WorldWideScience

Sample records for asphalts

  1. The Asphalt Handbook.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The new and completely revised edition of the Asphalt Handbook, a standard reference work in the field of asphalt technology and construction, summarizes with reference the information contained in other Asphalt Institute technical manuals. Major areas discussed include the following--(1) uses of asphalt, (2) terms relating to asphalt and its…

  2. Asphalt cement poisoning

    Science.gov (United States)

    ... petroleum material that hardens when it cools. Asphalt cement poisoning occurs when someone swallows asphalt. If hot ... found in: Road paving materials Roofing materials Tile cements Asphalt may also be used for other purposes.

  3. GREENPATCH® - Cold Mix Asphalt

    OpenAIRE

    ECT Team, Purdue

    2013-01-01

    GreenPatch® is environmentally friendly cold asphalt that is a direct replacement for traditional cold patch in repairing asphalt pavements. This revolutionary breakthrough in the cold asphalt industry contains no petroleum based softeners such as diesel, toluene, kerosene, and naphthalene found in conventional cold asphalt that pose serious threats to human health and the environment.

  4. Low temperature asphalt mixtures

    OpenAIRE

    Modrijan, Damjan

    2006-01-01

    This thesis presents the problem of manufacturing and building in the asphalt mixtures produced by the classical hot procedure and the possibility of manufacturing low temperature asphalt mixtures.We will see the main advantages of low temperature asphalt mixtures prepared with bitumen with organic addition Sasobit and compare it to the classical asphalt mixtures. The advantages and disadvantages of that are valued in the practical example in the conclusion.

  5. Performance of asphalt rubber mixtures

    OpenAIRE

    Thives, Liseane Padilha; Trichês, Glicério; Pereira, Paulo A. A.; Pais, Jorge C.

    2010-01-01

    Asphalt rubber mixtures are one of the most promising techniques to extend the service life of asphalt pavement overlays. Asphalt rubber binder is composed of crumb rubber from reclaimed tires and conventional asphalt. The asphalt rubber binder can be obtained through wet process in two different systems: terminal blending (produced at industrial plants) and continuous blending (produced in asphalt plants). This study presents a laboratory evaluation of asphalt rubber mixtures produced with d...

  6. Asphalt in Pavement Maintenance.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    Maintenance methods that can be used equally well in all regions of the country have been developed for the use of asphalt in pavement maintenance. Specific information covering methods, equipment and terminology that applies to the use of asphalt in the maintenance of all types of pavement structures, including shoulders, is provided. In many…

  7. Laboratory performance of asphalt rubber mixtures

    OpenAIRE

    Fontes, Liseane; Trichês, Glicério; Pais, Jorge; Pereira, Paulo; Minhoto, Manuel

    2009-01-01

    Asphalt rubber mixtures are one of the most promising techniques to extend the service life of asphalt pavement overlays. Asphalt rubber binder is composed of crumb rubber from reclaimed tires and conventional asphalt. The asphalt rubber binder can be obtained through wet process in two different systems: tire rubber modified asphalt binder (produced at industrial plants) and continuous blending (produced in asphalt plants). This study presents a laboratory evaluation of asphalt rubber mixtur...

  8. Asphalt chemical fractionation

    International Nuclear Information System (INIS)

    Asphalt fractionation were carried out in the Esmeraldas Oil Refinery using n-pentane, SiO2 and different mixture of benzene- methane. The fractions obtained were analyzed by Fourier's Transformed Infrared Spectrophotometry (FTIR)

  9. Modified Asphalt Binder with Natural Zeolite for Warm Mix Asphalt

    Science.gov (United States)

    Dubravský, Marián; Mandula, Ján

    2015-11-01

    In recent years, warm mix asphalt (WMA) is becoming more and more used in the asphalt industry. WMA provide a whole range of benefits, whether economic, environmental and ecological. Lower energy consumption and less pollution is the most advantages of this asphalt mixture. The paper deals with the addition of natural zeolite into the sub base asphalt layers, which is the essential constituent in the construction of the road. Measurement is focused on basic physic - mechanical properties declared according to the catalog data sheets. The aim of this article is to demonstrate the ability of addition the natural zeolite into the all asphalt layers of asphalt pavement. All asphalt mixtures were compared with reference asphalt mixture, which was prepared in reference temperature.

  10. A review of asphalt and asphalt mixture aging

    OpenAIRE

    Wilmar Darío Fernández-Gómez; Hugo Alexander Rondón Quintana; Fredy Reyes-Lizcano

    2012-01-01

    This paper presents an extensive review of the pertinent literature regarding asphalt and asphalt mixture Aging. Aging affects flexible pavement performance and is produced by intrinsic and extrinsic variables as well as exposure time. Intrinsic variables include asphalt and aggregate properties, a mixture’s asphalt content, binder film thickness and air void content; extrinsic variables are associated with production (short-term aging) and exposure to environmental field conditions (long-ter...

  11. Modified Asphalt Binder with Natural Zeolite for Warm Mix Asphalt

    OpenAIRE

    Dubravský Marián; Mandula Ján

    2015-01-01

    In recent years, warm mix asphalt (WMA) is becoming more and more used in the asphalt industry. WMA provide a whole range of benefits, whether economic, environmental and ecological. Lower energy consumption and less pollution is the most advantages of this asphalt mixture. The paper deals with the addition of natural zeolite into the sub base asphalt layers, which is the essential constituent in the construction of the road. Measurement is focused on basic physic – mechanical properties decl...

  12. Asphalt for draining pavement; Haisuisei hosoyo asphalt

    Energy Technology Data Exchange (ETDEWEB)

    Yamamori, H.; Nakamura, Y. [Mitsubishi Oil Co. Ltd., Tokyo (Japan)

    1994-12-28

    The effect and functions of draining pavement with a superb performance as a paved road were introduced. In the draining pavement, a porous asphalt mixture was used for the surface and base layers of the road and the remaining layers are not in water penetration property. It is necessary that void continues to prevent water film from being generated when rain falls and resistance against water flow is small but durability has problems when the void rate is large. According to the balance, the void rate ranges from 20 to 23 % for execution, thus preventing water splash on a rainy day, hydroplaning, and dazzlement, etc. due to reflection of light. The noise during driving due to the tire of an automobile is reduced by 5 to 6 dB owing to draining pavement. Also, engine noise is reduced to 40 - 60 % since the surface is porous. In the draining pavement, a high-viscosity asphalt is used for a binder and the void rate is large, thus preventing temperature to rise easily due to heat release and achieving an improved flow behavior. 6 refs., 11 figs., 14 tabs.

  13. Analysis of asphalt mixtures on town roads

    OpenAIRE

    Glavica, Primož

    2006-01-01

    Asphalt mixtures are most commonly used composite for construction of top layers of different drive ways. By definition asphalt mixtures are composed of crushed rock, fill, bitumen and additives. Percentage of individual components wary according to the purpose asphalt mixture is to be used for. Asphalt mixtures must be capable of enduring different types of load. According to the type of load asphalt mixtures are divided into asphalt mixtures used for supporting layers and asp...

  14. Laboratory evaluation of selected tar sand asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Button, J.W.; Epps, J.A.; Gallaway, B.M.

    1980-12-01

    Three tar sand asphalts of similar grades prepared from one syncrude by three different refining methods were characterized by tests commonly used to specify paving asphalts together with certain special tests. Asphalt-aggregate mixtures were prepared using these asphalts and tested in the laboratory to determine strength stiffness stability, tensile properties, temperature effects and water susceptibility. Comparison of the tar sand asphalt properties to conventional petroleum asphalt properties reveal no striking differences.

  15. A review of asphalt and asphalt mixture aging

    Directory of Open Access Journals (Sweden)

    Wilmar Darío Fernández-Gómez

    2012-09-01

    Full Text Available This paper presents an extensive review of the pertinent literature regarding asphalt and asphalt mixture Aging. Aging affects flexible pavement performance and is produced by intrinsic and extrinsic variables as well as exposure time. Intrinsic variables include asphalt and aggregate properties, a mixture’s asphalt content, binder film thickness and air void content; extrinsic variables are associated with production (short-term aging and exposure to environmental field conditions (long-term aging. Taken together, both variables demonstrate that aging results from three distinct mechanisms: volatilisation, oxidation and steric hardening. Temperature, pressure and photo degradation treatments are used to simulate aging in the laboratory and empirical and semi-empirical models are created to represent and study aging. Aging increases asphalt complex modulus and decreases the phase angle. Mixtures become stiffer while fatigue life becomes reduced. Carbonyl and sulfoxide group formation in asphalt are often studied as such chemical changes show oxidation in aged asphalts. The prevailing models used to predict asphalt aging are discussed, though more comprehensive research into asphalt aging is still needed.

  16. Polymer Blends Modified Asphalt

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Asphalt is an important low-cost thermo-plastic material which is widely used for construction, in particular as road-paving. Therefore it is exposed to a wide range of load and weather conditions. Increasing traffic factors, such as heavier loads, higher traffic volume and higher tire pressure demand higher performance pavements. However, this kind of materials does not have good mechanical properties because it is hard and brittle in cold weather, and soft and fluid in a hot environment.

  17. Modeling Recycling Asphalt Pavement Processing Technologies in Asphalt Mixing Plants

    OpenAIRE

    Simonas Tamaliūnas; Henrikas Sivilevičius

    2011-01-01

    The article presents reclaimed asphalt pavement (RAP) processing technologies and equipment models used in the asphalt mixing plant (AMP). The schematic model indicating all possible ways to process RAP in AMP is shown. The model calculating the needed temperature of mineral materials used for heating RAP is given and an example of such calculation is provided.Article in Lithuanian

  18. Performance prediction of hot mix asphalt from asphalt binders

    International Nuclear Information System (INIS)

    Asphalt binder being a high weight hydrocarbon contains asphaltene and maltene and is widely used as cementing materials in the construction of flexible pavements. Its performance in hot mix asphalt also depends on combining with different proportions of aggregates. The main objective of this study was to characterize asphalt cement rheological behavior and to investigate the influence of asphalt on asphalt-aggregate mixtures prepared with virgin binders and using polymers. Binder rheology and mixtures stiffness were determined under a range of cyclic loadings and temperature conditions. Master curves were developed for the evaluation of relationship between parameters like complex modulus and phase angle at different frequencies. Horizontal shift factors were also computed to determine time and temperature response of binders and mixes. The results showed that the stiffness of both the binder and the mixes depends on temperature and frequency of load. Polymer modified binder is least susceptible to temperature variations as compared to other virgin asphalt cement. Performance of asphalt mixtures can be predicted from those of asphalt binders using the master curve technique. (author)

  19. Dead sea asphalts: historical aspects

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, A.

    1978-05-01

    Asphalts are present in the Dead Sea basin in three forms: (1) huge blocks, up to 100 tons in weight, composed of extremely pure (>99.99%) solid asphalt occasionally found floating on the lake, (2) veins, seepages, and cavity and fissure fillings in Lower Cretaceous to Holocene rocks, and (3) ozocerite veins on the eastern shore of the lake. Dead Sea asphalts probably have been documented over a longer period of time than any other hydrocarbon deposit--from antiquity to the 19th century. Major uses of asphalt from the Dead Sea have been as an ingredient in the embalming process, for medicinal purposes, for fumigation, and for agriculture. The first known war for control of a hydrocarbon deposit was in the Dead Sea area in 312 B.C. between the Seleucid Syrians and the Nabatean Arabs who lived around the lake. Surface manifestations of asphalt are linked closely to tectonic activity. In the lake itself, the asphalt is associated with diapirs During certain historic periods, tectonic and diapiric activity caused frequent liberation to the Dead Sea surface of semiliquid asphalt associated with large amounts of hydrogen sulfide gas. When the tectonic activity was attenuated, as in the 19th and 20th centuries, the rate of asphalt seepage to the bottom sediments of the Dead Sea was much slower and the asphalt solidified on the lake bottom. The release of asphalt to the surface became much more sporadic, and may have resulted in part from earthquakes. Thus, future asphalt prospecting in the Dead Sea area should be conducted along the boundaries of diapirs or their associated faults.

  20. Polyurethane synthesis reactions in asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Bukowski, A.; Gretkiewicz, J.

    1982-04-01

    A series of asphalt-polyurethane composites was prepared by means of polyurethane synthesis in asphalt and carried out in melt. The applied materials were asphalts of differentiated group components content, polyester polyols of chain structure from linear to strongly branched, 2,4-tolylene diisocyanate, 4,4-methylenebis(phenyl isocyanate), and tinorganic catalyst. The asphalt components react with isocyanates to a minimal degree. The influence of the applied substrates, temperature, and polyurethane content in the system on the basic kinetic relations characterizing the process is presented. Polyurethane synthesis in asphalts does not differ in a fundamental way from the obtaining of polyurethanes, especially when their content in the composition is significant, 20 wt% and more.

  1. Preparation and properties of montmorillonite modified asphalts

    International Nuclear Information System (INIS)

    Modified asphalts were prepared by melt blending with different contents of montmorillonite (MMT) and organomodified montmorillonite (OMMT). The X-ray diffraction (XRD) results show that the MMT modified asphalt may form an intercalated structure, whereas the OMMT modified asphalt may form an exfoliated structure. The addition of MMT and OMMT to asphalt increases both the softening point and viscosity of the modified asphalts at high temperatures. Furthermore, the modified asphalts exhibited higher complex modulus, lower phase angle. As a consequence, the MMT and OMMT modified asphalts displays enhanced viscoelastic properties, which improve its resistance to rutting at high temperatures. Compared with MMT, OMMT showed better effect in improving softening point and rutting resistance of asphalt, which contributes to the formation of exfoliated structure in OMMT modified asphalt. Storage stability tests disclose that the asphalts modified with MMT or OMMT are very stable when montmorillonite content is less than 3 wt%

  2. Asphalt Mixture for the First Asphalt Concrete Directly Fastened Track in Korea

    OpenAIRE

    Seong-Hyeok Lee; Dae-Wook Park; Hai Viet Vo; Samer Dessouky

    2015-01-01

    The research has been initiated to develop the asphalt mixtures which are suitable for the surface of asphalt concrete directly fastened track (ADFT) system and evaluate the performance of the asphalt mixture. Three aggregate gradations which are upper (finer), medium, and below (coarser). The nominal maximum aggregate size of asphalt mixture was 10 mm. Asphalt mixture design was conducted at 3 percent air voids using Marshall mix design method. To make impermeable asphalt mixture surface, th...

  3. Polymer Blends Modified Asphalt

    Institute of Scientific and Technical Information of China (English)

    WANG; YunPu

    2001-01-01

    Asphalt is an important low-cost thermo-plastic material which is widely used for construction, in particular as road-paving. Therefore it is exposed to a wide range of load and weather conditions. Increasing traffic factors, such as heavier loads, higher traffic volume and higher tire pressure demand higher performance pavements. However, this kind of materials does not have good mechanical properties because it is hard and brittle in cold weather, and soft and fluid in a hot environment.  ……

  4. Investigation of modified asphalt concrete

    Science.gov (United States)

    Zimich, Vita

    2016-01-01

    Currently the problem of improving the asphalt quality is very urgent. It is used primarily as topcoats exposed to the greatest relative to the other layers of the road, dynamic load - impact and shear. The number of cars on the road, the speed of their movement, as well as the traffic intensity increase day by day. We have to upgrade motor roads, which entails a huge cost. World experience shows that the issue is urgent not only in Russia, but also in many countries in Europe, USA and Asia. Thus, the subject of research is the resistance of asphalt concrete to water and its influence on the strength of the material at different temperatures, and resistance of pavement to deformation. It is appropriate to search for new modifiers for asphaltic binder and mineral additives for asphalt mix to form in complex the skeleton of the future asphalt concrete, resistant to atmospheric condensation, soil characteristics of the road construction area, as well as the growing road transport load. The important task of the work is searching special modifying additives for bitumen binder and asphalt mixture as a whole, which will improve the quality of highways, increasing the period between repairs. The methods described in the normative-technical documentation were used for the research. The conducted research allowed reducing the frequency of road maintenance for 7 years, increasing it from 17 to 25 years.

  5. Determination of the asphalt content of the asphalt concrete by surface neutron gauge

    International Nuclear Information System (INIS)

    This paper describes the principle, calibration and field detection of determining the asphalt content of asphalt concrete by surface neutron gauge. This method can be utilized to measure the asphalt content for asphalt concrete dams, highways and airport runways to control the engineering quality

  6. Self Healing Capacity of Asphalt Binders

    Institute of Scientific and Technical Information of China (English)

    PANG Ling; JIANG Huan; WU Shuxiang; WU Shaopeng

    2012-01-01

    To test self healing capability of asphalt binders,three asphalt specimens (pure asphalt,modified asphalt and aged asphalt) were prepared.Every specimen was tested by dynamic shear rheometer (DSR).The temperature sweeps result indicates that both aging and SBS modifying influence the self healing capability of asphalt binder.The fatigue-heal-fatigue test was introduced to study the self healing capability of asphalt in its serving periods.Furthermore,three different periods (0.5 h,1 h,3 h) were set up to study the influence of rest time on fatigue time.It is concluded that longer rest time,less load will delay the appearance of cracks and extend the service life of asphalt binders.

  7. Nanomaterials Applied in Asphalt Modification: A Review

    Institute of Scientific and Technical Information of China (English)

    Changqing Fang; Ruien Yu; Shaolong Liu; Yan Li

    2013-01-01

    Nanotechnology has been gradually penetrated into the field of asphalt modification.Seemingly magic effects of nanomaterials have now been brought to improve the performance of asphalt.To demonstrate many of the prospective applications,researchers have conducted a series of positive and effective efforts dealing with the preparation of modified asphalt to demonstrate the mechanism of modification and the resultant improvement in performance.In this review,various nanomaterials used in asphalt modification are initially presented,followed by the methods employed to modify the asphalt with these materials and finally the effects of nanomaterials on the performance of base asphalt are presented and the modification mechanisms are discussed.Based on the current research results,the influence of preparation process parameters on the compatibility of every phase in the modified asphalt and the stability of the modified asphalt system are described.Finally,the development trend of the topic field is projected.

  8. Laboratory aging of asphalt mixtures : simulation of reclaimed asphalt and application as test method for durability

    OpenAIRE

    Mollenhauer, Konrad; MOUILLET, Virginie; PIERARD, Nathalie; TUSAR, Marjan; Gabet, Thomas

    2012-01-01

    Surface asphalt courses reach their end of service life after a time span between 10 and 30 years, depending on their durability. Afterwards, the surface layer is usually milled and reused in asphalt mixtures as reclaimed asphalt. In order to enable the analysis of durability and recyclability of a new asphalt mixture, four laboratory aging procedures were designed and comparatively applied on twoasphalt mixes. Besides aging of loose asphalt mix in heating cabinets at varied temperatures and ...

  9. Laboratory optimization of continuous blend asphalt rubber

    OpenAIRE

    Fontes, Liseane P. T. L.; Pereira, Paulo A. A.; Trichês, Glicério; Pais, Jorge C.; Luzia, Rosa

    2008-01-01

    Asphalt rubber from wet process requires batching blending and reaction time associated to blending rubber and conventional asphalt to produce asphalt rubber. The ideal blending of these materials depends on the combination of very important variables, such as the amount of rubber, reaction time and temperature reaction. This paper intends to optimize the laboratory production of asphalt rubber using the continuous blend process. The rubber from waste tyres was reduced by ambient grinding and...

  10. Evaluating permanent deformation in asphalt rubber mixtures

    OpenAIRE

    Fontes, Liseane P. T. L.; Trichês, Glicério; Pais, Jorge C.; Pereira, Paulo A. A.

    2009-01-01

    Permanent deformation or rutting, one of the most important distresses inflexible pavements, has long been a problem in asphalt mixtures. Throughout the years, researchers have used different test methods lo estimate the performance of asphalt mixtures in relation to rutting. One of the alternatives to reduce permanent deformation in asphalt pavement layers is through the use of mixtures produced with asphalt rubber This work aims at comparing the performance of a conventional dense graded mi...

  11. Asphalt Carriers from Kraljevica Shipyard, Croatia

    OpenAIRE

    Grubišić, R.

    2006-01-01

    This article is based on the materials presented by the experts from Kraljevica Shipyard at the annual meeting of the Croatian shipbuilding designers held in Kraljevica in October 2005. Asphalt tanker Asphalt Seminole and her sister-ships are rather sophisticated vessels having a complex hull structure, cargo space and cargo survey and control equipment. Therefore, firstly the technical data of the already delivered asphalt tanker Asphalt Seminole are given and then, the very interesting d...

  12. Sinopec Launches Shanghai Asphalt Sales Company

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Sinopec Shanghai Asphalt Sales Company was launched in Shanghai on September 22, marking Sinopec as the largest asphalt supplier in China integrated in famous brand,production, sales and research, and distribution network.This is another important initiative for Sinopec's asphalt segment, after Sinopec won the bid for construction of F 1 racing course, to grasp the market opportunities, further improve the product quality and the level of after-sales services, and further make its asphalt business larger and stronger.

  13. Floating asphalt blocks of the Dead Sea

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, A. (Weizmann Inst. of Science, Rehovot, Israel); Aizenshtat, Z.; Goldberg, M.

    1980-01-01

    Large blocks of mineral matter free (less than 0.1%) asphalt are occasionally found floating on the surface of the Dead Sea. Chemical, spectroscopic and isotopic data are given for the asphalt. The source of the asphalt is not accurately known, but presumably it represents mobilization of heavy viscous asphaltic masses at depth below the lake bottom into the floor of the lake. It may be released to the surface by earth tremors.

  14. The improvement of pavement performance using asphalt rubber hot mixes

    OpenAIRE

    Pais, Jorge C.; Pereira, Paulo A. A.

    2007-01-01

    The need of a better pavement performance has led researchers to develop new road materials, mainly for the asphalt layers, where the modification of the asphalt is the main example. This modification usually forces the use of polymers and fibers and, more recently, the use of crumb rubber from ground tires, where the modified asphalt is known as asphalt rubber. This asphalt rubber used in asphalt mixtures produces a superior performance if compared to the asphalt mixtures with...

  15. Initiative assessment of asphalt works

    International Nuclear Information System (INIS)

    Several asphalt works are utilizing heat from combustion of used oil for drying and heating of rock material in the production of asphalt. According to new regulations on combustion of waste, used oil is to be regarded as waste and subject to emission requirements according to the combustion regulations. Measurements show that emissions of CO, dust, dioxins, TOC and SO2 exceed the limits set by the regulations. To conform to the regulations these asphalt works must improve their combustion technique. However, such measures may lead to increased formation of NOx. It is recommended that a combustion chamber for drying of rock material should be used in order to reduce the emissions of CO and TOC concentrations. The concentration of SO2 may be reduced by dry cleaning by means of injection of lime. In the same way, active carbon is injected to remove dioxins. The asphalt works must be outfitted with measuring equipment that monitors and records certain operation and control parameters and some emission to air parameters. Periodic measurements are to be done of heavy metals and dioxins. It is estimated that the measures necessary to make the asphalt works comply with the regulations will cost about NOK 4 530 000 in investment per plant and that the operation expenses will increase by NOK 700 000 per year per plant. This includes maintenance, control etc

  16. Waterproofing improvement of radioactive waste asphalt solid

    International Nuclear Information System (INIS)

    Purpose: To improve the waterproofing of asphalt solid by adding an alkaline earth metal salt and, further, paraffin, into radioactive liquid waste when processing asphalt solidification of the radioactive liquid waste. Method: Before processing molten asphalt solidification of radioactive liquid waste, soluble salts of alkaline earth metal such as calcium chloride, magnesium chloride, or the like is added to the radioactive liquid waste. Paraffin having a melting point of higher than 600C, for example, is added to the asphalt, and waterproofing can be remarkably improved. The waste asphalt solid thus fabricated can prevent the swelling thereof, and can improve its waterproofing. (Yoshihara, H.)

  17. Thermal behavior of asphalt cements

    International Nuclear Information System (INIS)

    Asphalt cements are highly complex mixtures of hydrocarbon molecules whose thermal behavior is of prime importance for petroleum and road industry. From DSC, the determination of several thermal properties of asphalts is given, e.g. glass-transition temperature and crystallized fraction content.The dissolution of a pure n-paraffin CnH2n+2 in an asphalt, as seen by DSC, should be a single peak. For 20g of these glasses change with time and temperature. The formation of the crystallized phases is superposed to the enthalpic relaxation of the glasses, making a kinetic study very difficult. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  18. Asphalt Mixture for the First Asphalt Concrete Directly Fastened Track in Korea

    Directory of Open Access Journals (Sweden)

    Seong-Hyeok Lee

    2015-01-01

    Full Text Available The research has been initiated to develop the asphalt mixtures which are suitable for the surface of asphalt concrete directly fastened track (ADFT system and evaluate the performance of the asphalt mixture. Three aggregate gradations which are upper (finer, medium, and below (coarser. The nominal maximum aggregate size of asphalt mixture was 10 mm. Asphalt mixture design was conducted at 3 percent air voids using Marshall mix design method. To make impermeable asphalt mixture surface, the laboratory permeability test was conducted for asphalt mixtures of three different aggregate gradations using asphalt mixture permeability tester. Moisture susceptibility test was conducted based on AASHTO T 283. The stripping percentage of asphalt mixtures was measured using a digital camera and analyzed based on image analysis techniques. Based on the limited research results, the finer aggregate gradation is the most suitable for asphalt mixture for ADFT system with the high TSR value and the low stripping percentage and permeable coefficient. Flow number and beam fatigue tests for finer aggregate asphalt mixture were conducted to characterize the performance of asphalt mixtures containing two modified asphalt binders: STE-10 which is styrene-butadiene-styrene (SBS polymer and ARMA which is Crum rubber modified asphalt. The performance tests indicate that the STE-10 shows the higher rutting life and fatigue life.

  19. Evaluation on Low Temperature Performance of Recycled Asphalt Mixture Using Warm Mix Asphalt Technology

    Directory of Open Access Journals (Sweden)

    Xiaolan Duan,

    2015-04-01

    Full Text Available In this paper, the basic idea is about the recycled technology of asphalt mixture, more in-depth study of the lowtemperature performance of warm mix asphalt(WMA.First of all, Including the evaluation of low temperature performance of WMA made of reclaimed asphalt pavement (RAP (passed and not passed 2.36mm screen, and the influence of WMA with RAP mixed of different dosage of dispersant. Then, using the SBS modified asphalt and base asphalt were test at low temperature, research on the influence of different type of asphalt to the low temperature performance of WMA.

  20. Rheological characteristics of aged asphalt binder

    Institute of Scientific and Technical Information of China (English)

    刘聪慧; 吴少鹏; 刘全涛; 朱国军

    2008-01-01

    Different aging levels(RTFOT,PAV-10h,PAV-20h and PAV-30 h) of asphalt binders with various mass ratios of mineral powder to asphalt(0,0.4,0.8,1.2,1.6,2.0) were used to investigate the rheological properties of aged asphalt binders with respect to their short and long terms aging characteristics.Viscosity test,dynamic shear test and creep test were conducted.The test results indicate that the viscosity of aged asphalt binder increases sharply with the extension of aging period.Complex shear modulus of aged asphalt increases,which indicates that the stiffness of asphalt binders can increase.The phase angle for aged asphalt binders reduces,which indicates that the elastic portion for viscoelastic property of asphalt binders increases.|G*|·sin δ increases after aging procedure which means that the fatigue resistance becomes poor.The creep test results show that creep strain curves varies remarkably for virgin and aged asphalt binders.The total strain during loading period and the permanent strain decreases significantly for aged asphalt binders,which implies that the elastic portion increases and the viscous portion decreases.

  1. The Development of Recycling Agent for Asphalt Pavement

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A type of recycling agent was developed and its use for modifying used asphalt is described.The results show that the viscosity and three main properties of the aged asphalt were remarkably improved.With 5%-7% content of recycling agent, the main properties of recycled asphalt comported with China GB asphalt standard AH-70 and the recycled asphalt concrete could be used as high-grade highway.Furthermore,the recycling mechanism of the aged asphalt is discussed.

  2. Evaluation of Marshall Properties of Warm Mix Asphalt using Sasobit

    OpenAIRE

    Renugadevi. A

    2014-01-01

    With increasing concerns of global warming and increasing exhaustion of greenhouse gases, the asphalt industry is looking for alternatives for hot mix asphalt (HMA).Warm Mix Asphalt (WMA) is a fast emerging new technology which has a potential of revolutionizing the production of asphalt mixtures. WMA technology allows the mixing, lay down and compaction of asphalt mixes at significantly lower temperatures compared to Hot Mix Asphalt (HMA). The technology can reduce production tem...

  3. Microstructural characterisation of rubber modified asphalt mixtures

    OpenAIRE

    Abdul Hassan, Norhidayah

    2013-01-01

    Research to improve the performance of asphalt mixtures through the addition of crumb rubber using the dry process has continued worldwide because of its potential as a recycling option for used tires. For decades, dry mixed rubberised asphalt mixtures have performed inconsistently in field trials and laboratory evaluations. However, current research has revealed that the performance of asphalt mixtures is highly dependent on the characteristics of its internal structure or phase constituents...

  4. Construction and maintenace of porous asphalt

    OpenAIRE

    Kert, Gregor

    2012-01-01

    In improving traffic safety and reducing traffic noise road building experts from Slovenia and the world are faced with permeable surfaces - namely porous asphalt. There is hardly any water retention on road surfaces with the use of porous asphalt, what Slovenian engineers efficiently use on motorways where transverse profile changes its direction. Lately, porous asphalt is also being used for traffic noise reduction. However, porous road surface has some important disadvantages due to its...

  5. Asphalt solar collectors: A literature review

    OpenAIRE

    Bobes-Jesús, Vanesa; Pascual Muñoz, Pablo; Castro Fresno, Daniel; Rodríguez Hernández, Jorge

    2013-01-01

    Asphalt pavements subject to solar radiation can reach high temperatures causing not only environmental problems such as the heat island effect on cities but also structural damage due to rutting or hardening as a result of thermal cycles. Asphalt solar collectors are doubly effective active systems: as they solve the previously mentioned problems and, moreover, they can harness energy to be used in different applications. The main findings of the existing research on asphalt solar collectors...

  6. Asphalt solar collectors: A literature review

    International Nuclear Information System (INIS)

    Highlights: ► Solar energy can be harnessed by asphalt pavements. ► Research on asphalt thermal behavior and asphalt solar collectors is reviewed. ► Asphalt temperature is very sensitive to the variation of absortivity. ► Asphalt solar collector efficiency depends on flow rate and geometrical parameters. -- Abstract: Asphalt pavements subject to solar radiation can reach high temperatures causing not only environmental problems such as the heat island effect on cities but also structural damage due to rutting or hardening as a result of thermal cycles. Asphalt solar collectors are doubly effective active systems: as they solve the previously mentioned problems and, moreover, they can harness energy to be used in different applications. The main findings of the existing research on asphalt solar collectors are gathered together in this review paper. Firstly, the main heat transfer mechanisms involved in the solar energy collection process are identified and the most important parameters and variables are presented. After analyzing the theoretical foundations of the heat transfer process, this review focuses on the types of studies carried out so far on asphalt’s thermal behavior, different methodologies employed by other authors to study asphalt solar collectors and influence of the variables involved in thermal energy harvesting.

  7. Impact of defective production of asphalt mixture resulting in damaged asphalt layers

    OpenAIRE

    Hrovat, Tea

    2013-01-01

    In practice it often happens that a newly built road soon, after the asphalt mixture is added, starts showing first cracks and damages, which are not necessarily always a fault of the contractor, who built in the asphalt mixture, but can derive from the production of asphalt mixture. Such mistakes in the production of the asphalt mixture are hard to prove, since all the contractors usually put the blame on the automatic mixing production in the asphalt plant. During the production of the asph...

  8. Analysing polystyrene-modified asphalt and its incidence in a heat-dense asphalt mixture

    OpenAIRE

    Ana Sofía Figueroa Infante; Fredy Alberto Reyes Lizcano; Diana Hernández Barrera; Christian Jiménez; Natalia Bohórquez

    2010-01-01

    This article presents some results obtained with an MDC-2 asphalt/polystyrene-modified asphalt mixture as a result of crushing waste glass. The stone, asphalt and polystyrene materials’ were characterised for drawing up the design. The Marshal method was used for obtaining the best asphalt- stone-polystyrene percentages. The Superpave method was used for analysing the asphalt; the mixture’s dynamic behaviour was analysed using a test involving 20ºC and 30ºC trapezoidal fatigue for 90x10-6, 15...

  9. Evaluation on Low Temperature Performance of Recycled Asphalt Mixture Using Warm Mix Asphalt Technology

    OpenAIRE

    Xiaolan Duan,; Chunge Li

    2015-01-01

    In this paper, the basic idea is about the recycled technology of asphalt mixture, more in-depth study of the lowtemperature performance of warm mix asphalt(WMA).First of all, Including the evaluation of low temperature performance of WMA made of reclaimed asphalt pavement (RAP) (passed and not passed 2.36mm screen), and the influence of WMA with RAP mixed of different dosage of dispersant. Then, using the SBS modified asphalt and base asphalt were test at low temperature, researc...

  10. Rheological characterization of aged asphalts

    International Nuclear Information System (INIS)

    The present work shows the rheological properties of the three Colombian asphalts produced in the refineries at Barrancabermeja, Cartagena and Apiay, exposed to the open air during 18 months using a specially designed testing bank. rheological behavior was evaluated using the new specifications of SHRP technology in the Brookfield and DSR rheometers to determine viscosity, shear stress, shear rate, dynamic share modulus and other related variables. The measurements were made using different temperatures and load times

  11. Resonance Testing of Asphalt Concrete

    OpenAIRE

    Gudmarsson, Anders

    2014-01-01

    This thesis present novel non-destructive laboratory test methods to characterize asphalt concrete. The testing is based on frequency response measurements of specimens where resonance frequencies play a key role to derive material properties such as the complex modulus and complex Poisson’s ratio. These material properties are directly related to pavement quality and used in thickness design of pavements. Since conventional cyclic loading is expensive, time consuming and complicated to perfo...

  12. Asphalt solidification of mixed wastes

    International Nuclear Information System (INIS)

    Mixed wastes pose a problem to generators since there are no burial sites or treatment facilities currently accepting this waste type. One potential disposal method is treating the waste to render it non-hazardous, and disposing of it in accordance with radioactive waste requirements. A possible means of accomplishing this transformation is solidifying the waste in asphalt (bitumen). Associated Technologies Incorporated, in cooperation with Oak Ridge National Laboratory, solidified in asphalt a surrogate sodium nitrate-based waste, spiked with EPtoxic metals and non-radioactive cesium and strontium. This paper reports the characteristics of the spiked ORNL solution that was solidified as well as the properties of the solidified end product. The waste samples generated underwent EP toxicity testing as well as ANS 16.1 leach testing for 90 days and the results of those tests are presented. Also, a discussion of the criteria for classifying a waste as hazardous are included in order to demonstrate that the waste, once solidified in asphalt, may no longer be considered hazardous

  13. Sustainable asphalt pavement: Application of slaughterhouse waste oil and fly ash in asphalt binder

    Science.gov (United States)

    Sanchez Ramos, Jorge Luis

    Increasing energy costs, lack of sufficient natural resources and the overwhelming demand for petroleum has stimulated the development of alternative binders to modify or replace petroleum-based asphalt binders. In the United States, the petroleum-based asphalt binder is mainly used to produce the Hot Mix Asphalt (HMA). There are approximately 4000 asphalt plants that make 500 million tons of asphalt binder valued at roughly 3 billion/year. The instability of the world's oil market has pushed oil prices to more than 80 per barrel in 2012, which increased the cost of asphalt binder up to $570 per ton. Therefore, there is a timely need to find alternative sustainable resources to the asphalt binder. This paper investigates the possibility of the partial replacement of the asphalt binder with slaughterhouse waste and/or fly ash. In order to achieve this objective, the asphalt binder is mixed with different percentages of waste oil and/or fly ash. In order to investigate the effect of these additives to the performance of the asphalt binder, a complete performance grade test performed on multiple samples. The results of the performance grade tests are compared with a control sample to observe how the addition of the waste oil and/or fly ash affects the sample. Considering the increasing cost and demand of asphalt, the use of slaughterhouse waste oil and/or fly ash as a partial replacement may result in environmental and monetary improvements in the transportation sector.

  14. Hot Mix Asphalt Recycling: Practices and Principles

    NARCIS (Netherlands)

    Mohajeri, M.

    2015-01-01

    Hot mix asphalt recycling has become common practice all over the world since the 1970s because of the crisis in oil prices. In the Netherlands, hot recycling has advanced to such an extent that in most of the mixtures more than 50% of reclaimed asphalt (RA) is allowed. These mixtures with such a hi

  15. EVALUATION OF EMISSIONS FROM PAVING ASPHALTS

    Science.gov (United States)

    The report provides data from pilot-scale measurements of the emissions of specific air pollutants from paving asphalt both with and without recycled crumb rubber additives. The methods used in this work measured emissions from a static layer of asphalt maintained for several hou...

  16. EVALUATION OF EMISSION FROM PAVING ASPHALTS

    Science.gov (United States)

    The report provides data from pilot-scale measurements of the emissions of specific air pollutants from paving asphalt both with and without recycled crumb rubber additives. he methods used in this work measured emissions from a static layer of asphalt maintained for several hour...

  17. Asphalt Raking. Instructor Manual. Trainee Manual.

    Science.gov (United States)

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet consists of the instructor and trainee manuals for an asphalt raking course. The instructor manual contains a course schedule for 4 days of instruction, content outline, and instructor outline. The trainee manual is divided into five sections: safety, asphalt basics, placing methods, repair and patching, and clean-up and maintenance.…

  18. Environmental Benefits of Warm Mix Asphalt

    OpenAIRE

    Zaumanis, M; OLESEN, E

    2010-01-01

    WMA is a relatively new technology that allows significant lowering of the production and pavement temperature of conventional hot mix asphalt (HMA). It promises various benefits, but probably the most significant is the possibility to reduce carbon footprint of asphalt thus supporting the demands of Kyoto protocol for lowering greenhouse gas emissions in the atmosphere.

  19. Asbestos Tailings as Aggregates for Asphalt Mixture

    Institute of Scientific and Technical Information of China (English)

    LIU Xinoming; XU Linrong

    2011-01-01

    To use many asbestos tailings collected in Ya-Lu highway, and to explore the feasibility of using asbestos tailings as aggregates in common asphalt mixtures, and properties of some asphalt mixtures were evaluated as well. X-ray diffraction (XRD), X-ray fluorescent (XRF), and atomic absorption spectrophotometry (AAS) were employed to determine the solid waste content of copper, zinc, lead, and cadmium. Volume properties and pavement performances of AC-25 asphalt mixture with asbestos tailings were also evaluated compared with those with basalt as aggregates.XRD and XRF measurement results infer that asbestos tailing is an excellent road material. Volume properties of AC-25 asphalt mixture with asbestos tailings satisfied the related specifications. No heavy metals and toxic pollution were detected in AAS test and the value of pH test is 8.23, which is help to the adhesion with asphalt in the asphalt concrete. When compared with basalt, high temperature property and the resistance to low temperature cracking of AC-25 asphalt mixture was improved by using asbestos tailings as aggregates. In-service AC-25 asphalt pavement with asbestos tailings also presented excellent performance and British Pendulum Number (BPN) coefficient of surface.

  20. Rheological Evaluation of Polymer Modiifed Asphalt Binders

    Institute of Scientific and Technical Information of China (English)

    WANG Lan; CHANG Chunqing

    2015-01-01

    The microstructure and dynamic rheological characteristics of asphalt containing different polymer modifiers (crumb rubber, styrene-butadiene-styrene and crumb rubber mix with styrene-butadiene-styrene) at mid and high service temperature levels were investigated by using scanning electron microscopy(SEM), dynamic shear rheometer(DSR) and repeat creep test. The main objective of the investigation was to rank the modifiers based on their effect on performance characteristics of asphalt under service conditions. To evaluate the effect of different modiifers on the viscoelastic response of asphalt, the temperature and frequency dependences of the dynamic viscoelastic properties were compared. The mid-temperature fatigue resistance and high-temperature rutting resistance of three polymer modiifed asphalts were evaluated to predict their ifeld performance in roads. Based on the current results, an improved rutting factor was proposed to determine the rutting resistance of asphalt pavements. In addition, the viscous stiffness (Gv), deifned as the reciprocal of viscous compliance, was used to evaluate the high-temperature deformation resistance of asphalt mixtures. The experimental results indicate that the asphalt containing crumb rubber only shows superior performance at mid and high service temperatures in all three modiifed asphalt binders due to the action of the crumb rubber.

  1. Environmental Benefits of Warm Mix Asphalt (WMA)

    OpenAIRE

    Zaumanis, M; Olesen, E

    2010-01-01

    Warm Mix Asphalt technology promises various benefits, but probably the most significant is the possibility to reduce carbon footprint of asphalt. The degree of emission reduction depends on the production technology, therefore life cycle assessment tool is vital to calculate the benefits and compare technologies.

  2. Curing Reaction Model of Epoxy Asphalt Binder

    Institute of Scientific and Technical Information of China (English)

    QIAN Zhendong; CHEN Leilei; WANG Yaqi; SHEN Jialin

    2012-01-01

    In order to understand the strength developing law of the epoxy asphalt mixture,a curing reaction model of the epoxy asphalt binder was proposed based upon the thermokinetic analysis.Given some assumptions,the model was developed by applying the Kissinger law as well as Arrhenius equation,and the differential scanning calorimetry was performed for estimating the model parameters.To monitor the strength development of the epoxy asphalt mixture,a strength test program was employed and then results were compared to those produced from the proposed model.The comparative evaluation shows that a good consistency exists between the outputs from test program and the proposed model,indicating that the proposed model can be used effectively for simulating the curing reaction process for the epoxy asphalt binder and predicting the strength development for the epoxy asphalt mixture.

  3. USE OF RECLAIMED ASPHALT PAVEMENT WITH MILLED ROAD PAVEMENT LAYERS

    Directory of Open Access Journals (Sweden)

    Andrzej Plewa

    2015-07-01

    Full Text Available The article presents the results of research on the functional properties of asphalt mixes using RAP obtained from milling asphalt road pavements. Asphalt concrete AC 22P with 0%, 10%, 15% and 20% addition of RAP used for base course of road pavements were designed. It was found that asphalt mixes with RAP characterized by comparable and in some cases better functional properties compared to the asphalt mixes without RAP (0%. One should notice the influence of RAP on the performance and durability of the asphalt mixtures, as compared to virgin asphalt mixtures (without RAP.

  4. Strength Mechanism and Influence Factors for Cold Recycled Asphalt Mixture

    OpenAIRE

    Tao Ma; Hao Wang; Yongli Zhao; Xiaoming Huang; Yuhui Pi

    2015-01-01

    This study focused on the key factors affecting the tensile strength of cold recycled asphalt mixture with cement and emulsified asphalt. The specific surface areas and strength of RAP were analyzed. The interaction between the emulsified asphalt and cement was observed. Comprehensive laboratory testing was conducted to evaluate the influences of RAP, emulsified asphalt, and cement on the tensile strength of cold recycled asphalt mixture. It is found that although RAP is used as aggregates, i...

  5. USE OF RECLAIMED ASPHALT PAVEMENT WITH MILLED ROAD PAVEMENT LAYERS

    OpenAIRE

    Andrzej Plewa; Marta Wasilewska; Władysław Gardziejczyk; Paweł Gierasimiuk

    2015-01-01

    The article presents the results of research on the functional properties of asphalt mixes using RAP obtained from milling asphalt road pavements. Asphalt concrete AC 22P with 0%, 10%, 15% and 20% addition of RAP used for base course of road pavements were designed. It was found that asphalt mixes with RAP characterized by comparable and in some cases better functional properties compared to the asphalt mixes without RAP (0%). One should notice the influence of RAP on the performance and ...

  6. Fatigue behavior of asphalt mixtures colombian with addition recycled pavement asphalt to 100 %

    Directory of Open Access Journals (Sweden)

    Neidy Betssey Patiño Boyacá

    2015-01-01

    Full Text Available This research was conducted in order to establish the fatigue behavior of asphalt mixtures with gradations MD20 Instituto de Desarrollo Urbano (IDU and MDC 2 of The Instituto Nacional de Vías (INVIAS, with addition of recycled granular flexible pavement (RAP with asphalt of penetration 60/70 and 80/100. The first step was to characterize the asphalt and RAP as well as calculate the optimum percentage of asphalt to be added to 100 % RAP mixtures. Then samples were fabricated with different trapezoidal gradations and asphalt, to be tested finally fatigue at different deformations. Among the results found, it was determined that the tested mixtures have a high stiffness; although, it varies depending on the asphalt mix used and that the best fatigue life with respect to those studied is the MDC-2 with bitumen 80/100.

  7. Behaviour of asphalt rubber mixtures with different crumb rubber and asphalt binder sources

    OpenAIRE

    Fontes, Liseane P. T. L.; Pereira, Paulo A. A.; Pais, Jorge C.; Trichês, Glicério

    2006-01-01

    This study evaluates the performance in laboratory of gap graded mixture prepared with different crumb rubber types and different conventional grade asphalt binders. The asphalt rubbers were prepared via wet process (continuous blend) and their properties were measured through the current tests: (i) penetration;(ii) softening point: (iii) resilience; (iv) apparent viscosity using a Brookfield viscometer. The rheological properties for conventional asphalts were measured too, in order to evalu...

  8. Physical properties of asphalt rubber after being mixed with reclaimed asphalt mixes

    OpenAIRE

    Pais, Jorge C.; Pereira, Paulo A. A.; Junior, J.; Gardete, Dinis

    2008-01-01

    Recycling of road pavements became an effective technique after the European legislation defined the amount of reclaimed material that could be sent to landfills. This rehabilitation technique allows the re-use of old pavement material and favours the reduction of the amount of new materials used to produce new pavement layers. One of the most promising pavement rehabilitation techniques uses asphalt rubber mixtures, i.e. asphalt mixtures in which the binder is asphalt modified by crumb r...

  9. Investigating In Situ Properties of Recycled Asphalt Pavement with Foamed Asphalt as Base Stabilizer

    OpenAIRE

    Antonis Kaltsounis; Vasilis Papavasiliou; Andreas Loizos; Christina Plati

    2010-01-01

    The objective of the present study was to conduct a comprehensive field experiment for the in situ assessment of in-depth recycled asphalt pavement using foamed asphalt as a stabilization treatment for base works. For this purpose Nondestructive Testing (NDT) data collected using the Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR) along a foamed asphalt recycled pavement section was thoroughly analysed. Critical issues including the stabilized material curing and the con...

  10. Using Pyrolized Carbon Black (PCB) from Waste Tires in Asphalt Pavement (Part 2, Asphalt Binder)

    OpenAIRE

    Zeng, Yongdong; Lovell, C. W.

    1996-01-01

    Scrap tires derived from automobiles have become a large environmental problem in the United States. In this study, research is carried out to investigate the potential use of tire-derived pyrolyzed carbon black from scrap tires as an asphalt cement modifier. The asphalt cements used in this research were AC10 and AC20. Penetration and softening point tests were performed to obtain the consistency of the asphalt cements. The pyrolyzed carbon black, as provided by Wolf Industries, was comb...

  11. Change in fatigue behavior of asphalt hot mixes produced with asphalt rubber binders

    OpenAIRE

    Neto, Silvrano Adonias Dantas; Farias, Farias, Márcio Muniz de; Pais, Jorge C.

    2009-01-01

    Fatigue life of asphalt hot mixes is given as a function of both stiffness and tensilestrains induced in the bottom of the wearing courses of flexible pavements. In conventional as-phalt hot mixes the increase of stiffness leads to a decrease of fatigue life. However, this work shows that there is an increase of both fatigue life and stiffness of asphalt rubber hot mixes in comparison with the asphalt hot mixes produced with straight binders. In this work laboratory tests were performed in as...

  12. On the Asphalt Mixture Ratio Design

    Institute of Scientific and Technical Information of China (English)

    谢文怡

    2013-01-01

      热拌沥青混合料配合比设计关系到沥青砼路面的路用性能。本文结合高速公路沥青路面建设的实际情况,对如何规范操作,以及设计沥青混合料配合比时注意的问题提出了一些建议。%Hot-mix asphalt mixture design is related to the performance of asphalt concrete pavement. This paper, combining with the actual situation of the highway asphalt pavement construction, made recommendations on how to regulate the operation and the problems need pay attention to in design of asphalt mixture.

  13. Method of reprocessing radioactive asphalt solidification products

    International Nuclear Information System (INIS)

    Purpose: To obtain heat-stable solidification products and decrease the total volume thereof by modifying the solidified form by the reprocessing of existent radioactive asphalt solidification products. Method: Radioactive asphalt solidification products are heated into a fluidized state. Then, incombustible solvents such as perchloroethylene or trichloroethylene are added to a dissolving tank to gradually dissolve the radioactive asphalt solidification products. Thus, organic materials such as asphalts are transferred into the solvent layer, while inorganic materials containing radioactive materials remain as they are in the separation tank. Then, the inorganic materials containing the radioactive materials are taken out and then solidified, for example, by converting them into a rock or glass form. (Kawakami, Y.)

  14. Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling

    Science.gov (United States)

    Safaei, Farinaz; Castorena, Cassie; Kim, Y. Richard

    2016-04-01

    Fatigue cracking is a major form of distress in asphalt pavements. Asphalt binder is the weakest asphalt concrete constituent and, thus, plays a critical role in determining the fatigue resistance of pavements. Therefore, the ability to characterize and model the inherent fatigue performance of an asphalt binder is a necessary first step to design mixtures and pavements that are not susceptible to premature fatigue failure. The simplified viscoelastic continuum damage (S-VECD) model has been used successfully by researchers to predict the damage evolution in asphalt mixtures for various traffic and climatic conditions using limited uniaxial test data. In this study, the S-VECD model, developed for asphalt mixtures, is adapted for asphalt binders tested under cyclic torsion in a dynamic shear rheometer. Derivation of the model framework is presented. The model is verified by producing damage characteristic curves that are both temperature- and loading history-independent based on time sweep tests, given that the effects of plasticity and adhesion loss on the material behavior are minimal. The applicability of the S-VECD model to the accelerated loading that is inherent of the linear amplitude sweep test is demonstrated, which reveals reasonable performance predictions, but with some loss in accuracy compared to time sweep tests due to the confounding effects of nonlinearity imposed by the high strain amplitudes included in the test. The asphalt binder S-VECD model is validated through comparisons to asphalt mixture S-VECD model results derived from cyclic direct tension tests and Accelerated Loading Facility performance tests. The results demonstrate good agreement between the asphalt binder and mixture test results and pavement performance, indicating that the developed model framework is able to capture the asphalt binder's contribution to mixture fatigue and pavement fatigue cracking performance.

  15. Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling

    Science.gov (United States)

    Safaei, Farinaz; Castorena, Cassie; Kim, Y. Richard

    2016-08-01

    Fatigue cracking is a major form of distress in asphalt pavements. Asphalt binder is the weakest asphalt concrete constituent and, thus, plays a critical role in determining the fatigue resistance of pavements. Therefore, the ability to characterize and model the inherent fatigue performance of an asphalt binder is a necessary first step to design mixtures and pavements that are not susceptible to premature fatigue failure. The simplified viscoelastic continuum damage (S-VECD) model has been used successfully by researchers to predict the damage evolution in asphalt mixtures for various traffic and climatic conditions using limited uniaxial test data. In this study, the S-VECD model, developed for asphalt mixtures, is adapted for asphalt binders tested under cyclic torsion in a dynamic shear rheometer. Derivation of the model framework is presented. The model is verified by producing damage characteristic curves that are both temperature- and loading history-independent based on time sweep tests, given that the effects of plasticity and adhesion loss on the material behavior are minimal. The applicability of the S-VECD model to the accelerated loading that is inherent of the linear amplitude sweep test is demonstrated, which reveals reasonable performance predictions, but with some loss in accuracy compared to time sweep tests due to the confounding effects of nonlinearity imposed by the high strain amplitudes included in the test. The asphalt binder S-VECD model is validated through comparisons to asphalt mixture S-VECD model results derived from cyclic direct tension tests and Accelerated Loading Facility performance tests. The results demonstrate good agreement between the asphalt binder and mixture test results and pavement performance, indicating that the developed model framework is able to capture the asphalt binder's contribution to mixture fatigue and pavement fatigue cracking performance.

  16. ALGORITHM OF CHOOSING ASPHALT MIXING PLANTS

    OpenAIRE

    Zhukov, P.; Kravchuk, Y.; Zhukov, D.

    2010-01-01

    The development of transport infrastructure, which must conform to European standards and in its turn requires the development of road economy, is one of the ways out of the crisis. The development of road economy requires either construction of asphalt-concrete mixture plants or their modernization, or reconstruction of existing plants. Any reconstruction or modernization and, moreover, construction of new asphalt-concrete plants requires the optimization of choosing the most efficient aspha...

  17. Performance Characteristics of Silane Silica Modified Asphalt

    OpenAIRE

    Xuedong Guo; Mingzhi Sun; Wenting Dai; Shuang Chen

    2016-01-01

    At present there are many kinds of fillers and modifier used for modified asphalt, but the effect of modifier differs in thousands of ways; most of them can increase the high temperature performance of asphalt, but the modified effect of low-temperature crack resistance, water stability, and antifatigue performance is different. Aiming at the subsistent problems, this paper innovatively puts forward the idea of taking the silane silica (nanosilica modified with silane coupling agent) as fille...

