WorldWideScience

Sample records for ashes

  1. EDU 626 ASH

    OpenAIRE

    NARESH 40 course tutorial/tutorialoutlet

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com     Product Description EDU 626 Week 1 Research Topic (Ash) EDU 626 Week 2 Annotated Bibliography (Ash) EDU 626 Week 2 Critical Thinking Questions (Ash) EDU 626 Week 3 Procedures or Methods (Ash) EDU 626 Week 4 Critical Thinking Questions (Ash) EDU 626 Week 5 Critical Thinking Questions (Ash) EDU 626 Week 6 Final Paper (Ash)  

  2. ASH MELTING TEMPERATURE PREDICTION FROM CHEMICAL COMPOSITION OF BIOMASS ASH

    OpenAIRE

    Holubcik, Michal; Jandacka, Jozef; Malcho, Milan

    2015-01-01

    Solid fuels, including biomass, consist of combustible, ash and water. Ash in fuel is result of reaction of minerals presented in the biomass. Minerals and other different substances which form ash got into biomass during growth. Ash is solid residue resulted from the perfect laboratory combustion of fuel. It is composed of minerals that are present in the fuel. Some species of biomass ash have low ash melting temperature and can cause various problems in combustion boilers. Ash slags and sin...

  3. Fly ash carbon passivation

    Science.gov (United States)

    La Count, Robert B; Baltrus, John P; Kern, Douglas G

    2013-05-14

    A thermal method to passivate the carbon and/or other components in fly ash significantly decreases adsorption. The passivated carbon remains in the fly ash. Heating the fly ash to about 500 and 800 degrees C. under inert gas conditions sharply decreases the amount of surfactant adsorbed by the fly ash recovered after thermal treatment despite the fact that the carbon content remains in the fly ash. Using oxygen and inert gas mixtures, the present invention shows that a thermal treatment to about 500 degrees C. also sharply decreases the surfactant adsorption of the recovered fly ash even though most of the carbon remains intact. Also, thermal treatment to about 800 degrees C. under these same oxidative conditions shows a sharp decrease in surfactant adsorption of the recovered fly ash due to the fact that the carbon has been removed. This experiment simulates the various "carbon burnout" methods and is not a claim in this method. The present invention provides a thermal method of deactivating high carbon fly ash toward adsorption of AEAs while retaining the fly ash carbon. The fly ash can be used, for example, as a partial Portland cement replacement in air-entrained concrete, in conductive and other concretes, and for other applications.

  4. Shedding of ash deposits

    DEFF Research Database (Denmark)

    Zbogar, Ana; Frandsen, Flemming; Jensen, Peter Arendt;

    2009-01-01

    Ash deposits formed during fuel thermal conversion and located on furnace walls and on convective pass tubes, may seriously inhibit the transfer of heat to the working fluid and hence reduce the overall process efficiency. Combustion of biomass causes formation of large quantities of troublesome...... ash deposits which contain significant concentrations of alkali, and earth-alkali metals. The specific composition of biomass deposits give different characteristics as compared to coal ash deposits, i.e. different physical significance of the deposition mechanisms, lower melting temperatures, etc....... Low melting temperatures make straw ashes especially troublesome, since their stickiness is higher at lower temperatures, compared to coal ashes. Increased stickiness will eventually lead to a higher collection efficiency of incoming ash particles, meaning that the deposit may grow even faster...

  5. HIS 204 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    JOHN

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   HIS 204 Week 1 DQ 1 (Ash) HIS 204 Week 1 DQ 2 (Ash) HIS 204 Week 1 Quiz (Ash) HIS 204 Week 2 DQ 1 (Ash) HIS 204 Week 2 DQ 2 (Ash) HIS 204 Week 2 Quiz (Ash) HIS 204 Week 3 Assignment Women Right, Sacrifices & Independence (Ash) HIS 204 Week 3 DQ 1 (Ash) HIS 204 Week 3 DQ 2 (Ash) HIS 204 Week 4 DQ 1 (Ash) HIS 204 Week 4 DQ 2 (Ash) HIS 204 Week 4 Quiz (Ash) HIS 204 Week 5 DQ 1 (Ash) ...

  6. Fusion characterization of biomass ash

    DEFF Research Database (Denmark)

    Ma, Teng; Fan, Chuigang; Hao, Lifang;

    2016-01-01

    The ash fusion characteristics are important parameters for thermochemical utilization of biomass. In this research, a method for measuring the fusion characteristics of biomass ash by Thermo-mechanical Analyzer, TMA, is described. The typical TMA shrinking ratio curve can be divided into two...... stages, which are closely related to ash melting behaviors. Several characteristics temperatures based on the TMA curves are used to assess the ash fusion characteristics. A new characteristics temperature, Tm, is proposed to represent the severe melting temperature of biomass ash. The fusion...... characteristics of six types of biomass ash have been measured by TMA. Compared with standard ash fusibility temperatures (AFT) test, TMA is more suitable for measuring the fusion characteristics of biomass ash. The glassy molten areas of the ash samples are sticky and mainly consist of K-Ca-silicates....

  7. Melting and Sintering of Ashes

    DEFF Research Database (Denmark)

    Hansen, Lone Aslaug

    1997-01-01

    of melt in the investigated ashes has been determined as a function of temperature. Ash fusion results have been correlated to the chemical and mineralogical composition of the ashes, to results from a standard ash fusion test and to results from sintering experiments. Furthermore, the ash fusion results...... straw combustion are characterised by a large fraction of KCl and a smaller fraction of K-, Ca-, Al-silicates and quartz. The salt part of these ashes melt in the temperature range from 600-750°C, whereas the silicate part predominantly melts between 1000 and 1200°C. Increasing salt (KCl) content...... in the ashes lead to increased melt fractions in the temperature range 600-750°C.b) Bottom ashes from straw combustion consist purely of silicates, with varying ratios of the quite refractory Al-silicates and quartz to the less refractory K- and Ca-silicates. Bottom ashes melt in the temperature range 800...

  8. MAT 126 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    stylia

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MAT 126 Week 1 DQ 1 (Ash) MAT 126 Week 1 Quiz (Ash) MAT 126 Week 1 Written Assignment (Arithmetic and geometric sequence) (Ash) MAT 126 Week 2 DQ 1 (Ash) MAT 126 Week 2 DQ 2 (Ash) MAT 126 Week 2 Assignment Is It Fat Free (Ash) MAT 126 Week 2 Quiz (Ash) MAT 126 Week 3 DQ 1 (Ash) MAT 126 Week 3 DQ 2 (Ash) MAT 126 Week 3 Assignment Quadratic Equations (Ash) MAT 126 Week 3 Quiz (Ash) MAT 126...

  9. Electrodialytic treatment of fly ash

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Pedersen, Anne Juul; Kirkelund, Gunvor Marie; Ottosen, Lisbeth M.

    Heavy metals are removed from the fly ashes by an electrodialytic treatment with the aim of up-grading the ashes for reuse in stead of disposal in landfill.A great potential for upgrading of bio- and waste incineration ashes by electrodialytic treatment exists. In the future, the applicability of...

  10. ASH and NASH.

    Science.gov (United States)

    Scaglioni, F; Ciccia, S; Marino, M; Bedogni, G; Bellentani, S

    2011-01-01

    Non-alcoholic steatohepatitis (NASH) and alcoholic steatohepatitis (ASH) have a similar pathogenesis and histopathology but a different etiology and epidemiology. NASH and ASH are advanced stages of non-alcoholic fatty liver disease (NAFLD) and alcoholic fatty liver disease (AFLD). NAFLD is characterized by excessive fat accumulation in the liver (steatosis), without any other evident causes of chronic liver diseases (viral, autoimmune, genetic, etc.), and with an alcohol consumption ≤20-30 g/day. On the contrary, AFLD is defined as the presence of steatosis and alcohol consumption >20-30 g/day. The most common phenotypic manifestations of primary NAFLD/NASH are overweight/obesity, visceral adiposity, type 2 diabetes, hypertriglyceridemia and hypertension. The prevalence of NAFLD in the general population in Western countries is estimated to be 25-30%. The prevalence and incidence of NASH and ASH are not known because of the impossibility of performing liver biopsy in the general population. Up to 90% of alcoholics have fatty liver, and 5-15% of these subjects will develop cirrhosis over 20 years. The risk of cirrhosis increases to 30-40% in those who continue to drink alcohol. About 10-35% of alcoholics exhibit changes on liver biopsy consistent with alcoholic hepatitis. Natural histories of NASH and ASH are not completely defined, even if patients with NASH have a reduced life expectancy due to liver-related death and cardiovascular diseases. The best treatment of AFLD/ASH is to stop drinking, and the most effective first-line therapeutic option for NAFLD/NASH is non-pharmacologic lifestyle interventions through a multidisciplinary approach including weight loss, dietary changes, physical exercise, and cognitive-behavior therapy. PMID:21734385

  11. MGT 330 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    alfoniz

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MGT 330 Week 1 Individual Assignment Functions of Management Paper (Ash) MGT 330 Week 1 DQ 1 (Ash) MGT 330 Week 1 DQ 2 (Ash) MGT 330 Week 1 DQ 3 (Ash) MGT 330 Week 1 Summary (Ash) MGT 330 Week 2 Team Assignment External Internal Factors Paper (Ash) MGT 330 Week 2 Individual Assignment Delegation (Ash) MGT 330 Week 2 Summary (Ash) MGT 330 Week 2 DQ 1 (Ash) MGT 330 Week 2 DQ 2 (Ash) MGT 330 W...

  12. Ash Properties of Alternative Biomass

    DEFF Research Database (Denmark)

    Capablo, Joaquin; Jensen, Peter Arendt; Pedersen, Kim Hougaard;

    2009-01-01

    The ash behavior during suspension firing of 12 alternative solid biofuels, such as pectin waste, mash from a beer brewery, or waste from cigarette production have been studied and compared to wood and straw ash behavior. Laboratory suspension firing tests were performed on an entrained flow...... reactor and a swirl burner test rig, with special emphasis on the formation of fly ash and ash deposit. Thermodynamic equilibrium calculations were performed to support the interpretation of the experiments. To generalize the results of the combustion tests, the fuels are classified according to fuel ash...... analysis into three main groups depending upon their ash content of silica, alkali metal, and calcium and magnesium. To further detail the biomass classification, the relative molar ratio of Cl, S, and P to alkali were included. The study has led to knowledge on biomass fuel ash composition influence on...

  13. MAT 221 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    mirat

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MAT 221 Week 1 Assignment 1 Simplifying Expressions (Ash) MAT 221 Week 1 DQ 1 Evaluating Algebraic Expressions (Ash) MAT 221 Week 2 Assignment 2 Inequalities (Ash) MAT 221 Week 2 DQ 1 Formulas (Ash) MAT 221 Week 3 Assignment 3 Two-Variable Inequality (Ash) MAT 221 Week 3 DQ 1 Parallel and Perpendicular (Ash) MAT 221 Week 4 Assignment 4 Financial Polynomials (Ash) MAT 221 Week 4 DQ 1 Initial Investme...

  14. Incineration ash conditioning processes

    International Nuclear Information System (INIS)

    Incinerable wastes consist of the following standard composition corresponding to projected wastes from a future mixed oxide fuel fabrication plant with an annual throughput of 1700 kg (i.e. 5.7 m3) of ashes produced by the incineration facility: . 50% polyvinyl chloride (glove box sleeves), . 5% polyethylene (bags), . 35% rubber (equal amounts of latex and neoprene), . 10% cellulose (equal amounts of cotton and cleansing tissues). The work focused mainly on compaction by high-temperature isostatic pressing, is described in some detail with the results obtained. An engineering study was also carried out to compare this technology with two other ash containment processes: direct-induction (cold crucible) melting and cement-resin matrix embedding. Induction melting is considerably less costly than isostatic pressing; the operating costs are about 1.5 times higher than for cement-resin embedding, but the volume reduction is nearly 3 times greater

  15. Volcanic ash melting under conditions relevant to ash turbine interactions.

    Science.gov (United States)

    Song, Wenjia; Lavallée, Yan; Hess, Kai-Uwe; Kueppers, Ulrich; Cimarelli, Corrado; Dingwell, Donald B

    2016-01-01

    The ingestion of volcanic ash by jet engines is widely recognized as a potentially fatal hazard for aircraft operation. The high temperatures (1,200-2,000 °C) typical of jet engines exacerbate the impact of ash by provoking its melting and sticking to turbine parts. Estimation of this potential hazard is complicated by the fact that chemical composition, which affects the temperature at which volcanic ash becomes liquid, can vary widely amongst volcanoes. Here, based on experiments, we parameterize ash behaviour and develop a model to predict melting and sticking conditions for its global compositional range. The results of our experiments confirm that the common use of sand or dust proxy is wholly inadequate for the prediction of the behaviour of volcanic ash, leading to overestimates of sticking temperature and thus severe underestimates of the thermal hazard. Our model can be used to assess the deposition probability of volcanic ash in jet engines. PMID:26931824

  16. Volcanic ash melting under conditions relevant to ash turbine interactions

    Science.gov (United States)

    Song, Wenjia; Lavallée, Yan; Hess, Kai-Uwe; Kueppers, Ulrich; Cimarelli, Corrado; Dingwell, Donald B.

    2016-03-01

    The ingestion of volcanic ash by jet engines is widely recognized as a potentially fatal hazard for aircraft operation. The high temperatures (1,200-2,000 °C) typical of jet engines exacerbate the impact of ash by provoking its melting and sticking to turbine parts. Estimation of this potential hazard is complicated by the fact that chemical composition, which affects the temperature at which volcanic ash becomes liquid, can vary widely amongst volcanoes. Here, based on experiments, we parameterize ash behaviour and develop a model to predict melting and sticking conditions for its global compositional range. The results of our experiments confirm that the common use of sand or dust proxy is wholly inadequate for the prediction of the behaviour of volcanic ash, leading to overestimates of sticking temperature and thus severe underestimates of the thermal hazard. Our model can be used to assess the deposition probability of volcanic ash in jet engines.

  17. Ashes for organic farming

    OpenAIRE

    Kousa, T.; Heinonen, M; Suoniitty, T.; Peltonen, K

    2013-01-01

    Nowadays only eight percent of the cultivated field area is used for organic farming. The Ministry of Agriculture and Forestry has published the guidelines for the program of organic farming to diversify the supply and the consumption of organic food. The aim is to increase organically arable land to 20% by the year 2020.The demand of organic fertilizer products is strongly increasing. Interest in forestry by-products (ash, bark, zero fiber, etc.) for use in organic production has recently be...

  18. Ash Management Review—Applications of Biomass Bottom Ash

    Directory of Open Access Journals (Sweden)

    Harpuneet S. Ghuman

    2012-10-01

    Full Text Available In industrialized countries, it is expected that the future generation of bioenergy will be from the direct combustion of residues and wastes obtained from biomass. Bioenergy production using woody biomass is a fast developing application since this fuel source is considered to be carbon neutral. The harnessing of bioenergy from these sources produces residue in the form of ash. As the demand for bioenergy production increases, ash and residue volumes will increase. Major challenges will arise relating to the efficient management of these byproducts. The primary concerns for ash are its storage, disposal, use and the presence of unburned carbon. The continual increase in ash volume will result in decreased ash storage facilities (in cases of limited room for landfill expansion, as well as increased handling, transporting and spreading costs. The utilization of ash has been the focus of many studies, hence this review investigates the likely environmental and technological challenges that increased ash generation may cause. The presence of alkali metals, alkaline earth metals, chlorine, sulphur and silicon influences the reactivity and leaching to the inorganic phases which may have significant impacts on soils and the recycling of soil nutrient. Discussed are some of the existing technologies for the processing of ash. Unburned carbon present in ash allows for the exploration of using ash as a fuel. The paper proposes sieve fractionation as a suitable method for the separation of unburnt carbon present in bottom ash obtained from a fixed-bed combustion system, followed by the application of the gasification technology to particle sizes of energy importance. It is hoped that this process will significantly reduce the volume of ash disposed at landfills.

  19. Melting Behavior of Volcanic Ash relevant to Aviation Ash Hazard

    Science.gov (United States)

    Song, W.; Hess, K.; Lavallee, Y.; Cimarelli, C.; Dingwell, D. B.

    2013-12-01

    Volcanic ash is one of the major hazards caused by volcanic eruptions. In particular, the threat to aviation from airborne volcanic ash has been widely recognized and documented. In the past 12 years, more than 60 modern jet airplanes, mostly jumbo jets, have been damaged by drifting clouds of volcanic ash that have contaminated air routes and airport facilities. Seven of these encounters are known to have caused in-flight loss of engine power to jumbo jets carrying a total of more than 2000 passengers. The primary cause of engine thrust loss is that the glass in volcanic ash particles is generated at temperatures far lower than the temperatures in the combustion chamber of a jet engine ( i.e. > 1600 oC) and when the molten volcanic ash particles leave this hottest section of the engine, the resolidified molten volcanic ash particles will be accumulated on the turbine nozzle guide vanes, which reduced the effective flow of air through the engine ultimately causing failure. Thus, it is essential to investigate the melting process and subsequent deposition behavior of volcanic ash under gas turbine conditions. Although few research studies that investigated the deposition behavior of volcanic ash at the high temperature are to be found in public domain, to the best our knowledge, no work addresses the formation of molten volcanic ash. In this work, volcanic ash produced by Santiaguito volcano in Guatemala in November 8, 2012 was selected for study because of their recent activity and potential hazard to aircraft safety. We used the method of accessing the behavior of deposit-forming impurities in high temperature boiler plants on the basis of observations of the change in shape and size of a cylindrical coal ash to study the sintering and fusion phenomena as well as determine the volcanic ash melting behavior by using characteristic temperatures by means of hot stage microscope (HSM), different thermal analysis (DTA) and Thermal Gravimetric Analysis (TGA) to

  20. INF 325 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    SINDHU

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com INF 325 Week 1 DQ 1 Network Management (Ash) INF 325 Week 1 DQ 2 Ethernet Network (Ash) INF 325 Week 1 Commercial Internet Expansion (Ash) INF 325 Week 2 DQ 1 UTP Cord Problem (Ash) INF 325 Week 2 DQ 2 Managed Switches (Ash) INF 325 Week 2 Leased Lines (Ash) INF 325 Week 3 DQ 1 WPA (Ash) INF 325 Week 3 DQ 2 Remote Access Management (Ash) INF 325 Week 3 Mobile Service (Ash) INF 325 Week 4 DQ 1 Ro...

  1. INF 336 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    MADURA

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com INF 336 Week 1 DQ 1 Risk Management (Ash) INF 336 Week 1 DQ 2 Organizational Structure (Ash) INF 336 Week 2 DQ 1 Supply Process Improvements (Ash) INF 336 Week 2 DQ 2 Outsourcing (Ash) INF 336 Week 2 Assignment Article Review (Ash) INF 336 Week 3 DQ 1 Capital Goods (Ash) INF 336 Week 3 DQ 2 Quality (Ash) INF 336 Week 3 Assignment Need Definition (Ash) INF 336 Week 4 DQ 1 Procuring Services (Ash) ...

  2. MGT 401 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    kennith

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MGT 401 Week 1 Individual Assignment Strategic Management Process Paper (Ash) MGT 401 Week 1 Class Activity Week 1 (Ash) MGT 401 Week 1 DQ 1 (Ash) MGT 401 Week 1 DQ 2 (Ash) MGT 401 Week 2 Learning Team Business Model Comparison Example (Ash) MGT 401 Week 2 DQ 1 (Ash) MGT 401 Week 2 DQ 2 (Ash) MGT 401 Week 2 Class Activity (Ash) MGT 401 Week 3 Individual Assignment Business Plan Evaluation (Ash) ...

  3. INF 410 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    MADHURA

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com     INF 410 Week 1 DQ 1 Project Life Cycle (Ash) INF 410 Week 1 DQ 2 The Importance of Project Management (Ash) INF 410 Week 1 Quiz (Ash) INF 410 Week 2 DQ 1 Project Charter (Ash) INF 410 Week 2 DQ 2 Project Management Plan (Ash) INF 410 Week 2 Quiz (Ash) INF 410 Week 3 DQ 1 Risk Identification (Ash) INF 410 Week 3 DQ 2 Triple Constraint (Ash) INF 410 Week 3 Quiz (Ash) INF 410 Week 4 DQ...

  4. Ash in the Soil System

    Science.gov (United States)

    Pereira, P.

    2012-04-01

    Ash is the organic and inorganic residue produced by combustion, under laboratory and field conditions. This definition is far away to be accepted. Some researchers consider ash only as the inorganic part, others include also the material not completely combusted as charcoal or biochar. There is a need to have a convergence about this question and define clear "what means ash". After the fire and after spread ash onto soil surface, soil properties can be substantially changed depending on ash properties, that can be different according to the burned residue (e.g wood, coal, solid waste, peppermill, animal residues), material treatment before burning, time of exposition and storage conditions. Ash produced in boilers is different from the produced in fires because of the material diferent propertie and burning conditions. In addition, the ash produced in boilers is frequently treated (e.g pelletization, granulation, self curing) previously to application, to reduce the negative effects on soil (e.g rapid increase of pH, mycorrhiza, fine roots of trees and microfauna). These treatments normally reduce the rate of nutrients dissolution. In fires this does not happen. Thus the implications on soil properties are logically different. Depending on the combustion temperature and/or severity, ash could have different physical (e.g texture, wettability) and chemical properties (e.g amount and type of total and leached nutrients) and this will have implications on soil. Ash can increase and decrease soil aggregation, wettablity and water retention, bulk density, runoff and water infiltration. Normally, ash increases soil pH, Electrical Conductivity, and the amount of some basic nutrients as calcium, magnesium, sodium and potassium. However it is also a potential source of heavy metals, especially if ash pH is low. However the effect of ash on soil in space and time depends especially of the ash amount and characteristics, fire temperature, severity, topography, aspect

  5. Electrodialytic treatment of fly ash

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Pedersen, Anne Juul; Kirkelund, Gunvor Marie;

    Heavy metals are removed from the fly ashes by an electrodialytic treatment with the aim of up-grading the ashes for reuse in stead of disposal in landfill.A great potential for upgrading of bio- and waste incineration ashes by electrodialytic treatment exists. In the future, the applicability of...... the treated products for reuse in construction or farming sectors should be explored further, as should the possibility of recycling of valuable, extracted elements in the metallurgical industry....

  6. Classification of pulverized coal ash

    International Nuclear Information System (INIS)

    The leachability of fifty different pulverized coal ashes from utilities in the Netherlands, Federal Republic of Germany and Belgium has been studied. Five different ashes were analyzed according to the complete standard leaching test and the results were published earlier. The examination of a wide variety of ashes under a wide range of pH and Liquid to Solid ratio (LS) conditions creates the possibility of identifying systematic trends in fly ash leaching behaviour and to identify the mechanisms controlling release. 16 figs., 2 tabs., 3 app., 25 refs

  7. Dielectric properties of fly ash

    Indian Academy of Sciences (India)

    S C Raghavendra; R L Raibagkar; A B Kulkarni

    2002-02-01

    This paper reports the dielectric properties of fly ash. The dielectric measurements were performed as a function of frequency and temperature. The sample of fly ash shows almost similar behaviour in the frequency and temperature range studied. The large value of dielectric constant in the typical frequency range is because of orientation polarization and tight binding force between the ions or atoms in the fly ash. The sample of fly ash is of great scientific and technological interest because of its high value of dielectric constant (104).

  8. Can ash clog soil pores?

    Science.gov (United States)

    Stoof, Cathelijne; Stoof, Cathelijne; Gevaert, Anouk; Gevaert, Anouk; Baver, Christine; Baver, Christine; Hassanpour, Bahareh; Hassanpour, Bahareh; Morales, Veronica; Morales, Veronica; Zhang, Wei; Zhang, Wei; Martin, Deborah; Martin, Deborah; Steenhuis, Tammo; Steenhuis, Tammo

    2015-04-01

    Wildfire can greatly increase a landscape's vulnerability to flooding and erosion events, and ash is thought to play a large role in controlling runoff and erosion processes after wildfire. Although ash can store rainfall and thereby reduce runoff and erosion for a limited period after wildfires, it has also been hypothesized to clog soil pores and reduce infiltration. Several researchers have attributed the commonly observed increase in runoff and erosion after fire to the potential pore-clogging effect of ash. Evidence is however incomplete, as to date, research has solely focused on identifying the presence of ash in the soil, with the actual flow processes associated with the infiltration and pore-clogging of ash remaining a major unknown. In several laboratory experiments, we tested the hypothesis that ash causes pore clogging to the point that infiltration is hampered and ponding occurs. We first visualized and quantified pore-scale infiltration of water and ash in sand of a range of textures and at various infiltration rates, using a digital bright field microscope capturing both photo and video. While these visualization experiments confirm field and lab observation of ash washing into soil pores, we did not observe any clogging of pores, and have not been able to create conditions for which this does occur. Additional electrochemical analysis and measurement of saturated hydraulic conductivity indicate that pore clogging by ash is not plausible. Electrochemical analysis showed that ash and sand are both negatively charged, showing that attachment of ash to sand and any resulting clogging is unlikely. Ash also had quite high saturated conductivity, and systems where ash was mixed in or lying on top of sand had similarly high hydraulic conductivity. Based on these various experiments, we cannot confirm the hypothesis that pore clogging by ash contributes to the frequently observed increase in post-fire runoff, at least for the medium to coarse sands

  9. Reducing carbon-in-ash

    Energy Technology Data Exchange (ETDEWEB)

    Nigel S. Dong [IEA Clean Coal Centre, London (United Kingdom)

    2010-05-15

    High levels of carbon-in-ash lead to reduced power plant efficiency and higher fuel costs, degrade the performance of electrostatic precipitators and increase emissions of particulates. Increased carbon levels in the fly ash can lead to problems with ash use in cement/concrete production. This report reviews current measures and technologies that can be used to prevent excessive carbon-in-ash in pulverised coal combustion (PCC) power plants. These include coal cleaning, coal fineness improvement, reduction of distribution imbalance of coal among burners, increasing coal-air mixing rates at both burner and OFA levels and optimising excess air ratios. A plasma-assisted combustion enhancement technology can help achieve better ignition and more stable flame for coals that are normally difficult to burn. Computer-based combustion optimisation using expert systems, neural network systems and coal combustion simulation is becoming an invaluable means to tackle the carbon-in-ash issue. This report also reviews the regulations in nine major coal-consuming countries, which stipulate the maximum unburnt carbon levels permitted for fly ash for use in concrete/cement production. The Loss on Ignition (LOI) parameter is used in all national standards, although it is considered inadequate and may exclude some usable fly ash from being utilised. Performance-based regulations are more appropriate and have been adopted by Canada and USA. The EU and Canada now permit the use of fly ash produced from co-combustion of coal and biomass. China and Russia allow very high LOI levels for certain fly ash but the other countries require similar LOI limits for fly ash for use in concrete. Finally, this report discusses measures and technologies for reduction of carbon-in-ash, including classification, froth flotation, triboelectrostatic separators, thermal processes and carbon surface modification. 146 refs., 19 figs., 15 tabs.

  10. Fly ash quality and utilization

    Energy Technology Data Exchange (ETDEWEB)

    Barta, L.E.; Lachner, L.; Wenzel, G.B. [Inst. for Energy, Budapest (Hungary); Beer, M.J. [Massachusetts Inst. of Technology, Cambridge, MA (United States)

    1995-12-01

    The quality of fly ash is of considerable importance to fly ash utilizers. The fly ash puzzolanic activity is one of the most important properties that determines the role of fly ash as a binding agent in the cementing process. The puzzolanic activity, however is a function of fly ash particle size and chemical composition. These parameters are closely related to the process of fly ash formation in pulverized coal fired furnaces. In turn, it is essential to understand the transformation of mineral matter during coal combustion. Due to the particle-to-particle variation of coal properties and the random coalescence of mineral particles, the properties of fly ash particles e.g. size, SiO{sub 2} content, viscosity can change considerably from particle to particle. These variations can be described by the use of the probability theory. Since the mean values of these randomly changing parameters are not sufficient to describe the behavior of individual fly ash particles during the formation of concrete, therefore it is necessary to investigate the distribution of these variables. Examples of these variations were examined by the Computer Controlled Scanning Electron Microscopy (CCSEM) for particle size and chemical composition for Texas lignite and Eagel Butte mineral matter and fly ash. The effect of combustion on the variations of these properties for both the fly ash and mineral matter were studied by using a laminar flow reactor. It is shown in our paper, that there are significant variations (about 40-50% around the mean values) of the above-listed properties for both coal samples. By comparing the particle size and chemical composition distributions of the mineral matter and fly ash, it was possible to conclude that for the Texas lignite mineral matter, the combustion did not effect significantly the distribution of these properties, however, for the Eagel Butte coal the combustion had a major impact on these mineral matter parameters.

  11. Measurement of natural activity in peat ashes

    International Nuclear Information System (INIS)

    High proportions of radioactive materials in peat ashes may involve radiation hazards during handling and deposition of these waste materials. Measurements have been performed to determine the content of radioactive materials in ashes from peat burning. The activities in fly ash and ''solid'' ash in seven peat-fired power plants in Sweden are presented. The methods of analysing and measuring peat ashes for activity from different radionuclides are described. The activity levels in ash samples are given

  12. BUS 611 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 611 Week 1 Assignment Article Review (Ash Course) BUS 611 Week 2 Assignment Project Risk (Ash Course) BUS 611 Week 3 Assignment WBS (Ash Course) BUS 611 Week 4 Assignment Integrated Project Management Tools (Ash Course) BUS 611 Week 5 Assignment Monthly Status Reports (Ash Course) BUS 611 Week 6 Final Research Paper (Ash Course)  

  13. ECO 316(ASH) course tutorial/tutorialoutlet

    OpenAIRE

    naresh 1

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   ECO 316 Week 1 DQ 1 Should You Invest Short Term (Ash) ECO 316 Week 1 DQ 2 Treasury Inflation Protection Bonds (Ash) ECO 316 Week 1 Quiz (Chapter 1-6) (Ash) ECO 316 Week 2 DQ 1 New Product, Will I Be Rich (Ash) ECO 316 Week 2 DQ 2 Mutual Fund Regulation (Ash) ECO 316 Week 2 Quiz (Chapter 7-12) (Ash) ECO 316 Week 3 DQ 1 Exchange Rate Risk (Ash) ECO 316 Week 3 DQ 2 Should I Expect a Bail Out (Ash) ...

  14. CRJ 303 ASH course tutorial/tutorialoutlet

    OpenAIRE

    naresh 1

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   Product Description CRJ 303 Week 1 DQ 1 Goals of Sentencing (Ash) CRJ 303 Week 1 DQ 2 Sentencing Techniques (Ash) CRJ 303 Week 2 DQ 1 Punishment (Ash) CRJ 303 Week 2 DQ 2 Privatizing Prisons (Ash) CRJ 303 Week 2 Assignment Jails vs. Prisons (Ash) CRJ 303 Wee 3 DQ 1 Probation and Parole (Ash) CRJ 303 Week 3 DQ 2 Civil Commitments (Ash) CRJ 303 Week 3 Assignment Juvenile Detainees (Ash) CRJ 303...

  15. PSY 496 ASH Tutorial Course / Uoptutorial

    OpenAIRE

    John Allen

    2015-01-01

    PSY 496 Week 1 Assignment Foundations for the Final Paper (Ash) PSY 496 Week 2 Assignment Finalized Resources and Revisions for the Final Paper (Ash) PSY 496 Week 1 DQ 1 Approaches to Research (Ash) PSY 496 Week 1 DQ 2 Measuring Change (Ash) PSY 496 Week 2 DQ 1 Protecting Participants from Harm (Ash) PSY 496 Week 2 DQ 2 Areas of Competence (Ash) PSY 496 Week 2 Journal Ethics in Research and Practice (Ash) PSY 496 Week 3 Assignment Final Paper Draft (Ash) PSY 49...

  16. MGT 415 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    kennith archi

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MGT 415 Week 1 DQ 1 Organizational Design (Ash) MGT 415 Week 1 DQ 2 The Research Project (Ash) MGT 415 Week 2 DQ 1 Group Development Process (Ash) MGT 415 Week 2 DQ 2 Influence of Informal Groups (Ash)  MGT 415 Week 3 DQ 1 Group Cohesion and Productivity (Ash) MGT 415 Week 3 DQ 2 Norms and Conformity (Ash) MGT 415 Week 3 Assignment Best Workplace (Ash) MGT 415 Week 4 DQ 1 Group Decisions (Ash) ...

  17. HIS 103 ASH course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   HIS 103 Week 1 DQ 1 (Transition to Agriculture) (Ash) HIS 103 Week 1 DQ 2 (Early Complex Societies) (Ash) HIS 103 Week 1 Quiz (Ash) HIS 103 Week 1 Assignment (Ash) HIS 103 Week 2 Assignment Greco Roman Influence Paper (Ash) HIS 103 Week 2 DQ 1 Chinese Social and Political Order Systems (Ash) HIS 103 Week 2 DQ 2 Caste System (Ash) HIS 103 Week 2 Quiz (Ash) HIS 103 Week 3 Assignment Black Death Dra...

  18. MAT 222 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    mirat

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MAT 222 Week 1 Solving Proportions (Ash) MAT 222 Week 1 DQ 1 Can't Cancel Terms (Ash) MAT 222 Week 2 DQ 1 One-Variable Compound Inequalities (Ash) MAT 222 Week 2 Two-Variable Inequalities (Ash) MAT 222 Week 3 DQ 1 Simplifying Radicals (Ash) MAT 222 Week 3 Real World Radical Formulas (Ash) MAT 222 Week 4 DQ 1 Solving Quadratic Equations (Ash) MAT 222 Week 4 Real World Quadratic Functions (Ash) ...

  19. BUS 642 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    www.uophelp.com     BUS 642 Week 1 DQ 1 Scientific Thinking (Ash Course) BUS 642 Week 1 DQ 2 Making Research Decisions (Ash Course) BUS 642 Week 1 Exercises (Ash Course) BUS 642 Week 2 DQ 1 Ethics in Business Research (Ash Course) BUS 642 Week 2 DQ 2 Design of Research (Ash Course) BUS 642 Week 2 Exercises (Ash Course) BUS 642 Week 3 DQ 1 Measurement Scales (Ash Course) BUS 642 Week 3 DQ 2 Clarifying the Research Questions (Ash Course) BUS...

  20. Leaching from biomass combustion ash

    DEFF Research Database (Denmark)

    Maresca, Alberto; Astrup, Thomas Fruergaard

    2014-01-01

    water. The content of the selected heavy metals (i.e. Cr, Ni, Pb and Cd) complied with the Danish Statutory Order on the use of bio-ash for agricultural purposes; however, critical releases of Cr were detected in the leachate extracts, especially in the fly ash. High alkaline pHs were measured in all...

  1. Volcanic ash - Terrestrial versus extraterrestrial

    Science.gov (United States)

    Okeefe, J. A.

    1976-01-01

    A principal difference between terrestrial and extraterrestrial lavas may consist in the greater ability of terrestrial lavas to form thin films (like those of soap bubbles) and hence foams. It would follow that, in place of the pumice and spiny shards found in terrestrial volcanic ash, an extraterrestrial ash should contain minute spherules. This hypothesis may help to explain lunar microspherules.

  2. Using fly ash for construction

    Energy Technology Data Exchange (ETDEWEB)

    Valenti, M.

    1995-05-01

    Each year electrical utilities generate 80 million tons of fly ash, primarily from coal combustion. Typically, utilities dispose of fly ash by hauling it to landfills, but that is changing because of the increasing cost of landfilling, as well as environmental regulations. Now, the Electric Power Research Institute (EPRI), in Palo Alto, Calif., its member utilities, and manufacturers of building materials are finding ways of turning this energy byproduct into the building blocks of roads and structures by converting fly ash into construction materials. Some of these materials include concrete and autoclaved cellular concrete (ACC, also known as aerated concrete), flowable fill, and light-weight aggregate. EPRI is also exploring uses for fly ash other than in construction materials. One of the more high-end uses for the material is in metal matrix composites. In this application, fly ash is mixed with softer metals, such as aluminum and magnesium, to strengthen them, while retaining their lighter weight.

  3. 49 CFR 230.69 - Ash pans.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Ash pans. 230.69 Section 230.69 Transportation... TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Ash Pans § 230.69 Ash pans. Ash pans shall be securely supported from mud-rings or frames with no part less than...

  4. BUS 620 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 620 Week 1 DQ 1 What is Marketing (Ash Course) BUS 620 Week 1 DQ 2 Marketing Strategies (Ash Course) BUS 620 Week 1 The Future of the New York Times (Ash Course) BUS 620 Week 2 DQ 1 Buyer Behavior (Ash Course) BUS 620 Week 2 DQ 2 Customer Needs (Ash Course) BUS 620 Week 2 Industry Forecasting (Ash Course) BUS 620 Week 3 DQ 1 Braining Nordstrom (Ash Course) BUS 620 Week 3 DQ 2 Marketing Segmentat...

  5. GEN 499 ASH course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com       GEN 499 Week 1 DQ 1 Final Research Paper Topic and Plan (Ash) GEN 499 Week 1 DQ 2 Social Media (Ash) GEN 499 Week 2 DQ 1 Professional Resume and Cover Letter (Ash) GEN 499 Week 2 Assignment Critiquing Internet Sources (Ash) GEN 499 Week 3 DQ 1 Social Capital (Ash) GEN 499 Week 3 DQ 2 Federal Policy (Ash) GEN 499 Week 3 Assignment Annotated Bibliography (Ash) GEN 499 Week 4 DQ 1...

  6. BUS 372 ASH Material - bus372dotcom

    OpenAIRE

    lucky108

    2015-01-01

    For more course tutorials visit www.bus372.com       BUS 372 Week 1 DQ 1 The Role of Unionization (Ash Course) BUS 372 Week 1 DQ 2 Meeting Member Needs (Ash Course) BUS 372 Week 2 DQ 1 Profit Interest and Employee Interest (Ash Course) BUS 372 Week 2 DQ 2 Union Requirements (Ash Course) BUS 372 Week 2 Assignment Changing Landscape of Unions (Ash Course) BUS 372 Week 2 Quiz (Ash Course) BUS 372 Week 3 DQ 1 Strikes (Ash Course) BUS ...

  7. EDU 623 ASH COURSE Tutorial/UOPHELP

    OpenAIRE

    dgfvbhn

    2015-01-01

    For more course tutorials visit www.uophelp.com   EDU 623 Week 1 No Child Left Behind (Ash Course) EDU 623 Week 1 DQ 1 Skills Needed for Master of Education (Ash Course) EDU 623 Week 1 DQ 2 Effective Teachers (Ash Course) EDU 623 Week 2 Writing and Researching Skills Self-Assessment (Ash Course) EDU 623 Week 2 DQ 1 Evaluating Research (Ash Course) EDU 623 Week 2 DQ 2 Diversity in Schools (Ash Course) EDU 623 Week 3 Lesson Plan Critique (Ash Course) ...

  8. HCA 375 (ASH) course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com     HCA 375 Week 1 DQ 1 Management versus Leadership (Ash) HCA 375 Week 1 DQ 2 Implementation and Barriers (Ash) HCA 375 Week 2 DQ 1 Measurement (Ash) HCA 375 Week 2 DQ 2 Quality and Outcomes (Ash) HCA 375 Week 2 Assignment Customer Satisfaction and Quality Care (Ash) HCA 375 Week 3 DQ 1 Teamwork in Health Care (Ash) HCA 375 Week 3 DQ 2 The Impact of Nursing (Ash) HCA 375 Week 3 Ass...

  9. HCA 430(ASH) course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   HCA 430 Week 1 DQ 1 Perspective (Ash) HCA 430 Week 1 DQ 2 Trends in Vulnerable Populations (Ash) HCA 430 Week 2 DQ 1 Vulnerable Populations (Ash) HCA 430 Week 2 DQ 2 Resource Availability (Ash) HCA 430 Week 2 DQ 3 Race, Ethnicity, and Healthcare (Ash) HCA 430 Week 2 Assignment Critical Thinking Paper (Ash) HCA 430 Week 3 DQ 1 Continuum of Care (Ash) HCA 430 Week 3 DQ 2 Paying for Healthcar...

  10. ENG 328 ASH course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com     ENG 328 Week 1 DQ 1 What is Technical Writing (Ash) ENG 328 Week 1 DQ 2 Target Audience (Ash) ENG 328 Week 2 DQ 1 Collaborative Writing Process (Ash) ENG 328 Week 2 DQ 2 Design and Graphics (Ash) ENG 328 Week 3 DQ 1 Web Design and Readability (Ash) ENG 328 Week 3 DQ 2 Online Technical Documents (Ash) ENG 328 Week 4 DQ 1 Writing Instructions (Ash) ENG 328 Week 4 DQ 2 Writing Proposa...

  11. EDU 623 ASH COURSES TUTORIAL/UOPHELP

    OpenAIRE

    ROOSER12

    2015-01-01

    For more course tutorials visit www.uophelp.com   EDU 623 Week 1 No Child Left Behind (Ash Course) EDU 623 Week 1 DQ 1 Skills Needed for Master of Education (Ash Course) EDU 623 Week 1 DQ 2 Effective Teachers (Ash Course) EDU 623 Week 2 Writing and Researching Skills Self-Assessment (Ash Course) EDU 623 Week 2 DQ 1 Evaluating Research (Ash Course) EDU 623 Week 2 DQ 2 Diversity in Schools (Ash Course) EDU 623 Week 3 Lesson Plan Critique (Ash Course) ...

  12. NTPC`s experiences in ash utilization

    Energy Technology Data Exchange (ETDEWEB)

    Trehan, A.; Krishnamurthy, R.; Kumar, A. [National Thermal Power Corporation Ltd., New Delhi (India)

    1997-12-31

    India is a major user of coal, and will remain so into the twenty first century. Ash disposal is a considerable problem, and NTPC has devised many methods of using ash, rather than dumping it. Such uses include the raising of ash dykes using coal ash rather than earth; structural fill; reclaiming low lying land; road construction; building materials; in the cement industry; in the asbestos industry; in agriculture; and backfilling in mines. Present and future use of ash is described. 1 tab.

  13. AshMeadowsNaucorid_CH

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — These data identify the areas where final critical habitat for the Ash Meadows Naucorid (Ambrysus amargosus) occur. "Nevada, Nye County. Point of Rocks Springs and...

  14. Conditioning processes for incinerator ashes

    International Nuclear Information System (INIS)

    Three conditioning processes for alpha-bearing solid waste incineration ashes were investigated and compared according to technical and economic criteria: isostatic pressing, cold-crucible direct-induction melting and cement-resin matrix embedding

  15. Fly ash. Quality recycling material

    Energy Technology Data Exchange (ETDEWEB)

    Blomster, D.; Leisio, C.

    1996-11-01

    Imatran Voima`s coal-fired power plants not only generate power and heat but also produce fly ash which is suitable raw material for recycling. This material for recycling is produced in the flue gas cleaning process. It is economical and, thanks to close quality control, is suitable for use as a raw material in the building materials industry, in asphalt production, and in earthworks. Structures made from fly ash are also safe from an environmental point of view. (orig.)

  16. Coal ash utilisation in India

    International Nuclear Information System (INIS)

    Coal based thermal power stations have been the major source of power generation in our country in the past and would continue for decades to come. In India, thermal generation which contributes about 72% of the overall power generation of 2,45,000 MU (1989-90) is the main source of power and mainly based on coal firing. Total ash generation in India presently is to the tune of 38 million tonnes per annum. India is fourth in the world as far as coal ash generation is concerned. USSR is first, (100 million tonnes), then come USA (45 million tonnes) and China (41 million tonnes). The basic problem of thermal power station fired with high ash content coal is the generation of huge quantity of coal ash which would pose serious environmental and other related problems. The present paper analyses the extensive scope of utilisation of coal ash and enlightens the strategies to be adopted to overcome the related problems for proper utilisation of coal ash. (author). 9 tabs

  17. Characterization of ashes from biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, F.J.; Hansen, L.A. [Technical Univ. of Denmark. Dept. of Chemical Engineering (Denmark); Soerensen, H.S. [Geological Survey of Denmark and Greenland (Denmark); Hjuler, K. [dk-TEKNIK. Energy and Environment (Denmark)

    1998-02-01

    One motivation for initiating the present project was that the international standard method of estimating the deposit propensity of solid fuels, of which a number of variants exist (e.g. ISO, ASTM, SD, DIN), has shown to be unsuitable for biomass ashes. This goal was addressed by the development of two new methods for the detection of ash fusibility behaviour based on Simultaneous Thermal Analysis (STA) and High Temperature Light Microscopy (HTLM), respectively. The methods were developed specifically for ashes from biofuels, but are suitable for coal ashes as well. They have been tested using simple salt mixtures, geological standards and samples from straw CHP and coal-straw PF combustion plants. All samples were run in a nitrogen atmosphere at a heating rate of 10 deg. C/min. In comparison with the standard method, the new methods are objective and have superior repeatability and sensitivity. Furthermore, the two methods enable the melting behavior to be characterized by a continuous measurement of melt fraction versus temperature. Due to this two-dimensional resolution of the results, the STA and HTLM methods provide more information than the standard method. The study of bottom ash and fly ash as well as deposit samples from straw test firings at the Haslev and Slagelse Combined Heat and Power plants resulted in a better understanding of mineral behaviour during straw grate firing. In these tests a number of straws were fired which had been carefully selected for having different qualities with respect to sort and potassium and chlorine contents. By studying bottom ashes from Slagelse it was found that the melting behaviour correlated with the deposition rate on a probe situated at the outlet part of the combustion zone. (EG)

  18. EDU 623 ASH course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com     EDU 623 Week 1 No Child Left Behind (Ash Course) EDU 623 Week 1 DQ 1 Skills Needed for Master of Education (Ash Course) EDU 623 Week 1 DQ 2 Effective Teachers (Ash Course) EDU 623 Week 2 Writing and Researching Skills Self-Assessment (Ash Course) EDU 623 Week 2 DQ 1 Evaluating Research (Ash Course) EDU 623 Week 2 DQ 2 Diversity in Schools (Ash Course) EDU 623 Week 3 Lesson Plan Critiqu...

  19. HCA 421(ASH) course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   HCA 421 Week 1 DQ 1 (Basic Strategy) (Ash) HCA 421 Week 1 DQ 2 (Internal Audit of Strategic Assets) (Ash) HCA 421 Week 2 Assignment Competition in Healthcare (Ash) HCA 421 Week 2 DQ 1 (Strategic External Assessment Industry and Competition) (Ash) HCA 421 Week 2 DQ 2 (Market Segments) (Ash) HCA 421 Week 3 Assignment The Future Direction of Health Care (Five challenges) (Ash) HCA 421 Week 3 DQ 1 (Pr...

  20. HCA 415(ASH) course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 34

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   HCA 415 Week 1 DQ 1 Historical Contributions of Public Health (Ash) HCA 415 Week 1 DQ 2 Poverty and Health (Ash) HCA 415 Week 2 DQ 1 U.S. Health Care System Critical Issues (Ash) HCA 415 Week 2 DQ 2 Role of Prevention in Health Status (Ash) HCA 415 Week 2 Assignment Public Health and the Law (Ash) HCA 415 Week 3 DQ 1 Tools for Assessing Community Health (Ash) HCA 415 Week 3 DQ 2 Essential Ser...

  1. Stabilised coal ash studies in Italy

    Energy Technology Data Exchange (ETDEWEB)

    Relini, G.; Dinelli, G.; Sampaolo, A. [Universita di Genova, Genova (Italy). Instituto Zoologica

    1995-06-01

    ENEL ran an experiment at the Torrevaldaliga power plant, near Rome, on the use of coal ash in concrete blocks for artificial habitats. Two reefs were submerged in different tanks with running sea water. The ash blocks consisted of fly ash, bottom ash, hydrated lime and water, while the concrete blocks consisted of pozzolanic cement, sand, and gravel. After two years the ash blocks had, if anything, strengthened, and showed no signs of weathering, volume change or swelling. No significant leaching was discovered either. The fauna and flora of the ash blocks was more luxuriant than that of the concrete blocks as well. 13 refs., 2 figs., 6 tabs.

  2. Characterisation of Turkish fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    Bayat, O. [Cukurova University, Adana (Turkey). Mining Engineering Dept.

    1998-07-01

    The mineralogical, morphological, physical and chemical properties of 7 fly ashes from coal fields in Turkey are compared. The mineral matter in the fly ashes, determined by X-ray diffraction, is dominated by anhydride, lime, quartz and hematite + ferrite spinel. The three low-calcium ashes have the typical, relatively simple, crystalline phase Q, M, H and FS. The high-calcium fly ashes have the most complex assemblage of crystalline phases. The much higher calcium concentrations in these samples result in the formation of lime (CaO), melilite ((Ca, Na){sub 2}(Mg,Al,Fe)(Si,Al){sub 2}O{sub 7}) and merwinite. The presence of anhydride in all samples indicates that the high activity of calcium not only promotes the formation of sulfates from calcite but also the dehydration of gypsum during and after combustion, which occurs at temperatures above 400-500{degree}C. It is important to understand the interaction of high-calcium fly ashes with water occurring in Portland cement (C{sub 3}A,C{sub 2}S), Ah, which hydrates to give gypsum and lime, with the latter hydrating to give the Ca(OH){sub 2} solutions that promote pozzolonic reactions. Some of the particles comprised irregularly formed, vesicular particles with some well-formed individual spheres in Catalagzi and Tuncbilek fly ashes. About 55-80 wt% was less than 45 {mu}m in size for Yatagan, Soma, Yenikoy and Afsin-Elbistan fly ashes. The fly ashes were mainly composed of CaO, SiO{sub 2} and Al{sub 2}O{sub 3}. They have a potential use in wastewater treatment since they can be easily obtained in large quantities at low price or even free. The chemical and mineralogical compositions of the high-calcium Turkish fly ashes investigated make them a good binding agent and a possible substitute for slags, pozzolana and gypsum in the amelioration of clinker. 53 refs., 10 figs., 5 tabs.

  3. Ash in fire affected ecosystems

    Science.gov (United States)

    Pereira, Paulo; Jordan, Antonio; Cerda, Artemi; Martin, Deborah

    2015-04-01

    Ash in fire affected ecosystems Ash lefts an important footprint in the ecosystems and has a key role in the immediate period after the fire (Bodi et al., 2014; Pereira et al., 2015). It is an important source of nutrients for plant recover (Pereira et al., 2014a), protects soil from erosion and controls soil hydrological process as runoff, infiltration and water repellency (Cerda and Doerr, 2008; Bodi et al., 2012, Pereira et al., 2014b). Despite the recognition of ash impact and contribution to ecosystems recuperation, it is assumed that we still have little knowledge about the implications of ash in fire affected areas. Regarding this situation we wanted to improve our knowledge in this field and understand the state of the research about fire ash around world. The special issue about "The role of ash in fire affected ecosystems" currently in publication in CATENA born from the necessity of joint efforts, identify research gaps, and discuss future cooperation in this interdisciplinary field. This is the first special issue about fire ash in the international literature. In total it will be published 10 papers focused in different aspects of the impacts of ash in fire affected ecosystems from several parts of the world: • Fire reconstruction using charcoal particles (Burjachs and Espositio, in press) • Ash slurries impact on rheological properties of Runoff (Burns and Gabet, in press) • Methods to analyse ash conductivity and sorbtivity in the laboratory and in the field (Balfour et al., in press) • Termogravimetric and hydrological properties of ash (Dlapa et al. in press) • Effects of ash cover in water infiltration (Leon et al., in press) • Impact of ash in volcanic soils (Dorta Almenar et al., in press; Escuday et al., in press) • Ash PAH and Chemical extracts (Silva et al., in press) • Microbiology (Barreiro et al., in press; Lombao et al., in press) We believe that this special issue will contribute importantly to the better understanding of

  4. Rising from the ashes: Coal ash in recycling and construction

    Energy Technology Data Exchange (ETDEWEB)

    Naquin, D.

    1998-02-01

    Beneficial Ash Management (BAM, Clearfield, Pa.) has won an environmental award for its use of ash and other waste to fight acid mine drainage. The company`s workers take various waste materials, mainly fly ash from coal-burning plants, to make a cement-like material or grouting, says Ernest Roselli, BAM president. The grouting covers the soil, which helps prevent water from contacting materials. This, in turn, helps control chemical reactions, reducing or eliminating formation of acid mine drainage. The company is restoring the 1,400-acre Bark Camp coal mine site near Penfield in Clearfield County, Pa. Under a no-cost contract with the state of Pennsylvania, BAM is using boiler slag, causticizing byproducts (lime) and nonreclaimable clarifier sludge from International Paper Co. (Erie, Pa.). The mine reclamation techniques developed and monitored at the site include using man-made wetlands to treat acid mine drainage and testing anhydrous ammonia as a similar treatment agent. BAM researches and tests fly ash mixed with lime-based activators as fill material for land reclamation, and develops and uses artificial soil material from paper mill and tannery biosolids.

  5. Gasification of high ash, high ash fusion temperature bituminous coals

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guohai; Vimalchand, Pannalal; Peng, WanWang

    2015-11-13

    This invention relates to gasification of high ash bituminous coals that have high ash fusion temperatures. The ash content can be in 15 to 45 weight percent range and ash fusion temperatures can be in 1150.degree. C. to 1500.degree. C. range as well as in excess of 1500.degree. C. In a preferred embodiment, such coals are dealt with a two stage gasification process--a relatively low temperature primary gasification step in a circulating fluidized bed transport gasifier followed by a high temperature partial oxidation step of residual char carbon and small quantities of tar. The system to process such coals further includes an internally circulating fluidized bed to effectively cool the high temperature syngas with the aid of an inert media and without the syngas contacting the heat transfer surfaces. A cyclone downstream of the syngas cooler, operating at relatively low temperatures, effectively reduces loading to a dust filtration unit. Nearly dust- and tar-free syngas for chemicals production or power generation and with over 90%, and preferably over about 98%, overall carbon conversion can be achieved with the preferred process, apparatus and methods outlined in this invention.

  6. Use of Incineration MSW Ash: A Review

    OpenAIRE

    Charles H. K. Lam; Alvin W. M. Ip; John Patrick Barford; Gordon McKay

    2010-01-01

    This study reviews the characteristics of municipal solid waste incineration (MSWI) ashes, with a main focus on the chemical properties of the ashes. Furthermore, the possible treatment methods for the utilization of ash, namely, separation processes, solidification/stabilization and thermal processes, are also discussed. Seven types of MSWI ash utilization are reviewed, namely, cement and concrete production, road pavement, glasses and ceramics, agriculture, stabilizing agent, adsorbents and...

  7. Transcriptomic signatures of ash (Fraxinus spp. phloem.

    Directory of Open Access Journals (Sweden)

    Xiaodong Bai

    Full Text Available BACKGROUND: Ash (Fraxinus spp. is a dominant tree species throughout urban and forested landscapes of North America (NA. The rapid invasion of NA by emerald ash borer (Agrilus planipennis, a wood-boring beetle endemic to Eastern Asia, has resulted in the death of millions of ash trees and threatens billions more. Larvae feed primarily on phloem tissue, which girdles and kills the tree. While NA ash species including black (F. nigra, green (F. pennsylvannica and white (F. americana are highly susceptible, the Asian species Manchurian ash (F. mandshurica is resistant to A. planipennis perhaps due to their co-evolutionary history. Little is known about the molecular genetics of ash. Hence, we undertook a functional genomics approach to identify the repertoire of genes expressed in ash phloem. METHODOLOGY AND PRINCIPAL FINDINGS: Using 454 pyrosequencing we obtained 58,673 high quality ash sequences from pooled phloem samples of green, white, black, blue and Manchurian ash. Intriguingly, 45% of the deduced proteins were not significantly similar to any sequences in the GenBank non-redundant database. KEGG analysis of the ash sequences revealed a high occurrence of defense related genes. Expression analysis of early regulators potentially involved in plant defense (i.e. transcription factors, calcium dependent protein kinases and a lipoxygenase 3 revealed higher mRNA levels in resistant ash compared to susceptible ash species. Lastly, we predicted a total of 1,272 single nucleotide polymorphisms and 980 microsatellite loci, among which seven microsatellite loci showed polymorphism between different ash species. CONCLUSIONS AND SIGNIFICANCE: The current transcriptomic data provide an invaluable resource for understanding the genetic make-up of ash phloem, the target tissue of A. planipennis. These data along with future functional studies could lead to the identification/characterization of defense genes involved in resistance of ash to A. planipennis

  8. Interspecific Proteomic Comparisons Reveal Ash Phloem Genes Potentially Involved in Constitutive Resistance to the Emerald Ash Borer

    OpenAIRE

    Justin G A Whitehill; Alexandra Popova-Butler; Green-Church, Kari B.; Koch, Jennifer L; Herms, Daniel A.; Pierluigi Bonello

    2011-01-01

    The emerald ash borer (Agrilus planipennis) is an invasive wood-boring beetle that has killed millions of ash trees since its accidental introduction to North America. All North American ash species (Fraxinus spp.) that emerald ash borer has encountered so far are susceptible, while an Asian species, Manchurian ash (F. mandshurica), which shares an evolutionary history with emerald ash borer, is resistant. Phylogenetic evidence places North American black ash (F. nigra) and Manchurian ash in ...

  9. Use of ashes and ash-and-slad wastes in construction

    Directory of Open Access Journals (Sweden)

    P. Lahtinen

    2011-06-01

    Full Text Available The use of ash waste saves expenses on main materials without compromising the quality of the product, while solving the problem of disposal of ash materials. The aim of this work is classification of ashes and evaluation its use in construction.Classification of ash-and-slad wastes based on type of burned coal, way of incineration, flame temperature, way of ash disposal is made. The chemical composition and behavior of shale ash, its main deposits, its advantages as a mineral concrete admixture are analysed. Fly ashes are divided into siliceous ashes and basic ashes.Various application areas of ash-and-slad wastes in construction are considered, the examples of its use are given.

  10. DURABILITY OF HARDENED FLY ASH PASTE

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The mechanical properties and durability ( mainly frost-resistance and carbonation resistance ) of fly ash-CaO-CaSO4 .2H2O hardened paste are studied. The relationship among durability of harden ed fly ash paste, the quantity and distribution of hydrates and the initial p aste texture of hardened fly ash paste is presented.

  11. Method of solidifying burnt ash

    International Nuclear Information System (INIS)

    Unsaturated polyester resins may not sometime be hardened satisfactorily by means of burnt ashes. It has been found that this dues to oxygen contained in the burnt ashes. In addition, it has also been found that oxygen hindering condensation is not contained in voids of the ashes but mainly adsorbed on carbon as the ash ingredient. In view of the above, before injection of the resin, the pressure inside the vessel is once reduced and a nitrogen gas is charged in place of air. Unsaturated polyester resins with acid value as low as possible are preferred and those having acid value of less than 5 are used. An oxydizer comprises a polymerizer initiator and a polymerization promoter, which is mixed with a hardening agent or solidifying agent by an inline mixer. A customary steel drum is used as a solidifying vessel and cement mortar is lined to the inside thereof so as to easily attain adhesion with the hardening agent. This enables to obtain solidification products of high strength in a simple step. (T.M.)

  12. Radioactivity of wood ash; Puun tuhkan radioaktiivisuus

    Energy Technology Data Exchange (ETDEWEB)

    Rantavaara, A.; Moring, M

    2000-01-01

    STUK (Finnish Radiation and Nuclear Safety Authority) has investigated natural and artificial radioactivity in wood ash and radiation exposure from radionuclides in ash since 1996. The aim was to consider both handling of ash and different ways of using ash. In all 87 ash samples were collected from 22 plants using entirely or partially wood for their energy production in 1996-1997. The sites studied represented mostly chemical forest industry, sawmills or district heat production. Most plants used fluidised bed combustion technique. Samples of both fly ash and bottom ash were studied. The activity concentrations of radionuclides in samples of, e.g., dried fly ash from fuel containing more than 80% wood were determined. The means ranged from 2000 to less than 50 Bq kg{sup -1}, in decreasing order: {sup 137}Cs, {sup 40}K, {sup 90}Sr, {sup 210}Pb,{sup 226}Ra, {sup 232}Th, {sup 134}Cs, {sup 235}U. In bott radionuclide contents decreased in the same order as in fly ash, but were smaller, and {sup 210}Pb was hardly detectable. The NH{sub 4}Ac extractable fractions of activities for isotopes of alkaline elements (K, Cs) in bottom ash were lower than in fly ash, whereas solubility of heavier isotopes was low. Safety requirements defined by STUK in ST-guide 12.2 for handling of peat ash were fulfilled at each of the sites. Use of ash for land-filling and construction of streets was minimal during the sampling period. Increasing this type of ash use had often needed further investigations, as description of the use of additional materials that attenuate radiation. Fertilisation of forests with wood ash adds slightly to the external irradiation in forests, but will mostly decrease doses received through use of timber, berries, mushrooms and game meat. (orig.)

