WorldWideScience

Sample records for asphalt plants

  1. Modeling Recycling Asphalt Pavement Processing Technologies in Asphalt Mixing Plants

    OpenAIRE

    Simonas Tamaliūnas; Henrikas Sivilevičius

    2011-01-01

    The article presents reclaimed asphalt pavement (RAP) processing technologies and equipment models used in the asphalt mixing plant (AMP). The schematic model indicating all possible ways to process RAP in AMP is shown. The model calculating the needed temperature of mineral materials used for heating RAP is given and an example of such calculation is provided.Article in Lithuanian

  2. Modeling Recycling Asphalt Pavement Processing Technologies in Asphalt Mixing Plants

    Directory of Open Access Journals (Sweden)

    Simonas Tamaliūnas

    2011-04-01

    Full Text Available The article presents reclaimed asphalt pavement (RAP processing technologies and equipment models used in the asphalt mixing plant (AMP. The schematic model indicating all possible ways to process RAP in AMP is shown. The model calculating the needed temperature of mineral materials used for heating RAP is given and an example of such calculation is provided.Article in Lithuanian

  3. Specifications and Construction Methods for Asphalt Concrete and Other Plant-Mix Types, 3rd Edition.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The purpose of this publication is to assist engineers in the analysis, design and control of paving projects that use asphalt concrete and other asphalt plant-mixes. The scope of this new third edition has been enlarged, and changes necessitated by advances in asphalt technology have been incorporated. Chapters I and II and Appendices A and B…

  4. 77 FR 50651 - Approval and Promulgation of Air Quality Implementation Plans; New Hampshire; Hot Mix Asphalt Plants

    Science.gov (United States)

    2012-08-22

    ... Mix Asphalt Plants AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA... Hampshire Hot Mix Asphalt Plant Rule at Env-A 2703.02(a). This rule establishes and requires limitations on visible emissions from all hot mix asphalt plants. This revision is consistent with the maintenance of...

  5. 77 FR 50608 - Approval and Promulgation of Air Quality Implementation Plans; New Hampshire; Hot Mix Asphalt Plants

    Science.gov (United States)

    2012-08-22

    ... Mix Asphalt Plants AGENCY: Environmental Protection Agency (EPA). ACTION: Direct final rule. SUMMARY... 2703.02 for hot mix asphalt plants. This rule establishes and requires limitations on visible emissions from all hot mix asphalt plants. This revision is consistent with the maintenance of all...

  6. Stormwater Pollution Prevention Plan TA-60 Asphalt Batch Plant Revision 2: January 2017

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, Leonard Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-01

    The Stormwater Pollution Prevention Team (PPT) is applicable to operations at the Technical Area (TA)- 60 Asphalt Batch Plant (ABP) located on Eniwetok Drive/Sigma Mesa, in Los Alamos County, New Mexico at Los Alamos National Laboratory (LANL).

  7. Use of Hydrogen from Renewable Energy Source for Powering Hot-Mix Asphalt Plant

    Directory of Open Access Journals (Sweden)

    Kasthurirangan Gopalakrishnan

    2012-03-01

    Full Text Available A significant portion of paved roads and highways are surfaced with Hot-Mix Asphalt. Environmental Life-Cycle Assessment studies have shown that, in the production of Hot-Mix Asphalt pavements, major consumption of energy takes place during asphalt mixing and drying of aggregates, more than what is consumed during the extraction of crude oil and the distillation of bitumen. Currently, natural gas is the primarily source of fossil fuel used to produce 70 to 90 percent of the Hot-Mix Asphalt in the USA, while the remainder of the Hot-Mix Asphalt is produced using oil, propane, waste oil, or other fuels. Energy-related CO2 emissions resulting from the use of fossil fuels in various industry and transportation sectors represent a significant portion of human-made greenhouse gas emissions. This study investigates the technical feasibility of using a hybrid wind energy system as a clean source of energy for operating an entire Hot-Mix Asphalt production facility. Since wind blows intermittently, the extracted wind energy will be stored in the form of hydrogen which is considered a lightweight, compact energy carrier, for later use, thus creating a ready source of electricity for the Hot-Mix Asphalt plant when wind is not present or when electricity demand is high.

  8. Laboratory performance of asphalt rubber mixtures

    OpenAIRE

    Fontes, Liseane; Trichês, Glicério; Pais, Jorge; Pereira, Paulo; Minhoto, Manuel

    2009-01-01

    Asphalt rubber mixtures are one of the most promising techniques to extend the service life of asphalt pavement overlays. Asphalt rubber binder is composed of crumb rubber from reclaimed tires and conventional asphalt. The asphalt rubber binder can be obtained through wet process in two different systems: tire rubber modified asphalt binder (produced at industrial plants) and continuous blending (produced in asphalt plants). This study presents a laboratory evaluation of asphalt rubber mixtur...

  9. Evaluation of plant-produced porous warm-mix asphalt mixture using LEADCAP additive

    Institute of Scientific and Technical Information of China (English)

    KIM Yongjoo; CHO Dongwoo; YANG Sunglin; KIM Yeongmin; KWON Sooahn; HWANG Sungdo

    2013-01-01

    Warm-mix asphalt (WMA) technology was applied for asphalt mixture,plant-produced porous WMA using LEADCAP additive (porous WMA-LEADCAP) test section was built and compacted at 30 ℃lower than porous hot-mix asphalt (porous HMA) test section.Marshall mix designs were conducted for porous WMA-LEADCAP mixture and porous HMA mixture in terms of Marshall stability,Cantabro loss and dynamic stability.The workability,compactablity and surface quality of porous WMA-LEADCAP pavement were investigated,and the engineering properties of plant-produced porous WMA-LEADCAP mixture and plant-produced porous HMA mixture were evaluated based on indirect tensile strength test and dynamic immersion test.Analysis result shows that LEADCAP additive does not affect polymermodified asphalt in terms of penetration,softening point,viscosity,ductility,toughness and tenacity.Porous WMA-LEADCAP pavement has similar field density,permeability and smoothness compared with standard porous HMA pavement.Plant-produced porous WMA-LEADCAP mixture is equivalent to plantproduced porous HMA mixture in indirect tensile strength,toughness and stripping resistance.4 tabs,4 figs,9 refs.

  10. Air quality assessment of benzo(a)pyrene from asphalt plant operation.

    Science.gov (United States)

    Gibson, Nigel; Stewart, Robert; Rankin, Erika

    2012-01-01

    A study has been carried out to assess the contribution of Polycyclic Aromatic Hydrocarbons (PAHs) from asphalt plant operation, utilising Benzo(a)pyrene (BaP) as a marker for PAHs, to the background air concentration around asphalt plants in the UK. The purpose behind this assessment was to determine whether the use of published BaP emission factors based on the US Environmental Protection Agency (EPA) methodology is appropriate in the context of the UK, especially as the EPA methodology does not give BaP emission factors for all activities. The study also aimed to improve the overall understanding of BaP emissions from asphalt plants in the UK, and determine whether site location and operation is likely to influence the contribution of PAHs to ambient air quality. In order to establish whether the use of US EPA emissions factors is appropriate, the study has compared the BaP emissions measured and calculated emissions rates from two UK sites with those estimated using US EPA emission factors. A dispersion modelling exercise was carried out to show the BaP contribution to ambient air around each site. This study showed that, as the US EPA methodology does not provide factors for all emission sources on asphalt plants, their use may give rise to over- or under-estimations, particularly where sources of BaP are temperature dependent. However, the contribution of both the estimated and measured BaP concentrations to environmental concentration were low, averaging about 0.05 ng m(-3) at the boundary of the sites, which is well below the UK BaP assessment threshold of 0.25 ng m(-3). Therefore, BaP concentrations, and hence PAH concentrations, from similar asphalt plant operations are unlikely to contribute negatively to ambient air quality.

  11. DEVELOPMENT OF METHODS IMPROVING INDUSTRIAL SAFETY OF TECHNOLOGICAL PROCESSES IN ASPHALT-CONCRETE PLANT MIXERS

    Directory of Open Access Journals (Sweden)

    I. A. Ivanova

    2010-05-01

    Full Text Available Problem statement. The problem of improvement of industrial safety of technol-ogical processes in mixers of asphalt-concrete plants is considered on the basis of analysis of organic impurities content in incomplete combustion products, and es-timation of efficiency of purification of asphalt-concrete plant emissions in the presence of “wet” flue gas purification system is given.Results and conclusions. It has been found that the efficiency of hydrocarbon fuel burning affects the amount of hydrophobic dust thrown into the atmosphere, and burning of heavy fuel oil is attended by significant incompleteness of fuel combustion, and this is connected with the processes of fuel dispersion and evapo-ration. The optimal measures for efficient combustion and cleaning of hydrophob-ic dust are described.

  12. EVALUASI KINERJA UNIT BISNIS ASPHALT MIXING PLANT PT PRAYOGA PERTAMBANGAN DAN ENERGI

    Directory of Open Access Journals (Sweden)

    Raden Isma Anggraini

    2016-05-01

    Full Text Available Currently, the mining sector is still one of the main sectors driving the economy of Indonesia and is in demand by both indigenous and foreign investors. Asphalt mixing plant business unit (AMP BU is currently the main priority scale of PT Prayoga. The AMP UB excellent performance of PT Prayoga enable itself to be able to contribute to the company's revenue and accelerate development of infrastructure in Bogor. The objectives of the research were to identify key performance indicator (KPI that is applied in the financial and non-financial perspectives as well as to evaluate the performance of UB AMP of PT Prayoga in terms of financial and non-financial aspects based on the vision, mission and strategy of the company. The method used in this research was the balanced scorecard as a management tool to maintain a balance between the financial (financial perspective and non-financial (customer perspective, business processes, learning and growth indicators. The results showed that the KPI applied in the evaluation of the performance of AMP BU of PT Prayoga consists of 19 indicators including 5 KPI of financial perspective, 5 KPI of customer perspective, 5 KPI of business process perspective, and 4 KPI of learning and growth perspective. The assessment results indicate this business unit obtained the performance index of 78.42% included in the criterion of very good or excellent, thus it has shown its best performance according to the vision, mission and strategy of the company.Keywords: balanced scorecard, performance assessment, performance index, KPI, mining

  13. The Asphalt Handbook.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The new and completely revised edition of the Asphalt Handbook, a standard reference work in the field of asphalt technology and construction, summarizes with reference the information contained in other Asphalt Institute technical manuals. Major areas discussed include the following--(1) uses of asphalt, (2) terms relating to asphalt and its…

  14. Sustainable asphalt pavement: Application of slaughterhouse waste oil and fly ash in asphalt binder

    Science.gov (United States)

    Sanchez Ramos, Jorge Luis

    Increasing energy costs, lack of sufficient natural resources and the overwhelming demand for petroleum has stimulated the development of alternative binders to modify or replace petroleum-based asphalt binders. In the United States, the petroleum-based asphalt binder is mainly used to produce the Hot Mix Asphalt (HMA). There are approximately 4000 asphalt plants that make 500 million tons of asphalt binder valued at roughly 3 billion/year. The instability of the world's oil market has pushed oil prices to more than 80 per barrel in 2012, which increased the cost of asphalt binder up to $570 per ton. Therefore, there is a timely need to find alternative sustainable resources to the asphalt binder. This paper investigates the possibility of the partial replacement of the asphalt binder with slaughterhouse waste and/or fly ash. In order to achieve this objective, the asphalt binder is mixed with different percentages of waste oil and/or fly ash. In order to investigate the effect of these additives to the performance of the asphalt binder, a complete performance grade test performed on multiple samples. The results of the performance grade tests are compared with a control sample to observe how the addition of the waste oil and/or fly ash affects the sample. Considering the increasing cost and demand of asphalt, the use of slaughterhouse waste oil and/or fly ash as a partial replacement may result in environmental and monetary improvements in the transportation sector.

  15. Asphalt cement poisoning

    Science.gov (United States)

    ... petroleum material that hardens when it cools. Asphalt cement poisoning occurs when someone swallows asphalt. If hot ... found in: Road paving materials Roofing materials Tile cements Asphalt may also be used for other purposes.

  16. Design and Performance of Hot Mix Asphalts with High Percentages of Reclaimed Asphalt: Approach followed in the Paramix Project

    OpenAIRE

    Pérez, F.; Rodriguez, M; Visscher, J.; Vanelstraete, A.; Bock, L.

    2004-01-01

    The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical savings, while reducing the negative environmental impact. The European research project PARAMIX aims to improve the techniques for hot mix recycling in plant and cold mix in situ recycling, so as to increase the amount of reclaimed asphalt and develop competitive road pavement rehabilitation techniques. This paper deals with the design of hot mix asphalts for the project. The di...

  17. Asphalt World

    OpenAIRE

    Bedwell, Simon A.

    2009-01-01

    'What, in the end, makes advertisement so superior to criticism? Not what the moving red neon sign says - but the fiery pool reflecting it in the asphalt.' Benjamin, One-Way Street 'The parade has nothing to do with women, everything to do with men... Women are simply the scenery onto which men project their narcissistic fantasies.' Mulvey, Visual & Other Pleasures With invested irony, Simon Bedwell makes drip paintings from used advertising posters, in a messy conflation of a...

  18. The Effect of High RAP and High Asphalt Binder Content on the Dynamic Modulus and Fatigue Resistance of Asphalt Concrete

    OpenAIRE

    Tomlinson, Christopher

    2013-01-01

    This thesis investigates the effects of using various percentages of RAP and asphalt binder contents on the dynamic modulus and fatigue resistance of asphalt concrete. Two RAP percentages (20% and 40%) and three binder percentages (plant-mixed, plant-mixed + 0.5%, and plant-mixed + 1.0%) were evaluated. A Superpave gyratory compactor and an asphalt vibratory compactor were used to prepare dynamic modulus samples and fatigue beam samples at 7% air voids. Three replicate samples for each percen...

  19. 浅谈沥青拌和楼使用和维修中应注意的问题%The Notices of Asphalt Mixing Plant in Use and Repair

    Institute of Scientific and Technical Information of China (English)

    张仁勇

    2013-01-01

    随着国家经济的高速发展,我国道路交通设施也在不断改善中。由于沥青混凝土被广泛使用,因此沥青拌和楼这一生产沥青混凝土的设备也在日趋完备。本文指出了沥青拌和楼在工作过程中常见的问题,并对其使用和维修中应注意的问题进行了分析,希望能令沥青拌和楼更加完善。%With the rapid development of the national econo-my, our country road traffic facilities are also improvements in. The asphalt concrete is widely used, so the production equipm-ent of asphalt concrete, the asphalt mixing plant is more and more complete. The paper points out that the asphalt mixing p-lant common problems in work, analyzes issues which should be pay at ention to in the use and repair, hopes can help asphalt mixing building more perfect.

  20. Storm Water General Permit 3 for Rock and Asphalt

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — General permit #3 for storm water discharges associated with industrial activity for Asphalt Plants, Concrete Batch Plants, Rock Crushing Plants and Construction...

  1. Low temperature asphalt mixtures

    OpenAIRE

    Modrijan, Damjan

    2006-01-01

    This thesis presents the problem of manufacturing and building in the asphalt mixtures produced by the classical hot procedure and the possibility of manufacturing low temperature asphalt mixtures.We will see the main advantages of low temperature asphalt mixtures prepared with bitumen with organic addition Sasobit and compare it to the classical asphalt mixtures. The advantages and disadvantages of that are valued in the practical example in the conclusion.

  2. Asphalt in Pavement Maintenance.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    Maintenance methods that can be used equally well in all regions of the country have been developed for the use of asphalt in pavement maintenance. Specific information covering methods, equipment and terminology that applies to the use of asphalt in the maintenance of all types of pavement structures, including shoulders, is provided. In many…

  3. Research on the Application of Plant Mixed Emulsified Asphalt Cold Regeneration Technology in the City Roads%厂拌乳化沥青冷再生技术在城市道路中的应用研究

    Institute of Scientific and Technical Information of China (English)

    马先锋

    2013-01-01

      文章通过对西安市厂拌乳化沥青冷再生配合比设计及西安市学院路厂拌乳化沥清冷再生工程实施方面的叙述,主要介绍了沥青路面厂拌乳化沥青冷再生技术在西安市城市道路中的应用研究。经过项目检测及分析,该技术适用于西安城市道路的修建与养护,可以充分循环利用旧路面回收材料(RAP),消纳建筑垃圾,减少大量新材料的使用和开山取石,具有显著的环保及资源循环利用效益,值得大力推广。%Through the introduction of plant mixed emulsified asphalt cold recycled mixture ratio design plant mixed emulsified asphalt cold regeneration project implementation of xueyuan road in Xi'an, this paper carried out research on the application of asphalt pavement plant mixed emulsified asphalt cold regeneration technology in city roads of Xi'an. After project detection and analysis, the technology can be applied in Xi'an urban road construction and maintenance, can make full use of old pavement recycled materials (RAP), digest construction waste, reduce the use of a large number of new materials, has significant environmental protection and resource recycling benefits, which is worth promoting.

  4. The cogeneration as an alternative of conservation of energy or increased productivity in industrial asphalt plants; A cogeracao como alternativa de conservacao de energia ou aumento da produtividade industrial em usinas de asfalto

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Liodoro de [Universidade Federal de Itajuba (UNIFEI), Santos, SP (Brazil)], Email: mellostopa@pop.com.br; Souza, Marcelo de Oliveira e [Centrais Eletricas Brasileira S.A - ELETROBRAS, Brasilia, DF (Brazil); Mello, Eliane Stopa de

    2006-07-01

    The paper presents a detailed study on the implantation of the combined and simultaneous generation of usable energy (cogeneration) in industrial units that provide support for the flow of wealth to the country, across roads and highways, as is the case of plant Asphalt EMPAV. The study, by the sensitivity analysis of economic and financial, completed in 2004, showed the feasibility of cogeneration system for the company. The fact is that this study would not have been exhaustively discussed, otherwise would be institutional actions towards improving the completion of work. In order to resume this discussion in this article was concerned to measure the monetary losses, especially energy, during the period 2004-2006 the production of asphalt for the conventional way.

  5. Pneumoproteins and inflammatory biomarkers in asphalt pavers.

    Science.gov (United States)

    Ellingsen, Dag G; Ulvestad, Bente; Andersson, Lena; Barregard, Lars

    2010-09-01

    Pneumoproteins, biomarkers of systemic inflammation and endothelial activation were studied across a season in 72 asphalt pavers, 32 asphalt plant operators and 19 asphalt engineers. Smokers had lower concentrations of Clara cell protein (CC-16) and surfactant protein A, but higher concentrations of surfactant protein D, interleukin 6, C-reactive protein, fibrinogen and intercellular adhesion molecule (ICAM)-1 than non-smokers. Smokers reporting wheezing had lower mean CC-16 concentration than smokers not reporting wheezing (5.7 vs 8.6 microg l(-1); p = 0.05). Cholesterol, P-selectin and ICAM-1 were lower in pavers and operators at the end compared with the start of the season. This may be related to increased physical activity during the season.

  6. 厂拌热再生沥青混合料在含LSPM路面结构中的应用及评价%Application and Evaluation of Asphalt Mixture by Central Plant Hot Recycling in Pavement Structure with LSPM

    Institute of Scientific and Technical Information of China (English)

    薛彦卿; 黄晓明

    2011-01-01

    Firstly, the reclaimed asphalt pavement was detected, and further mixing proportion of as-phalt mixture AC-20/AC-25 by central plant hot recycling was designed. Secondly, the compressive strength and the compressive resilience modulus of the mixture with different RAP percentages were tested with pressure machine and MTS-810 respectively at 15 and 20℃. Next, the change laws were analyzed and the value ranges were recommended. Finally, structural analysis and evaluation were carried out for over-laid asphalt pavement and perpetual pavement by central plant hot recycling with LSPM so as to demon-strate the technical feasibility of the mixture used as structural layer of surface course in pavement struc-ture with LSPM. The studies have suggested that, for overlaid asphalt pavement by central plant hot recy-cling with LSPM, the compressive resilience modulus of the recycled mixture needs testing in design and the tensile stress at the bottom of recycled structural layer needs checking according to specifications. Mo-reover , the application of recycled mixture in perpetual pavement with LSPM can satisfy the design control indexes.%首先对回收沥青路面材料(RAP)进行了检测,进而设计了厂拌热再生沥青混合料AC-20与AC-25的配合比.其次,利用压力机和MTS-810测定了其不同RAP掺配比例下15℃和20℃抗压强度和抗压回弹模量,分析了变化规律并推荐取值范围.最后,针对含LSPM厂拌热再生加铺沥青路面与含LSPM厂拌热再生永久性路面,进行了结构分析与评价,论证了厂拌热再生沥青混合料作为面层结构层应用于含LSPM路面结构在技术上的可行性.研究表明,对于含LSPM厂拌热再生加铺沥青路面,设计时有必要实测厂拌热再生沥青混合料的抗压回弹模量,并验算该结构层底弯拉应力是否满足规范要求;将厂拌热再生沥青混合料应用于含LSPM的永久性路面能满足设计控制指标.

  7. Quantitative exposure matrix for asphalt fume, total particulate matter, and respirable crystalline silica among roofing and asphalt manufacturing workers.

    Science.gov (United States)

    Fayerweather, William E; Trumbore, David C; Johnson, Kathleen A; Niebo, Ronald W; Maxim, L Daniel

    2011-09-01

    This paper summarizes available data on worker exposures to asphalt fume (soluble fraction), total particulate matter, and respirable crystalline silica (quartz) [hereinafter RCS] over a 30-year period in Owens Corning's asphalt production and roofing manufacturing plants. For the period 1977 through 2006, the air-monitoring database contains more than 1,400 personal samples for asphalt fume (soluble fraction), 2,400 personal samples for total particulate, and 1,300 personal samples for RCS. Unique process-job categories were identified for the asphalt production and roofing shingle manufacturing plants. Quantitative exposures were tabulated by agent, process-job, and calendar period to form an exposure matrix for use in subsequent epidemiologic studies of the respiratory health of these workers. Analysis of time trends in exposure data shows substantial and statistically significant exposure reductions for asphalt fume (soluble fraction), total particulate matter, and respirable crystalline silica at Owens Corning plants. Cumulative distribution plots for the most recent sampling period (2001-2006) show that 95% of the asphalt fume (soluble fraction) measurements were less than 0.25 mg/m3; 95% of the total particulate measurements were less than 2.2 mg/m3; and 95% of the RCS measurements were less than 0.05 mg/m3. Several recommendations are offered to improve the design of future monitoring efforts.

  8. Characterization of asphalt materials containing bio oil from michigan wood

    Science.gov (United States)

    Mills-Beale, Julian

    The objective of this research is to develop sustainable wood-blend bioasphalt and characterize the atomic, molecular and bulk-scale behavior necessary to produce advanced asphalt paving mixtures. Bioasphalt was manufactured from Aspen, Basswood, Red Maple, Balsam, Maple, Pine, Beech and Magnolia wood via a 25 KWt fast-pyrolysis plant at 500 °C and refined into two distinct end forms - non-treated (5.54% moisture) and treated bioasphalt (1% moisture). Michigan petroleum-based asphalt, Performance Grade (PG) 58-28 was modified with 2, 5 and 10% of the bioasphalt by weight of base asphalt and characterized with the gas chromatography-mass spectroscopy (GC-MS), Fourier Transform Infra-red (FTIR) spectroscopy and the automated flocculation titrimetry techniques. The GC-MS method was used to characterize the Carbon-Hydrogen-Nitrogen (CHN) elemental ratio whiles the FTIR and the AFT were used to characterize the oxidative aging performance and the solubility parameters, respectively. For rheological characterization, the rotational viscosity, dynamic shear modulus and flexural bending methods are used in evaluating the low, intermediate and high temperature performance of the bio-modified asphalt materials. 54 5E3 (maximum of 3 million expected equivalent standard axle traffic loads) asphalt paving mixes were then prepared and characterized to investigate their laboratory permanent deformation, dynamic mix stiffness, moisture susceptibility, workability and constructability performance. From the research investigations, it was concluded that: 1) levo, 2, 6 dimethoxyphenol, 2 methoxy 4 vinylphenol, 2 methyl 1-2 cyclopentandione and 4-allyl-2, 6 dimetoxyphenol are the dominant chemical functional groups; 2) bioasphalt increases the viscosity and dynamic shear modulus of traditional asphalt binders; 3) Bio-modified petroleum asphalt can provide low-temperature cracking resistance benefits at -18 °C but is susceptible to cracking at -24 °C; 3) Carbonyl and sulphoxide

  9. Asphalt for draining pavement; Haisuisei hosoyo asphalt

    Energy Technology Data Exchange (ETDEWEB)

    Yamamori, H.; Nakamura, Y. [Mitsubishi Oil Co. Ltd., Tokyo (Japan)

    1994-12-28

    The effect and functions of draining pavement with a superb performance as a paved road were introduced. In the draining pavement, a porous asphalt mixture was used for the surface and base layers of the road and the remaining layers are not in water penetration property. It is necessary that void continues to prevent water film from being generated when rain falls and resistance against water flow is small but durability has problems when the void rate is large. According to the balance, the void rate ranges from 20 to 23 % for execution, thus preventing water splash on a rainy day, hydroplaning, and dazzlement, etc. due to reflection of light. The noise during driving due to the tire of an automobile is reduced by 5 to 6 dB owing to draining pavement. Also, engine noise is reduced to 40 - 60 % since the surface is porous. In the draining pavement, a high-viscosity asphalt is used for a binder and the void rate is large, thus preventing temperature to rise easily due to heat release and achieving an improved flow behavior. 6 refs., 11 figs., 14 tabs.

  10. Analysis of asphalt mixtures on town roads

    OpenAIRE

    Glavica, Primož

    2006-01-01

    Asphalt mixtures are most commonly used composite for construction of top layers of different drive ways. By definition asphalt mixtures are composed of crushed rock, fill, bitumen and additives. Percentage of individual components wary according to the purpose asphalt mixture is to be used for. Asphalt mixtures must be capable of enduring different types of load. According to the type of load asphalt mixtures are divided into asphalt mixtures used for supporting layers and asp...

  11. Laboratory evaluation of selected tar sand asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Button, J.W.; Epps, J.A.; Gallaway, B.M.

    1980-12-01

    Three tar sand asphalts of similar grades prepared from one syncrude by three different refining methods were characterized by tests commonly used to specify paving asphalts together with certain special tests. Asphalt-aggregate mixtures were prepared using these asphalts and tested in the laboratory to determine strength stiffness stability, tensile properties, temperature effects and water susceptibility. Comparison of the tar sand asphalt properties to conventional petroleum asphalt properties reveal no striking differences.

  12. A review of asphalt and asphalt mixture aging

    Directory of Open Access Journals (Sweden)

    Wilmar Darío Fernández-Gómez

    2012-09-01

    Full Text Available This paper presents an extensive review of the pertinent literature regarding asphalt and asphalt mixture Aging. Aging affects flexible pavement performance and is produced by intrinsic and extrinsic variables as well as exposure time. Intrinsic variables include asphalt and aggregate properties, a mixture’s asphalt content, binder film thickness and air void content; extrinsic variables are associated with production (short-term aging and exposure to environmental field conditions (long-term aging. Taken together, both variables demonstrate that aging results from three distinct mechanisms: volatilisation, oxidation and steric hardening. Temperature, pressure and photo degradation treatments are used to simulate aging in the laboratory and empirical and semi-empirical models are created to represent and study aging. Aging increases asphalt complex modulus and decreases the phase angle. Mixtures become stiffer while fatigue life becomes reduced. Carbonyl and sulfoxide group formation in asphalt are often studied as such chemical changes show oxidation in aged asphalts. The prevailing models used to predict asphalt aging are discussed, though more comprehensive research into asphalt aging is still needed.

  13. Polymer Blends Modified Asphalt

    Institute of Scientific and Technical Information of China (English)

    WANG YunPu; LI YuFeng; GAO XiaoHui; WANG RongMin

    2001-01-01

    @@ Asphalt is an important low-cost thermo-plastic material which is widely used for construction, in particular as road-paving. Therefore it is exposed to a wide range of load and weather conditions. Increasing traffic factors, such as heavier loads, higher traffic volume and higher tire pressure demand higher performance pavements. However, this kind of materials does not have good mechanical properties because it is hard and brittle in cold weather, and soft and fluid in a hot environment.

  14. Dead sea asphalts: historical aspects

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, A.

    1978-05-01

    Asphalts are present in the Dead Sea basin in three forms: (1) huge blocks, up to 100 tons in weight, composed of extremely pure (>99.99%) solid asphalt occasionally found floating on the lake, (2) veins, seepages, and cavity and fissure fillings in Lower Cretaceous to Holocene rocks, and (3) ozocerite veins on the eastern shore of the lake. Dead Sea asphalts probably have been documented over a longer period of time than any other hydrocarbon deposit--from antiquity to the 19th century. Major uses of asphalt from the Dead Sea have been as an ingredient in the embalming process, for medicinal purposes, for fumigation, and for agriculture. The first known war for control of a hydrocarbon deposit was in the Dead Sea area in 312 B.C. between the Seleucid Syrians and the Nabatean Arabs who lived around the lake. Surface manifestations of asphalt are linked closely to tectonic activity. In the lake itself, the asphalt is associated with diapirs During certain historic periods, tectonic and diapiric activity caused frequent liberation to the Dead Sea surface of semiliquid asphalt associated with large amounts of hydrogen sulfide gas. When the tectonic activity was attenuated, as in the 19th and 20th centuries, the rate of asphalt seepage to the bottom sediments of the Dead Sea was much slower and the asphalt solidified on the lake bottom. The release of asphalt to the surface became much more sporadic, and may have resulted in part from earthquakes. Thus, future asphalt prospecting in the Dead Sea area should be conducted along the boundaries of diapirs or their associated faults.

  15. 某高速公路乳化沥青厂拌冷再生配合比设计%The design of emulsion asphalt plant cold recycling mix proportion of some highway

    Institute of Scientific and Technical Information of China (English)

    周凯; 徐伟杰

    2009-01-01

    Based on the requirement of reformation engineering of Luozhoujie highway in He' nan province, the emulsion asphalt plant cold re-cycling mix proportion was designed, and the gradation requirement of RAP aggregates and cold recycling mixture performance were discussed. The testing results of road surface before and after construction showed that the situation of road surface after construction was improved.%根据河南省漯周界高速公路改造工程需要,对乳化沥青进行了冷再生配合比设计,就RAP集料的级配要求、冷再生混合料性能评价等作了探讨.施工前后路面检测结果表明工后路面状况得到了改善.

  16. Polyurethane synthesis reactions in asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Bukowski, A.; Gretkiewicz, J.

    1982-04-01

    A series of asphalt-polyurethane composites was prepared by means of polyurethane synthesis in asphalt and carried out in melt. The applied materials were asphalts of differentiated group components content, polyester polyols of chain structure from linear to strongly branched, 2,4-tolylene diisocyanate, 4,4-methylenebis(phenyl isocyanate), and tinorganic catalyst. The asphalt components react with isocyanates to a minimal degree. The influence of the applied substrates, temperature, and polyurethane content in the system on the basic kinetic relations characterizing the process is presented. Polyurethane synthesis in asphalts does not differ in a fundamental way from the obtaining of polyurethanes, especially when their content in the composition is significant, 20 wt% and more.

  17. Feasibility of using 100% Recycled Asphalt Pavement mixtures for road construction

    Science.gov (United States)

    Carlson, Russell Edgar, IV

    Recycled Asphalt Pavement (RAP) is the largest recycled good in the United States and 80 million tons are recycled yearly, saving taxpayers about $1.5 billion dollars. This paper explores the possibility of utilizing 100% RAP materials in asphalt pavement. Asphalt mixtures are produced at 135°C in a typical asphalt plant. However, at 135°C, not all binder from RAP materials may not become effective for coating aggregates. The main objective of the study is to determine the amount of effective binder available from RAP in the asphalt plant. The 100% RAP mixes have aged binder that can alter mix designs and interaction with virgin binder. In this study, to determine low temperature cracking resistance and fatigue performance, samples were prepared using a 100% RAP mix with no virgin binder and a 100% RAP mix with virgin asphalt binder to achieve the optimum binder content of the mix. Second, to determine the effectiveness of binder from RAP materials, compaction tests were performed by heating RAP materials at various temperatures. It was found that 100% RAP mixes cannot be feasible for field use if additional virgin binder is added to reach the optimum asphalt content. Based on limited test results, the low temperature grade was not within proper limits but the beam fatigue testing results were acceptable. Based on compaction test results, additional heating is needed to increase the effectiveness of asphalt binder from RAP materials.

  18. Airborne Exposures to Polycyclic Aromatic Compounds Among Workers in Asphalt Roofing Manufacturing Facilities.

    Science.gov (United States)

    Trumbore, David C; Osborn, Linda V; Johnson, Kathleen A; Fayerweather, William E

    2015-01-01

    We studied exposure of 151 workers to polycyclic aromatic compounds and asphalt emissions during the manufacturing of asphalt roofing products-including 64 workers from 10 asphalt plants producing oxidized, straight-run, cutback, and wax- or polymer-modified asphalts, and 87 workers from 11 roofing plants producing asphalt shingles and granulated roll roofing. The facilities were located throughout the United States and used asphalt from many refiners and crude oils. This article helps fill a gap in exposure data for asphalt roofing manufacturing workers by using a fluorescence technique that targets biologically active 4-6 ring polycyclic aromatic compounds and is strongly correlated with carcinogenic activity in animal studies. Worker exposures to polycyclic aromatic compounds were compared between manufacturing plants, at different temperatures and using different raw materials, and to important external benchmarks. High levels of fine limestone particulate in the plant air during roofing manufacturing increased polycyclic aromatic compound exposure, resulting in the hypothesis that the particulate brought adsorbed polycyclic aromatic compounds to the worker breathing zone. Elevated asphalt temperatures increased exposures during the pouring of asphalt. Co-exposures in these workplaces which act as confounders for both the measurement of total organic matter and fluorescence were detected and their influence discussed. Exposures to polycyclic aromatic compounds in asphalt roofing manufacturing facilities were lower than or similar to those reported in hot-mix paving application studies, and much below those reported in studies of hot application of built-up roofing asphalt. These relatively low exposures in manufacturing are primarily attributed to air emission controls in the facilities, and the relatively moderate temperatures, compared to built-up roofing, used in these facilities for oxidized asphalt. The exposure to polycyclic aromatic compounds was a very

  19. Polymer Blends Modified Asphalt

    Institute of Scientific and Technical Information of China (English)

    WANG; YunPu

    2001-01-01

    Asphalt is an important low-cost thermo-plastic material which is widely used for construction, in particular as road-paving. Therefore it is exposed to a wide range of load and weather conditions. Increasing traffic factors, such as heavier loads, higher traffic volume and higher tire pressure demand higher performance pavements. However, this kind of materials does not have good mechanical properties because it is hard and brittle in cold weather, and soft and fluid in a hot environment.  ……

  20. Interaction nonlinearity in asphalt binders

    Science.gov (United States)

    Motamed, Arash; Bhasin, Amit; Liechti, Kenneth M.

    2012-05-01

    Asphalt mixtures are complex composites that comprise aggregate, asphalt binder, and air. Several research studies have shown that the mechanical behavior of the asphalt mixture is strongly influenced by the matrix, i.e. the asphalt binder. Characterization and a thorough understanding of the binder behavior is the first and crucial step towards developing an accurate constitutive model for the composite. Accurate constitutive models for the constituent materials are critical to ensure accurate performance predictions at a material and structural level using micromechanics. This paper presents the findings from a systematic investigation into the nature of the linear and nonlinear response of asphalt binders subjected to different types of loading using the Dynamic Shear Rheometer (DSR). Laboratory test data show that a compressive normal force is generated in an axially constrained specimen subjected to torsional shear. This paper investigates the source of this normal force and demonstrates that the asphalt binder can dilate when subjected to shear loads. This paper also presents the findings from a study conducted to investigate the source of the nonlinearity in the asphalt binder. Test results demonstrate that the application of cyclic shear loads results in the development of a normal force and a concomitant reduction in the dynamic shear modulus. This form of nonlinear response is referred to as an "interaction nonlinearity". A combination of experimental and analytical tools is used to demonstrate and verify the presence of this interaction nonlinearity in asphalt binders. The findings from this study highlight the importance of modeling the mechanical behavior of asphalt binders based on the overall stress state of the material.

  1. 75 FR 12988 - National Emission Standards for Hazardous Air Pollutants for Area Sources: Asphalt Processing and...

    Science.gov (United States)

    2010-03-18

    ... Sources: Asphalt Processing and Asphalt Roofing Manufacturing; Technical Correction AGENCY: Environmental... the asphalt processing and asphalt roofing manufacturing area source category (74 FR 63236). Following... the asphalt processing and asphalt roofing manufacturing area source category on December 2, 2009...

  2. Curing Behavior of Epoxy Asphalt

    Institute of Scientific and Technical Information of China (English)

    YU Jianying; CONG Peiliang; WU Shaopeng; CHENG Songbo

    2009-01-01

    The curing process of epoxy asphalt was analyzed by Fourier transform infrared (FT-IR)spectroscopy.Effect of curing temperature on viscosity of epoxy asphalt,and changes of mechanical properties with curing time were investigated.The evolution of concentration of epoxy band was followed as a function of the applied curing process.The experimental results indicate that the curing reaction rate of epoxy asphalt is invariable before 70 min at 120℃,and it decreases when curing time exceeds 70 min.The viscosity of epoxy asphalt increases slowly with curing time at initial curing stage.But it increases quickly after initial curing stage and the initial curing time decreases as the curing temperature increases.The tensile strength increases slowly at incipient curing stage and increases rapidly when curing time is form 20 min to 70 min.The elongation at break shows a decrease with curing time,but it exceeds 200%after cured.

  3. Investigation of modified asphalt concrete

    Science.gov (United States)

    Zimich, Vita

    2016-01-01

    Currently the problem of improving the asphalt quality is very urgent. It is used primarily as topcoats exposed to the greatest relative to the other layers of the road, dynamic load - impact and shear. The number of cars on the road, the speed of their movement, as well as the traffic intensity increase day by day. We have to upgrade motor roads, which entails a huge cost. World experience shows that the issue is urgent not only in Russia, but also in many countries in Europe, USA and Asia. Thus, the subject of research is the resistance of asphalt concrete to water and its influence on the strength of the material at different temperatures, and resistance of pavement to deformation. It is appropriate to search for new modifiers for asphaltic binder and mineral additives for asphalt mix to form in complex the skeleton of the future asphalt concrete, resistant to atmospheric condensation, soil characteristics of the road construction area, as well as the growing road transport load. The important task of the work is searching special modifying additives for bitumen binder and asphalt mixture as a whole, which will improve the quality of highways, increasing the period between repairs. The methods described in the normative-technical documentation were used for the research. The conducted research allowed reducing the frequency of road maintenance for 7 years, increasing it from 17 to 25 years.

  4. Nanomaterials Applied in Asphalt Modification: A Review

    Institute of Scientific and Technical Information of China (English)

    Changqing Fang; Ruien Yu; Shaolong Liu; Yan Li

    2013-01-01

    Nanotechnology has been gradually penetrated into the field of asphalt modification.Seemingly magic effects of nanomaterials have now been brought to improve the performance of asphalt.To demonstrate many of the prospective applications,researchers have conducted a series of positive and effective efforts dealing with the preparation of modified asphalt to demonstrate the mechanism of modification and the resultant improvement in performance.In this review,various nanomaterials used in asphalt modification are initially presented,followed by the methods employed to modify the asphalt with these materials and finally the effects of nanomaterials on the performance of base asphalt are presented and the modification mechanisms are discussed.Based on the current research results,the influence of preparation process parameters on the compatibility of every phase in the modified asphalt and the stability of the modified asphalt system are described.Finally,the development trend of the topic field is projected.

  5. Sinopec Launches Shanghai Asphalt Sales Company

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Sinopec Shanghai Asphalt Sales Company was launched in Shanghai on September 22, marking Sinopec as the largest asphalt supplier in China integrated in famous brand,production, sales and research, and distribution network.This is another important initiative for Sinopec's asphalt segment, after Sinopec won the bid for construction of F 1 racing course, to grasp the market opportunities, further improve the product quality and the level of after-sales services, and further make its asphalt business larger and stronger.

  6. Floating asphalt blocks of the Dead Sea

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, A. (Weizmann Inst. of Science, Rehovot, Israel); Aizenshtat, Z.; Goldberg, M.

    1980-01-01

    Large blocks of mineral matter free (less than 0.1%) asphalt are occasionally found floating on the surface of the Dead Sea. Chemical, spectroscopic and isotopic data are given for the asphalt. The source of the asphalt is not accurately known, but presumably it represents mobilization of heavy viscous asphaltic masses at depth below the lake bottom into the floor of the lake. It may be released to the surface by earth tremors.

  7. VISCOELASTIC STRUCTURAL MODEL OF ASPHALT CONCRETE

    Directory of Open Access Journals (Sweden)

    V. Bogomolov

    2016-06-01

    Full Text Available The viscoelastic rheological model of asphalt concrete based on the generalized Kelvin model is offered. The mathematical model of asphalt concrete viscoelastic behavior that can be used for calculation of asphalt concrete upper layers of non-rigid pavements for strength and rutting has been developed. It has been proved that the structural model of Burgers does not fully meet all the requirements of the asphalt-concrete.

  8. Induction Healing of Porous Asphalt Concrete

    NARCIS (Netherlands)

    Liu, Q.

    2012-01-01

    Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surfac

  9. The improvement of pavement performance using asphalt rubber hot mixes

    OpenAIRE

    Pais, Jorge C.; Pereira, Paulo A. A.

    2007-01-01

    The need of a better pavement performance has led researchers to develop new road materials, mainly for the asphalt layers, where the modification of the asphalt is the main example. This modification usually forces the use of polymers and fibers and, more recently, the use of crumb rubber from ground tires, where the modified asphalt is known as asphalt rubber. This asphalt rubber used in asphalt mixtures produces a superior performance if compared to the asphalt mixtures with...

  10. Asphalt Mixture for the First Asphalt Concrete Directly Fastened Track in Korea

    Directory of Open Access Journals (Sweden)

    Seong-Hyeok Lee

    2015-01-01

    Full Text Available The research has been initiated to develop the asphalt mixtures which are suitable for the surface of asphalt concrete directly fastened track (ADFT system and evaluate the performance of the asphalt mixture. Three aggregate gradations which are upper (finer, medium, and below (coarser. The nominal maximum aggregate size of asphalt mixture was 10 mm. Asphalt mixture design was conducted at 3 percent air voids using Marshall mix design method. To make impermeable asphalt mixture surface, the laboratory permeability test was conducted for asphalt mixtures of three different aggregate gradations using asphalt mixture permeability tester. Moisture susceptibility test was conducted based on AASHTO T 283. The stripping percentage of asphalt mixtures was measured using a digital camera and analyzed based on image analysis techniques. Based on the limited research results, the finer aggregate gradation is the most suitable for asphalt mixture for ADFT system with the high TSR value and the low stripping percentage and permeable coefficient. Flow number and beam fatigue tests for finer aggregate asphalt mixture were conducted to characterize the performance of asphalt mixtures containing two modified asphalt binders: STE-10 which is styrene-butadiene-styrene (SBS polymer and ARMA which is Crum rubber modified asphalt. The performance tests indicate that the STE-10 shows the higher rutting life and fatigue life.

  11. Asphalt fume exposure levels in North American asphalt production and roofing manufacturing operations.

    Science.gov (United States)

    Axten, Charles W; Fayerweather, William E; Trumbore, David C; Mueller, Dennis J; Sampson, Arthur F

    2012-01-01

    This study extends by 8 years (1998-2005) a previous survey of asphalt fume exposures within North American asphalt processing and roofing product manufacturing workers. It focuses on characterizing personal, full-shift samples and seeks to address several limitations of the previous survey. Five major roofing manufacturers with established occupational health programs submitted workplace asphalt fume sampling results to a central repository for review and analysis. A certified industrial hygienist-led quality assurance team oversaw the data collection, consolidation, and analysis efforts. The analysis dataset consisted of 1261 personal exposure samples analyzed for total particulate (TP) and benzene soluble fraction (BSF) using existing NIOSH methods. For BSF, the survey's arithmetic (0.25 mg/m(3), SD = 0.62) and geometric (0.12 mg/m(3), GSD = 2.88) means indicate that the industry has sustained the control levels achieved in the late 1980s, early 1990s. Similar results were found for TP. The survey-wide summary statistics are consistent with other post-1990 multi-company exposure studies. Although these findings indicate that currently available controls are capable of achieving substantial (95%) compliance with the current threshold limit value in asphalt processing and inorganic shingle and roll plants, they also show that the majority of plants are not achieving this level of exposure control, and that exposures are significantly higher in plants making other product lines, particularly organic felt products. The current retrospective survey of existing company exposure data, like its predecessor, has several important limitations. These include lack of data on smaller manufacturers and on several commercially important product lines; insufficient information on the prevalence and effectiveness of engineering controls; no standard criteria by which to define and assess exposures in non-routine operations; and a paucity of exposure data collected as part of a

  12. Evaluation on Low Temperature Performance of Recycled Asphalt Mixture Using Warm Mix Asphalt Technology

    Directory of Open Access Journals (Sweden)

    Xiaolan Duan,

    2015-04-01

    Full Text Available In this paper, the basic idea is about the recycled technology of asphalt mixture, more in-depth study of the lowtemperature performance of warm mix asphalt(WMA.First of all, Including the evaluation of low temperature performance of WMA made of reclaimed asphalt pavement (RAP (passed and not passed 2.36mm screen, and the influence of WMA with RAP mixed of different dosage of dispersant. Then, using the SBS modified asphalt and base asphalt were test at low temperature, research on the influence of different type of asphalt to the low temperature performance of WMA.

  13. Recombination of asphalt with bio-asphalt : binder formulation and asphalt mixes application

    OpenAIRE

    Peralta, J.; Williams, R. Christopher; Silva, Hugo Manuel Ribeiro Dias da; Machado, A. V.

    2014-01-01

    The bio-oil from fast pyrolysis is mainly produced using organic waste materials. This is a viscoelastic material, and after a heat treatment it has a viscosity and high/intermediate thermal rheological behavior similar to many types of asphalt used in the paving industry. These two characteristics show that this material could be a good alternative to replace asphalt. In order to improve the performance of bio-oil, it was hypothesized that the addition of crumb rubber would change the rheolo...

  14. Permanent deformation of asphalt mixes

    NARCIS (Netherlands)

    Muraya, P.M.

    2007-01-01

    This dissertation describes the results of a research that was conducted on the permanent deformation of asphalt mixtures. Central to this research was the separate characterization of the contribution of the aggregate skeleton and the bituminous mortar towards resistance to permanent deformation. T

  15. Rheological characteristics of aged asphalt binder

    Institute of Scientific and Technical Information of China (English)

    刘聪慧; 吴少鹏; 刘全涛; 朱国军

    2008-01-01

    Different aging levels(RTFOT,PAV-10h,PAV-20h and PAV-30 h) of asphalt binders with various mass ratios of mineral powder to asphalt(0,0.4,0.8,1.2,1.6,2.0) were used to investigate the rheological properties of aged asphalt binders with respect to their short and long terms aging characteristics.Viscosity test,dynamic shear test and creep test were conducted.The test results indicate that the viscosity of aged asphalt binder increases sharply with the extension of aging period.Complex shear modulus of aged asphalt increases,which indicates that the stiffness of asphalt binders can increase.The phase angle for aged asphalt binders reduces,which indicates that the elastic portion for viscoelastic property of asphalt binders increases.|G*|·sin δ increases after aging procedure which means that the fatigue resistance becomes poor.The creep test results show that creep strain curves varies remarkably for virgin and aged asphalt binders.The total strain during loading period and the permanent strain decreases significantly for aged asphalt binders,which implies that the elastic portion increases and the viscous portion decreases.

  16. STATE OF TRANSPORT PROCESSES FOR REPAIRING AND ASPHALTING OF ASPHALT ROADS AND WAYS THEIR DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Nikolaev N. N.

    2015-04-01

    Full Text Available The article explains the importance of the transport process when performing repair jobs of asphalt roads. The scheme of the technological process was drawn up; job steps were identified, while the latter may be characterized by non-productive downtime of transport as well as that one of technological machines. We have analyzed the following steps of the flowchart of the road concrete mix transportation: the preparation of the road concrete mix for transportation, loading, transportation, unloading, laying and packing. The transportation of goods starts at the working site of their production and ends at the site of their consumption. The transportation process is a multistep and multioperational process having the greater diversity of technological, operational and economic operations, which must be correctly organized. It is extremely important to deliver the road concrete mix of coating plant (OP just in time, while avoiding the unproductive idle standing of the equipment, the deterioration of the mixture, as well as performing the job steps at minimum transportation cost savings. The successful combining of the steps of the concept organization of the road concrete mix transportation (coating plant, asphalt laying step, transportation step will improve the performance and will provide the reduction of the job cost. One must perform the coordination of job steps on different road sections using information technologies and communication facility

  17. The Development of Recycling Agent for Asphalt Pavement

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A type of recycling agent was developed and its use for modifying used asphalt is described.The results show that the viscosity and three main properties of the aged asphalt were remarkably improved.With 5%-7% content of recycling agent, the main properties of recycled asphalt comported with China GB asphalt standard AH-70 and the recycled asphalt concrete could be used as high-grade highway.Furthermore,the recycling mechanism of the aged asphalt is discussed.

  18. Utilization of Recycled Asphalt Concrete with Warm Mix Asphalt and Cost-Benefit Analysis

    OpenAIRE

    Julide Oner; Burak Sengoz

    2015-01-01

    The asphalt paving industries are faced with two major problems. These two important challenges are generated with an increase in demand for environmentally friendly paving mixtures and the problem of rapidly rising raw materials. Recycling of reclaimed asphalt pavement (RAP) is a critical necessity to save precious aggregates and reduce the use of costly bitumen. Warm Mix Asphalt (WMA) technology provides not only the option of recycling asphalt pavement at a lower temperature than the tempe...

  19. The Optimal Design of Emulsified Asphalt Plant-Mixed Cold-Recycling Mixture Used in the Middle and Lower Layer of Asphalt Pavement%基于中下面层的乳化沥青厂拌冷再生配合比优化设计

    Institute of Scientific and Technical Information of China (English)

    王瑞

    2015-01-01

    我国乳化沥青厂拌冷再生混合料一般作为基层使用,国内外研究表明,设计合理的乳化沥青厂拌冷再生混合料同样可以用在中下面层.本研究参考贝雷法级配设计理念,提出以CF比和CA比作为乳化沥青厂拌冷再生设计参数,研究不同CF比和CA比对其路用性能的影响.室内试验结果表明,CF比和CA比存在一个合适的范围使厂拌乳化沥青冷再生沥青混合料的路用性能在此范围内使用效果较好,并根据中下面层的功能特点,考虑乳化沥青冷再生混合料的强度、高温性能和水稳定性能,推荐中粒式乳化沥青厂拌冷再生的CF比区间为(0.7~1.2),CA比为(0.7~1.1).通过试验段对以CF比和CA比选取的级配进行验证,结果表明设计的混合料具有良好的路用性能.%In China,the emulsified asphalt plant⁃mixed cold⁃recycling mixture are commonly used as a base. Both the domestic and foreign research shows that reasonable designed emulsified asphalt plant⁃mixed cold⁃recycling mixture can be used in the middle and lower layer of asphalt pavement. Based on the bailey method,we studied the effect of different CF ratio and CA ratio on the performance of mixture and proposed CF ratio and CA ratio in designing the emulsified asphalt plant⁃mixed cold⁃recycling mixture. All the laboratory experiment results show that when the CF ratio and CA ratio in an appropriate range,the performance of the emulsified asphalt plant⁃mixed cold⁃recycling mixture is good. Considering the functions of the middle and lower layer in asphalt pavement ,and the high temperature stability and water stability of the emulsified asphalt plant⁃mixed cold⁃recycling mixture,we recommend that the CF ratio is between 0.7 and 1.2,and the CA ratio is between 0.7 and 1.1. Through the test section,the results show that it has good performance of the designed emulsified asphalt plant⁃mixed cold⁃recycling mixture.

  20. A hybrid strategy in selecting diverse combinations of innovative sustainable materials for asphalt pavements

    Directory of Open Access Journals (Sweden)

    Baron Colbert

    2016-04-01

    Full Text Available This project integrates recent innovations of recycled materials used in designing and building sustainable pavements. An increasing environmental awareness and the demand for improving economic and construction efficiencies, through measures such as construction warrantees and goals to reduce air pollution under the Kyoto Protocol, have increased the efforts to implement sustainable materials in roadways. The objective of this research is to develop a systematic approach toward selecting optimum combinations of sustainable materials for the construction of asphalt pavements. The selected materials, warm mix asphalt (WMA, recycled asphalt shingles (RAS, and reclaimed asphalt pavement (RAP were incorporated in this study. The results of this research are intended to serve as guidelines in the selection of the mixed sustainable materials for asphalt pavements. The approach developed from this project draws upon previous research efforts integrating graphical modeling with optimizing the amount of sustainable materials based on the performance. With regard to moisture susceptibility and rutting potential test results, as well as the MIM analysis based on a 95% confidence interval, the rutting performance and moisture susceptibility of asphalt mixtures are not significantly different regardless of the percentages of RAS, RAP, or WMA. The optimum mixture choices could be made by the plant emission rankings with consideration of the optimal WMA types, percentages of RAS/RAP, and WMA production temperatures. The WMA mixtures prepared with 75% RAP and Advera® WMA have produced the lowest CO2 emissions among the investigated mixture types.

  1. Drying and Heating Modelling of Granular Flow: Application to the Mix-Asphalt Processes

    Directory of Open Access Journals (Sweden)

    L Le Guen

    2011-01-01

    Full Text Available Concrete asphalt is a hydrocarbon material that includes a mix of mineral components along with a bituminous binder. Prior to mixing, its production protocol requires drying and heating the aggregates. Generally performed in a rotary drum, these drying and heating steps within mix asphalt processes have never been studied from a physical perspective. We are thus proposing in the present paper to analyze the drying and heating mechanisms when granular materials and hot gases are involved in a co-current flow. This process step accounts for a large proportion of the overall energy consumed during hot-mix asphalt manufacturing. In the present context, the high energy cost associated with this step has encouraged developing new strategies specifically for the drying process. Applying new asphalt techniques so that an amount of moisture can be preserved in the asphalt concrete appears fundamental to such new strategies. This low-energy asphalt, also referred to as the "warm technique", depends heavily on a relevant prediction of the actual moisture content inside asphalt concrete during the mixing step. The purpose of this paper is to present a physical model dedicated to the evolution in temperature and moisture of granular solids throughout the drying and heating steps carried out inside a rotary drum. An initial experimental campaign to visualize inside a drum at the pilot scale (i.e. 1/3 scale has been carried out in order to describe the granular flow and establish the necessary physical assumptions for the drying and heating model. Energy and mass balance equations are solved by implementing an adequate heat and mass transfer coupling, yielding a 1D model from several parameters that in turn drives the physical modeling steps. Moreover, model results will be analyzed and compared to several measurements performed in an actual asphalt mix plant at the industrial scale (i.e. full scale.

  2. Evaluation on Low Temperature Performance of Recycled Asphalt Mixture Using Warm Mix Asphalt Technology

    OpenAIRE

    Xiaolan Duan,; Chunge Li

    2015-01-01

    In this paper, the basic idea is about the recycled technology of asphalt mixture, more in-depth study of the lowtemperature performance of warm mix asphalt(WMA).First of all, Including the evaluation of low temperature performance of WMA made of reclaimed asphalt pavement (RAP) (passed and not passed 2.36mm screen), and the influence of WMA with RAP mixed of different dosage of dispersant. Then, using the SBS modified asphalt and base asphalt were test at low temperature, researc...

  3. Development of asphaltic mix with waste products use

    Directory of Open Access Journals (Sweden)

    Pugin Konstantin Georgievich

    2014-07-01

    Full Text Available The trend of high growth of the vehicle fleet in Russia along with the positive impact on the socio-economic development of the country has a number of adverse consequences, one of which is the high accident rate on the roads. The paper considers modern way to provide the safe vehicles flow with the use of colored asphalt, which is a kind of hot asphalt and can have a variety of colors, which consists of coloring pigments. The conventional method of coloring the asphalt mix is produced by adding color rubble or pigmenting additives. The task, which was put forward, was the establishment of such road concrete mix, from which, without the use of primary materials and without increasing the consumption of bitumen, asphalt concrete road surfaces of acceptable strength could be obtained. As a pigment the dust of gas purification system of electrical furnace DSP - 60 of «Kamastal» plant, Perm, was used. The composition of the dust waste from the furnace consists of metal oxides and silicates. Dust-gas-cleaning is a fine powder with a high specific surface (1.2…2.5 thousand cm /g and bulk density of 3.7…4.2 g/cm . The powder color is dark brown. The density of the ready colored asphalt samples is 2.47...2.49 g/cm , and water saturation is 3.50…3.55 %. As a result of the research the diagrams of the dependence of road concrete mix’s water saturation from dust percentage and a diagram of dependence of concrete mixes’ durability from dust percentage at t = 20° and 50° C were built. After analyzing the obtained curves it can be concluded that the increase of the percentage of dust leads to increase of water saturation of road concrete mix and reduced strength. Thus, the developed asphalt concrete mix allows visually separating the lanes on the road, it has the relevant regulatory requirements durability and water resistance. This mixture corresponds to the type B mark III and can be used in regions I, II, and partly III of road-climatic zones

  4. Pelletized Asphalt for Airfield Damage Repair

    Science.gov (United States)

    2009-08-01

    14, 2008. Gulf Asphalt Contractor (GAC), Panama City, FL, provided all labor , material (with the exception of pelletized asphalt) and equipment for...produced. Benefits include: reduced transportation, traffic disruption, operating costs, and labor costs, while increased productivity and... Mercado , E. A., A. Epps Martin, E. S. Park, C. Spiegelman, and C. J. Glover, “Factors Affecting Binder Properties between Production and Construction

  5. Hot Mix Asphalt Recycling: Practices and Principles

    NARCIS (Netherlands)

    Mohajeri, M.

    2015-01-01

    Hot mix asphalt recycling has become common practice all over the world since the 1970s because of the crisis in oil prices. In the Netherlands, hot recycling has advanced to such an extent that in most of the mixtures more than 50% of reclaimed asphalt (RA) is allowed. These mixtures with such a hi

  6. Asphalt Raking. Instructor Manual. Trainee Manual.

    Science.gov (United States)

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet consists of the instructor and trainee manuals for an asphalt raking course. The instructor manual contains a course schedule for 4 days of instruction, content outline, and instructor outline. The trainee manual is divided into five sections: safety, asphalt basics, placing methods, repair and patching, and clean-up and maintenance.…

  7. Rheological Evaluation of Polymer Modiifed Asphalt Binders

    Institute of Scientific and Technical Information of China (English)

    WANG Lan; CHANG Chunqing

    2015-01-01

    The microstructure and dynamic rheological characteristics of asphalt containing different polymer modifiers (crumb rubber, styrene-butadiene-styrene and crumb rubber mix with styrene-butadiene-styrene) at mid and high service temperature levels were investigated by using scanning electron microscopy(SEM), dynamic shear rheometer(DSR) and repeat creep test. The main objective of the investigation was to rank the modifiers based on their effect on performance characteristics of asphalt under service conditions. To evaluate the effect of different modiifers on the viscoelastic response of asphalt, the temperature and frequency dependences of the dynamic viscoelastic properties were compared. The mid-temperature fatigue resistance and high-temperature rutting resistance of three polymer modiifed asphalts were evaluated to predict their ifeld performance in roads. Based on the current results, an improved rutting factor was proposed to determine the rutting resistance of asphalt pavements. In addition, the viscous stiffness (Gv), deifned as the reciprocal of viscous compliance, was used to evaluate the high-temperature deformation resistance of asphalt mixtures. The experimental results indicate that the asphalt containing crumb rubber only shows superior performance at mid and high service temperatures in all three modiifed asphalt binders due to the action of the crumb rubber.

  8. Asbestos Tailings as Aggregates for Asphalt Mixture

    Institute of Scientific and Technical Information of China (English)

    LIU Xinoming; XU Linrong

    2011-01-01

    To use many asbestos tailings collected in Ya-Lu highway, and to explore the feasibility of using asbestos tailings as aggregates in common asphalt mixtures, and properties of some asphalt mixtures were evaluated as well. X-ray diffraction (XRD), X-ray fluorescent (XRF), and atomic absorption spectrophotometry (AAS) were employed to determine the solid waste content of copper, zinc, lead, and cadmium. Volume properties and pavement performances of AC-25 asphalt mixture with asbestos tailings were also evaluated compared with those with basalt as aggregates.XRD and XRF measurement results infer that asbestos tailing is an excellent road material. Volume properties of AC-25 asphalt mixture with asbestos tailings satisfied the related specifications. No heavy metals and toxic pollution were detected in AAS test and the value of pH test is 8.23, which is help to the adhesion with asphalt in the asphalt concrete. When compared with basalt, high temperature property and the resistance to low temperature cracking of AC-25 asphalt mixture was improved by using asbestos tailings as aggregates. In-service AC-25 asphalt pavement with asbestos tailings also presented excellent performance and British Pendulum Number (BPN) coefficient of surface.

  9. Curing Reaction Model of Epoxy Asphalt Binder

    Institute of Scientific and Technical Information of China (English)

    QIAN Zhendong; CHEN Leilei; WANG Yaqi; SHEN Jialin

    2012-01-01

    In order to understand the strength developing law of the epoxy asphalt mixture,a curing reaction model of the epoxy asphalt binder was proposed based upon the thermokinetic analysis.Given some assumptions,the model was developed by applying the Kissinger law as well as Arrhenius equation,and the differential scanning calorimetry was performed for estimating the model parameters.To monitor the strength development of the epoxy asphalt mixture,a strength test program was employed and then results were compared to those produced from the proposed model.The comparative evaluation shows that a good consistency exists between the outputs from test program and the proposed model,indicating that the proposed model can be used effectively for simulating the curing reaction process for the epoxy asphalt binder and predicting the strength development for the epoxy asphalt mixture.

  10. USE OF RECLAIMED ASPHALT PAVEMENT WITH MILLED ROAD PAVEMENT LAYERS

    Directory of Open Access Journals (Sweden)

    Andrzej Plewa

    2015-07-01

    Full Text Available The article presents the results of research on the functional properties of asphalt mixes using RAP obtained from milling asphalt road pavements. Asphalt concrete AC 22P with 0%, 10%, 15% and 20% addition of RAP used for base course of road pavements were designed. It was found that asphalt mixes with RAP characterized by comparable and in some cases better functional properties compared to the asphalt mixes without RAP (0%. One should notice the influence of RAP on the performance and durability of the asphalt mixtures, as compared to virgin asphalt mixtures (without RAP.

