Sample records for ash fraxinus excelsior

  1. CharacteristicofConsortiveRelations of Birds with the European Ash (Fraxinus excelsior

    Directory of Open Access Journals (Sweden)

    O. L. Ponomarenko


    Full Text Available The article is devoted to the consortia interactions of birds with the ash (Fraxinus excelsior L. in its ontogeny from v  to g 2 3 age stage. Species composition, daily time budget, daily mass budget of the birds in ash consortia were studied.

  2. A review of European ash (Fraxinus excelsior L.): implications for silviculture

    NARCIS (Netherlands)

    Dobrowolska, D.; Hein, S.; Oosterbaan, A.; Wagner, S.; Clark, J.; Skovsgaard, J.P.


    European ash (Fraxinus excelsior L.) is common throughout much of Europe and is a valuable broadleaved tree due to its ecological characteristics, outstanding wood properties and high economic value. It is a fast growing species, associated with several forest types and with a scattered distribution

  3. Geschikte herkomsten Fraxinus excelsior voor Nederland

    NARCIS (Netherlands)

    Buiteveld, J.; Vries, de S.M.G.


    Onderzoek naar geschikte herkomsten van Fraxinus excelsior voor aanplant in Nederland. Dit artikel is een uitgebreide samenvatting van Alterra-rapport 929, 'Herkomst- en nakomelingschaponderzoek van es (Fraxinus excelsior)

  4. Ethylenediurea (EDU) affects the growth of ozone-sensitive and tolerant ash (Fraxinus excelsior) trees under ambient O3 conditions. (United States)

    Paoletti, Elena; Contran, Nicla; Manning, William J; Tagliaferro, Francesco


    Adult ash trees (Fraxinus excelsior L.), known to be sensitive or tolerant to ozone, determined by presence or absence of foliar symptoms in previous years, were treated with ethylenediurea (EDU) at 450 ppm by gravitational trunk infusion over the 2005 growing season (32.5 ppm h AOT40). Tree and shoot growth were recorded in May and September. Leaf area, ectomycorrhizal infection, and leaf and fine root biomass were determined in September. EDU enhanced shoot length and diameter, and the number and area of leaves, in both O3-sensitive and tolerant trees. However, no EDU effects were recorded at the fine root and tree level. Therefore, a potential for EDU protection against O3-caused growth losses of forest trees should be evaluated during longer-term experiments.

  5. The Effects of Surface Roughness on Adhesion Strength of Coated Ash (Fraxinus excelsior L. and Birch (Betula L. Wood

    Directory of Open Access Journals (Sweden)

    Justina VITOSYTĖ


    Full Text Available For the evaluation of surface roughness impact on adhesion properties, the samples of dried ash (Fraxinus excelsior L. and birch (Betula L. wood were used. Before wood finishing, the surfaces of the samples were sanded. In order to get different surface roughness the abrasive material of P80, P120, P150, P180, P220 and P240 grit was used. The parameters of surface roughness Ra, Rz and Rmax were measured in three directions: along the wood grain, across the grain and in the angle of 45º. Comparison of the results showed the non-linear dependency of roughness parameters. Afterwards the wood surface was coated with three different acrylic-polyurethane coating systems (1 layer of varnish without primer, 1 layer of primer and 1 layer of varnish, and 1 layer of primer and 2 layers of varnish. The adhesion strength was assessed using the pull-off method. Also the nature of the fracture was evaluated. It was determined that the peculiarities of surface roughness, coating system type and wood species signally results the values of the adhesion strength.DOI:

  6. Transport of soluble carbohydrates in temperate deciduous trees: beech (Fagus sylvatica) and ash (Fraxinus excelsior) in comparison (United States)

    Thoms, Ronny; Köhler, Michael; Gessler, Arthur; Gleixner, Gerd


    The structure of phloem cells and the physiology of the transport of soluble carbohydrates in plants are well studied. However, the influence of different phloem un- and uploading strategies on the translocation of carbohydrates in different tree species is largely unknown. Therefore, we conducted a pulse labeling on 20 young trees of European beech (Fagus sylvatica) and European ash (Fraxinus excelsior) respectively, using the stable isotope 13C in a temperate deciduous forest in Central Germany. In one growing season each tree species was labeled in a closed transparent plastic chamber with 99% 13CO2 for 5 h. The compound specific δ 13C from carbohydrates in the different compartments leaf, branch, stem and root was measured by high-performance liquid chromatography linked with an isotope ratio mass spectrometer (HPLC-IRMS). We found that both tree species used sucrose as a transport sugar, but carbohydrates of the raffinose group (RFO) served as main transport sugar in ash trees. This indicate that beech used only the apoplastic loading strategy into the phloem cells while ash trees relied on both, apoplastic and symplastic loading, preferring the latter at the end of the growing season. Furthermore, we observed different transport velocities of labeled sugars in the two species. Here, sucrose in beech and carbohydrates of the RFO in ash were transported fastest, whereas sucrose was constantly slowest in ash trees. The label of carbohydrates was found over 60 day in the roots of both tree species, with the highest δ 13C enrichment in carbohydrates of RFO than in the other sugars. Accordingly, the mean residence time (MRT) and half life time (HLT) of 13C in different compartments were longest for carbohydrates of RFO in roots (25.6 days) and sucrose in stems (14.9 days), while the shortest MRT and HLT for sucrose appeared in beech in all compartments. Our results give evidence that RFO are preferentially transported to the root tissue as an agent against frost

  7. Molecular markers for tolerance of European ash (Fraxinus excelsior) to dieback disease identified using Associative Transcriptomics

    DEFF Research Database (Denmark)

    Harper, Andrea L.; McKinney, Lea Vig; Nielsen, Lene Rostgaard;


    is being devastated by the fungal pathogen Hymenoscyphus fraxineus, which causes ash dieback disease. Taking this system as an example and utilizing Associative Transcriptomics for the first time in a plant pathology study, we discovered gene sequence and gene expression variants across a genetic diversity...... panel scored for disease symptoms and identified markers strongly associated with canopy damage in infected trees. Using these markers we predicted phenotypes in a test panel of unrelated trees, successfully identifying individuals with a low level of susceptibility to the disease. Co...

  8. Protection of ash (Fraxinus excelsior) trees from ozone injury by ethylenediurea (EDU): roles of biochemical changes and decreased stomatal conductance in enhancement of growth. (United States)

    Paoletti, Elena; Contran, Nicla; Manning, William J; Castagna, Antonella; Ranieri, Annamaria; Tagliaferro, Francesco


    Treatments with ethylenediurea (EDU) protect plants from ozone foliar injury, but the processes underlying this protection are poorly understood. Adult ash trees (Fraxinus excelsior), with or without foliar ozone symptoms in previous years, were treated with EDU at 450 ppm by gravitational trunk infusion in May-September 2005 (32.5 ppm h AOT40). At 30-day intervals, shoot growth, gas exchange, chlorophyll a fluorescence, and water potential were determined. In September, several biochemical parameters were measured. The protective influence of EDU was supported by enhancement in the number of leaflets. EDU did not contribute its nitrogen to leaf tissue as a fertiliser, as determined from lack of difference in foliar N between treatments. Both biochemical (increase in ascorbate-peroxidase and ascorbic acid, and decrease in apoplastic hydrogen peroxide) and biophysical (decrease in stomatal conductance) processes regulated EDU action. As total ascorbic acid increased only in the asymptomatic trees, its role in alleviating O(3) effects on leaf growth and visible injury is controversial.

  9. Looking beyond sugars: phytochemical profiling and standardization of manna exudates from Sicilian Fraxinus excelsior L. (United States)

    Caligiani, Augusta; Tonelli, Letizia; Palla, Gerardo; Marseglia, Angela; Rossi, Damiano; Bruni, Renato


    Different grades of genuine and counterfeit Fraxinus excelsior exudates, marketed as natural sweeteners or mild laxatives, were evaluated for their proximate composition and for saccharidic, organic acids, lipidic and phenolic profile by means of GC-MS and (1)H NMR. Genuine samples contained mannitol (39-48 g/100 g, according to the grade), fructose (9-16 g/100 g), glucose (2-3.7 g/100 g), sorbitol (0,5-0,6 g/100 g), galactose (0.02-0.74 g/100 g), oligosaccharides as mannotriose (13-22 g/100 g) and stachyose (1-11 g/100 g), and traces of myo-inositol, mannose, sucrose. On the contrary, counterfeit samples contained mostly mannitol and sorbitol, with traces of fructose, glucose and mannose. Differences in ash, total polyphenolic content and fatty acid composition allowed a quick identification of counterfeit products, confirmed by a distinct mono-, oligosaccharidic and phenolic pattern. Elenolic acid (63-1628 mg/kg), tyrosol (15-774 mg/kg), homovanillic acid (2,39-52.8 mg/Kg), dopaol (0.8-63 mg/kg), pinoresinol (4.2-18.5 mg/kg) and fraxetin (0.25-11.64 mg/kg), albeit showing a wide concentration range, were the most abundant substances detected in the phenolic fraction of Fraxinus manna, while esculetin, p-hydroxybenzoic acid, 4-hydroxyphenacetic acid, 3,4 hydroxybenzoic acid, hydroxy-pinoresinol, medioresinol and siringaresinol were present in low amounts. The polyphenolic profile may be used as a marker for authentication and should be considered in the evaluation of nutritional and health properties ascribed to Fraxinus manna.

  10. Variation of equilibrium moisture content of heat-treated Couratari oblongifolia, Fraxinus excelsior, and Quercus rubra wood

    Directory of Open Access Journals (Sweden)

    Qiaofang Zhou


    Full Text Available Heat treatment may result in variation of wood equilibrium moisture content (EMC. During this study, tauari (Couratari oblongifolia, ash (Fraxinus excelsior, and oak (Quercus rubra woods were heat-treated at 190, 200, and 210ºC for 3 hours and then put into a conditioning chamber with a temperature from 30 to 75ºC and a relative humidity from 50 to 90%. The isothermal moisture adsorption curve was subsequently analyzed. Results indicated that the EMC of heat-treated wood was reduced by 23.4 to 37.4% compared to non-treated wood, but the EMC difference at different heat-treated temperatures for three hardwoods was quite small and the EMC of heat-treated wood was inversely proportional to their dry density.

  11. Transcriptomic signatures of ash (Fraxinus spp. phloem.

    Directory of Open Access Journals (Sweden)

    Xiaodong Bai

    Full Text Available BACKGROUND: Ash (Fraxinus spp. is a dominant tree species throughout urban and forested landscapes of North America (NA. The rapid invasion of NA by emerald ash borer (Agrilus planipennis, a wood-boring beetle endemic to Eastern Asia, has resulted in the death of millions of ash trees and threatens billions more. Larvae feed primarily on phloem tissue, which girdles and kills the tree. While NA ash species including black (F. nigra, green (F. pennsylvannica and white (F. americana are highly susceptible, the Asian species Manchurian ash (F. mandshurica is resistant to A. planipennis perhaps due to their co-evolutionary history. Little is known about the molecular genetics of ash. Hence, we undertook a functional genomics approach to identify the repertoire of genes expressed in ash phloem. METHODOLOGY AND PRINCIPAL FINDINGS: Using 454 pyrosequencing we obtained 58,673 high quality ash sequences from pooled phloem samples of green, white, black, blue and Manchurian ash. Intriguingly, 45% of the deduced proteins were not significantly similar to any sequences in the GenBank non-redundant database. KEGG analysis of the ash sequences revealed a high occurrence of defense related genes. Expression analysis of early regulators potentially involved in plant defense (i.e. transcription factors, calcium dependent protein kinases and a lipoxygenase 3 revealed higher mRNA levels in resistant ash compared to susceptible ash species. Lastly, we predicted a total of 1,272 single nucleotide polymorphisms and 980 microsatellite loci, among which seven microsatellite loci showed polymorphism between different ash species. CONCLUSIONS AND SIGNIFICANCE: The current transcriptomic data provide an invaluable resource for understanding the genetic make-up of ash phloem, the target tissue of A. planipennis. These data along with future functional studies could lead to the identification/characterization of defense genes involved in resistance of ash to A. planipennis

  12. Comparison of the soil carbon and nitrogen contents of Quercus cerris and Fraxinus excelsior in the Mersin-Gulnar region

    Directory of Open Access Journals (Sweden)

    Burcu Yesilbudak


    Full Text Available Background: Soil samples were taken from a depth of 0-10 cm under the Quercus cerris and Fraxinus excelsior at an altitude of 1300-1500 m from the Kullin site at Gulnar-Mersin and were compared for their pH, CaCO3, nitrogen (N %, and carbon (C % contents. Balanced soils in natural forest ecosystems are known to be very rich in carbon content which increases with latitude and altitude and that the C/N ratio varies greatly between the soils of different plant species. We determined the values of the C/N rates in Q. cerris and F. excelsior soils of the Gulnar Gezende forest for the first time at this altitude. Material and Methods: A pH meter and Scheibler calcimeter were used to determine the soil pH and lime contents respectively. Percentage C was determined using the Anne method and the N% with the Kjeldahl method. Results: There was no difference in the pH values and nitrogen percentage contents between the two soils. Q. cerris soil was found to have medium levels of CaCO3, while the level of CaCO3 in F. excelsior soils was low. The C/N rates and carbon contents were higher in Q. cerris soil than F. excelsior soil (P<0.05. Conclusions: The higher carbon content of Q. cerris soil can be explained by higher amounts of organic matter compared with F. excelsior, which might depend on factors such as microclimate and their specific characteristics.

  13. Characterization, localization, and seasonal changes of the sucrose transporter FeSUT1 in the phloem of Fraxinus excelsior. (United States)

    Öner-Sieben, Soner; Rappl, Christine; Sauer, Norbert; Stadler, Ruth; Lohaus, Gertrud


    Trees are generally assumed to be symplastic phloem loaders. A typical feature for most wooden species is an open minor vein structure with symplastic connections between mesophyll cells and phloem cells, which allow sucrose to move cell-to-cell through the plasmodesmata into the phloem. Fraxinus excelsior (Oleaceae) also translocates raffinose family oligosaccharides in addition to sucrose. Sucrose concentration was recently shown to be higher in the phloem sap than in the mesophyll cells. This suggests the involvement of apoplastic steps and the activity of sucrose transporters in addition to symplastic phloem-loading processes. In this study, the sucrose transporter FeSUT1 from F. excelsior was analysed. Heterologous expression in baker's yeast showed that FeSUT1 mediates the uptake of sucrose. Immunohistochemical analyses revealed that FeSUT1 was exclusively located in phloem cells of minor veins and in the transport phloem of F. excelsior. Further characterization identified these cells as sieve elements and possibly ordinary companion cells but not as intermediary cells. The localization and expression pattern point towards functions of FeSUT1 in phloem loading of sucrose as well as in sucrose retrieval. FeSUT1 is most likely responsible for the observed sucrose gradient between mesophyll and phloem. The elevated expression level of FeSUT1 indicated an increased apoplastic carbon export activity from the leaves during spring and late autumn. It is hypothesized that the importance of apoplastic loading is high under low-sucrose conditions and that the availability of two different phloem-loading mechanisms confers advantages for temperate woody species like F. excelsior.

  14. Microwave-assisted green synthesis of silver nanoparticles from Fraxinus excelsior leaf extract and its antioxidant assay (United States)

    Parveen, Mehtab; Ahmad, Faheem; Malla, Ali Mohammed; Azaz, Shaista


    The biosynthesis of nanoparticles has been proposed as a cost effective and environmentally benevolent alternative to chemical and physical methods. In the present study, microwave assisted synthesis of silver nanoparticles (AgNPs) has been demonstrated using leaf extract of Fraxinus excelsior reducing aqueous AgNO3 solution. The synthesized nanoparticles have been characterized on the basis of fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) analysis. The presence of a characteristic surface plasmon resonance (SPR) absorption band at 425 nm in UV-Vis reveals the reduction of silver metal ions into silver nanoparticles. FT-IR analysis was carried out to probe the possible functional group involved in the synthesis of AgNPs. Further leaf extracts and AgNPs were evaluated for antiradical scavenging activity by 1,1-diphenyl-2-picryl-hydrazyl (DPPH) assay.

  15. Removal and recovery of heavy metals from aqueous solution using Ulmus carpinifolia and Fraxinus excelsior tree leaves. (United States)

    Sangi, Mohammad Reza; Shahmoradi, Ali; Zolgharnein, Javad; Azimi, Gholam Hassan; Ghorbandoost, Morteza


    Ulmus carpinifolia and Fraxinus excelsior tree leaves, which are in great supply in Iran, were evaluated for removal of Pb(II), Cd(II) and Cu(II) from aqueous solution. Maximum biosorption capacities for U. carpinifolia and F. excelsior were measured as 201.1, 172.0 mg/g for Pb(II), 80.0, 67.2 mg/g for Cd(II) and 69.5, 33.1 mg/g for Cu(II), respectively. For both sorbents the most effective pH range was found to be 2-5 for Pb(II), 3-5 for Cd(II) and 4-5 for Cu(II). Metal ion biosorption increased as the ratio of metal solution to the biomass quantity decreased. Conversely, biosorption/g biosorbent decreased as the quantity of biomass increased. The biosorption of metal ions increased as the initial metal concentration increased. Biosorption capacities of metal ions were in the following order: Pb(II)>Cd(II)>Cu(II). The equilibrium data for Pb(II) and Cu(II) best fit the Langmuir adsorption isotherm model. Kinetic studies showed that the biosorption rates could be described by a second-order expression. Both the sorbents could be regenerated using 0.2 M HCl during repeated biosorption-desorption cycles with no loss in the efficiency of the Cu(II) removal observed. Biosorption of Pb(II), Cd(II) and Cu(II) was investigated in the presence of Na, K, Mg and Ca ions. The results from these studies show a novel way of using U. carpinifolia and F. excelsior tree leaves to remove Pb(II), Cd(II) and Cu(II) from metal-polluted waters.

  16. Growth and form of Quercus robur and Fraxinus excelsior respond distinctly different to initial growing space: results from 24-year-old Nelder experiments

    Institute of Scientific and Technical Information of China (English)

    Christian Kuehne; Edgar Kublin; Patrick Pyttel; Jürgen Bauhus


    Initial growing space is of critical importance to growth and quality development of individual trees.We investigated how mortality,growth (diameter at breast height,total height),natural pruning (height to first dead and first live branch and branchiness) and stem and crown form of 24-year-old pedunculate oak (Quercus robur [L.]) and European ash (Fraxinus excelsior [L.]) were affected by initial spacing.Data were recorded from two replicate single-species Nelder wheels located in southern Germany with eight initial stocking regimes varying from 1,020to 30,780 seedlings·ha-1.Mortality substantially decreased with increasing initial growing space but significantly differed among the two species,averaging 59% and 15% for oak and ash plots,respectively.In contrast to oak,the low self-thinning rate found in the ash plots over the investigated study period resulted in a high number of smaller intermediate or suppressed trees,eventually retarding individual tree as well as overall stand development.As a result,oak gained greater stem dimensions throughout all initial spacing regimes and the average height of ash significantly increased with initial growing space.The survival of lower crown class ashes also appeared to accelerate self-pruning dynamics.In comparison to oak,we observed less dead and live primary branches as well as a smaller number of epicormic shoots along the first 6 m of the lower stem of dominant and co-dominant ashes in all spacing regimes.Whereas stem form of both species was hardly affected by initial growing space,the percentage of brushy crowns significantly increased with initial spacing in oak and ash.Our findings suggest that initial stockings of ca.12,000seedlings per hectare in oak and 2,500 seedlings per hectare in ash will guarantee a sufficient number of at least 300 potential crop trees per hectare in pure oak and ash plantations at the end of the self-thinning phase,respectively.If the problem of epicormic shoots and inadequate self

  17. Genetic variation in dieback resistance in Fraxinus excelsior confirmed by progeny inoculation assay

    DEFF Research Database (Denmark)

    Lobo, Albin; McKinney, Lea Vig; Hansen, Jon Kehlet;


    Ash dieback caused by the pathogenic fungus Hymenoscyphus fraxineus [previously known as H. pseudoalbidus (sexual stage) and Chalara fraxinea (asexual stage)] is a widespread problem in Europe. Here, we assess crown damage from natural infection and necrosis development following artificial contr...... of heritable resistance and indicates that a bioassay based on controlled inoculations has the potential of becoming a fast and cost-effective tool for estimation of dieback susceptibility in breeding programmes for resistance in ash trees....

  18. Soil and pasture P concentration in a Fraxinus excelsior L. silvopastoral system fertilised with different types of sewage sludge (United States)

    Ferreiro-Domínguez, Nuria; Nair, Vimala; Rigueiro-Rodríguez, Antonio; Rosa Mosquera-Losada, María


    In Europe, sewage sludge should be stabilised before using as fertiliser in agriculture. Depending on the stabilisation process that is used, sewage sludge has different characteristics, nutrient contents and soil nutrient incorporation rates. Sewage sludge is usually applied on a plant-available N or total metal concentration basic, and therefore, P concentrations can be well above crop needs. Leaching of excess P can threaten surface and ground waters with eutrophication. In this context, recent studies have demonstrated that the implementation of agroforestry systems could reduce the P leaching risk compared with conventional agricultural systems due to the different localisation of tree and crop roots which enhance nutrient uptake. The aim of this study was to evaluate during three consecutive years the effect of municipal sewage sludge stabilised by anaerobic digestion, composting, and pelletisation on concentration of P in soil and pasture compared to control treatments (mineral and no fertilisation) in a silvopastoral system established under Fraxinus excelsior L. in Galicia (Spain). The results showed that at the beginning of the study, the fertilisation with mineral increased more the total and available P in soil than the fertilisation with sewage sludge probably because the sludge nutrient release rate is slower than those from mineral fertilisers. The increment of soil available P caused by the mineral fertiliser implied an improvement of the P concentration in the pasture. However, in the last year of the experiment it was observed a positive effect of the fertilisation with pelletised sludge on the concentration of P in pasture compared with the composted sludge and the mineral fertiliser probably due to the annual application of this type of sludge. Therefore, the establishment of silvopastoral systems and their fertilisation with pelletized sludge should be recommended because the pelletized sludge increases the concentration of P in the pasture and

  19. Effective population size estimation in seed orchards: A case study of Pinus nigra ARNOLD and Fraxinus excelsior L./ F. angustifolia VAHL.

    Directory of Open Access Journals (Sweden)

    Machanská Eva


    Full Text Available Effective population size as a parameter closely correlating with the genetic and genotypic diversity of the seed orchard output is an important indicator of seed orchard functioning. It is determined by the variation of male and female gametic contributions of parental genotypes (including those outside the seed orchard, influenced by the variation in male and female gamete production, reproductive phenology, pollen dispersal within seed orchard and other factors. We assessed male and female fecundity, as well as temporal course of male and female flowering in two seed orchards of Pinus nigra ARNOLD and Fraxinus excelsior L./F. angustifolia VAHL. in Slovakia. In both cases, male and female gametic contributions of plus-tree clones were modeled on the basis of fecundity and flowering phenology, and were used to calculate status number as an estimator of effective population size. In the seed orchard of Pinus nigra, marker-aided verification of clonal fidelity revealed unexpectedly high proportion of misplaced ramets (29.9% and alien genotypes (44.4%. Monitoring of reproductive processes in 2002 and 2003 showed high variation in both male and female fecundity, and pollen shedding preceding female receptivity in Pinus nigra. All these factors contributed to a very low relative status effective number, representing 8.6% to 38.6% of the population census (depending from the management option in relation to misplaced and alien genotypes. In the mixed seed orchard of Fraxinus excelsior and F. angustifolia, the proportion of misplaced and alien genotypes was much lower (22.4% and 12.3%, respectively. However, a high fecundity variation and protogyny resulted in a low relative status number (18.8% to 29.5% of the census number of clones also in this seed orchard. Practical implications of these findings are shortly discussed and practical management options are proposed.

  20. Genetic aspects of ash dieback caused by the pathogenic fungus Chalara fraxinea on Fraxinus excelsior

    DEFF Research Database (Denmark)

    McKinney, Lea Vig

    ). This thesis comprises five papers that aim to contribute to the knowledge on the interaction between the pathogen and its host and the inherent natural resistance found within the host species. Paper I reviews the current literature on the aetiology of the fungus, the epidemic and its consequences...

  1. Nutritional attributes of ash (Fraxinus spp.) outer bark and phloem and their relationships to resistance against the emerald ash borer. (United States)

    Hill, Amy L; Whitehill, Justin G A; Opiyo, Stephen O; Phelan, P Larry; Bonello, Pierluigi


    The emerald ash borer (Agrilus planipennis Fairmaire, EAB) is an alien, invasive wood-boring insect that is responsible for killing millions of ash trees since its discovery in North America in 2002. All North American ash species (Fraxinus spp.) that EAB has encountered have shown various degrees of susceptibility, while Manchurian ash (Fraxinus mandshurica Ruprecht), which shares a co-evolutionary history with this insect, is resistant. Recent studies have looked into constitutive resistance mechanisms in Manchurian ash, concentrating on the secondary phloem, which is the feeding substrate for the insect. In addition to specialized metabolism and defense-related components, primary metabolites and nutritional summaries can also be important to understand the feeding behavior of insect herbivores. Here, we have compared the nutritional characteristics (water content, total protein, free amino acids, total soluble sugars and starch, percent carbon and nitrogen, and macro- and micronutrients) of outer bark and phloem from black, green, white and Manchurian ash to determine their relevance to resistance or susceptibility to EAB. Water content and concentrations of Al, Ba, Cu, Fe, K, Li, tryptophan and an unknown compound were found to separate black and Manchurian ash from green and white ash in a principal component analysis (PCA), confirming their phylogenetic placements into two distinct clades. The traits that distinguished Manchurian ash from black ash in the PCA were water content and concentrations of total soluble sugars, histidine, lysine, methionine, ornithine, proline, sarcosine, tyramine, tyrosol, Al, Fe, K, Na, V and an unknown compound. However, only proline, tyramine and tyrosol were significantly different, and higher, in Manchurian ash than in black ash.

  2. Growth of Larval Agrilus planipennis (Coleoptera: Buprestidae) and Fitness of Tetrastichus planipennisi (Hymenoptera: Eulophidae) in Blue Ash (Fraxinus quadrangulata) and Green Ash (F. pennsylvanica). (United States)

    Peterson, Donnie L; Duan, Jian J; Yaninek, J S; Ginzel, Matthew D; Sadof, Clifford S


    Emerald ash borer (Agrilus planipennis Fairmaire) is an invasive primary pest of North American ash (Fraxinus spp.) trees. Blue ash (F. quadrangulata) is less susceptible to emerald ash borer infestations in the forest than other species of North American ash. Whereas other studies have examined adult host preferences, we compared the capacity of emerald ash borer larvae reared from emerald ash borer eggs in the field and in the laboratory to survive and grow in blue ash and the more susceptible green ash (F. pennsylvanica). Emerald ash borer larval survivorship was the same on both ash species. Mortality due to wound periderm formation was only observed in living field grown trees, but was low (<4%) in both green and blue ash. No difference in larval mortality in the absence of natural enemies suggests that both green and blue ash can support the development of emerald ash borer. Larvae reared from eggs on blue ash were smaller than on green ash growing in the field and also in bolts that were infested under laboratory conditions. In a laboratory study, parasitism rates of confined Tetrastichus planipennisi were similar on emerald ash borer larvae reared in blue and green ash bolts, as were fitness measures of the parasitoid including brood size, sex ratio, and adult female size. Thus, we postulate that emerald ash borer larvae infesting blue ash could support populations of T. planipennisi and serve as a potential reservoir for this introduced natural enemy after most of the other native ash trees have been killed.

  3. Collembola effects on plant mass and nitrogen acquisition by ash seedling (Fraxinus pennsylvanica)

    Energy Technology Data Exchange (ETDEWEB)

    Lussenhop, John; BassirRad, Hormoz [Illinois Univ., Biological Sciences Dept., Chicago, IL (United States)


    We studied the effects of varied collembolan numbers on three compensatory mechanisms of nutrient uptake: fine root mass, endomycorrhizal development, and physiological uptake capacity. We grew ash (Fraxinus pennsylvanica) with or without the arbuscular mycorrhizal fungus Glomus intraradices, with 0, 10 or 50 initial Collembola (Folsomia Candida). After 83 d root NH{sub 4} and NO{sub 3} uptake rates, endomycorrhizal development, and plant biomass were determined. Plant mass increased with Collembola number. Collembola interacted with mycorrhizae in their effects on N uptake and leaf N. Collembola in the absence of mycorrhizal roots were associated with lower N uptake and leaf N at 10 than at 0 or 50 initial Collembola. In contrast, Collembola in the presence of mycorrhizal roots were associated with the highest rate of N uptake and leaf N at 10 versus 0 or 50 initial Collembola. Hence as initial Collembola number increased, the relative importance of root system traits that determined N uptake changed from root physiological uptake capacity, presence of mycorrhizal roots, to fine root biomass. (Author)

  4. Genome sequence and genetic diversity of European ash trees

    DEFF Research Database (Denmark)

    Sollars, Elizabeth S A; Harper, Andrea L; Kelly, Laura J;


    Ash trees (genus Fraxinus, family Oleaceae) are widespread throughout the Northern Hemisphere, but are being devastated in Europe by the fungus Hymenoscyphus fraxineus, causing ash dieback, and in North America by the herbivorous beetle Agrilus planipennis. Here we sequence the genome of a low......-heterozygosity Fraxinus excelsior tree from Gloucestershire, UK, annotating 38,852 protein-coding genes of which 25% appear ash specific when compared with the genomes of ten other plant species. Analyses of paralogous genes suggest a whole-genome duplication shared with olive (Olea europaea, Oleaceae). We also re......-sequence 37 F. excelsior trees from Europe, finding evidence for apparent long-term decline in effective population size. Using our reference sequence, we re-analyse association transcriptomic data, yielding improved markers for reduced susceptibility to ash dieback. Surveys of these markers in British...

  5. Interspecific variation in resistance to emerald ash borer (Coleoptera: Buprestidae) among North American and Asian ash (Fraxinus spp.). (United States)

    Rebek, Eric J; Herms, Daniel A; Smitley, David R


    We conducted a 3-yr study to compare the susceptibility of selected North American ash and an Asian ash species to emerald ash borer, Agrilus planipennis Fairmaire, an invasive wood-boring beetle introduced to North America from Asia. Because of a coevolutionary relationship between Asian ashes and emerald ash borer, we hypothesized an Asian ash species, Manchurian ash, is more resistant to the beetle than its North American congeners. Consistent with our hypothesis, Manchurian ash experienced far less mortality and yielded far fewer adult beetles than several cultivars of North American green and white ash. Surprisingly, a black ash (North American) x Manchurian ash hybrid was highly susceptible to emerald ash borer, indicating this cultivar did not inherit emerald ash borer resistance from its Asian parent. A corollary study investigated the efficacy of soil-applied imidacloprid, a systemic, neonicotinoid insecticide, for controlling emerald ash borer in each of the five cultivars. Imidacloprid had no effect on emerald ash borer colonization of Manchurian ash, which was low in untreated and treated trees. In contrast, imidacloprid did enhance survival of the North American and hybrid cultivars and significantly reduced the number of emerald ash borer adults emerging from green and white ash cultivars. We identify a possible mechanism of resistance of Manchurian ash to emerald ash borer, which may prove useful for screening, selecting, and breeding emerald ash borer-resistant ash trees.

  6. Assessment of Thermo-treated Bonded Wood Performance: Comparisons among Norway Spruce, Common Ash, and Turkey Oak


    Angelo Rita; Nicola Moretti; Ignazia Cuccui,; Achille Pellerano; Luigi Todaro


    Polyvinyl acetate (PVA) exhibits fine adhesion qualities when bonded to wood. However, when using thermo-treated wood, a number of different unstudied factors (such as the water stress condition) influence the wood bonding effectiveness. The main goal of this study was to evaluate how different treatments affect the shear bonding strength for three cases of thermo-vacuum treated woods. Wood from both Norway spruce (Picea abies Karst.) and common ash (Fraxinus excelsior L.) was thermo-treated ...

  7. Genome sequence and genetic diversity of European ash trees. (United States)

    Sollars, Elizabeth S A; Harper, Andrea L; Kelly, Laura J; Sambles, Christine M; Ramirez-Gonzalez, Ricardo H; Swarbreck, David; Kaithakottil, Gemy; Cooper, Endymion D; Uauy, Cristobal; Havlickova, Lenka; Worswick, Gemma; Studholme, David J; Zohren, Jasmin; Salmon, Deborah L; Clavijo, Bernardo J; Li, Yi; He, Zhesi; Fellgett, Alison; McKinney, Lea Vig; Nielsen, Lene Rostgaard; Douglas, Gerry C; Kjær, Erik Dahl; Downie, J Allan; Boshier, David; Lee, Steve; Clark, Jo; Grant, Murray; Bancroft, Ian; Caccamo, Mario; Buggs, Richard J A


    Ash trees (genus Fraxinus, family Oleaceae) are widespread throughout the Northern Hemisphere, but are being devastated in Europe by the fungus Hymenoscyphus fraxineus, causing ash dieback, and in North America by the herbivorous beetle Agrilus planipennis. Here we sequence the genome of a low-heterozygosity Fraxinus excelsior tree from Gloucestershire, UK, annotating 38,852 protein-coding genes of which 25% appear ash specific when compared with the genomes of ten other plant species. Analyses of paralogous genes suggest a whole-genome duplication shared with olive (Olea europaea, Oleaceae). We also re-sequence 37 F. excelsior trees from Europe, finding evidence for apparent long-term decline in effective population size. Using our reference sequence, we re-analyse association transcriptomic data, yielding improved markers for reduced susceptibility to ash dieback. Surveys of these markers in British populations suggest that reduced susceptibility to ash dieback may be more widespread in Great Britain than in Denmark. We also present evidence that susceptibility of trees to H. fraxineus is associated with their iridoid glycoside levels. This rapid, integrated, multidisciplinary research response to an emerging health threat in a non-model organism opens the way for mitigation of the epidemic.

  8. A High-Resolution Map of Emerald Ash Borer Invasion Risk for Southern Central Europe

    Directory of Open Access Journals (Sweden)

    Viktoria Valenta


    Full Text Available Ash species (Fraxinus spp. in Europe are threatened by the Emerald Ash Borer (Agrilus planipennis, EAB, an invasive wood boring beetle native to East Asia and currently spreading from European Russia westwards. Based on a high-resolution habitat distribution map (grid cell size: 25 × 25 m and data on distribution and abundance of Common Ash (Fraxinus excelsior, the most widespread and highly susceptive host species of EAB in Europe, we assess the spatial distribution of EAB invasion risks for southern Central Europe (Austria, Switzerland, Liechtenstein, southern Germany, South Tyrol. We found highest F. excelsior abundance and thus invasion risks in extensive lowland floodplain forests, medium risks in zonal lowland forests and low risks in upper montane and subalpine forests. Based on average velocities of spread in Russia (13–31 km/year and North America (2.5–80 km/year from flight and human-assisted transport, EAB is likely to cover the distance (1500 km between its current range edge in western Russia and the eastern border of the study region within few decades. However, secondary spread by infested wood products make earlier introductions likely. The high susceptibility and mortality of F. excelsior leave no doubt that this beetle will become a major forest pest once it reaches Central Europe. Therefore, developing and testing management approaches with the aim to halt or at least slow down the invasion of EAB in Europe have to be pursued with great urgency.

  9. The susceptibility of Asian, European and North American Fraxinus species to the ash dieback pathogen Hymenoscyphus fraxineus reflects their phylogenetic history

    DEFF Research Database (Denmark)

    Nielsen, Lene R.; McKinney, Lea V.; Hietala, Ari M.;


    that there is species-specific variation in disease susceptibility among European and North American Fraxinus species, but a wider comparison at the genus level has been missing so far. We assessed disease symptoms and pathogen apothecium development in 17 Fraxinus species from Asia, Europe and North America exposed...... susceptibility where closely related Asian, European and North American species in section Fraxinus had relatively high levels of H. fraxineus DNA in the leaves and supported high production of apothecia. Leaves from some North American species also contained relatively high levels of H. fraxineus DNA, supported...

  10. 水曲柳天然林种群的点格局分析%Point Pattern Analysis of Manchurian Ash (Fraxinus mandshurica) Natural Population

    Institute of Scientific and Technical Information of China (English)

    许彦明; 张彦东; 孙海龙; 刘炜洋


    在黑龙江省五常市宝龙店林场,利用点格局分析法分析了水曲柳( Fraxinus mandshurica)种群不同龄级的空间分布格局和空间关联性。结果表明:龄级Ⅰ、Ⅱ、Ⅳ在0~50 m尺度上呈聚集分布,龄级Ⅲ在0~21 m尺度上呈聚集分布,21~50 m尺度上呈随机分布。水曲柳种群各龄级的数量随龄级增加呈倒“J”型分布,龄级Ⅰ个体数量最高,占总数量的89.5%,由龄级Ⅰ到龄级Ⅱ个体数量骤减,而龄级Ⅱ到龄级Ⅳ个体数量逐渐减少。龄级Ⅰ个体与其他龄级空间关联性较小,龄级Ⅱ与龄级Ⅲ、龄级Ⅲ与龄级Ⅳ的空间关联性总体较小,龄级Ⅱ与龄级Ⅳ在0~17 m尺度上呈负关联,17~50 m尺度上关联性较小。这说明龄级Ⅰ个体在空间上受其他龄级的影响较小,而龄级Ⅱ个体在空间上受到了龄级Ⅳ个体较大的影响。%By point pattern analysis , we studied the spatial distribution pattern and the spatial association of different age class Manchurian ash (Fraxinus mandshurica) population in Baolongdian Forest Farm, Wuchang, Heilongjiang Province.The age class I, II and IV had a clumped distribution at a scale 0-50 m.Age class III had a clumped distribution at a scale 0-21 m and a random distribution at a scale 21-50 m.The amount of each age class of ash population was a reverse “J”shape distribution with the increasing of age class .The amount of age class I individual is the highest , accounting for 89.5%.The amount decreased strongly from age class I to age class II , but the amount decreased slowly from age class II to IV .The spatial association between age class I and other three age classes at 0-50 m was feeble , as well as between age class II and III, and between age class III and IV in the mass .Between age class II and IV , the spatial association was significant-ly negative at 0-17 m, but feeble at the scale 17-50 m.An individual in age class I was less affected

  11. All European Ash Species are Susceptible to Emerald Ash Borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae – a Far Eastern Invader

    Directory of Open Access Journals (Sweden)

    Yu. N. Baranchikov


    Full Text Available Emerald ash borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae – an example of a destructive invasive insect which abruptly enlarged its initially East-Asian area in 80–90s of the previous century. Nowadays this species is the main pest of ash (Fraxinus trees in USA and Canada and is quickly spreading over 11 administrative regions of Russia. It is very important to determine a list of possible host plants of A. planipennis for the pest risk assessment of invasion of this pest over the territory of Central and Western Europe. In its native area – North-Eastern Asia – this buprestid is a secondary consumer of dying trees of East-Asian ash species F. сhinensis and F. mandshurica. Healthy trees of these species are highly resistant to the pest. No examples of resistant ash species were found at North American continent. Documentary data are presented for the first time on infestation of three European ash species at the territory of the Main Botanical Garden of the Russian Academy of Sciences in Moscow, Russia by the emerald ash borer. At the first time this pest was registered at the garden in 2011. During the period of 2010–2014 EAB killed from 70 to 100 % of trees of European ash species: Fraxinus excelsior, F. angustifolia (= F. oxycarpa and F. ornus. At the same period from 81 to 90 % of specimens of North American ash species (F. pennsylvanica and F. americana were killed by this buprestid. Simultaneously dead trees of Asian species F. mandshurica and F. chinensis (= F. rhynchophyla did not carry any trace of EAB infestation. This case study is a good example of the «sentinel trees» concept’s usefulness. Arboretums with collections of non-native plants may serve as «ecological traps» for the local pests and pathogens – potential invasive organisms in the source regions of introduced plants.

  12. Climate change and the ash dieback crisis (United States)

    Goberville, Eric; Hautekèete, Nina-Coralie; Kirby, Richard R.; Piquot, Yves; Luczak, Christophe; Beaugrand, Grégory


    Beyond the direct influence of climate change on species distribution and phenology, indirect effects may also arise from perturbations in species interactions. Infectious diseases are strong biotic forces that can precipitate population declines and lead to biodiversity loss. It has been shown in forest ecosystems worldwide that at least 10% of trees are vulnerable to extinction and pathogens are increasingly implicated. In Europe, the emerging ash dieback disease caused by the fungus Hymenoscyphus fraxineus, commonly called Chalara fraxinea, is causing a severe mortality of common ash trees (Fraxinus excelsior); this is raising concerns for the persistence of this widespread tree, which is both a key component of forest ecosystems and economically important for timber production. Here, we show how the pathogen and climate change may interact to affect the future spatial distribution of the common ash. Using two presence-only models, seven General Circulation Models and four emission scenarios, we show that climate change, by affecting the host and the pathogen separately, may uncouple their spatial distribution to create a mismatch in species interaction and so a lowering of disease transmission. Consequently, as climate change expands the ranges of both species polewards it may alleviate the ash dieback crisis in southern and occidental regions at the same time. PMID:27739483

  13. [Caspar Fraxinus's papers]. (United States)

    Grynaeus, T; Vida, T


    These 21 unpublished letters written by, to or about Gaspar Fraxinus were collected by Istvan Botta, Tivadar Vida and Tamás Grynaeus. Most of the letters were actually health reports written by Fraxinus to Count Nadasdy, though the doctor mentions various other subjects as well. We have followed the Hungarian practice in the publication. The numbers that precede the letters refer to their original date and put them in concordance with all the known Fraxinus letters. Where you find question marks with the numbers the exact date of the letter is uncertain. After the numbers there are also short summaries, and then comes the letter itself in its original language and spelling. Letters either in Latin or German have been translated into Hungarian by Tivadar Vida, and those written in old Hungarian were provided with a transcription that gives the modern spelling. Each unit is closed with the archival data: i.e. the name of the institution that has been trusted with the preservation, and the shelfmarks are indicated.

  14. Fraxinus pollen as a source of environmental pollution

    Directory of Open Access Journals (Sweden)

    María Fernández-González


    Full Text Available In Southern Europe there are but a few studies focused on the allergenic impact of ash (Fraxinus pollen as a result of its scarce distribution. In the city of Ourense this type of pollen represents 2% of the total atmospheric pollen recorded. The goal of this study is to determine the atmospheric concentrations of Fraxinus pollen and its allergen in Ourense’s atmosphere in 2015, and to assess their relationship with the main meteorological variables. The aim is to assess whether the pollen counts match the actual exposure conditions for allergen-sensitive patients. A Lanzoni VPPS-2000 volumetric sampler was used for pollen sampling, whereas a Burkard Cyclone sampler was used for allergen detection.The flowering period of Fraxinus was long, having a duration of 76 days between the third week of January and the rst week of April as consequence of the asynchronous flowering of the different species growing in the study area. The presence of the ash allergen in the atmosphere can be detected using the main olive tree allergen, Ole e 1. Our study indicates that the combination of pollen counts and allergen quanti cation should be contemplated to estimate the real exposure of sensitive people. In the case of Fraxinus pollen, there may be allergy risk periods before and after the occurrence of the highest pollen concentrations in the atmosphere as a result of special rain and humidity conditions during its flowering period.

  15. Influência de uma árvore isolada de freixo (Fraxinus angustifolia Vahl no microclima num lameiro em Trás-os-Montes Modification of microclimate by an isolated ash-tree (Fraxinus angustifolia Vahl in natural pastures of Northeastern Portugal

    Directory of Open Access Journals (Sweden)

    E. Pereira


    Full Text Available Estudaram-se as alterações microclimáticas decorrentes da presença de árvores isoladas de freixo (Fraxinus angustifolia Vahl num lameiro próximo de Alfaião (41º 46’ 55’’ N; 6º 24’ 51’’ W; 510m de altitude, no distrito de Bragança (Nordeste de Portugal, em que o clima é do tipo Csb de Köppen. O lameiro localiza-se no fundo de um pequeno vale, cujos solos correspondem a Fluvissolos êutricos. Durante três anos mediu-se a radiação solar global incidente em campo aberto e a transmitida através da copa da árvore, a temperatura do ar e do solo sob e fora do coberto e a precipitação incidente sob a copa e em campo aberto. Em todas as estações do ano a presença da árvore alterou significativamente o microclima sob a mesma devido à intercepção de radiação solar (cerca de 25 a 35% no Inverno e de 55 a 65% no Verão e de cerca de 40% do total anual da precipitação bruta (52-56% no período de Maio-Setembro e 35% no período de ausência de folhagem. As temperaturas médias do ar sob a influência da copa (SIC da árvore foram superiores às observadas fora da influência da copa (FIC, com as diferenças máximas ocorrendo durante o período nocturno e sendo da ordem de 3ºC no Verão e de 5ºC no Inverno. Os valores médios da temperatura do solo foram superiores na área SIC durante o Inverno (1,1ºC à profundidade de 20 cm e no Verão na área FIC (1ºC à profundidade de 2 cm. As amplitudes térmicas no ar e no solo da área SIC foram inferiores às observadas na FIC. As condições microclimáticas observadas sob coberto poderão favorecer o desenvolvimento da vegetação herbácea no fim do Inverno, o que pode afectar a produção de biomassa das herbáceas.Changes in microclimate caused by an isolated ash tree (Fraxinus angustifolia Vahl were assessed in a pasture land close to Bragança (41º 46’ 55’’ N; 6º 24’ 51’’ W; 510m de altitude, in Northeastern Portugal, where climate is Csb according

  16. Assortative mating and differential male mating success in an ash hybrid zone population

    Directory of Open Access Journals (Sweden)

    Frascaria-Lacoste Nathalie


    Full Text Available Abstract Background The structure and evolution of hybrid zones depend mainly on the relative importance of dispersal and local adaptation, and on the strength of assortative mating. Here, we study the influence of dispersal, temporal isolation, variability in phenotypic traits and parasite attacks on the male mating success of two parental species and hybrids by real-time pollen flow analysis. We focus on a hybrid zone population between the two closely related ash species Fraxinus excelsior L. (common ash and F. angustifolia Vahl (narrow-leaved ash, which is composed of individuals of the two species and several hybrid types. This population is structured by flowering time: the F. excelsior individuals flower later than the F. angustifolia individuals, and the hybrid types flower in-between. Hybrids are scattered throughout the population, suggesting favorable conditions for their local adaptation. We estimate jointly the best-fitting dispersal kernel, the differences in male fecundity due to variation in phenotypic traits and level of parasite attack, and the strength of assortative mating due to differences in flowering phenology. In addition, we assess the effect of accounting for genotyping error on these estimations. Results We detected a very high pollen immigration rate and a fat-tailed dispersal kernel, counter-balanced by slight phenological assortative mating and short-distance pollen dispersal. Early intermediate flowering hybrids, which had the highest male mating success, showed optimal sex allocation and increased selfing rates. We detected asymmetry of gene flow, with early flowering trees participating more as pollen donors than late flowering trees. Conclusion This study provides striking evidence that long-distance gene flow alone is not sufficient to counter-act the effects of assortative mating and selfing. Phenological assortative mating and short-distance dispersal can create temporal and spatial structuring that appears

  17. Designing Strategies for Epidemic Control in a Tree Nursery: the Case of Ash Dieback in the UK

    Directory of Open Access Journals (Sweden)

    Vasthi Alonso Chavez


    Full Text Available Ash dieback is a fungal disease (causal agent Hymenoscyphus fraxineus infecting Common ash (Fraxinus excelsior throughout temperate Europe. The disease was first discovered in the UK in 2012 in a nursery in Southern England, in plants which had been imported from the Netherlands. After sampling other recently planted sites across England, more infected trees were found. Tree trade from outside and across the UK may have facilitated the spread of invasive diseases which threaten the sustainability of forestry business, ecological niches and amenity landscapes. Detecting a disease in a nursery at an early stage and knowing how likely it is for the disease to have spread further in the plant trade network, can help control an epidemic. Here, we test two simple sampling rules that 1 inform monitoring strategies to detect a disease at an early stage, and 2 inform the decision of tracking forward the disease after its detection. We apply these expressions to the case of ash dieback in the UK and test them in different scenarios after disease introduction. Our results are useful to inform policy makers’ decisions on monitoring for the control and spread of tree diseases through the nursery trade.

  18. Emerald Ash Borer (Coleoptera: Buprestidae) (United States)

    The emerald ash borer, Agrilus planipennis Fairmaire, is an invasive beetle from Asia that has caused large scale ash (Fraxinus spp.) mortality in North America. This book chapter reviews the taxonomy, biology, life history of this invasive pest and its associated natural enemies in both its native ...

  19. Excelsior: Bringing the Benefits of Modularisation to Excel

    CERN Document Server

    Paine, Jocelyn


    Excel lacks features for modular design. Had it such features, as do most programming languages, they would save time, avoid unneeded programming, make mistakes less likely, make code-control easier, help organisations adopt a uniform house style, and open business opportunities in buying and selling spreadsheet modules. I present Excelsior, a system for bringing these benefits to Excel.

  20. Assessment of Thermo-treated Bonded Wood Performance: Comparisons among Norway Spruce, Common Ash, and Turkey Oak

    Directory of Open Access Journals (Sweden)

    Angelo Rita


    Full Text Available Polyvinyl acetate (PVA exhibits fine adhesion qualities when bonded to wood. However, when using thermo-treated wood, a number of different unstudied factors (such as the water stress condition influence the wood bonding effectiveness. The main goal of this study was to evaluate how different treatments affect the shear bonding strength for three cases of thermo-vacuum treated woods. Wood from both Norway spruce (Picea abies Karst. and common ash (Fraxinus excelsior L. was thermo-treated at 190 °C for two hours under vacuum conditions (250 mbar. Turkey oak (Quercus cerris L. logs were separately steamed at 110 °C for 24 h, then thermo-vacuum treated at 160 °C for three hours. The bonding shear strength between the PVA adhesive and treated wood was evaluated using water stress condition. The results were compared with the adhesive bond line properties of the untreated wood. The shear strength and wettability of the produced material were measured. Tests for the shear resistance, performed in accordance with the standard DIN EN 204, revealed dissimilar behavior as well as the influence of treatment schedules for the different wood species. Consequently, the tests performed allowed a detailed characterization of the effect of the thermo-vacuum process on the bonding quality of three common woods in different water stress conditions.

  1. Fraxinus pollen and allergen concentrations in Ourense (South-western Europe). (United States)

    Vara, A; Fernández-González, M; Aira, M J; Rodríguez-Rajo, F J


    In temperate zones of North-Central Europe the sensitization to ash pollen is a recognized problem, also extended to the Northern areas of the Mediterranean basin. Some observations in Switzerland suggest that ash pollen season could be as important as birch pollen period. The allergenic significance of this pollen has been poorly studied in Southern Europe as the amounts of ash pollen are low. Due to the high degree of family relationship with the olive pollen major allergen (backed by a sequence identity of 88%), the Fraxinus pollen could be a significant cause of early respiratory allergy in sensitized people to olive pollen as consequence of cross-reactivity processes. Ash tree flowers in the Northwestern Spain during the winter months. The atmospheric presence of Ole e 1-like proteins (which could be related with the Fra a 1 presence) can be accurately detected using Ole e 1 antibodies. The correlation analysis showed high Spearman correlation coefficients between pollen content and rainfall (R(2)=-0.333, ppollen in the air, facilitating the wind speed its submicronic allergen proteins dispersion. In order to forecast the Fraxinus allergy risk periods, two regression equations were developed with Adjusted R(2) values around 0.48-0.49. The t-test for dependent samples shows no significant differences between the observed data and the estimated by the equations. The combination of the airborne pollen content and the allergen quantification must be assessed in the epidemiologic study of allergic respiratory diseases.

  2. Genome sequence and genetic diversity of European ash trees

    DEFF Research Database (Denmark)

    Sollars, Elizabeth S A; Harper, Andrea L; Kelly, Laura J;


    Ash trees (genus Fraxinus, family Oleaceae) are widespread throughout the Northern Hemisphere, but are being devastated in Europe by the fungus Hymenoscyphus fraxineus, causing ash dieback, and in North America by the herbivorous beetle Agrilus planipennis. Here we sequence the genome of a low...... to an emerging health threat in a non-model organism opens the way for mitigation of the epidemic....

  3. Effects of the emerald ash borer invasion on the community composition of arthropods associated with ash tree boles (United States)

    Emerald ash borer (EAB), Agrilus planipennis Fairmaire is an invasive non-native wood-boring beetle that has killed hundreds of millions of ash trees (Fraxinus spp.) in North America, and threatens to extirpate the ecological services provided by the genus. Identifying the arthropod community assoc...

  4. 76 FR 5679 - Emerald Ash Borer; Addition of Quarantined Areas in Kentucky, Michigan, Minnesota, New York... (United States)


    ... planipennis) is a destructive wood-boring insect that attacks ash trees (Fraxinus spp., including green ash.... Ash trees are valuable to the commercial timber industry and are commonly planted in urban areas. In... nurseries, timber operations, and landscaping. These potential economic impacts would likely be much...

  5. Two New Coumarins from Fraxinus chinensis Rexb.

    Institute of Scientific and Technical Information of China (English)

    Dong-Mei Zhang; Li-Li Wang; Jia Li; Li-Hong Hu


    The ethanol extract of the stem bark of Fraxinus chinensis Roxb. showed good inhibitory bioactivity against VEGF receptor-1 kinase (IC50:13.8 μg/mL). In order to find new and bioactive compounds, the chemical constituents of the stem bark of F. chinensis were investigated and two new coumarins, namely 6'-O-sinapinoyl esculin (compound 1) and 6'-O-vanillyl esculin (compound 2), together with eleven known compounds (compounds 3-13) were isolated.The structures of the two new compounds were identified by their physicochemical properties and spectral analysis, particularly one- and two-dimens ional nuclear magnetic resonance spectral methods. The known compound, oleuropein (compound 11), exhibited moderate activity (IC50:(8.7 ± 1.3) μmol/L) to inhibit VEGF receptor-1 kinase.

  6. Morphological variability of Fraxinus angustifolia Vahl in the north-western Balkans

    Directory of Open Access Journals (Sweden)

    Kristjan Jarni


    Full Text Available Fraxinus angustifolia Vahl is a species native in the north-western Balkans, where it has a divided range. Most of its range is located in flood-prone riparian sites in the Pannonian plain but the species is also found on humid sites along some rivers in the Submediterranean region. We analysed morphologic variation within and between five populations (14 trees/population located in the Subpannonian and Submediterranean region of Slovenia. Thirty two characters were assessed on ca. 80 leaves from each tree which were divided depending on exposure to sunlight (sun and shade leaves, and 8 traits on each fruit (ca. 50 fruits/tree. A hierarchically designed experiment using analysis of variance confirmed the significant contribution of all the analysed hierarchical levels of variation to the total variation. The results show that the differences between the trees in a single population are the greatest factor of variability of leaves, followed by differences between populations and differences which are the result of variation in exposure to sunlight. Leaves in shade positions are typically larger than those in sunny positions, and they have broader and shorter-pointed leaflets; in this feature they are very similar to the leaves of F. excelsior. Stepwise discriminant analysis showed that the traits which refer to the leaflet number and length are the best differentiating traits between individual populations. The Submediterranean population Dragonja stands out with the smallest leaves and the population Lijak from the same region is the most similar to Dragonja for most morphological traits. In general, phenotypic differences between the Subpannonian and the Submediterranean populations of F. angustifolia are minor and indistinct. Based on the differences ascertained by the study, we can only confirm the presence of F. angustifolia subsp. oxycarpa (Bieb. ex Willd. Franco et Rocha Alfonso in this part of its natural range.

  7. Natural enemies implicated in the regulation of an invasive pest: a life table analysis of the population dynamics of the emerald ash Borer (United States)

    The emerald ash borer (EAB), Agrilus planipennis Fairmaire, is a serious invasive forest pest that has killed tens of millions of ash (Fraxinus) trees in the United States and Canada. By caging EAB adults on trunks of healthy ash trees, we established three generations of experimental cohorts from ...

  8. Chemical constituents from branch of Fraxinus sieboldiana. (United States)

    Lin, Sheng; Zhang, Yan-ling; Liu, Ming-tao; Zi, Jia-chen; Gan, Mao-luo; Song, Wei-xia; Fan, Xiao-na; Wang, Xiao-na; Yang, Yong-chun; Shi, Jian-gong


    Using a combination of various chromatographic techniques including column chromatography over silica gel, Sephadex LH-20, macroporous adsorbent resin, and reversed-phase HPLC, 115 compounds including diterpenes, sesquiterpenes, treterpenes, coumarins, lignans, fatty acid derivatives, and simple aromatic derivatives were isolated from an ethanol extract of branch of Fraxinus sieboldiana (Oleaceaue), and their structures of the compounds were elucidated by spectroscopic methods including 1 D, 2D NMR and MS techniques. Among them, 41 compounds were new. In previous reports, we have been described the isolation, structure elucidation, and bioactivities of the 41 new compounds and 22 known orii including 8 coumarins, 4 phenolic and 12 phenylethanoidal glycosides. As a consequence, we herein reported the isolation and structure elucidation of the remaining 50 known compounds including 8- hydroxy-12-oxoabieta-9(11),13-dien-20-oic 8, 20-lactone(1), 6beta-hydroxyfcrruginol(2),(+)-pisiferic acid(3), (+)-pisiferal(4),(+)-7-dehydroabiet6none(5), 1-oxomiltirone(6), subdigitatone(7), linarionoside B(8), (9S)-linarionoside B(9), (3R,9R)-3-hydroxy-7,8-dihydro-beta-ionol 9-O-beta-D-apiofuranosyl-(1-->6)-beta-D-glucopyranoside(10), ursolic acid(11), betulinic acid(12), euscaphic acid(13), (+)-syringaresinol(14), (+)-fraxiresinol(15), (+)-1-hydroxysyringaresinol(16), pinoresinol(17), medioresinol(18), 8-acetoxypinoresinol(19), epipinoresinol(20), (-)-olivil(21), (+)-cyclo-olivil(22), 3,3'-dimethoxy-4,4',9-trihydroxy-7,9'-epoxylignan-7'-one(23),(+)-1-hydroxypinoresinol 4'-O-beta-D-glucopyranoside (24), (+)-1-hydroxypinoresinol 4"-O-beta-D-glucopyranoside(25),(+)-syringaresinol O-beta-D-glucopyranoside (26), liriodendrin (27), ehletianol D(28), icariside E5(29) (-)-(7R, 8R)-threo-1-C-syringylglycerol(30),(-)-(7R, 8S)-erythro-guaiacylglycerol (31),(-)-(7R, 8R)-threo-guaiacylglycerol(32), 3-(4-beta-D-glucopyranosyloxy-3-methoxy)-phenyl-2E-propenol(33),2,3-dihydroxy-l-(4-hydroxy-3

  9. Indirect effects of emerald ash borer-induced ash mortality and canopy gap formation on epigaeic beetles. (United States)

    Gandhi, Kamal J K; Smith, Annemarie; Hartzler, Diane M; Herms, Daniel A


    Exotic herbivorous insects have drastically and irreversibly altered forest structure and composition of North American forests. For example, emerald ash borer (Agrilus planipennis Fairmaire) from Asia has caused wide-scale mortality of ash trees (Fraxinus spp.) in eastern United States and Canada. We studied the effects of forest changes resulting from emerald ash borer invasion on epigaeic or ground beetles (Coleoptera: Carabidae) along a gradient of ash dieback and gap sizes in southeastern Michigan. Ground beetles were sampled in hydric, mesic, and xeric habitats in which black (Fraxinus nigra Marshall), green (Fraxinus pennsylvanica Marshall), and white (Fraxinus americana L.) ash were the most common species, respectively. During 2006-2007, we trapped 2,545 adult ground beetles comprising 52 species. There was a negative correlation between percent ash tree mortality in 2006 and catches of all beetles. Catches of Agonum melanarium Dejean (in 2006) and Pterostichus mutus (Say) (in 2006-2007) were negatively correlated with tree mortality and gap size, respectively. However, catches of Pterostichus corvinus Dejean were positively correlated with gap size in 2006. As ash mortality and average gap size increased from 2006 to 2007, catches of all beetles as well as P. mutus and Pterostichus stygicus (Say) increased (1.3-3.9 times), while species diversity decreased, especially in mesic and xeric stands. Cluster analysis revealed that beetle assemblages in hydric and mesic stand diverged (25 and 40%, respectively) in their composition from 2006 to 2007, and that hydric stands had the most unique beetle assemblages. Overall, epigaeic beetle assemblages were altered in ash stands impacted by emerald ash borer; however, these impacts may dissipate as canopy gaps close.

  10. The Effect of Different Stratification Conditions on the Germination of Fraxinus angustifolia Vahl. and F. ornus L. Seeds

    Directory of Open Access Journals (Sweden)

    Cristina DRAGHICI


    Full Text Available The aim of the paper was to assess the impact of different stratification treatments recommended by the literature on the shortening of manna ash (F. ornus L. and narrow-leaved ash (F. angustifolia Vahl. seed germination in order to identify a suitable pre-germination treatment for seedling production. Seeds of three Southern Romanian origins for both species were exposed to four stratification treatments (cold (3oC and warm (20oC, with and without sand-peat medium. The highest percentage of germination (up to 87% for Fraxinus ornus and up to 71% for F. angustifolia was recorded in the case of the stratified seeds with cold medium (3oC and relatively constant seed moisture (between 45% and 65% throughout the treatment.

  11. Developing rearing methods for Tetrastichus planipennisi (Hymenoptera: Eulophidae), a larval endoparasitoid of the emerald ash borer (Coleoptera: Buprestidae) (United States)

    Tetrastichus planipennisi Yong, a gregarious koinobiont endoparasitoid, is one of three hymenopteran parasitoids being released in the U.S. for biological control of the emerald ash borer (Agrilus planipennis Fairmair, EAB), an invasive beetle from Asia causing mortality of the ash trees (Fraxinus s...

  12. The role of emerald ash borer (Coleoptera: Buprestidae) larval vibrations in host-quality assessment by Tetrastichus planipennisi (Hymenoptera: Eulophidae) (United States)

    1. The biological control agent, Tetrastichus planipennisi Yang, is a gregarious larval endoparasitoid of the emerald ash borer (EAB), an invasive phloem-feeding species responsible for recent, widespread mortality of ash (Fraxinus spp.) in North America. 2. Tetrastichus planipennisi is known to pre...

  13. Lessons from Fraxinus, a crowd-sourced citizen science game in genomics (United States)

    Rallapalli, Ghanasyam; Saunders, Diane GO; Yoshida, Kentaro; Edwards, Anne; Lugo, Carlos A; Collin, Steve; Clavijo, Bernardo; Corpas, Manuel; Swarbreck, David; Clark, Matthew; Downie, J Allan; Kamoun, Sophien


    In 2013, in response to an epidemic of ash dieback disease in England the previous year, we launched a Facebook-based game called Fraxinus to enable non-scientists to contribute to genomics studies of the pathogen that causes the disease and the ash trees that are devastated by it. Over a period of 51 weeks players were able to match computational alignments of genetic sequences in 78% of cases, and to improve them in 15% of cases. We also found that most players were only transiently interested in the game, and that the majority of the work done was performed by a small group of dedicated players. Based on our experiences we have built a linear model for the length of time that contributors are likely to donate to a crowd-sourced citizen science project. This model could serve a guide for the design and implementation of future crowd-sourced citizen science initiatives. DOI: PMID:26219214

  14. Impact of Beauveria bassiana and imidacloprid, alone and in combination, used against emerald ash borer in a newly-infested ash nursery (United States)

    We are investigating the potential of Beauveria bassiana (strain GHA), alone or in combination with imidacloprid, for use against the emerald ash borer (EAB), Agrilus planipennis. We treated approximately 400 Fraxinus pennsylvanica and F. americana (height ca. 5-6 m) at a commercial tree nursery wit...

  15. Monitoring the establishment and flight phenology of egg and larval parasitoids of emerald ash borer (Coleoptera: Buprestidae) in Michigan, USA using sentinel eggs and larvae (United States)

    Emerald ash borer (EAB), Agrilus planipennis Fairmaire, is an important invasive pest of ash (Fraxinus) trees in North America. Two larval parasitoids, Tetrastichus planipennisi Yang and Spathius agrili Yang, and one egg parasitoid, Oobius agrili Zhang and Huang, were introduced into the United Sta...

  16. Biology and Life History of Atanycolus cappaerti (Hymenoptera: Braconidae), a North American Larval Parasitoid Attacking the Invasive Emerald Ash Borer (Coleoptera: Buprestidae) (United States)

    Atanycolus cappaerti Marsh and Strazanac is a native North American parasitoid that has been found to parasitize the emerald ash borer, Agrilus planipennis Fairmaire, a serious invasive pests of North American ash trees (Fraxinus spp.). To facilitate the development of potential augmentative biocon...

  17. Interspecific comparison of constitutive ash phloem phenolic chemistry reveals compounds unique to manchurian ash, a species resistant to emerald ash borer. (United States)

    Whitehill, Justin G A; Opiyo, Stephen O; Koch, Jennifer L; Herms, Daniel A; Cipollini, Donald F; Bonello, Pierluigi


    The emerald ash borer (Agrilus planipennis, EAB) is an invasive wood-borer indigenous to Asia and is responsible for widespread ash (Fraxinus spp.) mortality in the U.S. and Canada. Resistance and susceptibility to EAB varies among Fraxinus spp., which is a result of their co-evolutionary history with the pest. We characterized constitutive phenolic profiles and lignin levels in the phloem of green, white, black, blue, European, and Manchurian ash. Phloem was sampled twice during the growing season, coinciding with phenology of early and late instar EAB. We identified 66 metabolites that displayed a pattern of variation, which corresponded strongly with phylogeny. Previously identified lignans and lignan derivatives were confirmed to be unique to Manchurian ash, and may contribute to its high level of resistance to EAB. Other compounds that had been considered unique to Manchurian ash, including hydroxycoumarins and the phenylethanoids calceolarioside A and B, were detected in closely related, but susceptible species, and thus are unlikely to contribute to EAB resistance of Manchurian ash. The distinct phenolic profile of blue ash may contribute to its relatively high resistance to EAB.

  18. Phylogeography of the large white-bellied rat Niviventer excelsior suggests the influence of Pleistocene glaciations in the Hengduan mountains. (United States)

    Chen, Weicai; Liu, Shaoying; Liu, Yang; Hao, Haibang; Zeng, Bo; Chen, Shunde; Peng, Hongyuan; Yue, Bisong; Zhang, Xiuyue


    The Hengduan Mountains, situated in the southeastern Tibetan Plateau, have undergone dramatic geological and climatic changes over the Pleistocene epoch. Several studies have revealed that the mountains served as a refugium during the ice age. The large white-bellied rat Niviventer excelsior is a rodent endemic to the Hengduan Mountains, which makes it an appropriate species for investigating the influence of glacial movements on the genetic structure of mammals. In this study, we sequenced the partial mitochondrial DNA control region from 72 N. excelsior specimens collected from 20 localities. The results revealed very high levels of haplotype diversity (h = 0.947) and nucleotide diversity (pi = 0.101) in this species. No common haplotype was found to be shared in samples from all geographic regions. Demographic analyses suggested that N. excelsior populations had not been subject to either expansion or bottleneck. The phylogenetic relationships among the haplotypes have no correlation with their geographical origins, while topology revealed two major clades. We speculate that the populations of N. excelsior may have been restricted to two separate refugia during the Last Glacial Maximum (0.60-0.17 Mya), with one west and one east of the Shaluli Mountains. Between the two major refugia, there existed a more widely distributed network subrefugia, which conserved genetic variations in N. excelsior. These results indicated that complex topographic configuration in the Hengduan Mountains provided a network of refugia to maintain the high level of genetic diversity in Pleistocene glaciations.

  19. Thermal constraints on the emerald ash borer invasion of North America (United States)

    DeSantis, R.; Moser, W. K.; Gormanson, D. D.; Bartlett, M. G.


    Emerald ash borer (Agrilus planipennis Fairmaire; EAB), a non-native invasive beetle, has caused substantial damage to green (Fraxinus pennsylvanica Marsh.), white (Fraxinus americana L.), and black ash (Fraxinus nigra Marsh.), the major ash species of North America. In the absence of effective methods for controlling or eradicating the beetle, EAB continues to spread unimpeded across North America. Evidence indicates the mortality rate for EAB-infested trees near the epicenter of the infestation in southeast Michigan exceeds 99 percent for the major ash species. One possible climatic limitation on the spread of the infestation is suggested by recent work indicating that beetles cannot survive exposure to temperatures below -35.3 degrees Celsius. We considered whether this thermal constraint will limit the spread and distribution of EAB in North America. Historical climatic data for the United States and Canada were employed along with thermal models of the conditions beneath likely winter snowpack and beneath tree bark to predict the potential geographic distribution of the invasion. Results suggested the thermal mortality constraint will not lead to the protection of ash stands across most of North America. However, recent work indicates the majority of beetles cannot survive exposure to temperatures below -30 degrees Celsius. Along with our results, this suggests thermal constraints near the northern and western edges of the ranges of ash might limit EAB survival to some extent, thereby reducing the EAB population, the likelihood of EAB infestation, and subsequent ash mortality.

  20. Bud Necrosis of Green Ash Nursery Trees is Influenced by Nitrogen Availability and Fertilizer Type (United States)

    A study was conducted to determine whether nitrogen (N) status of nursery-grown green ash (Fraxinus pennsylvanica ‘Summit’) trees in the autumn is related to tip die back during the following spring. In 2005, different rates of N from either urea formaldehyde (UF) or a controlled release fertilizer ...

  1. Biotic and abiotic factors affect green ash volatile production and emerald ash borer adult feeding preference. (United States)

    Chen, Yigen; Poland, Therese M


    The emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), is an exotic woodborer first detected in 2002 in Michigan and Ontario and is threatening the ash resource in North America. We examined the effects of light exposure and girdling on green ash (Fraxinus pennsylvanica Marsh) volatile production, and effects of light exposure, girdling, and leaf age on emerald ash borer adult feeding preferences and phototaxis. Green ash seedlings grown under higher light exposure had lower amounts of three individual volatile compounds, (Z)-3-hexenol, (E)-beta-ocimene, and (Z,E)-alpha-farnesene, as well as the total amount of six detected volatile compounds. Girdling did not affect the levels of these volatiles. Emerald ash borer females preferred mature leaves, leaves from girdled trees, and leaves grown in the sun over young leaves, leaves from nongirdled trees, and leaves grown in the shade, respectively. These emerald ash borer preferences were most likely because of physical, nutritional, or biochemical changes in leaves in response to the different treatments. Emerald ash borer females and males showed positive phototaxis in laboratory arenas, a response consistent with emerald ash borer preference for host trees growing in sunlight.

