WorldWideScience

Sample records for arylindium reagents prepared

  1. Preparation and Purification of Zinc Sulphinate Reagents for Organic Synthesis

    Science.gov (United States)

    O’Hara, Fionn; Baxter, Ryan D.; O’Brien, Alexander G.; Collins, Michael R.; Dixon, Janice A.; Fujiwara, Yuta; Ishihara, Yoshihiro; Baran, Phil S.

    2014-01-01

    SUMMARY The present protocol details the synthesis of zinc bis(alkanesulphinate)s that can be used as general reagents for the formation of radical species. The zinc sulphinates described herein have been generated from the corresponding sulphonyl chlorides by treatment with zinc dust. The products may be used crude, or a simple purification procedure may be performed to minimize incorporation of water and zinc chloride. Elemental analysis has been conducted in order to confirm the purity of the zinc sulphinate reagents; reactions with caffeine have also been carried out to verify the reactivity of each batch that has been synthesized. Although the synthesis of the zinc sulphinate salts generally proceeds within 3 h, workup can take up to 24 h and purification can take up to 3 h. Following the steps in this protocol would enable the user to generate a small toolkit of zinc sulphinate reagents over the course of one week. PMID:23640168

  2. Preparation and Reactions of Amino Acid Ester Sulfones as New Remote Asymmetrical Induced Reagents

    Institute of Scientific and Technical Information of China (English)

    ZHOU,Cheng-He; BAI,Xue; LI,Tan-Qing; WU,Jun; Alfred Hassner

    2004-01-01

    @@ The development of chiral auxiliary-controlled asymmetric synthesis has been receiving increasing interest in recent yearsfi,2] Various chiral auxiliary reagents have been observed[3] and a lot of results showed that variation of the chiral auxiliary could influence asymmetric induction. Recently, it has been reported the reaction of the aminated sulfones as a remote chiral auxiliary with α,β-unsaturated carbonyl compounds.[4] Here we would like to report the preparation of amino acid ester sulfones as new remote asymmetrical induced reagents and their reactions with α,β-unsaturated esters.

  3. A novel approach for preparation of the antisera reagent for potency determination of inactivated H7N9 influenza vaccines

    OpenAIRE

    Schmeisser, Falko; Jing, Xianghong; Joshi, Manju; Vasudevan, Anupama; Soto, Jackeline; Li, Xing; Choudhary, Anil; Baichoo, Noel; Resnick, Josephine; Ye, Zhiping; McCormick, William; Weir, Jerry P.

    2016-01-01

    Background The potency of inactivated influenza vaccines is determined using a single‐radial immunodiffusion (SRID) assay and requires standardized reagents consisting of a Reference Antigen and an influenza strain‐specific antiserum. Timely availability of reagents is a critical step in influenza vaccine production, and the need for backup approaches for reagent preparation is an important component of pandemic preparedness. Objectives When novel H7N9 viruses emerged in China in 2013, candid...

  4. Cu-catalyzed trifluoromethylation of aryl iodides with trifluoromethylzinc reagent prepared in situ from trifluoromethyl iodide

    OpenAIRE

    Yuzo Nakamura; Motohiro Fujiu; Tatsuya Murase; Yoshimitsu Itoh; Hiroki Serizawa; Kohsuke Aikawa; Koichi Mikami

    2013-01-01

    The trifluoromethylation of aryl iodides catalyzed by copper(I) salt with trifluoromethylzinc reagent prepared in situ from trifluoromethyl iodide and Zn dust was accomplished. The catalytic reactions proceeded under mild reaction conditions, providing the corresponding aromatic trifluoromethylated products in moderate to high yields. The advantage of this method is that additives such as metal fluoride (MF), which are indispensable to activate silyl groups for transmetallation in the corresp...

  5. Utilization of DNA recombinant techniques for the preparation of radioimmunoassay reagents for pituitary hormones

    International Nuclear Information System (INIS)

    The complementary DNA (cDNA) of human growth hormone (hGH) and human prolactin (hPRL) have been cloned in bacteria after screening a library that was obtained starting directly from human pituitary mRNA. Recombinant hGH (rec-hGH) was also expressed and secreted in E. coli periplasmic space and subsequently purified through three different chromatographic steps. After testing its purity, potency and identity with purified hGH (pit-hGH), rec-hGH was used for the preparation of radioimmunoassay reagents. Its suitability for radioiodination and immunological equivalence to pit-hGH were confirmed, its relative immunological activity being 1.037 ± 0.063 in comparison with a well known reference preparation, NIDDK-hGH-RP-1, from the National Institute of Diabetics and Digestive and Kidney Diseases, Bethesda, MD, USA. The synthetic hPRL gene was also obtained from the same cDNA pituitary library, its identity to the published sequence coding for the human hormone being demonstrated. An expression vector is now being constructed, following a strategy similar to that already used for rec-hGH preparation, purification and testing, pursuing the same goal of radioimmunoassay reagents preparation. (author). 8 refs, 5 figs

  6. Technical Report (Final): Development of Solid State Reagents for Preparing Radiolabeled Imaging Agents

    Energy Technology Data Exchange (ETDEWEB)

    Kabalka, George W

    2011-05-20

    The goal of this research was on the development of new, rapid, and efficient synthetic methods for incorporating short-lived radionuclides into agents of use in measuring dynamic processes. The initial project period (Year 1) was focused on the preparation of stable, solid state precursors that could be used to efficiently incorporate short-lived radioisotopes into small molecules of use in biological applications (environmental, plant, and animal). The investigation included development and evaluation of new methods for preparing carbon-carbon and carbon-halogen bonds for use in constructing the substrates to be radiolabeled. The second phase (Year 2) was focused on developing isotope incorporation techniques using the stable, boronated polymeric precursors. The final phase (Year 3), was focused on the preparation of specific radiolabeled agents and evaluation of their biodistribution using micro-PET and micro-SPECT. In addition, we began the development of a new series of polymeric borane reagents based on polyethylene glycol backbones.

  7. Spectrophotometric determination of metformin in pharmaceutical preparations, serum and urine using benzoin as derivatizing reagent

    International Nuclear Information System (INIS)

    A simple and selective spectrophotometric procedure is described for the determination of Metformin based on derivatization with benzoin. The Beers law was obeyed with 2.50-12.50 meu mol L-1 at 290 nm with coefficient of determination (r2) 0.997. The experimental conditions in term of pH, reaction time and temperature, and addition of derivatizing reagent were examined. The pure metformin-benzoin derivative was prepared and characterized by FT-IR and mass spectroscopic techniques. The method was applied for the determination of metformin from pharmaceutical preparations and serum and urine of volunteers after spiking with metformin. The results were checked by standard addition method. A number of pharmaceutical additives and serum or urine matrix did not affect the determination of metformin. (author)

  8. Sulfonyl Imidazoles as Reagents for the Preparation of Sulfonates and Sulfonamides

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Several new sulfonates and sulfonamides were synthesized with sulfonyl imidazoles as reagents. These compounds were characterized by 1H NMR. The melting points of all solids synthesized were obtained on Fisher-Johns Melting Point Apparatus.

  9. Automated flow-injection method for cadmium determination with pre-concentration and reagent preparation on-line

    Directory of Open Access Journals (Sweden)

    María S. Di Nezio

    2005-02-01

    Full Text Available The spectrophotometric determination of Cd(II using a flow injection system provided with a solid-phase reactor for cadmium preconcentration and on-line reagent preparation, is described. It is based on the formation of a dithizone-Cd complex in basic medium. The calibration curve is linear between 6 and 300 µg L-1 Cd(II, with a detection limit of 5.4 µg L-1, an RSD of 3.7% (10 replicates in duplicate and a sample frequency of 11.4 h-1. The proposed method was satisfactorily applied to the determination of Cd(II in surface, well and drinking waters.

  10. Automated flow-injection method for cadmium determination with pre-concentration and reagent preparation on-line

    OpenAIRE

    María S. Di Nezio; Miriam E. Palomeque; Fernández Band, Beatriz S.

    2005-01-01

    The spectrophotometric determination of Cd(II) using a flow injection system provided with a solid-phase reactor for cadmium preconcentration and on-line reagent preparation, is described. It is based on the formation of a dithizone-Cd complex in basic medium. The calibration curve is linear between 6 and 300 µg L-1 Cd(II), with a detection limit of 5.4 µg L-1, an RSD of 3.7% (10 replicates in duplicate) and a sample frequency of 11.4 h-1. The proposed method was satisfactorily ap...

  11. Small scale extraction and purification of human prolactin for the preparation of radioimmunoassay reagents

    International Nuclear Information System (INIS)

    Purification of human prolactin from pituitaries was carried out in our laboratory to obtain a pure reagent for use in RIA. The extraction and purification procedure was adapted from the method of Mc. Lean et al., and it involves the following steps: 1. Extraction of frozen pituitaries in buffers 0.14M phosphate/citrate pH 4.0 and 0.05M ammonium acetate pH 10.0. 2. Purification by hydrophobic interaction chromatography on Phenyl-Sepharose CL-4B in the presence of acetonitrile. 3. Purification by anion exchange chromatography on DEAE-Sepharose Cl-68. The purification method is considered effective for obtaining a hPrl of the purity needed for radioassay purposes, having the advantage of rapidity and relative simplicity. (author)

  12. Preparation and evaluation of primary reagents for the radioimmunoassay of prolactin hormone as a diagnostic marker for some clinical applications

    International Nuclear Information System (INIS)

    The preparation of high technology radioimmunoassay (RIA) reagents with low cost is considered to be one of the main objectives of the present study. This may be extremely helpful in diagnosis and treatment of disorders of the anterior pituitary gland or the hypothalamus portion of the brain. The local prolactin (PRL) liquid-phase and solid-phase RIA systems were prepared for the invitro assessment of human prolactin in human serum i.e., (hyperprolactinemia, can occur as a result of pituitary adenomas and hypoprolactinemia are observed in cases of hypopituitarism).The objectives of the present work were designed to achieve: -The production of PRL polyclonal antibodies , PRL standards and radiolabeled PRL tracers. - Optimization of local radioimmunoassay methods (liquid phase - double antibody and solid phase - cellulose particles). - Validation studies of the local assay were carried out using the performance characteristics of the succeeded immunoassays. In the present study, liquid phase and solid phase RIA systems for measurement of PRL proved to be specific, sensitive, precise and accurate. This may suggest that, the liquid and solid phase RIA techniques should be suited for routine laboratory use and have been used effectively in the diagnosis and treatment of patient with pituitary dysfunctions and possible reproductive disability.

  13. Photocatalytic degradation of dye by Ag/ZnO prepared by reduction of Tollen’s reagent and the ecotoxicity of degraded products

    NARCIS (Netherlands)

    Thongrom, B; Amornpitoksuk, P; Suwanboon, S; Baltrusaitis, J.

    2014-01-01

    A heterostructure of Ag/ZnO powder was prepared by a reduction of Ag(NH3) 2 + ions in a basic solution or Tollen’s reagent. From this method, the existence of a metallic Ag coating on the ZnO surface was confirmed by transmission electron microscope and x-ray photoelectron spectroscopy. The photoca

  14. An International Standard for specifying the minimum potency of anti-D blood-grouping reagents: evaluation of a candidate preparation in an international collaborative study

    NARCIS (Netherlands)

    S.J. Thorpe; B. Fox; A.B. Heath; M. Scott; M. de Haas; S. Kochman; A. Padilla

    2006-01-01

    Background and Objectives The aim of this study was to evaluate a lyophilized monoclonal immunoglobulin M (IgM) anti-D preparation for use as an International Standard to specify a recommended minimum acceptable potency of anti-D blood-grouping reagents. Materials and Methods The candidate Internati

  15. EKOF浮选药剂在官地矿选煤厂的应用%Application of EKOF Flotation Reagents in Coal Preparation Plant of Guandi Mine

    Institute of Scientific and Technical Information of China (English)

    杨林顺

    2011-01-01

    EKOF coal preparation plant, collector, octyl alcohol consumption decreased flotation reagent is a production from Germany corporation KHD. In Guandi Mine a contrast test was conducted. Compared with domestic reagents like kerosene as as foaming agent, we found that flotation clean yield increased by 2%-8%, reagent by 0.3 kg/t -0.7kg/t with imported kerosene and EKOF flotation reagent.%EKOF浮选药剂是德国KHD公司的产品,官地矿选煤厂采用煤油与EKOF浮选进口药剂与采用煤油为捕收剂、仲辛醇为起泡剂的浮选国产药剂作试验时,浮选进口药剂比国产药剂使浮精产率提高了2%~8%,药剂耗量降低了0.3kg/t~0.7kg/t。

  16. Preparation of submicron-sized spherical particles of gold using laser-induced melting in liquids and low-toxic stabilizing reagent

    Energy Technology Data Exchange (ETDEWEB)

    Tsuji, T., E-mail: tkstsuji@riko.shimane-u.ac.jp [Interdisciplinary Graduate School of Science and Engineering, Shimane University, 1060 Nishikawatsu-Cho, Matsue (Japan); Higashi, Y.; Tsuji, M. [Interdisciplinary Graduate School of Engineering Science, Kyushu University, 6-1 Kasuga-Koen, Kasuga (Japan); Ishikawa, Y. [National Institute of Advanced Industrial Science and Technology, 1-1-1 Higashi, Tsukuba, Ibaraki (Japan); Koshizaki, N. [Interdisciplinary Graduate School of Engineering, Hokkaido University, Kita13 Nishi8, Kita-Ku, Sapporo, Hokkaido (Japan)

    2015-09-01

    Highlights: • Submicron-sized spherical particles of gold were prepared using laser irradiation for the source gold nanoparticles stabilized by NaCl. • The source gold nanoparticles agglomeration was controlled both by the NaCl concentration of and by laser irradiation. • The formation process and the laser-fluence dependence of the particle size of gold nanoparticles in NaCl solutions differs from those in citrate solutions. • We revealed that properties of ligands are significantly important to prepare submicron-sized spherical particles and to control their size. - Abstract: Laser-induced melting in liquids (LIML) was applied to prepare spherical submicron-sized particles of gold (AuSMPs) from gold nanoparticles (AuNPs) stabilized using NaCl. Because undesirable byproducts, which might be generated when organic reagents such as citrate are used as the stabilizing reagent, are not generated from NaCl by laser irradiation, AuSMPs fabricated from AuNPs stabilized by NaCl will be low toxic. The AuSMPs were obtained by laser irradiation of the source AuNPs in NaCl solutions stabilized by NaCl at the proper concentration. Similar to the preparation of AuSMPs from AuNPs stabilized by citrate, the agglomeration of the source AuNPs, which is necessary to obtain AuSMPs, was controlled both by the NaCl concentration and by laser irradiation. However, the formation process and the laser-fluence dependence of the particle size of AuSMPs differed for various NaCl solutions and citrate solutions.

  17. Preparation of submicron-sized spherical particles of gold using laser-induced melting in liquids and low-toxic stabilizing reagent

    International Nuclear Information System (INIS)

    Highlights: • Submicron-sized spherical particles of gold were prepared using laser irradiation for the source gold nanoparticles stabilized by NaCl. • The source gold nanoparticles agglomeration was controlled both by the NaCl concentration of and by laser irradiation. • The formation process and the laser-fluence dependence of the particle size of gold nanoparticles in NaCl solutions differs from those in citrate solutions. • We revealed that properties of ligands are significantly important to prepare submicron-sized spherical particles and to control their size. - Abstract: Laser-induced melting in liquids (LIML) was applied to prepare spherical submicron-sized particles of gold (AuSMPs) from gold nanoparticles (AuNPs) stabilized using NaCl. Because undesirable byproducts, which might be generated when organic reagents such as citrate are used as the stabilizing reagent, are not generated from NaCl by laser irradiation, AuSMPs fabricated from AuNPs stabilized by NaCl will be low toxic. The AuSMPs were obtained by laser irradiation of the source AuNPs in NaCl solutions stabilized by NaCl at the proper concentration. Similar to the preparation of AuSMPs from AuNPs stabilized by citrate, the agglomeration of the source AuNPs, which is necessary to obtain AuSMPs, was controlled both by the NaCl concentration and by laser irradiation. However, the formation process and the laser-fluence dependence of the particle size of AuSMPs differed for various NaCl solutions and citrate solutions

  18. Different behavior of 3-nitrotyrosine and tyrosine toward perfluorinated reagents suitable for one-step preparation of volatile derivatives

    Directory of Open Access Journals (Sweden)

    Pavlović Radmila

    2012-01-01

    Full Text Available In view to develop a gas-chromatographic (GC determination of the 3-nitrotyrosine (NY/tyrosine (Y ratio as a marker of nitro-oxidative stress, different reagents were tested with the objective of obtaining a single volatile fluorinated product for each amino acid by a one-step derivatization procedure. The heptafluorobutyric anhydride (HFBA /heptafluorobutanol (HFBOH mixture proved unsuccessful for NY and Y simultaneous analysis. The reaction with different chloroformates [isobutyl chlorofomate (iBuCF and ethyl chloroformate (EtCF] in the presence of different perfluorinated alcohols such as trifluoroethanol (TFEOH and HFBOH was investigated. Combination EtCF/fluorinated alcohols yielded derivatives of NY and Y as single peaks suitable to the GC determination of the NY/Y ratio. The different behaviour of two amino acids in the used reaction mixtures and the parameters influencing the results were discussed.

  19. Preparation of ZnO Nanoparticles and Photocatalytic H2 Production Activity from Different Sacrificial Reagent Solutions

    Institute of Scientific and Technical Information of China (English)

    Tian-you Peng; Hong-jin Lv; Peng Zeng; Xiao-hu Zhang

    2011-01-01

    ZnO nanoparticles were synthesized via a direct precipitation method followed by a heterogeneous azeotropic distillation and calcination processes,and then characterized by X-ray power diffraction,scanning electron microscopy,transmission electron microscopy,and nitrogen adsorption-desorption measurement.The effects of Pt-loading amount,calcination temperature,and sacrificial reagents on the photocatalytic H2 evolution efficiency from the present ZnO suspension were investigated.The experimental results indicate that ZnO nanoparticles calcined at 400 ℃ exhibit the best photoactivity for the H2 production in comparison with the samples calcined at 300 and 500 ℃,and the photocatalytic H2 production efficiency from a methanol solution is much higher than that from a triethanolamine solution.It can be ascribed to the oxidization of methanol also contributes to the H2 production during the photochemical reaction process.Moreover,the photocatalytic mechanism for the H2 production from the present ZnO suspension system containing methanol solution is also discussed in detail.

  20. Standardization of human thyrotropin radioimmunoassay and its application to the purification of this hormone to the preparation of the assay reagents

    International Nuclear Information System (INIS)

    The various steps that are necessary for setting up the thyrotropin radioimmunoassay are presented below. Radioiodination was carried out through the Chloramine T method and the labeled purification performed on Sephadex G-100. Purification of human thyrotropin from side fractions obtained during the purification of growth hormone was carried out in order to obtain a pure reagent for use in the radioimmunoassay. The employment of the hormone obtained was evaluated as the radioimmunoassay tracer in comparison with that prepared from the hormone received from the NIDDKD, U.S.A. The results indicated that although it was not possible to obtain a hormone with a purity degree adequate to be used as the tracer, enough experience was acquired for the isolation of thyrotropin. (author)

  1. Preparation,inentification and application of pyrenebutyric acid-silica and diphenylanthracene-silica reagent on fiber-optic chemical sensor

    Institute of Scientific and Technical Information of China (English)

    LI Xin-xia; CHEN Jian

    2003-01-01

    @@ 1 Introduction Two new fiber-optic chemical sensor based on multiple fluorescence quenching is described. The reagent phases of the sensors are stable in organic solvent. The first reagent phase was constructed by covalent bonding pyrenebutyric acid (PBA) to the surface of glass (PBA-SiO2). It was identified by IR spectrum, fluorescence spectra and TGA analysis. And it can determine Rutin in ethanol.

  2. Handling Pyrophoric Reagents

    Energy Technology Data Exchange (ETDEWEB)

    Alnajjar, Mikhail S.; Haynie, Todd O.

    2009-08-14

    Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

  3. 除铜试剂NiS的制备与表征%Preparation and Characteristic of Decoppering Reagent NiS

    Institute of Scientific and Technical Information of China (English)

    苏瑞娟

    2015-01-01

    以聚乙二醇为表面活性剂,NiSO4· 6H2O 与Na2S· 9H2O为原料在30 ℃下制备合成NiS,研究结果表明:NiS是以非晶为主的多晶,在温度t=85℃的条件下,将除铜剂NiS按其过量1.2倍加入到pH=3.5的镍电解阳极液除Fe后液中,反应2 h后,除铜深度可达到3 mg/L以下,渣中铜镍质量比大于20,制备的NiS在6 h内能保持其良好的活性,满足除铜工艺的要求,并且在除铜过程中无其它杂质离子进入溶液.%The preparation of synthetic NiS with polyethyleneglycol as surface active agent and NiSO4﹒6H2 O and Na2 S﹒9H2 O as the main raw material in the reaction temperature of 30℃was carried out.The experimental results showed that:NiS is polycrystal mainly composed of amorphous phase ,rdecoppering reagent NiS will achieve the best result when the dos-age of NiS is 1.2 times of theoretical value, the pH value is 3.5, the reaction time is 2h and the reaction temperature is 85℃.The copper concentration could be decreased below 3 mg/L in electrolyte solution and the mass ratios of copper to nickel is more than 20 in the residue after removing copper and NiS still keeps active after the aging time of 6 hours, which reached the requirements of nickel electrorefining.No harmful ions enter into the nickel anode electrolyte.

  4. A solid fuel with improved indicators of moisture resistance and combustability. [Chemical preparation of ignition reagent, which also inhibits absorption of moisture

    Energy Technology Data Exchange (ETDEWEB)

    Isetani, Y.; Kimura, K.; Nisino, A.; Sonetaka, K.; Takeuti, Y.

    1983-02-24

    To improve the combustion of solid fuel, an ignition reagent is used which contains a combustion accelerator (UG) from a group of nitrates, bichromates, perchlorates, permanganates and oxalates enclosed in water resistant microcapsules. The microcapsules are produced through dispersion of the combustion accelerator, for instance, KN03, in a solution of polyvinylacetate, benzylcellulose or nitrocellulose in an organic solvent, for instance, methylethyl ketone, and then the dispersion is mixed with n-hexane and cured for 12 hours at 0 degrees, after which the KN03 is separated, washed and dried. Since the ignition reagent prevents penetration of moisture, it may operate equally well in a moist or dry medium. The use of the combustion accelerator prevents liberation of smoke and smell during combustion of solid fuel.

  5. Preparation of Bacillus subtilis-astragalus Complex Biological Reagent%黄芪多糖-枯草芽孢杆菌合生元菌液的研制

    Institute of Scientific and Technical Information of China (English)

    文宇婷; 边连全; 杜欣; 潘树德

    2012-01-01

    研究黄芪多糖-枯草芽孢杆菌合生元菌液制备过程中,黄芪多糖的最适添加量以及合生元菌液的最适培养时间.将活化后的枯草芽孢杆菌ACCC 11025菌液以1%的接种量分别加入含黄芪多糖浓度为0,0.5,1,1.5,2,2.5,3,6,10mg· mL-1的液体培养基中,分别置37℃、120r· min-1以及32℃、120r· min-1培养箱中培养,每隔0·5h检测菌液OD值.结果表明:添加浓度为1.5mg· mL-1黄芪多糖的培养基中,枯草芽孢杆菌ACCC 11025菌液浓度达到最高,分别比对照组和10mg·L-1组提高13.8%和148.8%(p<0.05);在5.5h代时最小,为1.22h,黄芪多糖-枯草芽孢杆菌合生元黄芪多糖最适添加量为1.5mg·mL-1,最适培养时间为5.5h.%This experiment was conducted to study the preparation of Bacillus subtilis—astragalus complex biological reagent,the optimal ratio of the APS and Bacillus subtilis and the best training time. Inoculate the activated Bacillus subtilis into the liquid medium, which contained different concentrations of APS. The concentrations of APS were 0, 0.5, 1, 1.5, 2, 2.5, 3, 6, lOmg-mL"1 respectively. Then train them in the 37t, 120r-min~' incubator. Measurement was made every 0.5h at 540nm absorbance. The results showed that the number of Bacillus subtilis in the liquid medium with 1.5mg'mL"' concentration of APS was the highest, and the effect was significantly (p<0.05).The best training time was 5.5h. These results indicated that the optimum dosage of APS for Bacillus subtilis ACCC11025 is 1.5mg-mL~', and the optimum incubation time is 5.5h.

  6. Production of latex agglutination reagents for pneumococcal serotyping

    Directory of Open Access Journals (Sweden)

    Ortika Belinda D

    2013-02-01

    Full Text Available Abstract Background The current ‘gold standard’ for serotyping pneumococci is the Quellung test. This technique is laborious and requires a certain level of training to correctly perform. Commercial pneumococcal latex agglutination serotyping reagents are available, but these are expensive. In-house production of latex agglutination reagents can be a cost-effective alternative to using commercially available reagents. This paper describes a method for the production and quality control (QC of latex reagents, including problem solving recommendations, for pneumococcal serotyping. Results Here we describe a method for the production of latex agglutination reagents based on the passive adsorption of antibodies to latex particles. Sixty-five latex agglutination reagents were made using the PneuCarriage Project (PCP method, of which 35 passed QC. The other 30 reagents failed QC due to auto-agglutination (n=2, no reactivity with target serotypes (n=8 or cross-reactivity with non-target serotypes (n=20. Dilution of antisera resulted in a further 27 reagents passing QC. The remaining three reagents passed QC when prepared without centrifugation and wash steps. Protein estimates indicated that latex reagents that failed QC when prepared using the PCP method passed when made with antiserum containing ≤ 500 μg/ml of protein. Sixty-one nasopharyngeal isolates were serotyped with our in-house latex agglutination reagents, with the results showing complete concordance with the Quellung reaction. Conclusions The method described here to produce latex agglutination reagents allows simple and efficient serotyping of pneumococci and may be applicable to latex agglutination reagents for typing or identification of other microorganisms. We recommend diluting antisera or removing centrifugation and wash steps for any latex reagents that fail QC. Our latex reagents are cost-effective, technically undemanding to prepare and remain stable for long periods of

  7. [Study of profile analysis on urinary free steroids using high performance liquid chromatography with spectrophotometric scanning by photodiode array--application of Girard reagent T for sample preparation].