  11. USE OF RECLAIMED ASPHALT PAVEMENT WITH MILLED ROAD PAVEMENT LAYERS

    OpenAIRE

    Andrzej Plewa; Marta Wasilewska; Władysław Gardziejczyk; Paweł Gierasimiuk

    2015-01-01

    The article presents the results of research on the functional properties of asphalt mixes using RAP obtained from milling asphalt road pavements. Asphalt concrete AC 22P with 0%, 10%, 15% and 20% addition of RAP used for base course of road pavements were designed. It was found that asphalt mixes with RAP characterized by comparable and in some cases better functional properties compared to the asphalt mixes without RAP (0%). One should notice the influence of RAP on the performance and ...

  12. Strength Mechanism and Influence Factors for Cold Recycled Asphalt Mixture

    OpenAIRE

    Tao Ma; Hao Wang; Yongli Zhao; Xiaoming Huang; Yuhui Pi

    2015-01-01

    This study focused on the key factors affecting the tensile strength of cold recycled asphalt mixture with cement and emulsified asphalt. The specific surface areas and strength of RAP were analyzed. The interaction between the emulsified asphalt and cement was observed. Comprehensive laboratory testing was conducted to evaluate the influences of RAP, emulsified asphalt, and cement on the tensile strength of cold recycled asphalt mixture. It is found that although RAP is used as aggregates, i...

  13. 厂拌冷再生沥青混合料路用性能研究%Research in the road performance of plant mixed cold recycling asphalt mixture

    Institute of Scientific and Technical Information of China (English)

    赵文美

    2015-01-01

    This paper tested the road performance of 50% RAP emulsified cold recycling asphalt mixture,introduced the experiment used raw materials and mix proportion design,combining with the test scheme,analyzed the test results,pointed out that the indoor emulsified asphalt re-cycling asphalt mixture should make 35 h preservation under 60 ℃ temperature conditions,the construction site should make 3 d~7 d natural preservation based on environment,the strength and high temperature stability of each cement dosage emulsified asphalt cold recycling mixture could meet the construction requirements,the cement dosage was 1. 5%,more economic.%对50%RAP乳化沥青冷再生混合料路用性能进行了试验,介绍了试验所用原材料及配比设计,结合试验方案,对试验结果作了分析,指出试验室内乳化沥青再生混合料需进行60℃温度状态下的35 h养生,施工现场需根据环境进行3 d~7 d的自然养生;各水泥剂量乳化沥青冷再生混合料的强度及高温稳定性都能满足施工要求,水泥剂量为1.5%较经济。

  14. Fatigue behavior of asphalt mixtures colombian with addition recycled pavement asphalt to 100 %

    Directory of Open Access Journals (Sweden)

    Neidy Betssey Patiño Boyacá

    2015-01-01

    Full Text Available This research was conducted in order to establish the fatigue behavior of asphalt mixtures with gradations MD20 Instituto de Desarrollo Urbano (IDU and MDC 2 of The Instituto Nacional de Vías (INVIAS, with addition of recycled granular flexible pavement (RAP with asphalt of penetration 60/70 and 80/100. The first step was to characterize the asphalt and RAP as well as calculate the optimum percentage of asphalt to be added to 100 % RAP mixtures. Then samples were fabricated with different trapezoidal gradations and asphalt, to be tested finally fatigue at different deformations. Among the results found, it was determined that the tested mixtures have a high stiffness; although, it varies depending on the asphalt mix used and that the best fatigue life with respect to those studied is the MDC-2 with bitumen 80/100.

  15. Behaviour of asphalt rubber mixtures with different crumb rubber and asphalt binder sources

    OpenAIRE

    Fontes, Liseane P. T. L.; Pereira, Paulo A. A.; Pais, Jorge C.; Trichês, Glicério

    2006-01-01

    This study evaluates the performance in laboratory of gap graded mixture prepared with different crumb rubber types and different conventional grade asphalt binders. The asphalt rubbers were prepared via wet process (continuous blend) and their properties were measured through the current tests: (i) penetration;(ii) softening point: (iii) resilience; (iv) apparent viscosity using a Brookfield viscometer. The rheological properties for conventional asphalts were measured too, in order to evalu...

  16. The shakeout scenario: Meeting the needs for construction aggregates, asphalt, and concrete

    Science.gov (United States)

    Langer, W.H.

    2011-01-01

    An Mw 7.8 earthquake as described in the ShakeOut Scenario would cause significantdamage to buildings and infrastructure. Over 6 million tons of newly mined aggregate would be used for emergency repairs and for reconstruction in the five years following the event. This aggregate would be applied mostly in the form of concrete for buildings and bridges, asphalt or concrete for pavement, and unbound gravel for applications such as base course that goes under highway pavement and backfilling for foundations and pipelines. There are over 450 aggregate, concrete, and asphalt plants in the affected area, some of which would be heavily damaged. Meeting the increased demand for construction materials would require readily available permitted reserves, functioning production facilities, a supply of cement and asphalt, a source of water, gas, and electricity, and a trained workforce. Prudent advance preparations would facilitate a timely emergency response and reconstruction following such an earthquake. ?? 2011, Earthquake Engineering Research Institute.

  17. Anti-blocking model and experimental research on vibrating screen of asphalt mixing plant%沥青搅拌设备振动筛防堵模型与试验研究

    Institute of Scientific and Technical Information of China (English)

    刘洪海; 曾凡记; 程旭; 周峰

    2015-01-01

    The stability of production gradation of mixture is determined by the screening efficiency of vibrating screen of asphalt mixing plant, and the blocking sieve may result in the change of effi-ciency. To study the problem of blocking sieve, a kinematics model of vibrating screen is established and the relationships of vibration parameters, the qualities of eccentric block and vibrating screen, and equivalent rotation radius are determined by analyzing the structure, working mechanism and motion characteristics of vibrating screen;mechanical models of rigid sieve and elastic sieve are es-tablished respectively and the influence of parameters of vibrating screen, such as kinetic parame-ters, physical properties of the material, the size of vibration sieve mesh and mesh stiffness, on blocking screen is explored by analyzing the motion characteristics and dynamics of particles under the condition of blocking screen. The result shows that the blocking rate of 5 mmí5 mm rigid square-hole vibration screen is larger ( more than 10%) , and the escape ability of particles is rela-tively lower under the conventional design of frequency ( 16 Hz ) and amplitude ( 5 mm ) . There-fore, it is necessary to raise the vibration strength and to reduce the blocking rate when the mesh size is less than 6 mm;the elastic sieve of a smaller stiffness is the best solution to avoid increasing tech-nical difficulties or affecting the structure strength of equipment as a result of the increased vibration parameters.%沥青混合料搅拌设备振动筛的筛分效率决定了混合料生产级配的稳定性,堵筛会使筛分效率发生变化。为了研究堵筛问题,通过对振动筛的结构、工作机理和运动特性分析,建立了振动筛的运动学模型,确定了振动参数与偏心块质量、振动筛质量、当量转动半径等参数之间关系;通过对堵筛条件下颗粒的运动特性和动力学分析,分别建立了刚性筛网和弹

  18. Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling

    Science.gov (United States)

    Safaei, Farinaz; Castorena, Cassie; Kim, Y. Richard

    2016-08-01

    Fatigue cracking is a major form of distress in asphalt pavements. Asphalt binder is the weakest asphalt concrete constituent and, thus, plays a critical role in determining the fatigue resistance of pavements. Therefore, the ability to characterize and model the inherent fatigue performance of an asphalt binder is a necessary first step to design mixtures and pavements that are not susceptible to premature fatigue failure. The simplified viscoelastic continuum damage (S-VECD) model has been used successfully by researchers to predict the damage evolution in asphalt mixtures for various traffic and climatic conditions using limited uniaxial test data. In this study, the S-VECD model, developed for asphalt mixtures, is adapted for asphalt binders tested under cyclic torsion in a dynamic shear rheometer. Derivation of the model framework is presented. The model is verified by producing damage characteristic curves that are both temperature- and loading history-independent based on time sweep tests, given that the effects of plasticity and adhesion loss on the material behavior are minimal. The applicability of the S-VECD model to the accelerated loading that is inherent of the linear amplitude sweep test is demonstrated, which reveals reasonable performance predictions, but with some loss in accuracy compared to time sweep tests due to the confounding effects of nonlinearity imposed by the high strain amplitudes included in the test. The asphalt binder S-VECD model is validated through comparisons to asphalt mixture S-VECD model results derived from cyclic direct tension tests and Accelerated Loading Facility performance tests. The results demonstrate good agreement between the asphalt binder and mixture test results and pavement performance, indicating that the developed model framework is able to capture the asphalt binder's contribution to mixture fatigue and pavement fatigue cracking performance.

  19. Study on Producing Heavy Paving Asphalt

    Institute of Scientific and Technical Information of China (English)

    Liu Daosheng; Gao Zhirong; Huo Kaifu; Liao Kejian

    2002-01-01

    The highly viscous crude oil from Shuguang No. 1 zone of Liaohe oilfield features high density,high viscosity and low wax content. It contains no gasoline fraction and its diesel oil fraction yield is only 7.19%, which belongs to the low sulfur naphthenic stocks crude oil. Its heavy fraction is not suited for producing lubricating oil. Its heavy oil, which contains more resins and asphaltenes and less wax, is not an ideal feedstock for catalytic cracking, but is the ideal raw material for producing high-grade paving asphalt.Now this highly viscous crude oil is used as fuel oil after being emulsified in Liaohe oilfield, but its viscosity is so high that it cannot be atomized uniformly and burned completely, resulting not only in waste of oil resource but also in reduction of economical benefit. To make full use of this oil resource and alleviate the shortfall of high grade paving asphalt in China, various brands of asphalt meeting Q/SHR003-1998and ESSO specifications were developed by blending vacuum residue of the said oil and a blending component which are rich in aromatics and deficient in wax. The impact of blending component on properties of blended asphalt has been investigated and road performances of these blended asphalts were studied. The laboratory test results show that the blended asphalts have good road performance and antiaging property.

  20. Exposure to ultrafine particles in asphalt work.

    Science.gov (United States)

    Elihn, Karine; Ulvestad, Bente; Hetland, Siri; Wallen, Anna; Randem, Britt Grethe

    2008-12-01

    An epidemiologic study has demonstrated that asphalt workers show increased loss of lung function and an increase of biomarkers of inflammation over the asphalt paving season. The aim of this study was to investigate which possible agent(s) causes the inflammatory reaction, with emphasis on ultrafine particles. The workers' exposure to total dust, polycyclic aromatic hydrocarbons, and NO(2) was determined by personal sampling. Exposure to ultrafine particles was measured by means of particle counters and scanning mobility particle sizer mounted on a van following the paving machine. The fractions of organic and elemental carbon were determined. Asphalt paving workers were exposed to ultrafine particles with medium concentration of about 3.4 x 10(4)/cm(3). Ultrafine particles at the paving site originated mainly from asphalt paving activities and traffic exhaust; most seemed to originate from asphalt fumes. Oil mist exceeded occupational limits on some occasions. Diesel particulate matter was measured as elemental carbon, which was low, around 3 microg/m(3). NO(2) and total dust did not exceed limits. Asphalt pavers were exposed to relatively high concentrations of ultrafine particles throughout their working day, with possible adverse health effects.

  1. Operational properties of nanomodified stone mastic asphalt

    Directory of Open Access Journals (Sweden)

    Inozemtsev Sergey Sergeevich

    2015-03-01

    Full Text Available In order to prolong the lifetime and to improve the quality of pavements made of asphalt concrete it is necessary to apply innovative solutions in the process of design of such building materials. In order to solve the problem of low durability of asphalt concrete a modifier was proposed, which consists of diatomite, iron hydroxide sol (III and silica sol. Application of the diatomite with nanoscale layer of nanomodifier allows getting a stone mastic asphalt, which has high values of physical and mechanical properties and allows refusing from expensive stabilizing additive. Mineral filler was replaced by diatomite, which has been modified by iron hydroxide sol (III and silica sol. Modified diatomite allows sorption of bitumen and increase the cohesive strength and resistance to shear at positive temperatures. The modified asphalt has higher resistance to rutting at high temperature, abrasion resistance at low temperature and impact of climatic factors: alternate freezing and thawing, wetting-drying, UV and IR radiations. It is achieved by formation of solid and dense bitumen film at the phase interface and controlling the content of light fractions of the bitumen. The modifier consists of sol of iron hydroxide, which blocks the oxidation and polymerization of bitumen during operation. The proposed material allows controlling the initial structure formation of stone mastic asphalt. It was shown that modern test methods allow assessing the durability of asphalt in the design phase compositions.

  2. Mutagenicity of bitumen and asphalt fumes.

    Science.gov (United States)

    Heikkilä, P R; Väänänen, V; Hämeilä, M; Linnainmaa, K

    2003-08-01

    The mutagenicity of asphalt fumes was tested with the Salmonella bioassays. The aim was to investigate if recycled additives modify the genotoxicity of emissions. Recycling of old asphalt is increasing, and we studied also the mutagenicity of emissions sampled during the re-use of asphalt. The composition of vapours and fumes were analysed by gas chromatography and by liquid chromatography. Bitumens containing coal fly ash (CFA) or waste plastics were heated to the paving temperatures in the laboratory. In the field, bitumen fumes were collected during paving of stone mastic asphalts (lime or CFA as a filler), remixing of stone mastic asphalt (lime or CFA as a filler), and of asphalt concrete. All the lab-generated vapour fractions were non-mutagenic. The particulate fractions were mutagenic with TA98 in the presence of the S9 activation. In addition, the lab-fumes from bitumen containing waste plastics were positive with both strains without S9. Only particulate fractions sampled in the field were tested. They were mutagenic with and without metabolic activation with both strains. The mutagenic potency of the field samples was higher than that of the lab-generated fumes without S9, and the remixing fumes were more mutagenic than the normal paving and lab-generated fumes with S9. The use of inorganic additive, CFA, did not change the mutagenicity of the fumes, whereas the organic additive, waste plastics, increased the mutagenicity of the laboratory emissions significantly.

  3. Asphalt wear and pollution transport

    Energy Technology Data Exchange (ETDEWEB)

    Lindgren, Asa [Division of Traffic Engineering, Lulea University of Technology Lulea (Sweden)

    1996-09-06

    Studded tires cause extensive wear of road surfaces during winter producing small particles. Besides transporting different adsorbed pollutants these particles also discharge metal ions by their own natural content. The major part (95%) of the asphalt is composed of stone fractions. The rest consists mainly of bitumen, which contains trace quantities of metals. Laboratory studies in this study have demonstrated different adsorbing properties of metal ions, as well as differences in adsorption when comparing stone materials. Two stone materials, a gabbro and a porphyry, have been tested for their adsorption properties concerning Pb, Cu, Zn and Cd. The gabbro showed better adsorption capacity than the porphyry. Gabbro has coarser grains, it is softer, and also has a higher content of most metals compared to the porphyry. In all tests lead and copper are more adsorbed than zinc and cadmium. All metal ions are released at about the same pH ({approx}4)

  4. Effects of reclaimed asphalt pavement on indirect tensile strength test of conditioned foamed asphalt mix

    Science.gov (United States)

    Yati Katman, Herda; Rasdan Ibrahim, Mohd; Yazip Matori, Mohd; Norhisham, Shuhairy; Ismail, Norlela

    2013-06-01

    This paper presents the results of Indirect Tensile Strength (ITS) Test for samples prepared with reclaimed asphalt pavement (RAP). Samples were conditioned in water at 25°C for 24 hours prior to testing. Results show that recycled aggregate from reclaimed asphalt pavement performs as well as virgin aggregate.

  5. Strength Mechanism and Influence Factors for Cold Recycled Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    Tao Ma

    2015-01-01

    Full Text Available This study focused on the key factors affecting the tensile strength of cold recycled asphalt mixture with cement and emulsified asphalt. The specific surface areas and strength of RAP were analyzed. The interaction between the emulsified asphalt and cement was observed. Comprehensive laboratory testing was conducted to evaluate the influences of RAP, emulsified asphalt, and cement on the tensile strength of cold recycled asphalt mixture. It is found that although RAP is used as aggregates, its inner structure and strength are much different from real aggregates. The strength of RAP has decisive effect on the strength of cold recycled asphalt mixture. New aggregates and fine gradation design can help improve the bonding between RAP and binder. For emulsified asphalt, slow setting of asphalt can give sufficient time for cement to hydrate which is helpful for strength formation in the cold recycled asphalt mixture. The high viscosity of asphalt can improve the early strength of cold recycled asphalt mixture that is important for traffic opening in the field. Cement is an efficient additive to improve the strength of cold recycled asphalt mixtures by promoting demulsification of emulsified asphalt and producing cement hydrates. However, the cement content is limited by RAP.

  6. Coprocessing Yanzhou coal with petroleum resid for preparing paving asphalt

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z.; Li, Y.; Yang, J.; Liu, Z.; Chi, H. [Chinese Academy of Sciences, Taiyuan (China). State Key Laboratory of Coal Conversion

    2003-07-01

    Coprocessing Yanzhou coal with five types of petroleum resid for preparing high grade paving asphalt (HGPA) was investigated. The asphalt obtained was evaluated by 3 indexes: penetration, softening point and ductility. The thin layer chromatography (TLC) and NMR were used to characterise the asphalt. The results show that the properties of resid are crucial for the quality of asphalt. Under the experimental conditions, the resid with the lowest H/C ratio, highest aromatics content and shortest aliphatic side-chain produced asphalt with required quality for high grade paving asphalt used in China. Asphalt yield increased with H{sub 2} pressure and the quality of asphalt decreased with coal to resid ratio. 15 refs., 1 fig., 8 tabs.

  7. Theoretic computing model of combustion process of asphalt smoke

    Institute of Scientific and Technical Information of China (English)

    HUANG Rui; CHAI Li-yuan; HE De-wen; PENG Bing; WANG Yun-yan

    2005-01-01

    Based on the data and methods provided by research literature, dispersing mathematical model of combustion process of asphalt smoke is set by theoretic analysis. Through computer programming, the dynamic combustion process of asphalt smoke is calculated to simulate an experimental model. The computing result shows that the temperature and the concentration of asphalt smoke influence its burning temperature in approximatively linear manner. The consumed quantity of fuel to ignite the asphalt smoke needs to be measured from the two factors.

  8. 40 CFR 52.2054 - Control of asphalt paving material.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Control of asphalt paving material. 52... asphalt paving material. (a) Notwithstanding any provisions to the contrary in the Pennsylvania Implementation Plan, the Pennsylvania Department of Transportation shall restrict the annual usage of asphalts...

  9. Full-Depth Asphalt Pavements for Parking Lots and Driveways.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The latest information for designing full-depth asphalt pavements for parking lots and driveways is covered in relationship to the continued increase in vehicle registration. It is based on The Asphalt Institute's Thickness Design Manual, Series No. 1 (MS-1), Seventh Edition, which covers all aspects of asphalt pavement thickness design in detail,…

  10. Ethanol based foamed asphalt as potential alternative for low emission asphalt technology

    Directory of Open Access Journals (Sweden)

    Mohd Rosli Mohd Hasan

    2016-04-01

    Full Text Available Foamed asphalt typically relies on water as a foaming agent because water becomes gaseous at elevated temperatures, generating numerous tiny bubbles in the asphalt and causing spontaneous foaming. In this study, ethanol was used as a potential alternative to water as a foaming agent. Ethanol is expected to be a physical blowing agent in the same manner as water, except it requires less energy to foam due to its 78 °C boiling point. This study compares the performance of water and ethanol as foaming agents through the measurements of rotational viscosity, the reduction in temperature during foaming, and volatile loss. The ethanol-foamed asphalt binders were prepared at 80 °C and 100 °C, while the water-foamed asphalt binders were prepared at 100 °C and 120 °C. Additionally, the rolling thin film oven (RTFO was used to generate short-term aging of the foamed asphalt binders. A rotational viscometer was used to determine the viscosity of the asphalt binders at 80 °C, 100 °C, 120 °C, 140 °C, and 160 °C. Overall, ethanol can function in the same manner as water but requires less energy to foam. It is proven based on the smaller drop in temperature of the asphalt binder foamed using ethanol compared with that prepared with water. This is due to the lower latent heat capacity of ethanol, which requires less energy to vaporize compared with water. Through the rotational viscometer test, ethanol performs better in lowering the viscosity of asphalt binders, which is essential in allowing production processes at low temperatures, as well as a better workability and aggregate coating. Ethanol can be expelled from the foamed asphalt binders at a higher rate due to its lower boiling point and latent heat.

  11. Influence of reclaimed asphalt with polymer modified bitumen on properties of different asphalts for a wearing course

    NARCIS (Netherlands)

    Komačka, J.; Remišová, E.; Liu, G.; Leegwater, G.; Nielsen, E.

    2014-01-01

    A laboratory investigation was performed to study the effect of reclaimed asphalt with polymer modified bitumen on the properties describing asphalt performance. Three types of asphalts used for wearing courses in Europe (SMA 11, AC 11 and PA 8) were investigated. Five combinations of reclaimed asph

  12. Research on Alkaline Filler Flame-Retarded Asphalt Pavement

    Institute of Scientific and Technical Information of China (English)

    HU Shuguang; ZHANG Houji; WANG Jiaolan

    2006-01-01

    Used as flame retardant of tunnel asphalt pavement, organic bromides produce a large amount of poisons and smoke in construction and flame retardation stage. The alkaline filler was found to replace mineral filler, and the flame-retarded asphalt mixtures were produced. Experimental results show that these asphalt mixtures are smoke restrained; the performances and construction technology of asphalt pavement are not influenced; also the alkaline filler is of low-price. So this kind of flame-retarded asphalt mixtures is suitable for tunnel pavement.

  13. Simulation of rheological behavior of asphalt mixture with lattice model

    Institute of Scientific and Technical Information of China (English)

    杨圣枫; 杨新华; 陈传尧

    2008-01-01

    A three-dimensional(3D) lattice model for predicting the rheological behavior of asphalt mixtures was presented.In this model asphalt mixtures were described as a two-phase composite material consisting of asphalt sand and coarse aggregates distributed randomly.Asphalt sand was regarded as a viscoelastic material and aggregates as an elastic material.The rheological response of asphalt mixture subjected to different constant stresses was simulated.The calibrated overall creep strain shows a good approximation to experimental results.

  14. Thiol/disulfide homeostasis in asphalt workers.

    Science.gov (United States)

    Yilmaz, Ömer Hınç; Bal, Ceylan; Neşelioglu, Salim; Büyükşekerci, Murat; Gündüzöz, Meşide; Eren, Funda; Tutkun, Lutfiye; Yilmaz, Fatma Meric

    2016-09-02

    The aim of this study was to investigate thiol/disulfide homeostasis in asphalt workers who are exposed to polycyclic aromatic hydrocarbons occupationally. The study was carried out in 34 nonsmoker asphalt workers. Additionally, 35 healthy nonsmoker volunteers were recruited as control group. Thiol and disulfide concentrations were determined using the novel automated measurement method. Levels of urinary 1-OH-pyrene were analyzed by liquid chromatography. Disulfide/thiol ratio was significantly higher in exposed group (p = .034). Also, a positive correlation was detected between disulfide/thiol ratio and 1-OH-pyrene values (r = .249, p = .036). Thiol/disulfide homeostasis was found to be disturbed in asphalt workers. The novel test used in this study may be useful for evaluating the oxidative status in polycyclic aromatic hydrocarbon (PAH) exposure.

  15. Characteristics of asphalt mixes with FT additive

    Science.gov (United States)

    Štefunková, S.

    2012-03-01

    This article is focused on low-temperature asphalt mixture technologies using FT additive and RAP. The modern production and use of asphalt mixture technologies with reduced temperatures has many advantages. These advantages mainly help to save energy and the environment. Lower temperatures enable a reduction in energy consumption, a more acceptable working environment for workers, a reduction in negative environmental effects, such as greenhouse gas emissions, and an improvement in the workability of mixtures and a prolongation of their duration. This technology is currently becoming popular in many countries.

  16. Performance Evaluation of Stone Mastic Asphalt and Hot Mix Asphalt Mixtures Containing Recycled Concrete Aggregate

    Directory of Open Access Journals (Sweden)

    Mohammad Saeed Pourtahmasb

    2014-01-01

    Full Text Available Environmental and economic considerations have encouraged civil engineers to find ways to reuse recycled materials in new constructions. The current paper presents an experimental research on the possibility of utilizing recycled concrete aggregates (RCA in stone mastic asphalt (SMA and hot mix asphalt (HMA mixtures. Three categories of RCA in various percentages were mixed with virgin granite aggregates to produce SMA and HMA specimens. The obtained results indicated that, regardless of the RCA particular sizes, the use of RCA to replace virgin aggregates increased the needed binder content in the asphalt mixtures. Moreover, it was found that even though the volumetric and mechanical properties of the asphalt mixtures are highly affected by the sizes and percentages of the RCA but, based on the demands of the project and traffic volume, utilizing specific amounts of RCA in both types of mixtures could easily satisfy the standard requirements.

  17. Evaluation of Warm Mix Asphalt Additives for Use in Modified Asphalt Mixtures

    Science.gov (United States)

    Chamoun, Zahi

    The objective of this research effort is to evaluate the use of warm-mix additives with polymer modified and terminal blend tire rubber asphalt mixtures from Nevada and California. The research completed over two stages: first stage evaluated two different WMA technologies; Sasobit and Advera, and second stage evaluated one additional WMA technology; Evotherm. The experimental program covered the evaluation of resistance of the mixtures to moisture damage, the performance characteristics of the mixtures, and mechanistic analysis of mixtures in simulated pavements. In the both stages, the mixture resistance to moisture damage was evaluated using the indirect tensile test and the dynamic modulus at multiple freeze-thaw cycles, and the resistance of the various asphalt mixtures to permanent deformation using the Asphalt Mixture Performance Tester (AMPT). Resistance of the untreated mixes to fatigue cracking using the flexural beam fatigue was only completed for the first stage. One source of aggregates was sampled in, two different batches, three warm mix asphalt technologies (Advera, Sasobit and Evotherm) and three asphalt binder types (neat, polymer-modified, and terminal blend tire rubber modified asphalt binders) typically used in Nevada and California were evaluated in this study. This thesis presents the resistance of the first stage mixtures to permanent deformation and fatigue cracking using two warm-mix additives; Advera and Sasobit, and the resistance to moisture damage and permanent deformation of the second stage mixtures with only one warm-mix additive; Evotherm.

  18. Microstructural Analysis and Rheological Modeling of Asphalt Mixtures Containing Recycled Asphalt Materials

    Directory of Open Access Journals (Sweden)

    Augusto Cannone Falchetto

    2014-09-01

    Full Text Available The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP, and, more recently, Recycled Asphalt Shingles (RAS on the performance of asphalt pavement, while limits were proposed on the amount of recycled materials which can be used. In this paper, the effect of adding RAP and RAS on the microstructural and low temperature properties of asphalt mixtures is investigated using digital image processing (DIP and modeling of rheological data obtained with the Bending Beam Rheometer (BBR. Detailed information on the internal microstructure of asphalt mixtures is acquired based on digital images of small beam specimens and numerical estimations of spatial correlation functions. It is found that RAP increases the autocorrelation length (ACL of the spatial distribution of aggregates, asphalt mastic and air voids phases, while an opposite trend is observed when RAS is included. Analogical and semi empirical models are used to back-calculate binder creep stiffness from mixture experimental data. Differences between back-calculated results and experimental data suggest limited or partial blending between new and aged binder.

  19. Steady-State Creep of Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Alibai Iskakbayev

    2017-02-01

    Full Text Available This paper reports the experimental investigation of the steady-state creep process for fine-grained asphalt concrete at a temperature of 20 ± 2 °С and under stress from 0.055 to 0.311 MPa under direct tension and was found to occur at a constant rate. The experimental results also determined the start, the end point, and the duration of the steady-state creep process. The dependence of these factors, in addition to the steady-state creep rate and viscosity of the asphalt concrete on stress is satisfactorily described by a power function. Furthermore, it showed that stress has a great impact on the specific characteristics of asphalt concrete: stress variation by one order causes their variation by 3–4.5 orders. The described relations are formulated for the steady-state of asphalt concrete in a complex stressed condition. The dependence is determined between stress intensity and strain rate intensity.

  20. Microbial life in a liquid asphalt desert.

    Science.gov (United States)

    Schulze-Makuch, Dirk; Haque, Shirin; de Sousa Antonio, Marina Resendes; Ali, Denzil; Hosein, Riad; Song, Young C; Yang, Jinshu; Zaikova, Elena; Beckles, Denise M; Guinan, Edward; Lehto, Harry J; Hallam, Steven J

    2011-04-01

    Pitch Lake in Trinidad and Tobago is a natural asphalt reservoir nourished by pitch seepage, a form of petroleum that consists of mostly asphaltines, from the surrounding oil-rich region. During upward seepage, pitch mixes with mud and gases under high pressure, and the lighter portion evaporates or is volatilized, which produces a liquid asphalt residue characterized by low water activity, recalcitrant carbon substrates, and noxious chemical compounds. An active microbial community of archaea and bacteria, many of them novel strains (particularly from the new Tar ARC groups), totaling a biomass of up to 10(7) cells per gram, was found to inhabit the liquid hydrocarbon matrix of Pitch Lake. Geochemical and molecular taxonomic approaches revealed diverse, novel, and deeply branching microbial lineages with the potential to mediate anaerobic hydrocarbon degradation processes in different parts of the asphalt column. In addition, we found markers for archaeal methane metabolism and specific gene sequences affiliated with facultative and obligate anaerobic sulfur- and nitrite-oxidizing bacteria. The microbial diversity at Pitch Lake was found to be unique when compared to microbial communities analyzed at other hydrocarbon-rich environments, which included Rancho Le Brea, a natural asphalt environment in California, USA, and an oil well and a mud volcano in Trinidad and Tobago, among other sites. These results open a window into the microbial ecology and biogeochemistry of recalcitrant hydrocarbon matrices and establish the site as a terrestrial analogue for modeling the biotic potential of hydrocarbon lakes such as those found on Saturn's largest moon Titan.

  1. Finite element simulation of asphalt fatigue testing

    DEFF Research Database (Denmark)

    Ullidtz, Per; Kieler, Thomas Lau; Kargo, Anders

    1997-01-01

    The traditional interpretation of fatigue tests on asphalt mixes has been in terms of a logarithmic linear relationship between the constant stress or strain amplitude and the number of load repetitions to cause failure, often defined as a decrease in modulus to half the initial value. To accomod......The traditional interpretation of fatigue tests on asphalt mixes has been in terms of a logarithmic linear relationship between the constant stress or strain amplitude and the number of load repetitions to cause failure, often defined as a decrease in modulus to half the initial value....... To accomodate non-constant stress or strain, a mode factor may be introduced or the dissipated energy may be used instead of stress or strain.Cracking of asphalt (or other materials) may be described as a process consisting of three phases. In phase one diffuse microcracking is formed in the material...... damage mechanics.The paper describes how continuum damage mechanics may be used with a finite element program to explain the progressive deterioration of asphalt mixes under laboratory fatigue testing. Both constant stress and constant strain testing are simulated, and compared to the actual results from...

  2. The use of asphalt in hydraulic engineering

    NARCIS (Netherlands)

    Van de Velde, P.A.; Ebbens, E.H.; Van Herpen, J.A.

    1985-01-01

    Asphalt products have been used in the Netherlands in hydraulic engineering for a long time on a large scale, especially after the great disaster in 1953 when a large part of western Holland was flooded by the sea. After the disaster a great number of dikes had to be repaired very quickly and this w

  3. Microbial Life in a Liquid Asphalt Desert

    Science.gov (United States)

    Schulze-Makuch, Dirk; Haque, Shirin; de Sousa Antonio, Marina Resendes; Ali, Denzil; Hosein, Riad; Song, Young C.; Yang, Jinshu; Zaikova, Elena; Beckles, Denise M.; Guinan, Edward; Lehto, Harry J.; Hallam, Steven J.

    2011-04-01

    Pitch Lake in Trinidad and Tobago is a natural asphalt reservoir nourished by pitch seepage, a form of petroleum that consists of mostly asphaltines, from the surrounding oil-rich region. During upward seepage, pitch mixes with mud and gases under high pressure, and the lighter portion evaporates or is volatilized, which produces a liquid asphalt residue characterized by low water activity, recalcitrant carbon substrates, and noxious chemical compounds. An active microbial community of archaea and bacteria, many of them novel strains (particularly from the new Tar ARC groups), totaling a biomass of up to 107 cells per gram, was found to inhabit the liquid hydrocarbon matrix of Pitch Lake. Geochemical and molecular taxonomic approaches revealed diverse, novel, and deeply branching microbial lineages with the potential to mediate anaerobic hydrocarbon degradation processes in different parts of the asphalt column. In addition, we found markers for archaeal methane metabolism and specific gene sequences affiliated with facultative and obligate anaerobic sulfur- and nitrite-oxidizing bacteria. The microbial diversity at Pitch Lake was found to be unique when compared to microbial communities analyzed at other hydrocarbon-rich environments, which included Rancho Le Brea, a natural asphalt environment in California, USA, and an oil well and a mud volcano in Trinidad and Tobago, among other sites. These results open a window into the microbial ecology and biogeochemistry of recalcitrant hydrocarbon matrices and establish the site as a terrestrial analogue for modeling the biotic potential of hydrocarbon lakes such as those found on Saturn's largest moon Titan.

  4. Performance of Recycled Porous Hot Mix Asphalt with Gilsonite Additive

    Directory of Open Access Journals (Sweden)

    Ludfi Djakfar

    2015-01-01

    Full Text Available The objective of the study is to evaluate the performance of porous asphalt using waste recycled concrete material and explore the effect of adding Gilsonite to the mixture. As many as 90 Marshall specimens were prepared with varied asphalt content, percentage of Gilsonite as an additive, and proportioned recycled and virgin coarse aggregate. The test includes permeability capability and Marshall characteristics. The results showed that recycled concrete materials seem to have a potential use as aggregate in the hot mix asphalt, particularly on porous hot mix asphalt. Adding Gilsonite at ranges 8–10% improves the Marshall characteristic of the mix, particularly its stability, without decreasing significantly the permeability capability of the mix. The use of recycled materials tends to increase the asphalt content of the mix at about 1 to 2% higher. With stability reaching 750 kg, the hot mix recycled porous asphalt may be suitable for use in the local roads with medium vehicle load.

  5. Mechanical properties of gutta-percha sulfide modified asphalt

    Science.gov (United States)

    Zou, X. Y.; Gu, X. Y.; Wang, X. W.

    2017-01-01

    Gutta-percha is the isomer of caoutchouc and can be used to enhance the performance of asphalt. In this paper, the produce proceedings of gutta-percha sulfide and gutta-percha sulfide modified asphalt are introduced. The performance indices of gutta-percha sulfide modified asphalt samples with different proportions are examined based on laboratory tests and the optimum ratio of gutta-percha and sulfur is decided.The micromechanism, temperature sensitivity, high and low temperature properties and viscoelasticity of the polymer modified asphalt are analyzed to discuss the modified mechanism and to decide the optimal polymer content. Low temperature bending tests are carried out to verify the low temperature performance of gutta-percha sulfide modified asphalt mixture. Research results showed that gutta-percha sulfide modified asphalt has good low temperature performance and a promising application prospect in the cold regions.

  6. Percolation Model of Graphite-modified Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    MO Liantong; WU Shaopeng; LIU Xiaoming; CHEN Zheng

    2005-01-01

    The addition of graphite powder in conventional asphalt mixture can produced asphalt concrete with excellent electrical performance. Percolation theory was employed to discuss the relation between the conductivity and graphite content of graphite-modified asphalt concrete. It was found that the results of percolation model are consistent with experimental values. The percolation threshold of graphite-modified asphalt concrete is 10.94% graphite content account for the total volume of the binder phase consisting of asphalt and graphite. The critical exponent is 3.16, beyond the range of 1.6-2.1 for the standard lattice continuous percolation problem. Its reason is that the tunnel conduction mechanism originates near the critical percent content, which causes this system to be not universal. Tunnel mechanism is demonstrated by the nonlinear voltage-current characteristic near percolation threshold.The percolation model is able to well predict the formation and development of conductive network in graphite-modified asphalt concrete.

  7. Viscoelastic Analysis of Asphalt Mixture Based on Creep Test

    Directory of Open Access Journals (Sweden)

    Lihua Zhao

    2013-01-01

    Full Text Available Two kinds of mineral fibers were added to AC-16C asphalt mixture. Trabecular bending creep experiments of asphalt mixtures were carried out at -10 and 20°C. The influence of mineral fibers on the low temperature viscoelasticity of asphalt mixtures were analyzed systemically. Furthermore, by using Origin, Burgers viscoelastic model was used to investigate the parameter regression for the creep test results at the different temperatures. The results show that the addition of mineral fibers can effectively improve the bending creep rate of asphalt mixtures, indicates the increase of crack resistance of asphalt mixtures. Good agreement between experimental data and Burgers model was found. The parameters of Burgers model at different temperatures can also provide data support for the viscoelastic design of asphalt pavements.

  8. An Improvement in Electrical Properties of Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; MO Lian-tong; SHUI Zhong-he; XUAN Dong-xing; XUE Yong-jie; YANG Wen-feng

    2002-01-01

    Materials such as Koch AH - 70, basalt aggregate, limestone powder and graphite particles were used to prepare conductive asphalt concrete, which is a new type of multi functional concrete. The mix proportion by weight was shown as follows. Fineaggregates (2.36-4.75 mm):fine aggregates (< 2.36mm): limestone powder: asphalt = 120:240: 14:30. The content of added graphite particles ranged from 0% to 20% ( by the Special weight of asphalt concerte). A conductive asphalt concrete with a resistivity around 10-103·Ωm was obtained.attention was paid to the effects of graphite content, graphite physical-chemical properties, asphalt content and temperature on the resistivity. Furthermore, an attempt was made to develop an electrically conductive model for asphalt concrete.

  9. Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers

    Directory of Open Access Journals (Sweden)

    Byong Chol Bai

    2015-01-01

    Full Text Available This paper investigates the thermal properties of asphalt mixtures modified with conductive fillers used for snow melting and solar harvesting pavements. Two different mixing processes were adopted to mold asphalt mixtures, dry- and wet-mixing, and two conductive fillers were used in this study, graphite and carbon black. The thermal conductivity was compared to investigate the effects of asphalt mixture preparing methods, the quantity, and the distribution of conductive filler on thermal properties. The combination of conductive filler with carbon fiber in asphalt mixture was evaluated. Also, rheological properties of modified asphalt binders with conductive fillers were measured using dynamic shear rheometer and bending beam rheometer at grade-specific temperatures. Based on rheological testing, the conductive fillers improve rutting resistance and decrease thermal cracking resistance. Thermal testing indicated that graphite and carbon black improve the thermal properties of asphalt mixes and the combined conductive fillers are more effective than the single filler.

  10. Porous Flame-retarded Asphalt Pavement for Highway Tunnel

    Institute of Scientific and Technical Information of China (English)

    HU Shuguang; HUANG Shaolong; Ding Qingjun

    2008-01-01

    A new way to improve the tunnel fire protection by using flame-retarded porous asphalt pavement containing ATH powders was introduced. Based on the miniature burning test designed and conducted, the burning time and temperature of porous asphalt (PA) and flame-retarded porous asphalt (FRPA) were studied comparing with cement concrete pavement, dense-graded HMA and S MA. Results of burning test and pavement performance test indicate that FRPA is appropriate and suitable as the pavement material of highway tunnel.

  11. Bone Glue Modified Asphalt: A Step towards Energy Conservation and Environment Friendly Modified Asphalts.

    Science.gov (United States)

    Rizvi, Hashim Raza; Khattak, Mohammad Jamal; Gallo, August A

    2014-01-01

    Asphalt has been modified for the past several decades using various additives, including synthetic polymers. Polymer modification improves structural and engineering characteristics of the binder, which is a result of improvement in rheological characteristics of binder as well as its adhesion capability with the aggregate. Such enhancement inevitably enhances the performance characteristics of hot mix asphalts (HMA) such as fatigue life, resistance to rutting, and thermal cracking. Even though polymer-modified HMA is popular in North America and European countries, its use is still limited in developing countries of Southeast Asia due to high costs associated with its manufacturing, processing, and energy consumption. In this study, a new kind of asphalt modifier derived from animal wastes, such as bones, hides, and flesh commonly known as Bone Glue, is studied. This biomaterial which is a by-product of food and cattle industries is cheap, conveniently available, and produced locally in developing countries. The results of the research study showed that the bone glue can easily be mixed with asphalt without significantly altering the asphalt binder's viscosity and mixing and compaction temperatures of HMA. Additionally, improvements in complex shear modulus for a range of temperatures were also determined and it was found that complex shear modulus was improved by bone glue modification.

  12. Detection of asphalt pavement cracks using remote sensing techniques

    Science.gov (United States)

    Mettas, Christodoulos; Agapiou, Athos; Themistocleous, Kyriacos; Neocleous, Kyriacos; Hadjimitsis, Diofantos G.

    2016-10-01

    Deterioration of asphalt road pavements is inevitable throughout its life cycle. There are several types of deterioration that take place on these surfaces, like surface defects and deformations. One of the most common asphalt defects is cracking. Fatigue, transverse, longitudinal, reflective, edge, block and slippage are types of cracking that can be observed anywhere in the world. Monitoring and preventative/periodic maintenance of these types of wears are two very important actions that have to take place to avoid "costly" solutions. This paper aims to introduce the spectral characteristics of uncracked (healthy) and cracked asphalt surfaces which can give a new asphalt crack index. This is performed through remote sensing applications in the area of asphalt pavements. Multispectral images can be elaborated using the index to enhance crack marks on asphalt surfaces. Ground spectral signatures were acquired from both uncracked and cracked asphalted areas of Cyprus (Limassol). Evaluation separability indices can be used to identify the optimum wavelength regions that can distinguish better the uncracked and cracked asphalt surfaces. The results revealed that the spectral sensitivity for the enhancement of cracked asphalt was detected using the Euclidean, Mahalanobis and Cosine Distance Indices in the Vis range (approximately at 450 nm) and in the SWIR 1 range (approximately at 1750 nm).

  13. Creep Characteristics of Crumb Rubber Modified Asphalt Binder

    Institute of Scientific and Technical Information of China (English)

    WANG Lan; CHANG Chunqing; XING Yongming

    2011-01-01

    Crumb rubber modified asphalt containing 20 percent crumb rubber particles of 30mesh has been examined by Scanning Electron Microscope (SEM) to observe the microcosmic appearance and the characteristic distribution of crumb rubber particles in asphalt. The SEM pictures reveal that the crumb rubber particles distribute evenly in the asphalt and they are compatible well with asphalt. The shear creep test of crumb rubber modified asphalt was carried out at - 10 ℃ and 40 ℃ by Dynamic Shear Rheology (DSR). The shearing deformation at different temperature and creep stiffness modulus curve at loading stage of crumb rubber modified asphalt have been measured. The stiffness modulus of crumb rubber modified asphalt is much temperature sensitive and it decays much quick at the early stage of loading than normal asphalt. The rate of decay of stiffness modulus is slow at the subsequent stage and stiffness modulus approaches to a stable value at the final stage at a higher temperature. In addition, Burgers model is suitable to describe and simulate experimental results of viscoelastic properties of the crumb rubber modified asphalt.

  14. Hanford Permanent Isolation Barrier Program: Asphalt technology development

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.

    1994-11-01

    An important component of the Hanford Permanent Isolation Barrier is the use of a two-layer composite asphalt system, which provides backup water diversion capabilities if the primary capillary barrier fails to meet infiltration goals. Because of asphalt`s potential to perform to specification over the 1000-year design life criterion, a composite asphalt barrier (HMAC/fluid-applied polymer-modified asphalt) is being considered as an alternative to the bentonite clay/high density poly(ethylene) barriers for the low-permeability component of the Hanford Permanent Isolation Barrier. The feasibility of using asphalt as a long-term barrier is currently being studied. Information that must be known is the ability of asphalt to retain desirable physical properties over a period of 1000 years. This paper presents the approach for performing accelerated aging tests and evaluating the performance of samples under accelerated conditions. The results of these tests will be compared with asphalt artifact analogs and the results of modeling the degradation of the selected asphalt composite to make life-cycle predictions.

  15. Effects of reclaimed asphalt pavement on indirect tensile strength test of foamed asphalt mix tested in dry condition

    Science.gov (United States)

    Yati Katman, Herda; Rasdan Ibrahim, Mohd; Yazip Matori, Mohd; Norhisham, Shuhairy; Ismail, Norlela

    2013-06-01

    Indirect tensile strength (ITS) test was conducted to analyse strength of the foamed asphalt mixes incorporating reclaimed asphalt pavement. Samples were tested for ITS after cured in the oven at 40°C for 72 hours. This testing condition known as dry condition or unconditioned. Laboratory results show that reclaimed asphalt pavement (RAP) contents insignificantly affect the ITS results. ITS results significantly affected by foamed bitumen contents.

  16. Ethanol based foamed asphalt as potential alternative for low emission asphalt technology

    OpenAIRE

    Mohd Rosli Mohd Hasan; Zhanping You

    2016-01-01

    Foamed asphalt typically relies on water as a foaming agent because water becomes gaseous at elevated temperatures, generating numerous tiny bubbles in the asphalt and causing spontaneous foaming. In this study, ethanol was used as a potential alternative to water as a foaming agent. Ethanol is expected to be a physical blowing agent in the same manner as water, except it requires less energy to foam due to its 78 °C boiling point. This study compares the performance of water and ethanol as f...

  17. Including asphalt cooling and rolling regimes in laboratory compaction procedures

    NARCIS (Netherlands)

    Bijleveld, F.R.; Doree, A.G.; Kim,

    2014-01-01

    Given the various changes occurring in the asphalt construction industry, improved process and quality control is becoming essential. The significance of appropriate rolling and compaction for the quality of asphalt is widely acknowledged and vital for improved process control. But what constitutes

  18. Crack repair of asphalt concrete with induction energy

    NARCIS (Netherlands)

    García, A.; Schlangen, E.; Ven, M. van de; Vliet, D. van

    2011-01-01

    It is well known that the healing rates of asphalt courses increase with the temperature. A new method, induction heating, is used in this paper to increase the lifetime of asphalt concrete pavements. Mastic will be first made electrically conductive by the addition of conductive fibers. Then it wil

  19. Crack repair of asphalt concrete with induction energy

    NARCIS (Netherlands)

    García, A.; Schlangen, E.; Van de Ven, M.; Van Vliet, D.

    It is well known that the healing rates of asphalt courses increase with the temperature. A new method, induction heating, is used in this paper to increase the lifetime of asphalt concrete pavements. Mastic will be first made electrically conductive by the addition of conductive fibers. Then it wil

  20. 7 CFR 2902.36 - Concrete and asphalt release fluids.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Concrete and asphalt release fluids. 2902.36 Section... PROCUREMENT Designated Items § 2902.36 Concrete and asphalt release fluids. (a) Definition. Products that are designed to provide a lubricating barrier between the composite surface materials (e.g., concrete...

  1. Characterization of Failure and Permanent Deformation Behaviour of Asphalt Concrete

    NARCIS (Netherlands)

    Wang, J.G.

    2015-01-01

    Asphalt concrete is a viscoelastic material consisting of aggregates, filler and bitumen. The response of asphalt concrete is highly dependent on temperature, loading rate and confining pressure. Permanent deformation is one of the most important distresses developing during the flexible pavement se

  2. Hot asphalt burns: a review of injuries and management options.

    Science.gov (United States)

    Bosse, George M; Wadia, Shernaz A; Padmanabhan, Pradeep

    2014-07-01

    Hot asphalt burns to human tissue can increase the likelihood of infection and potential conversion of partial thickness to full-thickness injuries. Successful intervention for hot asphalt burns requires immediate and effective cooling of the asphalt on the tissue followed by subsequent gradual removal of the cooled asphalt. A review of the literature reveals that multiple substances have been used to remove asphalt, including topical antibiotics, petroleum jelly, a commercial product known as De-Solv-It (ORANGE-SOL, Chandler, AZ), sunflower oil, baby oil, liquid paraffin, butter, mayonnaise, and moist-exposed burn ointment (MEBO). Although many of these products may be effective in the removal of asphalt, they may not be readily available in an emergency department setting. Topical antibiotics are readily available, are more commonly described in the medical literature, and would be expected to be effective in the removal of asphalt. We developed guidelines for on scene (first-aid) management and the initial care of such patients upon presentation to a health care facility. These guidelines emphasize the principles of early cooling, gradual removal of adherent asphalt using topical antibiotics, and avoidance of the use of topical agents, which are likely to result in tissue toxicity.

  3. Stabilization/solidification of munition destruction waste by asphalt emulsion.

    Science.gov (United States)

    Cervinkova, Marketa; Vondruska, Milan; Bednarik, Vratislav; Pazdera, Antonin

    2007-04-02

    Destruction of discarded military munitions in an explosion chamber produces two fractions of hazardous solid waste. The first one is scrap waste that remains in the chamber after explosion; the second one is fine dust waste, which is trapped on filters of gas products that are exhausted from the chamber after explosion. The technique of stabilization/solidification of the scrap waste by asphalt emulsion is described in this paper. The technique consists of simple mixing of the waste with anionic asphalt emulsion, or two-step mixing of the waste with cationic asphalt emulsion. These techniques are easy to use and the stabilized scrap waste proves low leachability of contained heavy metals assessed by TCLP test. Hence, it is possible to landfill the scrap waste stabilized by asphalt emulsion. If the dust waste, which has large specific surface, is stabilized by asphalt emulsion, it is not fully encapsulated; the results of the leaching tests do not meet the regulatory levels. However, the dust waste solidified by asphalt emulsion can be deposited into an asphalted disposal site of the landfill. The asphalt walls of the disposal site represent an efficient secondary barrier against pollutant release.

  4. Laboratory and Field Asphalt Fatigue Performance, Matching Theory with Practice

    NARCIS (Netherlands)

    Pramesti, F.P.

    2015-01-01

    This thesis investigates the relationship between predicted and observed fatigue life of asphalt. This study also investigates the positive effects of modifying bitumen with Retona, a bitumen modifier produced in Indonesia from natural asphalt rock sources, on pavement performance in terms of increa

  5. Durability ofAsphalt in Different Corrosion Solution

    Institute of Scientific and Technical Information of China (English)

    CHEN Shuanfa; GUAN Bowen; XIONG Rui; SHENG Yanping; HE Rui

    2011-01-01

    The corrosion to asphalt mixture under different kinds of corrosion solution,such as pH=2 solution,pH=12 solution,pH =12 solution and 10% Na2SO4 solution,was studied.The performance attenuation of asphalt mixture was analyzed under the normal environment and the freeze-thaw environment,and the analysis was given on the sensitivity of the test results to the evaluation index.The experimental results show that the performance of asphalt mixture is attenuated faster under the acidic solution,alkaline solution and sulfate solution.Corrosion factor Kc,freeze-thaw corrosion factor Kf,and freeze-thaw effect factor Kfc are proposed to evaluate asphalt mixture resistance to corrosion in different kinds of corrosion solution.The values of Kc and Kfc decrease with the increasing of corrosion time.The change rule of Kf show that the rate of corrosion is decreased by the action of freeze-thaw in acidic solution and in alkaline solution,but is increased by the action of freeze-thaw in sulfate solution.The microscopic analysis indicates that acid solution reacts with aggregate of asphalt mixture,alkaline solution reacts with asphalt cement of asphalt mixture,the surface tension of sulfate solution and crystallization of sulfate are the main reasons which weak the performance of asphalt mixture.

  6. 40 CFR 443.40 - Applicability; description of the linoleum and printed asphalt felt subcategory.

    Science.gov (United States)

    2010-07-01

    ... linoleum and printed asphalt felt subcategory. 443.40 Section 443.40 Protection of Environment... PAVING AND ROOFING MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Linoleum and Printed Asphalt Felt Subcategory § 443.40 Applicability; description of the linoleum and printed asphalt felt subcategory....

  7. 40 CFR 443.30 - Applicability; description of the asphalt roofing subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphalt roofing subcategory. 443.30 Section 443.30 Protection of Environment ENVIRONMENTAL PROTECTION... MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Roofing Subcategory § 443.30 Applicability; description of the asphalt roofing subcategory. The provisions of this subpart are applicable to...

  8. 40 CFR 443.20 - Applicability; description of the asphalt concrete subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphalt concrete subcategory. 443.20 Section 443.20 Protection of Environment ENVIRONMENTAL PROTECTION... MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Concrete Subcategory § 443.20 Applicability; description of the asphalt concrete subcategory. The provisions of this subpart are applicable to...

  9. 40 CFR Table 1 of Subpart Aaaaaaa... - Emission Limits for Asphalt Processing (Refining) Operations

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false Emission Limits for Asphalt Processing... Area Sources: Asphalt Processing and Asphalt Roofing Manufacturing Other Requirements and Information... of Part 63—Emission Limits for Asphalt Processing (Refining) Operations For * * * You must meet...

  10. 40 CFR 443.10 - Applicability; description of the asphalt emulsion subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphalt emulsion subcategory. 443.10 Section 443.10 Protection of Environment ENVIRONMENTAL PROTECTION... MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Emulsion Subcategory § 443.10 Applicability; description of the asphalt emulsion subcategory. The provisions of this subpart are applicable to...

  11. Thermal Conduction and Insulation Modification in Asphalt-Based Composites

    Institute of Scientific and Technical Information of China (English)

    Xiaofeng Zhou; Shengyue Wang; Chao Zhou

    2012-01-01

    The relationship between thermal conductivity and properties of mixing particles is required for quantitative study of heat transfer processes in asphalt-based materials. In this paper, we measured the e?ective ther- mal conductivity of asphalt-based materials with thermal conduction (graphite) and insulation (cenosphere) powders modification. By taking account of the particle shape, volume fraction, the thermal conductivity of filling particles and base asphalt, we present a new differential effective medium formula to predict the thermal conductivity modification in asphalt-based composite. Our theoretical predications are in good agreement with the experiment data. The new model can be applied for predicting the thermal properties of asphalt-based mixture, which is available for most of thermal modification in two-phase composites.

  12. Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

    Directory of Open Access Journals (Sweden)

    Bo Li

    2014-01-01

    Full Text Available Improving the compatibility between flame retardant and asphalt is a difficult task due to the complex nature of the materials. This study explores a low dosage compound flame retardant and seeks to improve the compatibility between flame retardants and asphalt. An orthogonal experiment was designed taking magnesium hydroxide, ammonium polyphosphate, and melamine as factors. The oil absorption and activation index were tested to determine the effect of titanate on the flame retardant additive. The pavement performance test was conducted to evaluate the effect of the flame retardant additive. Oxygen index test was conducted to confirm the effect of flame retardant on flame ability of asphalt binder. The results of this study showed that the new composite flame retardant is more effective in improving the compatibility between flame retardant and asphalt and reducing the limiting oxygen index of asphalt binder tested in this study.

  13. Mechanical Properties of Asphalt Pavement Structure in Highway Tunnel

    Institute of Scientific and Technical Information of China (English)

    SHI Chun-xiang; GUO Zhong-yin

    2008-01-01

    A linear full 3D finite element method (FEM) was performed in order to present the key design parameters of highway tunnel asphalt pavement under double-wheel load on rectangular loaded area considering horizontal contact stress induced by the acceleration/deceleration of vehicles. The key design parameters are the maximum horizontal tensile stresses at the surface of the asphalt layer, the maximum horizontal tensile stresses at the bottom of the asphalt layer and the maximum vertical shear stresses at the surface of the as- phalt layer were calculated. The influencing factors such as double-wheel weight; asphalt layer thickness; base course stiffness modulus and thickness; and the contact conditions among the structure layers on these key design parameters were also examined separately to propose construction procedures of highway tunnel asphalt pavement.

  14. Effect of ageing on fatigue properties of asphalt

    Institute of Scientific and Technical Information of China (English)

    王佶; 庞凌; 吴少鹏; 刘全涛; 陈筝

    2008-01-01

    The fatigue properties of asphalts were investigated after various laboratory simulation ageing tests and outdoor natural exposure ultraviolet radiation ageing,by dynamic shear rheometer(DSR) time sweep fatigue test in constant strain model and a new type of specimen which was introduced to avoid the problem of adhesion failure between rotor and asphalt binder.The results show that outdoor natural exposure ageing(NEA) causes the decrease of retained fatigue life distinctly,and photodegradation caused by outdoor NEA of 1 250 μm thin films asphalt for three months,is found to be severer than pressure ageing vessel(PAV) with respects to retained fatigue life.The effect of photodegradation increases as the time of outdoor NEA increases.DSR time sweep fatigue test in constant strain indicates that the aged styrene-butadiene-styrene(SBS) modified asphalt still displays better fatigue properties than the corresponding base asphalt after ageing.

  15. THE FATIGUE DURABILITY OF THE MODIFIED ASPHALT CONCRETE UNDER THE EFFECT OF INTENSIVE TRAFFIC LOADS

    Directory of Open Access Journals (Sweden)

    Yuri KALGIN

    2016-06-01

    Full Text Available The problem of prediction of the service life of asphalt concrete surface constructed with modified asphalt concrete application onto a traffic lane is examined. Asphalt concrete behaviour in road surface under the traffic loads was analysed. There were shown The results of experiments and their mathematical analysis of the assessment of standard and modified cold asphalt concrete fatigue life on road surface were shown. The service life of an asphalt concrete surface covered with standard and modified cold asphalt concrete is examined. The prediction has been received with an account of stress relaxation processes in asphalt concrete pavement and unevenness of traffic load application.

  16. Utilization of recycled asphalt concrete with warm mix asphalt and cost-benefit analysis.

    Science.gov (United States)

    Oner, Julide; Sengoz, Burak

    2015-01-01

    The asphalt paving industries are faced with two major problems. These two important challenges are generated with an increase in demand for environmentally friendly paving mixtures and the problem of rapidly rising raw materials. Recycling of reclaimed asphalt pavement (RAP) is a critical necessity to save precious aggregates and reduce the use of costly bitumen. Warm Mix Asphalt (WMA) technology provides not only the option of recycling asphalt pavement at a lower temperature than the temperature maintained in hot mixtures but also encourages the utilization of RAP and therefore saves energy and money. This paper describes the feasibility of utilizing three different WMA additives (organic, chemical and water containing) at recommended contents with different percentages of RAP. The mechanical properties and cost-benefit analysis of WMA containing RAP have been performed and compared with WMA without RAP. The results indicated that, 30%, 10% and 20% can be accepted as an optimum RAP addition related to organic, chemical and water containing additives respectively and organic additive with 30% RAP content has an appreciable increase in tensile strength over the control mix. It was also concluded that the RAP with WMA technology is the ability to reduce final cost compared to HMA and WMA mixtures.

  17. Utilization of recycled asphalt concrete with warm mix asphalt and cost-benefit analysis.

    Directory of Open Access Journals (Sweden)

    Julide Oner

    Full Text Available The asphalt paving industries are faced with two major problems. These two important challenges are generated with an increase in demand for environmentally friendly paving mixtures and the problem of rapidly rising raw materials. Recycling of reclaimed asphalt pavement (RAP is a critical necessity to save precious aggregates and reduce the use of costly bitumen. Warm Mix Asphalt (WMA technology provides not only the option of recycling asphalt pavement at a lower temperature than the temperature maintained in hot mixtures but also encourages the utilization of RAP and therefore saves energy and money. This paper describes the feasibility of utilizing three different WMA additives (organic, chemical and water containing at recommended contents with different percentages of RAP. The mechanical properties and cost-benefit analysis of WMA containing RAP have been performed and compared with WMA without RAP. The results indicated that, 30%, 10% and 20% can be accepted as an optimum RAP addition related to organic, chemical and water containing additives respectively and organic additive with 30% RAP content has an appreciable increase in tensile strength over the control mix. It was also concluded that the RAP with WMA technology is the ability to reduce final cost compared to HMA and WMA mixtures.

  18. Surface Modification of Fire-retardant Asphalt with Silane Coupling Agent

    Institute of Scientific and Technical Information of China (English)

    CHEN Huiqiang; TANG Boming

    2012-01-01

    The theory and approach of the surface modified of asphalt fire-retardant with silane coupling agent were introduced,The optimum silane dosage was determined,and the structure and properties of the asphalt fire-retardant before and after the surface modification were characterized by infrared spectrum and thermo gravimetric analysis.The dispersion effect of asphalt fire-retardant was studied.The influence of the surface modification on the hydrophilicity and lipophilicity of the asphalt fire-retardant was analyzed.The experimental results showed that there were physical and chemical interactions between the silane coupling agent and the asphalt fire-retardant,which reduced the surface polarity of the asphalt fire retardant.The optimum silane coupling agent dosage was 0.95% of the asphalt fire retardant.The surface modification improved the thermal stability,dispersibility and lipophilicity of the asphalt fire retardant,which enhanced the compatibility between asphalt fire retardant and asphalt.

  19. Evaluation of Warm Mix Asphalt Technologies and Recycled Asphalt Pavements in Truckee Meadows, Nevada

    Science.gov (United States)

    Diaz Montecino, Cristian

    This study evaluated the properties and laboratory-performance of Hot Mix Asphalt (HMA) and Warm Mix Asphalt (WMA) mixtures with different levels of Recycled Asphalt Pavements (RAP) content: none for control mixtures, around 15% by dry weight of aggregates, and more than 30% by dry weight of aggregates. The rheological properties were evaluated for virgin and recovered RAP asphalt binders. The target amount of RAP in the mixtures was determined by using Blending Charts and Mortar Experiments. The mixtures are design through the guidelines established in Marshall Mix Design Method considering additional modifications for RAP and WMA from Superpave Mix Design. The mixtures are evaluated for their resistance to moisture damage by means of measuring the Dynamic Modulus |E*| after three freeze/thaw cycles and the indirect tensile strength after one and three freeze/thaw cycles. The resistance of the mixtures to permanent deformation was also evaluated by using the Asphalt Mixture Performance Tester (AMPT) to measure the flow number (FN). For this study, it was determined that the resistance to moisture damage decreases as the number of freeze/thaw cycles increases for most of the evaluated mixtures. Mixtures exhibited an increase in dynamic modulus as the RAP percentage increased. A decrease in the resistance to moisture damage was detected with the increase in RAP content for most of the mixtures. HMA mixtures exhibited a better performance in rutting than the WMA mixtures. An increase in rutting resistance was observed with the increase in RAP percentage for HMA mixtures whereas an inconsistent trend was observed for WMA mixtures. Further study is needed to validate the use of the high percentage of RAP in Washoe County.

  20. Research on Performance of Asphalt Modified by Polyethylene Made from Recycled Plastics%废旧塑料合成MPE颗粒对沥青改性效果的试验研究

    Institute of Scientific and Technical Information of China (English)

    王家主

    2011-01-01

    Granular modified polyethylene made from recycled plastics and tackifier can be added to asphalt mix plant to modify asphalt, which avoids the process of modifying asphalt in the factory. Two virgin asphalts, with their four components content tested, are chosen to study the MPE modified asphalt. Asphalts with different quantities of MPE are prepared by high speed shearing machine. And asphalt performance of every sample is tested, which varied with different MPE content, meanwhile, curves of performance versus MPE content are drawn. Last, all the test results and analysis indicate that MPE can obviously improve asphalt performances such as high temperature performance, aging resistance and anti-stripping. However, there is an optimal MPE content which is 6% of asphalt mass.%采用废旧塑料和增黏剂合成的MPE颗粒,可在道路沥青混合料拌和时直接投入,起到对道路沥青改性的作用,省去了在加工厂制备生产改性沥青的过程.为研究MPE对沥青的改性作用,选取两种基质沥青,测定其四组分含量,通过高速剪切设备制备不同MPE掺量的改性沥青,分别对其进行沥青性能的检测,绘制各项沥青性能随MPE掺量的变化曲线.试验结果表明,MPE对沥青的高温、老化和水稳定性能具有明显的改善作用,同时MPE存在一个最佳掺量,约为沥青质量的6%.

