WorldWideScience

Sample records for asbestos fibres exposure

  1. Environmental exposure to asbestos and other inorganic fibres using animal lung model

    Energy Technology Data Exchange (ETDEWEB)

    Fornero, Elisa [Dipartimento di Scienze dell' Ambiente e della Vita, Universita del Piemonte Orientale ' A. Avogadro' , Via Bellini 25/g, 15100 Alessandria (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy)], E-mail: elisa.fornero@mfn.unipmn.it; Belluso, Elena [Dipartimento di Scienze Mineralogiche e Petrologiche, Universita degli Studi di Torino, Via V. Caluso 35, 10125 Torino (Italy); Istituto di Geoscienze e Georisorse, CNR-Unita di Torino, Via V. Caluso 35, 10125 Torino (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy); Capella, Silvana [Dipartimento di Scienze Mineralogiche e Petrologiche, Universita degli Studi di Torino, Via V. Caluso 35, 10125 Torino (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy); Bellis, Donata [Servizio di Anatomia, Istologia Patologica e Citodiagnostica, Azienda Ospedaliera San Giovanni Bosco, ASLTO2 Piazza Donatori del Sangue 3, 10154 Torino (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy)

    2009-01-15

    Professional exposure to asbestos fibres is widely recognized as very dangerous to human health and for this reason many countries have banned their commercial uses. People, nevertheless, continue to be exposed to low dose of asbestos from natural and anthropogenic sources still in loco, for which the potential hazard is unknown. The aim of this research is to assess environmental exposure in an area with outcropping serpentinite rocks, which bear asbestos mineralizations, using sentinel animals which are a non-experimental animal model. We studied the burden of inorganic fibres in cattle lungs which come from two areas in Italy's Western Alps bearing serpentinitic outcrops: Susa Valley with a heavy anthropization and Lanzo Valleys, with a minor human impact. The identification and quantification of inorganic fibres were performed by Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS). In comparison to humans, studies of animals have some advantages, such as no occupational exposure or history of smoking and, in the case of cattle, a sedentary life restricted to one region. Results spotlight that over than 35% of inorganic fibres found both in Susa and Lanzo valleys, belong to asbestos mineralogical species (asbestos tremolite/actinolite, chrysotile s.s., asbestos grunerite, crocidolite). We also observed a higher concentration of artificial fibrous products in Susa samples showing a correlation with the level of anthropization. These results confirm that sentinel animals are an excellent model to assess breathable environmental background because it is possible to eliminate some variables, such as unknown occupational exposure.

  2. Environmental exposure to asbestos and other inorganic fibres using animal lung model

    International Nuclear Information System (INIS)

    Fornero, Elisa; Belluso, Elena; Capella, Silvana; Bellis, Donata

    2009-01-01

    Professional exposure to asbestos fibres is widely recognized as very dangerous to human health and for this reason many countries have banned their commercial uses. People, nevertheless, continue to be exposed to low dose of asbestos from natural and anthropogenic sources still in loco, for which the potential hazard is unknown. The aim of this research is to assess environmental exposure in an area with outcropping serpentinite rocks, which bear asbestos mineralizations, using sentinel animals which are a non-experimental animal model. We studied the burden of inorganic fibres in cattle lungs which come from two areas in Italy's Western Alps bearing serpentinitic outcrops: Susa Valley with a heavy anthropization and Lanzo Valleys, with a minor human impact. The identification and quantification of inorganic fibres were performed by Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS). In comparison to humans, studies of animals have some advantages, such as no occupational exposure or history of smoking and, in the case of cattle, a sedentary life restricted to one region. Results spotlight that over than 35% of inorganic fibres found both in Susa and Lanzo valleys, belong to asbestos mineralogical species (asbestos tremolite/actinolite, chrysotile s.s., asbestos grunerite, crocidolite). We also observed a higher concentration of artificial fibrous products in Susa samples showing a correlation with the level of anthropization. These results confirm that sentinel animals are an excellent model to assess breathable environmental background because it is possible to eliminate some variables, such as unknown occupational exposure

  3. Exposure and risks from wearing asbestos mitts

    Directory of Open Access Journals (Sweden)

    Tindall Matthew

    2005-10-01

    Full Text Available Abstract Background Very high fibre inhalation exposure has been measured while people were wearing personal protective equipment manufactured from chrysotile asbestos. However, there is little data that relates specifically to wearing asbestos gloves or mitts, particularly when used in hot environments such as those found in glass manufacturing. The aim of this study was to assess the likely personal exposure to asbestos fibres when asbestos mitts were used. Results Three types of work activity were simulated in a small test room with unused mitts and artificially aged mitts. Neither pair of mitts were treated to suppress the dust emission. The measured respirable fibre exposure levels ranged from Conclusion People who wore asbestos mitts were likely to have been exposed to relatively low levels of airborne chrysotile asbestos fibres, certainly much lower than the standards that were accepted in the 1960's and 70's. The cancer risks from this type of use are likely to be very low.

  4. Airborne fibre and asbestos concentrations in system built schools

    Science.gov (United States)

    Burdett, Garry; Cottrell, Steve; Taylor, Catherine

    2009-02-01

    This paper summarises the airborne fibre concentration data measured in system built schools that contained asbestos insulation board (AIB) enclosed in the support columns by a protective steel casing. The particular focus of this work was the CLASP (Consortium of Local Authorities Special Programme) system buildings. A variety of air monitoring tests were carried out to assess the potential for fibres to be released into the classroom. A peak release testing protocol was adopted that involved static sampling, while simulating direct impact disturbances to selected columns. This was carried out before remediation, after sealing gaps and holes in and around the casing visible in the room (i.e. below ceiling level) and additionally round the tops of the columns, which extended into the suspended ceiling void. Simulated and actual measurements of worker exposures were also undertaken, while sealing columns, carrying out cleaning and maintenance work in the ceiling voids. Routine analysis of these air samples was carried out by phase contrast microscopy (PCM) with a limited amount of analytical transmission electron microscopy (TEM) analysis to confirm whether the fibres visible by PCM were asbestos or non-asbestos. The PCM fibre concentrations data from the peak release tests showed that while direct releases of fibres to the room air can occur from gaps and holes in and around the column casings, sealing is an effective way of minimising releases to below the limit of quantification (0.01 f/ml) of the PCM method for some 95% of the tests carried out. Sealing with silicone filler and taping any gaps and seams visible on the column casing in the room, also gave concentrations below the limit of quantification (LOQ) of the PCM method for 95% of the tests carried out. The data available did not show any significant difference between the PCM fibre concentrations in the room air for columns that had or had not been sealed in the ceiling void, as well as in the room

  5. Airborne fibre and asbestos concentrations in system built schools

    International Nuclear Information System (INIS)

    Burdett, Garry; Cottrell, Steve; Taylor, Catherine

    2009-01-01

    This paper summarises the airborne fibre concentration data measured in system built schools that contained asbestos insulation board (AIB) enclosed in the support columns by a protective steel casing. The particular focus of this work was the CLASP (Consortium of Local Authorities Special Programme) system buildings. A variety of air monitoring tests were carried out to assess the potential for fibres to be released into the classroom. A peak release testing protocol was adopted that involved static sampling, while simulating direct impact disturbances to selected columns. This was carried out before remediation, after sealing gaps and holes in and around the casing visible in the room (i.e. below ceiling level) and additionally round the tops of the columns, which extended into the suspended ceiling void. Simulated and actual measurements of worker exposures were also undertaken, while sealing columns, carrying out cleaning and maintenance work in the ceiling voids. Routine analysis of these air samples was carried out by phase contrast microscopy (PCM) with a limited amount of analytical transmission electron microscopy (TEM) analysis to confirm whether the fibres visible by PCM were asbestos or non-asbestos. The PCM fibre concentrations data from the peak release tests showed that while direct releases of fibres to the room air can occur from gaps and holes in and around the column casings, sealing is an effective way of minimising releases to below the limit of quantification (0.01 f/ml) of the PCM method for some 95% of the tests carried out. Sealing with silicone filler and taping any gaps and seams visible on the column casing in the room, also gave concentrations below the limit of quantification (LOQ) of the PCM method for 95% of the tests carried out. The data available did not show any significant difference between the PCM fibre concentrations in the room air for columns that had or had not been sealed in the ceiling void, as well as in the room

  6. Asbestos exposure and mesothelioma in South Africa | Rees | South ...

    African Journals Online (AJOL)

    Objectives. To describe the exposure experiences of South African mesothelioma cases, with emphasis on the contribution made to the caseload by different fibre types, the proportion of subjects with no recall of asbestos exposure and only environmental contact, and the importance of putative causes other than asbestos.

  7. Asbestos Exposure Assessment Database

    Science.gov (United States)

    Arcot, Divya K.

    2010-01-01

    Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

  8. Residual fibre lung burden among patients with pleural mesothelioma who have been occupationally exposed to asbestos.

    Science.gov (United States)

    Merler, Enzo; Somigliana, Anna; Girardi, Paolo; Barbieri, Pietro Gino

    2017-03-01

    To evaluate the lungs asbestos fibres concentration in participants with malignant pleural mesothelioma (MPM) who have been occupationally exposed. The lung samples were obtained from pleuropneumonectomies or autopsies of 271 male MPMs. The lung samples were examined through scanning electron microscopy. Retrospective assessment was used to assess for asbestos exposure. This study includes 248 MPMs with an occupational exposure defined as either 'definite' or 'probable' or 'possible'. The participants had finished working in asbestos exposure conditions more than 20 years ago (on average 26.1±11.0 years). The fibre burden resulted with a geometric mean equal to 2.0 (95% CI 1.6 to 2.4) million fibres per gram of dry lung tissue. The burden was higher among participants employed in asbestos textiles industry and in shipyards with insulation material, if compared with construction workers or non-asbestos textile workers or participants working in chemicals or as auto mechanics. 91.3% of MPMs had a detectable amount of amphibole fibres. A strong lung clearance capability was evident among workers exposed to chrysotile fibres. Owing to that, the 1997 Helsinki Criteria for occupational exposure were reached in industry, in chemical or textile industry and among those performing brake repair activities. The MPM cases are now occurring in Italy in participants who ceased occupational asbestos exposure decades before the analysis. A large majority still shows a residual content of amphibole fibres, but given the lung clearance capability, attribution to occupational exposure cannot rely only on fibres detection. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  9. Asbestos fibre concentrations in the lungs of brake workers: another look.

    Science.gov (United States)

    Finkelstein, Murray M

    2008-08-01

    To reanalyse data on the lung content of asbestos fibres among brake mechanics. I re-analysed data published by Butnor, Roggli and colleagues on the lung content of chrysotile and tremolite asbestos fibres among brake mechanics and controls. Statistics of the distributions were estimated by maximum likelihood to accommodate observations below the detection limit. Mean concentrations were compared by the t-test, bootstrap resampling and interval-censored survival methods. The mean concentrations of fibres were higher among the brake workers than the controls. The concentration of tremolite fibres was higher than the concentration of chrysotile, a pattern similar to that observed among Quebec chrysotile miners and millers. Re-analysis of published data does not support the interpretation that, in automotive brake repair workers with malignant mesothelioma, asbestos content is within the normal range. The alternative interpretation that brake mechanics have a greater than background burden of asbestos fibres, attributable to occupational exposure to dusts from friction products manufactured from Canadian chrysotile, appears more credible. This asbestos burden might be associated with an increased risk of asbestos-associated cancers.

  10. Siderophores, the answer for micro to nanosized asbestos fibre related health hazard

    Science.gov (United States)

    Bhattacharya, Shabori; Ledwani, Lalita; John, P. J.

    2016-04-01

    Recent studies on the potential toxicity of High Aspect Ratio Nanoparticles (HARN) has yet once again reinforced the health hazard imposed by asbestos fibres ranging from nano to micro size. Asbestos a naturally occurring fibrous mineral declared a Group I definite carcinogen by IARC (International Agency for Research on Cancer), a unit of WHO in the year 1987, has been extensively used since World War II to the near past for various commercial products. According to the most recent World Health Organization (WHO) estimates, asbestos-related diseases, resulting from exposure at workplace claims more than 107000 lives every year worldwide. The various types of toxic effects induced by asbestos in humans include - i) inflammation and fibrogenesis of lung, ii) mesothelioma iii) asbestosis and iv) bronchogenic carcinoma. The stability of asbestos in natural environment and its biological aggressiveness is related to their fibrous structure and dimensions. The actual risk associated with the exposure to nanosized asbestos, which is still unknown and escapes most regulations worldwide, has been shown in various toxicity assessment studies conducted on various animal models.In an effort to reduce the size of asbestos and therby its toxicity by limiting its biopersistence, oxalic acid treatment of asbestos coupled to power ultrasound treatment was carried out. The nanosized particles formed were still found to retain their hazardous effect. Similar were the results obtained on strong acid treatment of asbestos as well. A probable solution to the asbestos toxicity problem therefore envisaged was bioremediation. This involved the secretion of iron chelating molecules termed siderophores by microbes, which are of significance due to their ability to form very stable and soluble complexes with iron. Iron in asbestos composition is a major factor responsible for its carcinogenicity, removal or extraction of which would prove to be an effective answer to the worldwide problem

  11. Asbestos fibres in indoor and outdoor air and the epidemiology of asbestos-related diseases in Quebec : summary and recommendation of the reports

    Energy Technology Data Exchange (ETDEWEB)

    DeGuire, L.; Lajoie, P.; Lemieux, C.; Poulin, M.

    2004-07-01

    An asbestos advisory committee was created in 1997 by Quebec's Ministry of Health to address concerns regarding exposure to asbestos fibres. Two sub-committees were subsequently formed. One sub-committee evaluated the pertinence and feasibility of assessing exposure in the general population, particularly in public buildings such as schools, while the other reviewed epidemiological studies in Quebec on mesothelioma, pulmonary cancers and asbestosis. Each sub-committee produced a report. This document summarizes the two reports and outlines the current scientific knowledge on the effects of asbestos on human health. The preventive programs and subsequent evaluations undertaken in Quebec with respect to sprayed asbestos in schools was described along with studies of asbestos exposure among workers in the mining sector. A study was also conducted within the asbestos processing industry to identify how many workers exceeded standard exposure limits. The standard time-weighted average exposure value currently in force in Quebec is 1 fibre per ml for chrysotile and 0.2 fibres per ml for amosite and crocidolite. A recommendation was made to revise this standard. In terms of outdoor air, the concentrations measured in recent years in mining towns have been generally very low. Along with asbestos-asphalt, asbestos waste taken to landfill sites may represent a significant source of exposure. A screening for asbestosis in the building and public works sector has shown that 1,500 workers (insulators, plumber-pipe fitters, elevator mechanics, fire protection mechanics and boiler-makers) experienced significant exposure to high concentrations of asbestos fibres in the ambient air. The 3 main health effects of asbestos exposure include mesothelioma of the pleura and peritoneum, pulmonary cancer and asbestosis. Each of these diseases appears after a latency period of 20 to 40 years, depending on the pathology. Epidemiological studies show a statistically significant increase

  12. Airborne asbestos fibre levels in buildings: a summary of UK measurements.

    Science.gov (United States)

    Burdett, G J; Jaffrey, S A; Rood, A P

    1989-01-01

    The UK Health and Safety Executive, in conjunction with the Department of the Environment, has carried out a number of surveys of airborne asbestos fibre concentrations in buildings. All samples have been collected on membrane filters and analysed by analytical transmission electron microscopy. Four categories of buildings under normal occupation have been investigated; non-domestic buildings containing sprayed or trowelled asbestos, domestic buildings containing sprayed asbestos or asbestos plaster, buildings with warm air heaters containing asbestos and buildings without asbestos materials. A number of buildings have also been surveyed during and after the removal of asbestos materials. The choice of measurement indices and analytical procedures is reviewed, before measurements are compared in terms of the concentration of asbestos fibres greater than 5 microns long. The decision whether to remove asbestos from occupied buildings is discussed with reference to the associated cost and risk. In the present survey, management of undamaged asbestos appeared preferable to large-scale removal.

  13. Assessing asbestos exposure potential in nonindustrial settings.

    Science.gov (United States)

    Chang, S N; White, L E; Scott, W D

    1987-01-01

    The presence of asbestos containing materials (ACM) in office and commercial buildings is a significant environmental problem. Asbestosis, mesothelioma and lung cancer have been linked with industrial exposure to airborne asbestos. The extensive use of asbestos products in buildings has raised concerns about the widespread exposure of the general public to asbestos in nonoccupational settings. The presence of asbestos in a building does not necessarily mean that significant exposure of the occupants of the building has occurred, but it is important that the asbestos be monitored regularly to ensure that fibers do not become airborne. If ACM are contained within a matrix and not disturbed, exposure is unlikely. However, if the asbestos becomes friable (crumbling) or if building maintenance, repair, renovation or other activities disturb ACM, airborne asbestos fibers may be a source of exposure to the occupants of the building. Currently, asbestos exposure assessment is conducted by a phase contrast light microscope (PCM) technique. Due to its inherent limitation in resolution and the generic counting rules used, analysis by the PCM method underestimates the airborne asbestos fiber concentration as compared to analysis by transmission electron microscopy (TEM). It is important that the air monitoring results analyzed by PCM be interpreted carefully in conjunction with a survey by a professional to judge the physical condition of the ACM in buildings. Exposure levels to airborne asbestos fibers vary from day to day and depend on the physical condition of the material involved and the type of operating and maintenance program in place.(ABSTRACT TRUNCATED AT 250 WORDS)

  14. Biological durability and oxidative potential of a stonewool mineral fibre compared to crocidolite asbestos fibres

    Energy Technology Data Exchange (ETDEWEB)

    Hippeli, S. [Lehrstuhl fuer Phytopathologie, Labor fuer Biochemische Toxikologie, Technische Universitaet Muenchen-Weihenstephan, D-85350 Freising-Weihenstephan (Germany); Dornisch, K. [Lehrstuhl fuer Phytopathologie, Labor fuer Biochemische Toxikologie, Technische Universitaet Muenchen-Weihenstephan, D-85350 Freising-Weihenstephan (Germany); Kaiser, S. [Lehrstuhl fuer Phytopathologie, Labor fuer Biochemische Toxikologie, Technische Universitaet Muenchen-Weihenstephan, D-85350 Freising-Weihenstephan (Germany); Draeger, U. [Deutsche Rockwool Mineralwoll GmbH, Karl-Schneider-Strasse 14-18, D-45966 Gladbeck (Germany); Elstner, E.F. [Lehrstuhl fuer Phytopathologie, Labor fuer Biochemische Toxikologie, Technische Universitaet Muenchen-Weihenstephan, D-85350 Freising-Weihenstephan (Germany)

    1997-07-01

    Experiments are described concerning the differences in redox properties and biodurability of natural asbestos fibres and an experimental stonewool fibre incubated in Gamble solution and reconstructed surfactant fluid. Crocidolite exhibits a significantly higher oxidative potential compared to the tested stonewool fibres. The oxidative acitivity of both types of fibres is not constant during incubation over several weeks, but rather shows a sinoidal curve including reactivities much higher than those at the beginning of the incubation. A continuous loss of mass is concluded not to be definitively connected with a continuous loss of toxicity. (orig.). With 1 fig.

  15. Asbestos exposure and Alzheimer disease

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, C; Bittesini, L; Brollo, A

    1986-02-01

    10 cases in which an asbestos-related disease (malignant pleural mesothelioma or asbestosis) was associated with severe Alzheimer type lesions in the brain are reported. The patients, all males aged between 67 and 78 years, had been occupationally exposed to asbestos in the shipbuilding industry. The hypothesis that asbestos is a favoring factor in the genesis of Alzheimer disease is discussed.

  16. Asbestos exposure of building maintenance personnel.

    Science.gov (United States)

    Mlynarek, S; Corn, M; Blake, C

    1996-06-01

    The exposures of building maintenance personnel and occupants to airborne asbestos fibers, and the effects of operations and maintenance programs on those exposures, continue to be an important public health issue. The subject of this investigation was a large metropolitan county with numerous public buildings which routinely conducted air sampling for asbestos. A total of 302 personal air samples in nine task categories collected during maintenance worker activities in proximity to asbestos-containing materials were analyzed; 102 environmental air samples in four task categories were also analyzed. The arithmetic means of the 8-hr time weighted average exposures for personal sampling for each task category were all below the Occupational Safety and Health Administration permissible exposure level of 0.1 fibers (f)/cc > 5 microm. The highest mean 8-hr time weighted average exposure was 0.030 f/cc > 5 microm for ceiling tile replacement. The maximum asbestos concentration during sample collection for environmental samples was 0.027 f/cc > 5 microm. All asbestos-related maintenance work was done within the framework of an Operations and Maintenance Program (OMP) which utilized both personal protective equipment and controls against fiber release/dispersion. Results are presented in association with specific OMP procedures or controls. These results support the effectiveness of using Operations and Maintenance Programs to manage asbestos in buildings without incurring unacceptable risk to maintenance workers performing maintenance tasks.

  17. Environmental exposure to asbestos: from geology to mesothelioma.

    Science.gov (United States)

    Bayram, Mehmet; Bakan, Nur Dilek

    2014-05-01

    This article aims to review the geological background of environmental asbestos exposure and the distribution of asbestos-related disease (ARD) in association with naturally occurring asbestos (NOA), and discusses the potential health risks associated with exposure to non-occupational asbestos. With the motion of continental and oceanic plates, in some parts of the world serpentinites in the lower layer of the oceanic plate move into the continental plate and form the so-called ophiolites. Ophiolites consist of soil and rocks containing serpentine-type asbestos. There is an increase in ARDs in regions close to ophiolites. Indoor exposure and outdoor exposure to NOA, outdoor exposure to industrial asbestos and mines, urbanization and construction works in NOA regions are the known sources and types of environmental asbestos exposure. Although there is an expectance of decline in ARDs caused by industrial exposure to asbestos, the environmental exposure to asbestos is still a challenge waiting to be overcome.

  18. Asbestos Exposure and Cancer Risk

    Science.gov (United States)

    ... for medical care, and, where necessary, medical and vocational rehabilitation assistance in returning to work. Benefits may ... asbestos Another EPA resource that may be of interest is the brochure titled Current Best Practices for ...

  19. [Mesothelioma in construction workers: risk estimate, lung content of asbestos fibres, claims for compensation for occupational disease in the Veneto Region mesothelioma register].

    Science.gov (United States)

    Merler, E; Bressan, Vittoria; Somigliana, Anna

    2009-01-01

    Work in the construction industry is causing the highest number of mesotheliomas among the residents of the Veneto Region (north-east Italy, 4,5 million inhabitants). To sum up the results on occurrence, asbestos exposure, lung fibre content analyses, and compensation for occupational disease. Case identification and asbestos exposure classification: active search of mesotheliomas that were diagnosed via histological or cytological examinations occurring between 1987 and 2006; a probability of asbestos exposure was attributed to each case, following interviews with the subjects or their relatives and collection of data on the jobs held over their lifetime. Risk estimate among construction workers: the ratio between cases and person-years, the latter derived from the number of construction workers reported by censuses. Lung content of asbestos fibres: examination of lung specimens by Scanning Electron Microscope to determine number and type of fibres. Claims for compensation and compensation awarded: data obtained from the National Institute for Insurance against Occupational Diseases available for the period 1999-2006. of 952 mesothelioma cases classified as due to asbestos exposure, 251 were assigned to work in the construction industry (21 of which due to domestic of environmental exposures), which gives a rate of 4.1 (95% CI 3.6-4.8) x 10(5) x year among construction workers. The asbestos fibre content detected in the lungs of 11 construction workers showed a mean of 1.7 x 10(6) fibres/g dry tissue (range 350,000-3 million) for fibres > 1 micro, almost exclusively due to amphibole fibres. 62% of the claims for compensation were granted but the percentage fell to less than 40% when claims were submitted by a relative, after the death of the subject. The prevalence of mesothelioma occurring among construction workers is high and is associated with asbestos exposure; the risk is underestimated by the subjects and their relatives. All mesotheliomas occurring among

  20. Retrospective assessment of occupational asbestos exposure among 220 patients with respiratory cancer hospitalized at Vilnius University Institute of Oncology

    International Nuclear Information System (INIS)

    Petrauskaite Everatt, R.; Jankauskas, R.; Tossavainen, A.; Cicenas, S.; Smolianskiene, G.

    2005-01-01

    No cases of lung cancer or mesothelioma have ever been diagnosed or compensated as asbestos-related in Lithuania. This paper attempts to estimate the proportion of those occupationally exposed to asbestos among respiratory cancer patients. Occupational exposure to asbestos was assessed retrospectively for 218 lung cancer and 2 mesothelioma patients admitted to Institute of Oncology, Vilnius University. The evaluation was based on personal interview data using an internationally established questionnaire. Cumulative exposure to asbestos at work was evaluated in fibre-years. A cumulative asbestos exposure of ≥25 fibre-years was found for 7 patients (3.2%), in further 135 (61.2%) a cumulative exposure from 0.01 to 24.99 fibre-years was assessed. The most common occupations among heavily (≥25 fibre-years) exposed patients were smith, welder or insulator in foundries, construction, shipyard as well as asbestos cement and glass industry. Preliminary findings indicate that a fraction (3.2%) of the respiratory cancer cases could be attributed to occupational exposure to asbestos. Since 1560 or more cases of lung cancer are registered every year in Lithuania, about 50 cases per year could be predicted to be asbestos-related. (author)

  1. Development of a Job-Exposure Matrix (AsbJEM) to Estimate Occupational Exposure to Asbestos in Australia.

    Science.gov (United States)

    van Oyen, Svein C; Peters, Susan; Alfonso, Helman; Fritschi, Lin; de Klerk, Nicholas H; Reid, Alison; Franklin, Peter; Gordon, Len; Benke, Geza; Musk, Arthur W

    2015-07-01

    Occupational exposure data on asbestos are limited and poorly integrated in Australia so that estimates of disease risk and attribution of disease causation are usually calculated from data that are not specific for local conditions. To develop a job-exposure matrix (AsbJEM) to estimate occupational asbestos exposure levels in Australia, making optimal use of the available exposure data. A dossier of all available exposure data in Australia and information on industry practices and controls was provided to an expert panel consisting of three local industrial hygienists with thorough knowledge of local and international work practices. The expert panel estimated asbestos exposures for combinations of occupation, industry, and time period. Intensity and frequency grades were estimated to enable the calculation of annual exposure levels for each occupation-industry combination for each time period. Two indicators of asbestos exposure intensity (mode and peak) were used to account for different patterns of exposure between occupations. Additionally, the probable type of asbestos fibre was determined for each situation. Asbestos exposures were estimated for 537 combinations of 224 occupations and 60 industries for four time periods (1943-1966; 1967-1986; 1987-2003; ≥2004). Workers in the asbestos manufacturing, shipyard, and insulation industries were estimated to have had the highest average exposures. Up until 1986, 46 occupation-industry combinations were estimated to have had exposures exceeding the current Australian exposure standard of 0.1 f ml(-1). Over 90% of exposed occupations were considered to have had exposure to a mixture of asbestos varieties including crocidolite. The AsbJEM provides empirically based quantified estimates of asbestos exposure levels for Australian jobs since 1943. This exposure assessment application will contribute to improved understanding and prediction of asbestos-related diseases and attribution of disease causation. © The

  2. Biological durability and oxidative potential of man-made vitreous fibres as compared to crocidolite asbestos fibres

    Energy Technology Data Exchange (ETDEWEB)

    Hippeli, S.; Dornisch, K.; Elstner, E.F. [Lehrstuhl fuer Phytopathologie, Technische Univ. Muenchen-Weihenstephan, Freising-Weihenstephan (Germany); Wiethege, T.; Mueller, K.M. [Berufsgenossenschaftliche Kliniken Bergmannsheil, Universitaetsklinik, Inst. fuer Pathologie, Bochum (Germany); Gillissen, A. [Medizinische Universitaetsklinik und Poliklinik II, Kardiologie, Pneumologie, Bonn (Germany)

    2001-08-01

    In this study we investigated relationships between redox properties and biodurability of crocidolite asbestos fibres and three different man-made vitreous fibres (MMVF): traditional stone wool fibres (MMVF 21), glass fibres (MMVF 11) and refractory ceramic fibres (RCF). Each fibre type was incubated up to 22 weeks in four different incubation media: gamble solution (GS) pH 5.0 and pH 7.4, representing blood plasma without proteins, and surfactant-like solution (SLS) pH 5.0 and pH 7.4. During incubation time aliquots of incubation mixtures were removed and analysed in a biochemical model reaction, mimicking activated phagocytes. In addition, changes of fibre morphology and chemical composition were examined using SEM- and EDX-technology. In the presence of crocidolite asbestos fibres and MMVF 21 the formation of OH-radicals according to the Haber-Weiss sequence could be demonstrated, whereas MMVF 11 and RCF showed no reactivity. Crocidolite asbestos fibres exhibited a significant higher activity compared with the stone wool fibres at the onset of incubation. The oxidative capacities of these fibre types were shown to depend on both specific surface area and iron content. The oxidative potentials of crocidolite asbestos fibres as well as MMVF 21 were not constant during incubation over several weeks in each incubation medium. The reactivities showed sinoidal curves including reactivities much higher than those at the onset of incubation time. These irregular changes of oxidative capacity may be explained by changes of the redox state of fibre surface-complexed iron. Furthermore our results showed clear differences between incubation of fibres in GS and SLS, respectively, indicating that phospholipids play an important part in fibre dissolution behaviour and oxidative reactivity. (orig.)

  3. Exposure to asbestos and levels of selected tumor biomarkers

    International Nuclear Information System (INIS)

    Krajewska, B.; Lutz, W.; Pilacik, B.

    1996-01-01

    Occupational exposure to asbestos, a recognised carcinogen, poses a risk for such diseases as asbestosis, lung cancer and mesothelioma. It is thought that asbestos fibres may damage microphages which undergo neoplastic transformation as well as fibroblast, while partial phagocytosis may generate free oxygenic radicals which induce cellular peroxidase and damage macromolecules. Neoplastic biomarkers such as tissue polypeptide antigen (TPA) or carcinoembryonic antigen (CEA) are now used for this purpose. The aim of the work was to identify workers exposed to asbestos in the population, especially high risk groups neoplastic diseases and to evaluate the usefulness of TPA and CEA determinations. The study covered a group of asbestos exposed workers (n = 4000 and the control group of workers (n = 135) nonexposed to any toxic factor at work. Age, exposure time, smoking habits and workpost characteristics were taken into consideration in the analysis of the results. It was revealed that in 38 persons exposed to asbestos, TPA values were above the concentration limit set on the basis of studies carried out in the control group, and elevated CEA values applied to 13 persons. Significant differences between groups under study were found in the proportion of pathological TPA values. Such a relationship was not observed in regard to CEA values. In the exposed group the results also indicated an evident effect of age and exposure time on the number of persons with TPA values above concentration limit. The effect of smoking on the frequency of pathological TPA values was also clear-cut in workers exposed to asbestos. Taking into account three types of employment, the analysis indicated significant differences in TPA values between blue collar workers and other personnel; and between white collar workers and other personnel. This means a similar percentage of pathological TPA values in the group of blue collar and white collar workers. The study carried out allowed to identify

  4. Exposure to asbestos in patients with malignant mesothelioma in Iran

    Directory of Open Access Journals (Sweden)

    Gholamreza Pouryaghoub

    2014-05-01

    Conclusion: The results of our study specified the jobs with high risks of exposure to asbestos and approved the relationship between the exposure to asbestos and the inci-dence of mesothelioma in Iran, according to researches in other countries. So the con-sumption of asbestos in Iran, like 20 other countries in the world is necessary to be banned.

  5. Mesothelioma mortality surveillance and asbestos exposure tracking in Italy

    Directory of Open Access Journals (Sweden)

    Lucia Fazzo

    2012-01-01

    Full Text Available INTRODUCTION: Spatial distribution of mortality from pleural mesothelioma (which in the ICD-10 Revision has a specific code: C45.0 in Italy for the period 2003-2009 is described. Previous mortality studies at national level employed the topographic code "Malignant neoplasms of pleura", because of unavailability of a specific code in ICD-9 Revision for pleural mesothelioma. METHODS: Standardized mortality ratios were computed for all municipalities, using each regional population as reference; for municipalities in Regions with rate higher than the national rate, the latter has been used as reference. SMRs were computed specifically also for each Italian Polluted Sites "of national concern for environmental remediation" (IPS with asbestos exposure sources, composed by one or more municipalities, using regional rate as reference. Spatial Scan Statistics procedure, using SatScan software, was applied in cluster analysis: the country was divided into geographic macro-areas and the relative risks (RR express the ratio of risk within the cluster to the risk of the macro-area outside the cluster. Clusters with p-value < 0.10 were selected. RESULTS: The national standardized annual mortality rate was 1.7 cases per 100 000. Several areas with evident burden of asbestos-related disease were detected. Significant clusters were found in correspondence to asbestos-cement industries (e.g. Casale Monferrato, women: RR = 28.7, shipyards (e.g. Trieste, men: RR = 4.8, petrochemical industries (e.g. Priolo, men: RR = 6.9 and a stone quarry contaminated by fluoro-edenite fibres (Biancavilla, women: RR = 25.9. Some of the increased clusters correspond to IPS. CONCLUSIONS: The results may contribute to detect asbestos exposure and to set priorites for environmental remediation.

  6. Emission of asbestos fibres from natural-draught cooling towers. Pt. 1 and 2

    International Nuclear Information System (INIS)

    Ernst, G.; Althaus, E.; Karotke, E.; Grimm, K.; Heumann, H.G.; Rueckert, G.

    1985-01-01

    Sampling for the studies reported has been done in a relatively new nuclear power plant with natural-draught, wet cooling tower, and in an older, brown-coal fired power plant with the same type of cooling towers, both towers equipped with internal structures made of asbestos cement. Samples have been taken from the plumes, air in the environment, cooling water receiving tank, make-up water. The samples have been primarily examined for their content of asbestos fibres. The results show that relatively few asbestos is found in the environmental air and in the cooling water receiving tank. Putting it continuously, it can be said that the cooling water entrains only little amounts of the asbestos of the internal structures. The plume samples indicate emission of some thousand asbestos fibres per m 3 , or less than 1 ng. Taking into account one sample exhibiting an extremely high amount of asbestos, the average emission of asbestos fibres with the plumes is 10 6 fibres per m 3 , or 100 ng/m 3 of plume. The maximum air pollution thus calculated in accordance with TA Luft (Clean Air Technical Directive), for the less favourable weather conditions at a hight of 2 m above ground, is 10 fibres per one m 3 of air; including the extreme data of the single sample mentioned above, the result is some thousand fibres per m 3 . The data are far below the TRK data (Technical guiding data for maximum concentration at the place of work), which state a maximum of 10 6 fibres per m 3 . (orig.) [de

  7. Current Best Practices for Preventing Asbestos Exposure Among Brake and Clutch Repair Workers

    Science.gov (United States)

    Covers concerns about asbestos exposure for mechanics, how to tell if asbestos brake or clutch components contain asbestos, work practices to follow, protecting yourself for home mechanics, disposal of waste that contains asbestos.

  8. Exposure of UK industrial plumbers to asbestos, Part II: Awareness and responses of plumbers to working with asbestos during a survey in parallel with personal sampling.

    Science.gov (United States)

    Bard, Delphine; Burdett, Garry

    2007-03-01

    Throughout the European Union, millions tonnes of asbestos were used in the manufacture of products for building and for industrial installations. Today, in the UK, it is estimated that over half a million non-domestic premises alone have asbestos-containing materials in them and it is recognized that those working in building maintenance trades continue to be at significant risk. In part II, the awareness of UK plumbers to when they are working with asbestos was investigated and compared with the monitored levels reported in part I. The plumbers were issued by post with passive samplers, activity logs to monitor a working week and a questionnaire. The activity logs were used to assess whether maintenance workers were knowingly or unknowingly exposed to airborne asbestos fibres during a course of a working week. The questionnaire was designed to gather information on their: age, employment status, current and past perception of the frequency which they work with asbestos and knowledge of the precautions that should be taken to limit exposure and risk. Approximately 20% of workers reported on the sample log that they had worked with asbestos. There was a high correlation (93%) between the sampling log replies that they were knowingly working with asbestos and measured asbestos on the passive sampler. However, some 60% of the samples had >5 microm long asbestos structures found by transmission electron microscopy (TEM) analysis suggesting that the plumbers were aware of about only one-third of their contacts with asbestos materials throughout the week. This increased to just over one half of the plumbers being aware of their contact based on the results for phase contrast microscopy (PCM) countable asbestos fibres. The results from the questionnaire found that over half of the plumbers replying thought that they disturb asbestos only once a year and 90% of them thought they would work with asbestos for<10 h year-1. Their expectations and awareness of work with

  9. Assessment of asbestos body formation by high resolution FEG-SEM after exposure of Sprague-Dawley rats to chrysotile, crocidolite, or erionite.

    Science.gov (United States)

    Gandolfi, Nicola Bursi; Gualtieri, Alessandro F; Pollastri, Simone; Tibaldi, Eva; Belpoggi, Fiorella

    2016-04-05

    This work presents a comparative FEG-SEM study of the morphological and chemical characteristics of both asbestos bodies and fibres found in the tissues of Sprague-Dawley rats subjected to intraperitoneal or intrapleural injection of UICC chrysotile, UICC crocidolite and erionite from Jersey, Nevada (USA), with monitoring up to 3 years after exposure. Due to unequal dosing based on number of fibres per mass for chrysotile with respect to crocidolite and erionite, excessive fibre burden and fibre aggregation during injection that especially for chrysotile would likely not represent what humans would be exposed to, caution must be taken in extrapolating our results based on instillation in experimental animals to human inhalation. Notwithstanding, the results of this study may help to better understand the mechanism of formation of asbestos bodies. For chrysotile and crocidolite, asbestos bodies are systematically formed on long asbestos fibres. The number of coated fibres is only 3.3% in chrysotile inoculated tissues. In UICC crocidolite, Mg, Si, and Fe are associated with the fibres whereas Fe, P and Ca are associated with the coating. Even for crocidolite, most of the observed fibres are uncoated as coated fibres are about 5.7%. Asbestos bodies do not form on erionite fibres. The crystal habit, crystallinity and chemistry of all fibre species do not change with contact time, with the exception of chrysotile which shows signs of leaching of Mg. A model for the formation of asbestos bodies from mineral fibres is postulated. Because the three fibre species show limited signs of dissolution in the tissue, they cannot act as source of elements (primarily Fe, P and Ca) promoting nucleation and growth of asbestos bodies. Hence, the limited number of coated fibres should be due to the lack of nutrients or organic nature. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Malignant Mesothelioma after Household Exposure to Asbestos

    Directory of Open Access Journals (Sweden)

    Raya Saba

    2013-01-01

    Full Text Available Malignant mesothelioma (MM is an aggressive cancer that has been closely linked to asbestos exposure. Initially recognized as an occupational cancer in male workers, MM was later found to occur in their family members as well. We report the case of an 89-year-old female who presented with abdominal distention, pain, and findings consistent with malignant ascites. Family history was significant for fatal mesothelioma in her husband of 40 years, who was a worker at a tile factory. The diagnosis of MM was confirmed on pathologic examination of the omental core biopsy.

  11. Asbestos exposures of mechanics performing clutch service on motor vehicles.

    Science.gov (United States)

    Cohen, Howard J; Van Orden, Drew R

    2008-03-01

    A study was conducted to assess historical asbestos exposures of mechanics performing clutch service on motor vehicles. For most of the 20th century, friction components used in brakes and manual transmission clutches contained approximately 25-60% chrysotile asbestos. Since the late 1960s, asbestos exposure assessment studies conducted on mechanics performing brake service have frequently reported levels below the current OSHA permissible exposure limit (PEL) of 0.1 fiber/cc (flcc). Although there is a robust asbestos exposure data set for mechanics performing brake service, there are almost no data for mechanics removing and replacing clutches in manual transmission vehicles. Personal and area airborne asbestos samples were collected during the removal of asbestos-containing clutches from 15 manual transmissions obtained from salvage facilities by an experienced mechanic. Clutch plates and debris were analyzed for asbestos using EPA and ISO published analytical methods. More than 100 personal and area air samples were collected and analyzed for asbestos fibers using NIOSH methods 7400 and 7402. A separate study involved a telephone survey of 16 automotive mechanics who began work prior to 1975. The mechanics were asked about the duration, frequency, and methods used to perform clutch service. Wear debris in the bell housing surrounding clutches had an average of 0.1% chrysotile asbestos by weight, a value consistent with similar reports of brake debris. Asbestos air sampling data collected averaged 0.047 flcc. Mechanics participating in the telephone survey indicated that clutch service was performed infrequently, the entire clutch assembly was normally replaced, and there was no need to otherwise handle the asbestos-containing clutch plates. These mechanics also confirmed that wet methods were most frequently used to clean debris from the bell housing. Combining the asbestos exposure that occurred when mechanics performed clutch service, along with the duration

  12. Durability and inflammogenic impact of carbon nanotubes compared with asbestos fibres

    Directory of Open Access Journals (Sweden)

    Clark Steve

    2011-05-01

    Full Text Available Abstract Background It has been suggested that carbon nanotubes might conform to the fibre pathogenicity paradigm that explains the toxicities of asbestos and other fibres on a continuum based on length, aspect ratio and biopersistence. Some types of carbon nanotubes satisfy the first two aspects of the fibre paradigm but only recently has their biopersistence begun to be investigated. Biopersistence is complex and requires in vivo testing and analysis. However durability, the chemical mimicking of the process of fibre dissolution using in vitro treatment, is closely related to biopersistence and more readily determined. Here, we describe an experimental process to determine the durability of four types of carbon nanotubes in simulated biological fluid (Gambles solution, and their subsequent pathogenicity in vivo using a mouse model sensitive to inflammogenic effects of fibres. The in vitro and in vivo results were compared with well-characterised glass wool and asbestos fibre controls. Results After incubation for up to 24 weeks in Gambles solution, our control fibres were recovered at percentages consistent with their known in vitro durabilities and/or in vivo persistence, and three out of the four types of carbon nanotubes tested (single-walled (CNTSW and multi-walled (CNTTANG2, CNTSPIN showed no, or minimal, loss of mass or change in fibre length or morphology when examined by electron microscopy. However, the fourth type [multi-walled (CNTLONG1] lost 30% of its original mass within the first three weeks of incubation, after which there was no further loss. Electron microscopy of CNTLONG1 samples incubated for 10 weeks confirmed that the proportion of long fibres had decreased compared to samples briefly exposed to the Gambles solution. This loss of mass and fibre shortening was accompanied by a loss of pathogenicity when injected into the peritoneal cavities of C57Bl/6 mice compared to fibres incubated briefly. CNTSW did not elicit an

  13. Evaluation of exposure to the airborne asbestos in an asbestos cement sheet manufacturing industry in Iran.

    Science.gov (United States)

    Panahi, Davood; Kakooei, Hossein; Marioryad, Hossein; Mehrdad, Ramin; Golhosseini, Mohammad

    2011-07-01

    Iran imports nearly 55,000 tons of Chrysotile asbestos per year and asbestos cement (AC) plants contribute nearly 94% of the total national usage. In the present study, airborne asbestos concentrations during AC sheet manufacturing were measured. The fiber type and its chemical composition were also evaluated by scanning electron microscopy (SEM), with energy-dispersive X-ray analysis. Airborne total fiber concentrations of 45 personal samples were analyzed by phase contrast microscopy. The results have highlighted that 15.5% of samples exceed the threshold limit value (TLV) established the American Conference of Governmental Industrial Hygienists, which is 0.1 fiber per milliliter (f/ml). Personal monitoring of asbestos fiber levels indicated a ranged from 0.02 ± 0.01 to 0.16 ± 0.03 f/ml. The geometrical mean was 0.05 ± 1.36 f/ml, which is considerably lower than the TLV. SEM data demonstrate that the fibrous particles consisted, approximately, of Chrysotile (55.89%) and amphiboles (44.11%). We conclude that the industrial consumption of imported Chrysotile asbestos is responsible for the high airborne amphibole asbestos levels in the AC sheet industry. More research is needed to improve characterization of occupational exposures by fiber size and concentration in a variety of industries.

  14. Asbestos

    Science.gov (United States)

    ... in dust. People working with or around asbestos (miners, asbestos abatement workers, custodial and maintenance workers, and ... Introduction Treatment Options Side Effects Emotional Challenges Life Planning Summary '; if (window.location.href.indexOf("navigator/concernedpathway") > - ...

  15. Asbestos

    Science.gov (United States)

    Virta, Robert

    2011-01-01

    The term asbestos is a generic designation referring usually to six types of naturally occurring mineral fibers that are or have been commercially exploited. These fibers belong to two mineral groups: serpentines and amphiboles. The serpentine group is represented by a single asbestiform variety-chrysotile. There also are five commercial asbestiform varieties of amphiboles-anthophyllite asbestos, cummingtonite-grunerite asbestos (amosite), riebeckite asbestos (crocidolite), tremolite asbestos, and actinolite asbestos. Amosite and crocidolite are no longer mined. Nearly all of the asbestos mined after the mid-1990s was chrysotile. Only very small amounts of actinolite, anthophyllite, and tremolite asbestos may be mined in a few countries. Asbestos was mined in Argentina, Brazil, Canada, China, India, Kazakhstan, and Russia in 2010; world production was estimated to be 1.97 × 106 tons. Properties that made asbestos valuable for industrial applications were their thermal, electrical, and sound insulation properties; inflammability; matrix reinforcement (cement, plastic, and resins); adsorption capacity (filtration, liquid sterilization); wear and friction properties (friction materials such as brakes and clutches); and chemical inertia (except in acids). These properties led to the use of asbestos in about 3,000 products by the 1960s. Since about 1995, asbestos-cement products, including pipe and sheets, accounted for more than 95% of global asbestos consumption as other uses of asbestos have declined. Global consumption of asbestos was estimated to have been about 1.98 × 106 tons in 2009. The leading consuming countries in 2009 were Brazil, China, India, Russia, and Thailand, each with more than 100,000 tons of consumption.

  16. Assessment of airborne asbestos exposure during the servicing and handling of automobile asbestos-containing gaskets.

    Science.gov (United States)

    Blake, Charles L; Dotson, G Scott; Harbison, Raymond D

    2006-07-01

    Five test sessions were conducted to assess asbestos exposure during the removal or installation of asbestos-containing gaskets on vehicles. All testing took place within an operative automotive repair facility involving passenger cars and a pickup truck ranging in vintage from late 1960s through 1970s. A professional mechanic performed all shop work including engine disassembly and reassembly, gasket manipulation and parts cleaning. Bulk sample analysis of removed gaskets through polarized light microscopy (PLM) revealed asbestos fiber concentrations ranging between 0 and 75%. Personal and area air samples were collected and analyzed using National Institute of Occupational Safety Health (NIOSH) methods 7400 [phase contrast microscopy (PCM)] and 7402 [transmission electron microscopy (TEM)]. Among all air samples collected, approximately 21% (n = 11) contained chrysotile fibers. The mean PCM and phase contrast microscopy equivalent (PCME) 8-h time weighted average (TWA) concentrations for these samples were 0.0031 fibers/cubic centimeters (f/cc) and 0.0017 f/cc, respectively. Based on these findings, automobile mechanics who worked with asbestos-containing gaskets may have been exposed to concentrations of airborne asbestos concentrations approximately 100 times lower than the current Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) of 0.1 f/cc.

  17. Exposures to asbestos arising from bandsawing gasket material.

    Science.gov (United States)

    Fowler, D P

    2000-05-01

    A simulation of bandsawing sheet asbestos gasket material was performed as part of a retrospective exposure evaluation undertaken to assist in determining causation of a case of mesothelioma. The work was performed by bandsawing a chrysotile asbestos (80%)/neoprene gasket sheet with a conventional 16-inch woodworking bandsaw inside a chamber. Measurements of airborne asbestos were made using conventional area and personal sampling methods, with analysis of collected samples by transmission electron microscopy (TEM) and phase contrast microscopy (PCM). These were supplemented by qualitative scanning electron microscopy (SEM) examinations of some of the airborne particles collected on the filters. In contrast with findings from studies examining manual handling (installation and removal) of gaskets, airborne asbestos concentrations from this operation were found to be well above current Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) (eight-hour time-weighted average [TWA]) and excursion limit (30-minute) standards. Although some "encapsulation" effect of the neoprene matrix was seen on the particles in the airborne dust, unencapsulated individual fiber bundles were also seen. Suggestions for the implications of the work are given. In summary, the airborne asbestos concentrations arising from this work were quite high, and point to the need for careful observation of common sense precautions when manipulation of asbestos-containing materials (even those believed to have limited emissions potential) may involved machining operations.

  18. Validity and Reliability of Asbestos Knowledge and Awareness Questionnaire for Environmental Asbestos Exposure in Rural Areas

    Directory of Open Access Journals (Sweden)

    Selma Metintaş

    2017-04-01

    Full Text Available Objective: There is no treatment for asbestos–related diseases, but they can be prevented. One of the first interventions is to improve the knowledge level of people in order to protect people from asbestos and asbestos–related diseases. The present study was conducted to develop a questionnaire for measuring the knowledge and awareness level of asbestos and also assess its validity and reliability in a rural population that is exposed to asbestos environmentally. Methods: A questionnaire, interviewer–administered, that included 37 items was employed on a convenient sample consisting of adult persons who attended a tertiary teaching hospital in Eskişehir where asbestos exposure is widespread in its rural areas. After assessment of validity and reliability of the results, the questionnaire was refined to 19 items and one subscale. Results: A total of 760 participants were included in this study. The mean age of participants was 53.2±15.1 years and 51.6% of them were male. The discrimination and difficulty indices of the asbestos knowledge and awareness questionnaire ranged between 20.0–60.5% and 0.39–0.98, respectively. Cronbach’s alpha coefficient was 0.951 for overall items. The median (min–max and mean (SD score of the study population were 30 (19–56 and 33.9 (11.9, respectively. The score increased correspondingly with greater knowledge levels. Conclusion: This questionnaire is a practical and easy tool to apply with acceptable reliability and validity on high-risk adults in rural areas with environmental asbestos exposure.

  19. Cancer mortality in Chinese chrysotile asbestos miners: exposure-response relationships.

    Directory of Open Access Journals (Sweden)

    Xiaorong Wang

    Full Text Available OBJECTIVE: This study was conducted to assess the relationship of mortality from lung cancer and other selected causes to asbestos exposure levels. METHODS: A cohort of 1539 male workers from a chrysotile mine in China was followed for 26 years. Data on vital status, occupation and smoking were collected from the mine records and individual contacts. Causes and dates of death were further verified from the local death registry. Individual cumulative fibre exposures (f-yr/ml were estimated based on converted dust measurements and working years at specific workshops. Standardized mortality ratios (SMRs for lung cancer, gastrointestinal (GI cancer, all cancers and nonmalignant respiratory diseases (NMRD stratified by employment years, estimated cumulative fibre exposures, and smoking, were calculated. Poisson models were fitted to determine exposure-response relationships between estimated fibre exposures and cause-specific mortality, adjusting for age and smoking. RESULTS: SMRs for lung cancer increased with employment years at entry to the study, by 3.5-fold in ≥ 10 years and 5.3-fold in ≥ 20 years compared with <10 years. A similar trend was seen for NMRD. Smokers had greater mortality from all causes than nonsmokers, but the latter also had slightly increased SMR for lung cancer. No excess lung cancer mortality was observed in cumulative exposures of <20 f-yrs/ml. However, significantly increased mortality was observed in smokers at the levels of ≥ 20 f-yrs/ml and above, and in nonsmokers at ≥ 100 f-yrs/ml and above. A similarly clear gradient was also displayed for NMRD. The exposure-response relationships with lung cancer and NMRD persisted in multivariate analysis. Moreover, a clear gradient was shown in GI cancer mortality when age and smoking were adjusted for. CONCLUSION: There were clear exposure-response relationships in this cohort, which imply a causal link between chrysotile asbestos exposure and lung cancer and nonmalignant

  20. Asbestos exposure among transmission mechanics in automotive repair shops.

    Science.gov (United States)

    Salazar, Natalia; Cely-García, María Fernanda; Breysse, Patrick N; Ramos-Bonilla, Juan Pablo

    2015-04-01

    Asbestos has been used in a broad variety of industrial products, including clutch discs of the transmission system of vehicles. Studies conducted in high-income countries that have analyzed personal asbestos exposures of transmission mechanics have concluded that these workers are exposed to asbestos concentrations in compliance with the US Occupational Safety and Health Administration (US OSHA) occupational standards. Clutch facings are the friction component of clutch discs. If clutch facings are sold separated from the support, they require manipulation before installation in the vehicle. The manipulation of asbestos containing clutch facings is performed by a group of mechanics known as riveters, and includes drilling, countersinking, riveting, sanding, and occasionally grinding, tasks that can potentially release asbestos fibers, exposing the mechanics. These manipulation activities are not reported in studies conducted in high-income countries. This study analyzes personal asbestos exposures of transmission mechanics that manipulate clutch facings. Air sampling campaigns in two transmission repair shops (TRS) were conducted in November 2012 and July 2013 in Bogotá, Colombia. Four workers employed in these TRS were sampled (i.e. three riveters and one supervisor). Personal samples (n = 39), short-term personal samples (n = 49), area samples (n = 52), blank samples (n = 8), and background samples (n = 2) were collected in both TRS during 3-5 consecutive days, following US National Institute for Occupational Safety and Health (US NIOSH) methods 7400 and 7402. Asbestos samples were analyzed by an American Industrial Hygiene Association accredited laboratory. On at least one of the days sampled, all riveters were exposed to asbestos concentrations that exceeded the US OSHA permissible exposure limit or the Colombian permissible limit value. Additionally, from the forty-seven 30-min short-term personal samples collected, two (4.3%) exceeded the US OSHA excursion

  1. Airborne Asbestos Exposures from Warm Air Heating Systems in Schools.

    Science.gov (United States)

    Burdett, Garry J; Dewberry, Kirsty; Staff, James

    2016-01-01

    The aim of this study was to investigate the concentrations of airborne asbestos that can be released into classrooms of schools that have amosite-containing asbestos insulation board (AIB) in the ceiling plenum or other spaces, particularly where there is forced recirculation of air as part of a warm air heating system. Air samples were collected in three or more classrooms at each of three schools, two of which were of CLASP (Consortium of Local Authorities Special Programme) system-built design, during periods when the schools were unoccupied. Two conditions were sampled: (i) the start-up and running of the heating systems with no disturbance (the background) and (ii) running of the heating systems during simulated disturbance. The simulated disturbance was designed to exceed the level of disturbance to the AIB that would routinely take place in an occupied classroom. A total of 60 or more direct impacts that vibrated and/or flexed the encapsulated or enclosed AIB materials were applied over the sampling period. The impacts were carried out at the start of the sampling and repeated at hourly intervals but did not break or damage the AIB. The target air volume for background samples was ~3000 l of air using a static sampler sited either below or ~1 m from the heater outlet. This would allow an analytical sensitivity (AS) of 0.0001 fibres per millilitre (f ml(-1)) to be achieved, which is 1000 times lower than the EU and UK workplace control limit of 0.1 f ml(-1). Samples with lower volumes of air were also collected in case of overloading and for the shorter disturbance sampling times used at one site. The sampler filters were analysed by phase contrast microscopy (PCM) to give a rapid determination of the overall concentration of visible fibres (all types) released and/or by analytical transmission electron microscopy (TEM) to determine the concentration of asbestos fibres. Due to the low number of fibres, results were reported in terms of both the calculated

  2. Occupational exposure to asbestos and risk of cholangiocarcinoma: a population-based case–control study in four Nordic countries

    Science.gov (United States)

    Farioli, Andrea; Straif, Kurt; Brandi, Giovanni; Curti, Stefania; Kjaerheim, Kristina; Martinsen, Jan Ivar; Sparen, Pär; Tryggvadottir, Laufey; Weiderpass, Elisabete; Biasco, Guido; Violante, Francesco Saverio; Mattioli, Stefano; Pukkala, Eero

    2018-01-01

    Objectives To assess the association between occupational exposure to asbestos and the risk of cholangiocarcinoma (CC). Methods We conducted a case–control study nested in the Nordic Occupational Cancer (NOCCA) cohort. We studied 1458 intrahepatic CC (ICC) and 3972 extrahepatic CC (ECC) cases occurring among subjects born in 1920 or later in Finland, Iceland, Norway and Sweden. Each case was individually matched by birth year, gender and country to five population controls. The cumulative exposure to asbestos (measured in fibres (f)/ml × years) was assessed by applying the NOCCA job-exposure matrix to data on occupations collected during national population censuses (conducted in 1960, 1970, 1980/81 and 1990). Odds ratios (OR) and 95% CI were estimated using conditional logistic regression models adjusted by printing industry work. Results We observed an increasing risk of ICC with cumulative exposure to asbestos: never exposed, OR 1.0 (reference category); 0.1–4.9 f/mL × years, OR 1.1 (95% CI 0.9 to 1.3); 5.0–9.9 f/mL × years, OR 1.3 (95% CI 0.9 to 2.1); 10.0–14.9 f/mL × years, OR 1.6 (95% CI 1.0 to 2.5); ≥15.0 f/mL × years, OR 1.7 (95% CI 1.1 to 2.6). We did not observe an association between cumulative asbestos exposure and ECC. Conclusions Our study provides evidence that exposure to asbestos might be a risk factor for ICC. Our findings also suggest that the association between ECC and asbestos is null or weaker than that observed for ICC. Further studies based on large industrial cohorts of asbestos workers and possibly accounting for personal characteristics and clinical history are needed. PMID:29133597

  3. Asbestos exposure-cigarette smoking interactions among shipyard workers

    International Nuclear Information System (INIS)

    Blanc, P.D.; Golden, J.A.; Gamsu, G.; Aberle, D.R.; Gold, W.M.

    1988-01-01

    The authors studied the roentgenograms, pulmonary function tests, and physical findings of 294 shipyard workers to evaluate asbestos exposure-cigarette smoking interactions. Roentgenographic parenchymal opacities, decreased pulmonary diffusing capacity for carbon monoxide, decreased flow at low lung volume, rales, and clubbing were each significantly related to the number of years elapsed since first exposure to asbestos and cigarette smoking status when analyzed by logistic regression. A dose-dependent cigarette smoking response that was consistent with synergism was present only for parenchymal opacities and decreased flow at low lung volume. These findings suggest that decreased flow at low lung volume, possibly reflecting peribronchiolar fibrosis, may be a functional corollary to smoking-associated parenchymal roentgenographic opacities among some asbestos-exposed individuals

  4. Developing Asbestos Job Exposure Matrix Using Occupation and Industry Specific Exposure Data (1984–2008 in Republic of Korea

    Directory of Open Access Journals (Sweden)

    Sangjun Choi

    2017-03-01

    Conclusion: The newly constructed GPJEM which is generated from actual domestic quantitative exposure data could be useful in evaluating historical exposure levels to asbestos and could contribute to improved prediction of asbestos-related diseases among Koreans.

  5. Malignant mesothelioma due to non-occupational asbestos exposure from the Italian national surveillance system (ReNaM): epidemiology and public health issues.

    Science.gov (United States)

    Marinaccio, Alessandro; Binazzi, Alessandra; Bonafede, Michela; Corfiati, Marisa; Di Marzio, Davide; Scarselli, Alberto; Verardo, Marina; Mirabelli, Dario; Gennaro, Valerio; Mensi, Carolina; Schallemberg, Gert; Merler, Enzo; Negro, Corrado; Romanelli, Antonio; Chellini, Elisabetta; Silvestri, Stefano; Cocchioni, Mario; Pascucci, Cristiana; Stracci, Fabrizio; Ascoli, Valeria; Trafficante, Luana; Angelillo, Italo; Musti, Marina; Cavone, Domenica; Cauzillo, Gabriella; Tallarigo, Federico; Tumino, Rosario; Melis, Massimo

    2015-09-01

    Italy produced and imported a large amount of raw asbestos, up to the ban in 1992, with a peak in the period between 1976 and 1980 at about 160,000 tons/year. The National Register of Mesotheliomas (ReNaM, "Registro Nazionale dei Mesoteliomi" in Italian), a surveillance system of mesothelioma incidence, has been active since 2002, operating through a regional structure. The Operating Regional Center (COR) actively researches cases and defines asbestos exposure on the basis of national guidelines. Diagnostic, demographic and exposure characteristics of non-occupationally exposed cases are analysed and described with respect to occupationally exposed cases. Standardised incidence rates for pleural mesothelioma in 2008 were 3.84 (per 100,000) for men and 1.45 for women, respectively. Among the 15,845 mesothelioma cases registered between 1993 and 2008, exposure to asbestos fibres was investigated for 12,065 individuals (76.1%), identifying 530 (4.4%) with familial exposure (they lived with an occupationally exposed cohabitant), 514 (4.3%) with environmental exposure to asbestos (they lived near sources of asbestos pollution and were never occupationally exposed) and 188 (1.6%) exposed through hobby-related or other leisure activities. Clusters of cases due to environmental exposure are mainly related to the presence of asbestos-cement industry plants (Casale Monferrato, Broni, Bari), to shipbuilding and repair activities (Monfalcone, Trieste, La Spezia, Genova) and soil contamination (Biancavilla in Sicily). Asbestos pollution outside the workplace contributes significantly to the burden of asbestos-related diseases, suggesting the need to prevent exposures and to discuss how to deal with compensation rights for malignant mesothelioma cases induced by non-occupational exposure to asbestos. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  6. Asbestos exposure in Israel: findings, issues and needs

    Energy Technology Data Exchange (ETDEWEB)

    Richter, E.D.

    1984-02-01

    In Israel, since the 1950s, at least several thousand workers, their wives and children, and possibly many others, have been or still may be exposed to hazardous amounts of airborne asbestos fibers. These are found both in asbestos-based industries (asbestos cement, textiles and brake linings) and trades with asbestos exposure (construction, shipyard repair, boiler maintenance, insulation work). These people are at increased risk for disability or illness, or for premature death from asbestosis, from lung cancer, from exacerbation of preexisting respiratory disease (especially if they smoke), from mesothelioma, from gastrointestinal cancer, and from other malignancies. Although there has been progress, much still has to be done in the areas of legislation, standard setting, exposure control, technology, surveillance, smoking cessation, and medical care and follow-up. Compensation is needed to care for those workers currently or previously exposed, as well as for their families and others at risk. A national policy for protecting and caring for those formerly or currently exposed is indicated by the review of the situation in Israel.

  7. OccIDEAS: An Innovative Tool to Assess Past Asbestos Exposure in the Australian Mesothelioma Registry

    Directory of Open Access Journals (Sweden)

    Ewan MacFarlane

    2012-03-01

    Full Text Available Malignant mesothelioma is an uncommon but rapidly fatal disease for which the principal aetiological agent is exposure to asbestos. Mesothelioma is of particular significance in Australia where asbestos use was very widespread from the 1950s until the 1980s. Exposure to asbestos includes occupational exposure associated with working with asbestos or in workplaces where asbestos is used and also ‘take-home’ exposure of family members of asbestos exposed workers. Asbestos exposure may also be nonoccupational, occurring as a consequence of using asbestos products in non-occupational contexts and passive exposure is also possible, such as exposure to asbestos products in the built environment or proximity to an environmental source of exposure, for example an asbestos production plant. The extremely long latency period for this disease makes exposure assessment problematic in the context of a mesothelioma registry. OccIDEAS, a recently developed online tool for retrospective exposure assessment, has been adapted for use in the Australian Mesothelioma Registry (AMR to enable systematic retrospective exposure assessment of consenting cases. Twelve occupational questionnaire modules and one non-occupational module have been developed for the AMR, which form the basis of structured interviews using OccIDEAS, which also stores collected data and provides a framework for generating metrics of exposure.

  8. Gender differences in asbestos exposure and disease location in 327 patients with mesothelioma

    DEFF Research Database (Denmark)

    Panou, Vasiliki; Weinreich, Ulla Moller; Bak, Jens

    2017-01-01

    Introduction: The Region of North Denmark has a high incidence of malignant mesothelioma (MM) of 6.2/100.000 for men and 1/100.000 for women mainly due to large-scale use of chrysotile asbestos.Aims: The aim of the study is to investigate gender differences in asbestos exposure and disease location...... workers; domestic, referring to patients living with an asbestos worker; environmental, defined as living or working within 10.000 meters from asbestos emitting location; unknown, where no source of asbestos exposure could be identified. MM location was classified as pleural (MPM) or peritoneal (MAM...

  9. The impact of asbestos exposure in Swedish construction workers.

    Science.gov (United States)

    Järvholm, Bengt; Englund, Anders

    2014-01-01

    To study the occurrence of pleural mesothelioma as a measure of the impact on health from asbestos exposure in the construction industry. The occurrence of pleural mesothelioma in different occupations, time periods and birth cohorts was studied in a cohort of construction workers. They were prospectively followed after they had participated in health examinations between 1971 and 1993. The analysis was restricted to men and in total 367,568 men was included in the analysis. In total there were 419 cases of pleural mesotheliomas between 1972 and 2009. As expected the age adjusted incidence was high in insulation workers and plumbers (39 and 16 cases per 100,000 person-years, respectively). However, only 21% of the pleural mesotheliomas occurred in those occupational groups. Occupational groups with many cases of pleural mesothelioma were concrete workers (N = 56), wood workers (N = 55), painters (N = 32), electricians (N = 48), and foremen (N = 37). The highest risk was in birth cohorts born between 1935 and 1945. Between 1995 and 2009 around one-third of all male cases in the country occurred in this birth cohort. The risk seemed to decrease considerably in men born after 1955. In Sweden a considerable proportion of pleural mesotheliomas occur among construction workers; and not only in jobs traditionally associated with asbestos exposure such as insulators and plumbers but also among electricians, for example. The results shows that asbestos exposure occurs in many occupational groups, indicating that safe handling of asbestos is a very difficult or even impossible task in the construction industry. © 2013 Wiley Periodicals, Inc.