  13. Coal ash artificial reef demonstration

    International Nuclear Information System (INIS)

    This experimental project evaluated the use of coal ash to construct artificial reefs. An artificial reef consisting of approximately 33 tons of cement-stabilized coal ash blocks was constructed in approximately 20 feet of water in the Gulf of Mexico approximately 9.3 miles west of Cedar Key, Florida. The project objectives were: (1) demonstrate that a durable coal ash/cement block can be manufactured by commercial block-making machines for use in artificial reefs, and (2) evaluate the possibility that a physically stable and environmentally acceptable coal ash/cement block reef can be constructed as a means of expanding recreational and commercial fisheries. The reef was constructed in February 1988 and biological surveys were made at monthly intervals from May 1988 to April 1989. The project provided information regarding: Development of an optimum design mix, block production and reef construction, chemical composition of block leachate, biological colonization of the reef, potential concentration of metals in the food web associated with the reef, acute bioassays (96-hour LC50). The Cedar Key reef was found to be a habitat that was associated with a relatively rich assemblage of plants and animals. The reef did not appear to be a major source of heavy metals to species at various levels of biological organization. GAI Consultants, Inc (GAI) of Monroeville, Pennsylvania was the prime consultant for the project. The biological monitoring surveys and evaluations were performed by Environmental Planning and Analysis, Inc. of Tallahassee, Florida. The chemical analyses of biological organisms and bioassay elutriates were performed by Savannah Laboratories of Tallahassee, Florida. Florida Power Corporation of St. Petersburg, Florida sponsored the project and supplied ash from their Crystal River Energy Complex

  14. Use of Incineration MSW Ash: A Review

    Directory of Open Access Journals (Sweden)

    Charles H. K. Lam

    2010-07-01

    Full Text Available This study reviews the characteristics of municipal solid waste incineration (MSWI ashes, with a main focus on the chemical properties of the ashes. Furthermore, the possible treatment methods for the utilization of ash, namely, separation processes, solidification/stabilization and thermal processes, are also discussed. Seven types of MSWI ash utilization are reviewed, namely, cement and concrete production, road pavement, glasses and ceramics, agriculture, stabilizing agent, adsorbents and zeolite production. The practical use of MSWI ash shows a great contribution to waste minimization as well as resources conservation.

  15. Adhesion Strength of Biomass Ash Deposits

    DEFF Research Database (Denmark)

    Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao;

    2016-01-01

    Ash deposition on boiler surfaces is a major problem encountered during biomass combustion. Ash deposition adversely influences the boiler efficiency, may corrode heat transfer surfaces, and may even completely block flue gas channels in severe cases, causing expensive unscheduled boiler shutdowns....... Therefore, timely removal of ash deposits is essential for optimal boiler operation. In order to improve the qualitative and quantitative understanding of deposit shedding in boilers, this study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash...

  16. Engineering Behavior and Characteristics of Wood Ash and Sugarcane Bagasse Ash

    Directory of Open Access Journals (Sweden)

    Francisco Grau

    2015-10-01

    Full Text Available Biomasses are organic materials that are derived from any living or recently-living structure. Plenty of biomasses are produced nationwide. Biomasses are mostly combusted and usually discarded or disposed of without treatment as biomass ashes, which include wood and sugarcane bagasse ashes. Thus, recycling or treatment of biomass ashes leads to utilizing the natural materials as an economical and environmental alternative. This study is intended to provide an environmental solution for uncontrolled disposal of biomass ashes by way of recycling the biomass ash and replacing the soils in geotechnical engineering projects. Therefore, in this study, characteristic tests of wood and sugarcane bagasse ashes that are considered the most common biomass ashes are conducted. The test of chemical compositions of biomass ashes is conducted using energy dispersive X-ray spectroscopy (EDS, and Scanning Electron Microscope (SEM, and heavy metal analysis is also conducted. Engineering behaviors including hydraulic conductivity, constrained modulus and shear modulus are examined. Also, coal fly ash Class C is used in this study for comparison with biomass ashes, and Ottawa 20/30 sands containing biomass ashes are examined to identify the soil replacement effect of biomass ashes. The results show that the particle sizes of biomass ashes are halfway between coal fly ash Class C and Ottawa 20/30 sand, and biomass ashes consist of a heterogeneous mixture of different particle sizes and shapes. Also, all heavy metal concentrations were found to be below the US Environmental Protection Agency (EPA maximum limit. Hydraulic conductivity values of Ottawa 20/30 sand decrease significantly when replacing them with only 1%–2% of biomass ashes. While both the constrained modulus and shear modulus of biomass ashes are lower than Ottawa 20/30 sand, those of mixtures containing up to 10% biomass ashes are little affected by replacing the soils with biomass ashes.

  17. Identifying glass compositions in fly ash

    Science.gov (United States)

    Aughenbaugh, Katherine; Stutzman, Paul; Juenger, Maria

    2016-01-01

    In this study, four Class F fly ashes were studied with a scanning electron microscope; the glassy phases were identified and their compositions quantified using point compositional analysis with k-means clustering and multispectral image analysis. The results showed that while the bulk oxide contents of the fly ashes were different, the four fly ashes had somewhat similar glassy phase compositions. Aluminosilicate glasses (AS), calcium aluminosilicate glasses (CAS), a mixed glass, and, in one case, a high iron glass were identified in the fly ashes. Quartz and iron crystalline phases were identified in each fly ash as well. The compositions of the three main glasses identified, AS, CAS, and mixed glass, were relatively similar in each ash. The amounts of each glass were varied by fly ash, with the highest calcium fly ash containing the most of calcium-containing glass. Some of the glasses were identified as intermixed in individual particles, particularly the calcium-containing glasses. Finally, the smallest particles in the fly ashes, with the most surface area available to react in alkaline solution, such as when mixed with portland cement or in alkali-activated fly ash, were not different in composition than the large particles, with each of the glasses represented. The method used in the study may be applied to a fly ash of interest for use as a cementing material in order to understand its potential for reactivity.

  18. Identifying glass compositions in fly ash

    Directory of Open Access Journals (Sweden)

    Katherine eAughenbaugh

    2016-01-01

    Full Text Available In this study, four Class F fly ashes were studied with a scanning electron microscope; the glassy phases were identified and their compositions quantified using point compositional analysis with k-means clustering and multispectral image analysis. The results showed that while the bulk oxide contents of the fly ashes were different, the four fly ashes had somewhat similar glassy phase compositions. Aluminosilicate glasses (AS, calcium aluminosilicate glasses (CAS, a mixed glass, and, in one case, a high iron glass were identified in the fly ashes. Quartz and iron crystalline phases were identified in each fly ash as well. The compositions of the three main glasses identified, AS, CAS, and mixed glass, were relatively similar in each ash. The amounts of each glass were varied by fly ash, with the highest calcium fly ash containing the most of calcium-containing glass. Some of the glasses were identified as intermixed in individual particles, particularly the calcium-containing glasses. Finally, the smallest particles in the fly ashes, with the most surface area available to react in alkaline solution, such as when mixed with portland cement or in alkali-activated fly ash, were not different in composition than the large particles, with each of the glasses represented. The method used in the study may be applied to a fly ash of interest for use as a cementing material in order to understand its potential for reactivity.

  19. ACAA fly ash basics: quick reference card

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Fly ash is a fine powdery material created when coal is burned to generate electricity. Before escaping into the environment via the utility stacks, the ash is collected and may be stored for beneficial uses or disposed of, if necessary. The use of fly ash provides environmental benefits, such as the conservation of natural resources, the reduction of greenhouse gas emissions and eliminating the needed for ash disposal in landfills. It is also a valuable mineral resource that is used in construction and manufacturing. Fly ash is used in the production of Portland cement, concrete, mortars and stuccos, manufactured aggregates along with various agricultural applications. As mineral filler, fly ash can be used for paints, shingles, carpet backing, plastics, metal castings and other purposes. This quick reference card is intended to provide the reader basic source, identification and composition, information specifically related to fly ash.

  20. The Ashes of Marci Shore

    Directory of Open Access Journals (Sweden)

    Zbigniew Kopeć

    2013-01-01

    Full Text Available The article discusses Marci Shore’s social and historical thought, as presented in her books: Caviar and Ashes: A Warsaw Generation’s Life and Death in Marxism, 1918-1968 (2006, The Taste of Ashes (2013, and her essays recently published in Polish translation. The author follows the American historian, presenting her concept of modernity, but focuses on the main theme of her research: the contribution of Jewish writers, poets, artists, and intellectuals to the creation of Marxism. The author acknowledges the great value of Marci Shore’s writings, but argues that her panorama of the 20th century would be fuller if her discussion included a reflection on the religious attitude of many Jewish thinkers to Marxism and the USSR. This topic was discussed by Nikolai Berdyaev and Polish thinkers who published in pre-war social journals.

  1. Ultrasonic ash/pyrite liberation

    Energy Technology Data Exchange (ETDEWEB)

    Yungman, B.A.; Buban, K.S.; Stotts, W.F.

    1990-06-01

    The objective of this project was to develop a coal preparation concept which employed ultrasonics to precondition coal prior to conventional or advanced physical beneficiation processes such that ash and pyrite separation were enhanced with improved combustible recovery. Research activities involved a series of experiments that subjected three different test coals, Illinois No. 6, Pittsburgh No. 8, and Upper Freeport, ground to three different size fractions (28 mesh [times] 0, 200 mesh [times] 0, and 325 mesh [times] 0), to a fixed (20 kHz) frequency ultrasonic signal prior to processing by conventional and microbubble flotation. The samples were also processed by conventional and microbubble flotation without ultrasonic pretreatment to establish baseline conditions. Product ash, sulfur and combustible recovery data were determined for both beneficiation processes.

  2. Packing channels with hydroinsulating ash pitchings

    Energy Technology Data Exchange (ETDEWEB)

    Nowakowa, J.

    1982-01-01

    The paper evaluates utilizatiion of fly ash from fossil-fuel power plants for production of panels used as pitching of channels and other water constructions. Two ash types were used: from the Konin plant fired with brown coal and from the Elblag plant fired with black coal. Three panel types were evaluated: fly ash from brown coal and 5% waterglass; fly ash from black coal, 6% waste products from sulfur filtration and 10% waterglass; ash from black coal, 6% carbide residue and 10% waterglass. Physical properties of three panel types such as filtration properties, compression strength, water influence and selected chemical properties (toxicity caused by the presence of activating compounds) were analyzed. Grass growth rate on ash panel pitching was observed 12 months long under laboratory conditions. Investigations show that grass growth rate was higher when brown coal ash was used. Water filtration improved grass vegetation in comparison to grass growth on dry ash panels only influenced by atmospheric precipitations. Grass roots did not penetrate ash pitching but formed a protective cover on panel surface. Use of channel pitching made of fly ash, waterglass and activating reagents is recommended. (13 refs.)

  3. Rapid toxicity screening of gasification ashes.

    Science.gov (United States)

    Zhen, Xu; Rong, Le; Ng, Wei Cheng; Ong, Cynthia; Baeg, Gyeong Hun; Zhang, Wenlin; Lee, Si Ni; Li, Sam Fong Yau; Dai, Yanjun; Tong, Yen Wah; Neoh, Koon Gee; Wang, Chi-Hwa

    2016-04-01

    The solid residues including bottom ashes and fly ashes produced by waste gasification technology could be reused as secondary raw materials. However, the applications and utilizations of these ashes are very often restricted by their toxicity. Therefore, toxicity screening of ash is the primary condition for reusing the ash. In this manuscript, we establish a standard for rapid screening of gasification ashes on the basis of in vitro and in vivo testing, and henceforth guide the proper disposal of the ashes. We used three different test models comprising human cell lines (liver and lung cells), Drosophila melanogaster and Daphnia magna to examine the toxicity of six different types of ashes. For each ash, different leachate concentrations were used to examine the toxicity, with C0 being the original extracted leachate concentration, while C/C0 being subsequent diluted concentrations. The IC50 for each leachate was also quantified for use as an index to classify toxicity levels. The results demonstrated that the toxicity evaluation of different types of ashes using different models is consistent with each other. As the different models show consistent qualitative results, we chose one or two of the models (liver cells or lung cells models) as the standard for rapid toxicity screening of gasification ashes. We may classify the gasification ashes into three categories according to the IC50, 24h value on liver cells or lung cells models, namely "toxic level I" (IC50, 24h>C/C0=0.5), "toxic level II" (C/C0=0.05types of ashes generated in gasification plants every day. Subsequently, appropriate disposal methods can be recommended for each toxicity category. PMID:26923299

  4. Volcanic ash infrared signature: porous non-spherical ash particle shapes compared to homogeneous spherical ash particles

    OpenAIRE

    A. Kylling; M. Kahnert; Lindqvist, H; Nousiainen, T.

    2014-01-01

    The reverse absorption technique is often used to detect volcanic ash clouds from thermal infrared satellite measurements. From these measurements effective particle radius and mass loading may be estimated using radiative transfer modelling. The radiative transfer modelling usually assumes that the ash particles are spherical. We calculated thermal infrared optical properties of highly irregular and porous ash particles and compared these with mass- and volume-equivalent sp...

  5. Can vegetative ash be water repellent?

    Science.gov (United States)

    Bodí, M. B.; Cerdà, A.; Mataix-Solera, J.; Doerr, S. H.

    2012-04-01

    In most of the literature, ash is referred to as a highly wettable material (e.g. Cerdà and Doerr, 2008; Etiegni and Campbell, 1991; Woods and Balfour 2010). However, the contrary was suggested in few articles, albeit with no further quantification (Gabet and Sternberg, 2008; Khanna et al., 1996; Stark, 1977). To clarify this question, water repellency measurements on ash using the Water Drop Penetration Times (WDPT) method were performed on ash from Mediterranean ecosystems and it was found to be water repellent (Bodí et al. 2011). Water repellency on ash from different wildfires ranged from 40 to 10 % occurrence with samples being extreme repellent (lasting more than 3600 s to penetrate). Part of the ash produced in the laboratory was also water repellent. After that, other ash samples had been found water repellent in wildfires in Colorado (unpublished results), Portugal (Gonzalez-Pelayo, 2009), or in prescribed fires in Australia (Bodí et al. 2011b; Petter Nyman, personnal communication). All the samples exhibiting water repellent properties had in common that were combusted at low temperatures, yielding in general ash with dark colour and contents of organic carbon of more than 18 % (Bodí et al. 2011a), although these properties were not exactly proportional to its water repellency occurrence or persistence. In addition, the species studied in Bodí et al. (2011) had been found to produce different levels of WR repellency, being ash from Pinus halepensis more repellent than that from Quercus coccifera and Rosmarins officinalis. Ash from Eucaliptus radiata had been found also very water repellent, as Pinus halepensis (unpublished data). The reasons of the existance of water repellent ash are that the charred residue produced by fire (an also contained in the ash) can contain aromatic compounds that have a lower free energy than water and therefore behave as hydrophobic materials with reduced solubility (Almendros et al., 1992 and Knicker, 2007

  6. Possibilities of utilizing power plant fly ashes

    Directory of Open Access Journals (Sweden)

    Mezencevová Andrea

    2003-09-01

    Full Text Available The burning of fossil fuels in industrial power stations plays a significant role in the production of thermal and electrical energy. Modern thermal power plants are producing large amounts of solid waste, mainly fly ashes. The disposal of power plant waste is a large environmental problem at the present time. In this paper, possibilities of utilization of power plant fly ashes in industry, especially in civil engineering, are presented. The fly ash is a heterogeneous material with various physical, chemical and mineralogical properties, depending on the mineralogical composition of burned coal and on the used combustion technology. The utilization of fly ashes is determined of their properties. The fineness, specific surface area, particle shape, density, hardness, freeze-thaw resistance, etc. are decisive. The building trade is a branch of industry, which employs fly ash in large quantities for several decades.The best utilization of fluid fly ashes is mainly in the production of cement and concrete, due to the excellent pozzolanic and cementitious properties of this waste. In the concrete processing, the fly ash is utilized as a replacement of the fine aggregate (fine filler or a partial replacement for cement (active admixture. In addition to economic and ecological benefits, the use of fly ash in concrete improves its workability and durability, increases compressive and flexural strength, reduces segregation, bleeding, shrinkage, heat evolution and permeability and enhances sulfate resistance of concrete.The aim of current research is to search for new technologies for the fly ash utilization. The very interesting are biotechnological methods to recovery useful components of fly ashes and unconventional methods of modification of fly ash properties such as hydrothermal zeolitization and mechanochemical modification of its properties. Mechanochemistry deals with physico - chemical transformations and chemical reactions of solids induced by

  7. Composites Based on Fly Ash and Clay

    International Nuclear Information System (INIS)

    Fly ash is a waste generated from the coal combustion during the production of electricity in the thermal power plants. It presents industrial by-product containing Technologically Enhanced Natural Occurring Radioactive Materials (TENORM) with the great potential for valorisation. Fly ash is successfully utilized in cement and concrete industry, also in ceramics industry as component for manufacturing bricks and tiles, and recently there are many investigations for production of glass-ceramics from fly ash. Although the utilization of fly ash in construction and civil engineering is dominant, the development of new alternative application for its further exploitation into new products is needed. This work presents the possibility for fly ash utilization for fabricating dense composites based on clay and fly ash with the potential to be used in construction industry

  8. Effect of fly ash on autogenous shrinkage

    Energy Technology Data Exchange (ETDEWEB)

    Pipat Termkhajornkit; Toyoharu Nawa; Masashi Nakai; Toshiki Saito [Hokkaido University, Hokkaido (Japan). Division of Structural and Geotechnical Engineering, Graduate School of Engineering

    2005-03-01

    The correlation between autogenous shrinkage and degree of hydration of fly ash was determined with the selective dissolution method. Then, the relationship between the degree of hydration of fly ash and autogenous shrinkage was examined. The results showed that the degree of hydration of fly ash increased as its Blaine surface area increased. The degree of hydration of fly ash increased with time, and autogenous shrinkage increased corresponding to the increase in the degree of hydration of fly ash. Moreover, it was found that the total quantity of Al{sub 2}O{sub 3} in cement-fly ash samples affected autogenous shrinkage at early ages, but the long-term influence was very small.

  9. Volcanic ash impacts on critical infrastructure

    Science.gov (United States)

    Wilson, Thomas M.; Stewart, Carol; Sword-Daniels, Victoria; Leonard, Graham S.; Johnston, David M.; Cole, Jim W.; Wardman, Johnny; Wilson, Grant; Barnard, Scott T.

    2012-01-01

    Volcanic eruptions can produce a wide range of hazards. Although phenomena such as pyroclastic flows and surges, sector collapses, lahars and ballistic blocks are the most destructive and dangerous, volcanic ash is by far the most widely distributed eruption product. Although ash falls rarely endanger human life directly, threats to public health and disruption to critical infrastructure services, aviation and primary production can lead to significant societal impacts. Even relatively small eruptions can cause widespread disruption, damage and economic loss. Volcanic eruptions are, in general, infrequent and somewhat exotic occurrences, and consequently in many parts of the world, the management of critical infrastructure during volcanic crises can be improved with greater knowledge of the likely impacts. This article presents an overview of volcanic ash impacts on critical infrastructure, other than aviation and fuel supply, illustrated by findings from impact assessment reconnaissance trips carried out to a wide range of locations worldwide by our international research group and local collaborators. ‘Critical infrastructure’ includes those assets, frequently taken for granted, which are essential for the functioning of a society and economy. Electricity networks are very vulnerable to disruption from volcanic ash falls. This is particularly the case when fine ash is erupted because it has a greater tendency to adhere to line and substation insulators, where it can cause flashover (unintended electrical discharge) which can in turn cause widespread and disruptive outages. Weather conditions are a major determinant of flashover risk. Dry ash is not conductive, and heavy rain will wash ash from insulators, but light rain/mist will mobilise readily-soluble salts on the surface of the ash grains and lower the ash layer’s resistivity. Wet ash is also heavier than dry ash, increasing the risk of line breakage or tower/pole collapse. Particular issues for water

  10. COAL ASH RESOURCES RESEARCH CONSORTIUM

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The Coal Ash Resources Research Consortium (CARRC, pronounced �cars�) is the core coal combustion by-product (CCB) research group at the Energy & Environmental Research Center (EERC). CARRC focuses on performing fundamental and applied scientific and engineering research emphasizing the environmentally safe, economical use of CCBs. CARRC member organizations, which include utilities and marketers, are key to developing industry-driven research in the area of CCB utilization and ensuring its successful application. CARRC continued the partnership of industry partners, university researchers, and the U.S. Department of Energy (DOE) addressing needs in the CCB industry through technical research and development projects. Technology transfer also continued through distribution and presentation of the results of research activities to appropriate audiences, with emphasis on reaching government agency representatives and end users of CCBs. CARRC partners have evolved technically and have jointly developed an understanding of the layers of social, regulatory, legal, and competition issues that impact the success of CCB utilization as applies to the CCB industry in general and to individual companies. Many CARRC tasks are designed to provide information on CCB performance including environmental performance, engineering performance, favorable economics, and improved life cycle of products and projects. CARRC activities from 1993�1998 included a variety of research tasks, with primary work performed in laboratory tasks developed to answer specific questions or evaluate important fundamental properties of CCBs. The tasks summarized in this report are 1) The Demonstration of CCB Use in Small Construction Projects, 2) Application of CCSEM (computer-controlled scanning electron microscopy) for Coal Combustion By-Product Characterization, 3) Development of a Procedure to Determine Heat of Hydration for Coal Combustion By-Products, 4) Investigation of the Behavior of High

  11. The Ash-1, Ash-2 and Trithorax Genes of Drosophila Melanogaster Are Functionally Related

    OpenAIRE

    Shearn, A.

    1989-01-01

    Mutations in the ash-1 and ash-2 genes of Drosophila melanogaster cause a wide variety of homeotic transformations that are similar to the transformations caused by mutations in the trithorax gene. Based on this similar variety of transformations, it was hypothesized that these genes are members of a functionally related set. Three genetic tests were employed here to evaluate that hypothesis. The first test was to examine interactions of ash-1, ash-2 and trithorax mutations with each other. D...

  12. Hazards Associated With Recent Popocatepetl Ash Emissions

    Science.gov (United States)

    Nieto, A.; Martin, A.; Espinasa-Pereña, R.; Ferres, D.

    2013-05-01

    Popocatepetl has been producing ash from small eruptions since 1994. Until 2012 about 650 small ash emissions have been recorded at the monitoring system of Popocatépetl Volcano. Ash consists mainly of glassy lithic clasts from the recent crater domes, plagioclase and pyroxene crystals, and in major eruptions, olivine and/or hornblende. Dome forming eruptions produced a fine white ash which covers the coarser ash. This fine ash consists of plagioclase, glass and cristobalite particles mostly under15 microns. During the recent crisis at Popocatépetl, April and May2012 ash fell on villages to the east and west of the volcano, reaching Mexico City (more than 20 million people) and Puebla (2 million people). In 14 cases the plumes had heights over 2 km, the largest on May 2 and 11 (3 and 4 km in height, respectively). Heavier ash fall occurred on April 13, 14, 20, and 23 and May 2, 3, 5, 11, 14, 23, 24 and 25. A database for ash fall was constructed from April 13 with field observations, reports emitted by the Centro Nacional de Comunicaciones (CENACOM), ash fall advisories received at CENAPRED and alerts from the Servicios a la Navegación en el Espacio Aéreo Mexicano (SENEAM). This aim of this database is to calculate areas affected by the ash and estimate the ash fall volume emitted by Popocatépetl in each of these events. Heavy ash fall from the May 8 to May 11 combined with reduced visibility due to fog forced to closure of the Puebla airport during various periods of time, for up to 13 hours. Domestic and international flights were cancelled. Ash eruptions have caused respiratory conditions in the state of Puebla, to the east of the volcano, since 1994 (Rojas et al, 2001), but because of the changing wind conditions in the summer mainly, some of these ash plumes go westward to towns in the State of Mexico and even Mexico City. Preliminary analyses of these eruptions indicate that some ash emissions produced increased respiratory noninfectious problems

  13. Characteristics of Wood ASH/OPC Concrete

    OpenAIRE

    Abdullahi, M

    2006-01-01

    The study presents the behaviour of wood ash / OPC concrete. Chemical analysis of wood ash, bulk density, sieve analysis and specific gravity of wood ash and aggregates, consistency, setting time and slump test of the fresh paste were conducted to determine the suitability of the materials for concrete making. Mix ratio of 1:2:4 and percentage replacement level of 0, 10, 20, 30 and 40 percents of cement by wood ash were used. 150mm´150mm cubes were cast, cured and crushed at 28 and 60 days to...

  14. Triboelectrostatic separation of unburned carbon from fly ash for ash recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Keun; Kim, Seong Chan; Son, Nag Won; Kim, Doo Hyun; Oh, Jung Geun [Pusan National University, Pusan (Korea, Republic of)

    1997-09-30

    Fly ash from a coal-fired power plant is produced approximately 3 million tons in 1996 and causes the serious environmental problem due to the disposal in the ash pond. Fly ash is an accepted additive in concrete where it adds strength, sulfate resistance and reduced cost, provided acceptable levels of unburned carbon are maintained. This paper describes to investigate the technical feasibility of a dry triboelectrostatic process to separate unburned carbon from fly ash into economically valuable products. Particles of unburned carbon and fly ash can be imparted positive and negative surface charges, respectively, with a copper tribocharger due to differences in the work function values of the particles and the tribocharger, and can be separated by passing them through an external electric field. A laboratory scale separation system consists of a screw feeder for ash supply, a tribocharger, vertical collecting copper plates, power supplies, a flow meter, and a fan. Separation tests taking into account separation efficiency and ash recovery showed that fly ash recovery was strongly dependent on the tribocharger geometry, electric field strength, fly ash size, and ash feeding rate. Optimal separation conditions were fly ash size less than 125 {mu}m and electric field strength of 200 kV/m. Over 80% of the fly ash with 7% loss on ignition was recovered at carbon contents less than 3%. (author). 6 refs., 2 tabs., 9 figs.

  15. Characterization of fly ash from bio and municipal waste

    DEFF Research Database (Denmark)

    Lima, Ana T.; Ottosen, Lisbeth M.; Pedersen, Anne Juul;

    2008-01-01

    the co-combustion of wood and oil. The focus is laid on differences in ash characteristics and on the mobility of Cd and Cr. These two heavy metals are chosen because Cd is the problematic heavy metal in bio ashes and Cr is problematic in many ash stabilization methods (in the Cr(VI) state). Based on...... leaching characteristics, Cd is found mainly associated with carbonates in MSW fly ash and is associated with oxides in straw and co-combustion of wood and oil ash, while Cr is mainly associated with oxides in all studied fly ashes or with carbonates in straw ash. Among the studied parameters, crystalline......Four different fly ashes are characterized in the present paper. The ashes differ in the original fuel type and were sampled at distinct plants. The investigation includes two different ashes from municipal solid waste incineration (with and without sorbents addition), a straw ash and an ash from...

  16. Emergency protection approved for two Ash Meadows fishes

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A large residential and agricultural development near Ash Meadows, Nevada poses an imminent threat to the survival of the Ash Meadows Amargosa pupfish and the Ash...

  17. Forest fuel, ashes and ecology

    International Nuclear Information System (INIS)

    Large-scale use of bioenergy is an essential measure if several of the major environmental problems are to be solved. However, it is important to utilize the possibilities available to produce biofuel without creating new environmental problems. Whole-tree removal gives a considerable reduction in the nitrogen lead which, in combination with the return of ashes, counteracts the nutrient imbalance and acidification in southern Sweden. Forestry of that kind should lead to lower total leaching of nitrogen in comparison with conventional forestry. In situations where there is high deposition of atmospheric sulphur and nitrogen, fuel removal with return of a moderate dose of slowly dissolvable ashes should be a good soil management measure. The humus status and flora/fauna always require some kind of consideration. With compensation measures and retained nutrient status there should be no problems with the humus status on most soils. However, on poor and dry soils, it is suitable to avoid whole-tree removal on account of the humus status. Consideration to nature includes, for example, increasing the number of broad-leaf trees, old trees and dead wood (preferably the trunks). These measures concern all types of forestry and are not linked directly with fuel removal. Removal of felling residues and return of ashes are of minor importance in comparison with this and fit well into forestry adapted to natural values. With correct planning and accomplishment of the removal of forest fuel the natural values of the forest can be retained or even improved. Forestry where fuel is also produced can be designed whereby negative effects are avoided at the same time as positive environmental effects are obtained. 68 refs, 5 figs, 3 tabs

  18. Characteristics of spanish fly ashes

    Directory of Open Access Journals (Sweden)

    de Luxán, M. P.

    1988-03-01

    Full Text Available The purpose of this study is the characterization of fly ashes produced by Spanish thermoelectric power plants, according to sampling taken in 1981 and 1982. The study takes in the following characteristics: physical characteristics (size distribution of particles, ...; chemical ones (chemical analysis...; and mineralogical ones (application of instrumental techniques of X-ray diffraction and infrared absorption spectroscopy. From a general point of view, it can be said that the samples of Spanish fly ashes are similar to those produced in other countries. The results obtained are a contribution to the knowledge of Spanish fly ashes and form part of the antecedents of investigations carried out in subsequent years.

    Este trabajo tiene por objeto la caracterización de las cenizas volantes producidas en las Centrales Termoeléctricas españolas, según un muestreo realizado entre 1981 y 1982. El estudio comprende las siguientes características: físicas (distribución del tamaño de partículas,...; químicas (análisis químico, …; y mineralógicas (aplicación de las técnicas instrumentales de difracción de rayos X y espectroscopía de absorción infrarroja. Desde un punto de vista general, se puede afirmar que las muestras de ceniza volante estudiadas son semejantes a las producidas en otros países. Los resultados obtenidos son una aportación al conocimiento de las cenizas volantes españolas y forman parte de los antecedentes de las investigaciones llevadas a cabo en años posteriores.

  19. Changes of the ash structure

    Science.gov (United States)

    Peer, Václav; Friedel, Pavel; Janša, Jan

    2016-06-01

    The aim of the article is to appraisal of the changes in the structure of the ash due to the addition of compounds capable of the eutectics composition change. For the transformation were used limestone and dolomite dosed in amounts of 2, 5 and 10 wt.% with pellets of spruce wood, willow wood and refused derived fuel. Combustion temperatures of the mixtures were adjusted according to the temperatures reached during the using of fuels in power plants, i.e. 900, 1000, 1100 and 1200 °C.

  20. Surface Modification of Fly Ash for Active Catalysis

    OpenAIRE

    Deepti Jain; Renu Hada; Ashu Rani

    2013-01-01

    Fly ash based effective solid base catalyst (KF/Al2O3/fly ash473, KF/Al2O3/fly ash673, and KF/Al2O3/fly ash873) was synthesized by loading KF over chemically and thermally activated fly ash. The chemical activation was done by treating fly ash with aluminum nitrate via precipitation method followed by thermal activation at 650°C to increase the alumina content in fly ash. The increased alumina content was confirmed by SEM-EDX analysis. The alumina enriched fly ash was then loaded with KF (10...

  1. ENG 328 ASH Course Tutorial / eng328dotcom

    OpenAIRE

    anil3

    2015-01-01

    ENG 328 Entire Course (Ash) For more course tutorials visit www.eng328.com ENG 328 Week 1 DQ 1 What is Technical Writing (Ash) ENG 328 Week 1 DQ 2 Target Audience (Ash) ENG 328 Week 2 DQ 1 Collaborative Writing Process (Ash) ENG 328 Week 2 DQ 2 Design and Graphics (Ash) ENG 328 Week 3 DQ 1 Web Design and Readability (Ash) ENG 328 Week 3 DQ 2 Online Technical Documents (Ash) ENG 328 Week 4 DQ 1 Writing Instructions (Ash) ENG 328 Week 4 DQ 2 Writing Propo...

  2. ENG 328 ASH Material-eng328dotcom

    OpenAIRE

    Sandywilliam

    2015-01-01

    ENG 328 Entire Course (Ash) For more course tutorials visit www.eng328.com ENG 328 Week 1 DQ 1 What is Technical Writing (Ash) ENG 328 Week 1 DQ 2 Target Audience (Ash) ENG 328 Week 2 DQ 1 Collaborative Writing Process (Ash) ENG 328 Week 2 DQ 2 Design and Graphics (Ash) ENG 328 Week 3 DQ 1 Web Design and Readability (Ash) ENG 328 Week 3 DQ 2 Online Technical Documents (Ash) ENG 328 Week 4 DQ 1 Writing Instructions (Ash) ENG 328 Week 4 DQ 2 Writing Propo...

  3. CHARACTERIZATION AND COMPARISON OF TREATED AND UNTREATED RICH HUSH ASH & FLY ASH FOR METAL MATRIX COMPOSITES

    Directory of Open Access Journals (Sweden)

    Ravinder Pal Singh

    2011-10-01

    Full Text Available Rice Husk ash and fly ash are agricultural and coal wastes respectively. These are produced in abundance globally and poses risk to health as well as environment. Thus their effective, conducive and eco-friendly utilization has always been a challenge for scientific community. The fly ash has been used as reinforcement for improved mechanical properties of composites (1,3-5,9. Rice husk ash can also be used for similar applications as its composition is almost similar to that of fly ash. This paper mainly deals with identification ofcharacteristics of both the fly ash and rice husk ash using spectroscopic and microscopic analysis. SEM, XRD,XRF and FTIR spectroscopic methods were used for the characterization of treated and untreated ashes. The results were compared and it was observed that both ashes possesses nearly same chemical phases and otherfunctional groups thus proposing the use of rice husk ash as reinforcement like fly ash in Metal Matrix Composites (MMCs specifically for wear resistance applications.

  4. Assessment of Ash Pond Project effectiveness

    International Nuclear Information System (INIS)

    In April 1989 the US Department of Energy (DOE) completed the Ash Pond Isolation Project at the Weldon Spring Site Remedial Action Project (WSSRAP). This Interim Response Action (IRA) was designed to reduce uranium concentrations in surface water released from the Ash Pond Outfall at the Weldon Spring Site (WSS). Uranium concentrations at this outfall have been measured as high as 5,500 pCi/l with an average concentration of 1,498 pCi/l. This project was one of several IRAs aimed at improving health and safety conditions at the WSS prior to the Record of Decision. The Ash Pond Isolation Project was constructed to intercept surface water runoff to the Ash Pond drainage and redirect flows around the Ash Pond and South Dump areas, thereby eliminating leaching and transport of uranium-contaminated materials from these source areas. The DOE has monitored the releases from the Ash Pond Outfall in fulfillment of the site's National Pollutant Discharge Elimination System Permit and initiated additional monitoring to further assess the effectiveness of the Ash Pond Isolation Project. Results of this monitoring effort indicate a reduction in uranium concentrations measured at the Ash Pond Outfall from a pre-completion average of 1,498 pCi/l to an average of 145 pCi/l following completion of the IRA. 6 refs., 6 figs., 3 tabs

  5. Adhesion Strength of Biomass Ash Deposits

    DEFF Research Database (Denmark)

    Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao;

    2015-01-01

    This study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000°C. Subsequently, the deposits were sheared off with the help of an electrically...

  6. Wet physical separation of MSWI bottom ash

    NARCIS (Netherlands)

    Muchova, L.

    2010-01-01

    Bottom ash (BA) from municipal solid waste incineration (MSWI) has high potential for the recovery of valuable secondary materials. For example, the MSWI bottom ash produced by the incinerator at Amsterdam contains materials such as non-ferrous metals (2.3%), ferrous metals (8-13%), gold (0.4 ppm),

  7. Construction procedures using self hardening fly ash

    Science.gov (United States)

    Thornton, S. I.; Parker, D. G.

    1980-07-01

    Fly ash produced in Arkansas from burning Wyoming low sulfur coal is self-hardening and can be effective as a soil stabilizing agent for clays and sands. The strength of soil-self hardening fly ash develops rapidly when compacted immediately after mixing. Seven day unconfined compressive strengths up to 1800 psi were obtained from 20% fly ash and 80% sand mixtures. A time delay between mixing the fly ash with the soil and compaction of the mixture reduced the strength. With two hours delay, over a third of the strength was lost and with four hours delay, the loss was over half. Gypsum and some commercial concrete retarders were effective in reducing the detrimental effect of delayed compaction. Adequate mixing of the soil and fly ash and rapid compaction of the mixtures were found to be important parameters in field construction of stabilized bases.

  8. FLEXURAL BEHAVIOUR OF ACTIVATED FLY ASH CONCRETE

    Directory of Open Access Journals (Sweden)

    SUNILAA GEORGE

    2011-10-01

    Full Text Available Cement concrete is the most widely used construction material in many infrastructure projects. The development and use of mineral admixture for cement replacement is growing in construction industry mainly due to the consideration of cost saving, energy saving, environmental production and conservation of resources. Present study is aimed at replacing cement in concrete with activated fly ash. The paper highlights the chemical activation of low calcium fly ash using CaO and Na2SiO3 in the ratio 1:8 for improving the pozzolanic properties of fly ash .The investigation deals with the flexural behavior of beams using chemically activated fly ash at various cement replacement levels of 10%, 20%, 30%, 40%, 50%, and 60% with water cement ratio 0.45.The results are compared with OPC and Activated Fly ash at the same replacement levels.

  9. Fly Ash Amendments Catalyze Soil Carbon Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Amonette, James E.; Kim, Jungbae; Russell, Colleen K.; Palumbo, A. V.; Daniels, William L.

    2003-09-15

    We tested the effects of four alkaline fly ashes {Class C (sub-bituminous), Class F (bituminous), Class F [bituminous with flue-gas desulfurization (FGD) products], and Class F (lignitic)} on a reaction that simulates the enzyme-mediated formation of humic materials in soils. The presence of FGD products completely halted the reaction, and the bituminous ash showed no benefit over an ash-free control. The sub-bituminous and lignitic fly ashes, however, increased the amount of polymer formed by several-fold. The strong synergetic effect of these ashes when enzyme is present apparently arises from the combined effects of metal oxide co-oxidation (Fe and Mn oxides), alkaline pH, and physical stabilization of the enzyme (porous silica cenospheres).

  10. Investigation on Leaching Behaviour of Fly Ash and Bottom Ash Replacement in Self-Compacting Concrete

    Science.gov (United States)

    Kadir, Aeslina Abdul; Ikhmal Haqeem Hassan, Mohd; Bakri Abdullah, Mohd Mustafa Al

    2016-06-01

    Fly ash and bottom ash are some of the waste generated by coal-fired power plants, which contains large quantities of toxic and heavy metals. In recent years, many researchers have been interested in studying on the properties of self-compacting concrete incorporated with fly ash and bottom ash but there was very limited research from the combination of fly ash and bottom ash towards the environmental needs. Therefore, this research was focused on investigating the leachability of heavy metals of SCC incorporated with fly ash and bottom ash by using Toxicity Characteristic Leaching Procedure, Synthetic Precipitation Leaching Procedure and Static Leaching Test. The samples obtained from the coal-fired power plant located at Peninsula, Malaysia. In this study, the potential heavy metals leached out from SCC that is produced with fly ash as a replacement for Ordinary Portland Cement and bottom ash as a substitute for sand with the ratios from 10% to 30% respectively were designated and cast. There are eight heavy metals of concern such as As, Cr, Pb, Zn, Cu, Ni, Mn and Fe. The results indicated that most of the heavy metals leached below the permissible limits from the United States Environmental Protection Agency and World Health Organization limit for drinking water. As a conclusion, the minimum leaching of the heavy metals from the incorporation of fly ash and bottom ash in self-compacting concrete was found in 20% of fly ash and 20% of bottom ash replacement. The results also indicate that this incorporation could minimize the potential of environmental problems.

  11. Properties and Leachability of Self-Compacting Concrete Incorporated with Fly Ash and Bottom Ash

    Science.gov (United States)

    Kadir, Aeslina Abdul; Ikhmal Haqeem Hassan, Mohd; Jamaluddin, Norwati; Bakri Abdullah, Mohd Mustafa Al

    2016-06-01

    The process of combustion in coal-fired power plant generates ashes, namely fly ash and bottom ash. Besides, coal ash produced from coal combustion contains heavy metals within their compositions. These metals are toxic to the environment as well as to human health. Fortunately, treatment methods are available for these ashes, and the use of fly ash and bottom ash in the concrete mix is one of the few. Therefore, an experimental program was carried out to study the properties and determine the leachability of selfcompacting concrete incorporated with fly ash and bottom ash. For experimental study, self-compacting concrete was produced with fly ash as a replacement for Ordinary Portland Cement and bottom ash as a replacement for sand with the ratios of 10%, 20%, and 30% respectively. The fresh properties tests conducted were slump flow, t500, sieve segregation and J-ring. Meanwhile for the hardened properties, density, compressive strength and water absorption test were performed. The samples were then crushed to be extracted using Toxicity Characteristic Leaching Procedure and heavy metals content within the samples were identified accordingly using Atomic Absorption Spectrometry. The results demonstrated that both fresh and hardened properties were qualified to categorize as self-compacting concrete. Improvements in compressive strength were observed, and densities for all the samples were identified as a normal weight concrete with ranges between 2000 kg/m3 to 2600 kg/m3. Other than that, it was found that incorporation up to 30% of the ashes was safe as the leached heavy metals concentration did not exceed the regulatory levels, except for arsenic. In conclusion, this study will serve as a reference which suggests that fly ash and bottom ash are widely applicable in concrete technology, and its incorporation in self-compacting concrete constitutes a potential means of adding value to appropriate mix and design.

  12. Treatment of fly ash for use in concrete

    Science.gov (United States)

    Boxley, Chett; Akash, Akash; Zhao, Qiang

    2012-05-08

    A process for treating fly ash to render it highly usable as a concrete additive. A quantity of fly ash is obtained that contains carbon and which is considered unusable fly ash for concrete based upon foam index testing. The fly ash is mixed with an activator solution sufficient to initiate a geopolymerization reaction and for a geopolymerized fly ash. The geopolymerized fly ash is granulated. The geopolymerized fly ash is considered usable fly ash for concrete according to foam index testing. The geopolymerized fly ash may have a foam index less than 35% of the foam index of the untreated fly ash, and in some cases less than 10% of the foam index of the untreated fly ash. The activator solution may contain an alkali metal hydroxide, carbonate, silicate, aluminate, or mixtures thereof.

  13. Treatment of fly ash for use in concrete

    Science.gov (United States)

    Boxley, Chett; Akash, Akash; Zhao, Qiang

    2013-01-08

    A process for treating fly ash to render it highly usable as a concrete additive. A quantity of fly ash is obtained that contains carbon and which is considered unusable fly ash for concrete based upon foam index testing. The fly ash is mixed with an activator solution sufficient to initiate a geopolymerization reaction and for a geopolymerized fly ash. The geopolymerized fly ash is granulated. The geopolymerized fly ash is considered usable fly ash for concrete according to foam index testing. The geopolymerized fly ash may have a foam index less than 35% of the foam index of the untreated fly ash, and in some cases less than 10% of the foam index of the untreated fly ash. The activator solution may contain an alkali metal hydroxide, carbonate, silicate, aluminate, or mixtures thereof.

  14. Optimization of CLSM mix proportion with combination of clinker ash and fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Horiguchi, T.; Okumura, H.; Saeki, N. [Hokkaido Univ., Sapporo (Japan)

    2001-07-01

    The disposal of clinker ash and fly ash in Japan is becoming an ecological problem which is being addressed by several research institutions in the country. This study evaluated the effective application of a wide range of off-specification fly ash plus non standard clinker ash in CLSM. CLSM is defined by the ACI Cement and Concrete Terminology as material that results in a compressive strength of 8275 kPa or less at the age of 28 days. In particular, this study examined the effect of mixture proportions on the short-term and long-term compressive strength of CLSM. The cement used in this study was portland cement whose physical and chemical properties were determined by the Japan Industrial Standard. Two different types of fly ash and three different types of clinker ash in different compositions were used. The major differences were in the specific gravity and water absorption capabilities. The various slurry mixtures were tested for flowability, bleeding, segregation and compressive strength and the test results were summarized. It was determined that slump flow varied from 140 to 200 mm. The mixtures satisfied the target value to ensure adequate flowability. Bleeding ratio varied from 1.5 to 6.7 per cent, which is significantly higher than that of ordinary flowable fills. Also, the density of CLSM varied from 1338 to 2056 kg per cubic metre, which is also much lighter than cement mortar, a significant advantage. This paper described the effect of fly ash quality on the compressive strength, the optimum clinker ash composition, and the strength development estimation. It was concluded that there is no significant disadvantage in using fly ash or clinker ash in CLSM. In fact, clinker ash reduces bleeding of CLSM. The optimum proportion of clinker substitution was found to be 50 per cent. The strength of CLSM with fly ash and clinker ash was found to increase significantly up to 91 days. 15 refs., 5 tabs., 9 figs.

  15. Pozzolanic Reaction Kinetics of Coal Ashes

    Institute of Scientific and Technical Information of China (English)

    ZHENG Hongwei; WANG Zhijuan; QIAN Jueshi; SONG Yuanming; WANG Zhi

    2009-01-01

    The pozzolanic reactivity was determined by the hydration kinetics of pozzolanic reaction based on the fact that the hydration products of active SiO_2 and Al_2O_3 with lime were soluble in dilute hydrochloric acid.The results show that the pozzolanic reaction of active SiO_2 and Al2O3 of coal ashes follows apparent first-order kinetics.The reaction rate constant of FBC ashes is greater than that of PC ashes,while the activation energy of the former is lower than that of the latter.It is confirmed that the pozzolanic activity of fluidized bed combustion(FBC)ashes is significantly higher than that of PC ashes,and the reaction barrier of the former is lower than that of the latter,because the microstructures of FBC ashes,such as mineralogical composition,morphology and polymerization degree of [SiO_4]and[AlO_6]are more favorable to the pozzolanic activity development than those of PC ashes.

  16. Kohonen's feature maps for fly ash categorization.

    Science.gov (United States)

    Nataraja, M C; Jayaram, M A; Ravikumar, C N

    2006-12-01

    Fly ash is a common admixture used in concrete and may constitute up to 50% by weight of the total binder material. Incorporation of fly ash in Portland-cement concrete is highly desirable due to technological, economic, and environmental benefits. This article demonstrates the use of artificial intelligence neural networks for the classification of fly ashes in to different groups. Kohonen's Self Organizing Feature Maps is used for the purpose. As chemical composition of fly ash is crucial in the performance of concrete, eight chemical attributes of fly ashes have been considered. The application of simple Kohonen's one-dimensional feature maps permitted to differentiate three main groups of fly ashes. Three one-dimensional feature maps of topology 8-16, 8-24 and 8-32 were explored. The overall classification result of 8-16 topology was found to be significant and encouraging. The data pertaining to 80 fly ash samples were collected from standard published works. The categorization was found to be excellent and compares well with Canadian Standard Association's [CSA A 3000] classification scheme. PMID:17285691

  17. Expansion control for cementation of incinerated ash

    International Nuclear Information System (INIS)

    A method, in which incinerated ash is solidified with a cement material, has been developed to dispose of radioactive incinerated ash waste. A small amount of metallic Al, which was not oxidized in the incineration, existed in the ash. When such ash was mixed with a cement material and water, alkaline components in the ash and the cement were dissolved in the mixing water and then metallic Al reaction with the alkaline compounds resulted in generation of H2. Because the H2 generation began immediately just after the mixing, H2 bubbles pushed up the mixed grout material and an expanded solidified form was obtained. The expansion leads to lowering the strength of the solidified form and making harmful void. In this study, we tried to control H2 generation from the reaction of metallic Al in the cementation by means of following two methods, one was a method to let metallic Al react prior to the cementation and the other was a method to add an expansion inhibitor that made an oxide film on the surface of metallic Al. In the pre-treatment, the ash was soaked in water in order to let metallic Al react with it, and then the ash with the immersion solution was dried at 105 Celsius degrees. The pre-treated ash was mixed with an ordinary portland cement and water. The inhibitor of lithium nitrite, sodium nitrite, phosphoric acid, or potassium dihydrogen phosphate was added at the mixing process. The solidified forms prepared using the pre-treated ash and lithium nitrite were not expanded. Phosphoric acid and sodium nitrite were effective for expansion control, but potassium dihydrogen phosphate did not work. (authors)

  18. Volcanic Ash Transport and Dispersion Forecasting

    Science.gov (United States)

    Servranckx, R.; Stunder, B.

    2006-12-01

    Volcanic ash transport and dispersion models (VATDM) have been used operationally since the mid 1990's by the International Civil Aviation Organization (ICAO) designated Volcanic Ash Advisory Centers (VAAC) to provide ash forecast guidance. Over the years, significant improvements in the detection and prediction of airborne volcanic ash have been realized thanks to improved models, increases in computing power, 24-hr real time monitoring by VAACs / Meteorological Watch Offices and close coordination with Volcano Observatories around the world. Yet, predicting accurately the spatial and temporal structures of airborne volcanic ash and the deposition at the earth's surface remains a difficult and challenging problem. The forecasting problem is influenced by 3 main components. The first one (ERUPTION SOURCE PARAMETERS) comprises all non-meteorological parameters that characterize a specific eruption or volcanic ash cloud. For example, the volume / mass of ash released in the atmosphere, the duration of the eruption, the altitude and distribution of the ash cloud, the particle size distribution, etc. The second component (METEOROLOGY) includes all meteorological parameters (wind, moisture, stability, etc.) that are calculated by Numerical Weather Prediction models and that serve as input to the VATDM. The third component (TRANSPORT AND DISPERSION) combines input from the other 2 components through the use of VATDM to transport and disperse airborne volcanic ash in the atmosphere as well as depositing it at the surface though various removal mechanisms. Any weakness in one of the components may adversely affect the accuracy of the forecast. In a real-time, operational response context such as exists at the VAACs, the rapid delivery of the modeling results puts some constraints on model resolution and computing time. Efforts are ongoing to evaluate the reliability of VATDM forecasts though the use of various methods, including ensemble techniques. Remote sensing data

  19. Column leaching from biomass combustion ashes

    DEFF Research Database (Denmark)

    Maresca, Alberto; Astrup, Thomas Fruergaard

    2015-01-01

    this study, a fly ash sample from an operating Danish power plant based on wood biomass was collected, chemically characterized and investigated for its leaching release of nutrients and heavy metals. A column leaching test was employed. The strongly alkaline pH of all the collected eluates suggested...... the potential suitability of the ash as a liming material. Although high contents of nutrients were detected, differences in their leaching release were found. Heavy metals were detected within typical literature contents for Nordic countries ashes....

  20. Heavy metals in MSW incineration fly ashes

    DEFF Research Database (Denmark)

    Ferreira, Celia; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.

    2003-01-01

    characterized regarding its physical-chemical properties: pH, solubility, chemical composition, and leaching, amongst others. Results indicate a high alkalinity and the presence of large amounts of calcium, chlorides, sulfates, carbonates, sodium and potassium. Metal concentrations in fly ash are: 6,2 g/kg for...... zinc, 2,4 g/kg for lead, 1,7 g/kg for iron, and 7,9 g/kg for magnesium. Copper, manganese, chromium and cadmium are also present with 546, 338, 104 and 91 mg/kg of fly ash, respectively. These results are extremely important in subsequent studies on the treatment of fly ash....

  1. Electrodialytic removal of heavy metals from fly ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul

    2002-01-01

    The aim of the Ph.D. work was to develop the electrodialytic remediation method for removal of heavy metals from fly ashes. The work was focused on two types of fly ashes: fly ashes from wood combustion and fly ashes from municipal solid waste incineration....

  2. Electrodialytic removal of Cd from biomass combustion fly ash suspensions.

    Science.gov (United States)

    Kirkelund, Gunvor M; Damoe, Anne J; Ottosen, Lisbeth M

    2013-04-15

    Due to relatively high concentrations of Cd, biomass combustion fly ashes often fail to meet Danish legislative requirements for recycling as fertilizer. In this study, the potential of using electrodialytic remediation for removal of Cd from four different biomass combustion fly ashes was investigated with the aim of enabling reuse of the ashes. The ashes originated from combustion of straw (two ashes), wood chips, and co-firing of wood pellets and fuel oil, respectively. A series of laboratory scale electrodialytic remediation experiments were conducted with each ash. The initial Cd concentration in the ashes varied between 8.8 mg Cd/kg (co-firing ash) and 64 mg Cd/kg (pre-washed straw ash), and pH varied from 3.7 (co-firing ash) to 13.3 (wood ash). In spite of such large variations between the ashes, the electrodialytic method showed to be sufficiently robust to treat the ashes so the final Cd concentration was below 2.0mg Cd/kg DM in at least one experiment done with each ash. This was obtained within 2 weeks of remediation and at liquid to solid (L/S) ratios of L/S 16 for the pre-washed straw ash and L/S 8 for the straw, co-firing and wood ash. PMID:23454460

  3. Substantial achievements and prospect in fly ash utilization of China

    Energy Technology Data Exchange (ETDEWEB)

    Li Heng; Zhou Bao-wei [China Fly Ash Tech Development Centre (China)

    1996-08-01

    In 1994, 91.14 million tons of fly ash (including boiler bottom ash) was produced in Chinese coal-fired power plants; but only 37 million tons were used. The utilization of fly ash in embankments, in concretes, as structural fill for civil engineering, in building materials, in agriculture, and fly ash resource recycling is discussed. 11 refs., 7 tabs.

  4. Fly Ash Disposal in Ash Ponds: A Threat to Ground Water Contamination

    Science.gov (United States)

    Singh, R. K.; Gupta, N. C.; Guha, B. K.

    2016-07-01

    Ground water contamination due to deposition of fly ash in ash ponds was assessed by simulating the disposal site conditions using batch leaching test with fly ash samples from three thermal power plants. The periodic analysis of leachates was performed for selected elements, Fe, Cu, Ni, Cr, Pb and Cd in three different extraction solutions to determine the maximum amount that can be leached from fly ash. It was observed that at low pH value, maximum metals are released from the surface of the ash into leachate. The average concentration of these elements found in ground water samples from the nearby area of ash ponds shows that almost all the metals except `Cr' are crossing the prescribed limits of drinking water. The concentration of these elements at this level can endanger public health and environment.

  5. Effect of Fly Ash on the Electrical Conductivity of Concretes

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The fly ash occasionally has high content of iron oxide and carbon that are good electrical conducting components. This paper investigates the effect of the fly ash used as mineral admixtures on the electrical conductivity of concretes. The electrical properties of concretes using 3 kinds of fly ash with different iron oxide contents have been studied. Experimental results show that at the same fly ash dosage the resistivity of concrete using fly ash with high content of iron oxide is slightly lower than that with low content of iron oxide. However, the concrete resistivity after 14d increases as fly ash dosage increases regardless of iron oxide content in fly ash.

  6. Processing the right building materials with fly ash content

    Energy Technology Data Exchange (ETDEWEB)

    Oostendorp, F.E. [EZH (Netherlands)

    1997-12-31

    The use of power station ash and fly ash in construction in the Netherlands is described. Fly ash production by the industry is high, but practically all is used as a building material. The fly ash is used in producing cement, artificial gravel, as an asphalt filter, in concrete, and for special applications. Two processes are used to turn fly ash into artificial gravel. The LYTAG process mixes the ash with pulverized coal and water to form pellets, then ignites the pellets resulting in their sintering. The Aerdelite process mixes dry ash with lime, then blows steam through at 85{degree}C, resulting in a hardening reaction.

  7. Electrodialytic removal of Cd from biomass combustion fly ash

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.; Simonsen, Peter;

    2004-01-01

    fly ashes was studied. Four fly ashes were investigated, originating from combustion of straw (two ashes), wood chips, and co-firing of wood pellets and fuel oil, respectively. One of the straw ashes had been pre-washed and was obtained suspended in water, the other ashes were obtained naturally dry......Due to a high concentration of Cd, biomass combustion fly ash often fails to meet the Danish legislative requirements for recycling on agricultural fields. In this work the potential of using the method Electrodialytic Remediation to reduce the concentration of Cd in different biomass combustion....... The initial Cd concentration in the ashes varied between 8.8 mg Cd/kg DM (co-firing ash) and 64 mg Cd/kg DM (pre-washed straw ash), and pH varied from 3.7 to 13.3. In spite of large differences in ash characteristics, the electrodialytic remediation experiments indicated a good remediation potential...

  8. Ash Decline Assessment in Emerald Ash Borer Infested Natural Forests Using High Spatial Resolution Images

    Directory of Open Access Journals (Sweden)

    Justin Murfitt

    2016-03-01

    Full Text Available The invasive emerald ash borer (EAB, Agrilus planipennis Fairmaire infects and eventually kills endemic ash trees and is currently spreading across the Great Lakes region of North America. The need for early detection of EAB infestation is critical to managing the spread of this pest. Using WorldView-2 (WV2 imagery, the goal of this study was to establish a remote sensing-based method for mapping ash trees undergoing various infestation stages. Based on field data collected in Southeastern Ontario, Canada, an ash health score with an interval scale ranging from 0 to 10 was established and further related to multiple spectral indices. The WV2 image was segmented using multi-band watershed and multiresolution algorithms to identify individual tree crowns, with watershed achieving higher segmentation accuracy. Ash trees were classified using the random forest classifier, resulting in a user’s accuracy of 67.6% and a producer’s accuracy of 71.4% when watershed segmentation was utilized. The best ash health score-spectral index model was then applied to the ash tree crowns to map the ash health for the entire area. The ash health prediction map, with an overall accuracy of 70%, suggests that remote sensing has potential to provide a semi-automated and large-scale monitoring of EAB infestation.

  9. Municipal solid waste ash as a cement raw material substitute

    OpenAIRE

    Somnuk Tangtermsirikul; Pichaya Rachdawong; Kritsada Sisomphon

    2000-01-01

    An investigation of using municipal solid waste (MSW) ash as a cement raw material substitute was performed to evaluate the potential use of ash in construction. The use of incineratior ash in cement production would not only get rid of the ash, but also alleviate many environmental problems, for example, reducing raw materials required for cement production, reducing CO2 emission into the atmosphere, and reducing landfill space requirement for the residue ash disposal. The metallic oxide con...

  10. Electrodialytic removal of Cd from biomass combustion fly ash suspensions

    OpenAIRE

    Kirkelund, Gunvor M.; Ottosen, Lisbeth M.; Damoe, Anne J.

    2013-01-01

    Due to relatively high concentrations of Cd, biomass combustion fly ashes often fail to meet Danish legislative requirements for recycling as fertilizer. In this study, the potential of using electrodialytic remediation for removal of Cd from four different biomass combustion fly ashes was investigated with the aim of enabling reuse of the ashes. The ashes originated from combustion of straw (two ashes), wood chips, and co-firing of wood pellets and fuel oil, respectively. A series of laborat...

  11. AshMeadowsSpeckledDace_CH

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — These data identify the areas where final critical habitat for the Ash Meadows Amargosa pupfish (Cyprinodon nevadensis mionectes) occur. "Nevada, Nye County: Each...

  12. ASH External Web Portal (External Portal)

    Data.gov (United States)

    Department of Transportation — The ASH External Web Portal is a web-based portal that provides single sign-on functionality, making the web portal a single location from which to be authenticated...

  13. NICKEL SPECIATION OF RESIDUAL OIL ASH

    Science.gov (United States)

    EPA GRANT NUMBER: R827649C002Title: Nickel Speciation Of Residual Oil AshInvestigators: Kevin C. Galbreath, John Won, Frank E. Huggins, Gerald P. Huffman, Christopher J. Zygarlicke, Donald L. TomanInstitution: University of North Dakota<...

  14. Heavy metals in MSW incineration fly ashes

    DEFF Research Database (Denmark)

    Ferreira, Celia; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.

    2003-01-01

    characterized regarding its physical-chemical properties: pH, solubility, chemical composition, and leaching, amongst others. Results indicate a high alkalinity and the presence of large amounts of calcium, chlorides, sulfates, carbonates, sodium and potassium. Metal concentrations in fly ash are: 6,2 g/kg for......Incineration is a common solution for dealing with the increasing amount of municipal solid waste (MSW). During the process, the heavy metals initially present in the waste go through several transformations, ending up in combustion products, such as fly ash. This article deals with some issues...... related to the combustion of MSW and the formation of fly ash, especially in what concerns heavy metals. Treatment of the flue gas in air pollution control equipment plays an important role and the basic processes to accomplish this are explained. Fly ash from a semi-dry flue gas treatment system is...