  1. Microbial Life in a Liquid Asphalt Desert

    CERN Document Server

    Schulze-Makuch, Dirk; Antonio, Marina Resendes de Sousa; Ali, Denzil; Hosein, Riad; Song, Young C; Yang, Jinshu; Zaikova, Elena; Beckles, Denise M; Guinan, Edward; Lehto, Harry J; Hallam, Steven J

    2010-01-01

    An active microbiota, reaching up to 10 E+7 cells/g, was found to inhabit a naturally occurring asphalt lake characterized by low water activity and elevated temperature. Geochemical and molecular taxonomic approaches revealed novel and deeply branching microbial assemblages mediating anaerobic hydrocarbon degradation, metal respiration and C1 utilization pathways. These results open a window into the origin and adaptive evolution of microbial life within recalcitrant hydrocarbon matrices, and establish the site as a useful analog for the liquid hydrocarbon environments on Saturn's moon Titan.

  2. Evaluation of Hydrated Lime Filler in Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Mohammed Abbas Hasan Al-Jumaily

    2008-01-01

    Full Text Available Mineral filler is one of important materials and affecting on properties and quality of asphalt mixtures .There are different types of mineral filler depended on cost and quality , the matter encourages us to achieve this study to evaluate hydrated lime filler effects on properties of asphalt mixes related with strength and durability. Conventional asphaltic concrete mixtures with Portland cement and soft sandstone fillers and mixtures modified with hydrated lime were evaluated for their fundamental engineering properties as defined by Marshall properties , index of retained strength , indirect tensile strength , permanent deformation characteristics , and fatigue resistance .A typical dense graded mixture employed in construction of surface course pavement in Iraq in accordance with SCRB specifications was used .The materials used in this study included mineral aggregate materials (coarse and fine sizes were originally obtained from Najaf Sea quarries and two grades of asphalt cements produced from Daurah refinery which are D47 and D66 . The physical properties , stiffness modulus and chemical composition are evaluated for the recovered asphalt cement from prepared asphalt mixes containing various filler types .The paper results indicated that the addition of hydrated lime as mineral filler improved the permanent deformation characteristics and fatigue life and the use of hydrated lime will decrease the moisture susceptibility of the asphalt mixtures.

  3. Study on the hardening mechanism of cement asphalt binder

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The hydration and hardening mechanism of cement asphalt binder(CAB) was studied.The early hydration process,hydration products and paste microstructure of CAB made by Portland cement and anionic asphalt emulsion were investigated by calorimetry,X-ray diffraction,and environmental scanning electron microscopy.The early hydration process of CAB can be characterized as 5 stages similar to those of Portland cement.There is no chemical reaction detected between cement and asphalt,hence no new hydration products other than those of Portland cement are produced.The hardening of CAB begins with the hydration of cement.When the hydration of cement comes into the acceleration period and its exothermic rate comes to the maximum,the coalescence of asphalt particles in asphalt emulsion is triggered.In the hardened system of CAB,it was found that the hydration products of cement form the skeleton and are covered by the continuous asphalt film.They formed an interpenetrating network system.The emulsifiers in the asphalt emulsion may retard the hydration process of cement.

  4. Effect of fiber types on relevant properties of porous asphalt

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; LIU Gang; MO Lian-tong; CHEN Zheng; YE Qun-shan

    2006-01-01

    The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes,using the tests of draindown,abrasion,volumetric properties,rutting,and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter (G*/sinδ) of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon Mohr-Coulomb theory,the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore,they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis,cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.

  5. Low permeability asphalt concrete gamma ray shielding properties.

    Science.gov (United States)

    Binney, S E; Sykes, K L

    1997-01-01

    Energy-dependent gamma ray shielding properties were measured as a function of gamma ray energy for a low permeability asphalt concrete that is used as a cap to prevent water infiltration into radioactive waste sites. Experimental data were compared to ISO-PC point kernel shielding calculations. Calculated dose equivalent rates compared well with experimental values, especially considering the poor detector resolution involved. The shielding properties of the asphalt concrete closely resembled those of aluminum. The results presented can be used to determine the asphalt concrete thickness required to reduce dose equivalent rates from several gamma ray emitting radionuclides.

  6. Influence of conductive additive on temperature susceptibility of asphalt binders

    Institute of Scientific and Technical Information of China (English)

    吴少鹏; 李波; 陈筝; 黄旭

    2008-01-01

    The effects of graphite on temperature susceptibility of asphalt binders were investigated by penetration test,Ring & Ball softening point test and viscosity test.And penetration index(IP),viscosity-temperature susceptibility(SVT),and penetration-viscosity numbers(NPV) were introduced to evaluate the effects.The results show that the penetration,softening point and viscosity of asphalt binder increase with the increase of content of graphite.This means that the addition of graphite makes asphalts stiffer.The results from IP,NPV and SVT show that temperature susceptibility is reduced by the addition of graphite.

  7. Discrete Element Simulation of Asphalt Mastics Based on Burgers Model

    Institute of Scientific and Technical Information of China (English)

    LIU Yu; FENG Shi-rong; HU Xia-guang

    2007-01-01

    In order to investigate the viscoelastic performance of asphalt mastics, a micro-mechanical model for asphalt mastics was built by applying Burgers model to discrete element simulation and constructing Burgers contact model. Then the numerical simulation of creep tests was conducted, and results from the simulation were compared with the analytical solution for Burgers model. The comparision snowed that the two results agreed well with each other, suggesting that discrete element model based on Burgers model could be employed in the numerical simulation for asphalt mastics.

  8. 信息动态%A Research on the Pavement Performance of Warm Mix Buton Mastic Asphalt

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Compositing modified asphalt mixture is a kind of asphalt mixture which uses Buton Mastic Asphalt(BMA) and warm modifier compound modification. It is proved that the composite modified asphalt mixture technology can greatly reduce the mixing temperature, save energy and protect the environment, and can guarantee good road performance. Employing Buton Mastic Asphalt as modifier can obviously increase the high temperature stability of asphalt mixture, with little impact on low temperature performance.

  9. Rutting Resistance of Asphalt Overlay with Multilayer Wheel Tracking Test

    Institute of Scientific and Technical Information of China (English)

    LIAO Weidong; CHEN Zheng; WU Shaopeng; MO Liantong; LIU Gang

    2006-01-01

    The rutting resistance of multilayer asphalt overlay was researched by using laboratory wheel tracking test. The effects of loading level and test temperature on rutting resistance of asphalt overlay structure were evaluated by means of multilayer specimens .In comparison with multilayer tests, standard specimens of various layers were also conducted to evaluate the rutting resistance. Experimental results indicated that the test temperature and applied load have a significant effect on rutting resistance of asphalt concrete. Higher test temperature and heavier applied load resulted in higher rut depths. In addition, the mutilayer wheel tracking test has been demonstrated to be a more reasonable solution in evaluation on rutting resistance of asphatt pavement structure beasuse it reflects the cumulative permanent deformation in all of asphalt layers.

  10. Effect of base bitumen composition on asphalt rubber binder properties

    OpenAIRE

    Partl, M.N.; Ould-Henia, M.; Dumont, A.-G.

    2008-01-01

    The asphalt rubber blend properties are strongly related to its base components properties. The base bitumen composition is considered as a key factor influencing the final rheological properties of asphalt rubber binder. This paper describes results from a laboratory investigation of the interaction between crumb rubber and different composition bitumen according to the wet process. The bitumen composition is determined according to the SARA decomposition approac...

  11. Resistivity-temperature Characteristics of Conductive Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    SUN Wenzhou; LI Xu; YANG Qun; ZHANG Hongwei

    2016-01-01

    The changes of resistivity of conductive asphalt concrete at different temperatures were studied, and positive temperature coefficient (PTC) model was established to estimate the influence of temperature on the resistivity quantitatively, which eliminated the interference with conductivity evaluation brought by temperature variation. Finally, the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.

  12. DURABILITY OF ASPHALT CONCRETE MIXTURES USING DOLOMITE AGGREGATES

    Directory of Open Access Journals (Sweden)

    Imad Al-Shalout

    2015-12-01

    Full Text Available This study deals with the durability of asphalt concrete, including the effects of different gradations, compaction temperatures and immersion time on the durability potential of mixtures. The specific objectives of this study are: to investigate the effect of compaction temperature on the mechanical properties of asphalt concrete mixtures; investigate the effect of bitumen content and different aggregate gradations on the durability potential of bituminous mixtures.

  13. Modified rubberized stone matrix asphalt for Nineveh roads

    Institute of Scientific and Technical Information of China (English)

    Al-Hadidy AI; TAN Yi-qiu

    2008-01-01

    To evaluate the effects of Crumb Rubber Modifiers (CRMS) on basic engineering properties (i. e.Marshall, tensile strength, and compressive strength) of stone matrix asphalt mixtures, the ASTM testing and procedures were employed. Results of the evaluation were used to quantify the effect of CRM source and CRM content on engineering properties at testing temperatures of 25℃and 60℃. Statistical models were developed, which represent the nature of effects on performance-related properties of stone matrix asphalt mixtures.

  14. Assessment of low temperature cracking in asphalt pavement mixes and rheological performance of asphalt binders

    Science.gov (United States)

    Sowah-Kuma, David

    Government spends a lot of money on the reconstruction and rehabilitation of road pavements in any given year due to various distresses and eventual failure. Low temperature (thermal) cracking, one of the main types of pavement distress, contributes partly to this economic loss, and comes about as a result of accumulated tensile strains exceeding the threshold tensile strain capacity of the pavement. This pavement distress leads to a drastic reduction of the pavement's service life and performance. In this study, the severity of low temperature (thermal) cracking on road pavements selected across the Province of Ontario and its predicted time to failure was assessed using the AASTHO Mechanistic-Empirical Pavement Design Guide (MEPDG) and AASHTOWARE(TM) software, with inputs such as creep compliance and tensile strength from laboratory test. Highway 400, K1, K2, Y1, Sasobit, Rediset LQ, and Rediset WMX were predicted to have a pavement in-service life above 15 years. Additionally, the rheological performance of the recovered asphalt binders was assessed using Superpave(TM) tests such as the dynamic shear rheometer (DSR) and bending beam rheometer (BBR). Further tests using modified standard protocols such as the extended bending beam rheometer (eBBR) (LS-308) test method and double-edge notched tension (DENT) test (LS-299) were employed to evaluate the failure properties associated with in service performance. The various rheological tests showed K1 to be the least susceptible to low temperature cracking compared to the remaining samples whiles Highway 24 will be highly susceptible to low temperature cracking. X-ray fluorescence (XRF) analysis was performed on the recovered asphalt binders to determine the presence of metals such as zinc (Zn) and molybdenum (Mo) believed to originate from waste engine oil, which is often added to asphalt binders. Finally, the severity of oxidative aging (hardening) of the recovered asphalt binders was also evaluated using the

  15. Reinforcement of Recycled Foamed Asphalt Using Short Polypropylene Fibers

    Directory of Open Access Journals (Sweden)

    Yongjoo Kim

    2013-01-01

    Full Text Available This paper presents the reinforcing effects of the inclusion of short polypropylene fibers on recycled foamed asphalt (RFA mixture. Short polypropylene fibers of 10 mm length with a 0.15% by weight mixing ratio of the fiber to the asphalt binder were used. The Marshall stability test, the indirect tensile strength test, the resilient modulus test, and wheel tracking test of the RFA mixtures were conducted. The test results were compared to find out the reinforcing effects of the inclusion of the fiber and the other mixtures, which included the conventional recycled foamed asphalt (RFA mixtures; the cement reinforced recycled foamed asphalt (CRFA mixtures; the semihot recycled foamed asphalt (SRFA mixtures; and recycled hot-mix asphalt (RHMA mixtures. It is found that the FRFA mixture shows higher Marshall stability than the RFA and SRFA mixtures, higher indirect tensile strength than the RFA mixture, and higher rut resistance than the RFA, SRFA, and RHMA mixtures as seen from the wheel tracking test.

  16. Effects of Fibers on the Dynamic Properties of Asphalt Mixtures

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The dynamic characteristics of fiber-modified asphalt mixture were investigated. Cellulose fiber, polyester fiber and mineral fiber were used as additives for asphalt mixture, and the dosage was 0.3%, 0.3%,0.4%, respectively. Dynamic modulus test using SuperPave simple performance tester (SPT) was conducted to study the dynamic modulus (E*) and phase angle (δ) for the control asphalt mixture and fiber-modified ones at various temperatures and frequencies. Experimental results show that all fiber-modified asphalt mixtures have higher dynamic modulus compared with control mixture. The dynamic modulus master curves of each type of asphalt mixtures are determined based on nonlinear least square regression in accordance with the timetemperature superposition theory at a control temperature (21.1 ℃). The fatigue parameter E*×sinδ and rutting parameter E*/sinδ of asphalt mixture are adopted to study the fatigue and rutting-resistance properties, and experimental results indicate that such properties can be improved by fiber additives.

  17. Application of Common Mid-Point Method to Estimate Asphalt

    Science.gov (United States)

    Zhao, Shan; Al-Aadi, Imad

    2015-04-01

    3-D radar is a multi-array stepped-frequency ground penetration radar (GPR) that can measure at a very close sampling interval in both in-line and cross-line directions. Constructing asphalt layers in accordance with specified thicknesses is crucial for pavement structure capacity and pavement performance. Common mid-point method (CMP) is a multi-offset measurement method that can improve the accuracy of the asphalt layer thickness estimation. In this study, the viability of using 3-D radar to predict asphalt concrete pavement thickness with an extended CMP method was investigated. GPR signals were collected on asphalt pavements with various thicknesses. Time domain resolution of the 3-D radar was improved by applying zero-padding technique in the frequency domain. The performance of the 3-D radar was then compared to that of the air-coupled horn antenna. The study concluded that 3-D radar can be used to predict asphalt layer thickness using CMP method accurately when the layer thickness is larger than 0.13m. The lack of time domain resolution of 3-D radar can be solved by frequency zero-padding. Keywords: asphalt pavement thickness, 3-D Radar, stepped-frequency, common mid-point method, zero padding.

  18. Rheological properties of asphalt mixtures containing various fibers

    Institute of Scientific and Technical Information of China (English)

    叶群山; 吴少鹏; 陈筝; 刘至飞

    2008-01-01

    Rheological characteristics of fiber-modified asphalt mixture were investigated.Cellulous fiber,polyester fiber and mineral fiber were used as additives for asphalt mixture,and the dosages were 0.3%,0.3%,0.4%,respectively.Dynamic modulus test using superpave simple performance tester(SPT) was adopted to study the dynamic modulus and phase angle for the control mixture and fiber-modified ones at various temperatures and frequencies.Test results show that the rheological properties can be improved significantly by the addition of various fibers.The dynamic modulus increases with the increase of frequency,and the phase angle decreases with the increase of frequency.When various fibers are used,the dynamic modulus increases and phase angle decreases at each frequency.This indicates that the stiffness and the elastic portion of fiber-modified asphalt mixtures can be enhanced when various fibers are used,which results in the change of viscoelastic properties of mixtures.The creep test results show that the total strain and the permanent strain of asphalt mixtures during load-unload cycle can be significantly reduced,which results in the improvement of resistance to permanent deformation for asphalt mixtures containing various fiber additives.The Burgers model can be employed effectively to illustrate the rheological properties of fiber modified asphalt mixtures.

  19. Effectiveness of Micro- and Nanomaterials in Asphalt Mixtures through Dynamic Modulus and Rutting Tests

    Directory of Open Access Journals (Sweden)

    Hui Yao

    2016-01-01

    Full Text Available The objectives of this research are to use micro- and nanomaterials to modify the asphalt mixture and to evaluate the mechanical performance of asphalt mixtures. These micro- and nanomaterials, including carbon microfiber, Nanomer material, nanosilica, nonmodified nanoclay, and polymer modified nanoclay, were selected to blend with the control asphalt to improve the overall performance of the modified asphalt binders and mixtures. The microstructures of original materials and asphalt binders were observed by the field emission scanning electron microscope (FE-SEM. The mixture performance tests were employed to evaluate the resistance to rutting and permanent deformation of the modified asphalt mixtures. Test results indicate that (1 the dynamic modulus of micro- and nanomodified asphalt mixtures improved significantly; (2 the rutting susceptibility of the modified asphalt mixtures was reduced significantly compared to that of the control asphalt mixture; (3 the microstructures of modified asphalt binders were different from the control asphalt, and the structures determine the improvement in the performance of modified asphalt mixtures. These results indicate that the addition of micro- and nanomaterials enhanced the rutting performance and strength of asphalt mixtures. In addition, the analysis of variance (ANOVA was used to analyze the modifying effects of micro- and nanomaterials on the performance.

  20. Comparing Production and Placement of Warm-Mix Asphalt to Traditional Hot-Mix Asphalt for Constructing Airfield Pavements

    Science.gov (United States)

    2013-08-01

    pressure cells ( EPC ), single depth deflectometers (SDD), and asphalt strain gauges (ASG) are indicated by symbols denoted on the figures. Further...gauges, I-buttons, ASGs, SDDs, and EPCs to measure the pavement response to simulated aircraft loading. The asphalt concrete strain gauges (Figure 55...gauge in backscatter mode. The type of roller used for each pass is indicated on each figure. The contractor determined how many roller passes to use

  1. Professionalising the asphalt construction process: aligning information technologies, operators' knowledge and laboratory practices

    NARCIS (Netherlands)

    Bijleveld, Frank Roland

    2015-01-01

    This research addresses the need to professionalise the asphalt construction process. A distinctive action research strategy is designed and carried out to progressively improve operational strategies of asphalt teams from technological, human (operator) and laboratory perspectives. Using informatio

  2. The Effect of Joint Width on Structural Performance of Asphalt Block Pavements

    Directory of Open Access Journals (Sweden)

    Ahmed Abdelgalil

    2014-02-01

    Full Text Available Asphalt blocks have been occasionally used around the world as a road pavement, but there have been very limited studies being done to evaluate the effect of joint width (spacing between the blocks on the structural performance of asphalt paving blocks. This study explains the experimental study to assess the performance and properties of asphalt paving blocks laid with different joint widths between the blocks i.e., 0, 2 and 3 mm, respectively. A total of 250 asphalt paving blocks was manufactured and tested in the laboratory to ascertain the density, air voids, the compressive strength and the rut depth and displacement occurred in asphalt paving block. The design compressive load of single asphalt paving block is 166 kN. The test results showed that the joint width plays a vital role on the performance of asphalt block pavement. Asphalt paving blocks were laid as closely in contact as possible (0 mm yields the best structural performance.

  3. Asphalt Roofing Shingles Into Energy Project Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, Rex, PE

    2008-04-28

    Based on a widely cited September, 1999 report by the Vermont Agency of Natural Resources, nearly 11 million tons of asphalt roofing shingle wastes are produced in the United States each year. Recent data suggests that the total is made up of about 9.4 million tons from roofing tear-offs and about 1.6 million tons from manufacturing scrap. Developing beneficial uses for these materials would conserve natural resources, promote protection of the environment and strengthen the economy. This project explored the feasibility of using chipped asphalt shingle materials in cement manufacturing kilns and circulating fluidized bed (CFB) boilers. A method of enhancing the value of chipped shingle materials for use as fuel by removing certain fractions for use as substitute raw materials for the manufacture of new shingles was also explored. Procedures were developed to prevent asbestos containing materials from being processed at the chipping facilities, and the frequency of the occurrence of asbestos in residential roofing tear-off materials was evaluated. The economic feasibility of each potential use was evaluated based on experience gained during the project and on a review of the well established use of shingle materials in hot mix asphalt. This project demonstrated that chipped asphalt shingle materials can be suitable for use as fuel in circulating fluidized boilers and cement kilns. More experience would be necessary to determine the full benefits that could be derived and to discover long term effects, but no technical barriers to full scale commercial use of chipped asphalt shingle materials in these applications were discovered. While the technical feasibility of various options was demonstrated, only the use of asphalt shingle materials in hot mix asphalt applications is currently viable economically.

  4. Using Pyrolized Carbon Black (PCB) from Waste Tires in Asphalt Pavement (Part 1, Limestone Aggregate)

    OpenAIRE

    Park, Taesoon; Lovell, C. W.

    1996-01-01

    This study presents the viability of using PCB as an additive in hot mix asphalt concrete. Different ratios of PCB (5%, 10%, 15%, and 20% by weight of asphalt) were blended with two grades of asphalt (AC-10 and AC-20). The complete behaviors of the PCB modified asphalt concrete were investigated by comprehensive laboratory testing and evaluation. The Marshall method was used to determine the optimum binder content and the mechanical properties and void relationships were investigated by th...

  5. Research on the relationship between water stability and aggregate gradation of asphalt pavement

    OpenAIRE

    Zhao Bing; Zhao Bo

    2015-01-01

    In the early destruction of asphalt pavement, water damage is the most major form.In this paper, experimental study was conducted on the composition of asphalt concrete,Marshall specimens were made in different types of aggregate gradation with the same kind of asphalt. Water immersion tests were conducted in order to analysis the relationship between the water stability and aggregate gradation of asphalt pavement.

  6. Adhesion Evaluation of Asphalt-Aggregate Interface Using Surface Free Energy Method

    OpenAIRE

    Jie Ji; Hui Yao; Luhou Liu; Zhi Suo; Peng Zhai; Xu Yang; Zhanping You

    2017-01-01

    The influence of organic additives (Sasobit and RH) and water on the adhesion of the asphalt-aggregate interface was studied according to the surface free energy theory. Two asphalt binders (SK-70 and SK-90), and two aggregate types (limestone and basalt) were used in this study. The sessile drop method was employed to test surface free energy components of asphalt, organic additives and aggregates. The adhesion models of the asphalt-aggregate interface in dry and wet conditions were establis...

  7. Research on the relationship between water stability and aggregate gradation of asphalt pavement

    Directory of Open Access Journals (Sweden)

    Zhao Bing

    2015-05-01

    Full Text Available In the early destruction of asphalt pavement, water damage is the most major form.In this paper, experimental study was conducted on the composition of asphalt concrete,Marshall specimens were made in different types of aggregate gradation with the same kind of asphalt. Water immersion tests were conducted in order to analysis the relationship between the water stability and aggregate gradation of asphalt pavement.

  8. Investigating the Properties of Asphalt Concrete Containing Glass Fibers and Nanoclay

    OpenAIRE

    Hasan Taherkhani

    2016-01-01

    The performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. Therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. One common method of improving the performance of asphaltic mixtures is using different types of additives. This research investigated the effects of reinforcement by randomly distributed glass fib...

  9. Study on Process for Manufacturing Heavy Traffic Asphalt from Gudong Crude

    Institute of Scientific and Technical Information of China (English)

    Wang Zijun; Long Jun; She Yucheng

    2004-01-01

    The Gudong crude from Gudao oil-bearing region in the Shengli oilfield was used as the target for studying the process of manufacturing heavy traffic road asphalt. The heavy traffic road asphalt products can be made from Gudong crude through blending residuum from mild thermal conversion of vacuum resid with extract, blending the deoiled asphalt from VR propane deasphalting with vacuum resid and the extract, and blending of oxidizedhard asphalt originated from VR with the extract.

  10. Structural and Thermal Analysis of Asphalt Solar Collector Using Finite Element Method

    OpenAIRE

    Jinshah Basheer Sheeba; Ajith Krishnan Rohini

    2014-01-01

    The collection of solar energy using asphalt pavements has got a wide importance in the present energy scenario. Asphalt pavements subjected to solar radiation can reach temperature up to 70°C because of their excellent heat absorbing property. Many working parameters, such as pipe diameter, pipe spacing, pipe depth, pipe arrangement, and flow rate, influence the performance of asphalt solar collector. Existing literature on thermal energy extraction from asphalt pavements is based on the sma...

  11. Performances and Durability of Asphalt Mixtures Made with Reclaimed Asphalt Pavement

    OpenAIRE

    Noferini, Luca

    2016-01-01

    According to most recent surveys, 265 mil tonnes of asphalt for road applications were produced in the European area in 2014. In the same year, the amount of available RAP was more than 50 mil tonnes. The use of RAP in new blended mixes reduces the need of neat bitumen, making RAP recycling economically attractive. In spite of its economic and environmental benefits, the use of RAP is often subjected to restrictive policies pursued by agencies due to uncertainty related to RAP mixes field per...

  12. The first engineered self-healing asphalt road: How is it performing?

    NARCIS (Netherlands)

    Liu, Q.; Schlangen, H.E.J.G.; Van Bochove, G.

    2013-01-01

    Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surfac

  13. 40 CFR 436.60 - Applicability; description of the asphaltic mineral subcategory.

    Science.gov (United States)

    2010-07-01

    ... asphaltic mineral subcategory. 436.60 Section 436.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS MINERAL MINING AND PROCESSING POINT SOURCE CATEGORY Asphaltic Mineral Subcategory § 436.60 Applicability; description of the asphaltic mineral subcategory....

  14. Research on fracture performance of epoxy asphalt concrete based on double-K fracture criterion

    Science.gov (United States)

    Zhang, M.; Qian, Z. D.; Xue, Y. C.

    2017-01-01

    After cracks appear on steel bridge deck epoxy asphalt concrete pavement, cracks propagate fast under vehicle load. This paper studied the fracture performance of epoxy asphalt concrete, utilized single edge notched beam (SEB) three-point bending test, measured the load (P) exerted on epoxy asphalt SEB; utilized digital camera to record the fracture process of epoxy asphalt SEB, extracted the images according to the required sampling frequency and utilized Image-Pro Plus to measure the crack mouth opening displacement (CMOD) of epoxy asphalt SEB on the extracted images; calculated the double-K fracture parameters according to the P-CMOD curve. Results indicate that of epoxy asphalt concrete is 1.11 MPa and of epoxy asphalt concrete is 2.31 MPa at -15°C of epoxy asphalt concrete is 1.02 MPa and of epoxy asphalt concrete is 1.83 MPa at -5°C of epoxy asphalt concrete is 0.77 MPa and of epoxy asphalt concrete is 1.82 MPa at 5°C. The double-K fracture parameters of epoxy asphalt concrete increase slightly when the temperature decreases at the scope of -15°C to 5°C. The relation of and is .

  15. Visualizing asphalt roller trajectories in context: acquiring, processing, and representing sensor readings

    NARCIS (Netherlands)

    Vasenev, Alexandr Nikolajevitsj

    2015-01-01

    The asphalt compaction process relies heavily on the skills and knowledge of roller operators who act alongside other stakeholders involved in asphalt paving. It is essential that these construction specialists: (1) are adequately informed about the initial temperature distribution of the asphalt la

  16. On the representative volume element of asphalt concrete at low temperature

    Science.gov (United States)

    Marasteanu, Mihai; Cannone Falchetto, Augusto; Velasquez, Raul; Le, Jia-Liang

    2016-08-01

    The feasibility of characterizing asphalt mixtures' rheological and failure properties at low temperatures by means of the Bending Beam Rheometer (BBR) is investigated in this paper. The main issue is the use of thin beams of asphalt mixture in experimental procedures that may not capture the true behavior of the material used to construct an asphalt pavement.

  17. ASPHALT FOR OFF-STREET PAVING AND PLAY AREAS, 3RD EDITION.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    THIS PAMPHLET DISCUSSES THE ALTERNATIVE METHODS, APPLICATIONS, AND TECHNICAL CONSIDERATIONS FOR OFF-STREET PAVING AND PLAY AREAS. OFF-STREET PAVING INCLUDES--(1) ASPHALT-PAVED PARKING AREAS, (2) ROOF DECK PARKING AREAS, (3) ASPHALT-PAVED DRIVEWAYS, (4) ASPHALT-PAVED SERVICE STATION LOTS, AND (5) SIDEWALKS. THE DISCUSSION OF PLAY AREAS…

  18. Preparation and Performance of Asphalt Compound Modified with Waste Crumb Rubber and Waste Polyethylene

    Directory of Open Access Journals (Sweden)

    Yuqiao Yang

    2016-01-01

    Full Text Available Three kinds of modified asphalt were prepared by adding waste crumb rubber (WCR, waste polyethylene (WPE, and WCR/WPE to base asphalt, respectively. The influence of different doses on the performance of modified asphalt, such as 25°C penetration, softening point, 5°C ductility, and 135°C, 165°C viscosity, was studied, and the modification mechanism of modified asphalt was discussed through the fluorescence microscope. As the waterproofing materials, the waterproofness of WCR/WPE compound modified asphalt was tested. The results show that the WPE modified asphalt has excellent resistance to high temperature and WCR modified asphalt has good low temperature resistance. The resistance to deformation ability of WPE modified asphalt is better than that of the WCR modified asphalt. The 135°C viscosity of compound modified asphalt is better than that of WPE and WCR modified asphalt. In addition, the waterproofness of compound modified asphalt using waterproofing materials is better than that of common waterproofing materials.

  19. 40 CFR Table 2 of Subpart Aaaaaaa... - Emission Limits for Asphalt Roofing Manufacturing (Coating) Operations

    Science.gov (United States)

    2010-07-01

    ... Manufacturing (Coating) Operations 2 Table 2 of Subpart AAAAAAA of Part 63 Protection of Environment... Pollutants for Area Sources: Asphalt Processing and Asphalt Roofing Manufacturing Other Requirements and... AAAAAAA of Part 63—Emission Limits for Asphalt Roofing Manufacturing (Coating) Operations For * * *...

  20. Image analysis of aggregate,mastic and air void phases for asphalt mixture%Image analysis of aggregate, mastic and air void phases for asphalt mixture

    Institute of Scientific and Technical Information of China (English)

    ADHIKARI Sanjeev; YOU Zhan-ping; HAO Pei-wen; WANG Hai-nian

    2013-01-01

    The shape characterization and spatial distribution of aggregate,mastic and air void phases for asphalt mixture were analyzed.Three air void percentage asphalt mixtures,4%,7% and 8%,respectively,were cut into cross sections and polished.X-ray scanning microscope was used to capture aggregate,mastic,air void phase by the image.The average of polygon diameter was chosen as a threshold to determine which aggregates would be retained on a given sieve.The aggregate morphological image from scanned image was utilized by digital image processing method to calculate the gradation of aggregate and simulate the real gradation.Analysis result shows that the air void of asphalt mixture has influence on the correlation between calculation gradation and actual gradation.When comparing 4.75 mm sieve size of 4%,7% and 8% air void asphalt mixtures,7% air void asphalt mixture has 55% higher than actual size gradation,8% air void asphalt mixture has 8% higher than actual size gradation,and 4% air void asphalt mixture has 3.71% lower than actual size gradation.4% air void asphalt mixture has the best correlation between calculation gradation and actual gradation comparing to other specimens.The air void percentage of asphalt mixture has no obvious influence on the air void orientation,and three asphalt mixtures show the similar air orientation along the same direction.4 tabs,7 figs,17 refs.

  1. Inhalation and dermal exposure among asphalt paving workers.

    Science.gov (United States)

    McClean, M D; Rinehart, R D; Ngo, L; Eisen, E A; Kelsey, K T; Herrick, R F

    2004-11-01

    The primary objective of this study was to identify determinants of inhalation and dermal exposure to polycyclic aromatic compounds (PACs) among asphalt paving workers. The study population included three groups of highway construction workers: 20 asphalt paving workers, as well as 12 millers and 6 roadside construction workers who did not work with hot-mix asphalt. During multiple consecutive work shifts, personal air samples were collected from each worker's breathing zone using a Teflon filter and cassette holder connected in series with an XAD-2 sorbent tube, while dermal patch samples were collected from the underside of each worker's wrist. All exposure samples were analyzed for PACs, pyrene and benzo[a]pyrene. Inhalation and dermal PAC exposures were highest among asphalt paving workers. Among paving workers, inhalation and dermal PAC exposures varied significantly by task, crew, recycled asphalt product (RAP) and work rate (inhalation only). Asphalt mix containing high RAP was associated with a 5-fold increase in inhalation PAC exposures and a 2-fold increase in dermal PAC exposure, compared with low RAP mix. The inhalation PAC exposures were consistent with the workers' proximity to the primary source of asphalt fume (paver operators > screedmen > rakers > roller operators), such that the adjusted mean exposures among paver operators (5.0 microg/m3, low RAP; 24 microg/m3, high RAP) were 12 times higher than among roller operators (0.4 microg/m3, low RAP; 2.0 microg/m3, high RAP). The dermal PAC exposures were consistent with the degree to which the workers have actual contact with asphalt-contaminated surfaces (rakers > screedmen > paver operators > roller operators), such that the adjusted mean exposures among rakers (175 ng/cm2, low RAP; 417 ng/cm2, high RAP) were approximately 6 times higher than among roller operators (27 ng/cm2, low RAP; 65 ng/cm2, high RAP). Paving task, RAP content and crew were also found to be significant determinants of

  2. The Utilization of Graphene Oxide in Traditional Construction Materials: Asphalt

    Directory of Open Access Journals (Sweden)

    Wenbo Zeng

    2017-01-01

    Full Text Available In the advanced research fields of solar cell and energy storing materials, graphene and graphene oxide (GO are two of the most promising materials due to their high specific surface area, and excellent electrical and physical properties. However, they was seldom studied in the traditional materials because of their high cost. Nowadays, graphene and GO are much cheaper than before with the development of production technologies, which provides the possibility of using these extraordinary materials in the traditional construction industry. In this paper, GO was selected as a nano-material to modify two different asphalts. Then a thin film oven test and a pressure aging vessel test were applied to simulate the aging of GO-modified asphalts. After thermal aging, basic physical properties (softening point and penetration were tested for the samples which were introduced at different mass ratios of GO (1% and 3% to asphalt. In addition, rheological properties were tested to investigate how GO could influence the asphalts by dynamic shearing rheometer tests. Finally, some interesting findings and potential utilization (warm mixing and flame retardants of GO in asphalt pavement construction were explained.

  3. Performance evaluation of high modulus asphalt concrete mixes

    Science.gov (United States)

    Haritonovs, V.; Tihonovs, J.; Zaumanis, M.

    2016-04-01

    Dolomite is one of the most available sedimentary rocks in the territory of Latvia. Dolomite quarries contain about 1000 million tons of this material. However, according to Latvian Road Specifications, this dolomite cannot be used for average and high intensity roads because of its low quality (mainly, LA index). Therefore, mostly imported magmatic rocks (granite, diabase, gabbro, basalt) or imported dolomite are used which makes asphalt expensive. However, practical experience shows that even with these high quality materials roads exhibit rutting, fatigue and thermal cracks. The aim of the research is to develop a high performance asphalt concrete for base and binder courses using only locally available aggregates. In order to achieve resistance against deformations at a high ambient temperature, a hard grade binder was used. Workability, fatigue and thermal cracking resistance, as well as sufficient water resistance is achieved by low porosity (3-5%) and higher binder content compared to traditional asphalt mixtures. The design of the asphalt includes a combination of empirical and performance based tests, which in laboratory circumstances allow simulating traffic and environmental loads. High performance AC 16 base asphalt concrete was created using local dolomite aggregate with polymer modified (PMB 10/40-65) and hard grade (B20/30) bitumen. The mixtures were specified based on fundamental properties in accordance to EN 13108-1 standard.

  4. An Approach for Nonlinear Fatigue Damage Evaluation in Asphalt Pavements

    Science.gov (United States)

    Rajbongshi, Pabitra; Thongram, Sonika

    2016-09-01

    Fatigue due to vehicular loads is one of the primary distress mechanisms in asphalt pavements. It happens primarily due to deterioration in asphalt material with load repetitions. Degradation of asphalt material may be evaluated using different parameters. In view of degradation, the incremental damage in a given pavement section would be different for different repetitions, even with same loadings. Therefore, the damage progression becomes nonlinear with repetitions. Accounting such nonlinearity in damage accumulation, and based on different damage evaluation parameters, this paper presents an equivalent approach for fatigue damage evaluation in asphalt pavements. Traditional fatigue equation adopted in mechanistic-empirical pavement design has been used in the present work. Four different criteria, namely number of load repetitions, asphalt stiffness reduction, strain enhancement and fatigue life reduction with repetitions are considered for damage estimation. The proposed approach could estimate same value of nonlinear damage, irrespective of the criteria used. The simplest form of criterion i.e. the number of load repetitions can be used for fatigue performance evaluation. Probabilistically, the damage propagation is also correlated and assessed with the failure probability.

  5. Tetrapyrroles and associated compounds in Dead Sea asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Aizenshtat, Z. (Hebrew Univ. of Jerusalem, Israel); Dinur, D.; Nissenbaum, A.

    1979-01-01

    Metallo- and free porphyrins (1000 to 1500 ppM) isolated from asphalts occurring as huge blocks floating in the northern part of the Dead Sea, have been analyzed by visible-uv (v-uv) spectrophotometry and by mass spectrometry. The concentration of vanadyl porphyrins in the asphalts exceeds by far that of the Ni-porphyrins, despite the l:3 V/Ni ratio found in the total asphalt sample. The free porphyrins resemble those from the Uinta Basin (USA) gilsonite and contain a mixture of homologous Aetio- and deoxyphyllo-erythroaetioporphyrins (DPEP). The non-porphyrin fraction of the asphalt showed an identical aliphatic, hydrocarbon distribution with that of heavy crude oil from the same area. The more polar fraction associated with the porphyrins was compared with the polar fraction of the previously described ozokerite from the Dead Sea area. From high-resolution MS, IR, v-uv and NMR spectra, combined with hydrolysis and GLC analysis, it is suggested that even-numbered (C/sub 12/, C/sub 16/, C/sub 18/, C/sub 18/ /sub 1/, C/sub 22/) fatty acids are associated with the asphaltic porphyrins, probably in the triglyceride form.

  6. Laboratory Measurements of Particulate Matter Concentrations from Asphalt Pavement Abrasion

    Science.gov (United States)

    Fullová, Daša; Đurčanská, Daniela

    2016-12-01

    The issue of emissions from road traffic is compounded by the fact that the number of vehicles and driven kilometres increase each year. Road traffic is one of the main sources of particulate matter and traffic volume is still increasing and has unpleasant impact on longevity of the pavements and the environment. Vehicle motions cause mechanical wearing of the asphalt pavement surface - wearing course by vehicle tyres. The contribution deals with abrasion of bituminous wearing courses of pavements. The asphalt mixtures of wearing courses are compared in terms of mechanically separated particulate matter. The samples of asphalt mixtures were rutted in wheel tracking machine. The particulate matter measurements were performed in laboratory conditions. The experimental laboratory measurements make it possible to sample particulates without contamination from exhaust emissions, abraded particles from vehicles, resuspension of road dust and climate affects. The contribution offers partial results of measurements on six trial samples of asphalt mixtures with different composition. It presents particulate matter morphology and the comparison of rutted asphalt samples in terms of PM mass concentrations and chemical composition.

  7. UTILIZATION OF WASTE PLASTIC BOTTLES IN ASPHALT MIXTURE

    Directory of Open Access Journals (Sweden)

    TAHER BAGHAEE MOGHADDAM

    2013-06-01

    Full Text Available Nowadays, large amounts of waste materials are being produced in the world. One of the waste materials is plastic bottle. Generating disposable plastic bottles is becoming a major problem in many countries. Using waste plastic as a secondary material in construction projects would be a solution to overcome the crisis of producing large amount of waste plastics in one hand and improving the structure’s characteristics such as resistance against cracking on the other hand. This study aimed to investigate the effects of adding plastic bottles in road pavement. Marshall properties as well as specific gravity of asphalt mixture containing different percentages of plastic bottles were evaluated. Besides, Optimum Asphalt Content (OAC was calculated for each percentages of plastic bottles used in the mix. The stiffness and fatigue characteristics of mixture were assessed at OAC value. Results showed that the stability and flow values of asphalt mixture increased by adding waste crushed plastic bottle into the asphalt mixture. Further, it was shown that the bulk specific gravity and stiffness of mixtures increased by adding lower amount of plastic bottles; however, adding higher amounts of plastic resulted in lower specific gravity and mix stiffness. In addition, it was concluded that the mixtures containing waste plastic bottles have lower OAC values compared to the conventional mixture, and this may reduce the amount of asphalt binder can be used in road construction projects. Besides, the mixtures containing waste plastic showed significantly greater fatigue resistance than the conventional mixture.

  8. Recovery and reuse of asphalt roofing waste. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Desai, S.; Graziano, G.; Shepherd, P.

    1984-02-02

    Burning of asphalt roofing waste as a fuel and incorporating asphalt roofing waste in bituminous paving were identified as the two outstanding resource recovery concepts out of ten studied. Four additional concepts might be worth considering under different market or technical circumstances. Another four concepts were rated as worth no further consideration at this time. This study of the recovery of the resource represented in asphalt roofing waste has identified the sources and quantities of roofing waste. About six million cubic yards of scrap roofing are generated annually in the United States, about 94% from removal of old roofing at the job site and the remainder from roofing material production at factories. Waste disposal is a growing problem for manufacturers and contractors. Nearly all roofing waste is hauled to landfills at a considerable expense to roofing contractors and manufacturers. Recovery of the roofing waste resource should require only a modest economic incentive. The asphalt contained in roofing waste represents an energy resource of more than 7 x 10/sup 13/ Btu/year. Another 1 x 10/sup 13/ Btu/year may be contained in field-applied asphalt on commercial building roofs. The two concepts recommended by this study appear to offer the broadest applicability, the most favorable economics, and the highest potential for near-term implementation to reuse this resource.

  9. Aqueous leaching of polycyclic aromatic hydrocarbons from bitumen and asphalt.

    Science.gov (United States)

    Brandt, H C; de Groot, P C

    2001-12-01

    The application of bitumen in, e.g. asphalt roads, roofs and hydraulic applications will lead to the leaching of compounds from the bitumen/asphalt into the environment. Because polycyclic aromatic hydrocarbons (PAHs) are present in bitumen, static and dynamic leach tests have been performed to study the leaching behaviour of this class of compounds. Nine petroleum bitumens covering a representative range of commercially available products and one asphalt made from one of the bitumens have been tested in a static leach test. The asphalt has been also subjected to a dynamic leach test. The main conclusions are that a 30h dynamic leach test is sufficient to determine the equilibrium concentration that will be reached after bitumen or asphalt has been in contact with the water for more than 3-6 days. As an alternative to performing a leach test, this concentration can be calculated from the PAH concentrations in the bitumen, and their distribution coefficients, as calculated here, or from their aqueous solubilities. The equilibrium PAH concentrations in the leach water from bitumens stay well below the surface water limits that exist in several EEC-countries and are also more than an order of magnitude lower than the current EEC limits for potable water.

  10. Determination of Rheological Properties of Bio Mastic Asphalt

    Directory of Open Access Journals (Sweden)

    R. Muniandy

    2008-01-01

    Full Text Available Due to the high oil prices the price of asphalt binder has increased tremendously. This scenario has warranted demand for higher viscosity cheaper asphalt for pavement construction. A study was conducted to take advantage of the Empty Fruit Bunch (EFB of Date and Oil Palm trees (which are considered as waste to produce cellulose fiber to be used as additives in the asphalt binder. If these EFB's could be beneficially utilized in any application, it would reduce the load on the nation's landfills and at the same time reducing the cost of road construction. A total of 11 blends were prepared that consisted of 5 blends with date palm fiber, 5 blends with oil palm fiber and one control sample that contained no fibers. The samples were evaluated using Dynamic Shear Rheometer (DSR equipment in accordance with the superpave Strategic Highway Research Program (SHRP requirements. The neat asphalt binders (Unaged, Rolling Thin Film Oven (RTFO aged and Pressure Ageing Vessel (PAV samples were then measured for phase angle, shear strain and complex shear modulus and then evaluated in accordance with SHRP requirements. The results indicated that the fibers enhanced the rheological performance of Bio Mastic Asphalt (BMA blends. The control sample which was categorized as PG58 was enhanced to PG76 with 0.375% date palm fiber. The oil palm has also improved the blend up to PG70 with 0.3% oil palm fiber.

  11. Laboratory Measurements of Particulate Matter Concentrations from Asphalt Pavement Abrasion

    Directory of Open Access Journals (Sweden)

    Fullová Daša

    2016-12-01

    Full Text Available The issue of emissions from road traffic is compounded by the fact that the number of vehicles and driven kilometres increase each year. Road traffic is one of the main sources of particulate matter and traffic volume is still increasing and has unpleasant impact on longevity of the pavements and the environment. Vehicle motions cause mechanical wearing of the asphalt pavement surface - wearing course by vehicle tyres. The contribution deals with abrasion of bituminous wearing courses of pavements. The asphalt mixtures of wearing courses are compared in terms of mechanically separated particulate matter. The samples of asphalt mixtures were rutted in wheel tracking machine. The particulate matter measurements were performed in laboratory conditions. The experimental laboratory measurements make it possible to sample particulates without contamination from exhaust emissions, abraded particles from vehicles, resuspension of road dust and climate affects. The contribution offers partial results of measurements on six trial samples of asphalt mixtures with different composition. It presents particulate matter morphology and the comparison of rutted asphalt samples in terms of PM mass concentrations and chemical composition.

  12. Asphalt fume dermal carcinogenicity potential: I. dermal carcinogenicity evaluation of asphalt (bitumen) fume condensates.

    Science.gov (United States)

    Clark, Charles R; Burnett, Donald M; Parker, Craig M; Arp, Earl W; Swanson, Mark S; Minsavage, Gary D; Kriech, Anthony J; Osborn, Linda V; Freeman, James J; Barter, Robert A; Newton, Paul E; Beazley, Shelley L; Stewart, Christopher W

    2011-10-01

    Asphalt (bitumen) fume condensates collected from the headspace above paving and Type III built up roofing asphalt (BURA) tanks were evaluated in two-year dermal carcinogenicity assays in male C3H/HeNCrl mice. A third sample was generated from the BURA using a NIOSH laboratory generation method. Similar to earlier NIOSH studies, the BURA fume condensates were applied dermally in mineral oil twice per week; the paving sample was applied 7 days/week for a total weekly dose of 50 mg/wk in both studies. A single benign papilloma was observed in a group of 80 mice exposed to paving fume condensate at the end of the two-year study and only mild skin irritation was observed. The lab generated BURA fume condensate resulted in statistically significant (P<0.0001) increases in squamous cell carcinomas (35 animals or 55% of animals at risk). The field-matched BURA condensate showed a weaker but significant (P=0.0063) increase (8 carcinomas or 13% of animals) and a longer average latency (90 weeks vs. 76 for the lab fume). Significant irritation was observed in both BURA condensates. It is concluded that the paving fume condensate was not carcinogenic under the test conditions and that the field-matched BURA fume condensate produced a weak tumor response compared to the lab generated sample.

  13. Production of De-asphalted Oil and Fine Asphalt Particles by Supercritical Extraction

    Institute of Scientific and Technical Information of China (English)

    赵锁奇; 许志明; 王仁安

    2003-01-01

    A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0kg.h-1 was setup to extract petroleum residue by pentane to obtain more oil for further upgrading. A discharging system integrated to the bottom of the extractor was used to recover solvent as gas while asphalt was obtained as fine particles. The influence of operating conditions on the yield and quality of extracts, i.e., deasphalted oil (DAO) and resin, was studied in the range of temperature 150-220℃, pressure of 4.0-6.0 MPa and the mass ratio of solvent to oil feed (S/O) 2.5-5.0. The particle size distribution, apparent forms and the packing density, which vary with operating pressure, were measured. The particle structures were observed by SEM as well. With the modification to conventional processes, furnace can be eliminated for solvent recovery from asphalt phase, so as to reduce energy consumption.

  14. The effect of aggregate density on pavement performance of SMA-13 asphalt mixture

    Directory of Open Access Journals (Sweden)

    Qiao Yinping

    2016-05-01

    Full Text Available This paper chooses the top layer SMA-13 asphalt mixture material as the research object. Basalt was selected as pavement material, and modified SBS asphalt was used as a cementing material. Two basalt aggregates with different densities were used to carry out standard Marshall test in the laboratory.Aimed at the volume parameters of the asphalt mixture carry on anaiysis,and obtian the effect of aggregate density on pavement performance of SMA-13 asphalt mixture, which is that the density of aggregate has a significant effect on the void ratio, saturation, and the gap rate of the aggregate, thus affecting the pavement performance of the asphalt mixture

  15. Possibilities of preparation asphalt concrete by oil sands of Kazakhstan

    Directory of Open Access Journals (Sweden)

    Erbol Tileuberdi

    2012-12-01

    Full Text Available In the paper physicochemical properties of oil sands of Munayli-Mola deposits and efficient ways to use them for preparing asphalt concrete were represented. For determination of organic part of oil sands the extraction methods were used in Soxhlet apparatus by variety of solvents. It has been established 16 wt.% content of natural bitumen in oil sands, which compared with results of ash content determination. According to results of experiment, the natural bitumen is heavy oil and its characteristics close to characteristics of paving bitumen. The optimum content of oil sands in asphalt mix are 28 and 47 mass %, the mixes prepared under these conditions satisfy standard requirements of the Republic of Kazakhstan on the asphalt mixture ST RK 1225-2003.

  16. Asphalt emulsion sealing of uranium mill tailings. 1980 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, J.N.; Koehmstedt, P.L; Esterl, D.J.; Freeman, H.D.; Buelt, J.L.; Nelson, D.A.; Elmore, M.R.

    1981-05-01

    Studies of asphalt emulsion sealants conducted by the Pacific Northwest Laboratory have demonstrated that the sealants are effective in containing radon and other potentially hazardous material within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to near background levels. Field tests at the tailings pile in Grand Junction, Colorado, confirmed that an 8-cm admix seal containing 22 wt% asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and compacted, overburden was applied over the seal to protect the seal from ultraviolet degradation.

  17. Deformation Parameters and Fatigue of the Recycled Asphalt Mixtures

    Science.gov (United States)

    Šrámek, Juraj

    2015-12-01

    The deformational properties of asphalt mixtures measured by dynamic methods and fatigue allow a design the road to suit the expected traffic load. Quality of mixtures is also expressed by the resistance to permanent deformation. Complex modulus of stiffness and fatigue can reliably characterize the proposed mixture of asphalt pavement. The complex modulus (E*) measurement of asphalt mixtures are carried out in laboratory of Department of Construction Management at University of Žilina by two-point bending test method on trapezoid-shaped samples. Today, the fatigue is verified on trapezoid-shaped samples and is assessed by proportional strain at 1 million cycles (ɛ6). The test equipment and software is used to evaluate fatigue and deformation characteristics.

  18. Hanford Permanent Isolation Barrier Program: Asphalt technology test plan

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.

    1994-05-01

    The Hanford Permanent Isolation Barriers use engineered layers of natural materials to create an integrated structure with backup protective features. The objective of current designs is to develop a maintenance-free permanent barrier that isolates wastes for a minimum of 1000 years by limiting water drainage to near-zero amounts. Asphalt is being used as an impermeable water diversion layer to provide a redundant layer within the overall barrier design. Data on asphalt barrier properties in a buried environment are not available for the required 100-year time frame. The purpose of this test plan is to outline the activities planned to obtain data with which to estimate performance of the asphalt layers.

  19. Open Graded Asphalt Mixture Design for Environmentally Friendly Road

    Science.gov (United States)

    Setyawan, A.; Suryoto; Sumarsono, A.; Widyastuti, S.

    2017-02-01

    The road is an important infrastructure to support various economic development. By increasing the population, the constructions of road infrastructure are obviously required and cover more land use area, consequently narrowed the areas for water absorption into the land. Therefore, it is necessary to improve more environmentally friendly of road constructions, in this case is by using open graded asphalt. Open graded asphalt is the mixture of asphalt with low fine aggregate content to produce a high percentage of air voids, which expected to be able to absorb water into the land underneath. This observation uses laboratory experiment method. Materials that are used are natural gravel and the volcanic gravel, 60/70 asphalt penetration and stone dust filler. The tests performed for the samples are Marshall test, falling head water permeability, indirect tensile strength and unconfined compressive strength. The optimum bitumen content for each type of aggregate have been found to be 2.95% for natural gravel and 4.65% for volcanic gravel. Open graded asphalt porosity is 26.52% for natural gravel, whereas the volcanic gravel is 22.31%. The vertical and horizontal permeability for natural gravel are 1.25 cm/second and 0.92 cm/second, respectively. Whereas, for the volcanic gravel is 1.43 cm/second and 1.10 cm/second, respectively. Indirect tensile strength (ITS) value for natural gravel is 59.49 KPa whereas the volcanic gravel is 74.84 KPa. The unconfined compressive strength (UCS) value for natural gravel is 1070.63 KPa, whereas the volcanic gravel is 1120.69 KPa. It is concluded that the open graded porous asphalt is only compatible for low volume traffic road and need improvement to be able to be used as standard road.

  20. Rutting Prediction in Asphalt Pavement Based on Viscoelastic Theory

    Directory of Open Access Journals (Sweden)

    Nahi Mohammed Hadi

    2016-01-01

    Full Text Available Rutting is one of the most disturbing failures on the asphalt roads due to the interrupting it is caused to the drivers. Predicting of asphalt pavement rutting is essential tool leads to better asphalt mixture design. This work describes a method of predicting the behaviour of various asphalt pavement mixes and linking these to an accelerated performance testing. The objective of this study is to develop a finite element model based on viscoplastic theory for simulating the laboratory testing of asphalt mixes in Hamburg Wheel Rut Tester (HWRT for rutting. The creep parameters C1, C2 and C3 are developed from the triaxial repeated load creep test at 50°C and at a frequency of 1 Hz and the modulus of elasticity and Poisson’ s ratio determined at the same temperature. Viscoelastic model (creep model is adopted using a FE simulator (ANSYS in order to calculate the rutting for various mixes under a uniform loading pressure of 500 kPa. An eight-node with a three Degrees of Freedom (UX, UY, and UZ Element is used for the simulation. The creep model developed for HWRT tester was verified by comparing the predicted rut depths with the measured one and by comparing the rut depth with ABAQUS result from literature. Reasonable agreement can be obtained between the predicted rut depths and the measured one. Moreover, it is found that creep model parameter C1 and C3 have a strong relationship with rutting. It was clear that the parameter C1 strongly influences rutting than the parameter C3. Finally, it can be concluded that creep model based on finite element method can be used as an effective tool to analyse rutting of asphalt pavements.

  1. Adhesion Evaluation of Asphalt-Aggregate Interface Using Surface Free Energy Method

    Directory of Open Access Journals (Sweden)

    Jie Ji

    2017-02-01

    Full Text Available The influence of organic additives (Sasobit and RH and water on the adhesion of the asphalt-aggregate interface was studied according to the surface free energy theory. Two asphalt binders (SK-70 and SK-90, and two aggregate types (limestone and basalt were used in this study. The sessile drop method was employed to test surface free energy components of asphalt, organic additives and aggregates. The adhesion models of the asphalt-aggregate interface in dry and wet conditions were established, and the adhesion work was calculated subsequently. The energy ratios were built to evaluate the effect of organic additives and water on the adhesiveness of the asphalt-aggregate interface. The results indicate that the addition of organic additives can enhance the adhesion of the asphalt-aggregate interface in dry conditions, because organic additives reduced the surface free energy of asphalt. However, the organic additives have hydrophobic characteristics and are sensitive to water. As a result, the adhesiveness of the asphalt-aggregate interface of the asphalt containing organic additives in wet conditions sharply decreased due to water damage to asphalt and organic additives. Furthermore, the compatibility of asphalt, aggregate with organic additive was noted and discussed.

  2. Effect of Material Composition and Environmental Condition on Thermal Characteristics of Conductive Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Pan Pan

    2017-02-01

    Full Text Available Conductive asphalt concrete with high thermal conductivity has been proposed to improve the solar energy collection and snow melting efficiencies of asphalt solar collector (ASC. This paper aims to provide some insight into choosing the basic materials for preparation of conductive asphalt concrete, as well as determining the evolution of thermal characteristics affected by environmental factors. The thermal properties of conductive asphalt concrete were studied by the Thermal Constants Analyzer. Experimental results showed that aggregate and conductive filler have a significant effect on the thermal properties of asphalt concrete, while the effect of asphalt binder was not evident due to its low proportion. Utilization of mineral aggregate and conductive filler with higher thermal conductivity is an efficient method to prepare conductive asphalt concrete. Moreover, change in thermal properties of asphalt concrete under different temperature and moisture conditions should be taken into account to determine the actual thermal properties of asphalt concrete. There was no noticeable difference in thermal properties of asphalt concrete before and after aging. Furthermore, freezing–thawing cycles strongly affect the thermal properties of conductive asphalt concrete, due to volume expansion and bonding degradation.

  3. [Biological monitoring of PAH exposure among asphalt workers].

    Science.gov (United States)

    Campo, Laura; Calisti, Roberto; Polledri, Elisa; Barretta, Francesco; Stopponi, Roberta; Massacesi, Stefania; Bertazzi, Pieralberto; Fustinoni, Silvia

    2011-01-01

    Aim of this work was the assessment of exposure to polycyclic aromatic hydrocarbons (PAHs) by urinary 1-hydroxypyrene (1-OHPyr) in asphalt workers. Median levels of 1-OHPyr resulted higher in asphalt workers than in controls (184 vs. < 20 ng/L, p < 0.001). The determinants of exposure of 1-OHPyr resulted smoking habit, the number of consecutive days at work and the job task; 1-OHPyr was also associated to urinary creatinine. End of work week 1-OHPyr is suggested as an useful indicator of occupational exposure to PAHs in bitumen fumes.

  4. Characterization and thermal behavior of polymer-modified asphalt

    Directory of Open Access Journals (Sweden)

    Maria da Conceição Cavalcante Lucena

    2004-12-01

    Full Text Available A styrene-butadiene-styrene modified asphalt cement was characterized by infrared, differential scanning calorimetry, thermogravimetric analysis and empirical tests such as ring and ball softening point, penetration and elastic recovery. After aging in the rolling thin-film oven, the polymer-modified asphalt presented structural changes relating to oxidation of the material. The infrared spectra showed an increase in hydroxyl groups and the formation of carbonyl compounds and sulphoxides. The percentage of crystallized fraction calculated from differential scanning calorimetry was 0.41%. Thermogravimetric analyses in inert and oxidative atmospheres revealed distinct events during thermal decomposition; the initial activation energies were similar, but changed as the process evolved.

  5. Criteria for asphalt-rubber concrete in civil airport pavements: Mixture design

    Science.gov (United States)

    Roberts, F. L.; Lytton, R. L.; Hoyt, D.

    1986-07-01

    A mixture design procedure is developed to allow the use of asphalt-rubber binders in concrete for flexible airport pavement. The asphalt-rubber is produced by reacting asphalt with ground, scrap tire rubber to produce the binder for the asphalt-rubber concrete. Procedures for laboratory preparation of alsphalt-rubber binders using an equipment setup that was found by researchers to produce laboratory binders with similar properties to field processes are included. The rubber-asphalt concrete mixture design procedure includes adjustments to the aggregate gradation to permit space for the rubber particles in the asphalt-rubber binder as well as suggested mixing and compaction temperatures, and compaction efforts. While the procedure was used in the laboratory to successfully produce asphalt-rubber concrete mixtures, it should be evaluated in the field to ensure that consistent results can be achieved in a production environment.

  6. Road safety effects of porous asphalt: a systematic review of evaluation studies

    DEFF Research Database (Denmark)

    Elvik, R.; Greibe, Poul

    2005-01-01

    This paper presents a systematic review of studies that have evaluated the effects on road safety of porous asphalt. Porous asphalt is widely used on motorways in Europe, mainly in order to reduce traffic noise and increase road capacity. A meta-analysis was made of six studies, containing a total...... of eighteen estimates of the effect of porous asphalt on accident rates. No clear effect on road safety of porous asphalt was found. All summary estimates of effect indicated very small changes in accident rates and very few were statistically significant at conventional levels. Studies that have evaluated...... the effects of porous asphalt on nine different risk factors associated with accident occurrence were also reviewed. It was found that four of the risk factors were favourably influenced by porous asphalt, three were adversely influenced, and two were not influenced by porous asphalt. The net impact...

  7. [Anesthetic management in a patient with head and neck burn by asphalt].

    Science.gov (United States)

    Suzuki, Nao; Niiyama, Yukitoshi; Tokinaga, Yasuyuki; Yamakage, Michiaki

    2013-10-01

    In cases of facial burns caused by molten asphalt, examination for possible airway burns and early removal of the asphalt should be carried out to prevent chemical-induced tissue damage and infection. However, asphalt that has adhered to tissues is difficult to remove. A 35-year-old male with burns caused by molten asphalt was scheduled for emergency debridement. He had 6% body surface area burns on his face and neck. He was not able to open his eyes due to the adherence of asphalt. His respiratory condition was stable and a perioperative fiberoptic view revealed no airway burns. After awake intubation, orange peel oil was used to remove the asphalt from his face and eyes. Since orange peel oil does not contain any harmful substances, it is effective for removing asphalt without causing tissue damage.

  8. The humoral immune response of mice exposed to simulated road paving-like asphalt fumes.

    Science.gov (United States)

    Anderson, Stacey E; Munson, Albert E; Tomblyn, Seth; Meade, B Jean; Diotte, Nicole M

    2008-07-01

    Asphalt is a complex mixture of organic molecules, including polycyclic aromatic hydrocarbons (PAH), which have been reported to cause serious adverse health effects in humans. Workers in manufacturing and construction trades exposed to asphalt are potentially at risk for being exposed to asphalt fumes and PAHs. Epidemiological investigations have collected mounting evidence that chemicals found in asphalt fumes present carcinogenic and possibly immunotoxic hazards. Studies evaluating the immunotoxic effects of asphalt fume are limited due to the large number of variables associated with asphalt fume exposures. This work investigates the immuno-toxic effects of road paving-like asphalt fume by analyzing the in vivo IgM response to a T-dependent antigen after exposure to whole, vapor, and particulate phase road paving-like asphalt fumes and asphalt fume condensate. Systemic exposures via intraperitoneal injection of asphalt fume condensate (at 0.625 mg/kg) and the particulate phase (at 5 mg/kg) resulted in significant reductions in the specific spleen IgM response to SRBC. Pharyngeal aspiration of the asphalt fume condensate (at 5 mg/kg) also resulted in significant suppression of the IgM response to SRBC. A significant reduction in the specific spleen IgM activity was observed after inhalation exposure to whole asphalt fumes (35 mg/m(3)) and the vapor components (11 mg/m(3)). Dermal exposures to the asphalt fume condensate resulted in significant reductions in the total (at 50 mg/kg) and specific (at 250 mg/kg) spleen IgM response to SRBC. These results demonstrate that exposure to road paving-like asphalt fumes is immunosuppressive through systemic, respiratory, and dermal routes of exposure in a murine model and raise concerns regarding the potential for adverse immunological effects.