    Science.gov (United States)

    Toya, K

    1988-04-20

    High performance liquid chromatography (HPLC) has been useful for profile analysis of steroids. However, the conventional extraction of urinary free steroids using urine specimens has some disadvantages because of lots of interfering substances simultaneously extracted from the urine. These substances were usually detected on the chromatogram at the range of relatively short retention time within which some urinary free steroids were heavily contaminated. Therefore it seemed unsuitable for profile analysis of urinary free steroids by HPLC. In this study, we developed a relatively simple and reproducible method for removing the interfering substances by Girard reagent T. In addition, the purity of each extracted free steroids were confirmed by Photodiode Array continuous scanning system, together with 3-dimensional chromatogram as well as contour map analyzed by the attached computer. The extraction procedure was as follows: (1) 10% volume of 24-h specimens of urine included 1 microgram internal standard was charged to Sep-pack C18 cartridge. The cartridge was eluted with 20 micromilligram ethyl acetate and the eluate was evaporated. (2) 10 mg Girard reagent T dissolved in 0.5 micromilligram acetic acid and 0.5 micromilligram ethanol was added to the residue, then left at room temperature for 2 hours. During this time, ketosteroids formed by the action of Girard reagent T turned to be water-soluble hydrazone complex. (3) After the addition of 10 micromilligram cold water, it was adjusted to pH 8 with NaOH and NaHCO3, then washed with 5 volumes of ethyl acetate (non-ketotic fraction). (4) The lower layer were hydrolyzed by adding 0.5 micromilligram concentrated hydrogen chloride and left for an hour at room temperature, then the liberated steroids were extracted with ethyl acetate (ketotic fraction). (5) Ethyl acetate extract was evaporated and redissolved in the mobile phase, then injected to HPLC. To determine the effect of Girard's separation non-ketotic fraction

  8. 新型复合药剂在新郑精煤公司选煤厂的应用%The application of new composite reagent in coal preparation plant of Xinzheng Coal Company

    Institute of Scientific and Technical Information of China (English)

    蒋莉; 陶秀祥; 张许峰; 曾维晨

    2014-01-01

    随着我国原生煤泥量上升致使浮选量加大,选择一种药耗低、效果好、成本低的浮选药剂是提高经济效益的有效途径。本文所使用的复合药剂通过红外光谱分析,具有捕收和起泡的双重功能。随后对常规浮选药剂和新型复合药剂进行了试验研究及对比,发现新型复合药剂在药耗、浮选速度和浮选效果方面都比常规药剂好,且在浮选精煤产率、浮选完善指标和可燃体回收率方面也比较理想。%Following the improvement in mining technology,more native slime are generaG ted,resulting in the increased work load of flotation process.Thus,it will be an effective way for a preparation plant to improve its economic performance by use of flotation reagent characterized by high performance,low cost and low consumption.It was found by infrared spectroscopy that the compound reagent analyzed in this paper had a dual function of collecting and foaming.The reG sults of a series of contrastive experiments between the new composite and the conventional flotaG tion reagent showed that the new agent had better performancein terms of agent consumption and flotation speed than conventional agent.In addition,the new flotation agent showed more ideal cleaned coal yield and flotation perfection index,as well as recovery rate of combustible materials.

  9. Isoquinolinium bromochromate: An efficient and stable reagent for bromination of hydroxylated aromatic compounds and oxidation of alcohols

    Institute of Scientific and Technical Information of China (English)

    Sandeep V. Khansole; Shivaji B. Patwari; Archana Y. Vibhute; Yeshwant B. Vibhute

    2009-01-01

    The new chromium (VI) oxidizing reagent isoquinolinium bromochromate (IQBC) was prepared and characterized. The IQBC has been found to be stable and an efficient solid reagent which can be easily prepared in good yield. It act as an efficient brominating reagent for hydroxylated aromatic compounds as well as good oxidizing reagent for the conversion of alcohols to carbonyl compounds in good to excellent yield. The synthesized isoquinolinium bromochromate is more ideal reagent, with number of specification including: higher yield, mild conditions and easy preparation. The results obtained with isoquinolinium bromochromate are satisfactory and suggest that the reagent has few advantages over the existing chromium (VI) reagents.

  10. Resolution and isolation of enantiomers of (±)-isoxsuprine using thin silica gel layers impregnated with L-glutamic acid, comparison of separation of its diastereomers prepared with chiral derivatizing reagents having L-amino acids as chiral auxiliaries.

    Science.gov (United States)

    Bhushan, Ravi; Nagar, Hariom

    2015-03-01

    Thin silica gel layers impregnated with optically pure l-glutamic acid were used for direct resolution of enantiomers of (±)-isoxsuprine in their native form. Three chiral derivatizing reagents, based on DFDNB moiety, were synthesized having l-alanine, l-valine and S-benzyl-l-cysteine as chiral auxiliaries. These were used to prepare diastereomers under microwave irradiation and conventional heating. The diastereomers were separated by reversed-phase high-performance liquid chromatography on a C18 column with detection at 340 nm using gradient elution with mobile phase containing aqueous trifluoroacetic acid and acetonitrile in different compositions and by thin-layer chromatography (TLC) on reversed phase (RP) C18 plates. Diastereomers prepared with enantiomerically pure (+)-isoxsuprine were used as standards for the determination of the elution order of diastereomers of (±)-isoxsuprine. The elution order in the experimental study of RP-TLC and RP-HPLC supported the developed optimized structures of diastereomers based on density functional theory. The limit of detection was 0.1-0.09 µg/mL in TLC while it was in the range of 22-23 pg/mL in HPLC and 11-13 ng/mL in RP-TLC for each enantiomer. The conditions of derivatization and chromatographic separation were optimized. The method was validated for accuracy, precision, limit of detection and limit of quantification.

  11. Trivalent Gd-DOTA reagents for modification of proteins† †Electronic supplementary information (ESI) available: Synthetic details for known compounds; materials and methods for bioconjugation reactions; copies of spectra of new compounds and compounds prepared according to new procedures. See DOI: 10.1039/c5ra20359g Click here for additional data file.

    Science.gov (United States)

    Fisher, Martin J.; Williamson, Daniel J.; Burslem, George M.; Plante, Jeffrey P.; Manfield, Iain W.; Tiede, Christian; Ault, James R.; Stockley, Peter G.; Plein, Sven; Maqbool, Azhar; Tomlinson, Darren C.; Foster, Richard; Warriner, Stuart L.

    2015-01-01

    The development of novel protein-targeted MRI contrast agents crucially depends on the ability to derivatise suitable targeting moieties with a high payload of relaxation enhancer (e.g., gadolinium(iii) complexes such as Gd-DOTA), without losing affinity for the target proteins. Here, we report robust synthetic procedures for the preparation of trivalent Gd-DOTA reagents with various chemical handles for site-specific modification of biomolecules. The reagents were shown to successfully label proteins through isothiocyanate ligation or through site-specific thiol–maleimide ligation and strain-promoted azide–alkyne cycloaddition. PMID:27019702

  12. Spectrophotometric determination of tannins by phosphotungstic-phosphomolibdic reagent

    International Nuclear Information System (INIS)

    There are several colorimetric techniques to determine tannins in plant extracts. One frequently used is the Folin method (phosphotungstic acid reagent) that procedures a blue color with phenolic compounds. However, this coloured complex is unstable. With the Folin-Ciocalteau reagent, used in protein determination (Lowry et al. J.B.C. 193: 265, 1951) good results were obtained, even in the absence of cooper solution. Using phosphotungstic-phosphomolibdic reagent (Folin-Denis), it was obtained maximum color with 1,0 ml of the reagent in 20 minutes, after the adition of 10 ml 20% sodium carbonate solution. Tannins samples containing 10 to 200 μg/ml were analysed. Absorbances are determined at 720 or 600 nm. Tannins of commercial preparations from Acacia negra were analysed by the phosphotungstic-phosphomolibdic reagent before (A) and after (B) treatment with chromate hyde powder. By this procedure hydrolysible tannins were determined (A-B). (Author)

  13. Spectrophotometric determination of tannins by phosphotungstic-phosphomolybdic reagent

    Energy Technology Data Exchange (ETDEWEB)

    Reicher, F.; Sierakowski, M.R.; Correa, J.B.C. (Parana Univ., Curitiba (Brazil). Dept. de Bioquimica)

    1981-01-01

    There are several colorimetric techniques to determine tannins in plant extracts. One frequently used is the Folin method (phosphotungstic acid reagent) that procedures a blue color with phenolic compounds. However, this coloured complex is unstable. With the Folin-Ciocalteau reagent, used in protein determination (Lowry et al. J.B.C. 193: 265, 1951) good results were obtained, even in the absence of cooper solution. Using phosphotungstic-phosphomolybdic reagent (Folin-Denis), it was obtained maximum color with 1,0 ml of the reagent in 20 minutes, after the additon of 10 ml 20% sodium carbonate solution. Tannins samples containing 10 to 200 ..mu..g/ml were analysed. Absorbances are determined at 720 or 600 nm. Tannins of commercial preparations from Acacia negra were analysed by the phosphotungstic-phosphomolybdic reagent before (A) and after (B) treatment with chromate hyde powder. By this procedure hydrolysible tannins were determined (A-B).

  14. Reversed-phase high-performance liquid chromatographic separation of diastereomers of (R,S)-mexiletine prepared by microwave irradiation with four new chiral derivatizing reagents based on trichloro-s-triazine having amino acids as chiral auxiliaries and 10 others having amino acid amides.

    Science.gov (United States)

    Bhushan, Ravi; Dixit, Shuchi

    2010-12-01

    A new series of chiral derivatizing reagents (CDRs) consisting of four dichloro-s-triazine reagents was synthesized by nucleophilic substitution of one chlorine atom in trichloro-s-triazine with amino acids, namely L-Leu, D-Phg, L-Val and L-Ala as chiral auxiliaries. Two other sets of CDRs consisting of four dichloro-s-triazine (DCT) and six monochloro-s-triazine (MCT) reagents were also prepared by nucleophilic substitution of chlorine atom(s) with different amino acid amides as chiral auxiliaries in trichloro-s-triazine and its 6-methoxy derivative, respectively. These 14 CDRs were used for the synthesis of diastereomers of (R,S)-mexiletine under microwave irradiation (i.e. 60s and 90 s at 85% power (of 800 W) using DCT and MCT reagents, respectively), which were resolved by reversed-phase high-performance liquid chromatography using C18 column and gradient eluting mixtures of methanol with aqueous trifluoroacetic acid (TFA) with UV detection at 230 nm. The resolution (R(s)), difference between retention times of resolved diastereomers (Δt) and retention factors (k) obtained for the three sets of diastereomers were compared among themselves and among the three groups. Explanations have been offered for longer retention times and better resolution of diastereomers prepared with DCT reagents in comparison of their MCT counterparts and, for the influence of hydrophobicity of the side chain R of the amino acid in the CDRs on retention times and resolution. The newly synthesized CDRs were observed to be superior as compared to their amide counterparts in terms of providing better resolution and cost effectiveness. The method was validated for limit of detection, linearity, accuracy and precision. PMID:21035811

  15. Preparation of probiotics-astragalus complex biological reagent and its effect on broilers%益生菌-黄芪复合生物制剂的制备及其对肉仔鸡的影响

    Institute of Scientific and Technical Information of China (English)

    王永芬; 乔宏兴; 席磊; 耿爱莲; 李华玮; 边传周

    2011-01-01

    This research was engaged in study on synergistic effect of Probiotics and Astragalus on production of broilers. In this experiment, broilers lactobacillus microcapsule, bacillus subtilis powder, bacillus licheniformis powder and Astragalus were mixed by the mass ratio of 3: 1 : 1 : 3 to prepare the Probiotics-Astragalus complex biological reagent. 2 g/kg Probiotics reagent,4 g/kg Astragalus and 4、5 and 6 g/kg Probiotics-Astragalus complex biological reagent were added respectively in the based diet of 3 days old of AA broilers. The result showed that Probiotics-Astragalus had better effect than Probiotics and Astragalus groups; 1 ) Broiler product performances in Probiotics-Astragalus group were significantly increased compared with Probiotics and Astragalus groups, such as daily weight gain increased 14.01% - 24.90% and 13.40% - 24.24% ,and the ratio of feed to meat decreased 14.56% - 7.28% and 14.15% -6.83% respectively. 2) Immunity ability in Probiotics-Astragalus group increased significantly compared with Probiotics and Astragalus groups, for example, bursal index increased 23.53%-28.10% and 29.45 % - 34. 25 %, and spleen index increased 31.65 % - 34.53 % and 46.4 % - 49.6 % respectively. 3) Increased the production of antibody for broilers newcastle disease and improving intestinal flora (P<0.05). Synergistic effect achieved the best when adding 5 g/kg supplement in Probiotics-Astragalus group. Probiotics and astragalus had better synergistic effect in improving the performance, immunity ability and intestinal flora of the broilers.%为探讨益生菌与黄芪联合使用在内仔鸡生产中的协同作用效果.把鸡源乳杆菌微胶囊、枯草芽孢杆菌菌粉、地衣芽孢杆菌粉和黄芪粉按照质量比3∶1:1∶3的比例混合复配成益生菌-黄芪复合生物制剂;在3日龄AA肉仔鸡基础日粮中分别添加2 g/kg复合益生菌制剂、4 g/kg黄芪粉和4、5和6 g/kg益生菌-黄芪复合生物

  16. Reagent for treating drilling muds

    Energy Technology Data Exchange (ETDEWEB)

    Khariv, I.Yu.; Kornyaga, F.V.; Mukhin, A.V.

    1982-01-01

    A reagent is proposed for treating drilling muds containing a polymer of acryl series and alkali solution of sodium humates or potassium humates. It is distinguished by the fact that in order to improve the flocculating capacity of the reagent it contains as the polymer of the acryl series polyacrylamide with the following ratio of ingredients (% by mass): polyacrylamide 0.5-10.0; alkali solution of sodium or potassium humates 90.0-99.5. The alkali solution of sodium or potassium humates contains 0.1-1 0/00 of sodium or potassium humates and 4-5% alkali.

  17. TFFH as an excellent reagent for acylation of alcohols, thiols and dithiocarbamates

    DEFF Research Database (Denmark)

    Pittelkow, M.; Kamounah, F. S.; Boas, Ulrik;

    2004-01-01

    A convenient and easy procedure to synthesize esters and thioesters from the corresponding carboxylic acid using TFFH as the coupling reagent is described. The preparation of N-acyl-dithiocarbamates from carboxylic acids and 1,3-thiazolidine-2-thione with TFFH as the coupling reagent is also...

  18. Intramolecular cyclization of steroidal semicarbazones to pyrazoles using Vilsmeier reagent

    Institute of Scientific and Technical Information of China (English)

    Mahboob Alam; M.Mushfiq

    2008-01-01

    The preparation of hitherto unknown steroidal heterocycles containing pyrazole fused to 6,7-position of the steroidal nucleus is described.These heterocycles were prepared by the action of Vilsmeier reagent with steroidal semicarbazones in DMF.The slructure of the compounds has been established on the basis of their elemental analysis and spectral data.A general mechanistic scheme for these reactions is also suggested based on current and previous results.

  19. Standardization of reagents and methods used in cytological and histological practice with emphasis on dyes, stains and chromogenic reagents

    DEFF Research Database (Denmark)

    Lyon, H O; De Leenheer, A P; Horobin, R W;

    1994-01-01

    The need for the standardization of reagents and methods used in the histology laboratory is demonstrated. After definitions of dyes, stains, and chromogenic reagents, existing standards and standards organizations are discussed. This is followed by practical instructions on how to standardize dyes...... and stains through the preparation of reference materials and the development of chromatographic methods. An overview is presented of the problems concerned with standardization of the Romanowsky-Giemsa stain for cytological and histological application. Finally, the problem of how to convince routine...... dye and stain users of the need for standardization in their histology laboratories is discussed....

  20. Radioactive solutions and reagents with certified activity

    International Nuclear Information System (INIS)

    An international directory of radioactive solutions and reagents with certified activity is compiled. Data are given in tables on radioactivity concentration, uncertainty, volume, supplier, availability and form of solutions and reagents

  1. A New Chemiluminescent Triazine Reagent

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new chemiluminescent reagent 7-(4,6-dichloro-1,3,5-triazinylamino)-4-methyl-coumarin (DTMC) was synthesized by linking 7-amino-4-methylcoumarin to cyanuric chloride at 0-5 ° C, and with it a novel chemiluminescence method was developed for the determination of hydrogen peroxide. The selectivity of this method is high, and most of the transition metal ions have no effect on the determination of H2O2.

  2. Synthesis of Cyclohexyl and Isopropyl Ketones from Benzimidazole Methiodide Salt and Grignard Reagents

    Institute of Scientific and Technical Information of China (English)

    杨秉勤; 强琚莉; 白银娟; 路军; 史真

    2003-01-01

    The reaction of 2-alkyl-l, 3-dimethylbenzimidazolinm salts with Grignard reagents gave addition products which were hy-drelyzed to give ketones. A new method for the preparation of cyclohexyl ketones and isopropyl ketones is provided.

  3. Polystyrene-supported Benzyl Selenide: An Efficient Reagent for Highly Stereocontrolled Synthesis of Substituted Olefins

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Polystyrene-supported benzyl selenide has been prepared. This novel reagent was treated with LDA to produce a selenium stabilized carbanion, which reacted with alkyl halide, followed by selenoxide syn-elimination, to give substituted olefins stereospecificly.

  4. 21 CFR 866.4100 - Complement reagent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Complement reagent. 866.4100 Section 866.4100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL... Complement reagent. (a) Identification. A complement reagent is a device that consists of complement,...

  5. 应用猴轮状病毒组织培养抗原制备检测轮状病毒的酶联试剂%THE PREPARATION OF ELISA REAGENT FOR DETECTION OF ROTAVIRUS UTILIZING TISSUE CULTURE ANTIGEN OF SIMIAN ROTAVIRUS

    Institute of Scientific and Technical Information of China (English)

    施耦笙; 丁晓光; 沈方伟

    1988-01-01

    本文报道应用猴轮状病毒组织培养抗原制备检测轮状病毒的ELISA试剂和测定其效果的过程.应用我们的试剂和WHO轮状病毒ELISA试剂盒同时检测腹泻患者粪便标本中的轮状病毒时,阳性符合率为96.23%,阴性符合率为100.0%.应用电镜法和本试剂检测时,阳性符合率为93.33%,阴性符合率为81.82%.本试剂与含有脊髓灰质炎病毒或其他肠道细胞致病性病毒没有产生非特异性反应.结果表明我们研制的检测轮状病毒的ELISA试剂在特异性和敏感性方面是令人满意的.%This paper reports the process of utilizing the tissue culture antigen to prepare the ELISA reagent of rotavirus for the diagnosis of the infection and the determination of its efficiency.Our reagent was used and compared with the WHO ELISA reagent to detect the rotavirus in faecal specimens from the patients whith diarrhea.The positive coincidence rate (sensitivity) was 96.28% and the negative coincidence rate (specificity) was 100%.the positive coincidence rate of the results by the two methods,electronmicroscopy and ELISA,was 93.83% and the negative coincidence rate was 81.82%.There was no nonspecific reaction with faecal specimens which contained poliomyelitis virus or other enteroviruses in our test.The ELISA Kit of rotavirus will be snpplied as a commercial product.

  6. 21 CFR 866.3165 - Cryptococcus neoformans serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cryptococcus neoformans serological reagents. 866... Cryptococcus neoformans serological reagents. (a) Identification. Cryptococcus neoformans serological reagents... dye (immunofluorescent reagents) and are used to identify Cryptococcus neoformans directly...

  7. Storage Conditions of Conjugated Reagents Can Impact Results of Immunogenicity Assays

    Directory of Open Access Journals (Sweden)

    Robert J. Kubiak

    2016-01-01

    Full Text Available Consistent performance of anti-drug antibody (ADA assays through all stages of clinical development is critical for the assessment of immunogenicity and interpretation of PK, PD, safety, and efficacy. The electrochemiluminescent assays commonly employed for ADA measurement use drug conjugated with ruthenium and biotin to bind ADA in samples. Here we report an association between high nonspecific ADA responses in certain drug-naïve individuals and the storage buffer of the conjugated reagents used in a monoclonal antibody ADA assay. Ruthenylated reagents stored in phosphate-buffered saline (PBS buffer had increased levels of aggregate and produced variable and high baseline responses in some subjects. Reagents stored in a histidine-sucrose buffer (HSB had lower aggregate levels and produced low sample responses. In contrast to PBS, conjugated reagents formulated in HSB remained low in aggregate content and in sample response variability after 5 freeze/thaw cycles. A reagent monitoring control (RMC serum was prepared for the real-time evaluation of conjugated reagent quality. Using appropriate buffers for storage of conjugated reagents together with RMCs capable of monitoring of reagent aggregation status can help ensure consistent, long-term performance of ADA methods.

  8. Reagents for radioimmunological determination of carcinoembryonic antigen (CEA)

    International Nuclear Information System (INIS)

    The work was undertaken to prepare the reagents for carcinoembryonic antigen (CEA) radioimmunoassay with double antibody method. The CEA standard of high immunoreactivity was prepared and purified. The purified CEA was used for immunozation of goats. The goat anti - CEA sera were received. IgG fraction from normal goat serum was purified and used for the production of horse anti-goat IgG serum which was then used in the radioimmunoassay of CEA. The labelling of CEA with iodine-125 has been carried out be means of the enzymatic method.(Z.R.)

  9. Palladium-Catalyzed Negishi Cross-Coupling Reaction of Aryl Halides with (Difluoromethyl)zinc Reagent.

    Science.gov (United States)

    Aikawa, Kohsuke; Serizawa, Hiroki; Ishii, Koki; Mikami, Koichi

    2016-08-01

    The palladium-catalyzed Negishi cross-coupling reaction of aryl iodides and bromides with (difluoromethyl)zinc reagent bearing a diamine such as TMEDA is achieved to provide the difluoromethylated aromatic compounds in good to excellent yields. The advantages of (difluoromethyl)zinc reagent are that (1) the derivatives, which possess different stability and reactivity, can be readily prepared via ligand screening and (2) transmetalation of a difluoromethyl group from the zinc reagent to palladium catalyst efficiently proceeds without an activator. PMID:27442347

  10. Preparation of lyophilized kit of HYNIC-[Tyr3]-Octreotate and labelling studies with 99m-Technetium; Preparo do reagente liofilizado HYNIC-[Ty3{sup 3}]-Octreotato e estudo de marcacao com Tecnecio-99m

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Ivani Bortoleti

    2008-07-01

    The development of radiolabeled molecules with high specificity for an organ ar tumor has been contributed to the precise diagnostic in nuclear medicine. Somatostatin labeled derivatives constitutes a particular example of labeled peptide applied in the localization of neuroendocrine tumors. Nowadays, the {sup 111}In DTPA-octreotide is the radiopharmaceutical applied in diagnostic procedures for the visualization of tumors with high expression of somatostatin receptors. However, the 111-indium is a radionuclide that presents some limitations related to availability (cyclotron production), half-life (67 hours) and the emission of medium energy photons (171 keV e 245 keV), not favorable to the acquisition of images in SPECT (Single Photon Emission Computed Tomography). The favorable physical properties of the {sup 99m}-technetium ({sup 99m}Tc) make this radionuclide the more favorable to substitute the 111-indium on peptide labeling procedures. This work studied the preparation and labeling of a lyophilized kit of HYNIC-Tyr{sup 3}-octreotate (HYNIC-octreotate) with {sup 99m}Tc, base on previously described procedures and using tricine and EDDA (ethylendiaminediacetic acid) as coligands. It was studied the labeling parameters (incubation time, temperature, volume and perthecnetate activity) and the stability of the lyophilized preparation. Additionally, it was studied the influence of the pre-freezing using liquid nitrogen in the stability of the lyophilized preparation, as well as the influence of manitol in the labeling yield and biological distribution of the complex. The stability studies showed that the lyophilization using liquid nitrogen pre-freezing resulted in a lyophilized preparation with stability over 4 month when stored under refrigeration. The stability of the lyophilized preparation obtained without liquid nitrogen pre-freezing was similar.The labeling studies determined the best labeling conditions, resulting in a radiochemical yield superior than 90

  11. Synthesis of Tetrahydronaphthyridines from Aldehydes and HARP Reagents via Radical Pictet-Spengler Reactions.

    Science.gov (United States)

    Jackl, Moritz K; Kreituss, Imants; Bode, Jeffrey W

    2016-04-15

    The combination of aldehydes with newly designed HARP (halogen amine radical protocol) reagents gives access to α-substituted tetrahydronaphthyridines. By using different HARP reagents, various regioisomeric structures can be prepared in a single operation. These products, which are of high value in medicinal chemistry, are formed in a predictable manner via a formal Pictet-Spengler reaction of electron-poor pyridines that would not participate in the corresponding polar reactions. PMID:27026179

  12. Aminodifluorosulfinium Salts: Selective Fluorination Reagents with Enhanced Thermal Stability and Ease of Handling† , ‡

    OpenAIRE

    L’Heureux, Alexandre; Beaulieu, Francis; Bennett, Christopher; Bill, David R.; Clayton, Simon; LaFlamme, François; Mirmehrabi, Mahmoud; Tadayon, Sam; Tovell, David; Couturier, Michel

    2010-01-01

    Diethylaminodifluorosulfinium tetrafluoroborate (XtalFluor-E) and morpholinodifluorosulfinium tetrafluoroborate (XtalFluor-M) are crystalline fluorinating agents that are more easily handled and significantly more stable than Deoxo-Fluor, DAST, and their analogues. These reagents can be prepared in a safer and more cost-efficient manner by avoiding the laborious and hazardous distillation of dialkylaminosulfur trifluorides. Unlike DAST, Deoxo-Fluor, and Fluolead, XtalFluor reagents do not gen...

  13. Clinical Evaluation on Several anti- HIV Diagnostic Reagents

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Objective We Joined clinical evaluation on 6 anti - HIV diagnostic reagents which was organized by National Reference Laboratory of National Center for AIDS Prevention and Control. Method 100 sera of known result and 100 sera of unknown result were detected with 6 reagents according to test procedure of the reagents. Result The crude agreement (99.5 % ) of Organon Teknika and Determine reagents were higher than that of the other reagents. No anti - HIV positive serum was detected negative with Organon Teknika and Determine reagents. The sensitivity and specificity of Organon Teknika and Determine reagents were higher than those of the other reagents. The capacity of Organon Teknika reagent to detect the mild positive serum was greater than that of the other reagent. Conclusion Organon Teknika and Determine antiHIV diagnostic reagents were qualified for anti - HIV screening test while the other 4 reagents should be improved on sensitivity and specificity.

  14. Dynamic modification of silicon gel with complexing reagents grafted by hydrophobic groups and following sorption of metals

    International Nuclear Information System (INIS)

    Retention of group reagents of three classes: dioximes, β-diketones, 8-hydroxyquinoline and its derivatives (8-Ox, MO, PAO), as well as HDEHP on hydrophobic silica gel C15, was studied under dynamic conditions. Retention dependences on Kdistr of reagent were obtained, from which the possibility of correct choice of reagent with required properties fit for the preparation of noncovalently modified sorbent follows. Sorptional behaviour of Cd, Co(2), Zn, Mg, Cu, Pb on the sorbents prepared is considered. Retention series are obtained, which are well comparable with the extraction ones

  15. Optical chemosensors and reagents to detect explosives

    OpenAIRE

    Salinas Soler, Yolanda; Martínez Mañez, Ramón; Marcos Martínez, María Dolores; Sancenón Galarza, Félix; Costero Nieto, Ana Maria; PARRA ALVAREZ, MARGARITA; GIL GRAU, SALVADOR

    2012-01-01

    This critical review is focused on examples reported from 1947 to 2010 related to the design of chromo-fluorogenic chemosensors and reagents for explosives (141 references). © 2012 The Royal Society of Chemistry.

  16. Silver nanoparticles incorporated onto ordered mesoporous silica from Tollen's reagent

    Science.gov (United States)

    Zienkiewicz-Strzałka, M.; Pasieczna-Patkowska, S.; Kozak, M.; Pikus, S.