  10. Non-malignant consequences of decreasing asbestos exposure in the Brazil chrysotile mines and mills.

    Science.gov (United States)

    Bagatin, E; Neder, J A; Nery, L E; Terra-Filho, M; Kavakama, J; Castelo, A; Capelozzi, V; Sette, A; Kitamura, S; Favero, M; Moreira-Filho, D C; Tavares, R; Peres, C; Becklake, M R

    2005-06-01

    To investigate the consequences of improvement in the workplace environment over six decades (1940-96) in asbestos miners and millers from a developing country (Brazil). A total of 3634 Brazilian workers with at least one year of exposure completed a respiratory symptoms questionnaire, chest radiography, and a spirometric evaluation. The study population was separated into three groups whose working conditions improved over time: group I (1940-66, n = 180), group II (1967-76, n = 1317), and group III (1977-96, n = 2137). Respiratory symptoms were significantly related to spirometric abnormalities, smoking, and latency time. Breathlessness, in particular, was also associated with age, pleural abnormality and increased cumulative exposure to asbestos fibres. The odds ratios (OR) for parenchymal and/or non-malignant pleural disease were significantly lower in groups II and III compared to group I subjects (0.29 (0.12-0.69) and 0.19 (0.08-0.45), respectively), independent of age and smoking status. Similar results were found when groups were compared at equivalent latency times (groups I v II: 30-45 years; groups II v III: 20-25 years). Ageing, dyspnoea, past and current smoking, and radiographic abnormalities were associated with ventilatory impairment. Lower spirometric values were found in groups I and II compared to group III: lung function values were also lower in higher quartiles of latency and of cumulative exposure in these subjects. Progressive improvement in occupational hygiene in a developing country is likely to reduce the risk of non-malignant consequences of dust inhalation in asbestos miners and millers.

  11. Asbestos: Protect Your Family

    Science.gov (United States)

    ... Related Topics: Asbestos Contact Us Share Protect Your Family How to Identify Materials That May Contain Asbestos ... Improper removal may actually increase your and your family’s exposure to asbestos fibers. Top of Page Asbestos ...

  12. Evaluation for asbestos exposure in lung cancer surgery cases. Relationships between asbestos body count and pleural plaques and between asbestos body count and pulmonary fibrosis

    International Nuclear Information System (INIS)

    Yusa, Toshikazu; Yasukawa, Tomohisa; Shioda, Hironobu; Hirai, Fumiko; Hiroshima, Kenzo; Kishimoto, Takumi

    2011-01-01

    This study was designed to examine the significance of pleural plaques and pulmonary fibrosis in the evaluation of asbestos exposure level. The subjects were patients who had undergone surgery for lung cancer. There were 64 patients who had pleural plaques based on surgical findings (pleural plaque group) and 9 patients who had neither a history of asbestos exposure nor pleural plaque (control group). An examination was performed regarding the extent of pleural plaques and the presence or absence of pulmonary fibrosis. The relationships between these findings and the asbestos body count in the resected lung were investigated. If chest CT showed no pleural plaque, the case was classified as class 0. If chest CT showed pleural plaques, the CT slice with the most extensive pleural plaque in either side was selected. If the plaque extended to less than one quarter of the inner chest wall, the case was classified as class 1. If the extent was one quarter or more, the case was classified as class 2. The cases were considered to have pulmonary fibrosis if the fibrotic findings were equivalent to those of asbestosis of type 1 or more by chest X-ray photography (XP) and if fibrosis was observed in CT. All other cases were considered not to have pulmonary fibrosis. The median asbestos body counts were 1,018 bodies per gram of dried lung in the pleural plaque group and 263 per gram of dried lung in the control group. There was a statistically significant difference between these groups (p=0.0034). There were 25 patients with class 0 pleural plaque, 17 patients with class 1, and 22 patients with class 2. Their median asbestos body counts were 612, 439, and 5,626 bodies, respectively. All class 0 or 1 patients had an asbestos body count of less than 5,000 bodies. There was no significant difference in the counts between patients with class 0 and 1. All class 2 patients had an asbestos body count of 1,000 bodies or more. The count of class 2 patients was significantly higher

  13. Chemical characterization of exhaled breath to differentiate between patients with malignant plueral mesothelioma from subjects with similar professional asbestos exposure

    Energy Technology Data Exchange (ETDEWEB)

    Gennaro, G. de; Longobardi, F.; Stallone, G.; Trizio, L.; Tutino, M. [University of Bari Aldo Moro, Department of Chemistry, Bari (Italy); Dragonieri, S. [University of Bari Aldo Moro, Department of Pulmonology, Bari (Italy); Musti, M. [University of Bari Aldo Moro, Department of Occupational Medicine, Bari (Italy)

    2010-12-15

    Malignant pleural mesothelioma (MPM) is an aggressive tumour whose main aetiology is the long-term exposure to asbestos fibres. The diagnostic procedure of MPM is difficult and often requires invasive approaches; therefore, it is clinically important to find accurate markers for MPM by new noninvasive methods that may facilitate the diagnostic process and identify patients at an earlier stage. In the present study, the exhaled breath of 13 patients with histology-established diagnosis of MPM, 13 subjects with long-term certified professional exposure to asbestos (EXP) and 13 healthy subjects without exposure to asbestos (healthy controls, HC) were analysed. An analytical procedure to determine volatile organic compounds by sampling of air on a bed of solid sorbent and thermal desorption GC-MS analysis was developed in order to identify the compounds capable of discriminating among the three groups. The application of univariate (ANOVA) and multivariate statistical treatments (PCA, DFA and CP-ANN) showed that cyclopentane and cyclohexane were the dominant variables able to discriminate among the three groups. In particular, it was found that cyclohexane is the only compound able to differentiate the MPM group from the other two; therefore, it can be a possible marker of MPM. Cyclopentane is the dominant compound in the discrimination between EXP and the other groups (MPM and HC); then, it can be considered a good indicator for long-term asbestos exposure. This result suggests the need to perform frequent and thorough investigations on people exposed to asbestos in order to constantly monitor their state of health or possibly to study the evolution of disease over time. (orig.)

  14. Expected number of asbestos-related lung cancers in the Netherlands in the next two decades : a comparison of methods

    NARCIS (Netherlands)

    Van der Bij, Sjoukje; Vermeulen, Roel C H; Portengen, Lützen; Moons, Karel G M; Koffijberg, Hendrik

    2016-01-01

    OBJECTIVES: Exposure to asbestos fibres increases the risk of mesothelioma and lung cancer. Although the vast majority of mesothelioma cases are caused by asbestos exposure, the number of asbestos-related lung cancers is less clear. This number cannot be determined directly as lung cancer causes are

  15. Occupational asbestos exposure and risk of pleural mesothelioma, lung cancer, and laryngeal cancer in the prospective netherlands cohort study

    NARCIS (Netherlands)

    Offermans, N.S.M.; Vermeulen, R.; Burdorf, A.; Goldbohm, R.A.; Kauppinen, T.; Kromhout, H.; Brandt, P.A. van den

    2014-01-01

    OBJECTIVE:: To study the association between occupational asbestos exposure and pleural mesothelioma, lung cancer, and laryngeal cancer, specifically addressing risk associated with the lower end of the exposure distribution, risk of cancer subtypes, and the interaction between asbestos and smoking.

  16. Occupational exposure to asbestos and risk of cholangiocarcinoma: a population-based case-control study in four Nordic countries.

    Science.gov (United States)

    Farioli, Andrea; Straif, Kurt; Brandi, Giovanni; Curti, Stefania; Kjaerheim, Kristina; Martinsen, Jan Ivar; Sparen, Pär; Tryggvadottir, Laufey; Weiderpass, Elisabete; Biasco, Guido; Violante, Francesco Saverio; Mattioli, Stefano; Pukkala, Eero

    2018-03-01

    To assess the association between occupational exposure to asbestos and the risk of cholangiocarcinoma (CC). We conducted a case-control study nested in the Nordic Occupational Cancer (NOCCA) cohort. We studied 1458 intrahepatic CC (ICC) and 3972 extrahepatic CC (ECC) cases occurring among subjects born in 1920 or later in Finland, Iceland, Norway and Sweden. Each case was individually matched by birth year, gender and country to five population controls. The cumulative exposure to asbestos (measured in fibres (f)/ml × years) was assessed by applying the NOCCA job-exposure matrix to data on occupations collected during national population censuses (conducted in 1960, 1970, 1980/81 and 1990). Odds ratios (OR) and 95% CI were estimated using conditional logistic regression models adjusted by printing industry work. We observed an increasing risk of ICC with cumulative exposure to asbestos: never exposed, OR 1.0 (reference category); 0.1-4.9 f/mL × years, OR 1.1 (95% CI 0.9 to 1.3); 5.0-9.9 f/mL × years, OR 1.3 (95% CI 0.9 to 2.1); 10.0-14.9 f/mL × years, OR 1.6 (95% CI 1.0 to 2.5); ≥15.0 f/mL × years, OR 1.7 (95% CI 1.1 to 2.6). We did not observe an association between cumulative asbestos exposure and ECC. Our study provides evidence that exposure to asbestos might be a risk factor for ICC. Our findings also suggest that the association between ECC and asbestos is null or weaker than that observed for ICC. Further studies based on large industrial cohorts of asbestos workers and possibly accounting for personal characteristics and clinical history are needed. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  17. Global Asbestos Disaster

    Directory of Open Access Journals (Sweden)

    Sugio Furuya

    2018-05-01

    Full Text Available Introduction: Asbestos has been used for thousands of years but only at a large industrial scale for about 100–150 years. The first identified disease was asbestosis, a type of incurable pneumoconiosis caused by asbestos dust and fibres. The latest estimate of global number of asbestosis deaths from the Global Burden of Disease estimate 2016 is 3495. Asbestos-caused cancer was identified in the late 1930’s but despite today’s overwhelming evidence of the strong carcinogenicity of all asbestos types, including chrysotile, it is still widely used globally. Various estimates have been made over time including those of World Health Organization and International Labour Organization: 107,000–112,000 deaths. Present estimates are much higher. Objective: This article summarizes the special edition of this Journal related to asbestos and key aspects of the past and present of the asbestos problem globally. The objective is to collect and provide the latest evidence of the magnitude of asbestos-related diseases and to provide the present best data for revitalizing the International Labor Organization/World Health Organization Joint Program on Asbestos-related Diseases. Methods: Documentation on asbestos-related diseases, their recognition, reporting, compensation and prevention efforts were examined, in particular from the regulatory and prevention point of view. Estimated global numbers of incidence and mortality of asbestos-related diseases were examined. Results: Asbestos causes an estimated 255,000 deaths (243,223–260,029 annually according to latest knowledge, of which work-related exposures are responsible for 233,000 deaths (222,322–242,802. In the European Union, United States of America and in other high income economies (World Health Organization regional classification the direct costs for sickness, early retirement and death, including production losses, have been estimated to be very high; in the Western European countries and

  18. Study on the concentration of airbone respirable asbestos fibres in rural areas of the Lublin region in south-east Poland

    Directory of Open Access Journals (Sweden)

    Agnieszka Buczaj

    2014-09-01

    Full Text Available Objective. The objective of the study was measurement of the concentrations of airborne asbestos fibres in the rural environment of the Lublin Region in south-east Poland. Methods. Measurements of concentrations of respirable asbestos fibres were carried out in the rural areas of the Lublin Region (Lublin and Włodawa counties for a period of 24 months. The studies were conducted on 3 farms with various technical conditions of asbestos-containing materials: Farm A – good technical condition of asbestos products, Farm B – poor technical condition, and Farm C – with no asbestos containing products and no such products in its direct vicinity (up to 500 m. On the selected farms, 3 samples on each were simultaneously collected at 3 measuring sites. During the period 2009–2011, a total number of 216 samples were collected on all farms. Sampling was performed using JSH 16,000 stationary aspirators, with air flow velocity of 16 l/min. and sampling time 60–80 minutes. The number of fibres on filters was determined using an optical phase contrast microscope. Results. The study showed that the mean concentration of respirable asbestos fibres on the farms examined was 296 fibres•m [sup]-3[/sup]. The highest concentrations were noted on Farm B was 529 fibres•m [sup]-3[/sup], on average; on farm A the mean concentration of respirable fibres was 328 fibres•m [sup]-3[/sup] , whereas the lowest mean concentration of airborne respirable asbestos fibres was noted on farm C, where there were no asbestos products (30 fibres•m [sup]-3[/sup] .

  19. Asbestos exposure and health hazards: a global emergency, Epidemiological evidence and denial theories

    Directory of Open Access Journals (Sweden)

    Francesca Zazzara

    2013-11-01

    Full Text Available On June 3rd 2013, in Turin, Italy, the Swiss industrialist Schmidheiny has been sentenced to 18 years imprisonment for intentional disaster for 3,000 asbestos-linked tumours in Italian workers at cement multinational Eternit. The indiscriminate use of asbestos, however, continues worldwide. Although many studies have shown that asbestos is associated with an increased risk of mortality and morbidity, denial theories were spread over time, showing how the logic of profit governs the production of asbestos. We examined the history of the epidemiological evidence of asbestos related risks and, second, the main sources of exposure in Italy and in the world, occupational, non-occupational, and post-disaster exposure (as occurred after L’Aquila earthquake in April 2009. The theme of inequality and social justice is ever so alarming in the fight against asbestos and its lobbies.

  20. Time-dependent effect of intensity of smoking and of occupational exposure to asbestos on the risk of lung cancer: results from the ICARE case-control study.

    Science.gov (United States)

    Lévêque, Emilie; Lacourt, Aude; Luce, Danièle; Sylvestre, Marie-Pierre; Guénel, Pascal; Stücker, Isabelle; Leffondré, Karen

    2018-05-18

    To estimate the impact of intensity of both smoking and occupational exposure to asbestos on the risk of lung cancer throughout the whole exposure history. Data on 2026 male cases and 2610 male controls came from the French ICARE (Investigation of occupational and environmental causes of respiratory cancers) population-based, case-control study. Lifetime smoking history and occupational history were collected from standardised questionnaires and face-to-face interviews. Occupational exposure to asbestos was assessed using a job exposure matrix. The effects of annual average daily intensity of smoking (reported average number of cigarettes smoked per day) and asbestos exposure (estimated average daily air concentration of asbestos fibres at work) were estimated using a flexible weighted cumulative index of exposure in logistic regression models. Intensity of smoking in the 10 years preceding diagnosis had a much stronger association with the risk of lung cancer than more distant intensity. By contrast, intensity of asbestos exposure that occurred more than 40 years before diagnosis had a stronger association with the risk of lung cancer than more recent intensity, even if intensity in the 10 years preceding diagnosis also had a significant effect. Our results illustrate the dynamic of the effect of intensity of both smoking and occupational exposure to asbestos on the risk of lung cancer. They confirm that the timing of exposure plays an important role, and suggest that standard analytical methods assuming equal weights of intensity over the whole exposure history may be questionable. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  1. Natural fibre reinforced non-asbestos organic non-metallic friction composites: effect of abaca fibre on mechanical and tribological behaviour

    Science.gov (United States)

    Liu, Yucheng; Ma, Yunhai; Che, Junjian; Duanmu, Lingjian; Zhuang, Jian; Tong, Jin

    2018-05-01

    To obtain a natural fibre reinforced non-asbestos organic non-metallic friction composite with good wear resistance and environmental-friendly performances, friction composites reinforced with different lengths of abaca fibre were fabricated by a compression molder equipment and evaluated by using a constant-speed friction test machine. The worn surface morphologies were observed and analyzed using a Scanning Electron Microscopy (SEM). Experimental results show that the length of abaca fibre had no significant effect on the density and hardness, but was obvious on impact strength. The impact strength increased and then decreased with the increasing of length of abaca fibres. Abaca fibres, especially short fibre (lengths of 5 mm, 10 mm), could improve the wear resistance of the friction composites. Meanwhile, the increase of test temperature could result in the increasing of wear rates of the friction composites. A large amount of secondary plateaux presented on the worn surface of specimens FC1 and FC2 which showe relatively smooth worn surfaces and yield the better wear resistance performance.

  2. [Role of biometric analysis in the retrospective assessment of exposure to asbestos].

    Science.gov (United States)

    Pairon, J C; Dumortier, P

    1999-12-01

    Despite intrinsic limitations due to differences in the bio-persistence of the various asbestos types, in the definition of control populations and in analytical techniques used by the laboratories, mineralogical analysis of biological samples is useful in the assessment of past exposure to asbestos. It provides additional information to occupational and environmental questionnaires, particularly when exposure to asbestos is doubtful, unknown or forgotten by a subject. Results should be interpreted taking into account clinical information. A positive result does not mean existence of asbestos-related disease. A negative result does not exclude previous significant asbestos exposure, clearly identified by an occupational questionnaire (particularly for exposure to chrysotile). Threshold values indicative of a high probability of previous asbestos exposure have been established for bronchoalveolar lavage fluid (BALF) samples and lung tissue samples. Quantification of asbestos bodies by light microscopy is easy to perform. Sensitivity and specificity of this analysis towards the total pulmonary asbestos fiber burden is good. Therefore this analysis should be performed first. Mineralogical analysis in BALF or lung tissue should be considered only when sampling is supported by diagnostic or therapeutic implications.

  3. [Relationship between asbestos exposure and malignant pleural mesothelioma: occurrence near the old Japanese naval shipyard].

    Science.gov (United States)

    Kishimoto, T

    1994-12-01

    Kure City, Hiroshima Prefecture, was the site of a Japanese naval shipyard before World War II, and commercial ships were built there after the War. Large amounts of asbestos were used in this area primarily for shipbuilding, from before the war to around 1975. Probably due to exposure to asbestos, the incidence of malignant pleural mesothelioma is high in this city. Of the 31 patients with this disease, 27 were men. Patients over 60 years of age constituted a high percentage of the total and 28 had a history of asbestos exposure: 12 in the Japanese naval shipyard and 12 in the commercial shipyards. The average period of asbestos exposure for these 28 patients was 20 years. Malignant pleural mesothelioma developed more than 40 years after the first exposure to asbestos. Many asbestos particles and fibers were detected in the lungs and tumors of these patients. Most of the asbestos fibers detected were crocidolites or amosites. Considering that the amount of asbestos used in Japanese has been higher than in any other country, the incidence of malignant pleural mesothelioma may be expected to increase in this country. Countermeasures are now advisable.

  4. [Possible health risks from asbestos in drinking water].

    Science.gov (United States)

    Di Ciaula, Agostino; Gennaro, Valerio

    2016-01-01

    The recent finding of asbestos fibres in drinking water (up to 700.000 fibres/litres) in Tuscany (Central Italy) leads to concerns about health risks in exposed communities. Exposure to asbestos has been linked with cancer at several levels of the gastrointestinal tract, and it has been documented, in an animal model, a direct cytotoxic effect of asbestos fibres on the ileum. It has been recently described a possible link between asbestos and intrahepatic cholangiocarcinoma, and asbestos fibres have been detected in humans in histological samples from colon cancer and in gallbladder bile. Taken together, these findings suggest the possibility of an enterohepatic translocation of asbestos fibres, alternative to lymphatic translocation from lungs. In animal models, asbestos fibres ingested with drinking water act as a co-carcinogen in the presence of benzo(a) pyrene and, according to the International Agency for Research on Cancer (IARC ), there is evidence pointing to a causal effect of ingested asbestos on gastric and colorectal cancer. The risk seems to be proportional to the concentration of ingested fibres, to the extent of individual water consumption, to exposure timing, and to the possible exposure to other toxics (i.e., benzo(a)pyrene). Furthermore, the exposure to asbestos by ingestion could explain the epidemiological finding of mesothelioma in subjects certainly unexposed by inhalation. In conclusion, several findings suggest that health risks from asbestos could not exclusively derive from inhalation of fibres. Health hazards might also be present after ingestion, mainly after daily ingestion of drinking water for long periods. In Italy, a systemic assessment of the presence of asbestos fibres in drinking water is still lacking, although asbestos-coated pipelines are widely diffused and still operating. Despite the fact that the existence of a threshold level for health risks linked to the presence of asbestos in drinking water is still under debate, the

  5. Asbestos exposure among construction workers during demolition of old houses in Tehran, Iran.

    Science.gov (United States)

    Kakooei, Hossein; Normohammadi, Mohhammad

    2014-01-01

    Air quality in demolition practices has seldom been evaluated in Iran. Accordingly, we evaluated asbestos exposure among Tehran construction workers during the demolition of old houses. To identify possible sources of asbestos exposure, including thermal insulations, chimney pipes and cement sheets, were all sampled. This study also were taken the personal air samples to evaluate any asbestos exposure during the demolition. The asbestos fibers found in the samples were analyzed by phase-contrast optical microscopy (PCM), scanning electron microscopy (SEM) equipped with an energy dispersive X-ray analysis, and polarized light microscopy (PLM) methods. Personal monitoring of asbestos fiber levels indicated a range from 0.01 to 0.15 PCM f/ml (0.02-0.42 SEM f/ml). The geometric mean concentrations were 0.07 PCM f/ml (0.20 SEM f/ml), which is considerably higher than the threshold limit value (TLV) proposed by American Conference of Governmental Industrial Hygienist (ACGIH), which is 0.1 f/ml. The analysis showed a presence in the bulk samples only chrysotile asbestos and an absence of the other type asbestos. Therefore, it might be expected that workers who worked in the demolition of old houses will suffer from negative effects of exposing to the asbestos fibers.

  6. Evaluation of asbestos exposure within the automotive repair industry: a study involving removal of asbestos-containing body sealants and drive clutch replacement.

    Science.gov (United States)

    Blake, Charles L; Dotson, G Scott; Harbison, Raymond D

    2008-12-01

    Two independent assessments were performed of airborne asbestos concentrations generated during automotive repair work on vintage vehicles . The first involved removal of asbestos-containing seam sealant, and the second involved servicing of a drive clutch. Despite the relatively high concentrations (5.6-28%) of chrysotile fibers detected within bulk samples of seam sealant, the average asbestos concentration for personal breathing zone (PBZ) samples during seam sealant removal was 0.006 f/cc (fibers/cubic centimeter of air). Many other air samples contained asbestos at or below the analytical limit of detection (LOD). Pneumatic chiseling of the sealant material during removal resulted in 69% of area air samples containing asbestos. Use of this impact tool liberated more asbestos than hand scraping. Asbestos fibers were only detected in air samples collected during the installation of a replacement clutch. The highest asbestos corrected airborne fiber concentration observed during clutch installation was 0.0028 f/cc. This value is approximately 100 times lower than Occupational Safety and Health Administration's (OSHA) permissible exposure limit (PEL) of 0.1f/cc. The airborne asbestos concentrations observed during the servicing of vintage vehicles with asbestos-containing seam sealant and clutches are comparable to levels reported for repair work involving brake components and gaskets.

  7. Respiratory impairment due to asbestos exposure in brake-lining workers

    International Nuclear Information System (INIS)

    Erdinc, M.; Erdinc, E.; Cok, G.; Polatli, M.

    2003-01-01

    There is extensive evidence that exposure to asbestos causes pulmonary parenchyma fibrosis, pleural disease, and malignant neoplasm in asbestos-exposed workers. However, few data concerning brake-lining workers are available in the literature. In this study, we aimed to assess the long-term effects of chrysotile asbestos exposure on lung function and the risk of asbestos-related diseases in brake-lining workers. Seventy-four asbestos-exposed workers who processed brake-lining products and 12 unexposed office workers were offered pulmonary function tests (spirometry and transfer actor) in 1992 and 1999. In 1999, the mean duration of asbestos exposure was 0.00±4.07 and 11.02±4.81 years (7-31 years) in non smoking and smoking asbestos workers, respectively. Transfer factor (T L , CO) and transfer coefficient (K CO ) decline were significant in the 7-year follow-up in both smoking and non smoking asbestos workers. However, lung function indices of he control group, whom were all current smokers; were also found to be decreased, including FEF 75 , T L , CO and K CO . We found minimal reticular changes in 10 asbestos workers who were all current smokers, they underwent high-resolution computed tomography scans of the chest and we found that they ad peri bronchial thickening resulting from smoking. As a conclusion, even in the absence of radiographic asbestosis, T L , CO and K CO may decrease after mean 10-year duration of exposure to asbestos in brake-lining workers and this is more noticeable with cigarette burden

  8. CT characteristics of pleural plaques related to occupational or environmental asbestos exposure from South Korean asbestos mines

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yoo Kyung [Dept. of Radiology, School of Medicine, Ewha Womans University, Seoul (Korea, Republic of); Myong, Jun Pyo [Dept. of Occupational and Environmental Medicine, Seoul St. Mary' s Hospital, College of Medicine, The Catholic University of Korea, Seoul (Korea, Republic of); Lee, Jeong Kyong [Dept. of Radiology, Dongguk University Ilsan Hospital, Goyang (Korea, Republic of); Kim, Yoon Kyung [Dept. of Radiology, Gachon University Gil Medical Center, Incheon (Korea, Republic of); Jung, Soon Hee [Dept. of Pathology, Yonsei University Wonju College of Medicine, Wonju (Korea, Republic of)

    2015-10-15

    This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p < 0.001) and a lower predominance on the dorsal side (upper, 74.9% vs. lower, 91.8%, p = 0.02). Diaphragmatic involvement (78.1%) showed a right-side predominance (right, 73.8% vs. left, 55.6%, p < 0.001), whereas mediastinal plaques (42.7%) were more frequent on the left (right, 17.6% vs. left, 39.4%, p < 0.001). The extent and maximum length of plaques, and presence and severity of combined asbestosis, were significantly higher in the occupational exposure group (p < 0.05). Pleural plaques in asbestos-exposed individuals are variable in number and size; and show a predominant distribution in the upper ventral and lower dorsal chest walls, right diaphragm, and left mediastinum. Asbestos mine workers have a higher extent of plaques and pulmonary fibrosis versus environmentally exposed individuals.

  9. CT characteristics of pleural plaques related to occupational or environmental asbestos exposure from South Korean asbestos mines

    International Nuclear Information System (INIS)

    Kim, Yoo Kyung; Myong, Jun Pyo; Lee, Jeong Kyong; Kim, Yoon Kyung; Jung, Soon Hee

    2015-01-01

    This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p < 0.001) and a lower predominance on the dorsal side (upper, 74.9% vs. lower, 91.8%, p = 0.02). Diaphragmatic involvement (78.1%) showed a right-side predominance (right, 73.8% vs. left, 55.6%, p < 0.001), whereas mediastinal plaques (42.7%) were more frequent on the left (right, 17.6% vs. left, 39.4%, p < 0.001). The extent and maximum length of plaques, and presence and severity of combined asbestosis, were significantly higher in the occupational exposure group (p < 0.05). Pleural plaques in asbestos-exposed individuals are variable in number and size; and show a predominant distribution in the upper ventral and lower dorsal chest walls, right diaphragm, and left mediastinum. Asbestos mine workers have a higher extent of plaques and pulmonary fibrosis versus environmentally exposed individuals

  10. Airborne asbestos exposures associated with gasket and packing replacement: a simulation study and meta-analysis.

    Science.gov (United States)

    Madl, Amy K; Hollins, Dana M; Devlin, Kathryn D; Donovan, Ellen P; Dopart, Pamela J; Scott, Paul K; Perez, Angela L

    2014-08-01

    Exposures to airborne asbestos during the removal and installation of internal gaskets and packing associated with a valve overhaul were characterized and compared to published data according to different variables (e.g., product, equipment, task, tool, setting, duration). Personal breathing zone and area samples were collected during twelve events simulating gasket and packing replacement, clean-up and clothing handling. These samples were analyzed using PCM and TEM methods and PCM-equivalent (PCME) airborne asbestos concentrations were calculated. A meta-analysis was performed to compare these data with airborne asbestos concentrations measured in other studies involving gaskets and packing. Short-term mechanic and assistant airborne asbestos concentrations during valve work averaged 0.013f/cc and 0.008f/cc (PCME), respectively. Area samples averaged 0.008f/cc, 0.005f/cc, and 0.003f/cc (PCME) for center, bystander, and remote background, respectively. Assuming a tradesman conservatively performs 1-3 gasket and/or packing replacements daily, an average 8-h TWA was estimated to be 0.002-0.010f/cc (PCME). Combining these results in a meta-analysis of the published exposure data showed that the majority of airborne asbestos exposures during work with gaskets and packing fall within a consistent and low range. Significant differences in airborne concentrations were observed between power versus manual tools and removal versus installation tasks. Airborne asbestos concentrations resulting from gasket and packing work during a valve overhaul are consistent with historical exposure data on replacement of asbestos-containing gasket and packing materials involving multiple variables and, in nearly all plausible scenarios, result in average airborne asbestos concentrations below contemporaneous occupational exposure limits for asbestos. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Asbestos: selected cancers

    National Research Council Canada - National Science Library

    Institute of Medicine; Board on Population Health and Public Health Practice; Institute of Medicine; National Academy of Sciences

    2006-01-01

    ...: Selected Health Effects. This committee was charged with addressing whether asbestos exposure is causally related to adverse health consequences in addition to asbestosis, mesothelioma, and lung cancer. Asbestos...

  12. Personal exposures to asbestos fibers during brake maintenance of passenger vehicles.

    Science.gov (United States)

    Cely-García, María Fernanda; Sánchez, Mauricio; Breysse, Patrick N; Ramos-Bonilla, Juan P

    2012-11-01

    Brake linings and brake pads are among the asbestos-containing products that are readily available in Colombia. When sold separated from their support, brake linings require extensive manipulation involving several steps that include drilling, countersinking, riveting, bonding, cutting, beveling, and grinding. Without this manipulation, brake linings cannot be installed in a vehicle. The manipulation process may release asbestos fibers, which may expose brake mechanics to the fibers. Three brake repair shops located in Bogotá (Colombia) were sampled for 3 or 4 consecutive days using US National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. Standard procedures for quality control were followed during the sampling process, and asbestos samples were analyzed by an American Industrial Hygiene Association accredited laboratory. Personal samples were collected to assess full-shift and short-term exposures. Area samples were also collected close to the brake-lining manipulation equipment and within office facilities. Activities were documented during the sampling process. Using Phase Contrast Microscopy Equivalent counts to estimate air asbestos concentrations, all personal samples [i.e. 8-h time-weighted averages (TWAs) and 30-min personal samples] were in compliance with the US Occupational Safety and Health Administration standards. Personal asbestos concentrations based on transmission electron microscopy counts were extremely high, ranging from 0.006 to 3.493 f cm(-3) for 8-h TWA and from 0.015 to 8.835 f cm(-3) for 30-min samples. All asbestos fibers detected were chrysotile. Cleaning facilities and grinding linings resulted in the highest asbestos exposures based on transmission electron microscopy counts. There were also some samples that did not comply with the NIOSH's recommended exposure limits. The results indicate that the brake mechanics sampled are exposed to extremely high asbestos concentrations (i.e. based on transmission

  13. CT Characteristics of Pleural Plaques Related to Occupational or Environmental Asbestos Exposure from South Korean Asbestos Mines.

    Science.gov (United States)

    Kim, Yookyung; Myong, Jun-Pyo; Lee, Jeong Kyong; Kim, Jeung Sook; Kim, Yoon Kyung; Jung, Soon-Hee

    2015-01-01

    This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p occupational exposure group (p environmentally exposed individuals.

  14. Environmental health survey in asbestos cement sheets manufacturing industry.

    Science.gov (United States)

    Ansari, F A; Bihari, V; Rastogi, S K; Ashquin, M; Ahmad, I

    2007-01-01

    About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

  15. Exposure to chrysotile asbestos associated with unpacking and repacking boxes of automobile brake pads and shoes.

    Science.gov (United States)

    Madl, A K; Scott, L L; Murbach, D M; Fehling, K A; Finley, B L; Paustenbach, D J

    2008-08-01

    Industrial hygiene surveys and epidemiologic studies of auto mechanics have shown that these workers are not at an increased risk of asbestos-related disease; however, concerns continue to be raised regarding asbestos exposure from asbestos-containing brakes. Handling new asbestos-containing brake components has recently been suggested as a potential source of asbestos exposure. A simulation study involving the unpacking and repacking of 105 boxes of brakes (for vehicles ca. 1946-80), including 62 boxes of brake pads and 43 boxes of brake shoes, was conducted to examine how this activity might contribute to both short-term and 8-h time-weighted average exposures to asbestos. Breathing zone samples on the lapel of a volunteer worker (n = 80) and area samples at bystander (e.g., 1.5 m from worker) (n = 56), remote area (n = 26) and ambient (n = 10) locations collected during the unpacking and repacking of boxes of asbestos-containing brakes were analyzed by phase contrast microscopy and transmission electron microscopy. Exposure to airborne asbestos was characterized for a variety of parameters including the number of boxes handled, brake type (i.e. pads versus shoes) and the distance from the activity (i.e. worker, bystander and remote area). This study also evaluated the fiber size and morphology distribution according to the International Organization for Standardization analytical method for asbestos. It was observed that (i) airborne asbestos concentrations increased with the number of boxes unpacked and repacked, (ii) handling boxes of brake pads resulted in higher worker asbestos exposures compared to handling boxes of brake shoes, (iii) cleanup and clothes-handling tasks produced less airborne asbestos than handling boxes of brakes and (iv) fiber size and morphology analysis showed that while the majority of fibers were free (e.g. not associated with a cluster or matrix), 20 microm length) considered to pose the greatest risk of asbestos-related disease. It

  16. Temporal Patterns of Exposure to Asbestos and Risk of Asbestosis: An Analysis of a Cohort of Asbestos Textile Workers.

    Science.gov (United States)

    Farioli, Andrea; Violante, Francesco S; La Vecchia, Carlo; Negri, Eva; Pelucchi, Claudio; Spatari, Giovanna; Boffetta, Paolo; Pira, Enrico

    2018-01-12

    The aim of the study was to assess the risk of asbestosis death based on the temporal pattern of exposure to asbestos. We followed up a cohort of asbestos textile workers, employed in 1946 to 1984, until November 2013. We measured the duration of the employment, the time since last employment (TSLE), the age, and the year of first employment. Hazard ratios (HR) were estimated through multivariable Cox regression models. We observed 51 asbestosis deaths among 1823 workers. The HR of asbestosis death increased with exposure duration (HR 2.4 for ≥15 years compared with <5 years, P trend = 0.014) and declined with TSLE (HR 0.3 for ≥25 compared with <5 years, P = 0.004). The risk of asbestosis mortality strongly declined for exposure starting after 1968. The risk of asbestosis death strongly declines in the decades after cessation of the exposure.This is an open access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal. http://creativecommons.org/licenses/by-nc-nd/4.0.

  17. Asbestos case and its current implications for global health

    Directory of Open Access Journals (Sweden)

    Daniela Marsili

    2013-09-01

    Full Text Available Notwithstanding a major body of evidence on the carcinogenicity of all asbestos fibres and a general consensus of the scientific community on the health impact of this agent, asbestos is still produced and used in a large number of countries, thus determining further harm for future generations. Prevention of asbestos-related disease requires international cooperation, transfer of know-how and dissemination of successful procedures in order to contrast asbestos exposure in the frame of a global environmental health approach.

  18. Pleural mesothelioma: Case-report of uncommon occupational asbestos exposure in a small furniture industry.

    Science.gov (United States)

    Oddone, Enrico; Imbriani, Marcello

    2016-01-01

    The relationship between asbestos exposure and malignant mesothelioma is no longer disputed, although it is not always easy to trace past occupational exposure. This report describes a case of uncommon asbestos exposure of a small furniture industry worker, who subsequently died of pleural malignant mesothelioma, to stress the crucial importance of a full reconstruction of the occupational history, both for legal and compensation purposes. Sarcomatoid pleural mesothelioma was diagnosed in a 70-year-old man, who was previously employed as a carpenter in a small furniture industry. He worked for about 6 years in the small factory, was exposed to asbestos during the assembly of the furniture inspired by classical architecture, in which asbestos cement tubes were used to reproduce classical columns. During this production process no specific work safety measures were applied, nor masks or local aspirators. No extra-professional exposure to asbestos was identified. This mesothelioma case was investigated by the Public Prosecutor's assignment that commissioned expert evidence on the legal accountability for the disease. Despite its uncommon expositive circumstance, the length of latency (about 30 years), the duration of exposure, the clinical and histochemical features are all consistent with literature evidence, accounting for the occupational origin of this malignancy. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  19. Chest CT study of patients with asbestos exposure, 1

    International Nuclear Information System (INIS)

    Hatakeyama, Masayuki

    1988-01-01

    Thin-slice high-resolution computed tomographic (CT) findings of 36 patients (34 men, 2 women) with histories of long-term (11 to 43 years) occupational asbestos exposure (AS) were analyzed for pulmonary abnormalities, which were classified by the subpleural curvilinear shadow (SCLS) and/or the extent of honeycomb shadow (HS) into five types (O to IV). SCLS was detected in 22 patients (62 %), and HS in 14 patients (39 %). SCLS was distributed mainly in the lower lobe in patients with mild pulmonary fibrosis (Types I and II) and in segments where fibrosis was mild in patients with HS (Types III and IV). This may reflect the initiation of pulmonary fibrosis leading to the formation of a HS. Most (63.7 %) SCLS measured > 5 cm but < 10 cm in length and occurred < 1 cm from the inner chest wall in all cases. Radiologic-pathologic correlation of SCLS and HS in CT imagings, achieved in two post mortem specimens, seemed to indicate that SCLS was associated with the initial change of fibrosing bronchiolo-alveolitis, which is characteristic of pulmonary asbestosis. Thin-slice high-resolution CT findings of 36 patients with AS and 33 patients with idiopathic interstitial pneumonia (IIP) were compared. Though the incidence of SCLS was low (21 %) in this series of IIP, its presence suggests that SCLS is not specific to pulmonary asbestosis but occurs also in chronic interstitial pneumonia. In order to explore the mechanism of the appearance of SCLS, further analysis of CT and histopathologic findings not only of pulmonary asbestosis and IIP but also of many other pulmonary interstitial diseases is necessary. It could be considered that thin-slice high-resolution CT which first detected SCLS is very useful in the visualization of fine structures of the lungs. (author)

  20. Mineral fibres and health

    International Nuclear Information System (INIS)

    Hoskins, J.A.

    2001-01-01

    The use of inorganic fibrous materials is a comparatively new phenomenon and was uncommon before the Industrial Revolution. Humans evolved in a comparatively fibre-free environment and consequently never fully developed the defence mechanisms needed to deal with the consequences of inhaling fibres. However, the urban environment now has an airborne fibre concentration of around 1 f.l -1 , which is a tenfold increase on the natural background. Any sample of ambient air collected indoors or outdoors will probably contain some mineral fibres, but there is little evidence that these pose any risk to human health. They come from asbestos used in brakes, glass and mineral wools used as insulation and fire proofing of buildings, gypsum from plaster and a variety of types from many sources. Few of these have the potential to do any harm. Asbestos is the only fibre of note but urban levels are insignificant compared to occupational exposures. When the health of cohorts occupationally exposed to the several types of asbestos is studied the problem can be put into perspective. Studies of workers in the chrysotile industry exposed to much higher dust levels than in a factory today show no excess lung cancer or mesothelioma. By comparison those living near crocidolite mines, let alone working in them, may develop asbestos-related disease. As always, dose is the critical factor. Chrysotile is cleared from the lungs very efficiently, only the amphiboles are well retained. The only real health problem comes from the earlier use of asbestos products that may now be old, friable and damaged and made from amphibole or mixed fibre. If though, these are still in good condition, they do not pose a health problem. Asbestos-related diseases are very rare in those not occupationally exposed. Where they exist exposure has nearly always been to crocidolite. (author)

  1. Asbestos exposure during quarrying and processing of serpentinites: a case study in Valmalenco, Central Alps, Northern Italy

    Science.gov (United States)

    Cavallo, A.; Rimoldi, B.

    2012-04-01

    Serpentinites are metamorphic rocks derived from ultramafics such as peridotites (lherzolites and/or harzburgites), with a typical mineralogical assemblage of antigorite, olivine, diopside and minor magnetite, chlorite and chrysotile. If the rock mass has good geotechnical properties, these stones are quarried because of their wide variety of green shades and outstanding technical properties. Excellent stones are produced in the Malenco Valley, Central Alps (northern Italy, Sondrio): here the geological set-up is dominated by the ultramafic Malenco massif (lower crust-mantle complex), exposed at the Penninic to Austroalpine boundary zone. Different processing operations give origin to valuable products like stoves, funeral monuments, design home appliances; important building element as roof slabs, tiles for floor and wall coverings constitute the main commercial line of production. In this area, good quality long fibre chrysotile asbestos was mined since the XIX century, till the seventies. The asbestos fissures (mostly slip-fiber) are well known in Valmalenco, associated to an important ENE-WSW striking fracture and hydrothermal vein system. Some actual serpentinite quarries "cross" at times tunnels of the old asbestos mines, because the fracture and vein system "guides" the extraction. At present time, this area represents an excellent example of naturally occurring asbestos (NOA). For these reasons, workers' exposure to asbestos during quarrying and processing cannot be ruled out, and must be assessed according to national laws. From 2004 to nowadays, the INAIL Regional Management of Lombardia, with the collaboration of University of Milan-Bicocca, carried out extensive monitoring campaigns both in quarries and in processing laboratories. More than 300 massive samples (rocks and veins) and 250 airborne dust samples were collected during the surveys. One of the main problems in the study of massive serpentinites is the accurate identification of the different

  2. The philosophy and assumptions underlying exposure limits for ionising radiation, inorganic lead, asbestos and noise

    International Nuclear Information System (INIS)

    Akber, R.

    1996-01-01

    Full text: A review of the literature relating to exposure to, and exposure limits for, ionising radiation, inorganic lead, asbestos and noise was undertaken. The four hazards were chosen because they were insidious and ubiquitous, were potential hazards in both occupational and environmental settings and had early and late effects depending on dose and dose rate. For all four hazards, the effect of the hazard was enhanced by other exposures such as smoking or organic solvents. In the cases of inorganic lead and noise, there were documented health effects which affected a significant percentage of the exposed populations at or below the [effective] exposure limits. This was not the case for ionising radiation and asbestos. None of the exposure limits considered exposure to multiple mutagens/carcinogens in the calculation of risk. Ionising radiation was the only one of the hazards to have a model of all likely exposures, occupational, environmental and medical, as the basis for the exposure limits. The other three considered occupational exposure in isolation from environmental exposure. Inorganic lead and noise had economic considerations underlying the exposure limits and the exposure limits for asbestos were based on the current limit of detection. All four hazards had many variables associated with exposure, including idiosyncratic factors, that made modelling the risk very complex. The scientific idea of a time weighted average based on an eight hour day, and forty hour week on which the exposure limits for lead, asbestos and noise were based was underpinned by neither empirical evidence or scientific hypothesis. The methodology of the ACGIH in the setting of limits later brought into law, may have been unduly influenced by the industries most closely affected by those limits. Measuring exposure over part of an eight hour day and extrapolating to model exposure over the longer term is not the most effective way to model exposure. The statistical techniques used

  3. Malignant Mesothelioma of Spermatic Cord in an Elderly Man With a History of Asbestos Exposure.

    Science.gov (United States)

    D'Antonio, Antonio; Mastella, Federica; Colucci, Angelo; Silvestre, Gianmarco

    2016-01-01

    We report a case of malignant mesothelioma of the spermatic cord in 80-year-old man presented with retained testis, hydrocele, and right inguinal mass. The patient had a long history of asbestos exposure as a railway worker. The patient was submitted to inguinal radical orchiectomy. One year after surgery, the patient is alive without signs of disease. Malignant mesothelioma of spermatic cord is a very rare disease, but this diagnosis should be suspected in patient with a history of asbestos exposure. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. Lymphoproliferative disorder in pleural effusion in a subject with past asbestos exposure

    Directory of Open Access Journals (Sweden)

    Naofumi Hara

    2015-01-01

    Full Text Available Primary effusion lymphoma (PEL is a subtype of non-Hodgkin lymphoma that presents as serous effusions without detectable masses or organomegaly. Here we report a case of PEL-like lymphoma in a patient with past asbestos exposure. A 65-year-old man was referred to our hospital due to dyspnea upon exertion. He had been exposed to asbestos for three years in the construction industry. Chest X-ray and CT images demonstrated left pleural effusion. Cytological analysis of the pleural effusion revealed large atypical lymphocytes with distinct nuclear bodies and high nucleus-to-cytoplasm ratio. Immunohistochemical analyses showed that the cells were CD20+, CD3−, CD5−, and CD10−. These findings led to a diagnosis of diffuse large B-cell lymphoma. PEL or PEL-like lymphoma should be considered a potential cause of pleural effusion in subjects with past asbestos exposure.

  5. Italian pool of asbestos workers cohorts: mortality trends of asbestos-related neoplasms after long time since first exposure.

    Science.gov (United States)

    Ferrante, Daniela; Chellini, Elisabetta; Merler, Enzo; Pavone, Venere; Silvestri, Stefano; Miligi, Lucia; Gorini, Giuseppe; Bressan, Vittoria; Girardi, Paolo; Ancona, Laura; Romeo, Elisa; Luberto, Ferdinando; Sala, Orietta; Scarnato, Corrado; Menegozzo, Simona; Oddone, Enrico; Tunesi, Sara; Perticaroli, Patrizia; Pettinari, Aldo; Cuccaro, Francesco; Mattioli, Stefano; Baldassarre, Antonio; Barone-Adesi, Francesco; Cena, Tiziana; Legittimo, Patrizia; Marinaccio, Alessandro; Mirabelli, Dario; Musti, Marina; Pirastu, Roberta; Ranucci, Alessandra; Magnani, Corrado

    2017-12-01

    Asbestos is a known human carcinogen, with evidence for malignant mesothelioma (MM), cancers of lung, ovary, larynx and possibly other organs. MM rates are predicted to increase with a power of time since first exposure (TSFE), but the possible long-term attenuation of the trend is debated. The asbestos ban enforced in Italy in 1992 gives an opportunity to measure long-term cancer risk in formerly exposed workers. Pool of 43 previously studied Italian asbestos cohorts (asbestos cement, rolling stock, shipbuilding), with mortality follow-up updated to 2010. SMRs were computed for the 1970â€"2010 period, for the major causes, with consideration of duration and TSFE, using reference rates by age, sex, region and calendar period. The study included 51 801 subjects (5741 women): 55.9% alive, 42.6% died (cause known for 95%) and 1.5% lost to follow-up. Mortality was significantly increased for all deaths (SMR: men: 1.05, 95% CI 1.03 to 1.06; women: 1.17, 95% CI to 1.12 to 1.22), all malignancies combined (SMR: men: 1.17, 95% CI to 1.14 to 1.20; women: 1.33, 95% CI 1.24 to 1.43), pleural and peritoneal malignancies (SMR: men: 13.28 and 4.77, 95% CI 12.24 to 14.37 and 4.00 to 5.64; women: 28.44 and 6.75, 95% CI 23.83 to 33.69 and 4.70 to 9.39), lung (SMR: men: 1.26, 95% CI 1.21 to 1.31; women: 1.43, 95% CI 1.13 to 1.78) and ovarian cancer (SMR=1.38, 95% CI 1.00 to 1.87) and asbestosis (SMR: men: 300.7, 95% CI 270.7 to 333.2; women: 389.6, 95% CI 290.1 to 512.3). Pleural cancer rate increased during the first 40 years of TSFE and reached a plateau after. The study confirmed the increased risk for cancer of the lung, ovary, pleura and peritoneum but not of the larynx and the digestive tract. Pleural cancer mortality reached a plateau at long TSFE, coherently with recent reports. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  6. Relevancy of human exposure via house dust to the contaminants lead and asbestos

    NARCIS (Netherlands)

    Oomen AG; Lijzen JPA; SIR; LER

    2004-01-01

    The present report addresses the issues whether house dust is likely to contribute substantially to the exposure of humans, in particular for the contaminants lead and asbestos. House dust consists for 30-70% of soil material, indicating that contaminated soil can lead to contaminated house dust. It

  7. A 26-Year-Old Male with Mesothelioma Due to Asbestos Exposure

    Directory of Open Access Journals (Sweden)

    P. Zarogoulidis

    2011-01-01

    Full Text Available Mesothelioma is a malignancy with poor prognosis, with an average 5-year survival rate being less than 9%. This type of cancer is almost exclusively caused by exposure to asbestos. A long exposure can cause mesothelioma and so can short ones, as each exposure is cumulative. We report a case of a 26-year-old male who was exposed to asbestos during his primary school years from the age of 6 to 12. Although the tumor mainly affects older men who in their youth were occupationally exposed to asbestos, malignant mesothelioma can also occur in young adults. A medical history was carefully taken and asbestos exposure was immediately mentioned by the patient. We conducted biopsy on the right supraclavicular lymph node. The patient was not a candidate for surgery, and chemotherapy treatment was initiated. While patient's chemotherapy is still ongoing, no other similar cases of students or teachers have been traced up to date from his school. The school building was demolished in January 2009.

  8. Comparison of asbestos-associated respiratory disease by medical examination between shipyard retiree and workers of active service with asbestos exposure

    International Nuclear Information System (INIS)

    Ikeda, Tooru; Yoshida, Toshiaki; Fujisawa, Hiroyuki; Tanaka, Ayako; Ikeda, Hideki; Kawano, Hiroaki

    2009-01-01

    We examined 407 shipyard workers with asbestos exposure (406 men and one woman; mean age, 60.4 years) for asbestos-associated respiratory disease using the multi-slice chest CT in addition to the regular examinations. After the examination, workers with suspicion of malignancy by the multi-slice CT, other examinations including biopsy were performed to make the final diagnosis. We divided these people into two groups as follows; retiree (133 cases, 132 men and one woman; mean age, 65.9 years) and workers of shipyard active service (274 cases, all men, mean age, 57.6 years). We compared the incidence of asbestos-associated respiratory disease, age, incubation time and work period at asbestos exposure in these two groups. 97 of 133 (72.9%) retired workers and 94 of 274 (34.4%) active service had asbestos-associated respiratory disease as follows: pleural plaque without calcification, 25 cases (18.8%) (retired) and 35 (12.8%) (active service); pleural plaque with calcification, 65 (48.7%) and 51 (18.6%); diffuse pleural thickening, 0 (0%) and 0 (0%); asbestosis, 5 (3.8%) and 6 (2.2%); lung cancer, 1 case (0.8%) and 2 cases (0.7%) and malignant pleural mesothelioma 1 case (0.8%) and none (0%). The rate of workers with total asbestos-associated respiratory disease in the retired group was significantly higher than that in active service (P<0.01). Especially pleural plaque with calcification were detected more in shipyard retired workers than active service workers. The incidence of pleural plaque is related to age and incubation time but not to work period at asbestos exposure. (author)

  9. Mesothelioma incidence and community asbestos exposure; Incidence du mesotheliome et exposition environnementale a l'amiante

    Energy Technology Data Exchange (ETDEWEB)

    Berry, M.

    1998-03-01

    The objective of this study is to examine the importance of environmental exposure, non professional, to asbestos in the supervening of mesothelioma among the inhabitants of Manville( Somerset county, New Jersey, United States) where is the most important factory making products with asbestos of the North America. (N.C.)

  10. Exposure to asbestos during brake maintenance of automotive vehicles by different methods.

    Science.gov (United States)

    Kauppinen, T; Korhonen, K

    1987-05-01

    Asbestos concentrations were measured during the different operations of brake maintenance of passenger cars, trucks and buses in 24 Finnish workplaces. The estimated average asbestos exposure during the workday (8-hr time-weighted average) was 0.1-0.2 fibers/cm3 during brake repair of trucks or buses, and under 0.05 f/cm3 during repair of passenger car brakes when the background concentration was not included in the calculations. The background concentration was estimated to be less than 0.1 f/cm3. During brake maintenance of buses and trucks, heavy exposure, 0.3-125 (mean 56) f/cm3, was observed during machine grinding of new brake linings if local exhaust was not in use. Other short-term operations during which the concentration exceeded 1 f/cm3 were the cleaning of brakes with a brush, wet cloth or compressed air jet. During brake servicing of passenger cars, the concentration of asbestos exceeded 1 f/cm3 only during compressed air blowing without local exhaust. The different methods of decreasing the exposure and the risk of asbestos-related diseases among car mechanics are discussed.

  11. Resistance to asbestos-induced apoptosis with continuous exposure to crocidolite on a human T cell

    Energy Technology Data Exchange (ETDEWEB)

    Maeda, Megumi [Department of Biofunctional Chemistry, Graduate School of Natural Science and Technology, Okayama University, 1-1-1 Tsushima-Naka, Okayama 700-8530 (Japan); Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Yamamoto, Shoko [Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Chen, Ying [Division of Pneumoconiosis, School of Public Health, China Medical University, 92 North 2nd, Heping District, Shenyang 110001 (China); Kumagai-Takei, Naoko [Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Hayashi, Hiroaki [Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Department of Dermatology, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Matsuzaki, Hidenori; Lee, Suni; Hatayama, Tamayo; Miyahara, Naomi; Katoh, Minako [Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Hiratsuka, Juni-ichi [Department of Radiation Oncology, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Nishimura, Yasumitsu [Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan); Otsuki, Takemi, E-mail: takemi@med.kawasaki-m.ac.jp [Department of Hygiene, Kawasaki Medical School, 577 Matsushima, Kurashiki 701-0192 (Japan)

    2012-07-01

    We have been investigating the immunological effects of asbestos. The establishment of a low-dose and continuously exposed human T cell line, HTLV-1 immortalized MT-2, to chrysotile (CB) revealed reduction of CXCR3 chemokine receptor and production of IFN-{gamma} that caused a decline of tumor immunity. These effects were coupled with upregulation of IL-10, TGF-{beta}, and BCL-2 in asbestos-exposed patients. To observe the immunological effects of crocidolite (CR) on human T cells, a trial to establish a low-dose and continuously exposed model was conducted and compared with a previously reported CB-exposed model (MT-2CB). Transient exposure of MT-2 original cells to CB or CR induced a similar level of apoptosis and growth inhibition. The establishment of a continuously exposed subline to CR (MT-2CR) revealed resistance against CR-induced apoptosis and upregulation of the BCL-2/BAX ratio similar to that recorded for MT-2CB. Both sublines showed reduced production of IFN-{gamma}, TNF-{alpha}, and IL-6 with increased IL-10. cDNA microarray with network/pathway analyses focusing on transcription factors revealed that many similar factors related to cell proliferation were involved following continuous exposure to asbestos in both MT-2CB and MT-2CR. These results indicate that both CB and CR fibers affect human T cells with similar degrees even though the carcinogenic activity of these substances differs due to their chemical and physical forms. Trials to identify early detection markers for asbestos exposure or the occurrence of asbestos-inducing malignancies using these findings may lead to the development of clinical tools for asbestos-related diseases and chemoprevention that modifies the reduced tumor immunity. - Highlights: Black-Right-Pointing-Pointer Comparison of effects of chrysotile and crocidolite on human T cell was done. Black-Right-Pointing-Pointer Both fibers caused apoptosis of T cells by transient exposure. Black-Right-Pointing-Pointer T cells

  12. Evaluation of asbestos exposures during firewood-harvesting simulations in Libby, MT, USA--preliminary data.

    Science.gov (United States)

    Hart, Julie F; Ward, Tony J; Spear, Terry M; Crispen, Kelly; Zolnikov, Tara R

    2007-11-01

    Research was conducted in order to assess potential exposure to asbestos while harvesting firewood from amphibole-contaminated trees near Libby, MT, USA. Three firewood-harvesting simulations took place in the summer and fall of 2006 in the Kootenai Forest inside the US Environmental Protection Agency (EPA) restricted zone surrounding the former W.R. Grace vermiculite mine. Another simulation was conducted near Missoula, MT, USA, which served as the control. The work practices following each simulation were consistent throughout each trial. Personal breathing zone (PBZ) asbestos concentrations were measured by phase contrast microscopy (PCM) and transmission electron microscopy (TEM). Surface wipe samples of personal protective clothing were measured by TEM. The mean (n = 12) PBZ PCM sample time-weighted average (TWA) concentration was 0.29 fibers per milliliter, standard deviation (SD = 0.54). A substantial portion (more than five fibers per sample) of non-asbestos fibers (cellulose) was reported on all PBZ samples (excluding field blanks) when analyzed by TEM. The mean (n = 12) PBZ TEM sample TWA concentration for amphibole fibers 5-microm long was 0.07 fibers per milliliter (SD = 0.08). Substantial amphibole fiber concentrations were revealed on Tyvek clothing wipe samples. The mean concentration (n = 12) was 29 826 fibers per square centimeter (SD = 37 555), with 91% (27 192 fibers per square centimeter) comprised fibers firewood-harvesting activities in asbestos-contaminated areas and that the potential for exposure exists during such activities.

  13. Pulmonary Toxicity and Modifications in Iron Homeostasis Following Libby Amphibole Asbestos Exposure in Rat Models of Cardiovascular Disease

    Science.gov (United States)

    Rationale: Individuals suffering from cardiovascular disease (CVD) develop iron dysregulation which may influence pulmonary toxicity and injury upon exposure to asbestos. We hypothesized spontaneously hypertensive (SH) and spontaneously hypertensive heart failure (SHHF) rats woul...

  14. Asbestos as 'toxic short-circuit' optic-fibre for UV within the cell-net: — Likely roles and hazards for secret UV and IR metabolism

    International Nuclear Information System (INIS)

    Traill, Robert R

    2011-01-01

    The most toxic asbestos fibres have widths 250nm-10nm, and this toxicity is 'physical', which could mean either mechanical or optical: Tangling with chromosomes is a mechanical hazard occasionally reported, and fibres 100nm wide — or chrysotile (white asbestos) is >150nm. In both cases, UV A /UV B -transmission would then predominate. (Chrysotile 150nm might be benign — escaping both mechanical and optical!). But what would generate such UV, and why would its transmission be toxic? Thar and Kühl (J.Theor.Biol.:2004) explain that the long mitochondria on microtubules may be able to act as UV-lasers, (and many observers since Gurwitsch 1923 have reported ultraweak UV emissions escaping from all types of living bio-tissue). That all suggests some universal secret role for UV, apparently related to mitosis. Insertion of fibre 'short-circuits' could then cause upsets in mitosis-control, and hence DNA irregularities. Such UV-control could parallel similar lower-powered Infra-Red control-systems (as considered elsewhere for coaxial myelin; or as portrayed by G.Albrecht-Buehler's online animations etc.); and the traditional short mitochondria seem better suited for this IR task.

  15. Non-malignant consequences of decreasing asbestos exposure in the Brazil chrysotile mines and mills

    OpenAIRE

    Bagatin, E.; Neder, J. A. [UNIFESP; Nery, L. E. [UNIFESP; Terra, M.; Kavakama, J.; Castelo, A. [UNIFESP; Capelozzi, V; Sette, A. [UNIFESP; Kitamura, S.; Favero, M.; Moreira, D. C.; Tavares, R.; Peres, C. [UNIFESP; Becklake, M. R.

    2005-01-01

    Aims: To investigate the consequences of improvement in the workplace environment over six decades (1940-96) in asbestos miners and millers from a developing country ( Brazil).Methods: A total of 3634 Brazilian workers with at least one year of exposure completed a respiratory symptoms questionnaire, chest radiography, and a spirometric evaluation. the study population was separated into three groups whose working conditions improved over time: group I (1940-66, n = 180), group II (1967-76, n...

  16. The epidemiology of malignant mesothelioma in women: gender differences and modalities of asbestos exposure.

    Science.gov (United States)

    Marinaccio, Alessandro; Corfiati, Marisa; Binazzi, Alessandra; Di Marzio, Davide; Scarselli, Alberto; Ferrante, Pierpaolo; Bonafede, Michela; Verardo, Marina; Mirabelli, Dario; Gennaro, Valerio; Mensi, Carolina; Schallemberg, Gert; Mazzoleni, Guido; Merler, Enzo; Girardi, Paolo; Negro, Corrado; D'Agostin, Flavia; Romanelli, Antonio; Chellini, Elisabetta; Silvestri, Stefano; Pascucci, Cristiana; Calisti, Roberto; Stracci, Fabrizio; Romeo, Elisa; Ascoli, Valeria; Trafficante, Luana; Carrozza, Francesco; Angelillo, Italo Francesco; Cavone, Domenica; Cauzillo, Gabriella; Tallarigo, Federico; Tumino, Rosario; Melis, Massimo; Iavicoli, Sergio

    2018-04-01

    The epidemiology of gender differences for mesothelioma incidence has been rarely discussed in national case lists. In Italy an epidemiological surveillance system (ReNaM) is working by the means of a national register. Incident malignant mesothelioma (MM) cases in the period 1993 to 2012 were retrieved from ReNaM. Gender ratio by age class, period of diagnosis, diagnostic certainty, morphology and modalities of asbestos exposure has been analysed using exact tests for proportion. Economic activity sectors, jobs and territorial distribution of mesothelioma cases in women have been described and discussed. To perform international comparative analyses, the gender ratio of mesothelioma deaths was calculated by country from the WHO database and the correlation with the mortality rates estimated. In the period of study a case list of 21 463 MMs has been registered and the modalities of asbestos exposure have been investigated for 16 458 (76.7%) of them. The gender ratio (F/M) was 0.38 and 0.70 (0.14 and 0.30 for occupationally exposed subjects only) for pleural and peritoneal cases respectively. Occupational exposures for female MM cases occurred in the chemical and plastic industry, and mainly in the non-asbestos textile sector. Gender ratio proved to be inversely correlated with mortality rate among countries. The consistent proportion of mesothelioma cases in women in Italy is mainly due to the relevant role of non-occupational asbestos exposures and the historical presence of the female workforce in several industrial settings. Enhancing the awareness of mesothelioma aetiology in women could support the effectiveness of welfare system and prevention policies. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  17. [Malignant mesothelioma in Emilia-Romagna: incidence and asbestos exposure].

    Science.gov (United States)

    Mangone, Lucia; Romanelli, Antonio; Campari, Cinzia; Candela, Silvia

    2002-01-01

    This paper describes the activity, the sources of informations, methods and results of the "Emilia-Romagna Mesothelioma Registry" (ReM). The Registry started in 1996 and collects all cases of Malignant Mesothelioma (MM) occurring in Emilia-Romagna. 323 new cases (225 males and 98 females) have been detected during the period 1996-2001. Most cases (n = 286) concerned pleura. Other observed localizations were: peritoneum (n = 30), tunica vaginalis testis (n = 4) and pericardium (n = 3). Most of the cases were reported by the Institutes of Pathology and Occupational Health and by the Safety Services (respectively the 62% and the 18%). 87% of all the cases were histologically, 8% TC, 4% radiologically and only 1% clinically confirmed. The regional incidence rate (for 10(5) person-years, age standardized on the 1991 Italian population), has been estimated to be 1.98 in males and 0.88 in females. The highest rates were registered in Piacenza and Reggio Emilia province among men and Reggio Emilia and Ravenna province among women. 72% of cases have been classified as exposed to asbestos (64% occupationally and 8% as domestic/environmentally exposed).

  18. Evaluation of public and worker exposure due to naturally occurring asbestos in gravel discovered during a road construction project.

    Science.gov (United States)

    Perkins, Robert A; Hargesheimer, John; Vaara, Leah

    2008-09-01

    During a repair and reconstruction project of an unpaved highway in a remote region of Alaska, workers discovered, after construction had commenced, that the materials used from a local material site contained asbestos (variously described as tremolite or actinolite). The regional geology indicated the presence of ultramafic rock, which often contains asbestos. Evaluation of asbestos exposure to workers, their equipment, and living quarters was required, as was the possible future exposure of workers and the general public to asbestos already used in the roadway construction. In addition, a decision was needed on whether to use materials from the contaminated site in the future. Of the almost 700 breathing zone air monitoring samples taken of the workers, 3% of the samples indicated exposures at or near 0.1 f/cc by the National Institute for Occupational Safety and Health (NIOSH) 7400 phase contrast microscopy (PCM) procedure. Thirty-six of the PCM samples underwent transmission electron microscopy (TEM) analysis by the NIOSH 7402 procedure, which indicated that about 40% of the fibers were asbestos. After classifying samples by tasks performed by workers, analysis indicated that workers, such as road grader operators who ground or spread materials, had the highest exposures. Also, monitoring results indicated motorist exposure to be much less than 0.1 f/cc. The design phase of any proposed construction project in regions that contain ultramafic rock must consider the possibility of amphibole contamination of roadway materials, and budget for exploration and asbestos analysis of likely materials sites.

  19. Bronchoalveolar lavage analysis, gallium-67 lung scanning and soluble interleukin-2 receptor levels in asbestos exposure

    International Nuclear Information System (INIS)

    Delclos, G.L.; Flitcraft, D.G.; Brousseau, K.P.; Windsor, N.T.; Nelson, D.L.; Wilson, R.K.; Lawrence, E.C.

    1989-01-01

    This study examined different markers of lung immunologic and inflammatory responses to previous asbestos exposure. We performed bronchoalveolar lavage (BAL) and gallium-67 ( 67 Ga) lung scans and measured serum and BAL soluble interleukin-2 receptor (IL-2R) and angiotensin-converting enzyme (SACE) levels in 32 subjects with a history of significant asbestos exposure, 14 without (EXP) and 18 with (ASB) radiographic evidence of asbestosis. BAL analysis revealed increases in neutrophils in both ASB and EXP when compared to controls (P less than 0.01), which persisted after adjustment for smoking category. Although significant abnormalities of macrophage and total lymphocyte profiles were not found in the study population, lymphocyte subpopulation analysis revealed elevation of BAL T4/T8 ratios in the entire study group (ASB + EXP) when compared to controls (P less than 0.05), independent of smoking category. 67 Ga lung scan activity was increased in 56% of ASB and in 36% of EXP: no correlations between positive scans and different radiological and functional parameters could be found. There was no significant elevation of mean SACE, serum, or BAL IL-2R levels in any of the study categories. These data suggest that asbestos exposure may be associated with parenchymal inflammation, even in the absence of clinical criteria for asbestosis. Abnormalities of gallium uptake and of BAL analysis reflect the clinically inapparent inflammation. The increased BAL T4/T8 ratios observed suggest that abnormal local pulmonary immunoregulation may play a role in the pathogenesis of asbestos-related lung diseases

  20. The economic burden of lung cancer and mesothelioma due to occupational and para-occupational asbestos exposure.

    Science.gov (United States)

    Tompa, Emile; Kalcevich, Christina; McLeod, Chris; Lebeau, Martin; Song, Chaojie; McLeod, Kim; Kim, Joanne; Demers, Paul A

    2017-11-01

    To estimate the economic burden of lung cancer and mesothelioma due to occupational and para-occupational asbestos exposure in Canada. We estimate the lifetime cost of newly diagnosed lung cancer and mesothelioma cases associated with occupational and para-occupational asbestos exposure for calendar year 2011 based on the societal perspective. The key cost components considered are healthcare costs, productivity and output costs, and quality of life costs. There were 427 cases of newly diagnosed mesothelioma cases and 1904 lung cancer cases attributable to asbestos exposure in 2011 for a total of 2331 cases. Our estimate of the economic burden is $C831 million in direct and indirect costs for newly identified cases of mesothelioma and lung cancer and $C1.5 billion in quality of life costs based on a value of $C100 000 per quality-adjusted life year. This amounts to $C356 429 and $C652 369 per case, respectively. The economic burden of lung cancer and mesothelioma associated with occupational and para-occupational asbestos exposure is substantial. The estimate identified is for 2331 newly diagnosed, occupational and para-occupational exposure cases in 2011, so it is only a portion of the burden of existing cases in that year. Our findings provide important information for policy decision makers for priority setting, in particular the merits of banning the mining of asbestos and use of products containing asbestos in countries where they are still allowed and also the merits of asbestos removal in older buildings with asbestos insulation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  1. Linking Expert Judgement and Trends in Occupational Exposure into a Job-Exposure Matrix for Historical Exposure to Asbestos in The Netherlands

    NARCIS (Netherlands)

    Swuste, P.; Dahhan, M.; Burdorf, A.