  9. Analysis of Adhesive Characteristics of Asphalt Based on Atomic Force Microscopy and Molecular Dynamics Simulation.

    Science.gov (United States)

    Xu, Meng; Yi, Junyan; Feng, Decheng; Huang, Yudong; Wang, Dongsheng

    2016-05-18

    Asphalt binder is a very important building material in infrastructure construction; it is commonly mixed with mineral aggregate and used to produce asphalt concrete. Owing to the large differences in physical and chemical properties between asphalt and aggregate, adhesive bonds play an important role in determining the performance of asphalt concrete. Although many types of adhesive bonding mechanisms have been proposed to explain the interaction forces between asphalt binder and mineral aggregate, few have been confirmed and characterized. In comparison with chemical interactions, physical adsorption has been considered to play a more important role in adhesive bonding between asphalt and mineral aggregate. In this study, the silicon tip of an atomic force microscope was used to represent silicate minerals in aggregate, and a nanoscale analysis of the characteristics of adhesive bonding between asphalt binder and the silicon tip was conducted via an atomic force microscopy (AFM) test and molecular dynamics (MD) simulations. The results of the measurements and simulations could help in better understanding of the bonding and debonding procedures in asphalt-aggregate mixtures during hot mixing and under traffic loading. MD simulations on a single molecule of a component of asphalt and monocrystalline silicon demonstrate that molecules with a higher atomic density and planar structure, such as three types of asphaltene molecules, can provide greater adhesive strength. However, regarding the real components of asphalt binder, both the MD simulations and AFM test indicate that the colloidal structural behavior of asphalt also has a large influence on the adhesion behavior between asphalt and silicon. A schematic model of the interaction between asphalt and silicon is presented, which can explain the effect of aging on the adhesion behavior of asphalt.

  10. Effects of asphalt rejuvenator on thermal and mechanical properties on oxidized hot mixed asphalt pavements

    Science.gov (United States)

    Farace, Nicholas A.; Buttlar, William G.; Reis, Henrique

    2016-04-01

    The utilization of asphalt rejuvenator, and its effectiveness for restoring thermal and mechanical properties was investigated via Disk-shaped Compact Tension (DC(T)) and acoustic emission (AE) testing for determining mechanical properties and embrittlement temperatures of the mixtures. During the DC(T) testing the fracture energies and peak loads were used to measure the resistance of the rejuvenated asphalt to low temperature cracking. The AE testing monitored the acoustic emission activity while the specimens were cooled from room temperature to -40 °C to estimate the temperature at which thermal cracking began (i.e. the embrittlement temperature). First, a baseline response was obtained by obtaining the mechanical and thermal response of virgin HMA samples and HMA samples that had been exposed to oxidative aging for 36 hours at 135°C. The results showed the virgin samples had much higher peak loads and fracture energies than the 36 hours aged samples. Acoustic Emission showed similar results with the virgin samples having embrittlement temperatures 10 °C cooler than the 36 hours aged specimens. Then, overaged for 36 hours specimens were treated different amounts of rejuvenator (10%, 15%, and 20% by weight of binder content) and left to dwell for increased amount of time periods varying from one to eight weeks. It was observed that the AE results showed an improvement of embrittlement temperature with increasing with the dwell times. The 8 weeks specimens had cooler embrittlement temperatures than the virgin specimens. Finally, the low temperature effects on fracture energy and peak load of the rejuvenated asphalt was investigated. Rejuvenator was applied (10% by weight of binder) to specimens aged 36 hours at 135 °C, and the dwell time was varied from 1 to 4 weeks. The results showed that the peak loads were restored to levels of the virgin specimens, and the fracture energies improved to levels beyond that of the virgin specimens. The results also showed a

  11. 天然沥青改性沥青的表面自由能分析%Surface free energy analysis of asphalt modified with natural asphalt

    Institute of Scientific and Technical Information of China (English)

    马峰; 郝景贤; 傅珍; 汪立龙; 汪林兵

    2015-01-01

    In order to accurately evaluate the adhesion of asphalt modified with natural asphalt and aggregate,the contact angles of three liquids on the sample surface of asphalt modified with natural asphalt were measured based on sessile drop method.According to the theory of surface physical chemistry,the measuring method of polar component and dispersion component for asphalt surface free energy under the condition of room temperature was determined.The surface free energies of base asphalt and asphalts modified with different dosages of natural asphalt were calculated.The relationship between asphalt surface free energy and asphalt-aggregate adhesion grade was analyzed based on the test result by using water-boiling method.Test result shows that the surface free energies of 70 # grade A base asphalt and asphalt modified with 8% natural asphalt are 10.60,18.60 mJ ·m-2 respectively,so the surface free energy of asphalt modified with natural asphalt increases distinctly with the addition of natural asphalt.There is a good correlation between asphalt-aggregate adhesion and the surface free energy of asphalt calculated by contact angle method.The natural asphalt contains higher polar functional groups such as O, S and N etc.High contents of asphaltene and net structure can absorb the light components of base asphalt such as saturates,aromatics.The increase of surface free energy for asphalt modified with natural asphalt is attributed to the polar functional groups and the absorbing functions. 4 tabs,4 figs,23 refs.%为了准确评价天然沥青改性沥青与集料的粘附性能,采用座滴法测定了3种液体在天然沥青改性沥青试样表面的接触角,基于表面物理化学理论,确定了室温条件下沥青表面自由能极性分量和色散分量的测定方法,计算了基质沥青和不同掺量天然沥青改性沥青的表面自由能。结合水煮法试验结果,分析了沥青结合料表面自由能与沥青-集料粘附性等级的

  12. Design tool for the thermal energy potential of asphalt pavements

    NARCIS (Netherlands)

    Loomans, M.G.L.C.; Oversloot, H.P.; Bondt, A. de; Jansen, R.; Rij, H. van

    2003-01-01

    This paper describes the development of a design tool for the calculation of the thermal energy potential of a so-called asphalt collector. Two types of numerical models have been developed and validated against experimental results from a full-scale test-site. The validation showed to be a tedious

  13. Sinopec Wins Bid for Special Asphalt for Racing Track

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ On February 13 Sinopec and Shanghai International Circuit held a signing ceremony in Beijing for the contract to supply special asphalt for racing track use. Mr. Wang Jiming,Vice Board Chairman and President of Sinopec and Mr. Wang Tianpu, Senior Vice President of Sinopec, attended the ceremony.

  14. The adoption of innovative asphalt equipment in road construction

    NARCIS (Netherlands)

    Habets, Thijs; Voordijk, Hans; Sijde, van der Peter

    2011-01-01

    Purpose – The purpose of this paper is to provide insight into the adoption process of innovative asphalt equipment in road construction and how the level of knowledge as characterised by the level of education in the companies affects this process. The emphasis is on equipment used for transporting

  15. Performance of Recycled Asphalt Pavement as Coarse Aggregate in Concrete

    Directory of Open Access Journals (Sweden)

    Fidelis O. OKAFOR

    2010-12-01

    Full Text Available Recycled asphalt pavement (RAP is the reclaimed and reprocessed pavement material containing asphalt and aggregate. Most RAP is recycled back into pavements, and as a result there is a general lack of data pertaining to the mechanical properties for RAP in other possible applications such as Portland cement concrete. In the present study, some mechanical properties of Portland cement concrete containing RAP as coarse aggregate were investigated in the laboratory. Six concrete mixes of widely differing water/cement ratios and mix proportions were made using RAP as coarse aggregate. The properties tested include the physical properties of the RAP aggregate, the compressive and flexural strengths of the concrete. These properties were compared with those of similar concretes made with natural gravel aggregate. Results of the tests suggest that the strength of concrete made from RAP is dependent on the bond strength of the “asphalt-mortar” (asphalt binder-sand-filler matrix coatings on the aggregates and may not produce concrete with compressive strength above 25 MPa. However, for middle and low strength concrete, the material was found to compare favorably with natural gravel aggregate.

  16. Performance related characterisation of the mechanical behaviour of asphalt mixtures

    NARCIS (Netherlands)

    Molenaar, J.M.M.

    2004-01-01

    The investigation was undertaken to support innovations in the field of asphalt pavement design and material selection, and to be able to evaluate or judge the risk of failure and cost-effectiveness of newly developed paving materials in order to justify their application. To be able to determine th

  17. Assessment of Water Quality of Runoff from Sealed Asphalt Surfaces

    Science.gov (United States)

    This report discusses the results of runoff tests from recently-sealed asphalt surfaces conducted at EPA's Urban Watershed Research Facility (UWRF) in Edison, New Jersey. Both bench-scale panels and full-scale test plots were evaluated. Full-scale tests were performed on an asp...

  18. Asphalt and Wood Shingling. Roofing Workbook and Tests.

    Science.gov (United States)

    Brown, Arthur

    This combination workbook and set of tests contains materials on asphalt and wood shingling that have been designed to be used by those studying to enter the roofing and waterproofing trade. It consists of seven instructional units and seven accompanying objective tests. Covered in the individual units are the following topics: shingling…

  19. Compressive Strength Development and Microstrueture of Cement.asphalt Mortar

    Institute of Scientific and Technical Information of China (English)

    WANG Qiang; YAN Peiyu; KONG Xiangming; YANG Jinbo

    2011-01-01

    The compressive strength developing process and the microstructure of cement-asphalt mortar (CA mortar) were investigated.The fluidity of CA mortar has a great influence on its strength.The optimum value of spread diameter of slump flow test is in the range of 300 to 400 mm.The compressive strength of CA mortar keeps a relatively high growth rate in 56 days and grows slowly afterwards.The residual water of hydration in CA mortar freezes under minus environmental temperature which can lead to a significant reduction of the strength of CA mortar.Increasing A/C retards asphalt emulsion splitting and thus prolongs the setting process of CA mortar.The hydration products of cement form the major structural framework of hardened CA mortar and asphalt is a weak phase in the framework but improves the viscoelastic behavior of CA mortar.Therefore,asphalt emulsion should be used as much as possible on the condition that essential performance criterions of CA mortar are satisfied.

  20. Optimal formulations of some asphalt concrete roadway protective impregnation compositions

    Directory of Open Access Journals (Sweden)

    Yulia A. Ubas’kina

    2016-03-01

    Full Text Available The current paper describes optimization of the formulations of asphalt concrete roadway protective impregnation compositions based on BND 60/90 bitumen modified with petroleum resin. Physicochemical, technological and operating parameters of the prepared samples of the compositions are investigated.

  1. Mechanistic and Economical Characteristics of Asphalt Rubber Mixtures

    Directory of Open Access Journals (Sweden)

    Mena I. Souliman

    2016-01-01

    Full Text Available Load associated fatigue cracking is one of the major distress types occurring in flexible pavement systems. Flexural bending beam fatigue laboratory test has been used for several decades and is considered to be an integral part of the new superpave advanced characterization procedure. One of the most significant solutions to prolong the fatigue life for an asphaltic mixture is to utilize flexible materials as rubber. A laboratory testing program was performed on a conventional and Asphalt Rubber- (AR- gap-graded mixtures to investigate the impact of added rubber on the mechanical, mechanistic, and economical attributes of asphaltic mixtures. Strain controlled fatigue tests were conducted according to American Association of State Highway and Transportation Officials (AASHTO procedures. The results from the beam fatigue tests indicated that the AR-gap-graded mixtures would have much longer fatigue life compared with the reference (conventional mixtures. In addition, a mechanistic analysis using 3D-Move software coupled with a cost analysis study based on the fatigue performance on the two mixtures was performed. Overall, analysis showed that AR modified asphalt mixtures exhibited significantly lower cost of pavement per 1000 cycles of fatigue life per mile compared to conventional HMA mixture.

  2. Some Properties of Emulsified Asphalt Paving Mixture at Iraqi Environmental Conditions

    Directory of Open Access Journals (Sweden)

    Shakir.A.Al-Mishhadani

    2014-02-01

    Full Text Available Cold emulsified asphalt mixture is generally a mix made of emulsified asphalt withaggregate. Emulsified asphalt is manufactured from base asphalt, emulsifier agent and waterwith approximate percentage of 40% to 75% asphalt, 0.1% to 2.5% emulsifier and 25% to60% water plus some minor components. This study aims to use the cold emulsified asphaltmixtures for road construction and maintenance in Iraq as an alternative to the hot asphaltmixtures, due to its economical, practical and environmental advantages. This studyfocusedto test and evaluates the emulsified asphalt material properties to be used as paving mixture.The tested properties of emulsified asphalt mixture were bulk density, air voids, dry Marshallstability, wet Marshall stability, retained Marshall stability, flow tests and compared with thecommon used specification.The results indicate that the emulsified asphalt type cationic slowsetting low viscosity (CSS-1 is very suitable with quartz type of aggregate from Al-Nibaayquarry. From many trial mixes it is found that the best percentages of initial residual bitumencontent to produced adequateresults for coating test ,mixing ,compaction ,curing and Marshallstability were ranged from (2.5%, 3%,3.5%,4% and 4.5%, andthe optimum percentage is(3.5%.Finally it can be conducted that the emulsified asphalt mixture is a suitable alternativemixture to the hot asphalt mixture for road construction and maintenance in Iraq.

  3. Some Properties of Emulsified Asphalt Paving Mixture at Iraqi Environmental Conditions

    Directory of Open Access Journals (Sweden)

    Shakir.A.Al-Mishhadani* Hasan.H.Al-Baid

    2014-04-01

    Full Text Available Cold emulsified asphalt mixture is generally a mix made of emulsified asphalt withaggregate. Emulsified asphalt is manufactured from base asphalt, emulsifier agent and waterwith approximate percentage of 40% to 75% asphalt, 0.1% to 2.5% emulsifier and 25% to60% water plus some minor components. This study aims to use the cold emulsified asphaltmixtures for road construction and maintenance in Iraq as an alternative to the hot asphaltmixtures, due to its economical, practical and environmental advantages. This studyfocusedto test and evaluates the emulsified asphalt material properties to be used as paving mixture.The tested properties of emulsified asphalt mixture were bulk density, air voids, dry Marshallstability, wet Marshall stability, retained Marshall stability, flow tests and compared with thecommon used specification.The results indicate that the emulsified asphalt type cationic slowsetting low viscosity (CSS-1 is very suitable with quartz type of aggregate from Al-Nibaayquarry. From many trial mixes it is found that the best percentages of initial residual bitumencontent to produced adequateresults for coating test ,mixing ,compaction ,curing and Marshallstability were ranged from (2.5%, 3%,3.5%,4% and 4.5%, andthe optimum percentage is(3.5%.Finally it can be conducted that the emulsified asphalt mixture is a suitable alternativemixture to the hot asphalt mixture for road construction and maintenance in Iraq.  

  4. Evaluation system for CO2 emission of hot asphalt mixture

    Directory of Open Access Journals (Sweden)

    Bo Peng

    2015-04-01

    Full Text Available The highway construction industry plays an important role in economic and development, but is also a primary source of carbon emission. Accordingly, with the global climate change, energy conservation and reduction of carbon emissions have become critical issues in the highway construction industry. However, to date, a model for the highway construction industry has not been established. Hence, to implement a low-carbon construction model for highways, this study divided asphalt pavement construction into aggregate stacking, aggregate supply, and other stages, and compiled a list of energy consumption investigation. An appropriate calculation model of CO2 emission was then built. Based on the carbon emission calculation model, the proportion of carbon emissions in each stage was analyzed. The analytic hierarchy process was used to establish the system of asphalt pavement construction with a judgment matrix, thereby enabling calculation of the weight coefficient of each link. In addition, the stages of aggregate heating, asphalt heating, and asphalt mixture mixing were defined as key stages of asphalt pavement construction. Carbon emissions at these stages accounted for approximately 90% of the total carbon emissions. Carbon emissions at each stage and their impact on the environment were quantified and compared. The energy saving construction schemes as well as the environmental and socioeconomic benefits were then proposed. Through these schemes, significant reductions in carbon emissions and costs can be achieved. The results indicate that carbon emissions reduce by 32.30% and 35.93%, whereas costs reduce by 18.58% and 6.03%. The proposed energy-saving and emission reduction scheme can provide a theoretical basis and technical support for the development of low-carbon highway construction.

  5. Towards small scale use of asphalt as a fuel. An application of interest to developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Faber, J.

    2002-01-01

    This survey deals with the feasibility of the combustion of asphalt instead of firewood. On the seashores of the numerous islands of Indonesia, especially on those of south and southeast Sulawesi, mangrove forests are endangered by extensive logging, lately on an increasing scale by locals for whom firewood is the sole resource of energy. Urged by Yayasan-Sarna, an Indonesian non-governmental organisation of South East Sulawesi, the Dutch foundation Zephyr-Sama has prompted research on the feasibility to use asphalt from deposits on the island of Buton as a domestic fuel. This research was thought to possibly lead to the development of a porous plug stove, or to a stove in which carbonised bamboo containers filled with asphalt are used as fuel elements. This survey consists of a literature review and an overview of possible routes for controlled combustion of asphalt. Attention has been paid to the environmental effects of the combustion as well. The literature mainly shows side effects of combustion of asphalt, which provide some knowledge on the combustion process. No direct studies on the combustion of asphalt were found. To explore the bottlenecks of the combustion process, an asphalt candle was made, because the taper seemed an ideal capillary active carrier for fluid asphalt. However, this experimental candle did not bum, likely due to high viscosity at the base of the taper and clogging of carbonaceous residue at the liquid/gas interface of the taper. An increase of the porosity of asphalt gives a better chance for a propagating combustion. The pores may increase the diffusion rate of volatile components, thus increasing the combustion rate. However, if asphalt is heated it will melt and the fluid will block the pores. Its melting at a relatively low temperature is a big handicap of asphalt. To overcome this handicap, asphalt could be transported by capillary forces into the combustion zone and combust at solid/liquid/gas interfaces - like is happening in a

  6. Lymphocyte DNA damage in Turkish asphalt workers detected by the comet assay.

    Science.gov (United States)

    Bacaksiz, Aysegul; Kayaalti, Zeliha; Soylemez, Esma; Tutkun, Engin; Soylemezoglu, Tulin

    2014-01-01

    Asphalt has a highly complex structure and it contains several organic compounds including polycyclic aromatic hydrocarbons and heterocyclic compounds. In this study, comet assay was used to detect the DNA damage in blood lymphocytes of 30 workers exposed to asphalt fumes and 30 nonexposed controls. This is the first report on Turkish asphalt workers' investigated DNA damage using the alkaline single cell gel electrophoresis (SCGE). The DNA damage was evaluated by the percentage of DNA in the comet tail (% tail DNA) for each cell. According to our results, workers exposed to asphalt fumes had higher DNA damage than the control group (p asphalt fumes caused a significant increase in DNA damage and the comet assay is a suitable method for determining DNA damage in asphalt workers.

  7. Influence of limestone fillers on combustion characteristics of asphalt mortar for pavements

    DEFF Research Database (Denmark)

    Ke, Wu; Kai, Zhu; Wu, Hao;

    2014-01-01

    Asphalt materials will be ignited and release significant toxic fumes within tunnel fires. Thus, combustion characteristics of asphalt materials used in road tunnel should be studied in order to limit such an adverse effect. In the present work we study the influence of limestone fillers...... on combustion characteristics of asphalt mortar by thermogravimetric and kinetic analysis. It is shown that the combustion of asphalt mortar is not just a linear superposition of asphalt and limestone. The limestone will increase the ignition point and the activation energy of the primary volatile release......, and will catalyze the char formation from the primary volatile release. Kinetic analysis shows that the primary volatile release stage of asphalt mortar combustion can be explained by a three-dimensional diffusion model, the secondary volatile release and char combustion stage can be explained by a model under...

  8. SGC tests for influence of material composition on compaction characteristic of asphalt mixtures.

    Science.gov (United States)

    Chen, Qun; Li, Yuzhi

    2013-01-01

    Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture) was studied using Superpave gyratory compactor (SGC) simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show that, for the mixture with a bigger content of asphalt, its density increases faster, that there is an optimal amount of fine aggregates for optimal compaction and that an appropriate amount of mineral powder will improve workability of mixtures, but overmuch mineral powder will make mixtures dry and hard. Conclusions based on SGC tests can provide basis for how to adjust material composition for improving compaction performance of asphalt mixtures, and for the designed asphalt mixture, its compaction performance can be predicted through these conclusions, which also contributes to the choice of compaction schemes.

  9. Decision of National and Provincial Highway Asphalt Pavement Structure Based on Value Engineering

    Directory of Open Access Journals (Sweden)

    Yingwei Ren

    2014-01-01

    Full Text Available It is important that decision of asphalt pavement structure requires overall considerations of the performance and financial investment. To have asphalt pavement structure fulfilling good reliability, the asphalt pavement structure decision was researched based on value engineering theory. According to the national and provincial highway investigation data in Shandong Province during the last decade, the asphalt pavement performance attenuation rules of traffic levels and asphalt layer thicknesses were developed, and then the road performance evaluation method was presented. In addition, the initial investments, the costs of road maintenance, and middle-scale repair in a period were analyzed. For the light traffic and medium traffic example, using the value engineering method, the pavement performance and costs of which thickness varies from 6 cm to 10 cm were calculated and compared. It was concluded that value engineering was an effective method in deciding the asphalt pavement structure.

  10. The reinforcement and healing of asphalt mastic mixtures by rejuvenator encapsulation in alginate compartmented fibres

    Science.gov (United States)

    Tabaković, A.; Post, W.; Cantero, D.; Copuroglu, O.; Garcia, S. J.; Schlangen, E.

    2016-08-01

    This paper explores the potential use of compartmented alginate fibres as a new method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are employed to locally distribute the rejuvenator and to overcome the problems associated with spherical capsules and hollow fibres. The work presents proof of concept of the encapsulation process which involved embedding the fibres into the asphalt mastic mixture and the survival rate of fibres in the asphalt mixture. To prove the effectiveness of the alginate as a rejuvenator encapsulating material and to demonstrate its ability survive asphalt production process, the fibres containing the rejuvenator were prepared and subjected to thermogravimetric analysis and uniaxial tensile test. The test results demonstrated that fibres have suitable thermal and mechanical strength to survive the asphalt mixing and compaction process. The CT scan of an asphalt mortar mix containing fibres demonstrated that fibres are present in the mix in their full length, undamaged, providing confirmation that the fibres survived the asphalt production process. In order to investigate the fibres physiological properties and ability to release the rejuvenator into cracks in the asphalt mastic, the environmental scanning electron microscope and optical microscope analysis were employed. To prove its success as an asphalt healing system, compartmented alginate fibres containing rejuvenator were embedded in asphalt mastic mix. The three point bend tests were performed on the asphalt mastic test samples and the degree to which the samples began to self-heal in response was measured and quantified. The research findings indicate that alginate fibres present a promising new approach for the development of self-healing asphalt pavement systems.

  11. Development of an innovative bio-binder using Asphalt-rubber technology

    OpenAIRE

    2013-01-01

    This research work evaluates several parameters that can affect Asphalt Rubber (AR) binder performance and applies the AR technology to the development of an innovative renewable bio-binder that can fully and cost-effectively replace asphaltic bitumen derived from petroleum in flexible pavement construction. The “Binder Accelerated Separator” method was used to divide the constituents of the Asphalt Rubber and bio-binder (residual binder and swelled rubber). The physical and chemi...

  12. INVESTIGATING EFFECTS OF AMINE BASED MODIFIER ON RECYCLED ASPHALT SHINGLES BLENDING

    OpenAIRE

    2014-01-01

    A laboratory study was conducted to investigate the effects of Amine based modifier on rheological characteristics of particle filled viscous medium such as asphalt binder in presence of Recycled Asphalt Shingles (RAS). In this study, virgin asphalt binder (PG 64-22), three different percentages (20, 30 and 40%) of tear-off shingles and modifiers; Rediset, Evotherm and Bio-binder were used. The tear-off shingles acquired from local reroofing company in Greensboro, North Carolina; were finely ...

  13. Laboratory and Field Evaluation of In-Place Asphalt Recycling Technologies for Small Airfield Repair

    Science.gov (United States)

    2013-06-01

    Recommendation of materials, equipment and process for in-place asphalt recycling Part I Laboratory Evaluation RAP Material Characterization • Binder...laboratory testing based upon their chemical properties and costs. Reclaimed asphalt pavement ( RAP ) material was obtained from both test sites for...Part I of this study was to conduct laboratory testing to:  characterize the reclaimed asphalt pavement ( RAP ) from the test sites,  evaluate how

  14. Engineering and Design: Use of Petroleum Contaminated Soil in Cold-Mix Asphalt Stabilized Base Course

    Science.gov (United States)

    2007-11-02

    and construction of mixtures using petroleum contaminated soil and similar hydrocarbon waste for cold -mix asphalt stabilized base course (ASB). This...also performed an analysis using the diesel contaminated soil as part of a cold mix asphalt mixture . The mixtures produced with and without contaminated...quality materials ( RAP and asphalt cement) and good mixture design, construction procedures, and quality control, a high quality base or intermediate

  15. Mechanism of Fume Suppression and Performance on Asphalt of Expanded Graphite for Pavement under High Temperature Condition

    Institute of Scientific and Technical Information of China (English)

    HUANG Gang; HE Zhaoyi; HUANG Yangcheng; ZHOU Chao; YUAN Xiaoya

    2014-01-01

    Fume suppression mechanisms and the effect of expanded graphite on the performance of asphalt were studied by applying infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and comprehensive thermal analysis (TG, DSC). The experimental results confirm that asphalt which is mixed with expandable graphite will expand in the process of hot mix, and the expanded graphite layer will swell by the light component in the asphalt. The light component in the asphalt and PAHs adsorption on expanded graphite surface or part of the plug in the expanded graphite layer between plates made nucleation crystallization growth. And the Van der Waals force and the bonding of the lattice can effectively restrain the asphalt fume release. Meanwhile, the expanding agent with oxidative can spread into the asphalt, leading to asphalt oxygenated and plastic abate, while the ductility decreases. Expanded graphite, SBS modifier and environment- friendly plasticizers are used to composite modified asphalt. According to asphalt fume release experiment, normal test of asphalt performance, Brookfield viscosity test, RTFOT test and asphalt mixture tests (high temperature stability, low temperature stability, water stability), it has been proven that the modified asphalt’s performance is better than that of matrix asphalt and equivalent to that of SBS modified asphalt. Furthermore, it has good fume suppression effect.

  16. Effects of Fibre Additive on the High Temperature Property of Asphalt Binder

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Polyester fibre and floc xylogen fibre were used to prepare fibre-asphalt binder.An SHRP's dynamic shear rheometer (DSR) was employed to investigate the rheology charac teristics of fibre-asphalt binder, andthe flow resistance of binder was revealed by combining the rutting parameter, G * / sinδ.The results indicate that both kinds of fibres remarkably improved the high temperature pe~orrnance of asphalt binder.At the same time, the reinforcement mechanism of the fibres in the asphalt binder was also analyzed.

  17. Assessing Mechanical Properties of Hot Mix Asphalt with Wire Wool Fibers

    OpenAIRE

    Ahmed N. Bdour; Yahia Khalayleh; Aslam A. Al-Omari

    2015-01-01

    This paper investigates the potential application of wire wool in the modification of hot asphalt mixes (HMA). Wire wool material is widely available at local markets as a by-product of wire wool industry and as waste products from homes. For the purpose of this study, wire wool was cut into small pieces so that it can be placed in the asphalt mixes. Different percentages of wire wool were incorporated with the hot asphalt mixes (0.0%, 0.25%, and 0.5%) of the total weight of the asphalt binde...

  18. Influence of crumb rubber and digestion time on the asphalt rubber binders

    OpenAIRE

    Neto, Silvrano Adonias Dantas; De Farias, Márcio Muniz; Pais, Jorge C.; Pereira, Paulo A. A.; Sousa, Jorge B.

    2006-01-01

    This paper shows the results of a study about the mechanical behavior of dense graded asphalt-rubber hot mixes prepared with two different types of asphalt-rubber binders. These asphalt-rubber binders were obtained with penetration grade asphalt (AC 50/70) mixed with 21% and 25% of crumb rubber in weight. The rubber was recycled from unserviceable tires using the ambient grinding process. Hot mixes made with the conventional binder AC 50/70 were also studied for comparison. The...

  19. The Silurian Reservoir Bed-Differentiated Asphalts in Tarim Basin and Modeling Experiments on Their Origin

    Institute of Scientific and Technical Information of China (English)

    刘洛夫; 刘宏江; 王洪玉; 曾溅辉

    2002-01-01

    There is a type of asphalt that originated from differentiation from reservoir bed (named reservoir bed-differentiated asphalt) in the Silurian asphaltic sandstones of the Tarim Basin. These asphalts are the result of second-time charging of hydrocarbons into the Silurian reservoir, which were derived from Lower Paleozoic source rocks. Asphalt was differentiated from the reservoir bed in the hydrocarbon gathering area of secondary migration. The differen tiation is caused by changes in reservoir physical properties when pearl or chain hydrocarbons migrating through and gathering in the reservoir bed, and light components are lost and heavy ones are involved in the formation of asphalt or heavy oil. There are two kinds of occurrence of these asphalts in the Silurian system of the Tarim Basin. One is the poor heavy oil layer with lower oil saturation in trap and the other is scattered hydrocarbon distributed along the transport layer and unconformity surface. Reservoir bed-differentiated asphalts have two characteristics: total hydrocarbon content is high in extractable organic matter and the ratio of saturated to aromatic hydrocarbon is usually greater than unity. The physically modeling experiment has confirmed these characteristics and the genesis of the reservoir bed-differentiated asphalts.

  20. Optimization of technical measures for improving high-temperature performance of asphalt-rubber mixture

    Institute of Scientific and Technical Information of China (English)

    Chuan Xiao; Tianqing Ling; Yanjun Qiu

    2013-01-01

    Asphalt-rubber pavements often become dam-aged in high-temperature regions and appear rutted or wavy, and experience slippage. To improve the high-tem-perature performance of the asphalt-rubber mixture, tech-nical measurements, such as, the optimal adjustment of gradation, technique of composite modification, and con-trol of compaction were investigated. An optimal adjust-ment of aggregate gradation based on stone matrix asphalt improves the high-temperature stability of the asphalt-rubber mixture significantly. Through composite modifi-cation, the effect of asphalt-rubber modification was enhanced, and the dynamic stability and relative defor-mation indices of the asphalt-rubber mixture were improved significantly. Furthermore, compaction parame-ters had a significant influence on the high-temperature stability of the asphalt-rubber mixture. The rolling times for compacting the asphalt-rubber mixture should be controlled to within 18-20 round-trips at a molding tem-perature at 180 ?C;if the rolling time is a 12 round-trip, the compaction temperature of the asphalt-rubber mixture should be controlled between 180 and 190 ?C.

  1. Full-Scale Accelerated Pavement Testing of Warm-Mix Asphalt (WMA) for Airfield Pavements

    Science.gov (United States)

    2014-01-01

    ER D C/ G SL T R -1 4 -3 Full-Scale Accelerated Pavement Testing of Warm-Mix Asphalt (WMA) for Airfield Pavements G eo te ch n ic al...2014 Full-Scale Accelerated Pavement Testing of Warm-Mix Asphalt (WMA) for Airfield Pavements Mariely Mejías-Santiago, Jesse D. Doyle, and John F... asphalt (WMA) mixtures designed for airfield pavements. Three WMA mixtures were evaluated and compared to a control hot-mix asphalt (HMA) mixture. Data

  2. The Silurian Reservoir Bed—Differentiated Asphalts in Tarim Basin and Modeling Experiments on Their Origin

    Institute of Scientific and Technical Information of China (English)

    刘洛夫; 刘宏江; 等

    2002-01-01

    There is a type of asphalt that originated from differentiation from reservoir bed (named reservoir bed-differentiated asphalt)in the Silurian asphaltic sandstones of the Tarim Basin.These asphalts are the result of second-time charging of hydrocarbons into the Silurian reservoir,which were derived from Lower Paleozoic source rocks.Asphalt was differentiated from the reservoir bed in the hydrocarbon gathering area of secondary migration.The different-tiation is caused by changes in reservoir physical properties when pearl or chain hydrocarbons migrating through and gathering in the reservoir bed,and light components are lost and heavy ones are involved in the formation of asphalt or heavy oil.There are two kinds of occurrence of these asphalts in the Silurian system of the Tarim Basin.One is the poor heavy oil layer with lower oil saturation in trap and the other is scattered hydrocarbon distributed along the trans-port layer and unconformity surface.Reservoir bed-differentiated asphalts have two characteris-tics:total hydrocarbon content is high in extractable organic matter and the ratio of saturated to aromatic hydrocarbon is usually greater than unity.The physically modeling experiment has confirmed these characteristics and the genesis of the reservoir bed-differentiated asphalts.

  3. An atomistic-based chemophysical environment for evaluating asphalt oxidation and antioxidants.

    Science.gov (United States)

    Pan, Tongyan; Sun, Lu; Yu, Qifeng

    2012-12-01

    Asphalt binders in service conditions are subject to oxidative aging that involves the reactions between oxygen molecules and the component species of bulk asphalt. As a result, significant alterations can occur to the desired physical and/or mechanical properties of asphalt. A common practice to alleviate asphalt aging has been to employ different chemical additives or modifiers as antioxidants. The current state of knowledge in asphalt oxidation and antioxidant evaluation is centered on determining the degradation of asphalt physical properties, mainly the viscosity and ductility. Such practices, although meeting direct engineering needs, do not contribute to the fundamental understanding of the aging and anti-oxidation mechanisms, and thereby developing anti-aging strategies. From this standpoint, this study was initiated to study the chemical and physical bases of asphalt oxidation, as well as the anti-oxidation mechanisms of bio-based antioxidants using the coniferyl-alcohol lignin as an example. A quantum chemistry (QC) based chemophysical environment is developed, in which the various chemical reactions between asphalt component species and oxygen, as well as the incurred physical changes are studied. X-ray photoelectron spectroscopy (XPS) was used to validate the modified and unmodified asphalt models.

  4. Application of minerals residues in the asphalt composition; Aplicacao de residuos minerais na composicao do asfalto

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Roberto Carlos da C.; Seidl, Peter Rudolf [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Correia, Julio Cesar Guedes [Centro de Tecnologia Mineral - CETEM, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The performance of asphalt pavements depends mainly on the properties of their constituents: mineral aggregates and asphalt cement. The mineral aggregate represents about 95% in weight of asphalt mixtures having a significant influence on the properties and performance of these mixtures. Asphalt cement (CAP) corresponds to the smaller fraction but it is mainly responsible for adsorption on the mineral aggregates. The objective of this study was to evaluate the interaction between different CAPs with residues from granite saw wills in place of mineral aggregates that run up costs with extraction and processing in asphalt production. This way asphalt production costs as well as the environmental problems that are caused by mineral residue are reduced. Five different asphalt cements, referred to as A, B, C, D and E, and a granite residue were used in this work. The results indicated that the residue strongly absorbs all the CAPs that were studied; particularly CAP A, which is considered the most adequate for the production of asphalt from this residue. Preliminary tests this indicate that asphalt production can use mineral residues instead of mineral aggregates in its composition. (author)

  5. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts.

    Science.gov (United States)

    Zhang, Feng; Yu, Jianying; Wu, Shaopeng

    2010-10-15

    Oxidative ageing as an inevitable process in practical road paving has a great effect on the properties of polymer-modified asphalts (PMAs). In this article, the effect of short-term and long-term oxidative ageing on the rheological, physical properties and the morphology of the styrene-butadiene-styrene (SBS)- and storage-stable SBS/sulfur-modified asphalts was studied, respectively. The analysis on the rheological and physical properties of the PMAs before and after ageing showed the two major effects of ageing. On one hand, ageing prompted the degradation of polymer and increased the viscous behaviour of the modified binders, on the other, ageing changed the asphalt compositions and improved the elastic behaviour of the modified binders. The final performance of the aged binders depended on the combined effect. After ageing, the storage-stable SBS/sulfur-modified asphalts showed an obvious viscous behaviour compare with the SBS-modified asphalts and this led to an improved low-temperature creep property. The rutting resistance of the SBS-modified asphalts declined by the addition of sulfur due to the structural instability of the SBS/sulfur-modified asphalts. The rheological properties of the modified binders before and after ageing also depended strongly on the structural characteristics of SBS. The observation by using optical microscopy showed the compatibility between asphalt and SBS was improved with further ageing, especially for the storage-stable SBS/sulfur-modified asphalts.

  6. Preparation, Characterization and Hot Storage Stability of Asphalt Modified by Waste Polyethylene Packaging

    Institute of Scientific and Technical Information of China (English)

    Changqing Fang; Ying Zhang; Qian yu; Xing Zhou; Dagang Guo; Ruien Yu; Min Zhang

    2013-01-01

    Waste polyethylene packaging (WPE) was used to modify asphalt,and hot storage stability of the modified asphalt was studied in this paper.The morphological change and component loss of WPE modified asphalt were characterized by fluorescence microscopy,Fourier transform infrared spectroscopy (FT-IR),differential scanning calorimetry (DSC),thermogravimetry (TG) and isolation testing.In addition,the mechanism of the hot storage stability of WPE modified asphalt was discussed.The results showed that the modification of asphalt with WPE was a physical process.It was found that the filament or partly network-like structure formed in the modified asphalt system was beneficial to improving the hot storage stability.Moreover,the addition of WPE resulted in a decrease in both the light components volatilization and the macromolecules decomposition of asphalt.It was demonstrated that when the content of WPE in matrix asphalt was less than 10 wt%,the service performances of modified asphalt could be better.

  7. The Effect of Thermal Stress on Asphalt Workers’ Function and Their Physiological Parameters

    OpenAIRE

    RAMAZAN MIRZAEI; ROOHALAH HAJIZADEH; KEYKAOUS AZRAH; MOHAMMADHOSEIN BEHESHTI

    2015-01-01

    Heat stress effects on physical and mental health of workers and decreases human function. Asphalt workers are both exposed to the heat of their working process and to the sun heat. This study aimed at evaluating thermal stress and its following function fall and the effect of asphalt work on the degree of heat stress and asphalt workers’ physiological parameters. The present study was done at the work location of 29 asphalt workers in Qum City,  central  Iran.  The  degree  of  thermal stres...

  8. ENHANCING ASPHALT RHEOLOGICAL BEHAVIOR AND AGING SUSCEPTIBILITY USING BIO-CHAR AND NANO-CLAY

    OpenAIRE

    2014-01-01

    The life expectancy of Asphalt Binder (AB) has been negatively impacted by the harsh bombardment of UV rays. UV rays cause asphalt to oxidize faster, which results in deterioration of asphalt rheological characteristics that can lead to pavement distresses. This study investigates the impact of bio-char and nano-clay of asphalt rheological properties. Two nano scale materials were used for this study were nano-clay and bio-char. Nano-clay (Cloisite 30B) is a naturally occurring inorganic mine...

  9. Evaluation of rheological and thermic properties of neat and modified asphalt with a waste of LDPE

    Directory of Open Access Journals (Sweden)

    William Andrés Castro López

    2016-01-01

    Full Text Available Context: The asphalt technology and modified asphalt mixtures has been widely used and studied, worldwide. Adding polymers to asphalt modifies mechanical, chemical and rheological properties, trying to improve behavior of the mixtures subjected to different environmental and load conditions. The paper report results from rheological and thermal characterization on conventional 60-70 asphalt cement and 60-70 asphalt cement modified by introducing a waste of low density polyethylene (LDPE. Method: Modification of the asphalt was performed by wet way in a proportion of LDPE/CA=5% with respect to the mass. Rheological (using DSR, Thermogravimetry (TGA and Differential Scanning Calorimetry (DSC techniques were performed. Results and Conclusions: The modified asphalt develops a remarkable increase in stiffness and improvement of the performance grade at high temperatures of service. Additionally, the modified asphalt is more resistant to oxidation and aging processes due to heat. However, the asphalt modified showed a decrease in crack resistance at low and intermediate temperatures of service.

  10. USE OF CRUMB RUBBER FROM USED CAR TIRES IN MINERAL ASPHALT MIXES

    Directory of Open Access Journals (Sweden)

    Andrzej Plewa

    2014-11-01

    Full Text Available With the development of the automotive industry the disposal of used tires is constantly growing problem. Storage of waste rubber is associated with a very long period of decomposition of rubber in the natural conditions. Simultaneously new technologies are developed every year, which in the future may significantly promote recycling of this type of materials. The crumb rubbery modification of the road bitumen is the one of the environmentally safe solutions of rubbery decomposition. Improvement of resistance of the crumb rubbery modification of the road asphalt mixtures is the very important ecological aspect of the future. The article presents the results of research on the fatigue life resistance of asphalt concretes AC16P and AC22P with asphalt-rubber binders. The above analyses have been based on the results of tests of fatigue life of mineral-rubber-asphalt mixes determined by the method of prismatic four-point bending (4PB-PR. Mineral-rubber -asphalt mixes have been diversified according to the amount of the additive of rubber fines in asphalt-rubber binder. On the basis of the test results have been proven improvements functional properties mineral-rubber-asphalt mixes compared with mineral-asphalt mixes with unmodified asphalt.

  11. Laboratory and field evaluation of hot mix asphalt with high contents of reclaimed asphalt pavement

    Science.gov (United States)

    Van Winkle, Clinton Isaac

    Currently in Iowa, the amount of RAP materials allowed for the surface layer is limited to 15% by weight. The objective of this project was to develop quality standards for inclusion of RAP content higher than 15% in asphalt mixtures. To meet Superpave mix design requirements, it was necessary to fractionate the RAP materials. Based on the extensive sieve-by-sieve analysis of RAP materials, the optimum sieve size to fractionate RAP materials was identified. To determine if the higher percentage of RAP materials than 15% can be used in Iowa's state highway, three test sections with 30.0%, 35.5% and 39.2% of RAP materials were constructed on Highway 6 in Iowa City. The construction of the field test sections was monitored and the cores were obtained to measure field densities of test sections. Field mixtures collected from test sections were compacted in the laboratory in order to test the moisture sensitivity using a Hamburg Wheel Tracking Device. The binder was extracted from the field mixtures with varying amounts of RAP materials and tested to determine the effects of RAP materials on the PG grade of a virgin binder. Field cores were taken from the various mix designs to determine the percent density of each test section. A condition survey of the test sections was then performed to evaluate the short-term performance.

  12. 水泥路面加铺沥青改造质量控制技术%Paving asphalt concrete pavement quality control techniques

    Institute of Scientific and Technical Information of China (English)

    王小兵

    2014-01-01

    总结归纳了旧路面病害检测的内容及方法,从施工管理角度出发,对沥青面层的加铺进行了质量控制,包括沥青、集料、设置试验段等内容,并通过平整度、渗水系数等控制掺量检验,对改造工程质量进行了检查验收。%This paper sums up the old road surface plant disease detection contents and methods, from the angle of construction management of asphalt road surface of the road to quality control, such as asphalt, aggregate, set up test section content, finally, through permeable coefficient control parameter inspection, inspection on project quality acceptance.

  13. Evaluation of asphalt enhanced with locally made nanomaterials

    Directory of Open Access Journals (Sweden)

    HELAL EZZAT

    2016-08-01

    Full Text Available This research work focused on the investigation of the properties of asphalt binder modified with different percentages of nanoclay (NC and nanosilica. The nanosilica was manufactured from two different sources: silica fume (NSF and rice husk (NSH. Results showed that NSF tends to decrease the penetration and increase the softening point temperature (SFT and rotational viscosity (RV. However, NC content more than 3% was found to increase the penetration and decrease both RV and SFT. Using smaller percentages of NC increased both SFT and RV and decreased the penetration. Up to 3% of NSH exhibited improvement in penetration, SFT, and RV, however slight or no improvement was observed at higher contents. The Dynamic Shear Rheometer (DSR results showed obvious improvement in the Superpave performance grade. Both NSF and NC were found to improve Marshall stability of the asphalt mixtures.

  14. Integrated coke, asphalt and jet fuel production process and apparatus

    Science.gov (United States)

    Shang, Jer Y.

    1991-01-01

    A process and apparatus for the production of coke, asphalt and jet fuel m a feed of fossil fuels containing volatile carbon compounds therein is disclosed. The process includes the steps of pyrolyzing the feed in an entrained bed pyrolyzing means, separating the volatile pyrolysis products from the solid pyrolysis products removing at least one coke from the solid pyrolysis products, fractionating the volatile pyrolysis products to produce an overhead stream and a bottom stream which is useful as asphalt for road pavement, condensing the overhead stream to produce a condensed liquid fraction and a noncondensable, gaseous fraction, and removing water from the condensed liquid fraction to produce a jet fuel-containing product. The disclosed apparatus is useful for practicing the foregoing process. the process provides a useful method of mass producing and jet fuels from materials such as coal, oil shale and tar sands.

  15. New method to quantitatively evaluate the homogeneity of asphalt mixtures

    Institute of Scientific and Technical Information of China (English)

    WU Wen-liang; ZHANG Xiao-ning; WANG Duan-yi; LI Zhi

    2009-01-01

    To evaluate the homogeneity of asphalt mixtures, the images of sections obtained by cutting the as-phah mixtures specimen horizontally or vertically were analyzed with digital image processing techniques, and the particle area ratio was achieved by applying sector scan for horizontal specimen and vertical scan for vertical one. The research result indicates that the influence of random distribution of aggregates in cutting the specimen can be eliminated by using colored aggregates to distinguish coarse and fine aggregates and using color threshold to segment the images. Choosing three typical gradations, proving particle area ratio obeying normal distribution and using the variability of particle area ratio as an index, it is feasible to quantitatively evaluate the homogenei-ty of asphalt mixtures.

  16. Investigation of thermal properties of raw materials of asphalt mixtures

    Science.gov (United States)

    Géber, R.; Simon, A.; Kocserha, I.

    2017-02-01

    Asphalt mixtures are composite materials, which are made of different grades of mineral aggregates and bitumen. During the mixing process mineral materials were blended with bitumen at relatively high temperature (∼200 °C). As the binding process come off in these higher temperature range, thermal properties of asphaltic materials are important. The aim of this project is to reveal the thermal properties of raw materials. During our research two types of mineral aggregates were tested (limestone and dolomite) by different methods. Differential thermal analysis, thermal expansion and thermal conductivity were investigated at technologically important temperatures. The results showed that the structure of mineral materials did not change at elevated temperatures, expansion of samples was neglible, while thermal conductivity changed by temperature.

  17. Viscoelastoplastic constitutive model for creep deformation behavior of asphalt sand

    Institute of Scientific and Technical Information of China (English)

    叶永; 杨新华; 陈传尧

    2008-01-01

    A uniaxial viscoelastoplastic model that can describe whole creep behaviors of asphalt sand at different temperatures was presented.The model was composed of three submodels in series,which describe elastoplastic,viscoelastic and viscoplastic characteristics respectively.The constitutive equation was established for uniaxial loading condition,and the creep representation was also obtained.The constitutive parameters were determined by uniaxial compression tests under controlled-stress of 0.1 MPa with five different test temperatures of 20,40,45,50 and 60 ℃.Expressions of the model parameters in terms of temperatures were also given.The model gave prediction at various temperatures consistent with the experimental results,and can reflect the total deformation characterization of asphalt sands.

  18. Evidence of Multi-Stage Hydrocarbon Charging and Biodegradation of the Silurian Asphaltic Sandstones in the Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    刘洛夫

    2002-01-01

    Asphalts distributed widely in the Silurian sandstones of the Tarim Basin include dry asphalt, soft asphalt and heavy oil. These asphaltic sandstones underwent multi-episodic sedimentary and tectonic events, and their occurrence is diverse and complex, being mixed with normal oil usually. So far, very little work has been done on the asphaltic sandstone origin and hydrocarbon charging ages. After detailed study on the Silurian sandstones, the following highlights were obtained from the analytical results: distribution of the mixed asphalt, heavy oil and normal oil in the Silurian sandstones is the result of multi-stage hydrocarbon charging from the Lower Paleozoic marine source rocks; the characters of asphalts formed from oils of different charging ages are of difference; the most important process constraining.the asphaltic sandstone origin is thought to be biodegradation.

  19. Possibilities of preparation asphalt concrete by oil sands of Kazakhstan

    OpenAIRE

    Erbol Tileuberdi; Yerdos Ongarbayev; F. Behrendt; Schneider, I.; Yerzhan Imanbayev; B. Tuleutayev; Yerlan Doszhanov; Zulkhair Mansurov

    2012-01-01

    In the paper physicochemical properties of oil sands of Munayli-Mola deposits and efficient ways to use them for preparing asphalt concrete were represented. For determination of organic part of oil sands the extraction methods were used in Soxhlet apparatus by variety of solvents. It has been established 16 wt.% content of natural bitumen in oil sands, which compared with results of ash content determination. According to results of experiment, the natural bitumen is heavy oil and its charac...

  20. Structural Design of Asphalt Pavement for Low Cost Rural Roads

    Institute of Scientific and Technical Information of China (English)

    Yuan Goulin; Chen Rongshen

    2006-01-01

    On the basis of the equivalent axle load action frequency, the traffic classifications of rural roads as well as their corresponding types are classified. The asphalt pavement structure, road surface types and thickness of the rural roads are suggested for the various action frequency of the equivalent axle load. Furthermore, the roadbase thickness graphs are provided according to different equivalent axle load action frequency with different roadbed modulus and road surface modulus taken into account.

  1. The Research on the Cracks of the Asphalt Pavement

    Directory of Open Access Journals (Sweden)

    OuYangZiqiang

    2015-07-01

    Full Text Available The cracking is one of the common diseases of the asphalt pavement. According to the shape and the forming reasons, the cracks can be divided into two categories. Each categories can be divided into several types. Through the comparison and the analysis of the causes of different cracks, the prevention and the treatments are proposed in the respects of the structural design, material design and construction

  2. Representative volume element of asphalt pavement for electromagnetic measurements

    Directory of Open Access Journals (Sweden)

    Terhi Pellinen

    2015-02-01

    Full Text Available The motivation for this study was to investigate the representative volume element (RVE needed to correlate the nondestructive electromagnetic (EM measurements with the conventional destructive asphalt pavement quality control measurements. A large pavement rehabilitation contract was used as the test site for the experiment. Pavement cores were drilled from the same locations where the stationary and continuous Ground Penetrating Radar (GPR measurements were obtained. Laboratory measurements included testing the bulk density of cores using two methods, the surface-saturated dry method and determining bulk density by dimensions. Also, Vector Network Analyzer (VNA and the through specimen transmission configuration were employed at microwave frequencies to measure the reference dielectric constant of cores using two different footprint areas and therefore volume elements. The RVE for EM measurements turns out to be frequency dependent; therefore in addition to being dependent on asphalt mixture type and method of obtaining bulk density, it is dependent on the resolution of the EM method used. Then, although the average bulk property results agreed with theoretical formulations of higher core air void content giving a lower dielectric constant, for the individual cores there was no correlation for the VNA measurements because the volume element seizes deviated. Similarly, GPR technique was unable to capture the spatial variation of pavement air voids measured from the 150-mm drill cores. More research is needed to determine the usable RVE for asphalt.

  3. Evaluation of Colemanite Waste as Aggregate Hot Mix Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Nihat MOROVA

    2015-09-01

    Full Text Available In this study usability of waste colemanite which is obtained after cutting block colemanite for giving proper shape to blocks as an aggregate in hot mix asphalt. For this aim asphalt concrete samples were prepared with four different aggregate groups and optimum bitumen content was determined. First of all only limestone was used as an aggregate. After that, only colemanite aggregate was used with same aggregate gradation. Then, the next step of the study, Marshall samples were produced by changing coarse and fine aggregate gradation as limestone and colemanite and Marshall test were conducted. When evaluated the results samples which produced with only limestone aggregate gave the maximum Marshall Stability value. When handled other mixture groups (Only colemanite, colemanite as coarse aggregate-limestone as fine aggregate, colemanite as fine aggregate-limestone as coarse aggregate all groups were verified specification limits. As a result, especially in areas where there is widespread colemanite waste, if transportation costs did not exceed the cost of limestone, colemanite stone waste could be used instead of limestone in asphalt concrete mixtures as fine aggregate

  4. Physical and chemical characterization of asphalt (bitumen) paving exposures.

    Science.gov (United States)

    Herrick, Robert F; McClean, Michael D; Meeker, John D; Zwack, Leonard; Hanley, Kevin

    2007-01-01

    The purpose of this research was to characterize the physical and chemical properties of asphalt (bitumen) fume and vapor in hot mix asphalt roadway paving operations. Area and personal air samples were taken using real-time equipment and extractive sampling and analytical methods to determine worker asphalt exposure, as well as to characterize the properties of the particulate and vapor phase components. Analysis of personal inhalation and dermal samples by gas chromatography/mass spectroscopy showed that the polycyclic aromatic hydrocarbon profile is dominated by compounds with molecular weights below 228, and that substituted and heterocyclic polycyclic aromatic hydrocarbons comprised approximately 71% of the detectable mass concentration (vapor and particulate combined). Principal components analysis shows that the polycyclic aromatic hydrocarbons with molecular weights greater than 190 are the driving force behind the polycyclic aromatic compound exposures measured for the dermal and particulate phases; there was no clear trend for the vapor phase Most of the aerosol particles are fine (mass median aerodynamic diameter 1.02 microm; count median diameter 0.24 microm).

  5. Application of a bio-binder as a rejuvenator for wet processed asphalt shingles in pavement construction

    OpenAIRE

    2015-01-01

    This paper investigates the merits of application of bio-binder to enhance rheological properties of asphalt binder in the presence of wet processed recycled asphalt shingles (RAS). It will further examine the performance and workability of asphalt designed with and without a specified percentage of a bio-binder produced from swine manure and RAS. Bio-binder was introduced to liquid asphalt binder modified with four different percentages of RAS; the high and low temperature properties of each...

  6. Evaluation of airborne respirable particulate matter and polycyclic aromatic hydrocarbon exposure of asphalt workers

    Directory of Open Access Journals (Sweden)

    Teresa Cirillo

    2007-12-01

    Full Text Available

    Introduction: Assessment of exposure to the airborne respirable particles (PM10 and polycyclic aromatic hydrocarbons (PAHs of asphalt manufacturing and road paving workers in the Campania region (Italy.

    Materials and Methods: A study was carried out during 2006 and involved 5 firms producing and employing bitumen in road paving activities. The workers studied were categorized on the basis of their job as workers in bitumen manufacturing, in road paving and in workers not exposed at bitumen fume considered like controls.

    Results: In the manufacturing plants the average concentrations of airborne PM10 were 1125±445 ìg/m3 in the HMA manufacturing workers’ areas; 314±81 ìg/m3 in the process surveyors’ cabins and 92±27 ìg/m3 in the controls’ areas (administrative offices. Within the breathing zones of the worker, the average PAHs levels in air were as follows: 367±198 ng/m3 for HMA manufacturing workers; 348±172 ng/m3 for process surveyors; 21±2 ng/m3 for the controls. At the road paving sites the average airborne PM10 levels were 1435±325 ìg/m3 for roller operators; 1610±356 ìg/m3 for paver operators; 319±108 ìg/m for the controls (traffic controllers. PAHs in the breathing zones were 1220±694 ng/m3 for the paver operators; 1360±575 ng/m3 for the roller operators’ and 139±135 ng/m3 for the traffic controllers’. The results show that the more consistent hazard for asphalt workers’ health is derived from exposure to airborne PM10 both in exposed and in non-exposed (controls workers.

  7. Emissions Reductions Associated with the Use of Warm-Mix Asphalt as Compared to Hot-Mix Asphalt

    Science.gov (United States)

    2014-06-01

    processes generating greenhouse gases. The motivation was to meet strict emissions regulations set forth by the Kyoto Protocol (Prowell et al. 2012...estimating emissions during asphalt production, current protocols to measure and control emissions, and case studies where WMA emissions were measured and...Research Program (NCHRP) funded project 9-47a to update the Protocol for Documenting Emissions and Energy Reductions of WMA and Conventional HMA

  8. Thermal behavior of crumb-rubber modified asphalt concrete mixtures

    Science.gov (United States)

    Epps, Amy Louise

    Thermal cracking is one of the primary forms of distress in asphalt concrete pavements, resulting from either a single drop in temperature to an extreme low or from multiple temperature cycles above the fracture temperature of the asphalt-aggregate mixture. The first mode described is low temperature cracking; the second is thermal fatigue. The addition of crumb-rubber, manufactured from scrap tires, to the binder in asphalt concrete pavements has been suggested to minimize both types of thermal cracking. Four experiments were designed and completed to evaluate the thermal behavior of crumb-rubber modified (CRM) asphalt-aggregate mixtures. Modified and unmodified mixture response to thermal stresses was measured in four laboratory tests. The Thermal Stress Restrained Specimen Test (TSRST) and the Indirect Tensile Test (IDT) were used to compare mixture resistance to low temperature cracking. Modified mixtures showed improved performance, and cooling rate did not affect mixture resistance according to the statistical analysis. Therefore results from tests with faster rates can predict performance under slower field rates. In comparison, predicted fracture temperatures and stresses (IDT) were generally higher than measured values (TSRST). In addition, predicted fracture temperatures from binder test results demonstrated that binder testing alone is not sufficient to evaluate CRM mixtures. Thermal fatigue was explored in the third experiment using conventional load-induced fatigue tests with conditions selected to simulate daily temperature fluctuations. Test results indicated that thermal fatigue may contribute to transverse cracking in asphalt pavements. Both unmodified and modified mixtures had a finite capacity to withstand daily temperature fluctuations coupled with cold temperatures. Modified mixtures again exhibited improved performance. The fourth experiment examined fracture properties of modified and unmodified mixtures using a common fracture toughness test

  9. USING OF SBS TYPE POLYMERS AS ADDITIVE IN HOT MIX ASPHALT

    OpenAIRE

    NAMLI, Remzi

    2011-01-01

    Bitumen quality is the one of the major important factor which the achievement of asphalt mixtures. Using pore bitumen results in adequate performance from asphalt mixture. To improve the bitumen properties, additive materials are used. In this study, using of SBS type polymers as additive material in bitumen is researched. It is seen that using SBS effects bitumen positively in many aspects.

  10. Engineering characterisation of epoxidized natural rubber-modified hot-mix asphalt

    Science.gov (United States)

    Al-Mansob, Ramez A.; Ismail, Amiruddin; Yusoff, Nur Izzi Md.; Rahmat, Riza Atiq O. K.; Borhan, Muhamad Nazri; Albrka, Shaban Ismael; Azhari, Che Husna; Karim, Mohamed Rehan

    2017-01-01

    Road distress results in high maintenance costs. However, increased understandings of asphalt behaviour and properties coupled with technological developments have allowed paving technologists to examine the benefits of introducing additives and modifiers. As a result, polymers have become extremely popular as modifiers to improve the performance of the asphalt mix. This study investigates the performance characteristics of epoxidized natural rubber (ENR)-modified hot-mix asphalt. Tests were conducted using ENR–asphalt mixes prepared using the wet process. Mechanical testing on the ENR–asphalt mixes showed that the resilient modulus of the mixes was greatly affected by testing temperature and frequency. On the other hand, although rutting performance decreased at high temperatures because of the increased elasticity of the ENR–asphalt mixes, fatigue performance improved at intermediate temperatures as compared to the base mix. However, durability tests indicated that the ENR–asphalt mixes were slightly susceptible to the presence of moisture. In conclusion, the performance of asphalt pavement can be enhanced by incorporating ENR as a modifier to counter major road distress. PMID:28182724

  11. Monitoring Hot Mix Asphalt Temperature to Improve Homogeneity and Pavement Quality

    NARCIS (Netherlands)

    Huerne, ter H.L.; Doree, A.G.; Miller, S.R.; Santagata, E.

    2009-01-01

    This paper describes how controlled compaction practices lead to better quality asphalt. Therefore, it is important that during compaction operations the mixture is at a suitable temperature in order to achieve the specified degree of compaction. The University of Twente’s Asphalt Paving Research an

  12. Study on triaxial test method and failure criterion of asphalt mixture

    Directory of Open Access Journals (Sweden)

    Jianlong Zheng

    2015-04-01

    Full Text Available Asphalt mixture is the most widely used pavement material all over the world. In China, more than 90% of service expressways are asphalt pavement. However, current asphalt pavement design method still has irrationality. Even though maximum tensile stress theory is used as failure criterion, pavement structure under the effects of wheel load is in three-dimensional complex stress state. Obviously, one-dimensional strength theory cannot reflect the failure characteristics and the resistance of pavement structure. So it is necessary to study the failure criterion of asphalt mixture under three-dimensional complex stress state. Due to limitations of test equipment, there are almost no studies in related area. Under this background, this paper develops a new triaxial test method, according to the investigation of strength characteristics of asphalt mixture under complex stress state through plane isobaric/axial tensile test, plane isobaric/axial compression test, plane tensile and compression/axial tensile test, to reveal the general rules of asphalt mixture's strength failure. The failure mode is divided into three types: tensile failure, shear failure and rheological failure. The tensile meridian and compression meridian in the stress space and strength envelope in the π plane where hydrostatic pressure is greater than zero are obtained, and the failure criterion of asphalt mixture under complex stress state is established, providing theoretical method and scientific basis for structure design as well as strength check of asphalt pavement under three-dimensional stress state.

  13. Reintroducing the intrinsic self-healing properties in reclaimed asphalt by rejuvenation

    NARCIS (Netherlands)

    Qiu, J.; Schlangen, H.E.J.G.; Van de Ven, M.F.C.; Shirazi, M.

    2013-01-01

    Reclaimed Asphalt (RA) is one of the largest fractions of raw materials used in road construction today. Probably over 90% of the total RA in the Netherlands is being reused in new asphalt constructions. RA contains aggregates coated with very hard bitumen (penetration grade of 10-20). During servic

  14. Engineering characterisation of epoxidized natural rubber-modified hot-mix asphalt.

    Science.gov (United States)

    Al-Mansob, Ramez A; Ismail, Amiruddin; Yusoff, Nur Izzi Md; Rahmat, Riza Atiq O K; Borhan, Muhamad Nazri; Albrka, Shaban Ismael; Azhari, Che Husna; Karim, Mohamed Rehan

    2017-01-01

    Road distress results in high maintenance costs. However, increased understandings of asphalt behaviour and properties coupled with technological developments have allowed paving technologists to examine the benefits of introducing additives and modifiers. As a result, polymers have become extremely popular as modifiers to improve the performance of the asphalt mix. This study investigates the performance characteristics of epoxidized natural rubber (ENR)-modified hot-mix asphalt. Tests were conducted using ENR-asphalt mixes prepared using the wet process. Mechanical testing on the ENR-asphalt mixes showed that the resilient modulus of the mixes was greatly affected by testing temperature and frequency. On the other hand, although rutting performance decreased at high temperatures because of the increased elasticity of the ENR-asphalt mixes, fatigue performance improved at intermediate temperatures as compared to the base mix. However, durability tests indicated that the ENR-asphalt mixes were slightly susceptible to the presence of moisture. In conclusion, the performance of asphalt pavement can be enhanced by incorporating ENR as a modifier to counter major road distress.