  18. Safety evaluation of asphalt products, (1)

    International Nuclear Information System (INIS)

    The safety of activity-containing asphalt products kept in enclosed storage was evaluated from considerations of radiolysis and hydrogen evolution. The samples examined were mainly homogeneous asphalt products containing 43w/0 of sludge produced in routine operation of the asphalt plant at the Japan Atomic Energy Research Institute (JAERI), the samples were irradiated with external 60Co γ-ray source to a dose of 109 R. The bulk of the gases evolving from the asphalt product is hydrogen, which constitutes 75 -- 95% of the total gas evolution. The total amount of gases generated during infinite time is proportional to the total exposure dose; hydrogen evolves at a rate of 5.5x10-3 cm3/g.MR. The amount of total gas evolution is governed solely by the quantity of asphalt, and is independent of the sludge contained therein. Nor do differences in the rate of dose appear to have any significant effect. In so far as concerns smallness of radiolysis, slightly better performance can be expected from straight than from blown asphalt. There is no danger of explosion of the asphalt products currently generated at JAERI (10-5 Ci/kg), which can be expected to accumulate in infinite time no more than about 3 cm3 from a 200 l product. Only asphalt products containing activity in concentrations exceeding 10-1 Ci/kg risk explosion when kept in enclosed storage, through accumulation of hydrogen in quantity exceeding the explosion limit in a relatively short time. (auth.)

  19. Asphalt mixtures produced with 100% reclaimed materials

    OpenAIRE

    Oliveira, Joel; Silva, Hugo Manuel Ribeiro Dias da; Jesus, Carlos M. G.

    2011-01-01

    The environmental and economic benefits of using Reclaimed Asphalt Pavement (RAP) material in hot mix asphalt (HMA) applications could be pushed up to the limit, by producing totally recycled HMAs (100% RAP), but the performance of this alternative must be satisfactory. In fact, these mixtures could possibly present a lower performance due to the behaviour of the aged binder, which loses its lighter fractions with time. In order to improve the mixture properties, a binder rejuvenator should b...

  20. Rapid determination of actinides in asphalt samples

    International Nuclear Information System (INIS)

    A new rapid method for the determination of actinides in asphalt samples has been developed that can be used in emergency response situations or for routine analysis. If a radiological dispersive device, improvised nuclear device or a nuclear accident such as the accident at the Fukushima Nuclear Power Plant in March, 2011 occurs, there will be an urgent need for rapid analyses of many different environmental matrices, including asphalt materials, to support dose mitigation and environmental clean-up. The new method for the determination of actinides in asphalt utilizes a rapid furnace step to destroy bitumen and organics present in the asphalt and sodium hydroxide fusion to digest the remaining sample. Sample preconcentration steps are used to collect the actinides and a new stacked TRU Resin + DGA Resin column method is employed to separate the actinide isotopes in the asphalt samples. The TRU Resin plus DGA Resin separation approach, which allows sequential separation of plutonium, uranium, americium and curium isotopes in asphalt samples, can be applied to soil samples as well. (author)

  1. Rheological properties of asphalts with particulate additives

    Energy Technology Data Exchange (ETDEWEB)

    Shashidhar, N. [EBA Engineering, Baltimore, MD (United States); Chollar, B.H. [Federal Highway Administration, McLean, VA (United States)

    1996-12-31

    The Superpave asphalt binder specifications are performance-based specifications for purchasing asphalt binders for the construction of roads. This means that the asphalt is characterized by fundamental material (rheological) properties that relate to the distress modes of the pavements. The distress modes addressed are primarily rutting, fatigue cracking and low temperature cracking. For example, G*/sin({delta}) is designed to predict the rutting potential of pavements, where G* is the magnitude of the complex shear modulus and 6 is the phase angle. The binder for a road that is situated in a certain climatic zone requires the binder to have a minimum G*/sin({delta}) of 2200 Pa at the highest consecutive 7-day average pavement temperature the road had experienced. Implicit in such a performance based specification is that the fundamental property, G*/sin({delta}), of the binder correlates with rutting potential of the pavement regardless of the nature of the binder. In other words, the specification is transparent to the fact that the binder can simply be an asphalt, or an asphalt modified by polymers, particulates and other materials that can form a two-phase mixture. This paper discusses the asphalt-particulate system.

  2. Study on Producing Heavy Paving Asphalt

    Institute of Scientific and Technical Information of China (English)

    Liu Daosheng; Gao Zhirong; Huo Kaifu; Liao Kejian

    2002-01-01

    The highly viscous crude oil from Shuguang No. 1 zone of Liaohe oilfield features high density,high viscosity and low wax content. It contains no gasoline fraction and its diesel oil fraction yield is only 7.19%, which belongs to the low sulfur naphthenic stocks crude oil. Its heavy fraction is not suited for producing lubricating oil. Its heavy oil, which contains more resins and asphaltenes and less wax, is not an ideal feedstock for catalytic cracking, but is the ideal raw material for producing high-grade paving asphalt.Now this highly viscous crude oil is used as fuel oil after being emulsified in Liaohe oilfield, but its viscosity is so high that it cannot be atomized uniformly and burned completely, resulting not only in waste of oil resource but also in reduction of economical benefit. To make full use of this oil resource and alleviate the shortfall of high grade paving asphalt in China, various brands of asphalt meeting Q/SHR003-1998and ESSO specifications were developed by blending vacuum residue of the said oil and a blending component which are rich in aromatics and deficient in wax. The impact of blending component on properties of blended asphalt has been investigated and road performances of these blended asphalts were studied. The laboratory test results show that the blended asphalts have good road performance and antiaging property.

  3. Asphalt wear and pollution transport

    Energy Technology Data Exchange (ETDEWEB)

    Lindgren, Asa [Division of Traffic Engineering, Lulea University of Technology Lulea (Sweden)

    1996-09-06

    Studded tires cause extensive wear of road surfaces during winter producing small particles. Besides transporting different adsorbed pollutants these particles also discharge metal ions by their own natural content. The major part (95%) of the asphalt is composed of stone fractions. The rest consists mainly of bitumen, which contains trace quantities of metals. Laboratory studies in this study have demonstrated different adsorbing properties of metal ions, as well as differences in adsorption when comparing stone materials. Two stone materials, a gabbro and a porphyry, have been tested for their adsorption properties concerning Pb, Cu, Zn and Cd. The gabbro showed better adsorption capacity than the porphyry. Gabbro has coarser grains, it is softer, and also has a higher content of most metals compared to the porphyry. In all tests lead and copper are more adsorbed than zinc and cadmium. All metal ions are released at about the same pH ({approx}4)

  4. Effects of reclaimed asphalt pavement on indirect tensile strength test of conditioned foamed asphalt mix

    International Nuclear Information System (INIS)

    This paper presents the results of Indirect Tensile Strength (ITS) Test for samples prepared with reclaimed asphalt pavement (RAP). Samples were conditioned in water at 25°C for 24 hours prior to testing. Results show that recycled aggregate from reclaimed asphalt pavement performs as well as virgin aggregate.

  5. Effects of reclaimed asphalt pavement on indirect tensile strength test of conditioned foamed asphalt mix

    Science.gov (United States)

    Yati Katman, Herda; Rasdan Ibrahim, Mohd; Yazip Matori, Mohd; Norhisham, Shuhairy; Ismail, Norlela

    2013-06-01

    This paper presents the results of Indirect Tensile Strength (ITS) Test for samples prepared with reclaimed asphalt pavement (RAP). Samples were conditioned in water at 25°C for 24 hours prior to testing. Results show that recycled aggregate from reclaimed asphalt pavement performs as well as virgin aggregate.

  6. Asphalte

    OpenAIRE

    Foley, S.

    1987-01-01

    The Burnett Archive of Working Class Autobiographies was gathered together by John Burnett, David Vincent and David Mayall whilst compiling their three volumes annotated bibliography, "The Autobiography of the Working Class" (Harvester Press, 1984-1989). This book includes descriptions of unpublished autobiographies and indicates their locations. Excerpts from some of the autobiographies have been published in "Destiny obscure: autobiographies of childhood, education, and family from the1820s...

  7. Experimental studies of biodegradation of asphalt by microorganisms

    International Nuclear Information System (INIS)

    On the geological disposal system of the radioactive wastes, the activities of the microorganisms that could degrade the asphalt might be significant for the assessment of the system performance. As the main effects of the biodegradation of the asphalt, the fluctuation of leaching behavior of the nuclides included in asphalt waste has been indicated. In this study, the asphalt biodegradation test was carried out. The microorganism of which asphalt degradation ability was comparatively higher under aerobic condition and anaerobic condition was used. The asphalt biodegradation rate was calculated and it was evaluated whether the asphalt biodegradation in this system could occur. The results show that the asphalt biodegradation rate under anaerobic and high alkali condition will be 300 times lower than under aerobic and neutral pH. (author)

  8. COLOR ASPHALT CONCRETE COATING ON POLIMER-TAR BINDER

    OpenAIRE

    Zolotarev, V.; Golovenchic, S.; Oksak, S.; S. Efremov

    2005-01-01

    The possibility of receiving of color asphalt concrete on polimer-tar binder is found. Principal moments of production technology of coloured mixtures and device of asphalt concrete coating have been revealed.

  9. Theoretic computing model of combustion process of asphalt smoke

    Institute of Scientific and Technical Information of China (English)

    HUANG Rui; CHAI Li-yuan; HE De-wen; PENG Bing; WANG Yun-yan

    2005-01-01

    Based on the data and methods provided by research literature, dispersing mathematical model of combustion process of asphalt smoke is set by theoretic analysis. Through computer programming, the dynamic combustion process of asphalt smoke is calculated to simulate an experimental model. The computing result shows that the temperature and the concentration of asphalt smoke influence its burning temperature in approximatively linear manner. The consumed quantity of fuel to ignite the asphalt smoke needs to be measured from the two factors.

  10. Effects of preparation process on performance of rubber modified asphalt

    Science.gov (United States)

    Liu, Hanbing; Luo, Guobao; Wang, Xianqiang; Jiao, Yubo

    2015-06-01

    The rational utilization of waste rubber tire is essential for the environmental protection. Utilizing rubber particles to modify asphalt can not only improve asphalt performance, but also help the recycling of waste materials. Considering the effect of different preparation process parameters on the performance of rubber modified asphalt, this paper analyzes the effects of the shear temperature, shear time and shear rate on the performance of rubber modified asphalt, and provided a reference for its preparation.

  11. Reinforcing Effects of Carbon Black on Asphalt Binder for Pavement

    OpenAIRE

    Yamaguchi, Katsuyuki; Sasaki, Iwao; Nishizaki, Itaru; Meiarashi, Seishi; Moriyoshi, Akihiro

    2005-01-01

    Carbon black, used as a reinforcing filler for rubber materials, was evaluated for asphalt binders in pavements. Carbon black added to straight asphalt within 20 wt% caused an increase in the elastic modulus and a decrease in the viscosity of the asphalt, especially at temperatures higher than room temperature. Addition of carbon black raised the maximum service temperature of asphalt in the category of the binder performance grade according to the SHRP (Strategic Highway Research Program) sp...

  12. Influence of crumb rubber gradation on asphalt-rubber properties

    OpenAIRE

    Neto, Silvrano Adonias Dantas; Farias, Márcio Muniz de; Pais, Jorge C.; Pereira, Paulo A. A.

    2006-01-01

    Asphalt rubber is a material produced by the incorporation of crumb rubber obtained from ground tires in straight asphalt and its properties are influenced by the components properties. The crumb rubber gradation is one of the variables which have a significant influence on asphalt rubber properties. Thus, this work studies the influence of crumb rubber gradation on the asphalt rubber properties expressed by penetration, rotational viscosity (using the Brookfield viscometer), r...

  13. Surface roughness of an asphalt concrete and its mechanical behavior

    OpenAIRE

    MOMM, L; DE LA ROCHE, C; Domingues, A.

    2003-01-01

    The surface roughness of asphalt concrete is studied according to the maximum aggregate size and to the equation of the aggregate graduation curve, on asphalt concrete plates made in laboratory. The macrotexture increases when the maximum aggregate size increases and it decreases when the aggregate fine contents increases. The asphalt concrete structural behaviour is evaluated with rutting, complex modulus and fatigue tests. The study shows stronger mechanical performances on the asphalt conc...

  14. Biodegradation of Asphalt Cement-20 by Aerobic Bacteria

    OpenAIRE

    Pendrys, John P.

    1989-01-01

    Seven gram-negative, aerobic bacteria were isolated from a mixed culture enriched for asphalt-degrading bacteria. The predominant genera of these isolates were Pseudomonas, Acinetobacter, Alcaligenes, Flavimonas, and Flavobacterium. The mixed culture preferentially degraded the saturate and naphthene aromatic fractions of asphalt cement-20. A residue remained on the surface which was resistant to biodegradation and protected the underlying asphalt from biodegradation. The most potent asphalt-...

  15. Modification of Asphalt by the Use of Crumb Rubber

    OpenAIRE

    Shah Room; Muhammad Aleem; Muhammad Ahmad Rana; Umair Anwar Awan; Sajjad Ali

    2014-01-01

    Health aspects enforced to ponder a study on asphalt which incorporate rubber crumbs to increase strength and flexibility of asphalt. Disposal of waste tires is a menace and it’s a serious problem globally because it is not easily biodegradable as these tires consume large spaces, open burning cause serious problems. By the use of rubber tires, this scrap is utilized efficiently and reduces the cost of asphalt to produce economical system. The asphalt is absorbed by the rubber par...

  16. Laboratory mix design of asphalt mixture containing reclaimed material

    OpenAIRE

    Davide Lo Presti; Rawid Khan; Norhidayah Abdul Hassan; Gordon Airey; Andrew Collop

    2014-01-01

    This paper presents a study on the production of asphalt test specimens in the laboratory containing reclaimed asphalt. The mixtures considered were stone mastic asphalt concrete mixtures containing up to 30% of reclaimed asphalt. Specimens were compacted to the reference density obtained from the Marshall mix design. Gyration compaction method was used for preparing specimens for the experimental programme, while coring and cutting methods and X-ray computed tomography (CT) were used to inve...

  17. Full-Depth Asphalt Pavements for Parking Lots and Driveways.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The latest information for designing full-depth asphalt pavements for parking lots and driveways is covered in relationship to the continued increase in vehicle registration. It is based on The Asphalt Institute's Thickness Design Manual, Series No. 1 (MS-1), Seventh Edition, which covers all aspects of asphalt pavement thickness design in detail,…

  18. 40 CFR 52.2054 - Control of asphalt paving material.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Control of asphalt paving material. 52... asphalt paving material. (a) Notwithstanding any provisions to the contrary in the Pennsylvania Implementation Plan, the Pennsylvania Department of Transportation shall restrict the annual usage of asphalts...

  19. Multiscale Constitutive Modeling of Asphalt Concrete

    Science.gov (United States)

    Underwood, Benjamin Shane

    Multiscale modeling of asphalt concrete has become a popular technique for gaining improved insight into the physical mechanisms that affect the material's behavior and ultimately its performance. This type of modeling considers asphalt concrete, not as a homogeneous mass, but rather as an assemblage of materials at different characteristic length scales. For proper modeling these characteristic scales should be functionally definable and should have known properties. Thus far, research in this area has not focused significant attention on functionally defining what the characteristic scales within asphalt concrete should be. Instead, many have made assumptions on the characteristic scales and even the characteristic behaviors of these scales with little to no support. This research addresses these shortcomings by directly evaluating the microstructure of the material and uses these results to create materials of different characteristic length scales as they exist within the asphalt concrete mixture. The objectives of this work are to; 1) develop mechanistic models for the linear viscoelastic (LVE) and damage behaviors in asphalt concrete at different length scales and 2) develop a mechanistic, mechanistic/empirical, or phenomenological formulation to link the different length scales into a model capable of predicting the effects of microstructural changes on the linear viscoelastic behaviors of asphalt concrete mixture, e.g., a microstructure association model for asphalt concrete mixture. Through the microstructural study it is found that asphalt concrete mixture can be considered as a build-up of three different phases; asphalt mastic, fine aggregate matrix (FAM), and finally the coarse aggregate particles. The asphalt mastic is found to exist as a homogenous material throughout the mixture and FAM, and the filler content within this material is consistent with the volumetric averaged concentration, which can be calculated from the job mix formula. It is also

  20. Design and Performance of Hot Mix Asphalts with High Percentages of Reclaimed Asphalt: Approach followed in the Paramix Project

    OpenAIRE

    Pérez, F; Rodriguez, M.; De Visscher, J.; Vanelstraete, A.; Bock, L.

    2004-01-01

    The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical savings, while reducing the negative environmental impact. The European research project PARAMIX aims to improve the techniques for hot mix recycling in plant and cold mix in situ recycling, so as to increase the amount of reclaimed asphalt and develop competitive road pavement rehabilitation techniques. This paper deals with the design of hot mix asphalts for the project. The di...

  1. Analysing polystyrene-modified asphalt and its incidence in a heat-dense asphalt mixture

    Directory of Open Access Journals (Sweden)

    Ana Sofía Figueroa Infante

    2010-04-01

    Full Text Available This article presents some results obtained with an MDC-2 asphalt/polystyrene-modified asphalt mixture as a result of crushing waste glass. The stone, asphalt and polystyrene materials’ were characterised for drawing up the design. The Marshal method was used for obtaining the best asphalt- stone-polystyrene percentages. The Superpave method was used for analysing the asphalt; the mixture’s dynamic behaviour was analysed using a test involving 20ºC and 30ºC trapezoidal fatigue for 90x10-6, 150x10-6 and 220x10-6m deformation. The truck-wheel test was analysed for a 13-ton load, similar to that of the heaviest axle on a Transmilenio (articulated bus. The dynamic module test was analysed for 15ºC, 20ºC and 30ºC and 2.5, 5 and 10 Hz frequencies. Conventional asphalt mixture and modified asphalt results were contrasted, interesting behaviour being observed regarding plastic deformation of the modified mixture in service

  2. Mechanical Response Analysis of Asphalt Pavement Structure

    Directory of Open Access Journals (Sweden)

    Yu Zhenqing

    2015-11-01

    Full Text Available Generally, the Chinese designed life of the high- grade asphalt concrete pavement is required 15 years, however, the designed life of the road in surface is often lower than the designed life, and even premature failure. Especially in heavy traffic conditions, the early damage of some high grade-asphalt pavement in China is serious. According to some investigations, we founded the main reason of the long-life asphalt pavement is to determine the function of each structure layer. According to the stress of pavement structure layer, so as to select the structure layer materials. Based on the viewpoint of mechanics, asphalt pavement damage mode is divided into three categories, such as top-down crack, fatigue cracking and rutting. Therefore, this paper uses ANSYS finite element software as calculation tool, the combination of road vehicle load and the primary influence on asphalt pavement structure mechanics response characteristics were analyzed. In this paper, the method of analysis is control variable: that means under different vehicle axle load, only change surface layer modulus and observe the pavement structure mechanical response trends to compare the effect. By using the same method, the response of the pavement base course parameters to the pavement mechanical structure is analyzed.

  3. High Modulus Asphalt Concrete with Dolomite Aggregates

    Science.gov (United States)

    Haritonovs, V.; Tihonovs, J.; Smirnovs, J.

    2015-11-01

    Dolomite is one of the most widely available sedimentary rocks in the territory of Latvia. Dolomite quarries contain about 1,000 million tons of this material. However, according to Latvian Road Specifications, this dolomite cannot be used for average and high intensity roads because of its low quality, mainly, its LA index (The Los Angeles abrasion test). Therefore, mostly the imported magmatic rocks (granite, diabase, gabbro, basalt) or imported dolomite are used, which makes asphalt expensive. However, practical experience shows that even with these high quality materials roads exhibit rutting, fatigue, and thermal cracks. The aim of the research is to develop a high performance asphalt concrete for base and binder courses using only locally available aggregates. In order to achieve resistance against deformations at a high ambient temperature, a hard grade binder was used. Workability, fatigue and thermal cracking resistance, as well as sufficient water resistance is achieved by low porosity (3-5%) and higher binder content compared to traditional asphalt mixtures. The design of the asphalt includes a combination of empirical and performance based tests, which in laboratory circumstances allow simulating traffic and environmental loads. High performance AC 16 base asphalt concrete was created using local dolomite aggregate with polymer modified (PMB 10/40-65) and hard grade (B20/30) bitumen. The mixtures were specified based on fundamental properties in accordance with EN 13108-1 standard.

  4. Current practices for modification of paving asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Bahia, H.U.; Perdomo, D. [Asphalt Institute, Lexington, KY (United States)

    1996-12-31

    The Superpave binder specification, AASHTO MP1, has introduced new concepts for selecting paving asphalt binders. The specification, in addition to using rheological and failure measurements that are more related to performance, is based on the idea that the criteria to maintain a satisfactory contribution of asphalt binders to the resistance of pavement failures remains the same but have to be satisfied at critical application temperatures. The test procedures require that the material be characterized within certain ranges of strains or stresses to ensure that material and geometric non-linearities are not confounded in the measurements. These new specification concepts have resulted in re-evaluation of asphalt modification by the majority of modified asphalt suppliers. The philosophy of asphalt modification is expected to change, following these new concepts, from a general improvement of quality to more focus on using modifiers based on the most critical need as defined by two factors: (1) The application temperature domain and (2) the type of distress to be remedied. The new specification requirements should result in a more effective use of modifiers as the amount and type of modifier will be directly related to the application environment and the engineering requirements.

  5. Ethanol based foamed asphalt as potential alternative for low emission asphalt technology

    Directory of Open Access Journals (Sweden)

    Mohd Rosli Mohd Hasan

    2016-04-01

    Full Text Available Foamed asphalt typically relies on water as a foaming agent because water becomes gaseous at elevated temperatures, generating numerous tiny bubbles in the asphalt and causing spontaneous foaming. In this study, ethanol was used as a potential alternative to water as a foaming agent. Ethanol is expected to be a physical blowing agent in the same manner as water, except it requires less energy to foam due to its 78 °C boiling point. This study compares the performance of water and ethanol as foaming agents through the measurements of rotational viscosity, the reduction in temperature during foaming, and volatile loss. The ethanol-foamed asphalt binders were prepared at 80 °C and 100 °C, while the water-foamed asphalt binders were prepared at 100 °C and 120 °C. Additionally, the rolling thin film oven (RTFO was used to generate short-term aging of the foamed asphalt binders. A rotational viscometer was used to determine the viscosity of the asphalt binders at 80 °C, 100 °C, 120 °C, 140 °C, and 160 °C. Overall, ethanol can function in the same manner as water but requires less energy to foam. It is proven based on the smaller drop in temperature of the asphalt binder foamed using ethanol compared with that prepared with water. This is due to the lower latent heat capacity of ethanol, which requires less energy to vaporize compared with water. Through the rotational viscometer test, ethanol performs better in lowering the viscosity of asphalt binders, which is essential in allowing production processes at low temperatures, as well as a better workability and aggregate coating. Ethanol can be expelled from the foamed asphalt binders at a higher rate due to its lower boiling point and latent heat.

  6. Research on Alkaline Filler Flame-Retarded Asphalt Pavement

    Institute of Scientific and Technical Information of China (English)

    HU Shuguang; ZHANG Houji; WANG Jiaolan

    2006-01-01

    Used as flame retardant of tunnel asphalt pavement, organic bromides produce a large amount of poisons and smoke in construction and flame retardation stage. The alkaline filler was found to replace mineral filler, and the flame-retarded asphalt mixtures were produced. Experimental results show that these asphalt mixtures are smoke restrained; the performances and construction technology of asphalt pavement are not influenced; also the alkaline filler is of low-price. So this kind of flame-retarded asphalt mixtures is suitable for tunnel pavement.

  7. Pitch-asphalts - new binder for road construction

    Energy Technology Data Exchange (ETDEWEB)

    Stompel, Z.; Collin, G.; Szen, A.; Herion, G.

    1988-01-01

    Discusses chemical and physical properties of a mixture of pitches and asphalts produced by the Blachownia Chemical Plant. The mixture consists of coal tar pitches with 25.7% content of toluene-insoluble fractions, anthracene oil and Dex asphalt. The following properties were analyzed: density, softening and softening point, adhesion, viscosity, sedimentation after 14 days. Physical and chemical properties of the pitch-asphalt from Blachownia were compared to those of pitch-asphalt from Ruetgerswerke AG in the FRG. Pitch-asphalt properties were evaluated from the point of view of their use in road construction. 8 refs.

  8. Simulation of rheological behavior of asphalt mixture with lattice model

    Institute of Scientific and Technical Information of China (English)

    杨圣枫; 杨新华; 陈传尧

    2008-01-01

    A three-dimensional(3D) lattice model for predicting the rheological behavior of asphalt mixtures was presented.In this model asphalt mixtures were described as a two-phase composite material consisting of asphalt sand and coarse aggregates distributed randomly.Asphalt sand was regarded as a viscoelastic material and aggregates as an elastic material.The rheological response of asphalt mixture subjected to different constant stresses was simulated.The calibrated overall creep strain shows a good approximation to experimental results.

  9. Application of retardation time spectra of asphalt

    Institute of Scientific and Technical Information of China (English)

    ZHAN Xiao-li; ZHANG Xiao-ning; LU Liang

    2008-01-01

    To improve the performance of asphah pavement,the dynamic and static tests of asphalt were used to measure its viscoelastic properties under different time.Based on the obtained data of static creep compliances and dynamic compliances according to the static creep test and dynamic test of asphalt using the dynamic shear rheometer,the discrete retardation time spectra were attained using the non-linear regression method.All viseoelastic functions are mathematically equivalent and belong to the same retardation time spectra,so the dynamic compliances of asphalt were converted to the static creep compliance using the retardation time spectra.Good correlations were found betwin calculation results and measurement results.In accordalice to these findings,the retardation time spectra can accurately transform static and dynamic viscoelastic functions.Therefore,we can obtain viscoelastic properties over much larger time or frequency region than measurement results.

  10. Asphalt rubber mixtures in Portugal: fatigue resistance

    OpenAIRE

    Miranda, Henrique; Batista, Fátima; Neves, José; Antunes, Maria de Lurdes; Fonseca, Paulo

    2009-01-01

    This paper presents a study concerning the fatigue behaviour of asphalt mixtures with bitumen modified with high content of crumb rubber used in Portugal. For assessing the fatigue behaviour of this type of mixtures, four asphalt mixtures with high content of crumb rubber were used: two field bituminous mixtures – an open-graded and a gap-graded – both with granite aggregates; and two laboratory manufactured bituminous mixtures – an open-graded mixture with granite aggregates and a gap-graded...

  11. Investigating In Situ Properties of Recycled Asphalt Pavement with Foamed Asphalt as Base Stabilizer

    Directory of Open Access Journals (Sweden)

    Christina Plati

    2010-01-01

    Full Text Available The objective of the present study was to conduct a comprehensive field experiment for the in situ assessment of in-depth recycled asphalt pavement using foamed asphalt as a stabilization treatment for base works. For this purpose Nondestructive Testing (NDT data collected using the Falling Weight Deflectometer (FWD and Ground Penetrating Radar (GPR along a foamed asphalt recycled pavement section was thoroughly analysed. Critical issues including the stabilized material curing and the contribution of the asphalt layers to the structural properties of the in-depth recycled pavement are discussed. In addition, recommendations concerning the improvement of the structural condition of the in-depth recycled pavement are developed based on this practical approach of investigation using NDT.

  12. Performance Evaluation of Stone Mastic Asphalt and Hot Mix Asphalt Mixtures Containing Recycled Concrete Aggregate

    Directory of Open Access Journals (Sweden)

    Mohammad Saeed Pourtahmasb

    2014-01-01

    Full Text Available Environmental and economic considerations have encouraged civil engineers to find ways to reuse recycled materials in new constructions. The current paper presents an experimental research on the possibility of utilizing recycled concrete aggregates (RCA in stone mastic asphalt (SMA and hot mix asphalt (HMA mixtures. Three categories of RCA in various percentages were mixed with virgin granite aggregates to produce SMA and HMA specimens. The obtained results indicated that, regardless of the RCA particular sizes, the use of RCA to replace virgin aggregates increased the needed binder content in the asphalt mixtures. Moreover, it was found that even though the volumetric and mechanical properties of the asphalt mixtures are highly affected by the sizes and percentages of the RCA but, based on the demands of the project and traffic volume, utilizing specific amounts of RCA in both types of mixtures could easily satisfy the standard requirements.

  13. Comparison of laboratory test performance between asphalt-rubber hot mix and dense graded asphalt concrete

    OpenAIRE

    Sousa, Jorge B.; Pais, Jorge C.; Stubstad, Richard N.

    2000-01-01

    "Reflective cracking in pavements : research in practice" contains the Proceedings of the 4th International RILEM Conference on Reflective Cracking in Pavements (Proceedings PRO11). Asphalt-Rubber Hot-Mix (ARHM) has shown a higher resistance to flexural and reflective fatigue cracking, and also to permanent deformation, than conventional Dense Graded Asphalt Concrete (DGAC). Experience has demonstrated that with ARHM, a significant reduction in overlay thickness is possible, especially in...

  14. Performance Evaluation of Stone Mastic Asphalt and Hot Mix Asphalt Mixtures Containing Recycled Concrete Aggregate

    OpenAIRE

    Mohammad Saeed Pourtahmasb; Mohamed Rehan Karim

    2014-01-01

    Environmental and economic considerations have encouraged civil engineers to find ways to reuse recycled materials in new constructions. The current paper presents an experimental research on the possibility of utilizing recycled concrete aggregates (RCA) in stone mastic asphalt (SMA) and hot mix asphalt (HMA) mixtures. Three categories of RCA in various percentages were mixed with virgin granite aggregates to produce SMA and HMA specimens. The obtained results indicated that, regardless of t...

  15. Advanced methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material

    OpenAIRE

    Bressi, Sara

    2016-01-01

    Despite the massive use of Reclaimed Asphalt Pavement (RAP) in Hot Mix Asphalt (HMA) production, the chemo-physical phenomena that characterise the fabrication of these mixtures have not yet been completely explored. The detection and understanding of these mechanisms as well as the study of the heterogeneity that characterizes high RAP mix production are fundamental to improving the approach to recycling, because they represent the source of the mixture characteristics and performance. This...

  16. Evaluation of Warm Mix Asphalt Additives for Use in Modified Asphalt Mixtures

    Science.gov (United States)

    Chamoun, Zahi

    The objective of this research effort is to evaluate the use of warm-mix additives with polymer modified and terminal blend tire rubber asphalt mixtures from Nevada and California. The research completed over two stages: first stage evaluated two different WMA technologies; Sasobit and Advera, and second stage evaluated one additional WMA technology; Evotherm. The experimental program covered the evaluation of resistance of the mixtures to moisture damage, the performance characteristics of the mixtures, and mechanistic analysis of mixtures in simulated pavements. In the both stages, the mixture resistance to moisture damage was evaluated using the indirect tensile test and the dynamic modulus at multiple freeze-thaw cycles, and the resistance of the various asphalt mixtures to permanent deformation using the Asphalt Mixture Performance Tester (AMPT). Resistance of the untreated mixes to fatigue cracking using the flexural beam fatigue was only completed for the first stage. One source of aggregates was sampled in, two different batches, three warm mix asphalt technologies (Advera, Sasobit and Evotherm) and three asphalt binder types (neat, polymer-modified, and terminal blend tire rubber modified asphalt binders) typically used in Nevada and California were evaluated in this study. This thesis presents the resistance of the first stage mixtures to permanent deformation and fatigue cracking using two warm-mix additives; Advera and Sasobit, and the resistance to moisture damage and permanent deformation of the second stage mixtures with only one warm-mix additive; Evotherm.

  17. Microstructural Analysis and Rheological Modeling of Asphalt Mixtures Containing Recycled Asphalt Materials

    Directory of Open Access Journals (Sweden)

    Augusto Cannone Falchetto

    2014-09-01

    Full Text Available The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP, and, more recently, Recycled Asphalt Shingles (RAS on the performance of asphalt pavement, while limits were proposed on the amount of recycled materials which can be used. In this paper, the effect of adding RAP and RAS on the microstructural and low temperature properties of asphalt mixtures is investigated using digital image processing (DIP and modeling of rheological data obtained with the Bending Beam Rheometer (BBR. Detailed information on the internal microstructure of asphalt mixtures is acquired based on digital images of small beam specimens and numerical estimations of spatial correlation functions. It is found that RAP increases the autocorrelation length (ACL of the spatial distribution of aggregates, asphalt mastic and air voids phases, while an opposite trend is observed when RAS is included. Analogical and semi empirical models are used to back-calculate binder creep stiffness from mixture experimental data. Differences between back-calculated results and experimental data suggest limited or partial blending between new and aged binder.

  18. Asphalt modification with used lubricating oil

    Energy Technology Data Exchange (ETDEWEB)

    Villanueva, A.; Ho, S.; Zanzotto, L. [Calgary Univ., AB (Canada). Schulich School of Engineering, Bituminous Materials Research Laboratory

    2008-02-15

    A method of recycling waste lubricating oil from vehicles was presented. Various asphalt materials were modified with different amounts of lubricating oil and analyzed using standard Superpave tests. Dynamic shear rheometer (DSR) tests were then conducted to in order to obtain high temperature samples. Bending beam rheometer (BBR) and direct tension tests (DTT) were used to obtain low temperature sample profiles. Potential applications for the materials were reviewed. Environmental impacts and costs associated with using the materials were also presented. The study demonstrated that waste lubricating oil can be used as a softening agent in modified asphalt binders using a low temperature grade technique. It was concluded that the low cost of waste lubricating oil in Alberta makes it a potential resource for asphalt modification. The oil modified samples lowered the high-temperature grade and did not improve the overall quality of the asphalt. Further testing is needed to examine the quality and consistency of lubricating oils. 19 refs., 7 tabs., 12 figs.

  19. Microbial Life in a Liquid Asphalt Desert

    Science.gov (United States)

    Schulze-Makuch, Dirk; Haque, Shirin; de Sousa Antonio, Marina Resendes; Ali, Denzil; Hosein, Riad; Song, Young C.; Yang, Jinshu; Zaikova, Elena; Beckles, Denise M.; Guinan, Edward; Lehto, Harry J.; Hallam, Steven J.

    2011-04-01

    Pitch Lake in Trinidad and Tobago is a natural asphalt reservoir nourished by pitch seepage, a form of petroleum that consists of mostly asphaltines, from the surrounding oil-rich region. During upward seepage, pitch mixes with mud and gases under high pressure, and the lighter portion evaporates or is volatilized, which produces a liquid asphalt residue characterized by low water activity, recalcitrant carbon substrates, and noxious chemical compounds. An active microbial community of archaea and bacteria, many of them novel strains (particularly from the new Tar ARC groups), totaling a biomass of up to 107 cells per gram, was found to inhabit the liquid hydrocarbon matrix of Pitch Lake. Geochemical and molecular taxonomic approaches revealed diverse, novel, and deeply branching microbial lineages with the potential to mediate anaerobic hydrocarbon degradation processes in different parts of the asphalt column. In addition, we found markers for archaeal methane metabolism and specific gene sequences affiliated with facultative and obligate anaerobic sulfur- and nitrite-oxidizing bacteria. The microbial diversity at Pitch Lake was found to be unique when compared to microbial communities analyzed at other hydrocarbon-rich environments, which included Rancho Le Brea, a natural asphalt environment in California, USA, and an oil well and a mud volcano in Trinidad and Tobago, among other sites. These results open a window into the microbial ecology and biogeochemistry of recalcitrant hydrocarbon matrices and establish the site as a terrestrial analogue for modeling the biotic potential of hydrocarbon lakes such as those found on Saturn's largest moon Titan.

  20. Sulfur extended asphalt pavement evaluation: Executive summary

    Science.gov (United States)

    Mahoney, J. P.

    1982-09-01

    This summary report overviews two previously issued study reports. One report assesses The availability and pricing of sulfur with respect to sulfur extended asphalt (SEA) paving mixture is assessed. A laboratory oriented testing program which was principally used to examine the durability and aging characteristics of SEA paving mixtures is reported.

  1. Determining and Modeling Asphalt Concrete Response (ACRe)

    NARCIS (Netherlands)

    Erkens, S.M.J.G.; Poot, M.R.

    2000-01-01

    In road engineering research and design the principles of material mechanics have not yet become a standard tool. In this contribution a project aimed at applying these principles to asphalt concrete is presented. Attention is paid to the differences between the standard test procedures and those ba

  2. Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers

    Directory of Open Access Journals (Sweden)

    Byong Chol Bai

    2015-01-01

    Full Text Available This paper investigates the thermal properties of asphalt mixtures modified with conductive fillers used for snow melting and solar harvesting pavements. Two different mixing processes were adopted to mold asphalt mixtures, dry- and wet-mixing, and two conductive fillers were used in this study, graphite and carbon black. The thermal conductivity was compared to investigate the effects of asphalt mixture preparing methods, the quantity, and the distribution of conductive filler on thermal properties. The combination of conductive filler with carbon fiber in asphalt mixture was evaluated. Also, rheological properties of modified asphalt binders with conductive fillers were measured using dynamic shear rheometer and bending beam rheometer at grade-specific temperatures. Based on rheological testing, the conductive fillers improve rutting resistance and decrease thermal cracking resistance. Thermal testing indicated that graphite and carbon black improve the thermal properties of asphalt mixes and the combined conductive fillers are more effective than the single filler.

  3. Percolation Model of Graphite-modified Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    MO Liantong; WU Shaopeng; LIU Xiaoming; CHEN Zheng

    2005-01-01

    The addition of graphite powder in conventional asphalt mixture can produced asphalt concrete with excellent electrical performance. Percolation theory was employed to discuss the relation between the conductivity and graphite content of graphite-modified asphalt concrete. It was found that the results of percolation model are consistent with experimental values. The percolation threshold of graphite-modified asphalt concrete is 10.94% graphite content account for the total volume of the binder phase consisting of asphalt and graphite. The critical exponent is 3.16, beyond the range of 1.6-2.1 for the standard lattice continuous percolation problem. Its reason is that the tunnel conduction mechanism originates near the critical percent content, which causes this system to be not universal. Tunnel mechanism is demonstrated by the nonlinear voltage-current characteristic near percolation threshold.The percolation model is able to well predict the formation and development of conductive network in graphite-modified asphalt concrete.

  4. Viscoelastic Analysis of Asphalt Mixture Based on Creep Test

    Directory of Open Access Journals (Sweden)

    Lihua Zhao

    2013-01-01

    Full Text Available Two kinds of mineral fibers were added to AC-16C asphalt mixture. Trabecular bending creep experiments of asphalt mixtures were carried out at -10 and 20°C. The influence of mineral fibers on the low temperature viscoelasticity of asphalt mixtures were analyzed systemically. Furthermore, by using Origin, Burgers viscoelastic model was used to investigate the parameter regression for the creep test results at the different temperatures. The results show that the addition of mineral fibers can effectively improve the bending creep rate of asphalt mixtures, indicates the increase of crack resistance of asphalt mixtures. Good agreement between experimental data and Burgers model was found. The parameters of Burgers model at different temperatures can also provide data support for the viscoelastic design of asphalt pavements.

  5. An Improvement in Electrical Properties of Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; MO Lian-tong; SHUI Zhong-he; XUAN Dong-xing; XUE Yong-jie; YANG Wen-feng

    2002-01-01

    Materials such as Koch AH - 70, basalt aggregate, limestone powder and graphite particles were used to prepare conductive asphalt concrete, which is a new type of multi functional concrete. The mix proportion by weight was shown as follows. Fineaggregates (2.36-4.75 mm):fine aggregates (< 2.36mm): limestone powder: asphalt = 120:240: 14:30. The content of added graphite particles ranged from 0% to 20% ( by the Special weight of asphalt concerte). A conductive asphalt concrete with a resistivity around 10-103·Ωm was obtained.attention was paid to the effects of graphite content, graphite physical-chemical properties, asphalt content and temperature on the resistivity. Furthermore, an attempt was made to develop an electrically conductive model for asphalt concrete.

  6. Performance of Recycled Porous Hot Mix Asphalt with Gilsonite Additive

    Directory of Open Access Journals (Sweden)

    Ludfi Djakfar

    2015-01-01

    Full Text Available The objective of the study is to evaluate the performance of porous asphalt using waste recycled concrete material and explore the effect of adding Gilsonite to the mixture. As many as 90 Marshall specimens were prepared with varied asphalt content, percentage of Gilsonite as an additive, and proportioned recycled and virgin coarse aggregate. The test includes permeability capability and Marshall characteristics. The results showed that recycled concrete materials seem to have a potential use as aggregate in the hot mix asphalt, particularly on porous hot mix asphalt. Adding Gilsonite at ranges 8–10% improves the Marshall characteristic of the mix, particularly its stability, without decreasing significantly the permeability capability of the mix. The use of recycled materials tends to increase the asphalt content of the mix at about 1 to 2% higher. With stability reaching 750 kg, the hot mix recycled porous asphalt may be suitable for use in the local roads with medium vehicle load.

  7. Research on Surfactant Warm Mix Asphalt Construction Technology

    Science.gov (United States)

    Li, Guoliang; Sun, Jingxin; Guo, Xiufeng

    Discharging temperature of hot asphalt mixture is about 150°C-185°C, volatilization of asphalt fume harms people's health and fuel cost is high. Jinan Urban Construction Group applies PTL/01 asphalt warm mix agent to produce warm mix asphalt to construction of urban roads' asphalt bituminous pavement. After comparing it with performance of traditional hot asphalt mixture, mixing temperature may be reduced by 30°C-60°C, emission of poisonous gas is reduced, energy conservation and environmental protection are satisfied, construction quality reaches requirements of construction specifications and economic, social and environmental benefits are significant. Thus, it can be used for reference for green construction of urban roads.

  8. Determination of Rheological Properties of Bio Mastic Asphalt

    OpenAIRE

    R. Muniandy; H. Jafariahangari; Yunus, R.; S. Hassim

    2008-01-01

    Due to the high oil prices the price of asphalt binder has increased tremendously. This scenario has warranted demand for higher viscosity cheaper asphalt for pavement construction. A study was conducted to take advantage of the Empty Fruit Bunch (EFB) of Date and Oil Palm trees (which are considered as waste) to produce cellulose fiber to be used as additives in the asphalt binder. If these EFB's could be beneficially utilized in any application, it would reduce the load on the nation's land...

  9. Evaluation of asphalt-rubber membrane field performance

    Science.gov (United States)

    Shuler, S.; Gallaway, B. M.; Epps, J. A.

    1982-05-01

    This report presents a record of asphalt-rubber membrane field performance in Texas. An evaluation of performance is presented for forty-five separate projects in thirteen state highway districts. Approximately 850 lane miles of highways are represented by materials constructed as stress absorbing membranes (asphalt-rubber seal coats beneath asphalt concrete overlay). All projects reviewed were constructed between June, 1976 and September, 1981.

  10. Comparison between asphalt rubber and conventional mixtures in overlay design

    OpenAIRE

    Fontes, Liseane P. T. L.; Trichês, Glicério; Pereira, Paulo A. A.; Pais, Jorge C.

    2008-01-01

    Asphalt modified with crumb rubber has been used to produce asphalt rubber mixtures for pavement overlays subjected to heavy loads and high temperatures. Under severe conditions, these mixtures are capable of resisting permanent deformations, having an extended fatigue life and resisting crack propagation in comparison to conventional ones. A laboratory research was conducted to determine the performance properties of overlays with asphalt rubber mixtures produced through wet processes using ...

  11. Performance Evaluation of Semiplastic Recycled Cold Asphalt Using Noncement Binders

    OpenAIRE

    Lee, Byung Jae; Bang, Jin Wook; Kim, Jeong Su; Jang, Young Il

    2015-01-01

    The optimal mixing conditions for semiplastic recycled cold asphalt, which recycled waste asphalt and used noncement binders (NCB), were assessed through verification of the performance. The NCB of 6% desulfurization gypsum mixing was found to have the most outstanding properties. For the Marshall stability, 4% (NCB) filler mixing brought about a 1.92-time strength increase effect compared to OPC (2%) and was improved when using modified asphalt and SBR. The flow test results showed that alth...

  12. Extending the Life of Asphalt Longitudinal Paving Joints

    OpenAIRE

    Hedges, Rex; Brownridge, Jim

    2014-01-01

    Is premature asphalt joint failure bringing your PASER number down? Participants will learn how applying asphalt preservative seals directly to the asphalt longitudinal paving joint can restore plasticity and flexibility and how application of in-depth sealing methods will protect against harmful UV rays, prevent oxidation, and waterproof against chloride intrusion. Rehabilitation methods to repair poorly performing and failed paving joints will also be covered.

  13. Porous Flame-retarded Asphalt Pavement for Highway Tunnel

    Institute of Scientific and Technical Information of China (English)

    HU Shuguang; HUANG Shaolong; Ding Qingjun

    2008-01-01

    A new way to improve the tunnel fire protection by using flame-retarded porous asphalt pavement containing ATH powders was introduced. Based on the miniature burning test designed and conducted, the burning time and temperature of porous asphalt (PA) and flame-retarded porous asphalt (FRPA) were studied comparing with cement concrete pavement, dense-graded HMA and S MA. Results of burning test and pavement performance test indicate that FRPA is appropriate and suitable as the pavement material of highway tunnel.

  14. Use of scrap rubber in asphalt pavement surfaces

    Science.gov (United States)

    Eaton, Robert A.; Roberts, Richard J.; Blackburn, Robert R.

    1991-12-01

    Scrap tire rubber was mixed into an asphalt concrete wearing course to study the effect of ice disbonding from the pavement surface under traffic. Rubber contents of 0, 3, 6, and 12 percent by weight were studied. Initial laboratory ice disbonding test results led to the development of a new paving material, Chunk Rubber Asphalt Concrete (CRAC), that uses larger pieces of rubber in a much denser asphalt concrete mix. Strength values doubled and ice disbonding performance was enhanced.

  15. Evaluation of Hydrated Lime Filler in Asphalt Mixtures

    OpenAIRE

    Mohammed Abbas Hasan Al-Jumaily

    2008-01-01

    Mineral filler is one of important materials and affecting on properties and quality of asphalt mixtures .There are different types of mineral filler depended on cost and quality , the matter encourages us to achieve this study to evaluate hydrated lime filler effects on properties of asphalt mixes related with strength and durability. Conventional asphaltic concrete mixtures with Portland cement and soft sandstone fillers and mixtures modified with hydrated lime were evaluated for their fund...

  16. Increasing the rate of recycled asphalt: an experimental study

    Directory of Open Access Journals (Sweden)

    Marjan TUŠAR

    2014-09-01

    Full Text Available Asphalt is material that can be recycled. In particular reclaimed asphalt (RA contains aged binder, which limits the reuse of RA. In this study the rate of recycled asphalt was increased by adding a rejuvenator containing paraffin. The authors investigated the effect of the rejuvenator in laboratory and in plant prepared samples of asphalt mixture. In laboratory samples with different percentage of RA (0%, 10%, 30%, 50% and rejuvenator were prepared. In asphalt plant only asphalt mixture with highest amount of RA and rejuvenator and control mixture without RA were prepared. On samples were conducted different tests, e.g. determining softening point, Fraass breaking point, penetration, indirect tensile strength. Results on extracted bitumen showed increase in softening point and decrease in Fraass breaking point with increasing percentage of RA and rejuvenator, meaning that service temperature of binders increased. Asphalt samples prepared in asphalt plant were laid on test field. Asphalt with RA and rejuvenator was built in at lower temperature (round 100 °C. Mixtures with RA and rejuvenator have better low temperature properties confirmed with Thermal Stress Restrained Specimen Test (TSRST method, but are less resistant to compaction and less sensitive to water than control mixture. For comparison of long term behaviour wheel tracking test was performed on mixtures built in test field. A week after paving, the control mixture showed better properties, but one year later the results were opposite, asphalt containing RA and rejuvenator was more resistant to rutting. From the results of this experimental study the following was concluded: the amount of RA can be increased by using rejuvenator and the quality of such asphalt mixture is in most cases equal or even better than asphalt mixture made of virgin materials. By using RA we preserve nature, reduce usage of virgin raw materials, but it is cost effective only if recycling degree is high

  17. Bone Glue Modified Asphalt: A Step towards Energy Conservation and Environment Friendly Modified Asphalts

    Science.gov (United States)

    Rizvi, Hashim Raza; Gallo, August A.

    2014-01-01

    Asphalt has been modified for the past several decades using various additives, including synthetic polymers. Polymer modification improves structural and engineering characteristics of the binder, which is a result of improvement in rheological characteristics of binder as well as its adhesion capability with the aggregate. Such enhancement inevitably enhances the performance characteristics of hot mix asphalts (HMA) such as fatigue life, resistance to rutting, and thermal cracking. Even though polymer-modified HMA is popular in North America and European countries, its use is still limited in developing countries of Southeast Asia due to high costs associated with its manufacturing, processing, and energy consumption. In this study, a new kind of asphalt modifier derived from animal wastes, such as bones, hides, and flesh commonly known as Bone Glue, is studied. This biomaterial which is a by-product of food and cattle industries is cheap, conveniently available, and produced locally in developing countries. The results of the research study showed that the bone glue can easily be mixed with asphalt without significantly altering the asphalt binder's viscosity and mixing and compaction temperatures of HMA. Additionally, improvements in complex shear modulus for a range of temperatures were also determined and it was found that complex shear modulus was improved by bone glue modification.

  18. Performance Evaluation of Semiplastic Recycled Cold Asphalt Using Noncement Binders

    Directory of Open Access Journals (Sweden)

    Byung Jae Lee

    2015-01-01

    Full Text Available The optimal mixing conditions for semiplastic recycled cold asphalt, which recycled waste asphalt and used noncement binders (NCB, were assessed through verification of the performance. The NCB of 6% desulfurization gypsum mixing was found to have the most outstanding properties. For the Marshall stability, 4% (NCB filler mixing brought about a 1.92-time strength increase effect compared to OPC (2% and was improved when using modified asphalt and SBR. The flow test results showed that although an increase dosage of filler and SBR decreased the flow value of the semiplastic recycled cold asphalt, an increase dosage of asphalt emulsion improved the flow value. The indirect tensile strength and liquid immersion residual stability for the condition with greatest Marshall stability were most outstanding with 0.95 MPa and 83.6%, respectively. Evaluation of the recycled cold asphalt abrasion durability revealed that for the case of mixing more than 4% NCB the mass loss rate was lower than 20%. The abrasion durability was found to improve when using modified emulsified asphalt and SBR substitution. From the test results, it was found that the optimal mixing proportion of semiplastic recycled cold asphalt satisfied mechanical properties and durability is NCB with 4%, emulsified asphalt with 3%, and SBR substitution with 20%.

  19. Creep Characteristics of Crumb Rubber Modified Asphalt Binder

    Institute of Scientific and Technical Information of China (English)

    WANG Lan; CHANG Chunqing; XING Yongming

    2011-01-01

    Crumb rubber modified asphalt containing 20 percent crumb rubber particles of 30mesh has been examined by Scanning Electron Microscope (SEM) to observe the microcosmic appearance and the characteristic distribution of crumb rubber particles in asphalt. The SEM pictures reveal that the crumb rubber particles distribute evenly in the asphalt and they are compatible well with asphalt. The shear creep test of crumb rubber modified asphalt was carried out at - 10 ℃ and 40 ℃ by Dynamic Shear Rheology (DSR). The shearing deformation at different temperature and creep stiffness modulus curve at loading stage of crumb rubber modified asphalt have been measured. The stiffness modulus of crumb rubber modified asphalt is much temperature sensitive and it decays much quick at the early stage of loading than normal asphalt. The rate of decay of stiffness modulus is slow at the subsequent stage and stiffness modulus approaches to a stable value at the final stage at a higher temperature. In addition, Burgers model is suitable to describe and simulate experimental results of viscoelastic properties of the crumb rubber modified asphalt.

  20. Safety evaluation of asphalt products for final disposal

    International Nuclear Information System (INIS)

    Under the present situation, the wastes concentrated according to the radioactivity level, the properties and the environmental conditions are usually solidified in view of limiting the escape of the radioactive substances to the environment as small as possible by containment. The materials used for the solidification are cement, asphalt, plastics, ceramics and so on, and the selection is made by taking the kinds and radioactivity level of wastes, final disposing method, economy and handling into consideration. Asphalt is more suitable than cement to the wastes coming from PWR power plants, which contain boric acid for controlling nuclear reaction, and the effect of reducing the volume of wastes is high. It is economical when a certain scale is reached, accordingly recently, the use of asphalt for the solidification of wastes is going to increase. For the solidification of low level wastes, straight-run asphalt is suitable, and for high level wastes, heat-resistant blown asphalt is suitable. Asphalt-solidified bodies can contain 40-60 wt.% of wastes without any problem. The present situation of asphalt solidification in foreign countries, the physical properties required for the disposal of asphalt-solidified bodies, and the leaching, combustibility, radiation resistance and form stability of asphalt-solidified bodies are described. (Kako, I.)

  1. Field testing of asphalt-emulsion radon-barrier system

    International Nuclear Information System (INIS)

    Three years of laboratory and field testing have demonstrated that asphalt emulsion seals are effective radon diffusion barriers. Both laboratory and field tests in 1979, 1980 and 1981 have shown that an asphalt emulsion seal can reduce radon fluxes by greater than 99.9%. The effective diffusion coefficient for the various asphalt emulsion admix seals averages about 10-6 cm2/s. The 1981 joint field test is a culmination of all the technology developed to date for asphalt emulsion radon barrier systems. Preliminary results of this field test and the results of the 1980 field test are presented. 18 figures, 6 tables

  2. Hanford Permanent Isolation Barrier Program: Asphalt technology development

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.

    1994-11-01

    An important component of the Hanford Permanent Isolation Barrier is the use of a two-layer composite asphalt system, which provides backup water diversion capabilities if the primary capillary barrier fails to meet infiltration goals. Because of asphalt`s potential to perform to specification over the 1000-year design life criterion, a composite asphalt barrier (HMAC/fluid-applied polymer-modified asphalt) is being considered as an alternative to the bentonite clay/high density poly(ethylene) barriers for the low-permeability component of the Hanford Permanent Isolation Barrier. The feasibility of using asphalt as a long-term barrier is currently being studied. Information that must be known is the ability of asphalt to retain desirable physical properties over a period of 1000 years. This paper presents the approach for performing accelerated aging tests and evaluating the performance of samples under accelerated conditions. The results of these tests will be compared with asphalt artifact analogs and the results of modeling the degradation of the selected asphalt composite to make life-cycle predictions.