    2008-01-01

    The aim of this article was to describe the structure and content of a job-exposure matrix (JEM) for historical asbestos exposure in The Netherlands. The JEM contained 309 occupational job title groups in 70 branches of industry during 10 periods of 5 years during 1945– 1994, resulting in 3090

  2. Linking expert judgement and trends in occupational exposure into a job-exposure matrix for historical exposure to asbestos in The Netherlands

    NARCIS (Netherlands)

    P. Swuste (Paul); M. Dahhan; A. Burdorf (Alex)

    2008-01-01

    textabstractThe aim of this article was to describe the structure and content of a job-exposure matrix (JEM) for historical asbestos exposure in The Netherlands. The JEM contained 309 occupational job title groups in 70 branches of industry during 10 periods of 5 years during 1945-1994, resulting in

  3. Cohort study of occupational asbestos-exposure related neoplasms in Texas Gulf Coast area

    International Nuclear Information System (INIS)

    Zadeii, G.R.M.

    1987-01-01

    A cohort study was conducted in Texas and Louisiana Gulf Coast area on individual workers who have been exposed to asbestos for 15 years or more. Most of these workers were employed in petrochemical industries. Of the 15,742 subjects initially selected for the cohort study, 3258 had positive chest x-ray findings believed to be related to prolonged asbestos exposure. These subjects were further investigated. Their work out included detailed medical and occupational history, laboratory tests and spirometry. One thousand eight-hundred and three cases with positive chest x-ray findings whose data files were considered complete at the end of May 1986 were analyzed and their findings included in this report. The prevalence of lung cancer and cancer of the following sights: skin, stomach, oropharyngeal, pancreas and kidneys were significantly increased when compared to data from Connecticut Tumor Registry. The prevalence of other chronic conditions such as hypertension, emphysema, heart disease and peptic ulcer was also significantly high when compared to data for the US and general population furnished by the National Center for Health Statistics. In most instances the occurrence of cancer and the chronic ailment previously mentioned appeared to follow 15-25 years of exposure to asbestos

  4. [Opinions and expectations of patients with health problems associated to asbestos exposure].

    Science.gov (United States)

    Prieto, M A; Suess, A; March, J C; Danet, A; Corral, O Pérez; Martín, A

    2011-01-01

    The prevalence of diseases related to asbestos exposure requires the development of monitoring programs and specific health care protocols. The aim of this study is to determine the opinions and expectations of former workers of an asbestos factory, in order to adapt the care process to the needs of the affected population, and to learn about the activity of the association that represents them. Qualitative study. Focus groups with former employees of a corrugated asbestos factory, members of the association AVIDA (Seville). Recording and transcription of interviews. Discourse analysis with Nudist Vivo 1.0. All respondents have health problems, including asbestosis, lung cancer and mesothelioma. Through the association, they are involved in an ongoing process of negotiation with the public administration, to improve healthcare, achieve recognition as having an occupational disease and the payment of compensation. The lack of monitoring and continuity in care is designated as the major problem in the current care process. They welcome the creation of special care units, the good treatment received and the quality of technical instruments in the public health system. On the contrary, they criticize the difficulties in finding an accurate diagnosis, the lack of continuity of care, and the bureaucratic difficulties and lack of specific care directed to affected relatives. The participants' expectations highlight their intention to participate in the development of future programs and protocols. This study confirms the multifactor nature of diseases related to asbestos exposure and the importance of determining the needs and demands of the affected population in order to improve health care.

  5. Cumulative Retrospective Exposure Assessment (REA) as a predictor of amphibole asbestos lung burden: validation procedures and results for industrial hygiene and pathology estimates.

    Science.gov (United States)

    Rasmuson, James O; Roggli, Victor L; Boelter, Fred W; Rasmuson, Eric J; Redinger, Charles F

    2014-01-01

    A detailed evaluation of the correlation and linearity of industrial hygiene retrospective exposure assessment (REA) for cumulative asbestos exposure with asbestos lung burden analysis (LBA) has not been previously performed, but both methods are utilized for case-control and cohort studies and other applications such as setting occupational exposure limits. (a) To correlate REA with asbestos LBA for a large number of cases from varied industries and exposure scenarios; (b) to evaluate the linearity, precision, and applicability of both industrial hygiene exposure reconstruction and LBA; and (c) to demonstrate validation methods for REA. A panel of four experienced industrial hygiene raters independently estimated the cumulative asbestos exposure for 363 cases with limited exposure details in which asbestos LBA had been independently determined. LBA for asbestos bodies was performed by a pathologist by both light microscopy and scanning electron microscopy (SEM) and free asbestos fibers by SEM. Precision, reliability, correlation and linearity were evaluated via intraclass correlation, regression analysis and analysis of covariance. Plaintiff's answers to interrogatories, work history sheets, work summaries or plaintiff's discovery depositions that were obtained in court cases involving asbestos were utilized by the pathologist to provide a summarized brief asbestos exposure and work history for each of the 363 cases. Linear relationships between REA and LBA were found when adjustment was made for asbestos fiber-type exposure differences. Significant correlation between REA and LBA was found with amphibole asbestos lung burden and mixed fiber-types, but not with chrysotile. The intraclass correlation coefficients (ICC) for the precision of the industrial hygiene rater cumulative asbestos exposure estimates and the precision of repeated laboratory analysis were found to be in the excellent range. The ICC estimates were performed independent of specific asbestos

  6. Pleural malignant mesothelioma and non occupational exposure to asbestos in Casale Monferrato, Italy; Mesotheliome pleural malin et exposition environnementale l'amiante a Casale Monferrato, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Magnani, C.; Terracini, B.; Ivaldi, C.; Botta, M.; Mancini, A.; Andrion, A.

    1998-03-01

    The objective is to study the possibility of the risk of a pleural malignant mesothelioma associated to an environmental exposure to asbestos coming from industry, by estimating the incidence of mesotheliomas in a population without professional exposure but living near a asbestos-cement factory.

  7. ASBESTOS EXPOSURES DURING ROUTINE FLOOR TILE MAINTENANCE. PART 1: SPRAY-BUFFING AND WET-STRIPPING

    Science.gov (United States)

    This study was conducted to ealuate airborne asbestos concentrations during spray-uffing and wet-stripping of asbestos-containing residient floor tile under three levels of floor conditions (poor, medium, and good). Airborne asbestos concentrations were measured by transmission e...

  8. Coalescent pleural malignant mesothelioma and adenocarcinoma of the lung, involving only minor asbestos exposure.

    Science.gov (United States)

    Tsuzuki, Toyonori; Ninomiya, Hironori; Natori, Yuji; Ishikawa, Yuichi

    2008-07-01

    Coexistence of pulmonary adenocarcinoma and pleural malignant mesothelioma is extremely rare, although both are asbestos-related. Herein is presented a rare case of coalescent lung tumor made up of a malignant mesothelioma and a pulmonary adenocarcinoma in a 62-year-old Japanese man, a high-school teacher with only minor asbestos exposure. Preoperative diagnosis of adenocarcinoma was made on transbronchial biopsy. At surgery, multiple small white nodules were observed on the parietal pleural surface, opposite to the lung tumor. They were confirmed to be malignant mesothelioma on histopathology of paraffin section. The pulmonary tumor mass itself consisted of two distinct portions. The major part contained papillary proliferation of hobnail and columnar cells. Peripherally, neoplastic cells grew in a lepidic fashion and micropapillary growth was also detected. The other component featured tubular structures. The former was positive for adenocarcinoma markers such as CEA, Ber-EP4, PE-10, thyroid transcription factor-1 and Napsin A, and negative for mesothelial markers including calretinin, D2-40, WT-1 and HBME, while the latter was the opposite, resulting in a diagnosis of coalescing malignant mesothelioma and adenocarcinoma. The panel of antibodies used for immunohistochemistry was useful to distinguish the two different components in the one tumor.

  9. Impact of an asbestos cement factory on mesothelioma incidence: global assessment of effects of occupational, familial, and environmental exposure.

    Science.gov (United States)

    Mensi, Carolina; Riboldi, Luciano; De Matteis, Sara; Bertazzi, Pier Alberto; Consonni, Dario

    2015-01-01

    Few studies have examined the incidence of malignant mesothelioma (MM) associated with distinct sources of asbestos exposure (occupational, familial, or environmental). We assessed the impact of asbestos exposure-global and by source-on the incidence of MM in Broni, an Italian town in which an asbestos cement factory once operated (1932-1993). Based on data collected by the Lombardy Mesothelioma Registry, we calculated the number of observed and expected MM cases among workers, their cohabitants, and people living in the area in 2000-2011. We identified 147 MM cases (17.45 expected), 138 pleural and nine peritoneal, attributable to exposure to asbestos from the factory. Thirty-eight cases had past occupational exposure at the factory (2.33 expected), numbering 32 men (26 pleural, six peritoneal) and six women (four pleural, two peritoneal). In the families of the workers, there were 37 MM cases (4.23 expected), numbering five men (all pleural) and 32 women (31 pleural, one peritoneal). Among residents in Broni or in the adjacent/surrounding towns, there were 72 cases of pleural MM (10.89 expected), numbering 23 men and 49 women. The largest MM excess was found in the towns of Broni (48 observed, 3.68 expected) and Stradella (16 observed, 1.85 expected). This study documents the large impact of the asbestos cement factory, with about 130 excess MM cases in a 12-year period. The largest MM burden was among women, from non-occupational exposure. Almost half of the MM cases were attributable to environmental exposure. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Australia’s Ongoing Legacy of Asbestos: Significant Challenges Remain Even after the Complete Banning of Asbestos Almost Fifteen Years Ago

    Science.gov (United States)

    Soeberg, Matthew; Vallance, Deborah A.; Keena, Victoria

    2018-01-01

    The most effective way of reducing the global burden of asbestos-related diseases is through the implementation of asbestos bans and minimising occupational and non-occupational exposure to respirable asbestos fibres. Australia’s asbestos consumption peaked in the 1970s with Australia widely thought to have had among the highest per-capita asbestos consumption level of any country. Australia’s discontinuation of all forms of asbestos and asbestos-containing products and materials did not occur at a single point of time. Crocidolite consumption ceased in the late 1960s, followed by amosite consumption stopping in the mid 1980s. Despite significant government reports being published in 1990 and 1999, it was not until the end of 2003 that a complete ban on all forms of asbestos (crocidolite, amosite, and chrysotile) was introduced in Australia. The sustained efforts of trade unions and non-governmental organisations were essential in forcing the Australian government to finally implement the 2003 asbestos ban. Trade unions and non-government organisations continue to play a key role today in monitoring the government’s response to Australian asbestos-related disease epidemic. There are significant challenges that remain in Australia, despite a complete asbestos ban being implemented almost fifteen years ago. The Australian epidemic of asbestos-related disease has only now reached its peak. A total of 16,679 people were newly diagnosed with malignant mesothelioma between 1982 and 2016, with 84% of cases occurring in men. There has been a stabilisation of the age-standardised malignant mesothelioma incidence rate in the last 10 years. In 2016, the incidence rate per 100,000 was 2.5 using the Australian standard population and 1.3 using the Segi world standard population. Despite Australia’s complete asbestos ban being in place since 2003, public health efforts must continue to focus on preventing the devastating effects of avoidable asbestos-related diseases

  11. Pleural mesothelioma and lung cancer risks in relation to occupational history and asbestos lung burden

    Science.gov (United States)

    Gilham, Clare; Rake, Christine; Burdett, Garry; Nicholson, Andrew G; Davison, Leslie; Franchini, Angelo; Carpenter, James; Hodgson, John; Darnton, Andrew; Peto, Julian

    2016-01-01

    Background We have conducted a population-based study of pleural mesothelioma patients with occupational histories and measured asbestos lung burdens in occupationally exposed workers and in the general population. The relationship between lung burden and risk, particularly at environmental exposure levels, will enable future mesothelioma rates in people born after 1965 who never installed asbestos to be predicted from their asbestos lung burdens. Methods Following personal interview asbestos fibres longer than 5 µm were counted by transmission electron microscopy in lung samples obtained from 133 patients with mesothelioma and 262 patients with lung cancer. ORs for mesothelioma were converted to lifetime risks. Results Lifetime mesothelioma risk is approximately 0.02% per 1000 amphibole fibres per gram of dry lung tissue over a more than 100-fold range, from 1 to 4 in the most heavily exposed building workers to less than 1 in 500 in most of the population. The asbestos fibres counted were amosite (75%), crocidolite (18%), other amphiboles (5%) and chrysotile (2%). Conclusions The approximate linearity of the dose–response together with lung burden measurements in younger people will provide reasonably reliable predictions of future mesothelioma rates in those born since 1965 whose risks cannot yet be seen in national rates. Burdens in those born more recently will indicate the continuing occupational and environmental hazards under current asbestos control regulations. Our results confirm the major contribution of amosite to UK mesothelioma incidence and the substantial contribution of non-occupational exposure, particularly in women. PMID:26715106

  12. Influence of exposure assessment and parameterization on exposure response. Aspects of epidemiologic cohort analysis using the Libby Amphibole asbestos worker cohort.

    Science.gov (United States)

    Bateson, Thomas F; Kopylev, Leonid

    2015-01-01

    Recent meta-analyses of occupational epidemiology studies identified two important exposure data quality factors in predicting summary effect measures for asbestos-associated lung cancer mortality risk: sufficiency of job history data and percent coverage of work history by measured exposures. The objective was to evaluate different exposure parameterizations suggested in the asbestos literature using the Libby, MT asbestos worker cohort and to evaluate influences of exposure measurement error caused by historically estimated exposure data on lung cancer risks. Focusing on workers hired after 1959, when job histories were well-known and occupational exposures were predominantly based on measured exposures (85% coverage), we found that cumulative exposure alone, and with allowance of exponential decay, fit lung cancer mortality data similarly. Residence-time-weighted metrics did not fit well. Compared with previous analyses based on the whole cohort of Libby workers hired after 1935, when job histories were less well-known and exposures less frequently measured (47% coverage), our analyses based on higher quality exposure data yielded an effect size as much as 3.6 times higher. Future occupational cohort studies should continue to refine retrospective exposure assessment methods, consider multiple exposure metrics, and explore new methods of maintaining statistical power while minimizing exposure measurement error.

  13. After Helsinki: a multidisciplinary review of the relationship between asbestos exposure and lung cancer, with emphasis on studies published during 1997-2004.

    Science.gov (United States)

    Henderson, Douglas W; Rödelsperger, Klaus; Woitowitz, Hans-Joachim; Leigh, James

    2004-12-01

    Despite an extensive literature, the relationship between asbestos exposure and lung cancer remains the subject of controversy, related to the fact that most asbestos-associated lung cancers occur in those who are also cigarette smokers: because smoking represents the strongest identifiable lung cancer risk factor among many others, and lung cancer is not uncommon across industrialised societies, analysis of the combined (synergistic) effects of smoking and asbestos on lung cancer risk is a more complex exercise than the relationship between asbestos inhalation and mesothelioma. As a follow-on from previous reviews of prevailing evidence, this review critically evaluates more recent studies on this relationship--concentrating on those published between 1997 and 2004--including lung cancer to mesothelioma ratios, the interactive effects of cigarette smoke and asbestos in combination, and the cumulative exposure model for lung cancer induction as set forth in The Helsinki Criteria and The AWARD Criteria (as opposed to the asbestosis-->cancer model), together with discussion of differential genetic susceptibility/resistance factors for lung carcinogenesis by both cigarette smoke and asbestos. The authors conclude that: (i) the prevailing evidence strongly supports the cumulative exposure model; (ii) the criteria for probabilistic attribution of lung cancer to mixed asbestos exposures as a consequence of the production and end-use of asbestos-containing products such as insulation and asbestos-cement building materials--as embodied in The Helsinki and AWARD Criteria--conform to, and are further consolidated by, the new evidence discussed in this review; (iii) different attribution criteria (e.g., greater cumulative exposures) are appropriate for chrysotile mining/milling and perhaps for other chrysotile-only exposures, such as friction products manufacture, than for amphibole-only exposures or mixed asbestos exposures; and (iv) emerging evidence on genetic

  14. Occupational asbestos exposure: how to deal with suspected mesothelioma cases--the Dutch approach

    NARCIS (Netherlands)

    Baas, P.; van 't Hullenaar, N.; Wagenaar, J.; Kaajan, J. P. G.; Koolen, M.; Schrijver, M.; Schlösser, N.; Burgers, J. A.

    2006-01-01

    Patients with asbestos-related diseases, such as malignant mesothelioma (MM), are not uniformly treated in Europe when they apply for compensation. In The Netherlands, the Institute of Asbestos Victims (IAV) acts on behalf of patients with a malignant mesothelioma. In the majority of cases, the

  15. Synchrotron soft X-ray imaging and fluorescence microscopy reveal novel features of asbestos body morphology and composition in human lung tissues

    Directory of Open Access Journals (Sweden)

    Polentarutti Maurizio

    2011-02-01

    Full Text Available Abstract Background Occupational or environmental exposure to asbestos fibres is associated with pleural and parenchymal lung diseases. A histopathologic hallmark of exposure to asbestos is the presence in lung parenchyma of the so-called asbestos bodies. They are the final product of biomineralization processes resulting in deposition of endogenous iron and organic matter (mainly proteins around the inhaled asbestos fibres. For shedding light on the formation mechanisms of asbestos bodies it is of fundamental importance to characterize at the same length scales not only their structural morphology and chemical composition but also to correlate them to the possible alterations in the local composition of the surrounding tissues. Here we report the first correlative morphological and chemical characterization of untreated paraffinated histological lung tissue samples with asbestos bodies by means of soft X-ray imaging and X-Ray Fluorescence (XRF microscopy, which reveals new features in the elemental lateral distribution. Results The X-ray absorption and phase contrast images and the simultaneously monitored XRF maps of tissue samples have revealed the location, distribution and elemental composition of asbestos bodies and associated nanometric structures. The observed specific morphology and differences in the local Si, Fe, O and Mg content provide distinct fingerprints characteristic for the core asbestos fibre and the ferruginous body. The highest Si content is found in the asbestos fibre, while the shell and ferruginous bodies are characterized by strongly increased content of Mg, Fe and O compared to the adjacent tissue. The XRF and SEM-EDX analyses of the extracted asbestos bodies confirmed an enhanced Mg deposition in the organic asbestos coating. Conclusions The present report demonstrates the potential of the advanced synchrotron-based X-ray imaging and microspectroscopy techniques for studying the response of the lung tissue to the

  16. Acute phase response, inflammation and metabolic syndrome biomarkers of Libby asbestos exposure

    Energy Technology Data Exchange (ETDEWEB)

    Shannahan, Jonathan H. [Curriculum in Toxicology, University of North Carolina at Chapel Hill School of Medicine, Chapel Hill, NC 27599 (United States); Alzate, Oscar [Systems Proteomics Center, University of North Carolina at Chapel Hill School of Medicine, Chapel Hill, NC 27599 (United States); Winnik, Witold M.; Andrews, Debora [Proteomics Core, Research Core Unit, National Health and Environmental Effects Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC 27711 (United States); Schladweiler, Mette C. [Cardiopulmonary and Immunotoxicology Branch, Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC 27711 (United States); Ghio, Andrew J. [Clinical Research Branch, Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, Chapel Hill, NC 27599 (United States); Gavett, Stephen H. [Cardiopulmonary and Immunotoxicology Branch, Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC 27711 (United States); Kodavanti, Urmila P., E-mail: Kodavanti.Urmila@epa.gov [Cardiopulmonary and Immunotoxicology Branch, Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC 27711 (United States)

    2012-04-15

    Identification of biomarkers assists in the diagnosis of disease and the assessment of health risks from environmental exposures. We hypothesized that rats exposed to Libby amphibole (LA) would present with a unique serum proteomic profile which could help elucidate epidemiologically-relevant biomarkers. In four experiments spanning varied protocols and temporality, healthy (Wistar Kyoto, WKY; and F344) and cardiovascular compromised (CVD) rat models (spontaneously hypertensive, SH; and SH heart failure, SHHF) were intratracheally instilled with saline (control) or LA. Serum biomarkers of cancer, inflammation, metabolic syndrome (MetS), and the acute phase response (APR) were analyzed. All rat strains exhibited acute increases in α-2-macroglobulin, and α1-acid glycoprotein. Among markers of inflammation, lipocalin-2 was induced in WKY, SH and SHHF and osteopontin only in WKY after LA exposure. While rat strain- and age-related changes were apparent in MetS biomarkers, no LA effects were evident. The cancer marker mesothelin was increased only slightly at 1 month in WKY in one of the studies. Quantitative Intact Proteomic profiling of WKY serum at 1 day or 4 weeks after 4 weekly LA instillations indicated no oxidative protein modifications, however APR proteins were significantly increased. Those included serine protease inhibitor, apolipoprotein E, α-2-HS-glycoprotein, t-kininogen 1 and 2, ceruloplasmin, vitamin D binding protein, serum amyloid P, and more 1 day after last LA exposure. All changes were reversible after a short recovery regardless of the acute or long-term exposures. Thus, LA exposure induces an APR and systemic inflammatory biomarkers that could have implications in systemic and pulmonary disease in individuals exposed to LA. -- Highlights: ► Biomarkers of asbestos exposure are required for disease diagnosis. ► Libby amphibole exposure is associated with increased human mortality. ► Libby amphibole increases circulating proteins involved

  17. Asbestos Exposure and Survival in Malignant Mesothelioma: A Description of 122 Consecutive Cases at an Occupational Clinic

    Directory of Open Access Journals (Sweden)

    E Skammeritz

    2011-09-01

    Full Text Available Background: The natural history and etiology of malignant mesothelioma (MM is already thoroughly described in the literature, but there is still debate on prognostic factors, and details of asbestos exposure and possible context with clinical and demographic data, have not been investigated comprehensively. Objectives: Description of patients with MM, focusing on exposure, occupation, survival and prognostic factors. Methods: Review of medical records of patients with MM from 1984 to 2010 from a Danish Occupational clinic. Survival was estimated using Kaplan-Meier survival analysis and prognostic factors were identified by Cox regression analysis. Results: 110 (90.2% patients were male, and 12 (9.8% were female. The median (interquartile rang [IQR] age was 65 (13 years. Pleural MM was seen in 101 (82.8% patients, and peritoneal in 11 (9.0%; two (1.6% had MM to tunica vaginalis testis, and eight (6.6% to multiple serosal surfaces. We found 68 (55.7% epithelial tumors, 26 (21.3% biphasic, and 6 (4.9% sarcomatoid. 12 (9.8% patients received tri-modal therapy, 66 (54.1% received one-/two-modality treatment, and 36 (29.5% received palliative care. Asbestos exposure was confirmed in 107 (91.0% patients, probable in four (3.3%, and unidentifiable in 11 (9.0%. The median (IQR latency was 42 (12.5 years. Exposure predominantly occurred in shipyards. The median overall survival was 1.05 (95% CI: 0.96–1.39 years; 5-year survival was 5.0% (95% CI: 2.0%–13.0%. Female sex, good WHO performance status (PS, epithelial histology and tri-modal treatment were associated with a favorable prognosis. Conclusion: MM continuously presents a difficult task diagnostically and therapeutically, and challenges occupational physicians with regard to identification and characterization of asbestos exposure.

  18. The biological effect of asbestos exposure is dependent on changes in iron homeostasis

    Science.gov (United States)

    Abstract Functional groups on the surface of fibrous silicates can complex iron. We tested the postulate that 1) asbestos complexes and sequesters host cell iron resulting in a disruption of metal homeostasis and 2) this loss of essential metal results in an oxidative stress and...

  19. One-year follow-up of the phagocytic activity of leukocytes after exposure of rats to asbestos and basalt fibers.

    Science.gov (United States)

    Hurbánková, M

    1994-01-01

    The phagocytic activity of leukocytes in peripheral blood was investigated after 2, 24, and 48 hr; 1, 2, 4, and 8 weeks; and 6 and 12 months following intraperitoneal administration of asbestos and basalt fibers to Wistar rats. Asbestos and basalt fibers differed in their effects on the parameters studied. Both granulocyte count and phagocytic activity of leukocytes during the 1-year dynamic follow-up in both dust-exposed groups of animals changed in two phases, characterized by the initial stimulation of the acute phase I, followed by the suppression of the parameters in the chronic phase II. Exposure to asbestos and basalt fibers led, in phase II, to impairment of the phagocytic activity of granulocytes. Asbestos fibers also significantly decreased phagocytic activity of monocytes. Exposure to basalt fibers did not affect the phagocytic activity of monocytes in phase II. Results suggest that the monocytic component of leukocytes plays an important role in the development of diseases caused by exposure to fibrous dusts, but basalt fibers have lesser biological effects than asbestos fibers. PMID:7882931

  20. Canine pleural mesothelioma as an indicator of environmental exposure to asbestos; Il mesotelioma pleurico del cane come indicatore di esposizione ambientale ad amianto

    Energy Technology Data Exchange (ETDEWEB)

    De Nardo, P. [Istituto Superiore di Sanita`, Rome (Italy). Lab. di Medicina Veterinaria

    1996-12-01

    Canine pleural mesothelioma represents a `sentinel health event` because of the role of asbestos exposure in its etiology and pathogenesis. The observation of such event may thus trigger prevention-oriented remedial actions. This is especially due to the relatively short induction-latency time of canine mesothelioma, i.e. eight-nine years, versus the corresponding induction-latency time in humans (on average about thirty years). The observation of cases of canine mesothelioma may concur to the detection of previously unrecognized hazardous exposures to asbestos. On this ground, the epidemiologic surveillance of canine mesothelioma in Italy is suggested.

  1. [Health surveillance of workers with prior exposure to asbestos. Application in the metallurgy/metal mechanical field].

    Science.gov (United States)

    Rivolta, G; Della Foglia, M; Donelli, S; Riboldi, L

    2006-01-01

    To improve the health surveillance program for workers with a known previous exposure to asbestos in a big metallurgic-mechanical industry from Lombardy, the sources of risk and the different exposure levels hare been reconstructed based on specific jobs. The eligibility criteria and a specific work program including information and organization supports hare been established by a work group composed by health physicians, workers and industrial hygienists. The major goals of the program were: to listen and support each worker who perceives worries about his health status; to prevent, if possible, diseases, especially cancer, resulting from exposure; to document the existing injuries for legal compensation. The resulting actions consist of counselling; indication to follow an adequate life and work style; indication, based on specific request of worker, of sanitary checks of first or eventually second level.

  2. Colorectal cancer and non-malignant respiratory disease in asbestos cement and cement workers

    International Nuclear Information System (INIS)

    Jacobsson, K.

    1993-09-01

    Radiologically visible parenchymal changes (small opacities >= 1/0;ILO 1980 classification) were present in 20% of a sample of workers (N=174), employed for 20 years (median) in an asbestos cement plant. Exposure-response relationships were found, after controlling for age and smoking habits. In a sample of asbestos cement workers with symptoms and signs suggestive of pulmonary disease (N=33), increased lung density measured by x-ray computed tomography, and reduced static lung volumes and lung compliance was found. In a cohort of asbestos cement workers (N=1.929) with an estimated median exposure of 1.2 fibres/ml, the mortality from non-malignant respiratory disease was increased in comparison to a regional reference cohort (N=1.233). A two-to three-fold increase of non-malignant respiratory mortality was noted among workers employed for more than a decade in the asbestos cement plant, compared to cement workers (N=1.526), who in their turn did not experience and increased risk compared to the general population. In the cohorts of asbestos cement and cement workers, there was a tow-to three-fold increased incidence of cancer in the right part of the colon, compared to the general population as well as to external reference cohorts of other industrial workers (N=3.965) and fishermen (N=8.092). A causal relation with the exposure to mineral dust and fibres was supported by the findings of higher risk estimated in subgroups with high cumulated asbestos doses or longer duration of cement work. The incidence of cancer in the left part of the colon was not increased. Morbidity data, but not mortality data, disclosed the subsite-specific risk pattern. Both asbestos cement workers and cement workers has an increased incidence of rectal cancer, compared with the general population, and with the fishermen. The risk was, however, of the same magnitude among the other industrial workers. 181 refs

  3. Cost-Benefit Analysis on Countermeasures for Health Risk by Exposure to Asbestos in Japan

    Science.gov (United States)

    Fujinaga, Aiichiro; Hihara, Hidemi; Tatsuno, Makoto

    This study examines asbestos mitigation countermeasures by predicting air concentrations of asbestos, and then cost-benefit analyses is performed. A comparative study was conducted on three cases as follows; case one, demolition by machine & landfill, case two, demolition by hand & landfill, and case three demolition by hand & vitrification treatment. The results showed that if demolition by machine is continued, the risk is greater than 10-4 of upper acceptable risk for 2020. However, if demolition is conducted by hand, the risk is under 10-4 for 2010. And also, the risk will be less than 10-5 of the safety level for environmental standards until 2030. The results show that vitrification deletes the risk on future management at a landfill site, however at a higher cost.

  4. ASBESTOS EXPOSURES DURING ROUTINE FLOOR TILE MAINTENANCE. PART 2: ULTRA HIGH SPEED BURNISHING AND WET-STRIPPING

    Science.gov (United States)

    This study was conducted to evaluate airborne asbestos concentrations during ultra high speed (UHS) burnishing and wet-stripping of asbestos-containing resilient floor tile under two levels of floor care condition (poor and good). Airborne asbestos concentrations were measured by...

  5. Diagnostic delay in malignant pleural mesothelioma due to physicians fixation on history with non-exposure to asbestos

    DEFF Research Database (Denmark)

    Madsen, Poul Henning; Laursen, Christian B.; Davidsen, Jesper Rømhild

    2013-01-01

    To establish the diagnosis of virtually any disease, the clinician must combine a variety of information. Often emphasised in this context is thorough medical history-taking including information on exposure to factors leading to or being associated with the disease in question. Continuous...... assessment of all available information is of utmost importance, as fixation on single details can be misguiding with inappropriate consequences in both the diagnostic and therapeutic approach. This case report presents how an atypical medical history led to a delay in the diagnosis of malignant pleural...... mesothelioma due to a low a priori likelihood of the disease because of non-exposure to asbestos. We highlight the fact that postrationalisation and attempts to renew a diagnostic approach must be carried out each time diagnostic dilemmas emerge, and when some or all diagnostic clues disagree....

  6. Evaluation of the Webler-Brown model for estimating tetrachloroethylene exposure from vinyl-lined asbestos-cement pipes

    Directory of Open Access Journals (Sweden)

    Heeren Timothy C

    2008-06-01

    Full Text Available Abstract Background From May 1968 through March 1980, vinyl-lined asbestos-cement (VL/AC water distribution pipes were installed in New England to avoid taste and odor problems associated with asbestos-cement pipes. The vinyl resin was applied to the inner pipe surface in a solution of tetrachloroethylene (perchloroethylene, PCE. Substantial amounts of PCE remained in the liner and subsequently leached into public drinking water supplies. Methods Once aware of the leaching problem and prior to remediation (April-November 1980, Massachusetts regulators collected drinking water samples from VL/AC pipes to determine the extent and severity of the PCE contamination. This study compares newly obtained historical records of PCE concentrations in water samples (n = 88 with concentrations estimated using an exposure model employed in epidemiologic studies on the cancer risk associated with PCE-contaminated drinking water. The exposure model was developed by Webler and Brown to estimate the mass of PCE delivered to subjects' residences. Results The mean and median measured PCE concentrations in the water samples were 66 and 0.5 μg/L, respectively, and the range extended from non-detectable to 2432 μg/L. The model-generated concentration estimates and water sample concentrations were moderately correlated (Spearman rank correlation coefficient = 0.48, p Conclusion PCE concentration estimates generated using the Webler-Brown model were moderately correlated with measured water concentrations. The present analysis suggests that the exposure assessment process used in prior epidemiological studies could be improved with more accurate characterization of water flow. This study illustrates one method of validating an exposure model in an epidemiological study when historical measurements are not available.

  7. Incidence of cancer and mortality among employees in the asbestos cement industry in Denmark

    DEFF Research Database (Denmark)

    Raffn, E; Lynge, E; Juel, K

    1989-01-01

    In a cohort study of the incidence of cancer and mortality among 7996 men and 584 women employed in the Danish asbestos cement industry between 1928 and 1984 over 99% were traced. Chrysotile asbestos was the only fibre type used until 1946, when amosite and (in 1952) crocidolite were also...... introduced. Chrysotile constituted 89%, amosite 10%, and crocidolite 1% of the asbestos used. During the first 25 years of manufacture the exposure levels were high, especially in areas where the asbestos was handled dry. Measurements from 1948 indicate that the fibre levels may have ranged from 100 to 1600...... for men for non-malignant pulmonary diseases (O/E 1.63; 95% CI 1.33-1.98). Among the group of asbestos cement workers with first employment 1928-40 an excess risk of laryngeal cancer was found (O/E 5.50;95% CI 1.77-12.82). A total of 12 cases of pleural and one of peritoneal mesotheliomas was observed...

  8. A statistical evaluation of asbestos air concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Lange, J.H. [Envirosafe Training and Consultants, Pittsburgh, PA (United States)

    1999-07-01

    Both area and personal air samples collected during an asbestos abatement project were matched and statistically analysed. Among the many parameters studied were fibre concentrations and their variability. Mean values for area and personal samples were 0.005 and 0.024 f cm{sup -}-{sup 3} of air, respectively. Summary values for area and personal samples suggest that exposures are low with no single exposure value exceeding the current OSHA TWA value of 0.1 f cm{sup -3} of air. Within- and between-worker analysis suggests that these data are homogeneous. Comparison of within- and between-worker values suggests that the exposure source and variability for abatement are more related to the process than individual practices. This supports the importance of control measures for abatement. Study results also suggest that area and personal samples are not statistically related, that is, there is no association observed for these two sampling methods when data are analysed by correlation or regression analysis. Personal samples were statistically higher in concentration than area samples. Area sampling cannot be used as a surrogate exposure for asbestos abatement workers. (author)

  9. A statistical evaluation of asbestos air concentrations

    International Nuclear Information System (INIS)

    Lange, J.H.

    1999-01-01

    Both area and personal air samples collected during an asbestos abatement project were matched and statistically analysed. Among the many parameters studied were fibre concentrations and their variability. Mean values for area and personal samples were 0.005 and 0.024 f cm - - 3 of air, respectively. Summary values for area and personal samples suggest that exposures are low with no single exposure value exceeding the current OSHA TWA value of 0.1 f cm -3 of air. Within- and between-worker analysis suggests that these data are homogeneous. Comparison of within- and between-worker values suggests that the exposure source and variability for abatement are more related to the process than individual practices. This supports the importance of control measures for abatement. Study results also suggest that area and personal samples are not statistically related, that is, there is no association observed for these two sampling methods when data are analysed by correlation or regression analysis. Personal samples were statistically higher in concentration than area samples. Area sampling cannot be used as a surrogate exposure for asbestos abatement workers. (author)

  10. Angiogenic effect induced by mineral fibres

    International Nuclear Information System (INIS)

    Carbonari, Damiano; Campopiano, Antonella; Ramires, Deborah; Strafella, Elisabetta; Staffolani, Sara; Tomasetti, Marco; Curini, Roberta; Valentino, Matteo; Santarelli, Lory; Amati, Monica

    2011-01-01

    Highlights: → In this study we described the angiogenetic effect of some mineral fibres. → Wollastonite fibres induce blood vessel formation. → The size and shape of the fibres were important factors for the cell signalling. → Wollastonite induce ROS-NFκB activation and EGFR signalling. → Involvement of wollastonite exposure in the development of pathological conditions. -- Abstract: Due to the toxic effect of asbestos, other materials with similar chemical-physical characteristics have been introduced to substitute it. We evaluate the angiogenic effect of certain asbestos substitute fibres such as glass fibres (GFs), ceramic fibres (CFs) and wollastonite fibres (WFs) and then compare angiogenic responses to those induced by crocidolite asbestos fibres (AFs). An in vitro model using human endothelial cells in small islands within a culture matrix of fibroblasts (Angio-Kit) was used to evaluate vessel formation. The release of IL-6, sIL-R6, IL-8, VEGF-A and their soluble receptors, sVEGFR-1, sVEGFR-2, was determined in the conditioning medium of Angio-Kit system after fibre treatment. ROS formation and cell viability were evaluated in cultured endothelial cells (HUVEC). To evaluate the involvement of intracellular mechanisms, EGFR signalling, ROS formation and nuclear factor-κB (NFκB) pathway were then inhibited by incubating HUVEC cells with AG1478, NAC and PDTC respectively, and the cytokine and growth factor release was analyzed in the culture medium after 7 days of fibre incubation. Among the mineral fibres tested, WFs markedly induced blood vessel formation which was associated with release of IL-6 and IL-8, VEGF-A and their soluble receptors. ROS production was observed in HUVEC after WFs treatment which was associated with cell cytotoxicity. The EGFR-induced ERK phosphorylation and ROS-mediated NFκB activation were involved in the cytokine and angiogenic factor release. However, only the EGFR activation was able to induce angiogenesis. The WFs

  11. A perspective multidisciplinary geological approach for mitigation of effects due to the asbestos hazard

    Science.gov (United States)

    Vignaroli, Gianluca; Rossetti, Federico; Belardi, Girolamo; Billi, Andrea

    2010-05-01

    Asbestos-bearing rock sequences constitute a remarkable natural hazard that poses important threat to human health and may be at the origin of diseases such as asbestosis, mesothelioma and lung cancer). Presently, asbestos is classified as Category 1 carcinogen by world health authorities. Although regulatory agencies in many countries prohibit or restrict the use of asbestos, and discipline the environmental asbestos exposure, the impact of asbestos on human life still constitutes a major problem. Naturally occurring asbestos includes serpentine and amphibole minerals characterised by fibrous morphology and it is a constituent of mineralogical associations typical of mafic and ultramafic rocks within the ophiolitic sequences. Release of fibres can occur both through natural processes (erosion) and through human activities requiring fragmentation of ophiolite rocks (quarrying, tunnelling, railways construction, etc.). As a consequence, vulnerability is increasing in sites where workers and living people are involved by dispersion of fibres during mining and milling of ophiolitic rocks. By analysing in the field different exposures of ophiolitic sequences from the Italian peninsula and after an extensive review of the existing literature, we remark the importance of the geological context (origin, tectonic and deformation history) of ophiolites as a first-order parameter in evaluating the asbestos hazard. Integrated structural, textural, mineralogical and petrological studies significantly improve our understanding of the mechanisms governing the nucleation/growth of fibrous minerals in deformation structures (both ductile and brittle) within the ophiolitic rocks. A primary role is recognised in the structural processes favouring the fibrous mineralization, with correlation existing between the fibrous parameters (such as mineralogical composition, texture, mechanics characteristics) and the particles released in the air (such as shape, size, and amount liberated

  12. Assessment of occupational exposure to asbestos fibers: Contribution of analytical transmission electron microscopy analysis and comparison with phase-contrast microscopy.

    Science.gov (United States)

    Eypert-Blaison, Céline; Romero-Hariot, Anita; Clerc, Frédéric; Vincent, Raymond

    2018-03-01

    From November 2009 to October 2010, the French general directorate for labor organized a large field-study using analytical transmission electron microscopy (ATEM) to characterize occupational exposure to asbestos fibers during work on asbestos containing materials (ACM). The primary objective of this study was to establish a method and to validate the feasibility of using ATEM for the analysis of airborne asbestos of individual filters sampled in various occupational environments. For each sampling event, ATEM data were compared to those obtained by phase-contrast optical microscopy (PCOM), the WHO-recommended reference technique. A total of 265 results were obtained from 29 construction sites where workers were in contact with ACM. Data were sorted depending on the combination of the ACM type and the removal technique. For each "ACM-removal technique" combination, ATEM data were used to compute statistical indicators on short, fine and WHO asbestos fibers. Moreover, exposure was assessed taking into account the use of respiratory protective devices (RPD). As in previous studies, no simple relationship was found between results by PCOM and ATEM counting methods. Some ACM, such as asbestos-containing plasters, generated very high dust levels, and some techniques generated considerable levels of dust whatever the ACM treated. On the basis of these observations, recommendations were made to measure and control the occupational exposure limit. General prevention measures to be taken during work with ACM are also suggested. Finally, it is necessary to continue acquiring knowledge, in particular regarding RPD and the dust levels measured by ATEM for the activities not evaluated during this study.

  13. Analysis of radioactivity increase of rad waste filled in fibre-reinforced concrete container regarding external exposure of workers

    International Nuclear Information System (INIS)

    Baratova, D.; Hrncir, T.; Necas, V.

    2012-01-01

    The paper deals with the assessment of the external radiation exposure of workers performing the individual tasks associated with disposal of the fibre-reinforced concrete containers in the National Radioactive Waste Repository in Mochovce. Models for fibre-reinforced concrete containers with maximum activity allowable for transport and for fibre-reinforced concrete containers contained radionuclides at the common level of activity concentration were created in order to analyze the option of fibre-reinforced concrete containers radioactivity increase. Calculations of individual effective doses have been carried out for three workers who work in the control area of the waste disposal facility dosimetrist, assistant and crane worker. (Authors)

  14. Malignant mesothelioma: attributable risk of asbestos exposure; Mesotheliome malin: risque attribuable a une exposition a l'amiante

    Energy Technology Data Exchange (ETDEWEB)

    Spirtas, R.

    1998-03-01

    The objective of this study is to evaluate the risk due to asbestos in the supervening of mesothelioma from interviews by phone of members of family with cases and witnesses, on the professional activities or others causes that could expose these persons to asbestos during their whole life. (N.C.)

  15. Characterization of vehicular brake service personnel exposure to airborne asbestos and particulate.

    Science.gov (United States)

    Weir, F W; Tolar, G; Meraz, L B

    2001-12-01

    Evaluation of fibers and total particulate generated during the servicing of drum brakes on motor vehicles as well as during the resurfacing (arcing) of brake shoes was conducted. Conditions for the studies were based on review of contemporary (approximately 1950-1980) working practices in the industry. This work was conducted in two parts. Phase 1 estimated the release of asbestos fibers and total particulate during brake inspection and replacement of light-duty vehicle rear drum brakes at an auto/truck repair facility. Two distinct work practices were evaluated: One rear wheel from each vehicle was serviced using compressed air to remove dust while the second rear wheel was serviced without compressed air. Area and personal monitoring of fiber levels demonstrated counts (without compressed air) that ranged from 0.05 to 0.2 f/cc. Fiber counts when using compressed air averaged from 0.05 to 0.9 f/cc. Results from real-time aerosol monitoring indicated elevated dust levels for about 15 minutes after blow out. With shop doors open, dust levels increased to 5.0 mg/m3 at blow out and returned to 0.08 mg/m3 within two minutes. When the shop doors were closed, the dust levels reached 13.5 mg/m3 at blow out and decreased to 1.68 mg/m3 within one minute and to background within 14 minutes. The Phase 2 series evaluated the release of fibers and other particulate from are grinding. For operations conducted under conditions simulating a workplace, a mean of 0.19 f/cc +/- 0.16 was determined. Dust levels averaged 0.25 mg/m3 +/- 0.05. Brake service monitoring in these tests demonstrates that asbestos fiber concentrations, considered on a time weighted average basis, should not exceed currently acceptable workplace standards whether or not the worker uses compressed air, nor during the arc grinding process when arcing is conducted in accord with the design of the equipment.

  16. Approaches for the development of occupational exposure limits for man-made mineral fibres (MMMFs)

    International Nuclear Information System (INIS)

    Ziegler-Skylakakis, Kyriakoula

    2004-01-01

    Occupational exposure limits (OELs) are an essential tool in the control of exposure to hazardous chemical agents, and serve to minimise the occurrence of occupational diseases associated with such exposure. The setting of OELs, together with other associated measures, forms an essential part of the European Community's strategy on health and safety at work, upon which the legislative framework for the protection of workers from risks related to chemical agents is based. The European Commission is assisted by the Scientific Committee on Occupational Exposure Limits (SCOEL) in its work of setting OELs for hazardous chemical agents. The procedure for setting OELs requires information on the toxic mechanisms of an agent that should allow to differentiate between thresholded and non-thresholded mechanisms. In the first case, a no-observed adverse effect level (NOAEL) can be defined, which can be the basis for a derivation of an OEL. In the latter case, any exposure is correlated with a certain risk. If adequate scientific data are available, SCOEL estimates the risk associated with a series of exposure levels. This can then be used for guidance, when setting OELs at European level. Man-made mineral fibres (MMMFs) are widely used at different worksites. MMMF products can release airborne respirable fibres during their production, use and removal. According to the classification of the EU system, all MMMF fibres are considered to be irritants and are classified for carcinogenicity. EU legislation foresees the use of limit values as one of the provisions for the protection of workers from the risks related to exposure to carcinogens. In the following paper, the research requirements identified by SCOEL for the development of OELs for MMMFs will be presented

  17. Deconstruction of the asbestos cement roof of the central market in Alicante difficulties in the practical application of RD 396/2006 (works with risk of exposure to asbestos); Deconstruccion de la cubierta de asbesto-cemento del Mercado Central de Abastos de Alicante. Dificultades en la aplicacion practica del RD 396/2006 (trabajos con riesgo de exposicion al amianto)

    Energy Technology Data Exchange (ETDEWEB)

    Sirvent Perez, C. D.

    2010-07-01

    The project and the works described below mainly deal with the deconstruction of the current asbestos-cement roof of the Central Market in Alicante in order to replace it with another roof of zinc diamond scales, similar to the original which was implementation in 1921 when the building went into service. These works were necessary to avoid the causes (and consequences) that generate the appearance of rainwater infiltration, as was described in an earlier report that was done in 2006, also drafted by the undersigned technicians. The article shows the difficulty of the practical application of RD 396/2006 (minimum health and safety requirements for works with risks of exposure to asbestos) in a case of a certain complexity such as this, especially in areas such as economic (rising costs), technical (increasing difficulty of implementation), and the total duration of the work (total time extension due to interference with other trades). (Author) 14 refs.

  18. Community exposure to asbestos in Casale Monferrato: from research on psychological impact to a community needs-centered healthcare organization

    Directory of Open Access Journals (Sweden)

    Antonella Granieri

    2015-12-01

    Full Text Available INTRODUCTION: Asbestos exposure has a negative impact on both the physical health of the population, and on its psychological and community components. Usually such issues are addressed via top-down strategies, but this approach is unable to address the interpersonal processes connected to living in a specific context. METHOD: The work carried on in Casale Monferrato since 2006 proceeds in the opposite direction: promoting a different interaction between health system policy-makers and administrators, field actions, and system thinking. Our goal was to create a reliable model that could fit into other contexts, while being flexible and adapting to specific backgrounds. Starting from the results obtained during a first assessment phase, a psychoanalytic group was arranged, aimed at promoting the symbolization and signification of the emotions related to the ill-fated prognosis. RESULTS: The clinical work offers a space for handling the illness and its psychological impact, in order to achieve: 1 a subjective perception of themselves as not impotent and alone; 2 improved abilities of caregivers to manage the disease; 3 enhanced quality of residual life. CONCLUSIONS: An integrated multidimensional intervention promotes resilience in the community, but it requires time, for patients, relatives, and the professionals involved. Only with the combined support of oncologists and the entire ward staff will an internal trust be free to grow within a somato-psychic space able to accommodate and sustain the participants during the final stages of their own life, or that of someone close to them.

  19. Asbestos-related diseases in automobile mechanics.

    Science.gov (United States)

    Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

    2012-01-01

    Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyse the frequency of pleural and parenchymal abnormalities on high-resolution computed tomography (HRCT) in a population of automobile mechanics. The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos-related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers; who in the case of disagreement discussed until they reached agreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Pleural plaques were observed in five cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in one case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers.

  20. An evaluation of short-term exposures of brake mechanics to asbestos during automotive and truck brake cleaning and machining activities.

    Science.gov (United States)

    Richter, Richard O; Finley, Brent L; Paustenbach, Dennis J; Williams, Pamela R D; Sheehan, Patrick J

    2009-07-01

    Historically, the greatest contributions to airborne asbestos concentrations during brake repair work were likely due to specific, short-duration, dust-generating activities. In this paper, the available short-term asbestos air sampling data for mechanics collected during the cleaning and machining of vehicle brakes are evaluated to determine their impact on both short-term and daily exposures. The high degree of variability and lack of transparency for most of the short-term samples limit their use in reconstructing past asbestos exposures for brake mechanics. However, the data are useful in evaluating how reducing short-term, dust-generating activities reduced long-term exposures, especially for auto brake mechanics. Using the short-term dose data for grinding brake linings from these same studies, in combination with existing time-weighted average (TWA) data collected in decades after grinding was commonplace in rebuilding brake shoes, an average 8-h TWA of approximately 0.10 f/cc was estimated for auto brake mechanics that performed arc grinding of linings during automobile brake repair (in the 1960s or earlier). In the 1970s and early 1980s, a decline in machining activities led to a decrease in the 8-h TWA to approximately 0.063 f/cc. Improved cleaning methods in the late 1980s further reduced the 8-h TWA for most brake mechanics to about 0.0021 f/cc. It is noteworthy that when compared with the original OSHA excursion level, only 15 of the more than 300 short-term concentrations for brake mechanics measured during the 1970s and 1980s possibly exceeded the standard. Considering exposure duration, none of the short-term exposures were above the current OSHA excursion level.

  1. A comparison of parallel dust and fibre measurements of airborne chrysotile asbestos in a large mine and processing factories in the Russian Federation

    NARCIS (Netherlands)

    Feletto, Eleonora; Schonfeld, Sara J; Kovalevskiy, Evgeny V; Bukhtiyarov, Igor V; Kashanskiy, Sergey V; Moissonnier, Monika; Straif, Kurt; Kromhout, Hans

    2017-01-01

    INTRODUCTION: Historic dust concentrations are available in a large-scale cohort study of workers in a chrysotile mine and processing factories in Asbest, Russian Federation. Parallel dust (gravimetric) and fibre (phase-contrast optical microscopy) concentrations collected in 1995, 2007 and 2013/14

  2. Effects of Libby amphibole asbestos exposure on two rat models of rheumatoid arthritis

    Science.gov (United States)

    Epidemiological data suggests that occupational exposure to the amphibole-containing vermiculite in Libby, MT was associated with increased risk for developing autoimmune diseases and had an odds ratio of 3.23 for developing rheumatoid arthritis (RA). Our goal was to determine wh...

  3. Prevention of Asbestos-Related Disease in Countries Currently Using Asbestos

    Directory of Open Access Journals (Sweden)

    Daniela Marsili

    2016-05-01

    Full Text Available More than 40 years of evaluation have consistently confirmed the carcinogenicity of asbestos in all of its forms. This notwithstanding, according to recent figures, the annual world production of asbestos is approximatively 2,000,000 tons. Currently, about 90% of world asbestos comes from four countries: Russia, China, Brazil and Kazakhstan; and the wide use of asbestos worldwide represents a global threat. The purpose of this paper is to present a review of the asbestos health impact and to discuss the role of epidemiological investigations in countries where asbestos is still used. In these contexts, new, “local” studies can stimulate awareness of the size of the problem by public opinion and other stakeholders and provide important information on the circumstances of exposure, as well as local asbestos-related health impacts. This paper suggests an agenda for an international cooperation framework dedicated to foster a public health response to asbestos, including: new epidemiological studies for assessing the health impact of asbestos in specific contexts; socio-cultural and economic analyses for contributing to identifying stakeholders and to address both the local and global implications of asbestos diffusion; public awareness on the health and socio-economic impact of asbestos use and banning.

  4. The Case for a Global Ban on Asbestos

    Science.gov (United States)

    LaDou, Joseph; Castleman, Barry; Frank, Arthur; Gochfeld, Michael; Greenberg, Morris; Huff, James; Joshi, Tushar Kant; Landrigan, Philip J.; Lemen, Richard; Myers, Jonny; Soffritti, Morando; Soskolne, Colin L.; Takahashi, Ken; Teitelbaum, Daniel; Terracini, Benedetto; Watterson, Andrew

    2010-01-01

    Background All forms of asbestos are now banned in 52 countries. Safer products have replaced many materials that once were made with it. Nonetheless, many countries still use, import, and export asbestos and asbestos-containing products, and in those that have banned other forms of asbestos, the so-called “controlled use” of chrysotile asbestos is often exempted from the ban. In fact, chrysotile has accounted for > 95% of all the asbestos used globally. Objective We examined and evaluated the literature used to support the exemption of chrysotile asbestos from the ban and how its exemption reflects the political and economic influence of the asbestos mining and manufacturing industry. Discussion All forms of asbestos, including chrysotile, are proven human carcinogens. All forms cause malignant mesothelioma and lung and laryngeal cancers, and may cause ovarian, gastrointestinal, and other cancers. No exposure to asbestos is without risk. Illnesses and deaths from asbestos exposure are entirely preventable. Conclusions All countries of the world have an obligation to their citizens to join in the international endeavor to ban the mining, manufacture, and use of all forms of asbestos. An international ban is urgently needed. There is no medical or scientific basis to exempt chrysotile from the worldwide ban of asbestos. PMID:20601329

  5. Asbestos-related diseases in automobile mechanics

    Science.gov (United States)

    Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

    2012-01-01

    Purpose Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyze the frequency of pleural and parenchymal abnormalities on HRCT in a population of automobile mechanics. Methods The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos–related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers, with further consensus in the case of disagreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Results Pleural plaques were observed in 5 cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in 1 case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. Conclusions The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers. PMID:21965465

  6. EVALUATION OF ASBESTOS EXPOSURE IN DUMANLI VILLAGE (ÇANAKKALE-TURKEY FROM A MEDICAL GEOLOGY VIEWPOINT: AN INTER-DISCIPLINARY STUDY

    Directory of Open Access Journals (Sweden)

    Erdinç YİĞİTBAŞ

    2015-12-01

    Full Text Available Biga Peninsula has many varied and interesting medical geologic problems, as well as being rich in natural geological resources. Mainly these problems are natural radioactivity, mineral dust, metal/mineral contamination in drinking water, acid rock/mine drainage, and problems related to geothermal and drinking water. With this view exposure to asbestos was surveyed and the results of this survey were evaluated by earth scientists and medical doctors. This inter-disciplinary study was done in Dumanlı village (Çanakkale-Turkey in the Biga Peninsula, NW Turkey. Studies have been carried out in earth sciences and the health sciences simultaneously. The asbestiform minerals around Dumanlı village are contained in sheared serpentinites which occur as tectonic slices and lenses within Çamlıca metamorphics. These tectonic slices and lenses are bounded by strike-slip faults and probably obtained their final tectonic positions in a transpressional regime during late Cretaceous- early Eocene time. Asbestiform minerals occur within stretching-shear zones in the strike- slip system. Petrographic and mineralogic indications show that the asbestiform minerals are clinochrysotile, lizardite, antigorite and actinolite. In parallel with earth science studies; verbal autopsy, pulmonary function tests and radiological examination studies were car- ried out. A significant correlation between asbestos exposure and radiographic pathology was identified in the region and it was understood that the duration of exposure in these ca- ses varies from 23-80 years.

  7. Increased 8-isoprostane, a marker of oxidative stress in exhaled breath condensate in subjects with asbestos exposure

    Czech Academy of Sciences Publication Activity Database

    Pelclová, D.; Fenclová, Z.; Kačer, P.; Kuzma, Marek; Navrátil, Tomáš; Lebedová, J.

    2008-01-01

    Roč. 46, č. 5 (2008), s. 484-489 ISSN 0019-8366 R&D Projects: GA MZd NR9338 Institutional research plan: CEZ:AV0Z50200510; CEZ:AV0Z40400503 Keywords : asbestos * asbestosis * pleural hyalinosis Subject RIV: EE - Microbiology, Virology Impact factor: 0.745, year: 2008

  8. Exposure and acute exposure-effects before and after modification of a contaminated humidification system in a synthetic-fibre plant

    NARCIS (Netherlands)

    Pal, TM; de Monchy, JGR; Groothoff, JW; Post, D

    Objective: Follow-up study of exposure and acute exposure-effects after modification to steam humidification of a contaminated cold water system which had caused an outbreak of humidifier fever in a synthetic-fibre plant. Methods: Before and after modification of the system aerobiological

  9. Mesotelioma maligno: descripción clínica y radiológica de 45 casos con y sin exposición a asbestos Malignant mesothelioma: clinical and radiological picture of 45 cases with or without exposure to asbestos

    Directory of Open Access Journals (Sweden)

    Ma. del Pilar García-López

    2000-11-01

    Full Text Available OBJETIVO: Identificar y caracterizar los principales síntomas, la presentación clínica y las alteraciones radiológicas de pacientes con mesotelioma maligno (MM, admitidos en una institución gubernamental especializada en enfermedades del tórax. MATERIAL Y MÉTODOS: Se realizó un estudio retrospectivo en el cual se revisaron los registros médicos y radiológicos de pacientes diagnosticados con MM, admitidos en el Instituto Nacional de Enfermedades Respiratorias (INER, en la ciudad de México, de 1991 a 1998. Se incluyeron los siguientes datos: edad, ocupación, exposición a asbestos, latencia, historia familiar en relación con otras neoplasias, sintomatología clínica y alteraciones radiológicas. Se calcularon porcentajes por sexo y grupo de edad. RESULTADOS: Se encontraron 45 casos con MM, y en 80% de ellos no se pudo documentar historia exposicional a asbestos. El grupo de edad con mayor frecuencia se encontró entre los 51-60 años. Disnea y dolor torácico fueron los principales síntomas. Las anormalidades radiológicas estuvieron constituidas por derrame y engrosamiento pleural en 75% de los pacientes. CONCLUSIONES: La presentación clínica y las anormalidades radiológicas en pacientes con MM sin historia de exposición a asbestos fueron similares a las de los pacientes con antecedentes de exposición a asbestos.OBJECTIVE: Our aim was to identify and describe the main symptoms, clinical presentation, and radiographic changes in malignant mesothelioma (MM patients. MATERIAL AND METHODS: We reviewed the medical and X-ray records of all patients diagnosed with MM, admitted between 1991 and 1998 to the National Institute of Respiratory Diseases (INER, which is a governmental institution specialized in chest disease in Mexico City. The following data were collected: Age, occupation, asbestos exposure, latency, family history of cancer, clinical symptoms, and X-ray changes. Data are presented as percentages by sex and age group

  10. Asbestos-related pleuropulmonary diseases: iconographic essay

    International Nuclear Information System (INIS)

    Gustavo de Souza Portes Meirelles; Rodrigues, Reynaldo Tavares; Nery, Luiz Eduardo

    2007-01-01

    The aim of this study is to illustrate the main imaging findings of asbestos-related diseases. Pleural and pulmonary asbestos-related diseases range from benign conditions, like pleural effusion and pleural plaques, to some neoplasias, such as lung cancer and malignant mesothelioma. Pleural effusion is the earliest finding after asbestos exposure, but the imaging findings are not specific. Diffuse pleural thickening involves the visceral pleura and pleural plaques are considered to be hallmarks of exposure. Asbestosis is the pulmonary fibrosis due to asbestos. Rounded atelectasis is a peripheral lung collapse in these individuals, generally related to pleural disease. Some neoplasias, like lung carcinoma and pleural mesothelioma, are more prevalent in asbestos-exposed subjects. (author)

  11. [Comparative carcinogenic properties of basalt fiber and chrysotile-asbestos].

    Science.gov (United States)

    Nikitina, O V; Kogan, F M; Vanchugova, N N; Frash, V N

    1989-01-01

    In order to eliminate asbestos adverse effect on workers' health it was necessary to use mineral rayon, primarily basalt fibre, instead of asbestos. During a chronic experiment on animals the oncogenicity of 2 kinds of basalt fibre was studied compared to chrysotile asbestos. The dust dose of 25 mg was twice administered by intraperitonial route. All types of dust induced the onset of intraperitonial mesotheliomas but neoplasm rates were significantly lower in the groups exposed to basalt fibre. There was no credible data on the differences between the groups exposed to various types of basalt fibre. Since the latter produced some oncogenic effect, it was necessary to develop a complex of antidust measures, fully corresponding to the measures adopted for carcinogenic dusts.

  12. Exposure Assessment of Particulate Matter from Abrasive Treatment of Carbon and Glass Fibre-Reinforced Epoxy-Composites

    DEFF Research Database (Denmark)

    Jensen, Alexander C. Ø.; Levin, Marcus; Koivisto, Antti J.

    2015-01-01

    The use of composites is ever increasing due to their important structural and chemical features. The composite component production often involves high energy grinding and sanding processes to which emissions workers are potentially exposed. In this study we investigated the machining of carbon...... and glass fibre-reinforced epoxy composite materials at two facilities. We measured particle number concentrations and size distributions of the released material in near field and far field during sanding of glass-and carbon fibre-reinforced composites. We assessed the means of reducing exposure during...

  13. Evaluation of the fate and pathological response in the lung and pleura of brake dust alone and in combination with added chrysotile compared to crocidolite asbestos following short-term inhalation exposure.

    Science.gov (United States)

    Bernstein, D M; Rogers, R A; Sepulveda, R; Kunzendorf, P; Bellmann, B; Ernst, H; Creutzenberg, O; Phillips, J I

    2015-02-15

    This study was designed to provide an understanding of the biokinetics and potential toxicology in the lung and pleura following inhalation of brake dust following short term exposure in rats. The deposition, translocation and pathological response of brake-dust derived from brake pads manufactured with chrysotile were evaluated in comparison to the amphibole, crocidolite asbestos. Rats were exposed by inhalation 6h/day for 5 days to either brake-dust obtained by sanding of brake-drums manufactured with chrysotile, a mixture of chrysotile and the brake-dust or crocidolite asbestos. The chrysotile fibers were relatively biosoluble whereas the crocidolite asbestos fibers persisted through the life-time of the animal. This was reflected in the lung and the pleura where no significant pathological response was observed at any time point in the brake dust or chrysotile/brake dust exposure groups through 365 days post exposure. In contrast, crocidolite asbestos produced a rapid inflammatory response in the lung parenchyma and the pleura, inducing a significant increase in fibrotic response in both of these compartments. Crocidolite fibers were observed embedded in the diaphragm with activated mesothelial cells immediately after cessation of exposure. While no chrysotile fibers were found in the mediastinal lymph nodes, crocidolite fibers of up to 35 μm were observed. These results provide support that brake-dust derived from chrysotile containing brake drums would not initiate a pathological response in the lung or the pleural cavity following short term inhalation. Copyright © 2014. Published by Elsevier Inc.

  14. Asbestos related diseases among workers of asbestos processing plants in relation to type of production and asbestos use.

    Science.gov (United States)

    Szeszenia-Dąbrowska, Neonila; Świątkowska, Beata; Sobala, Wojciech; Szubert, Zuzanna; Wilczyńska, Urszula

    2015-01-01

    Asbestos dust is one of the most dangerous pneumoconiotic and carcinogenic agents. The aim of this study was to assess the occurrence of asbestosis and pleural mesothelioma, depending on asbestos consumption and the type of manufactured products, among former asbestos workers in Poland. The study subjects included employees of 18 large state-owned asbestos processing enterprises operating in the Polish market in 1945-1998. The study is based on data obtained from asbestos company records and the Central Register of Occupational Diseases data on the cases of asbestosis and mesothelioma for the period from 1970 till 2012 as well as data from Amiantus Programme. The analysis was performed for 5 sectors comprising plants classified according to the products manufactured and applied production technology. In the study period, 2160 cases of asbestosis and 138 cases of mesothelioma were reported. The plants processed a total of about 2 million tons of asbestos, including about 7.5% of crocidolite. Total asbestosis consumption was a strong predictor of the rate of asbestosis incidence (R2 = 0.68, p = 0.055). The highest risk occurrence of asbestosis was observed in the production of textiles and sealing products. Mesothelioma occurred only in plants where crocidolite had been ever processed. Total asbestos consumption was a strong predictor of the rate of asbestosis incidence. The observation confirms the relationship between exposure to crocidolite and the occurrence of mesothelioma, regardless of the manufactured products, and suggests the absence of such a link for the total volume of asbestos consumption.

  15. Asbestos bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Jentschke, M

    1982-01-01

    The publication of this special bibliography meets the desire for information on the problem of asbestos from the viewpoint of safety at work. It was compiled from the information stored at the Central Institute for Safety at work in Dresden, the Central Institute of Occupational Medicine in Berlin, the Authority for Safety at Work with the Ministry of Building in Berlin and the Medical Service of the Transport Business in Berlin, as well as with specialists from the institutions mentioned and of the authority for Safety at work, occupational hygiene and toxicology in the chemical industry of Halle and the inspector of occupational hygiene of the council of the district of Schwerin. The bibliography is a selection of the information sources available at the above-mentioned institutions. It makes no claim to completeness.

  16. Asbestos Utilization Costs on the Example of Functioning Landfill of Hazardous Waste

    Science.gov (United States)

    Polek, Daria

    2017-12-01

    Asbestos is a trademark of mineral fibres, which are the natural minerals found in nature. Products containing asbestos fibres, in accordance with the national and EU legislation, are covered by the production prohibition and forced to be removed. In Poland, the asbestos removal process started with the adaptation of the EU law by the Council of Ministers Treatment Program of the National Asbestos for the years 2009-2032. The purpose of the dissertation was to analyse the costs associated with the disposal of the costs of collection, transport and disposal of waste. Methodology consisted in obtaining information on the raw materials needed to produce asbestos sheets. The analysis allowed us to determine the asbestos removal cost and include state subsidies in the calculations.

  17. Bamboo Fibre Reinforced Cement Used as a Roofing Sheet | Alade ...

    African Journals Online (AJOL)

    Bamboo fibre roofing sheet was able to withstand an average load of 51Kg, which is above the minimum required strength of 50kg. Comparatively, Asbestos roofing sheets and coconut fibre roofing sheets of similar dimensions had failure loads of 104.65Kg and 79Kg respectively. When immersed in water, bamboo fibre ...

  18. Pleural mesothelioma: dose-response relation at low levels of asbestos exposure in a french population-based case-control study; Mesotheliome pleural: relation dose-reponse a faibles niveaux d'exposition a l'amiante dans une etude cas-temoins au sein d'une polulation francaise

    Energy Technology Data Exchange (ETDEWEB)

    Iwatsubo, Y.; Pairo, J.C.; Boutin, C.; Menard, O.; Massin, N.; Caillaud, D.; Orlowski, E.; Galateau-Salle, F.; Bignon, J.; Brochard, P.