  2. Long-term monitoring of the introduced emerald ash borer (Coleoptera: Buprestidae) egg parasitoid, oobius agrili (Hymenoptera: Encyridae), in Michigan, USA and evaluation of a newly developed monitoring technique (United States)

    Emerald ash borer (EAB), Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), is a serious invasive pest of ash trees (Fraxinus spp.) in North America. The egg parasitoid Oobius agrili Zhang and Huang (Hymenoptera: Encyrtidae) was introduced as a biological control agent of this pest in Michiga...

  3. Interspecific proteomic comparisons reveal ash phloem genes potentially involved in constitutive resistance to the emerald ash borer.

    Directory of Open Access Journals (Sweden)

    Justin G A Whitehill

    Full Text Available The emerald ash borer (Agrilus planipennis is an invasive wood-boring beetle that has killed millions of ash trees since its accidental introduction to North America. All North American ash species (Fraxinus spp. that emerald ash borer has encountered so far are susceptible, while an Asian species, Manchurian ash (F. mandshurica, which shares an evolutionary history with emerald ash borer, is resistant. Phylogenetic evidence places North American black ash (F. nigra and Manchurian ash in the same clade and section, yet black ash is highly susceptible to the emerald ash borer. This contrast provides an opportunity to compare the genetic traits of the two species and identify those with a potential role in defense/resistance. We used Difference Gel Electrophoresis (DIGE to compare the phloem proteomes of resistant Manchurian to susceptible black, green, and white ash. Differentially expressed proteins associated with the resistant Manchurian ash when compared to the susceptible ash species were identified using nano-LC-MS/MS and putative identities assigned. Proteomic differences were strongly associated with the phylogenetic relationships among the four species. Proteins identified in Manchurian ash potentially associated with its resistance to emerald ash borer include a PR-10 protein, an aspartic protease, a phenylcoumaran benzylic ether reductase (PCBER, and a thylakoid-bound ascorbate peroxidase. Discovery of resistance-related proteins in Asian species will inform approaches in which resistance genes can be introgressed into North American ash species. The generation of resistant North American ash genotypes can be used in forest ecosystem restoration and urban plantings following the wake of the emerald ash borer invasion.

  4. Interspecific proteomic comparisons reveal ash phloem genes potentially involved in constitutive resistance to the emerald ash borer. (United States)

    Whitehill, Justin G A; Popova-Butler, Alexandra; Green-Church, Kari B; Koch, Jennifer L; Herms, Daniel A; Bonello, Pierluigi


    The emerald ash borer (Agrilus planipennis) is an invasive wood-boring beetle that has killed millions of ash trees since its accidental introduction to North America. All North American ash species (Fraxinus spp.) that emerald ash borer has encountered so far are susceptible, while an Asian species, Manchurian ash (F. mandshurica), which shares an evolutionary history with emerald ash borer, is resistant. Phylogenetic evidence places North American black ash (F. nigra) and Manchurian ash in the same clade and section, yet black ash is highly susceptible to the emerald ash borer. This contrast provides an opportunity to compare the genetic traits of the two species and identify those with a potential role in defense/resistance. We used Difference Gel Electrophoresis (DIGE) to compare the phloem proteomes of resistant Manchurian to susceptible black, green, and white ash. Differentially expressed proteins associated with the resistant Manchurian ash when compared to the susceptible ash species were identified using nano-LC-MS/MS and putative identities assigned. Proteomic differences were strongly associated with the phylogenetic relationships among the four species. Proteins identified in Manchurian ash potentially associated with its resistance to emerald ash borer include a PR-10 protein, an aspartic protease, a phenylcoumaran benzylic ether reductase (PCBER), and a thylakoid-bound ascorbate peroxidase. Discovery of resistance-related proteins in Asian species will inform approaches in which resistance genes can be introgressed into North American ash species. The generation of resistant North American ash genotypes can be used in forest ecosystem restoration and urban plantings following the wake of the emerald ash borer invasion.

  5. Impact factors on fine root seasonal dynamics in Fraxinus mandshurica plantations

    Institute of Scientific and Technical Information of China (English)

    MEI Li; HAN Youzhi; YU Shuiqiang; SHI Jianwei; WANG Zhengquan


    Fine root turnover plays important roles in carbon allocation and nutrient cycling in forest ecosystems.Seasonal dynamics of fine roots is critical for understanding the processes of fine root turnover.From May to October 2002,soil core method was used for estimating the seasonal pattern of fine root (diameter < 1 mm) parameters (biomass,specific root length (SRL) and root length density (RLD)) in a Manchurian ash (Fraxinus mandshurica) plantation located at the Maoershan Experiment Station,Heilongjiang Province,northeast of China.The relationships of fine root biomass,SRL and RLD with available nitrogen in soil,average soil temperature per month in 10 cm depth and soil moisture content were analyzed.Seasonal variation of fine root biomass was significant (P < 0.05).The peak values of fine root biomass were observed both in spring and in autumn,but SRL and RLD were the highest in spring and lowest in autumn.Specific root length and root length density were higher in spring and summer,which means that fine root diameter was thinner.In autumn,both parameters decreased significantly due to secondary incrassation of fine root diameter or the increase of tissue density.Seasonal dynamics of fine roots was associated with available nitrogen in soil,soil temperature in 10 cm depth and moisture content.Fine root biomass has a significant relationship with available NH4+-N in soil.Available NO3--N in soil,soil temperature in 10-cm depth and moisture content have a positive correlation with fine root biomass,SRL and RLD,although these correlations are not significant (P >0.05).But the compound effects of soil available N,soil temperature and soil moisture content are significant to every root parameter.The variations of these three root parameters in different seasons show different physiological and ecological functions in different growing periods.

  6. Influence of main site factors on Fraxinus mandshurica(Oleaceae) plantation

    Institute of Scientific and Technical Information of China (English)

    SUHan-ying; LINDai-bin


    The investigation was carried out on 10-year-old plantation of Fraxinus mandshurica in Mao'er Mountain Experimental Station of Northeast Forest University.tree height(H),diameter at breast height(D1.3) and the increment of tree height in 5 years (H5),the thickness of humus layer,as well as the soil moisture were measured for the plantation and the growth indexes(H,D1.3,H5) for different site conditions were analyzed.The results showedthat main site factors influencing the growth of Fraxinus mandshurica were soil moisture,gradient and location of siope in order.The growth of Fraxinus mandshurica was better on the middle-or up-slope site than on the down-slope site.Soil moisture and late frost caused by terrain are the main reasons that limit the growth of Fraxinus mandshurica plantation.

  7. Feeding by emerald ash borer larvae induces systemic changes in black ash foliar chemistry. (United States)

    Chen, Yigen; Whitehill, Justin G A; Bonello, Pierluigi; Poland, Therese M


    The exotic wood-boring pest, emerald ash borer (EAB), Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), has been threatening North American ash (Fraxinus spp.) resources, this being recognized since its first detection in Michigan, USA and Ontario, Canada in 2002. Ash trees are killed by larval feeding in the cambial region, which results in disruption of photosynthate and nutrient translocation. In this study, changes in volatile and non-volatile foliar phytochemicals of potted 2-yr-old black ash, Fraxinus nigra Marshall, seedlings were observed in response to EAB larval feeding in the main stem. EAB larval feeding affected levels of six compounds [hexanal, (E)-2-hexenal, (Z)-3-hexenyl acetate, (E)-β-ocimene, methyl salicylate, and (Z,E)-α-farnesene] with patterns of interaction depending upon compounds of interest and time of observation. Increased methyl salicylate emission suggests similarity in responses induced by EAB larval feeding and other phloem-feeding herbivores. Overall, EAB larval feeding suppressed (Z)-3-hexenyl acetate emission, elevated (E)-β-ocimene emission in the first 30days, but emissions leveled off thereafter, and generally increased the emission of (Z,E)-α-farnesene. Levels of carbohydrates and phenolics increased overall, while levels of proteins and most amino acids decreased in response to larval feeding. Twenty-three amino acids were consistently detected in the foliage of black ash. The three most abundant amino acids were aspartic acid, glutamic acid, glutamine, while the four least abundant were α-aminobutyric acid, β-aminoisobutyric acid, methionine, and sarcosine. Most (16) foliar free amino acids and 6 of the 9 detected essential amino acids decreased with EAB larval feeding. The ecological consequences of these dynamic phytochemical changes on herbivores harbored by ash trees and potential natural enemies of these herbivores are discussed.

  8. Somatic embryogenesis in immature cotyledons of Manchurian ash (Fraxinus mandshurica Rupr.) (United States)

    Somatic embryogenesis was obtained from immature cotyledon explants that were cultured on half-strength Murashige and Skoog (MS) salts and vitamins with 5.4 uM naphthaleneacetic acid (NAA) and 0.2 uM thidiazuron (TDZ) plus a 4x4 factorial combination of 0,9.8, 34.6, or 49.2 uM indole-3-butyric acid ...

  9. Preimaginal stages of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae: an invasive pest on ash trees (Fraxinus.

    Directory of Open Access Journals (Sweden)

    M Lourdes Chamorro

    Full Text Available This study provides the most detailed description of the immature stages of Agrilus planipennis Fairmaire to date and illustrates suites of larval characters useful in distinguishing among Agrilus Curtis species and instars. Immature stages of eight species of Agrilus were examined and imaged using light and scanning electron microscopy. For A. planipennis all preimaginal stages (egg, instars I-IV, prepupa and pupa were described. A combination of 14 character states were identified that serve to identify larvae of A. planipennis. Our results support the segregation of Agrilus larvae into two informal assemblages based on characters of the mouthparts, prothorax, and abdomen: the A. viridis and A. ater assemblages, with A. planipennis being more similar to the former. Additional evidence is provided in favor of excluding A. planipennis from the subgenus Uragrilus.

  10. Effects of host plant and larval density on intraspecific competition in larvae of the emerald ash borer (Coleoptera: Buprestidae). (United States)

    Duan, Jian J; Larson, Kristi; Watt, Tim; Gould, Juli; Lelito, Jonathan P


    Competition for food, mates, and space among different individuals of the same insect species can affect density-dependent regulation of insect abundance or population dynamics. The emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), is a serious invasive pest of North American ash (Fraxinus spp.) trees, with its larvae feeding in serpentine galleries between the interface of sapwood and phloem tissues of ash trees. Using artificial infestation of freshly cut logs of green ash (Fraxinus pennsylvanica Marshall) and tropical ash (Fraxinus uhdei [Wenzig] Lingelsh) with a series of egg densities, we evaluated the mechanism and outcome of intraspecific competition in larvae of A. planipennis in relation to larval density and host plant species. Results from our study showed that as the egg densities on each log (1.5-6.5 cm in diameter and 22-25 cm in length) increased from 200 to 1,600 eggs per square meter of surface area, larval survivorship declined from ≍68 to 10% for the green ash logs, and 86 to 55% for tropical ash logs. Accordingly, larval mortality resulting from cannibalism, starvation, or both, significantly increased as egg density increased, and the biomass of surviving larvae significantly decreased on both ash species. When larval density was adjusted to the same level, however, larval mortality from intraspecific competition was significantly higher and mean biomasses of surviving larvae was significantly lower in green ash than in tropical ash. The role of intraspecific competition of A. planipennis larvae in density-dependent regulation of its natural population dynamics is discussed.

  11. Biology and damage traits of emerald ash borer (Agrilus planipennis Fairmaire) in China

    Institute of Scientific and Technical Information of China (English)



    Emerald ash borer (Agrilusplanipennis Fairmaire)(Coleoptera: Buprestidae) is a major stem borer of ash (Fraxinus spp.). It is univoltine in Tianjin, while it is semivoltine in Heilongjiang Province, and both univoltine and semivoltine in Changchun, Jilin Province,where the majority is univoltine. The longevity of emerald ash borer adults is 17.2 ± 4.6 days (n = 45), eggs 9.0 ± 1.1 days (n = 103), univoltine larvae 308 days, semivoltine larvae 673 days, and pupae 61.2± 1.6 days (n = 45). It takes about 100 days from the time larvae bore into the phloem to when they complete the pupal cell. In a 10-year-old velvet ash (Fraxinus velutina Torr.) plantation in Tianjin, emerald ash borer preferred to oviposit on the regions of boles from 50-150 cm above ground, accounting for 76.7% of the total girdling.Girdling on the south side of the tree boles accounted for 43.40% of the total girdling. The emerald ash borer population density is higher at the edge of the plantation compared with the center.

  12. Influence of trap placement and design on capture of the emerald ash borer (Coleoptera: Buprestidae). (United States)

    Francese, Joseph A; Oliver, Jason B; Fraser, Ivich; Lance, David R; Youssef, Nadeer; Sawyer, Alan J; Mastro, Victor C


    The key to an effective pest management program for the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera Buprestidae), is a survey program equipped with tools for detecting and delimiting populations. We studied the effects of trap design, color, and placement on the efficacy of sticky traps for capturing the emerald ash borer. There were significant differences in trap catch along a transect gradient from wooded to open field conditions, with most beetles being caught along the edge, or in open fields, 15-25 m outside an ash (Fraxinus spp. L.) (Oleaceae) woodlot. Greater emerald ash borer catch occurred on purple traps than on red or white traps. Traps placed in the mid-canopy of ash trees (13 m) caught significantly more beetles than those placed at ground level. We also describe a new trap design, a three-sided prism trap, which is relatively easy to assemble and deploy.

  13. Occurrence of emerald ash borer (Coleoptera: Buprestidae) and biotic factors affecting its immature stages in the Russian Far East. (United States)

    Duan, Jian J; Yurchenko, Galina; Fuester, Roger


    Field surveys were conducted from 2008 to 2011 in the Khabarovsk and Vladivostok regions of Russia to investigate the occurrence of emerald ash borer, Agrilus planipennis Fairmaire, and mortality factors affecting its immature stages. We found emerald ash borer infesting both introduced North American green ash (Fraxinus pennsylvanica Marshall) and native oriental ashes (F. mandshurica Rupr. and F. rhynchophylla Hance) in both regions. Emerald ash borer densities (larvae/m(2) of phloem area) were markedly higher on green ash (11.3-76.7 in the Khabarovsk area and 77-245 in the Vladivostok area) than on artificially stressed Manchurian ash (2.2) or Oriental ash (10-59). Mortality of emerald ash borer larvae caused by different biotic factors (woodpecker predation, host plant resistance and/or undetermined diseases, and parasitism) varied with date, site, and ash species. In general, predation of emerald ash borer larvae by woodpeckers was low. While low rates (3-27%) of emerald ash borer larval mortality were caused by undetermined biotic factors on green ash between 2009 and 2011, higher rates (26-95%) of emerald ash borer larval mortality were caused by putative plant resistance in Oriental ash species in both regions. Little (emerald ash borer larvae was observed in Khabarovsk; however, three hymenopteran parasitoids (Spathius sp., Atanycolus nigriventris Vojnovskaja-Krieger, and Tetrastichus planipennisi Yang) were observed attacking third - fourth instars of emerald ash borer in the Vladivostok area, parasitizing 0-8.3% of emerald ash borer larvae infesting Oriental ash trees and 7.3-62.7% of those on green ash trees (primarily by Spathius sp.) in two of the three study sites. Relevance of these findings to the classical biological control of emerald ash borer in newly invaded regions is discussed.

  14. Distinguishing defensive characteristics in the phloem of ash species resistant and susceptible to emerald ash borer. (United States)

    Cipollini, Don; Wang, Qin; Whitehill, Justin G A; Powell, Jeff R; Bonello, Pierluigi; Herms, Daniel A


    We examined the extent to which three Fraxinus cultivars and a wild population that vary in their resistance to Emerald Ash Borer (EAB) could be differentiated on the basis of a suite of constitutive chemical defense traits in phloem extracts. The EAB-resistant Manchurian ash (F. mandshurica, cv. Mancana) was characterized by having a rapid rate of wound browning, a high soluble protein concentration, low trypsin inhibitor activities, and intermediate levels of peroxidase activity and total soluble phenolic concentration. The EAB-susceptible white ash (F. americana, cv. Autumn Purple) was characterized by a slow wound browning rate and low levels of peroxidase activity and total soluble phenolic concentrations. An EAB-susceptible green ash cultivar (F. pennsylvanica, cv. Patmore) and a wild accession were similar to each other on the basis of several chemical defense traits, and were characterized by high activities of peroxidase and trypsin inhibitor, a high total soluble phenolic concentration, and an intermediate rate of wound browning. Lignin concentration and polyphenol oxidase activities did not differentiate resistant and susceptible species. Of 33 phenolic compounds separated by HPLC and meeting a minimum criterion for analysis, nine were unique to Manchurian ash, five were shared among all species, and four were found in North American ashes and not in the Manchurian ash. Principal components analysis revealed clear separations between Manchurian, white, and green ashes on the basis of all phenolics, as well as clear separations on the basis of quantities of phenolics that all species shared. Variation in some of these constitutive chemical defense traits may contribute to variation in resistance to EAB in these species.

  15. Failure to phytosanitize ash firewood infested with emerald ash borer in a small dry kiln using ISPM-15 standards. (United States)

    Goebel, P Charles; Bumgardner, Matthew S; Herms, Daniel A; Sabula, Andrew


    Although current USDA-APHIS standards suggest that a core temperature of 71.1 degrees C (160 degrees F) for 75 min is needed to adequately sanitize emerald ash borer, Agrilus planipennis Fairmaire-infested firewood, it is unclear whether more moderate (and economical) treatment regimes will adequately eradicate emerald ash borer larvae and prepupae from ash firewood. We constructed a small dry kiln in an effort to emulate the type of technology a small- to medium-sized firewood producer might use to examine whether treatments with lower temperature and time regimes successfully eliminate emerald ash borer from both spilt and roundwood firewood. Using white ash (Fraxinus americana L.) firewood collected from a stand with a heavy infestation of emerald ash borer in Delaware, OH, we treated the firewood using the following temperature and time regime: 46 degrees C (114.8 degrees F) for 30 min, 46 degrees C (114.8 degrees F) for 60 min, 56 degrees C (132.8 degrees F) for 30 min, and 56 degrees C (132.8 degrees F) for 60 min. Temperatures were recorded for the outer 2.54-cm (1-in.) of firewood. After treatment, all firewood was placed under mesh netting and emerald ash borer were allowed to develop and emerge under natural conditions. No treatments seemed to be successful at eliminating emerald ash borer larvae and perpupae as all treatments (including two nontreated controls) experienced some emerald ash borer emergence. However, the 56 degrees C (132.8 degrees F) treatments did result in considerably less emerald ash borer emergence than the 46 degrees C (114.8 degrees F) treatments. Further investigation is needed to determine whether longer exposure to the higher temperature (56 degrees C) will successfully sanitize emerald ash borer-infested firewood.

  16. Relationships between root respiration rate and root morphology, chemistry and anatomy in Larix gmelinii and Fraxinus mandshurica. (United States)

    Jia, Shuxia; McLaughlin, Neil B; Gu, Jiacun; Li, Xingpeng; Wang, Zhengquan


    Tree roots are highly heterogeneous in form and function. Previous studies revealed that fine root respiration was related to root morphology, tissue nitrogen (N) concentration and temperature, and varied with both soil depth and season. The underlying mechanisms governing the relationship between root respiration and root morphology, chemistry and anatomy along the root branch order have not been addressed. Here, we examined these relationships of the first- to fifth-order roots for near surface roots (0-10 cm) of 22-year-old larch (Larix gmelinii L.) and ash (Fraxinus mandshurica L.) plantations. Root respiration rate at 18 °C was measured by gas phase O2 electrodes across the first five branching order roots (the distal roots numbered as first order) at three times of the year. Root parameters of root diameter, specific root length (SRL), tissue N concentration, total non-structural carbohydrates (starch and soluble sugar) concentration (TNC), cortical thickness and stele diameter were also measured concurrently. With increasing root order, root diameter, TNC and the ratio of root TNC to tissue N concentration increased, while the SRL, tissue N concentration and cortical proportion decreased. Root respiration rate also monotonically decreased with increasing root order in both species. Cortical tissue (including exodermis, cortical parenchyma and endodermis) was present in the first three order roots, and cross sections of the cortex for the first-order root accounted for 68% (larch) and 86% (ash) of the total cross section of the root. Root respiration was closely related to root traits such as diameter, SRL, tissue N concentration, root TNC : tissue N ratio and stele-to-root diameter proportion among the first five orders, which explained up to 81-94% of variation in the rate of root respiration for larch and up to 83-93% for ash. These results suggest that the systematic variations of root respiration rate within tree fine root system are possibly due to the

  17. Ecophysiological Competence of Populus alba L., Fraxinus angustifolia Vahl., and Crataegus monogyna Jacq. Used in Plantations for the Recovery of Riparian Vegetation (United States)

    Manzanera, Jose A.; Martínez-Chacón, Maria F.


    In many semi-arid environments of Mediterranean ecosystems, white poplar ( Populus alba L.) is the dominant riparian tree and has been used to recover degraded areas, together with other native species, such as ash ( Fraxinus angustifolia Vahl.) and hawthorn ( Crataegus monogyna Jacq.). We addressed three main objectives: (1) to gain an improved understanding of some specific relationships between environmental parameters and leaf-level physiological factors in these riparian forest species, (2) to compare the leaf-level physiology of these riparian species to each other, and (3) to compare leaf-level responses within native riparian plots to adjacent restoration plots, in order to evaluate the competence of the plants used for the recovery of those degraded areas. We found significant differences in physiological performance between mature and young white poplars in the natural stand and among planted species. The net assimilation and transpiration rates, diameter, and height of white poplar plants were superior to those of ash and hawthorn. Ash and hawthorn showed higher water use efficiency than white poplar. White poplar also showed higher levels of stomatal conductance, behaving as a fast-growing, water-consuming species with a more active gas exchange and ecophysiological competence than the other species used for restoration purposes. In the restoration zones, the planted white poplars had higher rates of net assimilation and water use efficiency than the mature trees in the natural stand. We propose the use of white poplar for the rapid restoration of riparian vegetation in semi-arid Mediterranean environments. Ash and hawthorn can also play a role as accompanying species for the purpose of biodiversity.

  18. Spectral analysis of white ash response to emerald ash borer infestations (United States)

    Calandra, Laura

    The emerald ash borer (EAB) (Agrilus planipennis Fairmaire) is an invasive insect that has killed over 50 million ash trees in the US. The goal of this research was to establish a method to identify ash trees infested with EAB using remote sensing techniques at the leaf-level and tree crown level. First, a field-based study at the leaf-level used the range of spectral bands from the WorldView-2 sensor to determine if there was a significant difference between EAB-infested white ash (Fraxinus americana) and healthy leaves. Binary logistic regression models were developed using individual and combinations of wavelengths; the most successful model included 545 and 950 nm bands. The second half of this research employed imagery to identify healthy and EAB-infested trees, comparing pixel- and object-based methods by applying an unsupervised classification approach and a tree crown delineation algorithm, respectively. The pixel-based models attained the highest overall accuracies.

  19. Complex Ornament Machining Process on a CNC Router




    The paper investigates the CNC routering possibilities for three species of wood, namely ash (Fraxinus Excelsior), lime wood (Tilia cordata) and fir wood (Abies Alba), in order to obtain right surfaces of Art Nouveau sculptured ornaments. Given the complexity of the CNC tool path for getting wavy shapes of Art Nouveau decorations, the choice of processing parameters for each processed species of wood requires a laborious research work to correlate these parameters. Two Art Nou...

  20. The structure of integument and wax glands of Phenacoccus fraxinus (Hemiptera: Coccoidea: Pseudococcidae)%The structure of integument and wax glands of Phenacoccus fraxinus (Hemiptera:Coccoidea:Pseudococcidae)

    Institute of Scientific and Technical Information of China (English)

    Yanfeng ZHANG; Yingping XIE; Jiaoliang XUE; Xiaohong FU; Weimin LIU


    Using scanning electron microscopy and optical microscopy,we studied the structure of the integument and wax glands of the mealybug,Phenacoccus fraxinus Tang (Hemiptera:Coccoidea:Pseudococcidae).We observed the ultrastructure of four wax pores including trilocular,quinquelocular,and multilocular pores as well as tubular ducts,recording characteristics of their structure,size and distribution.We found that that the integument of the mealybug consists of three main layers—the procuticle,epidermis and basement membrane—and four sub-layers of the procuticle—the epicuticle,exocuticle,endocuticle and formation zone.The waxsecreting gland cells were closely arranged in epidermis.All of them were complex and composed of one central cell and two or more lateral cells.These complex cells possess a large common reservoir for collection and storage.Synthesized by the glandular cells,the wax is excreted outside integument through canals.

  1. Interactive influence of leaf age, light intensity, and girdling on green ash foliar chemistry and emerald ash borer development. (United States)

    Chen, Yigen; Poland, Therese M


    Biotic and abiotic environmental factors affect plant nutritional quality and defensive compounds that confer plant resistance to herbivory. Influence of leaf age, light availability, and girdling on foliar nutrition and defense of green ash (Fraxinus pennsylvanica Marsh) was examined in this study. Longevity of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), adults reared on green ash foliage subjected to these factors was assayed. Mature leaves generally were more nutritious with greater amino acids and a greater ratio of protein to non-structural carbohydrate (P:C) than young leaves, in particular when trees were grown in shade. On the other hand, mature leaves had lower amounts of trypsin and chymotrypsin inhibitors, and total phenolics compared to young leaves. Lower defense of mature leaves alone, or along with higher nutritional quality may lead to increased survival and longevity of emerald ash borer feeding on mature leaves. Sunlight reduced amino acids and P:C ratio, irrespective of leaf age and girdling, and elevated total protein of young foliage, but not protein of mature leaves. Sunlight also dramatically increased all investigated defensive compounds of young, but not mature leaves. Girdling reduced green ash foliar nutrition, especially, of young leaves grown in shade and of mature leaves grown in sun. However emerald ash borer performance did not differ when fed leaves from trees grown in sun or shade, or from girdled or control trees. One explanation is that emerald ash borer reared on lower nutritional quality food may compensate for nutrient deficiency by increasing its consumption rate. The strong interactions among leaf age, light intensity, and girdling on nutrition and defense highlight the need for caution when interpreting data without considering possible interactions.

  2. Effects of trap type, placement and ash distribution on emerald ash borer captures in a low density site. (United States)

    McCullough, Deborah G; Siegert, Nathan W; Poland, Therese M; Pierce, Steven J; Ahn, Su Zie


    Effective methods for early detection of newly established, low density emerald ash borer (Agrilus planipennis Fairmaire) infestations are critically needed in North America. We assessed adult A. planipennis captures on four types of traps in a 16-ha site in central Michigan. The site was divided into 16 blocks, each comprised of four 50- by 50-m cells. Green ash trees (Fraxinus pennsylvanica Marshall) were inventoried by diameter class and ash phloem area was estimated for each cell. One trap type was randomly assigned to each cell in each block. Because initial sampling showed that A. planipennis density was extremely low, infested ash logs were introduced into the center of the site. In total, 87 beetles were captured during the summer. Purple double-decker traps baited with a blend of ash leaf volatiles, Manuka oil, and ethanol captured 65% of all A. planipennis beetles. Similarly baited, green double-decker traps captured 18% of the beetles, whereas sticky bands on girdled trees captured 11% of the beetles. Purple traps baited with Manuka oil and suspended in the canopies of live ash trees captured only 5% of the beetles. At least one beetle was captured on 81% of the purple double-decker traps, 56% of the green double-decker traps, 42% of sticky bands, and 25% of the canopy traps. Abundance of ash phloem near traps had no effect on captures and trap location and sun exposure had only weak effects on captures. Twelve girdled and 29 nongirdled trees were felled and sampled in winter. Current-year larvae were present in 100% of the girdled trees and 72% of the nongirdled trees, but larval density was five times higher on girdled than nongirdled trees.

  3. Spatial distribution of fine roots of larch and ash in the mixed plantation stand

    Institute of Scientific and Technical Information of China (English)


    The spatial distribution of standing fine roots in tree rows of different species in a 12-year-old mixed stand of ash (Fraxinus mandshurica Rupr.) and larch (Larix olgensis Henry) was studied by soil core sampling in early spring, 2001. It is found that ash and larch differ greatly in their belowground biomass distribution. Ash has much higher fine root biomass density in the soil than l arch at stand level (with the max value of 4442.3 vs. 2234.9 g@m-3). Both tree species deployed more fine roots in their neighboring zone, suggesting a less in tensive competition between roots of the two species. Both fine root biomass den sity and root length density of ash in the zone between larch tree rows are greater than that of larch in zone between ash tree rows, indicating that ash is more powerful than larch in belowground competition. The spatial distribution feature of roots favors the growth of ash in the mixed stand.

  4. Progress and gaps in understanding mechanisms of ash tree resistance to emerald ash borer, a model for wood-boring insects that kill angiosperms. (United States)

    Villari, Caterina; Herms, Daniel A; Whitehill, Justin G A; Cipollini, Don; Bonello, Pierluigi


    We review the literature on host resistance of ash to emerald ash borer (EAB, Agrilus planipennis), an invasive species that causes widespread mortality of ash. Manchurian ash (Fraxinus mandshurica), which coevolved with EAB, is more resistant than evolutionarily naïve North American and European congeners. Manchurian ash was less preferred for adult feeding and oviposition than susceptible hosts, more resistant to larval feeding, had higher constitutive concentrations of bark lignans, coumarins, proline, tyramine and defensive proteins, and was characterized by faster oxidation of phenolics. Consistent with EAB being a secondary colonizer of coevolved hosts, drought stress decreased the resistance of Manchurian ash, but had no effect on constitutive bark phenolics, suggesting that they do not contribute to increased susceptibility in response to drought stress. The induced resistance of North American species to EAB in response to the exogenous application of methyl jasmonate was associated with increased bark concentrations of verbascoside, lignin and/or trypsin inhibitors, which decreased larval survival and/or growth in bioassays. This finding suggests that these inherently susceptible species possess latent defenses that are not induced naturally by larval colonization, perhaps because they fail to recognize larval cues or respond quickly enough. Finally, we propose future research directions that would address some critical knowledge gaps.

  5. Decreased emergence of emerald ash borer from ash treated with methyl jasmonate is associated with induction of general defense traits and the toxic phenolic compound verbascoside. (United States)

    Whitehill, Justin G A; Rigsby, Chad; Cipollini, Don; Herms, Daniel A; Bonello, Pierluigi


    The emerald ash borer (EAB; Agrilus planipennis Fairmaire) is causing widespread mortality of ash (Fraxinus spp.) in North America. To date, no mechanisms of host resistance have been identified against this pest. Methyl jasmonate was applied to susceptible North American and resistant Asian ash species to determine if it can elicit induced responses in bark that enhance resistance to EAB. In particular, phenolic compounds, lignin, and defense-related proteins were quantified, and compounds associated with resistance were subsequently tested directly against EAB larvae in bioassays with artificial diet. MeJA application decreased adult emergence in susceptible ash species, comparable to levels achieved by insecticide application. Concentration of the phenolic compound verbascoside sharply increased after MeJA application to green and white ash. When incorporated in an artificial diet, verbascoside decreased survival and growth of EAB neonates in a dose-dependent fashion. Lignin and trypsin inhibitors were also induced by MeJA, and analogs of both compounds reduced growth of EAB larvae in artificial diets. We conclude that the application of MeJA prior to EAB attack has the ability to enhance resistance of susceptible ash trees by inducing endogenous plant defenses, and report evidence that induction of verbascoside is a mechanism of resistance to EAB.

  6. Biology, life history, and laboratory rearing of Spathius galinae (Hymenoptera: Braconidae), a larval parasitoid of the invasive emerald ash borer (Coleoptera: Buprestidae). (United States)

    Duan, Jian J; Watt, Timothy J; Larson, Kristi


    Spathius galinae Belokobylskij & Strazanac is a recently described parasitoid of the emerald ash borer, Agrilus planipennis Fairmaire, in the Russian Far East, and is currently being considered for biocontrol introduction in the United States. Using A. planipennis larvae reared with freshly cut ash (Fraxinus spp.) sticks, we investigated the biology, life cycle, and rearing of S. galinae in the laboratory under normal rearing conditions (25 +/- 1 degrees C, 65 +/- 10% relative humidity, and a photoperiod of 16:8 [L:D] h). Our study showed that S. galinae took approximately 1 mo (29 d) to complete a single generation (from egg to adult) under the laboratory rearing conditions. After eclosion from eggs, larvae of S. galinae molted four times to reach the fifth instar, which then spun cocoons for pupation and development to adults. Adult female wasps had a median survival time of 7 wk with fecundity peaking 3 wk after emergence when reared in groups (of five females and five males) and 2 wk in single pairs. Throughout the life span, a single female S. galinae produced a mean (+/- SE) of 31 (+/- 3.0) progeny when reared in groups, and a mean (+/- SE) of 47 (+/- 5.3) progeny when reared in single pairs. Results from our study also showed that S. galinae could be effectively reared with A. planipennis larvae reared in both green (Fraxinus pennsylvanica Marshall) and tropical [Fraxinus uhdei (Wenzig) Lingelsh] ash sticks. However, the abortion (unemergence) rate of S. galinae progeny was much higher (20%) when reared with host larvae in green ash sticks than that (2.1%) in tropical ash sticks.

  7. Growth simulation of Fraxinus chinensis stands damaged by Hyphandria cunea in Beijing area

    Institute of Scientific and Technical Information of China (English)

    BAO Ting-fang; LUO Youqing; XU Zhi-chun; SHI Juan; LIU Yu


    Hyphandria cunea is an insect that can damage hundreds of plants in its larval phase and needs to be placed under quarantine at an international level. Its hosts involve 600 plant species, including forest and fruit trees, shrubs, crops, vegetables, weeds and others. In 2006, we surveyed two Fraxinus chinensis Roxb stands, damaged to different degrees, after the invasion of H. cunea in the Changping district of the Beijing area. Given our survey of individual trees and investigation of bio-environmental factors, we provide a preliminarily simulation of the growth situation of F. chinensis stands, damaged by H. cunea, by using the Forest Vegetation Simulator software (FVS), which is supported by the "948" project from the State Forestry Administration of China. The results will provide a valuable reference in foreeasting the effect of H. cunea and other invasive pests in China on forest ecological values.

  8. The structure of integument and wax glands of Phenacoccus fraxinus (Hemiptera: Coccoidea: Pseudococcidae). (United States)

    Zhang, Yanfeng; Xie, Yingping; Xue, Jiaoliang; Fu, Xiaohong; Liu, Weimin


    Using scanning electron microscopy and optical microscopy, we studied the structure of the integument and wax glands of the mealybug, Phenacoccus fraxinus Tang (Hemiptera: Coccoidea: Pseudococcidae). We observed the ultrastructure of four wax pores including trilocular, quinquelocular, and multilocular pores as well as tubular ducts, recording characteristics of their structure, size and distribution. We found that that the integument of the mealybug consists of three main layers-the procuticle, epidermis and basement membrane-and four sub-layers of the procuticle-the epicuticle, exocuticle, endocuticle and formation zone. The wax-secreting gland cells were closely arranged in epidermis. All of them were complex and composed of one central cell and two or more lateral cells. These complex cells possess a large common reservoir for collection and storage. Synthesized by the glandular cells, the wax is excreted outside integument through canals.

  9. Post-planting treatments and shading effects in a Fraxinus angustifolia Vahl. silvopastoral system

    Directory of Open Access Journals (Sweden)

    Giorgos Klossas


    Full Text Available Silvopastoral systems present difficulties in their management due to their complexity. When trees are planted into grasslands, they need protection from livestock to prevent damage from trampling or browsing, especially during early years of establishment. One of the common post-planting protective treatments is the protection of individual trees with shelters. Trees also need protection from competition from herbaceous vegetation. The aim of present study was to evaluate the effects of using different types of tree shelters and of controlling competing herbaceous vegetation on the growth of planted young trees and, to assess the effects of heavy shading on the herbage production and composition. The study was conducted in a Fraxinus angustifolia silvopastoral system of a 2 x 2.5 m spacing plantation in northern Greece. The effects of solid-walled (tubex and handmade by greenhouse nylon and wire mesh tree shelters as well as of herbicide application and mechanical removal of the competing herbaceous vegetation on tree height, height increment and the crown surface area of the trees were tested. The effects of artificial shading (80% on the production of the natural herbaceous vegetation were also investigated. All measurements were recorded three years after plantation. The use of solid wall tubex shelters resulted in higher tree height and higher crown surface area in comparison to the other tested shelters. The solid wall Nylon shelters were more beneficial to the above growth parameters than the wire mesh ones. Both vegetation control treatments proved beneficial to all the growth parameters of Fraxinus angustifolia. The artificially applied heavy shading reduced herbage production by 54% compared to the control. The results indicated that post planting treatments in the Mediterranean droughty conditions are essential for the success of this tree species establishment. Furthermore, the later thinning of the dense spacing is important to

  10. Effectiveness of differing trap types for the detection of emerald ash borer (Coleoptera: Buprestidae). (United States)

    Marshall, Jordan M; Storer, Andrew J; Fraser, Ivich; Beachy, Jessica A; Mastro, Victor C


    The early detection of populations of a forest pest is important to begin initial control efforts, minimizing the risk of further spread and impact. Emerald ash borer (Agrilus planipennis Fairmaire) is an introduced pestiferous insect of ash (Fraxinus spp. L.) in North America. The effectiveness of trapping techniques, including girdled trap trees with sticky bands and purple prism traps, was tested in areas with low- and high-density populations of emerald ash borer. At both densities, large girdled trap trees (>30 cm diameter at breast height [dbh], 1.37 m in height) captured a higher rate of adult beetles per day than smaller trees. However, the odds of detecting emerald ash borer increased as the dbh of the tree increased by 1 cm for trap trees 15-25 cm dbh. Ash species used for the traps differed in the number of larvae per cubic centimeter of phloem. Emerald ash borer larvae were more likely to be detected below, compared with above, the crown base of the trap tree. While larval densities within a trap tree were related to the species of ash, adult capture rates were not. These results provide support for focusing state and regional detection programs on the detection of emerald ash borer adults. If bark peeling for larvae is incorporated into these programs, peeling efforts focused below the crown base may increase likelihood of identifying new infestations while reducing labor costs. Associating traps with larger trees ( approximately 25 cm dbh) may increase the odds of detecting low-density populations of emerald ash borer, possibly reducing the time between infestation establishment and implementing management strategies.

  11. Simulated Impacts of Emerald Ash Borer on Throughfall and Stemflow Inputs of Water and Nitrogen in Black Ash Wetlands in Northern Michigan (United States)

    Pypker, T. G.; Davis, J.; Van Grinsven, M. J.; Bolton, N. W.; Shannon, J.; Kolka, R. K.; Nelson, J.; Wagenbrenner, J. W.


    Emerald ash borer (Agrilus planipennis Fairmaire (EAB)) is an invasive insect that effectively kills ash trees (genus: Fraxinus) greater than 2.5 cm in diameter, resulting in near-complete stand mortality within 3-4 years. Black ash wetlands occupy approximately 270,000 ha in Michigan, and have 40 to 90% of the basal area occupied by black ash (F. nigra Marshall); hence the loss of black ash may result in dramatic changes in the canopy hydrology and nutrient deposition. We assessed the impact of a simulated EAB invasion on throughfall and stemflow quantity and nitrogen (N) content in 9 uninfected black ash wetlands located in the Upper Peninsula of Michigan. Within the 9 stands, 3 stands were left untreated ('Control'), 3 stands had all the black ash trees manually girdled ('Girdled') and 3 had all the black ash trees felled by chainsaw ('Clearcut'). We measured the quantity and inorganic-N content of throughfall using an array of randomly placed collectors (n = 16 per site). Stemflow was monitored at 2 sites (n = 12 trees) on the 3 most common tree species (black ash, yellow birch (Betula alleghaniensis Britt.) and red maple (Acer rubra L.)). Preliminary results indicate that relative to the Control, average monthly throughfall was 25% and 1% greater in the Clearcut and Girdled sites, respectively. While the loss of the ash trees resulted in greater throughfall inputs in the Clearcut sites, water table heights did not significantly change as a result of the treatments. Stemflow from live black ash trees was lower than from the yellow birch and red maple trees. As a result, we predict stemflow will increase over time as species with smoother bark and less upright branching begin replacing the black ash. Hence, the change in tree species may result in a greater concentration of inorganic-N inputs to the base of the trees, thereby altering the distribution of inorganic-N inputs into the wetland. Our preliminary results show no significant change in the total

  12. Fraxinus paxiana bark mediated photosynthesis of silver nanoparticles and their size modulation using swift heavy ion irradiation (United States)

    Sharma, Hemant; Vendamani, V. S.; Pathak, Anand P.; Tiwari, Archana


    Photosynthesis of silver nanoparticles is presented using bark extracts of Fraxinus paxiana var. sikkimensis. The synthesized nanoparticles are characterised by UV-Vis absorption, photoluminescence, powder X-ray diffraction and scanning and transmission electron microscopy. In addition, the bark samples are irradiated with 100 MeV silver ions and the subsequent structural modifications are analyzed. The swift heavy ion irradiated Fraxinus paxiana var. sikkimensis bark is also used for the synthesis of silver nanoparticles. It is illustrated that the irradiated bark assists in synthesizing smaller nanoparticles of homogenous size distribution as compared to when the pristine bark is used. The newly synthesized silver nanoparticles are also used to demonstrate the antimicrobial activities on Escherichia coli bacteria.

  13. [Ash Meadows Purchase Proposal (United States)

    US Fish and Wildlife Service, Department of the Interior — A proposal sent to the Richard King Mellon Foundation for a loan to fund the purchase of Ash Meadows by the Nature Conservancy. Ash Meadows, set outside of Las Vegas...

  14. The biology and ecology of the emerald ash borer, Agrilus planipennis, in China. (United States)

    Wang, Xiao-Yi; Yang, Zhong-Qi; Gould, Juli R; Zhang, Yi-Nan; Liu, Gui-Jun; Liu, En-shan


    The biology, ecology, and life cycle of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), were studied using regular inspection in the forest and observations in the laboratory. Results indicated that A. planipennis are mostly univoltine in Tianjin, China. They overwintered individually as mature larvae in shallow chambers excavated in the outer sapwood. In late July, some full-grown larvae began to build overwintering chambers, and all larvae entered the sapwood for dormancy by early November. A. planipennis pupated in the overwintering chamber from early April to mid May the following year, and the average pupal duration was about 20 days. In late April, some newly eclosed adults could be found in the pupal cells, but they had not yet emerged from the tree. Adults began to emerge in early May, with peak flight occurring in mid May. The average longevity of adults was about 21 days and the adult stage lasted through early July. The adults fed on ash foliage as a source of nutrition. Mating was usually conducted and completed on the leaf or trunk surfaces of ash trees. Oviposition began in mid May and eggs hatched on average in 15.7 days. The first instar larvae appeared in early June. The larval stage lasted about 300 days to complete an entire generation. The emerald ash borer had four larval instars on velvet ash, Fraxinus velutina (Scrophulariales: Oleaceae). The major natural control factors of A. planipennis were also investigated, and preliminary suggestions for its integrated management are proposed.

  15. Stenhammer, Wilhelm. sinfonien Nr. 1 F-Dur und Nr. 2 g-Moll op. 34, Excelsior! op. 13, Serenade F-Dur op. 31. Sinfonieorchester Göteborg, Neeme Järvi / Andreas K. W. Meyer

    Index Scriptorium Estoniae

    Meyer, Andreas K. W.


    Uuest heliplaadist "Stenhammer, Wilhelm. sinfonien Nr. 1 F-Dur und Nr. 2 g-Moll op. 34, Excelsior! op. 13, Serenade F-Dur op. 31. Sinfonieorchester Göteborg, Neeme Järvi". DG 2 CD 445857-2 (WD: 138'37")

  16. Airborne pollen of Carya, Celtis, Cupressus, Fraxinus and Pinus in the metropolitan area of Monterrey Nuevo Leon, Mexico. (United States)

    Rocha-Estrada, Alejandra; Alvarado-Vázquez, Marco Antonio; Torres-Cepeda, Teresa Elizabeth; Foroughbakhch-Pournavab, Rahim; Hernández-Piñero, Jorge Luis


    The concentration of pollen grains in the atmosphere over the metropolitan area of Monterrey, Nuevo Leon, Mexico, was analyzed throughout a year from March 2003-February 2004, focused on the genus Carya, Celtis, Cupressus, Fraxinus and Pinus owing to their interest as etiological pollinosis agents in diverse regions of the world. A 7-day Hirst type volumetric spore and pollen trap was located on a building roof of the city at 15 m from ground level for continuous sampling. The total quantity of pollen recorded for the study period was 21,083 grains/m(3), corresponding to 49.75 % of the taxa of interest. February and March were the months with higher pollen amounts in the air with 7,525 and 2,781 grains/m(3), respectively, and amounted to 49 % of total year through pollen. Fraxinus was the genus which contributed to the largest amount of pollen with 28 % of total grains (5,935 grains/m(3)) followed by Cupressus with 13 % (2,742 grains/ m(3)). Celtis, Pinus and Carya contributed with 5.3 % , 2.7 % , and 0.6 % of total pollen, respectively. These results indicate that Fraxinus and Cupressus are present in the area in sufficient quantity to indicate likely involvement in the origin of allergic disorders in the human population.

  17. Effects of ambient temperature on egg and larval development of the invasive emerald ash borer (Coleoptera: Buprestidae): implications for laboratory rearing. (United States)

    Duan, Jian J; Watt, Tim; Taylor, Phil; Larson, Kristi; Lelito, Jonathan P


    The emerald ash borer, Agrilus planipennis Fairmaire, an invasive beetle from Asia causing large scale ash (Fraxinus) mortality in North America, has been extremely difficult to rear in the laboratory because of its long life cycle and cryptic nature of immature stages. This lack of effective laboratory-rearing methods has not only hindered research into its biology and ecology, but also mass production of natural enemies for biological control of this invasive pest. Using sticks from the alternate host plant, Fraxinus uhdei (Wenzig) Lingelsh, we characterized the stage-specific development time and growth rate of both emerald ash borer eggs and larvae at different constant temperatures (12-35 degrees C) for the purpose of developing effective laboratory-rearing methods. Results from our study showed that the median time for egg hatching decreased from 20 d at 20 degrees C to 7 d at 35 degrees C, while no emerald ash borer eggs hatched at 12 degrees C. The developmental time for 50% of emerald ash borer larvae advancing to third, fourth, and J-larval stages at 20 degrees C were 8.3, 9.1, and 12.3 wk, respectively, approximately two times longer than at 30 degrees C for the corresponding instars or stages. In contrast to 30 degrees C, however, the development times of emerald ash borer larvae advancing to later instars (from oviposition) were significantly increased at 35 degrees C, indicating adverse effects of this high temperature. The optimal range of ambient temperature to rear emerald ash borer larvae should be between 25-30 degrees C; however, faster rate of egg and larval development should be expected as temperature increases within this range.

  18. Influence of hydrologic modifications on Fraxinus pennsylvanica in the Mississippi River Alluvial Valley, USA (United States)

    Gee, Hugo K.W.; King, Sammy L.; Keim, Richard F.


    We used tree-ring analysis to examine radial growth response of a common, moderately flood-tolerant species (Fraxinus pennsylvanica Marshall) to hydrologic and climatic variability for > 40 years before and after hydrologic modifications affecting two forest stands in the Mississippi River Alluvial Valley (USA): a stand without levees below dams and a stand within a ring levee. At the stand without levees below dams, spring flood stages decreased and overall growth increased after dam construction, which we attribute to a reduction in flood stress. At the stand within a ring levee, growth responded to the elimination of overbank flooding by shifting from being positively correlated with river stage to not being correlated with river stage. In general, growth in swales was positively correlated with river stage and Palmer Drought Severity Index (an index of soil moisture) for longer periods than flats. Growth decreased after levee construction, but swales were less impacted than flats likely because of differences in elevation and soils provide higher soil moisture. Results of this study indicate that broad-scale hydrologic processes differ in their effects on the flood regime, and the effects on growth of moderately flood-tolerant species such as F. pennsylvanica can be mediated by local-scale factors such as topographic position, which affects soil moisture.

  19. Plant growth-promoting rhizobacteria affect the growth and nutrient uptake of Fraxinus americana container seedlings. (United States)

    Liu, Fangchun; Xing, Shangjun; Ma, Hailin; Du, Zhenyu; Ma, Bingyao


    Plant growth-promoting rhizobacteria (PGPR) are important catalysts that regulate the functional properties of agricultural systems. However, there is little information on the effect of PGPR inoculation on the growth and nutrient accumulation of forest container seedlings. This study determined the effects of a growth medium inoculated with PGPR on the nutrient uptake, nutrient accumulation, and growth of Fraxinus americana container seedlings. PGPR inoculation with fertilizer increased the dry matter accumulation of the F. americana aerial parts with delayed seedling emergence time. Under fertilized conditions, the accumulation time of phosphorous (P) and potassium (K) in the F. americana aerial parts was 13 days longer due to PGPR inoculation. PGPR increased the maximum daily P and K accumulations in fertilized seedlings by 9.31 and 10.44 %, respectively, but had little impact on unfertilized ones. Regardless of fertilizer application, the root exudates, namely sugars, amino acids, and organic acids significantly increased because of PGPR inoculation. PGPR inoculation with fertilizer increased the root, shoot, and leaf yields by 19.65, 22.94, and 19.44 %, respectively, as well as the P and K contents by 8.33 and 10.60 %, respectively. Consequently, the N, P, and K uptakes increased by 19.85, 31.97, and 33.95 %, respectively. Hence, PGPR inoculation with fertilizer can be used as a bioenhancer for plant growth and nutrient uptake in forest container seedling nurseries.

  20. Phosphate Availability Alters Lateral Root Anatomy and Root Architecture of Fraxinus mandshurica Rupr. Seedlings

    Institute of Scientific and Technical Information of China (English)

    Chu WU; Xing WEI; Hai-Long SUN; Zheng-Quan WANG


    Plants have evolved some mechanisms to maximize the efficiency of phosphorus acquisition.Changes in root architecture are one such mechanism. When Fraxinus mandshurica Rupr. seedlings were grown under conditions of low phosphorus availability, the length of cells in the meristem zone of the lateral roots was longer, but the length of cells in the elongation and mature zones of the lateral roots was shorter,compared with seedlings grown under conditions of high phosphorus availability. The elongation rates of primary roots increased as phosphorus availability increased, but the elongation rates of the branched zones of the primary roots decreased. The number of lateral root primordia and the length of the lateral roots decreased as phosphorus availability increased. The topological index (altitude slope) decreased as phosphorus availability increased, suggesting that root architecture tended to be herringbone-like when seedlings were grown under conditions of low phosphate availability. Herringbone-like root systems exploit nutrients more efficiently, but they have higher construction costs than root systems with a branching pattern.


    Directory of Open Access Journals (Sweden)

    Lijuan Wang


    Full Text Available Copper coating was deposited on Fraxinus mandshurica veneers for preparing EMI shielding composite by electroless plating using glyoxylic acid as reducing agent in the solution. XPS and SEM were used to analyze the activation process. It was found that a continuous chitosan membrane was loaded on the wood surface. XPS results showed that Pd(II ions were chemically adsorbed on a chitosan membrane on the wood surface through an N-Pd σ coordination bond. After reduction, part of Pd(II absorbed formed very little Pd(0 particles on the chitosan-treated wood surface. The activated wood veneers were immersed into a plating bath in which copper film was successfully initiated. The coatings were characterized by SEM-EDS, XPS, and XRD. The metal deposition, surface resistivity, and electromagnetic shielding effectiveness were measured. The morphology of the coating was uniform, compact, and continuous. The wood grains were preserved on the plated wood veneer, which had a copper-like color and sheen. EDS, XPS, and XRD results indicated that the coating consisted of Cu0 with crystalline structure. The surface resistivity and copper deposition reached 175.14 mΩ•cm-2 and 21.66 g/m2 when the veneer was pretreated with 0.8 % chitosan for 8 min and plated for 30 min at 55 oC. The plated veneers exhibited good electromagnetic shielding effectiveness of over 60 dB in frequency ranging from10 MHz to 1.5 GHz.

  2. Low-temperature methyl bromide fumigation of emerald ash borer (Coleoptera: Buprestidae) in ash logs. (United States)

    Barak, Alan V; Elder, Peggy; Fraser, Ivich


    Ash (Fraxinus spp.) logs, infested with fully developed, cold-acclimated larval and prepupal emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), were fumigated with methyl bromide (MeBr) at 4.4 and 10.0 degrees C for 24 h. Concentrations X time dosages of MeBr obtained were 1579 and 1273 g-h/m3 (24-h exposure) at 4.4 and 10.0 degrees C after applied doses of 112 and 96 g/m3, respectively. MeBr concentrations were simultaneously measured with a ContainIR infrared monitor and Fumiscope thermal conductivity meter calibrated for MeBr to measure the effect of CO2 on Fumiscope concentration readings compared with the infrared (IR) instrument. The presence of CO2 caused false high MeBr readings. With the thermal conductivity meter, CO2 measured 11.36 g/m3 MeBr per 1% CO2 in clean air, whereas the gas-specific infrared ContainIR instrument measured 9.55% CO2 as 4.2 g/m3 MeBr (0.44 g/m3 per 1% CO2). The IR instrument was 0.4% as sensitive to CO2 as the thermal conductivity meter. After aeration, fumigated and control logs were held for 8 wk to capture emerging beetles. No A. planipennis adults emerged from any of the fumigated logs, whereas 262 emerged from control logs (139 and 123/m2 at 4.4 and 10.0 degrees C, respectively). An effective fumigation dose and minimum periodic MeBr concentrations are proposed. The use of a CO2 scrubber in conjunction with nonspecific thermal conductivity instruments is necessary to more accurately measure MeBr concentrations.

  3. Fly ash carbon passivation (United States)

    La Count, Robert B; Baltrus, John P; Kern, Douglas G


    A thermal method to passivate the carbon and/or other components in fly ash significantly decreases adsorption. The passivated carbon remains in the fly ash. Heating the fly ash to about 500 and 800 degrees C. under inert gas conditions sharply decreases the amount of surfactant adsorbed by the fly ash recovered after thermal treatment despite the fact that the carbon content remains in the fly ash. Using oxygen and inert gas mixtures, the present invention shows that a thermal treatment to about 500 degrees C. also sharply decreases the surfactant adsorption of the recovered fly ash even though most of the carbon remains intact. Also, thermal treatment to about 800 degrees C. under these same oxidative conditions shows a sharp decrease in surfactant adsorption of the recovered fly ash due to the fact that the carbon has been removed. This experiment simulates the various "carbon burnout" methods and is not a claim in this method. The present invention provides a thermal method of deactivating high carbon fly ash toward adsorption of AEAs while retaining the fly ash carbon. The fly ash can be used, for example, as a partial Portland cement replacement in air-entrained concrete, in conductive and other concretes, and for other applications.

  4. Targeted and Untargeted Metabolomics to Explore the Bioavailability of the Secoiridoids from a Seed/Fruit Extract (Fraxinus angustifolia Vahl in Human Healthy Volunteers: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Rocío García-Villalba


    Full Text Available The bark, seeds, fruits and leaves of the genus Fraxinus (Oleaceae which contain a wide range of phytochemicals, mostly secoiridoid glucosides, have been widely used in folk medicine against a number of ailments, yet little is known about the metabolism and uptake of the major Fraxinus components. The aim of this work was to advance in the knowledge on the bioavailability of the secoiridoids present in a Fraxinus angustifolia Vahl seed/fruit extract using both targeted and untargeted metabolomic analyses. Plasma and urine samples from nine healthy volunteers were taken at specific time intervals following the intake of the extract and analyzed by UPLC-ESI-QTOF. Predicted metabolites such as tyrosol and ligstroside-aglycone glucuronides and sulfates were detected at low intensity. These compounds reached peak plasma levels 2 h after the intake and exhibited high variability among the participants. The ligstroside-aglycone conjugates may be considered as potential biomarkers of the Fraxinus secoiridoids intake. Using the untargeted approach we additionally detected phenolic conjugates identified as ferulic acid and caffeic acid sulfates, as well as hydroxybenzyl and hydroxyphenylacetaldehyde sulfate derivatives which support further metabolism of the secoiridoids by phase I and (or microbial enzymes. Overall, the results of this study suggest low uptake of intact secoiridoids from a Fraxinus angustifolia Vahl extract in healthy human volunteers and metabolic conversion by esterases, glycosidases, and phase II sulfo- and glucuronosyl transferases to form smaller conjugated derivatives.

  5. Shedding of ash deposits

    DEFF Research Database (Denmark)

    Zbogar, Ana; Frandsen, Flemming; Jensen, Peter Arendt;


    Ash deposits formed during fuel thermal conversion and located on furnace walls and on convective pass tubes, may seriously inhibit the transfer of heat to the working fluid and hence reduce the overall process efficiency. Combustion of biomass causes formation of large quantities of troublesome...... ash deposits which contain significant concentrations of alkali, and earth-alkali metals. The specific composition of biomass deposits give different characteristics as compared to coal ash deposits, i.e. different physical significance of the deposition mechanisms, lower melting temperatures, etc....... Low melting temperatures make straw ashes especially troublesome, since their stickiness is higher at lower temperatures, compared to coal ashes. Increased stickiness will eventually lead to a higher collection efficiency of incoming ash particles, meaning that the deposit may grow even faster...

  6. Influence of host age on critical fitness parameters of Spathius galinae (Hymenoptera: Braconidae), a new parasitoid of the emerald ash borer (Coleoptera: Buprestidae). (United States)

    Watt, Timothy J; Duan, Jian J


    Spathius galinae Belokobylskij and Strazenac (Hymenoptera: Braconidae) is a recently discovered gregarious idiobiont larval ectoparasitoid currently being evaluated for biological control against the invasive emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae) in the United States. To aid in the development of laboratory rearing protocols, we assessed the influence of various emerald ash borer stages on critical fitness parameters of S. galinae. We exposed gravid S. galinae females to emerald ash borer host larvae of various ages (3.5, 5, 7, and 10 wk post egg oviposition) that were reared naturally in tropical (evergreen) ash (Fraxinus uhdei (Wenzig) Lingelsh) logs, or to field-collected, late-stage emerald ash borers (nonfeeding J-shaped larvae termed "J-larvae," prepupae, and pupae) that were artificially inserted into green ash logs. When exposed to larvae in tropical ash logs, S. galinae attacked 5 and 7 wk hosts more frequently (68-76%) than 3.5 wk (23%) and 10 wk (12%) hosts. Subsample dissections of the these logs revealed that 3.5, 5, 7 and 10 wk host logs contained mostly second, third, fourth, and J-larvae, respectively, that had already bored into the sapwood for diapause. No J-larvae were attacked by S. galinae when naturally reared in tropical ash logs. When parasitized by S. galinae, 7 and 10 wk hosts produced the largest broods (approximately 6.7 offspring per parasitized host), and the progenies that emerged from these logs had larger anatomical measurements and more female-biased sex ratios. When exposed to emerald ash borer J-larvae, prepupae, or pupae artificially inserted into green ash logs, S. galinae attacked 53% ofJ-larvae, but did not attack any prepupae or pupae. We conclude that large (fourth instar) emerald ash borer larvae should be used to rear S. galinae.

  7. Trace elements in coal ash (United States)

    Deonarine, Amrika; Kolker, Allan; Doughten, Michael W.


    Coal ash is a residual waste product primarily produced by coal combustion for electric power generation. Coal ash includes fly ash, bottom ash, and flue-gas desulfurization products (at powerplants equipped with flue-gas desulfurization systems). Fly ash, the most common form of coal ash, is used in a range of products, especially construction materials. A new Environmental Protection Agency ruling upholds designation of coal ash as a non-hazardous waste under Subtitle D of the Resource Conservation and Recovery Act, allowing for the continued beneficial use of coal ash and also designating procedures and requirements for its storage.

  8. The variation of nutrient concentration in the rhizosphere of larch and ash in mixed and monoculture stands

    Institute of Scientific and Technical Information of China (English)


    Soil samples were taken from rhizosphere zone and off-rhizosphere zoneofash (Fraxinus mandshurica Rupr.) and larch (Larix olgensis Henry) in mixed a nd monoculture stands, and the nutrient concentration of N, P, and K was analyze d to study the effect of nutrients variation on yield improvement in the mixed stand. The result showed that: 1) The stand level total soil N concentration and available N in the mixed stand was similar to that in the monoculture stand of ash, but higher than that in monoculture stand of larch. The total N and availabl e N concentration in rhizosphere soil of ash in the mixed stand was similar to t hat in the monoculture stand of ash, but the available N concentration in rhizos phere of larch in mixed stand was much higher than in its monoculture. 2) The stand level total P, total K concentration in the mixed stand was similar to that in monoculture stands of both species, but available P and K was more concentrat ed in the mixed stand than in the monoculture stands of ash. The rhizosphere ava ilable P and K of ash in the mixed stand was 44.1% and 13.5% (for the 9-yr-old s tands) and 79.6% and 25.6% (for the 21-yr-old stands) higher than that in its monoculture. The improvement of soil P and K availability in the mixed stand is concluded.

  9. Identification of odor-processing genes in the emerald ash borer, Agrilus planipennis.

    Directory of Open Access Journals (Sweden)

    Praveen Mamidala

    Full Text Available BACKGROUND: Insects rely on olfaction to locate food, mates, and suitable oviposition sites for successful completion of their life cycle. Agrilus planipennis Fairmaire (emerald ash borer is a serious invasive insect pest that has killed tens of millions of North American ash (Fraxinus spp trees and threatens the very existence of the genus Fraxinus. Adult A. planipennis are attracted to host volatiles and conspecifics; however, to date no molecular knowledge exists on olfaction in A. planipennis. Hence, we undertook an antennae-specific transcriptomic study to identify the repertoire of odor processing genes involved in A. planipennis olfaction. METHODOLOGY AND PRINCIPAL FINDINGS: We acquired 139,085 Roche/454 GS FLX transcriptomic reads that were assembled into 30,615 high quality expressed sequence tags (ESTs, including 3,249 isotigs and 27,366 non-isotigs (contigs and singletons. Intriguingly, the majority of the A. planipennis antennal transcripts (59.72% did not show similarity with sequences deposited in the non-redundant database of GenBank, potentially representing novel genes. Functional annotation and KEGG analysis revealed pathways associated with signaling and detoxification. Several odor processing genes (9 odorant binding proteins, 2 odorant receptors, 1 sensory neuron membrane protein and 134 odorant/xenobiotic degradation enzymes, including cytochrome P450s, glutathione-S-transferases; esterases, etc. putatively involved in olfaction processes were identified. Quantitative PCR of candidate genes in male and female A. planipennis in different developmental stages revealed developmental- and sex-biased expression patterns. CONCLUSIONS AND SIGNIFICANCE: The antennal ESTs derived from A. planipennis constitute a rich molecular resource for the identification of genes potentially involved in the olfaction process of A. planipennis. These findings should help in understanding the processing of antennally-active compounds (e.g. 7-epi

  10. Molecular characterization of mariner-like elements in emerald ash borer, Agrilus planipennis (Coleoptera, Polyphaga). (United States)

    Rivera-Vega, L; Mittapalli, O


    Emerald ash borer (EAB, Agrilus planipennis), an exotic invasive pest, has killed millions of ash trees (Fraxinus spp.) in North America and continues to threaten the very survival of the entire Fraxinus genus. Despite its high-impact status, to date very little knowledge exists for this devastating insect pest at the molecular level. Mariner-like elements (MLEs) are transposable elements, which are ubiquitous in occurrence in insects and other invertebrates. Because of their low specificity and broad host range, they can be used for epitope-tagging, gene mapping, and in vitro mutagenesis. The majority of the known MLEs are inactive due to in-frame shifts and stop codons within the open reading frame (ORF). We report on the cloning and characterization of two MLEs in A. planipennis genome (Apmar1 and Apmar2). Southern analysis indicated a very high copy number for Apmar1 and a moderate copy number for Apmar2. Phylogenetic analysis revealed that both elements belong to the irritans subfamily. Based on the high copy number for Apmar1, the full-length sequence was obtained using degenerate primers designed to the inverted terminal repeat (ITR) sequences of irritans MLEs. The recovered nucleotide sequence for Apmar1 consisted of 1,292 bases with perfect ITRs, and an ORF of 1,050 bases encoding a putative transposase of 349 amino acids. The deduced amino acid sequence of Apmar1 contained the conserved regions of mariner transposases including WVPHEL and YSPDLAP, and the D,D(34)D motif. Both Apmar1 and Apmar2 could represent useful genetic tools and provide insights on EAB adaptation.

  11. Melting and Sintering of Ashes

    DEFF Research Database (Denmark)

    Hansen, Lone Aslaug


    obtained during coal/straw co-firing, substantive sintering strength was observed to build up in the ashes below the melting onset. The strength obtained was thus assumed to be due to viscous flow sintering, and the sintering onset was for the four ashes investigated simultaneous to a calculated ash......The thesis contains an experimental study of the fusion and sintering of ashes collected during straw and coal/straw co-firing.A laboratory technique for quantitative determination of ash fusion has been developed based on Simultaneous Thermal Analysis (STA). By means of this method the fraction...... of melt in the investigated ashes has been determined as a function of temperature. Ash fusion results have been correlated to the chemical and mineralogical composition of the ashes, to results from a standard ash fusion test and to results from sintering experiments. Furthermore, the ash fusion results...

  12. Ash cloud aviation advisories

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, T.J.; Ellis, J.S. [Lawrence Livermore National Lab., CA (United States); Schalk, W.W.; Nasstrom, J.S. [EG and G, Inc., Pleasanton, CA (United States)


    During the recent (12--22 June 1991) Mount Pinatubo volcano eruptions, the US Air Force Global Weather Central (AFGWC) requested assistance of the US Department of Energy`s Atmospheric Release Advisory Capability (ARAC) in creating volcanic ash cloud aviation advisories for the region of the Philippine Islands. Through application of its three-dimensional material transport and diffusion models using AFGWC meteorological analysis and forecast wind fields ARAC developed extensive analysis and 12-hourly forecast ash cloud position advisories extending to 48 hours for a period of five days. The advisories consisted of ``relative`` ash cloud concentrations in ten layers (surface-5,000 feet, 5,000--10,000 feet and every 10,000 feet to 90,000 feet). The ash was represented as a log-normal size distribution of 10--200 {mu}m diameter solid particles. Size-dependent ``ashfall`` was simulated over time as the eruption clouds dispersed. Except for an internal experimental attempt to model one of the Mount Redoubt, Alaska, eruptions (12/89), ARAC had no prior experience in modeling volcanic eruption ash hazards. For the cataclysmic eruption of 15--16 June, the complex three-dimensional atmospheric structure of the region produced dramatically divergent ash cloud patterns. The large eruptions (> 7--10 km) produced ash plume clouds with strong westward transport over the South China Sea, Southeast Asia, India and beyond. The low-level eruptions (< 7 km) and quasi-steady-state venting produced a plume which generally dispersed to the north and east throughout the support period. Modeling the sequence of eruptions presented a unique challenge. Although the initial approach proved viable, further refinement is necessary and possible. A distinct need exists to quantify eruptions consistently such that ``relative`` ash concentrations relate to specific aviation hazard categories.

  13. Role of emerald ash borer (Coleoptera: Buprestidae) larval vibrations in host-quality assessment by Tetrastichus planipennisi (Hymenoptera: Eulophidae). (United States)

    Ulyshen, Michael D; Mankin, Richard W; Chen, Yigen; Duan, Jian J; Poland, Therese M; Bauer, Leah S


    The biological control agent Tetrastichus planipennisi Yang (Hymenoptera: Eulophidae) is a gregarious larval endoparasitoid of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), an invasive cambium-feeding species responsible for recent, widespread mortality of ash (Fraxinus spp.) in North America. T. planipennisi is known to prefer late-instar emerald ash borer, but the cues used to assess host size by this species and most other parasitoids of concealed hosts remain unknown. We sought to test whether vibrations produced by feeding emerald ash borer vary with larval size and whether there are any correlations between these cues and T. planipennisi progeny number (i.e., brood size) and sex ratio. The amplitudes and rates of 3-30-ms vibrational impulses produced by emerald ash borer larvae of various sizes were measured in the laboratory before presenting the larvae to T. planipennisi. Impulse-rate did not vary with emerald ash borer size, but vibration amplitude was significantly higher for large larvae than for small larvae. T. planipennisi produced a significantly higher proportion of female offspring from large hosts than small hosts and was shown in previous work to produce more offspring overall from large hosts. There were no significant correlations, however, between the T. planipennisi progeny data and the emerald ash borer sound data. Because vibration amplitude varied significantly with host size, however, we are unable to entirely reject the hypothesis that T. planipennisi and possibly other parasitoids of concealed hosts use vibrational cues to assess host quality, particularly given the low explanatory potential of other external cues. Internal chemical cues also may be important.