  15. ENHANCING ASPHALT RHEOLOGICAL BEHAVIOR AND AGING SUSCEPTIBILITY USING BIO-CHAR AND NANO-CLAY

    Directory of Open Access Journals (Sweden)

    Renaldo C. Walters

    2014-01-01

    Full Text Available The life expectancy of Asphalt Binder (AB has been negatively impacted by the harsh bombardment of UV rays. UV rays cause asphalt to oxidize faster, which results in deterioration of asphalt rheological characteristics that can lead to pavement distresses. This study investigates the impact of bio-char and nano-clay of asphalt rheological properties. Two nano scale materials were used for this study were nano-clay and bio-char. Nano-clay (Cloisite 30B is a naturally occurring inorganic mineral. Bio-char is the waste product from bio-binder production. Bio-binder is produced from swine manure using a thermochemical conversion process. This process is then followed by a filtration procedure where the bio-char is produced. Chemical and physical properties of bio-char showed a significant presence of carbon which could in turn enhance asphalt flow properties and reduce the rate of asphalt oxidation. In this study several mixtures are designed and evaluated using Rotational Viscometer testing (RV and X-Ray Diffraction (XRD. Nano-clay is blended at 2 and 4% by weight, with and without bio-binder (5% by weight of dry mass. Bio-char is grinded to nano scale and added to the virgin asphalt binder (PG 64-22 at 2, 5 and 10% by weight. The study results showed that introduction of nano-clay could be effective in reducing temperature susceptibility of asphalt binder.

  16. Damage detection and artificial healing of asphalt concrete after trafficking with a load simulator

    Science.gov (United States)

    Bueno, M.; Arraigada, M.; Partl, M. N.

    2016-08-01

    Artificial healing of asphalt concrete by induction heating requires the addition of electrically conductive and/or magnetic materials into the asphalt mixture. Hence, bitumen can be heated up by an alternating electromagnetic field, decreasing therefore its viscosity and allowing it to flow for closing cracks and recover bonding among the mineral aggregates.

  17. Asphalt Pavement Aging and Temperature Dependent Properties Using Functionally Graded Viscoelastic Model

    Science.gov (United States)

    Dave, Eshan V.

    2009-01-01

    Asphalt concrete pavements are inherently graded viscoelastic structures. Oxidative aging of asphalt binder and temperature cycling due to climatic conditions being the major cause of non-homogeneity. Current pavement analysis and simulation procedures dwell on the use of layered approach to account for these non-homogeneities. The conventional…

  18. Dynamic Mechanical Characterizations and Road Performances of Flame Retardant Asphalt Mortars and Concretes

    Institute of Scientific and Technical Information of China (English)

    QIN Xiantao; ZHU Siyue; LI Zuzhong; CHEN Shuanfa

    2015-01-01

    To research the dynamic mechanical properties and road performances of flame retardant asphalt mortars and mixtures, four different asphalt mortars/mixtures were prepared: a reference group and three asphalt mortars/mixtures containing composite lfame retardant materials (M-FRs) of different proportions. Temperature sweep, frequency sweep, repeated creep test, force ductility test and bending beam rheological test were carried out to research the dynamic mechanical properties of asphalt mortars containing M-FRs; wheel-tracking test, low-temperature bending test and freeze-thaw split test were used to study the road performances of asphalt mixtures containing M-FRs. The results show that high-temperature performances of the three lfame retardant asphalt mortars improve greatly, while low-temperature cracking resistances decline. Both high-temperature performances and water stabilities of asphalt mixtures containing M-FRs are quite good and exceed the speciifcation requirements. However, their low-temperature performances decline in different degrees. In summary, besides their good lfame retardancy, the lfame retardant asphalt mortars and mixtures also exhibit acceptable road performance.

  19. Experimental Investigation of the Matching Relationship between Asphalt Particle and Reservoir Pore in Profile Control Process

    Directory of Open Access Journals (Sweden)

    Chengfeng Ren

    2016-01-01

    Full Text Available Modified sulfonated asphalt particles have a bright application prospect of the profile control of thick reservoirs due to the low cost, extensive sources, and good compatibility with reservoir. Nevertheless, the matching relationship between asphalt particles and reservoir pore has seldom been investigated till now. Oversized particles always block the near-wellbore area, which causes high injection pressures, while undersized particles cannot plug large pores. We designed a core for this experiment which has a high permeability zone in front of it and many pressure measuring points. We could quantitatively assess the matching relationship by measuring the on-way resistance coefficient, residual resistance factor, and relative change of permeability of man-made cores after injecting asphalt. Experimental results indicate that asphalt particles with sizes of 0.02 mm, 0.02–0.06 mm, and 0.08–0.1 mm match with reservoir permeability of 500 mD, 1000 mD, and 2000 mD, respectively. Undersized or oversized particles can reduce the conformance control effect, and the concentration of asphalt particles in the injectant can limit their migration ability. When the concentration of asphalt particles increases to 3000 mg/L, accumulations of asphalt particles can be caused in the formation, in which a scheme with asphalt particles alternative water injection is proposed to avoid the accumulation.

  20. The Study of Water Stability for SBS and Polyacrylate Composite Modified Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    HU Qiusheng

    2014-09-01

    Full Text Available Polyacrylate (Polyacrylate, called PAE is a kind of thermoplastic polymer latex, which is easy to form a waterproof membrane and has greater adhesion ,always be used in concrete to enhance its ability to resist water corrosion.SBS is an inorganic modifier for modified asphalt mixture will help to improve the high and low temperature stability and other road performance, ect.However,its ability to enhanced asphalt mixture’s resistance for water damage is not obvious. In order to research the two composite modified asphalt mixture’s resistance effects to water damage , the Marshall Stability Test and Fort Kentucky Flooding Scattering Experiments were used on asphalt mixtures, SBS modified asphalt mixture and composite modified asphalt mixture and the effect of different composite modified PAE content were studied. The results showed that: PAE can significantly improve the water stability of asphalt mixture, what’s more, with the increase use of PAE,the mass loss rate of asphalt mixture decreases steadily.

  1. Mechanical evaluation of asphalt-aggregate mixtures prepared with fly ash as a filler replacement

    Energy Technology Data Exchange (ETDEWEB)

    Tapkin, T. [Anadolu Univ., Eskisehir (Turkey). Dept. of Civil Engineering

    2008-01-15

    This paper examined methods of introducing fly ash waste products as a filler in asphalt concrete mixtures. A literature review of studies involving fly ash and asphalts was conducted. The effect of fly ash filler replacements on the mechanical properties of asphalt-aggregate mixtures was investigated. A dense bituminous calcareous aggregate was used as a reference mixture for a series of tests. Three types of fly ash were investigated, notably (1) portland cement; (2) lime; and (3) control specimens. Changes in elastic strain, elastic modulus, and permanent strain properties of the asphalt mixtures were determined through a series of fatigue tests. The behaviour of the asphalt concrete pavements were analyzed under applied loads. Results of the tests showed that the fatigue life of the fly ash specimens was higher than the calcareous aggregate specimens. It was concluded that fly ash can used as a filler replacement for dense-graded wearing courses. 35 refs., 17 tabs., 8 figs.

  2. Use of X-ray diffraction in assessing the aging pattern of asphalt fractions

    Energy Technology Data Exchange (ETDEWEB)

    Siddiqui, M.N.; Ali, M.F.; Shirokoff, J. [King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia). Dept. of Chemistry and The Research Institute

    2002-01-01

    The X-ray diffraction (XRD) method was employed to investigate and compare some of the crystallite parameters and aromaticity of asphaltenes obtained from fresh and aged Arabian asphalts, procured from Ras Tanura (RT) and Kuwait (KW) refineries. A new crystallite parameters in the polar aromatics, naphthene aromatics and saturate fractions of these Arabian asphalts were also determined. The results obtained by XRD method for both the types of asphaltenes and other fractions were evaluated and compared. Significant differences were observed between the structure and the aging patterns of fresh and aged asphaltenes of RT and KW asphalt. The results indicate that the source and chemistry of asphalt are responsible for the aging behavior of its components. The rolling thin-film oven and the pressurized aging vessels tests were used to simulate asphalt aging in this research. 21 refs., 5 figs., 4 tabs.

  3. Modeling and Simulation of Flow and Formation Damage of Asphalt-Paved Roads

    Directory of Open Access Journals (Sweden)

    M. H. Alawi

    2013-01-01

    Full Text Available Porous asphalt is a standard asphalt built on aggregate storage bed which allows water to drain through it and reduces stormwater runoff. However, porosity of the porous asphalt and the storage bed may be effectively reduced due to trapping suspended solids from the water or from the asphalt damage. In this paper, we present mathematical modeling and numerical simulation of flow and damage of porous asphalt-paved roads. A mathematical model to describe the fine-particles transport carried by a two-phase flow in a porous medium is presented. The buoyancy, capillarity, and mixed relative permeabilities correlations to fit with the mixed-wet system are considered. Throughout this investigation, we monitor the changing of the fluids properties such as water saturation and solid properties such as porosity and permeability due to trapping the fine-particles.

  4. Experimental evaluation on high temperature rheological properties of various fiber modified asphalt binders

    Institute of Scientific and Technical Information of China (English)

    陈筝; 吴少鹏; 朱祖煌; 刘杰胜

    2008-01-01

    High temperature rheological properties of fiber modified asphalt binders and impact of the type and content on such properties were studied.Three types of fiber,including polyester(PET),polyacrylonitrile(PAN) and cellulose(CEL),a control content(0%) and four levels of fiber content(2%,4%,6% and 8% by total asphalt binder mass) were used with asphalt binders.The high temperature rheological properties,consisting of complex modulus(G*) and phase angle δ,were measured using SHRP’s dynamic shear rheometer(DSR) between 46-82 ℃.Experimental results indicate that the changes of G* and tan δ of fiber modified asphalt binders with the increase of test temperature tend to slow down,and the temperature susceptibility is improved obviously compared to that of original asphalt binder.Fiber modification results in the increase of rutting parameter(G*/sin δ) at high temperatures,the decrease of temperature susceptibility,and further improved high temperature performance of asphalt binder.An excellent correlation exhibits between fiber content and high temperature performance of asphalt binder.Moreover,fiber type also has different influences on the improvement of G*/sin δ,G*/sin δ of PET and PAN fiber asphalt binders are both higher than that of CEL fiber,but G*/sin δ of CEL fiber is still higher than that of original asphalt.However,there is a critical fiber content when fibers start to interact with each other.Therefore,based on the critical fiber content and economic consideration,the optimum fiber contents for various fiber-modified asphalt binders are obtained.

  5. Hanford Permanent Isolation Barrier Program: Asphalt technology data and status report - FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.; Zacher, A.H.

    1994-09-01

    The asphalt layer within the Hanford Permanent Isolation Barrier (HPIB) is an important component of the overall design. This layer provides a RCRA equivalent backup to the overlying earthen layers in the unlikely event that these layers are not able to reduce the infiltration rate to less than 0.05 cm/yr. There is only limited amount of information on using asphalt for a moisture infiltration barrier over the long times required by the HPIB. Therefore, a number of activities are under way, as part of the Barrier Development Program, to obtain data on the performance of asphalt as a moisture barrier in a buried environment over a 1000-year period. These activities include (1) determining RCRA equivalency, (2) measurement of physical properties, (3) measurement of aging characteristics, and (4) relationship to ancient asphalt analogs. During FY 1994 progress was made on all of these activities. Studies were conducted both in the laboratory and on the prototype barrier constructed over the 216-B-57 crib in the 200 East Area on the Hanford Site. This report presents results obtained from the asphalt technology tasks during FY 1994. Also included are updates to planned activities for asphalt analogs and monitoring the asphalt test pad near the prototype barrier. Measurements of hydraulic conductivity on the HMAC portion of the prototype barrier show that the asphalt layers easily meet the RCRA standard of 1 {times} 10{sup -7} cm/s. In-place measurements using a new field falling head technique show an average of 3.66 {times} 10{sup -8} cm/s, while cores taken from the north end of the prototype and measured in a laboratory setup averaged 1.29 {times} 10{sup -9} cm/s. Measurements made on the fluid applied asphalt membrane (polymer-modified asphalt) show an extremely low permeability of less than 1 {times} 10{sup -11} cm/s.

  6. Ecological Effects of Roads on the Plant Diversity of Coastal Wetland in the Yellow River Delta

    Directory of Open Access Journals (Sweden)

    Yunzhao Li

    2014-01-01

    Full Text Available The 26 sample sites in 7 study plots adjacent to asphalt road and earth road in coastal wetland in the Yellow River Delta were selected to quantify plant diversity using quadrat sampling method in plant bloom phase of July and August 2012. The indice of βT and Jaccard’s coefficient were applied to evaluate the species diversity. The results showed that the plant diversities and alien plants were high in the range of 0–20 m to the road verge. There were more exotics and halophytes in plots of asphalt roadside than that of earth roadside. However, proportion of halophytes in habitats of asphalt roadsides was lower than that of earth roadside. By comparing β-diversity, there were more common species in the asphalt roadsides than that in the earth roadsides. The similarity of plant communities in studied plots of asphalt roadsides and earth roadsides increased with increasing the distance to road verge. The effect range of roads for plant diversity in study region was about 20 m to road verge. Our results indicate that the construction and maintenance of roads in wetland could increase the plant species diversities of communities and risk of alien species invasion.

  7. Assessment of porous asphalt pavement performance: hydraulics and water quality

    Science.gov (United States)

    Briggs, J. F.; Ballestero, T. P.; Roseen, R. M.; Houle, J. J.

    2005-05-01

    The objective of this study is to focus on the water quality treatment and hydraulic performance of a porous asphalt pavement parking lot in Durham, New Hampshire. The site was constructed in October 2004 to assess the suitability of porous asphalt pavement for stormwater management in cold climates. The facility consists of a 4-inch asphalt open-graded friction course layer overlying a high porosity sand and gravel base. This base serves as a storage reservoir in-between storms that can slowly infiltrate groundwater. Details on the design, construction, and cost of the facility will be presented. The porous asphalt pavements is qualitatively monitored for signs of distress, especially those due to cold climate stresses like plowing, sanding, salting, and freeze-thaw cycles. Life cycle predictions are discussed. Surface infiltration rates are measured with a constant head device built specifically to test high infiltration capacity pavements. The test measures infiltration rates in a single 4-inch diameter column temporarily sealed to the pavement at its base. A surface inundation test, as described by Bean, is also conducted as a basis for comparison of results (Bean, 2004). These tests assess infiltration rates soon after installation, throughout the winter, during snowmelt, after a winter of salting, sanding, and plowing, and after vacuuming in the spring. Frost penetration into the subsurface reservoir is monitored with a frost gauge. Hydrologic effects of the system are evaluated. Water levels are monitored in the facility and in surrounding wells with continuously logging pressure transducers. The 6-inch underdrain pipe that conveys excess water in the subsurface reservoir to a riprap pad is also continuously monitored for flow. Since porous asphalt pavement systems infiltrate surface water into the subsurface, it is important to assess whether water quality treatment performance in the subsurface reservoir is adequate. The assumed influent water quality is

  8. Test of Microstructur Permeable Asphalt Pavement Used Domato Stone (Quarsite Dolomite As Course Agregate for Surface Layer of Road Pavement

    Directory of Open Access Journals (Sweden)

    Firdaus Chairuddin

    2014-06-01

    Full Text Available The experiment works was dividing into two phases, for phase one was developed to investigate the properties of aggregates and straight asphalt qualities. The experiment work for phase two was developed to design the porous asphalt mix. In this phase Japan’s method and Binamarga’s method was used to define optimum asphalt content. In this phase, has result cantabro loss weight 77.10 for asphalt quality 3% and loss weight 9.70 for asphalt quality 5%. asphalt flow down, air void and density values. The experiment work for phase two was developed to investigate the qualities of porous asphalt. In this phase, wheel tracking machine test was used to investigate the dynamic stability of mixes.

  9. Asphalts and asphaltenes: Macromolecular structure, precipitation properties, and flow in porous media

    Science.gov (United States)

    Rassamdana, Hossein

    Depending on rock and fluid properties, more than 50% of reservoir oil in place is normally produced by enhanced oil recovery (EOR) methods. Among the EOR techniques, miscible flooding is one of the most efficient and widely-used methods. However, this method can suffer from the formation and precipitation of asphalt aggregates. In addition, asphalt deposition is also a major hindrance to heavy oil production, and even primary recovery operations. Asphalt deposition can alter the reservoir rock properties, fluid saturation distribution, fluid flow properties, and eventually the ultimate oil recovery. The shortage of studies on the macromolecular structure and growth mechanisms of asphalt particles is the main reason for the unsuccessful modeling of their precipitation properties. The equivocal behavior of asphalt under some specific conditions could be the other reason. In this research we look at the problem of asphalt formation, flow, and precipitation from three different angles. We analyze extensive small-angle X-ray and neutron scattering data, precipitation data, and molecular weight distribution measurements, and show that they all suggest conclusively that asphalts and asphaltenes are fractal aggregates, and their growth mechanisms are diffusion-limited particle (DLP) and diffusion-limited cluster-cluster (DLCC) aggregation processes. These results lead us to development of a scaling equation of state for predicting asphalt precipitation properties, such as its onset and amount of precipitation. Another result of our study is an analytical equation for modeling the molecular weight distribution of asphalt and asphaltene aggregates. In addition, asphalt phase behavior in miscible and immiscible injections is studied. The effect of the governing thermodynamic factors, such as the pressure, temperature, and composition of the oil and precipitation agents, on the asphalt aggregation and disaggregation processes are investigated. Finally, a model is developed to

  10. Performance testing of asphalt concrete containing crumb rubber modifier and warm mix additives

    Science.gov (United States)

    Ikpugha, Omo John

    Utilisation of scrap tire has been achieved through the production of crumb rubber modified binders and rubberised asphalt concrete. Terminal and field blended asphalt rubbers have been developed through the wet process to incorporate crumb rubber into the asphalt binder. Warm mix asphalt technologies have been developed to curb the problem associated with the processing and production of such crumb rubber modified binders. Also the lowered production and compaction temperatures associated with warm mix additives suggests the possibility of moisture retention in the mix, which can lead to moisture damage. Conventional moisture sensitivity tests have not effectively discriminated good and poor mixes, due to the difficulty of simulating field moisture damage mechanisms. This study was carried out to investigate performance properties of crumb rubber modified asphalt concrete, using commercial warm mix asphalt technology. Commonly utilised asphalt mixtures in North America such as dense graded and stone mastic asphalt were used in this study. Uniaxial Cyclic Compression Testing (UCCT) was used to measure permanent deformation at high temperatures. Indirect Tensile Testing (IDT) was used to investigate low temperature performance. Moisture Induced Sensitivity Testing (MiST) was proposed to be an effective method for detecting the susceptibility of asphalt mixtures to moisture damage, as it incorporates major field stripping mechanisms. Sonnewarm(TM), Sasobit(TM) and Evotherm(TM) additives improved the resistance to permanent deformation of dense graded mixes at a loading rate of 0.5 percent by weight of the binder. Polymer modified mixtures showed superior resistance to permanent deformation compared to asphalt rubber in all mix types. Rediset(TM) WMX improves low temperature properties of dense graded mixes at 0.5 percent loading on the asphalt cement. Rediset LQ and Rediset WMX showed good anti stripping properties at 0.5 percent loading on the asphalt cement. The

  11. Microstructural characterization of the chemomechanical behavior of asphalt in terms of aging and fatigue performance properties

    Science.gov (United States)

    Allen, Robert Grover

    The study of asphalt chemo-mechanics requires a basic understanding of the physical properties and chemical composition of asphalt and how these properties are linked to changes in performance induced by chemical modifications. This work uniquely implements the framework of chemo-mechanics by investigating two types of chemical modification processes, natural (oxidative aging) and synthetic (chemical doping) as they relate not only to macro-scale properties of asphalt binder but also to the asphalt microstructure and nanorheology. Furthermore, this study demonstrates the application of atomic force microscopy (AFM) imaging and the extraction of nano-scale engineering properties, i.e. elastic modulus, relaxation modulus, and surface energy, as a method to predict performance related to the fatigue characteristics of asphalt binders by modeling intrinsic material flaws present amongst phase interfaces. It was revealed that oxidative aging induces substantial microstructural changes in asphalt, including variations in phase structure, phase properties, and phase distribution. It has also been shown that certain asphalt chemical parameters have a consistent and measureable effect on the asphalt microstructure that is observed with AFM. In fact, particular phases that emerged via chemical doping revealed a surprising correlation between oxidative aging and the saturates chemical parameter of asphalt in terms of how they explicitly impact durability and performance of asphalt. By implementing a crack initiation model---which requires measureable microstructural characteristics as an input parameter---it was found that microstructural flaws (depending on the extremity) can have a more profound impact on asphalt performance than the properties of the material located between the flaws. It was also discovered by comparing the findings to performance data in the Strategic Highway Research Program's (SHRP's) Materials Reference Library (MRL), that the crack initiation model

  12. TORBED process reactor technology for asphalt paving recycle

    Energy Technology Data Exchange (ETDEWEB)

    Wellwood, G. A. [Torftech Limited, Reading (United Kingdom); Laughlin, R. G. [Torftech Canada Inc., Mississauga, ON (Canada)

    2001-07-01

    Fundamental principles underlying the TORBED reactor technologies are reviewed. Advantages, limitations, and the experience gained in applying the reactor to a range of material processing needs, particularly reprocessing asphalt paving waste, are discussed. The TORBED reactor consists of a compact shallow packed bed of particles suspended above an annular ring of stationary blades through which a process gas stream is passed at high velocity. Unlike fluidized beds, the process gas mass flow can be set to suit the process, i. e. a smaller gas mass flow can be used at a higher velocity at exit from the blades to keep the bed in proper motion. Advantages are: (1) smaller reactor size with rapid start-up and program change, (2) faster and more precise processing of particles, resulting in a consistent product or process, (3) low process stream pressure losses which facilitate process gas recirculation, (4) ability to process widely graded and irregularly shaped feed stocks, and (5) simplicity of operation through real time control. The 'expanded' version of the TORBED reactor also permits fuel injection to generate process gas temperatures in excess of 1600 degrees C, and allows high gas flow rates with low pressure drop. When used to reprocess asphalt paving waste, the coal tar, used in some 25 per cent of existing roads in the Netherlands, can be easily removed and destroyed and the cleaned stone and the energy generated form the destruction of the coal tar, can be reused in creating new bitumen- containing asphalt paving. Excellent results are reported to have been obtained in pilot studies. Pilot trial also have been conducted on the combustion of wood waste for power generation, with encouraging results. Other pilot projects addressed alternative cementitious materials. 5 refs.

  13. Effect of crumb rubber on asphaltic binder chemistry and rheology

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Cicero de S.; Tome, Luisa G.A.; Sant' ana, Hosiberto B.; Soares, Jorge B.; Soares, Sandra A. [University Federal of Ceara, Fortaleza, CE (Brazil)

    2008-07-01

    The use of the crumb rubber (CR) from scraps tires to modify asphalt binders (AB) at high temperature can improve significantly the performance grade, but the storage stability can be influenced after the mix of AB and CR or polymer. The major concern of asphalt binder with polymer and CR blends is their lack of stability during prolonged storage at high temperatures. The tendency to phase separation under quiescent conditions appears as an important limitation for the practical use of these blends. After the RTFOT and PAV process, the binder conventional and modified was analyzed in a Fourier Transform Infrared spectrometer (FTIR) for chemical characterization. After aging in RTFOT, the AB presented a larger degradation compared to the CR of RABC and RABC commercial. So, the crumb rubber contributed to the binder stability, acting as an antioxidant in the aging process. The dynamic mechanical properties of CR modify asphalts binder before and after graft has been characterized by use of dynamic shear rheometer (DSR) or advances rheology expanded system (ARES) of Rheometric Scientific. The difference in the viscoelastic parameters between the top and the bottom sections of the tube was measured. It has been found that the added content of CR has great effect on the rheological properties of the AB and its high temperature performance. It also has been confirmed that the RABC sample showed larger storage stability compared to the sample RABC commercial observed with viscoelastic parameters. As a consequence, the use CR and aromatic oil can be considered a suitable alternative for modification of binder in pavement. (author)

  14. Recent rubber crumb asphalt pavement projects in Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Soleyman, H.R. [Alberta Univ., Edmonton, AB (Canada). Dept. of Civil and Environmental Engineering; Pulles, B.C.M.; Treleaven, L.B. [EBA Engineering Consultants Ltd., Edmonton, AB (Canada)

    2003-07-01

    Several countries around the world have been using rubber crumb (RC) for pavement applications for more than 20 years. The performance of asphalt pavements is enhanced by the use of recycled tires, which has the added advantage of solving the problem of tire disposal. In 2002, the Tire Recycling Management Association of Alberta (TRMA) and Alberta Transportation (AT) evaluated the feasibility and performance of an overlay using asphalt rubber (AR) pavement in Alberta. A partnership in the project was formed by AT, the City of Calgary, the City of Edmonton, and Strathcona County, where each one paved one section of a road with AR in conjunction with a section using conventional or other asphalt mixture types. The roads selected were: (1) 112 Avenue North West in Calgary, (2) 17 Street and Baseline Road in Strathcona County, (3) 137 Avenue in Edmonton, and (4) highway 630 in the vicinity of North Cooking Lake (Alberta Transportation). Two different AR pavement thicknesses were used to study the effects of overlay thicknesses on the performance of the overlay. The structural and functional factors were monitored before, during and after the construction of all sections. The preliminary evaluation of the application of AR in Alberta was presented, along with a summary of test results and performances of AR pavement sections. A full freeze-thaw cycle is required (Spring 2003) before the results of the analysis of the testing are known. The reduced thickness AR sections performed in a similar manner to those with full thickness AC sections. 10 refs., 5 tabs., 3 figs.

  15. The Use of Polyethylene in Hot Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Mohammad T. Awwad

    2007-01-01

    Full Text Available The increase in road traffic during the last two decades in combination with an insufficient degree of maintenance due to shortage in funds has caused an accelerated and continuous deterioration of the road network in Jordan. To alleviate this process, several types of measures may be effective, e.g., securing funds for maintenance, improved roadway design, use of better quality of materials and the use of more effective construction methods. The use of polymer in asphalt mixture as a modifier started in the 80s of the last century and has been tested in a number of countries around the World. In this research, polyethylene as one sort of polymers is used to investigate the potential prospects to enhance asphalt mixture properties. The objectives also include determining the best type of polyethylene to be used and its proportion. Two types of polyethylene were added to coat the aggregate [High Density Polyethylene (HDPE and Low Density Polyethylene (LDPE]. The polymers were introduced to the mixture in two states (Grinded and not Grinded. Marshall mix design was used, first to determine the optimum bitumen binder content and then further to test the modified mixture properties. In total, 105 samples were prepared (21 samples were used to determine the binder content and the remaining samples were used to investigate the effect of modifying the asphalt mixtures. The optimum asphalt content was 5.4%. Seven proportions of polyethylene of each type and state by weight of the optimum binder content were selected to be tested (6, 8, 10, 12, 14, 16 and 18%. The tests include the determination of bulk density, stability and flow. Marshall mix design requires the determination of the percentages of air voids and air voids of mineral aggregate. The results indicated that grinded HDPE polyethylene modifier provides better engineering properties. The recommended proportion of the modifier is 12% by the weight of bitumen content. It is found to increase the

  16. Influence of Diatomite and Mineral Powder on Thermal Oxidative Ageing Properties of Asphalt

    Directory of Open Access Journals (Sweden)

    Yongchun Cheng

    2015-01-01

    Full Text Available Ageing of asphalt affects the performances of asphalt pavement significantly. Therefore, effects of diatomite and mineral powder on ageing properties of asphalt were investigated systematically in order to improve the antiageing property of mixture. Thin film oven test (TFOT was used to conduct the short term ageing in laboratory. Softening points, penetrations, force ductility, low temperature creep properties, and viscosities of asphalt mastics were tested before and after TFOT, respectively. Results indicated that percent retained penetration (PRP increased with the increasing of fillers. Increment of softening point (ΔT, ductility retention rate (DRR, deformation energy ageing index (JAI, and viscosity ageing index (VAI of asphalt mastics nonlinearly decreased with the increasing of fillers. Ageing of asphalt was reduced by diatomite and mineral powder. And the antiageing effect of diatomite was better than that of mineral powder as a result of its porous structure. It is suggested that the mineral powder could be reasonably replaced by diatomite in order to reduce thermal oxidative ageing of asphalt mixture. The optimal content of diatomite 12.8% is also suggested for engineering.

  17. LABORATORY SIMULATION OF POROUS ASPHALT PARKING LOT SYSTEM AND MIX DESIGN FOR STORM WATER MANAGEMENT

    Directory of Open Access Journals (Sweden)

    M. O. HAMZAH

    2013-04-01

    Full Text Available Porous asphalt pavement was initially developed for the purpose of improving road safety, best candidate material for quiet pavement and to avoid aquaplaning and skidding in wet weather. However, from previous studies, porous asphalt is able to mitigate surface runoff. Porous asphalt parking lots with underlying reservoir course perform as additional temporary water storage matrix that enables reduction of flash flood. This paper elaborates the development of a new porous asphalt aggregate grading design for storm water mitigation using the Nominal Maximum Aggregate Size (NMAS 20 mm. The properties of the mixes were quantified and evaluated in terms of air voids, permeability, abrasion loss and indirect tensile strength. It was found that the proposed gradation has the best permeability and Indirect Tensile Strength (ITS values when compacted at 50 blows per face with a standard Marshal compactor. The porous asphalt slab was prepared using a slab compactor to simulate porous parking lot paving at site. The porous asphalt slab was finally placed inside a locally fabricated water flow simulator to simulate a porous asphalt pavement system for parking lots.

  18. A Study of Moisture Damage in Plastomeric Polymer Modified Asphalt Binder Using Functionalized AFM Tips

    Directory of Open Access Journals (Sweden)

    Rafiqul Tarefder

    2011-12-01

    Full Text Available In this study, moisture damage in plastomeric polymer modified asphalt binder is investigated using Atomic Force Microscopy (AFM with chemically functionalized AFM tips. Four different percentages of plastomeric polymers and two antistripping agents such as Kling Beta and Lime are used to modify a base asphalt binder. Chemical functional groups such as -COOH, -CH3, -NH3, and –OH, that are commonly present in plastomeric polymer modified asphalt system, are used to functionalize the AFM tips. The force distance mode of AFM is used to measure the adhesion forces between a modified asphalt sample surface and the functionalized AFM tips. This enables the measurement of adhesion within an asphalt binder system. It is shown that the adhesion force values in dry sample changed substantially from that in wet conditioned samples. It is evident from this study that plastomeric modification does not help reduce moisture damage in asphalt. The percentage change in adhesion forces due to moisture is about 20 nN for the lime modified samples, and about 50 nN for the Kling Beta modified samples. This indicates that lime is more effective than Kling Beta for reducing moisture damage in plastomeric polymer modified asphalt.

  19. Environmental impacts of asphalt mixes with electric arc furnace steel slag.

    Science.gov (United States)

    Milačič, Radmila; Zuliani, Tea; Oblak, Tina; Mladenovič, Ana; Ančar, Janez Šč

    2011-01-01

    Electric arc furnace (EAF) steel slag can be used as an alternative high-quality material in road construction. Although asphalts with slag aggregates have been recognized as environmentally acceptable, there is a lack of data concerning the potential leaching of toxic Cr(VI) due to the highly alkaline media of EAF slag. Leaching of selected water extractable metals from slag indicated elevated concentrations of total chromium and Cr(VI). To estimate the environmental impacts of asphalt mixes with slag, leachability tests based on diffusion were performed using pure water and salt water as leaching agents. Compact and ground asphalt composites with natural aggregates, and asphalt composites in which the natural aggregates were completely replaced by slag were prepared. The concentrations of total chromium and Cr(VI) were determined in leachates over a time period of 6 mo. After 1 and 6 mo, the concentrations of some other metals were also determined in the leachates. The results indicated that chromium in leachates from asphalt composites with the addition of slag was present almost solely in its hexavalent form. However, the concentrations were very low (below 25 μg L) and did not represent an environmental burden. The leaching of other metals from asphalt composites with the addition of slag was negligible. Therefore, the investigated EAF slag can be considered as environmentally safe substitute for natural aggregates in asphalt mixes.

  20. Size-dependent enrichment of waste slag aggregate fragments abraded from asphalt concrete.

    Science.gov (United States)

    Takahashi, Fumitake; Shimaoka, Takayuki; Gardner, Kevin; Kida, Akiko

    2011-10-30

    Authors consider the environmental prospects of using melted waste slag as the aggregate for asphalt pavement. In particular, the enrichment of slag-derived fragments in fine abrasion dust particles originated from slag asphalt concrete and its size dependency were concerned. A series of surface abrasion tests for asphalt concrete specimens, containing only natural aggregates as reference or 30 wt% of substituted slag aggregates, were performed. Although two of three slag-asphalt concretes generated 1.5-3.0 times larger amount of abrasion dust than the reference asphalt concrete did, it could not be explained only by abrasion resistance of slag. The enrichment of slag-derived fragments in abrasion dust, estimated on the basis of the peak intensity of quartz and heavy metal concentrations, had size dependency for all slag-asphalt concretes. Slag-derived fragments were enriched in abrasion dust particles with diameters of 150-1000 μm. Enrichment factors were 1.4-2.1. In contrast, there was no enrichment in abrasion dust particles with diameter less than 75 μm. This suggests that prior airborne-size fragmentation of substituted slag aggregates does not need to be considered for tested slag aggregates when environmental risks of abrasion dust of slag-asphalt pavement are assessed.

  1. Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China.

    Science.gov (United States)

    Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

    2016-03-22

    In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase.

  2. The Potential of Heat Collection from Solar Radiation in Asphalt Solar Collectors in Malaysia

    Science.gov (United States)

    Beddu, Salmia; Talib, Siti Hidayah Abdul; Itam, Zarina

    2016-03-01

    The implementation of asphalt solar collectors as a means of an energy source is being widely studied in recent years. Asphalt pavements are exposed to daily solar radiation, and are capable of reaching up to 70°C in temperature. The potential of harvesting energy from solar pavements as an alternative energy source in replace of non-renewable energy sources prone to depletion such as fuel is promising. In Malaysia, the sun intensity is quite high and for this reason, absorbing the heat from sun radiation, and then utilizing it in many other applications such as generating electricity could definitely be impressive. Previous researches on the different methods of studying the effect of heat absorption caused by solar radiation prove to be quite old and inaffective. More recent findings, on the otherhand, prove to be more informative. This paper focuses on determining the potential of heat collection from solar radiation in asphalt solar collectors using steel piping. The asphalt solar collector model constructed for this research was prepared in the civil engineering laboratory. The hot mixed asphalt (HMA) contains 10% bitumen mixed with 90% aggregates of the total size of asphalt. Three stainless steel pipes were embedded into the interior region of the model according to the design criteria, and then put to test. Results show that harvesting energy from asphalt solar collectors proves highly potential in Malaysia due its the hot climate.

  3. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review

    Directory of Open Access Journals (Sweden)

    Haiping Zhou

    2014-02-01

    Full Text Available The California Department of Transportation (Caltrans has been using scrap tire rubber in asphalt pavements since the 1970s in chip seals and the 1980s in rubberized hot mix asphalt(RHMA. Both the wet (field blend and dry processes were used in early trials. Caltrans has also used rubber modified binders containing both crumb rubber modifier and polymer modifier that could be manufactured at a refinery facility, a terminal blend wet process. Since the beginning of this century, Caltrans increased the use of scrap tire rubber in paving projects and invested considerable resources in developing technically sound, cost effective, and environmentally friendly strategies for using scrap tire rubber in roadway applications. By the end of year 2010, approximately 31%of all hot mix asphalt (HMA placed by Caltrans was rubberized HMA, roughly 1.2 million tons. Caltrans efforts in using asphalt rubber products were also demonstrated in its research and technology development. These included the construction of two full-scale field experiments, five warranty projects, and an accelerated pavement study using a heavy vehicle simulator. Additionally, terminal blend asphalt rubber and rubberized warm mix asphalts began to be experimented on trial basis. This paper provides a comprehensive review of Caltrans experience over four decades with asphalt rubber products. Current practices and future outlook are also discussed.

  4. Modification of local asphalt with epoxy resin to be used in pavement

    Directory of Open Access Journals (Sweden)

    A.M.M. Abd El Rahman

    2012-12-01

    Full Text Available The durability of asphalt pavement is greatly influenced by the environmental changes during the year. In this paper, we prepared asphalt modified by mixing asphalt 60/70 with epoxidized natural rubber (ENR in different percentages (5, 10 and 15%, which was achieved using preformed peracetic acid (aqueous solution 59% at 60–80 °C, then molten cross-linker maleic anhydride (MA was added to modified asphalt until homogenous blends are achieved. Marshall test was used to evaluate the asphalt pavement performance depending on the curing time and hardener concentration. To measure marshall test, the pervious mixture was stirred with aggregate jop formula mix (JMF and 40% MA at 150–170 °C for 20 h and 1600 rpm. From the obtained data, it was found that asphalt mixed with 15% of ENR + 40% MA achieves a high stability (16,632 Newton, air voids of 2.5%, flow of 2.9 mm and mineral voids of 14.6%. While, the stability of the unmodified asphalt was (11,500 Newton, the flow 3.2 mm, the suitable air void value was 3.7% at 5.5% with the same conditions.

  5. Rutting and Fatigue Cracking Resistance of Waste Cooking Oil Modified Trinidad Asphaltic Materials

    Directory of Open Access Journals (Sweden)

    Rean Maharaj

    2015-01-01

    Full Text Available The influence of waste cooking oil (WCO on the performance characteristics of asphaltic materials indigenous to Trinidad, namely, Trinidad Lake Asphalt (TLA, Trinidad Petroleum Bitumen (TPB, and TLA : TPB (50 : 50 blend, was investigated to deduce the applicability of the WCO as a performance enhancer for the base asphalt. The rheological properties of complex modulus (G∗ and phase angle (δ were measured for modified base asphalt blends containing up to 10% WCO. The results of rheology studies demonstrated that the incremental addition of WCO to the three parent binders resulted in incremental decreases in the rutting resistance (decrease in G∗/sinδ values and increases in the fatigue cracking resistance (decrease in G∗sinδ value. The fatigue cracking resistance and rutting resistance for the TLA : TPB (50 : 50 blends were between those of the blends containing pure TLA and TPB. As operating temperature increased, an increase in the resistance to fatigue cracking and a decrease in the rutting resistance were observed for all of the WCO modified asphaltic blends. This study demonstrated the capability to create customized asphalt-WCO blends to suit special applications and highlights the potential for WCO to be used as an environmentally attractive option for improving the use of Trinidad asphaltic materials.

  6. Research on nonlinear constitutive relationship of permanent deformation in asphalt pavements

    Institute of Scientific and Technical Information of China (English)

    PENG; Miaojuan; XU; Zhihong

    2006-01-01

    To predict correctly the rut depths in asphalt pavements,a new nonlinear viscoelastic-elastoplastic constitutive model of permanent deformation in asphalt pavements is presented.The model combines a generalized Maxwell model with an elastoplastic one.Then from the creep theory,the linear and nonlinear constitutive equations of the generalized Maxwell model are obtained.From the nonlinear finite element method for the rutting of the asphalt pavement,the rut depths of 4 asphalt-aggregate mixtures are obtained.And the results are compared with the ones from the finite element method by SHRP and the experiments by SWK/UN.The results in this paper are better than the ones by SHRP,and agree with the ones of the experiment by SWK/UN.This shows that the nonlinear viscoelastic-elastoplastic constitutive model,which is presented in this paper for the rutting of the asphalt pavement,is effective.The properties,such as nonlinear elasticity,plasticity,viscoelasticity and nonlinear viscoelasticity,which affect the rutting of an asphalt pavement,can be shown in the model.And the characteristics of the permanent deformation of the asphalt pavement can be presented entirely in the model.

  7. Quantitative cancer risk assessment for occupational exposures to asphalt fumes during built-up roofing asphalt (BURA) operations.

    Science.gov (United States)

    Rhomberg, Lorenz R; Mayfield, David B; Goodman, Julie E; Butler, Eric L; Nascarella, Marc A; Williams, Daniel R

    2015-01-01

    The International Agency for Research on Cancer qualitatively characterized occupational exposure to oxidized bitumen emissions during roofing as probably carcinogenic to humans (Group 2A). We examine chemistry, exposure, epidemiology and animal toxicity data to explore quantitative risks for roofing workers applying built-up roofing asphalt (BURA). Epidemiology studies do not consistently report elevated risks, and generally do not have sufficient exposure information or adequately control for confounders, precluding their use for dose-response analysis. Dermal carcinogenicity bioassays using mice report increased tumor incidence with single high doses. In order to quantify potential cancer risks, we develop time-to-tumor model methods [consistent with U.S. Environmental Protection Agency (EPA) dose-response analysis and mixtures guidelines] using the dose-time-response shape of concurrent exposures to benzo[a]pyrene (B[a]P) as concurrent controls (which had several exposure levels) to infer presumed parallel dose-time-response curves for BURA-fume condensate. We compare EPA relative potency factor approaches, based on observed relative potency of BURA to B[a]P in similar experiments, and direct observation of the inferred BURA dose-time-response (scaled to humans) as means for characterizing a dermal unit risk factor. We apply similar approaches to limited data on asphalt-fume inhalation and respiratory cancers in rats. We also develop a method for adjusting potency estimates for asphalts that vary in composition using measured fluorescence. Overall, the various methods indicate that cancer risks to roofers from both dermal and inhalation exposure to BURA are within a range typically deemed acceptable within regulatory frameworks. The approaches developed may be useful in assessing carcinogenic potency of other complex mixtures of polycyclic aromatic compounds.

  8. A review of changes in composition of hot mix asphalt in the United States.

    Science.gov (United States)

    Mundt, Diane J; Marano, Kristin M; Nunes, Anthony P; Adams, Robert C

    2009-11-01

    This review researched the materials, methods, and practices in the hot mix asphalt industry that might impact future exposure assessments and epidemiologic research on road paving workers. Since World War II, the U.S. interstate highway system, increased traffic volume, transportation speeds, and vehicle axle loads have necessitated an increase in demand for hot mix asphalt for road construction and maintenance, while requiring a consistent road paving product that meets state-specific physical performance specifications. We reviewed typical practices in hot mix asphalt paving in the United States to understand the extent to which materials are and have been added to hot mix asphalt to meet specifications and how changes in practices and technology could affect evaluation of worker exposures for future research. Historical documents were reviewed, and industry experts from 16 states were interviewed to obtain relevant information on industry practices. Participants from all states reported additive use, with most being less than 2% by weight. Crumb rubber and recycled asphalt pavement were added in concentrations approximately 10% per unit weight of the mix. The most frequently added materials included polymers and anti-stripping agents. Crumb rubber, sulfur, asbestos, roofing shingles, slag, or fly ash have been used in limited amounts for short periods of time or in limited geographic areas. No state reported using coal tar as an additive to hot mix asphalt or as a binder alternative in hot mix pavements for high-volume road construction. Coal tar may be present in recycled asphalt pavement from historical use, which would need to be considered in future exposure assessments of pavers. Changes in hot mix asphalt production and laydown emission control equipment have been universally implemented over time as the technology has become available to reduce potential worker exposures. This work is a companion review to a study undertaken in the petroleum refining

  9. Distribution characteristics and petroleum geological significance of the Silurian asphaltic sandstones in Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Jun; PANG; Xiongqi; LIU; Luofu; JIANG; Zhenxue; LIU

    2004-01-01

    The Tarim Basin is a typical superimposed basin in which there have occurred multiphase adjustment and destruction of the reservoirs. The widely distributed asphaltic sandstones of the Silurian are the very product after destruction of the reservoirs. Studies show that the Silurian asphaltic sandstones distributed in both the middle and western parts on the basin are controlled chiefly by the Caledonian oil source area and by the Tazhong, Tabei and Bachu uplifts, whereas the distribution of the asphaltic sandstones on local structural belts is controlled by the reservoir's sedimentary system. Vertically, most of the asphaltic sandstones are under the regional caprock of red mudstones and the upper sandstone section of compact lithology. Due to the difference of hydrocarbon destruction in the early stage and the influence of hydrocarbon recharge in the late stage, the asphaltic sandstones and oil-bearing sandstones in the Tazhong area can be vertically divided into the upper and lower sections and they have an interactive distribution relationship as well. Asphaltic sandstones exist not only in intergranular pores but also inside the grains of sand and between the crevices, proving the destruction of early reservoirs due to uplifting. The existence of asphaltic sandstones over a large area reveals that the large-scale migration and accumulation and the subsequent destruction of hydrocarbons in the Craton area. The destruction caused a loss of the reserve resources of the Palaeozoic amounting to nearly 13.3 billion tons. Asphaltic sandstones formed after the destruction of oil and gas may serve as an effective caprock which is beneficial to accumulation of hydrocarbons and formation of the pool sealed by asphaltic sandstones in the later stage. The destruction of the early Silurian hydrocarbons depends on the stratigraphic burial depth. The deep part under the northern slope of Tazhong is an area favorable to search of undestroyed Silurian oil reservoirs.

  10. Rheological evaluation of polymer-modified asphalt binders

    Directory of Open Access Journals (Sweden)

    Mônica Romero Santos Fernandes

    2008-09-01

    Full Text Available Currently, the most used polymer for asphalt binder modification is the thermoplastic elastomer styrene butadiene styrene (SBS and aromatic oil is commonly added to the mixtures to improve their compatibly. This paper proposes the use of oil shale from sedimentary rock as a compatibilizer agent for polymer-modified asphalt binder (PMB. PMBs were produced by mixing a bitumen with a linear SBS copolymer (3.5% (w.w-1 using two oil shale contents (2 and 4% and petroleum aromatic oil to evaluate comparatively the effect of the compatibilizer agent on the SBS PMB properties. The rheological characteristics of the SBS PMBs were analyzed in a dynamic shear rheometer (DSR and the morphology accessed by fluorescence optical microscopy. The viscoelastic behavior of the samples corroborated the results for the classical properties and varied according to the sample morphology and composition. The results indicate that the aromatic and shale oils have similar effects on the microstructure, storage stability and viscoelastic behavior of the PMBs. Thus, shale oil could be successfully used as a compatibilizer agent without loss of properties or could even replace the aromatic oil. Following the Superpave methodology it was observed that the linear- and radial-SBS PMBs and linear-SBS PMB with 2% of shale oil can be used up to 70 °C, and the linear-SBS PMBs with 4% of shale oil or 2% of aromatic oil can be used only up to 64 °C.

  11. Evaluation and application of surfactants synthesized from asphalt components

    Directory of Open Access Journals (Sweden)

    E.R. Souaya

    2012-06-01

    Full Text Available The synthesis, characterization, surface activity and applications of nonionic surfactants derived from the asphalt components (maltenes M are presented. These compounds were synthesized by the sulfonation of (maltene, then the prepared maltene sulfonic acid (MS was reacted with hexadecylamine giving maltene sulfonamide product (A which undergoes an alkali-catalyzed ethoxylation at (135–150 °C. Several surfactants (M-10 to M-40 were formed with different ethylene oxide units (from 10 up to 40 and were characterized by molecular weight determinations, elemental analyses and FTIR analysis. Surface tension, as a function of concentration of the surfactants in the aqueous media, was measured at 25 °C. From these measurements, the critical micelle concentration (CMC, the maximum surface excess concentration (Гmax, Minimum area per molecule (Amin, effectiveness of surface reduction (ПCMC and the efficiency (pC20 were calculated. The prepared surfactants were applied as emulsifying agents for making asphalt emulsions. Storage stability, (Saybolt Furol viscosity, settlement (water content difference %, coating ability and water resistance were measured. The results indicated that M-20 (maltene sulfonamide ethoxylated with 20 units of ethylene oxides gives a maximum stability.

  12. Numerical Analysis of Asphalt Pavements under Moving Wheel Loads

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The responses of the pavement in service are the basis for the design of the semi-rigid base course asphalt pavement.Due to the dynamic characteristics of wheel loads and the temperature loads,the dynamic response analysis is very significant.In this article, the dynamic analysis of asphalt pavement under moving wheel loads is carried out using finite element method coupled with non-reflective boundary method.The influences of the base modulus, thickness, the vehicle velocity, the tire pressure, and the contact condition at the interface are studied using parametric analysis.The results of numerical analysis show that it is not appropriate to simply increase the base modulus or thickness in the design.It would be beneficial if the base design is optimized synthetically.The increase of damping is also beneficial to the pavements because of the surface deflection and the stresses declination.Furthermore, the good contact condition at the interface results in good performance because it combines every layer of the pavement to work together.As overload aggravates the working condition of the pavement, it is not allowed.

  13. Survival Analysis of Fatigue and Rutting Failures in Asphalt Pavements

    Directory of Open Access Journals (Sweden)

    Pabitra Rajbongshi

    2016-01-01

    Full Text Available Fatigue and rutting are two primary failure mechanisms in asphalt pavements. The evaluations of fatigue and rutting performances are significantly uncertain due to large uncertainties involved with the traffic and pavement life parameters. Therefore, deterministically it is inadequate to predict when an in-service pavement would fail. Thus, the deterministic failure time which is known as design life (yr of pavement becomes random in nature. Reliability analysis of such time (t dependent random variable is the survival analysis of the structure. This paper presents the survival analysis of fatigue and rutting failures in asphalt pavement structures. It is observed that the survival of pavements with time can be obtained using the bathtub concept that contains a constant failure rate period and an increasing failure rate period. The survival function (S(t, probability density function (pdf, and probability distribution function (PDF of failure time parameter are derived using bathtub analysis. It is seen that the distribution of failure time follows three parametric Weibull distributions. This paper also works out to find the most reliable life (YrR of pavement sections corresponding to any reliability level of survivability.

  14. Choosing mineral carrier of nanoscale additives for asphalt concrete

    Directory of Open Access Journals (Sweden)

    Inozemtsev Sergey Sergeevich

    2014-03-01

    Full Text Available At present time the operation life of the majority of roads is essentially shorter than required. The reason for it is the increase in traffic intensity and axle loads of automobile transport. The obvious reasons for early wear of roads are the low quality of the components used and low industrial standards while producing asphalt pavement. In this paper the mineral material was selected as a carrier of nanoscale additives for asphalt. The optimal modes for grinding mineral materials were identified, which provide correspondence of their structure parameters with the developed model. The influence of different mineral nanomodifier carriers on the structure formation processes was estimated. It is shown that among a number of mineral materials diatomite has high activity in relation to the bitumen, because it has a highly porous structure. It is also shown that as a result of lighter fractions of bitumen adsorption on the border of phase interface, diatomite and bitumen changes from the free state to the film, and solvate shell of bitumen is saturated with asphaltenes. With the help of IR spectroscopy the authors defined the nature of the diatomite and bitumen interaction and proved that in the process of their interaction there occurs physical adsorption with additional absorption of bitumen components into the pore space of diatomite grains.

  15. Sulfur extended asphalt pavement evaluation in the State of Washington: SR 270 highway pavement performance report

    Science.gov (United States)

    Mahoney, J. P.; Terrel, R. L.; Cook, J. C.

    1982-11-01

    The placement and performance of sulfur extended asphalt (SEA) paving mixtures at a highway test site (SR 270) near Pullman, Washington is summarized. The mixture and structural designs and construction details are included. This is followed by a discussion of the data collection and analysis accomplished over a three year evaluation period (1979-1982). A major experimental feature of the study was the use of 0.100 (conventional asphalt concrete), 30/70 and 40/60 SEA binder ratios (sulfur/asphalt ratios are expressed as weight percents in the experimental paving mixtures.

  16. Evaluation of Warm-Mix Asphalt Technologies for Use on Airfield Pavements

    Science.gov (United States)

    2013-12-01

    Auburn, AL: National Center for Asphalt Technology. Cooley Jr., L. A. 2003. Evaluation of Pavement Permeability in Mississippi. Auburn, AL: National...ER D C/ G SL T R -1 2 -3 Evaluation of Warm-Mix Asphalt Technologies for Use on Airfield Pavements G eo te ch n ic al a n d S tr u ct...default. ERDC/GSL TR-12-3 February 2012 (Revised December 2013) Evaluation of Warm-Mix Asphalt Technologies for Use on Airfield Pavements

  17. Characteristics and applications of high-performance fiber reinforced asphalt concrete

    Science.gov (United States)

    Park, Philip

    Steel fiber reinforced asphalt concrete (SFRAC) is suggested in this research as a multifunctional high performance material that can potentially lead to a breakthrough in developing a sustainable transportation system. The innovative use of steel fibers in asphalt concrete is expected to improve mechanical performance and electrical conductivity of asphalt concrete that is used for paving 94% of U. S. roadways. In an effort to understand the fiber reinforcing mechanisms in SFRAC, the interaction between a single straight steel fiber and the surrounding asphalt matrix is investigated through single fiber pull-out tests and detailed numerical simulations. It is shown that pull-out failure modes can be classified into three types: matrix, interface, and mixed failure modes and that there is a critical shear stress, independent of temperature and loading rate, beyond which interfacial debonding will occur. The reinforcing effects of SFRAC with various fiber sizes and shapes are investigated through indirect tension tests at low temperature. Compared to unreinforced specimens, fiber reinforced specimens exhibit up to 62.5% increase in indirect tensile strength and 895% improvements in toughness. The documented improvements are the highest attributed to fiber reinforcement in asphalt concrete to date. The use of steel fibers and other conductive additives provides an opportunity to make asphalt pavement electrically conductive, which opens up the possibility for multifunctional applications. Various asphalt mixtures and mastics are tested and the results indicate that the electrical resistivity of asphaltic materials can be manipulated over a wide range by replacing a part of traditional fillers with a specific type of graphite powder. Another important achievement of this study is development and validation of a three dimensional nonlinear viscoelastic constitutive model that is capable of simulating both linear and nonlinear viscoelasticity of asphaltic materials. The

  18. Validation Tests of a Non-Nuclear Combined Asphalt and Soil Density Gauge

    Science.gov (United States)

    2014-04-01

    ER D C/ G SL T R- 14 -1 0 Validation Tests of a Non-Nuclear Combined Asphalt and Soil Density Gauge G eo te ch ni ca l a nd S tr uc tu...Validation Tests of a Non-Nuclear Combined Asphalt and Soil Density Gauge Ernest S. Berney IV and Mariely Mejías-Santiago, Geotechnical and Structures...Engineer Research and Development Center in Vicksburg, MS validated the effectiveness of the Soil Density Gauge (SDG) and the Combined Asphalt Soil

  19. Epoxy asphalt concrete paving on the deck of long-span steel bridges

    Institute of Scientific and Technical Information of China (English)

    HUANG Wei; QIAN Zhendong; CHEN Gang; YANG Jun

    2003-01-01

    It is the first systematic research in the world on the composition design of epoxy asphalt concrete as pav- ing material. Material characteristics and service perform- ance of mixture, fatigue resistance characteristics of epoxy asphalt concrete by the fatigue test of complex beam have also been described. This research indicates that epoxy asphalt concrete is a good type of paving material. Research results have been applied successfully in the paving of steel deck of the Second Nanjing Yangtze River Bridge (SNYRB). It provides a new paving type for long-span steel bridges of China and has a bright application prospect.

  20. HOW TO OBTAIN ECONOMICALLY EFFICIENT ASPHALT CONCRETE MIXTURES FOR CONSTRUCTIVE AUTOMOBILE ROAD AND STREET PAVEMENTS

    Directory of Open Access Journals (Sweden)

    V. A. Verenko

    2009-01-01

    Full Text Available The paper describes a methodology for evaluation of technical and economic efficiency of asphalt concrete mixture components. The method allows to perform a directed search for new materials which are used for mixture preparation and it also provides an efficient use of monetary funds. Firstly, it is possible to obtain this result due to optimum price-quality ratio of asphalt mixture which is determined by its service life in a pavement; secondly, it is possible to obtain this result due to  exclusion of errors while selecting components of the asphalt mixture out of the whole range applied presently in the world practice.

  1. Asphalt Volcanism and Chemosynthetic Life in the Campeche Knolls, Gulf of Mexico

    Science.gov (United States)

    MacDonald, I. R.; Bohrmann, G.; Escobar, E.; Abegg, F.; Blanchon, P.; Blinova, V.; Brückmann, W.; Drews, M.; Eisenhauer, A.; Han, X.; Heeschen, K.; Meier, F.; Mortera, C.; Naehr, T.; Orcutt, B.; Bernard, B.; Brooks, J.; de Faragó, M.

    2004-05-01

    In the Campeche Knolls, in the southern Gulf of Mexico, lava-like flows of solidified asphalt cover more than 1 square kilometer of the rim of a dissected salt dome at a depth of 3000 meters below sea level. Chemosynthetic tubeworms and bivalves colonize the sea floor near the asphalt, which chilled and contracted after discharge. The site also includes oil seeps, gas hydrate deposits, locally anoxic sediments, and slabs of authigenic carbonate. Asphalt volcanism creates a habitat for chemosynthetic life that may be widespread at great depth in the Gulf of Mexico.

  2. Development of an asphalt aging procedure to assess long-term binder performance

    KAUST Repository

    Juristyarini, Pramitha

    2011-09-07

    Nine asphalts, including seven Strategic Highway Research Program asphalts and two Texas asphalts, were aged at several conditions of temperature and oxygen pressure to develop an aging test. Values for a dynamic shear rheometer function, a combination of both elastic and viscous properties that serves as an indicator of susceptibility to age-related pavement cracking, were measured for both aged and unaged samples. Each aging condition was ranked and calibrated against environmental room aging (60°C, 1 atm air), used to simulate road aging. PAV thin-film aging at 90°C, 20 atm air for 32 hr best represented environmental room aging. © Taylor & Francis Group, LLC.

  3. Building Asphalt Pavement with SBS-based Compound Added Using a Dry Process in Greenland

    DEFF Research Database (Denmark)

    Lee, Hosin; Kim, Yongjoo; Geisler, Nivi

    2009-01-01

    heavy traffic and severe weather conditions in Greenland. Based on the initial set of strain data collected under the slow-moving loader right after construction, the highest strain value was observed from the test section with the highest amount of SBS-based compound. The increased amount of SBS......-based compound seemed to affect the asphalt mix to become more flexible under the heavy loads. By adding SBS-based compound to asphalt mixtures using a “dry” process, it is expected that the pavement would become more resistant to rutting than a typical asphalt mixture used in Greenland while enduring its arctic...... weather....

  4. Asphalt fume dermal carcinogenicity potential: II. Initiation-promotion assay of Type III built-up roofing asphalt.

    Science.gov (United States)

    Freeman, James J; Schreiner, Ceinwen A; Beazley, S; Burnett, Donald M; Clark, Charles R; Mahagaokar, Suneeta; Parker, Craig M; Stewart, Christopher W; Swanson, Mark S; Arp, Earl W

    2011-10-01

    Clark et al. (accepted for publication) reported that a sample of field-matched fume condensate from a Type III built-up roofing asphalt (BURA) resulted in a carcinogenic response in a mouse skin bioassay, with relatively few tumor-bearing animals, long tumor latency and chronic skin irritation. This mouse skin initiation/promotion study was conducted to assess possible mechanisms, i.e., genotoxic initiation vs. tumor promotion subsequent to repeated skin injury and repair. The same Type III BURA fume condensate sample was evaluated in groups of 30 male Crl:CD1® mice by skin application twice per week (total dose of 50 mg/week) for 2 weeks during the initiation phase and for 26 weeks during the promotion phase. Positive control substances were 7,12-dimethylbenz(a)anthracene (DMBA, 50 μg applied once) as an initiator and 12-O-tetradecanoyl-13-acetate (TPA, 5 μg, applied twice weekly) during the promotion phase. During the 6 months of study with the asphalt fume condensate, eight skin masses were observed when tested for initiation, five of which were confirmed microscopically to be benign squamous cell papillomas. Only two papillomas were observed when tested for promotion. There was no apparent relationship between skin irritation and tumor development in this study. These results are more indicative of genotoxicity rather than a non-genotoxic mode of action.

  5. Determination of the biodegradation rate of asphalt for the Hanford grout vaults. Hanford Grout Technology Program

    Energy Technology Data Exchange (ETDEWEB)

    Luey, J.; Li, S.W.

    1993-04-01

    Testing was initiated in March 1991 and completed in November 1992 to determine the rate at which asphalt is biodegraded by microorganisms native to the Hanford Site soils. The asphalt tested (AR-6000, US Oil, Tacoma, Washington) is to be used in the construction of a diffusion barrier for the Hanford grout vaults. Experiments to determine asphalt biodegradation rates were conducted using three separate test sets. These test sets were initiated in March 1991, January 1992, and June 1992 and ran for periods of 6 months, 11 months, and 6 months, respectively. The experimental method used was one originally developed by Bartha and Pramer (1965), and further refined by Bowerman et al. (1985), that determined the asphalt biodegradation rate through the measurement of carbon dioxide evolved.

  6. A Review on Using Crumb Rubber in Reinforcement of Asphalt Pavement

    Directory of Open Access Journals (Sweden)

    Nuha Salim Mashaan

    2014-01-01

    Full Text Available An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste materials, and it is believed that crumb rubber modifier (CRM could be an alternative polymer material in improving hot mix asphalt performance properties. In this paper, a critical review on the use of crumb rubber in reinforcement of asphalt pavement will be presented and discussed. It will also include a review on the effects of CRM on the stiffness, rutting, and fatigue resistance of road pavement construction.

  7. Rendering the loss of strength in dry concretes with addition of milled asphalt through microscopic analysis

    Directory of Open Access Journals (Sweden)

    T. Sachet

    Full Text Available Milled asphalt removed from old pavement carpets requires tenable handling easily reachable through its incorporation within other paving materials. This work deals with the effects of such incorporation to dry compacted concretes. Fine, intermediate, coarse and whole portions of milled asphalts were blended to a reference concrete. Mechanical tests disclosed remarkable losses on its strengths and modulus of elasticity; for the stereoscope and scanning microscopy pointed out impaired transition zones between the cement paste and the milled aggregates involved by thin asphalt films. Nevertheless, the mechanical results shown that the concretes with incorporated milled asphalt aggregates are suitable for use in pavement layers as bases and sub-bases even with reduced mechanical parameters.

  8. Rheological Properties of Asphalt Modified by Supramolecular UV Resistant Material-LDHs

    Institute of Scientific and Technical Information of China (English)

    WANG Jinshan; WU Shaopeng; HAN Jun; LIU Xing

    2012-01-01

    Dynamic rheological properties of asphalt modified by Supramolecular UV resistant material-layered double hydroxides(LDHs) was studied by means of the dynamic shear rheometer (DSR) test.Two typical base asphalts were chosen and modified by 2 different LDHs contents.DSR tests were performed on the original samples,samples after exposed to outdoor and samples after the artificial accelerated UV aging tests respectively to analyze the rheological properties.It is found that when the LDHs content is between 3wt% and 5wt% of asphalt weight,the high temperature performance and fatigue resistant property of the modified asphalt become better,the UV aging resistance properties are improved.