    1998-03-01

    The objectives of this study were to study the dose-response relationship between professional exposure to asbestos and the supervening of the pleural mesothelioma in general population. This work notes an excess of death by pulmonary cancer among the asbestos-cement workers but one can regret the weakness of the exposure estimation (only one source of exposure is considered) and that some others risk factors have not been taken into account (tobacco, for example). (N.C.)

  19. Parenchymal asbestosis due to primary asbestos exposure among ship-breaking workers: report of the first cases from Bangladesh.

    Science.gov (United States)

    Muralidhar, Venkiteswaran; Ahasan, Md Faizul; Khan, Ahad Mahmud

    2017-11-03

    We report for the first time asbestosis among ship-breaking workers of Sitakunda in Bangladesh who were exposed to asbestos during ship-based and beach-based operations for at least 10 years. Asbestosis was present among 35% of workers. Years of work (>20) and forced vital capacity (<80% of predicted) were significantly associated with the disease. Currently, global ship-breaking operations are mainly concentrated in the Indian subcontinent, and Bangladesh has the majority share. Ninety per cent of domestic steel is produced in the ship-breaking operations in Bangladesh and is an important contributor to the economy. It also gives employment to more than 100 000 people. It is imperative to medically check up all the workers for benign and malignant diseases causally related to asbestos among these vulnerable population of workers. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. Asbestos in toys: an exemplary case.

    Science.gov (United States)

    Silvestri, Stefano; Di Benedetto, Francesco; Raffaell, Corrado; Veraldi, Angela

    2016-01-01

    DAS was an artificial clay which, once molded, hardened at room temperature. It was largely used as a toy between 1963 and 1975 in Italy, Netherlands, Germany, UK and Norway. This case report describes and reports the presence of asbestos in DAS. We investigated the presence of asbestos in DAS using light and electron microscopy on samples of the original material. We searched administrative documents at the State Archive of Turin and conducted interviews with past employees on annual production, suppliers, and purchasers. The analytical tests confirmed the presence of asbestos fibers in DAS: about 30% of its composition. The documents found at the State Archive confirmed the annual purchase of hundreds tons of raw asbestos from the Amiantifera di Balangero, the Italian asbestos mine. DAS was found to be used also within craftsmanship. Asbestos fibers in DAS may have caused exposure to production workers and a variety of users, including artists, teachers, and children. Over 13 years, about 55 million packs of DAS were produced and sold. The number of users is difficult to estimate but may have been in the order of millions. In Italy, a specific question on the use of DAS has been included in a routinely used mesothelioma questionnaire. As DAS was exported to other countries, our findings suggest that mesothelioma patients should be asked about their past use of DAS, in particular individuals not reporting a clear past asbestos exposure. Additionally, this discovery shows the incompleteness of records on asbestos uses and suggests to test items, including toys, imported from countries where asbestos is not forbidden.

  1. Asbestos-related diffuse pleural thickening.

    Science.gov (United States)

    Fujimoto, Nobukazu; Kato, Katsuya; Usami, Ikuji; Sakai, Fumikazu; Tokuyama, Takeshi; Hayashi, Seiji; Miyamoto, Kenji; Kishimoto, Takumi

    2014-01-01

    The clinical features of asbestos-related diffuse pleural thickening (DPT) remain unclear. To clarify the association between radiological findings of DPT and respiratory function. Medical data from patients with asbestos-related DPT were collected, including their history of occupational or neighborhood asbestos exposure, initial symptoms, modified Medical Research Council dyspnea grade, smoking history, radiological findings, and respiratory function test results. There were 106 DPT patients between 2005 and 2010 [i.e. 103 men (97.2%) and 3 women (2.8%)]. The median age at diagnosis was 69 years (range 46-88). Patient occupations related to asbestos exposure included: asbestos product manufacturing (n = 17); the shipbuilding industry (n = 14); the construction industry (n = 13); heat insulation work (n = 12); plumbing, asbestos spraying, and electrical work (n = 7 each), and transportation and demolition work (n = 4 each). The median duration of asbestos exposure was 25 years (range 2-54), and the median latency period before the onset of DPT was 46 years (range 25-66). Involvement of the costophrenic angle (CPA) was also negatively correlated with the percent vital capacity (%VC; r = -0.448, p < 0.01). Pleural thickness and the craniocaudal and horizontal extension of pleural thickening, as determined by chest computed tomography (CT), were also negatively correlated with %VC (r = -0.226, p < 0.05; r = -0.409, p < 0.01, and r = -0.408, p < 0.01, respectively). DPT develops after a long latency period following occupational asbestos exposure and causes marked respiratory dysfunction. The extension of DPT should be evaluated by chest CT, and chest X-ray would be important for the evaluation of the involvement of the CPA.

  2. Narażenie zawodowe i środowiskowe na azbest w świetle obowiązujących aktów prawnych = Environmental and occupational exposure to asbestos in the light of applicable legislation

    Directory of Open Access Journals (Sweden)

    Anna Kowalczyk

    2015-09-01

    Anna Kowalczyk1, Ewelina Kozłowska2, Jolanta Pacian3   1. Studenckie Koło Naukowe Zdrowia Publicznego, Wydział Nauk o Zdrowiu, Uniwersytet Medyczny w Lublinie 2. Samodzielna Pracownia Epidemiologii, Wydział Nauk o Zdrowiu, Uniwersytet Medyczny w Lublinie 3. Katedra Zdrowia Publicznego, Wydział Nauk o Zdrowiu, Uniwersytet Medyczny w Lublinie   Autor do korespondencji / Author for correspondence lic. Anna Kowalczyk e-mail: annakowalczyklublin@gmail.com   STRESZCZENIE Azbest stwarza ogromne zagrożenie zdrowotne. Jest szczególnie niebezpieczny w procesie wydobywania i produkcji, podczas obróbki, eksploatacji, usuwania,  w wyniku uszkodzeń lub korozji wyrobów zawierających azbest. Celem pracy jest przedstawienie regulacji prawnych dotyczących środowiskowego i zawodowego narażenia na azbest. Przedmiotem analizy są akty prawne dotyczące: zakazu stosowania azbestu, bezpieczeństwa i higieny pracy w narażeniu na azbest, gospodarki i transportu odpadów azbestowych, budownictwa oraz szeroko pojętej ochrony środowiska przed szkodliwym działaniem azbestu. W pracy szczegółowo omówiono zasady ochrony zdrowia pracowników i byłych pracowników narażonych na azbest. Przybliżono podstawowe założenia programu wieloletniego pt. „Program Oczyszczania Kraju z Azbestu na lata 2009-2032”. Zastosowaną metodą była metoda dogmatyczna oraz prawno-porównawcza polegająca na analizie aktów prawnych oraz dostępnej literatury.   Słowa kluczowe: azbest, narażenie zawodowe, narażenie środowiskowe, akty prawne.       ABSTRACT Asbestos creates a huge threat. It is particularly dangerous in the process of extraction and production, while processing, use, disposal or as a result of damage or corrosion of products containing asbestos. An aim of the work is to present regulations concerning environmental and occupational exposure to asbestos. The subject of analysis are legislative acts relating: prohibition of asbestos use, health and safety at work in

  3. Human health risks associated with asbestos abatement.

    Science.gov (United States)

    Chrostowski, P C; Foster, S A; Anderson, E L

    1991-09-01

    Upperbound lifetime excess cancer risks were calculated for activities associated with asbestos abatement using a risk assessment framework developed for EPA's Superfund program. It was found that removals were associated with cancer risks to workers which were often greater than the commonly accepted cancer risk of 1 x 10(-6), although lower than occupational exposure limits associated with risks of 1 x 10(-3). Removals had little effect in reducing risk to school populations. Risks to teachers and students in school buildings containing asbestos were approximately the same as risks associated with exposure to ambient asbestos by the general public and were below the levels typically of concern to regulatory agencies. During abatement, however, there were increased risks to both workers and nearby individuals. Careless, everyday building maintenance generated the greatest risk to workers followed by removals and encapsulation. If asbestos abatement was judged by the risk criteria applied to EPA's Superfund program, the no-action alternative would likely be selected in preference to removal in a majority of cases. These conclusions should only be interpreted within the context of an overall asbestos risk management program, which includes consideration of specific fiber types and sizes, sampling and analytical limitations, physical condition of asbestos-containing material, episodic peak exposures, and the number of people potentially exposed.

  4. Toxicity evaluation for the broad area of the asbestos mine of northern Greece.

    Science.gov (United States)

    Anastasiadou, Kalliopi; Gidarakos, Evangelos

    2007-01-02

    The existing data regarding the quality of the environment in the asbestos mine of northern Greece (MABE) region related to the presence of asbestos are insufficient to determine the current pollution problem. In the present work, a first approach to this problem has been taken through a toxicity risk assessment. The environmental quality of an open air asbestos mine was evaluated over a long period of time by measuring and monitoring the concentration of asbestos fibres in air, soil and water. Air measurements were made to determine the concentration of asbestos fibres in the atmospheric air of the mine, the depositions and the nearby villages. The asbestos fibre concentration was also specified inside the building facilities of MABE. Analyses of soil, dust and water samples were carried out showing the presence of enormous quantities of chrysotile asbestos. The concentration of asbestos fibres in the atmospheric air was compared to older measurements that were taken at the same sampling points during the operation of the mine. The results of this work, in conjunction with individual researches that have been carried out in the past and with the evaluation of international standards of scientific and experience-based findings, provide a reliable framework with which to estimate the threat of MABE to its surrounding environment, and help to determine a basic criterion for the remediation and rehabilitation of the region. In addition, mathematical models based on human and animal studies were used to estimate the probability of a person developing cancer from breathing air containing asbestos fibres in the wider vicinity of the mine in order to define appropriate procedures for evaluating asbestos-related risk.

  5. [Croatian and international regulations on the protection and rights of workers exposed to asbestos at work].

    Science.gov (United States)

    Zavalić, Marija; Macan, Jelena

    2009-11-01

    New regulations on the protection and rights of workers occupationally exposed to asbestos were introduced in Croatia in 2007 and 2008. They have been harmonised with the European Union (EU) and International Labour Organization (ILO) regulations, and make a step forward in safety at work, health protection, social rights, and pension schemes for Croatian workers occupationally exposed to asbestos. The 2007 Croatian regulation on the protection of workers from the risks related to exposure to asbestos at work defines and describes activities in which workers can be occupationally exposed to asbestos, defines the threshold value of asbestos in the air at work, defines valid methods for measurement of asbestos concentrations in the air, and establishes measures to reduce asbestos exposure at work or protect the exposed workers. Croatian law regulating obligatory health surveillance of workers occupationally exposed to asbestos from year 2007 defines activities and competent authorities to implement health surveillance of workers occupationally exposed to asbestos and to diagnose occupational diseases related to asbestos. This law also defines "occupational exposure to asbestos", and "occupational asbestos-related diseases", including asbestosis (pulmonary asbestos-related fibrosis), pleural asbestos-related disorders (plaques, pleural thickening, and benign effusion), lung and bronchial cancer, and malignant mesothelioma of serous membranes. These regulations have been harmonised with ILO, Directive 2003/18/EC amending Council Directive 83/477/EEC on the protection of workers from the risks related to exposure to asbestos at work, and with the Commission Recommendation 2003/670/EC concerning the European schedule of occupational diseases. The 2008 Croatian regulation on conditions of health surveillance, diagnostic procedures and criteria for confirmation of occupational asbestos-related diseases "defines the terms and the content of medical examination of workers

  6. Logistic Problem Connected with Removing Asbestos as Dangerous Waste from Terrains of Country Communes

    Science.gov (United States)

    Parkitny, Waldemar; Wojcik, Weronika; Generowicz, Agnieszka

    2017-12-01

    Asbestos is a common term referring to certain mineral groups having the form of fibers with a length to fibre diameter of at least 100: 1. The specific properties of asbestos - flammability, mechanical strength and thermal and flexibility - meant that asbestos has been widely used in various types of industrial technologies. It is classified as hazardous waste and therefore requires special methods for collection, export and disposal. The article proposes a model of logistics exports of asbestos from selected villages, in order to guarantee the shortest route, while maintaining the ecological safety and the rules of transportation of hazardous waste.

  7. A Management Guide to Asbestos: Medico-Legal, Regulatory, and Hazard Abatement Considerations

    Science.gov (United States)

    1986-08-01

    of the medical hazards of asbestos exposure. Essentially, plaintiffs suffer from a failure of the courts to apply the doctrine of collateral estoppel ...93-114. Brennan, Troyen A, "Collateral Estoppel in Asbestos Litigation." Environmental Law 14 (1983): 197-222. Brodeur, Paul. ’The Asbestos

  8. Defining asbestos: differences between the built and natural environments.

    Science.gov (United States)

    Gunter, Mickey E

    2010-01-01

    Asbestos - while most think they know what this material is, few understand the current issues surrounding it. Few would also realize that asbestos is the form of a mineral, and even fewer would know that there are different types of asbestos, that not only had different industrial applications, but pose differing health risks when inhaled. Asbestos was in wide-spread use mid-last century in many consumer products, and no doubt saved thousands of lives, but by the latter part of last century concerns over its health risk caused its use to wane, to the point it was removed from many buildings. So in many ways the asbestos story was coming to an end in the 1990s, but two events in the USA - the vermiculite ore produced from Libby, Montana which contained amphibole asbestos and was used in a million homes in the USA as attic insulation and the concern for exposure to asbestos occurring in its natural setting in El Dorado Hills, California led to an increased concern of the potential for low-level environmental exposure to asbestos to the general public. The current dilemma we find ourselves in, especially in the USA, deals with the relationships between our knowledge of handling asbestos and an understanding of its risk potential in the built environment versus the natural environment. And one perfect metaphor for this is the term used by many non-geologists to differentiate asbestos in the built vs natural environment - 'naturally occurring asbestos'. Clearly a misstatement, but only one of many we must deal with as we struggle to understand the risk to humans of natural occurrences of asbestos. This paper will try and address some of these issues centering around those occurring in the USA.

  9. Eradicating asbestos one click at a time

    International Nuclear Information System (INIS)

    Ong, Jacqueline

    2014-01-01

    Full text: Two technology firms have launched asbestos tracking software, making bold claims that their programs will help rid Australia of asbestos by 2030. The move follows closely on the heels of the establishment of the Australian Asbestos Safety Eradication Agency (ASEA) last July. Asbestos-related deaths from diseases including lung cancer, asbestosis and mesothelioma are expected to continue until at least 2060, due to a latency period of 20-50 years before symptoms appear after initial exposure. Health experts predict there will be up to 40,000 deaths by 2020. Industry players, governments and trade unions are rightly concerned and have been working towards tracking and disposing of asbestos safely. In fact, just three weeks after ASEA began operations, then-Workplace Relations Minister Bill Shorten announced an additional $6.4 million in funding to implement the agency's national strategic plan for asbestos awareness and management. Now, two firms say they can fulfil the government's goal of eradicating asbestos by 2030 through the use of technology, while saving millions of dollars in the process. After three years of development, Octfolio, owned by investment firm Tulla Group, launched its Asbestos Management Software last September. It maps and manages asbestos by creating a centrally operated database bringing together asbestos stakeholders such as site assessors, removal workers, building owners and government agencies. Information from each stakeholder is recorded in a microformat — codes used to identify specific kinds of data in webpages — which is then processed to give users a big picture view of what is happening at asbestos-contaminated sites and buildings, as well as ongoing removal, disposal and storage of the material. The software also automatically generates reports from auditors who have submitted their inspection reports of asbestos-affected sites, which Octfoliosays will reduce the costs of auditing exercises by up to 75%. Managing

  10. Respiratory health effects of man-made vitreous (mineral) fibres.

    Science.gov (United States)

    De Vuyst, P; Dumortier, P; Swaen, G M; Pairon, J C; Brochard, P

    1995-12-01

    The group of man-made mineral or vitreous fibres (MMMFs or MMVFs) includes glass wool, rock wool, slag wool, glass filaments and microfibres, and refractory ceramic fibres (RCFs). Experimental observations have provided evidence that some types of MMVF are bioactive under certain conditions. The critical role of size parameters has been demonstrated in cellular and animal experiments, when intact fibres are in direct contact with the target cells. It is, however, difficult to extrapolate the results from these studies to humans since they bypass inhalation, deposition, clearance and translocation mechanisms. Inhalation studies are more realistic, but show differences between animal species regarding their sensibility to tumour induction by fibres. Fibre biopersistence is an important factor, as suggested by recent inhalation studies, which demonstrate positive results with RCF for fibrosis, lung tumours and mesothelioma. There is no firm evidence that exposure to glass-, rock- and slag wool is associated with lung fibrosis, pleural lesions, or nonspecific respiratory disease in humans. Exposure to RCF could enhance the effects of smoking in causing airways obstruction. An elevated standard mortality ratio for lung cancer has been demonstrated in cohorts of workers exposed to MMVF, especially in the early technological phase of mineral (rock slag) wool production. During that period, several carcinogenic agents (arsenic, asbestos, polycyclic aromatic hydrocarbons (PAH)) were also present at the workplace and quantitative data about smoking and fibre levels are lacking. It is not possible from these data to determine whether the risk of lung cancer is due to the MMVFs themselves. No increased risk of mesothelioma has been demonstrated in the cohorts of workers exposed to glass-, slag- or rock wool. There are in fact insufficient epidemiological data available concerning neoplastic diseases in RCF production workers because of the small size of the workforce and the

  11. Gallium scanning in differentiating malignant from benign asbestos-related pleural disease

    International Nuclear Information System (INIS)

    Teirstein, A.S.; Chahinian, P.; Goldsmith, S.J.; Sorek, M.

    1986-01-01

    In order to assess the utility of 67gallium citrate in delineating malignant pleural mesothelioma from benign asbestos-related pleural disease, 49 patients with malignant mesothelioma and 16 with benign asbestos-related pleural disease were studied. Seven patients with malignant mesothelioma had no history of asbestos exposure, while the remaining 58 patients were exposed. Forty-three of the 49 patients (88%) with malignant mesothelioma had a positive 67gallium scan including 36 of the 42 (86%) patients with asbestos exposure and all 7 patients without a history of asbestos exposure. Three of 16 patients (19%) with benign asbestos-related pleural disease had a positive scan. 67Gallium radionuclide imaging is nonspecific but may be valuable in noninvasive monitoring of asbestos-exposed populations, which have a high risk for the late development of benign and/or malignant pleural disease

  12. Asbestos and cancer: epidemiological and public health controversies.

    Science.gov (United States)

    Huncharek, M

    1994-01-01

    This paper discusses many of the currently controversial issues surrounding asbestos health effects and their relationship to cancer risk assessment and risk management. The major conclusions reached from this analysis are: (1) All asbestos fiber types are carcinogenic and pose a threat to human health. Therefore, all fiber types should be regulated similarly. (2) The health risks associated with indoor asbestos exposure are uncertain. Available data show that some groups, such as building maintenance personnel (among others), may contract asbestos-related diseases secondary to indoor exposure. Clearly, additional research is needed to accurately determine the extent and nature of disease risk under these conditions. (3) Controlled use has proved an elusive goal. Limited information from underdeveloped countries parallels the experience of Western industrialized nations. Efforts by the Canadian government to establish markets for asbestos in these areas should be opposed. (4) Finally, asbestos-related cancer risk is no longer confined to asbestos industry workers. Asbestos-related mesothelioma has been documented in a wide variety of occupational and nonoccupational settings, highlighting the need for continued surveillance to minimize potential health risks.

  13. [Pulmonary disease due to asbestos in steel industry workers].

    Science.gov (United States)

    Zurbriggen, Rita; Capone, Lilian

    2013-01-01

    Asbestos-related diseases are caused by the inhalation of asbestos fibers in their variety chrysotile or white asbestos. Although the ban in Argentina dates from 2003, there are numerous industries where work continues with this mineral, including iron and steel industries. It is currently known the high pathogenicity of this material, so that in many countries there are programs to monitoring the exposed workers. Here we describe the general characteristics and pulmonary manifestations in 27 patients who had worked in a very huge steel factory in South America. The diagnosis of asbestos-related diseases was made by a medical-occupational record, history of asbestos exposure, additional studies of lung function and chest images. Then the sources of exposure (occupational, domestic and environmental), exposure time and latency period were analyzed, in those patients in whom a related disease was detected. Smoking history was also taken into account. Twenty-two patients had benigns pathologies (81.4%), sixteen of them with lesions localyzed in pleura, and other six pulmonary asbestosis. The malignant pathologies occurred in five patients (18.5%), in four of them mesothelioma and in other one lung cancer. The problem of asbestos exposure has contemporary relevance. Hence the need for a surveillance program in workers exposed to asbestos in the past or currently, to detect, report, record and investigate the characteristics of these pathologies.

  14. 30 CFR 71.702 - Asbestos standard.

    Science.gov (United States)

    2010-07-01

    ...-diameter ratio of at least 3-to-1. (b) Permissible Exposure Limits (PELs)—(1) Full-shift limit. A miner's... concentration of 0.1 fiber per cubic centimeter of air (f/cc). (2) Excursion limit. No miner shall be exposed at...) as averaged over a sampling period of 30 minutes. (c) Measurement of airborne asbestos fiber...

  15. Influence of high-energy milling on structure and microstructure of asbestos-cement materials

    Science.gov (United States)

    Iwaszko, Józef; Zawada, Anna; Lubas, Małgorzata

    2018-03-01

    Asbestos-Containing Waste (ACW) in the form of a fragment from an asbestos-cement board was subjected to high-energy milling in a planetary mill at a constant rotational speed of 650 rpm and for variable milling times: 1, 2, and 3 h. The initial and the milled materials were subjected to infrared spectroscopic examination to identify the asbestos variety and to evaluate changes in the structure caused by high-energy milling. FT-IR (Fourier Transform Infrared Spectroscopy) examinations followed optical microscopy and SEM (Scanning Electron Microscopy) studies as well as X-ray analysis of the phase composition. It was found that the asbestos fibres present in the asbestos-cement board were respirable fibres with pathogenic properties. Identifying asbestos using the spectroscopic method showed that chrysotile asbestos was present in the as-received ACW while no characteristics of absorption bands from crocidolite or amosite were found. The results of the spectroscopic examinations were confirmed by the X-ray phase analysis. During SEM investigations of the milled ACW, complete loss of the fibrous structure of chrysotile was observed. The FT-IR examinations of the milled material showed that with an increased milling time, the characteristic absorption bands characteristic for chrysotile diminished and already after 2 h of milling their almost complete decay was observed. Thereby, it was confirmed that high-energy milling results in destruction of the crystalline structure of the asbestos phase. The conducted studies have shown that the treatment of asbestos-cement materials using high-energy milling is an effective method for asbestos disposal, capable of competing with other technologies and solutions. Moreover, FT-IR spectroscopy was found to be useful to identify asbestos phases and to assess changes caused by high-energy milling.

  16. Transnational Dynamics Amid Poor Regulations: Taiwan’s Asbestos Ban Actions and Experiences

    Directory of Open Access Journals (Sweden)

    Harry Yi-Jui Wu

    2017-10-01

    Full Text Available This article describes the history of the asbestos use regulation process in Taiwan and the associated factors leading to its total ban in 2018. Despite the long history of asbestos mining and manufacturing since the Japanese colonial period, attempts to understand the impact of asbestos on the health of the population and to control its use did not emerge until the early 1980s. We attempted to investigate the driving forces and obstructions involved in asbestos regulations by reviewing available public sources and scientific journal articles and conducting interviews with key propagators of the asbestos regulation and ban. Correlation between asbestos exposure and asbestos-related diseases has already been established; however, authorities have been unable to effectively regulate the extensive application of asbestos in various light industries that support economic growth since the 1960s. More stringent regulations on asbestos use in industries and an eventual ban were caused indirectly by appeals made by visionary scholars and healthcare professionals but also due to the subsidence of asbestos-related industries. With the elucidation of factors that affect asbestos regulation and ban, a thorough long-term healthcare plan for the neglected victims of asbestos-related diseases and upstream measures for policy change must be developed.

  17. UK asbestos imports and mortality due to idiopathic pulmonary fibrosis.

    Science.gov (United States)

    Barber, C M; Wiggans, R E; Young, C; Fishwick, D

    2016-03-01

    Previous studies have demonstrated that the rising mortality due to mesothelioma and asbestosis can be predicted from historic asbestos usage. Mortality due to idiopathic pulmonary fibrosis (IPF) is also rising, without any apparent explanation. To compare mortality due to these conditions and examine the relationship between mortality and national asbestos imports. Mortality data for IPF and asbestosis in England and Wales were available from the Office for National Statistics. Data for mesothelioma deaths in England and Wales and historic UK asbestos import data were available from the Health & Safety Executive. The numbers of annual deaths due to each condition were plotted separately by gender, against UK asbestos imports 48 years earlier. Linear regression models were constructed. For mesothelioma and IPF, there was a significant linear relationship between the number of male and female deaths each year and historic UK asbestos imports. For asbestosis mortality, a similar relationship was found for male but not female deaths. The annual numbers of deaths due to asbestosis in both sexes were lower than for IPF and mesothelioma. The strength of the association between IPF mortality and historic asbestos imports was similar to that seen in an established asbestos-related disease, i.e. mesothelioma. This finding could in part be explained by diagnostic difficulties in separating asbestosis from IPF and highlights the need for a more accurate method of assessing lifetime occupational asbestos exposure. © Crown copyright 2015.

  18. Allegheny County Asbestos Permits

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Current asbestos permit data issued by the County for commercial building demolitions and renovations as required by the EPA. This file is updated daily and can be...

  19. Asbestos and its diseases

    National Research Council Canada - National Science Library

    Gibbs, A. R; Craighead, John E

    2008-01-01

    ... Chapter 8. Malignant Diseases of the Pleura, Peritoneum, and Other Serosal Surfaces Allen R. Gibbs and John E. Craighead 190 Chapter 9. Nonthoracic Cancers Possibly Resulting from Asbestos Exposu...

  20. Asbestos Ban in Italy: A Major Milestone, Not the Final Cut

    Directory of Open Access Journals (Sweden)

    Daniela Marsili

    2017-11-01

    Full Text Available Background and history: Italy was the main asbestos producer and one of the greatest consumers in 20th century Europe until the asbestos ban was introduced in 1992. Asbestos exposure affected the population in a wide range of working environments, namely mining and marketing of asbestos, asbestos cement production, shipyards and textile industries. This also determined a widespread environmental asbestos exposure affecting the surrounding communities. Methods: To investigate the drivers and difficulties of the process leading to the asbestos ban and its subsequent implementation, we focused on stakeholder involvement, environmental health policies, capacity building and communication. Results: In the past three decades, stakeholder involvement has been instrumental in advancing the industrial asbestos replacement process, prevention and remediation interventions. Furthermore, involvement also contributed to the integration of environmental and health policies at national, regional and local levels, including capacity building and communication. In a global public health perspective, international scientific cooperation has been established with countries using and producing asbestos. Discussion and Conclusions: Key factors and lessons learnt in Italy from both successful and ineffective asbestos policies are described to support the relevant stakeholders in countries still using asbestos contributing to the termination of its use.

  1. Health risk among asbestos cement sheet manufacturing workers in Thailand.

    Science.gov (United States)

    Phanprasit, Wantanee; Sujirarat, Dusit; Chaikittiporn, Chalermchai

    2009-12-01

    To assess asbestos exposure and calculate the relative risks of lung cancer among asbestos cement roof sheet workers and to predict the incidence rate of lung cancer caused by asbestos in Thailand. A cross-sectional study was conducted in four asbestos cement roof factories. Both area and personal air samples were collected and analyzed employing NIOSH method # 7400 and counting rule A for all procesess and activities. The time weight average exposures were calculated for each studied task using average area concentrations of the mill and personal concentrations. Then, cumulative exposures were estimated based on the past nation-wide air sampling concentrations and those from the present study. The relative risk (RR) of lung cancer among asbestos cement sheet workers was calculated and the number of asbestos related lung cancer case was estimated. The roof fitting polishers had the highest exposure to airborne asbestos fiber (0.73 fiber/ml). The highest average area concentration was at the conveyor to the de-bagger areas (0.02 fiber/ml). The estimated cumulative exposure for the workers performed studied-tasks ranged in between 90.13-115.65 fiber-years/ml while the relative risk of lung cancer calculated using US. EPA's model were 5.37-5.96. Based on the obtained RR, lung cancer among AC sheet in Thailand would be 2 case/year. In case that AC sheet will not be prohibited from being manufactured, even though only chrysotile is allowed, the surveillance system should be further developed and more seriously implemented. The better control measures for all processes must be implemented. Furthermore, due to the environmental persistence of asbestos fiber, its life cycle analysis should be conducted in order to control environmental exposure of general population.

  2. Asbestos and Gastrointestinal Cancer: A Review of the Literature

    OpenAIRE

    Morgan, Robert W.; Foliart, Donna E.; Wong, Otto

    1985-01-01

    Exposure to asbestos is among several factors cited as possible causes of esophageal, gastric and colorectal cancer. More than 45 published studies have presented mortality data on asbestos-exposed workers. For each cohort, we listed the observed and expected rates of deaths from types of gastrointestinal cancer based on the latest published follow-up. Summary standardized mortality ratios (SMRs) were then derived. Finally, we calculated summary SMRs for total gastrointestinal tract cancer fo...

  3. Asbestos in cooling-tower waters. Final report

    International Nuclear Information System (INIS)

    Lewis, B.A.G.

    1979-03-01

    Water discharges from cooling towers constructed with asbestos fill were found to contain chrysotile--asbestos fibers at concentrations as high as 10 8 fibers/liter. The major source of these fibers, appears to be the components of the towers rather than the air drawn through the towers or the makeup water taken into the towers. Suggested mechanisms for the release of chrysotile fibers from cooling-tower fill include freeze-thaw cycles and dissolution of the cement due to acidic components of the circulating water. Ash- or other material-settling ponds were found to reduce asbestos-fiber concentrations in cooling-tower effluent. The literature reviewed did not support the case for a causal relationship between adverse human health effects and drinking water containing on the order of 10 6 chrysotile--asbestos fibers/liter; for this and other reasons, it is not presently suggested that the use of asbestos fill be discontinued. However, caution and surveillance are dictated by the uncertainties in the epidemiological studies, the absence of evidence for a safe threshold concentration in water, and the conclusive evidence for adverse effects from occupational exposure. It is recommended that monitoring programs be carried out at sites where asbestos fill is used; data from such programs can be used to determine whether any mitigative measures should be taken. On the basis of estimates made in this study, monitoring for asbestos in drift from cooling towers does not appear to be warranted

  4. Preventive measures to eliminate asbestos-related diseases in singapore.

    Science.gov (United States)

    Lim, John Wah; Koh, David; Khim, Judy Sng Gek; Le, Giang Vinh; Takahashi, Ken

    2011-09-01

    The incidence of asbestos-related diseases (ARD) has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman's Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.

  5. Preventive Measures to Eliminate Asbestos-Related Diseases in Singapore

    Directory of Open Access Journals (Sweden)

    John Wah Lim

    2011-09-01

    Full Text Available The incidence of asbestos-related diseases (ARD has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman’s Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.

  6. Porcelain Factory Worker With Asbestos-related Mesothelioma

    Directory of Open Access Journals (Sweden)

    Meng-Ting Tsou

    2009-10-01

    Full Text Available Malignant mesothelioma is a rare tumor among the general population, but for people exposed to asbestos, the lifetime risk is high. A 58-year old man presented with suffering from chest pain, upper back pain, shortness of breath, and coughing that had continued for several months. A chest X-ray revealed right-side pleural effusion; however, pleural biopsy from drainage treatment confirmed a diagnosis of malignant mesothelioma. According to his occupational and environmental history, the patient had worked continuously in a porcelain factory for 30 years. The specific characteristics of his work, making asbestos wallboards and gaskets, entailed working in high-temperature conditions with a high fine-particle content in the atmosphere. The high working temperature caused asbestos debris and dust to fall down regularly from the wallboards, however, it was not until recently that the patient had started to wear personal protection. Asbestos is a significant source of hazardous exposure in old buildings, and this case serves as a reminder of the importance of asbestos-related exposure history, which facilitated the correct diagnosis of pulmonary malignant mesothelioma. Asbestos-containing materials that are now banned or regulated are still present in older buildings and remain an exposure hazard; they continue to be a serious health concern in many countries.

  7. Asbestos: a perspective. I. An overview. II. An annotated literature collection, 1960--1974. III. A literature compilation, 1974--1977. [Health hazards

    Energy Technology Data Exchange (ETDEWEB)

    Huff, J.E.; Hammons, A.S.; Dinger, C.Y.; Kline, B.W.; Whitfield, B.L.; Black, S.A.

    1978-03-01

    Although the general population is widely exposed to asbestos, both by inhalation and ingestion, the hazards of chronic, environmental exposure have not been determined. Reasons conflict but are attributed in part to a paucity of information on human dose response, effects of asbestos ingestion, ambient concentrations and distribution of asbestos in the environment, the environmental cycling of asbestos, and related biological interactions including transmission through foodchains. As distilled from the world's asbestos literature, conclusions representing a majority opinion on the pathological effects of asbestos on man are summarized. (38 references.)

  8. Radiation pneumonitis in a patient exposed to asbestos

    International Nuclear Information System (INIS)

    Ashford, R.F.U.; Maher, J.; Drury, A.; Pickering, D.

    1981-01-01

    A case report is presented of a 58 year old man who had for many years run an asbestos importing and fibreizing plant. He developed radiation pneumonitis following radiotherapy to a squamous cell carcinoma of the middle 3rd of the oesophagus. Detailed lung studies at autopsy revealed asbestos bodies associated with macrophages in many alveoli and areas of subpleural fibrosis typical of asbestos exposure. This was the most florid case of radiation seen in the Westminster Hospital for some years and the first seen in patients treated for carcinoma of the oesophagus using a three field technique. It is suggested that when planning radiotherapy to an asbestos-exposed patient, a possible increase in lung sensitivity to radiation should be considered when planning dosage. (U.K.)

  9. The extent and influence of Asbestos Safety Awareness training among managers who had previously commissioned an asbestos survey in their workplace buildings.

    Science.gov (United States)

    Hickey, Jane; Saunders, Jean; Davern, Peter

    2015-01-01

    A telephone survey was conducted among a sample of managers (n=30) in Ireland who had previously commissioned an asbestos survey in their workplace buildings. The aims of the telephone survey were to examine the extent to which managers had completed Asbestos Safety Awareness (ASA) training, and to assess how such training might influence (i) their instinctive thoughts on asbestos, and (ii) their approach to aspects of asbestos management within their buildings. Managers' motivations for commissioning the asbestos survey were also identified. The study found that ASA-trained managers (n=11) were not significantly more likely to work in larger organisations or in organisations which operated an accredited management system. Though ASA-trained managers' instinctive thoughts on asbestos were of a slightly poorer technical quality compared with those of non-ASA-trained managers, they were still significantly more cognisant of their responsibilities towards those of their employees at specific risk of asbestos exposure. Most managers (n=28) commissioned the asbestos survey to satisfy a pre-requisite of external contractors for commencing refurbishment/demolition work in their buildings. Given its potential to positively influence the occupational management of asbestos, the authors recommend the general promotion of suitably tailored ASA-training programmes among building managers and external contractors alike.

  10. Occupational characteristics of cases with asbestos-related diseases in The Netherlands

    NARCIS (Netherlands)

    A. Burdorf (Alex); M. Dahhan; P. Swuste (Paul)

    2003-01-01

    textabstractOBJECTIVE: To describe the occupational background of cases with an asbestos-related disease and to present overall mesothelioma risks across industries with historical exposure to asbestos. METHODS: For the period 1990-2000, cases were collected from records held by

  11. Exosomes from asbestos-exposed cells modulate gene expression in mesothelial cells.

    Science.gov (United States)

    Munson, Phillip; Lam, Ying-Wai; Dragon, Julie; MacPherson, Maximilian; Shukla, Arti

    2018-03-19

    Asbestos exposure is a determinate cause of many diseases, such as mesothelioma, fibrosis, and lung cancer, and poses a major human health hazard. At this time, there are no identified biomarkers to demarcate asbestos exposure before the presentation of disease and symptoms, and there is only limited understanding of the underlying biology that governs asbestos-induced disease. In our study, we used exosomes, 30-140 nm extracellular vesicles, to gain insight into these knowledge gaps. As inhaled asbestos is first encountered by lung epithelial cells and macrophages, we hypothesize that asbestos-exposed cells secrete exosomes with signature proteomic cargo that can alter the gene expression of mesothelial cells, contributing to disease outcomes like mesothelioma. In the present study using lung epithelial cells (BEAS2B) and macrophages (THP-1), we first show that asbestos exposure causes changes in abundance of some proteins in the exosomes secreted from these cells. Furthermore, exposure of human mesothelial cells (HPM3) to these exosomes resulted in gene expression changes related to epithelial-to-mesenchymal transition and other cancer-related genes. This is the first report to indicate that asbestos-exposed cells secrete exosomes with differentially abundant proteins and that those exosomes have a gene-altering effect on mesothelial cells.-Munson, P., Lam, Y.-W., Dragon, J. MacPherson, M., Shukla, A. Exosomes from asbestos-exposed cells modulate gene expression in mesothelial cells.

  12. Infectious disease risk in asbestos abatement workers.

    Science.gov (United States)

    Lange, John H; Mastrangelo, Giuseppe; Cegolon, Luca

    2012-08-16

    The current literature reports increased infectious disease occurrence in various construction occupations, as an important contributor to morbidity and mortality arising from employment.These observations should be expanded to asbestos abatement workers, as the abatement can create an environment favorable for bacterial, viral and fungal infections. Asbestos abatement work employs activities resulting in cuts, blisters and abrasions to the skin, work in a dirty environment and exposure to dust, mists and fumes.Furthermore, this population exhibits a high smoking rate which increases the risk of chronic obstructive pulmonary disease and respiratory infections.In addition, these workers also commonly employ respirators, which can accumulate dirt and debris magnifying exposure to microbes. Use of respirators and related types of personal protective equipment, especially if shared and in the close environment experienced by workers, may enhance communicability of these agents, including viruses. Abatement workers need to be provided with information on hazards and targeted by appropriate health education to reduce the infection risk. Epidemiological studies to investigate this risk in asbestos removers are recommended.

  13. Clinical Investigation of Benign Asbestos Pleural Effusion

    Directory of Open Access Journals (Sweden)

    Nobukazu Fujimoto

    2015-01-01

    Full Text Available There is no detailed information about benign asbestos pleural effusion (BAPE. The aim of the study was to clarify the clinical features of BAPE. The criteria of enrolled patients were as follows: (1 history of asbestos exposure; (2 presence of pleural effusion determined by chest X-ray, CT, and thoracentesis; and (3 the absence of other causes of effusion. Clinical information was retrospectively analysed and the radiological images were reviewed. There were 110 BAPE patients between 1991 and 2012. All were males and the median age at diagnosis was 74 years. The median duration of asbestos exposure and period of latency for disease onset of BAPE were 31 and 48 years, respectively. Mean values of hyaluronic acid, adenosine deaminase, and carcinoembryonic antigen in the pleural fluid were 39,840 ng/mL, 23.9 IU/L, and 1.8 ng/mL, respectively. Pleural plaques were detected in 98 cases (89.1%. Asbestosis was present in 6 (5.5% cases, rounded atelectasis was detected in 41 (37.3% cases, and diffuse pleural thickening (DPT was detected in 30 (27.3% cases. One case developed lung cancer (LC before and after BAPE. None of the cases developed malignant pleural mesothelioma (MPM during the follow-up.

  14. Experimental asbestos studies in the UK: 1912-1950.

    Science.gov (United States)

    Greenberg, Morris

    2017-11-01

    The asbestos industry originated in the UK in the 1870s. By 1898, asbestos had many applications and was reported to be one of the four leading causes of severe occupational disease. In 1912, the UK government sponsored an experimental study that reported that exposure to asbestos produced no more than a modicum of pulmonary fibrosis in guinea pigs. In the 1930s, the newly established Medical Research Council, with assistance from industry, sponsored a study of the effects of exposing animals to asbestos by injection (intratracheal and subcutaneous) and by inhalation in the factory environment. Government reports, publications, and contemporary records obtained by legal discovery have been reviewed in the context of the stage of scientific development and the history of the times. Experimenters were engaged in a learning process during the 1912-1950 period, and their reports of the effects of asbestos were inconsistent. Pathologists who studied the effects of asbestos experimentally, at whole animal, tissue and cellular levels, advanced experimental methodology and mechanistic knowledge. In the hands of public relations experts, however, research was exploited to preserve an industry and perpetuate preventable diseases, a practice that continues to this day. © 2017 Wiley Periodicals, Inc.

  15. Fibre tracking

    International Nuclear Information System (INIS)

    Gaillard, J.M.

    1994-03-01

    A large-size scintillating plastic fibre tracking detector was built as part of the upgrade of the UA2 central detector at the SPS proton-antiproton collider. The cylindrical fibre detector of average radius of 40 cm consisted of 60000 plastic fibres with an active length of 2.1 m. One of the main motivations was to improve the electron identification. The fibre ends were bunched to be coupled to read-out systems of image intensifier plus CCD, 32 in total. The quality and the reliability of the UA2 fibre detector performance exceeded expectations throughout its years of operation. A few examples of the use of image intensifiers and of scintillating fibres in biological instrumentation are described. (R.P.) 11 refs., 15 figs., 2 tabs

  16. Use of asbestos building materials in Malaysia: legislative measures, the management, and recommendations for a ban on use.

    Science.gov (United States)

    Safitri Zen, Irina; Ahamad, Rahmalan; Gopal Rampal, Krishna; Omar, Wahid

    2013-01-01

    Malaysia has partially banned the use of asbestos. The prohibition of asbestos building materials in schools, clinics, and hospitals built by government started in 1999. Since 2005, prohibition has also been applied to all government buildings. However, asbestos construction materials such as roof and ceiling tiles are still sold in the market. There are no acts or regulations prohibiting the use of asbestos in private buildings in Malaysia. Asbestos was first used for industrial purposes in Malaysia in the 1960s and the first regulations related to asbestos have been around since the 1980s. Non-governmental organizations have been pushing the government to impose a total ban since the 1980s. Asbestos is still used in the manufacturing sector under the "control use" concept. The study found difficulties in established and validated medical record data on asbestos-related diseases. This paper reviews existing asbestos-related regulations and guidelines in Malaysia and discusses the urgency for a total ban in the use of asbestos in building materials in the country. In the meanwhile, stricter enforcement of occupational safety and health regulations related to the use and exposure of asbestos among workers in the manufacturing, construction, maintenance, and demolition sectors has been in place.

  17. Releasability of asbestos fibers from weathered roof cement.

    Science.gov (United States)

    Oberta, Andrew F; Poye, Lee; Compton, Steven P

    2018-03-26

    Chrysotile asbestos fibers were added to roofing products, including roof cement, for several decades. The fibers were described as "encapsulated" and therefore incapable of being released, an assertion that is disproved by the study reported herein. Three test panels of roof cement from the original container were exposed to ambient weathering in 2015 and 2016. Two panels were then sampled using the ASTM D5755 microvacuum method. Sampling revealed a light brown sub-layer under the dark brown surface layer, both of which crumbled and became friable during sampling. Analysis of the microvacuum samples with transmission electron microscopy showed that the material on the two panels contained 4,432,000 and 3,320,000 asbestos structures per cm² with nearly all of the structures consisting of fibers less than 5 µm long. Energy dispersive spectrometry determined that none of the fibers reported were coated with asphalt. The presence of free fibers were confirmed by direct examination of the surfaces of the panels and of dust released from handling the panels via scanning electron microscopy. This study confirmed the releasability of uncoated asbestos fibers from dried roof cement that was indicated in two previous studies published in 2007 and 2010. These results suggest that the finding of the 5th Circuit Court in 1997 that uncoated airborne asbestos fibers cannot be released from roof cement, and therefore do not present a potential exposure by inhalation, was erroneous in retrospect. Theexemption of roof cement from regulation under the Occupational Safety and Health Administration Construction Industry Standard for asbestos by the Court should not be relied on by employers of workers who remove weathered asbestos-containing roof cement, and precautions should be taken against exposure to airborne asbestos fibers during this work.

  18. Anxious and depressive symptoms in the French Asbestos-Related Diseases Cohort: risk factors and self-perception of risk.

    Science.gov (United States)

    Mounchetrou Njoya, Ibrahim; Paris, Christophe; Dinet, Jerome; Luc, Amandine; Lighezzolo-Alnot, Joelle; Pairon, Jean-Claude; Thaon, Isabelle

    2017-04-01

    Asbestos is known to be an independent risk factor for lung and pleural cancers. However, to date, little attention has been paid to the psychological effects of asbestos exposure among exposed subjects. The objectives of this study were to estimate the prevalence of anxious and depressive symptoms among >2000 French participants of the Asbestos-Related Diseases Cohort (ARDCO), 6 years after their inclusion, to identify the risk factors associated with those anxious and depressive symptoms and to evaluate the impact of the asbestos-risk perception. The ARDCO was constituted in four regions of France between October 2003 and December 2005, by including former asbestos workers. Between 2011 and 2012, participants of the ARDCO program were invited to undergo another chest CT scan 6 years after the previous scan. Participants were asked to complete questionnaires including asbestos exposure assessment, Hospital Anxiety and Depression Scale (HADS), asbestos-risk perception and self-perception of asbestos-related diseases. Among the 2225 participants, 2210 fully completed questionnaires were collected and analyzed. The prevalence of symptoms of probable anxiety and probable depression was 19.7% and 9.9%, respectively. The risk of anxious and depressive symptoms was independently associated with self-perception of the intensity of asbestos exposure, asbestos-risk perception and self-perception of asbestos-related diseases. The results obtained in this large study confirm that previously asbestos-exposed subjects are likely to develop anxious and depressive symptoms. Finally, implications related to the prevention of anxiety and depression among asbestos-exposed workers is discussed. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  19. Why asbestos should be banned

    NARCIS (Netherlands)

    Cremers, J.

    2013-01-01

    There has been an outburst of public anger after the ‘discovery’ of asbestos polluted social housing, despite there being several other topical asbestos related incidents. This coupled with the spectacular Turin trial against some captains of industry who were sentenced for knowingly exposing their

  20. Asbestos manufacturing plants in Poland

    Directory of Open Access Journals (Sweden)

    Wilk Ewa

    2014-06-01

    Full Text Available The unique set of physical and chemical properties of asbestos has led to its many industrial applications, such as roof coverings, textiles, rope, cord and yarn, paper, friction and composition materials, household product, acid-resistant filters, packing, insulation, and certain types of lagging, amongst others. In Poland asbestos-containing products were manufactured from raw materials imported mainly from the former Soviet Union, with production launched at the beginning of 20th century. According to Annex 4 to the Act of 19 June 1997 on the prohibition of the use of asbestos-containing products, there were 28 asbestos manufacturing plants in Poland located in 11 provinces throughout the country. The current survey was undertaken to enable asbestos manufacturing plants to be arranged, described and divided in order to contribute to further surveys.

  1. Legal aspects of workers' health protection against asbestos in Poland in the light of the EU legal framework

    Directory of Open Access Journals (Sweden)

    Beata Świątkowska

    2013-10-01

    Full Text Available Legal protection of human life and health against asbestos dust-related hazards is carried out in various dimensions of the European Union law mainly focused on health protection of employees and responsibilities of employers, as well as on environmental protection. The aim of this paper is to present the Community legal issues emphasizing the protection of workers against asbestos and discuss the current state of Polish law in this regard. An analysis of recent legal solutions provides a comprehensive look at the extensive steps currently taken to reduce the risk of exposure to asbestos dust. The legislation in the European Union, including Poland indicates sound foundations for assuring health and safety of workers still exposed to asbestos and those formerly employed in asbestos processing plants. It is only postulated to unify high standards of healthcare to provide all workers employed in asbestos exposure with equal and particular legal protection. Med Pr 2013;64(5:689–697

  2. The role of social toxicity in responses to a slowly-evolving environmental disaster: the case of amphibole asbestos exposure in Libby, Montana, USA.

    Science.gov (United States)

    Cline, Rebecca J W; Orom, Heather; Chung, Jae Eun; Hernandez, Tanis

    2014-09-01

    Experiencing a disaster has significant negative effects on psychological adjustment. Case study accounts point to two consistent trends in slowly-evolving environmental disasters: (a) patterns of negative social dynamics, and (b) relatively worse psychological outcomes than in natural disasters. Researchers have begun to explicitly postulate that the social consequences of slowly-evolving environmental disasters (e.g., community conflict) have their own effects on victims' psychological outcomes. This study tested a model of the relationship between those social consequences and psychological adjustment of victims of a slowly-evolving environmental disaster, specifically those whose health has been compromised by the amphibole asbestos disaster in Libby, MT. Results indicate that experiencing greater community conflict about the disaster was associated with greater family conflict about the disaster which, in turn, was associated with greater social constraints on talking with others about their disease, both directly and indirectly through experiencing stigmatization. Experiencing greater social constraints was associated with worse psychological adjustment, both directly and indirectly through failed social support. Findings have implications for understanding pathways by which social responses create negative effects on mental health in slowly-evolving environmental disasters. These pathways suggest points for prevention and response (e.g., social support, stigmatization of victims) for communities experiencing slowly-evolving environmental disasters.

  3. Mortality from asbestos-associated disease in Libby, Montana 1979-2011.

    Science.gov (United States)

    Naik, Samantha Lampert; Lewin, Michael; Young, Rand; Dearwent, Steve M; Lee, Robin

    2017-03-01

    Research on asbestos exposure in Libby, MT, has focused on occupational exposure in vermiculite mining and processing, but less attention has been paid to asbestos-related mortality among community members without vermiculite mining occupational history. Our study reports on asbestos-related mortality in Libby over 33 years (1979-2011) while controlling for occupational exposure. We calculated sex-specific 33-year standardized mortality ratios (SMRs) for Libby residents who died from 1979 to 2011 with an asbestos-related cause of death. Decedent address at time of death was geocoded to confirm inclusion in the Libby County Division. We controlled for past W.R. Grace employment by including and then removing them from the SMR analysis. Six hundred and ninety-four decedents were identified as having at least one asbestos-related cause of death and residing in our study area boundary. Statistically significant (Pdiseases, female COPD, and asbestosis for both sexes combined. Eighty-five men and two women were matched to employment records. We observed elevated asbestos-related mortality rates among males and females. SMR results for asbestosis were high for both sexes, even after controlling for past W.R. Grace employment. These results suggest that the general population may be experiencing asbestos-related effects, not just former vermiculite workers. Additional research is needed to determine whether SMRs remain elevated after controlling for secondary exposure, such as living with vermiculite workers.

  4. Pulmonary asbestos body counts and electron probe analysis of asbestos body cores in patients with mesothelioma: a study of 25 cases

    International Nuclear Information System (INIS)

    Roggli, V.L.; McGavran, M.H.; Subach, J.; Sybers, H.D.; Greenberg, S.D.

    1982-01-01

    Malignant mesotheliomas of the pleura and peritoneum are well-recognized risks of asbestos exposure. We determined the asbestos body content of the lungs from 24 cases of malignant mesothelioma (19 pleural, five peritoneal) and compared such to the content of lungs from 50 consecutive adult autopsies and four cases of overt asbestosis using a Clorox-digestion concentration technique. The cores of 90 asbestos bodies were examined by energy dispersive x-ray analysis and compared with similar data from 120 standard asbestos fibers and 20 fiberglass fibers. The malignant mesothelioma patients had asbestos body counts intermediate between those of the general population and those of patients with asbestosis, although some of the mesothelioma cases overlapped with the general population. These latter cases often lacked an identifiable occupational exposure to asbestos. EDXA studies demonstrated an amphibole core in 88 of the 90 asbestos bodies (amosite or crocidolite in 80 of 88, anthophyllite or tremolite in eight of 88), and chrysotile in two instances

  5. Heterogeneity of exposure and attribution of mesothelioma: Trends and strategies in two American counties

    International Nuclear Information System (INIS)

    Case, B W; Abraham, J L

    2009-01-01

    As mesothelioma risk has begun to decline in the United States, two trends are gaining relative importance. 'Legacy' exposures causing this disease are most important in locales having past asbestos industry, shipyards, and/or local distribution of asbestos amphibole-containing material as a result. 'Future' exposures are of particular concern in relation to so-called 'naturally occurring asbestos' (NOA) areas which include unequivocally asbestiform amphibole. In this paper, Jefferson Parish, Louisiana is used as an example of the first trend, and El Dorado County, California as an example of the second. Available tumor registry, epidemiology, historical and mineralogical data, and lung-retained fibre content are used as indicators of disease and exposure. Jefferson Parish, LA was chosen as the prototype of 'legacy' exposures on the basis of historical evidence of asbestos plants with known mesotheliomas in the workforce, known shipyards in the same area, EPA records of distribution of crocidolite-containing scrap to and remediation of over 1400 properties, NIOSH published data on mesothelioma by county, and exposure data including lung-retained fibre analyses in victims, where available. El Dorado, CA was chosen as the prototype of NOA amphibole exposures on the basis of tumor registry data, activity-based EPA sampling data in one area, and lung-retained fibre analyses in area pets, and future risk assessment based on tremolite-specific modelling in Libby, Montana and elsewhere. As expected, the legacy exposure area was high in mesothelioma incidence and mortality. Lung-retained fibre content confirms crocidolite exposures in exposed plant-workers and those exposed to crocidolite-containing scrap, and amosite in shipyard workers. In contrast, to date, cancer registry data in the NOA-amphibole ('future') county does not show a clear increase in incidence or mortality, but grouped county data from the area show a shift in higher incidence rates to the NOA areas and

  6. Heterogeneity of exposure and attribution of mesothelioma: Trends and strategies in two American counties

    Science.gov (United States)

    Case, B. W.; Abraham, J. L.

    2009-02-01

    As mesothelioma risk has begun to decline in the United States, two trends are gaining relative importance. "Legacy" exposures causing this disease are most important in locales having past asbestos industry, shipyards, and/or local distribution of asbestos amphibole-containing material as a result. "Future" exposures are of particular concern in relation to so-called "naturally occurring asbestos" (NOA) areas which include unequivocally asbestiform amphibole. In this paper, Jefferson Parish, Louisiana is used as an example of the first trend, and El Dorado County, California as an example of the second. Available tumor registry, epidemiology, historical and mineralogical data, and lung-retained fibre content are used as indicators of disease and exposure. Jefferson Parish, LA was chosen as the prototype of "legacy" exposures on the basis of historical evidence of asbestos plants with known mesotheliomas in the workforce, known shipyards in the same area, EPA records of distribution of crocidolite-containing scrap to and remediation of over 1400 properties, NIOSH published data on mesothelioma by county, and exposure data including lung-retained fibre analyses in victims, where available. El Dorado, CA was chosen as the prototype of NOA amphibole exposures on the basis of tumor registry data, activity-based EPA sampling data in one area, and lung-retained fibre analyses in area pets, and future risk assessment based on tremolite-specific modelling in Libby, Montana and elsewhere. As expected, the legacy exposure area was high in mesothelioma incidence and mortality. Lung-retained fibre content confirms crocidolite exposures in exposed plant-workers and those exposed to crocidolite-containing scrap, and amosite in shipyard workers. In contrast, to date, cancer registry data in the NOA-amphibole ("future") county does not show a clear increase in incidence or mortality, but grouped county data from the area show a shift in higher incidence rates to the NOA areas and

  7. Heterogeneity of exposure and attribution of mesothelioma: Trends and strategies in two American counties

    Energy Technology Data Exchange (ETDEWEB)

    Case, B W [Department of Pathology and School of Environment, McGill University, Montreal, Quebec (Canada); Abraham, J L, E-mail: bruce.case@mcgill.c [Department of Pathology, SUNY Upstate Medical University, Syracuse, NY 13210 (United States)

    2009-02-01

    As mesothelioma risk has begun to decline in the United States, two trends are gaining relative importance. 'Legacy' exposures causing this disease are most important in locales having past asbestos industry, shipyards, and/or local distribution of asbestos amphibole-containing material as a result. 'Future' exposures are of particular concern in relation to so-called 'naturally occurring asbestos' (NOA) areas which include unequivocally asbestiform amphibole. In this paper, Jefferson Parish, Louisiana is used as an example of the first trend, and El Dorado County, California as an example of the second. Available tumor registry, epidemiology, historical and mineralogical data, and lung-retained fibre content are used as indicators of disease and exposure. Jefferson Parish, LA was chosen as the prototype of 'legacy' exposures on the basis of historical evidence of asbestos plants with known mesotheliomas in the workforce, known shipyards in the same area, EPA records of distribution of crocidolite-containing scrap to and remediation of over 1400 properties, NIOSH published data on mesothelioma by county, and exposure data including lung-retained fibre analyses in victims, where available. El Dorado, CA was chosen as the prototype of NOA amphibole exposures on the basis of tumor registry data, activity-based EPA sampling data in one area, and lung-retained fibre analyses in area pets, and future risk assessment based on tremolite-specific modelling in Libby, Montana and elsewhere. As expected, the legacy exposure area was high in mesothelioma incidence and mortality. Lung-retained fibre content confirms crocidolite exposures in exposed plant-workers and those exposed to crocidolite-containing scrap, and amosite in shipyard workers. In contrast, to date, cancer registry data in the NOA-amphibole ('future') county does not show a clear increase in incidence or mortality, but grouped county data from the area show a

  8. Comparison of soil sampling and analytical methods for asbestos at the Sumas Mountain Asbestos Site-Working towards a toolbox for better assessment.

    Science.gov (United States)

    Wroble, Julie; Frederick, Timothy; Frame, Alicia; Vallero, Daniel

    2017-01-01

    Established soil sampling methods for asbestos are inadequate to support risk assessment and risk-based decision making at Superfund sites due to difficulties in detecting asbestos at low concentrations and difficulty in extrapolating soil concentrations to air concentrations. Environmental Protection Agency (EPA)'s Office of Land and Emergency Management (OLEM) currently recommends the rigorous process of Activity Based Sampling (ABS) to characterize site exposures. The purpose of this study was to compare three soil analytical methods and two soil sampling methods to determine whether one method, or combination of methods, would yield more reliable soil asbestos data than other methods. Samples were collected using both traditional discrete ("grab") samples and incremental sampling methodology (ISM). Analyses were conducted using polarized light microscopy (PLM), transmission electron microscopy (TEM) methods or a combination of these two methods. Data show that the fluidized bed asbestos segregator (FBAS) followed by TEM analysis could detect asbestos at locations that were not detected using other analytical methods; however, this method exhibited high relative standard deviations, indicating the results may be more variable than other soil asbestos methods. The comparison of samples collected using ISM versus discrete techniques for asbestos resulted in no clear conclusions regarding preferred sampling method. However, analytical results for metals clearly showed that measured concentrations in ISM samples were less variable than discrete samples.

  9. Airborne asbestos concentrations associated with heavy equipment brake removal.

    Science.gov (United States)

    Madl, A K; Gaffney, S H; Balzer, J L; Paustenbach, D J

    2009-11-01

    Asbestos-containing brake linings were used in heavy-duty construction equipment such as tractors, backhoes, and bulldozers prior to the 1980s. While several published studies have evaluated exposures to mechanics during brake repair work, most have focused on automobiles and light trucks, not on heavy agricultural or construction vehicles. The purpose of this study is to characterize the airborne concentration of asbestos to workers and bystanders from brake wear debris during brake removal from 12 loader/backhoes and tractors manufactured between 1960 and 1980. Asbestos content in brake lining (average 20% chrysotile by polarized light microscopy) and brake wear debris [average 0.49% chrysotile by transmission electron microscopy (TEM)] was also quantified. Breathing zone samples on the lapel of mechanics (n = 44) and area samples at bystander (n = 34), remote (n = 22), and ambient (n = 12) locations were collected during 12 brake changes and analyzed using phase contrast microscopy (PCM) [National Institute for Occupational Safety and Health (NIOSH) 7400] and TEM (NIOSH 7402). In addition, the fiber distribution by size and morphology was evaluated according to the International Organization for Standardization method for asbestos. Applying the ratio of asbestos fibers:total fibers (including non-asbestos) as determined by TEM to the PCM results, the average airborne chrysotile concentrations (PCM equivalent) were 0.024 f/cc for the mechanic and 0.009 f/cc for persons standing 1.2-3.1 m from the activity during the period of exposure ( approximately 0.5 to 1 h). Considering the time involved in the activity, and assuming three brake jobs per shift, these results would convert to an average 8-h time-weighted average of 0.009 f/cc for a mechanic and 0.006 f/cc for a bystander. The results indicate that (i) the airborne concentrations for worker and bystander samples were significantly less than the current occupational exposure limit of 0.1 f/cc; (ii

  10. Updated mortality study of a cohort of asbestos textile workers.

    Science.gov (United States)

    Pira, Enrico; Romano, Canzio; Violante, Francesco S; Farioli, Andrea; Spatari, Giovanna; La Vecchia, Carlo; Boffetta, Paolo

    2016-09-01

    Limited information is available on risk of peritoneal mesothelioma after asbestos exposure, and in general on the risk of cancer after cessation of asbestos exposure. We updated to 2013 the follow-up of a cohort of 1083 female and 894 male textile workers with heavy asbestos exposure (up to 100 fb/mL), often for short periods. A total of 1019 deaths were observed, corresponding to a standardized mortality ratio (SMR) of 1.68 (95% confidence interval [CI]: 1.57-1.78). SMRs were 29.1 (95% CI: 21.5-38.6) for peritoneal cancer, 2.96 (95% CI: 2.50-3.49) for lung cancer, 33.7 (95% CI: 25.7-43.4) for pleural cancer, and 3.03 (95% CI: 1.69-4.99) for ovarian cancer. For pleural and peritoneal cancer, there was no consistent pattern of risk in relation to time since last exposure, whereas for lung cancer there was an indication of a decline in risk after 25 years since last exposure. The findings of this unique cohort provide novel data for peritoneal cancer, indicating that - as for pleural cancer - the excess risk does not decline up to several decades after cessation of exposure. © 2016 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

  11. Worldwide asbestos supply and consumption trends from 1900 to 2000

    Science.gov (United States)

    Virta, Robert L.

    2003-01-01

    The use of asbestos is one of the most controversial issues surrounding the industrial minerals industry. Its carcinogenic nature, an overall lack of knowledge of minimum safe exposure levels, its widespread use for more than 100 years, and the long latency for the development of lung cancer and mesothelioma are the main contributing factors to these controversies. Another factor is that, despite decades of research, the mechanisms responsible for its carcinogenic properties are still largely unknown. The United States has produced about 3.28 million metric tons of asbestos fiber and used approximately 31.5 million tons between 1900 and 2000. About half of this amount was used since 1960. Cumulative world production during that same time period was about 173 million tons. Assuming that unusually large stocks are not maintained and that world consumption roughly equals production, about half of the world production and consumption occurred since 1976. The United States and western European nations were the largest consumers of asbestos during the first two-thirds of the 20th century. They were surpassed by the collective production and consumption of States within the former Soviet Union by the 1970s. With the onset of the health issues concerning asbestos in the late 1960s and early 1970s, world production and consumption began to decline during the 1980s. In 2000, world consumption, estimated to be 1.48 million tons, was only 31% that of 1980. Countries in Asia, South America, and the former Soviet Union remain the largest users of asbestos. More specifically, Brazil, China, India, Japan, Russia, and Thailand are the only countries that consumed more than 60,000 tons of asbestos in 2000. These six countries accounted for more than 80% of world?s apparent consumption in 2000.

  12. Spirometry: a predictor of lung cancer among asbestos workers.

    Science.gov (United States)

    Świątkowska, Beata; Szeszenia-Dąbrowska, Neonila

    2017-01-01

    The significance of lung function as an independent risk factor for lung cancer remains unclear. The objective of the study is to answer the question if spirometry can identify patients at risk for lung cancer among people occupationally exposed to asbestos dust in the past. In order to identify a group of individuals with the highest risk of lung cancer incidence based on lung function levels of FEV 1 % predicted value, we examined 6882 subjects enrolled in the health surveillance program for asbestos related diseases over the years 2000-2014. We found a total of 110 cases confirmed as primary lung cancer. Using Cox's proportional hazards model after adjustment for age, gender, number of cigarettes, duration of smoking and cumulative asbestos exposure, we estimated that compared with the subjects with FEV 1 ≥90% pred, the HR of lung cancer was 1.40 (95%CI: 0.94-2.08) for the subjects with FEV 1 less than 90% and 1.95 (HR = 1.86; 95%CI: 1.12-3.08) for those with FEV 1 less than 70%. In addition, probability of the occurrence of lung cancer for FEV 1 spirometry and cancer diagnosis was three years or less. The results strongly support the hypothesis that spirometry can identify patients at a risk of lung cancer development. Regular spirometry should be offered to all patients with a history of asbestos exposure, at least once every three years.

  13. In vitro acellular dissolution of mineral fibres: A comparative study.

    Science.gov (United States)

    Gualtieri, Alessandro F; Pollastri, Simone; Bursi Gandolfi, Nicola; Gualtieri, Magdalena Lassinantti

    2018-05-04

    The study of the mechanisms by which mineral fibres promote adverse effects in both animals and humans is a hot topic of multidisciplinary research with many aspects that still need to be elucidated. Besides length and diameter, a key parameter that determines the toxicity/pathogenicity of a fibre is biopersistence, one component of which is biodurability. In this paper, biodurability of mineral fibres of social and economic importance (chrysotile, amphibole asbestos and fibrous erionite) has been determined for the first time in a systematic comparative way from in vitro acellular dissolution experiments. Dissolution was possible using the Gamble solution as simulated lung fluid (pH = 4 and at body temperature) so to reproduce the macrophage phagolysosome environment. The investigated mineral fibres display very different dissolution rates. For a 0.25 μm thick fibre, the calculated dissolution time of chrysotile is in the range 94-177 days, very short if compared to that of amphibole fibres (49-245 years), and fibrous erionite (181 years). Diffraction and SEM data on the dissolution products evidence that chrysotile rapidly undergoes amorphization with the formation of a nanophasic silica-rich fibrous metastable pseudomorph as first dissolution step whereas amphibole asbestos and fibrous erionite show minor signs of dissolution even after 9-12 months.

  14. Earth mineral resource of the month: asbestos

    Science.gov (United States)

    Virta, Robert L.

    2010-01-01

    The article discusses the characteristics and feature of asbestos. According to the author, asbestos is a generic name for six needle-shaped minerals that possess high tensile strengths, flexibility, and resistance to chemical and thermal degradation. These minerals are actinolite, amosite, anthophyllite, chrysolite, crocilodite and tremolite. Asbestos is used for strengthening concrete pipe, plastic components, and gypsum plasters.