  14. Measuring the impact of biotic factors on populations of immature emerald ash borers (Coleoptera: Buprestidae). (United States)

    Duan, Jian J; Ulyshen, Michael D; Bauer, Leah S; Gould, Juli; Van Driesche, Roy


    Cohorts of emerald ash borer larvae, Agrilus planipennis Fairmaire, were experimentally established in July of 2008 on healthy green ash (Fraxinus pennsylvanica) trees in two wooded plots at each of three sites near Lansing, MI, by caging gravid emerald ash borer females or placing laboratory-reared eggs on trunks (0.5-2 m above the ground) of selected trees. One plot at each site was randomly chosen for release of two introduced larval parasitoids, Tetrastichus planipennisi Yang (Hymenoptera: Eulophidae) and Spathius agrili Yang (Hymenoptera: Braconidae), whereas the other served as the control. Stage-specific mortality factors and rates were measured for all experimentally established cohorts and for associated wild (i.e., naturally occurring) emerald ash borer immature stages via destructive sampling of 2.5 m (above the ground) trunk sections of cohort-bearing trees in the spring and fall of 2009. Host tree defense was the most important mortality factor, causing 32.0 to 41.1% mortality in the experimental cohorts and 17.5 to 21.5% in wild emerald ash borer stages by spring 2009, and 16.1 to 29% for the remaining experimental cohorts, and 9.9 to 11.8% for wild immature emerald ash borer stages by fall 2009. Woodpecker predation was the second most important factor, inflicting no mortality in the experimental cohorts but causing 5.0 to 5.6% mortality to associated wild emerald ash borer stages by spring 2009 and 9.2 to 12.8% and 3.2 to 17.7%, respectively, for experimental cohorts and wild emerald ash borer stages by fall 2009. Mortality from disease in both the experimental and wild cohorts was low (emerald ash borer stages were parasitized by T. planipennisi. While there were no significant differences in mortality rates because of parasitism between parasitoid-release and control plots, T. planipennisi was detected in each of the three release sites by the end of the study but was not detected in the experimental cohorts or associated wild larvae in any of the

  15. Laboratory Evaluation of the Toxicity of Systemic Insecticides to Emerald Ash Borer Larvae. (United States)

    Poland, Therese M; Ciaramitaro, Tina M; McCullough, Deborah G


    Emerald ash borer (Agrilus planipennis Fairmaire) (Coleoptera: Buprestidae), an invasive phloem-feeding insect native to Asia, threatens at least 16 North American ash (Fraxinus) species and has killed hundreds of millions of ash trees in landscapes and forests. We conducted laboratory bioassays to assess the relative efficacy of systemic insecticides to control emerald ash borer larvae in winter 2009 and 2010. Second- and third-instar larvae were reared on artificial diet treated with varying doses of emamectin benzoate (TREE-äge, Arborjet, Inc., Woburn, MA), imidacloprid (Imicide, J. J Mauget Co., Arcadia, CA), dinotefuran (Safari, Valent Professional Products, Walnut Creek, CA), and azadirachtin (TreeAzin, BioForest Technologies, Inc., Sault Ste. Marie, Ontario, and Azasol, Arborjet, Inc., Woburn, MA). All of the insecticides were toxic to emerald ash borer larvae, but lethal concentrations needed to kill 50% of the larvae (LC50), standardized by larval weight, varied with insecticide and time. On the earliest date with a significant fit of the probit model, LC50 values were 0.024 ppm/g at day 29 for TREE-äge, 0.015 ppm/g at day 63 for Imicide, 0.030 ppm/g at day 46 for Safari, 0.025 ppm/g at day 24 for TreeAzin, and 0.027 ppm/g at day 27 for Azasol. The median lethal time to kill 50% (LT50) of the tested larvae also varied with insecticide product and dose, and was longer for Imicide and Safari than for TREE-äge or the azadirachtin products. Insecticide efficacy in the field will depend on adult and larval mortality as well as leaf and phloem insecticide residues.

  16. Regulation by uniconazole-P and gibberellins of morphological and anatomical responses of Fraxinus mandshurica seedlings to gravity. (United States)

    Jiang, S; Honma, T; Nakamura, T; Furukawa, I; Yamamoto, F


    The present study deals with roles of gibberellins (GAs) in gravitropic responses of woody stems of horizontally-positioned, 2-year-old seedling of Fraxinus mandshurica Rupr. var. japonica Maxim. The application of uniconazole-P, an inhibitor of GAs biosynthesis, to stem nodes at various concentrations significantly inhibited not only righting the stems but also wood formation. The application of GAs (GA3 and GA4) in combination with uniconazole-P negated the inhibitory effect of the treatment of uniconazole-P alone. The GAs alone did not affect wood formation, however, both GAs increased wood formation on both the upper and lower sides of horizontal stems with an increase in the concentration of combined uniconazole-P. In all of the seedlings, tension wood was formed on the upper side of stems. The application of uniconazole-P alone at various concentrations did not inhibit the formation of tension wood fibres.

  17. Studies on the Chemical Constituents of Fraxinus chinensis Roxb.%白蜡树的化学成分研究

    Institute of Scientific and Technical Information of China (English)

    张冬梅; 胡立宏; 叶文才; 赵守训


    目的:从白蜡树(Fraxinus chinensis Roxb. )树皮中提取分离抗癌活性成分.方法:运用各种层析手段和波谱方法分离并鉴定了5个木脂素化合物.结果:它们的结构分别鉴定为(+)-pinoresinol(I),(+)-acetoxypinoresinol(II),(+)-pinoresinol-β-D-glucopyranoside(II),(+)-syringaresinol-4,4′-O-bis-β-D-glucopyranoside(IV)和(+)-cycloolivil(V).结论:以上化合物均为从白蜡树中首次分得,其中化合物II具有VEGFR-1酪氨酸激酶抑制活性,提示该化合物可能有抗癌活性.

  18. Fusion characterization of biomass ash

    DEFF Research Database (Denmark)

    Ma, Teng; Fan, Chuigang; Hao, Lifang;


    The ash fusion characteristics are important parameters for thermochemical utilization of biomass. In this research, a method for measuring the fusion characteristics of biomass ash by Thermo-mechanical Analyzer, TMA, is described. The typical TMA shrinking ratio curve can be divided into two...... stages, which are closely related to ash melting behaviors. Several characteristics temperatures based on the TMA curves are used to assess the ash fusion characteristics. A new characteristics temperature, Tm, is proposed to represent the severe melting temperature of biomass ash. The fusion...... characteristics of six types of biomass ash have been measured by TMA. Compared with standard ash fusibility temperatures (AFT) test, TMA is more suitable for measuring the fusion characteristics of biomass ash. The glassy molten areas of the ash samples are sticky and mainly consist of K-Ca-silicates....

  19. Ash Properties of Alternative Biomass

    DEFF Research Database (Denmark)

    Capablo, Joaquin; Jensen, Peter Arendt; Pedersen, Kim Hougaard


    The ash behavior during suspension firing of 12 alternative solid biofuels, such as pectin waste, mash from a beer brewery, or waste from cigarette production have been studied and compared to wood and straw ash behavior. Laboratory suspension firing tests were performed on an entrained flow...... analysis into three main groups depending upon their ash content of silica, alkali metal, and calcium and magnesium. To further detail the biomass classification, the relative molar ratio of Cl, S, and P to alkali were included. The study has led to knowledge on biomass fuel ash composition influence...... on ash transformation, ash deposit flux, and deposit chlorine content when biomass fuels are applied for suspension combustion....

  20. MAT 126 ASH Course Tutorial / Tutorialoutlet




    For more course tutorials visit   MAT 126 Week 1 DQ 1 (Ash) MAT 126 Week 1 Quiz (Ash) MAT 126 Week 1 Written Assignment (Arithmetic and geometric sequence) (Ash) MAT 126 Week 2 DQ 1 (Ash) MAT 126 Week 2 DQ 2 (Ash) MAT 126 Week 2 Assignment Is It Fat Free (Ash) MAT 126 Week 2 Quiz (Ash) MAT 126 Week 3 DQ 1 (Ash) MAT 126 Week 3 DQ 2 (Ash) MAT 126 Week 3 Assignment Quadratic Equations (Ash) MAT 126 Week 3 Quiz (Ash) MAT 126...

  1. Tree Species Identity Shapes Earthworm Communities

    DEFF Research Database (Denmark)

    Schelfhout, Stephanie; Mertens, Jan; Verheyen, Kris


    Earthworms are key organisms in forest ecosystems because they incorporate organic material into the soil and affect the activity of other soil organisms. Here, we investigated how tree species affect earthworm communities via litter and soil characteristics. In a 36-year old common garden...... experiment, replicated six times over Denmark, six tree species were planted in blocks: sycamore maple (Acer pseudoplatanus), beech (Fagus sylvatica), ash (Fraxinus excelsior), Norway spruce (Picea abies), pedunculate oak (Quercus robur) and lime (Tilia cordata). We studied the chemical characteristics...... of soil and foliar litter, and determined the forest floor turnover rate and the density and biomass of the earthworm species occurring in the stands. Tree species significantly affected earthworm communities via leaf litter and/or soil characteristics. Anecic earthworms were abundant under Fraxinus, Acer...

  2. Quantifying the impact of woodpecker predation on population dynamics of the emerald ash borer (Agrilus planipennis.

    Directory of Open Access Journals (Sweden)

    David E Jennings

    Full Text Available The emerald ash borer (EAB, Agrilus planipennis, is an invasive beetle that has killed millions of ash trees (Fraxinus spp. since it was accidentally introduced to North America in the 1990s. Understanding how predators such as woodpeckers (Picidae affect the population dynamics of EAB should enable us to more effectively manage the spread of this beetle, and toward this end we combined two experimental approaches to elucidate the relative importance of woodpecker predation on EAB populations. First, we examined wild populations of EAB in ash trees in New York, with each tree having a section screened to exclude woodpeckers. Second, we established experimental cohorts of EAB in ash trees in Maryland, and the cohorts on half of these trees were caged to exclude woodpeckers. The following spring these trees were debarked and the fates of the EAB larvae were determined. We found that trees from which woodpeckers were excluded consistently had significantly lower levels of predation, and that woodpecker predation comprised a greater source of mortality at sites with a more established wild infestation of EAB. Additionally, there was a considerable difference between New York and Maryland in the effect that woodpecker predation had on EAB population growth, suggesting that predation alone may not be a substantial factor in controlling EAB. In our experimental cohorts we also observed that trees from which woodpeckers were excluded had a significantly higher level of parasitism. The lower level of parasitism on EAB larvae found when exposed to woodpeckers has implications for EAB biological control, suggesting that it might be prudent to exclude woodpeckers from trees when attempting to establish parasitoid populations. Future studies may include utilizing EAB larval cohorts with a range of densities to explore the functional response of woodpeckers.

  3. Quantifying the impact of woodpecker predation on population dynamics of the emerald ash borer (Agrilus planipennis). (United States)

    Jennings, David E; Gould, Juli R; Vandenberg, John D; Duan, Jian J; Shrewsbury, Paula M


    The emerald ash borer (EAB), Agrilus planipennis, is an invasive beetle that has killed millions of ash trees (Fraxinus spp.) since it was accidentally introduced to North America in the 1990s. Understanding how predators such as woodpeckers (Picidae) affect the population dynamics of EAB should enable us to more effectively manage the spread of this beetle, and toward this end we combined two experimental approaches to elucidate the relative importance of woodpecker predation on EAB populations. First, we examined wild populations of EAB in ash trees in New York, with each tree having a section screened to exclude woodpeckers. Second, we established experimental cohorts of EAB in ash trees in Maryland, and the cohorts on half of these trees were caged to exclude woodpeckers. The following spring these trees were debarked and the fates of the EAB larvae were determined. We found that trees from which woodpeckers were excluded consistently had significantly lower levels of predation, and that woodpecker predation comprised a greater source of mortality at sites with a more established wild infestation of EAB. Additionally, there was a considerable difference between New York and Maryland in the effect that woodpecker predation had on EAB population growth, suggesting that predation alone may not be a substantial factor in controlling EAB. In our experimental cohorts we also observed that trees from which woodpeckers were excluded had a significantly higher level of parasitism. The lower level of parasitism on EAB larvae found when exposed to woodpeckers has implications for EAB biological control, suggesting that it might be prudent to exclude woodpeckers from trees when attempting to establish parasitoid populations. Future studies may include utilizing EAB larval cohorts with a range of densities to explore the functional response of woodpeckers.

  4. MGT 330 ASH Course Tutorial / Tutorialoutlet




    For more course tutorials visit   MGT 330 Week 1 Individual Assignment Functions of Management Paper (Ash) MGT 330 Week 1 DQ 1 (Ash) MGT 330 Week 1 DQ 2 (Ash) MGT 330 Week 1 DQ 3 (Ash) MGT 330 Week 1 Summary (Ash) MGT 330 Week 2 Team Assignment External Internal Factors Paper (Ash) MGT 330 Week 2 Individual Assignment Delegation (Ash) MGT 330 Week 2 Summary (Ash) MGT 330 Week 2 DQ 1 (Ash) MGT 330 Week 2 DQ 2 (Ash) MGT 330 W...

  5. Core RNAi machinery and gene knockdown in the emerald ash borer (Agrilus planipennis). (United States)

    Zhao, Chaoyang; Alvarez Gonzales, Miguel A; Poland, Therese M; Mittapalli, Omprakash


    The RNA interference (RNAi) technology has been widely used in insect functional genomics research and provides an alternative approach for insect pest management. To understand whether the emerald ash borer (Agrilus planipennis), an invasive and destructive coleopteran insect pest of ash tree (Fraxinus spp.), possesses a strong RNAi machinery that is capable of degrading target mRNA as a response to exogenous double-stranded RNA (dsRNA) induction, we identified three RNAi pathway core component genes, Dicer-2, Argonaute-2 and R2D2, from the A. planipennis genome sequence. Characterization of these core components revealed that they contain conserved domains essential for the proteins to function in the RNAi pathway. Phylogenetic analyses showed that they are closely related to homologs derived from other coleopteran species. We also delivered the dsRNA fragment of AplaScrB-2, a β-fructofuranosidase-encoding gene horizontally acquired by A. planipennis as we reported previously, into A. planipennis adults through microinjection. Quantitative real-time PCR analysis on the dsRNA-treated beetles demonstrated a significantly decreased gene expression level of AplaScrB-2 appearing on day 2 and lasting until at least day 6. This study is the first record of RNAi applied in A. planipennis.

  6. Validation of reference genes for gene expression studies in the emerald ash borer (Agrilus planipennis)

    Institute of Scientific and Technical Information of China (English)

    Swapna Priya Rajarapu; Praveen Mamidala; Omprakash Mittapalli


    The Emerald ash borer (EAB,Agrilus planipennis Fairmaire) an exotic invasive insect pest has killed millions of ash trees (Fraxinus spp.) across North America and threatens billions more.We validated six A.planipennis reference genes (actin,ACT; beta tubulin,β- TUB; glyceraldehyde-3-phosphate dehydrogenase,GAPDH; ribosomal protein,RPL7; translation elongation factor 1α,TEF-1α; and ubiquitin,UBQ) using geNorm,Normfinder and BestKeeper for accurate determination of target messenger RNA levels in gene expression studies.The stability of the six reference genes was evaluated in different larval tissues,developmental stages and two treatments ofA.planipennis using quantitative real-time polymerase chain reaction.Although there was no consistent ranking observed among the reference genes across the samples,the overall analysis revealed TEF-1α as the most stable reference gene.GAPDH and ACT showed least stability for all the samples studied.We conclude that TEF-1α is the most appropriate reference gene for gene expression studies inA.planipennis.Results obtained can be applicable for transcript profiling in other invasive insect pests.Further,these validated reference genes could also serve as the basis for selection of candidate reference genes in any given insect system post-validation.

  7. Using Data From Seed-Dispersal Modelling to Manage Invasive Tree Species: The Example of Fraxinus pennsylvanica Marshall in Europe (United States)

    Schmiedel, Doreen; Huth, Franka; Wagner, Sven


    Management strategies to control invasive species need information about dispersal distances to predict establishment potential. Fraxinus pennsylvanica is a North American anemochorous tree species that is invasive in many Central European floodplain forests. To predict seed-dispersal potential, the stochastic model WaldStat was used, which enables different options for directionality (isotropic and anisotropic) to be simulated. In this article, we (1) show empirical results of fructification and seed dispersal for this tree species. The model predicts approximately 250,000 seeds for one F. pennsylvanica tree. These results were used to (2) calculate species-specific dispersal distances and effects of wind direction. To consider the influence of wind on dispersal potential of the tree species, long-distance dispersal (LDD [95th percentile dispersal distance]) was calculated. Mean dispersal distances varied between 47 and 66 m. LDD values modelled along the main wind direction ranged from 60 to 150 m. Seed production, dispersal distance, and direction data were (3) incorporated into theoretical management scenarios for forest ecosystems. Finally (4), we discuss management options and the practical relevance of model scenarios in relation to the accuracy of spatial dispersal predictions. Further analyses should be focused on possible, well-adapted management concepts at stand level that could restrict the potential spread of invasive species.

  8. Effect of elevated atmospheric CO2 concentration on growth and leaf litter decomposition of Quercus acutissima and Fraxinus rhynchophylla. (United States)

    Cha, Sangsub; Chae, Hee-Myung; Lee, Sang-Hoon; Shim, Jae-Kuk


    The atmospheric carbon dioxide (CO2) level is expected to increase substantially, which may change the global climate and carbon dynamics in ecosystems. We examined the effects of an elevated atmospheric CO2 level on the growth of Quercus acutissima and Fraxinus rhynchophylla seedlings. We investigated changes in the chemical composition of leaf litter, as well as litter decomposition. Q. acutissima and F. rhynchophylla did not show differences in dry weight between ambient CO2 and enriched CO2 treatments, but they exhibited different patterns of carbon allocation, namely, lower shoot/root ratio (S/R) and decreased specific leaf area (SLA) under CO2-enriched conditions. The elevated CO2 concentration significantly reduced the nitrogen concentration in leaf litter while increasing lignin concentrations and carbon/nitrogen (C/N) and lignin/N ratios. The microbial biomass associated with decomposing Q. acutissima leaf litter was suppressed in CO2 enrichment chambers, while that of F. rhynchophylla was not. The leaf litter of Q. acutissima from the CO2-enriched chambers, in contrast with F. rhynchophylla, contained much lower nutrient concentrations than that of the litter in the ambient air chambers. Consequently, poorer litter quality suppressed decomposition.

  9. Volcanic ash melting under conditions relevant to ash turbine interactions. (United States)

    Song, Wenjia; Lavallée, Yan; Hess, Kai-Uwe; Kueppers, Ulrich; Cimarelli, Corrado; Dingwell, Donald B


    The ingestion of volcanic ash by jet engines is widely recognized as a potentially fatal hazard for aircraft operation. The high temperatures (1,200-2,000 °C) typical of jet engines exacerbate the impact of ash by provoking its melting and sticking to turbine parts. Estimation of this potential hazard is complicated by the fact that chemical composition, which affects the temperature at which volcanic ash becomes liquid, can vary widely amongst volcanoes. Here, based on experiments, we parameterize ash behaviour and develop a model to predict melting and sticking conditions for its global compositional range. The results of our experiments confirm that the common use of sand or dust proxy is wholly inadequate for the prediction of the behaviour of volcanic ash, leading to overestimates of sticking temperature and thus severe underestimates of the thermal hazard. Our model can be used to assess the deposition probability of volcanic ash in jet engines.

  10. Ash Management Review—Applications of Biomass Bottom Ash

    Directory of Open Access Journals (Sweden)

    Harpuneet S. Ghuman


    Full Text Available In industrialized countries, it is expected that the future generation of bioenergy will be from the direct combustion of residues and wastes obtained from biomass. Bioenergy production using woody biomass is a fast developing application since this fuel source is considered to be carbon neutral. The harnessing of bioenergy from these sources produces residue in the form of ash. As the demand for bioenergy production increases, ash and residue volumes will increase. Major challenges will arise relating to the efficient management of these byproducts. The primary concerns for ash are its storage, disposal, use and the presence of unburned carbon. The continual increase in ash volume will result in decreased ash storage facilities (in cases of limited room for landfill expansion, as well as increased handling, transporting and spreading costs. The utilization of ash has been the focus of many studies, hence this review investigates the likely environmental and technological challenges that increased ash generation may cause. The presence of alkali metals, alkaline earth metals, chlorine, sulphur and silicon influences the reactivity and leaching to the inorganic phases which may have significant impacts on soils and the recycling of soil nutrient. Discussed are some of the existing technologies for the processing of ash. Unburned carbon present in ash allows for the exploration of using ash as a fuel. The paper proposes sieve fractionation as a suitable method for the separation of unburnt carbon present in bottom ash obtained from a fixed-bed combustion system, followed by the application of the gasification technology to particle sizes of energy importance. It is hoped that this process will significantly reduce the volume of ash disposed at landfills.

  11. MGT 401 ASH Course Tutorial / Tutorialoutlet




    For more course tutorials visit   MGT 401 Week 1 Individual Assignment Strategic Management Process Paper (Ash) MGT 401 Week 1 Class Activity Week 1 (Ash) MGT 401 Week 1 DQ 1 (Ash) MGT 401 Week 1 DQ 2 (Ash) MGT 401 Week 2 Learning Team Business Model Comparison Example (Ash) MGT 401 Week 2 DQ 1 (Ash) MGT 401 Week 2 DQ 2 (Ash) MGT 401 Week 2 Class Activity (Ash) MGT 401 Week 3 Individual Assignment Business Plan Evaluation (Ash) ...

  12. Melting Behavior of Volcanic Ash relevant to Aviation Ash Hazard (United States)

    Song, W.; Hess, K.; Lavallee, Y.; Cimarelli, C.; Dingwell, D. B.


    Volcanic ash is one of the major hazards caused by volcanic eruptions. In particular, the threat to aviation from airborne volcanic ash has been widely recognized and documented. In the past 12 years, more than 60 modern jet airplanes, mostly jumbo jets, have been damaged by drifting clouds of volcanic ash that have contaminated air routes and airport facilities. Seven of these encounters are known to have caused in-flight loss of engine power to jumbo jets carrying a total of more than 2000 passengers. The primary cause of engine thrust loss is that the glass in volcanic ash particles is generated at temperatures far lower than the temperatures in the combustion chamber of a jet engine ( i.e. > 1600 oC) and when the molten volcanic ash particles leave this hottest section of the engine, the resolidified molten volcanic ash particles will be accumulated on the turbine nozzle guide vanes, which reduced the effective flow of air through the engine ultimately causing failure. Thus, it is essential to investigate the melting process and subsequent deposition behavior of volcanic ash under gas turbine conditions. Although few research studies that investigated the deposition behavior of volcanic ash at the high temperature are to be found in public domain, to the best our knowledge, no work addresses the formation of molten volcanic ash. In this work, volcanic ash produced by Santiaguito volcano in Guatemala in November 8, 2012 was selected for study because of their recent activity and potential hazard to aircraft safety. We used the method of accessing the behavior of deposit-forming impurities in high temperature boiler plants on the basis of observations of the change in shape and size of a cylindrical coal ash to study the sintering and fusion phenomena as well as determine the volcanic ash melting behavior by using characteristic temperatures by means of hot stage microscope (HSM), different thermal analysis (DTA) and Thermal Gravimetric Analysis (TGA) to

  13. Ash in the Soil System (United States)

    Pereira, P.


    Ash is the organic and inorganic residue produced by combustion, under laboratory and field conditions. This definition is far away to be accepted. Some researchers consider ash only as the inorganic part, others include also the material not completely combusted as charcoal or biochar. There is a need to have a convergence about this question and define clear "what means ash". After the fire and after spread ash onto soil surface, soil properties can be substantially changed depending on ash properties, that can be different according to the burned residue (e.g wood, coal, solid waste, peppermill, animal residues), material treatment before burning, time of exposition and storage conditions. Ash produced in boilers is different from the produced in fires because of the material diferent propertie and burning conditions. In addition, the ash produced in boilers is frequently treated (e.g pelletization, granulation, self curing) previously to application, to reduce the negative effects on soil (e.g rapid increase of pH, mycorrhiza, fine roots of trees and microfauna). These treatments normally reduce the rate of nutrients dissolution. In fires this does not happen. Thus the implications on soil properties are logically different. Depending on the combustion temperature and/or severity, ash could have different physical (e.g texture, wettability) and chemical properties (e.g amount and type of total and leached nutrients) and this will have implications on soil. Ash can increase and decrease soil aggregation, wettablity and water retention, bulk density, runoff and water infiltration. Normally, ash increases soil pH, Electrical Conductivity, and the amount of some basic nutrients as calcium, magnesium, sodium and potassium. However it is also a potential source of heavy metals, especially if ash pH is low. However the effect of ash on soil in space and time depends especially of the ash amount and characteristics, fire temperature, severity, topography, aspect

  14. Variation in root wood anatomy

    NARCIS (Netherlands)

    Cutler, D.F.


    Variability in the anatomy of root wood of selected specimens particularly Fraxinus excelsior L. and Acer pseudoplatanus L. in the Kew reference microscope slide collection is discussed in relation to generalised statements in the literature on root wood anatomy.

  15. Electrodialytic treatment of fly ash

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Pedersen, Anne Juul; Kirkelund, Gunvor Marie;

    Heavy metals are removed from the fly ashes by an electrodialytic treatment with the aim of up-grading the ashes for reuse in stead of disposal in landfill.A great potential for upgrading of bio- and waste incineration ashes by electrodialytic treatment exists. In the future, the applicability...... of the treated products for reuse in construction or farming sectors should be explored further, as should the possibility of recycling of valuable, extracted elements in the metallurgical industry....

  16. Dielectric properties of fly ash

    Indian Academy of Sciences (India)

    S C Raghavendra; R L Raibagkar; A B Kulkarni


    This paper reports the dielectric properties of fly ash. The dielectric measurements were performed as a function of frequency and temperature. The sample of fly ash shows almost similar behaviour in the frequency and temperature range studied. The large value of dielectric constant in the typical frequency range is because of orientation polarization and tight binding force between the ions or atoms in the fly ash. The sample of fly ash is of great scientific and technological interest because of its high value of dielectric constant (104).

  17. Ash Aggregates in Proximal Settings (United States)

    Porritt, L. A.; Russell, K.


    Ash aggregates are thought to have formed within and been deposited by the eruption column and plume and dilute density currents and their associated ash clouds. Moist, turbulent ash clouds are considered critical to ash aggregate formation by facilitating both collision and adhesion of particles. Consequently, they are most commonly found in distal deposits. Proximal deposits containing ash aggregates are less commonly observed but do occur. Here we describe two occurrences of vent proximal ash aggregate-rich deposits; the first within a kimberlite pipe where coated ash pellets and accretionary lapilli are found within the intra-vent sequence; and the second in a glaciovolcanic setting where cored pellets (armoured lapilli) occur within Diamond Mine, Canada, are the residual deposits within the conduit and vent of the volcano and are characterised by an abundance of ash aggregates. Coated ash pellets are dominant but are followed in abundance by ash pellets, accretionary lapilli and rare cored pellets. The coated ash pellets typically range from 1 - 5 mm in diameter and have core to rim ratios of approximately 10:1. The formation and preservation of these aggregates elucidates the style and nature of the explosive phase of kimberlite eruption at A418 (and other pipes?). First, these pyroclasts dictate the intensity of the kimberlite eruption; it must be energetic enough to cause intense fragmentation of the kimberlite to produce a substantial volume of very fine ash (sustained plume attended by concomitant production of pyroclastic density currents. The size and internal structure of the armoured lapilli provide constraints on the nature of the initial explosive phase of eruption at Kima'Kho. Their proximity to the vent also indicates rapid aggregation within the eruption plume. Within both sequences rapid aggregation of ash particles occurred in proximity to the vent. However, the conditions were substantially different leading to the production of armoured

  18. Volcanic ash infrared signature: realistic ash particle shapes compared to spherical ash particles

    Directory of Open Access Journals (Sweden)

    A. Kylling


    Full Text Available The reverse absorption technique is often used to detect volcanic clouds from thermal infrared satellite measurements. From these measurements particle size and mass loading may also be estimated using radiative transfer modelling. The radiative transfer modelling usually assumes that the ash particles are spherical. We calculate thermal infrared optical properties of highly irregular and porous ash particles and compare these with mass- and volume-equivalent spherical models. Furthermore, brightness temperatures pertinent to satellite observing geometry are calculated for the different ash particle shapes. Non-spherical shapes and volume-equivalent spheres are found to produce a detectable ash signal for larger particle sizes than mass-equivalent spheres. The assumption of mass-equivalent spheres for ash mass loading estimates will underestimate the mass loading by several tens of percent compared to morphologically complex inhomogeneous ash particles.

  19. Volcanic ash infrared signature: realistic ash particle shapes compared to spherical ash particles (United States)

    Kylling, A.; Kahnert, M.; Lindqvist, H.; Nousiainen, T.


    The reverse absorption technique is often used to detect volcanic clouds from thermal infrared satellite measurements. From these measurements particle size and mass loading may also be estimated using radiative transfer modelling. The radiative transfer modelling usually assumes that the ash particles are spherical. We calculate thermal infrared optical properties of highly irregular and porous ash particles and compare these with mass- and volume-equivalent spherical models. Furthermore, brightness temperatures pertinent to satellite observing geometry are calculated for the different ash particle shapes. Non-spherical shapes and volume-equivalent spheres are found to produce a detectable ash signal for larger particle sizes than mass-equivalent spheres. The assumption of mass-equivalent spheres for ash mass loading estimates will underestimate the mass loading by several tens of percent compared to morphologically complex inhomogeneous ash particles.

  20. Evaluation of double-decker traps for emerald ash borer (Coleoptera: Buprestidae). (United States)

    Poland, Therese M; McCullough, Deborah G; Anulewicz, Andrea C


    Improved detection tools are needed for the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), an invasive forest insect from Asia that has killed millions of ash (Fraxinus spp.) trees in North America since its discovery in Michigan in 2002. We evaluated attraction of adult A. planipennis to artificial traps incorporating visual (e.g., height, color, silhouette) and olfactory cues (e.g., host volatiles) at field sites in Michigan. We developed a double-decker trap consisting of a 3-m-tall polyvinyl pipe with two purple prisms attached near the top. In 2006, we compared A. planipennis attraction to double-decker traps baited with various combinations of manuka oil (containing sesquiterpenes present in ash bark), a blend of four ash leaf volatiles (leaf blend), and a rough texture to simulate bark. Significantly more A. planipennis were captured per trap when traps without the rough texture were baited with the leaf blend and manuka oil lures than on traps with texture and manuka oil but no leaf blend. In 2007, we also tested single prism traps set 1.5 m above ground and tower traps, similar to double-decker traps but 6 m tall. Double-decker traps baited with the leaf blend and manuka oil, with or without the addition of ash leaf and bark extracts, captured significantly more A. planipennis than similarly baited single prism traps, tower traps, or unbaited double-decker traps. A baited double-decker trap captured A. planipennis at a field site that was not previously known to be infested, representing the first detection event using artificial traps and lures. In 2008, we compared purple or green double-decker traps, single prisms suspended 3-5 m above ground in the ash canopy (canopy traps), and large flat purple traps (billboard traps). Significantly more A. planipennis were captured in purple versus green traps, baited traps versus unbaited traps, and double-decker versus canopy traps, whereas billboard traps were intermediate. At sites

  1. Influence of Bed Ash and Fly Ash Replacement in Mortars

    Directory of Open Access Journals (Sweden)

    S. L. Summoogum-Utchanah


    Full Text Available The study evaluates the influence of fly ash and bottom ash as partial cement substitutes in mortars by studying the particle size distribution, consistency, flow, fresh density, air content, compressive strength and flexural strength characteristics. The results revealed that fly ash and cement had relatively the same particle size distribution unlike bottom ash. In the fresh state, as the amount of pozzolans increased in the mixtures, the mortars showed an enhancement in workability, were susceptible to water loss by bleeding, and exhibited a decline in fresh density. The early strength gains of the fly ash samples were low but reached higher than the control after 28 days of curing. The flexural strength increased as the fly ash content rose to reach a maximum at 20 % replacement. However, the 2-day compressive strength of bottom ash samples was higher than the control but decreased after 28 days of curing while the flexural strength declined with addition of bottom ash except at 5 % substitution.

  2. Comparing carbon isotope composition of bulk wood and holocellulose from Quercus cerris, Fraxinus ornus and Pinus radiata tree rings

    Directory of Open Access Journals (Sweden)

    D’Alessandro CM


    Full Text Available Tree-ring δ13C is widely employed in ecophysiological studies, because it represents an integrated proxy of the ratio between photosynthesis (A and stomatal conductance (g, which expresses the intrinsic water use efficiency (iWUE, strongly affected by the environmental conditions experienced by the plant during its life span. Tree-ring δ13C also reflects long term variations of atmospheric CO2 concentration and of its carbon isotope composition, partly due to increasing anthropogenic emissions. Carbon isotope abundances in tree rings can be assessed on bulk wood as well as on wood? biochemical components, wich show different δ13C values because of secondary discrimination during biosynthesis.We present the results of a comparison between δ13C values of bulk wood and holocellulose samples obtained from the last three (1999, 2000 and 2001 annual growth rings of two hardwood (Quercus cerris L. and Fraxinus ornus L. and one conifer (Pinus radiata D. Don, species. We found that δ13C values differed significantly among tree species, both in the case of holocellulose and bulk wood, but only in the case of P. radiata bulk wood samples tend to provide more negative δ13C values than holocellulose, as reported in the literature. We suggest that, at least for the two hardwood species studied, bulk wood is a suitable material to work with for δ13C assessment, whilst in P. radiata holocellulose could provide a more stable and reliable index, when studying plant ecophysiological responses to changing environmental conditions.

  3. Fat-tailed gene flow in the dioecious canopy tree species Fraxinus mandshurica var. japonica revealed by microsatellites. (United States)

    Goto, S; Shimatani, K; Yoshimaru, H; Takahashi, Y


    Pollen flow, seed dispersal and individual reproductive success can be simultaneously estimated from the genotypes of adults and offspring using stochastic models. Using four polymorphic microsatellite loci, gene flow of the wind-pollinated and wind-seed-dispersed dioecious tree species, Fraxinus mandshurica var. japonica, was quantified in a riparian forest, in northern Japan. In a 10.5-ha plot, 74 female adults, 76 male adults and 292 current-year seedlings were mapped and genotyped, together with 200 seeds. To estimate dispersal kernels of pollen and seeds, we applied normal, exponential power, Weibull, bivariate t-distribution kernels, and two-component models consisting of two normal distribution functions, one with a small and one with a large variance. A two-component pollen flow model with a small contribution (26.1%) from short-distance dispersal (sigma = 7.2 m), and the rest from long-distance flow (sigma = 209.9 m), was chosen for the best-fitting model. The average distance that integrated pollen flows inside and outside the study plot was estimated to be 196.8 m. Tree size and flowering intensity affected reproduction, and there appeared to be critical values that distinguished reproductively successful and unsuccessful adults. In contrast, the gene flow model that estimated both pollen and seed dispersal from established seedlings resulted in extensive seed dispersal, and the expected spatial genetic structures did not satisfactorily fit with the observations, even for the selected model. Our results advanced small-scale individual-based parentage analysis for quantifying fat-tailed gene flow in wind-mediated species, but also clarified its limitations and suggested future possibilities for gene flow studies.

  4. Ethylene Evolution Changes in Tilted Fraxinus mandshurica Rupr. var. japonica Maxim. Seedlings in Relation to Tension Wood Formation

    Institute of Scientific and Technical Information of China (English)

    Sha Jiang; Ke Xu; Na Zhao; Shu-Xin Zheng; Yan-Ping Ren; Yu-Bao Gao; Song Gu


    The effects of ethylene on tension wood formation were studied in 3-year-old Fraxinus mandshurica Rupr. var. japonica Maxim, seedlings in two separate experiments. In experiment 1, ethylene evolution of buds and stems was measured using gas chromatography after 0, 2,4, 7,14, and 21 d of treatment; in experiment 2, both aminoethoxyvinylglycine (AVG) and AgNO3 were applied to the horizontally-placed stems, and the cell numbers on sites of applications were measured after 40 d. Ethylene evolution from buds was found to be much greater in tilted seedlings than in upright ones. The cell numbers of wood fibers in shoots and 1-year-old stems were reduced in treatments with 12.5 x 10-7 μmol/L AVG, 12.5 x 10-8 μmol/L AVG, and 11.8 x 10-8 μmol/L AgNO3; whereas the horizontal and vertical diameters were reduced by treatment of 12.5 x 10-7 μnol/L AVG. Ethylene evolutions of shoots and 1-year-old stems were inhibited greatly in comparison with the control by applying 12.5 x 10-7 μmol/L AVG. The formation of a gelatinous layer of wood fibers was affected by neither AVG nor AgNO3 application. These results suggest that ethylene regulates the quantity of wood production, but does not affect G-layer formation in F. mandshurica Rupr. var. japonica Maxim, seedlings.

  5. Responses of hydraulics at the whole-plant level to simulated nitrogen deposition of different levels in Fraxinus mandshurica. (United States)

    Wang, Ai-Ying; Wang, Miao; Yang, Da; Song, Jia; Zhang, Wei-Wei; Han, Shi-Jie; Hao, Guang-You


    Nitrogen (N) deposition is expected to have great impact on forest ecosystems by affecting many aspects of plant-environmental interactions, one of which involves its influences on plant water relations through modifications of plant hydraulic architecture. However, there is a surprising lack of integrative study on tree hydraulic architecture responses to N deposition, especially at the whole-plant level. In the present study, we used a 5-year N addition experiment to simulate the effects of six different levels of N deposition (20-120 kg ha(-1) year(-1)) on growth and whole-plant hydraulic conductance of a dominant tree species (Fraxinus mandshurica Rupr.) from the typical temperate forest of NE China. The results showed that alleviation of N limitation by moderate concentrations of fertilization (20-80 kg ha(-1) year(-1)) promoted plant growth, but further N additions on top of the threshold level showed negative effects on plant growth. Growth responses of F. mandshurica seedlings to N addition of different concentrations were accompanied by corresponding changes in whole-plant hydraulic conductance; higher growth rate was accompanied by reduced whole-plant hydraulic conductance (Kplant) and higher leaf water-use efficiency. A detailed analysis on hydraulic conductance of different components of the whole-plant water transport pathway revealed that changes in root and leaf hydraulic conductance, rather than that of the stem, were responsible for Kplant responses to N fertilization. Both plant growth and hydraulic architecture responses to increasing levels of N addition were not linear, i.e., the correlation between measured parameters and N availability exhibited bell-shaped curves with peak values observed at medium levels of N fertilization. Changes in hydraulic architecture in response to fertilization found in the present study may represent an important underlying mechanism for the commonly observed changes in water-related tree performances

  6. Identification and nanoentrapment of polyphenolic phytocomplex from Fraxinus angustifolia: in vitro and in vivo wound healing potential. (United States)

    Moulaoui, Kenza; Caddeo, Carla; Manca, Maria Letizia; Castangia, Ines; Valenti, Donatella; Escribano, Elvira; Atmani, Djebbar; Fadda, Anna Maria; Manconi, Maria


    The aim of the present study was to elucidate the polyphenolic composition of Fraxinus angustifolia leaf and bark extracts, and to evaluate their efficacy in wound healing. Quercetin, catechin, rutin and tannic acid were identified as the main components of the extracts. In order to improve their skin bioavailability, the polyphenolic phytocomplexes were incorporated in different nanovesicles, namely ethosomes and phospholipid vesicles containing Transcutol(®) P (Trc) or ethylene glycol (EG). The latter had never been used before as a component of phospholipid vesicles, and it was found to play a key role in improving extract efficacy in wound healing. Results of cryogenic transmission electron microscopy (cryo-TEM), Photon Correlation Spectroscopy (PCS) and Small-Angle X-ray Scattering (SAXS) showed that ethosomes and EG-PEVs were small, monodispersed, unilamellar vesicles, while Trc-PEVs were larger, less homogeneously dispersed and multilamellar, with a large bilayer thickness. Free extracts did not show relevant ability to protect in vitro human keratinocytes from H2O2 damages, while when entrapped in nanovesicles, they significantly inhibited H2O2 stress damages, probably related to a higher level of cell uptake. On the other hand, in vivo results showed that the highest antioxidant and anti-inflammatory effects were provided by the phytocomplexes in EG-PEVs, which favoured wound healing. Moreover, non-entrapped F. angustifolia extracts showed a marginal effect, comparable to that of free quercetin dispersion (control). In conclusion, our results depict that these extracts may find potential applications in biomedicine.

  7. Fly ash quality and utilization

    Energy Technology Data Exchange (ETDEWEB)

    Barta, L.E.; Lachner, L.; Wenzel, G.B. [Inst. for Energy, Budapest (Hungary); Beer, M.J. [Massachusetts Inst. of Technology, Cambridge, MA (United States)


    The quality of fly ash is of considerable importance to fly ash utilizers. The fly ash puzzolanic activity is one of the most important properties that determines the role of fly ash as a binding agent in the cementing process. The puzzolanic activity, however is a function of fly ash particle size and chemical composition. These parameters are closely related to the process of fly ash formation in pulverized coal fired furnaces. In turn, it is essential to understand the transformation of mineral matter during coal combustion. Due to the particle-to-particle variation of coal properties and the random coalescence of mineral particles, the properties of fly ash particles e.g. size, SiO{sub 2} content, viscosity can change considerably from particle to particle. These variations can be described by the use of the probability theory. Since the mean values of these randomly changing parameters are not sufficient to describe the behavior of individual fly ash particles during the formation of concrete, therefore it is necessary to investigate the distribution of these variables. Examples of these variations were examined by the Computer Controlled Scanning Electron Microscopy (CCSEM) for particle size and chemical composition for Texas lignite and Eagel Butte mineral matter and fly ash. The effect of combustion on the variations of these properties for both the fly ash and mineral matter were studied by using a laminar flow reactor. It is shown in our paper, that there are significant variations (about 40-50% around the mean values) of the above-listed properties for both coal samples. By comparing the particle size and chemical composition distributions of the mineral matter and fly ash, it was possible to conclude that for the Texas lignite mineral matter, the combustion did not effect significantly the distribution of these properties, however, for the Eagel Butte coal the combustion had a major impact on these mineral matter parameters.

  8. Evidence of cross-reactivity between olive, ash, privet, and Russian olive tree pollen allergens. (United States)

    Kernerman, S M; McCullough, J; Green, J; Ownby, D R


    In a clinical investigation, 103 Michigan residents with symptoms suggestive of allergic rhinitis or asthma were skin tested with olive (Olea europaea) pollen extract. Nineteen had positive reactions. Since the olive tree is not native to nor grown in Michigan, this study was undertaken to determine whether the skin test reactivity was the result of cross-reactivity among tree pollen allergens. ELISAs were developed to measure olive, ash (Fraxinus americana), privet (Ligustrum vulgare), and Russian olive (Elaeagnus angustifolia) specific IgE antibodies. Inhibition studies were performed to determine whether pollen extracts from each of these tree species could inhibit IgE antibody binding to olive extracts. Eleven of the 19 skin test-positive patients were olive-ELISA positive, eight either were ELISA-positive to ash, seven to privet and ten to Russian olive. There were significant correlations between the ELISA results to olive and each of the other three pollens. The inhibition studies demonstrated that all three of the tree pollens were capable of inhibiting the binding of IgE to olive extract in a dose-response fashion. IgE-immunoblot studies demonstrated several proteins common to olive, ash, and privet. Twelve of the olive skin test-positive patients were contacted and 75% were exposed to one or more of the studied trees in their yards. Five patients had traveled to areas where olive trees are grown. We conclude that there is a high degree of cross-reactivity among allergens from native Michigan trees and from olive trees. This cross-reactivity is the most likely reason for skin test reactivity to olive pollen extract in Michigan.

  9. Detectability of the emerald ash borer (Coleoptera: Buprestidae) in asymptomatic urban trees by using branch samples. (United States)

    Ryall, Krista L; Fidgen, Jeffrey G; Turgeon, Jean J


    The emerald ash borer, Agrilus planipennis Fairmaire, is an exotic invasive insect causing extensive mortality to ash trees, Fraxinus spp., in Canada and the United States. Detection of incipient populations of this pest is difficult because of its cryptic life stages and a multiyear time lag between initial attack and the appearance of signs or symptoms of infestation. We sampled branches from open-grown urban ash trees to develop a sample unit suitable for detecting low density A. planipennis infestation before any signs or symptoms are evident. The sample unit that maximized detection rates consisted of one 50-cm-long piece from the base of a branch ≥6 cm diameter in the midcrown. The optimal sample size was two such branches per tree. This sampling method detected ≈75% of asymptomatic trees known to be infested by using more intensive sampling and ≈3 times more trees than sampling one-fourth of the circumference of the trunk at breast height. The method is less conspicuous and esthetically damaging to a tree than the removal of bark from the main stem or the use of trap trees, and could be incorporated into routine sanitation or maintenance of city-owned trees to identify and delineate infested areas. This research indicates that branch sampling greatly reduces false negatives associated with visual surveys and window sampling at breast height. Detection of A. planipennis-infested asymptomatic trees through branch sampling in urban centers would provide landowners and urban foresters with more time to develop and implement management tactics.

  10. Characterization and virulence of Beauveria spp. recovered from emerald ash borer in southwestern Ontario, Canada. (United States)

    Johny, Shajahan; Kyei-Poku, George; Gauthier, Debbie; Frankenhuyzen, Kees van; Krell, Peter J


    The emerald ash borer (EAB), Agrilus planipennis (Coleoptera: Buprestidae), is an invasive wood boring beetle that is decimating North America's ash trees (Fraxinus spp.). To find effective and safe indigenous biocontrol agents to manage EAB, we conducted a survey in 2008-2009 of entomopathogenic fungi (EPF) infecting EAB in five outbreak sites in southwestern Ontario, Canada. A total of 78 Beauveria spp. isolates were retrieved from dead and mycosed EAB cadavers residing in the phloem tissues of dead ash barks, larval frass extracted from feeding galleries under the bark of dead trees. Molecular characterization using sequences of the ITS, 5' end of EF1-α and intergenic Bloc region fragments revealed that Beauveria bassiana and Beauveria pseudobassiana were commonly associated with EAB in the sampled sites. Based on phylogenetic analysis inferred from ITS sequences, 17 of these isolates clustered with B. bassiana, which further grouped into three different sub-clades. However, the combined EF1-α and Bloc sequences detected five genotypes among the three sub-clades. The remaining 61 isolates clustered with B. pseudobassiana, which had identical ITS sequences but were further subdivided into two genotypes by variation in the EF1-α and Bloc regions. Initial virulence screening against EAB adults of 23 isolates representing the different clades yielded 8 that produced more than 90% mortality in a single concentration assay. These isolates differed in virulence based on LC(50) values estimated from multiple concentration bioassay and based on mean survival times at a conidia concentration of 2×10(6) conidia/ml. B. bassiana isolate L49-1AA was significantly more virulent and produced more conidia on EAB cadavers compared to the other indigenous isolates and the commercial strain B. bassiana GHA suggesting that L49-1AA may have potential as a microbiological control agent against EAB.

  11. Glutathione-S-transferase profiles in the emerald ash borer, Agrilus planipennis. (United States)

    Rajarapu, Swapna Priya; Mittapalli, Omprakash


    The emerald ash borer, Agrilus planipennis Fairmaire is a recently discovered invasive insect pest of ash, Fraxinus spp. in North America. Glutathione-S-transferases (GST) are a multifunctional superfamily of enzymes which function in conjugating toxic compounds to less toxic and excretable forms. In this study, we report the molecular characterization and expression patterns of different classes of GST genes in different tissues and developmental stages plus their specific activity. Multiple sequence alignment of all six A. planipennis GSTs (ApGST-E1, ApGST-E2, ApGST-E3, ApGST-O1, ApGST-S1 and ApGST-μ1) revealed conserved features of insect GSTs and a phylogenetic analysis grouped the GSTs within the epsilon, sigma, omega and microsomal classes of GSTs. Real time quantitative PCR was used to study field collected samples. In larval tissues high mRNA levels for ApGST-E1, ApGST-E3 and ApGST-O1 were obtained in the midgut and Malpighian tubules. On the other hand, ApGST-E2 and ApGST-S1 showed high mRNA levels in fat body and ApGST-μ1 showed constitutive levels in all the tissues assayed. During development, mRNA levels for ApGST-E2 were observed to be the highest in feeding instars, ApGST-S1 in prepupal instars; while the others showed constitutive patterns in all the developmental stages examined. At the enzyme level, total GST activity was similar in all the tissues and developmental stages assayed. Results obtained suggest that A. planipennis is potentially primed with GST-driven detoxification to metabolize ash allelochemicals. To our knowledge this study represents the first report of GSTs in A. planipennis and also in the family of wood boring beetles.

  12. HIS 103 ASH course tutorial/tutorialoutlet


    NARESH 1


    For more course tutorials visit   HIS 103 Week 1 DQ 1 (Transition to Agriculture) (Ash) HIS 103 Week 1 DQ 2 (Early Complex Societies) (Ash) HIS 103 Week 1 Quiz (Ash) HIS 103 Week 1 Assignment (Ash) HIS 103 Week 2 Assignment Greco Roman Influence Paper (Ash) HIS 103 Week 2 DQ 1 Chinese Social and Political Order Systems (Ash) HIS 103 Week 2 DQ 2 Caste System (Ash) HIS 103 Week 2 Quiz (Ash) HIS 103 Week 3 Assignment Black Death Dra...

  13. Leaching from biomass combustion ash

    DEFF Research Database (Denmark)

    Maresca, Alberto; Astrup, Thomas Fruergaard


    The use of biomass combustion ashes for fertilizing and liming purposes has been widely addressed in scientific literature. Nevertheless, the content of potentially toxic compounds raises concerns for a possible contamination of the soil. During this study five ash samples generated at four...

  14. 经夏越冬播种水曲柳种子的萌发效应%Germination Responses of Fraxinus mandshurica Rupr. Seeds Sowed Last Summer

    Institute of Scientific and Technical Information of China (English)

    张鹏; 沈海龙


    The stored mature seeds of Fraxinus mandshurica were sowed last summer as materials in the research on germination responses of overwintering pregermination on field. The results showed that the stored mature seeds sowed last summer could germinate with the overwintering treatment. In northeast China, the appropriate sowing time was before September. The germination percentage increased with different treatments of plant growth substances, and the treatment of 100 mg·L~(-1) kinetin for 1 day had better effects on the germination of Fraxinus mandshurica seeds.%贮藏的成熟水曲柳种子经夏越冬播种的结果表明,贮藏的成熟种子经夏越冬播种可以萌发,东北地区的播种时间宜在9月之前.用适宜的植物生长调节物质处理可以获得较好的发芽效果,其中以100 mg·L~(-1)激动素浸种1 d的效果较好.

  15. Variations of root hydraulic conductance of Fraxinus mandshurica seedlings in different concentrations of NH4N03 solution

    Institute of Scientific and Technical Information of China (English)

    SUN Hailong; WU Chu; XU Wenjing; WANG Zhengquan


    Absorbing water from soil by roots in vascular plants is an important physiological function and plays an essential role on their water balance.The root hydraulic conductance (Lp) determined by radical water transport inside the root is a major influence on the shoot water status,plant growth,and development.However,a few studies have focused on the effect of different substances on Lp of roots,and the role of radical water transport was poorly understood.Based on the pressure-flux approach,this study used the roots of Fraxinus mandshurica seedlings with different treatments,i.e.,distilled water,NH4NO3 solution,and HgC12 to determine the effect of various substances on Lp of roots.The objectives are:1) to evaluate the difference in Lp occurred between distilled water and NH4NO3 solution with various concentrations;and 2) to examine the changes of Lp under distilled water and NH4NO3 solution with various concentrations after HgC12 treatment.The results showed that Lp of roots were 18.85×10-8 m/(s·MPa) in distilled water,31.25-34.15× 10-8 m/(s·MPa) in four NHnNO3 solutions (2,4,8 and 16 mmol/L),14.69×10-8 m/(s.MPa) in distilled water after HgC12-treated,and 9.63-13.57×10-8 m/(s·MPa)in four NH4NO3 solutions after HgC12-treated,respectively.Aquaporins play an important role in regulating water uptake and transport in roots.NH4+ and NO3- could stimulate activity of aquaporins,and Lp of roots in NH4NO3 solution was distinctly 77% higher than in distilled water.Nevertheless,Hg2+ can inhibit activity of aquaporins,and and Lp of roots decreased 22% in distilled water and 68% in NH4NO3 solution after treatment by HgC12 respectively.These evidences suggested that both Hg2+-sensitive aquaporins and ion channels existing in the protoplasm and vacuole membranes could regulate root water uptake,transport,and integral plant water balance.

  16. Estimation of fine root production, mortality and turnover with Minirhizotron in Larix gmelinii and Fraxinus mandshurica plantations

    Institute of Scientific and Technical Information of China (English)

    Jianwei SHI; Zhengquan WANG; Shuiqiang YU; Xiankui QUAN; Yue SUN; Shuxia JIA; Li MEI


    Fine root turnover is a major pathway for car-bon and nutrient cycling in forest ecosystems. However, to estimate fine root turnover, it is important to first understand the fine root dynamic processes associated with soil resource availability and climate factors. The objectives of this study were: (1) to examine patterns of fine root production and mortality in different seasons and soil depths in the Larix gmelinii and Fraxinus man-dshurica plantations, (2) to analyze the correlation of fine root production and mortality with environmental factors such as air temperature, precipitation, soil temperature and available nitrogen, and (3) to estimate fine root turn-over. We installed 36 Minirhizotron tubes in six mono-specific plots of each species in September 2003 in the Mao'ershan Experimental Forest Station. Minirhizotron sampling was conducted every two weeks from April 2004 to April 2005. We calculated the average fine root length, annual fine root length production and mortality using image data of Minirhizotrons, and estimated fine root turnover using three approaches. Results show that the average growth rate and mortality rate in L. melinii were markedly smaller than in F. mandshurica, and were high-est in the surface soil and lowest at the bottom among all the four soil layers. The annual fine root production and mortality in F. mandshurica were significantly higher than in L. gmelinii. The fine root production in spring and summer accounted for 41.7% and 39.7% of the total annual production in F. mandshurica and 24.0% and 51.2% in L. gmelinii. The majority of fine root mortality occurred in spring and summer for F. mandshurica and in summer and autumn for L. gmelinii. The turnover rate was 3.1 a-1 for L. gmelinii and 2.7 a-1 for F. mandshurica. Multiple regression analysis indicates that climate and soil resource factors together could explain 80% of the varia-tions of the fine root seasonal growth and 95% of the seasonal mortality. In conclusion, fine

  17. Flash-flood impacts cause changes in wood anatomy of Alnus glutinosa, Fraxinus angustifolia and Quercus pyrenaica. (United States)

    Ballesteros, J A; Stoffel, M; Bollschweiler, M; Bodoque, J M; Díez-Herrero, A


    Flash floods may influence the development of trees growing on channel bars and floodplains. In this study, we analyze and quantify anatomical reactions to wounding in diffuse-porous (Alnus glutinosa L.) and ring-porous (Fraxinus angustifolia Vahl. and Quercus pyrenaica Willd.) trees in a Mediterranean environment. A total of 54 cross-sections and wedges were collected from trees that had been injured by past flash floods. From each of the samples, micro-sections were prepared at a tangential distance of 1.5 cm from the injury to determine wounding-related changes in radial width, tangential width and lumen of earlywood vessels, and fibers and parenchyma cells (FPC). In diffuse-porous A. glutinosa, the lumen area of vessels shows a significant (non-parametric test, P-value <0.05) decrease by almost 39% after wounding. For ring-porous F. angustifolia and Q. pyrenaica, significant decreases in vessel lumen area are observed as well by 59 and 42%, respectively. Radial width of vessels was generally more sensitive to the decrease than tangential width, but statistically significant values were only observed in F. angustifolia. Changes in the dimensions of earlywood FPC largely differed between species. While in ring-porous F. angustifolia and Q. pyrenaica the lumen of FPC dropped by 22 and 34% after wounding, we observed an increase in FPC lumen area in diffuse-porous A. glutinosa of approximately 35%. Our data clearly show that A. glutinosa represents a valuable species for flash-flood research in vulnerable Mediterranean environments. For this species, it will be possible in the future to gather information on past flash floods with non-destructive sampling based on increment cores. In ring-porous F. angustifolia and Q. pyrenaica, flash floods leave less drastic, yet still recognizable, signatures of flash-flood activity through significant changes in vessel lumen area. In contrast, the use of changes in FPC dimensions appears less feasible for the determination of

  18. 49 CFR 230.69 - Ash pans. (United States)


    ... 49 Transportation 4 2010-10-01 2010-10-01 false Ash pans. 230.69 Section 230.69 Transportation... TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Ash Pans § 230.69 Ash pans. Ash pans shall be securely supported from mud-rings or frames with no part less than...

  19. Taller Stem Cleft Graft Experiment of Fraxinus chinensis and Syringa oblata%白蜡树与紫丁香属间高杆劈接试验

    Institute of Scientific and Technical Information of China (English)



    笔者在木犀科白蜡属与丁香属之间进行白蜡树与紫丁香的高杆劈接试验,平均嫁接成活率为88.8%,最高达96.4%,嫁接后经济效益明显提高。通过生长指标与接口径级的方差分析,表明这些指标是白蜡树高接紫丁香的关键因素;各生长指标的多重比较分析,表明苗高123.10 cm,地径3.75 cm,接口粗度2.43 cm以上的白蜡树是质量最佳的砧木,且当年紫丁香的分枝量可以增加到4.7条,达到市场对嫁接苗树形饱满度的要求;紫丁香的树冠分枝量与白蜡树的接口粗度和地径之间存在幂函数Yi=A+XBi的回归关系,其相关系数为0.911和0.925,相关性显著,可靠性高达0.999.旨在为白蜡和紫丁香的推广拓展了更大的分布空间。%The author did taller stem cleft grafting experiment of Fraxinus chinensis and Syringa oblata of Oleaceae ,average grafting survival rate was 88.8%,the maximum 96.4%,whose economic benefit increased after grafting .Variance analysis of growth index and interface diameter class showed that these indexes were key factors of grafting of Fraxinus chinensis and Syringa oblata; multiple comparison analysis of growth indexes showed that Fraxinus chinensis of seedling height 123.10 cm, ground diameter 3.75 cm, interface diameter above 2.43 cm was the best quality stock and branch number in-creased to 4.7 in current year ,which reached to the market plumpness need of grafting seedling;crown branches of Syringa oblata were regression relationship of Yi =A+XBi with interface diameter and ground diameter of Fraxinus chinensis, whose correlation coefficient was 0.911 and 0.925, significant correlation , reliability 0.999.The experiment expended more dis-tributed space of promotion of Fraxinus chinensis and Syringa oblata.

  20. Male-produced pheromone of Spathius agrili, a parasitoid introduced for the biological control of the invasive emerald ash borer, Agrilus planipennis. (United States)

    Cossé, Allard A; Petroski, Richard J; Zilkowski, Bruce W; Vermillion, Karl; Lelito, Jonathan P; Cooperband, Miriam F; Gould, Juli R


    The braconid wasp, Spathius agrili, has been released in the U.S. as a biocontrol agent for the invasive emerald ash borer (Coleoptera: Buprestidae: Agrilus planipennis), a destructive pest of ash trees (Fraxinus spp.). We identified and synthesized seven male-specific volatile compounds. Three of these, dodecanal, (4R,11E)-tetradecen-4-olide, and (Z)-10-heptadecen-2-one, were the key behaviorally active components in flight tunnel bioassays. Male specificity was demonstrated by gas chromatographic comparison of male and female volatile emissions and whole body extracts. Identifications were aided by coupled gas chromatographic-mass spectrometric (GC-MS) analysis, microchemical reactions, NMR, chiral GC analysis, and GC and MS comparison with authentic standards. Both the racemic and chiral forms of the γ-lactone, as well as both E- and Z-isomers were synthesized. Flight tunnel behavioral tests showed positive male and female S. agrili responses to both natural pheromone and synthetic blends, with upwind flight and landing on the source. Large field-cage tests, using yellow sticky traps baited with pheromone, captured approximately 50% of the released male and female wasps in 24-h periods. The use of pheromone-baited traps in the field could simplify the current detection method for determining parasitoid establishment (i.e., laboriously felling and peeling ash trees for recovery of S. agrili from infested EAB larvae).

  1. AshMeadowsNaucorid_CH (United States)

    US Fish and Wildlife Service, Department of the Interior — These data identify the areas where final critical habitat for the Ash Meadows Naucorid (Ambrysus amargosus) occur. "Nevada, Nye County. Point of Rocks Springs and...

  2. Fly ash. Quality recycling material

    Energy Technology Data Exchange (ETDEWEB)

    Blomster, D.; Leisio, C.


    Imatran Voima`s coal-fired power plants not only generate power and heat but also produce fly ash which is suitable raw material for recycling. This material for recycling is produced in the flue gas cleaning process. It is economical and, thanks to close quality control, is suitable for use as a raw material in the building materials industry, in asphalt production, and in earthworks. Structures made from fly ash are also safe from an environmental point of view. (orig.)

  3. ITER helium ash accumulation

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, J.T.; Hillis, D.L.; Galambos, J.; Uckan, N.A. (Oak Ridge National Lab., TN (USA)); Dippel, K.H.; Finken, K.H. (Forschungszentrum Juelich GmbH (Germany, F.R.). Inst. fuer Plasmaphysik); Hulse, R.A.; Budny, R.V. (Princeton Univ., NJ (USA). Plasma Physics Lab.)


    Many studies have shown the importance of the ratio {upsilon}{sub He}/{upsilon}{sub E} in determining the level of He ash accumulation in future reactor systems. Results of the first tokamak He removal experiments have been analysed, and a first estimate of the ratio {upsilon}{sub He}/{upsilon}{sub E} to be expected for future reactor systems has been made. The experiments were carried out for neutral beam heated plasmas in the TEXTOR tokamak, at KFA/Julich. Helium was injected both as a short puff and continuously, and subsequently extracted with the Advanced Limiter Test-II pump limiter. The rate at which the He density decays has been determined with absolutely calibrated charge exchange spectroscopy, and compared with theoretical models, using the Multiple Impurity Species Transport (MIST) code. An analysis of energy confinement has been made with PPPL TRANSP code, to distinguish beam from thermal confinement, especially for low density cases. The ALT-II pump limiter system is found to exhaust the He with maximum exhaust efficiency (8 pumps) of {approximately}8%. We find 1<{upsilon}{sub He}/{upsilon}{sub E}<3.3 for the database of cases analysed to date. Analysis with the ITER TETRA systems code shows that these values would be adequate to achieve the required He concentration with the present ITER divertor He extraction system.

  4. Volcanic ash infrared signature: realistic ash particle shapes compared to spherical ash particles


    A. Kylling; Kahnert, M.; Lindqvist, H.; T. Nousiainen


    The reverse absorption technique is often used to detect volcanic clouds from thermal infrared satellite measurements. From these measurements particle size and mass loading may also be estimated using radiative transfer modelling. The radiative transfer modelling usually assumes that the ash particles are spherical. We calculate thermal infrared optical properties of highly irregular and porous ash particles and compare these with mass- and volume-equivalent spherical models. Furtherm...

  5. Tissue-specific transcriptomics of the exotic invasive insect pest emerald ash borer (Agrilus planipennis.

    Directory of Open Access Journals (Sweden)

    Omprakash Mittapalli

    Full Text Available BACKGROUND: The insect midgut and fat body represent major tissue interfaces that deal with several important physiological functions including digestion, detoxification and immune response. The emerald ash borer (Agrilus planipennis, is an exotic invasive insect pest that has killed millions of ash trees (Fraxinus spp. primarily in the Midwestern United States and Ontario, Canada. However, despite its high impact status little knowledge exists for A. planipennis at the molecular level. METHODOLOGY AND PRINCIPAL FINDINGS: Newer-generation Roche-454 pyrosequencing was used to obtain 126,185 reads for the midgut and 240,848 reads for the fat body, which were assembled into 25,173 and 37,661 high quality expressed sequence tags (ESTs for the midgut and the fat body of A. planipennis larvae, respectively. Among these ESTs, 36% of the midgut and 38% of the fat body sequences showed similarity to proteins in the GenBank nr database. A high number of the midgut sequences contained chitin-binding peritrophin (248and trypsin (98 domains; while the fat body sequences showed high occurrence of cytochrome P450s (85 and protein kinase (123 domains. Further, the midgut transcriptome of A. planipennis revealed putative microbial transcripts encoding for cell-wall degrading enzymes such as polygalacturonases and endoglucanases. A significant number of SNPs (137 in midgut and 347 in fat body and microsatellite loci (317 in midgut and 571 in fat body were predicted in the A. planipennis transcripts. An initial assessment of cytochrome P450s belonging to various CYP clades revealed distinct expression patterns at the tissue level. CONCLUSIONS AND SIGNIFICANCE: To our knowledge this study is one of the first to illuminate tissue-specific gene expression in an invasive insect of high ecological and economic consequence. These findings will lay the foundation for future gene expression and functional studies in A. planipennis.

  6. Characterization of ashes from biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, F.J.; Hansen, L.A. [Technical Univ. of Denmark. Dept. of Chemical Engineering (Denmark); Soerensen, H.S. [Geological Survey of Denmark and Greenland (Denmark); Hjuler, K. [dk-TEKNIK. Energy and Environment (Denmark)


    One motivation for initiating the present project was that the international standard method of estimating the deposit propensity of solid fuels, of which a number of variants exist (e.g. ISO, ASTM, SD, DIN), has shown to be unsuitable for biomass ashes. This goal was addressed by the development of two new methods for the detection of ash fusibility behaviour based on Simultaneous Thermal Analysis (STA) and High Temperature Light Microscopy (HTLM), respectively. The methods were developed specifically for ashes from biofuels, but are suitable for coal ashes as well. They have been tested using simple salt mixtures, geological standards and samples from straw CHP and coal-straw PF combustion plants. All samples were run in a nitrogen atmosphere at a heating rate of 10 deg. C/min. In comparison with the standard method, the new methods are objective and have superior repeatability and sensitivity. Furthermore, the two methods enable the melting behavior to be characterized by a continuous measurement of melt fraction versus temperature. Due to this two-dimensional resolution of the results, the STA and HTLM methods provide more information than the standard method. The study of bottom ash and fly ash as well as deposit samples from straw test firings at the Haslev and Slagelse Combined Heat and Power plants resulted in a better understanding of mineral behaviour during straw grate firing. In these tests a number of straws were fired which had been carefully selected for having different qualities with respect to sort and potassium and chlorine contents. By studying bottom ashes from Slagelse it was found that the melting behaviour correlated with the deposition rate on a probe situated at the outlet part of the combustion zone. (EG)

  7. Controlling formaldehyde emissions with boiler ash. (United States)

    Cowan, Jennifer; Abu-Daabes, Malyuba; Banerjee, Sujit


    Fluidized wood ash reduces formaldehyde in air from about 20 to formaldehyde reduction increases with increasing moisture content of the ash. Sorption of formaldehyde to ash can be substantially accounted for by partitioning to the water contained in the ash followed by rate-controlling binding to the ash solids. Adsorption occurs at temperatures of up to 165 degrees C; oxidation predominates thereafter. It is proposed that formaldehyde could be stripped from an air stream in a fluidized bed containing ash, which could then be returned to a boiler to incinerate the formaldehyde.

  8. Ash in fire affected ecosystems (United States)

    Pereira, Paulo; Jordan, Antonio; Cerda, Artemi; Martin, Deborah


    Ash in fire affected ecosystems Ash lefts an important footprint in the ecosystems and has a key role in the immediate period after the fire (Bodi et al., 2014; Pereira et al., 2015). It is an important source of nutrients for plant recover (Pereira et al., 2014a), protects soil from erosion and controls soil hydrological process as runoff, infiltration and water repellency (Cerda and Doerr, 2008; Bodi et al., 2012, Pereira et al., 2014b). Despite the recognition of ash impact and contribution to ecosystems recuperation, it is assumed that we still have little knowledge about the implications of ash in fire affected areas. Regarding this situation we wanted to improve our knowledge in this field and understand the state of the research about fire ash around world. The special issue about "The role of ash in fire affected ecosystems" currently in publication in CATENA born from the necessity of joint efforts, identify research gaps, and discuss future cooperation in this interdisciplinary field. This is the first special issue about fire ash in the international literature. In total it will be published 10 papers focused in different aspects of the impacts of ash in fire affected ecosystems from several parts of the world: • Fire reconstruction using charcoal particles (Burjachs and Espositio, in press) • Ash slurries impact on rheological properties of Runoff (Burns and Gabet, in press) • Methods to analyse ash conductivity and sorbtivity in the laboratory and in the field (Balfour et al., in press) • Termogravimetric and hydrological properties of ash (Dlapa et al. in press) • Effects of ash cover in water infiltration (Leon et al., in press) • Impact of ash in volcanic soils (Dorta Almenar et al., in press; Escuday et al., in press) • Ash PAH and Chemical extracts (Silva et al., in press) • Microbiology (Barreiro et al., in press; Lombao et al., in press) We believe that this special issue will contribute importantly to the better understanding of

  9. Spatial Pattern for Fraxinus mandshurica Population in Second Growth Forest of Maoershan Mountains%帽儿山地区天然次生林中水曲柳种群格局分析

    Institute of Scientific and Technical Information of China (English)

    吴文娟; 王庆成; 许丽娟


    采用点格局分析法研究帽儿山地区天然次生林中水曲柳( Fraxinus mandshurica)不同龄级的种群空间分布格局及水曲柳与五角槭( Acer mono)、春榆( Ulmus propinqua)和白桦(Betula platyphylla )种群的空间关联性。结果表明:水曲柳龄级I林木个体在1~50 m尺度上呈现聚集分布;龄级II与龄级III的聚集程度较龄级I缓和;水曲柳龄级III与龄级I、龄级II林木个体在所有尺度上都表现为显著负相关或有负相关趋势。林分内主要树种种群有不同的空间格局分布,其中水曲柳在小尺度(10~22 m)上表现聚集分布,在大尺度则呈随机分布;五角槭、春榆和白桦在各个尺度下均呈聚集分布。种间关联性分析表明:水曲柳与五角槭、白桦和春榆在空间关联上都呈现正相关或有正相关趋势。水曲柳种群与群落内其它优势树种形成的斑块在群落中镶嵌分布,具有较高的群落稳定性;但水曲柳幼树在大树聚集的斑块不易存活,影响了水曲柳种群发展。%We analyzed spatial pattern distributions for different age classes of Fraxinus mandshurica and spatial associations be-tween Fraxinus mandshurica and other dominant species ( Acer mono, Ulmus propinqua and Betula platyphylla) for second growth forest in Maoershan Mountains .Individuals in age class I of Fraxinus mandshurica show clumped distribution at scales from 1 m to 50 m.Individuals of age class II and age class III show weaker clumped distribution than those of age class I.Age class III shows negative correlation with age class I at most scales, and it also exhibits negative association with age class II.Fraxinus mandshurica population shows clumped distribution at small-scale (10-22 m) and random dis-tribution at large-scale (23-50 m).The spatial pattern distributions of Acer mono, Ulmus propinqua and Betula platyphylla show clumped distribution.With the association analysis, they have

  10. Settling characteristics of some Indian fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Jain, M.K.; Sastry, B.S. [Indian Institute of Technology, Kharapur (India). Dept. of Mining Engineering


    The paper examines the aspects of the solid liquid separation (settling characteristics) of some of the fly ash obtained from coal-fired power plants in India. The application of a coagulating or flocculating agent (polymer) to improve the two properties as indicated is a typical industrial practice. The sources for this study comprise of fly ash, pond ash, and bottom ash and the settling characteristics are studied in conjunction with the flocculating agent polyacrylamide. 4 refs., 4 figs., 3 tabs.

