WorldWideScience

Sample records for assembly concurrent resolution

  1. Incentives for Improving Undergraduate Teaching in the California Community Colleges. A Report to the Chancellor's Office on Assembly Concurrent Resolution (ACR) 39, Hayden.

    Science.gov (United States)

    McHargue, Michael

    This report details the response of the Board of Governors of the California Community Colleges to Assembly Concurrent Resolution (ACR) Number 39 (Hayden), known as "Incentives for Improving Undergraduate Teaching." Part 1 provides the background and recent history of community college faculty development. Part 2 describes the current faculty…

  2. A report on high-level nuclear waste transportation: Prepared pursuant to assembly concurrent resolution No. 8 of the 1987 Nevada Legislature

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-01

    This report has been prepared by the staff of the State of Nevada Agency for Nuclear Projects/Nuclear Waste Project Office (NWPO) in response to Assembly Concurrent Resolution No. 8 (ACR 8), passed by the Nevada State Legislature in 1987. ACR 8 directed the NWPO, in cooperation with affected local governments and the Legislative committee on High-Level Radioactive Waste, to prepare this report which scrutinizes the US Department of Energy`s (DOE) plans for transportation of high-level radioactive waste to the proposed yucca Mountain repository, which reviews the regulatory structure under which shipments to a repository would be made and which presents NWPO`s plans for addressing high-level radioactive waste transportation issues. The report is divided into three major sections. Section 1.0 provides a review of DOE`s statutory requirements, its repository transportation program and plans, the major policy, programmatic, technical and institutional issues and specific areas of concern for the State of Nevada. Section 2.0 contains a description of the current federal, state and tribal transportation regulatory environment within which nuclear waste is shipped and a discussion of regulatory issues which must be resolved in order for the State to minimize risks and adverse impacts to its citizens. Section 3.0 contains the NWPO plan for the study and management of repository-related transportation. The plan addresses four areas, including policy and program management, regulatory studies, technical reviews and studies and institutional relationships. A fourth section provides recommendations for consideration by State and local officials which would assist the State in meeting the objectives of the plan.

  3. A report on high-level nuclear waste transportation: Prepared pursuant to assembly concurrent resolution No. 8 of the 1987 Nevada Legislature

    International Nuclear Information System (INIS)

    1988-12-01

    This report has been prepared by the staff of the State of Nevada Agency for Nuclear Projects/Nuclear Waste Project Office (NWPO) in response to Assembly Concurrent Resolution No. 8 (ACR 8), passed by the Nevada State Legislature in 1987. ACR 8 directed the NWPO, in cooperation with affected local governments and the Legislative committee on High-Level Radioactive Waste, to prepare this report which scrutinizes the US Department of Energy's (DOE) plans for transportation of high-level radioactive waste to the proposed yucca Mountain repository, which reviews the regulatory structure under which shipments to a repository would be made and which presents NWPO's plans for addressing high-level radioactive waste transportation issues. The report is divided into three major sections. Section 1.0 provides a review of DOE's statutory requirements, its repository transportation program and plans, the major policy, programmatic, technical and institutional issues and specific areas of concern for the State of Nevada. Section 2.0 contains a description of the current federal, state and tribal transportation regulatory environment within which nuclear waste is shipped and a discussion of regulatory issues which must be resolved in order for the State to minimize risks and adverse impacts to its citizens. Section 3.0 contains the NWPO plan for the study and management of repository-related transportation. The plan addresses four areas, including policy and program management, regulatory studies, technical reviews and studies and institutional relationships. A fourth section provides recommendations for consideration by State and local officials which would assist the State in meeting the objectives of the plan

  4. Scenario for concurrent conceptual assembly line design: A case study

    Science.gov (United States)

    Mas, F.; Ríos, J.; Menéndez, J. L.

    2012-04-01

    The decision to design and build a new aircraft is preceded by years of research and study. Different disciplines work together throughout the lifecycle to ensure not only a complete functional definition of the product, but also a complete industrialization, a marketing plan, a maintenance plan, etc. This case study focuses on the conceptual design phase. During this phase, the design solutions that will meet the functional and industrial requirements are defined, i.e.: the basic requirements of industrialization. During this phase, several alternatives are studied, and the most attractive in terms of performance and cost requirements is selected. As a result of the study of these alternatives, it is possible to define an early conceptual design of the assembly line and its basic parameters. The plant needs, long cycle jigs & tools or industrial means and human resources with the necessary skills can be determined in advance.

  5. Adaptive resolution simulation of supramolecular water : The concurrent making, breaking, and remaking of water bundles

    NARCIS (Netherlands)

    Zavadlav, Julija; Marrink, Siewert J; Praprotnik, Matej

    The adaptive resolution scheme (AdResS) is a multiscale molecular dynamics simulation approach that can concurrently couple atomistic (AT) and coarse-grained (CG) resolution regions, i.e., the molecules can freely adapt their resolution according to their current position in the system. Coupling to

  6. Improving depth resolutions in positron beam spectroscopy by concurrent ion-beam sputtering

    Science.gov (United States)

    John, Marco; Dalla, Ayham; Ibrahim, Alaa M.; Anwand, Wolfgang; Wagner, Andreas; Böttger, Roman; Krause-Rehberg, Reinhard

    2018-05-01

    The depth resolution of mono-energetic positron annihilation spectroscopy using a positron beam is shown to improve by concurrently removing the sample surface layer during positron beam spectroscopy. During ion-beam sputtering with argon ions, Doppler-broadening spectroscopy is performed with energies ranging from 3 keV to 5 keV allowing for high-resolution defect studies just below the sputtered surface. With this technique, significantly improved depth resolutions could be obtained even at larger depths when compared to standard positron beam experiments which suffer from extended positron implantation profiles at higher positron energies. Our results show that it is possible to investigate layered structures with a thickness of about 4 microns with significantly improved depth resolution. We demonstrated that a purposely generated ion-beam induced defect profile in a silicon sample could be resolved employing the new technique. A depth resolution of less than 100 nm could be reached.

  7. Investigating the Effects of Concurrent Performance of Physical and Cognitive Demanding Task in Paced Assembly Lines

    Directory of Open Access Journals (Sweden)

    Shakil Ahmed Shaikh

    2013-07-01

    Full Text Available The study was undertaken to investigate the effects of pacing on aspects of performance at an assembly task and on the operators' responses related to work behaviour, perceived workload and perceived stress. A particular objective of the study was to investigate whether physical and cognitive demands may interact in their influences on these effects. An assembly task was simulated in the laboratory and the level of pacing imposed, work height and memory load within the task were all varied. The results showed that the type of pacing commonly imposed (as is common with a lean manufacturing Takt time system in industry can significantly affect both performance and perceived workload and stress. Physical demands (through work height affecting posture and mental demand (through memory load were also found to have significant effects, as would be expected from the many studies of these in the literature. More importantly, some interactions were found between pacing and work height in their effects on quality of assembly and the operator's own rating of performance, and between work height and memory load in their effects on errors. These findings will need to be taken into account by companies when implementing Takt time systems.

  8. Concurrent resolution of chronic diarrhea likely due to Crohn's disease and infection with Mycobacterium avium paratuberculosis

    Directory of Open Access Journals (Sweden)

    Shoor Vir Singh

    2016-10-01

    Full Text Available Examination of samples of stool from a 61 year old male patient, presenting with the clinical symptoms of Crohn’s disease (CD, revealed massive shedding of acid fast bacilli with the morphology of Mycobacterium avium paratuberculosis (MAP, the causative agent of Johne’s disease in cattle. MAP was cultured from the stool. Biotyping of the bacterium isolated from cultures of stool demonstrated it was the Indian Bison biotype of MAP, the dominant biotype infecting livestock and humans in India. Based on this finding and because the patient was unresponsive to standard therapy used in India to treat patients with gastrointestinal inflammatory disorders, the patient was placed on a regimen of multi-antibiotic therapy, currently used to treat tuberculosis and CD. After one year of treatment, the patient’s health was restored, concurrent with cessation of shedding of MAP in his stool. This patient is the first case shown to shed MAP from the stool who was cured of infection with antibiotics and who was concurrently cured of clinical signs of CD.

  9. Embracing concurrent realities: Revisiting the relationship between human rights and conflict resolution

    NARCIS (Netherlands)

    Parlevliet, M.B.

    2015-01-01

    This study focuses on the interplay of human rights and conflict resolution in the practice of civil society organisations and independent state institutions, to enhance understanding of the relationship between these fields and contribute to improved practice. While it has been recognised for some

  10. Localization of adenovirus morphogenesis players, together with visualization of assembly intermediates and failed products, favor a model where assembly and packaging occur concurrently at the periphery of the replication center.

    Directory of Open Access Journals (Sweden)

    Gabriela N Condezo

    2017-04-01

    Full Text Available Adenovirus (AdV morphogenesis is a complex process, many aspects of which remain unclear. In particular, it is not settled where in the nucleus assembly and packaging occur, and whether these processes occur in a sequential or a concerted manner. Here we use immunofluorescence and immunoelectron microscopy (immunoEM to trace packaging factors and structural proteins at late times post infection by either wildtype virus or a delayed packaging mutant. We show that representatives of all assembly factors are present in the previously recognized peripheral replicative zone, which therefore is the AdV assembly factory. Assembly intermediates and abortive products observed in this region favor a concurrent assembly and packaging model comprising two pathways, one for capsid proteins and another one for core components. Only when both pathways are coupled by correct interaction between packaging proteins and the genome is the viral particle produced. Decoupling generates accumulation of empty capsids and unpackaged cores.

  11. Development of high resolution x-ray CT technique for irradiated fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Ishimi, Akihiro; Katsuyama, Kozo; Maeda, Koji; Asaga, Takeo [Japan Atomic Energy Agency, Oarai Research and Development Center, Oarai, Ibaraki (Japan)

    2012-03-15

    High X-ray CT technique was developed to observe the irradiation performance of FBR fuel assembly and MOX fuel. In this technique, the high energy X-ray pulse (12MeV) was used synchronizing detection system with the X-ray pulse to reduce the effect of the gamma ray emissions from the irradiated fuel assembly. In this study, this technique was upgraded to obtain high resolution X-ray CT image. In this upgrading, the collimator which had slit width of 0.1 mm and X-ray detector of a highly sensitive silicon semiconductor detector (100 channels) was introduced in the X-ray CT system. As a result of these developments, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assembly. (author)

  12. The Resolution of the World Health Assembly on the Elimination of Avoidable Blindness

    Directory of Open Access Journals (Sweden)

    R Pararajasegaram

    2003-01-01

    Full Text Available The word ‘resolution’, is a derivative of the French word, ‘soluere’, meaning ‘to solve’, and is defined by The Oxford Dictionary as: ‘The formal expression of opinion or intention by a legislative body or public meeting’. The Resolution on the Elimination of Avoidable Blindness adopted by the Fifty-sixth World Health Assembly meeting in Geneva on the 28 May 2003, therefore, has special significance.The Resolution was adopted by the member states unanimously and testifies first and foremost to the fact that the Right to Sight is not a contentious issue.

  13. FitEM2EM--tools for low resolution study of macromolecular assembly and dynamics.

    Directory of Open Access Journals (Sweden)

    Ziv Frankenstein

    Full Text Available Studies of the structure and dynamics of macromolecular assemblies often involve comparison of low resolution models obtained using different techniques such as electron microscopy or atomic force microscopy. We present new computational tools for comparing (matching and docking of low resolution structures, based on shape complementarity. The matched or docked objects are represented by three dimensional grids where the value of each grid point depends on its position with regard to the interior, surface or exterior of the object. The grids are correlated using fast Fourier transformations producing either matches of related objects or docking models depending on the details of the grid representations. The procedures incorporate thickening and smoothing of the surfaces of the objects which effectively compensates for differences in the resolution of the matched/docked objects, circumventing the need for resolution modification. The presented matching tool FitEM2EMin successfully fitted electron microscopy structures obtained at different resolutions, different conformers of the same structure and partial structures, ranking correct matches at the top in every case. The differences between the grid representations of the matched objects can be used to study conformation differences or to characterize the size and shape of substructures. The presented low-to-low docking tool FitEM2EMout ranked the expected models at the top.

  14. High-Resolution Spore Coat Architecture and Assembly of Bacillus Spores

    Energy Technology Data Exchange (ETDEWEB)

    Malkin, A J; Elhadj, S; Plomp, M

    2011-03-14

    Elucidating the molecular architecture of bacterial and cellular surfaces and its structural dynamics is essential to understanding mechanisms of pathogenesis, immune response, physicochemical interactions, environmental resistance, and provide the means for identifying spore formulation and processing attributes. I will discuss the application of in vitro atomic force microscopy (AFM) for studies of high-resolution coat architecture and assembly of several Bacillus spore species. We have demonstrated that bacterial spore coat structures are phylogenetically and growth medium determined. We have proposed that strikingly different species-dependent coat structures of bacterial spore species are a consequence of sporulation media-dependent nucleation and crystallization mechanisms that regulate the assembly of the outer spore coat. Spore coat layers were found to exhibit screw dislocations and two-dimensional nuclei typically observed on inorganic and macromolecular crystals. This presents the first case of non-mineral crystal growth patterns being revealed for a biological organism, which provides an unexpected example of nature exploiting fundamental materials science mechanisms for the morphogenetic control of biological ultrastructures. We have discovered and validated, distinctive formulation-specific high-resolution structural spore coat and dimensional signatures of B. anthracis spores (Sterne strain) grown in different formulation condition. We further demonstrated that measurement of the dimensional characteristics of B. anthracis spores provides formulation classification and sample matching with high sensitivity and specificity. I will present data on the development of an AFM-based immunolabeling technique for the proteomic mapping of macromolecular structures on the B. anthracis surfaces. These studies demonstrate that AFM can probe microbial surface architecture, environmental dynamics and the life cycle of bacterial and cellular systems at near

  15. Super-resolution imaging of ESCRT-proteins at HIV-1 assembly sites.

    Directory of Open Access Journals (Sweden)

    Jens Prescher

    2015-02-01

    Full Text Available The cellular endosomal sorting complex required for transport (ESCRT machinery is involved in membrane budding processes, such as multivesicular biogenesis and cytokinesis. In HIV-infected cells, HIV-1 hijacks the ESCRT machinery to drive HIV release. Early in the HIV-1 assembly process, the ESCRT-I protein Tsg101 and the ESCRT-related protein ALIX are recruited to the assembly site. Further downstream, components such as the ESCRT-III proteins CHMP4 and CHMP2 form transient membrane associated lattices, which are involved in virus-host membrane fission. Although various geometries of ESCRT-III assemblies could be observed, the actual membrane constriction and fission mechanism is not fully understood. Fission might be driven from inside the HIV-1 budding neck by narrowing the membranes from the outside by larger lattices surrounding the neck, or from within the bud. Here, we use super-resolution fluorescence microscopy to elucidate the size and structure of the ESCRT components Tsg101, ALIX, CHMP4B and CHMP2A during HIV-1 budding below the diffraction limit. To avoid the deleterious effects of using fusion proteins attached to ESCRT components, we performed measurements on the endogenous protein or, in the case of CHMP4B, constructs modified with the small HA tag. Due to the transient nature of the ESCRT interactions, the fraction of HIV-1 assembly sites with colocalizing ESCRT complexes was low (1.5%-3.4%. All colocalizing ESCRT clusters exhibited closed, circular structures with an average size (full-width at half-maximum between 45 and 60 nm or a diameter (determined using a Ripley's L-function analysis of roughly 60 to 100 nm. The size distributions for colocalizing clusters were narrower than for non-colocalizing clusters, and significantly smaller than the HIV-1 bud. Hence, our results support a membrane scission process driven by ESCRT protein assemblies inside a confined structure, such as the bud neck, rather than by large lattices

  16. Electrochemically controlled self-assembled monolayers characterized with molecular and sub-molecular resolution

    DEFF Research Database (Denmark)

    Zhang, Jingdong; Welinder, Anna Christina; Chi, Qijin

    2011-01-01

    Self-assembled organization of functional molecules on solid surfaces has developed into a powerful and sophisticated tool for surface chemistry and nanotechnology. A number of reviews on the topic have been available since the mid 1990s. This perspective article aims to focus on recent development...... structures and the experimental operating conditions. This is followed by discussion of two major high-resolution experimental methods, scanning tunnelling microscopy (STM) and single-crystal electrochemistry. In Section 3, we briefly address choice of supporting electrolytes and substrate surfaces......, we give examples of what can be offered by theoretical computations for the detailed understanding of the SAM electronic structures revealed by STM images. A brief summary of the current applications of SAMs in wiring metalloproteins, design and fabrication of sensors, and single-molecule electronics...

  17. High-resolution genetic maps of Eucalyptus improve Eucalyptus grandis genome assembly.

    Science.gov (United States)

    Bartholomé, Jérôme; Mandrou, Eric; Mabiala, André; Jenkins, Jerry; Nabihoudine, Ibouniyamine; Klopp, Christophe; Schmutz, Jeremy; Plomion, Christophe; Gion, Jean-Marc

    2015-06-01

    Genetic maps are key tools in genetic research as they constitute the framework for many applications, such as quantitative trait locus analysis, and support the assembly of genome sequences. The resequencing of the two parents of a cross between Eucalyptus urophylla and Eucalyptus grandis was used to design a single nucleotide polymorphism (SNP) array of 6000 markers evenly distributed along the E. grandis genome. The genotyping of 1025 offspring enabled the construction of two high-resolution genetic maps containing 1832 and 1773 markers with an average marker interval of 0.45 and 0.5 cM for E. grandis and E. urophylla, respectively. The comparison between genetic maps and the reference genome highlighted 85% of collinear regions. A total of 43 noncollinear regions and 13 nonsynthetic regions were detected and corrected in the new genome assembly. This improved version contains 4943 scaffolds totalling 691.3 Mb of which 88.6% were captured by the 11 chromosomes. The mapping data were also used to investigate the effect of population size and number of markers on linkage mapping accuracy. This study provides the most reliable linkage maps for Eucalyptus and version 2.0 of the E. grandis genome. © 2014 CIRAD. New Phytologist © 2014 New Phytologist Trust.

  18. A high resolution radiation hybrid map of bovine chromosome 14 identifies scaffold rearrangement in the latest bovine assembly

    Directory of Open Access Journals (Sweden)

    Wang Zhiquan

    2007-07-01

    Full Text Available Abstract Background Radiation hybrid (RH maps are considered to be a tool of choice for fine mapping closely linked loci, considering that the resolution of linkage maps is determined by the number of informative meiosis and recombination events which may require very large mapping populations. Accurately defining the marker order on chromosomes is crucial for correct identification of quantitative trait loci (QTL, haplotype map construction and refinement of candidate gene searches. Results A 12 k Radiation hybrid map of bovine chromosome 14 was constructed using 843 single nucleotide polymorphism markers. The resulting map was aligned with the latest version of the bovine assembly (Btau_3.1 as well as other previously published RH maps. The resulting map identified distinct regions on Bovine chromosome 14 where discrepancies between this RH map and the bovine assembly occur. A major region of discrepancy was found near the centromere involving the arrangement and order of the scaffolds from the assembly. The map further confirms previously published conserved synteny blocks with human chromosome 8. As well, it identifies an extra breakpoint and conserved synteny block previously undetected due to lower marker density. This conserved synteny block is in a region where markers between the RH map presented here and the latest sequence assembly are in very good agreement. Conclusion The increase of publicly available markers shifts the rate limiting step from marker discovery to the correct identification of their order for further use by the research community. This high resolution map of bovine chromosome 14 will facilitate identification of regions in the sequence assembly where additional information is required to resolve marker ordering.

  19. Fabrication of high-resolution reflective scale grating for an optical encoder using a patterned self-assembly process

    International Nuclear Information System (INIS)

    Fan, Shanjin; Jiang, Weitao; Li, Xuan; Yu, Haoyu; Lei, Biao; Shi, Yongsheng; Yin, Lei; Chen, Bangdao; Liu, Hongzhong

    2016-01-01

    Steel tape scale grating of a reflective incremental linear encoder has a key impact on the measurement accuracy of the optical encoder. However, it is difficult for conventional manufacturing processes to fabricate scale grating with high-resolution grating strips, due to process and material problems. In this paper, self-assembly technology was employed to fabricate high-resolution steel tape scale grating for a reflective incremental linear encoder. Graphene oxide nanoparticles were adopted to form anti-reflective grating strips of steel tape scale grating. They were deposited in the tape, which had a hydrophobic and hydrophilic grating pattern when the dispersion of the nanoparticles evaporated. A standard lift-off process was employed to fabricate the hydrophobic grating strips on the steel tape. Simultaneously, the steel tape itself presents a hydrophilic property. The hydrophobic and hydrophilic grating pattern was thus obtained. In this study, octafluorocyclobutane was used to prepare the hydrophobic grating strips, due to its hydrophobic property. High-resolution graphene oxide steel tape scale grating with a pitch of 20 μ m was obtained through the self-assembly process. The photoelectric signals of the optical encoder containing the graphene oxide scale grating and conventional scale grating were tested under the same conditions. Comparison test results showed that the graphene oxide scale grating has a better performance in its amplitude and harmonic components than that of the conventional steel tape scale. A comparison experiment of position errors was also conducted, demonstrating an improvement in the positioning error of the graphene oxide scale grating. The comparison results demonstrated the applicability of the proposed self-assembly process to fabricate high-resolution graphene oxide scale grating for a reflective incremental linear encoder. (paper)

  20. Concurrent Collections

    OpenAIRE

    Budimlić, Zoran; Burke, Michael; Cavé, Vincent; Knobe, Kathleen; Lowney, Geoff; Newton, Ryan; Palsberg, Jens; Peixotto, David; Sarkar, Vivek; Schlimbach, Frank; Taşırlar, Sağnak

    2010-01-01

    We introduce the Concurrent Collections (CnC) programming model. CnC supports flexible combinations of task and data parallelism while retaining determinism. CnC is implicitly parallel, with the user providing high-level operations along with semantic ordering constraints that together form a CnC graph. We formally describe the execution semantics of CnC and prove that the model guarantees deterministic computation. We evaluate the performance of CnC implementations on several applications an...

  1. The assembly, calibration, and preliminary results from the Colorado high-resolution Echelle stellar spectrograph (CHESS)

    Science.gov (United States)

    Hoadley, Keri; France, Kevin; Nell, Nicholas; Kane, Robert; Schultz, Ted; Beasley, Matthew; Green, James; Kulow, Jen; Kersgaard, Eliot; Fleming, Brian

    2014-07-01

    The Colorado High-resolution Echelle Stellar Spectrograph (CHESS) is a far ultraviolet (FUV) rocket-borne experiment designed to study the atomic-to-molecular transitions within translucent interstellar clouds. CHESS is an objective echelle spectrograph operating at f/12.4 and resolving power of 120,000 over a band pass of 100 - 160 nm. The echelle flight grating is the product of a research and development project with LightSmyth Inc. and was coated at Goddard Space Flight Center (GSFC) with Al+LiF. It has an empirically-determined groove density of 71.67 grooves/mm. At the Center for Astrophysics and Space Astronomy (CASA) at the University of Colorado (CU), we measured the efficiencies of the peak and adjacent dispersion orders throughout the 90 - 165 nm band pass to characterize the behavior of the grating for pre-flight calibrations and to assess the scattered-light behavior. The crossdispersing grating, developed and ruled by Horiba Jobin-Yvon, is a holographically-ruled, low line density (351 grooves/mm), powered optic with a toroidal surface curvature. The CHESS cross-disperser was also coated at GSFC; Cr+Al+LiF was deposited to enhance far-UV efficiency. Results from final efficiency and reflectivity measurements of both optics are presented. We utilize a cross-strip anode microchannel plate (MCP) detector built by Sensor Sciences to achieve high resolution (25 μm spatial resolution) and data collection rates (~ 106 photons/second) over a large format (40mm round, digitized to 8k x 8k) for the first time in an astronomical sounding rocket flight. The CHESS instrument was successfully launched from White Sands Missile Range on 24 May 2014. We present pre-flight sensitivity, effective area calculations, lab spectra and calibration results, and touch on first results and post-flight calibration plans.

  2. Assembly and alignment method for optimized spatial resolution of off-axis three-mirror fore optics of hyperspectral imager.

    Science.gov (United States)

    Kim, Youngsoo; Hong, Jinsuk; Choi, Byungin; Lee, Jong-Ung; Kim, Yeonsoo; Kim, Hyunsook

    2017-08-21

    A fore optics for the hyperspectral spectrometer is designed, manufactured, assembled, and aligned. The optics has a telecentric off-axis three-mirror configuration with a field of view wider than 14 degrees and an f-number as small as 2.3. The primary mirror (M1) and the secondary mirror (M2) are axially symmetric aspheric surfaces to minimize the sensitivity. The tertiary mirror (M3) is a decentered aspheric surface to minimize the coma and astigmatism aberration. The M2 also has a hole for the slit to maintain the optical performance while maximizing the telecentricity. To ensure the spatial resolution performance of the optical system, an alignment procedure is established to assemble and align the entrance slit of the spectrometer to the rear end of the fore optics. It has a great advantage to confirm and maintain the alignment integrity of the fore optics module throughout the alignment procedure. To perform the alignment procedure successfully, the precision movement control requirements are calculated and applied. As a result, the alignment goal of the RMS wave front error (WFE) to be smaller than 90 nm at all fields is achieved.

  3. Photonic nanojet super-resolution in immersed ordered assembly of dielectric microspheres

    International Nuclear Information System (INIS)

    Geints, Y.E.; Zemlyanov, A.A.

    2017-01-01

    Highlights: • Ordered microassemblies of dielectric microspheres immersed in a transparent matrix exposed to a light wave produce an array of the “photonic nanojets” coupled through the field interference. • “Photonic nanojet” parameters depend on the inter-sphere gap and immersion depth. • Sphere microassembly can produce the jets with the sub-diffraction spatial resolution if the particles are loosely packed and semi-immersed. - Abstract: Specific spatially-localized optical field structure, which is often referred to as a photonic nanojet (PNJ), is formed in the near-field scattering area of non-absorbing dielectric micron-sized particle exposed to an optical radiation. By virtue of the finite-difference time-domain technique we numerically simulate the two-dimensional array of PNJs created by an ordered single-layer microassembly of glass microspheres immersed in a transparent polymer matrix. The behavior of the main PNJ parameters (length, diameter, and intensity) is analyzed subject to the immersion depth of the microparticles and cooperative interference effects of the neighboring microspheres. We show that depending on microassembly configuration, the PNJ quality can be significantly improved; in particular, the PNJ spatial resolution better than λ/5 can be achieved.

  4. High-resolution noncontact AFM and Kelvin probe force microscopy investigations of self-assembled photovoltaic donor–acceptor dyads

    Directory of Open Access Journals (Sweden)

    Benjamin Grévin

    2016-06-01

    Full Text Available Self-assembled donor–acceptor dyads are used as model nanostructured heterojunctions for local investigations by noncontact atomic force microscopy (nc-AFM and Kelvin probe force microscopy (KPFM. With the aim to probe the photo-induced charge carrier generation, thin films deposited on transparent indium tin oxide substrates are investigated in dark conditions and upon illumination. The topographic and contact potential difference (CPD images taken under dark conditions are analysed in view of the results of complementary transmission electron microscopy (TEM experiments. After in situ annealing, it is shown that the dyads with longer donor blocks essentially lead to standing acceptor–donor lamellae, where the acceptor and donor groups are π-stacked in an edge-on configuration. The existence of strong CPD and surface photo-voltage (SPV contrasts shows that structural variations occur within the bulk of the edge-on stacks. SPV images with a very high lateral resolution are achieved, which allows for the resolution of local photo-charging contrasts at the scale of single edge-on lamella. This work paves the way for local investigations of the optoelectronic properties of donor–acceptor supramolecular architectures down to the elementary building block level.

  5. A report on high-level nuclear transportation: Prepared pursuant to assembly concurrent Resolution No. 8 of the 1987 Nevada Legislature

    International Nuclear Information System (INIS)

    1988-12-01

    The report is divided into three major sections, each of which addresses one of three directives cited above. Section 1.0 provides a review of DOE's statutory requirements, its repository transportation program and plans, the major policy, programmatic, technical and institutional issues and specific areas of concern for the State of Nevada. Section 2.0 contains a description of the current federal, state and tribal transportation regulatory environment within which nuclear waste is shipped and a discussion of regulatory issues which must be resolved in order for the State to minimize risks and adverse impacts to its citizens. Among other issues, this section addresses emergency management, liability for accidents, state permitting and fees, and consistency of State and local regulation with federal law. Section 3.0 contains the NWPO plan for the study and management of repository-related transporation. The plan addresses four areas, including policy and program management, regulatory studies, technical reviews and studies and institutional relationships. A fourth section provides recommendations for consideration by State and local officials which would assist the State in meeting the objectives of the plan

  6. High-resolution simulations of the final assembly of Earth-like planets. 2. Water delivery and planetary habitability.

    Science.gov (United States)

    Raymond, Sean N; Quinn, Thomas; Lunine, Jonathan I

    2007-02-01

    The water content and habitability of terrestrial planets are determined during their final assembly, from perhaps 100 1,000-km "planetary embryos " and a swarm of billions of 1-10-km "planetesimals. " During this process, we assume that water-rich material is accreted by terrestrial planets via impacts of water-rich bodies that originate in the outer asteroid region. We present analysis of water delivery and planetary habitability in five high-resolution simulations containing about 10 times more particles than in previous simulations. These simulations formed 15 terrestrial planets from 0.4 to 2.6 Earth masses, including five planets in the habitable zone. Every planet from each simulation accreted at least the Earth's current water budget; most accreted several times that amount (assuming no impact depletion). Each planet accreted at least five water-rich embryos and planetesimals from the past 2.5 astronomical units; most accreted 10-20 water-rich bodies. We present a new model for water delivery to terrestrial planets in dynamically calm systems, with low-eccentricity or low-mass giant planets-such systems may be very common in the Galaxy. We suggest that water is accreted in comparable amounts from a few planetary embryos in a " hit or miss " way and from millions of planetesimals in a statistically robust process. Variations in water content are likely to be caused by fluctuations in the number of water-rich embryos accreted, as well as from systematic effects, such as planetary mass and location, and giant planet properties.

  7. Forty Years of the United Nations General Assembly Resolution 3379 (XXX) on Zionism and Racism: the Brazilian Vote as an instance of United States - Brazil Relations

    OpenAIRE

    SANTOS, NORMA BREDA DOS; UZIEL, EDUARDO

    2015-01-01

    Abstract In 1975, Brazil voted in favor of the United Nations General Assembly resolution 3379 (XXX), equating Zionism with a form of racism. Focusing on the decision-making process of president Ernesto Geisel's (1974-1979) foreign policy, "responsible pragmatism", this article discusses how the ultimate decision to vote in favor of resolution was taken taking into account mainly US-Brazil relationship. Resumo Em 1975, o Brasil votou a favor da resolução da Assembleia Geral das Nações Unid...

  8. Discovery, genotyping and characterization of structural variation and novel sequence at single nucleotide resolution from de novo genome assemblies on a population scale

    DEFF Research Database (Denmark)

    Liu, Siyang; Huang, Shujia; Rao, Junhua

    2015-01-01

    present a novel approach implemented in a single software package, AsmVar, to discover, genotype and characterize different forms of structural variation and novel sequence from population-scale de novo genome assemblies up to nucleotide resolution. Application of AsmVar to several human de novo genome......) as well as large deletions. However, these approaches consistently display a substantial bias against the recovery of complex structural variants and novel sequence in individual genomes and do not provide interpretation information such as the annotation of ancestral state and formation mechanism. We...... assemblies captures a wide spectrum of structural variants and novel sequences present in the human population in high sensitivity and specificity. Our method provides a direct solution for investigating structural variants and novel sequences from de novo genome assemblies, facilitating the construction...

  9. High-speed assembly language (80386/80387) programming for laser spectra scan control and data acquisition providing improved resolution water vapor spectroscopy

    Science.gov (United States)

    Allen, Robert J.

    1988-01-01

    An assembly language program using the Intel 80386 CPU and 80387 math co-processor chips was written to increase the speed of data gathering and processing, and provide control of a scanning CW ring dye laser system. This laser system is used in high resolution (better than 0.001 cm-1) water vapor spectroscopy experiments. Laser beam power is sensed at the input and output of white cells and the output of a Fabry-Perot. The assembly language subroutine is called from Basic, acquires the data and performs various calculations at rates greater than 150 faster than could be performed by the higher level language. The width of output control pulses generated in assembly language are 3 to 4 microsecs as compared to 2 to 3.7 millisecs for those generated in Basic (about 500 to 1000 times faster). Included are a block diagram and brief description of the spectroscopy experiment, a flow diagram of the Basic and assembly language programs, listing of the programs, scope photographs of the computer generated 5-volt pulses used for control and timing analysis, and representative water spectrum curves obtained using these programs.

  10. Concurrent and opposed environmental trends during the last glacial cycle between the Carpathian Basin and the Black Sea coast: evidence from high resolution enviromagnetic loess records

    Science.gov (United States)

    Hambach, Ulrich; Zeeden, Christian; Veres, Daniel; Obreht, Igor; Bösken, Janina; Marković, Slobodan B.; Eckmeier, Eileen; Fischer, Peter; Lehmkuhl, Frank

    2015-04-01

    Aeolian dust sediments (loess) are beside marine/lacustrine sediments, speleothemes and arctic ice cores the key archives for the reconstruction of the Quaternary palaeoenvironment in the Eurasian continental mid-latitudes. The Eurasian loess-belt has its western end in the Middle (Carpathian) and the Lower Danube Basin where one can find true loess plateaus dating back more than one million years and comprising a semi-continuous record of Pleistocene environmental change. The loess-palaeosol sequences (LPSS) of the region allow inter-regional and trans-regional comparison and, even more importantly, the analysis of temporal and spatial trends in Pleistocene environments, even on a hemispheric scale. However, the general temporal resolution of the LPSS seems mostly limited to the orbital scale patterns, enabling the general comparision of their well documented palaeoclimate record to the marine isotope stages (MIS) and thus to the course of the global ice volume with time. Following the widespread conventional wisdom in loess research, cold and more importantly dry conditions are generally assumed to lead to relatively high accumulation rates of loess, whereas during warmer and more humid environmental conditions the vegetation cover prevents ablation and clastic silt production. Moreover, synsedimentary pedogenesis prevails and hence, (embryonic) soils are formed which are rapidly buried by loess as soon as the climate returns to drier conditions. In the last decades, mineral magnetic parameters became fundamental palaeoclimate proxies in loess research. The magnetic susceptibility (χ) and its dependence on the frequency of the applied field (χfd) turned out to be beside grain size and geochemical indices a highly sensitive proxy especially for soil humidity during loess accumulation. Here we present the first results of an ongoing study on two Late Pleistocene LPSS from the southern Carpathian Basin (Titel-Plateau, Vojvodina, Serbia) and the eastern Lower

  11. Concurrent weighted logic

    DEFF Research Database (Denmark)

    Xue, Bingtian; Larsen, Kim Guldstrand; Mardare, Radu Iulian

    2015-01-01

    We introduce Concurrent Weighted Logic (CWL), a multimodal logic for concurrent labeled weighted transition systems (LWSs). The synchronization of LWSs is described using dedicated functions that, in various concurrency paradigms, allow us to encode the compositionality of LWSs. To reflect these......-completeness results for this logic. To complete these proofs we involve advanced topological techniques from Model Theory....

  12. Structural variation in two human genomes mapped at single-nucleotide resolution by whole genome de novo assembly

    DEFF Research Database (Denmark)

    Li, Yingrui; Zheng, Hancheng; Luo, Ruibang

    2011-01-01

    Here we use whole-genome de novo assembly of second-generation sequencing reads to map structural variation (SV) in an Asian genome and an African genome. Our approach identifies small- and intermediate-size homozygous variants (1-50 kb) including insertions, deletions, inversions and their precise...

  13. Construction of high resolution genetic linkage maps to improve the soybean genome sequence assembly Glyma1.01

    Science.gov (United States)

    A landmark in soybean research, Glyma1.01, the first whole genome sequence of variety Williams 82 (Glycine max L. Merr.) was completed in 2010 and is widely used. However, because the assembly was primarily built based on the linkage maps constructed with a limited number of markers and recombinant...

  14. Measuring and modelling concurrency

    Science.gov (United States)

    Sawers, Larry

    2013-01-01

    This article explores three critical topics discussed in the recent debate over concurrency (overlapping sexual partnerships): measurement of the prevalence of concurrency, mathematical modelling of concurrency and HIV epidemic dynamics, and measuring the correlation between HIV and concurrency. The focus of the article is the concurrency hypothesis – the proposition that presumed high prevalence of concurrency explains sub-Saharan Africa's exceptionally high HIV prevalence. Recent surveys using improved questionnaire design show reported concurrency ranging from 0.8% to 7.6% in the region. Even after adjusting for plausible levels of reporting errors, appropriately parameterized sexual network models of HIV epidemics do not generate sustainable epidemic trajectories (avoid epidemic extinction) at levels of concurrency found in recent surveys in sub-Saharan Africa. Efforts to support the concurrency hypothesis with a statistical correlation between HIV incidence and concurrency prevalence are not yet successful. Two decades of efforts to find evidence in support of the concurrency hypothesis have failed to build a convincing case. PMID:23406964

  15. Multi-resolution and multi-scale simulation of the thermal hydraulics in fast neutron reactor assemblies

    International Nuclear Information System (INIS)

    Angeli, P.-E.

    2011-01-01

    The present work is devoted to a multi-scale numerical simulation of an assembly of fast neutron reactor. In spite of the rapid growth of the computer power, the fine complete CFD of a such system remains out of reach in a context of research and development. After the determination of the thermalhydraulic behaviour of the assembly at the macroscopic scale, we propose to carry out a local reconstruction of the fine scale information. The complete approach will require a much lower CPU time than the CFD of the entire structure. The macro-scale description is obtained using either the volume averaging formalism in porous media, or an alternative modeling historically developed for the study of fast neutron reactor assemblies. It provides some information used as constraint of a down-scaling problem, through a penalization technique of the local conservation equations. This problem lean on the periodic nature of the structure by integrating periodic boundary conditions for the required microscale fields or their spatial deviation. After validating the methodologies on some model applications, we undertake to perform them on 'industrial' configurations which demonstrate the viability of this multi-scale approach. (author) [fr

  16. Generalization of concurrence vectors

    International Nuclear Information System (INIS)

    Yu Changshui; Song Heshan

    2004-01-01

    In this Letter, based on the generalization of concurrence vectors for bipartite pure state with respect to employing tensor product of generators of the corresponding rotation groups, we generalize concurrence vectors to the case of mixed states; a new criterion of separability of multipartite pure states is given out, for which we define a concurrence vector; we generalize the vector to the case of multipartite mixed state and give out a good measure of free entanglement

  17. Temporal Concurrent Constraint Programming

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Valencia Posso, Frank Dan

    2002-01-01

    The ntcc calculus is a model of non-deterministic temporal concurrent constraint programming. In this paper we study behavioral notions for this calculus. In the underlying computational model, concurrent constraint processes are executed in discrete time intervals. The behavioral notions studied...... reflect the reactive interactions between concurrent constraint processes and their environment, as well as internal interactions between individual processes. Relationships between the suggested notions are studied, and they are all proved to be decidable for a substantial fragment of the calculus...

  18. Building Safe Concurrency Abstractions

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    2014-01-01

    Concurrent object-oriented programming in Beta is based on semaphores and coroutines and the ability to define high-level concurrency abstractions like monitors, and rendezvous-based communication, and their associated schedulers. The coroutine mechanism of SIMULA has been generalized into the no......Concurrent object-oriented programming in Beta is based on semaphores and coroutines and the ability to define high-level concurrency abstractions like monitors, and rendezvous-based communication, and their associated schedulers. The coroutine mechanism of SIMULA has been generalized...

  19. Temporal Concurrent Constraint Programming

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Palamidessi, Catuscia; Valencia, Frank Dan

    2002-01-01

    The ntcc calculus is a model of non-deterministic temporal concurrent constraint programming. In this paper we study behavioral notions for this calculus. In the underlying computational model, concurrent constraint processes are executed in discrete time intervals. The behavioral notions studied...

  20. Impredicative concurrent abstract predicates

    DEFF Research Database (Denmark)

    Svendsen, Kasper; Birkedal, Lars

    2014-01-01

    We present impredicative concurrent abstract predicates { iCAP { a program logic for modular reasoning about concurrent, higher- order, reentrant, imperative code. Building on earlier work, iCAP uses protocols to reason about shared mutable state. A key novel feature of iCAP is the ability to dene...

  1. Subtle spectral effects accompanying the assembly of bacteriochlorophylls into cyclic light harvesting complexes revealed by high-resolution fluorescence spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Rätsep, Margus, E-mail: margus.ratsep@ut.ee; Pajusalu, Mihkel, E-mail: mihkel.pajusalu@ut.ee; Linnanto, Juha Matti, E-mail: juha.matti.linnanto@ut.ee [Institute of Physics, University of Tartu, Riia 142, 51014 Tartu (Estonia); Freiberg, Arvi, E-mail: arvi.freiberg@ut.ee [Institute of Physics, University of Tartu, Riia 142, 51014 Tartu, Estonia and Institute of Molecular and Cell Biology, University of Tartu, Riia 23, 51010 Tartu (Estonia)

    2014-10-21

    We have observed that an assembly of the bacteriochloropyll a molecules into B850 and B875 groups of cyclic bacterial light-harvesting complexes LH2 and LH1, respectively, results an almost total loss of the intra-molecular vibronic structure in the fluorescence spectrum, and simultaneously, an essential enhancement of its phonon sideband due to electron-phonon coupling. While the suppression of the vibronic coupling in delocalized (excitonic) molecular systems is predictable, as also confirmed by our model calculations, a boost of the electron-phonon coupling is rather unexpected. The latter phenomenon is explained by exciton self-trapping, promoted by mixing the molecular exciton states with charge transfer states between the adjacent chromophores in the tightly packed B850 and B875 arrangements. Similar, although less dramatic trends were noted for the light-harvesting complexes containing chlorophyll pigments.

  2. Automata and concurrency

    Energy Technology Data Exchange (ETDEWEB)

    Priese, L

    1983-07-01

    The author presents a precise notion of a realization (or simulation) of one concurrent system by another, and studies the relations of modular concurrent systems and non-persistent (i.e. With conflicts) concurrent systems in an automata theoretical style. He introduces a conception of realization that obeys three requirements: it allows for proper hierarchies in certain classes of concurrent systems; it allows for normal-form theorems, and the standard constructions of the literature remain realizations in formal concept; and it clarifies some counterintuitive examples. Further, although this realization conception is developed to translate the computational aspects of concurrent systems, it also gives a formal tool for the handling of synchronization problems. 38 references.

  3. Modeling the Self-assembly and Stability of DHPC Micelles using Atomic Resolution and Coarse Grained MD Simulations

    DEFF Research Database (Denmark)

    Kraft, Johan Frederik; Vestergaard, Mikkel; Schiøtt, Birgit

    2012-01-01

    Membrane mimics such as micelles and bicelles are widely used in experiments involving membrane proteins. With the aim of being able to carry out molecular dynamics simulations in environments comparable to experimental conditions, we set out to test the ability of both coarse grained and atomistic...... resolution force fields to model the experimentally observed behavior of the lipid 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC), which is a widely used lipid for biophysical characterization of membrane proteins. It becomes clear from our results that a satisfactory modeling of DHPC aggregates...

  4. Design of UHV chamber assembly and mirror mounts for high resolution VUV beam line at INDUS-1

    International Nuclear Information System (INIS)

    Saksena, G.D.; Sinha, A.K.; Bhattacharya, S.S.

    1993-01-01

    The reflecting optical system is designed for the high resolution VUV spectroscopy facility to be installed at INDUS-1. The fore-optics system consists of three cylindrical mirrors (M1, M2 and M3) to accept a 60 mrad (horizontal) x 6 mrad (vertical) diverging synchrotron beam from the storage ring in order to focus the image on the entrance slit of the vacuum spectrometer located at 13 m from the source point. In this paper we present some important details regarding mechanical design of the high resolution beam line consisting of mirror mounts, UHV chambers, associated mechanisms and beam pipes. The mirrors are mounted in an adjustable three point kinematic holder. In addition, these mounts are provided with a multi-plane alignment provision. Mirror mounts are placed inside VHV chambers which are provided with three translational and two rotational movements to facilitate initial as well as final on-line fine-tuned alignments. Beam pipes are connected to the VHV chambers through flanged bellows. Chambers, associated mechanisms, beam pipes with its non-rigid support and related pumping stations are positioned in the support structure rigidly. (author). 2 figs

  5. Atomic-Resolution Transmission Electron Microscopic Movies for Study of Organic Molecules, Assemblies, and Reactions: The First 10 Years of Development.

    Science.gov (United States)

    Nakamura, Eiichi

    2017-06-20

    A molecule is a quantum mechanical entity. "Watching motions and reactions of a molecule with our eyes" has therefore been a dream of chemists for a century. This dream has come true with the aid of the movies of atomic-resolution transmission electron microscopic (AR-TEM) molecular images through real-time observation of dynamic motions of single organic molecules (denoted hereafter as single-molecule atomic-resolution real-time (SMART) TEM imaging). Since 2007, we have reported movies of a variety of single organic molecules, organometallic molecules, and their assemblies, which are rotating, stretching, and reacting. Like movies in the theater, the atomic-resolution molecular movies provide us information on the 3-D structures of the molecules and also their time evolution. The success of the SMART-TEM imaging crucially depends on the development of "chemical fishhooks" with which fish (organic molecules) in solution can be captured on a single-walled carbon nanotube (CNT, serving as a "fishing rod"). The captured molecules are connected to a slowly vibrating CNT, and their motions are displayed on a monitor in real time. A "fishing line" connecting the fish and the rod may be a σ-bond, a van der Waals force, or other weak connections. Here, the molecule/CNT system behaves as a coupled oscillator, where the low-frequency anisotropic vibration of the CNT is transmitted to the molecules via the weak chemical connections that act as an energy filter. Interpretation of the observed motions of the molecules at atomic resolution needs us to consider the quantum mechanical nature of electrons as well as bond rotation, letting us deviate from the conventional statistical world of chemistry. What new horizons can we explore? We have so far carried out conformational studies of individual molecules, assigning anti or gauche conformations to each C-C bond in conformers that we saw. We can also determine the structures of van der Waals assemblies of organic molecules

  6. Channel's Concurrence and Quantum Teleportation

    Institute of Scientific and Technical Information of China (English)

    LING Yin-Sheng

    2005-01-01

    Concurrence can measure the entanglement property of a system. If the channel is a pure state, positive concurrence state can afford the good performance in the teleportation process. If the channel ia a mixed state, positive concurrence state cannot assure the good performance in the teleportation. The conditions of the positive concurrence and the quantum teleportation in the Heisenberg spin ring is derived.

  7. Algebraic topology and concurrency

    DEFF Research Database (Denmark)

    Fajstrup, Lisbeth; Raussen, Martin; Goubault, Eric

    2006-01-01

    We show in this article that some concepts from homotopy theory, in algebraic topology,are relevant for studying concurrent programs. We exhibit a natural semantics of semaphore programs, based on partially ordered topological spaces, which are studied up to “elastic deformation” or homotopy...... differences between ordinary and directed homotopy through examples. We also relate the topological view to a combinatorial view of concurrent programs closer to transition systems, through the notion of a cubical set. Finally we apply some of these concepts to the proof of the safeness of a two...

  8. A Concurrent Logical Relation

    DEFF Research Database (Denmark)

    Birkedal, Lars; Sieczkowski, Filip; Thamsborg, Jacob Junker

    2012-01-01

    We present a logical relation for showing the correctness of program transformations based on a new type-and-effect system for a concurrent extension of an ML-like language with higher-order functions, higher-order store and dynamic memory allocation. We show how to use our model to verify a number....... To the best of our knowledge, this is the first such result for a concurrent higher-order language with higher-order store and dynamic memory allocation....

  9. Gap Resolution

    Energy Technology Data Exchange (ETDEWEB)

    2017-04-25

    Gap Resolution is a software package that was developed to improve Newbler genome assemblies by automating the closure of sequence gaps caused by repetitive regions in the DNA. This is done by performing the follow steps:1) Identify and distribute the data for each gap in sub-projects. 2) Assemble the data associated with each sub-project using a secondary assembler, such as Newbler or PGA. 3) Determine if any gaps are closed after reassembly, and either design fakes (consensus of closed gap) for those that closed or lab experiments for those that require additional data. The software requires as input a genome assembly produce by the Newbler assembler provided by Roche and 454 data containing paired-end reads.