    2013-02-01

    Noble metal nanostructures supported on mesoporous silica are bridge between traditional silica adsorbents and modern catalysts. In this work the Ag/SBA-15 mesoporous materials were synthesized and characterized. Various forms of nanosilver supported on ordered mesoporous template have been successfully obtained via proposed procedures. In all synthesized materials, Tollen's reagent (diammine silver complex [Ag(NH3)2]+) was used as a silver source. Silver nanoparticles were prepared by reduction of ammoniacal silver complex by formaldehyde in the solution of stabilizer. After reduction, Ag nanoparticles could be deposited on SBA-15, or added during traditional synthesis of SBA-15 giving silver or silver chloride nanoparticles in the combination with porous silica. Silver nanostructures as nanoparticles or nanowires were also embedded onto the SBA-15 by incipient wetness impregnation of silver ions. Absorbed silver ions were next reduced under hydrogen at high temperature. There are many advantages of utilized ammoniacal silver complex as a silver source. Proposed method is capable to synthesis of various metal nanostructures with controlled composition and morphology. The silver ammonia complex is composed of two ions surrounding and protecting the central silver ion, so it is possible to obtain very small nanoparticles using simple approach without any functionalization of external and internal surface of SBA-15. This approach allows obtaining greatly small silver nanoparticles on SBA-15 (4 nm) or nanowires depending on the metal loading amount. Moreover, the colloidal silver solution prepared from Tollen's reagent, in the presence of triblock copolymer, remains stable for a long time. Reduction of Tollen's reagent to silver colloidal solution seems to be efficient, fast and interesting approach for the preparation of supported silver nanostructures Obtained samples were characterized by powder X-ray diffraction, small angle X-ray scattering (SAXS), UV

  17. Dosing of Reagents and Solid Supports as Tablets

    Institute of Scientific and Technical Information of China (English)

    T. Ruhland; P. Holm; K Andersen

    2005-01-01

    @@ 1Introduction During the latest decade, the intensive investigation into the solid-phase synthesis of small organic molecules, as well as the use of polymer-supported reagents and catalysts for solution-phase organic synthesis has lead to paradigm shifts in many areas of chemistry. This has particularly been the case within the fields of biological and medicinal chemistry where the parallel synthesis of discrete molecules (in series or larger libraries), either by manual or automated methods, has been implemented as a key technology/methodology in the preparation of compounds for biological evaluation[1a-c].

  18. Electrophilic, Activation-Free Fluorogenic Reagent for Labeling Bioactive Amines.

    Science.gov (United States)

    Sintes, Miquel; De Moliner, Fabio; Caballero-Lima, David; Denning, David W; Read, Nick D; Kielland, Nicola; Vendrell, Marc; Lavilla, Rodolfo

    2016-06-15

    Herein we report the preparation of BODIPY mesoionic acid fluorides through a short sequence involving an isocyanide multicomponent reaction as the key synthetic step. These novel BODIPY acid fluorides are water-stable electrophilic reagents that can be used for the fluorescent derivatization of amine-containing biomolecules using mild and activation-free reaction conditions. As a proof of principle, we have labeled the antifungal natamycin and generated a novel fluorogenic probe for imaging a variety of human and plant fungal pathogens, with excellent selectivity over bacterial cells. PMID:27248580

  19. X-Ray Crystallography Reagent

    Science.gov (United States)

    Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)

    2003-01-01

    Microcapsules prepared by encapsulating an aqueous solution of a protein, drug or other bioactive substance inside a semi-permeable membrane by are disclosed. The microcapsules are formed by interfacial coacervation under conditions where the shear forces are limited to 0-100 dynes per square centimeter at the interface. By placing the microcapsules in a high osmotic dewatering solution. the protein solution is gradually made saturated and then supersaturated. and the controlled nucleation and crystallization of the protein is achieved. The crystal-filled microcapsules prepared by this method can be conveniently harvested and stored while keeping the encapsulated crystals in essentially pristine condition due to the rugged. protective membrane. Because the membrane components themselves are x-ray transparent, large crystal-containing microcapsules can be individually selected, mounted in x-ray capillary tubes and subjected to high energy x-ray diffraction studies to determine the 3-D smucture of the protein molecules. Certain embodiments of the microcapsules of the invention have composite polymeric outer membranes which are somewhat elastic, water insoluble, permeable only to water, salts, and low molecular weight molecules and are structurally stable in fluid shear forces typically encountered in the human vascular system.

  20. 21 CFR 866.3355 - Listeria spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Listeria spp. serological reagents. 866.3355... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3355 Listeria spp. serological reagents. (a) Identification. Listeria spp. serological reagents are devices that consist...

  1. 21 CFR 866.3085 - Brucella spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Brucella spp. serological reagents. 866.3085... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3085 Brucella spp. serological reagents. (a) Identification. Brucella spp. serological reagents are devices that consist...

  2. 21 CFR 866.3110 - Campylobacter fetus serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Campylobacter fetus serological reagents. 866.3110... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3110 Campylobacter fetus serological reagents. (a) Identification. Campylobacter fetus serological reagents are...

  3. 21 CFR 866.3125 - Citrobacter spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Citrobacter spp. serological reagents. 866.3125... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3125 Citrobacter spp. serological reagents. (a) Identification. Citrobacter spp. serological reagents are devices...

  4. 21 CFR 866.3550 - Salmonella spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Salmonella spp. serological reagents. 866.3550... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3550 Salmonella spp. serological reagents. (a) Identification. Salmonella spp. serological reagents are devices...

  5. 21 CFR 866.3660 - Shigella spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Shigella spp. serological reagents. 866.3660... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3660 Shigella spp. serological reagents. (a) Identification. Shigella spp. serological reagents are devices that consist...

  6. 21 CFR 866.3740 - Streptococcus spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Streptococcus spp. serological reagents. 866.3740... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3740 Streptococcus spp. serological reagents. (a) Identification. Streptococcus spp. serological reagents are...

  7. 21 CFR 866.3040 - Aspergillus spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Aspergillus spp. serological reagents. 866.3040... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3040 Aspergillus spp. serological reagents. (a) Identification. Aspergillus spp. serological reagents are devices...

  8. 21 CFR 866.3500 - Rickettsia serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rickettsia serological reagents. 866.3500 Section... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3500 Rickettsia serological reagents. (a) Identification. Rickettsia serological reagents are devices that consist of...

  9. 21 CFR 866.3375 - Mycoplasma spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mycoplasma spp. serological reagents. 866.3375... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Serological Reagents § 866.3375 Mycoplasma spp. serological reagents. (a) Identification. Mycoplasma spp. serological reagents are devices...

  10. 21 CFR 866.3220 - Entamoeba histolytica serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Entamoeba histolytica serological reagents. 866... Entamoeba histolytica serological reagents. (a) Identification. Entamoeba histolytica serological reagents... Entamoeba histolytica in serum. Additionally, some of these reagents consist of antisera conjugated with...

  11. 21 CFR 864.8100 - Bothrops atrox reagent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bothrops atrox reagent. 864.8100 Section 864.8100...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Hematology Reagents § 864.8100 Bothrops atrox reagent. (a) Identification. A Bothrops atrox reagent is a device made from snake venom and used to determine blood...

  12. Production of reagents for cleaning fluids

    Energy Technology Data Exchange (ETDEWEB)

    Grunberg, I.V.; Korostyleva, R.N.; Pytel, S.P.; Spasskii, P.I.; Titarenko, N.K.; Trachtenberg, S.I.; Yushkevich, V.I.

    1980-10-25

    A method for producing reagents for cleaning fluids is proposed using polymerization of acrylonitril, metachrylate or a mixture of the two in water and saponification of the polymers with alakali. To reduce the consumption of monomers and increase the quality of the reagents, 0.4-1.0 parts humic substances, 0.2-1.0 parts hydrolizate from tanning waste products and 1.2-4.0 parts monomers are added to the reaction medium, followed by copolymerization in an acid medium. The proposed method ensures quality reagents which combine lower water yield with a moderate increase in viscosity when acting on clay solutions. Compared with the current method, this method lowers the consumption of an expensive and hard-to-find monomer 1.2-1.4X for one ton of reagent, which lowers the cost of raw material by 1.3-1.7X. This results in a savings of 195-385 rubles per ton of reagent, 600-1200 thousand at 3000 tons/yr.

  13. Polystyrene-supported Selenomethyl-sulfonates:Efficient Reagents for Stereocontrolled Synthesis of Substituted Vinyl Sulfones

    Institute of Scientific and Technical Information of China (English)

    Wei Ming XU; Lu Ling WU; Xian HUANG

    2004-01-01

    Polystyrene-supported selenomethyl-sulfonates have been prepared. These novel reagents were treated with LDA to produce selenium stabilized carbanions, which reacted with alkyl halide and epoxides, followed by selenoxide syn-elimination, to give E-vinyl sulfones and γ-hydroxy-substituted-E-vinyl sulfones respectively.

  14. Blister pouches for effective reagent storage and release for low cost point-of-care diagnostic applications

    Science.gov (United States)

    Smith, Suzanne; Sewart, Rene; Land, Kevin; Roux, Pieter; Gärtner, Claudia; Becker, Holger

    2016-03-01

    Lab-on-a-chip devices are often applied to point-of-care diagnostic solutions as they are low-cost, compact, disposable, and require only small sample volumes. For such devices, various reagents are required for sample preparation and analysis and, for an integrated solution to be realized, on-chip reagent storage and automated introduction are required. This work describes the implementation and characterization of effective liquid reagent storage and release mechanisms utilizing blister pouches applied to various point-of-care diagnostic device applications. The manufacturing aspects as well as performance parameters are evaluated.

  15. Synthesis of reagents for fluoride technologies

    Institute of Scientific and Technical Information of China (English)

    Gordienko; P.; S.; Kolzunov; V.; A.; Dostovalov; V.; A.; Kaidalova; T.; A.

    2005-01-01

    Growing demand for fluorinating reagents to be used in rare-metal industry has stimulated conducting research in the field of production for these reagents. That is why the fluorinating reagents production has recently formed an independent segment of industry. Main industrial fluorinating reagents include hydrofluoric acid, anhydrous hydrogen fluoride, technical ammonium hydrodifluoride, fluorosilicic acid and its salts. To produce technical etching acid, fluor-spar with calcium fluoride content at least 92% is used in most cases. To produce anhydrous hydrogen fluoride, fluor-spar with calcium fluoride content 96 %-97 % is necessary. The fluorine-containing raw materials refinement from silica by means of flotation makes the fluorinating reagents production substantially more expensive. In this work we have attempted to process unconcentrated raw materials by fluorine removal in the form of volatile silicon tetrafluoride. In this process silicon tetrafluoride was recovered by liquid ammonia with subsequent hydrolysis of the formed ammonia hexafluorosilicate. Hydrolysis occurred according to the reaction:(NH4)2 SiF6 + 4NH3 + 2 H2O= 6NH4F+ SiO2 The products of the ammonia hexafluorosilicate hydrolysis included ammonia fluoride and amorphous silica gel ("white soot") as by-product. This "white soot" was of high purity-with main component content 99.95% and total admixture content 0.05%. Silica gel is a superfine material with specific surface of 267.6 m2/g and is recommended as filler in the production of rubber, plastics and for other applications.Ammonia fluoride was transformed into ammonia hydrodifluoride (main processing product) according to the reaction:2NH4F→NH3+NH4 HF2 It was stated that the NH4F: NH4 HF2 ratio depends on boiling point temperature-with its increase the ammonia hydrofluoride concentration in solution increases as well.

  16. Stereoselective synthesis and reactions of secondary alkyllithium reagents functionalized at the 3-position.

    Science.gov (United States)

    Moriya, Kohei; Didier, Dorian; Simon, Meike; Hammann, Jeffrey M; Berionni, Guillaume; Karaghiosoff, Konstantin; Zipse, Hendrik; Mayr, Herbert; Knochel, Paul

    2015-02-23

    Secondary alkyllithium reagents bearing an OTBS group (TBS=tert-butyldimethylsilyl) at the 3-position can be prepared stereoconvergently through an I/Li exchange from a diastereomeric mixture of the corresponding secondary alkyl iodides. These lithium reagents react with a range of electrophiles, including carbon electrophiles, with retention of configuration to yield various 1,3-difunctionalized derivatives with good diastereoselectivities. Kinetic studies show that the 3-siloxy group strongly accelerates the epimerization at the lithium-substituted carbon atom. This method offers a new way to construct chiral open-chain molecules with excellent stereoselectivity. PMID:25640227

  17. Development of Ammonia Gas Sensor Using Optimized Organometallic Reagent

    Directory of Open Access Journals (Sweden)

    J. Aubrecht

    2016-01-01

    Full Text Available Reliable, continuous, and spatially distributed monitoring of dangerous or irritating chemical substances belongs to standard functions of contemporary industrial and public security systems. Fiber-optic-based detection provides feasible platform to fulfill such aims. This paper deals with characterization of ammonia sensing elements based on multimode polysiloxane-clad silica-core optical fibers sensitized with 5-(4′-dioctylamino phenylimino quinoline-8-1 cobalt bromide complex reagent immobilized into the cross-linked polymer matrix from a proper mixture of organic solvents and a radical scavenger contributing to the desired long-term stability of optical properties. The applied sensing mechanism combines optical detection principle with chemical reaction of the reagent and ammonia resulting in changes in the visible near-infrared optical absorption spectrum of the cladding layer, influencing via evanescent optical field interactions the spectral distribution of the guided light intensity. Reaction kinetics of short fiber sections exposed to ammonia/nitrogen mixture of various ammonia concentrations is tested and evaluated. The obtained sensitivity, limit of detection, and forward response time of the prepared sensors amount to 1.52⁎10-5 ppm−1, 31 ppm, and 25 s, respectively. The obtained results are promising for fabrication of distributed fiber-optic sensors applicable to detection and location of ammonia gas leaks in industrial as well as general public premises.

  18. Fenton's Reagent. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    The Fenton's Reagent DNAPL treatment process is an in situ oxidation method to destroy DNAPLs in groundwater. Residual industrial solvents, primarily Dense Non-Aqueous Phase Liquids (DNAPLs), are currently the most significant barrier to successful completion of most large groundwater and soil cleanup efforts. DNAPL pools and residues slowly dissolve into surrounding groundwater to create large plumes of organic solvent contamination with concentration levels far above regulatory limits

  19. Reaction of Polymer-supported Selenovinyl Bromide with Grignard Reagents: A Facile Route to the Synthesis of(E)-1, 2-Disubstituted Olefins

    Institute of Scientific and Technical Information of China (English)

    E TANG; Xiang Jin LIN; Lu Ling WU

    2005-01-01

    Polymer-supported selenovinyl bromide, easily prepared from polymer-supported selenenyl bromide with acetylene, reacts with different Grignard reagents using a step-by-step strategy to obtain (E)-1, 2-disubstituted ethenes in good yields.

  20. 21 CFR 866.3255 - Escherichia coli serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Escherichia coli serological reagents. 866.3255... coli serological reagents. (a) Identification. Escherichia coli serological reagents are devices that consist of antigens and antisera used in serological tests to identify Escherichia coli from...

  1. 21 CFR 660.30 - Reagent Red Blood Cells.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Reagent Red Blood Cells. 660.30 Section 660.30...) BIOLOGICS ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS Reagent Red Blood Cells § 660.30 Reagent Red Blood Cells. (a) Proper name and definition. The proper name of the product shall...

  2. 21 CFR 866.3930 - Vibrio cholerae serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Vibrio cholerae serological reagents. 866.3930... cholerae serological reagents. (a) Identification. Vibrio cholerae serological reagents are devices that are used in the agglutination (an antigen-antibody clumping reaction) test to identify Vibrio...

  3. 21 CFR 866.3680 - Sporothrix schenckii serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Sporothrix schenckii serological reagents. 866... Sporothrix schenckii serological reagents. (a) Identification. Sporothrix schenckii serological reagents are... Sporothrix schenckii in serum. The identification aids in the diagnosis of sporothrichosis caused by a...

  4. 21 CFR 866.3700 - Staphylococcus aureus serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Staphylococcus aureus serological reagents. 866... Staphylococcus aureus serological reagents. (a) Identification. Staphylococcus aureus serological reagents are... epidemiological information on these diseases. Certain strains of Staphylococcus aureus produce an...

  5. 21 CFR 866.3460 - Rabiesvirus immuno-fluorescent reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rabiesvirus immuno-fluorescent reagents. 866.3460... immuno-fluorescent reagents. (a) Identification. Rabiesvirus immunofluorescent reagents are devices that consist of rabiesvirus antisera conjugated with a fluorescent dye used to identify rabiesvirus...

  6. 21 CFR 866.3850 - Trichinella spiralis serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Trichinella spiralis serological reagents. 866... Trichinella spiralis serological reagents. (a) Identification. Trichinella spiralis serological reagents are... Trichinella spiralis in serum. The identification aids in the diagnosis of trichinosis caused by...

  7. 21 CFR 866.3780 - Toxoplasma gondii serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Toxoplasma gondii serological reagents. 866.3780... gondii serological reagents. (a) Identification. Toxoplasma gondii serological reagents are devices that consist of antigens and antisera used in serological tests to identify antibodies to Toxoplasma gondii...

  8. 21 CFR 864.4400 - Enzyme preparations.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Enzyme preparations. 864.4400 Section 864.4400...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4400 Enzyme preparations. (a) Identification. Enzyme preparations are products that are used in the...

  9. Use of platinized magnesium as reagent replacing zinc in hydrogen isotope analysis

    International Nuclear Information System (INIS)

    Platinized magnesium has recently been proposed as a new reducing agent for the conversion of small quantities of water to hydrogen in a flame-sealed borosilicate glass tube at 400 deg. C for isotopic analysis. Th reagent, Mg-Pt, in contrast to zinc can be prepared in every laboratory by coating of a magnesium granulate with a thin layer of platinum by reaction with H2PtCl6*6H2O dissolved in acetone-ether mixture. Excellent reproducibility of the isotope ratios in hydrogen gas prepared from water samples has been obtained at proportion 4 μL of water to 120 mg of the reagent. (author). 12 refs, 1 fig., 1 tab

  10. Collection of radon with solid oxidizing reagents

    International Nuclear Information System (INIS)

    Although it is generally considered to be inert, radon reacts spontaneously at ambient temperature with a number of fluorine-containing compounds, including dioxygenyl salts, fluoronitrogen salts, and halogen fluoride-metal fluoride complexes. A method for the collection of radon from air, using either dioxygenyl hexafluoroantimonate (O2+SbF6-) or hexafluoroiodine hexafluoroantimonate (IF6+SbF6-) reagent, is described. The air is passed though a drying tube and then through a bed of the reagent, which captures radon as a nonvolatile product. In tests with radon-air mixtures containing 45-210000 pCi/L of radon-222, more than 99% of the radon was retained by beds of powders (2.3-3.0 g of compound/cm2) and pellets (7.5-10.9 g of compound/cm2). The gas mixtures were designed to simulate radon-contaminated atmospheres in underground uranium mines. No dependence of collection efficiency upon radon concentration was observed. The method can be used for the analysis of radon-222 (by measurement of the γ emissions of the short-lived daughters, lead-214 and bismuth-214) and the purification of small volumes of air

  11. Organometallic palladium reagents for cysteine bioconjugation

    Science.gov (United States)

    Vinogradova, Ekaterina V.; Zhang, Chi; Spokoyny, Alexander M.; Pentelute, Bradley L.; Buchwald, Stephen L.

    2015-10-01

    Reactions based on transition metals have found wide use in organic synthesis, in particular for the functionalization of small molecules. However, there are very few reports of using transition-metal-based reactions to modify complex biomolecules, which is due to the need for stringent reaction conditions (for example, aqueous media, low temperature and mild pH) and the existence of multiple reactive functional groups found in biomolecules. Here we report that palladium(II) complexes can be used for efficient and highly selective cysteine conjugation (bioconjugation) reactions that are rapid and robust under a range of bio-compatible reaction conditions. The straightforward synthesis of the palladium reagents from diverse and easily accessible aryl halide and trifluoromethanesulfonate precursors makes the method highly practical, providing access to a large structural space for protein modification. The resulting aryl bioconjugates are stable towards acids, bases, oxidants and external thiol nucleophiles. The broad utility of the bioconjugation platform was further corroborated by the synthesis of new classes of stapled peptides and antibody-drug conjugates. These palladium complexes show potential as benchtop reagents for diverse bioconjugation applications.

  12. Modification of guanine bases by nucleoside phosphoramidite reagents during the solid phase synthesis of oligonucleotides.

    OpenAIRE

    Pon, R T; Damha, M J; Ogilvie, K K

    1985-01-01

    Nucleoside 3'-phosphoramidite and chlorophosphite reagents have been found to react with the lactam function of guanine. This reaction caused unsatisfactory results when oligodeoxyribonucleotides containing a large number of guanine bases were prepared in an automated solid phase synthesizer. The guanine modification is unstable, and leads to depurination and chain cleavage. This side reaction can be eliminated by protecting the O6-position. A new O6-p-nitrophenylethyldeoxyguanosine phosphora...

  13. Selective isolation of components from natural volatile oil by countercurrent chromatography with cyclodextrins as selective reagent.

    Science.gov (United States)

    Tong, Shengqiang; Lu, Mengxia; Chu, Chu; Yan, Jizhong; Huang, Juan; Ying, Yongfei

    2016-04-29

    Selective separation of chemical components from seven kinds of volatile oil by countercurrent chromatography with three types of cyclodextrins as selective reagent was investigated in this work. Preparative separation of chemical components from volatile oil is generally quite challenging due to their extremely complexity of the composition. A biphasic solvent system n-hexane-0.10 mol L(-1) cyclodextrin (1:1, v/v) was selected for separation of components from volatile oil and three types of cyclodextrins were investigated, including β-cyclodexrin, methyl-β-cyclodexrin and hydroxypropyl-β-cyclodexrin. All kinds of volatile oils are from seven kinds of traditional Chinese herb. Results showed that some chemical components could be well separated with high purity from each kind of volatile oil using different type of cyclodextrin as selective reagent. For example, germacrone and curcumenone could be selectively separated from volatile oil of Curcumae Rhizoma with methyl-β-cyclodexrin and hydroxypropyl-β-cyclodexrin as selector respectively, and other five components were selectively separated from volatile oil of Chuanxiong Rhizoma, Myristicae Semen, Aucklandiae Radix and Angelicae Sinensis Radix by countercurrent chromatography with different cyclodexrin as selective reagent. Separation mechanism for separation of components from volatile oil by countercurrent chromatography with cyclodextrin as selective reagent was proposed. Peak resolution of the present separation method could be greatly influenced by the chemical compositions of volatile oil.

  14. A Sequential Preparation of Organic Compounds for Senior Chemistry Classes

    Science.gov (United States)

    Merrigan, Cecilia; Crotty, Patricia

    1971-01-01

    Describes procedures suitable for student preparation of benzaldehyde, benzoic acid, and ethyl benzoate sequentially from benzyl alcohol. Preparation for benzyl chloride also given. All reagents except benzyl alcohol are common inorganic chemicals. (AL)

  15. STUDY ON OIL WASTEWATER TREATMENT WITH POLYMERIC REAGENTS

    OpenAIRE

    RODICA BUCUROIU; MARIUS PETRACHE; VIOREL VLASCEANU; MARIUS GABRIEL PETRESCU

    2016-01-01

    Used the polymeric reagents in oil wastewater treatment is an effective method of eliminate hydrocarbons. The present study aims to finding reagents that lead to lowering of extractible (EXT), suspended solids (SS) and chemical oxygen demand (COD) of industrial wastewater from washing cars in loading ramps petroleum products. For this purpose five reagents were tested, namely: polyamines, cationic polyacrylamides, polydiallydimethyl ammonium chloride (PolyDADMAC), melamine formaldehyde polyme...

  16. Development of versatile isotopic labeling reagents for profiling the amine submetabolome by liquid chromatography–mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Ruokun; Huan, Tao; Li, Liang, E-mail: Liang.Li@ualberta.ca

    2015-06-30

    Highlights: • Two new reagents were developed for chemical isotope labeling mass spectrometry (MS). • They could be used to label amine-containing metabolites in a metabolomic sample. • The labeled metabolites could be detected with much improved sensitivity in MS. • One of the reagents could also help generate useful MS/MS spectra for structural analysis. • These reagents should be useful for quantitative metabolomics. - Abstract: Metabolomic profiling involves relative quantification of metabolites in comparative samples and identification of the significant metabolites that differentiate different groups (e.g., diseased vs. controls). Chemical isotope labeling (CIL) liquid chromatography–mass spectrometry (LC–MS) is an enabling technique that can provide improved metabolome coverage and metabolite quantification. However, chemical identification of labeled metabolites can still be a challenge. In this work, a new set of isotopic labeling reagents offering versatile properties to enhance both detection and identification are described. They were prepared by a glycine molecule (or its isotopic counterpart) and an aromatic acid with varying structures through a simple three-step synthesis route. In addition to relatively low costs of synthesizing the reagents, this reaction route allows adjusting reagent property in accordance with the desired application objective. To date, two isotopic reagents, 4-dimethylaminobenzoylamido acetic acid N-hydroxylsuccinimide ester (DBAA-NHS) and 4-methoxybenzoylamido acetic acid N-hydroxylsuccinimide ester (MBAA-NHS), for labeling the amine-containing metabolites (i.e., amine submetabolome) have been synthesized. The labeling conditions and the related LC–MS method have been optimized. We demonstrate that DBAA labeling can increase the metabolite detectability because of the presence of an electrospray ionization (ESI)-active dimethylaminobenzoyl group. On the other hand, MBAA labeled metabolites can be fragmented

  17. Development of versatile isotopic labeling reagents for profiling the amine submetabolome by liquid chromatography–mass spectrometry

    International Nuclear Information System (INIS)

    Highlights: • Two new reagents were developed for chemical isotope labeling mass spectrometry (MS). • They could be used to label amine-containing metabolites in a metabolomic sample. • The labeled metabolites could be detected with much improved sensitivity in MS. • One of the reagents could also help generate useful MS/MS spectra for structural analysis. • These reagents should be useful for quantitative metabolomics. - Abstract: Metabolomic profiling involves relative quantification of metabolites in comparative samples and identification of the significant metabolites that differentiate different groups (e.g., diseased vs. controls). Chemical isotope labeling (CIL) liquid chromatography–mass spectrometry (LC–MS) is an enabling technique that can provide improved metabolome coverage and metabolite quantification. However, chemical identification of labeled metabolites can still be a challenge. In this work, a new set of isotopic labeling reagents offering versatile properties to enhance both detection and identification are described. They were prepared by a glycine molecule (or its isotopic counterpart) and an aromatic acid with varying structures through a simple three-step synthesis route. In addition to relatively low costs of synthesizing the reagents, this reaction route allows adjusting reagent property in accordance with the desired application objective. To date, two isotopic reagents, 4-dimethylaminobenzoylamido acetic acid N-hydroxylsuccinimide ester (DBAA-NHS) and 4-methoxybenzoylamido acetic acid N-hydroxylsuccinimide ester (MBAA-NHS), for labeling the amine-containing metabolites (i.e., amine submetabolome) have been synthesized. The labeling conditions and the related LC–MS method have been optimized. We demonstrate that DBAA labeling can increase the metabolite detectability because of the presence of an electrospray ionization (ESI)-active dimethylaminobenzoyl group. On the other hand, MBAA labeled metabolites can be fragmented

  18. Coat-nitrocarburizing using triazine polymer reagent

    Science.gov (United States)

    Wen, Li.; Shi, J.; Smith, R. W.