  9. Effects of Fiber Finish on the Performance of Asphalt Binders and Mastics

    Directory of Open Access Journals (Sweden)

    Bradley J. Putman

    2011-01-01

    Full Text Available The objective of this study was to determine the effects of finishes applied to polyester fibers on the properties of asphalt binders and mastics. Asphalt binders were mixed with finishes that were extracted from the fibers, and mastics were also made with binder and fibers (with and without finish to isolate the effects of the finish. The results indicated that crude source plays a significant role in how the fiber finish affects the binders and mastics. Additionally different finishes had different effects on binder properties. The major finding of this study is that different polyester fibers, even from the same manufacturer, may not necessarily perform the same in an asphalt mixture. It is important to use fibers that are compatible with the particular asphalt binder that is being used because of the significance of the binder source on the interaction between the finish and the binder.

  10. Use of rubber crumb for preparation of asphalt-concrete mixtures

    Directory of Open Access Journals (Sweden)

    Yerbol Tileuberdi

    2012-03-01

    Full Text Available In this article use of rubber crumb from spent tire for preparation of rubber-bitumen compounds is investigated. Then the rubber-bitumen compositions are used in composition of asphalt concrete mixes .

  11. Use of rubber crumb for preparation of asphalt-concrete mixtures

    OpenAIRE

    Yerbol Tileuberdi; S. Kozbakarova; Yerdos Ongarbayev; B. Tuleutaev; Zulkhair Mansurov

    2012-01-01

    In this article use of rubber crumb from spent tire for preparation of rubber-bitumen compounds is investigated. Then the rubber-bitumen compositions are used in composition of asphalt concrete mixes .

  12. The addition effects of macro and nano clay on the performance of asphalt binder

    Directory of Open Access Journals (Sweden)

    M. El-Shafie

    2012-12-01

    Full Text Available The study was carried out to explore the addition effect of macro and organically modified nanoclay on the physical and mechanical properties of asphalt binders. Both macroclay and modified nanoclay were blended in an asphalt binder in various percentages (starting from 2% to 8%. The blended asphalt binders were characterized using kinematic viscosity (C.st, softening point (°C, and penetration and compared with anunmodified binder. The tensile strength of the asphalt binders was also tested as a function of clay types and content%. The results of the study indicated an increase in softening point; kinematics viscosity and decrease in binder penetration. The tensile strength of modified clay binders was enhanced at all percentages by a comparison with both macroclay and unmodified binders. The best improvements in the modified binders were obtained with 6% nanoclay.

  13. Influence of Polyethylene Glycol on Asphaltic Concrete for Cubical and Rod shaped Aggregates

    Directory of Open Access Journals (Sweden)

    U. Arun Kumar

    2014-02-01

    Full Text Available Aggregates are the principle material in pavement construction. Conventional road aggregates in India are natural aggregates obtained by crushing rocks. Aggregate characteristics such as particle size, shape, and texture etc.., influence the performance and serviceability of pavement. Pavements laid with polymer modified asphalt exhibits greater resistance to rutting, thermal cracking and fatigue damages and hence these were used at locations of higher stress. The present work concentrates on aggregate characteristics which include the shape indices. The particle shapes namely Cubical and Rod are being used in the study. The study shows the behavior of the two shapes of aggregate in terms of Penetration, Ductility, Softening Point and Marshall Stability tests with varying percentages of asphalt and also with varying the percentages of PEG. The results of unmodified asphalt mix are compared with the modified asphalt mix against some critical Marshall Mix parameters.

  14. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete.

    Science.gov (United States)

    Ahmedzade, Perviz; Sengoz, Burak

    2009-06-15

    This paper presents the influences of the utilization of steel slag as a coarse aggregate on the properties of hot mix asphalt. Four different asphalt mixtures containing two types of asphalt cement (AC-5; AC-10) and coarse aggregate (limestone; steel slag) were used to prepare Marshall specimens and to determine optimum bitumen content. Mechanical characteristics of all mixtures were evaluated by Marshall stability, indirect tensile stiffness modulus, creep stiffness, and indirect tensile strength tests. The electrical sensitivity of the specimens were also investigated in accordance with ASTM D257-91. It was observed that steel slag used as a coarse aggregate improved the mechanical properties of asphalt mixtures. Moreover, volume resistivity values demonstrated that the electrical conductivity of steel slag mixtures were better than that of limestone mixtures.

  15. A review on using crumb rubber in reinforcement of asphalt pavement.

    Science.gov (United States)

    Mashaan, Nuha Salim; Ali, Asim Hassan; Karim, Mohamed Rehan; Abdelaziz, Mahrez

    2014-01-01

    An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM) obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste materials, and it is believed that crumb rubber modifier (CRM) could be an alternative polymer material in improving hot mix asphalt performance properties. In this paper, a critical review on the use of crumb rubber in reinforcement of asphalt pavement will be presented and discussed. It will also include a review on the effects of CRM on the stiffness, rutting, and fatigue resistance of road pavement construction.

  16. Effect of Components on the Performance of Asphalt Modiifed by Waste Packaging Polyethylene

    Institute of Scientific and Technical Information of China (English)

    ZHANG Maorong; FANG Changqing; ZHOU Shisheng; CHENG Youliang; YU Ruien; LIU Shaolong; LIU Xiaolong; SU Jian

    2016-01-01

    Waste packaging polyethylene (WPE) was used to modify raw asphalt by melt blending the components at 190℃ for 1 h in a simple mixer and subsequently machining them at 120℃ for 1 h in a high-speed shearing machine. The effect of modiifcation on the degree of the penetration, the softening point and the ductility of the asphalt was studied using lfuorescent microscopy, infrared spectrometry, component changes and various other techniques. The experimental results showed that no chemical reactions took place in the components themselves (saturate, aromatic, asphaltene and resin) during the modifications. The softening point and penetration of the asphalt were found to be closely related to the resulting contents of the asphaltene, saturate and resin components. In addition, aromatics were identified as having the greatest impact on the ductility of the asphalt.

  17. Field Performance of Asphalt Pavements with New Technologies in Northern Nevada

    Science.gov (United States)

    Faeth, Benjamin Michael

    The Regional Transportation Commission (RTC) of the Washoe Valley Area has been tasked to determine if three advanced asphalt pavement technologies and one modified aggregate gradation are suitable for implementation within Reno, Stead, and Sparks Nevada. This was accomplished through research and test roads and Intersections to determine if Recycled Asphalt Pavement (RAP), Warm Mix Asphalt (WMA), Polymer-Modified Asphalt Binder, and the Type 2-R aggregate gradation were succeeding in their design plans. Over the course of several years the streets being used by RTC to test the technologies are succeeding within their design lifespans, and the Intersections being used to test the Type 2-R aggregate gradation are showing significant resistance to rutting. Due to the roads and Intersections not being more than 10 years old, these conclusions are subject to change over time.

  18. Development of superior asphalt recycling agency: Phase 1, Technical feasibility. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bullin, J.A.; Glover, C.J.; Davison, R.R.; Lin, Moon-Sun; Chaffin, J.; Liu, Meng; Eckhardt, C.

    1996-04-01

    About every 12 years, asphalt roads must be reworked, and this is usually done by placing thick layers (hot-mix overlays) of new material on top of failed material, resulting in considerable waste of material and use of new asphalt binder. A good recycling agent is needed, not only to reduce the viscosity of the aged material but also to restore compatibility. Objective is to establish the technical feasibility (Phase I) of determining the specifications and operating parameters for producing high quality recycling agents which will allow most/all the old asphalt-based road material to be recycled. It is expected that supercritical fractionation can be used. The advanced road aging simulation procedure will be used to study aging of blends of old asphalt and recycling agents.

  19. Organic Tracers from Asphalt in Propolis Produced by Urban Honey Bees, Apis mellifera Linn.

    Science.gov (United States)

    Alqarni, Abdulaziz S.; Rushdi, Ahmed I.; Owayss, Ayman A.; Raweh, Hael S.; El-Mubarak, Aarif H.; Simoneit, Bernd R. T.

    2015-01-01

    Propolis is a gummy material produced by honey bees to protect their hives and currently has drawn the attention of researchers due to its broad clinical use. It has been reported, based only on observations, that honey bees also collect other non-vegetation substances such as paint or asphalt/tar to make propolis. Therefore, propolis samples were collected from bee hives in Riyadh and Al-Bahah, a natural area, Saudi Arabia to determine their compositional characteristics and possible sources of the neutral organic compounds. The samples were extracted with hexane and analyzed by gas chromatography-mass spectrometry. The results showed that the major compounds were n-alkanes, n-alkenes, methyl n-alkanoates, long chain wax esters, triterpenoids and hopanes. The n-alkanes (ranging from C17 to C40) were significant with relative concentrations varying from 23.8 to 56.8% (mean = 44.9+9.4%) of the total extracts. Their odd carbon preference index (CPI) ranged from 3.6 to 7.7, with a maximum concentration at heptacosane indicating inputs from higher plant vegetation wax. The relative concentrations of the n-alkenes varied from 23.8 to 41.19% (mean = 35.6+5.1%), with CPI = 12.4-31.4, range from C25 to C35 and maximum at tritriacontane. Methyl n-alkanoates, ranged from C12 to C26 as acids, with concentrations from 3.11 to 33.2% (mean = 9.6+9.5%). Long chain wax esters and triterpenoids were minor. The main triterpenoids were α- and β-amyrins, amyrones and amyryl acetates. The presence of hopanes in some total extracts (up to 12.5%) indicated that the bees also collected petroleum derivatives from vicinal asphalt and used that as an additional ingredient to make propolis. Therefore, caution should be taken when considering the chemical compositions of propolis as potential sources of natural products for biological and pharmacological applications. Moreover, beekeepers should be aware of the proper source of propolis in the flight range of their bee colonies. PMID

  20. Organic Tracers from Asphalt in Propolis Produced by Urban Honey Bees, Apis mellifera Linn.

    Science.gov (United States)

    Alqarni, Abdulaziz S; Rushdi, Ahmed I; Owayss, Ayman A; Raweh, Hael S; El-Mubarak, Aarif H; Simoneit, Bernd R T

    2015-01-01

    Propolis is a gummy material produced by honey bees to protect their hives and currently has drawn the attention of researchers due to its broad clinical use. It has been reported, based only on observations, that honey bees also collect other non-vegetation substances such as paint or asphalt/tar to make propolis. Therefore, propolis samples were collected from bee hives in Riyadh and Al-Bahah, a natural area, Saudi Arabia to determine their compositional characteristics and possible sources of the neutral organic compounds. The samples were extracted with hexane and analyzed by gas chromatography-mass spectrometry. The results showed that the major compounds were n-alkanes, n-alkenes, methyl n-alkanoates, long chain wax esters, triterpenoids and hopanes. The n-alkanes (ranging from C17 to C40) were significant with relative concentrations varying from 23.8 to 56.8% (mean = 44.9+9.4%) of the total extracts. Their odd carbon preference index (CPI) ranged from 3.6 to 7.7, with a maximum concentration at heptacosane indicating inputs from higher plant vegetation wax. The relative concentrations of the n-alkenes varied from 23.8 to 41.19% (mean = 35.6+5.1%), with CPI = 12.4-31.4, range from C25 to C35 and maximum at tritriacontane. Methyl n-alkanoates, ranged from C12 to C26 as acids, with concentrations from 3.11 to 33.2% (mean = 9.6+9.5%). Long chain wax esters and triterpenoids were minor. The main triterpenoids were α- and β-amyrins, amyrones and amyryl acetates. The presence of hopanes in some total extracts (up to 12.5%) indicated that the bees also collected petroleum derivatives from vicinal asphalt and used that as an additional ingredient to make propolis. Therefore, caution should be taken when considering the chemical compositions of propolis as potential sources of natural products for biological and pharmacological applications. Moreover, beekeepers should be aware of the proper source of propolis in the flight range of their bee colonies.

  1. A STUDY OF FATIGUE LIFE OF ASPHALT CONCRETE BASED ON SHUNGITE MINERAL POWDER

    OpenAIRE

    D. I. Chernousov; Vl. P. Podolsky; E. V. Trufanov; B. A. Bondarev

    2011-01-01

    Problem statement. Shortage of mineral powder stimulates seeking of new materials and technologiesby which traditional ones can be replaced without deterioration of their operating properties. Thatis why a study of mineral powder from shungite and development of new technologies of arrangementof high quality and durable asphalt concrete pavement based on shungite is an actual problem.Results. Bearing capacity and service life of asphalt concrete pavement is most completely characterizedby mod...

  2. Aging of Asphalt Symposium, September 17th 2014, Delft, the Netherlands

    OpenAIRE

    Erkens, S.M.J.G.; Scarpas, A.; Blab, R.; Glaser, R; Glover, C.; Oeser, M.; Porot, L.; Soenen, H.

    2015-01-01

    Technical specifications for the asphalt concrete properties are developed to be able to specify mixtures that will perform well in pavement applications. Being able to identify and determine properties related to pavement performance in practice is crucial for both road authorities and contractors, since it allows for design and risk management by determining design life times and reliability. However, the properties of Asphalt Concrete (AC) change over its lifetime and since most pavement l...

  3. Self Healing of Asphalt Mixtures: Towards a Better Understanding of the Mechanism

    OpenAIRE

    Qiu, J

    2012-01-01

    Traffic is increasing rapidly in terms of number of vehicles and also in axle loads. In order to maximize the availability of the pavement and to minimize hindrances to traffic because of maintenance works, long life pavements are needed. An asphalt pavement with self repairing capabilities is believed to be very useful to this respect. The self healing phenomenon of asphalt mixtures is known for many years by road engineers. Bituminous materials are expected to repair themselves during hot s...

  4. Evaluation of Fatigue Resistance for Modified Asphalt Concrete Mixtures Based on Dissipated Energy Concept

    OpenAIRE

    Khodary Moalla Hamed, Farag

    2010-01-01

    The performance of asphalt concrete pavement depends on the bitumen properties, asphalt concrete mixtures volumetric properties and external factors such as traffic volume and environment. Bitumen is a visco-elastic material where temperature and rate of load application have a great influence on its behavior. Conventional bitumen is exposed to a wide range of loading and weather conditions; it is soft in a hot environment and brittle in cold weather. Higher traffic volume produces high stres...

  5. Property Analysis of Exfoliated Graphite Nanoplatelets Modified Asphalt Model Using Molecular Dynamics (MD Method

    Directory of Open Access Journals (Sweden)

    Hui Yao

    2017-01-01

    Full Text Available This Molecular Dynamics (MD simulation paper presents a physical property comparison study between exfoliated graphite nanoplatelets (xGNP modified and control asphalt models, including density, glass transition temperature, viscosity and thermal conductivity. The three-component control asphalt model consists of asphaltenes, aromatics, and saturates based on previous references. The xGNP asphalt model was built by incorporating an xGNP and control asphalt model and controlling mass ratios to represent the laboratory prepared samples. The Amber Cornell Extension Force Field (ACEFF was used with assigned molecular electro-static potential (ESP charge from NWChem analysis. After optimization and ensemble relaxation, the properties of the control and xGNP modified asphalt models were computed and analyzed using the MD method. The MD simulated results have a similar trend as the test results. The property analysis showed that: (1 the density of the xGNP modified model is higher than that of the control model; (2 the glass transition temperature of the xGNP modified model is closer to the laboratory data of the Strategic Highway Research Program (SHRP asphalt binders than that of the control model; (3 the viscosities of the xGNP modified model at different temperatures are higher than those of the control model, and it coincides with the trend in the laboratory data; (4 the thermal conductivities of the xGNP modified asphalt model are higher than those of the control asphalt model at different temperatures, and it is consistent with the trend in the laboratory data.

  6. Characteristics of The Fillers Used for Realizing the Asphalt Mixtures in Romania

    Directory of Open Access Journals (Sweden)

    Irina-Mihaela Dămiean

    2005-01-01

    Full Text Available This paper presents the lab results for four types of filler used in producing the asphalt mixture in Romania, as well as other physical-chemical characteristics of a new type of filler, derivate of the grinding of the bituminous shists through a ball mill/crusher. Knowing these physical-chemical characteristics is crucial for asphalt mixtures due to the complex purpose of the filler.

  7. Black curves and creep behaviour of crumb rubber modified binders containing warm mix asphalt additives

    Science.gov (United States)

    Gallego, Juan; Rodríguez-Alloza, Ana María; Giuliani, Felice

    2016-08-01

    Warm mix asphalt (WMA) is a new research topic in the field of road pavement materials. This technology allows lower energy consumption and greenhouse gas (GHG) emissions by reducing compaction and placement temperatures of the asphalt mixtures. However, this technology is still under study, and the influence of the WMA additives has yet to be investigated thoroughly and clearly identified, especially in the case of crumb rubber modified (CRM) binders.

  8. A multiscale model for predicting the viscoelastic properties of asphalt concrete

    Science.gov (United States)

    Garcia Cucalon, Lorena; Rahmani, Eisa; Little, Dallas N.; Allen, David H.

    2016-08-01

    It is well known that the accurate prediction of long term performance of asphalt concrete pavement requires modeling to account for viscoelasticity within the mastic. However, accounting for viscoelasticity can be costly when the material properties are measured at the scale of asphalt concrete. This is due to the fact that the material testing protocols must be performed recursively for each mixture considered for use in the final design.

  9. Sensitivity analysis of longitudinal cracking on asphalt pavement using MEPDG in permafrost region

    OpenAIRE

    Chen Zhang; Hainian Wang; Zhanping You; Biao Ma

    2015-01-01

    Longitudinal cracking is one of the most important distresses of asphalt pavement in permafrost regions. The sensitivity analysis of design parameters for asphalt pavement can be used to study the influence of every parameter on longitudinal cracking, which can help optimizing the design of the pavement structure. In this study, 20 test sections of Qinghai–Tibet Highway were selected to conduct the sensitivity analysis of longitudinal cracking on material parameter based on Mechanistic-Empiri...

  10. Taphonomy and paleoecology of asphaltic Pleistocene vertebrate deposits of the western Neotropics

    OpenAIRE

    2013-01-01

    Asphaltic deposits, or "tar pits," present a unique opportunity to investigate the paleobiology and paleoecology of Quaternary mammals due to their tendency to accumulate and preserve remains of numerous taxa, along with associated materials that can aid in paleoenvironmental and chronological analyses. This role is especially important in areas with low preservation potential or incomplete sampling, such as the Neotropics. Fossil deposits in the asphaltic sediments of the Santa Elena Penin...

  11. Microstructure modeling and virtual test of asphalt mixture based on three-dimensional discrete element method

    Institute of Scientific and Technical Information of China (English)

    马涛; 张德育; 张垚; 赵永利; 黄晓明

    2016-01-01

    The objective of this work is to model the microstructure of asphalt mixture and build virtual test for asphalt mixture by using Particle Flow Code in three dimensions (PFC3D) based on three-dimensional discrete element method. A randomly generating algorithm was proposed to capture the three-dimensional irregular shape of coarse aggregate. And then, modeling algorithm and method for graded aggregates were built. Based on the combination of modeling of coarse aggregates, asphalt mastic and air voids, three-dimensional virtual sample of asphalt mixture was modeled by using PFC3D. Virtual tests for penetration test of aggregate and uniaxial creep test of asphalt mixture were built and conducted by using PFC3D. By comparison of the testing results between virtual tests and actual laboratory tests, the validity of the microstructure modeling and virtual test built in this study was verified. Additionally, compared with laboratory test, the virtual test is easier to conduct and has less variability. It is proved that microstructure modeling and virtual test based on three-dimensional discrete element method is a promising way to conduct research of asphalt mixture.

  12. Estimation of grain size in asphalt samples using digital image analysis

    Science.gov (United States)

    Källén, Hanna; Heyden, Anders; Lindh, Per

    2014-09-01

    Asphalt is made of a mixture of stones of different sizes and a binder called bitumen, the size distribution of the stones is determined by the recipe of the asphalt. One quality check of asphalt is to see if the real size distribution of asphalt samples is consistent with the recipe. This is usually done by first extracting the binder using methylenchloride and the sieving the stones and see how much that pass every sieve size. Methylenchloride is highly toxic and it is desirable to find the size distribution in some other way. In this paper we find the size distribution by slicing up the asphalt sample and using image analysis techniques to analyze the cross-sections. First the stones are segmented from the background, bitumen, and then rectangles are fit to the detected stones. We then estimate the sizes of the stones by using the width of the rectangle. The result is compared with both the recipe for the asphalt and with the result from the standard analysis method, and our method shows good correlation with those.

  13. Performance evaluation of open-graded epoxy asphalt concrete with two nominal maximum aggregate sizes

    Institute of Scientific and Technical Information of China (English)

    罗桑; 钱振东; 薛永超

    2015-01-01

    Open-graded friction course (OGFC) is applied to pavement surfaces to increase driving safety under wet conditions, and recently, to reduce tire/pavement noise. The durability of OGFC, however, has been a concern since conventional OGFC mixes last typically less than ten years before major maintenance or rehabilitation is needed. This work investigates a new open-graded asphalt mixture that uses epoxy asphalt as binder to improve mix durability. One type of epoxy asphalt that has been successfully applied to dense-graded asphalt concrete for bridge deck paving was selected. A procedure of compacting the mix into slab specimens was developed and a series of laboratory tests were conducted to evaluate the performance of the new mix, including Cantabro loss, permeability, friction, shear strength, and wheel rutting tests. Results show superior overall performance of the open-graded epoxy asphalt mix compared to conventional open-graded asphalt mix. There are also preliminary indications that the OGFC mix with 4.75-mm NMAS gradation can improve the resistance performance to raveling, while the OGFC mix with 9.5-mm NMAS gradation can improve the performance of surface friction at a high slip speed.

  14. Development of the Asphalt Modifier%沥青改性剂发展综述

    Institute of Scientific and Technical Information of China (English)

    顾绍兴; 马骏; 安会勇

    2015-01-01

    The concepts of asphalt and asphalt modifier were introduced. The asphalt modifier is usually divided into polymer type and non-polymer type. The research progress in various asphalt modifiers in recent years was introduced, and the modifying effect of various asphalt modifiers under different processes and conditions was researched. Finally, developing tendency of the asphalt modifier was put forward.%介绍了沥青及沥青改性剂的概念,通过把沥青改性剂分成聚合物沥青改性剂和非聚合物沥青改性剂两类进行讨论。讨论近些年来一些高校和研究人员对各种沥青改性剂研究的概况,研究在不同工艺和环境条件下,选用不同种类的沥青改性剂对沥青进行改性,并讨论了不同改性剂对沥青的改性效果。最后,还提出了沥青改性剂的发展方向。

  15. Investigating the Properties of Asphalt Concrete Containing Glass Fibers and Nanoclay

    Directory of Open Access Journals (Sweden)

    Hasan Taherkhani

    2016-06-01

    Full Text Available The performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. Therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. One common method of improving the performance of asphaltic mixtures is using different types of additives. This research investigated the effects of reinforcement by randomly distributed glass fibers and the simultaneous addition of nanoclayon some engineering properties of asphalt concrete have been investigated. The properties of a typical asphalt concrete reinforced by different percentages of glass fibers were compared with those containing both the fibers and nanoclay. Engineering properties, including Marshall stability, flow, Marshall quotient, volumetric properties and indirect tensile strength were studied. Glass fibers were used in different percentages of 0.2, 0.4 and 0.6% (by weight of total mixture, and nanoclay was used in 2, 4 and 6% (by the weight of bitumen. It was found that the addition of fibers proved to be more effective than the nanoclay in increasing the indirect tensile strength. However, nanoclay improved the resistance of the mixture against permanent deformation better than the glass fibers. The results also showed that the mixture reinforced by 0.2% of glass fiber and containing 6% nanoclay possessed the highest Marshall quotient, and the mixture containing 0.6% glass fibers and 2% nanoclay possessedthe highest indirect tensile strength.

  16. Normalization method for asphalt mixture fatigue equation under different loading frequencies

    Institute of Scientific and Technical Information of China (English)

    吕松涛; 郑健龙

    2015-01-01

    In order to analyze the effect of different loading frequencies on the fatigue performance for asphalt mixture, the changing law of asphalt mixture strengths with loading speed was revealed by strength tests under different loading speeds. Fatigue equations of asphalt mixtures based on the nominal stress ratio and real stress ratio were established using fatigue tests under different loading frequencies. It was revealed that the strength of the asphalt mixture is affected by the loading speed greatly. It was also discovered that the fatigue equation based on the nominal stress ratio will change with the change of the fatigue loading speed. There is no uniqueness. But the fatigue equation based on the real stress ratio doesn’t change with the loading frequency. It has the uniqueness. The results indicate the fatigue equation based on the real stress ratio can realize the normalization of the asphalt mixture fatigue equation under different loading frequencies. It can greatly benefit the analysis of the fatigue characteristics under different vehicle speeds for asphalt pavement.

  17. Investigation of Low Heat Accumulation Asphalt Mixture and Its Impact on Urban Heat Environment.

    Science.gov (United States)

    Xie, Jianguang; Yang, Zhaoxu; Liang, Leilei

    2015-01-01

    This study is focused on investigating the effectiveness of low heat accumulation asphalt mixture and its impact on the urban heat environment. Infrared radiation experiments showed that the temperature of the asphalt mixture decreased with the increase in far-infrared radiant material. The results also revealed that, compared to asphalt with 0% far-infrared radiant content, the asphalt material with a certain ratio of far-infrared radiation material had higher stability at high and low temperatures as well as good water absorption capacity. The Marshall stability of the specimen mixed with 6% far-infrared radiant was higher by 12.2% and had a residual stability of up to 98.9%. Moreover, the low-temperature splitting tensile strength of the asphalt mixture with 6% far-infrared radiation material increased by 21.3%. The friction coefficient of the asphalt mixtures with 6% and 12% far-infrared radiation material increased by 17.7% and 26.9%, respectively.

  18. A study on engineering characteristics of asphalt concrete using filler with recycled waste lime.

    Science.gov (United States)

    Sung Do, Hwang; Hee Mun, Park; Suk keun, Rhee

    2008-01-01

    This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures.

  19. Performance evaluation of open-graded epoxy asphalt concrete with two nominal maximum aggregate sizes

    Institute of Scientific and Technical Information of China (English)

    罗桑; 钱振东; 薛永超

    2015-01-01

    Open-graded friction course(OGFC) is applied to pavement surfaces to increase driving safety under wet conditions, and recently, to reduce tire/pavement noise. The durability of OGFC, however, has been a concern since conventional OGFC mixes last typically less than ten years before major maintenance or rehabilitation is needed. This work investigates a new open-graded asphalt mixture that uses epoxy asphalt as binder to improve mix durability. One type of epoxy asphalt that has been successfully applied to dense-graded asphalt concrete for bridge deck paving was selected. A procedure of compacting the mix into slab specimens was developed and a series of laboratory tests were conducted to evaluate the performance of the new mix, including Cantabro loss, permeability, friction, shear strength, and wheel rutting tests. Results show superior overall performance of the open-graded epoxy asphalt mix compared to conventional open-graded asphalt mix. There are also preliminary indications that the OGFC mix with 4.75-mm NMAS gradation can improve the resistance performance to raveling, while the OGFC mix with 9.5-mm NMAS gradation can improve the performance of surface friction at a high slip speed.

  20. Investigation of Low Heat Accumulation Asphalt Mixture and Its Impact on Urban Heat Environment.

    Directory of Open Access Journals (Sweden)

    Jianguang Xie

    Full Text Available This study is focused on investigating the effectiveness of low heat accumulation asphalt mixture and its impact on the urban heat environment. Infrared radiation experiments showed that the temperature of the asphalt mixture decreased with the increase in far-infrared radiant material. The results also revealed that, compared to asphalt with 0% far-infrared radiant content, the asphalt material with a certain ratio of far-infrared radiation material had higher stability at high and low temperatures as well as good water absorption capacity. The Marshall stability of the specimen mixed with 6% far-infrared radiant was higher by 12.2% and had a residual stability of up to 98.9%. Moreover, the low-temperature splitting tensile strength of the asphalt mixture with 6% far-infrared radiation material increased by 21.3%. The friction coefficient of the asphalt mixtures with 6% and 12% far-infrared radiation material increased by 17.7% and 26.9%, respectively.

  1. Thermomechanics of soft inelastics bodies with application to asphalt behavior

    Directory of Open Access Journals (Sweden)

    Kudrjavčeva Ljudmila T.

    2014-01-01

    Full Text Available Thermomechanical behavior of hot mix asphalt (HMA is considered. Its highly irregular microstructure is covered by the hierarchical approach. A brief survey of endochronic thermodynamics precedes constitutive consideration. Two constitutive models are discussed: classical Perzyna’s approach and tensor representation based approach. The second is superior due to its possibility to cover properly diverse multiaxial nonproportioal stress-strain histories. However, due to availability of experimental data the first model is applied to rutting problem through Abaqus FEM code with material user subroutine developed by the authors. Vakulenko’s thermodynamic time appropriate for aging is incorporated. Hyperelasticviscoplastic behavior is considered and some preliminary results are presented. [Projekat Ministarstva nauke Republike Srbije, br. 171004 i br. TR32036

  2. Parameter Characterisation of Asphalt Mixtures for Visco-Elastoplastic Analysis

    Institute of Scientific and Technical Information of China (English)

    陆阳; 廖敬梅; 廖军

    2002-01-01

    Asphalt mixtures exhibit strong viscous properties under repetitive loads. This phenomenon can be simulated in creep and recovery tests. By applying the visco-elastoplastic model proposed, data recorded in the tests are interpreted. It is emphasised that applicability of the visco-elastoplastic model depends on the proper method of characterising parameters involved in the constitutive equations. Since two or more strain components of elasticity and viscosity coexist during the loading or unloading, a measuring system of two loggers is introduced to decouple these components. Test data are analysed in three steps as elastic, visco-elastic and visco-plastic evaluations, using the records collected at the moment of unloading, during the periods of recovery and creep respectively. Factors that may influence the accuracy of data analysis are also discussed.

  3. Investigation of Adding Proportion of RAP in Recycled Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    Cao He

    2016-01-01

    Full Text Available According to the relationship between gradation and proportion of Reclaimed Asphalt Pavement (RAP and design gradation of recycled mixture, the authors discussed the influence of proportion of RAP on gradation adjustment of recycled mixture. And then, recycled mixture with 0%, 30%, 50%, 70% of RAP were made, and Influence of proportion of RAP on high and low temperature performance, water stability and anti-aging performance of recycled mixture were discussed. The results and analysis indicate that gradation of recycled mixture would not be adjusted to aiming gradation if proportion of RAP was too big. With the increase of proportion of RAP, high temperature performance and anti-aging performance of recycled mixture enhanced, but low temperature performance and water stability decayed sharply. In practical application, reasonable proportion of RAP should be determined according to gradation, performance demand and economy of recycled mixture.

  4. Characteristics of dynamic triaxial testing of asphalt mixtures

    Science.gov (United States)

    Ulloa Calderon, Alvaro

    Due to the increasing traffic loads and tire pressures, a serious detrimental impact has occurred on flexible pavements in the form of excessive permanent deformation once the critical combination of loading and environmental conditions are reached. This distress, also known as rutting, leads to an increase in road roughness and ultimately jeopardizes the road users' safety. The flow number (FN) simple performance test for asphalt mixtures was one of the final three tests selected for further evaluation from the twenty-four test/material properties initially examined under the NCHRP 9-19 project. Currently, no standard triaxial testing conditions in terms of the magnitude of the deviator and confining stresses have been specified. In addition, a repeated haversine axial compressive load pulse of 0.1 second and a rest period of 0.9 second are commonly used as part of the triaxial testing conditions. The overall objective of this research was to define the loading conditions that created by a moving truck load in the hot mixed asphalt (HMA) layer. The loading conditions were defined in terms of the triaxial stress levels and the corresponding loading time. Dynamic mechanistic analysis with circular stress distribution was used to closely simulate field loading conditions. Extensive mechanistic analyses of three different asphalt pavement structures subjected to moving traffic loads at various speeds and under braking and non-braking conditions were conducted using the 3D-Move model. Prediction equations for estimating the anticipated deviator and confining stresses along with the equivalent deviator stress pulse duration as a function of pavement temperature, vehicle speed, and asphalt mixture's stiffness have been developed. The magnitude of deviator stress, sigmad and confining stress, sigmac, were determined by converting the stress tensor computed in the HMA layer at 2" below pavement surface under a moving 18-wheel truck using the octahedral normal and shear

  5. Sustainable Production of Asphalt using Biomass as Primary Process Fuel

    DEFF Research Database (Denmark)

    Bühler, Fabian; Nguyen, Tuong-Van; Elmegaard, Brian

    2016-01-01

    The production of construction materials is very energy intensive and requires large quantities of fossil fuels.Asphalt is the major road paving material in Europe and is being produced primarily in stationary batch mixasphalt factories. The production process requiring the most energy...... is the heating and drying of aggregate,where natural gas, fuel oil or LPG is burned in a direct-fired rotary dryer. Replacing this energy source with amore sustainable one presents several technical and economic challenges, as high temperatures, short startuptimes and seasonal production variations are required....... This paper analyses different pathways for the useof biomass feedstock as a primary process fuel. The analysed cases consider the gasification of straw andwood chips and the direct combustion of wood pellets. The additional use of syngas from the gasifier for theproduction of heat or combined heat and power...

  6. Microstructural and rheological analysis of fillers and asphalt mastics

    Science.gov (United States)

    Geber, R.; Simon, A.; Kocserha, I.; Buzimov, A.

    2017-01-01

    Pavements are made of different grades of mineral aggregates and organic binder. The aggregates are sorted in different sizes and different amount which are mixed together with bitumen. The finest mineral fraction (ddolomite) which are used in Hungarian road constructions with the use of different techniques (particle size distribution, scanning electronmicroscopy tests, mercury intrusion porosimetry, BET specific surface tests, determination of hydrophobicity). After the tests of fillers, asphalt mastics were prepared and rheological examinations were obtained. These examinations served to observe the interaction and the effect of fillers. The stiffening effect of fillers and the causes of rutting were also investigated. Based on our results, it can be stated that particle size, hydrophobic properties and the amount of fillers highly affect the rheological properties of mastics.

  7. Calculation of the temperature of asphalt concrete at making the joints of multilane road pavement of non-rigid type

    OpenAIRE

    Giyasov Botir Iminzhonovich; Kupriyanov Roman Valer’evich; Andrianov Konstantin Anatol’evich; Zubkov Anatoliy Fedorovich

    2015-01-01

    The construction quality of road surface of non-rigid type essentially depend on providing the temperature regimes in the process of laying and packing of hot asphalt concrete mixtures. In order to provide the required characteristics of asphalt concrete due to the surface width it is necessary to provide the temperature regimes of hot asphalt concrete mixture in the zones of lane connection. The hot mixture is promptly cooling right after laying within several minutes, which results, accordi...

  8. Performance of the heavy fraction of pyrolysis oil derived from waste printed circuit boards in modifying asphalt.

    Science.gov (United States)

    Yang, Fan; Sun, Shuiyu; Zhong, Sheng; Li, Shenyong; Wang, Yi; Wu, Jiaqi

    2013-09-15

    The focus of this research was the development of efficient and affordable asphalt modifiers. Pyrolysis oil was produced as a byproduct from the pyrolysis of waste printed circuit boards (WPCBs). The high boiling point fraction was separated from the pyrolysis oil through distillation and is referred to as the heavy fraction of pyrolysis oil (HFPO). The HFPO was tested as an asphalt modifier. Three asphalt modifiers were tested: HFPO; styrene-butadiene rubber (SBR); and HFPO + SBR (1:1). The physical properties and road performance of the three modified asphalts were measured and evaluated. The results have shown that when the amount of modifier was less than 10%, the HFPO modified asphalt had the highest softening point of the three. The dynamic stability (DS) and water resistance of the asphalt mixture with the HFPO modified asphalt was 10,161 cycles/mm and 87.2%, respectively. The DS was much larger than for the HFPO + SBR and SBR modified asphalt mixtures. These results indicate that using HFPO as an asphalt modifier has significant benefits not only for road engineering but also for resource recycling.

  9. European project RE-ROAD: round robin test on extraction and recovery methods for Reclaimed Asphalts with Polymer modified Bitumens

    OpenAIRE

    MOUILLET, Virginie; PIERARD, Nathalie; Mollenhauer, Konrad; GINOUX, Marc Stéphane; Gabet, Thomas; Farcas, Fabienne; MIRSKI, Krzysztof; KEMPERLE, Ema

    2012-01-01

    The recycling of Reclaimed Asphalt (RA) in new hot-mix asphalt (HMA) is a common practice throughout Europe. However, Reclaimed Asphalts (RA) are complex materials and the use of significant proportions of RA involves a more accurate control of their characteristics. This is an essential step for asphalt mix design and a key factor to obtain good performances. At this time there is clearly a lack of knowledge and adequate test methods to analyse RA with Polymer modified Bitumens (PmBs). The p...

  10. Bitumen workers handling mastic versus rolled asphalt in a tunnel: assessment of exposure and biomarkers of irritation and genotoxicity.

    Science.gov (United States)

    Raulf-Heimsoth, Monika; Marczynski, Boleslaw; Spickenheuer, Anne; Pesch, Beate; Welge, Peter; Rühl, Reinhold; Bramer, Rainer; Kendzia, Benjamin; Heinze, Evelyn; Angerer, Jürgen; Brüning, Thomas

    2011-06-01

    Emission levels of vapours and aerosols of bitumen are different when processing rolled asphalt compared to mastic asphalt, with working temperatures up to 180 and 250°C, respectively. During the Human Bitumen Study, we examined six workers handling rolled asphalt and mastic asphalt in two consecutive weeks at the same construction site in a tunnel. In addition to the determination of exposure to bitumen and polycyclic aromatic hydrocarbons (PAH) during shift, we examined urinary PAH metabolites, irritative and genotoxic effects before and after shift. Median personal shift concentration of vapours and aerosols of bitumen was 1.8 (range 0.9-2.4) mg/m(3) during the application of rolled asphalt and 7.9 (range 4.9-11.9) mg/m(3) when mastic asphalt was applied. Area measurement of vapours and aerosols of bitumen revealed higher concentrations than the personal measurements for mastic asphalt (mastic asphalt: 34.9 mg/m(3); rolled asphalt: 1.8 mg/m(3)). Processing mastic asphalt was associated also with higher PAH concentrations. Urinary 1-hydroxypyrene and the sum of 1-, 2+ 9-, 3- and 4-hydroxyphenanthrene increased slightly during shift without clear difference between mastic and rolled asphalt application. However, the post-shift urinary PAH-metabolite concentrations did not reflect the different PAH exposure during mastic and rolled asphalt application. Individual workers could be identified by their spirometry results indicating that these data reflect more chronic than acute effects. In most cases, an increase of 8-oxodGuo adducts was observed during shift that was independent of the asphalt application. 8-oxodGuo and (+)-anti-BPDE-DNA adducts were higher than in exposed workers of the Human Bitumen Study independent of the asphalt application. The DNA-strand breaks were considerably higher pre-shift and decreased during shift. In this study, mastic asphalt application led to significantly higher exposure to vapours and aerosols of bitumen, as well as to airborne

  11. Dermal exposure and urinary 1-hydroxypyrene among asphalt roofing workers.

    Science.gov (United States)

    McClean, M D; Rinehart, R D; Sapkota, A; Cavallari, J M; Herrick, R F

    2007-01-01

    The primary objective of this study was to identify significant determinants of dermal exposure to polycyclic aromatic compounds (PACs) among asphalt roofing workers and use urinary 1-hydroxyprene (1-OHP) measurements to evaluate the effect of dermal exposure on total absorbed dose. The study population included 26 asphalt roofing workers who performed three primary tasks: tearing off old roofs (tear-off), putting down new roofs (put-down), and operating the kettle at ground level (kettle). During multiple consecutive work shifts (90 workerdays), dermal patch samples were collected from the underside of each worker's wrists and were analyzed for PACs, pyrene, and benzo(a)pyrene (BAP). During the same work week, urine samples were collected at pre-shift, post-shift, and bedtime each day and were analyzed for 1-OHP (205 urine samples). Linear mixed effects models were used to evaluate the dermal measurements for the purpose of identifying important determinants of exposure, and to evaluate urinary 1-OHP measurements for the purpose of identifying important determinants of total absorbed dose. Dermal exposures to PAC, pyrene, and BAP were found to vary significantly by roofing task (tear-off > put-down > kettle) and by the presence of an old coal tar pitch roof (pitch > no pitch). For each of the three analytes, the adjusted mean dermal exposures associated with tear-off (812 ng PAC/cm2, 14.9 ng pyrene/cm2, 4.5 ng BAP/cm2) were approximately four times higher than exposures associated with operating the kettle (181 ng PAC/cm2, 4.1 ng pyrene/cm2, 1.1 ng BAP/cm2). Exposure to coal tar pitch was associated with a 6-fold increase in PAC exposure (p = 0.0005), an 8-fold increase in pyrene exposure (p pitch roof was removed, accounting for a 3.7-fold difference at pre-shift (p = 0.01), a 5.0-fold difference at post-shift (p = 0.004), and a 7.2-fold difference at bedtime (p = 0.002). The pyrene measurements obtained during the work shift were found to be strongly correlated

  12. 泡沫沥青温拌沥青混合料配合比设计方法及路用性能研究%Study on Design Method and Road Performance of Foam Asphalt Warm Asphalt Mixture

    Institute of Scientific and Technical Information of China (English)

    熊家元

    2016-01-01

    foam asphalt warm mix asphalt mixture is a new material,new energy efficient and envi-ronmentally friendly pavement engineering .draw lessons fromsubstantial warm foam asphalt technolo-gyproject,this article Carry on warm mix asphalt foam mix design method,while the warm mix asphalt foam road performance with the same type of hot mix asphalt were compared.Test results show that:rec-ommend to“4% void method”to determine the mixing temperature of foam warm asphalt mixture,Mar-shall method of foam temperature on the optimum proportion of asphalt mixture,The road performance verification,foam warm mix asphalt mixture has better high temperature stability,but its water stability and low temperature crack resistance is poor,the fatigue performance foam warm mix asphalt mixture is 90% of the same type asphalt mixture.Comprehensive road performance of both foam asphalt warm as-phalt mixture and hot mix asphalt are relatively close.%泡沫沥青温拌沥青混合料是一种全新的节能环保型路面新材料,借鉴实体工程采用的温拌泡沫沥青技术,开展温拌泡沫沥青混合料配合比设计方法研究,同时将温拌泡沫沥青混合料的路用性能与同类型热拌沥青混合料进行了对比。试验结果表明:推荐采用“4%空隙率法”确定泡沫沥青温拌混合料的拌合温度,以马歇尔法确定泡沫温拌沥青混合料的最佳油石比,经路用性能验证,泡沫温拌沥青混合料具有较好的高温稳定性,但其水稳定性和低温抗裂性稍差,泡沫温拌沥青混合料疲劳性能为同类型沥青混合料的90%,泡沫温拌和热拌沥青混合料的综合路用性能比较接近。

  13. 橡胶沥青的改性机理%Rubber asphalt modification mechanism

    Institute of Scientific and Technical Information of China (English)

    王笑风; 曹荣吉

    2011-01-01

    In light of the complexity of rubber asphalt modification mechanism, such means as scanning electron microscopy, infrared spectroscopy, differential thermal analysis, microscopic structure analysis, component analysis were adopted to study the components of the asphalt before and after modifying, and chemical analysis of rubber powder are adopted to study the modification mechanism of asphalt rubber blending system. The results indicate that the swollen rubber powder is mutually-adhered to form a network structure, and the matrix asphalt changes from homogeneous body into a two-phase continuous blending structure system constituted by rubber powder and asphalt; physical swelling dominates the system, accompanied by a little chemical reaction and with the prolongation of time, the chemical reaction becomes more obvious; the swollen rubber powder forms damping effects to improve the viscosity of rubber asphalt. The modification of asphalt comes from two aspects: firstly, the network structure formed by swollen rubber powder; secondly, the modification of the asphalt composition resulting from rubber powder desulphurization degradation. The natural rubber has better performance in modifying asphalt than synthetic rubber. 4 tabs, 9 figs. 12 refs.%针对橡胶沥青改性机理的复杂性,采用扫描电镜、红外光谱、差热分析、微观结构分析、组分分析及胶粉化学分析等方法,研究了橡胶沥青混溶体系的改性机理.结果表明:胶粉溶胀后互相粘连,形成网络结构,基质沥青由匀质体变成了胶粉和沥青构成的两相连续共混结构体系;胶粉与基质沥青间以物理溶胀为主,但存在弱化学反应,且随时间延长,化学反应越明显;溶胀胶粉形成阻尼作用,提高了橡胶沥青粘度;沥青的改性源于溶胀胶粉构成的网络结构和胶粉脱硫降解对沥青组分的改善作用;天然橡胶对沥青的改性效果优于合成橡胶.

  14. Effects of Nominal Maximum Aggregate Size on the Performance of Stone Matrix Asphalt

    Directory of Open Access Journals (Sweden)

    Hongying Liu

    2017-01-01

    Full Text Available It is well known that the performance of hot mix asphalt (HMA in service life is closely related to a proper aggregate gradation. A laboratory study was conducted to investigate the effects of nominal maximum aggregate size (NMAS on the performance of stone matrix asphalt (SMA. The volumetric characteristics and performance properties obtained from wheel tracking tests, permeability test, beam bending test, contabro test are compared for SMA mixes with different NMAS. The results indicated that voids in mineral aggregate (VMA and voids filled with asphalt (VFA of SMA mixtures increased with a decrease of aggregate size in aggregate gradation. SMA30 had the lowest optimum asphalt content among all the mixtures. Increase of NMAS contributed to improvement of the rutting resistance of SMA mixtures. However, a decrease of NMAS showed better cracking and raveling resistance. Permeability rate of SMA was primarily affected by the air voids (AV and break point sieve, but was also sensitive to aggregate gradation to some extent, with reduced NMAS corresponding to less permeability rate. Based on the test results, SMA5 and SMA13 are suggested to be used as a water-proof layer in bridge deck pavement, and SMA20 and SMA30 are suggested to be used as binder course in asphalt pavement, which needs to possess superior rutting resistance at high temperature.

  15. The Effects of Salt on Rheological Properties of Asphalt after Long-Term Aging

    Directory of Open Access Journals (Sweden)

    Xin Yu

    2013-01-01

    Full Text Available Limited studies in recent years have shown that asphalt pavement subject to seawater in coastal regions or deicing salt in cold regions may be seriously damaged after being soaked in saline water for a long time. However, there is limited research into the influence of salt on rheological properties of asphalt after long-term aging. In this study, rheological properties of unmodified and polymer-modified asphalt after long-term aging were tested after being soaked in different concentrations of salt (0.3%~5% for different durations (1 day~30 days. Orthogonal array based on the Taguchi method was used for experimental design. The frequency sweep tests were performed on the specimens of aged asphalt after being soaked for complex modulus and phase angle master curves and ultimate fatigue temperature. BBR tests were performed for stiffness. The test results indicate that saline water appears to reduce low temperature properties and fatigue resistance properties and improved high temperature properties of aged asphalt, and it also affects the sensitivity of complex modulus and phase angles at low frequencies.

  16. Dynamic Properties of Footbridges: Influence of Asphalt Pavement and Support Conditions

    Directory of Open Access Journals (Sweden)

    Weber Benedikt

    2015-01-01

    Full Text Available Natural frequencies and damping ratios are important parameters in the design of footbridges against vibrations. Although not normally considered in calculations, non-structural elements such as the asphalt pavement and the supports can have a significant influence on the dynamic properties. In this article we present results from vibration tests conducted on four footbridges over the last few years covering a wide range of asphalt temperatures. The experiments show that both the natural frequencies and the damping ratios can change significantly with temperature. In one particular case, a variation in natural frequency of 25% has been observed between high and low asphalt temperatures. An additional damping of around 1% due to the asphalt pavement has been detected. To more clearly understand the experimental results, the bridges were also analysed numerically using a visco-elastic material for the asphalt. The analysis of the experimental results also revealed that other non-structural elements can have a large influence on dynamic properties of bridges. In two cases, the supports did not perform as expected and lead to surprising results.

  17. Institutional Analysis Of Policy In Asphalt Mining District Buton Southeast Sulawesi Province Indonesia

    Directory of Open Access Journals (Sweden)

    Aris Mahmud

    2015-06-01

    Full Text Available Abstract This study aims to determine the institutional form of formal informal institutional and transaction costs in mining policy implementation asphalt in Buton with reference to the institutional theory. This study used a qualitative research method with a case study approach. The technique of collecting data through in-depth interviews and documentation. Data were analyzed by using data reduction data presentation verification or conclusion. The results showed that the formal institutional policies asphalt mining in Buton form of government regulations that are divided into three levels of regulation of the central government regulations Southeast Sulawesi Provincial Government and Local Government Buton the agreement in the form of agreementmou between local government and entrepreneurs asphalt and contract in the form of mining license. Transaction costs in mining policy implementation Buton asphalt in the form of information search costs the cost of negotiation and execution of the contract the cost of enforcement and supervision of contract and non-market transactions costs into additional transaction costs in asphalt mining policy implementation.

  18. Analytical Study of the Wide Sleepers on Asphalt Trackbed in Consideration of Nonlinear Contact Condition

    Directory of Open Access Journals (Sweden)

    BuSeog Ju

    2013-08-01

    Full Text Available Recent years, domestic and international interest towards high-speed railway increases dramatically. As a consequence, researchers have shown interested on the track types and upper structure of railway too. Currently, generally used roadbed structure utilizes classical track. This structure has shown drawbacks including increased maintenance costs, train operation/run-ability at high speed, and decrease of passenger comfort. Therefore, many researches were conducted in order to overcome these challenges, by developing a concrete track structure, and asphalt trackbed system. The objective of current study was to evaluate the applicability of developed materials for an asphalt trackbed structure. Frictional force at the attached boundary between the developed asphalt materials and upperconcrete slab were assessed for performance evaluation. In the end, nonlinear contact model was developed, according to the result from performance evaluation. A wide sleeper for the actual asphalt trackbed was also designed using a developed non-linear attachment boundary model. Then, the structural safety evaluation was performed at HL-25 train load (the design load. In the case of HL-25 design load, RC wide sleepers showed a limitation on usability due to the tensile stress occurred in the lower part of the slab from the interaction with the asphalt trackbed. PC sleepers, with improved lower part tensile stress using a PC tendon, showed relatively stable structural behavior.

  19. Assessment of dynamic modulus of high density polypropylene waste fiber reinforcement in asphalt concrete

    Directory of Open Access Journals (Sweden)

    Hassan S. OTUOZE

    2015-12-01

    Full Text Available Traditional asphalt tests like Hveem and Marshall tests are at best mere characterization than effective test of pavement field performance because of complex viscoelastic behavior of asphalt. Mechanical properties otherwise called simple performance tests (SPT are performance criteria of asphalt. Dynamic modulus among other SPT’s like permanent deformation, fatigue cracking, thermal cracking, moisture susceptibility, shear and friction properties; determines stress-strain to time-temperature relationships that imparts on strength, service life and durability. The test followed the recommendations of NCHRP 1-37a (2004 and mixes were prepared using 0, 0.5, 1.0 and 1.5% HDPP contents. The parameters tested for dynamic modulus, /E*/, are stiffness, recoverable strain (ε, and phase angle (ξ. Time – temperature superposition (TTS called master curve was fitted using sigmoidal curve to interpolate the parameters beyond measured data set so as to observe the viscoelastic behavior outside the physical properties. The performance of 0.5% HDPP asphalt is better enhanced than the conventional asphalt to improve upon strength, service and durability.

  20. Evaluation of the treatment of chromite ore processing residue by ferrous sulfate and asphalt.

    Science.gov (United States)

    Moon, Deok Hyun; Wazne, Mahmoud; Koutsospyros, Agamemnon; Christodoulatos, Christos; Gevgilili, Halil; Malik, Moinuddin; Kalyon, Dilhan M

    2009-07-15

    The effectiveness of the treatment of chromite ore processing residue (COPR) with ferrous sulfate and encapsulation into asphalt were explored separately and in combination. The asphalt treatment was conducted by mixing COPR or ferrous sulfate pretreated COPR with varying amounts of asphalt. To assess the efficacy of the treatment, the leachability of toxicity characteristic leaching procedure (TCLP) total chromium (Cr) from all treated samples was determined for curing periods up to 16 months. X-ray absorption near edge structure (XANES) analyses were also performed to evaluate the Cr(6+) concentration in the selected samples. The combination treatment of ferrous sulfate and the encapsulation of the treated COPR into asphalt reduced the TCLP total Cr concentration to lower than the regulatory limit of 5mg/L for Cr contaminated soils, after 16 months. However, the Cr concentrations were still higher than the universal treatment standards (UTS) of 0.6 mg/L for hazardous waste. On the other hand, treatment with ferrous sulfate alone or the encapsulation of the COPR in asphalt failed to meet the TCLP total Cr concentration of 5mg/L, after 16 months. XANES analyses results showed that more than 75% Cr(6+) reduction was achieved upon pretreatment with ferrous sulfate.

  1. Effect of oxidation and extent of oxidation on biologically active PACs in asphalt products.

    Science.gov (United States)

    Trumbore, David; Osborn, Linda; Blackburn, Gary; Niebo, Ron; Kriech, Anthony; Maxim, L Daniel

    2011-10-01

    Recent studies have reported divergent results in rodent cancer assays using fume condensates from a variety of asphalt products. This paper presents results of a study investigating the role of oxidation, or extent of oxidation, on these findings. Five straight run asphalts, made from widely used crude oils, were used as inputs to both production scale and laboratory oxidation units and processed to a range of softening points used in common roofing products. For each of the five asphalts studied, the oxidation reaction significantly decreased measures of polycyclic aromatic compounds (PACs) that have been linked, previously and in analyses included in this study, to tumor induction in rodent bioassays. Mutagenicity index determined by the modified Ames assay was reduced between 41% and 50% from the input asphalt to the final oxidized product. A fluorescence method tuned to a subset of PAC compounds that have been associated with carcinogenic behavior in mouse bioassays was reduced between 39% and 71%. The decrease was largest in the first quarter of the oxidation reaction. These findings indicate that oxidation, by itself, was not a likely factor in the tumor induction seen in the previous studies. Rather, other factors such as the conditions of fume generation and crude source (coupled with possible differences in distillation endpoints) were more likely to have determined the outcomes. Analyses of previously published data, presented in this paper, suggest that the modified Ames and fluorescence assays are valuable screening tools for use in future health-related asphalt research.

  2. The effects of salt on rheological properties of asphalt after long-term aging.

    Science.gov (United States)

    Yu, Xin; Wang, Ying; Luo, Yilin; Yin, Long

    2013-01-01

    Limited studies in recent years have shown that asphalt pavement subject to seawater in coastal regions or deicing salt in cold regions may be seriously damaged after being soaked in saline water for a long time. However, there is limited research into the influence of salt on rheological properties of asphalt after long-term aging. In this study, rheological properties of unmodified and polymer-modified asphalt after long-term aging were tested after being soaked in different concentrations of salt (0.3%~5%) for different durations (1 day~30 days). Orthogonal array based on the Taguchi method was used for experimental design. The frequency sweep tests were performed on the specimens of aged asphalt after being soaked for complex modulus and phase angle master curves and ultimate fatigue temperature. BBR tests were performed for stiffness. The test results indicate that saline water appears to reduce low temperature properties and fatigue resistance properties and improved high temperature properties of aged asphalt, and it also affects the sensitivity of complex modulus and phase angles at low frequencies.

  3. Design of Small Stone Asphalt Mixture based on Anti-skidding Performance

    Institute of Scientific and Technical Information of China (English)

    LI Rui; LI Yanwei; SHI Xin; LIU Zhongwan; YANG Jianbo; PEI Jianzhong

    2012-01-01

    Small stone asphalt mixture (SSAM) was designed by Bailey method and coarse aggregate voids-filling method.The optimum asphalt content was determined by Marshal test.Surface texture depth for SSAM with different voidage,and the BPN of SSAM and SMA before after wet track abrasion were measured.The experimental results indicate that the surface texture depth increases with the decreasing of asphalt aggregate ratio.The SSAM with the optimal asphalt content has a good skid resistance.BPN of asphalt mixture decreases with the increasing of wearing time,but the extent of reduction is different.The reduction rate of BPN for SSAM is smaller than that of SMA,indicating that SSAM has a good skid resistance attenuation capacity.Finally,the other properties of SSAM are also evaluated,showing that the splitting strength and modulus and SSAM are higher than those of SMA,and the other properties of SSAM,such as high-temperature performance and water stability can also satisfy the technical requirements.

  4. Modelling and laboratory studies on the adhesion fatigue performance for thin-film asphalt and aggregate system.

    Science.gov (United States)

    Wang, Dongsheng; Yi, Junyan; Feng, Decheng

    2014-01-01

    Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the adhesion fatigue performance were also investigated. Experiment results show that asphalt has more important effect on the adhesion performance comparing with aggregate. Basalt, which is regarded as hydrophobic aggregates with low silica content, has better adhesion performance to asphalt binder when compared with granite. The effects of aging on the adhesion fatigue performance are different for PG64-22 and rubber asphalt. Long-term aging is found to reduce the adhesion fatigue lives for rubber asphalt and aggregate system, while the effect of long-term aging for aggregate and PG64-22 binder system is positive. Generally the increased stress amplitude and test temperature could induce greater damage and lead to less fatigue lives for adhesion test system.

  5. Development of a Full-Depth Wheel Tracking Test for Asphalt Pavement Structure: Methods and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Hui Wang

    2016-01-01

    Full Text Available The rutting performance of asphalt pavement structure relies on the high temperature properties of asphalt mixture as well as the pavement structure and thickness. In order to investigate the influence of the structure and thickness, a full-depth wheel tracking test is developed in this research by improving the conventional wheel tracking test apparatus. The newly proposed test method is capable of varying its load speed and load size, controlling its specimen temperature gradient, and simulating the support conditions of actual asphalt pavement. The full-depth wheel tracking test based rutting performance evaluation of different asphalt pavement structures indicates that it is not reasonable to explain the rutting performance of asphalt pavement structure from the point of view of single-layer asphalt mixture rutting performance. The developed full-depth wheel tracking test can be used to distinguish rutting performance of different asphalt pavement structures, and two of five typical asphalt pavement structures commonly used in Shanxi Province were suggested for use in practical engineering.

  6. First Observation of the Blending Zone Morphology at the Interface of Reclaimed Asphalt Binder and Virgin Bitumen

    NARCIS (Netherlands)

    Nahar, S.N.; Mohajeri, M.; Schmets, A.J.M.; Scarpas, T.; Van de Ven, M.F.C.; Schitter, G.

    2013-01-01

    One of the challenges in designing recycled asphalt mixtures with a high amount of RAP is to estimate the blending degree between RAP binder and the added virgin bitumen. The extent of blending is crucial in this case as asphalt concrete response is influenced by the final binder properties. This pa

  7. The Use of Coal Bottom Ash In Hot Mix Asphalt

    Directory of Open Access Journals (Sweden)

    Charles Begyina Kodjo Nketsiah

    2015-05-01

    Full Text Available Bottom ash is a waste material from coal burnt to generate electric power. It is incombustible and non-biodegradable; hence, the best way to dispose it is by recycling rather than incineration and land filling. Past research on bottom ash in road building have focused mainly on embankment filling, sub-base and base courses; except boiler slag which has received much attention in Hot Mix Asphalt (HMA. Bottom ash from Tanjung Bin Power Station was thus investigated through laboratory testing to justify its use in HMA construction in Malaysia. This Paper analysed the data with regards to performance in HMA. In the Marshall Mix design, the material largely satisfied the Stability, Flow and Stiffness requirements which were comparable to that of conventional aggregates, although void contents were a bit higher. When blended with granite, all the parameters were met. Contrary to past suggestions that bottom ash in HMA consumes more bitumen, the 6.4% (51.20g Optimum Bitumen Content (OBC achieved in this study does not necessarily translate into high consumption, compared to OBC of 5.3% (59.63g in the case of granite. The HMA also proved to be highly resistant to moisture-induced damage and satisfied the minimum JKR specification for Static Uniaxial Load Strain.

  8. Mathematical Approach in Rheological Characterizing of Asphalt Emulsion Residues

    Directory of Open Access Journals (Sweden)

    Seong Hwan Cho

    2015-01-01

    Full Text Available Three different emulsion residues, such as SS1HP, HFE90, and SS-1VH (trackless, and a base asphalt binder (PG 64-22 are compared to characterize rheological properties by using DSR test. In order to capture the emulsion properties, different frequencies (from 1 to 100 rad/sec at a 10% constant shear rate and temperatures (from −45°C to 75°C with 15°C increments were applied. Then, a master curve for shear modulus was plotted for each emulsion. The transition of the HFE90 emulsion from viscous to elastic behavior occurs at lower temperatures, compared to the other materials. This emulsion is known for performing in a wider temperature range as shown in the results. The trackless emulsion presents an elastic behavior at intermediate temperatures. This product is known as having very fast setting and high resistance to shear stresses. The trackless emulsion presents the highest viscous and elastic modulus, followed by the PG 64-22 binder, SS1HP, and HFE90 emulsion. Shear strength test results show a behavior between trackless emulsion and SS1HP similar to the frequency sweep test results performed by DSR.

  9. Exposing the nonlinear viscoelastic behavior of asphalt-aggregate mixes

    Science.gov (United States)

    Levenberg, Eyal; Uzan, Jacob

    2012-05-01

    In this study asphalt-aggregate mixes are treated as both viscoelastic and viscoplastic. Following a damage mechanics approach, a nonlinear viscoelastic constitutive formulation is generated from a linear formulation by replacing `applied stresses' with `effective viscoelastic stresses'. A non-dimensional scalar entity called `relative viscoelastic stiffness' is introduced; it is defined as the ratio of applied to effective viscoelastic stress and encapsulates different types of nonlinearities. The paper proposes a computational scheme for exposing these nonlinearities by uncovering, through direct analysis of any test data, changes experienced by the `relative viscoelastic stiffness'. In general terms, the method is based on simultaneous application of creep and relaxation formulations while preserving the interrelationship between the corresponding time functions. The proposed scheme is demonstrated by analyzing a uniaxial tension test and a uniaxial compression test (separately). Results are presented and discussed, unveiling and contrasting the character of viscoelastic nonlinearities in both cases. A conceptual viewpoint is offered to explain the observations, illustrating the requirements from any candidate constitutive theory.

  10. Effect of Carbon Nanofiber on Mechanical Behavior of Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Saeed Ghaffarpour Jahromi

    2015-09-01

    Full Text Available Uses of fibers to improve material properties have a scientific background in recent years in civil engineering. Use of Nanofiber reinforcement of materials refers to incorporating materials with desired properties within some other materials lacking those properties. Use of fibers for improvement is not a new phenomenon as the technique of fiber-reinforced bitumen began as early as 1950, but using nanofiber is a new idea. In this research the mechanical properties of asphalt mixture that have been modified with carbon nanofiber were investigated using mechanical tests, which can improve the performance of flexible pavements. To evaluate the effect of nanofiber contents on bituminous mixtures, laboratory investigations were carried out on the samples with and without nanofibers. During the course of this study, various tests were undertaken applying the Marshall test, indirect tensile test, resistance to fatigue cracking by using repeated load indirect tensile test and creep test. Carbon nanofiber exhibited consistency in results and it was observed that the addition of nanofiber can change the properties of bituminous mixtures, increase its stability and decrease the flow value. Results indicate that nanofiber have the potential to resist structural distress in the pavement and thus improve fatigue by increasing resistance to cracks or permanent deformation, when growing traffic loads. On the whole, the results show that the addition of carbon nanofiber will improve some of the mechanical properties such as fatigue and deformation in the flexible pavement.