  15. The mechanism of pleural inflammation by long carbon nanotubes: interaction of long fibres with macrophages stimulates them to amplify pro-inflammatory responses in mesothelial cells

    Directory of Open Access Journals (Sweden)

    Murphy Fiona A

    2012-04-01

    Full Text Available Abstract Carbon nanotubes (CNT are high aspect ratio nanoparticles with diameters in the nanometre range but lengths extending up to hundreds of microns. The structural similarities between CNT and asbestos have raised concern that they may pose a similar inhalation hazard. Recently CNT have been shown to elicit a length-dependent, asbestos-like inflammatory response in the pleural cavity of mice, where long fibres caused inflammation but short fibres did not. However the cellular mechanisms governing this response have yet to be elucidated. This study examined the in vitro effects of a range of CNT for their ability to stimulate the release of the acute phase cytokines; IL-1β, TNFα, IL-6 and the chemokine, IL-8 from both Met5a mesothelial cells and THP-1 macrophages. Results showed that direct exposure to CNT resulted in significant cytokine release from the macrophages but not mesothelial cells. This pro-inflammatory response was length dependent but modest and was shown to be a result of frustrated phagocytosis. Furthermore the indirect actions of the CNT were examined by treating the mesothelial cells with conditioned media from CNT-treated macrophages. This resulted in a dramatic amplification of the cytokine release from the mesothelial cells, a response which could be attenuated by inhibition of phagocytosis during the initial macrophage CNT treatments. We therefore hypothesise that long fibres elicit an inflammatory response in the pleural cavity via frustrated phagocytosis in pleural macrophages. The activated macrophages then stimulate an amplified pro-inflammatory cytokine response from the adjacent pleural mesothelial cells. This mechanism for producing a pro-inflammatory environment in the pleural space exposed to long CNT has implications for the general understanding of fibre-related pleural disease and design of safe nanofibres.

  16. Occupational characteristics of cases with asbestos-related diseases in The Netherlands

    OpenAIRE

    Burdorf, Alex; Dahhan, M.; Swuste, Paul

    2003-01-01

    textabstractOBJECTIVE: To describe the occupational background of cases with an asbestos-related disease and to present overall mesothelioma risks across industries with historical exposure to asbestos. METHODS: For the period 1990-2000, cases were collected from records held by two law firms. Information on jobs held, previous employers, activities performed and specific products used were obtained from patients themselves or next of kin. Branches of industry and occupations were coded and t...

  17. fibre separator

    African Journals Online (AJOL)

    ISHIOMA

    sharp edged spiral worm and four fixed blades, a pair of adjustable blades, ... energy and/or for the production of other products. ... 388 Afr. J. Environ. Sci. Technol. Figure 1. Layers of the palm fruit. planting. ... a skeleton of hard fibre running lengthwise through the ... maximum temperature of 28 - 32°C which is peculiar to.

  18. The transformation sequence of cement-asbestos slates up to 1200 deg. C and safe recycling of the reaction product in stoneware tile mixtures

    International Nuclear Information System (INIS)

    Gualtieri, A.F.; Cavenati, C.; Zanatto, I.; Meloni, M.; Elmi, G.; Gualtieri, M. Lassinantti

    2008-01-01

    Cement-asbestos is the main asbestos containing material still found in most of the European countries such as Italy. Man- and weathering-induced degradation of the cement-asbestos slates makes them a source of dispersion of asbestos fibres and represents a priority cause of concern. This concern is the main prompt for the actual policy of abatement and disposal of asbestos containing materials in controlled wastes. An alternative solution to the disposal in dumping sites is the direct temperature-induced transformation of the cement-asbestos slates into non-hazardous mineral phases. This patented process avoids the stage of mechanical milling of the material before the treatment, which improves the reactivity of the materials but may be critical for the dispersion of asbestos fibres in working and life environment. For the first time, this paper reports the description of the reaction path taking place during the firing of cement-asbestos slates up to the complete transformation temperature, 1200 deg. C. The reaction sequence was investigated using different experimental techniques such as optical and electron microscopy, in situ and ex situ quali-quantitative X-ray powder diffraction. The understanding of the complex reaction path is of basic importance for the optimization of industrial heating processes leading to a safe recycling of the transformed product. For the recycling of asbestos containing materials, the Italian laws require that the product of the crystal chemical transformation of asbestos containing materials must be entirely asbestos-free, and should not contain more than 0.1 wt% fraction of the carcinogenic substances such as cristobalite. Moreover, if fibrous phases other than asbestos (with length to diameter ratio >3) are found, they must have a geometrical diameter larger than 3 μm. We have demonstrated that using an interplay of different experimental techniques, it is possible to safely verify the complete transformation of asbestos

  19. Mechanisms of macrophage accumulation in the lungs of asbestos-exposed subjects

    International Nuclear Information System (INIS)

    Spurzem, J.R.; Saltini, C.; Rom, W.; Winchester, R.J.; Crystal, R.G.

    1987-01-01

    Chronic asbestos exposure is associated with the accumulation of mononuclear phagocytes in the lower respiratory tract. This process can be both protective and injurious, since macrophages can aid in asbestos clearance yet also modulate structural derangements of the alveolar walls. To understand why macrophages accumulate in the lungs of asbestos-exposed persons, 2 possible mechanisms were evaluated using alveolar macrophages from subjects with histories of chronic high exposure to airborne asbestos: enhanced recruitment of blood monocytes to the lung, and an increased rate of replication of macrophages in situ. Monoclonal antibody analysis with antibodies that detect surface antigens on the majority of circulating blood monocytes but only on a minority of mature alveolar macrophages demonstrated that an increased proportion of alveolar macrophages of asbestos workers expressed monocyte lineage antigens, suggesting the presence of young newly recruited macrophages and thus enhanced recruitment. Culture of the alveolar macrophages from these subjects with [ 3 H]thymidine followed by autoradiography demonstrated an increased proportion of alveolar macrophages synthesizing DNA, suggesting the macrophages are replicating at an increased rate in situ. These observations are consistent with the concept that both enhanced recruitment of blood monocytes and increased local proliferation of alveolar macrophages contribute to the accumulation mononuclear phagocytes in the lung of persons with chronic asbestos exposure

  20. ROS-mediated genotoxicity of asbestos-cement in mammalian lung cells in vitro

    Directory of Open Access Journals (Sweden)

    Rödelsperger Klaus

    2005-10-01

    Full Text Available Abstract Asbestos is a known carcinogen and co-carcinogen. It is a persisting risk in our daily life due to its use in building material as asbestos-cement powder. The present study done on V79-cells (Chinese hamster lung cells demonstrates the cytotoxic and genotoxic potential of asbestos-cement powder (ACP in comparison with chrysotile asbestos. A co-exposure of chrysotile and ACP was tested using the cell viability test and the micronucleus assay. The kinetochore analysis had been used to analyse the pathway causing such genotoxic effects. Thiobarbituric acid-reactive substances were determined as evidence for the production of reactive oxygen species. Both, asbestos cement as well as chrysotile formed micronuclei and induced loss of cell viability in a concentration- and time- dependent way. Results of TBARS analysis and iron chelator experiments showed induction of free radicals in ACP- and chrysotile exposed cultures. CaSO4 appeared to be a negligible entity in enhancing the toxic potential of ACP. The co-exposure of both, ACP and chrysotile, showed an additive effect in enhancing the toxicity. The overall study suggests that asbestos-cement is cytotoxic as well as genotoxic in vitro. In comparison to chrysotile the magnitude of the toxicity was less, but co-exposure increased the toxicity of both.

  1. Mortality from cancer and other causes among Italian chrysotile asbestos miners.

    Science.gov (United States)

    Pira, Enrico; Romano, Canzio; Donato, Francesca; Pelucchi, Claudio; Vecchia, Carlo La; Boffetta, Paolo

    2017-08-01

    To investigate the long-term mortality of a cohort of Italian asbestos miners. The cohort included 1056 men employed in a chrysotile mine between 1930 and 1990, who were followed up during 1946-2014, for a total of 37 471 person-years of observation. Expected deaths and SMRs were computed using national and local (after 1980, when available) reference. A total of 294 (27.8%) subjects were alive and at the end of follow-up, 722 (68.4%) were dead and 40 (3.8%) were lost to follow-up. The SMR for overall mortality was 1.35 (95%CI 1.25 to 1.45). The SMR for pleural cancer, based on seven observed deaths, was 5.54 (95% CI 2.22 to 11.4) and related to time since first exposure, but not to duration of employment, cumulative exposure or time since last exposure. The SMR for lung cancer was 1.16 (95% CI 0.87 to 1.52; 53 observed deaths), with no excess among workers with cumulative exposure below 100 fibre/mL-years (SMR 0.82; 95% CI 0.44 to 1.40). The update of the follow-up of this cohort confirmed an increased mortality from pleural cancer mortality in miners exposed to chrysotile and a lack of significant increase in lung cancer mortality. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  2. THE USE OF SISAL FIBRE AS REINFORCEMENT IN CEMENT BASED COMPOSITES

    Directory of Open Access Journals (Sweden)

    Romildo Dias Tolêdo Filho

    1999-08-01

    Full Text Available ABSTRACT The inclusion of fibre reinforcement in concrete, mortar and cement paste can enhance many of the engineering properties of the basic materials, such as fracture toughness, flexural strength and resistance to fatigue, impact, thermal shock and spalling. In recent years, a great deal of interest has been created worldwide on the potential applications of natural fibre reinforced, cement based composites. Investigations have been carried out in many countries on various mechanical properties, physical performance and durability of cement based matrices reinforced with naturally occurring fibres including sisal, coconut, jute, bamboo and wood fibres. These fibres have always been considered promising as reinforcement of cement based matrices because of their availability, low cost and low consumption of energy. In this review, the general properties of the composites are described in relation to fibre content, length, strength and stiffness. A chronological development of sisal fibre reinforced, cement based matrices is reported and experimental data are provided to illustrate the performance of sisal fibre reinforced cement composites. A brief description on the use of these composite materials as building products has been included. The influence of sisal fibres on the development of plastic shrinkage in the pre-hardened state, on tensile, compressive and bending strength in the hardened state of mortar mixes is discussed. Creep and drying shrinkage of the composites and the durability of natural fibres in cement based matrices are of particular interest and are also highlighted. The results show that the composites reinforced with sisal fibres are reliable materials to be used in practice for the production of structural elements to be used in rural and civil construction. This material could be a substitute asbestos-cement composite, which is a serious hazard to human and animal health and is prohibited in industrialized countries. The

  3. Diagnostic Performance of Ultra-Low-Dose Computed Tomography for Detecting Asbestos-Related Pleuropulmonary Diseases: Prospective Study in a Screening Setting

    OpenAIRE

    Schaal, Marysa; Severac, Fran?ois; Labani, Aissam; Jeung, Mi-Young; Roy, Catherine; Ohana, Micka?l

    2016-01-01

    Objective To evaluate the diagnostic performance of Ultra-Low-Dose Chest CT (ULD CT) for the detection of any asbestos-related lesions (primary endpoint) and specific asbestos-related abnormalities, i.e. non-calcified and calcified pleural plaques, diffuse pleural thickening, asbestosis and significant lung nodules (secondary endpoints). Material and Methods 55 male patients (55.7?8.1 years old) with occupational asbestos exposure for at least 15 years and where CT screening was indicated wer...

  4. Worldwide Asbestos Supply and Consumption Trends from 1900 through 2003

    Science.gov (United States)

    Virta, Robert L.

    2006-01-01

    This Circular updates and supersedes U.S. Geological Survey (USGS) Open-File Report 03–083, "Worldwide Asbestos Supply and Consumption Trends from 1900 to 2000," with the addition of supply and consumption estimates and analysis from 2001 through 2003 and revisions to the consumption estimates for 1998 through 2000. The text from Open-File Report 03–083 also has been updated in this Circular to include revisions to and expansion of the time-series coverage. The use of asbestos is one of the most controversial issues surrounding the industrial minerals industry. Its carcinogenic nature, an overall lack of knowledge of minimum safe exposure levels, its widespread use for more than 100 years, and the long latency for the development of lung cancer and mesothelioma are the main contributing factors to these controversies. Another factor is that, despite decades of research, the mechanisms responsible for its carcinogenic properties are still largely unknown. The United States produced about 3.29 million metric tons (Mt) of asbestos and used approximately 31.5 Mt between 1900 and 2003. About half of this amount was used after 1960. In 2002, the last asbestos mine in the United States closed, marking the end of more than 110 years of U.S. asbestos production. Cumulative world production from 1900 through 2003 was about 181 Mt. If one assumes that unusually large stocks were not maintained and that world consumption roughly equaled production, then about half of the world production and consumption occurred between the end of 1976 and the end of 2003. The United States and Western European nations were the largest consumers of asbestos during the first two-thirds of the 20th century. They were surpassed by the collective production and consumption of Kazakhstan and Russia by the 1970s. After the onset of the health issues concerning asbestos in the late 1960s and early 1970s, the decline in world production and consumption began to be evident in the late 1970s and

  5. Impact performance of the fibre-cement composites

    International Nuclear Information System (INIS)

    Agopyan, V.; Savastano Junior, H.

    1995-01-01

    The transition zone of short filament fibres randomly dispersed in a paste of ordinary portland cement is analysed. Composites of vegetable fibres (malva, sisal and coir) are compared with those containing chrysotile asbestos and polypropylene fibres. The series of composites are prepared to be tested at the ages of 7, 28, 90 and 180 days. The water-cement ratio is 0.38 and at the age of 28 days specimens with ratio of 0.30 and 0.46 are also tested. The backscattered electron image and energy dispersive spectroscopy identify the major properties of the fibre-matrix interface. The microstructural characteristics are directly associated with the toughness of the composites, once the energy dissipation at transition zone is confirmed. (author). 8 refs., 4 figs., 1 tab

  6. Scintillating fibres

    International Nuclear Information System (INIS)

    Nahnhauer, R.

    1990-01-01

    In the search for new detector techniques, scintillating fibre technology has already gained a firm foothold, and is a strong contender for the extreme experimental conditions of tomorrow's machines. Organized by a group from the Institute of High Energy Physics, Berlin-Zeuthen, a workshop held from 3-5 September in the nearby village of Blossin brought together experts from East and West, and from science and industry

  7. Scintillating fibres

    Energy Technology Data Exchange (ETDEWEB)

    Nahnhauer, R. [IHEP Zeuthen (Germany)

    1990-11-15

    In the search for new detector techniques, scintillating fibre technology has already gained a firm foothold, and is a strong contender for the extreme experimental conditions of tomorrow's machines. Organized by a group from the Institute of High Energy Physics, Berlin-Zeuthen, a workshop held from 3-5 September in the nearby village of Blossin brought together experts from East and West, and from science and industry.

  8. Asbestos Induces Oxidative Stress and Activation of Nrf2 Signaling in Murine Macrophages: Chemopreventive Role of the Synthetic Lignan Secoisolariciresinol Diglucoside (LGM2605

    Directory of Open Access Journals (Sweden)

    Ralph A. Pietrofesa

    2016-03-01

    Full Text Available The interaction of asbestos fibers with macrophages generates harmful reactive oxygen species (ROS and subsequent oxidative cell damage that are key processes linked to malignancy. Secoisolariciresinol diglucoside (SDG is a non-toxic, flaxseed-derived pluripotent compound that has antioxidant properties and may thus function as a chemopreventive agent for asbestos-induced mesothelioma. We thus evaluated synthetic SDG (LGM2605 in asbestos-exposed, elicited murine peritoneal macrophages as an in vitro model of tissue phagocytic response to the presence of asbestos in the pleural space. Murine peritoneal macrophages (MFs were exposed to crocidolite asbestos fibers (20 µg/cm2 and evaluated at various times post exposure for cytotoxicity, ROS generation, malondialdehyde (MDA, and levels of 8-iso Prostaglandin F2α (8-isoP. We then evaluated the ability of LGM2605 to mitigate asbestos-induced oxidative stress by administering LGM2605 (50 µM 4-h prior to asbestos exposure. We observed a significant (p < 0.0001, time-dependent increase in asbestos-induced cytotoxicity, ROS generation, and the release of MDA and 8-iso Prostaglandin F2α, markers of lipid peroxidation, which increased linearly over time. LGM2605 treatment significantly (p < 0.0001 reduced asbestos-induced cytotoxicity and ROS generation, while decreasing levels of MDA and 8-isoP by 71%–88% and 41%–73%, respectively. Importantly, exposure to asbestos fibers induced cell protective defenses, such as cellular Nrf2 activation and the expression of phase II antioxidant enzymes, HO-1 and Nqo1 that were further enhanced by LGM2605 treatment. LGM2605 boosted antioxidant defenses, as well as reduced asbestos-induced ROS generation and markers of oxidative stress in murine peritoneal macrophages, supporting its possible use as a chemoprevention agent in the development of asbestos-induced malignant mesothelioma.

  9. Asbesto, asbestose e câncer: critérios diagnósticos Asbestos, asbestosis and cancer: diagnostic criteria

    Directory of Open Access Journals (Sweden)

    VERA LUIZA CAPELOZZI

    2001-07-01

    about 10,000 workers in the mining activity, and an unknown number of workers in asbestos-cement industry. A study, with scientific appropriate investigation, with the purpose to evaluate the effects of asbestos exposure over the health of the mine workers in this country, was done by interinstitution researchers, and untitled "Morbidity and mortality among workers exposed to asbestos in mining activities -- 1940/1996". With the experience achieved in the course of this study, the objective of this report is to make an overview of asbestos-related diseases, mainly with respect to difficulties in establishing the histopathologic diagnosis.

  10. The Tale of Asbestos in Sweden 1972–1986—The Pathway to a Near-Total Ban

    Directory of Open Access Journals (Sweden)

    Peter Westerholm

    2017-11-01

    Full Text Available This paper provides a narrative of the national intervention strategy in Sweden aimed to restrict the industrial use of asbestos. For many years, asbestos was imported for widespread industrial use, resulting in large amounts throughout Swedish society. In 1972, the whistle was blown in a Communist Party parliamentary motion describing asbestos as a health hazard and requesting action to prohibit its use. Although the motion was rejected, it initiated the extensive charting of asbestos sources on a tripartite basis, involving government agencies, and employer and trade-union organizations. Restrictive asbestos management practices were enforced from July 1982. The year 1985 saw the Government Asbestos Commission review, covering use-determining factors, international regulations, and assessments of cancer risks. The relative risks of chrysotile and amphibole were considered internationally (by the IARC, since chrysotile (a Canadian export was regarded as unharmful in Canada at that time. Prohibiting asbestos use resulted in its virtual disappearance as an import to Sweden from the early 1980s. However, asbestos has undergone a transition from an occupational to a public-health hazard (although some work-related hazards, such as handling and disposal, remain. The transition reflects the public’s exposure to existing stocks, in homes, workplaces, etc. Mesothelioma incidence has come to be regarded as an indicator of prevention effectiveness.

  11. The Tale of Asbestos in Sweden 1972-1986-The Pathway to a Near-Total Ban.

    Science.gov (United States)

    Westerholm, Peter; Remaéus, Bertil; Svartengren, Magnus

    2017-11-22

    This paper provides a narrative of the national intervention strategy in Sweden aimed to restrict the industrial use of asbestos. For many years, asbestos was imported for widespread industrial use, resulting in large amounts throughout Swedish society. In 1972, the whistle was blown in a Communist Party parliamentary motion describing asbestos as a health hazard and requesting action to prohibit its use. Although the motion was rejected, it initiated the extensive charting of asbestos sources on a tripartite basis, involving government agencies, and employer and trade-union organizations. Restrictive asbestos management practices were enforced from July 1982. The year 1985 saw the Government Asbestos Commission review, covering use-determining factors, international regulations, and assessments of cancer risks. The relative risks of chrysotile and amphibole were considered internationally (by the IARC), since chrysotile (a Canadian export) was regarded as unharmful in Canada at that time. Prohibiting asbestos use resulted in its virtual disappearance as an import to Sweden from the early 1980s. However, asbestos has undergone a transition from an occupational to a public-health hazard (although some work-related hazards, such as handling and disposal, remain). The transition reflects the public's exposure to existing stocks, in homes, workplaces, etc. Mesothelioma incidence has come to be regarded as an indicator of prevention effectiveness.

  12. Compensation for environmental asbestos-related diseases in South Africa: a neglected issue

    Directory of Open Access Journals (Sweden)

    Ntombizodwa Ndlovu

    2013-01-01

    Full Text Available Background: Environmentally acquired asbestos-related diseases (ARDs are of concern globally. In South Africa, there is widespread contamination of the environment due to historical asbestos mining operations that were poorly regulated. Although the law makes provision for the compensation of occupationally acquired ARDs, compensation for environmentally acquired ARDs is only available through the Asbestos Relief Trust (ART and Kgalagadi Relief Trust, both of which are administered by the ART. This study assessed ARDs and compensation outcomes of environmental claims submitted to the Trusts. Methods: The personal details, medical diagnoses, and exposure information of all environmental claims considered by the Trusts from their inception in 2003 to April 2010 were used to calculate the numbers and proportions of ARDs and compensation awards. Results: There were 146 environmental claimants of whom 35 (23.9% had fibrotic pleural disease, 1 (0.7% had lung cancer, and 77 (52.7% had malignant mesothelioma. 53 (36.3% claimants were compensated: 20 with fibrotic pleural disease and 33 with mesothelioma. Of the 93 (63.7% claimants who were not compensated, 33 had no ARDs, 18 had fibrotic pleural disease, 1 had lung cancer, and 44 had mesothelioma. In addition to having ARDs, those that were compensated had qualifying domestic (33; 62.2% or neighbourhood (20; 37.8% exposures to asbestos. Most of the claimants who were not compensated had ARDs but their exposures did not meet the Trusts’ exposure criteria. Conclusions: This study demonstrates the environmental impact of asbestos mining on the burden of ARDs. Mesothelioma was the most common disease diagnosed, but most cases were not compensated. This highlights that there is little redress for individuals with environmentally acquired ARDs in South Africa. To stop this ARD epidemic, there is a need for the rehabilitation of abandoned asbestos mines and the environment. These issues may not be unique to

  13. Compensation for environmental asbestos-related diseases in South Africa: a neglected issue.

    Science.gov (United States)

    Ndlovu, Ntombizodwa; Naude, Jim teWater; Murray, Jill

    2013-01-24

    Environmentally acquired asbestos-related diseases (ARDs) are of concern globally. In South Africa, there is widespread contamination of the environment due to historical asbestos mining operations that were poorly regulated. Although the law makes provision for the compensation of occupationally acquired ARDs, compensation for environmentally acquired ARDs is only available through the Asbestos Relief Trust (ART) and Kgalagadi Relief Trust, both of which are administered by the ART. This study assessed ARDs and compensation outcomes of environmental claims submitted to the Trusts. The personal details, medical diagnoses, and exposure information of all environmental claims considered by the Trusts from their inception in 2003 to April 2010 were used to calculate the numbers and proportions of ARDs and compensation awards. There were 146 environmental claimants of whom 35 (23.9%) had fibrotic pleural disease, 1 (0.7%) had lung cancer, and 77 (52.7%) had malignant mesothelioma. 53 (36.3%) claimants were compensated: 20 with fibrotic pleural disease and 33 with mesothelioma. Of the 93 (63.7%) claimants who were not compensated, 33 had no ARDs, 18 had fibrotic pleural disease, 1 had lung cancer, and 44 had mesothelioma. In addition to having ARDs, those that were compensated had qualifying domestic (33; 62.2%) or neighbourhood (20; 37.8%) exposures to asbestos. Most of the claimants who were not compensated had ARDs but their exposures did not meet the Trusts' exposure criteria. This study demonstrates the environmental impact of asbestos mining on the burden of ARDs. Mesothelioma was the most common disease diagnosed, but most cases were not compensated. This highlights that there is little redress for individuals with environmentally acquired ARDs in South Africa. To stop this ARD epidemic, there is a need for the rehabilitation of abandoned asbestos mines and the environment. These issues may not be unique to South Africa as many countries continue to mine and use

  14. The Contribution of Health Professionals to the Creation of Occupational Health Standards: The Impact of Professional Ethics in the Case of Asbestos

    NARCIS (Netherlands)

    Plomp, H.N.

    2013-01-01

    ln the Netherlands, as in other Western countries, there is a great time lag between the evidence of the carcinogenicity of asbestos (1949) and the launching of first legislation that reduces the occupational exposure (1971) and finally, the complete ban of the production and application of asbestos

  15. Mineralogical conversion of asbestos containing materials

    International Nuclear Information System (INIS)

    Pulsford, S.K.; Foltz, A.D.; Ek, R.B.

    1996-01-01

    The principal objective of the Technical Task Plan (TTP) is to demonstrate a thermal-chemical mineralogical asbestos conversion unit at the Hanford Site, which converts non-radiological asbestos containing materials (ACMs) into an asbestos-free material. The permanent thermal-chemical mineralogical conversion of ACMs to a non-toxic, non-hazardous, potentially marketable end product should not only significantly reduce the waste stream volumes but terminate the open-quotes cradle to graveclose quotes ownership liabilities

  16. Factors Associated With Non-compliance of Asbestos Occupational Standards in Brake Repair Workers.

    Science.gov (United States)

    Cely-García, María Fernanda; Curriero, Frank C; Giraldo, Margarita; Méndez, Lorena; Breysse, Patrick N; Durán, Mauricio; Torres-Duque, Carlos A; González-García, Mauricio; Pérez, Carolina; Parada, Patricia; Ramos-Bonilla, Juan Pablo

    2016-10-01

    Asbestos and non-asbestos containing brake products are currently used in low- and middle-income countries like Colombia. Because brake products are distributed detached from their supports, they require manipulation before installation, which release fibers and expose workers. Previous studies of our research group have documented exposures in excess of the widely accepted 0.1 f/cm(3) exposure guideline. The aim of this study is to identify factors associated with non-compliance of the 8-h time weighted average (TWA) 0.1 f/cm(3) asbestos occupational limit among brake mechanics (i.e. riveters). Eighteen brake repair shops (BRS) located in Bogotá (Colombia) were sampled during 3 to 6 consecutive days for the entire work-shift. Personal and short-term personal samples were collected following NIOSH methods 7400 and 7402. Longitudinal based logistic regression models were used to determine the association between the odds of exceeding the 8-h TWA 0.1 f/cm(3) asbestos occupational limit and variables such as type of tasks performed by workers, workload (number of products manipulated daily), years of experience as riveters, and shop characteristics. These models can be used to estimate the odds of being currently or historically overexposed when sampling data do not exist. Since the information required to run the models can vary for both retrospective and current asbestos occupational exposure studies, three models were constructed with different information requirements. The first model evaluated the association between the odds of non-compliance with variables related to the workload, the second model evaluated the association between the odds of non-compliance with variables related to the manipulation tasks, and the third model evaluated the association between the odds of non-compliance with variables related with both the type of tasks performed by workers and the workload. Variables associated with the odds of non-compliance included conducting at least one

  17. Asbestos-related occupational cancers compensated under the Industrial Accident Compensation Insurance in Korea.

    Science.gov (United States)

    Ahn, Yeon-Soon; Kang, Seong-Kyu

    2009-04-01

    Compensation for asbestos-related cancers occurring in occupationally-exposed workers is a global issue; this is also an issue in Korea. To provide basic information regarding compensation for workers exposed to asbestos, 60 cases of asbestos-related occupational lung cancer and mesothelioma that were compensated during 15 yr; from 1993 (the year the first case was compensated) to 2007 by the Korea Labor Welfare Corporation (KLWC) are described. The characteristics of the cases were analyzed using the KLWC electronic data and the epidemiologic investigation data conducted by the Occupational Safety and Health Research Institute (OSHRI) of the Korea Occupational Safety and Health Agency (KOSHA). The KLWC approved compensation for 41 cases of lung cancer and 19 cases of mesothelioma. Males accounted for 91.7% (55 cases) of the approved cases. The most common age group was 50-59 yr (45.0%). The mean duration of asbestos exposure for lung cancer and mesothelioma cases was 19.2 and 16.0 yr, respectively. The mean latency period for lung cancer and mesothelioma cases was 22.1 and 22.6 yr, respectively. The major industries associated with mesothelioma cases were shipbuilding and maintenance (4 cases) and manufacture of asbestos textiles (3 cases). The major industries associated with lung cancer cases were shipbuilding and maintenance (7 cases), construction (6 cases), and manufacture of basic metals (4 cases). The statistics pertaining to asbestos-related occupational cancers in Korea differ from other developed countries in that more cases of mesothelioma were compensated than lung cancer cases. Also, the mean latency period for disease onset was shorter than reported by existing epidemiologic studies; this discrepancy may be related to the short history of occupational asbestos use in Korea. Considering the current Korean use of asbestos, the number of compensated cases in Korea is expected to increase in the future but not as much as developed countries.

  18. Asbestos, dental x-rays, tobacco, and alcohol in the epidemiology of laryngeal cancer

    International Nuclear Information System (INIS)

    Hinds, M.W.; Thomas, D.B.; O'Reilly, H.P.

    1979-01-01

    A case-control study of 47 laryngeal cancers in males of three counties of Washington State was conducted. Personal interview was used to obtain information on smoking, alcohol use, exposure to asbestos, and other substances, and x-rays of the head and neck area. Smoking and alcohol consumption were found to increase risk of laryngeal cancer independently, with a clear dose-response relationship. Neither asbestos exposure nor exposure to other substances was found to significantly increase the risk of laryngeal cancer, although the relative risk with asbestos exposure was 1.75. Lifetime history of exposure to dental x-rays on five or more occasions was associated with significantly increased risk of laryngeal cancer among heavy smokers but not among light smokers. The importance of tobacco and alcohol in the epidemiology of laryngeal cancer was re-affirmed, the importance of asbestos exposure was brought into question, and a possible relationship of laryngeal cancer with exposure to dental x-rays among heavy smokers was demonstrated

  19. Factoring-in agglomeration of carbon nanotubes and nanofibers for better prediction of their toxicity versus asbestos

    Directory of Open Access Journals (Sweden)

    Murray Ashley R

    2012-04-01

    Full Text Available Abstract Background Carbon nanotubes (CNT and carbon nanofibers (CNF are allotropes of carbon featuring fibrous morphology. The dimensions and high aspect ratio of CNT and CNF have prompted the comparison with naturally occurring asbestos fibers which are known to be extremely pathogenic. While the toxicity and hazardous outcomes elicited by airborne exposure to single-walled CNT or asbestos have been widely reported, very limited data are currently available describing adverse effects of respirable CNF. Results Here, we assessed pulmonary inflammation, fibrosis, oxidative stress markers and systemic immune responses to respirable CNF in comparison to single-walled CNT (SWCNT and asbestos. Pulmonary inflammatory and fibrogenic responses to CNF, SWCNT and asbestos varied depending upon the agglomeration state of the particles/fibers. Foci of granulomatous lesions and collagen deposition were associated with dense particle-like SWCNT agglomerates, while no granuloma formation was found following exposure to fiber-like CNF or asbestos. The average thickness of the alveolar connective tissue - a marker of interstitial fibrosis - was increased 28 days post SWCNT, CNF or asbestos exposure. Exposure to SWCNT, CNF or asbestos resulted in oxidative stress evidenced by accumulations of 4-HNE and carbonylated proteins in the lung tissues. Additionally, local inflammatory and fibrogenic responses were accompanied by modified systemic immunity, as documented by decreased proliferation of splenic T cells ex vivo on day 28 post exposure. The accuracies of assessments of effective surface area for asbestos, SWCNT and CNF (based on geometrical analysis of their agglomeration versus estimates of mass dose and number of particles were compared as predictors of toxicological outcomes. Conclusions We provide evidence that effective surface area along with mass dose rather than specific surface area or particle number are significantly correlated with toxicological

  20. Factoring-in agglomeration of carbon nanotubes and nanofibers for better prediction of their toxicity versus asbestos.

    Science.gov (United States)

    Murray, Ashley R; Kisin, Elena R; Tkach, Alexey V; Yanamala, Naveena; Mercer, Robert; Young, Shih-Houng; Fadeel, Bengt; Kagan, Valerian E; Shvedova, Anna A

    2012-04-10

    Carbon nanotubes (CNT) and carbon nanofibers (CNF) are allotropes of carbon featuring fibrous morphology. The dimensions and high aspect ratio of CNT and CNF have prompted the comparison with naturally occurring asbestos fibers which are known to be extremely pathogenic. While the toxicity and hazardous outcomes elicited by airborne exposure to single-walled CNT or asbestos have been widely reported, very limited data are currently available describing adverse effects of respirable CNF. Here, we assessed pulmonary inflammation, fibrosis, oxidative stress markers and systemic immune responses to respirable CNF in comparison to single-walled CNT (SWCNT) and asbestos. Pulmonary inflammatory and fibrogenic responses to CNF, SWCNT and asbestos varied depending upon the agglomeration state of the particles/fibers. Foci of granulomatous lesions and collagen deposition were associated with dense particle-like SWCNT agglomerates, while no granuloma formation was found following exposure to fiber-like CNF or asbestos. The average thickness of the alveolar connective tissue--a marker of interstitial fibrosis--was increased 28 days post SWCNT, CNF or asbestos exposure. Exposure to SWCNT, CNF or asbestos resulted in oxidative stress evidenced by accumulations of 4-HNE and carbonylated proteins in the lung tissues. Additionally, local inflammatory and fibrogenic responses were accompanied by modified systemic immunity, as documented by decreased proliferation of splenic T cells ex vivo on day 28 post exposure. The accuracies of assessments of effective surface area for asbestos, SWCNT and CNF (based on geometrical analysis of their agglomeration) versus estimates of mass dose and number of particles were compared as predictors of toxicological outcomes. We provide evidence that effective surface area along with mass dose rather than specific surface area or particle number are significantly correlated with toxicological responses to carbonaceous fibrous nanoparticles. Therefore

  1. Naturally occurring asbestos-A recurring public policy challenge

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R.J.; Strohmeier, B.R. [RJ Lee Group, Inc., 350 Hochberg Road, Monroeville, PA 15146 (United States); Bunker, K.L. [RJ Lee Group, Inc., 350 Hochberg Road, Monroeville, PA 15146 (United States)], E-mail: klbunker@rjlg.com; Van Orden, D.R. [RJ Lee Group, Inc., 350 Hochberg Road, Monroeville, PA 15146 (United States)

    2008-05-01

    The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in

  2. Naturally occurring asbestos-A recurring public policy challenge

    International Nuclear Information System (INIS)

    Lee, R.J.; Strohmeier, B.R.; Bunker, K.L.; Van Orden, D.R.

    2008-01-01

    The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in

  3. Naturally occurring asbestos: a recurring public policy challenge.

    Science.gov (United States)

    Lee, R J; Strohmeier, B R; Bunker, K L; Van Orden, D R

    2008-05-01

    The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in

  4. WORKSHOP: Scintillating fibre detectors

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Scintillating fibre detector development and technology for the proposed US Superconducting Supercollider, SSC, was the subject of a recent workshop at Fermilab, with participation from the high energy physics community and from industry. Sessions covered the current status of fibre technology and fibre detectors, new detector applications, fluorescent materials and scintillation compositions, radiation damage effects, amplification and imaging structures, and scintillation fibre fabrication techniques

  5. Spalling behavior and residual resistance of fibre reinforced Ultra-High performance concrete after exposure to high temperatures

    Directory of Open Access Journals (Sweden)

    Xiong, Ming-Xiang

    2015-12-01

    Full Text Available Experimental results of spalling and residual mechanical properties of ultra-high performance concrete after exposure to high temperatures are presented in this paper. The compressive strength of the ultra-high performance concrete ranged from 160 MPa~185 MPa. This study aimed to discover the effective way to prevent spalling for the ultra-high performance concrete and gauge its mechanical properties after it was subjected to fire. The effects of fiber type, fiber dosage, heating rate and curing condition were investigated. Test results showed that the compressive strength and elastic modulus of the ultra-high performance concrete declined slower than those of normal strength concrete after elevated temperatures. Polypropylene fiber rather than steel fiber was found effective to prevent spalling but affected workability. The effective fiber type and dosage were recommended to prevent spalling and ensure sufficient workability for casting and pumping of the ultra-high performance concrete.En este trabajo se presentan los resultados más relevantes del trabajo experimental realizado para valorar la laminación y las propiedades mecánicas residuales de hormigón de ultra-altas prestaciones tras su exposición a altas temperaturas. La resistencia a la compresión del hormigón de ultra-altas prestaciones osciló entre 160 MPa~185 MPa. El objetivo de este estudio fue descubrir una manera eficaz de prevenir desprendimientos y/o laminaciones en este hormigón y medir sus propiedades mecánicas después de ser sometido al fuego. Las variables estudiadas fueron la presencia y dosificación de fibras, velocidad de calentamiento y condiciones de curado. Los resultados mostraron, tras la exposición a altas temperaturas, que la resistencia a compresión y el módulo de elasticidad del hormigón de ultra-altas prestaciones disminuían más lento que las de un hormigón con resistencia normal. La fibra de polipropileno resultó más eficaz para prevenir

  6. Asbestos and Asbestosis. LC Science Tracer Bullet.

    Science.gov (United States)

    Alderson, Karen L., Comp.

    Asbestos is a naturally occurring mineral found in several forms and because of its temperature-resisting properties, flexibility, and strength, it was widely used in the construction industry, automobile industry, and textile industry. Asbestos becomes dangerous when it crumbles and breaks releasing fibers that can cause asbestosis and certain…

  7. [Screening for asbestos-related conditions

    DEFF Research Database (Denmark)

    Brauer, C.; Baandrup, U.; Jacobsen, P.

    2009-01-01

    in asbestos-exposed populations. Data do not currently support implementation of screening programs for asbestos-exposed persons in Denmark. Since mesothelioma is most often an occupational disease, these patients should be admitted to an occupational clinic for aetiological evaluation Udgivelsesdato: 2009/2/2...

  8. 40 CFR 61.142 - Standard for asbestos mills.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for asbestos mills. 61.142... § 61.142 Standard for asbestos mills. (a) Each owner or operator of an asbestos mill shall either discharge no visible emissions to the outside air from that asbestos mill, including fugitive sources, or...

  9. Mechanisms of asbestos-induced squamous metaplasia in tracheobronchial epithelial cells

    International Nuclear Information System (INIS)

    Cameron, G.; Woodworth, C.D.; Edmondson, S.; Mossman, B.T.

    1989-01-01

    Within 1 to 4 weeks after exposure to asbestos, differentiated rodent and human tracheobronchial epithelial cells in organ culture undergo squamous metaplasia, a putative preneoplastic lesion characterized by conversion of mucociliary cell types to keratinizing cells. The exogenous addition of retinal acetate (RA) to culture medium of hamster tracheal organ cultures reverses preestablished, asbestos-induced squamous metaplasia, although data suggest that the effectiveness of RA decreases as the length of time between exposure to asbestos and initial application of RA increases. Difluoromethylornithine (DFMO), an irreversible inhibitor of ornithine decarboxylase (ODC), inhibits squamous metaplasia caused by asbestos or vitamin A deficiency, whereas addition of methylglyoxal bis(guanyl-hydrazone) (MGBG), a structural analog of spermidine and inhibitor of S-adenosylmethionine decarboxylase, causes an enhancement of metaplasia under both circumstances. Basal cell hyperplasia and increased incorporation of 3 H-thymidine by tracheal epithelial cells also are seen after addition of the polyamines, putrescine or spermidine, to tracheal organ cultures, an observation supporting the importance of polyamines in the development of this lesion. The use of retinoids and inhibitors of ODC could be promising as preventive and/or therapeutic approaches for individuals at high risk for development of asbestos-associated diseases

  10. Asbestos and Asbestos-related Diseases in Vietnam: In reference to the International Labor Organization/World Health Organization National Asbestos Profile

    Directory of Open Access Journals (Sweden)

    Van Hai Pham

    2013-06-01

    Full Text Available This paper describes progress on formulating a national asbestos profile for the country of Vietnam. The Center of Asbestos Resource, Vietnam, formulated a National Profile on Asbestos-related Occupational Health, with due reference to the International Labor Organization/World Health Organization National Asbestos Profile. The Center of Asbestos Resource was established by the Vietnamese Health Environment Management Agency and the National Institute of Labor Protection, with the support of the Australian Agency for International Development, as a coordinating point for asbestos-related issues in Vietnam. Under the National Profile on Asbestos-related Occupational Health framework, the Center of Asbestos Resource succeeded in compiling relevant information for 15 of the 18 designated items outlined in the International Labor Organization/World Health Organization National Asbestos Profile, some overlaps of the information items notwithstanding. Today, Vietnam continues to import and use an average of more than 60,000 metric tons of raw asbestos per year. Information on asbestos-related diseases is limited, but the country has begun to diagnose mesothelioma cases, with the technical cooperation of Japan. As it stands, the National Profile on Asbestos-related Occupational Health needs further work and updating. However, we envisage that the National Profile on Asbestos-related Occupational Health will ultimately facilitate the smooth transition to an asbestos-free Vietnam.

  11. Synthetic Lignan Secoisolariciresinol Diglucoside (LGM2605 Reduces Asbestos-Induced Cytotoxicity in an Nrf2-Dependent and -Independent Manner

    Directory of Open Access Journals (Sweden)

    Ralph A. Pietrofesa

    2018-03-01

    Full Text Available Asbestos exposure triggers inflammatory processes associated with oxidative stress and tissue damage linked to malignancy. LGM2605 is the synthetic lignan secoisolariciresinol diglucoside (SDG with free radical scavenging, antioxidant, and anti-inflammatory properties in diverse inflammatory cell and mouse models, including exposure to asbestos fibers. Nuclear factor-E2 related factor 2 (Nrf2 activation and boosting of endogenous tissue defenses were associated with the protective action of LGM2605 from asbestos-induced cellular damage. To elucidate the role of Nrf2 induction by LGM2605 in protection from asbestos-induced cellular damage, we evaluated LGM2605 in asbestos-exposed macrophages from wild-type (WT and Nrf2 disrupted (Nrf2−/− mice. Cells were pretreated with LGM2605 (50 µM and 100 µM and exposed to asbestos fibers (20 µg/cm2 and evaluated 8 h and 24 h later for inflammasome activation, secreted cytokine levels (interleukin-1β (IL-1β, interleukin-18 (IL-18, interleukin-6 (IL-6, and tumor necrosis factor alpha (TNFα, cytotoxicity and cell death, nitrosative stress, and Nrf2-regulated enzyme levels. Asbestos exposure induced robust oxidative and nitrosative stress, cell death and cytotoxicity, which were equally mitigated by LGM2605. Inflammasome activation was significantly attenuated in Nrf2−/− macrophages compared to WT, and the protective action of LGM2605 was seen only in WT cells. In conclusion, in a cell model of asbestos-induced toxicity, LGM2605 acts via protective mechanisms that may not involve Nrf2 activation.

  12. Synthetic Lignan Secoisolariciresinol Diglucoside (LGM2605) Reduces Asbestos-Induced Cytotoxicity in an Nrf2-Dependent and -Independent Manner

    Science.gov (United States)

    Pietrofesa, Ralph A.; Chatterjee, Shampa; Park, Kyewon; Arguiri, Evguenia; Albelda, Steven M.; Christofidou-Solomidou, Melpo

    2018-01-01

    Asbestos exposure triggers inflammatory processes associated with oxidative stress and tissue damage linked to malignancy. LGM2605 is the synthetic lignan secoisolariciresinol diglucoside (SDG) with free radical scavenging, antioxidant, and anti-inflammatory properties in diverse inflammatory cell and mouse models, including exposure to asbestos fibers. Nuclear factor-E2 related factor 2 (Nrf2) activation and boosting of endogenous tissue defenses were associated with the protective action of LGM2605 from asbestos-induced cellular damage. To elucidate the role of Nrf2 induction by LGM2605 in protection from asbestos-induced cellular damage, we evaluated LGM2605 in asbestos-exposed macrophages from wild-type (WT) and Nrf2 disrupted (Nrf2−/−) mice. Cells were pretreated with LGM2605 (50 µM and 100 µM) and exposed to asbestos fibers (20 µg/cm2) and evaluated 8 h and 24 h later for inflammasome activation, secreted cytokine levels (interleukin-1β (IL-1β), interleukin-18 (IL-18), interleukin-6 (IL-6), and tumor necrosis factor alpha (TNFα)), cytotoxicity and cell death, nitrosative stress, and Nrf2-regulated enzyme levels. Asbestos exposure induced robust oxidative and nitrosative stress, cell death and cytotoxicity, which were equally mitigated by LGM2605. Inflammasome activation was significantly attenuated in Nrf2−/− macrophages compared to WT, and the protective action of LGM2605 was seen only in WT cells. In conclusion, in a cell model of asbestos-induced toxicity, LGM2605 acts via protective mechanisms that may not involve Nrf2 activation. PMID:29498660

  13. Evaluation of asbestos fiber concentration in worker's breathing zone and atmosphere of an industrial environment

    International Nuclear Information System (INIS)

    Kheradpir, S.; Moztarzadeh, F.; Ghiaseddin, M.

    1997-01-01

    Occupational exposure to hazardous asbestos fibers on the basis of American Society for Testing and Materials criterion (length > 5mm, diameter 0.975,9 ). In addition, 8-h daily shift duration exposures on average are less than half of that observed in the 12-h shift. Test statistic with 95% confidence showed significant difference between mean exposure of daily shift durations (∝=0.05, t 0.95,17 )

  14. Remediation of asbestos in soil

    International Nuclear Information System (INIS)

    McFarland, Ross; Dangerfield, David

    2012-01-01

    The former Patea Freezing Works in the Tarankai region of New Zealand began as a canning plant and tallow factory in the late 1800s. Freezing technology was introduced in 1904 and was in continuous operation until 1982. Some of the structures were destroyed by fire in 2008, leaving metal, ash and asbestos. Fragments of Asbestos Containing Material (ACM) were blown over the local town and a large area of the site. A remedial strategy was developed by Aecom and they also provided validation services. . The preferred option was to remove the top layer of ACM impacted soil and place it in an engineered containment cell on site. However this process could not be used due to local cultural objections, and the 'dig and dump' option was adopted. The Western Australian Department of Health (DOH) Guidelines, May 2009, were used in collaboration with local district New Zealand Councils. Monitoring wells were installed, however the monitoring program is not yet underway as the revegetation program is not complete.

  15. Examination of Susceptibility to Libby Amphibole Asbestos-Induced Injury in Rat Models of Cardiovascular Disease

    Science.gov (United States)

    Although cardiovascular disease (CVD) is considered a risk factor for the exacerbation of air pollution health effects, no studies have been done assessing the influence of the disease on the development of lung injury induced by asbestos exposure. In this study we examined lung ...

  16. 77 FR 3798 - Asbestos in Construction Standard; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2012-01-25

    ... Construction Standard (29 CFR 1926.1101). The standard protects workers from adverse health effects from... standard protects workers from adverse health effects from occupational exposure to asbestos, including... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0002...

  17. Hygienic assessment of asbestos containing dust in the air of the working zone at thermal power plants

    Directory of Open Access Journals (Sweden)

    Moshkovskiy V.E.

    2016-09-01

    Full Text Available Asbestos and artificial mineral fibers were used actively at thermal power plants (TPP as heat insulation of pipes, seal plates, electrical insulation, etc. But content of asbestos fibers in the air of working zone at TPP was not registered to date. Therefore, aim of the work was to assess asbestos containing dust in the air of working zone at steam turbine and gas turbine TPP in the east region of the country. It was found that old insulation at TPP is mixture of asbestoses that contains chrysotile asbestos and traces of amphibole asbestoses – crocidolite and anthophyllite. In the majority of investigated workplaces at the steam turbine TPP significant dust generation with exceed of maximum one-time exposure limits (2 mg/m3 was observed. Concentration of respirable fibers in the air of working zone in all workplaces did not exceed actual hygienic standard (1 fiber/cm3.

  18. Assessment of LANL asbestos waste management documentation

    International Nuclear Information System (INIS)

    Davis, K.D.; Hoevemeyer, S.S.; Stirrup, T.S.; Jennrich, E.A.; Lund, D.M.

    1991-04-01

    The intent of this effort is to evaluate the Los Alamos National Laboratory (LANL) Waste Acceptance Criteria (WAC) for asbestos to determine if it meets applicable DOE, EPA, and OSHA requirements. There are numerous regulations that provide specific guidelines on the management of asbestos waste. An annotated outline for a generic asbestos WAC was developed using the type of information specified by 5820.2A. The outline itself is included in Appendix A. The major elements that should be addressed by the WAC were determined to be as follows: Waste Forms; Waste Content/Concentration; Waste Packaging; and Waste Documentation/Certification

  19. Mesothelioma among employees with likely contact with in-place asbestos-containing building materials.

    Science.gov (United States)

    Anderson, H A; Hanrahan, L P; Schirmer, J; Higgins, D; Sarow, P

    1991-12-31

    The occurrence of mesothelioma is a sentinel event in occupational and environmental disease. A mesothelioma surveillance system was established utilizing existing computerized Wisconsin vital statistics data maintained since 1959 and a Cancer Reporting System (CRS) established in 1978. Review of the death certificate listing of usual occupation and industry from 487 mesothelioma deaths in Wisconsin from 1959 to 1989 led to the investigation of 41 persons with likely exposure to inplace asbestos-containing building materials (ACBM): 12 school teachers, 10 school maintenance employees, 7 public building maintenance workers, 5 private building maintenance workers, and 7 commercial and factory workers performing maintenance activities. For 10 (34%) of the 29 maintenance workers the only source of asbestos exposure identified was their maintenance work. For five (17%) histories indicated some prior employment in occupations and industries with probable asbestos exposures. Opportunities for indirect occupational exposure were identified for ten who had been employed in the residential construction industry. One maintenance worker was exposed to asbestos in the household and another had neighborhood exposure. For 9 (75%) of the school teachers, the only identifiable potential source of asbestos exposure was derived from in-place ACBM in schools. One teacher had spent a season in the merchant marine aboard an iron ore-hauling ship and 2 had worked in the residential construction industry. Two of the teachers were sisters, and in two instances, two teachers had taught in the same school facility. We conclude that individuals occupationally exposed to in-place ACBM are at risk for the subsequent development of mesothelioma.

  20. 40 CFR 427.30 - Applicability; description of the asbestos paper (starch binder) subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos paper (starch binder) subcategory. 427.30 Section 427.30 Protection of Environment ENVIRONMENTAL... Asbestos Paper (Starch Binder) Subcategory § 427.30 Applicability; description of the asbestos paper... asbestos paper (starch binder). ...

  1. 40 CFR 427.70 - Applicability; description of the asbestos floor tile subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos floor tile subcategory. 427.70 Section 427.70 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos Floor Tile Subcategory § 427.70 Applicability; description of the asbestos floor tile subcategory... manufacture of asbestos floor tile. ...

  2. Microgel polymer composite fibres

    OpenAIRE

    Kehren, Dominic

    2014-01-01

    In this thesis some novel ideas and advancements in the field of polymer composite fibres, specifically microgel-based polymer composite fibres have been achieved. The main task was to investigate and understand the electrospinning process of microgels and polymers and the interplay of parameter influences, in order to fabricate reproducible and continuously homogenous composite fibres. The main aim was to fabricate a composite material which combines the special properties of polymer fibres ...

  3. Fun with Optical Fibres

    Science.gov (United States)

    Alti, Kamlesh

    2017-01-01

    Optical fibres play a very crucial role in today's technologies. Academic courses in optical fibres start at the undergraduate level. Nevertheless, student's curiosity towards optical fibres starts from the school level. In this paper, some fun experiments have been designed for both school and college students, which have some concrete…

  4. Special fibres and components

    DEFF Research Database (Denmark)

    Bunge, C.-A.; Woyessa, Getinet; Bremer, K.

    2017-01-01

    In this chapter we present more specific fibre types for particular applications. Starting with the multi-core fibre, which can be used as a substitution for ordinary SI-POF transmission fibres, but with better bending losses, over the ever increasing range of micro-structured POF for diverse sen...

  5. Asbestos free friction composition for brake linings

    Indian Academy of Sciences (India)

    WINTEC

    Abstract. An asbestos free friction material composite for brake linings is synthesized containing fibrous re- inforcing ... every manufacturer of automotive friction materials uses phenolics as ... The resin binder is a critical compo- nent. The limits ...

  6. Asbestos-Containing Materials (ACM) and Demolition

    Science.gov (United States)

    There are specific federal regulatory requirements that require the identification of asbestos-containing materials (ACM) in many of the residential buildings that are being demolished or renovated by a municipality.

  7. Asbestos Standard for the Construction Industry

    National Research Council Canada - National Science Library

    1995-01-01

    .... In the construction industry, asbestos is found in installed products such as shingles, floor tiles, cement pipe and sheet, roofing felts, insulation, ceiling tiles, fire-resistant drywall, and acoustical products...

  8. Microarray data and gene expression statistics for Saccharomyces cerevisiae exposed to simulated asbestos mine drainage

    Directory of Open Access Journals (Sweden)

    Heather E. Driscoll

    2017-08-01

    Full Text Available Here we describe microarray expression data (raw and normalized, experimental metadata, and gene-level data with expression statistics from Saccharomyces cerevisiae exposed to simulated asbestos mine drainage from the Vermont Asbestos Group (VAG Mine on Belvidere Mountain in northern Vermont, USA. For nearly 100 years (between the late 1890s and 1993, chrysotile asbestos fibers were extracted from serpentinized ultramafic rock at the VAG Mine for use in construction and manufacturing industries. Studies have shown that water courses and streambeds nearby have become contaminated with asbestos mine tailings runoff, including elevated levels of magnesium, nickel, chromium, and arsenic, elevated pH, and chrysotile asbestos-laden mine tailings, due to leaching and gradual erosion of massive piles of mine waste covering approximately 9 km2. We exposed yeast to simulated VAG Mine tailings leachate to help gain insight on how eukaryotic cells exposed to VAG Mine drainage may respond in the mine environment. Affymetrix GeneChip® Yeast Genome 2.0 Arrays were utilized to assess gene expression after 24-h exposure to simulated VAG Mine tailings runoff. The chemistry of mine-tailings leachate, mine-tailings leachate plus yeast extract peptone dextrose media, and control yeast extract peptone dextrose media is also reported. To our knowledge this is the first dataset to assess global gene expression patterns in a eukaryotic model system simulating asbestos mine tailings runoff exposure. Raw and normalized gene expression data are accessible through the National Center for Biotechnology Information Gene Expression Omnibus (NCBI GEO Database Series GSE89875 (https://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE89875.

  9. Asbestos in seashore Southern area of Bari

    International Nuclear Information System (INIS)

    Giua, R.; Bonanno, V.; Gagliardi, N.

    2006-01-01

    Bari seashore was place, in the past, of uncontrolled waste disposal. The importance of such situation became evident when Bari Municipal Administration attempted the recovery of Torre Quetta beach. Sampling and analysis in the area showed the presence of quantities of asbestos residues probably coming from Fibronit, an asbestos-cement industry in Bari closed since 1985 and, at present, polluted site of national relevance [it

  10. ILO to promote global asbestos ban.

    Science.gov (United States)

    O'Neill, Rory

    2006-01-01

    The International Labour Office (ILO) is to pursue a global ban on asbestos, the world's biggest ever industrial killer. The landmark decision came with the adoption of a resolution on 14 June 2006 at the ILO conference in Geneva and followed a high level union campaign. Rory O'Neill asked Jukka Takala, director of ILO's Safe Work program, what ILO will now do to help make the world asbestos-free.

  11. Pleuroparenchymal Lung Disease Secondary to Nonoccupational Exposure to Vermiculite

    Directory of Open Access Journals (Sweden)

    Fahad Al-Ghimlas

    2007-01-01

    Full Text Available An unusual case of pleuroparenchymal lung disease caused by the inhalation of vermiculite dust, presumably containing asbestos fibers is described. The uniqueness of the case lies in the very indirect nature of exposure – the wife of a factory owner, rather than a worker exposed to asbestos, whose factory manufactured vermiculite. The present case illustrates the importance of taking careful occupational histories of all household members when presented with a patient whose chest radiograph exhibits features consistent with asbestos exposure.

  12. Mesothelioma mortality in Europe: impact of asbestos consumption and simian virus 40

    Directory of Open Access Journals (Sweden)

    Rehak Peter

    2006-11-01

    Full Text Available Abstract Background It is well established that asbestos is the most important cause of mesothelioma. The role of simian virus 40 (SV40 in mesothelioma development, on the other hand, remains controversial. This potential human oncogene has been introduced into various populations through contaminated polio vaccines. The aim of this study was to investigate whether the possible presence of SV40 in various European countries, as indicated either by molecular genetic evidence or previous exposure to SV40-contaminated vaccines, had any effect on pleural cancer rates in the respective countries. Methods We conducted a Medline search that covered the period from January 1969 to August 2005 for reports on the detection of SV40 DNA in human tissue samples. In addition, we collected all available information about the types of polio vaccines that had been used in these European countries and their SV40 contamination status. Results Our ecological analysis confirms that pleural cancer mortality in males, but not in females, correlates with the extent of asbestos exposure 25 – 30 years earlier. In contrast, neither the presence of SV40 DNA in tumor samples nor a previous vaccination exposure had any detectable influence on the cancer mortality rate in neither in males (asbestos-corrected rates nor in females. Conclusion Using the currently existing data on SV40 prevalence, no association between SV40 prevalence and asbestos-corrected male pleural cancer can be demonstrated.

  13. Asbestos: the measures taken by CERN

    CERN Multimedia

    2005-01-01

    Recently, the Canton's Department for Installation, Equipment, and Housing launched a survey into the presence of asbestos in buildings built in Geneva before 1991. Their initial findings have caused some concern to the public, with buildings and landmarks such as the TSR Tower, the Temple de la Madeleine, and the Cathedral of Saint-Pierre all found to contain asbestos. Several employees here also contacted the Bulletin to find out more about CERN's approach in dealing with asbestos. In the 1960s, asbestos' use was widespread. Its low cost and attractive properties made it a popular choice for insulating buildings. It was used in buildings throughout the world, including many at CERN. However, since the 1970s the use of asbestos has been gradually limited. In France, the first specific rules for the protection of workers came about in 1977. Since then, its use was limited more and more, under pressure from European directives. Finally, a European directive in 1999 widened the ban on asbestos. It covered ...

  14. Photonic Crystal Fibres

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Broeng, Jes; Sanchez Bjarklev, Araceli

    Photonic crystal fibres represent one of the most active research areas today in the field of optics. The diversity of applications that may be addressed by these fibres and their fundamental appeal, by opening up the possibility of guiding light in a radically new way compared to conventional...... optical fibres, have spun an interest from almost all areas of optics and photonics. The aim of this book is to provide an understanding of the different types of photonic crystal fibres and to outline some of the many new and exciting applications that these fibres offer. The book is intended for both...

  15. Fibre illumination system

    DEFF Research Database (Denmark)

    2012-01-01

    Source: EP2426402A The invention relates to a fibre illumination module and system for the collection and delivery of daylight for illumination purposes. The fibre illumination module comprises a plurality of collector elements, each collector element comprising an input fibre having a first end......-directional arrangement. The fibre illumination system comprises a fibre illumination module of the above-mentioned type. By the invention, daylight may be exploited for the illumination of remote interior spaces of buildings in order to save energy, and improve the well-being of users in both housing and working...

  16. Rehabilitation of asbestos mining waste: a Rehabilitation Prioritisation Index (RPI) for South Africa

    Science.gov (United States)

    van Rensburg, L.; Claassens, S.; Bezuidenhout, J. J.; Jansen van Rensburg, P. J.

    2009-03-01

    The much publicised problem with major asbestos pollution and related health issues in South Africa, has called for action to be taken to negate the situation. The aim of this project was to establish a prioritisation index that would provide a scientifically based sequence in which polluted asbestos mines in Southern Africa ought to be rehabilitated. It was reasoned that a computerised database capable of calculating such a Rehabilitation Prioritisation Index (RPI) would be a fruitful departure from the previously used subjective selection prone to human bias. The database was developed in Microsoft Access and both quantitative and qualitative data were used for the calculation of the RPI value. The logical database structure consists of a number of mines, each consisting of a number of dumps, for which a number of samples have been analysed to determine asbestos fibre contents. For this system to be accurate as well as relevant, the data in the database should be revalidated and updated on a regular basis.

  17. Eco-friendly asbestos free brake-pad: Using banana peels

    Directory of Open Access Journals (Sweden)

    U.D. Idris

    2015-07-01

    Full Text Available The use of asbestos fibre is being avoided due to its carcinogenic nature that might cause health risks. A new brake pad produced using banana peel waste to replace asbestos and Phenolic resin (phenol formaldehyde, as a binder was investigated. The resin was varying from 5 to 30 wt% with an interval of 5 wt%. Morphology, physical, mechanical and wear properties of the brake pad were studied. The results show that compressive strength, hardness and specific gravity of the produced samples were seen to be increasing with an increase in wt% of resin addition, while oil soak, water soak, wear rate and percentage charred decreased as the wt% of resin increased. Overall samples, containing 25 wt% in uncarbonized banana peels (BUNCp and 30 wt% in carbonized (BCp gave better properties. The result of this research indicates that banana peel particles can be effectively used as a replacement for asbestos in brake pad manufacture.

  18. Corporate corruption of science-Another asbestos example.

    Science.gov (United States)

    Egilman, David; Monárrez, Rubén

    2017-02-01

    Kelsh et al. [2007]: Occup Med (Lond) 57:581-589 published a paper reanalyzing one of the few data sources publicly available on mesothelioma amongst brake workers, the Australian Mesothelioma Surveillance Registry (AMSR). This reanalysis was commissioned by lawyers representing the automobile manufacturing companies and did not align with an independent analysis published by Leigh and Driscoll [2003]: Occup Environ Health 9:206-217. We sought to reevaluate the AMSR data ourselves to understand how the company-sponsored research categorized the data. In our re-analysis of the 78 brake-related folios in the AMSR, we determined that 57 were employed brake mechanics, 35 were employed brake mechanics with no other asbestos exposure besides brake work or repair, and 41 of these cases had no other asbestos exposure besides brake work or repair. Our classifications differed significantly from Kelsh et al. We discuss how Kelsh et al. methodically reduced the relevant cases by following overly stringent criteria for inclusion. Am. J. Ind. Med. 60:152-162, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  19. Fibre optics compatibility with radiative environment inside PWR containment

    International Nuclear Information System (INIS)

    Breuze, G.; Jucker, P.; Serre, J.

    1993-01-01

    Fibre optic links operating with multiplexed sensors data are potentially attractive for nuclear power plant applications. It hence became essential to test for radiation vulnerability not only transmission support -fibres- but also fibre-end electro-optical components which could be exposed to hostile environment, perhaps in worse conditions than fibres. Present paper gives results of multimode silica-based fibre behaviour during long-term steady-state low dose-rate gamma ray exposure - one year under 0.1 to 0.2 Gy/h. Studies concerned radiation-induced loss (ΔL) measurement of eight different commercially available fibres and bit error-rate (BER) recording of four 1 100 m length data links operating with a 100 m part exposed to gamma-rays. Main result is the good behaviour of pure silica-core fibres, especially a step-index polymer-clad fibre transmitting 850 nm light but also a graded-index fluorine-clad fibre for 1 300 nm window. Mean ΔL values are respectively 3 dB/km and 4.5 dB/km at the exposure end. Complementary result is no influence of gamma-ray exposure upon data link initial 10 -9 BER. (authors). 9 figs., 7 tabs., 26 refs

  20. History of Asbestos Ban in Hong Kong

    Directory of Open Access Journals (Sweden)

    Chun-Kwan Wong

    2017-10-01

    Full Text Available As millions of immigrants moved to Hong Kong (HK from China in the recent decades, large amount of residential housings were built in the early years and a substantial proportion of those buildings used asbestos-containing materials (ACMs. Since the number of new cases of ARDs diagnosed has increased year by year since 1990’s, the remarkable increase of incidences had drawn the attention of the public and most importantly the HK government. It became one of the trigger points leading to asbestos ban in HK history. Comparatively, non-governmental organizations (NGOs, labor unions and patients’ self-help organizations demonstrated a more aggressive and proactive attitude than the HK government and have played a key role in the development of asbestos banning policy in HK. After numerous petitions and meetings with the government representatives by those parties in the past decade, the HK government eventually changed its attitude and started to consider terminating the endless threat from asbestos by amending the policy, and the new clause of legislation for banning of all forms of asbestos was enacted on 4 April 2014. Other than the restriction of asbestos use, the compensation system about ARDs has also made some great moves by the effort of those parties as well. Based on the experience we learnt through the years, efforts from different stakeholders including patients’ self-help organizations, NGOs, legislative councilors, and media power are absolutely essential to the success of progression and development in today’s asbestos banning in HK.

  1. Gene expression profiles in asbestos-exposed epithelial and mesothelial lung cell lines

    Directory of Open Access Journals (Sweden)

    Kaski Samuel

    2007-03-01

    Full Text Available Abstract Background Asbestos has been shown to cause chromosomal damage and DNA aberrations. Exposure to asbestos causes many lung diseases e.g. asbestosis, malignant mesothelioma, and lung cancer, but the disease-related processes are still largely unknown. We exposed the human cell lines A549, Beas-2B and Met5A to crocidolite asbestos and determined time-dependent gene expression profiles by using Affymetrix arrays. The hybridization data was analyzed by using an algorithm specifically designed for clustering of short time series expression data. A canonical correlation analysis was applied to identify correlations between the cell lines, and a Gene Ontology analysis method for the identification of enriched, differentially expressed biological processes. Results We recognized a large number of previously known as well as new potential asbestos-associated genes and biological processes, and identified chromosomal regions enriched with genes potentially contributing to common responses to asbestos in these cell lines. These include genes such as the thioredoxin domain containing gene (TXNDC and the potential tumor suppressor, BCL2/adenovirus E1B 19kD-interacting protein gene (BNIP3L, GO-terms such as "positive regulation of I-kappaB kinase/NF-kappaB cascade" and "positive regulation of transcription, DNA-dependent", and chromosomal regions such as 2p22, 9p13, and 14q21. We present the complete data sets as Additional files. Conclusion This study identifies several interesting targets for further investigation in relation to asbestos-associated diseases.

  2. Exposure to dust mixtures containing free crystalline silica and mineral fibers

    International Nuclear Information System (INIS)

    Wozniak, H.; Wiecek, E.; Bielichowska-Cybula, G.