    1993-02-01

    A chemico-thermal treatment process, coat-nitrocarburizing, has been developed for use on iron and steel. The process consists of treating the workpiece with a coat that forms on the surface from the gaseous products of sublimation and decomposition of a triazine polymer reagent in a closed volume. The process can be used over a wide range of temperatures, either below the eutectoid transformation temperature in the Fe-N-C system for low-temperature nitrocarburizing, or above this temperature for hightemperature nitrocarburizing in different applications. The process is very simple, easily controlled, and is economic. In addition, it is a nonpolluting process, unlike conventional chemico-thermal treatment processes that discharge harmful gases into the atmosphere.

  19. Perfluorocarbon-soluble Catalysts and Reagent

    Energy Technology Data Exchange (ETDEWEB)

    Montanari, F. [Milan Univ. (Italy). Dipt. di Chimica organica e industriale; Pozzi, G.; Quici, S. [CNR, Milan (Italy). Centro sulla sintesi e stereochimica di speciali sistemi organici

    1998-05-01

    The new phase-separation and immobilization technique known as FBS (Fluorous Biphase System) is rapidly becoming popular among researchers, both in industry and in academia. The FBS approach takes advantage of the immiscibility of perfluorocarbons with most organic solvents and water. This allows the easy recover and recycle of catalysts and reagents selectively soluble perfluorocarbons. The present review describes the major results obtained in this field up to 1997. [Italiano] La nuova tecnica di immobilizzazione e separazione denominata FBS (Fluorous Biphase System) sta attirando l`interesse di numerosi gruppi di ricerca, sia in ambito industriale sia in quello accademico. Nei sistemi FBS l`immiscibilita` dei fluidi perfluorurati con la maggior parte dei solventi organici e con l`acqua consente il facile recupero e riciclo di catalizzatori e reagenti selettivemente solubili nella fase fluorurata. Questa rassegna prende in esame i principali risultati finora conseguiti in questo campo.

  20. Supramolecular Tectonics for Enzyme-like Reagents

    Institute of Scientific and Technical Information of China (English)

    MAO; LuYuan

    2001-01-01

    The enzyme-likes and bioactive species were closely related with the life phenomena and served as the reagent of bioassy1,2. In present works, the flow cytometry (FCM) and rapid-scanning stopped-flow (RSSF) spectroscopy combine with the stopped-flow difference UV/Vis spectra, FT-IR and other methods of assay, being used to study the biomimetic reaction and enzyme mimic. Based on catalytic kinetics of enzyme reaction3,4, the reaction mechanisms of the enzyme-likes had been studied and some new methods of kinetic determination were proposed. The study and methods not only provided the basic theoretical models for the life science, but also widened the application fields of biomimetic and analytical chemistry. The main contents of our works and the supramolecular models can be described as follows:  ……

  1. Inactivation and stability of viral diagnostic reagents treated by gamma radiation.

    Science.gov (United States)

    White, L A; Freeman, C Y; Hall, H E; Forrester, B D

    1990-10-01

    The objective of this study was to apply the pertinent findings from gamma inactivation of virus infectivity to the production of high quality diagnostic reagents. A Gammacell 220 (Atomic Energy of Canada, Ltd., Ottawa, Canada) was used to subject 38 viruses grown in either susceptible tissue cultures or embryonated chicken eggs to various doses of gamma radiation from a cobalt-60 source. The radiation required to reduce viral infectivity was 0.42 to 3.7 megarads (Mrad). The effect of gamma treatment on the antigenic reactivity of reagents for the complement fixation (CF), hemagglutination (HA) and neuraminadase assays was determined. Influenza antigens inactivated with 1.7 Mrad displayed comparable potency, sensitivity, specificity and stability to those inactivated by standard procedures with beta-propiolactone (BPL). Significant inactivation of influenza N1 and B neuraminidase occurred with greater than 2.4 Mrad radiation at temperatures above 4 degrees C. All 38 viruses were inactivated, and CF or HA antigens were prepared successfully. Antigenic potency remained stable with all antigens for 3 years and with 83% after 5 years storage. Influenza HA antigens evaluated after 9 years of storage demonstrated 86% stability. Gamma radiation is safer than chemical inactivation procedures and is reliable and effective replacement for BPL in preparing diagnostic reagents.

  2. Inactivation and stability of viral diagnostic reagents treated by gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    White, L.A.; Freeman, C.Y.; Hall, H.E.; Forrester, B.D. (Department of Health and Human Services, Atlanta, GA (USA))

    1990-10-01

    The objective of this study was to apply the pertinent findings from gamma inactivation of virus infectivity to the production of high quality diagnostic reagents. A Gammacell 220 was used to subject 38 viruses grown in either susceptible tissue cultures or embryonated chicken eggs to various doses of gamma radiation from a cobalt-60 source. The radiation required to reduce viral infectivity was 0.42 to 3.7 megarads (Mrad). The effect of gamma treatment on the antigenic reactivity of reagents for the complement fixation (CF), hemagglutination (HA) and neuraminadase assays was determined. Influenza antigens inactivated with 1.7 Mrad displayed comparable potency, sensitivity, specificity and stability to those inactivated by standard procedures with beta-propiolactone (BPL). Significant inactivation of influenza N1 and B neuraminidase occurred with >2.4 Mrad radiation at temperatures above 4{sup 0}C. All 38 viruses were inactivated, and CF or HA antigens were prepared successfully. Antigenic potency remained stable with all antigens for 3 years and with 83% after 5 years storage. Influenza HA antigens evaluated after 9 years of storage demonstrated 86% stability. Gamma radiation is safer than chemical inactivation procedures and is a reliable and effective replacement for BPL in preparing diagnostic reagents. (author).

  3. Use of Competition Kinetics with Fast Reactions of Grignard Reagents

    DEFF Research Database (Denmark)

    Holm, Torkil

    2000-01-01

    Competition kinetics are useful for estimation of the reactivities of Grignard reagents if the reaction rates do not differ widely and if exact rates are not needed. If the rate of mixing is slower than the rate of reaction the ratios between the rates of fast and slow reagents are found to be to...

  4. Investigation of Chemiluminescence with Electrogenerated Reagents and Its Analytical Application

    Institute of Scientific and Technical Information of China (English)

    章竹君; 李保新; 郑行望

    2003-01-01

    In this paper, studies on chemiluminescence (CL) systems with electrogenerated reagents, including BrO-, ClO-, Br2, [Cu-(HIO6)2]5-, H2O2, Mn3+, Co3+ and Ag2+, are described.The analytical applications of the CL system with electrogenerated reagents are reviewed.

  5. 21 CFR 866.3520 - Rubeola (measles) virus serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rubeola (measles) virus serological reagents. 866... Rubeola (measles) virus serological reagents. (a) Identification. Rubeola (measles) virus serological... to rubeola virus in serum. The identification aids in the diagnosis of measles and...

  6. Synthesis and characterization of zwitterionic carbon dioxide fixing reagents

    DEFF Research Database (Denmark)

    Mikkelsen, Mette; Jørgensen, Mikkel; Krebs, Frederik C

    2010-01-01

    The synthesis of three amine-based carbon dioxide fixing reagents is presented. The reagents were designed so that they would be able to bind CO2 reversibly through the formation of the well known carbamates that was stabilized through forming a zwitterion. CO2 fixing experiments were performed...

  7. 21 CFR 864.4020 - Analyte specific reagents.

    Science.gov (United States)

    2010-04-01

    ... reagents. (a) Identification. Analyte specific reagents (ASR's) are antibodies, both polyclonal and... application for identification and quantification of an individual chemical substance or ligand in biological... as a component in a test intended for use in donor screening for conditions for which FDA...

  8. Novel Substitution Reactions of 5-(4-Nitrophenyl)-10,15,20-triphenyl porphyrin with Nucleophilic Reagents

    Institute of Scientific and Technical Information of China (English)

    SHAO,Zhi-Jun; CHEN,Zhang-Ping; OUYANG,Yan; ZENG,Dan-Li

    2004-01-01

    @@ Substitution reactions of 5-(4-nitrophenyl)-10,15,20-triphenylporphyrin (1)and its Ni(Ⅱ) complexe 2 with different nucleophilic reagents were studied for preparing asymmetric porphyrin. The reaction products are different with the nucleophilic reagents changing. Diporphyrin (3) was obtained when compound 1 reacted with sodium phenoxide or diphenoxide ion in DMF solution. Whereas the nitro group was reduced and 5-(4-amino-phenyl)-10,15,20-triphenylporphyrinato Nickel(Ⅱ) (4) was achieved when compound 2 reacted with above nuleophilic reagents in the same condition. The reductive product 5-(4-aminophenyl)-10,15,20-triphenylporphyrin (5) was also achieved when 1 reacted with mercaptoethanol or thiophene and lithium hydroxide. While the nitro group was substituted by cyanide anion and 5-(4-nitrilephenyl)-10,15,20-triphenylporphyrin (6) was achieved when 1 reacted with sodium cyanide.

  9. 21 CFR 866.3370 - Mycobacterium tuberculosis immunofluorescent reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mycobacterium tuberculosis immunofluorescent... § 866.3370 Mycobacterium tuberculosis immunofluorescent reagents. (a) Identification. Mycobacterium... used to identify Mycobacterium tuberculosis directly from clinical specimens. The identification...

  10. The Clinical Proteomic Technologies for Cancer | Reagent Opportunities

    Science.gov (United States)

    An objective of the Reagents and Resources component of NCI's Clinical Proteomic Technologies for Cancer Initiative is to generate highly characterized monoclonal antibodies to human proteins associated with cancer.

  11. Effect of polyamine reagents on exchange capacity in ion exchangers

    Science.gov (United States)

    Petrova, T. I.; Dyachenko, F. V.; Bogatyreva, Yu. V.; Borodastov, A. K.; Ershova, I. S.

    2016-05-01

    Effect of compounds involved in complex reagents is described using Helamin 906H reagent as an example. The working exchange capacity of KU-2-8chs cation exchanger in hydrogen form and Amberlite IRA 900Cl anion exchanger in OH form remained almost unchanged when they were used repeatedly to purify water that contained Helamin 906H reagent; in addition, this capacity was the same upon filtration of water that did not contain this reagent. Leakage of total organic carbon was observed earlier than that of calcium ions upon filtration of the solution through the cation exchanger layer. The test results obtained in industrial conditions indicated that using H-OH filters to purify turbine condensate enables the decrease of the concentration of organic and other impurities therein.

  12. Copper-catalyzed arylation of alkyl halides with arylaluminum reagents

    Directory of Open Access Journals (Sweden)

    Bijay Shrestha

    2015-12-01

    Full Text Available We report a Cu-catalyzed coupling between triarylaluminum reagents and alkyl halides to form arylalkanes. The reaction proceeds in the presence of N,N,N’,N’-tetramethyl-o-phenylenediamine (NN-1 as a ligand in combination with CuI as a catalyst. This catalyst system enables the coupling of primary alkyl iodides and bromides with electron-neutral and electron-rich triarylaluminum reagents and affords the cross-coupled products in good to excellent yields.

  13. Evaluation of novel derivatisation reagents for the analysis of oxysterols

    Energy Technology Data Exchange (ETDEWEB)

    Crick, Peter J., E-mail: p.j.crick@swansea.ac.uk [Institute of Mass Spectrometry, College of Medicine, Swansea University, Singleton Park, Swansea SA2 8PP (United Kingdom); Aponte, Jennifer; Bentley, T. William [Institute of Mass Spectrometry, College of Medicine, Swansea University, Singleton Park, Swansea SA2 8PP (United Kingdom); Matthews, Ian [College of Engineering, Swansea University, Singleton Park, Swansea SA2 8PP (United Kingdom); Wang, Yuqin [Institute of Mass Spectrometry, College of Medicine, Swansea University, Singleton Park, Swansea SA2 8PP (United Kingdom); Griffiths, William J., E-mail: w.j.griffiths@swansea.ac.uk [Institute of Mass Spectrometry, College of Medicine, Swansea University, Singleton Park, Swansea SA2 8PP (United Kingdom)

    2014-04-11

    Graphical abstract: - Highlights: • New derivatisation reagents for LC–MS analysis of oxysterols. • New reagents based on Girard P give high ion-currents and informative LC–MS{sup n} spectra. • Permanent charge is vital for efficient MS{sup n} fragmentation. • New reagents offer greater scope for incorporation of isotope labels. - Abstract: Oxysterols are oxidised forms of cholesterol that are intermediates in the synthesis of bile acids and steroid hormones. They are also ligands to nuclear and G protein-coupled receptors. Analysis of oxysterols in biological systems is challenging due to their low abundance coupled with their lack of a strong chromophore and poor ionisation characteristics in mass spectrometry (MS). We have previously used enzyme-assisted derivatisation for sterol analysis (EADSA) to identify and quantitate oxysterols in biological samples. This technique relies on tagging sterols with the Girard P reagent to introduce a charged quaternary ammonium group. Here, we have compared several modified Girard-like reagents and show that the permanent charge is vital for efficient MS{sup n} fragmentation. However, we find that the reagent can be extended to include sites for potential stable isotope labels without a loss of performance.

  14. Synthesis of Glycosyl Amides Using Selenocarboxylates as Traceless Reagents for Amide Bond Formation.

    Science.gov (United States)

    Silva, Luana; Affeldt, Ricardo F; Lüdtke, Diogo S

    2016-07-01

    Carbohydrate-derived amides were successfully prepared in good yields from a broad range of substrates, including furanosyl and pyranosyl derivatives. The methodology successfully relied on the in situ generation of lithium selenocarboxylates from Se/LiEt3BH and acyl chlorides or carboxylic acids and their reaction with sugar azides. A key aspect of the present protocol is that we start from elemental selenium; isolation and handling of all reactive and sensitive selenium-containing intermediates is avoided, therefore providing the selenocarboxylate the status of a traceless reagent. PMID:27275515

  15. POLYMER-SUPPORTED GRIGNARD REAGENT AND ITS USE IN THE FUNCTIONALIZATION OF POLYMER

    Institute of Scientific and Technical Information of China (English)

    WANG Mingtai; ZONG Huijuan

    1995-01-01

    Polymeric Grignard Reagent (PGR) based on the chloromethylated poly(ST-co-DVB) resin has been prepared by means of anthracene-magnesium complex in THF (Anth-Mg-THF),and polymer matrix with long polymethylene spacer was synthesized via the coupling reaction between PGR and α, ω-dibromoalkanes. Based on the studies of factors affecting the coupling, such as catalyst,reaction time,the length of spacer etc. ,this paper offers the optimal reaction conditions and three typical experiment procedures. The mechanism for the formation and coupling reaction of PGR are also discussed.

  16. ATP生物发光测定试剂研究进展%Reserach progress on ATP bioluminescence reagent

    Institute of Scientific and Technical Information of China (English)

    吴慧清; 李程思; 吴清平; 张菊梅

    2012-01-01

    Firefly luciferase is the key component of ATP bioluminescence reagent, gained from firefly lantern throuh extraction and purification or preparation through genetic engineering, the performance of ATP bioluminescence reagent was decided by the vitality and the purity of firefly luciferase.Up to now, many present advanced technology were applied on preparation the reagent such as genetic engineering, ATP amplification device, stabilization technology of luciferase protein and luminescence, and so on.Now research focus on improving detection sensitivity and luminescence performance of the ATP bioluminescence reagents, further raising the adaptability of ATP bioluminescence reagents.%萤火虫荧光素酶是ATP生物发光试剂的关键组成部分,可通过萤火虫尾提取纯化或基因工程技术制备,酶的活力和纯度决定了ATP生物发光试剂的性能.迄今许多先进技术在ATP生物发光试剂的制备中均有应用,包括酶基因工程改造技术、ATP循环的酶法放大技术、荧光素酶蛋白的活力及发光稳定技术,特异的细胞ATP提取技术等.ATP生物发光试剂的研究焦点主要集中在提高发光试剂的检测灵敏度和性能、增加产品的适应性等方面.

  17. Resolution of 1- and 2-naphthylmethoxyacetic acids, NMR reagents for absolute configuration determination, by use of L-phenylalaninol.

    Science.gov (United States)

    Arita, Shoko; Yabuuchi, Tetsuya; Kusumi, Takenori

    2003-08-01

    Racemic 1- and 2-naphthylmethoxyacetic acids (1NMA and 2NMA), the chiral anisotropic reagents used for absolute configuration determination of chiral secondary alcohols and primary amines, were conveniently resolved to enantiomers (>99% ee) by condensation with L-phenylalaninol (2-amino-3-phenylpropanol), chromatographic separation of the diastereomers, and hydrolysis. This method enables large-scale preparation of enantiomeric 1NMA and 2NMA. PMID:12840826

  18. An oral Mycobacterium bovis BCG vaccine for wildlife produced in the absence of animal-derived reagents.

    Science.gov (United States)

    Cross, Martin L; Lambeth, Matthew R; Aldwell, Frank E

    2009-09-01

    Cultures of Mycobacterium bovis BCG, comprising predominantly single-cell bacilli, were prepared in broth without animal-derived reagents. When formulated into a vegetable-derived lipid matrix, the vaccine was stable in vitro and was immunogenic in vivo upon feeding it to mice. This formulation could be useful for oral vaccination of wildlife against tuberculosis, where concern over transmissible prions may preclude the field use of vaccines containing animal products.

  19. Treatment of laundrette wastewater using Starbon and Fenton's reagent.

    Science.gov (United States)

    Tony, Maha A; Parker, Helen L; Clark, James H

    2016-09-18

    The use of grey water for a variety of purposes is gaining increased popularity as a means of preserving scarce freshwater resources. In this work, catalytic oxidation over Fenton's reagent and adsorption techniques using Starbon (mesoporous material derived from polysaccharides) has been applied. These novel techniques are used as an alternative to already studied treatments of grey water such as filtration and/or biological processes. In this study, grey water, collected from a commercial laundrette, has been used. Treatment efficiency was determined by changes in the chemical oxygen demand (COD) of the grey water. Experiments using Fenton's reagent at optimum conditions of Fe(3+) = 40 mg L(-1); H2O2 = 400 mg L(-1) and pH 3 were very successful, resulting in a 95% COD removal after 15 min. Treatment with Starbon adsorption was also effective, reaching up to 81% COD removal at pH 3 within 1 h. The combined treatment with Fenton's reagent and Starbon resulted in a 93% COD removal at a significantly reduced concentration of Fenton's reagent compared to the treatment with solo Fenton's reagent. This lower chemical dose has the advantage of reducing costs and lowering sludge generation. PMID:27336472

  20. Preparation of the radioactive source core of iodine-125 seed

    Institute of Scientific and Technical Information of China (English)

    HE Jiaheng; JIANG Lin; LI Xingliang; ZHONG Wenbin; WANG Jing; MA Zongping; JIAN Yuan

    2009-01-01

    ption, so as to optimize the process for preparing 125I core of the seed. The parameters investigated include kind and concentration of halogenation reagent, halogenation time, adsorption time, pH and carrier iodine quantity.

  1. Comparing viral metagenomics methods using a highly multiplexed human viral pathogens reagent.

    Science.gov (United States)

    Li, Linlin; Deng, Xutao; Mee, Edward T; Collot-Teixeira, Sophie; Anderson, Rob; Schepelmann, Silke; Minor, Philip D; Delwart, Eric

    2015-03-01

    Unbiased metagenomic sequencing holds significant potential as a diagnostic tool for the simultaneous detection of any previously genetically described viral nucleic acids in clinical samples. Viral genome sequences can also inform on likely phenotypes including drug susceptibility or neutralization serotypes. In this study, different variables of the laboratory methods often used to generate viral metagenomics libraries were compared for their abilities to detect multiple viruses and generate full genome coverage. A biological reagent consisting of 25 different human RNA and DNA viral pathogens was used to estimate the effect of filtration and nuclease digestion, DNA/RNA extraction methods, pre-amplification and the use of different library preparation kits on the detection of viral nucleic acids. Filtration and nuclease treatment led to slight decreases in the percentage of viral sequence reads and number of viruses detected. For nucleic acid extractions silica spin columns improved viral sequence recovery relative to magnetic beads and Trizol extraction. Pre-amplification using random RT-PCR while generating more viral sequence reads resulted in detection of fewer viruses, more overlapping sequences, and lower genome coverage. The ScriptSeq library preparation method retrieved more viruses and a greater fraction of their genomes than the TruSeq and Nextera methods. Viral metagenomics sequencing was able to simultaneously detect up to 22 different viruses in the biological reagent analyzed including all those detected by qPCR. Further optimization will be required for the detection of viruses in biologically more complex samples such as tissues, blood, or feces.

  2. Elution of lead from vermiculite with environmentally benign reagents

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The elution of lead from vermiculite was investigated by using a novel biodegradable chelating reagent, L-asparagic-N,N-diacetic acid (ASDA) and water soluble depolymerized pectic acid and comparing with a conventional chelating reagent, EDTA, as well as acetic acid. The influences of the reagent concentration, equilibrium pH and the suspension contact time on Pb extraction were examined. It is concluded that the acetic acid is not effective for Pb removal in any case due to its weak complexing ability with Pb. Although Pb is easier to be released by EDTA with stoichiometric amount, it is by no means the preferable alternative for the purpose because of its low biodegradability. On the other hand, ASDA and depolymerized pectic acid have the potential application because they are not only effective for Pb elution but also environmentally friendly.

  3. Method of producing a reagent for treating drilling muds

    Energy Technology Data Exchange (ETDEWEB)

    Khariv, I.Yu.

    1982-01-01

    A method is proposed for obtaining a reagent for treating drilling muds by hydrolysis of the polymer of the acryl series at 95-100/sup 0/C. In order to increase the capacity of the reagent to reduce viscosity and water output, and to increase the flocculating effect of the solution, the acryl polymer used is polyacryl nitrile, while hydrolysis is done in an alkali solution of sodium or potassium humates with the following ratio of components, % by mass: polyacryl nitrile 5.0-20.0, alkali solution of sodium or potassium humates the rest.

  4. 壳聚糖-g-N.羧甲基-二(2-苯并眯唑)-1,2-乙二醇的制备及其性能%Preparation of Chitosan-g-N-carboxymethyl-bi (2-benzoimidazole)-1,2-ethandiol Reagent and Its Characters

    Institute of Scientific and Technical Information of China (English)

    曾涵; 刘丛; 郁倩

    2009-01-01

    Small molecule reagent named bi(2-benzoimidazole)-1 ,2-ethandiol chemicaly modified links with natural pol-ymer-chitosan by grafting polymerization with 2-bromoacetic acid as raw material. Its structure and physical, chemical characters have been measured by ~1H NMR,IR,XRD and thermal analysis. Adsorption tests of grafting polymers for metal ions such as:Cd~(2+),CrO_4~(2-),Fe~(3+),Cu~(2+),Pb~(2+) on grafling polymer have been determined with EDTA complex titration; The antibacterial activity of grafting polymer has been examined against a series of test microorganism by quantitative suspension method; corrosion inhibition efficiency of synthesized polymers in certain erosion medium for N80 steel panel has been measured by weight-loss method. Results from experiments indicate that small molecule compound' s thermal stability is strengthened with its grafting with natural polymer-chitosan and grafting polymerization adds to its solubility in acid system. Its adsorption for metal ions could be retained at certain level within a wide temperature range and its antibacterial efficacy is enhanced, decreasing minimal inhibition criteria ( MIC). Inhibition of polymer to metal erosion can be retained according to coordination of BBIE and CIS.%以2-溴乙酸、壳聚塘、二(2-苯并咪唑)-1,2-乙二醇为原料,利用接枝作用将化学修饰后的小分子药物二(2-苯并咪唑)-1,2-乙二醇连接在天然高分子壳聚糖(CTS)上.并以~1H NMR,IR,热分析及XRD等方法对其结构进行表征并研究接枝聚合物的理化性质.本文采用络合滴定法测定了接枝聚合物对一系列重金属离子的吸附作用;采用震荡法进行悬菌定量杀菌实验;还以经典的静态失重法研究了合成的聚合物在腐蚀介质中对N80钢片腐蚀的抑制作用.结果表明:小分子药物二(2-苯并咪唑)-1,2-乙二醇在接枝到天然高分子壳聚糖后热稳定性提高,在酸中具有良好的溶解度,对金属离子吸附能力在一个

  5. Deflavination of flavo-oxidases by nucleophilic reagents

    NARCIS (Netherlands)

    Zlateva, Theodora; Boteva, Raina; Filippi, Bruno; Veenhuis, Marten; Klei, Ida J. van der

    2001-01-01

    Using spectroscopic techniques we studied the effect of the nucleophilic reagents cyanide, cyanate and thiocyanate on three flavo-oxidases namely alcohol oxidase (AO), glucose oxidase (GOX) and D-amino acid oxidase (DAOX). All three ions, added at concentrations in the mM range, caused release of th

  6. Improved amine spray reagent for the detection of sugars

    NARCIS (Netherlands)

    Niemann, G.J.

    1979-01-01

    In the course of our investigations on naturally occurring flavonoid glycosides, the sugars obtained after acid hydrolysis were mainly analysed by gas-liquid chromatography and/or paper chromatography, using p-anisidine phosphate as the spray reagent. Often only very small amounts of the isolated co

  7. Toward a dry reagent immunoassay of progesterone in bovine milk

    NARCIS (Netherlands)

    Posthuma-Trumpie, Geertruida Afina

    2008-01-01

    This thesis is aimed at the development of a dry reagent immunoassay of progesterone in cow's milk. Progesterone is a steroid hormone and regulates ovulation in female mammals. The concentration of progesterone in blood and in milk is in accordance with the reproductive cycle of the individual femal

  8. Improvement in carbofuran degradation by different Fenton's reagent dosing processes.

    Science.gov (United States)

    Ma, Ying-Shih

    2011-11-01

    Attempts were made in this study to examine the efficiency of Fenton's reagent with different dosing processes and H(2)O(2) and Fe(2+) concentrations for the treatment of carbofuran wastewater. Carbofuran degradation, total organic carbon (TOC) removal and H(2)O(2) consumption were determined during the experiments. Increases in H(2)O(2) and Fe(2+) concentrations led to an increase in the degradation of carbofuran. Almost 100% of carbofuran could be degraded at pH 3, 120 mg L(-1) H(2)O(2), 24 mg L(-1) Fe(2+) and 30 minutes reaction time; removals of TOC were among 48.8%-53.3% under different dosing processes. A continuous dosing process was beneficial to improve the removal of TOC by Fenton's reagent. Rate constants of carbofuran degradation could be calculated by the first-order kinetics; increase in the Fenton's reagent generally increased the rate constants. Gas chromatography-mass spectrometry analysis found five degradation products by hydroxyl radicals attack. Thus, this study might offer an effective dosing way for carbofuran wastewater treatment by Fenton's reagent.

  9. 21 CFR 866.3240 - Equine encephalomyelitis virus serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Equine encephalomyelitis virus serological reagents. 866.3240 Section 866.3240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND... as mosquitos and ticks, and may cause encephalitis (inflammation of the brain), rash, acute...