  10. Coalgebra, concurrency and control

    NARCIS (Netherlands)

    J.J.M.M. Rutten (Jan)

    1999-01-01

    textabstractCoalgebra is used to generalize notions and techniques from concurrency theory, in order to apply them to problems concerning the supervisory control of discrete event systems. The main ingredients of this approach are the characterization of controllability in terms of (a variant of)

  11. Correctness of concurrent processes

    NARCIS (Netherlands)

    E.R. Olderog (Ernst-Rüdiger)

    1989-01-01

    textabstractA new notion of correctness for concurrent processes is introduced and investigated. It is a relationship P sat S between process terms P built up from operators of CCS [Mi 80], CSP [Ho 85] and COSY [LTS 79] and logical formulas S specifying sets of finite communication sequences as in

  12. Concurrent credit portfolio losses.

    Science.gov (United States)

    Sicking, Joachim; Guhr, Thomas; Schäfer, Rudi

    2018-01-01

    We consider the problem of concurrent portfolio losses in two non-overlapping credit portfolios. In order to explore the full statistical dependence structure of such portfolio losses, we estimate their empirical pairwise copulas. Instead of a Gaussian dependence, we typically find a strong asymmetry in the copulas. Concurrent large portfolio losses are much more likely than small ones. Studying the dependences of these losses as a function of portfolio size, we moreover reveal that not only large portfolios of thousands of contracts, but also medium-sized and small ones with only a few dozens of contracts exhibit notable portfolio loss correlations. Anticipated idiosyncratic effects turn out to be negligible. These are troublesome insights not only for investors in structured fixed-income products, but particularly for the stability of the financial sector. JEL codes: C32, F34, G21, G32, H81.

  13. Temporal Concurrent Constraint Programming

    DEFF Research Database (Denmark)

    Valencia, Frank Dan

    Concurrent constraint programming (ccp) is a formalism for concurrency in which agents interact with one another by telling (adding) and asking (reading) information in a shared medium. Temporal ccp extends ccp by allowing agents to be constrained by time conditions. This dissertation studies...... temporal ccp by developing a process calculus called ntcc. The ntcc calculus generalizes the tcc model, the latter being a temporal ccp model for deterministic and synchronouss timed reactive systems. The calculus is built upon few basic ideas but it captures several aspects of timed systems. As tcc, ntcc...... structures, robotic devises, multi-agent systems and music applications. The calculus is provided with a denotational semantics that captures the reactive computations of processes in the presence of arbitrary environments. The denotation is proven to be fully-abstract for a substantial fragment...

  14. S. Con. Res. 148: concurrent resolution expressing the sense of congress concerning the nuclear disaster at Chernobyl in the Soviet Union. Introduced in the Senate of the United States, Ninety-Ninth Congress, Second Session, June 13, 1986

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    The resolution expresses Congressional concern over the nuclear disaster at Chernobyl, particularly in the area of loss of food and livestock in the area affected by the accident. Noting the US tradition and capacity to provide food assistance, the resolution calls upon the Agriculture Secretary to promote and assist the commercial sale of live dairy cows and dairy beef products to foreign countries

  15. Concurrent radiotherapy and chemotherapy

    International Nuclear Information System (INIS)

    Fu, K.K.

    1985-01-01

    The principal objective of combining chemotherapy with radiotherapy (XRT) for the treatment of advanced head and neck cancer is to improve the therapeutic ratio through the enhancement of local control and reduction of distant metastases without excessively enhancing normal tissue effects. Improved tumour control can result from sole additivity of either therapy or direct interactions between drug and radiation leading to increased tumour cell kill. Chemotherapy may sensitize the cells to radiation, interfere with repair of sublethal or potentially lethal radiation damage, induce cell synchrony, and reduce tumour mass leading to reoxygenation and decreased fraction of resistant hypoxic cells. Radiation may improve drug accessibility to tumour cells and reduce tumour volume leading to increased cell proliferation and chemosensitivity. If the enhanced effects of combined therapy are purely additive, then the two modalities can be administered either sequentially or concurrently with the same results. However, if the enhanced effects result from the direct interaction between drug and radiation, it is necessary that the two modalities be administered concurrently and in close temporal proximity. This review summarizes the results of clinical studies in which chemotherapy was administered concurrently during the course of radiotherapy for patients with previously untreated advanced squamous cell carcinoma in the head and neck

  16. Concurrency in product realization

    Science.gov (United States)

    Kelly, Michael J.

    1994-03-01

    Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.

  17. Domain Theory for Concurrency

    DEFF Research Database (Denmark)

    Nygaard, Mikkel

    and associated comonads, it highlights the role of linearity in concurrent computation. Two choices of comonad yield two expressive metalanguages for higher-order processes, both arising from canonical constructions in the model. Their denotational semantics are fully abstract with respect to contextual...... equivalence. One language, called HOPLA for Higher-Order Process LAnguage, derives from an exponential of linear logic. It can be viewed as an extension of the simply-typed lambda calculus with CCS-like nondeterministic sum and prefix operations, in which types express the form of computation path of which...

  18. Mastering concurrency in Go

    CERN Document Server

    Kozyra, Nathan

    2014-01-01

    A practical approach covering everything you need to know to get up and running with Go, starting with the basics and imparting increasingly more detail as the examples and topics become more complicated. The book utilizes a casual, conversational style, rife with actual code and historical anecdotes for perspective, as well as usable and extensible example applications. This book is intended for systems developers and programmers with some experience in either Go and/or concurrent programming who wish to become fluent in building high-performance applications that scale by leveraging single-c

  19. Morse Theory and Concurrency

    DEFF Research Database (Denmark)

    Wisniewski, Rafal

    2003-01-01

    The work is intended to provide some insight about concurrency theory using ideas from geometry and algebraic topology. We define a topological space containing all traces of execution of the computer program and the information about how time flows. This is the main difference with standard...... topological reasoning in which there is no information about relation "in time" among points. The main task is to define equivalence of paths reflecting execution of a program. We use the notion of homotopy history equivalence relation. The model space considered in this work is a differentiable manifold...

  20. Rethinking serializable multiversion concurrency control

    OpenAIRE

    Faleiro, Jose M.; Abadi, Daniel J.

    2014-01-01

    Multi-versioned database systems have the potential to significantly increase the amount of concurrency in transaction processing because they can avoid read-write conflicts. Unfortunately, the increase in concurrency usually comes at the cost of transaction serializability. If a database user requests full serializability, modern multi-versioned systems significantly constrain read-write concurrency among conflicting transactions and employ expensive synchronization patterns in their design....

  1. Quantify entanglement by concurrence hierarchy

    OpenAIRE

    Fan, Heng; Matsumoto, Keiji; Imai, Hiroshi

    2002-01-01

    We define the concurrence hierarchy as d-1 independent invariants under local unitary transformations in d-level quantum system. The first one is the original concurrence defined by Wootters et al in 2-level quantum system and generalized to d-level pure quantum states case. We propose to use this concurrence hierarchy as measurement of entanglement. This measurement does not increase under local quantum operations and classical communication.

  2. Concurrent Models for Object Execution

    OpenAIRE

    Diertens, Bob

    2012-01-01

    In previous work we developed a framework of computational models for the concurrent execution of functions on different levels of abstraction. It shows that the traditional sequential execution of function is just a possible implementation of an abstract computational model that allows for the concurrent execution of functions. We use this framework as base for the development of abstract computational models that allow for the concurrent execution of objects.

  3. Economic explanations for concurrent sourcing

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    2010-01-01

    Concurrent sourcing is a phenomenon where firms simultaneously make and buy the same good, i.e. they simultaneously use the governance modes of market and hierarchy. Though concurrent sourcing seems to be widespread, few studies of sourcing have focused on this phenomenon. This paper reviews...... different economic explanations for why firms use concurrent sourcing. The distinctive features of the explanations are compared, and it is discussed how they may serve as a springboard for research on concurrent sourcing. Managerial implications are also offered....

  4. Concurrency Control for Transactional Drago

    OpenAIRE

    Patiño-Martinez, Marta; Jiménez-Peris, Ricardo; Kienzle, Jörg; Arévalo, Sergio

    2002-01-01

    The granularity of concurrency control has a big impact on the performance of transactional systems. Concurrency control granu- larity and data granularity (data size) are usually the same. The e ect of this coupling is that if a coarse granularity is used, the overhead of data access (number of disk accesses) is reduced, but also the degree of concurrency. On the other hand, if a ne granularity is chosen to achieve a higher degree of concurrency (there are less con icts), the cost of data ac...

  5. A concurrent optimization model for supplier selection with fuzzy quality loss

    International Nuclear Information System (INIS)

    Rosyidi, C.; Murtisari, R.; Jauhari, W.

    2017-01-01

    The purpose of this research is to develop a concurrent supplier selection model to minimize the purchasing cost and fuzzy quality loss considering process capability and assembled product specification. Design/methodology/approach: This research integrates fuzzy quality loss in the model to concurrently solve the decision making in detailed design stage and manufacturing stage. Findings: The resulted model can be used to concurrently select the optimal supplier and determine the tolerance of the components. The model balances the purchasing cost and fuzzy quality loss. Originality/value: An assembled product consists of many components which must be purchased from the suppliers. Fuzzy quality loss is integrated in the supplier selection model to allow the vagueness in final assembly by grouping the assembly into several grades according to the resulted assembly tolerance.

  6. A concurrent optimization model for supplier selection with fuzzy quality loss

    Energy Technology Data Exchange (ETDEWEB)

    Rosyidi, C.; Murtisari, R.; Jauhari, W.

    2017-07-01

    The purpose of this research is to develop a concurrent supplier selection model to minimize the purchasing cost and fuzzy quality loss considering process capability and assembled product specification. Design/methodology/approach: This research integrates fuzzy quality loss in the model to concurrently solve the decision making in detailed design stage and manufacturing stage. Findings: The resulted model can be used to concurrently select the optimal supplier and determine the tolerance of the components. The model balances the purchasing cost and fuzzy quality loss. Originality/value: An assembled product consists of many components which must be purchased from the suppliers. Fuzzy quality loss is integrated in the supplier selection model to allow the vagueness in final assembly by grouping the assembly into several grades according to the resulted assembly tolerance.

  7. House passes resolution on occupation

    Index Scriptorium Estoniae

    2005-01-01

    Venemaalt Baltimaade okupeerimise tunnistamist nõudva resolutsiooni vastuvõtmisest USA Kongressi Esindajate Kojas Leedu päritolu kongressmani John Shimkuse eestvedamisel. Vt. ka resolutsiooni teksti "House Concurrent Resolution 128" lk. 14

  8. Legal content of the International Convention on the Protection of the Rights of All Migrant Workers and Members of Their Families, adopted by the united nations general assembly by resolution 45/158 of 18 December 1990.

    Directory of Open Access Journals (Sweden)

    Aurelia Álvarez Rodríguez

    2016-10-01

    Full Text Available The author makes a detailed analysis of the legal contents of the International Convention on the Protection of the Rights of all Migrant workers and their Families, adopted by the General Assembly of the United Nations in the Resolution 45/158 of December 1990. The objectives of the Convention, the personal spehere of application, the Human Rights of all migrant workers and their families wether they be regular of iregular are presented throughout the article. Finally, the practical effectiveness of the Convention is analyzed concluding with the importance of its ratification by the largest number of States possible.

  9. Measuring coherence with entanglement concurrence

    Science.gov (United States)

    Qi, Xianfei; Gao, Ting; Yan, Fengli

    2017-07-01

    Quantum coherence is a fundamental manifestation of the quantum superposition principle. Recently, Baumgratz et al (2014 Phys. Rev. Lett. 113 140401) presented a rigorous framework to quantify coherence from the view of theory of physical resource. Here we propose a new valid quantum coherence measure which is a convex roof measure, for a quantum system of arbitrary dimension, essentially using the generalized Gell-Mann matrices. Rigorous proof shows that the proposed coherence measure, coherence concurrence, fulfills all the requirements dictated by the resource theory of quantum coherence measures. Moreover, strong links between the resource frameworks of coherence concurrence and entanglement concurrence is derived, which shows that any degree of coherence with respect to some reference basis can be converted to entanglement via incoherent operations. Our work provides a clear quantitative and operational connection between coherence and entanglement based on two kinds of concurrence. This new coherence measure, coherence concurrence, may also be beneficial to the study of quantum coherence.

  10. Concurrent LISP and its interpreter

    Energy Technology Data Exchange (ETDEWEB)

    Tabata, K; Sugimoto, S; Ohno, Y

    1981-01-01

    In the research field of artificial intelligence many languages have been developed based on LISP, such as Planner, Conniver and so on. They have been developed to give users many useful facilities, especially for describing flexible control structures. Backtracking and coroutine facilities are typical ones introduced into these languages. Compared with backtracking and coroutine facilities, multi-process description facilities are considered to be a better alternative for writing well-structured programs. This paper describes concurrent LISP, a new concurrent programming language based on LISP. Concurrent LISP is designed to provide simple and flexible facilities for multi-process description without changing the original language features of LISP. This paper also describes the concurrent LISP interpreter which has been implemented on a FACOM M-200 at the Data Processing Center of Kyoto University. 19 references.

  11. Reference Capabilities for Concurrency Control

    OpenAIRE

    Castegren, Elias; Wrigstad, Tobias

    2016-01-01

    The proliferation of shared mutable state in object-oriented programming complicates software development as two seemingly unrelated operations may interact via an alias and produce unexpected results. In concurrent programming this manifests itself as data-races. Concurrent object-oriented programming further suffers from the fact that code that warrants synchronisation cannot easily be distinguished from code that does not. The burden is placed solely on the programmer to reason ab...

  12. Concurrent engineering: effective deployment strategies

    Directory of Open Access Journals (Sweden)

    Unny Menon

    1996-12-01

    Full Text Available This paper provides a comprehensive insight into current trends and developments in Concurrent Engineering for integrated development of products and processes with the goal of completing the entire cycle in a shorter time, at lower overall cost and with fewer engineering design changes after product release. The evolution and definition of Concurrent Engineering are addressed first, followed by a concise review of the following elements of the concurrent engineering approach to product development: Concept Development: The Front-End Process, identifying Customer Needs and Quality Function Deployment, Establishing Product Specifications, Concept Selection, Product Architecture, Design for Manufacturing, Effective Rapid Prototyping, and The Economics of Product Development. An outline of a computer-based tutorial developed by the authors and other graduate students funded by NASA ( accessible via the world-wide-web . is provided in this paper. A brief discussion of teamwork for successful concurrent engineering is included, t'ase histories of concurrent engineering implementation at North American and European companies are outlined with references to textbooks authored by Professor Menon and other writers. A comprehensive bibliography on concurrent engineering is included in the paper.

  13. A gene-based high-resolution comparative radiation hybrid map as a framework for genome sequence assembly of a bovine chromosome 6 region associated with QTL for growth, body composition, and milk performance traits

    Directory of Open Access Journals (Sweden)

    Laurent Pascal

    2006-03-01

    Full Text Available Abstract Background A number of different quantitative trait loci (QTL for various phenotypic traits, including milk production, functional, and conformation traits in dairy cattle as well as growth and body composition traits in meat cattle, have been mapped consistently in the middle region of bovine chromosome 6 (BTA6. Dense genetic and physical maps and, ultimately, a fully annotated genome sequence as well as their mutual connections are required to efficiently identify genes and gene variants responsible for genetic variation of phenotypic traits. A comprehensive high-resolution gene-rich map linking densely spaced bovine markers and genes to the annotated human genome sequence is required as a framework to facilitate this approach for the region on BTA6 carrying the QTL. Results Therefore, we constructed a high-resolution radiation hybrid (RH map for the QTL containing chromosomal region of BTA6. This new RH map with a total of 234 loci including 115 genes and ESTs displays a substantial increase in loci density compared to existing physical BTA6 maps. Screening the available bovine genome sequence resources, a total of 73 loci could be assigned to sequence contigs, which were already identified as specific for BTA6. For 43 loci, corresponding sequence contigs, which were not yet placed on the bovine genome assembly, were identified. In addition, the improved potential of this high-resolution RH map for BTA6 with respect to comparative mapping was demonstrated. Mapping a large number of genes on BTA6 and cross-referencing them with map locations in corresponding syntenic multi-species chromosome segments (human, mouse, rat, dog, chicken achieved a refined accurate alignment of conserved segments and evolutionary breakpoints across the species included. Conclusion The gene-anchored high-resolution RH map (1 locus/300 kb for the targeted region of BTA6 presented here will provide a valuable platform to guide high-quality assembling and

  14. Immediate tasks in realization of 52-53 Sessions of United Nations Organization General Assembly resolution on Semipalatinsk nuclear test site

    International Nuclear Information System (INIS)

    Ibraev, S.

    2000-01-01

    The author points out, that ecological heritage of Semipalatinsk test site is not studied, scattered investigations does not give objective assessment about radiation situation in the region. Only operations of close down of wells on the base of inter-state agreement between Republic of Kazakhstan and the United States of America were carried out. There are following main rehabilitation measures on liquidation of nuclear tests consequences in the region: study, deactivation and re-cultivation of populated territories; study of radioactive contamination level in underground waters and definition radionuclides migration by biological chain for taking preventative measures. It is noted, that citizens of the region with gratitude took solution of 52-53 Sessions of United Nations Organization General Assembly 'On liquidation of nuclear tests consequences on Semipalatinsk nuclear test site

  15. Modal abstractions of concurrent behavior

    DEFF Research Database (Denmark)

    Nielson, Flemming; Nanz, Sebastian; Nielson, Hanne Riis

    2011-01-01

    We present an effective algorithm for the automatic construction of finite modal transition systems as abstractions of potentially infinite concurrent processes. Modal transition systems are recognized as valuable abstractions for model checking because they allow for the validation as well...... as refutation of safety and liveness properties. However, the algorithmic construction of finite abstractions from potentially infinite concurrent processes is a missing link that prevents their more widespread usage for model checking of concurrent systems. Our algorithm is a worklist algorithm using concepts...... from abstract interpretation and operating upon mappings from sets to intervals in order to express simultaneous over- and underapprox-imations of the multisets of process actions available in a particular state. We obtain a finite abstraction that is 3-valued in both states and transitions...

  16. Managing Complexity of Control Software through Concurrency

    NARCIS (Netherlands)

    Hilderink, G.H.

    2005-01-01

    In this thesis, we are concerned with the development of concurrent software for embedded systems. The emphasis is on the development of control software. Embedded systems are concurrent systems whereby hardware and software communicate with the concurrent world. Concurrency is essential, which

  17. Concurrency & Asynchrony in Declarative Workflows

    DEFF Research Database (Denmark)

    Debois, Søren; Hildebrandt, Thomas; Slaats, Tijs

    2015-01-01

    of concurrency in DCR Graphs admits asynchronous execution of declarative workflows both conceptually and by reporting on a prototype implementation of a distributed declarative workflow engine. Both the theoretical development and the implementation is supported by an extended example; moreover, the theoretical....... In this paper, we pro- pose a notion of concurrency for declarative process models, formulated in the context of Dynamic Condition Response (DCR) graphs, and exploiting the so-called “true concurrency” semantics of Labelled Asynchronous Transition Systems. We demonstrate how this semantic underpinning...

  18. Gamma counter shutter assembly

    International Nuclear Information System (INIS)

    Aday, R.W. Jr.; Barber, D.G.

    1976-01-01

    A shutter assembly for a radioactivity measuring apparatus is described having a sample counting chamber, the assembly having a bulky solid lead cylinder with a sample access port extending therethrough for alignment with the sample chamber. The cylinder is rotated by a Geneva wheel arrangement having a drive wheel with a plurality of equi-angularly disposed pins perpendicular to the surface thereof engaging radially extending open-ended slots in a driven wheel secured to the lead cylinder for concurrent rotation therewith. The drive wheel is rotated at a constant speed with the driven wheel accelerating as a pin traverses the slot from the open end toward the driven wheel center and then decelerating as the pin traverses the reverse direction to provide precise positioning with adjacent pins engaging the open ends of adjacent slots in the stop position of the cylinder. 8 Claims, 3 Drawing Figures

  19. Low-Resolution Tactile Image Recognition for Automated Robotic Assembly Using Kernel PCA-Based Feature Fusion and Multiple Kernel Learning-Based Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Yi-Hung Liu

    2014-01-01

    Full Text Available In this paper, we propose a robust tactile sensing image recognition scheme for automatic robotic assembly. First, an image reprocessing procedure is designed to enhance the contrast of the tactile image. In the second layer, geometric features and Fourier descriptors are extracted from the image. Then, kernel principal component analysis (kernel PCA is applied to transform the features into ones with better discriminating ability, which is the kernel PCA-based feature fusion. The transformed features are fed into the third layer for classification. In this paper, we design a classifier by combining the multiple kernel learning (MKL algorithm and support vector machine (SVM. We also design and implement a tactile sensing array consisting of 10-by-10 sensing elements. Experimental results, carried out on real tactile images acquired by the designed tactile sensing array, show that the kernel PCA-based feature fusion can significantly improve the discriminating performance of the geometric features and Fourier descriptors. Also, the designed MKL-SVM outperforms the regular SVM in terms of recognition accuracy. The proposed recognition scheme is able to achieve a high recognition rate of over 85% for the classification of 12 commonly used metal parts in industrial applications.

  20. A Model for Concurrent Objects

    DEFF Research Database (Denmark)

    Sørensen, Morten U.

    1996-01-01

    We present a model for concurrent objects where obejcts interact by taking part in common events that are closely matched to form call-response pairs, resulting in resulting in rendez-vous like communications. Objects are built from primitive objects by parallel composition, encapsulation...

  1. Forward progress on GPU concurrency

    NARCIS (Netherlands)

    Donaldson, A.F.; Ketema, J.; Sorensen, T.; Wickerson, J.

    2017-01-01

    The tutorial at CONCUR will provide a practical overview of work undertaken over the last six years in the Multicore Programming Group at Imperial College London, and with collaborators internationally, related to understanding and reasoning about concurrency in software designed for acceleration on

  2. True Concurrency can be Traced

    DEFF Research Database (Denmark)

    Engberg, Uffe Henrik

    1990-01-01

    In this paper sets of labelled partial orders are employed as fundamental mathematical entities for modelling nondeterministic and concurrent processes thereby obtaining so-called noninterleaving semantics. Based on closures of sets of labelled partial orders, a simple algebraic language with ref...

  3. Relationships between models of concurrency

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Sassone, Vladimiro; Winskel, Glynn

    1994-01-01

    Models for concurrency can be classified with respect to the three relevant parameters: behaviour/system, interleaving/noninterleaving, linear/branching time. When modelling a process, a choice concerning such parameters corresponds to choosing the level of abstraction of the resulting semantics....

  4. Bacteriophage Assembly

    Directory of Open Access Journals (Sweden)

    Anastasia A. Aksyuk

    2011-02-01

    Full Text Available Bacteriophages have been a model system to study assembly processes for over half a century. Formation of infectious phage particles involves specific protein-protein and protein-nucleic acid interactions, as well as large conformational changes of assembly precursors. The sequence and molecular mechanisms of phage assembly have been elucidated by a variety of methods. Differences and similarities of assembly processes in several different groups of bacteriophages are discussed in this review. The general principles of phage assembly are applicable to many macromolecular complexes.

  5. Fuel assemblies

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi.

    1979-01-01

    Purpose: To prevent scattering of gaseous fission products released from fuel assemblies stored in an fbr type reactor. Constitution; A cap provided with means capable of storing gas is adapted to amount to the assembly handling head, for example, by way of threading in a storage rack of spent fuel assemblies consisting of a bottom plate, a top plate and an assembly support mechanism. By previously eliminating the gas inside of the assembly and the cap in the storage rack, gaseous fission products upon loading, if released from fuel rods during storage, are stored in the cap and do not scatter in the storage rack. (Horiuchi, T.)

  6. Sequence assembly

    DEFF Research Database (Denmark)

    Scheibye-Alsing, Karsten; Hoffmann, S.; Frankel, Annett Maria

    2009-01-01

    Despite the rapidly increasing number of sequenced and re-sequenced genomes, many issues regarding the computational assembly of large-scale sequencing data have remain unresolved. Computational assembly is crucial in large genome projects as well for the evolving high-throughput technologies and...... in genomic DNA, highly expressed genes and alternative transcripts in EST sequences. We summarize existing comparisons of different assemblers and provide a detailed descriptions and directions for download of assembly programs at: http://genome.ku.dk/resources/assembly/methods.html....

  7. Concurrent Programming Using Actors: Exploiting Large-Scale Parallelism,

    Science.gov (United States)

    1985-10-07

    ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK* Artificial Inteligence Laboratory AREA Is WORK UNIT NUMBERS 545 Technology Square...D-R162 422 CONCURRENT PROGRMMIZNG USING f"OS XL?ITP TEH l’ LARGE-SCALE PARALLELISH(U) NASI AC E Al CAMBRIDGE ARTIFICIAL INTELLIGENCE L. G AGHA ET AL...RESOLUTION TEST CHART N~ATIONAL BUREAU OF STANDA.RDS - -96 A -E. __ _ __ __’ .,*- - -- •. - MASSACHUSETTS INSTITUTE OF TECHNOLOGY ARTIFICIAL

  8. Data refinement for true concurrency

    Directory of Open Access Journals (Sweden)

    Brijesh Dongol

    2013-05-01

    Full Text Available The majority of modern systems exhibit sophisticated concurrent behaviour, where several system components modify and observe the system state with fine-grained atomicity. Many systems (e.g., multi-core processors, real-time controllers also exhibit truly concurrent behaviour, where multiple events can occur simultaneously. This paper presents data refinement defined in terms of an interval-based framework, which includes high-level operators that capture non-deterministic expression evaluation. By modifying the type of an interval, our theory may be specialised to cover data refinement of both discrete and continuous systems. We present an interval-based encoding of forward simulation, then prove that our forward simulation rule is sound with respect to our data refinement definition. A number of rules for decomposing forward simulation proofs over both sequential and parallel composition are developed.

  9. Concurrent Product & Supply Chain Creation

    DEFF Research Database (Denmark)

    Gubi, Ebbe

    it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i.......e. by creating Focused Supply Chains. At the same time, customer satisfaction can be increased. As a second means to achieving a better fit between product and supply chain, the firm can deploy Design for Logistics, the discipline of considering the supply chain during product creation. The thesis sets out...... and supply chains should be created concurrently and integrated. The concept of Concurrent Product & Supply Chain Creation is introduced, and the two main components Focused Supply Chains and Design For Logistics are explained and exemplified by use of Bang & Olufsen....

  10. Adding Concurrency to Smart Contracts

    OpenAIRE

    Dickerson, Thomas; Gazzillo, Paul; Herlihy, Maurice; Koskinen, Eric

    2017-01-01

    Modern cryptocurrency systems, such as Ethereum, permit complex financial transactions through scripts called smart contracts. These smart contracts are executed many, many times, always without real concurrency. First, all smart contracts are serially executed by miners before appending them to the blockchain. Later, those contracts are serially re-executed by validators to verify that the smart contracts were executed correctly by miners. Serial execution limits system throughput and fails ...

  11. Evaluation of concurrent peak responses

    International Nuclear Information System (INIS)

    Wang, P.C.; Curreri, J.; Reich, M.

    1983-01-01

    This report deals with the problem of combining two or more concurrent responses which are induced by dynamic loads acting on nuclear power plant structures. Specifically, the acceptability of using the square root of the sum of the squares (SRSS) value of peak values as the combined response is investigated. Emphasis is placed on the establishment of a simplified criterion that is convenient and relatively easy to use by design engineers

  12. PyCSP - controlled concurrency

    DEFF Research Database (Denmark)

    Vinter, Brian; Friborg, Rune Møllegaard; Bjørndalen, John Markus

    2010-01-01

    Producing readable and correct programs while at the same time taking advantage of multi-core architectures is a challenge. PyCSP is an implementation of Communicating Sequential Processes algebra (CSP) for the Python programming language, that take advantage of CSP's formal and verifiable approach...... to controlling concurrency and the readability of Python source code. We describe PyCSP, demonstrate it through examples and demonstrate how PyCSP compares to Pthreads in a master-worker benchmark....

  13. PyCSP - controlled concurrency

    DEFF Research Database (Denmark)

    Friborg, Rune Møllegaard; Vinter, Brian; Bjørndalen, John Markus

    Producing readable and correct programs while at the same time taking advantage of multi-core architectures is a challenge. PyCSP is an implementation of Communicating Sequential Processes algebra (CSP) for the Python programming language, taking advantage of CSP’s formal and verifiable approach...... to controlling concurrency and the readability of Python source code. We describe PyCSP, demonstrate it through examples and demonstrate how PyCSP compares to Pthreads using a benchmark....

  14. Concurrent chemoradiation for vaginal cancer.

    Directory of Open Access Journals (Sweden)

    David T Miyamoto

    Full Text Available BACKGROUND: It is not known whether the addition of chemotherapy to radiation therapy improves outcomes in primary vaginal cancer. Here, we review clinical outcomes in patients with primary vaginal cancer treated with radiation therapy (RT or concurrent chemoradiation therapy (CRT. METHODS: Seventy-one patients with primary vaginal cancer treated with definitive RT with or without concurrent chemotherapy at a single institution were identified and their records reviewed. A total of 51 patients were treated with RT alone; 20 patients were treated with CRT. Recurrences were analyzed. Overall survival (OS and disease-free survival (DFS rates were estimated using the Kaplan-Meier method. Cox regression analysis was performed. RESULTS: The median age at diagnosis was 61 years (range, 18-92 years and the median follow-up time among survivors was 3.0 years. Kaplan-Meier estimates for OS and DFS differed significantly between the RT and CRT groups (3-yr OS = 56% vs. 79%, log-rank p = 0.037; 3-yr DFS = 43% vs. 73%, log-rank p = 0.011. Twenty-three patients (45% in the RT group had a relapse at any site compared to 3 (15% in the CRT group (p = 0.027. With regard to the sites of first relapse, 10 patients (14% had local only, 4 (6% had local and regional, 9 (13% had regional only, 1 (1% had regional and distant, and 2 (3% had distant only relapse. On univariate analysis, the use of concurrent chemotherapy, FIGO stage, tumor size, and date of diagnosis were significant predictors of DFS. On multivariate analysis, the use of concurrent chemotherapy remained a significant predictor of DFS (hazard ratio 0.31 (95% CI, 0.10-0.97; p = 0.04. CONCLUSIONS: Vaginal cancer results in poor outcomes. Adequate radiation dose is essential to ensure curative management. Concurrent chemotherapy should be considered for vaginal cancer patients.

  15. Concurrence classes for general pure multipartite states

    International Nuclear Information System (INIS)

    Heydari, Hoshang

    2005-01-01

    We propose concurrence classes for general pure multipartite states based on an orthogonal complement of a positive operator-valued measure on quantum phase. In particular, we construct W m class, GHZ m , and GHZ m-1 class concurrences for general pure m-partite states. We give explicit expressions for W 3 and GHZ 3 class concurrences for general pure three-partite states and for W 4 , GHZ 4 and GHZ 3 class concurrences for general pure four-partite states

  16. Simple concurrent garbage collection almost without synchronization

    NARCIS (Netherlands)

    Hesselink, Wim H.; Lali, M.I.

    We present two simple mark and sweep algorithms, A and B, for concurrent garbage collection by a single collector running concurrently with a number of mutators that concurrently modify shared data. Both algorithms are based on the ideas of Ben-Ari's classical algorithm for on-the-fly garbage

  17. Steps in Modular Specifications for Concurrent Modules

    DEFF Research Database (Denmark)

    Da Rocha Pinto, Pedro; Dinsdale-Young, Thomas; Gardner, Philippa

    2015-01-01

    The specification of a concurrent program module is a difficult problem. The specifications must be strong enough to enable reasoning about the intended clients without reference to the underlying module implementation. We survey a range of verification techniques for specifying concurrent module......, in particular highlighting four key concepts: auxiliary state, interference abstraction, resource ownership and atomicity. We show how these concepts combine to provide powerful approaches to specifying concurrent modules.......The specification of a concurrent program module is a difficult problem. The specifications must be strong enough to enable reasoning about the intended clients without reference to the underlying module implementation. We survey a range of verification techniques for specifying concurrent modules...

  18. Specifying and Verifying Concurrent Programs.

    Science.gov (United States)

    1985-02-01

    for Verification and Specification of Concurrent Systems, held in La - Colle - Sur - Loup , France in October, 1984. Work Supported in part by the National...Proc. ACM Symposium on Princi- 0 ples of Programming Languages, Las Vegas, (January 1980), 251-261. [7] J. V. Guttag and J. J. Horning. An Introduction...names in ’V(S). However, the two formulas behave differently under a renaming mapping p. In particu- lar. p(Vv :A( LA )) equals Vv :p(A(v)), so the

  19. Multiprocessor systems and their concurrency

    Energy Technology Data Exchange (ETDEWEB)

    Starke, P H

    1984-01-01

    A multiprocessor system can be considered as a collection of finite automata which communicate over channels or shared memory units. The behaviour of such a system can be described by a semilanguage. This approach allows to define a numerical measure for the concurrency of multiprocessor systems and of distributed systems. This measure is characterized algebraically and the reconfiguration problem asking for an algorithm to construct an l-processor system which is equivalent to a given n-processor system is solved in the paper. 6 references.

  20. Concurrency at work with Go

    CERN Document Server

    CERN. Geneva

    2017-01-01

    High Energy and Nuclear Physics (HENP) libraries are now required to be increasingly multi-thread-safe, if not multi-thread-friendly and multi-threaded. This is usually done using the new constructs and library components offered by the C++11 and C++14 standards. These components are however quite low-level (threads, mutexes, locks, ...) and hard to use and compose, or easy to misuse. However, Go -- a somewhat new language -- provides a set of better building blocks for tackling concurrency: goroutines and channels. This language is now used by the cloud industry at large; docker/moby, rkt, Kubernetes, OpenShift, etc... are obvious flagships for Go. It is also used in other interesting places like SpaceX's telemetry monitoring system and in the New York Times', YouTube's or Disney's content delivery infrastructures. In this talk, we will describe the building blocks of Go and see how they are combined to easily create concurrent programs that grow with grace, are fast to compile and deploy, but also easy to...

  1. Patients survey after concurrent chemoradiotherapy

    International Nuclear Information System (INIS)

    Shimane, Toshikazku; Egawa, Syunya; Mori, Tomoaki; Ono, Tomohiro; Monden, Tetsuya; Kobayashi, Sei; Sanbe, Takeyuki; Suzaki, Harumi

    2010-01-01

    Concurrent chemoradiotherapy for cancer of head and neck is becoming more popular as the treatment of choice. It is considered to maintain the quality of life (QOL) of patients better than operative treatments in terms of preserving the functions, organs, and figure, but recently we cannot necessarily say that it maintains the QOL of patients better than operative treatments because its complications after therapy disturb daily life. We report the results of a questionnaire survey about complications after therapy, problems during therapy, improvements, and satisfaction level directed at patients with cancer of the head and neck who received Concurrent chemoradiotherapy for the purpose of ascertaining if patients can actually maintain their QOL after therapy. As a result, the most controversial problem was mouth dryness, but the symptom improved as the follow-up duration got longer. As for the satisfaction level, 'very-satisfied' and 'almost-satisfied' were more than 90%, so we concluded that the QOL of patients is maintained after therapy, while there are still improvements to be made. We also concluded that we should continue to make improvement and try to improve the QOL of patients during and after therapy. (author)

  2. WHO: World Health Assembly.

    Science.gov (United States)

    McGregor, A

    1992-05-23

    1200 delegates from 175 member countries attended the 45th World Health Assembly in Geneva. Everyone at the Assembly ratified measures to prevent and control AIDS. 12 countries intended to do long term planning for community based care for AIDS patients. Further the Assembly denounced instances where countries and individuals denied the gravity of the AIDS pandemic. In fact, it expressed the importance for urgent and intensive action against HIV/AIDS. The assembly backed proposals to prevent and control sexually transmitted diseases that affect AIDS patients, especially hepatitis B. For example, in countries with hepatitis B prevalence 8% (many countries in Sub-Sahara Africa, Asia, the Pacific region, and South America), health officials should introduce hepatitis B vaccine into their existing immunization programs by 1995. By 1997, this vaccine should be part of all immunization programs. The Assembly was aware of the obstacles of establishing reliable cold chains for nationwide distribution, however. Delegates in Committee A objected to the fact that 50% of the populations of developing countries continued to have limited access to essential drugs. They also expressed disapproval in implementation of WHO's 1988 ethical criteria for promotion of drugs which WHO entrusted to the Council for International Organisations of Medical Sciences (CIOMS). CIOMS lacked WHO's status and thus could not effectively monitor drug advertising. In fact, the pharmaceutical industry as well as WHO provided the funds for a meeting of 25 experts to discuss principles included in the ethical criteria. At least 4 countries insisted that WHO have the ultimate authority in monitoring drug advertising. Delegates did adopt a compromise resolution on this topic which required that industry promotion methods be reported to the 1994 Assembly via the Executive Board. The Assembly requested WHO to establish an international advisory committee on nursing and midwifery and to improve the network of

  3. General Assembly debate on IAEA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-01-15

    On 3 November 1959, the General Assembly of the United Nations considered the annual report of the International Atomic Energy Agency, the first report to cover a full operational year of the Agency - 1 July 1959 to 30 June 1959, more recent developments having been summarized in a preface. At the end of the debate the Assembly adopted a resolution, submitted jointly by Czechoslovakia, the Union of South Africa and the United Arab Republic, taking note of the report

  4. Method and system for dual resolution translation stage

    Science.gov (United States)

    Halpin, John Michael

    2014-04-22

    A dual resolution translation stage includes a stage assembly operable to receive an optical element and a low resolution adjustment device mechanically coupled to the stage assembly. The dual resolution stage also includes an adjustable pivot block mechanically coupled to the stage assembly. The adjustable pivot block includes a pivot shaft. The dual resolution stage further includes a lever arm mechanically coupled to the adjustable pivot block. The lever arm is operable to pivot about the pivot shaft. The dual resolution stage additionally includes a high resolution adjustment device mechanically coupled to the lever arm and the stage assembly.

  5. Threaded cognition: an integrated theory of concurrent multitasking.

    Science.gov (United States)

    Salvucci, Dario D; Taatgen, Niels A

    2008-01-01

    The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking--that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed across other available resources (e.g., perceptual and motor resources). The theory specifies a parsimonious mechanism that allows for concurrent execution, resource acquisition, and resolution of resource conflicts, without the need for specialized executive processes. By instantiating this mechanism as a computational model, threaded cognition provides explicit predictions of how multitasking behavior can result in interference, or lack thereof, for a given set of tasks. The authors illustrate the theory in model simulations of several representative domains ranging from simple laboratory tasks such as dual-choice tasks to complex real-world domains such as driving and driver distraction. (c) 2008 APA, all rights reserved

  6. Concurrent systems and time synchronization

    Science.gov (United States)

    Burgin, Mark; Grathoff, Annette

    2018-05-01

    In the majority of scientific fields, system dynamics is described assuming existence of unique time for the whole system. However, it is established theoretically, for example, in relativity theory or in the system theory of time, and validated experimentally that there are different times and time scales in a variety of real systems - physical, chemical, biological, social, etc. In spite of this, there are no wide-ranging scientific approaches to exploration of such systems. Therefore, the goal of this paper is to study systems with this property. We call them concurrent systems because processes in them can go, events can happen and actions can be performed in different time scales. The problem of time synchronization is specifically explored.

  7. Nutritional strategies to support concurrent training.

    Science.gov (United States)

    Perez-Schindler, Joaquin; Hamilton, D Lee; Moore, Daniel R; Baar, Keith; Philp, Andrew

    2015-01-01

    Concurrent training (the combination of endurance exercise to resistance training) is a common practice for athletes looking to maximise strength and endurance. Over 20 years ago, it was first observed that performing endurance exercise after resistance exercise could have detrimental effects on strength gains. At the cellular level, specific protein candidates have been suggested to mediate this training interference; however, at present, the physiological reason(s) behind the concurrent training effect remain largely unknown. Even less is known regarding the optimal nutritional strategies to support concurrent training and whether unique nutritional approaches are needed to support endurance and resistance exercise during concurrent training approaches. In this review, we will discuss the importance of protein supplementation for both endurance and resistance training adaptation and highlight additional nutritional strategies that may support concurrent training. Finally, we will attempt to synergise current understanding of the interaction between physiological responses and nutritional approaches into practical recommendations for concurrent training.

  8. Rain VM: Portable Concurrency through Managing Code

    OpenAIRE

    Brown, Neil C.C.

    2006-01-01

    A long-running recent trend in computer programming is the growth in popularity of virtual machines. However, few have included good support for concurrency - a natural mechanism in the Rain programming language. This paper details the design and implementation of a secure virtual machine with support for concurrency, which enables portability of concurrent programs. Possible implementation ideas of many-to-many threading models for the virtual machine kernel are discussed, and initial benchm...

  9. Concurrence of three Jaynes-Cummings systems

    Science.gov (United States)

    Qiang, Wen-Chao; Sun, Guo-Hua; Dong, Qian; Camacho-Nieto, Oscar; Dong, Shi-Hai

    2018-04-01

    We apply genuine multipartite concurrence to investigate entanglement properties of three Jaynes-Cummings systems. Three atoms are initially put in GHZ-like state and locally interact with three independent cavities, respectively. We present analytical concurrence expressions for various subsystems including three-atom, three-cavity and some atom-cavity mixed systems. We also examine the global system and illustrate the evolution of its concurrence. Except for the sudden death of entanglement, we find for some initial entanglement parameter θ , the concurrence of the global system may maintain unchanged in some time intervals.

  10. How does concurrent sourcing affect performance?

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    2010-01-01

    be modelled. The propositions and discussion offer researchers a starting-point for further research. Practical implications – The propositions that are developed suggest that managers should consider using concurrent sourcing when they face problems caused by volume uncertainty, technological uncertainty....../methodology/approach – Based on transaction cost, agency, neoclassical economic, knowledge-based, and resource-based theory, it is proposed to show how concurrent sourcing affects performance. Findings – The paper argues that concurrent sourcing improves performance when firms face a combination of volume uncertainty...... how concurrent sourcing affects performance of the market and the hierarchy....

  11. A Reference Framework for Concurrent Engineering

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Considering the diversity of methods and tools offered to concurrent engineering, the aspects playing important roles in the concurrent engineering c ontext have been pinpointed as being four core elements which are Activity, Meth od, Object and Information. Based on these four elements, a reference framework called AMOI is proposed to be the guideline for the systematic concurrent produc t design. Using the AMOI reference framework, concurrent product development sys tem can be structured into four function models (including the activity model, m ethod model, object model and information model) which are interconnected with e ach other.

  12. Fuel assembly

    International Nuclear Information System (INIS)

    Abe, Hideaki; Sakai, Takao; Ishida, Tomio; Yokota, Norikatsu.

    1992-01-01

    The lower ends of a plurality of plate-like shape memory alloys are secured at the periphery of the upper inside of the handling head of a fuel assembly. As the shape memory alloy, a Cu-Zn alloy, a Ti-Pd alloy or a Fe-Ni alloy is used. When high temperature coolants flow out to the handling head, the shape memory alloy deforms by warping to the outer side more greatly toward the upper portion thereof with the temperature increase of the coolants. As the result, the shape of the flow channel of the coolants is changed so as to enlarge at the exit of the upper end of the fuel assembly. Then, the pressure loss of the coolants in the fuel assembly is decreased by the enlargement. Accordingly, the flow rate of the coolants in the fuel assembly is increased to lower the temperature of the coolants. Further, high temperature coolants and low temperature coolants are mixed sufficiently just above the fuel assembly. This can suppress the temperature fluctuation of the mixed coolants in the upper portion of the reactor core, thereby enabling to decrease a fatigue and failures of the structural components in the upper portion of the reactor core. (I.N.)

  13. Fuel assembly

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi; Matsuzuka, Ryuji.

    1976-01-01

    Object: To provide a fuel assembly which can decrease pressure loss of coolant to uniform temperature. Structure: A sectional area of a flow passage in the vicinity of an inner peripheral surface of a wrapper tube is limited over the entire length to prevent the temperature of a fuel element in the outermost peripheral portion from being excessively decreased to thereby flatten temperature distribution. To this end, a plurality of pincture-frame-like sheet metals constituting a spacer for supporting a fuel assembly, which has a plurality of fuel elements planted lengthwise and in given spaced relation within the wrapper tube, is disposed in longitudinal grooves and in stacked fashion to form a substantially honeycomb-like space in cross section. The fuel elements are inserted and supported in the space to form a fuel assembly. (Kamimura, M.)

  14. Fuel assemblies

    International Nuclear Information System (INIS)

    Nagano, Mamoru; Yoshioka, Ritsuo

    1983-01-01

    Purpose: To effectively utilize nuclear fuels by increasing the reactivity of a fuel assembly and reduce the concentration at the central region thereof upon completion of the burning. Constitution: A fuel assembly is bisected into a central region and a peripheral region by disposing an inner channel box within a channel box. The flow rate of coolants passing through the central region is made greater than that in the peripheral region. The concentration of uranium 235 of the fuel rods in the central region is made higher. In such a structure, since the moderating effect in the central region is improved, the reactivity of the fuel assembly is increased and the uranium concentration in the central region upon completion of the burning can be reduced, fuel economy and effective utilization of uranium can be attained. (Kamimura, M.)

  15. Plant management in concurrent engineering

    International Nuclear Information System (INIS)

    Haubensack, D.; Malvache, P.; Valleix, P.

    1997-01-01

    The ImagIn project consist in a method and a set of computer tools apt to bring perceptible and assessable improvements in the operational safety of a nuclear plant. Its aim is to design an information system that would maintain a highly detailed computerised representation of a nuclear plant, in its initial state and throughout its in-service life. It is not a tool to drive or help driving the nuclear plant, but a tool that manages concurrent operations that modify the plant configuration in a very general way (maintenance for example). The configuration of the plant, as well as rules and constraints about it, are described in a object-oriented, knowledge database, which is built using a generic ImagIn meta-model based on the semantical network theory. An inference engine works on this database and is connected to reality through interfaces to operators and captors on the installation; it verifies constantly in real-time the consistency of the database according to its inner rules, and reports eventual problems to concerned operators. A special effort is made on interfaces to provide natural and intuitive tools (using virtual reality, natural language, voice recognition and synthesis). A laboratory application on a fictive but realistic installation already exist and is used to simulate various test and scenari. A real application is being constructed on SILOE, an experimental reactor of the CEA. (authors)

  16. Multiparty Compatibility for Concurrent Objects

    Directory of Open Access Journals (Sweden)

    Roly Perera

    2016-06-01

    Full Text Available Objects and actors are communicating state machines, offering and consuming different services at different points in their lifecycle. Two complementary challenges arise when programming such systems. When objects interact, their state machines must be "compatible", so that services are requested only when they are available. Dually, when objects refine other objects, their state machines must be "compliant", so that services are honoured whenever they are promised. In this paper we show how the idea of multiparty compatibility from the session types literature can be applied to both of these problems. We present an untyped language in which concurrent objects are checked automatically for compatibility and compliance. For simple objects, checking can be exhaustive and has the feel of a type system. More complex objects can be partially validated via test cases, leading to a methodology closer to continuous testing. Our proof-of-concept implementation is limited in some important respects, but demonstrates the potential value of the approach and the relationship to existing software development practices.

  17. Verified compilation of Concurrent Managed Languages

    Science.gov (United States)

    2017-11-01

    Communications Division Information Directorate This report is published in the interest of scientific and technical information exchange, and its...271, 2007. [85] Viktor Vafeiadis. Modular fine-grained concurrency verification. Technical Report UCAM-CL-TR- 726, University of Cambridge, Computer...VERIFIED COMPILATION OF CONCURRENT MANAGED LANGUAGES PURDUE UNIVERSITY NOVEMBER 2017 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE

  18. Ecological association between HIV and concurrency point ...

    African Journals Online (AJOL)

    Ecological association between HIV and concurrency point-prevalence in South Africa's ethnic groups. Chris Kenyon. Abstract. HIV prevalence between different ethnic groups within South Africa exhibits considerable variation. Numerous authors believe that elevated sexual partner concurrency rates are important in the ...

  19. A Temporal Concurrent Constraint Programming Calculus

    DEFF Research Database (Denmark)

    Palamidessi, Catuscia; Valencia Posso, Frank Darwin

    2001-01-01

    The tcc model is a formalism for reactive concurrent constraint programming. In this paper we propose a model of temporal concurrent constraint programming which adds to tcc the capability of modeling asynchronous and non-deterministic timed behavior. We call this tcc extension the ntcc calculus...