  15. Radiation hygienic aspects of fly ash

    International Nuclear Information System (INIS)

    Starting from measuring values of radioactivity, toxicity, as well as from models of food chains, radionuclide migration and deposition, irradiation doses are calculated in case of release of fly ash to the environment (e.g. from building materials). (orig.)

  16. Volcanic Ash Advisory Database, 1983-2003

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Volcanic ash is a significant hazard to aviation and can also affect global climate patterns. To ensure safe navigation and monitor possible climatic impact, the...

  17. AshMeadowsAmargosaPupfish_CH

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — These data identify the areas where final critical habitat for the Ash Meadows Amargosa pupfish (Cyprinodon nevadensis mionectes) occur. "Nevada, Nye County: Each...

  18. Electrodialytic removal of heavy metals from different fly ashes. Influence of heavy metal speciation in the ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.; Villumsen, Arne

    2003-01-01

    Electrodialytic Remediation has recently been suggested as a potential method for removal of heavy metals from fly ashes. In this work electrodialytic remediation of three different fly ashes, i.e. two municipal solid waste incinerator (MSWI) fly ashes and one wood combustion fly ash was studied in......-moval efficiencies were observed, especially for Pb and Zn. Cd, the sole heavy metal of environmental concern in the wood ash, was found more tightly bonded in this ash than in the two MSWI ashes. It was suggested that complex Cd-silicates are likely phases in the wood ash whereas more soluble, condensed phases are...... lab scale, and the results were discussed in relation to the expected heavy metal speciation in the ashes. In initial leaching experiments the pH-dependent desorption characteristics of the heavy metals Cd, Pb, Zn and Cu were analogous in the two MSWI ashes, and thus it was expected that the...

  19. Electrodialytic removal of heavy metals from different fly ashes. Influence of heavy metal speciation in the ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.; Villumsen, Arne

    2003-01-01

    Electrodialytic Remediation has recently been suggested as a potential method for removal of heavy metals from fly ashes. In this work electrodialytic remediation of three different fly ashes, i.e. two municipal solid waste incinerator (MSWI) fly ashes and one wood combustion fly ash was studied in...... lab scale, and the results were discussed in relation to the expected heavy metal speciation in the ashes. In initial leaching experiments the pH-dependent desorption characteristics of the heavy metals Cd, Pb, Zn and Cu were analogous in the two MSWI ashes, and thus it was expected that the......-moval efficiencies were observed, especially for Pb and Zn. Cd, the sole heavy metal of environmental concern in the wood ash, was found more tightly bonded in this ash than in the two MSWI ashes. It was suggested that complex Cd-silicates are likely phases in the wood ash whereas more soluble, condensed phases are...

  20. Biologic effects of oil fly ash.

    OpenAIRE

    Ghio, Andrew J.; Silbajoris, Robert; Carson, Johnny L.; Samet, James M.

    2002-01-01

    Epidemiologic studies have demonstrated increased human morbidity and mortality with elevations in the concentration of ambient air particulate matter (PM). Fugitive fly ash from the combustion of oil and residual fuel oil significantly contributes to the ambient air particle burden. Residual oil fly ash (ROFA) is remarkable in the capacity to provoke injury in experimental systems. The unique composition of this emission source particle makes it particularly useful as a surrogate for ambient...

  1. Composites based on fly ash and clay

    OpenAIRE

    Fidancevska, Emilija; Jovanov, Vojo; Angusheva, Biljana; Srebrenkoska, Vineta

    2014-01-01

    Fly ash is a waste generated from the coal combustion during the production of electricity in the thermal power plants. It presents industrial by-product containing Technologically Enhanced Natural Occurring Radioactive Materials (TENORM) with the great potential for valorisation (1). Fly ash is successfully utilized in cement and concrete industry (2), also in ceramics industry (3) as component for manufacturing bricks and tiles, and recently there are many investigations for production of g...

  2. Retrieval of ash properties from IASI measurements

    OpenAIRE

    Lucy J. Ventress; Grainger, Don; McGarragh, Gregory; Carboni, Elisa; Smith, Andrew J.

    2016-01-01

    A new optimal estimation algorithm for the retrieval of volcanic ash properties has been developed for use with hyperspectral satellite instruments such as the Infrared Atmospheric Sounding Interferometer (IASI). The retrieval method uses the wavenumber range 680–1200 cm−1, which contains window channels, the CO2 ν2 band (used for the height retrieval), and the O3 ν3 band. Assuming a single infinitely (geometrically) thin ash plume and combining this with...

  3. Ash composition of oils of West Kazakhstan

    Energy Technology Data Exchange (ETDEWEB)

    Bakirova, S.F.; Aleshin, G.N.; Kalinin, S.K.; Kotova, A.V.; Nadirov, N.K.

    1982-01-01

    Results are presented of studying the distribution of trace elements in oils of new fields of West Kazakhstan. It is indicated that for the majority of oils studied, the concentration of trace elements does not depend on the ash content of oils. For resinous asphaltenes and highly sulfur oils of the Buzachi region, there is an increase in the content of iron, vanadium, nickel with a rise in ash content of oils. This is possibly associated with their secondary enrichment with trace elements.

  4. Utilization of pulverized fuel ash in Malta

    International Nuclear Information System (INIS)

    In Malta all of the waste produced is mixed and deposited at various sites around the island. None of these sites were purpose built, and all of the waste is above groundwater level. The landfills are not engineered and do not contain any measures to collect leachate and gases emanating from the disposal sites. Another waste, which is disposed of in landfills, is pulverized fuel ash (PFA), which is a by-product of coal combustion by the power station. This has been disposed of in landfill, because its use has been precluded due to the radioactivity of the ashes. The aim of this study was to analyze the chemical composition of the pulverized fuel ash and to attempt to utilize it as a cement replacement in normal concrete mixes in the construction industry. The levels of radiation emitted from the ashes were measured by gamma spectrometry. The results of this study revealed that although at early ages cement replacement by PFA resulted in a reduction in compressive strength (P = 0), when compared to the reference concrete at later ages the strengths measured on concrete cores were comparable to the reference concrete (P > 0.05). The utilization of PFA up to 20% cement replacement in concrete did not raise the radioactivity of the concrete. In conclusion, utilization of PFA in the construction industry would be a better way of disposing of the ashes rather than controlling the leachate and any radioactivity emitted by the landfilled ashes

  5. Flue gas desulfurization gypsum and fly ash

    International Nuclear Information System (INIS)

    The Cumberland Fossil Plant (CUF) is located in Stewart County, Tennessee, and began commercial operation in 1972. This is the Tennessee Valley Authority's newest fossil (coal-burning) steam electric generating plant. Under current operating conditions, the plant burns approximately seven million tons of coal annually. By-products from the combustion of coal are fly ash, approximately 428,000 tons annually, and bottom ash, approximately 115,000 tons annually. Based on historical load and projected ash production rates, a study was initially undertaken to identify feasible alternatives for marketing, utilization and disposal of ash by-products. The preferred alternative to ensure that facilities are planned for all by-products which will potentially be generated at CUF is to plan facilities to handle wet FGD gypsum and dry fly ash. A number of different sites were evaluated for their suitability for development as FGD gypsum and ash storage facilities. LAW Engineering was contracted to conduct onsite explorations of sites to develop information on the general mature of subsurface soil, rock and groundwater conditions in the site areas. Surveys were also conducted on each site to assess the presence of endangered and threatened species, wetlands and floodplains, archaeological and cultural resources, prime farmland and other site characteristics which must be considered from an environmental perspective

  6. Use of wood ash for road stabilisation

    International Nuclear Information System (INIS)

    Due to warmer winters in Sweden, the bearing capacity of forestry roads has become increasingly problematic in recent years. Road stabilization is needed in order to get timber out from the forests. This usually involves the addition of cement to the road body. However, wood ash is a possible substitute for cement because it has similar properties. Using wood ash has the added advantage of saving landfill space. This paper presented an ongoing laboratory study on leaching and mechanical stability, as well as frost-sensitivity using a 30 per cent ash addition to natural soils for reinforcing a forestry road near Timra in central Sweden. The road was being monitored with regard to environmental impact and mechanical properties. The paper discussed the potential of biofuel ashes and the increasing need to reinforce infrastructure due to climate change. The environmental impact from ash use in road constructions was then addressed. It was concluded that the application of ash in road construction would help to strengthen forest roads, make them more resistant to climatic change and render them accessible year-round. 32 refs., 3 tabs., 2 figs.

  7. Characterization of sintered coal fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    M. Erol; S. Kucukbayrak; A. Ersoy-Mericboyu [Istanbul Technical University, Istanbul (Turkey). Department of Chemical Engineering, Chemical and Metallurgical Engineering Faculty

    2008-06-15

    Can, Catalagzi, Seyitomer and Afsin-Elbistan thermal power plant fly ashes were used to investigate the sintering behavior of fly ashes. For this purpose, coal fly ash samples were sintered to form ceramic materials without the addition of any inorganic additives or organic binders. In sample preparation, 1.5 g of fly ash was mixed in a mortar with water. Fly ash samples were uniaxially pressed at 40 MPa to achieve a reasonable strength. The powder compacts were sintered in air. X-ray diffraction analysis revealed that quartz (SiO{sub 2}), mullite (Al{sub 6}Si{sub 2}O{sub 13}), anorthite (CaAl{sub 2}Si{sub 2}O{sub 8}), gehlenite (Ca{sub 2}Al{sub 2}SiO{sub 7}) and wollastonite (CaSiO{sub 3}) phases occurred in the sintered samples. Scanning electron microscopy investigations were conducted on the sintered coal fly ash samples to investigate the microstructural evolution of the samples. Different crystalline structures were observed in the sintered samples. The sintered samples were obtained having high density, low water adsorption and porosity values. Higher Al{sub 2}O{sub 3} + SiO{sub 2} contents caused to better properties in the sintered materials. 19 refs., 5 figs., 4 tabs.

  8. Wildland fire ash: future research directions

    Science.gov (United States)

    Bodí, Merche B.; Martins, Deborah A.; Cerdà, Artemi; Balfour, Victoria N.; Santin, Cristina; Doerr, Stefan H.; Pereira, Paulo; Mataix-Solera, Jorge

    2014-05-01

    Ash is a key component of the forest fires affected land (Cerdà, 1998; Bodí et al., 2011; Pereira et al., 2013a). Ash controls the hydrological processes and determines the water repellency (Dlapa et al., 2012) and the infiltration rates (Cerdà and Doerr, 2008;). Moreover, ash is the key factor on runoff initiation and then on the soil erosion. Little is known about the impact of ash in different ecosystems, but during the last decade a substantial increase in the papers that show the role of ash in the Earth and Soil System were published (Bodí et al., 2012; Pereira et al., 2013b).. Ash is being found as the key component of the post-fire pedological, geomorphological and hydrological response after forest fires (Fernández et al., 2012; Martín et al., 2012; Bodí et al., 2013; Guénon et al., 2013; Pereira et al., 2013c). A recent State-of-the-Art review about wildland fire ash (Bodí et al., 2014) compiles the knowledge regarding the production, composition and eco-hydro-geomorphic effects of wildland fire ash. In the present paper we indicate the knowledge gaps detected and suggest topics that need more research effort concerning: i) data collection and analysis techniques: a) To develop standardized sampling techniques that allow cross comparison among sites and avoid inclusion of the underlying soil unless the burned surface soil forms part of the ash layer, b) To develop standardized methods to define and characterize ash, including its color, physical properties such as particle size distribution or density, proportion of pyrogenic C, chemical and biological reactivity and persistence in the environment, c) To validate, calibrate and test measurements collected through remote sensing with on-the-ground measurements. ii) ash production, deposition redistribution and fate: d) To untangle the significance of the effects of maximum temperature reached during combustion versus the duration of heating, e) To understand the production of ash by measuring its

  9. Leachability of trace metal elements from fly ashes, and from concrete incorporating fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, M.H. [National University of Singapore (Singapore); Blanchette, M.C. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre; Malhotra, V.M. [Natural Resources Canada, Ottawa, ON (Canada)

    2001-07-01

    Manufacturing portland cement is not environmentally desirable because for every tonne of cement produced, about one tonne of carbon dioxide is released into the atmosphere. This problem can be solved by replacing a portion of portland cement with fly ash, a mineral by-product of burning coal at power generation facilities. A study was conducted to examine the leachability of trace metal elements from a variety of fly ashes from various sources in Canada and the United States along with the concrete incorporating the fly ash. Gold, arsenic, boron, barium cadmium, chromium, copper, mercury, lead and selenium are the regulated elements in leachates. In this study, each of these elements were tested from 9 fly ashes within the limits of the U.S. Environmental Protection Agency and the Canadian regulations for the Transportation of Dangerous Goods. It was shown that in general, but with some exceptions, the leaching of arsenic, boron, nickel and selenium increased with an increase in their content in the fly ash. Arsenic concentration from fly ash obtained from bituminous coal was found to be much higher than that from lignite or from sub-bituminous coal. However, the study also showed that none of the trace metals in the leachates from the fly ash concrete samples exceeded the regulated concentration limits, regardless of the type and percentage of fly ash used. It was concluded that concrete which incorporates fly ash is environmentally stable. It was also concluded that waste product utilization, in terms of using fly ash from power generating facilities, can significantly reduce carbon dioxide emissions when manufacturing portland cement. Typical replacement levels of fly ash in portland cement concrete is about 20 per cent by mass of the total cementitious materials. 10 refs., 14 tabs., 4 figs.

  10. Advanced characterisation of municipal solid waste ashes

    Energy Technology Data Exchange (ETDEWEB)

    Skytte Pedersen, Randi

    2002-12-15

    This report deals with characterisation of Municipal Solid Waste (MSW) ashes from the Danish power plant Maebjergvaerket, Holstebro. MSW has been used as a fuel since the mid 1960's and since then, the MSW incineration plants have experienced operational problems due to deposit formation and corrosion. Inorganic elements tightly or loosely bound in the waste are the main cause of these problems. The tightly bound elements will mainly stay on the grate during combustion, whereas the loosely bound elements are volatilised and recondensed elsewhere in the furnace. Many of the heavy metals form volatile chlorides during the incineration, and the fly ash fraction thus show enrichment in these elements. Presence of chlorides and heavy metals in deposits may cause severe corrosion due to formation of low-melting eutectics. Chlorine gas in the flue gas is also of major concern with respect to corrosion, due to formation of volatile chlorides when chlorine comes in contact with the tube material. Four different ash fractions (bottom ash, super heater ash, economiser ash and fly ash) taken from Maebjergvaerket have been analysed with respect to particle sizes, structures, shapes and composition. The applied methods were scanning electron microscopy (SEM), energy dispersive X-ray analyses (EDX) and mapping, which were used in order to determine sizes, chemical composition and structure of the particles. X-ray powder diffraction (XRD) was used to provide information about crystallography and mineral phases. Chemical analysis was also performed along with a particle size distribution for the fine-grained fractions (economiser and fly ash). The amount of silicates consisting of Ca, Al and Si, were found to decrease through the furnace, whereas the amount of alkali (Na, K) chlorides and heavy metals (Pb, Zn) increased. The bonding in the waste before incineration is the direct cause of this, since silicates are tightly bound and chlorides are loosely bound. There was a

  11. Sulphation characteristics of paper sludge ash

    Energy Technology Data Exchange (ETDEWEB)

    Roh, S.A. [Environmental Systems Research Center, Korea Inst. of Machinery and Materials, Daejeon (Korea, Republic of); Kim, S.D. [Environmental Systems Research Center, Korea Inst. of Machinery and Materials, Daejeon (Korea, Republic of). Dept. of Chemical and Biomolecular Engineering

    2007-04-15

    Landfills are no longer a viable solution for the disposal of sludge produced from waste water treatment plants because of the decrease in available space, rising fees and growing environmental concerns. However, thermal utilization of this waste may be an economic and sustainable disposal solution. Co-combustion of low heating value sludge with fossil fuels has a positive effect for sulfur dioxide (SO{sub 2}) emissions due to the low sulphur content of biomass fuels and increased sulphur retention in the ash. The sulphur retention is attributed to the formation of sulphates, such as CaSO{sub 4}, K{sub 2}SO{sub 4} and Na{sub 2}SO{sub 4}. The amount of fuel-ash-related sulphur sorption increases during co-combustion. Therefore, sorbents for sulphur reduction may not be required if proper control of the biomass feed is maintained. This paper presented a study in which the sulphation characteristics of calcium-rich paper sludge ash were determined for the use of co-combustion of biomass and coal. The calcium in the paper sludge ash came from the limestone filler used in the manufacturing process to increase the density and whiteness of the paper at 2 paper mills in Korea. A thermobalance reactor along with XRD and SEM-EDX were used for the analysis of sulphated ash to determine the effects of sulphation temperature, particle size and SO{sub 2} concentration on sulphation conversion. The activation energy and pre-exponential factor of sulphation reaction of sludge ash were determined based on the uniform-reaction model. X-ray diffraction analysis revealed that most of the sulphation compounds were CaSO{sub 4}. The sulphation occurred uniformly throughout the ash and the CaSO{sub 4} did not block the outer pore of the sludge ash. The uniform distributions of CaO and other inert minerals in the ash resulted in uniform sulphation with good penetration of SO{sub 2} into pores of the sludge ash without pore blocking during sulphation of CaO. 13 refs., 1 tab., 9 figs.

  12. Effect of ash components on the ignition and burnout of high ash coals

    Energy Technology Data Exchange (ETDEWEB)

    Feng, B.; Yan, R.; Zheng, C.G. [Huazhong University of Science and Technology, Wuhan (China). National Laboratory of Coal Combustion

    1998-11-01

    The effect of the ash components on the ignition and burnout of four Chinese high ash coals were studied by thermogravimetric analysis. To investigate the influence of the ash components, comparative experiments were carried out with original, deashed and impregnated coals. Eleven types of ash components, such as SiO{sub 2}, CaCO{sub 3}, MgO, Na{sub 2}CO{sub 3}, K{sub 2}CO{sub 3}, Al{sub 2}O{sub 3}, TiO{sub 2}, Fe{sub 2}O{sub 3}, FeS{sub 2}, NH{sub 4}Fe(SO{sub 4}){sub 2}{center_dot}12H{sub 2}O and FeSO{sub 4},(NH{sub 4}){center_dot}6H{sub 2}O were used in the present study. It was found that most of the ash components have negative effects. The strong influence of some ash components suggests that the combustion characteristics of high ash coal may be determined by the ash composition. 5 refs., 2 figs., 2 tabs.

  13. Scale-Up and Demonstration of Fly Ash Ozonation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Rui Afonso; R. Hurt; I. Kulaots

    2006-03-01

    The disposal of fly ash from the combustion of coal has become increasingly important. When the fly ash does not meet the required specification for the product or market intended, it is necessary to beneficiate it to achieve the desired quality. This project, conducted at PPL's Montour SES, is the first near full-scale ({approx}10 ton/day), demonstration of ash ozonation technology. Bituminous and sub bituminous ashes, including two ash samples that contained activated carbon, were treated during the project. Results from the tests were very promising. The ashes were successfully treated with ozone, yielding concrete-suitable ash quality. Preliminary process cost estimates indicate that capital and operating costs to treat unburned carbon are competitive with other commercial ash beneficiation technologies at a fraction of the cost of lost sales and/or ash disposal costs. This is the final technical report under DOE Cooperative Agreement No.: DE-FC26-03NT41730.

  14. International Database of Volcanic Ash Impacts

    Science.gov (United States)

    Wallace, K.; Cameron, C.; Wilson, T. M.; Jenkins, S.; Brown, S.; Leonard, G.; Deligne, N.; Stewart, C.

    2015-12-01

    Volcanic ash creates extensive impacts to people and property, yet we lack a global ash impacts catalog to organize, distribute, and archive this important information. Critical impact information is often stored in ephemeral news articles or other isolated resources, which cannot be queried or located easily. A global ash impacts database would improve 1) warning messages, 2) public and lifeline emergency preparation, and 3) eruption response and recovery. Ashfall can have varying consequences, such as disabling critical lifeline infrastructure (e.g. electrical generation and transmission, water supplies, telecommunications, aircraft and airports) or merely creating limited and expensive inconvenience to local communities. Impacts to the aviation sector can be a far-reaching global issue. The international volcanic ash impacts community formed a committee to develop a database to catalog the impacts of volcanic ash. We identify three user populations for this database: 1) research teams, who would use the database to assist in systematic collection, recording, and storage of ash impact data, and to prioritize impact assessment trips and lab experiments 2) volcanic risk assessment scientists who rely on impact data for assessments (especially vulnerability/fragility assessments); a complete dataset would have utility for global, regional, national and local scale risk assessments, and 3) citizen science volcanic hazard reporting. Publication of an international ash impacts database will encourage standardization and development of best practices for collecting and reporting impact information. Data entered will be highly categorized, searchable, and open source. Systematic cataloging of impact data will allow users to query the data and extract valuable information to aid in the development of improved emergency preparedness, response and recovery measures.

  15. Ash melting behavior by Fourier transform infrared spectroscopy

    Institute of Scientific and Technical Information of China (English)

    LI Han-xu; QIU Xiao-sheng; TANG Yong-xin

    2008-01-01

    A Fourier Transform Infrared Spectroscopic (FTIR) method involving a Fe2O3 flux was used to learn how China's coal ash melts. The relationship between ash fusion temperature and chemical composition, as well as the effects of Fe2O3 flux on the ash fusion temperature were studied. The relationship between ash fusion temperature and chemical composition, mineralogical phases and functional groups was analyzed with the FTIR method. The results show that the ash fusion temperature is related to the location and transmittance of certain absorption peaks, which is of great significance for the study of ash behavior.

  16. Effects of the addition of oil shale ash and coal ash on physic-chemical properties of CPJ45 cement

    Directory of Open Access Journals (Sweden)

    Nabih K.

    2014-04-01

    Full Text Available We focused our research on recycling industrial wastes, fly ash (F.A, bottom ash (B.A and oil shale ash (S.A in cement production. The study concerns physico-chemical characterization of these products and the influence of their addition on the mechanical proprieties of the CPJ45 cement. XRF allowed us to rank the three additives used according to their contents on major oxides. Coal ashes belong to the class F, and thus possess poozzolanic properties and oil shale ash belongs to the class C and possesses hydraulic and poozolanic properties. The crystalline phases constituting each ash were analysed by XRD. We observe in bottom ash the presence of quartz and mullite. The same crystals are found in fly ash with hematite and magnetite. Oil shale ash is composed of quartz, anhydrite, gehlenite, wollastonite and periclase. The microstructures of fly ash and bottom ash were studied using SEM. The bottom ash was composed respectively of fine particles that are generally irregularly shaped, their dimensions are between 5 and 28μm and of big particles(300 μm. The EDX analysis coupled with an electronic microscope provided some information about the major elements that constitute our samples. The dehydrations of anhydrous and three days hydrated cement were examined by DSC. For hydrated cements we noticed endothermic peaks related to the dehydration of CSH, CH and decomposition of carbonates. The study of the mechanical properties of CPJ45 cement by adding different proportions of fly ash, bottom ash and oil shale ash helped clarifying the percentage of ash that leaded to improve the 28 days mechanical strength. The results show that the cements studied have their maximum mechanical resistance with the addition at 7% of fly ash or 10% of oil shale ash.

  17. Interspecific proteomic comparisons reveal ash phloem genes potentially involved in constitutive resistance to the emerald ash borer.

    Directory of Open Access Journals (Sweden)

    Justin G A Whitehill

    Full Text Available The emerald ash borer (Agrilus planipennis is an invasive wood-boring beetle that has killed millions of ash trees since its accidental introduction to North America. All North American ash species (Fraxinus spp. that emerald ash borer has encountered so far are susceptible, while an Asian species, Manchurian ash (F. mandshurica, which shares an evolutionary history with emerald ash borer, is resistant. Phylogenetic evidence places North American black ash (F. nigra and Manchurian ash in the same clade and section, yet black ash is highly susceptible to the emerald ash borer. This contrast provides an opportunity to compare the genetic traits of the two species and identify those with a potential role in defense/resistance. We used Difference Gel Electrophoresis (DIGE to compare the phloem proteomes of resistant Manchurian to susceptible black, green, and white ash. Differentially expressed proteins associated with the resistant Manchurian ash when compared to the susceptible ash species were identified using nano-LC-MS/MS and putative identities assigned. Proteomic differences were strongly associated with the phylogenetic relationships among the four species. Proteins identified in Manchurian ash potentially associated with its resistance to emerald ash borer include a PR-10 protein, an aspartic protease, a phenylcoumaran benzylic ether reductase (PCBER, and a thylakoid-bound ascorbate peroxidase. Discovery of resistance-related proteins in Asian species will inform approaches in which resistance genes can be introgressed into North American ash species. The generation of resistant North American ash genotypes can be used in forest ecosystem restoration and urban plantings following the wake of the emerald ash borer invasion.

  18. Characteristics of MSWI fly ash during vitrification

    Institute of Scientific and Technical Information of China (English)

    TIAN Shu-lei; WANG Qi; WANG Qun-hui; MA Hong-zhi

    2009-01-01

    The vitrification characteristics of municipal solid waste incinerator (MSWI) fly ash were investigated. Effects of temperature on the binding efficiency of heavy metals, the change of chemical compositions and the weight loss of fly ash in the range of 800 - 1350 ℃ were studied. Toxicity Characteristic Leaching Procedure (TCLP) of the United States was used to analyze the leaching characteristics of heavy metals in fly ash and molten slag. Results indicate that chemical compositions, the weight loss of fly ash and the binding efficiency of heavy metals in fly ash have a tremendous change in the range of 1150 - 1260 ℃. The percentage of CaO, SiO2and AI203 increases with the increasing temperature, whereas it is contrary for SO3 , K2O, Na20 and CI; especially when the temperature is 1260 ℃, the percentage of these four elements decreases sharply from 43.72%to 0. 71%. The weight loss occurs obviously in the range of 1150 - 1260 ℃. Heavy metals of Pb and Cd are almost vaporized above 1000 ℃. Cr is not volatile and its binding efficiency can reach 100% below 1000 ℃. Resuits of TCLP indicate that the heavy metal content of molten slag is beyond stipulated limit values.

  19. Data insertion in volcanic ash cloud forecasting

    Directory of Open Access Journals (Sweden)

    Kate Louise Wilkins

    2015-03-01

    Full Text Available During the eruption of Eyjafjallajökull in April and May 2010, the London Volcanic Ash Advisory Centre demonstrated the importance of infrared (IR satellite imagery for monitoring volcanic ash and validating the Met Office operational model, NAME. This model is used to forecast ash dispersion and forms much of the basis of the advice given to civil aviation. NAME requires a source term describing the properties of the eruption plume at the volcanic source. Elements of the source term are often highly uncertain and significant effort has therefore been invested into the use of satellite observations of ash clouds to constrain them. This paper presents a data insertion method, where satellite observations of downwind ash clouds are used to create effective ‘virtual sources’ far from the vent. Uncertainty in the model output is known to increase over the duration of a model run, as inaccuracies in the source term, meteorological data and the parameterizations of the modelled processes accumulate. This new technique, where the dis- persion model (DM is ‘reinitialized’ part-way through a run, could go some way to addressing this. 

  20. Preliminary Study of Fly Ash Ceramic Process

    International Nuclear Information System (INIS)

    Preliminary study of ceramic production process from two components ofwhich are fly ash and feldspar has been done. Aluminosilicate substancecontained in the fly ash is a basic material a former ceramic body, if itfired at the temperature of 1000 oC forms mullite (3Al2O3.2SiO2). Mulliteis a refractory material which is very stable at the temperature changing.This experiment studies the ceramic production process of two componentsnamely fly ash with particle size of oC.Steps of processes are making paste of fly ash and feldspar, making of greenpellets, and firing of pellets, physical analysis of ceramic including volumedecrease, lost ignition, porosity, density, water sorption, compressivestrength. The experiment result at firing temperature of 1000 oC were shownthat best composition at the weight ratio of fly ash to feldspar are 60/40and 50/50. It physical characteristic respectively are decrease of volume0.54 and 0.69 %, lost ignition = 11.98 and 11.78 %, porosity = 0.159 and0.155, density = 2.05 and 2.06 g/cm3, water sorption = 18.96 and 18.36 %,compressive strength = 24.82 and 24.79 kN/mm2. (author)

  1. Regular Recycling of Wood Ash to Prevent Waste Production (RecAsh). Technical Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Lars E-mail: lars.t.andersson@skogsstyreslen.se

    2007-03-15

    At present, the extraction of harvest residues is predicted to increase in Sweden and Finland. As an effect of the intensified harvesting, the export of nutrients and acid buffering substances from the growth site is also increased. Wood ash could be used to compensate forest soils for such losses. Most wood fuel ash is today often deposited in landfills. If the wood ash is recycled, wood energy is produced without any significant waste production. Ash recycling would therefore contribute to decreasing the production of waste, and to maintaining the chemical quality of forest waters and biological productivity of forest soils in the long term. The project has developed, analysed and demonstrated two regular ash-recycling systems. It has also distributed knowledge gathered about motives for ash recycling as well as technical and administrative solutions through a range of media (handbooks, workshops, field demonstrations, reports, web page and information videos). Hopefully, the project will contribute to decreasing waste problems related to bio-energy production in the EU at large. The project has been organised as a separate structure at the beneficiary and divided in four geographically defined subprojects, one in Finland and three in Sweden (Central Sweden, Northern Sweden, and South-western Sweden). The work in each subproject has been lead by a subproject leader. Each subproject has organised a regional reference group. A project steering committee has been established consisting of senior officials from all concerned partners. The project had nine main tasks with the following main expected deliverables and output: 1. Development of two complete full-scale ash-recycling systems; 2. Production of handbooks of the ash recycling system; 3. Ash classification study to support national actions for recommendations; 4. Organise regional demonstrations of various technical options for ash treatment and spreading; 5. Organise national seminars and demonstrations of

  2. Characteristic of elements in coal bottom ash and fly ash by instrumental neutron activation analysis (INAA)

    International Nuclear Information System (INIS)

    Coal-fired power plant and industrial stacks that using coal produce solid waste such as bottom ash and fly ash. Determination of elements in these wastes qualitatively and quantitatively is usually the first step taken for subsequent evaluation of the associated environmental and biological risks. In this study, the determination of trace elements in bottom ash and fly ash by instrumental neutron activation analysis was carried out. The samples were irradiated at rabbit facility in G.A. Siwabessy reactor with neutron flux ~ 1013 n.cm-2.s-1, and then counted by HPGe spectrometer gamma detector. The validation of method was performed by characterization of standard reference material (SRM) 1633b coal fly ash from National Institute of Standards and Technology (NIST). Some elements such as Al, As, Ce, Co, Cr, Cs, Fe, K, La, Mn, Na, Sc, Sm, Ti and V were detected in both samples. The concentration of environmentally toxic elements, As and Cr in bottom ash were 6.24 and 137.4 mg/kg, whereas in fly ash were 6.37 and 39.0 mg/kg respectively. Arsenic concentrations had been over the standard value based on PP no.85/1999. (author)

  3. Correlation between the critical viscosity and ash fusion temperatures of coal gasifier ashes

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, Peter Y. [National Energy Technology Lab. (NETL), Albany, OR (United States); Kwong, Kyei-Sing [National Energy Technology Lab. (NETL), Albany, OR (United States); Bennett, James [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2015-09-27

    Coal gasification yields synthesis gas, an important intermediate in chemical manufacturing. It is also vital to the production of liquid fuels through the Fischer-Tropsch process and electricity in Integrated Gasification Combined Cycle power generation. Minerals naturally present in coal become molten in entrained-flow slagging gasifiers. Molten coal ash slag penetrates and dissolves refractory bricks, leading to costly plant shutdowns. The extent of coal ash slag penetration and refractory brick dissolution depends on the slag viscosity, the gasification temperature, and the composition of slag and bricks. Here, we measured the viscosity of several synthetic coal ash slags with a high-temperature rotary viscometer and their ash fusion temperatures through optical image analysis. We made all measurements in a carbon monoxide-carbon dioxide reducing atmosphere that approximates coal gasification conditions. Empirical correlation models based on ash fusion temperatures were used to calculate critical viscosity temperatures based on the coal ash compositions. These values were then compared with those obtained from thermodynamic phase-transition models. Finally, an understanding of slag viscosity as a function of ash composition is important to reducing refractory wear in slagging coal gasifiers, which would help to reduce the cost and environmental impact of coal for chemical and electricity production.

  4. Assessing fly ash treatment: Remediation and stabilization of heavy metals

    DEFF Research Database (Denmark)

    Lima, A.T.; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.

    2012-01-01

    Fly ashes from Municipal Solid Waste (MSW), straw (ST) and co-combustion of wood (CW) are here analyzed with the intent of reusing them. Two techniques are assessed, a remediation technique and a solidification/stabilization one. The removal of heavy metals from fly ashes through the...... electrodialytic process (EDR) has been tried out before. The goal of removing heavy metals has always been the reuse of fly ash, for instance in agricultural fields (BEK). The best removal rates are here summarized and some new results have been added. MSW fly ashes are still too hazardous after treatment to even...... consider application to the soil. ST ash is the only residue that gets concentrations low enough to be reused, but its fertilizing value might be questioned. An alternative reuse for the three ashes is here preliminary tested, the combination of fly ash with mortar. Fly ashes have been substituted by...

  5. About the mineralogical composition of Estonian oil shale ash

    International Nuclear Information System (INIS)

    Results of previous research about the mineralogical composition of Estonian oil shale ash focused on using X-ray diffractometry, problems related to oil shale combustion, and utilization of oil shale ashes were analysed. (author)

  6. Market assessment and technical feasibility study of PFBC ash use

    Energy Technology Data Exchange (ETDEWEB)

    Smith, V.E.; Bland, A.E.; Brown, T.H. [Western Research Inst., Laramie, WY (United States); Georgiou, D.N. [Jacques, Whitford and Associates Ltd., Dartmouth, NS (Canada); Wheeldon, J. [Electric Power Research Inst., Palo Alto, CA (United States)

    1994-10-01

    The overall objectives of this study are to determine the market potential and the technical feasibility of using PFBC ash in high volume ash use applications. The information will be of direct use to the utility industry in assessing the economics of PFBC power generation in light of ash disposal avoidance through ash marketing. In addition, the research is expected to result in the generation of generic data on the use of PFBC ash that could lead to novel processing options and procedures. The specific objectives of the proposed research and demonstration effort are: Define resent and future market potential of PFBC ash for a range of applications (Phase I); assess the technical feasibility of PFBC ash use in construction, civil engineering and agricultural applications (Phase II); and demonstrate the most promising of the market and ash use options in full-scale field demonstrations (Phase III).

  7. Environmental risks of biomass ashes application in soils [Resumo

    OpenAIRE

    Freire, M; Lopes, M. Helena; Tarelho, L.

    2014-01-01

    This work presents the potential environmental risks of biomass ashes application in forest soils. The ashes were collected in five industrial biomass thermal plants using different technologies: bubbling fluidized bed combustor and grate furnace.

  8. Wet physical separation of MSWI bottom ash

    OpenAIRE

    Muchova, L.

    2010-01-01

    Bottom ash (BA) from municipal solid waste incineration (MSWI) has high potential for the recovery of valuable secondary materials. For example, the MSWI bottom ash produced by the incinerator at Amsterdam contains materials such as non-ferrous metals (2.3%), ferrous metals (8-13%), gold (0.4 ppm), silver (10 ppm), stainless steel (0.1%) and minerals that can be converted into building products such as aggregates utilized for concrete, asphalt, etc. Since the composition of BA varies from cou...

  9. Changeing of fly ash leachability after grinding

    Science.gov (United States)

    Lakatos, J.; Szabo, R.; Racz, A.; Banhidi, O.; Mucsi, G.

    2016-04-01

    Effect of grinding on the reactivity of fly ash used for geopolymer production was tested. Extraction technique using different alkaline and acidic solutions were used for detect the change of the solubility of elements due to the physical and mechano-chemical transformation of minerals in function of grinding time. Both the extraction with alkaline and acidic solution have detected improvement in solubility in function of grinding time. The enhancement in alkaline solution was approx. 100% in case of Si and Al. The acidic medium able to dissolve the fly ash higher manner than the alkaline, therefore the effect of grinding was found less pronounced.

  10. Solubility and transport of arsenic coal ash

    International Nuclear Information System (INIS)

    An experimental method combined with a numerical model allows a comparison of two methods for the disposal of ash that contains arsenic, from the Rio Escondido coal-fired power plant. The calculation yields significant differences in aquifer migration times for the site. The wet disposal method gave 10 years time and the dry method gave 22 years. Experiments were performed on the rate of dissolution of the arsenic from ash samples; and these results indicate a first order kinetics reaction. 8 refs., 8 figs., 8 tabs

  11. Utilization options for fly ash, bottom ash, and slag in Eastern Europe

    Energy Technology Data Exchange (ETDEWEB)

    Manz, O.E.

    1995-12-01

    Since 1967, at least six ash utilization symposiums have been held in the United States, with papers presented by several European authors on the utilization of coal by-products in Eastern Europe. There is currently over 80,000 megawatts of installed coal-fired capacity available in that region. Unfortunately, of the 117,778,000 tonnes of fly ash, bottom ash, and slag produced in Eastern Europe in 1989, only 13% was utilized. This paper outlines the research and levels and kinds of coal by-product utilization taking place in Eastern Europe since the late 1960s.

  12. Application of Fly Ash from Solid Fuel Combustion in Concrete

    OpenAIRE

    Pedersen, Kim Hougaard; Dam-Johansen, Kim; Jensen, Anker Degn

    2008-01-01

    Application of Fly Ash from Solid Fuel Combustion in Concrete Kim H. Pedersen Abstract Industrial utilization of fly ash from pulverized coal combustion plays an important role in environmentally clean and cost effective power generation. Today, the primary market for fly ash utilization is as pozzolanic additive in the production of concrete. However, the residual carbon in fly ash can adsorb the air entraining admixtures (AEAs) added to enhance air entrainment in concrete in order to increa...

  13. Granulated wood ash to forest soil - Ecological effects

    International Nuclear Information System (INIS)

    This report describes research concerning ecological effects of wood ash recycling to forest soils. The main part of the minerals in the wood fuels are retained in the ashes after combustion. By returning the ashes back to the cleared forest areas, the mineral losses can be reduced. Adding ashes and limestone is a method to vitalize acidified forest soils and restore the production capacity. 48 refs, 26 figs, 8 tabs

  14. Associative properties of 137Cs in biofuel ashes

    International Nuclear Information System (INIS)

    The present study aims to reveal how radiocesium is associated to the ash particles derived from biofuel combustion. A sequential extraction procedure was carried out for the characterisation of radiocesium speciation in ash generated by different fuels and burner types. The ash types considered were fly ash and bottom ash collected from Swedish district heating plants using bark wood or peat as fuel. A fraction of the radiocesium in biofuel ash can easily become solubilised and mobilised by water and also, a significant fraction of the radionuclides can be bound to the ash particles in cation-exchangeable forms. Therefore, at using the ash derived from biofuels to recycle mineral nutrients for forestry or short rotation coppicing, radiocesium solubilised and leached from the ash by rains has a potential to rather quickly enter the rooting zone of forest vegetation or energy crops. On the other hand, radiocesium strongly bound to the ash will migrate slowly into the soil column with the successive accumulation of litter and in the process act to maintain the external dose rate at an elevated level for a long time. The results of the sequential extraction procedure and activity determination of the different extracted fractions implies that the bioavailable fraction of radiocesium in ash from bark, wood or peat is in the range between 20-85% of the total ash contents. Peat ash collected from a powder burner strongly retained a large fraction (70-90%) of its radiocesium content while the peat ash from a continuos fluidized bed type burner retained nearly 100% of the radiocesium in the bottom ash and only about 15% in the fly ash

  15. Optimizing and Characterizing Geopolymers from Ternary Blend of Philippine Coal Fly Ash, Coal Bottom Ash and Rice Hull Ash

    Directory of Open Access Journals (Sweden)

    Martin Ernesto Kalaw

    2016-07-01

    Full Text Available Geopolymers are inorganic polymers formed from the alkaline activation of amorphous alumino-silicate materials resulting in a three-dimensional polymeric network. As a class of materials, it is seen to have the potential of replacing ordinary Portland cement (OPC, which for more than a hundred years has been the binder of choice for structural and building applications. Geopolymers have emerged as a sustainable option vis-à-vis OPC for three reasons: (1 their technical properties are comparable if not better; (2 they can be produced from industrial wastes; and (3 within reasonable constraints, their production requires less energy and emits significantly less CO2. In the Philippines, the use of coal ash, as the alumina- and silica- rich geopolymer precursor, is being considered as one of the options for sustainable management of coal ash generation from coal-fired power plants. However, most geopolymer mixes (and the prevalent blended OPC use only coal fly ash. The coal bottom ash, having very few applications, remains relegated to dumpsites. Rice hull ash, from biomass-fired plants, is another silica-rich geopolymer precursor material from another significantly produced waste in the country with only minimal utilization. In this study, geopolymer samples were formed from the mixture of coal ash, using both coal fly ash (CFA and coal bottom ash (CBA, and rice hull ash (RHA. The raw materials used for the geopolymerization process were characterized using X-ray fluorescence spectroscopy (XRF for elemental and X-ray diffraction (XRD for mineralogical composition. The raw materials’ thermal stability and loss on ignition (LOI were determined using thermogravimetric analysis (TGA and reactivity via dissolution tests and inductively-coupled plasma mass spectrometry (ICP analysis. The mechanical, thermal and microstructural properties of the geopolymers formed were analyzed using compression tests, Fourier transform infra-red spectroscopy (FTIR

  16. AUTOMATION OF THE RESISTIVITY MEASUREMENT FOR FLY ASH

    Science.gov (United States)

    The article describes the automation of the resistivity measurement for fly ash. Fly ash resistivity is an important consideration in the operation of particulate control devices based on electrostatic principles (the higher the resistivity of the fly ash, the more difficult it i...

  17. Ash Deposition Trials at Three Power Stations in Denmark

    DEFF Research Database (Denmark)

    Laursen, Karin; Frandsen, Flemming; Larsen, Ole Hede

    1998-01-01

    the probe temperature did influence the composition of deposits for coals with medium ash deposition propensities. These results may indicate that coals with medium to high ash deposition propensities in existing boilers may cause increasing ash deposit formation in future boilers with higher steam...

  18. 77 FR 55895 - Permanent Closure of Cincinnati Blue Ash Airport

    Science.gov (United States)

    2012-09-11

    ... Federal Aviation Administration Permanent Closure of Cincinnati Blue Ash Airport AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of permanent closure of Cincinnati Blue Ash Airport (ISZ). SUMMARY: The... Cincinnati advising that on August 29, 2012, it was permanently closing Cincinnati Blue Ash Airport...

  19. Evaluation of Pollutant Leaching Potential of Coal Ashes for Recycling

    Science.gov (United States)

    Park, D.; Woo, N. C.; Kim, H.; Yoon, H.; Chung, D.

    2011-12-01

    By 2009, coal ashes produced from coal-based power plants in Korea have been reused as cement supplement materials; however, the rest is mostly disposed in landfills inside the plant properties. Continuous production of coal ashes and limited landfill sites require more recycles of coal ashes as base materials, specifically in constructions of roads and of huge industrial complex. Previous researches showed that coal ashes could contain various metals such as arsenic(As), chromium(Cr), lead(Pb), nickel(Ni), selenium(Se), etc. In this study, we collected four types of bottom ashes and two of fly ashes from four coal-based power plants. These ash samples were tested with distilled water through the column leaching process in oxidized conditions. The column test results were compared with those of total digestion, sequential extraction processes and TCLP. Concentrations of metals in outflows from columns are generally greater in fly ashes than in bottom ashes, specifically for As, Se, B, Sr and SO4. Only one fly ash (J2-F) shows high concentrations of arsenic and selenium in leachate. Sequential extraction results indicate that these metals are in readily soluble forms, such as adsorbed, carbonated, and reducible forms. Results of TCLP analysis indicate no potential contaminants leached from the ashes. In conclusion, recycling of coal combustion ashes could be encouraged with proper tests such as sequential and leaching experiments.

  20. Economic analysis of emerald ash borer (Coleoptera: Buprestidae) management options.

    Science.gov (United States)

    Vannatta, A R; Hauer, R H; Schuettpelz, N M

    2012-02-01

    Emerald ash borer, Agrilus planipennis (Fairmaire) (Coleoptera: Buprestidae), plays a significant role in the health and extent of management of native North American ash species in urban forests. An economic analysis of management options was performed to aid decision makers in preparing for likely future infestations. Separate ash tree population valuations were derived from the i-Tree Streets program and the Council of Tree and Landscape Appraisers (CTLA) methodology. A relative economic analysis was used to compare a control option (do-nothing approach, only removing ash trees as they die) to three distinct management options: 1) preemptive removal of all ash trees over a 5 yr period, 2) preemptive removal of all ash trees and replacement with comparable nonash trees, or 3) treating the entire population of ash trees with insecticides to minimize mortality. For each valuation and management option, an annual analysis was performed for both the remaining ash tree population and those lost to emerald ash borer. Retention of ash trees using insecticide treatments typically retained greater urban forest value, followed by doing nothing (control), which was better than preemptive removal and replacement. Preemptive removal without tree replacement, which was the least expensive management option, also provided the lowest net urban forest value over the 20-yr simulation. A "no emerald ash borer" scenario was modeled to further serve as a benchmark for each management option and provide a level of economic justification for regulatory programs aimed at slowing the movement of emerald ash borer. PMID:22420272

  1. Processing of Sugarcane Bagasse ash and Reactivity of Ash-blended Cement Mortar

    Science.gov (United States)

    Ajay, Goyal; Hattori, Kunio; Ogata, Hidehiko; Ashraf, Muhammad

    Sugarcane bagasse ash (SCBA), a sugar-mill waste, has the potential of a partial cement replacement material if processed and obtained under controlled conditions. This paper discusses the reactivity of SCBA obtained by control burning of sugarcane bagasse procured from Punjab province of India. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were employed to ascertain the amorphousness and morphology of the minerals ash particles. Destructive and non-destructive tests were conducted on SCBA-blended mortar specimens. Ash-blended cement paste specimens were analyzed by XRD, thermal analysis, and SEM methods to evaluate the hydration reaction of SCBA with cement. Results showed that the SCBA processed at 600°C for 5 hours was reactive as ash-blended mortar specimens with up to 15% substitution of cement gave better strength than control specimens.

  2. Root secretion stimulating ash growth in larch-ash mixed forest

    Institute of Scientific and Technical Information of China (English)

    吴俊民; 刘广平; 王晓水; 吴保国

    2000-01-01

    Allelopathic effect of larch (Larix gmelini ) on the ash growth (Fraximus mandshurica) was studied in artificial cultivation tests. The results revealed that the larch root secretion obviously stimulated the ash growth. In order to determine the main stimulation allelochemicals, the chemical composition was analyzed. By contrasting the contents of carbohydrate and aminoacid in root secretion of larch and ash, it was concluded that the carbohydrate and aminoacid were not important stimulation allelochemicals. The organic acid and other components in root secretion of larch and ash were analyzed by GC and GC-MS analysis. The sand culture tests were carried out with selected model compounds. The results showed that benzeneacetic acid, benzenepropionic acid and phenolic acids in root secretion of larch were the main stimulation allelochemicals.

  3. Mössbauer characterization of feed coal, ash and fly ash from a thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Reyes Caballero, F.; Martínez Ovalle, S. A., E-mail: s.agustin.martinez@uptc.edu.co; Moreno Gutiérrez, M. [Universidad Pedagógica y Tecnológica de Colombia, UPTC, Grupo de Física Nuclear Aplicada y Simulación (Colombia)

    2015-06-15

    The aim of this work was apply {sup 57}Fe Transmission Mössbauer Spectroscopy at room temperature in order to study the occurrence of iron-containing mineral phases in: 1) feed coal; 2) coal ash, obtained in different stages of the ASTM D3174 standard method; and 3) fly ash, produced when coal is burned in the TERMOPAIPA IV thermal power plant localized in Boyacá, Colombia. According to obtained results, we can conclude the occurrence of pyrite and jarosite in the feed coal; Fe{sup 2+} and Fe{sup 3+} crystalline paramagnetic phases, superparamagnetic hematite and hematite in coal ash; Fe{sup 2+} and Fe{sup 3+} noncrystalline and crystalline phases, magnetite and hematite in fly ash. Precisely, for a basic understanding, this work discusses some the possible transformations that take place during coal combustion.

  4. Mössbauer characterization of feed coal, ash and fly ash from a thermal power plant

    International Nuclear Information System (INIS)

    The aim of this work was apply 57Fe Transmission Mössbauer Spectroscopy at room temperature in order to study the occurrence of iron-containing mineral phases in: 1) feed coal; 2) coal ash, obtained in different stages of the ASTM D3174 standard method; and 3) fly ash, produced when coal is burned in the TERMOPAIPA IV thermal power plant localized in Boyacá, Colombia. According to obtained results, we can conclude the occurrence of pyrite and jarosite in the feed coal; Fe2+ and Fe3+ crystalline paramagnetic phases, superparamagnetic hematite and hematite in coal ash; Fe2+ and Fe3+ noncrystalline and crystalline phases, magnetite and hematite in fly ash. Precisely, for a basic understanding, this work discusses some the possible transformations that take place during coal combustion

  5. FLY ASH RECYCLE IN DRY SCRUBBING

    Science.gov (United States)

    The paper describes the effects of fly ash recycle in dry scrubbing. (Previous workers have shown that the recycle of product solids improves the utilization of slaked lime--Ca(OH)2--for sulfur dioxide (SO2) removal by spray dryers with bag filters.) In laboratory-scale experimen...

  6. Determination of strontium 90 in milk Ash

    International Nuclear Information System (INIS)

    This report describes a method of determination of 90Sr in milk ashes by extraction of 90Y in TBP. The tests which led to the choice of the operating process are presented together with tire result of an intercomparison. (author)

  7. SODA ASH TREATMENT OF NEUTRALIZED MINE DRAINAGE

    Science.gov (United States)

    Utilization of acid mine drainage (AMD) streams as a source of potable and industrial water has become a major goal of several proposed AMD treatment schemes. From among the various schemes available, the lime neutralization/soda ash softening process was selected for use at Alto...

  8. Phosphorus recovery from sewage sludge char ash

    NARCIS (Netherlands)

    Atienza-Martinez, M.; Gea, G.; Arauzo, J.; Kersten, S.R.A.; Kootstra, A.M.J.

    2014-01-01

    Phosphorus was recovered from the ash obtained after combustion at different temperatures (600 °C, 750 °C and 900 °C) and after gasification (at 820 °C using a mixture of air and steam as fluidising agent) of char from sewage sludge fast pyrolysis carried out at 530 °C. Depending on the leaching con

  9. Lignite and conditioned ash handling systems

    Energy Technology Data Exchange (ETDEWEB)

    Bibolini, P.; Di Giacomo, L.; Ruga, A.M. [Techint (Italy)

    2001-10-01

    This article discusses Techint's latest contract for the engineering and supply of a lignite and conditioned ash handling system. Techint Italimpianti, the materials handling unit of Techint Technologies has served the market for over 40 years as a leading supplier of a range of systems for the handling of iron ore, pellets, coal, cement, bauxite, and aluminium. 6 figs.

  10. Arthur Ashe Jr. Sports Scholars Awards 2011

    Science.gov (United States)

    Elfman, Lois; Walker, Marlon A.

    2011-01-01

    "Diverse: Issues In Higher Education" established the Sports Scholars Awards to honor undergraduate students of color who have made achieving both academically and athletically a winning combination. Inspired by tennis legend Arthur Ashe Jr.'s commitment to education as well as his love for the game of tennis, "Diverse" invites every college and…

  11. Arthur Ashe Jr. Sports Scholars Awards 2010

    Science.gov (United States)

    Elfman, Lois; Ford, William J.

    2010-01-01

    "Diverse: Issues In Higher Education" established the Sports Scholars Awards to honor undergraduate students of color who have made achieving both academically and athletically a winning combination. Inspired by tennis legend Arthur Ashe Jr.'s commitment to education as well as his love for the game of tennis, they invite every college and…

  12. 1997 Arthur Ashe Jr. Sport Scholars Awards.

    Science.gov (United States)

    Roach, Ronald

    1997-01-01

    Winners of the "Black Issues in Higher Education" Arthur Ashe Jr. 1997 athletes of the year, one male and one female, are profiled and Sport Scholars are listed for baseball, softball, basketball, fencing, archery, football, handball, soccer, field hockey, crew, swimming, gymnastics, tennis, squash, golf, volleyball, lacrosse, wrestling, water…

  13. A study on fiy ash: ballistic separation of a fly ash

    OpenAIRE

    Peris Mora, Eduardo; Payá, Jordi; Monzó, José

    1991-01-01

    The object of this study is the characterization of several sized fractions from a "spanish fly ash" originating in the thermoelectric power plant in Andorra (Teruel). Physical (size distributions, densities) chemical (chemical composition) and mineralogical characteristics (X-ray diffractograms and infrared spectra) for those sized fractions have been analyzed. Initial fly ash was ballistically separated (horizontal draft) into four fractions using an aerodynamic tunnel with hori...

  14. Application of polymeric flocculant for enhancing settling of the pond ash particles and water drainage from hydraulically stowed pond ash

    Institute of Scientific and Technical Information of China (English)

    Mishra Devi Prasad; Das Samir Kumar

    2013-01-01

    Delayed settling of the ash particles and poor drainage of water from the pond ash are the major problems faced during the hydraulic stowing of pond ash.In this study the effect of polymeric flocculant on settling of the ash particles and drainage of water during pond ash stowing are investigated.In addition,the parameters,viz.drainage and absorption of water during pond ash stowing are quantified by stowing a mine goaf model with pond ash slurries of five different concentrations added with and without flocculant.The study revealed that addition of only 5 × 10-6 of Sodium Carboxymethyl Cellulose (Na-CMC)flocculant with the pond ash slurries during stowing offers best result in terms of quicker settling of the ash particles and enhanced water drainage from the hydraulically stowed pond ash.Besides,it resulted in drainage of more than 85% of the total water used in the initial 45 min of stowing.The improvement in drainage is caused due to coagulation and flocculation of the pond ash particles because of charge neutralization and particle-particle bridging.This study may provide a basis for estimating the drainage and absorption of water during the real pond ash stowing operation in underground mines.

  15. Availability of residual phosphorus from broiler litter ash and layer manure ash amended soil for Paspalum vaginatum uptake

    Science.gov (United States)

    It has been hypothesized by several scientists that poultry litter ash could be used as a slow releasing phosphorus fertilizer that will become available over time. To test this hypothesis, a greenhouse study was conducted using a broiler litter ash, layer manure ash and calcium phosphate to determ...

  16. Radiobiological waste treatment-ashing treatment and immobilization with cement

    International Nuclear Information System (INIS)

    This report describes the results of the study on the treatment of radioactive biological waste in the China Institute for Radiation Protection (CIRP). The possibility of radiobiological waste treatment was investigated by using a RAF-3 type rapid ashing apparatus together with the immobilization of the resulted ash. This rapid ashing apparatus, developed by CIRP, is usually used for pretreatment of samples prior to chemical analysis and physical measurements. The results show that it can ash 3 kg of animal carcasses a batch, the ashing time is 5-7 h and the ash content is less than 4 wt%. The ashing temperature not exceeding 450 deg. C was used without any risk of high losses of radionuclides. The ash from the rapid ashing apparatus was demonstrated to be immobilized with ordinary silicate cement. The optimum cement/ash/water formulation of the cemented waste form was 35 ± 5 wt% cement, 29 ± 2 wt% water, and 36 ± 6 wt% ash. The performance of the waste form was in compliance with the technical requirements except for impact resistance. Mixing additives in immobilization formulations can improve the performance of the cemented ash waste form. The additives chosen were DH4A flow promoter as a cement additive and vermiculite or zeolite as a supplement. The recommended formulation, i.e. an improved formulation of the cemented ash waste form is that additives DH4A flow promoter and vermiculite (or zeolite) are added on the ground of optimum cement/ash/water formulation of the cemented waste form, the dosage of water, DH4A and vermiculite (or zeolite) is 70 wt%, 0.5 wt% and ≤ 5 wt% of the cement dosage, respectively. The cemented ash waste forms obtained meet all the requirements for disposal. (author). 12 refs, 7 figs, 13 tabs

  17. The adsorption of HCl on volcanic ash

    Science.gov (United States)

    Gutiérrez, Xochilt; Schiavi, Federica; Keppler, Hans

    2016-03-01

    Understanding the interaction between volcanic gases and ash is important to derive gas compositions from ash leachates and to constrain the environmental impact of eruptions. Volcanic HCl could potentially damage the ozone layer, but it is unclear what fraction of HCl actually reaches the stratosphere. The adsorption of HCl on volcanic ash was therefore studied from -76 to +150 °C to simulate the behavior of HCl in the dilute parts of a volcanic plume. Finely ground synthetic glasses of andesitic, dacitic, and rhyolitic composition as well as a natural obsidian from Vulcano (Italy) served as proxies for fresh natural ash. HCl adsorption is an irreversible process and appears to increase with the total alkali content of the glass. Adsorption kinetics follow a first order law with rate constants of 2.13 ṡ10-6 s-1 to 1.80 ṡ10-4 s-1 in the temperature range investigated. For dacitic composition, the temperature and pressure dependence of adsorption can be described by the equation ln ⁡ c = 1.26 + 0.27 ln ⁡ p - 715.3 / T, where c is the surface concentration of adsorbed HCl in mg/m2, T is temperature in Kelvin, and p is the partial pressure of HCl in mbar. A comparison of this model with a large data set for the composition of volcanic ash suggests that adsorption of HCl from the gas phase at relatively low temperatures can quantitatively account for the majority of the observed Cl concentrations. The model implies that adsorption of HCl on ash increases with temperature, probably because of the increasing number of accessible adsorption sites. This temperature dependence is opposite to that observed for SO2, so that HCl and SO2 are fractionated by the adsorption process and the fractionation factor changes by four orders of magnitude over a temperature range of 250 K. The assumption of equal adsorption of different species is therefore not appropriate for deriving volcanic gas compositions from analyses of adsorbates on ash. However, with the experimental

  18. Ash3d: A finite-volume, conservative numerical model for ash transport and tephra deposition

    Science.gov (United States)

    Schwaiger, Hans F.; Denlinger, Roger P.; Mastin, Larry G.

    2012-01-01

    We develop a transient, 3-D Eulerian model (Ash3d) to predict airborne volcanic ash concentration and tephra deposition during volcanic eruptions. This model simulates downwind advection, turbulent diffusion, and settling of ash injected into the atmosphere by a volcanic eruption column. Ash advection is calculated using time-varying pre-existing wind data and a robust, high-order, finite-volume method. Our routine is mass-conservative and uses the coordinate system of the wind data, either a Cartesian system local to the volcano or a global spherical system for the Earth. Volcanic ash is specified with an arbitrary number of grain sizes, which affects the fall velocity, distribution and duration of transport. Above the source volcano, the vertical mass distribution with elevation is calculated using a Suzuki distribution for a given plume height, eruptive volume, and eruption duration. Multiple eruptions separated in time may be included in a single simulation. We test the model using analytical solutions for transport. Comparisons of the predicted and observed ash distributions for the 18 August 1992 eruption of Mt. Spurr in Alaska demonstrate to the efficacy and efficiency of the routine.

  19. Rice Husk Ash Derived Zeolite Blended with Water Hyacinth Ash for Enhanced Adsorption of Cadmium Ions

    Directory of Open Access Journals (Sweden)

    G. W. Mbugua

    2014-08-01

    Full Text Available In order to helpcurtail or imposesustained control to the offensive water hyacinth plant,it is essential to explore ways of generatingwater remediation materials from it. In the current study, the capacity and efficacy of water hyacinth ash (WHA,its insoluble residue (WHAR and rice husk ash (RHAto remove cadmium ionsand methylene blue from contaminated water was investigated. Mixtures of the two ashes were used to formulatezeolitic materialsby hydrothermal reactions. Material A, ZMA was prepared by using rice husk ash and the soluble portion of WHA while for material B, ZMB a mixture of equal amounts the two ashes including the insoluble fraction of WHA were used. Batch experiments was carried out to determine the effect of metal ion concentration, initial PH, contact time (t, temperature (T, shaking speed and adsorbent dose on percentage removal of Cd2+ and methylene blue by the ashes and their zeolitic products. The data obtained for adsorption of Cd2+ on RHA, ZMA, and ZMB was found to best fit in the Langmuir isotherm model while WHA and WHAR data best fitted in theFreundlich model. Adsorption capacities for cadmium on RHA, WHA, WHAR, ZMA and ZMB adsorbents ions were 3.745, 52.00, 56.89, 11.24 and 22.22mg/g respectively.The findings showed that incorporating the WHAR during synthesis of the zeolitic material enhanced its adsorption capacity and efficiency for Cd (II ions and methylene blue.