  10. 21 CFR 866.3145 - Coxsackievirus serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Coxsackievirus serological reagents. 866.3145 Section 866.3145 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... produce a variety of infections, including common colds, meningitis (inflammation of brain and spinal...

  11. 21 CFR 866.3205 - Echovirus serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Echovirus serological reagents. 866.3205 Section 866.3205 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... caused by these viruses. Echoviruses cause illnesses such as meningitis (inflammation of the brain...

  12. 21 CFR 866.3415 - Pseudomonas spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Pseudomonas spp. serological reagents. 866.3415 Section 866.3415 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES..., abscesses, and meningitis (inflammation of brain membranes). Pseudomonas pseudomallei causes melioidosis,...

  13. 21 CFR 866.3270 - Flavobacterium spp. serological reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Flavobacterium spp. serological reagents. 866.3270 Section 866.3270 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... meningitis (inflammation of the membranes of the brain) and is usually attributable to contaminated...

  14. Synthesis of Thioacridine Derivatives Using Lawesson’s Reagent

    OpenAIRE

    Palla Mahesh; B.Dilip Kumar; B. Rama Devi; Murthy, Y. L. N.

    2015-01-01

    The synthesis of thioacridine derivatives (5a-j) have been achieved by the reaction of acridines (4a-j) with Lawesson’s reagent in toluene under refluxing conditions to yield products in high yields. The yields of the products are promising and the products are characterized by advanced spectroscopic studies.

  15. Methods and reagents. Reducing background colonies with positive selection vectors.

    Science.gov (United States)

    Hengen, P N

    1997-03-01

    Methods and reagents is a unique monthly column that highlights current discussions in the newsgroup bionet.molbio.methds-reagnts, available on the Internet. This month's column discusses the pros and cons of eliminating unwanted background colonies by using the positive selection vector pZErO. For details on how to partake in the newsgroup, see the accompanying box. PMID:9066262

  16. MINERAL-SURFACTANT INTERACTIONS FOR MINIMUM REAGENTS PRECIPITATION AND ADSORPTION FOR IMPROVED OIL RECOVERY

    Energy Technology Data Exchange (ETDEWEB)

    P. Somasundaran

    2006-04-30

    During this reporting period, further fundamental studies were conducted to understand the mechanism of the interactions between surfactants and minerals with the aim of minimizing chemical loss by adsorption. The effects of pH and mixing ratio on the chemical loss by adsorption were investigated. Some preliminary modeling work has been done towards the aim of developing a guide book to design optimal polymer/surfactant formula based on the understanding of adsorption and orientation of surfactants and their aggregates at solid/liquid interfaces. The study of adsorption of mixed system of n-dodecyl-{beta}-D-maltoside (DM) and dodecyl sulfonate (C{sub 12}SO{sub 3}Na) was continued during this period. Based on the adsorption results, the effects of pH and mixing ratio on reagent loss were quantitatively evaluated. Adsorption of dodecyl maltoside showed a maximum at certain mixing ratio at low pH (3{approx}5), while adsorption of dodecyl maltoside steadily decreased with the increase in C{sub 12}SO{sub 3}Na. Analytical ultracentrifuge technique was employed to study the micellization of DM/C{sub 12}SO{sub 3}Na mixtures. Compositional changes of the aggregates were observed the mixing ratio of the components. Surfactant mixture micellization affects the conformation and orientation of adsorption layer at mineral/water interface and thus the wettability and as a result, the oil release efficiency of the chemical flooding processes. A preliminary term, Reagent Loss Index (RLI), has been proposed to represent the adsorption of all the surfactants in a standardized framework for the development of the models. Previously reported adsorption data have been analyzed using the theoretical framework for the preparation of a guidebook to help optimization of chemical combinations and selection of reagent scheme for enhanced oil recovery.

  17. Insulin receptor activation and down-regulation by cationic lipid transfection reagents

    Directory of Open Access Journals (Sweden)

    Renström Ing-Marie

    2004-01-01

    Full Text Available Abstract Background Transfection agents comprised of cationic lipid preparations are widely used to transfect cell lines in culture with specific recombinant complementary DNA molecules. We have found that cells in culture are often resistant to stimulation with insulin subsequent to treatment with transfection agents such as LipofectAMINE 2000™ and FuGENE-6™. This is seen with a variety of different readouts, including insulin receptor signalling, glucose uptake into muscle cells, phosphorylation of protein kinase B and reporter gene activity in a variety of different cell types Results We now show that this is due in part to the fact that cationic lipid agents activate the insulin receptor fully during typical transfection experiments, which is then down-regulated. In attempts to circumvent this problem, we investigated the effects of increasing concentrations of LipofectAMINE 2000™ on insulin receptor phosphorylation in Chinese hamster ovary cells expressing the human insulin receptor. In addition, the efficiency of transfection that is supported by the same concentrations of transfection reagent was studied by using a green fluorescent protein construct. Our data indicate that considerably lower concentrations of LipofectAMINE 2000™ can be used than are recommended by the manufacturers. This is without sacrificing transfection efficiency markedly and avoids the problem of reducing insulin receptor expression in the cells. Conclusion Widely-used cationic lipid transfection reagents cause a state of insulin unresponsiveness in cells in culture due to fully activating and subsequently reducing the expression of the receptor in cells. This phenomenon can be avoided by reducing the concentration of reagent used in the transfection process.

  18. Development of versatile universal reagent immunoradiometric assay technique

    International Nuclear Information System (INIS)

    Immunoradiometric assays, which make use of labelled antibodies, potentially offer better sensitivity and specificity than do radioimmunoassays, which use labelled antigens. In addition, they can in principle be performed in a particularly convenient scheme wherein the same labelled reagent may be used for many different analytes - thus serving as a ''universal'' labelled reagent. Thus if the specific antibody for every analyte is raised in rabbits, and an anti-rabbit antibody is labelled, the latter may be added after the specific antibody to quantify the amount of specific antibody bound to analyte and thereby the amount of analyte present. The potential greater sensitivity and specificity of the immunoradiometric procedure, coupled with the potential convenience of the ''universal'' labelled reagent, might allow such immunoradiometric techniques to be used effectively in the study of communicable diseases in developing countries. Development of these procedures was the subject of this investigation. Many components of these procedures had to be explored and provisionally optimized, including coating of assay tubes with ''extraction'' antibody, immunological purification of antibodies, labelling of antibodies, and intermediate steps toward these goals. Applications were thereupon tested using those provisionally optimized components. The ''universal'' labelled reagent, a donkey anti-rabbit antiserum, was successfully used in the assay of TSH; however, cross reactions of the reagent with non-rabbit immunoglobulins and other materials present seriously limited the sensitivity of the method. Using conventional immunoradiometric procedures, circulating TB and amoebic antibodies could be detected in patients suffering from these diseases. Similarly, circulating antigens in the same patients could also be detected, but not with sufficient sensitivity and specificity to provide a reliable analytical system. Numerous improvements will be required before these techniques

  19. A community standard format for the representation of protein affinity reagents

    DEFF Research Database (Denmark)

    Gloriam, David Erik Immanuel; Orchard, Sandra; Bertinetti, Daniela;

    2010-01-01

    Protein affinity reagents (PARs), most commonly antibodies, are essential reagents for protein characterization in basic research, biotechnology, and diagnostics as well as the fastest growing class of therapeutics. Large numbers of PARs are available commercially; however, their quality is often...

  20. Novel synthetic method for ketones from substituted benzimidazolium salts and Grignard reagents

    Institute of Scientific and Technical Information of China (English)

    史真; 顾焕

    1996-01-01

    A new synthetic method of ketones from substituted benzimidazolium salts and Grignard reagents is reported. The influences of the various Grignard reagents on the yield of ketones and the mechanism are discussed.

  1. Controlling the Orientation and Alignment of Reagent Molecules by a Polarized Laser

    Institute of Scientific and Technical Information of China (English)

    丛书林; 韩克利; 楼南泉

    2003-01-01

    The expressions used for controlling the alignment and orientation of reagent molecules are derived. The problem to the control of the orientation and alignment of reagent molecules by the polarization direction and propagation direction of laser is discussed.

  2. A Bioorthogonal Reaction of N-Oxide and Boron Reagents.

    Science.gov (United States)

    Kim, Justin; Bertozzi, Carolyn R

    2015-12-21

    The development of bioorthogonal reactions has classically focused on bond-forming ligation reactions. In this report, we seek to expand the functional repertoire of such transformations by introducing a new bond-cleaving reaction between N-oxide and boron reagents. The reaction features a large dynamic range of reactivity, showcasing second-order rate constants as high as 2.3×10(3)  M(-1)  s(-1) using diboron reaction partners. Diboron reagents display minimal cell toxicity at millimolar concentrations, penetrate cell membranes, and effectively reduce N-oxides inside mammalian cells. This new bioorthogonal process based on miniscule components is thus well-suited for activating molecules within cells under chemical control. Furthermore, we demonstrate that the metabolic diversity of nature enables the use of naturally occurring functional groups that display inherent biocompatibility alongside abiotic components for organism-specific applications. PMID:26568479

  3. Microfluidic Synthesis of Rigid Nanovesicles for Hydrophilic Reagents Delivery**

    Science.gov (United States)

    Zhang, Lu; Feng, Qiang; Wang, Jiuling; Sun, Jiashu; Shi, Xinghua; Jiang, Xingyu

    2015-01-01

    We present a hollow-structured rigid nanovesicle (RNV) fabricated by a multi-stage microfluidic chip in one step, to effectively entrap various hydrophilic reagents inside, without complicated synthesis, extensive use of emulsifiers and stabilizers, and laborious purification procedures. The RNV contains a hollow water core, a rigid poly (lactic-co-glycolic acid) (PLGA) shell, and an outermost lipid layer. The formation mechanism of the RNV is investigated by dissipative particle dynamics (DPD) simulations. The entrapment efficiency of hydrophilic reagents such as calcein, rhodamine B and siRNA inside the hollow water core of RNV is ≈90 %. In comparison with the combination of free Dox and siRNA, RNV that co-encapsulate siRNA and doxorubicin (Dox) reveals a significantly enhanced anti-tumor effect for a multi-drug resistant tumor model. PMID:25704675

  4. Rapid transdermal bloodless and reagent-free malaria detection

    Science.gov (United States)

    Lukianova-Hleb, Ekaterina Y.; Campbell, Kelly M.; Constantinou, Pamela E.; Braam, Janet; Olson, John S.; Ware, Russell E.; Sullivan, David S.; Lapotko, Dmitri

    2014-02-01

    Successful diagnosis, screening, and elimination of malaria critically depend on rapid and sensitive detection of this dangerous infection, preferably transdermally and without sophisticated reagents or blood drawing. Such diagnostic methods are not currently available. Here we show that the high optical absorbance and nanosize of endogenous heme nanoparticles called hemozoin, a unique component of all blood-stage malaria parasites, generate a transient vapor nanobubble around hemozoin in response to a short and safe near-infrared picosecond laser pulse. The acoustic signals of these malaria-specific nanobubbles provided the first transdermal non-invasive and rapid detection of a malaria infection as low as 0.00034% in animals without using any reagents or drawing blood. These on-demand transient events have no analogs among current malaria markers and probes, can detect and screen malaria in seconds and can be realized as a compact, easy to use, inexpensive and safe field technology.

  5. Kalman filtering applied to a reagent feed system

    International Nuclear Information System (INIS)

    Using a Kalman filter solves a troublesome measurement noise problem and, at the same time, improves nuclear safety by detecting leaks to the process' feed tanks. To demonstrate how this technology of optimal estimation can be exploited, this article presents a systematic plan and example of how a Kalman filter was proven in industrial use on a reagent analyzer. A process to recycle uranium from spent fuel elements uses a reagent stream containing boron to dissolve the fuel. The boron is the neutron poison that prevents a nuclear chain reaction during the uranium dissolution. The purpose of the Kalman filter for this system is to reduce the uncertainty in the boron concentration measurement. The filter also provides incipient fault detection by estimating the unmeasured state of any unpoisoned solution, which would dilute the boron solution, entering the feed vessel

  6. Aminodifluorosulfinium Tetrafluoroborate Salts as Stable and Crystalline Deoxofluorinating Reagents

    OpenAIRE

    Beaulieu, Francis; Beauregard, Louis-Philippe; Courchesne, Gabriel; Couturier, Michel; LaFlamme, François; L’Heureux, Alexandre

    2009-01-01

    Aminodifluorosulfinium tetrafluoroborate salts were found to act as efficient deoxofluorinating reagents when promoted by an exogenous fluoride source and, in most cases, exhibited greater selectivity by providing less elimination byproduct as compared to DAST and Deoxo-Fluor. Aminodifluorosulfinium tetrafluoroborates are easy handled crystalline salts that show enhanced thermal stability over dialkylaminosulfur trifluorides, are storage-stable, and unlike DAST and Deoxo-Fluor do not react vi...

  7. Development of Ammonia Gas Sensor Using Optimized Organometallic Reagent

    OpenAIRE

    Aubrecht, J.; Kalvoda, L.

    2016-01-01

    Reliable, continuous, and spatially distributed monitoring of dangerous or irritating chemical substances belongs to standard functions of contemporary industrial and public security systems. Fiber-optic-based detection provides feasible platform to fulfill such aims. This paper deals with characterization of ammonia sensing elements based on multimode polysiloxane-clad silica-core optical fibers sensitized with 5-(4′-dioctylamino phenylimino) quinoline-8-1 cobalt bromide complex reagent immo...

  8. New reagents for detecting free radicals and oxidative stress.

    Science.gov (United States)

    Barzegar Amiri Olia, Mina; Schiesser, Carl H; Taylor, Michelle K

    2014-09-21

    Free radicals and oxidative stress play important roles in the deterioration of materials, and free radicals are important intermediates in many biological processes. The ability to detect these reactive species is a key step on the road to their understanding and ultimate control. This short review highlights recent progress in the development of reagents for the detection of free radicals and reactive oxygen species with broad application to materials science as well as biology.

  9. Reagent deposition for rapid multiplex pathogen identification in human blood culture samples

    DEFF Research Database (Denmark)

    Mogensen, Klaus Bo; Machado, Ana Manuel; Dufva, Martin

    2014-01-01

    -situ hybridization assay is used (PNA-FISH) for diagnosis of hospital acquired bacteria, such as staphylococcus aureus, enterococcus faecalis, E. coli, candida albicans etc. The test covers 90-95 % of the species by prevalence. It is based on a microscope slide format with inspection of the fluorescing bacteria...... viewed in a dual-color microscope configuration. The test takes 20-30 min to perform. In order to lower the cost of the test, rapid automated reagent deposition is needed. Here, ultrasonic spray coating of polyvinyl alcohol/PNA-probes on microscope glass slides is presented. Different wetting regimes...... are explored in order to control the spot profile from convex to concave. The spray coated test are compared with manually prepared tests to ensure that the same performance is obtained....

  10. Identification of mimotopes of Mycobacterium leprae as potential diagnostic reagents

    Directory of Open Access Journals (Sweden)

    Alban Silvana M

    2013-01-01

    Full Text Available Abstract Background An early diagnostic test for detecting infection in leprosy is fundamental for reducing patients’ sequelae. The currently used lepromin is not adequate for disease diagnosis and, so far, no antigen to be used in intradermoreaction has proved to be sensitive and specific for that purpose. Aiming at identifying new reagents to be used in skin tests, candidate antigens were investigated. Methods Random peptide phage display libraries were screened by using antibodies from leprosy patients in order to identify peptides as diagnostic reagents. Results Seven different phage clones were identified using purified antibodies pooled from sera of leprosy patients. When the clones were tested with serum samples by ELISA, three of them, 5A, 6A and 1B, allowed detecting a larger number of leprosy patients when compared to controls. The corresponding peptides expressed by selected phage clones were chemically synthesized. A pilot study was undertaken to assess the use of peptides in skin tests. The intradermal challenge with peptides in animals previously sensitized with Mycobacterium leprae induced a delayed-type hypersensitivity with peptide 5A (2/5 and peptide 1B (1/5. In positive controls, there was a 3/5 reactivity for lepromin and a 4/5 reactivity of the sensitized animals with soluble extract of M. leprae. Conclusions The preliminary data suggest that may be possible to develop reagents with diagnostic potential based on peptide mimotopes selected by phage display using polyclonal human antibodies.

  11. UV Decontamination of MDA Reagents for Single Cell Genomics

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Janey; Tighe, Damon; Sczyrba, Alexander; Malmatrom, Rex; Clingenpeel, Scott; Malfatti, Stephanie; Rinke, Christian; Wang, Zhong; Stepanauskas, Ramunas; Cheng, Jan-Fang; Woyke, Tanja

    2011-03-18

    Single cell genomics, the amplification and sequencing of genomes from single cells, can provide a glimpse into the genetic make-up and thus life style of the vast majority of uncultured microbial cells, making it an immensely powerful and increasingly popular tool. This is accomplished by use of multiple displacement amplification (MDA), which can generate billions of copies of a single bacterial genome producing microgram-range DNA required for shotgun sequencing. Here, we address a key challenge inherent to this approach and propose a solution for the improved recovery of single cell genomes. While DNA-free reagents for the amplification of a single cell genome are a prerequisite for successful single cell sequencing and analysis, DNA contamination has been detected in various reagents, which poses a considerable challenge. Our study demonstrates the effect of UV irradiation in efficient elimination of exogenous contaminant DNA found in MDA reagents, while maintaining Phi29 activity. Consequently, we also find that increased UV exposure to Phi29 does not adversely affect genome coverage of MDA amplified single cells. While additional challenges in single cell genomics remain to be resolved, the proposed methodology is relatively quick and simple and we believe that its application will be of high value for future single cell sequencing projects.

  12. Application of nuclear track microfilters to clarification of ultra pure chemical reagents

    International Nuclear Information System (INIS)

    A pilot study of the microfilter to clarify three kinds of chemical reagents (hydrogen peroxide, hydrochloric acid and a negative photoresist for developer)was carried out. They came up to the BVI and MOS standard of ultra pure chemical reagents. It was shown that the self-made nuclear track microfilters could be used in industrial production of ultra pure chemical reagents

  13. 21 CFR 864.9650 - Quality control kit for blood banking reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Quality control kit for blood banking reagents... Manufacture Blood and Blood Products § 864.9650 Quality control kit for blood banking reagents. (a) Identification. A quality control kit for blood banking reagents is a device that consists of sera,...

  14. 21 CFR 866.3720 - Streptococcus spp. exo-enzyme reagents.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Streptococcus spp. exo-enzyme reagents. 866.3720 Section 866.3720 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... spp. exo-enzyme reagents. (a) Identification. Streptococcus spp. exoenzyme reagents are devices...

  15. PERVAPORATION PROPERTIES OF PDMS MEMBRANES CURED WITH DIFFERENT CROSS-LINKING REAGENTS FOR ETHANOL CONCENTRATION FROM AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Xia Zhan; Ji-ding Li; Jun-qi Huang; Cui-xian Chen

    2009-01-01

    Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents, such as tetraethoxylsilane (TEOS), γ-aminopropyltriethoxylsilane (APTEOS), phenyltrimethoxylsilane (PTMOS) and octyltrimethoxylsilane (OTMOS) as well. The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents. The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investigated in detail. As temperature increased, the total flux of the four kinds of membranes all increased exponentially, and the separation factor followed a reversed order. The increase of thickness of PDMS layers depressed the total flux of composite membranes and had no obvious effect on selectivity of ethanol. It was found that the composite membrane cured by PTMOS showed much better separation performance compared with other membranes. A resistance-in-series model was used to investigate and estimate the overall mass transfer coefficients and boundary layer mass transfer coefficients of ethanol and water according to experimental results. The measured diffusivities of ethanol and water in PDMS membranes had a magnitude of 10-10 m2·s-1 and 10-11 m2·s-1 at 313.15 K, respectively.

  16. Poly(N-isopropylacrylamide Hydrogels for Storage and Delivery of Reagents to Paper-Based Analytical Devices

    Directory of Open Access Journals (Sweden)

    Haydn T. Mitchell

    2015-07-01

    Full Text Available The thermally responsive hydrogel N,N'-methylenebisacrylamide-cross-linked poly(N-isopropylacrylamide (PNIPAM was developed and evaluated as a reagent storage and delivery system for microfluidic paper-based analytical devices (microPADs. PNIPAM was shown to successfully deliver multiple solutions to microPADs in specific sequences or simultaneously in laminar-flow configuration and was found to be suitable for delivering four classes of reagents to the devices: Small molecules, enzymes, antibodies and DNA. PNIPAM was also able to successfully deliver a series of standard glucose solutions to microPADs equipped to perform a colorimetric glucose assay. The results of these tests were used to produce an external calibration curve, which in turn was used to determine the concentration of glucose in sample solutions. Finally, PNIPAM was used to store the enzyme horseradish peroxidase for 35 days under ambient conditions with no significant loss of activity. The combination of PNIPAM and microPADs may allow for more complex assays to be performed on paper-based devices, facilitate the preparation of external calibration curves in the field, and extend the shelf life of microPADs by stabilizing reagents in an easy-to-use format.

  17. Spontaneous formation of crystalline lithium molybdate from solid reagents at room temperature.

    Science.gov (United States)

    Yip, Thomas W S; Cussen, Edmund J; Wilson, Claire

    2010-01-14

    Lithium molybdate has been prepared by grinding LiOH x H(2)O with MoO(3) in air at room temperature. X-Ray powder diffraction data show that the formation of highly crystalline Li(2)MoO(4) is largely complete after 10 min. The phenacite structure of this material is the same as that derived from an X-ray diffraction study of a single crystal obtained from aqueous solution [R3; a = 14.3178(14) A, c = 9.5757(9) A]. Anhydrous lithium hydroxide fails to give the same reaction indicating that the water of crystallisation of LiOH x H(2)O is a vital component in this rapid synthesis. Differential scanning calorimetry measurements show that this reaction can proceed spontaneously between the two stable solid reagents at sub-ambient temperatures and is driven by the liberation of water from the crystalline lattice. Lithium molybdate prepared in this manner has significantly smaller and more regularly shaped particles than samples prepared by other synthetic methods. PMID:20023976

  18. Regioselective vicinal functionalization of unactivated alkenes with sulfonium iodate(i) reagents under metal-free conditions.

    Science.gov (United States)

    Rao, Dodla S; Reddy, Thurpu R; Babachary, Kalvacherla; Kashyap, Sudhir

    2016-08-21

    Metal-free, molecular iodine-free direct 1,2-difunctionalization of unactivated alkenes has been reported. The sulfonium iodate(i) reagent efficiently promoted the intermolecular vicinal iodo-functionalization of a diverse range of olefins in a stereo and regioselective manner. This method enables the divergent and straightforward preparation of synthetically useful functionalities; β-iodocarboxylates, β-iodohydrins, and β-iodoethers in a one-step process. Further interconversion of iodo-functionalized derivatives allows easy access to valuable synthetic intermediates en route to biologically active molecules. PMID:27430994

  19. Stability study for magnetic reagent assaying Hb and HbA1c

    Science.gov (United States)

    Hsieh, Wen-Pin; Chieh, J. J.; Yang, C. C.; Yang, S. Y.; Chen, Po-Yu; Huang, Yu-Hao; Hong, Y. W.; Horng, H. E.

    2013-01-01

    Reagents for magnetically labeled immunoassay on human Hb and human HbA1c have been synthesized. The reagents consist of Fe3O4 magnetic particles biofunctionalized with antibodies against Hb and HbA1c. It has been demonstrated that the reagents can be applied to quantitatively detect Hb and HbA1c by using immunomagnetic reduction assay. In addition to characterizing the assay properties, such as the standard curve and the low-detection limit, the stability of reagents is investigated. To do this, the temporal dependence of particle sizes and the bio-activity of reagents are monitored. The results show that the reagents are highly stable when stored at 2-8 °C. This means that the reagents synthesized in this work are promising for practical applications.

  20. Chemical interaction matrix between reagents in a Purex based process

    International Nuclear Information System (INIS)

    The United States Department of Energy (DOE) is the responsible entity for the disposal of the United States excess weapons grade plutonium. DOE selected a PUREX-based process to convert plutonium to low-enriched mixed oxide fuel for use in commercial nuclear power plants. To initiate this process in the United States, a Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF) is under construction and will be operated by Shaw AREVA MOX Services at the Savannah River Site. This facility will be licensed and regulated by the U.S. Nuclear Regulatory Commission (NRC). A PUREX process, similar to the one used at La Hague, France, will purify plutonium feedstock through solvent extraction. MFFF employs two major process operations to manufacture MOX fuel assemblies: (1) the Aqueous Polishing (AP) process to remove gallium and other impurities from plutonium feedstock and (2) the MOX fuel fabrication process (MP), which processes the oxides into pellets and manufactures the MOX fuel assemblies. The AP process consists of three major steps, dissolution, purification, and conversion, and is the center of the primary chemical processing. A study of process hazards controls has been initiated that will provide knowledge and protection against the chemical risks associated from mixing of reagents over the life time of the process. This paper presents a comprehensive chemical interaction matrix evaluation for the reagents used in the PUREX-based process. Chemical interaction matrix supplements the process conditions by providing a checklist of any potential inadvertent chemical reactions that may take place. It also identifies the chemical compatibility/incompatibility of the reagents if mixed by failure of operations or equipment within the process itself or mixed inadvertently by a technician in the laboratories. (authors)

  1. Sorption-reagent materials in liquid radioactive waste management

    International Nuclear Information System (INIS)

    One of the factors causing ecological problems at nuclear power units functioning is a large quantity of liquid radioactive waste (LRW) formed. LRW treatment and, in particular, removal of long-lived radionuclides comprise a serious problem from the ecological safety point of view. Good prospects of using selective sorbents and new sorption-reagent materials (SRM) developed in the Institute of Chemistry (Far East Department, Russian Academy of Sciences) in LRW management have been shown. Mechanism of sorption and factors affecting the strontium sorption efficiency has been analyzed with using SRM on the basis of inorganic hydroxides as an example. The principal difference between sorption-reagent systems (SRS) and other sorbents is that in the former, simultaneously with ion exchange reactions, takes place the formation of insoluble precipitate inside the sorbent porous matrix. This process results in increasing selectivity of strontium removal from high-salinity solutions. Such a mechanism combining ion exchange and chemical reactions (RIEX) enables one to benefit on precipitation process advantages (removal of radionuclide non-ionic forms) without excessive complication of the process technological setup at large. It is possible to use SRM successfully in the simplest and the best in economical terms dynamic regime (filtration of solution through a stationary sorbent layer). Application of SRM in real LRW management is considered on the example of pilot-plant tests of the sorption installation Barrier at the Russian Pacific Navy facilities and LRW decontamination unit used at decommissioned nuclear submarines. Technological setups and test results are presented. They show that use of sorption-reagent materials enables one to achieve LRW decontamination factors up to 106 and, therefore, provide a reliable decontamination of LRW from submarines to be decommissioned. (Author)

  2. REDUCING ODOR NUISANCE PRESSURE SEWERAGE SYSTEM USING FENTON'S REAGENT

    Directory of Open Access Journals (Sweden)

    Anna Nowicka

    2016-06-01

    Full Text Available The aim of this study was to propose a method to eliminate or reduce the occurrence of odor nuisance municipal sewage system located at one of the streets in Mława. In order to eliminate odor nuisance uses advanced oxidation processes. Studies aimed at determining the dose required reagents: PIX and hydrogen peroxide showed that the use of the lowest dose tested of 0,1 g of Fe2+/dm3 and 0,5 g H2O2/dm3 resulted in inhibition susceptibility wastewater rotting.

