irradiated material at the beginning of the cooling period. The method requires the solution of the inverse problem describing the irradiated material's decay. In a mixture of an irradiated uranium-plutonium oxide shielded by a set-up made of stainless-steel, porous polyethylene plaster and lead methyl methacrylate, the comparison between different methods proves that the IIR-method allows better assessment of the dose than other approximate methods. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

X-ray Counterparts of Infrared Faint Radio Sources

Science.gov (United States)

Schartel, Norbert

2011-10-01

Infrared Faint Radio Sources (IFRS) are radio sources with extremely faint or even absent infrared emission in deep Spitzer Surveys. Models of their spectral energy distributions, the ratios of radio to infrared flux densities and their steep radio spectra strongly suggest that IFRS are AGN at high redshifts (2IFRS, but if confirmed, the increased AGN numbers at these redshifts will account for the unresolved part of the X-ray background. The identification of X-ray counterparts of IFRS is considered to be the smoking gun for this hypothesis. We propose to observe 8 IFRS using 30ks pointed observations. X-ray detections of IFRS with different ratios of radio-to-infrared fluxes, will constrain the class-specific SED.

Insights from quantitative metaproteomics and protein-stable isotope probing into microbial ecology.

Science.gov (United States)

von Bergen, Martin; Jehmlich, Nico; Taubert, Martin; Vogt, Carsten; Bastida, Felipe; Herbst, Florian-Alexander; Schmidt, Frank; Richnow, Hans-Hermann; Seifert, Jana

2013-10-01

The recent development of metaproteomics has enabled the direct identification and quantification of expressed proteins from microbial communities in situ, without the need for microbial enrichment. This became possible by (1) significant increases in quality and quantity of metagenome data and by improvements of (2) accuracy and (3) sensitivity of modern mass spectrometers (MS). The identification of physiologically relevant enzymes can help to understand the role of specific species within a community or an ecological niche. Beside identification, relative and absolute quantitation is also crucial. We will review label-free and label-based methods of quantitation in MS-based proteome analysis and the contribution of quantitative proteome data to microbial ecology. Additionally, approaches of protein-based stable isotope probing (protein-SIP) for deciphering community structures are reviewed. Information on the species-specific metabolic activity can be obtained when substrates or nutrients are labeled with stable isotopes in a protein-SIP approach. The stable isotopes ((13)C, (15)N, (36)S) are incorporated into proteins and the rate of incorporation can be used for assessing the metabolic activity of the corresponding species. We will focus on the relevance of the metabolic and phylogenetic information retrieved with protein-SIP studies and for detecting and quantifying the carbon flux within microbial consortia. Furthermore, the combination of protein-SIP with established tools in microbial ecology such as other stable isotope probing techniques are discussed.

RADIO FREQUENCY IDENTIFICATION DEVICES: EFFECTIVENESS IN IMPROVING SAFEGUARDS AT GAS-CENTRIFUGE URANIUM-ENRICHMENT PLANTS

International Nuclear Information System (INIS)

JOE, J.

2007-01-01

Recent advances in radio frequency identification devices (RFIDs) have engendered a growing interest among international safeguards experts. Potentially, RFIDs could reduce inspection work, viz. the number of inspections, number of samples, and duration of the visits, and thus improve the efficiency and effectiveness of international safeguards. This study systematically examined the applications of RFIDs for IAEA safeguards at large gas-centrifuge enrichment plants (GCEPs). These analyses are expected to help identify the requirements and desirable properties for RFIDs, to provide insights into which vulnerabilities matter most, and help formulate the required assurance tests. This work, specifically assesses the application of RFIDs for the ''Option 4'' safeguards approach, proposed by Bruce Moran, U. S. Nuclear Regulatory Commission (NRC), for large gas-centrifuge uranium-enrichment plants. The features of ''Option 4'' safeguards include placing RFIDs on all feed, product and tails (F/P/T) cylinders, along with WID readers in all FP/T stations and accountability scales. Other features of Moran's ''Option 4'' are Mailbox declarations, monitoring of load-cell-based weighing systems at the F/P/T stations and accountability scales, and continuous enrichment monitors. Relevant diversion paths were explored to evaluate how RFIDs improve the efficiency and effectiveness of safeguards. Additionally, the analysis addresses the use of RFIDs in conjunction with video monitoring and neutron detectors in a perimeter-monitoring approach to show that RFIDs can help to detect unidentified cylinders

Application of heavy stable isotopes in forensic isotope geochemistry: A review

International Nuclear Information System (INIS)

Aggarwal, Jugdeep; Habicht-Mauche, Judith; Juarez, Chelsey

2008-01-01

Light stable isotopes have been used for many years to characterize the source and transport of materials. More recently heavy isotope systems such as Sr, Nd and Pb have been added to this list in order to aid source identification. With the advent of multiple collector ICP-MS, the range of isotopic tools now available has increased considerably, however, until the isotope systematics of these new non-traditional isotope systems have become better understood, they will not be as useful in characterizing material source and transportation. Applications using heavy metal stable isotopes (mostly traditional heavy isotopes) have reached most avenues in science, including earth sciences, archaeology, anthropology, animal physiology, ecology and toxicology. This field will continue to grow as new applications are developed and techniques become simpler and quicker. This paper provides a review of how this field has grown and presents two new applications using Pb and Sr isotopes in glazes to determine the source of ore used in glazes, and using Sr isotopes to determine the origin of undocumented deceased Mexican border crossers

Application of heavy stable isotopes in forensic isotope geochemistry: A review

Energy Technology Data Exchange (ETDEWEB)

Aggarwal, Jugdeep [W.M. Keck Isotope Laboratory, Department of Earth Sciences, University of California, Santa Cruz, CA 95064 (United States)], E-mail: jaggarwal@pmc.ucsc.edu; Habicht-Mauche, Judith; Juarez, Chelsey [Department of Anthropology, University of California, Santa Cruz, CA 95064 (United States)

2008-09-15

Light stable isotopes have been used for many years to characterize the source and transport of materials. More recently heavy isotope systems such as Sr, Nd and Pb have been added to this list in order to aid source identification. With the advent of multiple collector ICP-MS, the range of isotopic tools now available has increased considerably, however, until the isotope systematics of these new non-traditional isotope systems have become better understood, they will not be as useful in characterizing material source and transportation. Applications using heavy metal stable isotopes (mostly traditional heavy isotopes) have reached most avenues in science, including earth sciences, archaeology, anthropology, animal physiology, ecology and toxicology. This field will continue to grow as new applications are developed and techniques become simpler and quicker. This paper provides a review of how this field has grown and presents two new applications using Pb and Sr isotopes in glazes to determine the source of ore used in glazes, and using Sr isotopes to determine the origin of undocumented deceased Mexican border crossers.

Enhanced forensic discrimination of pollutants by position-specific isotope analysis using isotope ratio monitoring by (13)C nuclear magnetic resonance spectrometry.

Science.gov (United States)

Julien, Maxime; Nun, Pierrick; Höhener, Patrick; Parinet, Julien; Robins, Richard J; Remaud, Gérald S

2016-01-15

In forensic environmental investigations the main issue concerns the inference of the original source of the pollutant for determining the liable party. Isotope measurements in geochemistry, combined with complimentary techniques for contaminant identification, have contributed significantly to source determination at polluted sites. In this work we have determined the intramolecular (13)C profiles of several molecules well-known as pollutants. By giving additional analytical parameters, position-specific isotope analysis performed by isotope ratio monitoring by (13)C nuclear magnetic resonance (irm-(13)C NMR) spectrometry gives new information to help in answering the major question: what is the origin of the detected contaminant? We have shown that isotope profiling of the core of a molecule reveals both the raw materials and the process used in its manufacture. It also can reveal processes occurring between the contamination site 'source' and the sampling site. Thus, irm-(13)C NMR is shown to be a very good complement to compound-specific isotope analysis currently performed by mass spectrometry for assessing polluted sites involving substantial spills of pollutant. Copyright © 2015 Elsevier B.V. All rights reserved.

Identification of Potential Hazard using Hazard Identification and Risk Assessment

Science.gov (United States)

Sari, R. M.; Syahputri, K.; Rizkya, I.; Siregar, I.

2017-03-01

This research was conducted in the paper production’s company. These Paper products will be used as a cigarette paper. Along in the production’s process, Company provides the machines and equipment that operated by workers. During the operations, all workers may potentially injured. It known as a potential hazard. Hazard identification and risk assessment is one part of a safety and health program in the stage of risk management. This is very important as part of efforts to prevent occupational injuries and diseases resulting from work. This research is experiencing a problem that is not the identification of potential hazards and risks that would be faced by workers during the running production process. The purpose of this study was to identify the potential hazards by using hazard identification and risk assessment methods. Risk assessment is done using severity criteria and the probability of an accident. According to the research there are 23 potential hazard that occurs with varying severity and probability. Then made the determination Risk Assessment Code (RAC) for each potential hazard, and gained 3 extreme risks, 10 high risks, 6 medium risks and 3 low risks. We have successfully identified potential hazard using RAC.

Modeling and Analysis of Surgery Patient Identification Using RFID

OpenAIRE

Byungho Jeong; Chen-Yang Cheng; Vittal Prabhu

2009-01-01

This article proposes a workflow and reliability model for surgery patient identification using RFID (Radio Frequency Identification). Certain types of mistakes may be prevented by automatically identifying the patient before surgery. The proposed workflow is designed to ensure that both the correct site and patient are engaged in the surgical process. The reliability model can be used to assess improvements in patients’ safety during this process. A proof-of-concept system is developed to ...

Assessment of occupational exposure to radio frequency electromagnetic fields

Directory of Open Access Journals (Sweden)

Halina Aniołczyk

2015-06-01

Full Text Available Background: European Union Directive 2013/35/UE provides for the implementation of EU regulations into national legislation. Our aim is to assess actual health hazards from radiofrequency electromagnetic field (RF EMF (range: 100 kHz – 300 GHz and indicate workplaces with the highest risk to employee health. Material and Methods: Data from measurements of RF EMF performed by the Laboratory of Electromagnetic Hazards in Nofer Institute of Occupational Medicine (Łódź, Poland were analyzed. The analysis covered the results of electric field intensity (E for over 450 selected items. The ranges of protection zones and the extent to which maximum admissible intensity (MAI values were also analyzed. The determinations and measurements of EMF in the work environment met the requirements of Polish Standard, while Polish regulations on the MAI values were used as the criterion for the assessment of the exposure. Results: The highest values of E field intensity at workplaces were measured for: electrosurgery, to 400 V/m, and short-wave diathermy units, to 220 V/m, dielectric welders to 240 V/m, within the FM radio antenna systems, to 180 V/m. The widest protection zones were noted for prototype research instruments, short-wave diathermy units, and dielectric welders. The most excessive (up to 12-fold MAI values were recorded for dielectric welders, short-wave diathermy units (up to 11-fold and microwave diathermy units (up to 8-fold. Conclusions: Our results have confirmed the high RF EMF values for physiotherapists, operators of dielectric welders, and mast maintenance workers in radio communication facilities (especially radio and TV broadcasting stations. Med Pr 2015;66(2:199–212

The B3-VLA CSS sample. VIII. New optical identifications from the Sloan Digital Sky Survey The ultraviolet-optical spectral energy distribution of the young radio sources

Science.gov (United States)

Fanti, C.; Fanti, R.; Zanichelli, A.; Dallacasa, D.; Stanghellini, C.

2011-04-01

Context. Compact steep-spectrum radio sources and giga-hertz peaked spectrum radio sources (CSS/GPS) are generally considered to be mostly young radio sources. In recent years we studied at many wavelengths a sample of these objects selected from the B3-VLA catalog: the B3-VLA CSS sample. Only ≈60% of the sources were optically identified. Aims: We aim to increase the number of optical identifications and study the properties of the host galaxies of young radio sources. Methods: We cross-correlated the CSS B3-VLA sample with the Sloan Digital Sky Survey (SDSS), DR7, and complemented the SDSS photometry with available GALEX (DR 4/5 and 6) and near-IR data from UKIRT and 2MASS. Results: We obtained new identifications and photometric redshifts for eight faint galaxies and for one quasar and two quasar candidates. Overall we have 27 galaxies with SDSS photometry in five bands, for which we derived the ultraviolet-optical spectral energy distribution (UV-O-SED). We extended our investigation to additional CSS/GPS selected from the literature. Most of the galaxies show an excess of ultra-violet (UV) radiation compared with the UV-O-SED of local radio-quiet ellipticals. We found a strong dependence of the UV excess on redshift and analyzed it assuming that it is generated either from the nucleus (hidden quasar) or from a young stellar population (YSP). We also compare the UV-O-SEDs of our CSS/GPS sources with those of a selection of large size (LSO) powerful radio sources from the literature. Conclusions: If the major process of the UV excess is caused by a YSP, our conclusion is that it is the result of the merger process that also triggered the onset of the radio source with some time delay. We do not see evidence for a major contribution from a YSP triggered by the radio sources itself. Appendices A-G are only available in electronic form at http://www.aanda.org

Application of Isotope Techniques for Assessing Nutrient Dynamics in River Basins

International Nuclear Information System (INIS)

2013-05-01

Nutrients are necessary for the growth and survival of animals, plants and other organisms. However, industrial, agricultural and urban development has dramatically increased nutrient levels in river systems, including nitrogen and phosphorus containing substances, degrading water quality, causing acidification and eutrophication and affecting aquatic ecosystems. Nutrient assessment and management in river systems has been an important part of water resource management for the past few decades, but the provision of appropriate and effective nutrient assessment and management continues to be a challenge for water resource managers and policy makers. Difficulties in assessment and management are due in part to the fact that nutrients in rivers may originate from a variety of sources, take numerous pathways and transform into other substances. This publication presents the application of isotope techniques as a powerful tool for evaluating the sources, pathways, transformation, and fate of nutrients in river systems, focusing on nitrogen, phosphorus and carbon containing substances. Eleven researchers using various isotope techniques for different aspects of nutrient studies and two IAEA officers met in a technical meeting and discussed a publication that could assist water resource managers in dealing with nutrient assessment and management issues in river systems. These researchers also recognized the need for careful consideration in selecting appropriate isotope techniques in view of not only technical, but also financial, human resources and logistical capabilities, among others. These contributors are listed as major authors in the later pages of this document. This publication aims at serving water resource managers as a guidebook on the application of isotope techniques in nutrient assessment and management, but it is also expected to be of practical aid for other interested and concerned individuals and organization.

Application of Isotope Techniques for Assessing Nutrient Dynamics in River Basins

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-05-15

Nutrients are necessary for the growth and survival of animals, plants and other organisms. However, industrial, agricultural and urban development has dramatically increased nutrient levels in river systems, including nitrogen and phosphorus containing substances, degrading water quality, causing acidification and eutrophication and affecting aquatic ecosystems. Nutrient assessment and management in river systems has been an important part of water resource management for the past few decades, but the provision of appropriate and effective nutrient assessment and management continues to be a challenge for water resource managers and policy makers. Difficulties in assessment and management are due in part to the fact that nutrients in rivers may originate from a variety of sources, take numerous pathways and transform into other substances. This publication presents the application of isotope techniques as a powerful tool for evaluating the sources, pathways, transformation, and fate of nutrients in river systems, focusing on nitrogen, phosphorus and carbon containing substances. Eleven researchers using various isotope techniques for different aspects of nutrient studies and two IAEA officers met in a technical meeting and discussed a publication that could assist water resource managers in dealing with nutrient assessment and management issues in river systems. These researchers also recognized the need for careful consideration in selecting appropriate isotope techniques in view of not only technical, but also financial, human resources and logistical capabilities, among others. These contributors are listed as major authors in the later pages of this document. This publication aims at serving water resource managers as a guidebook on the application of isotope techniques in nutrient assessment and management, but it is also expected to be of practical aid for other interested and concerned individuals and organization.

[Regional atmospheric environment risk source identification and assessment].

Science.gov (United States)

Zhang, Xiao-Chun; Chen, Wei-Ping; Ma, Chun; Zhan, Shui-Fen; Jiao, Wen-Tao

2012-12-01

Identification and assessment for atmospheric environment risk source plays an important role in regional atmospheric risk assessment and regional atmospheric pollution prevention and control. The likelihood exposure and consequence assessment method (LEC method) and the Delphi method were employed to build a fast and effective method for identification and assessment of regional atmospheric environment risk sources. This method was applied to the case study of a large coal transportation port in North China. The assessment results showed that the risk characteristics and the harm degree of regional atmospheric environment risk source were in line with the actual situation. Fast and effective identification and assessment of risk source has laid an important foundation for the regional atmospheric environmental risk assessment and regional atmospheric pollution prevention and control.

Commercial Radio as Communication.

Science.gov (United States)

Rothenbuhler, Eric W.

1996-01-01

Compares the day-to-day work routines of commercial radio with the principles of a theoretical communication model. Illuminates peculiarities of the conduct of communication by commercial radio. Discusses the application of theoretical models to the evaluation of practicing institutions. Offers assessments of commercial radio deriving from…

Radio-exposure tied to human activities other than medical uses of ionizing radiation, the functioning or nuclear power plants, or experimental atomic explosions

International Nuclear Information System (INIS)

Anon.

1990-01-01

The chapter deals only with the radio-exposure of the general public. Here the authors shall deal with the radio-exposure connected with the activities of two kinds of establishment: factories which prepare, manufacture, or transform radioactive substances, with the exception of nuclear power plants and their associated installations; and establishments which make use of techniques. The ever-expanding employment of radio-isotopes and radiation in industry is explained by the development of new applications and the increasing reliability of these materials. This technology presents many advantages. It allows one to economize on raw material as well as energy, to improve the quality of products while making these installations safer when functioning, and to protect the environment. The applications of radio-isotopes and radiation are varied, contributing to the efficiency of many industrial operations. The fundamental properties of the radio-elements are employed: the detectability over some distance of the radiations emitted by their chemical biological and thermic effects; and the identical behavior of different isotopes of the same element

Uptake and retention of radio-caesium in earthworms cultured in soil contaminated by the Fukushima nuclear power plant accident.

Science.gov (United States)

Fujiwara, K; Takahashi, T; Nguyen, P; Kubota, Y; Gamou, S; Sakurai, S; Takahashi, S

2015-01-01

To understand the effects of radionuclides on non-human biota and the environment, it is essential to study the intake and metabolism of radio-isotopes in earthworms which are among the most important soil organisms, and Eisenia fetida, which were used in this study, are known to be sufficiently sensitive to chemicals and representative of common earthworms. In this study, we assessed the concentration ratios, uptake and retention, absorbed dose rate, and distribution of radio-caesium in earthworms. The concentration ratios of (137)Cs (i.e., the concentrations of radio-caesium in earthworms relative to those in dry soil) were higher early in the culturing period and decreased gradually over the experimental period. (137)Cs taken up by E. fetida was cleared rapidly after the worms were cultured in radio-caesium-free soil, suggesting that the metabolism of radio-caesium in earthworms is very rapid. Autoradiography demonstrated that the concentration of radio-caesium within the digestive tract was as high as that in the soil, while radio-caesium in the body tissue was lower than radio-caesium in the soil and was almost uniformly distributed among earthworm tissues. The highest absorbed dose rate of total exposure to radio-caesium ((137)Cs + (134)Cs) was calculated to be 1.9 × 10(3) (μGy/day) in the earthworms. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rule Based Expert System for Monitoring Real Time Drug Supply in Hospital Using Radio Frequency Identification Technology

Science.gov (United States)

Driandanu, Galih; Surarso, Bayu; Suryono

2018-02-01

A radio frequency identification (RFID) has obtained increasing attention with the emergence of various applications. This study aims to examine the implementation of rule based expert system supported by RFID technology into a monitoring information system of drug supply in a hospital. This research facilitates in monitoring the real time drug supply by using data sample from the hospital pharmacy. This system able to identify and count the number of drug and provide warning and report in real time. the conclusion is the rule based expert system and RFID technology can facilitate the performance in monitoring the drug supply quickly and precisely.

Spectroscopy of 125 QSO candidates and radio galaxies

International Nuclear Information System (INIS)

Wills, B.J.; Wills, D.

1980-01-01

Spectroscopic observations of 125 QSO candidates and radio galaxies are reported, many of which are optical identifications of radio sources in the deep survey in progress at the University of Texas Radio Astronomy Observatory (UTRAO). The remainder include optical identifications of sources in other radio surveys and radio-quiet objects selected by their ultraviolet continua or optical variability. Optical positions are given with O''.5 accuracy for 56 of the objects.Forty objects are confirmed as QSOs; redshifts are given for 38 of them and for 18 galaxies. There are also seven objects with apparently continuous spectra: some of them were already known or suspected to be BL Lacertae objects. Twenty-nine objects were found to be Galactic stars, and the results for the remaining 31 are inconclusive, although 12 of them are probable QSOs and six are probable stars.Our spectroscopy of a sample of 90 blue stellar objects found within 3'' of the UTRAO radio positions (including results from two earlier papers) shows that 81 (90%) are QSOs, with inconclusive results fo the other nine; none of the 90 is known to be a star. Even within 5'' of the UTRAO positions, 111 of 128 blue objects (87%) are QSOs, and only five (4%) are known or suspected to be stars. Among 21 red or neutral-color, apparently stellar objects within 3'' of the UTRAO positions, six are QSOs or compact galaxies, 13 are stars, and the results for two more are inconclusive

The Application of Isotope Techniques in Nutrient Assessment and Management in Riverine Systems. Present and Future

Energy Technology Data Exchange (ETDEWEB)

Ito, M.; Newman, B. D. [International Atomic Energy Agency, Isotope Hydrology Section, Vienna (Austria); Hadwen, W. L. [Australian Rivers Institute, Griffith School of Environment, Griffith University - Nathan Campus, Brisbane, Queensland (Australia); Rogers, K. [National Isotope Center, GNS Science, Lower Hutt (New Zealand); Mayer, B. [Department of Geoscience, University of Calgary, Calgary, Alberta (Canada); Hein, T. [Wasser Cluster Lunz, Interuniversitary Center for Aquatic Research, Lunz-See, and University of Natural Resources and Applied Life Sciences, Institute of Hydrobiology and Aquatic Ecosystem Management, Vienna (Austria); Stellato, L. [Centre for Isotopic Research on Cultural and Environmental Heritage (CIRCE), Seconda Universita degli Studi di Napoli, Caserta (Italy); Ohte, N. [Graduate School of Agricultural and Life Sciences, University of Tokyo, Tokyo (Japan); Mclaughlin, K. [Southern California Coastal Water Research Project, Costa Mesa, California (United States)

2013-05-15

A variety of sources contribute to nutrients in rivers and nutrients may subsequently take various pathways and undergo different transformation processes. We first review representative types of isotopes and the roles of isotope techniques that have been or could be used for nutrient assessment and management. We then present technical, financial and logistical matters to be considered in selecting appropriate isotope techniques for nutrient assessment and management. Lastly we propose several approaches on the application of isotope techniques to make more effective the studies and management of nutrients in rivers in the near future. (author)

Forensic applications of nitrogen and oxygen isotopes in tracing nitrate sources in urban environments

Science.gov (United States)

Silva, S.R.; Ging, P.B.; Lee, R.W.; Ebbert, J.C.; Tesoriero, A.J.; Inkpen, E.L.

2002-01-01

Ground and surface waters in urban areas are susceptible to nitrate contamination from septic systems, leaking sewer lines, and fertilizer applications. Source identification is a primary step toward a successful remediation plan in affected areas. In this respect, nitrogen and oxygen isotope ratios of nitrate, in conjunction with hydrologic data and water chemistry, have proven valuable in urban studies from Austin, Texas, and Tacoma, Washington. In Austin, stream water was sampled during stremflow and baseflow conditions to assess surface and subsurface sources of nitrate, respectively. In Tacoma, well waters were sampled in adjacent sewered and un-sewered areas to determine if locally high nitrate concentrations were caused by septic systems in the un-sewered areas. In both studies, sewage was identified as a nitrate source and mixing between sewage and other sources of nitrate was apparent. In addition to source identification, combined nitrogen and oxygen isotopes were important in determining the significance of denitrification, which can complicate source assessment by reducing nitrate concentrations and increasing ??15N values. The two studies illustrate the value of nitrogen and oxygen isotopes of nitrate for forensic applications in urban areas. ?? Published by Elsevier Science Ltd. on behalf of AEHS.

Dual isotope assays

International Nuclear Information System (INIS)

Smith, G.F.W.; Stevens, R.A.J.; Jacoby, B.

1980-01-01

Dual isotope assays for thyroid function are performed by carrying out a radio-immunoassay for two of thyroxine (T4), tri-iodothyronine (T3), thyroid stimulating hormone (TSH), and thyroxine binding globulin (TBG), by a method wherein a version of one of the thyroid components, preferably T4 or T3 is labelled with Selenium-75 and the version of the other thyroid component is labelled with a different radionuclide, preferably Iodine-125. (author)

ULTRA STEEP SPECTRUM RADIO SOURCES IN THE LOCKMAN HOLE: SERVS IDENTIFICATIONS AND REDSHIFT DISTRIBUTION AT THE FAINTEST RADIO FLUXES

Energy Technology Data Exchange (ETDEWEB)

Afonso, J.; Bizzocchi, L.; Grossi, M.; Messias, H.; Fernandes, C. A. C. [Observatorio Astronomico de Lisboa, Faculdade de Ciencias, Universidade de Lisboa, Tapada da Ajuda, 1349-018 Lisbon (Portugal); Ibar, E.; Ivison, R. J. [UK Astronomy Technology Centre, Royal Observatory, Edinburgh EH9 3HJ (United Kingdom); Simpson, C. [Astrophysics Research Institute, Liverpool John Moores University, Twelve Quays House, Egerton Wharf, Birkenhead CH41 1LD (United Kingdom); Chapman, S.; Gonzalez-Solares, E. [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom); Jarvis, M. J. [Centre for Astrophysics, Science and Technology Research Institute, University of Hertfordshire, Hatfield, Herts AL10 9AB (United Kingdom); Rottgering, H. [Leiden Observatory, Leiden University, Oort Gebouw, P.O. Box 9513, 2300 RA Leiden (Netherlands); Norris, R. P. [CSIRO Astronomy and Space Science, P.O. Box 76, Epping, NSW 1710 (Australia); Dunlop, J.; Best, P. [SUPA, Institute for Astronomy, University of Edinburgh, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom); Pforr, J. [Institute of Cosmology and Gravitation, University of Portsmouth, Dennis Sciama Building, Burnaby Road, Portsmouth PO1 3FX (United Kingdom); Vaccari, M. [Department of Astronomy, University of Padova, vicolo Osservatorio 3, 35122 Padova (Italy); Seymour, N. [Mullard Space Science Laboratory, UCL, Holmbury St Mary, Dorking, Surrey RH5 6NT (United Kingdom); Farrah, D. [Astronomy Centre, Department of Physics and Astronomy, University of Sussex, Brighton BN1 9QH (United Kingdom); Huang, J.-S., E-mail: jafonso@oal.ul.pt [Department of Astrophysics, Oxford University, Keble Road, Oxford OX1 3RH (United Kingdom); and others

2011-12-20

Ultra steep spectrum (USS) radio sources have been successfully used to select powerful radio sources at high redshifts (z {approx}> 2). Typically restricted to large-sky surveys and relatively bright radio flux densities, it has gradually become possible to extend the USS search to sub-mJy levels, thanks to the recent appearance of sensitive low-frequency radio facilities. Here a first detailed analysis of the nature of the faintest USS sources is presented. By using Giant Metrewave Radio Telescope and Very Large Array radio observations of the Lockman Hole at 610 MHz and 1.4 GHz, a sample of 58 USS sources, with 610 MHz integrated fluxes above 100 {mu}Jy, is assembled. Deep infrared data at 3.6 and 4.5 {mu}m from the Spitzer Extragalactic Representative Volume Survey (SERVS) are used to reliably identify counterparts for 48 (83%) of these sources, showing an average total magnitude of [3.6]{sub AB} = 19.8 mag. Spectroscopic redshifts for 14 USS sources, together with photometric redshift estimates, improved by the use of the deep SERVS data, for a further 19 objects, show redshifts ranging from z = 0.1 to z = 2.8, peaking at z {approx} 0.6 and tailing off at high redshifts. The remaining 25 USS sources, with no redshift estimate, include the faintest [3.6] magnitudes, with 10 sources undetected at 3.6 and 4.5 {mu}m (typically [3.6] {approx}> 22-23 mag from local measurements), which suggests the likely existence of higher redshifts among the sub-mJy USS population. The comparison with the Square Kilometre Array Design Studies Simulated Skies models indicates that Fanaroff-Riley type I radio sources and radio-quiet active galactic nuclei may constitute the bulk of the faintest USS population, and raises the possibility that the high efficiency of the USS technique for the selection of high-redshift sources remains even at the sub-mJy level.

Cost-effectiveness Assessment of 5G Systems with Cooperative Radio Resource Sharing

Directory of Open Access Journals (Sweden)

V. Nikolikj

2015-11-01

Full Text Available By use of techno-economic analysis of heterogeneous hierarchical cell structures and spectral efficiencies of the forthcoming advanced radio access technologies, this paper proposes various cost-efficient capacity enlargement strategies evaluated through the level of the production cost per transferred data unit and achievable profit margins. For the purpose of maximizing the aggregate performance (capacity or profit, we also assess the cooperative manners of radio resource sharing between mobile network operators, especially in the cases of capacity over-provisioning, when we also determine the principles to provide guaranteed data rates to a particular number of users. The results show that, for heavily loaded office environments, the future 5G pico base stations could be a preferable deployment solution. Also, we confirm that the radio resource management method with dynamic resource allocation can significantly improve the capacity of two comparably loaded operators which share the resources and aim to increase their cost effectiveness.

Comparative study of radio gas-chromatography and gas chromatography - mass spectrometry coupling in the identification of metabolites of estrogens and progesterone

International Nuclear Information System (INIS)

Adessi, G.; Nhuan, T.Q.; Jayle, M.F.

1978-01-01

Radio-gas chromatography (RGC) and gas chromatography-mass spectrometry (GC-MS) were used to identify estrogen and progesterone metabolites. The RGC enables the identification of metabolites of labelled precursors ( 3 H)-estradiol-17β and ( 14 C)-progesterone were used as precursors. The GC-MS analytical technique with mass fragmentography, offers the interest of using unlabelled precursors at physiological levels. The identification of metabolites was based on obtaining the mass spectrum or the compiled fragmentogram on the basis of the most characteristic fragment ions. More over, several metabolites can be quantified on the same fragmentogram. Results on the metabolism of estradiol-17β and progesterone by the hepatic tissue of guinea pigs are given. (Auth.)

Hygienic assessment of radioactive iodine isotopes

International Nuclear Information System (INIS)

Vasilenko, I.Ya.

1987-01-01

Sources of radioactive iodine isotopes and their biological significance depending on the way of intake are discussed. The degree of food contamination by radioactive iodine as well as products, which serve as the source of its intake into the human body, and results of their processing are considered. The danger of radioactive iodine intake by different groups of population as well as thyroid irradiation effects are discussed. Description of activities, directed to the human body protection against radioactive iodine and assessment of these protection measures efficiency is presented

Transcatheter embolization of renal neoplasms. A comparison of the merits of the radio-active infarct implant versus total embolization with inert material

International Nuclear Information System (INIS)

Lang, E.K.; Pisco, J.M.

1980-01-01

Transcatheter embolization with radio-active infarct particles and inert embolic material has been proposed for adjuvant therapy in the management of renal cell carcinoma. Transcatheter embolization with inert embolic material has been advocated in preparation for surgical resection of renal tumours. Embolization with radio-active infarct particles is undertaken to deliver a tumouricidal dose to the primary neoplasm. The resultant interstitial implant offers the advantage of a high dose to the primary tumour, choice of time of delivery of the radiant energy by selection of a radio-isotope with appropriate half-life, and limitation of the integral dose to the patient by selection of appropriate physical characteristics of the radio-isotope utilized. Transcatheter embolization with radio-active infarct particles is advocated either as definitive therapy for clearly inoperable neoplasms, or in hope to make an initially inoperable neoplasm operable. (Auth.)

Effect of mycorrhizal infection on root uptake by pine seedlings and redistribution of three contrasting radio-isotopes: 85Sr, 95mTc and 137Cs

International Nuclear Information System (INIS)

Plassard, C.; Ladeyn, I.; Staunton, S.

2004-01-01

Mycorrhizal infection is known to improve phosphate nutrition and water supply of higher plants. It has been reported to both increase the uptake of potentially toxic pollutant elements and to protect plants against toxic effects. Little is known about the effect of mycorrhizal infection on the dynamics of radioactive pollutants in soil-plant systems. The aim of this study was to compare the root uptake and root-shoot transfer of three radio-isotopes with contrasting chemical properties ( 85 Sr, 95m Tc and 137 Cs) in mycorrhizal and control, non mycorrhizal plants. The plant studied was Pinus pinaster and the associated ecto-mycorrhizal fungus was Rhizopogon roseolus (strain R18-2). Plants were grown under anoxic conditions for 3 months then transferred to thin layers of autoclaved soil and allowed to grow for four months. After this period, the rhizotrons were dismantled, and plant tissue analysed. Biomass, nutrient content (K, P, N, Ca) and activities of each isotope in roots, shoots and stems were measured, and the degree of mycorrhizal infection assessed. The transfer factors decreased in the order Tc>Sr>Cs as expected from the degree of immobilisation by soil. No effect of mycorrhizal infection on root uptake was observed for Sr. Shoot activity concentration of Tc was decreased by mycorrhizal infection but root uptake correlated well with mycelial soil surface area. In contrast, Cs shoot activity was greater in mycorrhizal than control plants. The uptake and root to shoot distribution shall be discussed in relation to nutrient dynamics. (author)

Guide-line of the radio-iodine (131I) therapy in Graves' disease and thyroid cancer

International Nuclear Information System (INIS)

Mori, Yutaka; Ikekubo, Katsuji

2005-01-01

Radio-iodine ( 131 I) therapy has been using in Graves' disease and well differentiated thyroid cancer. The rules of control in the discharge from radio-isotope hospital were notified in 1999 in Japan. Guideline of the 131 I therapy in Graves' disease and thyroid cancer were prepared by sub-group of Japanese Society of Nuclear Medicine. (author)

Assessment of phyto-available cadmium in soils using isotopic methods

International Nuclear Information System (INIS)

Gerard, Emilie

2000-01-01

The quantification of phyto-available Cd in soils is necessary to determine the transfer risk of this toxic element to plants. Isotopic methods (isotopic exchange kinetics (IEK), isotopic dilution) were used to characterize the phyto-available Cd and, practically, to select chemical methods for determining available Cd to plants. Rye grass (Lolium perenne L.), lettuce (Lactuca saliva L.) and the Cd hyper-accumulator Thlaspi caerulescens J. Presl. and C. Presl. were selected as test plants because of their wide range of Cd uptake ability. The chosen soils had different pH and displayed a Cd-contamination gradient due the atmospheric deposition of industrial particles. In the acidic soil, plants had access to the same metal pool, the one that was isotopically exchangeable with Cd 2+ . This was also the case for rye grass on the calcareous Soils but there, lettuce and T. caerulescens accessed a bigger and non-isotopically exchangeable pool that accounted for 16 to 52 % of the plant available Cd. Most of the Cd was isotopically exchangeable in a short time in the acidic soil (87 % within 21 days). In the calcareous soils two pools were identified, one pool was isotopically exchangeable in a very short time, and the other one Was not exchangeable after 21 days (21 to 10 % of the total Cd). Actually, the quantities of labile cd in the industrial particles which had contaminated these soils were very small. IEK methods and the measurement of the isotopic composition of Cd 2+ in soil solutions allowed for the estimation of the phyto-available Cd in soils, but cannot he commonly used. Most of the chemical extractants studied such as CaCl 2 or DTP A are suitable to assess the phyto-available Cd. However, on calcareous soils, the choice of extractant needs to sometimes be modified in relation to the rate of Cd plant absorption. (author) [fr

Multi-level RF identification system

Science.gov (United States)

Steele, Kerry D.; Anderson, Gordon A.; Gilbert, Ronald W.

2004-07-20

A radio frequency identification system having a radio frequency transceiver for generating a continuous wave RF interrogation signal that impinges upon an RF identification tag. An oscillation circuit in the RF identification tag modulates the interrogation signal with a subcarrier of a predetermined frequency and modulates the frequency-modulated signal back to the transmitting interrogator. The interrogator recovers and analyzes the subcarrier signal and determines its frequency. The interrogator generates an output indicative of the frequency of the subcarrier frequency, thereby identifying the responding RFID tag as one of a "class" of RFID tags configured to respond with a subcarrier signal of a predetermined frequency.

Isotopes accumulation in the thermal column of TRIGA reactor

International Nuclear Information System (INIS)

Iorgulis, C.; Diaconu, D.; Gugiu, D.; Csaba, R.

2013-01-01

The correlation of impurity observed in the virgin graphite and radionuclide content and activities measured in the irradiated graphite needs to know the irradiated history. This is a challenging process if impurity content and irradiation conditions are not accurately known. This is the case of the irradiated graphite in the thermal column of Institute for Nuclear Research Pitesti (INR)14 MW TRIGA reactor. To overcome incomplete impurity content and the unknown position in the column of the measured irradiated graphite available for characterisation and comparison, a set of preliminary simulations were performed. Following Eu 152 /Eu 154 ration they allowed the estimation of an impurity content and irradiation conditions leading to measured activities. Based on these data the radio-isotope accumulation in different positions in the thermal column was predicted. Modelling performed by INR used advanced prediction packages (e.g. WIMS, MCNP ORIGEN-S from Scale 5) to assess the isotopic content of MTR graphite types with irradiation history specific for a TRIGA research reactor. Some certain calculations points from the column were selected in order to model the burnup and isotopes productions using ORIGEN from SCALE code system. (authors)

Perancangan Sistem Pintu Gerbang dengan Sensor Radio Frequency Identification (RFID menggunakan Metode Waterfall

Directory of Open Access Journals (Sweden)

Heru Adi Prasetyo

2013-11-01

Full Text Available Sistem monitoring pada pintu gerbang merupakan bagian yang penting dalam meningkatkan sistem keamanan. Teknologi yang cocok untuk diaplikasikan dipintu gerbang adalah teknologi RFID (Radio Frequency Identification, karena komunikasi antar tag  dengan RFID reader tidak memerlukan kontak langsung, sehingga cocok digunakan pada sistem yang berjalan secara otomatis. Tag RFID dipasang di kendaraan penghuni sebagai kendaraan yang terdaftar di sistem monitoring, sedangkan kendaraan tamu tidak memiliki tag. Model pengembangan perangkat lunak yang dipakai adalah model waterfall, yang terdiri atas analisis kebutuhan sistem, spesifikasi kebutuhan perangkat lunak, desain perangkat lunak (use case, diagram activity, class diagram, danentity relationship diagram, implementasi perangkat lunak (berupa penulisan kode dan implementasi client server, dan pengujian (pengujian alat, pengujian client server, pengujian user requirement, dan pengujian aplikasi. Hasil akhir penelitian ini adalah sistem pintu gerbang yang menggunakan RFID sebagai sensor kendaraan untuk memonitor kendaraan yang keluar masuk. Data kendaraan yang keluar masuk dikelola secara client server dengan antarmuka pengguna berupa aplikasi client server berbasis JAVA

Radio frequency identification (RFID) in health care: privacy and security concerns limiting adoption.

Science.gov (United States)

Rosenbaum, Benjamin P

2014-03-01

Radio frequency identification (RFID) technology has been implemented in a wide variety of industries. Health care is no exception. This article explores implementations and limitations of RFID in several health care domains: authentication, medication safety, patient tracking, and blood transfusion medicine. Each domain has seen increasing utilization of unique applications of RFID technology. Given the importance of protecting patient and data privacy, potential privacy and security concerns in each domain are discussed. Such concerns, some of which are inherent to existing RFID hardware and software technology, may limit ubiquitous adoption. In addition, an apparent lack of security standards within the RFID domain and specifically health care may also hinder the growth and utility of RFID within health care for the foreseeable future. Safeguarding the privacy of patient data may be the most important obstacle to overcome to allow the health care industry to take advantage of the numerous benefits RFID technology affords.

Stable Isotope Identification of Nitrogen Sources for United ...

Science.gov (United States)

We used natural abundance stable isotope data to evaluate nitrogen sources to U.S. west coast estuaries. We collected δ15N of macroalgae data and supplemented this with available data from the literature for estuaries from Mexico to Alaska. Stable isotope ratios of green macroalgae were compared to δ15N of dissolved inorganic nitrogen of oceanic and watershed end members. There was a latitudinal gradient in δ15N of macroalgae with southern estuaries being 7 per mil heavier than northern estuaries. Gradients in isotope data were compared to nitrogen sources estimated by the USGS using the SPARROW model. In California estuaries, the elevation of isotope data appeared to be related to anthropogenic nitrogen sources. In Oregon systems, the nitrogen levels of streams flowing into the estuaries are related to forest cover, rather than to developed land classes. In addition, the δ15N of macroalgae suggested that the ocean and nitrogen-fixing trees in the watersheds were the dominant nitrogen sources. There was also a strong gradient in δ15N of macroalgae with heavier sites located near the estuary mouth. In some Oregon estuaries, there was an elevation an elevation of δ15N above marine end members in the vicinity of wastewater treatment facility discharge locations, suggesting isotopes may be useful for distinguishing inputs along an estuarine gradient. Nutrients are the leading cause of water quality impairments in the United States, and as a result too

Portable Wireless Device Threat Assessment for Aircraft Navigation Radios

Science.gov (United States)

Nguyen, Truong X.; Koppen, Sandra V.; Ely, Jay J.; Williams, Reuben A.; Smith, Laura J.; Salud, Maria Theresa P.

2004-01-01

This paper addresses the concern for Wireless Local Area Network devices and two-way radios to cause electromagnetic interference to aircraft navigation radio systems. Spurious radiated emissions from various IEEE 802.11a, 802.11b, and Bluetooth devices are characterized using reverberation chambers. The results are compared with baseline emissions from standard laptop computer and personal digital assistants (PDAs) that are currently allowed for use on aircraft. The results indicate that the WLAN devices tested are not more of a threat to aircraft navigation radios than standard laptop computers and PDAs in most aircraft bands. In addition, spurious radiated emission data from seven pairs of two-way radios are provided. These two-way radios emit at much higher levels in the bands considered. A description of the measurement process, device modes of operation and the measurement results are reported.

Age of underground waters: isotopes contribution

International Nuclear Information System (INIS)

Chery, L.; Olive, Ph.

2006-01-01

Does water has an age? The age of underground waters can be the duration of their underground travel between their infiltration inside the ground and their captation at a spring or a drilled well. The isotopic geochemistry comes to the support of classical geochemistry to estimate these residence times. Radio-isotopes, like tritium for young waters or carbon 14 for old waters, are used as chronometers to interpret the recharge ways, the flow mechanisms and the residence times of underground waters. Their use is presented in this article with some theoretical recalls and some examples of application. (J.S.)

The importance of CNO isotopes in astrophysics

International Nuclear Information System (INIS)

Audoze, J.

1977-01-01

The research into CNO isotopes in astrophysics includes many different subfields of astrophysics such as meteoretical studies, experimental and theoretical nuclear astrophysics, optical astronomy, radio astronomy, etc. The purpose of this paper is to give some overview of the topic and guideline among these different subfields. (G.T.H.)