  11. Gasification of high ash, high ash fusion temperature bituminous coals

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guohai; Vimalchand, Pannalal; Peng, WanWang


    This invention relates to gasification of high ash bituminous coals that have high ash fusion temperatures. The ash content can be in 15 to 45 weight percent range and ash fusion temperatures can be in C. to C. range as well as in excess of C. In a preferred embodiment, such coals are dealt with a two stage gasification process--a relatively low temperature primary gasification step in a circulating fluidized bed transport gasifier followed by a high temperature partial oxidation step of residual char carbon and small quantities of tar. The system to process such coals further includes an internally circulating fluidized bed to effectively cool the high temperature syngas with the aid of an inert media and without the syngas contacting the heat transfer surfaces. A cyclone downstream of the syngas cooler, operating at relatively low temperatures, effectively reduces loading to a dust filtration unit. Nearly dust- and tar-free syngas for chemicals production or power generation and with over 90%, and preferably over about 98%, overall carbon conversion can be achieved with the preferred process, apparatus and methods outlined in this invention.

  12. A method for treating bottom ash

    NARCIS (Netherlands)

    Rem, P.C.; Van Craaikamp, H.; Berkhout, S.P.M.; Sierhuis, W.; Van Kooy, L.A.


    A method for treating bottom ash from a waste incineration plant. The invention relates in particular to a method for treating bottom ash from a domestic waste incineration plant. In accordance with the invention bottom ash having a size ranging up to 2 mm is treated by removing a previously determi


    Institute of Scientific and Technical Information of China (English)


    The mechanical properties and durability ( mainly frost-resistance and carbonation resistance ) of fly ash-CaO-CaSO4 .2H2O hardened paste are studied. The relationship among durability of harden ed fly ash paste, the quantity and distribution of hydrates and the initial p aste texture of hardened fly ash paste is presented.

  14. 1999 international ash utilization symposium

    Energy Technology Data Exchange (ETDEWEB)



    112 papers were presented covering various aspects of the utilization of coal and other combustion products. Topics included fundamental chemistry and mineralogy, new products, health and environmental aspects, economic development issues, agricultural and mine reclamation applications, concrete and cement, and fly ash beneficiation technologies. Selected papers will be published in the journal 'Fuel'.

  15. Radioactivity of wood ash; Puun tuhkan radioaktiivisuus

    Energy Technology Data Exchange (ETDEWEB)

    Rantavaara, A.; Moring, M


    STUK (Finnish Radiation and Nuclear Safety Authority) has investigated natural and artificial radioactivity in wood ash and radiation exposure from radionuclides in ash since 1996. The aim was to consider both handling of ash and different ways of using ash. In all 87 ash samples were collected from 22 plants using entirely or partially wood for their energy production in 1996-1997. The sites studied represented mostly chemical forest industry, sawmills or district heat production. Most plants used fluidised bed combustion technique. Samples of both fly ash and bottom ash were studied. The activity concentrations of radionuclides in samples of, e.g., dried fly ash from fuel containing more than 80% wood were determined. The means ranged from 2000 to less than 50 Bq kg{sup -1}, in decreasing order: {sup 137}Cs, {sup 40}K, {sup 90}Sr, {sup 210}Pb,{sup 226}Ra, {sup 232}Th, {sup 134}Cs, {sup 235}U. In bott radionuclide contents decreased in the same order as in fly ash, but were smaller, and {sup 210}Pb was hardly detectable. The NH{sub 4}Ac extractable fractions of activities for isotopes of alkaline elements (K, Cs) in bottom ash were lower than in fly ash, whereas solubility of heavier isotopes was low. Safety requirements defined by STUK in ST-guide 12.2 for handling of peat ash were fulfilled at each of the sites. Use of ash for land-filling and construction of streets was minimal during the sampling period. Increasing this type of ash use had often needed further investigations, as description of the use of additional materials that attenuate radiation. Fertilisation of forests with wood ash adds slightly to the external irradiation in forests, but will mostly decrease doses received through use of timber, berries, mushrooms and game meat. (orig.)

  16. Use of Incineration MSW Ash: A Review

    Directory of Open Access Journals (Sweden)

    Charles H. K. Lam


    Full Text Available This study reviews the characteristics of municipal solid waste incineration (MSWI ashes, with a main focus on the chemical properties of the ashes. Furthermore, the possible treatment methods for the utilization of ash, namely, separation processes, solidification/stabilization and thermal processes, are also discussed. Seven types of MSWI ash utilization are reviewed, namely, cement and concrete production, road pavement, glasses and ceramics, agriculture, stabilizing agent, adsorbents and zeolite production. The practical use of MSWI ash shows a great contribution to waste minimization as well as resources conservation.

  17. Identifying glass compositions in fly ash

    Directory of Open Access Journals (Sweden)

    Katherine eAughenbaugh


    Full Text Available In this study, four Class F fly ashes were studied with a scanning electron microscope; the glassy phases were identified and their compositions quantified using point compositional analysis with k-means clustering and multispectral image analysis. The results showed that while the bulk oxide contents of the fly ashes were different, the four fly ashes had somewhat similar glassy phase compositions. Aluminosilicate glasses (AS, calcium aluminosilicate glasses (CAS, a mixed glass, and, in one case, a high iron glass were identified in the fly ashes. Quartz and iron crystalline phases were identified in each fly ash as well. The compositions of the three main glasses identified, AS, CAS, and mixed glass, were relatively similar in each ash. The amounts of each glass were varied by fly ash, with the highest calcium fly ash containing the most of calcium-containing glass. Some of the glasses were identified as intermixed in individual particles, particularly the calcium-containing glasses. Finally, the smallest particles in the fly ashes, with the most surface area available to react in alkaline solution, such as when mixed with portland cement or in alkali-activated fly ash, were not different in composition than the large particles, with each of the glasses represented. The method used in the study may be applied to a fly ash of interest for use as a cementing material in order to understand its potential for reactivity.

  18. Improving detection tools for emerald ash borer (Coleoptera: Buprestidae): comparison of multifunnel traps, prism traps, and lure types at varying population densities. (United States)

    Crook, Damon J; Francese, Joseph A; Rietz, Michael L; Lance, David R; Hull-Sanders, Helen M; Mastro, Victor C; Silk, Peter J; Ryall, Krista L


    The emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), is a serious invasive pest of North American ash (Fraxinus spp.) that has caused devastating mortality since it was first identified in North America in 2002. In 2012, we conducted field trapping assays that tested the efficacy of purple prism and fluon-coated green multifunnel (Lindgren funnel) traps. Traps were baited with combinations of several lures that were previously shown to be attractive to A. planipennis: manuka oil--a sesquiterpene-rich oil, (3Z)-hexenol--a green leaf volatile, or (3Z)-dodecen-12-olide [= (3Z)-lactone], a sex pheromone. Eighty-nine blocks (trap lines) were tested throughout nine states along the outer edges of the currently known A. planipennis infestation in North America. Trap catch was highest on fluon-coated green multifunnel traps, and trap detections at sites with low A. planipennis population density ranged from 72 to 76% for all trap and lure types tested. (3Z)-hexenol and (3Z)-lactone baited traps functioned as well as (3Z)-hexenol and manuka oil-baited traps. Independent of the lure used, detection rates on green fluon-coated multifunnel traps were comparable with glued purple prism traps in areas with low A. planipennis population densities.

  19. Utilization Of Rice Husk Ash

    Directory of Open Access Journals (Sweden)

    S. D. Nagrale


    Full Text Available India is a major rice producing country, and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy, producing energy through direct combustion and / or by gasification. About 20 million tones of Rice Husk Ash (RHA is produced annually. This RHA is a great environment threat causing damage to the land and the surrounding area in which it is dumped. Lots of ways are being thought of for disposing them by making commercial use of this RHA. RHA can be used as a replacement for concrete (15 to 25%.This paper evaluates how different contents of Rice Husk Ash added to concrete may influence its physical and mechanical properties. Sample Cubes were tested with different percentage of RHA and different w/c ratio, replacing in mass the cement. Properties like Compressive strength, Water absorption and Slump retention were evaluated.

  20. The Ashes of Marci Shore

    Directory of Open Access Journals (Sweden)

    Zbigniew Kopeć


    Full Text Available The article discusses Marci Shore’s social and historical thought, as presented in her books: Caviar and Ashes: A Warsaw Generation’s Life and Death in Marxism, 1918-1968 (2006, The Taste of Ashes (2013, and her essays recently published in Polish translation. The author follows the American historian, presenting her concept of modernity, but focuses on the main theme of her research: the contribution of Jewish writers, poets, artists, and intellectuals to the creation of Marxism. The author acknowledges the great value of Marci Shore’s writings, but argues that her panorama of the 20th century would be fuller if her discussion included a reflection on the religious attitude of many Jewish thinkers to Marxism and the USSR. This topic was discussed by Nikolai Berdyaev and Polish thinkers who published in pre-war social journals.

  1. Rapid toxicity screening of gasification ashes. (United States)

    Zhen, Xu; Rong, Le; Ng, Wei Cheng; Ong, Cynthia; Baeg, Gyeong Hun; Zhang, Wenlin; Lee, Si Ni; Li, Sam Fong Yau; Dai, Yanjun; Tong, Yen Wah; Neoh, Koon Gee; Wang, Chi-Hwa


    The solid residues including bottom ashes and fly ashes produced by waste gasification technology could be reused as secondary raw materials. However, the applications and utilizations of these ashes are very often restricted by their toxicity. Therefore, toxicity screening of ash is the primary condition for reusing the ash. In this manuscript, we establish a standard for rapid screening of gasification ashes on the basis of in vitro and in vivo testing, and henceforth guide the proper disposal of the ashes. We used three different test models comprising human cell lines (liver and lung cells), Drosophila melanogaster and Daphnia magna to examine the toxicity of six different types of ashes. For each ash, different leachate concentrations were used to examine the toxicity, with C0 being the original extracted leachate concentration, while C/C0 being subsequent diluted concentrations. The IC50 for each leachate was also quantified for use as an index to classify toxicity levels. The results demonstrated that the toxicity evaluation of different types of ashes using different models is consistent with each other. As the different models show consistent qualitative results, we chose one or two of the models (liver cells or lung cells models) as the standard for rapid toxicity screening of gasification ashes. We may classify the gasification ashes into three categories according to the IC50, 24h value on liver cells or lung cells models, namely "toxic level I" (IC50, 24h>C/C0=0.5), "toxic level II" (C/C0=0.05IC50, 24hIC50, 24hashes generated in gasification plants every day. Subsequently, appropriate disposal methods can be recommended for each toxicity category.

  2. Vitrification of municipal solid waste incineration fly ash using biomass ash as additives. (United States)

    Alhadj-Mallah, Moussa-Mallaye; Huang, Qunxing; Cai, Xu; Chi, Yong; Yan, JianHua


    Thermal melting is an energy-costing solution for stabilizing toxic fly ash discharged from the air pollution control system in the municipal solid waste incineration (MSWI) plant. In this paper, two different types of biomass ashes are used as additives to co-melt with the MSWI fly ash for reducing the melting temperature and energy cost. The effects of biomass ashes on the MSWI fly ash melting characteristics are investigated. A new mathematical model has been proposed to estimate the melting heat reduction based on the mass ratios of major ash components and measured melting temperature. Experimental and calculation results show that the melting temperatures for samples mixed with biomass ash are lower than those of the original MSWI fly ash and when the mass ratio of wood ash reaches 50%, the deformation temperature (DT), the softening, hemisphere temperature (HT) and fluid temperature (FT) are, respectively, reduced by 189°C, 207°C, 229°C, and 247°C. The melting heat of mixed ash samples ranges between 1650 and 2650 kJ/kg. When 50% wood ash is mixed, the melting heat is reduced by more than 700 kJ/kg for the samples studied in this paper. Therefore, for the vitrification treatment of the fly ash from MSW or other waste incineration plants, wood ash is a potential fluxing assistant.

  3. False deformation temperatures for ash fusibility associated with the conditions for ash preparation

    Energy Technology Data Exchange (ETDEWEB)

    Wall, T.F.; Gupta, S.K.; Gupta, R.P.; Sanders, R.H.; Creelman, R.A.; Bryant, G.W. [University of Newcastle, Callaghan, NSW (Australia). Cooperative Research Centre for Black Coal Utilization, Dept. of Chemical Engineering


    A study was made to investigate the fusibility behaviour of coal ashes of high ash fusion temperatures. Coals and ashes formed in the boiler were sampled in several Australian power stations, with laboratory ashes being prepared from the coals. The laboratory ashes gave lower values for the deformation temperature (DT) than the combustion ashes when the ash had low levels of basic oxide components. Thermo-mechanical analysis, quantitative X-ray diffraction and scanning electron microscopy were used to establish the mechanisms responsible for the difference. Laboratory ash is finer than combustion ash and it includes unreacted minerals (such as quartz, kaolinite and illite) and anhydrite (CaSO{sub 4}). Fusion events which appear to be characteristic of reacting illite, at temperatures from 900 to 1200{degree}C, were observed for the laboratory ashes, these being associated with the formation of melt phase and substantial shrinkage. The combustion ashes did not contain this mineral and their fusion events were observed at temperatures exceeding 1300{degree}C. The low DTs of coal ashes with low levels of basic oxides are therefore a characteristic of laboratory ash rather than that found in practical combustion systems. These low temperatures are not expected to be associated with slagging in pulverised coal fired systems. 10 refs., 3 figs., 2 tabs.

  4. Volcanic ash infrared signature: porous non-spherical ash particle shapes compared to homogeneous spherical ash particles


    A. Kylling; Kahnert, M.; Lindqvist, H.; T. Nousiainen


    The reverse absorption technique is often used to detect volcanic ash clouds from thermal infrared satellite measurements. From these measurements effective particle radius and mass loading may be estimated using radiative transfer modelling. The radiative transfer modelling usually assumes that the ash particles are spherical. We calculated thermal infrared optical properties of highly irregular and porous ash particles and compared these with mass- and volume-equivalent sp...

  5. Volcanic ash infrared signature: porous non-spherical ash particle shapes compared to homogeneous spherical ash particles (United States)

    Kylling, A.; Kahnert, M.; Lindqvist, H.; Nousiainen, T.


    The reverse absorption technique is often used to detect volcanic ash clouds from thermal infrared satellite measurements. From these measurements effective particle radius and mass loading may be estimated using radiative transfer modelling. The radiative transfer modelling usually assumes that the ash particles are spherical. We calculated thermal infrared optical properties of highly irregular and porous ash particles and compared these with mass- and volume-equivalent spherical models. Furthermore, brightness temperatures pertinent to satellite observing geometry were calculated for the different ash particle shapes. Non-spherical shapes and volume-equivalent spheres were found to produce a detectable ash signal for larger particle sizes than mass-equivalent spheres. The assumption of mass-equivalent spheres for ash mass loading estimates was found to underestimate mass loading compared to morphologically complex inhomogeneous ash particles. The underestimate increases with the mass loading. For an ash cloud recorded during the Eyjafjallajökull 2010 eruption, the mass-equivalent spheres underestimate the total mass of the ash cloud by approximately 30% compared to the morphologically complex inhomogeneous particles.

  6. [Effects of nitrogen fertilization on seasonal dynamics of soil microbial biomass carbon and nitrogen in Larix gmelinii and Fraxinus mandshurica plantations]. (United States)

    Jia, Shu-xi; Zhao, Yan-li; Sun, Yue; Chen, Li; Wang, Zheng-quan


    This paper studied the seasonal dynamics of soil microbial biomass C (Cmic) and N (Nmic), and of bacteria (cfu(b)), fungi (cfu(f)), and actinomyces (cfu(a)) in Larix gmelinii and Fraxinus mandshurica plantations in 2007-2008 under N fertilization. The two-year averaged soil Cmic and Nmic in L. gmelinii plantation were 13.8% and 18.3% lower than those in F. mandshurica plantation, respectively, but the soil Cmic and Nmic in the two plantations had similar seasonal patterns, being the lowest in May and the highest in September. The Cmic and Nmic, and the cfu(b), cfu(r), and cfu(a), were all greater in topsoil (0-10 cm) than in subsoil (10-20 cm), but the seasonal patterns of cfu(b), cfu(f), and cfu(a), were different from those of Cmic and Nmic. N fertilization decreased the Cmic and Nmic, and the cfu(b), cfu(f), and cfu(a), significantly, with the decrements of Cmic and Nmic being 24% and 63% in L. gmelinii plantation, and 51% and 68% in F. mandshurica, respectively, which suggested that N fertilization limited soil microbial biomass and altered soil microbial communities in the two plantations.

  7. Changes in polyamines, auxins and peroxidase activity during in vitro rooting of Fraxinus angustifolia shoots: an auxin-independent rooting model. (United States)

    Tonon, G; Kevers, C; Gaspar, T


    Among shoots of Fraxinus angustifolia Vahl raised in vitro, 76% rooted after culture on root induction medium for 5 days in darkness followed by culture on root expression medium for 15 days in light. The addition of 20.7 microM indole-butyric acid (IBA) to the root induction medium did not significantly increase the rooting percentage (88%). Putrescine, spermidine, cyclohexylamine (CHA) and aminoguanidine (AG) enhanced rooting up to 100% (98.66% for AG), when applied during root induction in the absence of IBA, otherwise these compounds inhibited rooting, as did spermine and difluoromethylornithine (DFMO) + difluoromethylarginine (DFMA). The root induction phase was characterized by a temporary increase in endogenous free indole-acetic acid (IAA) and putrescine concentrations during root induction, whereas the root expression phase was characterized by increased peroxidase activity and low concentrations of polyamines. These changes were specifically associated with the rooting process and did not depend on the presence of exogenous IBA, because application of exogenous IBA enhanced the amount of IAA in the cuttings but did not affect rooting or the pattern of changes in polyamines and peroxidase. The effects of CHA, AG and DFMO + DFMA on endogenous concentrations of auxins and polyamines highlight the close relationship between the effects of IAA and putrescine in root induction and suggest that polyamine catabolism has an important role in root formation and elongation.

  8. Volcanic ash impacts on critical infrastructure (United States)

    Wilson, Thomas M.; Stewart, Carol; Sword-Daniels, Victoria; Leonard, Graham S.; Johnston, David M.; Cole, Jim W.; Wardman, Johnny; Wilson, Grant; Barnard, Scott T.


    Volcanic eruptions can produce a wide range of hazards. Although phenomena such as pyroclastic flows and surges, sector collapses, lahars and ballistic blocks are the most destructive and dangerous, volcanic ash is by far the most widely distributed eruption product. Although ash falls rarely endanger human life directly, threats to public health and disruption to critical infrastructure services, aviation and primary production can lead to significant societal impacts. Even relatively small eruptions can cause widespread disruption, damage and economic loss. Volcanic eruptions are, in general, infrequent and somewhat exotic occurrences, and consequently in many parts of the world, the management of critical infrastructure during volcanic crises can be improved with greater knowledge of the likely impacts. This article presents an overview of volcanic ash impacts on critical infrastructure, other than aviation and fuel supply, illustrated by findings from impact assessment reconnaissance trips carried out to a wide range of locations worldwide by our international research group and local collaborators. ‘Critical infrastructure’ includes those assets, frequently taken for granted, which are essential for the functioning of a society and economy. Electricity networks are very vulnerable to disruption from volcanic ash falls. This is particularly the case when fine ash is erupted because it has a greater tendency to adhere to line and substation insulators, where it can cause flashover (unintended electrical discharge) which can in turn cause widespread and disruptive outages. Weather conditions are a major determinant of flashover risk. Dry ash is not conductive, and heavy rain will wash ash from insulators, but light rain/mist will mobilise readily-soluble salts on the surface of the ash grains and lower the ash layer’s resistivity. Wet ash is also heavier than dry ash, increasing the risk of line breakage or tower/pole collapse. Particular issues for water


    Energy Technology Data Exchange (ETDEWEB)



    The Coal Ash Resources Research Consortium (CARRC, pronounced �cars�) is the core coal combustion by-product (CCB) research group at the Energy & Environmental Research Center (EERC). CARRC focuses on performing fundamental and applied scientific and engineering research emphasizing the environmentally safe, economical use of CCBs. CARRC member organizations, which include utilities and marketers, are key to developing industry-driven research in the area of CCB utilization and ensuring its successful application. CARRC continued the partnership of industry partners, university researchers, and the U.S. Department of Energy (DOE) addressing needs in the CCB industry through technical research and development projects. Technology transfer also continued through distribution and presentation of the results of research activities to appropriate audiences, with emphasis on reaching government agency representatives and end users of CCBs. CARRC partners have evolved technically and have jointly developed an understanding of the layers of social, regulatory, legal, and competition issues that impact the success of CCB utilization as applies to the CCB industry in general and to individual companies. Many CARRC tasks are designed to provide information on CCB performance including environmental performance, engineering performance, favorable economics, and improved life cycle of products and projects. CARRC activities from 1993�1998 included a variety of research tasks, with primary work performed in laboratory tasks developed to answer specific questions or evaluate important fundamental properties of CCBs. The tasks summarized in this report are 1) The Demonstration of CCB Use in Small Construction Projects, 2) Application of CCSEM (computer-controlled scanning electron microscopy) for Coal Combustion By-Product Characterization, 3) Development of a Procedure to Determine Heat of Hydration for Coal Combustion By-Products, 4) Investigation of the Behavior of High

  10. As and Se interactions with fly ashes

    Directory of Open Access Journals (Sweden)

    M. Díaz-Somoano


    Full Text Available Arsenic and selenium are toxic elements present incoal in trace concentrations that may be emitted tothe environment during coal conversion processes.However, it is possible to retain volatile arsenic andselenium compounds in the fly ashes originated bythe process, the proportions retained depending onthe characteristics of the ashes and processconditions. This work is focused on the capture ofthese elements in fly ashes in simulated coalcombustion and gasification atmospheres inlaboratory scale reactors.

  11. Volcanic ash at Santiaguito dome complex, Guatemala (United States)

    Hornby, Adrian; Kendrick, Jackie; Lavallée, Yan; Cimarelli, Corrado; von Aulock, Felix; Rhodes, Emma; Kennedy, Ben; Wadsworth, Fabian


    Dome-building volcanoes often suffer episodic explosions. Examination of eruptive activity at Santiaguito dome complex (Guatemala) reveals that gas-and-ash explosions are concordant with rapid inflation/ deflation cycles of the active dome. During these explosions strain is accommodated along marginal faults, where tensional fracture mechanisms and friction dominate, complicating the model of ash generation by bubble rupture in magma. Here, we describe textural features, morphology and petrology of ash collected before, during and after a dome collapse event at Santiaguito dome complex on the 28th November 2012. We use QEM-scan (on more than 35000 grains), laser diffraction granulometry and optical and scanning microscopy to characterise the samples. The ash samples show a bimodal size distribution and a range of textures, crystal content and morphologies. The ash particles are angular to sub-angular and are relatively dense, so do not appear to comprise of pore walls. Instead the ash is generally blocky (>70%), similar to the products of shear magma failure. The ash samples show minor variation before, during and after dome collapse, specifically having a smaller grain size and a higher fraction of phenocrysts fragments before collapse. Textural analysis shows vestiges of chemically heterogeneous glass (melt) filaments originating from the crystals and crosscut by fragmentation during volcanic ash formation. High-velocity friction can induce melting of dome lavas, producing similar disequilibrium melting textures. This work shows the importance of deformation mechanisms in ash generation at lava domes and during Vulcanian activity.

  12. Adhesion Strength of Biomass Ash Deposits

    DEFF Research Database (Denmark)

    Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao


    . Therefore, timely removal of ash deposits is essential for optimal boiler operation. In order to improve the qualitative and quantitative understanding of deposit shedding in boilers, this study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash...... deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000 °C. Subsequently, the deposits were sheared off by an electrically controlled arm, and the corresponding adhesion strength was measured. The results reveal the effect of temperature, ash/deposit composition......, sintering duration, and steel type on the adhesion strength....

  13. Combustion of stoker ash in a CFBC

    Energy Technology Data Exchange (ETDEWEB)

    Jia, L.; Anthony, E.J. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre


    The ash generated from petroleum coke fired stokers at Georgia Pacific in Wisconsin has an elevated carbon content and a higher fuel value. This paper presents results of a study in which the stoker ash was test fired at the CANMET Energy Technology Centre in a bench scale circulating fluidized bed combustor (CFBC). The objective was to determine if firing the stoker ash in its 'as received' state (with a 40 per cent moisture content) is a viable fuel option for Georgia Pacific's FBC boiler to save fuel costs, or if it should be co-fired with petroleum coke. Mixtures of the stoker ash and petroleum coke were also test fired. Results indicate that the stoker ash alone cannot sustain combustion. However, good ignition and even bed temperature is possible with premixed coke and 10 per cent less moisture content. Emissions of sulphur dioxides, nitrogen oxides carbon monoxide were the same as for firing petroleum coke alone. In addition, the co-firing of stoker ash and petroleum coke did not negatively affect the tendency to foul, compared to firing coke alone. The amount of ash generated from the FBC boiler was high due to the high ash content. An economic evaluation showed that firing a 20/80 coke/stoker ash mixture can save approximately 22 per cent of the limestone usage compared to coke firing alone, if the Ca/S molar ratio remain the same. 8 refs., 2 tabs., 1 fig.

  14. Solidification on fly ash, Yugoslav experiences

    Energy Technology Data Exchange (ETDEWEB)

    Knezevic, D. [Mining Institute, Belgrade (Yugoslavia); Popov, S.; Salatic, D. [Faculty of Mining and Geology, Belgrade (Yugoslavia)


    A study was performed on ashes produced in the combustion process of coal from the Kosovo coal basin, in order to determine the potential and conditions of ash self-solidification. Investigations showed that the ash properties allows for the transformation into a solid mass through a controlled mixing with water. The optimal concentration of ash is 50 percent and the hydro-mixture is behaving as a Bingham plastic fluid. Solidification is obtained in a relatively short period (within 3 to 5 days) without additives. The resulting solidified mass is very consistent and stable

  15. Comparison of leachable trace element levels in coal gasifier ash with levels in power plant ash

    Energy Technology Data Exchange (ETDEWEB)

    Bombaugh, K.J.; Milosavljevic, M.; Janes, T.K.


    The levels of 14 trace elements in leachates from three types of ash of a common origin coal were compared. The study was conducted over a one year period at the Kosovo plant in Obilic, Yugoslavia comparing coal gasifier ash with fly ash and bottom ash from a coal-fired power plant using lignite from the Dobro Solo mine. Results obtained indicate that levels of Sb, As, Be, Cr, Cu, Pb, Mo, Ni and Zn in gasifier ash leachate were similar to those in fly ash leachate. Barium levels in gasifier ash leachate averaged 2.7 times that in fly ash and selenium levels averaged 0.33 times. The average ratio for the total set was 0.99. The set average, relative to bottom ash, was 2.1 with the nickel ratio differing significantly from the average. Metal oxides, CaO, MgO, Na/SUB/2O, K/SUB/2O and MgO; in the Kosovo gasifier ash were found at levels similar to those in Kosovo fly ash, and except for K/SUB/2O, were approximately twice those in bottom ash. Concentration levels of all components showed relatively small variations averaging 50% of their mean annual concentration over the test period. (14 refs.)

  16. Treatment of fly ash for use in concrete (United States)

    Boxley, Chett [Park City, UT


    A process for treating fly ash to render it highly usable as a concrete additive. A quantity of fly ash is obtained that contains carbon and which is considered unusable fly ash for concrete based upon foam index testing. The fly ash is mixed with a quantity of spray dryer ash (SDA) and water to initiate a geopolymerization reaction and form a geopolymerized fly ash. The geopolymerized fly ash is granulated. The geopolymerized fly ash is considered usable fly ash for concrete according to foam index testing. The geopolymerized fly ash may have a foam index less than 40%, and in some cases less than 20%, of the foam index of the untreated fly ash. An optional alkaline activator may be mixed with the fly ash and SDA to facilitate the geopolymerization reaction. The alkaline activator may contain an alkali metal hydroxide, carbonate, silicate, aluminate, or mixtures thereof.

  17. 10 Risk to Ash from Emerald Ash Borer: Can Biological Control Prevent the Loss of Ash Stands (United States)

    Ash trees were once relatively free of serious, major diseases and insect pests in North America until the arrival of EAB, which was first detected in North America in Michigan in 2002. As of February 2014, EAB had been detected in 22 U.S. states and two Canadian provinces, killing millions of ash ...

  18. Characteristics of spanish fly ashes

    Directory of Open Access Journals (Sweden)

    de Luxán, M. P.


    Full Text Available The purpose of this study is the characterization of fly ashes produced by Spanish thermoelectric power plants, according to sampling taken in 1981 and 1982. The study takes in the following characteristics: physical characteristics (size distribution of particles, ...; chemical ones (chemical analysis...; and mineralogical ones (application of instrumental techniques of X-ray diffraction and infrared absorption spectroscopy. From a general point of view, it can be said that the samples of Spanish fly ashes are similar to those produced in other countries. The results obtained are a contribution to the knowledge of Spanish fly ashes and form part of the antecedents of investigations carried out in subsequent years.

    Este trabajo tiene por objeto la caracterización de las cenizas volantes producidas en las Centrales Termoeléctricas españolas, según un muestreo realizado entre 1981 y 1982. El estudio comprende las siguientes características: físicas (distribución del tamaño de partículas,...; químicas (análisis químico, …; y mineralógicas (aplicación de las técnicas instrumentales de difracción de rayos X y espectroscopía de absorción infrarroja. Desde un punto de vista general, se puede afirmar que las muestras de ceniza volante estudiadas son semejantes a las producidas en otros países. Los resultados obtenidos son una aportación al conocimiento de las cenizas volantes españolas y forman parte de los antecedentes de las investigaciones llevadas a cabo en años posteriores.

  19. Comparison of male and female emerald ash borer (Coleoptera: Buprestidae) responses to phoebe oil and (Z)-3-hexenol lures in light green prism traps. (United States)

    Grant, Gary G; Poland, Therese M; Ciaramitaro, Tina; Lyons, D Barry; Jones, Gene C


    We conducted trapping experiments for the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae) in Michigan, U.S.A., and Ontario, Canada, to compare unbaited light green sticky prism traps with traps baited with phoebe oil, (Z)-3-hexenol (Z3-6:OH), or blends of other green leaf volatiles (GLVs) with Z3-6:OH. Traps were placed in the lower canopy of ash trees (Fraxinus spp.). Catches with Z3-6:OH-baited traps showed a significant male bias and these traps caught significantly more males than the unbaited controls at both sites. They were also superior to phoebe oil-baited traps and those baited with GLV blends. Catches with phoebe oil showed a significant female bias but there was no difference in the number of females captured between traps baited with phoebe oil or Z3-6:OH lures. Catches were analyzed at regular time intervals to examine the response of A. planipennis to the lures over the course of the flight season. Z3-6:OH-baited traps consistently caught more males than the controls at each interval throughout the flight season. Catches of females with Z3-6:OH and phoebe oil were significantly better than the controls early in the flight season but declined to control levels by midseason. Our results suggest that Z3-6:OH-baited green traps placed in the ash canopy would be a superior lure for detecting and monitoring A. planipennis throughout the flight season.

  20. Electrodialytic removal of heavy metals from fly ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul


    The aim of the Ph.D. work was to develop the electrodialytic remediation method for removal of heavy metals from fly ashes. The work was focused on two types of fly ashes: fly ashes from wood combustion and fly ashes from municipal solid waste incineration.......The aim of the Ph.D. work was to develop the electrodialytic remediation method for removal of heavy metals from fly ashes. The work was focused on two types of fly ashes: fly ashes from wood combustion and fly ashes from municipal solid waste incineration....

  1. Biomass fly ash in concrete: SEM, EDX and ESEM analysis

    Energy Technology Data Exchange (ETDEWEB)

    Shuangzhen Wang; Larry Baxter; Fernando Fonseca [Brigham Young University, Provo, UT (USA). Department of Chemical Engineering


    This document summarizes microscopy study of concrete prepared from cement and fly ash (25% fly ash and 75% cement by weight), which covers coal fly ash and biomass fly ash. All the fly ash concrete has the statistical equal strength from one day to one year after mix. Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) and environmental scanning electron microscopy (ESEM) analysis show that both coal and biomass fly ash particles undergo significant changes of morphology and chemical compositions in concrete due to pozzolanic reaction, although biomass fly ash differs substantially from coal fly ash in its fuel resources. 8 refs., 17 figs., 1 tab.


    Directory of Open Access Journals (Sweden)

    Ravinder Pal Singh


    Full Text Available Rice Husk ash and fly ash are agricultural and coal wastes respectively. These are produced in abundance globally and poses risk to health as well as environment. Thus their effective, conducive and eco-friendly utilization has always been a challenge for scientific community. The fly ash has been used as reinforcement for improved mechanical properties of composites (1,3-5,9. Rice husk ash can also be used for similar applications as its composition is almost similar to that of fly ash. This paper mainly deals with identification ofcharacteristics of both the fly ash and rice husk ash using spectroscopic and microscopic analysis. SEM, XRD,XRF and FTIR spectroscopic methods were used for the characterization of treated and untreated ashes. The results were compared and it was observed that both ashes possesses nearly same chemical phases and otherfunctional groups thus proposing the use of rice husk ash as reinforcement like fly ash in Metal Matrix Composites (MMCs specifically for wear resistance applications.

  3. Column leaching from biomass combustion ashes

    DEFF Research Database (Denmark)

    Maresca, Alberto; Astrup, Thomas Fruergaard


    The utilization of biomass combustion ashes for forest soil liming and fertilizing has been addressed in literature. Though, a deep understanding of the ash chemical composition and leaching behavior is necessary to predict potential benefits and environmental risks related to this practice...

  4. Fly ash-reinforced thermoplastic starch composites

    Energy Technology Data Exchange (ETDEWEB)

    Ma, X.F.; Yu, J.G.; Wang, N. [Tianjin University, Tianjin (China). School of Science


    As a by-product from the combustion of pulverized coal, fly ash was, respectively, used as the reinforcement for formamide and urea-plasticized thermoplastic starch (FUPTPS) and glycerol-plasticized thermoplastic starch (GPTPS). The introduction of fly ash improved tensile stress from 4.56 MPa to 7.78 MPa and Youngs modulus increased trebly from 26.8 MPa to 84.6 MPa for fly ash-reinforced FUPTPS (A-FUPTPS), while tensile stress increased from 4.55 MPa to 12.86 MPa and Youngs modulus increased six times from 76.4 MPa to 545 MPa for fly ash-reinforced GPTPS (A-GPTPS). X-ray diffractograms illustrated that fly ash destroyed the formation of starch ordered crystal structure, so both A-GPTPS and FUPTPS could resist the starch re-crystallization (retrogradation). Also fly ash improved water resistance of TPS. As shown by rheology, during the thermoplastic processing, the extruder screw speed effectively adjusted the flow behavior of A-FUPTPS, while the increasing of the processing temperature effectively ameliorated the flow behavior of A-GPTPS. However, superfluous ash contents (e.g., 20 wt%) worsened processing fluidity and resulted in the congregation of fly ash in FUPTPS matrix (tested by SEM) rather than in GPTPS matrix. This congregation decreased the mechanical properties and water resistance of the materials.

  5. Wet physical separation of MSWI bottom ash

    NARCIS (Netherlands)

    Muchova, L.


    Bottom ash (BA) from municipal solid waste incineration (MSWI) has high potential for the recovery of valuable secondary materials. For example, the MSWI bottom ash produced by the incinerator at Amsterdam contains materials such as non-ferrous metals (2.3%), ferrous metals (8-13%), gold (0.4 ppm),

  6. Physicochemical characterization of Spanish fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    Querol, X.; Umana, J.C.; Alastuey, A.; Bertrana, C.; Lopez-Soler, A.; Plana, F.


    This article summarizes the results obtained from the physical, chemical, and mineralogical characterization of 14 fly ash samples. Major features that influence the utilization of each fly ash for zeolite synthesis are evidenced, and several fly ash types were selected as potential high-quality starting material for zeolite synthesis and ceramic applications. The main parameters influencing this selection were relatively small grain size; high Al and Si contents; high glass content; low CaO, S, and Fe contents; and relatively low heavy metal concentration. The Compostilla and Cou He fly ashes have high potential applications because of the low content of major impurities (such as Ca, Fe, and S) and the low content of soluble hazardous elements. The Espiel, Escucha, Los Barrios, As Pontes, Soto de Ribera, Meirama, Narcea, and Teruel fly ashes have important application potential, but this potential is slightly limited by the intermediate content of nonreactive impurities, such as Fe and Ca. The La Robla fly ash is of moderate interest, since the relatively high Ca and Fe oxide contents may reduce its potential applications. Finally, the Puertollano fly ash also has limited application because of the very high concentration of some heavy metals such as As, Cd, Ge, Hg, Pb, and Zn. From a mineralogical point of view, the Compostilla, Espiel, and Soto de Ribera fly ashes show the highest aluminum-silicate glass content and, consequently, the highest industrial application potential.

  7. Physiochemical characterization of Spanish fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    Querol, X.; Umana, J.C.; Alastuey, A.; Bertrana, C.; Lopez Soler, A.; Plana, F.


    This article summarizes the results obtained from the physical, chemical, and mineralogical characterization of 14 fly ash samples. Major features that influence the utilization of each fly ash for zeolite synthesis are evidenced, and several fly ash types were selected as potential high-quality starting material for zeolite synthesis and ceramic applications. The main parameters influencing this selection were relatively small grain size; high Al and Si contents; high glass content; low CaO, S, and Fe contents; and relatively low heavy metal concentration. The Compostilla and Dou He fly ashes have high potential applications because of the low content of major impurities (such as Ca, Fe, and S) and the low content of soluble hazardous elements. The Espiel, Escucha, Los Barrios, As Pontes, Soto de Ribera, Meirama, Narcea, and Teruel fly ashes have important application potential, but this potential is slightly limited by the intermediate content of nonreactive impurities, such as Fe and Ca. The La Robla fly ash is of moderate interest, since the relatively high Ca and Fe oxide contents may reduce its potential applications. Finally, the Puertollano fly ash also has limited application because of the very high concentration of some heavy metals such as As, Cd, Ge, Hg, Pb, and Zn. From a mineralogical point of view, the Compostilla, Espiel, and Soto de Ribera fly ashes show the highest aluminum-silicate glass content and, consequently, the highest industrial application potential. (author)

  8. Effects of colemanite waste, coal bottom ash, and fly ash on the properties of cement

    Energy Technology Data Exchange (ETDEWEB)

    Kula, I.; Olgun, A.; Erdogan, Y.; Sevinc, V. [Celal Bayar University, Manisa (Turkey)


    The physical and chemical properties of colemanite ore waste from concentrator, coal bottom ash, fly ash, cement+ash mixtures, cement+colemanite ore waste, and their effects on the mechanical properties of concrete were investigated. These materials with different proportion were substituted with Portland cement. Physical properties such as setting time, volume expansion, and compressive strength were determined and compared to reference mixture and Turkish standards (TS). The results showed that cement replacement materials had clear effects on the mechanical properties. The use of fly ash and bottom ash even at the concentration of 25% showed either comparable or better result compared to reference mixture. Although replacement of Portland cement by 9 wt.% of colemanite ore waste causes reduction in the compressive strength, the values obtained are within the limit of TS. As a result, colemanite ore waste, fly ash, and bottom ash may be used as cementitious materials.

  9. Properties and Leachability of Self-Compacting Concrete Incorporated with Fly Ash and Bottom Ash (United States)

    Kadir, Aeslina Abdul; Ikhmal Haqeem Hassan, Mohd; Jamaluddin, Norwati; Bakri Abdullah, Mohd Mustafa Al


    The process of combustion in coal-fired power plant generates ashes, namely fly ash and bottom ash. Besides, coal ash produced from coal combustion contains heavy metals within their compositions. These metals are toxic to the environment as well as to human health. Fortunately, treatment methods are available for these ashes, and the use of fly ash and bottom ash in the concrete mix is one of the few. Therefore, an experimental program was carried out to study the properties and determine the leachability of selfcompacting concrete incorporated with fly ash and bottom ash. For experimental study, self-compacting concrete was produced with fly ash as a replacement for Ordinary Portland Cement and bottom ash as a replacement for sand with the ratios of 10%, 20%, and 30% respectively. The fresh properties tests conducted were slump flow, t500, sieve segregation and J-ring. Meanwhile for the hardened properties, density, compressive strength and water absorption test were performed. The samples were then crushed to be extracted using Toxicity Characteristic Leaching Procedure and heavy metals content within the samples were identified accordingly using Atomic Absorption Spectrometry. The results demonstrated that both fresh and hardened properties were qualified to categorize as self-compacting concrete. Improvements in compressive strength were observed, and densities for all the samples were identified as a normal weight concrete with ranges between 2000 kg/m3 to 2600 kg/m3. Other than that, it was found that incorporation up to 30% of the ashes was safe as the leached heavy metals concentration did not exceed the regulatory levels, except for arsenic. In conclusion, this study will serve as a reference which suggests that fly ash and bottom ash are widely applicable in concrete technology, and its incorporation in self-compacting concrete constitutes a potential means of adding value to appropriate mix and design.

  10. Investigation on Leaching Behaviour of Fly Ash and Bottom Ash Replacement in Self-Compacting Concrete (United States)

    Kadir, Aeslina Abdul; Ikhmal Haqeem Hassan, Mohd; Bakri Abdullah, Mohd Mustafa Al


    Fly ash and bottom ash are some of the waste generated by coal-fired power plants, which contains large quantities of toxic and heavy metals. In recent years, many researchers have been interested in studying on the properties of self-compacting concrete incorporated with fly ash and bottom ash but there was very limited research from the combination of fly ash and bottom ash towards the environmental needs. Therefore, this research was focused on investigating the leachability of heavy metals of SCC incorporated with fly ash and bottom ash by using Toxicity Characteristic Leaching Procedure, Synthetic Precipitation Leaching Procedure and Static Leaching Test. The samples obtained from the coal-fired power plant located at Peninsula, Malaysia. In this study, the potential heavy metals leached out from SCC that is produced with fly ash as a replacement for Ordinary Portland Cement and bottom ash as a substitute for sand with the ratios from 10% to 30% respectively were designated and cast. There are eight heavy metals of concern such as As, Cr, Pb, Zn, Cu, Ni, Mn and Fe. The results indicated that most of the heavy metals leached below the permissible limits from the United States Environmental Protection Agency and World Health Organization limit for drinking water. As a conclusion, the minimum leaching of the heavy metals from the incorporation of fly ash and bottom ash in self-compacting concrete was found in 20% of fly ash and 20% of bottom ash replacement. The results also indicate that this incorporation could minimize the potential of environmental problems.

  11. Construction procedures using self hardening fly ash (United States)

    Thornton, S. I.; Parker, D. G.


    Fly ash produced in Arkansas from burning Wyoming low sulfur coal is self-hardening and can be effective as a soil stabilizing agent for clays and sands. The strength of soil-self hardening fly ash develops rapidly when compacted immediately after mixing. Seven day unconfined compressive strengths up to 1800 psi were obtained from 20% fly ash and 80% sand mixtures. A time delay between mixing the fly ash with the soil and compaction of the mixture reduced the strength. With two hours delay, over a third of the strength was lost and with four hours delay, the loss was over half. Gypsum and some commercial concrete retarders were effective in reducing the detrimental effect of delayed compaction. Adequate mixing of the soil and fly ash and rapid compaction of the mixtures were found to be important parameters in field construction of stabilized bases.

  12. Role of GA3, GA4 and Uniconazole-P in Controlling Gravitropism and Tension Wood Formation in Fraxinus mandshurica Rupr. var. japonica Maxim. Seedlings

    Institute of Scientific and Technical Information of China (English)


    GA3 and GA4 (gibberellins) play an important role in controlling gravitropism and tension wood formation in woody angiosperms. In order to improve our understanding of the role of GA3 and GA4 on xylem cell formation and the G-layer, we studied the effect of GA3 and GA4 and uniconazole-P, which is an inhibitor of GA biosynthesis, on tension wood formation by gravity in Fraxinus mandshurica Rupr. var. japonica Maxim. seedlings. Forty seedlings were divided into two groups;one group was placed upright and the other tilted. Each group was further divided into four sub-groups subjected to the following treatments: 3.43 × 10-9 μmol acetone as control, 5.78 × 10-8 μmol gibberellic acid (GA3), 6.21 × 10-8 μmol GA4, and 6.86 × 10-8 μmol uniconazole-P. During the experimental period, GAs-treated seedlings exhibited negative gravitropism,whereas application of uniconazole-P inhibited negative gravitropic stem bending. GA3 and GA4 promoted wood fibers that possessed a gelatinous layer on the upper side, whereas uniconazole-P inhibited wood formation but did not inhibit the differentiation of the gelatinous layer in wood fibers on the upper side. These results suggest that: (i) both the formation of gelatinous fibers and the quantity of xylem production are important for the negative gravitropism in horizontally-positioned seedlings; (ii) GA3 and GA4 affect wood production more than differentiation of the gelatinous layer in wood fibers;G-layer development may be regulated by other hormones via the indirect-role of GA3 and GA4 in horizontally-positioned F. mandshurica seedlings rather than the direct effect of GAs; and (iii) the mechanism for upward wood stem bending is different to the newly developed shoot bending in reaction to gravity in this species.

  13. Laboratory Studies of Ice Nucleation on Volcanic Ash (United States)

    Tolbert, M. A.; Schill, G. P.; Genareau, K. D.


    Ice nucleation on volcanic ash controls both ash aggregation and cloud glaciation, which affect human respiratory health, atmospheric transport, and global climate. We have performed laboratory studies of the depositional and immersion freezing efficiency of three distinct samples of volcanic ash using Raman Microscopy coupled to an environmental cell. Ash from the Fuego (Basaltic Ash, Guatemala), Soufriere Hills (Andesetic Ash, Montserrat), and Taupo (Rhyolitic Ash, New Zealand) volcanoes were chosen to represent different geographical locations and silica content. All ash samples were quantitatively analyzed for both percent crystallinity and mineralogy using X-ray diffraction. We find that all three samples of volcanic ash are excellent depositional ice nuclei, nucleating ice at ice saturation ratios of 1.05 ± 0.1. For immersion freezing, however, only the Taupo ash exhibited efficient heterogeneous ice nucleation activity. Similar to recent studies on mineral dust, we suggest that the mineralogy of volcanic ash may dictate its ice nucleation activity in the immersion mode.

  14. Treatment of fly ash for use in concrete (United States)

    Boxley, Chett; Akash, Akash; Zhao, Qiang


    A process for treating fly ash to render it highly usable as a concrete additive. A quantity of fly ash is obtained that contains carbon and which is considered unusable fly ash for concrete based upon foam index testing. The fly ash is mixed with an activator solution sufficient to initiate a geopolymerization reaction and for a geopolymerized fly ash. The geopolymerized fly ash is granulated. The geopolymerized fly ash is considered usable fly ash for concrete according to foam index testing. The geopolymerized fly ash may have a foam index less than 35% of the foam index of the untreated fly ash, and in some cases less than 10% of the foam index of the untreated fly ash. The activator solution may contain an alkali metal hydroxide, carbonate, silicate, aluminate, or mixtures thereof.

  15. Treatment of fly ash for use in concrete (United States)

    Boxley, Chett; Akash, Akash; Zhao, Qiang


    A process for treating fly ash to render it highly usable as a concrete additive. A quantity of fly ash is obtained that contains carbon and which is considered unusable fly ash for concrete based upon foam index testing. The fly ash is mixed with an activator solution sufficient to initiate a geopolymerization reaction and for a geopolymerized fly ash. The geopolymerized fly ash is granulated. The geopolymerized fly ash is considered usable fly ash for concrete according to foam index testing. The geopolymerized fly ash may have a foam index less than 35% of the foam index of the untreated fly ash, and in some cases less than 10% of the foam index of the untreated fly ash. The activator solution may contain an alkali metal hydroxide, carbonate, silicate, aluminate, or mixtures thereof.

  16. Selective catalytic reduction of NO by ammonia over oil shale ash and fly ash catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Changtao Yue; Shuyuan Li [University of Petroleum, Beijing (China). State Key Lab of Heavy Oil Processing


    Acid rain and urban air pollution, produced mainly by pollutants such as SOX and NOX and other volatile organic compounds, has become the most serious environmental problem. The selective catalytic reduction (SCR) of NO with NH{sub 3} in the presence of oxygen is a wellproven method to limit the NOX emissions. The work in this field has been the subject of much research in recent years. In this paper, NO reduction with NH{sub 3} over oil shale ash or fly ash catalysts was studied. Fe, Cu, V or Ni as active elements was loaded by adding aqueous solutions of the metal nitrate over the oil shale ash or fly ash support. The activities of the catalysts for NO removal were measured in a fixed-bed reactor. According to the results, oil shale ash or fly ash, after pre-treatment, can be reasonably used as the SCR catalyst support to remove NO from flue gas. Cu gave the highest catalytic activity and NO conversion for fly ash while V for oil shale ash. As the support, fly ash is more feasible than oil shale ash. Because of their low cost and high efficiency, the catalysts should be used in the SCR process. Further research on this subject is necessary in the future to understand more details of the SCR system and issue of pollution control. 9 refs., 2 figs., 2 tabs.

  17. The climatic impact of supervolcanic ash blankets

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Morgan T.; Sparks, R.S.J. [University of Bristol, Department of Earth Sciences, Bristol (United Kingdom); Valdes, Paul J. [University of Bristol, School of Geographical Sciences, Bristol (United Kingdom)


    Supervolcanoes are large caldera systems that can expel vast quantities of ash, volcanic gases in a single eruption, far larger than any recorded in recent history. These super-eruptions have been suggested as possible catalysts for long-term climate change and may be responsible for bottlenecks in human and animal populations. Here, we consider the previously neglected climatic effects of a continent-sized ash deposit with a high albedo and show that a decadal climate forcing is expected. We use a coupled atmosphere-ocean General Circulation Model (GCM) to simulate the effect of an ash blanket from Yellowstone volcano, USA, covering much of North America. Reflectivity measurements of dry volcanic ash show albedo values as high as snow, implying that the effects of an ash blanket would be severe. The modeling results indicate major disturbances to the climate, particularly to oscillatory patterns such as the El Nino Southern Oscillation (ENSO). Atmospheric disruptions would continue for decades after the eruption due to extended ash blanket longevity. The climatic response to an ash blanket is not significant enough to investigate a change to stadial periods at present day boundary conditions, though this is one of several impacts associated with a super-eruption which may induce long-term climatic change. (orig.)

  18. Pozzolanic Reaction Kinetics of Coal Ashes

    Institute of Scientific and Technical Information of China (English)

    ZHENG Hongwei; WANG Zhijuan; QIAN Jueshi; SONG Yuanming; WANG Zhi


    The pozzolanic reactivity was determined by the hydration kinetics of pozzolanic reaction based on the fact that the hydration products of active SiO_2 and Al_2O_3 with lime were soluble in dilute hydrochloric acid.The results show that the pozzolanic reaction of active SiO_2 and Al2O3 of coal ashes follows apparent first-order kinetics.The reaction rate constant of FBC ashes is greater than that of PC ashes,while the activation energy of the former is lower than that of the latter.It is confirmed that the pozzolanic activity of fluidized bed combustion(FBC)ashes is significantly higher than that of PC ashes,and the reaction barrier of the former is lower than that of the latter,because the microstructures of FBC ashes,such as mineralogical composition,morphology and polymerization degree of [SiO_4]and[AlO_6]are more favorable to the pozzolanic activity development than those of PC ashes.

  19. Marine mesocosm bacterial colonisation of volcanic ash (United States)

    Witt, Verena; Cimarelli, Corrado; Ayris, Paul; Kueppers, Ulrich; Erpenbeck, Dirk; Dingwell, Donald; Woerheide, Gert


    Volcanic eruptions regularly eject large quantities of ash particles into the atmosphere, which can be deposited via fallout into oceanic environments. Such fallout has the potential to alter pH, light and nutrient availability at local scales. Shallow-water coral reef ecosystems - "rainforests of the sea" - are highly sensitive to disturbances, such as ocean acidification, sedimentation and eutrophication. Therefore, wind-delivered volcanic ash may lead to burial and mortality of such reefs. Coral reef ecosystem resilience may depend on pioneer bacterial colonisation of the ash layer, supporting subsequent establishment of the micro- and ultimately the macro-community. However, which bacteria are involved in pioneer colonisation remain unknown. We hypothesize that physico-chemical properties (i.e., morphology, mineralogy) of the ash may dictate bacterial colonisation. The effect of substrate properties on bacterial colonisation was tested by exposing five substrates: i) quartz sand ii) crystalline ash (Sakurajima, Japan) iii) volcanic glass iv) carbonate reef sand and v) calcite sand of similar grain size, in controlled marine coral reef aquaria under low light conditions for six months. Bacterial communities were screened every month by Automated Ribosomal Intergenic Spacer Analysis of the 16S-23S rRNA Internal Transcribed Spacer region. Multivariate statistics revealed discrete groupings of bacterial communities on substrates of volcanic origin (ash and glass) and reef origin (three sands). Analysis of Similarity supported significantly different communities associated with all substrates (p=0.0001), only quartz did not differ from both carbonate and calcite sands. The ash substrate exhibited the most diverse bacterial community with the most substrate-specific bacterial operational taxonomic units. Our findings suggest that bacterial diversity and community composition during colonisation of volcanic ash in a coral reef-like environment is controlled by the

  20. Adhesion Strength of Biomass Ash Deposits

    DEFF Research Database (Denmark)

    Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao


    This study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000°C. Subsequently, the deposits were sheared off with the help of an electrically...... controlled arm. Higher sintering temperatures resulted in greater adhesion strengths, with a sharp increase observed near the melting point of the ash. Repetition of experiments with fixed operation conditions revealed considerable variation in the obtained adhesion strengths, portraying the stochastic...

  1. Fly Ash Disposal in Ash Ponds: A Threat to Ground Water Contamination (United States)

    Singh, R. K.; Gupta, N. C.; Guha, B. K.


    Ground water contamination due to deposition of fly ash in ash ponds was assessed by simulating the disposal site conditions using batch leaching test with fly ash samples from three thermal power plants. The periodic analysis of leachates was performed for selected elements, Fe, Cu, Ni, Cr, Pb and Cd in three different extraction solutions to determine the maximum amount that can be leached from fly ash. It was observed that at low pH value, maximum metals are released from the surface of the ash into leachate. The average concentration of these elements found in ground water samples from the nearby area of ash ponds shows that almost all the metals except `Cr' are crossing the prescribed limits of drinking water. The concentration of these elements at this level can endanger public health and environment.

  2. Fly Ash Disposal in Ash Ponds: A Threat to Ground Water Contamination (United States)

    Singh, R. K.; Gupta, N. C.; Guha, B. K.


    Ground water contamination due to deposition of fly ash in ash ponds was assessed by simulating the disposal site conditions using batch leaching test with fly ash samples from three thermal power plants. The periodic analysis of leachates was performed for selected elements, Fe, Cu, Ni, Cr, Pb and Cd in three different extraction solutions to determine the maximum amount that can be leached from fly ash. It was observed that at low pH value, maximum metals are released from the surface of the ash into leachate. The average concentration of these elements found in ground water samples from the nearby area of ash ponds shows that almost all the metals except `Cr' are crossing the prescribed limits of drinking water. The concentration of these elements at this level can endanger public health and environment.

  3. Effect of Fly Ash on the Electrical Conductivity of Concretes

    Institute of Scientific and Technical Information of China (English)


    The fly ash occasionally has high content of iron oxide and carbon that are good electrical conducting components. This paper investigates the effect of the fly ash used as mineral admixtures on the electrical conductivity of concretes. The electrical properties of concretes using 3 kinds of fly ash with different iron oxide contents have been studied. Experimental results show that at the same fly ash dosage the resistivity of concrete using fly ash with high content of iron oxide is slightly lower than that with low content of iron oxide. However, the concrete resistivity after 14d increases as fly ash dosage increases regardless of iron oxide content in fly ash.

  4. Biomass fly ash in concrete: Mixture proportioning and mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Shuangzhen Wang; Amber Miller; Emilio Llamazos; Fernando Fonseca; Larry Baxter [Brigham Young University, Provo, UT (USA). Department of Chemical Engineering


    ASTM C 618 prohibits use of biomass fly ashes in concrete. This document compares the properties of biomass fly ashes from cofired (herbaceous with coal), pure wood combustion and blended (pure wood fly ash blended with coal fly ash) to those of coal fly ash in concrete. The results illustrate that with 25% replacement (wt%) of cement by fly ash, the compressive strength (one day to one year) and the flexure strength (at 56th day curing) of cofired and blended biomass fly ash concrete is statistically equal to that of two coal fly ash concrete in this investigation (at 95% confidence interval). This implies that biomass fly ash with co-firing concentration within the concentration interest to commercial coal-biomass co-firing operations at power plants and blended biomass fly ash within a certain blending ratio should be considered in concrete. 37 refs., 10 figs., 2 tabs.

  5. Rice Husk Ash Derived Zeolite Blended with Water Hyacinth Ash for Enhanced Adsorption of Cadmium Ions


    G. W. Mbugua; H. M. Mbuvi; J. W. Muthengia


    In order to helpcurtail or imposesustained control to the offensive water hyacinth plant,it is essential to explore ways of generatingwater remediation materials from it. In the current study, the capacity and efficacy of water hyacinth ash (WHA),its insoluble residue (WHAR) and rice husk ash (RHA)to remove cadmium ionsand methylene blue from contaminated water was investigated. Mixtures of the two ashes were used to formulatezeolitic materialsby hydrothermal reactions. Material A, ZMA was pr...

  6. Electrodialytic removal of heavy metals from different fly ashes. Influence of heavy metal speciation in the ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.; Villumsen, Arne


    Electrodialytic Remediation has recently been suggested as a potential method for removal of heavy metals from fly ashes. In this work electrodialytic remediation of three different fly ashes, i.e. two municipal solid waste incinerator (MSWI) fly ashes and one wood combustion fly ash was studied...

  7. ASH External Web Portal (External Portal) - (United States)

    Department of Transportation — The ASH External Web Portal is a web-based portal that provides single sign-on functionality, making the web portal a single location from which to be authenticated...

  8. AshMeadowsSpeckledDace_CH (United States)

    US Fish and Wildlife Service, Department of the Interior — These data identify the areas where final critical habitat for the Ash Meadows Amargosa pupfish (Cyprinodon nevadensis mionectes) occur. "Nevada, Nye County: Each of...

  9. AshMeadowsAmargosaPupfish_CH (United States)

    US Fish and Wildlife Service, Department of the Interior — These data identify the areas where final critical habitat for the Ash Meadows Amargosa pupfish (Cyprinodon nevadensis mionectes) occur. "Nevada, Nye County: Each of...

  10. Cementing Properties of Oil Shale Ash

    Institute of Scientific and Technical Information of China (English)


    The oil crisis has prompted renewed interest in direct burning of oil shale as an alternative energy source.A major problem in this process is the large portion of ash produced.The cementing properties of this ash were investigated to determine its applicability as a building material.By means of XRD, IR, NMR and ICP, we have studied the effects of burning temperature on the reactivity of ash.Maximum reactivity was obtained with ash samples produced at 700 °C to 900 °C.In this range, the strength of oil-shale-based material, with properties similar to cement, which is composed of oil shale and several other kinds of solid wastes, can achieve the standard of 42.5# cement.Our study has provided an experimental foundation and theoretical base for a massive utilization of oil shale.

  11. Volcanic Ash Advisory Database, 1983-2003 (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Volcanic ash is a significant hazard to aviation and can also affect global climate patterns. To ensure safe navigation and monitor possible climatic impact, the...

  12. Clay Improvement with Burned Olive Waste Ash

    Directory of Open Access Journals (Sweden)

    Utkan Mutman


    Full Text Available Olive oil is concentrated in the Mediterranean basin countries. Since the olive oil industries are incriminated for a high quantity of pollution, it has become imperative to solve this problem by developing optimized systems for the treatment of olive oil wastes. This study proposes a solution to the problem. Burned olive waste ash is evaluated for using it as clay stabilizer. In a laboratory, bentonite clay is used to improve olive waste ash. Before the laboratory, the olive waste is burned at 550°C in the high temperature oven. The burned olive waste ash was added to bentonite clay with increasing 1% by weight from 1% to 10%. The study consisted of the following tests on samples treated with burned olive waste ash: Atterberg Limits, Standard Proctor Density, and Unconfined Compressive Strength Tests. The test results show promise for this material to be used as stabilizer and to solve many of the problems associated with its accumulation.

  13. Study on the Chemical Constituents from the Barks of Fraxinus chinensis%大叶白蜡树皮的化学成分研究

    Institute of Scientific and Technical Information of China (English)

    肖正华; 蔡玉鑫; 阿依别克·马力克


    OBJECTIVE: To isolate and identify the chemical constituents of the barks of Fraxinus chinensis. METHODS: The compounds were isolated by means of ethanol extraction, silica gel column chromatography and thin-layer chromatography. The structures were determined by UV, IR, NMR and MS spectral analysis. RESULTS: Eleven compounds were isolated and identified as caffic acid (1), syringaldehyde (2), quercetin (3), quercetin-3-O-β-D-glucoside (4), lute-olin-7-O-β-D-glucoside (5), baica-lein (6), quercetin-3-O-α-L-rhamnoside (7), syringin (8), luteolin (9), wogonin (10), rutin (11). Compounds 3, 4, 5, 6, 7, 9, 10 were all isolated from the plant for the first time. CONCLUSION: The trial results provide basis for the further study of F. Chinensis.%目的:分离并鉴定大叶白蜡树皮的化学成分.方法:采用乙醇提取、硅胶柱色谱层析、制备薄层色谱等方法分离样品,所得单体通过紫外光谱、红外光谱、核磁共振及质谱等波谱分析法确定结构.结果:从样品中分得11个化合物,分别为咖啡酸(1)、丁香醛(2)、槲皮素(3)、槲皮素-3-O-β-D-葡萄糖苷(4)、木犀草素-7-D-β-D-葡萄糖苷(5)、黄芩素(6)、槲皮素-3-O-α-L-鼠李糖苷(7)、丁香苷(8)、木犀草素(9)、汉黄芩素(10)、芦丁(11).其中化合物3、4、5、6、7、9、10均为首次从该属植物中分得.结论:本试验结果可为大叶白蜡树的进一步研究提供试验依据.

  14. Control of Negative Gravitropism and Tension Wood Formation by Gibberellic Acid and Indole Acetic Acid in Fraxinus mandshurica Rupr. var.japonica Maxim Seedlings

    Institute of Scientific and Technical Information of China (English)


    In the present study, we investigated the role of gibberellic acid (GA3) and indole acetic acid (IAA) in the gravity response of stems and tension wood formation using two-year-old stems of Fraxinus mandshurica Rupr. var.japonica Maxim seedlings. Forty-five seedlings were used and divided into nine groups that included five seedlings in each group. Seedlings were treated with applications of GA3 alone at concentrations of 2.89 × 10-8and 2.89 × 10-7 μmol/L, IAA alone at concentrations of 5.71×10-8 and 5.71 ×10-7 μmol/L, or their combination to the apical bud of the stem using a micropipette. Seedlings were positioned horizontally after the first treatment.The same treatments were repeated six times per week. At the end of the experiment, all seedlings were harvested. Then, stem segments were cut under a light microscope. Application of exogenous GA3 at the higher concentration stimulated the upward bending of stems, whereas exogenous IAA had no effect. A synergistic effect of GA3 and IAA on upward stem bending was observed following application of the two combinations of GA3 and IAA. Moreover, application of exogenous GA3 at the higher dose stimulated wood formation on both the upper and lower sides of the stems, whereas the mixture of GA3 and IAA had a synergistic effect on wood formation in horizontal stems. Application of exogenous IAA alone at the lower concentration (5.71×10-8 μ mol/L) or application of a mixture of the higher concentrations of GA3 (2.89 × 10-7 μmol/L) and IAA (5.71×10-7 μmol/L) inhibited the development of gelatinous fibers (the G-layer) of tension wood on the upper side of the horizontal stems. The differentiation of gelatinous fibers of tension wood was not inhibited by GA3when it was applied alone, whereas the development of the gelatinous fibers of tension wood was strongly affected by the application of IAA. The findings of the present study suggest that the development of the G-layer is not related to the dose of GA3, but

  15. Flue gas desulfurization gypsum and fly ash

    Energy Technology Data Exchange (ETDEWEB)


    The Cumberland Fossil Plant (CUF) is located in Stewart County, Tennessee, and began commercial operation in 1972. This is the Tennessee Valley Authority`s newest fossil (coal-burning) steam electric generating plant. Under current operating conditions, the plant burns approximately seven million tons of coal annually. By-products from the combustion of coal are fly ash, approximately 428,000 tons annually, and bottom ash, approximately 115,000 tons annually. Based on historical load and projected ash production rates, a study was initially undertaken to identify feasible alternatives for marketing, utilization and disposal of ash by-products. The preferred alternative to ensure that facilities are planned for all by-products which will potentially be generated at CUF is to plan facilities to handle wet FGD gypsum and dry fly ash. A number of different sites were evaluated for their suitability for development as FGD gypsum and ash storage facilities. LAW Engineering was contracted to conduct onsite explorations of sites to develop information on the general mature of subsurface soil, rock and groundwater conditions in the site areas. Surveys were also conducted on each site to assess the presence of endangered and threatened species, wetlands and floodplains, archaeological and cultural resources, prime farmland and other site characteristics which must be considered from an environmental perspective.

  16. Stabilization/solidification of TSCA incinerator ash

    Energy Technology Data Exchange (ETDEWEB)

    Spence, R.D.; Trotter, D.R.; Francis, C.L.; Morgan, I.L.


    Stabilization/solidification is a well-known waste treatment technique that utilizes different additives and processes. The Phoenix Ash Technology of the Technical Innovation Development Engineering Company is such a technique that uses Cass C fly ash and mechanical pressure to make brick waste forms out of solid wastes, such as the bottom ash from the Toxic Substances Control Act incinerator at the Oak Ridge K-25 Site. One advantage of this technique is that no volume increase over the bulk volume of the bottom ash occurs. This technique should have the same high pH stabilization for Resource Conservation and Recovery Act metals as similar techniques. Also, consolidation of the bottom ash minimizes the potential problems of material dispersion and container corrosion. The bottom ash was spiked with {sup 99}{Tc} to test the effectiveness of the bricks as a physical barrier. The {sup 99}{Tc} leachability index measured for these bricks was 6.8, typical for the pertechnetate anion in cementitious waste forms, indicating that these bricks have accessible porosity as high as that of other cementitious waste forms, despite the mechanical compression, higher waste form density, and water resistant polymer coating.

  17. Influencia de Especies Arbóreas Implantadas sobre Parámetros Biológicos y Bioquímicos en un Suelo Forestal de Chubut, Argentina Influence of Implanted tree Species on Biological and Biochemical Parameters in a Forest soil of Chubut, Argentina

    Directory of Open Access Journals (Sweden)

    Diana N Effron


    Full Text Available Se estudió la influencia de algunas especies forestales sobre propiedades biológicas y bioquímicas de un suelo, con el propósito de contribuir a establecer criterios que logren un desarrollo sustentable para un sistema forestal. El sitio de estudio es un suelo forestal de Chubut, en la Patagonia Argentina. Se tomaron muestras superficiales de suelo de tres parcelas con una especie dominante cada una: Roble (Quercus robur, Fresno (Fraxinus excelsior L. y Pino radiata (Pinus radiata D. Don.. En ellas se determinaron carbono de respiración, actividad deshidrogenasa, actividad fosfatasa ácida, número de bacterias totales y amilolíticas, actinomicetes y hongos totales, mientras que en las hojas se determinó fósforo. Los resultados mostraron diferencias importantes de estos parámetros para las diferentes especies estudiadas, diferencias que son explicadas por la composición química de las diferentes especies vegetales.The influence of some tree species on biological and biochemical properties of a forest soil was studied with the purpose of establishing criteria to achieve a sustainable development of a forest system. The study site is a forest soil of Chubut, in the Argentinean Patagonia. Surface soil samples were taken of three plots with a dominant species each one: Oak (Quercus robur, Ash (Fraxinus excelsior L. and Radiata Pine (Pinus radiata D. Don.. Microbial respiration, dehydrogenase and acid phosphatase activities, counts of aerobic and amylolytic bacteria, actinomyces and fungi were determined in soil samples, while phosphorous was determines in leaves. The results showed important differences of these parameters for the different species considered in the study, differences that are explained by the different chemical composition of the vegetal species.

  18. Wildland fire ash: future research directions (United States)

    Bodí, Merche B.; Martins, Deborah A.; Cerdà, Artemi; Balfour, Victoria N.; Santin, Cristina; Doerr, Stefan H.; Pereira, Paulo; Mataix-Solera, Jorge


    Ash is a key component of the forest fires affected land (Cerdà, 1998; Bodí et al., 2011; Pereira et al., 2013a). Ash controls the hydrological processes and determines the water repellency (Dlapa et al., 2012) and the infiltration rates (Cerdà and Doerr, 2008;). Moreover, ash is the key factor on runoff initiation and then on the soil erosion. Little is known about the impact of ash in different ecosystems, but during the last decade a substantial increase in the papers that show the role of ash in the Earth and Soil System were published (Bodí et al., 2012; Pereira et al., 2013b).. Ash is being found as the key component of the post-fire pedological, geomorphological and hydrological response after forest fires (Fernández et al., 2012; Martín et al., 2012; Bodí et al., 2013; Guénon et al., 2013; Pereira et al., 2013c). A recent State-of-the-Art review about wildland fire ash (Bodí et al., 2014) compiles the knowledge regarding the production, composition and eco-hydro-geomorphic effects of wildland fire ash. In the present paper we indicate the knowledge gaps detected and suggest topics that need more research effort concerning: i) data collection and analysis techniques: a) To develop standardized sampling techniques that allow cross comparison among sites and avoid inclusion of the underlying soil unless the burned surface soil forms part of the ash layer, b) To develop standardized methods to define and characterize ash, including its color, physical properties such as particle size distribution or density, proportion of pyrogenic C, chemical and biological reactivity and persistence in the environment, c) To validate, calibrate and test measurements collected through remote sensing with on-the-ground measurements. ii) ash production, deposition redistribution and fate: d) To untangle the significance of the effects of maximum temperature reached during combustion versus the duration of heating, e) To understand the production of ash by measuring its

  19. Sulphation characteristics of paper sludge ash

    Energy Technology Data Exchange (ETDEWEB)

    Roh, S.A. [Environmental Systems Research Center, Korea Inst. of Machinery and Materials, Daejeon (Korea, Republic of); Kim, S.D. [Environmental Systems Research Center, Korea Inst. of Machinery and Materials, Daejeon (Korea, Republic of). Dept. of Chemical and Biomolecular Engineering


    Landfills are no longer a viable solution for the disposal of sludge produced from waste water treatment plants because of the decrease in available space, rising fees and growing environmental concerns. However, thermal utilization of this waste may be an economic and sustainable disposal solution. Co-combustion of low heating value sludge with fossil fuels has a positive effect for sulfur dioxide (SO{sub 2}) emissions due to the low sulphur content of biomass fuels and increased sulphur retention in the ash. The sulphur retention is attributed to the formation of sulphates, such as CaSO{sub 4}, K{sub 2}SO{sub 4} and Na{sub 2}SO{sub 4}. The amount of fuel-ash-related sulphur sorption increases during co-combustion. Therefore, sorbents for sulphur reduction may not be required if proper control of the biomass feed is maintained. This paper presented a study in which the sulphation characteristics of calcium-rich paper sludge ash were determined for the use of co-combustion of biomass and coal. The calcium in the paper sludge ash came from the limestone filler used in the manufacturing process to increase the density and whiteness of the paper at 2 paper mills in Korea. A thermobalance reactor along with XRD and SEM-EDX were used for the analysis of sulphated ash to determine the effects of sulphation temperature, particle size and SO{sub 2} concentration on sulphation conversion. The activation energy and pre-exponential factor of sulphation reaction of sludge ash were determined based on the uniform-reaction model. X-ray diffraction analysis revealed that most of the sulphation compounds were CaSO{sub 4}. The sulphation occurred uniformly throughout the ash and the CaSO{sub 4} did not block the outer pore of the sludge ash. The uniform distributions of CaO and other inert minerals in the ash resulted in uniform sulphation with good penetration of SO{sub 2} into pores of the sludge ash without pore blocking during sulphation of CaO. 13 refs., 1 tab., 9 figs.