  3. Modification of Asphalt by the Use of Crumb Rubber

    Directory of Open Access Journals (Sweden)

    Shah Room

    2014-01-01

    Full Text Available Health aspects enforced to ponder a study on asphalt which incorporate rubber crumbs to increase strength and flexibility of asphalt. Disposal of waste tires is a menace and it’s a serious problem globally because it is not easily biodegradable as these tires consume large spaces, open burning cause serious problems. By the use of rubber tires, this scrap is utilized efficiently and reduces the cost of asphalt to produce economical system. The asphalt is absorbed by the rubber particles which swells at high temperature allowing greater concentration of liquid asphalt. The partial replacement of crumb rubber in asphalt is 5%, 10%, 15%, and 20% (D05, D10, D15, and D20. The analysis of incorporated asphalt was done in hot mix asphalt. The generated results showed that the value for resilient modulus and creep stiffness is more as compared to the conventional asphalt and in the accumulated strain the values are much lesser which is positive approach.

  4. Effects of reclaimed asphalt pavement on indirect tensile strength test of foamed asphalt mix tested in dry condition

    International Nuclear Information System (INIS)

    Indirect tensile strength (ITS) test was conducted to analyse strength of the foamed asphalt mixes incorporating reclaimed asphalt pavement. Samples were tested for ITS after cured in the oven at 40°C for 72 hours. This testing condition known as dry condition or unconditioned. Laboratory results show that reclaimed asphalt pavement (RAP) contents insignificantly affect the ITS results. ITS results significantly affected by foamed bitumen contents.

  5. Effects of reclaimed asphalt pavement on indirect tensile strength test of foamed asphalt mix tested in dry condition

    Science.gov (United States)

    Yati Katman, Herda; Rasdan Ibrahim, Mohd; Yazip Matori, Mohd; Norhisham, Shuhairy; Ismail, Norlela

    2013-06-01

    Indirect tensile strength (ITS) test was conducted to analyse strength of the foamed asphalt mixes incorporating reclaimed asphalt pavement. Samples were tested for ITS after cured in the oven at 40°C for 72 hours. This testing condition known as dry condition or unconditioned. Laboratory results show that reclaimed asphalt pavement (RAP) contents insignificantly affect the ITS results. ITS results significantly affected by foamed bitumen contents.

  6. Extending the Lifespan of Porous Asphalt Concrete

    OpenAIRE

    Zhang, Y.

    2015-01-01

    Porous Asphalt (PA) concrete is widely used as a surfacing layer on highways in the Netherlands. The service life of PA wearing courses is limited because of the fact that it is vulnerable to raveling. The possibilities of applying preventive maintenance to PA wearing courses by means of spraying rejuvenation products on the pavement surfaces are being investigated with high interest in the Netherlands. A material which has the ability to penetrate into the bituminous binder and soften (rejuv...

  7. Classification of recycled asphalt (RA) material

    OpenAIRE

    Wendling, Louisette; DE LA ROCHE SAINT ANDRE, Chantal; Gaudefroy, Vincent; MARSAC, Paul; TEBALDI, Gabriele; DAVE, Eshan; HUGENER, Martin; BOCCI, Maurizio; Loizos, Andreas; JENKINS, Kim; MARRADI, Alessandro; Grilli, Andrea; GRAZIANI, Andrea; Pasetto, Marco; MURAYA, Patrick

    2012-01-01

    Use of recycled asphalt pavements (RA) in pavement rehabilitation processes is continuously growing as recycling techniques, such as cold recycling (CR), are being utilized in increasing magnitude. The focus of this paper is on developing a state of the art and state of the practice summary of processes used for classification of RA. A variety of topics were explored through an exhaustive literature search, these include RAP production methods, definition of RA materials, stockpiling practice...

  8. Active carbon production from modified asphalt

    International Nuclear Information System (INIS)

    A granular activated carbons (GACs) have been prepared from some local raw materials such as Qiayarah asphalt (QA) after some modification treatments of this asphalt by various ratios of its original constituents (asphaltenes and maltens) at 180 degree C. Thermal carbonization method by sulfur and steam physical activation have been used for AC preparation. The carbons thus prepared were characterized in the term of iodine, methylene blue (MB), P-nitro phenol (PNP) and CCl4 adsorption. The BET surface area of the prepared ACs has been estimated via a calibration curve between iodine numbers and surface area determined from N2 adsorption isotherm from previous studies, also, the surface area of the prepared ACs were determined through another methods such as retention method by ethylene glycol mono ethyl ether (EGME), adsorption from vapor phase using acetone vapor and adsorption from solution method using PNP and MB as solutes. The results referred to the success of modification method for preparing ACs of good micro porosity as compared with the AC from the untreated asphalt as well as the commercial sample. (author)

  9. Method of interrupting asphalt solidifying operation

    International Nuclear Information System (INIS)

    Purpose: To shorten the time required for interrupting operation, by specifying methods of supplying and interrupting liquid wastes, water and asphalts. Method: Electrical power supply for a heat medium heater is disconnected simultaneously with the start for the stopping operation. The temperature for the heat medium is detected by a heat medium thermometer, the flow rate of a waste liquid supply pump is reduced by way of a rotation controller for the liquid waste supply pump and the amount of liquid wastes supplied is gradually decreased along with the reduction in the temperature for the heat medium. Then, when the temperature for the heat medium lowered to about 190 - 2100C, supply of the liquid wastes is interrupted and cleaning water is supplied to a liquid wastes supply tank while closing the liquid wastes supply tank main valve and opening a cleaning water valve to thereby clean the radioactive substances. Then, after stopping the supply of the cleaning water, asphalt is continued to be supplied for several minutes, the radioactive substances deposited in an evaporator and an agitation blade are sufficiently washed out. Then, after stopping the asphalt tank, operations for the driving device and the heat medium pump are stopped. This enables cooling for the heat medium in a short time using no exclusive heat medium cooler, as well as clean the radioactive substances. (Horiuchi, T.)

  10. Dynamic linear viscoelastic properties and extensional failure of asphalt binders

    Science.gov (United States)

    Ruan, Yonghong

    Billions of dollars are spent annually in USA to maintain old pavements that are badly cracked. In order to reduce this expenditure, it is desirable to have criteria for selecting asphalts with superior cracking resistance that will provide pavements with longer durability. Literature reports indicate that the ductility of binders recovered from asphalt pavements correlates with cracking failure. However, ductility measurement is a time and material consuming process, and subject to reproducibility difficulties, as are all failure tests. In addition, ductility measurement does not belong to the currently used Superpave(TM) specification. Correlations between ductility and dynamic viscoelastic properties (measured with the dynamic shear rheometer, DSR), which are much easier and faster to perform and may be included into the Superpave(TM) system, are studied for both straight and modified binders. Ductility correlates quite well with G'/(eta '/G') for conventional asphalt binders aged at different conditions, especially when ductility is below 10 cm. However, for modified asphalts, there is no universal correlation between ductility and G'/(eta'/G'), even in the low ductility region. As far as the asphalt binder in pavement is concerned, the loss due to oxidative aging of its ductility is an important reason for pavement cracking. Polymer modification modifies the rheological and oxidative hardening properties of asphalt binders. The effect of polymeric modifiers on various properties of asphalt binders was investigated. Modifiers studied were diblock poly (styrene-b-butadiene) rubber (SBR), triblock poly (styrene-b-butadiene-b-styrene) (SBS), and tire rubber. Polymer modified binders have a lower hardening and oxidation rate than their corresponding base asphalts. In addition, modified binders have lower hardening susceptibility compared with their base materials and in some cases the results can be dramatic. Polymer modification improves asphalt binders' shear

  11. Hot asphalt burns: a review of injuries and management options.

    Science.gov (United States)

    Bosse, George M; Wadia, Shernaz A; Padmanabhan, Pradeep

    2014-07-01

    Hot asphalt burns to human tissue can increase the likelihood of infection and potential conversion of partial thickness to full-thickness injuries. Successful intervention for hot asphalt burns requires immediate and effective cooling of the asphalt on the tissue followed by subsequent gradual removal of the cooled asphalt. A review of the literature reveals that multiple substances have been used to remove asphalt, including topical antibiotics, petroleum jelly, a commercial product known as De-Solv-It (ORANGE-SOL, Chandler, AZ), sunflower oil, baby oil, liquid paraffin, butter, mayonnaise, and moist-exposed burn ointment (MEBO). Although many of these products may be effective in the removal of asphalt, they may not be readily available in an emergency department setting. Topical antibiotics are readily available, are more commonly described in the medical literature, and would be expected to be effective in the removal of asphalt. We developed guidelines for on scene (first-aid) management and the initial care of such patients upon presentation to a health care facility. These guidelines emphasize the principles of early cooling, gradual removal of adherent asphalt using topical antibiotics, and avoidance of the use of topical agents, which are likely to result in tissue toxicity. PMID:24630605

  12. Hanford Permanent Isolation Barrier Program: Asphalt technology development

    International Nuclear Information System (INIS)

    An important component of the Hanford Permanent Isolation Barrier is the use of a two-layer composite asphalt system, which provides backup water diversion capabilities if the primary capillary barrier fails to meet infiltration goals. Because of asphalt's potential to perform to specification over the 1000-year design life criterion, a composite asphalt barrier (HMAC/fluid-applied polymer-modified asphalt) is being considered as an alternative to the bentonite clay/high density poly(ethylene) barriers for the low-permeability component of the Hanford Permanent Isolation Barrier. The feasibility of using asphalt as a long-term barrier is currently being studied. Information that must be known is the ability of asphalt to retain desirable physical properties over a period of 1000 years. This paper presents the approach for performing accelerated aging tests and evaluating the performance of samples under accelerated conditions. The results of these tests will be compared with asphalt artifact analogs and the results of modeling the degradation of the selected asphalt composite to make life-cycle predictions

  13. Including asphalt cooling and rolling regimes in laboratory compaction procedures

    NARCIS (Netherlands)

    Bijleveld, F.R.; Doree, A.G.; Kim,

    2014-01-01

    Given the various changes occurring in the asphalt construction industry, improved process and quality control is becoming essential. The significance of appropriate rolling and compaction for the quality of asphalt is widely acknowledged and vital for improved process control. But what constitutes

  14. Durability ofAsphalt in Different Corrosion Solution

    Institute of Scientific and Technical Information of China (English)

    CHEN Shuanfa; GUAN Bowen; XIONG Rui; SHENG Yanping; HE Rui

    2011-01-01

    The corrosion to asphalt mixture under different kinds of corrosion solution,such as pH=2 solution,pH=12 solution,pH =12 solution and 10% Na2SO4 solution,was studied.The performance attenuation of asphalt mixture was analyzed under the normal environment and the freeze-thaw environment,and the analysis was given on the sensitivity of the test results to the evaluation index.The experimental results show that the performance of asphalt mixture is attenuated faster under the acidic solution,alkaline solution and sulfate solution.Corrosion factor Kc,freeze-thaw corrosion factor Kf,and freeze-thaw effect factor Kfc are proposed to evaluate asphalt mixture resistance to corrosion in different kinds of corrosion solution.The values of Kc and Kfc decrease with the increasing of corrosion time.The change rule of Kf show that the rate of corrosion is decreased by the action of freeze-thaw in acidic solution and in alkaline solution,but is increased by the action of freeze-thaw in sulfate solution.The microscopic analysis indicates that acid solution reacts with aggregate of asphalt mixture,alkaline solution reacts with asphalt cement of asphalt mixture,the surface tension of sulfate solution and crystallization of sulfate are the main reasons which weak the performance of asphalt mixture.

  15. Effects of conductive fillers on temperature distribution of asphalt pavements

    International Nuclear Information System (INIS)

    The sun provides a cheap and abundant source of clean and renewable energy. Solar cells have been used to capture this energy and generate electricity. A more useful form of the solar cell would be asphalt pavements, which get heated up by solar radiation. Graphite powders are utilized as thermal conductive fillers to make an asphalt collector conductive so as to improve the efficiency of the asphalt collector. Accounting for the important application conditions and evaluating the effects of the heat conductive materials and the solar energy absorbability of the conductive asphalt collector, a finite element model has been developed to predict temperature distributions in the conductive asphalt solar collector. In this study, an experimental validation exercise was conducted using the measured data taken from full-depth asphalt slabs. Validation results showed that the model can satisfactorily predict the temperature distributions in asphalt concrete slabs. The optimal depth is 25-50 mm for placing pipes that serve as the heat exchanger. Meanwhile, the effect of the surroundings on the solar energy potential of the asphalt collector was noticeable.

  16. Effects of conductive fillers on temperature distribution of asphalt pavements

    Science.gov (United States)

    Mingyu, Chen; Shaopeng, Wu; Yuan, Zhang; Hong, Wang

    2010-05-01

    The sun provides a cheap and abundant source of clean and renewable energy. Solar cells have been used to capture this energy and generate electricity. A more useful form of the solar cell would be asphalt pavements, which get heated up by solar radiation. Graphite powders are utilized as thermal conductive fillers to make an asphalt collector conductive so as to improve the efficiency of the asphalt collector. Accounting for the important application conditions and evaluating the effects of the heat conductive materials and the solar energy absorbability of the conductive asphalt collector, a finite element model has been developed to predict temperature distributions in the conductive asphalt solar collector. In this study, an experimental validation exercise was conducted using the measured data taken from full-depth asphalt slabs. Validation results showed that the model can satisfactorily predict the temperature distributions in asphalt concrete slabs. The optimal depth is 25-50 mm for placing pipes that serve as the heat exchanger. Meanwhile, the effect of the surroundings on the solar energy potential of the asphalt collector was noticeable.

  17. Crack repair of asphalt concrete with induction energy

    NARCIS (Netherlands)

    García, A.; Schlangen, E.; Ven, M. van de; Vliet, D. van

    2011-01-01

    It is well known that the healing rates of asphalt courses increase with the temperature. A new method, induction heating, is used in this paper to increase the lifetime of asphalt concrete pavements. Mastic will be first made electrically conductive by the addition of conductive fibers. Then it wil

  18. 7 CFR 2902.36 - Concrete and asphalt release fluids.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Concrete and asphalt release fluids. 2902.36 Section... PROCUREMENT Designated Items § 2902.36 Concrete and asphalt release fluids. (a) Definition. Products that are designed to provide a lubricating barrier between the composite surface materials (e.g., concrete...

  19. Laboratory and Field Asphalt Fatigue Performance, Matching Theory with Practice

    NARCIS (Netherlands)

    Pramesti, F.P.

    2015-01-01

    This thesis investigates the relationship between predicted and observed fatigue life of asphalt. This study also investigates the positive effects of modifying bitumen with Retona, a bitumen modifier produced in Indonesia from natural asphalt rock sources, on pavement performance in terms of increa

  20. Characterization of Failure and Permanent Deformation Behaviour of Asphalt Concrete

    NARCIS (Netherlands)

    Wang, J.G.

    2015-01-01

    Asphalt concrete is a viscoelastic material consisting of aggregates, filler and bitumen. The response of asphalt concrete is highly dependent on temperature, loading rate and confining pressure. Permanent deformation is one of the most important distresses developing during the flexible pavement se

  1. Improving the quality of asphalt coating with carbon nanomodifiers

    Science.gov (United States)

    Larisa, Urkhanova; Nikolay, Shestakov; Aleksandr, Semenov; Natalya, Smirnyagina; Irina, Semenova

    2015-07-01

    This article deals with the possibility of modifying the binder by adding carbon nanomodifier to bitumen to improve the quality of asphalt. Addition of 0.05%-0.5% of nanomodifier significantly changes the properties of bitumen. Asphalt with this astringent has increased strength, heat resistance and shear resistance.

  2. 40 CFR 443.30 - Applicability; description of the asphalt roofing subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphalt roofing subcategory. 443.30 Section 443.30 Protection of Environment ENVIRONMENTAL PROTECTION... MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Roofing Subcategory § 443.30 Applicability; description of the asphalt roofing subcategory. The provisions of this subpart are applicable to...

  3. 40 CFR 443.20 - Applicability; description of the asphalt concrete subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphalt concrete subcategory. 443.20 Section 443.20 Protection of Environment ENVIRONMENTAL PROTECTION... MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Concrete Subcategory § 443.20 Applicability; description of the asphalt concrete subcategory. The provisions of this subpart are applicable to...

  4. 40 CFR 443.40 - Applicability; description of the linoleum and printed asphalt felt subcategory.

    Science.gov (United States)

    2010-07-01

    ... linoleum and printed asphalt felt subcategory. 443.40 Section 443.40 Protection of Environment... PAVING AND ROOFING MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Linoleum and Printed Asphalt Felt Subcategory § 443.40 Applicability; description of the linoleum and printed asphalt felt subcategory....

  5. 40 CFR 443.10 - Applicability; description of the asphalt emulsion subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphalt emulsion subcategory. 443.10 Section 443.10 Protection of Environment ENVIRONMENTAL PROTECTION... MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Emulsion Subcategory § 443.10 Applicability; description of the asphalt emulsion subcategory. The provisions of this subpart are applicable to...

  6. Mechanical Properties of Asphalt Pavement Structure in Highway Tunnel

    Institute of Scientific and Technical Information of China (English)

    SHI Chun-xiang; GUO Zhong-yin

    2008-01-01

    A linear full 3D finite element method (FEM) was performed in order to present the key design parameters of highway tunnel asphalt pavement under double-wheel load on rectangular loaded area considering horizontal contact stress induced by the acceleration/deceleration of vehicles. The key design parameters are the maximum horizontal tensile stresses at the surface of the asphalt layer, the maximum horizontal tensile stresses at the bottom of the asphalt layer and the maximum vertical shear stresses at the surface of the as- phalt layer were calculated. The influencing factors such as double-wheel weight; asphalt layer thickness; base course stiffness modulus and thickness; and the contact conditions among the structure layers on these key design parameters were also examined separately to propose construction procedures of highway tunnel asphalt pavement.

  7. Monitoring asphalt pavement damages using remote sensing techniques

    Science.gov (United States)

    Mettas, Christodoulos; Themistocleous, Kyriacos; Neocleous, Kyriacos; Christofe, Andreas; Pilakoutas, Kypros; Hadjimitsis, Diofantos

    2015-06-01

    One of the main issues in the maintenance plans of road agencies or governmental organizations is the early detection of damaged asphalt pavements. The development of a smart and non-destructive systematic technique for monitoring damaged asphalt pavements is considered a main priority to fill this gap. During the 1970's, remote sensing was used to map road surface distress, while during the last decade, remote sensing became more advanced, thereby assisting in the evolution of the identification and mapping of roads. Various techniques were used in order to explore condition, age, weaknesses and imperfections of asphalted pavements. These methods were fairly successful in the classification of asphalted surfaces and in the detection of some of their characteristics. This paper explores the state of the art of using remote sensing techniques for monitoring damaged pavements and some typical spectral profiles of various asphalt pavements in Cyprus area acquired using the SVC1024 field spectroradiometer.

  8. Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

    Directory of Open Access Journals (Sweden)

    Bo Li

    2014-01-01

    Full Text Available Improving the compatibility between flame retardant and asphalt is a difficult task due to the complex nature of the materials. This study explores a low dosage compound flame retardant and seeks to improve the compatibility between flame retardants and asphalt. An orthogonal experiment was designed taking magnesium hydroxide, ammonium polyphosphate, and melamine as factors. The oil absorption and activation index were tested to determine the effect of titanate on the flame retardant additive. The pavement performance test was conducted to evaluate the effect of the flame retardant additive. Oxygen index test was conducted to confirm the effect of flame retardant on flame ability of asphalt binder. The results of this study showed that the new composite flame retardant is more effective in improving the compatibility between flame retardant and asphalt and reducing the limiting oxygen index of asphalt binder tested in this study.

  9. Laboratory Mix Design of Asphalt Mixture Containing Reclaimed Material

    Directory of Open Access Journals (Sweden)

    Davide Lo Presti

    2014-01-01

    Full Text Available This paper presents a study on the production of asphalt test specimens in the laboratory containing reclaimed asphalt. The mixtures considered were stone mastic asphalt concrete mixtures containing up to 30% of reclaimed asphalt. Specimens were compacted to the reference density obtained from the Marshall mix design. Gyration compaction method was used for preparing specimens for the experimental programme, while coring and cutting methods and X-ray computed tomography (CT were used to investigate the change in properties within the specimens and to validate the selected methodology. The study concluded that gyratory compaction is suitable to produce homogeneous test specimens also for mixtures containing high amount of reclaimed asphalt. Nevertheless, preliminary trials for each material are mandatory, as well as final coring and trimming of the specimens due to side effects.

  10. Effect of ageing on fatigue properties of asphalt

    Institute of Scientific and Technical Information of China (English)

    王佶; 庞凌; 吴少鹏; 刘全涛; 陈筝

    2008-01-01

    The fatigue properties of asphalts were investigated after various laboratory simulation ageing tests and outdoor natural exposure ultraviolet radiation ageing,by dynamic shear rheometer(DSR) time sweep fatigue test in constant strain model and a new type of specimen which was introduced to avoid the problem of adhesion failure between rotor and asphalt binder.The results show that outdoor natural exposure ageing(NEA) causes the decrease of retained fatigue life distinctly,and photodegradation caused by outdoor NEA of 1 250 μm thin films asphalt for three months,is found to be severer than pressure ageing vessel(PAV) with respects to retained fatigue life.The effect of photodegradation increases as the time of outdoor NEA increases.DSR time sweep fatigue test in constant strain indicates that the aged styrene-butadiene-styrene(SBS) modified asphalt still displays better fatigue properties than the corresponding base asphalt after ageing.

  11. Utilization of recycled asphalt concrete with warm mix asphalt and cost-benefit analysis.

    Science.gov (United States)

    Oner, Julide; Sengoz, Burak

    2015-01-01

    The asphalt paving industries are faced with two major problems. These two important challenges are generated with an increase in demand for environmentally friendly paving mixtures and the problem of rapidly rising raw materials. Recycling of reclaimed asphalt pavement (RAP) is a critical necessity to save precious aggregates and reduce the use of costly bitumen. Warm Mix Asphalt (WMA) technology provides not only the option of recycling asphalt pavement at a lower temperature than the temperature maintained in hot mixtures but also encourages the utilization of RAP and therefore saves energy and money. This paper describes the feasibility of utilizing three different WMA additives (organic, chemical and water containing) at recommended contents with different percentages of RAP. The mechanical properties and cost-benefit analysis of WMA containing RAP have been performed and compared with WMA without RAP. The results indicated that, 30%, 10% and 20% can be accepted as an optimum RAP addition related to organic, chemical and water containing additives respectively and organic additive with 30% RAP content has an appreciable increase in tensile strength over the control mix. It was also concluded that the RAP with WMA technology is the ability to reduce final cost compared to HMA and WMA mixtures. PMID:25574851

  12. THE FATIGUE DURABILITY OF THE MODIFIED ASPHALT CONCRETE UNDER THE EFFECT OF INTENSIVE TRAFFIC LOADS

    Directory of Open Access Journals (Sweden)

    Yuri KALGIN

    2016-06-01

    Full Text Available The problem of prediction of the service life of asphalt concrete surface constructed with modified asphalt concrete application onto a traffic lane is examined. Asphalt concrete behaviour in road surface under the traffic loads was analysed. There were shown The results of experiments and their mathematical analysis of the assessment of standard and modified cold asphalt concrete fatigue life on road surface were shown. The service life of an asphalt concrete surface covered with standard and modified cold asphalt concrete is examined. The prediction has been received with an account of stress relaxation processes in asphalt concrete pavement and unevenness of traffic load application.

  13. Surface Modification of Fire-retardant Asphalt with Silane Coupling Agent

    Institute of Scientific and Technical Information of China (English)

    CHEN Huiqiang; TANG Boming

    2012-01-01

    The theory and approach of the surface modified of asphalt fire-retardant with silane coupling agent were introduced,The optimum silane dosage was determined,and the structure and properties of the asphalt fire-retardant before and after the surface modification were characterized by infrared spectrum and thermo gravimetric analysis.The dispersion effect of asphalt fire-retardant was studied.The influence of the surface modification on the hydrophilicity and lipophilicity of the asphalt fire-retardant was analyzed.The experimental results showed that there were physical and chemical interactions between the silane coupling agent and the asphalt fire-retardant,which reduced the surface polarity of the asphalt fire retardant.The optimum silane coupling agent dosage was 0.95% of the asphalt fire retardant.The surface modification improved the thermal stability,dispersibility and lipophilicity of the asphalt fire retardant,which enhanced the compatibility between asphalt fire retardant and asphalt.

  14. Evaluation of Warm Mix Asphalt Technologies and Recycled Asphalt Pavements in Truckee Meadows, Nevada

    Science.gov (United States)

    Diaz Montecino, Cristian

    This study evaluated the properties and laboratory-performance of Hot Mix Asphalt (HMA) and Warm Mix Asphalt (WMA) mixtures with different levels of Recycled Asphalt Pavements (RAP) content: none for control mixtures, around 15% by dry weight of aggregates, and more than 30% by dry weight of aggregates. The rheological properties were evaluated for virgin and recovered RAP asphalt binders. The target amount of RAP in the mixtures was determined by using Blending Charts and Mortar Experiments. The mixtures are design through the guidelines established in Marshall Mix Design Method considering additional modifications for RAP and WMA from Superpave Mix Design. The mixtures are evaluated for their resistance to moisture damage by means of measuring the Dynamic Modulus |E*| after three freeze/thaw cycles and the indirect tensile strength after one and three freeze/thaw cycles. The resistance of the mixtures to permanent deformation was also evaluated by using the Asphalt Mixture Performance Tester (AMPT) to measure the flow number (FN). For this study, it was determined that the resistance to moisture damage decreases as the number of freeze/thaw cycles increases for most of the evaluated mixtures. Mixtures exhibited an increase in dynamic modulus as the RAP percentage increased. A decrease in the resistance to moisture damage was detected with the increase in RAP content for most of the mixtures. HMA mixtures exhibited a better performance in rutting than the WMA mixtures. An increase in rutting resistance was observed with the increase in RAP percentage for HMA mixtures whereas an inconsistent trend was observed for WMA mixtures. Further study is needed to validate the use of the high percentage of RAP in Washoe County.

  15. THE FATIGUE DURABILITY OF THE MODIFIED ASPHALT CONCRETE UNDER THE EFFECT OF INTENSIVE TRAFFIC LOADS

    OpenAIRE

    Yuri KALGIN; Alexander STROKIN

    2016-01-01

    The problem of prediction of the service life of asphalt concrete surface constructed with modified asphalt concrete application onto a traffic lane is examined. Asphalt concrete behaviour in road surface under the traffic loads was analysed. There were shown The results of experiments and their mathematical analysis of the assessment of standard and modified cold asphalt concrete fatigue life on road surface were shown. The service life of an asphalt concrete surface covered with standard an...

  16. Some Properties of Emulsified Asphalt Paving Mixture at Iraqi Environmental Conditions

    OpenAIRE

    Shakir.A.Al-Mishhadani; Hasan.H.Al-Baid

    2014-01-01

    Cold emulsified asphalt mixture is generally a mix made of emulsified asphalt withaggregate. Emulsified asphalt is manufactured from base asphalt, emulsifier agent and waterwith approximate percentage of 40% to 75% asphalt, 0.1% to 2.5% emulsifier and 25% to60% water plus some minor components. This study aims to use the cold emulsified asphaltmixtures for road construction and maintenance in Iraq as an alternative to the hot asphaltmixtures, due to its economical, practical and environmental...

  17. The first engineered self-healing asphalt road: How is it performing?

    OpenAIRE

    Liu, Q.; Schlangen, H.E.J.G.; Van Bochove, G.

    2013-01-01

    Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surface layer, is the main damage mechanism of porous asphalt surface wearing courses. In this research, an induction healing approach (namely, activating the healing process of asphalt concrete through ...

  18. Decision of National and Provincial Highway Asphalt Pavement Structure Based on Value Engineering

    OpenAIRE

    Yingwei Ren; Jingsong Shan

    2014-01-01

    It is important that decision of asphalt pavement structure requires overall considerations of the performance and financial investment. To have asphalt pavement structure fulfilling good reliability, the asphalt pavement structure decision was researched based on value engineering theory. According to the national and provincial highway investigation data in Shandong Province during the last decade, the asphalt pavement performance attenuation rules of traffic levels and asphalt layer thickn...

  19. Effectiveness of Micro- and Nanomaterials in Asphalt Mixtures through Dynamic Modulus and Rutting Tests

    OpenAIRE

    Hui Yao; Zhanping You

    2016-01-01

    The objectives of this research are to use micro- and nanomaterials to modify the asphalt mixture and to evaluate the mechanical performance of asphalt mixtures. These micro- and nanomaterials, including carbon microfiber, Nanomer material, nanosilica, nonmodified nanoclay, and polymer modified nanoclay, were selected to blend with the control asphalt to improve the overall performance of the modified asphalt binders and mixtures. The microstructures of original materials and asphalt binders ...

  20. Modeling and Simulation of Flow and Formation Damage of Asphalt-Paved Roads

    OpenAIRE

    M. H. Alawi; M. M. El-Qadi; M. A. El-Ameen

    2013-01-01

    Porous asphalt is a standard asphalt built on aggregate storage bed which allows water to drain through it and reduces stormwater runoff. However, porosity of the porous asphalt and the storage bed may be effectively reduced due to trapping suspended solids from the water or from the asphalt damage. In this paper, we present mathematical modeling and numerical simulation of flow and damage of porous asphalt-paved roads. A mathematical model to describe the fine-particles transport carried by ...

  1. Performance-based asphalt mixture design methodology

    Science.gov (United States)

    Ali, Al-Hosain Mansour

    Today, several State D.O.T.s are being investigating the use of tire rubber with local conventional materials. Several of the ongoing investigations identified potential benefits from the use of these materials, including improvements in material properties and performance. One of the major problems is being associated with the transferability of asphalt rubber technology without appropriately considering the effects of the variety of conventional materials on mixture behavior and performance. Typically, the design of these mixtures is being adapted to the physical properties of the conventional materials by using the empirical Marshall mixture design and without considering fundamental mixture behavior and performance. Use of design criteria related to the most common modes of failure for asphalt mixtures, such as rutting, fatigue cracking, and low temperature thermal cracking have to be developed and used for identifying the "best mixture," in term of performance, for the specific local materials and loading conditions. The main objective of this study was the development of a mixture design methodology that considers mixture behavior and performance. In order to achieve this objective a laboratory investigation able to evaluate mixture properties that can be related to mixture performance, (in terms of rutting, low temperature cracking, moisture damage and fatigue), and simulating the actual field loading conditions that the material is being exposed to, was conducted. The results proved that the inclusion of rubber into asphalt mixtures improved physical characteristics such as elasticity, flexibility, rebound, aging properties, increased fatigue resistance, and reduced rutting potential. The possibility of coupling the traditional Marshall mix design method with parameters related to mixture behavior and performance was investigated. Also, the SHRP SUPERPAVE mix design methodology was reviewed and considered in this study for the development of an integrated

  2. Microbial Life in a Liquid Asphalt Desert

    CERN Document Server

    Schulze-Makuch, Dirk; Antonio, Marina Resendes de Sousa; Ali, Denzil; Hosein, Riad; Song, Young C; Yang, Jinshu; Zaikova, Elena; Beckles, Denise M; Guinan, Edward; Lehto, Harry J; Hallam, Steven J

    2010-01-01

    An active microbiota, reaching up to 10 E+7 cells/g, was found to inhabit a naturally occurring asphalt lake characterized by low water activity and elevated temperature. Geochemical and molecular taxonomic approaches revealed novel and deeply branching microbial assemblages mediating anaerobic hydrocarbon degradation, metal respiration and C1 utilization pathways. These results open a window into the origin and adaptive evolution of microbial life within recalcitrant hydrocarbon matrices, and establish the site as a useful analog for the liquid hydrocarbon environments on Saturn's moon Titan.

  3. Finite element simulation of asphalt fatigue testing

    DEFF Research Database (Denmark)

    Ullidtz, Per; Kieler, Thomas Lau; Kargo, Anders

    1997-01-01

    damage mechanics.The paper describes how continuum damage mechanics may be used with a finite element program to explain the progressive deterioration of asphalt mixes under laboratory fatigue testing. Both constant stress and constant strain testing are simulated, and compared to the actual results from...... three point and four point fatigue test on different mixes. It is shown that the same damage law, based on energy density, may be used to explain the gradual deterioration under constant stress as well as under constant strain testing.Some of the advantages of using this method for interpreting fatigue...

  4. Study on the hardening mechanism of cement asphalt binder

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The hydration and hardening mechanism of cement asphalt binder(CAB) was studied.The early hydration process,hydration products and paste microstructure of CAB made by Portland cement and anionic asphalt emulsion were investigated by calorimetry,X-ray diffraction,and environmental scanning electron microscopy.The early hydration process of CAB can be characterized as 5 stages similar to those of Portland cement.There is no chemical reaction detected between cement and asphalt,hence no new hydration products other than those of Portland cement are produced.The hardening of CAB begins with the hydration of cement.When the hydration of cement comes into the acceleration period and its exothermic rate comes to the maximum,the coalescence of asphalt particles in asphalt emulsion is triggered.In the hardened system of CAB,it was found that the hydration products of cement form the skeleton and are covered by the continuous asphalt film.They formed an interpenetrating network system.The emulsifiers in the asphalt emulsion may retard the hydration process of cement.

  5. Evaluation of Hydrated Lime Filler in Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Mohammed Abbas Hasan Al-Jumaily

    2008-01-01

    Full Text Available Mineral filler is one of important materials and affecting on properties and quality of asphalt mixtures .There are different types of mineral filler depended on cost and quality , the matter encourages us to achieve this study to evaluate hydrated lime filler effects on properties of asphalt mixes related with strength and durability. Conventional asphaltic concrete mixtures with Portland cement and soft sandstone fillers and mixtures modified with hydrated lime were evaluated for their fundamental engineering properties as defined by Marshall properties , index of retained strength , indirect tensile strength , permanent deformation characteristics , and fatigue resistance .A typical dense graded mixture employed in construction of surface course pavement in Iraq in accordance with SCRB specifications was used .The materials used in this study included mineral aggregate materials (coarse and fine sizes were originally obtained from Najaf Sea quarries and two grades of asphalt cements produced from Daurah refinery which are D47 and D66 . The physical properties , stiffness modulus and chemical composition are evaluated for the recovered asphalt cement from prepared asphalt mixes containing various filler types .The paper results indicated that the addition of hydrated lime as mineral filler improved the permanent deformation characteristics and fatigue life and the use of hydrated lime will decrease the moisture susceptibility of the asphalt mixtures.

  6. Effect of fiber types on relevant properties of porous asphalt

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; LIU Gang; MO Lian-tong; CHEN Zheng; YE Qun-shan

    2006-01-01

    The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes,using the tests of draindown,abrasion,volumetric properties,rutting,and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter (G*/sinδ) of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon Mohr-Coulomb theory,the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore,they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis,cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.

  7. Asphalt emulsion sealing of uranium mill tailings

    International Nuclear Information System (INIS)

    The use of asphalt emulsion to contain radon and radium in uranium tailings is being investigated at the Pacific Northwest Laboratory. Results of these studies indicate that a radon flux reduction of greater than 99% can be obtained using either a poured-on/sprayed-on seal (3.0 to 7.0 mm thick) or an admix seal (2.5 to 15.2 cm thick) containing about 18 wt % residual asphalt. A field test was carried out at the Grand Junction tailings pile in order to demonstrate the sealing process. A reduction in radon flux ranging from 4.5 to greater than 99% (76% average) was achieved using a 15.2 cm (6 in.) admix seal with a sprayed-on top coat. A hydrostatic stabilizer was used to apply the admix. This was followed by compaction to form the radon seal. Overburden was applied to provide a protective soil layer over the seal. Included in part of the overburden was a herbicide to prevent root penetration

  8. Conversion of asphalt into distillate products

    International Nuclear Information System (INIS)

    This paper reports the conversion of asphalt in a micro-autoclave under an inert atmosphere of nitrogen to lighter products. The influence of temperature, contact time and some catalysts, i.e. clay type; UTIMAC, HZSM-5 and sodium silicate, acidic type; phospho-tungstic acid, oxide type; ammonium hepta molybdate, silica gel, nickel oxide and alumina powder, chloride type; stannous chloride and aluminum chloride and modifiers like methyl iodide and coal, on the yield of liquid and gas products was studied. A marked effect of temperature on the yield of liquid as well as gas products was observed. Employment of clay type catalysts was found to be beneficial in term of yields of liquid products. Among the catalysts used; UTIMAC clay caused the maximum conversion to desired products. The other catalysts caused a decline in the yield of desired products because of coke formation due to condensation reactions catalyzed by these catalysts. The effect of concentration in the case of clay as catalyst was also studied, and synergistic effects were observed in terms of desired product yield. The study will be helpful in planning asphalt conversion processes into light oil fractions

  9. Asphalt as biological shielding against fusion neutrons

    International Nuclear Information System (INIS)

    For fusion experiments, thick biological radiation protection shields are necessary due to the deep penetration capability of the 14 MeV neutrons. A (D,T) neutron generator with a moderate output of around 1012 n/sec requires a concrete shielding of a wall thickness of 2 meters laterally and at the top of an experimental assembly. The cost for this biological shield may exceed the cost for most of the equipment for a fusion and/or hybrid experimental installation. Particularly, in Saudi Arabia, asphalt is very cheap and available in bulk quantities. As it is rich in hydrogen and carbon, it is worthwhile to investigate its shielding potential against fusion neutron. In the present work different biological shield configurations of asphalt at the wall of the experimental cavity for a research program being undertaken in Saudi Arabia, are investigated. The experimental cavity is approximated by a sphere of 5 meters radius. The yield of the neutron generator is taken as 1012 - 14 MeV - neutron/sec

  10. Discrete Element Simulation of Asphalt Mastics Based on Burgers Model

    Institute of Scientific and Technical Information of China (English)

    LIU Yu; FENG Shi-rong; HU Xia-guang

    2007-01-01

    In order to investigate the viscoelastic performance of asphalt mastics, a micro-mechanical model for asphalt mastics was built by applying Burgers model to discrete element simulation and constructing Burgers contact model. Then the numerical simulation of creep tests was conducted, and results from the simulation were compared with the analytical solution for Burgers model. The comparision snowed that the two results agreed well with each other, suggesting that discrete element model based on Burgers model could be employed in the numerical simulation for asphalt mastics.

  11. Characterization of asphalt materials containing bio oil from michigan wood

    Science.gov (United States)

    Mills-Beale, Julian

    The objective of this research is to develop sustainable wood-blend bioasphalt and characterize the atomic, molecular and bulk-scale behavior necessary to produce advanced asphalt paving mixtures. Bioasphalt was manufactured from Aspen, Basswood, Red Maple, Balsam, Maple, Pine, Beech and Magnolia wood via a 25 KWt fast-pyrolysis plant at 500 °C and refined into two distinct end forms - non-treated (5.54% moisture) and treated bioasphalt (1% moisture). Michigan petroleum-based asphalt, Performance Grade (PG) 58-28 was modified with 2, 5 and 10% of the bioasphalt by weight of base asphalt and characterized with the gas chromatography-mass spectroscopy (GC-MS), Fourier Transform Infra-red (FTIR) spectroscopy and the automated flocculation titrimetry techniques. The GC-MS method was used to characterize the Carbon-Hydrogen-Nitrogen (CHN) elemental ratio whiles the FTIR and the AFT were used to characterize the oxidative aging performance and the solubility parameters, respectively. For rheological characterization, the rotational viscosity, dynamic shear modulus and flexural bending methods are used in evaluating the low, intermediate and high temperature performance of the bio-modified asphalt materials. 54 5E3 (maximum of 3 million expected equivalent standard axle traffic loads) asphalt paving mixes were then prepared and characterized to investigate their laboratory permanent deformation, dynamic mix stiffness, moisture susceptibility, workability and constructability performance. From the research investigations, it was concluded that: 1) levo, 2, 6 dimethoxyphenol, 2 methoxy 4 vinylphenol, 2 methyl 1-2 cyclopentandione and 4-allyl-2, 6 dimetoxyphenol are the dominant chemical functional groups; 2) bioasphalt increases the viscosity and dynamic shear modulus of traditional asphalt binders; 3) Bio-modified petroleum asphalt can provide low-temperature cracking resistance benefits at -18 °C but is susceptible to cracking at -24 °C; 3) Carbonyl and sulphoxide

  12. Influence of conductive additive on temperature susceptibility of asphalt binders

    Institute of Scientific and Technical Information of China (English)

    吴少鹏; 李波; 陈筝; 黄旭

    2008-01-01

    The effects of graphite on temperature susceptibility of asphalt binders were investigated by penetration test,Ring & Ball softening point test and viscosity test.And penetration index(IP),viscosity-temperature susceptibility(SVT),and penetration-viscosity numbers(NPV) were introduced to evaluate the effects.The results show that the penetration,softening point and viscosity of asphalt binder increase with the increase of content of graphite.This means that the addition of graphite makes asphalts stiffer.The results from IP,NPV and SVT show that temperature susceptibility is reduced by the addition of graphite.

  13. A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility.

    Science.gov (United States)

    Polacco, Giovanni; Filippi, Sara; Merusi, Filippo; Stastna, George

    2015-10-01

    During the last decades, the number of vehicles per citizen as well as the traffic speed and load has dramatically increased. This sudden and somehow unplanned overloading has strongly shortened the life of pavements and increased its cost of maintenance and risks to users. In order to limit the deterioration of road networks, it is necessary to improve the quality and performance of pavements, which was achieved through the addition of a polymer to the bituminous binder. Since their introduction, polymer-modified asphalts have gained in importance during the second half of the twentieth century, and they now play a fundamental role in the field of road paving. With high-temperature and high-shear mixing with asphalt, the polymer incorporates asphalt molecules, thereby forming a swallowed network that involves the entire binder and results in a significant improvement of the viscoelastic properties in comparison with those of the unmodified binder. Such a process encounters the well-known difficulties related to the poor solubility of polymers, which limits the number of macromolecules able to not only form such a structure but also maintain it during high-temperature storage in static conditions, which may be necessary before laying the binder. Therefore, polymer-modified asphalts have been the subject of numerous studies aimed to understand and optimize their structure and storage stability, which gradually attracted polymer scientists into this field that was initially explored by civil engineers. The analytical techniques of polymer science have been applied to polymer-modified asphalts, which resulted in a good understanding of their internal structure. Nevertheless, the complexity and variability of asphalt composition rendered it nearly impossible to generalize the results and univocally predict the properties of a given polymer/asphalt pair. The aim of this paper is to review these aspects of polymer-modified asphalts. Together with a brief description of

  14. 信息动态%A Research on the Pavement Performance of Warm Mix Buton Mastic Asphalt

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Compositing modified asphalt mixture is a kind of asphalt mixture which uses Buton Mastic Asphalt(BMA) and warm modifier compound modification. It is proved that the composite modified asphalt mixture technology can greatly reduce the mixing temperature, save energy and protect the environment, and can guarantee good road performance. Employing Buton Mastic Asphalt as modifier can obviously increase the high temperature stability of asphalt mixture, with little impact on low temperature performance.

  15. Rutting Resistance of Asphalt Overlay with Multilayer Wheel Tracking Test

    Institute of Scientific and Technical Information of China (English)

    LIAO Weidong; CHEN Zheng; WU Shaopeng; MO Liantong; LIU Gang

    2006-01-01

    The rutting resistance of multilayer asphalt overlay was researched by using laboratory wheel tracking test. The effects of loading level and test temperature on rutting resistance of asphalt overlay structure were evaluated by means of multilayer specimens .In comparison with multilayer tests, standard specimens of various layers were also conducted to evaluate the rutting resistance. Experimental results indicated that the test temperature and applied load have a significant effect on rutting resistance of asphalt concrete. Higher test temperature and heavier applied load resulted in higher rut depths. In addition, the mutilayer wheel tracking test has been demonstrated to be a more reasonable solution in evaluation on rutting resistance of asphatt pavement structure beasuse it reflects the cumulative permanent deformation in all of asphalt layers.

  16. Performance Characterization of Polymer Modified Asphalt Binders and Mixes

    Directory of Open Access Journals (Sweden)

    Nikhil Saboo

    2016-01-01

    Full Text Available Fatigue sensitivity of four different asphalt binders and three different asphalt mixes was evaluated in the study. Binders were subjected to Linear Amplitude Sweep (LAS test at three temperatures of 10, 20, and 30°C. Four-point beam bending test (4PBBT was conducted on the asphalt mixes at a temperature of 20°C for strain amplitudes varying from 200 to 1000 microstrains. Tests like retained Marshall Stability and indirect tensile strength (ITS were also carried out to judge the mix performance. Experimental studies demonstrated that elastomeric modified binder and mixes gave the best performance in fatigue. Plastomeric modification was found to be highly strain susceptible and resulted in poor fatigue performance. The fatigue life of stone mastic asphalt (SMA was found to be almost five times higher than the dense graded mixes. For similar strain levels, the results of LAS test could be linearly correlated with the 4PBBT results.

  17. Storm Water General Permit 3 for Rock and Asphalt

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — General permit #3 for storm water discharges associated with industrial activity for Asphalt Plants, Concrete Batch Plants, Rock Crushing Plants and Construction...

  18. Effect of moisture on the aging behavior of asphalt binder

    Science.gov (United States)

    Ma, Tao; Huang, Xiao-Ming; Mahmoud, Enad; Garibaldy, Emil

    2011-08-01

    The moisture aging effect and mechanism of asphalt binder during the in-service life of pavement were investigated by laboratory simulating tests. Pressure aging vessel (PAV) test simulating the long-term aging of binder during the in-service life of pavement was modified to capture the long-term moisture aging effect of binder. Penetration grade tests including penetration test, soften point test, and ductility test as well as Superpave™ performance grade tests including viscosity test, dynamic shear rheometer test, and bending beam rheometer test were conducted to fully evaluate the moisture aging effect of binder. Fourier transform infrared spectroscopy test and Gel-permeation chromatography test were applied to provide a fundamental understanding of the moisture aging mechanism of binder. The results indicate that moisture condition can accelerate the aging of asphalt binder and shorten the service life of asphalt binder. The modified PAV test with moisture condition can well characterize the moisture aging properties of asphalt binder.

  19. Building Asphalt Pavement with SBS-based Compound Added Using a Dry Process in Greenland

    DEFF Research Database (Denmark)

    Lee, Hosin; Kim, Yongjoo; Geisler, Nivi;

    2009-01-01

    -based compound seemed to affect the asphalt mix to become more flexible under the heavy loads. By adding SBS-based compound to asphalt mixtures using a “dry” process, it is expected that the pavement would become more resistant to rutting than a typical asphalt mixture used in Greenland while enduring its arctic...... PMA where it is formulated to melt and blend with asphalt quickly during a batch mixing process. The main objectives of this study are to (1) build asphalt pavement using asphalt mixtures with SBS-based compound added using a “dry” process at the batch plant and (2) evaluate its performance under...

  20. THE EFFECT OF FLOOD CAUSED BY CLIMATE CHANGE TO POROUS ASPHALT PAVEMENT

    OpenAIRE

    Firdaus Chairuddin*, Wihardi Tjaronge

    2016-01-01

    The test Indirect Tensile Strength for asphalt quality 3%, 4%, 5% are 0.0673, 0.325, 0.2370 subsequently. Cantabro test, loss weight for asphalt quality 3%, 4%, 5% are 77.10, 14.56, 9.70 subsequently. Coefficient vertical test  permeability 0.1795  for asphalt  3%,  0.2029 for asphalt  4%, and 0.1596 for asphalt 5%, Unconfined Compressive Strength, Modulus elasticity 146.543 and ratio poisson 0.095831 for asphalt 3%, Modulus elasticity 91.450 and Ratio poisson 0.20600...

  1. Performance of Recycled Porous Hot Mix Asphalt with Gilsonite Additive

    OpenAIRE

    Ludfi Djakfar; Hendi Bowoputro; Bangun Prawiro; Nugraha Tarigan

    2015-01-01

    The objective of the study is to evaluate the performance of porous asphalt using waste recycled concrete material and explore the effect of adding Gilsonite to the mixture. As many as 90 Marshall specimens were prepared with varied asphalt content, percentage of Gilsonite as an additive, and proportioned recycled and virgin coarse aggregate. The test includes permeability capability and Marshall characteristics. The results showed that recycled concrete materials seem to have a potential...

  2. Modified rubberized stone matrix asphalt for Nineveh roads

    Institute of Scientific and Technical Information of China (English)

    Al-Hadidy AI; TAN Yi-qiu

    2008-01-01

    To evaluate the effects of Crumb Rubber Modifiers (CRMS) on basic engineering properties (i. e.Marshall, tensile strength, and compressive strength) of stone matrix asphalt mixtures, the ASTM testing and procedures were employed. Results of the evaluation were used to quantify the effect of CRM source and CRM content on engineering properties at testing temperatures of 25℃and 60℃. Statistical models were developed, which represent the nature of effects on performance-related properties of stone matrix asphalt mixtures.

  3. Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

    OpenAIRE

    2014-01-01

    Improving the compatibility between flame retardant and asphalt is a difficult task due to the complex nature of the materials. This study explores a low dosage compound flame retardant and seeks to improve the compatibility between flame retardants and asphalt. An orthogonal experiment was designed taking magnesium hydroxide, ammonium polyphosphate, and melamine as factors. The oil absorption and activation index were tested to determine the effect of titanate on the flame retardant additive...

  4. Mechanistic and Economical Characteristics of Asphalt Rubber Mixtures

    OpenAIRE

    Mena I. Souliman; Annie Eifert

    2016-01-01

    Load associated fatigue cracking is one of the major distress types occurring in flexible pavement systems. Flexural bending beam fatigue laboratory test has been used for several decades and is considered to be an integral part of the new superpave advanced characterization procedure. One of the most significant solutions to prolong the fatigue life for an asphaltic mixture is to utilize flexible materials as rubber. A laboratory testing program was performed on a conventional and Asphalt Ru...

  5. The temperature effect on the reflective cracking of asphalt overlays

    OpenAIRE

    Minhoto, Manuel; Pais, Jorge; Pereira, Paulo

    2008-01-01

    This paper presents a study about the influence of temperature on the reflective cracking in a flexible road pavement through the evaluation of the asphalt overlay damage associated to traffic and temperature variations throughout a year. This study was developed from a numerical simulation of the asphalt overlay behaviour based on a three-dimensional finite-element analysis, considering the simultaneous loading of traffic and temperature variations. A mechanistic-based overlay design method ...

  6. Effect of base bitumen composition on asphalt rubber binder properties

    OpenAIRE

    Partl, M.N.; Ould-Henia, M.; Dumont, A.-G.

    2008-01-01

    The asphalt rubber blend properties are strongly related to its base components properties. The base bitumen composition is considered as a key factor influencing the final rheological properties of asphalt rubber binder. This paper describes results from a laboratory investigation of the interaction between crumb rubber and different composition bitumen according to the wet process. The bitumen composition is determined according to the SARA decomposition approac...

  7. Asphalt in carbon-14-dated archaeological samples from Terqa, Syria

    International Nuclear Information System (INIS)

    The results are reported of an organic geochemical study to verify contamination in 14C dated archaeological samples, which could account for much older apparent ages than expected. The data indicate that ancient asphalt must be the source of contamination, showing that caution should be exercised, in interpreting 14C dates of archaeological samples from areas containing asphalt or other fossil fuel deposits. (U.K.)

  8. Asphalt Carriers from Kraljevica Shipyard – Constructional and Technological Aspects

    OpenAIRE

    Grubišić, R.

    2006-01-01

    After presenting the design development of the asphalt carrier Asphalt Seminole and her sister-ships in the article published in the previous issue of Brodogradnja (No. 1/2006), in this article the structural analysis made in the design stage and some constructional and technological specifities during the building stage are presented. Special emphasis is given to the presentation of the structional connection between the hull and the cargo tanks with the description of the elastic vertical s...

  9. Resistivity-temperature Characteristics of Conductive Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    SUN Wenzhou; LI Xu; YANG Qun; ZHANG Hongwei

    2016-01-01

    The changes of resistivity of conductive asphalt concrete at different temperatures were studied, and positive temperature coefficient (PTC) model was established to estimate the influence of temperature on the resistivity quantitatively, which eliminated the interference with conductivity evaluation brought by temperature variation. Finally, the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.

  10. DURABILITY OF ASPHALT CONCRETE MIXTURES USING DOLOMITE AGGREGATES

    Directory of Open Access Journals (Sweden)

    Imad Al-Shalout

    2015-12-01

    Full Text Available This study deals with the durability of asphalt concrete, including the effects of different gradations, compaction temperatures and immersion time on the durability potential of mixtures. The specific objectives of this study are: to investigate the effect of compaction temperature on the mechanical properties of asphalt concrete mixtures; investigate the effect of bitumen content and different aggregate gradations on the durability potential of bituminous mixtures.

  11. Effects of Fibers on the Dynamic Properties of Asphalt Mixtures

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The dynamic characteristics of fiber-modified asphalt mixture were investigated. Cellulose fiber, polyester fiber and mineral fiber were used as additives for asphalt mixture, and the dosage was 0.3%, 0.3%,0.4%, respectively. Dynamic modulus test using SuperPave simple performance tester (SPT) was conducted to study the dynamic modulus (E*) and phase angle (δ) for the control asphalt mixture and fiber-modified ones at various temperatures and frequencies. Experimental results show that all fiber-modified asphalt mixtures have higher dynamic modulus compared with control mixture. The dynamic modulus master curves of each type of asphalt mixtures are determined based on nonlinear least square regression in accordance with the timetemperature superposition theory at a control temperature (21.1 ℃). The fatigue parameter E*×sinδ and rutting parameter E*/sinδ of asphalt mixture are adopted to study the fatigue and rutting-resistance properties, and experimental results indicate that such properties can be improved by fiber additives.