Identification of recharge sources of groundwater in the Joganjigawa Fan, Toyama, using isotopic and chemical data

International Nuclear Information System (INIS)

Mizutani, Yoshihiko; Sakurai, Kazuhiro

1988-01-01

The Joganjigawa Fan, an area of rice farming of 50 km 2 lies to the southeast of Toyama city and was formed in the Late Quarternary by terrestrial gravel deposition by the Joganji River. To identify sources of water in shallow aquifers (maximum depth 100 m) beneath the fan, studies of hydrogen and oxygen isotopes in the ground and surface waters of the fan have been made. Major rivers flowing onto the fan are from higher-altitude catchments (maximum altitude 3000 m) and have lower δ 18 D and δO values than rainfall on the fan. The isotopic measurements indicate that the aquifers are mainly recharged by infiltration of the irrigation water, which is derived from the Joganji River, and local precipitations from the surface. In narrow areas along the Jinzu and its tributary the Kumano Rivers, the aquifers are locally recharged from the Jinzu and Kumano Rivers, respectively. Chemical data support this identification of sources of water in the aquifers. (author)

Radio Frequency Identification (RFID) in medical environment: Gaussian Derivative Frequency Modulation (GDFM) as a novel modulation technique with minimal interference properties.

Science.gov (United States)

Rieche, Marie; Komenský, Tomás; Husar, Peter

2011-01-01

Radio Frequency Identification (RFID) systems in healthcare facilitate the possibility of contact-free identification and tracking of patients, medical equipment and medication. Thereby, patient safety will be improved and costs as well as medication errors will be reduced considerably. However, the application of RFID and other wireless communication systems has the potential to cause harmful electromagnetic disturbances on sensitive medical devices. This risk mainly depends on the transmission power and the method of data communication. In this contribution we point out the reasons for such incidents and give proposals to overcome these problems. Therefore a novel modulation and transmission technique called Gaussian Derivative Frequency Modulation (GDFM) is developed. Moreover, we carry out measurements to show the inteference properties of different modulation schemes in comparison to our GDFM.

Lead isotope measurements on aerosol samples with ICP-MS

International Nuclear Information System (INIS)

Widmer, C.R.; Kraehenbuehl, U.; Kramers, J.; Tobler, L.

2000-01-01

Size fractionated aerosols were collected with low pressure Berner impactors on a radio/TV tower 110 m above ground on a hill 10 km east of Bern at a total elevation of 1060 m asl. Two different wind sectors were chosen with the goal of assessing any differences in lead concentration and the 3 radiogenic lead isotopes (206,207,208) for east and west wind, respectively. A leaching technique was used to extract the lead quantitatively from the surface of the impaction foils. This method has been proven to be better suited for airborne particles than complete microwave digestion because it is less time consuming and contamination risk is smaller. Blank considerations played a major role in choosing all the chemicals, tubes, beakers and selecting the analytical method. Lead concentrations were determined with GF-AAS and lead isotopes with two different ICP-MS systems, one being a multicollector system. Precision of the simultaneous multicollector system was found to be at least a factor of 3 better than that of the sequentially operating ICP-MS. The small variations in isotope ratios from the two wind sectors can be distinctly seen with this enhanced precision. The observed relative difference in isotope ratios between east- and westwind was ∝0.6% for 207 Pb/ 206 Pb and ∝0.5% for 208 Pb/ 206 Pb. (orig.)

Assessing connectivity of estuarine fishes based on stable isotope ratio analysis

Science.gov (United States)

Herzka, Sharon Z.

2005-07-01

Assessing connectivity is fundamental to understanding the population dynamics of fishes. I propose that isotopic analyses can greatly contribute to studies of connectivity in estuarine fishes due to the high diversity of isotopic signatures found among estuarine habitats and the fact that variations in isotopic composition at the base of a food web are reflected in the tissues of consumers. Isotopic analysis can be used for identifying nursery habitats and estimating their contribution to adult populations. If movement to a new habitat is accompanied by a shift to foods of distinct isotopic composition, recent immigrants and residents can be distinguished based on their isotopic ratios. Movement patterns thus can be reconstructed based on information obtained from individuals. A key consideration is the rate of isotopic turnover, which determines the length of time that an immigrant to a given habitat will be distinguishable from a longtime resident. A literature survey indicated that few studies have measured turnover rates in fishes and that these have focused on larvae and juveniles. These studies reveal that biomass gain is the primary process driving turnover rates, while metabolic turnover is either minimal or undetectable. Using a simple dilution model and biomass-specific growth rates, I estimated that young fishes with fast growth rates will reflect the isotopic composition of a new diet within days or weeks. Older or slower-growing individuals may take years or never fully equilibrate. Future studies should evaluate the factors that influence turnover rates in fishes during various stages of the life cycle and in different tissues, as well as explore the potential for combining stable isotope and otolith microstructure analyses to examine the relationship between demographic parameters, movement and connectivity.

Particle content, radio-galaxy morphology, and jet power: all radio-loud AGN are not equal

Science.gov (United States)

Croston, J. H.; Ineson, J.; Hardcastle, M. J.

2018-05-01

Ongoing and future radio surveys aim to trace the evolution of black hole growth and feedback from active galactic nuclei (AGNs) throughout cosmic time; however, there remain major uncertainties in translating radio luminosity functions into a reliable assessment of the energy input as a function of galaxy and/or dark matter halo mass. A crucial and long-standing problem is the composition of the radio-lobe plasma that traces AGN jet activity. In this paper, we carry out a systematic comparison of the plasma conditions in Fanaroff & Riley class I and II radio galaxies to demonstrate conclusively that their internal composition is systematically different. This difference is best explained by the presence of an energetically dominant proton population in the FRI, but not the FRII radio galaxies. We show that, as expected from this systematic difference in particle content, radio morphology also affects the jet-power/radio-luminosity relationship, with FRII radio galaxies having a significantly lower ratio of jet power to radio luminosity than the FRI cluster radio sources used to derive jet-power scaling relations via X-ray cavity measurements. Finally, we also demonstrate conclusively that lobe composition is unconnected to accretion mode (optical excitation class): the internal conditions of low- and high-excitation FRII radio lobes are indistinguishable. We conclude that inferences of population-wide AGN impact require careful assessment of the contribution of different jet subclasses, particularly given the increased diversity of jet evolutionary states expected to be present in deep, low-frequency radio surveys such as the LOFAR Two-Metre Sky Survey.

Radio cobalt in French rivers

International Nuclear Information System (INIS)

Lambrechts, A.; Baudin-Jaulent, Y.

1996-01-01

The isotopes 58 and 60 of cobalt present in liquid wastes from nuclear plants or from fuel reprocessing plant of Marcoule are fixed in the different compartments of French rivers. The activity levels of radio-cobalt vary according to the sampled compartments nature (bryophyta > immersed plants > sediment > fish). Elsewhere, laboratory experimentations show that the contamination of fish occurs essentially from the water way rather than from food. Cobalt is mainly fixed by kidneys; muscles is no more than 30 % of the total fish activity. (author)

Discovery of the calcium, indium, tin, and platinum isotopes

International Nuclear Information System (INIS)

Amos, S.; Gross, J.L.; Thoennessen, M.

2011-01-01

Currently, twenty-four calcium, thirty-eight indium, thirty-eight tin, and thirty-nine platinum isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented. - Highlights: Documentation of the discovery of all calcium, indium, tin and platinum isotopes. → Summary of author, journal, year, place and country of discovery for each isotope. → Brief description of discovery history of each isotope.

The Exploration of Radio Frequency Identification (RFID) Application in the Retail Industry: Based on Wal-Mart, Tesco and Sainsburys Case Studies Analysis

OpenAIRE

Gao, Yucheng

2010-01-01

The purpose of this research is to show how radio frequency identification (RFID) benefits supply chain management and explore what difficulties will face by using this technology. It is based on the analysis of three real companies (Wal-Mart, Tesco and Sainsburys) to track how real organizations deploy RFID technology in their company, what problems they face and how operators plan strategies to overcome these difficulties. Furthermore, this research also indicates recommendations and soluti...

Impact of a radio-frequency identification system and information interchange on clearance processes for cargo at border posts

Directory of Open Access Journals (Sweden)

Ernest Bhero

2015-11-01

Full Text Available Background: Improved operational efficiency is important to role players in cross-border logistics and trade corridors. Cargo owners and cargo forwarders have been particularly concerned about long delays in the processing and clearing of cargo at border posts. Field studies suggest that these delays are due to a combination of factors, such as a lack of optimum system configurations and non-optimised human-dependent operations, which make the operations prone to corruption and other malpractices. Objectives: This article presents possible strategies for improving some of the operations in this sector. The research hinges on two key questions: (1 what is the impact of information interchange between stakeholders on the cargo transit time and (2 how will cargo transit time be impacted upon by automatic identification of cargo and the status of cargo seals on arriving vehicles at the border? Method: The use of information communication systems enabled by automatic identification systems (incorporating radio-frequency identification technology is suggested. Results: Results obtained by the described simulation model indicate that improvements of up to 82% with regard to transit time are possible using these techniques. Conclusion: The findings therefore demonstrate how operations at border posts can be improved through the use of appropriate technology and configuration of the operations.

A microbial identification framework for risk assessment.

Science.gov (United States)

Bernatchez, Stéphane; Anoop, Valar; Saikali, Zeina; Breton, Marie

2018-06-01

Micro-organisms are increasingly used in a variety of products for commercial uses, including cleaning products. Such microbial-based cleaning products (MBCP) are represented as a more environmentally-friendly alternative to chemically based cleaning products. The identity of the micro-organisms formulated into these products is often considered confidential business information and is not revealed or it is only partly revealed (i.e., identification to the genus, not to the species). That paucity of information complicates the evaluation of the risk associated with their use. The accurate taxonomic identification of those micro-organisms is important so that a suitable risk assessment of the products can be conducted. To alleviate difficulties associated with adequate identification of micro-organisms in MBCP and other products containing micro-organisms, a microbial identification framework for risk assessment (MIFRA) has been elaborated. It serves to provide guidance on a polyphasic tiered approach, combining the data obtained from the use of various methods (i.e., polyphasic approach) combined with the sequential selection of the methods (i.e., tiered) to achieve a satisfactory identity of the micro-organism to an acceptable taxonomic level. The MIFRA is suitable in various risk assessment contexts for micro-organisms used in any commercial product. Copyright © 2018. Published by Elsevier Ltd.

Radio response of human lymphocytes pretreated with boron and gadoliniums assessed by the, comet assay

International Nuclear Information System (INIS)

Kim, J. K.; Park, T. W.; Cebulska-Wasiewska, A.; Nili, M.

2009-01-01

Boron and gadolinium are among the nuclides that hold a unique property of being a neutron capture therapy agent. Neutron beams have often a considerable portion of gamma rays with fast neutrons. Gamma rays, as beam contaminants, can cause considerable damage to normal tissues even if such tissues do contain high boron concentrations. Materials and Methods: The modification of radio response in human lymphocytes pretreated with boron or gadolinium compound was studied by assessing the DNA damage using single cell gel electrophoresis, the comet assay. The lymphocytes from the human peripheral blood were irradiated with 0, 1, 2 and 4 Gy of gamma rays from a 60 Co isotopic source with or without pretreatment of boron or gadolinium compound for 10 minutes at 4 d egree C . Post-irradiation procedures included slide preparation, cell-lysing, unwinding and electrophoresis, neutralization, staining, and analytic steps, gel electrophoresis. Results: The results indicate that pretreatment with boron compound (50 n M or 250 n M of 10 B) is effective in reducing the radiosensitivity of the lymphocyte DNA. Conversely, pretreatment with gadolinium compound (50 n M) led to a dose-dependent increase in the radiosensitivity, most prominently with a dose of 4 Gy (P<0.001). Furthermore, when the lymphocytes were pretreated with a Combined mixture (1:1) of boron (250 n M) and gadolinium (50 n M) compounds, the reduced radiosensitivity was also observed.

Performance characterization of screen printed radio frequency identification antennas with silver nanopaste

International Nuclear Information System (INIS)

Shin, Dong-Youn; Lee, Yongshik; Kim, Chung Hwan

2009-01-01

The era of wireless communication has come and it is going to flourish in the form of radio frequency identification (RFID) tags. The employment of RFID tags in daily commodities, however, is constrained due to the manufacturing cost. Therefore, industries in the field have sought for alternative manufacturing methods at an ultra low cost and various printing processes have been considered such as inkjet, gravure, flexo, off-set and screen. Although such printing processes are age-old, their applications have been mainly limited to graphic arts and design rules for electronic appliances have not been fully established yet. In this paper, the selection of ink and printing process to fabricate RFID antennas is discussed. The developed silver nanopaste in the range of 20 to 50 nm without the inclusion of microparticles and flakes was sintered at 120 o C for 1 min, which is lower than that of conventional silver paste with microparticles and flakes, and its resistivity was found to be approximately 3 μΩ cm. The radiation performances of various screen printed RFID antennas with silver nanopaste were found comparable to those of copper etched ones.

Performance characterization of screen printed radio frequency identification antennas with silver nanopaste

Energy Technology Data Exchange (ETDEWEB)

Shin, Dong-Youn, E-mail: dongyoun.shin@gmail.co [Nanomachine Research Division, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseong-gu, Daejeon, 305-343 (Korea, Republic of); Lee, Yongshik, E-mail: yongshik.lee@yonsei.ac.k [School of Electrical and Electronic Engineering, Yonsei University, 134 Sinchon-Dong, Seodaemun-Gu, Seoul, 120-749 (Korea, Republic of); Kim, Chung Hwan, E-mail: chkim@kimm.re.k [Nanomachine Research Division, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseong-gu, Daejeon, 305-343 (Korea, Republic of)

2009-09-01

The era of wireless communication has come and it is going to flourish in the form of radio frequency identification (RFID) tags. The employment of RFID tags in daily commodities, however, is constrained due to the manufacturing cost. Therefore, industries in the field have sought for alternative manufacturing methods at an ultra low cost and various printing processes have been considered such as inkjet, gravure, flexo, off-set and screen. Although such printing processes are age-old, their applications have been mainly limited to graphic arts and design rules for electronic appliances have not been fully established yet. In this paper, the selection of ink and printing process to fabricate RFID antennas is discussed. The developed silver nanopaste in the range of 20 to 50 nm without the inclusion of microparticles and flakes was sintered at 120 {sup o}C for 1 min, which is lower than that of conventional silver paste with microparticles and flakes, and its resistivity was found to be approximately 3 {mu}{Omega} cm. The radiation performances of various screen printed RFID antennas with silver nanopaste were found comparable to those of copper etched ones.

The use of stable isotopes in medicinal chemistry

International Nuclear Information System (INIS)

Halliday, D.; Thompson, G.N.

1988-01-01

Stable isotopes have been employed increasingly as tracers over the last decade both to provide the clinician with the opportunity to broaden, in a quantitative manner, discrete areas of diagnosis and research, and the clinical chemist with definitive methodology for specific analyte analysis. These non-radioactive 'heavy' isotopes contain one or more extra neutrons in the nucleus compared with their more abundant 'lighter' analogues. Impetus in the application of stable isotopes for in vivo studies has come from an increased awareness of the possible harmful effects in the use of radionuclides, and a realisation of several positive advantages conferred by the use of stable isotopes in their own right - certain elements of clinical importance (especially nitrogen) lack a useable radio-nuclide equivalent; use of a 'cocktail' of stable isotopes permits a range of studies to be performed in the same patient simultaneously and, within specific constraints, serial studies can be performed in the same patients. (author)

Portable Integrated Wireless Device Threat Assessment to Aircraft Radio Systems

Science.gov (United States)

Salud, Maria Theresa P.; Williams, Reuben A. (Technical Monitor)

2004-01-01

An assessment was conducted on multiple wireless local area network (WLAN) devices using the three wireless standards for spurious radiated emissions to determine their threat to aircraft radio navigation systems. The measurement process, data and analysis are provided for devices tested using IEEE 802.11a, IEEE 802.11b, and Bluetooth as well as data from portable laptops/tablet PCs and PDAs (grouping known as PEDs). A comparison was made between wireless LAN devices and portable electronic devices. Spurious radiated emissions were investigated in the radio frequency bands for the following aircraft systems: Instrument Landing System Localizer and Glideslope, Very High Frequency (VHF) Communication, VHF Omnidirectional Range, Traffic Collision Avoidance System, Air Traffic Control Radar Beacon System, Microwave Landing System and Global Positioning System. Since several of the contiguous navigation systems were grouped under one encompassing measurement frequency band, there were five measurement frequency bands where spurious radiated emissions data were collected for the PEDs and WLAN devices. The report also provides a comparison between emissions data and regulatory emission limit.

An Approach to Near Field Data Selection in Radio Frequency Identification

Science.gov (United States)

Winkworth, Robert D.

Personal identification is needed in many civil activities, and the common identification cards, such as a driver's license, have become the standard document de facto. Radio frequency identification has complicated this matter. Unlike their printed predecessors, contemporary RFID cards lack a practical way for users to control access to their individual fields of data. This leaves them more available to unauthorized parties, and more prone to abuse. Here, then was undertaken a means to test a novel RFID card technology that allows overlays to be used for reliable, reversible data access settings. Similar to other proposed switching mechanisms, it offers advantages that may greatly improve outcomes. RFID use is increasing in identity documents such as drivers' licenses and passports, and with it concern over the theft of personal information, which can enable unauthorized tracking or fraud. Effort put into designing a strong foundation technology now may allow for widespread development on them later. In this dissertation, such a technology was designed and constructed, to drive the central thesis that selective detuning could serve as a feasible, reliable mechanism. The concept had been illustrated effective in limiting access to all fields simultaneously before, and was here effective in limiting access to specific fields selectively. A novel card was produced in familiar dimensions, with an intuitive interface by which users may conceal the visible print of the card to conceal the wireless emissions it allows. A discussion was included of similar technologies, involving capacitive switching, that could further improve the outcomes if such a product were put to large-scale commercial fabrication. The card prototype was put to a battery of laboratory tests to measure the degree of independence between data fields and the reliability of the switching mechanism when used under realistically variable coverage, demonstrating statistically consistent performance in

Modelling of multifrequency IRMPD for laser isotope separation

Indian Academy of Sciences (India)

Unknown

This model was exploited in analysing our MPD results ... separation method for 235U, the fissile isotope of uranium needed to fuel light water ... for analysis. The radio-GC consisted of a commercial GC (Shimadzu GC-R1A) equipped with thermal conductivity detector (TCD) and an indigenously built proportional counter.

Assessment of local and regional isotopic equilibrium in the mantle

Energy Technology Data Exchange (ETDEWEB)

Hofmann, A W; Hart, S R [Carnegie Institution of Washington, D.C. (USA). Dept. of Terrestrial Magnetism

1978-02-01

The assumption of local equilibrium during partial melting is fundamental to the interpretation of isotope and trace element data for mantle-derived rocks. If disequilibrium melting is significant, the scale of the chemical and isotopic heterogeneity in the mantle indicated by the data could be as small as the grain size of the mantle rock, and the isotope data themselves are then of doubtful value to the understanding of mantle processes. To assess the scale of isotopic heterogeneity in a partially molten asthenosphere the authors review the Sr isotopic data of volcanic rocks from oceanic regions and the available experimental data on diffusion kinetics in minerals and melts similar to those existing in the mantle. Although diffusion data are scarce and afflicted with uncertainties, most of the diffusion coefficients for cations in mantle minerals at temperatures of 1000 to 1200/sup 0/C appear to be greater than 10/sup -13/ cm/sup 2/ s/sup -1/. Struntium diffusion in liquid basalt is more rapid, with diffusion coefficients of D = 10/sup -7/ to 10/sup -6/ cm/sup 2/ s/sup -1/ near 1300/sup 0/C. Simple model calculations show that, with these D values, a fluid-free mantle can maintain a state of disequilibrium on a centimeter scale for periods of 10/sup 8/ to 10/sup 9/ years. The state of disequilibrium found in many mantle-derived xenoliths is thus easily explained. A partially molten mantle, on the other hand, will tend to equilibrate locally in less than 10/sup 5/ to 10/sup 6/ years. The analytical data on natural rocks likewise indicate that the inhomogeneities are both old (> 1.5 b.y.) and regional in character and that the consistent isotopic differences between ocean island and ocean floor volcanics cannot be explained by small-scall hetorogeneity of the source rock.

Identification of the autotrophic denitrifying community in nitrate removal reactors by DNA-stable isotope probing.

Science.gov (United States)

Xing, Wei; Li, Jinlong; Cong, Yuan; Gao, Wei; Jia, Zhongjun; Li, Desheng

2017-04-01

Autotrophic denitrification has attracted increasing attention for wastewater with insufficient organic carbon sources. Nevertheless, in situ identification of autotrophic denitrifying communities in reactors remains challenging. Here, a process combining micro-electrolysis and autotrophic denitrification with high nitrate removal efficiency was presented. Two batch reactors were fed organic-free nitrate influent, with H 13 CO 3 - and H 12 CO 3 - as inorganic carbon sources. DNA-based stable-isotope probing (DNA-SIP) was used to obtain molecular evidence for autotrophic denitrifying communities. The results showed that the nirS gene was strongly labeled by H 13 CO 3 - , demonstrating that the inorganic carbon source was assimilated by autotrophic denitrifiers. High-throughput sequencing and clone library analysis identified Thiobacillus-like bacteria as the most dominant autotrophic denitrifiers. However, 88% of nirS genes cloned from the 13 C-labeled "heavy" DNA fraction showed low similarity with all culturable denitrifiers. These findings provided functional and taxonomical identification of autotrophic denitrifying communities, facilitating application of autotrophic denitrification process for wastewater treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Procedure for 40K isotope separation from beam of potassium atoms using optical orientation of atoms and radio-frequency excitation of target isotope

International Nuclear Information System (INIS)

Nikitin, A.I.; Velichko, A.M.; Vnukov, A.V.; Mal'tsev, K.K.; Nabiev, Sh.Sh.

1999-01-01

The procedure for potassium isotope separation, which is liable to reduce of the prise of the product as compared with the up-to-date prise of the 40 K isotope obtained by means of electromagnetic procedure for isotope separation, is proposed. The scheme assumes the increasing flow of the wanted isotope at the sacrifice of the increasing intensity of atomic beam and the increase of the selectivity of need isotope atoms at the sacrifice of the the reduction in the square of collector profile. The objective is achieved that provide of polarized state of the potassium atoms is produced by optic orientation with circular-polarized light [ru

Development of O-18 stable isotope separation technology using membrane

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Woo; Kim, Taek Soo; Choi, Hwa Rim; Park, Sung Hee; Lee, Ki Tae; Chang, Dae Shik

2006-06-15

The ultimate goal of this investigation is to develop the separation technology for O-18 oxygen stable isotope used in a cyclotron as a target for production of radioisotope F-18. F-18 is a base material for synthesis of [F-18]FDG radio-pharmaceutical, which is one of the most important tumor diagnostic agent used in PET (Positron Emission Tomography). More specifically, this investigation is focused on three categories as follow, 1) development of the membrane distillation isotope separation process to re-enrich O-18 stable isotope whose isotopic concentration is reduced after used in a cyclotron, 2) development of organic impurity purification technology to remove acetone, methanol, ethanol, and acetonitrile contained in a used cyclotron O-18 enriched target water, and 3) development of a laser absorption spectroscopic system for analyzing oxygen isotopic concentration in water.

A new laboratory radio frequency identification (RFID) system for behavioural tracking of marine organisms.

Science.gov (United States)

Aguzzi, Jacopo; Sbragaglia, Valerio; Sarriá, David; García, José Antonio; Costa, Corrado; del Río, Joaquín; Mànuel, Antoni; Menesatti, Paolo; Sardà, Francesc

2011-01-01

Radio frequency identification (RFID) devices are currently used to quantify several traits of animal behaviour with potential applications for the study of marine organisms. To date, behavioural studies with marine organisms are rare because of the technical difficulty of propagating radio waves within the saltwater medium. We present a novel RFID tracking system to study the burrowing behaviour of a valuable fishery resource, the Norway lobster (Nephrops norvegicus L.). The system consists of a network of six controllers, each handling a group of seven antennas. That network was placed below a microcosm tank that recreated important features typical of Nephrops' grounds, such as the presence of multiple burrows. The animals carried a passive transponder attached to their telson, operating at 13.56 MHz. The tracking system was implemented to concurrently report the behaviour of up to three individuals, in terms of their travelled distances in a specified unit of time and their preferential positioning within the antenna network. To do so, the controllers worked in parallel to send the antenna data to a computer via a USB connection. The tracking accuracy of the system was evaluated by concurrently recording the animals' behaviour with automated video imaging. During the two experiments, each lasting approximately one week, two different groups of three animals each showed a variable burrow occupancy and a nocturnal displacement under a standard photoperiod regime (12 h light:12 h dark), measured using the RFID method. Similar results were obtained with the video imaging. Our implemented RFID system was therefore capable of efficiently tracking the tested organisms and has a good potential for use on a wide variety of other marine organisms of commercial, aquaculture, and ecological interest.

Effect of mycorrhizal infection on root uptake by pine seedlings and redistribution of three contrasting radio-isotopes: {sup 85}Sr, {sup 95m}Tc and {sup 137}Cs

Energy Technology Data Exchange (ETDEWEB)

Plassard, C.; Ladeyn, I.; Staunton, S. [Institut National de Recherches Agronomiques (INRA), UMR Rhizosphere and Symbiose 34 - Montpellier (France)

2004-07-01

Mycorrhizal infection is known to improve phosphate nutrition and water supply of higher plants. It has been reported to both increase the uptake of potentially toxic pollutant elements and to protect plants against toxic effects. Little is known about the effect of mycorrhizal infection on the dynamics of radioactive pollutants in soil-plant systems. The aim of this study was to compare the root uptake and root-shoot transfer of three radio-isotopes with contrasting chemical properties ({sup 85}Sr, {sup 95m}Tc and {sup 137}Cs) in mycorrhizal and control, non mycorrhizal plants. The plant studied was Pinus pinaster and the associated ecto-mycorrhizal fungus was Rhizopogon roseolus (strain R18-2). Plants were grown under anoxic conditions for 3 months then transferred to thin layers of autoclaved soil and allowed to grow for four months. After this period, the rhizotrons were dismantled, and plant tissue analysed. Biomass, nutrient content (K, P, N, Ca) and activities of each isotope in roots, shoots and stems were measured, and the degree of mycorrhizal infection assessed. The transfer factors decreased in the order Tc>Sr>Cs as expected from the degree of immobilisation by soil. No effect of mycorrhizal infection on root uptake was observed for Sr. Shoot activity concentration of Tc was decreased by mycorrhizal infection but root uptake correlated well with mycelial soil surface area. In contrast, Cs shoot activity was greater in mycorrhizal than control plants. The uptake and root to shoot distribution shall be discussed in relation to nutrient dynamics. (author)

The Beginnings of Australian Radio Astronomy

Science.gov (United States)

Sullivan, Woodruff T.

The early stages of Australian radio astronomy, especially the first decade after World War II, are described in detail. These include the transition of the CSIRO Radiophysics Laboratory, under the leadership of Joseph Pawsey and Taffy Bowen, from a wartime laboratory in 1945 to, by 1950, the largest and one of the two most important radio astronomy groups in the world (with the Cavendish Laboratory at Cambridge University). The initial solar investigations are described, including discovery of the hot corona and development of the sea-cliff interferometer. During this same period painstaking `radio star' observations by John Bolton and colleagues led to the first suggested optical identifications of Taurus-A (the Crab Nebula), Centaurus-A (NGC 5128), and Virgo-A (M87). The factors that led to the extraordinary early success of the Radiophysics Laboratory are analyzed in detail, followed by discussion of how the situation changed significantly in the second decade of 1955-1965. Finally, the development of major Australian instruments, from the Parkes Radio Telescope (1961) to the Australia Telescope (1988), is briefly presented. This chapter is a direct reprint of the following research paper: Sullivan, W., 2005. The beginnings of Australian radio astronomy. Journal of Astronomical History and Heritage, 8, 11-32.

Observational constraints on the cosmological evolution of extragalactic radio sources

International Nuclear Information System (INIS)

Perryman, M.A.C.

1979-11-01

The thesis discusses statistical studies of the remote radio sources, taking into account the various parameters for such sources, based on data from the various Cambridge Catalogues. Some of the sources have optical counterparts which yield distances from their redshifts. Combining optical and radio observations, an attempt is made to investigate whether large-scale evolution of galaxies occurs as one looks backwards in time to early epochs. Special attention is paid to ensuring that the optical identifications of the selected radio sources are sound and that the selection procedures do not distort the inferences obtained. (U.K.)

Stable Isotope Quantitative N-Glycan Analysis by Liquid Separation Techniques and Mass Spectrometry.

Science.gov (United States)

Mittermayr, Stefan; Albrecht, Simone; Váradi, Csaba; Millán-Martín, Silvia; Bones, Jonathan

2017-01-01

Liquid phase separation analysis and subsequent quantitation remains a challenging task for protein-derived oligosaccharides due to their inherent structural complexity and diversity. Incomplete resolution or co-detection of multiple glycan species complicates peak area-based quantitation and associated statistical analysis when optical detection methods are used. The approach outlined herein describes the utilization of stable isotope variants of commonly used fluorescent tags that allow for mass-based glycan identification and relative quantitation following separation by liquid chromatography (LC) or capillary electrophoresis (CE). Comparability assessment of glycoprotein-derived oligosaccharides is performed by derivatization with commercially available isotope variants of 2-aminobenzoic acid or aniline and analysis by LC- and CE-mass spectrometry. Quantitative information is attained from the extracted ion chromatogram/electropherogram ratios generated from the light and heavy isotope clusters.

Lifetime Stable isotopes profiles in whale earplug: assessment of foraging and migrations in the Northern Hemisphere

Science.gov (United States)

Mansouri, F.; Crain, D.; Winfield, Z.; Trumble, S.; Usenko, S.

2017-12-01

Whale earplugs, historically used for aging, were used to reconstruct lifetime stable isotope profiles for carbon (δ13C) and nitrogen (δ15N) for individual whales by delaminating lamina within the earplug. These stable isotope profile, which provide Continuous lifetime records of feeding, foraging ecology, and migration, were determined for 20 individuals from 4 baleen species including fin, minke, humpback, and blue whales spanning more than a century (1869 - 2014) using stable isotope analysis. Approximately 1 mg tissue from each lamina (n=1200) was analyzed for carbon and nitrogen stable isotope using continuous flow isotope ratio mass spectrometer (CF-IRMS). This research using whale earplugs have combined age estimates with stable isotope measurements to reconstruct lifetime foraging profiles with a 6-month resolution, providing an unprecedented opportunity to assess periods and trends in dietary fluctuations as well as migration between different foraging area which have distinct isotope values. Trends with these profiles suggest long-term changing in migration, while annual variability highlights seasonal fasting and feeding. Isotopic ratios were also used to identify subpopulations of Atlantic fin whales, which enabled us to assign unidentified humpback and minke whales to the Atlantic or Pacific Oceans. This historical archive of data provides us an unprecedented tool to assess long term marine ecosystem and subsequently marine organism transition to alternate foraging area and shed light on the whale's population status in the Northern hemisphere.

Evaluating the Impact of Radio Frequency Identification Retained Surgical Instruments Tracking on Patient Safety: Literature Review.

Science.gov (United States)

Schnock, Kumiko O; Biggs, Bonnie; Fladger, Anne; Bates, David W; Rozenblum, Ronen

2017-02-22

Retained surgical instruments (RSI) are one of the most serious preventable complications in operating room settings, potentially leading to profound adverse effects for patients, as well as costly legal and financial consequences for hospitals. Safety measures to eliminate RSIs have been widely adopted in the United States and abroad, but despite widespread efforts, medical errors with RSI have not been eliminated. Through a systematic review of recent studies, we aimed to identify the impact of radio frequency identification (RFID) technology on reducing RSI errors and improving patient safety. A literature search on the effects of RFID technology on RSI error reduction was conducted in PubMed and CINAHL (2000-2016). Relevant articles were selected and reviewed by 4 researchers. After the literature search, 385 articles were identified and the full texts of the 88 articles were assessed for eligibility. Of these, 5 articles were included to evaluate the benefits and drawbacks of using RFID for preventing RSI-related errors. The use of RFID resulted in rapid detection of RSI through body tissue with high accuracy rates, reducing risk of counting errors and improving workflow. Based on the existing literature, RFID technology seems to have the potential to substantially improve patient safety by reducing RSI errors, although the body of evidence is currently limited. Better designed research studies are needed to get a clear understanding of this domain and to find new opportunities to use this technology and improve patient safety.

Carbon isotope ratios and isotopic correlations between components in fruit juices

Science.gov (United States)

Wierzchnicki, Ryszard

2013-04-01

Nowadays food products are defined by geographical origin, method of production and by some regulations concerning terms of their authenticity. Important data for confirm the authenticity of product are providing by isotopic methods of food control. The method checks crucial criteria which characterize the authenticity of inspected product. The European Union Regulations clearly show the tendency for application of the isotopic methods for food authenticity control (wine, honey, juice). The aim of the legislation steps is the protection of European market from possibility of the commercial frauds. Method of isotope ratio mass spectrometry is very effective tool for the use distinguishably the food products of various geographical origin. The basic problem for identification of the sample origin is the lack of databases of isotopic composition of components and information about the correlations of the data. The subject of the work was study the isotopic correlations existing between components of fruits. The chemical and instrumental methods of separation: water, sugars, organic acids and pulp from fruit were implemented. IRMS technique was used to measure isotopic composition of samples. The final results for original samples of fruits (apple, strawberry etc.) will be presented and discussed. Acknowledgement: This work was supported by the Polish Ministry of Science and Higher Education under grant NR12-0043-10/2010.

Effect of the magnetic isotope of magnesium, 25Mg, on post-radiation recovery of Saccharomyces cerevisiae

International Nuclear Information System (INIS)

Grodzinskij, D.M.; Evstyukhina, T.A.; Kol'tover, V.K.; Korolev, V.G.; Kutlakhmedov, Yu.A.; Grodzinskij, D.M.; Evstyukhina, T.A.; Kol'tover, V.K.; Korolev, V.G.; Kutlakhmedov, Yu.A.; Grodzinskij, D.M.; Evstyukhina, T.A.; Kol'tover, V.K.; Korolev, V.G.; Kutlakhmedov, Yu.A.

2011-01-01

Among three stable magnesium isotopes, 24 Mg, 25 Mg, and 26 Mg with natural abundance 79, 10, and 11%, only 25 Mg has the nuclear spin (I=5/2) and, therefore, the nuclear magnetic moment. Two other isotopes are spinless (I=0) and, hence, have no magnetic moment. We have revealed that magnetic isotope 25 Mg, by comparison to nonmagnetic isotope 24 Mg, essentially stimulates the recovery process in the yeast cells, Saccharomyces cerevisiae, after UV irradiation. Thus, we have first documented the magnetic isotope effect in radiation biology. This finding opens up the way to the development of novel radio-protectors based on the stable magnetic isotopes.

Communicating Science for Impact: Radio for Reaching Farmers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Radio to share results The project will translate research results into simple radio campaign messages targeting small-scale farmers. Researchers will test ... The project will assess the effect of radio campaigns in influencing adoption decisions among listeners. Farm Radio ... Agent(e) responsable du CRDI. crmadm CRM ...

Vulnerability Identification Errors in Security Risk Assessments

OpenAIRE

Taubenberger, Stefan

2014-01-01

At present, companies rely on information technology systems to achieve their business objectives, making them vulnerable to cybersecurity threats. Information security risk assessments help organisations to identify their risks and vulnerabilities. An accurate identification of risks and vulnerabilities is a challenge, because the input data is uncertain. So-called ’vulnerability identification errors‘ can occur if false positive vulnerabilities are identified, or if vulnerabilities remain u...

The centenary of the discovery of isotopes

International Nuclear Information System (INIS)

Soulie, Edgar

2013-01-01

This article recalls works performed by different scientists (Marckwald and Keetman, Stromholm and Svedberg, Soddy, Thompson, Aston) which resulted in the observation and identification of the existence of isotopes. The author also recalls various works related to mechanisms of production of isotopes, the discovery of uranium fission and the principle of chain reaction. The author notably evokes French scientists involved in the development of mass spectroscopy and in the research and applications on isotopes within the CEA after the Second World War. A bibliography of article and books published by one of them, Etienne Roth, is provided. References deal with nuclear applications of chemical engineering (heavy water and its production, chemical processes in fission reactors, tritium extraction and enrichment), isotopic fractioning and physical-chemical processes, mass spectrometry and isotopic analysis, isotopic geochemistry (on 07;Earth, search for deuterium in moon rocks and their consequences), first dating and the Oklo phenomenon, radioactive dating, water and climate (isotopic hydrology, isotopes and hailstone formation, the atmosphere), and miscellaneous scientific fields (nuclear measurements and radioactivity, isotopic abundances and atomic weight, isotopic separation and use of steady isotopes)

Implementasi Rule Based Expert Systems untuk Realtime Monitoring Penyelesaian Perkara Pidana Menggunakan Teknologi Radio Frequency Identification

Directory of Open Access Journals (Sweden)

Mar Fuah

2017-05-01

Full Text Available One of the problems in the criminal case completions is that the difficulty of making decision to estimate when the settlement of the case file will be fulfilled. It is caused by the number of case files handled and detention time changing. Therefore, the fast and accurate information is needed. The research aims to develop a monitoring system tracking and tracking of scheduling rules using Rule Based Expert Systems method with 17 rules, and supported by Radio Frequency Identification technology (RFID in the form of computer applications. Based on the output of the system, an analysis is performed in the criminal case settlement process with a set of IF-THEN rules. The RFID reader read the data of case files through radio wave signals emitted by the antenna toward active-Tag attached in the criminal case file. The system is designed to monitor the tracking and tracing of RFID-based scheduling rules in realtime way that was built in the form of computer application in accordance with the system design. This study results in no failure in reading active tags by the RFID reader to detect criminal case files that had been examined. There were many case files handled in three different location, they were the constabulary, prosecutor, and judges of district court and RFID was able to identify them simultaneously. So, RFID supports the implementation of Rule Based Expert Systems very much for realtime monitoring in criminal case accomplishment.

A study of faint radio sources near the North Galactic Pole

International Nuclear Information System (INIS)

Benn, C.R.

1981-09-01

A large amount of observational data has been obtained on faint radio sources in a small area of sky near the North Galactic Pole (the 5C 12 area). This provides a new perspective (3 decades in flux density from the 3CR catalogue) on the physical properties and cosmological evolution of extragalactic radio sources. Chapter 1 introduces the problem and concludes that faint-object cosmology is best served by intensive investigation of sources in a small area of sky. An optimum area is chosen, at right ascension 12sup(h) 58sup(m) 43sup(s) and declination 35 0 14' 00'' (1950.0). Chapter 2 describes the 5C12 radio survey (complete to 9mJy apparent flux density at 408MHz) conducted with the One Mile Telescope at Cambridge. Chapter 4 describes a 4.85GHz survey to 20mJy of the area, conducted at Effelsberg. In chapter 5, a program of optical identification for the sources is described, using deep (msub(g) = 22.5, msub(y) = 20.7) Schmidt plates taken at Hale Observatories. A statistical algorithm is developed to cope with the problems of optical confusion due to radio positional errors. Chapter 6 draws on data from the previous 4, and presents results concerning radio source counts, spectral index distributions, optical identifications and clustering. (author)

Stable Isotope Technique to Assess Intake of Human Milk in Breastfed Infants

International Nuclear Information System (INIS)

2014-01-01

This publication was developed by an international group of experts as an integral part of the IAEA’s efforts to contribute to the transfer of technology and knowledge in nutrition. Its aim is to assist Member States in their efforts to combat malnutrition by facilitating the use of relevant nuclear techniques. The stable (non-radioactive) isotope technique has been developed to assess intake of human milk in breastfed infants. The practical application of the stable isotope technique, based on analysis of deuterium by Fourier transform infrared spectrometry (FTIR), is presented in this book

Lead and Stable Isotopes in Sediments of Babitonga Bay: An Oil Spill Case

Energy Technology Data Exchange (ETDEWEB)

Barrosa, V. G.; Oliveiraa, T. M.N.; Vaza, C. [University of UNIVILLE, Department of Environmental Engineering, Joinville, Santa Catarina (Brazil); Zuppi, G. M. [Dipartimento di Scienze Molecolari e Nanosistemi Universita Ca' Foscari, Venezia and Institute of Environmental Geology and Geoengineering, National Research Council, Monterotondo (Italy)

2013-07-15

The hydrologic complex of Babitonga Bay (Brazil) forms a vast environmental complex, hosting the last great mangrove bulk of the southern hemisphere. Mangroves are among the most productive ecosystems on earth. The effects of an oil spill were studied in Babitonga Bay using lead and carbon isotopes. Samples of the spilled oil were obtained nine months after the accident, as well as sediment and water samples. Thus, the isotopic composition of the oil allowed the tracing of the environmental pollution. Notwithstanding the delay in time, isotopes of lead and carbon allowed the identification of areas where the presence of the oil can be still detected, permitting assessment of the extent of pollution. Contaminated sediments exhibited an isotopic composition ({sup 206}Pb/{sup 207}Pb and {sup 208}Pb/{sup 206}Pb) close to that of the oil spilled. Moreover {delta}{sup 13}C also permitted the ratification of these results. Others isotopes were used but with no contributions. Conclusions are derived in terms of the source of the pollution in the specific area. (author)

The multipurpose application of radio frequency identification (RFID) in the Tourism industry: On a requirement analysis for employing RFID technology in the hotel sector

OpenAIRE

Hassannia, Raheleh

2014-01-01

ABSTRACT: This study tried to evaluate the effects of Radio Frequency Identification ( RFID) as the new and latest technological advancement towards the implementation of profit chain model (Heskett et al, 1997) on international tourists (inbound) in the case of North Cyprus. North Cyprus is blessed with natural endowments and proximity to tourist market, especially the European countries. It has numerous regional and geographical advantages for a full-blown tourism industry. The study has fo...

High Resolution Gamma Ray Analysis of Medical Isotopes

Science.gov (United States)

Chillery, Thomas

2015-10-01

Compton-suppressed high-purity Germanium detectors at the University of Massachusetts Lowell have been used to study medical radioisotopes produced at Brookhaven Linac Isotope Producer (BLIP), in particular isotopes such as Pt-191 used for cancer therapy in patients. The ability to precisely analyze the concentrations of such radio-isotopes is essential for both production facilities such as Brookhaven and consumer hospitals across the U.S. Without accurate knowledge of the quantities and strengths of these isotopes, it is possible for doctors to administer incorrect dosages to patients, thus leading to undesired results. Samples have been produced at Brookhaven and shipped to UML, and the advanced electronics and data acquisition capabilities at UML have been used to extract peak areas in the gamma decay spectra. Levels of Pt isotopes in diluted samples have been quantified, and reaction cross-sections deduced from the irradiation parameters. These provide both cross checks with published work, as well as a rigorous quantitative framework with high quality state-of-the-art detection apparatus in use in the experimental nuclear physics community.

Nuclear charge radius measurements of radioactive beryllium isotopes

CERN Multimedia

2002-01-01

We propose to measure the nuclear charge radii of the beryllium isotopes $^{7,9,10}$Be and the one-neutron halo isotope $^{11}$Be using laser spectroscopy of trapped ions. Ions produced at ISOLDE and ionized with the laser ion source will be cooled and bunched in the radio-frequency buncher of the ISOLTRAP experiment and then transferred into a specially designed Paul trap. Here, they will be cooled to temperatures in the mK range employing sympathetic and direct laser cooling. Precision laser spectroscopy of the isotope shift on the cooled ensemble in combination with accurate atomic structure calculations will provide nuclear charge radii with a precision of better than 3%. This will be the first model-independent determination of a one-neutron halo nuclear charge radius.

Impact of radio-frequency identification (RFID) technologies on the hospital supply chain: a literature review.

Science.gov (United States)

Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea

2013-01-01

Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives.