  20. Ash management in circulating fluidized bed combustors

    Energy Technology Data Exchange (ETDEWEB)

    K. Redemann; E.-U. Hartge; J. Werther [Hamburg University of Technology, Hamburg (Germany). Institute of Solids Process Engineering and Particle Technology

    2008-12-15

    Ash management in fluidized bed combustion systems means keeping the particle size distribution of the bed inventory in a given range. A dynamic particle population balancing model was developed for this purpose. It was successfully applied to a refuse-derived fuel fired combustor and a coal-fired circulating fluidized bed combustor. Both were large-scale commercial units. The model uses the concept of the attrited ash particle size distribution which represents the particle size distribution of the attrited ash including the generated fines and replaces the consideration of the particle attrition in the model calculations. The model offers the possibility to gain additional information about the particle size distributions and the solids mass flows at any location of the fluidized bed system. In addition, the model provides information about the dynamic behavior of the plant and about mean residence times of particle size classes in the plant. Uncertainties about the ash formation characteristics of fuels make the management of the bed inventory a very important issue. In this context the population balancing model is used to predict the plant behavior under various operating conditions. The results of the calculations carried out give useful information about the possibilities to manage the ash inventory of such a plant. It could be shown that the recirculation of a fine fraction of the bottom drain solids is a very effective method to manage the particle size distribution of the bed inventory. The calculation results further reveal that the mean residence time of particles is strongly dependent on their size. 21 refs., 19 figs., 4 tabs.

  1. Hot-Gas Filter Ash Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Dockter, B.A.; Hurley, J.P.; Watne, T.A.; Katrinak, K.A.; O`Keefe, C.A. [North Dakota Univ., Grand Forks, ND (United States). Energy and Minerals Research Center

    1996-12-31

    Large-scale hot-gas testing over the past several years has revealed numerous cases of cake buildup on filter elements that have been difficult, if not impossible to remove. At times, the cake can bridge between candle filters, leading to high filter failure rates. Physical factors, including particle-size distribution, particle shape, the aerodynamics of deposition, and system temperature contribute to difficulty in removing the cake. It is speculated that chemical as well as physical effects are playing a role in leading the ash to bond to the filter or to itself. The Energy and Environmental research Center (EERC) at the University of North Dakota is working with Electric Power Research Institute (EPRI) and a consortium of companies in partnership with the US Department of Energy (DOE) to perform the research necessary to determine the factors that cause hot-gas cleanup filters to be blinded by ash or to develop deposits that can bridge the filters and cause them to fail. The objectives of this overall project are threefold: first, to determine the mechanisms by which difficult-to-clean ash is formed; second, to develop a method to determine the rate of blinding/bridging based on fuel and sorbent properties and operating conditions; finally, to provide suggestions fro ways to prevent filter blinding by the troublesome ash. The projects consists of four tasks: field sampling and archive sample analyses, laboratory-scale testing, bench-scale testing, and model and database development testing. This paper present preliminary data from Task 2 on determining the tensile strengths of coal ash particles at elevated temperatures and simulated combustor gas conditions.

  2. Plutonium dissolution from Rocky Flats Plant incinerator ash

    International Nuclear Information System (INIS)

    Rockwell Hanford Operations (Rockwell) soon will commence recovery of plutonium from Rocky Flats Plant incinerator ash. In preparation for this processing, Rockwell undertook literature and laboratory studies to identify, select and optimize plutonium dissolution methods for treating the ash. Ash reburning, followed by dissolution in nitric acid containing calcium fluoride, was selected as the processing method for the ash. Recommended values of process parameters were identified. Using the selected process, 99.5% plutonium recovery was achieved, leaving about 12.7 wt % heel residue for an equal weight composite of the three ashes tested. 15 refs., 26 figs

  3. Future fly ash marketing; Flugaschevermarktung in der Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Mauder, R.; Hugot, A. [Evonik Power Minerals GmbH, Dinslaken (Germany)

    2008-07-01

    It can be assumed that the fly ash production volumes will undergo a marked increase over the next few years. The conditions of fly ash production will improve as a result of modern and refurbished power plants, yielding a positive effect on the quality of fly ashes. Other vital parameters of future fly ash marketing are fly ash logistics and the infrastructure of power plants. Basically, economic utilisation of the increased production volumes is possible; however, new and long-term strategies are necessary. (orig.)

  4. Analysis list: ash1 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ash1 Cell line + dm3 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/ash1.1.t...sv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/ash1.5.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/ash...1.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/colo/ash1.Cell_line.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/colo/Cell_line.gml ...

  5. Analysis list: ash2 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ash2 Larvae + dm3 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/ash2.1.tsv ...http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/ash2.5.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/ash...2.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/colo/ash2.Larvae.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/colo/Larvae.gml ...

  6. Reducing the environmental impact of Baltic Power Plant ash fields

    International Nuclear Information System (INIS)

    Ash fields of Estonian oil-shale-fired power plants, especially ash hydrotransport system with its large amounts of high-alkaline waters, may cause great damage to the environment. The situation is particularly bad at the Baltic Power Plant whose ash fields and sediment ponds occupy more than ten square kilometers. The samples taken from the 2nd ash field were studied to determine their structure, pressure resistance and water filtration ability. Ash field material has a stratified structure, all layers contain Ca(OH)2 which, contacting with water, makes the latter highly alkaline. According to preliminary calculations, the ash field material binds only 10-20 % of CO2 emitted at oil shale burning. Disconnection of the 2nd ash field from the ash field water-sluicing system would be the first and most practical way to reduce the amount of water to be added to the water system of ash fields. Ca(OH)2 content of ash field material must be considered when making the projects for the 2nd ash field recultivation. (author)

  7. Experimental study on fly ash capture mercury in flue gas

    Institute of Scientific and Technical Information of China (English)

    Mercedes; DíAZ-SOMOANO; Patricia; ABAD-VALLE; M.Rosa; MARTíNEZ-TARAZONA

    2010-01-01

    Systematic experiments were conducted on a fixed-bed reactor to investigate the interaction between fly ash and mercury,the results implied that fly ash can capture mercury effectively.Among different fly ashes,the unburned carbon in the FA2 and FA3 fly ashes has the highest mercury capture capacity,up to 10.3 and 9.36 μg/g,respectively,which is close to that of commercial activated carbon.There is no obvious relationship between mercury content and carbon content or BET surface area of fly ash.Petrography classification standard was applied to distinguish fly ash carbon particles.Carbon content is not the only variable that controls mercury capture on fly ash,there are likely significant differences in the mercury capture capacities of the various carbon forms.Mercury capture capacity mainly depends on the content of anisotropy carbon particles with porous network structure.

  8. Quantification of fusion in ashes from solid fuel combustion

    DEFF Research Database (Denmark)

    Hansen, Lone Aslaug; Frandsen, Flemming; Dam-Johansen, Kim;

    1999-01-01

    which the agreement with fusion as determined by phase diagrams is very good, and for straw (salt-rich) and coal (silicate-rich) ashes. Comparing ash fusion curves to index points of current standard ash fusion tests showed initial melting at temperatures typically between 50 degrees and 100 degrees C......The fusion of ashes produced during solid fuel combustion greatly affects the tendency of these ashes to cause operational problems in utility boilers. In this paper, a new and quantitative laboratory method for assessing the fusion of ashes based on simultaneous thermal analysis, STA, is described....... Using STA, melting is detected as an endothermic reaction involving no change in mass. The measurement signals are transferred into a fusion curve showing the melt fraction in the ash as a function of temperature. This is done either by a simple comparison of the energies used for melting in different...

  9. Chemical composition in relation with biomass ash structure

    Science.gov (United States)

    Holubcik, Michal; Jandacka, Jozef

    2014-08-01

    Biomass combustion can be more complicated like combustion of fossil fuels because it is necessary to solve problems with lower ash melting temperature. It can cause a lot of problems during combustion process. Chemical composition of biomass ash has great impact on sinters and slags creation in ash because it affects structure of heated ash. In this paper was solved relation between chemical composition and structure of heated ash from three types of biomass (spruce wood, miscanthus giganteus and wheat straw). Amount of SiO2, CaO, MgO, Al2O3 and K2O was determined. Structure of heated ash was optically determined after heating to 1000 °C or 1200 °C. Results demonstrated that chemical composition has strong effect on structure and color of heated ash.

  10. Ash transformation during co-firing coal and straw

    DEFF Research Database (Denmark)

    Zheng, Yuanjing; Jensen, Peter Arendt; Jensen, Anker Degn;

    2007-01-01

    Co-firing straw with coal in pulverized fuel boilers can cause problems related to fly ash utilization, deposit formation, corrosion and SCR catalyst deactivation due to the high contents of Cl and K in the ash. To investigate the interaction between coal and straw ash and the effect of coal...... quality on fly ash and deposit properties, straw was co-fired with three kinds of coal in an entrained flow reactor. The compositions of the produced ashes were compared to the available literature data to find suitable scaling parameters that can be used to predict the composition of ash from straw and...... coal co-firing. Reasonable agreement in fly ash compositions regarding total K and fraction of water soluble K was obtained between co-firing in an entrained flow reactor and full-scale plants. Capture of potassium and subsequent release of HCl can be achieved by sulphation with SO2 and more...

  11. Volcanic Ash fall Impact on Vegetation, Colima 2005

    Science.gov (United States)

    Garcia, M. G.; Martin, A.; Fonseca, R.; Nieto, A.; Radillo, R.; Armienta, M.

    2007-05-01

    An ash sampling network was established arround Colima Volcano in 2005. Ash fall was sampled on the North, Northeast, East, Southeast, South, Southwest and West of the volcano. Samples were analyzed for ash components, geochemistry and leachates. Ash fall ocurred on April (12), May (10, 23), June (2, 6, 9, 10, 12, 14), July (27), September (27), October (23) and November (24). Most of the ash is made of andesitic dome-lithics but shows diferences in crystal, juvenile material and lithic content. In May, some samples contained grey and dark pumice (scoria). Texture varies from phi >4 to phi 0. Leachate concentration were low: SO4 (7.33-54.19) Cl- (2.29-4.97) and F- (0.16-0.37). During 2005, Colima Volcano's ash fall rotted some of the guava and peach fruits and had a drying effect on spearment and epazote plants. Even these small ash amounts could have hindered sugar cane and agave growth.

  12. Possibilities of municipal solid waste incinerator fly ash utilisation.

    Science.gov (United States)

    Hartmann, Silvie; Koval, Lukáš; Škrobánková, Hana; Matýsek, Dalibor; Winter, Franz; Purgar, Amon

    2015-08-01

    Properties of the waste treatment residual fly ash generated from municipal solid waste incinerator fly ash were investigated in this study. Six different mortar blends with the addition of the municipal solid waste incinerator fly ash were evaluated. The Portland cement replacement levels of the municipal solid waste incinerator fly ash used were 25%, 30% and 50%. Both, raw and washed municipal solid waste incinerator fly ash samples were examined. According to the mineralogical composition measurements, a 22.6% increase in the pozzolanic/hydraulic properties was observed for the washed municipal solid waste incinerator fly ash sample. The maximum replacement level of 25% for the washed municipal solid waste incinerator fly ash in mortar blends was established in order to preserve the compressive strength properties. Moreover, the leaching characteristics of the crushed mortar blend was analysed in order to examine the immobilisation of its hazardous contents. PMID:26060198

  13. Transformations in oil shale ash at wet deposition

    International Nuclear Information System (INIS)

    Estonian oil shale ash contains chemically active compounds which would undergo different spontaneous transformations in the atmosphere of air. For explaining these processes the system ash-water-air was studied storing moisture samples of ash in laboratory in open-air as well as hermetic conditions. The samples of dry ash formed at pulverized combustion of oil shale at the Baltic Power Plant, and samples obtained from ash storing plateau from different depth of different boreholes were under investigation. Storing conditions as well as the properties of initial samples have a great influence upon the processes taking place at storing of ashes. The results obtained could be used to explain and control the processes taking place at storing of ashes under atmospheric (wet) conditions

  14. Sorption of aqueous phosphorus onto bituminous and lignitous coal ashes

    International Nuclear Information System (INIS)

    Aiming at the development of a phosphorus removal technology for waste water, phosphate (PO43-) retention behavior of bituminous and lignitous coal ashes was investigated using a batch reactor. Ash samples, including fresh and weathered fly and bottom ashes, were studied for their sorption isotherms and reversibility. Fly ashes had a much higher phosphate retention capacity (4000-30,000 mg P/kg) than bottom ashes (15-600 mg P/kg). Lignitous coal ashes were more capable of retaining phosphate than bituminous coal ashes. The retention process was largely irreversible, and the irreversibility increased with the increase in the retention capacity. Weathering enlarged the retention capacity of the bituminous bottom ash, but substantially lowered that of the fly ash, likely due to the difference in the weather-induced changes between the fly and bottom ashes. Sorption isotherms of fly ashes were found to be adequately represented by the Langmuir model while those of bottom ashes fitted better to the Freundlich model. Concentrations of Ca2+ and PO43- in the aqueous phase were measured at the end of sorption and desorption experiments, and were compared with solubilities of three calcium phosphate minerals. The aqueous solutions were saturated or super-saturated with respect to tricalcium phosphate (Ca3(PO4)2) and hydroxyapatite (Ca5(PO4)3OH), and slightly under-saturated with respect to amorphous calcium phosphate. It is concluded that precipitation of calcium phosphate is the predominant mechanism for phosphate retention by coal ash under the conditions studied. There is a strong and positive correlation between alkalinity and phosphate sorption capacity. Consequently, acid neutralization capacity (ANC) can be used as an indicator of phosphate sorption capacity of coal ashes

  15. Sorption of aqueous phosphorus onto bituminous and lignitous coal ashes

    Energy Technology Data Exchange (ETDEWEB)

    Yan Jinying; Kirk, Donald W. [Department of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College Street, Toronto, Ontario, M5S 3E5 (Canada); Jia, Charles Q. [Department of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College Street, Toronto, Ontario, M5S 3E5 (Canada)], E-mail: cqjia@chem-eng.toronto.edu; Liu Xinan [College of Chemical Engineering, Chongqing University, Chongqing (China)

    2007-09-05

    Aiming at the development of a phosphorus removal technology for waste water, phosphate (PO{sub 4}{sup 3-}) retention behavior of bituminous and lignitous coal ashes was investigated using a batch reactor. Ash samples, including fresh and weathered fly and bottom ashes, were studied for their sorption isotherms and reversibility. Fly ashes had a much higher phosphate retention capacity (4000-30,000 mg P/kg) than bottom ashes (15-600 mg P/kg). Lignitous coal ashes were more capable of retaining phosphate than bituminous coal ashes. The retention process was largely irreversible, and the irreversibility increased with the increase in the retention capacity. Weathering enlarged the retention capacity of the bituminous bottom ash, but substantially lowered that of the fly ash, likely due to the difference in the weather-induced changes between the fly and bottom ashes. Sorption isotherms of fly ashes were found to be adequately represented by the Langmuir model while those of bottom ashes fitted better to the Freundlich model. Concentrations of Ca{sup 2+} and PO{sub 4}{sup 3-} in the aqueous phase were measured at the end of sorption and desorption experiments, and were compared with solubilities of three calcium phosphate minerals. The aqueous solutions were saturated or super-saturated with respect to tricalcium phosphate (Ca{sub 3}(PO{sub 4}){sub 2}) and hydroxyapatite (Ca{sub 5}(PO{sub 4}){sub 3}OH), and slightly under-saturated with respect to amorphous calcium phosphate. It is concluded that precipitation of calcium phosphate is the predominant mechanism for phosphate retention by coal ash under the conditions studied. There is a strong and positive correlation between alkalinity and phosphate sorption capacity. Consequently, acid neutralization capacity (ANC) can be used as an indicator of phosphate sorption capacity of coal ashes.

  16. Norm in coal, fly ash and cement

    International Nuclear Information System (INIS)

    Coal is technologically important materials being used for power generation and its cinder (fly ash) is used in manufacturing of bricks, sheets, cement, land filling etc. 222Rn (radon) and its daughters are the most important radioactive and potentially hazardous elements, which are released in the environment from the naturally occurring radioactive material (NORM) present in coal, fly ash and cement. Thus it is very important to carry out radioactivity measurements in coal, fly ash and cement from the health and hygiene point of view. Samples of coal and fly ash from different thermal power stations in northern India and various fly ash using establishments and commercially available cement samples (O.P.C. and P.P.C.) were collected and analyzed for radon concentration and exhalation rates. For the measurements, alpha sensitive LR-115 type II plastic track detectors were used. The radon concentration varied from 147 Bq/m3 to 443 Bq/m3, the radium concentration varied from 1.5 to 4.5 Bq/kg and radon exhalation rate varied from 11.8 mBq.kg-1.h-1 to 35.7 mBq.kg-1.h-1 for mass exhalation rate and from 104.5 mBq.m-2.h-1 to 314.8 mBq.m-2.h-1 for surface exhalation rate in coal samples. The radon concentration varied from 214 Bq/m3 to 590 Bq/m3, the radium concentration varied from 1.0 to 2.7 Bq/kg and radon exhalation rate varied from 7.8 mBq.kg-1.h-1 to 21.6 mBq.kg-1.h-1 for mass exhalation rate and from 138 mBq m-2h-1 to 380.6 mBq.m-2.h-1 for surface exhalation rate in fly ash samples. The radon concentration varied from 157.62 Bq/m3 to 1810.48 Bq/m3, the radium concentration varied from 0.76 Bq/kg to 8.73 Bq/kg and radon exhalation rate varied from 6.07 mBq.kg-1.hr-1 to 69.81 mBq.kg-1.hr-1 for mass exhalation rate and from 107.10 mBq.m-2.hr-1 to 1230.21 mBq.m-2.hr-1 for surface exhalation rate in different cement samples. The values were found higher in P.P.C. samples than in O.P.C. samples. (authors)

  17. Production of ceramics from coal fly ash

    Directory of Open Access Journals (Sweden)

    Angjusheva Biljana

    2012-01-01

    Full Text Available Dense ceramics are produced from fly ash from REK Bitola, Republic of Macedonia. Four types of fly ash from electro filters and one from the collected zone with particles < 0.063 mm were the subject of this research. Consolidation was achieved by pressing (P= 133 MPa and sintering (950, 1000, 1050 and 11000C and heating rates of 3 and 100/min. Densification was realized by liquid phase sintering and solid state reaction where diopside [Ca(Mg,Al(Si,Al2O6] was formed. Ceramics with optimal properties (porosity 2.96±0.5%, bending strength - 47.01±2 MPa, compressive strength - 170 ±5 MPa was produced at 1100ºC using the heating rate of 10ºC/min.

  18. Fundamental study of low-NOx combustion fly ash utilization

    International Nuclear Information System (INIS)

    This study is principally concerned with characterizing the organic part of coal combustion fly ashes. High carbon fly ashes are becoming more common as by-products of low-NOx combustion technology, and there is need to learn more about this fraction of the fly ash. The project team consists of two universities, Brown and Princeton, and an electrical utility, New England Power. A sample suite of over fifty fly ashes has been gathered from utilities across the United States, and includes ashes from a coals ranging in rank from bituminous to lignite. The characterizations of these ashes include standard tests (LOI, Foam Index), as well as more detailed characterizations of their surface areas, porosity, extractability and adsorption behavior. The ultimate goal is, by better characterizing the material, to enable broadening the range of applications for coal fly ash re-use beyond the current main market as a pozzolanic agent for concretes. The potential for high carbon-content fly ashes to substitute for activated carbons is receiving particular attention. The work performed to date has already revealed how very different the surfaces of different ashes produced by the same utility can be, with respect to polarity of the residual carbon. This can help explain the large variations in acceptability of these ashes as concrete additives

  19. Optical properties of volcanic ash: improving remote sensing observations.

    Science.gov (United States)

    Whelley, Patrick; Colarco, Peter; Aquila, Valentina; Krotkov, Nickolay; Bleacher, Jake; Garry, Brent; Young, Kelsey; Rocha Lima, Adriana; Martins, Vanderlei; Carn, Simon

    2016-04-01

    Many times each year explosive volcanic eruptions loft ash into the atmosphere. Global travel and trade rely on aircraft vulnerable to encounters with airborne ash. Volcanic ash advisory centers (VAACs) rely on dispersion forecasts and satellite data to issue timely warnings. To improve ash forecasts model developers and satellite data providers need realistic information about volcanic ash microphysical and optical properties. In anticipation of future large eruptions we can study smaller events to improve our remote sensing and modeling skills so when the next Pinatubo 1991 or larger eruption occurs, ash can confidently be tracked in a quantitative way. At distances >100km from their sources, drifting ash plumes, often above meteorological clouds, are not easily detected from conventional remote sensing platforms, save deriving their quantitative characteristics, such as mass density. Quantitative interpretation of these observations depends on a priori knowledge of the spectral optical properties of the ash in UV (>0.3μm) and TIR wavelengths (>10μm). Incorrect assumptions about the optical properties result in large errors in inferred column mass loading and size distribution, which misguide operational ash forecasts. Similarly, simulating ash properties in global climate models also requires some knowledge of optical properties to improve aerosol speciation.

  20. Application of solid ash based catalysts in heterogeneous catalysis.

    Science.gov (United States)

    Wang, Shaobin

    2008-10-01

    Solid wastes, fly ash, and bottom ash are generated from coal and biomass combustion. Fly ash is mainly composed of various metal oxides and possesses higher thermal stability. Utilization of fly ash for other industrial applications provides a cost-effective and environmentally friendly way of recycling this solid waste, significantly reducing its environmental effects. On the one hand, due to the higher stability of its major component, aluminosilicates, fly ash could be employed as catalyst support by impregnation of other active components for various reactions. On the other hand, other chemical compounds in fly ash such as Fe2O3 could also provide an active component making fly ash a catalyst for some reactions. In this paper, physicochemical properties of fly ash and its applications for heterogeneous catalysis as a catalyst support or catalyst in a variety of catalytic reactions were reviewed. Fly-ash-supported catalysts have shown good catalytic activities for H2 production, deSO(x), deNO(x), hydrocarbon oxidation,and hydrocracking, which are comparable to commercially used catalysts. As a catalyst itself, fly ash can also be effective for gas-phase oxidation of volatile organic compounds, aqueous-phase oxidation of organics, solid plastic pyrolysis, and solvent-free organic synthesis. PMID:18939526

  1. Durability of high volume fly ash concrete

    OpenAIRE

    Camões, Aires

    2006-01-01

    It is well known that the concrete industry has to contribute to the sustainability of construction. For this intent it is necessary to reduce the cement content without compromising the durability requirements of the concrete constructions. Therefore, large scale cement replacement in concrete by by products such as fly ash will be extremely beneficial from the overall ecological and environmental point of view. In this context, an experimental research work was carried out focused on the...

  2. Our silent enemy: ashes in our libraries

    OpenAIRE

    DeBakey, Lois; DeBakey, Selma

    1989-01-01

    Scholars, scientists, physicians, other health professionals, and librarians face a crucial decision today: shall we nourish the biomedical archives as a viable and indispensable source of information, or shall we bury their ashes and lose a century or more of consequential scientific history? Biomedical books and journals published since the 1850s on self-destructing acidic paper are silently and insidiously scorching on our shelves. The associated risks for scientists and physicians are ser...

  3. Thermal resistance of foamed fluidized bed ashes

    Czech Academy of Sciences Publication Activity Database

    Hanzlíček, Tomáš; Perná, Ivana

    2011-01-01

    Roč. 8, č. 2 (2011), s. 115-122. ISSN 1214-9705 R&D Projects: GA AV ČR IAA300460702 Institutional research plan: CEZ:AV0Z30460519 Keywords : thermal resistance * fluidized bed ash * XRD Subject RIV: DM - Solid Waste and Recycling Impact factor: 0.530, year: 2011 http://www.irsm.cas.cz/abstracts/AGG/02_11/2_Hanzlicek.pdf

  4. HHS 440 Ash Material- hhs440dotcom

    OpenAIRE

    VEERU2

    2015-01-01

    HHS 440 Week 1 DQ 1 Technology for Healthcare Professionals (Ash) For more course tutorials visit www.hhs440.com   Technology for Healthcare Professionals. Describe the reasons healthcare professionals need to be familiar with the most current computer hardware and software, networking, wireless technology, and to maintain a high level of computer literacy. § How will this aptitude assist you as a health and human service worker to provide client care that is mor...

  5. Mesoporous Silica from Rice Husk Ash

    OpenAIRE

    V.R. Shelke; S.S. Bhagade; S.A. Mandavgane

    2011-01-01

    Mesoporous silica is used as a raw material in several areas: in preparation of catalysts, in inks, as a concrete hardening accelerator, as a component of detergents and soaps, as a refractory constituent etc. Sodium silicate is produced by reacting rice hull ash (RHA) with aqueous NaOH and silica is precipitated from the sodium silicate by acidification. In the present work, conversion of about 90% of silica contained in RHA into sodium silicate was achieved in an open system at temperatures...

  6. Potential fly-ash utilization in agriculture: A global review

    Energy Technology Data Exchange (ETDEWEB)

    Basu, M.; Pande, M.; Bhadoria, P.B.S.; Mahapatra, S.C. [SGS India Private Ltd., Gurgaon (India). Agricultural Services

    2009-10-15

    Disposal of high amount of fly-ash from thermal power plants absorbs huge amount of water, energy and land area by ash ponds. In order to meet the growing energy demand, various environmental, economic and social problems associated with the disposal of fly-ash would continue to increase. Therefore, fly-ash management would remain a great concern of the century. Fly-ash has great potentiality in agriculture due to its efficacy in modification of soil health and crop performance. The high concentration of elements (K, Na, Zn, Ca, Mg and Fe) in fly-ash increases the yield of many agricultural crops. But compared to other sectors, the use of fly-ash in agriculture is limited. An exhaustive review of numerous studies of last four decades took place in this paper, which systematically covers the importance, scope and apprehension regarding utilization of fly-ash in agriculture. The authors concluded that though studies have established some solutions to handle the problems of radioactivity and heavy metal content in fly-ash, long-term confirmatory research and demonstration are necessary. This paper also identified some areas, like proper handling of dry ash in plants as well as in fields, ash pond management (i.e., faster decantation, recycling of water, vertical expansion rather than horizontal), monitoring of soil health, crop quality, and fate of fly-ash in time domain, where research thrust is required. Agricultural lime application contributes to global warming as Intergovernmental Panel on Climate Change (IPCC) assumes that all the carbon in agricultural lime is finally released as CO{sub 2} to the atmosphere. It is expected that use of fly-ash instead of lime in agriculture can reduce net CO{sub 2} emission, thus reduce global warming also.

  7. Embankment over fly ash pond at Portsmouth Power Station

    International Nuclear Information System (INIS)

    The fly ash and bottom ash sediments from the Portsmouth Power Station in Portsmouth, Virginia were being sluiced into a 39 acre diked ash pond near the plant. When the ash level within the pond was an average of 4 feet below the crest of the dike, it was decided to enlarge the capacity of the disposal area. The plant was about to convert to dry ash disposal, and thus, the plan was to construct a 30-foot high fly ash embarkment over the previously ponded ash. To meet regulatory guidelines, the conversion from wet to dry disposal of fly ash required that the existing ''wet'' pond area be ''closed'' with an impermeable cover and that the new ''dry'' area have an impervious liner (a cover-liner system). This posed potential drainage constraints necessitating an underdrain system below the cover-liner system. The design had to address the stability of the new 30-foot ash embankment constructed over confined, saturated ponded ash and not adversely affect the stability of the perimeter dike. The design also had to provide for interim storage of sluiced fly ash, which resulted in a new inner perimeter dike (inside the existing main dike) and for long term storage for sluiced bottom ash. The sluiced bottom ash would be collected in a small segmented diked pond within the existing main dike. This paper describes the subsurface exploration, stability evaluation, underdrains, design, instrumentation results, and problems encountered during construction of this converted disposal area which extended the life of the facility a minimum of five years

  8. The dissolution of granulated wood ash in forest soils

    International Nuclear Information System (INIS)

    The purpose of this study was to examine the dissolution of granulated wood ash in forest soils. The study was based on comparison between ash granules collected from different forest sites and the original granules. The sites differed in drainage conditions and type of vegetation. The ash granules were spread 1 to 3 years before sampling. Three different types of ash granules were studied. One ash was granulated by adding molasses and lignosulfonate, the second by adding cement and the third by adding only water. The result of this study shows that the ash granulated with the water soluble binders molasses and lignosulfonate, was more easily dissolved than the other two granulated ashes. The former type of ash was almost totally dissolved after three years in moist environment and it had increased the pH level by 1.4 units in the humus layer of well drained sites. The ash granulated with cement did not influence the pH level in the humus layer during a two year period. The granules without any extra binders were almost as hard and insoluble as the granules with cement added. Independent of granulation method the soluble salts in the ash were quickly leached from the granules. This led to a decrease in the relative contents of K, Na, S and Cl during the time after spreading. In the ash granulated with water soluble binders, the relative alkalinity content and the relative contents of Ca and Mg decreased approximately by 20 % during the time after spreading. Corresponding figures for the other two ashes was only a few percent. During the time after spreading the relative contents of Al, Fe, P and the heavy metals Zn, Pb, Cr and Cd has increased, by approximately 30 %, in the ash granulated with water soluble binders. (25 refs., 5 figs., 13 tabs.)

  9. Aerodynamic characteristics of popcorn ash particles

    Energy Technology Data Exchange (ETDEWEB)

    Cherkaduvasala, V.; Murphy, D.W.; Ban, H.; Harrison, K.E.; Monroe, L.S. [University of Alabama, Birmingham, AL (United States). Dept. of Mechanical Engineering

    2007-07-01

    Popcorn ash particles are fragments of sintered coal fly ash masses that resemble popcorn in low apparent density. They can travel with the flow in the furnace and settle on key places such as catalyst surfaces. Computational fluid dynamics (CFD) models are often used in the design process to prevent the carryover and settling of these particles on catalysts. Particle size, density, and drag coefficient are the most important aerodynamic parameters needed in CFD modeling of particle flow. The objective of this study was to experimentally determine particle size, shape, apparent density, and drag characteristics for popcorn ash particles from a coal-fired power plant. Particle size and shape were characterized by digital photography in three orthogonal directions and by computer image analysis. Particle apparent density was determined by volume and mass measurements. Particle terminal velocities in three directions were measured in water and each particle was also weighed in air and in water. The experimental data were analyzed and models were developed for equivalent sphere and equivalent ellipsoid with apparent density and drag coefficient distributions. The method developed in this study can be used to characterize the aerodynamic properties of popcorn-like particles.

  10. Quantitative determination of phases in the alkali activation of fly ash. Part I. Potential ash reactivity

    Energy Technology Data Exchange (ETDEWEB)

    A. Fernandez-Jimenez; A.G. de la Torre; A. Palomo; G. Lopez-Olmo; M.M. Alonso; M.A.G. Aranda [Eduardo Torroja Institute (CSIC), Madrid (Spain)

    2006-03-15

    The various (vitreous and crystalline) components of two type F fly ashes are quantified in this paper using three techniques: chemical analysis with selective solutions, X-ray powder diffraction combined with the Rietveld method and nuclear magnetic resonance. The findings confirm the suitability of the techniques to pursue the objectives while providing further insight into the chemical composition of the vitreous phase of the ash as well as an understanding of the thermal history of these materials. Finally, the paper corroborates the grounds established in prior research for regarding the glassy constituents of an ash to be instrumental in the control of its alkali reactivity during the manufacture of 'alkaline cements'. 24 refs., 9 figs., 4 tabs.

  11. Crowdsourcing genomic analyses of ash and ash dieback – power to the people

    Directory of Open Access Journals (Sweden)

    MacLean Dan

    2013-02-01

    Full Text Available Abstract Ash dieback is a devastating fungal disease of ash trees that has swept across Europe and recently reached the UK. This emergent pathogen has received little study in the past and its effect threatens to overwhelm the ash population. In response to this we have produced some initial genomics datasets and taken the unusual step of releasing them to the scientific community for analysis without first performing our own. In this manner we hope to ‘crowdsource’ analyses and bring the expertise of the community to bear on this problem as quickly as possible. Our data has been released through our website at oadb.tsl.ac.uk and a public GitHub repository.

  12. Desulfurization of flue gases by oil shale ash

    International Nuclear Information System (INIS)

    The possibility of using different ashes (furnace ash, cyclone ash) at the Estonian and Baltic Thermal Power Plants in recycle as a reagent for deeper desulfurization of flue gases and the ways of their activation (crushing, hydratation) were studied. The experiments were carried out in a derivatograph, a laboratory tube furnace and a fluidized bed kiln; different methods of analysis (chemical, X-ray, BET dynamic desorption, SEM, ion chromatography, etc.) were used. The optimum temperature interval for SO2 removal from the gas phase in the fluidized bed conditions for ashes without previous activation is 750-850 deg C and for hydrated ashes 550-850 deg C. The maximum SO2 removal efficiency up to 75% was achieved by using hydrated furnace ash, which means that the total SO2 removal efficiency increased accordingly, up to 95%. (author). 3 tabs., 5 figs., 9 refs

  13. Application of Fly Ash from Solid Fuel Combustion in Concrete

    DEFF Research Database (Denmark)

    Pedersen, Kim Hougaard

    2008-01-01

    in the feeding phase or during the combustion process, which gave rise to increased formation of soot. A low-NOx tangential fired 875 MWth power plant burning bituminous coal have been operated under extreme conditions in order to test the impact of the operating conditions on fly ash adsorption behavior and NOx......Application of Fly Ash from Solid Fuel Combustion in Concrete Kim H. Pedersen Abstract Industrial utilization of fly ash from pulverized coal combustion plays an important role in environmentally clean and cost effective power generation. Today, the primary market for fly ash utilization...... with implementation of low-NOx combustion technologies. The present thesis concerns three areas of importance within this field: 1) testing of fly ash adsorption behavior; 2) the influence of fuel type and combustion conditions on the ash adsorption behaviour including full-scale experiments at the power plant...

  14. Potential fly-ash utilization in agriculture: A global review

    Institute of Scientific and Technical Information of China (English)

    Manisha Basu; Manish Pande; P.B.S. Bhadoria; S.C. Mahapatra

    2009-01-01

    Though in last four decades various alternate energy sources have come into the limelight, the hyperbolic use of coal as a prime energy source cannot be counterbalanced. Disposal of high amount of fly-ash from thermal power plants absorbs huge amount of water, energy and land area by ash ponds. In order to meet the growing energy demand, various environmental, economic and social problems associated with the disposal of fly-ash would continue to increase. Therefore, fly-ash management would remain a great concern of the century. Fly-ash has great potentiality in agriculture due to its efficacy in modification of soil health and crop performance. The high concentration of elements (K, Na, Zn, Ca, Mg and Fe) in fly-ash increases the yield of many agricultural crops. But compared to other sectors, the use of fly-ash in agriculture is limited. An exhaustive review of numerous studies of last four decades took place in this paper, which systematically covers the importance, scope and apprehension regarding utilization of fly-ash in agriculture. The authors concluded that though studies have established some solutions to handle the problems of radioactivity and heavy metal content in flyash, long-term confirmatory research and demonstration are necessary. This paper also identified some areas, like proper handling of dry ash in plants as well as in fields, ash pond management (i.e., faster decantation, recycling of water, vertical expansion rather than horizontal), monitoring of soil health, crop quality, and fate of fly-ash in time domain, where research thrust is required. Agricultural lime application contributes to global warming as Intergovernmental Panel on Climate Change (IPCC) assumes that all the carbon in agricultural lime is finally released as CO2to the atmosphere. It is expected that use of fly-ash instead of lime in agriculture can reduce net CO2emission, thus reduce global warming also.

  15. Geoenvironmental aspects of coal refuse-fly ash blends

    OpenAIRE

    Albuquerque, Allwyn J.

    1994-01-01

    The separate land disposal of coal refuse and fly ash presents difficulties throughout the Appalachian region, both in terms of disposal costs per acre and in terms of its potential environmental impacts on soil, ground water, revegetation, and slope stability. The purpose of this study was to determine how fly ash addition to coal refuse would impact on certain geotechnical properties of the refuse disposal piles, and whether the refuse-fly ash blends would be suitable as co-d...

  16. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  17. Electrodialytic removal of Cd from biomass combustion fly ash suspensions

    DEFF Research Database (Denmark)

    Kirkelund, Gunvor M.; Ottosen, Lisbeth M.; Damoe, Anne J.

    2013-01-01

    the final Cd concentration was below 2.0. mg Cd/kg DM in at least one experiment done with each ash. This was obtained within 2 weeks of remediation and at liquid to solid (L/S) ratios of L/S 16 for the pre-washed straw ash and L/S 8 for the straw, co-firing and wood ash. © 2013 Elsevier B.V....

  18. Sorption of microquantities of scandium from ash dumps

    International Nuclear Information System (INIS)

    The extraction of scandium from ash-slug wastes is studied. Three variants of ion-exchange technology for the treatment are studied and elaborated on a bench scale. The aspects include leaching, loading capacity, kinetics and elution of scandium with the ampholyte resine AFI-21. The 98% recovery of scandium from liquid phase of pulp resulting by sulfuric acid leaching of ashes is obtained. The concentration of scandium in the precipitated crude concentrate is four thousand times higher than that in ashes

  19. Corrosion of Modified Concrete with Sugar Cane Bagasse Ash

    OpenAIRE

    Núñez-Jaquez, R. E.; J. E. Buelna-Rodríguez; C. P. Barrios-Durstewitz; Gaona-Tiburcio, C.; Almeraya-Calderón, F.

    2012-01-01

    Concrete is a porous material and the ingress of water, oxygen, and aggressive ions, such as chlorides, can cause the passive layer on reinforced steel to break down. Additives, such as fly ash, microsilica, rice husk ash, and cane sugar bagasse ash, have a size breakdown that allows the reduction of concrete pore size and, consequently, may reduce the corrosion process. The objective of this work is to determine the corrosion rate of steel in reinforced concrete by the addition of 20% sugar ...

  20. Satellite data assimilation to improve forecasts of volcanic ash concentrations

    OpenAIRE

    Fu, Guangliang; Lin, Hai-Xiang; Heemink, Arnold; SEGERS Arjo; Prata, Fred; Lu, Sha

    2016-01-01

    Data assimilation is a powerful tool that requires available observations to improve model forecast accuracy. Infrared satellite measurements of volcanic ash mass loadings are often used as input observations into the assimilation scheme. However, these satellite-retrieved data are often two-dimensional (2D), and cannot be easily combined with a three-dimensional (3D) volcanic ash model to continuously improve the volcanic ash state in a data assimilation system. By integrating available data...

  1. Ash chemistry and sintering, verification of the mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Hupa, M.; Skrifvars, B.J. [Aabo Akademi, Turku (Finland)

    1996-12-01

    In this project four sintering mechanisms have been studied, i.e., partial melting with a viscous liquid, partial melting with a non-viscous liquid, chemical reaction sintering and solid state sintering. The work has aimed at improving the understanding of ash sintering mechanisms and quantifying their role in combustion and gasification. The work has been oriented in particular on the understanding of biomass ash behavior. The work has not directly focused on any specific technical application. However, results can also be applied on other fuels such as brown coal, petroleum coke, black liquor and different types of wastes (PDF, RDF, MSW). In one part of study the melting behavior was calculated for ten biomass ashes and compared with lab measurements of sintering tendencies. The comparison showed that the T{sub 15} temperatures, i.e. those temperatures at which the ashes contained 15 % molten phase, correlated fairly well with the temperature at which the sintering measurements detected sintering. This suggests that partial melting can be predicted fairly accurate for some ashes already with the today existing thermodynamic calculation routines. In some cases, however the melting calculations did not correlate with the detected sintering temperatures. In a second part detailed measurements on ash behavior was conducted both in a semi full scale CFB and a lab scale FBC. Ashes and deposits were collected and analyzed in several different ways. These analyses show that the ash chemistry shifts radically when the fuel is shifted. Fuels with silicate based ashes behaved totally different than those with an oxide or salt based ash. The chemistry was also affected by fuel blending. The ultimate goal has been to be able to predict the ash thermal behavior during biomass thermal conversion, using the fuel and ash elemental analyses and a few operational key parameters as the only input data. This goal has not yet today been achieved. (author)

  2. Ash accumulation effects using bench marked 0-D model

    International Nuclear Information System (INIS)

    Ash accumulation is a key issue relative to our ability to achieve D-3He ARIES III burn conditions. 1-1/2-d transport simulations using the BALDUR code have been used to examine the correlation between the global ash particle confinement time and the edge exhaust (or recycling) efficiency. This provides a way to benchmark the widely used 0-D model. The burn conditions for an ARIES-III plasma with various ash edge recycling coefficients are examined

  3. Lead isotopic compositions of ash sourced from Australian bushfires

    International Nuclear Information System (INIS)

    This study identifies natural and industrial lead remobilized in ash deposits from three bushfires in relatively pristine areas of Australia in 2011 using lead isotopic compositions (208Pb/207Pb; 206Pb/207Pb). Lead concentrations in the ash ranged from 1 to 36 mg/kg, bracketing the range of lead (4–23 mg/kg) in surface soils (0–2 cm), subsurface (40–50 cm) soils and rocks. The lead isotopic compositions of ash and surface soil samples were compared to subsurface soils and local bedrock samples. The data show that many of the ash and surface soil lead isotopic compositions were a mixture of natural lead and legacy industrial lead depositions (such as leaded petrol combustion). However, some of the ash samples at each of the sites had lead isotopic compositions that did not fit a simple two end-member mixing model, indicating other, unidentified sources. - Highlights: • Lead isotopic compositions of ash deposits from wildfires in Australia were measured. • Not all ash lead isotopic compositions matched those of local soil and rock. • Ash lead was sourced from a mixture of natural and industrial sources. • The major industrial source was identified as depositions from historic leaded petrol. - This study shows that industrial lead is remobilized from large old trees in ash deposits following wildfires

  4. Effect of refractory agent on ash fusibility temperatures of briquette

    Institute of Scientific and Technical Information of China (English)

    Guo-xing CUI; Kui HUANG; Ming-sui LIN

    2013-01-01

    To solve the problem of the low ash fusion point of briquette,this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash,which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air.The effects of Al2O3,SiO2,kaolin,dry powder and bentonite on ash fusibility temperatures were studied,based upon the relationship between briquette ash components and ash fusibility.The results show that the increasing of ash fusibility temperatures by adding the same amount (11%,w)of refractory agents follows the sequence of SiO2,bentonite,dry powder,kaolin,Al2O3,with the softening temperatures beingelevated by 37.2,57.6,60.4,82.6 and 104.4 ℃.With the same ratio of SiO2/Al2O3 in briquette,adding the Al2O3 component is more effective than SiO2 for raising ash fusibility temperatures.In this paper,inexpensive kaolin and bentonite rich in Al2O3 are found to be better refractory agents,and the suitable adding quantities are 9% and 11%,respectively.

  5. The Cement Solidification of Municipal Solid Waste Incineration Fly Ash

    Institute of Scientific and Technical Information of China (English)

    HOU Haobo; HE Xinghua; ZHU Shujing; ZHANG Dajie

    2006-01-01

    The chemical composition, the content and the leachability of heavy metals in municipal solid waste incineration ( MSWI) fly ash were tested and analyzed. It is shown that the leachability of Pb and Cr exceeds the leaching toxicity standard, and so the MSWI fly ash is considered as hazardous waste and must be solidifled. The effect of solidifying the MSWI fly ash by cement was studied, and it is indicated that the heavy metals can be well immobilized if the mass fraction of the fly ash is appropriate. The heavy metals were immobilized within cement hydration products through either physical fixation, substitution, deposition or adsorption mechanisms.

  6. Geological behavior of wet outflow deposition fly ash

    Institute of Scientific and Technical Information of China (English)

    周德泉; 赵明华; 刘宏利; 周毅; 严聪

    2008-01-01

    The geological behaviors of wet outflow deposition fly ash were investigated, including the feature of in-situ single and even bridge cone penetration test (CPT) curves, the change of the penetration parameters and vane strength with the increase of depth and the difference of the penetration resistance on and down the water level. Drilling, CPT and vane shear test were carried out in silty clay, fine sand, and fly ash of the ash-dam. The CPT curves of the fly ash do not show a critical depth. The cone resistance (qc) of the fly ash is smaller than that of silty clay or sand; the friction resistance is smaller than that of filling silty clay, similar to that of deposition silty clay or more than that of fine sand; the friction ratio is smaller than that of filling silty clay, or more than that of deposition silty clay or much more than that of fine sand. The specific penetration resistance (ps) is similar to that of filling silty clay, or more than that of deposition silty clay. There is a clear interface effect between the deposition fly ash and the clay. Interface effect of ps-h curve at the groundwater table is clear, and ps of the fly ash reduces significantly under the table. The vane strength of the fly ash increases as the depth increases. The deposition fly ash with wet outflow is similar to silt in the geological behavior.

  7. Sulfate resistance of high calcium fly ash concrete

    Science.gov (United States)

    Dhole, Rajaram

    Sulfate attack is one of the mechanisms which can cause deterioration of concrete. In general, Class C fly ash mixtures are reported to provide poor sulfate resistance. Fly ashes, mainly those belonging to the Class C, were tested as per the ASTM C 1012 procedure to evaluate chemical sulfate resistance. Overall the Class C fly ashes showed poor resistance in the sulfate environment. Different strategies were used in this research work to improve the sulfate resistance of Class C fly ash mixes. The study revealed that some of the strategies such as use of low W/CM (water to cementing materials by mass ratio), silica fume or ultra fine fly ash, high volumes of fly ash and, ternary or quaternary mixes with suitable supplementary cementing materials, can successfully improve the sulfate resistance of the Class C fly ash mixes. Combined sulfate attack, involving physical and chemical action, was studied using sodium sulfate and calcium sulfate solutions. The specimens were subjected to wetting-drying cycles and temperature changes. These conditions were found to accelerate the rate of degradation of concrete placed in a sodium sulfate environment. W/CM was found to be the main governing factor in providing sulfate resistance to mixes. Calcium sulfate did not reveal damage as a result of mainly physical action. Characterization of the selected fly ashes was undertaken by using SEM, XRD and the Rietveld analysis techniques, to determine the relation between the composition of fly ashes and resistance to sulfate attack. The chemical composition of glass represented on the ternary diagram was the main factor which had a significant influence on the sulfate resistance of fly ash mixtures. Mixes prepared with fly ashes containing significant amounts of vulnerable crystalline phases offered poor sulfate resistance. Comparatively, fly ash mixes containing inert crystalline phases such as quartz, mullite and hematite offered good sulfate resistance. The analysis of hydrated lime

  8. Multitechnique multielemental analysis of coal and fly ash

    International Nuclear Information System (INIS)

    The coal sample is first ashed with high temperature ashing or with RF plasma low temperature ashing. The coal ash or fly ash can be analyzed for major ash elements by fusing with lithium tetraborate in an automatic fusion device, the Claisse Fluxer. The ash samples are also dissolved in a Parr bomb in a mixture of aqua regia and HF. Subsequently, the solutions are analyzed for eight major (Al, Ca, Fe, K, Mg, Na, Si, and Ti) and 20 trace elements (As, B, Ba, Be, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, P, Pb, Sb, Se, Sr, U, V, and Zn) by inductively coupled plasma emission spectroscopy. Mercury in coal and fly ash is determined on a separate aliquot by the cold vapor atomic absorption technique. Fluorine and chlorine in the samples are determined by fusing with Na2CO3 and Eschka mixture, respectively, and then measuring the two ions in solution with specific ion electrodes. Oxygen in the samples can be determined rapidly and nondestructively by 14-MeV neutron activation analysis. These methods have been tested by analyzing several NBS coal and fly ash standards with good accuracy and reproducibility. 10 tables

  9. Environmental hazard of oil shale combustion fly ash.

    Science.gov (United States)

    Blinova, Irina; Bityukova, Liidia; Kasemets, Kaja; Ivask, Angela; Käkinen, Aleksandr; Kurvet, Imbi; Bondarenko, Olesja; Kanarbik, Liina; Sihtmäe, Mariliis; Aruoja, Villem; Schvede, Hedi; Kahru, Anne

    2012-08-30

    The combined chemical and ecotoxicological characterization of oil shale combustion fly ash was performed. Ash was sampled from the most distant point of the ash-separation systems of the Balti and Eesti Thermal Power Plants in North-Eastern Estonia. The fly ash proved potentially hazardous for tested aquatic organisms and high alkalinity of the leachates (pH>10) is apparently the key factor determining its toxicity. The leachates were not genotoxic in the Ames assay. Also, the analysis showed that despite long-term intensive oil-shale combustion accompanied by considerable fly ash emissions has not led to significant soil contamination by hazardous trace elements in North-Eastern Estonia. Comparative study of the fly ash originating from the 'new' circulating fluidized bed (CFB) combustion technology and the 'old' pulverized-fired (PF) one showed that CFB fly ash was less toxic than PF fly ash. Thus, complete transfer to the 'new' technology will reduce (i) atmospheric emission of hazardous trace elements and (ii) fly ash toxicity to aquatic organisms as compared with the 'old' technology. PMID:22717068

  10. Assessing fly ash treatment: Remediation and stabilization of heavy metals

    KAUST Repository

    Lima, A.T.

    2010-12-17

    Fly ashes from Municipal Solid Waste (MSW), straw (ST) and co-combustion of wood (CW) are here analyzed with the intent of reusing them. Two techniques are assessed, a remediation technique and a solidification/stabilization one. The removal of heavy metals from fly ashes through the electrodialytic process (EDR) has been tried out before. The goal of removing heavy metals has always been the reuse of fly ash, for instance in agricultural fields (BEK). The best removal rates are here summarized and some new results have been added. MSW fly ashes are still too hazardous after treatment to even consider application to the soil. ST ash is the only residue that gets concentrations low enough to be reused, but its fertilizing value might be questioned. An alternative reuse for the three ashes is here preliminary tested, the combination of fly ash with mortar. Fly ashes have been substituted by cement fraction or aggregate fraction. Surprisingly, better compressive strengths were obtained by replacing the aggregate fraction. CW ashes presented promising results for the substitution of aggregate in mortar and possibly in concrete. © 2010 Elsevier Ltd.

  11. Heavy metal characterization of circulating fluidized bed derived biomass ash.

    Science.gov (United States)

    Li, Lianming; Yu, Chunjiang; Bai, Jisong; Wang, Qinhui; Luo, Zhongyang

    2012-09-30

    Although the direct combustion of biomass for energy that applies circulating fluidized bed (CFB) technology is steadily expanding worldwide, only few studies have conducted an environmental assessment of biomass ash thus far. Therefore, this study aims to integrate information on the environmental effects of biomass ash. We investigated the concentration of heavy metal in biomass ash samples (bottom ash, cyclone ash, and filter ash) derived from a CFB boiler that combusted agricultural and forest residues at a biomass power plant (2×12 MW) in China. Ash samples were gathered for the digestion and leaching test. The heavy metal content in the solution and the leachate was studied via an inductively coupled plasma-mass spectrometer and a Malvern Mastersizer 2000 mercury analyzer. Measurements for the chemical composition, particle size distribution, and the surface morphology were carried out. Most of the metals in cyclone ash particles were enriched, whereas Ti and Hg were enriched in filter ash. Residence time contributed most to heavy metal enrichment. Under HJ/T 300 conditions, the heavy metals showed serious leaching characteristics. Under EN 12457-2 conditions, leaching behavior was hardly detected. PMID:22840499

  12. Biofuel Combustion Fly Ash Influence on the Properties of Concrete

    OpenAIRE

    Aurelijus Daugėla; Džigita Nagrockienė; Laurynas Zarauskas

    2016-01-01

    Cement as the binding agent in the production of concrete can be replaced with active mineral admixtures. Biofuel combustion fly ash is one of such admixtures. Materials used for the study: Portland cement CEM I 42.5 R, sand of 0/4 fraction, gravel of 4/16 fraction, biofuel fly ash, superplasticizer, water. Six compositions of concrete were designed by replacing 0%, 5%, 10%, 15% 20%, and 25% of cement with biofuel fly ash. The article analyses the effect of biofuel fly ash content on the prop...

  13. Experimental Study on Volume for Fly Ash of Building Block

    Directory of Open Access Journals (Sweden)

    Ling Wang

    2013-04-01

    Full Text Available Fly ash is a waste substance from thermal power plants, steel mills, etc. That is found in abundance in the world. It has polluted the environment, wasting the cultivated land. This study introduces an experimental research on fly ash being reused effectively, the study introduces raw materials of fly ash brick, production process and product inspection, fly ash content could be amounted to 40%~75%. High doping fly ash bricks are manufactured, which selects wet fly ash from the power plants, adding aggregate with reasonable ratio and additives with reasonable dosage and do the experimental research on manufacture products for properties, production technology and selection about technology parameter of production equipment. Index of strength grade and freezing-thawing resisting etc and the high doping fly ash brick building which we are working on can achieve the national standard on building materials industry. Based on the tests, this achievement of research has a very wide practical prospect in using fly ash, industrial waste residue, environmental protection and reducing the cost of enterprises. The efficient reuse of fly ash from coal boiler and power plants has very vital significance of protecting the environment, benefiting descendants and developing of circular economy.

  14. Wildfire Ash: Chemical Composition, Ash-Soil Interactions and Environmental Impacts

    Science.gov (United States)

    Brook, Anna; Hamzi, Seham; Wittenberg, Lea

    2015-04-01

    Of the five classical factors of soil formation, climate, parent material, topography, time, organisms, and recently recognized human activity, it is the latter factor which discretely includes fire and post-burn impact. However, it is considered that soil undergoing fire just experience a temporary removal of the top organic horizon, thus slightly modified and often labeled as 'temporarily disturbed' soil or soil 'under restoration/rehabilitation'. In fact the suggested seventh factor, post-burned produced ash, can act both dependently and independently of the other soil forming factors (Levin et al., 2013; Certini 2013). They are interdependent in cases where ash influences occur on time scales similar to 'natural' soil formation (Keesstra et ai., 2014) such as changes in vegetation. On the other hand, in post-fire areas a strong dependency is expected between soil-water retention mechanism, climate and topography. Wild-land fires exert many changes on the physical, chemical, mineralogical, biological, and morphological properties of soil that, in turn, affect the soil's hydrology and nutrient flux, modifying its ability to support vegetation and resist erosion. The ash produced by forest fires is a complex mixture composed of organic and inorganic particles characterized by vary physical-chemical and morphological properties. The importance of this study is straightforwardly related to the frequency and large-scales wildfires in Mediterranean region. In fact, wildfires are major environmental and land management concern in the world, where the number and severity of wildfires has increased during the past decades (Bodi, 2013). Certini (2013) assumed that cumulatively all of the vegetated land is burned in about 31 years annually affecting 330-430 Mha (over 3% of the Earth's surface) and wide range of land cover types worldwide including forests, peatlands, shrublands and grasslands. Whereas, the fire is identified as an important factor in soil formation, the

  15. Elemental characterization of coal, fly ash, and bottom ash using an energy dispersive X-ray fluorescence technique

    International Nuclear Information System (INIS)

    A total of 18 elements viz. Si, Al, Fe, Ca, Mg, K, Na, Sr, V, Zn, Mn, Cr, Cu, Pb, Ni, Co, As and Cd were analyzed in coal, fly ash and bottom ash samples collected across India using an EDXRF technique. Various indices such as element enrichment ratio, enrichment factor (with respect to crustal average) and mineral composition were calculated. Around 95% of mass was reconstructed using the concentration of elements in this study for fly and bottom ash. - Highlights: • Concentrations of 18 elements were determined in coal and ash samples using EDXRF. • Mineral quantification up to 95% was carried out for fly and bottom ash samples. • Enrichment ratios of elements were calculated in combustion residue with respect to coal. • Enrichment factor with respect to crustal average was estimated for ash samples

  16. Gas generation in incinerator ash; Gasbildning i aska

    Energy Technology Data Exchange (ETDEWEB)

    Arm, Maria; Lindeberg, Johanna; Rodin, Aasa; Oehrstroem, Anna; Backman, Rainer; Oehman, Marcus; Bostroem, Dan

    2006-02-15

    In recent years, explosions have occurred in certain phases of ash handling in Sweden. Investigations have revealed that hydrogen may have been present in all cases. The hydrogen is believed to be generated by chemical reactions of aluminium and other metals within the ash in the presence of water. The purpose with this study is to increase the knowledge of gas generation of incinerator ash. Thereby, guides for appropriate ash management can be introduced and the risk for further explosions prevented. The study has comprised analyses of the ash properties, such as chemical and physical composition and the pH, of ash from 14 incineration plants (mostly waste incineration plants). Different fractions of ash materials representing different parts of the process in each plant have been analysed. Furthermore, the fuel and the technical differences between the plants have been analysed. A tool for measuring the gas generation in the laboratory has been developed and the gas generation of the different ash materials at natural and increased pH was measured. Gas analyses and thermodynamic calculations have also been performed. The results showed that: bottom ash from fluidised bed boilers generated small amounts of gas at increased pH, much smaller amounts than the idle pass, cyclone and filter ash did, bottom ash from grate fired boilers generated more gas at increased pH than their cyclone ash and filter ash, with exception of the Linkoeping plant, all bio waste incineration plants generated ash with low gas generation potential, all fly ash materials with a gas generation potential of more than 10 l/kg originated from municipal waste incineration plants, filter ash that had been stored in oxygen rich environment generated significant less gas than fresh filter ash of the same origin, hardly any other gases were generated apart from hydrogen (very small amounts of acetone, furane, benzene and most likely methane were detected in some of the ash materials), there were no

  17. Effects of water availability on emerald ash borer larval performance and phloem phenolics of Manchurian and black ash.

    Science.gov (United States)

    Chakraborty, Sourav; Whitehill, Justin G A; Hill, Amy L; Opiyo, Stephen O; Cipollini, Don; Herms, Daniel A; Bonello, Pierluigi

    2014-04-01

    The invasive emerald ash borer (EAB) beetle is a significant threat to the survival of North American ash. In previous work, we identified putative biochemical and molecular markers of constitutive EAB resistance in Manchurian ash, an Asian species co-evolved with EAB. Here, we employed high-throughput high-performance liquid chromatography with photodiode array detection and mass spectrometry (HPLC-PDA-MS) to characterize the induced response of soluble phloem phenolics to EAB attack in resistant Manchurian and susceptible black ash under conditions of either normal or low water availability, and the effects of water availability on larval performance. Total larval mass per tree was lower in Manchurian than in black ash. Low water increased larval numbers and mean larval mass overall, but more so in Manchurian ash. Low water did not affect levels of phenolics in either host species, but six phenolics decreased in response to EAB. In both ashes, pinoresinol A was induced by EAB, especially in Manchurian ash. Pinoresinol A and pinoresinol B were negatively correlated with each other in both species. The higher accumulation of pinoresinol A in Manchurian ash after attack may help explain the resistance of this species to EAB, but none of the responses measured here could explain increased larval performance in trees subjected to low water availability. PMID:24125060

  18. Illinois basin coal fly ashes. 2. Equilibria relationships and qualitative modeling of ash-water reactions

    Science.gov (United States)

    Roy, W.R.; Griffin, R.A.

    1984-01-01

    Alkaline and acidic Illinois Basin coal fly ash samples were each mixed with deionized water and equilibrated for about 140 days to simulate ash ponding environments. Common to both equilibrated solutions, anhydrite solubility dominated Ca2+ activities, and Al3+ activities were in equilibrium with both matrix mullite and insoluble aluminum hydroxide phases. Aqueous silica activities were controlled by both mullite and matrix silicates. The pH of the extract of the acidic fly ash was 4.1 after 24 h but increased to a pH value of 6.4 as the H2SO4, assumed to be adsorbed to the particle surfaces, was exhausted by the dissolution of matrix iron oxides and aluminosilicates. The activities of aqueous Al3+ and iron, initially at high levels during the early stages of equilibration, decreased to below analytical detection limits as the result of the formation of insoluble Fe and Al hydroxide phases. The pH of the extract of the alkaline fly ash remained above a pH value of 10 during the entire equilibration interval as a result of the hydrolysis of matrix oxides. As with the acidic system, Al3+ activities were controlled by amorphous aluminum hydroxide phases that began to form after about 7 days of equilibration. The proposed mechanisms and their interrelations are discussed in addition to the solubility diagrams used to deduce these relationships. ?? 1984 American Chemical Society.