  12. Application of Common Mid-Point Method to Estimate Asphalt

    Science.gov (United States)

    Zhao, Shan; Al-Aadi, Imad

    2015-04-01

    3-D radar is a multi-array stepped-frequency ground penetration radar (GPR) that can measure at a very close sampling interval in both in-line and cross-line directions. Constructing asphalt layers in accordance with specified thicknesses is crucial for pavement structure capacity and pavement performance. Common mid-point method (CMP) is a multi-offset measurement method that can improve the accuracy of the asphalt layer thickness estimation. In this study, the viability of using 3-D radar to predict asphalt concrete pavement thickness with an extended CMP method was investigated. GPR signals were collected on asphalt pavements with various thicknesses. Time domain resolution of the 3-D radar was improved by applying zero-padding technique in the frequency domain. The performance of the 3-D radar was then compared to that of the air-coupled horn antenna. The study concluded that 3-D radar can be used to predict asphalt layer thickness using CMP method accurately when the layer thickness is larger than 0.13m. The lack of time domain resolution of 3-D radar can be solved by frequency zero-padding. Keywords: asphalt pavement thickness, 3-D Radar, stepped-frequency, common mid-point method, zero padding.

  13. Reinforcement of Recycled Foamed Asphalt Using Short Polypropylene Fibers

    Directory of Open Access Journals (Sweden)

    Yongjoo Kim

    2013-01-01

    Full Text Available This paper presents the reinforcing effects of the inclusion of short polypropylene fibers on recycled foamed asphalt (RFA mixture. Short polypropylene fibers of 10 mm length with a 0.15% by weight mixing ratio of the fiber to the asphalt binder were used. The Marshall stability test, the indirect tensile strength test, the resilient modulus test, and wheel tracking test of the RFA mixtures were conducted. The test results were compared to find out the reinforcing effects of the inclusion of the fiber and the other mixtures, which included the conventional recycled foamed asphalt (RFA mixtures; the cement reinforced recycled foamed asphalt (CRFA mixtures; the semihot recycled foamed asphalt (SRFA mixtures; and recycled hot-mix asphalt (RHMA mixtures. It is found that the FRFA mixture shows higher Marshall stability than the RFA and SRFA mixtures, higher indirect tensile strength than the RFA mixture, and higher rut resistance than the RFA, SRFA, and RHMA mixtures as seen from the wheel tracking test.

  14. Rheological properties of asphalt mixtures containing various fibers

    Institute of Scientific and Technical Information of China (English)

    叶群山; 吴少鹏; 陈筝; 刘至飞

    2008-01-01

    Rheological characteristics of fiber-modified asphalt mixture were investigated.Cellulous fiber,polyester fiber and mineral fiber were used as additives for asphalt mixture,and the dosages were 0.3%,0.3%,0.4%,respectively.Dynamic modulus test using superpave simple performance tester(SPT) was adopted to study the dynamic modulus and phase angle for the control mixture and fiber-modified ones at various temperatures and frequencies.Test results show that the rheological properties can be improved significantly by the addition of various fibers.The dynamic modulus increases with the increase of frequency,and the phase angle decreases with the increase of frequency.When various fibers are used,the dynamic modulus increases and phase angle decreases at each frequency.This indicates that the stiffness and the elastic portion of fiber-modified asphalt mixtures can be enhanced when various fibers are used,which results in the change of viscoelastic properties of mixtures.The creep test results show that the total strain and the permanent strain of asphalt mixtures during load-unload cycle can be significantly reduced,which results in the improvement of resistance to permanent deformation for asphalt mixtures containing various fiber additives.The Burgers model can be employed effectively to illustrate the rheological properties of fiber modified asphalt mixtures.

  15. APPLICATION OF LOW TEMPERATU RE PROPERTIES IMPROVEMENT ASPHALT TO REPAIRE WORK OF RO CK FILL DAM WITH ASPHALT FACING

    Science.gov (United States)

    Shimazaki, Masaru; Tsunoo, Takashi; Kasahara, Atsushi

    The low temperature properties improvement asphalt that is no decreasing the transformation follow and the stress relaxation properties at the low temperature was developed. It aimed at properties of PG64-28 (lowest temperature 28 degree C and maximum temperature 64 degree C that was able to be used) from PG (Performance Grade) of mix design method SUPERPAVE (Superior Performance Pavement) of new road-building plan SHRP (Strategic Highway Research Program) in the United States when developing. When the repair work of the rock fill dam with asphalt facing located in Kyogoku-cho Abuta-gun Hokkaido was planned, the applicability of the developed asphalt was verified. As for the verification outcome and the developed asphalt, it was proven that it was applied to the repair construction, and there was no problem in manufacturing and construction.

  16. Replacement of asphalt in glass-mat roofing shingles. Final report, March 1980-March 1982

    Energy Technology Data Exchange (ETDEWEB)

    Bastian, E.J. Jr.; McCandlish, E.F.K.; Sieling, F.W.

    1982-05-01

    Up to 50% of the asphalt now used in glass-mat shingles may be replaceable by increasing the mineral filler content and/or extending the asphalt with elemental sulfur. Highly filled, lab-made shingles containing asphalt flux perform acceptably in fire tests, slide tests, blister tests, granule adhesion, and freeze-thaw cracking tests. They have high stain and scuff potential and are too limp for convenient application around 110/sup 0/F. Lab-made shingles containing asphalt saturant are satisfactory in most respects, but they are still too limp for high temperature application. Various methods to stiffen highly filled shingles were tried. The most promising method is the use of two lightweight glass mats, laminated together with asphalt. Shingles made in this way have handling properties superior to conventional shingles and are economically feasible. In the area of replacement of asphalt with sulfur, five small-scale plant trials produced shingles which, after a year of outdoor exposure, are satisfactory. On the basis of preliminary measurements, no important difference in tensile or flexural properties between asphalt and sulfur/asphalt shingles is expected. In Weather-Ometer tests, sulfur/asphalt tends to have lower durability than conventional coating. This is confirmed by outside weathering of sulfur/asphalt films. By choosing the correct asphalt softening point and correct filler level, sulfur/asphalt/filler can have equal durability to conventional asphalt/filler combinations.

  17. Professionalising the asphalt construction process: aligning information technologies, operators' knowledge and laboratory practices

    NARCIS (Netherlands)

    Bijleveld, Frank Roland

    2015-01-01

    This research addresses the need to professionalise the asphalt construction process. A distinctive action research strategy is designed and carried out to progressively improve operational strategies of asphalt teams from technological, human (operator) and laboratory perspectives. Using informatio

  18. The Effect of Joint Width on Structural Performance of Asphalt Block Pavements

    Directory of Open Access Journals (Sweden)

    Ahmed Abdelgalil

    2014-02-01

    Full Text Available Asphalt blocks have been occasionally used around the world as a road pavement, but there have been very limited studies being done to evaluate the effect of joint width (spacing between the blocks on the structural performance of asphalt paving blocks. This study explains the experimental study to assess the performance and properties of asphalt paving blocks laid with different joint widths between the blocks i.e., 0, 2 and 3 mm, respectively. A total of 250 asphalt paving blocks was manufactured and tested in the laboratory to ascertain the density, air voids, the compressive strength and the rut depth and displacement occurred in asphalt paving block. The design compressive load of single asphalt paving block is 166 kN. The test results showed that the joint width plays a vital role on the performance of asphalt block pavement. Asphalt paving blocks were laid as closely in contact as possible (0 mm yields the best structural performance.

  19. The road that's taken : Alberta's bitumen and the world of asphalt

    International Nuclear Information System (INIS)

    Approximately one third of the bitumen produced by the oil sands industry in Canada is used as asphalt in roads and roofing materials. Crude oils used for asphalt production require very little refining. The asphalt market has become a key profit centre for some Cold Lake operators. Imperial Oil has established a research centre devoted to asphalt production at its Sarnia-based refinery. A decline in heavy oil supplies from Mexico and Venezuela has left Canada with a larger margin of the asphalt market. Industry leaders predict that demand for asphalt products will grow by 2.6 per cent per year. A sharp increase in asphalt prices led to many construction delays in 2007. Trials are now being conducted on a new warm mix paving technology that allows users to lower the temperature of asphalt by 20 to 30 degrees C when paving. 2 figs

  20. Physico-mechanical properties of asphalt concrete based on road bitumen modified by rapeseed oil epoxide

    OpenAIRE

    Nykypanchuk, Mykhailo; Hrynchuk, Yurii; Olchovyk, Mykola

    2013-01-01

    The investigation results of type B fine asphalt concrete and its form modified by rapeseed oil epoxide are represented. The efficiency of ERO addition and its positive effect on the physico-mechanical properties of asphalt concrete has been established.

  1. Asphalt Roofing Shingles Into Energy Project Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, Rex, PE

    2008-04-28

    Based on a widely cited September, 1999 report by the Vermont Agency of Natural Resources, nearly 11 million tons of asphalt roofing shingle wastes are produced in the United States each year. Recent data suggests that the total is made up of about 9.4 million tons from roofing tear-offs and about 1.6 million tons from manufacturing scrap. Developing beneficial uses for these materials would conserve natural resources, promote protection of the environment and strengthen the economy. This project explored the feasibility of using chipped asphalt shingle materials in cement manufacturing kilns and circulating fluidized bed (CFB) boilers. A method of enhancing the value of chipped shingle materials for use as fuel by removing certain fractions for use as substitute raw materials for the manufacture of new shingles was also explored. Procedures were developed to prevent asbestos containing materials from being processed at the chipping facilities, and the frequency of the occurrence of asbestos in residential roofing tear-off materials was evaluated. The economic feasibility of each potential use was evaluated based on experience gained during the project and on a review of the well established use of shingle materials in hot mix asphalt. This project demonstrated that chipped asphalt shingle materials can be suitable for use as fuel in circulating fluidized boilers and cement kilns. More experience would be necessary to determine the full benefits that could be derived and to discover long term effects, but no technical barriers to full scale commercial use of chipped asphalt shingle materials in these applications were discovered. While the technical feasibility of various options was demonstrated, only the use of asphalt shingle materials in hot mix asphalt applications is currently viable economically.

  2. Study on Process for Manufacturing Heavy Traffic Asphalt from Gudong Crude

    Institute of Scientific and Technical Information of China (English)

    Wang Zijun; Long Jun; She Yucheng

    2004-01-01

    The Gudong crude from Gudao oil-bearing region in the Shengli oilfield was used as the target for studying the process of manufacturing heavy traffic road asphalt. The heavy traffic road asphalt products can be made from Gudong crude through blending residuum from mild thermal conversion of vacuum resid with extract, blending the deoiled asphalt from VR propane deasphalting with vacuum resid and the extract, and blending of oxidizedhard asphalt originated from VR with the extract.

  3. Optimization of asphalt rubber hot mixes based on performance laboratory tests

    OpenAIRE

    Neto, Silvrano Adonias Dantas; Farias, Márcio Muniz de; Pais, Jorge C.; Pereira, Paulo A. A.

    2003-01-01

    Asphalt binders modified with crumb rubber recycled from ground tires have been successfully used in asphalt mixtures improving the mechanical and functional behaviour of the pavements. This paper shows the influence of several factors that affect the behaviour of asphalt-rubber (AR) and of hot mixes made with this material. Modified binders were prepared using a straight binder with 35/50 penetration and rubber obtained by the environmental process. Samples of asphalt-rubber w...

  4. Visualizing asphalt roller trajectories in context: acquiring, processing, and representing sensor readings

    OpenAIRE

    Vasenev, Alexandr Nikolajevitsj

    2015-01-01

    The asphalt compaction process relies heavily on the skills and knowledge of roller operators who act alongside other stakeholders involved in asphalt paving. It is essential that these construction specialists: (1) are adequately informed about the initial temperature distribution of the asphalt layer – an essential context factor of asphalt compaction; and (2) have the possibility to improve their knowledge by reflecting on the already-conducted and alternative compaction strategies. Both t...

  5. SGC Tests for Influence of Material Composition on Compaction Characteristic of Asphalt Mixtures

    OpenAIRE

    Qun Chen; Yuzhi Li

    2013-01-01

    Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture) was studied using Superpave gyratory compactor (SGC) simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show that, for the mixture with a bigger content of asphalt, its density increases faster, that there is a...

  6. Research on the relationship between water stability and aggregate gradation of asphalt pavement

    OpenAIRE

    Zhao Bing; Zhao Bo

    2015-01-01

    In the early destruction of asphalt pavement, water damage is the most major form.In this paper, experimental study was conducted on the composition of asphalt concrete,Marshall specimens were made in different types of aggregate gradation with the same kind of asphalt. Water immersion tests were conducted in order to analysis the relationship between the water stability and aggregate gradation of asphalt pavement.

  7. TECHNOLOGY OF DISPERSED REINFORCEMENT OF ASPHALT CONCRETE MIXTURES WITH CHRYSOTILE FIBRES

    OpenAIRE

    S. I. Buldakov; A. Yu. Dedyukhin

    2010-01-01

    Problem statement. The issues of technology of preparation of dispersed rein-forced asphalt concrete mixtures are still not clearly understood. Available tech-nologies of dispersed reinforcement involve application of granulated additives, which permits the quality of asphalt concrete mixtures to be improved and, there-fore, it will result in increasing life expectancy of asphalt concrete pavements.Results and conclusions. The ways of improvement of quality and durability of asphalt-concrete ...

  8. Design of open graded friction courses with sulfur extended asphalt binders

    Science.gov (United States)

    Saylak, D.; Ho, K. K.; Gallaway, B. M.; Little, D. N.

    1982-09-01

    The combination of the anticipated shortage of asphalt cement and the projected abundance of sulfur has led to the investigation of the potential for substituting this element for the former in the paving industry. Sulfur was incorporated with asphalt to form sulfur-extended asphalt (SEA) binders for use in open graded friction course mixtures. The experimental design variable included aggregated type, asphalt cement, level of sulfur contents in the binder and method of preparing SEA binders.

  9. Survey of microbial degradation of asphalts with notes on relationship to nuclear waste management

    International Nuclear Information System (INIS)

    A survey has been made of the microbial degradation of asphalts. Topics covered include chemical and physical properties of asphalts, their chemical stability, methods of demonstrating their microbial degradation, and environmental extremes for microbial activity based on existing literature. Specific concerns for the use of asphalt in nuclear waste management, plus potential effects and consequences thereof are discussed. 82 references

  10. Preparation and Performance of Asphalt Compound Modified with Waste Crumb Rubber and Waste Polyethylene

    Directory of Open Access Journals (Sweden)

    Yuqiao Yang

    2016-01-01

    Full Text Available Three kinds of modified asphalt were prepared by adding waste crumb rubber (WCR, waste polyethylene (WPE, and WCR/WPE to base asphalt, respectively. The influence of different doses on the performance of modified asphalt, such as 25°C penetration, softening point, 5°C ductility, and 135°C, 165°C viscosity, was studied, and the modification mechanism of modified asphalt was discussed through the fluorescence microscope. As the waterproofing materials, the waterproofness of WCR/WPE compound modified asphalt was tested. The results show that the WPE modified asphalt has excellent resistance to high temperature and WCR modified asphalt has good low temperature resistance. The resistance to deformation ability of WPE modified asphalt is better than that of the WCR modified asphalt. The 135°C viscosity of compound modified asphalt is better than that of WPE and WCR modified asphalt. In addition, the waterproofness of compound modified asphalt using waterproofing materials is better than that of common waterproofing materials.

  11. ASPHALT FOR OFF-STREET PAVING AND PLAY AREAS, 3RD EDITION.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    THIS PAMPHLET DISCUSSES THE ALTERNATIVE METHODS, APPLICATIONS, AND TECHNICAL CONSIDERATIONS FOR OFF-STREET PAVING AND PLAY AREAS. OFF-STREET PAVING INCLUDES--(1) ASPHALT-PAVED PARKING AREAS, (2) ROOF DECK PARKING AREAS, (3) ASPHALT-PAVED DRIVEWAYS, (4) ASPHALT-PAVED SERVICE STATION LOTS, AND (5) SIDEWALKS. THE DISCUSSION OF PLAY AREAS…

  12. On the representative volume element of asphalt concrete at low temperature

    Science.gov (United States)

    Marasteanu, Mihai; Cannone Falchetto, Augusto; Velasquez, Raul; Le, Jia-Liang

    2016-08-01

    The feasibility of characterizing asphalt mixtures' rheological and failure properties at low temperatures by means of the Bending Beam Rheometer (BBR) is investigated in this paper. The main issue is the use of thin beams of asphalt mixture in experimental procedures that may not capture the true behavior of the material used to construct an asphalt pavement.

  13. Specifications and Construction Methods for Asphalt Concrete and Other Plant-Mix Types, 3rd Edition.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The purpose of this publication is to assist engineers in the analysis, design and control of paving projects that use asphalt concrete and other asphalt plant-mixes. The scope of this new third edition has been enlarged, and changes necessitated by advances in asphalt technology have been incorporated. Chapters I and II and Appendices A and B…

  14. 40 CFR Table 2 of Subpart Aaaaaaa... - Emission Limits for Asphalt Roofing Manufacturing (Coating) Operations

    Science.gov (United States)

    2010-07-01

    ... Manufacturing (Coating) Operations 2 Table 2 of Subpart AAAAAAA of Part 63 Protection of Environment... Pollutants for Area Sources: Asphalt Processing and Asphalt Roofing Manufacturing Other Requirements and... AAAAAAA of Part 63—Emission Limits for Asphalt Roofing Manufacturing (Coating) Operations For * * *...

  15. Image analysis of aggregate,mastic and air void phases for asphalt mixture%Image analysis of aggregate, mastic and air void phases for asphalt mixture

    Institute of Scientific and Technical Information of China (English)

    ADHIKARI Sanjeev; YOU Zhan-ping; HAO Pei-wen; WANG Hai-nian

    2013-01-01

    The shape characterization and spatial distribution of aggregate,mastic and air void phases for asphalt mixture were analyzed.Three air void percentage asphalt mixtures,4%,7% and 8%,respectively,were cut into cross sections and polished.X-ray scanning microscope was used to capture aggregate,mastic,air void phase by the image.The average of polygon diameter was chosen as a threshold to determine which aggregates would be retained on a given sieve.The aggregate morphological image from scanned image was utilized by digital image processing method to calculate the gradation of aggregate and simulate the real gradation.Analysis result shows that the air void of asphalt mixture has influence on the correlation between calculation gradation and actual gradation.When comparing 4.75 mm sieve size of 4%,7% and 8% air void asphalt mixtures,7% air void asphalt mixture has 55% higher than actual size gradation,8% air void asphalt mixture has 8% higher than actual size gradation,and 4% air void asphalt mixture has 3.71% lower than actual size gradation.4% air void asphalt mixture has the best correlation between calculation gradation and actual gradation comparing to other specimens.The air void percentage of asphalt mixture has no obvious influence on the air void orientation,and three asphalt mixtures show the similar air orientation along the same direction.4 tabs,7 figs,17 refs.

  16. UTILIZATION OF WASTE PLASTIC BOTTLES IN ASPHALT MIXTURE

    Directory of Open Access Journals (Sweden)

    TAHER BAGHAEE MOGHADDAM

    2013-06-01

    Full Text Available Nowadays, large amounts of waste materials are being produced in the world. One of the waste materials is plastic bottle. Generating disposable plastic bottles is becoming a major problem in many countries. Using waste plastic as a secondary material in construction projects would be a solution to overcome the crisis of producing large amount of waste plastics in one hand and improving the structure’s characteristics such as resistance against cracking on the other hand. This study aimed to investigate the effects of adding plastic bottles in road pavement. Marshall properties as well as specific gravity of asphalt mixture containing different percentages of plastic bottles were evaluated. Besides, Optimum Asphalt Content (OAC was calculated for each percentages of plastic bottles used in the mix. The stiffness and fatigue characteristics of mixture were assessed at OAC value. Results showed that the stability and flow values of asphalt mixture increased by adding waste crushed plastic bottle into the asphalt mixture. Further, it was shown that the bulk specific gravity and stiffness of mixtures increased by adding lower amount of plastic bottles; however, adding higher amounts of plastic resulted in lower specific gravity and mix stiffness. In addition, it was concluded that the mixtures containing waste plastic bottles have lower OAC values compared to the conventional mixture, and this may reduce the amount of asphalt binder can be used in road construction projects. Besides, the mixtures containing waste plastic showed significantly greater fatigue resistance than the conventional mixture.

  17. Recovery and reuse of asphalt roofing waste. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Desai, S.; Graziano, G.; Shepherd, P.

    1984-02-02

    Burning of asphalt roofing waste as a fuel and incorporating asphalt roofing waste in bituminous paving were identified as the two outstanding resource recovery concepts out of ten studied. Four additional concepts might be worth considering under different market or technical circumstances. Another four concepts were rated as worth no further consideration at this time. This study of the recovery of the resource represented in asphalt roofing waste has identified the sources and quantities of roofing waste. About six million cubic yards of scrap roofing are generated annually in the United States, about 94% from removal of old roofing at the job site and the remainder from roofing material production at factories. Waste disposal is a growing problem for manufacturers and contractors. Nearly all roofing waste is hauled to landfills at a considerable expense to roofing contractors and manufacturers. Recovery of the roofing waste resource should require only a modest economic incentive. The asphalt contained in roofing waste represents an energy resource of more than 7 x 10/sup 13/ Btu/year. Another 1 x 10/sup 13/ Btu/year may be contained in field-applied asphalt on commercial building roofs. The two concepts recommended by this study appear to offer the broadest applicability, the most favorable economics, and the highest potential for near-term implementation to reuse this resource.

  18. Aging test results of an asphalt membrane liner

    International Nuclear Information System (INIS)

    The objective of the asphalt aging study described in this report was to determine the expected performance lifetime of a catalytically airblown asphalt membrane as a seepage barrier for inactive uranium mill tailings. The study, conducted by Pacific Northwest Laboratory for the Department of Energy's Uranium Mill Tailings Remedial Action Program, showed through chemical compatibility tests that the asphalt membrane is well suited for this purpose. The chemical compatibility tests were designed to accelerate the aging reactions in the asphalt and to determine the accelerated aging effect. Higher temperatures and oxygen concentrations proved to be effective acceleration parameters. By infrared spectral analysis, the asphalt was determined to have undergone 7 years of equivalent aging in a 3-month period when exposed to 400C and 1.7 atm oxygen pressure. However, the extent of aging was limited to a maximum penetration of 0.5% of the total liner thickness. It was concluded that the liner could be expected to be effective as a seepage barrier for at least 1000 years before the entire thickness of the liner would be degraded

  19. Hanford Protective Barriers Program asphalt barrier studies -- FY 1988

    International Nuclear Information System (INIS)

    The Hanford Protective Barrier (HPB) Program is evaluating alternative barriers to provide a means of meeting stringent water infiltration requirements. One type of alternative barrier being considered is an asphalt-based layer, 1.3 to 15 cm thick, which has been shown to be very effective as a barrier for radon gas and, hence, should be equally effective as a barrier for the larger molecules of water. Fiscal Year 1988 studies focused on the selection and formulation of the most promising asphalt materials for further testing in small-tube lysimeters. Results of laboratory-scale formulation and hydraulic conductivity tests led to the selection of a rubberized asphalt material and an admixture of 24 wt% asphalt emulsion and concrete sand as the two barriers for lysimeter testing. Eight lysimeters, four each containing the two asphalt treatments, were installed in the Small Tube Lysimeter Facility on the Hanford Site. The lysimeter tests allow the performance of these barrier formulations to be evaluated under more natural environmental conditions

  20. An Approach for Nonlinear Fatigue Damage Evaluation in Asphalt Pavements

    Science.gov (United States)

    Rajbongshi, Pabitra; Thongram, Sonika

    2016-08-01

    Fatigue due to vehicular loads is one of the primary distress mechanisms in asphalt pavements. It happens primarily due to deterioration in asphalt material with load repetitions. Degradation of asphalt material may be evaluated using different parameters. In view of degradation, the incremental damage in a given pavement section would be different for different repetitions, even with same loadings. Therefore, the damage progression becomes nonlinear with repetitions. Accounting such nonlinearity in damage accumulation, and based on different damage evaluation parameters, this paper presents an equivalent approach for fatigue damage evaluation in asphalt pavements. Traditional fatigue equation adopted in mechanistic-empirical pavement design has been used in the present work. Four different criteria, namely number of load repetitions, asphalt stiffness reduction, strain enhancement and fatigue life reduction with repetitions are considered for damage estimation. The proposed approach could estimate same value of nonlinear damage, irrespective of the criteria used. The simplest form of criterion i.e. the number of load repetitions can be used for fatigue performance evaluation. Probabilistically, the damage propagation is also correlated and assessed with the failure probability.

  1. Application of asphalt rubber technology to recreational trails

    Science.gov (United States)

    Ni, Haifeng

    Crumb rubber aggregate was employed instead of stone/sand aggregate in asphalt pavement that was modified by fine rubber particles. Crumb rubber aggregate forms an elastic network in the asphalt, which improves the pavement's susceptibility to low-temperature cracking, and absorb more stress at the crack tips than the conventional asphalt pavement. Laboratory tests were conducted to evaluate the tension/compression performance of a blend of asphalt rubber with rubber aggregate (ARRA). An optimum design methodology was introduced by examining the effect of asphalt source, curing temperature, curing time, rubber content, aggregate size, compaction pressure, and the effect of certain additives. At ambient temperature, the ARRA with equal amount of binder and aggregate exhibits good mechanical properties. Vestenamer helps improve the pavement's strength, stiffness, and fracture resistance to low temperature cracking. It was demonstrated that such pavement meets the mechanical requirements for recreational trails, such as bicycle, or pedestrian trails. ARRA is a viscoelastic material which exhibits time-dependent and loading rate-dependent behavior. Temperature is a key issue to its response to an external load. Both temperature and rate dependences were investigated. A series of uniaxial compression relaxation tests on ARRA or Vestenamer modified ARRA were conducted at room temperature to study the time-dependent performance of ARRA. Schapery's theory was applied to characterize the nonlinear viscoelastic behavior of ARRA.

  2. European experience with asphalt packaging of radioactive wastes

    International Nuclear Information System (INIS)

    In Europe, the use of asphalt is synonymous with volume reduction of low and medium level radioactive waste. It started at Marcoule, France in the early 1960's and soon was adopted by Karlsruhe in West Germany, Eurochemic in Belgium, and in other countries. The use of an asphalt (or bitumen) binder, or immobilizing agent, in the VRS (Volume Reduction and Solidification) process proved to be beneficial in many ways. At Karlsruhe, for example, the VRS asphalt system replaced a cement system (non-volume reducing) and resulted in two drums of solidified waste versus ten with cement. This process reduced the transportation problem considerably. Asphalt is an inert, waterproof material and provides significantly improved package integrity under all conditions of on-site storage, transportation, and burial. The asphalt VRS system provides considerable cost savings, particularly for the recurring items such as binder, containers, transportation, and burial. These annual savings may approach $500,000 annually for a 1000 MWe nuclear plant. End product advantages include higher resistance to leaching and other environmental impacts, as well as less internal corrosion of the drums

  3. Determination of Rheological Properties of Bio Mastic Asphalt

    Directory of Open Access Journals (Sweden)

    R. Muniandy

    2008-01-01

    Full Text Available Due to the high oil prices the price of asphalt binder has increased tremendously. This scenario has warranted demand for higher viscosity cheaper asphalt for pavement construction. A study was conducted to take advantage of the Empty Fruit Bunch (EFB of Date and Oil Palm trees (which are considered as waste to produce cellulose fiber to be used as additives in the asphalt binder. If these EFB's could be beneficially utilized in any application, it would reduce the load on the nation's landfills and at the same time reducing the cost of road construction. A total of 11 blends were prepared that consisted of 5 blends with date palm fiber, 5 blends with oil palm fiber and one control sample that contained no fibers. The samples were evaluated using Dynamic Shear Rheometer (DSR equipment in accordance with the superpave Strategic Highway Research Program (SHRP requirements. The neat asphalt binders (Unaged, Rolling Thin Film Oven (RTFO aged and Pressure Ageing Vessel (PAV samples were then measured for phase angle, shear strain and complex shear modulus and then evaluated in accordance with SHRP requirements. The results indicated that the fibers enhanced the rheological performance of Bio Mastic Asphalt (BMA blends. The control sample which was categorized as PG58 was enhanced to PG76 with 0.375% date palm fiber. The oil palm has also improved the blend up to PG70 with 0.3% oil palm fiber.

  4. Tetrapyrroles and associated compounds in Dead Sea asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Aizenshtat, Z. (Hebrew Univ. of Jerusalem, Israel); Dinur, D.; Nissenbaum, A.

    1979-01-01

    Metallo- and free porphyrins (1000 to 1500 ppM) isolated from asphalts occurring as huge blocks floating in the northern part of the Dead Sea, have been analyzed by visible-uv (v-uv) spectrophotometry and by mass spectrometry. The concentration of vanadyl porphyrins in the asphalts exceeds by far that of the Ni-porphyrins, despite the l:3 V/Ni ratio found in the total asphalt sample. The free porphyrins resemble those from the Uinta Basin (USA) gilsonite and contain a mixture of homologous Aetio- and deoxyphyllo-erythroaetioporphyrins (DPEP). The non-porphyrin fraction of the asphalt showed an identical aliphatic, hydrocarbon distribution with that of heavy crude oil from the same area. The more polar fraction associated with the porphyrins was compared with the polar fraction of the previously described ozokerite from the Dead Sea area. From high-resolution MS, IR, v-uv and NMR spectra, combined with hydrolysis and GLC analysis, it is suggested that even-numbered (C/sub 12/, C/sub 16/, C/sub 18/, C/sub 18/ /sub 1/, C/sub 22/) fatty acids are associated with the asphaltic porphyrins, probably in the triglyceride form.

  5. Performance evaluation of high modulus asphalt concrete mixes

    Science.gov (United States)

    Haritonovs, V.; Tihonovs, J.; Zaumanis, M.

    2016-04-01

    Dolomite is one of the most available sedimentary rocks in the territory of Latvia. Dolomite quarries contain about 1000 million tons of this material. However, according to Latvian Road Specifications, this dolomite cannot be used for average and high intensity roads because of its low quality (mainly, LA index). Therefore, mostly imported magmatic rocks (granite, diabase, gabbro, basalt) or imported dolomite are used which makes asphalt expensive. However, practical experience shows that even with these high quality materials roads exhibit rutting, fatigue and thermal cracks. The aim of the research is to develop a high performance asphalt concrete for base and binder courses using only locally available aggregates. In order to achieve resistance against deformations at a high ambient temperature, a hard grade binder was used. Workability, fatigue and thermal cracking resistance, as well as sufficient water resistance is achieved by low porosity (3-5%) and higher binder content compared to traditional asphalt mixtures. The design of the asphalt includes a combination of empirical and performance based tests, which in laboratory circumstances allow simulating traffic and environmental loads. High performance AC 16 base asphalt concrete was created using local dolomite aggregate with polymer modified (PMB 10/40-65) and hard grade (B20/30) bitumen. The mixtures were specified based on fundamental properties in accordance to EN 13108-1 standard.

  6. STATE OF TRANSPORT PROCESSES FOR REPAIRING AND ASPHALTING OF ASPHALT ROADS AND WAYS THEIR DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Nikolaev N. N.

    2015-04-01

    Full Text Available The article explains the importance of the transport process when performing repair jobs of asphalt roads. The scheme of the technological process was drawn up; job steps were identified, while the latter may be characterized by non-productive downtime of transport as well as that one of technological machines. We have analyzed the following steps of the flowchart of the road concrete mix transportation: the preparation of the road concrete mix for transportation, loading, transportation, unloading, laying and packing. The transportation of goods starts at the working site of their production and ends at the site of their consumption. The transportation process is a multistep and multioperational process having the greater diversity of technological, operational and economic operations, which must be correctly organized. It is extremely important to deliver the road concrete mix of coating plant (OP just in time, while avoiding the unproductive idle standing of the equipment, the deterioration of the mixture, as well as performing the job steps at minimum transportation cost savings. The successful combining of the steps of the concept organization of the road concrete mix transportation (coating plant, asphalt laying step, transportation step will improve the performance and will provide the reduction of the job cost. One must perform the coordination of job steps on different road sections using information technologies and communication facility

  7. Production of De-asphalted Oil and Fine Asphalt Particles by Supercritical Extraction

    Institute of Scientific and Technical Information of China (English)

    赵锁奇; 许志明; 王仁安

    2003-01-01

    A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0kg.h-1 was setup to extract petroleum residue by pentane to obtain more oil for further upgrading. A discharging system integrated to the bottom of the extractor was used to recover solvent as gas while asphalt was obtained as fine particles. The influence of operating conditions on the yield and quality of extracts, i.e., deasphalted oil (DAO) and resin, was studied in the range of temperature 150-220℃, pressure of 4.0-6.0 MPa and the mass ratio of solvent to oil feed (S/O) 2.5-5.0. The particle size distribution, apparent forms and the packing density, which vary with operating pressure, were measured. The particle structures were observed by SEM as well. With the modification to conventional processes, furnace can be eliminated for solvent recovery from asphalt phase, so as to reduce energy consumption.

  8. A pulsed-and high resolution-NMR study of the asphalt compositions obtained by the composition analytical method

    International Nuclear Information System (INIS)

    12 Kinds of asphalts were fractionated by the usual composition analytical method to give asphaltenes, maltenes, and waxy substances. Their contents show fairly good relationships with softening temperatures, and 1/T2 values of asphalts. Pulsed- and high resolution-NMR measurements were made of the fractions of 8 asphalts out of 12 asphalts. Asphaltenes from all the asphalts were thought to have almost same structures and characters (T2 asymptotically equals μsec), and their contents vary with the asphalts. Maltenes had no characteristic structures owing to the imperfect fractionation employed in this study, and their content in the asphalt is the largest. (author)

  9. The effect of aggregate density on pavement performance of SMA-13 asphalt mixture

    Directory of Open Access Journals (Sweden)

    Qiao Yinping

    2016-05-01

    Full Text Available This paper chooses the top layer SMA-13 asphalt mixture material as the research object. Basalt was selected as pavement material, and modified SBS asphalt was used as a cementing material. Two basalt aggregates with different densities were used to carry out standard Marshall test in the laboratory.Aimed at the volume parameters of the asphalt mixture carry on anaiysis,and obtian the effect of aggregate density on pavement performance of SMA-13 asphalt mixture, which is that the density of aggregate has a significant effect on the void ratio, saturation, and the gap rate of the aggregate, thus affecting the pavement performance of the asphalt mixture

  10. Hanford Permanent Isolation Barrier Program: Asphalt technology test plan

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.

    1994-05-01

    The Hanford Permanent Isolation Barriers use engineered layers of natural materials to create an integrated structure with backup protective features. The objective of current designs is to develop a maintenance-free permanent barrier that isolates wastes for a minimum of 1000 years by limiting water drainage to near-zero amounts. Asphalt is being used as an impermeable water diversion layer to provide a redundant layer within the overall barrier design. Data on asphalt barrier properties in a buried environment are not available for the required 100-year time frame. The purpose of this test plan is to outline the activities planned to obtain data with which to estimate performance of the asphalt layers.

  11. Asphalt emulsion sealing of uranium mill tailings. 1980 annual report

    International Nuclear Information System (INIS)

    Studies of asphalt emulsion sealants conducted by the Pacific Northwest Laboratory have demonstrated that the sealants are effective in containing radon and other potentially hazardous material within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to near background levels. Field tests at the tailings pile in Grand Junction, Colorado, confirmed that an 8-cm admix seal containing 22 wt% asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and compacted, overburden was applied over the seal to protect the seal from ultraviolet degradation

  12. Deformation Parameters and Fatigue of the Recycled Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Šrámek Juraj

    2015-12-01

    Full Text Available The deformational properties of asphalt mixtures measured by dynamic methods and fatigue allow a design the road to suit the expected traffic load. Quality of mixtures is also expressed by the resistance to permanent deformation. Complex modulus of stiffness and fatigue can reliably characterize the proposed mixture of asphalt pavement. The complex modulus (E* measurement of asphalt mixtures are carried out in laboratory of Department of Construction Management at University of Žilina by two-point bending test method on trapezoid-shaped samples. Today, the fatigue is verified on trapezoid-shaped samples and is assessed by proportional strain at 1 million cycles (ε6. The test equipment and software is used to evaluate fatigue and deformation characteristics.

  13. Nuclear asphalt content gauge study. Research report (Final)

    International Nuclear Information System (INIS)

    This research ascertains if the Troxler Model 3241 Gauge could accurately determine the asphalt content of bituminous-concrete mixtures by nuclear means. The study was divided into three phases. Phase I was conducted in the Central Laboratory where a series of controlled tests were performed for variables that may effect the gauge's asphalt-content determinations. Phase II evolved into a cooperative study between the Maryland State Highway Administration (SHA) and several bituminous concrete producers. Phase III was to report the findings of the study and make a recommendation on the overall practical application of the gauge. The results indicate that the gauge can accurately determine asphalt contents on normal surface and base bituminous mixtures

  14. Application of asphalt emulsion seals to uranium mill tailings

    International Nuclear Information System (INIS)

    Studies of asphalt emulsion sealants have demonstrated that the sealants are effective in containing radon and other potentially hazardous material within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to less than background levels. Field tests at the tailings pile in Grand Junction, Colorado confirmed that an 8-cm admix seal containing 22 wt % asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and conpacted, overburden was applied over the seal to protect the seal from ultraviolet degradation. 14 figures

  15. Investigation of Asphalt Mixture Creep Behavior Using Thin Beam Specimens

    International Nuclear Information System (INIS)

    The asphalt pavement layer consists of two or more lifts of compacted asphalt mixture; the top of the layer is also exposed to aging, a factor that significantly affects the mixture properties. The current testing specifications use rather thick specimens that cannot be used to investigate the gradual change in properties with pavement depth. This paper investigates the feasibility of using the 3-point bending test with thin asphalt mixture beams (127x12.7x6.35 mm) to determine the low-temperature creep compliance of the mixtures. Several theoretical and semi-empirical models, from the theory of composites, are reviewed and evaluated using numerical and experimental data. Preliminary results show that this method can be used for low-temperature mixture characterization but several crucial factors need further inspection and interpretation

  16. Hanford Permanent Isolation Barrier Program: Asphalt technology test plan

    International Nuclear Information System (INIS)

    The Hanford Permanent Isolation Barriers use engineered layers of natural materials to create an integrated structure with backup protective features. The objective of current designs is to develop a maintenance-free permanent barrier that isolates wastes for a minimum of 1000 years by limiting water drainage to near-zero amounts. Asphalt is being used as an impermeable water diversion layer to provide a redundant layer within the overall barrier design. Data on asphalt barrier properties in a buried environment are not available for the required 100-year time frame. The purpose of this test plan is to outline the activities planned to obtain data with which to estimate performance of the asphalt layers

  17. Asphalt emulsion sealing of uranium mill tailings. 1980 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, J.N.; Koehmstedt, P.L; Esterl, D.J.; Freeman, H.D.; Buelt, J.L.; Nelson, D.A.; Elmore, M.R.

    1981-05-01

    Studies of asphalt emulsion sealants conducted by the Pacific Northwest Laboratory have demonstrated that the sealants are effective in containing radon and other potentially hazardous material within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to near background levels. Field tests at the tailings pile in Grand Junction, Colorado, confirmed that an 8-cm admix seal containing 22 wt% asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and compacted, overburden was applied over the seal to protect the seal from ultraviolet degradation.

  18. Deformation Parameters and Fatigue of the Recycled Asphalt Mixtures

    Science.gov (United States)

    Šrámek, Juraj

    2015-12-01

    The deformational properties of asphalt mixtures measured by dynamic methods and fatigue allow a design the road to suit the expected traffic load. Quality of mixtures is also expressed by the resistance to permanent deformation. Complex modulus of stiffness and fatigue can reliably characterize the proposed mixture of asphalt pavement. The complex modulus (E*) measurement of asphalt mixtures are carried out in laboratory of Department of Construction Management at University of Žilina by two-point bending test method on trapezoid-shaped samples. Today, the fatigue is verified on trapezoid-shaped samples and is assessed by proportional strain at 1 million cycles (ɛ6). The test equipment and software is used to evaluate fatigue and deformation characteristics.

  19. Modelling and Laboratory Studies on the Adhesion Fatigue Performance for Thin-Film Asphalt and Aggregate System

    OpenAIRE

    Dongsheng Wang; Junyan Yi; Decheng Feng

    2014-01-01

    Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the adhesion fatigue performance were also investigated. Experiment results show that asphalt has more ...

  20. Final environmental and regulatory assessment of using asphalt as a sealant in mine shafts

    International Nuclear Information System (INIS)

    This report discusses the properties of asphalt, the current regulatory status governing asphalt and future regulatory implications which may be pertinent in using asphalt as a waterproof shaft sealant. An understanding of the inherent organic composition of asphalt, an increase in the number of health and environmental research publications conducted on asphalt and an examination of the apparent trend of regulatory agencies toward more stringent environmental regulation governing the use of organic materials suggests asphalt could become regulated at a future time. This would only occur, however, if asphalt was found to conform to the present regulatory definitions of pollutants, contaminants or hazardous substances or if asphalt was included on a regulated substance list. In this regard, the study points out that asphalt contains very low levels of hazardous poly-nuclear aromatics (PNA's). These levels are significantly lower than the levels present in coal tars, a substance known to contain high levels of hazardous PNA's. Asphalt, however, has the inherent potential of producing higher concentrations of PNA's if the adverse condition of cracking should occur during the refinery production stage or on-site preparation of the asphalt. Also, unless existing control technology is applied, emission levels of sulfur dioxide, carbon monoxide, particulates and volatile organic carbons from the on-site preparation facilities could approach the permissible health standard levels of EPA. The study indicates, however, that available literature is limited on these issues

  1. An investigation of waste foundry sand in asphalt concrete mixtures.

    Science.gov (United States)

    Bakis, Recep; Koyuncu, Hakan; Demirbas, Ayhan

    2006-06-01

    A laboratory study regarding the reuse of waste foundry sand in asphalt concrete production by replacing a certain portion of aggregate with WFS was undertaken. The results showed that replacement of 10% aggregates with waste foundry sand was found to be the most suitable for asphalt concrete mixtures. Furthermore, the chemical and physical properties of waste foundry sand were analysed in the laboratory to determine the potential effect on the environment. The results indicated that the investigated waste foundry sand did not significantly affect the environment around the deposition PMID:16784170

  2. Asphaltic concrete overlays of rigid and flexible pavements

    Science.gov (United States)

    Kinchen, R. W.; Temple, W. H.

    1980-10-01

    The development of a mechanistic approach to overlay thickness selection is described. The procedure utilizes a deflection analysis to determine pavement rehabilitation needs. Design guides for selecting the overlay thickness are presented. Tolerable deflection-traffic load relationships and the deflection attenuation properties of asphaltic concrete were developed, representing the subgrade support conditions and properties of materials used in Louisiana. All deflection measurements on asphaltic concrete were corrected for the effect of temperature. Deflection measurements taken before and after overlay were also adjusted to minimize the effects of seasonal subgrade moisture variation.

  3. Reduction in radiation exposure and volume using asphalt solidification

    International Nuclear Information System (INIS)

    The solidification of liquid and solid radioactive wastes from nuclear power plants with an extruder-evaporator using an asphalt binder minimizes both volume and radiation exposure. The automatic evaporation of water in liquid radwastes prior to incorporation into asphalt reduces the volume to be transported and disposed. In turn, the numbers of drums requiring handling is reduced 5 to 10 times thereby lessening the chances for radiation exposure. Also, the extruder-evaporator is self-shielded and contains only about one gallon of the radwaste. Dose rates at the surface of the equipment and filled containers from commercially operating systems for the past 10 years in Europe are given

  4. SYSTEM FOR CONTROLLING ELECTRIC DRIVE OF ASPHALT CONCRETE MIXING PLANT

    Directory of Open Access Journals (Sweden)

    A. S. Surmak

    2005-01-01

    Full Text Available It is proposed to evaluate quality of asphalt concrete mixture through definition of current component variable of a drive motor and measurement of its derivative sign. In order to carry out final determination of mixture uniformity a transducer on the basis of a nuclear magnetic resonance is applied. Block diagram of the system is presented and algorithm of its operation is given in the paper. In addition to improvement of the finished product quality the application of the system makes it possible to reduce bitumen consumption used for production of asphalt concrete.

  5. Numerical simulation on the thermal response of heat-conducting asphalt pavements

    International Nuclear Information System (INIS)

    Using asphalt pavements as a solar collector is a subject of current interest all over the world because the sun provides a cheap and abundant source of clean and renewable energy, which can be captured by black asphalt pavements. A heat-conducting device is designed to absorb energy from the sun. In order to validate what parameters are critical in the asphalt collector, a finite element model is developed to predict the thermal response of the heat-conducting device compared to the conventional asphalt mixture. Some factors that may affect the asphalt pavement collector are considered, including the coefficient of heat conductivity of the asphalt pavement, the distance between pipes with the medium, water, and the pipe's diameter. Ultimately, the finite element model can provide pavement engineers with an efficient computational tool that can be a guide to the conductive asphalt solar collector's experiment in the laboratory.

  6. Numerical simulation on the thermal response of heat-conducting asphalt pavements

    Science.gov (United States)

    Wang, Hong; Wu, Shaopeng; Chen, Mingyu; Zhang, Yuan

    2010-05-01

    Using asphalt pavements as a solar collector is a subject of current interest all over the world because the sun provides a cheap and abundant source of clean and renewable energy, which can be captured by black asphalt pavements. A heat-conducting device is designed to absorb energy from the sun. In order to validate what parameters are critical in the asphalt collector, a finite element model is developed to predict the thermal response of the heat-conducting device compared to the conventional asphalt mixture. Some factors that may affect the asphalt pavement collector are considered, including the coefficient of heat conductivity of the asphalt pavement, the distance between pipes with the medium, water, and the pipe's diameter. Ultimately, the finite element model can provide pavement engineers with an efficient computational tool that can be a guide to the conductive asphalt solar collector's experiment in the laboratory.

  7. Criteria for asphalt-rubber concrete in civil airport pavements: Mixture design

    Science.gov (United States)

    Roberts, F. L.; Lytton, R. L.; Hoyt, D.

    1986-07-01

    A mixture design procedure is developed to allow the use of asphalt-rubber binders in concrete for flexible airport pavement. The asphalt-rubber is produced by reacting asphalt with ground, scrap tire rubber to produce the binder for the asphalt-rubber concrete. Procedures for laboratory preparation of alsphalt-rubber binders using an equipment setup that was found by researchers to produce laboratory binders with similar properties to field processes are included. The rubber-asphalt concrete mixture design procedure includes adjustments to the aggregate gradation to permit space for the rubber particles in the asphalt-rubber binder as well as suggested mixing and compaction temperatures, and compaction efforts. While the procedure was used in the laboratory to successfully produce asphalt-rubber concrete mixtures, it should be evaluated in the field to ensure that consistent results can be achieved in a production environment.

  8. Influence of limestone fillers on combustion characteristics of asphalt mortar for pavements

    DEFF Research Database (Denmark)

    Ke, Wu; Kai, Zhu; Wu, Hao;

    2014-01-01

    Asphalt materials will be ignited and release significant toxic fumes within tunnel fires. Thus, combustion characteristics of asphalt materials used in road tunnel should be studied in order to limit such an adverse effect. In the present work we study the influence of limestone fillers on combu......Asphalt materials will be ignited and release significant toxic fumes within tunnel fires. Thus, combustion characteristics of asphalt materials used in road tunnel should be studied in order to limit such an adverse effect. In the present work we study the influence of limestone fillers...... on combustion characteristics of asphalt mortar by thermogravimetric and kinetic analysis. It is shown that the combustion of asphalt mortar is not just a linear superposition of asphalt and limestone. The limestone will increase the ignition point and the activation energy of the primary volatile release...... the assumption of random nucleation and nuclei growth, whereas the limestone decomposition stage appears to follow the one-dimensional phase boundary model....

  9. Influence Of The Powder/Asphalt Ratio On The High Stress Responses Of Crumb Rubber Modified Asphalt Mortars

    Directory of Open Access Journals (Sweden)

    Ma Tengfei

    2016-04-01

    Full Text Available In order to study different powder/asphalt ratios effect on nonlinear viscoelastic responses of mortar, this paper choose limestone as the filler, and powder/asphalt ratio is 0.2,0.4,0.6,and 0.8.The tests were conducted using a Dynamic Shear Rheometer to perform multiple stress creep recovery (MSCR tests.The test results show that,with the increase of powder/asphalt ratio irrecoverable creep compliance(Jnr value of the mortar , decrease gradually, and the amplitude is larger.High temperature performance of the mortar are improve obviously.Using environmental scanning electron microscopy to scan those mortars,it analyzed the improvement of mortar from the microcosmic mechanism.

  10. Background of superpave asphalt mixture design and analysis. National asphalt training center demonstration project 101. Final report, December 1992-November 1994

    Energy Technology Data Exchange (ETDEWEB)

    McGennis, R.B.; Anderson, R.M.; Kennedy, T.W.; Solaimanian, M.

    1995-02-01

    The manual represents the first formal training document that embodies the complete series of SUPERPAVE asphalt mixture design and analysis test equipment and procedures. These tests and procedures represent the results of the SHRP 5-year research effort to investigate and improve asphalt cement technology. This manual was developed under the FHWA`s National Asphalt Training Center. Students attending the center utilize this manual to obtain a better understanding of the underlying theory behind asphalt mixture design and analysis, as well as how to perform each of the new procedures.

  11. Analysis of Adhesive Characteristics of Asphalt Based on Atomic Force Microscopy and Molecular Dynamics Simulation.

    Science.gov (United States)

    Xu, Meng; Yi, Junyan; Feng, Decheng; Huang, Yudong; Wang, Dongsheng

    2016-05-18

    Asphalt binder is a very important building material in infrastructure construction; it is commonly mixed with mineral aggregate and used to produce asphalt concrete. Owing to the large differences in physical and chemical properties between asphalt and aggregate, adhesive bonds play an important role in determining the performance of asphalt concrete. Although many types of adhesive bonding mechanisms have been proposed to explain the interaction forces between asphalt binder and mineral aggregate, few have been confirmed and characterized. In comparison with chemical interactions, physical adsorption has been considered to play a more important role in adhesive bonding between asphalt and mineral aggregate. In this study, the silicon tip of an atomic force microscope was used to represent silicate minerals in aggregate, and a nanoscale analysis of the characteristics of adhesive bonding between asphalt binder and the silicon tip was conducted via an atomic force microscopy (AFM) test and molecular dynamics (MD) simulations. The results of the measurements and simulations could help in better understanding of the bonding and debonding procedures in asphalt-aggregate mixtures during hot mixing and under traffic loading. MD simulations on a single molecule of a component of asphalt and monocrystalline silicon demonstrate that molecules with a higher atomic density and planar structure, such as three types of asphaltene molecules, can provide greater adhesive strength. However, regarding the real components of asphalt binder, both the MD simulations and AFM test indicate that the colloidal structural behavior of asphalt also has a large influence on the adhesion behavior between asphalt and silicon. A schematic model of the interaction between asphalt and silicon is presented, which can explain the effect of aging on the adhesion behavior of asphalt. PMID:27115043

  12. Effects of asphalt rejuvenator on thermal and mechanical properties on oxidized hot mixed asphalt pavements

    Science.gov (United States)

    Farace, Nicholas A.; Buttlar, William G.; Reis, Henrique

    2016-04-01

    The utilization of asphalt rejuvenator, and its effectiveness for restoring thermal and mechanical properties was investigated via Disk-shaped Compact Tension (DC(T)) and acoustic emission (AE) testing for determining mechanical properties and embrittlement temperatures of the mixtures. During the DC(T) testing the fracture energies and peak loads were used to measure the resistance of the rejuvenated asphalt to low temperature cracking. The AE testing monitored the acoustic emission activity while the specimens were cooled from room temperature to -40 °C to estimate the temperature at which thermal cracking began (i.e. the embrittlement temperature). First, a baseline response was obtained by obtaining the mechanical and thermal response of virgin HMA samples and HMA samples that had been exposed to oxidative aging for 36 hours at 135°C. The results showed the virgin samples had much higher peak loads and fracture energies than the 36 hours aged samples. Acoustic Emission showed similar results with the virgin samples having embrittlement temperatures 10 °C cooler than the 36 hours aged specimens. Then, overaged for 36 hours specimens were treated different amounts of rejuvenator (10%, 15%, and 20% by weight of binder content) and left to dwell for increased amount of time periods varying from one to eight weeks. It was observed that the AE results showed an improvement of embrittlement temperature with increasing with the dwell times. The 8 weeks specimens had cooler embrittlement temperatures than the virgin specimens. Finally, the low temperature effects on fracture energy and peak load of the rejuvenated asphalt was investigated. Rejuvenator was applied (10% by weight of binder) to specimens aged 36 hours at 135 °C, and the dwell time was varied from 1 to 4 weeks. The results showed that the peak loads were restored to levels of the virgin specimens, and the fracture energies improved to levels beyond that of the virgin specimens. The results also showed a

  13. Progresses in irradiating SBS for road asphalt applications

    International Nuclear Information System (INIS)

    Technical developments at SINAP to improve properties of SBS, a styrene-butadiene- styrene copolymer, for road asphalt applications are reviewed. In an attempt to better solve problems related to undesirable compatibility of SBS to asphalt components, we proposed a new method to modify the SBS molecular chains with ionizing radiations through radiation graft copolymerization and radiation crosslinking. Grafting a monomer with polar functional groups onto SBS molecules improves compatibility of SBS to polar components of asphalt, hence enhanced storage stability of the polymer modified asphalt (PMA), while crosslinks of SBS molecular chains endues increased physical properties to the PMA. Mechanisms of the radiation effects were studied with a series of SBS samples irradiated by 60Co γ-rays or electron beams. The PMA and macadam-blended PMA samples showed higher performance than the control, i.e. SBS-modified asphalt by conventional approaches. The results can be summarized as follows. 1. The grafted SBS enhances thermostability of saturates and aromatics, the two asphalt components that exhibit the biggest SBS-swelling effect. The resins of asphalt, however, can hardly be absorbed by SBS, and the SBS is in a phase-separation status with the resins. Therefore, it is crucial to strengthen reactions between SBS and the resins to obtain stable and high quality PMA. 2. SBS molecular chains can be crosslinked with irradiation of a few tens of kGy. The crosslinking effect was evidenced by increased molecular weight of SBS and wider distribution of the molecular weight in GPC measurement of the irradiated SBS samples, and by decreased activation energy of viscosity in rheological measurement, in which the storage modulus G' increased and the loss modulus G' declined with increasing doses, indicating a larger elastic component and smaller viscous component in the irradiated SBS. Correspondingly, temperature sensitivity of the irradiated SBS reduced. Blended with SBS

  14. Modeling of asphalt and experiments with a discrete particles method

    NARCIS (Netherlands)

    Ormel, T.J.; Magnanimo, V.; Huerne, ter H.L.; Luding, S.; Wilson, D.; Costello, S.; Henning, T.; Black, P.; Olsen, C.