  11. Investigation of γ-(2,3-Epoxypropoxypropyltrimethoxy Silane Surface Modified Layered Double Hydroxides Improving UV Ageing Resistance of Asphalt

    Directory of Open Access Journals (Sweden)

    Canlin Zhang

    2017-01-01

    Full Text Available γ-(2,3-Epoxypropoxypropyltrimethoxy silane surface modified layered double hydroxides (KH560-LDHs were prepared and used to improve the ultraviolet ageing resistance of asphalt. The results of X-ray photoelectron spectrometry (XPS indicated that KH560 has been successfully grafted onto the surface of LDHs. The agglomeration of LDHs particles notably reduced after KH560 surface modification according to scanning electron microscopy (SEM, which implied that the KH560 surface modification was helpful to promote the dispersibility of LDHs in asphalt. Then, the influence of KH560-LDHs and LDHs on the physical and rheological properties of asphalt before and after UV ageing was thoroughly investigated. The storage stability test showed that the difference in softening point (ΔS of LDHs modified asphalt decreased from 0.6 °C to 0.2 °C at an LDHs content of 1% after KH560 surface modification, and the tendency became more pronounced with the increase of LDH content, indicating that KH560 surface modification could improve the stability of LDHs in asphalt. After UV ageing, the viscous modulus (G’’ of asphalt significantly reduced, and correspondingly, the elastic modulus (G’ and rutting factor (G*/sin δ rapidly increased. Moreover, the asphaltene increased and the amount of “bee-like” structures of the asphalt decreased. Compared with LDHs, KH560-LDHs obviously restrained performance deterioration of the asphalt, and helped to relieve the variation of the chemical compositions and morphology of asphalt, which suggested that the improvement of KH560-LDHs on UV ageing resistance of asphalt was superior to LDHs.

  12. Studying asphalt binder fatigue pattern by using a dynamic shear rheometer

    Directory of Open Access Journals (Sweden)

    Oscar Javier Reyes Ortiz

    2011-01-01

    Full Text Available This article was aimed at determining fatigue test results regarding different types of binder when using a dynamic shear rheometer (DSR. The tests were carried out in stress conditions at 20ºC. The stress input signal was a constant amplitude, 1.59 Hz frequency sine wave. Asphalt binders B-13/22, B-40/50, B-60/70, B-80/00, B-150/200 and BM-3c (modified asphalt were studied. The test measured strain, complex modulus (G*, dissipated energy and dissipated energy ratio (DER with the number of cycles. Strain criteria were used for determining binder fatigue failure (DER. Failure was defined as the point at which (DER dropped 10% after peaking. Laws of asphalt fatigue were obtained from the strain and failure cycle results.

  13. Research on segregation evaluation methods of asphalt pavement based on air voids distribution

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Eye observation was used to evaluate the segregation degree of asphalt pavement, which was not much creditable. To the asphalt pavement, road surface texture measuring method which has appeared recently can identify gradational segregation; but it can't reflect the influence of the temperature segregation. However,using infrared temperature detector to evaluate the segregation must be taken during paving, which brings much inconvenience. In this paper, measuring the air voids distribution using non-nuclear density gauge to evaluate asphalt pavement segregation was introduced. Result shows that this method can directly reflect the comprehensive results of the two types of segregation in a high efficient and accurate way. Moreover, using the sketch map of segregation area can help to analyze the segregation reason visually.

  14. Asphalt emulsion radon barrier systems for uranium mill tailings: an overview of the technology

    Energy Technology Data Exchange (ETDEWEB)

    Baker, E.G.; Hartley, J.N.; Freeman, H.D.; Gates, T.E.; Nelson, D.A.; Dunning, R.L.

    1984-03-01

    Pacific Northwest Laboratory (PNL), under contract to the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP) office, has developed an asphalt emulsion cover system to reduce the release of radon from uranium mill tailings. The system has been field tested at Grand Junction, Colorado. Results from laboratory and field tests indicate that this system is effective in reducing radon release to near-background levels (<2.5 pCi m/sup -2/s/sup -1/) and has the properties required for long-term effectiveness and stability. Engineering specifications have been developed, and analysis indicates that asphalt emulsion covers are cost-competitive with other cover systems. This report summarizes the technology for asphalt emulsion radon barrier systems. 59 references, 45 figures, 36 tables.

  15. Viscoroute 2.0: a tool for the simulation of moving load effects on asphalt pavement

    CERN Document Server

    Chabot, Armelle; Deloffre, Lydie; Duhamel, Denis

    2010-01-01

    As shown by strains measured on full scale experimental aircraft structures, traffic of slow-moving multiple loads leads to asymmetric transverse strains that can be higher than longitudinal strains at the bottom of asphalt pavement layers. To analyze this effect, a model and a software called ViscoRoute have been developed. In these tools, the structure is represented by a multilayered half-space, the thermo-viscoelastic behaviour of asphalt layers is accounted by the Huet-Sayegh rheological law and loads are assumed to move at constant speed. First, the paper presents a comparison of results obtained with ViscoRoute to results stemming from the specialized literature. For thick asphalt pavement and several configurations of moving loads, other ViscoRoute simulations confirm that it is necessary to incorporate viscoelastic effects in the modelling to well predict the pavement behaviour and to anticipate possible damages in the structure.

  16. Effect of Rubberized Bitumen Blending Methods on Permanent Deformation of SMA Rubberized Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Herda Yati Katman

    2016-01-01

    Full Text Available This study aims at comparing the permanent deformation of Stone Mastic Asphalt (SMA rubberized asphalt mixtures produced by the wet process. In this study, rubberized binders were prepared using two different blending methods, namely, continuous blend and terminal blend. To study the creep behaviour of control and rubberized asphalt mixtures, the dynamic creep test was performed using Universal Materials Testing Apparatus (UMATTA at different temperatures and stress levels. Zhou three-stage creep model was utilized to evaluate the deformation characteristics of the mixtures. In all test conditions, the highest resistance to permanent deformation is showed by the rubberized mixtures produced with continuous blend binders. This study also reveals that the permanent deformation of rubberized mixtures cannot be predicted based on the characteristics of the rubberized binders.

  17. Study of the Internal Mechanical response of an asphalt mixture by 3-D Discrete Element Modeling

    DEFF Research Database (Denmark)

    Feng, Huan; Pettinari, Matteo; Hofko, Bernhard

    2015-01-01

    for all the distinct elements. The dynamic modulus and phase angle from uniaxial complex modulus tests of the asphalt mixtures in the laboratory have been collected. A macro-scale Burger’s model was first established and the input parameters of Burger’s contact model were calibrated by fitting......In this paper the viscoelastic behavior of asphalt mixture was investigated by employing a three-dimensional Discrete Element Method (DEM). The cylinder model was filled with cubic array of spheres with a specified radius, and was considered as a whole mixture with uniform contact properties...... with the lab test data of the complex modulus of the asphalt mixture. The Burger’s contact model parameters are usually calibrated for each frequency. While in this research a constant set of Burger’s parameters has been calibrated and used for all the test frequencies, the calibration procedure...

  18. Assessments of low emission asphalt mixtures produced using combinations of foaming agents

    Science.gov (United States)

    Mohd Hasan, Mohd Rosli

    The asphalt foaming techniques have been used over the last couple of decades as an alternative to the traditional method of preparing asphalt mixtures. Based on positive feedback from the industry, this study was initiated to explore and evaluate the performance of the Warm Mix Asphalt (WMA) mixture produced through a foaming process using physical and chemical foaming agents, which are ethanol and sodium bicarbonate (NaHCO3), respectively. The success of this project may lead to new theories and provide an environmentally friendly technique to produce asphalt mixtures. This may advance the understanding of the foaming process and improve the performance of WMA to support sustainable development. Theoretically, ethanol can function in the same manner as water but requires less energy to foam due to its lower boiling point, 78°C. During the asphalt foaming process, numerous bubbles were generated by the vaporized ethanol, which significantly increased the volume of the asphalt binder, hence the coating potential of aggregates improves. The sodium bicarbonate was incorporated to enhance the quantity of bubbles and its stability. Therefore, understanding foaming agents, their solubility, chemical reactions, chemical function groups and rheological properties of the foamed binder are essential to help control the foam structure and final properties of the foamed WMA mixture. In order to understand the overall performance of newly developed foaming WMA, this material was evaluated for moisture susceptibility, rutting potential, and resistance to fracture and thermal cracking. The coatability, workability and compactability of foamed asphalt mixtures during production were also evaluated. Based on the results, it was found that the newly proposed foaming WMA has high potential to promote sustainable development by lowering the energy consumption and impacts on the environment. The ethanol is efficient in lowering the viscosity of asphalt binders, enhancing the

  19. Analysis on durability of asphalt pavement%沥青路面耐久性分析

    Institute of Scientific and Technical Information of China (English)

    车守忠

    2011-01-01

    简要介绍了我国沥青混凝土路面使用现状,针对沥青路面的损坏问题进行了分析,分别阐述了影响沥青路面耐久性的内部因素和外部因素,从原材料、配合比、防水设计等方面入手提出了耐久性改善措施,以期指导实践。%This paper briefly introduced the current situation of asphalt concrete pavements in our country,according to the damage problems of asphalt pavement made analysis,elaborated separately the internal factors and external factors which affect the durability of asphalt pavement,put forward durability improvement measures from raw materials,mixing ratio,waterproof design and other aspects,in order to guide practice.

  20. Dynamic response of concrete pavement structure with asphalt isolating layer under moving loads

    Directory of Open Access Journals (Sweden)

    Jianmin Wu

    2014-12-01

    Full Text Available A three-dimensional finite element model (3D FEM is built using ABAQUS to analyze the dynamic response of a concrete pavement structure with an asphalt isolating layer under moving loads. The 3D model is prepared and validated in the state of no asphalt isolating layer. Stress and deflection at the critical load position are calculated by changing thickness, modulus of isolating layer and the combination between the isolating layer and concrete slab. Analysis result shows that the stress and deflection of the concrete slab increase with the increase of thickness. The stress and deflection of the concrete slab decrease with the increase of combination between the isolating layer and concrete slab. The influence of changing the isolating layer modulus to the stress and deflection of the concrete slab is not significant. From the results, asphalt isolating layer design is suggested in concrete pavement.

  1. Incorporation de particules de bardeaux d'asphalte de postconsommation dans les enrobes bitumineux

    Science.gov (United States)

    Malo, Jean-Michel

    Every year, more than 200 000 tons of used residential roofing asphalt shingles are sent to landfills in Quebec. In order to reduce this amount, a research project funded by the 3RMCDQ and RECYC-QUÉBEC is ongoing at the LCMB at École de technologie supérieure (ÉTS) in Montreal. This project studies the feasibility of incorporating tear-off shingles particles in hot mix asphalt which could be used on Quebec roads. Currently, in Quebec, the ministry of Transportation (MTQ), allows the use of 5% of new asphalt shingles (factory reject) in the base course and 3% in the surface course, and tear-off shingles are not allowed. Incorporating new shingles particles is valued notably by the MTQ standardization for a reduction of binder in these mixes. As of now, the MTQ does not have a standard on the use of tear-off shingles, but the subject of experimental boards. The research done at ETS aim to characterize a standard base mix, GB20, and a standard surface mix, ESG-10, that contains tear-off shingles. Mixes containing different percentage of virgin binder were fabricated then tested on compaction capacity, on rutting resistance, on thermal cracking resistance (TSRST) and on complex modulus (E*). The amount of Virgin binder is calculated according to different percentage of effective binder from the shingles. This study has permitted to identify an optimal formula for both types of hot mix asphalt that were tested. Results show that for the standard ESG-10 surface mix, the possible contribution of tear-off asphalt shingles would be about 20%. For the standard GB-20 base mix, no reduction in the virgin binder may be considered for now when 5% of tear-off asphalt shingles are incorporated in the formula mix. In this case, further testing on complex modulus are recommended to obtain meaningful results that will determine if a reduction of the virgin binder would not be favorable.

  2. Oxidation hardening kinetics of the rheological function G'/('/G') in asphalts

    KAUST Repository

    Juristyarini, Pramitha

    2011-07-29

    The authors used 9 asphalts oxidized at various temperatures and pressures to determine the hardening kinetics for the DSR function, an easily measured and meaningful surrogate for 15C ductility that relates well to age-related binder deterioration. For each asphalt, there is a rapid initial period that slows to a constant rate period. This constant rate period can be represented by carbonyl formation (oxidation) rate times a hardening susceptibility (HS). For the DSR function and viscosity, the HS and initial jump were pressure-but not temperature-dependent. The DSR function initial jump was relatively higher than the viscosity initial jump. © 2011 Taylor & Francis Group, LLC.

  3. Road pavers' occupational exposure to asphalt containing waste plastic and tall oil pitch.

    Science.gov (United States)

    Väänänen, Virpi; Elovaara, Eivor; Nykyri, Erkki; Santonen, Tiina; Heikkilä, Pirjo

    2006-01-01

    Waste plastic (WP) and tall oil pitch (T), which are organic recycled industrial by-products, have been used as a binder with bitumen in stone mastic asphalt (SMA) and asphalt concrete (AC). We compared the exposure over one workday in 16 road pavers participating in a survey at four paving sites, using mixes of conventional asphalt (SMA, AC) or mixes containing waste material (SMA-WPT, AC-WPT). The concentrations of 11 aldehydes in air were 515 and 902 microg m(-3) at the SMA-WPT and AC-WPT worksites, being 3 and 13 times greater than at the corresponding worksites laying conventional asphalt. Resin acids (2-42 microg m(-3)), which are known sensitizers, were detected only during laying of AC-WPT. The emission levels (microg m(-3)) of total particulates (300-500), bitumen fumes (60-160), bitumen vapour (80-1120), naphthalene (0.59-1.2), phenanthrene (0.21-0.32), pyrene (<0.015-0.20), benzo(a)pyrene (<0.01) and the sum of 16 PAHs (polycyclic aromatic hydrocarbons, 1.28-2.00) were similar for conventional and WPT asphalts. The dermal deposition of 16 PAHs on exposure pads (on workers' wrist) was low in all pavers (0.7-3.5 ng cm(-2)). Eight OH-PAH biomarkers of naphthalene, phenanthrene and pyrene exposures were quantified in pre- and post-shift urine specimens. The post-shift concentrations (mean +/- SD, micromol mol(-1) creatinine) of 1- plus 2-naphthol; 1-,2-,3-,4- plus 9-phenanthrol; and 1-hydroxypyrene were, respectively, for asphalt workers: 18.1+/- 8.0, 2.41 +/- 0.71 and 0.66+/- 0.58 (smokers); 6.0+/- 2.3, 1.70+/- 0.72 and 0.27+/- 0.15 (non-smokers); WPT asphalt workers: 22.0+/- 9.2, 2.82+/- 1.11 and 0.76+/- 0.18 (smokers); 6.8+/- 2.6, 2.35+/- 0.69 and 0.46+/- 0.13 (non-smokers). The work-related uptake of PAHs was low in all pavers, although it was significantly greater in smokers than in non-smokers. The WPT asphalt workers complained of eye irritation and sore throat more than the pavers who had a much lower exposure to aldehydes and resin acids.

  4. Environmentally Friendly Cleaners for Removing Tar and Asphalt from Tactical and Transportation Vehicles

    Science.gov (United States)

    2011-05-01

    literature it appears that the best performing solvents all have an appreciable ability to dissolve asphalt and asphalt compounds. Both terpene -based...BioChem Systems (800) 777- 7870 3.46% Citrus King 115 NO Terpenes 30-60 90ºF $39.00 Citrus Depot (800) 424- 8045 3.16% BioAct MSO 117 NO 1-Methyl-4...that at least two broad categories of solvent blends ( terpene based solvents/esters, and blends of aliphatic hydrocarbons and esters assisted by

  5. Characterization of crumbe rubber and modified asphalt from brazilian petroleum; Caracterizacao de borracha de pneu moido e de asfalto modificado oriundo de petroleo brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Expedito F. dos; Feitosa, Judith P.A. [Ceara Univ., Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica]. E-mail: judith@dqoi.ufc.br, expeditoflavio@uol.com.br; Soares, Jorge B. [Ceara Univ., Fortaleza, CE (Brazil). Dept. de Engenharia de Transporte; Leite, Leni F.M. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2003-07-01

    Initially it was made an evaluation of the thermal behavior, grain composition and elastomer content of a crumb rubber sample. It was verified a thermal resistance of the crumb rubber and an elastomer content ranging from 56 to 68 %. The asphalt binders were obtained from Brazilian CAP (Fazenda Alegre, State of Espirito Santo) and blended with crumb rubber from 2 to 22 %. The asphalt binder presented smaller penetration than pure CAP. The pure asphalt and binder was aged by the RTFOT system. It was observed a C=O band due oxidation. In the asphalt binder with 2 and 5 % of crumb rubber was verified a smaller effect of the oxygen than in the pure asphalt, which suggests larger aging resistance. Apparent viscosity analysis showed that the pure asphalt has a Newtonian behavior in temperature higher than 150 deg C, while a pseudoplastic behavior of the asphalt binder increases with crumb rubber concentration. (author)

  6. TOR橡胶沥青流变性能试验%Experiments on rheological properties of TOR asphalt rubber

    Institute of Scientific and Technical Information of China (English)

    肖鹏; 吴美平; 周鑫

    2012-01-01

    为了得到TOR橡胶沥青的流变性能,对薄膜烘箱老化和压力老化试验后的沥青试样进行布氏黏度试验和动态剪切流变试验.给出了改性沥青的制备方法、试验方法,分析了TOR对橡胶沥青复数模量、相位角、车辙因子、黏度、疲劳因子的影响.结果表明:加入TOR后,沥青的复数模量增大,相位角减小,TOR促进了废胶粉颗粒与沥青的相容性,增加了沥青的高温抗车辙性能.薄膜加热老化后基质沥青、橡胶沥青和TOR橡胶沥青的车辙因子数值均增大,黏温敏感性增强,TOR橡胶沥青的抗车辙性能较橡胶沥青有所改善.加入TOR的橡胶沥青,经压力老化后抗疲劳性能得到了加强,在较低温度环境下比橡胶沥青好;经有水压力老化,可以有效改善橡胶沥青的热氧水老化能力.%In order to investigate rheological properties of TOR rubber asphalt, asphalts were determined by Brinell viscosity and dynamic shear rheometer (DSR) after film oven and pressure aging treatments. The preparation and test method of modified asphalt were proposed, and the influences of TOR on the asphalt rubber properties of complex modulus, phase angle, rut factor, viscosity and fatigue factor were analysed. The results show that the complex modulus is increased by adding TOR, but with decreased phase angle. TOR can promote the compatibility between waster rubber powder particles and asphalt with increased rutting resistance at high temperature. The rut factors of asphalt, asphalt rubber and TOR asphalt rubber are all increased after heat aging with increased viscosity-temperature sensitivity. Compared with asphalt rubber, TOR asphalt rubber has better rutting resistance in actual process. The fatigue resistance of TOR asphalt rubber is improved and better than that of asphalt rubber at low temperature after pressure aging. The resistance abilities of TOR asphalt rubber to heat, oxygen and water are effectively improved after pressure aging

  7. 沥青稳定碎石基层对沥青路面力学的特性影响分析%Asphalt Macadam Mechanical Properties of Asphalt Pavement Impact Analysis

    Institute of Scientific and Technical Information of China (English)

    陈勇军

    2012-01-01

    Asphalt stabilized gravel base course can significantly reduces the number of early damage to asphalt pavement. Through using three-dimensional finite element method, the mechanical performance of asphalt pavement structure added asphalt stabilized gravel base is analyzed, and stress and strain of asphalt pavement structure is also analyzed. Performance requirement of drainage base materials is proposed from the point of structural, and the structure design recommendation of semi-rigid base of the asphalt pavement added asphalt stabilized gravel base course is put forward.%沥青稳定碎石基层可以显著减少沥青路面一些早期损害,通过采用ABAQUS三维有限元方法,对设置沥青稳定碎石基层的沥青路面结构进行力学性能分析,分析路面结构应力和应变的影响.从结构角度提出对沥青稳定碎石基层材料的性能的要求,并且对设置排水基层的半刚性基层沥青路面结构设计提出相应建议.

  8. Integration of Field and Laboratory Spectral Data with Multi-Resolution Remote Sensed Imagery for Asphalt Surface Differentiation

    Directory of Open Access Journals (Sweden)

    Alessandro Mei

    2014-03-01

    Full Text Available The ability to classify asphalt surfaces is an important goal for the selection of suitable non-variant targets as pseudo-invariant targets during the calibration/validation of remotely-sensed images. In addition, the possibility to recognize different types of asphalt surfaces on the images can help optimize road network management. This paper presents a multi-resolution study to improve asphalt surface differentiation using field spectroradiometric data, laboratory analysis and remote sensing imagery. Multispectral Infrared and Visible Imaging Spectrometer (MIVIS airborne data and multispectral images, such as Quickbird and Ikonos, were used. From scatter plots obtained by field data using λ = 460 and 740 nm, referring to MIVIS Bands 2 and 16 and Quickbird and Ikonos Bands 1 and 4, pixels corresponding to asphalt covering were identified, and the slope of their interpolation lines, assumed as asphalt lines, was calculated. These slopes, used as threshold values in the Spectral Angle Mapper (SAM classifier, obtained an overall accuracy of 95% for Ikonos, 98% for Quickbird and 93% for MIVIS. Laboratory investigations confirm the existence of the asphalt line also for new asphalts, too.

  9. Road Performance of Drainage Asphalt Pavement%排水沥青路面的路用性能

    Institute of Scientific and Technical Information of China (English)

    连艳霞

    2014-01-01

    Drainage asphalt pavement has features such as drainage, anti-slip and noise reduction. It can greatly improve driving safety and reduce the incidence of traffic accidents. In order to study its road per-formance, contrast tests on road performance of mixtures with different types of gradation, different as-phalt as well as same gradation types, different asphalt are conducted. The result shows that polymer modi-fied asphalt has better high temperature performance and dynamic viscosity than asphalt A and drainage asphalt pavement has excellent road performance than OGFC asphalt mixture.%排水沥青路面具有排水、防滑和降噪等功能,可提高行车安全性,降低交通事故率。为研究其路用性能,通过进行不同级配类型、不同沥青和相同级配类型、不同沥青的混合料路用性能的对比试验,结果表明,聚合物复合改性沥青的高低温性能及动力黏度优于高黏沥青A,排水沥青路面混合料路用性能优于开级配OGFC混合料的路用性能。

  10. 天然岩沥青对沥青路用性能的影响研究%Research on Influences of Natural Rock Asphalt on Road Performances of Asphalt

    Institute of Scientific and Technical Information of China (English)

    林晓光; 金年生; 林立; 杨真子

    2015-01-01

    采用布敦岩沥青及国产青川岩沥青分别对基质沥青进行改性,应用动态剪切流变试验、低温弯曲梁流变试验及旋转薄膜老化试验,全面研究岩沥青类型及掺量对沥青的高温流变性能、低温流变性能和抗老化性等路用性能的影响。试验结果表明:岩沥青的掺加对基质沥青的路用性能具有良好的改善作用;对于不同类型岩沥青,沥青的高温流变性能均随着岩沥青掺量的不断增大而不断改善,低温流变性能则略有降低,抗老化性能不断增强;在相同岩沥青掺量条件下,国产青川岩沥青对沥青的高温性能、低温性能及抗老化性能等路用性能的改善效果均优于布敦岩沥青。%This paper modifies matrix asphalt by means of Buton Rock Asphalt and domestic Qingchuan natural rock asphalt,respectively,and thoroughly searches the influences of types and proportions of rock asphalt on road performances such as high -temperature rheological property, low -temperature rheological property and aging resistance,etc.by means of dynamic shear rheometer test,low -temperature bending beam rheological test and rotating thin film aging test.The test results show that mixture of rock asphalt can well improve road performance of matrix asphalt;for different types of rock asphalt,the high -temperature rheological property of asphalt is continuously improved with continuous increase of proportion of rock asphalt,while the low -temperature rheological property slightly decrease, and the aging resistance enhances continuously;under the condition of the same proportion of rock asphalt,domestic Qingchuan rock asphalt exhibits effect of improvement for road performance including high -temperature property,low -temperature property and aging resistance,etc.superior to Buton Rock Asphalt.

  11. Effect of Reclaimed Asphalt Pavement on the Properties of Asphalt Mixtures%RAP对再生沥青混合料马歇尔指标的影响

    Institute of Scientific and Technical Information of China (English)

    A.Hussain; 邱延峻

    2012-01-01

    An experimental study was presented to eveluate the effect of the types and percentages of RAP on the Marshall performance index of asphalt mixtures.Adopting two different virgin aggregates(Limestone and Quartzite)and two different RAP sources(Nowshera and Mandra),preparing the Hot Mixture Asphalt Marshall specimens respectively,testing the different RAP ratio(0% ~ 100%)and different types of asphalt mixture of air voids,asphalt saturation,voids of mineral aggregate,Marshall stability,flow value,density and other index.The results show that mixtures containing RAP showed high stability and the stability increased with the increase in RAP content.%研究了旧沥青混合料(RAP)的种类及掺量对再生沥青混合料马歇尔指标的影响.以2种新集料(石灰岩和石英岩)及2种旧沥青混合料(Nowshera和Mandra)制备的集料,分别配制成热拌沥青混合料(HMA)的马歇尔试件,测试了不同RAP掺量(0% ~100%)及不同RAP种类的沥青混合料的空隙率、沥青饱和度、矿料间隙率、马歇尔稳定度、流值及密度等指标.试验表明:含有RAP的混合料具有更高的稳定度值,且稳定度随着RAP含量的增加而增大.

  12. Three-dimensional modeling and simulation of asphalt concrete mixtures based on X-ray CT microstructure images

    Directory of Open Access Journals (Sweden)

    Hainian Wang

    2014-02-01

    Full Text Available X-ray CT (computed tomography was used to scan asphalt mixture specimen to obtain high resolution continuous cross-section images and the meso-structure. According to the theory of three-dimensional (3D reconstruction, the 3D reconstruction algorithm was investigated in this paper. The key to the reconstruction technique is the acquisition of the voxel positions and the relationship between the pixel element and node. Three-dimensional numerical model of asphalt mixture specimen was created by a self-developed program. A splitting test was conducted to predict the stress distributions of the asphalt mixture and verify the rationality of the 3D model.

  13. Asphalts tests using onshore drilling oil wells residues; Ensaios asfalticos utilizando residuos de perfuracao onshore

    Energy Technology Data Exchange (ETDEWEB)

    Lucena, Adriano Elisio de F.L.; Rodrigues, John Kennedy G.; Ferreira, Heber Carlos; Lucena, Leda Christiane de F.L. [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Lucena, Luciana de F.L. [Faculdade de Ciencias Sociais Aplicada (FACISA), Campina Grande, PB (Brazil)

    2008-07-01

    The drilling cuttings are one of the residues produced by the oils industries in large amounts during the drilling of oil wells. An alternative of final disposal of the drilling cutting residue is its utilization in asphalt mixtures. Based on this alternative, it was realized chemical and granulometric analysis and tests (Marshall and indirect tensile strength), on the asphaltic mixture using the residue from the oil drilling wells (well: 1-POTI-4-RN, located at Governador DIX-Sept Rosado - RN - Brazil). The achieved results to Marshall test indicated that for the analyzed mixture, the ideal content of residue that can be incorporated to the asphaltic composition and attend at the DNIT-ES 31 (2006) is 5%. To the indirect tensile strength test, the results showed a strength value higher than the minimum limit requested by the DNIT (0,65 MPa). The achieved results indicated the possibility of the utilization of the drilling cuttings in asphaltic pavements as fine aggregate, obeying the percentage limits, as an alternative to the final disposal. (author)

  14. Application of ultraviolet spectrophotometry to estimate occupational exposure to airborne polyaromatic compounds in asphalt pavers.

    Science.gov (United States)

    Buratti, Marina; Campo, Laura; Fustinoni, Silvia; Valla, Carla; Martinotti, Irene; Cirla, Piero E; Cavallo, Domenico; Foà, Vito

    2007-06-01

    An ultraviolet (UV) spectrophotometric procedure was devised for the determination of polycyclic aromatic compound-oriented organic soluble matter in vapors and particulate collected from emissions of hot asphalt mix. Ultrasonic extraction was carried out with acetonitrile, followed by UV measurements at 254 nm. Polycyclic aromatic compounds (PACs) in volatile and particulate fraction were quantified as phenanthrene or benzo[k]fluoranthene equivalents. A comparison between UV and high-pressure liquid chromatography with fluorescence detection showed that PACs were one to three orders of magnitude higher than the sum of 15 priority polycyclic aromatic hydrocarbons (PAHs); still, significant correlations were found between volatile or particulate PACs and, respectively, total volatile or particulate PAHs. Moreover, in the particulate phase, PACs correlated with total particulate matter quantified by gravimetry. The proposed procedure was employed in a field study for monitoring personal exposure to asphalt emissions of workers engaged in road construction. Observed levels of acetonitrile-soluble PACs in air samples were very low (2-20 microg/m3); however, asphalt pavers were exposed to significantly higher concentrations of volatile PACs than construction workers (geometric mean, 5.9 microg/m3 vs. 4.1 microg/m3). This method for estimating the global content of volatile or particulate PACs in air samples satisfies our requirements of simplicity and is suitable for conducting an initial screening to assess exposure to airborne polyaromatic organics in asphalt pavers.

  15. Aging of Asphalt Symposium, September 17th 2014, Delft, the Netherlands

    NARCIS (Netherlands)

    Erkens, S.M.J.G.; Scarpas, A.; Blab, R.; Glaser, R.; Glover, C.; Oeser, M.; Porot, L.; Soenen, H.

    2015-01-01

    Technical specifications for the asphalt concrete properties are developed to be able to specify mixtures that will perform well in pavement applications. Being able to identify and determine properties related to pavement performance in practice is crucial for both road authorities and contractors,

  16. Biodegradation of asphalt by Garciaella petrolearia TERIG02 for viscosity reduction of heavy oil.

    Science.gov (United States)

    Lavania, Meeta; Cheema, Simrita; Sarma, Priyangshu Manab; Mandal, Ajoy Kumar; Lal, Banwari

    2012-02-01

    Petroleum hydrocarbon is an important energy resource, but it is difficult to exploit due to the presence of dominated heavy constituents such as asphaltenes. In this study, viscosity reduction of Jodhpur heavy oil (2,637 cP at 50°C) has been carried out by the biodegradation of asphalt using a bacterial strain TERIG02. TERIG02 was isolated from sea buried oil pipeline known as Mumbai Uran trunk line (MUT) located on western coast of India and identified as Garciaella petrolearia by 16S rRNA full gene sequencing. TERIG02 showed 42% viscosity reduction when asphalt along with molasses was used as a sole carbon source compared to only asphalt (37%). The viscosity reduction by asphaltene degradation has been structurally characterized by Fourier transform infrared spectroscopy (FTIR). This strain also shows an additional preference to degrade toxic asphalt and aromatics compounds first unlike the other known strains. All these characteristics makes TERIG02 a potential candidate for enhanced oil recovery and a solution to degrading toxic aromatic compounds.

  17. NOx removal from vehicle emissions by functionality surface of asphalt road.

    Science.gov (United States)

    Chen, Meng; Liu, Yanhua

    2010-02-15

    This paper reported the potential of heterogeneous photocatalysis as an advanced oxidation technology for NO(x) removal from vehicle emissions by using TiO(2) as a photocatalyst immobilized on the surface of asphalt road. Based on asphalt road material porous characteristic, we utilized permeability technology to make asphalt nano-TiO(2) to be environmental protection materials. And then using scanning electron microscope, we observed the penetrating effect of TiO(2). The effect of surface friction, humidity and light intensity on NO(x) removal had been systematically investigated by the use of TiO(2) immobilized on the surface of asphalt road as photocatalytic environmental protection materials. In addition, the decontaminating effect was tested by contrast test in TiO(2) spraying section with non-spraying section, while the productions were used in road environment. Results of experiment revealed that decontaminating rate of the productions ranged from 6% to 12% this kind of photochemical catalysis environmental protection material has good environment purification function.

  18. Effects of Crumb Rubber Size and Concentration on Performance of Porous Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Altan Cetin

    2013-01-01

    Full Text Available The purpose of this study is to investigate the effect of size distribution and concentration of crumb rubber on the performance characteristics of porous asphalt mixture. The recycling of scrap tires in asphalt pavements appears as an important alternative providing a large-scale market. The characteristics of bitumen are very important with regard to service life of porous asphalt pavement. The experimental study consists of two main steps. Firstly, the mixture design was performed to determine the optimum bitumen content. In the latter step, the mixtures were modified by dry process using crumb rubber in three different grain size distributions of #4~#20, #20~#200, and #4~#200 and rubber content of 10%, 15%, and 20% as weight of optimum bitumen. The permeability, Cantabro abrasion loss, indirect tensile strength, moisture susceptibility, and resilient modulus tests were carried out on the specimens. Test results show that #20~#200 sized rubber particles reduced air voids and coefficient of permeability, while they increased the Cantabro abrasion loss. In general, increasing the crumb rubber size and content decreased the performance characteristics of the porous asphalt mixtures.

  19. APPLICATION OF PACKING THEORY ON GRADING DESIGN FOR POROUS ASPHALT MIXTURES

    Directory of Open Access Journals (Sweden)

    Hardiman Hardiman

    2004-01-01

    Full Text Available The design life of porous asphalt is shorter than dense mix as a consequence of permeability loss due to clogging and poor resistance to disintegration. To mitigate problems associated with clogging, double layer porous asphalt has been constructed in the Netherlands. This paper investigated a development of a new grading design for porous asphalt by varying percentage of aggregate with maximum sizes of 20, 14 and 10mm; a theory of packing was used. The most common method used for grading design is based on empirical, which does not relate the packing behaviour of the aggregate mass. The packing theory used in this study was facilitated by a vibratory compactor. It was found that mixtures containing aggregate sizes 14 and 10mm have a good permeability and stability, when vibrated for 65 second with a frequency of 40Hz, while for aggregates containing 20mm, to achieve the requirement for Marshall stability, the gradation needs to be modified. Properties of porous asphalt based on packing theory are better from the empirical grading from Spain (P-12.

  20. A Comparative Study on Properties of Malaysian Porous Asphalt Mixes with Different Bitumen Contents

    Directory of Open Access Journals (Sweden)

    Mohamad Yusri Aman

    2015-04-01

    Full Text Available Inadequate bitumen content in porous pavement construction may result in incomplete coating of aggregates which a thin bitumen film can oxidize rapidly resulting in premature failure of the pavement. This and presents the effects of porous asphalt prepared with 4.0% and up to 6.0% binder content with 0.5% increments binder. Bitumen penetration grade 60/70 and crushed granite were used in preparing the porous asphalt specimen. The porous asphalt mixes were compacted by applying 50 blows on each face using a Marshall Impact compactor. The specimens were tested for air voids, indirect tensile strength and water permeability and abrasion loss. The moisture sensitivity was assessed according to the AASHTO T283 procedures. The result shows that the increasing of bitumen content has decreased the, bulk density air voids, coefficient of permeability and abrasion loss values However, the Indirect Tensile Strength (ITS has significantly increased and this is a good indication to resistance against moisture sensitivity. It can be concluded that the increasing of bitumen content in porous asphalt has increased the thickness of binder coating around the aggregates. This results reduction in air voids and water permeability, on the other hands it increases resistance to disintegration and ITS value which give better resistance to moisture sensitivity of porous specimens.

  1. NO{sub x} removal from vehicle emissions by functionality surface of asphalt road

    Energy Technology Data Exchange (ETDEWEB)

    Chen Meng, E-mail: chenmeng623@126.com [College of Traffic, Northeast Forestry University, 26 Hexing Road, Harbin 150040 (China); Liu Yanhua, E-mail: liuyanhua815@126.com [College of Wildlife Resources, Northeast Forestry University, 26 Hexing Road, Harbin 150040 (China)

    2010-02-15

    This paper reported the potential of heterogeneous photocatalysis as an advanced oxidation technology for NO{sub x} removal from vehicle emissions by using TiO{sub 2} as a photocatalyst immobilized on the surface of asphalt road. Based on asphalt road material porous characteristic, we utilized permeability technology to make asphalt nano-TiO{sub 2} to be environmental protection materials. And then using scanning electron microscope, we observed the penetrating effect of TiO{sub 2}. The effect of surface friction, humidity and light intensity on NO{sub x} removal had been systematically investigated by the use of TiO{sub 2} immobilized on the surface of asphalt road as photocatalytic environmental protection materials. In addition, the decontaminating effect was tested by contrast test in TiO{sub 2} spraying section with non-spraying section, while the productions were used in road environment. Results of experiment revealed that decontaminating rate of the productions ranged from 6% to 12% this kind of photochemical catalysis environmental protection material has good environment purification function.

  2. Aging Influence on Fatigue Characteristics of RAC Mixtures Containing Warm Asphalt Additives

    Directory of Open Access Journals (Sweden)

    Feipeng Xiao

    2010-01-01

    Full Text Available Aging is an important factor to affect the long-term performance of asphalt pavement. The fatigue life of a typical warm mix asphalt (WMA is generally related to various factors of rheological and mechanical properties of the mixture. The study of the fatigue behavior of the specific rubberized WMA is helpful in recycling the scrap tires and saving energy in terms of the conventional laboratory aging process. This study explores the utilization of the conventional fatigue analysis approach in investigating the cumulative dissipated, stiffness, and fatigue life of rubberized asphalt concrete mixtures containing the WMA additive after a long-term aging process. The aged beams were made with one rubber type (−40 mesh ambient crumb rubber, two aggregate sources, two WMA additives (Asphamin and Sasobit, and tested at 5 and 20ºC. A total of 55 aged fatigue beams were tested in this study. The test results indicated that the addition of crumb rubber extends the fatigue resistance of asphalt binder while WMA additive exhibits a negative effect. The study indicated that the WMA additive generally has an important influence on fatigue life. In addition, test temperature and aggregate source play an important role in determining the cumulative dissipated energy, stiffness, and fatigue life of an aged mixture.

  3. COMPARISON BETWEEN ASPHALTENES (SUBFRACTIONS EXTRACTED FROM TWO DIFFERENT ASPHALTIC RESIDUES: CHEMICAL CHARACTERIZATION AND PHASE BEHAVIOR

    Directory of Open Access Journals (Sweden)

    Silas R. Ferreira

    2016-01-01

    Full Text Available Asphaltenes are blamed for various problems in the petroleum industry, especially formation of solid deposits and stabilization of water-in-oil emulsions. Many studies have been conducted to characterize chemical structures of asphaltenes and assess their phase behavior in crude oil or in model-systems of asphaltenes extracted from oil or asphaltic residues from refineries. However, due to the diversity and complexity of these structures, there is still much to be investigated. In this study, asphaltene (subfractions were extracted from an asphaltic residue (AR02, characterized by NMR, elemental analysis, X-ray fluorescence and MS-TOF, and compared to asphaltene subfractions obtained from another asphaltic residue (AR01 described in a previous article. The (subfractions obtained from the two residues were used to prepare model-systems containing 1 wt% of asphaltenes in toluene and their phase behavior was evaluated by measuring asphaltene precipitation onset using optical microscopy. The results obtained indicated minor differences between the asphaltene fractions obtained from the asphaltic residues of distinct origins, with respect to aromaticity, elemental composition (CHN, presence and content of heteroelements and average molar mass. Regarding stability, minor differences in molecule polarity appear to promote major differences in the phase behavior of each of the asphaltene fractions isolated.

  4. Corals from asphalt deposits of the island Buton (East-Indies)

    NARCIS (Netherlands)

    Umbgrove, J.H.P.

    1942-01-01

    In 1933 and 1935 K. Martin described a new fauna of tertiary Mollusca from asphalt deposits of Buton 1). The collection, consisting of 35 species, shows very characteristic forms, but not a single species is known from recent, pliocene, miocene or eocene deposits. There are some affinities to miocen

  5. Statistical Evaluation of Non-Agglomerating Coating for Granulated Natural Asphalt

    Directory of Open Access Journals (Sweden)

    Tjokorde Walmiki Samadhi

    2011-04-01

    Full Text Available Agglomeration of granulated Buton natural asphalt during storage is of major concern in its large-scale commercial application. This work develops a simple test method to evaluate the performance of agglomeration-resistant coating for granulated Buton asphalt, consisting of water-based polymeric primary coating and mineral-based secondary coating. The method uses a static load cell to measure the agglomerated granule count fraction under simulated storage conditions. A 24-1 fractional factorial experiment with two replications is employed to evaluate the effect of coating drying temperature, drying time, asphalt to secondary coating mass ratio, and secondary coating type on the agglomerated count fraction at ambient temperature and 60 oC. The test is able to measure a statistically significant increase in agglomeration resistance when the coating is applied, with an agglomerated fraction of 17.5% at 60 oC. The test identifies asphalt to secondary coating weight ratio as a significant factor, with an ANOVA p-value much lower than other effects. A decrease in this mass ratio from 5:1 to 5:2 increases the agglomeration, which is hypothesized to be attributed to the hydrated cementitious phase between granular external surfaces. More work is needed to identify the acceptable fraction of agglomerated granules.

  6. Chemomechanics of Damage Accumulation and Damage-Recovery Healing in Bituminous Asphalt Binders

    NARCIS (Netherlands)

    Pauli, A.T.

    2014-01-01

    As a contribution to the development of mutli-scale multi-physics approaches to modelling pavement performance, the present thesis considers the topic of damage accumulation accompanied by damage recover self-healing of the bituminous asphalt phase of pavement systems. It is found insightful that b

  7. Reducing the environmental impact of concrete and asphalt: a scenario approach

    NARCIS (Netherlands)

    Blankendaal, T.; Schuur, P.C.; Voordijk, J.T.

    2014-01-01

    In this paper, measures are evaluated to reduce the environmental impact of concrete and asphalt. Several composition scenarios are designed for these materials and are evaluated based on their environmental performance using life-cycle assessment (LCA). The effect of low-energy production technique

  8. Damage development in the adhesive zone and mortar of porous asphalt concrete

    NARCIS (Netherlands)

    Mo, L.T.

    2010-01-01

    This research is focused on damage development in the adhesive zone and the mortar of porous asphalt concrete. The motive of this research is the loss of stone from the pavement surface, the so-called ravelling of noise reducing surface wearing courses. Ravelling is the dominant defect of porous asp

  9. Intravascular haemolysis during prolonged running on asphalt and natural grass in long and middle distance runners.

    Science.gov (United States)

    Janakiraman, Kamal; Shenoy, Shweta; Sandhu, Jaspal Singh

    2011-09-01

    Surface features such as uneven playing surfaces, low impact absorption capacity and inappropriate friction/traction characteristics are connected with injury prevalence whereas force impact during foot strike has been suggested to be an important mechanism of intravascular haemolysis during running. We aimed to evaluate intravascular haemolysis during running and compare the effect of running on two different types of surfaces on haemolysis. We selected two surfaces (asphalt and grass) on which these athletes usually run. Participants were randomly assigned to group A (asphalt) or group B (grass) with 10 athletes in each group. Each athlete completed one hour of running at the calculated target heart rate (60-70%). Venous blood samples were collected before and immediately after running. We measured unconjugated bilirubin (UBR) (mg · dl(-1)), lactate dehydrogenase (LDH) (μ · ml(-1)), haemoglobin (g · l(-1)) and serum ferritin (ng · ml(-1)) as indicators of haemolysis. Athletes who ran on grass demonstrated an increase in the haematological parameters (UBR: P asphalt (UBR: P asphalt road.

  10. On the combined effect of moisture diffusion and cyclic pore pressure generation in asphalt concrete

    NARCIS (Netherlands)

    Varveri, A.; Scarpas, A.; Collop, A.; Erkens, S.M.J.G.

    2014-01-01

    In this paper, a new moisture conditioning protocol which attempts to distinguish the contributions of long- and short-term moisture damage, i.e. moisture diffusion and cyclic pore pressure generation, in asphalt mixtures is presented. The capability of the proposed protocol to rank various aspha

  11. Potential impact of climate change on porous asphalt with a focus on winter damage

    NARCIS (Netherlands)

    Kwiatkowski, K.P.; Stipanovic Oslakovic, I.; Hartmann, A.; Maat, ter H.W.

    2016-01-01

    This chapter investigates the impact and adaptation options of climate change on porous asphalt
    (PA) roads, specifically for the case of winter weather (freeze–thaw cycles) and road damage in
    the Netherlands. Changes in weather patterns pose a threat to the serviceability and long-term
    p

  12. Characterization of long term field aging of polymer modified bitumen in porous asphalt

    NARCIS (Netherlands)

    Vliet, D. van; Erkens, S.; Leegwater, G.A.

    2012-01-01

    The effect of long term field aging on different types of polymer modified binders used in two-layer porous asphalt is studied using different test methods. Chemical and rheological tests are performed on samples taken from road sections at different moments in time in search of trends in long term

  13. Self-monitoring electrically conductive asphalt-based composite containing carbon fillers

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; LIU Xiao-ming; YE Qun-shan; LI Ning

    2006-01-01

    A new novel function materials,structure self-monitoring asphalt-based composite was introduced. The results show that the output resistance of electrically conductive asphalt-based composites would change under cyclic loading and vehicle loading action. The resistance change of conductive asphalt-based composites was aroused by the variation of its interior structure. When the fatigue failure was studied,the larger cracks cut the continuous electrically conductive path and the electron is difficult to overcome the potential barrier of gap. In the early period,the slight deformation and microcrack may be recovered due to the viscoelasticity character of asphalt,which leads to some cracks close again,the output resistance changes a little. But with the shear process performs continuously,the cracks become larger and larger,which would cut the conductive path and block off the transition of electrons,and if the cracks are large enough,the pitch-matrix composites containing carbon fillers will lose electrically conductive function. When the rutting failure was studied,the flowage of conductive substance results in the decrease of substance due to electrically conducting and conductive path decreasing. The decrease of electron volume contribute to electrically conducting and large stone aggregate prevent the electron from transiting. In a word,the variation of output resistance is aroused by the variation of interior structure completely.

  14. Development of an autonomous setup for evaluating self healing capability of asphalt mixtures

    NARCIS (Netherlands)

    Qiu, J.; Molenaar, A.A.A.; Van de Ven, M.F.C.; Wu, S.

    2012-01-01

    It is a well known fact that asphalt mixtures have self healing capabilities. Yet most of the self healing investigations are carried out using complex and time consuming fatigue tests. In order to investigate the self healing capability in a simple and efficient manner, a beam on elastic foundation

  15. Strain transfer analysis of optical fiber based sensors embedded in an asphalt pavement structure

    Science.gov (United States)

    Wang, Huaping; Xiang, Ping

    2016-07-01

    Asphalt pavement is vulnerable to random damage, such as cracking and rutting, which can be proactively identified by distributed optical fiber sensing technology. However, due to the material nature of optical fibers, a bare fiber is apt to be damaged during the construction process of pavements. Thus, a protective layer is needed for this application. Unfortunately, part of the strain of the host material is absorbed by the protective layer when transferring the strain to the sensing fiber. To account for the strain transfer error, in this paper a theoretical analysis of the strain transfer of a three-layered general model has been carried out by introducing Goodman’s hypothesis to describe the interfacial shear stress relationship. The model considers the viscoelastic behavior of the host material and protective layer. The effects of one crack in the host material and the sensing length on strain transfer relationship are been discussed. To validate the effectiveness of the strain transfer analysis, a flexible asphalt-mastic packaged distributed optical fiber sensor was designed and tested in a laboratory environment to monitor the distributed strain and appearance of cracks in an asphalt concrete beam at two different temperatures. The experimental results indicated that the developed strain transfer formula can significantly reduce the strain transfer error, and that the asphalt-mastic packaged optical fiber sensor can successfully monitor the distributed strain and identify local cracks.

  16. Analysis of the dispersion of air pollutants from a factory Asphalt in Nuevo Vallarta, Nay., Mex

    Science.gov (United States)

    Carrillo-Gonzalez, F. M.; Gaitán-Rodríguez, M.; Cornejo-López, V. M.; Morales-Hernández, J. C.

    2013-12-01

    An asphalt factory has operated intermittently near the urban area of Nuevo Vallarta on Banderas Bay, Nayarit, Mex. This factory has emissions that can affect the health of people living in the colonies nearest are Valle Dorado and San Vicente. The dispersion of emissions depends on the wind (sea breeze-land breeze) and the roof of the inversion, these phenomena determined by the density and temperature of the lower layers of the atmosphere. Asphalts are dark colored binder materials, formed by a complex non-volatile hydrocarbon chains and high molecular weight. Asphalts are produced from petroleum, but by a process of evaporation of the volatiles, leaving the asphalt alone. Therefore, the material emitted by the fireplace are mainly low molecular weight hydrocarbons known as polycyclic aromatic hydrocarbons (PAHs). The Emergency Response Guide 2008 developed by various agencies in Canada, U.S. and Mexico mentions that the hydrocarbon gas can have health effects. Animal studies have shown that PAHs can cause harmful effects to the skin, body fluids and some PAHs are carcinogenic. An analysis of the wind field, monthly and seasonal averages for the years 2010 and 2011, recorded in AWS administered by the CEMCO and other stations located near the study area.

  17. Development of the Asphalt Multi-Integrated Roller Field and Experimental Studies

    Directory of Open Access Journals (Sweden)

    Abd El Halim Omar Abd El Halim

    2015-01-01

    Full Text Available Asphalt pavements have been compacted using steel drum rollers for a century. However, the problems that are observed today on these pavements are universal with no solution in sight. Intensive research work has been invested to identify the mechanisms that cause these problems. A recent development was the introduction of SuperPave mix design, GP asphalt cements, and the use of reinforcing elements ranging from polymer to steel bars. Yet it seems that none of these solutions have succeeded in eliminating any of the old problems. The pavements suffer from serious distresses regardless of the geographic location of the pavements and its design, materials, traffic loads, and climate condition. This paper presents a new approach to deal with the problems facing the asphalt pavements. While the research efforts to date concentrated on materials-related solutions, this paper identifies conventional compaction equipment as the cause of many problems observed on the pavements. The paper provides the development of the new Asphalt Multi-Integrated Roller, AMIR, and discusses new developments leading to a number of commercial field trials on several Ontario highways. The paper concludes that current compactors must be replaced with soft flat plates in order to achieve the required specifications for long term performance.

  18. Mortality from obstructive lung diseases and exposure to polycyclic aromatic hydrocarbons among asphalt workers

    Energy Technology Data Exchange (ETDEWEB)

    Burstyn, I.; Boffetta, P.; Heederik, D.; Partanen, T.; Kromhout, H.; Svane, O.; Langard, S.; Frentzel-Beyme, R.; Kauppinen, T.; Stucker, I.; Shaham, J.; Ahrens, W.; Cenee, S.; Ferro, G.; Heikkila, P.; Hooiveld, M.; Johansen, C.; Randem, B.G.; Schill, W. [University of Utrecht, Utrecht (Netherlands)

    2003-09-01

    Work in the asphalt industry has been associated with nonmalignant respiratory morbidity and mortality, but the evidence is not consistent. A historical cohort of asphalt workers included 58,862 men (911,209 person-years) first employed between 1913 and 1999 in companies applying and mixing asphalt in Denmark, Finland, France, Germany, Israel, the Netherlands, and Norway. The relations between mortality from nonmalignant respiratory diseases (including the obstructive lung diseases: chronic bronchitis, emphysema, and asthma) and specific chemical agents and mixtures were evaluated using a study-specific exposure matrix. Mortality from obstructive lung diseases was associated with the estimated cumulative and average exposures to polycyclic aromatic hydrocarbons and coal tar (p values of the test for linear trend=0.06 and 0.01, respectively). The positive association between bitumen fume exposure and mortality from obstructive lung diseases was weak and not statistically significant; confounding by simultaneous exposure to coal tar could not be excluded. The authors lacked data on smoking and full occupational histories. In conclusion, exposures to polycyclic aromatic hydrocarbons, originating from coal tar and possibly from bitumen fume, may have contributed to mortality from obstructive lung diseases among asphalt workers, but confounding and bias cannot be ruled out as an explanation for the observed associations.

  19. Self Healing of Asphalt Mixtures: Towards a Better Understanding of the Mechanism

    NARCIS (Netherlands)

    Qiu, J.

    2012-01-01

    Traffic is increasing rapidly in terms of number of vehicles and also in axle loads. In order to maximize the availability of the pavement and to minimize hindrances to traffic because of maintenance works, long life pavements are needed. An asphalt pavement with self repairing capabilities is belie

  20. Toxicity of coal-tar and asphalt sealants to eastern newts, Notophthalmus viridescens.

    Science.gov (United States)

    Bommarito, Thomas; Sparling, Donald W; Halbrook, Richard S

    2010-09-01

    Between 1970 and 2000 the concentration of total polycyclic aromatic hydrocarbons (TPAH) in several lakes across the country increased whereas those of other persistent organic pollutants (POPs) tended to remain stable or declined. Urbanized watersheds experienced greater rises in TPAH concentration compared to non-urban lakes. Sources for urban PAHs include industrial wastes, vehicular exhausts and oil leaks and sealants from pavement surfaces. Both coal-tar and asphalt sealants are used to protect surfaces but runoff from surfaces coated with coal-tar can have mean concentrations of 3500 mg TPAHs kg(-1), much higher than runoff from asphalt-sealed or cement surfaces. Unaltered parent compounds of PAHs can have many lethal and sublethal toxic effects, but oxidation and UV radiation can alter the toxicity of these compounds, sometimes creating degradates that are many times more toxic than parent compounds. The purposes of this study were to determine if coal-tar sealants can be toxic to adult eastern newts (Notophthalmus viridescens) and to compare the toxicity of coal-tar sealant to that of asphalt sealant. Newts were exposed to sediments containing dried sealants ranging from 0 mg kg(-1) to 1500 mg kg(-1) under simultaneous exposure to UV radiation and visible light to determine concentration/response relationships. No significant mortality occurred with any treatment. Significant effects due to sealants included decreased righting ability and diminished liver enzyme activities. Coal-tar sealant was more effective in inducing these changes than was asphalt sealant.

  1. Permeable Asphalt: A New Tool to Reduce Road Salt Contamination of Groundwater in Urban Areas.

    Science.gov (United States)

    Dietz, Michael E; Angel, Derek R; Robbins, Gary A; McNaboe, Lukas A

    2016-08-30

    Chloride contamination of groundwater in urban areas due to deicing is a well-documented phenomenon in northern climates. The objective of this study was to evaluate the effects of permeable pavement on degraded urban groundwater. Although low impact development practices have been shown to improve stormwater quality, no infiltration practice has been found to prevent road salt chlorides from entering groundwater. The few studies that have investigated chlorides in permeable asphalt have involved sampling directly beneath the asphalt; no research has looked more broadly at surrounding groundwater conditions. Monitoring wells were installed upgradient and downgradient of an 860 m(2) permeable asphalt parking lot at the University of Connecticut (Storrs, Connecticut). Water level and specific conductance were measured continuously, and biweekly samples were analyzed for chloride. Samples were also analyzed for sodium (Na), calcium (Ca), and magnesium (Mg). Analysis of variance analysis indicated a significantly (p asphalt in impacted urban environments with high ambient chloride concentrations can be beneficial to shallow groundwater quality, although these results may not be generalizable to areas with low ambient chloride concentrations.

  2. Influence of asphalt on fatigue crack monitoring in steel bridge decks using guided waves

    NARCIS (Netherlands)

    Pahlavan, P.L.; De Soares Silva e Melo Mota, M.; Blacquière, G.

    2016-01-01

    Asphalt materials generally exhibit temperature-dependent properties, which can influence the performance of fatigue crack inspection and monitoring systems for bridge deck structures. For a non-intrusive fatigue crack sizing methodology applied to steel decks using ultrasonic guided waves, the effe

  3. Maintenance of Vinyl Asbestos and Asphalt Tile Floors in Institutional, Industrial and Commercial Buildings.

    Science.gov (United States)

    Asphalt and Vinyl Asbestos Tile Inst., New York, NY.

    The claim is made that proper planning and modest outlays of time, labor, and material costs can provide and maintain a high appearance level for floors in institutional, commercial, and industrial buildings. Instructions for four basic steps in maintaining the good looks of vinyl asbestos and asphalt tile floors are treated in the booklet--(1)…

  4. Experimental testing of hot mix asphalt mixture made of recycled aggregates.

    Science.gov (United States)

    Rafi, Muhammad Masood; Qadir, Adnan; Siddiqui, Salman Hameed

    2011-12-01

    The migration of population towards big cities generates rapid construction activities. These activities not only put pressure on natural resources but also produce construction, renovation and demolition waste. There is an urgent need to find out ways to handle this waste owing to growing environmental concerns. This can reduce pressure on natural resources as well. This paper presents the results of experimental studies which were carried out on hot mix asphalt mixture samples. These samples were manufactured by adding recycled aggregates (RA) with natural crushed stone aggregates (CSA). Three levels of addition of RA were considered in the presented studies. RA were obtained from both the concrete waste of construction, renovation and demolition activities and reclaimed asphalt pavement. Separate samples were manufactured with the coarse and fine aggregate fractions of both types of RA. Samples made with CSA were used as control specimens. The samples were prepared and tested using the Marshall method. The performance of the samples was investigated in terms of density-void and stability/flow analysis and was compared with the performance criteria as given by National Highway Authority for wearing course material in Pakistan. Based on this data optimum asphalt contents were determined. All the samples made by adding up to 50% RA conform to the specification requirements of wearing course material as given by National Highway Authority in terms of optimum asphalt contents, voids in mineral aggregates and stability/flow. A statistical analysis of variation of these samples confirmed that addition is also possible statistically.

  5. Paving asphalt products exhibit a lack of carcinogenic and mutagenic activity.

    Science.gov (United States)

    Goyak, Katy O; McKee, Richard H; Minsavage, Gary D; McGowan, Claude; Daughtrey, Wayne C; Freeman, James J

    2011-10-01

    A paving asphalt and a vacuum residuum (derived from crude oil by atmospheric and subsequent vacuum distillation and used as a blend stock for asphalt) were tested in skin carcinogenesis assays in mice and in optimized Ames assays for mutagenic activity. In the skin cancer tests, each substance was applied twice weekly for 104 weeks to the clipped backs of groups of 50 male C3H mice. Neither the paving asphalt nor the vacuum residuum (30% weight/volume and 75% weight/weight in US Pharmacopeia mineral oil, respectively) produced any tumors. The positive control benzo[a]pyrene (0.05% w/v in toluene) induced tumors in 46 of 50 mice, demonstrating the effectiveness of the test method. Salmonella typhimurium tester strain TA98 was used in the optimized Ames assay to evaluate mutagenic potential. Dimethylsulfoxide (DMSO) extractions of the substances were not mutagenic when tested up to toxic limits. Thus, under the conditions of these studies, neither the paving asphalt nor the vacuum residuum was carcinogenic or mutagenic.

  6. Evaluation of the rheological behavior of asphaltic binder modified with zeolite material

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, E.M. da; Sant' ana, Hosiberto B.; Soares, Sandra A.; Soares, Jorge B. [Federal University of Ceara, Fortaleza, CE (Brazil)

    2008-07-01

    Several new processes have been developed to reduce mixing and compaction temperatures of hot mix asphalt without sacrificing the quality of the resulting pavement. One of these processes utilizes the zeolite, a crystalline hydrated aluminum silicate. A laboratory study was conducted to determine the applicability of zeolite to improve the rheological and chemical behavior of an asphaltic binder. The synthetic asphaltic binder was produced with different zeolite contents (0,1; 0.3; and 0.5% w/w) by wet process. The rheological and chemical behavior was verified by Dynamic Shear Rheometer and Infrared Spectroscopy, respectively. The zeolite's chemical composition and morphology was studied by Dispersive X-ray Spectroscopy (EDX). Additionally, the scanning electron microscope (SEM) was utilized to establish the zeolite elemental composition. The results showed that investigated zeolite was classified as a sodium aluminum silicate and it was able to modify the rheological properties of the neat asphalt binder. The G*/sin{delta} parameter was affected by the zeolite presence, indicating better performance for the binders with zeolite. The results show that synthetic binders can partly replicate the rheological properties of conventional AB. Comparable complex modulus values was obtained. No significant difference was found in viscoelastic response, given by the phase angles as a function of both temperature and frequency. (author)

  7. Impact of Freeze-Thaw Cycles on Compressive Characteristics of Asphalt Mixture in Cold Regions

    Institute of Scientific and Technical Information of China (English)

    SI Wei; LI Ning; MA Biao; REN Junping; WANG Hainian; HU Jian

    2015-01-01

    Low average temperature, large temperature difference and continual freeze-thaw (F-T) cycles have signiifcant impacts on mechanical property of asphalt pavement. F-T cycles test was applied to illustrate the mixtures’ compressive characteristics. Exponential model was applied to analyze the variation of compressive characteristics with F-T cycles; Loss ratio model and Logistic model were used to present the deterioration trend with the increase of F-T cycles. ANOVA was applied to show the signiifcant impact of F-T cycles and asphalt-aggregate ratio. The experiment results show that the compressive strength and resilient modulus decline with increasing F-T cycles; the degradation is sharp during the initial F-T cycles, after 8 F-T cycles it turns to gentle. ANOVA results show that F-T cycles, and asphalt-aggregate ratio have signiifcant inlfuence on the compressive characteristics. Exponential model, Loss ratio model and Logistic model are signiifcantly iftting the test data from statistics view. These models well relfect the compressive characteristics of asphalt mixture degradation trend with increasing F-T cycles.

  8. Asphalt modified with nonmetals separated from pulverized waste printed circuit boards.

    Science.gov (United States)

    Guo, Jiuyong; Guo, Jie; Wang, Shifeng; Xu, Zhenming

    2009-01-15

    Nonmetals separated from pulverized waste printed circuit boards (PCBs) were reused as a new modifier to improve the performance of asphalt. The classical and rheological properties of unmodified asphalt and non-metal-modified asphalt (NMA) were determined. Specifically, the influence of nonmetals content and particle size on these properties has been studied. When the nonmetals content was 25 wt% and the particle size group was 0.07-0.09 mm, the NMA had a viscosity of 1225 cP at 135 degrees C, a penetration of 53.7 dmm at 15 degrees C, a ring and ball softening point of 54 degrees C, a ductility of 43.5 cm at 15 degrees C, a G*/sin delta of 3995.27 Pa at 60 degrees C, and an upper limit temperature (G*/sin delta = 1 kPa) of 69.4 degrees C, all of which showed that the high temperature performance of asphalt was improved significantly. Therefore, this study gives a fundamental understanding of NMA and represents a novel attempt to deal with the fast increasing quantities of nonmetals from waste PCBs, which is significant from an environmental and economic standpoint.

  9. Modeling of asphalt durability and self-healing with discrete particles method

    NARCIS (Netherlands)

    Magnanimo, V.; Huerne, ter H.L.; Luding, S.; Beuving, E.; Dewez, P.; Malkoc, G.; Southern, M.