  3. Cine Substitution with Arylzinc Reagents: Scope and Mechanistic Studies.

    Science.gov (United States)

    Barroso, Santiago; Lemaire, Sébastien; Farina, Vittorio; Steib, Andreas K; Blanc, Romain; Knochel, Paul

    2016-04-01

    The unexpected ability of arylzinc reagents bearing electron-donating substituents to react in a Friedel-Crafts fashion (cine) with electrophiles like perpivaloylated glucoside bromide and benzhydryl bromides in competition with organometallic coupling (ipso) is shown. The stereoelectronic factors required to promote the cine reactivity versus the classical ipso, and the mechanism of this alternative pathway, have been investigated. The Wheland intermediate is deprotonated intramolecularly in a 1,2-shift but also in a longer-range shift, leaving in this case the C-Zn untouched. In the latter case, it is possible to take advantage of this result for further functionalization. PMID:26914598

  4. Synthesis of Heterocyclic Ring Systems Using Organometallic Reagents

    Institute of Scientific and Technical Information of China (English)

    Sameer Agarwal; Jan Kn(o)ll; Micha P. Krahl; Hans-Joachim Kn(o)lker

    2005-01-01

    @@ 1Introduction We developed novel synthetic routes to heterocyclic ring systems by using transition metal-mediated or -catalyzed reactions. A Lewis acid-promoted addition of the propargyl Grignard reagent 2 to the Schiff base 1 followed by a silvermediated oxidative cyclization of the homopropargylamine 3 provided the aryl-substituted pyrrole 4. Combined with a chemoselective hydrogenation of the pyrrole ring, this method has been applied to the total synthesis of the biologically active fused indolizidine alkaloids ( ± )-harmicine and ( ± )-crispine A[1]. See Fig. 1.

  5. Usage of fly ash as a coal desulphurization reagent

    Energy Technology Data Exchange (ETDEWEB)

    Yaman, S.; Kuecuekbayrak, S. [Istanbul Technical Univ. (Turkey). Chemical and Metallurgical Engineering Faculty

    1996-12-31

    This paper covers the direct usage of fly ash to remove sulphur from coal. Experiments were carried out on a high sulphur Turkish lignite. 5 g of fly ash was extracted in 200 ml of water under pressure and the dilute solution containing water extractable parts of fly ash was used as desulphurization reagent. Oxygen pressure was created over desulphurization medium during the extraction period by which dissolved oxygen was concentrated in the solution. Effects of temperature, partial pressure of oxygen, and time were investigated in the ranges of 403--498 K, 0.0--1.5 MPa and 15--90 min, respectively.

  6. First-in-man open clinical trial of a combined rdESAT-6 and rCFP-10 tuberculosis specific skin test reagent.

    Directory of Open Access Journals (Sweden)

    Winnie Bergstedt

    Full Text Available BACKGROUND: Tuberculin is still the only available skin test reagent for the diagnosis of mycobacterial infection. The product has a remarkable sensitivity, but poor specificity. Previous studies, including two human phase I clinical trials, have indicated that rdESAT-6 has a potential as an improved skin test reagent. Animal studies have shown that the sensitivity may be increased by inclusion of the genetically related CFP-10 antigen in the preparation without loosing specificity. METHODOLOGY: In this study a Lactococcus fermented, recombinant skin test reagent consisting of a 1ratio1 wt/wt of rdESAT-6 and CFP-10 was manufactured according to GMP standards and tested for the first time in 42 healthy adult volunteers. The two doses of 0.01 microg or 0.1 microg were injected intradermally by the Mantoux technique with 6 or 12 weeks interval. No serious adverse events and only mild adverse reactions were reported. The reagent elicited a positive skin test reaction after the first injection in one participant, who most likely was latently infected with M. tuberculosis as indicated by an appreciable IFN gamma response just below the Quantiferon(R cut-off level at the screening visit. None of the remaining participants in the four groups had any skin test reactions and sensitisation by the reagent could therefore be excluded. CONCLUSION: The investigational skin test reagent rdESAT-6 and CFP-10 appeared safe and non-sensitising in this first-in-man clinical trial in human volunteers and can now be tested in larger clinical trials involving individuals with latent M. tuberculosis infection or active TB disease. TRIAL REGISTRATION: ClinicalTrials.gov NCT00793702.

  7. Application of cyanuric chloride-based six new chiral derivatizing reagents having amino acids and amino acid amides as chiral auxiliaries for enantioresolution of proteinogenic amino acids by reversed-phase high-performance liquid chromatography.

    Science.gov (United States)

    Bhushan, Ravi; Dixit, Shuchi

    2012-04-01

    Six dichloro-s-triazine (DCT) reagents having L-Leu, D-Phg, L-Val, L-Met, L-Ala and L-Met-NH(2) as chiral auxiliaries in cyanuric chloride were introduced for enantioseparation of 13 proteinogenic amino acids. Four other DCTs and six monochloro-s-triazine (MCT) reagents having amino acid amides as chiral auxiliaries were also synthesized. These 16 chiral derivatizing reagents (CDRs) were used for synthesis of diastereomers of all the 13 analytes using microwave irradiation, which were resolved by reversed-phase high-performance liquid chromatography (RP-HPLC) using C18 column and gradient eluting mixture of aqueous TFA and acetonitrile with UV detection at 230 nm. It required only 60-90 s for derivatization using microwave irradiation. Better resolution and lower retention times were observed for the diastereomers prepared with CDRs having amino acids as chiral auxiliaries as compared to counterparts prepared with reagents having amino acid amides as chiral auxiliaries. As the best resolution of all the 13 analytes was observed for their diastereomers prepared using the DCT reagent having L-Leu as chiral auxiliary, this CDR was further employed for derivatization of Lys, Tyr, His and Arg followed by RP-HPLC analysis of resulting diastereomers. The results are discussed in light of acid and amide groups of chiral auxiliaries constituting CDRs, electronegativities of the atoms of achiral moieties constituting CDRs and hydrophobicities of side chains of amino acids constituting CDRs and analytes.

  8. POLYSTYRYLSULFONYL CHLORIDE:A USEFUL,REACTIVE INTERMEDIATE FOR PREPARATION OF FUNCTIONALIZED POLYMERS

    Institute of Scientific and Technical Information of China (English)

    HUANGWenqiang; HEBinglin

    1992-01-01

    This paper describes the preparation of polystyrylsulfonyl chloride, a reactive intermediate,and its application in syntheses of functionalized polymers which can be used in organic chemistry as polymeric reagents, supports and in controlled release systems.

  9. Luminescence Properties of Ce3 +-Doped Terbium Aluminum Garnet Phosphor Prepared with Use of Nanostructured Reagents

    Directory of Open Access Journals (Sweden)

    I.V. Berezovskaya

    2013-03-01

    Full Text Available The paper describes the synthesis of Ce3 +-doped terbium aluminum garnet (TAG phosphors with use of nanostructured oxides of aluminum and rare earths. Aluminum oxide nanoparticles were obtained by gaseous-disperse synthesis and characterized by X-ray diffraction, differential thermal analysis and scanning electron microscopy. It was shown that the Ce3 + ions in TAG exhibit the intense broad band emission with a maximum at about 563 nm and the quantum efficiency of luminescence of the Тb3(1 – xCe3xAl5O12 (х = 0.03 phosphor was found as high as 0.83.

  10. Evaluation of an automated urine chemistry reagent-strip analyzer.

    Science.gov (United States)

    Lott, J A; Johnson, W R; Luke, K E

    1995-01-01

    We evaluated the Miles Inc., Clinitek Atlas Automated Urine Chemistry Analyzer for 11 tests: bilirubin, color, glucose, ketones, leukocyte esterase, nitrite, occult blood, pH, protein, specific gravity, and urobilinogen. The instrument uses a roll of reagent strips affixed to a clear plastic support; urine specimens are automatically pipetted onto these strips. The instrument measures the pads' color using reflectance colorimetry. Specific gravity is measured using a fiberoptic refractive index method. Four hospitals participated in the evaluation, and tests were performed only on fresh urine samples. We found the instrument easy to use; it has walk-away capability with up to 40-specimen loading capacity plus spaces for STATs, calibrators and controls. We found good comparability with chemical tests and other nonreagent strip procedures, as well as good agreement with the Miles Inc. Clinitek 200+ urine chemistry analyzer and visual reading of the Miles Inc. Multistix Reagent Strips. The Clinitek Atlas is rugged and reliable, and is suitable for a high-volume urinalysis laboratory.

  11. Complexometric titrations: new reagents and concepts to overcome old limitations.

    Science.gov (United States)

    Zhai, Jingying; Bakker, Eric

    2016-07-21

    Chelators and end point indicators are the most important parts of complexometric titrations. The most widely used universal chelator ethylenediamine tetraacetic acid (EDTA) and its derivatives can strongly coordinate with different metal ions. Their limited selectivity often requires the use of masking agents, and the multiple pKa values of the chelators necessitate a careful adjustment of pH during the procedure. Real world requirements for pH independent, selective and sensitive chelators and indicators call for a new design of these reagents. New concepts and structures of chelators and indicators have indeed recently emerged. We present here recent developments on chelators and indicators for complexometric titrations. Many of these advances were made possible only recently by moving the titration from a homogeneous to a heterogeneous phase using a new class of chelators and indicators based on highly selective ionophores embedded in ion-selective nanosphere emulsions. In view of achieving titrations in situ by complete instrumental control, thin layer electrochemistry has recently been shown to be an attractive concept that replaces the traditional cumbersome titration protocol with a direct reagent free sensing tool. PMID:27272695

  12. Total Synthesis of Natural Products Using Hypervalent Iodine Reagents

    Science.gov (United States)

    Maertens, Gaetan; L'homme, Chloe; Canesi, Sylvain

    2014-12-01

    We present a review of natural product syntheses accomplished in our laboratory during the last five years. Each synthetic route features a phenol dearomatization promoted by an environmentally benign hypervalent iodine reagent. The dearomatizations demonstrate the “aromatic ring umpolung” concept, and involve stereoselective remodeling of the inert unsaturations of a phenol into a highly functionalized key intermediate that may contain a quaternary carbon center and a prochiral dienone system. Several new oxidative strategies were employed, including transpositions (1,3-alkyl shift and Prins-pinacol), a polycyclization, an ipso rearrangement, and direct nucleophilic additions at the phenol para position. Several alkaloids, heterocyclic compounds, and a polycyclic core have been achieved, including sceletenone (a serotonin reuptake inhibitor), acetylaspidoalbidine (an antitumor agent), fortucine (antiviral and antitumor), erysotramidine (curare-like effect), platensimycin (an antibiotic), and the main core of a kaurane diterpene (immunosuppressive agent and stimulator of apoptosis). These concise and in some cases enantioselective syntheses effectively demonstrate the importance of hypervalent iodine reagents in the total synthesis of bioactive natural products.

  13. Total Synthesis of Natural Products Using Hypervalent Iodine Reagents

    Directory of Open Access Journals (Sweden)

    Gaetan eMaertens

    2015-01-01

    Full Text Available We present a review of natural product syntheses accomplished in our laboratory during the last five years. Each synthetic route features a phenol dearomatization promoted by an environmentally benign hypervalent iodine reagent. The dearomatizations demonstrate the aromatic ring umpolung concept, and involve stereoselective remodeling of the inert unsaturations of a phenol into a highly functionalized key intermediate that may contain a quaternary carbon center and a prochiral dienone system. Several new oxidative strategies were employed, including transpositions (1,3-alkyl shift and Prins-pinacol, a polycyclization, an ipso rearrangement, and direct nucleophilic additions at the phenol para position. Several alkaloids, heterocyclic compounds, and a polycyclic core have been achieved, including sceletenone (a serotonin reuptake inhibitor, acetylaspidoalbidine (an antitumor agent, fortucine (antiviral and antitumor, erysotramidine (curare-like effect, platensimycin (an antibiotic, and the main core of a kaurane diterpene (immunosuppressive agent and stimulator of apoptosis. These concise and in some cases enantioselective syntheses effectively demonstrate the importance of hypervalent iodine reagents in the total synthesis of bioactive natural products.

  14. Fenton’s reagent application in the domestic sewers disinfection

    Directory of Open Access Journals (Sweden)

    Juacyara Cabonelli Campos

    2011-04-01

    Full Text Available This paper investigated the application of advanced oxidative processes – Fenton’s reagent - in wastewater disinfection. The treatments included the variation of the hydrogen peroxide and ferrous ions concentrations (Fe2+/H2O2 and pH values. The sewage samples were collected at Ilha do Governador Wastewater Treatment Plant (ETIG in Rio de Janeiro, Brazil, before the biological treatment with activated sludge. The average pH fluctuated from 6.5 to 7.2 and the most common value was 6.7. The reactions with the Fenton´s reagents, as well as the beginning of the analysis occurred within 24 hours after the sewage sample`s collection. The oxidative process, its behavior and the treatment effectiveness have been monitored by microorganism counting, COD, BOD, ammoniacal nitrogen and others. The results have shown a total elimination of the fecal coliforms in the wastewater samples when treated with H2O2 and Fe2+ in concentrations of 200 mg/L of 50 mg/L, respectively.

  15. Diagnóstico das meningites através de fitas reagentes Diagnosis of meningitis with reagent strips

    Directory of Open Access Journals (Sweden)

    Roberta M.C. Romanelli

    2001-06-01

    Full Text Available OBJETIVO: determinar a utilidade de fitas reagentes para a avaliação liquórica de pleocitose, glicorraquia e proteinorraquia no diagnóstico precoce e rápido de meningites em crianças. MÉTODOS: Foram incluídas no estudo amostras de líquor provenientes de 164 crianças admitidas no ambulatório de doenças infecto-contagiosas do Centro Geral de Pediatria (CGP-FHEMIG, com suspeita clínica de meningite, no período diurno de Maio/97 à Maio/99. A faixa etária dos pacientes variou de um mês a 12 anos (mediana de 12 meses, sendo obtidos resultados da citobioquímica liquórica (celularidade, glicorraquia e proteinorraquia de 154 desses pacientes. Esses achados foram comparados com reações do líquor em fitas reagentes. RESULTADOS: Através da citobioquímica líquórica foram identificados 43 casos de provável meningite bacteriana, 19 provavelmente viróticas e 83 amostras sem alterações. Pelas fitas reagentes, detectaram-se 41 casos de provável meningite bacteriana, dois casos de infecção meníngea provavelmente virótica, e em 71 exames não se verificaram alterações. Comparando os resultados obtidos por meio das fitas reagentes com a citobioquímica convencional, observou-se sensibilidade, especificidade, valores preditivos positivo e negativo e acurácia (90,7; 98,1; 95,1; 96,4; 96,1%, respectivamente. Ademais, a análise estatística pelo teste de Mc Nemar não evidenciou discordância significativa no diagnóstico de meningite bacteriana obtido através de ambos os métodos (p=0,68 e, pela estatística Kappa, verificou-se elevado grau de concordância entre os testes (pOBJECTIVE: to determine the usefulness of reagent strips in the evaluation of pleocytosis, cerebrospinal fluid glucose and protein levels for early and rapid diagnosis of meningitis in children. METHODS: We included cerebrospinal fluid samples of 164 children admitted to the outpatient clinic of Communicable Diseases of the General Pediatric Center (Funda

  16. Influence of the apparent molecular size of humic substances on the efficiency of coagulation using Fenton's reagent

    Directory of Open Access Journals (Sweden)

    MARCELO DE JULIO

    2013-06-01

    Full Text Available This work used Fenton's reagent as a coagulating agent in the treatment of water samples with high true colour caused by humic substances (HS extracted from peat. In addition, the effects of the apparent molecular size of HS on coagulation, flocculation and flotation were studied. To that end, four distinct water samples having the same true colour were prepared using HS with different molecular sizes, which were obtained by ultrafiltration fractioning. Through optimisation of coagulant dosage and coagulation pH, as well as posterior construction of coagulation diagrams for each water sample, it was verified that the sample prepared with the smallest apparent molecular size of HS was the most difficult to treat, requiring higher coagulant (Fenton's reagent dosages than samples prepared with larger HS molecular sizes. Furthermore, filtration experiments after dissolved air flotation (DAF were carried out in an attempt to simulate conventional treatment. The most representative results in filtered water were: apparent colour ≤ 3 HU; turbidity Este trabalho empregou o reagente de Fenton como agente coagulante no tratamento de águas contendo cor elevada causada pela introdução de substâncias húmicas extraídas de turfa. Além disto, foi estudado o efeito do tamanho molecular aparente das substâncias húmicas na eficiência da coagulação, floculação e flotação de águas; para isto foram preparadas quatro águas distintas apresentado a mesma cor verdadeira, mas com substâncias húmicas de diferentes tamanhos moleculares, obtidas por fracionamento por ultrafiltração. Por meio da otimização da dosagem de coagulante e respectivo pH de coagulação e posterior construção dos diagramas de coagulação para cada água de estudo, verificou-se que a água preparada com as substâncias húmicas de menor tamanho molecular aparente apresentou maior grau de dificuldade para tratamento, requerendo dosagens de coagulante (reagente de Fenton bem

  17. Synthesis of variants of Marfey's reagent having d-amino acids as chiral auxiliaries and liquid-chromatographic enantioseparation of (RS)-Mexiletine in spiked plasma: assessment and comparison with L-amino acid analogs.

    Science.gov (United States)

    Bhushan, Ravi; Vashistha, Vinod Kumar

    2015-01-30

    Five d-amino acids have been used for the first time to synthesize chiral derivatizing reagents (as variants of Marfey's reagent) by nucleophilic displacement of one of the fluorine atoms in 1,5-difluoro-2,4-dinitrobenzene as against the literature reports on application of only l-amino acids or their amides as chiral auxiliaries in dinitrobenzene (DNB) moiety. Five other DNB based reagents were also prepared by nucleophilic substitution of fluorine atom with the set of the same amino acids in l-configuration, as chiral auxiliaries. These reagents were characterized and used for synthesis of diastereomers of (RS)-Mexiletine spiked in human plasma. Diastereomers were synthesized employing microwave irradiation and were separated on reversed-phase C18 column. Performance of the two types of chiral derivatizing reagents was compared. The reagents containing d-amino acids provided enhanced separation of diastereomers than those containing l-amino acids. The best resolution was obtained using mobile phase consisting of acetonitrile and 0.1% trifluoroacetic acid in gradient mode. The detection was carried out at 340nm. The method so developed was validated for linearity, accuracy and precision. The limit of quantitation was found to be approximately 25.2ngmL(-1) in human plasma. PMID:25576038

  18. Evaluation of commercial enzyme reagent kits by use of a semiautomated chemistry analyzer.

    Science.gov (United States)

    Beckala, H R; Agrell, J; Forsman, R W; Homburger, H A

    1979-08-01

    The overall performances of several enzyme reagent kits for alkaline phosphatase, creatine kinase, lactic dehydrogenase, and aspartate aminotransferase were evaluated using an ABA-100 Bichromatic Analyzer. Interassay precision using this instrument with commercial reagents compared well with published data for similar analyses performed at university hospitals and referral laboratories. Significantly poorer precision with lower limits of linearity was observed when reagents recommended for use at 30 C were used at 37 C. Significant differences in measured levels of creatine kinase, lactic dehydrogenase, and aspartate aminotransferase due to different lots of expendable cuvettes were found for elevated levels of these enzymes. All kit reagents met manufacturers' claims for stability; however, different absolute levels of lactic dehydrogenase were observed with one kit reagent on successive days. Slight hemolysis affected creatine kinase levels measured with some reagent kits significantly more than others.

  19. A feasibility study on the commercialization of reagent K for treating industrial wastewaters

    International Nuclear Information System (INIS)

    Removal efficiency decreases with large amount of reagent K added and increases under 0.555 molar concentration of Mg++. Optimum addition of reagent K was when molar concentration of Mg++ becomes 0.186 (Ca++ : Mg ++ = 1 : 0.5). Sludge arising decreased about 40 ∼50% with reagent K added, and settling property becomes better due to high density. Effect of reagent K addition is the same in lime and limestone experiment. Addition of reagent K was a little more effective in the mixture than in the supernatant. Optimum pH and injection amount turned out to be 12 and 1 % v/v, respectively. It can be concluded that waste sludge resulting from SOx removal with reagent K can be reused in the treatment of the industrial waste water such as dyeing waste water. (author). 9 refs., 5 tabs., 19 figs

  20. Study of synthesis, reactions and enantiomerization of Cα- chiral Grignard reagents

    OpenAIRE

    Patwardhan, Neeraj Narendra

    2012-01-01

    The development of chiral organometallics for asymmetric synthesis is a topic of significant research in the recent past. The most studied in this class are the chiral organolithium reagents with many reported examples. The primary focus of our research is the development of Cα-chiral Grignard reagents, where the metal bearing α-carbon is the sole source of chirality. Examples of such Grignard reagents are rare owing to the problems associated with their synthesis, and their low configurati...

  1. UP-TORR: online tool for accurate and Up-to-Date annotation of RNAi Reagents.

    Science.gov (United States)

    Hu, Yanhui; Roesel, Charles; Flockhart, Ian; Perkins, Lizabeth; Perrimon, Norbert; Mohr, Stephanie E

    2013-09-01

    RNA interference (RNAi) is a widely adopted tool for loss-of-function studies but RNAi results only have biological relevance if the reagents are appropriately mapped to genes. Several groups have designed and generated RNAi reagent libraries for studies in cells or in vivo for Drosophila and other species. At first glance, matching RNAi reagents to genes appears to be a simple problem, as each reagent is typically designed to target a single gene. In practice, however, the reagent-gene relationship is complex. Although the sequences of oligonucleotides used to generate most types of RNAi reagents are static, the reference genome and gene annotations are regularly updated. Thus, at the time a researcher chooses an RNAi reagent or analyzes RNAi data, the most current interpretation of the RNAi reagent-gene relationship, as well as related information regarding specificity (e.g., predicted off-target effects), can be different from the original interpretation. Here, we describe a set of strategies and an accompanying online tool, UP-TORR (for Updated Targets of RNAi Reagents; www.flyrnai.org/up-torr), useful for accurate and up-to-date annotation of cell-based and in vivo RNAi reagents. Importantly, UP-TORR automatically synchronizes with gene annotations daily, retrieving the most current information available, and for Drosophila, also synchronizes with the major reagent collections. Thus, UP-TORR allows users to choose the most appropriate RNAi reagents at the onset of a study, as well as to perform the most appropriate analyses of results of RNAi-based studies.

  2. Selective-Reagent-Ionization Mass Spectrometry: New Prospects for Atmospheric Research

    Science.gov (United States)

    Sulzer, Philipp; Jordan, Alfons; Hartungen, Eugen; Hanel, Gernot; Jürschik, Simone; Herbig, Jens; Märk, Lukas; Märk, Tilmann D.

    2014-05-01

    Proton-Transfer-Reaction Mass Spectrometry (PTR-MS), which was introduced to the scientific community in the 1990's, has quickly evolved into a well-established technology for atmospheric research and environmental chemistry [1]. Advantages of PTR-MS are i) high sensitivities of several hundred cps/ppbv, ii) detection limits at or below the pptv level, iii) direct injection sampling (i.e. no sample preparation), iv) response times in the 100 ms regime and v) online quantification. However, one drawback is a somehow limited selectivity, as in case of quadrupole mass filter based instruments only information about nominal m/z are available. In Time-Of-Flight (TOF) mass analyzer based instruments selectivity is drastically increased by a high mass resolution of up to 8000 m/Δm, but e.g. isomers still cannot be separated. In 2009 we introduced an advanced version of PTR-MS, which permits switching the reagent ions from H3O+ to NO+ and O2+, respectively [2]. This novel type of instrumentation was called Selective-Reagent-Ionization Mass Spectrometry (SRI-MS) and has been successfully used to separate isomers, e.g. the biogenic compounds isoprene and 2-methyl-3-buten-2-ol as shown by Karl et al. [3]. Switching the reagent ions dramatically increases selectivity and thus applicability of SRI-MS in atmospheric research. Here we report on the latest results utilizing an even more advanced embodiment of SRI-MS enabling the use of the additional reagent ions Kr+ and Xe+ [4]. With this technology important atmospheric compounds, such as CO2, CO, CH4, O2, etc. can be quantified and selectivity is increased even further. We present comparison data between diesel and gasoline car exhaust gases and quantitative data on indoor air for these compounds, which are not detectable with classical PTR-MS. Additionally, we show very recent examples of isomers which cannot be separated with PTR-MS but can clearly be distinguished with SRI-MS. Finally, we give an overview of ongoing SRI

  3. Nanomechanical identification of liquid reagents in a microfluidic channel

    DEFF Research Database (Denmark)

    Khan, Faheem; Kim, Seonghwan; Lee, Dongkyu;

    2014-01-01

    Integration of promising technologies that can enhance sensitivity, selectivity, and throughput into micro total analysis systems (μTAS) are important in making them useful in precise screening of reaction byproducts in analytical chemistry, cellular biology and pharmaceutical industries. But unf......Integration of promising technologies that can enhance sensitivity, selectivity, and throughput into micro total analysis systems (μTAS) are important in making them useful in precise screening of reaction byproducts in analytical chemistry, cellular biology and pharmaceutical industries...... mechanical bending of the cantilever under infrared (IR) radiation. This technique also allows simultaneous physical characterization of the liquid reagent using variations in resonance frequency. It is useful in lab-on-a-chip devices and has a myriad of applications in drug screening, bioreactor monitoring...

  4. A Novel Fluorescent Reagent for Analysis of Hydrogen Peroxide

    Institute of Scientific and Technical Information of China (English)

    董素英; 苏美红; 聂丽华; 马会民

    2003-01-01

    8-(4,6-Dichloro-1,3,5-trazinoxy)quinoline(DTQ) was evaluated as a new fluorescent reagent for determining hydrogen peroxide.It was found that the fluorescence intensity of DTQ in alkaline medium could be dramatically enhanced upon addition of H2O2.Based on this effect,a simple and selective method for the spectrofluorimetric determination of hydrogen peroxide was estabhlished.The relative standard deviation of the method was found to be 1.1?for 9 replicate determinations of a 4.6×10-6mol/L hydrogen peroxide solution.The linear range was 2.3×10-7-2.3×10-5mol/L with a detection limit of 2.2×10-8mol/L(S/N=3).The ,method was attempted to determine hydrogen peroxide in synthetic human serum samples with satisfactory results.