  20. New concurrent iterative methods with monotonic convergence

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Qingchuan [Michigan State Univ., East Lansing, MI (United States)

    1996-12-31

    This paper proposes the new concurrent iterative methods without using any derivatives for finding all zeros of polynomials simultaneously. The new methods are of monotonic convergence for both simple and multiple real-zeros of polynomials and are quadratically convergent. The corresponding accelerated concurrent iterative methods are obtained too. The new methods are good candidates for the application in solving symmetric eigenproblems.

  1. Valve assembly

    International Nuclear Information System (INIS)

    Sandling, M.

    1981-01-01

    An improved valve assembly, used for controlling the flow of radioactive slurry, is described. Radioactive contamination of the air during removal or replacement of the valve is prevented by sucking air from the atmosphere through a portion of the structure above the valve housing. (U.K.)

  2. Fuel assembly

    International Nuclear Information System (INIS)

    Gjertsen, R.K.; Bassler, E.A.; Huckestein, E.A.; Salton, R.B.; Tower, S.N.

    1988-01-01

    A fuel assembly adapted for use with a pressurized water nuclear reactor having capabilities for fluid moderator spectral shift control is described comprising: parallel arranged elongated nuclear fuel elements; means for providing for axial support of the fuel elements and for arranging the fuel elements in a spaced array; thimbles interspersed among the fuel elements adapted for insertion of a rod control cluster therewithin; means for structurally joining the fuel elements and the guide thimbles; fluid moderator control means for providing a volume of low neutron absorbing fluid within the fuel assembly and for removing a substantially equivalent volume of reactor coolant water therefrom, a first flow manifold at one end of the fuel assembly sealingly connected to a first end of the moderator control tubes whereby the first ends are commonly flow connected; and a second flow manifold, having an inlet passage and an outlet passage therein, sealingly connected to a second end of the moderator control tubes at a second end of the fuel assembly

  3. Cutaneous xanthomas with concurrent demodicosis and dermatophytosis in a cat.

    Science.gov (United States)

    Vogelnest, L J

    2001-07-01

    Multiple cutaneous xanthomas, associated with fasting hyperlipidaemia, are described in a 9-month-old domestic long-haired cat. A severely pruritic, papular, and crusting dermatitis affecting the head and neck, initially diagnosed as lesions of the eosinophilic granuloma complex, progressively developed on the head and pinnae. Pruritus was controlled with administration of prednisolone and chlorambucil. Repeat histological examination confirmed the diagnosis of cutaneous xanthoma and concurrent mild demodicosis. Marked fasting hypercholesterolaemia, hypertriglyceridaemia and transient hyperglycaemia were subsequently confirmed. Treatment for hyperlipidaemia and xanthomas with a low-fat diet (Hill's Feline r/d) and the previously unreported treatment for feline demodicosis of daily oral milbemycin were commenced. Multiple pink, alopecic plaques and papules gradually regressed, however pruritus recurred if immunosuppressive treatment was reduced, and well-demarcated areas of alopecia developed on the head, limbs and trunk, despite negative skin scrapings for demodex mites. Fungal culture of hair samples yielded Microsporum canis. All cutaneous lesions resolved with the addition of griseofulvin to the treatment regimen. Concurrent corneal ulceration and keratoconjunctivitis sicca ultimately resolved with treatment, including topical cyclosporin. Diabetes mellitus developed 6 months after resolution of skin lesions. No cutaneous or ocular abnormalities were present 6 months later with continued low-fat diet and insulin administration, although transient recurrence of papules and pruritus occurred after inadvertent access to a fatty meal. An underlying primary hyperlipidaemia was suspected, causing pruritic xanthomas. This may represent the first report of concurrent cutaneous xanthomas, demodicosis and dermatophytosis in a cat.

  4. Fuel assembly

    International Nuclear Information System (INIS)

    Yokota, Tokunobu.

    1990-01-01

    A fuel assembly used in a FBR type nuclear reactor comprises a plurality of fuel rods and a moderator guide member (water rod). A moderator exit opening/closing mechanism is formed at the upper portion of the moderator guide member for opening and closing a moderator exit. In the initial fuel charging operation cycle to the reactor, the moderator exit is closed by the moderator exit opening/closing mechanism. Then, voids are accumulated at the inner upper portion of the moderator guide member to harden spectrum and a great amount of plutonium is generated and accumulated in the fuel assembly. Further, in the fuel re-charging operation cycle, the moderator guide member is used having the moderator exit opened. In this case, voids are discharged from the moderator guide member to decrease the ratio, and the plutonium accumulated in the initial charging operation cycle is burnt. In this way, the fuel economy can be improved. (I.N.)

  5. Fuel assemblies

    International Nuclear Information System (INIS)

    Echigoya, Hironori; Nomata, Terumitsu.

    1983-01-01

    Purpose: To render the axial distribution relatively flat. Constitution: First nuclear element comprises a fuel can made of zircalloy i.e., the metal with less neutron absorption, which is filled with a plurality of UO 2 pellets and sealed by using a lower end plug, a plenum spring and an upper end plug by means of welding. Second fuel element is formed by substituting a part of the UO 2 pellets with a water tube which is sealed with water and has a space for allowing the heat expansion. The nuclear fuel assembly is constituted by using the first and second fuel elements together. In such a structure, since water reflects neutrons and decrease their leakage to increase the temperature, reactivity is added at the upper portion of the fuel assembly to thereby flatten the axial power distribution. Accordingly, stable operation is possible only by means of deep control rods while requiring no shallow control rods. (Sekiya, K.)

  6. Fuel assembly

    International Nuclear Information System (INIS)

    Kawai, Mitsuo.

    1988-01-01

    Purpose: To reduce the corrosion rate and suppress the increase of radioactive corrosion products in reactor water of nuclear fuel assemblies for use in BWR type reactors having spacer springs made of nickel based deposition reinforced type alloys. Constitution: Spacer rings made of nickel based deposition reinforced type alloy are incorporated and used as fuel assemblies after applying treatment of dipping and maintaining at high temperature water followed by heating in steams. Since this can remove the nickel leaching into reactor water at the initial stage, Co-58 as the radioactive corrosion products in the reactor water can be reduced, and the operation at in-service inspection or repairement can be facilitated to improve the working efficiency of the nuclear power plant. The dipping time is desirably more than 10 hours and more desirably more than 30 hours. (Horiuchi, T. )

  7. Fuel assembly

    International Nuclear Information System (INIS)

    Watanabe, Shoichi; Hirano, Yasushi.

    1998-01-01

    A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

  8. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    5th April, 2016 – Ordinary General Assembly of the Staff Association! In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, April 5th 2016 from 11:00 to 12:00 in BE Auditorium, Meyrin (6-2-024). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its financial management, and an opportunity to express one’s opinion, including taking part in the votes. Other points are listed on the agenda, as proposed by the Staff Council. Who can vote? Only “ordinary” members (MPE) of the SA can vote. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give his/her opinion? The Ordinary General Asse...

  9. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Sei; Ando, Ryohei; Mitsutake, Toru.

    1995-01-01

    The present invention concerns a fuel assembly suitable to a BWR-type reactor and improved especially with the nuclear characteristic, heat performance, hydraulic performance, dismantling or assembling performance and economical property. A part of poison rods are formed as a large-diameter/multi-region poison rods having a larger diameter than a fuel rod. A large number of fuel rods are disposed surrounding a large diameter water rod and a group of the large-diameter/multi-region poison rods in adjacent with the water rod. The large-diameter water rod has a burnable poison at the tube wall portion. At least a portion of the large-diameter poison rods has a coolant circulation portion allowing coolants to circulate therethrough. Since the large-diameter poison rods are disposed at a position of high neutron fluxes, a large neutron multiplication factor suppression effect can be provided, thereby enabling to reduce the number of burnable poison rods relative to fuels. As a result, power peaking in the fuel assembly is moderated and a greater amount of plutonium can be loaded. In addition the flow of cooling water which tends to gather around the large diameter water rod can be controlled to improve cooling performance of fuels. (N.H.)

  10. Deterministic nanoparticle assemblies: from substrate to solution

    International Nuclear Information System (INIS)

    Barcelo, Steven J; Gibson, Gary A; Yamakawa, Mineo; Li, Zhiyong; Kim, Ansoon; Norris, Kate J

    2014-01-01

    The deterministic assembly of metallic nanoparticles is an exciting field with many potential benefits. Many promising techniques have been developed, but challenges remain, particularly for the assembly of larger nanoparticles which often have more interesting plasmonic properties. Here we present a scalable process combining the strengths of top down and bottom up fabrication to generate deterministic 2D assemblies of metallic nanoparticles and demonstrate their stable transfer to solution. Scanning electron and high-resolution transmission electron microscopy studies of these assemblies suggested the formation of nanobridges between touching nanoparticles that hold them together so as to maintain the integrity of the assembly throughout the transfer process. The application of these nanoparticle assemblies as solution-based surface-enhanced Raman scattering (SERS) materials is demonstrated by trapping analyte molecules in the nanoparticle gaps during assembly, yielding uniformly high enhancement factors at all stages of the fabrication process. (paper)

  11. A Probabilistic Model of the LMAC Protocol for Concurrent Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Esparza, Luz Judith R; Zeng, Kebin; Nielsen, Bo Friis

    2011-01-01

    We present a probabilistic model for the network setup phase of the Lightweight Medium Access Protocol (LMAC) for concurrent Wireless Sensor Networks. In the network setup phase, time slots are allocated to the individual sensors through resolution of successive collisions. The setup phase...

  12. The Caltech Concurrent Computation Program - Project description

    Science.gov (United States)

    Fox, G.; Otto, S.; Lyzenga, G.; Rogstad, D.

    1985-01-01

    The Caltech Concurrent Computation Program wwhich studies basic issues in computational science is described. The research builds on initial work where novel concurrent hardware, the necessary systems software to use it and twenty significant scientific implementations running on the initial 32, 64, and 128 node hypercube machines have been constructed. A major goal of the program will be to extend this work into new disciplines and more complex algorithms including general packages that decompose arbitrary problems in major application areas. New high-performance concurrent processors with up to 1024-nodes, over a gigabyte of memory and multigigaflop performance are being constructed. The implementations cover a wide range of problems in areas such as high energy and astrophysics, condensed matter, chemical reactions, plasma physics, applied mathematics, geophysics, simulation, CAD for VLSI, graphics and image processing. The products of the research program include the concurrent algorithms, hardware, systems software, and complete program implementations.

  13. MLIP: A Concurrent Approach for Clipping Indexing

    OpenAIRE

    Majoju Ravinder; R.Vijay Prakash

    2011-01-01

    Multidimensional databases are beginning to be used in a wide range of applications. To meet this fast-growing demand, the R-tree family is being applied to support fast access to multidimensional data, for which the R+-tree exhibits outstanding search performance. In order to support efficient concurrent access in multi-user environments, concurrency control mechanisms for multidimensional indexing have been proposed. However, these mechanisms cannot be directly applied to the R+-tree becaus...

  14. Fuel assembly

    International Nuclear Information System (INIS)

    Fujibayashi, Toru.

    1970-01-01

    Herein disclosed is a fuel assembly in which a fuel rod bundle is easily detachable by rotating a fuel rod fastener rotatably mounted to the upper surface of an upper tie-plate supporting a fuel bundle therebelow. A locking portion at the leading end of each fuel rod protrudes through the upper tie-plate and is engaged with or separated from the tie-plate by the rotation of the fastener. The removal of a desired fuel rod can therefore be remotely accomplished without the necessity of handling pawls, locking washers and nuts. (Owens, K.J.)

  15. Assembling consumption

    DEFF Research Database (Denmark)

    Assembling Consumption marks a definitive step in the institutionalisation of qualitative business research. By gathering leading scholars and educators who study markets, marketing and consumption through the lenses of philosophy, sociology and anthropology, this book clarifies and applies...... the investigative tools offered by assemblage theory, actor-network theory and non-representational theory. Clear theoretical explanation and methodological innovation, alongside empirical applications of these emerging frameworks will offer readers new and refreshing perspectives on consumer culture and market...... societies. This is an essential reading for both seasoned scholars and advanced students of markets, economies and social forms of consumption....

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Kurihara, Kunitoshi; Azekura, Kazuo.

    1992-01-01

    In a reactor core of a heavy water moderated light water cooled pressure tube type reactor, no sufficient effects have been obtained for the transfer width to a negative side of void reactivity change in a region of a great void coefficient. Then, a moderation region divided into upper and lower two regions is disposed at the central portion of a fuel assembly. Coolants flown into the lower region can be discharged to the cooling region from an opening disposed at the upper end portion of the lower region. Light water flows from the lower region of the moderator region to the cooling region of the reactor core upper portion, to lower the void coefficient. As a result, the reactivity performance at low void coefficient, i.e., a void reaction rate is transferred to the negative side. Thus, this flattens the power distribution in the fuel assembly, increases the thermal margin and enables rapid operaiton and control of the reactor core, as well as contributes to the increase of fuel burnup ratio and reduction of the fuel cycle cost. (N.H.)

  17. Fuel assembly

    International Nuclear Information System (INIS)

    Chaki, Masao; Nishida, Koji; Karasawa, Hidetoshi; Kanazawa, Toru; Orii, Akihito; Nagayoshi, Takuji; Kashiwai, Shin-ichi; Masuhara, Yasuhiro

    1998-01-01

    The present invention concerns a fuel assembly, for a BWR type nuclear reactor, comprising fuel rods in 9 x 9 matrix. The inner width of the channel box is about 132mm and the length of the fuel rods which are not short fuel rods is about 4m. Two water rods having a circular cross section are arranged on a diagonal line in a portion of 3 x 3 matrix at the center of the fuel assembly, and two fuel rods are disposed at vacant spaces, and the number of fuel rods is 74. Eight fuel rods are determined as short fuel rods among 74 fuel rods. Assuming the fuel inventory in the short fuel rod as X(kg), and the fuel inventory in the fuel rods other than the short fuel rods as Y(kg), X and Y satisfy the relation: X + Y ≥ 173m, Y ≤ - 9.7X + 292, Y ≤ - 0.3X + 203 and X > 0. Then, even when the short fuel rods are used, the fuel inventory is increased and fuel economy can be improved. (I.N.)

  18. Fuel assembly

    International Nuclear Information System (INIS)

    Fushimi, Atsushi; Shimada, Hidemitsu; Aoyama, Motoo; Nakajima, Junjiro

    1998-01-01

    In a fuel assembly for an n x n lattice-like BWR type reactor, n is determined to 9 or greater, and the enrichment degree of plutonium is determined to 4.4% by weight or less. Alternatively, n is determined to 10 or greater, and the enrichment degree of plutonium is determined to 5.2% by weight or less. An average take-out burnup degree is determined to 39GWd/t or less, and the matrix is determined to 9 x 9 or more, or the average take-out burnup degree is determined to 51GWd/t, and the matrix is determined to 10 x 10 or more and the increase of the margin of the maximum power density obtained thereby is utilized for the compensation of the increase of distortion of power distribution due to decrease of the kinds of plutonium enrichment degree, thereby enabling to reduce the kind of the enrichment degree of MOX fuel rods to one. As a result, the manufacturing step for fuel pellets can be simplified to reduce the manufacturing cost for MOX fuel assemblies. (N.H.)

  19. General Assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : 1- Adoption de l’ordre du jour. 2- Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. 3- Présentation et approbation du rapport d’activités 2014. 4- Présentation et approbation du rapport financier 2014. 5- Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. 6- Programme 2015. 7- Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. 8- Pas de modifications aux Statuts de l'Association du personnel proposée. 9- Élections des membres de la Commission é...

  20. General Assembly

    CERN Multimedia

    Staff Association

    2017-01-01

    Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 avril 2016. Présentation et approbation du rapport d’activités 2016. Présentation et approbation du rapport financier 2016. Présentation et approbation du rapport des vérificateurs aux comptes pour 2016. Programme de travail 2017. Présentation et approbation du projet de budget 2017 Approbation du taux de cotisation pour 2018. Modifications aux Statuts de l'Association du personnel proposées. Élections des membres de la Commission électorale. Élections des vérifica...

  1. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    Mardi 5 avril à 11 h 00 BE Auditorium Meyrin (6-2-024) Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 mai 2015. Présentation et approbation du rapport d’activités 2015. Présentation et approbation du rapport financier 2015. Présentation et approbation du rapport des vérificateurs aux comptes pour 2015. Programme de travail 2016. Présentation et approbation du projet de budget 2016 Approbation du taux de cotisation pour 2017. Modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commissio...

  2. General assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. Présentation et approbation du rapport d’activités 2014. Présentation et approbation du rapport financier 2014. Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. Programme 2015. Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. Pas de modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commission électorale. &am...

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Nomata, Terumitsu.

    1993-01-01

    Among fuel pellets to be loaded to fuel cans of a fuel assembly, fuel pellets having a small thermal power are charged in a region from the end of each of spacers up to about 50mm on the upstream of coolants that flow vertically at the periphery of fuel rods. Coolants at the periphery of fuel rods are heated by the heat generation, to result in voids. However, since cooling effect on the upstream of the spacers is low due to influences of the spacers. Further, since the fuel pellets disposed in the upstream region have small thermal power, a void coefficient is not increased. Even if a thermal power exceeding cooling performance should be generated, there is no worry of causing burnout in the upstream region. Even if burnout should be caused, safety margin and reliability relative to burnout are improved, to increase an allowable thermal power, thereby enabling to improve integrity and reliability of fuel rods and fuel assemblies. (N.H.)

  4. Characterizing Distributed Concurrent Engineering Teams: A Descriptive Framework for Aerospace Concurrent Engineering Design Teams

    Science.gov (United States)

    Chattopadhyay, Debarati; Hihn, Jairus; Warfield, Keith

    2011-01-01

    As aerospace missions grow larger and more technically complex in the face of ever tighter budgets, it will become increasingly important to use concurrent engineering methods in the development of early conceptual designs because of their ability to facilitate rapid assessments and trades in a cost-efficient manner. To successfully accomplish these complex missions with limited funding, it is also essential to effectively leverage the strengths of individuals and teams across government, industry, academia, and international agencies by increased cooperation between organizations. As a result, the existing concurrent engineering teams will need to increasingly engage in distributed collaborative concurrent design. This paper is an extension of a recent white paper written by the Concurrent Engineering Working Group, which details the unique challenges of distributed collaborative concurrent engineering. This paper includes a short history of aerospace concurrent engineering, and defines the terms 'concurrent', 'collaborative' and 'distributed' in the context of aerospace concurrent engineering. In addition, a model for the levels of complexity of concurrent engineering teams is presented to provide a way to conceptualize information and data flow within these types of teams.

  5. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto; Ogiya, Shunsuke.

    1989-01-01

    For improving the economy of a BWR type reactor by making the operation cycle longer, the fuel enrichment degree has to be increased further. However, this makes the subcriticality shallower in the upper portion of the reactor core, to bring about a possibility that the reactor shutdown becomes impossible. In the present invention, a portion of fuel rod is constituted as partial length fuel rods (P-fuel rods) in which the entire stack length in the effective portion is made shorter by reducing the concentration of fissionable materials in the axial portion. A plurality of moderator rods are disposed at least on one diagonal line of a fuel assembly and P-fuel rods are arranged at a position put between the moderator rods. This makes it possible to reactor shutdown and makes the axial power distribution satisfactory even if the fuel enrichment degree is increased. (T.M.)

  6. Fuel assembly

    International Nuclear Information System (INIS)

    Bando, Masaru.

    1993-01-01

    As neutron irradiation progresses on a fuel assembly of an FBR type reactor, a strong force is exerted to cause ruptures if the arrangement of fuel elements is not displaced, whereas the fuel elements may be brought into direct contact with each other not by way of spacers to cause burning damages if the arrangement is displaced. In the present invention, the circumference of fuel elements arranged in a normal triangle lattice is surrounded by a wrapper tube having a hexagonal cross section, wire spacers are wound therearound, and deformable spacers are distributed to optional positions for fuel elements in the wrapper tube. Interaction between the fuel elements caused by irradiation is effectively absorbed, thereby enabling to delay the occurrence of the rupture and burning damages of the elements. (N.H.)

  7. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto.

    1991-01-01

    In a fuel assembly in which spectral shift type moderator guide members are arranged, the moderator guide member has a flow channel resistance member, that provides flow resistance against the moderators, in the upstream of a moderator flowing channel, by which the ratio of removing coolants is set greater at the upstream than downstream. With such a constitution, the void distribution increasing upward in the channel box except for the portion of the moderator guide member is moderated by the increase of the area of the void region that expands downward in the guide member. Accordingly, the axial power distribution is flattened throughout the operation cycle and excess distortion is eliminated to improve the fuel integrity. (T.M.)

  8. Fuel assembly

    International Nuclear Information System (INIS)

    Wataumi, Kazutoshi; Tajiri, Hiroshi.

    1992-01-01

    In a fuel assembly of a BWR type reactor, a pellet to be loaded comprises an external layer of fissile materials containing burnable poisons and an internal layer of fissile materials not containing burnable poison. For example, there is provided a dual type pellet comprising an external layer made of UO 2 incorporated with Gd 2 O 3 at a predetermined concentration as the burnable poisons and an internal layer made of UO 2 not containing Gd 2 O 3 . The amount of the burnable poisons required for predetermined places is controlled by the thickness of the ring of the external layer. This can dissipate an unnecessary poisoning effect at the final stage of the combustion cycle. Further, since only one or a few kinds of powder mixture of the burnable poisons and the fissile materials is necessary, production and product control can be facilitated. (I.N.)

  9. Fuel assembly

    International Nuclear Information System (INIS)

    Ishibashi, Yoko; Aoyama, Motoo; Oyama, Jun-ichi.

    1995-01-01

    Burnable poison-incorporating fuel rods of a first group are disposed in a region in adjacent with a water rod having a large diameter (neutron moderator rod) disposed to the central portion of a fuel assembly. Burnable poison-incorporating fuel rods of a second group are disposed to a region other than peripheral zone in adjacent with a channel box and corners positioned at an inner zone, in adjacent with the channel box. The average concentration of burnable poisons of the burnable poison-incorporating fuel rods of the first group is made greater than that of the second group. With such a constitution, when the burnable poisons of the first group are burnt out, the burnable poisons of the second group are also burnt out at the same time. Accordingly, an amount of burnable poisons left unburnt at the final stage of the operation cycle is reduced, to improve the reactivity. This can improve the economical property. (I.N.)

  10. Fuel assemblies

    International Nuclear Information System (INIS)

    Yoshioka, Ritsuo.

    1983-01-01

    Purpose: To improve the operation performance of a BWR type reactor by improving the distribution of the uranium enrichment and the incorporation amount of burnable poisons in fuel assemblies. Constitution: The average enrichment of uranium 235 is increased in the upper portion as compared with that in the lower portion, while the incorporation amount of burnable poisons is increased in an upper portion as compared with that in the lower portion. The difference in the incorporation amount of the burnable poisons between the upper and lower portions is attained by charging two kinds of fuel rods; the ones incorporated with the burnable poisons over the entire length and the others incorporated with the burnable poisons only in the upper portions. (Seki, T.)

  11. Concurrent sourcing and external supplier opportunism

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    costs of opportunism are determined as a product of four factors. The four factors are: likelihood of discovering supplier opportunism, buyer’s internalized quantity as reaction to supplier opportunism, asset specificity of external supplier’s investments, and multiplicator effects. Each......When a firm simultaneously makes and buys the same components then the firm uses concurrent sourcing. This paper presents an agency model for explaining how and when concurrent sourcing reduces the likelihood of external supplier opportunism. In the proposed model, the external supplier’s expected...... of these factors are explained and discussed in the paper. The paper ends by offering a number of theoretical and managerial implications....

  12. Notes on Timed Concurrent Constraint Programming

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Valencia, Frank D.

    2004-01-01

    and program reactive systems. This note provides a comprehensive introduction to the background for and central notions from the theory of tccp. Furthermore, it surveys recent results on a particular tccp calculus, ntcc, and it provides a classification of the expressive power of various tccp languages.......A constraint is a piece of (partial) information on the values of the variables of a system. Concurrent constraint programming (ccp) is a model of concurrency in which agents (also called processes) interact by telling and asking information (constraints) to and from a shared store (a constraint...

  13. Fuel assembly

    International Nuclear Information System (INIS)

    Hirukawa, Koji; Sakurada, Koichi.

    1992-01-01

    In a fuel assembly for a BWR type reactor, water rods or water crosses are disposed between fuel rods, and a value with a spring is disposed at the top of the coolant flow channel thereof, which opens a discharge port when pressure is increased to greater than a predetermined value. Further, a control element for the amount of coolant flow rate is inserted retractable to a control element guide tube formed at the lower portion of the water rod or the water cross. When the amount of control elements inserted to the control element guide tube is small and the inflown coolant flow rate is great, the void coefficient at the inside of the water rod is less than 5%. On the other hand, when the control elements are inserted, the flow resistance is increased, so that the void coefficient in the water rod is greater than 80%. When the pressure in the water rod is increased, the valve with the spring is raised to escape water or steams. Then, since the variation range of the change of the void coefficient can be controlled reliably by the amount of the control elements inserted, and nuclear fuel materials can be utilized effectively. (N.H.)

  14. Fuel assembly

    International Nuclear Information System (INIS)

    Hiraiwa, Koji; Ueda, Makoto

    1989-01-01

    In a fuel assembly used for a light water cooled reactor such as a BWR type reactor, a water rod is divided axially into an upper outer tube and a lower outer tube by means of a plug disposed from the lower end of a water rod to a position 1/4 - 1/2 of the entire length for the water rod. Inlet apertures and exit apertures for moderators are respectively perforated for the divided outer tube and upper and lower portions. Further, an upper inner tube with less neutron irradiation growing amount than the outer tube is perforated on the plug in the outer tube, while a lower inner tube with greater neutron irradiation growing amount than the outer tube is suspended from the lower surface of the plug in the outer tube. Then, the opening area for the exit apertures disposed to the upper outer tube and the lower outer tube is controlled depending on the difference of the neutron irradiation growing amount between the upper inner tube and the upper outer tube, and the difference of the neutron irradiation growing amount between the lower inner tube and the lower outer tube. This enables effective spectral shift operation and improve the fuel economy. (T.M.)

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Yamazaki, Hajime.

    1995-01-01

    In a fuel assembly having fuel rods of different length, fuel pellets of mixed oxides of uranium and plutonium are loaded to a short fuel rod. The volume ratio of a pellet-loaded portion to a plenum portion of the short fuel rod is made greater than the volume ratio of a fuel rod to which uranium fuel pellets are loaded. In addition, the volume of the plenum portion of the short fuel rod is set greater depending on the plutonium content in the loaded fuel pellets. MOX fuel pellets are loaded on the short fuel rods having a greater degree of freedom relevant to the setting for the volume of the plenum portion compared with that of a long rod fuel, and the volume of the plenum portion is ensured greater depending on the plutonium content. Even if a large amount of FP gas and He gas are discharged from the MOX fuels compared with that from the uranium fuels, the internal pressure of the MOX fuel rod during operation is maintained substantially identical with that of the uranium fuel rod, so that a risk of generating excess stresses applied to the fuel cladding tubes and rupture of fuels are greatly reduced. (N.H.)

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Nakajima, Akiyoshi; Bessho, Yasunori; Aoyama, Motoo; Koyama, Jun-ichi; Hirakawa, Hiromasa; Yamashita, Jun-ichi; Hayashi, Tatsuo

    1998-01-01

    In a fuel assembly of a BWR type reactor in which a water rod of a large diameter is disposed at the central portion, the cross sectional area perpendicular to the axial direction comprises a region a of a fuel rod group facing to a wide gap water region to which a control rod is inserted, a region b of a fuel rod group disposed on the side of the wide gap water region other than the region a, a region d of a fuel rod group facing to a narrow gap water region and a region c of a fuel rod group disposed on the side of the narrow gap water region other than the region d. When comparing an amount of fission products contained in the four regions relative to that in the entire regions and average enrichment degrees of fuel rods for the four regions, the relative amount and the average enrichment degree of the fuel rod group of the region a is minimized, and the relative amount and the average enrichment degree of the fuel rod group in the region b is maximized. Then, reactor shut down margin during cold operation can be improved while flattening the power in the cross section perpendicular to the axial direction. (N.H.)

  17. Emotion as Opportunity: Reflections on Multiple Concurrent ...

    African Journals Online (AJOL)

    Partner reduction has been shown to be one of the most important aspects of any programme that seeks to contain the spread of HIV. In South Africa, however, multiple concurrent sexual partnerships are a common feature of township life for young people, especially young men. Following on from XXXXX's (2009) study on ...

  18. Declarative interpretations of session-based concurrency

    DEFF Research Database (Denmark)

    Cano, Mauricio; Rueda, Camilo; López-Acosta, Hugo-Andrés

    2015-01-01

    Session-based concurrency is a type-based approach to the analysis of communication-intensive systems. Correct behavior in these systems may be specified in an operational or declarative style: the former defines how interactions are structured; the latter defines governing conditions...

  19. Integrated concurrent utilization quality review, Part one.

    Science.gov (United States)

    Caterinicchio, R P

    1987-01-01

    This article is the first of a two-part series which argues for the concurrent management of the appropriateness, necessity, and quality of patient care. Intensifying scrutiny by the credentialing groups, the PROs and all third-party payors underscores the vital need to implement cost-effective information systems which integrate the departmentalized functions of patient-physician profiling, DRG case-mix analyses, length of stay monitoring, pre-admission/admission and continued stay review, discharge planning, risk management, incident reporting and quality review. In the domain of physician performance regarding admitting and practice patterns, the ability to exercise concurrent utilization-quality review means early detection and prevention of events which would otherwise result in denials of payment and/or compromised patient care. Concurrent utilization-quality review must, by definition, be managerially invasive and focused; hence, it is integral to maintaining the integrity of the services and product lines offered by the provider. In fact, if PPO status is a marketing agenda, then the institutional objectives of cost-effectiveness, productivity, value, and competitiveness can only be achieved through concurrent utilization-quality review.

  20. An Evaluation of Concurrent Priority Queue Algorithms

    Science.gov (United States)

    1991-02-01

    path pronlem are testedi A! -S7 ?o An Evaluation of Concurrent Priority Queue Algorithms bv Qin Huang BS. Uiversity - of Science andi Technology of China...who have always supported me through my entire career and made my life more enjoyable. This research was supported in part by the Advanced Research

  1. Concurrent Engineering in seafood product development

    DEFF Research Database (Denmark)

    Jonsdottir, Stella; Vesterager, Johan; Børresen, Torger

    1998-01-01

    benefit from the CE approach which can support product developers to provide concurrent specifications for raw materials, ingredients, packaging, and production methods. The approach involves the use of product models from which line extensions are more easily generated than by use of customary stepwise...... techniques. it is anticipated that other food industries also can benefit from the more simultaneous approach...

  2. Concurrency meets probability: theory and practice (abstract)

    NARCIS (Netherlands)

    Katoen, Joost P.

    Treating random phenomena in concurrency theory has a long tradition. Petri nets [18, 10] and process algebras [14] have been extended with probabilities. The same applies to behavioural semantics such as strong and weak (bi)simulation [1], and testing pre-orders [5]. Beautiful connections between

  3. On run-time exploitation of concurrency

    NARCIS (Netherlands)

    Holzenspies, P.K.F.

    2010-01-01

    The `free' speed-up stemming from ever increasing processor speed is over. Performance increase in computer systems can now only be achieved through parallelism. One of the biggest challenges in computer science is how to map applications onto parallel computers. Concurrency, seen as the set of

  4. Concurrent Design of Embedded Control Software

    NARCIS (Netherlands)

    Groothuis, M.A.; Frijns, Raymond; Voeten, Jeroen; Broenink, Johannes F.; Margaria, T.; Padberg, J.; Taentzer, G.; Levendovszky, T.; Lengyel, L.; Karsai, G.; Hardebolle, C.

    2009-01-01

    Embedded software design for mechatronic systems is becoming an increasingly time-consuming and error-prone task. In order to cope with the heterogeneity and complexity, a systematic model-driven design approach is needed, where several parts of the system can be designed concurrently. There is

  5. Angelic semantics of fine-grained concurrency

    OpenAIRE

    Dan R. Ghica; Andrzej S. Murawski

    2008-01-01

    We introduce a game model for an Algol-like programming language with primitives for parallel composition and synchronization on semaphores. The semantics is based on a simplified version of Hyland–Ong-style games and it emphasizes the intuitive connection between the concurrent nature of games and that of computation. The model is fully abstract for may-equivalence.

  6. A body sensor platform for concurrent applications

    NARCIS (Netherlands)

    Bui, T.V.; Verhoeven, R.; Lukkien, J.J.

    2012-01-01

    This paper presents a Body Sensor Platform supporting concurrent applications that share resources and data. Concerns are application isolation, data privacy and platform trustworthiness in view of dynamic loading of applications. A prototype has been built on commercial-off-the-shelf hardware. The

  7. 29 CFR 502.17 - Concurrent actions.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Concurrent actions. 502.17 Section 502.17 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF THE IMMIGRATION...

  8. 29 CFR 501.17 - Concurrent actions.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Concurrent actions. 501.17 Section 501.17 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF THE IMMIGRATION...

  9. Concurrent analysis: towards generalisable qualitative research.

    Science.gov (United States)

    Snowden, Austyn; Martin, Colin R

    2011-10-01

    This study develops an original method of qualitative analysis coherent with its interpretivist principles. The objective is to increase the likelihood of achieving generalisability and so improve the chance of the findings being translated into practice. Good qualitative research depends on coherent analysis of different types of data. The limitations of existing methodologies are first discussed to justify the need for a novel approach. To illustrate this approach, primary evidence is presented using the new methodology. The primary evidence consists of a constructivist grounded theory of how mental health nurses with prescribing authority integrate prescribing into practice. This theory is built concurrently from interviews, reflective accounts and case study data from the literature. Concurrent analysis. Ten research articles and 13 semi-structured interviews were sampled purposively and then theoretically and analysed concurrently using constructivist grounded theory. A theory of the process of becoming competent in mental health nurse prescribing was generated through this process. This theory was validated by 32 practising mental health nurse prescribers as an accurate representation of their experience. The methodology generated a coherent and generalisable theory. It is therefore claimed that concurrent analysis engenders consistent and iterative treatment of different sources of qualitative data in a manageable manner. This process supports facilitation of the highest standard of qualitative research. Concurrent analysis removes the artificial delineation of relevant literature from other forms of constructed data. This gives researchers clear direction to treat qualitative data consistently raising the chances of generalisability of the findings. Raising the generalisability of qualitative research will increase its chances of informing clinical practice. © 2010 Blackwell Publishing Ltd.

  10. Self-assembled nanomaterials for photoacoustic imaging

    Science.gov (United States)

    Wang, Lei; Yang, Pei-Pei; Zhao, Xiao-Xiao; Wang, Hao

    2016-01-01

    In recent years, extensive endeavors have been paid to construct functional self-assembled nanomaterials for various applications such as catalysis, separation, energy and biomedicines. To date, different strategies have been developed for preparing nanomaterials with diversified structures and functionalities via fine tuning of self-assembled building blocks. In terms of biomedical applications, bioimaging technologies are urgently calling for high-efficient probes/contrast agents for high-performance bioimaging. Photoacoustic (PA) imaging is an emerging whole-body imaging modality offering high spatial resolution, deep penetration and high contrast in vivo. The self-assembled nanomaterials show high stability in vivo, specific tolerance to sterilization and prolonged half-life stability and desirable targeting properties, which is a kind of promising PA contrast agents for biomedical imaging. Herein, we focus on summarizing recent advances in smart self-assembled nanomaterials with NIR absorption as PA contrast agents for biomedical imaging. According to the preparation strategy of the contrast agents, the self-assembled nanomaterials are categorized into two groups, i.e., the ex situ and in situ self-assembled nanomaterials. The driving forces, assembly modes and regulation of PA properties of self-assembled nanomaterials and their applications for long-term imaging, enzyme activity detection and aggregation-induced retention (AIR) effect for diagnosis and therapy are emphasized. Finally, we conclude with an outlook towards future developments of self-assembled nanomaterials for PA imaging.

  11. Self-assembled nanomaterials for photoacoustic imaging.

    Science.gov (United States)

    Wang, Lei; Yang, Pei-Pei; Zhao, Xiao-Xiao; Wang, Hao

    2016-02-07

    In recent years, extensive endeavors have been paid to construct functional self-assembled nanomaterials for various applications such as catalysis, separation, energy and biomedicines. To date, different strategies have been developed for preparing nanomaterials with diversified structures and functionalities via fine tuning of self-assembled building blocks. In terms of biomedical applications, bioimaging technologies are urgently calling for high-efficient probes/contrast agents for high-performance bioimaging. Photoacoustic (PA) imaging is an emerging whole-body imaging modality offering high spatial resolution, deep penetration and high contrast in vivo. The self-assembled nanomaterials show high stability in vivo, specific tolerance to sterilization and prolonged half-life stability and desirable targeting properties, which is a kind of promising PA contrast agents for biomedical imaging. Herein, we focus on summarizing recent advances in smart self-assembled nanomaterials with NIR absorption as PA contrast agents for biomedical imaging. According to the preparation strategy of the contrast agents, the self-assembled nanomaterials are categorized into two groups, i.e., the ex situ and in situ self-assembled nanomaterials. The driving forces, assembly modes and regulation of PA properties of self-assembled nanomaterials and their applications for long-term imaging, enzyme activity detection and aggregation-induced retention (AIR) effect for diagnosis and therapy are emphasized. Finally, we conclude with an outlook towards future developments of self-assembled nanomaterials for PA imaging.

  12. Classifying and assembling two-dimensional X-ray laser diffraction patterns of a single particle to reconstruct the three-dimensional diffraction intensity function: resolution limit due to the quantum noise

    International Nuclear Information System (INIS)

    Tokuhisa, Atsushi; Taka, Junichiro; Kono, Hidetoshi; Go, Nobuhiro

    2012-01-01

    A new algorithm is developed for reconstructing the high-resolution three-dimensional diffraction intensity function of a globular biological macromolecule from many quantum-noise-limited two-dimensional X-ray laser diffraction patterns, each for an unknown orientation. The structural resolution is expressed as a function of the incident X-ray intensity and quantities characterizing the target molecule. A new two-step algorithm is developed for reconstructing the three-dimensional diffraction intensity of a globular biological macromolecule from many experimentally measured quantum-noise-limited two-dimensional X-ray laser diffraction patterns, each for an unknown orientation. The first step is classification of the two-dimensional patterns into groups according to the similarity of direction of the incident X-rays with respect to the molecule and an averaging within each group to reduce the noise. The second step is detection of common intersecting circles between the signal-enhanced two-dimensional patterns to identify their mutual location in the three-dimensional wavenumber space. The newly developed algorithm enables one to detect a signal for classification in noisy experimental photon-count data with as low as ∼0.1 photons per effective pixel. The wavenumber of such a limiting pixel determines the attainable structural resolution. From this fact, the resolution limit due to the quantum noise attainable by this new method of analysis as well as two important experimental parameters, the number of two-dimensional patterns to be measured (the load for the detector) and the number of pairs of two-dimensional patterns to be analysed (the load for the computer), are derived as a function of the incident X-ray intensity and quantities characterizing the target molecule

  13. Transactions Concurrency Control in Web Service Environment

    DEFF Research Database (Denmark)

    Alrifai, Mohammad; Dolog, Peter; Nejdl, Wolfgang

    2006-01-01

    an engineering point of view as it does not change the way consumers or clients of web services have to be programmed. Furthermore, it avoids direct communication between transaction coordinators which preserves security by keeping the information about business transactions restricted to the coordinators which......Business transactions in web service environments run with relaxed isolation and atomicity property. In such environments, transactions can commit and roll back independently on each other. Transaction management has to reflect this issue and address the problems which result for example from...... concurrent access to web service resources and data. In this paper we propose an extension to the WS-Transaction Protocol which ensures the consistency of the data when independent business transactions access the data concurrently under the relaxed transaction properties. Our extension is based...

  14. Authentic And Concurrent Evaluation-refining

    DEFF Research Database (Denmark)

    Eriksson, Carina Ihlström; Åkesson, Maria; Kautz, Karlheinz

    2011-01-01

    This paper addresses the need for more detailed accounts for evaluation in design science research literature. By revisiting a design project regarding the future e-newspaper we give detailed descriptions of its authentic and concurrent evaluation approach by illustrating the what, why and how...... of all evaluation activities throughout the whole project. The project produced seven different design artifacts that were evaluated. The utility and theoretical outcomes of the evaluation activities clearly influenced design decisions regarding newspaper design, user value and business model design...... as well as decisions on strategic levels. We emphasize a holistic and concurrent approach to evaluation compared to the general design science research thinking and argue that reflecting on how to seek authenticity is important. By authenticity we refer to the notion of how closely an evaluation captures...

  15. Micro-transactions for concurrent data structures

    DEFF Research Database (Denmark)

    Meawad, Fadi; Iyer, Karthik; Schoeberl, Martin

    2013-01-01

    implementation of transactional memory that we call micro-transactions. In particular, we argue that hardware support for micro-transactions allows us to efficiently implement certain data structures. Those data structures are difficult to realize with the atomic operations provided by stock hardware and provide......, atomic instructions, and micro-transactions. Our results suggest that transactional memory is an interesting alternative to traditional concurrency control mechanisms....

  16. Continuous Activity Monitoring During Concurrent Chemoradiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Ohri, Nitin, E-mail: ohri.nitin@gmail.com [Department of Radiation Oncology, Montefiore Medical Center, Albert Einstein College of Medicine, Bronx, New York (United States); Kabarriti, Rafi; Bodner, William R.; Mehta, Keyur J. [Department of Radiation Oncology, Montefiore Medical Center, Albert Einstein College of Medicine, Bronx, New York (United States); Shankar, Viswanathan [Department of Epidemiology and Population Health, Albert Einstein College of Medicine, Bronx, New York (United States); Halmos, Balazs; Haigentz, Missak [Department of Oncology, Montefiore Medical Center, Albert Einstein College of Medicine, Bronx, New York (United States); Rapkin, Bruce [Department of Epidemiology and Population Health, Albert Einstein College of Medicine, Bronx, New York (United States); Guha, Chandan; Kalnicki, Shalom; Garg, Madhur [Department of Radiation Oncology, Montefiore Medical Center, Albert Einstein College of Medicine, Bronx, New York (United States)

    2017-04-01

    Purpose: To perform a prospective trial testing the feasibility and utility of acquiring activity data as a measure of health status during concurrent chemoradiotherapy. Methods and Materials: Ambulatory patients who were planned for treatment with concurrent chemoradiotherapy with curative intent for cancers of the head and neck, lung, or gastrointestinal tract were provided with activity monitors before treatment initiation. Patients were asked to wear the devices continuously throughout the radiation therapy course. Step count data were downloaded weekly during radiation therapy and 2 and 4 weeks after radiation therapy completion. The primary objective was to demonstrate feasibility, defined as collection of step counts for 80% of the days during study subjects' radiation therapy courses. Secondary objectives included establishing step count as a dynamic predictor of unplanned hospitalization risk. Results: Thirty-eight enrolled patients were treated with concurrent chemoradiotherapy. Primary diagnoses included head and neck cancer (n=11), lung cancer (n=13), and a variety of gastrointestinal cancers (n=14). Step data were collected for 1524 of 1613 days (94%) during patients' radiation therapy courses. Fourteen patients were hospitalized during radiation therapy or within 4 weeks of radiation therapy completion. Cox regression modeling demonstrated a significant association between recent step counts (3-day average) and hospitalization risk, with a 38% reduction in the risk of hospitalization for every 1000 steps taken each day (hazard ratio 0.62, 95% confidence interval 0.46-0.83, P=.002). Inferior quality of life scores and impaired performance status were not associated with increased hospitalization risk. Conclusion: Continuous activity monitoring during concurrent chemoradiotherapy is feasible and well-tolerated. Step counts may serve as powerful, objective, and dynamic indicators of hospitalization risk.

  17. Using Molecular Biology to Maximize Concurrent Training

    OpenAIRE

    Baar, Keith

    2014-01-01

    Very few sports use only endurance or strength. Outside of running long distances on a flat surface and power-lifting, practically all sports require some combination of endurance and strength. Endurance and strength can be developed simultaneously to some degree. However, the development of a high level of endurance seems to prohibit the development or maintenance of muscle mass and strength. This interaction between endurance and strength is called the concurrent training effect. This revie...

  18. Continuous Activity Monitoring During Concurrent Chemoradiotherapy

    International Nuclear Information System (INIS)

    Ohri, Nitin; Kabarriti, Rafi; Bodner, William R.; Mehta, Keyur J.; Shankar, Viswanathan; Halmos, Balazs; Haigentz, Missak; Rapkin, Bruce; Guha, Chandan; Kalnicki, Shalom; Garg, Madhur

    2017-01-01

    Purpose: To perform a prospective trial testing the feasibility and utility of acquiring activity data as a measure of health status during concurrent chemoradiotherapy. Methods and Materials: Ambulatory patients who were planned for treatment with concurrent chemoradiotherapy with curative intent for cancers of the head and neck, lung, or gastrointestinal tract were provided with activity monitors before treatment initiation. Patients were asked to wear the devices continuously throughout the radiation therapy course. Step count data were downloaded weekly during radiation therapy and 2 and 4 weeks after radiation therapy completion. The primary objective was to demonstrate feasibility, defined as collection of step counts for 80% of the days during study subjects' radiation therapy courses. Secondary objectives included establishing step count as a dynamic predictor of unplanned hospitalization risk. Results: Thirty-eight enrolled patients were treated with concurrent chemoradiotherapy. Primary diagnoses included head and neck cancer (n=11), lung cancer (n=13), and a variety of gastrointestinal cancers (n=14). Step data were collected for 1524 of 1613 days (94%) during patients' radiation therapy courses. Fourteen patients were hospitalized during radiation therapy or within 4 weeks of radiation therapy completion. Cox regression modeling demonstrated a significant association between recent step counts (3-day average) and hospitalization risk, with a 38% reduction in the risk of hospitalization for every 1000 steps taken each day (hazard ratio 0.62, 95% confidence interval 0.46-0.83, P=.002). Inferior quality of life scores and impaired performance status were not associated with increased hospitalization risk. Conclusion: Continuous activity monitoring during concurrent chemoradiotherapy is feasible and well-tolerated. Step counts may serve as powerful, objective, and dynamic indicators of hospitalization risk.

  19. Concurrent semantics for structured design methods

    OpenAIRE

    Nixon, Patrick

    1996-01-01

    Also in Jelly, I., Gordon, I., & Groll, P. Software Engineering for Parallel and Distributed Systems. London: Chapman Hall. Design methods can be ambiguous due to di#11;erent interpretations of symbols or concepts. This paper presents a formal semantics for the Ward/Mellor Structured Analysis Method for Real Time systems. These semantics ensures that an unambiguous meaning can be attributed to a particular design. Speci#12;cally, it ensures that concurrent and real-time propert...

  20. Salivary gland function after concurrent chemoradiotherapy

    International Nuclear Information System (INIS)

    Ikeda, Kenichiro; Shimane, Toshikazu; Uzuki, Aya; Sugimoto, Akane; Mori, Tomoaki; Akiyama, Rio; Gomibuchi, Hiroshi; Kobayashi, Sei; Sanbe, Takeyuki

    2011-01-01

    Concurrent chemoradiotherapy for cancer of head and neck is becoming more and more prevalent. In fact, it is considered to better maintain quality of life (QOL) of patients than operative treatment in terms of preserving the functions, organs, and structures, but recently I seems that it does not maintain the QOL of patients better than operative treatment because its complications after therapy disturb daily life. We previously conducted a questionnaire survey that investigated the complications experienced by patients who received concurrent chemoradiotherapy, and reported that xerostomia was markedly reduced QOL in these patients. In this study, we divided patients who were exposed to radiation in both major salivary glands into two groups: 20 patients who received a 36 Gy dose of radiation (36 Gy group) and 15 patients who underwent radiation therapy alone at a dose of 40 Gy (radiotherapy (RT) group). The gum test was conducted with the following results (mean volume of saliva): 11.2 ml in the 36 Gy group, 6.0 ml in the RT group. There was no significant difference between the 36 Gy group and RT group. Our findings suggest that there is no significant difference in the extent of salivary gland dysfunction even after chemotherapy is carried out concurrently with radiotherapy. (author)

  1. Paclitaxel and concurrent radiation for gastric cancer

    International Nuclear Information System (INIS)

    Safran, Howard; Wanebo, Harry J.; Hesketh, Paul J.; Akerman, Paul; Ianitti, David; Cioffi, William; Di Petrillo, Thomas; Wolf, Brian; Koness, James; McAnaw, Robert; Moore, Todd; Chen, M.-H.; Radie-Keane, Kathy

    2000-01-01

    Purpose: To determine the activity and toxicity of paclitaxel and concurrent radiation for gastric cancer. Methods and Materials: Twenty-seven patients were studied. Twenty-five had proximal gastric cancers, two had distal cancers. Eight had esophageal extension, 6 had celiac adenopathy, and 7 had retroperitoneal adenopathy. Patients received paclitaxel, 50 mg/m 2 by 3-hour intravenous (IV) infusion, weekly, on days 1, 8, 15, 22, and 29. Radiation was administered concurrently to a total dose of 45.0 Gy, in 1.80 Gy fractions, for 25 treatments. Patients who were medically or surgically inoperable received a sixth week of paclitaxel with a radiation boost to 50.4 Gy. Results: Esophagitis and gastritis were the most important toxicities, Grade 3 in four patients (15%), and Grade 4 in three patients (11%). Five patients (19%) had Grade 3 nausea. The overall response rate was 56%, including three patients (11%) with a complete response. The 2-year progression-free and overall survival rates were 29% and 31%, respectively. Conclusion: Concurrent paclitaxel and radiation demonstrates substantial local-regional activity in gastric cancer. Future investigations combining paclitaxel and radiation with other local-regional and systemic treatments are warranted

  2. Managing Asynchronous Data in ATLAS's Concurrent Framework

    CERN Document Server

    Baines, John; The ATLAS collaboration

    2016-01-01

    In order to be able to make effective use of emerging hardware, where the amount of memory available to any CPU is rapidly decreasing as the core count continues to rise, ATLAS has begun a migration to a concurrent, multi-threaded software framework, known as AthenaMT. Significant progress has been made in implementing AthenaMT - we can currently run realistic Geant4 simulations on massively concurrent machines. the migration of realistic prototypes of reconstruction workflows is more difficult, given the large amounts of legacy code and the complexity and challenges of reconstruction software. These types of workflows, however, are the types that will most benefit from the memory reduction features of a multi-threaded framework. One of the challenges that we will report on in this paper is the re-design and implementation of several key asynchronous technologies whose behaviour is radically different in a concurrent environment than in a serial one, namely the management of Conditions data and the Detector D...