  20. Ash transformation during co-firing coal and straw

    DEFF Research Database (Denmark)

    Zheng, Yuanjing; Jensen, Peter Arendt; Jensen, Anker Degn;


    Co-firing straw with coal in pulverized fuel boilers can cause problems related to fly ash utilization, deposit formation, corrosion and SCR catalyst deactivation due to the high contents of Cl and K in the ash. To investigate the interaction between coal and straw ash and the effect of coal...... quality on fly ash and deposit properties, straw was co-fired with three kinds of coal in an entrained flow reactor. The compositions of the produced ashes were compared to the available literature data to find suitable scaling parameters that can be used to predict the composition of ash from straw...... importantly, by reaction with Al and Si in the fly ash. About 70-80% K in the fly ash appears as alumina silicates while the remainder K is mainly present as sulphate. Lignite/straw co-firing produces fly ash with relatively high Cl content. This is probably because of the high content of calcium...

  1. Scale-Up and Demonstration of Fly Ash Ozonation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Rui Afonso; R. Hurt; I. Kulaots


    The disposal of fly ash from the combustion of coal has become increasingly important. When the fly ash does not meet the required specification for the product or market intended, it is necessary to beneficiate it to achieve the desired quality. This project, conducted at PPL's Montour SES, is the first near full-scale ({approx}10 ton/day), demonstration of ash ozonation technology. Bituminous and sub bituminous ashes, including two ash samples that contained activated carbon, were treated during the project. Results from the tests were very promising. The ashes were successfully treated with ozone, yielding concrete-suitable ash quality. Preliminary process cost estimates indicate that capital and operating costs to treat unburned carbon are competitive with other commercial ash beneficiation technologies at a fraction of the cost of lost sales and/or ash disposal costs. This is the final technical report under DOE Cooperative Agreement No.: DE-FC26-03NT41730.

  2. Influence of Fly Ash, Bottom Ash, and Light Expanded Clay Aggregate on Concrete

    Directory of Open Access Journals (Sweden)

    S. Sivakumar


    Full Text Available Invention of new methods in strengthening concrete is under work for decades. Developing countries like India use the extensive reinforced construction works materials such as fly ash and bottom ash and other ingredients in RCC construction. In the construction industry, major attention has been devoted to the use of fly ash and bottom ash as cement and fine aggregate replacements. In addition, light expanded clay aggregate has been introduced instead of coarse aggregate to make concrete have light weight. This paper presents the results of a real-time work carried out to form light weight concrete made with fly ash, bottom ash, and light expanded clay aggregate as mineral admixtures. Experimental investigation on concrete mix M20 is done by replacement of cement with fly ash, fine aggregate with bottom ash, and coarse aggregate with light expanded clay aggregate at the rates of 5%, 10%, 15%, 20%, 25%, 30%, and 35% in each mix and their compressive strength and split tensile strength of concrete were discussed for 7, 28, and 56 days and flexural strength has been discussed for 7, 28, and 56 days depending on the optimum dosage of replacement in compressive strength and split tensile strength of concrete.

  3. Comparative study on the characteristics of fly ash and bottom ash geopolymers. (United States)

    Chindaprasirt, Prinya; Jaturapitakkul, Chai; Chalee, Wichian; Rattanasak, Ubolluk


    This research was conducted to compare geopolymers made from fly ash and ground bottom ash. Sodium hydroxide (NaOH) and sodium silicate (Na(2)SiO(3)) solutions were used as activators. A mass ratio of 1.5 Na(2)SiO(3)/NaOH and three concentrations of NaOH (5, 10, and 15M) were used; the geopolymers were cured at 65 degrees C for 48 h. A Fourier transform infrared spectrometer (FT-IR), differential scanning calorimeter (DSC), and scanning electron microscope (SEM) were used on the geopolymer pastes. Geopolymer mortars were also prepared in order to investigate compressive strength. The results show that both fly ash and bottom ash can be utilized as source materials for the production of geopolymers. The properties of the geopolymers are dependent on source materials and the NaOH concentration. Fly ash is more reactive and produces a higher degree of geopolymerization in comparison with bottom ash. The moderate NaOH concentration of 10 M is found to be suitable and gives fly ash and bottom ash geopolymer mortars with compressive strengths of 35 and 18 MPa.

  4. Effect of ash components on the ignition and burnout of high ash coals

    Energy Technology Data Exchange (ETDEWEB)

    Feng, B.; Yan, R.; Zheng, C.G. [Huazhong University of Science and Technology, Wuhan (China). National Laboratory of Coal Combustion


    The effect of the ash components on the ignition and burnout of four Chinese high ash coals were studied by thermogravimetric analysis. To investigate the influence of the ash components, comparative experiments were carried out with original, deashed and impregnated coals. Eleven types of ash components, such as SiO{sub 2}, CaCO{sub 3}, MgO, Na{sub 2}CO{sub 3}, K{sub 2}CO{sub 3}, Al{sub 2}O{sub 3}, TiO{sub 2}, Fe{sub 2}O{sub 3}, FeS{sub 2}, NH{sub 4}Fe(SO{sub 4}){sub 2}{center_dot}12H{sub 2}O and FeSO{sub 4},(NH{sub 4}){center_dot}6H{sub 2}O were used in the present study. It was found that most of the ash components have negative effects. The strong influence of some ash components suggests that the combustion characteristics of high ash coal may be determined by the ash composition. 5 refs., 2 figs., 2 tabs.

  5. The influence of satellite populations of emerald ash borer on projected economic costs in U.S. communities, 2010-2020. (United States)

    Kovacs, Kent F; Mercader, Rodrigo J; Haight, Robert G; Siegert, Nathan W; McCullough, Deborah G; Liebhold, Andrew M


    The invasion spread of the emerald ash borer (Agrilus planipennis Fairmaire) (Coleoptera: Buprestidae) is characterized by the formation of satellite populations that expand and coalesce with the continuously invading population front. As of January 2010, satellite infestations have been detected in 13 states and two Canadian provinces. Understanding how newly established satellite populations may affect economic costs can help program managers to justify and design prevention and control strategies. We estimate the economic costs caused by EAB for the 10-yr period from 2010 to 2020 for scenarios of fewer EAB satellite populations than those found from 2005 to 2010 and slower expansion of satellite populations found in 2009. We measure the projected discounted cost of treatment, removal, and replacement of ash trees (Fraxinus spp.) growing in managed landscapes in U.S. communities. Estimated costs for the base scenario with the full complement of satellites in 2005-2010 and no program to mitigate spread is $12.5 billion. Fewer EAB satellites from 2005 to 2010 delay economic costs of $1.0 to 7.4 billion. Slower expansion of 2009 satellite populations delays economic costs of $0.1 to 0.7 billion. Satellite populations that are both distant from the core EAB infestation and close to large urban areas caused more economic costs in our simulations than did other satellites. Our estimates of delayed economic costs suggest that spending on activities that prevent establishment of new satellite EAB populations or slow expansion of existing populations can be cost-effective and that continued research on the cost and effectiveness of prevention and control activities is warranted.

  6. Insight of the fusion behavior of volcanic ash: Implications for Volcanic ash Hazards to Aircraft Safety (United States)

    Song, Wenjia; Hess, Kai-Uwe; Küppers, Ulrich; Scheu, Bettina; Cimarelli, Corrado; Lavallée, Yan; Sohyun, Park; Gattermann, Ulf; Müller, Dirk; Dingwell, Donald Bruce


    The interaction of volcanic ash with jet turbines during via ingestion of ash into engines operating at supra-volcanic temperatures is widely recognized as a potentially fatal hazard for jet aircraft. In the past 12 years, more than 60 modern jet airplanes, mostly jumbo jets, have been damaged by drifting clouds of volcanic ash that have contaminated air routes and airport facilities. Seven of these encounters are known to have caused in flight loss of engine power to jumbo jets carrying a total of more than 2000 passengers. The fusibility of volcanic ash is believed to impact strongly its deposition in the hotter parts of jet engines. Despite this, explicit investigation of ash sintering using standardized techniques is in its infancy. Volcanic ash may vary widely in its physical state and chemical composition between and even within explosive volcanic eruptions. Thus a comparative study of the fusibility of ash which involves a standard recognized techniques would be highly desirable. In this work, nine samples of fine ash, deposited from co-pyroclastic offrom nine different volcanoes which cover a broad range of chemical composition, were investigated. Eight of them were collected from 2001-2009 eruptions. Because of the currently elevated level of eruptive activity and its potential hazards to aircraft safety and the remaining one sample was collected from a 12,121 ± 114 yr B.P. eruption. We used the method of accessing the behavior of deposit-forming impurities in high temperature boiler plants on the basis of observations of the change in shape and size of a cylindrical coal ash to study the fusion phenomena as well as determine the volcanic ash melting behavior by defining four characteristic temperatures (shrinkage temperature, deformation temperature, hemispherical temperature, and flow temperature) by means of heating microscope instrument and different thermal analysis methods. Here, we find that there are similar sticking ability and flow behavior of

  7. Ash fusion temperatures and the transformations of coal ash particles to slag

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, S.K.; Wall, T.F.; Creelman, R.A.; Gupta, R.P. [University of Newcastle, Newcastle, NSW (Australia). CRC for Black Coal Utilisation


    A mechanistic study is detailed in which coal ash is heated with its shrinkage measured continuously up to a temperature of 1600{degree}C. The temperature corresponding to the rapid rate of shrinkage correspond to the formation of eutectics identified on phase diagrams. Samples were therefore heated to these temperatures, cooled rapidly and examined using a scanning electron microscope (SEM) to identify the associated chemical and physical changes. The progressive changes in the range of chemical composition (from SEM), the extent of undissolved ash particles and porosity were then quantified and related to homogenisation, viscosity and ash fusion mechanisms. Alternate ash fusion temperatures based on different levels of shrinkage have also been suggested to characterise the ash deposition tendency of the coals. 13 refs., 9 figs.

  8. International Database of Volcanic Ash Impacts (United States)

    Wallace, K.; Cameron, C.; Wilson, T. M.; Jenkins, S.; Brown, S.; Leonard, G.; Deligne, N.; Stewart, C.


    Volcanic ash creates extensive impacts to people and property, yet we lack a global ash impacts catalog to organize, distribute, and archive this important information. Critical impact information is often stored in ephemeral news articles or other isolated resources, which cannot be queried or located easily. A global ash impacts database would improve 1) warning messages, 2) public and lifeline emergency preparation, and 3) eruption response and recovery. Ashfall can have varying consequences, such as disabling critical lifeline infrastructure (e.g. electrical generation and transmission, water supplies, telecommunications, aircraft and airports) or merely creating limited and expensive inconvenience to local communities. Impacts to the aviation sector can be a far-reaching global issue. The international volcanic ash impacts community formed a committee to develop a database to catalog the impacts of volcanic ash. We identify three user populations for this database: 1) research teams, who would use the database to assist in systematic collection, recording, and storage of ash impact data, and to prioritize impact assessment trips and lab experiments 2) volcanic risk assessment scientists who rely on impact data for assessments (especially vulnerability/fragility assessments); a complete dataset would have utility for global, regional, national and local scale risk assessments, and 3) citizen science volcanic hazard reporting. Publication of an international ash impacts database will encourage standardization and development of best practices for collecting and reporting impact information. Data entered will be highly categorized, searchable, and open source. Systematic cataloging of impact data will allow users to query the data and extract valuable information to aid in the development of improved emergency preparedness, response and recovery measures.

  9. Chemical characterization of ash from gasification of alfalfa stems: Implications for ash management

    Energy Technology Data Exchange (ETDEWEB)

    Mozaffari, M.; Rosen, C.J.; Russelle, M.P.; Nater, E.A.


    Electricity generation from biomass is an attractive option from an environmental perspective. Pilot studies have indicated that alfalfa (Medicago sativa L.) stems are suitable feedstock for energy generation via gasification. Detailed information on chemical characteristics of the ash generated from gasification of alfalfa stem is required to develop environmentally and economically sound ash management strategies. Alfalfa fly and bottom ashes were characterized with respect to chemical properties that are important in developing ash management practices with emphasis on beneficial utilization as a soil amendment. Mean concentrations of total C, K, Ca, and Cl were 424, 120, 85, and 26 g kg{sup {minus}1}, respectively, in fly ash. In bottom ash, the mean concentrations of C, K, and Ca, were 63, 61, and 193 g kg{sup {minus}1}. Concentrations of total Pb, As, Cd, Co, and Se were below detection limits in both ash types. Naphthalene ranged from 6.2 to 74 mg kg{sup {minus}1}, but concentrations of many other polyaromatic hydrocarbons were low or below mg kg{sup {minus}1} detection limits. Available K and P in fly ash were 90 to 120 and 8 to 10 g kg{sup {minus}1}, respectively. Mean CaCO{sub 3} equivalent value of fly ash was 400 g kg{sup {minus}1}, its electrical conductivity (EC) and pH were 127 dS m{sup {minus}1} and 11.5, respectively. These results suggest that when managed properly, gasified alfalfa ash could potentially be utilized as a beneficial soil amendment with few potential environmental concerns.

  10. Ash melting behavior by Fourier transform infrared spectroscopy

    Institute of Scientific and Technical Information of China (English)

    LI Han-xu; QIU Xiao-sheng; TANG Yong-xin


    A Fourier Transform Infrared Spectroscopic (FTIR) method involving a Fe2O3 flux was used to learn how China's coal ash melts. The relationship between ash fusion temperature and chemical composition, as well as the effects of Fe2O3 flux on the ash fusion temperature were studied. The relationship between ash fusion temperature and chemical composition, mineralogical phases and functional groups was analyzed with the FTIR method. The results show that the ash fusion temperature is related to the location and transmittance of certain absorption peaks, which is of great significance for the study of ash behavior.

  11. Lipid peroxidation and oxidative status compared in workers at a bottom ash recovery plant and fly ash treatment plants. (United States)

    Liu, Hung-Hsin; Shih, Tung-Sheng; Chen, I-Ju; Chen, Hsiu-Ling


    Fly ash and ambient emissions of municipal solid waste incinerators contain polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polycyclic aromatic hydrocarbons (PAHs), other organic compounds, metals, and gases. Hazardous substances such as PCDD/Fs, mercury vapors and other silicates, and the components of bottom ash and fly ash elevate the oxidative damage. We compared oxidative damage in workers exposed to hazardous substances at a bottom ash recovery plant and 3 fly ash treatment plants in Taiwan by measuring their levels of plasma malondialdehyde (MDA) and urine 8-hydroxydeoxyguanosine (8-OH-dG). Significantly higher MDA levels were found in fly ash treatment plant workers (3.20 microM) than in bottom ash plant workers (0.58 microM). There was a significant association between MDA levels in workers and their working environment, especially in the fly ash treatment plants. Levels of 8-OH-dG varied more widely in bottom ash workers than in fly ash workers. The association between occupational exposure and 8-OH-dG levels may be affected by the life style of the workers. Because more dioxins and metals may leach from fly ash than from bottom ash, fly ash treatment plant workers should, as much as possible, avoid exposing themselves to fly ash.

  12. Effects of the addition of oil shale ash and coal ash on physic-chemical properties of CPJ45 cement

    Directory of Open Access Journals (Sweden)

    Nabih K.


    Full Text Available We focused our research on recycling industrial wastes, fly ash (F.A, bottom ash (B.A and oil shale ash (S.A in cement production. The study concerns physico-chemical characterization of these products and the influence of their addition on the mechanical proprieties of the CPJ45 cement. XRF allowed us to rank the three additives used according to their contents on major oxides. Coal ashes belong to the class F, and thus possess poozzolanic properties and oil shale ash belongs to the class C and possesses hydraulic and poozolanic properties. The crystalline phases constituting each ash were analysed by XRD. We observe in bottom ash the presence of quartz and mullite. The same crystals are found in fly ash with hematite and magnetite. Oil shale ash is composed of quartz, anhydrite, gehlenite, wollastonite and periclase. The microstructures of fly ash and bottom ash were studied using SEM. The bottom ash was composed respectively of fine particles that are generally irregularly shaped, their dimensions are between 5 and 28μm and of big particles(300 μm. The EDX analysis coupled with an electronic microscope provided some information about the major elements that constitute our samples. The dehydrations of anhydrous and three days hydrated cement were examined by DSC. For hydrated cements we noticed endothermic peaks related to the dehydration of CSH, CH and decomposition of carbonates. The study of the mechanical properties of CPJ45 cement by adding different proportions of fly ash, bottom ash and oil shale ash helped clarifying the percentage of ash that leaded to improve the 28 days mechanical strength. The results show that the cements studied have their maximum mechanical resistance with the addition at 7% of fly ash or 10% of oil shale ash.

  13. National volcanic ash operations plan for aviation (United States)

    ,; ,


    The National Aviation Weather Program Strategic Plan (1997) and the National Aviation Weather Initiatives (1999) both identified volcanic ash as a high-priority informational need to aviation services. The risk to aviation from airborne volcanic ash is known and includes degraded engine performance (including flameout), loss of visibility, failure of critical navigational and operational instruments, and, in the worse case, loss of life. The immediate costs for aircraft encountering a dense plume are potentially major—damages up to $80 million have occurred to a single aircraft. Aircraft encountering less dense volcanic ash clouds can incur longer-term costs due to increased maintenance of engines and external surfaces. The overall goal, as stated in the Initiatives, is to eliminate encounters with ash that could degrade the in-flight safety of aircrews and passengers and cause damage to the aircraft. This goal can be accomplished by improving the ability to detect, track, and forecast hazardous ash clouds and to provide adequate warnings to the aviation community on the present and future location of the cloud. To reach this goal, the National Aviation Weather Program established three objectives: (1) prevention of accidental encounters with hazardous clouds; (2) reduction of air traffic delays, diversions, or evasive actions when hazardous clouds are present; and (3) the development of a single, worldwide standard for exchange of information on airborne hazardous materials. To that end, over the last several years, based on numerous documents (including an OFCMsponsored comprehensive study on aviation training and an update of Aviation Weather Programs/Projects), user forums, and two International Conferences on Volcanic Ash and Aviation Safety (1992 and 2004), the Working Group for Volcanic Ash (WG/VA), under the OFCM-sponsored Committee for Aviation Services and Research, developed the National Volcanic Ash Operations Plan for Aviation and Support of the

  14. Characteristics of MSWI fly ash during vitrification

    Institute of Scientific and Technical Information of China (English)

    TIAN Shu-lei; WANG Qi; WANG Qun-hui; MA Hong-zhi


    The vitrification characteristics of municipal solid waste incinerator (MSWI) fly ash were investigated. Effects of temperature on the binding efficiency of heavy metals, the change of chemical compositions and the weight loss of fly ash in the range of 800 - 1350 ℃ were studied. Toxicity Characteristic Leaching Procedure (TCLP) of the United States was used to analyze the leaching characteristics of heavy metals in fly ash and molten slag. Results indicate that chemical compositions, the weight loss of fly ash and the binding efficiency of heavy metals in fly ash have a tremendous change in the range of 1150 - 1260 ℃. The percentage of CaO, SiO2and AI203 increases with the increasing temperature, whereas it is contrary for SO3 , K2O, Na20 and CI; especially when the temperature is 1260 ℃, the percentage of these four elements decreases sharply from 43.72%to 0. 71%. The weight loss occurs obviously in the range of 1150 - 1260 ℃. Heavy metals of Pb and Cd are almost vaporized above 1000 ℃. Cr is not volatile and its binding efficiency can reach 100% below 1000 ℃. Resuits of TCLP indicate that the heavy metal content of molten slag is beyond stipulated limit values.

  15. Thermal treatment of ashes[Fly Ash from Municipal Waste Incineration]; Termisk rening av askor

    Energy Technology Data Exchange (ETDEWEB)

    Wikman, Karin; Berg, Magnus; Bjurstroem, Henrik [AaF-Energi och Miljoe AB, Stockholm (Sweden); Nordin, Anders [Umeaa Univ. (Sweden). Dept. of Applied Physics and Electronics


    In this project descriptions of different processes for thermal treatment of ashes have been compiled. A technical and economic evaluation of the processes has been done to identify possibilities and problems. The focus in the project lays on treatment of fly ash from municipal waste incineration but the processes can also be used to treat other ashes. When the ash is heated in the thermal treatment reactor, with or without additives, the material is sintered or vitrified and at the same time volatile substances (Zn, Pb, Cd, Hg etc.) are separated. In general the separation is more effective in processes with reducing conditions compared to oxidizing conditions. Oxidizing processes have both worse separation capacity and require more energy. The oxidizing processes are mainly used to stabilize the ash through vitrification and they are in some cases developed for management of municipal sewage sludge and bottom ash. However, these processes are often not as complex as for example an electric arc melting furnace with reducing conditions. The research today aim to develop more effective electrical melting systems with reducing conditions such as plasma melting furnaces, electric resistance melting furnaces and low frequency induction furnaces. A central question in the evaluation of different thermal treatment processes for ash is how the residues from the treatment can be used. It is not certain that the vitrified material is stable enough to get a high economic value, but it can probably be used as construction material. How the remaining metals in the ash are bound is very important in a long-time perspective. Further studies with leaching tests are necessary to clarify this issue. The heavy metal concentrate from the processes contains impurities, such as chlorine, which makes it unprofitable to obtain the metals. Instead the heavy metal concentrate has to be land filled. However, the amount of material for land filling will be much smaller if only the heavy

  16. Regular Recycling of Wood Ash to Prevent Waste Production (RecAsh). Technical Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Lars E-mail:


    At present, the extraction of harvest residues is predicted to increase in Sweden and Finland. As an effect of the intensified harvesting, the export of nutrients and acid buffering substances from the growth site is also increased. Wood ash could be used to compensate forest soils for such losses. Most wood fuel ash is today often deposited in landfills. If the wood ash is recycled, wood energy is produced without any significant waste production. Ash recycling would therefore contribute to decreasing the production of waste, and to maintaining the chemical quality of forest waters and biological productivity of forest soils in the long term. The project has developed, analysed and demonstrated two regular ash-recycling systems. It has also distributed knowledge gathered about motives for ash recycling as well as technical and administrative solutions through a range of media (handbooks, workshops, field demonstrations, reports, web page and information videos). Hopefully, the project will contribute to decreasing waste problems related to bio-energy production in the EU at large. The project has been organised as a separate structure at the beneficiary and divided in four geographically defined subprojects, one in Finland and three in Sweden (Central Sweden, Northern Sweden, and South-western Sweden). The work in each subproject has been lead by a subproject leader. Each subproject has organised a regional reference group. A project steering committee has been established consisting of senior officials from all concerned partners. The project had nine main tasks with the following main expected deliverables and output: 1. Development of two complete full-scale ash-recycling systems; 2. Production of handbooks of the ash recycling system; 3. Ash classification study to support national actions for recommendations; 4. Organise regional demonstrations of various technical options for ash treatment and spreading; 5. Organise national seminars and demonstrations of

  17. 花曲柳茎芽增殖和植株再生%Shoot multiplication and plant regeneration in Fraxinus rhynchophylla Hance

    Institute of Scientific and Technical Information of China (English)

    单琳; 杨玲; 沈海龙


    In order to establish a high frequency system of tissue culture and plant regeneration in Fraxinus rhynchophylla, taking adventitious stem segments with buds induced from dormant bud and seedling in F. Rhynchophylla as explants, the optimal nutrient media and different combinations of plant growth regulators were selected out, multiple shoots were induced and regenerated plants were obtained. The results showed that April was superior to other periods for collecting dormant buds. The proliferation coefficient of shoots from dormant bud was 2.32 in improved B5 medium supplemented with 4 mg · L-1 BA and 0.10 mg · L-1 IBA, and the proliferation coefficient of shoots from aseptic seedling in the same medium was over 3.0, so the medium was optimal. Rooting rate of shoot could reach 95% in 1/2MS medium supplemented with 0.5 mg · L-1' NAA, so it was optimal medium for rooting. Survival rate of the established plantlets could reach 92% after transferring to growing medium with composition of 50% peat moss, 40% vermiculite and 10% polite. Shoot could root after quickly dipping in 200 g · L"' IBA, and survival rate could reach 60% in the same medium.%为建立高效的花曲柳组培快繁体系,以花曲柳休眠芽萌发获得的带芽茎段和成熟种子无菌萌发获得的带芽茎段为外植体,通过基本培养基和不同植物生长调节剂组合的筛选,诱导出丛生芽,获得了再生植株.结果表明:花曲柳休眠芽采集的最适时期是4月中旬,适合的基本培养基为改良的B5培养基,在改良的B5培养基上添加BA 4.0 mg·L-1和IBA 0.10 mg·L-1,茎芽可以实现增殖,增殖系数可达2.3;在相同培养基上,无菌苗茎段的茎芽增殖系数可达3.0以上;最适的试管内生根培养基为添加NAA 0.5 mg·L-1的1/2MS培养基,茎芽的生根率可达95%,再生植株在草炭土、蛭石和珍珠岩体积比5:4:1的栽培基质中移栽成活率为92%.茎芽速蘸IBA 200 g·L-1后在上述栽培基质中试管

  18. Correlation between the critical viscosity and ash fusion temperatures of coal gasifier ashes

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, Peter Y. [National Energy Technology Lab. (NETL), Albany, OR (United States); Kwong, Kyei-Sing [National Energy Technology Lab. (NETL), Albany, OR (United States); Bennett, James [National Energy Technology Lab. (NETL), Albany, OR (United States)


    Coal gasification yields synthesis gas, an important intermediate in chemical manufacturing. It is also vital to the production of liquid fuels through the Fischer-Tropsch process and electricity in Integrated Gasification Combined Cycle power generation. Minerals naturally present in coal become molten in entrained-flow slagging gasifiers. Molten coal ash slag penetrates and dissolves refractory bricks, leading to costly plant shutdowns. The extent of coal ash slag penetration and refractory brick dissolution depends on the slag viscosity, the gasification temperature, and the composition of slag and bricks. Here, we measured the viscosity of several synthetic coal ash slags with a high-temperature rotary viscometer and their ash fusion temperatures through optical image analysis. We made all measurements in a carbon monoxide-carbon dioxide reducing atmosphere that approximates coal gasification conditions. Empirical correlation models based on ash fusion temperatures were used to calculate critical viscosity temperatures based on the coal ash compositions. These values were then compared with those obtained from thermodynamic phase-transition models. Finally, an understanding of slag viscosity as a function of ash composition is important to reducing refractory wear in slagging coal gasifiers, which would help to reduce the cost and environmental impact of coal for chemical and electricity production.

  19. Laboratory study of volcanic ash electrification (United States)

    Alois, Stefano; Merrison, Jonathan


    Electrostatic forces play an important role in the dynamics of volcanic plumes, for example in ash dispersion and aggregation phenomena. Field measurements of ash electrification are often technically challenging due to poor access and there lacks an accepted physical theory to describe the electrical charge exchange which occurs during particle contact. The goal of the study is to investigate single particle electrification under controlled conditions using advanced laboratory facilities. A novel technique is presented, based on the use of a laser based velocimeter. Here an electric field is applied and the field-induced drift velocity of (micron-sized) ash grains is measured as well as the particles fall velocity. This allows the simultaneous determination of a suspended grains size and electrical charge. The experiments are performed in a unique environmental wind tunnel facility under controlled low-pressure conditions. Preliminary results of particle electrification will be presented.

  20. Assessing fly ash treatment: Remediation and stabilization of heavy metals

    DEFF Research Database (Denmark)

    Lima, A.T.; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.


    Fly ashes from Municipal Solid Waste (MSW), straw (ST) and co-combustion of wood (CW) are here analyzed with the intent of reusing them. Two techniques are assessed, a remediation technique and a solidification/stabilization one. The removal of heavy metals from fly ashes through...... the electrodialytic process (EDR) has been tried out before. The goal of removing heavy metals has always been the reuse of fly ash, for instance in agricultural fields (BEK). The best removal rates are here summarized and some new results have been added. MSW fly ashes are still too hazardous after treatment to even...... consider application to the soil. ST ash is the only residue that gets concentrations low enough to be reused, but its fertilizing value might be questioned. An alternative reuse for the three ashes is here preliminary tested, the combination of fly ash with mortar. Fly ashes have been substituted...

  1. Eco-friendly fly ash utilization: potential for land application

    Energy Technology Data Exchange (ETDEWEB)

    Malik, A.; Thapliyal, A. [Indian Institute of Technology Delhi, New Delhi (India)


    The increase in demand for power in domestic, agricultural, and industrial sectors has increased the pressure on coal combustion and aggravated the problem of fly ash generation/disposal. Consequently the research targeting effective utilization of fly ash has also gained momentum. Fly ash has proved to be an economical substitute for expensive adsorbents as well as a suitable raw material for brick manufacturing, zeolite synthesis, etc. Fly ash is a reservoir of essential minerals but is deficient in nitrogen and phosphorus. By amending fly ash with soil and/or various organic materials (sewage sludge, bioprocess materials) as well as microbial inoculants like mycorrhizae, enhanced plant growth can be realized. Based on the sound results of large scale studies, fly ash utilization has grown into prominent discipline supported by various internationally renowned organizations. This paper reviews attempts directed toward various utilization of fly ash, with an emphasis on land application of organic/microbial inoculants amended fly ash.

  2. Fusion characteristics of volcanic ash relevant to aviation hazards (United States)

    Song, Wenjia; Hess, Kai-Uwe; Damby, David E.; Wadsworth, Fabian B.; Lavallée, Yan; Cimarelli, Corrado; Dingwell, Donald B.


    The fusion dynamics of volcanic ash strongly impacts deposition in hot parts of jet engines. In this study, we investigate the sintering behavior of volcanic ash using natural ash of intermediate composition, erupted in 2012 at Santiaguito Volcano, Guatemala. A material science procedure was followed in which we monitored the geometrical evolution of cylindrical-shaped volcanic ash compact upon heating from 50 to 1400°C in a heating microscope. Combined morphological, mineralogical, and rheological analyses helped define the evolution of volcanic ash during fusion and sintering and constrain their sticking potential as well as their ability to flow at characteristic temperatures. For the ash investigated, 1240°C marks the onset of adhesion and flowability. The much higher fusibility of ash compared to that of typical test sands demonstrates for the need of a more extensive fusion characterization of volcanic ash in order to mitigate the risk posed on jet engine operation.

  3. Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer. (United States)

    Chindaprasirt, Prinya; Rattanasak, Ubolluk


    In this paper, synthesis of geopolymer from fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash was studied in order to effectively utilize both ashes. FBC-fly ash and bottom ash were inter-ground to three different finenesses. The ashes were mixed with as-received PCC-fly ash in various proportions and used as source material for synthesis of geopolymer. Sodium silicate (Na(2)SiO(3)) and 10M sodium hydroxide (NaOH) solutions at mass ratio of Na(2)SiO(3)/NaOH of 1.5 and curing temperature of 65 degrees C for 48h were used for making geopolymer. X-ray diffraction (XRD), scanning electron microscopy (SEM), degree of reaction, and thermal gravimetric analysis (TGA) were performed on the geopolymer pastes. Compressive strength was also tested on geopolymer mortars. The results show that high strength geopolymer mortars of 35.0-44.0MPa can be produced using mixture of ground FBC ash and as-received PCC-fly ash. Fine FBC ash is more reactive and results in higher degree of reaction and higher strength geopolymer as compared to the use of coarser FBC ash. Grinding increases reactivity of ash by means of increasing surface area and the amount of reactive phase of the ash. In addition, the packing effect due to fine particles also contributed to increase in strength of geopolymers.

  4. The primary research of growth condition of Fraxinus mandshurica plantation in different site condition%不同立地条件下水曲柳人工林生长状况的初步研究

    Institute of Scientific and Technical Information of China (English)



    不同立地条件的水曲柳人工幼龄林生长指标的调查结果表明:缓坡造林,8 a生胸径最大值为6.0 cm,树高最大值为6.5 m;轻微水湿地造林,经2次施肥后,12 a生时平均胸径、平均枝下高生长量较缓坡造林的8 a生水曲柳仅具有微弱生长优势,平均树高、平均冠幅和平均枝下高低于8 a生缓坡水曲柳幼龄林;农耕地10 a生水曲柳人工幼龄林平均树高为4.50 m,为其他立地的150%,最大值为6.8 m,胸径最大值为7.3 cm,单位面积立木蓄积为其他立地的158.3%。水曲柳造林后第四年开始,胸径、树高、材积生长较快,胸径连年生长量由0.65 cm增至0.80 cm以上;树高生长量在4~6 a增长最大,连年生长量达1.00 m,平均生长量也持续在0.60 m以上;材积平均生长量、连年生长量自第四年开始,增幅较大,第六年连年生长量为第五年的1.92倍。%The investigation result of Fraxinus mandshurica young growth plantation growth index of different site condition showed that the diameter at breast height and tree height maximum of 8 years was 6.0cm and 6.5m with gentle slope affor-estation.The average diameter at breast height and height under branch growth amount of 12 years after twice applying fer-tilizer with slight water wetland afforestation had little growth advantage compared with 8 years Fraxinus mandshurica of gen-tle slope afforestation.The average tree height, crown breadth and height under branch was lower than the Fraxinus mand-shurica young growth of 8 years of gentle slope.The young growth plantation of 10 years Fraxinus mandshurica of farm land whose average tree height was 4.50 m was the 150%of other site's.The maximum value was 6.8m.The maximum value of diameter at breast height was 7.3 cm.The unit area timber accumulation was 158.3%of other site's.The growth of diame-ter at breast height, tree height and volume of wood was fast at the forth

  5. Changeing of fly ash leachability after grinding (United States)

    Lakatos, J.; Szabo, R.; Racz, A.; Banhidi, O.; Mucsi, G.


    Effect of grinding on the reactivity of fly ash used for geopolymer production was tested. Extraction technique using different alkaline and acidic solutions were used for detect the change of the solubility of elements due to the physical and mechano-chemical transformation of minerals in function of grinding time. Both the extraction with alkaline and acidic solution have detected improvement in solubility in function of grinding time. The enhancement in alkaline solution was approx. 100% in case of Si and Al. The acidic medium able to dissolve the fly ash higher manner than the alkaline, therefore the effect of grinding was found less pronounced.

  6. Physical cleaning of high carbon fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Gray, McMahan L.; Champagne, Kenneth J.; Soong, Yee; Killmeyer, Richard P. [National Energy Technology Laboratory, US Department of Energy, P.O. Box 10940, Cochran Mills Roads, 15236 Pittsburgh, PA (United States); Maroto-Valer, M. Mercedes; Andresen, John M. [The Energy Institute, The Pennsylvania State University, 405 Academic Activities Building, 16802-2308 University Park, PA (United States); Ciocco, Michael V.; Zandhuis, Paul H. [Parson Project Services Inc, National Energy Technology Laboratory, P.O. Box 618, 15129 Library, Pittsburgh, PA (United States)


    An industrial fly ash sample was cleaned by three different processes, which were triboelectrostatic separation, ultrasonic column agglomeration, and column flotation. The unburned carbon concentrates were collected at purities ranging up to 62% at recoveries of 62%. In addition, optical microscopy studies were conducted on the final carbon concentrates to determine the carbon forms (inertinite, isotropic coke and anisotropic coke) collected from these various physical-cleaning processes. The effects of the various cleaning processes on the production of different carbon forms from high carbon fly ashes will be discussed.

  7. Cleaner phosphogypsum, coal combustion ashes and waste incineration ashes for application in building materials: A review

    Energy Technology Data Exchange (ETDEWEB)

    L. Reijnders [University of Amsterdam, Amsterdam (Netherlands)


    Application of phosphogypsum, coal combustion ashes and waste incineration ashes in building materials has been limited by the presence of minor components that are hazardous, such as radioactive substances, chlorinated dioxins and heavy metals, or have a negative impact on product quality or production economics, such as phosphate, fluoride, carbon and chloride. Source reduction, destruction of persistent organics and separation techniques may reduce the concentrations of such components. With a few exceptions, separation techniques currently lead to significantly higher (private) costs. Higher waste disposal costs, tighter regulations and higher prices for competing virgin minerals could make the use of the purified phosphogypsum and ashes in building materials more attractive.

  8. Utilization options for fly ash, bottom ash, and slag in Eastern Europe

    Energy Technology Data Exchange (ETDEWEB)

    Manz, O.E.


    Since 1967, at least six ash utilization symposiums have been held in the United States, with papers presented by several European authors on the utilization of coal by-products in Eastern Europe. There is currently over 80,000 megawatts of installed coal-fired capacity available in that region. Unfortunately, of the 117,778,000 tonnes of fly ash, bottom ash, and slag produced in Eastern Europe in 1989, only 13% was utilized. This paper outlines the research and levels and kinds of coal by-product utilization taking place in Eastern Europe since the late 1960s.

  9. Ash fusion temperatures and the transformations of coal ash particles to slag

    Energy Technology Data Exchange (ETDEWEB)

    Wall, T.F.; Creelman, R.A.; Gupta, R.; Gupta, S. [Univ. of Newcastle (Australia)


    A mechanistic study is detailed in which coal ash is heated with the shrinkage and electrical resistance measured continuously up to a temperature of 1600{degrees}C. The temperatures corresponding to rapid rates of shrinkage are shown to correspond to the formation of eutectics identified on phase diagrams. Samples where therefore heated to these temperatures, cooled rapidly and examined with an SEM to identify the associated chemical and physical changes. The progressive changes in the range of chemical analysis (from SEM), the extent of undissolved ash particles and porosity are then quantified and related to the shrinkage events and standard ash fusion temperatures.

  10. Ash fusion temperatures and the transformations of coal ash particles to slag

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, S.; Wall, T.F.; Creelman, R.A.; Gupta, R. [Univ. of Newcastle, Callaghan (Australia)


    A mechanistic study is detailed in which coal ash is heated with its shrinkage measured continuously up to a temperature of 1600{degrees}C. The temperatures corresponding to the rapid rate of shrinkage are shown to correspond to the formation of eutectics identified on phase diagrams. Samples were therefore heated to these temperatures, cooled rapidly and examined with an SEM to identify the associated chemical and physical changes. The progressive changes in the range of chemical analysis (from SEM), the extent of undissolved ash particles and porosity were then quantified and related to homogenization, viscosity and ash fusion mechanisms.

  11. Associative properties of {sup 137}Cs in biofuel ashes

    Energy Technology Data Exchange (ETDEWEB)

    Ravila, A.; Holm, E. [Lund Univ. (Sweden). Dept. of Radiation Physics


    The present study aims to reveal how radiocesium is associated to the ash particles derived from biofuel combustion. A sequential extraction procedure was carried out for the characterisation of radiocesium speciation in ash generated by different fuels and burner types. The ash types considered were fly ash and bottom ash collected from Swedish district heating plants using bark wood or peat as fuel. A fraction of the radiocesium in biofuel ash can easily become solubilised and mobilised by water and also, a significant fraction of the radionuclides can be bound to the ash particles in cation-exchangeable forms. Therefore, at using the ash derived from biofuels to recycle mineral nutrients for forestry or short rotation coppicing, radiocesium solubilised and leached from the ash by rains has a potential to rather quickly enter the rooting zone of forest vegetation or energy crops. On the other hand, radiocesium strongly bound to the ash will migrate slowly into the soil column with the successive accumulation of litter and in the process act to maintain the external dose rate at an elevated level for a long time. The results of the sequential extraction procedure and activity determination of the different extracted fractions implies that the bioavailable fraction of radiocesium in ash from bark, wood or peat is in the range between 20-85% of the total ash contents. Peat ash collected from a powder burner strongly retained a large fraction (70-90%) of its radiocesium content while the peat ash from a continuos fluidized bed type burner retained nearly 100% of the radiocesium in the bottom ash and only about 15% in the fly ash.

  12. Relationships between the emergence and oviposition of ectoparasitoid Spathius agrili Vang and its host emerald ash borer, Agrilus planipennis Fairmaire

    Institute of Scientific and Technical Information of China (English)

    WANG Xiaoyi; YANG Zhongqi; LIU Guijun; LIU Enshan


    Emerald ash borer(EAB),Agrilus planipennisFairmaire(Coleoptera: Buprestidae),(=A.marcopoli Obenberger),is an important bark beetle attacking ash trees (Fraxinus spp.).It is very difficult to detect and control because of its highly concealed life history.This pest mainly distributed in partial Asian countries(China,Japan,Korea,Mongolia)and Far East Russia,while in China it presented in Heilongjiang,Jilin,Liaoning,Shandong,Inner Mongolia,Hebei,Taiwan Provinces and Tianjin City,etc.The important timber species F.mandshurica and gardening tree F.velutina were damaged severely in northern China.Spathius agrili Yang(Hymenoptera:Braconidae)is an important ectoparasitic wasp of the EAB larvae.This parasitoid has the potential to use as an excellent biological control agent for suppressing populations of EAB.The differences of emergence date between overwintered S.agrili and its host,parasitism rates at different periods,relations between parasitism rates and host densities,and relationships between ovipositions of braconid wasp and body sizes of host larvae were studied using methods of regular surveys in forests and observations in laboratory.Results revealed that the emergence of S.agrili was more than one month later than that of its host.It suggests good synchrony between parasitoid emergence and host availability.The overwintered S.agrili emerged from mid June to mid August with the peak in July in 2003,and it lasted from late May till late July with the peak during late June to early July in 2004.While the EAB emergence period ranged from mid May to late May in 2003,it ranged from mid April to mid May in 2004(in laboratory).The emergence date of parasitoid asynchronously inosculated with the optimum developmental instars of the earliest host larvae,which was the result of a long-term co-evolution between the two species.It was also suggested that the parasitoid S.agrili could be a specialized natural enemy for EAB.The natural parasitism rates on the whole gradually

  13. Characterization of fly ash from bio and municipal waste

    DEFF Research Database (Denmark)

    Lima, Ana T.; Ottosen, Lisbeth M.; Pedersen, Anne Juul


    the co-combustion of wood and oil. The focus is laid on differences in ash characteristics and on the mobility of Cd and Cr. These two heavy metals are chosen because Cd is the problematic heavy metal in bio ashes and Cr is problematic in many ash stabilization methods (in the Cr(VI) state). Based...

  14. Ash Deposition Trials at Three Power Stations in Denmark

    DEFF Research Database (Denmark)

    Laursen, Karin; Frandsen, Flemming; Larsen, Ole Hede


    the probe temperature did influence the composition of deposits for coals with medium ash deposition propensities. These results may indicate that coals with medium to high ash deposition propensities in existing boilers may cause increasing ash deposit formation in future boilers with higher steam...

  15. The Rheology of Vegetative Ash-laden Debris Flows (United States)

    Burns, K. A.; Gabet, E.


    There is mounting observational evidence that vegetative ash created in a forest fire may play a major role in reducing infiltration and leads to the generation of debris flows on these burned hillslopes. A viscometer was used to measure the viscosity of ash slurries of varying concentrations, as well as slurries containing both fine- grained clastic sediment (sand and silt sized) and vegetative ash at varying concentrations. Initial results from these experiments indicate that increasing the concentration of ash increases effective viscosity of the slurry. Increasing the ash concentration by 5% increases the effective viscosity of the slurry by 10-50% over a range of shear rates. Also, ash-only slurries appear to shear thin with increasing shear rate at all concentrations. For example, with a 60% ash concentration, increasing the shear rate from 5/s to 40/s reduces the effective viscosity by 90%. For the mixed ash and fine-grained sediment slurries, increasing the percentage of ash relative to the percentage of clastic sediment dramatically increases the viscosity of the slurry even though the ash and finest-grained sediment are approximately the same size. A 50% concentration slurry containing only silt-sized clastic particles has a 40-70% lower effective viscosity than a slurry of the same concentration containing only ash particles. Therefore, the ash particles behave differently than clastic sediment particles.

  16. Oil ash corrosion; A review of utility boiler experience

    Energy Technology Data Exchange (ETDEWEB)

    Paul, L.D. (Babcock and Wilcox Co., Alliance, OH (United States)); Seeley, R.R. (Babcock and Wilcox Canada Ltd., Cambridge, ON (Canada))


    In this paper a review of experience with oil ash corrosion is presented along with current design practices used to avoid excessive tube wastage. Factors influencing oil ash corrosion include fuel chemistry, boiler operation, and boiler design. These factors are interdependent and determine the corrosion behavior in utility boilers. Oil ash corrosion occurs when vanadium-containing ash deposits on boiler tube surfaces become molten. These molten ash deposits dissolve protective oxides and scales causing accelerated tube wastage. Vanadium is the major fuel constituent responsible for oil ash corrosion. Vanadium reacts with sodium, sulfur, and chlorine during combustion to produce lower melting temperature ash compositions, which accelerate tube wastage. Limiting tube metal temperatures will prevent ash deposits from becoming molten, thereby avoiding the onset of oil ash corrosion. Tube metal temperatures are limited by the use of a parallel stream flow and by limiting steam outlet temperatures. Operating a boiler with low excess air has helped avoid oil ash corrosion by altering the corrosive combustion products. Air mixing and distribution are essential to the success of this palliative action. High chromium alloys and coatings form more stable protective scaled on tubing surfaces, which result in lower oil ash corrosion rates. However, there is not material totally resistant to oil ash corrosion.

  17. Observation of Eyjafjallajökull volcano ash over Poland (United States)

    Zielinski, T.; Petelski, T.; Makuch, P.; Kowalczyk, J.; Rozwadowska, A.; Drozdowska, V.; Markowicz, K.; Malinowski, S.; Kardas, A.; Posyniak, M.; Jagodnicka, A. K.; Stacewicz, T.; Piskozub, J.


    The plume of Eyjafjallajökull volcano ash has been identified over Poland using three instruments (two lidars and a ceilometer) stationed in two locations: Sopot in northern Poland and Warsaw in central-eastern Poland. The observations made it possible to establish the base of the ash layer. However ash concentration could not be determined.

  18. Economic analysis of emerald ash borer (Coleoptera: Buprestidae) management options. (United States)

    Vannatta, A R; Hauer, R H; Schuettpelz, N M


    Emerald ash borer, Agrilus planipennis (Fairmaire) (Coleoptera: Buprestidae), plays a significant role in the health and extent of management of native North American ash species in urban forests. An economic analysis of management options was performed to aid decision makers in preparing for likely future infestations. Separate ash tree population valuations were derived from the i-Tree Streets program and the Council of Tree and Landscape Appraisers (CTLA) methodology. A relative economic analysis was used to compare a control option (do-nothing approach, only removing ash trees as they die) to three distinct management options: 1) preemptive removal of all ash trees over a 5 yr period, 2) preemptive removal of all ash trees and replacement with comparable nonash trees, or 3) treating the entire population of ash trees with insecticides to minimize mortality. For each valuation and management option, an annual analysis was performed for both the remaining ash tree population and those lost to emerald ash borer. Retention of ash trees using insecticide treatments typically retained greater urban forest value, followed by doing nothing (control), which was better than preemptive removal and replacement. Preemptive removal without tree replacement, which was the least expensive management option, also provided the lowest net urban forest value over the 20-yr simulation. A "no emerald ash borer" scenario was modeled to further serve as a benchmark for each management option and provide a level of economic justification for regulatory programs aimed at slowing the movement of emerald ash borer.

  19. 77 FR 55895 - Permanent Closure of Cincinnati Blue Ash Airport (United States)


    ... Federal Aviation Administration Permanent Closure of Cincinnati Blue Ash Airport AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of permanent closure of Cincinnati Blue Ash Airport (ISZ). SUMMARY: The... Cincinnati advising that on August 29, 2012, it was permanently closing Cincinnati Blue Ash Airport...

  20. Evaluation of Pollutant Leaching Potential of Coal Ashes for Recycling (United States)

    Park, D.; Woo, N. C.; Kim, H.; Yoon, H.; Chung, D.


    By 2009, coal ashes produced from coal-based power plants in Korea have been reused as cement supplement materials; however, the rest is mostly disposed in landfills inside the plant properties. Continuous production of coal ashes and limited landfill sites require more recycles of coal ashes as base materials, specifically in constructions of roads and of huge industrial complex. Previous researches showed that coal ashes could contain various metals such as arsenic(As), chromium(Cr), lead(Pb), nickel(Ni), selenium(Se), etc. In this study, we collected four types of bottom ashes and two of fly ashes from four coal-based power plants. These ash samples were tested with distilled water through the column leaching process in oxidized conditions. The column test results were compared with those of total digestion, sequential extraction processes and TCLP. Concentrations of metals in outflows from columns are generally greater in fly ashes than in bottom ashes, specifically for As, Se, B, Sr and SO4. Only one fly ash (J2-F) shows high concentrations of arsenic and selenium in leachate. Sequential extraction results indicate that these metals are in readily soluble forms, such as adsorbed, carbonated, and reducible forms. Results of TCLP analysis indicate no potential contaminants leached from the ashes. In conclusion, recycling of coal combustion ashes could be encouraged with proper tests such as sequential and leaching experiments.

  1. Optimizing and Characterizing Geopolymers from Ternary Blend of Philippine Coal Fly Ash, Coal Bottom Ash and Rice Hull Ash

    Directory of Open Access Journals (Sweden)

    Martin Ernesto Kalaw


    Full Text Available Geopolymers are inorganic polymers formed from the alkaline activation of amorphous alumino-silicate materials resulting in a three-dimensional polymeric network. As a class of materials, it is seen to have the potential of replacing ordinary Portland cement (OPC, which for more than a hundred years has been the binder of choice for structural and building applications. Geopolymers have emerged as a sustainable option vis-à-vis OPC for three reasons: (1 their technical properties are comparable if not better; (2 they can be produced from industrial wastes; and (3 within reasonable constraints, their production requires less energy and emits significantly less CO2. In the Philippines, the use of coal ash, as the alumina- and silica- rich geopolymer precursor, is being considered as one of the options for sustainable management of coal ash generation from coal-fired power plants. However, most geopolymer mixes (and the prevalent blended OPC use only coal fly ash. The coal bottom ash, having very few applications, remains relegated to dumpsites. Rice hull ash, from biomass-fired plants, is another silica-rich geopolymer precursor material from another significantly produced waste in the country with only minimal utilization. In this study, geopolymer samples were formed from the mixture of coal ash, using both coal fly ash (CFA and coal bottom ash (CBA, and rice hull ash (RHA. The raw materials used for the geopolymerization process were characterized using X-ray fluorescence spectroscopy (XRF for elemental and X-ray diffraction (XRD for mineralogical composition. The raw materials’ thermal stability and loss on ignition (LOI were determined using thermogravimetric analysis (TGA and reactivity via dissolution tests and inductively-coupled plasma mass spectrometry (ICP analysis. The mechanical, thermal and microstructural properties of the geopolymers formed were analyzed using compression tests, Fourier transform infra-red spectroscopy (FTIR

  2. Mössbauer characterization of feed coal, ash and fly ash from a thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Reyes Caballero, F.; Martínez Ovalle, S. A., E-mail:; Moreno Gutiérrez, M. [Universidad Pedagógica y Tecnológica de Colombia, UPTC, Grupo de Física Nuclear Aplicada y Simulación (Colombia)


    The aim of this work was apply {sup 57}Fe Transmission Mössbauer Spectroscopy at room temperature in order to study the occurrence of iron-containing mineral phases in: 1) feed coal; 2) coal ash, obtained in different stages of the ASTM D3174 standard method; and 3) fly ash, produced when coal is burned in the TERMOPAIPA IV thermal power plant localized in Boyacá, Colombia. According to obtained results, we can conclude the occurrence of pyrite and jarosite in the feed coal; Fe{sup 2+} and Fe{sup 3+} crystalline paramagnetic phases, superparamagnetic hematite and hematite in coal ash; Fe{sup 2+} and Fe{sup 3+} noncrystalline and crystalline phases, magnetite and hematite in fly ash. Precisely, for a basic understanding, this work discusses some the possible transformations that take place during coal combustion.

  3. Root secretion stimulating ash growth in larch-ash mixed forest

    Institute of Scientific and Technical Information of China (English)

    吴俊民; 刘广平; 王晓水; 吴保国


    Allelopathic effect of larch (Larix gmelini ) on the ash growth (Fraximus mandshurica) was studied in artificial cultivation tests. The results revealed that the larch root secretion obviously stimulated the ash growth. In order to determine the main stimulation allelochemicals, the chemical composition was analyzed. By contrasting the contents of carbohydrate and aminoacid in root secretion of larch and ash, it was concluded that the carbohydrate and aminoacid were not important stimulation allelochemicals. The organic acid and other components in root secretion of larch and ash were analyzed by GC and GC-MS analysis. The sand culture tests were carried out with selected model compounds. The results showed that benzeneacetic acid, benzenepropionic acid and phenolic acids in root secretion of larch were the main stimulation allelochemicals.

  4. Lixiviation of fly ash. Uitloging van vliegas

    Energy Technology Data Exchange (ETDEWEB)

    Verhagen, L.


    The lixiviation of a number of elements (Na, K, Ca, Mg, V, As, Sb and Hg) from different fly ash products (fired and cement bounded products) is investigated. A theoretical description of diffusion from a fly ash product is given as well as a standard test to determine the lixiviation rate. Lixiviation can be interpreted as a diffusion process. Diffusion of an element X from a fly ash product can be described with the following parameters: the effective diffusion coefficient, the fraction that is available for lixiviation and the tortuosity of the product. The physical meaning of the determined tortuosity is not clear. The behavior of tracers in the product is compared with the behavior of the corresponding element. Often this behavior deviates, sometimes even considerably. From a comparison of fly ash products it appears that cement bounded products are better able to combine with arsenicum and antimony than fired products. None of the investigated products caused concentrations of micro-elements way above the stated norm. Improvement as for lixiviation behavior of the products seems to be possible, in particular for bricks. 8 refs., 17 tabs., 26 figs.

  5. Heavy metals in MSW incineration fly ashes

    DEFF Research Database (Denmark)

    Ferreira, Celia; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.


    Incineration is a common solution for dealing with the increasing amount of municipal solid waste (MSW). During the process, the heavy metals initially present in the waste go through several transformations, ending up in combustion products, such as fly ash. This article deals with some issues r...

  6. Phosphorus recovery from sewage sludge char ash

    NARCIS (Netherlands)

    Atienza-Martinez, M.; Gea, G.; Arauzo, J.; Kersten, S.R.A.; Kootstra, A.M.J.


    Phosphorus was recovered from the ash obtained after combustion at different temperatures (600 °C, 750 °C and 900 °C) and after gasification (at 820 °C using a mixture of air and steam as fluidising agent) of char from sewage sludge fast pyrolysis carried out at 530 °C. Depending on the leaching con

  7. Application of polymeric flocculant for enhancing settling of the pond ash particles and water drainage from hydraulically stowed pond ash

    Institute of Scientific and Technical Information of China (English)

    Mishra Devi Prasad; Das Samir Kumar


    Delayed settling of the ash particles and poor drainage of water from the pond ash are the major problems faced during the hydraulic stowing of pond ash.In this study the effect of polymeric flocculant on settling of the ash particles and drainage of water during pond ash stowing are investigated.In addition,the parameters,viz.drainage and absorption of water during pond ash stowing are quantified by stowing a mine goaf model with pond ash slurries of five different concentrations added with and without flocculant.The study revealed that addition of only 5 × 10-6 of Sodium Carboxymethyl Cellulose (Na-CMC)flocculant with the pond ash slurries during stowing offers best result in terms of quicker settling of the ash particles and enhanced water drainage from the hydraulically stowed pond ash.Besides,it resulted in drainage of more than 85% of the total water used in the initial 45 min of stowing.The improvement in drainage is caused due to coagulation and flocculation of the pond ash particles because of charge neutralization and particle-particle bridging.This study may provide a basis for estimating the drainage and absorption of water during the real pond ash stowing operation in underground mines.

  8. Characterizing uncertainty in the motion, future location and ash concentrations of volcanic plumes and ash clouds (United States)

    Webley, P.; Patra, A. K.; Bursik, M. I.; Pitman, E. B.; Dehn, J.; Singh, T.; Singla, P.; Stefanescu, E. R.; Madankan, R.; Pouget, S.; Jones, M.; Morton, D.; Pavolonis, M. J.


    Forecasting the location and airborne concentrations of volcanic ash plumes and their dispersing clouds is complex and knowledge of the uncertainty in these forecasts is critical to assess and mitigate the hazards that could exist. We show the results from an interdisciplinary project that brings together scientists drawn from the atmospheric sciences, computer science, engineering, mathematics, and geology. The project provides a novel integration of computational and statistical modeling with a widely-used volcanic particle dispersion code, to provide quantitative measures of confidence in predictions of the motion of ash clouds caused by volcanic eruptions. We combine high performance computing and stochastic analysis, resulting in real time predictions of ash cloud motion that account for varying wind conditions and a range of model variables. We show how coupling a real-time model for ash dispersal, PUFF, with a volcanic eruption model, BENT, allows for the definition of the variability in the dispersal model inputs and hence classify the uncertainty that can then propagate for the ash cloud location and downwind concentrations. We additionally analyze the uncertainty in the numerical weather prediction forecast data used by the dispersal model by using ensemble forecasts and assess how this affects the downwind concentrations. These are all coupled together and by combining polynomical chaos quadrature with stochastic integration techniques, we provide a quantitative measure of the reliability (i.e. error) of those predictions. We show comparisons of the downwind height calculations and mass loadings with observations of ash clouds available from satellite remote sensing data. The aim is to provide a probabilistic forecast of location and ash concentration that can be generated in real-time and used by those end users in the operational ash cloud hazard assessment environment.

  9. Ash3d: A finite-volume, conservative numerical model for ash transport and tephra deposition (United States)

    Schwaiger, Hans F.; Denlinger, Roger P.; Mastin, Larry G.


    We develop a transient, 3-D Eulerian model (Ash3d) to predict airborne volcanic ash concentration and tephra deposition during volcanic eruptions. This model simulates downwind advection, turbulent diffusion, and settling of ash injected into the atmosphere by a volcanic eruption column. Ash advection is calculated using time-varying pre-existing wind data and a robust, high-order, finite-volume method. Our routine is mass-conservative and uses the coordinate system of the wind data, either a Cartesian system local to the volcano or a global spherical system for the Earth. Volcanic ash is specified with an arbitrary number of grain sizes, which affects the fall velocity, distribution and duration of transport. Above the source volcano, the vertical mass distribution with elevation is calculated using a Suzuki distribution for a given plume height, eruptive volume, and eruption duration. Multiple eruptions separated in time may be included in a single simulation. We test the model using analytical solutions for transport. Comparisons of the predicted and observed ash distributions for the 18 August 1992 eruption of Mt. Spurr in Alaska demonstrate to the efficacy and efficiency of the routine.

  10. Ash fusion temperatures and their association with the transformations of coal ash particles to slag

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, S.K.; Wall, T.F.; Gupta, R.P. [Cooperative Research Centre for Black Coal Utilisation, Newcastle, NSW (Australia); Creelman, R.A. [Creelman (R.A.) and Associates, Sydney, NSW (Australia)


    Ash deposition on furnace walls in PF (pulverized fuel) furnaces is called slagging when it occurs in the high temperature areas of furnaces directly exposed to flame radiation and fouling in other regions such as tubes in the convection section of the boiler. There are well documented shortcomings of certain approaches relating to their uncertainties as predictive tools for plant performance such as poor repeatability and re-producibility of ash fusion measurements. The nature of physical and chemical changes occurring during melting of coal ash has been investigated in the current study to provide an alternative procedure to the ash fusion test. Shrinkage measurements are frequently used in metallurgy and ceramic science to study the physical properties of materials at high temperatures. The output of this experiment provides three to four `peaks` (maximum rate of shrinkage with temperature) of different intensity and at different temperatures which are related to melting characteristics of the sample. It was concluded that shrinkage extents exceeding 50 percent indicated that the effect of the ash particle size is of secondary importance compared to ash chemistry in determining shrinkage levels, with fine particles giving rapid shrinkage events 10 degrees C lower in temperature. (author). 7 figs., refs.

  11. Future fly ash marketing; Flugaschevermarktung in der Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Mauder, R.; Hugot, A. [Evonik Power Minerals GmbH, Dinslaken (Germany)


    It can be assumed that the fly ash production volumes will undergo a marked increase over the next few years. The conditions of fly ash production will improve as a result of modern and refurbished power plants, yielding a positive effect on the quality of fly ashes. Other vital parameters of future fly ash marketing are fly ash logistics and the infrastructure of power plants. Basically, economic utilisation of the increased production volumes is possible; however, new and long-term strategies are necessary. (orig.)

  12. Analysis list: Ash2l [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Ash2l Blood + mm9 ...

  13. Analysis list: ash1 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ash1 Cell line + dm3 ...

  14. Analysis list: ash2 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ash2 Larvae + dm3 ... ...

  15. Electrodialytic removal of Cd from biomass combustion fly ash suspensions

    DEFF Research Database (Denmark)

    Kirkelund, Gunvor M.; Ottosen, Lisbeth M.; Damoe, Anne J.


    Due to relatively high concentrations of Cd, biomass combustion fly ashes often fail to meet Danish legislative requirements for recycling as fertilizer. In this study, the potential of using electrodialytic remediation for removal of Cd from four different biomass combustion fly ashes was invest......Due to relatively high concentrations of Cd, biomass combustion fly ashes often fail to meet Danish legislative requirements for recycling as fertilizer. In this study, the potential of using electrodialytic remediation for removal of Cd from four different biomass combustion fly ashes...... the final Cd concentration was below 2.0. mg Cd/kg DM in at least one experiment done with each ash. This was obtained within 2 weeks of remediation and at liquid to solid (L/S) ratios of L/S 16 for the pre-washed straw ash and L/S 8 for the straw, co-firing and wood ash. © 2013 Elsevier B.V....

  16. Fly ash of mineral coal as ceramic tiles raw material. (United States)

    Zimmer, A; Bergmann, C P


    The aim of this work was to evaluate the use of mineral coal fly ash as a raw material in the production of ceramic tiles. The samples of fly ash came from Capivari de Baixo, a city situated in the Brazilian Federal State of Santa Catarina. The fly ash and the raw materials were characterized regarding their physical chemical properties, and, based on these results; batches containing fly ash and typical raw materials for ceramic tiles were prepared. The fly ash content in the batches varied between 20 and 80 wt%. Specimens were molded using a uniaxial hydraulic press and were fired. All batches containing ash up to 60 wt% present adequate properties to be classified as several kinds of products in the ISO 13006 standard () regarding its different absorption groups (pressed). The results obtained indicate that fly ash, when mixed with traditional raw materials, has the necessary requirements to be used as a raw material for production of ceramic tiles.

  17. Experimental study on fly ash capture mercury in flue gas

    Institute of Scientific and Technical Information of China (English)



    Systematic experiments were conducted on a fixed-bed reactor to investigate the interaction between fly ash and mercury,the results implied that fly ash can capture mercury effectively.Among different fly ashes,the unburned carbon in the FA2 and FA3 fly ashes has the highest mercury capture capacity,up to 10.3 and 9.36 μg/g,respectively,which is close to that of commercial activated carbon.There is no obvious relationship between mercury content and carbon content or BET surface area of fly ash.Petrography classification standard was applied to distinguish fly ash carbon particles.Carbon content is not the only variable that controls mercury capture on fly ash,there are likely significant differences in the mercury capture capacities of the various carbon forms.Mercury capture capacity mainly depends on the content of anisotropy carbon particles with porous network structure.

  18. Residual Ash Formation during Suspension-Firing of Biomass

    DEFF Research Database (Denmark)

    Damø, Anne Juul; Jappe Frandsen, Flemming; Jensen, Peter Arendt


    Through 50+ years, high quality research has been conducted in order to characterize ash and deposit formation in utility boilers fired with coal, biomass and waste fractions. The basic mechanism of fly ash formation in suspension fired coal boilers is well described, documented and may even...... be modeled relatively precisely. Concerning fly ash formation from biomass or waste fractions, the situation is not nearly as good. Lots of data are available from campaigns where different ash fractions, including sometimes also in-situ ash, have been collected and analyzed chemically and for particle size...... distribution. Thus, there is a good flair of the chemistry of fly ash formed in plants fired with biomass or waste fractions, either alone, or in conjunction with coal. But data on dedicated studies of the physical size development of fly ash, are almost non-existing for biomasses and waste fractions...

  19. Volcanic Ash fall Impact on Vegetation, Colima 2005 (United States)

    Garcia, M. G.; Martin, A.; Fonseca, R.; Nieto, A.; Radillo, R.; Armienta, M.


    An ash sampling network was established arround Colima Volcano in 2005. Ash fall was sampled on the North, Northeast, East, Southeast, South, Southwest and West of the volcano. Samples were analyzed for ash components, geochemistry and leachates. Ash fall ocurred on April (12), May (10, 23), June (2, 6, 9, 10, 12, 14), July (27), September (27), October (23) and November (24). Most of the ash is made of andesitic dome-lithics but shows diferences in crystal, juvenile material and lithic content. In May, some samples contained grey and dark pumice (scoria). Texture varies from phi >4 to phi 0. Leachate concentration were low: SO4 (7.33-54.19) Cl- (2.29-4.97) and F- (0.16-0.37). During 2005, Colima Volcano's ash fall rotted some of the guava and peach fruits and had a drying effect on spearment and epazote plants. Even these small ash amounts could have hindered sugar cane and agave growth.

  20. Contribution to bionomy of Hylesinus fraxini (Coleoptera: Curculionidae: Scolytinae and its monogamy in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Lukášová Karolina


    Full Text Available This study focused on bionomics of the ash bark beetle Hylesinus fraxini (Panzer 1779. The study area was at Jílové u Prahy in the Central Bohemian Region of the Czech Republic. In February 2014, three common ash (Fraxinus excelsior trees were felled and Hylesinus fraxini infestation was subsequently observed from March. Beetles were collected from 20 debarked logs and dissected under stereomicroscope, and their sex was determined. Five logs with bark beetles were placed into photoeclectors. Beetles that emerged were collected and put into the second photoeclector with fresh ash wood to determine whether they would establish the second generation. The analysis showed that each gallery system with a pair of bark beetles contained one male with only one female. If one adult of H. fraxini was found in the gallery system, it was usually female. Therefore, possible polygamy of Hylesinus fraxini was not confirmed in Central Bohemia. Maternal gallery length significantly correlated with the number of eggs laid per female. Offspring beetles did not establish the second generation, as only maturation feeding occurred in fresh wood.

  1. Effects of nano-SiO(2) and different ash particle sizes on sludge ash-cement mortar. (United States)

    Lin, K L; Chang, W C; Lin, D F; Luo, H L; Tsai, M C


    The effects of nano-SiO(2) on three ash particle sizes in mortar were studied by replacing a portion of the cement with incinerated sewage sludge ash. Results indicate that the amount of water needed at standard consistency increased as more nano-SiO(2) was added. Moreover, a reduction in setting time became noticeable for smaller ash particle sizes. The compressive strength of the ash-cement mortar increased as more nano-SiO(2) was added. Additionally, with 2% nano-SiO(2) added and a cure length of 7 days, the compressive strength of the ash-cement mortar with 1 microm ash particle size was about 1.5 times better that of 75microm particle size. Further, nano-SiO(2) functioned to fill pores for ash-cement mortar with different ash particle sizes. However, the effects of this pore-filling varied with ash particle size. Higher amounts of nano-SiO(2) better influenced the ash-cement mortar with larger ash particle sizes.

  2. Generation of volcanic ash: a textural study of ash produced in various laboratory experiments (United States)

    Lavallée, Yan; Kueppers, Ulrich; Dingwell, Donald B.


    In volcanology, ash is commonly understood as a fragment of a bubble wall that gets disrupted during explosive eruptions. Most volcanic ashes are indeed the product of explosive eruptions, but the true definition is however that of a particle size being inferior to 2 mm. The term does not hold any information about its genesis. During fragmentation, particles of all sizes in various amounts are generated. In nature, fragmentation is a brittle response of the material (whether a rock or magma) caused by changes in 1) strain rate and 2) temperature, and/or 3) chemical composition. Here we used different experimental techniques to produce ash and study their physical characteristics. The effects of strain rate were investigated by deforming volcanic rocks and magma (pure silicate melt and crystal-bearing magma) at different temperatures and stresses in a uniaxial compression apparatus. Failure of pure silicate melts is spontaneous and generates more ash particles than fragmentation of crystal-bearing melts. In the latter, the abundance of generated ash correlates positively with the strain rate. We complemented this investigation with a study of particles generated during rapid decompression of porous rocks, using a fragmentation apparatus. Products of decompression experiments at different initial applied pore pressure show that the amount of ash generated by bubble burst increase with the initial applied pressure and the open porosity. The effects of temperature were investigated by dropping pure silicate melts and crystal-bearing magma at 900 and 1100°C in water at room temperature. Quenching of the material is accompanied by rapid contraction and near instantaneous fragmentation. Pure silicate melts respond more violently to the interaction with water and completely fragmented into small particles, including a variety of ash morphologies and surface textures. Crystal-bearing magmas however fragmented only very partially when in contact with water and produced a

  3. Production of ceramics from coal fly ash

    Directory of Open Access Journals (Sweden)

    Angjusheva Biljana


    Full Text Available Dense ceramics are produced from fly ash from REK Bitola, Republic of Macedonia. Four types of fly ash from electro filters and one from the collected zone with particles < 0.063 mm were the subject of this research. Consolidation was achieved by pressing (P= 133 MPa and sintering (950, 1000, 1050 and 11000C and heating rates of 3 and 100/min. Densification was realized by liquid phase sintering and solid state reaction where diopside [Ca(Mg,Al(Si,Al2O6] was formed. Ceramics with optimal properties (porosity 2.96±0.5%, bending strength - 47.01±2 MPa, compressive strength - 170 ±5 MPa was produced at 1100ºC using the heating rate of 10ºC/min.