  5. Determination of dopamine in presence of ascorbic acid and uric acid using poly (Spands Reagent) modified carbon paste electrode

    International Nuclear Information System (INIS)

    In this paper, we have fabricated a modified carbon paste electrode (CPE) by electropolymerisation of spands reagent (SR) onto surface of CPE using cyclic voltammetry (CV). The developed electrode was abbreviated as poly(SR)/CPE and the surface morphology of the modified electrode was studied by using scanning electron microscopy (SEM). The developed electrode showed higher electrocatalytic properties towards the detection of dopamine (DA) in 0.1 M phosphate buffer solution (PBS) at pH 7.0. The effect of pH, scan rate, accumulation time and concentration of dopamine was studied at poly(SR)/CPE. The poly(SR)/CPE was successfully used as a sensor for the selective determination of DA in presence of ascorbic acid (AA) and uric acid (UA) without any interference. The poly(SR)/CPE showed a good detection limit of 0.7 μM over the linear dynamic range of 1.6 μM to 16 μM, which is extremely lower than the reported methods. The prepared poly(SR)/CPE exhibited good stability, high sensitivity, better reproducibility, low detection limit towards the determination of DA. The developed method was also applied for the determination of DA in real samples. - Highlights: • Electropolymerization of spands reagent was fabricated by cyclic voltammetry • The Poly (spands reagent) electrode shows excellent electrocatalytic activity for the detection of dopamine. • The detection limit for dopamine was found to be 0.7 μM. • The proposed method can be applied for DA in injection and human blood serum samples

  6. Determination of dopamine in presence of ascorbic acid and uric acid using poly (Spands Reagent) modified carbon paste electrode

    Energy Technology Data Exchange (ETDEWEB)

    Veera Manohara Reddy, Y.; Prabhakara Rao, V.; Vijaya Bhaskar Reddy, A.; Lavanya, M.; Venu, M.; Lavanya, M.; Madhavi, G., E-mail: gmchem01@gmail.com

    2015-12-01

    In this paper, we have fabricated a modified carbon paste electrode (CPE) by electropolymerisation of spands reagent (SR) onto surface of CPE using cyclic voltammetry (CV). The developed electrode was abbreviated as poly(SR)/CPE and the surface morphology of the modified electrode was studied by using scanning electron microscopy (SEM). The developed electrode showed higher electrocatalytic properties towards the detection of dopamine (DA) in 0.1 M phosphate buffer solution (PBS) at pH 7.0. The effect of pH, scan rate, accumulation time and concentration of dopamine was studied at poly(SR)/CPE. The poly(SR)/CPE was successfully used as a sensor for the selective determination of DA in presence of ascorbic acid (AA) and uric acid (UA) without any interference. The poly(SR)/CPE showed a good detection limit of 0.7 μM over the linear dynamic range of 1.6 μM to 16 μM, which is extremely lower than the reported methods. The prepared poly(SR)/CPE exhibited good stability, high sensitivity, better reproducibility, low detection limit towards the determination of DA. The developed method was also applied for the determination of DA in real samples. - Highlights: • Electropolymerization of spands reagent was fabricated by cyclic voltammetry • The Poly (spands reagent) electrode shows excellent electrocatalytic activity for the detection of dopamine. • The detection limit for dopamine was found to be 0.7 μM. • The proposed method can be applied for DA in injection and human blood serum samples.

  7. Supramolecular chemical shift reagents inducing conformational transitions: NMR analysis of carbohydrate homooligomer mixtures

    DEFF Research Database (Denmark)

    Beeren, Sophie; Meier, Sebastian

    2015-01-01

    We introduce the concept of supramolecular chemical shift reagents as a tool to improve signal resolution for the NMR analysis of homooligomers. Non-covalent interactions with the shift reagent can constrain otherwise flexible analytes inducing a conformational transition that results in signal...

  8. Application of cyclic phosphonamide reagents in the total synthesis of natural products and biologically active molecules

    OpenAIRE

    Thilo Focken; Stephen Hanessian

    2014-01-01

    A review of the synthesis of natural products and bioactive compounds adopting phosphonamide anion technology is presented highlighting the utility of phosphonamide reagents in stereocontrolled bond-forming reactions. Methodologies utilizing phosphonamide anions in asymmetric alkylations, Michael additions, olefinations, and cyclopropanations will be summarized, as well as an overview of the synthesis of the employed phosphonamide reagents.

  9. In situ generation of the Ohira-Bestmann Reagent from stable sulfonyl azide

    DEFF Research Database (Denmark)

    Jepsen, Tue Heesgaard; Kristensen, Jesper Langgaard

    2014-01-01

    We report an improved method for in situ generation of the Ohira-Bestmann reagent. Using the recently reported bench stable imidazole-1-sulfonyl azide as diazotransfer reagent, this new method represents a safe and scalable approach for the transformation of aldehydes into terminal alkynes. Furth...

  10. A new achiral reagent for the incorporation of multiple amino groups into oligonucleotides

    DEFF Research Database (Denmark)

    Behrens, Carsten; Petersen, Kenneth H.; Egholm, Michael;

    1995-01-01

    The synthesis of a new functionalized achiral linker reagent (10) for the incorporation of multiple primary amino groups into oligonucleotides is described. The linker reagent is compatible with conventional DNA-synthesis following the phosphoramidite methodology, and the linker can be incorporat...

  11. PyFluor: A Low-Cost, Stable, and Selective Deoxyfluorination Reagent.

    Science.gov (United States)

    Nielsen, Matthew K; Ugaz, Christian R; Li, Wenping; Doyle, Abigail G

    2015-08-01

    We report an inexpensive, thermally stable deoxyfluorination reagent that fluorinates a broad range of alcohols without substantial formation of elimination side products. This combination of selectivity, safety, and economic viability enables deoxyfluorination on preparatory scale. We employ the [(18)F]-labeled reagent in the first example of a no-carrier-added deoxy-radiofluorination.

  12. 21 CFR 864.9225 - Cell-freezing apparatus and reagents for in vitro diagnostic use.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cell-freezing apparatus and reagents for in vitro diagnostic use. 864.9225 Section 864.9225 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... Establishments That Manufacture Blood and Blood Products § 864.9225 Cell-freezing apparatus and reagents for...

  13. Prediction of Reagents Needs Using Radial Basis Function in Teaching Hospital

    Directory of Open Access Journals (Sweden)

    Indrabayu

    2015-08-01

    Full Text Available A robust reagents prediction is able to support the service improvement in laboratories. In this paper, Radial Basis Function Networks (RBFN method with (3, Q, 1 architecture is used to predict two types of reagents needs, i.e. SD Bioline HBsAg and SD Bioline Anti HCV. Data of reagents from 2012 - 2013 are used as training data, whereas 2014 data are used as comparative data for the prediction result. In RBFN training, the best condition obtained when the spread value is 4 with RMSE 1.63E-06 for both types of reagents. The prediction results with RBFN methods reached 99% with correlation value of 0.99 for each reagents. RBFN method shows better prediction result compared to BPNN method with prediction of 92%.

  14. HIV抗体诊断试剂的临床质量评估%Evaluation of screening reagents for detecting antibodies of human immunodeficiency virus

    Institute of Scientific and Technical Information of China (English)

    路新利; 赵翠英; 赵宏儒; 白广义; 李巧敏; 李岩; 王莹莹; 刘丽花

    2013-01-01

    . 33%-95. 56%. The total consistence rates of the samples prepared by the laboratory was 98. 19% -99. 55% for ELISA reagents, and the sensitivities and the total consistence rate of the reagent D were the lowest, only 96. 83% and 98. 19% , respectively. The total consistence rate of the rapid reagents was 92. 44% - 97. 33%. Conclusion There are co-existence of false positive and false negative results in tested reagents except for reagent E in which no false negativity is found and for reagent H in which no false positivity is found. The quality of the screening reagents is rather different. The false negativity or the false positivity would result in resource waste or HIV transmission. The quality of reagents produced domestically should be further improved.

  15. Microstructural characterization of aluminum alloys using Weck's reagent, part I: Applications

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Li, E-mail: gao.l.ab@m.titech.ac.jp [Department of Materials Science and Engineering, Tokyo Institute of Technology, Yokohama 226-8502 (Japan); Harada, Yohei, E-mail: harada.y.ah@m.titech.ac.jp [Department of Materials Science and Engineering, Tokyo Institute of Technology, Yokohama 226-8502 (Japan); Kumai, Shinji, E-mail: kumai.s.aa@m.titech.ac.jp [Department of Metallurgy and Ceramics Science, Tokyo Institute of Technology, Tokyo 152-8550 (Japan)

    2015-09-15

    This paper focuses on the applications of a color etchant for aluminum alloys named Weck's reagent. The Al phase shows different colors from location to location after being etched by Weck's reagent. It is proved that Weck's reagent is very sensitive to the micro-segregations of Ti, Si and Mg in Al alloys so that characterization of the micro-segregations can be qualitatively realized which is usually done by electronic probe techniques. With the help of this characterization method, we are able to evaluate solid fractions for the semi-solid processed Al alloy with a better accuracy by excluding the Al grain growth during water quenching. To understand this reagent better, the color change during etching is investigated by applying different etching times at room temperature (25 °C). Among those results, 12 s shows the best color contrast after etching. Finally, we repeat the 12 second etching for four times through repeating a polishing–etching process. The result exhibits that Weck's reagent has a satisfying re-producibility with stable color and color distribution for the four times etching result. The second part of this study covers the coloring mechanism of Weck's reagent by characterizing the etched surface via various characterization methods. - Highlights: • The applications of Weck's reagent for Al alloys are introduced in detail. • Detailed relationship between micro-segregations in Al phase and the color difference revealed by Weck's reagent are studied. • Etching time has a strong influence on the color revealed by Weck's reagent. • Besides micro-segregation, grain boundaries can also be visualized by Weck's reagent, which was proved by EBSD analysis.

  16. Effects of acidifying reagents on microwave treatment of dairy manure.

    Science.gov (United States)

    Srinivasan, Asha; Nkansah-Boadu, Frank; Liao, Ping H; Lo, Kwang V

    2014-01-01

    Dairy manure, acidified using organic acids (acetic, oxalic, and citric acid) were treated with microwave enhanced advanced oxidation process (MW/H2O2-AOP). The effect of a mixture of oxalic acid and commonly used mineral acids (sulfuric and hydrochloric acid) on MW/H2O2-AOP was also examined. Substantial amounts of phosphorus were released under MW/H2O2-AOP, regardless of organic acid or mineral acid used. All three organic acids were good acidifying reagents; however, only oxalic acid could remove free calcium ion in the solution, and improve settleability of dairy manure. The MW/H2O2-AOP and calcium removal process could be combined into a single-stage process, which could release phosphate, solubilize solids and remove calcium from dairy manure at the same time. A mixture of oxalic acid and mineral acid produced the maximum volume of clear supernatant and had an ideal molar ratio of calcium to magnesium for effective struvite (magnesium ammonium phosphate) crystallization process. A single-stage MW/H2O2-AOP would simplify the process and reduce mineral acid consumption compared to a two-stage operation. The results of a pilot scale study demonstrate that MW/H2O2-AOP is effective in treating manure and recovering resource from dairy farms.

  17. The NIH-NIAID Filariasis Research Reagent Resource Center.

    Directory of Open Access Journals (Sweden)

    Michelle L Michalski

    2011-11-01

    Full Text Available Filarial worms cause a variety of tropical diseases in humans; however, they are difficult to study because they have complex life cycles that require arthropod intermediate hosts and mammalian definitive hosts. Research efforts in industrialized countries are further complicated by the fact that some filarial nematodes that cause disease in humans are restricted in host specificity to humans alone. This potentially makes the commitment to research difficult, expensive, and restrictive. Over 40 years ago, the United States National Institutes of Health-National Institute of Allergy and Infectious Diseases (NIH-NIAID established a resource from which investigators could obtain various filarial parasite species and life cycle stages without having to expend the effort and funds necessary to maintain the entire life cycles in their own laboratories. This centralized resource (The Filariasis Research Reagent Resource Center, or FR3 translated into cost savings to both NIH-NIAID and to principal investigators by freeing up personnel costs on grants and allowing investigators to divert more funds to targeted research goals. Many investigators, especially those new to the field of tropical medicine, are unaware of the scope of materials and support provided by the FR3. This review is intended to provide a short history of the contract, brief descriptions of the fiilarial species and molecular resources provided, and an estimate of the impact the resource has had on the research community, and describes some new additions and potential benefits the resource center might have for the ever-changing research interests of investigators.

  18. Creep of Chinese Fir Wood Treated by Different Reagents

    Institute of Scientific and Technical Information of China (English)

    Xue Feng-lian; Zhao Guang-jie; Lü Wen-hua

    2005-01-01

    In order to investigate the effect of different reagents on changes of the crystalline region and amorphous region(Matrix) in wood cell walls, the creep behavior of Chinese fir (Cunninghamia lanceolata) wood treated with dimethyl sulfoxide(DMSO) and diethyl amine, sulfur dioxide and dimethyl sulfoxide mixture (DEA-SO2-DMSO), and the untreated wood at oven-dried,air-dry and water-saturated states during adsorption and desorption processes were all examined in air or in water. The measurements were carried out at ambient temperature and atmospheric pressure. The load is constant with 62 g or 0.607 6 N. The results obtained were as follows: 1) The instantaneous compliance Jo and the creep compliance J of specimens decrystallized with DEA-SO2-DMSO solution were bigger than those of DMSO swollen wood, and the latter was still much bigger than those of untreated wood. 2) For untreated wood, Jo and J increased with equilibrium moisture content (EMC) of wood, but there was not apparent correlation between wood EMC and the relative compliance. 3) Specimens treated with DMSO and DEA-SO2-DMSO mixture were recrystallized after immersion in water, and the degree of recrystallization of the former was larger. 4) For oven-dried specimens, the creep compliances in water were bigger than those in air. But for fiber-saturated and water-saturated specimens they were nearly equivalent to each other.

  19. New reagents on the horizon for immune tolerance.

    Science.gov (United States)

    St Clair, E William; Turka, Larry A; Saxon, Andrew; Matthews, Jeffrey B; Sayegh, Mohamed H; Eisenbarth, George S; Bluestone, Jeffrey

    2007-01-01

    Recent advances in immunology and a growing arsenal of new drugs are bringing the focus of tolerance research from animal models into the clinical setting. The conceptual framework for therapeutic tolerance induction has shifted from a "sledgehammer" approach that relies solely on cellular depletion and cytokine targeting, to a strategy directed toward restoring a functional balance across the immune system, namely the different populations of naive cells, effector and memory cells, and regulatory cells. Unlocking the key to tolerance induction in the future will likely depend on our ability to harness the functions of T regulatory cells. Also, dendritic cells are strategically positioned at the interface between innate and adaptive immunity and may be subject to deliberate medical intervention in a way that can control a chronic inflammatory response. Many reagents with tolerance-inducing potential are currently undergoing clinical testing in transplantation, autoimmune diseases, and allergic diseases, and even more that are on the horizon promise to offer enormous benefits to human health. PMID:16987079

  20. Deep soil mixing for reagent delivery and contaminant treatment

    Energy Technology Data Exchange (ETDEWEB)

    Korte, N.; Gardner, F.G. [Oak Ridge National Lab., Grand Junction, CO (United States); Cline, S.R.; West, O.R. [Oak Ridge National Lab., TN (United States)] [and others

    1997-12-31

    Deep soil mixing was evaluated for treating clay soils contaminated with TCE and its byproducts at the Department of Energy`s Kansas City Plant. The objective of the project was to evaluate the extent of limitations posed by the stiff, silty-clay soil. Three treatment approaches were tested. The first was vapor stripping. In contrast to previous work, however, laboratory treatability studies indicated that mixing saturated, clay soil was not efficient unless powdered lime was added. Thus, powder injection of lime was attempted in conjunction with the mixing/stripping operation. In separate treatment cells, potassium permanganate solution was mixed with the soil as a means of destroying contaminants in situ. Finally, microbial treatment was studied in a third treatment zone. The clay soil caused operational problems such as breakage of the shroud seal and frequent reagent blowouts. Nevertheless, treatment efficiencies of more than 70% were achieved in the saturated zone with chemical oxidation. Although expensive ($1128/yd{sup 3}), there are few alternatives for soils of this type.

  1. Direct quantification of mRNA and miRNA from cell lysates using reverse transcription real time PCR: a multidimensional analysis of the performance of reagents and workflows.

    Directory of Open Access Journals (Sweden)

    Yoon Khei Ho

    Full Text Available Substantial efforts have been devoted to in vitro testing of candidate chemotherapeutics by profiling transcriptional changes across the collection of NCI-60 cell-lines. A work-flow with reagents that enable the direct quantification of RNA of different molecular sizes simultaneously in the same sample without laborious total RNA isolation will invariably increase the throughput and accuracy of the study. MicroRNAs (miRNAs are known to regulate most cellular functions, acting post-transcriptionally by repressing numerous eukaryotic mRNAs. Recent findings on the remarkable stability of miRNA prompted us to investigate the feasibility of quantifying the expression levels of both mRNA and miRNA directly from cell lysates (cell-to-Ct. Multidimensional analyses of the expressions of mRNA and miRNA across seven NCI-60 cell lines and multiple reagents were conducted to assess the performances of these reagents and workflows for cell-to-Ct measurements using reverse transcription-quantitative polymerase chain reaction (RT-qPCR. Quantification of RNA species using lysates prepared from an in-house and one of the commercial reagents demonstrated comparable performance to those prepared by the more laborious and conventional method of using guanidinium-phenol-chloroform. Additionally, miRNA was found to be highly stable in the cell lysates when incubated at room temperature for prolonged period of time and subjected to multiple freeze-thaw cycles. In summary, this study demonstrated significant differences in pre-analytical performance of a variety of commercially available reagents and described a cost-effective reagent useful for rapid, scalable, and high-throughput workflow for the detection of mRNA and miRNA from the same biological sample.

  2. Stability study for magnetic reagent assaying Hb and HbA1c

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, Wen-Pin [Actherm Inc., Hsinchu 200, Taiwan (China); Chieh, J.J.; Yang, C.C. [Institute of Electro-optical Science and Technology, National Taiwan Normal University, Taipei 116, Taiwan (China); Yang, S.Y. [Institute of Electro-optical Science and Technology, National Taiwan Normal University, Taipei 116, Taiwan (China); MagQu Co., Ltd., Sindian Dist., New Taipei City 231, Taiwan (China); Chen, Po-Yu; Huang, Yu-Hao [Actherm Inc., Hsinchu 200, Taiwan (China); Hong, Y.W. [Institute of Electro-optical Science and Technology, National Taiwan Normal University, Taipei 116, Taiwan (China); Horng, H.E., E-mail: phyfv001@ntnu.edu.tw [Institute of Electro-optical Science and Technology, National Taiwan Normal University, Taipei 116, Taiwan (China)

    2013-01-15

    Reagents for magnetically labeled immunoassay on human Hb and human HbA1c have been synthesized. The reagents consist of Fe{sub 3}O{sub 4} magnetic particles biofunctionalized with antibodies against Hb and HbA1c. It has been demonstrated that the reagents can be applied to quantitatively detect Hb and HbA1c by using immunomagnetic reduction assay. In addition to characterizing the assay properties, such as the standard curve and the low-detection limit, the stability of reagents is investigated. To do this, the temporal dependence of particle sizes and the bio-activity of reagents are monitored. The results show that the reagents are highly stable when stored at 2-8 Degree-Sign C. This means that the reagents synthesized in this work are promising for practical applications. - Highlights: Black-Right-Pointing-Pointer The properties of assaying Hb and HbA1c using immunomagnetic reduction are studied. Black-Right-Pointing-Pointer The magnetic nanoparticles with antibodies are highly stable in solutions. Black-Right-Pointing-Pointer No significant mutual interference between Hb and HbA1c in assays is observed. Black-Right-Pointing-Pointer High-sensitivity assays on Hb and HbA1c using immunomagnetic reduction are achieved.

  3. Exploitation of Fenton and Fenton-like reagents as alternative conditioners for alum sludge conditioning

    Institute of Scientific and Technical Information of China (English)

    Maha A. Tony; Y. Q. Zhao; Aghareed M. Tayeb

    2009-01-01

    The use of Fenton's reagent (Fe2+/H2O2) and Fenton-like reagents containing transition metals of Cu(II), Zn(II), Co(II), and Mn(II) for an alum sludge conditioning to improve its dewaterability was investigated in this study. The results obtained were compared with those obtained from conditioning the same alum sludge using cationic and anionic polymers. Experimental results show that Fenton's reagent was the best among the Fenton and Fenton-like reagents for the alum sludge conditioning. A considerable effectiveness of capillary suction time (CST) reduction efficiency of 47% can be achieved under test conditions of Fe2+/H2O2 = 20/125 mg/gDS (dry solid) and pH = 6.0. The observation of floc-like particles after Fenton's reagent conditioning of alum sludge suggests that the mechanism of Fenton's reagent conditioning was different with that of polymer conditioning. In spite of the less efficiency in the CST reduction of Fenton's reagent in alum sludge conditioning compared with that of polymer conditioning, is less than that of polymer conditioning.[b1] This study provided an example of proactive treatment engineering, which is aimed at seeking a safe alternative to the use of polymers in sludge conditioning towards achieving a more sustainable sludge management strategy.

  4. Oxidation of Pentachlorophenol by Fenton’s Reagent

    Directory of Open Access Journals (Sweden)

    M Farrokhi

    2003-07-01

    Full Text Available Several authors have indicated that PCP is a toxic chemical and recalcitrant to biodegradation. AOPs is one of the moste effective process for degradation of persistant compound.Since the mineralization of recalcitrant compound by AOPs (Advanced Oxidation Processes often requires long reaction time and strong doses of oxidant, the combination of this process with biological one, considered as an efficient and economic method. In this worke degradation of pentachlorophenol in aqueous solution with fenton reagent (H2O2 +Ferrous ionwas studied. The experiment was done in batch mode, and the initial concentration of PCP was 0.055mM, in pH=3, H2O2=0.6mM, Fe=0.2mM, more than 95% of PCP was degraded in first minute after the reaction was started.Therefor this reaction is very fast and in the initial phase degredation of PCP follows first order kinetics and kineticts constant (K was 0.026 (S-1. Chloride ion generatation as PCP degredation by product was investigated ,and it was found that the scavenging effect of chloride is negligible. pH and UV215 absorbance analysis, after reaction completion, indicated that generated intermediates have the less chlorinated nature, acidic properties and nonphenolic structure. Chloride ion increases from 0 mg/L to 6 mg/L, pH decreases from 3 to 2.82 and UV215 absorbance decreasees from 0.48 to 0.1, therefor it can be resulted that their biodegradability modified and their recalcitrance reduced. In the long time reaction (10hr experiments, TOC and COD analysis indicated that PCP did not mineralize and TOC and COD reduction was only 20% and 30% respectively. Results from this study indicated that scavenging effects of generated intermadiate is important in highe doses of H2O2.

  5. Small particle reagent based on crystal violet dye for developing latent fingerprints on non-porous wet surfaces

    Directory of Open Access Journals (Sweden)

    Richa Rohatgi

    2015-12-01

    Full Text Available Small particle reagent (SPR is a widely used method for developing latent fingerprints on non-porous wet surfaces. SPR based on zinc carbonate hydroxide monohydrate, ZnCo3·2Zn(OH2·H2O – also called basic zinc carbonate – has been formulated. The other ingredients of the formulation are crystal violet dye and a commercial liquid detergent. The composition develops clear, sharp and detailed fingerprints on non-porous items, after these were immersed separately in clean and dirty water for variable periods of time. The ability of the present formulation to detect weak and faint chance prints not only enhances its utility, but also its potentiality in forensic case work investigations. The raw materials used to prepare the SPR are cost-effective and non-hazardous.

  6. Preparation of Simulated High-level Liquid Waste for the Second Run Vitrification Cold-bench Engineering Test

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This report summarizes the preparation for simulated high-level liquid waste(HLLW), which is used on the operating test of the second cold-bench engineering test. The main contents of the document include: requirement for preparation of the simulated HLLW; requirement for chemical reagents; procedure of the preparation; training on the personnel; problem and suggestion for the test, ect.

  7. Possible losses of trace and ultratrace elements during preconcentration of semiconductor-grade reagents

    International Nuclear Information System (INIS)

    In quality control of all chemical reagents in semiconductor industry a trace enrichment by preconcentration processes is usual, but trace adulteration must be excluded. To investigate possible trace losses under different conditions, radioactive isotopes are an ideal means. (author)

  8. Improvements to parallel plate flow chambers to reduce reagent and cellular requirements

    Directory of Open Access Journals (Sweden)

    Larson Richard S

    2001-09-01

    Full Text Available Abstract Background The parallel plate flow chamber has become a mainstay for examination of leukocytes under physiologic flow conditions. Several design modifications have occurred over the years, yet a comparison of these different designs has not been performed. In addition, the reagent requirements of many designs prohibit the study of rare leukocyte populations and require large amounts of reagents. Results In this study, we evaluate modifications to a newer parallel plate flow chamber design in comparison to the original parallel plate flow chamber described by Lawrence et al. We show that modifications in the chamber size, internal tubing diameters, injection valves, and a recirculation design may dramatically reduce the cellular and reagent requirements without altering measurements. Conclusions These modifications are simple and easily implemented so that study of rare leukocyte subsets using scarce or expensive reagents can occur.

  9. Evaluation of seamless ligation cloning extract preparation methods from an Escherichia coli laboratory strain.

    Science.gov (United States)

    Okegawa, Yuki; Motohashi, Ken

    2015-10-01

    Seamless ligation cloning extract (SLiCE) is a simple and efficient method for DNA cloning without the use of restriction enzymes. Instead, SLiCE uses homologous recombination activities from Escherichia coli cell lysates. To date, SLiCE preparation has been performed using an expensive commercially available lytic reagent. To expand the utility of the SLiCE method, we evaluated different methods for SLiCE preparation that avoid using this reagent. Consequently, cell extracts prepared with buffers containing Triton X-100, which is a common and low-cost nonionic detergent, exhibited sufficient cloning activity for seamless gene incorporation into a vector. PMID:26133399

  10. Evaluation of seamless ligation cloning extract preparation methods from an Escherichia coli laboratory strain.

    Science.gov (United States)

    Okegawa, Yuki; Motohashi, Ken

    2015-10-01

    Seamless ligation cloning extract (SLiCE) is a simple and efficient method for DNA cloning without the use of restriction enzymes. Instead, SLiCE uses homologous recombination activities from Escherichia coli cell lysates. To date, SLiCE preparation has been performed using an expensive commercially available lytic reagent. To expand the utility of the SLiCE method, we evaluated different methods for SLiCE preparation that avoid using this reagent. Consequently, cell extracts prepared with buffers containing Triton X-100, which is a common and low-cost nonionic detergent, exhibited sufficient cloning activity for seamless gene incorporation into a vector.

  11. Dosage Delivery of Sensitive Reagents Enables Glove Box-Free Synthesis

    OpenAIRE

    Sather, Aaron C.; Lee, Hong Geun; Colombe, James R.; Zhang, Anni; Buchwald, Stephen L.

    2015-01-01

    Contemporary organic chemists employ a broad range of catalytic and stoichiometric methods to construct molecules for applications in many fields, including material sciences 1 , pharmaceuticals 2–5 , agrochemicals, and sensors 6 . The potential utility of a synthetic method can be greatly reduced if it relies on the use of air- and/or moisture-sensitive reagents or catalysts. Furthermore, many synthetic chemistry laboratories have numerous containers of partially used reagents that have been...