  19. Spectral analysis of white ash response to emerald ash borer infestations

    Science.gov (United States)

    Calandra, Laura

    The emerald ash borer (EAB) (Agrilus planipennis Fairmaire) is an invasive insect that has killed over 50 million ash trees in the US. The goal of this research was to establish a method to identify ash trees infested with EAB using remote sensing techniques at the leaf-level and tree crown level. First, a field-based study at the leaf-level used the range of spectral bands from the WorldView-2 sensor to determine if there was a significant difference between EAB-infested white ash (Fraxinus americana) and healthy leaves. Binary logistic regression models were developed using individual and combinations of wavelengths; the most successful model included 545 and 950 nm bands. The second half of this research employed imagery to identify healthy and EAB-infested trees, comparing pixel- and object-based methods by applying an unsupervised classification approach and a tree crown delineation algorithm, respectively. The pixel-based models attained the highest overall accuracies.

  20. Reactive leaching of recovery boiler fly ash

    OpenAIRE

    Frigård, Antti

    2016-01-01

    This thesis studied a new CaO leaching method for chloride and potassium removal from recovery boiler fly ash. The concept of this method is to use calcium oxide (or calcium hydroxide) as an additive in the leaching stage in order to ease the subsequent solid-liquid separation. CaO leaching has several benefits over traditional leaching process which uses sulphuric acid as an additive: CaO does not include sulphur that would affect the mills sulphur sodium balance, CaO is readily available in...

  1. ASH ENG 125 / Assignmentcloud.com

    OpenAIRE

    admin

    2015-01-01

    ENG 125 Complete Class   Check this A+ Guidelines at   http://www.assignmentcloud.com/ENG-125-ASH/ENG-125-Complete-Class-Guide     For more classes visit www.assignmentcloud.com ENG 125 Complete Class ENG 125 Week 1 DQ 1 ENG 125 Week 1 DQ 2 ENG 125 Week 1 Reading Assignment ENG 125 Week 2 DQ 1 ENG 125 Week 2 DQ 2 ENG 125 Week 2 Important Elements of Narratives Assignment ENG 125 Week 3 DQ 1 ENG 125 Week 3 DQ ...

  2. On the visibility of airborne volcanic ash and mineral dust

    Science.gov (United States)

    Weinzierl, B.; Sauer, D. N.; Minikin, A.; Reitebuch, O.; Dahlkötter, F.; Mayer, B. C.; Emde, C.; Tegen, I.; Gasteiger, J.; Petzold, A.; Veira, A.; Kueppers, U.; Schumann, U.

    2012-12-01

    After the eruption of the Eyjafjalla volcano (Iceland) in April 2010 which caused the most extensive restrictions of the airspace over Europe since the end of World War II, the aviation safety concept of avoiding "visible ash", i.e. volcanic ash that can be seen by the human eye, was recommended. However so far, no clear definition of "visible ash" and no relation between the visibility of an aerosol layer and related aerosol mass concentrations are available. The goal of our study is to assess whether it is possible from the pilot's perspective in flight to detect the presence of volcanic ash and to distinguish between volcanic ash and other aerosol layers just by sight. In our presentation, we focus the comparison with other aerosols on aerosol types impacting aviation: Besides volcanic ash, dust storms are known to be avoided by aircraft. We use in-situ and lidar data as well photographs taken onboard the DLR research aircraft Falcon during the Saharan Mineral Dust Experiments (SAMUM) in 2006 and 2008 and during the Eyjafjalla volcanic eruption in April/May 2010. We complement this analysis with numerical modelling, using idealized radiative transfer simulations with the 3D Monte Carlo radiative transfer code MYSTIC for a variety of selected viewing geometries. Both aerosol types, Saharan mineral dust and volcanic ash, show an enhanced coarse mode (> 1 μm) aerosol concentration, but volcanic ash aerosol additionally contains a significant number of Aitken mode particles (perception, etc. In addition, the optical depth along the line of sight through an aerosol layer is more important than just the (vertical) optical depth, which is measured, for example, by sun photometers or satellites. The results of our study are in particular interesting for the question on the visibility of volcanic ash. Our analyses of "visible ash" demonstrate that under clear sky conditions volcanic ash is visible already at concentrations far below what is currently considered as the

  3. Effects of chemical composition of fly ash on efficiency of metal separation in ash-melting of municipal solid waste

    International Nuclear Information System (INIS)

    Highlights: ► Separation of Pb and Zn from Fe and Cu in ash-melting of municipal solid waste. ► Molar ratio of Cl to Na and K in fly ash affected the metal-separation efficiency. ► The low molar ratio and a non-oxidative atmosphere were better for the separation. - Abstract: In the process of metal separation by ash-melting, Fe and Cu in the incineration residue remain in the melting furnace as molten metal, whereas Pb and Zn in the residue are volatilized. This study investigated the effects of the chemical composition of incineration fly ash on the metal-separation efficiency of the ash-melting process. Incineration fly ash with different chemical compositions was melted with bottom ash in a lab-scale reactor, and the efficiency with which Pb and Zn were volatilized preventing the volatilization of Fe and Cu was evaluated. In addition, the behavior of these metals was simulated by thermodynamic equilibrium calculations. Depending on the exhaust gas treatment system used in the incinerator, the relationships among Na, K, and Cl concentrations in the incineration fly ash differed, which affected the efficiency of the metal separation. The amounts of Fe and Cu volatilized decreased by the decrease in the molar ratio of Cl to Na and K in the ash, promoting metal separation. The thermodynamic simulation predicted that the chlorination volatilization of Fe and Cu was prevented by the decrease in the molar ratio, as mentioned before. By melting incineration fly ash with the low molar ratio in a non-oxidative atmosphere, most of the Pb and Zn in the ash were volatilized leaving behind Fe and Cu

  4. Failure to phytosanitize ash firewood infested with emerald ash borer in a small dry kiln using ISPM-15 standards.

    Science.gov (United States)

    Goebel, P Charles; Bumgardner, Matthew S; Herms, Daniel A; Sabula, Andrew

    2010-06-01

    Although current USDA-APHIS standards suggest that a core temperature of 71.1 degrees C (160 degrees F) for 75 min is needed to adequately sanitize emerald ash borer, Agrilus planipennis Fairmaire-infested firewood, it is unclear whether more moderate (and economical) treatment regimes will adequately eradicate emerald ash borer larvae and prepupae from ash firewood. We constructed a small dry kiln in an effort to emulate the type of technology a small- to medium-sized firewood producer might use to examine whether treatments with lower temperature and time regimes successfully eliminate emerald ash borer from both spilt and roundwood firewood. Using white ash (Fraxinus americana L.) firewood collected from a stand with a heavy infestation of emerald ash borer in Delaware, OH, we treated the firewood using the following temperature and time regime: 46 degrees C (114.8 degrees F) for 30 min, 46 degrees C (114.8 degrees F) for 60 min, 56 degrees C (132.8 degrees F) for 30 min, and 56 degrees C (132.8 degrees F) for 60 min. Temperatures were recorded for the outer 2.54-cm (1-in.) of firewood. After treatment, all firewood was placed under mesh netting and emerald ash borer were allowed to develop and emerge under natural conditions. No treatments seemed to be successful at eliminating emerald ash borer larvae and perpupae as all treatments (including two nontreated controls) experienced some emerald ash borer emergence. However, the 56 degrees C (132.8 degrees F) treatments did result in considerably less emerald ash borer emergence than the 46 degrees C (114.8 degrees F) treatments. Further investigation is needed to determine whether longer exposure to the higher temperature (56 degrees C) will successfully sanitize emerald ash borer-infested firewood. PMID:20568603

  5. PILOT SCALE STUDIES OF CLOSED-LOOP ASH SLUICING

    Science.gov (United States)

    The paper discusses pilot scale studies of closed-loop fly ash sluicing. Chemicals leached from fly ash in wet sluicing systems can cause scaling of equipment if the sluice water is recycled. A 50 gpm (190,000 cu cm/min) pilot unit was tested at two power plants to evaluate close...

  6. Mineralogy and phase transition of oil sands coke ash

    Energy Technology Data Exchange (ETDEWEB)

    Heemun Jang; Thomas H. Etsell [University of Alberta, Edmonton, AB (Canada). Department of Chemical and Materials Engineering

    2006-08-15

    Coke obtained from Syncrude and Suncor was investigated to characterize the metals and minerals by ashing it at various temperatures. Samples were collected by high temperature ashing at 100{sup o}C intervals from 400 to 1200{sup o}C. Samples were also obtained from low temperature ashing (LTA) which gives little effect on the mineral assemblage compared to HTA samples. X-ray diffraction patterns of Suncor and Syncrude coke ash were analyzed qualitatively and quantitatively to characterize the mineral phases in the sample and their thermal transition behavior. In Suncor ash, kaolinite, illite, gypsum, anhydrite, microcline, anorthite, hematite, sillimanite and quartz were dominant phases in ash from the LTA temperature up to 700{sup o}C, and mullite, cristobalite, hercynite, albite, anorthite, pseudobrookite and other iron-titanium oxides were dominant mineral phases from 700 to 1200{sup o}C. In Syncrude ash, illite, anhydrite, quartz, anorthite, microcline, sillimanite and hematite were dominant up to 700{sup o}C, and hercynite, anorthite, albite, pseudobrookite and other iron-titanium oxides were dominant up to 1200{sup o}C. The higher quantities of Ca, K and Na, and the lower quantities of V, Fe and Ni in Syncrude ash resulted in higher amorphocity and the different mineral phases. 32 refs., 3 figs., 5 tabs.

  7. Washing of granulated solidification fly ash containing radioactive contaminants

    International Nuclear Information System (INIS)

    Incineration fly ash produced from city garbage, water-and-sewage sludge, and wastes generated by radioactive decontamination activities tends to have a high concentration of radioactive materials, and radioactive cesium in fly ash has high solubility in water. In order to advance the safe processing of incineration fly ash, it is necessary to have a technology for reducing the cesium in the fly ash. Washing the fly ash with water is an effective way of reducing the amount of radioactive cesium. Then, this study developed a new method for washing fly ash after granulated solidification. Laboratory tests showed that 70% or more of the radioactive cesium was removed by washing of the granulated solidification fly ash adjusted into 1-9.5 mm diameter particles under the following conditions: flow rate (SV) ≦ 10h-1 and flow volume ≧ 10 times of fly ash volume. Demonstration tests also confirmed the effectiveness of washing and the reduction of the volume of radioactive wastes. (author)

  8. A fly ash and shale fired brick production line

    Institute of Scientific and Technical Information of China (English)

    ZhuYali

    2005-01-01

    The article describes the fly ash and shale fired brick production line with annual output of 1250 million bricks, designed by Xi'an Research and Design Institute of Wall and Roof Material, commissioned by QinDian Building Material Subcompany, and set an example for using fly ash and shale in China.

  9. Soil food web structure after wood ash application

    DEFF Research Database (Denmark)

    Mortensen, L. H.; Qin, J.; Krogh, Paul Henning;

    nutrients from the ecosystem. This can be partly mitigated by applying ash from the combustion back to the system and thus recycle the nutrients. However, besides being rich in inorganic nutrients, ash is also very alkaline and contains heavy metals. The ASHBACK project (www.ashback.dk) is a cooperation...

  10. A study of fly ash-lime granule unfired brick

    Energy Technology Data Exchange (ETDEWEB)

    P. Chindaprasirt; K. Pimraksa [Khon Kaen University (Thailand). Department of Civil Engineering

    2008-02-15

    In this paper, the properties of fly ash-lime granule unfired bricks are studied. Granules were prepared from mixtures of fly ash and lime at fly ash to hydrated lime ratios of 100:0 (Ca/Si = 0.2), 95:5 (Ca/Si = 0.35) and 90:10 (Ca/Si = 0.5). After a period of moist curing, the microstructure and mineralogy of the granules were studied. Microstructure examination reveals that new phases in the form of needle-like particles are formed at the surface of granule. The granules were used to make unfired bricks using hydrothermal treatment at temperature of 130 {+-} 5{sup o}C and pressure of 0.14 MPa. The microstructures, mineralogical compositions, mechanical properties and environmental impact of bricks were determined. The results reveal that the strengths of unfired bricks are dependent on the fineness of fly ash. The strength is higher with an increase in fly ash fineness. The strengths of the fly ash-lime granule unfired brick are excellent at 47.0-62.5 MPa. The high strength is due to the formation of new products consisting mainly of hibschite and Al-substituted 11 {angstrom} tobermorite. The main advantage of utilization of granule is the ability to increase the pozzolanic reaction of fly ash through moisture retained in the granule. In addition, the heavy elements, in particular Cd, Ni, Pb and Zn are efficiently retained in the fly ash-lime granule unfired brick.

  11. Fly ash: Perspective resource for geo-polymer materials production

    Science.gov (United States)

    Kargin, Aleksey; Baev, Vladimir; Mashkin, Nikolay; Uglyanica, Andrey

    2016-01-01

    The present paper presents the information about the chemical and mineralogical composition of the ash and slag and their amounts at the dumps of the thermoelectric plants located in the city of Kemerovo. It is known that about 85% of ash and slag from the thermoelectric plants in Russia are removed by means of the hydraulic sluicing systems and only about 15% - by the systems of pneumatic ash handling. Currently, however, the transition from the "wet" ash removal systems to the "dry" ones is outlined. This process is quite logical since the fly ash has the higher reactivity compared with the hydraulic sluicing ash and therefore it is of the great interest for recycling and use. On the other hand, the recent trend is the increased use of fly ash in the production of geo-polymers due to their availability, workability and the increased life of the final product. The analysis is carried out to check the possibility of using the fly ash from various Kemerovo thermoelectric plants as a raw material for the production of the alkali-activated binder.

  12. Ash handling system of the Elbistan power plant in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, H.

    1978-12-01

    After giving the main details concerning the brown coal present in the Afsin-Elbistan basin and the ash produced from this coal after it has been burned in the power plant the article discusses the contruction of the conveying plant by means of which the ash is removed.

  13. Fly ash in landfill top covers - a review.

    Science.gov (United States)

    Brännvall, E; Kumpiene, J

    2016-01-01

    Increase of energy recovery from municipal solid waste by incineration results in the increased amounts of incineration residues, such as fly ash, that have to be taken care of. Material properties should define whether fly ash is a waste or a viable resource to be used for various applications. Here, two areas of potential fly ash application are reviewed: the use of fly ash in a landfill top cover either as a liner material or as a soil amendment in vegetation layer. Fly ashes from incineration of three types of fuel are considered: refuse derived fuel (RDF), municipal solid waste incineration (MSWI) and biofuel. Based on the observations, RDF and MSWI fly ash is considered as suitable materials to be used in a landfill top cover liner. Whereas MSWI and biofuel fly ashes based on element availability for plant studies, could be considered suitable for the vegetation layer of the top cover. Responsible application of MSWI ashes is, however, warranted in order to avoid element accumulation in soil and elevation of background values over time. PMID:26701627

  14. Stabilization of Fly Ash Deposits through Selected Cereal Crops

    Directory of Open Access Journals (Sweden)

    Florica Morariu

    2012-10-01

    Full Text Available Fly ash, a waste product from burning coal in power plants, occupies important spaces and is a major harm forenvironment: water, air, soil and associated ecosystems. New deposits do not have available nutrients for plantgrowth. The study presents a process of stimulating growth of oats in deposits of fly ash, which eliminates listed.Phytostabilization of new deposit is fast after fertilization with sewage sludge-based compost in the presence/absence of native or modified volcanic tuff with grain species, Avena sativa L., and variety Lovrin 1. Experimentalstudies have shown the species adaptability to climatic conditions and a growth rate until the maturity correlated withtype of treatment of upper layers of fly ash deposit. Fly ash with sewage sludge compost treatment 50 t/hadetermined the growth with 75% of the amount of grains vs. the amount of grains harvested from untreated fly ash.Fly ash with sewage sludge compost mixed with modified indigenous volcanic tuff 2.5 t/ha treatment determined thegrowth with 80% vs. the amount of grains harvested from untreated fly ash. If oat straw harvested from fertilizedvariant without modified indigenous volcanic tuff increases in weight are 30% and for fertilized variant in thepresence of tuff increases in weight are 39.8% vs. quantities harvested from untreated fly ash.

  15. X-ray microanalysis of volcanic ash

    International Nuclear Information System (INIS)

    The 2010 eruption of Eyjafjallajökull volcano in Iceland demonstrated the disruptive nature of high-level volcanic ash emissions to the world's air traffic. The chemistry of volcanic material is complex and varied. Different eruptions yield both compositional and morphological variation. Equally a single eruption, such as that in Iceland will evolve over time and may potentially produce a range of volcanic products of varying composition and morphology. This variability offers the petrologist the opportunity to derive a tracer to the origins both spatially and temporally of a single particle by means of electron microbeam analysis. EPMA of volcanic ash is now an established technique for this type of analysis as used in tephrachronology. However, airborne paniculate material may, as in the case of Eyjafjallajökull, result in a particle size that is too small and too dispersed for preparation of standard EPMA mounts. Consequently SEM-EDS techniques are preferred for this type of quantitative analysis . Results of quantitative SEM-EDS analysis yield data with a larger precision error than EPMA yet sufficient to source the original eruption. Uncoated samples analyzed using variable pressure SEM yield slightly poorer results at modest pressures.

  16. Mesoporous Silica from Rice Husk Ash

    Directory of Open Access Journals (Sweden)

    S.A. Mandavgane

    2010-12-01

    Full Text Available Mesoporous silica is used as a raw material in several areas: in preparation of catalysts, in inks, as aconcrete hardening accelerator, as a component of detergents and soaps, as a refractory constituent etc.Sodium silicate is produced by reacting rice hull ash (RHA with aqueous NaOH and silica is precipitatedfrom the sodium silicate by acidification. In the present work, conversion of about 90% of silica containedin RHA into sodium silicate was achieved in an open system at temperatures of about 100 °C. The resultsshowed that silica obtained from RHA is mesoporous, has a large surface area and small particle size.Rice Husk is usually mixed with coal and this mixture is used for firing boilers. The RHA therefore, usuallycontains carbon particles. Activated carbon embedded on silica has been prepared using the carbon alreadypresent in RHA. This carbon shows good adsorption capacity. ©2010 BCREC UNDIP. All rights reserved(Received: 25th April 2010, Revised: 17th June 2010, Accepted: 24th June 2010[How to Cite: V.R. Shelke, S.S. Bhagade, S.A. Mandavgane. (2010. Mesoporous Silica from Rice Husk Ash. Bulletin of Chemical Reaction Engineering and Catalysis, 5 (2: 63-67. doi:10.9767/bcrec.5.2.793.63-67

  17. Radioactive wastes dispersed in stabilized ash cements

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, J.B.; Taylor, C.M.V.; Sivils, L.D.; Carey, J.W.

    1997-12-31

    One of the most widely-used methods for the solidification/stabilization of low-level radwaste is by incorporation into Type-I/II ordinary portland cement (OPC). Treating of OPC with supercritical fluid carbon dioxide (SCCO{sub 2}) has been shown to significantly increase the density, while simultaneously decreasing porosity. In addition, the process significantly reduces the hydrogenous content, reducing the likelihood of radiolytic decomposition reactions. This, in turn, permits increased actinide loadings with a concomitant reduction in disposable waste volume. In this article, the authors discuss the combined use of fly-ash-modified OPC and its treatment with SCCO{sub 2} to further enhance immobilization properties. They begin with a brief summary of current cement immobilization technology in order to delineate the areas of concern. Next, supercritical fluids are described, as they relate to these areas of concern. In the subsequent section, they present an outline of results on the application of SCCO{sub 2} to OPC, and its effectiveness in addressing these problem areas. Lastly, in the final section, they proffer their thoughts on why they believe, based on the OPC results, that the incorporation of fly ash into OPC, followed by supercritical fluid treatment, can produce highly efficient wasteforms.

  18. Recovery potential of German sewage sludge ash.

    Science.gov (United States)

    Krüger, Oliver; Adam, Christian

    2015-11-01

    Incineration of sewage sludge is expected to increase in the future due to growing concerns about the direct use of sludge in agriculture. Sewage sludge is the pollutant sink of wastewater treatment and thus loaded with contaminants that might pose environmental hazards. Incineration degrades organic pollutants efficiently, but since the ash is currently mostly disposed of, all valuable component like phosphorus (P) and technologically relevant metals present in the sewage sludge ash (SSA) are removed from the economic cycle entirely. We conducted a complete survey of SSA from German mono-incineration facilities and determined the theoretical recovery potential of 57 elements. German SSA contains up to 19,000 t/a P which equals approximately 13% of phosphorus applied in the German agriculture in form of phosphate rock based mineral fertilizers. Thus, SSA is an important secondary resource of P. However, its P-solubility in ammonium citrate solution, an indicator for the bioavailability, is only about 26%. Treatment of SSA is recommended to enhance P bioavailability and remove heavy metals before it is applied as fertilizer. The recovery potential for technologically relevant metals is generally low, but some of these elements might be recovered efficiently in the course of P recovery exploiting synergies. PMID:25697389

  19. Desaster, destruction, creation: from nothing to ashes

    Directory of Open Access Journals (Sweden)

    Juan Manuel Terenzi

    2016-06-01

    Full Text Available The aim of this article is to briefly discuss about certain notions as nothing, fire, ashes and the creative power that derives from them. To reach this aim, first of all we chose some philosophical concepts extracted from Heidegger's philosophy. Then, we are going to discuss the book De l’esprit: Heidegger et la question from Jacques Derrida, in which he pays attention to the use of the word Geist (mind/spirit. Derrida will investigate the use of this word and its variants in Heidegger’s philosophical work, identifying potential readings that could be hidden, uncovering a huge heideggerian theatrical scenery around this word. The philosopher of deconstruction’s reading makes important contributions and allows the reader new approaches to Heidegger’s philosophy. This two axes will aid our own reading in order to show the relation between those notions: nothing, fire, ashes, related to creative act. In this article other names will also appear, as Heraclitus, Habermas, Wittgenstein and Beckett.

  20. Phosphorus Recovery from Ashes of Sewage Sludge

    Energy Technology Data Exchange (ETDEWEB)

    Cornel, Peter; Schaum, Peter

    2003-07-01

    About 90% of the incoming phosphorus load of waste water is eliminated by waste water treatment and transferred into the sewage sludge. Considerable amounts of sewage sludge can not be used agriculturally but are incinerated. Thus the ash from mono sludge incineration plants contains significant amounts of phosphorus (up to 25% P{sub 2}O{sub 5}) and could be used as raw material in fertilizer industry. The ash is hygienically harmless and free of organic substances. The ratio of phosphorus to heavy metals is basically the same as in the sewage sludge. The first step in separating phosphorus from heavy metals is to dissolve phosphorus by extraction. The most promising way seems to be the release of phosphorus with acids or bases. With 1 m sulphuric acid it is possible to release phosphorus completely. By use of acid most of the heavy metals dissolve, too. With caustic soda as solvent, only 30-40% of the phosphorus can be dissolved but the eluate is almost free of heavy metals. The amount of phosphorus which can be released with caustic soda, depends on the applied precipitant (Al or Fe salts) for phosphorus elimination at the waste water treatment. (author)

  1. Mesoporous Silica from Rice Husk Ash

    Directory of Open Access Journals (Sweden)

    V.R. Shelke

    2011-01-01

    Full Text Available Mesoporous silica is used as a raw material in several areas: in preparation of catalysts, in inks, as a concrete hardening accelerator, as a component of detergents and soaps, as a refractory constituent etc. Sodium silicate is produced by reacting rice hull ash (RHA with aqueous NaOH and silica is precipitated from the sodium silicate by acidification. In the present work, conversion of about 90% of silica contained in RHA into sodium silicate was achieved in an open system at temperatures of about 100 °C. The results showed that silica obtained from RHA is mesoporous, has a large surface area and small particle size. Rice Husk is usually mixed with coal and this mixture is used for firing boilers. The RHA therefore, usually contains carbon particles. Activated carbon embedded on silica has been prepared using the carbon already present in RHA. This carbon shows good adsorption capacity. ©2010 BCREC UNDIP. All rights reserved(Received: 25th April 2010, Revised: 17th June 2010, Accepted: 24th June 2010[How to Cite: V.R. Shelke, S.S. Bhagade, S.A. Mandavgane. (2010. Mesoporous Silica from Rice Husk Ash. Bulletin of Chemical Reaction Engineering and Catalysis, 5 (2: 63-67. doi:10.9767/bcrec.5.2.793.63-67][DOI: http://dx.doi.org/10.9767/bcrec.5.2.793.63-67

  2. Radioactive wastes dispersed in stabilized ash cements

    International Nuclear Information System (INIS)

    One of the most widely-used methods for the solidification/stabilization of low-level radwaste is by incorporation into Type-I/II ordinary portland cement (OPC). Treating of OPC with supercritical fluid carbon dioxide (SCCO2) has been shown to significantly increase the density, while simultaneously decreasing porosity. In addition, the process significantly reduces the hydrogenous content, reducing the likelihood of radiolytic decomposition reactions. This, in turn, permits increased actinide loadings with a concomitant reduction in disposable waste volume. In this article, the authors discuss the combined use of fly-ash-modified OPC and its treatment with SCCO2 to further enhance immobilization properties. They begin with a brief summary of current cement immobilization technology in order to delineate the areas of concern. Next, supercritical fluids are described, as they relate to these areas of concern. In the subsequent section, they present an outline of results on the application of SCCO2 to OPC, and its effectiveness in addressing these problem areas. Lastly, in the final section, they proffer their thoughts on why they believe, based on the OPC results, that the incorporation of fly ash into OPC, followed by supercritical fluid treatment, can produce highly efficient wasteforms

  3. Cadmium in insects after ash fertilization

    Institute of Scientific and Technical Information of China (English)

    Martin Lodenius; Jussi Josefsson; Kari Heli(o)vaara; Esa Tulisalo; Matti Nummelin

    2009-01-01

    Ash fertilization of forests returns nutrients to forest ecosystems and has a positive effect on soil pH.but it also may elevate Cd concentrations of forest biota.Cadmium concentrations of some forest insects(Formica ants.carabids and Coleopteran larvac from decaying wood)were investigated in southern Finland where two plots were fertilized with wood ash,while two other plots represented anfertilized control plots.In ants,mean Cd concentration was 3.6±1.4 mg/kg.with nest workers having significantly higher concen-trations than workers trapped in pitfall traps.Concentrations at fertilized and unfertilized plots were similar.In carabid beetles,the average Cd concentration of Carabus glabratus was 0.44±0.36 mg/kg.with no significant difference between control plots and fertilized plots.In another carabid beetle,Pterostichus niger,mean Cd concentration was higher at fertilized plots compared to control plots.We conclude that the variation of Cd concentra-tions in the insects studied is more efficiently controlled by species-specific differences than fertilization history of the forest floor.

  4. Fire severity effects on ash extractable Total Phosphorous

    Science.gov (United States)

    Pereira, Paulo; Úbeda, Xavier; Martin, Deborah

    2010-05-01

    Phosphorous (P) is a crucial element to plant nutrition and limits vegetal production. The amounts of P in soil are lower and great part of this nutrient is absorbed or precipitated. It is well known that fire has important implications on P cycle, that can be lost throughout volatilization, evacuated with the smoke, but also more available to transport after organic matter mineralization imposed by the fire. The release of P depends on ash pH and their chemical and physical characteristics. Fire temperatures impose different severities, according to the specie affected and contact time. Fire severity is often evaluated by ash colour and this is a low-cost and excellent methodology to assess the fire effects on ecosystems. The aim of this work is study the ash properties physical and chemical properties on ash extractable Total Phosphorous (TP), collected in three wildfires, occured in Portugal, (named, (1) Quinta do Conde, (2) Quinta da Areia and (3) Casal do Sapo) composed mainly by Quercus suber and Pinus pinaster trees. The ash colour was assessed using the Munsell color chart. From all three plots we analyzed a total of 102 ash samples and we identified 5 different ash colours, ordered in an increasing order of severity, Very Dark Brown, Black, Dark Grey, Very Dark Grey and Light Grey. In order to observe significant differences between extractable TP and ash colours, we applied an ANOVA One Way test, and considered the differences significant at a p<0.05. The results showed that significant differences in the extractable TP among the different ash colours. Hence, to identify specific differences between each ash colour, we applied a post-hoc Fisher LSD test, significant at a p<0.05. The results obtained showed significant differences between the extractable TP from Very dark Brown and Black ash, produced at lower severities, in relation to Dark Grey, Very Dark Grey and Light Grey ash, generated at higher severities. The means of the first group were higher

  5. Electrical charging of ash in Icelandic volcanic plumes

    CERN Document Server

    Aplin, Karen L; Nicoll, Keri A

    2014-01-01

    The existence of volcanic lightning and alteration of the atmospheric potential gradient in the vicinity of near-vent volcanic plumes provides strong evidence for the charging of volcanic ash. More subtle electrical effects are also visible in balloon soundings of distal volcanic plumes. Near the vent, some proposed charging mechanisms are fractoemission, triboelectrification, and the so-called "dirty thunderstorm" mechanism, which is where ash and convective clouds interact electrically to enhance charging. Distant from the vent, a self-charging mechanism, probably triboelectrification, has been suggested to explain the sustained low levels of charge observed on a distal plume. Recent research by Houghton et al. (2013) linked the self-charging of volcanic ash to the properties of the particle size distribution, observing that a highly polydisperse ash distribution would charge more effectively than a monodisperse one. Natural radioactivity in some volcanic ash could also contribute to self-charging of volcan...

  6. Use of Recycled Aggregate and Fly Ash in Concrete Pavement

    Directory of Open Access Journals (Sweden)

    Myle N. James

    2011-01-01

    Full Text Available Problem statement: Recycled materials aggregate from the demolished concrete structures and fly ash from burning coal shows the possible application as structural and non structural components in concrete structures. This research aims to evaluate the feasibility of using concrete containing recycled concrete aggregate and fly ash in concrete pavement. Approach: Two water cement ratio (0.45 and 0.55 the compressive strength, modulus of electricity and flexural strength for concrete with recycled aggregate and fly ash with 0, 25% replacing cement in mass were considered. Results: The material properties of recycled aggregate concrete with fly ash indicate comparable results with that of concrete with natural aggregate and without fly ash. Conclusion/Recommendations: The recycled materials could be used in concrete pavement and it will promote the sustainability of concrete.

  7. Synthesis and characterization of fly ash-zinc oxide nanocomposite

    Directory of Open Access Journals (Sweden)

    Kunal Yeole

    2014-04-01

    Full Text Available Fly ash, generated in thermal power plants, is recognized as an environmental pollutant. Thus, measures are required to be undertaken to dispose it in an environmentally friendly method. In this paper an attempt is made to coat zinc oxide nano-particles on the surface of fly ash by a simple and environmentally friendly facile chemical method, at room temperature. Zinc oxide may serve as effective corrosion inhibitor by providing sacrificial protection. Concentration of fly ash was varied as 5, 10 and 15 (w/w % of zinc oxide. It was found that crystallinity increased, whereas particle size, specific gravity and oil absorption value decreased with increased concentration of fly ash in zinc oxide, which is attributed to the uniform distribution of zinc oxide on the surface of fly ash. These nanocomposites can potentially be used in commercial applications as additive for anticorrosion coatings.

  8. Leaching Behavior of Fly Ashes from Power Plants

    Institute of Scientific and Technical Information of China (English)

    LIU Guijian; GAO Lianfen; ZHENG Liugen; ZHANG Haoyuan; PENG Zicheng

    2004-01-01

    The Yanzhou mine district, located in southwestern Shandong Province, is about 1300 km2 with more than 8×109 tons of proved coal reserves and there are 10 big power plants in this area. A large amount of coal ashes, which are regarded as waste materials, have been stockpiled in the area and have influenced the environment of the mine district. In this paper, analysis of fly ash samples from three power plants is carried out, the enrichment and concentration of trace elements, Pb, Zn, Cu and As, in coal ashes are analyzed, and petrological and mineralogical characteristics and chemical compositions of coal ashes are studied. The aim of this work is to provide basic scientific data for utilization of ashes and reduction of environmental pollutions.

  9. Optical properties of fly ash. Volume 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Self, S.A.

    1994-12-01

    Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executive summary of the whole program followed by the dissertation of Ghosal. Volume 1 contains the dissertation of Ghosal which covers the characterization of fly ash and the measurements of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.

  10. Leaching of nutrient salts from fly ash from biomass combustion

    DEFF Research Database (Denmark)

    Thomsen, Kaj; Vu, Duc Thuong; Stenby, Mette;

    2005-01-01

    Methods to selectively leach nutrient salts from fly ash, while leaving cadmium un-dissolved were studied. Temperature, pH, water to fly ash ratio are all expected to influence the kinetics and the equilibrium boundaries for this process. Three different leaching methods were investigated. The...... moving bed process with agitation/centrifugation. It was found that a satisfactory leaching of the nutrient salts could be achieved with the third method using only two or three stages, depending on the water to fly ash ratio. It is an advantage to perform the process at temperatures above 50°C as the...... first method was a counter current moving bed process in four stages. The ash was kept in filter bags and leached with water that was introduced into the bags at 40-50°C. In the second method, fly ash and water was brought into contact in a partially fluidized bed. The third method was a counter current...

  11. Dioxin contents in fly ashes of MSW incineration in Taiwan.

    Science.gov (United States)

    Chang, M B; Chung, Y T

    1998-04-01

    Fly ashes from three municipal solid waste (MSW) incinerators in Taiwan were collected and segregated into different fractions for determining the physical and chemical properties and dioxin contents. Analysis of ashes with each fraction indicated that fine particles had higher dioxin contents than large particles. Dioxin homologue components of ashes generated from large-scale mass burn MSW incinerator were less toxic than that from small-scale batch incinerators, and contained less non-2,3,7,8 PCDD/Fs. Correlation analysis did not reveal a consistent trend between dioxins content and ashes' physical properties, while strong positive correlation was found between dioxins content and chloride content. Positive correlation between dioxin content and heavy metals content such as copper and zinc in the fly ash was also established. PMID:9532726

  12. Synthesis and characterization of zeolites prepared from industrial fly ash

    OpenAIRE

    Franus, Wojciech; Wdowin, Magdalena; Franus, Małgorzata

    2014-01-01

    In this paper, we present the possibility of using fly ash to produce synthetic zeolites. The synthesis class F fly ash from the Stalowa Wola SA heat and power plant was subjected to 24 h hydrothermal reaction with sodium hydroxide. Depending on the reaction conditions, three types of synthetic zeolites were formed: Na-X (20 g fly ash, 0.5 dm3 of 3 mol · dm−3 NaOH, 75 °C), Na-P1 (20 g fly ash, 0.5 dm3 of 3 mol · dm−3 NaOH, 95 °C), and sodalite (20 g fly ash, 0.8 dm3 of 5 mol · dm−3 NaOH + 0.4...

  13. Electrodialytic removal of cadmium from straw combustion fly ash

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Ottosen, Lisbeth M.; Villumsen, Arne

    2004-01-01

    Fly ash from straw combustion contains valuable nutrients when returned to agricultural soils. In many instances, however, this fly ash may contain heavy metals, such as cadmium, at levels which often exceed the limits given by the Danish legislation. Thus before utilizing the nutrients, cadmium...... must be removed from these ashes. The use of an electrodialytic remediation method to remove cadmium from fly ash arising from straw combustion and containing 11.2 mg Cd kg$+-1$/ DM (dry matter) was accessed. After 36 days of remediation at a constant current density of 5.6 mA cm$+-2$/ more than 97% of...... the cadmium had been removed from around 150 g ash on a dry basis. $CPY 2004 Society of Chemical Industry....

  14. Ash Deposition Trials at Three Power Stations in Denmark

    DEFF Research Database (Denmark)

    Laursen, Karin; Frandsen, Flemming; Larsen, Ole Hede

    1998-01-01

    Six full-scale trials were conducted at three power stations in Denmark: Ensted, Funen, and Vendsyssel power stations. During these trials, pulverized coal, bottom ash, fly ash, and deposits from cooled probes were sampled and analyzed with various techniques. On the basis of SEM analyses, the...... deposits can be grouped into five textural types, which all possess distinct textural and chemical characteristics. Likewise, the deposition mechanisms for these five types are characteristic and they may be used for constructing a model for the buildup and maturation of an ash deposit. The deposits...... collected on the probes were thin (maximum 2 mm after 9 h) and the influence of operational parameters and probe temperatures on the magnitude of the deposits were minor. The probe temperatures had no influence on the composition of the ash deposits for coals with low ash deposition propensities, whereas...

  15. State Waste Discharge Permit application: 200-E Powerhouse Ash Pit

    Energy Technology Data Exchange (ETDEWEB)

    Atencio, B.P.

    1994-06-01

    As part of the Hanford Federal Facility Agreement and Consent Order negotiations, the US Department and Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. This document constitutes the State Waste Discharge Permit application for the 200-E Powerhouse Ash Pit. The 200-E Powerhouse Ash Waste Water discharges to the 200-E Powerhouse Ash Pit via dedicated pipelines. The 200-E Ash Waste Water is the only discharge to the 200-E Powerhouse Ash Pit. The 200-E Powerhouse is a steam generation facility consisting of a coal-handling and preparation section and boilers.

  16. Improved mechanical properties of concretes by fly ash grading

    Energy Technology Data Exchange (ETDEWEB)

    Shu, L.; Lu, Z.; Yan, Y.; Qiao, H.; An, J. [Southeast University of Science and Technology, Mianyang (China)

    2008-08-15

    The influence of the dosage of class II fly ash of different fineness on the mechanical properties of concrete was researched. The result shows that activity in the early phase elevated as the amount of submicron particles increased by grinding the fly ash. Over-grinding resulted in slump decreasing sharply. SEM analysis shows that hydrated products of glass micron-beads in class II fly ash were not found. The synergistic effect between fly ash of different fineness was researched by the Andersen equation. The micro-aggregate effect is the most important factor affecting the strength of concrete. A fourth-order mixture with a 50% replacement of cement by fly ash was studied under conditions of practical production and application. A regression equation which uses slump and compressive strength at 28 d as a function was deduced.

  17. Analysis list: ash-2 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ash-2 Adult,Embryo + ce10 http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/as...h-2.1.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/ash-2.5.tsv http://dbarchive.biosciencedbc....jp/kyushu-u/ce10/target/ash-2.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/colo/ash-2.Adult.tsv,http://dbarchive.bioscience...dbc.jp/kyushu-u/ce10/colo/ash-2.Embryo.tsv http://dbarchive.bioscience...dbc.jp/kyushu-u/ce10/colo/Adult.gml,http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/colo/Embryo.gml ...

  18. Fly ash used to create alternative building product

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, T.

    1995-04-01

    Autoclaved Cellular Concrete (ACC), a new, concrete-like block containing 70 percent fly ash, is proving to be a superior alternative to concrete, wood and paper products. The ACC block, currently being promoted by the Electric Power Research Institute (EPRI), could reduce both the overall cost of generating electricity from coal and the need for landfill space. The typical fly ash concrete mixture is 4 to 5 percent fly ash. {open_quotes}It doesn`t take a brain surgeon to see that these blocks are a much better outlet for fly ash than the current concrete mixture,{close_quotes} said Dean Golden, EPRI`s project manager. Golden estimates that a typical coal-fired plant can save an average of $10 per ton in landfill costs alone by converting its principal by-product to these blocks. Besides fly ash, the blocks also contain water, cement, lime and aluminum powder.

  19. COAL-FIRED UTILITY BOILERS: SOLVING ASH DEPOSITION PROBLEMS; TOPICAL

    International Nuclear Information System (INIS)

    The accumulation of slagging and fouling ash deposits in utility boilers has been a source of aggravation for coal-fired boiler operators for over a century. Many new developments in analytical, modeling, and combustion testing methods in the past 20 years have made it possible to identify root causes of ash deposition. A concise and comprehensive guidelines document has been assembled for solving ash deposition as related to coal-fired utility boilers. While this report accurately captures the current state of knowledge in ash deposition, note that substantial research and development is under way to more completely understand and mitigate slagging and fouling. Thus, while comprehensive, this document carries the title ''interim,'' with the idea that future work will provide additional insight. Primary target audiences include utility operators and engineers who face plant inefficiencies and significant operational and maintenance costs that are associated with ash deposition problems. Pulverized and cyclone-fired coal boilers are addressed specifically, although many of the diagnostics and solutions apply to other boiler types. Logic diagrams, ash deposit types, and boiler symptoms of ash deposition are used to aid the user in identifying an ash deposition problem, diagnosing and verifying root causes, determining remedial measures to alleviate or eliminate the problem, and then monitoring the situation to verify that the problem has been solved. In addition to a step-by-step method for identifying and remediating ash deposition problems, this guideline document (Appendix A) provides descriptions of analytical techniques for diagnostic testing and gives extensive fundamental and practical literature references and addresses of organizations that can provide help in alleviating ash deposition problems

  20. Assessment of the impact of radionuclides in coal ash

    International Nuclear Information System (INIS)

    An assessment of the potential environmental and health impacts of radionuclides in the coal fuel cycle is being conducted at Mound. This paper describes studies evaluating the potential for migration of radionuclides from ash disposal sites. Studies at a power plant burning western-US coal dealt with an assessment of potential radiation doses from coal ash ponds and leachate discharges of radionuclides from the ponds. Emanation of 222Rn from the ash is relatively low. The emanation of 222Rn from the ash pond (226Ra at 4.5pCi.g-1) is predicted to be about six times less than from soil (226Ra at 1pCi.g-1). Ash with 226Ra at 25pCi.g-1 would approximate emanation of 222Rn from soil. At 1000m from the centre of the ash pond area, 222Rn from the ash pond is predicted to be 1000 to 6000 times less than background (0.1 to 0.5pCi.ltr-1). Pathways exist for transport of radionuclides leached from ash into the aquifer beneath the holding ponds, but concentrations of radionuclides in water leaving the ponds are lower than concentrations in groundwater which is upgradient of the ponds. Leachability of the ash is quite low, on the order of 0.002% in one month, and flow of ash-sluicing water (3% of the volume of the ponds each day) has actually diluted normal background concentrations of radionuclides in the aquifer between the ponds and the adjacent river. (author)

  1. Toxicity mitigation and solidification of municipal solid waste incinerator fly ash using alkaline activated coal ash

    International Nuclear Information System (INIS)

    Highlights: ► Incinerator fly ash (IFA) is added to an alkali activated coal fly ash (CFA) matrix. ► Means of stabilizing the incinerator ash for use in construction applications. ► Concrete made from IFA, CFA and IFA-CFA mixes was chemically characterized. ► Environmentally friendly solution to IFA disposal by reducing its toxicity levels. - Abstract: Municipal solid waste (MSW) incineration is a common and effective practice to reduce the volume of solid waste in urban areas. However, the byproduct of this process is a fly ash (IFA), which contains large quantities of toxic contaminants. The purpose of this research study was to analyze the chemical, physical and mechanical behaviors resulting from the gradual introduction of IFA to an alkaline activated coal fly ash (CFA) matrix, as a mean of stabilizing the incinerator ash for use in industrial construction applications, where human exposure potential is limited. IFA and CFA were analyzed via X-ray fluorescence (XRF), X-ray diffraction (XRD) and Inductive coupled plasma (ICP) to obtain a full chemical analysis of the samples, its crystallographic characteristics and a detailed count of the eight heavy metals contemplated in US Title 40 of the Code of Federal Regulations (40 CFR). The particle size distribution of IFA and CFA was also recorded. EPA’s Toxicity Characteristic Leaching Procedure (TCLP) was followed to monitor the leachability of the contaminants before and after the activation. Also images obtained via Scanning Electron Microscopy (SEM), before and after the activation, are presented. Concrete made from IFA, CFA and IFA-CFA mixes was subjected to a full mechanical characterization; tests include compressive strength, flexural strength, elastic modulus, Poisson’s ratio and setting time. The leachable heavy metal contents (except for Se) were below the maximum allowable limits and in many cases even below the reporting limit. The leachable Chromium was reduced from 0.153 down to 0.0045 mg

  2. Feasibility study on solidification of municipal solid waste incinerator fly ash with circulating fluidized bed combustion coal fly ash.

    Science.gov (United States)

    Liu, Wenshi; Hou, Haobo; Zhang, Chuhao; Zhang, Dajie

    2009-05-01

    The objective of this study was to assess the feasibility of solidification of municipal solid waste incinerator (MSWI) fly ash with circulation fluidized bed combustion (CFBC) fly ash, which is unsuitable as a cement replacement due to its high amounts of carbon, lime and anhydrite. The solidification process was conducted on samples prepared from MSWI fly ash, binders (cement clinkers and CFBC fly ash were mixed at two replacement ratios) and water (water/solid weight ratio = 0.4), among which the MSWI fly ash replaced each binder at the ratio of 0, 20, 40, 60 and 80% by dry weight. The samples were subjected to compressive strength tests and Toxicity Characteristic Leaching Procedure and the results showed that all solidified MSWI fly ash can meet the landfill standard imposed by US EPA after 28 days of curing. Micro-analysis (X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectrophotometry) revealed that the main hydrate products were C-S-H gel and ettringite, which have a positive effect on heavy metals retention. Therefore, this method provides a possibility to achieve a cheap and effective solution for MSWI fly ash management and use for CFBC fly ash. PMID:19423575

  3. Ash and heavy metals in fluidized bed-combustion; Tuhka ja raskasmetallit puuperaeisen jaetteen kerrosleijupoltossa

    Energy Technology Data Exchange (ETDEWEB)

    Kaessi, T.; Aittoniemi, P. [IVO International, Vantaa (Finland)

    1996-12-01

    Combustion ashes and submicron fly ash particles were characterized in two industrial boilers (bubbling vs. circulating fluidized bed) burning paper mill deinking sludge and bark or wood as support fuel. Bulk samples from fly ash, circulating ash and bottom ash were analyzed. Fine particles in fly ash were monitored and sampled for microscopic studies. The mass size distribution of fly ash was measured and the chemical composition according to particle size was analyzed. The results showed that ash consists of large and friable clusters formed by sintering of small mineral particles originating from paper fillers. Very few ash particles were fused and they were found only among the smallest particles. No agglomerates of fused particles were found. If the residence time in furnace is long enough sintering may proceed further and ash structure grows more dense. No indication of ash vaporization was detected. These results were similar for bubbling and circulating fluidized bed boilers. (author)

  4. Wildfire Ash: Chemical Composition, Ash-Soil Interactions and Environmental Impacts

    Science.gov (United States)

    Brook, Anna; Hamzi, Seham; Wittenberg, Lea

    2015-04-01

    Of the five classical factors of soil formation, climate, parent material, topography, time, organisms, and recently recognized human activity, it is the latter factor which discretely includes fire and post-burn impact. However, it is considered that soil undergoing fire just experience a temporary removal of the top organic horizon, thus slightly modified and often labeled as 'temporarily disturbed' soil or soil 'under restoration/rehabilitation'. In fact the suggested seventh factor, post-burned produced ash, can act both dependently and independently of the other soil forming factors (Levin et al., 2013; Certini 2013). They are interdependent in cases where ash influences occur on time scales similar to 'natural' soil formation (Keesstra et ai., 2014) such as changes in vegetation. On the other hand, in post-fire areas a strong dependency is expected between soil-water retention mechanism, climate and topography. Wild-land fires exert many changes on the physical, chemical, mineralogical, biological, and morphological properties of soil that, in turn, affect the soil's hydrology and nutrient flux, modifying its ability to support vegetation and resist erosion. The ash produced by forest fires is a complex mixture composed of organic and inorganic particles characterized by vary physical-chemical and morphological properties. The importance of this study is straightforwardly related to the frequency and large-scales wildfires in Mediterranean region. In fact, wildfires are major environmental and land management concern in the world, where the number and severity of wildfires has increased during the past decades (Bodi, 2013). Certini (2013) assumed that cumulatively all of the vegetated land is burned in about 31 years annually affecting 330-430 Mha (over 3% of the Earth's surface) and wide range of land cover types worldwide including forests, peatlands, shrublands and grasslands. Whereas, the fire is identified as an important factor in soil formation, the

  5. Evaluation of Vitrification Processing Step for Rocky Flats Incinerator Ash

    International Nuclear Information System (INIS)

    In 1997, Pacific Northwest National Laboratory (PNNL) staff developed a processing option for incinerator ash at the Rocky Flats Environmental Technology Sites (RFETS). This work was performed with support from Los Alamos National Laboratory (LANL) and Safe Sites of Colorado (SSOC). A description of the remediation needs for the RFETS incinerator ash is provided in a report summarizing the recommended processing option for treatment of the ash (Lucy et al. 1998). The recommended process flowsheet involves a calcination pretreatment step to remove carbonaceous material followed by a vitrification processing step for a mixture of glass tit and calcined incinerator ash. Using the calcination pretreatment step to remove carbonaceous material reduced process upsets for the vitrification step, allowed for increased waste loading in the final product, and improved the quality of the final product. Figure 1.1 illustrates the flow sheet for the recommended processing option for treatment of RFETS incinerator ash. In 1998, work at PNNL further developed the recommended flow sheet through a series of studies to better define the vitrification operating parameters and to address secondary processing issues (such as characterizing the offgas species from the calcination process). Because a prototypical rotary calciner was not available for use, studies to evaluate the offgas from the calcination process were performed using a benchtop rotary calciner and laboratory-scale equipment (Lucy et al. 1998). This report focuses on the vitrification process step after ash has been calcined. Testing with full-scale containers was performed using ash surrogates and a muffle furnace similar to that planned for use at RFETS. Small-scale testing was performed using plutonium-bearing incinerator ash to verify performance of the waste form. Ash was not obtained from RFETS because of transportation requirements to calcine the incinerator ash prior to shipment of the material. Because part of

  6. Synthesis and characterization of geopolymer from bottom ash and rice husk ash

    Science.gov (United States)

    Anggarini, Ufafa; Sukmana, Ndaru C.

    2016-02-01

    All Geopolymer (GP) has been synthesized from bottom ash and rice husk ash. This research aims to determine the effect of Si/Al ratio on geopolymer synthesis. Geopolymer was synthesized with various Si/Al ratio of 2, 3 and 4. The characterization result using XRD and SEM indicated that by using a different ratio of Si/A, it will produce geopolymer with varied structure and morphology. Diffractogram result shows that polymerization has been done for all samples (GP2, GP3, Gp4) with the presence of hump peak at 2θ = 27-35°. In GP4, no peak at 2θ = 18° indicating sodalite phase forming. Besides that, the morphology of geopolymer with a varied ratio of Si/Al shows that higher ratio will produce geopolymer with higher particle size. The highest compressive strength of geopolymer was obtained at a ratio of Si/Al = 4, with a maximum load of 12866 kgf.

  7. Orimulsion fly ash in clay bricks. Part 3: chemical stability of ash-bearing products

    OpenAIRE

    Dondi, M.; Guarini, G.; Raimondo, M.; Ruffini, A.

    2002-01-01

    The chemical stability of clay bricks containing Orimulsion ash (up to 6 wt.%) was assessed with a laboratory simulation of the brickmaking process. The development of efflorescence, the amount of water soluble salts and their elution, the fraction of S, V, Ni, Mg, Ca, Na and K immobilized in the ceramic matrix, and the amount of volatile elements potentially released during firing were determined by ICP-OES, XRPD, TGA, SEM and EMP analyses. The stabilizing mechanism acts through the capture ...

  8. Zeolite from fly ash: synthesis and characterization

    Indian Academy of Sciences (India)

    Keka Ojha; Narayan C Pradhan; Amar Nath Samanta

    2004-12-01

    Coal fly ash was used to synthesize X-type zeolite by alkali fusion followed by hydrothermal treatment. The synthesized zeolite was characterized using various techniques such as X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, BET method for surface area measurement etc. The synthesis conditions were optimized to obtain highly crystalline zeolite with maximum BET surface area. The maximum surface area of the product was found to be 383 m2/g with high purity. The crystallinity of the prepared zeolite was found to change with fusion temperature and a maximum value was obtained at 823 K. The cost of synthesized zeolite was estimated to be almost one-fifth of that of commercial 13X zeolite available in the market.

  9. Scrap tire ashes in portland cement production

    Directory of Open Access Journals (Sweden)

    Mónica Adriana Trezza

    2009-01-01

    Full Text Available Scrap tires are not considered harmful waste, but their stocking and disposal are a potential health and environmental risk. Properly controlled calcinations at high temperatures make tire combustion an interesting alternative due to its high calorific power, comparable to that of fuel-oil. Consequently, using them as an alternative combustible material in cement kilns makes it possible to give it a valuable use. However, it remains to be assured whether the impurities added to the clinker through these fuels do not affect its structure or properties.This paper shows the studies carried out on different clinkers under laboratory conditions with different levels of addition of scrap tire ashes, added by partially replacing traditional fuel in cement kilns.

  10. Concrete with Highly Active Rice Husk Ash

    Institute of Scientific and Technical Information of China (English)

    FENG Qing-ge; LIN Qing-yu; YU Qi-jun; ZHAO San-ying; YANG Lu-feng; Shuichi Sugita

    2004-01-01

    The overall aim was to investigate the effect of highly active rice husk ash (RHA) produced by an industrial furnace on some properties of concrete. The strength, pore volume and pore distribution of concrete and the Ca(OH)2 content in concrete were investigated by JIS A 1108 (Method of test for compressive strength of concrete), a mercury instrument porosimeter, and the thermogravimetric analysis, respectively. The results show that,with RHA replacement of cement,the compressive strength of concrete is increased evidently;the average pore radius of concrete is greatly decreased, especially the portion of the pores greater than 20nm in radius is decreased while the amount of smaller pores is increased, and the more the RHA replacement, the less the amount of Ca(OH)2 in concrete. The latter two results are the main reasons for the strength enhancement of concrete.

  11. Properties of Concrete using Tanjung Bin Power Plant Coal Bottom Ash and Fly Ash

    Directory of Open Access Journals (Sweden)

    Abdulhameed Umar Abubakar

    2012-12-01

    Full Text Available Coal combustion by-products (CCPs have been around since man understood that burning coal generates electricity, and its utilization in concrete production for nearly a century. The concept of sustainable development only reawaken our consciousness to the huge amount of CCPs around us and the need for proper reutilization than the current method of disposal which has  severe consequences both to man and the environment. This paper presents the result of utilization of waste from thermal power plants to improve some engineering properties of concrete. Coal bottom ash (CBA and fly ash were utilized in partial replacement for fine aggregates and cement respectively. The results of compressive strength at 7, 28, 56 & 90 days curing are presented because of the pozzolanic reaction. Other properties investigated include physical properties, fresh concrete properties and density. The results showed that for a grade 35 concrete with a combination of CBA and fly ash can produce 28 day strength above 30 MPa.

  12. Phenolic acids as bioindicators of fly ash deposit revegetation

    Energy Technology Data Exchange (ETDEWEB)

    L. Djurdjevic; M. Mitrovic; P. Pavlovic; G. Gajic; O. Kostic [Institute for Biological Research ' Sinisa Stankovic,' Belgrade (Serbia and Montenegro). Department of Ecology

    2006-05-15

    The floristic composition, the abundance, and the cover of pioneer plant species of spontaneously formed plant communities and the content of total phenolics and phenolic acids, as humus constituents, of an ash deposit after 7 years of recultivation were studied. The restoration of both the soil and the vegetation on the ash deposits of the 'Nikola Tesla-A' thermoelectric power plant in Obrenovac (Serbia) is an extremely slow process. Unfavorable physical and chemical characteristics, the toxicity of fly ash, and extreme microclimatic conditions prevented the development of compact plant cover. The abundance and cover of plants increased from the central part of the deposit towards its edges. Festuca rubra L., Crepis setosa Hall., Erigeron canadensis L., Cirsium arvense (L.) Scop., Calamagrostis epigeios (L.) Roth., and Tamarix gallica L. were the most abundant species, thus giving the highest cover. Humus generated during the decomposition process of plant remains represents a completely new product absent in the ash as the starting material. The amount of total phenolics and phenolic acids in fly ash increased from the center of the deposit towards its edges in correlation with the increase in plant abundance and cover. The presence of phenolic acids indicates the ongoing process of humus formation in the ash, in which the most abundant pioneer plants of spontaneously formed plant communities play the main role. Phenolic compounds can serve as reliable bioindicators in an assessment of the success of the recultivation process of thermoelectric power plants' ash deposits.

  13. Characterization and possible uses of ashes from wastewater treatment plants

    International Nuclear Information System (INIS)

    This work, on the ashes from the wastewater treatment plant of Galindo (Vizcaya, Spain), has been outlined with the purpose of finding their physico-chemical properties and suggesting possible applications. Ashes contain important quantities of iron, calcium, silica, alumina and phosphates. X-Ray diffraction data make it possible to estimate the mineralogical compositions of the original ashes and also, after thermal treatment at 1200 and 1300 deg. C, the main reactions occurring in thermal treatment. Particle size analysis makes it possible to classify ashes as a very fine powdered material. The thermal treatment leads to a densification of the material and provokes losses of weight mainly due to the elimination of water, carbon dioxide and sulphur trioxide. Application tests show that ashes are not suitable for landfill and similar applications, because of their plastic properties. Testing for pozzolanic character, after the ashes had been heated at 1200 deg. C, did not lead to a strong material probably due to low contents in silica and alumina or to requiring a higher heating temperature. Thermal treatment leads to densification of the material with a considerable increase of compressive strength of the probes. The use of additives (clays and powdered glass) to improve ceramic properties of ashes will be the aim of a future work

  14. Stabilization of Expansive Soil by Lime and Fly Ash

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ji-ru; CAO Xing

    2002-01-01

    An experimental program was undertaken to study the individual and admixed effects of lime and fly ash on the geotechnical characteristics of expansive soil. Lime and fly ash were added to the expansive soil at 4% -6% and 40% - 50% by dry weight of soil, respectively. Testing specimens were determined and examined in chemical composition, grain size distribution, consistency limits, compaction, CBR ,free swell and swell capacity. The effect of lime and fly ash addition on reducing the swelling potential of an expansive soil is presented.It is revealed that a change of expansive soil texture takes place when lime and fly ash are mixed with expansive soil. Plastic limit increases by mixing lime and liquid limit decreases by mixing fly ash, which decreases plasticity index. As the amount of lime and fly ash is increased, there are an apparent reduction in maximum dry density,free swell and swelling capacity under 50 kPa pressure, and a corresponding increase in the percentage of coarse particles, optimum moisture content and CBR value. Based on the results, it can be concluded that the expansive soil can be successfully stabilized by lime and fly ash.

  15. γ ray on-line ash monitor for coal

    International Nuclear Information System (INIS)

    For instrumented and automated coal dressing and briquetting processes to be operated under the optimum conditions, it is necessary to continuously measure the content of inconbustibles in coal (ash content) and to feed back the data to each process control system. To this end, the authors developed an on-line coal ash monitor of a two-radiation-source transmission type using the radioactive isotopes of 241Am and 137Cs. The structure and functions of the automatic ash content analyzing system is outlined in this report. The ash content A can be calculated from the measurement P, the ratio of the mass absorption coefficients of coal for 241Am and 137Cs, regardless of the thickness of the coal layer on the basis of the linear relationship between A and M. The ash content monitoring system consists of three sections, i.e., for source-detector, measurement and data processing. The signals from the detectors are sent to the counting unit in the measurement section after being amplified. The counting data are then fed to the processing unit, where the ash content is calculated. The counting data and the calculated ash content are shown in the display unit of the computer and the indicator of the measuring apparatus, outputted by the printer and indicated in analog meters. (Nogami, K.)

  16. Carbonatation Influence on Fly Ash and Portland Cement Mortars

    Directory of Open Access Journals (Sweden)

    P.L. Valdez–Tamez

    2009-01-01

    Full Text Available The influence of carbonation on mortars containing 25% of fly ash instead of the cementitious materials was studied. Mortar cylinder specimens were fabricated for 4 different W/C ratios: 0.35, 0.45, 0.55 and 0.65. Mortars with and without fly ash were subjected to an accelerated carbonation process. Volumetric weight, water absorption, compressive strength, water permeability, pH and mercury intrusion porosimetry of the mortar specimens were determined. Due to the fly ash pozzolanic potential, for all W/C ratios, results of the compressive strength tests at 28 days of the mortars with and without fly ash were similar. Mortars with fly ash presented similar water permeability as mortars without fly ash. PH results showed that alkalinity reduction is lower in mortars with fly ash compared to those containing cement only. In all the mortars, the porosimetric analysis indicated that porosity is reduced due to carbonation. Further more, it is showed the predominance of the macro and mesopores.