  4. A review on the utilization of fly ash

    Energy Technology Data Exchange (ETDEWEB)

    M. Ahmaruzzaman [National Institute of Technology Silchar, Silchar (India). Department of Chemistry


    Fly ash, generated during the combustion of coal for energy production, is an industrial by-product which is recognized as an environmental pollutant. Because of the environmental problems presented by the fly ash, considerable research has been undertaken on the subject worldwide. In this paper, the utilization of fly ash in construction, as a low-cost adsorbent for the removal of organic compounds, flue gas and metals, light weight aggregate, mine back fill, road sub-base, and zeolite synthesis is discussed. A considerable amount of research has been conducted using fly ash for adsorption of NOx, SOx, organic compounds, and mercury in air, dyes and other organic compounds in waters. It is found that fly ash is a promising adsorbent for the removal of various pollutants. The adsorption capacity of fly ash may be increased after chemical and physical activation. It was also found that fly ash has good potential for use in the construction industry. The conversion of fly ash into zeolites has many applications such as ion exchange, molecular sieves, and adsorbents. Converting fly ash into zeolites not only alleviates the disposal problem but also converts a waste material into a marketable commodity. Investigations also revealed that the unburned carbon component in fly ash plays an important role in its adsorption capacity. Future research in these areas is also discussed. 428 refs., 3 figs., 7 tabs.

  5. A review on the utilization of fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Ahmaruzzaman, M. [Department of Chemistry, National Institute of Technology Silchar, Silchar-788010, Assam (India)


    Fly ash, generated during the combustion of coal for energy production, is an industrial by-product which is recognized as an environmental pollutant. Because of the environmental problems presented by the fly ash, considerable research has been undertaken on the subject worldwide. In this paper, the utilization of fly ash in construction, as a low-cost adsorbent for the removal of organic compounds, flue gas and metals, light weight aggregate, mine back fill, road sub-base, and zeolite synthesis is discussed. A considerable amount of research has been conducted using fly ash for adsorption of NO{sub x}, SO{sub x}, organic compounds, and mercury in air, dyes and other organic compounds in waters. It is found that fly ash is a promising adsorbent for the removal of various pollutants. The adsorption capacity of fly ash may be increased after chemical and physical activation. It was also found that fly ash has good potential for use in the construction industry. The conversion of fly ash into zeolites has many applications such as ion exchange, molecular sieves, and adsorbents. Converting fly ash into zeolites not only alleviates the disposal problem but also converts a waste material into a marketable commodity. Investigations also revealed that the unburned carbon component in fly ash plays an important role in its adsorption capacity. Future research in these areas is also discussed. (author)

  6. Evaluation of the leaching characteristics of wood ash and the influence of ash agglomeration

    Energy Technology Data Exchange (ETDEWEB)

    Steenari, B.-M.; Lindqvist, O. [Chalmers University of Technology, Goeteborg (Sweden); Karlsson, L.G. [Kemakta Consulting AB, Stockholm (Sweden)


    The release of mineral nutrients and other species from untreated and stabilised wood ash has been investigated. Stabilisation is applied with the aim to modify the solubility of ash components and the ash particle size, i.e. to form dense ash particle agglomerates. This process induces the formation of several secondary minerals. The most important reaction is the transformation of Ca(OH){sub 2} into CaCO{sub 3} which lowers the calcium leaching rate significantly. A significant fraction of the alkali metals, K and Na, is present in salts which are rapidly released. The short-term release of these salts, as simulated in laboratory experiments, was not reduced by the stabilisation methods applied. Generally, low leaching rates were observed for the important plant nutrients P and Mg as well as for Fe and other metals from both untreated and agglomerated ashes. Thermodynamics equilibrium modelling of the hardening process showed that in addition to the transformation of Ca(OH){sub 2} to CaCO{sub 3}, formation of the mineral ettringite is possible at a high pH. Experimental results have confirmed this. As the pH in the pore solution decreases during long-term leaching ettringite will be transformed into calcium carbonate and gypsum. In accordance with the experimental results, no formation of secondary solubility controlling potassium or sodium minerals was indicated by the modelling results. (author)

  7. Sustainable use of biofuel by recycling ash to forests: treatment of biofuel ash. (United States)

    Mahmoudkhani, Maryam; Richards, Tobias; Theliander, Hans


    The influence of treatment techniques on leaching properties of alkaline species from biofuel ash is investigated in this paper. Ash samples from combustion of biofuels in a circulating fluidized bed and grate-firing combustion plants are studied. The samples are treated using three different treatment techniques; self-hardening, thermal treatment, and hardening bythe addition of binding materials. Nontreated and treated samples are evaluated for the leaching properties of the alkaline compounds and, furthermore, are characterized with respect to both physical and chemical characteristics. The results show the influence of treatment techniques on the physical structure and leaching characteristics of alkaline species. Results also indicate that ash samples show different behavior when treated with different methods, i.e., the influence of treatment technique on controlling the leaching properties is highly dependent on the initial chemical composition of ash. It was also found that there is an interaction between leaching of limited and easily soluble species, e.g., calcium and potassium leaching. Therefore, to control the leaching rate of alkaline species from ash, the characteristics that correlate the leaching properties of both easily and limited soluble species need to be adjusted.

  8. Simualting the Phase Separated rp-ash (United States)

    Caplan, Matthew; Horowitz, Chuck; Berry, Donald


    The composition and phase separation of rp-ash on accreting neutron stars determine the thermal properties of the crust which must be understood to interpret observations of crust cooling in X-ray bursts. In this work, we report on recent large scale molecular dynamics simulations of the outer crust. Using the crust compositions calculated by Mckinven et al. 2016, we study the structure of the crystal that forms, as well as diffusion and thermal properties of the crust.

  9. Market assessment of PFBC ash use

    Energy Technology Data Exchange (ETDEWEB)

    Bland, A. E.; Brown, T. H., Western Research Institute


    Pressurized fluidized bed combustion (PFBC) of coal is undergoing demonstration in the United States, as well as throughout the world. American Electric Power`s (AEP`s) bubbling PFBC 70 MWe Tidd demonstration program in Ohio and pilot-scale development at Foster Wheeler Energia Oy 10 MWth circulating PFBC at Karhula, Finland, have demonstrated the advantages of PFBC technology. Further technology development in the US is planned with the deployment of the technology at the MacIntosh Clean Coal project in Lakeland, Florida. Development of uses for solid wastes from PFBC coal-fired power systems is being actively pursued as part of the demonstration of PFBC technologies. Ashes collected from Foster Wheeler Energia Oy pilot circulating PFBC tests in Karhula, Finland, operating on (1) low sulfur subbituminous and (2) high sulfur bituminous coal; and ash from the AEP`s high-sulfur bituminous coal-fired bubbling PFBC in Brilliant, Ohio, were evaluated in laboratory and pilot-scale ash use testing at Western Research Institute (WRI).

  10. Occupational exposure and DNA strand breakage of workers in bottom ash recovery and fly ash treatment plants. (United States)

    Chen, Hsiu-Ling; Chen, I-Ju; Chia, Tai-Pao


    Various environmental hazards and metals are liberated either into bottom ash or carried away with gases and subsequently trapped in fly ash. Many studies have reported an increase of DNA damage is related to hazardous exposure of municipal waste incinerators. By detecting DNA damage, we compared the DNA migration imposed in workers potentially exposed to hazardous substances, including PCDD/Fs, metals, and silica particles, at a bottom ash recovery plant and fly ash treatment plants in Taiwan. Higher tail moment (TMOM) was found in workers at fly ash treatment plants (7.55) than in the workers in bottom ash plants (2.64), as well as those in blue collar was higher than in white collar workers (5.72 vs. 3.95). Meanwhile, the significantly higher DNA damage was also shown in workers with high integrated exposure score than those with low. The air samplings for particle mass, Cr, and Al concentrations also showed the higher levels in fly ash treatment plants than in the workers in bottom ash plants. Meanwhile, the air samplings inside the two plants suggested that the particle size might be important to affect the workers inhaling the metal into the human body and finally caused to their DNA damage. The data concluded that an elevated DNA damage may be expected in workers at fly ash treatment plants than those at bottom ash plants; however, the occupational hazards in both types of plants, especially at different particle size interval, need more thorough assessment in future studies.

  11. Crowdsourcing genomic analyses of ash and ash dieback – power to the people

    Directory of Open Access Journals (Sweden)

    MacLean Dan


    Full Text Available Abstract Ash dieback is a devastating fungal disease of ash trees that has swept across Europe and recently reached the UK. This emergent pathogen has received little study in the past and its effect threatens to overwhelm the ash population. In response to this we have produced some initial genomics datasets and taken the unusual step of releasing them to the scientific community for analysis without first performing our own. In this manner we hope to ‘crowdsource’ analyses and bring the expertise of the community to bear on this problem as quickly as possible. Our data has been released through our website at and a public GitHub repository.

  12. Environmental impact of using fly ash in concrete

    Energy Technology Data Exchange (ETDEWEB)


    An attempt was made to estimate the chemical composition of fly ash using the known chemical composition of coals from numerous regions of the country and the known behavior of elements in a limited number of coal and fly-ash samples. This technique assumes that each element in every piece of coal in the United States partitions itself into fly ash to the same extent and leaches from fly ash at the same rate. Using these limited data, enrichment factors were then calculated by dividing the composition in the fly ash by the composition in the corresponding coal samples. These enrichment factors were then applied to all of the coal samples for which chemical compositions were available to estimate the chemical composition of the fly ash.

  13. Volcanic ash as an oceanic iron source and sink (United States)

    Rogan, Nicholas; Achterberg, Eric P.; Le Moigne, Frédéric A. C.; Marsay, Chris M.; Tagliabue, Alessandro; Williams, Richard G.


    Volcanic ash deposition to the ocean forms a natural source of iron (Fe) to surface water microbial communities. Inputs of lithogenic material may also facilitate Fe removal through scavenging. Combining dissolved Fe (dFe) and thorium-234 observations alongside modeling, we investigate scavenging of Fe in the North Atlantic following the Eyjafjallajökull volcanic eruption. Under typical conditions biogenic particles dominate scavenging, whereas ash particles dominate during the eruption. The size of particles is important as smaller scavenging particles can become saturated with surface-associated ions. Model simulations indicate that ash deposition associated with Eyjafjallajökull likely led to net Fe removal. Our model suggests a threefold greater stimulation of biological activity if ash deposition had occurred later in the growing season when the region was Fe limited. The implications of ash particle scavenging, eruption timing, and particle saturation need to be considered when assessing the impact of ash deposition on the ocean Fe cycle and productivity.

  14. Biofuel Combustion Fly Ash Influence on the Properties of Concrete

    Directory of Open Access Journals (Sweden)

    Aurelijus Daugėla


    Full Text Available Cement as the binding agent in the production of concrete can be replaced with active mineral admixtures. Biofuel combustion fly ash is one of such admixtures. Materials used for the study: Portland cement CEM I 42.5 R, sand of 0/4 fraction, gravel of 4/16 fraction, biofuel fly ash, superplasticizer, water. Six compositions of concrete were designed by replacing 0%, 5%, 10%, 15% 20%, and 25% of cement with biofuel fly ash. The article analyses the effect of biofuel fly ash content on the properties of concrete. The tests revealed that the increase of biofuel fly ash content up to 20% increases concrete density and compressive strength after 7 and 28 days of curing and decreases water absorption, with corrected water content by using plasticizing admixture. It was found that concrete where 20% of cement is replaced by biofuel ash has higher frost resistance.

  15. Risk assessment of replacing conventional P fertilizers with biomass ash

    DEFF Research Database (Denmark)

    Cruz Paredes, Carla; Lopez Garcia, Alvaro; Rubæk, Gitte H.;


    Reutilizing biomass ashes in agriculture can substitute inputs of P from finite primary sources. However, recycling of ashes is disputed due to their content of toxic substances such as heavy metals. This study evaluates the potential risk of replacing easily soluble inorganic P fertilizer with P...... application, grain, straw and root dry matter yield, and P and Cd uptake were determined. Resin-extractable P was measured in soil and the symbiotic arbuscular mycorrhizal fungal activity, colonization, and community composition were assessed. Crop yield was not affected by ash application, while P......-uptake and mycorrhizal status were slightly enhanced with high ash applications. Changes to the mycorrhizal community composition were evident with high ash doses. Cadmium uptake in aboveground plant tissue was unaffected by ash treatments, but increased in roots with increasing doses. Consequently, we conclude...

  16. The behavior of ash species in suspension fired biomass boilers

    DEFF Research Database (Denmark)

    Jensen, Peter Arendt

    technology a long range of research studies have been conducted, to improve our understanding of the influence and behavior of biomass ash species in suspension fired boilers. The fuel ash plays a key role with respect tooptimal boiler operation and influences phenomena’s as boiler chamber deposit formation......, corrosion of steam coils, deactivation of SCR catalysts and utilization of residual products. Abroad range of research tools as probe measurements on power plants, entrain flow reactorstudies and deposit modelling have been used to gain an improved understanding of ash transformation and ash deposit...... to generate ash particles typically in the size range of 50 to 200 μm on biomass suspension fired power plant boilers. A fragmentation rate of fuel particles of 3 have been used to describe both the residual ash formation process in laboratory entrained flow reactors and in full scale boilers.A range...

  17. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)


    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  18. Ash chemistry and sintering, verification of the mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Hupa, M.; Skrifvars, B.J. [Aabo Akademi, Turku (Finland)


    In this project four sintering mechanisms have been studied, i.e., partial melting with a viscous liquid, partial melting with a non-viscous liquid, chemical reaction sintering and solid state sintering. The work has aimed at improving the understanding of ash sintering mechanisms and quantifying their role in combustion and gasification. The work has been oriented in particular on the understanding of biomass ash behavior. The work has not directly focused on any specific technical application. However, results can also be applied on other fuels such as brown coal, petroleum coke, black liquor and different types of wastes (PDF, RDF, MSW). In one part of study the melting behavior was calculated for ten biomass ashes and compared with lab measurements of sintering tendencies. The comparison showed that the T{sub 15} temperatures, i.e. those temperatures at which the ashes contained 15 % molten phase, correlated fairly well with the temperature at which the sintering measurements detected sintering. This suggests that partial melting can be predicted fairly accurate for some ashes already with the today existing thermodynamic calculation routines. In some cases, however the melting calculations did not correlate with the detected sintering temperatures. In a second part detailed measurements on ash behavior was conducted both in a semi full scale CFB and a lab scale FBC. Ashes and deposits were collected and analyzed in several different ways. These analyses show that the ash chemistry shifts radically when the fuel is shifted. Fuels with silicate based ashes behaved totally different than those with an oxide or salt based ash. The chemistry was also affected by fuel blending. The ultimate goal has been to be able to predict the ash thermal behavior during biomass thermal conversion, using the fuel and ash elemental analyses and a few operational key parameters as the only input data. This goal has not yet today been achieved. (author)

  19. Potential fly-ash utilization in agriculture: A global review

    Institute of Scientific and Technical Information of China (English)

    Manisha Basu; Manish Pande; P.B.S. Bhadoria; S.C. Mahapatra


    Though in last four decades various alternate energy sources have come into the limelight, the hyperbolic use of coal as a prime energy source cannot be counterbalanced. Disposal of high amount of fly-ash from thermal power plants absorbs huge amount of water, energy and land area by ash ponds. In order to meet the growing energy demand, various environmental, economic and social problems associated with the disposal of fly-ash would continue to increase. Therefore, fly-ash management would remain a great concern of the century. Fly-ash has great potentiality in agriculture due to its efficacy in modification of soil health and crop performance. The high concentration of elements (K, Na, Zn, Ca, Mg and Fe) in fly-ash increases the yield of many agricultural crops. But compared to other sectors, the use of fly-ash in agriculture is limited. An exhaustive review of numerous studies of last four decades took place in this paper, which systematically covers the importance, scope and apprehension regarding utilization of fly-ash in agriculture. The authors concluded that though studies have established some solutions to handle the problems of radioactivity and heavy metal content in flyash, long-term confirmatory research and demonstration are necessary. This paper also identified some areas, like proper handling of dry ash in plants as well as in fields, ash pond management (i.e., faster decantation, recycling of water, vertical expansion rather than horizontal), monitoring of soil health, crop quality, and fate of fly-ash in time domain, where research thrust is required. Agricultural lime application contributes to global warming as Intergovernmental Panel on Climate Change (IPCC) assumes that all the carbon in agricultural lime is finally released as CO2to the atmosphere. It is expected that use of fly-ash instead of lime in agriculture can reduce net CO2emission, thus reduce global warming also.

  20. Improved prediction and tracking of volcanic ash clouds (United States)

    Webley, P.; Mastin, L.


    During the past 30??years, more than 100 airplanes have inadvertently flown through clouds of volcanic ash from erupting volcanoes. Such encounters have caused millions of dollars in damage to the aircraft and have endangered the lives of tens of thousands of passengers. In a few severe cases, total engine failure resulted when ash was ingested into turbines and coating turbine blades. These incidents have prompted the establishment of cooperative efforts by the International Civil Aviation Organization and the volcanological community to provide rapid notification of eruptive activity, and to monitor and forecast the trajectories of ash clouds so that they can be avoided by air traffic. Ash-cloud properties such as plume height, ash concentration, and three-dimensional ash distribution have been monitored through non-conventional remote sensing techniques that are under active development. Forecasting the trajectories of ash clouds has required the development of volcanic ash transport and dispersion models that can calculate the path of an ash cloud over the scale of a continent or a hemisphere. Volcanological inputs to these models, such as plume height, mass eruption rate, eruption duration, ash distribution with altitude, and grain-size distribution, must be assigned in real time during an event, often with limited observations. Databases and protocols are currently being developed that allow for rapid assignment of such source parameters. In this paper, we summarize how an interdisciplinary working group on eruption source parameters has been instigating research to improve upon the current understanding of volcanic ash cloud characterization and predictions. Improved predictions of ash cloud movement and air fall will aid in making better hazard assessments for aviation and for public health and air quality. ?? 2008 Elsevier B.V.

  1. Reuse of Woody Biomass Ash Waste in Cementitious Materials


    Ukrainczyk, N.; Vrbos, N.; Koenders, E.A.B.


    There is an increased interest in the reuse of ash waste from biomass combustion, being a sustainable source of energy. This paper investigates the partial replacement of cement and sand in building materials with fly ash waste generated from combustion of woody biomass waste. The results show that the ash widens the particle size distribution of cement and has minerals complementary to portland cement, thus justifying its application as cement replacement, but with a relatively high amoun...

  2. The Cement Solidification of Municipal Solid Waste Incineration Fly Ash

    Institute of Scientific and Technical Information of China (English)

    HOU Haobo; HE Xinghua; ZHU Shujing; ZHANG Dajie


    The chemical composition, the content and the leachability of heavy metals in municipal solid waste incineration ( MSWI) fly ash were tested and analyzed. It is shown that the leachability of Pb and Cr exceeds the leaching toxicity standard, and so the MSWI fly ash is considered as hazardous waste and must be solidifled. The effect of solidifying the MSWI fly ash by cement was studied, and it is indicated that the heavy metals can be well immobilized if the mass fraction of the fly ash is appropriate. The heavy metals were immobilized within cement hydration products through either physical fixation, substitution, deposition or adsorption mechanisms.

  3. Experimental Study on Volume for Fly Ash of Building Block

    Directory of Open Access Journals (Sweden)

    Ling Wang


    Full Text Available Fly ash is a waste substance from thermal power plants, steel mills, etc. That is found in abundance in the world. It has polluted the environment, wasting the cultivated land. This study introduces an experimental research on fly ash being reused effectively, the study introduces raw materials of fly ash brick, production process and product inspection, fly ash content could be amounted to 40%~75%. High doping fly ash bricks are manufactured, which selects wet fly ash from the power plants, adding aggregate with reasonable ratio and additives with reasonable dosage and do the experimental research on manufacture products for properties, production technology and selection about technology parameter of production equipment. Index of strength grade and freezing-thawing resisting etc and the high doping fly ash brick building which we are working on can achieve the national standard on building materials industry. Based on the tests, this achievement of research has a very wide practical prospect in using fly ash, industrial waste residue, environmental protection and reducing the cost of enterprises. The efficient reuse of fly ash from coal boiler and power plants has very vital significance of protecting the environment, benefiting descendants and developing of circular economy.

  4. Heavy metal characterization of circulating fluidized bed derived biomass ash. (United States)

    Li, Lianming; Yu, Chunjiang; Bai, Jisong; Wang, Qinhui; Luo, Zhongyang


    Although the direct combustion of biomass for energy that applies circulating fluidized bed (CFB) technology is steadily expanding worldwide, only few studies have conducted an environmental assessment of biomass ash thus far. Therefore, this study aims to integrate information on the environmental effects of biomass ash. We investigated the concentration of heavy metal in biomass ash samples (bottom ash, cyclone ash, and filter ash) derived from a CFB boiler that combusted agricultural and forest residues at a biomass power plant (2×12 MW) in China. Ash samples were gathered for the digestion and leaching test. The heavy metal content in the solution and the leachate was studied via an inductively coupled plasma-mass spectrometer and a Malvern Mastersizer 2000 mercury analyzer. Measurements for the chemical composition, particle size distribution, and the surface morphology were carried out. Most of the metals in cyclone ash particles were enriched, whereas Ti and Hg were enriched in filter ash. Residence time contributed most to heavy metal enrichment. Under HJ/T 300 conditions, the heavy metals showed serious leaching characteristics. Under EN 12457-2 conditions, leaching behavior was hardly detected.

  5. Environmental hazard of oil shale combustion fly ash. (United States)

    Blinova, Irina; Bityukova, Liidia; Kasemets, Kaja; Ivask, Angela; Käkinen, Aleksandr; Kurvet, Imbi; Bondarenko, Olesja; Kanarbik, Liina; Sihtmäe, Mariliis; Aruoja, Villem; Schvede, Hedi; Kahru, Anne


    The combined chemical and ecotoxicological characterization of oil shale combustion fly ash was performed. Ash was sampled from the most distant point of the ash-separation systems of the Balti and Eesti Thermal Power Plants in North-Eastern Estonia. The fly ash proved potentially hazardous for tested aquatic organisms and high alkalinity of the leachates (pH>10) is apparently the key factor determining its toxicity. The leachates were not genotoxic in the Ames assay. Also, the analysis showed that despite long-term intensive oil-shale combustion accompanied by considerable fly ash emissions has not led to significant soil contamination by hazardous trace elements in North-Eastern Estonia. Comparative study of the fly ash originating from the 'new' circulating fluidized bed (CFB) combustion technology and the 'old' pulverized-fired (PF) one showed that CFB fly ash was less toxic than PF fly ash. Thus, complete transfer to the 'new' technology will reduce (i) atmospheric emission of hazardous trace elements and (ii) fly ash toxicity to aquatic organisms as compared with the 'old' technology.

  6. Electrodialytic removal of cadmium from straw combustion fly ash

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Ottosen, Lisbeth M.; Villumsen, Arne


    Fly ash from straw combustion contains valuable nutrients when returned to agricultural soils. In many instances, however, this fly ash may contain heavy metals, such as cadmium, at levels which often exceed the limits given by the Danish legislation. Thus before utilizing the nutrients, cadmium...... must be removed from these ashes. The use of an electrodialytic remediation method to remove cadmium from fly ash arising from straw combustion and containing 11.2 mg Cd kg$+-1$/ DM (dry matter) was accessed. After 36 days of remediation at a constant current density of 5.6 mA cm$+-2$/ more than 97...

  7. Creep Behaviour of Fly Ash-Based Geopolymer Concrete



    Fly ash-based geopolymer concrete is manufactured using fly ash as its source material and does not use Portland cement at all. Beside fly ash, alkaline solution is also utilized to make geopolymer paste which binds the aggregates to form geopolymer concrete. This paper presents the study of creep behaviour of fly ash-based geopolymer concrete. Four series of specimens with various compressive strengths were prepared to study its creep behaviour for the duration of test up to one year. The te...

  8. Electrodialytic removal of Cd from biomass combustion fly ash

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.; Simonsen, Peter


    Due to a high concentration of Cd, biomass combustion fly ash often fails to meet the Danish legislative requirements for recycling on agricultural fields. In this work the potential of using the method Electrodialytic Remediation to reduce the concentration of Cd in different biomass combustion...... four ashes. Final Cd concentrations below 2.0 mg Cd/kg were reached in all ashes within 14 days of remediation and legislative requirements were met. After further optimization of the remediation process on the pre-washed straw ash, limiting concentrations were reached after only 48 hours...

  9. Assessing fly ash treatment: Remediation and stabilization of heavy metals

    KAUST Repository

    Lima, A.T.


    Fly ashes from Municipal Solid Waste (MSW), straw (ST) and co-combustion of wood (CW) are here analyzed with the intent of reusing them. Two techniques are assessed, a remediation technique and a solidification/stabilization one. The removal of heavy metals from fly ashes through the electrodialytic process (EDR) has been tried out before. The goal of removing heavy metals has always been the reuse of fly ash, for instance in agricultural fields (BEK). The best removal rates are here summarized and some new results have been added. MSW fly ashes are still too hazardous after treatment to even consider application to the soil. ST ash is the only residue that gets concentrations low enough to be reused, but its fertilizing value might be questioned. An alternative reuse for the three ashes is here preliminary tested, the combination of fly ash with mortar. Fly ashes have been substituted by cement fraction or aggregate fraction. Surprisingly, better compressive strengths were obtained by replacing the aggregate fraction. CW ashes presented promising results for the substitution of aggregate in mortar and possibly in concrete. © 2010 Elsevier Ltd.

  10. Geological behavior of wet outflow deposition fly ash

    Institute of Scientific and Technical Information of China (English)

    周德泉; 赵明华; 刘宏利; 周毅; 严聪


    The geological behaviors of wet outflow deposition fly ash were investigated, including the feature of in-situ single and even bridge cone penetration test (CPT) curves, the change of the penetration parameters and vane strength with the increase of depth and the difference of the penetration resistance on and down the water level. Drilling, CPT and vane shear test were carried out in silty clay, fine sand, and fly ash of the ash-dam. The CPT curves of the fly ash do not show a critical depth. The cone resistance (qc) of the fly ash is smaller than that of silty clay or sand; the friction resistance is smaller than that of filling silty clay, similar to that of deposition silty clay or more than that of fine sand; the friction ratio is smaller than that of filling silty clay, or more than that of deposition silty clay or much more than that of fine sand. The specific penetration resistance (ps) is similar to that of filling silty clay, or more than that of deposition silty clay. There is a clear interface effect between the deposition fly ash and the clay. Interface effect of ps-h curve at the groundwater table is clear, and ps of the fly ash reduces significantly under the table. The vane strength of the fly ash increases as the depth increases. The deposition fly ash with wet outflow is similar to silt in the geological behavior.

  11. Effect of refractory agent on ash fusibility temperatures of briquette

    Institute of Scientific and Technical Information of China (English)

    Guo-xing CUI; Kui HUANG; Ming-sui LIN


    To solve the problem of the low ash fusion point of briquette,this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash,which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air.The effects of Al2O3,SiO2,kaolin,dry powder and bentonite on ash fusibility temperatures were studied,based upon the relationship between briquette ash components and ash fusibility.The results show that the increasing of ash fusibility temperatures by adding the same amount (11%,w)of refractory agents follows the sequence of SiO2,bentonite,dry powder,kaolin,Al2O3,with the softening temperatures beingelevated by 37.2,57.6,60.4,82.6 and 104.4 ℃.With the same ratio of SiO2/Al2O3 in briquette,adding the Al2O3 component is more effective than SiO2 for raising ash fusibility temperatures.In this paper,inexpensive kaolin and bentonite rich in Al2O3 are found to be better refractory agents,and the suitable adding quantities are 9% and 11%,respectively.

  12. Surface Modification of Fly Ash for Active Catalysis

    Directory of Open Access Journals (Sweden)

    Deepti Jain


    Full Text Available Fly ash based effective solid base catalyst (KF/Al2O3/fly ash473, KF/Al2O3/fly ash673, and KF/Al2O3/fly ash873 was synthesized by loading KF over chemically and thermally activated fly ash. The chemical activation was done by treating fly ash with aluminum nitrate via precipitation method followed by thermal activation at 650°C to increase the alumina content in fly ash. The increased alumina content was confirmed by SEM-EDX analysis. The alumina enriched fly ash was then loaded with KF (10 wt% and calcined at three different temperatures 473 K, 673 K and 873 K. The amount of loaded KF was monitored by XRD, FTIR spectroscopy, SEM-EDX, TEM and Flame Atomic Absorption Spectrophotometer. The catalytic activities of the catalysts were tested in the Claisen-Schmidt condensation of benzaldehyde and 4-methoxybenzaldehyde with 2′-hydroxyacetophenone to produce 2′-hydroxychalcone and 4-methoxy-2′-hydroxychalcone respectively. Higher conversion (83% of benzaldehyde and (89% of 4-methoxybenzaldehyde reveals that among these heterogeneous catalysts KF/Al2O3/fly ash673 is very active.

  13. Utilisation of coal ash to improve acid soil

    Directory of Open Access Journals (Sweden)

    Shigeru Kato


    Full Text Available The study on utilization of coal ash to improve acid soil was carried out in a greenhouse at the Land Development Regional Office 1, Pathum Thani Province, Central Thailand, from January-May 2003. Fly ash mixture (fly ash plus gypsum and lime at the proportion 5:4:1 and clinker ash mixture (clinker ash plus gypsum and lime at the proportion 5:4:1 were used as soil amendments at varying rates i.e., 0, 6.25,12.5, 18.75 and 25 t/ha to improve the soil. The aim of this study was to determine the effect of application of coal ash on acid soil and the growth of a vegetable (Chinese kale. Chinese kale cultivars were planted in a randomized complete block design with three replications. Pak Chong soil series (Ultisols was used as the growth medium. Twenty-day-old seedlings were transplanted in 270 pots (two plants per pot containing acid soil with different treatments of coal ash mixture which were as follows: 1 control, 2 fly ash mixture 6.25 t/ha, 3 fly ash mixture 12.5 t/ha, 4 fly ash mixture 18.75 t/ha, 5 fly ash mixture 25 t/ha, 6 clinker ash mixture 6.25 t/ha, 7 clinker ash mixture 12.5 t/ha, 8 clinker ash mixture 18.75 t/ha and 9 clinker ash mixture 25 t/ha. Chemical fertilizers were applied at the rate of 250 kg/ha using a grade of 15-15-15 of N, P and K, respectively. Plants were harvested 40 days after transplanting. Among the treatments, application of fly ashmixture at a rate of 25t/ha (4t/rai substantially increased soil pH up to 5.7. Fly ash was found more effective than clinker ash in increasing soil pH. The highest yield of Chinese kale was also obtained when fly ash mixture was applied at a rate of 25 t/ha followed by fly ash mixture at 18.75 t/ha and clinker ash mixture at 18.75 t/ha with an average yield per plant of 4.980, 3.743 and 3.447 grams, respectively. It can be concluded that the application of coal ash mixture, either fly- or clinker ash, at 18.75-25 t/ha (3-4 t/rai was the most effective in terms of plant yield. The use of

  14. Ectomycorrhizal fungal diversity, tree diversity and root nutrient relations in a mixed Central European forest. (United States)

    Lang, Christa; Polle, Andrea


    Knowledge is limited about whether root nutrient concentrations are affected by mixtures of tree species and interspecific root competition. The goal of this field study was to investigate root nutrient element concentrations in relation to root and ectomycorrhizal (EM) diversity in six different mixtures of beech (Fagus sylvatica), ash (Fraxinus excelsior) and lime (Tilia sp.) in an old-growth, undisturbed forest ecosystem. Root biomass and nutrient concentrations per tree taxon as well as the abundance and identity of all EM fungi were determined in soil cores of a volume of 1 L (r=40 mm, depth=200 mm). Stand-level nutrient concentrations in overall root biomass and H' (Shannon-Wiener diversity) were obtained by pooling the data per stand. At stand level, Shannon H' for roots and aboveground tree species abundance were correlated. H' for roots and EM fungi were not correlated because of the contribution of ash roots that form only arbuscular mycorrhizal but no EM associations. Nutrient element concentrations in roots showed taxon-related differences and increased in the following order: beech ≤ lime tree diversity because of two effects: increasing contribution of ash roots to the mixture and increasing Ca accumulation in beech roots with increasing root diversity. On a small scale, increasing root diversity, but not EM diversity, was correlated with decreasing P concentrations in beech roots pointing to interspecific tree competition. Nitrogen (N) concentrations of beech roots were unaltered in relation to root and EM diversity. Opposing behavior was observed for lime and ash: the N concentrations in lime roots increased, whereas those in ash roots decreased with increasing EM diversity in a given soil volume. This suggests that EM diversity facilitates N acquisition of lime roots at the expense of non-EM ash.

  15. Durability of biomass fly ash concrete: Freezing and thawing and rapid chloride permeability tests

    Energy Technology Data Exchange (ETDEWEB)

    Shuangzhen Wang; Emilio Llamazos; Larry Baxter; Fernando Fonseca [Brigham Young University, Provo, UT (USA). Department of Chemical Engineering


    Strict interpretation of ASTM C 618 excludes non-coal fly ashes, such as biomass fly ashes from addition in concrete. Biomass fly ash in this investigation includes (1) cofired fly ash from burning biomass with coal; (2) wood fly ash and (3) blended fly ash (wood fly ash mixing with coal fly ash). A set of experiments conducted on concrete from pure cement and cement with fly ash provide basic data to assess the effects of several biomass fly ashes on the performances of freezing and thawing (F-T) and rapid chloride permeability test (RCPT). The F-T tests indicate that all fly ash concrete has statistically equal or less weight loss than the pure cement concrete (control). The RCPT illustrate that all kinds of fly ash concrete have lower chloride permeability than the pure cement control concrete. 37 refs., 5 figs.

  16. Gas generation in incinerator ash; Gasbildning i aska

    Energy Technology Data Exchange (ETDEWEB)

    Arm, Maria; Lindeberg, Johanna; Rodin, Aasa; Oehrstroem, Anna; Backman, Rainer; Oehman, Marcus; Bostroem, Dan


    In recent years, explosions have occurred in certain phases of ash handling in Sweden. Investigations have revealed that hydrogen may have been present in all cases. The hydrogen is believed to be generated by chemical reactions of aluminium and other metals within the ash in the presence of water. The purpose with this study is to increase the knowledge of gas generation of incinerator ash. Thereby, guides for appropriate ash management can be introduced and the risk for further explosions prevented. The study has comprised analyses of the ash properties, such as chemical and physical composition and the pH, of ash from 14 incineration plants (mostly waste incineration plants). Different fractions of ash materials representing different parts of the process in each plant have been analysed. Furthermore, the fuel and the technical differences between the plants have been analysed. A tool for measuring the gas generation in the laboratory has been developed and the gas generation of the different ash materials at natural and increased pH was measured. Gas analyses and thermodynamic calculations have also been performed. The results showed that: bottom ash from fluidised bed boilers generated small amounts of gas at increased pH, much smaller amounts than the idle pass, cyclone and filter ash did, bottom ash from grate fired boilers generated more gas at increased pH than their cyclone ash and filter ash, with exception of the Linkoeping plant, all bio waste incineration plants generated ash with low gas generation potential, all fly ash materials with a gas generation potential of more than 10 l/kg originated from municipal waste incineration plants, filter ash that had been stored in oxygen rich environment generated significant less gas than fresh filter ash of the same origin, hardly any other gases were generated apart from hydrogen (very small amounts of acetone, furane, benzene and most likely methane were detected in some of the ash materials), there were no

  17. Effects of water availability on emerald ash borer larval performance and phloem phenolics of Manchurian and black ash. (United States)

    Chakraborty, Sourav; Whitehill, Justin G A; Hill, Amy L; Opiyo, Stephen O; Cipollini, Don; Herms, Daniel A; Bonello, Pierluigi


    The invasive emerald ash borer (EAB) beetle is a significant threat to the survival of North American ash. In previous work, we identified putative biochemical and molecular markers of constitutive EAB resistance in Manchurian ash, an Asian species co-evolved with EAB. Here, we employed high-throughput high-performance liquid chromatography with photodiode array detection and mass spectrometry (HPLC-PDA-MS) to characterize the induced response of soluble phloem phenolics to EAB attack in resistant Manchurian and susceptible black ash under conditions of either normal or low water availability, and the effects of water availability on larval performance. Total larval mass per tree was lower in Manchurian than in black ash. Low water increased larval numbers and mean larval mass overall, but more so in Manchurian ash. Low water did not affect levels of phenolics in either host species, but six phenolics decreased in response to EAB. In both ashes, pinoresinol A was induced by EAB, especially in Manchurian ash. Pinoresinol A and pinoresinol B were negatively correlated with each other in both species. The higher accumulation of pinoresinol A in Manchurian ash after attack may help explain the resistance of this species to EAB, but none of the responses measured here could explain increased larval performance in trees subjected to low water availability.

  18. Coal Ash Corrosion Resistant Materials Testing

    Energy Technology Data Exchange (ETDEWEB)

    D. K. McDonald; P. L. Daniel; D. J. DeVault


    In April 1999, three identical superheater test sections were installed into the Niles Unit No.1 for the purpose of testing and ranking the coal ash corrosion resistance of candidate superheater alloys. The Niles boiler burns high sulfur coal (3% to 3.5%) that has a reasonably high alkali content, thus the constituents necessary for coal ash corrosion are present in the ash. The test sections were controlled to operate with an average surface metal temperature from approximately 1060 F to 1210 F which was well within the temperature range over which coal ash corrosion occurs. Thus, this combination of aggressive environment and high temperature was appropriate for testing the performance of candidate corrosion-resistant tube materials. Analyses of the deposit and scale confirmed that the aggressive alkali-iron-trisulfate constituent was present at the metal surface and active in tube metal wastage. The test sections were constructed so that the response of twelve different candidate tube and/or coating materials could be studied. The plan was to remove and evaluate one of the three test sections at time intervals of 1 year, 3 years, and 5 years. This would permit an assessment of performance of the candidate materials as a function of time. This report provides the results of the evaluation of Test Section C, including the samples that remained in the Test Section for the full exposure period as well as those that were removed early. The analysis of Test Section C followed much the same protocol that was employed in the assessment of Test Section A. Again, the focus was on determining and documenting the relative corrosion rates of the candidate materials. The detailed results of the investigation are included in this report as a series of twelve appendices. Each appendix is devoted to the performance of one of the candidate alloys. The table below summarizes metal loss rate for the worst case sample of each of the candidate materials for both Test Sections A and C

  19. Synthesis of ZSM-5 zeolite from lignite fly ash and rice husk ash

    Energy Technology Data Exchange (ETDEWEB)

    Chareonpanich, Metta; Namto, Teerapong; Kongkachuichay, Paisan [Department of Chemical Engineering, Kasetsart University, 50 Paholyothin Rd., Chatuchak, Bangkok 10900 (Thailand); Limtrakul, Jumras [Department of Chemistry, Kasetsart University, Chatuchak, Bangkok 10900 (Thailand)


    The lignite fly ash from the Mae-Moh power plant, Thailand, and rice husk ash were used as raw materials for ZSM-5 zeolite synthesis. Factors affecting the yield of ZSM-5 zeolite synthesized from fly ash, i.e., the SiO{sub 2}/Al{sub 2}O{sub 3} mole ratio, the presence of tetrapropyl ammonium bromide (TPABr, the structure-directing material for ZSM-5 zeolite synthesis), the holding temperature and time, and the initial pressure were investigated. It was found that without TPABr only zeolite P could be synthesized at SiO{sub 2}/Al{sub 2}O{sub 3} mole ratios of 2.8-200. In order to synthesize ZSM-5 zeolite, sodium silicate solution was added to adjust the SiO{sub 2}/Al{sub 2}O{sub 3} mole ratio in raw ash. The yield of ZSM-5 zeolite was as high as 59 wt.% when following conditions were used: SiO{sub 2}/Al{sub 2}O{sub 3} mole ratio, 40; the holding temperature, 210 C; the holding time, 4 h and the initial pressure, 4 bar. The catalytic performance for CO{sub 2} hydrogenation reaction of the ZSM-5 zeolite was preliminary tested and compared with that of commercial one. It was observed that there was no significant difference in the catalytic performance between these two catalysts.

  20. Illinois basin coal fly ashes. 2. Equilibria relationships and qualitative modeling of ash-water reactions (United States)

    Roy, W.R.; Griffin, R.A.


    Alkaline and acidic Illinois Basin coal fly ash samples were each mixed with deionized water and equilibrated for about 140 days to simulate ash ponding environments. Common to both equilibrated solutions, anhydrite solubility dominated Ca2+ activities, and Al3+ activities were in equilibrium with both matrix mullite and insoluble aluminum hydroxide phases. Aqueous silica activities were controlled by both mullite and matrix silicates. The pH of the extract of the acidic fly ash was 4.1 after 24 h but increased to a pH value of 6.4 as the H2SO4, assumed to be adsorbed to the particle surfaces, was exhausted by the dissolution of matrix iron oxides and aluminosilicates. The activities of aqueous Al3+ and iron, initially at high levels during the early stages of equilibration, decreased to below analytical detection limits as the result of the formation of insoluble Fe and Al hydroxide phases. The pH of the extract of the alkaline fly ash remained above a pH value of 10 during the entire equilibration interval as a result of the hydrolysis of matrix oxides. As with the acidic system, Al3+ activities were controlled by amorphous aluminum hydroxide phases that began to form after about 7 days of equilibration. The proposed mechanisms and their interrelations are discussed in addition to the solubility diagrams used to deduce these relationships. ?? 1984 American Chemical Society.

  1. Synergic Effect of Wheat Straw Ash and Rice-Husk Ash on Strength Properties of Mortar (United States)

    Goyal, Ajay; Kunio, Hattori; Ogata, Hidehiko; Garg, Monika; Anwar, A. M.; Ashraf, M.; Mandula

    Pozzolan materials obtained from various sources; when used as partial replacement for Portland cement in cement based applications play an important role not only towards sustainable development but in reducing the construction costs as well. Present study was conducted to investigate the synergic effect of Rice-Husk Ash (RHA) and Wheat Straw Ash (WSA) on the strength properties of ash substituted mortar. Ash materials were obtained after burning the wastes at 600°C for 5 h at a control rate of 2°C min. Two binary blends of mortar substituting 15% cement with WSA and RHA and three combinations of ternary blend with (10+5)%, (5+10)% and (7.5+7.5)% mix ratios of WSA and RHA, together with a control specimen were subjected to destructive (compressive and flexural strength) as well as non-destructive (ultrasonic pulse velocity) tests till 180 days of curing. Ternary blend with (7.5 + 7.5)% combination of WSA and RHA showed better strength results than control and other blends and proved to be the optimum combination for achieving maximum synergic effect.

  2. High temperature co-treatment of bottom ash and stabilized fly ashes from waste incineration

    DEFF Research Database (Denmark)

    Sørensen, Mette Abildgaard; Mogensen, E.P.B.; Lundtorp, Kasper


    Bottom ashes from two Danish municipal solid waste incineration plants were heated at 900 degreesC with iron oxide stabilized air pollution control residues at actual mass flow ratios (9:1), simulating a treating method for the residues. The two residues were cotreated, producing one combined...

  3. Optical Properties of Volcanic Ash: Improving Remote Sensing Observations (United States)

    Whelley, P.; Colarco, P. R.; Aquila, V.; Krotkov, N. A.; Bleacher, J. E.; Garry, W. B.; Young, K. E.; Lima, A. R.; Martins, J. V.; Carn, S. A.


    Many times each year explosive volcanic eruptions loft ash into the atmosphere. Global travel and trade rely on aircraft vulnerable to encounters with airborne ash. Volcanic ash advisory centers (VAACs) rely on dispersion forecasts and satellite data to issue timely warnings. To improve ash forecasts model developers and satellite data providers need realistic information about volcanic ash microphysical and optical properties. In anticipation of future large eruptions we can study smaller events to improve our remote sensing and modeling skills so when the next Pinatubo 1991 or larger eruption occurs, ash can confidently be tracked in a quantitative way. At distances >100km from their sources, drifting ash plumes, often above meteorological clouds, are not easily detected from conventional remote sensing platforms, save deriving their quantitative characteristics, such as mass density. Quantitative interpretation of these observations depends on a priori knowledge of the spectral optical properties of the ash in UV (>0.3μm) and TIR wavelengths (>10μm). Incorrect assumptions about the optical properties result in large errors in inferred column mass loading and size distribution, which misguide operational ash forecasts. Similarly, simulating ash properties in global climate models also requires some knowledge of optical properties to improve aerosol speciation. Recent research has identified a wide range in volcanic ash optical properties among samples collected from the ground after different eruptions. The database of samples investigated remains relatively small, and measurements of optical properties at the relevant particle sizes and spectral channels are far from complete. Generalizing optical properties remains elusive, as does establishing relationships between ash composition and optical properties, which are essential for satellite retrievals. We are building a library of volcanic ash optical and microphysical properties. In this presentation we show

  4. Extraction of vanadium from athabasca tar sands fly ash (United States)

    Gomez-Bueno, C. O.; Spink, D. R.; Rempel, G. L.


    The production of refinery grade oil from the Alberta tar sands deposits as currently practiced by Suncor (formally Great Canadian Oil Sands Ltd.—GCOS) generates a substantial amount of petroleum coke fly ash which contains appreciable amounts of valuable metals such as vanadium, nickel and titanium. Although the recovery of vanadium from petroleum ash is a well established commercial practice, it is shown in the present work that such processes are not suitable for recovery of vanadium from the GCOS fly ash. The fact that the GCOS fly ash behaves so differently when compared to other petroleum fly ash is attributed to its high silicon and aluminum contents which tie up the metal values in a silica-alumina matrix. Results of experiments carried out in this investigation indicate that such matrices can be broken down by application of a sodium chloride/water roast of the carbon-free fly ash. Based on results from a series of preliminary studies, a detailed investigation was undertaken in order to define optimum conditions for a vanadium extraction process. The process developed involves a high temperature (875 to 950 °C) roasting of the fly ash in the presence of sodium chloride and water vapor carried out in a rotary screw kiln, followed by dilute sodium hydroxide atmosphereic leaching (98 °C) to solublize about 85 pet of the vanadium originally present in the fly ash. It was found that the salt roasting operation, besides enhancing vanadium recovery, also inhibits silicon dissolution during the subsequent leaching step. The salt roasting treatment is found to improve vanadium recovery significantly when the fly ash is fully oxidized. This is easily achieved by burning off the carbon present in the “as received” fly ash under excess air. The basic leaching used in the new process selectively dissolves vanadium from the roasted ash, leaving nickel and titanium untouched.

  5. Retrieval of ash properties from IASI measurements (United States)

    Ventress, Lucy J.; McGarragh, Gregory; Carboni, Elisa; Smith, Andrew J.; Grainger, Roy G.


    A new optimal estimation algorithm for the retrieval of volcanic ash properties has been developed for use with the Infrared Atmospheric Sounding Interferometer (IASI). The retrieval method uses the wave number range 680-1200 cm-1, which contains window channels, the CO2 ν2 band (used for the height retrieval), and the O3 ν3 band.Assuming a single infinitely (geometrically) thin ash plume and combining this with the output from the radiative transfer model RTTOV, the retrieval algorithm produces the most probable values for the ash optical depth (AOD), particle effective radius, plume top height, and effective radiating temperature. A comprehensive uncertainty budget is obtained for each pixel. Improvements to the algorithm through the use of different measurement error covariance matrices are explored, comparing the results from a sensitivity study of the retrieval process using covariance matrices trained on either clear-sky or cloudy scenes. The result showed that, due to the smaller variance contained within it, the clear-sky covariance matrix is preferable. However, if the retrieval fails to pass the quality control tests, the cloudy covariance matrix is implemented.The retrieval algorithm is applied to scenes from the Eyjafjallajökull eruption in 2010, and the retrieved parameters are compared to ancillary data sources. The ash optical depth gives a root mean square error (RMSE) difference of 0.46 when compared to retrievals from the MODerate-resolution Imaging Spectroradiometer (MODIS) instrument for all pixels and an improved RMSE of 0.2 for low optical depths (AOD < 0.1). Measurements from the Facility for Airborne Atmospheric Measurements (FAAM) and Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR) flight campaigns are used to verify the retrieved particle effective radius, with the retrieved distribution of sizes for the scene showing excellent consistency. Further, the plume top altitudes are compared to derived cloud-top altitudes from the Cloud

  6. Screening coal combustion fly ashes for application in geopolymers

    NARCIS (Netherlands)

    Valcke, S.L.A.; Pipilikaki, P.; Sarabér, A.J.; Fischer, H.R.; Nugteren, H.W.


    Driven by cost and sustainability, secondary resource materials such as fly ash, blast furnace slag, and bottom ash are increasingly used for alternative types of concrete binders, such as geopolymers. Because secondary resources may be highly variable from the perspective of geopolymers, it is ofte

  7. Estimating the frequency of volcanic ash clouds over northern Europe (United States)

    Watson, E. J.; Swindles, G. T.; Savov, I. P.; Lawson, I. T.; Connor, C. B.; Wilson, J. A.


    Fine ash produced during explosive volcanic eruptions can be dispersed over a vast area, where it poses a threat to aviation, human health and infrastructure. Here, we focus on northern Europe, which lies in the principal transport direction for volcanic ash from Iceland, one of the most active volcanic regions in the world. We interrogate existing and newly produced geological and written records of past ash fallout over northern Europe in the last 1000 years and estimate the mean return (repose) interval of a volcanic ash cloud over the region to be 44 ± 7 years. We compare tephra records from mainland northern Europe, Great Britain, Ireland and the Faroe Islands, with records of proximal Icelandic volcanism and suggest that an Icelandic eruption with a Volcanic Explosivity Index rating (VEI) ≥ 4 and a silicic magma composition presents the greatest risk of producing volcanic ash that can reach northern Europe. None of the ash clouds in the European record which have a known source eruption are linked to a source eruption with VEI < 4. Our results suggest that ash clouds are more common over northern Europe than previously proposed and indicate the continued threat of ash deposition across northern Europe from eruptions of both Icelandic and North American volcanoes.

  8. Leaching of nutrient salts from fly ash from biomass combustion

    DEFF Research Database (Denmark)

    Thomsen, Kaj; Vu, Duc Thuong; Stenby, Mette;


    . The first method was a counter current moving bed process in four stages. The ash was kept in filter bags and leached with water that was introduced into the bags at 40-50°C. In the second method, fly ash and water was brought into contact in a partially fluidized bed. The third method was a counter current...

  9. A fly ash and shale fired brick production line

    Institute of Scientific and Technical Information of China (English)



    The article describes the fly ash and shale fired brick production line with annual output of 1250 million bricks, designed by Xi'an Research and Design Institute of Wall and Roof Material, commissioned by QinDian Building Material Subcompany, and set an example for using fly ash and shale in China.

  10. Cadmium in insects after ash fertilization

    Institute of Scientific and Technical Information of China (English)

    Martin Lodenius; Jussi Josefsson; Kari Heli(o)vaara; Esa Tulisalo; Matti Nummelin


    Ash fertilization of forests returns nutrients to forest ecosystems and has a positive effect on soil pH.but it also may elevate Cd concentrations of forest biota.Cadmium concentrations of some forest insects(Formica ants.carabids and Coleopteran larvac from decaying wood)were investigated in southern Finland where two plots were fertilized with wood ash,while two other plots represented anfertilized control plots.In ants,mean Cd concentration was 3.6±1.4 mg/kg.with nest workers having significantly higher concen-trations than workers trapped in pitfall traps.Concentrations at fertilized and unfertilized plots were similar.In carabid beetles,the average Cd concentration of Carabus glabratus was 0.44±0.36 mg/kg.with no significant difference between control plots and fertilized plots.In another carabid beetle,Pterostichus niger,mean Cd concentration was higher at fertilized plots compared to control plots.We conclude that the variation of Cd concentra-tions in the insects studied is more efficiently controlled by species-specific differences than fertilization history of the forest floor.

  11. Mesoporous Silica from Rice Husk Ash

    Directory of Open Access Journals (Sweden)

    V.R. Shelke


    Full Text Available Mesoporous silica is used as a raw material in several areas: in preparation of catalysts, in inks, as a concrete hardening accelerator, as a component of detergents and soaps, as a refractory constituent etc. Sodium silicate is produced by reacting rice hull ash (RHA with aqueous NaOH and silica is precipitated from the sodium silicate by acidification. In the present work, conversion of about 90% of silica contained in RHA into sodium silicate was achieved in an open system at temperatures of about 100 °C. The results showed that silica obtained from RHA is mesoporous, has a large surface area and small particle size. Rice Husk is usually mixed with coal and this mixture is used for firing boilers. The RHA therefore, usually contains carbon particles. Activated carbon embedded on silica has been prepared using the carbon already present in RHA. This carbon shows good adsorption capacity. ©2010 BCREC UNDIP. All rights reserved(Received: 25th April 2010, Revised: 17th June 2010, Accepted: 24th June 2010[How to Cite: V.R. Shelke, S.S. Bhagade, S.A. Mandavgane. (2010. Mesoporous Silica from Rice Husk Ash. Bulletin of Chemical Reaction Engineering and Catalysis, 5 (2: 63-67. doi:10.9767/bcrec.5.2.793.63-67][DOI:

  12. Radioactive wastes dispersed in stabilized ash cements

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, J.B.; Taylor, C.M.V.; Sivils, L.D.; Carey, J.W.


    One of the most widely-used methods for the solidification/stabilization of low-level radwaste is by incorporation into Type-I/II ordinary portland cement (OPC). Treating of OPC with supercritical fluid carbon dioxide (SCCO{sub 2}) has been shown to significantly increase the density, while simultaneously decreasing porosity. In addition, the process significantly reduces the hydrogenous content, reducing the likelihood of radiolytic decomposition reactions. This, in turn, permits increased actinide loadings with a concomitant reduction in disposable waste volume. In this article, the authors discuss the combined use of fly-ash-modified OPC and its treatment with SCCO{sub 2} to further enhance immobilization properties. They begin with a brief summary of current cement immobilization technology in order to delineate the areas of concern. Next, supercritical fluids are described, as they relate to these areas of concern. In the subsequent section, they present an outline of results on the application of SCCO{sub 2} to OPC, and its effectiveness in addressing these problem areas. Lastly, in the final section, they proffer their thoughts on why they believe, based on the OPC results, that the incorporation of fly ash into OPC, followed by supercritical fluid treatment, can produce highly efficient wasteforms.

  13. Hot-Gas Filter Ash Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, M.L.; Hurley, J.P.; Dockter, B.A.; O`Keefe, C.A.


    Large-scale hot-gas filter testing over the past 10 years has revealed numerous cases of cake buildup on filter elements that has been difficult, if not impossible, to remove. At times, the cake can blind or bridge between candle filters, leading to filter failure. Physical factors, including particle-size distribution, particle shape, the aerodynamics of deposition, and system temperature, contribute to the difficulty in removing the cake, but chemical factors such as surface composition and gas-solid reactions also play roles in helping to bond the ash to the filters or to itself. This project is designed to perform the research necessary to determine the fuel-, sorbent-, and operations-related conditions that lead to blinding or bridging of hot-gas particle filters. The objectives of the project are threefold: (1) Determine the mechanisms by which a difficult-to-clean ash is formed and how it bridges hot-gas filters (2) Develop a method to determine the rate of bridging based on analyses of the feed coal and sorbent, filter properties, and system operating conditions and (3) Suggest and test ways to prevent filter bridging.

  14. Phosphorus Recovery from Ashes of Sewage Sludge

    Energy Technology Data Exchange (ETDEWEB)

    Cornel, Peter; Schaum, Peter


    About 90% of the incoming phosphorus load of waste water is eliminated by waste water treatment and transferred into the sewage sludge. Considerable amounts of sewage sludge can not be used agriculturally but are incinerated. Thus the ash from mono sludge incineration plants contains significant amounts of phosphorus (up to 25% P{sub 2}O{sub 5}) and could be used as raw material in fertilizer industry. The ash is hygienically harmless and free of organic substances. The ratio of phosphorus to heavy metals is basically the same as in the sewage sludge. The first step in separating phosphorus from heavy metals is to dissolve phosphorus by extraction. The most promising way seems to be the release of phosphorus with acids or bases. With 1 m sulphuric acid it is possible to release phosphorus completely. By use of acid most of the heavy metals dissolve, too. With caustic soda as solvent, only 30-40% of the phosphorus can be dissolved but the eluate is almost free of heavy metals. The amount of phosphorus which can be released with caustic soda, depends on the applied precipitant (Al or Fe salts) for phosphorus elimination at the waste water treatment. (author)

  15. ASH position paper: hypertension in pregnancy. (United States)

    Lindheimer, Marshall D; Taler, Sandra J; Cunningham, F Gary


    The American Society of Hypertension is publishing a series of Position Papers in their official journals throughout the 2008-2009 years. The following Position Paper originally appeared: JASH. 2008;2(6):484-494. Hypertension complicates 5% to 7% of all pregnancies. A subset of preeclampsia, characterized by new-onset hypertension, proteinuria, and multisystem involvement, is responsible for substantial maternal and fetal morbidity and is a marker for future cardiac and metabolic disease. This American Society of Hypertension, Inc (ASH) position paper summarizes the clinical spectrum of hypertension in pregnancy, focusing on preeclampsia. Recent research breakthroughs relating to etiology are briefly reviewed. Topics include classification of the different forms of hypertension during pregnancy, status of the tests available to predict preeclampsia, and strategies to prevent preeclampsia and to manage this serious disease. The use of antihypertensive drugs in pregnancy, and the prevention and treatment of the convulsive phase of preeclampsia, eclampsia, with intravenous magnesium sulfate is also highlighted. Of special note, this guideline article, specifically requested, reviewed, and accepted by ASH, includes solicited review advice from the American College of Obstetricians and Gynecologists.

  16. Fire severity effects on ash extractable Total Phosphorous (United States)

    Pereira, Paulo; Úbeda, Xavier; Martin, Deborah


    Phosphorous (P) is a crucial element to plant nutrition and limits vegetal production. The amounts of P in soil are lower and great part of this nutrient is absorbed or precipitated. It is well known that fire has important implications on P cycle, that can be lost throughout volatilization, evacuated with the smoke, but also more available to transport after organic matter mineralization imposed by the fire. The release of P depends on ash pH and their chemical and physical characteristics. Fire temperatures impose different severities, according to the specie affected and contact time. Fire severity is often evaluated by ash colour and this is a low-cost and excellent methodology to assess the fire effects on ecosystems. The aim of this work is study the ash properties physical and chemical properties on ash extractable Total Phosphorous (TP), collected in three wildfires, occured in Portugal, (named, (1) Quinta do Conde, (2) Quinta da Areia and (3) Casal do Sapo) composed mainly by Quercus suber and Pinus pinaster trees. The ash colour was assessed using the Munsell color chart. From all three plots we analyzed a total of 102 ash samples and we identified 5 different ash colours, ordered in an increasing order of severity, Very Dark Brown, Black, Dark Grey, Very Dark Grey and Light Grey. In order to observe significant differences between extractable TP and ash colours, we applied an ANOVA One Way test, and considered the differences significant at a p<0.05. The results showed that significant differences in the extractable TP among the different ash colours. Hence, to identify specific differences between each ash colour, we applied a post-hoc Fisher LSD test, significant at a p<0.05. The results obtained showed significant differences between the extractable TP from Very dark Brown and Black ash, produced at lower severities, in relation to Dark Grey, Very Dark Grey and Light Grey ash, generated at higher severities. The means of the first group were higher

  17. Electrical charging of ash in Icelandic volcanic plumes

    CERN Document Server

    Aplin, Karen L; Nicoll, Keri A


    The existence of volcanic lightning and alteration of the atmospheric potential gradient in the vicinity of near-vent volcanic plumes provides strong evidence for the charging of volcanic ash. More subtle electrical effects are also visible in balloon soundings of distal volcanic plumes. Near the vent, some proposed charging mechanisms are fractoemission, triboelectrification, and the so-called "dirty thunderstorm" mechanism, which is where ash and convective clouds interact electrically to enhance charging. Distant from the vent, a self-charging mechanism, probably triboelectrification, has been suggested to explain the sustained low levels of charge observed on a distal plume. Recent research by Houghton et al. (2013) linked the self-charging of volcanic ash to the properties of the particle size distribution, observing that a highly polydisperse ash distribution would charge more effectively than a monodisperse one. Natural radioactivity in some volcanic ash could also contribute to self-charging of volcan...


    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen


    The overall objective of the present project is to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific research issues to be addressed include: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity; and (3) the kinetics and mechanism of ash ozonation. This data will provide scientific and engineering support of the ongoing process development activities. During this fourth project period we completed the characterization of ozone-treated carbon surfaces and wrote a comprehensive report on the mechanism through which ozone suppresses the adsorption of concrete surfactants.

  19. Self-healing ability of fly ash-cement systems

    Energy Technology Data Exchange (ETDEWEB)

    Pipat Termkhajornkit; Toyoharu Nawa; Yoichi Yamashiro; Toshiki Saito [Lafarge Research Centre, Quentin Fallavier (France). Reactive Components Department


    Concrete is susceptible to cracking due to both autogenous and drying shrinkage. Nevertheless, most of these types of cracks occur before 28 days. Because fly ash continues to hydrate after 28 days, it is likely that hydrated products from fly ash may modify microstructure, seal these cracks, and prolong the service life. This research investigates the self-healing ability of fly ash-cement paste. Compressive strength, porosity, chloride diffusion coefficients, hydration reactions and hydrated products were studied. The research focuses on behavior after 28 days. According to the experimental results, the fly ash-cement system has the self-healing ability for cracks that occur from shrinkage. The self-healing ability increased when the fraction of fly ash increased.

  20. Activated blended cement containing high volume coal fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Shi, C.J.; Qian, J.S. [CJS Technology Inc., Burlington, ON (Canada)


    This study investigated the strength and equilibrium water extraction of blended cement containing high volume coal fly ash and activator CaCl{sub 2}. The addition of CaCl{sub 2} increased the strength of cement very significantly. Equilibrium water extraction indicated that the addition of CaCl{sub 2} decreased the pH of the pore solution, but accelerated the pozzolanic reactions between coal fly ash and lime, which became more obvious when the volume of fly ash in the cement was increased from 50-70%. Results from both strength and water extraction testing could conclude that CaCl{sub 2} is a good activator for the activation of pozzolanic reactivity of fly ash and for the improvement of early properties of fly ash cement and concrete.

  1. Synthesis and characterization of fly ash-zinc oxide nanocomposite

    Directory of Open Access Journals (Sweden)

    Kunal Yeole


    Full Text Available Fly ash, generated in thermal power plants, is recognized as an environmental pollutant. Thus, measures are required to be undertaken to dispose it in an environmentally friendly method. In this paper an attempt is made to coat zinc oxide nano-particles on the surface of fly ash by a simple and environmentally friendly facile chemical method, at room temperature. Zinc oxide may serve as effective corrosion inhibitor by providing sacrificial protection. Concentration of fly ash was varied as 5, 10 and 15 (w/w % of zinc oxide. It was found that crystallinity increased, whereas particle size, specific gravity and oil absorption value decreased with increased concentration of fly ash in zinc oxide, which is attributed to the uniform distribution of zinc oxide on the surface of fly ash. These nanocomposites can potentially be used in commercial applications as additive for anticorrosion coatings.

  2. Dry coal fly ash cleaning using rotary triboelectrostatic separator

    Institute of Scientific and Technical Information of China (English)

    TAO Daniel; FAN Mao-ming; JIANG Xin-kai


    More than 80 million metric tons of fly ash is produced annually in the U.S. As coal combustion by-product. Coal fly ash can be converted to value-added products if unburned carbon is reduced to less than 2.5%. However, most of fly ash is currently landfilled as waste due to lack of efficient purification technologies to separate unburned carbon from fly ash. A rotary triboelectrostatic separator has been developed and patented recently at the University of Kentucky with unique features. Several fly ash samples have been used to understand the effects of major process parameters on the separation performance. The results show that compared to existing triboelectrostatic separators, the rotary triboelectrostatic separator has significant advantages in particle charging efficiency, solids throughput, separation efficiency, applicable particle size range.

  3. Use of Recycled Aggregate and Fly Ash in Concrete Pavement

    Directory of Open Access Journals (Sweden)

    Myle N. James


    Full Text Available Problem statement: Recycled materials aggregate from the demolished concrete structures and fly ash from burning coal shows the possible application as structural and non structural components in concrete structures. This research aims to evaluate the feasibility of using concrete containing recycled concrete aggregate and fly ash in concrete pavement. Approach: Two water cement ratio (0.45 and 0.55 the compressive strength, modulus of electricity and flexural strength for concrete with recycled aggregate and fly ash with 0, 25% replacing cement in mass were considered. Results: The material properties of recycled aggregate concrete with fly ash indicate comparable results with that of concrete with natural aggregate and without fly ash. Conclusion/Recommendations: The recycled materials could be used in concrete pavement and it will promote the sustainability of concrete.

  4. Low temperature magnetic characterisation of fire ash residues (United States)

    Peters, C.; Thompson, R.; Harrison, A.; Church, M. J.

    Fire ash is ideally suited to mineral magnetic studies. Both modern (generated by controlled burning experiments) and archaeological ash deposits have been studied, with the aim of identifying and quantifying fuel types used in prehistory. Low temperature magnetic measurements were carried out on the ash samples using an MPMS 2 SQUID magnetometer. The low temperature thermo-remanence cooling curves of the modern ash display differences between fuel sources. Wood and well-humified peat ash display an increase in remanence with cooling probably related to a high superparamagnetic component, consistent with room temperature frequency dependent susceptibilities of over 7%. In comparison fibrous-upper peat and peat turf display an unusual decrease in remanence, possibly due to an isotropic point of grains larger than superparamagnetic in size. The differences have been successfully utilised in unmixing calculations to quantify fuel components within four archaeological deposits from the Northern and Western Isles of Scotland.

  5. Synthesis and characterization of zeolites prepared from industrial fly ash


    Franus, Wojciech; Wdowin, Magdalena; Franus, Małgorzata


    In this paper, we present the possibility of using fly ash to produce synthetic zeolites. The synthesis class F fly ash from the Stalowa Wola SA heat and power plant was subjected to 24 h hydrothermal reaction with sodium hydroxide. Depending on the reaction conditions, three types of synthetic zeolites were formed: Na-X (20 g fly ash, 0.5 dm3 of 3 mol · dm−3 NaOH, 75 °C), Na-P1 (20 g fly ash, 0.5 dm3 of 3 mol · dm−3 NaOH, 95 °C), and sodalite (20 g fly ash, 0.8 dm3 of 5 mol · dm−3 NaOH + 0.4...

  6. Analysis list: ash-2 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ash-2 Adult,Embryo + ce10,, ...


    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen


    The overall objective of the present project is to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific research issues to be addressed include: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity; and (3) the kinetics and mechanism of ash ozonation. This data will provide scientific and engineering support of the ongoing process development activities. During this fourth project period we completed the characterization of ozone-treated carbon surfaces and wrote a comprehensive report on the mechanism through which ozone suppresses the adsorption of concrete surfactants.

  8. Application of Fly Ash from Solid Fuel Combustion in Concrete

    DEFF Research Database (Denmark)

    Pedersen, Kim Hougaard


    reactor to test the impact of changes in operating conditions and fuel type on the AEA adsorption of ash and NOx formation. Increased oxidizing conditions, obtained by improved fuel-air mixing or higher excess air, decreased the AEA requirements of the produced ash by up to a factor of 25. This was due...... on a carbon black. The reactor was modeled with CFD and a relationship between oxygen concentration in the early stage of combustion and the AEA adsorption properties of the ash was observed. The NOx formation increased by up to three times with more oxidizing conditions and thus, there was a trade....... The AEA requirements of a fly ash can be suppressed by exposing it to oxidizing species, which oxidizes the carbon surface and thus prevents the AEA to be adsorbed. In the present work, two fly ashes have been ozonated in a fixed bed reactor and the results showed that ozonation is a potential post...

  9. Analysis of Content of Selected Critical Elements in Fly Ash

    Directory of Open Access Journals (Sweden)

    Makowska Dorota


    Full Text Available Pursuant to the new mineral policy of the European Union, searching for new sources of raw materials is required. Coal fly ash has long been considered as a potential source of a number of critical elements. Therefore, it is important to monitor the contents of the critical elements in fly ash from coal combustion. The paper presents the results of examinations of the contents of selected elements, i.e. beryllium, cobalt, chromium and germanium in fly ash from Polish power plants. The results of the conducted investigations indicate that the examined ash samples from bituminous coal combustion cannot be treated as a potential source of the analysed critical elements. The content of these elements in ash, though slightly higher than their average content in the sedimentary rocks, is, however, not high enough to make their recovery technologically and economically justified at this moment.

  10. Feasibility study on solidification of municipal solid waste incinerator fly ash with circulating fluidized bed combustion coal fly ash. (United States)

    Liu, Wenshi; Hou, Haobo; Zhang, Chuhao; Zhang, Dajie


    The objective of this study was to assess the feasibility of solidification of municipal solid waste incinerator (MSWI) fly ash with circulation fluidized bed combustion (CFBC) fly ash, which is unsuitable as a cement replacement due to its high amounts of carbon, lime and anhydrite. The solidification process was conducted on samples prepared from MSWI fly ash, binders (cement clinkers and CFBC fly ash were mixed at two replacement ratios) and water (water/solid weight ratio = 0.4), among which the MSWI fly ash replaced each binder at the ratio of 0, 20, 40, 60 and 80% by dry weight. The samples were subjected to compressive strength tests and Toxicity Characteristic Leaching Procedure and the results showed that all solidified MSWI fly ash can meet the landfill standard imposed by US EPA after 28 days of curing. Micro-analysis (X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectrophotometry) revealed that the main hydrate products were C-S-H gel and ettringite, which have a positive effect on heavy metals retention. Therefore, this method provides a possibility to achieve a cheap and effective solution for MSWI fly ash management and use for CFBC fly ash.

  11. Fluidization characteristics of power-plant fly ashes and fly ash-charcoal mixtures. [MS Thesis; 40 references

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, C.T.