    2012-01-01

    Asphalt is an important road paving material. Besides an acceptable price, durability, surface conditions (like roughening and evenness), age-, weather- and traffic-induced failures and degradation are relevant aspects. In the professional road-engineering branch empirical models are used to describ

  10. Attenuation of foot pressure during running on four different surfaces: asphalt, concrete, rubber, and natural grass.

    Science.gov (United States)

    Tessutti, Vitor; Ribeiro, Ana Paula; Trombini-Souza, Francis; Sacco, Isabel C N

    2012-01-01

    The practice of running has consistently increased worldwide, and with it, related lower limb injuries. The type of running surface has been associated with running injury etiology, in addition other factors, such as the relationship between the amount and intensity of training. There is still controversy in the literature regarding the biomechanical effects of different types of running surfaces on foot-floor interaction. The aim of this study was to investigate the influence of running on asphalt, concrete, natural grass, and rubber on in-shoe pressure patterns in adult recreational runners. Forty-seven adult recreational runners ran twice for 40 m on all four different surfaces at 12 ± 5% km · h(-1). Peak pressure, pressure-time integral, and contact time were recorded by Pedar X insoles. Asphalt and concrete were similar for all plantar variables and pressure zones. Running on grass produced peak pressures 9.3% to 16.6% lower (P rubber was greater than on concrete for the rearfoot and midfoot. The behaviour of rubber was similar to that obtained for the rigid surfaces - concrete and asphalt - possibly because of its time of usage (five years). Running on natural grass attenuates in-shoe plantar pressures in recreational runners. If a runner controls the amount and intensity of practice, running on grass may reduce the total stress on the musculoskeletal system compared with the total musculoskeletal stress when running on more rigid surfaces, such as asphalt and concrete.

  11. Toxicity of coal-tar and asphalt sealants to eastern newts, Notophthalmus viridescens

    Energy Technology Data Exchange (ETDEWEB)

    Bommarito, T.; Sparling, D.W.; Halbrook, R.S. [South Illinois University, Carbondale, IL (United States). Cooperative Wildlife Research Laboratory

    2010-09-15

    Between 1970 and 2000 the concentration of total polycyclic aromatic hydrocarbons (TPAH) in several lakes across the country increased whereas those of other persistent organic pollutants (POPs) tended to remain stable or declined. Urbanized watersheds experienced greater rises in TPAH concentration compared to non-urban lakes. Sources for urban PAHs include industrial wastes, vehicular exhausts and oil leaks and sealants from pavement surfaces. Both coal-tar and asphalt sealants are used to protect surfaces but runoff from surfaces coated with coal-tar can have mean concentrations of 3500 mg TPAHs kg{sup -1}, much higher than runoff from asphalt-sealed or cement surfaces. Unaltered parent compounds of PAHs can have many lethal and sublethal toxic effects, but oxidation and UV radiation can alter the toxicity of these compounds, sometimes creating degradates that are many times more toxic than parent compounds. The purposes of this study were to determine if coal-tar sealants can be toxic to adult eastern newts (Notophthalmus viridescens) and to compare the toxicity of coal-tar sealant to that of asphalt sealant. Newts were exposed to sediments containing dried sealants ranging from 0 mg kg{sup -1} to 1500 mg kg{sup -1} under simultaneous exposure to UV radiation and visible light to determine concentration/response relationships. No significant mortality occurred with any treatment. Significant effects due to sealants included decreased righting ability and diminished liver enzyme activities. Coal-tar sealant was more effective in inducing these changes than was asphalt sealant.

  12. Modeling of combined physical-mechanical moisture induced damage in asphaltic mixes

    NARCIS (Netherlands)

    Kringos, N.

    2007-01-01

    Moisture induced damage in asphaltic mixes is recognized as a major issue, resulting to the need for frequent maintenance operations. This does not only imply high maintenance costs, but also temporary closure of traffic and hence increased road congestion. Given the high costs for the road authorit

  13. Gaps in scientific knowledge about the carcinogenic potential of asphalt/bitumen fumes.

    Science.gov (United States)

    Schulte, Paul A

    2007-01-01

    Despite a relatively large body of published research, the potential carcinogenicity of asphalt/bitumen fumes is still a vexing question. Various uncertainties and gaps in scientific knowledge need to be addressed. These include uncertainties in chemistry, animal studies, and human studies. The chemistry of asphalt/bitumen fumes is complex and varies according to the source of the crude oil and the application parameters. The epidemiological studies, while showing weak evidence of lung cancer, are inconsistent and many confounding factors have not been addressed. Studies of animal exposure are also inconsistent regarding laboratory and field-generated fumes. There is a need for further human studies that address potential confounding factors such as smoking, diet, coal tar, and diesel exposures. Animal inhalation studies need to be conducted with asphalt/bitumen fumes that are chemically representative of roofing and paving fumes. Underlying all of this is the need for continued characterization of fumes so their use in animal and field studies can be properly assessed. Nonetheless, uncertainties such as these should not preclude appropriate public health actions to protect workers in the even that asphalt fumes are found to be a carcinogenic hazard.

  14. Laboratory research on rheological behavior and characterization of ultraviolet aged asphalt

    Institute of Scientific and Technical Information of China (English)

    吴少鹏; 朱国军; 陈筝; 刘至飞

    2008-01-01

    The influence of aging on the evolution of structural,morphological and rheological properties of neat asphalt was investigated by Fourier transform infrared(FTIR),atomic force microscopy(AFM) and dynamic shear rheometer(DSR),respectively.Asphalt was suffered under 20 W/m2 of UV radiant intensity and under the condition of aging time(0,48,96 and 144 h) with film thickness of 100 μm and film thickness of 50,100,200 and 500 μm after aging for 120 h,respectively,at certain UV radiant intensity 20 W/m2.Rheological results tested by DSR exhibit higher the complex shear(stiffness) modulus(G*) and lower phase angle(δ),compared to the virgin at the same test condition.The compositions analysis of asphalt before and after aging show an increase of carbonyl and sulfoxides,while a decrease of aromatic functional groups.With the increase of the component of asphaltene,obvious agglomerates of asphalten appear in neat asphalt surfaces after aging.

  15. Determining the healing potential of asphalt concrete mixtures--a pragmatic approach

    NARCIS (Netherlands)

    Erkens, S.; Vliet, D. van; Dommelen, A. van; Leegwater, G.A.

    2012-01-01

    Most design methods for pavements use a factor explaining the difference between pavement life predictions from design models and performance in the road [1]. Part of this correction factor is healing, the natural capacity of asphalt concrete to recover in rest periods, which generally are not prese

  16. Asphalt Mixture Fatigue Testing: Influence of Test Type and Specimen Size

    NARCIS (Netherlands)

    Li, N.

    2013-01-01

    Fatigue characterization of an asphalt mixture is commonly estimated by laboratory fatigue tests. Based on the classical fatigue analysis, fatigue lives obtained from different test devices are not comparable even when they are performed at the same test conditions. It is believed that there are tw

  17. Thermoplastic rubber comprising ethylene-vinyl acetate copolymer, asphalt and fluxing oil

    Science.gov (United States)

    Hendel, F. J. (Inventor)

    1970-01-01

    A thermoplastic rubber is made from a mixture of between about 10 percent and about 50 percent of asphalt, between about 5 percent and about 30 percent fluxing oil, and between about 35 percent and about 70 percent of a copolymer of polyethylene and vinyl acetate.

  18. Research and Application on Warm Technology of Asphalt Mixture on Soft Asphalt and Rock Asphalt Compound%基于软硬沥青复配的沥青混合料温拌技术的研究与应用

    Institute of Scientific and Technical Information of China (English)

    胡安宇; 张永平; 王飞

    2011-01-01

    On basis of soft asphalt and rock asphalt compound technology, warm asphalt mixture was made by use of soft asphalt and rock asphalt. The principle technology, technological process, design method of warm mix asphalt were presented; the road performance of the warm mixture was texted and the warm asphalt mixture was used to real engineering. Test and survey result indicated that warm mix asphalt almost have the same road performance compared with hot mix asphalt which have the same type of gradation, and the construction temperature can reduce 30℃, the temperature decrease scope was low with the spread paving and compaction process , the mixture was more easily to be compacted, the exhaust gas discharge level can be effectively reduced in mixing, spread paving and compaction process.%基于软硬沥青复配技术,实施沥青混合料的温拌配制.阐述该类温拌沥青混合料的技术原理、制备工艺和配合比设计关键;测试该类混合料的路用性能,并用于沥青路面工程铺筑.室内试验和现场检测结果表明,与同级配类型的、基质沥青配制的热拌沥青混合料相比,该类沥青混合料的高温稳定性和抗疲劳性略胜一筹,水稳定性相当;现场拌和温度可以降低30℃左右,摊铺和碾压过程中的降温幅度较低,更易压实;可以有效降低拌和、摊铺和压实过程中的废气排放水平.

  19. Effect of Short-Term Aging Process on the Moisture Susceptibility of Asphalt Mixtures and Binders Containing Sasobit Warm Mix Additive

    Directory of Open Access Journals (Sweden)

    Bo Li

    2015-01-01

    Full Text Available Moisture susceptibility is one of the key issues of warm mix asphalt (WMA. In this research, the moisture susceptibility of asphalt mixtures and binders containing Sasobit warm mix additive was investigated in comparison to that of hot mixture asphalt (HMA through laboratory aging experiments. The WMA asphalt mixtures were aged in the laboratory at three aging temperatures and times. The moisture susceptibility of the asphalt mixtures was measured through the laboratory immersed Marshall test and freeze-thaw splitting test. The surface free energy (SFE of asphalt binders extracted from WMA asphalt mixtures was determined by the sessile drop method. The results show that the aging time and temperature have a significant effect on the improvement in moisture susceptibility in terms of both the freeze-thaw splitting strength ratios and the residual Marshall stability of asphalt mixtures containing Sasobit warm mix additive. The SFE of asphalt binders extracted from Sasobit warm mix increased with the aging time and temperature. The moisture susceptibility of the asphalt mixtures and binders containing Sasobit warm mixes was similar to or even greater than that of HMA aging under certain conditions.

  20. Design and construction of Nemiscau-1 Dam, the first asphalt core rockfill dam in North America

    Energy Technology Data Exchange (ETDEWEB)

    Alicescu, V.; Tournier, J.P. [Hydro-Quebec, Montreal, PQ (Canada); Vannobel, P. [Societe d' Energie de la Baie James, Montreal, PQ (Canada)

    2008-07-01

    The concept of asphalt as a waterproofing medium inside embankment dams was originally developed in Germany in the 1960s. More than 100 asphalt core rockfill (ACRD) dams have been completed or are under construction. They all have a strong record without any seepage problems or required maintenance. After using the glacial till as waterproofing material for its embankment dams for more than 50 years, Hydro-Quebec is now looking to develop new dam concepts, mainly for the zones where natural waterproofing materials do not exist. In order to do so, the company has decided to design and construct the Nemiscau-1 Dam as a prototype ACRD. This paper presented the detailed design criteria, technical specifications as well as some information concerning the construction of the dam such as asphalt mix design. The given dam site, geology and materials is well suited for a dam with an asphalt core and the chosen core thickness of minimum 400 mm was found to be appropriate, given the small net water head. The main reservoir levels as well as the characteristics of the dam were also listed. Information on the general construction of the dam was provided. It was concluded that the longitudinal profile of the rock excavation and concrete plinth must be optimized, with an optimum balance between the rock excavation, the volume and shape of the concrete plinth and finally, the placement of the asphalt core with the manual method. Several combinations of these 3 elements must be analyzed at the design stage and the most cost effective one should be applied on site. 5 tabs., 7 figs.

  1. Investigation of PAH biomarkers in the urine of workers exposed to hot asphalt.

    Science.gov (United States)

    Sobus, Jon R; McClean, Michael D; Herrick, Robert F; Waidyanatha, Suramya; Onyemauwa, Frank; Kupper, Lawrence L; Rappaport, Stephen M

    2009-08-01

    Airborne emissions from hot asphalt contain mixtures of polycyclic aromatic hydrocarbons (PAHs), including several carcinogens. We investigated urinary biomarkers of three PAHs, namely naphthalene (Nap), phenanthrene (Phe), and pyrene (Pyr) in 20 road-paving workers exposed to hot asphalt and in 6 road milling workers who were not using hot asphalt (reference group). Our analysis included baseline urine samples as well as postshift, bedtime, and morning samples collected over three consecutive days. We measured unmetabolized Nap (U-Nap) and Phe (U-Phe) as well as the monohydroxylated metabolites of Nap (OH-Nap), Phe (OH-Phe), and Pyr (OH-Pyr) in each urine sample. In baseline samples, no significant differences in biomarker levels were observed between pavers and millers, suggesting similar background exposures. In postshift, bedtime, and morning urine samples, the high pairwise correlations observed between levels of all biomarkers suggest common exposure sources. Among pavers, levels of all biomarkers were significantly elevated in postshift samples, indicating rapid uptake and elimination of PAHs following exposure to hot asphalt (biomarker levels were not elevated among millers). Results from linear mixed-effects models of levels of U-Nap, U-Phe, OH-Phe, and OH-Pyr across pavers showed significant effects of work assignments with roller operators having lower biomarker levels than the other workers. However, no work-related effect was observed for levels of OH-Nap, apparently due to the influence of cigarette smoking. Biological half-lives, estimated from regression coefficients for time among pavers, were 8 h for U-Phe, 10 h for U-Nap, 13 h for OH-Phe and OH-Pyr, and 26 h for OH-Nap. These results support the use of U-Nap, U-Phe, OH-Phe, and OH-Pyr, but probably not OH-Nap, as short-term biomarkers of exposure to PAHs emanating from hot asphalt.

  2. Biogeochemical Controls on Authigenic Carbonate Formation at the Chapopote "Asphalt Volcano", Bay of Campeche

    Science.gov (United States)

    Naehr, T. H.; Bohrmann, G.; Birgel, D.; MacDonald, I. R.

    2007-12-01

    Unusual hydrocarbon seep features, so-called "asphalt volcanoes" were explored in the Bay of Campeche, southern Gulf of Mexico, in the spring of 2006. Guided by data from satellite imagery that showed evidence for persistent oil seeps in the region, we investigated lava-like flows of solidified asphalt along the rim of a dissected salt dome at a water depth of about 3000 m. Fresh asphalt contains copious thermogenic gas and gas hydrate. Slabs of authigenic carbonate form surface crusts with layers of oil pooled beneath. Sediments are anoxic with H2S concentrations of 8 to 13 mM. Gas hydrate forms layers and mounds in the surface sediments. Alkalinity profiles show values from 29 to 35 mM, indicating oxidation of hydrocarbons by reduction of seawater sulfate. Molecular and isotopic compositions of gas hydrate and sediment headspace indicate moderately mature, thermogenic gas. Oily sediment extracts and asphalt pieces are composed of a degraded mixture of hydrocarbons with a peak at n-C30 and a few resolved C29 to C32 hopanes. Authigenic carbonate crusts from Chapopote are porous, aragonite-cemented mudstones. Peloidal textures are common, as are bivalve shells and at least two generations of aragonite-cemented intraclasts. The carbon isotopic composition of the authigenic aragonite cements varies between -28.6 ‰ and -17.9 ‰ (PDB), indicating a contribution of carbon from non-methane liquid hydrocarbons to the total pool of dissolved CO2. δ18O values of the carbonates range from +3.2 ‰ to +4.5 ‰ (PDB), suggesting aragonite formation under near-equilibrium conditions in the shallow subsurface. Molecular fossils extracted from one carbonate sample contain abundant 13C-depleted archeal lipids, derived from anaerobic methanotrophs, suggesting that organisms mediating the anaerobic oxidation of methane are closely associated with carbonate authigenesis at the Chapopote asphalt seep site.

  3. Testing and assessing the performance of a new warm mix asphalt with SMC

    Directory of Open Access Journals (Sweden)

    Changfa Ai

    2015-12-01

    Full Text Available Warm mix asphalt (WMA is a new technology which asphalt mix is produced and placed at normal temperature. It has advantages including low cost, environmentally friendly, haul-convenience, and so on. WMA has been widely tested and applied in the USA in the last decade, but it has just started in China. Recently, a new WMA using a new plastic-macromolecule-normal temperature additive, which was called “SMC” by the production company, was introduced as asphalt modifier. Based on discussing the strength forming process of this new WMA with SMC, a series of laboratory tests, including Marshall stability test (MST, boiling test (BT, modified immersion Marshall test (MIMT, freeze-thaw splitting test (FTST, rutting test (RT, low-temperature bending test (LTBT, and abrasion loss test (ALT, were conducted in this study to assess the performance of this WMA and the capability of applying it on low volume roads in China. SMC modified asphalt mixed under normal temperature is used in testing samples. It was found that this WMA product exhibited merits on its strength, which was about 6.7 kN bigger than the requirement of 5.0 kN in the JTG F40-2004, on high-temperature stability, which is about 1100 times/mm greater than the requirement of 600–1000 times/mm in the JTG F40-2004, and on its storage stability. Based on these indicators, it is recommended that this product could be used for low volume low class roads construction. However, due to the relatively lower water resistance and low-temperature cracking resistance, this product is suggested to be applied first in the areas with warm weather and little rainfall. In order to improve the performance of this WMA with SMC, further research on this SMC asphalt modifier should be continued.

  4. 沥青层厚度对沥青路面车辙的影响研究%Research on Influences of Asphalt Layer Thickness on Asphalt Pavement Ruts

    Institute of Scientific and Technical Information of China (English)

    毛磊; 周建山

    2014-01-01

    Based on the elastic layer system theory and by means of ABAQUS finite element software, this paper performs numerical simulation for asphalt pavement structures, and analyzes the influences of asphalt pavement thickness on permanent deformation of asphalt pavement. The analysis shows very remarkable influences of asphalt layer thickness on compaction type ruts, and the depth of ruts increases with asphalt layer thickness, but the tendency of increase gradually reduces from original 10% to 4%;the depth of the maximum shear stress in asphalt layer does not change with asphalt layer thickness and appears at 4 ~6 mm under road surface, therefore, the influence of asphalt layer thickness on shear flow deformation is not significant.%基于弹性层状体系理论,利用ABAQUS有限元软件对沥青路面结构进行数值模拟,分析沥青层厚度对沥青路面永久变形的影响。分析表明:沥青层厚度对压密型车辙的影响非常显著,车辙深度随着沥青层厚度的增加而增大,但是随着沥青层厚度的增加,增长趋势逐渐减少,由最初的10%的增长量减少到4%;沥青层内最大剪应力出现的深度不随沥青层厚度的变化而变化,均出现在路表下4~6 cm处,因此沥青层厚度对剪切流动变形的影响不是很大。

  5. The design and analysis on asphalt concrete pavement%沥青混凝土路面设计分析

    Institute of Scientific and Technical Information of China (English)

    王星茹

    2016-01-01

    This paper introduced the design process of urban road asphalt pavement,discussed the material and type of asphalt concrete pave-ment,from the pavement structure combination design,pavement design index,pavement structure layer calculation and other aspects,elabora-ted the design method of asphalt concrete pavement,made the asphalt pavement meet the structure strength and stability requirements.%介绍了城市道路沥青路面设计的流程,论述了沥青混凝土面层的材料与类型,从路面结构组合设计、路面设计指标、路面结构层计算等方面,阐述了沥青混凝土路面的设计方法,使沥青路面满足结构强度和稳定性的要求.

  6. Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method

    DEFF Research Database (Denmark)

    Feng, Huan; Pettinari, Matteo; Stang, Henrik

    2015-01-01

    In this paper, the viscoelastic behavior of asphalt mixture was studied by using discrete element method. The dynamic properties of asphalt mixture were captured by implementing Burger’s contact model. Different ways of taking into account of the normal and shear material properties of asphalt...... mixtures have been reviewed. Two models, Model I and Model II, with different design parameters were developed and compared. For Model I, Burger’s model parameters in normal and shear direction were calibrated by using laboratory test results from Frequency Sweep Test performed in both normal and shear...... direction, respectively; while for Model II, the same calibrated parameters in the normal direction were used, but the values for the shear direction were chosen to be equal with the normal direction. The complex modulus of asphalt mixtures were predicted for both optimized models by conducting DE...

  7. 沥青改性对粗粒式沥青混凝土的性能影响分析%Performance Impact Analysis of Asphalt Modification on Coarse Grained Type Asphalt Concrete

    Institute of Scientific and Technical Information of China (English)

    赵茜

    2012-01-01

    针对下面层沥青混合料的水稳定性和抗车辙性能进行研究,选择普通沥青、SBS改性沥青以及岩沥青改性对粗粒式沥青混合料AC25进行改性,对比其性能的优劣。研究结果表明采用岩沥青改性可以大大提高下面层沥青混合料的性能,是一种较好的提高长大纵坡以及交叉口区域沥青路面性能的方法。%Common asphalt, SBS modified asphalt and rock bitumen modification of coarse grained type AC25 modified asphalt mix- ture was chose to compare their performance. The results show that the rock asphalt modification can greatly improve the levels of asphalt mixture performance, and it is a better method to improve the performance of asphalt pavement under the long downhill and intersection area.

  8. 硬质沥青及其混合料高温性能试验研究%Research on Test for High-temperature Performance of Hard Asphalt and Hard Asphalt Mixture

    Institute of Scientific and Technical Information of China (English)

    杨志勇; 黄拓; 肖畅

    2011-01-01

    Through DSR tesl lo A-30 hard asphalt and A-70 asphalt, the high-temperature performance of A-30 hard asphalt was analyzed; through single axle creep test and rutting test to four kinds of asphalt mixture, the high-temperature performance of A-30 hard asphalt mixture was analyzed. From that we can draw a conclusion that the hard asphalt mixture which can enhance the high temperature stability of pavement structure is suitable for the paving of base layer.%本文对硬质沥青(A-30)和目前沥青路面常用的重交沥青(A-70)进行了DSR试验,对比分析了30号硬质沥青的高温性能;对四种沥青混合料进行单轴蠕变试验和车辙试验,分析了30号硬质沥青混合料的高温性能.试验结果表明:硬质沥青混合料可提高路面结构的高温稳定性,适用于基层铺装.

  9. Potential contributions of asphalt and coal tar to black carbon quantification in urban dust, soils, and sediments

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Y.; Mahler, B.J.; Van Metre, P.C.; Ligouis, B.; Werth, C.J. [University of Illinois Urbana Champaign, Urbana, IL (USA). Dept. of Civil & Environmental Engineering

    2010-12-01

    Measurements of black carbon (BC) using either chemical or thermal oxidation methods are generally thought to indicate the amount of char and/or soot present in a sample. In urban environments, however, asphalt and coal-tar particles worn from pavement are ubiquitous and, because of their pyrogenic origin, could contribute to measurements of BC. Here we explored the effect of the presence of asphalt and coal-tar particles on the quantification of BC in a range of urban environmental sample types, and evaluated biases in the different methods used for quantifying BC. Samples evaluated were pavement dust, residential and commercial area soils, lake sediments from a small urban watershed, and reference materials of asphalt and coal tar. Total BC was quantified using chemical treatment through acid dichromate (Cr{sub 2}O{sub 7}) oxidation and chemo-thermal oxidation at 375{sup o}C (CTO-375). BC species, including soot and char/charcoal, asphalt, and coal tar, were quantified with organic petrographic analysis. Comparison of results by the two oxidation methods and organic petrography indicates that both coal tar and asphalt contribute to BC quantified by Cr{sub 2}O{sub 7} oxidation, and that coal tar contributes to BC quantified by CTO-375. These results are supported by treatment of asphalt and coal-tar reference samples with Cr2O7 oxidation and CTO-375. The reference asphalt is resistant to Cr{sub 2}O{sub 7} oxidation but not to CTO-375, and the reference coal tar is resistant to both Cr2O7 oxidation and CTO-375. These results indicate that coal tar and/or asphalt can contribute to BC measurements in samples from urban areas using Cr{sub 2}O{sub 7} oxidation or CTO-375, and caution is advised when interpreting BC measurements made with these methods.

  10. Potential contributions of asphalt and coal tar to black carbon quantification in urban dust, soils, and sediments

    Science.gov (United States)

    Yang, Y.; Mahler, B.J.; Van Metre, P.C.; Ligouis, B.; Werth, C.J.

    2010-01-01

    Measurements of black carbon (BC) using either chemical or thermal oxidation methods are generally thought to indicate the amount of char and/or soot present in a sample. In urban environments, however, asphalt and coal-tar particles worn from pavement are ubiquitous and, because of their pyrogenic origin, could contribute to measurements of BC. Here we explored the effect of the presence of asphalt and coal-tar particles on the quantification of BC in a range of urban environmental sample types, and evaluated biases in the different methods used for quantifying BC. Samples evaluated were pavement dust, residential and commercial area soils, lake sediments from a small urban watershed, and reference materials of asphalt and coal tar. Total BC was quantified using chemical treatment through acid dichromate (Cr2O7) oxidation and chemo-thermal oxidation at 375??C (CTO-375). BC species, including soot and char/charcoal, asphalt, and coal tar, were quantified with organic petrographic analysis. Comparison of results by the two oxidation methods and organic petrography indicates that both coal tar and asphalt contribute to BC quantified by Cr2O7 oxidation, and that coal tar contributes to BC quantified by CTO-375. These results are supported by treatment of asphalt and coal-tar reference samples with Cr2O7 oxidation and CTO-375. The reference asphalt is resistant to Cr2O7 oxidation but not to CTO-375, and the reference coal tar is resistant to both Cr2O7 oxidation and CTO-375. These results indicate that coal tar and/or asphalt can contribute to BC measurements in samples from urban areas using Cr2O7 oxidation or CTO-375, and caution is advised when interpreting BC measurements made with these methods. ?? 2010 Elsevier Ltd.

  11. Potential contributions of asphalt and coal tar to black carbon quantification in urban dust, soils, and sediments

    Science.gov (United States)

    Yang, Yaning; Mahler, Barbara J.; Van Metre, Peter C.; Ligouis, Bertrand; Werth, Charles J.

    2010-12-01

    Measurements of black carbon (BC) using either chemical or thermal oxidation methods are generally thought to indicate the amount of char and/or soot present in a sample. In urban environments, however, asphalt and coal-tar particles worn from pavement are ubiquitous and, because of their pyrogenic origin, could contribute to measurements of BC. Here we explored the effect of the presence of asphalt and coal-tar particles on the quantification of BC in a range of urban environmental sample types, and evaluated biases in the different methods used for quantifying BC. Samples evaluated were pavement dust, residential and commercial area soils, lake sediments from a small urban watershed, and reference materials of asphalt and coal tar. Total BC was quantified using chemical treatment through acid dichromate (Cr 2O 7) oxidation and chemo-thermal oxidation at 375 °C (CTO-375). BC species, including soot and char/charcoal, asphalt, and coal tar, were quantified with organic petrographic analysis. Comparison of results by the two oxidation methods and organic petrography indicates that both coal tar and asphalt contribute to BC quantified by Cr 2O 7 oxidation, and that coal tar contributes to BC quantified by CTO-375. These results are supported by treatment of asphalt and coal-tar reference samples with Cr 2O 7 oxidation and CTO-375. The reference asphalt is resistant to Cr 2O 7 oxidation but not to CTO-375, and the reference coal tar is resistant to both Cr 2O 7 oxidation and CTO-375. These results indicate that coal tar and/or asphalt can contribute to BC measurements in samples from urban areas using Cr 2O 7 oxidation or CTO-375, and caution is advised when interpreting BC measurements made with these methods.

  12. Development of a Full-Depth Wheel Tracking Test for Asphalt Pavement Structure: Methods and Performance Evaluation

    OpenAIRE

    Hui Wang; Zepeng Fan; Jiupeng Zhang

    2016-01-01

    The rutting performance of asphalt pavement structure relies on the high temperature properties of asphalt mixture as well as the pavement structure and thickness. In order to investigate the influence of the structure and thickness, a full-depth wheel tracking test is developed in this research by improving the conventional wheel tracking test apparatus. The newly proposed test method is capable of varying its load speed and load size, controlling its specimen temperature gradient, and simul...

  13. 沥青疲劳特性的研究%Fatigue Characteristic of Asphalt

    Institute of Scientific and Technical Information of China (English)

    单丽岩; 谭忆秋; 李晓琳

    2011-01-01

    受粘弹特性的影响,沥青的疲劳特性具有特殊性.目前已有研究发现沥青具有自愈性,即荷载停止作用后沥青的模量可以慢慢恢复.因此开展不同荷载作用模式下沥青疲劳特性的研究是十分必要的.文中借助于DSR研究了连续加载模式下沥青的疲劳特性,采用4种沥青疲劳评价指标(50%G*,DER,DR,δ)评价了沥青的疲劳特性,研究了沥青的自愈能力.研究表明:沥青的疲劳性能随着应力的增大而降低.当控制应力较大时,模量随着荷载作用次数的增加而减小;当控制应力较小时,出现硬化现象.50%G*,DER,DR,δ这几种疲劳寿命评价指标均存在一定的不足.沥青的自愈性对沥青的疲劳特性有重要影响.荷载停止作用初期,沥青模量的恢复程度较大.当时间足够长时,沥青的模量可以恢复到初始模量,但粘弹比例发生了变化.%Fatigue has been one of the hot topics all the time in the world. The fatigue characteristic of asphalt has particularity because of its viscoelasticity characteristic. At present, the healing characteristic of asphalt has been found, that is when the loading is stopped the modulus of asphalt can recover slowly. So it is essential to study the fatigue characteristic of asphalt at different loading modes. The fatigue characteristic of asphalt under continuous loading mode has been studied, their fatigue characteristics were evaluated by four kinds of indexes (50%G * 、DER、DR、δ ) and the healing ability of asphalt has been studied. The results show that the fatigue performance of asphalt descends with the loading increasing. When the loading is bigger, the modulus decreases with the times of loading increasing, and when the loading is smaller, there is stiffness phenomenon. The indexes (50%G * 、DER、DR、δ ) have some deficiency in evaluating the fatigue characteristic of asphalt. The healing characteristic has an important performance on the fatigue characteristic

  14. An In-Depth Investigation into the Physicochemical, Thermal, Microstructural, and Rheological Properties of Petroleum and Natural Asphalts

    Directory of Open Access Journals (Sweden)

    Nader Nciri

    2016-10-01

    Full Text Available Over the last decade, unexpected and sudden pavement failures have occurred in several provinces in South Korea. Some of these failures remain unexplained, further illustrating the gaps in our knowledge about binder chemistry. To prevent premature pavement distress and enhance road performance, it is imperative to provide an adequate characterization of asphalt. For this purpose, the current research aims at inspecting the chemistry, microstructure, thermal, and physico-rheological properties of two types of asphalt, namely petroleum asphalt (PA and natural asphalt (NA. The binders were extensively investigated by using elemental analysis, thin-layer chromatography with flame ionization detection (TLC-FID, matrix-assisted laser desorption ionization time-of-fight mass spectroscopy (MALDI-TOF-MS, Fourier transform infrared spectroscopy (FT-IR, Raman spectroscopy (RS, Nuclear magnetic resonance spectroscopy (1H-NMR, ultraviolet and visible spectroscopy (UV-VIS, X-ray diffraction (XRD, scanning electron microscopy (SEM, thermogravimetric analysis (TGA, differential scanning calorimetry (DSC, penetration, softening point, ductility, and viscosity tests. The findings of this research have revealed the distinct variations between the chemical compositions, microstructures, and thermo-rheological properties of the two asphalts and provided valuable knowledge into the characteristics of the binders. Such insight has been effective in predicting the performance or distress of road pavement. This paper will, therefore, be of immediate interest to materials engineers in state highway agencies and asphalt industries.

  15. Investigation of Micro-mechanical Response of Asphalt Mixtures by a Three-dimensional Discrete Element Model

    Institute of Scientific and Technical Information of China (English)

    HOU Shuguang; ZHANG Dong; HUANG Xiaoming; ZHAO Yongli

    2015-01-01

    The micro-mechanical response of asphalt mixtures was studied using the discrete element method. The discrete element sample of stone mastic asphalt was generated first and the vehicle load was applied to the sample. A user-written program was coded with the FISH language in PFC3D to extract the contact forces within the sample and the displacements of the particles. Then, the contact forces within the whole sample, in asphalt mastic, in coarse aggregates and between asphalt mastic and coarse aggregates were investigated. Finally, the movement of the particles in the sample was analyzed. The sample was divided into 15 areas and a figure was drawn to show how the balls move in each area according to the displacements of the balls in each area. The displacements of asphalt mastic balls and coarse aggregates were also analyzed. The experimental results explain how the asphalt mixture bears vehicle load and the potential reasons why the rutting forms from a micro-mechanical view.

  16. Genotoxic effects of fumes from asphalt modified with waste plastic and tall oil pitch.

    Science.gov (United States)

    Lindberg, Hanna K; Väänänen, Virpi; Järventaus, Hilkka; Suhonen, Satu; Nygren, Jonas; Hämeilä, Mervi; Valtonen, Jarkko; Heikkilä, Pirjo; Norppa, Hannu

    2008-05-31

    As the use of recycled materials and industrial by-products in asphalt mixtures is increasing, we investigated if recycled additives modify the genotoxicity of fumes emitted from asphalt. Fumes were generated in the laboratory at paving temperature from stone-mastic asphalt (SMA) and from SMA modified with waste plastic (90% polyethylene, 10% polypropylene) and tall oil pitch (SMA-WPT). In addition, fumes from SMA, SMA-WPT, asphalt concrete (AC), and AC modified with waste plastic and tall oil pitch (AC-WPT) were collected at paving sites. The genotoxicity of the fumes was studied by analysis of DNA damage (measured in the comet assay) and micronucleus formation in human bronchial epithelial BEAS 2B cells in vitro and by counting mutations in Salmonella typhimurium strains TA98 and YG1024. DNA damage was also assessed in buccal leukocytes from road pavers before and after working with SMA, SMA-WPT, AC, and AC-WPT. The chemical composition of the emissions was analysed by gas chromatography/mass spectrometry. The SMA-WPT fume generated in the laboratory induced a clear increase in DNA damage in BEAS 2B cells without metabolic activation. The laboratory-generated SMA fume increased the frequency of micronucleated BEAS 2B cells without metabolic activation. None of the asphalt fumes collected at the paving sites produced DNA damage with or without metabolic activation. Fumes from SMA and SMA-WPT from the paving sites increased micronucleus frequency without metabolic activation. None of the asphalt fumes studied showed mutagenic activity in Salmonella. No statistically significant differences in DNA damage in buccal leukocytes were detected between the pre- and post-shift samples collected from the road pavers. However, a positive correlation was found between DNA damage and the urinary metabolites of polycyclic aromatic hydrocarbons (PAHs) after work shift, which suggested an association between occupational exposures during road paving and genotoxic effects. Our

  17. Expert meeting with the Belgoprocess Inc. on the fire and explosion accident of the asphalt solidification facility. Search and investigation on cause elucidation and reoccurrence control for the fire and explosion accident of the asphalt solidification facility. A visiting report on abroad

    Energy Technology Data Exchange (ETDEWEB)

    Funasaka, Hideyuki; Fujita, Hideto; Nakamura, Hirofumi; Koyama, Tomozo

    1997-11-01

    In order to investigate in detail on fire cause materials, test results of thermal analysis on waste liquids, and flow of affairs relating to the fire accident (15th December, 1981) of the Euro Bitum Plant (an asphalt solidification facility of the middle level wastes) settled at the Eurochemic reprocessing work in the Kingdom of Belgium, resemble to the present accident, 4 members of the Cause Elucidation Group and Mr. Kaneko, director of the Paris Office of PNC visited to Belgium to hold a meeting with experts of the Belgoprocess Inc. for 4 days. In this meeting, after exchanging mutual detail informations on accident occurred at the Euro Bitum Plant and fire and explosion accident of the asphalt solidification facility, some discussions on cause supposition of the present accident. For cause of the fire, mutual differences were found. As a state at occurring fires was much resemble, their followed states seemed to be extremely different on responses of operators to fire-extinguishing action, filter exchanging and so forth. As finishing to recover the plant after 1 month passed from the accident to restart its operation, the Belgoprocess, Inc. has conducted some improvements of the facility such as sufficiency of fire extinguishing apparatus, addition and improvements of fire detecting means, direct measurement of solid temperature and so on, as well as reinforcement of thermal analysis procedure and renewal to new apparatus. Although no special supposition on cause of the fire at this meeting, a lot of items to learn such as operation system, responses after accident, and so forth were acquired. (G.K.)

  18. Evaluation of the relationship between PAH content and mutagenic activity of fumes from roofing and paving asphalts and coal tar pitch.

    Science.gov (United States)

    Machado, M L; Beatty, P W; Fetzer, J C; Glickman, A H; McGinnis, E L

    1993-11-01

    Fume condensates from asphalt and coal tar pitch were evaluated to determine if polycyclic aromatic hydrocarbon (PAH) composition, crude oil source, or temperature at which the fume was generated correlated with mutagenic activity. The fume condensates were tested for mutagenic activity using a modified Ames Test. Benzo[a]pyrene (BP) and other PAHs were detected in all samples. The concentration of BP in coal tar pitch was 18,100 ppm while the concentration in asphalt was less than 6 ppm. Coal tar fumes contained between two and three orders of magnitude more BP, as well as other PAH species, than asphalt fumes. Coal tar fume condensates were also approximately 100 times more mutagenic than those of asphalt. Generation temperature, crude oil source, and/or process conditions affected the PAH concentrations but not the mutagenicity in roofing asphalt fume condensates. With paving asphalt fumes, PAH content and mutagenicity varied with crude oil source but not with processing conditions; due to limited data, it was not possible to determine the effect of generation temperature. Coal tar pitch fumes generated at 316 degrees C contained significantly higher concentrations of PAHs than those generated at 232 degrees C and the mutagenic activity generally paralleled the PAH content. A subset of the paving asphalts demonstrated good correlation between mutagenicity and three- to seven-ring PAH content. These results indicate that asphalt fumes are far less mutagenic than coal tar fumes. Asphalt fumes differ in their ability to induce mutagenic activity, and, most likely, in their potential carcinogenicity.

  19. Effect of Zn/Al Layered Double Hydroxide Containing 2-Hydroxy-4-n-octoxy-benzophenone on UV Aging Resistance of Asphalt

    Directory of Open Access Journals (Sweden)

    Chao Peng

    2015-01-01

    Full Text Available UV radiation is a main factor to reduce the service life of asphalt pavement due to the UV aging of asphalt binder. To obtain enhanced UV aging resistance, an organic UV absorber called 2-hydroxy-4-n-octoxy-benzophenone (HNOB had been intercalated into an inorganic UV absorber called Zn/Al layered double hydroxide (LDH to play a combined anti-UV role in asphalt binder. Fourier transform infrared spectroscopy revealed that HNOB anions have been intercalated into the interlayer galleries of Zn/Al-LDH containing HNOB anions (Zn/Al-HNOB−-LDH. X-ray diffraction results of Zn/Al-LDH containing CO32− anions (Zn/Al-CO32--LDH and Zn/Al-CO32--LDH/styrene-butadiene-styrene (SBS modified asphalt disclosed that asphalt molecules entered into LDH interlayer galleries to form an expanded phase structure. UV-Vis absorbance patterns showed that Zn/Al-HNOB−-LDH has a better capacity of blocking UV light due to the synergetic effect of HNOB and Zn/Al-LDH. The chemical fractions analysis, conventional physical tests, and rheological tests of SBS modified asphalt, Zn/Al-CO32--LDH/SBS modified asphalt, and Zn/Al-HNOB−-LDH/SBS modified asphalt before and after UV aging testified that Zn/Al-HNOB−-LDH can improve the UV aging resistance of SBS modified asphalt more significantly.

  20. 冷拌沥青混合料乳化沥青研究%Study on emulsified asphalt of cold asphalt mixture

    Institute of Scientific and Technical Information of China (English)

    钱俊懿; 姜艺; 胡新华

    2015-01-01

    A study was conducted to evaluate the performance of two types of emulsifiers , including EA-300 and Weiss Vic .The emulsifiers were utilized to produce emulsified asphalts .It was found that emulsified asphalt per-formed well when the EA-300 content was 2.8%and the soap solution had a pH value between 2 and 3.The corre-sponding values for Weiss Vic were 1 .6%for the emulsifier content and a pH value between 1 and 2 for the sop so-lution.The results of this study indicate that the emulsified asphalt with either of the two emulsifiers will meet the requirements of the standards and specifications .This paper describes the evaluation procedures and presents the study results .%采用EA-300与美德维斯维克两种乳化剂分别制备了乳化沥青,并按照规范检测了乳化沥青的相关性能。对于EA-300的乳化剂,选用乳化剂摻量为2.8%,皂液pH为2—3时,制备出来的乳化沥青的性能较好;对于美德维斯维克的乳化剂,选用乳化剂摻量为1.6%,皂液pH为1—2时,制备出来的乳化沥青的性能较好。通过试验发现,乳化沥青均能满足规范要求,可以很好的运用于冷拌沥青混合料中。

  1. Fatigue Properties of Layered Double Hydroxides Modified Asphalt and Its Mixture

    Directory of Open Access Journals (Sweden)

    Xing Liu

    2014-01-01

    Full Text Available This study investigated the influence of layered double hydroxides (LDHs on the fatigue properties of asphalt mixture. In this paper, different aging levels (thin film oven test (TFOT and ultraviolet radiation aging (UV aging for short of bitumen modified with various mass ratios of the LDHs were investigated. The TFOT and UV aging process were used to simulate short-term field thermal-oxidative aging and long-term field light UV aging of bitumen, respectively. The influences of LDHs on the fatigue properties of LDHs were evaluated by dynamic shear rheometer (DSR and indirect tensile fatigue test. Results indicated that the introduction of LDHs could change the fatigue properties of bitumen under a stress control mode. The mixture with modified bitumen showed better fatigue resistance than the mixture with base bitumen. The results illustrated that the LDHs would be alternative modifiers used in the bitumen to improve the lifetime of asphalt pavements.

  2. The Comparison of Engineering Properties Between Single and Double Layer Porous Asphalt made of Packing Gradation

    Directory of Open Access Journals (Sweden)

    Hardiman M. Y

    2008-01-01

    Full Text Available is paper presents the comparison of engineering properties between single and double layer porous asphalt (SLPA and DLPA made of packing gradation. Three nominal maximum aggregate sizes (NMAS were tested each made up of 10, 14, and 20 mm for SLPA. While for the DLPA with 30, 20, and 15 mm top layer are made of 10 and 14 mm NMAS, with a base layer of 20 mm NMAS. Total thickness of all mixes is 70 mm. Binders used are 60/70 penetration base bitumen and polymer binder styrene-butadiene-styrene (SBS. The result shows that the properties of SLPA mix namely permeability and resistance to abrasion loss decreases when the NMAS in SLPA decreases. The abrasion loss of DLPA mixes increases when the porous asphalt top layer thickness decreases, while drainage time value decreases. However, SLPA with 20 mm NMAS exhibits higher abrasion loss compared to all DLPA mixes.

  3. The effect of cyclic hardening on fatigue properties of modified asphalt

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The phenomenon of cyclic hardening is observed in fatigue tests of modified asphalt controlled by low strain/stress level and it is not clear how the phenomenon affects the fatigue properties of binders. The special time weep tests were performed to investigate the point. Tests results indicate that the cyclic hardening is caused by the rearrangement of molecules in binders, and it can make the inner structure of binders getting stable and increase the fatigue properties of asphalt binders. But fatigue damage occurs when fatigue tests start, no matter the phenomenon of cyclic hardening happens or not. If the controlled load is low, the effect of rearrangement of molecules on material is beyond the effect of fatigue damage so that the cyclic hardening can be observed. When the load conditions get worse, the effect of slight fatigue damages produced in hardening stage will show.

  4. Performance Characteristic of Cold Recycled Mixture with Asphalt Emulsion and Chemical Additives

    Directory of Open Access Journals (Sweden)

    Shaowen Du

    2015-01-01

    Full Text Available Three types of chemical additives were used to modify asphalt emulsion recycled mixture. These chemical additives include composite Portland cement (CPC, hydrated lime (HL, and a combination of hydrated lime and ground-granulated blast-furnace slag (GGBF. The influence of different additives on the recycled mixture performance was investigated by volumetric and strength tests, moisture susceptibility test, rutting resistance test, and low temperature bending test. To better understand its performance characteristic, the microstructure images of the recycled mixture were observed by environmental scanning electron microscope (ESEM. Test results demonstrate that the performance improvement of the emulsion recycled mixture depends on the types and content of chemical additives. Several recommendations are presented for the selection of chemical materials. Based on ESEM image analysis, the interface bonding mechanism is proposed to explain the performance characteristic of the recycled mixture with asphalt emulsion and cementitious materials.

  5. Surface roughness effects on the solar reflectance of cool asphalt shingles

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Hashem; Berdahl, Paul; Akbari, Hashem; Jacobs, Jeffry; Klink, Frank

    2008-02-17

    We analyze the solar reflectance of asphalt roofing shingles that are covered with pigmented mineral roofing granules. The reflecting surface is rough, with a total area approximately twice the nominal area. We introduce a simple analytical model that relates the 'micro-reflectance' of a small surface region to the 'macro-reflectance' of the shingle. This model uses a mean field approximation to account for multiple scattering effects. The model is then used to compute the reflectance of shingles with a mixture of different colored granules, when the reflectances of the corresponding mono-color shingles are known. Simple linear averaging works well, with small corrections to linear averaging derived for highly reflective materials. Reflective base granules and reflective surface coatings aid achievement of high solar reflectance. Other factors that influence the solar reflectance are the size distribution of the granules, coverage of the asphalt substrate, and orientation of the granules as affected by rollers during fabrication.

  6. Modeling of asphalt by means of discrete element method – an initial study

    DEFF Research Database (Denmark)

    Feng, Huan; Hededal, Ole; Stang, Henrik

    type of numerical simulation method which allows the finite displacement and rotation of discrete particles, making it an excellent tool to simulate the complex micro interaction between aggregate particles within an asphalt mixture, [3],[4] . In this research, PFC3D – a commercial DEM program...... of conducting time-consuming and lab-costly procedures. The use of numerical models, capable of reducing greatly the testing cost, has shown great potential in characterizing asphalt-aggregate mixtures for both material evaluation and structural design purposes, [1],[2]. Discrete element method (DEM) is one...... – will be applied. The work presented here will focus on the discrete element method as a tool for modelling composite materials, i.e. determination of a representative volume; boundary conditions; characterisation of the components mastic (binder + filler) and aggregates; and establishment of virtual test samples...

  7. The Use of Steel Works Crushed Slag (Lidonit in the Preparation of Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Gh. Gugiuman

    2004-01-01

    Full Text Available The high costs of the quarry crushed aggregates (producer costs to which additional railroad transport costs are taken into account result in the fact that at large distance away from quarry lesser amounts of chippings and crushing sands are provided only. The initiation of the crushed aggregates production manufactured out of steelworks crushed slag. Lidonit, at a competitive delivering price, has led to the first series of laboratory tests. In the first stage two asphalt concrete mixtures were made in cube-shaped and cylinder-shaped (Marshall test-tubes on which physical and mechanical characteristic values are determined. The results of these first tests outlined the real opportunity of using these products in supplying the roads and streets with asphalt mix for pavements.

  8. Investigation of Using Waste Welded Tuff Material as Mineral Filler in Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Sebnem KARAHANCER

    2016-08-01

    Full Text Available In this paper, the welded tuff waste- known as koyke in Isparta region - was used in the hot mix asphalt (HMA as mineral filler for reduction of the moisture susceptibility of HMA. Optimum binder content was assessed with Marshall Design Method. First of all, welded tuff was substituted as filler with limestone filler in proportion of 50% and 100%. After that Marshall Stability test was performed on specimens. The results showed that the 50% substitution was more effective than the 100% substitution. Therefore, welded tuff was substituted with limestone filler in proportion of 25%, 50%, 65% and 75%. Next, Indirect Tensile Strength test was practiced on the fabricated specimens and the results were assessed. According to the Indirect Tensile Strength results, welded tuff with 65% was given higher strength than the limestone filler. As a result, it has come up that welded tuff can be used as mineral filler in the hot mix asphalt.

  9. Use of Reclaimed Asphalt Pavement in Conjunction with Ground Improvement: A Case History

    Directory of Open Access Journals (Sweden)

    Kevin C. Foye

    2011-01-01

    Full Text Available The use of Reclaimed Asphalt Pavement (RAP in lieu of virgin crushed stone aggregate is becoming a widely accepted practice for a number of construction applications, particularly pavement base courses. A number of laboratory RAP studies have considered the mechanical properties of RAP bases in order to support pavement designs incorporating RAP. These studies have revealed a number of interesting relationships between RAP moisture content, compaction, and stiffness. This paper discusses the experiences of a design-build contractor integrating a geosynthetic ground improvement program with a RAP base during the reconstruction of a 1.95 ha asphalt parking lot. Field observations of base course construction with RAP explore some of the implications of laboratory findings. A number of interesting observations on the technical, construction, and economic issues resulting from the project challenges and the use of RAP are presented.

  10. Performance Evaluation of Crumb Rubber Modified Stone Mastic Asphalt Pavement in Malaysia

    Directory of Open Access Journals (Sweden)

    Nuha Salim Mashaan

    2013-01-01

    Full Text Available To prevent pavement distresses there are various solutions such as adopting new mix designs or utilisation of asphalt additives. The primary aim of this study was to investigate the effect of adding crumb tyre rubber as an additive to SMA mixture performance properties. This study investigated the essential aspects of modified asphalt mixtures in order to better understand the influence of CRM modifiers on volumetric, mechanical, and stiffness properties of SMA mixture. In this study, virgin bitumen 80/100 penetration grade was used, modified with crumb rubber (CRM at five different modification levels, namely, 6%, 12%, 16%, and 20%, respectively, by weight of the bitumen. The appropriate amount of the added CRM was found to be 12% by weight of bitumen. This percentage results in the maximum level of stability. The resilient modulus (Mr of modified SMA samples including different percentages of CRM was obviously higher in comparison with that of unmodified samples.

  11. Shear resistance properties of TPS modified bitumen binders and asphalt mixtures

    Institute of Scientific and Technical Information of China (English)

    曹庭维; 吴少鹏; 刘聪慧; 张涛

    2008-01-01

    Shear resistance properties of the virgin bitumen and modified bitumen binders with Tafpack Super(TPS) modifier and SBS modified bitumen were discussed.Dynamic shear rheometer(DSR) was used to measure the laboratory creep data for these binders over a wide range of constant shear stresses at 20 ℃ to characterize the shear creep behaviors of all kinds of asphalt binders,and the rutting test system was used to investigate the permanent deformation of porous asphalt mixtures using the above bitumen binders for a fixed compressive stress.The shear strain rate and shear creep modulus were used to characterize the shear creep behavior of the TPS modified bitumen,and the rutting test results were used to show the consistency of porous asphalt mixtures with the bitumen binders.Results indicate that a distinction of shear creep strain can be made among different contents of TPS modified bitumen at the same stress level,where the shear creep strain-time response curve of the SBS modified bitumen binder is between the curves of the 8% TPS and 12% TPS modified bitumen binders.The shear strain rate and the shear creep modulus of the TPS modified bitumen binders are obtained to compare with those of the SBS modified bitumen binder which results in the same trend as the shear creep strain-time response curve.Permanent deformation results of all the porous asphalt mixtures from the rutting test show reasonable agreement with the findings of the shear strain rates and shear creep modulus over the range of shear stress levels.

  12. Asphalt-derived high surface area activated porous carbons for carbon dioxide capture.

    Science.gov (United States)

    Jalilov, Almaz S; Ruan, Gedeng; Hwang, Chih-Chau; Schipper, Desmond E; Tour, Josiah J; Li, Yilun; Fei, Huilong; Samuel, Errol L G; Tour, James M

    2015-01-21

    Research activity toward the development of new sorbents for carbon dioxide (CO2) capture have been increasing quickly. Despite the variety of existing materials with high surface areas and high CO2 uptake performances, the cost of the materials remains a dominant factor in slowing their industrial applications. Here we report preparation and CO2 uptake performance of microporous carbon materials synthesized from asphalt, a very inexpensive carbon source. Carbonization of asphalt with potassium hydroxide (KOH) at high temperatures (>600 °C) yields porous carbon materials (A-PC) with high surface areas of up to 2780 m(2) g(-1) and high CO2 uptake performance of 21 mmol g(-1) or 93 wt % at 30 bar and 25 °C. Furthermore, nitrogen doping and reduction with hydrogen yields active N-doped materials (A-NPC and A-rNPC) containing up to 9.3% nitrogen, making them nucleophilic porous carbons with further increase in the Brunauer-Emmett-Teller (BET) surface areas up to 2860 m(2) g(-1) for A-NPC and CO2 uptake to 26 mmol g(-1) or 114 wt % at 30 bar and 25 °C for A-rNPC. This is the highest reported CO2 uptake among the family of the activated porous carbonaceous materials. Thus, the porous carbon materials from asphalt have excellent properties for reversibly capturing CO2 at the well-head during the extraction of natural gas, a naturally occurring high pressure source of CO2. Through a pressure swing sorption process, when the asphalt-derived material is returned to 1 bar, the CO2 is released, thereby rendering a reversible capture medium that is highly efficient yet very inexpensive.

  13. Determination of molecular parameters in asphalts; Determinacao de parametros moleculares em asfaltos

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, C.C.V. [Universidade Federal, Rio de Janeiro, RJ (Brazil); Guilherme, H.C.N.; Goncalves, L.C.; Chrisman, E.C.A.N. [Universidade Federal Rural do Rio de Janeiro, RJ (Brazil)]. E-mail: erikanunes@openlink.com.br; Seidl, P.R. [Universidade Federal Fluminense, Niteroi, RJ (Brazil)]. E-mail: pseidl@eq.ufrj.br

    2003-07-01

    The asphalts, materials of dark color, are constituted of complex mixtures of not volatile hydrocarbons and of raised molecular mass. These are gotten from the oil, that are submitted to the process of distillation in the which light fractions (gasoline, kerosene and gasoleum) are separate of asphalt for vaporization, fractionation and condensation. The product gotten in the deep one of the tower, after the removal of the light components of oil, is called asphalt cement of oil (CAP), which the ambient temperature is half - solid. In this work six different CAP's, called A, B, C, D, E and F had been analyzed, how much its composition and structure of its fraction of asphaltenes, using as extraction method the IP-143. The concern in the analysis of this fraction if bases on the fact of if believing that this is one of the responsible ones for the use of this substance as asphalt blanket. Being thus, the determination of possible pertaining structures to this fraction can allow one better agreement of its commercial application. The texts of asphaltenes gotten in this CAP's had varied of 6 to 12%, with some sufficiently similar results in asphaltene text terms however with well differentiated molecular characteristics defined through analysis for RMN of proton and carbon 13. These different analyses had allowed to correlate the CAP's and esteem given molecular important for posterior studies of molecular modeling. Between them we can showed groups of similarities in the CAP's A, B, and C, and in CAP's D, E and F how much to the text of aliphatic and aromatical totals hydrogens, not observed in the carbon study, where, in some cases, we find distinct similarities only the observed ones for the study of RMN of proton. (author)

  14. Composition of abraded dust from asphalt pavement produced using ferrochromium smelter slag (OKTO-aggregate)

    OpenAIRE

    Makowska, Michalina; Leveinen, Jussi; Pellinen, Terhi; Marjamaa, Riikka

    2015-01-01

    This report describes an investigation that took place at Aalto University commissioned by the Finnish Transport Agency about asphalt dust containing OKTO-aggregate. In the fall of 2013, Finnish newspaper headlines began to raise the issue of the occurrence of damaged timing belts in the Oulu region. It seemed to only concern certain models and was found in the form of a dust. The press reasoned that this "mysterious" dust must have originated from the aggregates abraded from the local Oulu r...

  15. Use of Reclaimed Asphalt Pavement in Conjunction with Ground Improvement: A Case History

    OpenAIRE

    Foye, Kevin C.

    2011-01-01

    The use of Reclaimed Asphalt Pavement (RAP) in lieu of virgin crushed stone aggregate is becoming a widely accepted practice for a number of construction applications, particularly pavement base courses. A number of laboratory RAP studies have considered the mechanical properties of RAP bases in order to support pavement designs incorporating RAP. These studies have revealed a number of interesting relationships between RAP moisture content, compaction, and stiffness. This paper discusses the...

  16. 沥青砂动态剪切蠕变特性%Dynamic shear creep characteristics of asphalt mortar

    Institute of Scientific and Technical Information of China (English)

    王海朋; 张蓉; 张晓华; 毛成; 周水文

    2016-01-01

    为了解沥青砂的复杂力学行为,给沥青混合料细观力学研究提供数据支持,将几种沥青混合料的配合比转变为沥青砂的配比,采用自主研发的沥青砂成型装置及流变仪夹具获取沥青砂的动态剪切蠕变曲线,基于Burgers模型对蠕变曲线进行拟合,获取动态剪切荷载下沥青砂的黏弹性参数,分析黏弹性参数及松弛模量的变化规律。试验结果显示,Burgers模型对沥青砂动态剪切蠕变曲线具有较好的拟合效果。相同加载时间内,相比于AC-20级配沥青混合料,SMA-16级配沥青混合料蠕变变形量更大。橡胶沥青砂的抗剪切蠕变性能最优。沥青砂蠕变变形影响规律与混合料车辙变形一般影响规律相符。试验温度、沥青用量、沥青种类和级配类型均对沥青砂的黏弹性参数和松弛模量影响显著。%To consider the complex mechanical behavior of asphalt mortar and provide the data surpport for asphalt mix-ture micromechanics analysis,several asphalt mixture mixing ratios were transferred into asphalt mortar mixing ratios. Asphalt mortar molding device and discovery hybrid rheometer fixtures developed by ourselves were used to obtain the dynamic shear creep curves.Burgers model was used to fit the creep curves.The viscoelastic parameters of asphalt mor-tar under dynamic shear loading condition were obtained.The changing rules of the viscoelastic parameters and the re-laxation modulus were analyzed.Results showed that Burgers model had good fitting effect on dynamic shear creep curve of asphalt mortar.The creep deformation of SMA-16 corresponding asphalt mortar was larger than AC -20 within the same loading time.Rubber asphalt mortar had the optimal shear creep resistant properties.The asphalt mortar creep deformation had the same influence rules with the general influence rules of asphalt miture rutting deformation. Test temperature,asphalt contant,type of asphalt and aggregate

  17. Performance of Soft Asphalt and Double Otta Seal within First Three Years

    Directory of Open Access Journals (Sweden)

    Audrius Vaitkus

    2016-01-01

    Full Text Available Gravel roads play an important role in the transport infrastructure. However, their maintenance (especially the control of dustiness using chemical dust suppressants is expensive. Besides, the condition of gravel roads results in low driving comfort, longer travelling time, faster vehicle amortization, and so forth. Typically, these problems are solved by paving gravel roads with asphalt wearing layer. However, north countries practice had shown pavement structure high susceptibility to frost due to insufficient thickness of frost resistance layer. The construction of thicker frost resistant layer increases road construction cost by 25% and, in most cases, there is no need to increase bearing capacity by increasing total thickness of pavement structure. In 2012 19 gravel roads were constructed using cost effective rehabilitation technologies—soft asphalt and double Otta Seal in Lithuania. This paper focuses on those two technologies’ performance within first three years of constructed roads exploitation. The implemented experimental research consisted of three parts by evaluating constructed roads base layers bearing capacity; pavement roughness; and pavement distresses and defects. As a result, the acceptable performance indicators were determined for both technologies—soft asphalt and double Otta Seal. Also recommendations for construction and exploitation improvement were defined.

  18. Thermal stability analysis under embankment with asphalt pavement and cement pavement in permafrost regions.

    Science.gov (United States)

    Junwei, Zhang; Jinping, Li; Xiaojuan, Quan

    2013-01-01

    The permafrost degradation is the fundamental cause generating embankment diseases and pavement diseases in permafrost region while the permafrost degradation is related with temperature. Based on the field monitoring results of ground temperature along G214 Highway in high temperature permafrost regions, both the ground temperatures in superficial layer and the annual average temperatures under the embankment were discussed, respectively, for concrete pavements and asphalt pavements. The maximum depth of temperature field under the embankment for concrete pavements and asphalt pavements was also studied by using the finite element method. The results of numerical analysis indicate that there were remarkable seasonal differences of the ground temperatures in superficial layer between asphalt pavement and concrete pavement. The maximum influencing depth of temperature field under the permafrost embankment for every pavement was under the depth of 8 m. The thawed cores under both embankments have close relation with the maximum thawed depth, the embankment height, and the service time. The effective measurements will be proposed to keep the thermal stabilities of highway embankment by the results.

  19. Crack Initiation Assessment of Wearing Course Asphalt Mixtures Using Aggregate Gradation Characteristic

    Directory of Open Access Journals (Sweden)

    Dr. Iman Haryanto

    2007-05-01

    Full Text Available At normal service temperatures, wearing course asphalt mixtures may have ductile cracking. Aggregate gradation characteristic is important to avoid the premature cracking. The present study discusses a relationship between the characteristic of aggregate gradation and crack resistance of wearing course mixtures. Asphalt mixture specimens were prepared using different types of aggregate gradation. The Bailey method was employed in order to recognize the characteristic of aggregate gradations. Notched semi circular bending test was conducted to obtain the critical J integral (Jc. The coarse aggregate (CA ratio and the fine graded fine aggregate coarse (FG FAc ratio defined by the Bailey method were introduced to recognize the effect of aggregate gradation type on Jc. The result was decreasing the Jc value with increasing the CA ratio and FG FAc ratio. Satisfying the current Bailey criterion on the CA ratio for stone mastic asphalt mixtures and setting FG FAc of fine graded HMA mixtures near 0.4 seem useful in order to obtain HMA mixtures with a high Jc. The present study also discusses spherical aggregates assembly models as an aid to illustrate development of the aggregates interlocking, which influences to the cracking.

  20. ASSESSING THE CHEMICAL PROPERTIES OF DAMMAR ASPHALT USING FOURIER TRANSFORM INFRARED SPECTROSCOPY

    Directory of Open Access Journals (Sweden)

    Ary Setyawan

    2016-03-01

    Full Text Available Dammar Asphalt (Daspal is expected to be used as a bio-asphalt renewable binder for road construction. It is made with a modification of the "Jabung", which is the dammar gum based material mixed with grounded red brick debris and low quality cooking oil at a certain ratio. Dammar gum is obtained from the Dipterocarpaceae family of trees in India and East Asia, most are produced by tapping trees. The gum varies in color from clear to pale yellow. Dammar gum is a triterpenoid resin, containing a large number of triterpenes and their oxidation products. Many of them are low molecular weight compounds. The objective of this research is to analyze the chemical properties of Daspal uses a Resonance Fourier Transform Infrared Spectroscopy (FTIR method to compare with conventional asphalt. The investigation using spectral data showed that all types of Daspal have similar functional groups of Saturate, Aromatic, Resins, and Asphalten as the 60/70 penetration conventional bitumen, so that based on its chemical properties Daspal can be considered as bioaspal.