  17. Coal fly ash: a retrospective and future look

    Energy Technology Data Exchange (ETDEWEB)

    Manz, O.E. [University of North Dakota, Grand Forks, ND (United States). Civil Engineering Dept.

    1998-07-01

    In 1996, approximately 7.28 million metric tons (8.02 million short tons) of coal fly ash was used in the United States in cement and concrete products. The amount of fly ash in typical structural concrete applications ranges from 15 to 35% by weight, with amounts up to 70% for mass concrete in dams, walls, and girders and for roller-compacted concrete pavements and parking areas. Various concrete mixtures are produced with coal fly ash, including regular weight and lightweight concretes, high-strength concrete, low-slump paving concrete, and architectural concrete. With the principal exception of high-strength concrete, these mixtures are routinely air-entrained for added workability and for resistance to freezing and thawing. A state-of-the-art report on the use of coal fly ash in concrete has been prepared by the American Concrete Institute (ACI): Use of Fly Ash in Concrete, ACI 232.2R-96. Fly ash for use as a mineral admixture in concrete is covered in a specification published by the American Society for Testing and Materials (ASTM): Mineral Admixture in Portland Cement Concrete, ASTM C618. Revisions to the Canadian Standard CSA A 23.5 are also discussed, together with barriers to the use of fly ash. 2 photos.

  18. Mutagenicity and genotoxicity of coal fly ash water leachate

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, R.; Mukherjee, A. [University of Calcutta, Calcutta (India). Dept. of Botany

    2009-03-15

    Fly ash is a by-product of coal-fired electricity generation plants. The prevalent practice of disposal is as slurry of ash and water to storage or ash ponds located near power stations. This has lain to waste thousands of hectares of land all over the world. Since leaching is often the cause of off-site contamination and pathway of introduction into the human environment, a study on the genotoxic effects of fly ash leachate is essential. Leachate prepared from the fly ash sample was analyzed for metal content, and tested for mutagenicity and genotoxicity. Analyses of metals show predominance of the metals - sodium, silicon, potassium, calcium, magnesium, iron, manganese, zinc, and sulphate. The Ames Salmonella mutagenicity assay, a short-term bacterial reverse mutation assay, was conducted on two-tester strains of Salmonella typhimurium strains TA97a and TA102. For genotoxicity, the alkaline version of comet assay on fly ash leachate was carried in vitro on human blood cells and in vivo on Nicotiana plants. The leachate was directly mutagenic and induced significantconcentration-dependent increases in DNA damage in whole blood cells, lymphocytes, and in Nicotiana plants. The comet parameters show increases in tail DNA percentage (%), tail length (mu m), and olive tail moment (arbitrary units). Our results indicate that leachate from fly ash dumpsites has the genotoxic potential and may lead to adverse effects on vegetation and on the health of exposed human populations.

  19. Distribution of arsenic and mercury in lime spray dryer ash

    Energy Technology Data Exchange (ETDEWEB)

    Panuwat Taerakul; Ping Sun; Danold W. Golightly; Harold W. Walker; Linda K. Weavers [Ohio State University, Columbus, OH (United States). Department of Civil and Environmental Engineering and Geodetic Science

    2006-08-15

    The partitioning of As and Hg in various components of lime spray dryer (LSD) ash samples from a coal-fired boiler was characterized to better understand the form and fate of these elements in flue gas desulfurization byproducts. LSD ash samples, collected from the McCracken Power Plant on the Ohio State University campus, were separated by a 140-mesh (106 {mu}m) sieve into two fractions: a fly-ash-/unburned-carbon-enriched fraction (> 106 {mu}m) and a calcium-enriched fraction (< 106 {mu}m). Unburned carbon and fly ash in the material > 106 {mu}m were subsequently separated by density using a lithium heteropolytungstate solution. The concentrations of As and Hg were significant in all fractions. The level of As was consistently greater in the calcium-enriched fraction, while Hg was evenly distributed in all components of LSD ash. Specific surface area was an important factor controlling the distribution of Hg in the different components of LSD ash, but not for As. Comparing the LSD ash data to samples collected from the economizer suggests that As was effectively captured by fly ash at 600{sup o}C, while Hg was not. Leaching tests demonstrated that As and Hg were more stable in the calcium-enriched fraction than in the fly-ash- or carbon-enriched fractions, potentially because of the greater pH of the leachate and subsequently greater stability of small amounts of calcium solids containing trace elements in these fractions. 37 refs., 8 figs., 2 tabs.

  20. Ash dispersal dynamics: state of the art and perspectives

    Science.gov (United States)

    Sulpizio, R.

    2013-05-01

    Volcanic ash, during dispersal and deposition, is among the major hazards from explosive eruptions. Volcanic ash fallout can disrupt communities downwind, interrupt surface transportation networks and lead to closure of airports. Airborne ash seriously threatens modern jet aircraft in flight. In several documented cases, encounters between aircraft and volcanic clouds have resulted in engine flameout and near crashes, so there is a need to accurately predict the trajectory of volcanic ash clouds in order to improve aviation safety and reduce economic losses. The ash clouds affect aviation even in distal regions, as demonstrated by several eruptions with far-range dispersal. Recent examples include Crater Peak 1992, Tungurahua 1999-2001, Mount Cleveland 2001, Chaitén 2008, Eyjafjallajökull 2010, Grimsvötn 2011, and Cordón-Caulle 2011. Amongst these, the April-May 2010 eruption of Eyjafjallajökull in Iceland provoked the largest civil aviation breakdown. Accumulation of tephra can produce roof collapse, interruption of lifelines (roads, railways, etc.), disruption to airport operations, and damage to communications and electrical power lines. Deposition of ash decreases soil permeability, increases surface runoff, and promotes floods. Ash leaching can result in the pollution of water resources, damage to agriculture, pastures, and livestock, impinge on aquatic ecosystems, and alteration of the geochemical environment on the seafloor. Despite the potential big impact, the dispersal dynamics of volcanic ash is still an unsolved problem for volcanologists, which claims for fiture high level research. Here, a critical overview about models (field, experimental and numerical) for inversion of field data to gain insights on physics of dispersal of volcanic ash is proposed. A special focus is devoted to some physical parameters that are far from a satisfactory inversion (e.g. reconstruction of total grain size distribution), and clues for future research are suggested.

  1. Ash formation, deposition, corrosion, and erosion in conventional boilers

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.A.; Jones, M.L. [Univ. of North Dakota, Grand Forks, ND (United States)

    1995-12-01

    The inorganic components (ash-forming species) associated with coals significantly affect boiler design, efficiency of operation, and lifetimes of boiler parts. During combustion in conventional pulverized fuel boilers, the inorganic components are transformed into inorganic gases, liquids, and solids. This partitioning depends upon the association of the inorganic components in the coal and combustion conditions. The inorganic components are associated as mineral grains and as organically associated elements, and these associations of inorganic components in the fuel directly influence their fate upon combustion. Combustion conditions, such as temperature and atmosphere, influence the volatility and the interaction of inorganic components during combustion and gas cooling, which influences the state and size composition distribution of the particulate and condensed ash species. The intermediate species are transported with the bulk gas flow through the combustion systems, during which time the gases and entrained ash are cooled. Deposition, corrosion, and erosion occur when the ash intermediate species are transported to the heat-transfer surface, react with the surface, accumulate, sinter, and develop strength. Research over the past decade has significantly advanced understanding of ash formation, deposition, corrosion, and erosion mechanisms. Many of the advances in understanding and predicting ash-related issues can be attributed to advanced analytical methods to determine the inorganic composition of fuels and the resulting ash materials. These new analytical techniques have been the key to elucidation of the mechanisms of ash formation and deposition. This information has been used to develop algorithms and computer models to predict the effects of ash on combustion system performance.

  2. Volcanic ash as fertiliser for the surface ocean

    Directory of Open Access Journals (Sweden)

    B. Langmann

    2010-04-01

    Full Text Available Iron is a key limiting micro-nutrient for marine primary productivity. It can be supplied to the ocean by atmospheric dust deposition. Volcanic ash deposition into the ocean represents another external and so far largely neglected source of iron. This study demonstrates strong evidence for natural fertilisation in the iron-limited oceanic area of the NE Pacific, induced by volcanic ash from the eruption of Kasatochi volcano in August 2008. Atmospheric and oceanic conditions were favourable to generate a massive phytoplankton bloom in the NE Pacific Ocean which for the first time strongly suggests a connection between oceanic iron-fertilisation and volcanic ash supply.

  3. Characterization of Offgas Generated During Calcination of Incinerator Ash Surrogates

    International Nuclear Information System (INIS)

    The Pacific Northwest National Laboratory (PNNL), in cooperation with the Los Alamos National Laboratory (LANL) and Safe Sites of Colorado (SSOC), developed a recommended flowsheet for the processing of plutonium-bearing incinerator ash stored at the Rocky Flats Environmental Technology Site (RFETS) (Lucy et al. 1998). This flowsheet involves a calcination pretreatment step, the purpose of which is to remove carbonaceous material from the incinerator ash. Removal of this material reduced the probability of process upsets, improved product quality, and increases ash waste loading. As part of the continued development of the recommended flowsheet, PNNL performed a series of tests to characterize the offgas generated during the calcination process

  4. Development of construction materials using coal fly-ash

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Moon Young; Yoo, Jang Han; Lee, Moo Sung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1996-12-01

    The research is intended to find out the possibilities for utility of building materials such as brick with various mixtures of the kaolin and clay. The kaolin belong to the PD, PC and WC grades which from the fly ash of the Honam and the Samcheonpo thermal power plants and clay (HD) from the Hwangdeung, Hadong and Sancheong areas. 1) -200 mesh grain size of fly ash shows higher alkali contents than +200 mesh grains. Especially, alkali components such as CaO (10.58 %), MgO (1.67 %) and Na{sub 2}O (0.53 %) have contributed to make dense structure because of the alkalis are fusion materials. For example, 50 % mixture ratio of fly ash and clay shows the compressional strength of 1,700 kg/cm{sup 2}. The higher mixture ratio of fly ash and clay, the higher compressional intensity is found in general. 2) As the result of the reaction between CaO and Na{sub 2}O compositions in the Honam fly ash, and SiO{sub 2} and Al{sub 2}O{sub 3} in clay at the 1,200 deg. C has shown the formation of plagioclase crystal. 3) Fly ash in the Samcheonpo thermal power plants has lower contents of alkali component than the fly ash in the Honam. If the mixture ratio of fly ash is 10 % the compressional strength is found to be 600-720 kg/cm{sup 2}, that is because of the higher concentrations of uncombustible carbon in the Samcheonpo plant. The compressional intensity decreases as the fly ash contents are increased. When the ratio of mixture in the fly ash is 50 %, the compressional intensity shows 270-300 kg/cm{sup 2}. 4) Mixture experiments among PD, PC and WC grades of kaolin, the sintering has not formed in the grains at the 1,200 deg. C and the compressional strength is rather low with 60{approx}125 kg/cm{sup 2}. At the temperature of sintering is 1250 deg. C the sintering in the grains has been taken place with 210 kg/cm{sup 2}. But the temperature of 1,300 deg. C, the surface of sintering materials shows cracks. 5) The possibilities for usage of fly ash to develop the bricks with various

  5. Behaviour of Onobrychis Viciifolia Growing on Fly Ash Experimental Parcels

    OpenAIRE

    Florica Morariu; Smaranda Mâsu; Dumitru Popescu

    2011-01-01

    Studies were conducted to identify a treatment method for upper layers of fly ash to cover them with vegetation. Fixing plant layer acts against erosion/washes of fly ash deposits. Studies emphasized the need of use of an organic fertilizer mixed with inorganic materials such as volcanic tuff and, also, the need of selecting a plant species compatible with the treated culture medium. The use of an amended variant of compost and modified volcanic tuff of fly ash layers shows that the selected ...

  6. Synthesis of high ion exchange zeolites from coal fly ash

    OpenAIRE

    Ayora, Carlos; Querol, Xavier; Moreno, N.; Alastuey, Andrés; Juan Mainar, Roberto; Andrés Gimeno, José Manuel; López Soler, Ángel; Medinaceli, Alejandro; Valero, Antonio

    2007-01-01

    This study focuses on the synthesis at a pilot plant scale of zeolitic material obtained from the coal fly ashes of the Teruel and Narcea power plants in Spain. After the optimisation of the synthesis parameters at laboratory scale, the Teruel and Narcea fly ashes were selected as low and high glass fly ashes. The pilot plant scale experiments were carried out in a 10 m3 reactor of Clariant SA (Barcelona, Spain). The results allowed obtaining 1.1 and 2.2 tonnes of zeolitic material with 40 an...

  7. Carbonatation Influence on Fly Ash and Portland Cement Mortars

    OpenAIRE

    P.L. Valdez–Tamez; A. Durán–Herrera; G. Fajardo–San Miguel; C.A. Juárez–Alvarado

    2009-01-01

    The influence of carbonation on mortars containing 25% of fly ash instead of the cementitious materials was studied. Mortar cylinder specimens were fabricated for 4 different W/C ratios: 0.35, 0.45, 0.55 and 0.65. Mortars with and without fly ash were subjected to an accelerated carbonation process. Volumetric weight, water absorption, compressive strength, water permeability, pH and mercury intrusion porosimetry of the mortar specimens were determined. Due to the fly ash pozzolanic potential...

  8. Element budgets of forest biomass combustion and ash fertilisation - a Danish case-study

    DEFF Research Database (Denmark)

    Ingerslev, Morten; Skov, Simon; Sevel, Lisbeth;

    2011-01-01

    the retention of various elements in the different ash fractions and utilise the nutrient recovery to evaluate the fertiliser quality of the examined ash. The mass and element flux of wood chips, bottom ash, cyclone fly ash and condensation sludge at Ebeltoft central heating plant was studied over a...

  9. 40 CFR 60.55b - Standards for municipal waste combustor fugitive ash emissions.

    Science.gov (United States)

    2010-07-01

    ... fugitive ash emissions. 60.55b Section 60.55b Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... municipal waste combustor fugitive ash emissions. (a) On and after the date on which the initial performance... combustion ash from an ash conveying system (including conveyor transfer points) in excess of 5 percent...

  10. Unsubstituted polyaromatic hydrocarbons (PAH's) in extracts of coal fly ash from the fly ash test cell in Montour, Pennsylvania

    International Nuclear Information System (INIS)

    Isotope Dilution Mass Spectrometry (IDMS) was used to identify and to quantify trace amounts of selected, unsubstituted polyaromatic hydrocarbons (PAH's) present in extracts of coal fly ash from the solid waste disposal test cell at Montour, Pennsylvania. Isotope dilution experiments using deuterated analogs of polyaromatic hydrocarbons demonstrated that the concentrations of benzo[a]pyrene and anthracene were lower than 1 ng/g of fly ash. Isotope dilution experiments demonstrated that benzo[a]pyrene could be detected at concentrations as high as 1 ng/g when an isotopic carrier was used at a concentration of 125 ng/g in the analytical method. Maximum concentrations of fluorene, fluoranthene, pyrene and chrysene were conservatively estimated to be 3 ng/g of fly ash, using a 95 percent confidence interval based on analytical precision of ±1 ng/g of fly ash. Concentrations of phenanthrene were found to range from 6 to 38 ng/g of fly ash with a mean concentration of 14 ng/g of fly ash. Two sources of phenanthrene were speculated: incomplete combustion of phenanthrene in the coal furnace and addition of phenanthrene to the fly ash after collection by electrostatic precipitators

  11. Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

    International Nuclear Information System (INIS)

    Highlights: ► A concrete formulation was optimized using Bottom Ash and APC ash. ► 10% of APC ash achieves good compromise between economic and performance aspects. ► The crushed concrete was evaluated as secondary building granular material. ► The environmental behavior allows its use as secondary material. ► The abrasion resistance is not good enough for its use as a road sub-base material. - Abstract: The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incineration (MSWI) bottom ash (BA) and air pollution control (APC) fly ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behavior whilst maximizing the reuse of APC fly ash was considered and assessed. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC fly ash content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured

  12. Determination of Ash Mixture Properties and Construction of Test Embankment - Part B

    OpenAIRE

    Yoon, Sungmin; Balunaini, Umashankar; Prezzi, Monica; Salgado, Rodrigo; Siddiki, Nayyar Zia

    2006-01-01

    Class F fly ash and bottom ash are solid residue byproducts produced by coal-burning plants. They are usually disposed off with a typical disposal rate of 80 % fly ash and 20 % bottom ash. To maximize the use of the coal ash, and thus significantly reduce the disposal problem that electric utility companies and our society in general face, the direct use of ponded or landfilled ash that is composed of high proportions of fly ash would be desirable. However, a general understanding of the beha...

  13. Determination of Ash Mixture Properties and Construction of Test Embankment - Part A

    OpenAIRE

    Kim, Bumjoo; Yoon, Sungmin; Balunaini, Umashankar; Prezzi, Monica; Salgado, Rodrigo

    2006-01-01

    Class F fly ash and bottom ash are solid residue byproducts produced by coal-burning plants. They are usually disposed off with a typical disposal rate of 80 % fly ash and 20 % bottom ash. To maximize the use of the coal ash, and thus significantly reduce the disposal problem that electric utility companies and our society in general face, the direct use of ponded or landfilled ash that is composed of high proportions of fly ash would be desirable. However, a general understanding of the beha...

  14. Indirect effects of emerald ash borer-induced ash mortality and canopy gap formation on epigaeic beetles.

    Science.gov (United States)

    Gandhi, Kamal J K; Smith, Annemarie; Hartzler, Diane M; Herms, Daniel A

    2014-06-01

    Exotic herbivorous insects have drastically and irreversibly altered forest structure and composition of North American forests. For example, emerald ash borer (Agrilus planipennis Fairmaire) from Asia has caused wide-scale mortality of ash trees (Fraxinus spp.) in eastern United States and Canada. We studied the effects of forest changes resulting from emerald ash borer invasion on epigaeic or ground beetles (Coleoptera: Carabidae) along a gradient of ash dieback and gap sizes in southeastern Michigan. Ground beetles were sampled in hydric, mesic, and xeric habitats in which black (Fraxinus nigra Marshall), green (Fraxinus pennsylvanica Marshall), and white (Fraxinus americana L.) ash were the most common species, respectively. During 2006-2007, we trapped 2,545 adult ground beetles comprising 52 species. There was a negative correlation between percent ash tree mortality in 2006 and catches of all beetles. Catches of Agonum melanarium Dejean (in 2006) and Pterostichus mutus (Say) (in 2006-2007) were negatively correlated with tree mortality and gap size, respectively. However, catches of Pterostichus corvinus Dejean were positively correlated with gap size in 2006. As ash mortality and average gap size increased from 2006 to 2007, catches of all beetles as well as P. mutus and Pterostichus stygicus (Say) increased (1.3-3.9 times), while species diversity decreased, especially in mesic and xeric stands. Cluster analysis revealed that beetle assemblages in hydric and mesic stand diverged (25 and 40%, respectively) in their composition from 2006 to 2007, and that hydric stands had the most unique beetle assemblages. Overall, epigaeic beetle assemblages were altered in ash stands impacted by emerald ash borer; however, these impacts may dissipate as canopy gaps close. PMID:24690169

  15. Coal Ash Corrosion Resistant Materials Testing

    Energy Technology Data Exchange (ETDEWEB)

    D. K. McDonald; P. L. Daniel; D. J. DeVault

    2007-12-31

    In April 1999, three identical superheater test sections were installed into the Niles Unit No.1 for the purpose of testing and ranking the coal ash corrosion resistance of candidate superheater alloys. The Niles boiler burns high sulfur coal (3% to 3.5%) that has a moderate alkali content (0.2% sodium equivalents), thus the constituents necessary for coal ash corrosion are present in the ash. The test sections were controlled to operate with an average surface metal temperature from approximately 1060 F to 1210 F which was within the temperature range over which coal ash corrosion occurs. Thus, this combination of aggressive environment and high temperature was appropriate for testing the performance of candidate corrosion-resistant tube materials. Analyses of the deposit and scale confirmed that aggressive alkali sulfate constituents were present at the metal surface and active in tube metal wastage. The test sections were constructed so that the response of twelve different candidate tube and/or coating materials could be studied. The plan was to remove and evaluate one of the three test sections at time intervals of 1 year, 3 years, and 5 years. This would permit an assessment of performance of the candidate materials as a function of time. Test Section A was removed in November 2001 after about 24 months of service at the desired steam temperature set point, with about 15.5 months of exposure at full temperature. A progress report, issued in October 2002, was written to document the performance of the candidate alloys in that test section. The evaluation described the condition of each tube sample after exposure. It involved a determination of the rate of wall thickness loss for these samples. In cases where there was more than one sample of a candidate material in the test section, an assessment was made of the performance of the alloy as a function of temperature. Test Sections B and C were examined during the November 2001 outage, and it was decided that

  16. Decontamination of acid water from uranium mining by ash filtration method

    International Nuclear Information System (INIS)

    The article discusses the applicability of power plant ashes for decontamination of acid mine water, with particular regard to the chemism and the factors influencing the purification efficiency. Enhanced use of power plant ashes will be a contribution to surface water protection. Mixtures of ash and lime are another interesting option. Natural precipitation will leach out part of the contaminants from the ash, so that special requirements must be made on ash tip design and construction. (orig.)

  17. Influences of Fly Ash on Concrete Product's Properties and Environmental Impact Reduction

    OpenAIRE

    Thipsuree Kornboonraksa; Thirdpong Srisukphun

    2015-01-01

    This research aimed to study effects of incorporating fly ash into concrete products. Scope of this study were (1) hazard identification of fly ash (2) study on standard testing of various concrete products and (3) study on environmental impact assessment of concrete products mixed with fly ash. Various types of fly ash namely A, B, C and D were sampling from different power plants. Hazard identification of fly ash was analyzed in terms of total threshold limit concentration (TTLC) and solubl...

  18. Solid State Multiwavelength LIDAR for Volcanic Ash Monitoring Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. proposes to develop a compact, multiwavelength LIDAR with polarization analysis capability that will be able to identify volcanic ash clouds...

  19. Ash properties of some dominant Greek forest species

    International Nuclear Information System (INIS)

    The elemental and chemical wood ash compositions of six dominant Greek fuels was investigated using a variety of techniques, including thermal gravimetric analysis (TG), differential thermal analysis (DTA), atomic absorption spectroscopy (AAS) and X-ray diffraction (XRD). In addition, the alkalinity of wood ash was determined by titration. The ash was prepared by combustion at low (600 deg. C), middle (800 deg. C) and high temperatures (1000 deg. C). The ash composition is very important because thousands of hectares of wildlands are burned annually in Greece. The resulting deposits affect soil properties (i.e., pH) and provide a source of inorganic constituents (i.e., Ca, K, Na, Mg, etc.), while the most soluble compounds (i.e., sodium and potassium hydroxides and carbonates) do not persist through the wet season. The samples selected were: Pinus halepensis (Aleppo pine), Pinus brutia (Calabrian pine), Olea europaea (Olive), Cupressus sempervirens (Italian cypress), Pistacia lentiscus (Mastic tree), Quercus coccifera (Holly oak)

  20. Ash Meadows National Wildlife Refuge : A plan for the future

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The management plan is to maintain Ash Meadows Refuge as a natural ecosystem. To accomplish this, the area will be restored as much as possible to conditions which...

  1. Fly ash based zeolitic pigments for application in anticorrosive paints

    Science.gov (United States)

    Shaw, Ruchi; Tiwari, Sangeeta

    2016-04-01

    The purpose of this work is to evaluate the utilization of waste fly ash in anticorrosive paints. Zeolite NaY was synthesized from waste fly ash and subsequently modified by exchanging its nominal cation Na+ with Mg2+ and Ca2+ ions. The metal ion exchanged zeolite was then used as anticorrosive zeolitic pigments in paints. The prepared zeolite NaY was characterized using X-Ray diffraction technique and Scanning electron microscopy. The size, shape and density of the prepared fly ash based pigments were determined by various techniques. The paints were prepared by using fly ash based zeolitic pigments in epoxy resin and the percentages of pigments used in paints were 2% and 5%. These paints were applied to the mild steel panels and the anticorrosive properties of the pigments were assessed by the electrochemical spectroscopy technique (EIS).

  2. Pretreatment and utilization of waste incineration bottom ashes

    DEFF Research Database (Denmark)

    Astrup, Thomas

    2007-01-01

    Within recent years, researchers and authorities have had increasing focus on leaching properties from waste incineration bottom ashes. Researchers have investigated processes such as those related to carbonation, weathering, metal complexation, and leaching control. Most of these investigations...

  3. Improved Sorting Scheme of Microstructure of Fly Ash

    Institute of Scientific and Technical Information of China (English)

    王立刚; 彭苏平

    2002-01-01

    Aiming at the problem of the existing sorting for microstructure of flyash, an improved scheme was put forward in this paper. First, fly ash particles are divided into four groups as low-calcium, iron, high calcium and char particle acco rding to the substance components of fly ash. Then fly ash particles are divided into 14 sub-groups, for example: cenospheres, plerospheres, solid spheres, porous char and dense char based on their chemical composition, shape and the chara cteristics of inner-structure of fly ash. It has a distinct difference in granu le configuration, inner-structure and substance components. Some disadvantages of the existing scheme such as unilateralism and imprecision have been overcome in the advanced schemes.

  4. Ash Meadows Pupfish Preserve: A proposal from The Nature Conservancy

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Ash Meadows region of southwest Nevada has evolved since the last period of glaciation into a unique alkali desert ecosystem. The remnant springs, pools and...

  5. PURIFICATION AND ENRICHMENT OF BIOGAS IN ASH-WATER MIXTURE

    Directory of Open Access Journals (Sweden)

    Andrzej Brudniak

    2014-10-01

    Full Text Available Biogas, produced in an aerobic digestion process, is a mixture of gases, and that is why its inexpensive and effective valorisation is essential. Research on this process is necessary in order to use biogas as a renewable energy source. The aim of this thesis is to present methods of biogas purification and enrichment in the fly ash - water mixture, that is generated on the base of fly ash produced during burning coal in power industry. Experience presented that the fly ash absorbs CO2 and H2S, even in conventional conditions. The absorption efficiency depends not only on the chemical composition of the ash but also on its physical properties. There was also a strong neutralization of alkaline waste combustion.

  6. Volcanic Ash Detection Using Raman LIDAR: "VADER" Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Volcanic ash is a significant hazard to aircraft engine and electronics and has caused damage to unwary aircraft and disrupted air travel for thousands of...

  7. Observation of nano copper in waste heat boiler fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C.Y. [Department of Environmental Engineering, National Cheng Kung University, Tainan City, Taiwan (China); Paul Wang, H. [Department of Environmental Engineering, National Cheng Kung University, Tainan City, Taiwan (China)]. E-mail: wanghp@mail.ncku.edu.tw; Wei, Yu-Ling [Department of Environmental Science, Tunghai University, Taichung City, Taiwan (China); Jou, C.J.G. [Department of Safety, Health and Environmental Engineering, National Kaohsiung First University of Science and Technology, Kaohsiung City, Taiwan (China); Huang, Y.C. [Department of Environmental Engineering, National Cheng Kung University, Tainan City, Taiwan (China)

    2006-11-15

    Fly ashes collected from waste heat boilers in the incineration process may possess representative chemical structure of toxic metals during incineration and their changes in the quench process at 1125-553 K and 503-493 K, respectively. Note that copper may play an important role in catalytic formation of dioxins during incineration. Speciation of copper in the fly ashes has, therefore, been studied by X-ray absorption spectroscopy in the present work. About 24% of nano copper in the fly ash was observed by least-squares-fitted XANES (X-ray absorption near edge structural) spectroscopy. Sintering of the fly ash at 1423 K for 30 min led to a reduction of the nano CuO content to 8%.

  8. Ash after forest fires. Effects on soil hydrology and erosion

    Science.gov (United States)

    Bodí, Merche B.

    2013-04-01

    Hillslopes were though to be most susceptible to enhanced hydro-geomorphological responses immediately following burning, with susceptibility declining during the first months or years depending on the soil and vegetation recovery. However, Cerdà (1998) found some indices in that immediately after the fire, the thin wettable ash layer that typically covers the ground could absorb rainfall and prevent or delay the onset of overland flow and associated erosion. Therefore the time lag while ash remains on the ground become of crucial importance to protect the soil after a wildfire. The effect of this ash layer was rarely been considered in detail because ash has often been reduced or redistributed by wind or water erosion before the onset of monitoring and thus the data collection typically begun some weeks or month after the fire. The first papers focussed only on ash and its hydrological effects were published by Cerdà and Doerr (2008) and by Woods and Balfour (2008). The results showed that the soil covered with ash indeed reduced and delayed surface runoff, reduced soil splash detachment and produced lower sediment yield compared to bare terrain. However, these findings arose more questions, as for instance: Why in other research there were indices that ash reduces infiltration? what is the mechanism by which why ash reduces overland flow? The research went further with Bodí PhD. First of all, it was crucial the agreement on the fact that the material "ash" is very variable depending on the original vegetation and the type and temperature of combustion. Therefore ash properties are different between wildfires even and within a fire. This is the main reason of its different effects and thus ash not always reduces runoff and sediment yield. In this way, depending on the nature of ash, it can increase overland flow if it is crusted (usually it contains a high content of calcium carbonate), it is water repellent (with high contents of organic carbon and specially

  9. Optical properties of fly ash. Volume 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Self, S.A.

    1994-12-01

    Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executive summary of the whole program followed by the dissertation of Ghosal and Ebert. Volume 2 contains the dissertation of Ebert which covers the measurements of the optical constants of slags, and calculations of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.

  10. Experimentally constraining the boundary conditions for volcanic ash aggregation

    Science.gov (United States)

    Kueppers, U.; Auer, B.; Cimarelli, C.; Scolamacchia, T.; Guenthel, M.; Dingwell, D. B.

    2011-12-01

    Volcanic ash is the primary product of various volcanic processes. Due to its size, ash can remain in the atmosphere for a prolonged period of time. Aggregation processes are a first-order influence on the residence time of ash in the atmosphere and its dispersion from the vent. Due to their internal structure, ash aggregates have been classified as ash pellets or accretionary lapilli. Although several concomitant factors may play a role during aggregation, there is a broad consensus that both 1) particle collision and 2) humidity are required for particles to aggregate. However, direct observation of settling aggregates and record of the boundary conditions favourable to their formation are rare, therefore limiting our understanding of the key processes that determine ash aggregates formation. Here, we present the first results from experiments aimed at reproducing ash aggregation by constraining the required boundary conditions. We used a ProCell Lab System of Glatt Ingenieurtechnik GmbH that is conventionally used for food and chemical applications. We varied the following parameters: 1) air flow speed [40-120 m3/h], 2) air temperature [30-60°C], 3) relative humidity [20-50 %], and 4) liquid droplets composition [water and 25% water glass, Na2SiO3]. The starting material (125-90 μm) is obtained by milling natural basaltic lapilli (Etna, Italy). We found that the experimental duration and the chosen conditions were not favourable for the production of stable aggregates when using water as spraying liquid. Using a 25% water-glass solution as binder we could successfully generate and investigate aggregates of up to 2 mm size. Many aggregates are spherical and resemble ash pellets. In nature, ash pellets and accretionary lapilli are the product of complex processes taking place at very different conditions (temperature, humidity, ash concentration, degree of turbulence). These experiments shed some first light on the ash agglomeration process for which direct

  11. Multifrequency radar imaging of ash plumes: an experiment at Stromboli

    Science.gov (United States)

    Donnadieu, Franck; Freret-Lorgeril, Valentin; Delanoë, Julien; Vinson, Jean-Paul; Peyrin, Frédéric; Hervier, Claude; Caudoux, Christophe; Van Baelen, Joël; Latchimy, Thierry

    2016-04-01

    Volcanic ash emissions in the atmosphere are hazardous to aviation while ash fallout affects people and human activities and may cause damage to infrastructures and economic losses. In the framework of the French Government Laboratory of Excellence ClerVolc initiative, an experiment was carried out on Stromboli volcano (Italy), between 28 September and 4 October 2015. The aim was to retrieve various physical properties of the ash plumes, especially the mass loading parameters which are critical for the modelling of ash dispersal. We used a complementary set of cutting edge techniques recording in different bands of the electromagnetic spectrum. The innovative instrument setup consisted in three radars, hyperspectral thermal infrared and dual-band UV cameras, a mini DOAS-Flyspec and a multigas sensor. A drone equipped with differential GPS was flown near the ash plumes with several sensors including SO2, CO2 and particle counter. We mainly focus on radar measurements of over 200 ash plumes and present some preliminary comparisons at three frequencies. The BASTA Doppler radar at 95 GHz, originally designed for atmospheric studies, was deployed at about 2.2 km in slant distance from the eruptive craters. It was configured to observe volumes above one of the active craters with a spatio-temporal resolution of 12.5 m and 1 s. From the same location, a 1.2 GHz volcano Doppler radar (VOLDORAD) was recording the signature of ballistics and small lapilli at 0.15 s in 60 m-deep volumes. In addition, a commercial 24 GHz micro rain Doppler radar (MRR) simultaneously recorded activity from the Rochette station, at 400 to 650 m from the active craters with a sampling rate of 10 s and a resolution of 25 m. The latter was pointing almost perpendicularly to the other radar beams. Reflectivity factors were measured inside the ash plume above the source vent by the BASTA radar (3 mm wavelength) spanning -9 to +21 dBZ. Fallout could sometimes be tracked during several minutes within

  12. Ash from cereal and rape straw used for heat production: liming effect and contents of plant nutrients and heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Sander, M.-L.; Andren, O. [Swedish University of Agricultural Sciences, Uppsala (Sweden). Dept. of Ecology and Environmental Research

    1997-01-01

    The composition of 79 samples of straw ash from seven heating plants in Sweden was analysed with the aim of evaluating straw ash as a fertilizer and liming agent. The variation in ash composition was explained mainly by ash fraction (bottom ash vs. fly ash) and straw type (wheat, barley, rye, rape) but also by heating plant. Compared with concentrations of Zn, Pb and Cd in bottom ash; levels in fly ash were 10-90 times higher. Fly ash also contained more Cu and K compared with bottom ash. The Cd/P ratio was 0.03 in bottom ash and 0.6 g Cd/kg P in fly ash. Ash from rape straw had a higher Ca content and liming effect compared with ash from cereal straw; e.g. the liming effect of rape ash was more than three times higher than that of wheat ash. The liming effect varied between 3.5 and 44% CaO and depended mainly on the Ca content. The average P content was 1.7% (0.2-4.4%) with slightly higher concentration in rape ash than in wheat ash. The potential for using straw ash as a fertilizer and liming agent is discussed. Compared with commercial fertilizers the use of bottom ash as a P fertilizer results in a lower addition of Cd. However, the total heavy metal content of straw ash poses a potential problem. 24 refs., 2 figs., 5 tabs.

  13. Phenolic acids as bioindicators of fly ash deposit revegetation.

    Science.gov (United States)

    Djurdjević, L; Mitrović, M; Pavlović, P; Gajić, G; Kostić, O

    2006-05-01

    The floristic composition, the abundance, and the cover of pioneer plant species of spontaneously formed plant communities and the content of total phenolics and phenolic acids, as humus constituents, of an ash deposit after 7 years of recultivation were studied. The restoration of both the soil and the vegetation on the ash deposits of the "Nikola Tesla-A" thermoelectric power plant in Obrenovac (Serbia) is an extremely slow process. Unfavorable physical and chemical characteristics, the toxicity of fly ash, and extreme microclimatic conditions prevented the development of compact plant cover. The abundance and cover of plants increased from the central part of the deposit towards its edges (ranging from 1-80%). Festuca rubra L., Crepis setosa Hall., Erigeron canadensis L., Cirsium arvense (L.) Scop., Calamagrostis epigeios (L.) Roth., and Tamarix gallica L. were the most abundant species, thus giving the highest cover. Humus generated during the decomposition process of plant remains represents a completely new product absent in the ash as the starting material. The amount of total phenolics and phenolic acids (38.07-185.16 microg/g of total phenolics and 4.12-27.28 microg/g of phenolic acids) in fly ash increased from the center of the deposit towards its edges in correlation with the increase in plant abundance and cover. Ash samples contained high amounts of ferulic, vanillic, and p-coumaric acid, while the content of both p-hydroxybenzoic and syringic acid was relatively low. The presence of phenolic acids indicates the ongoing process of humus formation in the ash, in which the most abundant pioneer plants of spontaneously formed plant communities play the main role. Phenolic compounds can serve as reliable bioindicators in an assessment of the success of the recultivation process of thermoelectric power plants' ash deposits. PMID:16418890

  14. Use of Recycled Aggregate and Fly Ash in Concrete Pavement

    OpenAIRE

    Myle N. James; Wonchang Choi; Taher Abu-Lebdeh

    2011-01-01

    Problem statement: Recycled materials aggregate from the demolished concrete structures and fly ash from burning coal shows the possible application as structural and non structural components in concrete structures. This research aims to evaluate the feasibility of using concrete containing recycled concrete aggregate and fly ash in concrete pavement. Approach: Two water cement ratio (0.45 and 0.55) the compressive strength, modulus of electricity and flexural streng...

  15. Heavy duty gas turbines experience with ash-forming fuels

    OpenAIRE

    Molière, M.; Sire, J

    1993-01-01

    The heavy duty gas turbines operating in power plants can burn various fuels ranging from natural gas to heavy oils. Ash-forming fuels can have detrimental effects on the turbine hardware such as : combustion troubles, erosion, corrosion and fouling by ashes. For decades, progress has been made by the gas turbine industry, especially in the fields of superalloy metallurgy, coating and cooling technology. Furthermore, fuel treatments inspired by the petroleum and marine-engine industries (elec...

  16. Characteristics of Bamboo Leaf Ash Blended Cement Paste and Mortar

    OpenAIRE

    Umoh A.A.; Odesola I.

    2015-01-01

    The use of bamboo leaf ash as cement supplement can contribute to reduction in cost and environmental hazard associated with cement production as well as waste pollution caused by the littered bamboo leaves. Therefore, the characteristics of cement paste and mortar incorporating bamboo leaf ash were investigated. The results of the physical properties of the pastes were within the requirements stipulated by relevant standards while that of the mortar cubes indicated that the compressive stren...

  17. Optimal Recycling Combination of Ash in South-East Finland

    OpenAIRE

    Deviatkin, Ivan; Havukainen, Jouni; Horttanainen, Mika

    2016-01-01

    The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type...

  18. The simulation of incineration ash in a burning process

    International Nuclear Information System (INIS)

    The paper first provides some problems of taking the radioactive wastes contaminated with cesium 137 in municipal waste incineration facilities. For analyzing the behaviors of cesium in an incinerator, a computer code was developed and the results presented. Ash concentration and distribution of particulate radius are used from incineration conditions, added circumstances from consideration of the chemical reaction between cesium compounds and ashes including chemical forms and using DEM model so as applicable to a real burning facility. (S. Ohno)

  19. KINETICS OF FLY ASH BENEFICIATION BY CARBON BURNOUT; FINAL

    International Nuclear Information System (INIS)

    Surface area analyses performed on fly ash samples reveal that the surface area is controlled by carbon content. The higher surface areas found in large particles are due to the presence of highly porous carbonaceous particles. Adsorption-desorption isotherms and t-plots of fly ash samples indicate that fly ash is porous. BJH Adsorption/Desorption pore size analysis reveal that pore diameters are independent of sieve size. They appear to be dependent only on the nature of the material which confers porosity. Based on the results of Brown and Dykstra (41) it is reasonable to assume that calculations of reaction rates at temperatures above 550 C were confounded by weight losses from processes other than carbon oxidation and, therefore, are not useful in determination of the temperature dependence of carbon oxidation in fly ash. The results of the present study indicate that temperatures below 550 C should be used for future studies in order to satisfactorily assess the temperature dependence of carbon oxidation in fly ash. Furthermore, it is also advisable that percent carbon determinations be performed on fly ash samples after the oxidation reactions to determine whether all carbon present in fly ash is oxidized. This will ensure that reaction rates are representative of the complete oxidation of carbon. An inverse relationship was determined between reaction rates and oxygen concentration for this study. As discussed, this may be due to volatilization of volatiles from fly ash and ease of transport of products away from the reaction sites by the action of the vacuum applied to the samples. A more accurate determination of oxygen dependence of carbon oxidation can be accomplished by the use of specialty gases containing different concentrations of oxygen which could eliminate the need to apply vacuum to the samples

  20. BS EN 450 fly ash: sustainable solutions for construction specialists

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-06-15

    ScotAsh produces pulverized fuel ash PFA to BS EN 450 from Scottish Power Longannet Power Station. It is Category N in fineness (not more than 40% retained on the 45 microns sieve and a limit of {+-} 10% in the supplier's declared mean value permitted). The datasheet discusses applications of the PFA and the advantages of its use in concrete. 3 figs., 1 tab., 9 photos.

  1. KINETICS OF FLY ASH BENEFICIATION BY CARBON BURNOUT

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Joseph N.D. Dodoo; Dr. Joseph M. Okoh

    2000-11-01

    Surface area analyses performed on fly ash samples reveal that the surface area is controlled by carbon content. The higher surface areas found in large particles are due to the presence of highly porous carbonaceous particles. Adsorption-desorption isotherms and t-plots of fly ash samples indicate that fly ash is porous. BJH Adsorption/Desorption pore size analysis reveal that pore diameters are independent of sieve size. They appear to be dependent only on the nature of the material which confers porosity. Based on the results of Brown and Dykstra (41) it is reasonable to assume that calculations of reaction rates at temperatures above 550 C were confounded by weight losses from processes other than carbon oxidation and, therefore, are not useful in determination of the temperature dependence of carbon oxidation in fly ash. The results of the present study indicate that temperatures below 550 C should be used for future studies in order to satisfactorily assess the temperature dependence of carbon oxidation in fly ash. Furthermore, it is also advisable that percent carbon determinations be performed on fly ash samples after the oxidation reactions to determine whether all carbon present in fly ash is oxidized. This will ensure that reaction rates are representative of the complete oxidation of carbon. An inverse relationship was determined between reaction rates and oxygen concentration for this study. As discussed, this may be due to volatilization of volatiles from fly ash and ease of transport of products away from the reaction sites by the action of the vacuum applied to the samples. A more accurate determination of oxygen dependence of carbon oxidation can be accomplished by the use of specialty gases containing different concentrations of oxygen which could eliminate the need to apply vacuum to the samples.

  2. Extractability of risk elements and nutrition elements from ash

    OpenAIRE

    Hrma, Jiří

    2012-01-01

    The thesis „Extractability of risk elements and nutrition elements from ash“ studies the determination of physicochemical properties of ash and compares the mobility of heavy metals and nutrition elements in various samples. The aim of the study was to determine the extractability of heavy metals and nutrition elements from biomass ash and their chemical speciation using sequential extraction procedure based upon Tessier which was modified for given matrix. The results permit to classify m...

  3. Production and characterization of zeolite from fly ash by xrd

    OpenAIRE

    González, Daniel R.; Pérez, Lucía; Santa, Alejandra; Ramírez, José H.

    2014-01-01

    By classical alkaline hydrothermal process, Zeolites were synthesized from fly ashes coming from a thermo electrical power plant. This process consisted on the reaction between the ash’s inorganic oxides (primarily aluminum and silicon oxides, which according to the characterization of the fly ash exceeded 80% of the sample) and NaOH in different concentrations in a batch reactor. Zeolites obtained were characterized by x-ray diffraction (XRD) analysis, which determines the crystalline phases...

  4. Recyclability of Concrete Pavement Incorporating High Volume of Fly Ash

    OpenAIRE

    Isamu Yoshitake; Takeo Ishida; Sunao Fukumoto

    2015-01-01

    Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass was experimentally investigated, focusing on the strength development at an early age. Limestone pow...

  5. Saw Dust Ash as Partial Replacement for Cement in Concrete

    OpenAIRE

    Raheem, A. A.; Olasunkanmi, B. S.; Folorunso, C. S.

    2012-01-01

    This research considered the use of saw dust ash as a pozzolan in the production of concrete. the study investigated the physical properties and chemical composition of saw dust ash (SDA) as well as the workability, and compressive strength properties of the concrete produced by replacing 5%, 10%, 15%, 20% and 25% by weight of ordinary Portland cement with SDA. Slump and compacting factor tests were carried out on the fresh concrete and compressive strength test on hardened concrete. The conc...

  6. Promoting effect of various biomass ashes on the steam gasification of low-rank coal

    International Nuclear Information System (INIS)

    Highlights: • Biomass ash was utilized to promote gasification of low rank coal. • Promoting effect of biomass ash highly depended on AAEM content in the ash. • Stability of the ash could be improved by maintaining AAEM amount in the ash. • Different biomass ash could have completely different catalytic activity. - Abstract: Application of biomass ash as a catalyst to improve gasification rate is a promising way for the effective utilization of waste ash as well as for the reduction of cost. Investigation on the catalytic activity of biomass ash to the gasification of low rank coal was performed in details in the present study. Ashes from 3 kinds of biomass, i.e. brown seaweed/BS, eel grass/EG, and rice straw/RS, were separately mixed with coal sample and gasified in a fixed bed downdraft reactor using steam as the gasifying agent. BS and EG ashes enhanced the gas production rate greater than RS ash. Higher catalytic activity of BS or EG ash was mainly attributed to the higher content of alkali and alkaline earth metal (AAEM) and lower content of silica in it. Higher content of silica in the RS ash was identified to have inhibiting effect for the steam gasification of coal. Stable catalytic activity was remained when the amount of AAEM in the regenerated ash was maintained as that of the original one

  7. Development of fly ash-based automotive brake lining

    Energy Technology Data Exchange (ETDEWEB)

    Mohanty, S.; Chugh, Y.P. [South Illinois University, Carbondale, IL (United States). College of Engineering

    2007-07-15

    Coal-fired power plants all over the world generate huge amounts of fly ash each year, 70 million tons of which are produced in the United States alone. Only 40% of all fly ashes generated in the USA find beneficial applications and rest have to be disposed off, which is burden for the generation industry. Fly ash particles possess certain characteristics that make them suitable for use in friction composites as a filter material. An attempt has been made through this research to incorporate more than 50wt% of fly ash particles in automotive brake lining friction composites. This paper presents the research carried out on development of friction composites, using fly ash obtained from a specific power plant in Illinois. Ingredients such as phenolic resin, aramid pulp, glass fiber, potassium titanate, graphite, aluminum fiber and copper powder were used in the composite development phase, in addition to the fly ash. The developed brake lining composites have exhibited consistent coefficients of friction in the range of 0.35-0.4, and wear rates lower than 12wt%.

  8. Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

    Directory of Open Access Journals (Sweden)

    Zhiliang Chen

    2016-07-01

    Full Text Available Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization of heavy metals in municipal solid waste incineration (MSWI fly ash. Three heavy metals (Cu, Cr, Pb loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a significant decrease in particle size, a rise in its BET-surface, and turning basic crystals therein into amorphous structures. The dissolution rate of acid buffering materials present in activated particles is enhanced, resulting in a rising pH value of the leachate, reducing the leaching out of some heavy metals.

  9. USE OF FLY ASH IN CONCRETE- A REVIEW

    Directory of Open Access Journals (Sweden)

    Sourav Ghosal

    2015-10-01

    Full Text Available Rapid increase in construction activities has resulted into a search for a supplementary cementious material when used in the conjunction with Portland cement contributing to the properties of hardened concrete through hydraulic or pozzolanic activity or both in the present scenario of shortage of construction materials. In view of today’s high cost of conventional building materials, there has been the major consensus in the large scale construction of housing system in the world. The effective housing techniques deal with reduction in cost of construction as well providing strength to buildings. The best way to dispose any waste material (fly ash is to use it as one of the ingredients in construction material. In developed countries, electrostatic precipitators collect fly ash which leads to greater fineness. Hence it shows good pozzolanic activity. The effective utilization fly ash in any field is possible only when a study of physical, chemical and mineralogical properties of the particular fly ash is undertaken. Fly ash is used as a supplementary cementious material in the production of Portland Cement Concrete. A supplementary cementious material when used in the conjunction with Portland cement contributes to the properties of hardened concrete through hydraulic or pozzolanic activity or both. The current review deals with the addition of fly ash and other composites into concrete and to study its various strength properties.

  10. Availability of sulfur in fly ash to plants

    Energy Technology Data Exchange (ETDEWEB)

    Elseewi, A.A.; Bingham, F.T.; Page, A.L.

    1978-01-01

    Fly ash from a coal-fired power plant was added to soil in variable amounts and the availability of sulfur to a variety of plant species from this source was compared to that of gypsum. The study was conducted under greenhouse conditions with a calcareous and two acid soils which were low in plant-available sulfur. The fly ash used contained 0.4% S, all of which is extractable by NH/sub 4/OAc. When mixed with a calcareous and an acid soil at rates of 1 to 2% by weight, the fly ash corrected a S deficiency in the soil and maximized the yield of alfalfa (Medicago sativa L.) and bermudagrass (Cynodon dactylon L.). The increase in yield (twofold to threefold in alfalfa and 40 to 70% in bermudagrass) was accompanied by an increase in the S content of the plant tops from a deficiency level (<0.1%) to a sufficiency level (greater than or equal to 0.2%). The availability of fly ash-S and gypsum (CaSO/sub 4/ . 2H/sub 2/O)-S was compared by the addition of equal amounts of S from the two sources (25-, 50-, and 100-mg S/kg soil) to an acid soil. Yield and S content of turnip (Brassica rapa L.) and white clover (Trifolium repens L.) were equally improved, demonstrating that the availability of fly ash derived-S is equivalent to that of gympsum-S.

  11. Recyclability of Concrete Pavement Incorporating High Volume of Fly Ash

    Directory of Open Access Journals (Sweden)

    Isamu Yoshitake

    2015-08-01

    Full Text Available Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass was experimentally investigated, focusing on the strength development at an early age. Limestone powder was added to improve the early strength; flexural strength at two days reached 3.5 MPa, the minimum strength for traffic service in Japan. The matured fly ash concrete made with a cement content of 200 kg/m3 achieved a flexural strength almost equal to that of the control concrete without fly ash. Additionally, Portland cement made from the tested fly ash concrete was tested to confirm recyclability, with the cement quality meeting the Japanese classification of ordinary Portland cement. Limestone-based recyclable fly ash concrete pavement is, thus, a preferred material in terms of sustainability.

  12. Effect of interfacial properties on mechanical stability of ash deposit

    Directory of Open Access Journals (Sweden)

    A. Ontiveros-Ortega

    2016-04-01

    Full Text Available The paper presents a study on the cohesion of volcanic ash particles using surface free energy determination and zeta potential analyses. This is a subject of great interest in physical volcanology, as many researches on volcanic particle aggregation are frequently reported. In this case, special attention is paid to the role of structural or hydration forces between hydrophilic surfaces, which are a consequence of the electron-donor/electron-acceptor character of the interface. From this point of view, the results are potentially interesting as they could give valuable insights into this process. The results are presented in terms of the total energy of interaction between dispersed particles, computed from the extended DLVO theory. Contributions to the total free energy of interaction were determined from the zeta potential and surface free energy of ash, measured under different experimental conditions. Two samples of basaltic volcanic ash (black and white with silica contents of 44% and 63% respectively are studied. The surface free energy and zeta potential were analysed for ashes immersed in different electrolytes (NaCl, CaCl2, FeCl3. The presence of electrolytes changes the surface properties of the solid materials. The analysis of total interaction energy between the ash particles in aqueous medium shows that soil cohesion strongly depends on ash surface properties, chemical nature, the adsorbed cation on the surface, and pH value.

  13. Using Satellite Based Techniques to Combine Volcanic Ash Detection Methods

    Science.gov (United States)

    Hendrickson, B. T.; Kessinger, C.; Herzegh, P.; Blackburn, G.; Cowie, J.; Williams, E.

    2006-12-01

    Volcanic ash poses a serious threat to aircraft avionics due to the corrosive nature of the silicate particles. Aircraft encounters with ash have resulted in millions of dollars in damage and loss of power to aircraft engines. Accurate detection of volcanic ash for the purpose of avoiding these hazardous areas is of the utmost importance to ensure aviation safety as well as to minimize economic loss. Satellite-based detection of volcanic ash has been used extensively to warn the aviation community of its presence through the use of multi-band detection algorithms. However, these algorithms are generally used individually rather than in combination and require the intervention of a human analyst. Automation of the detection and warning of the presence of volcanic ash for the aviation community is a long term goal of the Federal Aviation Administration Oceanic Weather Product Development Team. We are exploring the use of data fusion techniques within a fuzzy logic framework to perform a weighted combination of several multi-band detection algorithms. Our purpose is to improve the overall performance of volcanic ash detection and to test whether automation is feasible. Our initial focus is on deep, stratospheric eruptions.

  14. STRATEGIES AND TECHNOLOGY FOR MANAGING HIGH-CARBON ASH; SEMIANNUAL

    International Nuclear Information System (INIS)

    The overall objective of the present project is to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific research issues to be addressed include: the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; the effect of various low-NOx firing modes on ash properties and adsorptivity; and the kinetics and mechanism of ash ozonation. This data will provide scientific and engineering support of the ongoing process development activities. This first project period, experiments were carried out to better understand the fundamental nature of the ozonation effect on ash. Carbon surfaces were characterized by surfactant adsorption, and by X-ray Photoelectron Spectroscopy before and after oxidation, both by air at 440 C and by ozone at room temperature. The results strongly suggest that the beneficial effect of ozonation is in large part due to chemical modification of the carbon surfaces

  15. Damping properties of fly ash/epoxy composites

    Institute of Scientific and Technical Information of China (English)

    Jian Gu; Gaohui Wu; Xiao Zhao

    2008-01-01

    An inexpensive fly ash (FA), which is from a waste product, was employed to prepare fly ash/epoxy composites. The purpose of this study is to characterize the contributions of matrix viscoelasticity, hollow structure characteristic (porosity), and filler/matrix interface friction to the high vibration damping capacity of such composites. The damping properties of the composites were investigated in the temperature range of-40 to 150℃C and in the frequency range of 10 to 800 Hz by using a tension-compression mode. The results indicate that the peak value of damping loss factor (tanδ) for the fly ash/epoxy composites can reach 0.70-0.90 in test specification, and the attenuation of damping loss factor is inconspicuous with increasing frequency. In addition, scanning electron microscope (SEM) was used to observe the morphology of the fly ash as well as its distribution in the matrix, which will help to analyze the effect of fly ash on the damping properties of the fly ash/epoxy composites.

  16. Formation of Humic Substances in Weathered MSWI Bottom Ash

    Directory of Open Access Journals (Sweden)

    Haixia Zhang

    2013-01-01

    Full Text Available The study aimed at evaluating the humic substances (HSs content from municipal solid waste incinerator (MSWI bottom ash and its variation with time and the effect of temperature on HSs formation. The process suggested by IHSS was applied to extract HSs from two different bottom ash samples, and the extracted efficiency with NaOH and Na4P2O7 was compared. MSWI bottom ash samples were incubated at 37∘C and 50∘C for 1 year. HSs and nonhumic substances were extracted from the bottom ash sample with different incubated period by 0.1 M NaOH/Na4P2O7. Results show that the rate of humic acid formation increased originally with incubation time, reached a maximum at 12th week under 37∘C and at 18th week under 50∘C, and then decreased with time. More humic acid in MSWI bottom ash was formed under 50∘C incubated condition compared with that incubated under 37∘C. Also, the elemental compositions of HSs extracted from bottom ash are reported.

  17. [Study on mercury re-emissions during fly ash utilization].

    Science.gov (United States)

    Meng, Yang; Wang, Shu-Xiao

    2012-09-01

    The amount of fly ash produced during coal combustion is around 400 million tons per year in China. About 65%-68% of fly ash is used in building material production, road construction, architecture and agriculture. Some of these utilization processes include high temperature procedures, which may lead to mercury re-emissions. In this study, experiments were designed to simulate the key process in cement production and steam-cured brick production. A temperature programmed desorption (TPD) method was used to study the mercury transformation in the major utilization processes. Mercury re-emission during the fly ash utilization in China was estimated based on the experimental results. It was found that mercury existed as HgCl2 (Hg2 Cl2), HgS and HgO in the fly ash. During the cement production process, more than 98% of the mercury in fly ash was re-emitted. In the steam-curing brick manufacturing process, the average mercury re-emission percentage was about 28%, which was dominated by the percentage of HgCl2 (Hg2 Cl2). It is estimated that the mercury re-emission during the fly ash utilization have increased from 4.07 t in 2002 to 9.18 t in 2008, of which cement industry contributes about 96.6%. PMID:23243850

  18. Ash Reduction of Corn Stover by Mild Hydrothermal Preprocessing

    Energy Technology Data Exchange (ETDEWEB)

    M. Toufiq Reza; Rachel Emerson; M. Helal Uddin; Garold Gresham; Charles J. Coronella

    2014-04-22

    Lignocellulosic biomass such as corn stover can contain high ash content, which may act as an inhibitor in downstream conversion processes. Most of the structural ash in biomass is located in the cross-linked structure of lignin, which is mildly reactive in basic solutions. Four organic acids (formic, oxalic, tartaric, and citric) were evaluated for effectiveness in ash reduction, with limited success. Because of sodium citrate’s chelating and basic characteristics, it is effective in ash removal. More than 75 % of structural and 85 % of whole ash was removed from the biomass by treatment with 0.1 g of sodium citrate per gram of biomass at 130 °C and 2.7 bar. FTIR, fiber analysis, and chemical analyses show that cellulose and hemicellulose were unaffected by the treatment. ICP–AES showed that all inorganics measured were reduced within the biomass feedstock, except sodium due to the addition of Na through the treatment. Sodium citrate addition to the preconversion process of corn stover is an effective way to reduced physiological ash content of the feedstock without negatively impacting carbohydrate and lignin content.

  19. The Mineral Transformation of Huainan Coal Ashes in Reducing Atmospheres

    Institute of Scientific and Technical Information of China (English)

    LI Han-xu; Yoshihiko Ninomiya; DONG Zhong-bing; ZHANG Ming-xu

    2006-01-01

    By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope (CCSEM),X-ray diffraction (XRD) and X-ray fluorescence (XRF), the ash composition and the mineral components of six typical Huainan coals of different origins were studied. The transformation of mineral matter at high temperatures was tracked by XRD in reducing conditions. The quartz phase decreased sharply and the anorthite content tended to increase at first and then decreased with increasing temperatures. The formed mullite phase reached a maximum at 1250 ℃ but showed a tendency of slow decline when the temperature was over 1250 ℃. The mullite formed in the heating process was the main reason of the high ash melting temperature of Huainan coals. Differences in peak intensity of mullite and anorthite reflected differences in phase concentration of the quenched slag fractions, which contributed to the differences in ash melting temperatures. The differences in the location of an amorphous hump maximum indicated differences of glass types which may affect ash melting temperatures. For Huainan coal samples with relatively high ash melting temperatures, the intensity of the diffraction lines for mullite under reducing condition is high while for the samples with relatively low ash melting temperature the intensity for anorthite is high.

  20. Toxicity of and metals in coal combustion ash leachate

    International Nuclear Information System (INIS)

    Land disposal of coal combustion ash can have a potential impact on the ecosystem due to the leaching of metals with increasing acidity of precipitation. The effect of pH on the concentration of metals leached from coal combustion ash was studied and the toxicity of the leachate measured. Bottom coal combustion ash was leached with hydrochloric acid (HCl) or acetic acid (CH3COOH) at pH 4,5,6 or 7. The toxicity of the aqueous leachates and concentrations of the metals (arsenic, cadmium, chromium, copper, iron, lead, nickel, silver and zinc) therein were measured using Microtox (Vibrio fischeri-EC50%) and atomic absorption spectrophotometry, respectively. Toxicity and metal concentrations of the leachates were highest when ash was leached with HCl at pH 4. Toxicity and metal concentrations of ash leached with CH3COOH were significantly lower compared with ash leached with HCl. A high correlation was observed between the toxicity and the metal concentrations in both the acid leachates

  1. On-conveyor belt determination of ash in coal

    International Nuclear Information System (INIS)

    A laboratory feasibility study has been carried out on new and advanced neutron and gamma-ray analysis systems for the direct on-conveyor belt analysis of ash in coal without the need for sample by-lines. Such an analysis system could deliver the combined advantages of a direct on-conveyor configuration with new and accurate analysis techniques. An industry survey of 18 coal companies carried out in early 1996 indicated that accurate on-belt ash analysis is of the highest priority. Subsequent laboratory work has focussed on the investigation of methods with the potential for improving the accuracy of ash content measurement relative to existing on-belt ash analysers, the most widely-used of which are based on dual energy gamma-ray transmission (DUET), which is sensitive to variations in ash composition. The current work indicates that on-belt neutron/gamma-ray techniques combined with advanced spectral analysis techniques show promise for development into an on-belt ash analysis system which is significantly less sensitive to composition changes than DUET and which analyses a much larger proportion of coal on the belt, thus eliminating some key sources of analysis error

  2. STRATEGIES AND TECHNOLOGY FOR MANAGING HIGH-CARBON ASH

    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen; Indrek Kulaots

    2004-02-13

    The overall objective of the present project was to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific issues addressed included: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity based on pilot-plant studies; and (3) the kinetics and mechanism of ash ozonation. This laboratory data has provided scientific and engineering support and underpinning for parallel process development activities. The development work on the ash ozonation process has now transitioned into a scale-up and commercialization project involving a multi-industry team and scheduled to begin in 2004. This report describes and documents the laboratory and pilot-scale work in the above three areas done at Brown University and the University of Utah during this three-year project.