Impact of Radio-Frequency Identification (RFID) Technologies on the Hospital Supply Chain: A Literature Review

Science.gov (United States)

Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea

2013-01-01

Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives. PMID:24159272

Realization of stable and homogenous carbon nanotubes dispersion as ink for radio frequency identification applications

International Nuclear Information System (INIS)

Bougot, M Nicolas; Dung Dang, Thi My; Le, Nguyen Ngan; Dang, Mau Chien

2013-01-01

The use of carbon nanotubes (CNTs) in radio frequency identification (RFID) applications offers a very large range of possibilities to exploit the incredible properties of CNTs. However, due to their entanglement state, their size and the different interacting forces between nanotubes bundles present at nanometric scale, CNTs debundling is very hard to achieve, requiring specific equipment and chemicals. Our purpose was to reduce as small as possible CNTs bundles, in order to realize ink to print on an RFID antenna. The size of the head printer nozzles required very small particles, about a few micrometers, in order to be able to print on the sensitive position of the antenna. To reduce the size of the bundles and stabilize the solution, an ultrasonic horn with an ultrasonic bath were combined as mechanical stress for CNT dispersion, and some chemicals such as sodium dodecyl sulfate (SDS)—a surfactant, N-methyl-2-pyrrolidone (NMP)—a solvent, or chitosan were used to meet our requirements. (paper)

Wireless Hydrogen Smart Sensor Based on Pt/Graphene-Immobilized Radio-Frequency Identification Tag.

Science.gov (United States)

Lee, Jun Seop; Oh, Jungkyun; Jun, Jaemoon; Jang, Jyongsik

2015-08-25

Hydrogen, a clean-burning fuel, is of key importance to various industrial applications, including fuel cells and the aerospace and automotive industries. However, hydrogen gas is odorless, colorless, and highly flammable; thus, appropriate safety protocol implementation and monitoring are essential. Highly sensitive hydrogen-gas leak detection and surveillance systems are needed; additionally, the ability to monitor large areas (e.g., cities) via wireless networks is becoming increasingly important. In this report, we introduce a radio frequency identification (RFID)-based wireless smart-sensor system, composed of a Pt-decorated reduced graphene oxide (Pt_rGO)-immobilized RFID sensor tag and an RFID-reader antenna-connected network analyzer to detect hydrogen gas. The Pt_rGOs, produced using a simple chemical reduction process, were immobilized on an antenna pattern in the sensor tag through spin coating. The resulting Pt_rGO-based RFID sensor tag exhibited a high sensitivity to hydrogen gas at unprecedentedly low concentrations (1 ppm), with wireless communication between the sensor tag and RFID-reader antenna. The wireless sensor tag demonstrated flexibility and a long lifetime due to the strong immobilization of Pt_rGOs on the substrate and battery-independent operation during hydrogen sensing, respectively.

Measuring border delay and crossing times at the US-Mexico border : part II. Step-by-step guidelines for implementing a radio frequency identification (RFID) system to measure border crossing and wait times.

Science.gov (United States)

2012-06-01

The purpose of these step-by-step guidelines is to assist in planning, designing, and deploying a system that uses radio frequency identification (RFID) technology to measure the time needed for commercial vehicles to complete the northbound border c...

Analysis of the possibility of applying radio frequency identification in the flexible production process

Directory of Open Access Journals (Sweden)

Mirkov Gligorije I.

2017-01-01

Full Text Available Flexible manufacturing systems (FMS as a complex and stochastic environments require the development of innovative, intelligent control architectures in order to improve flexibility, agility and reconfiguration. Distribution management system addresses this challenge by introducing the optimal process management which is supported by the autonomous control units that cooperate with each other. Most of the existing transport management system, has a lack of flexibility and agility, especially in cases where a large variety of products, a small representation of parts of smaller dimensions. In such cases, the system is insensitive to random ‘ad-hoc’ events. Phase transport parts through flexible manufacturing system can be potentially used to obtain information about the product in order to process management. Radio frequency identification (RFID has been introduced as new technology allows monitoring, identifying and categorizing parts. This paper gives grounds on the flexible cell architecture (FMC and the deployment of RFID devices with the aim of the distribution and tracking of parts. The paper gives an example of setting agent base control architecture FMC.

Effectiveness of radio in dissemination of agricultural information to ...

African Journals Online (AJOL)

The three objectives of the study were; (1) to identify the agricultural technologies /recommendations which rural farmers used with the help of radio; (2) to assess the frequency by rural farmers' access radio in getting extension information; and (3) to assess the frequency by which the rural farmer listening to some radio ...

A New Laboratory Radio Frequency Identification (RFID) System for Behavioural Tracking of Marine Organisms

Science.gov (United States)

Aguzzi, Jacopo; Sbragaglia, Valerio; Sarriá, David; García, José Antonio; Costa, Corrado; del Río, Joaquín; Mànuel, Antoni; Menesatti, Paolo; Sardà, Francesc

2011-01-01

Radio frequency identification (RFID) devices are currently used to quantify several traits of animal behaviour with potential applications for the study of marine organisms. To date, behavioural studies with marine organisms are rare because of the technical difficulty of propagating radio waves within the saltwater medium. We present a novel RFID tracking system to study the burrowing behaviour of a valuable fishery resource, the Norway lobster (Nephrops norvegicus L.). The system consists of a network of six controllers, each handling a group of seven antennas. That network was placed below a microcosm tank that recreated important features typical of Nephrops’ grounds, such as the presence of multiple burrows. The animals carried a passive transponder attached to their telson, operating at 13.56 MHz. The tracking system was implemented to concurrently report the behaviour of up to three individuals, in terms of their travelled distances in a specified unit of time and their preferential positioning within the antenna network. To do so, the controllers worked in parallel to send the antenna data to a computer via a USB connection. The tracking accuracy of the system was evaluated by concurrently recording the animals’ behaviour with automated video imaging. During the two experiments, each lasting approximately one week, two different groups of three animals each showed a variable burrow occupancy and a nocturnal displacement under a standard photoperiod regime (12 h light:12 h dark), measured using the RFID method. Similar results were obtained with the video imaging. Our implemented RFID system was therefore capable of efficiently tracking the tested organisms and has a good potential for use on a wide variety of other marine organisms of commercial, aquaculture, and ecological interest. PMID:22163710

A New Laboratory Radio Frequency Identification (RFID System for Behavioural Tracking of Marine Organisms

Directory of Open Access Journals (Sweden)

Francesc Sardà

2011-10-01

Full Text Available Radio frequency identification (RFID devices are currently used to quantify several traits of animal behaviour with potential applications for the study of marine organisms. To date, behavioural studies with marine organisms are rare because of the technical difficulty of propagating radio waves within the saltwater medium. We present a novel RFID tracking system to study the burrowing behaviour of a valuable fishery resource, the Norway lobster (Nephrops norvegicus L.. The system consists of a network of six controllers, each handling a group of seven antennas. That network was placed below a microcosm tank that recreated important features typical of Nephrops’ grounds, such as the presence of multiple burrows. The animals carried a passive transponder attached to their telson, operating at 13.56 MHz. The tracking system was implemented to concurrently report the behaviour of up to three individuals, in terms of their travelled distances in a specified unit of time and their preferential positioning within the antenna network. To do so, the controllers worked in parallel to send the antenna data to a computer via a USB connection. The tracking accuracy of the system was evaluated by concurrently recording the animals’ behaviour with automated video imaging. During the two experiments, each lasting approximately one week, two different groups of three animals each showed a variable burrow occupancy and a nocturnal displacement under a standard photoperiod regime (12 h light:12 h dark, measured using the RFID method. Similar results were obtained with the video imaging. Our implemented RFID system was therefore capable of efficiently tracking the tested organisms and has a good potential for use on a wide variety of other marine organisms of commercial, aquaculture, and ecological interest.

47 CFR 25.206 - Station identification.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Station identification. 25.206 Section 25.206 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS... identification is waived for all radio stations licensed under this part with the exception of satellite uplinks...

FUNDAMENTALS OF RADIO CONTROL OF FAULTY EQUIPMENT AND ICE REGIMES ARC ABUSES OF POWER COLLECTION

Directory of Open Access Journals (Sweden)

Yu. I. Zharkov

2009-03-01

Full Text Available The principles of construction and the structure of radio system for detecting damaged current collectors and glaze-ice regimes on arc breaking of current collection as well as the peculiarities of received radio signals and the basics of their identification are presented.

Ethical considerations and proposed guidelines for the use of radio frequency identification: especially concerning its use for promoting public safety and national security.

Science.gov (United States)

Anderson, Amber McKee; Labay, Vladimir

2006-04-01

Radio Frequency Identification (RFID) is quickly growing in its applications. A variety of uses for the technology are beginning to be developed, including chips which can be used in identification cards, in individual items, and for human applications, allowing a chip to be embedded under the skin. Such chips could provide numerous benefits ranging from day-to-day convenience to the increased ability of the federal government to adequately ensure the safety of its citizens. However, there are also valid concerns about the potential of this technology to infringe on privacy, creating fears of a surveillance society. These are concerns that must be addressed quickly, with sensitivity to individual interests and societal welfare, allowing humanity to reap the benefits of convenience and safety without paying an unacceptable price in the loss of privacy.

The host galaxy of a fast radio burst.

Science.gov (United States)

Keane, E F; Johnston, S; Bhandari, S; Barr, E; Bhat, N D R; Burgay, M; Caleb, M; Flynn, C; Jameson, A; Kramer, M; Petroff, E; Possenti, A; van Straten, W; Bailes, M; Burke-Spolaor, S; Eatough, R P; Stappers, B W; Totani, T; Honma, M; Furusawa, H; Hattori, T; Morokuma, T; Niino, Y; Sugai, H; Terai, T; Tominaga, N; Yamasaki, S; Yasuda, N; Allen, R; Cooke, J; Jencson, J; Kasliwal, M M; Kaplan, D L; Tingay, S J; Williams, A; Wayth, R; Chandra, P; Perrodin, D; Berezina, M; Mickaliger, M; Bassa, C

2016-02-25

In recent years, millisecond-duration radio signals originating in distant galaxies appear to have been discovered in the so-called fast radio bursts. These signals are dispersed according to a precise physical law and this dispersion is a key observable quantity, which, in tandem with a redshift measurement, can be used for fundamental physical investigations. Every fast radio burst has a dispersion measurement, but none before now have had a redshift measurement, because of the difficulty in pinpointing their celestial coordinates. Here we report the discovery of a fast radio burst and the identification of a fading radio transient lasting ~6 days after the event, which we use to identify the host galaxy; we measure the galaxy's redshift to be z = 0.492 ± 0.008. The dispersion measure and redshift, in combination, provide a direct measurement of the cosmic density of ionized baryons in the intergalactic medium of ΩIGM = 4.9 ± 1.3 per cent, in agreement with the expectation from the Wilkinson Microwave Anisotropy Probe, and including all of the so-called 'missing baryons'. The ~6-day radio transient is largely consistent with the radio afterglow of a short γ-ray burst, and its existence and timescale do not support progenitor models such as giant pulses from pulsars, and supernovae. This contrasts with the interpretation of another recently discovered fast radio burst, suggesting that there are at least two classes of bursts.

Exposure calculations for the FRG isotopic heat source project environmental assessment

International Nuclear Information System (INIS)

Metcalf, I.L.

1997-01-01

The report documents the maximum exposure for transfer of the Federal Republic of Germany (FRG) Isotopic Heat Sources from the 324 Building and placed in interim storage at the Central Waste Complex (CWC). These results are to be reported in the Environmental Assessment DOE-EA- 1 21 1

Surveys of radio sources at 5 GHz

International Nuclear Information System (INIS)

Pauliny-Toth, I.I.K.

1977-01-01

A number of surveys have been carried out at a frequency of 5 GHz at the National Radio Astronomy Observatory (NRAO) and at the Max-Planck-Institut fuer Radioastronomy (MPIFR) with the aim of determining the number-flux density relation for the sources detected and also of obtaining their radio spectra and optical identifications. The surveys fall into two categories: first, the strong source (S) surveys which are intended in due course to cover the whole northern sky and to be complete above a flux density of about 0.6 Jy; second, surveys of limited areas of sky down to lower levels of the flux density. (Auth.)

Benefits and Barriers of Implementation and Utilization of Radio-Frequency Identification (RFID) Systems in Transfusion Medicine.

Science.gov (United States)

Coustasse, Alberto; Cunningham, Brian; Deslich, Stacie; Willson, Eric; Meadows, Pamela

2015-01-01

Radio-frequency identification (RFID) technology is used by hospital supply chains to track medical products and monitor inventories. Hospitals have also begun incorporating RFID technology as part of their transfusion processes. The purpose of this review was to analyze how healthcare organization supply chains can benefit from the utilization of RFID systems in transfusion service departments. The methodology for this study was a literature review following the steps of a systematic review with a total of 52 sources referenced. RFID technology is used to manage and track blood products from the initial donor phlebotomy to final disposition or product transfusion. RFID-enabled transfusion practices have successfully increased provider productivity and product quality through work-time reduction and error reduction. Findings of this research study suggest that RFID has provided improvements in quality of care and efficiency, while initial costs, security, and privacy appear to be the principal barriers to adoption.

Extended radio sources in the cluster environment

International Nuclear Information System (INIS)

Burns, J.O. Jr.

1979-01-01

Extended radio galaxies that lie in rich and poor clusters were studied. A sample of 3CR and 4C radio sources that spatially coincide with poor Zwicky clusters of galaxies was observed to obtain accurate positions and flux densities. Then interferometer observations at a resolution of approx. = 10 arcsec were performed on the sample. The resulting maps were used to determine the nature of the extended source structure, to make secure optical identifications, and to eliminate possible background sources. The results suggest that the environments around both classical double and head-tail radio sources are similar in rich and poor clusters. The majority of the poor cluster sources exhibit some signs of morphological distortion (i.e., head-tails) indicative of dynamic interaction with a relatively dense intracluster medium. A large fraction (60 to 100%) of all radio sources appear to be members of clusters of galaxies if one includes both poor and rich cluster sources. Detailed total intensity and polarization observations for a more restricted sample of two classical double sources and nine head-tail galaxies were also performed. The purpose was to examine the spatial distributions of spectral index and polarization. Thin streams of radio emission appear to connect the nuclear radio-point components to the more extended structures in the head-tail galaxies. It is suggested that a non-relativistic plasma beam can explain both the appearance of the thin streams and larger-scale structure as well as the energy needed to generate the observed radio emission. The rich and poor radio cluster samples are combined to investigate the relationship between source morphology and the scale sizes of clustering. There is some indication that a large fraction of radio sources, including those in these samples, are in superclusters of galaxies

Long range ultra-high frequency (UHF) radio frequency identification (RFID) antenna design

Science.gov (United States)

Reynolds, Nathan D.

There is an ever-increasing demand for radio frequency identification (RFID) tags that are passive, long range, and mountable on multiple surfaces. Currently, RFID technology is utilized in numerous applications such as supply chain management, access control, and public transportation. With the combination of sensory systems in recent years, the applications of RFID technology have been extended beyond tracking and identifying. This extension includes applications such as environmental monitoring and healthcare applications. The available sensory systems usually operate in the medium or high frequency bands and have a low read range. However, the range limitations of these systems are being overcome by the development of RFID sensors focused on utilizing tags in the ultra-high frequency (UHF) band. Generally, RFID tags have to be mounted to the object that is being identified. Often the objects requiring identification are metallic. The inherent properties of metallic objects have substantial effects on nearby electromagnetic radiation; therefore, the operation of the tag antenna is affected when mounted on a metallic surface. This outlines one of the most challenging problems for RFID systems today: the optimization of tag antenna performance in a complex environment. In this research, a novel UHF RFID tag antenna, which has a low profile, long range, and is mountable on metallic surfaces, is designed analytically and simulated using a 3-D electromagnetic simulator, ANSYS HFSS. A microstrip patch antenna is selected as the antenna structure, as patch antennas are low profile and suitable for mounting on metallic surfaces. Matching and theoretical models of the microstrip patch antenna are investigated. Once matching and theory of a microstrip patch antenna is thoroughly understood, a unique design technique using electromagnetic band gap (EBG) structures is explored. This research shows that the utilization of an EBG structure in the patch antenna design yields

Assessment of risks for employees of France Telecom regarding overvoltage arresters containing radio-elements

International Nuclear Information System (INIS)

Thomassin, A.; Metz, C.; Rannou, A.

2010-01-01

As a great number of overvoltage arresters used by France Telecom to protect its telecommunication network against disturbing voltages (notably lightning) contain radio-elements, this report aims at assessing dose levels and associated risks for employees exposed to radioactive overvoltage arrester when setting them up, exploiting installations containing such arresters, or when removing them. After a presentation of these devices, a modelling of activities and geometries is proposed, as well as computation tools. Different scenarios and exposure situations are considered. As far as risks are concerned, after a recall on cancers and ionizing radiation, and on the exposure of France Telecom employees, the report comments the knowledge on radio-induced cancers; notably breast cancer, skin cancer, and mouth and pharynx cancers

47 CFR 80.99 - Radiotelegraph station identification.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Radiotelegraph station identification. 80.99 Section 80.99 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO...-General § 80.99 Radiotelegraph station identification. This section applies to coast, ship and survival...

Compound-Specific Isotope Analyses to Assess TCE Biodegradation in a Fractured Dolomitic Aquifer.

Science.gov (United States)

Clark, Justin A; Stotler, Randy L; Frape, Shaun K; Illman, Walter A

2017-01-01

The potential for trichloroethene (TCE) biodegradation in a fractured dolomite aquifer at a former chemical disposal site in Smithville, Ontario, Canada, is assessed using chemical analysis and TCE and cis-DCE compound-specific isotope analysis of carbon and chlorine collected over a 16-month period. Groundwater redox conditions change from suboxic to much more reducing environments within and around the plume, indicating that oxidation of organic contaminants and degradation products is occurring at the study site. TCE and cis-DCE were observed in 13 of 14 wells sampled. VC, ethene, and/or ethane were also observed in ten wells, indicating that partial/full dechlorination has occurred. Chlorine isotopic values (δ 37 Cl) range between 1.39 to 4.69‰ SMOC for TCE, and 3.57 to 13.86‰ SMOC for cis-DCE. Carbon isotopic values range between -28.9 and -20.7‰ VPDB for TCE, and -26.5 and -11.8‰ VPDB for cis-DCE. In most wells, isotopic values remained steady over the 15-month study. Isotopic enrichment from TCE to cis-DCE varied between 0 and 13‰ for carbon and 1 and 4‰ for chlorine. Calculated chlorine-carbon isotopic enrichment ratios (ϵ Cl /ϵ C ) were 0.18 for TCE and 0.69 for cis-DCE. Combined, isotopic and chemical data indicate very little dechlorination is occurring near the source zone, but suggest bacterially mediated degradation is occurring closer to the edges of the plume. © 2016, National Ground Water Association.

Radio-isotopic apparatus for analyzing low atomic number elements by fluorescence

International Nuclear Information System (INIS)

Robert, Andre; Martinelli, Pierre; Daniel, Georges; Laflotte, Jean-Luc

1969-10-01

An apparatus is described for analyzing light elements of atomic number between 6 and 24 by X-fluorescence. The samples are excited by means of X or α isotopic sources. Various examples of analytical determinations are given. (author) [fr

Characterization and evaluation of a modified local lymph node assay using ATP content as a non-radio isotopic endpoint.

Science.gov (United States)

Idehara, Kenji; Yamagishi, Gaku; Yamashita, Kunihiko; Ito, Michio

2008-01-01

The murine local lymph node assay (LLNA) is an accepted and widely used method for assessing the skin-sensitizing potential of chemicals. Here, we describe a non-radio isotopic modified LLNA in which adenosine triphosphate (ATP) content is used as an endpoint instead of radioisotope (RI); the method is termed LLNA modified by Daicel based on ATP content (LLNA-DA). Groups of female CBA/JNCrlj mice were treated topically on the dorsum of both ears with test chemicals or a vehicle control on days 1, 2, and 3; an additional fourth application was conducted on day 7. Pretreatment with 1% sodium lauryl sulfate solution was performed 1 h before each application. On day 8, the amount of ATP in the draining auricular lymph nodes was measured as an alternative endpoint by the luciferin-luciferase assay in terms of bioluminescence (relative light units, RLU). A stimulation index (SI) relative to the concurrent vehicle control was derived based on the RLU value, and an SI of 3 was set as the cut-off value. Using the LLNA-DA method, 31 chemicals were tested and the results were compared with those of other test methods. The accuracy of LLNA-DA vs LLNA, guinea pig tests, and human tests was 93% (28/30), 80% (20/25), and 79% (15/19), respectively. The estimated concentration (EC) 3 value was calculated and compared with that of the original LLNA. It was found that the EC3 values obtained by LLNA-DA were almost equal to those obtained by the original LLNA. The SI value based on ATP content is similar to that of the original LLNA as a result of the modifications in the chemical treatment procedure, which contribute to improving the SI value. It is concluded that LLNA-DA is a promising non-RI alternative method for evaluating the skin-sensitizing potential of chemicals.

Application of ICP-MS and AMS for determination of Pu- and U-isotope ratios for source identification

Energy Technology Data Exchange (ETDEWEB)

Skipperud, L. (Norwegian Univ. of Life Sciences, Isotope Lab.. Dept. of Plant and Environmental Sciences, AAs (Norway))

2010-03-15

the Pu-240/Pu-239 ratio offers a reliable way of distinguishing weapon's grade sources from global fallout. Since these two isotopes are not separated easily by conventional alfa spectrometry techniques, mass spectrometry is required for an assessment of the isotope ratios. Because of the low levels of plutonium in the Arctic area, plutonium concentrations and 240/239 ratios have been determined using accelerator mass spectrometry (AMS), which has proved a useful and reliable method for analysis of plutonium. ICP-MS has proven to be a good tool together with traditional alfa spectrometry when it comes to analysing plutonium and its isotope ratios in more contaminated areas. (author)

Software ASPRO-NUC. Gamma-ray spectrometry, routine NAA, isotope identification and data management

International Nuclear Information System (INIS)

Kolotov, V.P.; Atrashkevich, V.V.

1995-01-01

The software ASPRO-NUC is based on new improved algorithms suggested and tested in the laboratory and intended for routine analysis. The package consists of the program ASPRO for gamma-ray spectra processing (peak search, multiplets deconvolution by means of method of moments, computation of correction coefficient for geometry and material of radioactive source), a program for isotope identification and a program for NAA by means of relative standardization. All output information is loaded into a data base (Paradox v.3.5 format) for supporting of queries, creation of reports, planning of routine analysis, estimation of expenses, supporting of network of analytical survey, etc. The ASPRO-NUC package also includes a vast nuclear data base containing evaluated decay and activation data (reactor, generator of fast neutrons, Cf-252 source). The data base environment allows for easy integration of a gamma spectrometer into a flexible information shell and the creation of a logical system for information management. (author) 15 refs.; 2 figs.; 2 tabs

Performance Assessment of the CapitalBio Mycobacterium Identification Array System for Identification of Mycobacteria

Science.gov (United States)

Liu, Jingbo; Yan, Zihe; Han, Min; Han, Zhijun; Jin, Lingjie; Zhao, Yanlin

2012-01-01

The CapitalBio Mycobacterium identification microarray system is a rapid system for the detection of Mycobacterium tuberculosis. The performance of this system was assessed with 24 reference strains, 486 Mycobacterium tuberculosis clinical isolates, and 40 clinical samples and then compared to the “gold standard” of DNA sequencing. The CapitalBio Mycobacterium identification microarray system showed highly concordant identification results of 100% and 98.4% for Mycobacterium tuberculosis complex (MTC) and nontuberculous mycobacteria (NTM), respectively. The sensitivity and specificity of the CapitalBio Mycobacterium identification array for identification of Mycobacterium tuberculosis isolates were 99.6% and 100%, respectively, for direct detection and identification of clinical samples, and the overall sensitivity was 52.5%. It was 100% for sputum, 16.7% for pleural fluid, and 10% for bronchoalveolar lavage fluid, respectively. The total assay was completed in 6 h, including DNA extraction, PCR, and hybridization. The results of this study confirm the utility of this system for the rapid identification of mycobacteria and suggest that the CapitalBio Mycobacterium identification array is a molecular diagnostic technique with high sensitivity and specificity that has the capacity to quickly identify most mycobacteria. PMID:22090408

Isotopic studies in soil and plant nutrition

International Nuclear Information System (INIS)

Pasricha, N.S.

2001-01-01

One of the most important peaceful applications of isotopes is in research for the enhancement of our understanding for increased crop production and better management of resources with higher economic efficiency and environmental safety. Nuclear techniques helped in generating useful information on such aspects as use-efficiency of fertilizer nutrients, quantifying their losses from soil and their biological transformations. Such information was, hitherto, obtained indirectly by conventional methods. Radio and stable isotopes have also been successfully employed for getting information in such diverse fields as soil erosion, turnover of soil organic matter, pesticide retention in soil ground water recharge etc. The property of 137 Cs adhering tightly to certain exchange surface in soil and its chemically inert nature has made it a useful tool for soil erosion studies. In this paper, applications of isotopes in the research and other such studies as degradation, movement and retention of pesticides, movement of nitrate in soil, biological and ammoniacal nitrogen fixation in soil is discussed

Mathematical models for estimating radio channels utilization when ...

African Journals Online (AJOL)

Definition of the radio channel utilization indicator is given. Mathematical models for radio channels utilization assessment by real-time flows transfer in the wireless self-organized network are presented. Estimated experiments results according to the average radio channel utilization productivity with and without buffering of ...

Radio Frequency Interference Mitigation

Science.gov (United States)

An, T.; Chen, X.; Mohan, P.; Lao, B. Q.

2017-09-01

The observational facilities of radio astronomy keep constant upgrades and developments to achieve better capabilities including increasing the time of the data recording and frequency resolutions, and increasing the receiving and recording bandwidth. However in contrast, only a limited spectrum resource has been allocated to radio astronomy by the International Telecommunication Union, resulting in that the radio observational instrumentations are inevitably exposed to undesirable radio frequency interference (RFI) signals which originate mainly from the terrestrial human activity and are becoming stronger with time. RFIs degrade the quality of data and even lead to invalid data. The impact of RFIs on scientific outcome becomes more and more serious. In this article, the requirement for RFI mitigation is motivated, and the RFI characteristics, mitigation techniques, and strategies are reviewed. The mitigation strategies adopted at some representative observatories, telescopes, and arrays are also introduced. The advantages and shortcomings of the four classes of RFI mitigation strategies are discussed and presented, applicable at the connected causal stages: preventive, pre-detection, pre-correlation, and post-correlation. The proper identification and flagging of RFI is the key to the reduction of data loss and improvement in data quality, and is also the ultimate goal of developing RFI mitigation technique. This can be achieved through a strategy involving a combination of the discussed techniques in stages. The recent advances in the high speed digital signal processing and high performance computing allow for performing RFI excision of the large data volumes generated from large telescopes or arrays in both real time and offline modes, aiding the proposed strategy.

EGRET Unidentified Source Radio Observations and Performance of Receiver Gain Calibration

International Nuclear Information System (INIS)

Niinuma, Kotaro; Asuma, Kuniyuki; Kuniyoshi, Masaya; Matsumura, Nobuo; Takefuji, Kazuhiro; Kida, Sumiko; Takeuchi, Akihiko; Ichikawa, Hajime; Sawano, Akihiro; Yoshimura, Naoya; Suzuki, Shigehiro; Nakamura, Ryosuke; Nakayama, Yu; Daishido, Tsuneaki

2006-01-01

Last year, we have developed the receiver gain calibration system by using Johnson-Nyquist noise, for accuracy flux measurement, because we have been starting radio identification program of transient radio sources, blazars and radio counterpart of The Energetic Gamma Ray Experiment Telescope (EGRET) unidentified γ-ray sources in Waseda Nasu Pulsar Observatory. It is shown that there are a few low correlation data between receiver gain and ambient temperature around receiver for anything troubles of receiver, because we can detect gain and ambient temperature through a day by developed system. Estimated fluctuations of daily data of steady sources decrease by removing low correlation data before analysing. As the result of our analysis by using above system, radio counterpart of EGRET identified source showed fading light-curve for a week

Space Telecommunications Radio System STRS Cognitive Radio

Science.gov (United States)

Briones, Janette C.; Handler, Louis M.

2013-01-01

Radios today are evolving from awareness toward cognition. A software defined radio (SDR) provides the most capability for integrating autonomic decision making ability and allows the incremental evolution toward a cognitive radio. This cognitive radio technology will impact NASA space communications in areas such as spectrum utilization, interoperability, network operations, and radio resource management over a wide range of operating conditions. NASAs cognitive radio will build upon the infrastructure being developed by Space Telecommunication Radio System (STRS) SDR technology. This paper explores the feasibility of inserting cognitive capabilities in the NASA STRS architecture and the interfaces between the cognitive engine and the STRS radio. The STRS architecture defines methods that can inform the cognitive engine about the radio environment so that the cognitive engine can learn autonomously from experience, and take appropriate actions to adapt the radio operating characteristics and optimize performance.

Graphene screen-printed radio-frequency identification devices on flexible substrates

NARCIS (Netherlands)

Arapov, K.; Jaakkola, K.; Ermolov, V.; Bex, G.; Rubingh, E.; Haque, S.; Sandberg, H.; Abbel, R.; de With, G.; Friedrich, H.

2016-01-01

Despite the great promise of printed flexible electronics from 2D crystals, and especially graphene, few scalable applications have been reported so far that can be termed roll-to-roll compatible. Here we combine screen printed graphene with photonic annealing to realize radio-frequency

Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system.

Science.gov (United States)

Hannan, M A; Arebey, Maher; Begum, R A; Basri, Hassan

2011-12-01

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity. Copyright © 2011 Elsevier Ltd. All rights reserved.

Frederick Soddy's invention of isotopes in 1911

International Nuclear Information System (INIS)

Attas, M.

2011-01-01

This paper describes the history of the invention of isotopes by Frederick Soddy in 1911. The idea of the nucleus had been conceived by a physicist, Ernest Rutherford. But it took a chemist, Frederick Soddy, to make chemical sense of the zoo of recently discovered radioactive elements, by inventing the idea of isotopes. He showed how one radioactive substance transformed itself spontaneously into another, following mathematical laws of exponential growth and decay. In his book The Chemistry of the Radio-Elements, Soddy compiled complete descriptions of the physical and chemical properties of each of the radioactive substances. He organized their sequences of transmutations by the.similarities in their chemical properties, so that the emanations, for example, were all side-by-side in a chart.

UTag: Long-range Ultra-wideband Passive Radio Frequency Tags

Energy Technology Data Exchange (ETDEWEB)

Dowla, F

2007-03-14

Long-range, ultra-wideband (UWB), passive radio frequency (RF) tags are key components in Radio Frequency IDentification (RFID) system that will revolutionize inventory control and tracking applications. Unlike conventional, battery-operated (active) RFID tags, LLNL's small UWB tags, called 'UTag', operate at long range (up to 20 meters) in harsh, cluttered environments. Because they are battery-less (that is, passive), they have practically infinite lifetimes without human intervention, and they are lower in cost to manufacture and maintain than active RFID tags. These robust, energy-efficient passive tags are remotely powered by UWB radio signals, which are much more difficult to detect, intercept, and jam than conventional narrowband frequencies. The features of long range, battery-less, and low cost give UTag significant advantage over other existing RFID tags.

Evaluating the Readability of Radio Frequency Identification for Construction Materials

Directory of Open Access Journals (Sweden)

Younghan Jung

2017-01-01

Full Text Available Radio Frequency Identification (RFID, which was originally introduced to improve material handling and speed production as part of supply chain management, has become a globally accepted technology that is now applied on many construction sites to facilitate real-time information visibility and traceability. This paper describes a senior undergraduate project for a Construction Management (CM program that was specifically designed to give the students a greater insight into technical research in the CM area. The students were asked to determine whether it would be possible to utilize an RFID system capable of tracking tagged equipment, personnel and materials across an entire construction site. This project required them to set up an experimental program, execute a series of experiments, analyze the results and summarize them in a report. The readability test was performed using an active Ultra-High frequency (UHF, 433.92 MHz RFID system with various construction materials, including metal, concrete, wood, plastic, and aluminum. The readability distance distances are measured for each of the six scenarios. The distance at which a tag was readable with no obstructions was found to be an average of 133.9m based on three measurements, with a standard deviation of 3.9m. This result confirms the manufacturer’s claimed distance of 137.2m. The RFID tag embedded under 50.8mm of concrete was readable for an average distance of only 12.2m, the shortest readable distance of any of the scenarios tested. At the end of the semester, faculty advisors held an open discussion session to gather feedback and elicit the students’ reflections on their research experiences, revealing that the students’ overall impressions of their undergraduate research had positively affected their postgraduate education plans.

Isotopic analysis of bullet lead samples

International Nuclear Information System (INIS)

Sankar Das, M.; Venkatasubramanian, V.S.; Sreenivas, K.

1976-01-01

The possibility of using the isotopic composition of lead for the identification of bullet lead is investigated. Lead from several spent bullets were converted to lead sulphide and analysed for the isotopic abundances using an MS-7 mass spectrometer. The abundances are measured relative to that for Pb 204 was too small to permit differentiation, while the range of variation of Pb 206 and Pb 207 and the better precision in their analyses permitted differentiating samples from one another. The correlation among the samples examined has been pointed out. The method is complementary to characterisation of bullet leads by the trace element composition. The possibility of using isotopically enriched lead for tagging bullet lead is pointed out. (author)

Mass measurements on radioactive isotopes using the ISOLTRAP spectrometer

CERN Document Server

Dilling, J; Kluge, H J; Kohl, A; Lamour, E; Marx, G; Schwarz, S C; Bollen, G; Kellerbauer, A G; Moore, R B; Henry, S

2000-01-01

ISOLTRAP is a Penning trap mass spectrometer installed at the on line isotope separator ISOLDE at CERN. Direct measurements of the masses of short lived radio isotopes are performed using the existing triple trap system. This consists of three electromagnetic traps in tandem: a Paul trap to accumulate and bunch the 60 keV dc beam, a Penning trap for cooling and isobar separation, and a precision Penning trap for the determination of the masses by cyclotron resonance. Measurements of masses of unknown mercury isotopes and in the vicinity of doubly magic /sup 208/Pb are presented, all with an accuracy of delta m/m approximately=1*10/sup -7/. Developments to replace the Paul trap by a radiofrequency quadrupole ion guide system to increase the collection efficiency are presently under way and the status is presented. (10 refs).

Identification of sources of lead exposure in French children by lead isotope analysis: a cross-sectional study

Directory of Open Access Journals (Sweden)

Lucas Jean-Paul

2011-08-01

Full Text Available Abstract Background The amount of lead in the environment has decreased significantly in recent years, and so did exposure. However, there is no known safe exposure level and, therefore, the exposure of children to lead, although low, remains a major public health issue. With the lower levels of exposure, it is becoming more difficult to identify lead sources and new approaches may be required for preventive action. This study assessed the usefulness of lead isotope ratios for identifying sources of lead using data from a nationwide sample of French children aged from six months to six years with blood lead levels ≥25 μg/L. Methods Blood samples were taken from 125 children, representing about 600,000 French children; environmental samples were taken from their homes and personal information was collected. Lead isotope ratios were determined using quadrupole ICP-MS (inductively coupled plasma - mass spectrometry and the isotopic signatures of potential sources of exposure were matched with those of blood in order to identify the most likely sources. Results In addition to the interpretation of lead concentrations, lead isotope ratios were potentially of use for 57% of children aged from six months to six years with blood lead level ≥ 25 μg/L (7% of overall children in France, about 332,000 children, with at least one potential source of lead and sufficiently well discriminated lead isotope ratios. Lead isotope ratios revealed a single suspected source of exposure for 32% of the subjects and were able to eliminate at least one unlikely source of exposure for 30% of the children. Conclusions In France, lead isotope ratios could provide valuable additional information in about a third of routine environmental investigations.

Programme of identification and assessment of risks at Ukrainian milk processing factories

Directory of Open Access Journals (Sweden)

Shvets Victor H.

2014-01-01

Full Text Available The goal of the article lies in the study of possible risks at a milk processing factory and their identification and assessment by relevant criteria and creation of the efficient risk management system with the help of methods of reacting to them. The article considers the economic risk of production processes at a milk processing factory and control of their limit, studies identification and assessment of possible risks in accordance with the international practice pursuant to the COSO concept, and analyses methods of identification of assessment of the risk level and relevant methods of reacting to them. The authors offer the milk processing factory risk identification and assessment programme, which would ensure timely detection of the most important risks, which require relevant reactions, and development of new methods of internal control and recommendations on improvement of the risk assessment system for ensuring efficient activity of a factory in general.

Geochemical and isotopic signatures for the identification of ...

Indian Academy of Sciences (India)

In case of stable isotopes of hydrogen and oxygen in water samples, the reference material is a stan- dard ocean ..... Aquifers – Modeling, Monitoring and Management,. Morocco .... Israel: Its bearing on the water crisis in the country;. J. Hydrol.

Transportation of medical isotopes

International Nuclear Information System (INIS)

Nielsen, D.L.

1997-01-01

A Draft Technical Information Document (HNF-1855) is being prepared to evaluate proposed interim tritium and medical isotope production at the Fast Flux Test Facility (FFTF). This assessment examines the potential health and safety impacts of transportation operations associated with the production of medical isotopes. Incident-free and accidental impacts are assessed using bounding source terms for the shipment of nonradiological target materials to the Hanford Site, the shipment of irradiated targets from the FFTF to the 325 Building, and the shipment of medical isotope products from the 325 Building to medical distributors. The health and safety consequences to workers and the public from the incident-free transportation of targets and isotope products would be within acceptable levels. For transportation accidents, risks to works and the public also would be within acceptable levels. This assessment is based on best information available at this time. As the medical isotope program matures, this analysis will be revised, if necessary, to support development of a final revision to the Technical Information Document

Transportation of medical isotopes

Energy Technology Data Exchange (ETDEWEB)

Nielsen, D.L.

1997-11-19

A Draft Technical Information Document (HNF-1855) is being prepared to evaluate proposed interim tritium and medical isotope production at the Fast Flux Test Facility (FFTF). This assessment examines the potential health and safety impacts of transportation operations associated with the production of medical isotopes. Incident-free and accidental impacts are assessed using bounding source terms for the shipment of nonradiological target materials to the Hanford Site, the shipment of irradiated targets from the FFTF to the 325 Building, and the shipment of medical isotope products from the 325 Building to medical distributors. The health and safety consequences to workers and the public from the incident-free transportation of targets and isotope products would be within acceptable levels. For transportation accidents, risks to works and the public also would be within acceptable levels. This assessment is based on best information available at this time. As the medical isotope program matures, this analysis will be revised, if necessary, to support development of a final revision to the Technical Information Document.

Assessment of primary production in a eutrophic lake from carbon and nitrogen isotope ratios of a carnivorous fish

International Nuclear Information System (INIS)

Yoshioka, Takahito

1991-01-01

The carbon and nitrogen isotope ratios of Hypomesus transpacificus (a pond smelt) in a eutrophic lake, Lake Suwa, were measured from April to September in 1986 and 1987. The differences in the isotope ratios between these two years were observed. The stable isotopes were transferred from phytoplankton to zooplankton and pond smelt, associated with organic matters. Therefore, the difference in the isotope ratios in two years seemed to reflect the differences of the proceeding of primary production. It was suggested that the carbon and nitrogen isotope ratios of animal, whose trophic level is far from primary producer, can be the qualitative indicators for assessing the primary production in a lake ecosystem. (author)

Identification and assessment of hazardous compounds in drinking water.

Science.gov (United States)

Fawell, J K; Fielding, M

1985-12-01

The identification of organic chemicals in drinking water and their assessment in terms of potential hazardous effects are two very different but closely associated tasks. In relation to both continuous low-level background contamination and specific, often high-level, contamination due to pollution incidents, the identification of contaminants is a pre-requisite to evaluation of significant hazards. Even in the case of the rapidly developing short-term bio-assays which are applied to water to indicate a potential genotoxic hazard (for example Ames tests), identification of the active chemicals is becoming a major factor in the further assessment of the response. Techniques for the identification of low concentrations of organic chemicals in drinking water have developed remarkably since the early 1970s and methods based upon gas chromatography-mass spectrometry (GC-MS) have revolutionised qualitative analysis of water. Such techniques are limited to "volatile" chemicals and these usually constitute a small fraction of the total organic material in water. However, in recent years there have been promising developments in techniques for "non-volatile" chemicals in water. Such techniques include combined high-performance liquid chromatography-mass spectrometry (HPLC-MS) and a variety of MS methods, involving, for example, field desorption, fast atom bombardment and thermospray ionisation techniques. In the paper identification techniques in general are reviewed and likely future developments outlined. The assessment of hazards associated with chemicals identified in drinking and related waters usually centres upon toxicology - an applied science which involves numerous disciplines. The paper examines the toxicological information needed, the quality and deployment of such information and discusses future research needs. Application of short-term bio-assays to drinking water is a developing area and one which is closely involved with, and to some extent dependent on

Increasing Accuracy: A New Design and Algorithm for Automatically Measuring Weights, Travel Direction and Radio Frequency Identification (RFID) of Penguins.

Science.gov (United States)

Afanasyev, Vsevolod; Buldyrev, Sergey V; Dunn, Michael J; Robst, Jeremy; Preston, Mark; Bremner, Steve F; Briggs, Dirk R; Brown, Ruth; Adlard, Stacey; Peat, Helen J

2015-01-01

A fully automated weighbridge using a new algorithm and mechanics integrated with a Radio Frequency Identification System is described. It is currently in use collecting data on Macaroni penguins (Eudyptes chrysolophus) at Bird Island, South Georgia. The technology allows researchers to collect very large, highly accurate datasets of both penguin weight and direction of their travel into or out of a breeding colony, providing important contributory information to help understand penguin breeding success, reproductive output and availability of prey. Reliable discrimination between single and multiple penguin crossings is demonstrated. Passive radio frequency tags implanted into penguins allow researchers to match weight and trip direction to individual birds. Low unit and operation costs, low maintenance needs, simple operator requirements and accurate time stamping of every record are all important features of this type of weighbridge, as is its proven ability to operate 24 hours a day throughout a breeding season, regardless of temperature or weather conditions. Users are able to define required levels of accuracy by adjusting filters and raw data are automatically recorded and stored allowing for a range of processing options. This paper presents the underlying principles, design specification and system description, provides evidence of the weighbridge's accurate performance and demonstrates how its design is a significant improvement on existing systems.

Identification and spectrophotometry of faint southern radio galaxies

International Nuclear Information System (INIS)

Spinrad, H.; Kron, R.G.; Hunstead, R.W.

1980-01-01

We have observed a mixed sample of southern radio sources, identified on the Palomar sky survey or on previous direct plates taken with medium-aperture reflectors. At CIO we obtained a few deep 4m photographs and SIT spectrophotometry for redshift and continuum-color measurement. Almost all our sources were faint galaxies; the largest redshift measured was for 3C 275, with z=0.480. The ultraviolet continuum of PKS 0400--643, a ''thermal'' galaxy with z=0.476, closely resembles that of 3C 295 and shows some color evolution in U--B compared to nearby giant ellipticals

Using stable isotopes to investigate individual diet specialization in California sea otters (Enhydra lutris nereis)

Science.gov (United States)

Newsome, S.D.; Tinker, M.T.; Monson, Daniel H.; Oftedal, O.T.; Ralls, K.; Staedler, M.M.; Fogel, M.L.; Estes, J.A.