  3. Concurrent chemoradiotherapy for advanced esophageal cancer

    International Nuclear Information System (INIS)

    Shimizu, Wakako; Ogino, Takashi; Ishikura, Satoshi; Kawashima, Mitsuhiko; Ikeda, Hiroshi

    1997-01-01

    To investigate factors influencing response and survival for patients with squamous cell cancer of the esophagus. Forty-nine patients with squamous cell cancer of the esophagus, classified by guidelines for the clinical and pathologic studies on carcinoma of the esophagus published by the Japanese Society for Esophageal Disease, were treated by concurrent chemoradiotherapy using chemotherapy consisting of cisplatin and 5-fluorouracil with definitive irradiation of 60 Gy concurrently. Endoscopic findings and biopsy were used for evaluating the response. Nurse charts recording patient's feeding status were adopted to estimate severity of dysphagia. Complete response (CR) rate was 69.4%, median survival time (MST) was 12.3 months, and median local failure-free survival time 7.3 months. Patients in early stage (= 32.4 months, 20.4 months, 20.4 months, 15.7 months, respectively). Patients in A3 stage were often suffered from severe dysphagia both before and after treatment (81.5%, 70.4%), respectively. Concurrent chemoradiotherapy was effective treatment for esophageal cancer. Degree of dysphagia was considered to be a good prognosticator of patients' survival. (author)

  4. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  5. Resolution propositions

    International Nuclear Information System (INIS)

    2003-05-01

    To put a resolution to the meeting in relation with the use of weapons made of depleted uranium is the purpose of this text. The situation of the use of depleted uranium by France during the Gulf war and other recent conflicts will be established. This resolution will give the most strict recommendations face to the eventual sanitary and environmental risks in the use of these kind of weapons. (N.C.)

  6. Reliability and Concurrent Validity of the International Personality ...

    African Journals Online (AJOL)

    Reliability and Concurrent Validity of the International Personality item Pool (IPIP) Big-five Factor Markers in Nigeria. ... Nigerian Journal of Psychiatry ... Aims: The aim of this study was to assess the internal consistency and concurrent validity ...

  7. Preliminary Proceedings 15th International Workshop on Expressiveness in Concurrency

    DEFF Research Database (Denmark)

    The EXPRESS workshops aim at bringing together researchers interested in the relations between various formal systems, particularly in the field of Concurrency. More specifically, they focus on the comparison between programming concepts (such as concurrent, functional, imperative, logic and obje...

  8. Super-resolution biomolecular crystallography with low-resolution data.

    Science.gov (United States)

    Schröder, Gunnar F; Levitt, Michael; Brunger, Axel T

    2010-04-22

    X-ray diffraction plays a pivotal role in the understanding of biological systems by revealing atomic structures of proteins, nucleic acids and their complexes, with much recent interest in very large assemblies like the ribosome. As crystals of such large assemblies often diffract weakly (resolution worse than 4 A), we need methods that work at such low resolution. In macromolecular assemblies, some of the components may be known at high resolution, whereas others are unknown: current refinement methods fail as they require a high-resolution starting structure for the entire complex. Determining the structure of such complexes, which are often of key biological importance, should be possible in principle as the number of independent diffraction intensities at a resolution better than 5 A generally exceeds the number of degrees of freedom. Here we introduce a method that adds specific information from known homologous structures but allows global and local deformations of these homology models. Our approach uses the observation that local protein structure tends to be conserved as sequence and function evolve. Cross-validation with R(free) (the free R-factor) determines the optimum deformation and influence of the homology model. For test cases at 3.5-5 A resolution with known structures at high resolution, our method gives significant improvements over conventional refinement in the model as monitored by coordinate accuracy, the definition of secondary structure and the quality of electron density maps. For re-refinements of a representative set of 19 low-resolution crystal structures from the Protein Data Bank, we find similar improvements. Thus, a structure derived from low-resolution diffraction data can have quality similar to a high-resolution structure. Our method is applicable to the study of weakly diffracting crystals using X-ray micro-diffraction as well as data from new X-ray light sources. Use of homology information is not restricted to X

  9. Classifying and assembling two-dimensional X-ray laser diffraction patterns of a single particle to reconstruct the three-dimensional diffraction intensity function: resolution limit due to the quantum noise.

    Science.gov (United States)

    Tokuhisa, Atsushi; Taka, Junichiro; Kono, Hidetoshi; Go, Nobuhiro

    2012-05-01

    A new two-step algorithm is developed for reconstructing the three-dimensional diffraction intensity of a globular biological macromolecule from many experimentally measured quantum-noise-limited two-dimensional X-ray laser diffraction patterns, each for an unknown orientation. The first step is classification of the two-dimensional patterns into groups according to the similarity of direction of the incident X-rays with respect to the molecule and an averaging within each group to reduce the noise. The second step is detection of common intersecting circles between the signal-enhanced two-dimensional patterns to identify their mutual location in the three-dimensional wavenumber space. The newly developed algorithm enables one to detect a signal for classification in noisy experimental photon-count data with as low as ~0.1 photons per effective pixel. The wavenumber of such a limiting pixel determines the attainable structural resolution. From this fact, the resolution limit due to the quantum noise attainable by this new method of analysis as well as two important experimental parameters, the number of two-dimensional patterns to be measured (the load for the detector) and the number of pairs of two-dimensional patterns to be analysed (the load for the computer), are derived as a function of the incident X-ray intensity and quantities characterizing the target molecule. © 2012 International Union of Crystallography

  10. Concurrency and climate change signal in Scottish flooding

    Science.gov (United States)

    Harding, A. E.; Butler, A.; Goody, N.; Bertram, D.; Baggaley, N.; Tett, S. F.

    2013-12-01

    The Scottish Environment Protection Agency maintains a database of river gauging stations and intensity rain-gauges with a 3-hourly resolution that covers the majority of Scotland. Both SEPA and a number of other Scottish agencies are invested in climate change attribution in this data set. SEPA's main interest lies in trend detection and changes in river level (';stage') data throughout Scotland. Emergency response teams are more concerned with the concurrency of multiple flood events that might stretch their ability to respond effectively. Unfortunately, much of the rainfall signal within SEPA's river-gauge data is altered by land use changes, modified by artificial interventions such as reservoirs, compromised by tidal flow, or obscured by measurement issues. Data reduction techniques, indices of extreme rainfall, and hydrology-driven discrimination have been employed to produce a reduced set of flood-relevant information for 24-hour ';flashy' events. Links between this set and North Atlantic circulation have been explored, as have patterns of mutual occurrence across Scotland and location- and seasonally- dependent trends through time. Both frontal systems and summer convective storms have been characterised in terms of subsequent flood-inducing flow regime, their changing behaviour over the last fifty years, and their spatial extent. This is the first stage of an ongoing project that will intelligently expand to take less robust river and rain-gauge stations into account through statistical analysis and hydrological modelling. It is also the first study of its type to analyse a nation-scale dataset of both rainfall and river flow from multiple catchments for flood event concurrency. As rainfall events are expected to intensify across much of Europe, this kind of research is likely to have an increasing degree of relevance for policy-makers. This project demonstrates that productive, policy-relevant and mutually-rewarding partnerships are already underway.

  11. Multiscale Universal Interface: A concurrent framework for coupling heterogeneous solvers

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Yu-Hang, E-mail: yuhang_tang@brown.edu [Division of Applied Mathematics, Brown University, Providence, RI (United States); Kudo, Shuhei, E-mail: shuhei-kudo@outlook.jp [Graduate School of System Informatics, Kobe University, 1-1 Rokkodai-cho, Nada-ku, Kobe, 657-8501 (Japan); Bian, Xin, E-mail: xin_bian@brown.edu [Division of Applied Mathematics, Brown University, Providence, RI (United States); Li, Zhen, E-mail: zhen_li@brown.edu [Division of Applied Mathematics, Brown University, Providence, RI (United States); Karniadakis, George Em, E-mail: george_karniadakis@brown.edu [Division of Applied Mathematics, Brown University, Providence, RI (United States); Collaboratory on Mathematics for Mesoscopic Modeling of Materials, Pacific Northwest National Laboratory, Richland, WA 99354 (United States)

    2015-09-15

    Graphical abstract: - Abstract: Concurrently coupled numerical simulations using heterogeneous solvers are powerful tools for modeling multiscale phenomena. However, major modifications to existing codes are often required to enable such simulations, posing significant difficulties in practice. In this paper we present a C++ library, i.e. the Multiscale Universal Interface (MUI), which is capable of facilitating the coupling effort for a wide range of multiscale simulations. The library adopts a header-only form with minimal external dependency and hence can be easily dropped into existing codes. A data sampler concept is introduced, combined with a hybrid dynamic/static typing mechanism, to create an easily customizable framework for solver-independent data interpretation. The library integrates MPI MPMD support and an asynchronous communication protocol to handle inter-solver information exchange irrespective of the solvers' own MPI awareness. Template metaprogramming is heavily employed to simultaneously improve runtime performance and code flexibility. We validated the library by solving three different multiscale problems, which also serve to demonstrate the flexibility of the framework in handling heterogeneous models and solvers. In the first example, a Couette flow was simulated using two concurrently coupled Smoothed Particle Hydrodynamics (SPH) simulations of different spatial resolutions. In the second example, we coupled the deterministic SPH method with the stochastic Dissipative Particle Dynamics (DPD) method to study the effect of surface grafting on the hydrodynamics properties on the surface. In the third example, we consider conjugate heat transfer between a solid domain and a fluid domain by coupling the particle-based energy-conserving DPD (eDPD) method with the Finite Element Method (FEM)

  12. Criteria for assembly of in vivo measuring systems using high-resolution {gamma}-spectroscopy for evaluation of incorporated radionuclides; Kriterien zum Aufbau von In Vivo Messsystemen zur hochaufloesenden {gamma}-Spektrometrie inkorporierter Radionuklide

    Energy Technology Data Exchange (ETDEWEB)

    Wahl, W. [GSF Forschungszentrum fuer Umwelt und Gesundheit, Neuherberg (Germany). Inst. fuer Strahlenschutz

    1997-12-01

    The paper reviews the available, fundamental measuring methods relying on {gamma}-spectroscopy for their possible application in whole-body and partial-body counters for detection of manifold incorporation of radionuclides. Particular emphasis is placed on the response functions of various detectors, the assembly, the differentiated radioactivity distribution in the body, the various components of background activity and the corresponding suppression mechanisms, and possible ways of using the energy dependence for optimised detection of specific {gamma} energies in a given body region. Criteria and relations as well as their advantages and drawbacks are discussed. (orig./CB) [Deutsch] Diese Arbeit prueft die zur Verfuegung stehenden grundlegenden, {gamma}-spektroskopischen Messmethoden auf deren moegliche Anwendung im Spektrum der Ganz- und Teilkoerperzaehler zum Nachweis der mannigfach inkorporierten Radionuklide. Insbesondere wird eingegangen auf die Response Funktionen verschiedener Detektoren, die Anordnung, die differenzierte Aktivitaetsverteilung im Koerper, die verschiedenen Untergrundkomponenten und deren Unterdrueckungsmechanismen sowie die Beeinflussung durch die Energieabhaengigkeit zum optimalen Nachweis spezifischer {gamma}-Energien an einem bestimmten Ort am Koerper. Kriterien und Relationen sowie deren Vor- und Nachteile werden diskutiert. (orig.)

  13. Physical principles for DNA tile self-assembly.

    Science.gov (United States)

    Evans, Constantine G; Winfree, Erik

    2017-06-19

    DNA tiles provide a promising technique for assembling structures with nanoscale resolution through self-assembly by basic interactions rather than top-down assembly of individual structures. Tile systems can be programmed to grow based on logical rules, allowing for a small number of tile types to assemble large, complex assemblies that can retain nanoscale resolution. Such algorithmic systems can even assemble different structures using the same tiles, based on inputs that seed the growth. While programming and theoretical analysis of tile self-assembly often makes use of abstract logical models of growth, experimentally implemented systems are governed by nanoscale physical processes that can lead to very different behavior, more accurately modeled by taking into account the thermodynamics and kinetics of tile attachment and detachment in solution. This review discusses the relationships between more abstract and more physically realistic tile assembly models. A central concern is how consideration of model differences enables the design of tile systems that robustly exhibit the desired abstract behavior in realistic physical models and in experimental implementations. Conversely, we identify situations where self-assembly in abstract models can not be well-approximated by physically realistic models, putting constraints on physical relevance of the abstract models. To facilitate the discussion, we introduce a unified model of tile self-assembly that clarifies the relationships between several well-studied models in the literature. Throughout, we highlight open questions regarding the physical principles for DNA tile self-assembly.

  14. Concurrent paclitaxel and radiotherapy. Treatment feasibility studies

    International Nuclear Information System (INIS)

    Vogt, H.G.; Martin, T.; Kolotas, C.; Hey, S.; Schneider, L.; Templin, T.; Zamboglou, N.; Dornoff, W.; Kettner, H.

    1997-01-01

    Background: The anti-neoplastic effect of paclitaxel has been demonstrated in various clinical studies in different malignant diseases. Clinical studies have also demonstrated a greater efficacy for simultaneous radio-chemotherapy compared with radiotherapy alone when using radiosensitizing drugs. Based on these clinical and in-vitro data we initiated several pilot studies using paclitaxel as a radiosensitizing agent and we now present our initial experience in its use in a combined modality protocol, radiation and simultaneous chemotherapy with paclitaxel. Methods: I. Concurrent paclitaxel and radiation for locally advanced non-small-cell lung cancer (NSCLC): In a phase-I-study we applicated paclitaxel (45 to 65 mg/m 2 ) as a 3-hour infusion weekly for 3 to 7 weeks simultaneously with primary radiotherapy in shrinking field technique with 5x1.8 Gy/week up to 59.4 Gy. - II. Concurrent paclitaxel and radiation for breast cancer as neoadjuvant or palliative: 50 mg/m 2 paclitaxel as a 3-hour infusion weekly for 6 weeks simultaneous with neoadjuvant or palliative radiotherapy of the breast/chest wall with 5x1.8 Gy/week up to 54.0 Gy. - III./IV. Concurrent paclitaxel/carboplatin and combined radiation (EBRT+brachytherapy) for locally advanced inoperable cancer of the cervix: 50 mg/m 2 paclitaxel as a 3-hour infusion weekly for 5 weeks, 50 mg/m 2 carboplatin at day 1 to 5 in week 1 and 5 simultaneously with external beam radiotherapy of the pelvis with 5x1.8 Gy/week up to 54.0 Gy and endocavitary LDR-brachytherapy (4x5 Gy). - V. Concurrent paclitaxel and radiation for locally advanced inoperable cancer of the bladder: 50 mg/m 2 paclitaxel as a 3-hour infusion weekly for 5 weeks simultaneous with radiotherapy of the pelvis with 5x1.8 Gy/week up to 50.4 Gy. VI. Concurrent paclitaxel and radiation in locally advanced inoperable head and neck cancer: 50 mg/m 2 paclitaxel as a 3-hour infusion weekly for 7 to 8 weeks simultaneous with radiotherapy in shrinking field technique

  15. Concurrent conditional clustering of multiple networks: COCONETS.

    Directory of Open Access Journals (Sweden)

    Sabrina Kleessen

    Full Text Available The accumulation of high-throughput data from different experiments has facilitated the extraction of condition-specific networks over the same set of biological entities. Comparing and contrasting of such multiple biological networks is in the center of differential network biology, aiming at determining general and condition-specific responses captured in the network structure (i.e., included associations between the network components. We provide a novel way for comparison of multiple networks based on determining network clustering (i.e., partition into communities which is optimal across the set of networks with respect to a given cluster quality measure. To this end, we formulate the optimization-based problem of concurrent conditional clustering of multiple networks, termed COCONETS, based on the modularity. The solution to this problem is a clustering which depends on all considered networks and pinpoints their preserved substructures. We present theoretical results for special classes of networks to demonstrate the implications of conditionality captured by the COCONETS formulation. As the problem can be shown to be intractable, we extend an existing efficient greedy heuristic and applied it to determine concurrent conditional clusters on coexpression networks extracted from publically available time-resolved transcriptomics data of Escherichia coli under five stresses as well as on metabolite correlation networks from metabolomics data set from Arabidopsis thaliana exposed to eight environmental conditions. We demonstrate that the investigation of the differences between the clustering based on all networks with that obtained from a subset of networks can be used to quantify the specificity of biological responses. While a comparison of the Escherichia coli coexpression networks based on seminal properties does not pinpoint biologically relevant differences, the common network substructures extracted by COCONETS are supported by

  16. Microchannel plate assembly parameters with micron gaps

    International Nuclear Information System (INIS)

    Demchenkova, A.A.

    1987-01-01

    Performance of chevron microchannel plate assembly with 5 and 15 μm gaps between them has been investigated. The assembly is placed into a vacuum chamber under pressure -6 Torr and irradiated by neutral He and Ar atom beams with 1.5 and 3 keV energies as well as by ultraviolet photons with 147 nm wave length. Dependence of the gain and amplitude resolution on power voltage in plates are measured. The results obtained have shown that microchannel plates permit to obtain the gain up to 3x10 7 and amplitude resolution up to 30% when detecting both atomic particles and ultraviolet photons. The assembly can be effectively used in those cases when it is necessary to use microchannel plates with curved channels

  17. Relaxed Operational Semantics of Concurrent Programming Languages

    Directory of Open Access Journals (Sweden)

    Gustavo Petri

    2012-08-01

    Full Text Available We propose a novel, operational framework to formally describe the semantics of concurrent programs running within the context of a relaxed memory model. Our framework features a "temporary store" where the memory operations issued by the threads are recorded, in program order. A memory model then specifies the conditions under which a pending operation from this sequence is allowed to be globally performed, possibly out of order. The memory model also involves a "write grain," accounting for architectures where a thread may read a write that is not yet globally visible. Our formal model is supported by a software simulator, allowing us to run litmus tests in our semantics.

  18. Moments analysis of concurrent Poisson processes

    International Nuclear Information System (INIS)

    McBeth, G.W.; Cross, P.

    1975-01-01

    A moments analysis of concurrent Poisson processes has been carried out. Equations are given which relate combinations of distribution moments to sums of products involving the number of counts associated with the processes and the mean rate of the processes. Elimination of background is discussed and equations suitable for processing random radiation, parent-daughter pairs in the presence of background, and triple and double correlations in the presence of background are given. The theory of identification of the four principle radioactive series by moments analysis is discussed. (Auth.)

  19. Amplitude modulation detection with concurrent frequency modulation.

    Science.gov (United States)

    Nagaraj, Naveen K

    2016-09-01

    Human speech consists of concomitant temporal modulations in amplitude and frequency that are crucial for speech perception. In this study, amplitude modulation (AM) detection thresholds were measured for 550 and 5000 Hz carriers with and without concurrent frequency modulation (FM), at AM rates crucial for speech perception. Results indicate that adding 40 Hz FM interferes with AM detection, more so for 5000 Hz carrier and for frequency deviations exceeding the critical bandwidth of the carrier frequency. These findings suggest that future cochlear implant processors, encoding speech fine-structures may consider limiting the FM to narrow bandwidth and to low frequencies.

  20. Concurrency control in distributed database systems

    CERN Document Server

    Cellary, W; Gelenbe, E

    1989-01-01

    Distributed Database Systems (DDBS) may be defined as integrated database systems composed of autonomous local databases, geographically distributed and interconnected by a computer network.The purpose of this monograph is to present DDBS concurrency control algorithms and their related performance issues. The most recent results have been taken into consideration. A detailed analysis and selection of these results has been made so as to include those which will promote applications and progress in the field. The application of the methods and algorithms presented is not limited to DDBSs but a

  1. Proceedings of the Twenty-Eighth General Assembly Beijing 2012

    Science.gov (United States)

    Montmerle, Thierry

    2015-09-01

    Preface; 1. Inaugural ceremony; 2. Twenty-eighth General Assembly business sessions; 3. Closing ceremony; 4. Resolutions; 5. Report of Executive Committee, 2009-2012; 6. Reports on Division, Commission, and Working Group meetings; 7. Statutes, bye-laws, and working rules; 8. New members admitted at the General Assembly; 9. Divisions and their Commissions.

  2. Characterization of Semiconductor Nanocrystal Assemblies as Components of Optoelectronic Devices

    Science.gov (United States)

    Malfavon-Ochoa, Mario

    This dissertation presents new insight into the ability of small molecule passivated NCs to achieve intimate approach distances, despite being well passivated, while developing guiding principles in the area of ligand mediated microstructure control and the resulting macroscopic optical and electronic properties that close packing of high quality NCs enables. NC ligand coverage will be characterized quantitatively through thermogravimetric analysis (TGA), and qualitatively by photoluminescence and electroluminescence, in the case of functional devices; illustrating the importance of practitioner dependent control of ligand coverage through variations in the dispersion precipitation purification procedure. A unique examination of the relative contribution of energy and charge transfer in NC LEDs will demonstrate the ability to achieve charge transfer, at a level competitive with energy transfer, to well passivated NCs at various wt% loading in a polymer matrix. The observation of potential dependent recombination zones within an active layer further suggest novel, NC surface passivation mediated control of blend microstructure during solution processing towards the development of a bi-continuous network. Next, NC self-assembly and resulting microstructure dependent optical and electronic properties will be examined through electroluminescence and high-resolution transmission electron microscopy (TEM) micrographs of functional NC/polymer bulk heterojunction LEDs. The joint characterization of NC optical properties, and self-assembly microstructure provide a deeper understanding of the significant and inseparable effects of minimal changes in NC surface passivation on structure and function, and emphasize the potential to rely on strongly passivating ligands to control physical properties and processing parameters concurrently towards higher efficiency devices via low cost processing. Finally, micro-contact printing of blazed transmission gratings, using stable

  3. Plural beam electron gun assembly

    International Nuclear Information System (INIS)

    Stratton, M.G.

    1977-01-01

    The invention relates to a cathode ray tube plural-beam-in-line bi-potential electron gun assembly, having applied beam currents of differing levels, manifests structurally modified gun structures to effect focused beam landings at the screen that are evidenced as substantially equi-sized spots thereby providing improved resolution and brightness of the screen imagery. The structural changes embody modifications of the related focusing and accelerator electrodes of the respective guns to provide a partial telescoping arrangement for effecting the discrete placement, forming and shielding of the final focusing lenses. The three lenses so formed are in different planes in partial overlapping axial relationship

  4. USI A-43 resolution positions

    International Nuclear Information System (INIS)

    1983-04-01

    NUREG-0869 is comprised of the following documents: Proposed Regulatory Guide 1.82, Revision 1, Sump for Emergency Core Cooling and Containment Spray Systems; The Value-Impact Statement for USI A-43, Containment Emergency Sump Performance; and Background and Summary of Minutes of Meetings of the Committee to Review Generic Requirements Regarding Unresolved Safety Issue A-43 Resolution. The report has been assembled to facilitate obtaining for comment feedback on the position developed for resolution of USI A-43. There are no licensing requirements contained in NUREG-0869, and it should be clearly noted that this for comment report will not be used as interim requirements

  5. Fuel assembly guide tube

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1979-01-01

    This invention is directed toward a nuclear fuel assembly guide tube arrangement which restrains spacer grid movement due to coolant flow and which offers secondary means for supporting a fuel assembly during handling and transfer operations

  6. A concurrent multiscale micromorphic molecular dynamics

    International Nuclear Information System (INIS)

    Li, Shaofan; Tong, Qi

    2015-01-01

    In this work, we have derived a multiscale micromorphic molecular dynamics (MMMD) from first principle to extend the (Andersen)-Parrinello-Rahman molecular dynamics to mesoscale and continuum scale. The multiscale micromorphic molecular dynamics is a con-current three-scale dynamics that couples a fine scale molecular dynamics, a mesoscale micromorphic dynamics, and a macroscale nonlocal particle dynamics together. By choosing proper statistical closure conditions, we have shown that the original Andersen-Parrinello-Rahman molecular dynamics is the homogeneous and equilibrium case of the proposed multiscale micromorphic molecular dynamics. In specific, we have shown that the Andersen-Parrinello-Rahman molecular dynamics can be rigorously formulated and justified from first principle, and its general inhomogeneous case, i.e., the three scale con-current multiscale micromorphic molecular dynamics can take into account of macroscale continuum mechanics boundary condition without the limitation of atomistic boundary condition or periodic boundary conditions. The discovered multiscale scale structure and the corresponding multiscale dynamics reveal a seamless transition from atomistic scale to continuum scale and the intrinsic coupling mechanism among them based on first principle formulation

  7. Note on specifying and verifying concurrent processes

    Energy Technology Data Exchange (ETDEWEB)

    Holenderski, L.

    1984-02-28

    To represent sequential processes, sets of finite sequences of symbols from a finite alphabet are used in this approach, alphabet symbols denote events occurring when a process is being executed, a sequence of symbols is a record of one execution of the process, and a set of such sequences represents the process itself by combining all its possible executions together. Although this model turned out adequate for specifying concurrent processes and allows proving their properties, there are two reasons, at least, why this note takes the same subject up again. First, by analogy to shuffle and its closure, which express parallel combination and parallel iteration of non-interacting processes, there is a need for a similar operation describing the behaviour of interaction processes. A new extension of shuffle is proposed as a generalization. The closure of this operation provides a tool for specification of parallelly iterated processes. Moreover, the closure makes mutually recursive specification unnecessary. Second, when this model was used to prove properties of concurrent computations, only flow-of-control schemes were considered (thus, only some general properties were proved). When applied to concrete programs using variables that have values, such schemes had to be interpreted. In contrast to such a schematic approach, the usefulness of the same method for concrete programs is argued. This is shown using an example of a correctness proof of an implementation of unbounded semaphore by binary semaphores. 8 references.

  8. Polymer Directed Protein Assemblies

    NARCIS (Netherlands)

    van Rijn, Patrick

    2013-01-01

    Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e. g., virus particles. Viruses are a multi-protein assembly of which the morphology is

  9. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sasaki, Y.; Tashima, J.

    1975-01-01

    A description is given of nuclear reactor fuel assemblies arranged in the form of a lattice wherein there is attached to the interface of one of two adjacent fuel assemblies a plate spring having a concave portion curved toward said interface and to the interface of the other fuel assembly a plate spring having a convex portion curved away from said interface

  10. Concurrent Engineering Working Group White Paper Distributed Collaborative Design: The Next Step in Aerospace Concurrent Engineering

    Science.gov (United States)

    Hihn, Jairus; Chattopadhyay, Debarati; Karpati, Gabriel; McGuire, Melissa; Panek, John; Warfield, Keith; Borden, Chester

    2011-01-01

    As aerospace missions grow larger and more technically complex in the face of ever tighter budgets, it will become increasingly important to use concurrent engineering methods in the development of early conceptual designs because of their ability to facilitate rapid assessments and trades of performance, cost and schedule. To successfully accomplish these complex missions with limited funding, it is essential to effectively leverage the strengths of individuals and teams across government, industry, academia, and international agencies by increased cooperation between organizations. As a result, the existing concurrent engineering teams will need to increasingly engage in distributed collaborative concurrent design. The purpose of this white paper is to identify a near-term vision for the future of distributed collaborative concurrent engineering design for aerospace missions as well as discuss the challenges to achieving that vision. The white paper also documents the advantages of creating a working group to investigate how to engage the expertise of different teams in joint design sessions while enabling organizations to maintain their organizations competitive advantage.

  11. Sensor mount assemblies and sensor assemblies

    Science.gov (United States)

    Miller, David H [Redondo Beach, CA

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  12. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  13. Nuclear fuel string assembly

    International Nuclear Information System (INIS)

    Ip, A.K.; Koyanagi, K.; Tarasuk, W.R.

    1976-01-01

    A method of fabricating rodded fuels suitable for use in pressure tube type reactors and in pressure vessel type reactors is described. Fuel rods are secured as an inner and an outer sub-assembly, each rod attached between mounting rings secured to the rod ends. The two sub-assemblies are telescoped together and positioned by spaced thimbles located between them to provide precise positioning while permittng differential axial movement between the sub-assemblies. Such sub-assemblies are particularly suited for mounting as bundle strings. The method provides particular advantages in the assembly of annular-section fuel pins, which includes booster fuel containing enriched fuel material. (LL)

  14. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Marmonier, Pierre; Mesnage, Bernard; Nervi, J.C.

    1975-01-01

    This invention refers to fuel assemblies for a liquid metal cooled fast neutron reactor. Each assembly is composed of a hollow vertical casing, of regular polygonal section, containing a bundle of clad pins filled with a fissile or fertile substance. The casing is open at its upper end and has a cylindrical foot at its lower end for positioning the assembly in a housing provided in the horizontal diagrid, on which the core assembly rests. A set of flat bars located on the external surface of the casing enables it to be correctly orientated in its housing among the other core assemblies [fr

  15. Concurrent radiochemotherapy in advanced hypopharyngeal cancer

    Directory of Open Access Journals (Sweden)

    Lukarski Dusko

    2010-05-01

    Full Text Available Abstract Background Concurrent platinum-based radiochemotherapy has been recommended as a standard of care in patients with locally advanced squamous cell head and neck carcinomas. Unfortunately, there is a lack of level one evidence on best treatment approach for advanced hypopharyngeal cancer. This report aims to summarize the results of our study on concurrent radiochemotherapy in patients with advanced hypopharyngeal cancer. Methods A retrospective analysis of 41 patients with stage III-IV hypopharyngeal cancer was performed. All patients were treated with three dimensional conformal radiotherapy and received 70 Gy in 35 fractions (2 Gy per fraction, 5 fractions per week. In dependence of the period when radiotherapy was realized, two different treatment techniques were used. Concurrent chemotherapy consisted of cisplatin 30 mg/m2 given on a weekly basis. Results The median age was 52 years (range 29-70. Stage IV disease was recognized in 73.2% of the patients. Complete response rates at the primary site and at the metastatic neck lymph nodes were 68.3% and 36.6%, respectively. A complete composite response was present in 27 patients (65.9%. Median follow-up was 13 months (range 7-36. Distant metastases as initial failure occurred in 7 patients (46.7%. The 2-year local relapse-free survival and regional relapse-free survival rates were 55.2% and 75.8%, respectively. The 2-year locoregional relapse-free survival rate was 51.3%. The 2-year disease-free survival and overall survival rates were 29.3% and 32.8%, respectively. Confluent mucositis was developed in 46.3% of patients. Leucopenia grade 1 was the most frequent hematological toxicity. The median weight loss at the end of treatment was 12% (range 5-21. The worst grade of late toxicity was most commonly pronounced in the skin and in the subcutaneous tissue. Conclusions Based on unsatisfactory results in our study we suggest that the use of sequential radiochemotherapy or chemotherapy

  16. Concurrent chemoradiation for unresectable pancreatic cancer

    International Nuclear Information System (INIS)

    Kim, Yong Bae; Seong, Jin Sil; Song, Si Young; Park, Seung Woo; Suh, Chang Ok

    2002-01-01

    To analyze the treatment results of concurrent chemoradiation with oral 5-FU plus Gemcitabine or Paclitaxel for unresectable pancreatic cancer. The patients, who were diagnosed by imaging modalities or by explo-laparotomy were treated with concurrent chemoradiation. Radiotherapy was delivered to primary tumor and regional lymph nodes, and the total dose was 45 Gy. Patients received Gemcitabine 1,000 mg/m 2 or Paclitaxel 50 mg/m 2 weekly and oral 5-FU daily. The total number of cycles of chemotherapy ranged from 1 to 39 (median, 11 cycles). The follow-up period ranged from 6 to 36 months. Survival was analyzed using the Kaplan-Meier method. Fifty-four patients between Jan. 1999 to Nov. 2001 were included in this study. Forty-two patients who completed the planned treatment were included in this analysis. The patients' age ranged from 37 to 73 years (median, 60 years) and the male to female ratio was 30:12. Treatment was interrupted for 12 patients due to; disease progression for 6 (50%), poor performance status for 4 (33.3%), intercurrent disease for 1 (8.3%), and refusal for 1 (8.3%). Response evaluation was possible for 40 patients. One patient gained complete remission and 24 patients gained partial remission, hence the response rate was 59%. The survival rates were 46.7% and 17.0% at 1 year and 2 years, respectively with a median survival time of 12 months. Patients treated with Paclitaxel showed superior outcomes compared to those patients treated with Gemcitabine, in terms of both response rate and survival rate although this difference was not statistically significant. Grade III or IV hematologic toxicity was shown in 8 patients (19%), while grade III or IV non-hematologic toxicity was shown in 5 patients (12%). Concurrent chemoradiation with oral 5-FU and Gemcitabine or Paclitaxel improves both the response rate and survival rate in patients with unresectable pancreatic cancer. A prospective study should be investigated in order to improve both the patient

  17. Chicago classification criteria of esophageal motility disorders defined in high resolution esophageal pressure topography

    NARCIS (Netherlands)

    Bredenoord, A. J.; Fox, M.; Kahrilas, P. J.; Pandolfino, J. E.; Schwizer, W.; Smout, A. J. P. M.; Conklin, Jeffrey L.; Cook, Ian J.; Gyawali, C. Prakash; Hebbard, Geoffrey; Holloway, Richard H.; Ke, Meiyun; Keller, Jutta; Mittal, Ravinder K.; Peters, Jeff; Richter, Joel; Roman, Sabine; Rommel, Nathalie; Sifrim, Daniel; Tutuian, Radu; Valdovinos, Miguel; Vela, Marcelo F.; Zerbib, Frank

    2012-01-01

    Background The Chicago Classification of esophageal motility was developed to facilitate the interpretation of clinical high resolution esophageal pressure topography (EPT) studies, concurrent with the widespread adoption of this technology into clinical practice. The Chicago Classification has been

  18. Distributed Management of Concurrent Web Service Transactions

    DEFF Research Database (Denmark)

    Alrifai, Mohammad; Dolog, Peter; Balke, Wolf-Tilo

    2009-01-01

    Business processes involve dynamic compositions of interleaved tasks. Therefore, ensuring reliable transactional processing of Web services is crucial for the success of Web service-based B2B and B2C applications. But the inherent autonomy and heterogeneity of Web services render the applicability...... of conventional ACID transaction models for Web services far from being straightforward. Current Web service transaction models relax the isolation property and rely on compensation mechanisms to ensure atomicity of business transactions in the presence of service failures. However, ensuring consistency...... in the open and dynamic environment of Web services, where interleaving business transactions enter and exit the system independently, remains an open issue. In this paper, we address this problem and propose an architecture that supports concurrency control on the Web services level. An extension...

  19. Concurrent hypokalemic periodic paralysis and bipolar disorder

    Directory of Open Access Journals (Sweden)

    Chia-Lin Lin

    2015-01-01

    Full Text Available Primary periodic paralysis is a rare autosomal dominant disorder of ion-channel dysfunction, manifested by episodic flaccid paresis secondary to abnormal sarcolemma excitability. Membrane destabilization involving Na, K-ATPase has been hypothesized to be a biological etiology of the bipolar disorder (BD and the mechanisms underlying lithium therapy have been linked to it. To date, there has been only one reported case of BD comorbid with periodic paralysis. Herein, we reported another case of concurrent bipolar mania and hypokalemic periodic paralysis (HPP, one special form of periodic paralysis. Consistent with the previous case, our patient responded well to lithium treatment for both bipolar mania and HPP. This might provide some support to the hypothesis that the therapeutic effects of lithium in both BD and HPP could be due to the correction of the underlying common pathophysiology.

  20. High bandwidth concurrent processing on commodity platforms

    CERN Document Server

    Boosten, M; Van der Stok, P D V

    1999-01-01

    The I/O bandwidth and real-time processing power required for high- energy physics experiments is increasing rapidly over time. The current requirements can only be met by using large-scale concurrent processing. We are investigating the use of a large PC cluster interconnected by Fast and Gigabit Ethernet to meet the performance requirements of the ATLAS second level trigger. This architecture is attractive because of its performance and competitive pricing. A major problem is obtaining frequent high-bandwidth I/O without sacrificing the CPU's processing power. We present a tight integration of a user-level scheduler and a zero-copy communication layer. This system closely approaches the performance of the underlying hardware in terms of both CPU power and I/O capacity. (0 refs).

  1. Current operations and experiments at the Tritium Systems Test Assembly

    International Nuclear Information System (INIS)

    Bartlit, J.R.; Anderson, J.L.

    1985-01-01

    The Tritium Systems Test Assembly (TSTA) has continued to move toward operation of a fully-integrated, full-sized, computer-controlled fusion fuel processing loop. Concurrent, nonloop experiments have answered important questions on new components and issues such as palladium diffusion membranes, ceramic electrolysis cells, regenerable tritium getters, laser Raman spectroscopy, unregenerable tritium inventory on molecular sieves, tritium contamination problems and decontamination methods, and operating data on reliability, emissions, doses, and wastes generated. 4 refs., 2 figs

  2. Erlang Programming A Concurrent Approach to Software Development

    CERN Document Server

    Cesarini, Francesco

    2009-01-01

    This book offers you an in-depth explanation of Erlang, a programming language ideal for any situation where concurrency, fault-tolerance, and fast response is essential. You'll learn how to write complex concurrent programs in this language, regardless of your programming background or experience. Erlang Programming focuses on the language's syntax and semantics, and explains pattern matching, proper lists, recursion, debugging, networking, and concurrency, with exercises at the end of each chapter.

  3. A Highly Concurrent Replicated Data Structure EAI Endorsed Transactions

    Directory of Open Access Journals (Sweden)

    Mumtaz Ahmad

    2015-12-01

    Full Text Available Well defined concurrent replicated data structure is very important to design collaborative editing system, particularly, certain properties like out-of-order execution of concurrent operations and data convergence. In this paper, we introduce novel linear data structure based on unique identifier scheme required for indexed communication. These identifiers are real numbers holding specific pattern of precision. Based on the uniqueness and the total order of these identifiers, here, we present two concurrency control techniques to achieve high degree of concurrency according to strong and lazy happened-before relations. Our data structure preserves data convergence, yields better performance and avoids overheads as compared to existing approaches.

  4. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  5. Fuel assembly storage pool

    International Nuclear Information System (INIS)

    Hiranuma, Hiroshi.

    1976-01-01

    Object: To remove limitation of the number of storage of fuel assemblies to increase the number of storage thereof so as to relatively reduce the water depth required for shielding radioactive rays. Structure: Fuel assembly storage rack containers for receiving a plurality of spent fuel assembly racks are stacked in multi-layer fashion within a storage pool filled with water for shielding radioactive rays and removing heat. (Furukawa, Y.)

  6. Localization-based super-resolution imaging of cellular structures.

    Science.gov (United States)

    Kanchanawong, Pakorn; Waterman, Clare M

    2013-01-01

    Fluorescence microscopy allows direct visualization of fluorescently tagged proteins within cells. However, the spatial resolution of conventional fluorescence microscopes is limited by diffraction to ~250 nm, prompting the development of super-resolution microscopy which offers resolution approaching the scale of single proteins, i.e., ~20 nm. Here, we describe protocols for single molecule localization-based super-resolution imaging, using focal adhesion proteins as an example and employing either photoswitchable fluorophores or photoactivatable fluorescent proteins. These protocols should also be easily adaptable to imaging a broad array of macromolecular assemblies in cells whose components can be fluorescently tagged and assemble into high density structures.

  7. Target Assembly Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Target Assembly Facility integrates new armor concepts into actual armored vehicles. Featuring the capability ofmachining and cutting radioactive materials, it...

  8. Composite turbine bucket assembly

    Science.gov (United States)

    Liotta, Gary Charles; Garcia-Crespo, Andres

    2014-05-20

    A composite turbine blade assembly includes a ceramic blade including an airfoil portion, a shank portion and an attachment portion; and a transition assembly adapted to attach the ceramic blade to a turbine disk or rotor, the transition assembly including first and second transition components clamped together, trapping said ceramic airfoil therebetween. Interior surfaces of the first and second transition portions are formed to mate with the shank portion and the attachment portion of the ceramic blade, and exterior surfaces of said first and second transition components are formed to include an attachment feature enabling the transition assembly to be attached to the turbine rotor or disk.

  9. Concurrent applicative implementations of nondeterministic algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Salter, R

    1983-01-01

    The author introduces a methodology for utilizing concurrency in place of backtracking in the implementation of nondeterministic algorithms. This is achieved in an applicative setting through the use of the Friedman-Wise multiprogramming primitive frons, and a paradigm which views the action of nondeterministic algorithms as one of data structure construction. The element by element nondeterminism arising from a linearized search is replaced by a control structure which is oriented towards constructing sets of partial computations. This point of view is facilitated by the use of suspensions, which allow control disciplines to be embodied in the form of conceptual data structures that in reality manifest themselves only for purposes of control. He applies this methodology to the class of problems usually solved through the use of simple backtracking (e.g. 'eight queens'), and to a problem presented by Lindstrom (1979) to illustrate the use of coroutine controlled backtracking, to produce backtrack-free solutions. The solution to the latter illustrates the coroutine capability of suspended structures, but also demonstrates a need for further investigations into resolving problems of process communication in applicative languages. 14 references.

  10. Creatine and Caffeine: Considerations for Concurrent Supplementation.

    Science.gov (United States)

    Trexler, Eric T; Smith-Ryan, Abbie E

    2015-12-01

    Nutritional supplementation is a common practice among athletes, with creatine and caffeine among the most commonly used ergogenic aids. Hundreds of studies have investigated the ergogenic potential of creatine supplementation, with consistent improvements in strength and power reported for exercise bouts of short duration (≤ 30 s) and high intensity. Caffeine has been shown to improve endurance exercise performance, but results are mixed in the context of strength and sprint performance. Further, there is conflicting evidence from studies comparing the ergogenic effects of coffee and caffeine anhydrous supplementation. Previous research has identified independent mechanisms by which creatine and caffeine may improve strength and sprint performance, leading to the formulation of multi-ingredient supplements containing both ingredients. Although scarce, research has suggested that caffeine ingestion may blunt the ergogenic effect of creatine. While a pharmacokinetic interaction is unlikely, authors have suggested that this effect may be explained by opposing effects on muscle relaxation time or gastrointestinal side effects from simultaneous consumption. The current review aims to evaluate the ergogenic potential of creatine and caffeine in the context of high-intensity exercise. Research directly comparing coffee and caffeine anhydrous is discussed, along with previous studies evaluating the concurrent supplementation of creatine and caffeine.

  11. Concurrent Oxytocin in Women Needing Second Dinoprostone

    International Nuclear Information System (INIS)

    Sher, Z.; Ashraf, M.; Irum, N.; Bashir, S.; Khaliq, N.; Yaqub, S.

    2015-01-01

    Objective: To reduce average induction delivery internal in patients with poor Bishop score without compromising fetomaternal outcome (in terms of birth weight, NICU admission, maternal complications and mode of delivery). Study Design: A descriptive study. Place and Duration of Study: Department of Obstetrics and Gynaecology, Pakistan Atomic Energy Commission (PAEC) General Hospital, Islamabad, from February to December 2009. Methodology: All patients needing 2nd dinoprostone pessary for induction of labour were included in the study. Patients with gestation below 37 weeks, those with intra-uterine growth restriction, bad obstetric history, previous uterine scar and patients in whom Bishop score improved for amniotomy after 1st dinoprostone pessary, were excluded. Data was collected on a special proforma where all variables were defined. Results:Out of 90 patients, 44 (48.8 percentage) had spontaneous vertex deliveries and 12 (13.3 percentage) had instrumental deliveries so a total vaginal deliveries occurred in 56 (62.2 percentage) patients. Thirty four patients (37.8 percentage) had emergency caesarean sections. Main indication for cesarean was failure to progress in 1st stage of labour followed by fetal distress. There were 3 failed inductions. Only 2 patients had hyperstimulation. NICU admission were 8 and all babies were discharged healthy from nursery with no case of early neonatal death. Conclusion:Concurrent oxytocin with 2nd dinoprostone in patients with poor Bishop scores (initial scores 2 and 3) resulted in more vaginal birth and comparatively shorter induction delivery time with almost negligible fetomaternal complications. (author)

  12. 39 CFR 273.7 - Concurrence of Attorney General.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Concurrence of Attorney General. 273.7 Section 273... PROGRAM FRAUD CIVIL REMEDIES ACT § 273.7 Concurrence of Attorney General. (a) The Attorney General is... the Attorney General or his designee approves such action in a written statement which specifies: (1...

  13. Transactions on Petri Nets and Other Models of Concurrency V

    DEFF Research Database (Denmark)

    submission track of ToPNoC. The 12 papers cover a diverse range of topics including model checking and system verification, synthesis, foundational work on specific classes of Petri nets, and innovative applications of Petri nets and other models of concurrency. Thus, this volume gives a good view of ongoing...... concurrent systems and Petri nets research...

  14. Gender asymmetry in concurrent partnerships and HIV prevalence

    NARCIS (Netherlands)

    Leung, Ka Yin; Powers, Kimberly A.; Kretzschmar, Mirjam

    The structure of the sexual network of a population plays an essential role in the transmission of HIV. Concurrent partnerships, i.e. partnerships that overlap in time, are important in determining this network structure. Men and women may differ in their concurrent behavior, e.g. in the case of

  15. Gender asymmetry in concurrent partnerships and HIV prevalence

    NARCIS (Netherlands)

    Leung, Ka Yin; Powers, Kimberly A.; Kretzschmar, Mirjam

    2017-01-01

    The structure of the sexual network of a population plays an essential role in the transmission of HIV. Concurrent partnerships, i.e. partnerships that overlap in time, are important in determining this network structure. Men and women may differ in their concurrent behavior, e.g. in the case of

  16. Dynamic Frames Based Verification Method for Concurrent Java Programs

    NARCIS (Netherlands)

    Mostowski, Wojciech

    2016-01-01

    In this paper we discuss a verification method for concurrent Java programs based on the concept of dynamic frames. We build on our earlier work that proposes a new, symbolic permission system for concurrent reasoning and we provide the following new contributions. First, we describe our approach

  17. Association of HIV prevalence and concurrency of sexual ...

    African Journals Online (AJOL)

    Association of HIV prevalence and concurrency of sexual partnerships in South Africa's language groups: An ecological analysis. C Kenyon. Abstract. Background. There is considerable variation in HIV prevalence between different language groups in South Africa (SA). Sexual partner concurrency has been linked to the ...

  18. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Delafosse, Jacques.

    1977-01-01

    This invention relates to a nuclear fuel assembly for a light or heavy water reactor, or for a fast reactor of the kind with a bundle of cladded pins, maintained parallel to each other in a regular network by an assembly of separate supporting grids, fitted with elastic bearing surfaces on these pins [fr

  19. Assembling Transgender Moments

    Science.gov (United States)

    Greteman, Adam J.

    2017-01-01

    In this article, the author seeks to assemble moments--scholarly, popular, and aesthetic--in order to explore the possibilities that emerge as moments collect in education's encounters with the needs, struggles, and possibilities of transgender lives and practices. Assembling moments, the author argues, illustrates the value of "moments"…

  20. Vertical pump assembly

    International Nuclear Information System (INIS)

    Dohnal, M.; Rosel, J.; Skarka, V.