    1996-01-01

    Exposure to dust mixture containing at the same time respirable mineral fibres and free crystalline silica may occur in Poland in mines and in the Lower Silesia plants processing mineral raw materials as well as in all plants which use asbestos products and MMMF. Workposts where thermal insulation is exchange with possible phase transformations during operations under conditions of high temperature, expose particularly complex problems. In the work environment of this kind, dust concentration of free crystalline silica becomes important but not sufficient criterion for evaluating working conditions and it may be misleading. A range of studies indispensable for the proper evaluation of exposure to dust, covering together with measurement of dust and SiO 2 concentrations, determination of the mineral composition of dust, was developed. It was also found that the acceptable level of risk for neoplastic disease, namely 10(-3) can be attained in the work environment only if the concentration ranges from 0.05 to 0.1 f/cm 3 , that is equal to 20% of MAC value which is now binding in Poland. Cancer risk (lung cancer and mesothelioma jointly) during a 20-year exposure to concentrations equal to present MAC values should be estimated as about 10(-2) what indicates that risk is too high and it is necessary to diminish MAC values for asbestos dust. (author). 17 refs, 3 tabs

  3. Asbestos: A Lingering Danger. AIO Red Paper #20.

    Science.gov (United States)

    Malcolm, Stuart

    Its unique qualities makes asbestos extremely useful in industry, yet it is termed one of the most dangerous and insidious substances in the work place. Composed of mostly fibers, asbestos is readily freed into the atmosphere during handling, constituting a real health risk. There are two ways asbestos can enter the human body: by inhalation or…

  4. Asbestos induced oxidative injury to DNA.

    Science.gov (United States)

    Mahmood, N; Khan, S G; Ali, S; Athar, M; Rahman, Q

    1993-06-01

    DNA-damaging effects of asbestos in the presence of organic peroxides and hydroperoxides were investigated. The destabilization of the secondary structure of DNA, damage to deoxyribose sugar and DNA fidelity were measured, respectively, by S-1 nuclease hydrolysis, the formation of thiobarbituric acid (TBA)-reacting species and a melting temperature (Tm) profile using calf thymus DNA. S-1 nuclease hydrolysis and Tm determinations have shown that the presence of benzoylperoxide (BOOB), cumene hydroperoxide (COOH) or tertiary-butyl hydroperoxide (t-BOOH) increased asbestos-mediated DNA damage by a large factor compared either to asbestos alone or to peroxide or hydroperoxide alone. However, no formation of TBA-reacting species could be observed in this system. The quenchers of reactive oxygen species (ROS) afforded protection against DNA damage. These results suggest that asbestos in the presence of organic peroxides and hydroperoxides damage the DNA which is mediated by the generation of oxygen free radicals. The significance of these results in relation to the development of cancer of the respiratory tract among the asbestos exposed population is discussed.

  5. HIPPI and Fibre Channel

    International Nuclear Information System (INIS)

    Tolmie, D.E.

    1992-01-01

    The High-Performance Parallel Interface (HIPPI) and Fibre Channel are near-gigabit per second data communications interfaces being developed in ANSI standards Task Group X3T9.3. HIPPI is the current interface of choice in the high-end and supercomputer arena, and Fibre Channel is a follow-on effort. HIPPI came from a local area network background, and Fibre Channel came from a mainframe to peripheral interface background

  6. Lung Function Impairment in Relation to Asbestos-Induced Pleural Lesions with Reference to the Extent of the Lesions and the Initial Parenchymal Fibrosis.

    Czech Academy of Sciences Publication Activity Database

    Lebedová, J.; Dlouhá, B.; Rychlá, L.; Neuwirth, J.; Brabec, Marek; Pelclová, D.; Fenclová, Z.

    2003-01-01

    Roč. 29, č. 5 (2003), s. 388-395 ISSN 0355-3140 Source of funding: V - iné verejné zdroje Keywords : asbestos exposure * asbestos-induced pleural lesion * asbestosis * lung function impairmentp * arenchymal fibrosis * pleural change * pleural thickening * ventilation impairment Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 1.816, year: 2003 http://www.jstor.org/stable/40967314

  7. Tritiated thymidine incorporation and the development of an interstitial lesion in the bronchiolar-alveolar regions of the lungs of normal and complement deficient mice after inhalation of chrysotile asbestos

    International Nuclear Information System (INIS)

    McGavran, P.D.; Butterick, C.J.; Brody, A.R.

    1989-01-01

    Inhaled asbestos causes the proliferation of bronchiolar-alveolar epithelial and interstitial cells in rats and mice 19 to 72 hours after a single 5-hour exposure. This condition is associated with rapid macrophage accumulation and development of an interstitial fibrotic lesion at alveolar duct bifurcations. In an attempt to define the mechanisms mediating asbestos-induced cell proliferation and fibrogenesis, we studied mice exposed to chrysotile asbestos for five hours. The mice were normal and a congenic strain (B10.D2/oSn), deficient in the fifth component of complement (C5-). We knew that the latter exhibit a depressed asbestos-induced macrophage response and wanted to learn whether the depressed response correlated with measurements of cell proliferation and progression of an interstitial lesion. Sections of first alveolar duct bifurcations were prepared for light microscopic autoradiography and ultrastructural morphometry at varying times after animal exposure to asbestos. In sham-exposed C5+ and C5- animals, less than 1% of epithelial and interstitial cells of the terminal bronchioles and alveolar ducts incorporated tritiated thymidine (3H-TdR) at any time after exposure to asbestos. Between 19 and 72 hours after exposure, epithelial and interstitial cells in both strains of mice exhibited significantly increased levels of 3H-TdR incorporation. The response decreased by eight days postexposure, and 3H-TdR incorporation was normal one month after exposure. Similarly, morphometry showed that both the C5+ and C5- asbestos-exposed mice exhibited significant increases in the volume density of epithelial and interstitial cells 48 hours after exposure. However, one month after exposure, the normal C5+ asbestos-exposed mice developed a fibrotic lesion, whereas the C5- asbestos-exposed animals were no different from sham-exposed C5- controls

  8. Mesothelioma incidence in the neighbourhood of an asbestos-cement plant located in a national priority contaminated site

    Directory of Open Access Journals (Sweden)

    Lucia Fazzo

    2014-12-01

    Full Text Available BACKGROUND: An epidemic of asbestos-related disease is ongoing in most industrialized countries, mainly attributable to past occupational exposure but partly due to environmental exposure. In this perspective, the incidence of pleural mesothelioma close to a former asbestos-cement plant in a national contaminated site was estimated. METHODS: The census-tracts interested by atmospheric dispersion of facilities in the contaminated site were identified. Two subareas with different estimated environmental asbestos impact were distinguished. An ecological study at micro-geographic level was performed. The standardized incidence ratios (SIR for study area and the two subareas, in comparison with region and municipality were computed. The standardized incidence rate ratio (IRR between the two subareas was computed. RESULTS: Mesothelioma incidence in the study area was increased: 46 cases were observed with respect to 22.23 expected (SIR: 2.02. The increase was confirmed in analysis considering only the subjects without an occupationally exposure to asbestos: 19 cases among men (SIR = 2.48; 95% CI: 1.49-3.88; 11 case among women (SIR = 1.34; 95% CI: 0.67-2.40. The IRR between the two subareas is less than one in overall population considering all age-classes and of 3 fold (IRR = 3.14, 95% CI: 0.65-9.17 in the age-classes below 55 years. CONCLUSIONS: The findings indicate an increased incidence of pleural mesothelioma in the neighbourhood of asbestos-cement plant, and a possible etiological contribution of asbestos environmental exposure in detected risks.

  9. Fibre-concrete container

    International Nuclear Information System (INIS)

    2000-01-01

    In this leaflet the fibre-concrete container for radioactive wastes is described. The fibre container is made of fibre-concrete that contains cement, aggregate, sand, filter, flame-silica, super-plastificator, water and scattered metal fibres. The fibre-concrete container has a dice shape with outer dimension 1.7 x 1.7 x 1.7 m. It is mounted of a container body, a container cover and two caps. Total weight of container is 4,240 kg, maximum weight of loaded container do not must exceed 15,000 kg. The physical and mechanical properties of the fibre-concrete container are described in detail. The fibre-concrete container manufactured for storing of low and intermediate radioactive wastes. A fibre-concrete container utilization to store of radioactive wastes solves these problems: increase of stability of stored packages of radioactive waste; watertightness within 300 years at least; static stability of bearing space; better utilization of bearing spaces; insulation of radioactive waste in a case of seismic and geological event; increase of fire resistance; and transport of radioactive waste

  10. POLARISATION PRESERVING OPTICAL FIBRE

    DEFF Research Database (Denmark)

    2000-01-01

    . This cladding structure provides polarisation preserving properties to the optical fibre. Optical fibres using this technology may have claddings with elements placed non-periodically as well as in a two-dimensional periodic lattice - such as cladding providing Photonic Band Gap (PBG) effects....

  11. Identification of rounded atelectasis in workers exposed to asbestos by contrast helical computed tomography

    International Nuclear Information System (INIS)

    Terra-Filho, M.; Kavakama, J.; Bagatin, E.; Capelozzi, V.L.; Nery, L.E.; Tavares, R.

    2003-01-01

    Rounded atelectasis (RA) is a benign and unusual form of sub pleural lung collapse that has been described mostly in asbestos-exposed workers. This form of atelectasis manifests as a lung nodule and can be confused with bronchogenic carcinoma upon conventional radiologic examination. The objective of the present study was to evaluate the variation in contrast uptake in computed tomography for the identification of asbestos-related RA in Brazil. Between January 1998 and December 2000, high-resolution computed tomography (HRCT) was performed in 1658 asbestos-exposed workers. The diagnosis was made in nine patients based on a history of prior asbestos exposure, the presence of characteristic (HRCT) findings and lesions unchanged in size over 2 years or more. In three of them the diagnosis was confirmed during surgery. The dynamic contrast enhancement study was modified to evaluate nodules and pulmonary masses. All nine patients with R A received iodide contrast according to weight. The average enhancement after iodide contrast was infused, reported as Hounsfield units (HU), increased from 62.5±9.7 to 125.4±20.7 (P < 0.05), with a mean enhancement of 62.5±19.7 (range 40 to 89) and with a uniform dense opacification. In conclusion, in this study all patients with R A showed contrast enhancement with uniform dense opacification. The main clinical implication of this finding is that this procedure does not permit differentiation between RA and malignant pulmonary neoplasm. (author)

  12. Pure chiral optical fibres.

    Science.gov (United States)

    Poladian, L; Straton, M; Docherty, A; Argyros, A

    2011-01-17

    We investigate the properties of optical fibres made from chiral materials, in which a contrast in optical activity forms the waveguide, rather than a contrast in the refractive index; we refer to such structures as pure chiral fibres. We present a mathematical formulation for solving the modes of circularly symmetric examples of such fibres and examine the guidance and polarisation properties of pure chiral step-index, Bragg and photonic crystal fibre designs. Their behaviour is shown to differ for left- and right-hand circular polarisation, allowing circular polarisations to be isolated and/or guided by different mechanisms, as well as differing from equivalent non-chiral fibres. The strength of optical activity required in each case is quantified.

  13. FibreBags vs. FibreCaps for acid and neutral detergent fibre analysis

    OpenAIRE

    Koivisto , Jason

    2003-01-01

    International audience; A new procedure for determining acid detergent fibre and neutral detergent fibre (ADF and NDF) was developed to reduce the need for filtration and to allow for batch processing of forage samples. The FibreBag system is an economically necessary evolution of the earlier FibreCap system. The purpose of this enquiry was to determine if the FibreBag is a suitable replacement for the FibreCap. The FibreBag method produced very similar results to the FibreCap system of analy...

  14. 40 CFR 427.20 - Applicability; description of the asbestos-cement sheet subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos-cement sheet subcategory. 427.20 Section 427.20 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos-Cement Sheet Subcategory § 427.20 Applicability; description of the asbestos-cement sheet... asbestos, Portland cement, silica, and other ingredients are used in the manufacturing of asbestos-cement...

  15. 40 CFR 427.10 - Applicability; description of the asbestos-cement pipe subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos-cement pipe subcategory. 427.10 Section 427.10 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos-Cement Pipe Subcategory § 427.10 Applicability; description of the asbestos-cement pipe... asbestos. Portland cement, silica and other ingredients are used in the manufacturing of asbestos-cement...

  16. Penetration of asbestos fibers in respirator filters

    International Nuclear Information System (INIS)

    Cheng, Yung-Sung; Pearson, S.D.; Rohrbacher, K.D.; Yeh, Hsu-Chi.

    1994-01-01

    Currently, the health risks associated with asbestos have restricted its use and created a growing asbestos abatement industry with a need for respirator filters that are effective for worker protection. The main purpose of this project is to determine the influence of fiber size, electrostatic charge, and flow rate on the penetration of asbestos fibers in respirator filter cartridges. The study includes four types of filters each tested at two flow rates: the AO-R57A, a dual cartridge HEPA filter tested at 16 and 42.5 L/min; the MSA-S, a dust and mist filter tested at 16 and 42.5 L/min; the MSA-A power filter tested at 32 and 85 L/min; and the 3M-8710, a low-efficiency disposable face mask filter tested at 32 and 85 L/min. The three types of asbestos fibers used (amosite, crocidolite, and chrysotile) ranged in length from 0.04-0.5 μm and in aspect ratio (ratio of length to diameter) from 3 to 60. The fibers were used in both charged and neutralized forms. The results from amosite fibers are reported here

  17. 29 CFR 1915.1001 - Asbestos.

    Science.gov (United States)

    2010-07-01

    ..., disposal, storage, containment of and housekeeping activities involving asbestos or products containing... I, II, and III activities. Clean room means an uncontaminated room having facilities for the storage... system designed to capture the dust cloud created by the compressed air. (iii) Dry sweeping, shoveling or...

  18. 29 CFR 1926.1101 - Asbestos.

    Science.gov (United States)

    2010-07-01

    ..., grinding or other method that breaks, crumbles, or disintegrates intact ACM. Amended water means water to... by this standard, even though the general contractor is not qualified to serve as the asbestos... months of the current or projected job, the monitoring and analysis were performed in compliance with the...

  19. 29 CFR 1910.1001 - Asbestos.

    Science.gov (United States)

    2010-07-01

    ... dust cloud created by the compressed air. (x) Flooring. Sanding of asbestos-containing flooring... employer ceases to do business and there is no successor employer to receive and retain the records for the... written justification for the need to use the 37-mm filter cassette accompanies the sample results in the...

  20. Asbestos free friction composition for brake linings

    Indian Academy of Sciences (India)

    An asbestos free friction material composite for brake linings is synthesized containing fibrous reinforcing constituents, friction imparting and controlling additives, elastomeric additives, fire retarding components and a thermosetting resin. The composite shows exemplary friction characteristics and has great resistance to ...

  1. Asbestos: a hidden player behind the cholangiocarcinoma increase? Findings from a case?control analysis

    OpenAIRE

    Brandi, Giovanni; Di Girolamo, Stefania; Farioli, Andrea; de Rosa, Francesco; Curti, Stefania; Pinna, Antonio Daniele; Ercolani, Giorgio; Violante, Francesco Saverio; Biasco, Guido; Mattioli, Stefano

    2013-01-01

    Purposes We conducted a case?control analysis to explore the association between occupational exposure to asbestos and cholangiocarcinoma (CC). Methods The study was based on historical data from 155 consecutive patients with CC [69 intrahepatic CC (ICC) and 86 extrahepatic CC (ECC)] referred to Sant?Orsola-Malpighi University Hospital between 2006 and 2010. The cases were individually matched by calendar period of birth, sex, and region of residence to historical hospital and population cont...

  2. Durability of cracked fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Nielsen, Laila

    1997-01-01

    (capillary water uptake) is used, involving an in-situ method and a laboratory method. Three different concrete qualities as well as steel fibres (ZP) and polypropylene fibres (PP) are used. Results of the durability tests on cracked FRC-beams are compared to results for uncracked FRC-beams and beams without......Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to il-point bending until a predefined crack width is reached, using a newly developed test setup. As environmental load, exposure to water...

  3. The Synthetic Lignan Secoisolariciresinol Diglucoside Prevents Asbestos-Induced NLRP3 Inflammasome Activation in Murine Macrophages

    Directory of Open Access Journals (Sweden)

    Ralph A. Pietrofesa

    2017-01-01

    Full Text Available Background. The interaction of asbestos with macrophages drives two key processes that are linked to malignancy: (1 the generation of reactive oxygen species (ROS/reactive nitrogen species (RNS and (2 the activation of an inflammation cascade that drives acute and chronic inflammation, with the NLRP3 inflammasome playing a key role. Synthetic secoisolariciresinol diglucoside (SDG, LGM2605, is a nontoxic lignan with anti-inflammatory and antioxidant properties and was evaluated for protection from asbestos in murine peritoneal macrophages (MF. Methods. MFs were exposed to crocidolite asbestos ± LGM2605 given 4 hours prior to exposure and evaluated at various times for NLRP3 expression, secretion of inflammasome-activated cytokines (IL-1β and IL-18, proinflammatory cytokines (IL-6, TNFα, and HMGB1, NF-κB activation, and levels of total nitrates/nitrites. Results. Asbestos induces a significant (p<0.0001 increase in the NLRP3 subunit, release of proinflammatory cytokines, NLRP3-activated cytokines, NF-κB, and levels of nitrates/nitrites. LGM2605 significantly reduced NLRP3 ranging from 40 to 81%, IL-1β by 89–96%, and TNFα by 67–78%, as well as activated NF-κB by 48-49% while decreasing levels of nitrates/nitrites by 85–93%. Conclusions. LGM2605 reduced asbestos-induced NLRP3 expression, proinflammatory cytokine release, NF-κB activation, and nitrosative stress in MFs supporting its possible use in preventing the asbestos-induced inflammatory cascade leading to malignancy.

  4. Fibre optic microarrays.

    Science.gov (United States)

    Walt, David R

    2010-01-01

    This tutorial review describes how fibre optic microarrays can be used to create a variety of sensing and measurement systems. This review covers the basics of optical fibres and arrays, the different microarray architectures, and describes a multitude of applications. Such arrays enable multiplexed sensing for a variety of analytes including nucleic acids, vapours, and biomolecules. Polymer-coated fibre arrays can be used for measuring microscopic chemical phenomena, such as corrosion and localized release of biochemicals from cells. In addition, these microarrays can serve as a substrate for fundamental studies of single molecules and single cells. The review covers topics of interest to chemists, biologists, materials scientists, and engineers.

  5. New generation of optical fibres

    Energy Technology Data Exchange (ETDEWEB)

    Dianov, E M; Semjonov, S L; Bufetov, I A [Fiber Optics Research Center, Russian Academy of Sciences, Moscow (Russian Federation)

    2016-01-31

    The growing need for information in contemporary society is the motivating force behind the development of fibre optics in general and optical fibre communications in particular. Intensive research effort has been concentrated on designing new types of optical fibres and extending their application field. This paper reviews results of research on new types of optical fibres: bismuthdoped active fibres, multicore fibres and hollow-core fibres, which can be used as key components of systems that ensure further increase in optical information transfer rate. (invited paper)

  6. Alterações pleurais e parenquimatosas relacionadas com a exposição ao asbesto: Ensaio pictórico

    Directory of Open Access Journals (Sweden)

    G.S.P. Meirelles

    2005-09-01

    Full Text Available Resumo: As alterações pleurais e pulmonares decorrentes da exposição ao asbesto podem ser benignas, como o derrame e as placas pleurais, ou malignas, como o carcinoma de pulmão e o mesotelioma pleural. O derrame pleural é a manifestação mais comum nos primeiros anos após a exposição e os aspectos de imagem são incaracterísticos. O espessamento pleural difuso compromete a pleura visceral, não sendo específico da exposição ao asbesto. As placas pleurais, espessamentos focais da pleura, são consideradas marcadores de exposição. A asbestose corresponde à fibrose do parênquima pulmonar pelo asbesto, predominando nos lobos inferiores, e a atelectasia redonda a um colapso pulmonar periférico, geralmente associado a alterações pleurais. O carcinoma pulmonar e o mesotelioma pleural são mais prevalentes em indivíduos expostos. O objectivo deste estudo é ilustrar as principais alterações de imagem das alterações relacionadas com o asbesto.Rev Port Pneumol 2005; XI (5: 477-485 Abstract: Pleural and pulmonary asbestos-related diseases range from benign conditions, like pleural effusion and pleural plaques, to some neoplasias, such as lung cancer and malignant mesothelioma. Pleural effusion is the earliest finding after asbestos exposure, but the imaging findings are not specific. Diffuse pleural thickening involves the visceral pleura and pleural plaques are considered to be hallmarks of exposure. Asbestosis is the pulmonary fibrosis due to asbestos. Rounded atelectasis is a peripheral lung collapse in these individuals, generally related to pleural disease. Some neoplasias, like lung carcinoma and pleural mesothelioma, are more prevalent in asbestos-exposed subjects. The aim of this essay is to illustrate the main imaging findings of asbestos-related diseases.Rev Port Pneumol 2005; XI (5: 477-485 Palavras-chave: Asbesto, pneumoconioses, doenças ocupacionais

  7. DETECTORS: scintillating fibres

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    In the continual search for improved detection techniques, new materials are continually proving profitable. A good example is scintillating plastic fibres - tiny transparent threads sometimes finer than a human hair which transmit light. The narrowness and flexibility of these fibres was a major breakthrough for endoscopy - non-invasive techniques for viewing the otherwise inaccessible in surgery or machine inspection. In a more sophisticated form, these fibres find ready application in communications technology, where the goal is to transmit information rather than electrical power, replacing conventional and unwieldy current-carrying wire conductors. In particle physics, fibres have long been used to take the tiny scintillations produced when high energy particles hit fluorescent materials and 'conduct' them to photosensitive detectors some distance away

  8. Experience of Japan in Achieving a Total Ban on Asbestos

    Directory of Open Access Journals (Sweden)

    Sugio Furuya

    2017-10-01

    Full Text Available This paper aims to examine the process through which a total ban on asbestos was achieved in Japan. We reconstructed the process, analyzed the roles of involved parties/events, and drew lessons from the Japanese experience of achieving the ban. In Japan, a bill to phase out asbestos was proposed in 1992 but rejected without deliberation. Wide support for such a ban subsequently grew, however, largely due to the actions of trade unions and civil societies in establishing a coalition, raising awareness, organizing asbestos victims and their families, and propagating information on international developments. A governmental decision towards a ban was made in 2002 based on several national and international factors. A huge asbestos scandal in 2005 preponed the achievement of a total ban and led to the establishment of comprehensive measures to tackle asbestos issues. However, challenges remain for the elimination of asbestos-related diseases.

  9. Fibre Concrete 2017

    Science.gov (United States)

    2017-09-01

    9th international conference on fibre reinforced concretes (FRC), textile reinforced concretes (TRC) and ultra-high performance concretes (UHPC) Preface The Fibre Concrete Conference series is held biennially to provide a platform to share knowledge on fibre reinforced concretes, textile concretes and ultra-high performance concretes regarding material properties and behaviour, technology procedures, topics of long-term behaviour, creep, durability; sustainable aspects of concrete including utilisation of waste materials in concrete production and recycling of concrete. The tradition of Fibre Concrete Conferences started in eighties of the last century. Nowadays the conference is organized by the Department of Concrete and Masonry Structures of the Czech Technical University in Prague, Faculty of Civil Engineering. The 9th International Conference Fibre Concrete 2017 had 109 participants from 27 countries all over the world. 55 papers were presented including keynote lectures of Professor Bažant, Professor Bartoš and Dr. Broukalová. The conference program covered wide range of topics from scientific research to practical applications. The presented contributions related to performance and behaviour of cement based composites, their long-term behaviour and durability, sustainable aspects, advanced analyses of structures from these composites and successful applications. This conference was organized also to honour Professor Zděnek P. Bažant on the occasion of his jubilee and to appreciate his merits and discoveries in the field of fibre reinforced composites, structural mechanics and engineering.

  10. Throughput capacity of the Asbestos Conversion Unit

    International Nuclear Information System (INIS)

    Hyman, M.H.

    1996-10-01

    An engineering assessment is presented for factors that could significantly limit the throughput capacity of the Asbestos Conversion Unit. The assessment focuses mainly on volumetric throughput capacity (and related mass rate and feed density), and energy input. Important conclusions that were reached during this assessment are that the throughput is limited by feed densification capability and that the design energy input rating appears to be adequate

  11. Occupation and mesothelioma in Sweden: updated incidence in men and women in the 27 years after the asbestos ban

    Directory of Open Access Journals (Sweden)

    Nils Plato

    2016-09-01

    Full Text Available OBJECTIVES We updated the Swedish component of the Nordic Occupational Cancer (NOCCA Study through 2009 in order to investigate the incidence of mesothelioma of the peritoneum and pleura in both genders, and explored occupational exposures that may be associated with mesothelioma. METHODS The Swedish component of the NOCCA Study includes 6.78 million individuals. Data from this cohort were linked to the population-based Swedish Cancer Registry and Swedish Total Population Registry for three periods between 1961 and 2009, and then further linked to the Swedish NOCCA job-exposure matrix, which includes 25 carcinogenic substances and the corresponding exposure levels for 280 occupations. Multivariate analysis was used to calculate standardized incidence ratios (SIRs for mesothelioma of the peritoneum and pleura by gender, occupational category, carcinogenic substance, and for multiple occupational exposures simultaneously. RESULTS A total of 3,716 incident mesotheliomas were recorded (21.1% in women. We found a significantly increased risk of mesothelioma in 24 occupations, as well as clear differences between the genders. Among men, increased risks of mesothelioma of the pleura were observed in male-dominated occupations, with the greatest elevation of risk among plumbers (SIR, 4.99; 95% confidence interval, 4.20 to 5.90. Among women, increased risks were observed in sewing workers, canning workers, packers, cleaners, and postal workers. In multivariate analysis controlling for multiple occupational exposures, significant associations were only observed between asbestos exposure and mesothelioma. CONCLUSIONS Asbestos exposure was associated with mesothelioma incidence in our study. The asbestos ban of 1982 has yet to show any clear effect on the occurrence of mesothelioma in this cohort. Among women, the occupations of canning workers and cleaners showed increased risks of mesothelioma of the pleura without evidence of asbestos exposure.

  12. Asbestos Surveillance Program Aachen (ASPA): initial results from baseline screening for lung cancer in asbestos-exposed high-risk individuals using low-dose multidetector-row CT

    International Nuclear Information System (INIS)

    Das, Marco; Muehlenbruch, Georg; Mahnken, Andreas H.; Guenther, Rolf W.; Wildberger, Joachim E.; Hering, K.G.; Sirbu, H.; Zschiesche, W.; Knoll, Lars; Felten, Michael K.; Kraus, Thomas

    2007-01-01

    The purpose of this study was to assess the prevalence of lung cancer in a high-risk asbestos-exposed cohort using low-dose MDCT. Of a population of 5,389 former power-plant workers, 316 were characterized as individuals at highest risk for lung cancer according to a lung-cancer risk model including age, asbestos exposure and smoking habits. Of these 316, 187 (mean age: 66.6 years) individuals were included in a prospective trial. Mean asbestos exposure time was 29.65 years and 89% were smokers. Screening was performed on a 16-slice MDCT (Siemens) with low-dose technique (10/20 mAs eff. ; 1 mm/0.5 mm increment). In addition to soft copy PACS reading analysis on a workstation with a dedicated lung analysis software (LungCARE; Siemens) was performed. One strongly suspicious mass and eight cases of histologically proven lung cancer were found plus 491 additional pulmonary nodules (average volume: 40.72 ml, average diameter 4.62 mm). Asbestos-related changes (pleural plaques, fibrosis) were visible in 80 individuals. Lung cancer screening in this high-risk cohort showed a prevalence of lung cancer of 4.28% (8/187) at baseline screening with an additional large number of indeterminate pulmonary nodules. Low-dose MDCT proved to be feasible in this highly selected population. (orig.)

  13. Evaluation of the size of the population occupationally exposed to asbestos dust and the incidence of asbestosis in Poland 1970-1980

    Energy Technology Data Exchange (ETDEWEB)

    Szeszenia-Dabrowska, N; Starzynski, Z

    1982-01-01

    The analysis was based on the data on occupational exposure to asbestos dust obtained from sanitary--epidemiological stations and cards of occupational diseases certification collected at the Institute of Occupational Medicine in Lodz. The approximate number of those occupationally exposed to asbestos dust in national economy as a whole was about 6400 persons (excluding the data on the Polish State Railways, Ministry of National Defence, Ministry of Internal Affairs) of this--3000 persons worked at concentrations exceeding TLV values for the dust containing asbestos. Approx. 2200 subjects worked at workplaces where no dust concentrations measurements were made. Mostly this work was performed periodically, casually, for varying daily or monthly number of hours. The highest exposure rates were those of the provinces of Lodz, Jelenia Gora and Gdansk (up to 1980), Warszawa and Katowice. In seventeen provinces there is not a single workplace with asbestos dust. During 1970-1980, 143 cases of asbestosis were found in Poland, of this--49% women. The length of employment in asbestos dust exposure of those with diagnosed asbestosis came, on average, to 20 years. Ninety-two per cent worked more than 10 years, 48% more than 20 years.

  14. Glass ceramic fibres

    International Nuclear Information System (INIS)

    Blaschek, O.; Paulitsch, P.

    1983-01-01

    As the correlation between mineralogical phase and chemical composition influences the type of application at different high temperatures, we studied the mineralogical phases of nine crystal glass fibres of the temperature ranges 1 150 degrees Celsius (Type 1), 1 400 degrees Celsius (Type 2) and 1 500 degrees Celsius (Type 3) at various high temperatures. The methods used in the study were microscopy, X-ray diffraction, transmission electron microscopy and differential thermal analysis. The investigations showed that mullite forms in glassy fibres of the system Al 2 O 3 . SiO 2 from 850 degrees Celsius to 990 degrees Celsius as 2/1 mullite; 3/2 mullite appeared above 990 degrees Celsius besides the crystallization of cristobalite. Fibres with 95 per cent Al 2 O 3 include the phases delta-Al 2 O 3 and alpha- Al 2 O 3 and mullite. Delta- Al 2 O 3 is stable up to 1 100 degrees Celsius. Alpha-Al 2 O 3 and mullite are only stable phases at 1 400 degrees Celsius. These different crystal phases influence the quality of the technical fibre according to the stability field of glass and crystals. This study has determined that it is possible to identify different fibres from different productions by their mineralogical compositions and to relate them to the high temperature application

  15. [A Forensic Autopsy Case Applied for Asbestos-Related Disease].

    Science.gov (United States)

    Makihara, Kosuke; Hamada, Tetsuo; Kasai, Kentaro; Tanaka, Toshiko; Sato, Hiroaki

    2016-03-01

    We had a forensic autopsy case that required additive pathological examination for the asbestos-related lung disease compensatory application afterwards. A man in his sixties with a history of occupational asbestos inhalation who had neither visited a hospital nor received a physical examination received forensic autopsy because of his death from unknown cause. An inmate said, "He developed cough and dyspnea, and died in the progression of the symptoms." The autopsy revealed widespread pleural plaques on both sides of the parietal pleura and multiple tumors in both sides of the lungs. The cause of death was diagnosed as lung cancer. Additional pathological examination was asked by his family to certify that he had suffered from asbestos-related lung disease in order to apply to the Asbestos-related Damage Relief Law. The Japanese criteria of the compensation law of asbestos-related lung cancer is the detection of more than 5,000 asbestos bodies per gram of dry lung tissue, while his number of asbestos bodies was 4,860. Asbestos bodies were reported to be accumulated in the distal lung parenchyma with no pathological changes. The present lung samples were collected from proximal section around the tumor, which might have made the number of asbestos bodies less than the criteria. Both the number of patients suffering from asbestos-related lung disease and the number of forensic autopsy cases have increased in Japan. Collecting lung samples from the appropriate lung section is essential and should be noted when the lung cancer is suspected at forensic autopsy in order to apply for asbestos-related lung disease compensation.

  16. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  17. Polarisation effects in fibre lasers

    OpenAIRE

    Lin, J.T.; Morkel, P.R.; Reekie, L.; Payne, D.N.

    1987-01-01

    Two orthogonal polarisation eigenmodes have been observed in a single-mode fibre laser. Experimental investigation shows good agreement with theoretical analysis. Both Nd3+ and Er3+-doped single-polarisation single-mode fibre lasers have been demonstrated

  18. Modelling of photonic crystal fibres

    DEFF Research Database (Denmark)

    Knudsen, Erik

    2003-01-01

    , as well as a honeycomb bandgap fibre and the first analysis of semi-periodic layered air-hole fibres. Using the modelling framework established as a basis, we provide an analysis of microbend loss, by regarding displacement of a fibre core as a stationary stochastic process, inducing mismatch between......In the presenta ph.d. work a theoretical study of aspects of modelling photonic crystal fibres was carried out. Photonic crystal fibres form a class of optical waveguides where guidance is no longer provided by a difference in refractive index between core and cladding. Instead, guidance...... is provided by an arrangement of air-holes running along the length of the fibre. Depending on the geometry of the fibre, the guiding mechanism may be either arising from the formation of a photonic bandgap in the cladding structure (photonic bandgap fibre), or by an effect resembling total internal...

  19. Statins do not alter the incidence of mesothelioma in asbestos exposed mice or humans.

    Directory of Open Access Journals (Sweden)

    Cleo Robinson

    Full Text Available Mesothelioma is principally caused by asbestos and may be preventable because there is a long latent period between exposure and disease development. The most at-risk are a relatively well-defined population who were exposed as a consequence of their occupations. Although preventative agents investigated so far have not been promising, discovery of such an agent would have a significant benefit world-wide on healthcare costs and personal suffering. Statins are widely used for management of hypercholesterolemia and cardiovascular risk; they can induce apoptosis in mesothelioma cells and epidemiological data has linked their use to a lower incidence of cancer. We hypothesised that statins would inhibit the development of asbestos-induced mesothelioma in mice and humans. An autochthonous murine model of asbestos-induced mesothelioma was used to test this by providing atorvastatin daily in the feed at 100 mg/kg, 200 mg/kg and 400 mg/kg. Continuous administration of atorvastatin did not alter the rate of disease development nor increase the length of time that mice survived. Latency to first symptoms of disease and disease progression were also unaffected. In a parallel study, the relationship between the use of statins and development of mesothelioma was investigated in asbestos-exposed humans. In a cohort of 1,738 asbestos exposed people living or working at a crocidolite mine site in Wittenoom, Western Australia, individuals who reported use of statins did not have a lower incidence of mesothelioma (HR = 1.01; 95% CI = 0.44-2.29, p = 0.99. Some individuals reported use of both statins and non-steroidal anti-inflammatory drugs or COX-2 inhibitors, and these people also did not have an altered risk of mesothelioma development (HR = 1.01; 95% CI = 0.61-1.67, p = 0.97. We conclude that statins do not moderate the rate of development of mesothelioma in either a mouse model or a human cohort exposed to asbestos.

  20. Concrete workability and fibre content

    OpenAIRE

    Vikan, Hedda

    2007-01-01

    Research report Parameters influencing the workability of fibre concrete and maximum fibre content are given in this state of the art report along with the range of fibre types available on today’s market. The study reveales that new placing techniques and production methods are crucial in order to increase fibre content and concrete strength. Achieving the same mechanical properties as traditionally reinforced concrete will probably also demand changes of the matrix. Finally, reco...

  1. Double standards: the multinational asbestos industry and asbestos-related disease in South Africa.

    Science.gov (United States)

    McCulloch, Jock; Tweedale, Geoffrey

    2004-01-01

    This study documents and contrasts the development of knowledge about asbestos-related disease (ARD) in South Africa and the United Kingdom. It also contributes to the globalization debate by exploring corporate decision-making in a multinational industry. Between the 1930s and 1960s, the leading U.K. asbestos companies developed a sophisticated knowledge of ARD, though in South Africa, where the leading companies such as Turner & Newall and Cape Asbestos owned mines, there was little attempt to apply this knowledge. Asbestos mines (and their environments) in South Africa were uniquely dusty and ARD was rife. Social and political factors in South Africa, especially apartheid, allowed these companies to apply double standards, even after 1960 when the much more serious hazard of mesothelioma was identified. This shows the need for greater regulation of multinationals. Because of the lack of such regulation in the early 1960s, an opportunity was lost to prevent the current high morbidity and mortality of ARD both in South Africa and worldwide.

  2. Asbestos pollution in an inactive mine: determination of asbestos fibers in the deposit tailings and water.

    Science.gov (United States)

    Koumantakis, Emmanouil; Kalliopi, Anastasiadou; Dimitrios, Kalderis; Gidarakos, Evangelos

    2009-08-15

    An inactive asbestos mine in Northern Greece, known as MABE, had been operational for 18 years, showing an annual chrysotile production of approximately 100,000 tons. It is estimated that a total of 68 million tons of the mineral serpentine were excavated from the mine, of which 881,000 tons of chrysotile asbestos were produced. The mine deposits are located very near to the river Aliakmonas. The water of the river is extensively used as drinking water, as well as for irrigation. This study estimated the amount of asbestos currently present in the deposits, to at least 1.33 million tons. This is a 10-fold increase since the start of mine operation in 1982. Water samples obtained throughout the river had high chrysotile concentrations, in most cases far exceeding EPA's standard value (7 x 10(6)f/l). Therefore, the mine and the deposits urgently require remediation works, such as removal of large contaminated objects from the mine buildings and re-vegetation of the deposit areas, in order to reduce the asbestos levels in the river water.

  3. Single-mode optical fibres

    CERN Document Server

    Cancellieri, G

    1991-01-01

    This book describes signal propagation in single-mode optical fibres for telecommunication applications. Such description is based on the analysis of field propagation, considering waveguide properties and also some of the particular characteristics of the material fibre. The book covers such recent advances as, coherent transmissions; optical amplification; MIR fibres; polarization maintaining; polarization diversity and photon counting.

  4. [Asbestos at the time of the First World War].

    Science.gov (United States)

    Bianchi, C; Bianchi, T

    2015-11-22

    Between the end of the 19th century and the beginning of the 20th numerous asbestos industries began operations in various parts of the world. At the time of the First World War there is ample evidence of the use of this mineral in shipbuilding, the aircraft industry and in the construction industry. In the years 1912-17 the writer Franz Kafka was co-proprietor of a small asbestos factory in Prague. Some of the writer's novels and journal pages were inspired by this experience. In this way asbestos entered into the history of 20th century European literature. In 1917 asbestos extraction was started at the quarry in Balangero, near Turin, Italy. Risks related to the use of asbestos were known at the beginning of the 20th century and legislation aimed at preventing the harmful effects of the mineral were approved in Italy.

  5. Guidelines for Assessment and Abatement of Asbestos-Containing Materials in Buildings.

    Science.gov (United States)

    Pielert, James H.; Mathey, Robert G.

    This report presents guidelines, based on available information, for the assessment and abatement of asbestos-containing materials in buildings. Section 1 provides background information on the history and use of asbestos-containing products in buildings, the characteristics of asbestos fibers, products and materials containing asbestos, and…

  6. Chrysotile asbestos quantification in serpentinite quarries: a case study in Valmalenco, central Alps, northern Italy

    Science.gov (United States)

    Cavallo, Alessandro

    2013-04-01

    Outcrops of serpentinites are usually strongly fractured and cataclastic, and the rock can only be used as ballast. However, in rare cases, like in Valmalenco (Central Alps, Northern Italy), fractures are regular and well spaced, and the rock mass has good geotechnical quality, ideal conditions for the extraction of dimension stone blocks. The Valmalenco Serpentinite is marketed worldwide as dimension and decorative stone, with remarkable mechanical properties and pleasing colours and textures. However, the same area was once subject to chrysotile asbestos mining, in the form of discrete veins along the main discontinuities of the rock mass. For this reason, airborne asbestos contamination can occur during the extraction and processing cycle of the rocks, therefore it is essential to locate and quantify asbestos in the rock mass, to reduce as much as possible the exposure risk. The first step was a detailed geostructural survey of each quarry, in order to characterize the main discontinuities (orientation, spacing, linear persistence, opening, filling), with special attention to the identification of fibrous minerals. The surveys was followed by extensive sampling of massive rocks, mineralized veins and fillings of fractures, and the cutting sludge derived from diamond wire cutting. Preliminary qualitative XRPD was performed on all samples, while quantitative analysis was carried out on the most representative samples of the main rock mass discontinuities. On the other hand, XRPD is not effective in the identification of asbestos percentages of less than 2% by weight, and the accurate distinction among the various serpentine polymorphs (antigorite, lizardite, chrysotile) is very difficult (if not impossible) when they are simultaneously present, due to their very similar basic structure and the strong structural disorder. The same samples were then analyzed by SEM-EDS (fiber counting after filtration on a polycarbonate filter), for a better distinction between

  7. Asbestos-related chest X-ray changes among Greek merchant marine seamen

    International Nuclear Information System (INIS)

    Velonakis, E.G.; Tsorva, A.; Tzonou, A.; Trichopoulos, D.

    1989-01-01

    One hundred forty-one retired Greek mariners were examined radiologically for asbestos-related lung disease. Thirty-eight (27%) had small opacities classified as ILO category 1/0 or more; 37 (26%) had radiologic evidence of pleural lesions; 17 (12%) had both parenchymal and pleural lesions; and a total of 58 (41%) had one or more radiologic findings of asbestos-related lung disease. In discriminant analysis, duration of maritime employment was predictive of pleural lesions, but the association was not statistically significant (one-tail, p = .16). The prevalence of pleural lesions was also higher among sailors than among officers, and this association was statistically significant (one-tail, p = .05). In this group, none of the occupational variables studied (age, duration of maritime employment, and rank) was related to lung fibrosis. After controlling by multiple regression for mutual confounding effects, suggestive negative associations for the presence of pleural lesions were found with FVC (one-tail, p = .13) as well as with FEF25% (one-tail, p = .09) and FEF50% (one-tail, p = .07). By contrast, no association was found between pulmonary fibrosis and any of the respiratory volumes. The results of this study suggest that mariners may present evidence of asbestos-related disease after many years from onset of exposure on ships

  8. The use of diagnostic conventional radiology in discovering asbestos induced diseases in Sudan

    International Nuclear Information System (INIS)

    Mohamed, Rehab Elrayah Ibrahim

    2001-12-01

    To assess whether there was an association between asbestos exposure and abnormalities on chest x-ray or viltogram spiro meter, chest radiographs and pulmonary function tests of 30 asbestos-exposed workers were reviewed for pleural and parenchymal abnormalities. Postero-anterior (PA) chest x-ray has been taken using film size about 12x15 inch, with a 3-phase x-ray unit. Pulmonary function test was done using special chart and viltograph spiro meter machine. It has been found that about 23 workers were laborers and the rest were other clerks. About 53% of the workers were educated, and about 37% were smokers. The mean age of the workers was 39 years, and the standard deviation was 14 years, with an error of ± 1.5. It has been found that the mean duration of working was 9 years, and the standard deviation was 7 years, with an error of ± 1.2%. The mean value of viltogram spiro meter was 37%, and the standard deviation was 8%, with an error of ± 1.5%. It has been found that 17 of the workers had changes on chest radiography. In conclusion, chest radiography proved to be a simple, reliable for diagnosing asbestos-related diseases, and it is more accurate than viltogram spiro meter examination. (Author)

  9. Validation of the diagnosis of mesothelioma and BAP1 protein expression in a cohort of asbestos textile workers from Northern Italy.

    Science.gov (United States)

    Boffetta, P; Righi, L; Ciocan, C; Pelucchi, C; La Vecchia, C; Romano, C; Papotti, M; Pira, E

    2018-02-01

    Diagnosis of mesothelioma based on death certificate is subject to misclassification, which may bias the results of epidemiology studies. A high proportion of mesothelioma harbor mutations in the BRCA1-associated protein 1 (BAP1) gene. We searched medical and pathology records and specimens for 127 workers from a textile-asbestos factory in Italy who died during 1963-2013 with a diagnosis of pleural or peritoneal neoplasm or mesothelioma on death certificate, to confirm the diagnosis with immunohistochemistry markers. We calculated the odds ratio of confirmation by selected characteristics and asbestos exposure variables. When sufficient pathology material was available, we analyzed BAP1 protein expression. The diagnosis of mesothelioma was histologically confirmed for 35 cases (27.6%); 5 cases were classified as non-mesothelioma (3.9%), for 33 cases a mention of mesothelioma was found on record but no sufficient material was available for revision (26.0%); no records were available for 54 cases (death-certificate-only 42.5%). Diagnostic confirmation was not associated with sex, location of the neoplasm, age, or duration of employment; however, there was a significant association with time since first employment (P for linear trend 0.04). An association between duration of employment and time since first employment was observed for confirmed cases but not for death-certificate-only cases. BAP1 protein was lost in 18/35 cases (51.4%), without an association with sex, location, age, indices of asbestos exposure, or survival. We were able to confirm by immunohistochemistry a small proportion of mesothelioma diagnoses on certificates of deceased asbestos workers, and confirmation correlated with latency of asbestos exposure but not other characteristics. BAP1 protein loss is a frequent event in mesothelioma of asbestos-exposed workers, but does not correlate with exposure. © The Author 2017. Published by Oxford University Press on behalf of the European Society for

  10. Treatment of airborne asbestos and asbestos-like microfiber particles using atmospheric microwave air plasma

    Energy Technology Data Exchange (ETDEWEB)

    Averroes, A., E-mail: aulia.a.aa@m.titech.ac.jp [Department of Chemical Engineering, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan); Sekiguchi, H. [Department of Chemical Engineering, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan); Sakamoto, K. [Street Design Corporation, 6-9-30 Shimo odanaka, Kawasaki-shi, Kanagawa 211-0041 (Japan)

    2011-11-15

    Highlights: {yields} We use atmospheric microwave air plasma to treat ceramic fiber and stainless fiber as asbestos alike micro fiber particle. {yields} Spheroidization of certain type of ceramic fiber and stainless fiber particle. {yields} The evaluation of the treated particles by the fiber vanishing rate. {yields} Good fiber vanishing rate is observed for fiber particle with diameter below 10 {mu}m. {yields} The treatment of pure asbestos and a suggestion of the use of this method for the treatment airborne asbestos. - Abstract: Atmospheric microwave air plasma was used to treat asbestos-like microfiber particles that had two types of ceramic fiber and one type of stainless fiber. The treated particles were characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). The experiment results showed that one type of ceramic fiber (Alumina:Silica = 1:1) and the stainless fiber were spheroidized, but the other type of ceramic fiber (Alumina:Silica = 7:3) was not. The conversion of the fibers was investigated by calculating the equivalent diameter, the aspect ratio, and the fiber content ratio. The fiber content ratio in various conditions showed values near zero. The relationship between the normalized fiber vanishing rate and the energy needed to melt the particles completely per unit surface area of projected particles, which is defined as {eta}, was examined and seen to indicate that the normalized fiber vanishing rate decreased rapidly with the increase in {eta}. Finally, some preliminary experiments for pure asbestos were conducted, and the analysis via XRD and phase-contrast microscopy (PCM) showed the availability of the plasma treatment.

  11. Treatment of airborne asbestos and asbestos-like microfiber particles using atmospheric microwave air plasma

    International Nuclear Information System (INIS)

    Averroes, A.; Sekiguchi, H.; Sakamoto, K.

    2011-01-01

    Highlights: → We use atmospheric microwave air plasma to treat ceramic fiber and stainless fiber as asbestos alike micro fiber particle. → Spheroidization of certain type of ceramic fiber and stainless fiber particle. → The evaluation of the treated particles by the fiber vanishing rate. → Good fiber vanishing rate is observed for fiber particle with diameter below 10 μm. → The treatment of pure asbestos and a suggestion of the use of this method for the treatment airborne asbestos. - Abstract: Atmospheric microwave air plasma was used to treat asbestos-like microfiber particles that had two types of ceramic fiber and one type of stainless fiber. The treated particles were characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). The experiment results showed that one type of ceramic fiber (Alumina:Silica = 1:1) and the stainless fiber were spheroidized, but the other type of ceramic fiber (Alumina:Silica = 7:3) was not. The conversion of the fibers was investigated by calculating the equivalent diameter, the aspect ratio, and the fiber content ratio. The fiber content ratio in various conditions showed values near zero. The relationship between the normalized fiber vanishing rate and the energy needed to melt the particles completely per unit surface area of projected particles, which is defined as η, was examined and seen to indicate that the normalized fiber vanishing rate decreased rapidly with the increase in η. Finally, some preliminary experiments for pure asbestos were conducted, and the analysis via XRD and phase-contrast microscopy (PCM) showed the availability of the plasma treatment.

  12. HOLLOW FIBRE MEMBRANE

    NARCIS (Netherlands)

    Wessling, Matthias; Stamatialis, Dimitrios; Kopec, K.K.; Dutczak, S.M.

    2011-01-01

    The present invention relates to a process for manufacturing a hollow fibre membrane having a supporting layer and a separating layer, said process comprising: (a)extruding a spinning composition comprising a first polymer and a solvent for the first polymer through an inner annular orifice of a

  13. HOLLOW FIBRE MEMBRANE

    NARCIS (Netherlands)

    Wessling, Matthias; Stamatialis, Dimitrios; Kopec, K.K.; Dutczak, S.M.

    2013-01-01

    The present invention relates to a process for manufacturing a hollow fibre membrane having a supporting layer and a separating layer, said process comprising: (a) extruding a spinning composition comprising a first polymer and a solvent for the first polymer through an inner annular orifice of a

  14. Glycoprotein YKL-40 Levels in Plasma Are Associated with Fibrotic Changes on HRCT in Asbestos-Exposed Subjects

    Directory of Open Access Journals (Sweden)

    Tuija Väänänen

    2017-01-01

    Full Text Available YKL-40 is a chitinase-like glycoprotein produced by alternatively activated macrophages that are associated with wound healing and fibrosis. Asbestosis is a chronic asbestos-induced lung disease, in which injury of epithelial cells and activation of alveolar macrophages lead to enhanced collagen production and fibrosis. We studied if YKL-40 is related to inflammation, fibrosis, and/or lung function in subjects exposed to asbestosis. Venous blood samples were collected from 85 men with moderate or heavy occupational asbestos exposure and from 28 healthy, age-matched controls. Levels of plasma YKL-40, CRP, IL-6, adipsin, and MMP-9 were measured with enzyme-linked immunosorbent assay (ELISA. Plasma YKL-40 levels were significantly higher in subjects with asbestosis (n=19 than in those with no fibrotic findings in HRCT following asbestos exposure (n=66 or in unexposed healthy controls. In asbestos-exposed subjects, plasma YKL-40 correlated negatively with lung function capacity parameters FVC (Pearson’s r −0.259, p=0.018 and FEV1 (Pearson’s r −0.240, p=0.028 and positively with CRP (Spearman’s rho 0.371, p<0.001, IL-6 (Spearman’s rho 0.314, p=0.003, adipsin (Spearman’s rho 0.459, p<0.001, and MMP-9 (Spearman’s rho 0.243, p=0.025. The present finding suggests YKL-40 as a biomarker associated with fibrosis and inflammation in asbestos-exposed subjects.

  15. BOA: Pipe asbestos insulation removal robot system

    International Nuclear Information System (INIS)

    Schempf, H.; Bares, J.; Schnorr, W.

    1995-01-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  16. Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Takashi, E-mail: tyama@nies.go.jp [Center for Material Cycles and Waste Management Research, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Kida, Akiko [Faculty of Agriculture, Ehime University, 3-5-7 Tarumi, Matsuyama, Ehime 790-8566 (Japan); Noma, Yukio [Department of Environmental Science, Fukuoka Womens University, 1-1-1 Kasumigaoka, Higashiku, Fukuoka 813-8529 (Japan); Terazono, Atsushi [Center for Material Cycles and Waste Management Research, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Sakai, Shin-ichi [Environmental Preservation Research Center, Kyoto University, Yoshidahonmachi, Sakyoku, Kyoto 606-8501 (Japan)

    2014-02-15

    Highlights: • A high sensitive and selective testing method for asbestos in treated materials of asbestos containing wastes was developed. • Asbestos can be determined at a limits are a few million fibers per gram and a few μg g{sup −1}. • High temperature melting treatment samples were determined by this method. Asbestos fiber concentration were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10{sup 6} g{sup −1}. - Abstract: Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10{sup −6} f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.

  17. Efficacy of respiratory endoscopy on subjects requiring further detailed examinations after initial asbestos-related disease screening

    International Nuclear Information System (INIS)

    Fukuoka, Kazuya; Uesaka, Ayuko; Kuribayashi, Kozo

    2007-01-01

    We evaluated the efficacy of respiratory endoscopy on subjects requiring further detailed examinations as a result of initial asbestos-related disease screening. The subjects consisted of 132 participants who underwent asbestos-related disease screening in our hospital between July 2005 and March 2006. According to their history of screening, the participants were classified into the initial screening group and the second screening group. The former consisted of 76 participants without prior screening, while the latter consisted of 56 participants who were referred to our hospital for the detailed examinations as a result of initial screening undergone elsewhere. The participants were examined concerning their history of asbestos exposure, and then underwent chest X-ray followed by chest computed tomography (CT). Respiratory endoscopic examinations were mainly performed in participants with suspected chest malignancies. There were no significant differences in the distribution of age or gender between the two screening groups. In both screening groups, more than 70% of the participants had a history of occupational exposure to asbestos. Radiological abnormalities were observed in 110 (83%) of all participants. Asbestos-related diseases were detected in a total of 90 (68%) cases. The breakdown of the 90 cases by disease was as follows: 60 cases had pleural plaque, 13 pulmonary fibrosis, 5 lung cancer (LC), 4 benign asbestos pleurisy, 4 round atelectasis, 2 diffuse pleural thickening, and 2 malignant pleural mesothelioma (MPM). The disease detection rate of LC and MPM was 3.8% and 1.5%, respectively. Respiratory endoscopic examinations were performed in a total of 15 cases. The breakdown of the 15 cases by examination was as follows: bronchoscopy was performed in 6 cases, thoracoscopy including video-assisted thoracoscopic surgery (VATS) in 8, and mediastinoscopy in 4. Two cases with early LC were diagnosed by videothoracoscopic lung biopsy. A diagnosis of MPM was

  18. Regulatory risk assessment approaches for synthetic mineral fibres.

    Science.gov (United States)

    Harrison, Paul; Holmes, Philip; Bevan, Ruth; Kamps, Klaus; Levy, Leonard; Greim, Helmut

    2015-10-01

    Exposure to synthetic mineral fibres (SMF) may occur in a number of workplace scenarios. To protect worker health, a number of different organisations worldwide have assessed the health risk of these materials and established workplace exposure limits. This paper outlines the basic principles of risk assessment and the scientific methods used to derive valid (justifiable) occupational exposure limits (OELs) and goes on to show how, for SMF, and particularly for refractory ceramic fibre (otherwise known as aluminosilicate wool, RCF/ASW), the methods used and the associated outcomes differ widely. It is argued that the resulting differences in established OELs prevent consistent and appropriate risk management of SMF worldwide, and that development of a transparent and harmonised approach to fibre risk assessment and limit-setting is required. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  19. Histological findings and lung dust analysis as the basis for occupational disease compensation in asbestos-related lung cancer in Germany.

    Science.gov (United States)

    Feder, Inke Sabine; Theile, Anja; Tannapfel, Andrea

    2018-01-15

    This study has researched the significance of histologically raised findings and lung dust analyses in the context of claiming the recognition of and thus compensation for an asbestos-associated occupational disease. For this approach, all findings from the German Mesothelioma Register in 2015 that included lung dust analyses were evaluated and were compared with information on asbestos fiber exposure at work based on fiber years, and with the results of radiological findings. For 68 insured persons, recognition of an asbestos-induced lung disease according to Section 4104 of the German Ordinance on Occupational Diseases (Berufskrankheitenverordnung - BKV) could be recommended solely on the basis of the histological examinations of lung tissues and complementary lung dust analyses. Neither did the calculation of the cumulative asbestos dust exposure at work yield 25 fiber years, nor could bridge findings (e.g., plaques) be identified. In addition, the autopsies of 12 patients revealed plaques that had not been diagnosed during radiological examinations. These results show that - irrespective of the prescribed working techniques and radiological diagnosis - pathological/anatomical and histological diagnostics are often the only way for the insureds to demonstrate the causal connection between asbestos and their disease. Even after long intervals of up to 40 years post last exposure, the asbestos fibers would still be easily detectable in the lung tissues evaluated. Whenever suitable tissue is available, it should be examined for mild asbestosis with the aid of a lung dust analysis. Otherwise there is a risk that an occupational disease is wrongfully rejected. In the context of health insurance, the lung dust analysis and the resulting proof of the presence of asbestosis often constitute one option of providing evidence of an occupational disease. Int J Occup Med Environ Health 2018;31(3):293-305. This work is available in Open Access model and licensed under a CC BY

  20. Origin and the mechanical properties of asbestos

    Energy Technology Data Exchange (ETDEWEB)

    O' Hanley, D.S.

    1986-01-01

    Dual networks and chemographic analysis are used to investigate the stability of lizardite and chrysotile in the simplest multisystem that describes serpentinization. Phase diagrams for Mg serpentinites described by MgO-SiO/sub 2/-H/sub 2/O are constructed for systems of five, six and seven phases using dual networks. The seven-phase system brucite, forsterite, lizardite, chrysotile, antigorite, enstatite, and talc describes the serpentinization of Mg peridotites. The chrysotile asbestos deposits of southeastern Quebec occur in serpentinized peridotites of Ordovician ophiolites. The asbestos is localized in veins within blocks of partly serpentinized peridotite bounded by zones containing schistose serpentinite and granitic masses. A simple, rapid microscopic test was designed to obtain semi-quantitative measurements of the bending strength of acicular or fibrous crystals. The instrument was tested on samples of asbestiform tremolite from Baltimore, Maryland, and non-asbestiform tremolite from the Warren Head mine in New Hampshire. The samples ranged in size from 0.3 to 0.8 mm in length and 0.9 to 15 ..mu..m in diameter. The asbestiform tremolite was stronger than the non-asbestiform tremolite at every diameter, with an order of magnitude higher strength at small diameters. This indicates that asbestiform tremolite behaves as a whisker, whereas non-asbestiform tremolite does not.

  1. Preparation of radiolabeled bioactive asbestos fibers

    Energy Technology Data Exchange (ETDEWEB)

    Tewson, T J; Francsechini, M P; Scheule, R K; Holian, A [Texas Univ., Houston, TX (USA). Health Science Center

    1991-01-01

    We have developed an efficient procedure to radiolabel asbestos fibers while retaining the bioactivity of the fibers. The fibers are labeled with {sup 68}Ge. The {sup 68}Ge decays into {sup 68}Ga, which then can be detected by its characteristic positron emission. Both chrysotile and crocidolite asbestos, a serpentine and an amphibole, respectively, were radiolabeled successfully. Mild reaction conditions and short reaction times were found under which {similar to}90% of the added {sup 68}Ge and {sup 68}Ga bound to the fibers. The radiolabel was retained even after washing the fibers extensively with physiologic buffers. The effects of the labeling on the bioactivity of the fibers were evaluated in an in vitro assay using guinea pig alveolar macrophages as a target cell. Labeled chrysotile fibers were found to retain >95% of their ability to stimulate these cells. The labeling procedure described in this study should be useful in preparing labeled fibers to investigate both in vitro and in vivo phenomena. (author).

  2. Factors influencing the reading of small irregular opacities in a radiological survey of asbestos miners in South Africa

    International Nuclear Information System (INIS)

    Sluis-Cremer, G.K.; Hessel, P.A.; Hinizdo, E.

    1989-01-01

    A cross-sectional radiological survey of 2 245 men who were employed in South African asbestos mines was conducted in 1976. Since 1976, the lungs of 172 of these men who died have been examined to establish the presence of asbestosis or other pneumoconiosis. The x-ray readings (ILO/UC 1971) were compared with the pathological findings. A high prevalence of false positive readings, particularly for two of the three readers, was found. False negative readings were also very prevalent. Detailed information about asbestos and other mining exposure, smoking habit, age, height, and weight were examined to determine what influence they may have had in inducing false positive findings. Other dust exposure and smoking appeared to be possible factors, whereas age and obesity were probably not. It is suggested that the term small irregular opacities requires more precise definition

  3. [Effectiveness of support for asbestos health consultation in health centers].

    Science.gov (United States)

    Nagamatsu, Yasuko

    2011-09-01

    In this research, we aimed to evaluate the support for asbestos health consultation in health centers. In this exploratory descriptive study, a self-administered original questionnaire was developed and used. Among all 517 health centers, valid responses were returned from 323 (62.5%) consenting centers. Consultations in the previous year ranged from 0-108 cases, with a facility median of 3.0 cases. Among staff members, 86.4% did not receive training and 35.4% had never used the manual. Workplaces that use asbestos within their jurisdiction were recognized by 39.2% of staff members, and 16.7% of these members always supported consultants psychologically. The staff members were not confident about asbestos health consultation: 71.2% for general questions, 76.2% for questions about asbestos-related diseases, and 76.4% for questions about risk of asbestos-related diseases; 51.4% were not confident about the Asbestos-Related Health Damage Relief System. Health center staff members who were significantly more confident were those who had more staff to work with; dealt with many consultations in the previous year; recognized the workplaces using asbestos within their jurisdiction; often used the manual and often psychologically supported consultants. According to the covariance structure analysis model, the 'use of support systems' consisting of 'the use of manual', 'training attendance' and 'recognition of workplaces that use asbestos' positively affected the frequency of psychological support (peffective in building the confidence of health center staff in relation to asbestos health consultation, although the use of these support systems was low.

  4. Comparison of soil sampling and analytical methods for asbestos at the Sumas Mountain Asbestos Site—Working towards a toolbox for better assessment

    Science.gov (United States)

    Established soil sampling methods for asbestos are inadequate to support risk assessment and risk-based decision making at Superfund sites due to difficulties in detecting asbestos at low concentrations and difficulty in extrapolating soil concentrations to air concentrations. En...

  5. Carcinogenic risk assessment and management of ionising radiation, asbestos and nickel: a comparative approach

    International Nuclear Information System (INIS)

    Schneider, T.; Lepicard, S.; Oudiz, A.; Heriard Dubreuil, G.; Gadbois, S.

    2000-01-01

    The objective of this study is to identify the similarities as well as the differences of risk assessment and management of ionizing radiation, asbestos and nickel in France. The comparison has been performed at three levels of analysis: concepts, regulation and practices. Ionizing radiation (IR) is compared with asbestos as far as occupational exposure is concerned and to nickel and nickel compounds as far as general population exposure is concerned. The three main stages of risk assessment were considered: hazard identification, exposure-risk relationship, exposure assessment. Alternative risk management policies were reviewed. The main results are the following: At the conceptual level, the risk assessment and management frameworks present many similarities: exposure-risk relationships exist, and low dose extrapolation is considered as legitimate. Comparison of protection strategies can be carried out with reference to the 'optimization' principle developed for IR. At the regulatory level, the status of the IR dose limits differs from the status of the exposure limit values set for asbestos and nickel. For IR, compliance with the dose limit cannot be seen as the final objective of protection: the burden is put on the requirement to maintain the doses as low as reasonably achievable, social and economical factors being taken into account (ALARA). In most of the situations, actual exposure to IR in industry appear to be significantly lower than the dose limit. In the case of asbestos and nickel, the exposure limit values are very low and compliance with the limits is indeed a quite ambitious objective. At the practical level, some noticeable differences exist as far as the decision aiding procedures are concerned. A process which may be considered as an ALARA approach is applied, in the case of nickel: seeking for the 'best available technologies', defining and implementing with stakeholdes regional plans for air quality. In the case of asbestos, the predictive

  6. Genotoxicity of carbon nanofibers: Are they potentially more or less dangerous than carbon nanotubes or asbestos?

    International Nuclear Information System (INIS)

    Kisin, E.R.; Murray, A.R.; Sargent, L.; Lowry, D.; Chirila, M.; Siegrist, K.J.; Schwegler-Berry, D.; Leonard, S.; Castranova, V.; Fadeel, B.; Kagan, V.E.; Shvedova, A.A.

    2011-01-01

    The production of carbon nanofibers and nanotubes (CNF/CNT) and their composite products is increasing globally. CNF are generating great interest in industrial sectors such as energy production and electronics, where alternative materials may have limited performance or are produced at a much higher cost. However, despite the increasing industrial use of carbon nanofibers, information on their potential adverse health effects is limited. In the current study, we examine the cytotoxic and genotoxic potential of carbon-based nanofibers (Pyrograf (registered) -III) and compare this material with the effects of asbestos fibers (crocidolite) or single-walled carbon nanotubes (SWCNT). The genotoxic effects in the lung fibroblast (V79) cell line were examined using two complementary assays: the comet assay and micronucleus (MN) test. In addition, we utilized fluorescence in situ hybridization to detect the chromatin pan-centromeric signals within the MN indicating their origin by aneugenic (chromosomal malsegregation) or clastogenic (chromosome breakage) mechanisms. Cytotoxicity tests revealed a concentration- and time-dependent loss of V79 cell viability after exposure to all tested materials in the following sequence: asbestos > CNF > SWCNT. Additionally, cellular uptake and generation of oxygen radicals was seen in the murine RAW264.7 macrophages following exposure to CNF or asbestos but not after administration of SWCNT. DNA damage and MN induction were found after exposure to all tested materials with the strongest effect seen for CNF. Finally, we demonstrated that CNF induced predominately centromere-positive MN in primary human small airway epithelial cells (SAEC) indicating aneugenic events. Further investigations are warranted to elucidate the possible mechanisms involved in CNF-induced genotoxicity.

  7. Determining Satisfaction with Access and Financial Aspects of Care for Persons Exposed to Libby Amphibole Asbestos: Rural and National Environmental Policy Implications

    International Nuclear Information System (INIS)

    Winters, Ch.A.; Kuntz, S.W.; Hill, W.; Weinert, C.; Rowse, K.

    2011-01-01

    Libby, Montana is a Superfund site and epicenter of one of the worst environmental disasters in the USA history in terms of asbestos-related mortality and morbidity. Perceptions of access and financial aspects of care were explored among a national cohort of persons post asbestos exposure and prior to a 2009 Public Health Emergency Declaration. Our findings indicated the Libby cohort was significantly less satisfied with access and financial aspects of care as measured by two PSQ-III scales when compared to an adult, chronically ill patient sample. Participants with higher levels of respiratory morbidity and depression had significantly lower satisfaction scores

  8. Optical Fibre Bundle

    CERN Multimedia

    These are sample fibre optic cables which are used for networking. Optical fibers are widely used in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data rates) than wire cables. Fibers are used instead of metal wires because signals travel along them with less loss and are also immune to electromagnetic interference. This is useful for somewhere like CERN where magnets with their highly powerful magnetic fields could pose a problem.