2009-01-01

Differences in diet composition among conspecifics (dietary specialization) have been documented across a broad range of taxonomic groups and habitats, and such variation at the individual level is increasingly recognized as an important component of diversity in trophic interactions. Accurate identification of individual dietary specialization, however, requires longitudinal dietary records that are labor-intensive and cost-prohibitive to obtain for many species. Here we explore the use of stable isotopes (δ13C and δ15N) as a promising technique for detecting and quantifying patterns of individual dietary specialization. Southern sea otters (Enhydra lutris nereis) offer a unique opportunity for testing this approach because (1) they consume a wide variety of prey that span multiple trophic levels, habitats, and ecologically defined functional groups; and (2) individual diet specialization can be validated with existing observational data. We analyzed the isotopic composition of sea otter vibrissae (n = 31) in order to characterize inter- and intra-individual variation in sea otter diets at Monterey Bay, California, USA. At the population level, sea otters showed substantial variation in both δ13C and δ15N values, occupying nearly all of the “isotopic space” created by the diversity of isotopic signatures of potential prey taxa. Most of the variation in sea otter vibrissae was accounted for by differences between individuals, with much less contributed by within-individual variation. A majority of sea otters (∼80%) showed relatively little temporal variability in isotopic composition, suggesting that the proportional composition of most individuals' diets is relatively constant over time; a few individuals (∼20%) exhibited a high degree of intra-vibrissa isotopic variability, suggesting seasonal shifts in diet composition. These results and our interpretation of them were supported by long-term observational data on the diets of radio-tagged sea otters

Assessment of Bacterial Degradation of Aromatic Hydrocarbons in the Environment by Analysis of Stable Carbon Isotope Fractionation

International Nuclear Information System (INIS)

Meckenstock, Rainer U.; Morasch, Barbara; Kaestner, Matthias; Vieth, Andrea; Richnow, Hans Hermann

2002-01-01

13 C/ 12 C stable carbon isotope fractionation was used to assess biodegradation in contaminated aquifers with toluene as a model compound. Different strains of anaerobic bacteria (Thauera aromatica, Geobacter metallireducens, and the sulfate-reducing strain TRM1) showed consistent 13 C/ 12 C carbon isotope fractionation with fractionation factors between αC = 1.0017 and 1.0018. In contrast, three cultures of aerobic organisms, using different mono- and dioxygenase enzyme systems to initiate toluene degradation, showed variable isotope fractionation factors of αC = 1.0027 (Pseudomonasputida strain mt-2), αC = 1.0011 (Ralstonia picketii), andαC = 1.0004 (Pseudomonas putida strain F1). The great variability of isotope fractionation between different aerobic bacterial strains suggests that interpretation of isotope data in oxic habitats can only be qualitative. A soil column was run as a model system for contaminated aquifers with toluene as the carbon source and sulfate as the electron acceptor and samples were taken at different ports along the column. Microbial toluene degradation was calculated based on the 13 C/ 12 C isotope fractionation factors of the batch culture experiments together with the observed 13 C/ 12 C isotope shifts of the residual toluene fractions. The calculated percentage of biodegradation, B, correlated well with the decreasing toluene concentrations at the sampling ports and indicated the increasing extent of biodegradation along the column. The theoretical toluene concentrations as calculated based on the isotope values matched the measured concentrations at the different sampling ports indicating that the Rayleigh equation can be used to calculate biodegradation in quasi closed systems based on measured isotope shifts. A similar attempt was performed to assess toluene degradation in a contaminated, anoxic aquifer. A transect of groundwater wells was monitored along the main direction of the groundwater flow and revealed decreasing

Radio frequency identification (RFID) of dentures in long-term care facilities.

Science.gov (United States)

Madrid, Carlos; Korsvold, Tové; Rochat, Aline; Abarca, Marcelo

2012-03-01

The difficulty of identifying the ownership of lost dentures when found is a common and expensive problem in long term care facilities (LTCFs) and hospitals. The purpose of this study was to evaluate the reliability of using radiofrequency identification (RFID) in the identification of dentures for LTCF residents after 3 and 6 months. Thirty-eight residents of 2 LTCFs in Switzerland agreed to participate after providing informed consent. The tag was programmed with the family and first names of the participants and then inserted in the dentures. After placement of the tag, the information was read. A second and third assessment to review the functioning of the tag occurred at 3 and 6 months, and defective tags (if present) were reported and replaced. The data were analyzed with descriptive statistics. At the 3-month assessment of 34 residents (63 tags) 1 tag was unreadable and 62 tags (98.2%) were operational. At 6 months, the tags of 27 of the enrolled residents (50 tags) were available for review. No examined tag was defective at this time period. Within the limits of this study (number of patients, 6-month time span) RFID appears to be a reliable method of tracking and identifying dentures, with only 1 of 65 devices being unreadable at 3 months and 100% of 50 initially placed tags being readable at the end of the trial. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

A review of radio frequency identification technology for the anatomic pathology or biorepository laboratory: Much promise, some progress, and more work needed.

Science.gov (United States)

Lou, Jerry J; Andrechak, Gary; Riben, Michael; Yong, William H

2011-01-01

Patient safety initiatives throughout the anatomic laboratory and in biorepository laboratories have mandated increasing emphasis on the need for accurately identifying and tracking biospecimen assets throughout their production lifecycle and for archiving/retrieval purposes. However, increasing production volume along with complex workflow characteristics, reliance on manual production processes, and required asset movement to disparate destinations throughout asset lifecycles continue to challenge laboratory efforts. Radio Frequency Identification (RFID) technology, use of radio waves to communicate data between electronic tags attached to objects and a reader, shows significant potential to facilitate and overcome these hurdles. Advantages over traditional barcode labeling include readability without direct line-of-sight alignment to the reader, ability to read multiple tags simultaneously, higher data storage capacity, faster data transmission rate, and capacity to perform multiple read-writes of data to the tag. Most importantly, use of radio waves decreases the need to manually scan each asset, and at each step, identification or tracking event is needed. Temperature monitoring by on-board sensors and three-dimensional position tracking are additional potential benefits of using RFID technology. To date, barriers to implementation of RFID systems in the anatomic laboratory include increased associated costs of tags and readers, system software, data security concerns, lack of specific data standards for stored information, and potential for technological obsolescence during decades of specimen storage. Novel RFID production techniques and increased production capacity are projected to lower costs of some tags to a few cents each. Potentially, information security concerns can be addressed by techniques such as shielding, data encryption, and tag pseudonyms. Commitment by stakeholder groups to develop RFID tag data standards for anatomic pathology and

A review of radio frequency identification technology for the anatomic pathology or biorepository laboratory: Much promise, some progress, and more work needed

Directory of Open Access Journals (Sweden)

Jerry J Lou

2011-01-01

Full Text Available Patient safety initiatives throughout the anatomic laboratory and in biorepository laboratories have mandated increasing emphasis on the need for accurately identifying and tracking biospecimen assets throughout their production lifecycle and for archiving/retrieval purposes. However, increasing production volume along with complex workflow characteristics, reliance on manual production processes, and required asset movement to disparate destinations throughout asset lifecycles continue to challenge laboratory efforts. Radio Frequency Identification (RFID technology, use of radio waves to communicate data between electronic tags attached to objects and a reader, shows significant potential to facilitate and overcome these hurdles. Advantages over traditional barcode labeling include readability without direct line-of-sight alignment to the reader, ability to read multiple tags simultaneously, higher data storage capacity, faster data transmission rate, and capacity to perform multiple read-writes of data to the tag. Most importantly, use of radio waves decreases the need to manually scan each asset, and at each step, identification or tracking event is needed. Temperature monitoring by on-board sensors and three-dimensional position tracking are additional potential benefits of using RFID technology. To date, barriers to implementation of RFID systems in the anatomic laboratory include increased associated costs of tags and readers, system software, data security concerns, lack of specific data standards for stored information, and potential for technological obsolescence during decades of specimen storage. Novel RFID production techniques and increased production capacity are projected to lower costs of some tags to a few cents each. Potentially, information security concerns can be addressed by techniques such as shielding, data encryption, and tag pseudonyms. Commitment by stakeholder groups to develop RFID tag data standards for anatomic

Associating Fast Radio Bursts with Extragalactic Radio Sources: General Methodology and a Search for a Counterpart to FRB 170107

Science.gov (United States)

Eftekhari, T.; Berger, E.; Williams, P. K. G.; Blanchard, P. K.

2018-06-01

The discovery of a repeating fast radio burst (FRB) has led to the first precise localization, an association with a dwarf galaxy, and the identification of a coincident persistent radio source. However, further localizations are required to determine the nature of FRBs, the sources powering them, and the possibility of multiple populations. Here we investigate the use of associated persistent radio sources to establish FRB counterparts, taking into account the localization area and the source flux density. Due to the lower areal number density of radio sources compared to faint optical sources, robust associations can be achieved for less precise localizations as compared to direct optical host galaxy associations. For generally larger localizations that preclude robust associations, the number of candidate hosts can be reduced based on the ratio of radio-to-optical brightness. We find that confident associations with sources having a flux density of ∼0.01–1 mJy, comparable to the luminosity of the persistent source associated with FRB 121102 over the redshift range z ≈ 0.1–1, require FRB localizations of ≲20″. We demonstrate that even in the absence of a robust association, constraints can be placed on the luminosity of an associated radio source as a function of localization and dispersion measure (DM). For DM ≈1000 pc cm‑3, an upper limit comparable to the luminosity of the FRB 121102 persistent source can be placed if the localization is ≲10″. We apply our analysis to the case of the ASKAP FRB 170107, using optical and radio observations of the localization region. We identify two candidate hosts based on a radio-to-optical brightness ratio of ≳100. We find that if one of these is indeed associated with FRB 170107, the resulting radio luminosity (1029‑ 4 × 1030 erg s‑1 Hz‑1, as constrained from the DM value) is comparable to the luminosity of the FRB 121102 persistent source.

Design features of isotope production facility at Inshas cyclotron complex. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Comsan, M N [Nuclear Research Center, Atomic Energy Aurhority, Cairo, (Egypt)

1996-03-01

The nuclear research center, AEA, Egypt is erecting at its Inshas campus cyclotron complex for multidisciplinary use for research and application. The complex is to utilize a russian made AVF cyclotron accelerator of the type MGC-20 with MeV protons. Among its applications, the accelerator will be used for the production of short lived cyclotron isotopes. This article presents a concise description of the design features of isotope production facility to be annexed to the complex layout, schemes for radio waste, ventilation, and air conditioning systems. 2 figs., 2 tabs.

Rectifier analysis for radio frequency energy harvesting and power transport

NARCIS (Netherlands)

Keyrouz, S.; Visser, H.J.; Tijhuis, A.G.

2012-01-01

Wireless Power Transmission (WPT) is an attractive powering method for wireless sensor nodes, battery-less sensors, and Radio-Frequency Identification (RFID) tags. The key element on the receiving side of a WPT system is the rectifying antenna (rectenna) which captures the electromagnetic power and

Hydrogen isotopes identification with the electromagnetic calorimeter TAPS

International Nuclear Information System (INIS)

Matulewicz, T.; Aphecetche, L.; Charbonnier, Y.; Delagrange, H.; Martinez, G.; Schutz, Y.; Marques, F.M.; Diaz, J.; and others.

1996-01-01

A new method has been developed to identify protons and more generally charged massive particles, like charged pions, hydrogen isotopes and heavier particles reaching the TAPS detector. The method was tested on events from the reaction Ar+Ca at 180 A.MeV. (K.A.)

Assessment of fibrous insulation materials for the selenide isotope generator system

International Nuclear Information System (INIS)

Wei, G.C; Tennery, V.J.

1977-11-01

Fibrous insulations for use in the converter and the heat source of the radioisotope-powered, selenide element, thermoelectric generator (selenide isotope generator) are assessed. The most recent system design and material selection basis is presented. Several fibrous insulation materials which have the potential for use as load-bearing or nonload-bearing thermal insulations are reviewed, and thermophysical properties supplied by manufacturers or published in the literature are presented. Potential problems with the application of fibrous insulations in the selenide isotope generator are as follows: compatibility with graphite, the thermoelectric elements, and the isolation hot frame; devitrification, grain growth, and sintering with an accompanying degradation of insulation quality; impurity diffusion from the insulation to adjoining structures; outgassing and storage of fibrous materials. Areas in which thermophysical data or quantitative information on the insulation and structural stability is lacking are identified

A computer program for automatic gamma-ray spectra analysis with isotope identification for the purpose of activation analysis

International Nuclear Information System (INIS)

Weigel, H.; Dauk, J.

1974-01-01

A FORTRAN IV program for a PDP-9 computer, with 16K storage capacity, is developed performing automatic analysis of complex gamma-spectra, taken with Ge/Li/ detectors. It searches for full energy peaks and evaluates the peak areas. The program features and automatically performed isotope identifiaction. It is written in such a flexible manner that after reactor irradiation, spectra from samples of any composition can be evaluated for activation analysis. The peak search rutin is based on the following criteria: the counting rate has to increase for two succesive channels; and the amplitude of the corresponding maximum has to be greater than/or equal to F 1 times the statistical error of the counting rate in the valley just before the maximum. In order to detect superimposed peaks, it is assumed that the dependence of FWHM on channel number is roughly approximated by a linear function, and the actual and''theoretical''FWHM values are compared. To determine the net peak area a Gaussian based function is fitted to each peak. The isotope identification is based on the procedure developed by ADAMS and DAMS. (T.G.)

Isotope Exchange: a Potential Mechanism Regulating the Natural and Anthropogenic Pb Isotope Budget in Coastal Waters

Science.gov (United States)

Chen, M.; Boyle, E. A.; Zurbrick, C.; Carrasco, G. G.; Switzer, A.; Zhao, N.

2016-02-01

Two independent studies on anthropogenic Pb and Pb isotopes in coastal corals from the northern Arabian Gulf and the Singapore Straits have shown an isotopic excursion where the main Pb sources discharging to the water move to more crustal-like values, indicating that the Pb in coastal waters might exchange isotopically with crustal particulates without propotional change in concentration. To investigate this issue, Pb isotope exchange is assessed through a closed-system exchange experiment using estuarine waters collected at the Johor River mouth (discharging to the Singapore Straits). During the experiment, a known amount of NBS-981 (206Pb/207Pb=1.093) was spiked into the unfiltered Johor water (dissolved 206Pb/207Pb = 1.199) and the changing isotopic composition of the dissolved Pb was monitored. Shortly after the spike addition, dissolved Pb exhibited 206Pb/207Pb=1.178, reflecting the influence of the spike. Within the following few days, the 206Pb/207Pb in the water increased to >1.190 with limited changes of the dissolved Pb concentration. The observations in closed-system experiment agree with the isotope difference between Singapore aerosol and seawater in our 2-year-long field observations. The kinetics of isotope exchange were assessed using a simple model, which reproduced >70% of the observed Pb isotope variance. Both the close-system experiment and field measurements imply that isotope exchange can be an important mechanism for regulating the Pb and Pb isotopes in coastal waters. Investigations on the distribution of Pb and Pb isotope in estuaries and coastal waters should further assess the role of isotope exchange in ocean Pb chemistry.

Radio and optical observations of 0218+357 - The smallest Einstein ring?

Science.gov (United States)

O'Dea, Christopher P.; Baum, Stefi A.; Stanghellini, Carlo; Dey, Arjun; Van Breugel, Wil; Deustua, Susana; Smith, Eric P.

1992-01-01

VLA radio observations and optical imaging and spectroscopy of the Einstein radio ring 0218+357 are presented. The ring is detected at 22.4 GHz and shows a basically similar structure at 5, 15, and 22.4 GHz. The B component has varied and was about 15 percent brighter in the 8.4 GHz data than in the data of Patnaik et al. (1992). The ring is highly polarized. A weak jetlike feature extending out roughly 2 arcsec to the southeast of component A is detected at 6 cm. The source has amorphous radio structure extending out to about 11 arcsec from the core. For an adopted redshift of 0.68, the extended radio emission is very powerful. The optical spectrum is rather red and shows no strong features. A redshift of about 0.68 is obtained. The identification is a faint compact m(r) about 20 galaxy which extends to about 4.5 arcsec (about 27 kpc). As much as 50 percent of the total light may be due to a central AGN. The observed double core and ring may be produced by an off-center radio core with extended radio structure.

Variable Isotopic Compositions of Host Plant Populations Preclude Assessment of Aphid Overwintering Sites

Directory of Open Access Journals (Sweden)

Michael S. Crossley

2017-12-01

Full Text Available Soybean aphid (Aphis glycines Matsumura is a pest of soybean in the northern Midwest whose migratory patterns have been difficult to quantify. Improved knowledge of soybean aphid overwintering sites could facilitate the development of control efforts with exponential impacts on aphid densities on a regional scale. In this preliminary study, we explored the utility of variation in stable isotopes of carbon and nitrogen to distinguish soybean aphid overwintering origins. We compared variation in bulk 13C and 15N content in buckthorn (Rhamnus cathartica L. and soybean aphids in Wisconsin, among known overwintering locations in the northern Midwest. Specifically, we looked for associations between buckthorn and environmental variables that could aid in identifying overwintering habitats. We detected significant evidence of correlation between the bulk 13C and 15N signals of soybean aphids and buckthorn, despite high variability in stable isotope composition within and among buckthorn plants. Further, the 15N signal in buckthorn varied predictably with soil composition. However, lack of sufficient differentiation of geographic areas along axes of isotopic and environmental variation appears to preclude the use of carbon and nitrogen isotopic signals as effective predictors of likely aphid overwintering sites. These preliminary data suggest the need for future work that can further account for variability in 13C and 15N within/among buckthorn plants, and that explores the utility of other stable isotopes in assessing likely aphid overwintering sites.

Isotope techniques in water resources development 1991

International Nuclear Information System (INIS)

1992-01-01

Water resources are scarce in many parts of the world. Often, the only water resource is groundwater. Overuse usually invites a rapid decline in groundwater resources which are recharged insufficiently, or not at all, by prevailing climatic conditions. These and other problems currently encountered in hydrology and associated environmental fields have prompted an increasing demand for the utilization of isotope methods. Such methods have been recognized as being indispensable for solving problems such as the identification of pollution sources, characterization of palaeowater resources, evaluation of recharge and evaporative discharge under arid and semi-arid conditions, reconstruction of past climates, study of the interrelationships between surface and groundwater, dating of groundwater and validation of contaminant transport models. Moreover, in combination with other hydrogeological and geochemical methods, isotope techniques can provide useful hydrological information, such as data on the origin, replenishment and dynamics of groundwater. It was against this background that the International Atomic Energy Agency, in co-operation with the United Nations Educational, Scientific and Cultural Organization and the International Association of Hydrological Sciences, organized this symposium on the Use of Isotope Techniques in Water Resources Development, which took place in Vienna from 11 to 15 March 1991. The main themes of the symposium were the use of isotope techniques in solving practical problems of water resources assessment and development, particularly with respect to groundwater protection, and in studying environmental problems related to water, including palaeohydrological and palaeoclimatological problems. A substantial part of the oral presentations was concerned with the present state and trends in groundwater dating, and with some methodological aspects. These proceedings contain the papers of 37 oral and the extended synopses of 47 poster

Dual isotope plots reflect transformation pathways of pesticides: Potential to assess pesticide fate and elucidate transformation mechanisms

Science.gov (United States)

Meyer, Armin; Penning, Holger; Sorensen, Sebastian; Aamand, Jens; Elsner, Martin

2010-05-01

The degradation of pesticides in deeper soil layers and groundwater is of growing interest, because they have repeatedly been found in drinking water supply wells and may pose a risk to future water resources. Current assessment schemes face a common problem, however: natural degradation often cannot be reliably assessed by concentration measurements alone, since mass balances are difficult to establish and transformation cannot be distinguished from sorption or dilution. Even detection of metabolites may only give an incomplete picture. When several transformation pathways occur, some metabolites may be degraded or form bound residues so that the associated pathways may be missed. Our research shows that dual isotope plots derived from compound specific isotope analysis offer a novel approach to give additional, complementary insight into the natural degradation of pesticides. Detection of metabolites is not required, since the isotope fractionation can be fully observed in the pesticide itself. Specifically, different initial biotransformation reactions of the phenylurea herbicide isoproturon (3-(4-isopropylphenyl)-1,1-dimethylurea) in pure culture experiments with bacterial and fungal strains showed strongly pathway-dependent isotope fractionation. When analyzing isotopic changes in different parts of the isoproturon molecule, hydroxylation of the isopropyl group by fungi was found to be associated with C and H isotope fractionation. In contrast, hydrolysis by Arthrobacter globiformis D47 caused strong C and N isotope fractionation, albeit in a different manner than abiotic hydrolysis so that isotope measurements can distinguish between both modes of transformation. Likewise, we observed highly pathway-dependent C and N isotope fractionation of atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine). Desalkylation of atrazine by Rhodococcus sp. strain NI86/21 resulted in enrichment of both 13-C and 15-N in atrazine, whereas hydrolysis to hydroxyatrazine

Isotope analysis reveals foraging area dichotomy for atlantic leatherback turtles.

Directory of Open Access Journals (Sweden)

Stéphane Caut

Full Text Available BACKGROUND: The leatherback turtle (Dermochelys coriacea has undergone a dramatic decline over the last 25 years, and this is believed to be primarily the result of mortality associated with fisheries bycatch followed by egg and nesting female harvest. Atlantic leatherback turtles undertake long migrations across ocean basins from subtropical and tropical nesting beaches to productive frontal areas. Migration between two nesting seasons can last 2 or 3 years, a time period termed the remigration interval (RI. Recent satellite transmitter data revealed that Atlantic leatherbacks follow two major dispersion patterns after nesting season, through the North Gulf Stream area or more eastward across the North Equatorial Current. However, information on the whole RI is lacking, precluding the accurate identification of feeding areas where conservation measures may need to be applied. METHODOLOGY/PRINCIPAL FINDINGS: Using stable isotopes as dietary tracers we determined the characteristics of feeding grounds of leatherback females nesting in French Guiana. During migration, 3-year RI females differed from 2-year RI females in their isotope values, implying differences in their choice of feeding habitats (offshore vs. more coastal and foraging latitude (North Atlantic vs. West African coasts, respectively. Egg-yolk and blood isotope values are correlated in nesting females, indicating that egg analysis is a useful tool for assessing isotope values in these turtles, including adults when not available. CONCLUSIONS/SIGNIFICANCE: Our results complement previous data on turtle movements during the first year following the nesting season, integrating the diet consumed during the year before nesting. We suggest that the French Guiana leatherback population segregates into two distinct isotopic groupings, and highlight the urgent need to determine the feeding habitats of the turtle in the Atlantic in order to protect this species from incidental take by

Isotope-based immunological techniques. Their use in assessment of immune competence and the study of immune responses to pathogens

International Nuclear Information System (INIS)

Duffus, W.P.H.

1984-01-01

The influence of isotope-based techniques on both assessment of immune competence and immune response to pathogens is discussed. Immunodeficiencies acquired as a result of factors like malnutrition and concomitant disease can severely affect not only attempts to intensify and improve production but also successful immune response against important vaccines such as rinderpest and foot-and-mouth disease. Isotope-based techniques, with their accuracy, speed and small sample volume, are ideally suited for assessing immunocompetence. One of the main drawbacks remains antigen purity, an area where research should now be concentrated. Lymphocyte transformation is widely used to assess cell-mediated immuno-competence but techniques to assess biological functions such as phagocytosis and cell-mediated cytotoxicity could more usefully reflect immune status. These latter techniques utilize isotopes such as 3 H, 14 C, 32 P and 125 I. Investigation of specific cell-mediated immune response often requires a labelled target. Suitable isotopes such as 51 Cr, 99 Tcsup(m), 75 Se and 3 H are compared for their capacity to label both mammalian and parasite targets. Suggestions are made on a number of areas of research that might usefully be encouraged and supported in order to improve applied veterinary immunology in tropical countries. (author)

Identification of radio emission from the Io flux tube

International Nuclear Information System (INIS)

Riddle, A.C.

1983-01-01

Many theories and observations suggest that Jovian decametric radio emission is generated in flux tubes that pass close to Io's orbit. However, comparison of theory and observation is hindered by lack of knowledge as to which specific flux tube is responsible for a particular emission. In this note, emission from the instantaneous Io flux tube is identified. This makes possible a mapping of emissions onto the causative flux tubes for a significant range of Jovian longitudes (240 0 --360 0 )

Radio detection of extensive air showers at the Pierre Auger Observatory

International Nuclear Information System (INIS)

Berat, C.

2013-01-01

The Pierre Auger Observatory explores the potential of radio-detection techniques to measure extensive air showers (EAS) induced by ultra-high energy cosmic rays. To study in detail the mechanisms responsible for radio emission in the MHz range, the Auger Engineering Radio Array has been installed at the Observatory. Presently consisting of 24 radio-detection stations, this number will grow to 150 units covering an area of almost 20 km 2 . Novel detection techniques based on the GHz emission from the EAS are currently being studied. AMBER (Air-shower Microwave Bremsstrahlung Experimental Radiometer) and MIDAS (Microwave Detection of Air Showers) are prototypes for a large imaging dish antenna. In EASIER (Extensive Air Shower Identification using Electron Radiometer), the microwave emission is detected by antenna horns located on each surface detector. MIDAS is a self-triggering system while AMBER and EASIER use the trigger from the Auger detectors to record the emission. The status of these radio-detection R and D efforts at the Pierre Auger Observatory will be reported

Radio detection of extensive air showers at the Pierre Auger Observatory

Energy Technology Data Exchange (ETDEWEB)

Berat, C., E-mail: berat@lpsc.in2p3.fr [LPSC, Université Joseph Fourier Grenoble 1, CNRS/IN2P3, Institut Polytechnique de Grenoble, 53 rue des Martyrs, 38000 Grenoble (France)

2013-08-01

The Pierre Auger Observatory explores the potential of radio-detection techniques to measure extensive air showers (EAS) induced by ultra-high energy cosmic rays. To study in detail the mechanisms responsible for radio emission in the MHz range, the Auger Engineering Radio Array has been installed at the Observatory. Presently consisting of 24 radio-detection stations, this number will grow to 150 units covering an area of almost 20 km{sup 2}. Novel detection techniques based on the GHz emission from the EAS are currently being studied. AMBER (Air-shower Microwave Bremsstrahlung Experimental Radiometer) and MIDAS (Microwave Detection of Air Showers) are prototypes for a large imaging dish antenna. In EASIER (Extensive Air Shower Identification using Electron Radiometer), the microwave emission is detected by antenna horns located on each surface detector. MIDAS is a self-triggering system while AMBER and EASIER use the trigger from the Auger detectors to record the emission. The status of these radio-detection R and D efforts at the Pierre Auger Observatory will be reported.

Assessment of Bacterial Degradation of Aromatic Hydrocarbons in the Environment by Analysis of Stable Carbon Isotope Fractionation

Energy Technology Data Exchange (ETDEWEB)

Meckenstock, Rainer U. [Eberhard-Karls University of Tuebingen, Center for Applied Geoscience (Germany)], E-mail: rainer.meckenstock@uni-tuebingen.de; Morasch, Barbara [University of Konstanz, Faculty of Biology (Germany); Kaestner, Matthias; Vieth, Andrea; Richnow, Hans Hermann [Center for Environmental Research, Department of Remediation Research (Germany)

2002-05-15

{sup 13}C/{sup 12}C stable carbon isotope fractionation was used to assess biodegradation in contaminated aquifers with toluene as a model compound. Different strains of anaerobic bacteria (Thauera aromatica, Geobacter metallireducens, and the sulfate-reducing strain TRM1) showed consistent {sup 13}C/{sup 12}C carbon isotope fractionation with fractionation factors between {alpha}C = 1.0017 and 1.0018. In contrast, three cultures of aerobic organisms, using different mono- and dioxygenase enzyme systems to initiate toluene degradation, showed variable isotope fractionation factors of {alpha}C = 1.0027 (Pseudomonasputida strain mt-2), {alpha}C = 1.0011 (Ralstonia picketii), and{alpha}C = 1.0004 (Pseudomonas putida strain F1). The great variability of isotope fractionation between different aerobic bacterial strains suggests that interpretation of isotope data in oxic habitats can only be qualitative. A soil column was run as a model system for contaminated aquifers with toluene as the carbon source and sulfate as the electron acceptor and samples were taken at different ports along the column. Microbial toluene degradation was calculated based on the {sup 13}C/{sup 12}C isotope fractionation factors of the batch culture experiments together with the observed {sup 13}C/{sup 12}C isotope shifts of the residual toluene fractions. The calculated percentage of biodegradation, B, correlated well with the decreasing toluene concentrations at the sampling ports and indicated the increasing extent of biodegradation along the column. The theoretical toluene concentrations as calculated based on the isotope values matched the measured concentrations at the different sampling ports indicating that the Rayleigh equation can be used to calculate biodegradation in quasi closed systems based on measured isotope shifts. A similar attempt was performed to assess toluene degradation in a contaminated, anoxic aquifer. A transect of groundwater wells was monitored along the main

Uncertainties achievable for uranium isotope-amount ratios. Estimates based on the precision and accuracy of recent characterization measurements

International Nuclear Information System (INIS)

Mathew, K.J.; Essex, R.M.; Gradle, C.; Narayanan, U.

2015-01-01

Certified reference materials (CRMs) recently characterized by the NBL for isotope-amount ratios are: (i) CRM 112-A, Uranium (normal) Metal Assay and Isotopic Standard, (ii) CRM 115, Uranium (depleted) Metal Assay and Isotopic Standard, and (iii) CRM 116-A, Uranium (enriched) Metal Assay and Isotopic Standard. NBL also completed re-characterization of the isotope-amount ratios in CRM 125-A, Uranium (UO 2 ) Pellet Assay, Isotopic, and Radio-chronometric Standard. Three different TIMS analytical techniques were employed for the characterization analyses. The total evaporation technique was used for the major isotope-amount ratio measurement, the modified total evaporation technique was used for both the major and minor isotope-amount ratios, and minor isotope-amount ratios were also measured using a Conventional technique. Uncertainties for the characterization studies were calculated from the combined TIMS data sets following the ISO Guide to the expression of uncertainty in measurement. The uncertainty components for the isotope-amount ratio values are discussed. (author)

Absolute isotopic abundances of Ti in meteorites

International Nuclear Information System (INIS)

Niederer, F.R.; Papanastassiou, D.A.; Wasserburg, G.J.

1985-01-01

The absolute isotope abundance of Ti has been determined in Ca-Al-rich inclusions from the Allende and Leoville meteorites and in samples of whole meteorites. The absolute Ti isotope abundances differ by a significant mass dependent isotope fractionation transformation from the previously reported abundances, which were normalized for fractionation using 46 Ti/ 48 Ti. Therefore, the absolute compositions define distinct nucleosynthetic components from those previously identified or reflect the existence of significant mass dependent isotope fractionation in nature. We provide a general formalism for determining the possible isotope compositions of the exotic Ti from the measured composition, for different values of isotope fractionation in nature and for different mixing ratios of the exotic and normal components. The absolute Ti and Ca isotopic compositions still support the correlation of 50 Ti and 48 Ca effects in the FUN inclusions and imply contributions from neutron-rich equilibrium or quasi-equilibrium nucleosynthesis. The present identification of endemic effects at 46 Ti, for the absolute composition, implies a shortfall of an explosive-oxygen component or reflects significant isotope fractionation. Additional nucleosynthetic components are required by 47 Ti and 49 Ti effects. Components are also defined in which 48 Ti is enhanced. Results are given and discussed. (author)

Analysis of dissolved organic carbon concentration and 13C isotopic signature by TOC-IRMS - assessment of analytical performance

Science.gov (United States)

Kirkels, Frédérique; Cerli, Chiara; Federherr, Eugen; Kalbitz, Karsten

2013-04-01

Stable carbon isotopes provide a powerful tool to assess carbon pools and their dynamics. Dissolved organic carbon (DOC) has been recognized to play an important role in ecosystem functioning and carbon cycling and has therefore gained increased research interest. However, direct measurement of 13C isotopic signature of carbon in the dissolved phase is technically challenging particularly using high temperature combustion. Until recently, mainly custom-made systems existed which were modified for coupling of TOC instruments with IRMS for simultaneous assessment of C content and isotopic signature. The variety of coupled systems showed differences in their analytical performances. For analysis of DOC high temperature combustion is recognized as best performing method, owing to its high efficiency of conversion to CO2 also for highly refractory components (e.g. humic, fulvic acids) present in DOC and soil extracts. Therefore, we tested high temperature combustion TOC coupled to IRMS (developed by Elementar Group) for bulk measurements of DOC concentration and 13C signature. The instruments are coupled via an Interface to exchange the carrier gas from O2 to He and to concentrate the derived CO2 for the isotope measurement. Analytical performance of the system was assessed for a variety of organic compounds characterized by different stability and complexity, including humic acid and DOM. We tested injection volumes between 0.2-3 ml, thereby enabling measurement of broad concentration ranges. With an injection volume of 0.5 ml (n=3, preceded by 1 discarded injection), DOC and 13C signatures for concentrations between 5-150 mg C/L were analyzed with high precision (standard deviation (SD) predominantly TOC-IRMS in comparison with other systems capable of determining C concentration and isotopic signatures. We recognize the advantages of this system providing: - High sample throughput, short measurement time (15 minutes), flexible sample volume - Easy maintenance

Current tools and technologies for the identification and traceability

NARCIS (Netherlands)

Hogewerf, P.H.

2013-01-01

Radio frequency identification (RFID) systems were introduced in the 1970ies mainly for farm management purposes. They were followed in the 1990ies by the use of injectable transponders for companion animals. Since the beginning of this age, many countries have introduced animal identification

Measurement of radium isotopes with the ANU AMS facility

International Nuclear Information System (INIS)

Tims, S.G.; Fifield, L.K.

2003-01-01

In contaminated environments the spatial distribution of thorium should be far more uniform than that for uranium. Accordingly, measurements of the 228 Ra/ 226 Ra ratio may provide a probe with which to assess variations in the amount of uranium-process derived 226 Ra. Furthermore, for contaminated or rehabilitated areas where the 226 Ra/ 228 Ra ratio is anomalous, measurements of the transport of material away from the site via the ratio could provide information on the local erosion rate. Accelerator Mass Spectrometry (AMS) adds a tandem ion accelerator and additional analysis stages to a conventional mass spectrometry arrangement, in order to facilitate ultra-trace level abundance measurements of selected isotopes. In doing so, it also makes use of the detection and analysis techniques of traditional nuclear physics. For the 226,228 Ra isotopes AMS offers a number of advantages over the more traditional techniques of a-and γ- spectroscopy. AMS requires less sample mass, and because of its very high selectivity provides excellent discrimination against potential interferences. The smaller sample size (∼1g) also allows a considerable simplification of the radio-chemical processing compared with α-spectroscopy. Two major advantages are the ability to measure both isotopes with the one technique without the necessity of waiting for 228 Th to grow in and, that once prepared, the 228 Ra/ 226 Ra ratio for ∼30 samples can be determined in about a day. This paper will describe the AMS technique, and highlight recent developments in the measurement of 226,228 Ra with the ANU system

POSSIBILITY OF USING CARBON ISOTOPES IN THE ASSESSMENT OF THE POLLUTION OF GAS PHASE IN ENVIRONMENTAL RESEARCH

Directory of Open Access Journals (Sweden)

Dorota Porowska

2015-10-01

Full Text Available Carbon isotope analyses can be used for knowledge and practical purpose. They can be used to assess the genesis of carbon in geochemical environment, and may also be used to indicate environmental contamination by carbon-containing compounds. The aim of the paper is to indicate the possibilities of using carbon isotope composition for interpretation concerning the following elements of the natural environment: atmospheric air, subsurface zone (gases in soils and aeration zone in terms of natural and anthropogenic factors influencing on their quality. This method can be applied universally, when carbon sources are different in isotopic composition.

Identification and development of waste management alternatives for Strategic Environmental Assessment (SEA)

International Nuclear Information System (INIS)

Desmond, Margaret

2009-01-01

The European Union Strategic Environmental Assessment (SEA) Directive (2001/42/EC) requires the assessment of likely significant effects on the environment of implementing plans or programmes and reasonable alternatives. While SEA regulations and guidelines emphasize rigour and objectivity in the assessment of alternatives they have little to say on their actual identification. Therefore, criteria should be developed which would aid decision makers in the identification of alternatives appropriate to the tier of decision-making and which meet the objectives of SEA. A methodology is set out in this paper for identifying SEA alternatives for a proposed waste management plan/programme. Specifically, the methodology describes a set of alternatives identification criteria, which will meet the requirements and objectives of SEA and waste management legislation. The outputs from the methodology will help focus on the identification of more sustainable alternatives for waste management planning in Ireland

The Radio JOVE Project - Shoestring Radio Astronomy

Science.gov (United States)

Thieman, J.; Flagg, R.; Greenman, W.; Higgins, C.; Reyes, F.; Sky, J.

2010-01-01

Radio JOVE is an education and outreach project intended to give students and other interested individuals hands-on experience in learning radio astronomy. They can do this through building a radio telescope from a relatively inexpensive kit that includes the parts for a receiver and an antenna as well as software for a computer chart recorder emulator (Radio Skypipe) and other reference materials

Studies on the electrochemical behaviour of iron by the use of radio-tracer technique, 1. Studies on the electrodeposition and dissolution of iron by the use of radio-tracer technique

Energy Technology Data Exchange (ETDEWEB)

Moritani, Kimikazu; Ito, Yasuhiko; Kamata, Masahiro; Oishi, Jun

1984-12-01

To investigate whether radio-tracer techniques can augment conventional electrochemical techniques, offering useful information about the electrochemical behaviour of iron, the current efficiency of the electrodeposition of iron and the corrosion rate of metallic iron were measured by the radio-tracer method and the results were compared with the results measured by gravimetry and absorption photometry. Major conclusions obtained by the experiments are summarized as: 1) Between ordinary Fe and /sup 59/Fe, no isotope effect was observed. 2) Radiation from /sup 59/Fe had no effect on the electrode reaction. 3) While the use of a Ge semiconductor detector is undoubtedly preferable, Geiger-Mueller counter or NaI(Tl) scintillation counter gave fully satisfactory results. 4) Electrodeposited iron corrodes several times more rapidly than the iron base metal. These results suggests many other interesting applications of the radio-tracer technique when it is desired to obtain more detailed information on the electrochemical behaviour of iron. (author).

Probabilistic Dynamic Framed Slotted ALOHA for RFID Tag Identification

DEFF Research Database (Denmark)

Nguyen, Chuyen T.; Hayashi, Kazunori; Kaneko, Megumi

2013-01-01

In this paper, we study radio frequency identification tag identification problems using framed slotted ALOHA protocol. Each tag will be assumed to participate in the contention with a certain probability. Then, the frame size and the probability will be dynamically controlled by the reader in ev...

Progress in stable isotope analysis and new possibilities of clinical investigations

International Nuclear Information System (INIS)

Roth, E.

1989-01-01

The use of stable isotopes in medicine rests on three possibilities offered by labelling: identification of an element, a molecule, or a fragment of a molecule along its biological pathway; quantification of biological pools by isotopic dilution; measurement of metabolization rates, and more generally of clearances. Whenever a corporal function experiences a disregulation reflected either by changes in metabolic activity or modifications of the importance of pools of certain molecules, the possibility exists of making use of isotopes in diagnosis. Examples of practical applications of stable isotopes are given and analytical problems that had to be solved are underlined

Reflected ray retrieval from radio occultation data using radio holographic filtering of wave fields in ray space

Science.gov (United States)

Gorbunov, Michael E.; Cardellach, Estel; Lauritsen, Kent B.

2018-03-01

Linear and non-linear representations of wave fields constitute the basis of modern algorithms for analysis of radio occultation (RO) data. Linear representations are implemented by Fourier Integral Operators, which allow for high-resolution retrieval of bending angles. Non-linear representations include Wigner Distribution Function (WDF), which equals the pseudo-density of energy in the ray space. Representations allow for filtering wave fields by suppressing some areas of the ray space and mapping the field back from the transformed space to the initial one. We apply this technique to the retrieval of reflected rays from RO observations. The use of reflected rays may increase the accuracy of the retrieval of the atmospheric refractivity. Reflected rays can be identified by the visual inspection of WDF or spectrogram plots. Numerous examples from COSMIC data indicate that reflections are mostly observed over oceans or snow, in particular over Antarctica. We introduce the reflection index that characterizes the relative intensity of the reflected ray with respect to the direct ray. The index allows for the automatic identification of events with reflections. We use the radio holographic estimate of the errors of the retrieved bending angle profiles of reflected rays. A comparison of indices evaluated for a large base of events including the visual identification of reflections indicated a good agreement with our definition of reflection index.

Reflected ray retrieval from radio occultation data using radio holographic filtering of wave fields in ray space

Directory of Open Access Journals (Sweden)

M. E. Gorbunov

2018-03-01

Full Text Available Linear and non-linear representations of wave fields constitute the basis of modern algorithms for analysis of radio occultation (RO data. Linear representations are implemented by Fourier Integral Operators, which allow for high-resolution retrieval of bending angles. Non-linear representations include Wigner Distribution Function (WDF, which equals the pseudo-density of energy in the ray space. Representations allow for filtering wave fields by suppressing some areas of the ray space and mapping the field back from the transformed space to the initial one. We apply this technique to the retrieval of reflected rays from RO observations. The use of reflected rays may increase the accuracy of the retrieval of the atmospheric refractivity. Reflected rays can be identified by the visual inspection of WDF or spectrogram plots. Numerous examples from COSMIC data indicate that reflections are mostly observed over oceans or snow, in particular over Antarctica. We introduce the reflection index that characterizes the relative intensity of the reflected ray with respect to the direct ray. The index allows for the automatic identification of events with reflections. We use the radio holographic estimate of the errors of the retrieved bending angle profiles of reflected rays. A comparison of indices evaluated for a large base of events including the visual identification of reflections indicated a good agreement with our definition of reflection index.

Protocols development for security and privacy of radio frequency identification systems

Science.gov (United States)

Sabbagha, Fatin

There are benefits to adopting radio frequency identification (RFID) technology, although there are methods of attack that can compromise the system. This research determined how that may happen and what possible solutions can keep that from happening. Protocols were developed to implement better security. In addition, new topologies were developed to handle the problems of the key management. Previously proposed protocols focused on providing mutual authentication and privacy between readers and tags. However, those protocols are still vulnerable to be attacked. These protocols were analyzed and the disadvantages shown for each one. Previous works assumed that the channels between readers and the servers were secure. In the proposed protocols, a compromised reader is considered along with how to prevent tags from being read by that reader. The new protocols provide mutual authentication between readers and tags and, at the same time, remove the compromised reader from the system. Three protocols are proposed. In the first protocol, a mutual authentication is achieved and a compromised reader is not allowed in the network. In the second protocol, the number of times a reader contacts the server is reduced. The third protocol provides authentication and privacy between tags and readers using a trusted third party. The developed topology is implemented using python language and simulates work to check the efficiency regarding the processing time. The three protocols are implemented by writing codes in C language and then compiling them in MSP430. IAR Embedded workbench is used, which is an integrated development environment with the C/C++ compiler to generate a faster code and to debug the microcontroller. In summary, the goal of this research is to find solutions for the problems on previously proposed protocols, handle a compromised reader, and solve key management problems.