    1988-01-01

    The mounting is described of the drive assembly of a vertical pump for nuclear power plants in areas with seismic risk. The assembly is attached to the building floor using flexible and damping elements. The design allows producing seismically resistant pumps without major design changes in the existing types of vertical pumps. (E.S.). 1 fig

  1. Fuel Assembly Damping Summary

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kanghee; Kang, Heungseok; Oh, Dongseok; Yoon, Kyungho; Kim, Hyungkyu; Kim, Jaeyong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    This paper summary the fuel assembly damping data in air/in still water/under flow, released from foreign fuel vendors, compared our data with the published data. Some technical issues in fuel assembly damping measurement testing are also briefly discussed. Understanding of each fuel assembly damping mechanisms according to the surrounding medium and flow velocity can support the fuel design improvement in fuel assembly dynamics and structural integrity aspect. Because the upgraded requirements of the newly-developed advanced reactor system will demands to minimize fuel design margin in integrity evaluation, reduction in conservatism of fuel assembly damping can contribute to alleviate the fuel design margin for sure. Damping is an energy dissipation mechanism in a vibrating mechanical structure and prevents a resonant structure from having infinite vibration amplitudes. The sources of fuel assembly damping are various from support friction to flow contribution, and it can be increased by the viscosity or drag of surrounding fluid medium or the average velocity of water flowing. Fuel licensing requires fuel design evaluation in transient or accidental condition. Dynamic response analysis of fuel assembly is to show fuel integrity and requires information on assembly-wise damping in dry condition and under wet or water flowing condition. However, damping measurement test for the full-scale fuel assembly prototype is not easy to carry out because of the scale (fuel prototype, test facility), unsteadiness of test data (scattering, random sampling and processing), instrumentation under water flowing (water-proof response measurement), and noise. LWR fuel technology division in KAERI is preparing the infra structure for damping measurement test of full-scale fuel assembly, to support fuel industries and related research activities. Here is a preliminary summary of fuel assembly damping, published in the literature. Some technical issues in fuel assembly damping

  2. Self-assembled nanostructures

    CERN Document Server

    Zhang, Jin Z; Liu, Jun; Chen, Shaowei; Liu, Gang-yu

    2003-01-01

    Nanostructures refer to materials that have relevant dimensions on the nanometer length scales and reside in the mesoscopic regime between isolated atoms and molecules in bulk matter. These materials have unique physical properties that are distinctly different from bulk materials. Self-Assembled Nanostructures provides systematic coverage of basic nanomaterials science including materials assembly and synthesis, characterization, and application. Suitable for both beginners and experts, it balances the chemistry aspects of nanomaterials with physical principles. It also highlights nanomaterial-based architectures including assembled or self-assembled systems. Filled with in-depth discussion of important applications of nano-architectures as well as potential applications ranging from physical to chemical and biological systems, Self-Assembled Nanostructures is the essential reference or text for scientists involved with nanostructures.

  3. Concurrent Electroconvulsive Therapy and Bupropion Treatment.

    Science.gov (United States)

    Takala, Christopher R; Leung, Jonathan G; Murphy, Lauren L; Geske, Jennifer R; Palmer, Brian A

    2017-09-01

    Bupropion is associated with a dose-dependent increased risk of seizures. Use of concomitant bupropion and electroconvulsive therapy (ECT) remains controversial because of an increased risk of prolonged seizures. This is the first systematic evaluation of the effect of bupropion on ECT. A case group (n = 119), patients treated with concomitant ECT and bupropion, was compared with an age and gender frequency-matched control group (n = 261), treated with only ECT. Electroconvulsive therapy treatment data including seizure length, number of treatments, and concurrent medications were extracted. Longitudinal mixed models examined ECT versus ECT + bupropion group differences over the course of treatments measured by seizure duration (electroencephalogram [EEG] and motor). Multivariable models examined the total number of treatments and first and last seizure duration. All models considered group differences with ECT treatment measures adjusted for age, gender, benzodiazepine treatment, lead placement, and setting. Electroconvulsive therapy treatment with bupropion led to shorter motor seizure duration (0.047) and EEG seizure duration (P = 0.001). The number of ECT treatments (7.3 vs 7.0 treatments; P = 0.23), respectively, or the probability of a prolonged seizure (P = 0.15) was not significantly different. Benzodiazepine use was significantly more common in control subjects (P = 0.01). This is a retrospective analysis limited in part by unavailable variables (seizure threshold, nature of EEG and motor seizure monitoring, type of ECT device, dosing and formulation of bupropion, and duration of the current depressive illness). This study revealed a significantly shorter duration in seizure length with ECT + concomitant bupropion, but not in the number of required treatments in those treated compared with ECT without bupropion. There remains a critical need to reevaluate the efficacy of concomitant use of psychotropic medications + ECT.

  4. Rhabdomyolysis resulting in concurrent Horner's syndrome and brachial plexopathy: a case report.

    Science.gov (United States)

    Lee, Susan C; Geannette, Christian; Wolfe, Scott W; Feinberg, Joseph H; Sneag, Darryl B

    2017-08-01

    This case report describes a 29-year-old male who presented with immediate onset of Horner's syndrome and ipsilateral brachial plexopathy after sleeping with his arm dangling outside a car window for 8 h. Outside workup and imaging revealed rhabdomyolysis of the left neck musculature. Subsequent electrodiagnostic testing and high-resolution brachial plexus magnetic resonance imaging at the authors' institution attributed the Horner's syndrome and concurrent brachial plexopathy to rhabdomyolysis of the longus colli and scalene musculature, which had compressed-and consequently scar tethered-the cervical sympathetic trunk and brachial plexus. This case of co-existent Horner's syndrome and brachial plexopathy demonstrates the role of high-resolution brachial plexus MRI in diagnosing plexopathy and the importance of being familiar with plexus and paravertebral muscle anatomy.

  5. Rhabdomyolysis resulting in concurrent Horner's syndrome and brachial plexopathy: a case report

    International Nuclear Information System (INIS)

    Lee, Susan C.; Geannette, Christian; Sneag, Darryl B.; Wolfe, Scott W.; Feinberg, Joseph H.

    2017-01-01

    This case report describes a 29-year-old male who presented with immediate onset of Horner's syndrome and ipsilateral brachial plexopathy after sleeping with his arm dangling outside a car window for 8 h. Outside workup and imaging revealed rhabdomyolysis of the left neck musculature. Subsequent electrodiagnostic testing and high-resolution brachial plexus magnetic resonance imaging at the authors' institution attributed the Horner's syndrome and concurrent brachial plexopathy to rhabdomyolysis of the longus colli and scalene musculature, which had compressed - and consequently scar tethered - the cervical sympathetic trunk and brachial plexus. This case of co-existent Horner's syndrome and brachial plexopathy demonstrates the role of high-resolution brachial plexus MRI in diagnosing plexopathy and the importance of being familiar with plexus and paravertebral muscle anatomy. (orig.)

  6. Rhabdomyolysis resulting in concurrent Horner's syndrome and brachial plexopathy: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Susan C.; Geannette, Christian; Sneag, Darryl B. [Hospital for Special Surgery, Department of Radiology and Imaging, New York, NY (United States); Wolfe, Scott W. [Hospital for Special Surgery, Hand and Upper Extremity, Department of Orthopedics, New York, NY (United States); Feinberg, Joseph H. [Hospital for Special Surgery, Physical Medicine and Rehabilitation, New York, NY (United States)

    2017-08-15

    This case report describes a 29-year-old male who presented with immediate onset of Horner's syndrome and ipsilateral brachial plexopathy after sleeping with his arm dangling outside a car window for 8 h. Outside workup and imaging revealed rhabdomyolysis of the left neck musculature. Subsequent electrodiagnostic testing and high-resolution brachial plexus magnetic resonance imaging at the authors' institution attributed the Horner's syndrome and concurrent brachial plexopathy to rhabdomyolysis of the longus colli and scalene musculature, which had compressed - and consequently scar tethered - the cervical sympathetic trunk and brachial plexus. This case of co-existent Horner's syndrome and brachial plexopathy demonstrates the role of high-resolution brachial plexus MRI in diagnosing plexopathy and the importance of being familiar with plexus and paravertebral muscle anatomy. (orig.)

  7. TPX assembly plan

    International Nuclear Information System (INIS)

    Knutson, D.

    1993-01-01

    The TPX machine will be assembled in the TFTR Test Cell at the Plasma Physics Laboratory, utilizing the existing TFTR machine foundation. Preparation of the area for assembly will begin after completion of the decontamination and decommissioning phase on TFTR and certification that the radiation levels remaining, if any, are consistent with the types of operations planned. Assembly operations begin with the arrival of the first components, and conclude, approximately 24 months later, with the successful completion of the integrated systems tests and the achievement of a first plasma

  8. Nuclear reactor control assembly

    International Nuclear Information System (INIS)

    Negron, S.B.

    1991-01-01

    This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other

  9. Data-centric concurrency control on the java programming language

    OpenAIRE

    Parreira, Daniel Luis Landeiroto

    2013-01-01

    Dissertação para obtenção do Grau de Mestre em Engenharia Informática The multi-core paradigm has propelled shared-memory concurrent programming to an important role in software development. Its use is however limited by the constructs that provide a layer of abstraction for synchronizing access to shared resources. Reasoning with these constructs is not trivial due to their concurrent nature. Data-races and deadlocks occur in concurrent programs, encumbering the programmer and furth...

  10. A Concurrent Distributed System for Aircraft Tactical Decision Generation

    Science.gov (United States)

    McManus, John W.

    1990-01-01

    A research program investigating the use of artificial intelligence (AI) techniques to aid in the development of a Tactical Decision Generator (TDG) for Within Visual Range (WVR) air combat engagements is discussed. The application of AI programming and problem solving methods in the development and implementation of a concurrent version of the Computerized Logic For Air-to-Air Warfare Simulations (CLAWS) program, a second generation TDG, is presented. Concurrent computing environments and programming approaches are discussed and the design and performance of a prototype concurrent TDG system are presented.

  11. CONCURRENT VALIDITY OF THE STUDENT TEACHER PROFESSIONAL IDENTITY SCALE

    Directory of Open Access Journals (Sweden)

    Predrag Živković

    2018-04-01

    Full Text Available The main purpose of study was to examine concurrent validity of the Student Teachers Professional Identity Scale–STPIS (Fisherman and Abbot, 1998 that was for the first time used in Serbia. Indicators of concurrent validity was established by correlation with student teacher self-reported well-being, self-esteem, burnout stress and resilience. Based on the results we can conclude that the STPIS meets the criterion of concurrent validity. The implications of these results are important for researchers and decisions makers in teacher education

  12. Computational simulation of concurrent engineering for aerospace propulsion systems

    Science.gov (United States)

    Chamis, C. C.; Singhal, S. N.

    1992-01-01

    Results are summarized of an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulations methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties - fundamental in developing such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering for propulsion systems and systems in general. Benefits and facets needing early attention in the development are outlined.

  13. Computational simulation for concurrent engineering of aerospace propulsion systems

    Science.gov (United States)

    Chamis, C. C.; Singhal, S. N.

    1993-01-01

    Results are summarized for an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulation methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties--fundamental to develop such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering of propulsion systems and systems in general. Benefits and issues needing early attention in the development are outlined.

  14. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1980-01-01

    A bimetallic spacer means is cooperatively associated with a nuclear fuel assembly and operative to resist the occurrence of in-reactor bowing of the nuclear fuel assembly. The bimetallic spacer means in one embodiment of the invention includes a space grid formed, at least principally, of zircaloy to the external surface of which are attached a plurality of stainless steel strips. In another embodiment the strips are attached to fuel pins. In each of the embodiments, the stainless steel strips during power production expand outwardly to a greater extent than do the members to which the stainless steel strips are attached, thereby forming stiff springs which abut against like bimetallic spacer means with which the other nuclear fuel assemblies are provided in a given nuclear reactor core to thus prevent the occurrence of in-reactor bowing of the nuclear fuel assemblies. (author)

  15. Fuel assembly spacer

    International Nuclear Information System (INIS)

    Shirakawa, Ken-etsu.

    1988-01-01

    Purpose: To reduce the pressure loss of coolants by fuel assembly spacers. Constitution: Spacers for supporting a fuel assembly are attached by means of a plurality of wires to an outer frame. The outer frame is made of shape memory alloy such that the wires are caused to slacken at normal temperature and the slacking of the wires is eliminated in excess of the transition temperature. Since the wires slacken at the normal temperature, fuel rods can be inserted easily. After the insertion of the fuel rods, when the entire portion or the outer frame is heated by water or gas at a predetermined temperature, the outer frame resumes its previously memorized shape to tighten the wires and, accordingly, the fuel rods can be supported firmly. In this way, since the fuel rods are inserted in the slacken state of the wires and, after the assembling, the outer frame resumes its memorized shape, the assembling work can be conducted efficiently. (Kamimura, M.)

  16. Nuclear reactor spacer assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1979-01-01

    A fuel assembly for a nuclear reactor is disclosed wherein the fuel element receiving and supporting grid is comprised of a first metal, the guide tubes which pass through the grid assembly are comprised of a second metal and the grid is supported on the guide tubes by means of expanded sleeves located intermediate the grid and guide tubes. The fuel assembly is fabricated by inserting the sleeves, of initial outer diameter commensurate with the guide tube outer diameters, through the holes in the grid assembly provided for the guide tubes and thereafter expanding the sleeves radially outwardly along their entire length such that the guide tubes can subsequently be passed through the sleeves. The step of radial expansion, as a result of windows provided in the sleeves having dimensions commensurate with the geometry of the grid, mechanically captures the grid and simultaneously preloads the sleeve against the grid whereby relative motion between the grid and guide tube will be precluded

  17. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Vikhorev, Yu.V.; Biryukov, G.I.; Kirilyuk, N.A.; Lobanov, V.N.

    1977-01-01

    A fuel assembly is proposed for nuclear reactors allowing remote replacement of control rod bundles or their shifting from one assembly to another, i.e., their multipurpose use. This leads to a significant increase in fuel assembly usability. In the fuel assembly the control rod bundle is placed in guide tube channels to which baffles are attached for fuel element spacing. The remote handling of control rods is provided by a hollow cylinder with openings in its lower bottom through which the control rods pass. All control rods in a bundle are mounted to a cross beam which in turn is mounted in the cylinder and is designed for grasping the whole rod bundle by a remotely controlled telescopic mechanism in bundle replacement or shifting. (Z.M.)

  18. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Betten, P.R.

    1976-01-01

    Under the invention the fuel assembly is particularly suitable for liquid metal cooled fast neutron breeder reactors. Hence, according to the invention a fuel assembly cladding includes inward corrugations with respect to the remainder of the cladding according to a recurring pattern determined by the pitch of the metal wire helically wound round the fuel rods of the assembly. The parts of the cladding pressed inwards correspond to the areas in which the wire encircling the peripheral fuel rods is generally located apart from the cladding, thereby reducing the play between the cladding and the peripheral fuel rods situated in these areas. The reduction in the play in turn improves the coolant flow in the internal secondary channels of the fuel assembly to the detriment of the flow in the peripheral secondary channels and thereby establishes a better coolant fluid temperature profile [fr

  19. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sakurai, Shungo; Ogiya, Shunsuke.

    1990-01-01

    In a fuel assembly, if the entire fuels comprise mixed oxide fuels, reactivity change in cold temperature-power operation is increased to worsen the reactor shutdown margin. The reactor shutdown margin has been improved by increasing the burnable poison concentration thereby reducing the reactivity of the fuel assembly. However, since unburnt poisons are present at the completion of the reactor operation, the reactivity can not be utilized effectively to bring about economical disadvantage. In view of the above, the reactivity change between lower temperature-power operations is reduced by providing a non-boiling range with more than 9.1% of cross sectional area at the inside of a channel at the central portion of the fuel assembly. As a result, the amount of the unburnt burnable poisons is decreased, the economy of fuel assembly is improved and the reactor shutdown margin can be increase. (N.H.)

  20. A case for evaluating sensor network protocols concurrently

    KAUST Repository

    Gnawali, Omprakash; Guibas, Leonidas; Levis, Philip

    2010-01-01

    Researchers typically evaluate and compare protocols on the testbeds by running them one at a time. This methodology ignores the variation in link qualities and wireless environment across these experiments. These variations can introduce significant noise in the results. Evaluating two protocols concurrently, however, suffers from inter-protocol interactions. These interactions can perturb performance even under very light load, especially timing and timing sensitive protocols. We argue that the benefits of running protocols concurrently greatly outweigh the disadvantages. Protocols rarely run in isolation in real networks, and so considering such interactions is valuable. Although the wireless environment is still uncontrolled, concurrent evaluations make comparisons fair and more statistically sound. Through experiments on two testbeds, we make the case for evaluating and comparing low data-rate sensor network protocols by running them concurrently. Copyright 2010 ACM.

  1. Concurrency-Induced Transitions in Epidemic Dynamics on Temporal Networks.

    Science.gov (United States)

    Onaga, Tomokatsu; Gleeson, James P; Masuda, Naoki

    2017-09-08

    Social contact networks underlying epidemic processes in humans and animals are highly dynamic. The spreading of infections on such temporal networks can differ dramatically from spreading on static networks. We theoretically investigate the effects of concurrency, the number of neighbors that a node has at a given time point, on the epidemic threshold in the stochastic susceptible-infected-susceptible dynamics on temporal network models. We show that network dynamics can suppress epidemics (i.e., yield a higher epidemic threshold) when the node's concurrency is low, but can also enhance epidemics when the concurrency is high. We analytically determine different phases of this concurrency-induced transition, and confirm our results with numerical simulations.

  2. Concurrency-Induced Transitions in Epidemic Dynamics on Temporal Networks

    Science.gov (United States)

    Onaga, Tomokatsu; Gleeson, James P.; Masuda, Naoki

    2017-09-01

    Social contact networks underlying epidemic processes in humans and animals are highly dynamic. The spreading of infections on such temporal networks can differ dramatically from spreading on static networks. We theoretically investigate the effects of concurrency, the number of neighbors that a node has at a given time point, on the epidemic threshold in the stochastic susceptible-infected-susceptible dynamics on temporal network models. We show that network dynamics can suppress epidemics (i.e., yield a higher epidemic threshold) when the node's concurrency is low, but can also enhance epidemics when the concurrency is high. We analytically determine different phases of this concurrency-induced transition, and confirm our results with numerical simulations.

  3. A Concurrent Multiple Negotiation Protocol Based on Colored Petri Nets.

    Science.gov (United States)

    Niu, Lei; Ren, Fenghui; Zhang, Minjie; Bai, Quan

    2017-11-01

    Concurrent multiple negotiation (CMN) provides a mechanism for an agent to simultaneously conduct more than one negotiation. There may exist different interdependency relationships among these negotiations and these interdependency relationships can impact the outcomes of these negotiations. The outcomes of these concurrent negotiations contribute together for the agent to achieve an overall negotiation goal. Handling a CMN while considering interdependency relationships among multiple negotiations is a challenging research problem. This paper: 1) comprehensively highlights research problems of negotiations at concurrent negotiation level; 2) provides a graph-based CMN model with consideration of the interdependency relationships; and 3) proposes a colored Petri net-based negotiation protocol for conducting CMNs. With the proposed protocol, a CMN can be efficiently and concurrently processed and negotiation agreements can be efficiently achieved. Experimental results indicate the effectiveness and efficiency of the proposed protocol in terms of the negotiation success rate, the negotiation time and the negotiation outcome.

  4. Concurrent control system for the JAERI tandem accelerator

    International Nuclear Information System (INIS)

    Hanashima, Susumu; Shozi, Tokio; Shiozaki, Yasuo; Saito, Motoi; Oogane, Yasuo; Sekiguchi, Satoshi.

    1994-01-01

    A new control system for the JAERI tandem accelerator is constructed. The system utilizes concurrent processing technology with multiprocessor. Transputers are used both for central processor and I/O front end processors. (author)

  5. Love, lust and the emotional context of multiple and concurrent ...

    African Journals Online (AJOL)

    Love, lust and the emotional context of multiple and concurrent sexual partnerships among young Swazi adults. Allison Ruark, Lunga Dlamini, Nonhlanhla Mazibuko, Edward C Green, Caitlin Kennedy, Amy Nunn, Timothy Flanigan, Pamela J Surkan ...

  6. Partial Orders and Fully Abstract Models for Concurrency

    DEFF Research Database (Denmark)

    Engberg, Uffe Henrik

    1990-01-01

    In this thesis sets of labelled partial orders are employed as fundamental mathematical entities for modelling nondeterministic and concurrent processes thereby obtaining so-called noninterleaving semantics. Based on different closures of sets of labelled partial orders, simple algebraic language...

  7. Poverty and sexual concurrency: a case study of STI risk.

    Science.gov (United States)

    Tsui, Emma K; Leonard, Lori; Lenoir, Chavonne; Ellen, Jonathan M

    2008-08-01

    This paper is about sexual concurrency, or maintaining multiple sexual partnerships that overlap in time. Sexual concurrency is a concept that is used in the field of public health to explain the spread of sexually transmitted diseases. Sexual concurrency has also been proposed as a site of intervention to reduce sexually transmitted infection (STI) rates, particularly among those populations who carry the heaviest STI burden: adolescents and African Americans. In this paper, we use ethnographic data collected from a group of African American adolescents living in Baltimore to examine the socially produced configurations of risks and relationships that are obscured by the term sexual concurrency. The data we present show the limits of this concept, and suggest that structural reforms, including improvements to education, drug treatment, and work opportunities, are necessary to reduce racial disparities in STI rates.

  8. Prototyping of concurrent control systems implemented in FPGA devices

    CERN Document Server

    Wiśniewski, Remigiusz

    2017-01-01

    This book focuses on prototyping aspects of concurrent control systems and their further implementation and partial reconfiguration in programmable devices. Further, it lays out a full prototyping flow for concurrent control systems. Based on a given primary specification, a system is described with an interpreted Petri net, which naturally reflects the concurrent and sequential relationships of the design. The book shows that, apart from the traditional option of static configuration of the entire system, the latest programmable devices (especially FPGAs) offer far more sophistication. Partial reconfiguration allows selected parts of the system to be replaced without having to reprogram the entire structure of the device. Approaches to dynamic and static partial reconfiguration of concurrent control systems are presented and described in detail.< The theoretical work is illustrated by examples drawn from various applications, with a milling machine and a traffic-light controller highlighted as representat...

  9. Service-Oriented Synthesis of Distributed and Concurrent Protocol Specifications

    Directory of Open Access Journals (Sweden)

    Jehad Al Dallal

    2008-01-01

    Full Text Available Several methods have been proposed for synthesizing computer communication protocol specifications from service specifications. Some protocol synthesis methods based on the finite state machine (FSM model assume that primitives in the service specifications cannot be executed simultaneously. Others either handle only controlled primitive concurrency or have tight restrictions on the applicable FSM topologies. As a result, these synthesis methods are not applicable to an interesting variety of inherently concurrent applications, such as the Internet and mobile communication systems. This paper proposes a concurrent-based protocol synthesis method that eliminates the restrictions imposed by the earlier methods. The proposed method uses a synthesis method to obtain a sequential protocol specification (P-SPEC from a given service specification (S-SPEC. The resulting P-SPEC is then remodeled to consider the concurrency behavior specified in the S-SPEC, while guaranteeing that P-SPEC provides the specified service.

  10. Reliability and concurrent validity of an alternative method of lateral ...

    African Journals Online (AJOL)

    1 University of Northern Iowa, Division of Athletic Training, 003C Human. Performance Center, Cedar ... concurrent validity of the fingertip-to-floor distance test (FFD) ... in these protocols are spinal and extremity range of motion, pelvic control ...

  11. Context Aware Concurrent Execution Framework for Web Browser

    DEFF Research Database (Denmark)

    Saeed, Aamir; Erbad, Aiman Mahmood; Olsen, Rasmus Løvenstein

    Computing hungry multimedia web applications need to efficiently utilize the device resources. HTML5 web workers is a non-sharing concurrency platform that enables multimedia web application to utilize the available multi-core hardware. HTML5 web workers are implemented by major browser vendors...... to facilitate concurrent execution in web clients and enhance the quality of ambitious web applications. The concurrent execution in web workers allows parallel processing using available cores at the expense of communication overhead and extra computation. The benefits of concurrent execution can be maximized...... by balancing load across workers/CPU cores. This work presents load-balancing algorithms between web workers using parameters such as scheduler throughput, computation priority and game entity locality. An award-winning web-based multimedia game (raptjs.com) is used to test the performance of the load balance...

  12. Fuel assembly reconstitution

    International Nuclear Information System (INIS)

    Morgado, Mario M.; Oliveira, Monica G.N.; Ferreira Junior, Decio B.M.; Santos, Barbara O. dos; Santos, Jorge E. dos

    2009-01-01

    Fuel failures have been happened in Nuclear Power Plants worldwide, without lost of integrity and safety, mainly for the public, environment and power plants workers. The most common causes of these events are corrosion (CRUD), fretting and pellet cladding interaction. These failures are identified by increasing the activity of fission products, verified by chemical analyses of reactor coolant. Through these analyses, during the fourth operation cycle of Angra 2 Nuclear Power Plant, was possible to observe fuel failure indication. This indication was confirmed in the end of the cycle during the unloading of reactor core through leakage tests of fuel assembly, using the equipment called 'In Mast Sipping' and 'Box Sipping'. After confirmed, the fuel assembly reconstitution was scheduled, and happened in April, 2007, where was identified the cause and the fuel rod failure, which was substitute by dummy rods (zircaloy). The cause was fretting by 'debris'. The actions to avoid and prevent fuel assemblies failures are important. The goals of this work are to describe the methodology of fuel assembly reconstitution using the FARE (Fuel Assembly Reconstitution Equipment) system, to describe the results of this task in economic and security factors of the company and show how the fuel assembly failures are identified during operation and during the outage. (author)

  13. Polymer Directed Protein Assemblies

    Directory of Open Access Journals (Sweden)

    Patrick van Rijn

    2013-05-01

    Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

  14. Silver sulfide nanoparticle assembly obtained by reacting an assembled silver nanoparticle template with hydrogen sulfide gas.

    Science.gov (United States)

    Chen, Rui; Nuhfer, Noel T; Moussa, Laura; Morris, Hannah R; Whitmore, Paul M

    2008-11-12

    A fast, simple procedure is described for obtaining an assembly of silver sulfide nanoparticles (Ag(2)S NPs) on a glass substrate through reaction of a template of an assembled layer of silver nanoparticles (Ag NPs) with hydrogen sulfide (H(2)S) gas. The Ag NP template was prepared by assembling a monolayer of spherical Ag NPs (mean diameter of 7.4 nm) on a polyethylenimine-treated glass substrate. Exposure to pure H(2)S for 10 min converted the Ag NPs of the template to Ag(2)S NPs. The resulting Ag(2)S NP assembly, which retains the template nanostructure and particle distribution, was characterized by optical absorption spectroscopy, atomic force microscopy, transmission electron microscopy (TEM), scanning high resolution TEM, energy dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy. The Ag(2)S NPs have a crystal structure of monoclinic acanthite, and while they retained the spherical shape of the original Ag NPs, their mean particle size increased to 8.4 nm due to changes to the crystal structure when the Ag NPs are converted into Ag(2)S NPs. The measured optical absorption edge of the Ag(2)S NP assembly indicated an indirect interband transition with a band gap energy of 1.71 eV. The Ag(2)S NP assembly absorbed light with wavelengths below 725 nm, and the absorbance increased monotonically toward the UV region.

  15. Concurrent engineering solution for the design of ship and offshore bracket parts and fabrication process

    Directory of Open Access Journals (Sweden)

    Tae-Won Kim

    2013-09-01

    Full Text Available Brackets in ships and offshore structures are added structures that can endure stress concentrations. In this study, a concurrent engineering solution was proposed, and a high strength low carbon cast steel alloy applicable to offshore structures was designed and developed. The yield strength and ultimate tensile strength of the designed steel were 480 and 600 MPa, respectively. The carbon equivalent of the steel was 0.446 with a weld crack susceptibility index of 0.219. The optimal structural design of the brackets for offshore structures was evaluated using ANSYS commercial software. The possibility of replacing an assembly of conventional built-up brackets with a single casting bulb bracket was verified. The casting process was simulated using MAGMAsoft commercial software, and a casting fabrication process was designed. For the proposed bulb bracket, it was possible to reduce the size and weight by approximately 30% and 50%, respectively, compared to the conventional type of bracket.

  16. Reference Capabilities for Trait Based Reuse and Concurrency Control

    OpenAIRE

    Castegren, Elias; Wrigstad, Tobias

    2016-01-01

    The proliferation of shared mutable state in object-orientedprogramming complicates software development as two seeminglyunrelated operations may interact via an alias and produceunexpected results. In concurrent programming this manifestsitself as data-races. Concurrent object-oriented programming further suffers from thefact that code that warrants synchronisation cannot easily bedistinguished from code that does not. The burden is placed solelyon the programmer to reason about alias freedo...

  17. Concurrent object-oriented programming: The MP-Eiffel approach

    OpenAIRE

    Silva, Miguel Augusto Mendes Oliveira e

    2004-01-01

    This article evaluates several possible approaches for integrating concurrency into object-oriented programming languages, presenting afterwards, a new language named MP-Eiffel. MP-Eiffel was designed attempting to include all the essential properties of both concurrent and object-oriented programming with simplicity and safety. A special care was taken to achieve the orthogonality of all the language mechanisms, allowing their joint use without unsafe side-effects (such as inh...

  18. Time concurrency/phase-time synchronization in digital communications networks

    Science.gov (United States)

    Kihara, Masami; Imaoka, Atsushi

    1990-01-01

    Digital communications networks have the intrinsic capability of time synchronization which makes it possible for networks to supply time signals to some applications and services. A practical estimation method for the time concurrency on terrestrial networks is presented. By using this method, time concurrency capability of the Nippon Telegraph and Telephone Corporation (NTT) digital communications network is estimated to be better than 300 ns rms at an advanced level, and 20 ns rms at final level.

  19. An Automation-Assisted Empirical Study on Lock Usage for Concurrent Programs

    OpenAIRE

    Xin Rui; Qi Zhengwei; Huang Shiqiu; Xiang Chengcheng; Zheng Yudi; Wang Yin; Guan Haibing

    2013-01-01

    Nowadays concurrent programs are becoming more and more important with the development of hardware and network technologies. However it is not easy for programmers to write reliable concurrent programs. Concurrency characteristics such as thread interleaving make it difficult to debug or maintain concurrent programs. Although there are lots of research work on concurrency such as multi thread testing tools concurrent program verification and data race detection all of them leave open problems...

  20. Concurrent eruptions at Etna, Stromboli, and Vulcano: casualty or causality?

    Directory of Open Access Journals (Sweden)

    R. Funiciello

    2008-06-01

    Full Text Available Anecdotes of concurrent eruptions at Etna, Stromboli, and Vulcano (Southern Italy have persisted for more than 2000 years and volcanologists in recent and past times have hypothesized a causal link among these volcanoes. Here this hypothesis is tested. To introduce the problem and provide examples of the type of expected volcanic phenomena, narratives of the most notable examples of concurrent eruptions are provided. Then the frequency of eruptions at each individual volcano is analysed for about the last 300 years and the expected probability of concurrent eruptions is calculated to compare it to the observed probability. Results show that the occurrence of concurrent eruptions is often more frequent than a random probability, particularly for the Stromboli-Vulcano pair. These results are integrated with a statistical analysis of the earthquake catalogue to find evidence of linked seismicity in the Etnean and Aeolian areas. Results suggest a moderate incidence of non-random concurrent eruptions, but available data are temporally limited and do not allow an unequivocal identification of plausible triggers; our results, however, are the first attempt to quantify a more-than-2000-years-old curious observation and constitute a starting point for more sophisticated analyses of new data in the future. We look forward to our prediction of a moderate incidence of concurrent eruptions being confirmed or refuted with the passage of time and occurrence of new events.

  1. Risk factors for concurrent bacteremia in adult patients with dengue.

    Science.gov (United States)

    Thein, Tun-Linn; Ng, Ee-Ling; Yeang, Ming S; Leo, Yee-Sin; Lye, David C

    2017-06-01

    Bacteremia in dengue may occur with common exposure to pathogens in association with severe organ impairment or severe dengue, which may result in death. Cohort studies identifying risk factors for concurrent bacteremia among patients with dengue are rare. We conducted a retrospective case-control study of adult patients with dengue who were admitted to the Department of Infectious Diseases at Tan Tock Seng Hospital, Singapore from 2004 to 2008. For each case of dengue with concurrent bacteremia (within the first 72 hours of admission), we selected four controls without bacteremia, who were matched on year of infection and dengue confirmation method. Conditional logistic regression was performed to identify risk factors for concurrent bacteremia. Among 9,553 patients with dengue, 29 (0.3%) had bacteremia. Eighteen of these patients (62.1%) had concurrent bacteremia. The predominant bacteria were Staphylococcus aureus, one of which was a methicillin-resistant strain. Dengue shock syndrome occurred more frequently and hospital stay was longer among cases than among controls. Three cases did not survive, whereas none of the controls died. In multivariate analysis, being critically ill at hospital presentation was independently associated with 15 times the likelihood of a patient with dengue having concurrent bacteremia. Concurrent bacteremia in adult patients with dengue is uncommon but presents atypically and results in more deaths and longer hospital stay. Given the associated mortality, collection of blood cultures and empiric antibiotic therapy may be considered in patients who are critically ill. Copyright © 2015. Published by Elsevier B.V.

  2. Human Assisted Assembly Processes

    Energy Technology Data Exchange (ETDEWEB)

    CALTON,TERRI L.; PETERS,RALPH R.

    2000-01-01

    Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be a perfectly valid operations, but in reality the operations cannot physically be carried out by a human. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications; however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem HFFMs must be integrated with automated assembly planning to allow engineers to verify that assembly operations are possible and to see ways to make the designs even better. Factories will very likely put humans and robots together in cooperative environments to meet the demands for customized products, for purposes including robotic and automated assembly. For robots to work harmoniously within an integrated environment with humans the robots must have cooperative operational skills. For example, in a human only environment, humans may tolerate collisions with one another if they did not cause much pain. This level of tolerance may or may not apply to robot-human environments. Humans expect that robots will be able to operate and navigate in their environments without collisions or interference. The ability to accomplish this is linked to the sensing capabilities available. Current work in the field of cooperative

  3. Dynamic behaviour of diagnostic assemblies

    International Nuclear Information System (INIS)

    Pecinka, L.

    1980-01-01

    The methodology is shown of calculating the frequency spectrum of a diagnostic assembly. The oscillations of the assembly as a whole, of a fuel rod bundle, the assembly jacket and of the individual rods in the bundle were considered. The manufacture is suggested of a model assembly which would be used for testing forced vibrations using an experimental water loop. (M.S.)

  4. Fuel assembly inspection device

    International Nuclear Information System (INIS)

    Yaginuma, Yoshitaka

    1998-01-01

    The present invention provides a device suitable to inspect appearance of fuel assemblies by photographing the appearance of fuel assemblies. Namely, the inspection device of the present invention measures bowing of fuel assembly or each of fuel rods or both of them based on the partially photographed images of fuel assembly. In this case, there is disposed a means which flashily projects images in the form of horizontal line from a direction intersecting obliquely relative to a horizontal cross section of the fuel assembly. A first image processing means separates the projected image pictures including projected images and calculates bowing. A second image processing means replaces the projected image pictures of the projected images based on projected images just before and after the photographing. Then, images for the measurement of bowing and images for inspection can be obtained simultaneously. As a result, the time required for the photographing can be shortened, the time for inspection can be shortened and an effect of preventing deterioration of photographing means by radiation rays can be provided. (I.S.)

  5. The design of reconfigurable assembly stations for high variety and mass customisation manufacturing

    Directory of Open Access Journals (Sweden)

    Padayachee, Jared

    2013-11-01

    Full Text Available The economical production of mass customised and high variety goods is a challenge facing modern manufacturers. This challenge is being addressed, in part, by the on-going development of technologies that facilitate the manufacturing of these goods. Existing technologies require either excessive inbuilt flexibility or frequent changes to the machine set up to provide the manufacturing functions required for the customisation process. This paper presents design principles for automated assembly stations within the scope of mass customisation. Design principles are presented that minimise the hardware and operating complexities of assembly stations, allowing stations to be easily automated for concurrent mixed model assembly with a First In First Out (FIFO scheduling policy. A reconfigurable assembly station is developed to demonstrate how the proposed design methods simplify the creation and operation of an assembly station for a product family of flashlights.

  6. Blade attachment assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  7. Reactor and fuel assembly

    International Nuclear Information System (INIS)

    Ishii, Yoshihiko; Bessho, Yasunori; Sano, Hiroki; Yokomizo, Osamu; Yamashita, Jun-ichi.

    1990-01-01

    The present invention realizes an effective spectral operation by applying an optimum pressure loss coefficient while taking the characteristics of a lower tie plate into consideration. That is, the pressure loss coefficient of the lower tie plate is optimized by varying the cross sectional area of a fuel assembly flow channel in the lower tie plate or varying the surface roughness of a coolant flow channel in the lower tie plate. Since there is a pressure loss coefficient to optimize the moderator density over a flow rate change region, the effect of spectral shift rods can be improved by setting the optimum pressure loss coefficient of the lower tie plate. According to the present invention, existent fuel assemblies can easily be changed successively to fuel assemblies having spectral shift rods of a great spectral shift effect by using existent reactor facilities as they are. (I.S.)

  8. Power module assembly

    Science.gov (United States)

    Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

    2011-11-15

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  9. Magnetic nanoparticle assemblies

    CERN Document Server

    Trohidou, Kalliopi N

    2014-01-01

    Magnetic nanoparticles with diameters in the range of a few nanometers are today at the cutting edge of modern technology and innovation because of their use in numerous applications ranging from engineering to biomedicine. A great deal of scientific interest has been focused on the functionalization of magnetic nanoparticle assemblies. The understanding of interparticle interactions is necessary to clarify the physics of these assemblies and their use in the development of high-performance magnetic materials. This book reviews prominent research studies on the static and dynamic magnetic properties of nanoparticle assemblies, gathering together experimental and computational techniques in an effort to reveal their optimized magnetic properties for biomedical use and as ultra-high magnetic recording media.

  10. Reactor fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1980-01-01

    A nuclear reactor fuel assembly having a lower end fitting and actuating means interacting therewith for holding the assembly down on the core support stand against the upward flow of coolant. Locking means for interacting with projections on the support stand are carried by the lower end fitting and are actuated by the movement of an actuating rod operated from above the top of the assembly. In one embodiment of the invention the downward movement of the actuating rod forces a latched spring to move outward into locking engagement with a shoulder on the support stand projections. In another embodiment, the actuating rod is rotated to effect the locking between the end fitting and the projection. (author)

  11. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Hayashi, Hiroshi; Watari, Yoshio; Hizahara, Hiroshi; Masuoka, Ryuzo.

    1970-01-01

    When exchanging nuclear fuel assemblies during the operation of a nuclear reactor, melting of fuel bodies, and severence of tubular claddings is halted at the time of insertion by furnishing a neutron absorbing material such as B 10 , Cd, Gd or the like at the forward end of the fuel assembly to thereby lower the power peak at the forward ends of the fuel elements to within tolerable levels and thus prevent both fuel liquification and excessive expansion. The neutron absorbing material may be attached in the form of a plate to the fuel assembly forward tie plate, or may be inserted as a pellet into the front end of the tubular cladding. (Owens, K.J.)

  12. Liaison based assembly design

    Energy Technology Data Exchange (ETDEWEB)

    Ames, A.; Kholwadwala, D.; Wilson, R.H.

    1996-12-01

    Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

  13. Integrated magnetic transformer assembly

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to an integrated magnetics transformer assembly comprising a first magnetically permeable core forming a first substantially closed magnetic flux path and a second magnetically permeable core forming a second substantially closed magnetic flux path. A first input...... inductor winding is wound around a first predetermined segment of the first magnetically permeable core and a second input inductor winding is wound around a first predetermined segment of the second magnetically permeable core. The integrated magnetics transformer assembly further comprises a first output......-winding of the first output inductor winding and the first half-winding of the second output inductor winding are configured to produce aligned, i.e. in the same direction, magnetic fluxes through the first substantially closed magnetic flux path. The integrated magnetics transformer assembly is well- suited for use...

  14. Accomplishments in Field Period Assembly for NCSX. This is how we did it

    International Nuclear Information System (INIS)

    Viola, Michael; Edwards, J.; Brown, T.; Dudek, L.; Ellis, R.; Heitzenroeder, P.; Strykowsky, R.; Cole, Michael

    2009-01-01

    The National Compact Stellarator Experiment (NCSX) was a collaborative effort between ORNL and PPPL. PPPL provided the assembly techniques with guidance from ORNL to meet design criteria. The individual vacuum vessel segments, modular coils, trim coils, and toroidal field coils components were delivered to the Field Period Assembly (FPA) crew who then would complete the component assemblies and then assemble the final three field period assemblies, each consisting of two sets of three modular coils assembled over a 120o vacuum vessel segment with the trim coils and toroidal field coils providing the outer layer. The requirements for positioning the modular coils were found to be most demanding. The assembly tolerances required for accurate positioning of the field coil windings in order to generate sufficiently accurate magnetic fields strained state of the art techniques in metrology and alignment and required constant monitoring of assembly steps with laser trackers, measurement arms, and photogrammetry. The FPA activities were being performed concurrently while engineering challenges were being resolved. For example, it was determined that high friction electrically isolated shims were needed between the modular coil interface joints and low distortion welding was required in the nose region of those joints. This took months of analysis and development yet the assembly was not significantly impacted because other assembly tasks could be performed in parallel with ongoing assembly tasks as well as tasks such as advance tooling setup preparation for the eventual welding tasks. The crew technicians developed unique, accurate time saving techniques and tooling which provided significant cost and schedule savings. Project management displayed extraordinary foresight and every opportunity to gain advanced knowledge and develop techniques was taken advantage of. Despite many risk concerns, the cost and schedule performance index was maintained nearly 1.0 during the

  15. Transfer of fuel assemblies

    International Nuclear Information System (INIS)

    Vuckovich, M.; Burkett, J. P.; Sallustio, J.

    1984-01-01

    Fuel assemblies of a nuclear reactor are transferred during fueling or refueling or the like by a crane. The work-engaging fixture of the crane picks up an assembly, removes it from this slot, transfers it to the deposit site and deposits it in its slot at the deposit site. The control for the crane includes a strain gauge connected to the crane line which raises and lowers the load. The strain gauge senses the load on the crane. The signal from the strain gauge is compared with setpoints; a high-level setpoint, a low-level setpoint and a slack-line setpoint. If the strain gauge signal exceeds the high-level setpoint, the line drive is disabled. This event may occur during raising of a fuel assembly which encounters resistance. The high-level setpoint may be overridden under proper precautions. The line drive is also disabled if the strain gauge signal is less than the low-level setpoint. This event occurs when a fuel assembly being deposited contacts the bottom of its slot or an obstruction in, or at the entry to the slot. To preclude lateral movement and possible damage to a fuel assembly suspended from the crane line, the traverse drive of the crane is disabled once the strain-gauge exceets the lov-level setpoint. The traverse drive can only be enabled after the strain-gauge signal is less than the slack-line set-point. This occurs when the lines has been set in slack-line setting. When the line is tensioned after slack-li ne setting, the traverse drive remains enabled only if the line has been disconnected from the fuel assembly

  16. Heterogeneous MEMS device assembly and integration

    Science.gov (United States)

    Topart, Patrice; Picard, Francis; Ilias, Samir; Alain, Christine; Chevalier, Claude; Fisette, Bruno; Paultre, Jacques E.; Généreux, Francis; Legros, Mathieu; Lepage, Jean-François; Laverdière, Christian; Ngo Phong, Linh; Caron, Jean-Sol; Desroches, Yan

    2014-03-01

    In recent years, smart phone applications have both raised the pressure for cost and time to market reduction, and the need for high performance MEMS devices. This trend has led the MEMS community to develop multi-die packaging of different functionalities or multi-technology (i.e. wafer) approaches to fabricate and assemble devices respectively. This paper reports on the fabrication, assembly and packaging at INO of various MEMS devices using heterogeneous assembly at chip and package-level. First, the performance of a giant (e.g. about 3 mm in diameter), electrostatically actuated beam steering mirror is presented. It can be rotated about two perpendicular axes to steer an optical beam within an angular cone of up to 60° in vector scan mode with an angular resolution of 1 mrad and a response time of 300 ms. To achieve such angular performance relative to mirror size, the microassembly was performed from sub-components fabricated from 4 different wafers. To combine infrared detection with inertial sensing, an electroplated proof mass was flip-chipped onto a 256×1 pixel uncooled bolometric FPA and released using laser ablation. In addition to the microassembly technology, performance results of packaged devices are presented. Finally, to simulate a 3072×3 pixel uncooled detector for cloud and fire imaging in mid and long-wave IR, the staggered assembly of six 512×3 pixel FPAs with a less than 50 micron pixel co-registration is reported.

  17. Neutron detector assembly

    International Nuclear Information System (INIS)

    Hanai, Koi; Shirayama, Shinpei.

    1978-01-01

    Purpose: To prevent gamma-ray from leaking externally passing through the inside of a neutron detector assembly. Constitution: In a neutron detector assembly having a protection pipe formed with an enlarged diameter portion which serves also as a spacer, partition plates with predetermined width are disposed at the upper and the lower portions in this expanded portion. A lot of metal particles are filled into spaces formed by the partition plates. In such a structure, the metal particles well-absorb the gamma-rays from above and convert them into heat to provide shielding for the gamma-rays. (Horiuchi, T.)

  18. Assembling RNA Nanoparticles.

    Science.gov (United States)

    Xiao, Shou-Jun

    2017-01-01

    RNA nanoparticles are designed and self-assembled according to noncanonical interactions of naturally conserved RNA motifs and/or canonical Watson-Crick base-pairing interactions, which have potential applications in gene therapy and nanomedicine. These artificially engineered nanoparticles are mainly synthesized from in vitro transcribed RNAs, purified by denaturing and native polyacrylamide gel electrophoresis (PAGE), and characterized with native PAGE, AFM, and TEM technologies. The protocols of in vitro transcription, denaturing and native PAGE, and RNA nanoparticle self-assembly are described in detail.

  19. Assembling an aesthetic.

    Science.gov (United States)

    Candela, Emily

    2012-12-01

    Recent research informing and related to the study of three-dimensional scientific models is assembled here in a way that explores an aesthetic, specifically, of touch. I concentrate on the materiality of models, drawing on insights from the history and philosophy of science, design and metaphysics. This article chronicles the ways in which touch, or material interactions, operate in the world of 3D models, and its role in what models mean and do. I end with a call for greater attention to scientific process, described as assembly of and within science, which is revealed by this focus on touch. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    1975-01-01

    The nuclear fuel assembly described includes a cluster of fuel elements supported at a distance from each other so that their axes are parallel in order to establish secondary channels between them reserved for the coolant. Several ducts for an auxiliary cooling fluid are arranged in the cluster. The wall of each duct is pierced with coolant ejection holes which are placed circumferentially to a pre-determined pattern established according to the position of the duct in the cluster and by the axial distance of the ejection hole along the duct. This assembly is intended for reactors cooled by light or heavy water [fr

  1. Introducing the Canadian Thoracic Society Framework for Guideline Dissemination and Implementation, with Concurrent Evaluation

    Directory of Open Access Journals (Sweden)

    Samir Gupta

    2013-01-01

    Full Text Available The Canadian Thoracic Society (CTS is leveraging its strengths in guideline production to enable respiratory guideline implementation in Canada. The authors describe the new CTS Framework for Guideline Dissemination and Implementation, with Concurrent Evaluation, which has three spheres of action: guideline production, implementation infrastructure and knowledge translation (KT methodological support. The Canadian Institutes of Health Research ‘Knowledge-to-Action’ process was adopted as the model of choice for conceptualizing KT interventions. Within the framework, new evidence for formatting guideline recommendations to enhance the intrinsic implementability of future guidelines were applied. Clinical assemblies will consider implementability early in the guideline production cycle when selecting clinical questions, and new practice guidelines will include a section dedicated to KT. The framework describes the development of a web-based repository and communication forum to inventory existing KT resources and to facilitate collaboration and communication among implementation stakeholders through an online discussion board. A national forum for presentation and peer-review of proposed KT projects is described. The framework outlines expert methodological support for KT planning, development and evaluation including a practical guide for implementers and a novel ‘Clinical Assembly – KT Action Team’, and in-kind logistical support and assistance in securing peer-reviewed funding.