    2012-01-01

    Asphalt is an important road paving material. Besides an acceptable price, durability, surface conditions (like roughening and evenness), age-, weather- and traffic-induced failures and degradation are relevant aspects. In the professional road-engineering branch empirical models are used to describ

  15. Performance related characterisation of the mechanical behaviour of asphalt mixtures

    NARCIS (Netherlands)

    Molenaar, J.M.M.

    2004-01-01

    The investigation was undertaken to support innovations in the field of asphalt pavement design and material selection, and to be able to evaluate or judge the risk of failure and cost-effectiveness of newly developed paving materials in order to justify their application. To be able to determine th

  16. Compressive Strength Development and Microstrueture of Cement.asphalt Mortar

    Institute of Scientific and Technical Information of China (English)

    WANG Qiang; YAN Peiyu; KONG Xiangming; YANG Jinbo

    2011-01-01

    The compressive strength developing process and the microstructure of cement-asphalt mortar (CA mortar) were investigated.The fluidity of CA mortar has a great influence on its strength.The optimum value of spread diameter of slump flow test is in the range of 300 to 400 mm.The compressive strength of CA mortar keeps a relatively high growth rate in 56 days and grows slowly afterwards.The residual water of hydration in CA mortar freezes under minus environmental temperature which can lead to a significant reduction of the strength of CA mortar.Increasing A/C retards asphalt emulsion splitting and thus prolongs the setting process of CA mortar.The hydration products of cement form the major structural framework of hardened CA mortar and asphalt is a weak phase in the framework but improves the viscoelastic behavior of CA mortar.Therefore,asphalt emulsion should be used as much as possible on the condition that essential performance criterions of CA mortar are satisfied.

  17. Sinopec Wins Bid for Special Asphalt for Racing Track

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ On February 13 Sinopec and Shanghai International Circuit held a signing ceremony in Beijing for the contract to supply special asphalt for racing track use. Mr. Wang Jiming,Vice Board Chairman and President of Sinopec and Mr. Wang Tianpu, Senior Vice President of Sinopec, attended the ceremony.

  18. Assessment of Water Quality of Runoff from Sealed Asphalt Surfaces

    Science.gov (United States)

    This report discusses the results of runoff tests from recently-sealed asphalt surfaces conducted at EPA's Urban Watershed Research Facility (UWRF) in Edison, New Jersey. Both bench-scale panels and full-scale test plots were evaluated. Full-scale tests were performed on an asp...

  19. Asphalt and Wood Shingling. Roofing Workbook and Tests.

    Science.gov (United States)

    Brown, Arthur

    This combination workbook and set of tests contains materials on asphalt and wood shingling that have been designed to be used by those studying to enter the roofing and waterproofing trade. It consists of seven instructional units and seven accompanying objective tests. Covered in the individual units are the following topics: shingling…

  20. Microstructure - based continuum damage model for Asphalt mixes

    International Nuclear Information System (INIS)

    Full text.Hot mix asphalt (HMA) is a complex composite material that consists of different sizes of aggregates, asphalt binder and air voids. One of the most important failures in asphalt pavements is caused by permanent deformation under high service temperature. An HMA with high resistance to permanent deformation work-hardens under repeated loading with accumulating strain. However, HMA that is susceptible to permanenr deformation develop microcracks under repeated loading, which softens the mix and leads ao an increase in the rate of accumulated strain. Most of macroscopic response of HMA, assume isotropic material properties and do not account for the microscopic behavior. This study develops a viscoplastic constitutive model for asphalt mixtures that incorporates microstructure parameters. The model is based on Perzyna's elasto-viscoplastic theory. The viscous flow function is extended to reflect the microstructure anisotropy. In addition, a damage parameter is included in the model to reflect the initiation adn propagation of cracks. The model's parameters are obtained using image analysis procedures, static creep tests and strength tests. The model is used to describe the behavior of number of mixtures with known field performance

  1. Characterization of Brazilian asphalt using X-ray diffraction

    International Nuclear Information System (INIS)

    Asphalt is a sticky, black and highly viscous liquid or semi-solid that is presented in most crude petroleum and in some natural deposits. The X ray diffraction can give valuable information over the characteristics of a material. Thus, the X-ray diffraction (XRD) method was employed to investigate parameters that characterize and differentiate asphalt groups (Boscan, CAP20, CAP40, CAP50/60, CAP50/70 and CAP85/100). The scattering measurements were carried out in θ-2θ reflection geometry using a powder diffractometer Shimadzu XRD-6000 at the Nuclear Instrumentation Laboratory, Brazil. Scans were typically done from 8 deg to 28 deg every 0.05. The parameters analyzed were: FWHM, peak area, peak center, peak height, left half width and right half width. Thus, in this study, scattering profiles from different asphalt groups were carefully measured in order to establish characteristic signatures of these materials. The results indicate that by using three parameters (peak centroid, peak area and peak intensity) it is possible to characterize and differentiate the asphalt. (author)

  2. Improvement of the asphalt-waste products in leachability

    International Nuclear Information System (INIS)

    To improve in leachability of the asphalt products containing evaporator residue from BWR, a method of reducing the swelling of asphalt products, which is a major cause for increasing the leachability, has been developed. Leachability of the resultant asphalt products was examined by IAEA's method. The reduction of swelling is achieved successfully by addition of an equivalent quantity of calcium chloride to the sodium sulfate contained in the residue; the sodium sulfate is converted to calcium sulfate and sodium chloride. The specimen (Asphalt/Na2SO4: 0.5) prepared by this improved method shows little swelling when immersed in water. The specimen without addition of calcium chloride gives a cumulative leaching fraction of about 0.65 for 137Cs and 0.20 for 60Co in 30 days. On the contrary, the corresponding values in about 100 days of the specimen with calcium chloride added are 5 x 10-4 and 1 x 10-4 for 137Cs and 60Co, respectively. These results indicate that the method is promising for reducing the leachability. Coating of the specimen surface with a fresh bitumen further reduces the leachability to a negligibly small value. (author)

  3. Mechanistic and Economical Characteristics of Asphalt Rubber Mixtures

    Directory of Open Access Journals (Sweden)

    Mena I. Souliman

    2016-01-01

    Full Text Available Load associated fatigue cracking is one of the major distress types occurring in flexible pavement systems. Flexural bending beam fatigue laboratory test has been used for several decades and is considered to be an integral part of the new superpave advanced characterization procedure. One of the most significant solutions to prolong the fatigue life for an asphaltic mixture is to utilize flexible materials as rubber. A laboratory testing program was performed on a conventional and Asphalt Rubber- (AR- gap-graded mixtures to investigate the impact of added rubber on the mechanical, mechanistic, and economical attributes of asphaltic mixtures. Strain controlled fatigue tests were conducted according to American Association of State Highway and Transportation Officials (AASHTO procedures. The results from the beam fatigue tests indicated that the AR-gap-graded mixtures would have much longer fatigue life compared with the reference (conventional mixtures. In addition, a mechanistic analysis using 3D-Move software coupled with a cost analysis study based on the fatigue performance on the two mixtures was performed. Overall, analysis showed that AR modified asphalt mixtures exhibited significantly lower cost of pavement per 1000 cycles of fatigue life per mile compared to conventional HMA mixture.

  4. The adoption of innovative asphalt equipment in road construction

    NARCIS (Netherlands)

    Habets, Thijs; Voordijk, Hans; Sijde, van der Peter

    2011-01-01

    Purpose – The purpose of this paper is to provide insight into the adoption process of innovative asphalt equipment in road construction and how the level of knowledge as characterised by the level of education in the companies affects this process. The emphasis is on equipment used for transporting

  5. The asphalt paving process: plans for action research

    NARCIS (Netherlands)

    Miller, Seirgei; Huerne, ter Henny; Dorée, André; Atkin, Brian; Borgbrant, Jan

    2007-01-01

    Recent significant changes in public sector procurement in the Netherlands are forcing road construction companies to professionalize one of their primary processes: on-site asphalt paving. This paper describes an initiative aimed at improving quality in the process. A literature review confirmed th

  6. Design tool for the thermal energy potential of asphalt pavements

    NARCIS (Netherlands)

    Loomans, M.G.L.C.; Oversloot, H.P.; Bondt, A. de; Jansen, R.; Rij, H. van

    2003-01-01

    This paper describes the development of a design tool for the calculation of the thermal energy potential of a so-called asphalt collector. Two types of numerical models have been developed and validated against experimental results from a full-scale test-site. The validation showed to be a tedious

  7. Performance of Recycled Asphalt Pavement as Coarse Aggregate in Concrete

    Directory of Open Access Journals (Sweden)

    Fidelis O. OKAFOR

    2010-12-01

    Full Text Available Recycled asphalt pavement (RAP is the reclaimed and reprocessed pavement material containing asphalt and aggregate. Most RAP is recycled back into pavements, and as a result there is a general lack of data pertaining to the mechanical properties for RAP in other possible applications such as Portland cement concrete. In the present study, some mechanical properties of Portland cement concrete containing RAP as coarse aggregate were investigated in the laboratory. Six concrete mixes of widely differing water/cement ratios and mix proportions were made using RAP as coarse aggregate. The properties tested include the physical properties of the RAP aggregate, the compressive and flexural strengths of the concrete. These properties were compared with those of similar concretes made with natural gravel aggregate. Results of the tests suggest that the strength of concrete made from RAP is dependent on the bond strength of the “asphalt-mortar” (asphalt binder-sand-filler matrix coatings on the aggregates and may not produce concrete with compressive strength above 25 MPa. However, for middle and low strength concrete, the material was found to compare favorably with natural gravel aggregate.

  8. Using waste plastic bottles as additive for stone mastic asphalt

    International Nuclear Information System (INIS)

    Highlights: → The PET increased the stiffness level of the mixture improving its resistance level against permanent deformation. → The effects of waste PET on Marshall Stability, air void and bulk specific gravity of the mixture are significant. → The appropriate amount of PET was found to be 6% by weight of bitumen. -- Abstract: Currently, polymer modified asphalt mixture is a relatively costly mixture for paving roads. One way to reduce the cost of such constructions and rendering them more convenient is by using inexpensive polymers, i.e. waste polymers. The main purpose of this research is to determine the effect of incorporating waste plastic bottles (Polyethylene Terephthalate (PET)) on the engineering properties of stone mastic asphalt (SMA) mixture. The volumetric and mechanical properties of asphalt mixes that include various percentages of PET (0%, 2%, 4%, 6%, 8% and 10%) were calculated and assessed with laboratory tests. The appropriate amount of PET was found to be 6% by weight of bitumen. The outcomes were statistically analysed and the determination of the significance at certain confidence limits was performed with the two factor variance analysis (ANOVA). Moreover, some studies conducted on polyethylene modified asphalt mixture have also been taken into consideration in this paper. The results show that the addition of PET has a significant positive effect on the properties of SMA and it can promote the re-use of waste material in industry in an environmentally friendly and economical way.

  9. Some Properties of Emulsified Asphalt Paving Mixture at Iraqi Environmental Conditions

    Directory of Open Access Journals (Sweden)

    Shakir.A.Al-Mishhadani* Hasan.H.Al-Baid

    2014-04-01

    Full Text Available Cold emulsified asphalt mixture is generally a mix made of emulsified asphalt withaggregate. Emulsified asphalt is manufactured from base asphalt, emulsifier agent and waterwith approximate percentage of 40% to 75% asphalt, 0.1% to 2.5% emulsifier and 25% to60% water plus some minor components. This study aims to use the cold emulsified asphaltmixtures for road construction and maintenance in Iraq as an alternative to the hot asphaltmixtures, due to its economical, practical and environmental advantages. This studyfocusedto test and evaluates the emulsified asphalt material properties to be used as paving mixture.The tested properties of emulsified asphalt mixture were bulk density, air voids, dry Marshallstability, wet Marshall stability, retained Marshall stability, flow tests and compared with thecommon used specification.The results indicate that the emulsified asphalt type cationic slowsetting low viscosity (CSS-1 is very suitable with quartz type of aggregate from Al-Nibaayquarry. From many trial mixes it is found that the best percentages of initial residual bitumencontent to produced adequateresults for coating test ,mixing ,compaction ,curing and Marshallstability were ranged from (2.5%, 3%,3.5%,4% and 4.5%, andthe optimum percentage is(3.5%.Finally it can be conducted that the emulsified asphalt mixture is a suitable alternativemixture to the hot asphalt mixture for road construction and maintenance in Iraq.  

  10. Some Properties of Emulsified Asphalt Paving Mixture at Iraqi Environmental Conditions

    Directory of Open Access Journals (Sweden)

    Shakir.A.Al-Mishhadani

    2014-02-01

    Full Text Available Cold emulsified asphalt mixture is generally a mix made of emulsified asphalt withaggregate. Emulsified asphalt is manufactured from base asphalt, emulsifier agent and waterwith approximate percentage of 40% to 75% asphalt, 0.1% to 2.5% emulsifier and 25% to60% water plus some minor components. This study aims to use the cold emulsified asphaltmixtures for road construction and maintenance in Iraq as an alternative to the hot asphaltmixtures, due to its economical, practical and environmental advantages. This studyfocusedto test and evaluates the emulsified asphalt material properties to be used as paving mixture.The tested properties of emulsified asphalt mixture were bulk density, air voids, dry Marshallstability, wet Marshall stability, retained Marshall stability, flow tests and compared with thecommon used specification.The results indicate that the emulsified asphalt type cationic slowsetting low viscosity (CSS-1 is very suitable with quartz type of aggregate from Al-Nibaayquarry. From many trial mixes it is found that the best percentages of initial residual bitumencontent to produced adequateresults for coating test ,mixing ,compaction ,curing and Marshallstability were ranged from (2.5%, 3%,3.5%,4% and 4.5%, andthe optimum percentage is(3.5%.Finally it can be conducted that the emulsified asphalt mixture is a suitable alternativemixture to the hot asphalt mixture for road construction and maintenance in Iraq.

  11. Evaluation system for CO2 emission of hot asphalt mixture

    Directory of Open Access Journals (Sweden)

    Bo Peng

    2015-04-01

    Full Text Available The highway construction industry plays an important role in economic and development, but is also a primary source of carbon emission. Accordingly, with the global climate change, energy conservation and reduction of carbon emissions have become critical issues in the highway construction industry. However, to date, a model for the highway construction industry has not been established. Hence, to implement a low-carbon construction model for highways, this study divided asphalt pavement construction into aggregate stacking, aggregate supply, and other stages, and compiled a list of energy consumption investigation. An appropriate calculation model of CO2 emission was then built. Based on the carbon emission calculation model, the proportion of carbon emissions in each stage was analyzed. The analytic hierarchy process was used to establish the system of asphalt pavement construction with a judgment matrix, thereby enabling calculation of the weight coefficient of each link. In addition, the stages of aggregate heating, asphalt heating, and asphalt mixture mixing were defined as key stages of asphalt pavement construction. Carbon emissions at these stages accounted for approximately 90% of the total carbon emissions. Carbon emissions at each stage and their impact on the environment were quantified and compared. The energy saving construction schemes as well as the environmental and socioeconomic benefits were then proposed. Through these schemes, significant reductions in carbon emissions and costs can be achieved. The results indicate that carbon emissions reduce by 32.30% and 35.93%, whereas costs reduce by 18.58% and 6.03%. The proposed energy-saving and emission reduction scheme can provide a theoretical basis and technical support for the development of low-carbon highway construction.

  12. Decision of National and Provincial Highway Asphalt Pavement Structure Based on Value Engineering

    Directory of Open Access Journals (Sweden)

    Yingwei Ren

    2014-01-01

    Full Text Available It is important that decision of asphalt pavement structure requires overall considerations of the performance and financial investment. To have asphalt pavement structure fulfilling good reliability, the asphalt pavement structure decision was researched based on value engineering theory. According to the national and provincial highway investigation data in Shandong Province during the last decade, the asphalt pavement performance attenuation rules of traffic levels and asphalt layer thicknesses were developed, and then the road performance evaluation method was presented. In addition, the initial investments, the costs of road maintenance, and middle-scale repair in a period were analyzed. For the light traffic and medium traffic example, using the value engineering method, the pavement performance and costs of which thickness varies from 6 cm to 10 cm were calculated and compared. It was concluded that value engineering was an effective method in deciding the asphalt pavement structure.

  13. Accelerated aging of catalytically airblown asphalt membranes under simulated uranium mill tailings impoundment conditions

    International Nuclear Information System (INIS)

    This paper evaluates the performance of asphalt membranes by examining the chemical and permeability changes experienced by the asphalt during aging tests. The aging process was accelerated by exposing the asphalt to elevated temperatures, high oxygen concentrations, and increased strengths of aqueous oxidizing agents. The synergistic effects of the variables are evaluated by using a fractional factorial experimental design. The installation costs for a catalytically airblown asphalt liner are roughly half that of the typical polymeric materials, and also less than the rubberized asphalt membrane. The results of the initial accelerated aging tests of the asphalt membranes indicate that this material will provide stable, long-term leachate isolation in a mill tailings environment

  14. SGC Tests for Influence of Material Composition on Compaction Characteristic of Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Qun Chen

    2013-01-01

    Full Text Available Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture was studied using Superpave gyratory compactor (SGC simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show that, for the mixture with a bigger content of asphalt, its density increases faster, that there is an optimal amount of fine aggregates for optimal compaction and that an appropriate amount of mineral powder will improve workability of mixtures, but overmuch mineral powder will make mixtures dry and hard. Conclusions based on SGC tests can provide basis for how to adjust material composition for improving compaction performance of asphalt mixtures, and for the designed asphalt mixture, its compaction performance can be predicted through these conclusions, which also contributes to the choice of compaction schemes.

  15. SGC tests for influence of material composition on compaction characteristic of asphalt mixtures.

    Science.gov (United States)

    Chen, Qun; Li, Yuzhi

    2013-01-01

    Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture) was studied using Superpave gyratory compactor (SGC) simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show that, for the mixture with a bigger content of asphalt, its density increases faster, that there is an optimal amount of fine aggregates for optimal compaction and that an appropriate amount of mineral powder will improve workability of mixtures, but overmuch mineral powder will make mixtures dry and hard. Conclusions based on SGC tests can provide basis for how to adjust material composition for improving compaction performance of asphalt mixtures, and for the designed asphalt mixture, its compaction performance can be predicted through these conclusions, which also contributes to the choice of compaction schemes. PMID:23818830

  16. Development of an innovative bio-binder using Asphalt-rubber technology

    OpenAIRE

    Peralta, J.; Silva, Hugo Manuel Ribeiro Dias da; Williams, R. Christopher; Rover, Marjorie; Machado, A.V.

    2013-01-01

    This research work evaluates several parameters that can affect Asphalt Rubber (AR) binder performance and applies the AR technology to the development of an innovative renewable bio-binder that can fully and cost-effectively replace asphaltic bitumen derived from petroleum in flexible pavement construction. The “Binder Accelerated Separator” method was used to divide the constituents of the Asphalt Rubber and bio-binder (residual binder and swelled rubber). The physical and chemi...

  17. Asphalt rubber interlayer benefits on reflective crack retardation of flexible pavement overlays

    OpenAIRE

    Shakir, Shatnawi; Pais, Jorge; Minhoto, Manuel

    2011-01-01

    This paper provides an overview of the asphalt rubber interlayer benefits on reflective crack retardation in flexible pavement preservation and rehabilitation strategies. These interlayers are known in California as asphalt rubber absorbing membrane interlayers (SAMI-R) or as asphalt rubber aggregate membrane interlayers (ARAM-I) chip seals. These interlayers have been used successfully as part of cape seals and as part of an overlay system. The paper focuses on the performance in terms of fi...

  18. Asphalt rubber interlayer benefits in minimizing reflective cracking of overlays over rigid pavements

    OpenAIRE

    Shatnawi, Shakir; Pais, Jorge; Minhoto, Manuel

    2012-01-01

    This paper provides an overview of the asphalt rubber interlayer benefits on reflective crack retardation in overlays over rigid pavements. These interlayers are known in California as asphalt rubber absorbing membrane interlayers (SAMI-R) or as asphalt rubber aggregate membrane interlayers (ARAM-I) chip seals. The paper focuses on the performance in terms of field project reviews, laboratory performance tests and finite element analysis. SAMI-R has been given a reflective cracking equivalent...

  19. Effect of cryogenic and ambient crushed rubber on the mechanical properties of hot mixes asphalts

    OpenAIRE

    Neto, Silvrano Adonias Dantas; Farias, Márcio Muniz de; Pais, Jorge C.

    2009-01-01

    The crumb rubber used to produce asphalt rubber binders can be obtained either through the ambient grinding or the cryogenic processes. The final product obtained usually presents significant differences which influence the physical properties of asphalt rubber binders and, consequently, the mechanical properties of the asphalt rubber hot mixes produced with these modified binders. The objective of the study presented in this paper is to learn about the influence that the type of crumb rubber...

  20. Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review

    OpenAIRE

    Lo Presti, Davide

    2013-01-01

    Nowadays, only a small percentage of waste tyres are being land-filled. The Recycled Tyre Rubber is being used in new tyres, in tyre-derived fuel, in civil engineering applications and products, in moulded rubber products, in agricultural uses, recreational and sports applications and in rubber modified asphalt applications. The benefits of using rubber modified asphalts are being more widely experienced and recognized, and the incorporation of tyres into asphalt is likely to increase. The te...

  1. Use of tire rubber to improve fatigue performance of asphalt mixtures

    OpenAIRE

    Thives, L. P.; Trichês, Glicério; Pereira, Paulo A. A.; Pais, Jorge C.

    2010-01-01

    The accelerated failure of pavements is one of the main problems in Brazilian roads resulting from fatigue cracking due to the repeated application of traffic induced stresses. The incorporation of crumb rubber from waste tires in asphalt, named asphalt rubber, is a method which has been used in several countries to improve the properties of asphalt pavement mixtures and, at the same time, has been a ecologically alternative to deal with the proper disposal of waste tires. This...

  2. The Research on Improvement of Low Temperature Stability for Diatomite Modified Asphalt Mixture with PE Particles

    OpenAIRE

    HU Qiusheng; Zhou, Gang

    2015-01-01

    In light of the lake of low temperature stability for diatomaceous which used as asphalt modifier.Stat the research with the diatomite produced at Jilin Changbai, using the way of low temperature bending test to evaluate the PE and diatomite composite modified asphalt mixture’s low temperature crack resistance performance. The results showed that after the diatomite and PE composite modified asphalt mixture has the best advantage of anti-cracking performance under low-temperature ...

  3. Removal of contaminated asphalt layers by using heat generating powder metallic systems

    International Nuclear Information System (INIS)

    Heat generating systems on the base of powder metallic fuel were used for the removal of contaminated asphalt layers. Decontamination of spots which had complex geometric form was performed. Asphalt layers with deep contamination were removed essentially all radionuclides being retained in asphalt residue. Only a small part (1 - 2 %) of radionuclides could pass to combustion slag. No radionuclides were detected in aerosol-gas phase during decontamination process

  4. Professionalising the asphalt construction process: aligning information technologies, operators' knowledge and laboratory practices

    OpenAIRE

    Bijleveld, Frank Roland

    2015-01-01

    This research addresses the need to professionalise the asphalt construction process. A distinctive action research strategy is designed and carried out to progressively improve operational strategies of asphalt teams from technological, human (operator) and laboratory perspectives. Using information technologies, such as GPS, a laser-linescanner, and infrared cameras, the on-site construction process in made explicit. More than thirty asphalt construction projects are systematically monitore...

  5. Fatigue laws for Brazilians asphalt rubber mixtures obtained in 4 point bending tests

    OpenAIRE

    Fontes, Liseane P. T. L.; Trichês, Glicério; Pais, Jorge C.; Pereira, Paulo A. A.

    2009-01-01

    The majority of Brazilian roadpavements consistsof thin pavement structures unable to resist the damage caused by heavy loads and an increasing traffic demand. The main structural distress modes found in Brazilians asphalt layers is fatigue cracking. One of the prom-ising techniques to improve the pavement performance is through asphalt rubber mixtures, which make use of crumb rubber from scrap tires to modify and enhance the properties of the asphalt. The inexistence of fatigue laws for asph...

  6. Effects of Crumb Rubber Size and Concentration on Performance of Porous Asphalt Mixtures

    OpenAIRE

    Altan Cetin

    2013-01-01

    The purpose of this study is to investigate the effect of size distribution and concentration of crumb rubber on the performance characteristics of porous asphalt mixture. The recycling of scrap tires in asphalt pavements appears as an important alternative providing a large-scale market. The characteristics of bitumen are very important with regard to service life of porous asphalt pavement. The experimental study consists of two main steps. Firstly, the mixture design was performed to deter...

  7. The reinforcement and healing of asphalt mastic mixtures by rejuvenator encapsulation in alginate compartmented fibres

    Science.gov (United States)

    Tabaković, A.; Post, W.; Cantero, D.; Copuroglu, O.; Garcia, S. J.; Schlangen, E.

    2016-08-01

    This paper explores the potential use of compartmented alginate fibres as a new method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are employed to locally distribute the rejuvenator and to overcome the problems associated with spherical capsules and hollow fibres. The work presents proof of concept of the encapsulation process which involved embedding the fibres into the asphalt mastic mixture and the survival rate of fibres in the asphalt mixture. To prove the effectiveness of the alginate as a rejuvenator encapsulating material and to demonstrate its ability survive asphalt production process, the fibres containing the rejuvenator were prepared and subjected to thermogravimetric analysis and uniaxial tensile test. The test results demonstrated that fibres have suitable thermal and mechanical strength to survive the asphalt mixing and compaction process. The CT scan of an asphalt mortar mix containing fibres demonstrated that fibres are present in the mix in their full length, undamaged, providing confirmation that the fibres survived the asphalt production process. In order to investigate the fibres physiological properties and ability to release the rejuvenator into cracks in the asphalt mastic, the environmental scanning electron microscope and optical microscope analysis were employed. To prove its success as an asphalt healing system, compartmented alginate fibres containing rejuvenator were embedded in asphalt mastic mix. The three point bend tests were performed on the asphalt mastic test samples and the degree to which the samples began to self-heal in response was measured and quantified. The research findings indicate that alginate fibres present a promising new approach for the development of self-healing asphalt pavement systems.

  8. Development of asphaltic mix with waste products use

    Directory of Open Access Journals (Sweden)

    Pugin Konstantin Georgievich

    2014-07-01

    Full Text Available The trend of high growth of the vehicle fleet in Russia along with the positive impact on the socio-economic development of the country has a number of adverse consequences, one of which is the high accident rate on the roads. The paper considers modern way to provide the safe vehicles flow with the use of colored asphalt, which is a kind of hot asphalt and can have a variety of colors, which consists of coloring pigments. The conventional method of coloring the asphalt mix is produced by adding color rubble or pigmenting additives. The task, which was put forward, was the establishment of such road concrete mix, from which, without the use of primary materials and without increasing the consumption of bitumen, asphalt concrete road surfaces of acceptable strength could be obtained. As a pigment the dust of gas purification system of electrical furnace DSP - 60 of «Kamastal» plant, Perm, was used. The composition of the dust waste from the furnace consists of metal oxides and silicates. Dust-gas-cleaning is a fine powder with a high specific surface (1.2…2.5 thousand cm /g and bulk density of 3.7…4.2 g/cm . The powder color is dark brown. The density of the ready colored asphalt samples is 2.47...2.49 g/cm , and water saturation is 3.50…3.55 %. As a result of the research the diagrams of the dependence of road concrete mix’s water saturation from dust percentage and a diagram of dependence of concrete mixes’ durability from dust percentage at t = 20° and 50° C were built. After analyzing the obtained curves it can be concluded that the increase of the percentage of dust leads to increase of water saturation of road concrete mix and reduced strength. Thus, the developed asphalt concrete mix allows visually separating the lanes on the road, it has the relevant regulatory requirements durability and water resistance. This mixture corresponds to the type B mark III and can be used in regions I, II, and partly III of road-climatic zones

  9. Mechanism of Fume Suppression and Performance on Asphalt of Expanded Graphite for Pavement under High Temperature Condition

    Institute of Scientific and Technical Information of China (English)

    HUANG Gang; HE Zhaoyi; HUANG Yangcheng; ZHOU Chao; YUAN Xiaoya

    2014-01-01

    Fume suppression mechanisms and the effect of expanded graphite on the performance of asphalt were studied by applying infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and comprehensive thermal analysis (TG, DSC). The experimental results confirm that asphalt which is mixed with expandable graphite will expand in the process of hot mix, and the expanded graphite layer will swell by the light component in the asphalt. The light component in the asphalt and PAHs adsorption on expanded graphite surface or part of the plug in the expanded graphite layer between plates made nucleation crystallization growth. And the Van der Waals force and the bonding of the lattice can effectively restrain the asphalt fume release. Meanwhile, the expanding agent with oxidative can spread into the asphalt, leading to asphalt oxygenated and plastic abate, while the ductility decreases. Expanded graphite, SBS modifier and environment- friendly plasticizers are used to composite modified asphalt. According to asphalt fume release experiment, normal test of asphalt performance, Brookfield viscosity test, RTFOT test and asphalt mixture tests (high temperature stability, low temperature stability, water stability), it has been proven that the modified asphalt’s performance is better than that of matrix asphalt and equivalent to that of SBS modified asphalt. Furthermore, it has good fume suppression effect.

  10. USE OF CRUMB RUBBER FROM USED CAR TIRES IN MINERAL ASPHALT MIXES

    Directory of Open Access Journals (Sweden)

    Andrzej Plewa

    2014-11-01

    Full Text Available With the development of the automotive industry the disposal of used tires is constantly growing problem. Storage of waste rubber is associated with a very long period of decomposition of rubber in the natural conditions. Simultaneously new technologies are developed every year, which in the future may significantly promote recycling of this type of materials. The crumb rubbery modification of the road bitumen is the one of the environmentally safe solutions of rubbery decomposition. Improvement of resistance of the crumb rubbery modification of the road asphalt mixtures is the very important ecological aspect of the future. The article presents the results of research on the fatigue life resistance of asphalt concretes AC16P and AC22P with asphalt-rubber binders. The above analyses have been based on the results of tests of fatigue life of mineral-rubber-asphalt mixes determined by the method of prismatic four-point bending (4PB-PR. Mineral-rubber -asphalt mixes have been diversified according to the amount of the additive of rubber fines in asphalt-rubber binder. On the basis of the test results have been proven improvements functional properties mineral-rubber-asphalt mixes compared with mineral-asphalt mixes with unmodified asphalt.

  11. Application of minerals residues in the asphalt composition; Aplicacao de residuos minerais na composicao do asfalto

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Roberto Carlos da C.; Seidl, Peter Rudolf [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Correia, Julio Cesar Guedes [Centro de Tecnologia Mineral - CETEM, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The performance of asphalt pavements depends mainly on the properties of their constituents: mineral aggregates and asphalt cement. The mineral aggregate represents about 95% in weight of asphalt mixtures having a significant influence on the properties and performance of these mixtures. Asphalt cement (CAP) corresponds to the smaller fraction but it is mainly responsible for adsorption on the mineral aggregates. The objective of this study was to evaluate the interaction between different CAPs with residues from granite saw wills in place of mineral aggregates that run up costs with extraction and processing in asphalt production. This way asphalt production costs as well as the environmental problems that are caused by mineral residue are reduced. Five different asphalt cements, referred to as A, B, C, D and E, and a granite residue were used in this work. The results indicated that the residue strongly absorbs all the CAPs that were studied; particularly CAP A, which is considered the most adequate for the production of asphalt from this residue. Preliminary tests this indicate that asphalt production can use mineral residues instead of mineral aggregates in its composition. (author)

  12. Behavior of asphalt-rubber hot mixes obtained with high crumb rubber contents

    OpenAIRE

    Dantas Neto, Silvrano A.; Farias, Márcio Muniz de; Pais, Jorge C.; Pereira, Paulo A. A.; Santos, Luís Picado

    2003-01-01

    This paper shows the results of a study about the mechanical behavior of dense graded asphalt-rubber hot mixes (grading envelope C of DNER-ES 313/97) prepared with two different types of asphalt-rubber binders. These asphalt-rubber binders were obtained with penetration grade asphalt (AC 50/70) mixed with 21% and 25% of crumb rubber in weight. The rubber was recycled from unserviceable tires using the ambient grinding process. Hot mixes made with the conventional binder AC 5...

  13. Optimization of technical measures for improving high-temperature performance of asphalt-rubber mixture

    Institute of Scientific and Technical Information of China (English)

    Chuan Xiao; Tianqing Ling; Yanjun Qiu

    2013-01-01

    Asphalt-rubber pavements often become dam-aged in high-temperature regions and appear rutted or wavy, and experience slippage. To improve the high-tem-perature performance of the asphalt-rubber mixture, tech-nical measurements, such as, the optimal adjustment of gradation, technique of composite modification, and con-trol of compaction were investigated. An optimal adjust-ment of aggregate gradation based on stone matrix asphalt improves the high-temperature stability of the asphalt-rubber mixture significantly. Through composite modifi-cation, the effect of asphalt-rubber modification was enhanced, and the dynamic stability and relative defor-mation indices of the asphalt-rubber mixture were improved significantly. Furthermore, compaction parame-ters had a significant influence on the high-temperature stability of the asphalt-rubber mixture. The rolling times for compacting the asphalt-rubber mixture should be controlled to within 18-20 round-trips at a molding tem-perature at 180 ?C;if the rolling time is a 12 round-trip, the compaction temperature of the asphalt-rubber mixture should be controlled between 180 and 190 ?C.

  14. Influence of crumb rubber and digestion time on the asphalt rubber binders

    OpenAIRE

    Neto, Silvrano Adonias Dantas; Farias, Márcio Muniz de; Pais, Jorge C.; Pereira, Paulo A. A.; Sousa, Jorge B.

    2006-01-01

    This paper shows the results of a study about the mechanical behavior of dense graded asphalt-rubber hot mixes prepared with two different types of asphalt-rubber binders. These asphalt-rubber binders were obtained with penetration grade asphalt (AC 50/70) mixed with 21% and 25% of crumb rubber in weight. The rubber was recycled from unserviceable tires using the ambient grinding process. Hot mixes made with the conventional binder AC 50/70 were also studied for comparison. The...

  15. Investigation of the Physical and Molecular Properties of Asphalt Binders Processed with Used Motor Oils

    Directory of Open Access Journals (Sweden)

    Mohyeldin Ragab

    2015-01-01

    Full Text Available In this work we investigated the performance aspects of addition of used motor oils (UMO to neat and crumb rubber modified asphalts (CRMA and related that to the change of molecular size distribution of modified asphalt’s fractions; asphaltenes, saturates, naphthene aromatics, and polar aromatics. Based on the results of temperature sweep viscoelastic tests, addition of crumb rubber modifier (CRM alone or with UMO results in the formation of internal network within the modified asphalt. Based on the results of short and long term aged asphalts, the utilization of combination of UMO and CRM enhanced the aging behavior of asphalt. Bending beam rheometer was utilized to investigate the low temperature behavior of UMO modified asphalts. Based on those tests, the utilization of the UMO and CRM enhanced the low temperature properties of asphalts. Based on the results of the asphalt separation tests and the Gel Permeation Chromatography (GPC analysis, it was found that saturates and naphthene aromatics are the two asphalt fractions that have similar molecular size fractions as those of UMO. However, UMO only shifts the molecular sizes of saturates after interaction with asphalt. Results also show that polar aromatics pose higher molecular size structures than UMO.

  16. Preparation, Characterization and Hot Storage Stability of Asphalt Modified by Waste Polyethylene Packaging

    Institute of Scientific and Technical Information of China (English)

    Changqing Fang; Ying Zhang; Qian yu; Xing Zhou; Dagang Guo; Ruien Yu; Min Zhang

    2013-01-01

    Waste polyethylene packaging (WPE) was used to modify asphalt,and hot storage stability of the modified asphalt was studied in this paper.The morphological change and component loss of WPE modified asphalt were characterized by fluorescence microscopy,Fourier transform infrared spectroscopy (FT-IR),differential scanning calorimetry (DSC),thermogravimetry (TG) and isolation testing.In addition,the mechanism of the hot storage stability of WPE modified asphalt was discussed.The results showed that the modification of asphalt with WPE was a physical process.It was found that the filament or partly network-like structure formed in the modified asphalt system was beneficial to improving the hot storage stability.Moreover,the addition of WPE resulted in a decrease in both the light components volatilization and the macromolecules decomposition of asphalt.It was demonstrated that when the content of WPE in matrix asphalt was less than 10 wt%,the service performances of modified asphalt could be better.

  17. The Silurian Reservoir Bed-Differentiated Asphalts in Tarim Basin and Modeling Experiments on Their Origin

    Institute of Scientific and Technical Information of China (English)

    刘洛夫; 刘宏江; 王洪玉; 曾溅辉

    2002-01-01

    There is a type of asphalt that originated from differentiation from reservoir bed (named reservoir bed-differentiated asphalt) in the Silurian asphaltic sandstones of the Tarim Basin. These asphalts are the result of second-time charging of hydrocarbons into the Silurian reservoir, which were derived from Lower Paleozoic source rocks. Asphalt was differentiated from the reservoir bed in the hydrocarbon gathering area of secondary migration. The differen tiation is caused by changes in reservoir physical properties when pearl or chain hydrocarbons migrating through and gathering in the reservoir bed, and light components are lost and heavy ones are involved in the formation of asphalt or heavy oil. There are two kinds of occurrence of these asphalts in the Silurian system of the Tarim Basin. One is the poor heavy oil layer with lower oil saturation in trap and the other is scattered hydrocarbon distributed along the transport layer and unconformity surface. Reservoir bed-differentiated asphalts have two characteristics: total hydrocarbon content is high in extractable organic matter and the ratio of saturated to aromatic hydrocarbon is usually greater than unity. The physically modeling experiment has confirmed these characteristics and the genesis of the reservoir bed-differentiated asphalts.

  18. The Silurian Reservoir Bed—Differentiated Asphalts in Tarim Basin and Modeling Experiments on Their Origin

    Institute of Scientific and Technical Information of China (English)

    刘洛夫; 刘宏江; 等

    2002-01-01

    There is a type of asphalt that originated from differentiation from reservoir bed (named reservoir bed-differentiated asphalt)in the Silurian asphaltic sandstones of the Tarim Basin.These asphalts are the result of second-time charging of hydrocarbons into the Silurian reservoir,which were derived from Lower Paleozoic source rocks.Asphalt was differentiated from the reservoir bed in the hydrocarbon gathering area of secondary migration.The different-tiation is caused by changes in reservoir physical properties when pearl or chain hydrocarbons migrating through and gathering in the reservoir bed,and light components are lost and heavy ones are involved in the formation of asphalt or heavy oil.There are two kinds of occurrence of these asphalts in the Silurian system of the Tarim Basin.One is the poor heavy oil layer with lower oil saturation in trap and the other is scattered hydrocarbon distributed along the trans-port layer and unconformity surface.Reservoir bed-differentiated asphalts have two characteris-tics:total hydrocarbon content is high in extractable organic matter and the ratio of saturated to aromatic hydrocarbon is usually greater than unity.The physically modeling experiment has confirmed these characteristics and the genesis of the reservoir bed-differentiated asphalts.

  19. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts.

    Science.gov (United States)

    Zhang, Feng; Yu, Jianying; Wu, Shaopeng

    2010-10-15

    Oxidative ageing as an inevitable process in practical road paving has a great effect on the properties of polymer-modified asphalts (PMAs). In this article, the effect of short-term and long-term oxidative ageing on the rheological, physical properties and the morphology of the styrene-butadiene-styrene (SBS)- and storage-stable SBS/sulfur-modified asphalts was studied, respectively. The analysis on the rheological and physical properties of the PMAs before and after ageing showed the two major effects of ageing. On one hand, ageing prompted the degradation of polymer and increased the viscous behaviour of the modified binders, on the other, ageing changed the asphalt compositions and improved the elastic behaviour of the modified binders. The final performance of the aged binders depended on the combined effect. After ageing, the storage-stable SBS/sulfur-modified asphalts showed an obvious viscous behaviour compare with the SBS-modified asphalts and this led to an improved low-temperature creep property. The rutting resistance of the SBS-modified asphalts declined by the addition of sulfur due to the structural instability of the SBS/sulfur-modified asphalts. The rheological properties of the modified binders before and after ageing also depended strongly on the structural characteristics of SBS. The observation by using optical microscopy showed the compatibility between asphalt and SBS was improved with further ageing, especially for the storage-stable SBS/sulfur-modified asphalts. PMID:20637542

  20. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts.

    Science.gov (United States)

    Zhang, Feng; Yu, Jianying; Wu, Shaopeng

    2010-10-15

    Oxidative ageing as an inevitable process in practical road paving has a great effect on the properties of polymer-modified asphalts (PMAs). In this article, the effect of short-term and long-term oxidative ageing on the rheological, physical properties and the morphology of the styrene-butadiene-styrene (SBS)- and storage-stable SBS/sulfur-modified asphalts was studied, respectively. The analysis on the rheological and physical properties of the PMAs before and after ageing showed the two major effects of ageing. On one hand, ageing prompted the degradation of polymer and increased the viscous behaviour of the modified binders, on the other, ageing changed the asphalt compositions and improved the elastic behaviour of the modified binders. The final performance of the aged binders depended on the combined effect. After ageing, the storage-stable SBS/sulfur-modified asphalts showed an obvious viscous behaviour compare with the SBS-modified asphalts and this led to an improved low-temperature creep property. The rutting resistance of the SBS-modified asphalts declined by the addition of sulfur due to the structural instability of the SBS/sulfur-modified asphalts. The rheological properties of the modified binders before and after ageing also depended strongly on the structural characteristics of SBS. The observation by using optical microscopy showed the compatibility between asphalt and SBS was improved with further ageing, especially for the storage-stable SBS/sulfur-modified asphalts.

  1. Laboratory and field evaluation of hot mix asphalt with high contents of reclaimed asphalt pavement

    Science.gov (United States)

    Van Winkle, Clinton Isaac

    Currently in Iowa, the amount of RAP materials allowed for the surface layer is limited to 15% by weight. The objective of this project was to develop quality standards for inclusion of RAP content higher than 15% in asphalt mixtures. To meet Superpave mix design requirements, it was necessary to fractionate the RAP materials. Based on the extensive sieve-by-sieve analysis of RAP materials, the optimum sieve size to fractionate RAP materials was identified. To determine if the higher percentage of RAP materials than 15% can be used in Iowa's state highway, three test sections with 30.0%, 35.5% and 39.2% of RAP materials were constructed on Highway 6 in Iowa City. The construction of the field test sections was monitored and the cores were obtained to measure field densities of test sections. Field mixtures collected from test sections were compacted in the laboratory in order to test the moisture sensitivity using a Hamburg Wheel Tracking Device. The binder was extracted from the field mixtures with varying amounts of RAP materials and tested to determine the effects of RAP materials on the PG grade of a virgin binder. Field cores were taken from the various mix designs to determine the percent density of each test section. A condition survey of the test sections was then performed to evaluate the short-term performance.

  2. Shakedown analysis of anisotropic asphalt concrete pavements with clay subgrade

    Energy Technology Data Exchange (ETDEWEB)

    Boulbibane, M.; Collins, I.F. [Auckland Univ., Auckland (New Zealand). Dept. of Engineering Science; Weichert, D. [RWTH-Aachen Inst. of General Mechanics, Aachen (Germany); Raad, L. [Alaska-Fairbanks Univ., Fairbanks, AK (United States). Transportation and Research Centre

    2000-08-04

    A mathematical model has been presented which can predict the effect of inherent anisotropic cohesion on the long-term behaviour of multilayered pavements. The model is based on the lower bound theorem of shakedown analysis and makes allowances for variations of soil strength with direction. Pavements operating above the critical shakedown load exhibit plastic strains under long term repeated loading conditions and eventually result in deep ruts. This model was used to examine the influence of subgrade properties on the shakedown behaviour of two-layer pavement systems consisting of an asphalt concrete layer and a granular base over a clay subgrade. The shakedown load for pavements under repeated loadings was estimated and the effects of variables such as temperature, asphalt thickness, stiffness and strength were determined. The materials in the various layers of the pavement were modeled as elastic-plastic Mohr-Coulomb materials. 38 refs., 3 tabs., 5 figs.

  3. Decontamination by shotblasting of radioactivity deposited on an asphalt road

    International Nuclear Information System (INIS)

    Long-lived fission products may be deposited in the environment after a serious reactor accident. From previous experiments it is known that if firehosing is to be used for decontamination it has to be done soon after the deposition. It is therefore worthwhile to study another decontamination method. An experimental study has been conducted of how well shotblasting can remove contamination from an asphalt road. In shotblasting a thin layer of the surface is loosened by the impact of small steel balls, and in the same procedure the surface dust is vacuumed up and the steel balls recovered. The contaminant was 86Rb, which behaves as caesium. As reference, the weathering of identical contamination on an asphalt road, a concrete road and a road covered with small concrete stones was studied concurrently. (author)

  4. 10CFR61 waste form conformance program for asphalted radwaste

    International Nuclear Information System (INIS)

    With the enactment of Title 10, Code of Federal Regulations, Part 61, ''Licensing Requirements for Land Disposal of Radioactive Waste'' came the imposition of new requirements on licensees who dispose of radioactive waste via shallow land burial. Specifically, 10CFR61 both imposed a waste classification system requiring segregation of waste according to hazard and established waste performance characteristics required to enhance stability of the burial site. In order to provide licensees with guidance regarding implementation of applicable requirements of 10CFR61, the NRC Low Level Waste Licensing Branch issued two Technical Positions. To demonstrate compliance of asphalted radwaste produced with oxidized asphalt with 10CRF61 criteria and the NRC's Technical Position, five utilities combined resources. The five utilities sponsoring the program were Public Service Electric and Gas Company, Niagara Mohawk Power Company, Detroit Edison Company, New Hampshire Yankee, and Consumers Power Company

  5. Integrated coke, asphalt and jet fuel production process and apparatus

    Science.gov (United States)

    Shang, Jer Y.

    1991-01-01

    A process and apparatus for the production of coke, asphalt and jet fuel m a feed of fossil fuels containing volatile carbon compounds therein is disclosed. The process includes the steps of pyrolyzing the feed in an entrained bed pyrolyzing means, separating the volatile pyrolysis products from the solid pyrolysis products removing at least one coke from the solid pyrolysis products, fractionating the volatile pyrolysis products to produce an overhead stream and a bottom stream which is useful as asphalt for road pavement, condensing the overhead stream to produce a condensed liquid fraction and a noncondensable, gaseous fraction, and removing water from the condensed liquid fraction to produce a jet fuel-containing product. The disclosed apparatus is useful for practicing the foregoing process. the process provides a useful method of mass producing and jet fuels from materials such as coal, oil shale and tar sands.

  6. New method to quantitatively evaluate the homogeneity of asphalt mixtures

    Institute of Scientific and Technical Information of China (English)

    WU Wen-liang; ZHANG Xiao-ning; WANG Duan-yi; LI Zhi

    2009-01-01

    To evaluate the homogeneity of asphalt mixtures, the images of sections obtained by cutting the as-phah mixtures specimen horizontally or vertically were analyzed with digital image processing techniques, and the particle area ratio was achieved by applying sector scan for horizontal specimen and vertical scan for vertical one. The research result indicates that the influence of random distribution of aggregates in cutting the specimen can be eliminated by using colored aggregates to distinguish coarse and fine aggregates and using color threshold to segment the images. Choosing three typical gradations, proving particle area ratio obeying normal distribution and using the variability of particle area ratio as an index, it is feasible to quantitatively evaluate the homogenei-ty of asphalt mixtures.

  7. Evidence of Multi-Stage Hydrocarbon Charging and Biodegradation of the Silurian Asphaltic Sandstones in the Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    刘洛夫

    2002-01-01

    Asphalts distributed widely in the Silurian sandstones of the Tarim Basin include dry asphalt, soft asphalt and heavy oil. These asphaltic sandstones underwent multi-episodic sedimentary and tectonic events, and their occurrence is diverse and complex, being mixed with normal oil usually. So far, very little work has been done on the asphaltic sandstone origin and hydrocarbon charging ages. After detailed study on the Silurian sandstones, the following highlights were obtained from the analytical results: distribution of the mixed asphalt, heavy oil and normal oil in the Silurian sandstones is the result of multi-stage hydrocarbon charging from the Lower Paleozoic marine source rocks; the characters of asphalts formed from oils of different charging ages are of difference; the most important process constraining.the asphaltic sandstone origin is thought to be biodegradation.

  8. Assessment of asphalt mixtures characteristics through GPR testing

    Science.gov (United States)

    Pais, Jorge; Fernandes, Francisco

    2014-05-01

    Road pavements are composed by granular and asphalt layers, placed over the pavement subgrade, which are designed to resist to traffic and climatic effects. Pavement distresses include permanent deformation mainly due to the contribution of the subgrade and fatigue cracking in the asphalt layers. Fatigue cracking is the main pavement distress and is responsible for the main rehabilitations carried out in road pavements which leads, in most cases, to the pavement reconstruction due to the severity of the cracking observed in many roads. For a given aggregate gradation, the fatigue cracking resistance is related to the proportions of the components in the asphalt mixtures, namely the void content and the binder content. Also the presence of water, or moisture, has an important influence in the fatigue resistance, and its effect is characterized by a reduction in the fatigue cracking resistance. The characteristics of the asphalt mixtures applied in road pavements can be assessed in laboratory through the testing of cores extracted from the pavement. These cores are extracted some representative section of the pavement, usually equally spaced in the road. Due to the construction process, the representative sections of the pavement don't allow to identify the quality of the whole pavement. Thus, the use of continuous measurement is essential to ensure the perfect assessment of the pavement quality and the use of the GPR assumes a paramount importance. Thus, this communication presents several GPR tests carried out on pavement slabs produced in laboratory with different void content, binder content and moisture content in order to establish different classifiers that will allow the identification of this condition during regular inspections. Furthermore, tests carried on specimens before and after fatigue tests will allow to calculate similar parameters to estimate the state of conservation of pavements in terms of stiffness and the presence of cracks. This work is a

  9. INVESTIGATION OF ASPHALT PAVEMENT WITH ADDED CRUMB RUBBER

    OpenAIRE

    Mandula, Jan; Olexa, Tomaš; Holubka, Mariya; Salaiova, Brigita

    2014-01-01

    Waste tires must be recycled in environmentally safe ways that meet civil engineering concerns while fulfilling standards for construction materials. Used tires can be processed into rubber powders with particle sizes of 0–2 mm, a suitable fine aggregate for mixing into road pavements. We tested asphalt mixtures with rubber added using the dry method, comparing their properties with a traditional mixture. We tested asphalt–rubber mixtures with rubber incorporated at either ambient temperature...

  10. New experimental methods to monitor and characterize asphalt rubber binders

    OpenAIRE

    Peralta, J.; Silva, Hugo Manuel Ribeiro Dias da; Pais, Jorge C.

    2010-01-01

    The need for continuous quality improvement of the road pavements, leads to the development of new binders, such as asphalt rubber (AR). AR is produced by the digestion of crumb rubber from used tires on bitumen. The resulting AR is a heterogeneous material with high viscosity. The study of this product during its production is essential due to the sudden and sharp increase in the volume of AR in this phase. Knowledge of the extent of this phenomenon has obvious implications in...

  11. Improvement of the functional pavement quality with asphalt rubber mixtures

    OpenAIRE

    Fontes, Liseane P. T. L.; Pereira, Paulo A. A.; Pais, Jorge C.; Trichês, Glicério

    2006-01-01

    Skid resistance and texture are important safety characteristics which need to be considered in flexible pavement design, maintenance and rehabilitation. The main objective of this paper is to optimize surface texture characteristics in asphalt rubber pavements, mainly macrotexture to reduce splash, spray and hydroplaning and microtexture to increase friction at low and high speeds. The objective was accomplished by measuring the friction surface with two different tests: (i) B...

  12. Production technologies and analysis of use of rubberised asphalt

    OpenAIRE

    Pevec, Rok

    2013-01-01

    Used tires present a major enviormental problem worldwide since most of them are burned as fuel in the cement industry, but most of them lie illegally in landfills in nature. It is identified and confirmed in practice that the properties of bituminous binder, to which rubber particles, which are the product of recycling waste automobile and truck tires, are added, and consequently also the properties of asphalt mixtures are significantly improved. Research in this area and the ...

  13. Evaluation of nuclear asphalt-content gauges. Final report

    International Nuclear Information System (INIS)

    The study evaluated the accuracy and precision of the Troxler, Model 3241-C, and CPN, Model AC-2, Nuclear Asphalt Content Gauges. To achieve precisions at plus or minus 0.15% 95% of the time, it was necessary to establish special procedures for making test samples, controlling environment, and calibration. Both gauges provided acceptable results utilizing a 3-point calibration. Their use in the field would be acceptable when the proper procedures are followed

  14. Structural Design of Asphalt Pavement for Low Cost Rural Roads

    Institute of Scientific and Technical Information of China (English)

    Yuan Goulin; Chen Rongshen

    2006-01-01

    On the basis of the equivalent axle load action frequency, the traffic classifications of rural roads as well as their corresponding types are classified. The asphalt pavement structure, road surface types and thickness of the rural roads are suggested for the various action frequency of the equivalent axle load. Furthermore, the roadbase thickness graphs are provided according to different equivalent axle load action frequency with different roadbed modulus and road surface modulus taken into account.