  9. The extent and influence of Asbestos Safety Awareness training among managers who had previously commissioned an asbestos survey in their workplace buildings

    OpenAIRE

    HICKEY, Jane; SAUNDERS, Jean; DAVERN, Peter

    2015-01-01

    A telephone survey was conducted among a sample of managers (n=30) in Ireland who had previously commissioned an asbestos survey in their workplace buildings. The aims of the telephone survey were to examine the extent to which managers had completed Asbestos Safety Awareness (ASA) training, and to assess how such training might influence (i) their instinctive thoughts on asbestos, and (ii) their approach to aspects of asbestos management within their buildings. Managers’ motivations for comm...

  10. Investigative studies for the use of an inactive asbestos mine as a disposal site for asbestos wastes.

    Science.gov (United States)

    Gidarakos, Evangelos; Anastasiadou, Kalliopi; Koumantakis, Emmanuil; Nikolaos, Stappas

    2008-05-30

    Although, according to European legislation the use of Asbestos Containing Materials is forbidden, many buildings in Greece still contain asbestos products, which must be removed at some point in the near future. Therefore, suitable disposal sites must be found within Greece, so that the unverified disposal of asbestos waste in municipal waste Landfills is brought to an end. In the present work, an innovative approach to the disposal problem of asbestos wastes in Greece has been examined, through a risk assessment analysis of the inactive asbestos mine of Northern Greece and an evaluation of its suitability as a disposal site for asbestos wastes in the future. According to the research carried out, two areas (Site 1 and Site 2) inside the mine area are suitable for the construction of a disposal site for asbestos wastes. The geological investigations showed that in Site 1 and Site 2 ultrabasic rocks of ophiolite complex were prevalent, which have been intensely serpentinized and converted into the fibrous shape of serpentine (asbestos). Concentrations of hazardous substances such as heavy metals in the soil of Site 1 and Site 2 oscillate at low levels, with the exception of the concentrations of nickel and chrome which are high. The investigative work also included the collection of meteorological data and the monitoring of the water level of the artificial lake, which has developed inside the open mine. The main aim is to safely dispose asbestos wastes inside the mine, to minimize any pollution of the wider vicinity of the mine, as well as to engage in restoration activities.

  11. Journal Article: Localized Pleural Thickening: Smoking and Exposure to Libby Vermiculite

    Science.gov (United States)

    There is limited research on the combined effects of smoking and asbestos exposure on risk of localized pleural thickening (LPT). This analysis uses data from the Marysville cohort of workers occupationally exposed to Libby amphibole asbestos (LAA). Workers were interviewed to ...

  12. FIBER OPTICS: Fibre optics: Forty years later

    Science.gov (United States)

    Dianov, Evgenii M.

    2010-01-01

    This paper presents a brief overview of the state of the art in fibre optics and its main applications: optical fibre communications, fibre lasers and fibre sensors for various physical property measurements. The future of fibre optics and the status of this important area of the modern technology in Russia are discussed.

  13. Re: Evaluation of the size and type of free particulates collected from unused asbestos-containing brake components as related to potential for respirability.

    Science.gov (United States)

    Paustenbach, Dennis J; Finley, Brent L; Sheehan, Patrick J; Brorby, Gregory P

    2006-01-01

    In Atkinson et al. 2004 rinsates of unused brake components were analyzed by transmission electron microscopy (TEM) for the presence of asbestos fibers. We do not believe that the findings of Atkinson et al. are informative and could have been predicted based on the study design and the fact that one would expect to find measurable TEM asbestos fibers on an unused brake component. We also find that the paper did not provide a full or even partial discussion of the published literature with respect to industrial hygiene or epidemiology data. The findings of Atkinson et al. do not, in our view, "further raise concerns" about historical asbestos exposures experienced by automotive mechanics because of the vast amount of published literature to the contrary. Am. J. Ind. Med. 49:60-61, 2006. (c) 2005 Wiley-Liss, Inc.

  14. Accidental discovery of asbestos-related occupational pleural disease in unemployed carpenter: a healthcare safety net that needs mending.

    Science.gov (United States)

    Manfredo, Irena

    2015-09-01

    Unemployed persons are often on the margins of the healthcare system and under the radar of safety and health organisations, as no systematic records are kept of occupational diseases caused by exposure at previous work place. Law in Slovenia requires that asbestos-related occupational diseases are verified by establishing the causal relationship between exposure at work and its effect on the worker. This report describes a case of verifying occupational pleural disease in an unemployed carpenter who was referred for consultation with occupational health specialist as part of the regular procedure for the unemployed registered at the Employment Service of Slovenia. At the consultation it turned out that the carpenter had been exposed to asbestos when he worked as a teenage apprentice. The diagnosis of the bilateral pleural disease and asbestosis was confirmed by X-ray and high-resolution computed tomography. Because he had no record of exposure in that period, we analysed his past working environment for minerals and found chrysotile in all asbestos board samples. The case was presented to an interdisciplinary committee, which verified his disease as occupational. This case points to the need of adopting guidelines for occupational health specialists providing counsel to the national employment service so that the number of unrecorded occupational diseases is minimised and their treatment is covered by the state.

  15. Analysis of glass fibre sizing

    DEFF Research Database (Denmark)

    Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl

    2014-01-01

    Glass fibre reinforced polymer composites are widely used for industrial and engineering applications which include construction, aerospace, automotive and wind energy industry. During the manufacturing glass fibres, they are surface-treated with an aqueous solution. This process and the treated...... surfaces are called sizing. The sizing influences the properties of the interface between fibres and a matrix, and subsequently affects mechanical properties of composites. In this work the sizing of commercially available glass fibres was analysed so as to study the composition and chemical structures....... Soxhlet extraction was used to extract components of the sizing from the glass fibres. The glass fibres, their extracts and coated glass plates were analysed by Thermo-Gravimetric Analysis combined with a mass spectrometer (TGA-MS), and Attenuated Total Reflectance Fourier Transform Infrared (ATR...

  16. Sputter etching of polymer fibres

    International Nuclear Information System (INIS)

    Carter, G.; Hill, A.E.; Nobes, M.J.; Jeffries, R.; Simmens, S.C.

    1979-01-01

    Fibres of polyamide, polyester and an aromatic polyamide (Kevlar) have been subjected to Ar + ion bombardment erosion in an ion accelerator or an rf discharge system. In the case of the former two polymers, cones are observed to develop upon the fibre surface and these are associated with etch protection resulting from the presence of particles of titanium dioxide pigment. This effect is absent in the third, unpigmented, fibre. In all cases ripple structures with a habit transverse to the fibre axes and of wavelength of approximately 1000 Angstrom are gradually developed during ion bombardment. It is suggested that this morphology results from an underlying periodicity of the fibre structure either inherent in the fibre structure or induced by the irradiation. (author)

  17. Kenaf Fibre-RHA Biocomposite: A 'Green' Substitute to Asbestos in ...

    African Journals Online (AJOL)

    tensile strength greater than 262.31 MPa, Young's modulus of not less than 22.94 and failure strain (%) of 2.62 and above) for samples of same dimensions as conventional sheets. Friedman statistical analysis showed that an increase or addition of ...

  18. Calcium binding by dietary fibre

    International Nuclear Information System (INIS)

    James, W.P.T.; Branch, W.J.; Southgate, D.A.T.

    1978-01-01

    Dietary fibre from plants low in phytate bound calcium in proportion to its uronic-acid content. This binding by the non-cellulosic fraction of fibre reduces the availability of calcium for small-intestinal absorption, but the colonic microbial digestion of uronic acids liberates the calcium. Thus the ability to maintain calcium balance on high-fibre diets may depend on the adaptive capacity on the colon for calcium. (author)

  19. Development of Asbestos - Free Brake Pad Using Bagasse

    Directory of Open Access Journals (Sweden)

    V. S. Aigbodion

    2010-03-01

    Full Text Available Development of asbestos-free brake pad using bagasse was investigated with a view to replace the use of asbestos whose dust is carcinogenic. The bagasse were sieve into sieve grades of 100, 150, 250, 350 and 710µm. the sieve bagasse was used in production of brake pad in ratio of 70%bagasse-30%resin using compression moulding. The properties examined are microstructure analysis, hardness, compressive strength, density, flame resistance, water and oil absorption. The microstructure reveals uniform distribution of resin in the bagasse. The results obtained showed that the finer the sieve size the better the properties. The results obtained in this work were compared with that of commercial brake pad (asbestos based and optimum formulation laboratory brake pad Palm Kernel Shell based (PKS, the results are in close agreement. Hence bagasse can be used in production of asbestos-free brake pad.

  20. Advanced Fibre Based Energy Storage

    Science.gov (United States)

    Reid, Daniel Oliver

    New energy storage devices are required to enable future technologies. With the rise of wearable consumer and medical devices, a suitable flexible and wearable means of storing electrical energy is required. Fibre-based devices present a possible method of achieving this aim. Fibres are inherently more flexible than their bulk counterparts, and as such can be employed to form the electrodes of flexible batteries and capacitors. They also present a facile possibility for incorporation into many fabrics and clothes, further boosting their potential for use in wearable devices. Electrically conducting fibres were produced from a dispersion of carbon nanomaterials in a room temperature ionic liquid. Coagulation of this dispersion was achieved through manual injection into aqueous solutions of xanthan gum. The limitations of this method are highlighted by very low ultimate tensile strengths of these fibres, in the order of 3 MPa, with high variation within all of the fibres. Fibres were also produced via scrolling of bi-component films containing poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and poly(vinyl alcohol) (PVA). Chemical treatments were employed to impart water compatibility to these fibres, and their electrochemical, physical and electrical properties were analysed. Fibres were wet spun from two PEDOT:PSS sources, in several fibre diameters. The effect of chemical treatments on the fibres were investigated and compared. Short 5 min treatment times with dimethyl sulfoxide (DMSO) on 20 mum fibres produced from Clevios PH1000 were found to produce the best overall treatment. Up to a six-fold increase in electrical conductivity resulted, reaching 800 S cm-1, with up to 40 % increase in specific capacitance and no loss of mechanical strength (55 F g-1 and 150 MPa recorded). A wet spinning system to produce PEDOT:PSS fibres containing functionalised graphenes and carbon nanotubes, as well as birnessite nanotubes was subsequently developed

  1. The asbestos cement container and its characterization program

    International Nuclear Information System (INIS)

    Kertesz, C.; Oliver, J.; Jaouen, C.

    1986-01-01

    A new type of packing container is designed in France, by SGN, for the reprocessing wastes conditioning: the asbestos cement container (CAC) made by the industrial process for pipes fabrication. Two types of CAC are studied, differing from each other by their wall thickness. The technology of which SGN is in charge is presented. A characterization program is operated by CEA in view of satisfying to regulatory requirements. Emphasis is placed upon the radionuclides migration study, through different asbestos cement samples

  2. An updated historical cohort mortality study of workers exposed to asbestos in a refitting shipyard, 1947-2007.

    Science.gov (United States)

    Tomioka, Kimiko; Natori, Yuji; Kumagai, Shinji; Kurumatani, Norio

    2011-12-01

    To evaluate the long-term health effects of occupational asbestos exposure, an updated historical cohort mortality study of workers at a refitting shipyard was undertaken. The cohort consisted of 249 male ship repair workers (90 laggers, 159 boiler repairers). To determine relative excess mortality, standardized mortality ratios (SMRs) were calculated using mortality rates among the Japanese male population. Mortality follow-up of study subjects was performed for the period from 1947 till the end of 2007. We identified the vital status of 87 (96.7%) laggers and 150 (94.3%) boiler repairers. Of these, 63 (72.4%) and 95 (63.3%), respectively, died. Laggers, who had handled asbestos materials directly, showed a significantly elevated SMR of 2.64 (95% confidence interval [CI]: 1.06-5.44) for lung cancer and 2.49 (95% CI: 1.36-4.18) for nonmalignant respiratory diseases. Boiler repairers, who had many opportunities for secondary exposure to asbestos and a few for direct exposure, showed no significant elevation in SMR for lung cancer but a significantly elevated SMR of 1.78 (95% CI: 1.06-2.81) for nonmalignant respiratory diseases. In an analysis according to duration of employment, there was a significantly elevated SMR of nonmalignant respiratory diseases in the longer working years group. Among workers from both jobs, no deaths caused by mesothelioma in addition to those in the original study were found and no subject died from larynx cancer. This updated study confirmed a significant excess of asbestos-related mortality from diseases such as lung cancer and nonmalignant respiratory diseases among workers in a refitting shipyard in Japan.

  3. Calculations of risk: regulation and responsibility for asbestos in social housing.

    Science.gov (United States)

    Waldman, Linda; Williams, Heather

    2013-01-01

    This paper examines questions of risk, regulation, and responsibility in relation to asbestos lodged in UK social housing. Despite extensive health and safety legislation protecting against industrial exposure, very little regulatory attention is given to asbestos present in domestic homes. The paper argues that this lack of regulatory oversight, combined with the informal, contractual, and small-scale work undertaken in domestic homes weakens the basic premise of occupational health and safety, namely that rational decision-making, technical measures, and individual safety behavior lead concerned parties (workers, employers, and others) to minimize risk and exposure. The paper focuses on UK council or social housing, examining how local housing authorities - as landlords - have a duty to provide housing, to protect and to care for residents, but points out that these obligations do not extend to health and safety legislation in relation to DIY undertaken by residents. At the same time, only conventional occupational health and safety, based on rationality, identification, containment, and protective measures, cover itinerant workmen entering these homes. Focusing on asbestos and the way things work in reality, this paper thus explores the degree to which official health and safety regulation can safeguard maintenance and other workers in council homes. It simultaneously examines how councils advise and protect tenants as they occupy and shape their homes. In so doing, this paper challenges the notion of risk as an objective, scientific, and effective measure. In contrast, it demonstrates the ways in which occupational risk - and the choice of appropriate response - is more likely situational and determined by wide-ranging and often contradictory factors.

  4. [Railway use of asbestos-containing rubble: environmental hygienic aspects].

    Science.gov (United States)

    Kaptsov, V A; Kashanskiĭ, S V; Domnin, S G; Tikhova, T S; Trofimova, E V; Novoselova, T A; Bogdanov, G B

    2003-01-01

    The paper presents the results of a study of the gravimetric and counting concentrations of respirable asbestos fibers while working with sand-and-crushed stone mixtures, obtained from the concentration of chrysotile asbestos, at distances of 25, 50, and 100 m from the working place, as well as in a car saloon when the electric train passes along the area of these operations following an hour, a day, and a year after the completion of work, in warm and colds seasons of a year. It is concluded that the use of asbestos-containing sand-and-crushed stone mixtures on the railway leads to a higher anthropogenic asbestos load on the population living in the railway right-of-way, on railway workers and passengers. In this connection, it is necessary to evaluate risk factors of asbestos-induced diseases among the above contingents. The authors consider that due to the fact that asbestos-containing sand-and-crushed stone mixtures are well wetted with water, followed by the formation of a firm surface crust that prevents dust formation, as well as the short duration and rare frequency of operations relating their change, it is necessary to irrigate the repair areas with water or surfactant liquids after work termination.

  5. Laser-induced breakdown spectroscopy analysis of asbestos

    International Nuclear Information System (INIS)

    Caneve, L.; Colao, F.; Fabbri, F.; Fantoni, R.; Spizzichino, V.; Striber, J.

    2005-01-01

    Laser-induced breakdown spectroscopy was applied to test the possibility of detecting and identifying asbestos in different samples in view of the perspective at field operation without sample preparation which is peculiar to this technique. Several like-resin materials were first investigated by laser-induced breakdown spectroscopy, in order to find an asbestos container assuring safe laboratory operation during the material characterization aimed to identify indicators suitable for a quick identification on field. Successively, spectra of asbestos samples of both in serpentine and amphibole forms were measured and the variability in elemental composition was calculated from the emission spectra. Ratios of intensities of characteristic elements were tested as indicators for asbestos recognition. Laser-induced breakdown spectroscopy results were compared with those obtained by analyzing the same asbestos samples with a scanning electron microscopy equipped with an energy dispersive X-ray spectroscopy, a good correlation was found for Mg/Si and Fe/Si, thus showing the capability of laser-induced breakdown spectroscopy as a diagnostic tool for this category of materials. In particular, it was demonstrated that the method based on two indicators derived from laser-induced breakdown spectroscopy intensity ratios allows to discriminate between asbestos and cements in single shot measurements suitable to field operation

  6. Creep properties of discontinuous fibre composites with partly creeping fibres

    International Nuclear Information System (INIS)

    Bilde-Soerensen, J.B.; Lilholt, H.

    1977-05-01

    In a previous report (RISO-M-1810) the creep properties of discontinuous fibre composites with non-creeping fibres were analyzed. In the present report this analysis is extended to include the case of discontinuous composites with partly creeping fibres. It is shown that the creep properties of the composite at a given strain rate, epsilonsub(c), depend on the creep properties of the matrix at a strain rate higher than epsilonsub(c), and on the creep properties of the fibres at epsilonsub(c). The composite creep law is presented in a form which permits a graphical determination of the composite creep curve. This can be constructed on the basis of the matrix and the fibre creep curves by vector operations in a log epsilon vs. log sigma diagram. The matrix contribution to the creep strength can be evaluated by a simple method. (author)

  7. Scintillating-fibre calorimetry

    International Nuclear Information System (INIS)

    Livan, M.; Vercesi, V.; Wigmans, R.

    1995-01-01

    In the past decade, calorimetry based on scintillating plastic fibres as active elements was developed from a conceptual idea to a mature detector technology, which is nowadays widely applied in particle physics experiments. This development and the performance characteristics of representative calorimeters, both for the detection of electromagnetic and hadronic showers, are reviewed. We also discuss new information on shower development processes in dense matter and its application to calorimetric principles that has emerged from some very thorough studies that were performed in the framework of this development. (orig.)

  8. Properties of hemp fibre polymer composites - An optimisation of fibre properties using novel defibration methods and fibre characterisation

    DEFF Research Database (Denmark)

    Thygesen, Anders

    2006-01-01

    Characterization of hemp fibres was carried out with fibres obtained with low handling damage and defibration damage to get an indication of how strong cellulose based fibres that can be produced from hemp. Comparison was made with hemp yarn producedunder traditional conditions where damage...... obtained by steam explosion of hemp fibres prior defibrated with pectin degrading enzymes. The S2 layer in the fibre wall of the hemp fibres consisted of1-4 cellulose rich and lignin poor concentric layers constructed of ca. 100 nm thick lamellae. The microfibril angle showed values in the range 0......-10° for the main part of the S2-layer and 70-90° for the S1-layer. The microfibrils that are mainly parallelwith the fibre axis explain the high fibre stiffness, which in defibrated hemp fibres reached 94 GPa. The defibrated hemp fibres had higher fibre stiffness (88-94 GPa) than hemp yarn (60 GPa), which...

  9. A genetic variant of NLRP1 gene is associated with asbestos body burden in patients with malignant pleural mesothelioma.

    Science.gov (United States)

    Crovella, S; Moura, R R; Cappellani, S; Celsi, F; Trevisan, E; Schneider, M; Brollo, A; Nicastro, E M; Vita, F; Finotto, L; Zabucchi, G; Borelli, V

    2018-01-01

    The presence of asbestos bodies (ABs) in lung parenchyma is considered a histopathologic hallmark of past exposure to asbestos fibers, of which there was a population of longer fibers. The mechanisms underlying AB formation are complex, involving inflammatory responses and iron (Fe) metabolism. Thus, the responsiveness to AB formation is variable, with some individuals appearing to be poor AB formers. The aim of this study was to disclose the possible role of genetic variants of genes encoding inflammasome and iron metabolism proteins in the ability to form ABs in a population of 81 individuals from North East Italy, who died after having developed malignant pleural mesothelioma (MPM). This study included 86 genetic variants distributed in 10 genes involved in Fe metabolism and 7 genetic variants in two genes encoding for inflammasome molecules. Genotypes/haplotypes were compared according to the number of lung ABs. Data showed that the NLRP1 rs12150220 missense variant (H155L) was significantly correlated with numbers of ABs in MPM patients. Specifically, a low number of ABs was detected in individuals carrying the NLRP1 rs12150220 A/T genotype. Our findings suggest that the NLRP1 inflammasome might contribute in the development of lung ABs. It is postulated that the NLRP1 missense variant may be considered as one of the possible host genetic factors contributing to individual variability in coating efficiency, which needs to be taken when assessing occupational exposure to asbestos.

  10. Fibre-optic temperature sensor

    International Nuclear Information System (INIS)

    Zhao Jie; Liu Zhenyuan.

    1993-04-01

    This experiment is a kind of nonfunction fibre-optic temperature sensor. It utilizes high-sensitive bimetallic strip for element of measuring temperature. The changing of bimetallic strip alterates intensity of light through fibre-optic. This equipment is simple in structure, subtle in design, extensive in application, and so on. (author). 4 refs, 6 figs, 1 tab

  11. Current status of natural fibres

    CSIR Research Space (South Africa)

    Anandjiwala, RD

    2006-12-01

    Full Text Available Fiber Selection Conference, 17-19 May 1999, Greenville, SC, USA. 16. Sankari, H.S. 2000. Comparison of bast fibre yield and mechanical fibre properties of hemp (Cannabis sativa L.) cultivars. Industrial Crops and Products (11) 1: 73-84. 17. W...

  12. Design of DFB fibre lasers

    DEFF Research Database (Denmark)

    Lauridsen, Vibeke Claudia; Povlsen, Jørn Hedegaard; Varming, Poul

    1998-01-01

    A numerical model for erbium distributed feedback (DFB) fibre lasers is presented. The model is used to optimise the location of a discrete phase-shift to obtain maximum output power. For DFB fibre lasers of up to 10cm in length it is shown that the influence of Kerr nonlinearity with respect to ...... to output power is negligible....

  13. Composition of microfouling on aluminium and fibre glass panels exposed in Agatti waters (Lakshadweep Island)

    Digital Repository Service at National Institute of Oceanography (India)

    Raveendran, T.V.; Sankaran, P.D.; Wagh, A.B.

    Rate of microfouling build-up was high during the initial periods of exposure of test surfaces but decreased with the increasing duration. Fibre glass surfaces showed higher deposition than those of aluminium. Carbohydrates and lipids were the major...

  14. Recycling of asbestos tailings used as reinforcing fillers in polypropylene based composites.

    Science.gov (United States)

    Zhai, Wensi; Wang, Yao; Deng, Yuan; Gao, Hongli; Lin, Zhen; Li, Mao

    2014-04-15

    In this work, asbestos tailings were recycled and used as reinforcing fillers to enhance the mechanical properties of polypropylene (PP). A silane coupling agent was used to chemically modify the asbestos tailings to increase the compatibility between asbestos tailings and polypropylene matrix. Both raw and chemically treated asbestos tailings with different loading levels (from 3 to 30 wt%) were utilized to fabricate composites. Mechanical properties of these composites have been investigated by dynamic mechanical analysis, tensile test and notched impact test. Results showed that hybridization of asbestos tailings in the composites enhanced the mechanical properties of neat PP evidently, and treated asbestos tailings/PP composites yielded even better mechanical properties compared with those of raw asbestos tailings/PP composites. This recycling method of asbestos tailings not only reduces disposal costs and avoids secondary pollution but also produces a new PP-based composite material with enhanced mechanical properties. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Random distributed feedback fibre lasers

    Energy Technology Data Exchange (ETDEWEB)

    Turitsyn, Sergei K., E-mail: s.k.turitsyn@aston.ac.uk [Aston Institute of Photonic Technologies, Aston University, Birmingham B4 7ET (United Kingdom); Novosibirsk State University, 2 Pirogova str., 630090, Novosibirsk (Russian Federation); Babin, Sergey A. [Novosibirsk State University, 2 Pirogova str., 630090, Novosibirsk (Russian Federation); Institute of Automation and Electrometry SB RAS, 1 Ac. Koptug. ave., 630090, Novosibirsk (Russian Federation); Churkin, Dmitry V. [Aston Institute of Photonic Technologies, Aston University, Birmingham B4 7ET (United Kingdom); Novosibirsk State University, 2 Pirogova str., 630090, Novosibirsk (Russian Federation); Institute of Automation and Electrometry SB RAS, 1 Ac. Koptug. ave., 630090, Novosibirsk (Russian Federation); Vatnik, Ilya D.; Nikulin, Maxim [Institute of Automation and Electrometry SB RAS, 1 Ac. Koptug. ave., 630090, Novosibirsk (Russian Federation); Podivilov, Evgenii V. [Novosibirsk State University, 2 Pirogova str., 630090, Novosibirsk (Russian Federation); Institute of Automation and Electrometry SB RAS, 1 Ac. Koptug. ave., 630090, Novosibirsk (Russian Federation)

    2014-09-10

    The concept of random lasers exploiting multiple scattering of photons in an amplifying disordered medium in order to generate coherent light without a traditional laser resonator has attracted a great deal of attention in recent years. This research area lies at the interface of the fundamental theory of disordered systems and laser science. The idea was originally proposed in the context of astrophysics in the 1960s by V.S. Letokhov, who studied scattering with “negative absorption” of the interstellar molecular clouds. Research on random lasers has since developed into a mature experimental and theoretical field. A simple design of such lasers would be promising for potential applications. However, in traditional random lasers the properties of the output radiation are typically characterized by complex features in the spatial, spectral and time domains, making them less attractive than standard laser systems in terms of practical applications. Recently, an interesting and novel type of one-dimensional random laser that operates in a conventional telecommunication fibre without any pre-designed resonator mirrors–random distributed feedback fibre laser–was demonstrated. The positive feedback required for laser generation in random fibre lasers is provided by the Rayleigh scattering from the inhomogeneities of the refractive index that are naturally present in silica glass. In the proposed laser concept, the randomly backscattered light is amplified through the Raman effect, providing distributed gain over distances up to 100 km. Although an effective reflection due to the Rayleigh scattering is extremely small (∼0.1%), the lasing threshold may be exceeded when a sufficiently large distributed Raman gain is provided. Such a random distributed feedback fibre laser has a number of interesting and attractive features. The fibre waveguide geometry provides transverse confinement, and effectively one-dimensional random distributed feedback leads to the

  16. Random distributed feedback fibre lasers

    International Nuclear Information System (INIS)

    Turitsyn, Sergei K.; Babin, Sergey A.; Churkin, Dmitry V.; Vatnik, Ilya D.; Nikulin, Maxim; Podivilov, Evgenii V.

    2014-01-01

    The concept of random lasers exploiting multiple scattering of photons in an amplifying disordered medium in order to generate coherent light without a traditional laser resonator has attracted a great deal of attention in recent years. This research area lies at the interface of the fundamental theory of disordered systems and laser science. The idea was originally proposed in the context of astrophysics in the 1960s by V.S. Letokhov, who studied scattering with “negative absorption” of the interstellar molecular clouds. Research on random lasers has since developed into a mature experimental and theoretical field. A simple design of such lasers would be promising for potential applications. However, in traditional random lasers the properties of the output radiation are typically characterized by complex features in the spatial, spectral and time domains, making them less attractive than standard laser systems in terms of practical applications. Recently, an interesting and novel type of one-dimensional random laser that operates in a conventional telecommunication fibre without any pre-designed resonator mirrors–random distributed feedback fibre laser–was demonstrated. The positive feedback required for laser generation in random fibre lasers is provided by the Rayleigh scattering from the inhomogeneities of the refractive index that are naturally present in silica glass. In the proposed laser concept, the randomly backscattered light is amplified through the Raman effect, providing distributed gain over distances up to 100 km. Although an effective reflection due to the Rayleigh scattering is extremely small (∼0.1%), the lasing threshold may be exceeded when a sufficiently large distributed Raman gain is provided. Such a random distributed feedback fibre laser has a number of interesting and attractive features. The fibre waveguide geometry provides transverse confinement, and effectively one-dimensional random distributed feedback leads to the

  17. 40 CFR 427.40 - Applicability; description of the asbestos paper (elastomeric binder) subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos paper (elastomeric binder) subcategory. 427.40 Section 427.40 Protection of Environment... SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.40 Applicability; description of the asbestos paper (elastomeric binder) subcategory. The provisions of this subpart are applicable to...

  18. ENGINEERING CONTROL PRACTICES FOR REDUCING EMISSIONS DURING DRILLING OF ASBESTOS-CONTAINING FLOORING MATERIALS

    Science.gov (United States)

    This report describes the implementation and testing of control measures to reduce airborne asbestos generated by the drilling of asbestos-containing flooring materials, an OSHA Class III asbestos maintenance activity. Bosch 11224 and 11222 rotary drills were fitted with shrouds ...

  19. 40 CFR 61.149 - Standard for waste disposal for asbestos mills.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for waste disposal for asbestos mills. 61.149 Section 61.149 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Standard for Asbestos § 61.149 Standard for waste disposal for asbestos mills. Each owner or operator of...

  20. Microstructured Optical Fibres

    DEFF Research Database (Denmark)

    1999-01-01

    The present invention relates to a new class of optical waveguides, in which waveguiding along one or more core regions is obtained through the application of the Photonic Bandgap (PBG) effect. The invention further relates to optimised two-dimensional lattice structures capable of providing......, which are easy to manufacture. Finally, the present invention relates to a new fabrication technique, which allows easy manufacturing of preforms for photonic crystal fibers with large void filling fractions, as well as it allows a high flexibility in the design of the cladding and core structures....... complete PBGs, which reflects light incident from air or vacuum. Such structures may be used as cladding structures in optical fibres, where light is confined and thereby guided in a hollow core region. In addition, the present invention relates to designs for ultra low-loss PBG waveguiding structures...

  1. Fibre intake and the development of inflammatory bowel disease

    DEFF Research Database (Denmark)

    Andersen, Vibeke; Chan, Simon; Luben, Robert

    2018-01-01

    Background and Aims: Population-based prospective cohort studies investigating fibre intake and development of inflammatory bowel disease are lacking. Our aim was to investigate the association between fibre intake and the development of Crohn's disease [CD] and ulcerative colitis [UC] in a large...... for the development of inflammatory bowel disease. Each case was matched with four controls and odds ratios [ORs] for the exposures were calculated using conditional logistic regression. Sensitivity analyses according to smoking status were computed. Results: In total, 104 and 221 participants developed incident CD...

  2. Electromagnetic mixed waste processing system for asbestos decontamination

    International Nuclear Information System (INIS)

    Kasevich, R.S.; Nocito, T.; Vaux, W.G.; Snyder, T.

    1994-01-01

    DOE sites contain a broad spectrum of asbestos materials (cloth, pipe lagging, sprayed insulation and other substances) which are contaminated with a combination of hazardous and radioactive wastes due to its use during the development of the US nuclear weapons complex. These wastes consist of cutting oils, lubricants, solvents, PCBs, heavy metals and radioactive contaminants. The radioactive contaminants are the activation, decay, and fission products of DOE operations. To allow disposal, the asbestos must be converted chemically, followed by removing and separating the hazardous and radioactive materials to prevent the formation of mixed wastes and to allow for both sanitary disposal and effective decontamination. Currently, no technology exists that can meet these sanitary and other objectives. An attempt was made to apply techniques that have already proved successful in the mining, oil, and metals processing industries to the development of a multi-stage process to remove and separate hazardous chemical radioactive materials from asbestos. This process uses three methods: ABCOV chemicals which converts the asbestos to a sanitary waste; dielectric heating to volatilize the organic materials; and electrochemical processing for the removal of heavy metals, RCRA wastes and radionuclides. This process will result in the destruction of over 99% of the asbestos; limit radioactive metal contamination to 0.2 Bq alpha per gram and 1 Bq beta and gamma per gram; reduce hazardous organics to levels compatible with current EPA policy for RCRA delisting; and achieve TCLP limits for all solidified waste

  3. Asbestos removal and disposal information system: a user's guide

    International Nuclear Information System (INIS)

    Knight, P.S.; Eisenhower, B.M.

    1982-10-01

    Program ASBS01, written for the staff of the Department of Environmental Management (DEM) at Oak Ridge National Laboratory (ORNL), is an on-line management information system that provides file maintenance and information retrievability for demolition and/or renovation operations involving friable (capable of becoming an airborne health hazard) asbestos material at the Laboratory. System 1022 is the data base management system used. The screen processor SCOPE provides the DEM staff with system prompts for ease of use and data integrity. Data for the system comes from two UCN forms: (1) Notice of Intention to Demolish or Renovate Friable Asbestos Material (UCN-13385) and (2) Request for the Disposal of Asbestos or Material Containing Asbestos (UCN-13386). Examples of the forms are in Appendix A. Data is entered into the system as requests are submitted to DEM. Total amounts of friable asbestos removed in demolition and/or renovation operations can be generated by the program upon user request. These totals are submitted in a quarterly report to the Environmental Protection Branch of the US Department of Energy (DOE) on a continuing basis (see Appendix B). This report describes the operation of the computer program ASBS01 from data entry to generation of totals. Each data attribute of the master file ASBSTO.DMS is described in detail, and a sample session is given for user reference

  4. Luminescent Solar Concentrators with Fibre Geometry

    NARCIS (Netherlands)

    Edelenbosch, O.Y.; Fisher, M.; Patrignani, L.; Sark, W.G.J.H.M. van; Chatten, A.J.

    2013-01-01

    The potential of a fibre luminescent solar concentrator has been explored by means of both analytical and ray-tracing techniques. Coated fibres have been found to be more efficient than homogeneously doped fibres, at low absorption. For practical fibres concentration is predicted to be linear

  5. Dispersion properties of photonic crystal fibres

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Broeng, Jes; Dridi, Kim

    1998-01-01

    Approximate dispersion and bending properties of all-silica two-dimensional photonic crystal fibres are characterised by the combination of an effective-index model and classical analysis tools for optical fibres. We believe for the first time to have predicted the dispersion properties of photonic...... crystal fibres. The results strongly indicate that these fibres have potential applications as dispersion managing components...

  6. The Influence of Fibre Content on the Performance of Steel Fibre ...

    African Journals Online (AJOL)

    The Influence of Fibre Content on the Performance of Steel Fibre Refractory Concrete. ... Little information is available on the effect of fibre content on refractory performance and in particular resistance to thermal shock. This study has examined the influence of fibre content of stainless steel melt extract fibres on the ...

  7. WTO confidential: the case of asbestos.

    Science.gov (United States)

    Castleman, Barry

    2003-01-01

    The World Trade Organization (WTO), established in 1995, adjudicates "trade disputes" between member nations in cases with human rights, cultural, environmental, and public health significance. Throughout the resolution process and even after a case's conclusion, little of what happens is made accessible to the public. However, it is one thing to criticize the WTO for its lack of transparency from outside the process and another to critically examine what was withheld from disclosure and what dangers that presents. This is the inside story from a scientific adviser to one party in a WTO case, who analyzes what happened from a public health point of view. The analysis concludes that the public health justification for banning asbestos was accepted in the end by WTO economists, despite the WTO's bias in favor of the party (Canada) making the free trade challenge (to public health legislation), despite the WTO's lack of expertise in science, medicine, engineering, and public health, and despite important erroneous statements made to the WTO under the cover of confidentiality. The case nevertheless illustrates that the WTO's threat to national sovereignty could never withstand the light of day if the limitations and dangers of the process were open for all to see.

  8. Fibre Bragg grating and no-core fibre sensors

    CERN Document Server

    Daud, Suzairi

    2018-01-01

    This book focuses on the development and set-up of fibre Bragg grating (FBG) and no-core fibre (NCF) sensors. It discusses the properties of the sensors and modelling of the resulting devices, which include electronic, optoelectronic, photovoltaic, and spintronic devices. In addition to providing detailed explanations of the properties of FBG and NCF sensors, it features a wealth of instructive illustrations and tables, helping to visualize the respective devices’ functions.

  9. Aligned flax fibre/polylactate composites

    DEFF Research Database (Denmark)

    Madsen, Bo; Lilholt, Hans; Thygesen, Anders

    2008-01-01

    The potential of biocomposites in engineering applications is demonstrated by using aligned flax fibre/polylactate composites as a materials model system. The failure stress of flax fibres is measured by tensile testing of single fibres and fibre bundles. For both fibre configurations, it is found...... that failure stress is decreased by increasing the tested fibre volume. Based on two types of flax fibre preforms: carded sliver and unidirectional non-crimp fabric, aligned flax fibre/polylactate composites were fabricated with variable fibre content. The volumetric composition and tensile properties...... of the composite were measured. For composites with a fibre content of 37 % by volume, stiffness is about 20 GPa and failure stress is about 180 MPa. The tensile properties of the composites are analysed with a modified rule of mixtures model, which includes the effect of porosity. The experimental results...

  10. Development of SERS active fibre sensors

    International Nuclear Information System (INIS)

    Polwart, Ewan

    2002-01-01

    Surface-enhanced Raman scattering (SERS) is sensitive and selective and when coupled with fibre-optics could potentially produce an effective chemical sensing system. This thesis concerns the development of a single-fibre-based sensor, with an integral SERS-active substrate. A number of different methods for the manufacture of SERS-active surfaces on glass substrates were investigated and compared. The immobilisation of metal nanoparticles on glass functionalised with (3-aminopropyl)trimethoxysilane emerged as a suitable approach for the production of sensors. Substrates prepared by this approach were characterised using UV-visible spectroscopy, electron microscopy and Raman mapping. It was found that exposure of substrates to laser radiation led to a decrease in the signal recorded from adsorbed analytes. This speed of the decrease was shown to depend on the analyte, and the exciting wavelength and power. SERS-active fibre sensors were produced by immobilisation of silver nanoparticles at the distal end of a (3-aminopropyl)trimethoxysilane-derivatised optical fibre. These sensors were used to obtain spectra with good signal to noise ratios from 4-(benzotriazol-5-ylazo)-3,5-dimethoxyphenylamine and crystal violet. Sensing of dyes in effluent was also investigated. The development of sensors for the measurement of pH, by treating the SERS-active fibre tip with pH sensitive dyes is also described. Spectral changes were observed with these sensors as a response to the pH. Partial least squares regression was used to produce linear calibration models for the pH range 5-11 from which it was possible to predict the pH with an accuracy of ∼0.2 pH units. Some of the limitations of these sensors were explored. The feasibility of using these sensors for measurement of oxygen and thiols, was investigated. The measurement of oxygen using methylene blue as a transducer was demonstrated. Two transduction methodologies--reactions with iron porphyrins and pyrrole-2,5-diones

  11. The Chemical Composition of Grape Fibre

    OpenAIRE

    Jolana Karovičová; Zlatica Kohajdová; Lucia Minarovičová; Veronika Kuchtová

    2015-01-01

    Dietary fibres from cereals are much more used than dietary fibres from fruits; however, dietary fibres from fruits have better quality. In recent years, for economic and environmental reasons, there has been a growing pressure to recover and exploit food wastes. Grape fibre is used to fortify baked goods, because the fibre can lower blood sugar, cut cholesterol and may even prevent colon cancer. Grape pomace is a functional ingredient in bakery goods to increase total phenolic content and di...

  12. DEPOSITION OF NICKEL ON CARBON FIBRES BY GALVANIC METHOD

    Directory of Open Access Journals (Sweden)

    Pavol Štefánik

    2012-01-01

    Full Text Available The investigation of coating parameters in quasi-static coating of Ni layer on carbon fibre tow by galvanic method is presented. The tow of fibres was immersed in typical galvanic bath based on NiSO4, NiCl2, Na2SO4 and H3BO3 and current to carbon fibres was supplied by two leading metal rolls which are parts of continuous coating apparatus. The main parameters were current of 1 A, electrolyte temperature of 50 °C and the distance from power contacts to level of galvanic bath (8 or 13 cm. The amount and structure of deposited Ni layer at coating time 15 and 90 seconds of exposure in electrolyte and depth of immersion of tow into bath were discussed.

  13. Structural and microstructural aspects of asbestos-cement waste vitrification

    Science.gov (United States)

    Iwaszko, Józef; Zawada, Anna; Przerada, Iwona; Lubas, Małgorzata

    2018-04-01

    The main goal of the work was to evaluate the vitrification process of asbestos-cement waste (ACW). A mixture of 50 wt% ACW and 50 wt% glass cullet was melted in an electric furnace at 1400 °C for 90 min and then cast into a steel mold. The vitrified product was subjected to annealing. Optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) were used to evaluate the effects of the vitrification. The chemical constitution of the material before and after the vitrification process was also analyzed. It was found that the vitrified product has an amorphous structure in which the components of asbestos-cement waste are incorporated. MIR spectroscopy showed that the absorption bands of chrysotile completely disappeared after the vitrification process. The results of the spectroscopic studies were confirmed by X-ray studies - no diffraction reflections from the chrysotile crystallographic planes were observed. As a result of the treatment, the fibrous asbestos construction, the main cause of its pathogenic properties, completely disappeared. The vitrified material was characterized by higher resistance to ion leaching in an aquatic environment than ACW and a smaller volume of nearly 72% in relation to the apparent volume of the substrates. The research has confirmed the high effectiveness of vitrification in neutralizing hazardous waste containing asbestos and the FT-IR spectroscopy was found to be useful to identify asbestos varieties and visualizing changes caused by the vitrification process. The work also presents the current situation regarding the utilization of asbestos-containing products.

  14. Temporal trend, geographic distribution, and publication quality in asbestos research.

    Science.gov (United States)

    Ugolini, Donatella; Bonassi, Stefano; Cristaudo, Alfonso; Leoncini, Giacomo; Ratto, Giovanni Battista; Neri, Monica

    2015-05-01

    Asbestos is a well-known cause of cancer and respiratory diseases. The aim of the current study was to investigate the scientific production in asbestos research evaluating temporal trend, geographic distribution, impact factor (IF) of published literature, and taking into account socioeconomic variables. The PubMed database was searched starting from 1970. Publication numbers and IF were evaluated as absolute values and after standardization by population and gross domestic product (GDP). Six thousand nine hundred seven articles related to asbestos were retrieved. Publications grew steeply in the 1970s, leveled off in the 1980s, decreased in the 1990s, and then increased again. Mesothelioma, lung neoplasms, and occupational diseases are the most commonly used keywords. In the period of 1988-2011, 4220 citations were retrieved, 3187 of whom had an impact factor. The US, Italy, and the UK were the most productive countries. European countries published about 20 % more asbestos-related articles than the US, although the latter reached a higher mean IF, ranking second after Australia. When the national scientific production (sum of IF) was compared taking into account socioeconomic variables, Australia and Scandinavian countries performed very well, opposite to all main asbestos producers like Russia, China, and Brazil (except for Canada). The American Journal of Industrial Medicine and the Italian La Medicina del Lavoro published the highest numbers of articles. This study provides the first bibliometric analysis of scientific production in asbestos research. Interest appears to be higher in selected countries, with strong national features, and is growing again in the new millennium.

  15. Modeling of photonic Crystal Fibres

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Broeng, Jes; Barkou, Stig Eigil

    1999-01-01

    Diferent theoretical models for analysis of photonic crystal fibres are reviewed and compaired. The methods span from simple scalar approaches to full-vectorial models using different mode-field decompositions. The specific advantages of the methods are evaluated.......Diferent theoretical models for analysis of photonic crystal fibres are reviewed and compaired. The methods span from simple scalar approaches to full-vectorial models using different mode-field decompositions. The specific advantages of the methods are evaluated....

  16. Electromagnetic mixed waste processing system for asbestos decontamination

    International Nuclear Information System (INIS)

    Kasevich, R.S.; Vaux, W.G.; Nocito, T.

    1995-01-01

    DOE sites contain a broad spectrum of asbestos materials (cloth, pipe lagging, sprayed insulation and other substances) which are contaminated with a combination of hazardous and radioactive wastes due to its use during the development of the U.S. nuclear weapons complex. These wastes consist of cutting oils, lubricants, solvents, PCB's, heavy metals and radioactive contaminants. The radioactive contaminants are the activation, decay and fission products of DOE operations. The asbestos must be converted by removing and separating the hazardous and radioactive materials to prevent the formation of mixed wastes and to allow for both sanitary disposal and effective decontamination. Currently, no technology exists that can meet these sanitary and other objectives

  17. The Chemical Composition of Grape Fibre

    Directory of Open Access Journals (Sweden)

    Jolana Karovičová

    2015-05-01

    Full Text Available Dietary fibres from cereals are much more used than dietary fibres from fruits; however, dietary fibres from fruits have better quality. In recent years, for economic and environmental reasons, there has been a growing pressure to recover and exploit food wastes. Grape fibre is used to fortify baked goods, because the fibre can lower blood sugar, cut cholesterol and may even prevent colon cancer. Grape pomace is a functional ingredient in bakery goods to increase total phenolic content and dietary fibre in nourishment. The aim of this study was to determine the chemical composition of commercial fibres, obtained from different Grape sources concerning their chemical properties such as moisture, ash, fat, protein, total dietary fibre. The chemical composition of Grape fibre is known to vary depending on the Grape cultivar, growth climates, and processing conditions. The obliged characteristics of the fibre product are: total dietary fibre content above 50%, moisture lower than 9%, low content of lipids, a low energy value and neutral flavour and taste. Grape pomace represents a rich source of various high-value products such as ethanol, tartrates and malates, citric acid, Grape seed oil, hydrocolloids and dietary fibre. Used commercial Grape fibres have as a main characteristic, the high content of total dietary fibre. Amount of total dietary fibre depends on the variety of Grapes. Total dietary fibre content (TDF in our samples of Grape fibre varied from 56.8% to 83.6%. There were also determined low contents of moisture (below 9%. In the samples of Grape fibre were determined higher amount of protein (8.6 - 10.8%, mineral (1.3 - 3.8% and fat (2.8 - 8.6%. This fact opens the possibility of using both initial by-products as ingredients in the food industry, due to the effects associated with the high total dietary fibre content.

  18. Polymorphism of myofibrillar proteins of rabbit skeletal-muscle fibres. An electrophoretic study of single fibres.

    OpenAIRE

    Salviati, G; Betto, R; Danieli Betto, D

    1982-01-01

    Rabbit predominantly fast-twitch-fibre and predominantly slow-twitch-fibre skeletal muscles of the hind limbs, the psoas, the diaphragm and the masseter muscles were fibre-typed by one-dimensional polyacrylamide-gel electrophoresis of the myofibrillar proteins of chemically skinned single fibres. Investigation of the distribution of fast-twitch-fibre and slow-twitch-fibre isoforms of myosin light chains and the type of myosin heavy chains, based on peptide 'maps' published in Cleveland. Fisch...

  19. Development of an automated asbestos counting software based on fluorescence microscopy.

    Science.gov (United States)

    Alexandrov, Maxym; Ichida, Etsuko; Nishimura, Tomoki; Aoki, Kousuke; Ishida, Takenori; Hirota, Ryuichi; Ikeda, Takeshi; Kawasaki, Tetsuo; Kuroda, Akio

    2015-01-01

    An emerging alternative to the commonly used analytical methods for asbestos analysis is fluorescence microscopy (FM), which relies on highly specific asbestos-binding probes to distinguish asbestos from interfering non-asbestos fibers. However, all types of microscopic asbestos analysis require laborious examination of large number of fields of view and are prone to subjective errors and large variability between asbestos counts by different analysts and laboratories. A possible solution to these problems is automated counting of asbestos fibers by image analysis software, which would lower the cost and increase the reliability of asbestos testing. This study seeks to develop a fiber recognition and counting software for FM-based asbestos analysis. We discuss the main features of the developed software and the results of its testing. Software testing showed good correlation between automated and manual counts for the samples with medium and high fiber concentrations. At low fiber concentrations, the automated counts were less accurate, leading us to implement correction mode for automated counts. While the full automation of asbestos analysis would require further improvements in accuracy of fiber identification, the developed software could already assist professional asbestos analysts and record detailed fiber dimensions for the use in epidemiological research.

  20. Practical Hydrogen Loading of Air Silica Fibres

    DEFF Research Database (Denmark)

    Sørensen, Henrik Rokkjær; Jensen, Jesper Bevensee; Jensen, Jesper Bo Damm

    2005-01-01

    A method for hydrogen-loading air-silica optical fibres has been developed allowing out-diffusion times comparable to standard step-index fibres. Examples of the first grating written in Ge-doped air-silica fibres using a 266nm UV-laser are shown.......A method for hydrogen-loading air-silica optical fibres has been developed allowing out-diffusion times comparable to standard step-index fibres. Examples of the first grating written in Ge-doped air-silica fibres using a 266nm UV-laser are shown....

  1. Electromagnetic mixed-waste processing system for asbestos decontamination

    International Nuclear Information System (INIS)

    1995-04-01

    The first phase of a program to develop and demonstrate a cost-effective, integrated process for remediation of asbestos-containing material that is contaminated with organics, heavy metals, and radioactive compounds was successfully completed. Laboratory scale tests were performed to demonstrate initial process viability for asbestos conversion, organics removal, and radionuclide and heavy metal removal. All success criteria for the laboratory tests were met. (1) Ohio DSI demonstrated greater than 99% asbestos conversion to amorphous solids using their commercial process. (2) KAI demonstrated 90% removal of organics from the asbestos suspension. (3) Westinghouse STC achieved the required metals removal criteria on a laboratory scale (e.g., 92% removal of uranium from solution, resin loadings of 0.6 equivalents per liter, and greater than 50% regeneration of resin in a batch test.) Using the information gained in the laboratory tests, the process was reconfigured to provide the basis for the mixed waste remediation system. An integrated process is conceptually developed, and a Phase 2 program plan is proposed to provide the bench-scale development needed in order to refine the design basis for a pilot processing system

  2. ASBESTOS PIPE-INSULATION REMOVAL ROBOT SYSTEM; FINAL

    International Nuclear Information System (INIS)

    Unknown

    2000-01-01

    This final topical report details the development, experimentation and field-testing activities for a robotic asbestos pipe-insulation removal robot system developed for use within the DOE's weapon complex as part of their ER and WM program, as well as in industrial abatement. The engineering development, regulatory compliance, cost-benefit and field-trial experiences gathered through this program are summarized

  3. Evaluation of the deposition, translocation and pathological response of brake dust with and without added chrysotile in comparison to crocidolite asbestos following short-term inhalation: Interim results

    International Nuclear Information System (INIS)

    Bernstein, David M.; Rogers, Rick; Sepulveda, Rosalina; Kunzendorf, Peter; Bellmann, Bernd; Ernst, Heinrich; Phillips, James I.

    2014-01-01

    Chrysotile has been frequently used in the past in manufacturing brakes and continues to be used in brakes in many countries. This study was designed to provide an understanding of the biokinetics and potential toxicology following inhalation of brake dust following short term exposure in rats. The deposition, translocation and pathological response of brake dust derived from brake pads manufactured with chrysotile were evaluated in comparison to the amphibole, crocidolite asbestos. Rats were exposed by inhalation 6 h/day for 5 days to either brake dust obtained by sanding of brake-drums manufactured with chrysotile, a mixture of chrysotile and the brake dust or crocidolite asbestos. No significant pathological response was observed at any time point in either the brake dust or chrysotile/brake dust exposure groups. The long chrysotile fibers (> 20 μm) cleared quickly with T 1/2 estimated as 30 and 33 days, respectively in the brake dust and the chrysotile/brake dust exposure groups. In contrast, the long crocidolite fibers had a T 1/2 > 1000 days and initiated a rapid inflammatory response in the lung following exposure resulting in a 5-fold increase in fibrotic response within 91 days. These results provide support that brake dust derived from chrysotile containing brake drums would not initiate a pathological response in the lung following short term inhalation. - Highlights: • We evaluated brake dust w/wo added chrysotile in comparison to crocidolite asbestos. • Persistence, translocation, pathological response in the lung and pleural cavity. • Chrysotile cleared rapidly from the lung while the crocidolite asbestos persisted. • No significant pathology observed at any time point in the brake-dust groups. • Crocidolite produced pathological response - Wagner 4 interstitial fibrosis by 32d

  4. Process monitoring of fibre reinforced composites using optical fibre sensors

    Energy Technology Data Exchange (ETDEWEB)

    Fernando, G.F.; Degamber, B.

    2006-04-15

    The deployment of optical fibre based sensor systems for process monitoring of advanced fibre reinforced organic matrix composites is reviewed. The focus is on thermosetting resins and the various optical and spectroscopy-based techniques that can be used to monitor the processing of these materials. Following brief consideration of the manufacturing methods commonly used in the production of thermoset based composites, a discussion is presented on sensor systems that can be used to facilitate real-time chemical process monitoring. Although the focus is on thermosets, the techniques described can be adapted for chemical monitoring of organic species in general. (author)

  5. Morphological changes in textile fibres exposed to environmental stresses: atomic force microscopic examination.

    Science.gov (United States)

    Canetta, Elisabetta; Montiel, Kimberley; Adya, Ashok K

    2009-10-30

    The ability of the atomic force microscope (AFM) to investigate the nanoscopic morphological changes in the surfaces of fabrics was examined for the first time. This study focussed on two natural (cotton and wool), and a regenerated cellulose (viscose) textile fibres exposed to various environmental stresses for different lengths of times. Analyses of the AFM images allowed us to measure quantitatively the surface texture parameters of the environmentally stressed fabrics as a function of the exposure time. It was also possible to visualise at the nanoscale the finest details of the surfaces of three weathered fabrics and clearly distinguish between the detrimental effects of the imposed environmental conditions. This study confirmed that the AFM could become a very powerful tool in forensic examination of textile fibres to provide significant fibre evidence due to its capability of distinguishing between different environmental exposures or forced damages to fibres.

  6. Carbon fibre material for tomorrow

    International Nuclear Information System (INIS)

    Kartini Noorsal; Mohd Ariff Baharom

    2010-01-01

    As science and technology continue to cross boundaries of known practices, materials and manufacturing techniques and into the frontiers of new materials, environment and applications, the opportunities for research in materials in general will inevitably increase. The unique properties of carbon fibre which combines low weight and high stiffness, makes it in ever greater demand as substitutes for traditional materials. This is due to the rising costs of raw materials and energy and the necessity to reduce carbon dioxide emission. The carbon fibres produced are particularly of high standard in terms of quality and processing characteristics especially when it is designed in structural components in the aerospace and defence industries. This results in a well structured organisation in producing the fibre starting from its raw material to the final composite products. In achieving this effort, research and communication of the progress takes a fundamental role. (author)

  7. LHCb Upgrade: Scintillating Fibre Tracker

    International Nuclear Information System (INIS)

    Tobin, Mark

    2016-01-01

    The LHCb detector will be upgraded during the Long Shutdown 2 (LS2) of the LHC in order to cope with higher instantaneous luminosities and to read out the data at 40 MHz using a trigger-less read-out system. All front-end electronics will be replaced and several sub-detectors must be redesigned to cope with higher occupancy. The current tracking detectors downstream of the LHCb dipole magnet will be replaced by the Scintillating Fibre (SciFi) Tracker. The SciFi Tracker will use scintillating fibres read out by Silicon Photomultipliers (SiPMs). State-of-the-art multi-channel SiPM arrays are being developed to read out the fibres and a custom ASIC will be used to digitise the signals from the SiPMs. The evolution of the design since the Technical Design Report in 2014 and the latest R & D results are presented.

  8. EFFECTS OF POLYTHENE FIBRES ON SELECTED PROPERTIES ...

    African Journals Online (AJOL)

    eobe

    ABSTRACT. The aim of this study is to explore the possibility of using polythene fibres to increase the strength of sandcrete ... Polythene fibres were got from shredded sachet water bags. .... degradable waste is more of a problem than the bio-.

  9. A review of the cohorts with environmental and occupational mineral fiber exposure.

    Science.gov (United States)

    Metintas, Selma; Ak, Guntulu; Metintas, Muzaffer

    2018-04-20

    The aim of the study was to examine factors associated with Malignant Mesothelioma (MM) incidence rate of the groups with occupational asbestos and environmental asbestos or erionite exposure in rural area. In this ecological study, a total of 21 cohort datasets (8 environmental and 13 occupational) were evaluated. Data were analyzed using a multiple linear regression analysis model. In environmental cohorts, the risk of MM incidence was higher in women and people exposed to erionite. In this cohort, the incidence rate of MM increased as the median exposure time increased, while the incidence decreased as the median cumulative exposure dose increased. In occupational cohorts, the incidence rate of MM was positively correlated with the median cumulative exposure dose. The risk of mesothelioma was lower in those exposed to tremolite than others. Environmental asbestos exposure is as important as occupational exposure to develop MM, and it has its own unique exposure features on the risk of MM.

  10. Fibre Optic Communication Key Devices

    CERN Document Server

    Grote, Norbert

    2012-01-01

    The book gives an in-depth description of the key devices of current and next generation fibre optic communication networks. In particular, the book covers devices such as semiconductor lasers, optical amplifiers, modulators, wavelength filters, and detectors but the relevant properties of optical fibres as well. The presentations include the physical principles underlying the various devices, the technologies used for the realization of the different devices, typical performance characteristics and limitations, and development trends towards more advanced components are also illustrated. Thus the scope of the book spans relevant principles, state-of-the-art implementations, the status of current research and expected future components.

  11. Photonic crystal fibres and effective index approaches

    DEFF Research Database (Denmark)

    Riishede, Jesper; Libori, Stig E. Barkou; Bjarklev, Anders Overgaard

    2001-01-01

    Photonic crystal fibres are investigated with an effective index approach. The effective index of both core and cladding is found to be wavelength dependent. Accurate modelling must respect the rich topology of these fibres.......Photonic crystal fibres are investigated with an effective index approach. The effective index of both core and cladding is found to be wavelength dependent. Accurate modelling must respect the rich topology of these fibres....

  12. Fibre optic networks for safeguards applications

    International Nuclear Information System (INIS)

    Smith, B.G.R.; Chare, P.; Barrier, A.

    1991-01-01

    The Euratom Safeguards Directorate has recently installed a fibre optic network in a new large scale nuclear facility in the European Communities. The selection, installation and commissioning of the fibre optic network is discussed from the viewpoint of network topology, physical testing, trouble shooting and authentication. The future use of fibre optic networks for safeguards applications is discussed

  13. Continuous jute fibre reinforced laminated paper composite

    Indian Academy of Sciences (India)

    Jute fibre; laminated paper composite; plastic bag pollution. Abstract. Plastic bags create a serious environmental problem. The proposed jute fibre reinforced laminated paper composite and reinforcement-fibre free paper laminate may help to combat the war against this pollutant to certain extent. The paper laminate ...

  14. Stress concentrations in an impregnated fibre bundle with random fibre packing

    OpenAIRE

    Swolfs, Y.; Gorbatikh, L.; Romanov, V.; Orlova, S.; Lomov, S. V.; Verpoest, I.

    2013-01-01

    The stress redistribution after a single fibre break is a fundamental issue in longitudinal strength models for unidirectional composites. Current models assume hexagonal or square fibre packings. In the present work, random fibre packings were modelled using 3D finite element analysis and compared to ordered fibre packings. Significant differences in the stress redistribution are found. Compared to square and hexagonal packings, random fibre packings result in smaller stress concentration fa...

  15. Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure

    DEFF Research Database (Denmark)

    Hänninen, Tuomas; Thygesen, Anders; Mehmood, Shahid

    2012-01-01

    Currently, separation processes used for natural fibres for composite reinforcing textiles cause a significant amount of damage to the fibres. Microscopic analysis showed that industrially processed flax (Linum usitassimium L.) fibres contained significantly more defects than green or retted ones...... to heterogeneous reactivity. Analogous findings were observed in hemp (Cannabis sativa L.) fibre damaged in the laboratory under controlled conditions, emphasising the need to develop extraction and separation processes that minimise mechanical damage to the fibres....

  16. Flow diagnostics using fibre optics

    Indian Academy of Sciences (India)

    hypersonic vehicle with a 2-component fibre-optic strain-gauge balance. ... ment suffers a fall in accuracy to uncomfortable levels (more than 5%) and the measurement .... 15 kW motor with an associated thyristor speed-control system.

  17. Nonlinear microstructured polymer optical fibres

    DEFF Research Database (Denmark)

    Frosz, Michael Henoch

    is potentially the case for microstructured polymer optical fibres (mPOFs). Another advantage is that polymer materials have a higher biocompatibility than silica, meaning that it is easier to bond certain types of biosensor materials to a polymer surface than to silica. As with silica PCFs, it is difficult...

  18. Connections on discrete fibre bundles

    International Nuclear Information System (INIS)

    Manton, N.S.; Cambridge Univ.

    1987-01-01

    A new approach to gauge fields on a discrete space-time is proposed, in which the fundamental object is a discrete version of a principal fibre bundle. If the bundle is twisted, the gauge fields are topologically non-trivial automatically. (orig.)

  19. Cool application for Optical Fibres

    CERN Multimedia

    2001-01-01

    In a new first for CERN, optical fibres have been put on test to measure very low temperatures. If these tests prove successful, this new technology could lead to important cost-saving changes in the way the temperatures of superconducting magnets are measured. There was excitement in the air last March when the team led by Walter Scandale and Luc Thévenaz tested very low temperature measurement using optical fibres. This spring in CERN's Cryogenics lab an idea was put to the test as a new kind of low-temperature thermometry using optical fibres was tested down to 2 Kelvin (around 300 degrees below room temperature), and the first results are looking good. Optical fibres are well known for their ability to carry large amounts of data around the world, but it is less well known that they can be used for measuring temperatures. The intuition that they might be able to measure very low temperatures - such as those of the LHC magnets - came to the attention of CERN's Walter Scandale at the Optical Fi...

  20. Novel functional view of the crocidolite asbestos-treated A549 human lung epithelial transcriptome reveals an intricate network of pathways with opposing functions

    Directory of Open Access Journals (Sweden)

    Stevens John R

    2008-08-01

    Full Text Available Abstract Background Although exposure to asbestos is now regulated, patients continue to be diagnosed with mesothelioma, asbestosis, fibrosis and lung carcinoma because of the long latent period between exposure and clinical disease. Asbestosis is observed in approximately 200,000 patients annually and asbestos-related deaths are estimated at 4,000 annually1. Although advances have been made using single gene/gene product or pathway studies, the complexity of the response to asbestos and the many unanswered questions suggested the need for a systems biology approach. The objective of this study was to generate a comprehensive view of the transcriptional changes induced by crocidolite asbestos in A549 human lung epithelial cells. Results A statistically robust, comprehensive data set documenting the crocidolite-induced changes in the A549 transcriptome was collected. A systems biology approach involving global observations from gene ontological analyses coupled with functional network analyses was used to explore the effects of crocidolite in the context of known molecular interactions. The analyses uniquely document a transcriptome with function-based networks in cell death, cancer, cell cycle, cellular growth, proliferation, and gene expression. These functional modules show signs of a complex interplay between signaling pathways consisting of both novel and previously described asbestos-related genes/gene products. These networks allowed for the identification of novel, putative crocidolite-related genes, leading to several new hypotheses regarding genes that are important for the asbestos response. The global analysis revealed a transcriptome that bears signatures of both apoptosis/cell death and cell survival/proliferation. Conclusion Our analyses demonstrate the power of combining a statistically robust, comprehensive dataset and a functional network genomics approach to 1 identify and explore relationships between genes of known importance

  1. Laser–fibre vibrometry at 1550 nm

    International Nuclear Information System (INIS)

    Waz, A T; Kaczmarek, P R; Abramski, K M

    2009-01-01

    This paper presents new solutions for laser vibrometry, which are based on fibre vibrometry in the third telecommunication window. The scattered laser beam from a vibrating object is guided by a fibre collimator and coherently detected through heterodyning it with an acousto-optical frequency-shifted reference beam. The concept of measuring vibration parameters from many points of the vibrating object has been inspired by wavelength division multiplexing (WDM) in fibre telecommunications. The N-independent WDM separated 15XX nm fibre-coupled laser diodes (used for optical fibre telecommunications) form a system of sources for multipoint vibration measurement according to the rule 'one wavelength–one point'

  2. Fibre optic cable in the nuclear industry

    International Nuclear Information System (INIS)

    Roberts, Berwyn

    1987-01-01

    The uses of optical fibre cables to transmit light signals include medical applications and telecommunications. In the nuclear industry the applications include process control and monitoring, conventional datacoms, security fencing and sensors. Time division multiplexing is described and currently available fibre optic multipexers are listed and explained. Single and multimode fibres are mentioned. Fibre optics are also used in cryogenics, to monitor the integrity of the storage vessels for cryogenic liquids. The uses of fibre optics at Hartlepool, Heysham I and Torness are mentioned in particular. (UK)

  3. Influence of calcium carbonate on the decomposition of asbestos contained in end-of-life products

    International Nuclear Information System (INIS)

    Belardi, G.; Piga, L.

    2013-01-01

    Highlights: • We characterized end-of-life asbestos-containing materials. • In the range 620–680 °C, calcite and quartz affect decomposition of asbestos. • Hypothesized decomposition reactions match with solid phases revealed by XRD analysis. • TGA of the content of chrysotile gives good results both in air and in nitrogen. - Abstract: Three bearing-asbestos wastes, friction material, vinyl-asbestos (linoleum) and cement-asbestos mainly containing chrysotile were characterized. Powder X-ray diffraction (XRDP), scanning electron microscopy (SEM) with microanalysis observations and thermal analysis (TGA/DTA) were carried out on the materials as received and after heating at 1100 °C in order to observe their structural changes and thermal behaviours. A quantitative determination of chrysotile in the friction material was also carried out. To study the influence of CaCO 3 on the decomposition of asbestos, the three techniques were also applied on the linoleum and cement-asbestos at room temperature and at 1100 °C after leaching of the materials with 1:3 HCl to remove the carbonates present in the wastes. The results show that the presence of CaCO 3 prevents the asbestos to decompose according to the known decomposition reactions and leads to the formation of calcium-silicate compounds. When CaCO 3 is removed by washing with HCl, decomposition of asbestos proceeds according to the expected reactions

  4. Lung Function Profiles among Individuals with Nonmalignant Asbestos-related Disorders

    Directory of Open Access Journals (Sweden)

    Eun-Kee Park

    2014-12-01

    Conclusion: Lung function measurement differs in individuals with different ARDs. Monitoring of lung function among asbestos-exposed populations is a simple means of facilitating earlier interventions.

  5. Technology Demonstration of Wet Abrasive Blasting for Removal of Lead- and Asbestos-Containing Paint

    National Research Council Canada - National Science Library

    Race, Timothy

    2003-01-01

    ...). This technology demonstration showed that wet blasting using an engineered abrasive can safely and effectively remove lead- and asbestos-containing paint from exterior concrete masonry unit walls...