  3. High temperature co-treatment of bottom ash and stabilized fly ashes from waste incineration

    DEFF Research Database (Denmark)

    Sørensen, Mette Abildgaard; Mogensen, E.P.B.; Lundtorp, Kasper;

    2001-01-01

    Bottom ashes from two Danish municipal solid waste incineration plants were heated at 900 degreesC with iron oxide stabilized air pollution control residues at actual mass flow ratios (9:1), simulating a treating method for the residues. The two residues were cotreated, producing one combined...... stream that may be utilized as a secondary road construction material. Scanning electron microscope analysis and grain size distribution analysis indicated that sintering of the particles did not occur. Batch leaching tests at liquid/solid 10 I/kg at a range of pH-values (6-10) quantified with respect to...

  4. Characteristics of fly ash and bottom ash from the municipal solid waste incineration plant in Shanghai

    International Nuclear Information System (INIS)

    Background: Incineration is an attractive method of energy production and waste reduction for the treatment of municipal solid waste (MSW). However, the secondary pollutants followed such as fly ash (FA), bottom ash (BA) from the waste incineration are always a concern. Yet few articles provide detailed information about the physical and chemical characteristics of trace elements in ash at the molecular level. Purpose: The elemental concentrations and microstructure characteristics of ash were investigated to understand the distribution and migration of the elements in MSW incineration process. Methods: The study of the characteristics of FA and BA from Shanghai MSW incineration plant was based on the concentrations of elements, water-soluble salts, microstructure, section-distribution of the elements in single particle, isotope ratio and chemical species of Pb, which were studied respectively by using synchrotron radiation X-ray fluorescence (SR-XRF), Ion Chromatography (IC), Scanning electron microscopy (SEM), X-ray energy dispersive microanalysis (EDX), Synchrotron radiation micro-beam X-ray fluorescence (μ-XRF), Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and X-ray absorption near-edge structure (XANES) spectra. Results: Mass concentrations of most metal elements in FA were higher than those in BA, especially Pb and Cd, which had been obviously enriched. FA particles were of relatively smaller size and rougher surface than those of BA, which brought easier adsorption of heavy metals in FA. The large enrichment factors of Pb, Cd, Cu and Zn indicated these elements were in extreme pollution state. Water-soluble salts in FA and BA mainly existed as chloride and sulfate of Ca, Na and K. The ion concentrations in FA were generally higher than those in BA. Results of μ-XRF suggested that Pb, Zn, Cu, Cr, Fe and Mn had nonuniform distributions and highly localized to some small regions in FA and BA. Isotope ratio of Pb in FA and BA was similar. Chemical

  5. Complete survey of German sewage sludge ash.

    Science.gov (United States)

    Krüger, Oliver; Grabner, Angela; Adam, Christian

    2014-10-21

    The amount of sewage sludge produced worldwide is expected to further increase due to rising efforts in wastewater treatment. There is a growing concern against its direct use as fertilizer due to contamination of the sludge with heavy metals and organic pollutants. Incinerating the sludge degrades organic compounds almost completely and concentrates heavy metals and phosphorus. However, the sewage sludge ash (SSA) is almost completely disposed of and with it all resources are removed from the economic cycle. Comprehensive knowledge of the composition of SSA is crucial to assess the resource recovery potentials. We conducted a survey of all SSA emerging in Germany and determined the respective mass fractions of 57 elements over a period of one year. The median content of phosphorus was 7.9%, indicating an important recovery potential. Important trace elements were Zn (2.5 g/kg), Mn (1.3 g/kg), and Cu (0.9 g/kg). Mass fractions of technology metals such as V, Cr, Ga, Nb, and rare earths were comparatively low. Considering the possible use of SSA as secondary raw material for fertilizer production it should be noted that its Cd and U content (2.7 mg/kg and 4.9 mg/kg respectively) is significantly lower than that of rock phosphate based mineral fertilizers. PMID:25265150

  6. Rice husk ash as a source of silica in alkali-activated fly ash and granulated blast furnace slag systems

    OpenAIRE

    Mejía, J. M.; Puertas, F.

    2014-01-01

    [EN]This study assesses the viability of using an agro-industrial by-product, rice husk ash (RHA) from a Colombian rice company’s combustion facility, as a total replacement for the commercial sodium silicate ordinarily used in alkaliactivated binders. Fly ash (FA), granulated blast furnace slag (GBFS) and binary 50FA:50GBFS blended pastes were activated with a mix of sodium hydroxide and either sodium silicate or one of two types of RHA. The pastes were characterised ...

  7. Assessing the potential of coal ash and bagasse ash as inorganic amendments during composting of municipal solid wastes.

    Science.gov (United States)

    Mohee, Romeela; Boojhawon, Anuksha; Sewhoo, Babita; Rungasamy, Selven; Somaroo, Geeta D; Mudhoo, Ackmez

    2015-08-15

    This study investigates the potential of incorporating inorganic amendments such as coal and bagasse ashes in different composting mixes. 10 different composting mixes were assessed as follows: A-20% bagasse ash (BA) with unsorted municipal solid wastes (UMSW); B-40% BA with UMSW; C-UMSW; D-20% BA with sorted municipal solid wastes (SMSW); E-40% BA with SMSW; F-SMSW; G-20% coal ash (CA) with UMSW; H-40% CA with UMSW; I-20% CA with SMSW and J-40% CA with SMSW. The composting processes were carried out in rotary drum composters. Composting mixes D, F, G and I achieved a temperature above 55 °C for at least 3 days, with the following peak temperatures: D-62 °C, F-57 °C, G-62 °C and I-58 °C. D resulted in the highest average net Volatile solids (VS) degradation of 68.6% and yielded the highest average volume reduction of 66.0%. The final compost from D, G, I, C and F were within range for electrical conductivities (EC) (794-1770 μS/cm) and pH (6.69-7.12). The ashes also helped in maintaining high average water holding capacities within the range of 183-217%. The C/N ratio of sorted wastes was improved by the addition of 20% coal ash and bagasse ash. Higher germination indices, above 0.8 were obtained for the ash-amended compost (D, G, I), indicating the feasibility and enhancement of using bagasse and coal ash as inorganic amendment in the composting process. Regarding heavy metals content, the chromium concentration for the composting mix G was found to be the highest whereas mixes D and I showed compliance with the MS (Mauritian Standards) 164 standards. PMID:26093343

  8. All European Ash Species are Susceptible to Emerald Ash Borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae – a Far Eastern Invader

    Directory of Open Access Journals (Sweden)

    Yu. N. Baranchikov

    2014-12-01

    Full Text Available Emerald ash borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae – an example of a destructive invasive insect which abruptly enlarged its initially East-Asian area in 80–90s of the previous century. Nowadays this species is the main pest of ash (Fraxinus trees in USA and Canada and is quickly spreading over 11 administrative regions of Russia. It is very important to determine a list of possible host plants of A. planipennis for the pest risk assessment of invasion of this pest over the territory of Central and Western Europe. In its native area – North-Eastern Asia – this buprestid is a secondary consumer of dying trees of East-Asian ash species F. сhinensis and F. mandshurica. Healthy trees of these species are highly resistant to the pest. No examples of resistant ash species were found at North American continent. Documentary data are presented for the first time on infestation of three European ash species at the territory of the Main Botanical Garden of the Russian Academy of Sciences in Moscow, Russia by the emerald ash borer. At the first time this pest was registered at the garden in 2011. During the period of 2010–2014 EAB killed from 70 to 100 % of trees of European ash species: Fraxinus excelsior, F. angustifolia (= F. oxycarpa and F. ornus. At the same period from 81 to 90 % of specimens of North American ash species (F. pennsylvanica and F. americana were killed by this buprestid. Simultaneously dead trees of Asian species F. mandshurica and F. chinensis (= F. rhynchophyla did not carry any trace of EAB infestation. This case study is a good example of the «sentinel trees» concept’s usefulness. Arboretums with collections of non-native plants may serve as «ecological traps» for the local pests and pathogens – potential invasive organisms in the source regions of introduced plants.

  9. Reactivity of oil shale ashes towards sulfur dioxide. 3. recurrent use of ash for flue gas purification

    International Nuclear Information System (INIS)

    A comparison of the reactivity of solid wastes formed during electricity production by firing pulverized Estonian oil shale was prepared and some specific characteristics of oil shale ash were pointed out. The results of the industrial-scale experiments at the Baltic Power Plants confirmed the efficiency of using cyclone ash and mud in recycle to reduce the SO2 emission by combustion of powered oil shale for electricity production

  10. What Controls the Sizes and Shapes of Volcanic Ash? Integrating Morphological, Textural and Geochemical Ash Properties to Decipher Eruptive Processes

    Science.gov (United States)

    Liu, E. J.; Cashman, K. V.; Rust, A.

    2015-12-01

    Volcanic ash particles encompass a diverse spectrum of shapes as a consequence of differences in the magma properties and the magma ascent and eruption conditions. We show how the quantitative analysis of ash particle shapes can be a valuable tool for deciphering magma fragmentation and transport processes. Importantly, integrating morphological data with ash texture (e.g. bubble and crystal sizes) and dissolved volatile data provides valuable insights into the physical and chemical controls on the resulting ash deposit. To explore the influence of magma-water interaction (MWI) on fine ash generation, we apply this multi-component characterisation to tephra from the 2500BC Hverfjall Fires, Iceland. Here, coeval fissure vents spanned sub-aerial to shallow lacustrine environments. Differences in the size and morphology of pyroclasts thus reflect fragmentation mechanisms under different near-surface conditions. Using shape parameters sensitive to both particle roughness and internal vesicularity, we quantify the relative proportions of dense fragments, bubble shards, and vesicular grains from 2-D SEM images. We show that componentry (and particle morphology) varies as a function of grain size, and that this variation can be related back to the bubble size distribution. Although both magmatic and hydromagmatic deposits exhibit similar component assemblages, they differ in how these assemblages change with grain size. These results highlight the benefits of characterising ash deposits over a wide range of grain sizes, and caution against inferring fragmentation mechanism from a narrow grain size range. Elevated matrix glass S concentrations in hydromagmatic ash (600-1500 ppm) compared to those in magmatic ash and scoria lapilli (200-500 ppm) indicate interrupted vesiculation. In contrast to the subaerial 'dry' deposits, fragmentation during MWI likely occurred over a greater range of depths with quench rates sufficient to prevent post-fragmentation degassing. High

  11. The 1815 Tambora ash fall: implications for transport and deposition of distal ash on land and in the deep sea

    Science.gov (United States)

    Kandlbauer, Jessica; Carey, Steven N.; Sparks, R. Stephen J.

    2013-04-01

    Tambora volcano lies on the Sanggar Peninsula of Sumbawa Island in the Indonesian archipelago. During the great 1815 explosive eruption, the majority of the erupted pyroclastic material was dispersed and subsequently deposited into the Indian Ocean and Java Sea. This study focuses on the grain size distribution of distal 1815 Tambora ash deposited in the deep sea compared to ash fallen on land. Grain size distribution is an important factor in assessing potential risks to aviation and human health, and provides additional information about the ash transport mechanisms within volcanic umbrella clouds. Grain size analysis was performed using high precision laser diffraction for a particle range of 0.2 μm-2 mm diameter. The results indicate that the deep-sea samples provide a smooth transition to the land samples in terms of grain size distributions despite the different depositional environments. Even the very fine ash fraction (advances versus the ash component depositing once the eruption terminates. With the historical data on eruption duration (maximum 24 h) and volumetric flow rate of the umbrella cloud (˜1.5-2.5 × 1011 m3/s) as input to the improved model, and assuming a combination of 3 h Plinian phase and 21 h co-ignimbrite phase, it reduces the mean deviation of the predicted versus observed grain size distribution by more than half (˜9.4 % to ˜3.7 %) if both ash components are considered.

  12. The effect of fly ash and coconut fibre ash as cement replacement materials on cement paste strength

    Science.gov (United States)

    Bayuaji, R.; Kurniawan, R. W.; Yasin, A. K.; Fatoni, H. AT; Lutfi, F. M. A.

    2016-04-01

    Concrete is the backbone material in the construction field. The main concept of the concrete material is composed of a binder and filler. Cement, concrete main binder highlighted by environmentalists as one of the industry are not environmentally friendly because of the burning of cement raw materials in the kiln requires energy up to a temperature of 1450° C and the output air waste CO2. On the other hand, the compound content of cement that can be utilized in innovation is Calcium Hydroxide (CaOH), this compound will react with pozzolan material and produces additional strength and durability of concrete, Calcium Silicate Hydrates (CSH). The objective of this research is to explore coconut fibers ash and fly ash. This material was used as cement replacement materials on cement paste. Experimental method was used in this study. SNI-03-1974-1990 is standard used to clarify the compressive strength of cement paste at the age of 7 days. The result of this study that the optimum composition of coconut fiber ash and fly ash to substitute 30% of cement with 25% and 5% for coconut fibers ash and fly ash with similar strength if to be compared normal cement paste.

  13. Water retention properties of ashes; Vattenretentionsegenskaper hos aska

    Energy Technology Data Exchange (ETDEWEB)

    Hemstroem, Kristian; Ezziyani, Samir; Bendz, David

    2009-05-15

    The water holding properties of a material can be described with a water retention curve (also called pF curve or characteristic curve). The importance of this material property has until now been neglected in waste and rest products contexts. There is an eminent need for knowledge of the water holding properties of ash and rest products in order to improve the possibility to perform i) assessment of leaching from rest product used in constructions, ii) dimensioning of covers built with rest products and iii) assessment of long term properties of land fill waste concerning leaching, especially for stabilized ash with a monolithic characteristics. The aim of this project was to increase the knowledge of the water holding properties of ashes by determining water retention curves with laboratory methods on four ash materials with the potential to be used in constructions. In the project, four ashes has been studied; one MSWI bottom ash from SYSAV, one aged MSWI bottom ash from Gaerstadverket and two fly ashes from incineration of biofuels; one from SCA Ortviken and one from Jaemtkraft AB. For comparison, data from a silt soil studied in another SGI project is presented. When determining a water retention curve for a specific material water from the examined, beforehand water saturated, sample is eliminated under controlled circumstances in a pressure plate extractor. The sample is exposed to a pressure, with increasing degree, squeezing excess water out of the material. The excess water is measured for each increased pressure step and the remaining volumetric water content in the material can be calculated. The results from such measurements are presented in water retention curves, in which the volumetric water content is plotted as a function of the capillary pressure. The water retention curves shows how various materials differ in water content at the same pressure. The results from the study showed that ashes have great water holding capacity. The study also

  14. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar

    International Nuclear Information System (INIS)

    Highlights: • Results show POFA is adaptable as replacement in FA based geopolymer mortar. • The increase in POFA/FA ratio delay of the compressive development of geopolymer. • The density of POFA based geoploymer is lower than FA based geopolymer mortar. - Abstract: This paper presents the effects and adaptability of palm oil fuel ash (POFA) as a replacement material in fly ash (FA) based geopolymer mortar from the aspect of microstructural and compressive strength. The geopolymers developed were synthesized with a combination of sodium hydroxide and sodium silicate as activator and POFA and FA as high silica–alumina resources. The development of compressive strength of POFA/FA based geopolymers was investigated using X-ray florescence (XRF), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and field emission scanning electron microscopy (FESEM). It was observed that the particle shapes and surface area of POFA and FA as well as chemical composition affects the density and compressive strength of the mortars. The increment in the percentages of POFA increased the silica/alumina (SiO2/Al2O3) ratio and that resulted in reduction of the early compressive strength of the geopolymer and delayed the geopolymerization process

  15. Comparison of various bioassays for dioxins measurements in fuel gas, fly ash and bottom ash

    Energy Technology Data Exchange (ETDEWEB)

    Ota, S.; Kin-ichi, S. [Ministry of the Environment, Tokyo (Japan); Masatoshi, M.; Shin-ichi, S. [National Institute for Environmental Studies, Tsukuba (Japan)

    2004-09-15

    In Japan, the control standards for dioxins (PCDDs, PCDFs and Co-PCBs) in the emission gas, fly and bottom ashes from waste incinerators have been defined in the Law Concerning Special Measures against Dioxins (Dioxins Law). Based on the Dioxins law, an installation personnel of waste incinerators of specified facilities shall measure dioxins in the emission gas and fly and bottom ashes more than once every year followed by reporting the results to their prefectural governor. The present regulating procedure has been set to use high-resolution gas chromatography/ high-resolution mass spectrometry (HRGC/HRMS, hereafter GC/MS) systems to determine dioxin-concentrations. However, the GC/MS measurements are often money- and timeconsuming, since they need complicated steps for sample preparation, expensive equipments and highly skilled technicians. Therefore, it is of high priority to develop rapid and economical alternative methods to measure dioxins. Recently, various assays using biological reactions have drawn a high degree of attention as a candidate for alternative measurement methods of dioxins. During the past decade several studies demonstrated the utility of a chemical (GC/MS) and biological (bioassays/biomarkers) control of waste thermal recycling processes like pyrolysis or incineration treatment. In this paper, we report the results of our recent examinations on the possibility to apply various bioassays to supplementary methods for the present procedure.

  16. Clay formation and metal fixation during weathering of coal fly ash

    International Nuclear Information System (INIS)

    The enormous and worldwide production of coal fly ash cannot be durably isolated from the weathering cycle, and the weathering characteristics of fly ash must be known to understand the long-term environmental impact. The authors studied the weathering of two coal fly ashes and compared them with published data from weathered volcanic ash, it's closest natural analogue. Both types of ash contain abundant aluminosilicate glass, which alters to noncrystalline clay. However, this study reveals that the kinetics of coal fly ash weathering are more rapid than those of volcanic ash because the higher pH of fresh coal fly ash promotes rapid dissolution of the glass. After about 10 years of weathering, the noncrystalline clay content of coal fly ash is higher than that of 250-year-old volcanic ash. The observed rapid clay formation together with heavy metal fixation imply that the long-term environmental impact of coal fly ash disposal may be less severe and the benefits more pronounced than predicted from previous studies on unweathered ash. Their findings suggest that isolating coal fly ash from the weathering cycle may be counterproductive because, in the long-term under conditions of free drainage, fly ash is converted into fertile soil capable of supporting agriculture

  17. Influence of Coal Blending on Ash Fusibility in Reducing Atmosphere

    Directory of Open Access Journals (Sweden)

    Mingke Shen

    2015-05-01

    Full Text Available Coal blending is an effective way to organize and control coal ash fusibility to meet different requirements of Coal-fired power plants. This study investigates three different eutectic processes and explains the mechanism of how coal blending affects ash fusibility. The blended ashes were prepared by hand-mixing two raw coal ashes at five blending ratios, G:D = 10:90 (G10D90, G:D= 20:80 (G20D80, G:D = 30:70 (G30D70, G:D = 40:60 (G40D60, and G:D = 50:50 (G50D50. The samples were heated at 900 °C, 1000 °C, 1100 °C, 1200 °C, and 1300 °C in reducing atmosphere. XRD and SEM/EDX were used to identify mineral transformations and eutectic processes. The eutectic processes were finally simulated with FactSage. Results show that the fusion temperatures of the blended ashes initially decrease and then increase with the blending ratio, a trend that is typical of eutectic melting. Eutectic phenomena are observed in D100, G10D90, and G30D70 in different degrees, which do not appear in G100 and G50D50 for the lack of eutectic reactants. The main eutectic reactants are gehlenite, magnetite, merwinite, and diopside. The FactSage simulation results show that the content discrepancy of merwinite and diopside in the ashes causes the inconsistent eutectic temperatures and eutectic degrees, in turn decrease the fusion temperature of the blended ash and then increase them with the blending ratio.

  18. Ash deposition impacts in the power industry

    International Nuclear Information System (INIS)

    There have been great strides in understanding the fundamental underpinnings of the slagging and fouling phenomena. Unfortunately as fuel quality changes due to coal pricing, mine closures, government regulations, market forces, etc., boilers and boiler operators continue to be plagued by poorer operating performance than desired. While improvements have been made, the need to address fundamental coal quality issues and how they affect deposition, emissions, handling, and combustion continues to be relevant. This paper presents the results of a study to assess how prevalent coal quality issues are to the power generation industry. A survey of selected EPRI members was made to determine the major areas where coal quality effects power generation and a reliability and availability assessment of the NERC GADS database for the years 1995 to 2004 was completed. This database was used to determine the lost generation through either forced outages, forced derates or planned outages and derates due to coal quality or slagging and fouling issues. The results clearly demonstrated that slagging, fouling, corrosion and fuel blending continue to be the leading coal quality concerns of utility personnel. Ash chemistry resulting from fuel blending and new coals being utilized continue to be the main area for needed utility support. A minimum estimated annual economic impact of over $1.2 billion was calculated for all coal- and lignite-fired boilers in the US based on coal quality and deposition occurrences. While this annual economic loss is huge, these outages and derates account for only about 1.6% of the total number of outages and derate occurrences and 2.5% of the total lost MW-hour generation. An annual evaluation of the coal quality and deposition-based outages and derates did not show a clear trend. In fact, the coal quality-based outages and derates generally increased over the ten-year period. (author)

  19. Speciation of Chromium in Bottom Ash Obtained by the Incineration of the Leather Waste Shavings

    Directory of Open Access Journals (Sweden)

    k. louhab

    2006-01-01

    Full Text Available The evolution of bottom ash morphology and chromium metals behavior during incineration of a leather waste shavings at different incineration temperature have been studied. The Cr, Ca, Mg, Cl rates in bottom ashes, flay ashes and emitted gases in different incineration temperature of the tannery wastes are also determined. The morphology of the bottom ashes obtained by incineration at different temperature from the leather waste shavings was examined by MEB. The result show that the temperature and the length of incineration influence on the structure of the bottom ash and on the chromium in the bottom ash.

  20. Occurrence of volcanic ash in the Quaternary alluvial deposits, lower Narmada basin, western India

    Indian Academy of Sciences (India)

    Rachna Raj

    2008-02-01

    This communication reports the occurrence of an ash layer intercalated within the late Quaternary alluvial succession of the Madhumati River, a tributary of the lower Narmada River. Petrographic, morphological and chemical details of glass shards and pumice fragments have formed the basis of this study. The ash has been correlated with the Youngest Toba Tuff. The finding of ash layer interbedded in Quaternary alluvial sequences of western Indian continental margin is significant, as ash being datable material, a near precise time-controlled stratigraphy can be interpreted for the Quaternary sediments of western India. The distant volcanic source of this ash requires a fresh re-assessment of ash volume and palaeoclimatic interpretations.

  1. Ash Deposition in Biomass Combustion or Co-Firing for Power/Heat Generation

    Directory of Open Access Journals (Sweden)

    Jesse Zhu

    2012-12-01

    Full Text Available This paper presents a concise overview of ash deposition in combustion or co-firing of biomass (woody biomass, agricultural residues, peat, etc. with other fuels for power/heat generation. In this article, the following five research aspects on biomass combustion ash deposition are reviewed and discussed: influence of biomass fuel characteristics, deposit-related challenges, ash deposition monitoring and analysis of ash deposits, mechanisms and chemistry of fly ash deposition, and key technologies for reducing ash deposition and corrosion in biomass-involved combustion.

  2. BRICKS WITH TOTAL REPLACEMENT OF CLAY BY FLY ASH MIXED WITH DIFFERENT MATERIALS

    OpenAIRE

    J.N Akhtar; J. Alam; M N Akhtar

    2011-01-01

    Fly ash is a powdery substance obtained from the dust collectors in the Thermal power plants that use coal as fuel. From the cement point of view the mineralogy of Fly ash is important as it contains 80% - 90% of glass. The impurities in coal-mostly clays, shale’s, limestone & dolomite; they cannot be burned so they turn up as ash. The Fly ash of class C category was used as a raw material to total replacement of clay for making Fly ash bricks. In present study the effect of Fly ash with high...

  3. A Comparative study Of Catalityc Activity Of Heterogeneous Base Of Banana Stem Ash And Fly Ash On Production Of Biodiesel Byultrasonic

    Directory of Open Access Journals (Sweden)

    Marlinda

    2015-08-01

    Full Text Available Abstract The use of heterogeneous catalysts in the production of biodiesel provides many advantages due to heterogeneous catalysts can be easily separated from the product so that it can be reused. This research using heterogeneous catalysts derived from natural materials namely banana stem ash and coal fly ash containing alkali and alkaline earth elements. The preparation of catalyst from banana stem ash and coal fly ash used activator KOH 1.9 N and impregnation with KNO3 15 and then heated to a temperature of 550 0C for 3 hours. Results of preparation banana stem ash contains potassium of 36.52 and surface area of 41.901 m2g. This work presents the effect of ultrasonic assisted of waste cooking oil with methanol as solvent using banana stem ash and coal fly ash as catalyst. The diameter of catalyst particles of banana stem ash and coal fly ash varied at 50 100 150 200 and 250 mesh. The transesterification reaction was performed in the presence of ultrasonic operating frequency constant at 40 kHz methanol molar ratio to oil of 9 1 and reaction time of 30 minutes. The methyl ester biodiesel content of product was 93.26 of banana stems ash and 57 of coal fly ash respectively. The physical property was compared with the National Indonesia Standard SNI 2006 with a density viscosity cloud point flash point and cetane number.

  4. Hierarchical zeolites from class F coal fly ash

    Science.gov (United States)

    Chitta, Pallavi

    Fly ash, a coal combustion byproduct is classified as types class C and class F. Class C fly ash is traditionally recycled for concrete applications and Class F fly ash often disposed in landfills. Class F poses an environmental hazard due to disposal and leaching of heavy metals into ground water and is important to be recycled in order to mitigate the environmental challenges. A major recycling option is to reuse the fly ash as a low-cost raw material for the production of crystalline zeolites, which serve as catalysts, detergents and adsorbents in the chemical industry. Most of the prior literature of fly ash conversion to zeolites does not focus on creating high zeolite surface area zeolites specifically with hierarchical pore structure, which are very important properties in developing a heterogeneous catalyst for catalysis applications. This research work aids in the development of an economical process for the synthesis of high surface area hierarchical zeolites from class F coal fly ash. In this work, synthesis of zeolites from fly ash using classic hydrothermal treatment approach and fusion pretreatment approach were examined. The fusion pretreatment method led to higher extent of dissolution of silica from quartz and mullite phases, which in turn led to higher surface area and pore size of the zeolite. A qualitative kinetic model developed here attributes the difference in silica content to Si/Al ratio of the beginning fraction of fly ash. At near ambient crystallization temperatures and longer crystallization times, the zeolite formed is a hierarchical faujasite with high surface area of at least 360 m2/g. This work enables the large scale recycling of class F coal fly ash to produce zeolites and mitigate environmental concerns. Design of experiments was used to predict surface area and pore sizes of zeolites - thus obviating the need for intense experimentation. The hierarchical zeolite catalyst supports tested for CO2 conversion, yielded hydrocarbons

  5. Mercury capture by selected Bulgarian fly ashes: Influence of coal rank and fly ash carbon pore structure on capture efficiency

    Science.gov (United States)

    Kostova, I.J.; Hower, J.C.; Mastalerz, Maria; Vassilev, S.V.

    2011-01-01

    Mercury capture by fly ash C was investigated at five lignite- and subbituminous-coal-burning Bulgarian power plants (Republika, Bobov Dol, Maritza East 2, Maritza East 3, and Sliven). Although the C content of the ashes is low, never exceeding 1.6%, the Hg capture on a unit C basis demonstrates that the low-rank-coal-derived fly ash carbons are more efficient in capturing Hg than fly ash carbons from bituminous-fired power plants. While some low-C and low-Hg fly ashes do not reveal any trends of Hg versus C, the 2nd and, in particular, the 3rd electrostatic precipitator (ESP) rows at the Republika power plant do have sufficient fly ash C range and experience flue gas sufficiently cool to capture measurable amounts of Hg. The Republika 3rd ESP row exhibits an increase in Hg with increasing C, as observed in other power plants, for example, in Kentucky power plants burning Appalachian-sourced bituminous coals. Mercury/C decreases with an increase in fly ash C, suggesting that some of the C is isolated from the flue gas stream and does not contribute to Hg capture. Mercury capture increases with an increase in Brunauer-Emmett-Teller (BET) surface area and micropore surface area. The differences in Hg capture between the Bulgarian plants burning low-rank coal and high volatile bituminous-fed Kentucky power plants suggests that the variations in C forms resulting from the combustion of the different ranks also influence the efficiency of Hg capture. ?? 2010 Elsevier Ltd.

  6. Interactive influence of leaf age, light intensity, and girdling on green ash foliar chemistry and emerald ash borer development.

    Science.gov (United States)

    Chen, Yigen; Poland, Therese M

    2009-07-01

    Biotic and abiotic environmental factors affect plant nutritional quality and defensive compounds that confer plant resistance to herbivory. Influence of leaf age, light availability, and girdling on foliar nutrition and defense of green ash (Fraxinus pennsylvanica Marsh) was examined in this study. Longevity of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), adults reared on green ash foliage subjected to these factors was assayed. Mature leaves generally were more nutritious with greater amino acids and a greater ratio of protein to non-structural carbohydrate (P:C) than young leaves, in particular when trees were grown in shade. On the other hand, mature leaves had lower amounts of trypsin and chymotrypsin inhibitors, and total phenolics compared to young leaves. Lower defense of mature leaves alone, or along with higher nutritional quality may lead to increased survival and longevity of emerald ash borer feeding on mature leaves. Sunlight reduced amino acids and P:C ratio, irrespective of leaf age and girdling, and elevated total protein of young foliage, but not protein of mature leaves. Sunlight also dramatically increased all investigated defensive compounds of young, but not mature leaves. Girdling reduced green ash foliar nutrition, especially, of young leaves grown in shade and of mature leaves grown in sun. However emerald ash borer performance did not differ when fed leaves from trees grown in sun or shade, or from girdled or control trees. One explanation is that emerald ash borer reared on lower nutritional quality food may compensate for nutrient deficiency by increasing its consumption rate. The strong interactions among leaf age, light intensity, and girdling on nutrition and defense highlight the need for caution when interpreting data without considering possible interactions. PMID:19568811

  7. Investigation of the chemical composition of ash generated from Kosovo lignite and the possibility for biological land reclamation on ash dumps

    Energy Technology Data Exchange (ETDEWEB)

    Urosevic, D.; Filipovic, R. [Mining Institute Belgrade, Belgrade (Yugoslavia)

    1997-07-01

    This paper presents the results of investigation of the chemical composition and other properties of ash generated in the coal combustion process in the coal-fired power plants Kosovo, in order to determine the possibilities for biological land reclamation on ash dumps and other degraded soil surfaces. It was established that a certain chemical composition of ash has a beneficial effect on biological land reclamation of ash dumps, thus protecting the environment (i.e. the area surrounding the ash dumps), against pollution. It was concluded that, because of the high percentage of calcium and other earth-alkaline and toxic elements, the ash should not be used as substitution for agricultural production. Ash dumps in Kosovo are not so susceptible to erosion since CaO{sub 3} acts as a binding component. 22 refs., 7 tabs.

  8. Impact of coal fly ash addition on ash transformation and deposition in a full-scale wood suspension-firing boiler

    DEFF Research Database (Denmark)

    Wu, Hao; Bashir, Muhammad Shafique; Jensen, Peter Arendt;

    2013-01-01

    Ash transformation and deposition during pulverized wood combustion in a full-scale power plant boiler of 800 MWth were studied with and without the addition of coal fly ash. The transient ash deposition behavior was characterized by using an advanced deposit probe system at two boiler locations...... of the deposits. Overall, the results from this work suggest that coal fly ash can be an effective additive to minimize the possible ash deposition and corrosion problems during suspension-firing of wood. © 2013 Elsevier Ltd. All rights reserved....... constant after a few hours. The formed deposits, especially those at the location with low flue gas temperatures, contained a considerable amount of K2SO4, KCl, and KOH/K2CO3. With the addition of a large amount (about 4 times of the mass flow of wood ash) of coal fly ash to the boiler, these alkali...

  9. Sulfur-bearing coatings on fly ash from a coal-fired power plant: Composition, origin, and influence on ash alteration

    Science.gov (United States)

    Fishman, N.S.; Rice, C.A.; Breit, G.N.; Johnson, R.D.

    1999-01-01

    Fly ash samples collected from two locations in the exhaust stream of a coal-fired power plant differ markedly with respect to the abundance of thin (???0.1 ??m) sulfur-rich surface coatings that are observable by scanning electron microscopy. The coatings, tentatively identified as an aluminum-potassium-sulfate phase, probably form upon reaction between condensed sulfuric acid aerosols and glass surfaces, and are preferentially concentrated on ash exposed to exhaust stream gases for longer. The coatings are highly soluble and if sufficiently abundant, can impart an acidic pH to solutions initially in contact with ash. These observations suggest that proposals for ash use and predictions of ash behavior during disposal should consider the transient, acid-generating potential of some ash fractions and the possible effects on initial ash leachability and alteration. ?? 1998 Elsevier Science Ltd.

  10. Recycling Jorf Lasfar fly ash as an additive to cement

    Directory of Open Access Journals (Sweden)

    Hamadi A

    2012-09-01

    Full Text Available Recycling fly ash is a good example of valorization of waste. It gives a solution the environmental problem by avoiding land filling, and reducing CO2 emission in the atmosphere. In this work we studied the physical-chemical characteristics of Jorf Lasfar fly ash. The parameters investigated were particle size, density, specific surface Blaine, chemical and mineralogical compositions. The techniques used are scanning electronic microscope (SEM, transmission electronic microscope (TEM, X-rays fluorescence (XRF, X-rays diffraction (XRD and atomic spectrometry emission coupled with inductive plasma ICP. We also conducted a study on the mechanical behavior of type CPJ45 cements produced from a combined grinding of clinker, limestone and gypsum. The substitution of a portion of the clinker by different percentages of fly ash was conducted. We noticed that the compression and bending resistances for these mixtures went through a maximum at 28 days with the addition of 7% (by mass of ash. This result showed that the mineral and chemical compositions of this ash conferred a Pozzoulanic power to the cement studied.

  11. An efficient and not polluting bottom ash extraction system

    International Nuclear Information System (INIS)

    This paper reports that boiler waste water effluent must meet more and more tighter requirements to comply with environmental regulations; sluice water resulting from bottom ash handling is one of the main problems in this context, and many utilities are under effort to maximize the reuse of the sluice water, and, if possible, to meet the aim of zero water discharge from bottom ash handling system. At the same time ash reuse efforts gain strength in order to minimize waste production. One solution to these problems can be found in an innovative Bottom Ash Extraction System (MAC System), marked by the peculiarity to be a continuous dry ash removal; the system has been developed in the last four years by MAGALDI INDUSTRIE SRL in collaboration with ANSALDO Ricerche, the R and D department of ANSALDO, the main Italian Boiler Manufacturer, and is now installed in six ENEL Boilers. The elimination of the water as separation element between the bottom part of the furnace and the outside atmosphere gives advantages mainly from the environmental view point, but a certain improvement in the boiler efficiency has also been demonstrated by the application of the system

  12. Delineation of a volcanic ash body using electrical resistivity profiling

    International Nuclear Information System (INIS)

    Four lines of electrical resistivity profiling (ERP) were performed to define the extent of a shallow Quaternary volcanic ash deposit being mined in the United States. Inversion results of ERP proved suitable for defining the thickness and lateral extent of the volcanic ash deposit at this testing site. These interpretations were confirmed by shallow borehole drilling. The model sensitivity information indicates that inverted models possess sufficient resolving power down to a depth of 7 m and are fairly consistent in terms of horizontal resolution along the four ERP lines. The bottom of most of the volcanic ash deposit in the study area is less than 7 m in depth. Based on synthesis of the ERP and drill information, the limits of the mineable ash bed resources were clearly defined. Moreover, by integrating the ERP results with a minimal number of optimally placed borings, the volume of the volcanic ash deposit was established at a lesser cost, and with greater accuracy than would be possible with a traditionally designed grid drilling programme

  13. Interaction mechanisms of organic contaminants with burned straw ash charcoal.

    Science.gov (United States)

    Huang, Wenhai; Chen, Baoliang

    2010-01-01

    Black carbons (e.g., charcoal) have a great impact on the transport of organic contaminants in soil and water because of its strong affinity and ubiquity in the environment. To further elucidate their interaction mechanism, sorption of polar (p-nitrotoluene, m-dinitrobenzene and nitrobenzene) and nonpolar (naphthalene) aromatic contaminants to burned straw ash charcoal under different de-ashed treatments were investigated. The sorption isotherms fitted well with Freundlich equation, and the Freundlich N values were all around 0.31-0.38, being independent of the sorbate properties and sorbent types. After sequential removal of ashes by acid treatments (HCl and HCl-HF), both adsorption and partition were enhanced due to the enrichment of charcoal component. The separated contribution of adsorption and partition to total sorption were quantified. The effective carbon content in ash charcoal functioned as adsorption sites, partition phases, and hybrid regions with adsorption and partition were conceptualized and calculated. The hybrid regions increased obviously after de-ashed treatment. The linear relationships of Freundlich N values with the charring-temperature of charcoal or biochar (the charred byproduct in biomass pyrolysis) were observed based on the current study and the cited publications which included 15 different temperatures (100-850 degrees C), 10 kinds of precursors of charcoal/biochar, and 10 organic sorbates. PMID:21235190

  14. Activated carbon for mercury control: Implications for fly ash management

    Energy Technology Data Exchange (ETDEWEB)

    Pflughoeft-Hassett, Debra F.; Hassett, David J.; Buckley, Tera D.; Heebink, Loreal V.; Pavlish, John H. [Energy and Environmental Research Center, 15 North 23rd Street, Stop 9018, Grand Forks, North Dakota 58202-9018 (United States)

    2009-11-15

    As more utilities begin to use activated carbon injection (ACI) for mercury control, the potential for the presence of elevated concentrations of mercury, other air toxic elements, and activated carbon to impact fly ash management needs to be evaluated. Several Energy and Environmental Research Center (EERC) projects have allowed the collection of comparative baseline fly ash samples and associated fly ash-activated carbon (AC) samples from full-scale demonstrations of ACI for mercury emission control. These samples were evaluated for mercury and air toxic element content and mobility and for performance criteria to facilitate a better understanding of the impact of these components to specific utilization applications, including use as a mineral admixture in concrete. These data are compared with published data from samples collected at similar large-scale mercury emission control tests. The data presented are in agreement with previous results from the EERC, the U.S. Environmental Protection Agency, and elsewhere that mercury associated with fly ash is stable and unlikely to be released under most management conditions. Additionally, this paper will discuss the potential for fly ash-AC samples to be used as a mineral admixture in concrete and other large-volume use applications. (author)

  15. Flowable Backfill Materials from Bottom Ash for Underground Pipeline

    Directory of Open Access Journals (Sweden)

    Kyung-Joong Lee

    2014-04-01

    Full Text Available The purpose of this study was to investigate the relationship between strength and strain in manufacturing controlled low strength materials to recycle incineration bottom ash. Laboratory tests for controlled low strength materials with bottom ash and recycled in-situ soil have been carried out. The optimum mixing ratios were 25%–45% of in-situ soil, 30% of bottom ash, 10%–20% of fly ash, 0%–3% of crumb rubber, 3% of cement, and 22% of water. Each mixture satisfied the standard specifications: a minimum 20 cm of flowability and 127 kPa of unconfined compressive strength. The average secant modulus (E50 was (0.07–0.08 qu. The ranges of the internal friction angle and cohesion for mixtures were 36.5°–46.6° and 49.1–180 kPa, respectively. The pH of all of the mixtures was over 12, which is strongly alkaline. Small-scale chamber tests for controlled low strength materials with bottom ash and recycled in-situ soil have been carried out. Vertical deflection of 0.88–2.41 mm and horizontal deflection of 0.83–3.72 mm were measured during backfilling. The vertical and horizontal deflections of controlled low strength materials were smaller than that of sand backfill.

  16. Durability of incinerator ash waste encapsulated in modified sulfur cement

    International Nuclear Information System (INIS)

    Waste form stability under anticipated disposal conditions is an important consideration for ensuring continued isolation of contaminants from the accessible environment. Modified sulfur cement is a relatively new material and has only recently been applied as a binder for encapsulation of mixed wastes. Little data are available concerning its long-term durability. Therefore, a series of property evaluation tests for both binder and waste-binder combinations have been conducted to examine potential waste form performance under storage and disposal conditions. These tests include compressive strength, biodegradation, radiation stability, water immersion, thermal cycling, and leaching. Waste form compressive strength increased with ash waste loadings to 30.5 MPa at a maximum incinerator ash loading of 43 wt %. Biodegradation testing resulted in no visible microbial growth of either bacteria or fungi. Initial radiation stability testing did not reveal statistically significant deterioration in structural integrity. Results of 90 day water immersion tests were dependent on the type of ash tested. There were no statistically significant changes in compressive strength detected after completion of thermal cycle testing. Radionuclides from ash waste encapsulated in modified sulfur cement leached between 5 and 8 orders of magnitude slower than the leach index criterion established by the Nuclear Regulatory Commission (NRC) for low-level radioactive waste. Modified sulfur cement waste forms containing up to 43 wt % incinerator fly ash passed EPA Toxicity Characteristic Leaching Procedure (TCLP) criteria for lead and cadmium leachability. 11 refs., 2 figs., 5 tabs

  17. Optimising Ambient Setting Bayer Derived Fly Ash Geopolymers

    Directory of Open Access Journals (Sweden)

    Evan Jamieson

    2016-05-01

    Full Text Available The Bayer process utilises high concentrations of caustic and elevated temperature to liberate alumina from bauxite, for the production of aluminium and other chemicals. Within Australia, this process results in 40 million tonnes of mineral residues (Red mud each year. Over the same period, the energy production sector will produce 14 million tonnes of coal combustion products (Fly ash. Both industrial residues require impoundment storage, yet combining some of these components can produce geopolymers, an alternative to cement. Geopolymers derived from Bayer liquor and fly ash have been made successfully with a compressive strength in excess of 40 MPa after oven curing. However, any product from these industries would require large volume applications with robust operational conditions to maximise utilisation. To facilitate potential unconfined large-scale production, Bayer derived fly ash geopolymers have been optimised to achieve ambient curing. Fly ash from two different power stations have been successfully trialled showing the versatility of the Bayer liquor-ash combination for making geopolymers.

  18. Uncertainty in volcanic ash cloud forecasting: sources and quantification (Invited)

    Science.gov (United States)

    Folch, A.

    2013-12-01

    Volcanic ash clouds formed during explosive volcanic eruptions can disperse in the atmosphere over larger distances jeopardizing aerial navigation. The trajectories and extent of ash clouds are forecasted operationally coupling atmospheric transport and numerical weather prediction models. The major uncertainties in simulations come from wind fields, eruption source parameters (eruption rate, vertical distribution of ash in the atmosphere and particle granulometry) and removal processes (ash aggregation, wet and dry deposition mechanisms). The global air traffic disruptions following the 2010 and 2011 eruptions of Eyjafjallajökull and Cordón Caulle forced a revision of the modelling approaches in order to provide a more robust and reliable response to the social needs. Strategies to reduce and quantify uncertainties are being introduced at both research and operational levels, including data assimilation, ensemble modelling and probabilistic forecasts. This requires collaboration amongst volcanological and meteorological communities. Initiatives such as the 2nd IUGG-WMO workshop on ash dispersal forecast and civil aviation (Geneva, 18-20 November 2013) help to develop strategies for a closer working relationship and further collaboration amongst scientific communities and between scientists and aviation industry and other stakeholders.

  19. Use of sugarcane straw ash for zeolite synthesis

    Directory of Open Access Journals (Sweden)

    Denise Alves Fungaro, Thais Vitória da Silva Reis

    2014-01-01

    Full Text Available The amount of biomass combustion residue is growing nowadays due to constant increasing demands of biomass utilization. The biomass ash produced currently is disposed on agricultural fields. The presence of metals, chlorine, sulphur and other species may have significant impacts on soils and the recycling of soil nutrient. The main challenge is related to the increase of possible applications of this byproduct. Sugarcane straw ash (SCSA was used in a study on synthesis of zeolitic material by alkaline conventional hydrothermal treatment. Different experimental conditions, such as, reaction time, alkali hydroxide concentration and liquid/solid ratio were studied. Raw ash material and synthesis products were characterized by X-Ray Fluorescence, Fourier transform infrared spectroscopy powder, X-ray diffraction, cation exchange capacity and scanning electron microscopic. The presence of zeolite hydroxysodalite confirms successful conversion of native SCSA into zeolitic material. Sugarcane straw ash utilization minimizes the environmental impact of disposal problems and further appears as an alternative for the future sustainable large-scale management of biomass ash.

  20. Ash contents of foodstuff samples in environmental radioactivity analysis

    International Nuclear Information System (INIS)

    Statistical data of the ash content in various environmental samples obtained from an environmental radioactivity survey project commissioned by the Japanese government of Science and Technology Agency (at present Ministry of Education, Culture, Sports, Sciences and Technology) during the past 10 years are expressed for establishing a standard of ash content in environmental samples based on radioactivity analysis. The ash content for some kinds of environmental samples such as dietary food, milk, Japanese radish, spinach, fish, green tea and potato was reviewed in the light of statistical and stochastic viewpoints. For all of the samples reviewed in this paper, the coefficient of variation varied from 4.7% for milk to 36.3% for cabbage. Dietary food and milk samples were reviewed more than 1900 and 1400 samples, respectively. Especially, ash content of dietary food depended mainly on the dietary culture reflected on the period. However it showed an almost invariant distribution within 18.7% of coefficient of variation during the past 10 years. Pretreatment of environmental samples especially ashing processes are important from the viewpoint on environmental radioactivity analysis, which is one of the especial fields in analytical chemistry. Statistical reviewed data obtained in this paper may be useful for sample preparation. (author)

  1. Synthesis of Zeolites by Alkaline Activation of Fly Ash

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In terms of mineral transformation, and chemical composition of acid-soluble component as a function of reaction time, the effect of alkaline solution on zeolite-like fly ash was studied by employing fly ash and NaOH solution as starting materials. When fly ash and 1€? 0mol/L NaOH solution were processed at 100℃ for 24h with 1:10 W/S rat io in a relatively closed system, powder XRD patterns of resulting pro ducts indicated the formation of various zeolites. Zeolite P crystalli zed early at low alkaline concentration, which was replaced then by ze olites X and A. At high concentration, hydroxy sodalite was the only n ew phase. Quartz, in fly ash and NaOH solution system, gradually disso lved, and mullite, however, remained stable. It was concluded that, wi th Al/Si and Na/Si finally reaching equilibrium in molar ratio, compos ition of starting mixtures affects the crystallization of zeolite from fly ash.

  2. The utilisation of fly ash in CO2 mineral carbonation

    Directory of Open Access Journals (Sweden)

    Jaschik Jolanta

    2016-03-01

    Full Text Available The fixation of CO2 in the form of inorganic carbonates, also known as mineral carbonation, is an interesting option for the removal of carbon dioxide from various gas streams. The captured CO2 is reacted with metal-oxide bearing materials, usually naturally occurring minerals. The alkaline industrial waste, such as fly ash can also be considered as a source of calcium or magnesium. In the present study the solubility of fly ash from conventional pulverised hard coal fired boilers, with and without desulphurisation products, and fly ash from lignite fluidised bed combustion, generated by Polish power stations was analysed. The principal objective was to assess the potential of fly ash used as a reactant in the process of mineral carbonation. Experiments were done in a 1 dm3 reactor equipped with a heating jacket and a stirrer. The rate of dissolution in water and in acid solutions was measured at various temperatures (20 - 80ºC, waste-to-solvent ratios (1:100 - 1:4 and stirrer speeds (300 - 1100 min-1. Results clearly show that fluidised lignite fly ash has the highest potential for carbonation due to its high content of free CaO and fast kinetics of dissolution, and can be employed in mineral carbonation of CO2.

  3. Separation of carbon from fly ash using froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    Walker, A.; Wheelock, T.D. [Iowa State University, Ames, IO (United States). Department of Chemical Engineering

    2006-10-15

    The unburned carbon content of fly ash from two different power stations was greatly reduced in two-stage laboratory flotation tests by employing a collector consisting of nonylphenol and either hexadecane or fuel oil together with methyl isobutinol (MIBC) as a frother. The tailings from the first stage were re-cleaned in the second stage. This method reduced the carbon content of fly ash from an initial level of 25.9% in one case and 16.5% in another case to a final level of 1-2% or less in the tailings while at the same time recovering 95% or more of the carbon in the floated material or concentrate. In most cases from 60 to 75% of the ash was rejected in the tailings. The results support a previous finding that a good collector for oxidized coal is a good collector for unburned carbon in fly ash. Furthermore, the results showed that much less collector was required to achieve a good separation of carbon from fly ash when MIBC was employed in conjunction with the mixed collector.

  4. Impact of sugar industry fly ash emissions on environment

    International Nuclear Information System (INIS)

    This work was conducted in 1992 to find out the effects and causes of environmental problems due to sugar mills of Sindh. Most of the complaints were received from Nawabshah, Tando Mohammed Khan residential areas where following mills are located, emitting large amounts of fly ash from their chimneys into the atmosphere: (i) Habib Sugar Mills, Nawabshah, (II) Fauji Sugar Mills, Tando Mohammed Khan. Environmental survey of above localities was carried out which reveals that eye-allergy and asthma are the major health effects of fly ash besides the aesthetic problems. Sieve analysis of two fly ash samples viz Fauji Sugar Mills (Old Plant) and Sanghar Sugar Mills (New Plant) showed that the particle size of over 50% of fly ash was above 300 mu m. These large size black particles were unburned carbon particles, which on burning in air gave a weight loss of over 87% at 1000 centi grade. The fly ash analytical results showed that combustion of bagasse in sugar mills was not complete at all and this was not only polluting the atmosphere but also causing energy losses. (author)

  5. MSWI boiler fly ashes: magnetic separation for material recovery.

    Science.gov (United States)

    De Boom, Aurore; Degrez, Marc; Hubaux, Paul; Lucion, Christian

    2011-07-01

    Nowadays, ferrous materials are usually recovered from Municipal Solid Waste Incineration (MSWI) bottom ash by magnetic separation. To our knowledge, such a physical technique has not been applied so far to other MSWI residues. This study focuses thus on the applicability of magnetic separation on boiler fly ashes (BFA). Different types of magnet are used to extract the magnetic particles. We investigate the magnetic particle composition, as well as their leaching behaviour (EN 12457-1 leaching test). The magnetic particles present higher Cr, Fe, Mn and Ni concentration than the non-magnetic (NM) fraction. Magnetic separation does not improve the leachability of the NM fraction. To approximate industrial conditions, magnetic separation is also applied to BFA mixed with water by using a pilot. BFA magnetic separation is economically evaluated. This study globally shows that it is possible to extract some magnetic particles from MSWI boiler fly ashes. However, the magnetic particles only represent from 23 to 120 g/kg of the BFA and, though they are enriched in Fe, are composed of similar elements to the raw ashes. The industrial application of magnetic separation would only be profitable if large amounts of ashes were treated (more than 15 kt/y), and the process should be ideally completed by other recovery methods or advanced treatments. PMID:21306886

  6. ENVIRONMENTAL EVALUATION FOR UTILIZATION OF ASH IN SOIL STABILIZATION

    Energy Technology Data Exchange (ETDEWEB)

    David J. Hassett; Loreal V. Heebink

    2001-08-01

    The Minnesota Pollution Control Agency (MPCA) approved the use of coal ash in soil stabilization, indicating that environmental data needed to be generated. The overall project goal is to evaluate the potential for release of constituents into the environment from ash used in soil stabilization projects. Supporting objectives are: (1) To ensure sample integrity through implementation of a sample collection, preservation, and storage protocol to avoid analyte concentration or loss. (2) To evaluate the potential of each component (ash, soil, water) of the stabilized soil to contribute to environmental release of analytes of interest. (3) To use laboratory leaching methods to evaluate the potential for release of constituents to the environment. (4) To facilitate collection of and to evaluate samples from a field runoff demonstration effort. The results of this study indicated limited mobility of the coal combustion fly ash constituents in laboratory tests and the field runoff samples. The results presented support previous work showing little to negligible impact on water quality. This and past work indicates that soil stabilization is an environmentally beneficial CCB utilization application as encouraged by the U.S. Environmental Protection Agency. This project addressed the regulatory-driven environmental aspect of fly ash use for soil stabilization, but the demonstrated engineering performance and economic advantages also indicate that the use of CCBs in soil stabilization can and should become an accepted engineering option.

  7. ADVANCED POWER SYSTEMS ASH BEHAVIOR IN POWER SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    ZYGARLICKE, CHRISTOPHER J; MCCOLLOR, DONALD P; KAY, JOHN P; SWANSON, MICHAEL L

    1998-09-01

    The overall goal of this initiative is to develop fundamental knowledge of ash behavior in power systems for the purpose of increasing power production efficiency, reducing operation and maintenance costs, and reducing greenhouse gas emissions into the atmosphere. The specific objectives of this initiative focus primarily on ash behavior related to advanced power systems and include the following: Determine the current status of the fundamental ash interactions and deposition formation mechanisms as already reported through previous or ongoing projects at the EERC or in the literature. Determine sintering mechanisms for temperatures and particle compositions that are less well known and remain for the most part undetermined. Identify the relationship between the temperature of critical viscosity (Tcv ) as measured in a viscometer and the crystallization occurring in the melt. Perform a literature search on the use of heated-stage microscopy (HSM) for examining in situ ash-sintering phenomena and then validate the use of HSM in the determination of viscosity in spherical ash particles. Ascertain the formation and stability of specific mineral or amorphous phases in deposits typical of advanced power systems. Evaluate corrosion for alloys being used in supercritical combustion systems.

  8. Damage cost of the Dan River coal ash spill

    International Nuclear Information System (INIS)

    The recent coal ash spill on the Dan River in North Carolina, USA has caused several negative effects on the environment and the public. In this analysis, I report a monetized value for these effects after the first 6 months following the spill. The combined cost of ecological damage, recreational impacts, effects on human health and consumptive use, and esthetic value losses totals $295,485,000. Because the environmental impact and associated economic costs of riverine coal ash spills can be long-term, on the order of years or even decades, this 6-month assessment should be viewed as a short-term preview. The total cumulative damage cost from the Dan River coal ash spill could go much higher. - Highlights: • Six-month post-spill damage cost exceeded $295,000,000. • Components of cost include ecological, recreational, human health, property, and aesthetic values. • Attempts by the electric utility to “clean” the river left over 95% of coal ash behind. • Long-term impacts will likely drive the total damage cost much higher. - Damage costs of the Dan River coal ash spill are extensive and growing. The 6-month cost of that spill is valued at $295,485,000, and the long-term total cost is likely to rise substantially

  9. Bacterial Treatment and Metal Characterization of Biomedical Waste Ash

    Directory of Open Access Journals (Sweden)

    Shelly Heera

    2014-01-01

    Full Text Available Biomedical waste ash generated due to the incineration of biomedical waste contains large amounts of heavy metals and polycyclic aromatic hydrocarbons (PAHs, which is disposed of in regular landfills, and results in unfavorable amounts of hazardous materials seeping into the ground and may pollute surface water and groundwater. Therefore, it is essential to remove the toxicity of ash before disposal into landfills or reutilization. Environmental characteristic analysis of BMW ash showed increased hardness (1320 mg/L and chloride (8500 mg/L content in leachate compared to World Health Organization (WHO and Environment Protection Agency (EPA guidelines for drinking water (hardness, 300 mg/L; chloride, 250 mg/L. The alkalinity and pH of the ash leachate were 400 mg/L and 8.35, respectively. In this paper, study was carried out to investigate the metal tolerance level of bacterial isolates isolated from soil. The isolate Bacillus sp. KGMDI can tolerate up to 75 mg/L of metal concentration (Mn, Mo, Cr, Fe, Cu, and Zn in enriched growth medium. This shows that the isolated culture is capable of growing in presence of high concentration of heavy metals and acts as potential biological tool to reduce the negative impact of BMW ash on the environment during landfilling.

  10. Evaluation and Treatment of Coal Fly Ash for Adsorption Application

    Directory of Open Access Journals (Sweden)

    Samson Oluwaseyi BADA

    Full Text Available Many researchers had investigated fly ash as an adsorbent for the uptake of organic compounds from petrochemical waste effluents. The availability, inexpensive and its adsorption characteristic had made it an alternative media for the removal of organic compounds from aqueous solution. The physical property of South African Coal Fly Ash (SACFA was investigated to determine its adsorption capability and how it can be improved. Chemical treatment using 1M HCl solution in the ratio of (1 g fly ash to (2 ml of acid was used and compared with untreated heat-treated samples. The chemically treated fly ash has a higher specific surface area of 5.4116 m2/g than the heat-treated fly ash with 2.9969 m2/g. More attention had to be given to the utilization of SACFA for the treatment of wastewaters containing organic compounds through the application of Liquid phase adsorption process that was considered as an inexpensive and environmentally friendly technology.

  11. Toxicity mitigation and solidification of municipal solid waste incinerator fly ash using alkaline activated coal ash.

    Science.gov (United States)

    Diaz-Loya, E Ivan; Allouche, Erez N; Eklund, Sven; Joshi, Anupam R; Kupwade-Patil, Kunal

    2012-08-01

    Municipal solid waste (MSW) incineration is a common and effective practice to reduce the volume of solid waste in urban areas. However, the byproduct of this process is a fly ash (IFA), which contains large quantities of toxic contaminants. The purpose of this research study was to analyze the chemical, physical and mechanical behaviors resulting from the gradual introduction of IFA to an alkaline activated coal fly ash (CFA) matrix, as a mean of stabilizing the incinerator ash for use in industrial construction applications, where human exposure potential is limited. IFA and CFA were analyzed via X-ray fluorescence (XRF), X-ray diffraction (XRD) and Inductive coupled plasma (ICP) to obtain a full chemical analysis of the samples, its crystallographic characteristics and a detailed count of the eight heavy metals contemplated in US Title 40 of the Code of Federal Regulations (40 CFR). The particle size distribution of IFA and CFA was also recorded. EPA's Toxicity Characteristic Leaching Procedure (TCLP) was followed to monitor the leachability of the contaminants before and after the activation. Also images obtained via Scanning Electron Microscopy (SEM), before and after the activation, are presented. Concrete made from IFA, CFA and IFA-CFA mixes was subjected to a full mechanical characterization; tests include compressive strength, flexural strength, elastic modulus, Poisson's ratio and setting time. The leachable heavy metal contents (except for Se) were below the maximum allowable limits and in many cases even below the reporting limit. The leachable Chromium was reduced from 0.153 down to 0.0045 mg/L, Arsenic from 0.256 down to 0.132 mg/L, Selenium from 1.05 down to 0.29 mg/L, Silver from 0.011 down to .001 mg/L, Barium from 2.06 down to 0.314 mg/L and Mercury from 0.007 down to 0.001 mg/L. Although the leachable Cd exhibited an increase from 0.49 up to 0.805 mg/L and Pd from 0.002 up to 0.029 mg/L, these were well below the maximum limits of 1.00 and 5

  12. CO2 capture using fly ash from coal fired power plant and applications of CO2-captured fly ash as a mineral admixture for concrete.