  15. Factory performance evaluations of engineering controls for asphalt paving equipment.

    Science.gov (United States)

    Mead, K R; Mickelsen, R L; Brumagin, T E

    1999-08-01

    This article describes a unique analytical tool to assist the development and implementation of engineering controls for the asphalt paving industry. Through an agreement with the U.S. Department of Transportation, the National Asphalt Pavement Association (NAPA) requested that the National Institute for Occupational Safety and Health (NIOSH) assist U.S. manufacturers of asphalt paving equipment with the development and evaluation of engineering controls. The intended function of the controls was to capture and remove asphalt emissions generated during the paving process. NIOSH engineers developed a protocol to evaluate prototype engineering controls using qualitative smoke and quantitative tracer gas methods. Video recordings documented each prototype's ability to capture theatrical smoke under "managed" indoor conditions. Sulfur hexafluoride (SF6), released as a tracer gas, enabled quantification of the capture efficiency and exhaust flow rate for each prototype. During indoor evaluations, individual prototypes' capture efficiencies averaged from 7 percent to 100 percent. Outdoor evaluations resulted in average capture efficiencies ranging from 81 percent down to 1 percent as wind gusts disrupted the ability of the controls to capture the SF6. The tracer gas testing protocol successfully revealed deficiencies in prototype designs which otherwise may have gone undetected. It also showed that the combination of a good enclosure and higher exhaust ventilation rate provided the highest capture efficiency. Some manufacturers used the stationary evaluation results to compare performances among multiple hood designs. All the manufacturers identified areas where their prototype designs were susceptible to cross-draft interferences. These stationary performance evaluations proved to be a valuable method to identify strengths and weaknesses in individual designs and subsequently optimize those designs prior to expensive analytical field studies. PMID:10462852

  16. Analyzing the influence of manufacturing conditions of reclaimed asphalt concrete on the characteristics of the asphalt binder: development of a gradual binder extraction method

    Science.gov (United States)

    Navaro, J.; Bruneau, D.; Drouadaine, I.; Pouteau, B.; Colin, J.; Dony, A.

    2012-05-01

    When asphalt concrete is manufactured incorporating a high percentage (almost 70%) of reclaimed materials from the deconstruction of road surfaces under renovation, and when the corresponding production device is designed specifically to reduce the energy input need (lowering the production temperature), the resulting manufacturing process contributes to the protection of the environment and reduces production costs. However, to meet the quality requirements of the finished product, virgin materials of appropriate quality and quantity must also be added (mineral aggregates and new asphalt binder) and control systems set up to quantify and optimize the parameters involved (thus avoiding the guess work which still often prevails today). It was for this reason that a new experimental technique described here was devised, which will ultimately be used in asphalt concrete production plants. The technique involves lixiviating reclaimed asphalt concrete using a chlorinated solvent; the resulting solute is collected gradually, then the mixture of binders (virgin and reclaimed asphalt concrete) can be characterized and their mass fractions quantified using a combination of UV and IR spectrometry. With this experimental technique we were able to assess the extent to which the reclaimed asphalt pavement binder participates in the agglomeration and cohesion of the reclaimed asphalt concrete. This assessment was made in terms of the main parameters in the production process, temperature of the materials and mixing time.

  17. Representative volume element of asphalt pavement for electromagnetic measurements

    Directory of Open Access Journals (Sweden)

    Terhi Pellinen

    2015-02-01

    Full Text Available The motivation for this study was to investigate the representative volume element (RVE needed to correlate the nondestructive electromagnetic (EM measurements with the conventional destructive asphalt pavement quality control measurements. A large pavement rehabilitation contract was used as the test site for the experiment. Pavement cores were drilled from the same locations where the stationary and continuous Ground Penetrating Radar (GPR measurements were obtained. Laboratory measurements included testing the bulk density of cores using two methods, the surface-saturated dry method and determining bulk density by dimensions. Also, Vector Network Analyzer (VNA and the through specimen transmission configuration were employed at microwave frequencies to measure the reference dielectric constant of cores using two different footprint areas and therefore volume elements. The RVE for EM measurements turns out to be frequency dependent; therefore in addition to being dependent on asphalt mixture type and method of obtaining bulk density, it is dependent on the resolution of the EM method used. Then, although the average bulk property results agreed with theoretical formulations of higher core air void content giving a lower dielectric constant, for the individual cores there was no correlation for the VNA measurements because the volume element seizes deviated. Similarly, GPR technique was unable to capture the spatial variation of pavement air voids measured from the 150-mm drill cores. More research is needed to determine the usable RVE for asphalt.

  18. Evaluation of Colemanite Waste as Aggregate Hot Mix Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Nihat MOROVA

    2015-09-01

    Full Text Available In this study usability of waste colemanite which is obtained after cutting block colemanite for giving proper shape to blocks as an aggregate in hot mix asphalt. For this aim asphalt concrete samples were prepared with four different aggregate groups and optimum bitumen content was determined. First of all only limestone was used as an aggregate. After that, only colemanite aggregate was used with same aggregate gradation. Then, the next step of the study, Marshall samples were produced by changing coarse and fine aggregate gradation as limestone and colemanite and Marshall test were conducted. When evaluated the results samples which produced with only limestone aggregate gave the maximum Marshall Stability value. When handled other mixture groups (Only colemanite, colemanite as coarse aggregate-limestone as fine aggregate, colemanite as fine aggregate-limestone as coarse aggregate all groups were verified specification limits. As a result, especially in areas where there is widespread colemanite waste, if transportation costs did not exceed the cost of limestone, colemanite stone waste could be used instead of limestone in asphalt concrete mixtures as fine aggregate

  19. Energy and exergy analysis in an asphalt plant's rotary dryer

    International Nuclear Information System (INIS)

    In this paper, energy and exergy analyses of a rotary dryer employed in a Hot Mix Asphalt (HMA) plant for heating and drying of the aggregates in the mixture is presented. In the analysis, the exergy method in addition to the more conventional energy analysis, is employed to identify and evaluate the thermodynamic losses. The results show that, at design conditions, the plant performs with energy and exergy efficiencies of 0.89 and 0.18, respectively. The energy losses are mainly due to the flue gases. The exergy distribution indicates that the combustion and the heat transfer at different temperatures in the burner yield the highest exergy destruction in the process. A parametric study is conducted for the plant under various operational production parameters, including different humidities of the aggregates and filler content in aggregates, working temperatures and ambient conditions, in order to determine the parameters that affect the plant performance. It is shown that the solids humidity has a great impact on energy requirements. A better and sustainable use of the heat source employed in the dryer is proposed to avoid the high irreversibilities found. Furthermore, operating corrections in the mix or in the exhaust gas temperature are proposed to optimize the performance of the plant. - Research highlights: → Identify main energy losses and irreversibilities in the dryer of an asphalt plant. → Optimize operating conditions in an Asphalt plant. → Improve energy savings and availability of the drying and heating process. → Encourage the use of a cogeneration system.

  20. Use of steel slag aggregate in asphalt concrete mixes

    Energy Technology Data Exchange (ETDEWEB)

    Asi, I.M.; Qasrawi, Y.; Shalabi, F.I. [Hashemite Univ., Zarqa (Jordan). Dept. of Civil Engineering

    2007-08-15

    The physical, chemical and mechanical properties of generated steel slag aggregates (SSA) were studied in order to investigate their potential use in asphalt concrete (AC) mixes. Five AC mixes were investigated, notably an AC mix with a 100 per cent limestone aggregate, and mixes comprised of 25, 50, 75, and 100 per cent SSA coarse aggregates. A superpave mix design was used to determine optimum asphalt content (OAC). Steps included the selection of a design aggregate structure, optimization of the asphalt content for the structure, and an evaluation of the moisture sensitivity of the design mixture. The effectiveness of the samples were assessed by their ability to improve indirect tensile strength (ITS); resilient and creep modulus; fatigue life; and stripping and rutting resistance. Various AC mixes containing the SSA were then evaluated. A gyratory compactor was used to compact the test samples, which were then subjected to comprehensive mechanical evaluations. Statistical analyses were then performed to examine the significance of the SSA percentage in the changing ITS values using analysis of variance (ANOVA) calculations. Results of the study indicated that SSA met both superpave consensus properties and Jordanian standards source properties. Chemical and toxic levels were within allowable limits. It was concluded that optimal the replacement percentage of SSA was 25 per cent. 18 refs., 9 tabs., 21 figs.

  1. Airborne exposures to PAH and PM2.5 particles for road paving workers applying conventional asphalt and crumb rubber modified asphalt.

    Science.gov (United States)

    Watts, R R; Wallingford, K M; Williams, R W; House, D E; Lewtas, J

    1998-01-01

    Personal exposure monitoring was conducted for road paving workers in three states. A research objective was to characterize and compare occupational exposures to fine respirable particles (asphalt and asphalt containing crumb rubber from shredded tires. Workers not exposed to asphalt fume were also included for comparison (to support the biomarker component of this study). The rubber content of the crumb rubber modified (CRM) asphalt at the three study sites was 12, 15, and 20%. A comparison of some specific job categories from two sites indicates greater potential carcinogenic PAH exposures during CRM asphalt work, however, the site with the greatest overall exposures did not indicate any differences for specific jobs. A statistical analysis of means for fine particle, pyrene and total carcinogenic PAH personal exposure shows, with two exceptions, there were no differences in exposures for these three measurement variables. One site shows significantly elevated pyrene exposure for CRM asphalt workers and another site similarly shows greater carcinogenic PAH exposure for CRM asphalt workers. Conventional and CRM asphalt worker airborne exposures to the PAH carcinogen marker, BaP, were very low with concentrations comparable to ambient air in many cities. However, this study demonstrates that asphalt road paving workers are exposed to elevated airborne concentrations of a group of unknown compounds that likely consist of the carcinogenic PAHs benz(a)anthracene, chrysene and methylated derivatives of both. The research described in this article has been reviewed in accordance with U.S. Environmental Protection Agency policy and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use. PMID:9577752

  2. 77 FR 50651 - Approval and Promulgation of Air Quality Implementation Plans; New Hampshire; Hot Mix Asphalt Plants

    Science.gov (United States)

    2012-08-22

    ... Mix Asphalt Plants AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA... Hampshire Hot Mix Asphalt Plant Rule at Env-A 2703.02(a). This rule establishes and requires limitations on visible emissions from all hot mix asphalt plants. This revision is consistent with the maintenance of...

  3. Thermal behavior of crumb-rubber modified asphalt concrete mixtures

    Science.gov (United States)

    Epps, Amy Louise

    Thermal cracking is one of the primary forms of distress in asphalt concrete pavements, resulting from either a single drop in temperature to an extreme low or from multiple temperature cycles above the fracture temperature of the asphalt-aggregate mixture. The first mode described is low temperature cracking; the second is thermal fatigue. The addition of crumb-rubber, manufactured from scrap tires, to the binder in asphalt concrete pavements has been suggested to minimize both types of thermal cracking. Four experiments were designed and completed to evaluate the thermal behavior of crumb-rubber modified (CRM) asphalt-aggregate mixtures. Modified and unmodified mixture response to thermal stresses was measured in four laboratory tests. The Thermal Stress Restrained Specimen Test (TSRST) and the Indirect Tensile Test (IDT) were used to compare mixture resistance to low temperature cracking. Modified mixtures showed improved performance, and cooling rate did not affect mixture resistance according to the statistical analysis. Therefore results from tests with faster rates can predict performance under slower field rates. In comparison, predicted fracture temperatures and stresses (IDT) were generally higher than measured values (TSRST). In addition, predicted fracture temperatures from binder test results demonstrated that binder testing alone is not sufficient to evaluate CRM mixtures. Thermal fatigue was explored in the third experiment using conventional load-induced fatigue tests with conditions selected to simulate daily temperature fluctuations. Test results indicated that thermal fatigue may contribute to transverse cracking in asphalt pavements. Both unmodified and modified mixtures had a finite capacity to withstand daily temperature fluctuations coupled with cold temperatures. Modified mixtures again exhibited improved performance. The fourth experiment examined fracture properties of modified and unmodified mixtures using a common fracture toughness test

  4. 40 CFR Table 1 of Subpart Aaaaaaa... - Emission Limits for Asphalt Processing (Refining) Operations

    Science.gov (United States)

    2010-07-01

    ... following emission limits * * * 1. Blowing stills a. Limit PAH emissions to 0.003 lb/ton of asphalt charged to the blowing stills;or b. Limit PM emissions to 1.2 lb/ton of asphalt charged to the blowing stills....

  5. Dynamic Mechanical Characterizations and Road Performances of Flame Retardant Asphalt Mortars and Concretes

    Institute of Scientific and Technical Information of China (English)

    QIN Xiantao; ZHU Siyue; LI Zuzhong; CHEN Shuanfa

    2015-01-01

    To research the dynamic mechanical properties and road performances of flame retardant asphalt mortars and mixtures, four different asphalt mortars/mixtures were prepared: a reference group and three asphalt mortars/mixtures containing composite lfame retardant materials (M-FRs) of different proportions. Temperature sweep, frequency sweep, repeated creep test, force ductility test and bending beam rheological test were carried out to research the dynamic mechanical properties of asphalt mortars containing M-FRs; wheel-tracking test, low-temperature bending test and freeze-thaw split test were used to study the road performances of asphalt mixtures containing M-FRs. The results show that high-temperature performances of the three lfame retardant asphalt mortars improve greatly, while low-temperature cracking resistances decline. Both high-temperature performances and water stabilities of asphalt mixtures containing M-FRs are quite good and exceed the speciifcation requirements. However, their low-temperature performances decline in different degrees. In summary, besides their good lfame retardancy, the lfame retardant asphalt mortars and mixtures also exhibit acceptable road performance.

  6. Investigation of self healing behaviour of asphalt mixes using beam on elastic foundation setup

    NARCIS (Netherlands)

    Qiu, J.; Molenaar, A.A.A.; Van de Ven, M.F.C.; Wu, S.; Yu, J.

    2012-01-01

    Self healing of asphalt mixes is known for more than four decades. However, it is a complex phenomenon which depends on the duration of the rest period, temperature, crack size, etc. In order to quantify the self healing behaviour of asphalt mixes, a test setup was proposed in this research using an

  7. ENHANCING ASPHALT RHEOLOGICAL BEHAVIOR AND AGING SUSCEPTIBILITY USING BIO-CHAR AND NANO-CLAY

    Directory of Open Access Journals (Sweden)

    Renaldo C. Walters

    2014-01-01

    Full Text Available The life expectancy of Asphalt Binder (AB has been negatively impacted by the harsh bombardment of UV rays. UV rays cause asphalt to oxidize faster, which results in deterioration of asphalt rheological characteristics that can lead to pavement distresses. This study investigates the impact of bio-char and nano-clay of asphalt rheological properties. Two nano scale materials were used for this study were nano-clay and bio-char. Nano-clay (Cloisite 30B is a naturally occurring inorganic mineral. Bio-char is the waste product from bio-binder production. Bio-binder is produced from swine manure using a thermochemical conversion process. This process is then followed by a filtration procedure where the bio-char is produced. Chemical and physical properties of bio-char showed a significant presence of carbon which could in turn enhance asphalt flow properties and reduce the rate of asphalt oxidation. In this study several mixtures are designed and evaluated using Rotational Viscometer testing (RV and X-Ray Diffraction (XRD. Nano-clay is blended at 2 and 4% by weight, with and without bio-binder (5% by weight of dry mass. Bio-char is grinded to nano scale and added to the virgin asphalt binder (PG 64-22 at 2, 5 and 10% by weight. The study results showed that introduction of nano-clay could be effective in reducing temperature susceptibility of asphalt binder.

  8. Asphalt Pavement Aging and Temperature Dependent Properties Using Functionally Graded Viscoelastic Model

    Science.gov (United States)

    Dave, Eshan V.

    2009-01-01

    Asphalt concrete pavements are inherently graded viscoelastic structures. Oxidative aging of asphalt binder and temperature cycling due to climatic conditions being the major cause of non-homogeneity. Current pavement analysis and simulation procedures dwell on the use of layered approach to account for these non-homogeneities. The conventional…

  9. Determination of Required Energy Action at Formation of Asphalt Concrete Mixture

    OpenAIRE

    B. M. Khroustalev; V. N. Romaniuok

    2014-01-01

    A problem pertaining to determination of the concentrated exergy of the asphalt concrete mixture is considered in the paper. The paper shows the possibility to use the concentrated exergy of the asphalt concrete mixture for qualitative energy evaluation of mixing processes.

  10. 75 FR 12988 - National Emission Standards for Hazardous Air Pollutants for Area Sources: Asphalt Processing and...

    Science.gov (United States)

    2010-03-18

    ... the asphalt processing and asphalt roofing manufacturing area source category (74 FR 63236). Following... specified in Executive Order 13132, Federalism (64 FR 43255, August 10, 1999). This action does not..., Consultation and Coordination with Indian Tribal Governments (65 FR 67249, November 9, 2000). This...

  11. Distribution of radionuclides in the process of thermal decontamination of asphalt layers

    International Nuclear Information System (INIS)

    Autoradiographical analysis was used to investigate the radionuclides distribution in the process of thermal decontamination of asphalt. Cs-137 and Sr-90 were introduced in asphalt to simulate real contamination. It was found that penetration of these radionuclides is very small (about 1 mm). No significant emission of radionuclides was observed in the process of thermal decontamination

  12. Experimental Investigation of the Matching Relationship between Asphalt Particle and Reservoir Pore in Profile Control Process

    Directory of Open Access Journals (Sweden)

    Chengfeng Ren

    2016-01-01

    Full Text Available Modified sulfonated asphalt particles have a bright application prospect of the profile control of thick reservoirs due to the low cost, extensive sources, and good compatibility with reservoir. Nevertheless, the matching relationship between asphalt particles and reservoir pore has seldom been investigated till now. Oversized particles always block the near-wellbore area, which causes high injection pressures, while undersized particles cannot plug large pores. We designed a core for this experiment which has a high permeability zone in front of it and many pressure measuring points. We could quantitatively assess the matching relationship by measuring the on-way resistance coefficient, residual resistance factor, and relative change of permeability of man-made cores after injecting asphalt. Experimental results indicate that asphalt particles with sizes of 0.02 mm, 0.02–0.06 mm, and 0.08–0.1 mm match with reservoir permeability of 500 mD, 1000 mD, and 2000 mD, respectively. Undersized or oversized particles can reduce the conformance control effect, and the concentration of asphalt particles in the injectant can limit their migration ability. When the concentration of asphalt particles increases to 3000 mg/L, accumulations of asphalt particles can be caused in the formation, in which a scheme with asphalt particles alternative water injection is proposed to avoid the accumulation.

  13. Feasibility of using 100% Recycled Asphalt Pavement mixtures for road construction

    Science.gov (United States)

    Carlson, Russell Edgar, IV

    Recycled Asphalt Pavement (RAP) is the largest recycled good in the United States and 80 million tons are recycled yearly, saving taxpayers about $1.5 billion dollars. This paper explores the possibility of utilizing 100% RAP materials in asphalt pavement. Asphalt mixtures are produced at 135°C in a typical asphalt plant. However, at 135°C, not all binder from RAP materials may not become effective for coating aggregates. The main objective of the study is to determine the amount of effective binder available from RAP in the asphalt plant. The 100% RAP mixes have aged binder that can alter mix designs and interaction with virgin binder. In this study, to determine low temperature cracking resistance and fatigue performance, samples were prepared using a 100% RAP mix with no virgin binder and a 100% RAP mix with virgin asphalt binder to achieve the optimum binder content of the mix. Second, to determine the effectiveness of binder from RAP materials, compaction tests were performed by heating RAP materials at various temperatures. It was found that 100% RAP mixes cannot be feasible for field use if additional virgin binder is added to reach the optimum asphalt content. Based on limited test results, the low temperature grade was not within proper limits but the beam fatigue testing results were acceptable. Based on compaction test results, additional heating is needed to increase the effectiveness of asphalt binder from RAP materials.

  14. Damage detection and artificial healing of asphalt concrete after trafficking with a load simulator

    Science.gov (United States)

    Bueno, M.; Arraigada, M.; Partl, M. N.

    2016-08-01

    Artificial healing of asphalt concrete by induction heating requires the addition of electrically conductive and/or magnetic materials into the asphalt mixture. Hence, bitumen can be heated up by an alternating electromagnetic field, decreasing therefore its viscosity and allowing it to flow for closing cracks and recover bonding among the mineral aggregates.

  15. Airborne Exposures to Polycyclic Aromatic Compounds Among Workers in Asphalt Roofing Manufacturing Facilities.

    Science.gov (United States)

    Trumbore, David C; Osborn, Linda V; Johnson, Kathleen A; Fayerweather, William E

    2015-01-01

    We studied exposure of 151 workers to polycyclic aromatic compounds and asphalt emissions during the manufacturing of asphalt roofing products-including 64 workers from 10 asphalt plants producing oxidized, straight-run, cutback, and wax- or polymer-modified asphalts, and 87 workers from 11 roofing plants producing asphalt shingles and granulated roll roofing. The facilities were located throughout the United States and used asphalt from many refiners and crude oils. This article helps fill a gap in exposure data for asphalt roofing manufacturing workers by using a fluorescence technique that targets biologically active 4-6 ring polycyclic aromatic compounds and is strongly correlated with carcinogenic activity in animal studies. Worker exposures to polycyclic aromatic compounds were compared between manufacturing plants, at different temperatures and using different raw materials, and to important external benchmarks. High levels of fine limestone particulate in the plant air during roofing manufacturing increased polycyclic aromatic compound exposure, resulting in the hypothesis that the particulate brought adsorbed polycyclic aromatic compounds to the worker breathing zone. Elevated asphalt temperatures increased exposures during the pouring of asphalt. Co-exposures in these workplaces which act as confounders for both the measurement of total organic matter and fluorescence were detected and their influence discussed. Exposures to polycyclic aromatic compounds in asphalt roofing manufacturing facilities were lower than or similar to those reported in hot-mix paving application studies, and much below those reported in studies of hot application of built-up roofing asphalt. These relatively low exposures in manufacturing are primarily attributed to air emission controls in the facilities, and the relatively moderate temperatures, compared to built-up roofing, used in these facilities for oxidized asphalt. The exposure to polycyclic aromatic compounds was a very

  16. Modeling and Simulation of Flow and Formation Damage of Asphalt-Paved Roads

    Directory of Open Access Journals (Sweden)

    M. H. Alawi

    2013-01-01

    Full Text Available Porous asphalt is a standard asphalt built on aggregate storage bed which allows water to drain through it and reduces stormwater runoff. However, porosity of the porous asphalt and the storage bed may be effectively reduced due to trapping suspended solids from the water or from the asphalt damage. In this paper, we present mathematical modeling and numerical simulation of flow and damage of porous asphalt-paved roads. A mathematical model to describe the fine-particles transport carried by a two-phase flow in a porous medium is presented. The buoyancy, capillarity, and mixed relative permeabilities correlations to fit with the mixed-wet system are considered. Throughout this investigation, we monitor the changing of the fluids properties such as water saturation and solid properties such as porosity and permeability due to trapping the fine-particles.

  17. Road safety effects of porous asphalt: a systematic review of evaluation studies

    DEFF Research Database (Denmark)

    Elvik, R.; Greibe, Poul

    2005-01-01

    This paper presents a systematic review of studies that have evaluated the effects on road safety of porous asphalt. Porous asphalt is widely used on motorways in Europe, mainly in order to reduce traffic noise and increase road capacity. A meta-analysis was made of six studies, containing a total...... of eighteen estimates of the effect of porous asphalt on accident rates. No clear effect on road safety of porous asphalt was found. All summary estimates of effect indicated very small changes in accident rates and very few were statistically significant at conventional levels. Studies that have evaluated...... of these changes in risk factors on accident occurrence cannot be predicted. On the whole, the research that has been reported so far regarding road safety effects of porous asphalt is inconclusive. The studies are not of high quality and the findings are inconsistent....

  18. Effects of circulating fluidized bed combustion (CFBC) fly ashes as filler on the performances of asphalt

    Energy Technology Data Exchange (ETDEWEB)

    Qin Li; Hui Xu; Xiaoru Fu; Chen Chen; Jianping Zhai [Nanjing University, Nanjing (China). State Key Laboratory of Pollution Control and Resource Reuse

    2009-03-15

    This work investigated the potential of utilizing circulating fluidized bed combustion (CFBC) fly ashes (CFAs) as alternative filler, substituting mineral powders (MPs) that are widely used in asphalt concrete. Physico-chemical characteristics of the CFAs and MPs, as well as effects of different mix designs of CFAs and asphalt on asphalt performances were examined, including moisture susceptibility, viscosity, ductility, softening point, penetration, and antiaging performances. The results of the study show that generally the CFAs have greater effects than the MPs on improving the performances of asphalt, and that the specific surface area (SSA), free CaO (f-CaO), morphology, and mineralogical phases of the CFAs are more favorable than those of the MPs respectively, while the alkaline values, hydrophilic coefficients, particle size distributions (PSDs), and water contents of the two fillers are similar. It is suggested that CFAs may be more suitable than MPs for the use as asphalt concrete filler.

  19. Hanford Permanent Isolation Barrier Program: Asphalt technology data and status report - FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.; Zacher, A.H.

    1994-09-01

    The asphalt layer within the Hanford Permanent Isolation Barrier (HPIB) is an important component of the overall design. This layer provides a RCRA equivalent backup to the overlying earthen layers in the unlikely event that these layers are not able to reduce the infiltration rate to less than 0.05 cm/yr. There is only limited amount of information on using asphalt for a moisture infiltration barrier over the long times required by the HPIB. Therefore, a number of activities are under way, as part of the Barrier Development Program, to obtain data on the performance of asphalt as a moisture barrier in a buried environment over a 1000-year period. These activities include (1) determining RCRA equivalency, (2) measurement of physical properties, (3) measurement of aging characteristics, and (4) relationship to ancient asphalt analogs. During FY 1994 progress was made on all of these activities. Studies were conducted both in the laboratory and on the prototype barrier constructed over the 216-B-57 crib in the 200 East Area on the Hanford Site. This report presents results obtained from the asphalt technology tasks during FY 1994. Also included are updates to planned activities for asphalt analogs and monitoring the asphalt test pad near the prototype barrier. Measurements of hydraulic conductivity on the HMAC portion of the prototype barrier show that the asphalt layers easily meet the RCRA standard of 1 {times} 10{sup -7} cm/s. In-place measurements using a new field falling head technique show an average of 3.66 {times} 10{sup -8} cm/s, while cores taken from the north end of the prototype and measured in a laboratory setup averaged 1.29 {times} 10{sup -9} cm/s. Measurements made on the fluid applied asphalt membrane (polymer-modified asphalt) show an extremely low permeability of less than 1 {times} 10{sup -11} cm/s.

  20. Evaluation of an eastern shale oil residue as an asphalt additive

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, K.P.; Harnsberger, P.M.

    1995-09-01

    An evaluation of eastern shale oil (ESO) residue as an asphalt additive to reduce oxidative age hardening and moisture susceptibility was conducted by Western Research Institute (WRI). The ESO residue, have a viscosity of 23.9 Pa{lg_bullet}s at 60{degree}C (140{degree}F), was blended with three different petroleum-derived asphalts, ASD-1, AAK-1, and AAM-1, which are known to be very susceptible to oxidative aging. Rheological and infrared analyses of the unaged and aged asphalts and the blends were then conducted to evaluate oxidative age hardening. In addition, the petroleum-derived asphalts and the blends were coated onto three different aggregates, Lithonia granite (RA), a low-absorption limestone (RD), and a siliceous Gulf Coast gravel (RL), and compacted into briquettes. Successive freeze-thaw cycling was then conducted to evaluate the moisture susceptibility of the prepared briquettes. The rheological analyses of the unaged petroleum-derived asphalts and their respective blends indicate that the samples satisfy the rutting requirement. However, the aging indexes for the rolling thin film oven (RTFO)-aged and RTFO/pressure aging vessel (PAV)-aged samples indicate that the blends are stiffer than the petroleum-derived asphalts. This means that when in service the blends will be more prone to pavement embrittlement and fatigue cracking than the petroleum-derived asphalts. Infrared analyses were also conducted on the three petroleum-derived asphalts and the blends before and after RTFO/PAV aging. In general, upon RTFO/PAV aging, the amounts of carbonyls and sulfoxides in the samples increase, indicating that the addition of the ESO residue does not mitigate the chemical aging (oxidation) of the petroleum-derived asphalts. This information correlates with the rheological data and the aging indexes that were calculated for the petroleum-derived asphalts and the blends.

  1. Hanford Permanent Isolation Barrier Program: Asphalt technology data and status report - FY 1994

    International Nuclear Information System (INIS)

    The asphalt layer within the Hanford Permanent Isolation Barrier (HPIB) is an important component of the overall design. This layer provides a RCRA equivalent backup to the overlying earthen layers in the unlikely event that these layers are not able to reduce the infiltration rate to less than 0.05 cm/yr. There is only limited amount of information on using asphalt for a moisture infiltration barrier over the long times required by the HPIB. Therefore, a number of activities are under way, as part of the Barrier Development Program, to obtain data on the performance of asphalt as a moisture barrier in a buried environment over a 1000-year period. These activities include (1) determining RCRA equivalency, (2) measurement of physical properties, (3) measurement of aging characteristics, and (4) relationship to ancient asphalt analogs. During FY 1994 progress was made on all of these activities. Studies were conducted both in the laboratory and on the prototype barrier constructed over the 216-B-57 crib in the 200 East Area on the Hanford Site. This report presents results obtained from the asphalt technology tasks during FY 1994. Also included are updates to planned activities for asphalt analogs and monitoring the asphalt test pad near the prototype barrier. Measurements of hydraulic conductivity on the HMAC portion of the prototype barrier show that the asphalt layers easily meet the RCRA standard of 1 x 10-7 cm/s. In-place measurements using a new field falling head technique show an average of 3.66 x 10-8 cm/s, while cores taken from the north end of the prototype and measured in a laboratory setup averaged 1.29 x 10-9 cm/s. Measurements made on the fluid applied asphalt membrane (polymer-modified asphalt) show an extremely low permeability of less than 1 x 10-11 cm/s

  2. Experimental evaluation on high temperature rheological properties of various fiber modified asphalt binders

    Institute of Scientific and Technical Information of China (English)

    陈筝; 吴少鹏; 朱祖煌; 刘杰胜

    2008-01-01

    High temperature rheological properties of fiber modified asphalt binders and impact of the type and content on such properties were studied.Three types of fiber,including polyester(PET),polyacrylonitrile(PAN) and cellulose(CEL),a control content(0%) and four levels of fiber content(2%,4%,6% and 8% by total asphalt binder mass) were used with asphalt binders.The high temperature rheological properties,consisting of complex modulus(G*) and phase angle δ,were measured using SHRP’s dynamic shear rheometer(DSR) between 46-82 ℃.Experimental results indicate that the changes of G* and tan δ of fiber modified asphalt binders with the increase of test temperature tend to slow down,and the temperature susceptibility is improved obviously compared to that of original asphalt binder.Fiber modification results in the increase of rutting parameter(G*/sin δ) at high temperatures,the decrease of temperature susceptibility,and further improved high temperature performance of asphalt binder.An excellent correlation exhibits between fiber content and high temperature performance of asphalt binder.Moreover,fiber type also has different influences on the improvement of G*/sin δ,G*/sin δ of PET and PAN fiber asphalt binders are both higher than that of CEL fiber,but G*/sin δ of CEL fiber is still higher than that of original asphalt.However,there is a critical fiber content when fibers start to interact with each other.Therefore,based on the critical fiber content and economic consideration,the optimum fiber contents for various fiber-modified asphalt binders are obtained.

  3. Effect of Short-Term Aging Process on the Moisture Susceptibility of Asphalt Mixtures and Binders Containing Sasobit Warm Mix Additive

    OpenAIRE

    Bo Li; Jinyu Yang; Xiaohui Li; Xiang Liu; Feng Han; Liangying Li

    2015-01-01

    Moisture susceptibility is one of the key issues of warm mix asphalt (WMA). In this research, the moisture susceptibility of asphalt mixtures and binders containing Sasobit warm mix additive was investigated in comparison to that of hot mixture asphalt (HMA) through laboratory aging experiments. The WMA asphalt mixtures were aged in the laboratory at three aging temperatures and times. The moisture susceptibility of the asphalt mixtures was measured through the laboratory immersed Marshall te...

  4. Assessment of porous asphalt pavement performance: hydraulics and water quality

    Science.gov (United States)

    Briggs, J. F.; Ballestero, T. P.; Roseen, R. M.; Houle, J. J.

    2005-05-01

    The objective of this study is to focus on the water quality treatment and hydraulic performance of a porous asphalt pavement parking lot in Durham, New Hampshire. The site was constructed in October 2004 to assess the suitability of porous asphalt pavement for stormwater management in cold climates. The facility consists of a 4-inch asphalt open-graded friction course layer overlying a high porosity sand and gravel base. This base serves as a storage reservoir in-between storms that can slowly infiltrate groundwater. Details on the design, construction, and cost of the facility will be presented. The porous asphalt pavements is qualitatively monitored for signs of distress, especially those due to cold climate stresses like plowing, sanding, salting, and freeze-thaw cycles. Life cycle predictions are discussed. Surface infiltration rates are measured with a constant head device built specifically to test high infiltration capacity pavements. The test measures infiltration rates in a single 4-inch diameter column temporarily sealed to the pavement at its base. A surface inundation test, as described by Bean, is also conducted as a basis for comparison of results (Bean, 2004). These tests assess infiltration rates soon after installation, throughout the winter, during snowmelt, after a winter of salting, sanding, and plowing, and after vacuuming in the spring. Frost penetration into the subsurface reservoir is monitored with a frost gauge. Hydrologic effects of the system are evaluated. Water levels are monitored in the facility and in surrounding wells with continuously logging pressure transducers. The 6-inch underdrain pipe that conveys excess water in the subsurface reservoir to a riprap pad is also continuously monitored for flow. Since porous asphalt pavement systems infiltrate surface water into the subsurface, it is important to assess whether water quality treatment performance in the subsurface reservoir is adequate. The assumed influent water quality is

  5. Test of Microstructur Permeable Asphalt Pavement Used Domato Stone (Quarsite Dolomite As Course Agregate for Surface Layer of Road Pavement

    Directory of Open Access Journals (Sweden)

    Firdaus Chairuddin

    2014-06-01

    Full Text Available The experiment works was dividing into two phases, for phase one was developed to investigate the properties of aggregates and straight asphalt qualities. The experiment work for phase two was developed to design the porous asphalt mix. In this phase Japan’s method and Binamarga’s method was used to define optimum asphalt content. In this phase, has result cantabro loss weight 77.10 for asphalt quality 3% and loss weight 9.70 for asphalt quality 5%. asphalt flow down, air void and density values. The experiment work for phase two was developed to investigate the qualities of porous asphalt. In this phase, wheel tracking machine test was used to investigate the dynamic stability of mixes.

  6. Effect of crumb rubber on asphaltic binder chemistry and rheology

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Cicero de S.; Tome, Luisa G.A.; Sant' ana, Hosiberto B.; Soares, Jorge B.; Soares, Sandra A. [University Federal of Ceara, Fortaleza, CE (Brazil)

    2008-07-01

    The use of the crumb rubber (CR) from scraps tires to modify asphalt binders (AB) at high temperature can improve significantly the performance grade, but the storage stability can be influenced after the mix of AB and CR or polymer. The major concern of asphalt binder with polymer and CR blends is their lack of stability during prolonged storage at high temperatures. The tendency to phase separation under quiescent conditions appears as an important limitation for the practical use of these blends. After the RTFOT and PAV process, the binder conventional and modified was analyzed in a Fourier Transform Infrared spectrometer (FTIR) for chemical characterization. After aging in RTFOT, the AB presented a larger degradation compared to the CR of RABC and RABC commercial. So, the crumb rubber contributed to the binder stability, acting as an antioxidant in the aging process. The dynamic mechanical properties of CR modify asphalts binder before and after graft has been characterized by use of dynamic shear rheometer (DSR) or advances rheology expanded system (ARES) of Rheometric Scientific. The difference in the viscoelastic parameters between the top and the bottom sections of the tube was measured. It has been found that the added content of CR has great effect on the rheological properties of the AB and its high temperature performance. It also has been confirmed that the RABC sample showed larger storage stability compared to the sample RABC commercial observed with viscoelastic parameters. As a consequence, the use CR and aromatic oil can be considered a suitable alternative for modification of binder in pavement. (author)

  7. Microstructural characterization of the chemomechanical behavior of asphalt in terms of aging and fatigue performance properties

    Science.gov (United States)

    Allen, Robert Grover

    The study of asphalt chemo-mechanics requires a basic understanding of the physical properties and chemical composition of asphalt and how these properties are linked to changes in performance induced by chemical modifications. This work uniquely implements the framework of chemo-mechanics by investigating two types of chemical modification processes, natural (oxidative aging) and synthetic (chemical doping) as they relate not only to macro-scale properties of asphalt binder but also to the asphalt microstructure and nanorheology. Furthermore, this study demonstrates the application of atomic force microscopy (AFM) imaging and the extraction of nano-scale engineering properties, i.e. elastic modulus, relaxation modulus, and surface energy, as a method to predict performance related to the fatigue characteristics of asphalt binders by modeling intrinsic material flaws present amongst phase interfaces. It was revealed that oxidative aging induces substantial microstructural changes in asphalt, including variations in phase structure, phase properties, and phase distribution. It has also been shown that certain asphalt chemical parameters have a consistent and measureable effect on the asphalt microstructure that is observed with AFM. In fact, particular phases that emerged via chemical doping revealed a surprising correlation between oxidative aging and the saturates chemical parameter of asphalt in terms of how they explicitly impact durability and performance of asphalt. By implementing a crack initiation model---which requires measureable microstructural characteristics as an input parameter---it was found that microstructural flaws (depending on the extremity) can have a more profound impact on asphalt performance than the properties of the material located between the flaws. It was also discovered by comparing the findings to performance data in the Strategic Highway Research Program's (SHRP's) Materials Reference Library (MRL), that the crack initiation model

  8. Viscoelastic Property Evaluation of Asphalt Cement by Ultrasonic Measurement

    International Nuclear Information System (INIS)

    This study investigates the method to measure the viscoelastic properties of asphalt cement, one of the viscoelastic materials, using the ultrasound. The wave speed and attenuation were measured from -20 .deg. C to 60 .deg. C at the frequency of 2.25MHz. Then, the storage and loss longitudinal moduli, loss tangent storage and loss longitudinal compliances were found depending on the temperatures based on the linear viscoelastic theory. Stress relaxation, creep, and viscosity were predicted using Maxwell and Voigt-Kelvin viscoelastic models. The validity of superposition principle and shift factor were verified by comparing the present results to the data reported in the literatures

  9. Analysis of moisture susceptibility of different loose coated asphalt mixtures

    International Nuclear Information System (INIS)

    The durability is one of the significant properties of bituminous paving mixtures. It is shown that moisture damage is one of the primary factors affecting the durability of the mixtures. Moisture damage is basically a combined result of two mechanisms: a) Loss of adhesion between the bitumen and aggregate interface and b) Loss of cohesion in the mixture along with several other factors like the changes in binders, aggregates qualities and something else. The aim of this study is therefore to examine the moisture sensitivity, of different combinations of five different kinds of aggregate quarries/sources and six binder types of different penetration grade and properties, and compare the performance of these combinations between four laboratory tests: Static Immersion Test, Total Water Immersion Test (TWIT) Test, Boiling TWIT Test and Rolling Bottle Test. The tests have been carried out at the Taxila Institute of Transportation Engineering (TITE) to obtain the data for loose coated bituminous paving mixtures. The results show that the combination of Margallah aggregate source and ELVALOY Polymer Modified Bitumen provides best resistance against moisture damage and Rolling Bottle Test is the best test to discriminate between different loose coated Asphalt mixtures, irrespective of time taken by the test. major factors that caused moisture-related problems: adhesive failure, bitumen stripping off the aggregate surface and cohesive failure which is due to the loss of mixture stiffness. Moisture-related problems do not occur without the presence of water and traffic, which provides energy to break the adhesive bonds and cause cohesive failures. Repeated freeze-thaw cycles can also accelerate the distress in the pavement. Since the performance of Asphalt mixtures under the affect of moisture is a very complex issue, various researches have been made to simulate the moisture damage in the past years. Asphalt technologists have carried out many attempts to develop

  10. Construction of an experimental sulfur-extended-asphalt pavement

    Science.gov (United States)

    Dodge, K. S.

    1982-07-01

    The design, placement and collection of initial data from a sulfur extended asphalt (SEA) pavement and a conventional pavement used as a control is documented. The SEA pavement used 30 percent sulfur by total weight of the binder. Mix temperatures, hot bin gradations, and toxic emissions were monitored at the plant and the site throughout placement. Aggregates were collected from the hot bin during production of the control and SEA mixes for use in a Marshall mix design. Cores were extracted from both SEA and control pavements 1 month after placement for laboratory testing. Pavement surface properties were also examined after 1 month of service.

  11. New approach for calculating permanent deformation in asphalt pavement

    Institute of Scientific and Technical Information of China (English)

    TAN Yi-qiu; CHEN Feng-chen; LIU Hao; SU Xin; DONG Ze-jiao; DONG Yu-ming

    2010-01-01

    A new approach using the Fiber Bragg Grating(FBG)sensor and viscoelastic model to monitor and analyze the internal strain and temperature of asphalt pavement is proposed.Some parameters including peak strain,temperature and loading time were calculated with the application of multi-dimensional sensors group.These parameters were incorporated with viscoelastic model of five units to evaluate the permanent deformation of pavement.An application example was conducted,and the results show that it is feasible to analyze and calculate the permanent deformation of pavement structures with FBG sensors.

  12. Research on nonlinear constitutive relationship of permanent deformation in asphalt pavements

    Institute of Scientific and Technical Information of China (English)

    PENG; Miaojuan; XU; Zhihong

    2006-01-01

    To predict correctly the rut depths in asphalt pavements,a new nonlinear viscoelastic-elastoplastic constitutive model of permanent deformation in asphalt pavements is presented.The model combines a generalized Maxwell model with an elastoplastic one.Then from the creep theory,the linear and nonlinear constitutive equations of the generalized Maxwell model are obtained.From the nonlinear finite element method for the rutting of the asphalt pavement,the rut depths of 4 asphalt-aggregate mixtures are obtained.And the results are compared with the ones from the finite element method by SHRP and the experiments by SWK/UN.The results in this paper are better than the ones by SHRP,and agree with the ones of the experiment by SWK/UN.This shows that the nonlinear viscoelastic-elastoplastic constitutive model,which is presented in this paper for the rutting of the asphalt pavement,is effective.The properties,such as nonlinear elasticity,plasticity,viscoelasticity and nonlinear viscoelasticity,which affect the rutting of an asphalt pavement,can be shown in the model.And the characteristics of the permanent deformation of the asphalt pavement can be presented entirely in the model.

  13. Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China.

    Science.gov (United States)

    Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

    2016-03-22

    In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase.

  14. Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China.

    Science.gov (United States)

    Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

    2016-03-01

    In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase. PMID:27011196

  15. Development of high stability hot mix asphalt concrete with hybrid binder

    Directory of Open Access Journals (Sweden)

    Toshiaki Hirato

    2014-12-01

    Full Text Available Cost reduction of public works projects has been desired due to severe financial circumstances. Therefore, asphalt pavement has been requested to extend its life. Semi-flexible pavement or epoxy asphalt pavement, which has high rutting resistance and oil resistance, may be applied to the place where these performances ae demanded. However, special technique is required in manufacturing and construction. In addition, these materials have also raised a problem that they cannot be recycled. Meanwhile, conventional asphalt pavement has several drawbacks. It is vulnerable to rutting caused by traffic load and damage caused by petroleum oils such as gasoline or motor oil. The materials used in asphalt mixtures were studied for improving the durability of asphalt mixture. A high stability asphalt concrete was developed which has equal or superior performance to semi-flexible pavement and epoxy asphalt pavement. In this paper, the process of selecting the substance and the characteristics evaluation of the developed mixtures ae described. Furthermore, an inspection result as well as follow-up survey of the performance of the developed mixtures obtained from trial and actual construction is shown.

  16. Rutting and Fatigue Cracking Resistance of Waste Cooking Oil Modified Trinidad Asphaltic Materials

    Directory of Open Access Journals (Sweden)

    Rean Maharaj

    2015-01-01

    Full Text Available The influence of waste cooking oil (WCO on the performance characteristics of asphaltic materials indigenous to Trinidad, namely, Trinidad Lake Asphalt (TLA, Trinidad Petroleum Bitumen (TPB, and TLA : TPB (50 : 50 blend, was investigated to deduce the applicability of the WCO as a performance enhancer for the base asphalt. The rheological properties of complex modulus (G∗ and phase angle (δ were measured for modified base asphalt blends containing up to 10% WCO. The results of rheology studies demonstrated that the incremental addition of WCO to the three parent binders resulted in incremental decreases in the rutting resistance (decrease in G∗/sinδ values and increases in the fatigue cracking resistance (decrease in G∗sinδ value. The fatigue cracking resistance and rutting resistance for the TLA : TPB (50 : 50 blends were between those of the blends containing pure TLA and TPB. As operating temperature increased, an increase in the resistance to fatigue cracking and a decrease in the rutting resistance were observed for all of the WCO modified asphaltic blends. This study demonstrated the capability to create customized asphalt-WCO blends to suit special applications and highlights the potential for WCO to be used as an environmentally attractive option for improving the use of Trinidad asphaltic materials.

  17. Use of Hydrogen from Renewable Energy Source for Powering Hot-Mix Asphalt Plant

    Directory of Open Access Journals (Sweden)

    Kasthurirangan Gopalakrishnan

    2012-03-01

    Full Text Available A significant portion of paved roads and highways are surfaced with Hot-Mix Asphalt. Environmental Life-Cycle Assessment studies have shown that, in the production of Hot-Mix Asphalt pavements, major consumption of energy takes place during asphalt mixing and drying of aggregates, more than what is consumed during the extraction of crude oil and the distillation of bitumen. Currently, natural gas is the primarily source of fossil fuel used to produce 70 to 90 percent of the Hot-Mix Asphalt in the USA, while the remainder of the Hot-Mix Asphalt is produced using oil, propane, waste oil, or other fuels. Energy-related CO2 emissions resulting from the use of fossil fuels in various industry and transportation sectors represent a significant portion of human-made greenhouse gas emissions. This study investigates the technical feasibility of using a hybrid wind energy system as a clean source of energy for operating an entire Hot-Mix Asphalt production facility. Since wind blows intermittently, the extracted wind energy will be stored in the form of hydrogen which is considered a lightweight, compact energy carrier, for later use, thus creating a ready source of electricity for the Hot-Mix Asphalt plant when wind is not present or when electricity demand is high.

  18. Environmental impacts of asphalt mixes with electric arc furnace steel slag.

    Science.gov (United States)

    Milačič, Radmila; Zuliani, Tea; Oblak, Tina; Mladenovič, Ana; Ančar, Janez Šč

    2011-01-01

    Electric arc furnace (EAF) steel slag can be used as an alternative high-quality material in road construction. Although asphalts with slag aggregates have been recognized as environmentally acceptable, there is a lack of data concerning the potential leaching of toxic Cr(VI) due to the highly alkaline media of EAF slag. Leaching of selected water extractable metals from slag indicated elevated concentrations of total chromium and Cr(VI). To estimate the environmental impacts of asphalt mixes with slag, leachability tests based on diffusion were performed using pure water and salt water as leaching agents. Compact and ground asphalt composites with natural aggregates, and asphalt composites in which the natural aggregates were completely replaced by slag were prepared. The concentrations of total chromium and Cr(VI) were determined in leachates over a time period of 6 mo. After 1 and 6 mo, the concentrations of some other metals were also determined in the leachates. The results indicated that chromium in leachates from asphalt composites with the addition of slag was present almost solely in its hexavalent form. However, the concentrations were very low (below 25 μg L) and did not represent an environmental burden. The leaching of other metals from asphalt composites with the addition of slag was negligible. Therefore, the investigated EAF slag can be considered as environmentally safe substitute for natural aggregates in asphalt mixes.

  19. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review

    Directory of Open Access Journals (Sweden)

    Haiping Zhou

    2014-02-01

    Full Text Available The California Department of Transportation (Caltrans has been using scrap tire rubber in asphalt pavements since the 1970s in chip seals and the 1980s in rubberized hot mix asphalt(RHMA. Both the wet (field blend and dry processes were used in early trials. Caltrans has also used rubber modified binders containing both crumb rubber modifier and polymer modifier that could be manufactured at a refinery facility, a terminal blend wet process. Since the beginning of this century, Caltrans increased the use of scrap tire rubber in paving projects and invested considerable resources in developing technically sound, cost effective, and environmentally friendly strategies for using scrap tire rubber in roadway applications. By the end of year 2010, approximately 31%of all hot mix asphalt (HMA placed by Caltrans was rubberized HMA, roughly 1.2 million tons. Caltrans efforts in using asphalt rubber products were also demonstrated in its research and technology development. These included the construction of two full-scale field experiments, five warranty projects, and an accelerated pavement study using a heavy vehicle simulator. Additionally, terminal blend asphalt rubber and rubberized warm mix asphalts began to be experimented on trial basis. This paper provides a comprehensive review of Caltrans experience over four decades with asphalt rubber products. Current practices and future outlook are also discussed.

  20. The Potential of Heat Collection from Solar Radiation in Asphalt Solar Collectors in Malaysia

    Science.gov (United States)

    Beddu, Salmia; Talib, Siti Hidayah Abdul; Itam, Zarina

    2016-03-01

    The implementation of asphalt solar collectors as a means of an energy source is being widely studied in recent years. Asphalt pavements are exposed to daily solar radiation, and are capable of reaching up to 70°C in temperature. The potential of harvesting energy from solar pavements as an alternative energy source in replace of non-renewable energy sources prone to depletion such as fuel is promising. In Malaysia, the sun intensity is quite high and for this reason, absorbing the heat from sun radiation, and then utilizing it in many other applications such as generating electricity could definitely be impressive. Previous researches on the different methods of studying the effect of heat absorption caused by solar radiation prove to be quite old and inaffective. More recent findings, on the otherhand, prove to be more informative. This paper focuses on determining the potential of heat collection from solar radiation in asphalt solar collectors using steel piping. The asphalt solar collector model constructed for this research was prepared in the civil engineering laboratory. The hot mixed asphalt (HMA) contains 10% bitumen mixed with 90% aggregates of the total size of asphalt. Three stainless steel pipes were embedded into the interior region of the model according to the design criteria, and then put to test. Results show that harvesting energy from asphalt solar collectors proves highly potential in Malaysia due its the hot climate.

  1. Glass Transition and Molecular Mobility in Styrene-Butadiene Rubber Modified Asphalt.

    Science.gov (United States)

    Khabaz, Fardin; Khare, Rajesh

    2015-11-01

    Asphalt, a soft matter consisting of more than a thousand chemical species, is of vital importance for the transportation infrastructure, yet it poses significant challenges for microscopic theory and modeling approaches due to its multicomponent nature. Polymeric additives can potentially enhance the thermo-mechanical properties of asphalt, thus helping reduce the road repair costs; rational design of such systems requires knowledge of the molecular structure and dynamics of these systems. We have used molecular dynamics (MD) simulations to investigate the volumetric, structural, and dynamic properties of the neat asphalt as well as styrene-butadiene rubber (SBR) modified asphalt systems. The volume-temperature behavior of the asphalt systems exhibited a glass transition phenomenon, akin to that observed in experiments. The glass transition temperature, room temperature density, and coefficient of volume thermal expansion of the neat asphalt systems so evaluated were in agreement with experimental data when the effect of the high cooling rate used in simulations was accounted for. While the volumetric properties of SBR modified asphalt were found to be insensitive to the presence of the SBR additive, the addition of SBR led to an increase in the aggregation of asphaltene molecules. Furthermore, addition of SBR caused a reduction in the mobility of the constituent molecules of asphalt, with the reduction being more significant for the larger constituent molecules. Similar to other glass forming liquids, the reciprocal of the diffusion coefficient of the selected molecules was observed to follow the Vogel-Fulcher-Tammann (VFT) behavior as a function of temperature. These results suggest the potential for using polymeric additives for enhancing the dynamic mechanical properties of asphalt without affecting its volumetric properties. PMID:26451630

  2. How to transform an asphalt concrete pavement into a solar turbine

    International Nuclear Information System (INIS)

    Highlights: • We create a system for harvesting energy from asphalt concrete. • We create an artificial porosity in the asphalt concrete. • We connect a chimney to this porosity. • Differences in temperature produce an air flow. • This air flow serves also for cooling down the pavement. - Abstract: Asphalt concrete can absorb a considerable amount of the incident solar radiation. For this reason asphalt roads could be used as solar collectors. There have been different attempts to achieve this goal. All of them have been done by integrating pipes conducting liquid, through the structure of the asphalt concrete. The problem of this system is that all pipes need to be interconnected: if one is broken, the liquid will come out and damage the asphalt concrete. To overcome these limitations, in this article, an alternative concept is proposed:parallel air conduits, where air can circulate will be integrated in the pavement structure. The idea is to connect these artificial pore volumes in the pavement to an updraft or to a downdraft chimney. Differences of temperature between the pavement and the environment can be used to create an air flow, which would allow wind turbines to produce an amount of energy and that would cool the pavement down in summer or even warm it up in winter. To demonstrate that this is possible, an asphalt concrete prototype has been created and basics calculations on the parameters affecting the system have been done. It has been found that different temperatures, volumes of air inside the asphalt and the difference of temperature between the asphalt concrete and the environment are critical to maximize the air flow through the pavement. Moreover, it has been found that this system can be also used to reduce the heat island effect

  3. A review of changes in composition of hot mix asphalt in the United States.

    Science.gov (United States)

    Mundt, Diane J; Marano, Kristin M; Nunes, Anthony P; Adams, Robert C

    2009-11-01

    This review researched the materials, methods, and practices in the hot mix asphalt industry that might impact future exposure assessments and epidemiologic research on road paving workers. Since World War II, the U.S. interstate highway system, increased traffic volume, transportation speeds, and vehicle axle loads have necessitated an increase in demand for hot mix asphalt for road construction and maintenance, while requiring a consistent road paving product that meets state-specific physical performance specifications. We reviewed typical practices in hot mix asphalt paving in the United States to understand the extent to which materials are and have been added to hot mix asphalt to meet specifications and how changes in practices and technology could affect evaluation of worker exposures for future research. Historical documents were reviewed, and industry experts from 16 states were interviewed to obtain relevant information on industry practices. Participants from all states reported additive use, with most being less than 2% by weight. Crumb rubber and recycled asphalt pavement were added in concentrations approximately 10% per unit weight of the mix. The most frequently added materials included polymers and anti-stripping agents. Crumb rubber, sulfur, asbestos, roofing shingles, slag, or fly ash have been used in limited amounts for short periods of time or in limited geographic areas. No state reported using coal tar as an additive to hot mix asphalt or as a binder alternative in hot mix pavements for high-volume road construction. Coal tar may be present in recycled asphalt pavement from historical use, which would need to be considered in future exposure assessments of pavers. Changes in hot mix asphalt production and laydown emission control equipment have been universally implemented over time as the technology has become available to reduce potential worker exposures. This work is a companion review to a study undertaken in the petroleum refining

  4. Distribution characteristics and petroleum geological significance of the Silurian asphaltic sandstones in Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Jun; PANG; Xiongqi; LIU; Luofu; JIANG; Zhenxue; LIU

    2004-01-01

    The Tarim Basin is a typical superimposed basin in which there have occurred multiphase adjustment and destruction of the reservoirs. The widely distributed asphaltic sandstones of the Silurian are the very product after destruction of the reservoirs. Studies show that the Silurian asphaltic sandstones distributed in both the middle and western parts on the basin are controlled chiefly by the Caledonian oil source area and by the Tazhong, Tabei and Bachu uplifts, whereas the distribution of the asphaltic sandstones on local structural belts is controlled by the reservoir's sedimentary system. Vertically, most of the asphaltic sandstones are under the regional caprock of red mudstones and the upper sandstone section of compact lithology. Due to the difference of hydrocarbon destruction in the early stage and the influence of hydrocarbon recharge in the late stage, the asphaltic sandstones and oil-bearing sandstones in the Tazhong area can be vertically divided into the upper and lower sections and they have an interactive distribution relationship as well. Asphaltic sandstones exist not only in intergranular pores but also inside the grains of sand and between the crevices, proving the destruction of early reservoirs due to uplifting. The existence of asphaltic sandstones over a large area reveals that the large-scale migration and accumulation and the subsequent destruction of hydrocarbons in the Craton area. The destruction caused a loss of the reserve resources of the Palaeozoic amounting to nearly 13.3 billion tons. Asphaltic sandstones formed after the destruction of oil and gas may serve as an effective caprock which is beneficial to accumulation of hydrocarbons and formation of the pool sealed by asphaltic sandstones in the later stage. The destruction of the early Silurian hydrocarbons depends on the stratigraphic burial depth. The deep part under the northern slope of Tazhong is an area favorable to search of undestroyed Silurian oil reservoirs.