  2. High resolution tomographic instrument development

    International Nuclear Information System (INIS)

    1992-01-01

    Our recent work has concentrated on the development of high-resolution PET instrumentation reflecting in part the growing importance of PET in nuclear medicine imaging. We have developed a number of positron imaging instruments and have the distinction that every instrument has been placed in operation and has had an extensive history of application for basic research and clinical study. The present program is a logical continuation of these earlier successes. PCR-I, a single ring positron tomograph was the first demonstration of analog coding using BGO. It employed 4 mm detectors and is currently being used for a wide range of biological studies. These are of immense importance in guiding the direction for future instruments. In particular, PCR-II, a volume sensitive positron tomograph with 3 mm spatial resolution has benefited greatly from the studies using PCR-I. PCR-II is currently in the final stages of assembly and testing and will shortly be placed in operation for imaging phantoms, animals and ultimately humans. Perhaps the most important finding resulting from our previous study is that resolution and sensitivity must be carefully balanced to achieve a practical high resolution system. PCR-II has been designed to have the detection characteristics required to achieve 3 mm resolution in human brain under practical imaging situations. The development of algorithms by the group headed by Dr. Chesler is based on a long history of prior study including his joint work with Drs. Pelc and Reiderer and Stearns. This body of expertise will be applied to the processing of data from PCR-II when it becomes operational

  3. High resolution tomographic instrument development

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    Our recent work has concentrated on the development of high-resolution PET instrumentation reflecting in part the growing importance of PET in nuclear medicine imaging. We have developed a number of positron imaging instruments and have the distinction that every instrument has been placed in operation and has had an extensive history of application for basic research and clinical study. The present program is a logical continuation of these earlier successes. PCR-I, a single ring positron tomograph was the first demonstration of analog coding using BGO. It employed 4 mm detectors and is currently being used for a wide range of biological studies. These are of immense importance in guiding the direction for future instruments. In particular, PCR-II, a volume sensitive positron tomograph with 3 mm spatial resolution has benefited greatly from the studies using PCR-I. PCR-II is currently in the final stages of assembly and testing and will shortly be placed in operation for imaging phantoms, animals and ultimately humans. Perhaps the most important finding resulting from our previous study is that resolution and sensitivity must be carefully balanced to achieve a practical high resolution system. PCR-II has been designed to have the detection characteristics required to achieve 3 mm resolution in human brain under practical imaging situations. The development of algorithms by the group headed by Dr. Chesler is based on a long history of prior study including his joint work with Drs. Pelc and Reiderer and Stearns. This body of expertise will be applied to the processing of data from PCR-II when it becomes operational.

  4. High resolution tomographic instrument development

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Our recent work has concentrated on the development of high-resolution PET instrumentation reflecting in part the growing importance of PET in nuclear medicine imaging. We have developed a number of positron imaging instruments and have the distinction that every instrument has been placed in operation and has had an extensive history of application for basic research and clinical study. The present program is a logical continuation of these earlier successes. PCR-I, a single ring positron tomograph was the first demonstration of analog coding using BGO. It employed 4 mm detectors and is currently being used for a wide range of biological studies. These are of immense importance in guiding the direction for future instruments. In particular, PCR-II, a volume sensitive positron tomograph with 3 mm spatial resolution has benefited greatly from the studies using PCR-I. PCR-II is currently in the final stages of assembly and testing and will shortly be placed in operation for imaging phantoms, animals and ultimately humans. Perhaps the most important finding resulting from our previous study is that resolution and sensitivity must be carefully balanced to achieve a practical high resolution system. PCR-II has been designed to have the detection characteristics required to achieve 3 mm resolution in human brain under practical imaging situations. The development of algorithms by the group headed by Dr. Chesler is based on a long history of prior study including his joint work with Drs. Pelc and Reiderer and Stearns. This body of expertise will be applied to the processing of data from PCR-II when it becomes operational.

  5. Fire resistant PV shingle assembly

    Science.gov (United States)

    Lenox, Carl J.

    2012-10-02

    A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

  6. Test of GERDA Phase II detector assembly

    Energy Technology Data Exchange (ETDEWEB)

    Bode, Tobias; Gusev, Konstantin [Technische Universitaet Muenchen (Germany); Schwingenheuer, Bernhard; Wagner, Victoria [Max-Planck Institut fuer Kernphysik, Heidelberg (Germany); Collaboration: GERDA-Collaboration

    2014-07-01

    The GERDA experiment searches for the lepton number violating neutrinoless double beta decay (0νββ) of {sup 76}Ge. The experiment uses HPGe detectors enriched in {sup 76}Ge as source and detection material. In GERDA Phase I five BEGe detectors were operated successfully. These detectors are distinguished for improved energy resolution and enhanced pulse shape discrimination (PSD) against background events. In Phase II additional 25 BEGe detectors will be installed. New electronics and radio-pure low-mass holders were specially designed for Phase II. Prior to the installation in GERDA all BEGe detectors are tested in their final assembly in the LNGS underground laboratory. This talk presents the mechanics and performance of the GERDA Phase II detector assembly.

  7. Software design for the Tritium System Test Assembly

    International Nuclear Information System (INIS)

    Claborn, G.W.; Heaphy, R.T.; Lewis, P.S.; Mann, L.W.; Nielson, C.W.

    1983-01-01

    The control system for the Tritium Systems Test Assembly (TSTA) must execute complicated algorithms for the control of several sophisticated subsystems. It must implement this control with requirements for easy modifiability, for high availability, and provide stringent protection for personnel and the environment. Software techniques used to deal with these requirements are described, including modularization based on the structure of the physical systems, a two-level hierarchy of concurrency, a dynamically modifiable man-machine interface, and a specification and documentation language based on a computerized form of structured flowcharts

  8. Software design for the Tritium Systems Test Assembly

    International Nuclear Information System (INIS)

    Claborn, G.W.; Keaphy, R.T.

    1983-01-01

    The control system for the Tritium Systems Test Assembly (TSTA) must execute complicated algorithms for the control of several sophisticated subsystems. It must implement this control with requirements for easy modifiability, for high availability, and provide stringent protection for personnel and the environment. Software techniques used to deal with these requirements are described, including modularization based on the structure of the physical systems, a two-level hierarchy of concurrency, a dynamically modifiable manmachine interface, and a specification and documentation language based on a computerized form of structured flowcharts

  9. Concurrent sexual partners-A predictor of Chlamydia

    DEFF Research Database (Denmark)

    Jørgensen, Marianne Johansson; Olesen, Frede; Maindal, Helle Terkildsen

    2013-01-01

    , but the significance of this compared with other well-known predictors has only been briefly described. Aim: The aim is to examine if concurrent partners isan independent predictor for C. trachomatis infection in young Danes aged 15-29 years. Methods: Detailed sexual behavior data were collected via a web......:These preliminary results suggest that concurrent sexual partners is an important predictor for C.trachomatis infections among young Danes aged 15-29. A more concise conclusion will be presented at the Ph.D day......Background:Chlamydia trachomatis is the most common sexually transmitted bacterial infection among young Danes and the spread is highly dependent on the population’s sexual behavior. Previous studies have found concurrent partnerships to be a possible predictor for C. trachomatis...

  10. Mathematical techniques for analyzing concurrent and probabilistic systems

    CERN Document Server

    Rutten, J J M M; Panangaden, Prakash; Panangaden, Prakash; Breugel, Franck van

    2004-01-01

    The book consists of two sets of lecture notes devoted to slightly different methods of analysis of concurrent and probabilistic computational systems. The first set of lectures develops a calculus of streams (a generalization of the set of natural numbers) based on the coinduction principle coming from the theory of coalgebras. It is now well understood that the interplay between algebra (for describing structure) and coalgebra (for describing dynamics) is crucial for understanding concurrent systems. There is a striking analogy between streams and formula calculus reminiscent to those appearing in quantum calculus. These lecture notes will appeal to anyone working in concurrency theory but also to algebraists and logicians. The other set of lecture notes focuses on methods for automatically verifying probabilistic systems using techniques of model checking. The unique aspect of these lectures is the coverage of both theory and practice. The authors have been responsible for one of the most successful experi...

  11. How Formal Dynamic Verification Tools Facilitate Novel Concurrency Visualizations

    Science.gov (United States)

    Aananthakrishnan, Sriram; Delisi, Michael; Vakkalanka, Sarvani; Vo, Anh; Gopalakrishnan, Ganesh; Kirby, Robert M.; Thakur, Rajeev

    With the exploding scale of concurrency, presenting valuable pieces of information collected by formal verification tools intuitively and graphically can greatly enhance concurrent system debugging. Traditional MPI program debuggers present trace views of MPI program executions. Such views are redundant, often containing equivalent traces that permute independent MPI calls. In our ISP formal dynamic verifier for MPI programs, we present a collection of alternate views made possible by the use of formal dynamic verification. Some of ISP’s views help pinpoint errors, some facilitate discerning errors by eliminating redundancy, while others help understand the program better by displaying concurrent even orderings that must be respected by all MPI implementations, in the form of completes-before graphs. In this paper, we describe ISP’s graphical user interface (GUI) capabilities in all these areas which are currently supported by a portable Java based GUI, a Microsoft Visual Studio GUI, and an Eclipse based GUI whose development is in progress.

  12. Contemporary considerations in concurrent endoscopic sinus surgery and rhinoplasty.

    Science.gov (United States)

    Steele, Toby O; Gill, Amarbir; Tollefson, Travis T

    2018-06-11

    Characterize indications, perioperative considerations, clinical outcomes and complications for concurrent endoscopic sinus surgery (ESS) and rhinoplasty. Chronic rhinosinusitis and septal deviation with or without inferior turbinate hypertrophy independently impair patient-reported quality of life. Guidelines implore surgeons to include endoscopy to accurately evaluate patient symptoms. Complication rates parallel those of either surgery (ESS and rhinoplasty) alone and are not increased when performed concurrently. Operative time is generally longer for joint surgeries. Patient satisfaction rates are high. Concurrent functional and/or cosmetic rhinoplasty and ESS is a safe endeavor to perform in a single operative setting and most outcomes data suggest excellent patient outcomes. Additional studies that include patient-reported outcome measures are needed.

  13. Engineering Bereitschaft as an enabler for Concurrent Engineering

    DEFF Research Database (Denmark)

    Christiansen, Kåre; Vesterager, Johan

    1999-01-01

    Industrial companies observe a general trend towards more customised products and shorter product life cycles. Furthermore, the market demands shorter lead-time and high-quality products at a competitive price. Concurrent Engineering address these challenges. Product modelling is a key aspect...... of the Concurrent Engineering literature. One problem with the product modelling literature is that it tends to assume that product development is revolutionary. Very often product development is evolutionary and it means that product modelling should have a major emphasis on reuse. In this paper it is suggested...... that industrial companies should develop an engineering development Bereitschaft (preparatory engineering knowledge) as an approach to Concurrent Engineering and product modelling. To develop such an engineering development Bereitschaft, a company must develop company generic product models.This paper...

  14. How Do Developers Use APIs? A Case Study in Concurrency

    DEFF Research Database (Denmark)

    Blom, Stefan; Kiniry, Joseph; Huisman, Marieke

    2013-01-01

    and functionalities of the Java concurrency library java. util. concurrent. It discusses the Histogram tool that we developed for this purpose, i.e., to efficiently analyse a large collection of bytecode classes. The Histogram tool is used on a representative benchmark set, the Qualitas Corpus. The paper discusses...... the results of the analysis of this benchmark set in detail. This covers both an analysis of the important classes and methods used by the current releases of the benchmark collection, as well as an analysis of the time it took for the Java concurrency library to start being used in released software....... of static analysis and verification tools this information is highly important, because it indicates where and how to put the most efficient effort in annotating APIs, to make them usable for the static analysis and verification tools. This paper presents an analysis of the usage of the routines...

  15. Turbomachine blade assembly

    Science.gov (United States)

    Garcia Crespo, Andres Jose

    2016-11-01

    Embodiments of the present disclosure include a system comprising a turbomachine blade assembly having a blade portion, a shank portion, and a mounting portion, wherein the blade portion, the shank portion, and the mounting portion comprise a first plurality of plies extending from a tip of the airfoil to a base of the dovetail.

  16. Fuel sub-assembly

    International Nuclear Information System (INIS)

    Jolly, R.

    1982-01-01

    A fuel sub-assembly for a liquid metal cooled nuclear reactor is described in which the bundle of fuel pins are braced apart by a series of spaced grids. The grids at the lower end are capable of yielding, thus allowing pins swollen by irradiation to be withdrawn with a reduced risk of damage. (U.K.)

  17. Nanoparticle assemblies and superstructures

    National Research Council Canada - National Science Library

    Kotov, Nicholas A

    2006-01-01

    ... building blocks of larger and more complex systems. Therefore, the present challenge of nanoscale science is to shift from making certain building blocks to organizing them in one-, two-, and three-dimensional structures. Such assemblies and superstructures are the next logical step in the development of nanoscience and nanotechnology. In this re...

  18. Spool assembly support analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the pump pit spool assemblies. Hand calculations were used for the analysis. UBC, AISC, and load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  19. Nanotechnology: A molecular assembler

    Science.gov (United States)

    Kelly, T. Ross; Snapper, Marc L.

    2017-09-01

    The idea of nanometre-scale machines that can assemble molecules has long been thought of as the stuff of science fiction. Such a machine has now been built -- and might herald a new model for organic synthesis. See Letter p.374

  20. Macroscopic magnetic Self assembly

    NARCIS (Netherlands)

    Löthman, Per Arvid

    2018-01-01

    Exploring the macroscopic scale's similarities to the microscale is part and parcel of this thesis as reflected in the research question: what can we learn about the microscopic scale by studying the macroscale? Investigations of the environment in which the self-assembly takes place, and the

  1. Assembling Sustainable Territories

    DEFF Research Database (Denmark)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    that territorialisation is accomplished not just through (re)defining bounded space, but more broadly through the assembling of four elements: space, subjects, objects, and expertise. Four case studies of sustainability certification in seafood are analyzed to show that ‘green gabbing’ is not necessarily the central...

  2. Assembling sustainable territories

    NARCIS (Netherlands)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    The authors show how certification assembles ‘sustainable’ territories through a complex layering of regulatory authority in which both government and nongovernment entities claim rule-making authority, sometimes working together, sometimes in parallel, sometimes competitively. It is argued that

  3. Turneri preemia 2015: Assemble

    Index Scriptorium Estoniae

    2015-01-01

    Turneri 2015. aasta preemia pälvis radikaalne noorte arhitektide kollektiiv Assemble. Rühmitus on 18-liikmeline ja baseerub Ida-Londonis ning selle tegevust võib üldistatult nimetada hüljatud ruumide taaselustamiseks kogukondlike aktsioonide kaudu

  4. Industrial Assembly Cases

    DEFF Research Database (Denmark)

    Ellekilde, Lars-Peter; Buch, Jacob Pørksen; Iversen, Thorbjørn Mosekjær

    This technical report presents 13 different industrial assembly tasks, which are composed of 70 different operations. The report is written to provide an overview and do as such not contain product specific information such as object weights, dimensions etc. The operations are classified into a set...

  5. Biosynthesis: Reprogramming assembly lines

    Science.gov (United States)

    Menon, Binuraj R. K.; Jenner, Matthew

    2018-03-01

    Rational engineering of biosynthetic assembly lines for production of new compounds is an attractive prospect, yet it presents many challenges. Learning from biology, some of the rules for expanding the chemical diversity of non-ribosomal peptides have been uncovered in two recent studies.

  6. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2011-01-01

    Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation et and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly ma...

  7. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2011-01-01

    Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may r...

  8. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may require t...

  9. Lageos assembly operation plan

    Science.gov (United States)

    Brueger, J.

    1975-01-01

    Guidelines and constraints procedures for LAGEOS assembly, operation, and design performance are given. Special attention was given to thermal, optical, and dynamic analysis and testing. The operation procedures illustrate the interrelation and sequence of tasks in a flow diagram. The diagram also includes quality assurance functions for verification of operation tasks.

  10. Assembly of primary cilia

    DEFF Research Database (Denmark)

    Pedersen, Lotte B; Veland, Iben R; Schrøder, Jacob M

    2008-01-01

    knowledge about IFT is based on studies performed in Chlamydomonas and Caenorhabditis elegans. Therefore, our review of the IFT literature includes studies performed in these two model organisms. The role of several non-IFT proteins (e.g., centrosomal proteins) in the ciliary assembly process is also...... discussed. Developmental Dynamics, 2008. (c) 2008 Wiley-Liss, Inc....

  11. Concurrent negotiation and coordination for grid resource coallocation.

    Science.gov (United States)

    Sim, Kwang Mong; Shi, Benyun

    2010-06-01

    Bolstering resource coallocation is essential for realizing the Grid vision, because computationally intensive applications often require multiple computing resources from different administrative domains. Given that resource providers and consumers may have different requirements, successfully obtaining commitments through concurrent negotiations with multiple resource providers to simultaneously access several resources is a very challenging task for consumers. The impetus of this paper is that it is one of the earliest works that consider a concurrent negotiation mechanism for Grid resource coallocation. The concurrent negotiation mechanism is designed for 1) managing (de)commitment of contracts through one-to-many negotiations and 2) coordination of multiple concurrent one-to-many negotiations between a consumer and multiple resource providers. The novel contributions of this paper are devising 1) a utility-oriented coordination (UOC) strategy, 2) three classes of commitment management strategies (CMSs) for concurrent negotiation, and 3) the negotiation protocols of consumers and providers. Implementing these ideas in a testbed, three series of experiments were carried out in a variety of settings to compare the following: 1) the CMSs in this paper with the work of others in a single one-to-many negotiation environment for one resource where decommitment is allowed for both provider and consumer agents; 2) the performance of the three classes of CMSs in different resource market types; and 3) the UOC strategy with the work of others [e.g., the patient coordination strategy (PCS )] for coordinating multiple concurrent negotiations. Empirical results show the following: 1) the UOC strategy achieved higher utility, faster negotiation speed, and higher success rates than PCS for different resource market types; and 2) the CMS in this paper achieved higher final utility than the CMS in other works. Additionally, the properties of the three classes of CMSs in

  12. Oligopolistic concurrence and investment: application to electricity markets

    International Nuclear Information System (INIS)

    Meunier, G.

    2008-12-01

    This research aims at analysing investment strategies of firms which are in an oligopolistic situation. After a brief description of the physical characteristics of an electric system, the author describes the reforms and defines the problematic of an investment in electricity production within markets in imperfect concurrence. In a first part, the author analyses the heterogeneity (either exogenous or endogenous) and technology choices of oligopolistic firms. In case of an exogenous heterogeneity, he studies the impact of the number of firms on investment decisions. In the second part, the author examines the regulations introduced in industries in imperfect concurrence: electricity production by a public firm and interaction between emission allowance market and investment

  13. Separative power of an optimised concurrent gas centrifuge

    Energy Technology Data Exchange (ETDEWEB)

    Bogovalov, Sergey; Boman, Vladimir [National Research Nuclear University (MEPHI), Moscow (Russian Federation)

    2016-06-15

    The problem of separation of isotopes in a concurrent gas centrifuge is solved analytically for an arbitrary binary mixture of isotopes. The separative power of the optimised concurrent gas centrifuges for the uranium isotopes equals to δU = 12.7 (V/700 m/s)2(300 K/T)(L/1 m) kg·SWU/yr, where L and V are the length and linear velocity of the rotor of the gas centrifuge and T is the temperature. This equation agrees well with the empirically determined separative power of optimised counter-current gas centrifuges.

  14. Concurrent engineering and product models in seafood companies

    DEFF Research Database (Denmark)

    Jonsdottir, Stella; Vesterager, Johan; Børresen, Torger

    1998-01-01

    Concurrent Engineering (CE) can provide an improved approach to product development for extending the lines of seafood products. Information technology (IT) support tools based on product models can provide an integrated and simultaneous approach for specifying new recipes. The seafood industry can...... benefit from the CE approach which can support product developers to provide concurrent specifications for raw materials, ingredients, packaging, and production methods. The approach involves the use of product models from which line extensions are more easily generated than by use of customary stepwise...

  15. Adaptive resolution simulation of salt solutions

    International Nuclear Information System (INIS)

    Bevc, Staš; Praprotnik, Matej; Junghans, Christoph; Kremer, Kurt

    2013-01-01

    We present an adaptive resolution simulation of aqueous salt (NaCl) solutions at ambient conditions using the adaptive resolution scheme. Our multiscale approach concurrently couples the atomistic and coarse-grained models of the aqueous NaCl, where water molecules and ions change their resolution while moving from one resolution domain to the other. We employ standard extended simple point charge (SPC/E) and simple point charge (SPC) water models in combination with AMBER and GROMOS force fields for ion interactions in the atomistic domain. Electrostatics in our model are described by the generalized reaction field method. The effective interactions for water–water and water–ion interactions in the coarse-grained model are derived using structure-based coarse-graining approach while the Coulomb interactions between ions are appropriately screened. To ensure an even distribution of water molecules and ions across the simulation box we employ thermodynamic forces. We demonstrate that the equilibrium structural, e.g. radial distribution functions and density distributions of all the species, and dynamical properties are correctly reproduced by our adaptive resolution method. Our multiscale approach, which is general and can be used for any classical non-polarizable force-field and/or types of ions, will significantly speed up biomolecular simulation involving aqueous salt. (paper)

  16. Concurrent multiscale modeling of microstructural effects on localization behavior in finite deformation solid mechanics

    Science.gov (United States)

    Alleman, Coleman N.; Foulk, James W.; Mota, Alejandro; Lim, Hojun; Littlewood, David J.

    2018-02-01

    The heterogeneity in mechanical fields introduced by microstructure plays a critical role in the localization of deformation. To resolve this incipient stage of failure, it is therefore necessary to incorporate microstructure with sufficient resolution. On the other hand, computational limitations make it infeasible to represent the microstructure in the entire domain at the component scale. In this study, the authors demonstrate the use of concurrent multiscale modeling to incorporate explicit, finely resolved microstructure in a critical region while resolving the smoother mechanical fields outside this region with a coarser discretization to limit computational cost. The microstructural physics is modeled with a high-fidelity model that incorporates anisotropic crystal elasticity and rate-dependent crystal plasticity to simulate the behavior of a stainless steel alloy. The component-scale material behavior is treated with a lower fidelity model incorporating isotropic linear elasticity and rate-independent J2 plasticity. The microstructural and component scale subdomains are modeled concurrently, with coupling via the Schwarz alternating method, which solves boundary-value problems in each subdomain separately and transfers solution information between subdomains via Dirichlet boundary conditions. In this study, the framework is applied to model incipient localization in tensile specimens during necking.

  17. School Assemblies: The Lost Art.

    Science.gov (United States)

    Beach, Daniel R.

    1979-01-01

    Guidelines and suggestions are offered for successful school assemblies. The school assembly should be a positive event; an occasion for developing unity, group loyalty, and desirable audience habits. (Author/MLF)

  18. Assembling large, complex environmental metagenomes

    Energy Technology Data Exchange (ETDEWEB)

    Howe, A. C. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Jansson, J. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Earth Sciences Division; Malfatti, S. A. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tringe, S. G. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tiedje, J. M. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Brown, C. T. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Computer Science and Engineering

    2012-12-28

    The large volumes of sequencing data required to sample complex environments deeply pose new challenges to sequence analysis approaches. De novo metagenomic assembly effectively reduces the total amount of data to be analyzed but requires significant computational resources. We apply two pre-assembly filtering approaches, digital normalization and partitioning, to make large metagenome assemblies more computationaly tractable. Using a human gut mock community dataset, we demonstrate that these methods result in assemblies nearly identical to assemblies from unprocessed data. We then assemble two large soil metagenomes from matched Iowa corn and native prairie soils. The predicted functional content and phylogenetic origin of the assembled contigs indicate significant taxonomic differences despite similar function. The assembly strategies presented are generic and can be extended to any metagenome; full source code is freely available under a BSD license.

  19. X-Ray Assembler Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — Federal regulations require that an assembler who installs one or more certified components of a diagnostic x-ray system submit a report of assembly. This database...

  20. Welding facilities for NPP assembling

    International Nuclear Information System (INIS)

    Rojtenberg, S.S.

    1987-01-01

    Recommendations concerning the choice of equipment for welding in pre-assembling work shops, in the enlarging assembling shops and at the assembling site, are given. Advanced production automatic welders and semiautomatic machines, applied during the NPP equipment assembling as well as automatic machines specially produced for welding the main reactor components and pipelines are described. Automatic and semiautomatic machine and manual welding post supply sources are considered

  1. Reflector-moderated critical assemblies

    International Nuclear Information System (INIS)

    Paxton, H.C.; Jarvis, G.A.; Byers, C.C.

    1975-07-01

    Experiments with reflector-moderated critical assemblies were part of the Rover Program at the Los Alamos Scientific Laboratory (LASL). These assemblies were characterized by thick D 2 O or beryllium reflectors surrounding large cavities that contained highly enriched uranium at low average densities. Because interest in this type of system has been revived by LASL Plasma Cavity Assembly studies, more detailed descriptions of the early assemblies than had been available in the unclassified literature are provided. (U.S.)

  2. The Concurrent Development of Spelling Skills in Two Languages

    Science.gov (United States)

    Joy, Rhonda

    2011-01-01

    The study reported on in this paper investigated the concurrent development of spelling in children learning two languages. The study compared over time and between languages the types of spelling errors made in English as a first language and French as a second. Fortyseven grade one English-speaking children completed an English and French…

  3. The Relational Concurrence of Global Warming and Economic ...

    African Journals Online (AJOL)

    An attempt has been made to examine the concurrent relationship between global warming and economic development focusing on the danger it inheres in developing countries. To achieve this, the paper commenced with the conceptualization of global warming and economic development, the natural and human causes ...

  4. Transactions on Petri Nets and Other Models of Concurrency VI

    DEFF Research Database (Denmark)

    The sixth volume of ToPNoC includes revised versions of selected papers from workshops and tutorials held at the 32nd International Conference on Application and Theory of Petri Nets and Concurrency. It also contains a special section on Networks, Protocols, and Services, as well as a contributed...

  5. A Symbolic Approach to Permission Accounting for Concurrent Reasoning

    NARCIS (Netherlands)

    Huisman, Marieke; Mostowski, Wojciech

    2015-01-01

    Permission accounting is fundamental to modular, thread-local reasoning about concurrent programs. This paper presents a new, symbolic system for permission accounting. In existing systems, permissions are numeric value-based and refer to the current thread only. Our system is based on symbolic

  6. Concurrent Speech Segregation Problems in Hearing Impaired Children

    Directory of Open Access Journals (Sweden)

    Hossein Talebi

    2014-04-01

    Full Text Available Objective: This study was a basic investigation of the ability of concurrent speech segregation in hearing impaired children. Concurrent segregation is one of the fundamental components of auditory scene analysis and plays an important role in speech perception. In the present study, we compared auditory late responses or ALRs between hearing impaired and normal children. Materials & Methods: Auditory late potentials in response to 12 double vowels were recorded in 10 children with moderate to severe sensory neural hearing loss and 10 normal children. Double vowels (pairs of synthetic vowels were presented concurrently and binaurally. Fundamental frequency (F0 of these vowels and the size of the difference in F0 between vowels was 100 Hz and 0.5 semitones respectively. Results: Comparing N1-P2 amplitude showed statistically significant difference in some stimuli between hearing impaired and normal children (P<0.05. This complex indexing the vowel change detection and reflecting central auditory speech representation without active client participation was decreased in hearing impaired children. Conclusion: This study showed problems in concurrent speech segregation in hearing impaired children evidenced by ALRs. This information indicated deficiencies in bottom-up processing of speech characteristics based on F0 and its differences in these children.

  7. Antisocial Behavior and Depressive Symptoms: Longitudinal and Concurrent Relations

    Science.gov (United States)

    Vieno, Alessio; Kiesner, Jeff; Pastore, Massimiliano; Santinello, Massimo

    2008-01-01

    The relations between antisocial behavior and depressive symptoms were examined both longitudinally and concurrently in a sample of Italian early-adolescents. Structural equation modelling was applied to 10-month longitudinal data from a sample of 107 youths (54 girls; mean age at baseline = M = 12.5). Early adolescents completed a questionnaire…

  8. Mechanical verification of concurrency control and recovery protocols

    NARCIS (Netherlands)

    Chkliaev, D.

    2001-01-01

    The thesis concerns the formal specification and mechanized verification of concurrency control and recovery protocols for distributed databases. Such protocols are needed for many modern application such as banking and are often used in safety-critical applications. Therefore it is very important

  9. Bidirectional Interference between Timing and Concurrent Memory Processing in Children

    Science.gov (United States)

    Rattat, Anne-Claire

    2010-01-01

    This study investigated the nature of resources involved in duration processing in 5- and 8-year-olds. The children were asked to reproduce the duration of a visual or auditory stimulus. They performed this task either alone or concurrently with an executive task (Experiment 1) or with a digit or visuospatial memory task (Experiment 2). The…

  10. Partnership duration, concurrency, and HIV in sub-Saharan Africa.

    Science.gov (United States)

    Sawers, Larry; Isaac, Alan

    2017-07-01

    A widely accepted explanation for the exceptionally high HIV prevalence in sub-Saharan Africa is the practice of long-term overlapping heterosexual partnering. This article shows that long-duration concurrent partnering can be protective against HIV transmission rather than promoting it. Monogamous partnering prevents sexual transmission to anyone outside the partnership and, in an initially concordant-seronegative partnership, prevents sexual acquisition of HIV by either partner. Those protections against transmission and acquisition last as long as the partnership persists without new outside partnerships. Correspondingly, these two protective effects characterise polygynous partnerships, whether or not the polygyny is formal or informal, until a partner initiates a new partnership. Stable and exclusive unions of any size protect against HIV transmission, and more durable unions provide a longer protective effect. Survey research provides little information on partnership duration in sub-Saharan Africa and sheds no light on the interaction of duration, concurrency, and HIV. This article shows how assumptions about partnership duration in individual-based sexual-network models affect the contours of simulated HIV epidemics. Longer mean partnership duration slows the pace at which simulated epidemics grow. With plausible assumptions about partnership duration and at levels of concurrency found in the region, simulated HIV epidemics grow slowly or not at all. Those results are consistent with the hypothesis that long-duration partnering is protective against HIV and inconsistent with the hypothesis that long-term concurrency drives the HIV epidemics in sub-Saharan Africa.

  11. La Concurrence et le développement

    International Development Research Centre (IDRC) Digital Library (Canada)

    Depuis 2002, le CRDI finance des recherches sur la politique de la concurrence .... Recruter un personnel expert et bien le rémunérer — Les nouvelles autorités ...... propriété par un plus grand nombre de Sud-Africains un objectif stratégique.

  12. Concurrent control system for the JAERI tandem accelerator

    International Nuclear Information System (INIS)

    Hanashima, S.; Shoji, T.; Horie, K.; Tsukihashi, Y.

    1992-01-01

    Concurrent processing with a multiprocessor system is introduced to the particle accelerator control system region. The control system is a good application in both logical and physical aspects. A renewal plan of the control system for the JAERI tandem accelerator is discussed. (author)

  13. Critical points based register-concurrency autotuning for GPUs

    NARCIS (Netherlands)

    Li, A.; Song, S.L.; Kumar, A.; Zhang, E.Z.; Chavarría-Miranda, D.; Corporaal, H.

    2016-01-01

    The unprecedented prevalence of GPGPU is largely attributed to its abundant on-chip register resources, which allow massively concurrent threads and extremely fast context switch. However, due to internal memory size constraints, there is a tradeoff between the per-thread register usage and the

  14. Concurrent Learning of Control in Multi agent Sequential Decision Tasks

    Science.gov (United States)

    2018-04-17

    Concurrent Learning of Control in Multi-agent Sequential Decision Tasks The overall objective of this project was to develop multi-agent reinforcement... learning (MARL) approaches for intelligent agents to autonomously learn distributed control policies in decentral- ized partially observable... learning of policies in Dec-POMDPs, established performance bounds, evaluated these algorithms both theoretically and empirically, The views

  15. 14 CFR 221.140 - Method of giving concurrence.

    Science.gov (United States)

    2010-01-01

    ...) Conflicting authority to be avoided. Care should be taken to avoid giving authority to two or more carriers... Aviation shall be used by a carrier to give authority to another carrier to issue and file with the... used as authority to file joint fares or charges in which the carrier to whom the concurrence is given...

  16. Selective Impairment of Auditory Selective Attention under Concurrent Cognitive Load

    Science.gov (United States)

    Dittrich, Kerstin; Stahl, Christoph

    2012-01-01

    Load theory predicts that concurrent cognitive load impairs selective attention. For visual stimuli, it has been shown that this impairment can be selective: Distraction was specifically increased when the stimulus material used in the cognitive load task matches that of the selective attention task. Here, we report four experiments that…

  17. Towards PCC for Concurrent and Distributed Systems (Work in Progress)

    Science.gov (United States)

    Henriksen, Anders S.; Filinski, Andrzej

    2009-01-01

    We outline some conceptual challenges in extending the PCC paradigm to a concurrent and distributed setting, and sketch a generalized notion of module correctness based on viewing communication contracts as economic games. The model supports compositional reasoning about modular systems and is meant to apply not only to certification of executable code, but also of organizational workflows.

  18. Sexual networks and social capital: multiple and concurrent sexual ...

    African Journals Online (AJOL)

    Multiple and concurrent sexual partnerships (MCP) are prevalent in southern Africa and have been identified as a primary cause of high HIV prevalence in this region. Sexual liaisons with multiple partners serve to increase the size and diversity of an individual's sexual — and social — network and therefore to increase their ...

  19. The Influence of Concurrent Ascaridia and Heterakis Infections of ...

    African Journals Online (AJOL)

    Blood samples from the same fowls were also collected and analyzed for PCV (%), RBC, Hb and differential white cell count using established standard procedures. Results from the study reveal a concurrent prevalence of 45.5%. Respective prevalence was in the order Ascaridia numida 56.05% and Heterakis gallinarum ...

  20. Context-Based Synchronization of Concurrent Process Using Aspect ...

    African Journals Online (AJOL)

    ... will not cause any race condition if all other threads are accessing from the same context. The result of our experiment shows that context-based synchronization performs better than Java given the same number of threads. Keywords: Aspect-oriented programming, synchronization, resource, and concurrent process.

  1. Threaded Cognition: An Integrated Theory of Concurrent Multitasking

    Science.gov (United States)

    Salvucci, Dario D.; Taatgen, Niels A.

    2008-01-01

    The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking--that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed across other available resources (e.g., perceptual…

  2. Threaded cognition : An integrated theory of concurrent multitasking

    NARCIS (Netherlands)

    Salvucci, Dario D.; Taatgen, Niels A.

    The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking-that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed

  3. Responses of rabbits to concurrent administration of Furosemide ...

    African Journals Online (AJOL)

    The intramuscular (IM) administrations of 5 mg/kg xylazine, followed 30 min later by IM of 35 mg/kg ketamine alone (XK) or concurrently with IM of 1 mg/kg furosemide (XKF), were assessed in six healthy rabbits (4 bucks and 2 does) using selected anaesthetic indices (time to onset of anaesthesia, time to onset of analgesia, ...

  4. The risks of concurrent treatment with tenofovir and aminoglycosides ...

    African Journals Online (AJOL)

    The risks of concurrent treatment with tenofovir and aminoglycosides in patients with HIV-associated tuberculosis. C Kenyon, N Wearne, R Burton, G Meintjes. Abstract. The South African public sector antiretroviral treatment (ART) guidelines have recently been changed to include tenofovir in the first-line regimen.1 ...

  5. Concurrent signal combining and channel estimation in digital communications

    Science.gov (United States)

    Ormesher, Richard C [Albuquerque, NM; Mason, John J [Albuquerque, NM

    2011-08-30

    In the reception of digital information transmitted on a communication channel, a characteristic exhibited by the communication channel during transmission of the digital information is estimated based on a communication signal that represents the digital information and has been received via the communication channel. Concurrently with the estimating, the communication signal is used to decide what digital information was transmitted.

  6. Risk factors for concurrent bacteremia in adult patients with dengue

    Directory of Open Access Journals (Sweden)

    Tun-Linn Thein

    2017-06-01

    Conclusion: Concurrent bacteremia in adult patients with dengue is uncommon but presents atypically and results in more deaths and longer hospital stay. Given the associated mortality, collection of blood cultures and empiric antibiotic therapy may be considered in patients who are critically ill.

  7. A Patient Presenting with Concurrent Testis Torsion and Epididymal Leiomyoma

    Directory of Open Access Journals (Sweden)

    E. Arpali

    2013-01-01

    Full Text Available Leiomyomas are the second most common tumors of epididymis. Patients with leiomyomas are sometimes misdiagnosed with testicular tumors. A Case of a patient with a scrotal mass presenting with testicular torsion is reported. Concurrent occurrence of testicular torsion and epididymal leiomyoma is an extremely rare condition.

  8. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Takeda, Tadashi; Sato, Kenji; Goto, Masakazu.

    1984-01-01

    Purpose: To facilitate identification of a fuel assembly upon fuel exchange in BWR type reactors. Constitution: Fluorescent material is coated or metal plating is applied to the impressed portion of a upper tie plate handle of a fuel assembly, and the fluorescent material or the metal plating surface is covered with a protective membrane made of transparent material. This enables to distinguish the impressed surface from a distant place and chemical reaction between the impressed surface and the reactor water can be prevented. Furthermore, since the protective membrane is formed such that it protrudes toward the upper side relative to the impressed surface, there is no risk of depositions of claddings thereover. (Moriyama, K.)

  9. Fuel nozzle assembly

    Science.gov (United States)

    Johnson, Thomas Edward [Greer, SC; Ziminsky, Willy Steve [Simpsonville, SC; Lacey, Benjamin Paul [Greer, SC; York, William David [Greer, SC; Stevenson, Christian Xavier [Inman, SC

    2011-08-30

    A fuel nozzle assembly is provided. The assembly includes an outer nozzle body having a first end and a second end and at least one inner nozzle tube having a first end and a second end. One of the nozzle body or nozzle tube includes a fuel plenum and a fuel passage extending therefrom, while the other of the nozzle body or nozzle tube includes a fuel injection hole slidably aligned with the fuel passage to form a fuel flow path therebetween at an interface between the body and the tube. The nozzle body and the nozzle tube are fixed against relative movement at the first ends of the nozzle body and nozzle tube, enabling the fuel flow path to close at the interface due to thermal growth after a flame enters the nozzle tube.

  10. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Ito, Arata; Wakamatsu, Mitsuo.

    1976-01-01

    Object: To permit the coolant in an FBR type reactor to enter from the entrance nozzle into a nuclear fuel assembly without causing cavitation. Structure: In a nuclear fuel assembly, which comprises a number of thin fuel pines bundled together at a uniform spacing and enclosed within an outer cylinder, with a handling head connected to an upper portion of the outer cylinder and an entrance nozzle connected to a lower portion of the cylinder, the inner surface of the entrance nozzle is provided with a buffer member and an orifice successively in the direction of flow of the coolant. The coolant entering from a low pressure coolant chamber into the entrance nozzle strikes the buffer member and is attenuated, and thereafter flows through an orifice into the outer cylinder. (Horiuchi, T.)

  11. Molten core retention assembly

    International Nuclear Information System (INIS)

    Lampe, R.F.

    1976-01-01

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods

  12. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Butterfield, R.S.; Garner, D.L.M.

    1977-01-01

    Reference is made to nuclear fuel assemblies designed for cooling on the 'tube-in-shell' principle in which the fuel is contained by a shell and is cooled by coolant passed through tubes extending through the shell. It has been proposed to employ coated particle fuel as a porous bed on the tube side and the bleed coolant from the tubes into direct contact with the fuel particles. In this way heat is extracted both by direct contact with the fuel and by heat transfer through the coolant tube walls. The system described aims to provide an improved structure of tube and shell for a fuel assembly of this kind and is particularly suitable for use in a gas cooled fast reactor, being able to withstand the neutron flux and high temperature conditions in these reactors. Constructional details are given. (U.K.)

  13. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    1975-01-01

    A description is given of a nuclear reactor fuel assembly comprising a cluster of fuel elements supported by transversal grids so that their axes are parallel to and at a distance from each other, in order to establish interstices for the axial flow of a coolant. At least one of the interstices is occupied by an axial duct reserved for an auxiliary cooling fluid and is fitted with side holes through which the auxiliary cooling fluid is sprayed into the cluster. Deflectors extend as from a transversal grid in a position opposite the holes to deflect the cooling fluid jet towards those parts of the fuel elements that are not accessible to the auxiliary coolant. This assembly is intended for reactors cooled by light or heavy water [fr

  14. Mechanical seal assembly

    Science.gov (United States)

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  15. Mechanical Seal Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kotlyar, Oleg M.

    1999-06-18

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  16. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Natori, Hisahide; Kurihara, Kunitoshi.

    1982-01-01

    Purpose: To increase the fuel safety by decreasing the gap conductance between fuels and cladding tubes, as well as improve the reactor core controllability by rendering the void coefficient negative. Constitution: Fuel assemblies in a pressure tube comprise a tie-rod, fuel rods in a central region, and fuel rods with burnable poison in the outer circumference region. Here, B 4 C is used as the burnable poison by 1.17 % by weight ratio. The degrees of enrichment for the fissile plutonium as PuO 2 -UO 2 fuel used in the assemblies are 2.7 %, 2.7 % and 1.5 % respectively in the innermost layer, the intermediate layer and the outermost layer. This increases the burn-up degree to improve the plant utilizability, whereby the void coefficient is rendered negative to improve the reactor core controllability. (Horiuchi, T.)

  17. Determinants of overweight with concurrent stunting among Ghanaian children.

    Science.gov (United States)

    Atsu, Benedicta K; Guure, Chris; Laar, Amos K

    2017-07-27

    Malnutrition (undernutrition and overnutrition) is a major public health problem in Ghana -affecting growth and development of individuals and the nation. Stunting and overweight are of particular interest, as recent national surveys show a rising trend of overnutrition and stubbornly high burden of stunting among Ghanaian children. There are currently no data on the simultaneous occurrence of overweight and stunting within individuals in Ghana. This paper presents the burden, the individual-level, and contextual determinants of overweight with concurrent stunting among Ghanaian children. This study analyzed data set of the fourth round of the Ghana Multiple Indicator Cluster Survey (MICS4). Bivariate analyses were used to describe selected characteristics of survey respondents and their children. Hierarchical modelling approach facilitated identification of significant distal, intermediate and proximal factors/determinants of concurrent stunting and overweight. Both crude and adjusted prevalence ratios via a multivariable Poison regression model with their corresponding 95% Confidence Intervals (CI) are reported. Variables with p ≤ 0.25 at the bivariate level were included in the multivariable analysis. An alpha value of 5% was used to indicate significance. Of 7550 cases (children) analyzed, the prevalence of stunting was 27.5%; underweight was 17.3%; and wasting was 7.7%. The prevalence of overweight and concurrent overweight and stunting were respectively 2.4% and 1.2%. Children who belonged to the fourth wealth quintile, were more likely to be overweight and concurrently stunted as against children belonging to the poorest quintile (aPR = 1.010; 95% CI, 1.003-1.017). Compared to religious (Christians/Muslim/Traditionalist) household heads, children whose household heads did not belong to any religion had 2 times the rates of the Overweight with concurrent stunting (PR = 2.024; 95% CI, 1.016-4.034). Children with mothers aged 20-34 and 35-49 had an

  18. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Tomihiro.

    1970-01-01

    The present invention relates to fuel assemblies employing wire wrap spacers for retaining uniform spatial distribution between fuel elements. Clad fuel elements are helically wound in the oxial direction with a wave-formed wire strand. The strand is therefore provided with spring action which permits the fuel elements to expand freely in the axial and radial directions so as to retain proper spacing and reduce stresses due to thermal deformation. (Ownes, K.J.)

  19. Assembling Toyota in Portugal

    OpenAIRE

    Machado, Tiago; Moniz, António

    2003-01-01

    A lot has been written over the last decade with regard to Toyota and the productive model associated to it (toyota-ism). And more specifically concerning the "(…) best-seller that changed the... sociological world" (Castillo, 1998: 31). But the case of Salvador Caetano’s Ovar Industrial Division (OID), that assembles Toyota light commercial vehicles in Portugal, allows us to put forward a sub-hypothesis that fits into the analysis schema proposed in the First GERPISA International Program – ...

  20. Fuel assembly manufacturing device

    International Nuclear Information System (INIS)

    Picard, P.; Villaeys, R.

    1995-01-01

    The device comprises a central support on which the frame is mounted, a magazine which supports the fuel rods in passages aligned with those in the frame and a traction assembly on the opposite side of the magazine and including an array of pull rods designed to be advanced through the passages in the frame, to grip respective fuel rods in magazine and to pull those rods into the passages on the return stroke. 13 figs

  1. Composite airfoil assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2015-03-03

    A composite blade assembly for mounting on a turbine wheel includes a ceramic airfoil and an airfoil platform. The ceramic airfoil is formed with an airfoil portion, a blade shank portion and a blade dovetail tang. The metal platform includes a platform shank and a radially inner platform dovetail. The ceramic airfoil is captured within the metal platform, such that in use, the ceramic airfoil is held within the turbine wheel independent of the metal platform.

  2. Resolution 1540, ten years on

    International Nuclear Information System (INIS)

    Hautecouverture, Benjamin

    2014-06-01

    realities of each State. By becoming an instrument in its own right of the global non-proliferation regime, Resolution 1540 has reoriented it. Firstly, WMD non-proliferation has become a norm whose scope has the nature of a general obligation. The Security Council is now also an integral stakeholder in the regime, something that has been confirmed over the past ten years: Resolution 1540 has served as grounds for various sanctions resolutions adopted by the Security Council against proliferating programmes (Iran and North Korea). Moreover, this instrument's approach has spread, and can notably be found in the current formation of a nuclear security regime, which is also based on cooperation, the creation of a specific culture, and the voluntary commitment of States. Finally, more subtly, Resolution 1540 is now constituent of a body of activities that operate in the margins of large negotiation forums and of multilateral instruments that are legally binding but either blocked or at an impasse (such as the NPT review cycle, the Conference on Disarmament, the First Committee of the UN General Assembly, etc.). As such, Resolution 1540 has fashioned a global regime that continues to make progress on the ground in spite of lasting macro-political block-ages. Resolution 1540 is discrete; and the global non-proliferation regime needs it. (author)

  3. Fourth Doctoral Student Assembly

    CERN Multimedia

    Ingrid Haug

    2016-01-01

    On 10 May, over 130 PhD students and their supervisors, from both CERN and partner universities, gathered for the 4th Doctoral Student Assembly in the Council Chamber.   The assembly was followed by a poster session, at which eighteen doctoral students presented the outcome of their scientific work. The CERN Doctoral Student Programme currently hosts just over 200 students in applied physics, engineering, computing and science communication/education. The programme has been in place since 1985. It enables students to do their research at CERN for a maximum of three years and to work on a PhD thesis, which they defend at their University. The programme is steered by the TSC committee, which holds two selection committees per year, in June and December. The Doctoral Student Assembly was opened by the Director-General, Fabiola Gianotti, who stressed the importance of the programme in the scientific environment at CERN, emphasising that there is no more rewarding activity than lear...

  4. Metrology for ITER Assembly

    International Nuclear Information System (INIS)

    Bogusch, E.

    2006-01-01

    The overall dimensions of the ITER Tokamak and the particular assembly sequence preclude the use of conventional optical metrology, mechanical jigs and traditional dimensional control equipment, as used for the assembly of smaller, previous generation, fusion devices. This paper describes the state of the art of the capabilities of available metrology systems, with reference to the previous experience in Fusion engineering and in other industries. Two complementary procedures of transferring datum from the primary datum network on the bioshield to the secondary datum s inside the VV with the desired accuracy of about 0.1 mm is described, one method using the access directly through the ports and the other using transfer techniques, developed during the co-operation with ITER/EFDA. Another important task described is the development of a method for the rapid and easy measurement of the gaps between sectors, required for the production of the customised splice plates between them. The scope of the paper includes the evaluation of the composition and cost of the systems and team of technical staff required to meet the requirements of the assembly procedure. The results from a practical, full-scale demonstration of the methodologies used, using the proposed equipment, is described. This work has demonstrated the feasibility of achieving the necessary accuracies for the successful building of ITER. (author)

  5. Ordinary General Assembly

    CERN Multimedia

    Association du personnel

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Modifications to the statutes of the association Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda...