  6. Influence of calcium carbonate on the decomposition of asbestos contained in end-of-life products

    Energy Technology Data Exchange (ETDEWEB)

    Belardi, G. [Environmental Geology and GeoEngineering Institute (CNR), Area della ricerca RM1, via Salaria km 29,300, 00016 Monterotondo (Rome) (Italy); Piga, L., E-mail: luigi.piga@uniroma1.it [Department of Chemical Engineering, Materials and Environment, Sapienza University of Rome, via Eudossiana 84, 00184 Rome (Italy)

    2013-12-10

    Highlights: • We characterized end-of-life asbestos-containing materials. • In the range 620–680 °C, calcite and quartz affect decomposition of asbestos. • Hypothesized decomposition reactions match with solid phases revealed by XRD analysis. • TGA of the content of chrysotile gives good results both in air and in nitrogen. - Abstract: Three bearing-asbestos wastes, friction material, vinyl-asbestos (linoleum) and cement-asbestos mainly containing chrysotile were characterized. Powder X-ray diffraction (XRDP), scanning electron microscopy (SEM) with microanalysis observations and thermal analysis (TGA/DTA) were carried out on the materials as received and after heating at 1100 °C in order to observe their structural changes and thermal behaviours. A quantitative determination of chrysotile in the friction material was also carried out. To study the influence of CaCO{sub 3} on the decomposition of asbestos, the three techniques were also applied on the linoleum and cement-asbestos at room temperature and at 1100 °C after leaching of the materials with 1:3 HCl to remove the carbonates present in the wastes. The results show that the presence of CaCO{sub 3} prevents the asbestos to decompose according to the known decomposition reactions and leads to the formation of calcium-silicate compounds. When CaCO{sub 3} is removed by washing with HCl, decomposition of asbestos proceeds according to the expected reactions.

  7. Fast Flux Test Facility Asbestos Location Tracking Program

    International Nuclear Information System (INIS)

    REYNOLDS, J.A.

    1999-01-01

    Procedure Number HNF-PRO-408, revision 0, paragraph 1.0, ''Purpose,'' and paragraph 2.0, ''Requirements for Facility Management of Asbestos,'' relate building inspection and requirements for documentation of existing asbestos-containing building material (ACBM) per each building assessment. This documentation shall be available to all personnel (including contractor personnel) entering the facility at their request. Corrective action was required by 400 Area Integrated Annual Appraisal/Audit for Fiscal Year 1992 (IAA-92-0007) to provide this notification documentation. No formal method had been developed to communicate the location and nature of ACBM to maintenance personnel in the Fast Flux Test Facility (FFTF) 400 Area. The scope of this Data Package Document is to locate and evaluate any ACBM found at FFTF which constitutes a baseline. This includes all buildings within the protected area. These findings are compiled from earlier reports, numerous work packages and engineering evaluations of employee findings

  8. Electromagnetic mixed waste processing system for asbestos decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Kasevich, R.S. [KAI Technologies, Inc., Portsmouth, NH (United States); Vaux, W.G. [Westinghouse Electric Corp., Pittsburgh, PA (United States); Nocito, T. [Ohio DSI Corp., New York (United States)

    1995-10-01

    DOE sites contain a broad spectrum of asbestos materials (cloth, pipe lagging, sprayed insulation and other substances) which are contaminated with a combination of hazardous and radioactive wastes due to its use during the development of the U.S. nuclear weapons complex. These wastes consist of cutting oils, lubricants, solvents, PCB`s, heavy metals and radioactive contaminants. The radioactive contaminants are the activation, decay and fission products of DOE operations. The asbestos must be converted by removing and separating the hazardous and radioactive materials to prevent the formation of mixed wastes and to allow for both sanitary disposal and effective decontamination. Currently, no technology exists that can meet these sanitary and other objectives.

  9. Malignant mesothelioma following radiation exposure

    International Nuclear Information System (INIS)

    Antman, K.H.; Corson, J.M.; Li, F.P.; Greenberger, J.; Sytkowski, A.; Henson, D.E.; Weinstein, L.

    1983-01-01

    Mesothelioma developed in proximity to the field of therapeutic radiation administered 10-31 years previously in four patients. In three, mesothelioma arose within the site of prior therapeutic radiation for another cancer. Mesothelioma in the fourth patient developed adjacent to the site of cosmetic radiation to a thyroidectomy scar. None of these four patients recalled an asbestos exposure or had evidence of asbestosis on chest roentgenogram. Lung tissue in one patient was negative for ferruginous bodies, a finding considered to indicate no significant asbestos exposure. Five other patients with radiation-associated mesothelioma have been reported previously, suggesting that radiation is an uncommon cause of human mesothelioma. Problems in the diagnosis of radiation-associated mesotheliomas are considered

  10. Plant fibre composites - porosity and volumetric interaction

    DEFF Research Database (Denmark)

    Madsen, Bo; Thygesen, Anders; Lilholt, Hans

    2007-01-01

    the combination of a high fibre volume fraction, a low porosity and a high composite density is optimal. Experimental data from the literature on volumetric composition and density of four types of plant fibre composites are used to validate the model. It is demonstrated that the model provides a concept......Plant fibre composites contain typically a relative large amount of porosity, which considerably influences properties and performance of the composites. The large porosity must be integrated in the conversion of weight fractions into volume fractions of the fibre and matrix parts. A model...... is presented to predict the porosity as a function of the fibre weight fractions, and to calculate the related fibre and matrix volume fractions, as well as the density of the composite. The model predicts two cases of composite volumetric interaction separated by a transition fibre weight fraction, at which...

  11. Optical fibre laser velocimetry: a review

    International Nuclear Information System (INIS)

    Charrett, Thomas O H; James, Stephen W; Tatam, Ralph P

    2012-01-01

    The applications of optical fibre technology to laser velocimetry are diverse and often critical to their successful implementation, particularly in harsh environments. Applications range from the use of optical fibres for beam delivery and scattered light collection, aiding the miniaturization of instrument probes, to the use of imaging fibre bundles for imaging the flow field in planar velocimetry systems. Optical fibre techniques have also been used in signal processing, for example fibre frequency shifters, and optical fibre devices such as amplifiers and lasers have been exploited. This paper will review the use of optical fibres in point-wise laser velocimetry techniques such as laser Doppler velocimetry and laser transit anemometry, as well as in planar measurement techniques such as particle imaging velocimetry and planar Doppler velocimetry. (topical review)

  12. BOA II: pipe-asbestos insulation removal system

    International Nuclear Information System (INIS)

    Schempf, H.; Mutschler; Boehmke, S.; Chemel, B.; Piepgras, C.

    1996-01-01

    BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to high labor costs and high level of radioactive contamination, making manual removal costly and inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  13. Nuclear dismantling and asbestos elimination: the same challenge?

    International Nuclear Information System (INIS)

    Dadoumont, J.; Deboodt, P.

    1998-01-01

    The ALARA principle constitutes a powerful tool for workers dosimetry management in the nuclear field. A consequence of the application of this principle could be an accentuation of the nuclear risk face to the industrial risk. Using works of asbestos elimination in nuclear medium, the present article examines how a generalization of the utilization of the ALARA principle is conceivable and how the existing obstacles could be removed. (N.C.)

  14. Confidence Intervals for Asbestos Fiber Counts: Approximate Negative Binomial Distribution.

    Science.gov (United States)

    Bartley, David; Slaven, James; Harper, Martin

    2017-03-01

    The negative binomial distribution is adopted for analyzing asbestos fiber counts so as to account for both the sampling errors in capturing only a finite number of fibers and the inevitable human variation in identifying and counting sampled fibers. A simple approximation to this distribution is developed for the derivation of quantiles and approximate confidence limits. The success of the approximation depends critically on the use of Stirling's expansion to sufficient order, on exact normalization of the approximating distribution, on reasonable perturbation of quantities from the normal distribution, and on accurately approximating sums by inverse-trapezoidal integration. Accuracy of the approximation developed is checked through simulation and also by comparison to traditional approximate confidence intervals in the specific case that the negative binomial distribution approaches the Poisson distribution. The resulting statistics are shown to relate directly to early research into the accuracy of asbestos sampling and analysis. Uncertainty in estimating mean asbestos fiber concentrations given only a single count is derived. Decision limits (limits of detection) and detection limits are considered for controlling false-positive and false-negative detection assertions and are compared to traditional limits computed assuming normal distributions. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2017.

  15. Chest HRCT signs predict deaths in long-term follow-up among asbestos exposed workers

    Energy Technology Data Exchange (ETDEWEB)

    Vehmas, Tapio, E-mail: tapio.vehmas@ttl.fi [Health and Work Ability, Finnish Institute of Occupational Health, Topeliuksenkatu 41 a A, FI-00250 Helsinki (Finland); Oksa, Panu, E-mail: panu.oksa@ttl.fi [Health and Work Ability, Finnish Institute of Occupational Health, Uimalankatu 1, FI-33101 Tampere (Finland)

    2014-10-15

    Highlights: • Much lung and pleural pathology is found in chest CT studies. • HRCT signs were screened and subsequent mortality followed up. • Several signs were related to all-cause and disease specific deaths. • The HRCT classification system used was able to predict mortality. • Secondary preventive strategies should be developed for patients with such signs. - Abstract: Objectives: To study associations between chest HRCT signs and subsequent deaths in long-term follow-up. Methods: Lung and pleural signs of 633 asbestos exposed workers (age 45–86, mean 65) screened with HRCT were recorded by using the International Classification of Occupational and Environmental Respiratory Diseases (ICOERD) system, which contains detailed instructions for use and reference images. Subsequent mortality was checked from the national register. Cox regression adjusted for covariates (age, sex, BMI, asbestos exposure, pack-years) was used to explore the relations between HRCT signs and all-cause deaths, cardiovascular and benign respiratory deaths, and deaths from neoplasms – all according to the ICD-10 diagnostic system. Results: The follow-up totalled 5271.9 person-years (mean 8.3 y/person, range .04–10.3). 119 deaths were reported. Irregular/linear opacities, honeycombing, emphysema, large opacities, visceral pleural abnormalities and bronchial wall thickening were all significantly related to all-cause deaths. Most of these signs were associated also with deaths from neoplasms and benign respiratory disease. Deaths from cardiovascular disease were predicted by emphysema and visceral pleural abnormalities. Conclusions: Several HRCT signs predicted deaths. Careful attention should be paid on subjects with radiological signs predictive of deaths and new secondary preventive strategies developed. This calls for further focused studies among different populations.

  16. DEMOLISHING A COLD-WAR-ERA FULE-STORAGE BASIN SUPERSTRUCTURE LADEN WITH ASBESTOS

    International Nuclear Information System (INIS)

    LLOYD, E.R.; STEVENS, J.M.; DAGAN, E.B.; ORGILL, T.K.; GREEN, M.A.; LARSON, C.H.; ZINSLI, L.C.

    2009-01-01

    The K East (KE) Basin facilities are located near the north end of the Hanford Site's 100 K area. The facilities were built in 1950 as part of the KE Reactor complex and constructed within 400 meters of the Columbia River, which is the largest river in the Pacific Northwest and by volume the fourth largest river in the United States. The basin, located adjacent to the reactor, was used for the underwater storage of irradiated nuclear fuel discharged from the reactor. The basin was covered by a superstructure comprising steel columns and beams, concrete, and cement asbestos board (CAB) siding. The project's mission was to complete demolition of the structure over the KE Basin within six months of turnover from facility deactivation activities. The demolition project team applied open-air demolition techniques to bring the facility to slab-on-grade. Several innovative techniques were used to control contamination and maintain contamination control within the confines of the demolition exclusion zone. The techniques, which focused on a defense-in-depth approach, included spraying fixatives on interior and exterior surfaces before demolition began; applying fixatives during the demolition; misting using a fine spray of water during demolition; and demolishing the facility systematically. Another innovative approach that made demolition easier was to demolish the building with the non-friable CAB remaining in place. The CAB siding covered the exterior of the building and portions of the interior walls, and was an integral part of the multiple-layered roof. The project evaluated the risks involved in removing the CAB material in a radiologically contaminated environment and determined that radiological dose rates and exposure to radiological contamination and industrial hazards would be significantly reduced by using heavy equipment to remove the CAB during demolition. The ability to perform this demolition safely and without spreading contamination (radiological or

  17. Diagnostic Performance of Ultra-Low-Dose Computed Tomography for Detecting Asbestos-Related Pleuropulmonary Diseases: Prospective Study in a Screening Setting.

    Science.gov (United States)

    Schaal, Marysa; Severac, François; Labani, Aissam; Jeung, Mi-Young; Roy, Catherine; Ohana, Mickaël

    2016-01-01

    To evaluate the diagnostic performance of Ultra-Low-Dose Chest CT (ULD CT) for the detection of any asbestos-related lesions (primary endpoint) and specific asbestos-related abnormalities, i.e. non-calcified and calcified pleural plaques, diffuse pleural thickening, asbestosis and significant lung nodules (secondary endpoints). 55 male patients (55.7±8.1 years old) with occupational asbestos exposure for at least 15 years and where CT screening was indicated were prospectively included. They all underwent a standard unenhanced chest CT (120kV, automated tube current modulation), considered as the reference, and an ULD CT (135kV, 10mA), both with iterative reconstruction. Two chest radiologists independently and blindly read the examinations, following a detailed protocol. Sensitivity, specificity, positive predictive value, negative predictive value, accuracy and error rate of ULD CT were calculated using the exact method of Pearson with a confidence interval of 95%. Radiation dose was 17.9±1.2mGy.cm (0.25mSv) for the ULD-CT versus 288.8 ±151mGy.cm (4mSv); p value = 100%, negative predictive value = 97.8%), high for lung nodules, diffuse pleural thickening and calcified pleural plaques (sensitivity, specificity, PPV and NPV = 100%) and fair for asbestosis (sensitivity = 75%, specificity = 100%, PPV = 00%, NPV = 98.1%). Intra-reader accuracy between the ULD CT and the reference CT for the primary endpoint was 98% for the senior and 100% for the junior radiologist. Inter-reader agreement for the primary endpoint was almost perfect (Cohen's Kappa of 0.81). ULD CT in the screening of asbestos exposure related diseases has 90.9% sensitivity and 100% specificity, and could therefore be proposed as a first line examination.

  18. A simple evaluation of numbers of asbestos bodies in bronchoalveolar lavage fluid under light microscopy. Analysis of 35 pulmonary nodular lesions

    International Nuclear Information System (INIS)

    Kawahara, Kunimitsu; Kawasumi, Hiromi; Nagano, Teruaki; Sasada, Shinji; Okamoto, Norio

    2008-01-01

    More than 1 asbestos body (AB) per ml of bronchoalveolar lavage fluid (BALF) under light microscopy was defined as AB positive (ABP) and suggests an occupational asbestos exposure. We microscopically evaluated the AB number per one ml of BALF, which we defined as the AB concentration (ABC), using bronchoalveolar lavage (BAL) cytocentrifuge slides obtained from 35 patients having pulmonary nodular lesions (20 carcinoma and 15 nonneoplastic disease) and examined the correlation between ABC and clinicopathological data including findings on Helical computed tomography scan (HCTS) and occupational history of asbestos exposure (OHAE). BAL was performed by the standard technique without removing mucous with a gauze filter. AB was microscopically defined as a structure consisting of a core of transparent asbestos surrounded by an iron-protein coat. Twenty of 35 patients were ABP (ABP rate; 57%) and ABC ranged from 0 to 207.98/ml (mean ABC; 11.33/ml). Mean ABC was significantly higher in patients with OHAE (15.04/ml) compared to that in patients without OHAE (3.23/ml). Twenty-two of 35 patients (63%) lacked abnormality on HCTS and among these, 12 patients (55%) were ABP. In 20 pulmonary carcinoma patients, the ABP rate was 85% and ABC ranged from 0 to 31.1/ml (Mean ABC; 2.99/ml). The ABP rate of pulmonary carcinoma patients was 40% (8 patients) and among these, 5 patients (63%) did not show any abnormality on HCTS. In conclusion, our method was simple and useful and should be applied to patients with pulmonary nodular lesions and OHAE, even if there are no abnormalities on HCTS. (author)

  19. Early recognition of lung cancer in workers occupationally exposed to asbestos; Frueherkennung von Lungenkrebs bei asbestexponierten Arbeitnehmern

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann-Preiss, K. [BDT MVZ Erlangen, Erlangen (Germany); Rehbock, B. [Praxis fuer Diagnostische Radiologie mit pneumologischem Schwerpunkt, Berlin (Germany)

    2016-09-15

    Despite the fact that working with asbestos and placing it on the market have been banned in Germany since 1993 according to the Ordinance on Hazardous Substances, asbestos-related diseases of the lungs and pleura are still the leading cause of death in occupational diseases. The maximum industrial usage of asbestos was reached in former West Germany in the late 1970s and in former East Germany the late 1980s. Occupational diseases, mainly mesotheliomas and lung cancer emerging now are thus caused by asbestos exposure which occurred 30-40 years earlier. It is known that the combination of smoking and asbestos exposure results in a superadditive increase in the risk to develop lung cancer. No suitable screening methods for early detection of malignant mesothelioma are currently available and the therapeutic options are still very limited; however, the national lung screening trial (NLST) has shown for the first time that by employing low-dose computed tomography (LDCT) in heavy smokers, lung cancer mortality can be significantly reduced. According to current knowledge the resulting survival benefits far outweigh the potential risks involved in the diagnostic work-up of suspicious lesions. These results in association with the recommendations of international medical societies and organizations were pivotal as the German statutory accident insurance (DGUV) decided to provide LDCT as a special occupational medical examination for workers previously exposed to asbestos and with a particularly high risk for developing lung cancer. (orig.) [German] Asbestbedingte Erkrankungen von Lunge und Pleura sind in Deutschland noch immer die haeufigsten zum Tode fuehrenden Berufskrankheiten, obwohl die Verarbeitung und das Inverkehrbringen von Asbest gemaess der Gefahrstoffverordnung seit 1993 verboten sind. Das Maximum des Rohasbestverbrauchs in den alten Bundeslaendern war Ende der 70er, in den neuen Bundeslaendern Ende der 80er Jahre erreicht. Heute neu diagnostizierte

  20. Corrosion resistance of steel fibre reinforced concrete – a literature review

    DEFF Research Database (Denmark)

    Marcos Meson, Victor; Michel, Alexander; Solgaard, Anders

    2016-01-01

    Steel fibre reinforced concrete (SFRC) is increasingly being used in the construction of prefabricated segmental linings for bored tunnels, since it entails simplified production processes and higher quality standards. However, international standards and guidelines are not consistent regarding...... the consideration of steel fibres for the structural verification of SFRC elements exposed to corrosive environments, hampering the development of civil infrastructure built of SFRC. In particular, the long-term effect of exposure to chlorides is in focus and under discussion. This paper reviews the existing...... the existence of a critical crack width, below 0.20 mm, where corrosion of carbon-steel fibres is not critical and the structural integrity of the exposed SFRC can be ensured over the long-term. A doctoral project investigating chloride-induced corrosion of steel fibres on cracked SFRC has been initiated...

  1. SYN-JEM : A Quantitative Job-Exposure Matrix for Five Lung Carcinogens

    NARCIS (Netherlands)

    Peters, Susan; Vermeulen, Roel; Portengen, L??tzen; Olsson, Ann; Kendzia, Benjamin; Vincent, Raymond; Savary, Barbara; LavouCrossed Sign, Jcrossed D Signr??me; Cavallo, Domenico; Cattaneo, Andrea; Mirabelli, Dario; Plato, Nils; Fevotte, Joelle; Pesch, Beate; Br??ning, Thomas; Straif, Kurt; Kromhout, Hans

    2016-01-01

    OBJECTIVE The use of measurement data in occupational exposure assessment allows more quantitative analyses of possible exposure-response relations. We describe a quantitative exposure assessment approach for five lung carcinogens (i.e. asbestos, chromium-VI, nickel, polycyclic aromatic hydrocarbons

  2. SYN-JEM : A Quantitative Job-Exposure Matrix for Five Lung Carcinogens

    NARCIS (Netherlands)

    Peters, Susan; Vermeulen, Roel; Portengen, Lützen; Olsson, Ann C.; Kendzia, Benjamin; Vincent, Raymond; Savary, Barbara; LavouCrossed Sign, Jcrossed D.Signrôme; Cavallo, Domenico; Cattaneo, Andrea; Mirabelli, Dario; Plato, Nils; Fevotte, Joelle; Pesch, Beate; Brüning, Thomas; Straif, Kurt; Kromhout, Hans

    2016-01-01

    Objective: The use of measurement data in occupational exposure assessment allows more quantitative analyses of possible exposure-response relations. We describe a quantitative exposure assessment approach for five lung carcinogens (i.e. asbestos, chromium-VI, nickel, polycyclic aromatic

  3. Fundamentals of fibre-reinforced soil engineering

    CERN Document Server

    Shukla, Sanjay Kumar

    2017-01-01

    This book is intended to serve as a one-stop reference on fibre-reinforced soils. Over the past 30-35 years, the engineering behaviour of randomly distributed/oriented fibre-reinforced soil, also called simply fibre-reinforced soil, has been investigated in detail by researchers and engineers worldwide. Waste fibres (plastic waste fibres, old tyre fibres, etc.) create disposal and environmental problems. Utilization of such fibres in construction can help resolve these concerns. Research studies and some field applications have shown that the fibres can be utilized in large quantities in geotechnical and civil engineering applications in a cost-effective and environmentally friendly manner. This book covers a complete description of fibres, their effects when included within a soil or other similar materials such as the fly ash, and their field applications. It gives a detailed view of fibre-reinforced soil engineering. The book will be useful to students, professional, and researchers alike, and can also ser...

  4. Fibre optic communication key devices

    CERN Document Server

    Grote, Norbert

    2017-01-01

    The book gives an in-depth description of key devices of current and next generation fibre optic communication networks. Devices treated include semiconductor lasers, optical amplifiers, modulators, wavelength filters and other passives, detectors, all-optical switches, but relevant properties of optical fibres and network aspects are included as well. The presentations include the physical principles underlying the various devices, technologies used for their realization, typical performance characteristics and limitations, but development trends towards more advanced components are also illustrated. This new edition of a successful book was expanded and updated extensively. The new edition covers among others lasers for optical communication, optical switches, hybrid integration, monolithic integration and silicon photonics. The main focus is on Indium phosphide-based structures but silicon photonics is included as well. The book covers relevant principles, state-of-the-art implementations, status of curren...

  5. CCD technology beyond fibre optics

    International Nuclear Information System (INIS)

    Tuffen, J.

    1988-01-01

    For the past 25 years the accepted method of viewing inside industrial components, or indeed the human body, has been by the use of either flexible or rigid fibre optics. In the last five years however, many developments have enabled television cameras to reduce to a size small enough to allow internal viewing of an object, without prior dismantling. This concept was achieved five years ago, with the Welch Allyn Videoprobe 2000, a charge coupled device. (author)

  6. A discrete fibre dispersion method for excluding fibres under compression in the modelling of fibrous tissues.

    Science.gov (United States)

    Li, Kewei; Ogden, Ray W; Holzapfel, Gerhard A

    2018-01-01

    Recently, micro-sphere-based methods derived from the angular integration approach have been used for excluding fibres under compression in the modelling of soft biological tissues. However, recent studies have revealed that many of the widely used numerical integration schemes over the unit sphere are inaccurate for large deformation problems even without excluding fibres under compression. Thus, in this study, we propose a discrete fibre dispersion model based on a systematic method for discretizing a unit hemisphere into a finite number of elementary areas, such as spherical triangles. Over each elementary area, we define a representative fibre direction and a discrete fibre density. Then, the strain energy of all the fibres distributed over each elementary area is approximated based on the deformation of the representative fibre direction weighted by the corresponding discrete fibre density. A summation of fibre contributions over all elementary areas then yields the resultant fibre strain energy. This treatment allows us to exclude fibres under compression in a discrete manner by evaluating the tension-compression status of the representative fibre directions only. We have implemented this model in a finite-element programme and illustrate it with three representative examples, including simple tension and simple shear of a unit cube, and non-homogeneous uniaxial extension of a rectangular strip. The results of all three examples are consistent and accurate compared with the previously developed continuous fibre dispersion model, and that is achieved with a substantial reduction of computational cost. © 2018 The Author(s).

  7. 41 CFR 102-75.335 - Where asbestos is identified, what information must the disposal agency incorporate into the...

    Science.gov (United States)

    2010-07-01

    ... the property offered for sale contains asbestos-containing materials. Unprotected or unregulated...) and the U.S. Environmental Protection Agency (EPA) regulate asbestos because of the potential hazards... increases the risk of asbestos-related diseases, which include certain cancers and which can result in...

  8. Fatigue Damage Evolution in Fibre Composites for Wind Turbine Blades

    DEFF Research Database (Denmark)

    Jespersen, Kristine Munk

    on the micro-scale in the non-crimp fabric based composites used for wind turbine blades. The results show that fibre fractures in the unidirectional (UD) load carrying fibre bundles initiate from off-axis cracks in the thin supporting backing fibre bundles. With an increasing number of fatigue load cycles......, the UD fibre fractures progress gradually into the thickness direction of the UD fibre bundles, which eventually results in final fracture of the fibre composite. It is also found that the UD fibre fracture regions generally grow larger and initiate earlier at cross-over regions of the backing fibre...... bundles than at single backing fibre bundle regions. Furthermore, UD Fibre fractures are only observed to initiate at locations where the backing fibre bundles are ‘in contact’ with a UD fibre bundle. By observing the damage progression in 3D, it is also clear that the UD fibre fractures initiated...

  9. Development of high temperature resistant ceramic matrix composites based on SiC- and novel SiBNC-fibres

    International Nuclear Information System (INIS)

    Daenicke, Enrico

    2014-01-01

    Novel ceramic fibres in the quaternary system Si-B-C-N exhibit excellent high temperature stability and creep resistance. In th is work it was investigated, to what extent these outstanding properties of SiBNC-fibres can be transferred into ceramic matrix composites (CMC) in comparison to commercial silicon carbide (SiC) fibres. For the CMC development the liquid silicon infiltration (LSI) as well as the polymer infiltration and pyrolysis process (PIP) was applied. Extensive correlations between fibre properties, fibre coating (without, pyrolytic carbon, lanthanum phosphate), process parameters of the CMC manufacturing method and the mechanical and microstructural properties of the CMC before and after exposure to air could be established. Hence, the potential of novel CMCs can be assessed and application fields can be derived.

  10. Factors That Improve the Impact Responses of Ukam Plant Fibre ...

    African Journals Online (AJOL)

    Natural fibres around us have mechanical properties capable of making them compete effectively with synthetic fibres in the development of fibre reinforced composites. Synthetic fibres (such as glass fibres) and resins (such as polyester resin) have long been used in the development of structural components for car bodies, ...

  11. AIRBORNE ASBESTOS CONCENTRATIONS DURING BUFFING, BURNISHING, AND STRIPPING OF RESILIENT FLOOR TILE

    Science.gov (United States)

    The study was conducted to evaluate airborne asbestos concentrations during low-speed spray-buffing, ultra high-speed burnishing, and wet-stripping of asbestos-containing resilient floor tile under pre-existing and prepared levels of floor care maintenance. Low-speed spray-buffin...

  12. Determinants influencing the amount of asbestos-cement roofing in Poland

    Directory of Open Access Journals (Sweden)

    Wilk Ewa

    2015-09-01

    Full Text Available Because of its harmfulness to human health, asbestos has been banned in 55 countries, including the EU. In Poland, the use and production of asbestos and asbestos-containing products has been forbidden since 1997. However, there is no precise data about the amount of asbestos-containing products to be eliminated from the territory of Poland. This survey aims to identify characteristics that have a significant impact on the estimation of asbestos-containing products used in Poland. Statistical correlation between the results of the physical inventory count done in 155 municipalities was examined. As a result of the survey it was found that the amount of asbestos-cement roofing depends on the following factors: the number of individual farms in the village, the distance from the asbestos manufacturing plants, the age of the buildings and the economic situation of municipality. The results obtained may contribute to the ability to predict the amount of asbestos-containing products used in other municipalities.

  13. Development of the KOSHA Proficiency Testing Scheme on Asbestos Analysis in Korea

    Directory of Open Access Journals (Sweden)

    Jiwoon Kwon

    2017-09-01

    Full Text Available This commentary presents the regulatory backgrounds and development of the national proficiency testing (PT scheme on asbestos analysis in the Republic of Korea. Since 2009, under the amended Occupational Safety and Health Act, the survey of asbestos in buildings and clearance test of asbestos removal works have been mandated to be carried out by the laboratories designated by the Ministry of Employment and Labor (MOEL in the Republic of Korea. To assess the performance of asbestos laboratories, a PT scheme on asbestos analysis was launched by the Korea Occupational Safety and Health Agency (KOSHA on behalf of the MOEL in 2007. Participating laboratories are evaluated once a year for fiber counting and bulk asbestos analysis by phase contrast microscopy and polarized light microscopy, respectively. Currently, the number of laboratory enrollments is > 200, and the percentage of passed laboratories is > 90. The current status and several significant changes in operation, sample preparations, and statistics of assigning the reference values of the KOSHA PT scheme on asbestos analysis are presented. Critical retrospect based on the experiences of operating the KOSHA PT scheme suggests considerations for developing a new national PT scheme for asbestos analysis.

  14. Asbestos-related radiographic findings among household contacts of workers exposed to Libby vermiculite: impact of workers' personal hygiene practices.

    Science.gov (United States)

    Hilbert, Timothy J; Franzblau, Alfred; Dunning, Kari K; Borton, Eric K; Rohs, Amy M; Lockey, James E

    2013-11-01

    To explore the potential impact of worker hygiene by determining the prevalence of radiographic changes consistent with asbestos exposure among household contacts of workers exposed to Libby vermiculite that contained amphibole fibers. Workers and household contacts had chest radiographs and completed questionnaires regarding hygiene and potential exposure pathways. Participants included 191 household contacts of 118 workers. One household contact (0.5%) had localized pleural thickening, and three (1.6%) had irregular opacities at profusion category 1/0 or greater. Worker radiographs demonstrated pleural changes in 45% and irregular opacities at profusion category 1/0 or greater in 8%. Libby vermiculite-exposed workers demonstrated an elevated prevalence of pleural and interstitial chest radiographic changes. There was, however, no increased prevalence of similar changes among household contacts, likely because of personal hygiene measures taken by the majority of workers.

  15. Health hazards from fine asbestos dusts. An analysis of 70,656 occupational preventive medical investigations from 1973 to the end of 1986.

    Science.gov (United States)

    Raithel, H J; Weltle, D; Bohlig, H; Valentin, H

    1989-01-01

    For the period from 1973 to the end of 1986, 70,656 data sets on occupational preventive medical examinations in employees exposed occupationally to asbestos dust (G 1.2) were made available to us by the Central Registry for Employees Exposed to Asbestos Dust (ZAS). On the basis of this data, an analysis of asbestosis risk was to be made in relation to specific areas of work, taking into consideration the beginning and duration of exposure. Proceedings for declaratory appraisal in accordance with occupational disease no. 4103 were instituted in 1760 cases in the report period. In accordance with the character of the available data, the X-ray findings in the lungs were available from the persons investigated as parameters of possible asbestosis risk on the basis of coding consistent with the International Pneumoconiosis Classification (ILO U/C 1971 and/or ILO 1980 West Germany). The major result of the statistical analyses on the mainframe macrocomputer of the University of Erlangen-Nuremberg was that the relatively highest risk of asbestosis was present in persons whose exposure began before 1955. On the other hand, with increasing duration of exposure, an unequivocal rise of the asbestosis risk could not be detected on the basis of the overall population. In relation to the individual fields of work, the relatively highest risk of asbestosis was shown to be in the asbestos textile and paper industry, as well as in the asbestos cement industry. No detectable risk of asbestosis was present in the fields of mining, traffic and health service and for women in the industrial sectors of building material, gas and water, catering trade, building, commerce as well as banking and insurance. Accordingly, it can be assumed that certain fields of work are or were exposed to such a small extent or not at all that a risk of asbestosis which is relevant in terms of occupational medicine is no longer to be assumed or was not to be assumed. This applies above all to certain work

  16. Dietary fibre in foods: a review.

    Science.gov (United States)

    Dhingra, Devinder; Michael, Mona; Rajput, Hradesh; Patil, R T

    2012-06-01

    Dietary fibre is that part of plant material in the diet which is resistant to enzymatic digestion which includes cellulose, noncellulosic polysaccharides such as hemicellulose, pectic substances, gums, mucilages and a non-carbohydrate component lignin. The diets rich in fibre such as cereals, nuts, fruits and vegetables have a positive effect on health since their consumption has been related to decreased incidence of several diseases. Dietary fibre can be used in various functional foods like bakery, drinks, beverages and meat products. Influence of different processing treatments (like extrusion-cooking, canning, grinding, boiling, frying) alters the physico- chemical properties of dietary fibre and improves their functionality. Dietary fibre can be determined by different methods, mainly by: enzymic gravimetric and enzymic-chemical methods. This paper presents the recent developments in the extraction, applications and functions of dietary fibre in different food products.

  17. Frost resistance of fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place

    1999-01-01

    Frost resistance of fibre reinforced concrete with 2.5-4.2% air and 6-9% air (% by volume in fresh concrete) casted in the laboratory and in-situ is compared. Steel fibres with hooked ends (ZP, length 30 mm) and polypropylene fibres (PP, CS, length 12 mm) are applied. It is shown that· addition...... of 0.4-1% by volume of fibres cannot replace air entrainment in order to secure a frost resistant concrete; the minimum amount of air needed to make the concrete frost resistant is not changed when adding fibres· the amount of air entrainment must be increased when fibres are added to establish...

  18. Theorem of comparative sensitivity of fibre sensors

    Science.gov (United States)

    Belovolov, M. I.; Paramonov, V. M.; Belovolov, M. M.

    2017-12-01

    We report an analysis of sensitivity of fibre sensors of physical quantities based on different types of interferometers. We formulate and prove the following theorem: under the time-dependent external physical perturbations at nonzero frequencies (i.e., except the static and low-frequency ones) on the sensitive arms of an interferometer in the form of multiturn elements (coils), there exist such lengths L of the measuring arms of the fibre interferometers at which the sensitivity of sensors based on the Sagnac fibre interferometers can be comparable with the sensitivity of sensors based on Michelson, Mach - Zehnder, or Fabry - Perot fibre interferometers, as well as exceed it under similar other conditions (similar-type perturbations, similar arm lengths and single-mode fibre types). The consequences that follow from the theorem, important for practical implementation of arrays of fibre sensors for measurement purposes and the devices with stable metrological properties, are discussed.

  19. Hollow Core Photonic Crystal Fibre Comprising a Fibre Grating in the Cladding and its Applications

    DEFF Research Database (Denmark)

    2010-01-01

    An optical fibre is provided having a fibre cladding around a longitudinally extending optical propagation core. The cladding has a reflection region of a varying refractive index in the longitudinal direction....

  20. Asbestos fiber release from the brake pads of overhead industrial cranes.

    Science.gov (United States)

    Spencer, J W; Plisko, M J; Balzer, J L

    1999-06-01

    The purpose of this evaluation was to determine the actual contribution of airborne asbestos fibers to the work environment from the operation of overhead cranes and hoists that use asbestos composition brake pads. The evaluation was conducted in a working manufacturing facility. Other potential sources of asbestos were accounted for by visual inspection and background air monitoring. An overhead crane assembly comprised of a trolley and two hoists was employed for this study. The crane was operated for two consecutive eight-hour shifts representative of a heavy-duty cycle. Forty-four personal and area air samples were collected during the assessment. Asbestos fibers were analyzed for by phase contrast (NIOSH 7400), and transmission electron (NIOSH 7402) microscopy methods. Eight-hour time-weighted average (TWA) asbestos fiber concentrations ranged from cranes.

  1. Dietary fibre in foods: a review

    OpenAIRE

    Dhingra, Devinder; Michael, Mona; Rajput, Hradesh; Patil, R. T.

    2011-01-01

    Dietary fibre is that part of plant material in the diet which is resistant to enzymatic digestion which includes cellulose, noncellulosic polysaccharides such as hemicellulose, pectic substances, gums, mucilages and a non-carbohydrate component lignin. The diets rich in fibre such as cereals, nuts, fruits and vegetables have a positive effect on health since their consumption has been related to decreased incidence of several diseases. Dietary fibre can be used in various functional foods li...

  2. Influence of fibre orientation on the performance of steel fibre-reinforced concrete

    OpenAIRE

    Grünewald, Steffen; Laranjeira de Oliveira, Filipe; Walraven, Joost; Aguado de Cea, Antonio; Molins i Borrell, Climent

    2012-01-01

    The performance of fibre-reinforced materials in the hardened state depends on the material behaviour, the production method and influences related to the structure. The position and the orientation of fibres in a structure can differ from the homogenous distribution and the random orientation in a mixer. Due to the flow of the concrete, fibres are able to orient which makes the prediction of the structural behaviour of fibre-reinforced concrete more complex, but it also offers the potential ...

  3. OPTICAL FIBRES AND FIBREOPTIC SENSORS: Polarisation reflectometry of anisotropic optical fibres

    Science.gov (United States)

    Konstantinov, Yurii A.; Kryukov, Igor'I.; Pervadchuk, Vladimir P.; Toroshin, Andrei Yu

    2009-11-01

    Anisotropic, polarisation-maintaining fibres have been studied using a reflectometer and integrated optic polariser. Linearly polarised pulses were launched into the fibre under test at different angles between their plane of polarisation and the main optical axis of the fibre. A special procedure for the correlation analysis of these reflectograms is developed to enhance the reliability of the information about the longitudinal optical uniformity ofanisotropic fibres.

  4. Fibre optic power meter calibration uncertainties

    CSIR Research Space (South Africa)

    Nel, M

    2010-06-01

    Full Text Available the patch cord, alternatively feeding into the standard or UUT is labelled ‘reference patch cord’. It is preferred to use a patch cord with a ceramic fibre tip (not metal fibre tip) to reduce reflections between the fibre tip and the detector... tightening effect To empirically quantify the effect of connector tightening, two readings are taken at each measurement, which for briefness are labelled "tight" and "un-tight". A "tight" connection is when the fibre connector is tightened...

  5. Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites

    Directory of Open Access Journals (Sweden)

    2007-11-01

    Full Text Available Abaca fibre reinforced PP composites were fabricated with different fibre loadings (20, 30, 40, 50wt% and in some cases 35 and 45 wt%. Flax and jute fibre reinforced PP composites were also fabricated with 30 wt% fibre loading. The mechanical properties, odour emission and structure properties were investigated for those composites. Tensile, flexural and Charpy impact strengths were found to increase for fibre loadings up to 40 wt% and then decreased. Falling weight impact tests were also carried out and the same tendency was observed. Owing to the addition of coupling agent (maleated polypropylene -MAH-PP, the tensile, flexural and falling weight impact properties were found to increase in between 30 to 80% for different fibre loadings. When comparing jute and flax fibre composites with abaca fibre composites, jute fibre composites provided best tensile properties but abaca fibre polypropylene composites were shown to provide best notch Charpy and falling weight impact properties. Odours released by flax fibre composites were smaller than jute and abaca fibre composites.

  6. A validation of the fibre orientation and fibre length attrition prediction for long fibre-reinforced thermoplastics

    Science.gov (United States)

    Hopmann, Ch.; Weber, M.; van Haag, J.; Schöngart, M.

    2015-05-01

    To improve the mechanical performance of polymeric parts, fibre reinforcement has established in industrial applications during the last decades. Next to the widely used Short Fibre-reinforced Thermoplastics (SFT) the use of Long Fibre-reinforced Thermoplastics (LFT) is increasingly growing. Especially for non-polar polymeric matrices like polypropylene (PP), longer fibres can significantly improve the mechanical performance. As with every kind of discontinuous fibre reinforcement the fibre orientations (FO) show a high impact on the mechanical properties. On the contrary to SFT where the local fibre length distribution (FLD) can be often neglected, for LFT the FLD show a high impact on the material's properties and has to be taken into account in equal measure to the FOD. Recently numerical models are available in commercial filling simulation software and allow predicting both the local FOD and FLD in LFT parts. The aim of this paper is to compare i.) the FOD results and ii) the FLD results from available orientation- and fibre length attrition-models to those obtained from experimental data. The investigations are conducted by the use of different injection moulded specimens made from long glass fibre reinforced PP. In order to determine the FOD, selected part sections are examined by means of Computed Tomographic (CT) analyses. The fully three dimensional measurement of the FOD is then performed by digital image processing using grey scale correlation. The FLD results are also obtained by using digital image processing after a thermal pyrolytic separation of the polymeric matrix from the fibres. Further the FOD and the FLD are predicted by using a reduced strain closure (RSC) as well as an anisotropic rotary diffusion - reduced strain closure model (ARD-RSC) and Phelps-Tucker fibre length attrition model implemented in the commercial filling software Moldflow, Autodesk Inc., San Rafael, CA, USA.

  7. A validation of the fibre orientation and fibre length attrition prediction for long fibre-reinforced thermoplastics

    International Nuclear Information System (INIS)

    Hopmann, Ch.; Weber, M.; Haag, J. van; Schöngart, M.

    2015-01-01

    To improve the mechanical performance of polymeric parts, fibre reinforcement has established in industrial applications during the last decades. Next to the widely used Short Fibre-reinforced Thermoplastics (SFT) the use of Long Fibre-reinforced Thermoplastics (LFT) is increasingly growing. Especially for non-polar polymeric matrices like polypropylene (PP), longer fibres can significantly improve the mechanical performance. As with every kind of discontinuous fibre reinforcement the fibre orientations (FO) show a high impact on the mechanical properties. On the contrary to SFT where the local fibre length distribution (FLD) can be often neglected, for LFT the FLD show a high impact on the material’s properties and has to be taken into account in equal measure to the FOD. Recently numerical models are available in commercial filling simulation software and allow predicting both the local FOD and FLD in LFT parts. The aim of this paper is to compare i.) the FOD results and ii) the FLD results from available orientation- and fibre length attrition-models to those obtained from experimental data. The investigations are conducted by the use of different injection moulded specimens made from long glass fibre reinforced PP. In order to determine the FOD, selected part sections are examined by means of Computed Tomographic (CT) analyses. The fully three dimensional measurement of the FOD is then performed by digital image processing using grey scale correlation. The FLD results are also obtained by using digital image processing after a thermal pyrolytic separation of the polymeric matrix from the fibres. Further the FOD and the FLD are predicted by using a reduced strain closure (RSC) as well as an anisotropic rotary diffusion - reduced strain closure model (ARD-RSC) and Phelps-Tucker fibre length attrition model implemented in the commercial filling software Moldflow, Autodesk Inc., San Rafael, CA, USA

  8. A validation of the fibre orientation and fibre length attrition prediction for long fibre-reinforced thermoplastics

    Energy Technology Data Exchange (ETDEWEB)

    Hopmann, Ch.; Weber, M.; Haag, J. van; Schöngart, M. [Institute of Plastics Processing (IKV) at RWTH Aachen University, Pontstr. 49, 52062 Aachen (Germany)

    2015-05-22

    To improve the mechanical performance of polymeric parts, fibre reinforcement has established in industrial applications during the last decades. Next to the widely used Short Fibre-reinforced Thermoplastics (SFT) the use of Long Fibre-reinforced Thermoplastics (LFT) is increasingly growing. Especially for non-polar polymeric matrices like polypropylene (PP), longer fibres can significantly improve the mechanical performance. As with every kind of discontinuous fibre reinforcement the fibre orientations (FO) show a high impact on the mechanical properties. On the contrary to SFT where the local fibre length distribution (FLD) can be often neglected, for LFT the FLD show a high impact on the material’s properties and has to be taken into account in equal measure to the FOD. Recently numerical models are available in commercial filling simulation software and allow predicting both the local FOD and FLD in LFT parts. The aim of this paper is to compare i.) the FOD results and ii) the FLD results from available orientation- and fibre length attrition-models to those obtained from experimental data. The investigations are conducted by the use of different injection moulded specimens made from long glass fibre reinforced PP. In order to determine the FOD, selected part sections are examined by means of Computed Tomographic (CT) analyses. The fully three dimensional measurement of the FOD is then performed by digital image processing using grey scale correlation. The FLD results are also obtained by using digital image processing after a thermal pyrolytic separation of the polymeric matrix from the fibres. Further the FOD and the FLD are predicted by using a reduced strain closure (RSC) as well as an anisotropic rotary diffusion - reduced strain closure model (ARD-RSC) and Phelps-Tucker fibre length attrition model implemented in the commercial filling software Moldflow, Autodesk Inc., San Rafael, CA, USA.

  9. Non-Linear Fibres for Widely Tunable Femtosecond Fibre Lasers

    DEFF Research Database (Denmark)

    Pedersen, Martin Erland Vestergaard

    and numerically. For the intermodal four-wave mixing experiment an alternative version of the Generalised Non-Linear Schrödinger Equation is derived, which includes the correct dispersion of the transverse field. It is observed that the alternative version of the Generalised Non-Linear Schrödinger Equation......, as opposed to the commonly used version, is able to reproduce the intermodal four-wave mixing experiment. The relation between the intramodal self-phase modulation and the intramodal Raman effect is determined from experimental measurements on a number of step-index fibres. The Raman fraction is found...

  10. Blast Resistance of Slurry Infiltrated Fibre Concrete with Waste Steel Fibres from Tires

    Directory of Open Access Journals (Sweden)

    Drdlová Martina

    2018-01-01

    Full Text Available The utilization of waste steel fibres (coming from the recycling process of the old tires in production of blast resistant cement based panels was assessed. Waste fibres were incorporated in slurry infiltrated fibre concrete (SIFCON, which is a special type of ultra-highperformance fibre reinforced concrete with high fibre content. The technological feasibility (i.e. suitability of the waste fibres for SIFCON technology was assessed using homogeneity test. Test specimens were prepared with three volume fractions (5; 7.5 and 10 % by vol. of waste unclassified fibres. SIFCON with industrial steel fibres (10% by vol. and ultra-highperformance fibre concrete with industrial fibres were also cast and tested for comparison purposes. Quasi-static mechanical properties were determined. Real blast tests were performed on the slab specimens (500x500x40 mm according to the modified methodology M-T0-VTU0 10/09. Damage of the slab, the change of the ultrasound wave velocity propagation in the slab specimen before and after the blast load in certain measurement points, the weight of fragments and their damage potential were evaluated and compared. Realized tests confirmed the possibility of using the waste fibres for SIFCON technology. The obtained results indicate, that the usage of waste fibres does not significantly reduce the values of SIFCON flexural and compressive strength at quasi-static load - the values were comparable to the specimens with industrially produced fibres. With increasing fibre content, the mechanical parameters are increasing as well. Using of the waste fibres reduces fragmentation of SIFCON at blast load due to the fibre size parameters. Using of low diameter fibres means more fibres in the matrix and thus better homogeneity of the whole composite with less unreinforced areas. Regarding the blast tests, the specimen with waste steel fibres showed the best resistance and outperformed also the specimen with commercial fibres. Using of

  11. On the threshold conditions for electron beam damage of asbestos amosite fibers in the transmission electron microscope (TEM).

    Science.gov (United States)

    Martin, Joannie; Beauparlant, Martin; Sauvé, Sébastien; L'Espérance, Gilles

    2016-12-01

    Asbestos amosite fibers were investigated to evaluate the damage caused by a transmission electron microscope (TEM) electron beam. Since elemental x-ray intensity ratios obtained by energy dispersive x-ray spectroscopy (EDS) are commonly used for asbestos identification, the impact of beam damage on these ratios was evaluated. It was determined that the magnesium/silicon ratio best represented the damage caused to the fiber. Various tests showed that most fibers have a current density threshold above which the chemical composition of the fiber is modified. The value of this threshold current density varied depending on the fiber, regardless of fiber diameter, and in some cases could not be determined. The existence of a threshold electron dose was also demonstrated. This value was dependent on the current density used and can be increased by providing a recovery period between exposures to the electron beam. This study also established that the electron beam current is directly related to the damage rate above a current density of 165 A/cm 2 . The large number of different results obtained suggest, that in order to ensure that the amosite fibers are not damaged, analysis should be conducted below a current density of 100 A/cm 2 .

  12. BOA: Asbestos pipe insulation removal robot system. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    Schempf, H.; Bares, J.E.

    1995-02-01

    The project described in this report targets the development of a mechanized system for safe, cost-efficient and automated abatement of asbestos containing materials used as pipe insulation. Based on several key design criteria and site visits, a proof-of-concept prototype robot system, dubbed BOA, was designed and built, which automatically strips the lagging and insulation from the pipes, and encapsulates them under complete vacuum operation. The system can operate on straight runs of piping in horizontal or vertical orientations. Currently we are limited to four-inch diameter piping without obstacles as well as a somewhat laborious emplacement and removal procedure -- restrictions to be alleviated through continued development. BOA removed asbestos at a rate of 4-5 ft./h compared to 3 ft./h for manual removal of asbestos with a 3-person crew. The containment and vacuum system on BOA was able to achieve the regulatory requirement for airborne fiber emissions of 0.01 fibers/ccm/ 8-hr. shift. This program consists of two phases. The first phase was completed and a demonstration was given to a review panel, consisting of DOE headquarters and site representatives as well as commercial abatement industry representatives. Based on the technical and programmatic recommendations drafted, presented and discussed during the review meeting, a new plan for the Phase II effort of this project was developed. Phase 11 will consist of a 26-month effort, with an up-front 4-month site-, market-, cost/benefit and regulatory study before the next BOA robot (14 months) is built, and then deployed and demonstrated (3 months) at a DOE site (such as Fernald or Oak Ridge) by the beginning of FY`97.

  13. Investigation on effect of fibre hybridization and orientation on ...

    Indian Academy of Sciences (India)

    2017-07-25

    Jul 25, 2017 ... for fibres to assess their efficiency. The first ... alternative to flax spun yarns. Bledzki et al ... Natural fibre composite are renewable, light in weight with ..... absorbs more energy due to hybridization of abaca and neem fibres.

  14. Surface treated polypropylene (PP) fibres for reinforced concrete

    Energy Technology Data Exchange (ETDEWEB)

    López-Buendía, Angel M., E-mail: buendia@uv.es [AIDICO Technological Institute of Construction, Benjamin Franklin 17, 46380 Paterna, Valencia (Spain); Romero-Sánchez, María Dolores [AIDICO Technological Institute of Construction, Marble Technical Unit, Camí de Castella 4, 03660 Novelda. Alicante (Spain); Climent, Verónica [Lafarge Cementos, Polígono Sepes, Isaac Newton s/n, 46500 Sagunto, Valencia (Spain); Guillem, Celia [AIDICO Technological Institute of Construction, Marble Technical Unit, Camí de Castella 4, 03660 Novelda. Alicante (Spain)

    2013-12-15

    Surface treatments on a polypropylene (PP) fibre have contributed to the improvement of fibre/concrete adhesion in fibre-reinforced concrete. The treatments to the PP fibre were characterized by contact angle measurements, ATR-IR and XPS to analyse chemical alterations. The surface topography and fibre/concrete interaction were analysed by several microscopic techniques, namely optical petrographic, and scanning electron microscopy. Treatment modified the surface chemistry and topography of the fibre by introducing sodium moieties and created additional fibre surface roughness. Modifications in the fibre surface led to an increase in the adhesion properties between the treated fibres and concrete and an improvement in the mechanical properties of the fibre-reinforced concrete composite as compared to the concrete containing untreated PP fibres. Compatibility with the concrete and increased roughness and mineral surface was also improved by nucleated portlandite and ettringite mineral association anchored on the alkaline PP fibre surface, which is induced during treatment.

  15. Control during corporate crisis: asbestos and the Manville bankruptcy.

    Science.gov (United States)

    Delaney, K J

    1991-01-01

    Chapter 11 bankruptcy provides an opportunity for addressing issues of power and control during corporate crisis. A broad notion of power is essential in understanding the complex events that led to the Chapter 11 filing of the Manville Corporation, formerly the nation's leading asbestos manufacturer. The theory of finance hegemony places this case in an entirely new light by taking into account the power of the financial community. The Manville bankruptcy illuminates several mechanisms by which this hegemony operates. From this perspective, Chapter 11 bankruptcy is viewed as a choice made from a set of options severely constrained by other powerful institutions, rather than a result of managerial incompetence or market failure.

  16. BOA: Asbestos Pipe-Insulation Abatement Robot System

    International Nuclear Information System (INIS)

    Schempf, H.

    1996-01-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  17. BOA: Pipe-asbestos insulation removal robot system

    Energy Technology Data Exchange (ETDEWEB)

    Schempf, H.; Bares, J.; Schnorr, W. [Carnegie Mellon Univ., Pittsburgh, PA (United States)

    1995-10-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee.

  18. BOA: Pipe-asbestos insulation removal robot system

    International Nuclear Information System (INIS)

    Schempf, H.; Bares, J.; Schnorr, W.

    1995-01-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  19. Non-destructive testing on aramid fibres for the long-term assessment of interventions on heritage structures

    International Nuclear Information System (INIS)

    Ceravolo, R; Pinotti, E; Surace, C; Fragonara, L Zanotti; De Marchi, A

    2015-01-01

    High strength fibre reinforced polymers (FRPs) are composite materials made of fibres such as carbon, aramid and/or glass, and a resin matrix. FRPs are commonly used for structural repair and strengthening interventions and exhibit high potential for applications to existing constructions, including heritage buildings. In regard to aramid fibres, uncertainties about the long-term behaviour of these materials have often made the designers reluctant to use them in structural engineering. The present study describes simple and non-destructive nonlinearity tests for assessing damage or degradation of structural properties in Kevlar fibres. This was obtained by using high precision measurements to detect small deviations in the dynamic response measured on fibres and ropes. The change in dynamic properties was then related to a damage produced by exposure of the sample to UV rays for a defined time period, which simulated long-term sun exposure. In order to investigate the sensitivity of such an approach to damage detection, non-linearity characterisation tests were conducted on aramid fibres in both damaged and undamaged states. With the purpose of carrying out dynamic tests on small fibre specimens, a dedicated instrumentation was designed and built in cooperation with the Metrology Laboratory of the Department of Electronics at the Politecnico di Torino. (paper)

  20. In situ ESEM study of the thermal decomposition of chrysotile asbestos in view of safe recycling of the transformation product

    International Nuclear Information System (INIS)

    Gualtieri, Alessandro F.; Gualtieri, Magdalena Lassinantti; Tonelli, Massimo

    2008-01-01

    The thermal transformation of asbestos into non-hazardous crystalline phases and their recycling is a promising solution for the 'asbestos problem'. The most common asbestos-containing industrial material produced worldwide is cement-asbestos. Knowledge of the kinetics of thermal transformation of asbestos fibers in cement-asbestos is of paramount importance for the optimization of the firing process at industrial scale. Here, environmental scanning electron microscopy (ESEM) was used for the first time to follow in situ the thermal transformation of chrysotile fibers present in cement-asbestos. It was found that the reaction kinetics of thermal transformation of chrysotile was highly slowed down in the presence of water vapor in the experimental chamber with respect to He. This was explained by chemisorbed water on the surface of the fibers which affected the dehydroxylation reaction and consequently the recrystallization into Mg-silicates. In the attempt to investigate alternative and faster firing routes for the decomposition of asbestos, a low melting glass was mixed with cement-asbestos and studied in situ to assess to which extent the decomposition of asbestos is favored. It was found that the addition of a low melting glass to cement-asbestos greatly improved the decomposition reaction and decreased the transformation temperatures

  1. EXPERIMENTAL STUDY ON LIGHT TRANSMITTING CONCRETE BY USING OPTICAL FIBRE

    OpenAIRE

    S. Suganya; S. Minu Gopika

    2017-01-01

    Light transmitting concrete is one of the fibre reinforced concrete which is mainly used for aesthetic application by incorporating the optical fibres in concrete. Optical fibres help to transmit the light through the fibres and the end-light type of fibre is used to increase the aesthetic appearance of the concrete which is like a transparent concrete. Fibres are arranged in different layers, to increase the load carrying capacity and also the pattern can be created to make the concrete deco...

  2. Scintillating fibre tracking neutron detector

    International Nuclear Information System (INIS)

    Karlsson, Joakim.

    1995-04-01

    A detector for measurements of collimated fluxes of neutrons in the energy range 2-20 MeV is proposed. It utilizes (n.p) elastic scattering in scintillating optical fibres placed in successive orthogonal layers perpendicular to the neutron flux. A test module has been designed, constructed and tested with respect to separation of neutron and gamma events. The pulse height measurements show the feasibility to discriminate between neutron, gamma and background events. Application to measurements of fusion neutrons is considered. 18 refs, 22 figs, 4 tabs

  3. Reliability, Durability and Packaging of Fibre Bragg Gratings for Large-Scale Structural Health Monitoring of Defence Platforms

    Science.gov (United States)

    2013-08-01

    thermoset system designed to achieve good wetting , high-strength and low-creep adhesion. Many commercially-available adhesives were sourced and...Bragg grating: 1. Removal of the fibre coating. 2. Photosensitization of the fibre. 3. Exposure of the grating to UV laser light. 4. Annealing and...molecular hydrogen loading (H2 loading) in a heated pressure vessel . Photosensitisation results in a stronger refractive index contrast for a given

  4. Evaluation of the deposition, translocation and pathological response of brake dust with and without added chrysotile in comparison to crocidolite asbestos following short-term inhalation: interim results.

    Science.gov (United States)

    Bernstein, David M; Rogers, Rick; Sepulveda, Rosalina; Kunzendorf, Peter; Bellmann, Bernd; Ernst, Heinrich; Phillips, James I

    2014-04-01

    Chrysotile has been frequently used in the past in manufacturing brakes and continues to be used in brakes in many countries. This study was designed to provide an understanding of the biokinetics and potential toxicology following inhalation of brake dust following short term exposure in rats. The deposition, translocation and pathological response of brake dust derived from brake pads manufactured with chrysotile were evaluated in comparison to the amphibole, crocidolite asbestos. Rats were exposed by inhalation 6 h/day for 5 days to either brake dust obtained by sanding of brake-drums manufactured with chrysotile, a mixture of chrysotile and the brake dust or crocidolite asbestos. No significant pathological response was observed at any time point in either the brake dust or chrysotile/brake dust exposure groups. The long chrysotile fibers (>20 μm) cleared quickly with T(½) estimated as 30 and 33 days, respectively in the brake dust and the chrysotile/brake dust exposure groups. In contrast, the long crocidolite fibers had a T(½)>1000 days and initiated a rapid inflammatory response in the lung following exposure resulting in a 5-fold increase in fibrotic response within 91 days. These results provide support that brake dust derived from chrysotile containing brake drums would not initiate a pathological response in the lung following short term inhalation. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  5. Winding of fibre composites; Vikling af fiberkompositter

    Energy Technology Data Exchange (ETDEWEB)

    Lystrup, Aage

    2006-01-01

    Within the project 'Storage of hydrogen in advanced high pressure vessels' under the PSO-R AND D 2005 program one of the tasks is to describe the technology, which is used for manufacturing of fibre reinforced pressure vessels. Fibre reinforced pressure vessels for high pressures are manufactured by winding structural load bearing fibres around a mandrel or an internal liner. There are two different types of cylindrical pressure vessels: 1) Cylinders with thick metal liner, where only the cylindrical part is over wrapped with hoop windings, and 2) cylinders with a thin metal or polymer liner, where both the cylindrical part and the end domes are over wrapped with more layers with different fibre orientations (helical and hoop windings). This report describes the fundamental principles for filament winding of fibre reinforced polymer composites. After a short introduction to the advanced fibre composites, their properties and semi-raw materials used for fibre composites, the focus is on the process parameters, which have influence on the material quality of filament wound components. The report is both covering winding of fibre reinforced thermo-setting polymers as well as thermoplastic polymers, and there are references to vendors of filament winding machines, accessory equipment and computer software for design and manufacturing of filament wound components. (au)

  6. Step index fibre using laser interferometer

    Indian Academy of Sciences (India)

    2014-03-04

    Mar 4, 2014 ... We propose the following model to describe the cladded fibre placed inside a liquid wedge interferometer. For simplicity, we assume square interferometer plates of dimensions 2a,. 2b and refractive index μL. The fibre radius is rf and the core radius is rc with skin and core indices μs, μc respectively. Hence ...

  7. Fibre digestion in the hyra;r

    African Journals Online (AJOL)

    dried samples by calorimeter combustion. The fibre con- tent was determined by the method of Van Soest (1964) us- ing a Fibretec 1020 hot extraction apparatus. Two-way analysis of variance was used to test for differences between the two most important fibre digesting gut regions, the sac- culation and caeca. Results.

  8. Mohair, cashmere and other animal hair fibres

    CSIR Research Space (South Africa)

    Hunter, L

    2012-11-01

    Full Text Available Although luxury animal fibres, excluding silk, represent far less than 0.1% of global fibre production, they play a very significant role in the luxury, high value-added end of the market, notably the apparel market, being renowned for their special...

  9. Mohair, cashmere and other animal hair fibres

    CSIR Research Space (South Africa)

    Hunter, L

    2012-11-01

    Full Text Available and mostly unique features, such as comfort and softness. This chapter covers the production, properties, processing and end-uses of the various luxury animal fibres, with the exclusion of silk, with the main focus on the down (undercoat) fibres of those...

  10. Insertion of optic fibre for CMS

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    The MicroJET system uses high pressure to carefully put the optical fibres into their protective tubes. These fibres are vital for rapid data transfer, but are also very delicate and, if damanged, may not work at the required efficiency. Similiar methods are used to install cables for the telecommunications industry.

  11. Deformation quantization of principal fibre bundles

    International Nuclear Information System (INIS)

    Weiss, S.

    2007-01-01

    Deformation quantization is an algebraic but still geometrical way to define noncommutative spacetimes. In order to investigate corresponding gauge theories on such spaces, the geometrical formulation in terms of principal fibre bundles yields the appropriate framework. In this talk I will explain what should be understood by a deformation quantization of principal fibre bundles and how associated vector bundles arise in this context. (author)

  12. Microstructural characterization of stone wool fibre network

    DEFF Research Database (Denmark)

    Chapelle, Lucie; Brøndsted, Povl; Kusano, Yukihiro

    2014-01-01

    Understanding the mechanical properties of fibrous network as complex as stone wool materials requires a relevant description of their microstructure and architecture. In this study, different methods have been proposed to characterize the fibre orientation, diameter and length of fibres as well...

  13. Recent advances in poled optical fibres

    DEFF Research Database (Denmark)

    Pruneri, V.; Margulis, W.; Myrén, N.

    2005-01-01

    A second-order nonlinearity can be induced in optical fibres through poling. We describe accomplishments of the EU project GLAMOROUS in making low-cost high performance electrooptic and nonlinear optical fibre- and waveguide-based components. In particular a comparison with more traditional...

  14. Fibre optic cables for the ALICE experiment

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    These thin fibres will transmit the signal received in detectors at the ALICE experiment when it starts up with the LHC in 2008. The analogue signals produced in the detectors are first converted into digital pulse, which are transported in light down such fibres. Computers then read this digital signal to produce the final set of data.

  15. Thermally induced structural changes in Nomex fibres

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Thermally aged Nomex fibres manifest several residual effects viz. reduction in X-ray crystallinity, weight loss and deterioration in tensile characteristics. Surface damages in the form of longi- tudinal openings, holes, material deposits etc have also been observed. Based on the data from thermally exposed fibres ...

  16. Strength variability of single flax fibres

    DEFF Research Database (Denmark)

    Aslan, Mustafa; Chinga-Carrasco, G.; Sørensen, Bent F.

    2011-01-01

    (linear and nonlinear) of the fibres are found to be correlated with the amount of defects. The linear stress–strain curves tend to show a higher tensile strength, a higher Young’s modulus, and a lower strain to failure than the nonlinear curves. Finally, the fibres are found to fracture by a complex...

  17. Durability of fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Hansen, Kurt Kielsgaard

    1996-01-01

    The planned research will indicate, whether fibre reinforced concrete has better or worse durability than normal concrete. Durability specimens will be measured on cracked as well as uncracked specimens. Also the pore structure in the concrete will be characterized.Keywords: Fibre reinforced...... concrete, durability, pore structure, mechanical load...

  18. Selective filling of Photonic Crystal Fibres

    DEFF Research Database (Denmark)

    Nielsen, Kristian; Noordegraaf, Danny; Sørensen, Thorkild

    2005-01-01

    A model for calculating the time necessary for filling one or more specific holes in a photonic crystal fibre is made. This model is verified for water, and its enabling potential is illustrated by a polymer application. Selective filling of the core in an air-guide photonic crystal fibre...

  19. Caracterização mecânica de laminados cimentíceos esbeltos reforçados com fibras de sisal Mechanical characterization of cement-based thin-walled laminates reinforced with sisal fibre

    Directory of Open Access Journals (Sweden)

    Paulo R. L. Lima

    2007-12-01

    Full Text Available Com a proibição progressiva do uso de fibras de asbesto na fabricação de laminados à base de cimento, novos produtos têm sido desenvolvidos para suprir esta demanda do setor construtivo. A utilização de fibras de sisal como substituto ao asbesto, além de ser uma proposta ecológica tem grande importância socioeconômica, pois agregará valor a um produto cultivado com sucesso no semi-árido nordestino. Produziram-se, neste trabalho, placas laminadas com matriz de argamassa reforçadas com fibras longas de sisal. Ensaios de flexão em três pontos foram realizados com o objetivo de se estudar a influência da adição de fibras (3%, do número de camadas (2 e 3, da orientação das camadas (0 e 90° e da pressão de moldagem (0 e 2 MPa sobre o comportamento à flexão dos laminados. Os resultados indicam que a adição de fibras de sisal aumentou, para todos os casos estudados, a capacidade de absorver energia, a resistência à flexão pós-fissuração e a deflexão última do material. Os laminados reforçados com 3% de fibras de sisal, distribuídas em três camadas ortogonais à direção do carregamento e submetidos à pressão de moldagem de 2 MPa, apresentaram o melhor comportamento mecânico.Because of hazards to human and animal health, the use of asbestos and its products is being prohibited all around the world and academic institutions and fibre cement producers have been engaged in intensive research to find asbestos-free cement products. The application of natural fibres such as sisal to replace asbestos fibres can bring economical and ecological benefits due to their availability, low cost, low consumption of energy and suitability to the semi-arid area of the Northeast of Brazil (where not many plants can grow. In this paper, cement-based laminates reinforced with continuous sisal fibre were produced. Three point bending tests were carried out to evaluate the influence of addition of fibre (3%, number of layers of

  20. REAL-TIME IDENTIFICATION AND CHARACTERIZATION OF ASBESTOS AND CONCRETE MATERIALS WITH RADIOACTIVE CONTAMINATION

    International Nuclear Information System (INIS)

    XU, X. George; Zhang, X.C.

    2002-01-01

    Concrete and asbestos-containing materials were widely used in DOE building construction in the 1940s and 1950s. Over the years, many of these porous materials have been contaminated with radioactive sources, on and below the surface. To improve current practice in identifying hazardous materials and in characterizing radioactive contamination, an interdisciplinary team from Rensselaer has conducted research in two aspects: (1) to develop terahertz time-domain spectroscopy and imaging system that can be use