  5. Survival Analysis of Fatigue and Rutting Failures in Asphalt Pavements

    Directory of Open Access Journals (Sweden)

    Pabitra Rajbongshi

    2016-01-01

    Full Text Available Fatigue and rutting are two primary failure mechanisms in asphalt pavements. The evaluations of fatigue and rutting performances are significantly uncertain due to large uncertainties involved with the traffic and pavement life parameters. Therefore, deterministically it is inadequate to predict when an in-service pavement would fail. Thus, the deterministic failure time which is known as design life (yr of pavement becomes random in nature. Reliability analysis of such time (t dependent random variable is the survival analysis of the structure. This paper presents the survival analysis of fatigue and rutting failures in asphalt pavement structures. It is observed that the survival of pavements with time can be obtained using the bathtub concept that contains a constant failure rate period and an increasing failure rate period. The survival function (S(t, probability density function (pdf, and probability distribution function (PDF of failure time parameter are derived using bathtub analysis. It is seen that the distribution of failure time follows three parametric Weibull distributions. This paper also works out to find the most reliable life (YrR of pavement sections corresponding to any reliability level of survivability.

  6. Waste plastic as a stabilizing additive in Stone Mastic Asphalt

    Directory of Open Access Journals (Sweden)

    Dr. K.S.Beena

    2010-12-01

    Full Text Available The present study investigates the benefits of stabilizing the stone mastic asphalt (SMA mixture in flexible pavement with shredded waste plastic. Conventional (without plastic and the stabilized SMA mixtures were subjected to performance tests including Marshall Stability, tensile strength and compressive strength tests. Triaxial tests were also conducted with varying percentage bitumen by weight of mineral aggregate (6% to 8% and by varying percentage plasticby weight of mix (6% to 12% with an increment of 1%. Plastic content of 10% by weight of bitumen is recommended for the improvement of the performance of Stone Mastic Asphalt mixtures. 10% plastic contentgives an increase in the stability, split tensile strength and compressive strength of about 64%, 18% and 75% respectively compared to the conventional SMA mix. Triaxial test results show a 44% increase in cohesion and 3% decrease in angle of shearing resistanceshowing an increase in the shear strength. The drain down value decreases with an increase in plastic content and the value is only 0.09 % at 10% plastic content and proves to be an effective stabilizing additive in SMA mixtures.

  7. Asphalt-emulsion sealing of uranium-mill tailings

    International Nuclear Information System (INIS)

    The use of asphalt emulsion to contain radon and radium in uranium tailings is being investigated at the Pacific Northwest Laboratory. Results of these studies indicate that a radon flux reduction of greater than 99% can be obtained using either a poured-on/sprayed-on seal (3.0 to 7.0 mm thick) or an admix seal (2.5 to 12.7 cm thick) containing about 18 wt % residual asphalt. A field test was carried out at the Grand Junction tailings pile in order to demonstrate the sealing process. A reduction in radon flux ranging from 4.5 to greater than 99% (76% average) was achieved using a 12.7-cm (5-in.) admix seal with a sprayed-on top coat. A hydrostatic stabilizer used to apply the admix was followed by compaction, which formed the radon seal. Overburden was applied to provide a protective soil layer over the seal. Included in part of the overburden was a herbicide to prevent root penetration

  8. Rheological evaluation of polymer-modified asphalt binders

    Directory of Open Access Journals (Sweden)

    Mônica Romero Santos Fernandes

    2008-09-01

    Full Text Available Currently, the most used polymer for asphalt binder modification is the thermoplastic elastomer styrene butadiene styrene (SBS and aromatic oil is commonly added to the mixtures to improve their compatibly. This paper proposes the use of oil shale from sedimentary rock as a compatibilizer agent for polymer-modified asphalt binder (PMB. PMBs were produced by mixing a bitumen with a linear SBS copolymer (3.5% (w.w-1 using two oil shale contents (2 and 4% and petroleum aromatic oil to evaluate comparatively the effect of the compatibilizer agent on the SBS PMB properties. The rheological characteristics of the SBS PMBs were analyzed in a dynamic shear rheometer (DSR and the morphology accessed by fluorescence optical microscopy. The viscoelastic behavior of the samples corroborated the results for the classical properties and varied according to the sample morphology and composition. The results indicate that the aromatic and shale oils have similar effects on the microstructure, storage stability and viscoelastic behavior of the PMBs. Thus, shale oil could be successfully used as a compatibilizer agent without loss of properties or could even replace the aromatic oil. Following the Superpave methodology it was observed that the linear- and radial-SBS PMBs and linear-SBS PMB with 2% of shale oil can be used up to 70 °C, and the linear-SBS PMBs with 4% of shale oil or 2% of aromatic oil can be used only up to 64 °C.

  9. Numerical Analysis of Asphalt Pavements under Moving Wheel Loads

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The responses of the pavement in service are the basis for the design of the semi-rigid base course asphalt pavement.Due to the dynamic characteristics of wheel loads and the temperature loads,the dynamic response analysis is very significant.In this article, the dynamic analysis of asphalt pavement under moving wheel loads is carried out using finite element method coupled with non-reflective boundary method.The influences of the base modulus, thickness, the vehicle velocity, the tire pressure, and the contact condition at the interface are studied using parametric analysis.The results of numerical analysis show that it is not appropriate to simply increase the base modulus or thickness in the design.It would be beneficial if the base design is optimized synthetically.The increase of damping is also beneficial to the pavements because of the surface deflection and the stresses declination.Furthermore, the good contact condition at the interface results in good performance because it combines every layer of the pavement to work together.As overload aggravates the working condition of the pavement, it is not allowed.

  10. Development of an asphalt aging procedure to assess long-term binder performance

    KAUST Repository

    Juristyarini, Pramitha

    2011-09-07

    Nine asphalts, including seven Strategic Highway Research Program asphalts and two Texas asphalts, were aged at several conditions of temperature and oxygen pressure to develop an aging test. Values for a dynamic shear rheometer function, a combination of both elastic and viscous properties that serves as an indicator of susceptibility to age-related pavement cracking, were measured for both aged and unaged samples. Each aging condition was ranked and calibrated against environmental room aging (60°C, 1 atm air), used to simulate road aging. PAV thin-film aging at 90°C, 20 atm air for 32 hr best represented environmental room aging. © Taylor & Francis Group, LLC.

  11. Sulfur extended asphalt pavement evaluation in the State of Washington: SR 270 highway pavement performance report

    Science.gov (United States)

    Mahoney, J. P.; Terrel, R. L.; Cook, J. C.

    1982-11-01

    The placement and performance of sulfur extended asphalt (SEA) paving mixtures at a highway test site (SR 270) near Pullman, Washington is summarized. The mixture and structural designs and construction details are included. This is followed by a discussion of the data collection and analysis accomplished over a three year evaluation period (1979-1982). A major experimental feature of the study was the use of 0.100 (conventional asphalt concrete), 30/70 and 40/60 SEA binder ratios (sulfur/asphalt ratios are expressed as weight percents in the experimental paving mixtures.

  12. Mechanical analysis of asphalt mixtures produced with waste plastic modified binders

    OpenAIRE

    Costa, Liliana M. B.; Fernandes, Sara R. M.; Silva, Hugo Manuel Ribeiro Dias da; Oliveira, Joel; Miranda, Ricardo Filipe Martins

    2015-01-01

    This work compares the viscoelastic properties of an asphalt binder (70/100 pen) modified with different waste plastics and the mechanical properties of the resultant asphalt mixtures. Two different plastic wastes were used, namely recycled HDPE and EVA. Three different polymer modified binders were produced with these plastic wastes: i) 5% HDPE modified binder (P5); ii) 5% EVA modified binder (E5) and; iii) a modified binder with 4% of EVA and 2% HDPE (E4P2). Asphalt mixtures were produced w...

  13. Can oil, plastic and RAP wastes have a new life in novel asphalt mixtures?

    OpenAIRE

    Fernandes, Sérgio; Costa, L; Silva, Hugo Manuel Ribeiro Dias da; Oliveira, Joel; Machado, A.V.; F Duarte

    2015-01-01

    The pavement recycling allows to reuse reclaimed asphalt pavement (RAP) or other waste materials in new asphalt mixtures for road construction or rehabilitation, thus re-ducing the use of virgin materials (aggregates and bitumen). Thus, the main aim of this study is to minimize the use of natural resources through the reuse of three waste materials: HDPE, mo-tor oil and RAP. Different amounts of waste motor oil and HDPE were added to an asphalt binder with 50% aged bitumen. The best solutions...

  14. Epoxy asphalt concrete paving on the deck of long-span steel bridges

    Institute of Scientific and Technical Information of China (English)

    HUANG Wei; QIAN Zhendong; CHEN Gang; YANG Jun

    2003-01-01

    It is the first systematic research in the world on the composition design of epoxy asphalt concrete as pav- ing material. Material characteristics and service perform- ance of mixture, fatigue resistance characteristics of epoxy asphalt concrete by the fatigue test of complex beam have also been described. This research indicates that epoxy asphalt concrete is a good type of paving material. Research results have been applied successfully in the paving of steel deck of the Second Nanjing Yangtze River Bridge (SNYRB). It provides a new paving type for long-span steel bridges of China and has a bright application prospect.

  15. HOW TO OBTAIN ECONOMICALLY EFFICIENT ASPHALT CONCRETE MIXTURES FOR CONSTRUCTIVE AUTOMOBILE ROAD AND STREET PAVEMENTS

    Directory of Open Access Journals (Sweden)

    V. A. Verenko

    2009-01-01

    Full Text Available The paper describes a methodology for evaluation of technical and economic efficiency of asphalt concrete mixture components. The method allows to perform a directed search for new materials which are used for mixture preparation and it also provides an efficient use of monetary funds. Firstly, it is possible to obtain this result due to optimum price-quality ratio of asphalt mixture which is determined by its service life in a pavement; secondly, it is possible to obtain this result due to  exclusion of errors while selecting components of the asphalt mixture out of the whole range applied presently in the world practice.

  16. Experimental studies for the estimation of soluble organic components leached from asphalt (6). Research of soluble organic components in the leaching test of asphalt under reducing condition

    International Nuclear Information System (INIS)

    Organic TRU waste from (organic matrix and/or organic matter in waste) seems to be decomposed in the repository in long term by the reaction with water, radiation and by effect of microorganisms. Groundwater intruded into the repository dissolves soluble organic components as degradation products from the waste form. It is possible that complexation of transuranic elements with soluble organic component makes solubility higher and makes sorption coefficient of clays and rocks lower. These phenomena may affect the performance assessment of the TRU waste repository. This paper reports the chemical degradation of asphalt as a material of organic TRU waste from by contacting water under reducing condition. The chemical degradation tests by contacting water in reducing condition were conducted in (1) asphalt +water +iron powder system (AH) (2) asphalt + calcium hydroxide +sodium nitrate +water +iron powder system (ACNH) (3) asphalt + sodium hydroxide + water +iron powder system (AOH). The test result of TOC of leachant shows TOC does not increase by time in AH and ACNH case, but TOC of leachant increases in AOH case. In previous research, TOC in high alkaline (10M-NaOH) system in aerobic condition showed high value. Chemical degradation mechanism of asphalt seems to be mainly oxidative decomposition, but even under reducing condition it is possible that soluble organic components are formed by alkaline hydrolysis. (author)

  17. Rheological Properties of Asphalt Modified by Supramolecular UV Resistant Material-LDHs

    Institute of Scientific and Technical Information of China (English)

    WANG Jinshan; WU Shaopeng; HAN Jun; LIU Xing

    2012-01-01

    Dynamic rheological properties of asphalt modified by Supramolecular UV resistant material-layered double hydroxides(LDHs) was studied by means of the dynamic shear rheometer (DSR) test.Two typical base asphalts were chosen and modified by 2 different LDHs contents.DSR tests were performed on the original samples,samples after exposed to outdoor and samples after the artificial accelerated UV aging tests respectively to analyze the rheological properties.It is found that when the LDHs content is between 3wt% and 5wt% of asphalt weight,the high temperature performance and fatigue resistant property of the modified asphalt become better,the UV aging resistance properties are improved.

  18. Development of superior asphalt recycling agency: Phase 1, Technical feasibility. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bullin, J.A.; Glover, C.J.; Davison, R.R.; Lin, Moon-Sun; Chaffin, J.; Liu, Meng; Eckhardt, C.

    1996-04-01

    About every 12 years, asphalt roads must be reworked, and this is usually done by placing thick layers (hot-mix overlays) of new material on top of failed material, resulting in considerable waste of material and use of new asphalt binder. A good recycling agent is needed, not only to reduce the viscosity of the aged material but also to restore compatibility. Objective is to establish the technical feasibility (Phase I) of determining the specifications and operating parameters for producing high quality recycling agents which will allow most/all the old asphalt-based road material to be recycled. It is expected that supercritical fractionation can be used. The advanced road aging simulation procedure will be used to study aging of blends of old asphalt and recycling agents.

  19. Use of rubber crumb for preparation of asphalt-concrete mixtures

    Directory of Open Access Journals (Sweden)

    Yerbol Tileuberdi

    2012-03-01

    Full Text Available In this article use of rubber crumb from spent tire for preparation of rubber-bitumen compounds is investigated. Then the rubber-bitumen compositions are used in composition of asphalt concrete mixes .

  20. A Review on Using Crumb Rubber in Reinforcement of Asphalt Pavement

    Directory of Open Access Journals (Sweden)

    Nuha Salim Mashaan

    2014-01-01

    Full Text Available An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste materials, and it is believed that crumb rubber modifier (CRM could be an alternative polymer material in improving hot mix asphalt performance properties. In this paper, a critical review on the use of crumb rubber in reinforcement of asphalt pavement will be presented and discussed. It will also include a review on the effects of CRM on the stiffness, rutting, and fatigue resistance of road pavement construction.

  1. A review on using crumb rubber in reinforcement of asphalt pavement.

    Science.gov (United States)

    Mashaan, Nuha Salim; Ali, Asim Hassan; Karim, Mohamed Rehan; Abdelaziz, Mahrez

    2014-01-01

    An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM) obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste materials, and it is believed that crumb rubber modifier (CRM) could be an alternative polymer material in improving hot mix asphalt performance properties. In this paper, a critical review on the use of crumb rubber in reinforcement of asphalt pavement will be presented and discussed. It will also include a review on the effects of CRM on the stiffness, rutting, and fatigue resistance of road pavement construction. PMID:24688369

  2. Use of rubber crumb for preparation of asphalt-concrete mixtures

    OpenAIRE

    Yerbol Tileuberdi; S. Kozbakarova; Yerdos Ongarbayev; B. Tuleutaev; Zulkhair Mansurov

    2012-01-01

    In this article use of rubber crumb from spent tire for preparation of rubber-bitumen compounds is investigated. Then the rubber-bitumen compositions are used in composition of asphalt concrete mixes .

  3. Investigation of the radiation shielding capacity of asphalt and sand for fast neutron sources

    International Nuclear Information System (INIS)

    The internal wall of the cavity of experimental assemblies, involved with high energy fusion neutrons, can be covered by an asphalt-sand layer for radiation protection purposes. The calculations have demonstrated that asphalt has a radiation protection capability superior to that of concrete, on equivalent weight basis. For an experimental cavity using a 10 (12) neutrons/sec neutron generator, the best structure has been found to be a 10% asphalt-90% red sand homogeneous mixture, against neutron + gamma energies, with a protection capability of more than 200% compared to the same thickness of a concrete structure. This work has proved that the local and cheap asphalt and sand can replace the relatively expensive concrete in constructing biological radiation shielding of experimental assemblies on fusion neutronics. 15 refs

  4. Recycling of petroleum contaminated soils in cold mix asphalt paving materials

    International Nuclear Information System (INIS)

    The purpose of the paper is to evaluate the hazardous characteristics of cold mix asphalt pavements containing both petroleum contaminated sands and clean sands. Research sponsored by the United States Environmental Protection Agency (USEPA), the Electric Power Research Institute (EPRI) and several state agencies has suggested that asphalt incorporation may be useful for treating petroleum contaminated soils and other wastes. However, the most often cited reservation about this technology is the potential for polynuclear aromatic hydrocarbon (PNAH) releases and hydrocarbon air emissions. In most cases these studies were based upon the use of hot batching technologies. Hydrocarbon emissions are also reduced because the mixing occurs at ambient temperatures avoiding the potential emissions from fuel combustion and volatilization of the lighter asphalt fractions. For this reason, cold mix asphalt incorporation is not subject to permitting by the South Coast Air Quality Management District in California

  5. Performance of asphalt and clay liners as a uranium mill tailings leachate barrier

    International Nuclear Information System (INIS)

    Pacific Northwest Laboratory is evaluating the long-term effectiveness of various asphalt and clay liner materials as a radionuclide and process chemical barrier from uranium mill tailings. A field test is being conducted by monitoring asphalt and clay liners installed at the Grand Junction, Colorado tailings site. In addition eight prospective liners have undergone three months exposure to accelerated conditions to predict their behavior over a 1000 year period. High calcium leachates have been forced through thin layers of clay to determine the ability of the clay to resist ion exchange, which reduces its swelling capabilities. Asphalt liners have been exposed to elevated temperatures and increased strengths of oxidizing agents to accelerate their aging process. The permeability coefficients measured during this exposure were then used to predict each liners stability with time. The analyses thus far show that clay soils with bentonite amendments and most asphalt compositions have good long-term performance characteristics. 3 figures, 1 table

  6. Moisture Accumulation Under Asphalt Cover at Radioactive Waste-Burial Site, Discussion

    International Nuclear Information System (INIS)

    Moisture can accumulate under asphalt covers for waste-burial areas, potentially mobilizing components of the waste. This case study describes an asphalt cover emplaced in 1961 to contain plutonium, uranium, beryllium, and lead wastes in an area at the Los Alamos National Laboratory used for underground nonnuclear detonation tests. In this semiarid environment, moisture, apparently from meteoric sources, has accumulated in the soil and tuff below the cover. Saturated conditions are observed to a depth of approx.6 m, while adjacent uncovered areas remain dry. No migration of plutonium or other contaminants has been observed. Remediation of the saturated volume may consist of removal of the asphalt cover and its replacement with a multilayer engineered cover, possibly with venting of the subsurface. The potential for water accumulation should always be considered when asphalt has been used or is proposed as a cover for a waste site

  7. Performance of asphalt and clay liners as a uranium mill tailings leachate barrier

    International Nuclear Information System (INIS)

    Pacific Northwest Laboratory is evaluating the long-term effectiveness of various asphalt clay liner materials as a radionuclide and process chemical barrier from uranium mill tailings. A field test is being conducted by monitoring asphalt and clay liners installed at the Grand Junction, Colorado tailings site. In addition, eight prospective liners have undergone three months exposure to accelerated conditions to predict their behavior over a 1000-year period. High-calcium leachates have been forced through thin layers of clay to determine the ability of the clay to resist ion exchange, which reduces its swelling capabilities. Asphalt liners have been exposed to elevated temperatures and increased strengths of oxidizing agents to accelerate their aging process. The permeability coefficients measured during this exposure were then used to predict each liners stability with time. The analyses thus far show that clay soils with bentonite amendments and most asphalt compositions have good long-term performance characteristics

  8. Contributions of performance-graded asphalt to low temperature cracking resistance of pavements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Loh, S.W.; Olek, J.

    1999-05-01

    The purpose of this research was to study and evaluate the role that asphalt cracking. As part of the Strategic Highway Research Program (SHRP) new specifications for asphalt binders were developed that are based on the performance of the material. The asphalt binder graded and specified according to these new performance-based specifications is called PG binder. These new specifications are commonly referred to as Superpave (Superior Performing Asphalt Pavement) binder specifications. A section of Interstate 64 in southern Indiana was experiencing severe low temperature cracking before it was reconstructed over the summers of 1995 and 1996. The binder used in the new pavement mixes was PG material. Dynamic Shear Rheometer (DSR) tests, Bending Beam Rheometer (BBR) tests, and viscosity tests were performed on this binder. Comparisons were made between test results obtained from the binders in the old pavement and the new pavement. All tests and comparisons were based on the Superpave binder specifications.

  9. Time resolved analysis of water drainage in porous asphalt concrete using neutron radiography

    International Nuclear Information System (INIS)

    Porous asphalt as a road surface layer controls aquaplaning as rain water can drain through its highly porous structure. The process of water drainage through this permeable layer is studied using neutron radiography. Time-resolved water configuration and distribution within the porous structure are reported. It is shown that radiography depicts the process of liquid water transport within the complex geometry of porous asphalt, capturing water films, filled dead end pores and water islands. - Highlights: ► The water drainage process in porous asphalt was studied using neutron radiography. ► Despite similar mix designs, different processes of water transport were established. ► Water transport within porous asphalt showed filled dead end pores and water islands

  10. Influence of Polyethylene Glycol on Asphaltic Concrete for Cubical and Rod shaped Aggregates

    Directory of Open Access Journals (Sweden)

    U. Arun Kumar

    2014-02-01

    Full Text Available Aggregates are the principle material in pavement construction. Conventional road aggregates in India are natural aggregates obtained by crushing rocks. Aggregate characteristics such as particle size, shape, and texture etc.., influence the performance and serviceability of pavement. Pavements laid with polymer modified asphalt exhibits greater resistance to rutting, thermal cracking and fatigue damages and hence these were used at locations of higher stress. The present work concentrates on aggregate characteristics which include the shape indices. The particle shapes namely Cubical and Rod are being used in the study. The study shows the behavior of the two shapes of aggregate in terms of Penetration, Ductility, Softening Point and Marshall Stability tests with varying percentages of asphalt and also with varying the percentages of PEG. The results of unmodified asphalt mix are compared with the modified asphalt mix against some critical Marshall Mix parameters.

  11. Effects of compaction method on the properties of asphalt concrete for dams and dykes

    Energy Technology Data Exchange (ETDEWEB)

    Grenier, Simon [Groupe Qualitas Inc., Montreal, (Canada); Konrad, Jean-Marie [University Laval, Quebec, (Canada); Perraton, Daniel [Ecole de technologie superieure, Montreal, (Canada); Peloquin, Eric [Hydro-Quebec, Montreal, (Canada); Longtin, Hugo [SNC-Lavalin, Montreal, (Canada)

    2010-07-01

    Asphalt concrete is used in embankment dams as an impervious lining on the upstream face or in the interior as a core wall. The mix needs to be compacted to a specific density to ensure low permeability, ductility and flexibility of the materiel. This paper investigated the influence of three compaction methods on the stress-strain curves and the strength of the asphalt concrete mixture. Comparisons between laboratory and field compaction methods of asphalt concrete mix with high bitumen content were carried out. Triaxial tests results on samples from the Nemiscau-1 Dam constructed in 2008 in Quebec, Canada and on laboratory-compacted asphalt concrete samples were compared. The results showed that the differences between materials can be explained by the specific aggregate structure obtained for each compaction method, which results in preferential grain orientation and in more or less interlocking between grains.

  12. Effect of Components on the Performance of Asphalt Modiifed by Waste Packaging Polyethylene

    Institute of Scientific and Technical Information of China (English)

    ZHANG Maorong; FANG Changqing; ZHOU Shisheng; CHENG Youliang; YU Ruien; LIU Shaolong; LIU Xiaolong; SU Jian

    2016-01-01

    Waste packaging polyethylene (WPE) was used to modify raw asphalt by melt blending the components at 190℃ for 1 h in a simple mixer and subsequently machining them at 120℃ for 1 h in a high-speed shearing machine. The effect of modiifcation on the degree of the penetration, the softening point and the ductility of the asphalt was studied using lfuorescent microscopy, infrared spectrometry, component changes and various other techniques. The experimental results showed that no chemical reactions took place in the components themselves (saturate, aromatic, asphaltene and resin) during the modifications. The softening point and penetration of the asphalt were found to be closely related to the resulting contents of the asphaltene, saturate and resin components. In addition, aromatics were identified as having the greatest impact on the ductility of the asphalt.

  13. Effects of Fiber Finish on the Performance of Asphalt Binders and Mastics

    Directory of Open Access Journals (Sweden)

    Bradley J. Putman

    2011-01-01

    Full Text Available The objective of this study was to determine the effects of finishes applied to polyester fibers on the properties of asphalt binders and mastics. Asphalt binders were mixed with finishes that were extracted from the fibers, and mastics were also made with binder and fibers (with and without finish to isolate the effects of the finish. The results indicated that crude source plays a significant role in how the fiber finish affects the binders and mastics. Additionally different finishes had different effects on binder properties. The major finding of this study is that different polyester fibers, even from the same manufacturer, may not necessarily perform the same in an asphalt mixture. It is important to use fibers that are compatible with the particular asphalt binder that is being used because of the significance of the binder source on the interaction between the finish and the binder.

  14. Rheology of crumb-rubber modified asphalt binders and mixes

    Science.gov (United States)

    Sheth, Vikas Rameshchandra

    Laboratory test procedures are presented to determine the rheological properties of crumb rubber modified asphalt (CRMA) binders and mixes. These tests provide simple, fast, and cost-effective alternatives to evaluate the performance (rutting and cracking potential) of binders and mixes used for pavement construction. Viscoelastic properties of CRMA binders are measured using dynamic shear analysis. Master curves were generated using the principle of time-temperature superposition to evaluate the effects of aging, rubber concentration, and curing conditions on the rheology of the modified binder. Results indicate that the rheology of CRMA binders can be divided into three regions of viscoelasticity: glassy region at high frequencies, transition/viscoelastic region at intermediate frequencies, and viscous region at low frequencies. Modification of the asphalt by addition of rubber leads to an improvement in both the high and low temperature properties, as reflected by changes in Gsp' and Gsp{''}, which causes the binder to have a greater resistance to specific pavement failure mechanisms. Both transient and dynamic properties of CRMA mixes were measured in the laboratory using the creep and recovery, direct tension, and frequency sweep tests. Rheological properties of the mix generated from the test data were compared to those of the binder to evaluate the effect of aging, rubber concentration, and curing conditions on mix performance. Several rheological parameters have been identified to characterize the rutting and cracking potential of mixes. A power law equation was found to give good correlations between several mix rheological parameters. Analysis of binder and mix failure energies show that work of cohesion of the binder is negligible compared to the failure energies. A unique relationship between Paris law material parameters has been confirmed. It is also shown that mix failure properties bear a one-to-one correlation with binder failure properties. Based

  15. Enhancing Asphalt Binder's Rheological Behavior and Aging Susceptibility Using Nano-Particles

    Science.gov (United States)

    Walters, Renaldo C.

    The life expectancy of Asphalt Binder (AB) has been negatively impacted by the harsh bombardment of UV rays. UV rays cause asphalt to oxidize faster which results in deterioration of asphalt rheological characteristics that can lead to pavement distresses. This study investigates the impact that nano-particles and bio modification have on the aging susceptibility of asphalt binder. As such, the following hypothesis was investigated: Introduction of nano particles to asphalt binder will reduce asphalt oxidation aging by increasing the inter layer spacing of the nano particles. Two nano scale materials were used for this study, nano-clay and bio-char as well as one micro scale material, silica fume. Nano-clay (Cloisite 30B) is a naturally occurring inorganic mineral. Bio-char is the waste product from bio-binder production. Bio-binder is produced from swine manure using a thermochemical conversion process. This process is then followed by a filtration procedure where the bio-char is produced. Chemical and physical properties of bio-char showed a significant presence of carbon which could in turn reduce the rate of asphalt oxidation. Silica Fume is an ultra-fine powder collected as a by-product of silicon and ferrosilicon alloy production and consists of spherical particles. In this study several mixtures are designed and evaluated using RV testing (Rotational Viscometer), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). Nano-clay is blended at 2% and 4% by weight of dry mass, with and without bio-binder (5% by weight of dry mass). Bio-char is grinded to nano scale and added to the virgin asphalt binder (PG 64-22) at 2%, 5% and 10% by weight of dry mass. Silica Fume is added to virgin asphalt binder (PG 64-22) at 2%, 4% and 8% by weight of dry mass. The optimum percent of nano scale material that is added to virgin asphalt binder is expected to reduce aging susceptibility of asphalt binder, extending its service life.

  16. Genetic Optimization Method of Asphalt Pavement Based on Rutting and Cracking Control

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Nowadays asphalt pavement structure bearing is not the main subject for pursuers to study.Comparatively,the pavement performance is more important and emphasized.Based on this,rutting and cracking analysis is introduced into pavement optimization.A optimization model based on these two considerations is also established.The genetic algorithms (GAs) is adopted to solve the model.It is an intellective method.This research provides a new idea and technique for asphalt pavement structure optimization.

  17. Drying and Heating Modelling of Granular Flow: Application to the Mix-Asphalt Processes

    Directory of Open Access Journals (Sweden)

    L Le Guen

    2011-01-01

    Full Text Available Concrete asphalt is a hydrocarbon material that includes a mix of mineral components along with a bituminous binder. Prior to mixing, its production protocol requires drying and heating the aggregates. Generally performed in a rotary drum, these drying and heating steps within mix asphalt processes have never been studied from a physical perspective. We are thus proposing in the present paper to analyze the drying and heating mechanisms when granular materials and hot gases are involved in a co-current flow. This process step accounts for a large proportion of the overall energy consumed during hot-mix asphalt manufacturing. In the present context, the high energy cost associated with this step has encouraged developing new strategies specifically for the drying process. Applying new asphalt techniques so that an amount of moisture can be preserved in the asphalt concrete appears fundamental to such new strategies. This low-energy asphalt, also referred to as the "warm technique", depends heavily on a relevant prediction of the actual moisture content inside asphalt concrete during the mixing step. The purpose of this paper is to present a physical model dedicated to the evolution in temperature and moisture of granular solids throughout the drying and heating steps carried out inside a rotary drum. An initial experimental campaign to visualize inside a drum at the pilot scale (i.e. 1/3 scale has been carried out in order to describe the granular flow and establish the necessary physical assumptions for the drying and heating model. Energy and mass balance equations are solved by implementing an adequate heat and mass transfer coupling, yielding a 1D model from several parameters that in turn drives the physical modeling steps. Moreover, model results will be analyzed and compared to several measurements performed in an actual asphalt mix plant at the industrial scale (i.e. full scale.

  18. The Application of Asphalt Cold Recycling Technology in Lower Yellow River Flood Control Project

    OpenAIRE

    Zhao Yu Kun; Li Qing An

    2016-01-01

    Asphalt cold recycling technology has many advantages, such as rapid construction, energy saving, and environmental protection. In this article, the works based on the flood control dike road repair of lower Yellow River flood control project and cold asphalt recycling technology. Combined with the current flood control dike road in Liaocheng, the old pavement rehabilitation program was designed and the program was successfully implemented. It provided a successful reference cases for applica...

  19. Time resolved analysis of water drainage in porous asphalt concrete using neutron radiography.

    Science.gov (United States)

    Poulikakos, L D; Sedighi Gilani, M; Derome, D; Jerjen, I; Vontobel, P

    2013-07-01

    Porous asphalt as a road surface layer controls aquaplaning as rain water can drain through its highly porous structure. The process of water drainage through this permeable layer is studied using neutron radiography. Time-resolved water configuration and distribution within the porous structure are reported. It is shown that radiography depicts the process of liquid water transport within the complex geometry of porous asphalt, capturing water films, filled dead end pores and water islands.

  20. Modeling of asphalt-rubber rotational viscosity by statistical analysis and neural networks

    OpenAIRE

    Luciano Pivoto Specht; Oleg Khatchatourian; Lélio Antônio Teixeira Brito; Jorge Augusto Pereira Ceratti

    2007-01-01

    It is of a great importance to know binders' viscosity in order to perform handling, mixing, application processes and asphalt mixes compaction in highway surfacing. This paper presents the results of viscosity measurement in asphalt-rubber binders prepared in laboratory. The binders were prepared varying the rubber content, rubber particle size, duration and temperature of mixture, all following a statistical design plan. The statistical analysis and artificial neural networks were used to c...

  1. A Study on the Rheological Properties of Recycled Rubber-Modified Asphalt Mixtures

    OpenAIRE

    Murat Karacasu; Volkan Okur; Arzu Er

    2015-01-01

    Using waste rubber in asphalt mixes has become a common practice in road construction. This paper presents the results of a study on the rheological characteristics of rubber-modified asphalt (RMA) concrete under static and dynamic loading conditions. A number of static and dynamic creep tests were conducted on RMA mix specimens with different rubber sizes and contents, and a series of resonant column tests were conducted to evaluate the shear modulus and damping values. To simulate the stres...

  2. A Review on Using Crumb Rubber in Reinforcement of Asphalt Pavement

    OpenAIRE

    Nuha Salim Mashaan; Asim Hassan Ali; Mohamed Rehan Karim; Mahrez Abdelaziz

    2014-01-01

    An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM) obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste materials, and it is believed that crumb rubber modifier (CRM) could be an alternative polymer material in i...

  3. Assessment of the performance of asphalt rubber layers on noise abatement

    OpenAIRE

    Freitas, Elisabete; Pereira, Paulo; Anfosso Ledee, Fabienne

    2008-01-01

    Layers with a very high content of rubber have shown to be very effective on noise abatement despite their reduced durability. On the contrary, layers with a rubberized asphalt binder have shown to be durable, but their performance regarding noise abatement is not consensual yet. This paper aims at assessing the effect of the use of layers with rubberized asphalt binder on noise abatement. For this purpose seven road sections with different surface types, among which five gap graded and three...

  4. Investigation of the Physical and Molecular Properties of Asphalt Binders Processed with Used Motor Oils

    OpenAIRE

    Mohyeldin Ragab; Magdy Abdelrahman

    2015-01-01

    In this work we investigated the performance aspects of addition of used motor oils (UMO) to neat and crumb rubber modified asphalts (CRMA) and related that to the change of molecular size distribution of modified asphalt’s fractions; asphaltenes, saturates, naphthene aromatics, and polar aromatics. Based on the results of temperature sweep viscoelastic tests, addition of crumb rubber modifier (CRM) alone or with UMO results in the formation of internal network within the modified asphalt. Ba...

  5. Research on the Microstructure and Property of an Anion Rubber Modified Asphalt

    OpenAIRE

    Wei Hong; Qingshan Li; Guoquan Guan; Youbo Di; Jing Sun; Tifeng Jiao; Guangzhong Xing

    2013-01-01

    The anion rubber modified asphalt (ARMA) mixture was first successfully developed with a unique process. In the development process, rubber and asphalt were mixed in the same proportion. Furthermore, the microstructure and modification mechanism of the material were characterized by SEM, FT-IR, TG, and XRD tests. The mechanical property of the mixture was also tested in accordance with the relevant standards. In the end, the material’s capacity of releasing anion was measured by DLY-6A232 atm...

  6. Assessment of the performance of asphalt rubber layers on noise abatement

    OpenAIRE

    Freitas, Elisabete F.; Pereira, Paulo A. A.; Anfosso-Lédée, Fabienne

    2008-01-01

    Layers with a very high content of rubber have shown to be very effective on noise abatement despite their reduced durability. On the contrary, layers with a rubberized asphalt binder have shown to be durable, but their performance regarding noise abatement is not consensual yet. This paper aims at assessing the effect of the use of layers with rubberized asphalt binder on noise abatement. For this purpose seven road sections with different surface types, among which five gap grad...

  7. Black curves and creep behaviour of crumb rubber modified binders containing warm mix asphalt additives

    Science.gov (United States)

    Gallego, Juan; Rodríguez-Alloza, Ana María; Giuliani, Felice

    2016-03-01

    Warm mix asphalt (WMA) is a new research topic in the field of road pavement materials. This technology allows lower energy consumption and greenhouse gas (GHG) emissions by reducing compaction and placement temperatures of the asphalt mixtures. However, this technology is still under study, and the influence of the WMA additives has yet to be investigated thoroughly and clearly identified, especially in the case of crumb rubber modified (CRM) binders.

  8. Performance Evaluation of Crumb Rubber Modified Stone Mastic Asphalt Pavement in Malaysia

    OpenAIRE

    Nuha Salim Mashaan; Ali, Asim H.; Suhana Koting; Mohamed Rehan Karim

    2013-01-01

    To prevent pavement distresses there are various solutions such as adopting new mix designs or utilisation of asphalt additives. The primary aim of this study was to investigate the effect of adding crumb tyre rubber as an additive to SMA mixture performance properties. This study investigated the essential aspects of modified asphalt mixtures in order to better understand the influence of CRM modifiers on volumetric, mechanical, and stiffness properties of SMA mixture. In this study, virgin ...

  9. Experimental Investigation of the Matching Relationship between Asphalt Particle and Reservoir Pore in Profile Control Process

    OpenAIRE

    Ren, Chengfeng; Li, Junjian; Li, Yiqiang; Yuan, Jingshu; Xi, Yanqiang; Xiao, Kang; Wang, Yuxi

    2016-01-01

    Modified sulfonated asphalt particles have a bright application prospect of the profile control of thick reservoirs due to the low cost, extensive sources, and good compatibility with reservoir. Nevertheless, the matching relationship between asphalt particles and reservoir pore has seldom been investigated till now. Oversized particles always block the near-wellbore area, which causes high injection pressures, while undersized particles cannot plug large pores. We designed a core for this ex...

  10. Use of Reclaimed Asphalt Pavement (RAP) Under Superpave Specifications: A Regional Pooled Fund Project

    OpenAIRE

    McDaniel, Rebecca; Soleymani, Hamid; Shah, Ayesha

    2002-01-01

    This regional pooled fund project was conducted to investigate the performance of Superpave asphalt mixtures incorporating RAP. This study was closely coordinated with a national study on the same topic (NCHRP 9-12, Incorporation of Reclaimed Asphalt Pavement in the Superpave System). Specifically, this regional project looked at typical materials from the North Central United States to determine if the findings of NCHRP 9-12 were valid for Midwestern materials and to expand the NCHRP finding...

  11. Black curves and creep behaviour of crumb rubber modified binders containing warm mix asphalt additives

    Science.gov (United States)

    Gallego, Juan; Rodríguez-Alloza, Ana María; Giuliani, Felice

    2016-08-01

    Warm mix asphalt (WMA) is a new research topic in the field of road pavement materials. This technology allows lower energy consumption and greenhouse gas (GHG) emissions by reducing compaction and placement temperatures of the asphalt mixtures. However, this technology is still under study, and the influence of the WMA additives has yet to be investigated thoroughly and clearly identified, especially in the case of crumb rubber modified (CRM) binders.

  12. The influence of recycled asphalt pavement on 20mm binder course mix performance

    OpenAIRE

    Tabakovic, Amir; Gibney, Amanda; Gilchrist, M. D.; McNally, Ciaran

    2006-01-01

    This paper presents the results of ongoing research on the mechanical performance of a 20mm binder course asphalt pavement mix incorporating recycled asphalt pavement (RAP). A series of binder course mixes were designed containing varying percentages of RAP. A mix made only from virgin material was selected as the control mix for the investigation. The effect of introducing RAP into the binder course mix was evaluated through a series of laboratory tests including the Marshall Test, Indire...

  13. Optimizing Laboratory Mixture Design as It Relates to Field Compaction to Improve Asphalt Mixture Durability

    OpenAIRE

    Hekmatfar, Ali; McDaniel, Rebecca S; Shah, Ayesha; Haddock, John E.

    2015-01-01

    Most departments of transportation, including Indiana, currently use the Superpave mixture design method to design asphalt mixtures. This method specifies that the optimum asphalt content for a given gradation be selected at 4 percent air voids. During construction, these mixtures are typically compacted to 7-8 percent air voids. If mixtures were designed to be more compactable in the field they could be compacted to the same density as the laboratory mixture design, which would increase pave...

  14. Self Healing of Asphalt Mixtures: Towards a Better Understanding of the Mechanism

    OpenAIRE

    Qiu, J.

    2012-01-01

    Traffic is increasing rapidly in terms of number of vehicles and also in axle loads. In order to maximize the availability of the pavement and to minimize hindrances to traffic because of maintenance works, long life pavements are needed. An asphalt pavement with self repairing capabilities is believed to be very useful to this respect. The self healing phenomenon of asphalt mixtures is known for many years by road engineers. Bituminous materials are expected to repair themselves during hot s...

  15. Time resolved analysis of water drainage in porous asphalt concrete using neutron radiography.

    Science.gov (United States)

    Poulikakos, L D; Sedighi Gilani, M; Derome, D; Jerjen, I; Vontobel, P

    2013-07-01

    Porous asphalt as a road surface layer controls aquaplaning as rain water can drain through its highly porous structure. The process of water drainage through this permeable layer is studied using neutron radiography. Time-resolved water configuration and distribution within the porous structure are reported. It is shown that radiography depicts the process of liquid water transport within the complex geometry of porous asphalt, capturing water films, filled dead end pores and water islands. PMID:23500651

  16. A STUDY OF FATIGUE LIFE OF ASPHALT CONCRETE BASED ON SHUNGITE MINERAL POWDER

    OpenAIRE

    D. I. Chernousov; Vl. P. Podolsky; E. V. Trufanov; B. A. Bondarev

    2011-01-01

    Problem statement. Shortage of mineral powder stimulates seeking of new materials and technologiesby which traditional ones can be replaced without deterioration of their operating properties. Thatis why a study of mineral powder from shungite and development of new technologies of arrangementof high quality and durable asphalt concrete pavement based on shungite is an actual problem.Results. Bearing capacity and service life of asphalt concrete pavement is most completely characterizedby mod...

  17. Influence of Subgrade and Unbound Granular Layers Stiffness on Fatigue Life of Hot Mix Asphalts - HMA

    OpenAIRE

    Hugo A. Rondón-Quintana; Wilmar D. Fernández-Gómez; Jesús A. Hernández-Noguera

    2013-01-01

    The mainly factors studied to predict fatigue life of hot mix asphalt-HMA in flexible pavements are the loading effect, type of test, compaction methods, design parameters of HMA (e.g., particle size and size distribution curve, fine content, type of bitumen) and the variables associated with the environment (mainly moisture, temperature, aging). This study evaluated through a computer simulation, the influence of the granular layers and subgrade on the fatigue life of asphalt layers in flexi...

  18. Aging Influence on Fatigue Characteristics of RAC Mixtures Containing Warm Asphalt Additives

    OpenAIRE

    Feipeng Xiao; Wenbin Zhao; Serji N. Amirkhanian

    2010-01-01

    Aging is an important factor to affect the long-term performance of asphalt pavement. The fatigue life of a typical warm mix asphalt (WMA) is generally related to various factors of rheological and mechanical properties of the mixture. The study of the fatigue behavior of the specific rubberized WMA is helpful in recycling the scrap tires and saving energy in terms of the conventional laboratory aging process. This study explores the utilization of the conventional fatigue analysis approach i...

  19. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review

    OpenAIRE

    Haiping Zhou; Sri Holikatti; Peter Vacura

    2014-01-01

    The California Department of Transportation (Caltrans) has been using scrap tire rubber in asphalt pavements since the 1970s in chip seals and the 1980s in rubberized hot mix asphalt(RHMA). Both the wet (field blend) and dry processes were used in early trials. Caltrans has also used rubber modified binders containing both crumb rubber modifier and polymer modifier that could be manufactured at a refinery facility, a terminal blend wet process. Since the beginning of this century, Caltrans in...

  20. A multiscale model for predicting the viscoelastic properties of asphalt concrete

    Science.gov (United States)

    Garcia Cucalon, Lorena; Rahmani, Eisa; Little, Dallas N.; Allen, David H.

    2016-08-01

    It is well known that the accurate prediction of long term performance of asphalt concrete pavement requires modeling to account for viscoelasticity within the mastic. However, accounting for viscoelasticity can be costly when the material properties are measured at the scale of asphalt concrete. This is due to the fact that the material testing protocols must be performed recursively for each mixture considered for use in the final design.

  1. Permanent Deformation of Asphalt Concrete Pavements: A Nonlinear Viscoelastic Approach to Mix Analyses and Design

    OpenAIRE

    Long, Fenella Margare

    2001-01-01

    Because pavements are being subjected to increasingly heavy loads, many mix design procedures currently in use may not adequately prevent permanent deformation (rutting) in asphalt concrete. This dissertation describes the development of a nonlinear viscoelastic constitutive model that can be used in mix analyses to design rut-resistant mixes. Shear deformation is the dominant cause of rutting in asphalt concrete, a nonlinear viscoelastic material. To determine the viscoelastic shear...

  2. Using critical state theory and Modified Hveem Stabilometer for modelling asphalt material behaviour

    OpenAIRE

    Huerne, ter, H.L.; Ven, van de, P.M.; Molenaar, A.A.A.; Maarseveen, van, J.G.S.J.

    2004-01-01

    The correct compaction level is crucial for the realisation of high quality asphalt roads. However, reaching the correct compaction level requires knowledge of the material behaviour during compaction; the material change from just slightly compacted into densely compacted. The paper discusses how a material model adopted from soil mechanics is tested for modelling the material behaviour of asphalt mixes. In the first part of the paper the Hveem Stabilometer is discussed, an existing test dev...

  3. Normalization method for asphalt mixture fatigue equation under different loading frequencies

    Institute of Scientific and Technical Information of China (English)

    吕松涛; 郑健龙

    2015-01-01

    In order to analyze the effect of different loading frequencies on the fatigue performance for asphalt mixture, the changing law of asphalt mixture strengths with loading speed was revealed by strength tests under different loading speeds. Fatigue equations of asphalt mixtures based on the nominal stress ratio and real stress ratio were established using fatigue tests under different loading frequencies. It was revealed that the strength of the asphalt mixture is affected by the loading speed greatly. It was also discovered that the fatigue equation based on the nominal stress ratio will change with the change of the fatigue loading speed. There is no uniqueness. But the fatigue equation based on the real stress ratio doesn’t change with the loading frequency. It has the uniqueness. The results indicate the fatigue equation based on the real stress ratio can realize the normalization of the asphalt mixture fatigue equation under different loading frequencies. It can greatly benefit the analysis of the fatigue characteristics under different vehicle speeds for asphalt pavement.

  4. Microstructure modeling and virtual test of asphalt mixture based on three-dimensional discrete element method

    Institute of Scientific and Technical Information of China (English)

    马涛; 张德育; 张垚; 赵永利; 黄晓明

    2016-01-01

    The objective of this work is to model the microstructure of asphalt mixture and build virtual test for asphalt mixture by using Particle Flow Code in three dimensions (PFC3D) based on three-dimensional discrete element method. A randomly generating algorithm was proposed to capture the three-dimensional irregular shape of coarse aggregate. And then, modeling algorithm and method for graded aggregates were built. Based on the combination of modeling of coarse aggregates, asphalt mastic and air voids, three-dimensional virtual sample of asphalt mixture was modeled by using PFC3D. Virtual tests for penetration test of aggregate and uniaxial creep test of asphalt mixture were built and conducted by using PFC3D. By comparison of the testing results between virtual tests and actual laboratory tests, the validity of the microstructure modeling and virtual test built in this study was verified. Additionally, compared with laboratory test, the virtual test is easier to conduct and has less variability. It is proved that microstructure modeling and virtual test based on three-dimensional discrete element method is a promising way to conduct research of asphalt mixture.

  5. Performance evaluation of open-graded epoxy asphalt concrete with two nominal maximum aggregate sizes

    Institute of Scientific and Technical Information of China (English)

    罗桑; 钱振东; 薛永超

    2015-01-01

    Open-graded friction course (OGFC) is applied to pavement surfaces to increase driving safety under wet conditions, and recently, to reduce tire/pavement noise. The durability of OGFC, however, has been a concern since conventional OGFC mixes last typically less than ten years before major maintenance or rehabilitation is needed. This work investigates a new open-graded asphalt mixture that uses epoxy asphalt as binder to improve mix durability. One type of epoxy asphalt that has been successfully applied to dense-graded asphalt concrete for bridge deck paving was selected. A procedure of compacting the mix into slab specimens was developed and a series of laboratory tests were conducted to evaluate the performance of the new mix, including Cantabro loss, permeability, friction, shear strength, and wheel rutting tests. Results show superior overall performance of the open-graded epoxy asphalt mix compared to conventional open-graded asphalt mix. There are also preliminary indications that the OGFC mix with 4.75-mm NMAS gradation can improve the resistance performance to raveling, while the OGFC mix with 9.5-mm NMAS gradation can improve the performance of surface friction at a high slip speed.

  6. Performance evaluation of open-graded epoxy asphalt concrete with two nominal maximum aggregate sizes

    Institute of Scientific and Technical Information of China (English)

    罗桑; 钱振东; 薛永超

    2015-01-01

    Open-graded friction course(OGFC) is applied to pavement surfaces to increase driving safety under wet conditions, and recently, to reduce tire/pavement noise. The durability of OGFC, however, has been a concern since conventional OGFC mixes last typically less than ten years before major maintenance or rehabilitation is needed. This work investigates a new open-graded asphalt mixture that uses epoxy asphalt as binder to improve mix durability. One type of epoxy asphalt that has been successfully applied to dense-graded asphalt concrete for bridge deck paving was selected. A procedure of compacting the mix into slab specimens was developed and a series of laboratory tests were conducted to evaluate the performance of the new mix, including Cantabro loss, permeability, friction, shear strength, and wheel rutting tests. Results show superior overall performance of the open-graded epoxy asphalt mix compared to conventional open-graded asphalt mix. There are also preliminary indications that the OGFC mix with 4.75-mm NMAS gradation can improve the resistance performance to raveling, while the OGFC mix with 9.5-mm NMAS gradation can improve the performance of surface friction at a high slip speed.

  7. Influence of limestone fillers on combustion characteristics of asphalt mortar for pavements

    International Nuclear Information System (INIS)

    Asphalt materials will be ignited and release significant toxic fumes within tunnel fires. Thus, combustion characteristics of asphalt materials used in road tunnel should be studied in order to limit such an adverse effect. In the present work we study the influence of limestone fillers on combustion characteristics of asphalt mortar by thermogravimetric and kinetic analysis. It is shown that the combustion of asphalt mortar is not just a linear superposition of asphalt and limestone. The limestone will increase the ignition point and the activation energy of the primary volatile release, and will catalyze the char formation from the primary volatile release. Kinetic analysis shows that the primary volatile release stage of asphalt mortar combustion can be explained by a three-dimensional diffusion model, the secondary volatile release and char combustion stage can be explained by a model under the assumption of random nucleation and nuclei growth, whereas the limestone decomposition stage appears to follow the one-dimensional phase boundary model. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  8. Experimental investigation of the fatigue behaviour of asphalt concrete mixtures containing waste iron powder

    International Nuclear Information System (INIS)

    Research highlights: → This paper presents the first model of the fatigue behaviour of iron-asphalt mixtures in the world. → This model is able to describe the fatigue behaviour of iron-asphalt under dynamic loading. → Coarse surface, high stiffness and angularity of iron powder lead to enhanced fatigue performance. → The model illustrates that the use of iron powder has a considerable effect on tensile strain of HMA. → The use of this type of waste material could be a helpful solution for less polluted environment. - Abstract: The use of additives and admixtures in the construction of asphalt concrete pavements to strengthen them against dynamic loads has increased considerably in recent years. Recent research has shown that employing desirable waste materials in hot mix asphalts (HMAs) improves their dynamic properties noticeably. The study of some special cases, such as the addition of blast furnace slag and metallic materials of waste electronic instruments to HMA, has led to a considerable increase in the ability of HMAs to tolerate fatigue phenomena and repeated loading. Based on experimental studies, a model is proposed to describe the fatigue behaviour of asphalt mixtures containing waste iron powder. The results of this research show an important increase in the strength of asphalt mixtures containing waste iron powder against fatigue phenomena in comparison to conventional HMAs.