  6. SCT Barrel Assembly Complete

    CERN Multimedia

    L. Batchelor

    As reported in the April 2005 issue of the ATLAS eNews, the first of the four Semiconductor Tracker (SCT) barrels, complete with modules and services, arrived safely at CERN in January of 2005. In the months since January, the other three completed barrels arrived as well, and integration of the four barrels into the entire barrel assembly commenced at CERN, in the SR1 building on the ATLAS experimental site, in July. Assembly was completed on schedule in September, with the addition of the innermost layer to the 4-barrel assembly. Work is now underway to seal the barrel thermal enclosure. This is necessary in order to enclose the silicon tracker in a nitrogen atmosphere and provide it with faraday-cage protection, and is a delicate and complicated task: 352 silicon module powertapes, 352 readout-fibre bundles, and over 400 Detector Control System sensors must be carefully sealed into the thermal enclosure bulkhead. The team is currently verifying the integrity of the low mass cooling system, which must be d...

  7. High-resolution ultrasonic spectroscopy

    Directory of Open Access Journals (Sweden)

    V. Buckin

    2018-03-01

    Full Text Available High-resolution ultrasonic spectroscopy (HR-US is an analytical technique for direct and non-destructive monitoring of molecular and micro-structural transformations in liquids and semi-solid materials. It is based on precision measurements of ultrasonic velocity and attenuation in analysed samples. The application areas of HR-US in research, product development, and quality and process control include analysis of conformational transitions of polymers, ligand binding, molecular self-assembly and aggregation, crystallisation, gelation, characterisation of phase transitions and phase diagrams, and monitoring of chemical and biochemical reactions. The technique does not require optical markers or optical transparency. The HR-US measurements can be performed in small sample volumes (down to droplet size, over broad temperature range, at ambient and elevated pressures, and in various measuring regimes such as automatic temperature ramps, titrations and measurements in flow.

  8. Concurrent measurement of "real-world" stress and arousal in individuals with psychosis: assessing the feasibility and validity of a novel methodology.

    Science.gov (United States)

    Kimhy, David; Delespaul, Philippe; Ahn, Hongshik; Cai, Shengnan; Shikhman, Marina; Lieberman, Jeffrey A; Malaspina, Dolores; Sloan, Richard P

    2010-11-01

    Psychosis has been repeatedly suggested to be affected by increases in stress and arousal. However, there is a dearth of evidence supporting the temporal link between stress, arousal, and psychosis during "real-world" functioning. This paucity of evidence may stem from limitations of current research methodologies. Our aim is to the test the feasibility and validity of a novel methodology designed to measure concurrent stress and arousal in individuals with psychosis during "real-world" daily functioning. Twenty patients with psychosis completed a 36-hour ambulatory assessment of stress and arousal. We used experience sampling method with palm computers to assess stress (10 times per day, 10 AM → 10 PM) along with concurrent ambulatory measurement of cardiac autonomic regulation using a Holter monitor. The clocks of the palm computer and Holter monitor were synchronized, allowing the temporal linking of the stress and arousal data. We used power spectral analysis to determine the parasympathetic contributions to autonomic regulation and sympathovagal balance during 5 minutes before and after each experience sample. Patients completed 79% of the experience samples (75% with a valid concurrent arousal data). Momentary increases in stress had inverse correlation with concurrent parasympathetic activity (ρ = -.27, P feasibility and validity of our methodology in individuals with psychosis. The methodology offers a novel way to study in high time resolution the concurrent, "real-world" interactions between stress, arousal, and psychosis. The authors discuss the methodology's potential applications and future research directions.

  9. Evaluation of GRCh38 and de novo haploid genome assemblies demonstrates the enduring quality of the reference assembly.

    Science.gov (United States)

    Schneider, Valerie A; Graves-Lindsay, Tina; Howe, Kerstin; Bouk, Nathan; Chen, Hsiu-Chuan; Kitts, Paul A; Murphy, Terence D; Pruitt, Kim D; Thibaud-Nissen, Françoise; Albracht, Derek; Fulton, Robert S; Kremitzki, Milinn; Magrini, Vincent; Markovic, Chris; McGrath, Sean; Steinberg, Karyn Meltz; Auger, Kate; Chow, William; Collins, Joanna; Harden, Glenn; Hubbard, Timothy; Pelan, Sarah; Simpson, Jared T; Threadgold, Glen; Torrance, James; Wood, Jonathan M; Clarke, Laura; Koren, Sergey; Boitano, Matthew; Peluso, Paul; Li, Heng; Chin, Chen-Shan; Phillippy, Adam M; Durbin, Richard; Wilson, Richard K; Flicek, Paul; Eichler, Evan E; Church, Deanna M

    2017-05-01

    The human reference genome assembly plays a central role in nearly all aspects of today's basic and clinical research. GRCh38 is the first coordinate-changing assembly update since 2009; it reflects the resolution of roughly 1000 issues and encompasses modifications ranging from thousands of single base changes to megabase-scale path reorganizations, gap closures, and localization of previously orphaned sequences. We developed a new approach to sequence generation for targeted base updates and used data from new genome mapping technologies and single haplotype resources to identify and resolve larger assembly issues. For the first time, the reference assembly contains sequence-based representations for the centromeres. We also expanded the number of alternate loci to create a reference that provides a more robust representation of human population variation. We demonstrate that the updates render the reference an improved annotation substrate, alter read alignments in unchanged regions, and impact variant interpretation at clinically relevant loci. We additionally evaluated a collection of new de novo long-read haploid assemblies and conclude that although the new assemblies compare favorably to the reference with respect to continuity, error rate, and gene completeness, the reference still provides the best representation for complex genomic regions and coding sequences. We assert that the collected updates in GRCh38 make the newer assembly a more robust substrate for comprehensive analyses that will promote our understanding of human biology and advance our efforts to improve health. © 2017 Schneider et al.; Published by Cold Spring Harbor Laboratory Press.

  10. Improvement of psychiatric symptoms in youth following resolution of sinusitis.

    Science.gov (United States)

    Mahony, Talia; Sidell, Douglas; Gans, Hayley; Brown, Kayla; Farhadian, Bahare; Gustafson, Melissa; Sherr, Janell; Thienemann, Margo; Frankovich, Jennifer

    2017-01-01

    Accumulating evidence supports a role for inflammation in psychiatric illness, and the onset or exacerbation of psychiatric symptoms may follow non-CNS infections. Here, we provide the first detailed description of obsessive-compulsive and related psychiatric symptoms arising concurrently with sinusitis. We reviewed the charts of 150 consecutive patients evaluated in our Pediatric Acute-onset Neuropsychiatric Syndromes clinic for documented sinusitis as defined by the American Academy of Pediatrics guidelines. Sinusitis treatments, sinonasal imaging, and neuropsychiatric symptoms before, during, and after sinusitis onset were noted. Patients were included in the final review if they had a clear diagnosis of isolated sinusitis (without concurrent illness and/or immunodeficiency), and were evaluated during an episode of sinusitis. 10/150 (6.6%) patients had isolated sinusitis at the time of their neuropsychiatric deterioration. Eight patients received antibiotics to treat sinusitis, three of whom also received sinus surgery. Neuropsychiatric symptoms improved in all eight patients concurrent with resolution of sinusitis per parent report and clinician assessment. One patient did not follow through with recommended sinus surgery or antibiotics and her psychiatric symptoms persisted. One patient was lost to follow-up. Improvement of psychiatric symptoms correlated with resolution of sinus disease in this retrospective study. Identification, treatment, and resolution of underlying infections, including sinusitis, may have the potential to change the trajectory of some neuropsychiatric illnesses. Randomized clinical trials are needed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  11. Latest Insights on Adenovirus Structure and Assembly

    Directory of Open Access Journals (Sweden)

    Carmen San Martín

    2012-05-01

    Full Text Available Adenovirus (AdV capsid organization is considerably complex, not only because of its large size (~950 Å and triangulation number (pseudo T = 25, but also because it contains four types of minor proteins in specialized locations modulating the quasi-equivalent icosahedral interactions. Up until 2009, only its major components (hexon, penton, and fiber had separately been described in atomic detail. Their relationships within the virion, and the location of minor coat proteins, were inferred from combining the known crystal structures with increasingly more detailed cryo-electron microscopy (cryoEM maps. There was no structural information on assembly intermediates. Later on that year, two reports described the structural differences between the mature and immature adenoviral particle, starting to shed light on the different stages of viral assembly, and giving further insights into the roles of core and minor coat proteins during morphogenesis [1,2]. Finally, in 2010, two papers describing the atomic resolution structure of the complete virion appeared [3,4]. These reports represent a veritable tour de force for two structural biology techniques: X-ray crystallography and cryoEM, as this is the largest macromolecular complex solved at high resolution by either of them. In particular, the cryoEM analysis provided an unprecedented clear picture of the complex protein networks shaping the icosahedral shell. Here I review these latest developments in the field of AdV structural studies.

  12. Super-resolution

    DEFF Research Database (Denmark)

    Nasrollahi, Kamal; Moeslund, Thomas B.

    2014-01-01

    Super-resolution, the process of obtaining one or more high-resolution images from one or more low-resolution observations, has been a very attractive research topic over the last two decades. It has found practical applications in many real world problems in different fields, from satellite...

  13. Liner mounting assembly

    Science.gov (United States)

    Halila, Ely E. (Inventor)

    1994-01-01

    A mounting assembly includes an annular supporting flange disposed coaxially about a centerline axis which has a plurality of circumferentially spaced apart supporting holes therethrough. An annular liner is disposed coaxially with the supporting flange and includes a plurality of circumferentially spaced apart mounting holes aligned with respective ones of the supporting holes. Each of a plurality of mounting pins includes a proximal end fixedly joined to the supporting flange through a respective one of the supporting holes, and a distal end disposed through a respective one of the liner mounting holes for supporting the liner to the supporting flange while unrestrained differential thermal movement of the liner relative to the supporting flange.

  14. Modelling Polar Self Assembly

    Science.gov (United States)

    Olvera de La Cruz, Monica; Sayar, Mehmet; Solis, Francisco J.; Stupp, Samuel I.

    2001-03-01

    Recent experimental studies in our group have shown that self assembled thin films of noncentrosymmetric supramolecular objects composed of triblock rodcoil molecules exhibit finite polar order. These aggregates have both long range dipolar and short range Ising-like interactions. We study the ground state of a simple model with these competing interactions. We find that the competition between Ising-like and dipolar forces yield a periodic domain structure, which can be controlled by adjusting the force constants and film thickness. When the surface forces are included in the potential, the system exhibits a finite macroscopic polar order.

  15. Nuclear reactor core assembly

    International Nuclear Information System (INIS)

    Baxi, C.B.

    1978-01-01

    The object of the present invention is to provide a fast reactor core assembly design for use with a fluid coolant such as liquid sodium or carbon monoxide incorporating a method of increasing the percentage of coolant flow though the blanket elements relative to the total coolant flow through the blanket and fuel elements during shutdown conditions without using moving parts. It is claimed that deterioration due to reactor radiation or temperature conditions is avoided and ready modification or replacement is possible. (U.K.)

  16. Learning from Mistakes --- A Comprehensive Study on Real World Concurrency Bug Characteristics

    International Nuclear Information System (INIS)

    Shan Lu; Soyeon Park; Eunsoo Seo; Yuanyuan Zhou

    2008-01-01

    The reality of multi-core hardware has made concurrent programs pervasive. Unfortunately, writing correct concurrent programs is difficult. Addressing this challenge requires advances in multiple directions, including concurrency bug detection, concurrent program testing, concurrent programming model design, etc. Designing effective techniques in all these directions will significantly benefit from a deep understanding of real world concurrency bug characteristics. This paper provides the first (to the best of our knowledge) comprehensive real world concurrency bug characteristic study. Specifically, we have carefully examined concurrency bug patterns, manifestation, and fix strategies of 105 randomly selected real world concurrency bugs from 4 representative server and client opensource applications (MySQL, Apache, Mozilla and OpenOffice). Our study reveals several interesting findings and provides useful guidance for concurrency bug detection, testing, and concurrent programming language design. Some of our findings are as follows: (1) Around one third of the examined non-deadlock concurrency bugs are caused by violation to programmers order intentions, which may not be easily expressed via synchronization primitives like locks and transactional memories; (2) Around 34% of the examined non-deadlock concurrency bugs involve multiple variables, which are not well addressed by existing bug detection tools; (3) About 92% of the examined concurrency bugs can be reliably triggered by enforcing certain orders among no more than 4 memory accesses. This indicates that testing concurrent programs can target at exploring possible orders among every small groups of memory accesses, instead of among all memory accesses; (4) About 73% of the examined non-deadlock concurrency bugs were not fixed by simply adding or changing locks, and many of the fixes were not correct at the first try, indicating the difficulty of reasoning concurrent execution by programmers.

  17. Criteria for inhalation exposure systems utilizing concurrent flow spirometry

    International Nuclear Information System (INIS)

    Raabe, O.G.; Yeh, H.C.

    1974-01-01

    Principles are given for the design and operation of a new class of inhalation exposure systems utilizing concurrent flow spirometry (CFS), a simple method for providing realtime measurement of respiratory volumes and rates during inhalation exposure by mouth or nose of individual experimental animals or man to aerosols or gases. This technique is especially useful for inhalation exposure of larger experimental animals, such as horses, where whole-body plethysmography is usually impractical. Difficulties encountered with conventional exposure systems in maintenance of uniform aerosol or gas concentrations and prevention of large pressure excursions in the exposure chamber during breathing are obviated by systems utilizing the principles of concurrent flow spirometry. For illustration, two exposure units with CFS are described, one for exposure of Beagle dogs and one for ponies. (U.S.)

  18. Triangle inequalities in coherence measures and entanglement concurrence

    Science.gov (United States)

    Dai, Yue; You, Wenlong; Dong, Yuli; Zhang, Chengjie

    2017-12-01

    We provide detailed proofs of triangle inequalities in coherence measures and entanglement concurrence. If a rank-2 state ϱ can be expressed as a convex combination of two pure states, i.e., ϱ =p1| ψ1〉〈 ψ1|+ p2| ψ2〉〈 ψ2| , a triangle inequality can be established as |E (|Ψ1〉 )-E (|Ψ2〉 )|≤E (ϱ ) ≤E (|Ψ1〉 )+E (|Ψ2〉 ) , where | Ψ1〉= √{p1}|ψ1〉 and | Ψ2〉= √{p2}|ψ2〉 ; E can be considered either coherence measures or entanglement concurrence. This inequality displays mathematical beauty for its similarity to the triangle inequality in plane geometry. An illustrative example is given after the proof.

  19. Concurrent periosteal chondroma and enchondroma of the fibula mimicking chondrosarcoma

    International Nuclear Information System (INIS)

    Yamamoto, Yasuhiro; Washimi, Osuke; Yamada, Harumoto; Washimi, Yuki; Itoh, Masato; Kuroda, Makoto

    2006-01-01

    We present a rare concurrence of enchondroma and periosteal chondroma in the right distal fibula that mimicked chondrosarcoma in a 13-year-old boy. Radiographs and CT scans showed a periosteal lesion producing saucerization without periosteal reaction and calcification in the distal metaphysis of the right fibula. MRI showed an intramedullary lesion adjacent to the periosteal lesion, although it was invisible at CT. There was no cortical breach on imaging and gross examination. Because both lesions represented benign cartilaginous tumors on histology, concurrent periosteal chondroma and enchondroma of the fibula was diagnosed. This combination in the same bone in a patient without enchondromatosis is exceedingly rare. Such imaging features may be confused with those of chondrosarcoma. (orig.)

  20. Concurrent periosteal chondroma and enchondroma of the fibula mimicking chondrosarcoma

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Yasuhiro; Washimi, Osuke; Yamada, Harumoto; Washimi, Yuki; Itoh, Masato [Fujita Health University, Department of Orthopedic Surgery, Toyoake City, Aichi (Japan); Kuroda, Makoto [Fujita Health University, Department of Pathology, Toyoake City, Aichi (Japan)

    2006-05-15

    We present a rare concurrence of enchondroma and periosteal chondroma in the right distal fibula that mimicked chondrosarcoma in a 13-year-old boy. Radiographs and CT scans showed a periosteal lesion producing saucerization without periosteal reaction and calcification in the distal metaphysis of the right fibula. MRI showed an intramedullary lesion adjacent to the periosteal lesion, although it was invisible at CT. There was no cortical breach on imaging and gross examination. Because both lesions represented benign cartilaginous tumors on histology, concurrent periosteal chondroma and enchondroma of the fibula was diagnosed. This combination in the same bone in a patient without enchondromatosis is exceedingly rare. Such imaging features may be confused with those of chondrosarcoma. (orig.)

  1. Concurrent Use of Cannabis and Alcohol: Neuropsychiatric Effect Consequences.

    Science.gov (United States)

    Romaguera, Anna; Torrens, Marta; Papaseit, Esther; Arellano, Ana Lucia; Farré, Magi

    2017-01-01

    Concurrent use of cannabis and alcohol is frequent. According different studies, the prevalence is among 20-34% depending on different samples studied. In contrast with the wide evidence available about neuropsychiatric effects associated to the use of cannabis or alcohol separately, there are few studies of the neuropsychiatric effects of their combination. Our aim was to review the literature regarding this topic. We performed a search in MEDLINE and from 114 potentially eligible studies, 27 were selected. Most of them studied the relation between cannabis and alcohol, and with them combined to other substances of abuse, but only a few considered their concurrent effect among mental disorders (ADHD, bipolar disorder) and neuropsychological performance. More research in the neuropsychiatric effects of the concomitant use of cannabis and alcohol is needed. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  2. Winning Concurrent Reachability Games Requires Doubly-Exponential Patience

    DEFF Research Database (Denmark)

    Hansen, Kristoffer Arnsfelt; Koucký, Michal; Miltersen, Peter Bro

    2009-01-01

    We exhibit a deterministic concurrent reachability game PURGATORYn with n non-terminal positions and a binary choice for both players in every position so that any positional strategy for Player 1 achieving the value of the game within given isin ... that are less than (isin2/(1 - isin))2n-2 . Also, even to achieve the value within say 1 - 2-n/2, doubly exponentially small behavior probabilities in the number of positions must be used. This behavior is close to worst case: We show that for any such game and 0 ... with all non-zero behavior probabilities being 20(n) at least isin2O(n). As a corollary to our results, we conclude that any (deterministic or nondeterministic) algorithm that given a concurrent reachability game explicitly manipulates isin-optimal strategies for Player 1 represented in several standard...

  3. Monomial strategies for concurrent reachability games and other stochastic games

    DEFF Research Database (Denmark)

    Frederiksen, Søren Kristoffer Stiil; Miltersen, Peter Bro

    2013-01-01

    We consider two-player zero-sum finite (but infinite-horizon) stochastic games with limiting average payoffs. We define a family of stationary strategies for Player I parameterized by ε > 0 to be monomial, if for each state k and each action j of Player I in state k except possibly one action, we...... have that the probability of playing j in k is given by an expression of the form c ε d for some non-negative real number c and some non-negative integer d. We show that for all games, there is a monomial family of stationary strategies that are ε-optimal among stationary strategies. A corollary...... is that all concurrent reachability games have a monomial family of ε-optimal strategies. This generalizes a classical result of de Alfaro, Henzinger and Kupferman who showed that this is the case for concurrent reachability games where all states have value 0 or 1....

  4. An Intensional Concurrent Faithful Encoding of Turing Machines

    Directory of Open Access Journals (Sweden)

    Thomas Given-Wilson

    2014-10-01

    Full Text Available The benchmark for computation is typically given as Turing computability; the ability for a computation to be performed by a Turing Machine. Many languages exploit (indirect encodings of Turing Machines to demonstrate their ability to support arbitrary computation. However, these encodings are usually by simulating the entire Turing Machine within the language, or by encoding a language that does an encoding or simulation itself. This second category is typical for process calculi that show an encoding of lambda-calculus (often with restrictions that in turn simulates a Turing Machine. Such approaches lead to indirect encodings of Turing Machines that are complex, unclear, and only weakly equivalent after computation. This paper presents an approach to encoding Turing Machines into intensional process calculi that is faithful, reduction preserving, and structurally equivalent. The encoding is demonstrated in a simple asymmetric concurrent pattern calculus before generalised to simplify infinite terms, and to show encodings into Concurrent Pattern Calculus and Psi Calculi.

  5. A familial concurrence of schizophrenia and Gaucher's disease

    Directory of Open Access Journals (Sweden)

    Siomos Konstantinos E

    2007-12-01

    Full Text Available Abstract Background Gaucher's disease (GD is the most frequently encountered lysosomal storage disease. Here, we describe and discuss the observed concurrence of schizophrenia and Gaucher's disease in two siblings. Methods Presentation of a family with two siblings with Gaucher's disease. Results In a six-member family, the first son suffers from schizophrenia, while the third and fourth sons suffer from the Gaucher's disease (type 1 non-neuronopathic. The parents and the second son do not suffer from either illness. Conclusion The concurrence of schizophrenia and Gaucher's disease in the same family is an unusual phenomenon. The literature regarding this coincidence is limited, despite the fact that patients with Gaucher's disease have one or two mutated alleles, considered to be a risk factor leading to conditions such as Dementia, Parkinson's disease and schizophrenia.

  6. Association between concurrent alcohol and tobacco use and poverty.

    Science.gov (United States)

    de Silva, Varuni; Samarasinghe, Diyanath; Hanwella, Raveen

    2011-01-01

    The harm from alcohol and tobacco use in low- and middle-income countries includes substantial economic cost to the individual. Our aim was to describe the expenditure on concurrent alcohol and tobacco use in relation to family income in two districts in Sri Lanka. A community-based cross-sectional study was carried out in two districts in Sri Lanka. We sampled 2684 men over 18 years of age using multistage cluster sampling. Cost of alcohol and cigarettes was calculated using the retail price for each brand and multiplying by the amount consumed. Among current alcohol users 63.1% were also smokers. Among current smokers 61.9% were also using alcohol. Prevalence of concurrent alcohol and tobacco use in urban areas was 20.1% and in rural areas 14%. The two lowest income categories (meaning in such settings. © 2010 Australasian Professional Society on Alcohol and other Drugs.

  7. Non-Blocking Concurrent Imperative Programming with Session Types

    Directory of Open Access Journals (Sweden)

    Miguel Silva

    2017-01-01

    Full Text Available Concurrent C0 is an imperative programming language in the C family with session-typed message-passing concurrency. The previously proposed semantics implements asynchronous (non-blocking output; we extend it here with non-blocking input. A key idea is to postpone message reception as much as possible by interpreting receive commands as a request for a message. We implemented our ideas as a translation from a blocking intermediate language to a non-blocking language. Finally, we evaluated our techniques with several benchmark programs and show the results obtained. While the abstract measure of span always decreases (or remains unchanged, only a few of the examples reap a practical benefit.

  8. Process for carrying out analyses based on concurrent reactions

    Energy Technology Data Exchange (ETDEWEB)

    Glover, J S; Shepherd, B P

    1980-01-03

    The invention refers to a process for carrying out analyses based on concurrent reactions. A part of a compound to be analysed is subjected with a standard quantity of this compound in a labelled form to a common reaction with a standard quantity of a reagent, which must be less than the sum of the two parts of the reacting compound. The parts of the marked reaction compound and the labelled final compound resulting from the concurrence are separated in a tube (e.g. by centrifuging) after forced phase change (precipitation, absorption etc.) and the radio-activity of both phases in contact is measured separately. The shielded measuring device developed for this and suitable for centrifuge tubes of known dimensions is also included in the patent claims. The insulin concentration of a defined serum is measured as an example of the applications of the method (Radioimmunoassay).

  9. Reducing Concurrency Bottlenecks in Parallel I/O Workloads

    Energy Technology Data Exchange (ETDEWEB)

    Manzanares, Adam C. [Los Alamos National Laboratory; Bent, John M. [Los Alamos National Laboratory; Wingate, Meghan [Los Alamos National Laboratory

    2011-01-01

    To enable high performance parallel checkpointing we introduced the Parallel Log Structured File System (PLFS). PLFS is middleware interposed on the file system stack to transform concurrent writing of one application file into many non-concurrently written component files. The promising effectiveness of PLFS makes it important to examine its performance for workloads other than checkpoint capture, notably the different ways that state snapshots may be later read, to make the case for using PLFS in the Exascale I/O stack. Reading a PLFS file involved reading each of its component files. In this paper we identify performance limitations on broader workloads in an early version of PLFS, specifically the need to build and distribute an index for the overall file, and the pressure on the underlying parallel file system's metadata server, and show how PLFS's decomposed components architecture can be exploited to alleviate bottlenecks in the underlying parallel file system.

  10. Cooperative Planning, Uncertainty, and Managerial Control in Concurrent Design

    OpenAIRE

    Victoria L. Mitchell; Barrie R. Nault

    2007-01-01

    We examine whether cooperative planning and uncertainty affect the magnitude of rework in concurrent engineering projects with upstream and downstream operations, and explore the impact of such rework on project delays. Using survey data from a sample of 120 business process (BP) redesign and related information technology (IT) development projects in healthcare and telecommunications, our results indicate that upstream (BP) rework and downstream (IT) rework is mediated and mitigated by coope...

  11. Prostatic Adenocarcinoma with Concurrent Sertoli Cell Tumor in a Dog

    Science.gov (United States)

    Gill, C. W.

    1981-01-01

    A case of metastatic prostatic adenocarcinoma with concurrent Sertoli cell tumor is presented in an old, miniature Schnauzer dog. The prostatic neoplasm was highly anaplastic and had metastasized widely. Clinical signs were compatible with increased estrogen production. It is interesting to note that the prostatic carcinoma, usually considered to be androgen dependent, developed and metastasized, despite the presence of apparently increased estrogen levels. ImagesFigure 1.Figure 2.Figure 3.Figure 4.Figure 5.Figure 6. PMID:7340923

  12. The Application of Concurrent Engineering in Infrastructure Projects

    OpenAIRE

    Wolden, Sigurd

    2017-01-01

    The construction industry today is considered to be lagging competitively behind in comparison to other industries. The reason for this is thought of by many researchers to be the fragmented project process, the traditional principles and the, sometimes adversarial environment. In order to solve some of these obstacles and at the same time enhance productivity, the Norwegian infrastructure sector has recently developed an interest towards the project management method Concurrent Engineering (...

  13. Irritable bowel syndrome: The incidence of concurrent psychopathology

    OpenAIRE

    Margie H Wilson; Anita D Stuart; H Gertie Pretorius

    1999-01-01

    The goal of this study was to improve understanding of the association between physiology and psychology in Functional Gastrointestinal disorders by considering the co-morbidity of lrritable Bowel Syndrome and psychopathology in a sector of the South African population. A comparison was made between the incidence of concurrent psychopathology in a sample of 48 white female patients, aged 25 to 55 years and diagnosed with lrritable Bowel Syndrome and the incidence of psychopathology in a contr...

  14. A Concurrent Programming Language for Arduino and Educational Robotics

    OpenAIRE

    Morán, Ricardo; Teragni, Matías; Zabala, Gonzalo

    2017-01-01

    Arduino is currently one of the most popular platforms for educational robotics due to its low cost and large amount of available resources online. The Arduino software library provides an abstraction layer over the hardware details, making it possible for novices to build interesting projects. However, its lack of support for concurrency makes some educational robotics projects difficult. In this paper, we explore different approaches to solve this problem and we propose the implementation o...

  15. Rain: A New Concurrent Process-Oriented Programming Language

    OpenAIRE

    Brown, Neil C.C.

    2006-01-01

    This paper details the design of a new concurrent process-oriented programming language, Rain. The language borrows heavily from occam-p and C++ to create a new language based on process-oriented programming, marrying channel-based communication, a clear division between statement and expression, and elements of functional programming. An expressive yet simple type system, coupled with templates, underpins the language. Modern features such as Unicode support and 64-bit integers are included ...

  16. Personality and Career Success: Concurrent and Longitudinal Relations

    OpenAIRE

    Sutin, Angelina R.; Costa, Paul T.; Miech, Richard; Eaton, William W.

    2009-01-01

    The present research addresses the dynamic transaction between extrinsic (occupational prestige, income) and intrinsic (job satisfaction) career success and the Five-Factor Model of personality. Participants (N = 731) completed a comprehensive measure of personality and reported their job title, annual income, and job satisfaction; a subset of these participants (n = 302) provided the same information approximately 10 years later. Measured concurrently, emotionally stable and conscientious pa...

  17. Cauldrons: An Abstraction for Concurrent Problems Solving. Revision.

    Science.gov (United States)

    1986-09-01

    PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory ARtA G WORK UNIT NUMVERS S 545 Technology Square etJ Cambridge, MA 02139 TIM II...D-11194 12611 CAU1,LDRONS: AN ROSTRACTION FOR CONCURRENT PROBLEMS1/ RSOLVING REYISION(U) MASSACHUSETTS INST OF TECHCANIRIDGE ARTIFICIAL INTELLIGENCE...is described, accompanied by cxanmple of their application to various domains. ’lhis report describes research done at both the MIT Artificial

  18. Management and Surgical Outcomes of Concurrent Tuberculosis and Lung Cancer.

    Science.gov (United States)

    Evman, Serdar; Baysungur, Volkan; Alpay, Levent; Uskul, Bahadir; Misirlioglu, Aysun Kosif; Kanbur, Serda; Dogruyol, Talha

    2017-10-01

    Background  Concurrent pulmonary tuberculosis (TB) and lung cancer are rarely encountered in Western countries; however, it is more common in developing countries. We aim to share the diagnostic and treatment approaches in this study. Materials and Methods  Clinical files of all patients undergoing lung resection for non-small cell carcinoma with concurrent pulmonary TB between February 2006 and December 2012 were investigated retrospectively in terms of patient characteristics, operation methods, definite pathology and stage of tumor, postoperative treatment schemes, and associated complications. Results  TB was detected in 17 (1.3%) of 1,266 operated carcinoma patients. Eleven had squamous cell carcinoma and six had adenocarcinoma. Mean age was 54.9 years. Two patients received anti-TB treatment preoperatively. Fifteen patients were given anti-TB treatment postoperatively, as soon as definite microbiological confirmation was obtained, and concurrently given adjuvant therapy after 3 weeks of sole four-drug TB treatment. Pneumonectomy was performed in four (23.5%), sleeve lobectomy in three (17.6%), lobectomy in eight (47%), and bilobectomy in two (11.7%) patients. Postoperative complications occurred in four (23.5%) patients, with bronchopleural fistula being seen in only one pneumonectomy patient. No postoperative mortality or reactivation of TB was seen. Mean survival time was 32 ± 2 months. Conclusion  Resection following a 3-week anti-TB treatment or concurrent anti-TB and postoperative adjuvant chemotherapy does not constitute an additional postoperative risk for patients with concomitant lung malignancy and pulmonary TB. The determination of optimum treatment for these patients presents a challenge in developing countries, where TB is still a common disease. Georg Thieme Verlag KG Stuttgart · New York.

  19. Actors: A Model of Concurrent Computation in Distributed Systems.

    Science.gov (United States)

    1985-06-01

    Artificial Intelligence Labora- tory of the Massachusetts Institute of Technology. Support for the labora- tory’s aritificial intelligence research is...RD-A157 917 ACTORS: A MODEL OF CONCURRENT COMPUTATION IN 1/3- DISTRIBUTED SY𔃿TEMS(U) MASSACHUSETTS INST OF TECH CRMBRIDGE ARTIFICIAL INTELLIGENCE ...Computation In Distributed Systems Gui A. Aghai MIT Artificial Intelligence Laboratory Thsdocument ha. been cipp-oved I= pblicrelease and sale; itsI

  20. Concurrent Smalltalk on the Message-Driven Processor

    Science.gov (United States)

    1991-09-01

    language close to Concurrent Smalltalk and having an almost identical name is CONCURRENTSMALLTALK [39] [40] independently developed by Yasuhiko Yokote and...Laboratory Memo 1044, October 1988. [391 Yokote, Yasuhiko , and Tokoro, Mario. ’The Design and Implementation of Concur- rentSmalltalk." Proceedings...of the 1986 Object-Oriented Programming Systems, Lan- guages, and Applications Conference, September 1986. 222 Bibliography [401 Yokote, Yasuhiko , and

  1. Concurrent split cord malformation and teratoma: dysembryology, presentation, and treatment.

    Science.gov (United States)

    Babu, Ranjith; Reynolds, Renee; Moreno, Jessica R; Cummings, Thomas J; Bagley, Carlos A

    2014-02-01

    Split cord malformation (SCM) is a rare form of spinal dysraphism in which the spinal cord is divided in the sagittal plane, forming a double neural tube. In addition to being associated with a variety of malformations, SCM may occur with spinal cord tumors, with only exceptional cases involving teratomas. As only eight patients with a teratoma associated with SCM have been reported, their presentation characteristics and treatment are currently unclear. We review the literature of all patients with SCM with concurrent spinal teratoma, discuss the potential dysembryology, and report the first case of SCM with concurrent spinal teratoma in an elderly patient. The mean age of those with concurrent SCM and teratomas was 39.4 years, with 55.6% occurring in females. The lumbar spine was the most frequent location for teratomas (66.7%), with the Type II malformation more commonly occurring with these tumors (75%). The duration of symptoms varied widely, ranging from 1 month to 5 years, with the average duration being nearly 2 years. Back pain (87.5%) and lower extremity weakness (75%) were the most common presenting symptoms. As SCM may be associated with progressive neurological deterioration and teratomas can contain immature or malignant components, surgery should be attempted with the goal of gross total resection. Nonetheless, in patients with a concurrent tumor and spinal dysraphism, spinal teratomas should be considered in the differential diagnosis. Gross total resection of these lesions may be safely achieved even in the presence of SCM using intraoperative electrophysiologic monitoring. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Progress of EMBarrel assembly

    CERN Multimedia

    Chalifour, M

    2002-01-01

    The assembly of the sixteen "M" modules into a vertical axis cylinder has been achieved last Friday, completing the first wheel of the Electromagnetic Barrel Calorimeter (see picture). With this, an important milestone in the construction of the ATLAS detector has been reached. Future steps are the rotation of the cylinder axis into horizontal position, in order to integrate the presamplers and heat exchangers by the end of October. The transportation of the wheel and its insertion into the cryostat is the next major milestone, and is planned for the beginning of 2003. The construction of the modules (the so-called "P" modules) of the second wheel is ongoing at Saclay, Annecy and CERN, and will be completed in the coming months. The assembly of the second wheel should start at CERN in February, and its insertion in the cryostat is scheduled for June 2003. This achievement is the result of a successful collaboration of all institutes involved in the construction of the EM Barrel, namely Annecy, Saclay and CE...

  3. Fuel assembly supporting structure

    International Nuclear Information System (INIS)

    Aisch, F.W.; Fuchs, H.P.; Knoedler, D.; Steinke, A.; Steven, J.

    1976-01-01

    For use in forming the core of a pressurized-water reactor, a fuel assembly supporting structure for holding a bundle of interspaced fuel rods, is formed by interspaced end pieces having holes in which the end portions of control rod guide tubes are inserted, fuel rod spacer grids being positioned by these guide tubes between the end pieces. The end pieces are fastened to the end portions of the guide tubes, to integrate the supporting structure, and in the case of at least one of the end pieces, this is done by means which releases that end piece from the guide tubes when the end pieces receive an abnormal thrust force directed towards each other and which would otherwise place the guide tubes under a compressive stress that would cause them to buckle. The spacer grids normally hold the fuel rods interspaced by distances determined by nuclear physics, and buckling of the control rod guide tubes can distort the fuel rod spacer grids with consequent dearrangement of the fuel rod interspacing. A sudden loss of pressure in a pressurized-water reactor pressure vessel can result in the pressurized coolant in the vessel discharging from the vessel at such high velocity as to result in the abnormal thrust force on the end pieces of each fuel assembly, which could cause buckling of the control rod guide tubes when the end pieces are fixed to them in the normal rigid and unyielding manner

  4. ANNUAL GENERAL ASSEMBLY

    CERN Multimedia

    2001-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Auditorium on Wednesday 3 October 2001 at 14.30 hrs The Agenda comprises:   Opening Remarks (P. Levaux) Some aspects of risk in a pension fund (C. Cuénoud) Annual Report 2000: Presentation and results (C. Cuénoud) Copies of the Report are available from divisional secretariats. Results of the actuarial reviews (G. Maurin) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (P. Levaux) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2000 General Assembly are available from the Administration of the Fund (tel. + 41 22 767 91 94; e-mail Graziella.Praire@cern.ch) The English version will be published next week.

  5. Bottom head assembly

    International Nuclear Information System (INIS)

    Fife, A.B.

    1998-01-01

    A bottom head dome assembly is described which includes, in one embodiment, a bottom head dome and a liner configured to be positioned proximate the bottom head dome. The bottom head dome has a plurality of openings extending there through. The liner also has a plurality of openings extending there through, and each liner opening aligns with a respective bottom head dome opening. A seal is formed, such as by welding, between the liner and the bottom head dome to resist entry of water between the liner and the bottom head dome at the edge of the liner. In the one embodiment, a plurality of stub tubes are secured to the liner. Each stub tube has a bore extending there through, and each stub tube bore is coaxially aligned with a respective liner opening. A seat portion is formed by each liner opening for receiving a portion of the respective stub tube. The assembly also includes a plurality of support shims positioned between the bottom head dome and the liner for supporting the liner. In one embodiment, each support shim includes a support stub having a bore there through, and each support stub bore aligns with a respective bottom head dome opening. 2 figs

  6. ULTRASONIC ASSEMBLY [REVIEW

    Directory of Open Access Journals (Sweden)

    PORAV Viorica

    2015-05-01

    Full Text Available The paper exposes the possibility of machine producesers to optimize the costs of clothes assembling. Ultrasonic systems being frequently utilized have many advantages on semi products of synthetic textile and technical textile. First of all, sewing – cutting process can be accomplished under high speeds and rate of losses can be minimized. Cutting seal applications are frequently used for underwear and sportswear. Slicing and unit cutting machines, as well as portable sealing machines are available for labeling sector. Products such as bag, pocket and cover can be sewed in a seamless manner for promotion purposes. All objects in terms of accessories are obtained in same standard. Our quilting machines are preferred in worldwide due to its threadless, high quality sealing. An alternative to the classic sewing assembly, with thread and needles is ultrasonic seaming. In ultrasonic welding, there are no connective bolts, nails, soldering materials, or adhesives necessary to bind the materials together. Ultrasonic is defined as acoustic frequencies above the range audible to the human ear. Ultrasonic frequencies are administered to the fabric from the sonotrode of bonding machine. The high frequency and powerful energy produced, when is release in one special environment, the ultrasound heating this environment. The ability to ultrasonic weld textiles and films depend on their thermoplastic contents and the desired end results. The paper defines the weld ability of more common textiles and films. The welding refers to all types of bonding and sealing, as in point bonding of fabric, or continuous sealing of film.

  7. PWR fuel assembly

    International Nuclear Information System (INIS)

    Yamada, Yuji.

    1995-01-01

    A lower end plug is secured to a lower end of a thimble tube. A bolt-like thimble screw is screw-coupled and fastened to a female screw disposed to the end plug by way of a bushing screw-coupled to a lower nozzle. Then, the thimble screw and the lower nozzle are welded to secure the thimble tube and the lower nozzle. The lower portion of the bushing extends near the lower surface of the lower nozzle. The extended portion is provided with a recess to which a bolt head of the thimble screw is tightly inserted and a seating-face portion against which a seating-face of the bolt head abuts. Then, the extended portion of the bushing and the lower nozzle are spot-welded on the side of the lower surface of the nozzle, to prevent rotation of the bushing. This can easily prevent the rotation of the bushing after adjustment, to simplify the assembling of the fuel assembly. (I.N.)

  8. IMPROVED TOPOGRAPHIC MODELS VIA CONCURRENT AIRBORNE LIDAR AND DENSE IMAGE MATCHING

    Directory of Open Access Journals (Sweden)

    G. Mandlburger

    2017-09-01

    Full Text Available Modern airborne sensors integrate laser scanners and digital cameras for capturing topographic data at high spatial resolution. The capability of penetrating vegetation through small openings in the foliage and the high ranging precision in the cm range have made airborne LiDAR the prime terrain acquisition technique. In the recent years dense image matching evolved rapidly and outperforms laser scanning meanwhile in terms of the achievable spatial resolution of the derived surface models. In our contribution we analyze the inherent properties and review the typical processing chains of both acquisition techniques. In addition, we present potential synergies of jointly processing image and laser data with emphasis on sensor orientation and point cloud fusion for digital surface model derivation. Test data were concurrently acquired with the RIEGL LMS-Q1560 sensor over the city of Melk, Austria, in January 2016 and served as basis for testing innovative processing strategies. We demonstrate that (i systematic effects in the resulting scanned and matched 3D point clouds can be minimized based on a hybrid orientation procedure, (ii systematic differences of the individual point clouds are observable at penetrable, vegetated surfaces due to the different measurement principles, and (iii improved digital surface models can be derived combining the higher density of the matching point cloud and the higher reliability of LiDAR point clouds, especially in the narrow alleys and courtyards of the study site, a medieval city.

  9. Concurrent Use of Cigarettes and Smokeless Tobacco in Minnesota

    Directory of Open Access Journals (Sweden)

    Raymond G. Boyle

    2012-01-01

    Full Text Available Cigarette smokers are being encouraged to use smokeless tobacco (SLT in locations where smoking is banned. We examined state-wide data from Minnesota to measure changes over time in the use of SLT and concurrent use of cigarettes and SLT. The Minnesota Adult Tobacco Survey was conducted four times between 1999 and 2010 and has provided state-wide estimates of cigarette smoking, SLT use and concurrent use of SLT by smokers. The prevalence of SLT was essentially unchanged through 2007, then increased significantly between 2007 and 2010 (3.1% versus 4.3%, P<0.05. Similarly, the prevalence of cigarette smokers who reported using SLT was stable then increased between 2007 and 2010 (4.4% versus 9.6%, P<0.05. The finding of higher SLT use by smokers could indicate that smokers in Minnesota are in an experimental phase of testing alternative products as they adjust to recent public policies restricting smoking in public places. The findings are suggestive that some Minnesota smokers are switching to concurrent use of cigarettes and SLT. Future surveillance reports will be necessary to confirm the results.

  10. Iterative concurrent reconstruction algorithms for emission computed tomography

    International Nuclear Information System (INIS)

    Brown, J.K.; Hasegawa, B.H.; Lang, T.F.

    1994-01-01

    Direct reconstruction techniques, such as those based on filtered backprojection, are typically used for emission computed tomography (ECT), even though it has been argued that iterative reconstruction methods may produce better clinical images. The major disadvantage of iterative reconstruction algorithms, and a significant reason for their lack of clinical acceptance, is their computational burden. We outline a new class of ''concurrent'' iterative reconstruction techniques for ECT in which the reconstruction process is reorganized such that a significant fraction of the computational processing occurs concurrently with the acquisition of ECT projection data. These new algorithms use the 10-30 min required for acquisition of a typical SPECT scan to iteratively process the available projection data, significantly reducing the requirements for post-acquisition processing. These algorithms are tested on SPECT projection data from a Hoffman brain phantom acquired with a 2 x 10 5 counts in 64 views each having 64 projections. The SPECT images are reconstructed as 64 x 64 tomograms, starting with six angular views. Other angular views are added to the reconstruction process sequentially, in a manner that reflects their availability for a typical acquisition protocol. The results suggest that if T s of concurrent processing are used, the reconstruction processing time required after completion of the data acquisition can be reduced by at least 1/3 T s. (Author)

  11. Association between bacterial vaginosis and partner concurrency: a longitudinal study.

    Science.gov (United States)

    Kenyon, Chris R; Buyze, Jozefien; Klebanoff, Mark; Brotman, Rebecca M

    2018-02-01

    The study aimed to test if there was an association between prevalent bacterial vaginosis (BV) and women reporting that their partner had other partners at the same time (partner concurrency). This association has not been assessed in a longitudinal cohort. The Longitudinal Study of Vaginal Flora recruited a cohort of 3620 non-pregnant women aged 15-44 years who presented for routine primary healthcare at 12 clinics in Birmingham, Alabama. Behavioural questionnaires and vaginal smears were obtained quarterly for a year and BV was defined by a Nugent score 7 or higher as well as Amsel criteria. Mixed effects logistic regression was used to assess the relationship between prevalent BV and reporting that one's partner had other partners in the preceding 3-6 months time interval. Nugent score prevalent BV was associated with both reporting that one's partner definitely (adjusted OR (aOR) 1.5; 95% CI 1.2 to 1.8) and possibly (aOR 1.5; 95% CI 1.2 to 1.8) engaged in partner concurrency in the preceding 3-6 months time period. Prevalent BV diagnosed by Amsel criteria was similar. A diagnosis of prevalent BV was associated with reporting that one's partner possibly or definitely engaged in partner concurrency. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  12. Exploiting communication concurrency on high performance computing systems

    Energy Technology Data Exchange (ETDEWEB)

    Chaimov, Nicholas [Univ. of Oregon, Eugene, OR (United States); Ibrahim, Khaled Z. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Iancu, Costin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    Although logically available, applications may not exploit enough instantaneous communication concurrency to maximize hardware utilization on HPC systems. This is exacerbated in hybrid programming models such as SPMD+OpenMP. We present the design of a "multi-threaded" runtime able to transparently increase the instantaneous network concurrency and to provide near saturation bandwidth, independent of the application configuration and dynamic behavior. The runtime forwards communication requests from application level tasks to multiple communication servers. Our techniques alleviate the need for spatial and temporal application level message concurrency optimizations. Experimental results show improved message throughput and bandwidth by as much as 150% for 4KB bytes messages on InfiniBand and by as much as 120% for 4KB byte messages on Cray Aries. For more complex operations such as all-to-all collectives, we observe as much as 30% speedup. This translates into 23% speedup on 12,288 cores for a NAS FT implemented using FFTW. We also observe as much as 76% speedup on 1,500 cores for an already optimized UPC+OpenMP geometric multigrid application using hybrid parallelism.

  13. Concurrent chemoradiotherapy for advanced hypopharyngeal or cervical esophageal cancer

    International Nuclear Information System (INIS)

    Endo, Sohei; Hamada, Norihisa; Shigihara, Shuntaro

    2001-01-01

    Chemotherapy has been shown to be most effective when delivered concurrently with radiation for patients with untreated advanced-stage tumors. We conducted a concurrent chemoradiation protocol using systemic infusion of Cisplatin (CDDP) and 5-Fluorouracil (FU), followed by radical surgery. Thirty-six patients with advanced hypopharyngeal (n=28) or cervical esophageal cancer (n=8) received intravenous administration of CDDP (100 mg/m 2 ), followed by a 120-hour continuous infusion of 5-FU (1000 mg/m 2 /day), and concomitant radiotherapy (200 cGy/day x 20-35 fractions). One patient died of aspiration pneumonia. The rate of grade 3-4 hematological chemotoxicity was 27.8% (10/36). Pharyngo-laryngo-cervical esophagectomies were performed in 23 patients, one received partial resection of the hypopharynx, and one received radical neck dissection. Ten remaining patients refused radical surgery. In the resected specimens, 11 out of 24 (46%) were confirmed as complete response (CR). The median length of follow-up was 74.5 weeks. The projected 5-year survival was 39.7%. When the patients who had refused radical surgery for residual tumor were excluded, the 5-year survival rate rose up to 70.0% in the patients with hypopharyngeal cancer. Concurrent chemoradiotherapy can be safely and effectively applied. Preliminary pathological results indicate the possibility in improving the rate of organ preservation. (author)

  14. The Challenges of Career and Technical Education Concurrent Enrollment: An Administrative Perspective

    Science.gov (United States)

    Haag, Patricia W.

    2015-01-01

    Career and technical education concurrent enrollment may pose unique challenges in programming and enrollment for program administrators, and this chapter describes the experiences and challenges of a CTE concurrent enrollment administrator.

  15. Cumulative cisplatin dose in concurrent chemoradiotherapy for head and neck cancer : A systematic review

    NARCIS (Netherlands)

    Strojan, Primoz; Vermorken, Jan B.; Beitler, Jonathan J.; Saba, Nabil F.; Haigentz, Missak; Bossi, Paolo; Worden, Francis P.; Langendijk, Johannes A.; Eisbruch, Avraham; Mendenhall, William M.; Lee, Anne W. M.; Harrison, Louis B.; Bradford, Carol R.; Smee, Robert; Silver, Carl E.; Rinaldo, Alessandra; Ferlito, Alfio

    Background. The optimal cumulative dose and timing of cisplatin administration in various concurrent chemoradiotherapy protocols for nonmetastatic head and neck squamous cell carcinoma (HNSCC) has not been determined. Methods. The absolute survival benefit at 5 years of concurrent chemoradiotherapy

  16. Selecting Operations for Assembler Encoding

    Directory of Open Access Journals (Sweden)

    Tomasz Praczyk

    2010-04-01

    Full Text Available Assembler Encoding is a neuro-evolutionary method in which a neural network is represented in the form of a simple program called Assembler Encoding Program. The task of the program is to create the so-called Network Definition Matrix which maintains all the information necessary to construct the network. To generate Assembler Encoding Programs and the subsequent neural networks evolutionary techniques are used.
    The performance of Assembler Encoding strongly depends on operations used in Assembler Encoding Programs. To select the most effective operations, experiments in the optimization and the predator-prey problem were carried out. In the experiments, Assembler Encoding Programs equipped with different types of operations were tested. The results of the tests are presented at the end of the paper.