    As a part of the continuing research on aluminum recovery from fly ash by HiChlor process, a plexiglass fluidization column system was constructed for measurement of fluidization parameters for power-plant fly ashes and fly ash-charcoal mixtures. Several bituminous and subbituminous coal fly ashes were tested and large differences in fluidization characteristics were observed. Fly ashes which were mechanically collected fluidized uniformly at low gas flow rates. Most fly ashes which were electrostatically precipitated exhibited channeling tendency and did not fluidize uniformly. Fluidization characteristics of electrostatically collected ashes improve when the finely divided charcoal powder is added to the mixture. The fluidization of the mixture was aided initially by a mechanical stirrer. Once the fluidization had succeeded, the beds were ready to fluidize without the assistance of a mechanical action. Smooth fluidization and large bed expansion were usually observed. The effects of charcoal size and aspect ratio on fluidization characteristics of the mixtures were also investigated. Fluidization characteristics of a fly ash-coal mixture were tested. The mixture fluidized only after being oven-dried for a few days.

  12. Gas/aerosol-ash interaction in volcanic plumes: New insights from surface analyses of fine ash particles (United States)

    Delmelle, Pierre; Lambert, Mathieu; Dufrêne, Yves; Gerin, Patrick; Óskarsson, Niels


    The reactions occurring between gases/aerosols and silicate ash particles in volcanic eruption plumes remain poorly understood, despite the fact that they are at the origin of a range of volcanic, environmental, atmospheric and health effects. In this study, we apply X-ray photoelectron spectroscopy (XPS), a surface-sensitive technique, to determine the chemical composition of the near-surface region (2-10 nm) of nine ash samples collected from eight volcanoes. In addition, atomic force microscopy (AFM) is used to image the nanometer-scale surface structure of individual ash particles isolated from three samples. We demonstrate that rapid acid dissolution of ash occurs within eruption plumes. This process is favoured by the presence of fluoride and is believed to supply the cations involved in the deposition of sulphate and halide salts onto ash. AFM imaging also has permitted the detection of extremely thin (< 10 nm) coatings on the surface of ash. This material is probably composed of soluble sulphate and halide salts mixed with sparingly soluble fluoride compounds. The surface approach developed here offers promising aspects for better appraising the role of gas/aerosol-ash interaction in dictating the ability of ash to act as sinks for various volcanic and atmospheric chemical species as well as sources for others.

  13. Ash and heavy metals in fluidized bed-combustion; Tuhka ja raskasmetallit puuperaeisen jaetteen kerrosleijupoltossa

    Energy Technology Data Exchange (ETDEWEB)

    Kaessi, T.; Aittoniemi, P. [IVO International, Vantaa (Finland)


    Combustion ashes and submicron fly ash particles were characterized in two industrial boilers (bubbling vs. circulating fluidized bed) burning paper mill deinking sludge and bark or wood as support fuel. Bulk samples from fly ash, circulating ash and bottom ash were analyzed. Fine particles in fly ash were monitored and sampled for microscopic studies. The mass size distribution of fly ash was measured and the chemical composition according to particle size was analyzed. The results showed that ash consists of large and friable clusters formed by sintering of small mineral particles originating from paper fillers. Very few ash particles were fused and they were found only among the smallest particles. No agglomerates of fused particles were found. If the residence time in furnace is long enough sintering may proceed further and ash structure grows more dense. No indication of ash vaporization was detected. These results were similar for bubbling and circulating fluidized bed boilers. (author)

  14. Wildfire Ash: Chemical Composition, Ash-Soil Interactions and Environmental Impacts (United States)

    Brook, Anna; Hamzi, Seham; Wittenberg, Lea


    Of the five classical factors of soil formation, climate, parent material, topography, time, organisms, and recently recognized human activity, it is the latter factor which discretely includes fire and post-burn impact. However, it is considered that soil undergoing fire just experience a temporary removal of the top organic horizon, thus slightly modified and often labeled as 'temporarily disturbed' soil or soil 'under restoration/rehabilitation'. In fact the suggested seventh factor, post-burned produced ash, can act both dependently and independently of the other soil forming factors (Levin et al., 2013; Certini 2013). They are interdependent in cases where ash influences occur on time scales similar to 'natural' soil formation (Keesstra et ai., 2014) such as changes in vegetation. On the other hand, in post-fire areas a strong dependency is expected between soil-water retention mechanism, climate and topography. Wild-land fires exert many changes on the physical, chemical, mineralogical, biological, and morphological properties of soil that, in turn, affect the soil's hydrology and nutrient flux, modifying its ability to support vegetation and resist erosion. The ash produced by forest fires is a complex mixture composed of organic and inorganic particles characterized by vary physical-chemical and morphological properties. The importance of this study is straightforwardly related to the frequency and large-scales wildfires in Mediterranean region. In fact, wildfires are major environmental and land management concern in the world, where the number and severity of wildfires has increased during the past decades (Bodi, 2013). Certini (2013) assumed that cumulatively all of the vegetated land is burned in about 31 years annually affecting 330-430 Mha (over 3% of the Earth's surface) and wide range of land cover types worldwide including forests, peatlands, shrublands and grasslands. Whereas, the fire is identified as an important factor in soil formation, the

  15. Effect of fuel properties on the bottom ash generation rate by a laboratory fluidized bed combustor

    Energy Technology Data Exchange (ETDEWEB)

    Rozelle, P.L.; Pisupati, S.V.; Scaroni, A.W. [Penn State University, University Park, PA (United States). Dept. of Energy & Geoenvironmental Engineering


    The range of fuels that can be accommodated by an FBC boiler system is affected by the ability of the fuel, sorbent, and ash-handling equipment to move the required solids through the boiler. Of specific interest is the bottom ash handling equipment, which must have sufficient capacity to remove ash from the system in order to maintain a constant bed inventory level, and must have sufficient capability to cool the ash well below the bed temperature. Quantification of a fuel's bottom ash removal requirements can be useful for plant design. The effect of fuel properties on the rate of bottom ash production in a laboratory FBC test system was examined. The work used coal products ranging in ash content from 20 to 40+ wt. %. The system's classification of solids by particle size into flyash and bottom ash was characterized using a partition curve. Fuel fractions in the size range characteristic of bottom ash were further analyzed for distributions of ash content with respect to specific gravity, using float sink tests. The fuel fractions were then ashed in a fixed bed. In each case, the highest ash content fraction produced ash with the coarsest size consist (characteristic of bottom ash). The lower ash content fractions were found to produce ash in the size range characteristic of flyash, suggesting that the high ash content fractions were largely responsible for the production of bottom ash. The contributions of the specific gravity fractions to the composite ash in the fuels were quantified. The fuels were fired in the laboratory test system. Fuels with higher amounts of high specific gravity particles, in the size ranges characteristic of bottom ash, were found to produce more bottom ash, indicating the potential utility of float sink methods in the prediction of bottom ash removal requirements.

  16. Effect of particle volume fraction on the settling velocity of volcanic ash particles: implications for ash dispersion models (United States)

    Del Bello, E.; Taddeucci, J.; De'Michieli Vitturi, M.; Scarlato, P.; Andronico, D.; Scollo, S.; Kueppers, U.


    We present the first report of experimental measurements of the enhanced settling velocity of volcanic particles as function of particle volume fraction. In order to investigate the differences in the aerodynamic behavior of ash particles when settling individually or in mass, we performed systematic large-scale ash settling experiments using natural basaltic and phonolitic ash. By releasing ash particles at different, controlled volumetric flow rates, in an unconstrained open space and at minimal air movement, we measured their terminal velocity, size, and particle volume fraction with a high-speed camera at 2000 fps. Enhanced settling velocities of individual particles increase with increasing particle volume fraction. This suggests that particle clustering during fallout may be one reason explaining larger than theoretical depletion rates of fine particles from volcanic ash clouds. We provide a quantitative empirical model that allows to calculate, from a given particle size and density, the enhanced velocity resulting from a given particle volume fraction. The proposed model has the potential to serve as a simple tool for the prediction of the terminal velocity of ash of an hypothetical distribution of ash of known particle size and volume fraction. This is of particular importance for advection-diffusion transport model of ash where generally a one-way coupling is adopted, considering only the flow effects on particles. To better quantify the importance of the enhanced settling velocity in ash dispersal, we finally introduced the new formulation in a Lagrangian model calculating for realistic eruptive conditions the resulting ash concentration in the atmosphere and on the ground.

  17. Estimation of ash recirculation effect upon ash collector efficiency by the example of a TsBR-150U-1280 multicyclone collector (United States)

    Elsukov, V. K.; Latushkina, S. V.


    Problems of the mathematical estimation of the amount of recirculating ash and its effect upon the efficiency of gas treating within ash collectors with the scroll and semiscroll gas supply, which are equipped by a gas and ash recirculation system, are considered. Based on the analysis of various publications and operational experience, a conclusion is drawn regarding the complex and substantial effect of the recirculation system upon the ash collector efficiency. The following research tasks are posed: computational determination of ash weight at the ash collector inlet subject to its recirculation, development of measures for enhancement of the ash collector, and estimation of these measures. A computation procedure for consumption of recirculating ash in the ash collector and its sections with the use of formulas of the geometrical progression is represented. Based on the represented procedure as applied to a TsBR-150U-1280 multicyclone collector collecting ash of coal of an Irsha-Borodinsk coalfield, corresponding ash consumptions are determined, including that at which the effective operation of the ash collector is provided. Various variants of the modernization of the mentioned multicyclone collector are developed and estimated. Conclusions are drawn regarding the necessity for further investigations for improvement of the represented procedure, in particular, the effect of the gas speed (boiler load) upon the efficiency of various ash collector units, recirculating ash consumption, and clogging their cyclone units.

  18. Binary effect of fly ash and palm oil fuel ash on heat of hydration aerated concrete. (United States)

    Mehmannavaz, Taha; Ismail, Mohammad; Radin Sumadi, Salihuddin; Rafique Bhutta, Muhammad Aamer; Samadi, Mostafa; Sajjadi, Seyed Mahdi


    The binary effect of pulverized fuel ash (PFA) and palm oil fuel ash (POFA) on heat of hydration of aerated concrete was studied. Three aerated concrete mixes were prepared, namely, concrete containing 100% ordinary Portland cement (control sample or Type I), binary concrete made from 50% POFA (Type II), and ternary concrete containing 30% POFA and 20% PFA (Type III). It is found that the temperature increases due to heat of hydration through all the concrete specimens especially in the control sample. However, the total temperature rises caused by the heat of hydration through both of the new binary and ternary concrete were significantly lower than the control sample. The obtained results reveal that the replacement of Portland cement with binary and ternary materials is beneficial, particularly for mass concrete where thermal cracking due to extreme heat rise is of great concern.

  19. Synthesis and characterization of geopolymer from bottom ash and rice husk ash (United States)

    Anggarini, Ufafa; Sukmana, Ndaru C.


    All Geopolymer (GP) has been synthesized from bottom ash and rice husk ash. This research aims to determine the effect of Si/Al ratio on geopolymer synthesis. Geopolymer was synthesized with various Si/Al ratio of 2, 3 and 4. The characterization result using XRD and SEM indicated that by using a different ratio of Si/A, it will produce geopolymer with varied structure and morphology. Diffractogram result shows that polymerization has been done for all samples (GP2, GP3, Gp4) with the presence of hump peak at 2θ = 27-35°. In GP4, no peak at 2θ = 18° indicating sodalite phase forming. Besides that, the morphology of geopolymer with a varied ratio of Si/Al shows that higher ratio will produce geopolymer with higher particle size. The highest compressive strength of geopolymer was obtained at a ratio of Si/Al = 4, with a maximum load of 12866 kgf.

  20. Impact of tree species on soil carbon stocks and soil acidity in southern Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Oostra, Swantje [Swedish Univ. of Agricultural Sciences, Alnarp (Sweden). Dept. of Landscape Planning; Majdi, Hooshang [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Ecology and Environmental Sciences; Olsson, Mats [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest Soils


    The impact of tree species on soil carbon stocks and acidity in southern Sweden was studied in a non-replicated plantation with monocultures of 67-year-old ash (Fraxinus excelsior L.), beech (Fagus silvatica L.), elm (Ulmus glabra Huds.), hornbeam (Carpinusbetulus L.), Norway spruce (Picea abies L.) and oak (Quercus robur L.). The site was characterized by a cambisol on glacial till. Volume-determined soil samples were taken from the O-horizon and mineral soil layers to 20 cm. Soil organic carbon (SOC), total nitrogen (TN), pH (H2O), cation-exchange capacity and base saturation at pH 7 and exchangeable calcium, magnesium, potassium and sodium ions were analysed in the soil fraction < 2 mm. Root biomass <5 mm in diameter) and its proportion in the forest floor and mineral soil varied between tree species. There was a vertical gradient under all species, with the highest concentrations of SOC, TN and base cations in the O-horizon and the lowest in the 10-20 cm layer. The tree species differed with respect to SOC, TN and soil acidity in the O-horizon and mineral soil. For SOC and TN, the range in the O-horizon was spruce> hornbeam > oak > beech > ash > elm. The pH in the O-horizon ranged in the order elm > ash > hornbeam > beech > oak > spruce. In the mineral soil, SOC and TN ranged in the order elm > oak > ash = hornbeam > spruce > beech, i.e. partly reversed, and pH ranged in the same order as for the O-horizon. It is suggested that spruce is the best option for fertile sites in southern Sweden if the aim is a high carbon sequestration rate, whereas elm, ash and hornbeam are the best solutions if the aim is a low soil acidification rate.

  1. Properties of Concrete using Tanjung Bin Power Plant Coal Bottom Ash and Fly Ash

    Directory of Open Access Journals (Sweden)

    Abdulhameed Umar Abubakar


    Full Text Available Coal combustion by-products (CCPs have been around since man understood that burning coal generates electricity, and its utilization in concrete production for nearly a century. The concept of sustainable development only reawaken our consciousness to the huge amount of CCPs around us and the need for proper reutilization than the current method of disposal which has  severe consequences both to man and the environment. This paper presents the result of utilization of waste from thermal power plants to improve some engineering properties of concrete. Coal bottom ash (CBA and fly ash were utilized in partial replacement for fine aggregates and cement respectively. The results of compressive strength at 7, 28, 56 & 90 days curing are presented because of the pozzolanic reaction. Other properties investigated include physical properties, fresh concrete properties and density. The results showed that for a grade 35 concrete with a combination of CBA and fly ash can produce 28 day strength above 30 MPa.

  2. Estimation of Volcanic Ash Plume Top Height using AATSR (United States)

    Virtanen, Timo; Kolmonen, Pekka; Sogacheva, Larisa; Sundström, Anu-Maija; Rodriguez, Edith; de Leeuw, Gerrit


    The AATSR Correlation Method (ACM) height estimation algorithm is presented. The algorithm uses Advanced Along Track Scanning Radiometer (AATSR) satellite data to detect volcanic ash plumes and to estimate the plume top height. The height estimate is based on the stereo-viewing capability of the AATSR instrument, which allows to determine the parallax between the satellite's 55° forward and nadir views, and thus the corresponding height. Besides the stereo view, AATSR provides another advantage compared to other satellite based instruments. With AATSR it is possible to detect ash plumes using brightness temperature difference between thermal infrared (TIR) channels centered at 11 and 12 µm. The automatic ash detection makes the algorithm efficient in processing large quantities of data: the height estimate is calculated only for the ash-flagged pixels. In addition, it is possible to study the effect of using different wavelengths in the height estimate, ranging from visible (555 nm) to thermal infrared (12 µm). The ACM algorithm can be applied to the Sea and Land Surface Temperature Radiometer (SLSTR), scheduled for launch at the end of 2015. Accurate information on the volcanic ash position is important for air traffic safety. The ACM algorithm can provide valuable data of both horizontal and vertical ash dispersion. These data may be useful for comparisons with existing volcanic ash dispersion models and retrieval methods. We present ACM plume top height estimate results for the Eyjafjallajökull eruption, and comparisons against available ground based and satellite observations.

  3. Phenolic acids as bioindicators of fly ash deposit revegetation

    Energy Technology Data Exchange (ETDEWEB)

    L. Djurdjevic; M. Mitrovic; P. Pavlovic; G. Gajic; O. Kostic [Institute for Biological Research ' Sinisa Stankovic,' Belgrade (Serbia and Montenegro). Department of Ecology


    The floristic composition, the abundance, and the cover of pioneer plant species of spontaneously formed plant communities and the content of total phenolics and phenolic acids, as humus constituents, of an ash deposit after 7 years of recultivation were studied. The restoration of both the soil and the vegetation on the ash deposits of the 'Nikola Tesla-A' thermoelectric power plant in Obrenovac (Serbia) is an extremely slow process. Unfavorable physical and chemical characteristics, the toxicity of fly ash, and extreme microclimatic conditions prevented the development of compact plant cover. The abundance and cover of plants increased from the central part of the deposit towards its edges. Festuca rubra L., Crepis setosa Hall., Erigeron canadensis L., Cirsium arvense (L.) Scop., Calamagrostis epigeios (L.) Roth., and Tamarix gallica L. were the most abundant species, thus giving the highest cover. Humus generated during the decomposition process of plant remains represents a completely new product absent in the ash as the starting material. The amount of total phenolics and phenolic acids in fly ash increased from the center of the deposit towards its edges in correlation with the increase in plant abundance and cover. The presence of phenolic acids indicates the ongoing process of humus formation in the ash, in which the most abundant pioneer plants of spontaneously formed plant communities play the main role. Phenolic compounds can serve as reliable bioindicators in an assessment of the success of the recultivation process of thermoelectric power plants' ash deposits.

  4. Size distribution of rare earth elements in coal ash (United States)

    Scott, Clinton T.; Deonarine, Amrika; Kolker, Allan; Adams, Monique; Holland, James F.


    Rare earth elements (REEs) are utilized in various applications that are vital to the automotive, petrochemical, medical, and information technology industries. As world demand for REEs increases, critical shortages are expected. Due to the retention of REEs during coal combustion, coal fly ash is increasingly considered a potential resource. Previous studies have demonstrated that coal fly ash is variably enriched in REEs relative to feed coal (e.g, Seredin and Dai, 2012) and that enrichment increases with decreasing size fractions (Blissett et al., 2014). In order to further explore the REE resource potential of coal ash, and determine the partitioning behavior of REE as a function of grain size, we studied whole coal and fly ash size-fractions collected from three U.S commercial-scale coal-fired generating stations burning Appalachian or Powder River Basin coal. Whole fly ash was separated into , 5 um, to 5 to 10 um and 10 to 100 um particle size fractions by mechanical shaking using trace-metal clean procedures. In these samples REE enrichments in whole fly ash ranges 5.6 to 18.5 times that of feedcoals. Partitioning results for size separates relative to whole coal and whole fly ash will also be reported. 

  5. Thermal behaviour of ESP ash from municipal solid waste incinerators. (United States)

    Yang, Y; Xiao, Y; Wilson, N; Voncken, J H L


    Stricter environmental regulations demand safer treatment and disposal of incinerator fly ashes. So far no sound technology or a process is available for a sustainable and ecological treatment of the waste incineration ashes, and only partial treatment is practised for temporary and short-term solutions. New processes and technology need to be developed for comprehensive utilization and detoxification of the municipal solid waste (MSW) incinerator residues. To explore the efficiency of thermal stabilisation and controlled vitrification, the thermal behaviour of electrostatic precipitator (ESP) ash was investigated under controlled conditions. The reaction stages are identified with the initial moisture removal, volatilization, melting and slag formation. At the temperature higher than 1100 degrees C, the ESP ashes have a quicker weight loss, and the total weight loss reaches up to 52%, higher than the boiler ash. At 1400 degrees C a salt layer and a homogeneous glassy slag were formed. The effect of thermal treatment on the leaching characteristics of various elements in the ESP ash was evaluated with the availability-leaching test. The leaching values of the vitrified slag are significantly lowered than that of the original ash.

  6. Creep Behaviour of Fly Ash-Based Geopolymer Concrete

    Directory of Open Access Journals (Sweden)

    Wallah S.E.


    Full Text Available Fly ash-based geopolymer concrete is manufactured using fly ash as its source material and does not use Portland cement at all. Beside fly ash, alkaline solution is also utilized to make geopolymer paste which binds the aggregates to form geopolymer concrete. This paper presents the study of creep behaviour of fly ash-based geopolymer concrete. Four series of specimens with various compressive strengths were prepared to study its creep behaviour for the duration of test up to one year. The test method followed the procedures applied for Ordinary Portland Cement (OPC concrete. Test results show that fly ash-based geopolymer concrete undergoes low creep which is generally less than that of OPC concrete. After one year of loading, the results for specific creep of fly ash-based geopolymer concrete in this study ranges from 15 to 29 microstrain for concrete compressive strength 67–40 MPa respectively. From the test results, it is also found out that the creep coefficient of fly ash-based geopolymer concrete is about half of that predicted using Gilbert’s Method for OPC concrete.

  7. Behaviour of peat ash in high-temperature processes

    Energy Technology Data Exchange (ETDEWEB)

    Moilanen, A.


    The ash-forming constituents are in peat as minerals and bound in the organic framework. The kind of binding is dependent on peat type, plant species composition, acidity of the peatland, etc. Studies carried out with brown coal have indicated that the forms of ash occurrence in the fuel have an influence on the slagging ehaviour of ash in the process. The behaviour is also dependent on the reactor type and conditions in the reactor, for example, on the composition of gas atmosphere, on temperature, and gas flows. For example, the reducing conditions affect especially the occurrence of iron in different oxidation degrees in gasification, and this affects further the melting behaviour of ash. In brown coal gasification, as much as a third of the iron content was found to be reduced to metallic iron in the fluid-bed gasifier. To forecast the slagging behaviour of ash, the melting temperatures of ash are measured. Fouling or partial melting of ash cannot always be monitored with standard measuring methods, as these phenomena may start already at temperatures 200 deg C lower than the lowest melting temperature. THey can be studied for example with thermochemical methods.

  8. Mutagenicity and genotoxicity of coal fly ash water leachate

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, R.; Mukherjee, A. [University of Calcutta, Calcutta (India). Dept. of Botany


    Fly ash is a by-product of coal-fired electricity generation plants. The prevalent practice of disposal is as slurry of ash and water to storage or ash ponds located near power stations. This has lain to waste thousands of hectares of land all over the world. Since leaching is often the cause of off-site contamination and pathway of introduction into the human environment, a study on the genotoxic effects of fly ash leachate is essential. Leachate prepared from the fly ash sample was analyzed for metal content, and tested for mutagenicity and genotoxicity. Analyses of metals show predominance of the metals - sodium, silicon, potassium, calcium, magnesium, iron, manganese, zinc, and sulphate. The Ames Salmonella mutagenicity assay, a short-term bacterial reverse mutation assay, was conducted on two-tester strains of Salmonella typhimurium strains TA97a and TA102. For genotoxicity, the alkaline version of comet assay on fly ash leachate was carried in vitro on human blood cells and in vivo on Nicotiana plants. The leachate was directly mutagenic and induced significantconcentration-dependent increases in DNA damage in whole blood cells, lymphocytes, and in Nicotiana plants. The comet parameters show increases in tail DNA percentage (%), tail length (mu m), and olive tail moment (arbitrary units). Our results indicate that leachate from fly ash dumpsites has the genotoxic potential and may lead to adverse effects on vegetation and on the health of exposed human populations.

  9. Modeling transport and aggregation of volcanic ash particles (United States)

    Costa, Antonio; Folch, Arnau; Macedonio, Giovanni; Durant, Adam


    A complete description of ash aggregation processes in volcanic clouds is an very arduous task and the full coupling of ash transport and ash aggregation models is still computationally prohibitive. A large fraction of fine ash injected in the atmosphere during explosive eruptions aggregate because of complex interactions of surface liquid layers, electrostatic forces, and differences in settling velocities. The formation of aggregates of size and density different from those of the primary particles dramatically changes the sedimentation dynamics and results in lower atmospheric residence times of ash particles and in the formation of secondary maxima of tephra deposit. Volcanic ash transport models should include a full aggregation model accounting for all particle class interaction. However this approach would require prohibitive computational times. Here we present a simplified model for wet aggregation that accounts for both atmospheric and volcanic water transport. The aggregation model assumes a fractal relationship for the number of primary particles in aggregates, average efficiencies factors, and collision frequency functions accounting for Brownian motion, laminar and turbulent fluid shear, and differential settling velocity. We implemented the aggregation model in the WRF+FALL3D coupled modelling system and applied it to different eruptions where aggregation has been recognized to play an important role, such as the August and September 1992 Crater Peak eruptions and the 1980 Mt St Helens eruption. Moreover, understanding aggregation processes in volcanic clouds will contribute to mitigate the risks related with volcanic ash transport and sedimentation.

  10. Stabilization of Expansive Soil by Lime and Fly Ash

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ji-ru; CAO Xing


    An experimental program was undertaken to study the individual and admixed effects of lime and fly ash on the geotechnical characteristics of expansive soil. Lime and fly ash were added to the expansive soil at 4% -6% and 40% - 50% by dry weight of soil, respectively. Testing specimens were determined and examined in chemical composition, grain size distribution, consistency limits, compaction, CBR ,free swell and swell capacity. The effect of lime and fly ash addition on reducing the swelling potential of an expansive soil is presented.It is revealed that a change of expansive soil texture takes place when lime and fly ash are mixed with expansive soil. Plastic limit increases by mixing lime and liquid limit decreases by mixing fly ash, which decreases plasticity index. As the amount of lime and fly ash is increased, there are an apparent reduction in maximum dry density,free swell and swelling capacity under 50 kPa pressure, and a corresponding increase in the percentage of coarse particles, optimum moisture content and CBR value. Based on the results, it can be concluded that the expansive soil can be successfully stabilized by lime and fly ash.

  11. Carbonatation Influence on Fly Ash and Portland Cement Mortars

    Directory of Open Access Journals (Sweden)

    P.L. Valdez–Tamez


    Full Text Available The influence of carbonation on mortars containing 25% of fly ash instead of the cementitious materials was studied. Mortar cylinder specimens were fabricated for 4 different W/C ratios: 0.35, 0.45, 0.55 and 0.65. Mortars with and without fly ash were subjected to an accelerated carbonation process. Volumetric weight, water absorption, compressive strength, water permeability, pH and mercury intrusion porosimetry of the mortar specimens were determined. Due to the fly ash pozzolanic potential, for all W/C ratios, results of the compressive strength tests at 28 days of the mortars with and without fly ash were similar. Mortars with fly ash presented similar water permeability as mortars without fly ash. PH results showed that alkalinity reduction is lower in mortars with fly ash compared to those containing cement only. In all the mortars, the porosimetric analysis indicated that porosity is reduced due to carbonation. Further more, it is showed the predominance of the macro and mesopores.

  12. Zeolite from fly ash: synthesis and characterization

    Indian Academy of Sciences (India)

    Keka Ojha; Narayan C Pradhan; Amar Nath Samanta


    Coal fly ash was used to synthesize X-type zeolite by alkali fusion followed by hydrothermal treatment. The synthesized zeolite was characterized using various techniques such as X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, BET method for surface area measurement etc. The synthesis conditions were optimized to obtain highly crystalline zeolite with maximum BET surface area. The maximum surface area of the product was found to be 383 m2/g with high purity. The crystallinity of the prepared zeolite was found to change with fusion temperature and a maximum value was obtained at 823 K. The cost of synthesized zeolite was estimated to be almost one-fifth of that of commercial 13X zeolite available in the market.

  13. Fly ash for durable concrete construction

    Energy Technology Data Exchange (ETDEWEB)

    Dhir, R.K. [University of Dundee, Dundee (United Kingdom). Dept. of Civil Engineering


    This is essentially a review paper, bringing together the various studies undertaken at the University of Dundee as well as many others selected from published work. A full range of durability properties have been considered dealing with the effects of fly ash (FA) in concrete. It is shown that the use of FA generally effects improvement in the resistance of concrete to various forms of attack. FA is shown to greatly improve concrete resistance to chloride ingress and to reduce expansion caused by ASR. In the case of sulphate attack the use of FA is recommended. With regard to carbonation, FA can slightly reduce the resistance. It is also shown that FA concrete will benefit more from curing than OPC concrete in developing its resistance to deterioration with age. 78 refs., 8 figs., 5 tabs.

  14. Scrap tire ashes in portland cement production

    Directory of Open Access Journals (Sweden)

    Mónica Adriana Trezza


    Full Text Available Scrap tires are not considered harmful waste, but their stocking and disposal are a potential health and environmental risk. Properly controlled calcinations at high temperatures make tire combustion an interesting alternative due to its high calorific power, comparable to that of fuel-oil. Consequently, using them as an alternative combustible material in cement kilns makes it possible to give it a valuable use. However, it remains to be assured whether the impurities added to the clinker through these fuels do not affect its structure or properties.This paper shows the studies carried out on different clinkers under laboratory conditions with different levels of addition of scrap tire ashes, added by partially replacing traditional fuel in cement kilns.

  15. Concrete with Highly Active Rice Husk Ash

    Institute of Scientific and Technical Information of China (English)

    FENG Qing-ge; LIN Qing-yu; YU Qi-jun; ZHAO San-ying; YANG Lu-feng; Shuichi Sugita


    The overall aim was to investigate the effect of highly active rice husk ash (RHA) produced by an industrial furnace on some properties of concrete. The strength, pore volume and pore distribution of concrete and the Ca(OH)2 content in concrete were investigated by JIS A 1108 (Method of test for compressive strength of concrete), a mercury instrument porosimeter, and the thermogravimetric analysis, respectively. The results show that,with RHA replacement of cement,the compressive strength of concrete is increased evidently;the average pore radius of concrete is greatly decreased, especially the portion of the pores greater than 20nm in radius is decreased while the amount of smaller pores is increased, and the more the RHA replacement, the less the amount of Ca(OH)2 in concrete. The latter two results are the main reasons for the strength enhancement of concrete.

  16. Effective use of fly ash slurry as fill material. (United States)

    Horiuchi, S; Kawaguchi, M; Yasuhara, K


    A lot of effort has been put into increasing coal ash utilization; however, 50% of total amount is disposed of on land and in the sea. Several attempts have been reported recently concerning slurried coal fly ash use for civil engineering materials, such as for structural fill and backfill. The authors have studied this issue for more than 15 years and reported its potential for (1) underwater fills, (2) light weight backfills, and (3) light weight structural fills, through both laboratory tests and construction works. This paper is an overview of the results obtained for slurry, focusing on the following. (1) Coal fly ash reclaimed by slurry placement shows lower compressibility, higher ground density, and higher strength than by the other methods. This higher strength increases stability against liquefaction during earthquake. (2) Higher stability of the fly ash ground formed by slurry placement is caused by higher density and its self-hardening property. (3) Stability of fly ash reclaimed ground can be increased by increasing density and also by strength enhancement by cement addition. (4) Technical data obtained through a man-made island construction project shows the advantages of fly ash slurry in terms of mechanical properties such as higher stability against sliding failure, sufficient ground strength, and also in terms of cost saving. (5) Concentration in leachates from the placed slurry is lower than the Japanese environmental law. (6) In order to enlarge the fly ash slurry application toward a lightweight fill, mixtures of air foam, cement and fly ash were examined. Test results shows sufficient durability of this material against creep failure. This material was then used as lightweight structural fill around a high-rise building, and showed sufficient quality. From the above data, it can be concluded that coal fly ash slurry can be effectively utilized in civil engineering projects.

  17. Ash formation, deposition, corrosion, and erosion in conventional boilers

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.A.; Jones, M.L. [Univ. of North Dakota, Grand Forks, ND (United States)


    The inorganic components (ash-forming species) associated with coals significantly affect boiler design, efficiency of operation, and lifetimes of boiler parts. During combustion in conventional pulverized fuel boilers, the inorganic components are transformed into inorganic gases, liquids, and solids. This partitioning depends upon the association of the inorganic components in the coal and combustion conditions. The inorganic components are associated as mineral grains and as organically associated elements, and these associations of inorganic components in the fuel directly influence their fate upon combustion. Combustion conditions, such as temperature and atmosphere, influence the volatility and the interaction of inorganic components during combustion and gas cooling, which influences the state and size composition distribution of the particulate and condensed ash species. The intermediate species are transported with the bulk gas flow through the combustion systems, during which time the gases and entrained ash are cooled. Deposition, corrosion, and erosion occur when the ash intermediate species are transported to the heat-transfer surface, react with the surface, accumulate, sinter, and develop strength. Research over the past decade has significantly advanced understanding of ash formation, deposition, corrosion, and erosion mechanisms. Many of the advances in understanding and predicting ash-related issues can be attributed to advanced analytical methods to determine the inorganic composition of fuels and the resulting ash materials. These new analytical techniques have been the key to elucidation of the mechanisms of ash formation and deposition. This information has been used to develop algorithms and computer models to predict the effects of ash on combustion system performance.

  18. Ash dispersal dynamics: state of the art and perspectives (United States)

    Sulpizio, R.


    Volcanic ash, during dispersal and deposition, is among the major hazards from explosive eruptions. Volcanic ash fallout can disrupt communities downwind, interrupt surface transportation networks and lead to closure of airports. Airborne ash seriously threatens modern jet aircraft in flight. In several documented cases, encounters between aircraft and volcanic clouds have resulted in engine flameout and near crashes, so there is a need to accurately predict the trajectory of volcanic ash clouds in order to improve aviation safety and reduce economic losses. The ash clouds affect aviation even in distal regions, as demonstrated by several eruptions with far-range dispersal. Recent examples include Crater Peak 1992, Tungurahua 1999-2001, Mount Cleveland 2001, Chaitén 2008, Eyjafjallajökull 2010, Grimsvötn 2011, and Cordón-Caulle 2011. Amongst these, the April-May 2010 eruption of Eyjafjallajökull in Iceland provoked the largest civil aviation breakdown. Accumulation of tephra can produce roof collapse, interruption of lifelines (roads, railways, etc.), disruption to airport operations, and damage to communications and electrical power lines. Deposition of ash decreases soil permeability, increases surface runoff, and promotes floods. Ash leaching can result in the pollution of water resources, damage to agriculture, pastures, and livestock, impinge on aquatic ecosystems, and alteration of the geochemical environment on the seafloor. Despite the potential big impact, the dispersal dynamics of volcanic ash is still an unsolved problem for volcanologists, which claims for fiture high level research. Here, a critical overview about models (field, experimental and numerical) for inversion of field data to gain insights on physics of dispersal of volcanic ash is proposed. A special focus is devoted to some physical parameters that are far from a satisfactory inversion (e.g. reconstruction of total grain size distribution), and clues for future research are suggested.

  19. Particle analysis of volcanic ash with Electron Microscopy (United States)

    Lieke, K. I.; Kristensen, T. B.; Koch, C. B.; Korsholm, U. S.; Sørensen, J. H.; Bilde, M.


    Since the airspace closure over Europe due to the Eyjafjalla eruption in 2010, volcanic ash has come more in the focus of atmospheric science. The airspace closure accompanying the Grímsvötn eruption in 2011 clearly indicates that there is still a great need to increase the scientific understanding of the properties and impacts of volcanic ash particles. Determination of particle characteristics, preferably in near real time, serves as an important input to transport models in operational use for decision support and guidance of authorities. We collected particles before and after the Grímsvötn volcanic ash arrived at Copenhagen, Denmark, between 23 May and 31 May 2011, as well as at a number of other locations. The analysis of meteorological conditions shows that the particle collection performed before arrival of the volcanic ash may serve as a good reference sample. We have thus been able to identify significant differences in aerosol chemical composition during a volcanic ash event over Copenhagen. These results are compared to volcanic ash particles collected on Iceland. We provide unique data about single-particle structure, chemical composition, size and morphology of volcanic ash particles. Single-particle analysis by SEM, and mineralogical studies by XRD and TEM prove that the particles are composed of glass of a characteristic composition and small, nm sized minerals attached to the large (up to tens of µm) glass fragments. The derived information about volcanic ash particles can be used by transport models, resulting in improved information to the authorities in case of new volcanic ash events over Scandinavia or Europe.

  20. Ash transformation in suspension fired boilers co-firing coal and straw

    DEFF Research Database (Denmark)

    Zheng, Yuanjing; Jensen, Peter Arendt; Jensen, Anker Degn

    In this literature report is provided a status for the present knowledge level on ash properties when co-firing coal and biomass. The fly ash formed in boilers using co-firing of coal and straw do have a large influence on ash deposit formation, boiler corrosion, fly ash utilization and operation...

  1. Electrodialytic treatment of sewage sludge ash for the recovery of phosphorous and separation of heavy metals

    DEFF Research Database (Denmark)

    Ebbers, Benjamin; Ottosen, Lisbeth M.; Jensen, Pernille Erland;


    in separation from the ash suspension to the anode compartment. Although 96% of the recovered P was mobilized, only 55% was separated from the ash suspension. Less mobilization (m), but better separation (s), from the ash and ash suspension was observed for heavy metals, 78% (m) 69% (s) for Cd; 24% (m) 7% (s...

  2. Usage of fly ash as a coal desulphurization reagent

    Energy Technology Data Exchange (ETDEWEB)

    Yaman, S.; Kuecuekbayrak, S. [Istanbul Technical Univ. (Turkey). Chemical and Metallurgical Engineering Faculty


    This paper covers the direct usage of fly ash to remove sulphur from coal. Experiments were carried out on a high sulphur Turkish lignite. 5 g of fly ash was extracted in 200 ml of water under pressure and the dilute solution containing water extractable parts of fly ash was used as desulphurization reagent. Oxygen pressure was created over desulphurization medium during the extraction period by which dissolved oxygen was concentrated in the solution. Effects of temperature, partial pressure of oxygen, and time were investigated in the ranges of 403--498 K, 0.0--1.5 MPa and 15--90 min, respectively.

  3. CO2 uptake capacity of coal fly ash

    DEFF Research Database (Denmark)

    Mazzella, Alessandro; Errico, Massimiliano; Spiga, Daniela


    Coal ashes are normally considered as a waste obtained by the coal combustion in thermal power plants. Their utilization inside the site where are produced represents an important example of sustainable process integration. The present study was performed to evaluate the application of a gas......% corresponding to a maximum carbonation efficiency of 74%, estimated on the basis of the initial CaO content. The high degree of ash carbonation achieved in the present research, which was conducted under mild conditions, without add of water and without stirring, showed the potential use of coal fly ash in CO2...

  4. Research on municipal solid waste composting with coal ash

    Institute of Scientific and Technical Information of China (English)

    曾光明; 袁兴中; 李彩亭; 黄国和; 李建兵; 尚谦; 陈耀宁


    Considering the fact that there is much coal ash in the municipal solid waste (MSW) in some cities of China, the feasibility of composting in this situation was studied and the effect of content of the coal ash on the composting process and some basic relative technological parameters were investigated. The values of the moisture, the total organic matter, the content of coal ash, the C/N ratio and the ventilation were suggested to be 50%-60%, 40%-60%, 40%-60%, (25∶1)-(35∶1) and 0.05-0.20m3/(min*m3), respectively.

  5. Magmatic and fragmentation controls on volcanic ash surface chemistry (United States)

    Ayris, Paul M.; Diplas, Spyros; Damby, David E.; Hornby, Adrian J.; Cimarelli, Corrado; Delmelle, Pierre; Scheu, Bettina; Dingwell, Donald B.


    The chemical effects of silicate ash ejected by explosive volcanic eruptions on environmental systems are fundamentally mediated by ash particle surfaces. Ash surfaces are a composite product of magmatic properties and fragmentation mechanisms, as well as in-plume and atmospheric alteration processes acting upon those surfaces during and after the eruption. Recent attention has focused on the capacity of alteration processes to shape ash surfaces; most notably, several studies have utilised X-ray photoelectron spectroscopy (XPS), a technique probing the elemental composition and coordination state of atoms within the top 10 nm of ash surfaces, to identify patterns of elemental depletions and enrichments relative to bulk ash chemical composition. Under the presumption of surface and bulk equivalence, any disparities have been previously attributed to surface alteration processes, but the ubiquity of some depletions (e.g., Ca, Fe) across multiple ash studies, irrespective of eruptive origin, could suggest these to be features of the surface produced at the instant of magma fragmentation. To investigate this possibility further, we conducted rapid decompression experiments at different pressure conditions and at ambient and magmatic temperature on porous andesitic rocks. These experiments produced fragmented ash material untouched by secondary alteration, which were compared to particles produced by crushing of large clasts from the same experiments. We investigated a restricted size fraction (63-90 μm) from both fragmented and crushed materials, determining bulk chemistry and mineralogy via XRF, SEM-BSE and EPMA, and investigated the chemical composition of the ash surface by XPS. Analyses suggest that fragmentation under experimental conditions partitioned a greater fraction of plagioclase-rich particles into the selected size fraction, relative to particles produced by crushing. Trends in surface chemical composition in fragmented and crushed particles mirror that

  6. Volcanic ash as fertiliser for the surface ocean

    Directory of Open Access Journals (Sweden)

    B. Langmann


    Full Text Available Iron is a key limiting micro-nutrient for marine primary productivity. It can be supplied to the ocean by atmospheric dust deposition. Volcanic ash deposition into the ocean represents another external and so far largely neglected source of iron. This study demonstrates strong evidence for natural fertilisation in the iron-limited oceanic area of the NE Pacific, induced by volcanic ash from the eruption of Kasatochi volcano in August 2008. Atmospheric and oceanic conditions were favourable to generate a massive phytoplankton bloom in the NE Pacific Ocean which for the first time strongly suggests a connection between oceanic iron-fertilisation and volcanic ash supply.

  7. Agricultural uses of alkaline fluidized bed combustion ash: case studies

    Energy Technology Data Exchange (ETDEWEB)

    Stout, W.L.; Daily, M.R.; Nickeson, T.L.; Svendson, R.L.; Thompson, G.P. [USDA-ARS, University Park, PA (United States)


    Successful programmes were developed by Ahlstrom Development Ash Corporation and Air Products and Chemical for using fluidized bed combustion ash as a substitute for agricultural lime on dairy farms in northern New York state and on fruit and nut crops in the San Joaquin Valley of California. The companies developed these programmes by utilizing the methodology developed through USDA-ARS research and working closely with agricultural consultants and regulatory agencies to ensure that the ash applications were both agronomically and environmentally sound. 1 ref.

  8. Volcanic ash as fertiliser for the surface ocean

    Directory of Open Access Journals (Sweden)

    B. Langmann


    Full Text Available Iron is a key limiting micro-nutrient for marine primary productivity. It can be supplied to the ocean by atmospheric dust deposition. Volcanic ash deposition into the ocean represents another external and so far largely neglected source of iron. This study demonstrates strong evidence for natural fertilisation in the iron-limited oceanic area of the NE Pacific, induced by volcanic ash from the eruption of Kasatochi volcano in August 2008. Atmospheric and oceanic conditions were favourable to generate a massive phytoplankton bloom in the NE Pacific Ocean which for the first time establishes a causal connection between oceanic iron-fertilisation and volcanic ash supply.

  9. Trace element geochemistry of feed coal, fly and bottom ashes of Turkish power plants: implications for ash utilisation

    Energy Technology Data Exchange (ETDEWEB)

    Gayer, R.A.; Karayigit, A.I.; Goldsmith, S.; Onacak, T.; Rose, M. [Cardiff University, Cardiff (United Kingdom). Dept of Earth Sciences


    Recent environmental concern has led to studies of the fate of environmentally sensitive elements (ESEs) during the combustion of coal in power plants. Of particular interest has been the partioning of potentially hazardous trace elements in coal-combustion waste products (fly ash and bottom ash) and in flue gases. This paper reports on a preliminary investigation into the trace element geochemistry of feed coals, bottom ash and fly ash in thirteen power units in Turkey. It concentrates on sixteen trace elements, five of which are of major environmental concern (Be, As, Mo, Pb, and Tl), two of moderate concern (Cu and Zn), three of minor concern (Mn, Co and Ba). Two of the ESEs are radiogenic (Th and U). Ti, Cs, La, and W, which show interesting distributions, are also considered. The approach has been to analyse the feed coals to highlight any significant element enrichment and to carry out mass balance calculations to determine the partioning of elements between bottom and fly ash. Results indicate that solid residues, particularly fly ash may show unusually high concentrations of moderately volatile ESEs such as As, Pb, Tl, Mo, Be and Zn. The use of such enriched fly ash should be treated with caution. 9 refs., 2 figs., 3 tabs.

  10. Greenlandic Waste Incineration Fly And Bottom Ash As Secondary Resource In Mortar

    DEFF Research Database (Denmark)

    Kirkelund, Gunvor Marie; Ottosen, Lisbeth M.; Jensen, Pernille Erland


    Today, 900 tons incineration fly ash is shipped abroad annually from Greenland for deposits, whereas the 6,000 tons incineration bottom ash is deposited locally. These incineration ashes could be valuable in concrete production, where the cement has to be shipped to Greenland. For this purpose...... and cement with fly ash. Based on the compressive strength tests, it is found that using Greenlandic incineration ashes in mortar as 5% cement replacement could consume all ash instead of disposals, and could thus turn the ashes into a local resource and simultaneously reduce the import of cement....

  11. Wood ash used as partly sand and/or cement replacement in mortar

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Hansen, Esben Østergaard; Jensen, Pernille Erland;


    Wood ash (WA) is the residue generated during incineration of wood and wood products. The WAs in focus of this work are from incineration of virgin wood. Physical and chemical properties of WA vary significantly depending on many factors related to the wood species and the incineration process...... from the differences in ash characteristics to the properties of the mortar samples. The characteristics of the ashes did vary considerably. For example, one ash had very high loss on ignition (LoI) of 14% compared to 3% for the other ashes. Ash solubility in water ranged from 18% to 28%. Two...... of the ashes were dry and sampled just after the incineration, whereas one ash had a water content of 15%, because the ash was sprayed with water to avoid dust during ash handling at the incineration plant. Regardless of replacing cement or sand with WAs, the compressive strength decreased compared...

  12. Incorporation of treated straw and wood fly ash into clay building brick

    DEFF Research Database (Denmark)

    Chen, Wan; Ottosen, Lisbeth M.; Jensen, Pernille Erland;


    in the treated ash, suggests the possibility of the ash reuse in sintered clay bricks. In this study, the straw and wood fly ash treated by washing and EDR was incorporated into yellow clay bricks at different substitution rates. The properties of the clay-ash bricks were studied in terms of shrinkage, water...... absorption, porosity, density, compressive strength and leaching behavior, and compared with the 100% clay bricks. It’s promising to use the treated ash as a secondary building material....

  13. Alkali-activation potential of biomass-coal co-fired fly ash


    Shearer, C.R.; Provis, J.L.; Bernal, S.A.; Kurtis, K.E.


    Co-fired fly ash, derived from the co-combustion of coal and biomass, is examined as a potential precursor for geopolymers. Compared to a coal fly ash, two co-fired fly ashes have a lower vitreous content and higher carbon content, primarily due to differing combustion processing variables. As a result, binders produced with these co-fired fly ashes have reduced reaction potential. Nevertheless, compressive strengths are generally highest for all ashes activated with solutions with a molar ra...

  14. Coal Ash Corrosion Resistant Materials Testing

    Energy Technology Data Exchange (ETDEWEB)

    D. K. McDonald; P. L. Daniel; D. J. DeVault


    In April 1999, three identical superheater test sections were installed into the Niles Unit No.1 for the purpose of testing and ranking the coal ash corrosion resistance of candidate superheater alloys. The Niles boiler burns high sulfur coal (3% to 3.5%) that has a moderate alkali content (0.2% sodium equivalents), thus the constituents necessary for coal ash corrosion are present in the ash. The test sections were controlled to operate with an average surface metal temperature from approximately 1060 F to 1210 F which was within the temperature range over which coal ash corrosion occurs. Thus, this combination of aggressive environment and high temperature was appropriate for testing the performance of candidate corrosion-resistant tube materials. Analyses of the deposit and scale confirmed that aggressive alkali sulfate constituents were present at the metal surface and active in tube metal wastage. The test sections were constructed so that the response of twelve different candidate tube and/or coating materials could be studied. The plan was to remove and evaluate one of the three test sections at time intervals of 1 year, 3 years, and 5 years. This would permit an assessment of performance of the candidate materials as a function of time. Test Section A was removed in November 2001 after about 24 months of service at the desired steam temperature set point, with about 15.5 months of exposure at full temperature. A progress report, issued in October 2002, was written to document the performance of the candidate alloys in that test section. The evaluation described the condition of each tube sample after exposure. It involved a determination of the rate of wall thickness loss for these samples. In cases where there was more than one sample of a candidate material in the test section, an assessment was made of the performance of the alloy as a function of temperature. Test Sections B and C were examined during the November 2001 outage, and it was decided that

  15. Soil food web structure after wood ash application

    DEFF Research Database (Denmark)

    Mortensen, Louise Hindborg; Qin, Jiayi; Cruz-Paredes, Carla

    In 2006, the European Council established a mandatory target of 20 % renewable energy of consumption by 2020. Part of the replacement is burning biomass for heating and electricity. ~ Whole tree biomass harvesting for biofuel combustion intensifies removal of nutrients from the by applying ash from...... the consequences of returning wood ash to biofuel producing coniferous forest. We that the change in pH and increased availability of nutrients after ash application to forest floor can facilitate an increase in the bacteria to fungi ratio with possible effects for the soil food by applying ash of different...... concentrations to experimental plots in a coniferous forest the soil will be collected with varying intervals and subsequently analyzed. The food web included several trophic levels; bacteria/fungi, protozoa, nematodes, enchytraeids and microarthropods and arthropods. Results from 2014 indicated that bacteria...

  16. Ash Meadows Pupfish Preserve: A proposal from The Nature Conservancy (United States)

    US Fish and Wildlife Service, Department of the Interior — The Ash Meadows region of southwest Nevada has evolved since the last period of glaciation into a unique alkali desert ecosystem. The remnant springs, pools and...

  17. The Evolving Higher Education Professoriate: Implications for ASHE. (United States)

    Newell, L. Jackson; Morgan, Don A.


    An analysis of the changing characteristics and values of Association for the Study of Higher Education (ASHE) professors, based on a review of the historical record, a recent survey of the membership, and an earlier study is presented. (MLW)

  18. Volcanic Ash Detection Using Raman LIDAR: "VADER" Project (United States)

    National Aeronautics and Space Administration — Volcanic ash is a significant hazard to aircraft engine and electronics and has caused damage to unwary aircraft and disrupted air travel for thousands of travelers,...

  19. Solid State Multiwavelength LIDAR for Volcanic Ash Monitoring Project (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. proposes to develop a compact, multiwavelength LIDAR with polarization analysis capability that will be able to identify volcanic ash clouds...

  20. The Trail Inventory of Ash Meadows NWR [Cycle 2 (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this report is to create a baseline inventory of all non-motorized trails on Ash Meadows National Wildlife Refuge. Trails in this inventory are...

  1. Fly-ash lobby design to convert the sceptics

    Energy Technology Data Exchange (ETDEWEB)

    Bile, P.


    New uses for pfa in structural concrete have been pioneered at Didcot power station. Twenty percent cost savings and significant gains in long-term strength are claimed for the new concrete, called high fly-ash content concrete (HFCC).

  2. Fly ash based zeolitic pigments for application in anticorrosive paints (United States)

    Shaw, Ruchi; Tiwari, Sangeeta


    The purpose of this work is to evaluate the utilization of waste fly ash in anticorrosive paints. Zeolite NaY was synthesized from waste fly ash and subsequently modified by exchanging its nominal cation Na+ with Mg2+ and Ca2+ ions. The metal ion exchanged zeolite was then used as anticorrosive zeolitic pigments in paints. The prepared zeolite NaY was characterized using X-Ray diffraction technique and Scanning electron microscopy. The size, shape and density of the prepared fly ash based pigments were determined by various techniques. The paints were prepared by using fly ash based zeolitic pigments in epoxy resin and the percentages of pigments used in paints were 2% and 5%. These paints were applied to the mild steel panels and the anticorrosive properties of the pigments were assessed by the electrochemical spectroscopy technique (EIS).

  3. Ash after forest fires. Effects on soil hydrology and erosion (United States)

    Bodí, Merche B.


    Hillslopes were though to be most susceptible to enhanced hydro-geomorphological responses immediately following burning, with susceptibility declining during the first months or years depending on the soil and vegetation recovery. However, Cerdà (1998) found some indices in that immediately after the fire, the thin wettable ash layer that typically covers the ground could absorb rainfall and prevent or delay the onset of overland flow and associated erosion. Therefore the time lag while ash remains on the ground become of crucial importance to protect the soil after a wildfire. The effect of this ash layer was rarely been considered in detail because ash has often been reduced or redistributed by wind or water erosion before the onset of monitoring and thus the data collection typically begun some weeks or month after the fire. The first papers focussed only on ash and its hydrological effects were published by Cerdà and Doerr (2008) and by Woods and Balfour (2008). The results showed that the soil covered with ash indeed reduced and delayed surface runoff, reduced soil splash detachment and produced lower sediment yield compared to bare terrain. However, these findings arose more questions, as for instance: Why in other research there were indices that ash reduces infiltration? what is the mechanism by which why ash reduces overland flow? The research went further with Bodí PhD. First of all, it was crucial the agreement on the fact that the material "ash" is very variable depending on the original vegetation and the type and temperature of combustion. Therefore ash properties are different between wildfires even and within a fire. This is the main reason of its different effects and thus ash not always reduces runoff and sediment yield. In this way, depending on the nature of ash, it can increase overland flow if it is crusted (usually it contains a high content of calcium carbonate), it is water repellent (with high contents of organic carbon and specially

  4. Ash Meadows National Wildlife Refuge : A plan for the future (United States)

    US Fish and Wildlife Service, Department of the Interior — The management plan is to maintain Ash Meadows Refuge as a natural ecosystem. To accomplish this, the area will be restored as much as possible to conditions which...

  5. Reuse of alkali from bio fly ash; Alkaligenanvendelse fra bioflyveaske

    Energy Technology Data Exchange (ETDEWEB)

    Thomsen, Kaj; Jensen, Joergen Peter; Simonsen, Peter; Sander, B.


    Experiments to leach potassium salts from fly ash from straw combustion were performed. The fly ash was produced in the bio mass boiler at the Avedoere power plant in south western Copenhagen, Denmark. The fly ash contained approximately 90 mass percent water soluble material. When the fly ash was dissolved at low pH, a slightly higher solubility was found. 100 gram fly ash consisted typically of 9 gram insoluble material, 9 gram calcium phosphate, 29 gram potassium sulfate and 53 gram of potassium chloride. In addition, 100 gram of fly ash contained approximately 1 mg of cadmium, corresponding to a concentration of cadmium of 10 ppm in the fly ash. Fly ash from the bio mass boiler at the Avedoere power plant apparently has a significantly larger content of potassium salts than fly ash from other boilers. The Extended UNIQUAC thermodynamic model was used for calculating relevant phase diagrams and calculations of the necessary amount of water required for dissolving all the KCl and all KCl + K{sub 2}SO{sub 4} of the fly ash. This theoretical minimum amount of water was calculated at a range of temperatures between 10 and 100 deg. C. The amount of water required at 100 deg. C was less than half of that required at 10 deg. C. Experiments were performed in order to find a feasible method for separating the potassium salts of the fly ash from the ash residue and especially from the soluble cadmium salts found in the fly ash. Experiments with counter current leaching of fly ash in a fluid bed gave unsatisfactory results. Apparently there was a lack of contact between the wash water and the ash. In addition, sedimentation was very slow resulting in an incomplete separation of wash water and ash residue. Experiments with ion exchange by adding CaCl{sub 2} to the wash water and successive precipitation of gypsum or anhydrite gave unsatisfactory results. Process simulation had shown that by this method the necessary amount of washing water could be decreased. This is due to

  6. Optical properties of fly ash. Volume 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Self, S.A.


    Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executive summary of the whole program followed by the dissertation of Ghosal and Ebert. Volume 2 contains the dissertation of Ebert which covers the measurements of the optical constants of slags, and calculations of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.

  7. Improved Sorting Scheme of Microstructure of Fly Ash

    Institute of Scientific and Technical Information of China (English)

    王立刚; 彭苏平


    Aiming at the problem of the existing sorting for microstructure of flyash, an improved scheme was put forward in this paper. First, fly ash particles are divided into four groups as low-calcium, iron, high calcium and char particle acco rding to the substance components of fly ash. Then fly ash particles are divided into 14 sub-groups, for example: cenospheres, plerospheres, solid spheres, porous char and dense char based on their chemical composition, shape and the chara cteristics of inner-structure of fly ash. It has a distinct difference in granu le configuration, inner-structure and substance components. Some disadvantages of the existing scheme such as unilateralism and imprecision have been overcome in the advanced schemes.

  8. Utilization of coal combustion fly ash in terracotta bodies

    Energy Technology Data Exchange (ETDEWEB)

    Kara, A.; Kurama, S. [Dept. of Materials Science and Engineering, Anadolu Univ., Eskisehir (Turkey); Kurama, H.; Kara, Y. [Osmangazi Univ., Mining Engineering Dept., Eskisehir (Turkey)


    In this present work, coal combustion fly ash from a power plant in Turkey was used in combination with a traditional raw material in terracotta production with the aim of having a product with improved physico-mechanical properties and lower production cost. Several compositions were prepared by adding different amounts of fly ash (ranging from 0 to 20%) in a yellow firing terracotta formulation and shaped by wet pressing. Following firing at a suitable temperature, some of the physical properties of the resultant tiles were determined as a function of the fly ash content. A combination of XRD, SEM and EDX techniques were also employed to correlate the properties with the phase composition. The results indicated that fly ash could be utilized easily in certain amounts in such an application. (orig.)

  9. Ash properties of some dominant Greek forest species

    Energy Technology Data Exchange (ETDEWEB)

    Liodakis, S. [Laboratory of Inorganic and Analytical Chemistry, Department of Chemical Engineering, National Technical University of Athens (NTUA), 9 Iroon Polytechniou Street, Athens 157 73 (Greece)]. E-mail:; Katsigiannis, G. [Laboratory of Inorganic and Analytical Chemistry, Department of Chemical Engineering, National Technical University of Athens (NTUA), 9 Iroon Polytechniou Street, Athens 157 73 (Greece); Kakali, G. [Laboratory of Inorganic and Analytical Chemistry, Department of Chemical Engineering, National Technical University of Athens (NTUA), 9 Iroon Polytechniou Street, Athens 157 73 (Greece)


    The elemental and chemical wood ash compositions of six dominant Greek fuels was investigated using a variety of techniques, including thermal gravimetric analysis (TG), differential thermal analysis (DTA), atomic absorption spectroscopy (AAS) and X-ray diffraction (XRD). In addition, the alkalinity of wood ash was determined by titration. The ash was prepared by combustion at low (600 deg. C), middle (800 deg. C) and high temperatures (1000 deg. C). The ash composition is very important because thousands of hectares of wildlands are burned annually in Greece. The resulting deposits affect soil properties (i.e., pH) and provide a source of inorganic constituents (i.e., Ca, K, Na, Mg, etc.), while the most soluble compounds (i.e., sodium and potassium hydroxides and carbonates) do not persist through the wet season. The samples selected were: Pinus halepensis (Aleppo pine), Pinus brutia (Calabrian pine), Olea europaea (Olive), Cupressus sempervirens (Italian cypress), Pistacia lentiscus (Mastic tree), Quercus coccifera (Holly oak)

  10. Ash formation under pressurized pulverized coal combustion conditions (United States)

    Davila Latorre, Aura Cecilia

    Coal combustion is a source of inorganic particulate matter (ash), which can deposit in boilers and also be emitted into the atmosphere becoming part of ambient fine particulate matter (PM 2.5). In order to decrease coal combustion emissions per unit of power produced, higher efficiency systems have been proposed, including systems operating at elevated pressures. These new operating conditions will affect pollutant formation mechanisms, particularly those associated with the conversion of mineral matter to ash. Ash particle formation mechanisms are particularly sensitive to changes in pressure as they are related to the structure of coal char particles at early stages of combustion. To assess the importance of pressure on ash particle formation, pyrolyzed chars and ash particles from pressurized pulverized combustion of two bituminous and one subbituminous U.S. coals at operating pressures up to 30 atm were studied. Pressure changes the distribution of char particle types, changing the spatial distribution of the minerals during the combustion process and therefore affecting particle formation mechanisms. Chars were examined by Scanning Electron Microscopy (SEM) and classified into two different types (cenospheric and solid) depending on porosity and wall thickness. A correlation for estimating the amount of these cenospheric char particles was then proposed for bituminous coals based on the operating conditions and coal maceral analysis. The ash particle size distribution of the coals combusted at different operating pressures was measured using Computer Controlled Scanning Electron Microscopy (CCSEM). The results of the char characterization and ash particle size distribution measurements were then incorporated into an ash particle formation algorithm that was proposed and implemented. The model predicts ash particle size and composition distributions at elevated pressures under conditions of complete char burnout. Ash predictions were calculated by first

  11. Multifrequency radar imaging of ash plumes: an experiment at Stromboli (United States)

    Donnadieu, Franck; Freret-Lorgeril, Valentin; Delanoë, Julien; Vinson, Jean-Paul; Peyrin, Frédéric; Hervier, Claude; Caudoux, Christophe; Van Baelen, Joël; Latchimy, Thierry


    Volcanic ash emissions in the atmosphere are hazardous to aviation while ash fallout affects people and human activities and may cause damage to infrastructures and economic losses. In the framework of the French Government Laboratory of Excellence ClerVolc initiative, an experiment was carried out on Stromboli volcano (Italy), between 28 September and 4 October 2015. The aim was to retrieve various physical properties of the ash plumes, especially the mass loading parameters which are critical for the modelling of ash dispersal. We used a complementary set of cutting edge techniques recording in different bands of the electromagnetic spectrum. The innovative instrument setup consisted in three radars, hyperspectral thermal infrared and dual-band UV cameras, a mini DOAS-Flyspec and a multigas sensor. A drone equipped with differential GPS was flown near the ash plumes with several sensors including SO2, CO2 and particle counter. We mainly focus on radar measurements of over 200 ash plumes and present some preliminary comparisons at three frequencies. The BASTA Doppler radar at 95 GHz, originally designed for atmospheric studies, was deployed at about 2.2 km in slant distance from the eruptive craters. It was configured to observe volumes above one of the active craters with a spatio-temporal resolution of 12.5 m and 1 s. From the same location, a 1.2 GHz volcano Doppler radar (VOLDORAD) was recording the signature of ballistics and small lapilli at 0.15 s in 60 m-deep volumes. In addition, a commercial 24 GHz micro rain Doppler radar (MRR) simultaneously recorded activity from the Rochette station, at 400 to 650 m from the active craters with a sampling rate of 10 s and a resolution of 25 m. The latter was pointing almost perpendicularly to the other radar beams. Reflectivity factors were measured inside the ash plume above the source vent by the BASTA radar (3 mm wavelength) spanning -9 to +21 dBZ. Fallout could sometimes be tracked during several minutes within

  12. Environmental impact of manganese due to its leaching from coal fly ash. (United States)

    Prasad, Bably; Mondal, Kajal K R


    In India, so far not much efforts have been made to use coal ash as backfill material in underground/ open cast mines and to predict its subsequent effect on ground water quality. One of the main problems in disposing of big quantities of coal ash is the possible leaching of different pollutants, including manganese. A thorough investigation regarding leaching of manganese from different fly ashes is required to know the impact of manganese due to its leaching from fly ash to ground water as well as surface water. In the present study, short term and long term leaching studies have been carried out on fly ash, bottom ash, pond ash and weathered ash of Chandrapura thermal power plant, Bokaro, Jharkhand and Ramagundam thermal power plant, Ramagundam, Andhra Pradesh. The amount of manganese released in different experiments has been evaluated. The leachate of Chandrapura fly ash has more manganese concentration (0.2001 mg/L) than the leachate of bottom ash, pond ash and weathered ash. A field investigation at Damoda abandoned open cast mine, filled with pond ash of Chandrapura thermal power plant revealed that concentration of manganese in ground water beneath the ash filled mine has been found very high (maximum up to 6.0 mg/L). But its migration to a long distance has not been seen. Remedial measures for coal ash disposal have also been formulated.

  13. Phenolic acids as bioindicators of fly ash deposit revegetation. (United States)

    Djurdjević, L; Mitrović, M; Pavlović, P; Gajić, G; Kostić, O


    The floristic composition, the abundance, and the cover of pioneer plant species of spontaneously formed plant communities and the content of total phenolics and phenolic acids, as humus constituents, of an ash deposit after 7 years of recultivation were studied. The restoration of both the soil and the vegetation on the ash deposits of the "Nikola Tesla-A" thermoelectric power plant in Obrenovac (Serbia) is an extremely slow process. Unfavorable physical and chemical characteristics, the toxicity of fly ash, and extreme microclimatic conditions prevented the development of compact plant cover. The abundance and cover of plants increased from the central part of the deposit towards its edges (ranging from 1-80%). Festuca rubra L., Crepis setosa Hall., Erigeron canadensis L., Cirsium arvense (L.) Scop., Calamagrostis epigeios (L.) Roth., and Tamarix gallica L. were the most abundant species, thus giving the highest cover. Humus generated during the decomposition process of plant remains represents a completely new product absent in the ash as the starting material. The amount of total phenolics and phenolic acids (38.07-185.16 microg/g of total phenolics and 4.12-27.28 microg/g of phenolic acids) in fly ash increased from the center of the deposit towards its edges in correlation with the increase in plant abundance and cover. Ash samples contained high amounts of ferulic, vanillic, and p-coumaric acid, while the content of both p-hydroxybenzoic and syringic acid was relatively low. The presence of phenolic acids indicates the ongoing process of humus formation in the ash, in which the most abundant pioneer plants of spontaneously formed plant communities play the main role. Phenolic compounds can serve as reliable bioindicators in an assessment of the success of the recultivation process of thermoelectric power plants' ash deposits.

  14. Ashes 2013 - A network theory analysis of Cricket strategies


    Mukherjee, Satyam


    We demonstrate in this paper the use of tools of complex network theory to describe the strategy of Australia and England in the recently concluded Ashes 2013 Test series. Using partnership data made available by cricinfo during the Ashes 2013 Test series, we generate batting partnership network (BPN) for each team, in which nodes correspond to batsmen and links represent runs scored in partnerships between batsmen. The resulting network display a visual summary of the pattern of run-scoring ...

  15. Engineering Properties of Alkali-Activated Fly Ash Concrete



    This paper reports the results of experimental research on certain engineering properties of a new (portland cement-free) concrete made with alkali-activated fly ash. Laboratory tests were conducted to determine its (bending and compression) mechanical strength, modulus of elasticity, bond strength, and shrinkage. The results show that mortar and concrete made with portland cement-free activated fly ash develop a high mechanical strength in short periods of time, have a moderate modulus of el...


    Energy Technology Data Exchange (ETDEWEB)

    Dr. Joseph N.D. Dodoo; Dr. Joseph M. Okoh


    Surface area analyses performed on fly ash samples reveal that the surface area is controlled by carbon content. The higher surface areas found in large particles are due to the presence of highly porous carbonaceous particles. Adsorption-desorption isotherms and t-plots of fly ash samples indicate that fly ash is porous. BJH Adsorption/Desorption pore size analysis reveal that pore diameters are independent of sieve size. They appear to be dependent only on the nature of the material which confers porosity. Based on the results of Brown and Dykstra (41) it is reasonable to assume that calculations of reaction rates at temperatures above 550 C were confounded by weight losses from processes other than carbon oxidation and, therefore, are not useful in determination of the temperature dependence of carbon oxidation in fly ash. The results of the present study indicate that temperatures below 550 C should be used for future studies in order to satisfactorily assess the temperature dependence of carbon oxidation in fly ash. Furthermore, it is also advisable that percent carbon determinations be performed on fly ash samples after the oxidation reactions to determine whether all carbon present in fly ash is oxidized. This will ensure that reaction rates are representative of the complete oxidation of carbon. An inverse relationship was determined between reaction rates and oxygen concentration for this study. As discussed, this may be due to volatilization of volatiles from fly ash and ease of transport of products away from the reaction sites by the action of the vacuum applied to the samples. A more accurate determination of oxygen dependence of carbon oxidation can be accomplished by the use of specialty gases containing different concentrations of oxygen which could eliminate the need to apply vacuum to the samples.

  17. Pure zeolite synthesis from silica extracted from coal fly ashes

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, N.; Querol, X.; Plana, F.; Andres, J.M.; Janssen, M.; Nugteren, H. [CSIC, Barcelona (Spain). Inst. Earth Science ' Jaume Almera'


    Pure zeolites can be synthesised from silica extracted from fly ash by alkaline leaching. If the process is optimised the solid residue arising from this extraction may also contain a relatively high content of zeolitic material mixed with residual fly ash components. Both the pure and the impure zeolitic material have a high potential for application in waste-water and flue gas-cleaning technologies. The silica extraction potential of 23 European coal fly ashes covering most of the possible fly ash types is investigated in this study. Optimisation of leaching processes, by varying temperature, time and alkali/fly ash rates, permitted extraction yields up to 140 g of SiO{sub 2} per kg using a single step process, but the extraction yields may reach up to 210 g kg{sup -1} by applying thermal pre-treatments prior to the extraction. The solid residue arising from the silica extraction experiments shows a high NaP1 zeolite content. A high Si/Al ratio of the glass matrix, the occurrence of easily soluble silica phases in the original fly ash and a high reactive surface area were found to be the major parameters influencing silica extraction. High purity 4A and X zeolitic material was obtained by combining the silica extracts from the Meirama fly ash and a waste solution from the Al-anodising industry. The results allowed conversion of the silica extraction yields to an equivalent 630 g of pure 4A-X zeolite per kg of fly ash with a cation exchange capacity of 4.7 meq g{sup -1}.

  18. Experimental research of non-burned fly-ash ceramsite

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yi-shun; ZHANG Chao; GUO Jin-min; ZHOU Shao-tong


    Selected non-burned method and took fly-ash as main material, together with lime and gypsum, to inspire the activity of volcanic ash, took a kind of poly-organics to replace the clay as binder, and then made small balls with machine, wrapped slurry twice and autoclaved 8 hours at normal atmosphere, made ceramsite in this way can endure higher compression strength. Comparing with common concrete, the ceramsite concrete is about 25% lighter on weight.

  19. Hydrothermal synthesis of zeolites from coal fly ash


    Kotova, OB; Shabalin, Igor L; Shushkov, DA; Kocheva, LS


    The fly ash, from the combustion of coal to produce energy and heat, is an industrial waste, in which large accumulations represent a serious environmental threat. To reduce the environmental burden and improve the economic benefits of energy production, the science and industry focus on the transformation of coal combustion byproducts into new functional materials. The fly ash was studied by modern analytical methods. As a result of the hydrothermal reaction, several types of zeolites were s...