  9. Investigation of Low Heat Accumulation Asphalt Mixture and Its Impact on Urban Heat Environment.

    Directory of Open Access Journals (Sweden)

    Jianguang Xie

    Full Text Available This study is focused on investigating the effectiveness of low heat accumulation asphalt mixture and its impact on the urban heat environment. Infrared radiation experiments showed that the temperature of the asphalt mixture decreased with the increase in far-infrared radiant material. The results also revealed that, compared to asphalt with 0% far-infrared radiant content, the asphalt material with a certain ratio of far-infrared radiation material had higher stability at high and low temperatures as well as good water absorption capacity. The Marshall stability of the specimen mixed with 6% far-infrared radiant was higher by 12.2% and had a residual stability of up to 98.9%. Moreover, the low-temperature splitting tensile strength of the asphalt mixture with 6% far-infrared radiation material increased by 21.3%. The friction coefficient of the asphalt mixtures with 6% and 12% far-infrared radiation material increased by 17.7% and 26.9%, respectively.

  10. A hybrid strategy in selecting diverse combinations of innovative sustainable materials for asphalt pavements

    Directory of Open Access Journals (Sweden)

    Baron Colbert

    2016-04-01

    Full Text Available This project integrates recent innovations of recycled materials used in designing and building sustainable pavements. An increasing environmental awareness and the demand for improving economic and construction efficiencies, through measures such as construction warrantees and goals to reduce air pollution under the Kyoto Protocol, have increased the efforts to implement sustainable materials in roadways. The objective of this research is to develop a systematic approach toward selecting optimum combinations of sustainable materials for the construction of asphalt pavements. The selected materials, warm mix asphalt (WMA, recycled asphalt shingles (RAS, and reclaimed asphalt pavement (RAP were incorporated in this study. The results of this research are intended to serve as guidelines in the selection of the mixed sustainable materials for asphalt pavements. The approach developed from this project draws upon previous research efforts integrating graphical modeling with optimizing the amount of sustainable materials based on the performance. With regard to moisture susceptibility and rutting potential test results, as well as the MIM analysis based on a 95% confidence interval, the rutting performance and moisture susceptibility of asphalt mixtures are not significantly different regardless of the percentages of RAS, RAP, or WMA. The optimum mixture choices could be made by the plant emission rankings with consideration of the optimal WMA types, percentages of RAS/RAP, and WMA production temperatures. The WMA mixtures prepared with 75% RAP and Advera® WMA have produced the lowest CO2 emissions among the investigated mixture types.

  11. A study on engineering characteristics of asphalt concrete using filler with recycled waste lime.

    Science.gov (United States)

    Sung Do, Hwang; Hee Mun, Park; Suk keun, Rhee

    2008-01-01

    This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures. PMID:17408942

  12. Use of ground-penetrating radar for asphalt thickness determination

    Science.gov (United States)

    Choubane, Bouzid; Fernando, Emmanuel; Ross, Stephen C.; Dietrich, Bruce T.

    2003-07-01

    A computer program, called TERRA (Thickness Evaluation of Roads by RAdar) was recently developed for estimating pavement layer thicknesses from ground penetrating radar (GPR) data. This program incorporates decision criteria for automated detection of layer interfaces, computation of layer thicknesses and a segmentation algorithm for delineating segments based on layer thicknesses. The Florida Department of Transportation (FDOT) initiated the present field study for an initial assessment of TERRA. Radar and core data were collected from several flexible pavement sections of Florida's roadway system. These sites were selected to represent the present Florida in-place mixes (Superpave and Marshall mixtures) and different asphalt layer thicknesses, which varied from approximately 50 to 300 mm (2 to 12 in). Radar data were collected at both highway speeds and in stationary mode. This paper presents a description of the data collection effort as well as the subsequent analysis and findings.

  13. Investigation of Adding Proportion of RAP in Recycled Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    Cao He

    2016-01-01

    Full Text Available According to the relationship between gradation and proportion of Reclaimed Asphalt Pavement (RAP and design gradation of recycled mixture, the authors discussed the influence of proportion of RAP on gradation adjustment of recycled mixture. And then, recycled mixture with 0%, 30%, 50%, 70% of RAP were made, and Influence of proportion of RAP on high and low temperature performance, water stability and anti-aging performance of recycled mixture were discussed. The results and analysis indicate that gradation of recycled mixture would not be adjusted to aiming gradation if proportion of RAP was too big. With the increase of proportion of RAP, high temperature performance and anti-aging performance of recycled mixture enhanced, but low temperature performance and water stability decayed sharply. In practical application, reasonable proportion of RAP should be determined according to gradation, performance demand and economy of recycled mixture.

  14. Parameter Characterisation of Asphalt Mixtures for Visco-Elastoplastic Analysis

    Institute of Scientific and Technical Information of China (English)

    陆阳; 廖敬梅; 廖军

    2002-01-01

    Asphalt mixtures exhibit strong viscous properties under repetitive loads. This phenomenon can be simulated in creep and recovery tests. By applying the visco-elastoplastic model proposed, data recorded in the tests are interpreted. It is emphasised that applicability of the visco-elastoplastic model depends on the proper method of characterising parameters involved in the constitutive equations. Since two or more strain components of elasticity and viscosity coexist during the loading or unloading, a measuring system of two loggers is introduced to decouple these components. Test data are analysed in three steps as elastic, visco-elastic and visco-plastic evaluations, using the records collected at the moment of unloading, during the periods of recovery and creep respectively. Factors that may influence the accuracy of data analysis are also discussed.

  15. Characteristics of dynamic triaxial testing of asphalt mixtures

    Science.gov (United States)

    Ulloa Calderon, Alvaro

    Due to the increasing traffic loads and tire pressures, a serious detrimental impact has occurred on flexible pavements in the form of excessive permanent deformation once the critical combination of loading and environmental conditions are reached. This distress, also known as rutting, leads to an increase in road roughness and ultimately jeopardizes the road users' safety. The flow number (FN) simple performance test for asphalt mixtures was one of the final three tests selected for further evaluation from the twenty-four test/material properties initially examined under the NCHRP 9-19 project. Currently, no standard triaxial testing conditions in terms of the magnitude of the deviator and confining stresses have been specified. In addition, a repeated haversine axial compressive load pulse of 0.1 second and a rest period of 0.9 second are commonly used as part of the triaxial testing conditions. The overall objective of this research was to define the loading conditions that created by a moving truck load in the hot mixed asphalt (HMA) layer. The loading conditions were defined in terms of the triaxial stress levels and the corresponding loading time. Dynamic mechanistic analysis with circular stress distribution was used to closely simulate field loading conditions. Extensive mechanistic analyses of three different asphalt pavement structures subjected to moving traffic loads at various speeds and under braking and non-braking conditions were conducted using the 3D-Move model. Prediction equations for estimating the anticipated deviator and confining stresses along with the equivalent deviator stress pulse duration as a function of pavement temperature, vehicle speed, and asphalt mixture's stiffness have been developed. The magnitude of deviator stress, sigmad and confining stress, sigmac, were determined by converting the stress tensor computed in the HMA layer at 2" below pavement surface under a moving 18-wheel truck using the octahedral normal and shear

  16. Influence of digestion time on the mechanical properties of gap graded hot mixes produced with asphalt rubber binders

    OpenAIRE

    Dantas Neto, Silvrano Adonias; Farias, Márcio Muniz de; Pais, Jorge C.

    2009-01-01

    Asphalt rubber binders are produced by mixing crumb rubber obtained from ground used tires with a straight run binder at high temperatures during a period of time named as digestion time. This is one of many variables that influence the physical properties of asphalt rubber produced by wet process. Thus, the objective of this paper is to evaluate how many mechanical properties of gap-graded hot mixes produced with asphalt rubber binder are influenced by the digestion time used to produce this...

  17. Evaluation of Thermal Oxidative Aging Effect on the Rheological Performance of Modified Asphalt Binders

    Science.gov (United States)

    Zhu, Cheng

    Modified asphalt binder, which is combined by base binder and additive modifier, has been implemented in pavement industry for more than 30 years. Recently, the oxidative aging mechanism of asphalt binder has been studied for several decades, and appreciable finding results of asphalt binder aging mechanism were achieved from the chemistry and rheological performance aspects. However, most of these studies were conducted with neat binders, the research of aging mechanism of modified asphalt binder was limited. Nowadays, it is still highly necessary to clarify how the asphalt binder aging happens with the modified asphalt binder, what is the effect of the different modifiers (additives) on the binder aging process, how the rheological performance changes under the thermal oxidative aging conditions and so on. The objective of this study was to investigate the effect of isothermal oxidative aging conditions on the rheological performance change of the modified and controlled asphalt binders. There were totally 14 different sorts of asphalt binders had been aged in the PAV pans in the air-force drafted ovens at 50°C, 60°C and 85°C for 0.5 day to 240 days. The Fourier-Transform Infrared Spectroscopy (FT-IR) and Dynamic Shear Rheometer (DSR) were used to perform the experiments. The analysis of rheological indices (Low shear viscosity-LSV, Crossover modulus-G*c, Glover-Rowe Parameter-G-R, DSR function-DSR Fn) as a function of carbonyl area (CA) was conducted. With the SBS modification, both of the hardening susceptibility of the rheological index-LSV and G-R decreases compared with the corresponding base binder. The TR increased the hardening susceptibility of all the rheological indexes. While for the G*c, SBS increases the slope of the most modified asphalt binders except A and B_TR_X series binders. The multiple linear regression statistical analysis results indicate that the oxidative aging conditions play an important role on the CA, and rheological performance

  18. About the sizes of elastomer particles in the asphalt concrete binder providing the maximum service life of pavements

    Science.gov (United States)

    Kaplan, A. M.; Chekunaev, N. I.

    2014-05-01

    It is noted that the durability of asphalt concrete pavements is determined by the time of the trunk cracks formation in the polymer-containing composites - in the modified by elastomers (e.g., by rubber) bitumenous binder of asphalt. Developed by the authors previously the theory of the cracks propagation in heterosystems [1] has allowed to investigate the problem of the cracks propagation in the rubber-bitumen composite. This investigations show that most effectively to prevente the trunk cracks formation in asphalt concrete can ultrafine rubber particles (150-750 nm) in a bitumenos binder of asphalt.

  19. Performance of the heavy fraction of pyrolysis oil derived from waste printed circuit boards in modifying asphalt.

    Science.gov (United States)

    Yang, Fan; Sun, Shuiyu; Zhong, Sheng; Li, Shenyong; Wang, Yi; Wu, Jiaqi

    2013-09-15

    The focus of this research was the development of efficient and affordable asphalt modifiers. Pyrolysis oil was produced as a byproduct from the pyrolysis of waste printed circuit boards (WPCBs). The high boiling point fraction was separated from the pyrolysis oil through distillation and is referred to as the heavy fraction of pyrolysis oil (HFPO). The HFPO was tested as an asphalt modifier. Three asphalt modifiers were tested: HFPO; styrene-butadiene rubber (SBR); and HFPO + SBR (1:1). The physical properties and road performance of the three modified asphalts were measured and evaluated. The results have shown that when the amount of modifier was less than 10%, the HFPO modified asphalt had the highest softening point of the three. The dynamic stability (DS) and water resistance of the asphalt mixture with the HFPO modified asphalt was 10,161 cycles/mm and 87.2%, respectively. The DS was much larger than for the HFPO + SBR and SBR modified asphalt mixtures. These results indicate that using HFPO as an asphalt modifier has significant benefits not only for road engineering but also for resource recycling. PMID:23644664

  20. Nuclear method for determination of asphalt content corrected for moisture in bituminous mixture. Final report, March 1988-February 1989

    International Nuclear Information System (INIS)

    This report presents results of research on the development of a method for determination of asphalt content corrected for moisture using the nuclear-gauge method. The researchers selected an approach that involved rapid drying of the asphalt concrete samples in a microwave oven prior to the determination of asphalt content using a Troxler Model 3241-C nuclear asphalt-content gauge. As a reference, asphalt contents were also measured using quantitative extraction. In general, good agreement was found between asphalt contents measured by the Troxler Model 3241-C nuclear gauge and asphalt contents measured by quantitative extraction. In extended sampling for Plant 1, no significant increase in nuclear gauge error was seen over a 10-day sampling period, which indicates that daily calibration of the nuclear gauge is probably unnecessary to maintain satisfactory performance. The field demonstration of the procedure of drying the bituminous mixture in a microwave oven and then determining its asphalt content by the nuclear method indicated asphalt-content results were obtained approximately 1 hour faster than results obtained by quantitative extraction

  1. State-of-the art guideline manual for design, quality control and construction of Sulfur-Extended-Asphalt (SEA) pavements

    Science.gov (United States)

    McBee, W. C.; Sullivan, T. A.; Izatt, J. O.

    1980-08-01

    Sulfur-Extended-Asphalt (SEA) binders save asphalt, a potential energy source, by replacing some asphalt in conventional flexible pavement mixes with sulfur. These new binders appear to possess properties comparable to asphalt. The guideline manual discussed provides the highway community in both public and private organizations with the most definitive state-of-the-art guidelines extant for using these binders. Information on design, construction, quality control, equipment, mixing plants, specifications, and safety is included. Administrators and professionals in pavement construction, design, maintenance, and materials testing will be the personnel who are most interested in the manual.

  2. Effect of Crumb Rubber and Warm Mix Additives on Asphalt Aging, Rheological, and Failure Properties

    Science.gov (United States)

    Agrawal, Prashant

    Asphalt-rubber mixtures have been shown to have useful properties with respect to distresses observed in asphalt concrete pavements. The most notable change in properties is a large increase in viscosity and improved low-temperature cracking resistance. Warm mix additives can lower production and compaction temperatures. Lower temperatures reduce harmful emissions and lower energy consumption, and thus provide environmental benefits and cut costs. In this study, the effects of crumb rubber modification on various asphalts such as California Valley, Boscan, Alaska North Slope, Laguna and Cold Lake were also studied. The materials used for warm mix modification were obtained from various commercial sources. The RAF binder was produced by Imperial Oil in their Nanticoke, Ontario, refinery on Lake Erie. A second commercial PG 52-34 (hereafter denoted as NER) was obtained/sampled during the construction of a northern Ontario MTO contract. Some regular tests such as Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR), Multiple Stress Creep Recovery (MSCR) and some modified new protocols such as the extended BBR test (LS-308) and the Double-Edge Notched Tension (DENT) test (LS-299) are used to study, the effect of warm mix and a host of other additives on rheological, aging and failure properties. A comparison in the properties of RAF and NER asphalts has also been made as RAF is good quality asphalt and NER is bad quality asphalt. From the studies the effect of additives on chemical and physical hardening tendencies was found to be significant. The asphalt samples tested in this study showed a range of tendencies for chemical and physical hardening.

  3. Dermal exposure and urinary 1-hydroxypyrene among asphalt roofing workers.

    Science.gov (United States)

    McClean, M D; Rinehart, R D; Sapkota, A; Cavallari, J M; Herrick, R F

    2007-01-01

    The primary objective of this study was to identify significant determinants of dermal exposure to polycyclic aromatic compounds (PACs) among asphalt roofing workers and use urinary 1-hydroxyprene (1-OHP) measurements to evaluate the effect of dermal exposure on total absorbed dose. The study population included 26 asphalt roofing workers who performed three primary tasks: tearing off old roofs (tear-off), putting down new roofs (put-down), and operating the kettle at ground level (kettle). During multiple consecutive work shifts (90 workerdays), dermal patch samples were collected from the underside of each worker's wrists and were analyzed for PACs, pyrene, and benzo(a)pyrene (BAP). During the same work week, urine samples were collected at pre-shift, post-shift, and bedtime each day and were analyzed for 1-OHP (205 urine samples). Linear mixed effects models were used to evaluate the dermal measurements for the purpose of identifying important determinants of exposure, and to evaluate urinary 1-OHP measurements for the purpose of identifying important determinants of total absorbed dose. Dermal exposures to PAC, pyrene, and BAP were found to vary significantly by roofing task (tear-off > put-down > kettle) and by the presence of an old coal tar pitch roof (pitch > no pitch). For each of the three analytes, the adjusted mean dermal exposures associated with tear-off (812 ng PAC/cm2, 14.9 ng pyrene/cm2, 4.5 ng BAP/cm2) were approximately four times higher than exposures associated with operating the kettle (181 ng PAC/cm2, 4.1 ng pyrene/cm2, 1.1 ng BAP/cm2). Exposure to coal tar pitch was associated with a 6-fold increase in PAC exposure (p = 0.0005), an 8-fold increase in pyrene exposure (p pitch roof was removed, accounting for a 3.7-fold difference at pre-shift (p = 0.01), a 5.0-fold difference at post-shift (p = 0.004), and a 7.2-fold difference at bedtime (p = 0.002). The pyrene measurements obtained during the work shift were found to be strongly correlated

  4. 橡胶沥青的改性机理%Rubber asphalt modification mechanism

    Institute of Scientific and Technical Information of China (English)

    王笑风; 曹荣吉

    2011-01-01

    In light of the complexity of rubber asphalt modification mechanism, such means as scanning electron microscopy, infrared spectroscopy, differential thermal analysis, microscopic structure analysis, component analysis were adopted to study the components of the asphalt before and after modifying, and chemical analysis of rubber powder are adopted to study the modification mechanism of asphalt rubber blending system. The results indicate that the swollen rubber powder is mutually-adhered to form a network structure, and the matrix asphalt changes from homogeneous body into a two-phase continuous blending structure system constituted by rubber powder and asphalt; physical swelling dominates the system, accompanied by a little chemical reaction and with the prolongation of time, the chemical reaction becomes more obvious; the swollen rubber powder forms damping effects to improve the viscosity of rubber asphalt. The modification of asphalt comes from two aspects: firstly, the network structure formed by swollen rubber powder; secondly, the modification of the asphalt composition resulting from rubber powder desulphurization degradation. The natural rubber has better performance in modifying asphalt than synthetic rubber. 4 tabs, 9 figs. 12 refs.%针对橡胶沥青改性机理的复杂性,采用扫描电镜、红外光谱、差热分析、微观结构分析、组分分析及胶粉化学分析等方法,研究了橡胶沥青混溶体系的改性机理.结果表明:胶粉溶胀后互相粘连,形成网络结构,基质沥青由匀质体变成了胶粉和沥青构成的两相连续共混结构体系;胶粉与基质沥青间以物理溶胀为主,但存在弱化学反应,且随时间延长,化学反应越明显;溶胀胶粉形成阻尼作用,提高了橡胶沥青粘度;沥青的改性源于溶胀胶粉构成的网络结构和胶粉脱硫降解对沥青组分的改善作用;天然橡胶对沥青的改性效果优于合成橡胶.

  5. Impact of road petroleum asphalt heating mode upon asphalt performance%道路石油沥青加热方法对沥青性能的影响

    Institute of Scientific and Technical Information of China (English)

    王萍

    2016-01-01

    The thesis analyzes road petroleum asphalt heating property change,explores the impact of different heating modes upon asphalt,stud-ies suitable asphalt heating modes,and finally points out that:it is necessary to select correct asphalt heating modes in manufacture,transporta-tion,construction and detection process in order to guarantees asphalt servicing performance.%分析了道路石油沥青加热后产生的性质变化,探讨了不同加热方式对沥青产生的影响,并研究了适宜沥青加热的方式,指出为保证沥青的使用性能,在制造、运输、施工、检测等过程中,都应选择正确的沥青加热方式。

  6. Solar-reflective coating as a cooling overlay for asphalt pavement

    Science.gov (United States)

    Wang, He; Xu, Geng; Feng, Decheng; Zhong, Jing; Xie, Ning

    2012-04-01

    Rutting is one of the most serious problems on asphalt pavements. Decrease the surface temperature of the asphalt pavement is an effective method to solve the rutting problem on asphalt pavements. In this study, nano sized particles filled polymer composite was developed as an overlay to reflect the solar energy and decrease the surface temperature of asphalt pavements. The overlay was composed of acrylic or epoxy resin filled with nano TiO2 or nano TiNO2. The solar reflection of the nano particle filled polymers was tested and the results showed that solar reflection effectiveness of the epoxy/TiO2 composite reached the highest value. The results of outdoor temperature test indicate that the solar-reflective overlay could decrease the surface temperature of asphalt pavements about 10 °C when the pavement temperature is about 60 °C. Pavement skid resistance was also tested, which expressed by micro/macrotexture depth and the results of which showed that both matrix was qualified after coated with aggregates on the surface.

  7. The Effects of Salt on Rheological Properties of Asphalt after Long-Term Aging

    Directory of Open Access Journals (Sweden)

    Xin Yu

    2013-01-01

    Full Text Available Limited studies in recent years have shown that asphalt pavement subject to seawater in coastal regions or deicing salt in cold regions may be seriously damaged after being soaked in saline water for a long time. However, there is limited research into the influence of salt on rheological properties of asphalt after long-term aging. In this study, rheological properties of unmodified and polymer-modified asphalt after long-term aging were tested after being soaked in different concentrations of salt (0.3%~5% for different durations (1 day~30 days. Orthogonal array based on the Taguchi method was used for experimental design. The frequency sweep tests were performed on the specimens of aged asphalt after being soaked for complex modulus and phase angle master curves and ultimate fatigue temperature. BBR tests were performed for stiffness. The test results indicate that saline water appears to reduce low temperature properties and fatigue resistance properties and improved high temperature properties of aged asphalt, and it also affects the sensitivity of complex modulus and phase angles at low frequencies.

  8. The effects of the chemical and radiolytic degradation of asphalt on plutonium solubility

    International Nuclear Information System (INIS)

    The influence of alkaline degradation or radiolytic degradation of asphalt on plutonium solubility has been investigated. Asphalt has been contacted with water, sodium hydroxide solution or concrete leachate at 80 C for periods of up to approximately 2 years. Sodium nitrate was also present in some of the experiments. Plutonium solubilities were measured at pH 12 in the leachates and found to be less than 10-8 mol/dm3 for most degradations. Relatively low levels of Total Organic Carbon were measured in the leachates. Alpha radiolysis of asphalt in the presence of concrete and water has also been studied. Samples of asphalt were encapsulated in concrete after coating with the 238PuO2, crushed and leached at room temperature. The solubility of plutonium was measured in samples of the leachates after approximately 90 days and 180 days had elapsed. The results showed that the solubility of plutonium in the α-radiolysis leachates remained low and was in the range 2 x 10-11 to 8 x 10-9 mol/dm3. A consideration of these results, and data published elsewhere, suggests that chemical and radiolytic attack on asphalt or bitumen under anaerobic, alkaline conditions typical of a deep cementitious repository is unlikely to generate complexants for plutonium which are effective at high pH. Any enhancement of plutonium solubility is likely to be less significant than that arising from the degradation of some other organic materials

  9. A feasibility study to use coal tar contaminated soil in asphalt cement mixture production

    International Nuclear Information System (INIS)

    Coal tars are the residues produced during the gasification of coal. Traditionally, coal tars were buried onsite at the power plants or left as residuals in the bottom of gas holders. Currently, there are more than 1,500 such historic sites which will undergo site assessment in the near future. The use of coal tar residuals in asphalt-based products could result in greatly reduced disposal costs, in comparison to current methods of disposal. Present disposal practice of coal tar contaminated residuals includes disposal in hazardous waste landfills or incineration. Treatment and disposal costs are reported to be as much as $1,000/ton for current coal tar contaminated residuals disposal options. This feasibility study was performed to determine the use of coal tar contaminated soil (CTCS) in bituminous materials to produce hot asphalt mix. Mixtures of varying composition of CTCS and bituminous material were produced to perform TCLP. The air emissions during the mixing process were captured and analyzed. In this study, a bench scale investigation was performed to identify and quantify the emissions from heating the CTCS at the mixer temperature. The pilot scale investigations were performed by replacing reclaimable asphalt pavement (RAP) with CTCS during the hot asphalt mix production. The investigations were performed on two types of mixtures; using CTCS as the direct additive in the first type, and using SS-1 (slow setting asphalt emulsion) stabilized CTCS as an additive in the second type

  10. Evaluation of soluble organic compounds generated by radiological degradation of asphalt

    International Nuclear Information System (INIS)

    The soluble organic compounds generated by radiological degradation of asphalt (γ ray) were confirmed as a part of influence of the bituminized waste degradation in the TRU waste repository. Especially, the influence of the nitrate was focused on. As a result, the concentration of the soluble organic compounds generated by radiological degradation of asphalt (10 MGy, γ ray which is correspond to absorbed dose of asphalt for 1,000,000 years) were lower (each formic acid: about 50 mg/dm3, acetic acid: about 30 mg/dm3 and oxalic acid: about 2 mg/dm3) than that of the formic acid, the acetic acid and the oxalic acid which Valcke et al. had shown (the influence of the organic at the solubility examination which uses Pu and Am). Moreover, the change in the concentration of TOC and the soluble organic compounds (formic acid, acetic acid and oxalic acid) is little under the existence of nitrate ion. That is, the formic acid and acetic acid which can be organic ligands were generated little by oxidative decomposition of asphalt in the process that nitrate ion becomes nitride ion by radiation. The influence of the soluble organic compounds by the radiological degradation of the asphalt (γ ray) on adsorption and solubility by the complexation of radionuclides in the performance assessment can be limited. (author)

  11. Evaluation of an eastern shale oil residue as an asphalt additive

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, K.P.; Harnsberger, P.M.

    1995-12-19

    An evaluation of eastern shale oil (ESO) residue as an asphalt additive to reduce oxidative age-hardening and moisture susceptibility was conducted. The ESO residue, having a viscosity of 23.9 Pa{sm_bullet}s at 60{degrees}C (140{degrees}F), was blended with three different petroleum-derived asphalts, AAD-1, AAK-1, and AAM-1, that are known to be very susceptible to oxidative aging. Rheological and infrared analyses of the unaged and aged asphalts and the blends were then conducted to evaluate oxidative age-hardening. In addition, the petroleum-derived asphalts and the blends were coated onto three different aggregates, Lithonia granite (RA), a low-absorption limestone (RD), and a silicious Gulf Coast gravel (RL), and compacted into briquets. Successive freeze-thaw cycling was then conducted to evaluate the moisture susceptibility of the prepared briquets. The abbreviations used above for the asphalts and the aggregates are part of the Strategic Highway Research Program nomenclature.

  12. Development of superior asphalt recycling agents. Phase 1, Technical feasibility. Final technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bullin, J.A.; Davison, R.R.; Glover, C.J.; Chaffin, J.; Liu, M.; Madrid, R.

    1997-07-01

    After an introduction and a literature survey in Chap. 1, Chap. 2 describes the tasks, together with objectives and important results obtained for each task throughout the entire project. Chaps. 3 thru 7 detail work in developing a qualitative and quantitative knowledge of asphalt oxidation, composition dependence of asphalt properties, and guidelines for producing superior asphalt binders through composition control. They also detail the development of a kinetic model for asphalt oxidative aging and present an understanding of the composition dependence of asphalt oxidation as well as other performance-related properties. Chaps. 8 and 9 compare the aging performance of recycled blends produced using commercial recycling agents and industrial supercritical fractions as rejuvenating agents. Oxidative aging of the recycled blends were evaluated along with the performance of the recycled blends in terms of the strategic highway research program performance grading procedure. Chap. 10 summarizes the work completed in the areas of processing schemes development, projection updates, and scale-up and commercialization plans.

  13. New Asphalt Pavement Failure Criterion Based on Unifi ed Strength Theory

    Institute of Scientific and Technical Information of China (English)

    YANG Qun; CHEN Lu; WANG Ping; DAI Jingwang

    2015-01-01

    This study aims to introduce an appropriate analytical method for asphalt pavement based upon unified strength theory (UST). The traditional maximum shear stress strength theory (MSST) cannot describe the marked difference between tension strength and compressive strength or variable intermediate principal stress, which significantly affects the geotechnical materials. Our studies try to find a new asphalt pavement failure criterion that considers the influence of both tension-compression strength ratio and intermediate principal stress of asphalt mixture. In order to select a suitable theory on pavement material, the UST is introduced and compared with the traditional theory. Results show that the tension-compression strength ratio of asphalt mixture, which is used as a material parameter, dramatically affects the stress and stress distribution law in pavement; the pavement stress level increases dramatically after considering the intermediate principal stresses. Therefore, the UST which considers both tension-compression strength ratio and intermediate principal stress is more in line with the material characteristics of asphalt pavement.

  14. Assessment of dynamic modulus of high density polypropylene waste fiber reinforcement in asphalt concrete

    Directory of Open Access Journals (Sweden)

    Hassan S. OTUOZE

    2015-12-01

    Full Text Available Traditional asphalt tests like Hveem and Marshall tests are at best mere characterization than effective test of pavement field performance because of complex viscoelastic behavior of asphalt. Mechanical properties otherwise called simple performance tests (SPT are performance criteria of asphalt. Dynamic modulus among other SPT’s like permanent deformation, fatigue cracking, thermal cracking, moisture susceptibility, shear and friction properties; determines stress-strain to time-temperature relationships that imparts on strength, service life and durability. The test followed the recommendations of NCHRP 1-37a (2004 and mixes were prepared using 0, 0.5, 1.0 and 1.5% HDPP contents. The parameters tested for dynamic modulus, /E*/, are stiffness, recoverable strain (ε, and phase angle (ξ. Time – temperature superposition (TTS called master curve was fitted using sigmoidal curve to interpolate the parameters beyond measured data set so as to observe the viscoelastic behavior outside the physical properties. The performance of 0.5% HDPP asphalt is better enhanced than the conventional asphalt to improve upon strength, service and durability.

  15. Modelling and Laboratory Studies on the Adhesion Fatigue Performance for Thin-Film Asphalt and Aggregate System

    Directory of Open Access Journals (Sweden)

    Dongsheng Wang

    2014-01-01

    Full Text Available Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the adhesion fatigue performance were also investigated. Experiment results show that asphalt has more important effect on the adhesion performance comparing with aggregate. Basalt, which is regarded as hydrophobic aggregates with low silica content, has better adhesion performance to asphalt binder when compared with granite. The effects of aging on the adhesion fatigue performance are different for PG64-22 and rubber asphalt. Long-term aging is found to reduce the adhesion fatigue lives for rubber asphalt and aggregate system, while the effect of long-term aging for aggregate and PG64-22 binder system is positive. Generally the increased stress amplitude and test temperature could induce greater damage and lead to less fatigue lives for adhesion test system.

  16. Modelling and laboratory studies on the adhesion fatigue performance for thin-film asphalt and aggregate system.

    Science.gov (United States)

    Wang, Dongsheng; Yi, Junyan; Feng, Decheng

    2014-01-01

    Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the adhesion fatigue performance were also investigated. Experiment results show that asphalt has more important effect on the adhesion performance comparing with aggregate. Basalt, which is regarded as hydrophobic aggregates with low silica content, has better adhesion performance to asphalt binder when compared with granite. The effects of aging on the adhesion fatigue performance are different for PG64-22 and rubber asphalt. Long-term aging is found to reduce the adhesion fatigue lives for rubber asphalt and aggregate system, while the effect of long-term aging for aggregate and PG64-22 binder system is positive. Generally the increased stress amplitude and test temperature could induce greater damage and lead to less fatigue lives for adhesion test system. PMID:25054187

  17. 沥青路面施工技术浅谈%On construction technology of asphalt pavement

    Institute of Scientific and Technical Information of China (English)

    李伟勇

    2009-01-01

    Combined with wide application of asphalt pavement the reasons caused the premature failure of asphalt pavement axe analyzed, at the same time corresponding key points for asphalt pavement construction are presented. Meanwhile, technological research and innovation prospect of asphalt pavement are elaborated, in order to increase construction quality and prolong the service life of asphalt pavement to ensure investment benefits.%结合沥青路面的广泛应用,分析了沥青路面早期损害形成的原因,提出了沥青路面施工要领,阐述了沥青路面的技术研究和创新前景,以提高沥青路面的质量,延长沥青路面的使用周期,从而提高投资效益.

  18. State-of-the-art guideline manual for design, quality control, and construction of sulfur-extended-asphalt (SEA) pavements

    Energy Technology Data Exchange (ETDEWEB)

    McBee, W.C.; Sullivan, T.A.; Izatt, J.O.

    1980-01-01

    Interest in the use of sulfur in highway pavement construction has been stimulated by unpredictable increases in cost and the relative uncertainty as to the future availability of asphalt cement (A/C) along with the potential surplus of sulfur in the near future. These events have led to the development of a new binder: a sulfur-extended-asphalt (SEA) binder. This new binder replaces some of the asphalt with sulfur in conventional asphalt paving plants. The mix material can be transported, laid, and compacted with standard paving equipment. Studies of SEA pavements indicate that their properties are comparable and in some cases may prove to be superior to those of conventional asphalt pavements. The manual presents state-of-the-art guidelines for design, quality control, safety factors, and construction of these newly developed pavements. A nonproprietary, direct mixing method and four proprietary methods of producing the SEA mixtures are described.

  19. Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method

    DEFF Research Database (Denmark)

    Feng, Huan; Pettinari, Matteo; Stang, Henrik

    2015-01-01

    In this paper, the viscoelastic behavior of asphalt mixture was studied by using discrete element method. The dynamic properties of asphalt mixture were captured by implementing Burger’s contact model. Different ways of taking into account of the normal and shear material properties of asphalt...... direction, respectively; while for Model II, the same calibrated parameters in the normal direction were used, but the values for the shear direction were chosen to be equal with the normal direction. The complex modulus of asphalt mixtures were predicted for both optimized models by conducting DE...... simulation under dynamic strain control loading. A sensitivity study was carried out, where the effects of different design parameters on the dynamic properties of asphalt mixture has been investigated, including the eight parameters of Burger’s model and the friction coefficient....

  20. Effect of Carbon Nanofiber on Mechanical Behavior of Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Saeed Ghaffarpour Jahromi

    2015-09-01

    Full Text Available Uses of fibers to improve material properties have a scientific background in recent years in civil engineering. Use of Nanofiber reinforcement of materials refers to incorporating materials with desired properties within some other materials lacking those properties. Use of fibers for improvement is not a new phenomenon as the technique of fiber-reinforced bitumen began as early as 1950, but using nanofiber is a new idea. In this research the mechanical properties of asphalt mixture that have been modified with carbon nanofiber were investigated using mechanical tests, which can improve the performance of flexible pavements. To evaluate the effect of nanofiber contents on bituminous mixtures, laboratory investigations were carried out on the samples with and without nanofibers. During the course of this study, various tests were undertaken applying the Marshall test, indirect tensile test, resistance to fatigue cracking by using repeated load indirect tensile test and creep test. Carbon nanofiber exhibited consistency in results and it was observed that the addition of nanofiber can change the properties of bituminous mixtures, increase its stability and decrease the flow value. Results indicate that nanofiber have the potential to resist structural distress in the pavement and thus improve fatigue by increasing resistance to cracks or permanent deformation, when growing traffic loads. On the whole, the results show that the addition of carbon nanofiber will improve some of the mechanical properties such as fatigue and deformation in the flexible pavement.

  1. The Use of Coal Bottom Ash In Hot Mix Asphalt

    Directory of Open Access Journals (Sweden)

    Charles Begyina Kodjo Nketsiah

    2015-05-01

    Full Text Available Bottom ash is a waste material from coal burnt to generate electric power. It is incombustible and non-biodegradable; hence, the best way to dispose it is by recycling rather than incineration and land filling. Past research on bottom ash in road building have focused mainly on embankment filling, sub-base and base courses; except boiler slag which has received much attention in Hot Mix Asphalt (HMA. Bottom ash from Tanjung Bin Power Station was thus investigated through laboratory testing to justify its use in HMA construction in Malaysia. This Paper analysed the data with regards to performance in HMA. In the Marshall Mix design, the material largely satisfied the Stability, Flow and Stiffness requirements which were comparable to that of conventional aggregates, although void contents were a bit higher. When blended with granite, all the parameters were met. Contrary to past suggestions that bottom ash in HMA consumes more bitumen, the 6.4% (51.20g Optimum Bitumen Content (OBC achieved in this study does not necessarily translate into high consumption, compared to OBC of 5.3% (59.63g in the case of granite. The HMA also proved to be highly resistant to moisture-induced damage and satisfied the minimum JKR specification for Static Uniaxial Load Strain.

  2. Utilization of Recycled Concrete Aggregates in Stone Mastic Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Mohammad Saeed Pourtahmasb

    2014-01-01

    Full Text Available Recycled concrete aggregate (RCA is considered as one of the largest wastes in the entire world which is produced by demolishing concrete structures such as buildings, bridges, and dams. It is the intention of scientists and researchers, as well as people in authority, to explore waste material recycling for environmental and economic advantages. The current paper presents an experimental research on the feasibility of reusing RCA in stone mastic asphalt (SMA mixtures as a partial replacement of coarse and fine aggregates. The engineering properties of SMA mixtures containing RCA have been evaluated for different percentages of binders based on the Marshall mix design method. The outcomes were statistically analyzed using two-factor analysis of variance (ANOVA. Test results revealed that the performance of SMA mixtures is affected by RCA due to higher porosity and absorption of RCA in comparison with virgin granite aggregates. However, the engineering properties of SMA mixtures containing a particular amount of RCA showed the acceptable trends and could satisfy the standard requirements. Moreover, to achieve desirable performance characteristics, more caution should be made on properties of SMA mixtures containing RCA.

  3. Mathematical Approach in Rheological Characterizing of Asphalt Emulsion Residues

    Directory of Open Access Journals (Sweden)

    Seong Hwan Cho

    2015-01-01

    Full Text Available Three different emulsion residues, such as SS1HP, HFE90, and SS-1VH (trackless, and a base asphalt binder (PG 64-22 are compared to characterize rheological properties by using DSR test. In order to capture the emulsion properties, different frequencies (from 1 to 100 rad/sec at a 10% constant shear rate and temperatures (from −45°C to 75°C with 15°C increments were applied. Then, a master curve for shear modulus was plotted for each emulsion. The transition of the HFE90 emulsion from viscous to elastic behavior occurs at lower temperatures, compared to the other materials. This emulsion is known for performing in a wider temperature range as shown in the results. The trackless emulsion presents an elastic behavior at intermediate temperatures. This product is known as having very fast setting and high resistance to shear stresses. The trackless emulsion presents the highest viscous and elastic modulus, followed by the PG 64-22 binder, SS1HP, and HFE90 emulsion. Shear strength test results show a behavior between trackless emulsion and SS1HP similar to the frequency sweep test results performed by DSR.

  4. Asphalt emulsion radon barrier systems for uranium mill tailings: an overview of the technology

    International Nuclear Information System (INIS)

    Pacific Northwest Laboratory (PNL), under contract to the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP) office, has developed an asphalt emulsion cover system to reduce the release of radon from uranium mill tailings. The system has been field tested at Grand Junction, Colorado. Results from laboratory and field tests indicate that this system is effective in reducing radon release to near-background levels (-2s-1) and has the properties required for long-term effectiveness and stability. Engineering specifications have been developed, and analysis indicates that asphalt emulsion covers are cost-competitive with other cover systems. This report summarizes the technology for asphalt emulsion radon barrier systems. 59 references, 45 figures, 36 tables

  5. Research on segregation evaluation methods of asphalt pavement based on air voids distribution

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Eye observation was used to evaluate the segregation degree of asphalt pavement, which was not much creditable. To the asphalt pavement, road surface texture measuring method which has appeared recently can identify gradational segregation; but it can't reflect the influence of the temperature segregation. However,using infrared temperature detector to evaluate the segregation must be taken during paving, which brings much inconvenience. In this paper, measuring the air voids distribution using non-nuclear density gauge to evaluate asphalt pavement segregation was introduced. Result shows that this method can directly reflect the comprehensive results of the two types of segregation in a high efficient and accurate way. Moreover, using the sketch map of segregation area can help to analyze the segregation reason visually.

  6. Viscoroute 2.0: a tool for the simulation of moving load effects on asphalt pavement

    CERN Document Server

    Chabot, Armelle; Deloffre, Lydie; Duhamel, Denis

    2010-01-01

    As shown by strains measured on full scale experimental aircraft structures, traffic of slow-moving multiple loads leads to asymmetric transverse strains that can be higher than longitudinal strains at the bottom of asphalt pavement layers. To analyze this effect, a model and a software called ViscoRoute have been developed. In these tools, the structure is represented by a multilayered half-space, the thermo-viscoelastic behaviour of asphalt layers is accounted by the Huet-Sayegh rheological law and loads are assumed to move at constant speed. First, the paper presents a comparison of results obtained with ViscoRoute to results stemming from the specialized literature. For thick asphalt pavement and several configurations of moving loads, other ViscoRoute simulations confirm that it is necessary to incorporate viscoelastic effects in the modelling to well predict the pavement behaviour and to anticipate possible damages in the structure.

  7. NMR analysis of cracking products of asphalt and assessment of catalyst performance

    International Nuclear Information System (INIS)

    This paper reports 13C nuclear magnetic resonance (NMR) analysis of some crackates obtained from asphalt cracking in a micro autoclave under a pool of nitrogen. The cracking was carried out in the presence of Zeolite Socony Mobil no. 5 (HZSM-5) and locally cheap and readily available clay i.e. Utimanzai Clay (UTIMAC) as catalysts. The crackates obtained in case of each run was analyzed by 13C NMR spectrophotometer using CDCl3 as dissolving solvent and tetramethyl silane (TMS) as internal standard. The 13C NMR data was used to assess the extent of hydrocracking and degree of branching in crackates from asphalt .The results indicate that the cheap local catalyst used has comparable suitability with the conventional expensive catalyst in terms of asphalt cracking and its conversion to light products enriched with bulk n-alkane configurations

  8. Solidification of aqueous tritium-containing wastes with calcium oxide and asphalt

    International Nuclear Information System (INIS)

    A simple method is proposed for solidifying aqueous tritium-containing wastes with calcium oxide and asphalt. We incorporated tritiated calcium hydroxide into molten asphalt at 100-210/degree/C and studied the evolution of tritium (T) oxides there from as well as the extent to which calcium and tritium are leached out of the solidified product. Depending on temperature and heating time, the evolution of HTO from a Ca(OH)OT-asphalt mixture was low (between 5.6 x 10/sup /minus/4/ and 5.9 x 10/sup /minus/4/ wt.% of the original amount). Tritium evolution rates and leaching coefficients of tritium and calcium showed the solidified product to have high stability in water. Conclusions were drawn as to the usefulness of the proposed method

  9. A critical assessment of asphalt batching as a viable remedial option for hydrocarbon contaminated soils

    International Nuclear Information System (INIS)

    Hot mix asphalt production equipment has been successfully utilized in the remediation of soils contaminated with petroleum hydrocarbons. This paper reports that there are two major ways in which this equipment can be used to remediate the petroleum contaminated soils; by incorporating the contaminated soil in the hot mix asphalt product or by using the equipment to clean the soil thermally of the contaminant, leaving a clean soil material. Both of these processes have limitations encompassing technical, political, and certainly liability problems. The remediation of contaminated soil in hot mix asphalt facilities is primarily a physical phenomenon relying on laws of heat and mass transfer. Although chemical changes do occur, the primary function of the process is to cause a physical separation of the contaminant from the soils

  10. Non-isothermal kinetics of styrene—butadiene—styrene asphalt combustion

    International Nuclear Information System (INIS)

    The combustion characteristics of styrene—butadiene—styrene (SBS) asphalt are studied by thermogravimetric analysis (TG/DTG) at four different heating rates. According to the saturates/aromatics/resins/asphaltenes (SARA) fractionation method, the combustion process of SBS asphalt can be divided by Gaussian peak fitting into three main stages: oil content release, resin pyrolysis, and asphaltene and char combustion. When the heating rate increases, the mass losses of the oil content and resin pyrolysis increase, and less asphaltenes are formed at a higher temperature. The activation energy values are calculated by the Coats—Redfern method to be in the range 61.6 kJ/mol–142.9 kJ/mol. The Popescu method is used for the kinetic analysis, and the result shows that the three stages of asphalt combustion can be explained by the sphere phase boundary reaction model, the second order chemical reaction model, nucleation, and its subsequent growth model, respectively

  11. An optimized setup for determining the bitumen content in asphalt concrete by the neutron reflection method

    International Nuclear Information System (INIS)

    A setup was developed in order to determine the bitumen content in asphalt concrete by neutron reflection. The main parts of this setup are an Am-Be neutron source of 37 GBq and a 3He neutron detector. To avoid geometrical effects of the measurements, the optimum volume of the samples was determined by plotting the reflected neutron response versus the sample volume. For the calibration of the system, the American Standard Method (ASTM) was used when preparing aggregate and asphalt concrete samples. The method was then compared to the conventional chemical method by analyzing unknown samples taken from an asphalt concrete producing plant and finally the method was assessed in terms of reproducibility, sensitivity and precision. (author)

  12. Research on the Technology Applying Anti-Rutting Additive to Asphalt Mixture

    Science.gov (United States)

    Sun, Jie; Huang, Liming; Li, Chun

    High-temperature problems like rutting, displacement and upheaval are the most serious ones for bituminous pavement of urban roads. Especially, such problems at crossroads and fixed places where buses stop, for instance, BRT, affect service ability and life of roads largely. Application of anti-rutting asphalt mixture mainly aims at reducing strain and deformation generated by bituminous concrete under effect of vehicle load, decreasing remainders that cannot be recovered in deformation, improving the ability of bituminous pavement to resist deformation under high temperature and delaying generation of rutting. Anti-rutting asphalt mixture in this thesis refers to the asphalt mixture where anti-rutting additive is added by dry method and high-temperature stability is improved.

  13. Use of asphalt emulsion sealants in disposal of uranium mill tailings

    International Nuclear Information System (INIS)

    Studies of asphalt emulsion sealants conducted by the Pacific Northwest Laboratory have demonstrated that the sealants are effective in containing radon within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to near background levels. Field tests at the tailings pile in Grand Junction, Colorado confirmed that an 8-cm admix seal containing 22 wt % asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and compacted, overburden was applied over the seal to protect the seal from ultraviolet degradation

  14. Development of incorporation of evaporator concentrate from pressurized water nuclear power reactors into asphalt

    International Nuclear Information System (INIS)

    The paper presents a summary of recent progress in the bituminization technique of evaporator concentrate from a pressurized light-water reactor. The research and development work has been carried out for the past three years at Korea Atomic Energy Research Institute. A new approach to incorporation of the concentrate into the mixed asphalt of a straight asphalt and a blown asphalt has been studied. Before feeding the concentrate into a thin-film evaporator, it is neutralized with sodium hydroxide in the range of pH 7.5 to 8.0. Compared with cement and vermiculite process used at Kori unit 1 (600 MWe, PWR), the bituminization process of the concentrate suggests that there is a gain in volume of minimum five

  15. The shakeout scenario: Meeting the needs for construction aggregates, asphalt, and concrete

    Science.gov (United States)

    Langer, W.H.

    2011-01-01

    An Mw 7.8 earthquake as described in the ShakeOut Scenario would cause significantdamage to buildings and infrastructure. Over 6 million tons of newly mined aggregate would be used for emergency repairs and for reconstruction in the five years following the event. This aggregate would be applied mostly in the form of concrete for buildings and bridges, asphalt or concrete for pavement, and unbound gravel for applications such as base course that goes under highway pavement and backfilling for foundations and pipelines. There are over 450 aggregate, concrete, and asphalt plants in the affected area, some of which would be heavily damaged. Meeting the increased demand for construction materials would require readily available permitted reserves, functioning production facilities, a supply of cement and asphalt, a source of water, gas, and electricity, and a trained workforce. Prudent advance preparations would facilitate a timely emergency response and reconstruction following such an earthquake. ?? 2011, Earthquake Engineering Research Institute.

  16. Analysis of asphalt pavement structural response from an accelerated loading test

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This study was to compare theoretical calculation and practical measurement structure response of asphalt pavement. Analysis of the pavement layer moduli was determined from a Back-calculation of Falling Weight Deflectometer (FWD) data and the measured stiffness moduli of asphalt layer cores. The pavement response was calculated using a theoretical model and the measured strain response at the bottom different layers.Layered elastic theory was used to back-calculate the layer moduli and three different theory models were used to forward calculate the strain and deflection. The models were: Layered Elastic Theory (LET), the Method of Equivalent Thicknesses (MET) with linear elastic and the Finite Element Method (FEM) where asphalt layer may be viscoelastic. The results showed that the calculation structure response from FEM was consistent with measured results.

  17. Asphalt emulsion radon barrier systems for uranium mill tailings: an overview of the technology

    Energy Technology Data Exchange (ETDEWEB)

    Baker, E.G.; Hartley, J.N.; Freeman, H.D.; Gates, T.E.; Nelson, D.A.; Dunning, R.L.

    1984-03-01

    Pacific Northwest Laboratory (PNL), under contract to the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP) office, has developed an asphalt emulsion cover system to reduce the release of radon from uranium mill tailings. The system has been field tested at Grand Junction, Colorado. Results from laboratory and field tests indicate that this system is effective in reducing radon release to near-background levels (<2.5 pCi m/sup -2/s/sup -1/) and has the properties required for long-term effectiveness and stability. Engineering specifications have been developed, and analysis indicates that asphalt emulsion covers are cost-competitive with other cover systems. This report summarizes the technology for asphalt emulsion radon barrier systems. 59 references, 45 figures, 36 tables.

  18. A multiscale model for predicting the viscoelastic properties of asphalt concrete

    Science.gov (United States)

    Garcia Cucalon, Lorena; Rahmani, Eisa; Little, Dallas N.; Allen, David H.

    2016-04-01

    It is well known that the accurate prediction of long term performance of asphalt concrete pavement requires modeling to account for viscoelasticity within the mastic. However, accounting for viscoelasticity can be costly when the material properties are measured at the scale of asphalt concrete. This is due to the fact that the material testing protocols must be performed recursively for each mixture considered for use in the final design. In this paper, a four level multiscale computational micromechanics methodology is utilized to determine the accuracy of micromechanics versus directly measured viscoelastic properties of asphalt concrete pavement. This is accomplished by first measuring the viscoelastic dynamic modulus of asphalt binder, as well as the elastic properties of the constituents, and this comprised the first scale analysis. In the second scale analysis, the finite element method is utilized to predict the effect of mineral fillers on the dynamic modulus. In the third scale analysis, the finite element method is again utilized to predict the effect of fine aggregates on the dynamic modulus. In the fourth and final scale analysis, the finite element method is utilized to predict the effect of large aggregates on the dynamic modulus of asphalt concrete. This final predicted result is then compared to the experimentally measured dynamic modulus of two different asphalt concretes for various volume fractions of the constituents. Results reveal that the errors in predictions are on the order of 60 %, while the ranking of the mixtures was consistent with experimental results. It should be noted that differences between the "final predicted results" and the experimental results can provide fruitful ground for understanding the effect of interactions not considered in the multiscale approach, most importantly, chemical interactions.

  19. Non-linear viscoelastic behavior of polymer modified asphalt (PMA) in the paving industry

    Energy Technology Data Exchange (ETDEWEB)

    Jorshari, K. [Calgary Univ., AB (Canada)

    2000-06-01

    A common practice in the past few years in asphalt technology has been the modification of asphalt binders, most often through the addition of macromolecular materials, like elastomers and plastomers. A wider performance range for the bound pavement materials is the objective behind the addition of polymers to bitumen. This method reduces the accumulation of permanent deformation (rutting), retards fatigue crack initiation and propagation, which in turn is useful in decreasing the life cycle costs of asphalt pavement. The extreme field temperatures experienced in Canada reinforce the use of this procedure. The author initiated a research project aimed at (1) the determination of dynamic mechanical properties of certain polymer modified asphalt used in the filed, (2) the analysis of experimental data acquired through periodic-dynamic true shear test and the characterization of viscoelastic properties at large deformations, and (3) to study the behaviour of different types of modified asphalt binders under the same reduced temperature. The author proceeded by using a sliding plate dynamic shear rheometer used for large amplitude oscillatory shear (LAOS) flow. The maximum pavement design temperature specified in Strategic Highway Research Program (SHRP) binder served as the basis for the temperature reduction, and the results compared with conventional asphalt property. The comparison involved Fourier analysis of the stress response to LAOS. A specific range of transducer was selected for this research. The results indicated that the stress response to oscillatory shear test at LAOS decreases with increasing temperature. Higher stress and mechanical modulus was obtained when the frequency was increased, relating it to the number of vehicles on the road. Raising the frequency by an average of 10 times increases the modulus by one order of magnitude. A higher stress response is a consequence of a higher percentage of polymers. The impact of reduced temperature and non

  20. Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture.

    Science.gov (United States)

    Xue, Yongjie; Wu, Shaopeng; Hou, Haobo; Zha, Jin

    2006-11-16

    Chinese researchers have commenced a great deal of researches on the development of application fields of basic oxygen steel making furnace slag (BOF slag) for many years. Lots of new applications and properties have been found, but few of them in asphalt mixture of road construction engineering. This paper discussed the feasibility of BOF steel slag used as aggregate in asphalt pavement by two points of view including BOF steel slag's physical and micro-properties as well as steel slag asphalt materials and pavement performances. For the former part, this paper mainly concerned the mechanochemistry and physical changes of the steel slag and studied it by performing XRD, SEM, TG and mercury porosimeter analysis and testing method. In the second part, this paper intended to use BOF steel slag as raw material, and design steel slag SMA mixture. By using traditional rutting test, soak wheel track and modified Lottman test, the high temperature stability and water resistance ability were tested. Single axes compression test and indirect tensile test were performed to evaluate the low temperature crack resistance performance and fatigue characteristic. Simultaneously, by observing steel slag SMA pavement which was paved successfully. A follow-up study to evaluate the performance of the experimental pavement confirmed that the experimental pavement was comparable with conventional asphalt pavement, even superior to the later in some aspects. All of above test results and analysis had only one main purpose that this paper validated the opinion that using BOF slag in asphalt concrete is feasible. So this paper suggested that treated and tested steel slag should be used in a more extensive range, especially in asphalt mixture paving projects in such an abundant steel slag resource region. PMID:16982138