THE RADIO JET ASSOCIATED WITH THE MULTIPLE V380 ORI SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Rodríguez, Luis F.; Yam, J. Omar; Carrasco-González, Carlos [Instituto de Radioastronomía y Astrofísica, UNAM, Apdo. Postal 3-72 (Xangari), 58089 Morelia, Michoacán, México (Mexico); Anglada, Guillem [Instituto de Astrofísica de Andalucía, CSIC, Glorieta de la Astronomía, s/n, E-18008, Granada (Spain); Trejo, Alfonso, E-mail: l.rodriguez@crya.unam.mx [Academia Sinica Institute of Astronomy and Astrophysics, P.O. Box 23-141, Taipei 10617, Taiwan (China)

2016-10-01

The giant Herbig–Haro object 222 extends over ∼6′ in the plane of the sky, with a bow shock morphology. The identification of its exciting source has remained uncertain over the years. A non-thermal radio source located at the core of the shock structure was proposed to be the exciting source. However, Very Large Array studies showed that the radio source has a clear morphology of radio galaxy and a lack of flux variations or proper motions, favoring an extragalactic origin. Recently, an optical–IR study proposed that this giant HH object is driven by the multiple stellar system V380 Ori, located about 23′ to the SE of HH 222. The exciting sources of HH systems are usually detected as weak free–free emitters at centimeter wavelengths. Here, we report the detection of an elongated radio source associated with the Herbig Be star or with its close infrared companion in the multiple V380 Ori system. This radio source has the characteristics of a thermal radio jet and is aligned with the direction of the giant outflow defined by HH 222 and its suggested counterpart to the SE, HH 1041. We propose that this radio jet traces the origin of the large scale HH outflow. Assuming that the jet arises from the Herbig Be star, the radio luminosity is a few times smaller than the value expected from the radio–bolometric correlation for radio jets, confirming that this is a more evolved object than those used to establish the correlation.

THE RADIO JET ASSOCIATED WITH THE MULTIPLE V380 ORI SYSTEM

International Nuclear Information System (INIS)

Rodríguez, Luis F.; Yam, J. Omar; Carrasco-González, Carlos; Anglada, Guillem; Trejo, Alfonso

2016-01-01

The giant Herbig–Haro object 222 extends over ∼6′ in the plane of the sky, with a bow shock morphology. The identification of its exciting source has remained uncertain over the years. A non-thermal radio source located at the core of the shock structure was proposed to be the exciting source. However, Very Large Array studies showed that the radio source has a clear morphology of radio galaxy and a lack of flux variations or proper motions, favoring an extragalactic origin. Recently, an optical–IR study proposed that this giant HH object is driven by the multiple stellar system V380 Ori, located about 23′ to the SE of HH 222. The exciting sources of HH systems are usually detected as weak free–free emitters at centimeter wavelengths. Here, we report the detection of an elongated radio source associated with the Herbig Be star or with its close infrared companion in the multiple V380 Ori system. This radio source has the characteristics of a thermal radio jet and is aligned with the direction of the giant outflow defined by HH 222 and its suggested counterpart to the SE, HH 1041. We propose that this radio jet traces the origin of the large scale HH outflow. Assuming that the jet arises from the Herbig Be star, the radio luminosity is a few times smaller than the value expected from the radio–bolometric correlation for radio jets, confirming that this is a more evolved object than those used to establish the correlation.

Contactless and absolute linear displacement detection based upon 3D printed magnets combined with passive radio-frequency identification

Science.gov (United States)

Windl, Roman; Abert, Claas; Bruckner, Florian; Huber, Christian; Vogler, Christoph; Weitensfelder, Herbert; Suess, Dieter

2017-11-01

Within this work a passive and wireless magnetic sensor, to monitor linear displacements, is proposed. We exploit recent advances in 3D printing and fabricate a polymer bonded magnet with a spatially linear magnetic field component corresponding to the length of the magnet. Regulating the magnetic compound fraction during printing allows specific shaping of the magnetic field distribution. A giant magnetoresistance magnetic field sensor is combined with a radio-frequency identification tag in order to passively monitor the exerted magnetic field of the printed magnet. Due to the tailored magnetic field, a displacement of the magnet with respect to the sensor can be detected within the sub-mm regime. The sensor design provides good flexibility by controlling the 3D printing process according to application needs. Absolute displacement detection using low cost components and providing passive operation, long term stability, and longevity renders the proposed sensor system ideal for structural health monitoring applications.

Contactless and absolute linear displacement detection based upon 3D printed magnets combined with passive radio-frequency identification

Directory of Open Access Journals (Sweden)

Roman Windl

2017-11-01

Full Text Available Within this work a passive and wireless magnetic sensor, to monitor linear displacements, is proposed. We exploit recent advances in 3D printing and fabricate a polymer bonded magnet with a spatially linear magnetic field component corresponding to the length of the magnet. Regulating the magnetic compound fraction during printing allows specific shaping of the magnetic field distribution. A giant magnetoresistance magnetic field sensor is combined with a radio-frequency identification tag in order to passively monitor the exerted magnetic field of the printed magnet. Due to the tailored magnetic field, a displacement of the magnet with respect to the sensor can be detected within the sub-mm regime. The sensor design provides good flexibility by controlling the 3D printing process according to application needs. Absolute displacement detection using low cost components and providing passive operation, long term stability, and longevity renders the proposed sensor system ideal for structural health monitoring applications.

Radio astronomy

Energy Technology Data Exchange (ETDEWEB)

Nagnibeda, V.G.

1981-01-01

The history of radio astronomical observations at the Astronomical Observatory of Leningrad State University is reviewed. Various facilities are described, and methods and instruments used are discussed. Some results are summarized for radio observations of the sun, including observations of local sources of solar radio emission, the absolute solar radio flux, and radio emission from filaments and prominences.

Heavy metals pollution and pb isotopic signatures in surface sediments collected from Bohai Bay, North China.

Science.gov (United States)

Gao, Bo; Lu, Jin; Hao, Hong; Yin, Shuhua; Yu, Xiao; Wang, Qiwen; Sun, Ke

2014-01-01

To investigate the characteristics and potential sources of heavy metals pollution, surface sediments collected from Bohai Bay, North China, were analyzed for the selected metals (Cd, Cr, Cu, Ni, Pb, and Zn). The Geoaccumulation Index was used to assess the level of heavy metal pollution. Pb isotopic compositions in sediments were also measured to effectively identify the potential Pb sources. The results showed that the average concentrations of Cd, Cr, Cu, Ni, Pb, and Zn were 0.15, 79.73, 28.70, 36.56, 25.63, and 72.83 mg/kg, respectively. The mean concentrations of the studied metals were slightly higher than the background values. However, the heavy metals concentrations in surface sediments in Bohai Bay were below the other important bays or estuaries in China. The assessment by Geoaccumulation Index indicated that Cr, Zn, and Cd were classified as "the unpolluted" level, while Ni, Cu, and Pb were ranked as "unpolluted to moderately polluted" level. The order of pollution level of heavy metals was: Pb > Ni > Cu > Cr > Zn > Cd. The Pb isotopic ratios in surface sediments varied from 1.159 to 1.185 for (206)Pb/(207)Pb and from 2.456 to 2.482 for (208)Pb/(207)Pb. Compared with Pb isotopic radios in other sources, Pb contaminations in the surface sediments of Bohai Bay may be controlled by the mix process of coal combustion, aerosol particles deposition, and natural sources.

PENGEMBANGAN PROTOTIPE SISTEM KONTROL MP3 PLAYER BERBASIS RADIO FREQUENCY IDENTIFICATION PADA SISTEM PELAYANAN INFORMASI OBJEK MUSEUM

Directory of Open Access Journals (Sweden)

I Gede Nurhayata

2015-05-01

Full Text Available Adanya perbedaan dalam penyampaian informasi objek museum secara lisan oleh beberapa pemandu wisata menunjukkan kurangnya standarisasi layanan informasi objek museum. Penelitian ini bertujuan menghasilkan prototipe perangkat elektronik mobile sebagai salah satu alternatif standarisasi sistem pelayanan informasi objek museum. Penelitian ini menerapkan metode pengembangan dengan dua sub sistem perangkat pelayanan informasi objek meliputi:1 sistem identifikasi objek museum berbasis Radio Frequency Identification (RFID dan 2 sistem penyampaian informasi audio berbasis MP3 Player. Sub sistem pertama bertujuan mengenali identitas objek museum melalui perangkat RFID reader.  Sedangkan sub sistem kedua, bertujuan mengakses dan memainkan file audio pada MP3 player sehingga didengar melalui headphone. Hasil penelitian pada tahun pertama ini berupa perangkat keras dan perangkat lunak dalam identifikasi Tag ID dan kode tombol remote kontrol MP3 player. Berdasarkan data kinerja perangkat lunak dapat disimpulkan bahwa mikrokontroler AT89S51 dalam identifikasi Tag ID dan kode tombol pada remote kontrol MP3 player telah bekerja sesuai rancangan yang diharapkan. Disamping itu telah berhasil mengakses nomor informasi file audio sesuai dengan nomor identitas objek.

Chernobyl seed project. Advances in the identification of differentially abundant proteins in a radio-contaminated environment.

Science.gov (United States)

Rashydov, Namik M; Hajduch, Martin

2015-01-01

Plants have the ability to grow and successfully reproduce in radio-contaminated environments, which has been highlighted by nuclear accidents at Chernobyl (1986) and Fukushima (2011). The main aim of this article is to summarize the advances of the Chernobyl seed project which has the purpose to provide proteomic characterization of plants grown in the Chernobyl area. We present a summary of comparative proteomic studies on soybean and flax seeds harvested from radio-contaminated Chernobyl areas during two successive generations. Using experimental design developed for radio-contaminated areas, altered abundances of glycine betaine, seed storage proteins, and proteins associated with carbon assimilation into fatty acids were detected. Similar studies in Fukushima radio-contaminated areas might complement these data. The results from these Chernobyl experiments can be viewed in a user-friendly format at a dedicated web-based database freely available at http://www.chernobylproteomics.sav.sk.

Final Report to the Department of the Energy for Project Entitled Rare Isotope Science Assessment Committee

International Nuclear Information System (INIS)

Shapero, Donald; Meyer, Timothy I.

2007-01-01

The Rare Isotope Science Assessment Committee (RISAC) was convened by the National Research Council in response to an informal request from the DOE's Office of Nuclear Physics and the White House Office of Management and Budget. The charge to the committee is to examine and assess the broader scientific and international contexts of a U.S.-based rare-isotope facility. The committee met for the first time on December 16-17, 2005, in Washington, DC, and held three subsequent meetings. The committee's's final report was publicly released in unedited, prepublication form on Friday, December 8, 2006. The report was published in full-color by the National Academies Press in April 2007. Copies of the report were distributed to key decision makers and stakeholders around the world.

Isolation and identification of a novel radio-resistant strain

International Nuclear Information System (INIS)

Zhang Zhidong; Mao Jun; Wang Wei; Tang Qiyong; Shi Yuhu

2008-01-01

A novel radio-resistant strain named RL2 was studied polyphasically, which was isolated from the soils in the Gurban-Tunggut Desert, Xinjiang. The strain is Gam-positive, sphere-shaped and pink pigmented; The DNA (G+C) contents of RL2 is 71.62mo1%; The 16S rDNA genes of RL2 and D. radiodurans type strain DSM20539 shows a high level of similarity (97.2%). According to phenotypic characteristics and phylogenetic analysis, it can be suggested that the strain RL2 has been identified as Deinococcus. sp and it may be a novel species. (authors)

Introduction to Body Composition Assessment Using the Deuterium Dilution Technique with Analysis of Urine Samples by Isotope Ratio Mass Spectrometry

International Nuclear Information System (INIS)

2010-01-01

The IAEA has fostered the more widespread use of a stable isotope technique to assess body composition in different population groups to address priority areas in public health nutrition in Member States. It has done this by supporting national and regional nutrition projects through its technical cooperation programme and coordinated research projects over many years. This publication was developed by an international group of experts to provide practical hands-on guidance in the use of this technique in settings where analysis of stable isotope ratios in biological samples is to be made by isotope ratio mass spectrometry. The publication is targeted at new users of this technique, for example nutritionists, analytical chemists and other professionals. More detailed information on the theoretical background and the practical applications of state of the art methodologies to monitor changes in body composition can be found in IAEA Human Health Series No. 3, Assessment of Body Composition and Total Energy Expenditure in Humans by Stable Isotope Techniques

A direct localization of a fast radio burst and its host.

Science.gov (United States)

Chatterjee, S; Law, C J; Wharton, R S; Burke-Spolaor, S; Hessels, J W T; Bower, G C; Cordes, J M; Tendulkar, S P; Bassa, C G; Demorest, P; Butler, B J; Seymour, A; Scholz, P; Abruzzo, M W; Bogdanov, S; Kaspi, V M; Keimpema, A; Lazio, T J W; Marcote, B; McLaughlin, M A; Paragi, Z; Ransom, S M; Rupen, M; Spitler, L G; van Langevelde, H J

2017-01-04

Fast radio bursts are astronomical radio flashes of unknown physical nature with durations of milliseconds. Their dispersive arrival times suggest an extragalactic origin and imply radio luminosities that are orders of magnitude larger than those of all known short-duration radio transients. So far all fast radio bursts have been detected with large single-dish telescopes with arcminute localizations, and attempts to identify their counterparts (source or host galaxy) have relied on the contemporaneous variability of field sources or the presence of peculiar field stars or galaxies. These attempts have not resulted in an unambiguous association with a host or multi-wavelength counterpart. Here we report the subarcsecond localization of the fast radio burst FRB 121102, the only known repeating burst source, using high-time-resolution radio interferometric observations that directly image the bursts. Our precise localization reveals that FRB 121102 originates within 100 milliarcseconds of a faint 180-microJansky persistent radio source with a continuum spectrum that is consistent with non-thermal emission, and a faint (twenty-fifth magnitude) optical counterpart. The flux density of the persistent radio source varies by around ten per cent on day timescales, and very long baseline radio interferometry yields an angular size of less than 1.7 milliarcseconds. Our observations are inconsistent with the fast radio burst having a Galactic origin or its source being located within a prominent star-forming galaxy. Instead, the source appears to be co-located with a low-luminosity active galactic nucleus or a previously unknown type of extragalactic source. Localization and identification of a host or counterpart has been essential to understanding the origins and physics of other kinds of transient events, including gamma-ray bursts and tidal disruption events. However, if other fast radio bursts have similarly faint radio and optical counterparts, our findings imply that

Pb isotopes as tracers of mining-related Pb in lichens, seaweed and mussels near a former Pb-Zn mine in West Greenland

DEFF Research Database (Denmark)

Søndergaard, Jens; Asmund, Gert; Johansen, Poul

2010-01-01

Identification of mining-related contaminants is important in order to assess the spreading of contaminants from mining as well as for site remediation purposes. This study focuses on lead (Pb) contamination in biota near the abandoned ‘Black Angel Mine’ in West Greenland in the period 1988–2008....... mining pollution. Lead isotopes can be used to monitor uptake of mining-related lead in lichens, seaweed and mussels.......Identification of mining-related contaminants is important in order to assess the spreading of contaminants from mining as well as for site remediation purposes. This study focuses on lead (Pb) contamination in biota near the abandoned ‘Black Angel Mine’ in West Greenland in the period 1988...

Spatial distribution sampling and Monte Carlo simulation of radioactive isotopes

CERN Document Server

Krainer, Alexander Michael

2015-01-01

This work focuses on the implementation of a program for random sampling of uniformly spatially distributed isotopes for Monte Carlo particle simulations and in specific FLUKA. With FLUKA it is possible to calculate the radio nuclide production in high energy fields. The decay of these nuclide, and therefore the resulting radiation field, however can only be simulated in the same geometry. This works gives the tool to simulate the decay of the produced nuclide in other geometries. With that the radiation field from an irradiated object can be simulated in arbitrary environments. The sampling of isotope mixtures was tested by simulating a 50/50 mixture of $Cs^{137}$ and $Co^{60}$. These isotopes are both well known and provide therefore a first reliable benchmark in that respect. The sampling of uniformly distributed coordinates was tested using the histogram test for various spatial distributions. The advantages and disadvantages of the program compared to standard methods are demonstrated in the real life ca...

Particle identification method in the CsI(Tl) scintillator used for the CHIMERA 4 pi detector

CERN Document Server

Alderighi, M; Basssini, R; Berceanu, I; Blicharska, J; Boiano, C; Borderie, B; Bougault, R; Bruno, M; Cali, C; Cardella, G; Cavallaro, S; D'Agostino, M; D'andrea, M; Dayras, R; De Filippo, E; Fichera, F; Geraci, E; Giustolisi, F; Grzeszczuk, A; Guardone, N; Guazzoni, P; Guinet, D; Iacono-Manno, M; Kowalski, S; La Guidara, E; Lanchais, A L; Lanzalone, G; Lanzanò, G; Le Neindre, N; Li, S; Maiolino, C; Majka, Z; Manfredi, G; Nicotra, D; Paduszynski, T; Pagano, A; Papa, M; Petrovici, C M; Piasecki, E; Pirrone, S; Politi, G; Pop, A; Porto, F; Rivet, M F; Rosato, E; Sacca, G; Sechi, G; Simion, V; Sperduto, M L; Steckmeyer, J C; Trifiró, A; Trimarchi, M; Urso, S; Vannini, G; Vigilante, M; Wilczynski, J; Wu, H; Xiao, Z; Zetta, L; Zipper, W

2002-01-01

The charged particle identification obtained by the analysis of signals coming from the CsI(Tl) detectors of the CHIMERA 4 pi heavy-ion detector is presented. A simple double-gate integration method, with the use of the cyclotron radiofrequency as reference time, results in low thresholds for isotopic particle identification. The dependence of the identification quality on the gate generation timing is discussed. Isotopic identification of light ions up to Beryllium is clearly seen. For the first time also the identification of Z=5 particles is observed. The identification of neutrons interacting with CsI(Tl) by (n,alpha) and (n,gamma) reactions is also discussed.

Radio stars

International Nuclear Information System (INIS)

Hjellming, R.M.

1976-01-01

Any discussion of the radio emission from stars should begin by emphasizing certain unique problems. First of all, one must clarify a semantic confusion introduced into radio astronomy in the late 1950's when most new radio sources were described as radio stars. All of these early 'radio stars' were eventually identified with other galactic and extra-galactic objects. The study of true radio stars, where the radio emission is produced in the atmosphere of a star, began only in the 1960's. Most of the work on the subject has, in fact, been carried out in only the last few years. Because the real information about radio stars is quite new, it is not surprising that major aspects of the subject are not at all understood. For this reason this paper is organized mainly around three questions: what is the available observational information; what physical processes seem to be involved; and what working hypotheses look potentially fruitful. (Auth.)

Availability and use of medical isotopes in Canada : performed as part of a radiological terrorism risk assessment. Technical memorandum

International Nuclear Information System (INIS)

Larsson, C.L.

2004-12-01

An assessment of the availability of radioactive material used for medical applications in Canada has been performed as part of the CBRN Research and Technology Initiative (CRTI) Project CRTI-02-0024RD (Probabilistic Risk Assessment Tool for Radiological Dispersal Devices). A general list of medical radioisotopes used worldwide was compiled via literature searches and Internet investigations. This list was then compared to all isotopes licenced to healthcare facilities in Canada. Sources of lesser concern for this study, such as noble gases, short-lived isotopes, and radioisotopes not licenced for medical applications in Canada, were eliminated. The remaining sources were then analysed for frequency of use and maximum licenced activity to assess which materials would be of highest concern in relation to radiological terrorism. A detailed description of the application, typical administered activity, and other relevant information for these most common and highest licenced activity medical sources was assembled to feed directly into the risk assessment database. A general discussion of security in healthcare facilities is also given. Due to the constant advances made in medicine, the information relating to licenced isotopes is dynamic and thus requires updating to ensure the database is kept current. (author)

Elaboration of methods for assessment of radio-ecological safety state of objects, situated on the territories contaminated with Chernobyl radionuclides

International Nuclear Information System (INIS)

Saltanov, Eugene; Saltanova, Irina

2008-01-01

The main purpose of assessment of radio-ecological state of object is to elaborate recommendations to reduce both radiation dose and negative action of other contaminators on human organism. The basis of objects' ecological safety assessment is considering complex influence of multiple negative factors, such as radioactive contamination, firstly, and air, water, soil and noise pollution, secondly. The objects of assessments are social, industrial, rural enterprises and their production: school buildings and territories, all kinds of recreational institutions, civil buildings, etc. The described method is embodied in a computer program, which enables calculation of integral indicator of contamination and gives information about object's safety state. The results of the work may be proposed to the corresponding supervisor institutions as a prototype of practical guidance to control ecological state of the objects and territories. Particularly, the proposed methods are necessary to determine the order of measures, normally undertaken to deactivate objects, and to provide unified approach to radio-ecological safety assessment of objects, situated in the territories contaminated with Chernobyl radionuclides. (author)

Assessment of international reference materials for isotope-ratio analysis (IUPAC Technical Report)

Science.gov (United States)

Brand, Willi A.; Coplen, Tyler B.; Vogl, Jochen; Rosner, Martin; Prohaska, Thomas

2014-01-01

Since the early 1950s, the number of international measurement standards for anchoring stable isotope delta scales has mushroomed from 3 to more than 30, expanding to more than 25 chemical elements. With the development of new instrumentation, along with new and improved measurement procedures for studying naturally occurring isotopic abundance variations in natural and technical samples, the number of internationally distributed, secondary isotopic reference materials with a specified delta value has blossomed in the last six decades to more than 150 materials. More than half of these isotopic reference materials were produced for isotope-delta measurements of seven elements: H, Li, B, C, N, O, and S. The number of isotopic reference materials for other, heavier elements has grown considerably over the last decade. Nevertheless, even primary international measurement standards for isotope-delta measurements are still needed for some elements, including Mg, Fe, Te, Sb, Mo, and Ge. It is recommended that authors publish the delta values of internationally distributed, secondary isotopic reference materials that were used for anchoring their measurement results to the respective primary stable isotope scale.

Interference analysis for UAV connectivity over LTE using aerial radio measurements

DEFF Research Database (Denmark)

Kovacs, Istvan; Amorim, Rafhael Medeiros de; Nguyen, Huan Cong

2017-01-01

. In this paper, we use empirical measurements in live rural LTE networks to assess the impact of uplink and downlink radio interference on the UAV radio connectivity performance. Further, we provide a baseline analysis on the potential of interference mitigation schemes, needed to provide a reliable radio...... for these services is that the radio communication link must reliably cover a wide(er) area, when compared to the visual-line-of-sight range radio links currently used. Standardized cellular systems such as Long Term Evolution UMTS (LTE), are an obvious candidate to provide the radio communication link to UAVs...

Radio Selection of the Most Distant Galaxy Clusters

Science.gov (United States)

Daddi, E.; Jin, S.; Strazzullo, V.; Sargent, M. T.; Wang, T.; Ferrari, C.; Schinnerer, E.; Smolčić, V.; Calabró, A.; Coogan, R.; Delhaize, J.; Delvecchio, I.; Elbaz, D.; Gobat, R.; Gu, Q.; Liu, D.; Novak, M.; Valentino, F.

2017-09-01

We show that the most distant X-ray-detected cluster known to date, Cl J1001 at {z}{spec}=2.506, hosts a strong overdensity of radio sources. Six of them are individually detected (within 10\\prime\\prime ) in deep 0\\buildrel{\\prime\\prime}\\over{.} 75 resolution VLA 3 GHz imaging, with {S}3{GHz}> 8 μ {Jy}. Of the six, an active galactic nucleus (AGN) likely affects the radio emission in two galaxies, while star formation is the dominant source powering the remaining four. We searched for cluster candidates over the full COSMOS 2 deg2 field using radio-detected 3 GHz sources and looking for peaks in {{{Σ }}}5 density maps. Cl J1001 is the strongest overdensity by far with > 10σ , with a simple {z}{phot}> 1.5 preselection. A cruder photometric rejection of zsamples of the first generation of forming galaxy clusters. In these remarkable structures, widespread star formation and AGN activity of massive galaxy cluster members, residing within the inner cluster core, will ultimately lead to radio continuum as one of the most effective means for their identification, with detection rates expected in the ballpark of 0.1-1 per square degree at z≳ 2.5. Samples of hundreds such high-redshift clusters could potentially constrain cosmological parameters and test cluster and galaxy formation models.

Identification of Groundwater Nitrate Contamination from Explosives Used in Road Construction: Isotopic, Chemical, and Hydrologic Evidence.

Science.gov (United States)

Degnan, James R; Böhlke, J K; Pelham, Krystle; Langlais, David M; Walsh, Gregory J

2016-01-19

Explosives used in construction have been implicated as sources of NO3(-) contamination in groundwater, but direct forensic evidence is limited. Identification of blasting-related NO3(-) can be complicated by other NO3(-) sources, including agriculture and wastewater disposal, and by hydrogeologic factors affecting NO3(-) transport and stability. Here we describe a study that used hydrogeology, chemistry, stable isotopes, and mass balance calculations to evaluate groundwater NO3(-) sources and transport in areas surrounding a highway construction site with documented blasting in New Hampshire. Results indicate various groundwater responses to contamination: (1) rapid breakthrough and flushing of synthetic NO3(-) (low δ(15)N, high δ(18)O) from dissolution of unexploded NH4NO3 blasting agents in oxic groundwater; (2) delayed and reduced breakthrough of synthetic NO3(-) subjected to partial denitrification (high δ(15)N, high δ(18)O); (3) relatively persistent concentrations of blasting-related biogenic NO3(-) derived from nitrification of NH4(+) (low δ(15)N, low δ(18)O); and (4) stable but spatially variable biogenic NO3(-) concentrations, consistent with recharge from septic systems (high δ(15)N, low δ(18)O), variably affected by denitrification. Source characteristics of denitrified samples were reconstructed from dissolved-gas data (Ar, N2) and isotopic fractionation trends associated with denitrification (Δδ(15)N/Δδ(18)O ≈ 1.31). Methods and data from this study are expected to be applicable in studies of other aquifers affected by explosives used in construction.

From position-specific isotope labeling towards soil fluxomics: a novel toolbox to assess the microbial impact on biogeochemical cycles

Science.gov (United States)

Apostel, C.; Dippold, M. A.; Kuzyakov, Y.

2015-12-01

Understanding the microbial impact on C and nutrient cycles is one of the most important challenges in terrestrial biogeochemistry. Transformation of low molecular weight organic substances (LMWOS) is a key step in all biogeochemical cycles because 1) all high molecular substances pass the LMWOS pool during their degradation and 2) only LMWOS can be taken up by microorganisms intact. Thus, the transformations of LMWOS are dominated by biochemical pathways of the soil microorganisms. Thus, understanding fluxes and transformations in soils requires a detailed knowledge on the microbial metabolic network and its control mechanism. Tracing C fate in soil by isotopes became on of the most applied and promising biogeochemistry tools but studies were nearly exclusively based on uniformly labeled substances. However, such tracers do not allow the differentiation of the intact use of the initial substances from its transformation to metabolites. The novel tool of position-specific labeling enables to trace molecule atoms separately and thus to determine the cleavage of molecules - a prerequisite for metabolic tracing. Position-specific labeling of basic metabolites and quantification of isotope incorporation in CO2 and bulk soil enabled following the basic metabolic pathways of microorganisms. However, the combination of position-specific 13C labeling with compound-specific isotope analysis of microbial biomarkers and metabolites like phospholipid fatty acids (PLFA) or amino sugars revealed new insights into the soil fluxome: First, it enables tracing specific anabolic pathways in diverse microbial communities in soils e.g. carbon starvation pathways versus pathways reflecting microbial growth. Second, it allows identification of specific pathways of individual functional microbial groups in soils in situ. Tracing metabolic pathways and understanding their regulating factors are crucial for soil C fluxomics i.e. the unravaling of the complex network of C transformations

The use of stable isotopes and gas chromatography/mass spectrometry in the identification of steroid metabolites in the equine

International Nuclear Information System (INIS)

Houghton, E.; Dumasia, M.C.; Teale, P.; Smith, S.J.; Cox, J.; Marshall, D.; Gower, D.B.

1990-01-01

Stable isotope gas chromatography/mass spectrometry has been used successfully in the elucidation of structures of urinary steroid metabolites in the horse and in the identification of metabolites isolated from in vivo perfusion and in vitro incubation studies using equine tissue preparations. Deuterium-labeled steroids, testosterone, dehydroepiandrosterone, and 5-androstene-3 beta,17 beta-diol have been synthesized by base-catalyzed isotope exchange methods and the products characterized by gas chromatography/mass spectrometry. [16,16(-2)H2]Dehydroepiandrosterone (plus radiolabeled dehydroepiandrosterone) was perfused into a testicular artery of a pony stallion and was shown to be metabolized into 2H2-labeled testosterone, 4-androstenedione, isomers of 5-androstene-3,17-diol, 19-hydroxytestosterone, and 19-hydroxy-4-androstenedione. In further studies, equine testicular minces have been incubated with 2H2-labeled and radiolabeled dehydroepiandrosterone and 5-androstene-3 beta, 17 beta-diol. The metabolites, whose identity was confirmed by stable isotope gas chromatography/mass spectrometry, proved the interconversion of the two substrates, as well as formation of testosterone and 4-androstenedione. The aromatization of dehydroepiandrosterone was also confirmed, together with the formation of an isomer of 5(10)-estrene-3,17-diol from both substrates showing 19-demethylation without concomitant aromatization. In studies of the feto-placental unit, the allantochorion was shown to aromatize [2H5]testosterone to [2H4]estradiol, the loss of one 2H from the substrate being consistent with aromatization of the A ring. The formation of 6-hydroxyestradiol was also confirmed in this study. The same technique has been valuable in determining the structure of two metabolites of nandrolone isolated from horse urine

Hot vacuum extraction-isotopic dilution mass spectrometry for determination of hydrogen isotopes in zircaloys

International Nuclear Information System (INIS)

Shi, Y.; Leeson, P.K.; Wilkin, D.; Britton, A.; Macleod, R.

2016-01-01

A hot vacuum extraction-isotope dilution mass spectrometry (HVE-IDMS) was studied for determination of hydrogen isotopes in zirconium metal and alloys as nuclear reactor materials. A theoretical assessment of the completeness of the extraction of hydrogen isotopes under the chosen condition was carried out based on the hydrogen and deuterium solubility data for zirconium. The optimal isotopic spiking condition for conventional IDMS was further explored for the special case IDMS where the isotope abundance of the samples is varied and non-natural. Applying the optimal conditions, the accurate IDMS determination was realized. The agreement between the measured values and the certified or prepared values of standard reference materials and homemade standard materials validate the method developed. (author)

Identification of short-lived neutron-rich ruthenium and rhodium isotopes in fission

International Nuclear Information System (INIS)

Franz, G.; Herrmann, G.

1975-01-01

Short-lived ruthenium and rhodium isotopes ( 107 Ru, 108 Ru, 108 Rh, 109 Ru, 109 Rh, 110 Ru, 110 Rh, 111 Ru, 111 Rh, 112 Ru, 112 Rh, 113 Ru) have been separated from fission products by a rapid chemical procedure and identified by means of γ-ray spectroscopy. Nuclides with half-lives down to 3 sec were accessible. Ruthenium isotopes up to mass number 113 have been identified. (author)

SURVEY PERILAKU MENDENGARKAN RADIO DI JAKARTA

Directory of Open Access Journals (Sweden)

Siti Dewi Sri Ratna Sari

2016-05-01

Full Text Available This research is to find out the profile of radio broadcasting’s content in Jakarta and to look for measured data as the parameter to assess radio broadcasting programs and the radio listeners profile in DKI Jakarta. The research methodology is survey with 1000 respondents as the sample with 2.24% margin of error and 95% credibility level. The sampling method used is Multistage Random Sampling from 5 out of 6 DKI Jakarta Province areas, except Thousand Islands Regency. Data collection technique used is face to face personal interview by giving gift to the respondents. Research result describes the profile of radio listeners is middle class productive age working men and women whose prime reason listening to radio is music as their pastime. Respondents are categorized as medium listeners with 1.87 hour as their average of listening to radio. Nevertheless, the prime time is covering the whole day both while they are listening at home and while they are mobile. Research found that respondents are already satisfied by the radio programs in Jakarta. The competition of radio stations in Jakarta based on their listeners is Gen FM at the top with 44.6%, followed by Bens Radio, Elshinta, I-Radio, Prambors, CBB, and so on. An interesting finding is that radio’s function to deliver social communication is fulfilled by placing religious speech and information as the second and the third most preferable programs with 9.8% and 8.0% below music program.   Penelitian ini bertujuan untuk mengetahui profil isi siaran radio yang selama ini bersiaran di Jakarta sekaligus mencari data terukur sebagai parameter untuk melakukan penilaian terhadap program isi siaran radio, termasuk pola mendengarkan radio pendengar radio seperti durasi dan tempat di provinsi DKI Jakarta. Metode penelitian berupa survei dengan sampel yang diambil sebanyak 1000 responden, margin of error 2.24% dan tingkat kepercayaan 95%. Metode pengambilan sampel dalam penelitian ini adalah dengan

Characterization of tumorigenicity and radio-sensitivity markers by an ex vivo approach. In vivo identification of p53 dependent radio-sensitivity markers

International Nuclear Information System (INIS)

Alvarez, S.

2003-12-01

After a detailed discussion of the relationship between cancer and genetic instability, of the structure, activation mechanisms, activity and biological functions of the p53 protein, a presentation of p53 mutants, and a recall of the effects of ionizing radiations, the author reports a biology research during which he investigated a cell model established from rat embryo lungs treated with Benzo[a]pyrene and made of tumoral lines muted by the p53 gene. He tried to identify markers which could report differences of tumorigenicity and radio-sensitivity observed in these different lines. He also tried to characterize radio-sensitivity molecular markers dependent on the p53 gene in a context of normal cells

Radio Frequency Identification in Construction Operation and Maintenance

DEFF Research Database (Denmark)

Sørensen, Kristian Birch; Christiansson, Per; Svidt, Kjeld

2008-01-01

As early as in 1995 it was stated that automatic identification of objects using RFID was a promising technology for the construction industry. However, 13 years later the applications of RFID in the construction industry are rare and mostly used in prototype projects or used for theft prevention...

Radio stars

International Nuclear Information System (INIS)

Hjellming, R.M.; Gibson, D.M.

1985-01-01

Studies of stellar radio emission became an important field of research in the 1970's and have now expanded to become a major area of radio astronomy with the advent of new instruments such as the Very Large Array in New Mexico and transcontinental telescope arrays. This volume contains papers from the workshop on stellar continuum radio astronomy held in Boulder, Colorado, and is the first book on the rapidly expanding field of radio emission from stars and stellar systems. Subjects covered include the observational and theoretical aspects of stellar winds from both hot and cool stars, radio flares from active double star systems and red dwarf stars, bipolar flows from star-forming regions, and the radio emission from X-ray binaries. (orig.)

IRAS observations of radio-quiet and radio-loud quasars

Science.gov (United States)

Neugebauer, G.; Soifer, B. T.; Miley, G.; Habing, H. J.; Young, E.; Low, F. J.; Beichman, C. A.; Clegg, P. E.; Harris, S.; Rowan-Robinson, M.

1984-01-01

Observations from 12 to 100 microns are presented of two radio-quiet and three radio-loud quasars. Over this wavelength range, all five have grossly similar continuum energy distributions. The continua of the radio-loud quasars are consistent with synchrotron radiation. There is an indication, however, of excess 100 micron emission in the two radio-quiet quasars.

Uncertainty assessment in gamma spectrometric measurements of plutonium isotope ratios and age

Energy Technology Data Exchange (ETDEWEB)

Ramebaeck, H., E-mail: henrik.ramebeck@foi.se [Swedish Defence Research Agency, FOI, Division of CBRN Defence and Security, SE-901 82 Umea (Sweden); Chalmers University of Technology, Department of Chemical and Biological Engineering, Nuclear Chemistry, SE-412 96 Goeteborg (Sweden); Nygren, U.; Tovedal, A. [Swedish Defence Research Agency, FOI, Division of CBRN Defence and Security, SE-901 82 Umea (Sweden); Ekberg, C.; Skarnemark, G. [Chalmers University of Technology, Department of Chemical and Biological Engineering, Nuclear Chemistry, SE-412 96 Goeteborg (Sweden)

2012-09-15

A method for the assessment of the combined uncertainty in gamma spectrometric measurements of plutonium composition and age was evaluated. Two materials were measured. Isotope dilution inductively coupled plasma sector field mass spectrometry (ID-ICP-SFMS) was used as a reference method for comparing the results obtained with the gamma spectrometric method for one of the materials. For this material (weapons grade plutonium) the measurement results were in agreement between the two methods for all measurands. Moreover, the combined uncertainty in all isotope ratios considered in this material (R{sub Pu238/Pu239}, R{sub Pu240/Pu239}, R{sub Pu241/Pu239}, and R{sub Am241/Pu241} for age determination) were limited by counting statistics. However, the combined uncertainty for the other material (fuel grade plutonium) were limited by the response fit, which shows that the uncertainty in the response function is important to include in the combined measurement uncertainty of gamma spectrometric measurements of plutonium.

External event Probabilistic Risk Assessment for the High Flux Isotope Reactor (HFIR)

International Nuclear Information System (INIS)

Flanagan, G.F.; Johnson, D.H.; Buttemer, D.; Perla, H.F.; Chien, S.H.

1989-01-01

The High Flux Isotope Reactor (HFIR) is a high performance isotope production and research reactor which has been in operation at Oak Ridge National Laboratory (ORNL) since 1965. In late 1986 the reactor was shut down as a result of discovery of unexpected neutron embrittlement of the reactor vessel. In January of 1988 a level 1 Probabilistic Risk Assessment (PRA) (excluding external events) was published as part of the response to the many reviews that followed the shutdown and for use by ORNL to prioritize action items intended to upgrade the safety of the reactor. A conservative estimate of the core damage frequency initiated by internal events for HFIR was 3.11 x 10 -4 . In June 1989 a draft external events initiated PRA was published. The dominant contributions from external events came from seismic, wind, and fires. The overall external event contribution to core damage frequency is about 50% of the internal event initiated contribution and is dominated by seismic events

System-on-fluidics immunoassay device integrating wireless radio-frequency-identification sensor chips.

Science.gov (United States)

Yazawa, Yoshiaki; Oonishi, Tadashi; Watanabe, Kazuki; Shiratori, Akiko; Funaoka, Sohei; Fukushima, Masao

2014-09-01

A simple and sensitive point-of-care-test (POCT) device for chemiluminescence (CL) immunoassay was devised and tested. The device consists of a plastic flow-channel reactor and two wireless-communication sensor chips, namely, a photo-sensor chip and a temperature-sensor chip. In the flow-channel reactor, a target antigen is captured by an antibody immobilized on the inner wall of the flow-channel and detected with enzyme labeled antibody by using CL substrate. The CL signal corresponding to the amount of antigen is measured by a newly developed radio-frequency-identification (RFID) sensor, which enables batteryless operation and wireless data communication with an external reader. As for the POCT device, its usage environment, especially temperature, varies for each measurement. Hence, temperature compensation is a key issue in regard to eliminating dark-signal fluctuation, which is a major factor in deterioration of the precision of the POCT device. A two-stage temperature-compensation scheme was adopted. As for the first stage, the signals of two photodiodes, one with an open window and one with a sealed window, integrated on the photo-sensor chip are differentiated to delete the dark signal. As for the second stage, the differentiated signal fluctuation caused by a temperature variation is compensated by using the other sensor chip (equipped with a temperature sensor). The dark-level fluctuation caused by temperature was reduced from 0.24 to 0.02 pA/°C. The POCT device was evaluated as a CL immunoassay of thyroid-stimulating hormone (TSH). The flow rate of the CL reagent in the flow channel was optimized. As a result, the detection limit of the POCT device was 0.08 ng/ml (i.e., 0.4 μIU/ml). Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Rapidly Assessing Changes in Bone Mineral Balance Using Natural Stable Calcium Isotopes

Science.gov (United States)

Morgan, J. L. L.; Gordon, G. W.; Romaniello, S. J.; Skulan, J. L.; Smith, S. M.; Anbar, A. D.

2011-01-01

We demonstrate that variations in the Ca isotope ratios in urine rapidly and quantitatively reflect changes in bone mineral balance. This variation occurs because bone formation depletes soft tissue of light Ca isotopes, while bone resorption releases that isotopically light Ca back into soft tissue. In a study of 12 individuals confined to bed rest, a condition known to induce bone resorption, we show that Ca isotope ratios shift in a direction consistent with net bone loss after just 7 days, long before detectible changes in bone density occur. Consistent with this interpretation, the Ca isotope variations track changes observed in N-teleopeptide, a bone resorption biomarker, while bone-specific alkaline phosphatase, a bone formation biomarker, is unchanged. Ca isotopes can in principle be used to quantify net changes in bone mass. Ca isotopes indicate an average loss of 0.62 +/- 0.16 % in bone mass over the course of this 30-day study. The Ca isotope technique should accelerate the pace of discovery of new treatments for bone disease and provide novel insights into the dynamics of bone metabolism.

Radiological impact assessment of the domestic on-road transportation of radioactive isotope wastes

Energy Technology Data Exchange (ETDEWEB)

Seo, Myung Hwan; Hong, Sung Wook; Park, Jin Beak [Korea Radioactive Waste Agency, Technology Institute, Daejeon (Korea, Republic of)

2016-09-15

Korea Radioactive Waste Agency (KORAD) began to operate the low and intermediate level radioactive waste disposal facility in Gyeongju and to transport the radioactive waste containing radioactive isotopes from Daejeon to the disposal facility for the first time at 2015. For this radioactive waste transportation, in this study, radiological impact assessment is carried out for workers and public. The dose rate to workers and public during the transportation is estimated with consideration of the transportation scenarios and is compared with the Korean regulatory limit. The sensitivity analysis is carried out by considering both the variation of release ratios of the radioactive isotopes from the waste and the variation of the distances between the radioactive waste drum and worker during loading and unloading of radioactive waste. As for all the transportation scenarios, radiological impacts for workers and public have met the regulatory limits.

Towards low-delay and high-throughput cognitive radio vehicular networks

Directory of Open Access Journals (Sweden)

Nada Elgaml

2017-12-01

Full Text Available Cognitive Radio Vehicular Ad-hoc Networks (CR-VANETs exploit cognitive radios to allow vehicles to access the unused channels in their radio environment. Thus, CR-VANETs do not only suffer the traditional CR problems, especially spectrum sensing, but also suffer new challenges due to the highly dynamic nature of VANETs. In this paper, we present a low-delay and high-throughput radio environment assessment scheme for CR-VANETs that can be easily incorporated with the IEEE 802.11p standard developed for VANETs. Simulation results show that the proposed scheme significantly reduces the time to get the radio environment map and increases the CR-VANET throughput.

Energy measurement and fragment identification using digital signals from partially depleted Si detectors

International Nuclear Information System (INIS)

Pasquali, G.; Pastore, G.; Barlini, S.; Bini, M.; Poggi, G.; Stefanini, A.A.; Valdre, S.; Le Neindre, N.; Bougault, R.; Lopez, O.; Vient, E.; Ademard, G.; Borderie, B.; Edelbruck, P.; Rivet, M.F.; Salomon, F.; Bonnet, E.; Chbihi, A.; Frankland, J.D.; Gruyer, D.; Casini, G.; Olmi, A.; Piantelli, S.; Cinausero, M.; Gramegna, F.; Marchi, T.; Duenas, J.A.; Kordyasz, A.; Kozik, T.; Twarog, T.; Morelli, L.; Ordine, A.; Parlog, M.; Rosato, E.; Spadaccini, G.; Alba, R.; Maiolino, C.; Santonocito, D.

2014-01-01

A study of identification properties of a Si-Si ΔE-E telescope exploiting an underdepleted residual-energy detector has been performed. Five different bias voltages have been used, one corresponding to full depletion, the others associated with a depleted layer ranging from 90% to 60% of the detector thickness. Fragment identification has been performed using either the ΔE-E technique or the Pulse Shape Analysis (PSA). Both detectors are reverse mounted: particles enter from the low field side, to enhance the PSA performance. The achieved charge and mass resolution has been quantitatively expressed using a Figure of Merit (FoM). Charge collection efficiency has been evaluated and the possibility of energy calibration corrections has been considered. We find that the ΔE-E performance is not affected by incomplete depletion even when only 60% of the wafer is depleted. Isotopic separation capability improves at lower bias voltages with respect to full depletion, though charge identification thresholds are higher than at full depletion. Good isotopic identification via PSA has been obtained from a partially depleted detector, whose doping uniformity is not good enough for isotopic identification at full depletion. (orig.)