  20. Evaluation of fly ash as a component of potting substrates

    Energy Technology Data Exchange (ETDEWEB)

    Menzies, N.W.; Aitken, R.L. [University of Queensland, St. Lucia, Qld. (Australia). Dept. of Agriculture


    A series of laboratory and glasshouse experiments were undertaken to assess the potential for incorporating fly ash in soilless potting substrates. Since fly ash is available at low cost and can be successfully substituted for a considerable portion of the expensive peat component in the peat:sand mix, its use at low application rates in potting substrates may be desirable from an economic viewpoint.

  1. Hydraulic transportation of fly ash: a laboratory-scale investigation

    Energy Technology Data Exchange (ETDEWEB)

    Jain, M.K.; Sastry, B.S. [Anna University, Chennai (India). Dept. of Mining Engineering


    Flow behaviour of fly ash slurry is a very complex phenomenon. The present study tries to examine the relation between flow rate and pressure loss of fly ash slurry under laboratory-scale experiment set up in the light of available theoretical background. Pressure loss increases with the increase in flow rate and solid concentration but pressure losses can be saved by the addition of 2200 PPM (parts per million) concentration of polyacrylamide polymer. 6 refs., 7 figs., 4 tabs.

  2. Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

    Directory of Open Access Journals (Sweden)

    Zhiliang Chen


    Full Text Available Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization of heavy metals in municipal solid waste incineration (MSWI fly ash. Three heavy metals (Cu, Cr, Pb loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a significant decrease in particle size, a rise in its BET-surface, and turning basic crystals therein into amorphous structures. The dissolution rate of acid buffering materials present in activated particles is enhanced, resulting in a rising pH value of the leachate, reducing the leaching out of some heavy metals.

  3. Recyclability of Concrete Pavement Incorporating High Volume of Fly Ash

    Directory of Open Access Journals (Sweden)

    Isamu Yoshitake


    Full Text Available Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass was experimentally investigated, focusing on the strength development at an early age. Limestone powder was added to improve the early strength; flexural strength at two days reached 3.5 MPa, the minimum strength for traffic service in Japan. The matured fly ash concrete made with a cement content of 200 kg/m3 achieved a flexural strength almost equal to that of the control concrete without fly ash. Additionally, Portland cement made from the tested fly ash concrete was tested to confirm recyclability, with the cement quality meeting the Japanese classification of ordinary Portland cement. Limestone-based recyclable fly ash concrete pavement is, thus, a preferred material in terms of sustainability.

  4. Ash Reduction of Corn Stover by Mild Hydrothermal Preprocessing

    Energy Technology Data Exchange (ETDEWEB)

    M. Toufiq Reza; Rachel Emerson; M. Helal Uddin; Garold Gresham; Charles J. Coronella


    Lignocellulosic biomass such as corn stover can contain high ash content, which may act as an inhibitor in downstream conversion processes. Most of the structural ash in biomass is located in the cross-linked structure of lignin, which is mildly reactive in basic solutions. Four organic acids (formic, oxalic, tartaric, and citric) were evaluated for effectiveness in ash reduction, with limited success. Because of sodium citrate’s chelating and basic characteristics, it is effective in ash removal. More than 75 % of structural and 85 % of whole ash was removed from the biomass by treatment with 0.1 g of sodium citrate per gram of biomass at 130 °C and 2.7 bar. FTIR, fiber analysis, and chemical analyses show that cellulose and hemicellulose were unaffected by the treatment. ICP–AES showed that all inorganics measured were reduced within the biomass feedstock, except sodium due to the addition of Na through the treatment. Sodium citrate addition to the preconversion process of corn stover is an effective way to reduced physiological ash content of the feedstock without negatively impacting carbohydrate and lignin content.


    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen; Indrek Kulaots


    The overall objective of the present project was to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific issues addressed included: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity based on pilot-plant studies; and (3) the kinetics and mechanism of ash ozonation. This laboratory data has provided scientific and engineering support and underpinning for parallel process development activities. The development work on the ash ozonation process has now transitioned into a scale-up and commercialization project involving a multi-industry team and scheduled to begin in 2004. This report describes and documents the laboratory and pilot-scale work in the above three areas done at Brown University and the University of Utah during this three-year project.

  6. Corrosion of Modified Concrete with Sugar Cane Bagasse Ash

    Directory of Open Access Journals (Sweden)

    R. E. Núñez-Jaquez


    Full Text Available Concrete is a porous material and the ingress of water, oxygen, and aggressive ions, such as chlorides, can cause the passive layer on reinforced steel to break down. Additives, such as fly ash, microsilica, rice husk ash, and cane sugar bagasse ash, have a size breakdown that allows the reduction of concrete pore size and, consequently, may reduce the corrosion process. The objective of this work is to determine the corrosion rate of steel in reinforced concrete by the addition of 20% sugar cane bagasse ash by weight of cement. Six prismatic specimens (7×7×10 cm with an embedded steel rod were prepared. Three contained 20% sugar cane bagasse ash by weight of cement and the other three did not. All specimens were placed in a 3.5% NaCl solution and the corrosion rate was determined using polarization resistance. The results showed that reinforced concrete containing sugar cane bagasse ash has the lowest corrosion rates in comparison to reinforced concrete without the additive.

  7. Development of plasma spray coating using coal ash

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, S.C.; Sarkar, P.C.; Mishra, P.C.; Sreekumar, K.P.; Padmanabhan, P.V.A. [Regional Engineering College, Rourkela (India)


    In India about 70 million tonnes of fly ash is generated annually and the figure is growing at a faster rate due to industrial and urban demand. Worldwide, fly ash is being used to generate value added products. In India about 10% of fly ash generated is utilised and if feverish activity is not initiated the percent utilisation can go down. The present piece of work has been undertaken to use the fly ash and graphite (from the rejected electrodes of arc furnaces) for developing plasma spray composite coating on metal substrates. Fly ash and graphite powder (at 10% and 20% wt) mix was plasma sprayed at various operating conditions of the plasma torch on different metal substrate, viz. copper and stainless steel. The coating thus formed was characterised by X-ray diffraction analysis, electron microscopy, microhardness measurement and measurement of interface adhesion strength. A maximum coating thickness of {approximately} 220 micron is obtained with fly ash +20% graphite. The adherence strength is found to vary between 10-35 MNm{sup 2} and is maximum in case of copper substrates. 8 refs., 4 figs., 1 tab.

  8. Producing a synthetic zeolite from secondary coal fly ash. (United States)

    Zhou, Chunyu; Yan, Chunjie; Zhou, Qi; Wang, Hongquan; Luo, Wenjun


    Secondary coal fly ash is known as a by-product produced by the extracting alumina industry from high-alumina fly ash, which is always considered to be solid waste. Zeolitization of secondary coal fly ash offers an opportunity to create value-added products from this industrial solid waste. The influence of synthesis parameters on zeolite NaA such as alkalinity, the molar ratio of SiO2/Al2O3, crystallization time and temperature was investigated in this paper. It was found that the types of synthetic zeolites produced were to be highly dependent on the conditions of the crystallization process. Calcium ion exchange capacity and whiteness measurements revealed that the synthesized product meets the standard for being used as detergent, indicating a promising use as a builder in detergent, ion-exchangers or selective adsorbents. Yield of up to a maximum of 1.54 g/g of ash was produced for zeolite NaA from the secondary coal fly ash residue. This result presents a potential use of the secondary coal fly ash to obtain a high value-added product by a cheap and alternative zeolitization procedure.

  9. Fly ash reinforced thermoplastic vulcanizates obtained from waste tire powder. (United States)

    Sridhar, V; Xiu, Zhang Zhen; Xu, Deng; Lee, Sung Hyo; Kim, Jin Kuk; Kang, Dong Jin; Bang, Dae-Suk


    Novel thermoplastic composites made from two major industrial and consumer wastes, fly ash and waste tire powder, have been developed. The effect of increasing fly ash loadings on performance characteristics such as tensile strength, thermal, dynamic mechanical and magnetic properties has been investigated. The morphology of the blends shows that fly ash particles have more affinity and adhesion towards the rubbery phase when compared to the plastic phase. The fracture surface of the composites shows extensive debonding of fly ash particles. Thermal analysis of the composites shows a progressive increase in activation energy with increase in fly ash loadings. Additionally, morphological studies of the ash residue after 90% thermal degradation shows extensive changes occurring in both the polymer and filler phases. The processing ability of the thermoplastics has been carried out in a Monsanto processability testing machine as a function of shear rate and temperature. Shear thinning behavior, typical of particulate polymer systems, has been observed irrespective of the testing temperatures. Magnetic properties and percolation behavior of the composites have also been evaluated.

  10. [Study on mercury re-emissions during fly ash utilization]. (United States)

    Meng, Yang; Wang, Shu-Xiao


    The amount of fly ash produced during coal combustion is around 400 million tons per year in China. About 65%-68% of fly ash is used in building material production, road construction, architecture and agriculture. Some of these utilization processes include high temperature procedures, which may lead to mercury re-emissions. In this study, experiments were designed to simulate the key process in cement production and steam-cured brick production. A temperature programmed desorption (TPD) method was used to study the mercury transformation in the major utilization processes. Mercury re-emission during the fly ash utilization in China was estimated based on the experimental results. It was found that mercury existed as HgCl2 (Hg2 Cl2), HgS and HgO in the fly ash. During the cement production process, more than 98% of the mercury in fly ash was re-emitted. In the steam-curing brick manufacturing process, the average mercury re-emission percentage was about 28%, which was dominated by the percentage of HgCl2 (Hg2 Cl2). It is estimated that the mercury re-emission during the fly ash utilization have increased from 4.07 t in 2002 to 9.18 t in 2008, of which cement industry contributes about 96.6%.

  11. Formation of Humic Substances in Weathered MSWI Bottom Ash

    Directory of Open Access Journals (Sweden)

    Haixia Zhang


    Full Text Available The study aimed at evaluating the humic substances (HSs content from municipal solid waste incinerator (MSWI bottom ash and its variation with time and the effect of temperature on HSs formation. The process suggested by IHSS was applied to extract HSs from two different bottom ash samples, and the extracted efficiency with NaOH and Na4P2O7 was compared. MSWI bottom ash samples were incubated at 37∘C and 50∘C for 1 year. HSs and nonhumic substances were extracted from the bottom ash sample with different incubated period by 0.1 M NaOH/Na4P2O7. Results show that the rate of humic acid formation increased originally with incubation time, reached a maximum at 12th week under 37∘C and at 18th week under 50∘C, and then decreased with time. More humic acid in MSWI bottom ash was formed under 50∘C incubated condition compared with that incubated under 37∘C. Also, the elemental compositions of HSs extracted from bottom ash are reported.


    Directory of Open Access Journals (Sweden)

    Jolanta Latosińska


    Full Text Available The study shows the results of zeolitization of municipal sewage sludge ash with the indirect fusion method followed by a hydrothermal method. The zeolitization of sewage sludge ash was conducted at the melting temperature of 550°C and the melting time of 60 minutes, crystallization temperatures of 60°C and 90°C, crystallization time of 6 hours and the SSA:NaOH ratio of 1:1.8; 1:1.4. The research of modified sewage sludge ashes included the observation of changes of ash particles surface and the identification of crystalized phases. The zeolitization of sewage sludge ash at the ratio of SSA:NaOH 1.0:1.4 did not cause the formation of zeolite phases. On the other hand, the zeolitization at the ratio of SSA:NaOH 1.0:1.8 resulted in the formation of desired zeolite phases such as zeolite Y (faujasite and hydroxysodalite. The presented method of sewage sludge ash zeolitization allows to obtain highly usable material. Synthesized zeolites may be used as adsorbents and ion exchangers. They can be potentially used to remove heavy metals as well as ammonia from water and wastewater.

  13. Effect of interfacial properties on mechanical stability of ash deposit

    Directory of Open Access Journals (Sweden)

    A. Ontiveros-Ortega


    Full Text Available The paper presents a study on the cohesion of volcanic ash particles using surface free energy determination and zeta potential analyses. This is a subject of great interest in physical volcanology, as many researches on volcanic particle aggregation are frequently reported. In this case, special attention is paid to the role of structural or hydration forces between hydrophilic surfaces, which are a consequence of the electron-donor/electron-acceptor character of the interface. From this point of view, the results are potentially interesting as they could give valuable insights into this process. The results are presented in terms of the total energy of interaction between dispersed particles, computed from the extended DLVO theory. Contributions to the total free energy of interaction were determined from the zeta potential and surface free energy of ash, measured under different experimental conditions. Two samples of basaltic volcanic ash (black and white with silica contents of 44% and 63% respectively are studied. The surface free energy and zeta potential were analysed for ashes immersed in different electrolytes (NaCl, CaCl2, FeCl3. The presence of electrolytes changes the surface properties of the solid materials. The analysis of total interaction energy between the ash particles in aqueous medium shows that soil cohesion strongly depends on ash surface properties, chemical nature, the adsorbed cation on the surface, and pH value.

  14. Damping properties of fly ash/epoxy composites

    Institute of Scientific and Technical Information of China (English)

    Jian Gu; Gaohui Wu; Xiao Zhao


    An inexpensive fly ash (FA), which is from a waste product, was employed to prepare fly ash/epoxy composites. The purpose of this study is to characterize the contributions of matrix viscoelasticity, hollow structure characteristic (porosity), and filler/matrix interface friction to the high vibration damping capacity of such composites. The damping properties of the composites were investigated in the temperature range of-40 to 150℃C and in the frequency range of 10 to 800 Hz by using a tension-compression mode. The results indicate that the peak value of damping loss factor (tanδ) for the fly ash/epoxy composites can reach 0.70-0.90 in test specification, and the attenuation of damping loss factor is inconspicuous with increasing frequency. In addition, scanning electron microscope (SEM) was used to observe the morphology of the fly ash as well as its distribution in the matrix, which will help to analyze the effect of fly ash on the damping properties of the fly ash/epoxy composites.

  15. The Mineral Transformation of Huainan Coal Ashes in Reducing Atmospheres

    Institute of Scientific and Technical Information of China (English)

    LI Han-xu; Yoshihiko Ninomiya; DONG Zhong-bing; ZHANG Ming-xu


    By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope (CCSEM),X-ray diffraction (XRD) and X-ray fluorescence (XRF), the ash composition and the mineral components of six typical Huainan coals of different origins were studied. The transformation of mineral matter at high temperatures was tracked by XRD in reducing conditions. The quartz phase decreased sharply and the anorthite content tended to increase at first and then decreased with increasing temperatures. The formed mullite phase reached a maximum at 1250 ℃ but showed a tendency of slow decline when the temperature was over 1250 ℃. The mullite formed in the heating process was the main reason of the high ash melting temperature of Huainan coals. Differences in peak intensity of mullite and anorthite reflected differences in phase concentration of the quenched slag fractions, which contributed to the differences in ash melting temperatures. The differences in the location of an amorphous hump maximum indicated differences of glass types which may affect ash melting temperatures. For Huainan coal samples with relatively high ash melting temperatures, the intensity of the diffraction lines for mullite under reducing condition is high while for the samples with relatively low ash melting temperature the intensity for anorthite is high.

  16. Use of FBC ash and ponded coal-ash in ready-mixed concrete[ACI SP-235

    Energy Technology Data Exchange (ETDEWEB)

    Naik, T.R.; Kraus, R.N.; Chun, Y.M. [Univ. of Wisconsin, Milwaukee, WI (United States). Center for By-Products Utilization; Botha, F.D. [Illinois Clean Coal Inst., Carterville, IL (United States)


    Clean coal ash waste from coal-fired power stations is currently under-utilized, as are control technologies for reducing SOx and NOx emissions resulting from fluidized bed combustion (FBC). FBC ash is produced by an FBC boiler in which the coal and limestone mixture is fluidized during the combustion process to allow removal of sulfur gases. This study was conducted to find practical solutions for using the waste product to address environmental concerns and the issue of reduced landfill space. In particular, the study focused on developing a manufacturing technology for the use of FBC and wet-collected, low-lime, coarse coal-ash (WA) in ready-mixed concrete. Nine concrete mixtures and test specimens were made at a ready-mixed concrete plant in Peoria, Illinois. The properties of fresh concrete were tested along with compressive strength, splitting-tensile strength, flexural strength and abrasion resistance for non-entrained, non-air-entrained with high-range water-reducing admixture (HRWRA), and air-entrained admixture (AEA) concrete. The percentage of FBC ash ranged from 22 to 45 per cent in the non-air-entrained concrete and 17 to 27 per cent in the concrete containing AEA. Resistance to salt-scaling of the AEA concrete mixtures exposed to deicing chemicals was also examined. The study showed that the use of normal dosages of AEA was not effective in concrete made with FBC ash. The results also indicated that non-air-entrained concrete mixtures could successfully incorporate up to 22 per cent FBC ash to cementitious material ratio (ash/cm) and a blend of 34 per cent FBC ash/cm and 5 per cent WA/aggregate. Up to 45 per cent FBC ash/cm and 5 per cent of WA/aggregate could also be used in non-air-entrained concrete mixtures using HRWRA for general concrete construction, as could concrete mixtures containing AEA incorporating up to 17 per cent FBC ash/cm with blends of 27 per cent FBC ash/cm and 5 per cent WA/aggregate. 17 refs., 2 tabs., 10 figs.

  17. What Controls the Sizes and Shapes of Volcanic Ash? Integrating Morphological, Textural and Geochemical Ash Properties to Decipher Eruptive Processes (United States)

    Liu, E. J.; Cashman, K. V.; Rust, A.


    Volcanic ash particles encompass a diverse spectrum of shapes as a consequence of differences in the magma properties and the magma ascent and eruption conditions. We show how the quantitative analysis of ash particle shapes can be a valuable tool for deciphering magma fragmentation and transport processes. Importantly, integrating morphological data with ash texture (e.g. bubble and crystal sizes) and dissolved volatile data provides valuable insights into the physical and chemical controls on the resulting ash deposit. To explore the influence of magma-water interaction (MWI) on fine ash generation, we apply this multi-component characterisation to tephra from the 2500BC Hverfjall Fires, Iceland. Here, coeval fissure vents spanned sub-aerial to shallow lacustrine environments. Differences in the size and morphology of pyroclasts thus reflect fragmentation mechanisms under different near-surface conditions. Using shape parameters sensitive to both particle roughness and internal vesicularity, we quantify the relative proportions of dense fragments, bubble shards, and vesicular grains from 2-D SEM images. We show that componentry (and particle morphology) varies as a function of grain size, and that this variation can be related back to the bubble size distribution. Although both magmatic and hydromagmatic deposits exhibit similar component assemblages, they differ in how these assemblages change with grain size. These results highlight the benefits of characterising ash deposits over a wide range of grain sizes, and caution against inferring fragmentation mechanism from a narrow grain size range. Elevated matrix glass S concentrations in hydromagmatic ash (600-1500 ppm) compared to those in magmatic ash and scoria lapilli (200-500 ppm) indicate interrupted vesiculation. In contrast to the subaerial 'dry' deposits, fragmentation during MWI likely occurred over a greater range of depths with quench rates sufficient to prevent post-fragmentation degassing. High

  18. Assessing the potential of coal ash and bagasse ash as inorganic amendments during composting of municipal solid wastes. (United States)

    Mohee, Romeela; Boojhawon, Anuksha; Sewhoo, Babita; Rungasamy, Selven; Somaroo, Geeta D; Mudhoo, Ackmez


    This study investigates the potential of incorporating inorganic amendments such as coal and bagasse ashes in different composting mixes. 10 different composting mixes were assessed as follows: A-20% bagasse ash (BA) with unsorted municipal solid wastes (UMSW); B-40% BA with UMSW; C-UMSW; D-20% BA with sorted municipal solid wastes (SMSW); E-40% BA with SMSW; F-SMSW; G-20% coal ash (CA) with UMSW; H-40% CA with UMSW; I-20% CA with SMSW and J-40% CA with SMSW. The composting processes were carried out in rotary drum composters. Composting mixes D, F, G and I achieved a temperature above 55 °C for at least 3 days, with the following peak temperatures: D-62 °C, F-57 °C, G-62 °C and I-58 °C. D resulted in the highest average net Volatile solids (VS) degradation of 68.6% and yielded the highest average volume reduction of 66.0%. The final compost from D, G, I, C and F were within range for electrical conductivities (EC) (794-1770 μS/cm) and pH (6.69-7.12). The ashes also helped in maintaining high average water holding capacities within the range of 183-217%. The C/N ratio of sorted wastes was improved by the addition of 20% coal ash and bagasse ash. Higher germination indices, above 0.8 were obtained for the ash-amended compost (D, G, I), indicating the feasibility and enhancement of using bagasse and coal ash as inorganic amendment in the composting process. Regarding heavy metals content, the chromium concentration for the composting mix G was found to be the highest whereas mixes D and I showed compliance with the MS (Mauritian Standards) 164 standards.

  19. Vegetation in the Flood Plain Adjacent to the Mississippi River between Cairo, Illinois, and St. Paul, Minnesota, and in the Flood Plain of the Illinois River between Grafton, Illinois, and Chicago, and the Possible Impacts That Will Result from the Construction of L & D 26 and the Associated Increase in Barge Traffic, (United States)


    and pecan ( Carya illinoensis ). In the southernmost region of the study area (i.e., Alexander and Union counties, Illinois), swamp cottonwood is a...ash (Fraxinus lanceolata), pecan ( Carya illinoensis ), box elder (Acer negundo), and red mulberry (Morus rubra). Shrubs occurring in the Silver Maple...americana), green ash (Fraxinus lanceolata), pecan ( Carya illinoensis ), sugarberry (Celtis laevigata), and red mulberry (Morus rubra). Also

  20. The effect of fly ash and coconut fibre ash as cement replacement materials on cement paste strength (United States)

    Bayuaji, R.; Kurniawan, R. W.; Yasin, A. K.; Fatoni, H. AT; Lutfi, F. M. A.


    Concrete is the backbone material in the construction field. The main concept of the concrete material is composed of a binder and filler. Cement, concrete main binder highlighted by environmentalists as one of the industry are not environmentally friendly because of the burning of cement raw materials in the kiln requires energy up to a temperature of 1450° C and the output air waste CO2. On the other hand, the compound content of cement that can be utilized in innovation is Calcium Hydroxide (CaOH), this compound will react with pozzolan material and produces additional strength and durability of concrete, Calcium Silicate Hydrates (CSH). The objective of this research is to explore coconut fibers ash and fly ash. This material was used as cement replacement materials on cement paste. Experimental method was used in this study. SNI-03-1974-1990 is standard used to clarify the compressive strength of cement paste at the age of 7 days. The result of this study that the optimum composition of coconut fiber ash and fly ash to substitute 30% of cement with 25% and 5% for coconut fibers ash and fly ash with similar strength if to be compared normal cement paste.

  1. Variability in radial sap flux density patterns and sapwood area among seven co-occurring temperate broad-leaved tree species. (United States)

    Gebauer, Tobias; Horna, Viviana; Leuschner, Christoph


    Forest transpiration estimates are frequently based on xylem sap flux measurements in the outer sections of the hydro-active stem sapwood. We used Granier's constant-heating technique with heating probes at various xylem depths to analyze radial patterns of sap flux density in the sapwood of seven broad-leaved tree species differing in wood density and xylem structure. Study aims were to (1) compare radial sap flux density profiles between diffuse- and ring-porous trees and (2) analyze the relationship between hydro-active sapwood area and stem diameter. In all investigated species except the diffuse-porous beech (Fagus sylvatica L.) and ring-porous ash (Fraxinus excelsior L.), sap flux density peaked at a depth of 1 to 4 cm beneath the cambium, revealing a hump-shaped curve with species-specific slopes. Beech and ash reached maximum sap flux densities immediately beneath the cambium in the youngest annual growth rings. Experiments with dyes showed that the hydro-active sapwood occupied 70 to 90% of the stem cross-sectional area in mature trees of diffuse-porous species, whereas it occupied only about 21% in ring-porous ash. Dendrochronological analyses indicated that vessels in the older sapwood may remain functional for 100 years or more in diffuse-porous species and for up to 27 years in ring-porous ash. We conclude that radial sap flux density patterns are largely dependent on tree species, which may introduce serious bias in sap-flux-derived forest transpiration estimates, if non-specific sap flux profiles are assumed.

  2. Element budgets of forest biomass combustion and ash fertilisation - a Danish case-study

    DEFF Research Database (Denmark)

    Ingerslev, Morten; Skov, Simon; Sevel, Lisbeth;


    Harvest of forest biomass for energy production may lead to a significant export of nutrients from the forest. Ash spreading and recycling of nutrients from wood chip combustion to the forest has come into focus as a means for counteracting the nutrient export. This study was carried out to examine...... the retention of various elements in the different ash fractions and utilise the nutrient recovery to evaluate the fertiliser quality of the examined ash. The mass and element flux of wood chips, bottom ash, cyclone fly ash and condensation sludge at Ebeltoft central heating plant was studied over a four day...... period in spring 2005. On average, 19 ton wood chips (dry weight) were combusted each day. The combustion of the wood chips produced 0.70% ash and sludge (dry weight). The ash and sludge dry matter was distributed as 81% fly ash, 16% bottom and residual grate ash and 3% sludge solid phase. Substantial...

  3. Characteristics of industrial and laboratory meat and bone meal ashes and their potential applications. (United States)

    Coutand, Marie; Cyr, Martin; Deydier, Eric; Guilet, Richard; Clastres, Pierre


    This paper reports the characterization of four meat and bone meal (MBM) ashes obtained from specific incineration (laboratory) and from co-incineration (industrial process). Three out of the four MBM ashes were mainly composed of calcium phosphates (hydroxyapatite and whitlockite). Their compositions (major and trace) were in the range for natural phosphate rocks. Trace element contents, including heavy metals, were below 0.6% and industrial ashes contained much more heavy metals than laboratory ash. The amounts of leached elements were low, especially for laboratory ash. According to the European classification of waste to be landfilled, the laboratory ash can be classified as an inert waste. Two industrial ashes are mostly inert. Only one ash is highly leachable and needs a stabilization treatment to be classified at least in the category of hazardous waste. It seems, from these results, that possibilities other than landfilling could be considered to give economic value to these ashes.

  4. Studies on Concrete Characteristic Strength Using Fly Ash And Rice Husk Ash

    Directory of Open Access Journals (Sweden)

    Khusbu Rajhans


    Full Text Available Through out the world, the most widely used construction material is concrete, commonly made by mixing Portland cement with sand, crushed rock, and water. As concrete is being widely used for the construction of most of the buildings, bridges etc, it has been labelled as the backbone to the infrastructure development of a nation. Currently our country is doing major work to improve and develop its infrastructure by constructing industrial and commercial projects and National Highways which creats major economic problem. At present about 120 million ton of cement is being produced in India every year. That much amount of cement is expected to reach close to 470 million ton by 2017[3].Though the production of cement is at comfortable level to meet, the rapidly increasing cost of production of cement is a matter of concern. Hence, currently the entire construction industry is in search of suitable and effective the waste product that would considerably minimize the use of cement and ultimately reduce the construction cost. Few of such products have already been identified like Rice Husk Ash (RHA, Fly Ash(FA, Silica Fume etc. Amongst them RHA is known to have good prospects in minimizing the usage of cement.

  5. Comparison of various bioassays for dioxins measurements in fuel gas, fly ash and bottom ash

    Energy Technology Data Exchange (ETDEWEB)

    Ota, S.; Kin-ichi, S. [Ministry of the Environment, Tokyo (Japan); Masatoshi, M.; Shin-ichi, S. [National Institute for Environmental Studies, Tsukuba (Japan)


    In Japan, the control standards for dioxins (PCDDs, PCDFs and Co-PCBs) in the emission gas, fly and bottom ashes from waste incinerators have been defined in the Law Concerning Special Measures against Dioxins (Dioxins Law). Based on the Dioxins law, an installation personnel of waste incinerators of specified facilities shall measure dioxins in the emission gas and fly and bottom ashes more than once every year followed by reporting the results to their prefectural governor. The present regulating procedure has been set to use high-resolution gas chromatography/ high-resolution mass spectrometry (HRGC/HRMS, hereafter GC/MS) systems to determine dioxin-concentrations. However, the GC/MS measurements are often money- and timeconsuming, since they need complicated steps for sample preparation, expensive equipments and highly skilled technicians. Therefore, it is of high priority to develop rapid and economical alternative methods to measure dioxins. Recently, various assays using biological reactions have drawn a high degree of attention as a candidate for alternative measurement methods of dioxins. During the past decade several studies demonstrated the utility of a chemical (GC/MS) and biological (bioassays/biomarkers) control of waste thermal recycling processes like pyrolysis or incineration treatment. In this paper, we report the results of our recent examinations on the possibility to apply various bioassays to supplementary methods for the present procedure.

  6. Strength of Ternary Blended Cement Sandcrete Containing Afikpo Rice Husk Ash and Saw Dust Ash

    Directory of Open Access Journals (Sweden)

    L. O. Ettu


    Full Text Available This work investigated the compressive strength of ternary blended cement sandcrete containing Afikpo rice husk ash (RHA and sawdust ash (SDA. 105 sandcrete cubes of 150mm x 150mm x 150mm were produced with OPC-RHA binary blended cement, 105 with OPC-SDA binary blended cement, and 105 with OPC-RHA-SDA ternary blended cement, each at percentage OPC replacement with pozzolan of 5%, 10%, 15%, 20%, and 25%. Three cubes for each percentage replacement of OPC with pozzolan and the control were tested for saturated surface dry bulk density and crushed to obtain their compressive strengths at 3, 7, 14, 21, 28, 50, and 90 days of curing. The 90-day strengths obtained from ternary blending of OPC with equal proportions of RHA and SDA were 11.80N/mm2for 5% replacement, 11.20N/mm2for 10% replacement, 10.60N/mm2for 15% replacement, 10.00N/mm2for 20% replacement, and 9.10N/mm2for 25% replacement, while that of the control was 10.90N/mm2. This suggests that very high sandcrete strength values could be obtained with OPCRHA-SDA ternary blended cement with richer mixes, high quality control, and longer days of hydration. Thus, OPC-RHA-SDA ternary blended cement sandcrete could be used for various civil engineering and building works, especially where early strength is not a major requirement.

  7. Influence of Coal Blending on Ash Fusibility in Reducing Atmosphere

    Directory of Open Access Journals (Sweden)

    Mingke Shen


    Full Text Available Coal blending is an effective way to organize and control coal ash fusibility to meet different requirements of Coal-fired power plants. This study investigates three different eutectic processes and explains the mechanism of how coal blending affects ash fusibility. The blended ashes were prepared by hand-mixing two raw coal ashes at five blending ratios, G:D = 10:90 (G10D90, G:D= 20:80 (G20D80, G:D = 30:70 (G30D70, G:D = 40:60 (G40D60, and G:D = 50:50 (G50D50. The samples were heated at 900 °C, 1000 °C, 1100 °C, 1200 °C, and 1300 °C in reducing atmosphere. XRD and SEM/EDX were used to identify mineral transformations and eutectic processes. The eutectic processes were finally simulated with FactSage. Results show that the fusion temperatures of the blended ashes initially decrease and then increase with the blending ratio, a trend that is typical of eutectic melting. Eutectic phenomena are observed in D100, G10D90, and G30D70 in different degrees, which do not appear in G100 and G50D50 for the lack of eutectic reactants. The main eutectic reactants are gehlenite, magnetite, merwinite, and diopside. The FactSage simulation results show that the content discrepancy of merwinite and diopside in the ashes causes the inconsistent eutectic temperatures and eutectic degrees, in turn decrease the fusion temperature of the blended ash and then increase them with the blending ratio.

  8. Size fraction characterization of highly-calcareous fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Itskos, Grigorios; Koukouzas, Nikolaos [Institute for Solid Fuels Technology and Applications, Centre for Research and Technology Hellas, 357-359 Mesogeion Avenue, GR-152 31, Halandri, Athens (Greece); Itskos, Socrates [Department of Chemical Technology and the Environment, Steam Electric Station of Amynteon-Filotas, Public Power Corporation of Greece, GR-532 00, Amynteon (Greece)


    The chemical and mineralogical composition of lignite fly ash (FA) varies as a function of the prevalent conditions in both the processes of power production and lignite mining. The differentiation of the qualitative and quantitative composition of the highly-calcareous lignite fly ash, as a function of its particle size distribution, is verified in this paper. According to the results of the conducted research, a fine-grained fraction of considerable amount presents properties that obstruct the sustainable exploitation of calcareous lignite fly ash in cement industry applications. On the other hand, the same grain fraction (because of its hydraulic properties) can be utilized in other sort of applications, based on different criteria, i.e. in road constructions. The coarse-grained fraction (which reflects a low proportion to the total fly ash output) presents the same undesired characteristics as well. Rather, the intermediate grain fraction (75-150 {mu}m) presents the highly desirable properties when fly ash is utilized as a pozzolanic additive. In addition, the mechanism of the formation of the intermediate grain fraction strongly prevents the factors that cause the variation of fly ash-quality. It is therefore the optimum part of the whole amount of lignite FA, to be utilized as additive in cement manufacturing. The outcomes of this paper will hopefully contribute towards the crucial goal of the expansion of the utilization of calcareous lignite fly ash by proposing a more effective way of using this material, basically by taking advantage of its fundamental chemical and mineralogical properties. (author)

  9. Precious Metals in Municipal Solid Waste Incineration Bottom Ash

    Energy Technology Data Exchange (ETDEWEB)

    Muchova, Lenka; Bakker, Erwin; Rem, Peter [Faculty of Civil Engineering and Geosciences, Materials and Environment, TU Delft (Netherlands)], E-mail: P.C.REM@TUDELFT.NL


    Municipal solid waste incineration (MSWI) bottom ash contains economically significant levels of silver and gold. Bottom ashes from incinerators at Amsterdam and Ludwigshafen were sampled, processed, and analyzed to determine the composition, size, and mass distribution of the precious metals. In order to establish accurate statistics of the gold particles, a sample of heavy non-ferrous metals produced from 15 tons of wet processed Amsterdam ash was analyzed by a new technology called magnetic density separation (MDS). Amsterdam's bottom ash contains approximately 10 ppm of silver and 0.4 ppm of gold, which was found in particulate form in all size fractions below 20 mm. The sample from Ludwigshafen was too small to give accurate values on the gold content, but the silver content was found to be identical to the value measured for the Amsterdam ash. Precious metal value in particles smaller than 2 mm seems to derive mainly from waste of electrical and electronic equipment (WEEE), whereas larger precious metal particles are from jewelry and constitute the major part of the economic value. Economical analysis shows that separation of precious metals from the ash may be viable with the presently high prices of non-ferrous metals. In order to recover the precious metals, bottom ash must first be classified into different size fractions. Then, the heavy non-ferrous (HNF) metals should be concentrated by physical separation (eddy current separation, density separation, etc.). Finally, MDS can separate gold from the other HNF metals (copper, zinc). Gold-enriched concentrates can be sold to the precious metal smelter and the copper-zinc fraction to a brass or copper smelter.

  10. Effect of coal ash disposal upon an unconfined alluvial system

    Energy Technology Data Exchange (ETDEWEB)

    Shergill, B.S.; Sendlein, L.V.A. (Univ. of Kentucky, Lexington, KY (United States). Dept. of Geological Sciences); Dinger, J.S. (Univ. of Kentucky, Lexington, KY (United States). Kentucky Geological Survey)


    Fly and bottom ash from coal combustion has been disposed in four ash ponds in an alluvial valley. Three of the ash ponds are receiving ash and one was filled and closed. Twenty eight monitoring wells ranging in depth from 10 feet to 65 feet have been installed at the site to study groundwater flow and chemistry. Hydraulic heads are influenced by the stage of the Kentucky River, and the flow direction is vertical below the ash ponds and predominantly horizontal a short distance from the pond all the way to the river. Three different groundwater flow zones were observed and have unique water chemistry. The deep zone (near bedrock) has a low Eh (< [minus]80), and high concentration of Fe, ammonia nitrogen, below detection sulfate values (< 5 mg/l) and trace metals. The age of the deep groundwater as determined by tritium analyses is between 20 to 30 years old (5.68 TU). The intermediate groundwater zone (from ash pond) has relatively higher Eh (> 100) and lower concentrations of Fe and ammonia nitrogen, median sulfate concentration (114 mg/l), and arsenic is below detection limits. The shallow groundwater zone is through the closed out ash point and has higher concentrations of nearly all cations and anions, including sulfate (888 mg/l) and arsenic (exists as arsenite) at concentration of 0.9 mg/l, low Eh (< [minus]100), and high pH. When shallow flow enters the alluvium, the sulfate are attenuated by sulfate reduction and this results in high bicarbonate values. Saturation indices (SI) as calculated by the geochemical model, MINTEQA2, indicate that deep and intermediate groundwater are unsaturated and shallow groundwater is at or near equilibrium with respect to calcite, dolomite, and gypsum.

  11. Impact of coal fly ash addition on ash transformation and deposition in a full-scale wood suspension-firing boiler

    DEFF Research Database (Denmark)

    Wu, Hao; Bashir, Muhammad Shafique; Jensen, Peter Arendt;


    Ash transformation and deposition during pulverized wood combustion in a full-scale power plant boiler of 800 MWth were studied with and without the addition of coal fly ash. The transient ash deposition behavior was characterized by using an advanced deposit probe system at two boiler locations...... constant after a few hours. The formed deposits, especially those at the location with low flue gas temperatures, contained a considerable amount of K2SO4, KCl, and KOH/K2CO3. With the addition of a large amount (about 4 times of the mass flow of wood ash) of coal fly ash to the boiler, these alkali...

  12. Full-scale ash deposition measurements at Avedøre Power Plant unit 2 during suspension-firing of wood with and without coal ash addition

    DEFF Research Database (Denmark)

    Wu, Hao; Shafique Bashir, Muhammad; Jensen, Peter Arendt

    along with the fly ash and bottom ash from the plant were characterized extensively by SEM-EDS, ICP-OES/IC and XRD. Based on the results from the present work, the deposit formation and shedding mechanisms under different operational conditions were proposed and discussed. The influence of coal ash...... addition on deposit formation during wood suspension-firing at AVV2 was evaluated. It was revealed that the addition of coal fly ash could significantly influence the ash deposition/shedding behaviors and the deposit properties. The effect was evident at both measurement locations. At the location...

  13. Speciation of Chromium in Bottom Ash Obtained by the Incineration of the Leather Waste Shavings

    Directory of Open Access Journals (Sweden)

    k. louhab


    Full Text Available The evolution of bottom ash morphology and chromium metals behavior during incineration of a leather waste shavings at different incineration temperature have been studied. The Cr, Ca, Mg, Cl rates in bottom ashes, flay ashes and emitted gases in different incineration temperature of the tannery wastes are also determined. The morphology of the bottom ashes obtained by incineration at different temperature from the leather waste shavings was examined by MEB. The result show that the temperature and the length of incineration influence on the structure of the bottom ash and on the chromium in the bottom ash.

  14. Occurrence of volcanic ash in the Quaternary alluvial deposits, lower Narmada basin, western India

    Indian Academy of Sciences (India)

    Rachna Raj


    This communication reports the occurrence of an ash layer intercalated within the late Quaternary alluvial succession of the Madhumati River, a tributary of the lower Narmada River. Petrographic, morphological and chemical details of glass shards and pumice fragments have formed the basis of this study. The ash has been correlated with the Youngest Toba Tuff. The finding of ash layer interbedded in Quaternary alluvial sequences of western Indian continental margin is significant, as ash being datable material, a near precise time-controlled stratigraphy can be interpreted for the Quaternary sediments of western India. The distant volcanic source of this ash requires a fresh re-assessment of ash volume and palaeoclimatic interpretations.

  15. The Effects of Bottom Ash from MSWI Used as Mineral Additions in Concrete

    Directory of Open Access Journals (Sweden)

    Che Amat Roshazita


    Full Text Available Municipal solid waste incinerators (MSWI produce by products which can be classified as bottom and fly ashes. The bottom ash accounts for 85–90 % of the solid product resulting from MSW combustion. The aimed of the present work is to study the effect of replacing partial of bottom ash were manufactured. Fresh and hardened properties of the concrete were compared in order to study the suitable cement-bottom ash replacement. Bottom ash was found to have some reactivity, but without greatly affecting the hydration process of OPC at 10 % replacement. However at more than 10 % replacement, the addition of bottom ash greatly affected strength.

  16. A Comparative study Of Catalityc Activity Of Heterogeneous Base Of Banana Stem Ash And Fly Ash On Production Of Biodiesel Byultrasonic

    Directory of Open Access Journals (Sweden)



    Full Text Available Abstract The use of heterogeneous catalysts in the production of biodiesel provides many advantages due to heterogeneous catalysts can be easily separated from the product so that it can be reused. This research using heterogeneous catalysts derived from natural materials namely banana stem ash and coal fly ash containing alkali and alkaline earth elements. The preparation of catalyst from banana stem ash and coal fly ash used activator KOH 1.9 N and impregnation with KNO3 15 and then heated to a temperature of 550 0C for 3 hours. Results of preparation banana stem ash contains potassium of 36.52 and surface area of 41.901 m2g. This work presents the effect of ultrasonic assisted of waste cooking oil with methanol as solvent using banana stem ash and coal fly ash as catalyst. The diameter of catalyst particles of banana stem ash and coal fly ash varied at 50 100 150 200 and 250 mesh. The transesterification reaction was performed in the presence of ultrasonic operating frequency constant at 40 kHz methanol molar ratio to oil of 9 1 and reaction time of 30 minutes. The methyl ester biodiesel content of product was 93.26 of banana stems ash and 57 of coal fly ash respectively. The physical property was compared with the National Indonesia Standard SNI 2006 with a density viscosity cloud point flash point and cetane number.

  17. Investigation of the chemical composition of ash generated from Kosovo lignite and the possibility for biological land reclamation on ash dumps

    Energy Technology Data Exchange (ETDEWEB)

    Urosevic, D.; Filipovic, R. [Mining Institute Belgrade, Belgrade (Yugoslavia)


    This paper presents the results of investigation of the chemical composition and other properties of ash generated in the coal combustion process in the coal-fired power plants Kosovo, in order to determine the possibilities for biological land reclamation on ash dumps and other degraded soil surfaces. It was established that a certain chemical composition of ash has a beneficial effect on biological land reclamation of ash dumps, thus protecting the environment (i.e. the area surrounding the ash dumps), against pollution. It was concluded that, because of the high percentage of calcium and other earth-alkaline and toxic elements, the ash should not be used as substitution for agricultural production. Ash dumps in Kosovo are not so susceptible to erosion since CaO{sub 3} acts as a binding component. 22 refs., 7 tabs.

  18. Models of ash-laden intrusions in a stratified atmosphere (United States)

    Hogg, Andrew; Johnson, Chris; Sparks, Steve; Huppert, Herbert; Woodhouse, Mark; Phillips, Jeremy


    Recent volcanic eruptions and the associated dispersion of ash through the atmosphere have led to widespread closures of airspace, for example the 2010 eruption of Eyjafjallajokull and 2011 eruption of Puyehue-Cordón Caulle. These episodes bring into sharp focus the need to predict quantitatively the transport and deposition of fine ash and in particular, its interaction with atmospheric wind. Many models of this process are based upon capturing the physics of advection with the wind, turbulence-induced diffusion and gravitational settling. Buoyancy-induced processes, associated with the density of the ash cloud and the background stratification of the atmosphere, are neglected and it is this issue that we address in this contribution. In particular, we suggest that the buoyancy-induced motion may account for the relatively thin distal ash layers that have been observed in the atmosphere and their relatively weak cross-wind spreading. We formulate a new model for buoyancy-driven spreading in the atmosphere in which we treat the evolving ash layer as relatively shallow so that its motion is predominantly horizontal and the pressure locally hydrostatic. The motion is driven by horizontal pressure gradients along with interfacial drag between the flowing ash layer and the surrounding atmosphere. Ash-laden fluid is delivered to this intrusion from a plume source and has risen through the atmosphere to its height of neutral buoyancy. The ash particles are then transported horizontally by the intrusion and progressively settle out of it to sediment through the atmosphere and form the deposit on the ground. This model is integrated numerically and analysed asymptotically in various regimes, including scenarios in which the atmosphere is quiescent and in which there is a sustained wind. The results yield predictions for the variation of the thickness of the intrusion with distance from the source and for how the concentration of ash is reduced due to settling. They

  19. Hierarchical zeolites from class F coal fly ash (United States)

    Chitta, Pallavi

    Fly ash, a coal combustion byproduct is classified as types class C and class F. Class C fly ash is traditionally recycled for concrete applications and Class F fly ash often disposed in landfills. Class F poses an environmental hazard due to disposal and leaching of heavy metals into ground water and is important to be recycled in order to mitigate the environmental challenges. A major recycling option is to reuse the fly ash as a low-cost raw material for the production of crystalline zeolites, which serve as catalysts, detergents and adsorbents in the chemical industry. Most of the prior literature of fly ash conversion to zeolites does not focus on creating high zeolite surface area zeolites specifically with hierarchical pore structure, which are very important properties in developing a heterogeneous catalyst for catalysis applications. This research work aids in the development of an economical process for the synthesis of high surface area hierarchical zeolites from class F coal fly ash. In this work, synthesis of zeolites from fly ash using classic hydrothermal treatment approach and fusion pretreatment approach were examined. The fusion pretreatment method led to higher extent of dissolution of silica from quartz and mullite phases, which in turn led to higher surface area and pore size of the zeolite. A qualitative kinetic model developed here attributes the difference in silica content to Si/Al ratio of the beginning fraction of fly ash. At near ambient crystallization temperatures and longer crystallization times, the zeolite formed is a hierarchical faujasite with high surface area of at least 360 m2/g. This work enables the large scale recycling of class F coal fly ash to produce zeolites and mitigate environmental concerns. Design of experiments was used to predict surface area and pore sizes of zeolites - thus obviating the need for intense experimentation. The hierarchical zeolite catalyst supports tested for CO2 conversion, yielded hydrocarbons

  20. Study on the Volatility of Cesium in Dry Ashing Pretreatment and Dissolution of Ash by Microwave Digestion System - 13331

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Kwang-Soon; Lee, Chang Heon; Ahn, Hong-Joo; Park, Yong Joon; Song, Kyuseok [Nuclear Chemistry Research Division, Korea Atomic Energy Research Institute, Daedeok-daero 989-111, Yuseong-gu, Daejeon, 305-353 (Korea, Republic of)


    Based on the regulation of the activity concentration of Cs-137, Co-58, Co-60, Fe-55, Ni-59, Ni-63, Sr-90, Nb-94, and Tc-99, and the total alpha from the radioactive waste acceptance criteria, the measurement of the activity concentration of these nuclides in low and intermediate levels of radioactive waste such as in paper, cotton, vinyl and plastic samples was investigated. A dry ashing method was applied to obtain a concentration effect of the samples. Owing to the temperature dependence of the volatility for cesium, the temperature of 300 to 650 deg. C was examined. It was found that 450 deg. C is the optimum dry ashing temperature. After dry ashing, the produced ash was dissolved with HNO{sub 3}, HCl, and HF by a high-performance microwave digestion system. The ash sample, for the most part, was completely dissolved with 10 mL of HNO{sub 3}, 4 mL of HCl, and 0.25 mL of HF by a high-performance microwave digestion system using a nova high temperature rotor at 250 deg. C for 90 min until reaching 0.2 g. To confirm the reliability of cesium loss after the performance of the dry ashing procedure, a cesium standard solution for AAS and a Cs-137 standard solution for gamma spectrometry were added to a paper towel or a planchet of stainless steel, respectively. Cesium was measured by AAS, ICP-MS, and gamma spectrometry. The volatility of cesium did not occur until 450 deg. C ashing. (authors)

  1. Mercury capture by selected Bulgarian fly ashes: Influence of coal rank and fly ash carbon pore structure on capture efficiency (United States)

    Kostova, I.J.; Hower, J.C.; Mastalerz, Maria; Vassilev, S.V.


    Mercury capture by fly ash C was investigated at five lignite- and subbituminous-coal-burning Bulgarian power plants (Republika, Bobov Dol, Maritza East 2, Maritza East 3, and Sliven). Although the C content of the ashes is low, never exceeding 1.6%, the Hg capture on a unit C basis demonstrates that the low-rank-coal-derived fly ash carbons are more efficient in capturing Hg than fly ash carbons from bituminous-fired power plants. While some low-C and low-Hg fly ashes do not reveal any trends of Hg versus C, the 2nd and, in particular, the 3rd electrostatic precipitator (ESP) rows at the Republika power plant do have sufficient fly ash C range and experience flue gas sufficiently cool to capture measurable amounts of Hg. The Republika 3rd ESP row exhibits an increase in Hg with increasing C, as observed in other power plants, for example, in Kentucky power plants burning Appalachian-sourced bituminous coals. Mercury/C decreases with an increase in fly ash C, suggesting that some of the C is isolated from the flue gas stream and does not contribute to Hg capture. Mercury capture increases with an increase in Brunauer-Emmett-Teller (BET) surface area and micropore surface area. The differences in Hg capture between the Bulgarian plants burning low-rank coal and high volatile bituminous-fed Kentucky power plants suggests that the variations in C forms resulting from the combustion of the different ranks also influence the efficiency of Hg capture. ?? 2010 Elsevier Ltd.

  2. AATSR Based Volcanic Ash Plume Top Height Estimation (United States)

    Virtanen, Timo H.; Kolmonen, Pekka; Sogacheva, Larisa; Sundstrom, Anu-Maija; Rodriguez, Edith; de Leeuw, Gerrit


    The AATSR Correlation Method (ACM) height estimation algorithm is presented. The algorithm uses Advanced Along Track Scanning Radiometer (AATSR) satellite data to detect volcanic ash plumes and to estimate the plume top height. The height estimate is based on the stereo-viewing capability of the AATSR instrument, which allows to determine the parallax between the satellite's nadir and 55◦ forward views, and thus the corresponding height. AATSR provides an advantage compared to other stereo-view satellite instruments: with AATSR it is possible to detect ash plumes using brightness temperature difference between thermal infrared (TIR) channels centered at 11 and 12 μm. The automatic ash detection makes the algorithm efficient in processing large quantities of data: the height estimate is calculated only for the ash-flagged pixels. Besides ash plumes, the algorithm can be applied to any elevated feature with sufficient contrast to the background, such as smoke and dust plumes and clouds. The ACM algorithm can be applied to the Sea and Land Surface Temperature Radiometer (SLSTR), scheduled for launch at the end of 2015.

  3. Sorbents for CO2 capture from high carbon fly ashes. (United States)

    Maroto-Valer, M Mercedes; Lu, Zhe; Zhang, Yinzhi; Tang, Zhong


    Fly ashes with high-unburned-carbon content, referred to as fly ash carbons, are an increasing problem for the utility industry, since they cannot be marketed as a cement extender and, therefore, have to be disposed. Previous work has explored the potential development of amine-enriched fly ash carbons for CO2 capture. However, their performance was lower than that of commercially available sorbents, probably because the samples investigated were not activated prior to impregnation and, therefore, had a very low surface area. Accordingly, the work described here focuses on the development of activated fly ash derived sorbents for CO2 capture. The samples were steam activated at 850 degrees C, resulting in a significant increase of the surface area (1075 m2/g). The activated samples were impregnated with different amine compounds, and the resultant samples were tested for CO2 capture at different temperatures. The CO2 adsorption of the parent and activated samples is typical of a physical adsorption process. The impregnation process results in a decrease of the surface areas, indicating a blocking of the porosity. The highest adsorption capacity at 30 and 70 degrees C for the amine impregnated activated carbons was probably due to a combination of physical adsorption inherent from the parent sample and chemical adsorption of the loaded amine groups. The CO2 adsorption capacities for the activated amine impregnated samples are higher than those previously published for fly ash carbons without activation (68.6 vs. 45 mg CO2/g sorbent).

  4. Evaluation and Treatment of Coal Fly Ash for Adsorption Application

    Directory of Open Access Journals (Sweden)

    Samson Oluwaseyi BADA

    Full Text Available Many researchers had investigated fly ash as an adsorbent for the uptake of organic compounds from petrochemical waste effluents. The availability, inexpensive and its adsorption characteristic had made it an alternative media for the removal of organic compounds from aqueous solution. The physical property of South African Coal Fly Ash (SACFA was investigated to determine its adsorption capability and how it can be improved. Chemical treatment using 1M HCl solution in the ratio of (1 g fly ash to (2 ml of acid was used and compared with untreated heat-treated samples. The chemically treated fly ash has a higher specific surface area of 5.4116 m2/g than the heat-treated fly ash with 2.9969 m2/g. More attention had to be given to the utilization of SACFA for the treatment of wastewaters containing organic compounds through the application of Liquid phase adsorption process that was considered as an inexpensive and environmentally friendly technology.

  5. Optimising Ambient Setting Bayer Derived Fly Ash Geopolymers

    Directory of Open Access Journals (Sweden)

    Evan Jamieson


    Full Text Available The Bayer process utilises high concentrations of caustic and elevated temperature to liberate alumina from bauxite, for the production of aluminium and other chemicals. Within Australia, this process results in 40 million tonnes of mineral residues (Red mud each year. Over the same period, the energy production sector will produce 14 million tonnes of coal combustion products (Fly ash. Both industrial residues require impoundment storage, yet combining some of these components can produce geopolymers, an alternative to cement. Geopolymers derived from Bayer liquor and fly ash have been made successfully with a compressive strength in excess of 40 MPa after oven curing. However, any product from these industries would require large volume applications with robust operational conditions to maximise utilisation. To facilitate potential unconfined large-scale production, Bayer derived fly ash geopolymers have been optimised to achieve ambient curing. Fly ash from two different power stations have been successfully trialled showing the versatility of the Bayer liquor-ash combination for making geopolymers.

  6. Flowable Backfill Materials from Bottom Ash for Underground Pipeline

    Directory of Open Access Journals (Sweden)

    Kyung-Joong Lee


    Full Text Available The purpose of this study was to investigate the relationship between strength and strain in manufacturing controlled low strength materials to recycle incineration bottom ash. Laboratory tests for controlled low strength materials with bottom ash and recycled in-situ soil have been carried out. The optimum mixing ratios were 25%–45% of in-situ soil, 30% of bottom ash, 10%–20% of fly ash, 0%–3% of crumb rubber, 3% of cement, and 22% of water. Each mixture satisfied the standard specifications: a minimum 20 cm of flowability and 127 kPa of unconfined compressive strength. The average secant modulus (E50 was (0.07–0.08 qu. The ranges of the internal friction angle and cohesion for mixtures were 36.5°–46.6° and 49.1–180 kPa, respectively. The pH of all of the mixtures was over 12, which is strongly alkaline. Small-scale chamber tests for controlled low strength materials with bottom ash and recycled in-situ soil have been carried out. Vertical deflection of 0.88–2.41 mm and horizontal deflection of 0.83–3.72 mm were measured during backfilling. The vertical and horizontal deflections of controlled low strength materials were smaller than that of sand backfill.

  7. Bacterial Treatment and Metal Characterization of Biomedical Waste Ash

    Directory of Open Access Journals (Sweden)

    Shelly Heera


    Full Text Available Biomedical waste ash generated due to the incineration of biomedical waste contains large amounts of heavy metals and polycyclic aromatic hydrocarbons (PAHs, which is disposed of in regular landfills, and results in unfavorable amounts of hazardous materials seeping into the ground and may pollute surface water and groundwater. Therefore, it is essential to remove the toxicity of ash before disposal into landfills or reutilization. Environmental characteristic analysis of BMW ash showed increased hardness (1320 mg/L and chloride (8500 mg/L content in leachate compared to World Health Organization (WHO and Environment Protection Agency (EPA guidelines for drinking water (hardness, 300 mg/L; chloride, 250 mg/L. The alkalinity and pH of the ash leachate were 400 mg/L and 8.35, respectively. In this paper, study was carried out to investigate the metal tolerance level of bacterial isolates isolated from soil. The isolate Bacillus sp. KGMDI can tolerate up to 75 mg/L of metal concentration (Mn, Mo, Cr, Fe, Cu, and Zn in enriched growth medium. This shows that the isolated culture is capable of growing in presence of high concentration of heavy metals and acts as potential biological tool to reduce the negative impact of BMW ash on the environment during landfilling.

  8. Recycling Jorf Lasfar fly ash as an additive to cement

    Directory of Open Access Journals (Sweden)

    Hamadi A


    Full Text Available Recycling fly ash is a good example of valorization of waste. It gives a solution the environmental problem by avoiding land filling, and reducing CO2 emission in the atmosphere. In this work we studied the physical-chemical characteristics of Jorf Lasfar fly ash. The parameters investigated were particle size, density, specific surface Blaine, chemical and mineralogical compositions. The techniques used are scanning electronic microscope (SEM, transmission electronic microscope (TEM, X-rays fluorescence (XRF, X-rays diffraction (XRD and atomic spectrometry emission coupled with inductive plasma ICP. We also conducted a study on the mechanical behavior of type CPJ45 cements produced from a combined grinding of clinker, limestone and gypsum. The substitution of a portion of the clinker by different percentages of fly ash was conducted. We noticed that the compression and bending resistances for these mixtures went through a maximum at 28 days with the addition of 7% (by mass of ash. This result showed that the mineral and chemical compositions of this ash conferred a Pozzoulanic power to the cement studied.

  9. Interaction mechanisms of organic contaminants with burned straw ash charcoal

    Institute of Scientific and Technical Information of China (English)

    Wenhai Huang; Baoliang Chen


    Black carbons (e.g.,charcoal) have a great impact on the transport of organic contaminants in soil and water because of its strong affinity and ubiquity in the environment.To further elucidate their interaction mechanism,sorption of polar (p-nitrotoluene,m-dinitrobenzene and nitrobenzene) and nonpolar (naphthalene) aromatic contaminants to burned straw ash charcoal under different de-ashed treatments were investigated.The sorption isotherms fitted well with Freundlich equation,and the Freundlich N values were all around 0.31-0.38,being independent of the sorbate properties and sorbent types.After sequential removal of ashes by acid treatments (HCl and HCl-HF),both adsorption and partition were enhanced due to the enrichment of charcoal component.The separated contribution of adsorption and partition to total sorption were quantified.The effective carbon content in ash charcoal functioned as adsorption sites,partition phases,and hybrid regions with adsorption and partition were conceptualized and calculated.The hybrid regions increased obviously after de-ashed treatment.The linear relationships of Freundlich N values with the charring-temperature of charcoal or biochar (the charred byproduct in biomass pyrolysis) were observed based on the current study and the cited publications which included 15 different temperatures (100-850℃),10 kinds of precursors of charcoal/biochar,and 10 organic sorbates.

  10. Use of sugarcane straw ash for zeolite synthesis

    Directory of Open Access Journals (Sweden)

    Denise Alves Fungaro, Thais Vitória da Silva Reis


    Full Text Available The amount of biomass combustion residue is growing nowadays due to constant increasing demands of biomass utilization. The biomass ash produced currently is disposed on agricultural fields. The presence of metals, chlorine, sulphur and other species may have significant impacts on soils and the recycling of soil nutrient. The main challenge is related to the increase of possible applications of this byproduct. Sugarcane straw ash (SCSA was used in a study on synthesis of zeolitic material by alkaline conventional hydrothermal treatment. Different experimental conditions, such as, reaction time, alkali hydroxide concentration and liquid/solid ratio were studied. Raw ash material and synthesis products were characterized by X-Ray Fluorescence, Fourier transform infrared spectroscopy powder, X-ray diffraction, cation exchange capacity and scanning electron microscopic. The presence of zeolite hydroxysodalite confirms successful conversion of native SCSA into zeolitic material. Sugarcane straw ash utilization minimizes the environmental impact of disposal problems and further appears as an alternative for the future sustainable large-scale management of biomass ash.

  11. Interaction mechanisms of organic contaminants with burned straw ash charcoal. (United States)

    Huang, Wenhai; Chen, Baoliang


    Black carbons (e.g., charcoal) have a great impact on the transport of organic contaminants in soil and water because of its strong affinity and ubiquity in the environment. To further elucidate their interaction mechanism, sorption of polar (p-nitrotoluene, m-dinitrobenzene and nitrobenzene) and nonpolar (naphthalene) aromatic contaminants to burned straw ash charcoal under different de-ashed treatments were investigated. The sorption isotherms fitted well with Freundlich equation, and the Freundlich N values were all around 0.31-0.38, being independent of the sorbate properties and sorbent types. After sequential removal of ashes by acid treatments (HCl and HCl-HF), both adsorption and partition were enhanced due to the enrichment of charcoal component. The separated contribution of adsorption and partition to total sorption were quantified. The effective carbon content in ash charcoal functioned as adsorption sites, partition phases, and hybrid regions with adsorption and partition were conceptualized and calculated. The hybrid regions increased obviously after de-ashed treatment. The linear relationships of Freundlich N values with the charring-temperature of charcoal or biochar (the charred byproduct in biomass pyrolysis) were observed based on the current study and the cited publications which included 15 different temperatures (100-850 degrees C), 10 kinds of precursors of charcoal/biochar, and 10 organic sorbates.

  12. Workability and strength of lignite bottom ash geopolymer mortar. (United States)

    Sathonsaowaphak, Apha; Chindaprasirt, Prinya; Pimraksa, Kedsarin


    In this paper, the waste lignite bottom ash from power station was used as a source material for making geopolymer. Sodium silicate and sodium hydroxide (NaOH) were used as liquid for the mixture and heat curing was used to activate the geopolymerization. The fineness of bottom ash, the liquid alkaline/ash ratio, the sodium silicate/NaOH ratio and the NaOH concentration were studied. The effects of the additions of water, NaOH and napthalene-based superplasticizer on the workability and strength of the geopolymer mortar were also studied. Relatively high strength geopolymer mortars of 24.0-58.0 MPa were obtained with the use of ground bottom ash with 3% retained on sieve no. 325 and mean particle size of 15.7 microm, using liquid alkaline/ash ratios of 0.429-0.709, the sodium silicate/NaOH ratios of 0.67-1.5 and 7.5-12.5M NaOH. The incorporation of water improved the workability of geopolymer mortar more effectively than the use of napthalene-based superplasticizer with similar slight reduction in strengths. The addition of NaOH solution slightly improves the workability of the mix while maintaining the strength of the geopolymer mortars.


    Energy Technology Data Exchange (ETDEWEB)

    David J. Hassett; Loreal V. Heebink


    The Minnesota Pollution Control Agency (MPCA) approved the use of coal ash in soil stabilization, indicating that environmental data needed to be generated. The overall project goal is to evaluate the potential for release of constituents into the environment from ash used in soil stabilization projects. Supporting objectives are: (1) To ensure sample integrity through implementation of a sample collection, preservation, and storage protocol to avoid analyte concentration or loss. (2) To evaluate the potential of each component (ash, soil, water) of the stabilized soil to contribute to environmental release of analytes of interest. (3) To use laboratory leaching methods to evaluate the potential for release of constituents to the environment. (4) To facilitate collection of and to evaluate samples from a field runoff demonstration effort. The results of this study indicated limited mobility of the coal combustion fly ash constituents in laboratory tests and the field runoff samples. The results presented support previous work showing little to negligible impact on water quality. This and past work indicates that soil stabilization is an environmentally beneficial CCB utilization application as encouraged by the U.S. Environmental Protection Agency. This project addressed the regulatory-driven environmental aspect of fly ash use for soil stabilization, but the demonstrated engineering performance and economic advantages also indicate that the use of CCBs in soil stabilization can and should become an accepted engineering option.

  14. MSWI boiler fly ashes: magnetic separation for material recovery. (United States)

    De Boom, Aurore; Degrez, Marc; Hubaux, Paul; Lucion, Christian


    Nowadays, ferrous materials are usually recovered from Municipal Solid Waste Incineration (MSWI) bottom ash by magnetic separation. To our knowledge, such a physical technique has not been applied so far to other MSWI residues. This study focuses thus on the applicability of magnetic separation on boiler fly ashes (BFA). Different types of magnet are used to extract the magnetic particles. We investigate the magnetic particle composition, as well as their leaching behaviour (EN 12457-1 leaching test). The magnetic particles present higher Cr, Fe, Mn and Ni concentration than the non-magnetic (NM) fraction. Magnetic separation does not improve the leachability of the NM fraction. To approximate industrial conditions, magnetic separation is also applied to BFA mixed with water by using a pilot. BFA magnetic separation is economically evaluated. This study globally shows that it is possible to extract some magnetic particles from MSWI boiler fly ashes. However, the magnetic particles only represent from 23 to 120 g/kg of the BFA and, though they are enriched in Fe, are composed of similar elements to the raw ashes. The industrial application of magnetic separation would only be profitable if large amounts of ashes were treated (more than 15 kt/y), and the process should be ideally completed by other recovery methods or advanced treatments.

  15. The utilisation of fly ash in CO2 mineral carbonation

    Directory of Open Access Journals (Sweden)

    Jaschik Jolanta


    Full Text Available The fixation of CO2 in the form of inorganic carbonates, also known as mineral carbonation, is an interesting option for the removal of carbon dioxide from various gas streams. The captured CO2 is reacted with metal-oxide bearing materials, usually naturally occurring minerals. The alkaline industrial waste, such as fly ash can also be considered as a source of calcium or magnesium. In the present study the solubility of fly ash from conventional pulverised hard coal fired boilers, with and without desulphurisation products, and fly ash from lignite fluidised bed combustion, generated by Polish power stations was analysed. The principal objective was to assess the potential of fly ash used as a reactant in the process of mineral carbonation. Experiments were done in a 1 dm3 reactor equipped with a heating jacket and a stirrer. The rate of dissolution in water and in acid solutions was measured at various temperatures (20 - 80ºC, waste-to-solvent ratios (1:100 - 1:4 and stirrer speeds (300 - 1100 min-1. Results clearly show that fluidised lignite fly ash has the highest potential for carbonation due to its high content of free CaO and fast kinetics of dissolution, and can be employed in mineral carbonation of CO2.


    Energy Technology Data Exchange (ETDEWEB)



    The overall goal of this initiative is to develop fundamental knowledge of ash behavior in power systems for the purpose of increasing power production efficiency, reducing operation and maintenance costs, and reducing greenhouse gas emissions into the atmosphere. The specific objectives of this initiative focus primarily on ash behavior related to advanced power systems and include the following: Determine the current status of the fundamental ash interactions and deposition formation mechanisms as already reported through previous or ongoing projects at the EERC or in the literature. Determine sintering mechanisms for temperatures and particle compositions that are less well known and remain for the most part undetermined. Identify the relationship between the temperature of critical viscosity (Tcv ) as measured in a viscometer and the crystallization occurring in the melt. Perform a literature search on the use of heated-stage microscopy (HSM) for examining in situ ash-sintering phenomena and then validate the use of HSM in the determination of viscosity in spherical ash particles. Ascertain the formation and stability of specific mineral or amorphous phases in deposits typical of advanced power systems. Evaluate corrosion for alloys being used in supercritical combustion systems.

  17. Techniques for measuring ammonia in fly ash, mortar, and concrete

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, R.F. [Kentucky Univ., Lexington, KY (United States). Center for Applied Energy Reseach; Majors, R.K. [Boral Material Technologies, Inc., San Antonio, TX (United States). Engineered Materials


    The presence of ammonia in fly ash that is to be used in mortar and concrete is of increasing concern in the U.S., mainly due to the installation of selective catalytic reduction (SCR) DeNOx systems. When the SCR catalyst is new, contamination of the fly ash with ammonia is generally not a concern. However, as the catalyst in the SCR ages and becomes less efficient, the ammonia slip increases and results in a greater amount of ammonium salt being precipitated on the fly ash. The increase in ammonia concentration is compounded by variability that can occur on a day-to-day basis. When marketing ammonia-laden fly ash for use in mortar and concrete it is imperative that the concentration of ammonia is known. However, there currently is no widely accepted or ''standard'' method for ammonia measurement in fly ash. This paper describes two methods that have been developed and used by the University of Kentucky Center for Applied Energy Research and Boral Material Technologies, Inc. One of the methods uses gas detection tubes and can provide an accurate determination within five to ten minutes. Thus it is suitable as a rapid field technique. The other method employs a gas-sensing electrode and requires a longer period of time to complete the measurement. However, this second method can also be used to determine the quantity of ammonia in fresh mortar and concrete. (orig.)

  18. Quick monitoring of pozzolanic reactivity of waste ashes. (United States)

    Sinthaworn, Suppachai; Nimityongskul, Pichai


    This article proposes a quick method of monitoring for pozzolanic reactivity of waste ashes by investigating the electrical conductivity of the suspension at an elevated temperature. This suspension is obtained by mixing tested pozzolan with an ordinary Portland cement (OPC) solution produced by mixing ordinary Portland cement with water. For comparison, silica fume, metakaolin, rice husk ash and river sand - whose pozzolanic reactivities range from reactive to inert - were used in the experimental investigation. The electrical conductivity of the suspension was continually recorded by using an electrical conductivity meter and stored by using a personal computer for a period of slightly over 1day. The indicative parameters that can be related to pozzolanic reactivity were discussed and analyzed in detail. It was found that it is possible to determine the pozzolanic reactivity of fly ash within 28h by using the proposed technique, as compared to 7 or 28 days for the determination of strength activity index according to ASTM. This technique would help concrete technologists to speedily investigate the quality of fly ash for use as a cement replacement in order to alleviate pollution caused by cement production and solve disposal problems of waste ashes.

  19. Hail formation triggers rapid ash aggregation in volcanic plumes. (United States)

    Van Eaton, Alexa R; Mastin, Larry G; Herzog, Michael; Schwaiger, Hans F; Schneider, David J; Wallace, Kristi L; Clarke, Amanda B


    During explosive eruptions, airborne particles collide and stick together, accelerating the fallout of volcanic ash and climate-forcing aerosols. This aggregation process remains a major source of uncertainty both in ash dispersal forecasting and interpretation of eruptions from the geological record. Here we illuminate the mechanisms and timescales of particle aggregation from a well-characterized 'wet' eruption. The 2009 eruption of Redoubt Volcano, Alaska, incorporated water from the surface (in this case, a glacier), which is a common occurrence during explosive volcanism worldwide. Observations from C-band weather radar, fall deposits and numerical modelling demonstrate that hail-forming processes in the eruption plume triggered aggregation of ∼95% of the fine ash and stripped much of the erupted mass out of the atmosphere within 30 min. Based on these findings, we propose a mechanism of hail-like ash aggregation that contributes to the anomalously rapid fallout of fine ash and occurrence of concentrically layered aggregates in volcanic deposits.