  17. Place field assembly distribution encodes preferred locations.

    Directory of Open Access Journals (Sweden)

    Omar Mamad

    2017-09-01

    Full Text Available The hippocampus is the main locus of episodic memory formation and the neurons there encode the spatial map of the environment. Hippocampal place cells represent location, but their role in the learning of preferential location remains unclear. The hippocampus may encode locations independently from the stimuli and events that are associated with these locations. We have discovered a unique population code for the experience-dependent value of the context. The degree of reward-driven navigation preference highly correlates with the spatial distribution of the place fields recorded in the CA1 region of the hippocampus. We show place field clustering towards rewarded locations. Optogenetic manipulation of the ventral tegmental area demonstrates that the experience-dependent place field assembly distribution is directed by tegmental dopaminergic activity. The ability of the place cells to remap parallels the acquisition of reward context. Our findings present key evidence that the hippocampal neurons are not merely mapping the static environment but also store the concurrent context reward value, enabling episodic memory for past experience to support future adaptive behavior.

  18. Gas separation membrane module assembly

    Science.gov (United States)

    Wynn, Nicholas P [Palo Alto, CA; Fulton, Donald A [Fairfield, CA

    2009-03-31

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  19. Integral nuclear fuel element assembly

    International Nuclear Information System (INIS)

    Schluderberg, D. C.

    1985-01-01

    An integral nuclear fuel element assembly utilizes longitudinally finned fuel pins. The continuous or interrupted fins of the fuel pins are brazed to fins of juxtaposed fuel pins or directly to the juxtaposed fuel pins or both. The integrally brazed fuel assembly is designed to satisfy the thermal and hydraulic requirements of a fuel assembly lattice having moderator to fuel atom ratios required to achieve high conversion and breeding ratios

  20. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Aoyama, Motoo; Koyama, Jun-ichi; Uchikawa, Sadao; Bessho, Yasunori; Nakajima, Akiyoshi; Maruyama, Hiromi; Ozawa, Michihiro; Nakamura, Mitsuya.

    1990-01-01

    The present invention concerns fuel assemblies charged in a BWR type reactor and the reactor core. The fuel assembly comprises fuel rods containing burnable poisons and fuel rods not containing burnable poisons. Both of the highest and the lowest gadolinia concentrations of the fuel rods containing gadolinia as burnable poisons are present in the lower region of the fuel assembly. This can increase the spectral shift effect without increasing the maximum linear power density. (I.N.)

  1. Rocket Assembly and Checkout Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Integrates, tests, and calibrates scientific instruments flown on sounding rocket payloads. The scientific instruments are assembled on an optical bench;...

  2. Assembly of the PLT device

    International Nuclear Information System (INIS)

    Marino, R.

    1975-11-01

    The assembly of the PLT device began in June 1974 with a preassembly of the mechanical structure at a remote site. The preassembly sequence incorporated final fabrication procedures with an initial staging operation. This successful staging/fabrication procedure proved to be an invaluable asset when the final assembly was started in August 1974. The assembly continued with the initial reassembly of the previously tested structural components at the final machine site. Construction was interrupted at several points to allow for toroidal field coil, vacuum vessel, and poloidal coil installation. Two phases of toroidal field coil power tests were included in the assembly sequence prior to, and just after the vacuum vessel insertion

  3. Next-generation transcriptome assembly

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Jeffrey A.; Wang, Zhong

    2011-09-01

    Transcriptomics studies often rely on partial reference transcriptomes that fail to capture the full catalog of transcripts and their variations. Recent advances in sequencing technologies and assembly algorithms have facilitated the reconstruction of the entire transcriptome by deep RNA sequencing (RNA-seq), even without a reference genome. However, transcriptome assembly from billions of RNA-seq reads, which are often very short, poses a significant informatics challenge. This Review summarizes the recent developments in transcriptome assembly approaches - reference-based, de novo and combined strategies-along with some perspectives on transcriptome assembly in the near future.

  4. Seismic behaviour of fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Song, Heuy Gap; Jhung, Myung Jo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-11-01

    A general approach for the dynamic time-history analysis of the reactor core is presented in this paper as a part of the fuel assembly qualification program. Several detailed core models are set up to reflect the placement of the fuel assemblies within the core shroud. Peak horizontal responses are obtained for each model for the motions induced from earthquake. The dynamic responses such as fuel assembly shear force, bending moment and displacement, and spacer grid impact loads are carefully investigated. Also, the sensitivity responses are obtained for the earthquake motions and the fuel assembly non-linear response characteristics are discussed. (Author) 9 refs., 24 figs., 1 tab.

  5. Airfoil nozzle and shroud assembly

    Science.gov (United States)

    Shaffer, J.E.; Norton, P.F.

    1997-06-03

    An airfoil and nozzle assembly are disclosed including an outer shroud having a plurality of vane members attached to an inner surface and having a cantilevered end. The assembly further includes a inner shroud being formed by a plurality of segments. Each of the segments having a first end and a second end and having a recess positioned in each of the ends. The cantilevered end of the vane member being positioned in the recess. The airfoil and nozzle assembly being made from a material having a lower rate of thermal expansion than that of the components to which the airfoil and nozzle assembly is attached. 5 figs.

  6. 7 CFR 1610.6 - Concurrent Bank and RUS cost-of-money loans.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Concurrent Bank and RUS cost-of-money loans. 1610.6..., DEPARTMENT OF AGRICULTURE LOAN POLICIES § 1610.6 Concurrent Bank and RUS cost-of-money loans. (a) The Bank makes loans, under section 408 of the Act, concurrently with RUS cost-of-money loans made under section...

  7. An Implementation of the Object-Oriented Concurrent Programming Language SINA

    NARCIS (Netherlands)

    Triphathi, Anand; Berge, Eric; Aksit, Mehmet

    SINA is an object-oriented language for distributed and concurrent programming. The primary focus of this paper is on the object-oriented concurrent programming mechanisms of SINA and their implementation. This paper presents the SINA constructs for concurrent programming and inter-object

  8. Automated optical assembly

    Science.gov (United States)

    Bala, John L.

    1995-08-01

    Automation and polymer science represent fundamental new technologies which can be directed toward realizing the goal of establishing a domestic, world-class, commercial optics business. Use of innovative optical designs using precision polymer optics will enable the US to play a vital role in the next generation of commercial optical products. The increased cost savings inherent in the utilization of optical-grade polymers outweighs almost every advantage of using glass for high volume situations. Optical designers must gain experience with combined refractive/diffractive designs and broaden their knowledge base regarding polymer technology beyond a cursory intellectual exercise. Implementation of a fully automated assembly system, combined with utilization of polymer optics, constitutes the type of integrated manufacturing process which will enable the US to successfully compete with the low-cost labor employed in the Far East, as well as to produce an equivalent product.

  9. Fuel sub-assembly

    International Nuclear Information System (INIS)

    Jolly, R.

    1988-01-01

    A nuclear fuel sub-assembly includes a hexagonal bundle of parallel, spaced apart fuel pins coupled at one end to an end-holding grid comprising a number of transverse spaced apart rails to each of which is connected a series of pin-receiving cells which render the pins axially captive with the rails. The series of cells are defined by a pair of metal strips each of which has a series of pocket formations such that when the pocket formations are in registry they define cylindrical shaped cells provided with internal projections which engage annular recesses in the end caps of the fuel pins to effect axial constraint of the pins. (author)

  10. Ultrasonic calibration assembly

    International Nuclear Information System (INIS)

    1981-01-01

    Ultrasonic transducers for in-service inspection of nuclear reactor vessels have several problems associated with them which this invention seeks to overcome. The first is that of calibration or referencing a zero start point for the vertical axis of transducer movement to locate a weld defect. The second is that of verifying the positioning (vertically or at a predetermined angle). Thirdly there is the problem of ascertaining the speed per unit distance in the operating medium of the transducer beam prior to the actual inspection. The apparatus described is a calibration assembly which includes a fixed, generally spherical body having a surface for reflecting an ultrasonic beam from one of the transducers which can be moved until the reflection from the spherical body is the highest amplitude return signal indicating radial alignment from the body. (U.K.)

  11. Rotatable seal assembly

    International Nuclear Information System (INIS)

    Garibaldi, J.L.; Logan, C.M.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an oring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers

  12. Reactor fuel assembly fastening

    International Nuclear Information System (INIS)

    Formanek, F.J.; Schukei, G.E.

    1980-01-01

    A nuclear fuel assembly is described, adapted to be locked into first mating surfaces on a core support stand, comprising a lower end fitting having posts for resting on the stand; elongated hook members pivotally connected at one end to the lower end fitting and having a second mating surface at the other end to engage the first mating surfaces; actuating means located between the posts on the lower end fitting and being vertically movable relative to the end fitting; and rigid links pivotally attached at one end to the hook members intermediate the connection of the hook members to the end fitting and the second mating surface and pivotally attached at the other end to the actuating means, the link having a length between the pivoted connections such that the second mating surface on the hook members locks into engagement with the first mating surfaces on the stand as the links approach the horizontal. (author)

  13. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Borrman, B.; Nylund, O.

    1984-01-01

    A fuel assembly with a fuel channel which surrounds a plurality of fuel rods and which is divided, by means of a stiffening device of cruciform cross-section and four wings, into four sub-channels each of which comprises a bundle of fuel rods. Each fuel channel side has a plurality of stamped, inwardly-directed projections, arranged vertically one after the other, aid projections being welded to one and the same stiffening wing. Each one of the wall portions located between the projections defines, together with two adjacently positioned projections and a portion of the stiffening wing, a communiation opening between two bundles located on on one side each of the stiffening wing. (Author)

  14. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Wakamatsu, Mitsuo.

    1974-01-01

    Object: To improve a circulating flow passage of coolant so as to be able to accurately detect the temperature of coolant, rare gases contained, and the like. Structure: A fuel assembly comprising a flow regulating lattice provided with a plurality of communication holes in an axial direction, said lattice being positioned at the upper end of an outer tube in which nuclear fuel elements are received, and a neutron shielding body having a plurality of spiral coolant flow passages disposed between the lattice and the nuclear fuel elements, whereby a coolant comprised of liquid sodium or the like, which moves up passing through the coolant flow passages and the flow regulating passage, is regulated and passed through a detector mounted at the upper part of the flow regulating lattice to detect coolant temperature, flow rate, and rare gases or the like as the origin of nuclear fission contained in the coolant due to breakage of fuel elements. (Kamimura, M.)

  15. Nuclear reactor assembly

    International Nuclear Information System (INIS)

    Dorner, H.; Scholz, M.; Jungmann, A.

    1975-01-01

    A nuclear reactor assembly includes a reactor pressure tank having a substantially cylindrical side wall surrounded by the wall of a cylindrical cavity formed by a biological shield. A rotative cylindrical wall is interposed between the walls and has means for rotating it from outside of the shield, and a probe is carried by the rotative wall for monitoring the pressure tank's wall. The probe is vertically movable relative to the rotative cylindrical wall, so that by the probe's vertical movement and rotation of the rotative cylinder, the reactor's wall can be very extensively monitored. If the reactor pressure tank's wall fails, it is contained by the rotative wall which is backed-up by the shield cavity wall. (Official Gazette)

  16. Subcritical nuclear assembly

    International Nuclear Information System (INIS)

    Vega C, H. R.

    2014-08-01

    A Subcritical Nuclear Assembly is a device where the nuclear-fission chain reaction is initiated and maintained using an external neutron source. It is a valuable educational and research tool where in a safe way many reactor parameters can be measured. Here, we have used the Wigner-Seitz method in the six-factor formula to calculate the effective multiplication factor of a subcritical nuclear reactor Nuclear Chicago model 9000. This reactor has approximately 2500 kg of natural uranium heterogeneously distributed in slugs. The reactor uses a 239 PuBe neutron source that is located in the center of an hexagonal array. Using Monte Carlo methods, with the MCNP5 code, a three-dimensional model of the subcritical reactor was designed to estimate the effective multiplication factor, the neutron spectra, the total and thermal neutron fluences along the radial and axial axis. With the neutron spectra in two locations outside the reactor the ambient dose equivalent were estimated. (Author)

  17. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Domoto, Noboru; Masuda, Hiroyuki

    1989-01-01

    In a nuclear fuel assembly loaded with a plurality of fuel rods, the inside of a fuel rod disposed at a high neutron flux region is divided into an inner region and an outer region, and more burnable poisons are mixed in the inner region than in the outer region. Alternatively, the central portion of a pellet disposed in a high neutron flux region is made hollow, in which burnable poisons are charged. This can prevent neutron infinite multiplication factor from decreasing extremely at the initial burning stage. Further, the burnable poisons are not rapidly burnt completely and local peaking coefficient can be controlled. Accordingly, in a case of suppressing a predetermined excess reactivity by using a fuel rod incorporated with the burnable poison, the fuel economy can be improved more and the reactor core controllability can also be improved as compared with the usual case. (T.M.)

  18. Reconfigurable assembly work station

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yhu-Tin; Abell, Jeffrey A.; Spicer, John Patrick

    2017-11-14

    A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table through the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.

  19. Multivalent protein assembly using monovalent self-assembling building blocks

    NARCIS (Netherlands)

    Petkau - Milroy, K.; Sonntag, M.H.; Colditz, A.; Brunsveld, L.

    2013-01-01

    Discotic molecules, which self-assemble in water into columnar supramolecular polymers, emerged as an alternative platform for the organization of proteins. Here, a monovalent discotic decorated with one single biotin was synthesized to study the self-assembling multivalency of this system in regard

  20. Method and apparatus for assembling a permanent magnet pole assembly

    Science.gov (United States)

    Carl, Jr., Ralph James; Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee [Scotia, NY; Dawson, Richard Nils [Voorheesville, NY; Qu, Ronghai [Clifton Park, NY; Avanesov, Mikhail Avramovich [Moscow, RU

    2009-08-11

    A pole assembly for a rotor, the pole assembly includes a permanent magnet pole including at least one permanent magnet block, a plurality of laminations including a pole cap mechanically coupled to the pole, and a plurality of laminations including a base plate mechanically coupled to the pole.

  1. Self-assembly of self-assembled molecular triangles

    Indian Academy of Sciences (India)

    While the solution state structure of 1 can be best described as a trinuclear complex, in the solidstate well-fashioned intermolecular - and CH- interactions are observed. Thus, in the solid-state further self-assembly of already self-assembled molecular triangle is witnessed. The triangular panels are arranged in a linear ...

  2. Rail-Guided Multi-Robot System for 3D Cellular Hydrogel Assembly with Coordinated Nanomanipulation

    Directory of Open Access Journals (Sweden)

    Huaping Wang

    2014-08-01

    Full Text Available The 3D assembly of micro-/nano-building blocks with multi-nanomanipulator coordinated manipulation is one of the central elements of nanomanipulation. A novel rail-guided nanomanipulation system was proposed for the assembly of a cellular vascular-like hydrogel microchannel. The system was equipped with three nanomanipulators and was restricted on the rail in order to realize the arbitrary change of the end-effectors during the assembly. It was set up with hybrid motors to achieve both a large operating space and a 30 nm positional resolution. The 2D components such as the assembly units were fabricated through the encapsulation of cells in the hydrogel. The coordinated manipulation strategies among the multi-nanomanipulators were designed with vision feedback and were demonstrated through the bottom-up assembly of the vascular-like microtube. As a result, the multi-layered microchannel was assembled through the cooperation of the nanomanipulation system.

  3. ANL high resolution injector

    International Nuclear Information System (INIS)

    Minehara, E.; Kutschera, W.; Hartog, P.D.; Billquist, P.

    1985-01-01

    The ANL (Argonne National Laboratory) high-resolution injector has been installed to obtain higher mass resolution and higher preacceleration, and to utilize effectively the full mass range of ATLAS (Argonne Tandem Linac Accelerator System). Preliminary results of the first beam test are reported briefly. The design and performance, in particular a high-mass-resolution magnet with aberration compensation, are discussed. 7 refs., 5 figs., 2 tabs

  4. Adaptive resolution simulation of an atomistic DNA molecule in MARTINI salt solution

    NARCIS (Netherlands)

    Zavadlav, J.; Podgornik, R.; Melo, M.n.; Marrink, S.j.; Praprotnik, M.

    2016-01-01

    We present a dual-resolution model of a deoxyribonucleic acid (DNA) molecule in a bathing solution, where we concurrently couple atomistic bundled water and ions with the coarse-grained MAR- TINI model of the solvent. We use our fine-grained salt solution model as a solvent in the inner shell

  5. Architecture and assembly of the Bacillus subtilis spore coat.

    Science.gov (United States)

    Plomp, Marco; Carroll, Alicia Monroe; Setlow, Peter; Malkin, Alexander J

    2014-01-01

    Bacillus spores are encased in a multilayer, proteinaceous self-assembled coat structure that assists in protecting the bacterial genome from stresses and consists of at least 70 proteins. The elucidation of Bacillus spore coat assembly, architecture, and function is critical to determining mechanisms of spore pathogenesis, environmental resistance, immune response, and physicochemical properties. Recently, genetic, biochemical and microscopy methods have provided new insight into spore coat architecture, assembly, structure and function. However, detailed spore coat architecture and assembly, comprehensive understanding of the proteomic composition of coat layers, and specific roles of coat proteins in coat assembly and their precise localization within the coat remain in question. In this study, atomic force microscopy was used to probe the coat structure of Bacillus subtilis wild type and cotA, cotB, safA, cotH, cotO, cotE, gerE, and cotE gerE spores. This approach provided high-resolution visualization of the various spore coat structures, new insight into the function of specific coat proteins, and enabled the development of a detailed model of spore coat architecture. This model is consistent with a recently reported four-layer coat assembly and further adds several coat layers not reported previously. The coat is organized starting from the outside into an outermost amorphous (crust) layer, a rodlet layer, a honeycomb layer, a fibrous layer, a layer of "nanodot" particles, a multilayer assembly, and finally the undercoat/basement layer. We propose that the assembly of the previously unreported fibrous layer, which we link to the darkly stained outer coat seen by electron microscopy, and the nanodot layer are cotH- and cotE- dependent and cotE-specific respectively. We further propose that the inner coat multilayer structure is crystalline with its apparent two-dimensional (2D) nuclei being the first example of a non-mineral 2D nucleation crystallization

  6. Architecture and Assembly of the Bacillus subtilis Spore Coat

    Science.gov (United States)

    Plomp, Marco; Carroll, Alicia Monroe; Setlow, Peter; Malkin, Alexander J.

    2014-01-01

    Bacillus spores are encased in a multilayer, proteinaceous self-assembled coat structure that assists in protecting the bacterial genome from stresses and consists of at least 70 proteins. The elucidation of Bacillus spore coat assembly, architecture, and function is critical to determining mechanisms of spore pathogenesis, environmental resistance, immune response, and physicochemical properties. Recently, genetic, biochemical and microscopy methods have provided new insight into spore coat architecture, assembly, structure and function. However, detailed spore coat architecture and assembly, comprehensive understanding of the proteomic composition of coat layers, and specific roles of coat proteins in coat assembly and their precise localization within the coat remain in question. In this study, atomic force microscopy was used to probe the coat structure of Bacillus subtilis wild type and cotA, cotB, safA, cotH, cotO, cotE, gerE, and cotE gerE spores. This approach provided high-resolution visualization of the various spore coat structures, new insight into the function of specific coat proteins, and enabled the development of a detailed model of spore coat architecture. This model is consistent with a recently reported four-layer coat assembly and further adds several coat layers not reported previously. The coat is organized starting from the outside into an outermost amorphous (crust) layer, a rodlet layer, a honeycomb layer, a fibrous layer, a layer of “nanodot” particles, a multilayer assembly, and finally the undercoat/basement layer. We propose that the assembly of the previously unreported fibrous layer, which we link to the darkly stained outer coat seen by electron microscopy, and the nanodot layer are cotH- and cotE- dependent and cotE-specific respectively. We further propose that the inner coat multilayer structure is crystalline with its apparent two-dimensional (2D) nuclei being the first example of a non-mineral 2D nucleation crystallization

  7. Moisture Research - Optimizing Wall Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Arena, L.; Mantha, P.

    2013-05-01

    The Consortium for Advanced Residential Buildings (CARB) evaluated several different configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies. WUFI and THERM were used to model the hygrothermal and heat transfer characteristics of these walls.

  8. Fuel cell sub-assembly

    Science.gov (United States)

    Chi, Chang V.

    1983-01-01

    A fuel cell sub-assembly comprising a plurality of fuel cells, a first section of a cooling means disposed at an end of the assembly and means for connecting the fuel cells and first section together to form a unitary structure.

  9. Newnes electronics assembly pocket book

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Produced in association with the Engineering Training Authority with contributions from dozens of people in the electronics industry. The material covers common skills in electrical and electronic engineering and concentrates mainly on wiring and assembly. 'Newnes Electronics Assembly Pocket Book' is for electronics technicians, students and apprentices.

  10. Design for improved maintenance of the fiber-optic cable system (As carried out in a concurrent engineering environment)

    Science.gov (United States)

    Tremoulet, P. C.

    The author describes a number of maintenance improvements in the Fiber Optic Cable System (FOCS). They were achieved during a production phase pilot concurrent engineering program. Listed in order of importance (saved maintenance time and material) by maintenance level, they are: (1) organizational level: improved fiber optic converter (FOC) BITE; (2) Intermediate level: reduced FOC adjustments from 20 to 2; partitioned FOC into electrical and optical parts; developed cost-effective fault isolation test points and test using standard test equipment; improved FOC chassis to have lower mean time to repair; and (3) depot level: revised test requirements documents (TRDs) for common automatic test equipment and incorporated ATE testability into circuit and assemblies and application-specific integrated circuits. These improvements met this contract's tailored logistics MIL-STD 1388-1A requirements of monitoring the design for supportability and determining the most effective support equipment. Important logistics lessons learned while accomplishing these maintainability and supportability improvements on the pilot concurrent engineering program are also discussed.

  11. Concurrence Measurement for the Two-Qubit Optical and Atomic States

    Directory of Open Access Journals (Sweden)

    Lan Zhou

    2015-06-01

    Full Text Available Concurrence provides us an effective approach to quantify entanglement, which is quite important in quantum information processing applications. In the paper, we mainly review some direct concurrence measurement protocols of the two-qubit optical or atomic system. We first introduce the concept of concurrence for a two-qubit system. Second, we explain the approaches of the concurrence measurement in both a linear and a nonlinear optical system. Third, we introduce some protocols for measuring the concurrence of the atomic entanglement system.

  12. Quantitative measurement of hypertrophic scar: interrater reliability and concurrent validity.

    Science.gov (United States)

    Nedelec, Bernadette; Correa, José A; Rachelska, Grazyna; Armour, Alexis; LaSalle, Léo

    2008-01-01

    Research into the pathophysiology and treatment of hypertrophic scar (HSc) remains limited by the heterogeneity of scar and the imprecision with which its severity is measured. The objective of this study was to test the interrater reliability and concurrent validity of the Cutometer measurement of elasticity, the Mexameter measurement of erythema and pigmentation, and total thickness measure of the DermaScan C relative to the modified Vancouver Scar Scale (mVSS) in patient-matched normal skin, normal scar, and HSc. Three independent investigators evaluated 128 sites (severe HSc, moderate or mild HSc, donor site, and normal skin) on 32 burn survivors using all of the above measurement tools. The intraclass correlation coefficient, which was used to measure interrater reliability, reflects the inherent amount of error in the measure and is considered acceptable when it is >0.75. Interrater reliability of the totals of the height, pliability, and vascularity subscales of the mVSS fell below the acceptable limit ( congruent with0.50). The individual subscales of the mVSS fell well below the acceptable level (0.89) for each study site with the exception of severe scar. Mexameter and DermaScan C reliability measurements were acceptable for all sites (>0.82). Concurrent validity correlations with the mVSS were significant except for the comparison of the mVSS pliability subscale and the Cutometer maximum deformation measure comparison in severe scar. In conclusion, the Mexameter and DermaScan C measurements of scar color and thickness of all sites, as well as the Cutometer measurement of elasticity in all but the most severe scars shows high interrater reliability. Their significant concurrent validity with the mVSS confirms that these tools are measuring the same traits as the mVSS, and in a more objective way.

  13. Knowledge Management tools integration within DLR's concurrent engineering facility

    Science.gov (United States)

    Lopez, R. P.; Soragavi, G.; Deshmukh, M.; Ludtke, D.

    The complexity of space endeavors has increased the need for Knowledge Management (KM) tools. The concept of KM involves not only the electronic storage of knowledge, but also the process of making this knowledge available, reusable and traceable. Establishing a KM concept within the Concurrent Engineering Facility (CEF) has been a research topic of the German Aerospace Centre (DLR). This paper presents the current KM tools of the CEF: the Software Platform for Organizing and Capturing Knowledge (S.P.O.C.K.), the data model Virtual Satellite (VirSat), and the Simulation Model Library (SimMoLib), and how their usage improved the Concurrent Engineering (CE) process. This paper also exposes the lessons learned from the introduction of KM practices into the CEF and elaborates a roadmap for the further development of KM in CE activities at DLR. The results of the application of the Knowledge Management tools have shown the potential of merging the three software platforms with their functionalities, as the next step towards the fully integration of KM practices into the CE process. VirSat will stay as the main software platform used within a CE study, and S.P.O.C.K. and SimMoLib will be integrated into VirSat. These tools will support the data model as a reference and documentation source, and as an access to simulation and calculation models. The use of KM tools in the CEF aims to become a basic practice during the CE process. The settlement of this practice will result in a much more extended knowledge and experience exchange within the Concurrent Engineering environment and, consequently, the outcome of the studies will comprise higher quality in the design of space systems.

  14. WE-D-BRE-04: Modeling Optimal Concurrent Chemotherapy Schedules

    International Nuclear Information System (INIS)

    Jeong, J; Deasy, J O

    2014-01-01

    Purpose: Concurrent chemo-radiation therapy (CCRT) has become a more common cancer treatment option with a better tumor control rate for several tumor sites, including head and neck and lung cancer. In this work, possible optimal chemotherapy schedules were investigated by implementing chemotherapy cell-kill into a tumor response model of RT. Methods: The chemotherapy effect has been added into a published model (Jeong et al., PMB (2013) 58:4897), in which the tumor response to RT can be simulated with the effects of hypoxia and proliferation. Based on the two-compartment pharmacokinetic model, the temporal concentration of chemotherapy agent was estimated. Log cell-kill was assumed and the cell-kill constant was estimated from the observed increase in local control due to concurrent chemotherapy. For a simplified two cycle CCRT regime, several different starting times and intervals were simulated with conventional RT regime (2Gy/fx, 5fx/wk). The effectiveness of CCRT was evaluated in terms of reduction in radiation dose required for 50% of control to find the optimal chemotherapy schedule. Results: Assuming the typical slope of dose response curve (γ50=2), the observed 10% increase in local control rate was evaluated to be equivalent to an extra RT dose of about 4 Gy, from which the cell-kill rate of chemotherapy was derived to be about 0.35. Best response was obtained when chemotherapy was started at about 3 weeks after RT began. As the interval between two cycles decreases, the efficacy of chemotherapy increases with broader range of optimal starting times. Conclusion: The effect of chemotherapy has been implemented into the resource-conservation tumor response model to investigate CCRT. The results suggest that the concurrent chemotherapy might be more effective when delayed for about 3 weeks, due to lower tumor burden and a larger fraction of proliferating cells after reoxygenation

  15. Advanced gray rod control assembly

    Science.gov (United States)

    Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

    2013-09-17

    An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

  16. Method of transporting fuel assemblies

    International Nuclear Information System (INIS)

    Okada, Katsutoshi.

    1979-01-01

    Purpose: To enable safety transportation of fuel assemblies for FBR type reactors by surrounding each of fuel elements in a wrapper tube by a rubbery, hollow cylindrical container and by sealing medium such as air to the inside of the container. Method: A fuel element is contained in a hollow cylindrical rubber-like tube. The fuel element has an upper end plug, a lower end plug and a wire spirally wound around the outer periphery. Upon transportation of the fuel assemblies, each of the fuel elements is covered with the container and arranged in the wrapper tube and then the fuel assemblies are assembled. Then, medium such as air is sealed for each of the fuel elements by way of an opening and then the opening is tightly closed. Before loading the transported fuel assemblies in the reactor, the medium is discharged through the opening and the container is completely extracted and removed from the inside of the wrapper tube. (Seki, T.)

  17. Case-based Reasoning in Conflict Negotiation in Concurrent Engineering

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Case-based reasoning (CBR) is a kind of analogous reasoning that is widely used in artificial intelligence. Conflicts are pervasive in Concurrent Engineering design environment. Conflict negotiation is necessary when conflicts occur. It is difficult to resolve conflicts due to several reasons. An approach to resolving conflicts by case-based reasoning is proposed in this paper. The knowledge representation of conflict negotiation cases, the judgment of case similarity, the retrieval model of cases, the management of case bases, and the process of case-based conflict negotiation are studied. The implementation structure of the Case-based Conflict Solving System (CCSS) is also given.

  18. Process support for Opticam: a concurrent engineering approach

    Science.gov (United States)

    Czajkowski, Walter C.; Tipps, Joe D., Jr.

    1992-12-01

    Although the principles of concurrent engineering and rapid product cycles are not new concepts in the industrial sector, the optics manufacturing industry has witnessed few technological advances since the 1940's. At present the optics industry maintains outdated stand-alone manufacturing equipment and systems that do little to foster integration or communications. 'Islands of Technology', spawned from the latest offerings of CNC controlled equipment, are generally stand alone systems incapable of supporting communication with other process equipment, not to mention the total business enterprise. This approach increases the cost in design and manufacture of optical systems while negatively impacting competitiveness in the global marketplace.

  19. Concurrent and Distributed Applications with ActoDeS

    Directory of Open Access Journals (Sweden)

    Bergenti Federico

    2016-01-01

    Full Text Available ActoDeS is a software framework for the development of large concurrent and distributed systems. This software framework takes advantage of the actor model and of an its implementation that makes easy the development of the actor code by delegating the management of events (i.e., the reception of messages to the execution environment. Moreover, it allows the development of scalable and efficient applications through the possibility of using different implementations of the components that drive the execution of actors. In particular, the paper introduces the software framework and presents the results of its experimentation.

  20. On the Expressive Power of Temporal Concurrent Constraint Programming Languages

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Palamidessi, Catuscia; Valencia, Frank D.

    2002-01-01

    The tcc paradigm is a formalism for timed concurrent constraint programming. Several tcc languages differing in their way of expressing infinite behavior have been proposed in the literature. In this paper we study the expressive power of some of these languages. In particular, we show that: (1......) recursive procedures with parameters can be encoded into parameterless recursive procedures with dynamic scoping, and viceversa. (2) replication can be encoded into parameterless recursive procedures with static scoping, and viceversa. (3) the languages from (1) are strictly more expressive than...

  1. Concurrent design of an RTP chamber and advanced control system

    Energy Technology Data Exchange (ETDEWEB)

    Spence, P. [Sandia National Labs., Livermore, CA (United States); Schaper, C. [Microelectronics Control and Sensing, Inc., Mountain View, CA (United States); Kermani, A. [CVC Products, Inc., Fremont, CA (United States)

    1995-12-31

    A concurrent-engineering approach is applied to the development of an axisymmetric rapid-thermal-processing (RTP) reactor and its associated temperature controller. Using a detailed finite-element thermal model as a surrogate for actual hardware, the authors have developed and tested a multi-input multi-output (MIMO) controller. Closed-loop simulations are performed by linking the control algorithm with the finite-element code. Simulations show that good temperature uniformity is maintained on the wafer during both steady and transient conditions. A numerical study shows the effect of ramp rate, feedback gain, sensor placement, and wafer-emissivity patterns on system performance.

  2. Multiprocessor system with multiple concurrent modes of execution

    Science.gov (United States)

    Ahn, Daniel; Ceze, Luis H; Chen, Dong; Gara, Alan; Heidelberger, Philip; Ohmacht, Martin

    2013-12-31

    A multiprocessor system supports multiple concurrent modes of speculative execution. Speculation identification numbers (IDs) are allocated to speculative threads from a pool of available numbers. The pool is divided into domains, with each domain being assigned to a mode of speculation. Modes of speculation include TM, TLS, and rollback. Allocation of the IDs is carried out with respect to a central state table and using hardware pointers. The IDs are used for writing different versions of speculative results in different ways of a set in a cache memory.

  3. Concurrent tubercular and staphylococcus meningitis in a child

    Institute of Scientific and Technical Information of China (English)

    Amit Agrawal

    2009-01-01

    Spontaneous,non-surgical haematogenous Staphylococcus aureus meningitis is rare and associated with high mortality.Mixed infection causing meningitis (pyogenic and tubercular)is further rarer,poses a difficult diag-nostic and management challenge,which warrants early diagnosis and aggressive therapy.We present a case of concurrent pyogenic and tubercular meningitis in a child managed successfully.It seems that in present case initial pyogenic infection resulted in the immunocompromised state for the child that would had lead to the acti-vation of tubercular foci resulting in tubercular meningitis.

  4. Improving Construction Process through Integration and Concurrent Engineering

    Directory of Open Access Journals (Sweden)

    Malik Khalfan

    2012-11-01

    Full Text Available In an increasingly competitive business environment, improvedtime-to-market, reduced production cost, quality of the productand customer involvement are rapidly becoming the key successfactors for any product development process. Consequently, mostorganisations are moving towards the adoption of latest technologyand new management concepts and philosophies such as totalquality management and concurrent engineering (CE to bringimprovement in their product development process. This paperdiscusses the adoption of integrated processes and CE withinthe construction industry to enable construction organisations toimprove their project development process. It also discusses aproposed integrated database model for the construction projects,which should enable the construction process to improve, becomemore effective and more efficient.

  5. Type and Behaviour Reconstruction for Higher-Order Concurrent Programs

    DEFF Research Database (Denmark)

    Amtoft, T.; Nielson, Flemming; Nielson, Hanne Riis

    1997-01-01

    The authors develop a sound and complete type and behaviour inference algorithm for a fragment of CML (Standard ML with primitives for concurrency). Behaviours resemble terms of a process algebra and yield a concise representation of the communications taking place during execution; types...... are mostly as usual except that function types and `delayed communication types' are labelled by behaviours expressing the communications that will take place if the function is applied or the delayed action is activated. The development of the paper improves a previously published algorithm in achieving...

  6. An Introduction to Parallelism, Concurrency and Acceleration (1/2)

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Concurrency and parallelism are firm elements of any modern computing infrastructure, made even more prominent by the emergence of accelerators. These lectures offer an introduction to these important concepts. We will begin with a brief refresher of recent hardware offerings to modern-day programmers. We will then open the main discussion with an overview of the laws and practical aspects of scalability. Key parallelism data structures, patterns and algorithms will be shown. The main threats to scalability and mitigation strategies will be discussed in the context of real-life optimization problems.

  7. Medium Access Control for Opportunistic Concurrent Transmissions under Shadowing Channels

    Directory of Open Access Journals (Sweden)

    Seung Min Hur

    2009-06-01

    Full Text Available We study the problem of how to alleviate the exposed terminal effect in multihop wireless networks in the presence of log-normal shadowing channels. Assuming node location information, we propose an extension of the IEEE 802.11 MAC protocol that schedules concurrent transmissions in the presence of log-normal shadowing, thus mitigating the exposed terminal problem and improving network throughput and delay performance. We observe considerable improvements in throughput and delay achieved over the IEEE 802.11 MAC under various network topologies and channel conditions in ns-2 simulations, which justify the importance of considering channel randomness in MAC protocol design for multihop wireless networks.

  8. High resolution IVEM tomography of biological specimens

    Energy Technology Data Exchange (ETDEWEB)

    Sedat, J.W.; Agard, D.A. [Univ. of California, San Francisco, CA (United States)

    1997-02-01

    Electron tomography is a powerful tool for elucidating the three-dimensional architecture of large biological complexes and subcellular organelles. The introduction of intermediate voltage electron microscopes further extended the technique by providing the means to examine very large and non-symmetrical subcellular organelles, at resolutions beyond what would be possible using light microscopy. Recent studies using electron tomography on a variety of cellular organelles and assemblies such as centrosomes, kinetochores, and chromatin have clearly demonstrated the power of this technique for obtaining 3D structural information on non-symmetric cell components. When combined with biochemical and molecular observations, these 3D reconstructions have provided significant new insights into biological function.

  9. Automated conflict resolution issues

    Science.gov (United States)

    Wike, Jeffrey S.

    1991-01-01

    A discussion is presented of how conflicts for Space Network resources should be resolved in the ATDRSS era. The following topics are presented: a description of how resource conflicts are currently resolved; a description of issues associated with automated conflict resolution; present conflict resolution strategies; and topics for further discussion.

  10. ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Gorpani, B.

    2000-01-01

    The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and dry handling areas are controlled by the control and tracking system. The system operating sequence begins with moving transportation casks to the cask preparation area. The cask preparation operations consist of cask cavity gas sampling, cask venting, cask cool-down, outer lid removal, and inner shield plug lifting fixture attachment. Casks containing bare SNF (no DPC) are filled with water and placed in the cask unloading pool. The inner shield plugs are removed underwater. For casks containing a DPC, the cask lid(s) is removed, and the DPC is penetrated, sampled, vented, and cooled. A DPC lifting fixture is attached and the cask is placed

  11. Nuclear fuel assemblies and fuel pins usable in such assemblies

    International Nuclear Information System (INIS)

    Jolly, R.

    1982-01-01

    A novel end cap for a nuclear fuel assembly is described in detail. It consists of a trisection arrangement which is received within a cell of a cellular grid. The cell contains abutment means with which the trisection comes into abutment. The grid also contains an abutment means for preventing the trisections from being inserted into the cell in an incorrect orientation. The present design allows fuel pins to be securely held in a hold-down grid of a sub-assembly. The design also allows easier dis-assembly of the swollen and embrittled fuel pins prior to reprocessing. (U.K.)

  12. Single electron counting using a dual MCP assembly

    International Nuclear Information System (INIS)

    Yang, Yuzhen; Liu, Shulin; Zhao, Tianchi; Yan, Baojun; Wang, Peiliang; Yu, Yang; Lei, Xiangcui; Yang, Luping; Wen, Kaile; Qi, Ming

    2016-01-01

    The gain, pulse height resolution and peak-to-valley ratio of single electrons detected by using a Chevron configured Microchannel Plate (MCP) assembly are studied. The two MCPs are separated by a 280 µm gap and are biased by four electrodes. The purpose of the study is to determine the optimum bias voltage arrangements for single electron counting. By comparing the results of various bias voltage combinations, we conclude that good performance for the electron counting can be achieved by operating the MCP assembly in saturation mode. In addition, by applying a small reverse bias voltage across the gap while adjusting the bias voltages of the MCPs, optimum performance of electron counting can be obtained. - Highlights: • Dual MCPs assembly with four electrodes using different voltage combinations has been investigated for single electron counting. • Both the MCP voltages and the gap voltage can affect the gain, pulse height resolution and P/V ratio. • A high gain of the first stage MCP, a saturation mode of the second stage MCP and an appropriately reverse gap voltage can improve the resolution greatly. • The optimum voltage arrangements is significant for the design of MCP detectors in single electron counting applications.

  13. ITER assembly and maintenance

    International Nuclear Information System (INIS)

    Honda, T.; Davis, F.; Lousteau, D.

    1991-01-01

    This document is intended to describe the work conducted by the ITER Assembly and Maintenance (A and M) Design Unit and the supporting home teams during the ITER Conceptual Design Activities, carried out from 1988 through 1990. Its content consists of two main sections, i.e., Chapter III, which describes the identified tasks to be performed by the A and M system and a general description of the required equipment; and Chapter IV, which provides a more detailed description of the equipment proposed to perform the assigned tasks. A two-stage R and D program is now planned, i.e., (1) a prototype equipment functional tests using full scale mock-ups and (2) a full scale integration demonstration test facility with real components (vacuum vessel with ports, blanket modules, divertor modules, armor tiles, etc.). Crucial in-vessel and ex-vessel operations and the associated remote handling equipment, including handling of divertor plates and blanket modules will be demonstrated in the first phase, whereby the database needed to proceed with the engineering phase will be acquired. The second phase will demonstrate the ability of the overall system to execute the required maintenance procedures and evaluate the performance of the prototype equipment

  14. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Hirano, Yasushi; Hirukawa, Koji; Sakurada, Koichi.

    1994-01-01

    A bundle of fuel rods is divided into four fuel rod group regions of small fuel rod bundles by a cross-shaped partitioning structure consisting of paired plate-like structures which connect two opposing surfaces of a channel box. A water removing material with less neutron absorption (for example, Zr or a Zr alloy) or a solid moderator is inserted and secured to a portion of a non-boiling water region interposed between the paired plate-like structure. It has a structure that light water flows to the region in the plate-like structure. The volume, density or composition of the water removing material is controlled depending on the composition of the fuels, to change the moderating characteristics of neutrons in the non-boiling water region. This can easily moderate the difference of nuclear characteristics between each of fuel assemblies using fuel materials of different fuel compositions. Further, the reactivity control effect of the burnable poisons can be enhanced without worsening fuel economy or linear power density. (I.N.)

  15. Subcritical nuclear assembly

    Energy Technology Data Exchange (ETDEWEB)

    Vega C, H. R., E-mail: fermineutron@yahoo.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2014-08-15

    A Subcritical Nuclear Assembly is a device where the nuclear-fission chain reaction is initiated and maintained using an external neutron source. It is a valuable educational and research tool where in a safe way many reactor parameters can be measured. Here, we have used the Wigner-Seitz method in the six-factor formula to calculate the effective multiplication factor of a subcritical nuclear reactor Nuclear Chicago model 9000. This reactor has approximately 2500 kg of natural uranium heterogeneously distributed in slugs. The reactor uses a {sup 239}PuBe neutron source that is located in the center of an hexagonal array. Using Monte Carlo methods, with the MCNP5 code, a three-dimensional model of the subcritical reactor was designed to estimate the effective multiplication factor, the neutron spectra, the total and thermal neutron fluences along the radial and axial axis. With the neutron spectra in two locations outside the reactor the ambient dose equivalent were estimated. (Author)

  16. Animation with concurrent narration versus narration in physical education lesson

    Directory of Open Access Journals (Sweden)

    Ioannou Panagiotis

    2016-01-01

    Full Text Available The purpose of the present study was to compare the effects of two different teaching methods on students' comprehension during Physical Education lesson: narration versus animation with concurrent narration, during teaching shot put event. Thirty primary school children (boys and girls volunteered to participate in this study. In experiment students listened (narration and viewed (animation with narration the presentation of two shot putting styles. A problem-solving and a retention test were used to evaluate students' comprehension. Results showed that students' comprehension was better when shot putting styles were presented through a mixed model (animation and narration group than a single (narration. The animation with concurrent narration group performed better than the narration group, in problem-solving (M = 4.91, SD = 1.36 and in retention test (M = 5.98, SD = 1.28 t(28 = 1.89 p<0.01. An instructional implication is that pictures with words is more effective way of teaching when they occur continuingly in time, than only words during Physical Education lesson.

  17. Resource Management and Contingencies in Aerospace Concurrent Engineering

    Science.gov (United States)

    Karpati, Gabe; Hyde, Tupper; Peabody, Hume; Garrison, Matthew

    2012-01-01

    significant concern in designing complex systems implementing new technologies is that while knowledge about the system is acquired incrementally, substantial financial commitments, even make-or-break decisions, must be made upfront, essentially in the unknown. One practice that helps in dealing with this dichotomy is the smart embedding of contingencies and margins in the design to serve as buffers against surprises. This issue presents itself in full force in the aerospace industry, where unprecedented systems are formulated and committed to as a matter of routine. As more and more aerospace mission concepts are generated by concurrent design laboratories, it is imperative that such laboratories apply well thought-out contingency and margin structures to their designs. The first part of this publication provides an overview of resource management techniques and standards used in the aerospace industry. That is followed by a thought provoking treatise on margin policies. The expose presents the actual flight telemetry data recorded by the thermal discipline during several recent NASA Goddard Space Flight Center missions. The margins actually achieved in flight are compared against pre-flight predictions, and the appropriateness and the ramifications of having designed with rigid margins to bounding stacked worst case conditions are assessed. The second half of the paper examines the particular issues associated with the application of contingencies and margins in the concurrent engineering environment. In closure, a discipline-by-discipline disclosure of the contingency and margin policies in use at the Integrated Design Center at NASA s Goddard Space Flight Center is made.

  18. Sarcoidosis and multiple myeloma: Concurrent presentation of an unusual association

    Directory of Open Access Journals (Sweden)

    Vidya Nair

    2016-01-01

    Full Text Available Literature on concurrent association of sarcoidosis with lymphoproliferative malignancies other than lymphoma e.g. multiple myeloma is meager. The rarity of the situation prompted us to report this patient who was a 51-year-old woman with a 2-years history of breathlessness, cough with expectoration, chest pain and backache. Initial evaluation revealed mild anemia, increased alkaline phosphatase with chest skiagram showing both lower zone non homogenous opacities with calcified hilar lymph nodes. CECT chest showed mediastinal with bilateral hilar lymphadenopathy, parenchymal fibrosis, traction bronchiectasis, ground glass opacities, septal and peribronchovascular thickening affecting mid and lower lung zones bilaterally. MRI Dorsolumbar spine was suggestive of marrow infiltrative disorder. EBUS FNA of intrathoracic nodes, EBB and TBLB confirmed sarcoidosis. PET CT revealed hyper metabolic activity in lung, multiple lymph nodes and lytic bone lesions. Serum protein electrophoresis and immunofixation revealed a monoclonal paraprotein, immunoglobulin IgG kappa type. Bone marrow biopsy revealed an increase in plasma cells (15%, but no granulomas. Diagnosis of Indolent or multiple myeloma with sarcoidosis was established. 12 cases of sarcoidosis and multiple myeloma have been reported in literature, and mostly preceding the onset of multiple myeloma by many years, in our case both were diagnosed concurrently.

  19. Hickam's dictum: Myasthenia Gravis presenting concurrently with Graves' disease.

    Science.gov (United States)

    Sehgal, Shekhar; Rebello, Roshan; Wolmarans, Louise; Elston, Marianne

    2017-09-07

    We present two patients with Graves' disease and concurrent myasthenia gravis. The impact of the dual diagnosis on the clinical course and the potential for a delayed diagnosis of myasthenia gravis is discussed. Patient 1, a 28-year-old man was diagnosed with Graves' disease following his second respiratory arrest. His history was strongly suggestive of a second pathology. Patient 2, a 66-year-old Cantonese woman with established Graves' disease presented with thionamide-related neutropaenia. Examination revealed bilateral ptosis and right lateral rectus palsy. Both patients had thyrotoxicosis secondary to Graves' disease with concurrent myasthenia gravis. Although neuromuscular weakness is common in Graves' disease, coexisting myasthenia gravis (MG) is rare and can cause profound morbidity. Ocular signs in both diseases may cause diagnostic confusion although ptosis suggests coexisting MG. In both cases, the thyrotoxicosis delayed the diagnosis of MG. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. Retrospective Cost Adaptive Control with Concurrent Closed-Loop Identification

    Science.gov (United States)

    Sobolic, Frantisek M.

    Retrospective cost adaptive control (RCAC) is a discrete-time direct adaptive control algorithm for stabilization, command following, and disturbance rejection. RCAC is known to work on systems given minimal modeling information which is the leading numerator coefficient and any nonminimum-phase (NMP) zeros of the plant transfer function. This information is normally needed a priori and is key in the development of the filter, also known as the target model, within the retrospective performance variable. A novel approach to alleviate the need for prior modeling of both the leading coefficient of the plant transfer function as well as any NMP zeros is developed. The extension to the RCAC algorithm is the use of concurrent optimization of both the target model and the controller coefficients. Concurrent optimization of the target model and controller coefficients is a quadratic optimization problem in the target model and controller coefficients separately. However, this optimization problem is not convex as a joint function of both variables, and therefore nonconvex optimization methods are needed. Finally, insights within RCAC that include intercalated injection between the controller numerator and the denominator, unveil the workings of RCAC fitting a specific closed-loop transfer function to the target model. We exploit this interpretation by investigating several closed-loop identification architectures in order to extract this information for use in the target model.