    Science.gov (United States)

    Siriruang, Chaichan; Toochinda, Pisanu; Julnipitawong, Parnthep; Tangtermsirikul, Somnuk

    2016-04-01

    The utilization of fly ash as a solid sorbent material for CO2 capture via surface adsorption and carbonation reaction was evaluated as an economically feasible CO2 reduction technique. The results show that fly ash from a coal fired power plant can capture CO2 up to 304.7 μmol/g fly ash, consisting of 2.9 and 301.8 μmol/g fly ash via adsorption and carbonation, respectively. The CO2 adsorption conditions (temperature, pressure, and moisture) can affect CO2 capture performance of fly ash. The carbonation of CO2 with free CaO in fly ashes was evaluated and the results indicated that the reaction consumed most of free CaO in fly ash. The fly ashes after CO2 capture were further used for application as a mineral admixture for concrete. Properties such as water requirement, compressive strength, autoclave expansion, and carbonation depth of mortar and paste specimens using fly ash before and after CO2 capture were tested and compared with material standards. The results show that the expansion of mortar specimens using fly ash after CO2 capture was greatly reduced due to the reduction of free CaO content in the fly ash compared to the expansion of specimens using fresh fly ash. There were no significant differences in the water requirement and compressive strength of specimens using fly ash, before and after CO2 capture process. The results from this study can lead to an alternative CO2 capture technique with doubtless utilization of fly ash after CO2 capture as a mineral admixture for concrete. PMID:26803257

  13. Physiological responses of emerald ash borer larvae to feeding on different ash species reveal putative resistance mechanisms and insect counter-adaptations.

    Science.gov (United States)

    Rigsby, C M; Showalter, D N; Herms, D A; Koch, J L; Bonello, P; Cipollini, D

    2015-07-01

    Emerald ash borer, Agrilus planipennis Fairmaire, an Asian wood-boring beetle, has devastated ash (Fraxinus spp.) trees in North American forests and landscapes since its discovery there in 2002. In this study, we collected living larvae from EAB-resistant Manchurian ash (Fraxinus mandschurica), and susceptible white (Fraxinus americana) and green (Fraxinus pennsylvanica) ash hosts, and quantified the activity and production of selected detoxification, digestive, and antioxidant enzymes. We hypothesized that differences in larval physiology could be used to infer resistance mechanisms of ash. We found no differences in cytochrome P450, glutathione-S-transferase, carboxylesterase, sulfotransferase, and tryptic BApNAase activities between larvae feeding on different hosts. Despite this, Manchurian ash-fed larvae produced a single isozyme of low electrophoretic mobility that was not produced in white or green ash-fed larvae. Additionally, larvae feeding on white and green ash produced two serine protease isozymes of high electrophoretic mobility that were not observed in Manchurian ash-fed larvae. We also found lower activity of β-glucosidase and higher activities of monoamine oxidase, ortho-quinone reductase, catalase, superoxide dismutase, and glutathione reductase in Manchurian ash-fed larvae compared to larvae that had fed on susceptible ash. A single isozyme was detected for both catalase and superoxide dismutase in all larval groups. The activities of the quinone-protective and antioxidant enzymes are consistent with the resistance phenotype of the host species, with the highest activities measured in larvae feeding on resistant Manchurian ash. We conclude that larvae feeding on Manchurian ash could be under quinone and oxidative stress, suggesting these may be potential mechanisms of resistance of Manchurian ash to EAB larvae, and that quinone-protective and antioxidant enzymes are important counter-adaptations of larvae for dealing with these resistance

  14. Considerations on comprehensive risk assessment and mitigation planning of volcanic ash-fall

    International Nuclear Information System (INIS)

    Volcanic ash-fall is inevitable hazard throughout Japan, and causes wide range of effects due to its physical and chemical properties. Nuclear power plants in Japan face the necessity to assess the risk from volcanic ash-fall. Risk assessment of the volcanic ash-fall should include engineering solution and mitigation planning as well as the ash-fall hazard. This report points out the characteristics for reducing the various effects of volcanic ash-fall as follows. Large-scale eruptions produce prominent volcanic ash-falls that can approach power plants at a great distance. Aftermath hazards of ash-fall events, such as remobilization of fine ash particles and generation of lahars, require further assessments. The kind and extent of damages becomes greater whenever ash is wet. Wet ash requires separate assessments in contrast to dry ash. The mitigation and recovery measures at power plants involve quick cleanup operations of volcanic ash. Those operations should be prepared through comprehensive risk assessment, and by cooperation with authorities, during pre-eruption repose period. The comprehensive assessment for volcanic ash-fall hazards, however, has yet to be conducted. Development of risk communication method may result in increased implementation mitigation planning. Numerical analysis of the ash-fall hazards provides quantitative data on particle motions that can be used in the risk assessment. In order to implement the quantitative assessment method, the verification on the effect of ambient air condition to the altitude of volcanic ash cloud is necessary. We need to develop a three-dimensional model of volcanic ash cloud, and calculate motions of ash clouds under multiple conditions of ambient air. (author)

  15. Electrochemical removal of cadmium from bio-ash; Elektrokemisk fjernelse af cadmium fra bioasker

    Energy Technology Data Exchange (ETDEWEB)

    Juul Pedersen, Anne; Ottosen, Lisbeth M.; Simonsen, Peter; Christensen, Terkel C.

    2004-07-01

    The potential of using the method electrodialytic remediation for removal of cadmium from bioashes has been investigated. Five different types of fly ash from biomass combustion were included in the study: 1) A straw combustion fly ash from grate-firing at Avedoere power plant. 2) A fly ash from co-firing of wood and fuel oil at Avedoere power plant. 3) A suspended, grain size fractionated straw fly ash, obtained from PSO project FU 2201, fine and coarse size fraction. The ash was originally produced at Avedoere power plant. 4) A straw pellet fly ash from dust-firing at Amager power plant. Thr five ashes were characterised, and a series of preliminary elekctrodialytic remediation experiments were conducted on each ash. In spite a significant differences between the five ashes with respect to parameters such as pH and content of cadmium, all ashes showed promising remediation potential. For all ashes cadmium concentrations below the regulatory limits for recycling were reached in one or more of the preliminary remediation experiements. The best results were obtained with the suspended straw ash from PSO FU 2201, whereas the results with the wood chips ash, due to a high initial pH value, were less sucessful, meaning that the remediation process was progressing more slowly. (BA)

  16. On stream ash analysis of coal based on its natural gamma-ray activity

    International Nuclear Information System (INIS)

    A novel method based on the natural gamma-ray activity of coal has been developed for the on-stream determination of ash. The accuracy of the method has been verified by measuring the natural gamma-ray activity and ash content of coal samples from a number of locations in New Zealand and Australia. The rms differences between % ash by ignition and % ash by the gamma-ray method ranged from 0.65% ash for coal samples from a Queensland mine to 1.6% ash for samples from a southern New South Wales mine. The rms errors include those to geovariance, and due to sampling and sample analysis by conventional means. The error in ash measurement by the gamma-ray method can therefore be reduced by substantially eliminating these errors. A prototype ash analyser was also developed and field-tested at the Huntly East mine. In a four-week test, the prototype gauge was used to determine the ash content of run-of-mine (rom) coal below 20% ash to within +- 1.7% ash. Laboratory studies of coal samples collected during the field test of the prototype gave an error of 0.8% ash for coal samples below 20% ash content. A higher error was observed in the field test compared with laboratory data, and the difference is attributed to errors in sampling from the conveyor belt

  17. Role of aluminous component of fly ash on the durability of Portland cement-fly ash pastes in marine environment

    International Nuclear Information System (INIS)

    The durability, of mixtures of two kinds of Spanish fly ashes from coal combustion (ASTM class F) with 0, 15 and 35% replacement of Portland cement by fly ash, in a simulated marine environment (Na2SO4+NaCl solution of equivalent concentration to that of sea water: 0.03 and 0.45 M for sulphate and chloride, respectively), has been studied for a period of 90 days. The resistance of the different mixtures to the attack was evaluated by means of the Koch-Steinegger test. The results showed that all the mixtures were resistant, in spite of the great amount of Al2O3 content of the fly ash. The diffusion of SO42-, Na+ and Cl- ions through the pore solution activated the pozzolanic reactivity of the fly ashes causing the corresponding microstructure changes, which were characterized by X-ray diffraction (XRD), mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). As a result, the flexural strength of the mixtures increased, principally for the fly ash of a lower particle size and 35% of addition

  18. Elastic properties of fly ash-stabilized mixes.

    Science.gov (United States)

    Dimter, Sanja; Rukavina, Tatjana; Minažek, Krunoslav

    2015-12-01

    Stabilized mixes are used in the construction of bearing layers in asphalt and concrete pavement structures. Two nondestructive methods: resonant frequency method and ultrasonic pulse velocity method, were used for estimation of elastic properties of fly ash-stabilized mixes. Stabilized mixes were designed containing sand from the river Drava and binder composed of different share of cement and fly ash. The aim of the research was to analyze the relationship between the dynamic modulus of elasticity determined by different nondestructive methods. Data showed that average value of elasticity modulus obtained by the ultrasound velocity method is lower than the values of elasticity modulus obtained by resonant frequency method. For further analysis and enhanced discussion of elastic properties of fly ash stabilized mixes, see Dimter et al. [1]. PMID:26702415

  19. DC Arc Plasma Furnace Melting of Waste Incinerator Fly Ash

    Institute of Scientific and Technical Information of China (English)

    CHEN Mingzhou; MENG Yuedong; SHI Jiabiao; KUANG Jingan; NI Guohua; LIU Wei; JIANG Yiman

    2009-01-01

    Municipal solid waste incinerator (MSWI) fly ash was melted using a set of direct current (DC) arc plasma furnace system for the first time in China.At a feed-rate of flying ash of 80 kg/h,the temperature at the gas outlet was above 1300℃.Dioxins in the off-gas were recorded as 0.029 ng I-TEQ/Nm3 (international toxic equivalent,I-TEQ),well below 0.5 ng TEQ/Nm3 (toxic equivalent,TEQ),while those in the melted product(slag)were 0.00035 ng/g I-TEQ.Molten slag from the furnace showed excellent resistance against the leaching of heavy metals.These results prove that the plasma furnace is effective for the detoxification and stabilization of MSWI fly ash.

  20. Current Methods to Detoxify Fly Ash from Waste Incineration

    Energy Technology Data Exchange (ETDEWEB)

    Hallgren, Christine; Stroemberg, Birgitta [TPS Termiska Processer AB, Nykoeping (Sweden)

    2004-07-01

    Fly ash from waste incineration contains large amounts of heavy metals and dioxins, which will cause a significant disposal problem within the coming years. The amount of fly ash produced in Sweden is currently approximately 60,000 tons/y. New technological options for the decontamination and/or inertization of incinerator fly ash are being developed with the objective of rendering a product that can be reused or, at least, be deposited at standard landfill sites with no risk. Many of these technologies have been tested at industrial scale or in pilot projects. The proposed alternatives include: Thermal treatments; Immobilization/stabilization by cement based techniques; Wet chemical treatments (extractions, immobilizations); Microbiological treatments. Of these, thermal treatments are the most promising solution. Depending on the temperature thermal treatments are classified in two main types: 1) low temperature (below 600 deg C) thermal treatments and 2) high temperature (above 1200 deg C) thermal treatments (vitrification). Most dioxins can be successfully destroyed at temperatures up to 400 deg C under oxygen deficient conditions and at temperatures up to 600 deg C under oxidising conditions. However most heavy metals remain in the fly ash after low temperature treatment. At a temperature of 900 deg C most heavy metals can also be removed in a 10% HCl atmosphere by forming volatile metal chlorides (CT-Fluapur process). During vitrification processes the fly ash melts and forms an inert glassy slag. The product does not leach any significant amount of heavy metals and is free from dioxin. The volume of the fly ash is significantly reduced. The product can be land filled at low costs or used as construction material. The properties of the product depend on the cooling process and on additives such as sand, limestone or waste glass. A series of vitrification methods at industrial size or in pilot scale using different furnaces are studied. Among these, plasma

  1. Microstructural characterization of ashes from Morinda citrifolia L. (Noni)

    International Nuclear Information System (INIS)

    Noni, Morinda citrifolia Linnaeus, is widely used in traditional medicine due to its antibacterial, antiviral, antiparasitic and antifungal properties, preventing the proliferation of tumors and diabetes. This paper presents a study of the elemental and morphological composition of the ashes from the peels, seeds, pulp and leaves of the noni. These ashes are basically amorphous, except those from the annealing of the leaves. The main compounds that have been identified are the CaCO3 (seeds and leaves), CaC2O4 (peels and seeds), KHCO3 (all samples except in leaves), KCl (leaves) and SiO2 (leaves and pulp). Nanoparticles (20 nm) have been observed in all samples except in the ashes of leaves. (author).

  2. MATHEMATICAL MODELING FOR DURABILITY CHARACTERISTICS OF FLY ASH CONCRETE

    Directory of Open Access Journals (Sweden)

    JINO JOHN

    2012-01-01

    Full Text Available This paper presents the results obtained from the mathematical modeling for the durability characteristics of fly ash concrete. A mathematical model is employed to predict the saturated water absorption, permeability, sorpitivity and acid resistance of the concrete containing fly ash as a replacement of cement at a range of 0%, 10%, 20%, 30%, 40% and 50 %. This model is valid for mixes with cement quantity 208 to 416 kg/m3, water cement ratio 0.38 to 0.76, flyash 0 to 208 kg/m3 and cement/ total aggregate ratio varying from 0.11 to 0.22. Fly ash content and water cement ratio are the main parameters which influence the durability characteristics. The predicted mathematical model for saturated water absorption, permeability, sorpitivity and acid resistance produced accurate results for the respective ages when compared with the experimental results.

  3. Microstructural characterization of ashes from Morinda citrifolia L. (Noni)

    International Nuclear Information System (INIS)

    Noni, Morinda citrifolia Linnaeus, is widely used in traditional medicine due to its antibacterial, antiviral, antiparasitic and antifungal properties, preventing the proliferation of tumors and diabetes. This paper presents a study of the elemental and morphological composition of the ashes from the peels, seeds, pulp and leaves of the noni. These ashes are basically amorphous, except those from the roasting of the leaves. The main compounds that have been identified are the CaCO3 (seeds and leaves), CaC2O4 (peels and seeds), KHCO3 (all samples except in leaves), KCl (leaves) and SiO2 (leaves and pulp). Nanoparticles (20 nm) have been observed in all samples except in the ashes of leaves. (orig.)

  4. Stability and leaching of cobalt smelter fly ash

    DEFF Research Database (Denmark)

    Vítková, Martina; Hyks, Jiri; Ettler, Vojtěch;

    2013-01-01

    The leaching behaviour of fly ash from a Co smelter situated in the Zambian Copperbelt was studied as a function of pH (5–12) using the pH-static leaching test (CEN/TS 14997). Various experimental time intervals (48h and 168h) were evaluated. The leaching results were combined with the ORCHESTRA...... elements, the released concentrations were very similar after 48h and 168h, indicating near-equilibrium conditions in the system. Calcite, clinopyroxenes, quartz and amorphous phases predominated in the fly ash. Various metallic sulfides, alloys and the presence of Cu, Co and Zn in silicates and glass were...... release of Pb and Cu. However, there is a high risk of Co, Cu, Pb and Zn mobility in the acidic soils around the smelter facility. Therefore, potential local options for “stabilisation” of the fly ash were evaluated on the basis of the modelling results using the PHREEQC code....

  5. Behaviour of Onobrychis Viciifolia Growing on Fly Ash Experimental Parcels

    Directory of Open Access Journals (Sweden)

    Florica Morariu

    2011-05-01

    Full Text Available Studies were conducted to identify a treatment method for upper layers of fly ash to cover them with vegetation. Fixing plant layer acts against erosion/washes of fly ash deposits. Studies emphasized the need of use of an organic fertilizer mixed with inorganic materials such as volcanic tuff and, also, the need of selecting a plant species compatible with the treated culture medium. The use of an amended variant of compost and modified volcanic tuff of fly ash layers shows that the selected leguminous species, Onobrychis viciifolia, installs itself quickly on the third level of Braun - Blanquet scale. The reduction of toxic heavy metals bioaccumulation from the aerial plant tissues such as lead and nickel of 72-79%, and copper and zinc of 50-68%, respectively, allows obtaining of a safe biomass for wildlife visiting the area.

  6. Municipal solid waste combustor ash demonstration program `the boathouse`

    Energy Technology Data Exchange (ETDEWEB)

    Roethel, F.J.; Breslin, V.T.

    1995-08-01

    The report presents the results of a research program designed to examine the engineering and environmental acceptability of using municipal solid waste (MSW) combustor ash as an aggregate substitute in the manufacture of construction quality cement blocks. 350 tons of MSW combustor ash was combined with Portland and Cement to form standard hollow masonary blocks. These stabilized combustor ash (SCA) blocks were used to construct a boathouse on the campus of the University at Stony Brook. Air samples collected within the boathouse were examined and compared to ambient air samples for the presence and concentrations of suspended particulate, and vapor phase PCDD/PCDF, volatile and semi-volatile organic compounds and volatile mercury. Rainwater samples following contact with the boathouse walls were collected and analyzed for the presence of trace elements. Soil samples were collected prior to and following the construction of the boathouse.

  7. Ash and soil conditioning using exothermic metallic compositions

    International Nuclear Information System (INIS)

    The ash residue obtained after solid radioactive waste incineration is to be conditioned prior to transportation and disposal in order to avoid possible release of radionuclides into the environment. A thermochemical approach to conditioning ash residue that involves the use of exothermic metallic compositions (EMC) has been previously reported. EMC intermixed with ash residue at the appropriate ratios can sustain a glass forming reaction wave that produces monolith glass-like blocks. Herein, the thermochemical conditioning process is extended for conditioning contaminated clay soils. The results are reported for a study of the conditioning process and product materials to determine the optimal processing parameters and to characterize the product materials. Copyright (2001) Material Research Society

  8. The behavior of ash species in suspension fired biomass boilers

    DEFF Research Database (Denmark)

    Jensen, Peter Arendt

    to generate ash particles typically in the size range of 50 to 200 μm on biomass suspension fired power plant boilers. A fragmentation rate of fuel particles of 3 have been used to describe both the residual ash formation process in laboratory entrained flow reactors and in full scale boilers.A range...... coal fly ash with a high content of Si and Al isused as an additive on wood fired plants to reduce the problems with alkali salt de-activationof SCR catalysts. While the fundamental chemistry of the additives are well known detailed reaction models of the interaction of salts and additive particles......While fluid bed and grate fired boilers initially was the choice of boilers used for power production from both wood and herbaceous biomass, in recent years suspension fired boilers have been increasingly used for biomass based power production. In Denmark several large pulverized fuel boilers have...

  9. Performance of Groundnut Husk Ash (GHA - Rice Husk Ash (RHA Modified Concrete in Acidic Environment

    Directory of Open Access Journals (Sweden)

    Egbe-Ngu Ntui Ogork

    2014-11-01

    Full Text Available This paper presents the findings of an investigation on the compressive strength of concrete containing Groundnut Husk Ash (GHA blended with Rice Husk Ash (RHA and its resistance to acid aggression, as well as regression models of the concrete resistance in acidic environment. The GHA and RHA used were obtained by controlled burning of groundnut husk and rice husk, respectively in a kiln to a temperature of 600 oC, and after allowing cooling, sieved through sieve 75 µm and characterized. The compressive strength of GHA-RHAConcrete was investigated at replacement levels of 0, 10, 20, 30 and 40 %, respectively by weight of cement. A total of seventy five 150 mm cubes of GHA-RHA-Concrete grade 20 were tested for compressive strength at 3, 7, 28, 60 and 90 days of curing. Also, thirty 100 mm cubes were exposed to attack from 10 % concentration of diluted solution of sulphuric acid (H2SO4 and nitric acid (HNO3, respectively and the concrete resistance was also modeled using Minitab statistical software to establish regression models. The result of the investigations showed that the compressive strength of the concrete decreased with increase in GHA-RHA content. However 15 % replacement with GHA-RHA was considered as optimum for structural concrete. The use of GHA admixed with 10 % RHA in concrete improved its resistance against sulphuric and nitric acids aggression. The average weight loss of GHA-RHA- concrete after 28 days of exposure in sulphuric acid and nitric acid were 11.6 % and 11.7 %, respectively as opposed to 22.4 % and 15.1 %, respectively for plain Portland cement concrete. The regression models of GHA-RHA-Concrete for resistance against sulphuric and nitric acids were developed with R2 values of 0.668 and 0.655, respectively and were adequate for prediction of the sensitivities of pozzolanic activity of GHA-RHA in acidic environment.

  10. Rice Husk Ash Sandcrete Block as Low Cost Building Material

    Directory of Open Access Journals (Sweden)

    S.P.Sangeetha,

    2016-06-01

    Full Text Available Concrete is a widely used construction material for various types of structures due to its structural stability and strength. The construction industry is today consuming more than 400 million tonnes of concrete every year .Most of the increase in cement demand will be met by the use of supplementary cementing materials, as each ton of Portland cement clinker production is associated with similar amount of CO2 emission, which is a major source of global warming. Partial replacement of ordinary Portland cement with mineral admixtures like fly ash, ground granulated blast furnace slag, silica fume, metakaolin, Rice husk Ash (RHA,etc with plasticizers eliminates these drawbacks. The use of rice husk modifies the physical qualities of fresh cement paste as well as microstructure of paste after hardening. By burning the rice husk under a uncontrolled temperature in the atmosphere, a highly reactive RHA was obtained and the ash was utilized as a supplementary cementing material. This paper presents the effects of using Rice Husk Ash (RHA as a partial cement replacement material in mortar mixes. This work is based on an experimental study of mortar made with replacement of Ordinary Portland Cement (OPC with 10%, 20% 30% & 40% RHA. The properties investigated were the compressive strength, setting time, consistency, workability and specific gravity. Finally, a cost analysis was also done to compare the efficiency of rice husk ash sandcrete blocks. From the test results it can be concluded that rice husk ash can be utilized in day today life of manufacturing building blocks which are more economical and more eco-friendly than the cement concrete blocks which are produced now-a-days.

  11. Ordovician ash geochemistry and the establishment of land plants

    Directory of Open Access Journals (Sweden)

    Parnell John

    2012-08-01

    Full Text Available Abstract The colonization of the terrestrial environment by land plants transformed the planetary surface and its biota, and shifted the balance of Earth’s biomass from the subsurface towards the surface. However there was a long delay between the formation of palaeosols (soils on the land surface and the key stage of plant colonization. The record of palaeosols, and their colonization by fungi and lichens extends well back into the Precambrian. While these early soils provided a potential substrate, they were generally leached of nutrients as part of the weathering process. In contrast, volcanic ash falls provide a geochemically favourable substrate that is both nutrient-rich and has high water retention, making them good hosts to land plants. An anomalously extensive system of volcanic arcs generated unprecedented volumes of lava and volcanic ash (tuff during the Ordovician. The earliest, mid-Ordovician, records of plant spores coincide with these widespread volcanic deposits, suggesting the possibility of a genetic relationship. The ash constituted a global environment of nutrient-laden, water-saturated soil that could be exploited to maximum advantage by the evolving anchoring systems of land plants. The rapid and pervasive inoculation of modern volcanic ash by plant spores, and symbiotic nitrogen-fixing fungi, suggests that the Ordovician ash must have received a substantial load of the earliest spores and their chemistry favoured plant development. In particular, high phosphorus levels in ash were favourable to plant growth. This may have allowed photosynthesizers to diversify and enlarge, and transform the surface of the planet.

  12. Visualizing the Evolution of Eyjafjallajökull Ash Clouds

    Science.gov (United States)

    Realmuto, V. J.; Prata, F.

    2010-12-01

    The closure of European airspace due to Eyjafjallajökull ash clouds provoked strong reactions from the airlines, government officials, travelling public and news media. These reactions underscore the need for effective communication of scientific concepts, data products, and model results. Computer animation techniques are well-suited for the visualization of dynamic three-dimensional phenomena, such as the evolution of Eyjafjallajökull ash clouds over Europe, and a wide variety of animation tools are available to scientists. However, authors have little control over the distribution, modification, and display of animations once they are released to the public. It is incumbent on the scientific community to ensure that the original products strike an optimum balance between scientific accuracy, clarity of message, and artistic license. In this presentation we explore techniques for visualizing changes in the concentrations of ash and height of the Eyjafjallajökull ash clouds on 16 and 17 April 2010. We derived estimates of ash concentration and cloud height from data acquired with the Spinning Enhanced Visible and Infrared Imager (SEVIRI), which flies on the geostationary Meteosat-9 satellite. SEVIRI collects full-disk imagery every 15 minutes; and we used these data to track hourly changes in the composition and heights of the clouds. We compare map-based and volumetric visualizations of the Eyjafjallajökull clouds that portray the changes in the extent and configuration of restricted airspace resulting from changes in the guidelines governing the operations of commercial air traffic within volcanic ash clouds. Based on these comparisons, we evaluate the efficacy of these products for communication with technical and non-technical audiences.

  13. Radon emanation fractions from concretes containing fly ash and metakaolin

    International Nuclear Information System (INIS)

    Radon (222Rn) and progenies emanate from soil and building components and can create an indoor air quality hazard. In this study, nine concrete constituents, including the supplementary cementitious materials (SCMs) fly ash and metakaolin, were used to create eleven different concrete mixtures. We investigated the effect of constituent radium specific activity, radon effective activity and emanation fraction on the concrete emanation fraction and the radon exhalation rate. Given the serious health effects associated with radionuclide exposure, experimental results were coupled with Monte Carlo simulations to demonstrate predictive differences in the indoor radon concentration due to concrete mixture design. The results from this study show that, on average, fly ash constituents possessed radium specific activities ranging from 100 Bq/kg to 200 Bq/kg and emanation fractions ranging from 1.1% to 2.5%. The lowest emitting concrete mixture containing fly ash resulted in a 3.4% reduction in the concrete emanation fraction, owing to the relatively low emanation that exists when fly ash is part of concrete. On average, the metakaolin constituents contained radium specific activities ranging from 67 Bq/kg to 600 Bq/kg and emanation fractions ranging from 8.4% to 15.5%, and changed the total concrete emanation fraction by roughly ± 5% relative to control samples. The results from this study suggest that SCMs can reduce indoor radon exposure from concrete, contingent upon SCM radionucleotide content and emanation fraction. Lastly, the experimental results provide SCM-specific concrete emanation fractions for indoor radon exposure modeling. - Highlights: • Fly ash or metakaolin SCMs can neutralize or reduce concrete emanation fractions. • The specific activity of constituents is a poor predictor of the concrete emanation fraction. • Exhalation from fly ash concretes represents a small fraction of the total indoor radon concentration

  14. TECHNOLOGY AND EFFICIENCY OF PEAT ASH USAGE IN CEMENT CONCRETE

    Directory of Open Access Journals (Sweden)

    G. D. Liakhevich

    2015-05-01

    Full Text Available One of the main ways to improve physical and mechanical properties of cement concrete is an introduction of ash obtained due to burning of fossil fuels into concrete mix. The concrete mixes with ash are characterized by high cohesion, less water gain and disintegration. At the same time the concrete has high strength, density, water resistance, resistance to sulfate corrosion. The aim of this paper is to explore the possibility to use peat ash and slag of peat enterprises of the Republic of Belarus in the concrete for improvement of its physical and mechanical properties and characteristics of peat ash, slag, micro-silica, cement, superplasticizing agent. Compositions and technology for preparation of concrete mixes have been developed and concrete samples have been have been fabricated and tested in the paper. It has been shown that the concrete containing ash, slag obtained due to burning of peat in the industrial installations of the Usiazhsky and Lidsky Peat Briquette Plants and also MK-85-grade micro-silica NSPKSAUsF-1-grade superplasticizing agent have concrete tensile strength within 78–134 MPa under axial compression and 53 MPa – for the control composition. This index is 1.5–2.5 times more than for the sample containing no additives.The usage of peat ash, slag together with MK-85-grade micro-silica and NSPKSAUsF-1-grade superplasticizing agent for fabrication of concrete and reinforced bridge and tunnel structures will provide the following advantages: reduction of cross-sectional area of structures while maintaining their bearing capacity due to higher value of tensile strength in case of axial compression; higher density, waterand gas tightness due to low water cement ratio; high resistance to aggressive environment due to lower content of capillary pores that ensures bridge structure longevity; achievement of environmental and social impacts.

  15. An accelerated data assimilation approach for volcanic ash forecast

    Science.gov (United States)

    Fu, Guangliang; Lin, Haixiang; Heemink, Arnold; Segers, Arjo; Lu, Sha

    2016-04-01

    The 2010 Eyjafjallajökull volcano eruption had serious consequences to civil aviation. This has initiated a lot of research on volcanic ash forecast in recent years. Ensemble-based data assimilation uses the observation data to improve the parameter and state estimation and subsequently the volcanic ash forecast accuracy. Due to the computational complexity of ensemble-based algorithms and the large scale of real-life applications, application of these methods usually introduces a large computational cost, particularly in the analysis step of assimilation processes. Because the other time-consuming part in the single CPU case, the forecast step, can be efficiently and easily parallelized. In this study, we focus on speeding up of the analysis step. For volcanic ash assimilation of aircraft-based measurements, the most time-consuming part in the analysis step has been shown to be the computation of the Kalman gain matrix. After a careful study on the characteristics of ensemble ash states, we propose a model-reduced Kalman gain (MR-Gain) approach which transforms the ensemble state matrix into a low-rank matrix by a multiplication with an index matrix which recorded the sparsity information of the ensemble state matrix, and thus the computational cost of all the ensemble-related matrix multiplications are reduced. After the computation of Kalman gain, using the previously recorded state index, the full analyzed ensemble states are reconstructed. The result shows the MR-Gain approach is exact, which can be used to replace the original full matrix with a much low computation cost. Computer experiments show that the computing time for the analysis step with the new approach is a factor of ten times faster than the conventional analysis step. The result also shows that with the accelerated analysis step in volcanic ash assimilation system, the total amount of computing time for volcanic ash forecast can be significantly reduced by up to a factor of 5.

  16. The use of sugarcane bagasse ash as an alternative local pozzolanic material: study of chemical composition

    International Nuclear Information System (INIS)

    The sugarcane bagasse ash is used as fuel in the boilers of the Kinana sugar factory in Sudan. The field observation and qualitative study of the ash revealed that it consisted of major amounts of carbon and organic materials; this is due to the incomplete combustion of bagasse fibers in boilers. Therefore, it became necessary to recondition the samples for use as pozzolana by re-ashing it. The study of chemical composition of the ash revealed that such byproducts are likely to be pozzolanic. Comparison between chemical compositions of Kinana sugarcane bagasse ash and the pulverized coal fly ashes (ASTM C 618 1999) shows that the composition of bagasse resembles that of Class F Coal Fly Ash, as the total of alumina, silica, and ferric oxide content is about 72 %. It may, behave like Class F Fly Ash, in its engineering properties. (author)

  17. Ash transformation and deposition behavior during co-firing biomass with sewage sludge

    DEFF Research Database (Denmark)

    Wang, Liang; Wu, Hao; Jensen, Peter Arendt;

    In the present work, the ash transformation and deposition behavior during wheat straw and wood waste combustion were investigated by combustion experiments in an entrained flow reactor. The influence of sewage sludge addition on ash chemistry and deposition tendency was also studied. During......-Ca-silicates. The deposits formed on a well-controlled sampling probe are dominated by molten particles rich in K silicates. Over 70% of K in the fly ash is water soluble. The fine fly ash from wood waste combustion consists of mainly KCl and NaCl. Both ash clusters and molten spherical particles are found from the...... ash deposits, which mainly contain K-silicates, K-Al-silicates and K-Ca-silicates. The sewage sludge addition significantly reduced the water soluble K and Na in the fly ash from wheat straw and wood waste combustion. Compared to pure wheat straw and wood waste, the ash deposition rates were increased...

  18. White Fringetree as a Novel Larval Host for Emerald Ash Borer.

    Science.gov (United States)

    Cipollini, Don

    2015-02-01

    Emerald ash borer is an invasive Asian pest of ash species in North America. All North American species of ash tested so far are susceptible to it, but there are no published reports of this insect developing fully in non-ash hosts in the field in North America. I report here evidence that emerald ash borer can attack and complete development in white fringetree, Chionanthus virginicus L., a species native to the southeastern United States that is also planted ornamentally. Four of 20 mature ornamental white fringetrees examined in the Dayton, Ohio area showed external symptoms of emerald ash borer attack, including the presence of adult exit holes, canopy dieback, and bark splitting and other deformities. Removal of bark from one of these trees yielded evidence of at least three generations of usage by emerald ash borer larvae, several actively feeding live larvae, and a dead adult confirmed as emerald ash borer. PMID:26470141

  19. Effects of fly ash on the properties of environmentally friendly dam concrete

    Energy Technology Data Exchange (ETDEWEB)

    Gao Pei-wei; Lu Xiao-lin; Lin Hui; Li Xiaoyan; Hou Jie [Nanjing University of Aeronautics and Astronautics, Nanjing (China). College of Civil Engineering

    2007-05-15

    The utilization of a solid waste - fly ash (FA) in the construction of concrete dams was investigated in this paper, which contained its effects on the strength, shrinkage and expansion strain of dam concrete with and without 8% of a novel MgO-bearing expansive agent. The results are shown a relationship between the content of fly ash replacing cement and the above properties of dam concrete. The compressive strengths of dam concrete with 50% fly ash in 90 d are higher than that of dam concrete with 30% fly ash or without fly ash slightly. Fly ash may decrease the deformation of dam concrete in that with 50% fly ash, and the shrinkage and expansive strain was reduced significantly - about 33% and 40% less than that of the specimens without fly ash respectively. Short communication. 26 refs., 3 figs., 1 tab.

  20. Characterization of Coconut Shell Ash for Potential Utilization in Metal Matrix Composites for Automotive Applications.

    Directory of Open Access Journals (Sweden)

    P.B Madakson

    2012-03-01

    Full Text Available Coconut shell ash is agricultural waste. The waste is produced in abundance globally and poses risk to health as well as environment. Thus their effective, conducive and eco-friendly utilization has always been a challenge for scientific applications. This paper mainly deals with identification of characteristics of coconutshell ash using spectroscopic and microscopic analysis. Density, Particle size, Refractoriness, SEM, XRD,XRF and FTIR spectroscopic methods were used for the characterization of the coconut shell ash. The results were compared and it was observed that the ash possesses nearly same chemical phases and other functional groups as reinforcement like fly ash, rice husk ash, bagasse ash that have been in Metal Matrix Composites (MMCs specifically for automobile applications. Hence, coconut shell ash can be used as a low costreinforcement in Metal Matrix Composites (MMCs.

  1. Chromium removal from tannery wastewater by using of flying ash

    International Nuclear Information System (INIS)

    A simple and economic method to chromium removal from tannery wastewater by means of flying ash is presented. The chromium removal operation is a discontinuous process that involve the mass of flying ash, time of contact and temperature or ph as variables, their which are optimized through Box-Wilson type experimental design. The results were successful: From an initial fluid whit chromium concentration of 1850m ppm, final concentrations of 0.008 ppm and 0.5 ppm of Cr+3 and Cr+6 respectively were achieved. These post-treatment concentrations are into the approved range definite by Government's Laws to this waste type

  2. Recovery of plutonium from incinerator ash at Rocky Flats

    International Nuclear Information System (INIS)

    Incineration of combustible materials highly contaminated with plutonium produces a residue of incinerator ash. Recovery of plutonium from incinerator ash residues at Rocky Flats is accomplished by a continuous leaching operation with nitric acid containing fluoride ion. Special equipment used in the leaching operation consists of a screw feeder, air-lift dissolvers, filters, solids dryer, and vapor collection system. Each equipment item is described in detail. The average dissolution efficiency of plutonium experienced with the process was 68% on the first pass, 74% on the second pass, and 64% on each subsequent pass. Total-solids dissolution efficiencies averaged 47% on the first pass and about 25% on each subsequent pass

  3. Ash reduction system using electrically heated particulate matter filter

    Science.gov (United States)

    Gonze, Eugene V [Pinckney, MI; Paratore, Jr., Michael J; He, Yongsheng [Sterling Heights, MI

    2011-08-16

    A control system for reducing ash comprises a temperature estimator module that estimates a temperature of an electrically heated particulate matter (PM) filter. A temperature and position estimator module estimates a position and temperature of an oxidation wave within the electrically heated PM filter. An ash reduction control module adjusts at least one of exhaust flow, fuel and oxygen levels in the electrically heated PM filter to adjust a position of the oxidation wave within the electrically heated PM filter based on the oxidation wave temperature and position.

  4. Bronchiolitis obliterans from exposure to incinerator fly ash.

    Science.gov (United States)

    Boswell, R T; McCunney, R J

    1995-07-01

    Inhalation of toxic substances in the workplace can result in a variety of respiratory disorders. One relatively rare sequela of the inhalation of toxic fumes is bronchiolitis obliterans, a condition characterized by fibrosis and narrowing of the small airways. Several substances have been reported to cause bronchiolitis obliterans, including ammonia, chlorine, hydrogen fluoride, hydrogen sulfide, nitrogen dioxide, ozone, phosgene, and other irritant fumes. Little has been reported on the pulmonary effects of fly ash produced by the incineration of coal and oil. We report a case of bronchiolitis obliterans with a component of partially reversible airway obstruction in a 39-year-old male occupationally exposed to incinerator fly ash. PMID:7552470

  5. An important form of uranium occurrence in refractory uraniferous ash

    International Nuclear Information System (INIS)

    Four kinds of nondesturctive experimental means, liquid nuclear emuesion microradiography, electron-probe analysis of microrange composition, and X-ray diffraction analysis with Debye camera for single particle and scanning electron-microscopy, are combined into a systematic experimental method for researching small particles of uranium ore. And it is called YDDS method according to the first letters of the Chinese phonetic alphabet of each means' name. The research results about the ash obtained from the first uraniferous lignite processing plant in China using the YDDS method are described. The important form of uranium occurrence in the refractory ash is determined

  6. Properties of Rice Husk Ash Stabilized Laterite Roof Tiles

    OpenAIRE

    Momoh Omuya RAHEEM; Hassan Suleiman OTUOZE; Usman ABDULHAFIZ

    2013-01-01

    This paper presents the results of work on the possibility of using of Rice Husk Ash (RHA) in the production of clay roof tiles. The pozzolana content of the ash was determined using X-Ray Fluorescence (XRF) to confirm the key elements of RHA as a good pozzolanic material. The tiles were produced by moulding clay-RHA blends of various proportions of RHA used in wooden moulds. The percentages by weight of RHA added to various mixes were 0, 5, 10, 15, 20, 25 and 30% RHA and the tiles were fired...

  7. Treatment of MSW fly ashes using the electrodialytic remediation technique

    DEFF Research Database (Denmark)

    Ferreira, Celia; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.

    In the present work the electrodialytic remediation technique is applied for the treatment of fly ash, a hazardous by-product resulting from the incineration of municipal solid waste. Results are presented for an experiment conducted for 40 days at 38 mA, with a continuously stirred cell...... separating chambers III and IV and the dissolution of a large percentage of sample during the treatment. 39% of zinc, 14% of lead, 18% of copper and 60% of cadmium were removed from fly ash using the electrodialytic technique and these results are compared with previously reported experiments on similar...

  8. Treatment of low-level radioactive waste using Volcanic ash

    International Nuclear Information System (INIS)

    The effective application of volcanic ash, an indigenous adsorptive material abundant in the Mt. Pinatubo area, in the removal of radioiodine from radioactive waste streams was demonstrated. Factors such as availability, low cost and comparative retention capacity with respect to activated charcoal make volcanic ash an attractive alternative in the conditioning of radioactive waste containing radioiodine. Chemical precipitation was employed in the treatment of low level aqueous waste containing 137Cs. It was shown that there exists an optimum concentration of ferric ion that promotes maximum precipitation of caesium. It was further demonstrated that complete removal of caesium can be achieved with the addition of nickel hexacyanoferrate. (author). 5 refs, 3 figs

  9. Fly ash: Chemical-physical and mineralogical characterization

    International Nuclear Information System (INIS)

    Fly ash from fossil fuel power plants, municipal waste incinerators and refuse fueled boilers is now being utilized as road construction material. With the aim of facilitating health risk assessments of this practice by providing a sound basis for thorough toxicological examinations, this paper reports on a study in which the crystalline and amorphous constituents of fly ash, according to type of combustion plant and fuel, were identified and analyzed by the use of various analytical techniques which included: scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and absorption, X-ray, and energy loss spectroscopy

  10. Natural radioactivity of coal and fly ash at the Nikola Tesla B TPP

    OpenAIRE

    Kisić Dragica M.; Miletić Saša R.; Radonjić Vladimir D.; Radanović Sanja B.; Filipovic Jelena Z.; Gržetić Ivan A.

    2013-01-01

    Serbian thermal power plants (TPPs) produce siliceous fly ash from lignite in the quantity of approximately 6 million tons per year. The potential market for the use of fly ash is operational, but for the time being, only used by cement producers. Fly ash radioactivity could be one of the major points of concern when larger use of fly ash is planned, particularly in the Serbian construction industry. Radioactivity measurements have been conducted regularly ...

  11. Adsorption of Crystal Violet Dye from Aqueous Solution onto Zeolites from Coal Fly and Bottom Ashes

    OpenAIRE

    Tharcila Colachite Rodrigues Bertolini; Juliana C. Izidoro; Carina P. Magdalena; Denise A. Fungaro

    2013-01-01

    The adsorption of the cationic dye Crystal Violet (CV) over zeolites from coal fly ash (ZFA) and bottom ash (ZBA) was evaluated. The coal fly ash (CFA) and the coal bottom ash (CBA) used in the synthesis of the zeolites by alkaline hydrothermal treatment were collected in Jorge Lacerda coal-fired power plant located at Capivari de Baixo County, in Santa Catarina State, Brazil. The zeolitic materials were characterized predominantly as hydroxy-sodalite and X. The dye adsorption equilibrium was...

  12. Low-level radiation in coals utilized and ashes produced at New York State electric utilities

    International Nuclear Information System (INIS)

    Eight coal-fired power plants in New York State were sampled for coal, fly ash and bottom ash. Samples were analyzed for uranium 238, uranium 235, uranium 234, thorium 232, thorium 230, radium 226, lead 210, polonium 210, radon 222. The leachate of six fly ash samples was analyzed for all of the above except radon 222. Some data on fly ash analysis are included

  13. Preparation, morphology, and thermomechanical properties of coal ash/polyethylene oxide composites

    OpenAIRE

    Saeed, Khalid; Ishaq, Muhammad; Ilyas, Muhammad

    2011-01-01

    Coal ash/polyethylene oxide (ash/PEO) composite films were prepared by the solution casting technique. Scanning electron microscopy (SEM) micrographs indicated that the ash particles were dispersed and embedded well within the polymer matrix. The size of the ash particles in the PEO matrix was less than 3 m m. The polarized optical microscopic (POM) analyses revealed that the pure PEO, upon crystallization, showed distinct crystalline spherulites of a considerable size. The size of...

  14. Restoration of Ecosystems Destroyed by the Fly Ash Dump Using Different Plant Species

    OpenAIRE

    Florica Morariu; Smaranda Mâșu; Benoni Lixandru; Dumitru Popescu

    2013-01-01

    The leguminous plants was studied at experimental variants on fly ash dump: sown species of Onobrichys viciifolia and invasive colonies of Bird's-foot Trefoil (Lotus corniculatus), and yellow sweet (Melilotus officinalis). Six experimental variants were studied in three replicates each: untreated fly ash, fly ash amended with unmodified/modified volcanic rock and fly ash treated with unmodified/modified volcanic rock (indigenous volcanic tuff) mixed with organic fertilizer, anaerobically stab...

  15. PIXE analysis of ashes generated in the incinerator for radioactive waste

    International Nuclear Information System (INIS)

    Ashes generated in the incinerator for radioactive waste at the Kaya Memorial Takizawa Laboratory was analyzed using the PIXE system established at the Nishina Memorial Cyclotron Center. An easy method of sample preparation of ash powder for the PIXE is described. Many elements in the ash sample were detected. The PIXE used in this study is shown to be a very valuable method for analyzing the ash. (author)

  16. The mitigation of power plant ash and slag pond's impact upon the environment

    International Nuclear Information System (INIS)

    The ash and slag ponds have a notable impact upon the environment that starts from the settlement of the yard for the future pond and lasts after the storing capacity runs out. In the case of the active ash ponds the main environmental impacts are due to ash sweeping off by wind and pollution of underground water by the infiltration of the leachate in soil. The main solutions of mitigate the impact of active and abandoned ash ponds are presented. (author) 9 refs

  17. Agglomeration in Stripper Ash Coolers and Its Possible Remedial Solutions: a Case Study

    Science.gov (United States)

    Singh, Ravi Inder

    2016-04-01

    The bottom ash of circulating fluidized bed (CFB) boiler contains large amounts of physical heat. When low quality coals are used in these types of boilers, the ash content is normally more than 40 % and the physical heat loss is approximately 3 % if the bottom ash is discharged without cooling. Bottom ash cooler (BAC) is often used to treat the high temperature bottom ash to reclaim heat, and to facilitate the easily handling and transportation of ash. The CFB boiler at BLA Power, Newari, MP (India) is facing problems of clinker formation in strip ash coolers of plant since the installation of unit. These clinkers are basically agglomerates, which leads to defluidization of stripper ash cooler (BAC) units. There are two strip ash coolers in unit. Each strip ash cooler is capable of working independently. The proper functioning of both strip coolers is very important as it is going to increase the combustion efficiency of boiler by stripping of fine unburnt coal particles from ash, which are injected into the furnace. In this paper causes, characterization of agglomerates, thermo gravimetric analysis of fuel used, particular size distribution of coal and sand and possible remedial solution to overcome these agglomerates in strip ash coolers has also been presented. High temperature in compact separators, non uniform supply of coal and not removing small agglomerates from stripper ash cooler are among main causes of agglomeration in stripper ash cooler. Control of compact separator temperature, replacing 10-12 % of bed material and cleaning stripper ash cooler periodically will decrease agglomeration in stripper ash cooler of unit.

  18. Analysis of Gene Expression in Emerald Ash Borer (Agrilus planipennis) Using Quantitative Real Time-PCR

    OpenAIRE

    Bhandary, Binny; Rajarapu, Swapna Priya; Rivera-Vega, Loren; Mittapalli, Omprakash

    2010-01-01

    Emerald ash borer (EAB, Agrilus planipennis) is an exotic invasive pest, which has killed millions of ash trees (Fraxinus spp) in North America.EAB continues to spread rapidly and attacks ash trees of different ages, from saplings to mature trees. However, to date very little or no molecular knowledge exists for EAB. We are interested in deciphering the molecular-based physiological processes at the tissue level that aid EAB in successful colonization of ash trees. In this report we show the ...

  19. Environmental properties of fly ash from the co-combustion and an environmental quality assurance system

    International Nuclear Information System (INIS)

    The aim of the present research was to characterise the compositional variations of fly ash from co-combustion of peat, wood and biological paper work sludge, environmental acceptability of fly ashes and the correlation of used fuels on ash end-quality. In addition a proposed system for environmental quality assessment of fly ashes was established, including sampling methods for environmental qualification of ashes, assessment criteria for environmental properties of ashes and quality control methods. The combustion cycles related to the research were conducted at a peat-fired power plant utilising forest industrial waste. By varying process conditions and fuel compositions during the combustion cycles the effects on fly ash composition, environmental properties and critical parameters relating to these were established. The environmental acceptability of ashes was primarily assessed through obtained compositional data and results from characteristic leaching tests. The evaluation of environmental acceptability of ashes is based on environmental properties and compositional variations of representative ash samples. It is also very important to identify the parameters influencing ash properties and compositions, such as fuel fractions, prevailing and possibly changing pH-conditions. Ashes from co-combustion are similar to peat and coal fly ashes in terms of composition and leaching properties. The supplementary combustion of sludge did not increase the overall concentration of ashes and did not have an influence on studied leaching properties. The Chromium and Vanadium concentrations were lower in the studied ash samples than those typically found in coal fly ashes. The quality control methods suitable for environmental qualification assessments are also discussed in the present paper. For quality control of leaching tests an example procedure on manufacturing of reference material, characterisation and assessment of leaching properties is presented. Included are

  20. Experimental Study on Durability Improvement of Fly Ash Concrete with Durability Improving Admixture

    OpenAIRE

    Quan, Hong-zhu; Kasami, Hideo

    2014-01-01

    In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete,...

  1. Leaching for recovery of copper from municipal solid waste incineration fly ash: influence of ash properties and metal speciation.

    Science.gov (United States)

    Lassesson, Henric; Fedje, Karin Karlfeldt; Steenari, Britt-Marie

    2014-08-01

    Recovery of metals occurring in significant amounts in municipal solid waste incineration fly ash, such as copper, could offer several advantages: a decreased amount of potentially mobile metal compounds going to landfill, saving of natural resources and a monetary value. A combination of leaching and solvent extraction may constitute a feasible recovery path for metals from municipal solid waste incineration fly ash. However, it has been shown that the initial dissolution and leaching is a limiting step in such a recovery process. The work described in this article was focused on elucidating physical and chemical differences between two ash samples with the aim of explaining the differences in copper release from these samples in two leaching methods. The results showed that the chemical speciation is an important factor affecting the release of copper. The occurrence of copper as phosphate or silicate will hinder leaching, while sulphate and chloride will facilitate leaching. PMID:25106538

  2. Effect of Bagasse ash reinforcement on the wear behaviour of Al-Cu-Mg/Bagasse ash particulate composites

    Institute of Scientific and Technical Information of China (English)

    V.S.; Aigbodion; S.B.; Hassan; G.B.; Nyior; T.; Ause

    2010-01-01

    The effect of Bagasse ash(BAp) particle reinforcement on the wear behavior of Al-CuMg alloy has been studied.Bagasse ash particles were varied from 0 wt pct-10 wt pct with interval of 2 wt pct.Unlubricated pin-on disc tests were conducted to examine the wear behaviour of the aluminium alloy/Bagasse ash particulate composites.The tests were conducted at varying loads,from 5 to 20 N and sliding speeds of 1.26 m/s,2.51 m/s,3.77 m/s and 5.02 m/s for a constant sliding distance of 5000 m.The results showed that ...

  3. Volcanic controls on ash iron solubility: thermodynamic modeling of gas-ash interaction in the hot core of volcanic plumes

    Science.gov (United States)

    Hoshyaripour, G.; Hort, M.; Langmann, B.

    2012-04-01

    Recently it has been shown that volcanic ash can act as a fertilizer for phytoplankton bloom by injecting bio-available iron into the surface ocean. However, it is also well known that iron in volcanic ash at least at its generation point (i.e. magma) is mostly in insoluble form, i.e. not bio-available. Although different volcanic and atmospheric processes are assumed to contribute to the transformation of insoluble iron into soluble salts, the causes of iron mobilization in volcanic ash are poorly constrained. Here we explore the volcanic control on the mobilization of iron in volcanic ash in the hot core of volcanic plumes (T>600° C) based on thermodynamic equilibrium considerations. A conceptual box model is considered for the hot core in which 1000° C magmatic gas, ash and 25° C ambient air are mixed. The initial composition of volcanic gas and ash are parameterized based on three types of tectonic settings (convergent plate, divergent plate, and hot spot) and basaltic to rhyolitic magmas. The effect of the initial oxidation state is also considered by changing the oxygen fugacity. First, magmatic oxides (i.e. SiO2, FeO, MgO etc) are titrated into the magmatic gas at constant temperature and fugacity in order to generate the initial iron carrying minerals. Since the alteration of ash composition is mainly diffusion controlled, we assume that inside the hot core of the volcanic plume the Fe speciation is only affected at or near to the ash surface. Results show that the main initial iron carrying minerals are usually ilmenite and fayalite with some addition of pyhrrotite at reduced conditions in divergent plate and hot spot settings. Then the 1000° C magmatic gas-ash mixture is mixed with the 25° C air (N2 79%, O2 21%) until a temperature of 600° C is reached. Results demonstrate that the hot core functions as an oxidizing reactor for the ash surface transforming the whole Fe2+ minerals to Fe3+ species while being cooled to 600° C. However, in reduced

  4. The relation between pre-eruptive bubble size distribution, ash particle morphology, and their internal density: Implications to volcanic ash transport and dispersion models

    Science.gov (United States)

    Proussevitch, Alexander

    2014-05-01

    Parameterization of volcanic ash transport and dispersion (VATD) models strongly depends on particle morphology and their internal properties. Shape of ash particles affects terminal fall velocities (TFV) and, mostly, dispersion. Internal density combined with particle size has a very strong impact on TFV and ultimately on the rate of ash cloud thinning and particle sedimentation on the ground. Unlike other parameters, internal particle density cannot be measured directly because of the micron scale sizes of fine ash particles, but we demonstrate that it varies greatly depending on the particle size. Small simple type ash particles (fragments of bubble walls, 5-20 micron size) do not contain whole large magmatic bubbles inside and their internal density is almost the same as that of volcanic glass matrix. On the other side, the larger compound type ash particles (>40 microns for silicic fine ashes) always contain some bubbles or the whole spectra of bubble size distribution (BSD), i.e. bubbles of all sizes, bringing their internal density down as compared to simple ash. So, density of the larger ash particles is a function of the void fraction inside them (magmatic bubbles) which, in turn, is controlled by BSD. Volcanic ash is a product of the fragmentation of magmatic foam formed by pre-eruptive bubble population and characterized by BSD. The latter can now be measured from bubble imprints on ash particle surfaces using stereo-scanning electron microscopy (SSEM) and BubbleMaker software developed at UNH, or using traditional high-resolution X-Ray tomography. In this work we present the mathematical and statistical formulation for this problem connecting internal ash density with particle size and BSD, and demonstrate how the TFV of the ash population is affected by variation of particle density.

  5. Ash characteristics and plant nutrients in some aquatic biomasses

    Science.gov (United States)

    Masto, Reginald; Pandit, Ankita; George, Joshy; Mukhopadhyay, Sangeeta; Selvi, Vetrivel; Ram, Lal

    2016-04-01

    Aquatic biomasses are explored as potential fuel source for direct combustion because of their faster growth and no land requirement. The energy density and the ash characteristics of the aquatic biomasses are to be evaluated for their suitability for energy extraction. In the study, four aquatic plant samples namely Eichornia crassipes, Hydrilla verticilleta, Lemna minor, Spirogyra spp were collected from a pond in Digwadih Campus of Central Institute of Mining and Fuel Research, Dhanbad. The biomasses were air dried, powdered and ashed at different temperatures. Volatile C was relatively lower in Spirogyra and Hydrilla (53 %) than Eichornia (62.6 %) or Lemna (59.7 %), whereas fixed C was higher for Eichornia and Lemna (about 10 %) and lower for Hydrilla (1 %). Ultimate analysis showed that the carbon content was in the order Eichornia > Lemna > Spirogyra > Hydrilla. The IR spectra of each raw biomass is compared to their respective ashes obtained at different temperatures (500-900°C). With increase in ashing temperature from 500-900°C there is gradual breakdown of the cellulosic structure hence, peaks around 2900-2800cm-1 caused by aliphatic C-H vibration tends to disappear slowly in ash. More number of peaks appears at lower wavenumbers in ashes of all the biomass samples indicating towards increased percentage of inorganic ion species. Considerable enrichment of SiO2 is validated with prominent peaks at 1100-900 cm-1 in all the ashes. Lemna and Spirogyra has a similar ash composition (Si > Al > Ca > K), whereas, Ca was higher in Hydrilla (Si > Ca > K > Al). Eichornia (Si > K > Ca > Al) has higher K and Ca than Al. SiO2 and Al2O3 were higher in Spirogyra, while SiO2 and CaO in Eichornia and Hydrilla. K first increased from 500-700/800⁰C, and then decreased from 800-900⁰C. Cl is lost slowly in ash from 500-700/800⁰C and then by a drastic reduction from 800-900⁰C. S is enhanced in ash at all temperatures although the change is quite small. Most of the Cl

  6. Cleanup Verification Package for the 126-F-1, 184-F Powerhouse Ash Pit

    Energy Technology Data Exchange (ETDEWEB)

    S. W. Clark and H. M Sulloway

    2007-10-31

    This cleanup verification package documents completion of remedial action for the 126-F-1, 184-F Powerhouse Ash Pit. This waste site received coal ash from the 100-F Area coal-fired steam plant. Leakage of process effluent from the 116-F-14 , 107-F Retention Basins flowed south into the ash pit, contaminating the northern portion.

  7. Cleanup Verification Package for the 126-F-1, 184-F Powerhouse Ash Pit

    International Nuclear Information System (INIS)

    This cleanup verification package documents completion of remedial action for the 126-F-1, 184-F Powerhouse Ash Pit. This waste site received coal ash from the 100-F Area coal-fired steam plant. Leakage of process effluent from the 116-F-14 , 107-F Retention Basins flowed south into the ash pit, contaminating the northern portion

  8. Fly Ash Admixture and its Influence on Alitic Type Cement Concrete Permeability

    OpenAIRE

    Rujanu, Mircea; Rujanu, Bogdan

    2012-01-01

    Experimental and theoretical studies pointed that adding fly ash in concrete composition, could favour its impermeability characteristic improvement. It is known, also, that fly ash admixture achieves cement dosage reduction, so that concrete will be cheaper, and in this conditions it is important to analyse fly ash admixture influence on impermeability degree, too.

  9. Assessing Risk Posed By Land Application Of Ash From The Combustion Of Wood And Tires

    Science.gov (United States)

    The total and leachable metal concentrations in ash from the combustion of waste wood and vehicle tires (WT ash) were characterized. These data were then used to examine a variety of issues associated with determining whether the WT ash could be beneficially used outside of a la...

  10. 75 FR 29189 - Emerald Ash Borer; Addition of Quarantined Areas in Kentucky, Michigan, Minnesota, New York...

    Science.gov (United States)

    2010-05-25

    ...: Background The emerald ash borer (EAB) (Agrilus planipennis) is a destructive wood-boring insect that attacks... Animal and Plant Health Inspection Service 7 CFR Part 301 Emerald Ash Borer; Addition of Quarantined...: We are amending the emerald ash borer regulations by adding portions of Kentucky, Michigan,...

  11. File list: Oth.ALL.05.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.ALL.05.ash1.AllCell dm3 TFs and others ash1 All cell types SRX084580,SRX128300,...SRX128301,SRX084579 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.ALL.05.ash1.AllCell.bed ...

  12. File list: Oth.ALL.05.ash-2.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.ALL.05.ash-2.AllCell ce10 TFs and others ash-2 All cell types SRX495091,SRX4950...92,SRX494917 http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/assembled/Oth.ALL.05.ash-2.AllCell.bed ...

  13. File list: Oth.ALL.20.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.ALL.20.ash1.AllCell dm3 TFs and others ash1 All cell types SRX128301,SRX084579,...SRX084580,SRX128300 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.ALL.20.ash1.AllCell.bed ...

  14. 75 FR 55846 - Public Meeting/Working Group With Industry on Volcanic Ash

    Science.gov (United States)

    2010-09-14

    ... Federal Aviation Administration Public Meeting/Working Group With Industry on Volcanic Ash AGENCY: Federal... Atmospheric Administration (NOAA). The meeting is to identify operational needs for Volcanic Ash information... forecasting of volcanic eruptions and the associated ash cloud. It has been well documented that volcanic...

  15. File list: Oth.CeL.05.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CeL.05.ash1.AllCell dm3 TFs and others ash1 Cell line SRX084580,SRX128300,SRX12...8301,SRX084579 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.CeL.05.ash1.AllCell.bed ...

  16. File list: Oth.ALL.50.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.ALL.50.ash1.AllCell dm3 TFs and others ash1 All cell types SRX128301,SRX084579,...SRX084580,SRX128300 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.ALL.50.ash1.AllCell.bed ...

  17. File list: Oth.CeL.20.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CeL.20.ash1.AllCell dm3 TFs and others ash1 Cell line SRX128301,SRX084579,SRX08...4580,SRX128300 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.CeL.20.ash1.AllCell.bed ...

  18. File list: Oth.ALL.10.ash-2.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.ALL.10.ash-2.AllCell ce10 TFs and others ash-2 All cell types SRX495091,SRX4950...92,SRX494917 http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/assembled/Oth.ALL.10.ash-2.AllCell.bed ...

  19. File list: Oth.CeL.10.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CeL.10.ash1.AllCell dm3 TFs and others ash1 Cell line SRX128300,SRX084580,SRX08...4579,SRX128301 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.CeL.10.ash1.AllCell.bed ...

  20. File list: Oth.ALL.10.ash1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.ALL.10.ash1.AllCell dm3 TFs and others ash1 All cell types SRX128300,SRX084580,...SRX084579,SRX128301 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.ALL.10.ash1.AllCell.bed ...