Energy measurement and fragment identification using digital signals from partially depleted Si detectors

Energy Technology Data Exchange (ETDEWEB)

Pasquali, G.; Pastore, G.; Barlini, S.; Bini, M.; Poggi, G.; Stefanini, A.A.; Valdre, S. [Universita di Firenze, Dipartimento di Fisica, Sesto Fiorentino (Italy); INFN, Sezione di Firenze, Sesto Fiorentino (Italy); Le Neindre, N.; Bougault, R.; Lopez, O.; Vient, E. [ENSICAEN et Universite de Caen, LPC, IN2P3-CNRS, Caen-Cedex (France); Ademard, G.; Borderie, B.; Edelbruck, P.; Rivet, M.F.; Salomon, F. [Universite Paris-Sud 11, Institut de Physique Nucleaire, CNRS/IN2P3, Orsay cedex (France); Bonnet, E.; Chbihi, A.; Frankland, J.D.; Gruyer, D. [CEA/DSM-CNRS/IN2P3, GANIL, B.P. 5027, Caen cedex (France); Casini, G.; Olmi, A.; Piantelli, S. [INFN, Sezione di Firenze, Sesto Fiorentino (Italy); Cinausero, M.; Gramegna, F.; Marchi, T. [INFN-LNL Legnaro, Legnaro (Padova) (Italy); Duenas, J.A. [FCCEE Universidad de Huelva, Departamento de Fisica Aplicada, Huelva (Spain); Kordyasz, A. [University of Warsaw, Heavy Ion Laboratory, Warsaw (Poland); Kozik, T.; Twarog, T. [Institute of Nuclear Physics IFJ-PAN, Jagiellonian University, Krakow (Poland); Morelli, L. [INFN, Bologna (Italy); Universita di Bologna, Bologna (Italy); Ordine, A. [INFN, Sezione di Napoli, Napoli (Italy); Parlog, M. [ENSICAEN et Universite de Caen, LPC, IN2P3-CNRS, Caen-Cedex (France); ' ' Horia Hulubei' ' National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Rosato, E.; Spadaccini, G. [INFN, Sezione di Napoli, Napoli (Italy); Universita di Napoli ' ' Federico II' ' , Dipartimento di Fisica, Napoli (Italy); Alba, R.; Maiolino, C.; Santonocito, D. [INFN-LNS Catania, Catania (Italy); Collaboration: FAZIA Collaboration

2014-05-15

A study of identification properties of a Si-Si ΔE-E telescope exploiting an underdepleted residual-energy detector has been performed. Five different bias voltages have been used, one corresponding to full depletion, the others associated with a depleted layer ranging from 90% to 60% of the detector thickness. Fragment identification has been performed using either the ΔE-E technique or the Pulse Shape Analysis (PSA). Both detectors are reverse mounted: particles enter from the low field side, to enhance the PSA performance. The achieved charge and mass resolution has been quantitatively expressed using a Figure of Merit (FoM). Charge collection efficiency has been evaluated and the possibility of energy calibration corrections has been considered. We find that the ΔE-E performance is not affected by incomplete depletion even when only 60% of the wafer is depleted. Isotopic separation capability improves at lower bias voltages with respect to full depletion, though charge identification thresholds are higher than at full depletion. Good isotopic identification via PSA has been obtained from a partially depleted detector, whose doping uniformity is not good enough for isotopic identification at full depletion. (orig.)

Lead isotope ratio analysis of bullet samples by using quadrupole ICP-MS

International Nuclear Information System (INIS)

Tamura, Shu-ichi; Hokura, Akiko; Nakai, Izumi; Oishi, Masahiro

2006-01-01

The measurement conditions for the precise analysis of the lead stable isotope ratio by using an ICP-MS equipped with a quadrupole mass spectrometer were studied in order to apply the technique to the forensic identification of bullet samples. The values of the relative standard deviation obtained for the ratio of 208 Pb/ 206 Pb, 207 Pb/ 206 Pb and 204 Pb/ 206 Pb were lower than 0.2% after optimization of the analytical conditions, including the optimum lead concentration of the sample solution to be about 70 ppb and an integration time for 1 m/s of 15 s. This method was applied to an analysis of lead in bullets for rifles and handguns; a stable isotope ratio of lead was found to be suitable for the identification of bullets. This study has demonstrated that the lead isotope ratio measured by using a quadrupole ICP-MS was useful for a practical analysis of bullet samples in forensic science. (author)

UHF RFID technologies for identification and traceability

CERN Document Server

Laheurte, Jean-Marc; Paret, Dominique; Loussert, Christophe

2014-01-01

UHF Radio Frequency Identification (RFID) is an electronic tagging technology that allows an object, place or person to be automatically identified at a distance without a direct line-of-sight using a radio wave exchange. Applications include inventory tracking, prescription medication tracking and authentication, secure automobile keys, and access control for secure facilities. This book begins with an overview of UHF RFID challenges describing the applications, markets, trades and basic technologies. It follows this by highlighting the main features distinguishing UHF (860MHz-960MHz) and HF

Radar Emission Sources Identification Based on Hierarchical Agglomerative Clustering for Large Data Sets

Directory of Open Access Journals (Sweden)

Janusz Dudczyk

2016-01-01

Full Text Available More advanced recognition methods, which may recognize particular copies of radars of the same type, are called identification. The identification process of radar devices is a more specialized task which requires methods based on the analysis of distinctive features. These features are distinguished from the signals coming from the identified devices. Such a process is called Specific Emitter Identification (SEI. The identification of radar emission sources with the use of classic techniques based on the statistical analysis of basic measurable parameters of a signal such as Radio Frequency, Amplitude, Pulse Width, or Pulse Repetition Interval is not sufficient for SEI problems. This paper presents the method of hierarchical data clustering which is used in the process of radar identification. The Hierarchical Agglomerative Clustering Algorithm (HACA based on Generalized Agglomerative Scheme (GAS implemented and used in the research method is parameterized; therefore, it is possible to compare the results. The results of clustering are presented in dendrograms in this paper. The received results of grouping and identification based on HACA are compared with other SEI methods in order to assess the degree of their usefulness and effectiveness for systems of ESM/ELINT class.

Leakage Identification Of Volcanic Product Pollutant Of ijen Crater Using Natural Isotop Deuterium And Oxiren-18

International Nuclear Information System (INIS)

Susiati, Heni; Sjarmufni, A.; S.B.S, Yarianto; Suprijadi; Wibagyo

2001-01-01

Community surrounding the Asembagus Sugar Fabric guess that the factory has polluted water body of Banyuputih River. Leakage detection of the pollutant has been to prove that guess using variation of natural isotop composition of Deuterium and Oxygen-18. Sampling was carried out at Ijen crater area, Banyupahit River and surrounding the sugar factory and also Belawan Fresh water source. Isotop analysis was done-by mass spectrometer. Based on analysis result have been gotten information that each location have vary of isotop value, Isotop concentration at Ijen crater was relative high so isotop concentration of Banyupahit river was also relative high although rather lower than lien Crater. Based on another interpretation, there are correlation at isotope concentration between Ijen crater and Banyupahit River

Identification of the geographical place of origin of an unidentified individual by multi-isotope analysis

NARCIS (Netherlands)

Font Morales, L.; van der Peijl, G.J.Q.; van Leeuwen, C.; van Wetten, I.A.; Davies, G.R.

2015-01-01

A multi-isotope investigation (Sr and Pb isotopes and δ18O, δ13C and δ15N) was applied to bone and teeth from an unidentified male found drowned in the"IJ" Ruyterkade in Amsterdam, The Netherlands in March of 1999. The individual remained unidentified until mid 2013, after the isotope study was

Crossed radio-immunoisoelectric focusing as a method of identifying isoallergens: identification of isoallergens in rat urine extracts

International Nuclear Information System (INIS)

Longbottom, J.L.

1984-01-01

A method of 2-dimensional radio-immunoelectrophoresis to detect directly the presence of 'isoallergens' in complex allergenic (skin test) extracts is described. This procedure, in which the components are separated by isoelectric focusing in agarose gel in the first dimension is therefore basically similar to that of crossed radio-immunoelectrophoresis, and hence has been termed crossed radio-immunoisoelectric focusing. The method has been applied to the allergens present in rat urine and has verified the presence of the cross-reacting α 2 -euglobulin and prealbumin components in (at least) 3 and 2 isoallergenic forms respectively. (Auth.)

Stable isotope identification of Greek and Turkish marbles

International Nuclear Information System (INIS)

Coleman, M.; Walker, S.

1979-01-01

Carbon and oxygen isotope analyses have been used to test the provenance of the marble of some Attic sarcophagi in the British Museum collection. Of three believed to be of Pentelic marble, only one has been so confirmed. Analyses of fragmentary sarcophagi of similar workmanship has confirmed their Proconnesian origin. Data from fragments of Sidamara sarcophagi have supplemented observations of technique, finish and dimensions of carved figures and decoration to determine whether the fragments come from the same sarcophagus. (author)

Measurements of the effect of humidity on radio-aerosol penetration through ultrafine capillaries

International Nuclear Information System (INIS)

Cullen, C.

1996-08-01

The purpose of this research was to examine the effects of humidity on radio-aerosol penetration through ultrafine capillaries. A number of tests were conducted at relative humidities of 20%, 50%, and 80%, with sampling times of 20, 40, and 60 min. The radio-aerosol consisted of polystyrene particles with a diameter of 0.1 microm. The ultrafine capillaries had a diameter of 250 microm. The data from these tests varied significantly. These results made the identification of radio-aerosol penetration trends inconclusive. The standard deviation for all penetration data ranged from 3% to 30%. The results of this study suggest that a better control of the experimental parameters was needed to obtain more accurate data from experiments associated with radio-aerosol penetration in the presence of moisture. The experimental parameters that may have contributed to the wide variance of data, include aerosol flow, radio-aerosol generation, capillary characteristics, humidity control, and radiation measurements. It was the uncertainty of these parameters that contributed to the poor data which made conclusive deductions about radio-aerosol penetration dependence on humidity difficult. The application of this study is to ultrafine leaks resulting from stress fractures in high-level nuclear waste transportation casks under accident scenarios

Biosynthetic effects on the stable carbon isotopic compositions of agal lipids: Implications for deciphering the carbon isotopic biomarker record

NARCIS (Netherlands)

Sinninghe Damsté, J.S.; Schouten, S.; Klein Breteler, W.C.M.; Blokker, P.; Schogt, N.; Rijpstra, W.I.C.; Grice, K.; Baas, M.

1998-01-01

Thirteen species of algae covering an extensive range of classes were cultured and stable carbon isotopic compositions of their lipids were analysed in order to assess carbon isotopic fractionation effects during their biosynthesis. The fatty acids were found to have similar stable carbon isotopic

The importance of Radio Quiet Zone (RQZ) for radio astronomy

Science.gov (United States)

Umar, Roslan; Abidin, Zamri Zainal; Ibrahim, Zainol Abidin

2013-05-01

Most of radio observatories are located in isolated areas. Since radio sources from the universe is very weak, astronomer need to avoid radio frequency interference (RFI) from active spectrum users and radio noise produced by human made (telecommunication, mobile phone, microwave user and many more. There are many observatories around the world are surrounded by a Radio Quiet Zone (RQZ), which is it was set up using public or state laws. A Radio Quiet Zone normally consists of two areas: an exclusive area in which totally radio emissions are forbidden, with restrictions for residents and business developments, and a larger (radius up to 100 km above) coordination area where the power of radio transmission limits to threshold levels. Geographical Information System (GIS) can be used as a powerful tool in mapping large areas with varying RQZ profiles. In this paper, we report the initial testing of the usage of this system in order to identify the areas were suitable for Radio Quiet Zone. Among the important parameters used to develop the database for our GIS are population density, information on TV and telecommunication (mobile phones) transmitters, road networks (highway), and contour shielding. We will also use other information gathered from on-site RFI level measurements on selected 'best' areas generated by the GIS. The intention is to find the best site for the purpose of establishing first radio quiet zones for radio telescope in Malaysia.

Assessment of Cooperative and Heterogeneous Indoor Localization Algorithms with Real Radio Devices

DEFF Research Database (Denmark)

Nielsen, Jimmy Jessen; Noureddine, Hadi; Amiot, Nicolas

2014-01-01

In this paper we present results of real-life local- ization experiments performed in an unprecedented cooperative and heterogeneous wireless context. The experiments covered measurements of different radio devices packed together on a trolley, emulating a multi-standard Mobile Terminal (MT) along...... representative trajectories in a crowded office environment. Among all the radio access technologies involved in this campaign (including LTE, WiFi...), the focus is herein put mostly on Impulse Radio - Ultra Wideband (IR-UWB) and ZigBee sub-systems, which are enabled with peer-to-peer ranging capabilities based...... on Time of Arrival (ToA) estimation and Received Signal Strength (RSS) measurements respectively. Single-link model parameters are preliminarily drawn and discussed. In comparison with existing similar campaigns, new algorithms are also applied to the measurement data, showing the interest of advanced de...

48 CFR 252.211-7006 - Radio Frequency Identification.

Science.gov (United States)

2010-10-01

... supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11: (A... International and the Uniform Code Council to establish and support the EPC network as the global standard for immediate, automatic, and accurate identification of any item in the supply chain of any company, in any...

Isotope hydrology in Latin America

Energy Technology Data Exchange (ETDEWEB)

Payne, B R [International Atomic Energy Agency, Division of Research and Laboratories, Isotope Hydrology Section, Vienna (Austria)

1972-07-01

A wide variety of problems in hydrology have proved susceptible to the use of nuclear techniques. Conclusions may be drawn from the relative abundances of certain 'environmental isotopes', such as heavy stable isotopes of hydrogen and oxygen in water molecules, tritium, carbon-14 and silicon-32, in atmospheric, surface or ground water; origin and rate of flow, for example, may be deduced. Artificial radioisotopes may be used similarly as a logical extension to well-known tracer techniques using dyes and salts. Inherent in the use of such radiotracers are the advantages of very high detection sensitivity (and thus very low required concentrations and the elimination of density effects), and a choice of a variety of nuclides alien to the geohydrological system (and hence unique identification and low background). (author)

COMBINING SOURCES IN STABLE ISOTOPE MIXING MODELS: ALTERNATIVE METHODS

Science.gov (United States)

Stable isotope mixing models are often used to quantify source contributions to a mixture. Examples include pollution source identification; trophic web studies; analysis of water sources for soils, plants, or water bodies; and many others. A common problem is having too many s...

Isotope applications in the environmental field

International Nuclear Information System (INIS)

DeWitt, R.

1978-01-01

Established uses of enriched isotopes in the environmental field were surveyed to determine future trends in isotope needs. Based on established isotope uses, on the projected increase in the pollution problem, and on the apparent social and economic pressure for pollution abatement, a significant demand for enriched isotopes appears to be developing for the assessment and control of air, water, and soil pollutants. Isotopic techniques will be used in combination with conventional methods of detection and measurement, such as gas chromatography, x-ray fluorescence, and atomic absorption. Recent advances in economical isotope separation methods, instrumentation, and methodology promise to place isotopic technology within the reach of most research and industrial institutions. Increased application of isotope techniques appears most likely to occur in areas where data are needed to characterize the movement, behavior, and fate of pollutants in the environment

Application of Isotope techniques in the arid and semi-arid zone hydrology

International Nuclear Information System (INIS)

Gonfiantini, R.; Louvat, D.; Aranyossy, J.F.

1993-01-01

The paper presents a brief introduction on the scientific background of isotope hydrology,and after, explains the applications of environment isotope techniques in groundwater hydrology of the arid and semi-arid zones. It includes the study of aquifer recharge and discharge, identification of palaeorecharge, groundwater movement and age in unconfined and confined aquifers, and interconnections between aquifers. The contribution of isotopes is highlighted with many examples of field case studies, with emphasis on studies carried out with IAEA support. Finally, a short description of IAEA program on isotope hydrology is given, with a list of regional projects supported through the IAEA Technical Cooperation program, and of Coordinated Research Programs. The latter give the modern research trends in isotope application to hydrology and hydrosphere environmental studies. (author). 2 tabs., 25 figs., 69 refs

The excess radio background and fast radio transients

International Nuclear Information System (INIS)

Kehayias, John; Kephart, Thomas W.; Weiler, Thomas J.

2015-01-01

In the last few years ARCADE 2, combined with older experiments, has detected an additional radio background, measured as a temperature and ranging in frequency from 22 MHz to 10 GHz, not accounted for by known radio sources and the cosmic microwave background. One type of source which has not been considered in the radio background is that of fast transients (those with event times much less than the observing time). We present a simple estimate, and a more detailed calculation, for the contribution of radio transients to the diffuse background. As a timely example, we estimate the contribution from the recently-discovered fast radio bursts (FRBs). Although their contribution is likely 6 or 7 orders of magnitude too small (though there are large uncertainties in FRB parameters) to account for the ARCADE 2 excess, our development is general and so can be applied to any fast transient sources, discovered or yet to be discovered. We estimate parameter values necessary for transient sources to noticeably contribute to the radio background

Calculation of the isotope concentrations, source terms and radiation shielding of the SAFARI-1 irradiation products

International Nuclear Information System (INIS)

Stoker, C.C.; Ball, G.

2000-01-01

The ever increasing expansion of the irradiation product portfolio of the SAFARI-1 reactor leads to the need to routinely calculate the radio-isotope concentrations and source terms for the materials irradiated in the reactor accurately. In addition to this, the required shielding for the transportation and processing of these irradiation products needs to be determined. In this paper the calculational methodology applied is described with special attention given to the spectrum dependence of the one-group cross sections of selected SAFARI-1 irradiation materials and the consequent effect on the determination of the isotope concentrations and source terms. Comparisons of the calculated isotopic concentrations and dose rates with experimental analysis and measurements provide confidence in the calculational methodologies and data used. (author)

Design, Fabrication, Installation and Commissioning of the Helium Refrigeration system Supporting Superconducting Radio Frequency Testing at Facility for Rare Isotope Beams at Michigan State University

Science.gov (United States)

Casagrande, F.; Fila, A.; Nguyen, C.; Tatsumoto, H.

2017-12-01

The Facility for Rare Isotope Beams (FRIB) will be a scientific user facility for the Office of Nuclear Physics in the U.S. Department of Energy Office of Science (DOE-SC). The FRIB linear accelerator (LINAC) will be comprised of cryomodules each with multiple Superconducting Radio Frequency (SRF) cavities operating at 2 K. A helium refrigeration system was designed, fabricated, installed and commissioned in the SRF high bay building to test and certify these cavities and cryomodules before installation in the FRIB LINAC tunnel. The helium refrigeration system includes a helium refrigerator which has nominal capacity of 900 W at 4 K, 5000 L liquid helium storage Dewar, helium gas storage, two room temperature vacuum pumps capable of 2.5 g/s each for 2 K testing, purifier, purifier recovery compressor, and the distribution system for liquid nitrogen and helium. The helium refrigeration system is now operational supporting three below grade cavity testing Dewars and one cryomodule testing bunker meeting the required throughput of 1 cavity per day.

Automatic limb identification and sleeping parameters assessment for pressure ulcer prevention.

Science.gov (United States)

Baran Pouyan, Maziyar; Birjandtalab, Javad; Nourani, Mehrdad; Matthew Pompeo, M D

2016-08-01

Pressure ulcers (PUs) are common among vulnerable patients such as elderly, bedridden and diabetic. PUs are very painful for patients and costly for hospitals and nursing homes. Assessment of sleeping parameters on at-risk limbs is critical for ulcer prevention. An effective assessment depends on automatic identification and tracking of at-risk limbs. An accurate limb identification can be used to analyze the pressure distribution and assess risk for each limb. In this paper, we propose a graph-based clustering approach to extract the body limbs from the pressure data collected by a commercial pressure map system. A robust signature-based technique is employed to automatically label each limb. Finally, an assessment technique is applied to evaluate the experienced stress by each limb over time. The experimental results indicate high performance and more than 94% average accuracy of the proposed approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

Stable isotope dimethyl labelling for quantitative proteomics and beyond

Science.gov (United States)

Hsu, Jue-Liang; Chen, Shu-Hui

2016-01-01

Stable-isotope reductive dimethylation, a cost-effective, simple, robust, reliable and easy-to- multiplex labelling method, is widely applied to quantitative proteomics using liquid chromatography-mass spectrometry. This review focuses on biological applications of stable-isotope dimethyl labelling for a large-scale comparative analysis of protein expression and post-translational modifications based on its unique properties of the labelling chemistry. Some other applications of the labelling method for sample preparation and mass spectrometry-based protein identification and characterization are also summarized. This article is part of the themed issue ‘Quantitative mass spectrometry’. PMID:27644970

Identification of metabolically active bacteria in the gut of the generalist Spodoptera littoralis via DNA stable isotope probing using 13C-glucose.

Science.gov (United States)

Shao, Yongqi; Arias-Cordero, Erika M; Boland, Wilhelm

2013-11-13

Guts of most insects are inhabited by complex communities of symbiotic nonpathogenic bacteria. Within such microbial communities it is possible to identify commensal or mutualistic bacteria species. The latter ones, have been observed to serve multiple functions to the insect, i.e. helping in insect reproduction(1), boosting the immune response(2), pheromone production(3), as well as nutrition, including the synthesis of essential amino acids(4,) among others.     Due to the importance of these associations, many efforts have been made to characterize the communities down to the individual members. However, most of these efforts were either based on cultivation methods or relied on the generation of 16S rRNA gene fragments which were sequenced for final identification. Unfortunately, these approaches only identified the bacterial species present in the gut and provided no information on the metabolic activity of the microorganisms. To characterize the metabolically active bacterial species in the gut of an insect, we used stable isotope probing (SIP) in vivo employing (13)C-glucose as a universal substrate. This is a promising culture-free technique that allows the linkage of microbial phylogenies to their particular metabolic activity. This is possible by tracking stable, isotope labeled atoms from substrates into microbial biomarkers, such as DNA and RNA(5). The incorporation of (13)C isotopes into DNA increases the density of the labeled DNA compared to the unlabeled ((12)C) one. In the end, the (13)C-labeled DNA or RNA is separated by density-gradient ultracentrifugation from the (12)C-unlabeled similar one(6). Subsequent molecular analysis of the separated nucleic acid isotopomers provides the connection between metabolic activity and identity of the species. Here, we present the protocol used to characterize the metabolically active bacteria in the gut of a generalist insect (our model system), Spodoptera littoralis (Lepidoptera, Noctuidae). The

Futuristic isotope hydrology in the Gulf region

Science.gov (United States)

Saravana Kumar, U.; Hadi, Khaled

2018-03-01

The Gulf region is one of the most water-stressed parts in the world. Water in the region is very scarce, shortage of supply and lacking of renewable water resources, while the demand for water is growing day by day. It is thus essential to implement modern approaches and technologies in addressing water-related issues. In this context, isotope hydrology will provide invaluable aid. Some of the most important areas of futuristic applications of isotope hydrology include evaluation of aquifer recharge, storage and their recovery system, understanding of dynamic changes due to long-term exploitation of the groundwater, development and management of shared groundwater aquifers, fresh groundwater discharge along the Arabian Gulf, identification and quantification of hydrocarbon contamination in groundwater; soil moisture and solute movement in unsaturated zone, paleoclimate reconstruction, etc. Literature survey suggests, in general, not many isotope studies on the above have been reported.

Sensory sensitivity and identification and hedonic assessment ofolfactory stimuli

Directory of Open Access Journals (Sweden)

Borys Ruszpel

2012-06-01

Full Text Available Conducted research had an exploratory character. It was focused on connections between temperament and olfactory functioning – in particular, identification and affective assessment of olfactory stimuli. Main research question dealt with potential correlations between sensory sensitivity (dimension of temperamental questionnaire FCZ‑KT with declarative and objective ability to identify presented odours and their assessment. Fifty four schoolgirls from one of the Warsaw sec‑ ondary schools participated in the research and they were asked for filling in the FCZ‑KT questionnaire and evaluating each of 16 smell samples. Analyses revealed a significant positive correlation between declared familiarity and accurate odours’ identification (odours that were subjectively known were recognized more accurately than unknown and a posi‑ tive correlation between declared familiarity and affective assessment (odours that were known were assessed as more pleasant than unknown. Sensory sensitivity was not correlated neither with declarative nor real ability to identify smells, however sensory sensitivity was positively correlated with affective assessment (the higher scores on sensory sensitivity dimension, the more pleasantly assessed odours in general. Analyses revealed a number of connections between other dimensions of FCZ‑KT questionnaire (perseverance, liveliness, stamina and the ability (both objective and subjective to correctly identify odours which were most difficult to recognize. Completed project might be perceived as a starting point for further research concerning relationships between temperament, olfactory functioning, and food preferences among patients diagnosed with eating disorders such as anorexia nervosa, bulimia nervosa, and obesity.

Introduction to Body Composition Assessment Using the Deuterium Dilution Technique with Analysis of Urine Samples by Isotope Ratio Mass Spectrometry (French Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA has fostered the more widespread use of a stable isotope technique to assess body composition in different population groups to address priority areas in public health nutrition in Member States. It has done this by supporting national and regional nutrition projects through its technical cooperation programme and coordinated research projects over many years. This publication was developed by an international group of experts to provide practical hands-on guidance in the use of this technique in settings where analysis of stable isotope ratios in biological samples is to be made by isotope ratio mass spectrometry. The publication is targeted at new users of this technique, for example nutritionists, analytical chemists and other professionals. More detailed information on the theoretical background and the practical applications of state of the art methodologies to monitor changes in body composition can be found in IAEA Human Health Series No. 3, Assessment of Body Composition and Total Energy Expenditure in Humans by Stable Isotope Techniques

Introduction to Body Composition Assessment Using the Deuterium Dilution Technique with Analysis of Urine Samples by Isotope Ratio Mass Spectrometry (Spanish Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA has fostered the more widespread use of a stable isotope technique to assess body composition in different population groups to address priority areas in public health nutrition in Member States. It has done this by supporting national and regional nutrition projects through its technical cooperation programme and coordinated research projects over many years. This publication was developed by an international group of experts to provide practical hands-on guidance in the use of this technique in settings where analysis of stable isotope ratios in biological samples is to be made by isotope ratio mass spectrometry. The publication is targeted at new users of this technique, for example nutritionists, analytical chemists and other professionals. More detailed information on the theoretical background and the practical applications of state of the art methodologies to monitor changes in body composition can be found in IAEA Human Health Series No. 3, Assessment of Body Composition and Total Energy Expenditure in Humans by Stable Isotope Techniques

Development of Radio Frequency Antenna Radiation Simulation Software

International Nuclear Information System (INIS)

Mohamad Idris Taib; Rozaimah Abd Rahim; Noor Ezati Shuib; Wan Saffiey Wan Abdullah

2014-01-01

Antennas are widely used national wide for radio frequency propagation especially for communication system. Radio frequency is electromagnetic spectrum from 10 kHz to 300 GHz and non-ionizing. These radiation exposures to human being have radiation hazard risk. This software was under development using LabVIEW for radio frequency exposure calculation. For the first phase of this development, software purposely to calculate possible maximum exposure for quick base station assessment, using prediction methods. This software also can be used for educational purpose. Some results of this software are comparing with commercial IXUS and free ware NEC software. (author)

Application of stable isotopes to hydrogeology in coal mine

International Nuclear Information System (INIS)

Duan Qi; Duan Yucheng

1988-01-01

Stable isotopes including Oxygen-18 and Deuterium have been applied to investigation of hydrogeology in main coal mines. By determination of stable isotopic composition of hydrogen and oxygen together with water analysis, the following studies have been developed: Identification of the hydrogeochemical characteristics of the groundwater from varied aquifers; Analysis of the hydraulic relationship between varied aquifers; Interpretation of the probable recharge source of mine water. The research results mentioned above reveal that: 1. The groundwater from main aquifers at coal mines in north China is of meteoric origin, which is recharged from hilly area surrounding the coal mine. Its isotopic composition differs slightly from that of the local precipitation. 2. There is a mutual hydraulic relationship between the Ordovician and Quarternary aquifers, so the difference of isotopic composition is very small. 3. By way of the variation of isotopic composition of groundwater from coal-bearing strata, we can infer the hydraulic relationship extent between overlaid alluvial layer and underlaid Ordovician limestone. (author). 9 refs, 6 figs, 8 tabs

Radio frequency identification and sensors from rfid to chipless RFID

CERN Document Server

Perret, Etienne

2014-01-01

This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, co

Quantitative identification of nitrate pollution sources and uncertainty analysis based on dual isotope approach in an agricultural watershed.

Science.gov (United States)

Ji, Xiaoliang; Xie, Runting; Hao, Yun; Lu, Jun

2017-10-01

Quantitative identification of nitrate (NO 3 - -N) sources is critical to the control of nonpoint source nitrogen pollution in an agricultural watershed. Combined with water quality monitoring, we adopted the environmental isotope (δD-H 2 O, δ 18 O-H 2 O, δ 15 N-NO 3 - , and δ 18 O-NO 3 - ) analysis and the Markov Chain Monte Carlo (MCMC) mixing model to determine the proportions of riverine NO 3 - -N inputs from four potential NO 3 - -N sources, namely, atmospheric deposition (AD), chemical nitrogen fertilizer (NF), soil nitrogen (SN), and manure and sewage (M&S), in the ChangLe River watershed of eastern China. Results showed that NO 3 - -N was the main form of nitrogen in this watershed, accounting for approximately 74% of the total nitrogen concentration. A strong hydraulic interaction existed between the surface and groundwater for NO 3 - -N pollution. The variations of the isotopic composition in NO 3 - -N suggested that microbial nitrification was the dominant nitrogen transformation process in surface water, whereas significant denitrification was observed in groundwater. MCMC mixing model outputs revealed that M&S was the predominant contributor to riverine NO 3 - -N pollution (contributing 41.8% on average), followed by SN (34.0%), NF (21.9%), and AD (2.3%) sources. Finally, we constructed an uncertainty index, UI 90 , to quantitatively characterize the uncertainties inherent in NO 3 - -N source apportionment and discussed the reasons behind the uncertainties. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Effect of Solar Radiation on Radio Signal for Radio Astronomy Purposes

International Nuclear Information System (INIS)

Nor Hazmin Sabri; Atiq Wahidah Azlan; Roslan Umar; Roslan Umar; Shahirah Syafa Sulan; Zainol Abidin Ibrahim; Wan Zul Adli Wan Mokhtar

2015-01-01

Radio astronomy is a subfields of astronomy which is discovers the celestial objects at radio frequencies. Observation in radio astronomy is conducted using single antenna or array of antennas, known as radio telescope. Other than that, radio astronomy also holds an advantage over other alternatives to optical astronomy due to its capability of observing from the ground level. In this study, the effect of solar radiation that contributes the Radio Frequency Interferences (RFI) is reviewed. The low RFI level is required to set up the radio telescope for radio astronomy observation. The effect of solar radiation on radio signal was investigated by determining the RFI pattern using spectrum analyzer. The solar radiation data was obtained from weather station located at KUSZA Observatory, East Coast Environmental Research Institute (ESERI), UniSZA. We can conclude that the solar radiation factor give the minimum significant effect to radio signal. (author)

Deep brine recognition upstream the EBE syndicate. Geochemical and isotopic investigations. Final report

International Nuclear Information System (INIS)

2009-01-01

The authors report and discuss the results obtained after performing a drilling upstream the drinkable water harnessing field of a water supply syndicate in Alsace (Ensisheim, Bollwiller and surroundings), in order to confirm the existence of a deep brine source. This brine is diluted by recent waters. The first isotopic investigations do not allow the origin of this brine to be identified, but fractures due to some seismic events are suspected. The report presents the drilling and the various aspects of the chemical and isotopic studies (sampling, physico-chemical analysis, dating, identification of various isotopes)

Stable isotope labeled n-alkanes to assess digesta passage kinetics through the digestive tract of ruminants

NARCIS (Netherlands)

Warner, D.; Ferreira, L.M.M.; Breuer, M.J.H.; Dijkstra, J.; Pellikaan, W.F.

2013-01-01

We describe the use of carbon stable isotope (13C) labeled n-alkanes as a potential internal tracer to assess passage kinetics of ingested nutrients in ruminants. Plant cuticular n-alkanes originating from intrinsically 13C labeled ryegrass plants were pulse dosed intraruminally in four

Relationships between occupational functioning and stress among radio journalists--Assessment by means of the Psychosocial Risk Scale.

Science.gov (United States)

Najder, Anna; Merecz-Kot, Dorota; Wójcik, Aleksandra

2016-01-01

Job characteristics and the consequences of everyday stress among radio journalists who are not exposed to traumatic events have not been studied sufficiently before. We aimed at determining the most common job characteristics and their stressfulness; relationships between stress exposure, health and occupational functioning; differences between radio journalists and other journalists, and also the psychosocial risk for health and functioning in this group. The studied group involved 208 journalists, 134 of whom worked in radio stations. The respondents filled in the Psychosocial Risks Scale (PRS) developed by the Department of Health and Work Psychology of the Nofer Institute of Occupational Medicine, Łódź, Poland. Requirement of mental effort and readiness to response quickly for most of the time as well as limited possibilities for promotion were the most frequent journalists' complaints. We confirmed that higher levels of stress resulted in worse functioning--the radio journalists who experienced lower stress assessed their health status and ability to work better, were more satisfied with particular aspects of their work, and were more involved in their work. They also presented a significantly lower turnover intention. Moreover, the radio journalists were more involved in their work than other journalists, but experienced lower satisfaction, took more sick leaves and had more days of absence. Well-known relationships between stress level, satisfaction and occupational functioning were confirmed. The most important conclusion refers to the fact that psychosocial risks and stress analysis should be based on the understanding of specificity of each occupation or even position. It is so, because the same job characteristic may pose a challenge for one person, while for another--it can result in extreme discomfort and anxiety--such an attitude broadens understanding of the phenomenon. We also confirmed that the PRS is a well-designed method, appropriate to

Assessment of patients with diffuse pigmented Villonodular Synovitis of Knee before and after radio-synovectomy

International Nuclear Information System (INIS)

Koca, G.; Ozsoy, H.; Atilgan, H.I.; Baskin, A.; Koray, D.; Fakioglu, O.; Korkmaz, M.

2015-01-01

Full text of publication follows. Aim: the aim of this study was to evaluate subjective and objective findings of patients with diffuse pigmented villonodular synovitis (DPVNS) of knee before and after treatment with Yttrium-90 (Y-90) radio-synovectomy. Materials and methods: between years 2005 and 2013, 23 patients, 15 female and 8 male, who had adjuvant radio-synovectomy after arthroscopic surgery were included to our study. 5 mCi of Y-90 radiocolloid was administered under local anesthesia at least 6 weeks after arthroscopic surgery. The patients were reevaluated 6 months after radio-synovectomy. All the patients were assigned a Lysholm knee score prior to surgery, prior to radio-synovectomy and 6 months after radio-synovectomy. Lysholm score was calculated according to patients' pain, swelling, instability, locking, limping, support, climbing the stairs, squatting and the highest evaluation score was 100. In addition modified Marshall scoring system was calculated according to objective and subjective findings of the patients prior to surgery and six months after radio-synovectomy. The highest evaluation score was 30 in modified Marshall scoring system where 19 points were provided by objective findings and 11 points were provided by subjective findings. Scores higher than 26 were defined as very good, between 21-25 was good, between 16-20 was medium, and values less than 16 points are considered to be poor. The obtained points using scoring systems were evaluated statistically. Results: the mean age was (31.7 ± 13.2) years. The average time period between the operation and radio-synovectomy was (12.8 ± 8.14) weeks. The calculated Lysholm scores prior to surgery, prior to radio-synovectomy and 6 months after radio-synovectomy were (38.8 ± 4.1), (60.0 ± 4.4) and (82.9 ± 6.5), respectively (p <0.001). Modified Marshall scores prior to surgery, and 6 months after radio-synovectomy, was (12.4 ± 2.7) and (25.5 ± 3.1) respectively (p <0.001). Conclusion

Radio frequency integrated circuit design for cognitive radio systems

CERN Document Server

Fahim, Amr

2015-01-01

This book fills a disconnect in the literature between Cognitive Radio systems and a detailed account of the circuit implementation and architectures required to implement such systems.  Throughout the book, requirements and constraints imposed by cognitive radio systems are emphasized when discussing the circuit implementation details.  In addition, this book details several novel concepts that advance state-of-the-art cognitive radio systems.  This is a valuable reference for anybody with background in analog and radio frequency (RF) integrated circuit design, needing to learn more about integrated circuits requirements and implementation for cognitive radio systems. ·         Describes in detail cognitive radio systems, as well as the circuit implementation and architectures required to implement them; ·         Serves as an excellent reference to state-of-the-art wideband transceiver design; ·         Emphasizes practical requirements and constraints imposed by cognitive radi...

Stable Isotope Systematics of Martian Perchlorate

Science.gov (United States)

Martin, P.; Farley, K. A.; Archer, D., Jr.; Atreya, S. K.; Conrad, P. G.; Eigenbrode, J. L.; Fairen, A.; Franz, H. B.; Freissinet, C.; Glavin, D. P.; Mahaffy, P. R.; Malespin, C.; Ming, D. W.; Navarro-Gonzalez, R.; Sutter, B.

2015-12-01

Chlorine isotopic compositions in HCl released during evolved gas analysis (EGA) runs have been detected by the Sample Analysis at Mars (SAM) instrument on the Curiosity rover ranging from approximately -9‰ to -50‰ δ37Cl, with two spatially and isotopically separated groups of samples averaging -15‰ and -45‰. These extremely low values are the first such detection of any known natural material; common terrestrial values very rarely exceed ±5‰, and the most extreme isotopic signature yet detected elsewhere in the solar system are values of around +24‰ on the Moon. The only other known location in the solar system with large negative chlorine isotopes is the Atacama Desert, where perchlorate with -14‰ δ37Cl has been detected. The Atacama perchlorate has unusual Δ17O signatures associated with it, indicating a formation mechanism involving O3, which suggests an atmospheric origin of the perchlorate and associated large isotopic anomalies. Identification of non-zero positive Δ17O signatures in the O2 released during EGA runs would allow definitive evidence for a similar process having occurred on Mars. Perchlorate is thought to be the most likely source of HCl in EGA runs due to the simultaneous onset of O2 release. If perchlorate is indeed the HCl source, atmospheric chemistry could be responsible for the observed isotopic anomalies, with variable extents of perchlorate production producing the isotopic variability. However, chloride salts have also been observed to release HCl upon heating; if the timing of O2 release is merely coincidental, observed HCl could be coming from chlorides. At thermodynamic equilibrium, the fractionation factor of perchlorate reduction is 0.93, meaning that differing amounts of post-deposition reduction of isotopically normal perchlorate to chloride could account for the highly variable Cl isotopes. Additionally, post-deposition reduction could account for the difference between the two Cl isotopic groups if perchlorate

Identification of Methodology of Indirect Assessment of Economy Shadowing

Directory of Open Access Journals (Sweden)

Avhustyn Ruslan R.

2014-03-01

Full Text Available The article explains the essence of the shadow economy as an objective phenomenon of socio-economic relations and its influence upon national economy security through instruments of pricing, fiscal restrictions, tax control, and banking and insurance regulation. It proves the necessity of use of the indirect method of assessment of the level of economy shadowing along with methods of direct control over the growth of shadowed economic relations, since such an approach would allow rational approach to identification of volumes and level of shadow activity. In the result of the study the article marks out varieties of indirect assessment of economy shadowing (methods of document, accounting and economic analysis, their specific features, advantages and shortcomings and results of practical use. The article reveals approaches and indicators of economic analysis that allow identification of reasons of deviations from the normal economic activity of economic subjects. It provides examples of the indirect method of assessment of the volume of shadowed economy that deal with analysis of demand on money and comparison of rates of the growth of the money supply with the volume of sight drafts with GDP.

Isotopic identification and quantification of seawater influx into a groundwater body using environmental isotopes (2H,18O)

International Nuclear Information System (INIS)

Stichler, W.; Weise, S.M.; Trimborn, P.

2001-01-01

The development of optimal strategies for groundwater protection and for minimising the danger to groundwater through raw material excavation presupposes a well-founded hydrogeological knowledge of the complex interactions between flooded gravel pit and groundwater. The present study was dedicated to a quantitative determination of the groundwater throughput of a representative flooded gravel pit, the Alte Vogelbaggersee, on the basis of isotope experiments. Water samples were taken from groundwater analysis points upstream and downstream of the gravel pit and in the pit itself over a two-year observation period. In addition to isotope analysis ( 2 H, 1 8O) the scope of measurements included local parameters and chemical analysis in vertical profiles, time series and spatial distributions on selected days [de

Prediction, Detection, and Validation of Isotope Clusters in Mass Spectrometry Data

Directory of Open Access Journals (Sweden)

Hendrik Treutler

2016-10-01

Full Text Available Mass spectrometry is a key analytical platform for metabolomics. The precise quantification and identification of small molecules is a prerequisite for elucidating the metabolism and the detection, validation, and evaluation of isotope clusters in LC-MS data is important for this task. Here, we present an approach for the improved detection of isotope clusters using chemical prior knowledge and the validation of detected isotope clusters depending on the substance mass using database statistics. We find remarkable improvements regarding the number of detected isotope clusters and are able to predict the correct molecular formula in the top three ranks in 92 % of the cases. We make our methodology freely available as part of the Bioconductor packages xcms version 1.50.0 and CAMERA version 1.30.0.

The CSSIAR v.1.00 Software: A new tool based on SIAR to assess soil redistribution using Compound Specific Stable Isotopes

Directory of Open Access Journals (Sweden)

de los Santos-Villalobos Sergio

2017-01-01

Full Text Available Soil erosion is one of the biggest challenges for food production around the world. Many techniques have been used to evaluate and mitigate soil degradation. Nowadays isotopic techniques are becoming a powerful tool to assess soil apportionment. One of the innovative techniques used is the Compound Specific Stable Isotopes (CSSI analysis, which has been used to track down sediments and specify their sources by the isotopic signature of δ13C in specific fatty acids. The application of this technique on soil apportionment has been recently developed, however there is a lack of user-friendly Software for data processing and interpretation. The aim of this article is to introduce a new open source tool for working with data sets generated by the use of the CSSI technique to assess soil apportionment, called the CSSIARv1.00 Software

The CSSIAR v.1.00 Software: A new tool based on SIAR to assess soil redistribution using Compound Specific Stable Isotopes

Science.gov (United States)

Sergio, de los Santos-Villalobos; Claudio, Bravo-Linares; dos Anjos Roberto, Meigikos; Renan, Cardoso; Max, Gibbs; Andrew, Swales; Lionel, Mabit; Gerd, Dercon

Soil erosion is one of the biggest challenges for food production around the world. Many techniques have been used to evaluate and mitigate soil degradation. Nowadays isotopic techniques are becoming a powerful tool to assess soil apportionment. One of the innovative techniques used is the Compound Specific Stable Isotopes (CSSI) analysis, which has been used to track down sediments and specify their sources by the isotopic signature of δ13 C in specific fatty acids. The application of this technique on soil apportionment has been recently developed, however there is a lack of user-friendly Software for data processing and interpretation. The aim of this article is to introduce a new open source tool for working with data sets generated by the use of the CSSI technique to assess soil apportionment, called the CSSIARv1.00 Software

Assessment of Groundwater Quality in the Western Aquifers of Mauritius Using Isotope Techniques

Energy Technology Data Exchange (ETDEWEB)

Dindyal, D.; Brizmohun, R.; Fanny, J. O.Y. [National Environmental Laboratory, Reduit (Mauritius); Sacchi, E. [Dipartimento di Scienze della Terra e dell' Ambiente, Universita di Pavia (Italy)

2013-07-15

This contribution reports the results obtained in the IAEA TC project Mar/8/007, initiated in 2007. Fourteen boreholes were sampled during three sampling campaigns (rainy season, winter and summer): analyses include major ions, trace elements, stable isotopes ({delta}{sup 2}H, {delta}{sup 18}O and {delta}{sup 13}C) and a microbiological assessment (TC and E. coli). Results indicate that groundwater quality is generally good. Recharge mostly occurs in the central plateau area, but the increase in nitrates along the groundwater flow and the common presence of E. coli indicate that a minor recharge occurs all over the aquifer's extension. Infiltration is rapid and favoured by the presence of vertical fractures in the basalts. Discharge occurs at a lower altitude and is marked by a different stable isotope content and lower nitrates. In addition to validating the general groundwater circulation model, these results show that aquifers are not adequately protected against a possible input of pollutants from the surface. (author)

Homogeneous spectral spanning of terahertz semiconductor lasers with radio frequency modulation.

Science.gov (United States)

Wan, W J; Li, H; Zhou, T; Cao, J C

2017-03-08

Homogeneous broadband and electrically pumped semiconductor radiation sources emitting in the terahertz regime are highly desirable for various applications, including spectroscopy, chemical sensing, and gas identification. In the frequency range between 1 and 5 THz, unipolar quantum cascade lasers employing electron inter-subband transitions in multiple-quantum-well structures are the most powerful semiconductor light sources. However, these devices are normally characterized by either a narrow emission spectrum due to the narrow gain bandwidth of the inter-subband optical transitions or an inhomogeneous broad terahertz spectrum from lasers with heterogeneous stacks of active regions. Here, we report the demonstration of homogeneous spectral spanning of long-cavity terahertz semiconductor quantum cascade lasers based on a bound-to-continuum and resonant phonon design under radio frequency modulation. At a single drive current, the terahertz spectrum under radio frequency modulation continuously spans 330 GHz (~8% of the central frequency), which is the record for single plasmon waveguide terahertz lasers with a bound-to-continuum design. The homogeneous broadband terahertz sources can be used for spectroscopic applications, i.e., GaAs etalon transmission measurement and ammonia gas identification.

Isotopic diagnosis and molecular identification of cucumber mosaic virus and satellite RNA infecting tomato in Shanghai

International Nuclear Information System (INIS)

Zhang Huarong; Du Zhiyou; Liao Qiansheng; Zhang Hen

2006-01-01

In summer of 2004 and 2005, typical viral disease symptoms were found on field tomato from Shanghai, which remarkably reduced the yield of tomato. Total RNA of tomato leaves and purified virions were detected by hybridization with 32 P probes conducted with partial sequence of CMV RNA3 and full cDNA of CMV satRNA. Viruses were also confirmed by analyzing dsRNA extracted from tomato leaves. Full sequence of CMV RNA3 was gained by RT-PCR and the result of sequencing indicated that genomic RNA3 belongs to subgroup II. Two 15nt complementary ssDNA as amplification primers. Phylogenetic analysis showed that the identity of this 383nt satellite and some documented satRNAs was 72.6 to 99.5% at the nucleotide level. Several mutation sites were found at the 3' terminus of the newly discovered satRNA. By Isotopic diagnosis and molecular Identification, variation of CMV and its satRNA were found in Tomato from Shanghai, Which may influence the viral disease prevalence and the emergence of new symptom. (authors)

Parasites in Myodes glareolus and their association with diet assessed by stable isotope analysis

DEFF Research Database (Denmark)

Lynggaard, Christina; Woolsey, Ian David; Al-Sabi, Mohammad Nafi Solaiman

2018-01-01

Vertebrates are hosts to numerous parasites, belonging to many different taxa. These parasites differ in transmission, being through either direct contact, a faecal-oral route, ingestion of particular food items, vertical or sexual transmission, or by a vector. Assessing the impact of diet...... on parasitism can be difficult because analysis of faecal and stomach content are uncertain and labourious; and as with molecular methods, do not provide diet information over a longer period of time. We here explored whether the analysis of stable isotopes in hair provides insight into the impact of diet...... and the presence of parasites in the rodent Myodes glareolus. Twenty-one animals were examined for parasites and their hair analysed for stable isotopes (C and N). A positive correlation between δ15N and one species of intestinal parasite was observed in females. Furthermore, several ectoparasites were negatively...

Introduction to solar radio astronomy and radio physics

International Nuclear Information System (INIS)

Krueger, A.

1979-01-01

A systematic summary is presented of the work done during the last thirty years in the field of solar radio astronomy from the standpoint of general solar physics. Instrumental aspects, observations and theory are covered. A brief introduction is given to the matter consisting of the history of solar radio astronomy and some fundamentals of astronomy and solar physics are outlined. Some topics of the instrumental background of solar radio astronomy and the main results of observations are presented. The elements of a theoretical interpretation of solar radio observations are reported and a synthesis of both observation and theory contributing to a general picture of solar and solar-terrestrial physics is outlined. (C.F./Auth)

Strontium isotope stratigraphy of the Pelotas Basin

Energy Technology Data Exchange (ETDEWEB)

Zerfass, Geise de Santana dos Anjos, E-mail: geise.zerfass@petrobras.com.br [Petroleo Brasileiro S.A. (PETROBRAS/CENPES/PDGEO/BPA), Rio de Janeiro, RJ (Brazil). Centro de Pesquisas e Desenvolvimento Leopoldo Americo Miguez de Mello; Chemale Junior, Farid, E-mail: fchemale@unb.br [Universidade de Brasilia (UnB), DF (Brazil). Instituto de Geociencias; Moura, Candido Augusto Veloso, E-mail: candido@ufpa.br [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Centro de Geociencias. Dept. de Geoquimica e Petrologia; Costa, Karen Badaraco, E-mail: karen.costa@usp.br [Instituto Oceanografico, Sao Paulo, SP (Brazil); Kawashita, Koji, E-mail: koji@usp.br [Unversidade de Sao Paulo (USP), SP (Brazil). Centro de Pesquisas Geocronologicas

2014-07-01

Strontium isotope data were obtained from foraminifera shells of the Pelotas Basin Tertiary deposits to facilitate the refinement of the chronostratigraphic framework of this section. This represents the first approach to the acquisition of numerical ages for these strata. Strontium isotope stratigraphy allowed the identification of eight depositional hiatuses in the Eocene-Pliocene section, here classified as disconformities and a condensed section. The reconnaissance of depositional gaps based on confident age assignments represents an important advance considering the remarkably low chronostratigraphic resolution in the Cenozoic section of the Pelotas Basin. The recognition of hiatuses that match hiatuses is based on biostratigraphic data, as well as on global events. Furthermore, a substantial increase in the sedimentation rate of the upper Miocene section was identified. Paleotemperature and productivity trends were identified based on oxygen and carbon isotope data from the Oligocene-Miocene section, which are coherent with worldwide events, indicating the environmental conditions during sedimentation. (author)

Direct stable isotope porewater equilibration and identification of groundwater processes in heterogeneous sedimentary rock

Energy Technology Data Exchange (ETDEWEB)

David, Katarina, E-mail: k.david@student.unsw.edu.au [School of Mining Engineering, UNSW Australia, NSW 2052 (Australia); Connected Waters Initiative Research Centre, UNSW Australia, NSW 2052 (Australia); Timms, Wendy [School of Mining Engineering, UNSW Australia, NSW 2052 (Australia); Connected Waters Initiative Research Centre, UNSW Australia, NSW 2052 (Australia); Baker, Andy [Connected Waters Initiative Research Centre, UNSW Australia, NSW 2052 (Australia)

2015-12-15

The off-axis integrated cavity output spectrometry (ICOS) method to analyse porewater isotopic composition has been successfully applied over the last decade in groundwater studies. This paper applies the off-axis ICOS method to analyse the porewater isotopic composition, attempts to use the isotopic shift in groundwater values along with simple geochemical mixing model to define the groundwater processes in the Sydney Basin, Australia. Complementary data included geophysical, hydrogeological, geochemical, and mineralogical investigations. Porewater from core samples were analysed for δ{sup 18}O and δ{sup 2}H from various sedimentary units in the Basin and compared to endpoint water members. Stable δ{sup 18}O and δ{sup 2}H values of porewaters in the Basin (− 9.5 to 2.8‰ for δ{sup 18}O and − 41.9 to 7.9‰ for δ{sup 2}H) covered a relatively narrow range in values. The variability in water isotopes reflects the variability of the input signal, which is the synoptic variability in isotopic composition of rainfall, and to a minor extent the subsequent evaporation. The porosity, bulk density and mineralogy data demonstrate the heterogeneity that adds the complexity to variations in the isotope profile with depth. The source of chloride in the sedimentary sequence was related to rock–water and cement/matrix–water interaction rather than to evaporation. The heterogeneous character of the sedimentary rock strata was supported by a change in pore pressures between units, density and variability in rock geochemical analyses obtained by using X-ray fluorescence (XRF) and X-ray power diffraction analyses. This research identified distinct hydrogeological zones in the Basin that were not previously defined by classic hydrogeological investigations. Isotopic signature of porewaters along the detailed vertical profile in combination with mineralogical, geochemical, geophysical and hydrogeological methods can provide useful information on groundwater movement in

Impact of cognitive radio on radio astronomy

NARCIS (Netherlands)

Bentum, Marinus Jan; Boonstra, A.J.; Baan, W.A.

2010-01-01

The introduction of new communication techniques requires an increase in the efficiency of spectrum usage. Cognitive radio is one of the new techniques that fosters spectrum efficiency by using unoccupied frequency spectrum for communications. However, cognitive radio will increase the transmission

Memories of Professor Sugimoto and isotope separator

International Nuclear Information System (INIS)

Tanaka, Kazuhiro

2013-01-01

Usual magnetic isotope-separators select the particles with the same Z/A value which may include different nuclides. Identification of the isotope with the same Z/A value but different Z or A value is an universal requirement for nuclear physics experiments. If one knows, together with the A/Z value, the dE/dx or the range of the isotope in some energy absorber, which are the function of Z 2 /A, its nuclide can be specified. This idea can be realized by arranging proper energy-absorber at the focal point of magnetic analyzer. The author proposes another novel method in which two dipole-magnets are excited with some difference, and an energy absorber corresponding to that energy difference is situated between two magnets. It can also be devised so that the dispersion at the final focal-point depends only on the emission angle of the isotope at production. Professor Sugimoto recognized the significance of this scheme and proposed to employ it in the experiment at BEVATRON. The unbalanced two dipole-magnets method is employed at RIKEN and RCNP, Osaka University. The author's creative idea originated in Sugimoto Laboratory at Osaka University. (author)

La radio en África. Una radio para el desarrollo

Directory of Open Access Journals (Sweden)

Jean-Paul Lafrance

2015-01-01

Full Text Available La radio de tipo comunitario, tal como la conocemos en Norteamérica y Europa (no-comercial, no-estatal y particípatíva, no existe en Africa. Sin embargo, la situación histórica y el contexto socio-político particulares de Africa han precedido la instauración de una radio que, dentro del marco del presente estudio, nos ha resultado interesante. Se trata de la radio educativa rural. Aunque enmarcada dentro del molde estatal de regímenes que en su mayoría son dictaduras, la radio rural africana, al igual que las radios de tipo comunitario, utiliza la radio con otros fines además de los convencionales. En este caso, la radio es un instrumento al servicio del desarrollo, por no decir al servicio del campesino, en una relación con éste último que probablemente dejará cada vez más de ser uni-direccional. La experiencia africana nos proporcionará en esta perspectiva nuevos elementos de reflexión en lo que respecta al rol de la radio dentro de la comunidad y sobre las condiciones incluso del éxito o no-éxito de la participación popular.

Giant Metrewave Radio Telescope Observations of Head–Tail Radio Galaxies

Energy Technology Data Exchange (ETDEWEB)

Sebastian, Biny; Lal, Dharam V.; Rao, A. Pramesh, E-mail: biny@ncra.tifr.res.in [National Center for Radio Astrophysics—Tata Institute of Fundamental Research Post Box 3, Ganeshkhind P.O., Pune 41007 (India)

2017-10-01

We present results from a study of seven large known head–tail radio galaxies based on observations using the Giant Metrewave Radio Telescope at 240 and 610 MHz. These observations are used to study the radio morphologies and distribution of the spectral indices across the sources. The overall morphology of the radio tails of these sources is suggestive of random motions of the optical host around the cluster potential. The presence of multiple bends and wiggles in several head–tail sources is possibly due to the precessing radio jets. We find steepening of the spectral index along the radio tails. The prevailing equipartition magnetic field also decreases along the radio tails of these sources. These steepening trends are attributed to the synchrotron aging of plasma toward the ends of the tails. The dynamical ages of these sample sources have been estimated to be ∼10{sup 8} yr, which is a factor of six more than the age estimates from the radiative losses due to synchrotron cooling.

A Radio Astronomy Science Education Partnership - GAVRT and Radio JOVE

Science.gov (United States)

Higgins, C. A.; Thieman, J. R.; Bunnell, K.; Soholt, G.

2009-12-01

The planet Jupiter provides an excellent subject to educate, engage, and inspire students and teachers to learn science. The Goldstone Apple-Valley Radio Telescope (GAVRT) program (http://www.lewiscenter.org/gavrt) and The Radio JOVE project (http://radiojove.gsfc.nasa.gov) each have a long history of allowing students and teachers to interact with scientists and real radio telescopes. The upcoming Juno mission to Jupiter (2011 launch) allows both GAVRT and Radio JOVE to combine efforts and engage with the NASA Juno mission, thus increasing the excitement and learning potential for teachers, students, and the general public. Teachers can attend workshops for training to operate a 34-meter radio telescope and/or build their own simple radio telescope, both of which can be used directly in the classroom. We will overview some classroom activities and highlight some teacher-student experiences. In addition, we will update our efforts on greater Web-based control of the radio telescopes, as well as highlight our upcoming workshops to allow better access for teachers in different parts of the Country.

Potential game theory applications in radio resource allocation

CERN Document Server

Lã, Quang Duy; Soong, Boon-Hee

2016-01-01

This book offers a thorough examination of potential game theory and its applications in radio resource management for wireless communications systems and networking. The book addresses two major research goals: how to identify a given game as a potential game, and how to design the utility functions and the potential functions with certain special properties in order to formulate a potential game. After proposing a unifying mathematical framework for the identification of potential games, the text surveys existing applications of this technique within wireless communications and networking problems found in OFDMA 3G/4G/WiFi networks, as well as next-generation systems such as cognitive radios and dynamic spectrum access networks. Professionals interested in understanding the theoretical aspect of this specialized field will find Potential Game Theory a valuable resource, as will advanced-level engineering students. It paves the way for extensive and rigorous research exploration on a topic whose capacity for...

Recent Developments in Trace, Ultratrace and Isotope Ratio Measurements in Inductively Coupled Plasma Mass Spectrometry

International Nuclear Information System (INIS)

Zahran, N. F.

2004-01-01

Inductively coupled plasma mass spectrometry (ICP-MS) and Laser Ablation (LA-ICP-MS) are recent techniques for trace, ultratrace and isotope ratio measurements. Main features of these techniques and their figure of merit and capabilities are discussed. An overview of ICP-MS instrument is presented in addition to its precision, accuracy and detection limits. Uses of ICP-MS in environmental monitoring in some cases for detection of some radio nuclides are presented. Two geological applications namely, zircon grains analysis and age dating of Rb-Sr method are presented. Zn elemental and isotopic analyses in blood and serum as a biological application is shown. (Author)

Purdue Rare Isotope Measurement Laboratory

Science.gov (United States)

Caffee, M.; Elmore, D.; Granger, D.; Muzikar, P.

2002-12-01

The Purdue Rare Isotope Measurement Laboratory (PRIME Lab) is a dedicated research and service facility for accelerator mass spectrometry. AMS is an ultra-sensitive analytical technique used to measure low levels of long-lived cosmic-ray-produced and anthropogenic radionuclides, and rare trace elements. We measure 10Be (T1/2 = 1.5 My), 26Al (.702 My), 36Cl (.301 My), and 129I (16 My), in geologic samples. Applications include dating the cosmic-ray-exposure time of rocks on Earth's surface, determining rock and sediment burial ages, measuring the erosion rates of rocks and soils, and tracing and dating ground water. We perform sample preparation and separation chemistries for these radio-nuclides for our internal research activities and for those external researchers not possessing this capability. Our chemical preparation laboratories also serve as training sites for members of the geoscience community developing these techniques at their institutions. Research at Purdue involves collaborators among members of the Purdue Departments of Physics, Earth and Atmospheric Sciences, Chemistry, Agronomy, and Anthropology. We also collaborate and serve numerous scientists from other institutions. We are currently in the process of modernizing the facility with the goals of higher precision for routinely measured radio-nuclides, increased sample throughput, and the development of new measurement capabilities for the geoscience community.

Evaluation of online carbon isotope dilution mass spectrometry for the purity assessment of synthetic peptide standards

Energy Technology Data Exchange (ETDEWEB)

Díaz, Sergio Cueto; Ruiz Encinar, Jorge, E-mail: ruizjorge@uniovi.es; García Alonso, J. Ignacio, E-mail: jiga@uniovi.es

2014-09-24

Highlights: • Purity assessment of peptide standards applicable to any water soluble peptide. • Online {sup 13}C isotope dilution mass spectrometry. • Mass flow chromatogram from measured 44/45 isotope ratios. • Validation by the analysis of NIST 8327. - Abstract: We present a novel method for the purity assessment of peptide standards which is applicable to any water soluble peptide. The method is based on the online {sup 13}C isotope dilution approach in which the peptide is separated from its related impurities by liquid chromatography (LC) and the eluent is mixed post-column with a continuous flow of {sup 13}C-enriched sodium bicarbonate. An online oxidation step using sodium persulfate in acidic media at 99 °C provides quantitative oxidation to {sup 12}CO{sub 2} and {sup 13}CO{sub 2} respectively which is extracted to a gaseous phase with the help of a gas permeable membrane. The measurement of the isotope ratio 44/45 in the mass spectrometer allows the construction of the mass flow chromatogram. As the only species that is finally measured in the mass spectrometer is CO{sub 2}, the peptide content in the standard can be quantified, on the base of its carbon content, using a generic primary standard such as potassium hydrogen phthalate. The approach was validated by the analysis of a reference material (NIST 8327), and applied to the quantification of two commercial synthetic peptide standards. In that case, the results obtained were compared with those obtained using alternative methods, such as amino acid analysis and ICP-MS. The results obtained proved the value of the method for the fast, accurate and precise mass purity assignment of synthetic peptide standards.

Assessment of mercury exposure among small-scale gold miners using mercury stable isotopes

International Nuclear Information System (INIS)

Sherman, Laura S.; Blum, Joel D.; Basu, Niladri; Rajaee, Mozhgon; Evers, David C.; Buck, David G.; Petrlik, Jindrich; DiGangi, Joseph

2015-01-01

Total mercury (Hg) concentrations in hair and urine are often used as biomarkers of exposure to fish-derived methylmercury (MeHg) and gaseous elemental Hg, respectively. We used Hg stable isotopes to assess the validity of these biomarkers among small-scale gold mining populations in Ghana and Indonesia. Urine from Ghanaian miners displayed similar Δ 199 Hg values to Hg derived from ore deposits (mean urine Δ 199 Hg=0.01‰, n=6). This suggests that urine total Hg concentrations accurately reflect exposure to inorganic Hg among this population. Hair samples from Ghanaian miners displayed low positive Δ 199 Hg values (0.23–0.55‰, n=6) and low percentages of total Hg as MeHg (7.6–29%, n=7). These data suggest that the majority of the Hg in these miners' hair samples is exogenously adsorbed inorganic Hg and not fish-derived MeHg. Hair samples from Indonesian gold miners who eat fish daily displayed a wider range of positive Δ 199 Hg values (0.21–1.32‰, n=5) and percentages of total Hg as MeHg (32–72%, n=4). This suggests that total Hg in the hair samples from Indonesian gold miners is likely a mixture of ingested fish MeHg and exogenously adsorbed inorganic Hg. Based on data from both populations, we suggest that total Hg concentrations in hair samples from small-scale gold miners likely overestimate exposure to MeHg from fish consumption. - Highlights: • Mercury isotopes were measured in hair and urine from small-scale gold miners. • Mercury isotopes indicate that Hg in urine comes from mining activity. • Mercury isotopes suggest Hg in hair is a mixture of fish MeHg and inorganic Hg. • A large percentage of Hg in miner’s hair is released during amalgam burning and adsorbed

Isotopic hydrology, nuclear tool for sustainable management of water resources

International Nuclear Information System (INIS)

Peralta Vita, Jose Luis; Gil Castillo, Reinaldo; Dapenna Dapenna, Cristina

2015-01-01

Management and protection of the ground water requires a planned use of the aquifer, considering the social and economic factors of the environment without causing damages in quality and quantity. The karstic aquifer of the sub-basin Artemisa-Quivican, which supports food production for Artemisa and Havana counties, has been characterised through the nuclear techniques application (isotopic hydrology). Three investigation stages were developed: the design and definition of the optimized network for the isotopic and physicochemical monitoring of ground and surface waters; the isotopic characterization (tritium, dissolved oxygen, deuterium) and physicochemical characterization (chemical macro-components, physical and quality parameters) of the sub-basin water and of registered precipitations in the region; and finally the identification of the possible contamination sources in the sub-basin

Use of Isotopic Techniques for the Assessment of Hydrological Interaction Surface Water and Groundwater. Rio Man - Cienaga Colombia

International Nuclear Information System (INIS)

Palacio B, P.; Betancur V, T.; Dapena, C.

2011-01-01

This job integrates the first results from the studies ''Conceptual Hydrological Model for the middle and lower parts of the Man River basin using hydrological, hydrochemical and isotopic techniques'' (Palacio, 2011) and ''Hydrochemical and Isotopic techniques for the assessment of hydrological processes in the the wetlands of Bajo Cauca Antioquia'' (University of Antioquia and International Atomic Energy Agency (IAEA). The Man river basin covers an area of 688 km 2 ; with temperatures ranging from 25 to 30 o C; The average annual rainfall is 2.800 mm. The geology of the area is composed mainly of clastic sedimentary rocks of continental origin. A hydrological model of interaction between surface water and groundwater for the lower middle of the Man River basin was obtained by the use of hydrological analysis techniques. This model was refined, adjusted and validated using isotope techniques based mainly on the analysis of spatial and temporal variance of stable isotopes found in rain water, surface bodies of water such as streams and wetlands, and in an unconfined aquifer.

Amateur Planetary Radio Data Archived for Science and Education: Radio Jove

Science.gov (United States)

Thieman, J.; Cecconi, B.; Sky, J.; Garcia, L. N.; King, T. A.; Higgins, C. A.; Fung, S. F.

2015-12-01

The Radio Jove Project is a hands-on educational activity in which students, teachers, and the general public build simple radio telescopes, usually from a kit, to observe single frequency decameter wavelength radio emissions from Jupiter, the Sun, the galaxy, and the Earth usually with simple dipole antennas. Some of the amateur observers have upgraded their receivers to spectrographs and their antennas have become more sophisticated as well. The data records compare favorably to more sophisticated professional radio telescopes such as the Long Wavelength Array (LWA) and the Nancay Decametric Array. Since these data are often carefully calibrated and recorded around the clock in widely scattered locations they represent a valuable database useful not only to amateur radio astronomers but to the professional science community as well. Some interesting phenomena have been noted in the data that are of interest to the professionals familiar with such records. The continuous monitoring of radio emissions from Jupiter could serve as useful "ground truth" data during the coming Juno mission's radio observations of Jupiter. Radio Jove has long maintained an archive for thousands of Radio Jove observations, but the database was intended for use by the Radio Jove participants only. Now, increased scientific interest in the use of these data has resulted in several proposals to translate the data into a science community data format standard and store the data in professional archives. Progress is being made in translating Radio Jove data to the Common Data Format (CDF) and also in generating new observations in that format as well. Metadata describing the Radio Jove data would follow the Space Physics Archive Search and Extract (SPASE) standard. The proposed archive to be used for long term preservation would be the Planetary Data System (PDS). Data sharing would be achieved through the PDS and the Paris Astronomical Data Centre (PADC) and the Virtual Wave Observatory (VWO

La radio digital

Directory of Open Access Journals (Sweden)

Carlos Eduardo Cortés S.

2015-01-01

Full Text Available La radio digital es un producto de la llamada convergencia digital. Las nuevas tecnologías interconectadas permiten la aparición de nuevos modos de audiencia y la implementación de herramientas versátiles. Habla del problema de los estándares, de la radio satelital, la radio digital terrestre, las radios internacionales, la interactividad.

The Global Network of Isotopes in Precipitation after 55 years: assessing past, present and future developments

Science.gov (United States)

Terzer, Stefan; Araguas-Araguas, Luis; Wassenaar, Leonard I.; Aggarwal, Pradeep K.

2015-04-01

regionalized cluster-based water isotope prediction model (RCWIP) which uses fuzzy clustering to delineate regions of climatic similarity, and to determine regionalized regression models for each climatic cluster in order to lower prediction uncertainty of isotope values. Here, we present new data and figures on the spatial and temporal evolution of the GNIP network, including station spatial density and coverage analysis. Moreover, we assess outstanding deficits in the spatial coverage of the GNIP network by applying the clustering structure of the RCWIP approach to identify those regions which would benefit most from an improved GNIP sampling. Finally, we present an updated global meteoric water (GMWL) line based on different calculation methods (ordinary least squares method, weighted least squares, or based on weighted means).

Applications of stable isotope tracers to air pollution problems

International Nuclear Information System (INIS)

Kelly, W.R.

1985-01-01

One of the fundamental environmental problems facing the United States is how to effect acid rain abatement in the northeast United States and southeastern Canada in a cost effective manner. There are several key scientific questions that must be addressed in order to design an effective strategy. These questions include the following: (1) where do pollutants from a specified source area go., (2) what chemical transformations occur during transport., and (3) where and how are these pollutants deposited. One approach to address these questions is the use of enriched stable isotopes as intentional tracers of aerosol and sulfur emissions. Isotopic tracers can determine the location and pathways of pollutants in the environment and trace pollutants back to their original source. For an element with n isotopes, it is possible to intentionally tag n-2 sources. (For example, Nd, which has seven isotopes, could be used to tag 5 different aerosol sources). To trace sulfur compounds, the two minor isotopes of sulfur, 33 S and 36 S, could be used. Methods developed at NBS using high precision mass spectrometry permits the detection of the small changes in isotopic composition brought about by the intentional tagging at a source. This may make possible the identification of a source at a particular sampling site

Spectrum management and radio resource management considering cognitive radio systems

NARCIS (Netherlands)

Haartsen, J.C.; Wieweg, Lasse; Huschke, Jörg

2005-01-01

International fora and some national administrations define a cognitive radio (CR) as a pioneering radio communication system that would be capable of altering and adapting its transmitter and receiver parameters based on communication and the exchange of information with related detectable radio

Application of Zn isotopes in environmental impact assessment of Zn–Pb metallurgical industries: A mini review

International Nuclear Information System (INIS)

Yin, Nang-Htay; Sivry, Yann; Benedetti, Marc F.; Lens, Piet N.L.; Hullebusch, Eric D. van

2016-01-01

Zn and Pb smelters are the major contributors to Zn and Pb emissions among all anthropogenic sources, thus, it is essential to understand Zn isotopic variations within the context of metallurgical industries, as well as its fractionation in different environments impacted by smelting activities. This mini review outlines the current state of knowledge on Zn isotopic fractionation during the high-temperature roasting process in Zn and Pb refineries; δ"6"6Zn values variations in air emissions, slags and effluents from the smelters in comparison to the geogenic Zn isotopic signature of ores formation and weathering. In order to assess the environmental impact of these smelters, the available and measured δ"6"6Zn values are compiled for smelter impacted natural water bodies (groundwater, stream and river water), sediments (lake and reservoir) and soils (peat bog soil, inland soil). Finally, the discussion is extended to the fractionation induced during numerous physicochemical reactions and transformations, i.e. adsorption, precipitation as well as both inorganic and organic surface complexation. - Highlights: • Zn and Pb smelters are the major contributors to Zn emissions among all anthropogenic sources. • Zn isotopic variations in this context has been widely studied over the last 15 years. • Zn isotopic fractionation during the high-temperature roasting process and electroplating process is summarize. • Subsequent δ"6"6Zn values variations in air emissions, slags and effluents from the smelters are compared to the geogenic one. • The usefulness of δ"6"6Zn values to trace environmental impact of these smelters is discussed.

Blinded comparison of faecal loading on plain radiography versus radio-opaque marker transit studies in the assessment of constipation

Energy Technology Data Exchange (ETDEWEB)

Cowlam, S. [Sunderland Royal Hospital, Sunderland (United Kingdom); Vinayagam, R.; Khan, U.; Marsden, S.; Minty, I.; Moncur, P.; Bain, I. [University Hospital of North Durham, Durham (United Kingdom); Yiannakou, Y.J. [University Hospital of North Durham, Durham (United Kingdom)], E-mail: yan.yiannakou@cddft.nhs.uk

2008-12-15

Aim: To compare faecal loading on plain radiography versus radio-opaque marker transit studies in the assessment of constipation. Methods: The study group was a convenience sample of patients attending the Durham Constipation Clinic. All patients underwent transit studies according to an established protocol, and severity of constipation was assessed contemporaneously using a validated questionnaire (PAC-SYM). Transit studies were performed using radio-opaque markers that were ingested over 3 consecutive days, with a radiograph taken on the fourth day. Digital images of the radiograph were digitally altered to remove all traces of the transit markers without affecting the underlying pattern of faecal loading. Four observers assessed faecal loading independently; two clinicians (C1 and C2) and two radiologists (R1 and R2). C1 and R1 used a previously described formal scoring method of assessing faecal loading, whereas C2 and R2 assessed the images as if they were in a clinic or reporting session, grading the faecal loading as mild, moderate, or severe. Results: One hundred patients were recruited out of 186 presenting in a 2-year period. All patients completed assessments. The correlation between observers was only fair to moderate (r ranging from 0.34-0.51). There were some surprisingly marked disagreements in 10-18% of assessments. The correlation between faecal loading and transit was weak for all observers (r ranging from 0.261-0.311). Symptom severity did not correlate with faecal loading. Conclusion: These results suggest that there is considerable inter-observer variation in the radiological assessment of faecal loading, irrespective of the training or method used by the observer, and that there is very poor correlation with colonic transit. The diagnosis of constipation, and the assessment of severity, is best performed clinically.

Blinded comparison of faecal loading on plain radiography versus radio-opaque marker transit studies in the assessment of constipation

International Nuclear Information System (INIS)

Cowlam, S.; Vinayagam, R.; Khan, U.; Marsden, S.; Minty, I.; Moncur, P.; Bain, I.; Yiannakou, Y.J.

2008-01-01

Aim: To compare faecal loading on plain radiography versus radio-opaque marker transit studies in the assessment of constipation. Methods: The study group was a convenience sample of patients attending the Durham Constipation Clinic. All patients underwent transit studies according to an established protocol, and severity of constipation was assessed contemporaneously using a validated questionnaire (PAC-SYM). Transit studies were performed using radio-opaque markers that were ingested over 3 consecutive days, with a radiograph taken on the fourth day. Digital images of the radiograph were digitally altered to remove all traces of the transit markers without affecting the underlying pattern of faecal loading. Four observers assessed faecal loading independently; two clinicians (C1 and C2) and two radiologists (R1 and R2). C1 and R1 used a previously described formal scoring method of assessing faecal loading, whereas C2 and R2 assessed the images as if they were in a clinic or reporting session, grading the faecal loading as mild, moderate, or severe. Results: One hundred patients were recruited out of 186 presenting in a 2-year period. All patients completed assessments. The correlation between observers was only fair to moderate (r ranging from 0.34-0.51). There were some surprisingly marked disagreements in 10-18% of assessments. The correlation between faecal loading and transit was weak for all observers (r ranging from 0.261-0.311). Symptom severity did not correlate with faecal loading. Conclusion: These results suggest that there is considerable inter-observer variation in the radiological assessment of faecal loading, irrespective of the training or method used by the observer, and that there is very poor correlation with colonic transit. The diagnosis of constipation, and the assessment of severity, is best performed clinically

Pb isotopes as tracers of mining-related Pb in lichens, seaweed and mussels near a former Pb-Zn mine in West Greenland

Energy Technology Data Exchange (ETDEWEB)

Sondergaard, Jens, E-mail: jens@dmu.d [Department of Arctic Environment, National Environmental Research Institute, Aarhus University, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Asmund, Gert; Johansen, Poul [Department of Arctic Environment, National Environmental Research Institute, Aarhus University, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Elberling, Bo [Institute of Geography and Geology, University of Copenhagen, Oster Voldgade 10, DK-1350 Copenhagen K (Denmark); University Centre in Svalbard, NO-9171 Longyearbyen (Norway)

2010-05-15

Identification of mining-related contaminants is important in order to assess the spreading of contaminants from mining as well as for site remediation purposes. This study focuses on lead (Pb) contamination in biota near the abandoned 'Black Angel Mine' in West Greenland in the period 1988-2008. Stable Pb isotope ratios and total Pb concentrations were determined in lichens, seaweed and mussels as well as in marine sediments. The results show that natural background Pb ({sup 207}Pb/{sup 206}Pb: 0.704-0.767) and Pb originating from the mine ore ({sup 207}Pb/{sup 206}Pb: 0.955) have distinct isotopic fingerprints. Total Pb in lichens, seaweed, and mussels was measured at values up to 633, 19 and 1536 mg kg{sup -1} dry weight, respectively, and is shown to be a mixture of natural Pb and ore-Pb. This enables quantification of mining-related Pb and shows that application of Pb isotope data is a valuable tool for monitoring mining pollution. - Lead isotopes can be used to monitor uptake of mining-related lead in lichens, seaweed and mussels.

The use of carbon stable isotope ratios in drugs characterization

Energy Technology Data Exchange (ETDEWEB)

Magdas, D. A., E-mail: gabriela.cristea@itim-cj.ro; Cristea, G., E-mail: gabriela.cristea@itim-cj.ro; Bot, A., E-mail: gabriela.cristea@itim-cj.ro; Mirel, V., E-mail: gabriela.cristea@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath Str., 400293 Cluj-Napoca (Romania)

2013-11-13

Isotopic Ratio Mass Spectrometry (IRMS) is an effective toll to be used for drug product authentication. The isotopic composition could be used to assist in the differentiation between batches of drugs and assist in the identification of counterfeit materials on the market. Only two factors affect the isotopic ratios in pharmaceutical components: the isotopic composition of the raw materials and the synthetic processes performed upon them. Counterfeiting of pharmaceutical drugs threatens consumer confidence in drug products companies' economical well-being. In this preliminary study, the analyzed samples consist in two types of commercially available analgesics, which were purchases from Romanian pharmacies. Differences in δ{sup 13}C between batches from −29.7 to −31.6% were observed, demonstrating that this method can be used to differentiate among individual drug batches and subsequently identify counterfeits on the market. On the other hand, carbon isotopic ratios differences among producers were recorded, the variations being between −31.3 to −34.9% for the same type of analgesic, but from different manufactures.

DISCOVERY OF RADIO AFTERGLOW FROM THE MOST DISTANT COSMIC EXPLOSION

International Nuclear Information System (INIS)

Chandra, Poonam; Frail, Dale A.; Fox, Derek; Kulkarni, Shrinivas; Harrsion, Fiona; Kasliwal, Mansi; Berger, Edo; Cenko, S. Bradley; Bock, Douglas C.-J.

2010-01-01

We report on the discovery of radio afterglow emission from the gamma-ray burst GRB 090423, which exploded at a redshift of 8.3, making it the object with the highest known redshift in the universe. By combining our radio measurements with existing X-ray and infrared observations, we estimate the kinetic energy of the afterglow, the geometry of the outflow, and the density of the circumburst medium. Our best-fit model suggests a quasi-spherical, high-energy explosion in a low, constant-density medium. GRB 090423 had a similar energy release to the other well-studied high redshift GRB 050904 (z = 6.26), but their circumburst densities differ by 2 orders of magnitude. We compare the properties of GRB 090423 with a sample of gamma-ray bursts (GRBs) at moderate redshifts. We find that the high energy and afterglow properties of GRB 090423 are not sufficiently different from other GRBs to suggest a different kind of progenitor, such as a Population III (Pop III) star. However, we argue that it is not clear that the afterglow properties alone can provide convincing identification of Pop III progenitors. We suggest that the millimeter and centimeter radio detections of GRB 090423 at early times contained emission from the reverse shock. If true, this may have important implications for the detection of high-redshift GRBs by the next generation of radio facilities.

Implementation options for DNA-based identification into ecological status assessment under the European Water Framework Directive.

Science.gov (United States)

Hering, Daniel; Borja, Angel; Jones, J Iwan; Pont, Didier; Boets, Pieter; Bouchez, Agnes; Bruce, Kat; Drakare, Stina; Hänfling, Bernd; Kahlert, Maria; Leese, Florian; Meissner, Kristian; Mergen, Patricia; Reyjol, Yorick; Segurado, Pedro; Vogler, Alfried; Kelly, Martyn

2018-07-01

Assessment of ecological status for the European Water Framework Directive (WFD) is based on "Biological Quality Elements" (BQEs), namely phytoplankton, benthic flora, benthic invertebrates and fish. Morphological identification of these organisms is a time-consuming and expensive procedure. Here, we assess the options for complementing and, perhaps, replacing morphological identification with procedures using eDNA, metabarcoding or similar approaches. We rate the applicability of DNA-based identification for the individual BQEs and water categories (rivers, lakes, transitional and coastal waters) against eleven criteria, summarised under the headlines representativeness (for example suitability of current sampling methods for DNA-based identification, errors from DNA-based species detection), sensitivity (for example capability to detect sensitive taxa, unassigned reads), precision of DNA-based identification (knowledge about uncertainty), comparability with conventional approaches (for example sensitivity of metrics to differences in DNA-based identification), cost effectiveness and environmental impact. Overall, suitability of DNA-based identification is particularly high for fish, as eDNA is a well-suited sampling approach which can replace expensive and potentially harmful methods such as gill-netting, trawling or electrofishing. Furthermore, there are attempts to replace absolute by relative abundance in metric calculations. For invertebrates and phytobenthos, the main challenges include the modification of indices and completing barcode libraries. For phytoplankton, the barcode libraries are even more problematic, due to the high taxonomic diversity in plankton samples. If current assessment concepts are kept, DNA-based identification is least appropriate for macrophytes (rivers, lakes) and angiosperms/macroalgae (transitional and coastal waters), which are surveyed rather than sampled. We discuss general implications of implementing DNA-based identification

Lead isotope identification of sources of galena from some prehistoric Indian sites in Ontario, Canada

International Nuclear Information System (INIS)

Farquhar, R.M.; Fletcher, I.R.

1980-01-01

Lead isotopic compositions of 12 galenas from five late Archaic-initial Woodland grave and habitation sites in southern Ontario have made it possible to determine the most likely source areas for the galenas. For one of the oldest sites (Finlan), the most likely source is in the southwestern Upper Mississippi Valley (Wisconsin-Illinois-Iowa) mineral district. The seven Finlan galenas exhibit a range of isotopic ratios; three of the largest specimens have substantial isotopic variations (up to 1.8% in the ratio of lead-207 to lead-206) on a scale of a few centimeters. This suggests that the lead isotopic zoning ascribed to the Upper Mississippi Valley area is not sufficiently well defined to enable us to determine if all the Finlan samples were derived from a single mineral deposit. Galenas from the other sites (Constance Bay, Hind, Bruce Boyd, and Picton) most probably originated in the southeastern Ontario-northwestern New York area. Isotopic differences among the Constance Bay, Hind, and Bruce Boyd galenas, on the one hand, and the Picton galena, on the other, suggest that at least two distinct sources in that region were exploited

Calcium Isotope Analysis by Mass Spectrometry

Science.gov (United States)

Boulyga, S.; Richter, S.

2010-12-01

The variations in the isotopic composition of calcium caused by fractionation in heterogeneous systems and by nuclear reactions can provide insight into numerous biological, geological, and cosmic processes, and therefore isotopic analysis finds a wide spectrum of applications in cosmo- and geochemistry, paleoclimatic, nutritional, and biomedical studies. The measurement of calcium isotopic abundances in natural samples has challenged the analysts for more than three decades. Practically all Ca isotopes suffer from significant isobaric interferences, whereas low-abundant isotopes can be particularly affected by neighboring major isotopes. The extent of natural variations of stable isotopes appears to be relatively limited, and highly precise techniques are required to resolve isotopic effects. Isotope fractionation during sample preparation and measurements and instrumental mass bias can significantly exceed small isotope abundance variations in samples, which have to be investigated. Not surprisingly, a TIMS procedure developed by Russell et al. (Russell et al., 1978. Geochim Cosmochim Acta 42: 1075-1090) for Ca isotope measurements was considered as revolutionary for isotopic measurements in general, and that approach is used nowadays (with small modifications) for practically all isotopic systems and with different mass spectrometric techniques. Nevertheless, despite several decades of calcium research and corresponding development of mass spectrometers, the available precision and accuracy is still not always sufficient to achieve the challenging goals. This presentation discusses figures of merits of presently used analytical methods and instrumentation, and attempts to critically assess their limitations. Additionally, the availability of Ca isotope reference materials will be discussed.

Stable isotopes and the environment

International Nuclear Information System (INIS)

Krouse, H.R.

1990-01-01

Whereas traditionally, stable isotope research has been directed towards resource exploration and development, it is finding more frequent applications in helping to assess the impacts of resource utilization upon ecosystems. Among the many pursuits, two themes are evident: tracing the transport and conversions of pollutants in the environment and better understanding of the interplay among environmental receptors, e.g. food web studies. Stable isotope data are used primarily to identify the presence of pollutants in the environment and with a few exceptions, the consequence of their presence must be assessed by other techniques. Increasing attention has been given to the isotopic composition of humans with many potential applications in areas such as paleodiets, medicine, and criminology. In this brief overview examples are used from the Pacific Rim to illustrate the above concepts. 26 refs., 1 tab., 3 figs

Automatic recognition of coronal type II radio bursts: The ARBIS 2 method and first observations

Science.gov (United States)

Lobzin, Vasili; Cairns, Iver; Robinson, Peter; Steward, Graham; Patterson, Garth

Major space weather events such as solar flares and coronal mass ejections are usually accompa-nied by solar radio bursts, which can potentially be used for real-time space weather forecasts. Type II radio bursts are produced near the local plasma frequency and its harmonic by fast electrons accelerated by a shock wave moving through the corona and solar wind with a typi-cal speed of 1000 km s-1 . The coronal bursts have dynamic spectra with frequency gradually falling with time and durations of several minutes. We present a new method developed to de-tect type II coronal radio bursts automatically and describe its implementation in an extended Automated Radio Burst Identification System (ARBIS 2). Preliminary tests of the method with spectra obtained in 2002 show that the performance of the current implementation is quite high, ˜ 80%, while the probability of false positives is reasonably low, with one false positive per 100-200 hr for high solar activity and less than one false event per 10000 hr for low solar activity periods. The first automatically detected coronal type II radio bursts are also presented. ARBIS 2 is now operational with IPS Radio and Space Services, providing email alerts and event lists internationally.

An Identification Key for Selecting Methods for Sustainability Assessments

Directory of Open Access Journals (Sweden)

Michiel C. Zijp

2015-03-01

Full Text Available Sustainability assessments can play an important role in decision making. This role starts with selecting appropriate methods for a given situation. We observed that scientists, consultants, and decision-makers often do not systematically perform a problem analyses that guides the choice of the method, partly related to a lack of systematic, though sufficiently versatile approaches to do so. Therefore, we developed and propose a new step towards method selection on the basis of question articulation: the Sustainability Assessment Identification Key. The identification key was designed to lead its user through all important choices needed for comprehensive question articulation. Subsequently, methods that fit the resulting specific questions are suggested by the key. The key consists of five domains, of which three determine method selection and two the design or use of the method. Each domain consists of four or more criteria that need specification. For example in the domain “system boundaries”, amongst others, the spatial and temporal scales are specified. The key was tested (retrospectively on a set of thirty case studies. Using the key appeared to contribute to improved: (i transparency in the link between the question and method selection; (ii consistency between questions asked and answers provided; and (iii internal consistency in methodological design. There is latitude to develop the current initial key further, not only for selecting methods pertinent to a problem definition, but also as a principle for associated opportunities such as stakeholder identification.

Technology-Enhanced Formative Assessment of Plant Identification

Science.gov (United States)

Conejo, Ricardo; Garcia-Viñas, Juan Ignacio; Gastón, Aitor; Barros, Beatriz

2016-04-01

Developing plant identification skills is an important part of the curriculum of any botany course in higher education. Frequent practice with dried and fresh plants is necessary to recognize the diversity of forms, states, and details that a species can present. We have developed a web-based assessment system for mobile devices that is able to pose appropriate questions according to the location of the student. A student's location can be obtained using the device position or by scanning a QR code attached to a dried plant sheet in a herbarium or to a fresh plant in an arboretum. The assessment questions are complemented with elaborated feedback that, according to the students' responses, provides indications of possible mistakes and correct answers. Three experiments were designed to measure the effectiveness of the formative assessment using dried and fresh plants. Three questionnaires were used to evaluate the system performance from the students' perspective. The results clearly indicate that formative assessment is objectively effective compared to traditional methods and that the students' attitudes towards the system were very positive.

Identifications of Einstein Slew Survey sources

Science.gov (United States)

Schachter, Jonathan F.; Elvis, Martin S.; Plummer, David; Fabbiano, G.

1992-01-01

The status of identifications of the Einstien Slew Survey, a bright soft x-ray catalog with 550 new x-ray sources, is discussed. Possible counterparts were found for greater than 95 percent of the Slew Survey based on positional coincidences and color-color diagnostics. The survey will be fully identified via upcoming radio and optical observations.

Radio frequency interference mitigation using deep convolutional neural networks

Science.gov (United States)

Akeret, J.; Chang, C.; Lucchi, A.; Refregier, A.

2017-01-01

We propose a novel approach for mitigating radio frequency interference (RFI) signals in radio data using the latest advances in deep learning. We employ a special type of Convolutional Neural Network, the U-Net, that enables the classification of clean signal and RFI signatures in 2D time-ordered data acquired from a radio telescope. We train and assess the performance of this network using the HIDE &SEEK radio data simulation and processing packages, as well as early Science Verification data acquired with the 7m single-dish telescope at the Bleien Observatory. We find that our U-Net implementation is showing competitive accuracy to classical RFI mitigation algorithms such as SEEK's SUMTHRESHOLD implementation. We publish our U-Net software package on GitHub under GPLv3 license.

Increased situation awareness in major incidents-radio frequency identification (RFID) technique: a promising tool.

Science.gov (United States)

Jokela, Jorma; Rådestad, Monica; Gryth, Dan; Nilsson, Helené; Rüter, Anders; Svensson, Leif; Harkke, Ville; Luoto, Markku; Castrén, Maaret

2012-02-01

In mass-casualty situations, communications and information management to improve situational awareness is a major challenge for responders. In this study, the feasibility of a prototype system that utilizes commercially available, low-cost components, including Radio Frequency Identification (RFID) and mobile phone technology, was tested in two simulated mass-casualty incidents. The feasibility and the direct benefits of the system were evaluated in two simulated mass-casualty situations: one in Finland involving a passenger ship accident resulting in multiple drowning/hypothermia patients, and another at a major airport in Sweden using an aircraft crash scenario. Both simulations involved multiple agencies and functioned as test settings for comparing the disaster management's situational awareness with and without using the RFID-based system. Triage documentation was done using both an RFID-based system, which automatically sent the data to the Medical Command, and a traditional method using paper triage tags. The situational awareness was measured by comparing the availability of up-to date information at different points in the care chain using both systems. Information regarding the numbers and status or triage classification of the casualties was available approximately one hour earlier using the RFID system compared to the data obtained using the traditional method. The tested prototype system was quick, stable, and easy to use, and proved to work seamlessly even in harsh field conditions. It surpassed the paper-based system in all respects except simplicity of use. It also improved the general view of the mass-casualty situations, and enhanced medical emergency readiness in a multi-organizational medical setting. The tested technology is feasible in a mass-casualty incident; further development and testing should take place.

Mercury stable isotope signatures of world coal deposits and historical coal combustion emissions.

Science.gov (United States)

Sun, Ruoyu; Sonke, Jeroen E; Heimbürger, Lars-Eric; Belkin, Harvey E; Liu, Guijian; Shome, Debasish; Cukrowska, Ewa; Liousse, Catherine; Pokrovsky, Oleg S; Streets, David G

2014-07-01

Mercury (Hg) emissions from coal combustion contribute approximately half of anthropogenic Hg emissions to the atmosphere. With the implementation of the first legally binding UNEP treaty aimed at reducing anthropogenic Hg emissions, the identification and traceability of Hg emissions from different countries/regions are critically important. Here, we present a comprehensive world coal Hg stable isotope database including 108 new coal samples from major coal-producing deposits in South Africa, China, Europe, India, Indonesia, Mongolia, former USSR, and the U.S. A 4.7‰ range in δ(202)Hg (-3.9 to 0.8‰) and a 1‰ range in Δ(199)Hg (-0.6 to 0.4‰) are observed. Fourteen (p coal Hg emissions tracing. A revised coal combustion Hg isotope fractionation model is presented, and suggests that gaseous elemental coal Hg emissions are enriched in the heavier Hg isotopes relative to oxidized forms of emitted Hg. The model explains to first order the published δ(202)Hg observations on near-field Hg deposition from a power plant and global scale atmospheric gaseous Hg. Yet, model uncertainties appear too large at present to permit straightforward Hg isotope source identification of atmospheric forms of Hg. Finally, global historical (1850-2008) coal Hg isotope emission curves were modeled and indicate modern-day mean δ(202)Hg and Δ(199)Hg values for bulk coal emissions of -1.2 ± 0.5‰ (1SD) and 0.05 ± 0.06‰ (1SD).

Senior radio listeners

DEFF Research Database (Denmark)

Blaakilde, Anne Leonora

Radiobroadcasting and the hardware materialization of radio have during the 20th century changed significantly, which means that senior radio listeners have travelled along with this evolution from large, impressive radio furnitures to DAB and small, wireless, mobile devices, and from grave...... and solemn radio voices to lightharted, laughing and chatting speakers. Senior radio listerners have experienced the development and refinements of technique, content and genres. It is now expected of all media users that they are capable of crossing media, combining, juggling and jumping between various...... media platforms, not the least when listening to radio. The elder generation is no exception from this. Recently, for instance, the Danish public broadcast DR has carried out an exodus of programmes targeted for the senior segment. These programmes are removed from regular FM and sent to DAB receivers...

The radio spectral energy distribution of infrared-faint radio sources

Science.gov (United States)

Herzog, A.; Norris, R. P.; Middelberg, E.; Seymour, N.; Spitler, L. R.; Emonts, B. H. C.; Franzen, T. M. O.; Hunstead, R.; Intema, H. T.; Marvil, J.; Parker, Q. A.; Sirothia, S. K.; Hurley-Walker, N.; Bell, M.; Bernardi, G.; Bowman, J. D.; Briggs, F.; Cappallo, R. J.; Callingham, J. R.; Deshpande, A. A.; Dwarakanath, K. S.; For, B.-Q.; Greenhill, L. J.; Hancock, P.; Hazelton, B. J.; Hindson, L.; Johnston-Hollitt, M.; Kapińska, A. D.; Kaplan, D. L.; Lenc, E.; Lonsdale, C. J.; McKinley, B.; McWhirter, S. R.; Mitchell, D. A.; Morales, M. F.; Morgan, E.; Morgan, J.; Oberoi, D.; Offringa, A.; Ord, S. M.; Prabu, T.; Procopio, P.; Udaya Shankar, N.; Srivani, K. S.; Staveley-Smith, L.; Subrahmanyan, R.; Tingay, S. J.; Wayth, R. B.; Webster, R. L.; Williams, A.; Williams, C. L.; Wu, C.; Zheng, Q.; Bannister, K. W.; Chippendale, A. P.; Harvey-Smith, L.; Heywood, I.; Indermuehle, B.; Popping, A.; Sault, R. J.; Whiting, M. T.

2016-10-01

Context. Infrared-faint radio sources (IFRS) are a class of radio-loud (RL) active galactic nuclei (AGN) at high redshifts (z ≥ 1.7) that are characterised by their relative infrared faintness, resulting in enormous radio-to-infrared flux density ratios of up to several thousand. Aims: Because of their optical and infrared faintness, it is very challenging to study IFRS at these wavelengths. However, IFRS are relatively bright in the radio regime with 1.4 GHz flux densities of a few to a few tens of mJy. Therefore, the radio regime is the most promising wavelength regime in which to constrain their nature. We aim to test the hypothesis that IFRS are young AGN, particularly GHz peaked-spectrum (GPS) and compact steep-spectrum (CSS) sources that have a low frequency turnover. Methods: We use the rich radio data set available for the Australia Telescope Large Area Survey fields, covering the frequency range between 150 MHz and 34 GHz with up to 19 wavebands from different telescopes, and build radio spectral energy distributions (SEDs) for 34 IFRS. We then study the radio properties of this class of object with respect to turnover, spectral index, and behaviour towards higher frequencies. We also present the highest-frequency radio observations of an IFRS, observed with the Plateau de Bure Interferometer at 105 GHz, and model the multi-wavelength and radio-far-infrared SED of this source. Results: We find IFRS usually follow single power laws down to observed frequencies of around 150 MHz. Mostly, the radio SEDs are steep (α IFRS show statistically significantly steeper radio SEDs than the broader RL AGN population. Our analysis reveals that the fractions of GPS and CSS sources in the population of IFRS are consistent with the fractions in the broader RL AGN population. We find that at least % of IFRS contain young AGN, although the fraction might be significantly higher as suggested by the steep SEDs and the compact morphology of IFRS. The detailed multi

The radio universe

International Nuclear Information System (INIS)

Worvill, R.

1977-01-01

Elementary description of the development of radioastronomy, radio waves from the sun and planets, the use of radio telescopes and the detection of nebulae, supernova, radio galaxies and quasars is presented. A brief glossary of terms is included. (UK)

Revisiting climate changes. Isotope studies open scientific windows to the past

International Nuclear Information System (INIS)

Gibson, John; Aggarwal, Pradeep

2001-01-01

Earlier this year, scientists warned that 'an increasing body of observations gives a collective picture of a warming world and other changes in the climate system'. The conclusion came from the third assessment report of the Intergovernmental Panel on Climate Change (IPCC). Today, it is widely accepted that recent warning is largely a product of enhanced greenhouse gas concentrations in the atmosphere derived from post-industrial combustion of fossil fuels and biomass energy sources. However, great uncertainty remains regarding the causal relationships between specific parameters and climate phenomena, and regarding the impacts of climate change on the earth's water cycle. The science of climate change is dynamic. The IAEA contributes to studies via coordination of climate research, participation and support for international scientific programmes, and dissemination of isotope technology and applications. The third quadrennial scientific gathering on the use of isotopes for studying environmental change was held at the IAEA in Vienna 23-27 April 2001. The Conference - attended by 150 experts from 38 countries and seven international organizations - served as an important forum for presentation of results, discussion of ideas and concepts, establishment of international collaboration, and identification of avenues for future research. Selected highlights of issues discussed include: Isotopes are being used as validation tools for predicting impacts of deforestation of the Amazon Basin and for examining the past isotope signals of El Nino events; Isotope signatures in ice cores from low-latitude environments are showing similar temperature signals to polar ice cores,suggesting widespread (global) changes in the past; Isotopes are being used in the World Ocean Circulation Experiment to trace the movement, mixing and residence time of oceanic circulation patterns. Changes in ocean circulation are one of the most important factors controlling the variability of the

Prediction of scour depth in gravel bed rivers using radio frequency IDs : application to the Skagit River.

Science.gov (United States)

2013-10-01

The overarching goal of the proposed research was to develop, test and verify a robust system based on the Low Frequency (134.2 : kHz), passive Radio Frequency Identification (RFID) technology to be ultimately used for determining the maximum scour d...

Design and Analysis of Double-Gate MOSFETs for Ultra-Low Power Radio Frequency Identification (RFID: Device and Circuit Co-Design

Directory of Open Access Journals (Sweden)

Tony T. Kim

2011-07-01

Full Text Available Recently, double-gate MOSFETs (DGMOSFETs have been shown to be more optimal for ultra-low power circuit design due to the improved subthreshold slope and the reduced leakage current compared to bulk CMOS. However, DGMOSFETs for subthreshold circuit design have not been much explored in comparison to those for strong inversion-based design. In this paper, various configurations of DGMOSFETs, such as tied/independent gates and symmetric/asymmetric gate oxide thickness are explored for ultra-low power and high efficient radio frequency identification (RFID design. Comparison of bulk CMOS with DGMOSFETs has been conducted in ultra-low power subthreshold digital logic design and rectifier design, emphasizing the scope of the nano-scale DGMOSFET technology for future ultra-low power systems. The DGMOSFET-based subthreshold logic improves energy efficiency by more than 40% compared to the bulk CMOS-based logic at 32 nm. Among the various DGMOSFET configurations for RFID rectifiers, symmetric tied-gate DGMOSFET has the best power conversion efficiency and the lowest power consumption.

The radio properties of infrared-faint radio sources

Science.gov (United States)

Middelberg, E.; Norris, R. P.; Hales, C. A.; Seymour, N.; Johnston-Hollitt, M.; Huynh, M. T.; Lenc, E.; Mao, M. Y.

2011-02-01

Context. Infrared-faint radio sources (IFRS) are objects that have flux densities of several mJy at 1.4 GHz, but that are invisible at 3.6 μm when using sensitive Spitzer observations with μJy sensitivities. Their nature is unclear and difficult to investigate since they are only visible in the radio. Aims: High-resolution radio images and comprehensive spectral coverage can yield constraints on the emission mechanisms of IFRS and can give hints to similarities with known objects. Methods: We imaged a sample of 17 IFRS at 4.8 GHz and 8.6 GHz with the Australia Telescope Compact Array to determine the structures on arcsecond scales. We added radio data from other observing projects and from the literature to obtain broad-band radio spectra. Results: We find that the sources in our sample are either resolved out at the higher frequencies or are compact at resolutions of a few arcsec, which implies that they are smaller than a typical galaxy. The spectra of IFRS are remarkably steep, with a median spectral index of -1.4 and a prominent lack of spectral indices larger than -0.7. We also find that, given the IR non-detections, the ratio of 1.4 GHz flux density to 3.6 μm flux density is very high, and this puts them into the same regime as high-redshift radio galaxies. Conclusions: The evidence that IFRS are predominantly high-redshift sources driven by active galactic nuclei (AGN) is strong, even though not all IFRS may be caused by the same phenomenon. Compared to the rare and painstakingly collected high-redshift radio galaxies, IFRS appear to be much more abundant, but less luminous, AGN-driven galaxies at similar cosmological distances.

Elementary study of encapsulation of radioisotope battery prototype based on 63Ni radio-voltaic effect

International Nuclear Information System (INIS)

Gao Hui; Zhang Huaming; Luo Shunzhong; Wang Heyi; Fu Zhonghua

2012-01-01

For isotope battery application, it is necessary to encapsulate in a certain method. After having accomplished selection of material composing and proportion, procedure and encapsulating process based on GD3217Y detector. the different types of device come from untouched, loaded by slip of stainless steel with or without 63 Ni isotope were encapsulated respectively. Despite necessary reliability of package has been evaluated in the previous work. in view of specialty due to the incorporation of radioactive isotopes into device, the reliability issue must be further taken into account for actual application. Hence, we emphasize on the comparison about electrical capability of types of devices under the different situations, namely, before and after encapsulation, the natural aging and artificial accelerated aging. The results of the comparison indicate that the adoption of the method of the encapsulation supply effectively stable electrical capability at the condition of ensuring safety of radioactive source besides improving environmental adaptability for device. Further, it offers technological support for the encapsulation of radioisotope battery based on β radio-voltaic effect. (authors)

Worldwide lead-isotope ratio in bivalves and sediments

DEFF Research Database (Denmark)

Larsen, Martin Mørk; Jacobsen, Gitte; Strand, Jakob

The lead-isotope ratio have been used to assess and identify impact of leaded gasoline, coal combustion and  mineral activities[ref 1] due to the difference in 206Pb (~52%), 207Pb (~24%) and 208Pb (~23%) isotope ratios. The source of these differences is the decaying of the parent isotopes of 238U...

Isotope and chemical techniques in assessing groundwater contamination from Metro Manila landfill

International Nuclear Information System (INIS)

Castaneda, Soledad S.; Almoneda, Rosalina V.; Ascano, Luz; Del Castillo, Lorena A.; Fernandez, Lourdes G.; Sucgang, Raymond J.; Iblan, Cynthia L.; Baui, Daniel G.

2007-01-01

The first objective of the investigations is establishing benchmark isotopic characteristics of water sources and baseline concentrations of main environmental parameters related to contamination from the landfill. Water samples were collected from the production wells and surface water in the municipalities in proximity of the landfill, in Rodriguez and in San Mateo. Stable isotope characterization of the deep groundwater and rivers shows isotopic values clustering along the LMWL with ae 18 O ranging from -7.5 promille to -6.5 promille and ae 2 H ranging from - 53.59 promille to -42.91. The shallow groundwater are more isotopically enriched trending towards the evaporation line, with mean ae 18 O and aeD values of -6.46 promille and -44.14 promille, respectively. The mean isotopic signatures of surface water, with mean ae 18 O of -7.19 promille and deep groundwater, with mean ae 18 O of -6.67 promille, in Rodriguez are significantly distinct. San Mateo groundwater appear to be more isotopically enriched, indicating recharge different from that of Rodriguez groundwater. Leachate from the landfill exhibits a distinct isotopic composition from the freshwaters, with ae 18 O and aeD values of -5.58 promille and -31.66 promille. The significant differences in the isotopic signatures of the different water sources in the study area would facilitate detection of contamination from leachate run-off to the surface water, and eventually, to the groundwater. Trace metals in the water samples collected, generally, were below the regulatory limits for drinking water and surface water. Results of elemental determination in the sediment samples obtained from rivers showed that aside from the major crustal elements, Zn, Cu, and Ni were also present in significant amount. (author)

Radio Gaga? Intra-team communication of Australian Rules Football umpires - effect of radio communication on content, structure and frequency.

Science.gov (United States)

Neville, Timothy J; Salmon, Paul M; Read, Gemma J M

2018-02-01

Intra-team communication plays an important role in team effectiveness in various domains including sport. As such, it is a key consideration when introducing new tools within systems that utilise teams. The difference in intra-team communication of Australian Rules Football (AFL) umpiring teams was studied when umpiring with or without radio communications technology. A cross-sectional observational study was conducted to analyse the verbal communication of seven umpiring teams (20 participants) grouped according to their experience with radio communication. The results identified that radio communication technology increased the frequency and altered the structure of intra-team communication. Examination of the content of the intra-team communication identified impacts on the 'Big Five' teamwork behaviours and associated coordinating mechanisms. Analysis revealed that the communications utilised did not align with the closed-loop form of communication described in the Big Five model. Implications for teamwork models, coaching and training of AFL umpires are discussed. Practitioner Summary: Assessing the impact of technology on performance is of interest to ergonomics practitioners. The impact of radio communications on teamwork is explored in the highly dynamic domain of AFL umpiring. When given radio technology, intra-team communication increased which supported teamwork behaviours, such as backup behaviour and mutual performance monitoring.

Radio Frequency Interference: The Study of Rain Effect on Radio Signal Attenuation

International Nuclear Information System (INIS)

Roslan Umar; Roslan Umar; Shahirah Syafa Sulan; Atiq Wahidah Azlan; Zainol Abidin Ibrahim

2015-01-01

The intensity of radio waves received by radio telescopes is always not subject to human control. In the millimetre band, the propagation of the electromagnetic waves is severely affected by rain rate, dust particle size and drop size in the terms of attenuation, noise and depolarization. At the frequency above 10 GHz, the absorption and scattering by rain cause a reduction in the transmitted signal amplitude which will lead to the reducing of the availability, reliability and performance on the communications link. In this study, the rain effect on radio signal has been investigated. Spectrum analyzer and weather stations were used to obtain the RFI level and rain rate data respectively. The radio frequency interference (RFI) pattern due to rain factor was determined. This will benefit radio astronomer in managing sites for radio observation for radio astronomy purposes. (author)

Identification of Marchfeld asparagus using Sr isotope ratio measurements by MC-ICP-MS.

Science.gov (United States)

Swoboda, S; Brunner, M; Boulyga, S F; Galler, P; Horacek, M; Prohaska, T

2008-01-01

This work focuses on testing and application of Sr isotope signatures for the fast and reliable authentication and traceability of Asparagus officinalis originating from Marchfeld, Austria, using multicollector inductively coupled plasma mass spectrometry after optimised Rb/Sr separation. The major sample pool comprises freeze-dried and microwave-digested asparagus samples from Hungary and Slovakia which are compared with Austrian asparagus originating from the Marchfeld region, which is a protected geographical indication. Additional samples from Peru, The Netherlands and Germany were limited in number and allowed therefore only restricted statistical evaluation. Asparagus samples from Marchfeld were harvested within two subsequent years in order to investigate the annual variation. The results show that the Sr isotope ratio is consistent within these 2 years of investigation. Moreover, the Sr isotope ratio of total Sr in soil was found to be significantly higher than in an NH4NO3 extract, reflecting the mobile (bioavailable) phase. The isotope composition in the latter extract corresponds well to the range found in the asparagus samples in Marchfeld, even though the concentration of Sr in asparagus shows no direct correlation to the concentration of Sr in the mobile phase of the soil. The major question was whether the 'Marchfelder Spargel' can be distinguished from samples from the neighbouring countries of Hungary and Slovakia. According to our findings, they can be clearly (100%) singled out from the Hungarian samples and can be distinguished from the Slovakian asparagus samples with a probability of more than 80%.

Department of Defense need for a micro-electromechanical systems (MEMS) reliability assessment program

Science.gov (United States)

Zunino, James L., III; Skelton, Donald

2005-01-01

As the United States (U.S.) Army transforms into a lighter, more lethal, and more agile force, the technologies that support both legacy and emerging weapon systems must decrease in size while increasing in intelligence. Micro-electromechanical systems (MEMS) are one such technology that the Army as well as entire DOD will heavily rely on in achieving these objectives. Current and future military applications of MEMS devices include safety and arming devices, guidance systems, sensors/detectors, inertial measurement units, tracking devices, radio frequency devices, wireless radio frequency identification (RFID), etc. Even though the reliance on MEMS devices has been increasing, there have been no studies performed to determine their reliability and failure mechanisms. Furthermore, no standardized test protocols exist for assessing reliability. Accordingly, the U.S. Army Corrosion Office at Picatinny, NJ has initiated the MEMS Reliability Assessment Program to address this issue.

mathematical models for estimating radio channels utilization

African Journals Online (AJOL)

2017-08-08

Aug 8, 2017 ... Mathematical models for radio channels utilization assessment by real-time flows transfer in ... data transmission networks application having dynamic topology ..... Journal of Applied Mathematics and Statistics, 56(2): 85–90.

Radio Occultation Experiments with Venus Express and Mars Express using the Planetary Radio Interferometry and Doppler Experiment (PRIDE) Technique

Science.gov (United States)

Bocanegra Bahamon, T.; Gurvits, L.; Molera Calves, G.; Cimo, G.; Duev, D.; Pogrebenko, S.; Dirkx, D.; Rosenblatt, P.

2017-12-01

The Planetary Radio Interferometry and Doppler Experiment (PRIDE) is a technique that can be used to enhance multiple radio science experiments of planetary missions. By 'eavesdropping' on the spacecraft signal using radio telescopes from different VLBI networks around the world, the PRIDE technique provides precise open-loop Doppler and VLBI observables to able to reconstruct the spacecraft's orbit. The application of this technique for atmospheric studies has been assessed by observing ESA's Venus Express (VEX) and Mars Express (MEX) during multiple Venus and Mars occultation events between 2012 and 2014. From these observing sessions density, temperature and pressure profiles of Venus and Mars neutral atmosphere and ionosphere have been retrieved. We present an error propagation analysis where the uncertainties of the atmospheric properties measured with this technique have been derived. These activities serve as demonstration of the applicability of the PRIDE technique for radio occultation studies, and provides a benchmark against the traditional Doppler tracking provided by the NASA's DSN and ESA's Estrack networks for these same purposes, in the framework of the upcoming ESA JUICE mission to the Jovian system.

Isotopic Analysis of Fingernails as a USGS Open House Demonstration of the Use of Stable Isotopes in Foodweb Studies

Science.gov (United States)

Silva, S. R.; Kendall, C.; Young, M. B.; Choy, D.

2011-12-01

The USGS Isotope Tracers Project uses stable isotopes and tritium to add a unique dimension of chemical information to a wide range of environmental investigations. The use and application of isotopes is usually an unfamiliar and even esoteric topic to the general public. Therefore during three USGS open house events, as a public outreach effort, we demonstrated the use of stable isotopes by analyzing nitrogen and carbon isotopes from very small fragments of fingernail from willing participants. We titled the exhibit "You Are What You Eat". The results from all participants were plotted on a graph indicating the general influence of different food groups on the composition of body tissues as represented by fingernails. All participants were assigned a number and no personal-identification information was collected. A subset of participants provided us with an estimate of the number of days a week various foods were eaten and if they were vegetarians, vegans or non-vegetarians. Volunteers from our research group were on hand to explain and discuss fundamental concepts such as how foods attain their isotopic composition, the difference between C3 and C4 plants, the effects of assimilation, trophic enrichment, and the various uses of stable isotopes in environmental studies. The results of the fingernail analyses showed the variation of the range of isotopic compositions among about 400 people at each event, the distinct influence of C4 plants (mainly corn and cane sugar) on our carbon isotopic composition, and the isotopic differences between vegetarians and non vegetarians among other details (http://wwwrcamnl.wr.usgs.gov/isoig/projects/fingernails/). A poll of visitors attending the open house event in 2006 indicated that "You Are What You Eat" was among the most popular exhibits. Following the first two open house events we were contacted by a group of researchers from Brazil who had completed a very similar study. Our collaboration resulted in a publication in

Development of versatile isotopic labeling reagents for profiling the amine submetabolome by liquid chromatography–mass spectrometry

International Nuclear Information System (INIS)

Zhou, Ruokun; Huan, Tao; Li, Liang

2015-01-01

Highlights: • Two new reagents were developed for chemical isotope labeling mass spectrometry (MS). • They could be used to label amine-containing metabolites in a metabolomic sample. • The labeled metabolites could be detected with much improved sensitivity in MS. • One of the reagents could also help generate useful MS/MS spectra for structural analysis. • These reagents should be useful for quantitative metabolomics. - Abstract: Metabolomic profiling involves relative quantification of metabolites in comparative samples and identification of the significant metabolites that differentiate different groups (e.g., diseased vs. controls). Chemical isotope labeling (CIL) liquid chromatography–mass spectrometry (LC–MS) is an enabling technique that can provide improved metabolome coverage and metabolite quantification. However, chemical identification of labeled metabolites can still be a challenge. In this work, a new set of isotopic labeling reagents offering versatile properties to enhance both detection and identification are described. They were prepared by a glycine molecule (or its isotopic counterpart) and an aromatic acid with varying structures through a simple three-step synthesis route. In addition to relatively low costs of synthesizing the reagents, this reaction route allows adjusting reagent property in accordance with the desired application objective. To date, two isotopic reagents, 4-dimethylaminobenzoylamido acetic acid N-hydroxylsuccinimide ester (DBAA-NHS) and 4-methoxybenzoylamido acetic acid N-hydroxylsuccinimide ester (MBAA-NHS), for labeling the amine-containing metabolites (i.e., amine submetabolome) have been synthesized. The labeling conditions and the related LC–MS method have been optimized. We demonstrate that DBAA labeling can increase the metabolite detectability because of the presence of an electrospray ionization (ESI)-active dimethylaminobenzoyl group. On the other hand, MBAA labeled metabolites can be fragmented

Development of versatile isotopic labeling reagents for profiling the amine submetabolome by liquid chromatography–mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

Zhou, Ruokun; Huan, Tao; Li, Liang, E-mail: Liang.Li@ualberta.ca

2015-06-30

Highlights: • Two new reagents were developed for chemical isotope labeling mass spectrometry (MS). • They could be used to label amine-containing metabolites in a metabolomic sample. • The labeled metabolites could be detected with much improved sensitivity in MS. • One of the reagents could also help generate useful MS/MS spectra for structural analysis. • These reagents should be useful for quantitative metabolomics. - Abstract: Metabolomic profiling involves relative quantification of metabolites in comparative samples and identification of the significant metabolites that differentiate different groups (e.g., diseased vs. controls). Chemical isotope labeling (CIL) liquid chromatography–mass spectrometry (LC–MS) is an enabling technique that can provide improved metabolome coverage and metabolite quantification. However, chemical identification of labeled metabolites can still be a challenge. In this work, a new set of isotopic labeling reagents offering versatile properties to enhance both detection and identification are described. They were prepared by a glycine molecule (or its isotopic counterpart) and an aromatic acid with varying structures through a simple three-step synthesis route. In addition to relatively low costs of synthesizing the reagents, this reaction route allows adjusting reagent property in accordance with the desired application objective. To date, two isotopic reagents, 4-dimethylaminobenzoylamido acetic acid N-hydroxylsuccinimide ester (DBAA-NHS) and 4-methoxybenzoylamido acetic acid N-hydroxylsuccinimide ester (MBAA-NHS), for labeling the amine-containing metabolites (i.e., amine submetabolome) have been synthesized. The labeling conditions and the related LC–MS method have been optimized. We demonstrate that DBAA labeling can increase the metabolite detectability because of the presence of an electrospray ionization (ESI)-active dimethylaminobenzoyl group. On the other hand, MBAA labeled metabolites can be fragmented

Mean and Extreme Radio Properties of Quasars and the Origin of Radio Emission

Science.gov (United States)

Richards, Gordon T.; Kratzer, R.

2014-01-01

We explore the evolution of the fraction of radio loud quasars and the mean radio properties of quasars. Although any quasar has only a ~10% chance of being radio loud and the average quasar has a radio luminosity of ~4x10^30 ergs/s/Hz, these properties are strong functions of not only luminosity, redshift, black hole mass, and accretion rate, but also the strength of the accretion disk wind (as characterized by CIV emission line properties). Quasars with higher optical luminosity and/or lower redshift have a higher than average probability of being radio loud, but their median radio luminosity (relative to optical) is much lower than average. We find that, while radio properties of quasars generally cannot be predicted from their optical properties, objects where one expects a strong radiation line driven wind (based on emission line features) have virtually no chance of being radio loud. The redder quasars are in the optical, the more radio flux (relative to optical) they have; this trend holds even for quasars that are not expected to be significantly dust reddened/extincted in the optical. Finally, we consider the radio properties of quasars in the framework of models which describe the radio loud extrema as being due to particularly high spin resulting from second generation mergers and in the context of star formation at lower levels of radio flux. This work was supported by NSF AAG grant 1108798.

Reliability of System Identification Techniques to Assess Standing Balance in Healthy Elderly.

Directory of Open Access Journals (Sweden)

Jantsje H Pasma

Full Text Available System identification techniques have the potential to assess the contribution of the underlying systems involved in standing balance by applying well-known disturbances. We investigated the reliability of standing balance parameters obtained with multivariate closed loop system identification techniques.In twelve healthy elderly balance tests were performed twice a day during three days. Body sway was measured during two minutes of standing with eyes closed and the Balance test Room (BalRoom was used to apply four disturbances simultaneously: two sensory disturbances, to the proprioceptive and the visual system, and two mechanical disturbances applied at the leg and trunk segment. Using system identification techniques, sensitivity functions of the sensory disturbances and the neuromuscular controller were estimated. Based on the generalizability theory (G theory, systematic errors and sources of variability were assessed using linear mixed models and reliability was assessed by computing indexes of dependability (ID, standard error of measurement (SEM and minimal detectable change (MDC.A systematic error was found between the first and second trial in the sensitivity functions. No systematic error was found in the neuromuscular controller and body sway. The reliability of 15 of 25 parameters and body sway were moderate to excellent when the results of two trials on three days were averaged. To reach an excellent reliability on one day in 7 out of 25 parameters, it was predicted that at least seven trials must be averaged.This study shows that system identification techniques are a promising method to assess the underlying systems involved in standing balance in elderly. However, most of the parameters do not appear to be reliable unless a large number of trials are collected across multiple days. To reach an excellent reliability in one third of the parameters, a training session for participants is needed and at least seven trials of two

A DEEP VERY LARGE ARRAY RADIO CONTINUUM SURVEY OF THE CORE AND OUTSKIRTS OF THE COMA CLUSTER

International Nuclear Information System (INIS)

Miller, Neal A.; Hornschemeier, Ann E.; Mobasher, Bahram

2009-01-01

We present deep 1.4 GHz Very Large Array radio continuum observations of two ∼0.5 deg 2 fields in the Coma cluster of galaxies. The two fields, 'Coma 1' and 'Coma 3', correspond to the cluster core and southwest infall region and were selected on account of abundant preexisting multiwavelength data. In their most sensitive regions the radio data reach 22 μJy rms per 4.''4 beam, sufficient to detect (at 5σ) Coma member galaxies with L 1.4 G Hz = 1.3 x 10 20 W Hz -1 . The full catalog of radio detections is presented herein and consists of 1030 sources detected at ≥5σ, 628 of which are within the combined Coma 1 and Coma 3 area. We also provide optical identifications of the radio sources using data from the Sloan Digital Sky Survey. The depth of the radio observations allows us to detect active galactic nucleus in cluster elliptical galaxies with M r r r ∼ sun yr -1 .

Ore-lead isotopes and Grenville plate tectonics

International Nuclear Information System (INIS)

Farquhar, R.M.; Fletcher, I.R.

1980-01-01

Recent advances in the 'whole earth' modelling of evolutionary processes of Pb isotopes shed light upon the origin of the metals found in various types of ore deposits. On the bases of these models and several recently published data sets, we believe that the ore deposits formed in various plate tectonic environments may carry 'isotopic fingerprints' which, when used with other characteristics such as mineral assemblages, may identify the depositional environments of many ore bodies. In the present study Pb-isotopic measurements have been made of a number of Precambrain mineralization types and localities throughout the Central Metasedimentary Belt of the Grenville Province. The data for individual deposits are at best ambiguous, but fall into two groups sufficiently distinctive to allow some degree of 'fingerprint' identification. Comparisons with data from other areas suggest that the major periods of sedimentation within the Central Metasedimentary Belt accompanied plate rifting and/or island arc tectonic activity, with most of the mineralized lead being derived from mantle sources. Detailed comparisons between the Grenville and other regions are uncertain, mainly because there are few detailed high-accuracy data sets from younger, tectonically unambiguous mineral occurrences. We suggest that once these data sets are availble, isotopic fingerprinting may become diagnostic for deposits ranging well back into the Precambrain

Vitamin A metabolism, kinetic behavior and utilization: Rationale for the continued development and use of an isotope dilution technique for assessing vitamin A stores in human populations

International Nuclear Information System (INIS)

Green, M.H.

1997-01-01

The paper discusses the applicability of isotope dilution method in general and oral isotope dilution in particular to the assessment of vitamin A status in humans. It also highlights some aspects of vitamin A intake and metabolism as related to isotope dilution method. Areas of methodological research and development in vitamin A research are also proposed

Applications of stable isotopes in clinical pharmacology

NARCIS (Netherlands)

Schellekens, Reinout C A; Stellaard, Frans; Woerdenbag, Herman J; Frijlink, Henderik W; Kosterink, Jos G W

2011-01-01

This review aims to present an overview of the application of stable isotope technology in clinical pharmacology. Three main categories of stable isotope technology can be distinguished in clinical pharmacology. Firstly, it is applied in the assessment of drug pharmacology to determine the

Development of a wireless protection against imitation system for identification and control of vehicle access

Directory of Open Access Journals (Sweden)

Aleksei A. Gavrishev

2018-03-01

Full Text Available This article deals with wireless systems for identification and control of vehicle access to protected objects. Known systems are considered. As a result, it has been established that one of the most promising approaches to identifying and controlling vehicle access to protected objects is the use of systems based on the "friend or foe" principle. Among these systems, there are "one-directional" and "bedirectional" identification and access control systems. "Bidirectional" systems are more preferable for questions of identification and access control. However, at present, these systems should have a reduced probability of recognizing the structure of the request and response signals because the potential attacker can easily perform unauthorized access to the radio channel of the system. On this basis, developed a wireless system identification and control vehicle access to protected objects based on the principle of "friend or foe", featuring increased protection from unauthorized access and jamming through the use of rewritable drives chaotic sequences. In addition, it’s proposed to use to identify the vehicle's RFID tag containing additional information about it. Are some specifications of the developed system (the possible frequency range of the request-response signals, the communication range, data rate, the size of the transmitted data, guidelines for choosing RFID. Also, with the help of fuzzy logic, was made the security assessment from unauthorized access request-response signals based on the system of "friend or foe", which are transferred via radio channel, developed systems and analogues. The security assessment of the developed system shows an adequate degree of protection against complex threats (view, spoofing, interception and jamming of traffic in comparison with known systems of this class. Among the main advantages of the developed system it’s necessary to mention increased security from unauthorized access and jamming

A new class of medicament: radioactivity isotopes (1962)

International Nuclear Information System (INIS)

Cohen, Y.

1962-01-01

Very many radioelement are used in medicine, either for diagnosis or as therapeutics. The development of medicine has entailed an increase in the number of application of radioactive isotopes. Firstly used in the form of simple inorganic molecules for diagnosis or as anticancer therapeutics, radioelements are now used for labelling organic molecules, allowing functional specific studies of any kind of nature. Their production is made difficult by their radio-active properties. Their pharmaceutical properties, determined by tests and controls, depend either from radiochemistry and from medicine. The author reminds, in this report, the methods for the preparation and analysis, and set out the medical application. (author) [fr

Simultaneous Assessment of Speech Identification and Spatial Discrimination

Directory of Open Access Journals (Sweden)

Jennifer K. Bizley

2015-12-01

Full Text Available With increasing numbers of children and adults receiving bilateral cochlear implants, there is an urgent need for assessment tools that enable testing of binaural hearing abilities. Current test batteries are either limited in scope or are of an impractical duration for routine testing. Here, we report a behavioral test that enables combined testing of speech identification and spatial discrimination in noise. In this task, multitalker babble was presented from all speakers, and pairs of speech tokens were sequentially presented from two adjacent speakers. Listeners were required to identify both words from a closed set of four possibilities and to determine whether the second token was presented to the left or right of the first. In Experiment 1, normal-hearing adult listeners were tested at 15° intervals throughout the frontal hemifield. Listeners showed highest spatial discrimination performance in and around the frontal midline, with a decline at more eccentric locations. In contrast, speech identification abilities were least accurate near the midline and showed an improvement in performance at more lateral locations. In Experiment 2, normal-hearing listeners were assessed using a restricted range of speaker locations designed to match those found in clinical testing environments. Here, speakers were separated by 15° around the midline and 30° at more lateral locations. This resulted in a similar pattern of behavioral results as in Experiment 1. We conclude, this test offers the potential to assess both spatial discrimination and the ability to use spatial information for unmasking in clinical populations.

Radiation detection technology assessment program (RADTAP)

International Nuclear Information System (INIS)

Smith, D.E.

1998-01-01

The U.S. Customs Service and the U.S. Department of Energy (DOE) conducted a technical and operational assessment of gamma ray radiation detection equipment during the period May 5-16, 1997 at a testing facility in North Carolina. The effort was entitled, ''Radiation Detection Technology Assessment Program (RADTAP)'', and was conducted for the purpose of assessing the applicability, sensitivity and robustness of a diverse suite of gamma ray detection and identification equipment for possible use by Customs and other law enforcement agencies. Thirteen companies entered 25 instruments into the assessment program. All detection equipment entered had to exhibit a minimum sensitivity of 20 micro-R per hour (background included) from a Cesium-137 point source. Isotope identifying spectrometers entered were man portable and operable at room temperature with read-out that could be interpreted by non-technical personnel. Radioactive sources used in the assessment included special nuclear material, industrial and health isotopes. Evaluators included Customs inspectors and technical experts from DOE and Customs. No conclusions or recommendations were issued based on the quantitative and qualitative test results, however, the results of the program provided law enforcement agencies with the necessary data to select equipment that best meets their operational needs and budgets. (author)

The use of stable isotope compositions of selected elements in food origin control

International Nuclear Information System (INIS)

Wierzchnicki, R.

2002-01-01

Stable isotope ratios have been used widely for authentication of foodstuffs especially for detection of added water and sugar in fruit juices and wines. Hydrogen and oxygen composition are particularly interesting probes for geographical origin and authenticity identification. Carbon and nitrogen composition of fruits contains the finger-print of their metabolism and growing condition. Exemplary data are presented which demonstrated the usefulness of the Isotope Ratio Mass Spectrometry (IRMS) methods for authenticating wines and fruits (juice and pulp). (author)

Personal Identification and the Assessment of the Psychophysiological State While Writing a Signature

Directory of Open Access Journals (Sweden)

Pavel Lozhnikov

2015-08-01

Full Text Available This article discusses the problem of user identification and psychophysiological state assessment while writing a signature using a graphics tablet. The solution of the problem includes the creation of templates containing handwriting signature features simultaneously with the hidden registration of physiological parameters of a person being tested. Heart rate variability description in the different time points is used as a physiological parameter. As a result, a signature template is automatically generated for psychophysiological states of an identified person. The problem of user identification and psychophysiological state assessment is solved depending on the registered value of a physiological parameter.

Assessment of methods for analyzing gaseous mixtures of hydrogen isotopes and helium

International Nuclear Information System (INIS)

Attalla, A.; Bishop, C.T.; Bohl, D.R.; Buxton, T.L.; Sprague, R.E.; Warner, D.K.

1976-01-01

Mass spectrographic methods have served well in the past to analyze gaseous mixtures of the hydrogen isotopes. Alternate methods of analyses are reviewed which offer wider ranges and variety of isotopic determinations. This report describes possible improvements of the mass spectrographic determinations, gas chromatography, anti-Stokes Raman spectroscopy, microwave-induced optical emission spectroscopy, and methods of measuring tritium using radiation detection devices. Precision, accuracy, limitations, and costs are included for some of the methods mentioned. Costs range from $70,000 for the anti-Stokes Raman spectroscopy equipment, which can determine hydrogen isotopes but not helium, to less than $10,000 for the gas chromatographic equipment, which can determine hydrogen isotopes and helium with precision and accuracy comparable to those of the mass spectrometer

The Extent of DoD Influence on the Development and Application of Radio Frequency (RFID) Technology in the Civilian Sector

National Research Council Canada - National Science Library

Acevedo, Rafael A; Cooper, Robert W

2005-01-01

... the Internet. The internet, however, was conceived in the minds of government employees. Just as Government influenced the development of the internet, the same can be said of Radio Frequency Identification (RFID) Technology...