  12. An efficient multistrategy DNA decontamination procedure of PCR reagents for hypersensitive PCR applications.

    Directory of Open Access Journals (Sweden)

    Sophie Champlot

    Full Text Available BACKGROUND: PCR amplification of minute quantities of degraded DNA for ancient DNA research, forensic analyses, wildlife studies and ultrasensitive diagnostics is often hampered by contamination problems. The extent of these problems is inversely related to DNA concentration and target fragment size and concern (i sample contamination, (ii laboratory surface contamination, (iii carry-over contamination, and (iv contamination of reagents. METHODOLOGY/PRINCIPAL FINDINGS: Here we performed a quantitative evaluation of current decontamination methods for these last three sources of contamination, and developed a new procedure to eliminate contaminating DNA contained in PCR reagents. We observed that most current decontamination methods are either not efficient enough to degrade short contaminating DNA molecules, rendered inefficient by the reagents themselves, or interfere with the PCR when used at doses high enough to eliminate these molecules. We also show that efficient reagent decontamination can be achieved by using a combination of treatments adapted to different reagent categories. Our procedure involves γ- and UV-irradiation and treatment with a mutant recombinant heat-labile double-strand specific DNase from the Antarctic shrimp Pandalus borealis. Optimal performance of these treatments is achieved in narrow experimental conditions that have been precisely analyzed and defined herein. CONCLUSIONS/SIGNIFICANCE: There is not a single decontamination method valid for all possible contamination sources occurring in PCR reagents and in the molecular biology laboratory and most common decontamination methods are not efficient enough to decontaminate short DNA fragments of low concentration. We developed a versatile multistrategy decontamination procedure for PCR reagents. We demonstrate that this procedure allows efficient reagent decontamination while preserving the efficiency of PCR amplification of minute quantities of DNA.

  13. Facile synthesis of aliphatic isothiocyanates and thioureas on solid phase using peptide coupling reagents

    DEFF Research Database (Denmark)

    Boas, Ulrik; Andersen, Heidi Gertz; Christensen, Jørn B.;

    2004-01-01

    Peptide coupling reagents can be used as versatile reagents for the formation of aliphatic isothiocyanates and thioureas on solid phase from the corresponding solid-phase anchored aliphatic primary amines. The formation of the thioureas is fast and highly chemoselective, and proceeds via formation...... of the intermediate isothiocyanate. The isothiocyanate and subsequent thiourea formation take place under standard peptide coupling conditions using carbon disulfide as the 'amino acid'. The thioureas are released from the resin and isolated in moderate to high yields....

  14. Staining characteristics of six commercially available monoclonal immunofluorescence reagents for direct diagnosis of Chlamydia trachomatis infections.

    OpenAIRE

    Cles, L D; Bruch, K; Stamm, W. E.

    1988-01-01

    Using purified elementary bodies of 14 Chlamydia trachomatis serovars in an in vitro assay, we compared the staining characteristics of six commercially available monoclonal antibody reagents used for direct immunofluorescent staining of patient smears. Considerable variation in the degree of brightness, consistency of staining, and specificity of the six reagents was found. Monoclonal antibodies against the major outer membrane proteins of C. trachomatis produced brighter fluorescence, more ...

  15. ORGANIC CHELATING REAGENT ON REDOX ADSORPTION OF ACTIVATED CARBON FIBER TOWARDS Au3+

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Organic chelating reagent influences upon the redox adsorption of activated carbon fibertowards Au3- were systematically investigated. The experimental results indicated that the presenceof organic chelating reagent on activated carbon fiber strongly affects adsorption capacity ofactivated carbon fiber towards Au3+. The reduction-adsorption amount of Au3+ increased three timesby the presence of 8-quinolinol. Furthermore, The reduction-adsorption amount of Au3+ depended onthe pH value of adsorption and temperature.

  16. Development of reagents for radioimmunoassay of: triiodothyronine, thyroxine and thyrotrophin; Desarrollo de reactivos para el radioinmunoanalisis de: triyodotironina, tiroxina y tirotrofina

    Energy Technology Data Exchange (ETDEWEB)

    Delgado S, B.; Lavalley E, C.; Ruiz J, A.; Garcia F, C.; Zamorano A, F

    1991-12-15

    The radioimmunoassay (RIA) of thyroid hormones it is the but it frequents of all the studies carried out by RIA in the laboratories of Nuclear Medicine, these essays are carried out with imported reagents. In the ININ the reagents and the necessary methodology have been developed for the triiodothyronine (T3), thyroxine (T4) and thyrotrophin (TSH). The good titles of the antibodies (Ac) primary for each hormone were of 1:4,000; 1:750 and 1:1,500. The used separation system was of double Ac with PEG to 10%, with titles of 1:10 for the second Ac of lamb. The specific activity for 125-I-T3 and 125-I-T4 oscillate between 850 at 900 {mu}Ci / {mu} g: being this of 90 {mu} Ci /{mu}g for TSH. To the first two hormones they were added 1-8 aniline naftalen sulfonic acid (ANS) to concentrations of 3 and 2 mg/ml respectively. As buffer for T3 and T4 it was used Tris-HCl pH 8.6 and PBS with normal serum of rabbit (SNC) for TSH. The standards got ready in buffer or free serum of thyroid hormones. The slope of the standard curves varied between -2.3 to -2.7 and the variation intra and inter assay among 4 to 10%. It is had at the moment in the ININ with standardized reagents for the RIA of T3, T4 and TSH, it is hoped to carry out tests in other laboratories and to establish the conditions of stability more appropriate to begin the preparation of pilot reagents. (Author)

  17. Inexpensive Multiplexed Library Preparation for Megabase-Sized Genomes

    OpenAIRE

    Baym, Michael; Kryazhimskiy, Sergey; Lieberman, Tami D; Chung, Hattie; Desai, Michael M; Kishony, Roy

    2015-01-01

    Whole-genome sequencing has become an indispensible tool of modern biology. However, the cost of sample preparation relative to the cost of sequencing remains high, especially for small genomes where the former is dominant. Here we present a protocol for rapid and inexpensive preparation of hundreds of multiplexed genomic libraries for Illumina sequencing. By carrying out the Nextera tagmentation reaction in small volumes, replacing costly reagents with cheaper equivalents, and omitting unnec...

  18. Comparison of chromatography systems for radiochemical purity determination of lyophilized reagents labeled with technetium-99m

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Elisiane G.; Almeida, Erika V.; Ramos, Marcelo P.S.; Alves, Edson V.; Benedetti, Stella; Mengatti, Jair; Fukumori, Neuza T.O.; Matsuda, Margareth M.N., E-mail: elisianegodoy@terra.com.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    A variety of lyophilized reagents (LR) labeled with {sup 99m}Tc has been developed for determining organ function or assessing disease status by imaging methods. Usually, the quality of the radiopharmaceutical preparations is evaluated by paper chromatography (PC), thin layer chromatography (TLC), instant thin layer chromatography silica gel (ITLC-SG), high performance liquid chromatography (HPLC) on reverse-phase columns and capillary electrophoresis (CE). PC and TLC have been applied due to the low cost and short time in the determination of pertechnetate ({sup 99m}TcO{sub 4}-) and technetium dioxide ({sup 99m}TcO{sub 2}). The present study reports the comparison between PC and TLC chromatographic methods for determination of the radiochemical purity of LR labeled with {sup 99m}Tc from IPEN-CNEN/SP (Brazil). PC was performed with Whatman 3MM/1MM paper chromatography strips and TLC with ITLC-SG sheets or reversed phase (RP). RP was used only for ECD. Although the radioactivity profile of the separation of the species on both stationary phases was satisfactory, the difference in results for % {sup 99m}TcO{sub 4}- and {sup 99m}TcO{sub 2} was up to 4.2 % using PC for ECD and PYP. ITLC supports gave better resolution than conventional PC supports for these products. In ECD analysis, the comparison was performed between RP and ITLC-SG stationary phases for determination of {sup 99m}TcO{sub 4}-, {sup 99m}TcO{sub 2} and other impurities. It was observed that the sheet length as described in the United States Pharmacopoeia was not sufficient for a good separation of the product and the impurities. The results showed that there were not significant differences between PC and TLC chromatographic stationary phases are going to be accomplished. (author)

  19. CaMKII binding to GluN2B is differentially affected by macromolecular crowding reagents.

    Directory of Open Access Journals (Sweden)

    Dayton J Goodell

    Full Text Available Binding of the Ca2+/calmodulin(CaM-dependent protein kinase II (CaMKII to the NMDA-type glutamate receptor (NMDAR subunit GluN2B controls long-term potentiation (LTP, a form of synaptic plasticity thought to underlie learning and memory. Regulation of this interaction is well-studied biochemically, but not under conditions that mimic the macromolecular crowding found within cells. Notably, previous molecular crowding experiments with lysozyme indicated an effect on the CaMKII holoenzyme conformation. Here, we found that the effect of molecular crowding on Ca2+/CaM-induced CaMKII binding to immobilized GluN2B in vitro depended on the specific crowding reagent. While binding was reduced by lysozyme, it was enhanced by BSA. The ATP content in the BSA preparation caused CaMKII autophosphorylation at T286 during the binding reaction; however, enhanced binding was also observed when autophosphorylation was blocked. Importantly, the positive regulation by nucleotide and BSA (as well as other macromolecular crowding reagents did not alleviate the requirement for CaMKII stimulation to induce GluN2B binding. The differential effect of lysozyme (14 kDa and BSA (66 kDa was not due to size difference, as both dextran-10 and dextran-70 enhanced binding. By contrast, crowding with immunoglobulin G (IgG reduced binding. Notably, lysozyme and IgG but not BSA directly bound to Ca2+/CaM in an overlay assay, suggesting a competition of lysozyme and IgG with the Ca2+/CaM-stimulus that induces CaMKII/GluN2B binding. However, lysozyme negatively regulated binding even when it was instead induced by CaMKII T286 phosphorylation. Alternative modes of competition would be with CaMKII or GluN2B, and the negative effects of lysozyme and IgG indeed also correlated with specific or non-specific binding to the immobilized GluN2B. Thus, the effect of any specific crowding reagent can differ, depending on its additional direct effects on CaMKII/GluN2B binding. However, the

  20. Two New 1,1,3,3-Tetramethylguanidinium Halochromates (C5H14N3CrO3X (X: Cl, F: Efficient Reagents for Oxidation of Organic Substrates under Solvent-Free Conditions and Microwave Irradiation

    Directory of Open Access Journals (Sweden)

    Kıvılcım Şendıl

    2016-01-01

    Full Text Available Two new mild oxidizing agents 1,1,3,3-tetramethylguanidinium fluorochromate (TMGFC and 1,1,3,3-tetramethylguanidinium chlorochromate (TMGCC were prepared in high yields by reacting tetramethylguanidine with CrO3 and related acid. These reagents are suitable to oxidize various primary and secondary alcohols and oximes to the corresponding carbonyl compounds under solvent-free conditions and microwave irradiation.

  1. N-Acetylbenzotriazole as a protein reagent. Specific behaviour towards delta-chymotrypsin.

    Science.gov (United States)

    Reboud-Ravaux, M

    1976-05-17

    using N-acetylbenzotriazole led to practical uses: direct spectrophotometric titration of chymotrypsin operational normality at pH 7 and rapid preparation of acetylated delta-chymotrypsin. As a protein reagent, N-acetylbenzotriazole is particularly interesting because of its reactivity towards amino and phenolic groups of amino acid residues, its stability at acid pH, i.e., k(hydrolysis=7.38 X 10(-3) min(-1) at 25 degrees C [Ravaux et al. (1971) Tetrahedron Letters, 4013-4015] and its aromaticity, responsible for optical properties. PMID:6280

  2. Production of biological reagents for radioimmunoassay second antibody

    International Nuclear Information System (INIS)

    The experimental production of second antibody to be used in hormonal assays, in which the first antibody is raised in rabbits, is described. Four sheep were immunized with the rabbit immunoglobulin prepared at IPEN-CNEN laboratory. Their antisera were evaluated by the human thyrotropin radioimmunoassay employing materials provided by the National Hormone and Pituitary Program (USA), in comparison with a reference antiserum of known quality, produced in goat by the Radioassay Systems Laboratories - RSL (USA). From the fourth booster injection the animals developed antiserum with titer similar to that exhibited by the commercial product, even presenting higher values. These antisera are now being examinated for the optimal conditions of precipitation before be packed for future use and distribution. (author)

  3. Zwitterionic reagents for labeling, cross-linking and improving the performance of chemiluminescent immunoassays.

    Science.gov (United States)

    Natrajan, Anand; Sharpe, David; Wen, David

    2012-03-01

    Improving reagent performance in immunoassays both to enhance assay sensitivity and to minimize interference are ongoing challenges in clinical diagnostics. We describe herein the syntheses of a new class of hydrophilic reagents containing sulfobetaine zwitterions and their applications. These zwitterionic reagents are potentially useful for improving the properties of immunoassay reagents. We demonstrate for the first time that zwitterion labeling is a general and viable strategy for reducing the non-specific binding of proteins to microparticles and, to improve the aqueous solubility of hydrophobic peptides. We also describe the synthesis of zwitterionic cross-linking reagents and demonstrate their utility for peptide conjugation. In automated, chemiluminescent immunoassays, improved assay performance was observed for a hydrophobic, small analyte (theophylline) using an acridinium ester conjugate with a zwitterionic sulfobetaine linker compared to a hexa(ethylene)glycol linker. Sandwich assay performance for a large analyte (thyroid stimulating hormone) was similar for the two acridinium ester labels. These results indicate that zwitterions are complementary to poly(ethylene)glycol in improving the aqueous solubility and reducing the non-specific binding of chemiluminescent acridinium ester conjugates. PMID:22278720

  4. N-triazinylammonium tetrafluoroborates. A new generation of efficient coupling reagents useful for peptide synthesis.

    Science.gov (United States)

    Kamiński, Zbigniew J; Kolesińska, Beata; Kolesińska, Justyna; Sabatino, Giuseppina; Chelli, Mario; Rovero, Paolo; Błaszczyk, Michał; Główka, Marek L; Papini, Anna Maria

    2005-12-01

    A new generation of triazine-based coupling reagents (TBCRs), designed according to the concept of "superactive esters", was obtained by treatment of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium (DMTMM) chloride with lithium or silver tetrafluoroborate. The structure of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium tetrafluoroborate was confirmed by X-ray diffraction. Activation of carboxylic acids by using this reagent proceeds via triazine "superactive ester". The coupling reagent was successfully used for the synthesis of Z-, Boc-, and Fmoc-protected dipeptides derived from natural and unnatural sterically hindered amino acids and for fragment condensation, in 80-100% yield and with high enantiomeric purity. The manual SPPS of the ACP(65-74) peptide fragment (H-Val-Gln-Ala-Ala-Ile-Asp-Tyr-Ile-Asn-Gly-OH) proceeded significantly faster than with TBTU or HATU, as well as the automated SPPS of the same fragment gave a purer product than by using TBTU or PyBOP. The reagent was also demonstrated to be efficient in on-resin head-to-tail cyclization of constrained cyclopeptides, in SPPS synthesis of Aib peptides, and in the synthesis of esters from appropriate acids, alcohols, and phenols. The high efficiency and versatility of this new generation of TBCRs confirm, for the first time, the usefulness of the concept of "superactive esters" in rational design of the structure of coupling reagents. PMID:16316237

  5. Remotely controlled reagent feed system for mixed waste treatment Tank Farm

    International Nuclear Information System (INIS)

    LLNL has developed and installed a large-scale. remotely controlled, reagent feed system for use at its existing aqueous low-level radioactive and mixed waste treatment facility (Tank Farm). LLNL's Tank Farm is used to treat aqueous low-level and mixed wastes prior to vacuum filtration and to remove the hazardous and radioactive components before it is discharged to the City of Livermore Water Reclamation Plant (LWRP) via the sanitary sewer in accordance with established limits. This reagent feed system was installed to improve operational safety and process efficiency by eliminating the need for manual handling of various reagents used in the aqueous waste treatment processes. This was done by installing a delivery system that is controlled either remotely or locally via a programmable logic controller (PLC). The system consists of a pumping station, four sets of piping to each of six 6,800-L (1,800-gal) treatment tanks, air-actuated discharge valves at each tank, a pH/temperature probe at each tank, and the PLC-based control and monitoring system. During operation, the reagents are slowly added to the tanks in a preprogrammed and controlled manner while the pH, temperature, and liquid level are continuously monitored by the PLC. This paper presents the purpose of this reagent feed system, provides background related to LLNL's low-level/mixed waste treatment processes, describes the major system components, outlines system operation, and discusses current status and plans

  6. Isobutane Made Practical as a Reagent Gas for Chemical Ionization Mass Spectrometry

    Science.gov (United States)

    Newsome, G. Asher; Steinkamp, F. Lucus; Giordano, Braden C.

    2016-08-01

    As a reagent gas for positive- and negative-mode chemical ionization mass spectrometry (CI-MS), isobutane (i-C4H10) produces superior analyte signal abundance to methane. Isobutane has never been widely adopted for CI-MS because it fouls the ion source more rapidly and produces positive CI spectra that are more strongly dependent on reagent gas pressure compared with methane. Isobutane was diluted to various concentrations in argon for use as a reagent gas with an unmodified commercial gas chromatograph-mass spectrometer. Analyte spectra were directly compared using methane, isobutane, and isobutane/argon mixtures. A mixture of 10% i-C4H10 in argon produced twice the positive-mode analyte signal of methane, equal to pure isobutane, and reduced spectral dependence on reagent gas pressure. Electron capture negative chemical ionization using 1% i-C4H10 in argon tripled analyte signal compared with methane and was reproducible, unlike pure isobutane. The operative lifetime of the ion source using isobutane/argon mixtures was extended exponentially compared with pure isobutane, producing stable and reproducible CI signal throughout. By diluting the reagent gas in an inert buffer gas, isobutane CI-MS experiments were made as practical to use as methane CI-MS experiments but with superior analytical performance.

  7. Effect of Reagents Concentration and Ratio on Degradation of Natural Rubber Latex in Acidic Medium

    International Nuclear Information System (INIS)

    The molecular weight of natural rubber (NR) was reduced via degradation to liquid natural rubber (LNR) using hydrogen peroxide and sodium nitrite as reagents in latex solution. In this study, the reaction was carried out in an acidic medium at 70 degree Celsius at various ratio and concentration of reagents. Results showed that the properties of degraded product for example LNR depends on the concentration and ratio of the reagents added into reaction mixtures. Increasing the concentration of hydrogen peroxide and sodium nitrite as reagents at 1 to 1 ratio efficiently reduced the molecular weight of LNR, but the gel content increased when reagents were added more than 0.2 mol. Hydrogen peroxide was found to have greater effect on degradation reaction compared to sodium nitrite when excessive amount of hydrogen peroxide showed further reduction in molecular weight of LNR. The degradation reaction also resulted in the formation of certain functional groups such as hydroxyl and carbonyl as shown from spectroscopy microstructure analysis. (author)

  8. Affinity reagents for studying histone modifications & guidelines for their quality control.

    Science.gov (United States)

    Kungulovski, Goran; Mauser, Rebekka; Jeltsch, Albert

    2015-10-01

    Histone post-translational modifications (PTMs) have pivotal functions in many chromatin processes, which makes their detection and characterization an imperative in chromatin biology. The established approaches for histone PTM characterization are generally based on affinity reagents specific for modified histone tails such as antibodies and, most recently, recombinant reading domains. Hence, the proper performance of these reagents is a critical precondition for the validity of the generated experimental data. In this review, we evaluate and update the quality criteria for assessment of the binding specificity of histone PTM affinity reagents. In addition, we discuss in detail the advantages and pitfalls of using antibodies and recombinant reading domains in chromatin biology research. Reading domains provide key advantages, such as consistent quality and recombinant production, but the future will tell if this emerging technology keeps its promises. PMID:26541466

  9. Organophosphorus reagents in actinide separations: Unique tools for production, cleanup and disposal

    Energy Technology Data Exchange (ETDEWEB)

    Nash, K. L.

    2000-01-12

    Interactions of actinide ions with phosphate and organophosphorus reagents have figured prominently in nuclear science and technology, particularly in the hydrometallurgical processing of irradiated nuclear fuel. Actinide interactions with phosphorus-containing species impact all aspects from the stability of naturally occurring actinides in phosphate mineral phases through the application of the bismuth phosphate and PUREX processes for large-scale production of transuranic elements to the development of analytical separation and environment restoration processes based on new organophosphorus reagents. In this report, an overview of the unique role of organophosphorus compounds in actinide production, disposal, and environment restoration is presented. The broad utility of these reagents and their unique chemical properties is emphasized.

  10. Reactivity of basic zirconium sulfate during interaction with carbonate, oxalate and phosphate reagents

    International Nuclear Information System (INIS)

    Methods of potentiometry and chemical analysis are used to study basic zirconium sulfate (BZS) interaction with carbonate (Na2CO3, NaHCO3), phosphate (Na3PO4, Na2HPO4, NaH2PO4, H3PO4) and oxalate ((NH4)2C2O4xH2O) reagents. Depending on conditions two different BZS - BZS-1 and BZS-2 are obtained. It is shown that BZS reactivity is defined by the possibility of substitution of oxo- and hydroxoligands and is decreased by increase of its deposition temperature. BZS-1 interaction with carbonate and oxalate reagents takes place at 25 deg C without changing basicity, and with phosphate reagents with basicity decrease up to formation of monophosphate which basicity is about 20%. During BZC-2 interaction oxo- and hydroxo-groups may be completely substituted for acidoligands with formation of nonhydrolysed compounds

  11. Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics

    Science.gov (United States)

    Deng, Jiu-shuai; Wen, Shu-ming; Deng, Jian-ying; Wu, Dan-dan

    2015-03-01

    Sulfamic acid (SA), which possesses a zwitterionic structure, was applied as a leaching reagent for the first time for extracting copper from copper oxide ore. The effects of reaction time, temperature, particle size, reagent concentration, and stirring speed on this leaching were studied. The dissolution kinetics of malachite was illustrated with a three-dimensional diffusion model. A novel leaching effect of SA on malachite was eventually demonstrated. The leaching rate increased with decreasing particle size and increasing concentration, reaction temperature and stirring speed. The activation energy for SA leaching malachite was 33.23 kJ/mol. Furthermore, the effectiveness of SA as a new reagent for extracting copper from copper oxide ore was confirmed by experiment. This approach may provide a solution suitable for subsequent electrowinning. In addition, results reported herein may provide basic data that enable the leaching of other carbonate minerals of copper, zinc, cobalt and so on in an SA system.

  12. Degradation of 4-Chlorophenol Solution by Synergetic Effect of Dual-frequency Ultrasound with Fenton Reagent

    Institute of Scientific and Technical Information of China (English)

    赵德明; 徐新华; 雷乐成; 汪大翚

    2005-01-01

    4-Chlorophenol (4-CP) solution was treated by dual-frequency ultrasound in conjunction with Fenton reagent, and obvious improvement in the 4-CP degradation rate was observed in this advanced oxidation process.Experimental results showed that ultrasonic intensity, saturating gas and pH value affected greatly the 4-CP removal rate. Among four different saturating gases (Ar, 02, air and N2), 4-CP degradation with Ar-saturated solution was the best. However, in the view of practical wastewater treatment, using oxygen as the saturating gas would be more economical. The addition of Fenton reagent followed the first-order kinetics and increased the 4-CP degradation rate.The 4-CP removal rate increased by around 126% within 15 rain treatment. The synergetic effect of dual-frequency ultrasound with Fenton reagent on 4-CP degradation was obviously observed.

  13. Genotoxicity assessment of membrane concentrates of landfill leachate treated with Fenton reagent and UV-Fenton reagent using human hepatoma cell line.

    Science.gov (United States)

    Wang, Guifang; Lu, Gang; Yin, Pinghe; Zhao, Ling; Yu, Qiming Jimmy

    2016-04-15

    Membrane concentrates of landfill leachates contain organic and inorganic contaminants that could be highly toxic and carcinogenic. In this paper, the genotoxicity of membrane concentrates before and after Fenton and UV-Fenton reagent was assessed. The cytotoxicity and genotoxicity was determined by using the methods of methyltetrazolium (MTT), cytokinesis-block micronucleus (CBMN) and comet assay in human hepatoma cells. MTT assay showed a cytotoxicity of 75% after 24h of exposure to the highest tested concentration of untreated concentrates, and no cytotoxocity for UV-Fenton and Fenton treated concentrates. Both CBMN and comet assays showed increased levels of genotoxicity in cells exposed to untreated concentrates, compared to those occurred in cells exposed to UV-Fenton and Fenton reagent treated concentrates. There was no significant difference between negative control and UV-Fenton treated concentrates for micronucleus and comet assay parameters. UV-Fenton and Fenton treatment, especially the former, were effective methods for degradation of bisphenol A and nonylphenol in concentrates. These findings showed UV-Fenton and Fenton reaction were effective methods for treatment of such complex concentrates, UV-Fenton reagent provided toxicological safety of the treated effluent, and the genotoxicity assays were found to be feasible tools for assessment of toxicity risks of complex concentrates. PMID:26780702

  14. Cobalt-Catalyzed Vinylation of Organozinc Reagents with Aldehydes

    Institute of Scientific and Technical Information of China (English)

    WANG; JinXian

    2001-01-01

    Transtion metal catalyzed vinylation of organic halides are known to be a very convenient method for forming carbon-carbon bonds at unsubstituted vinylic position. The versatility of stilbenes is well known because of its various biological active components, the variety of its reactions in organic syntheses, and its ability to function as a bonding partner for metals in complexes.  Many methods have been described for the synthesis of stilbenes. The reduction, dehydrogenation, and elimination reactions leading to stilbenes without formation of new carbon-carbon bonds are known to be a very convenient methods. Synthetically more important are the dimerization reactions: oxidative or eleminative dimerization of a suitable methylarene often constitutes the method of choice for the preparation of a symmetric stilbene. Meerwein arylation and Heck reaction are prominent examples for the synthesis of stilbenes from arenes and styrenes. Moreover, condensation reactions of a nucleophilic with an electrophilic arylmethyl compound include Knoevenagel type reactions and the very general Wittig and Wittig-Horner reactions are also known methods.  ……

  15. Statistical validation of reagent lot change in the clinical chemistry laboratory can confer insights on good clinical laboratory practice.

    Science.gov (United States)

    Cho, Min-Chul; Kim, So Young; Jeong, Tae-Dong; Lee, Woochang; Chun, Sail; Min, Won-Ki

    2014-11-01

    Verification of new lot reagent's suitability is necessary to ensure that results for patients' samples are consistent before and after reagent lot changes. A typical procedure is to measure results of some patients' samples along with quality control (QC) materials. In this study, the results of patients' samples and QC materials in reagent lot changes were analysed. In addition, the opinion regarding QC target range adjustment along with reagent lot changes was proposed. Patients' sample and QC material results of 360 reagent lot change events involving 61 analytes and eight instrument platforms were analysed. The between-lot differences for the patients' samples (ΔP) and the QC materials (ΔQC) were tested by Mann-Whitney U tests. The size of the between-lot differences in the QC data was calculated as multiples of standard deviation (SD). The ΔP and ΔQC values only differed significantly in 7.8% of the reagent lot change events. This frequency was not affected by the assay principle or the QC material source. One SD was proposed for the cutoff for maintaining pre-existing target range after reagent lot change. While non-commutable QC material results were infrequent in the present study, our data confirmed that QC materials have limited usefulness when assessing new reagent lots. Also a 1 SD standard for establishing a new QC target range after reagent lot change event was proposed.

  16. Pre-storage of gelified reagents in a lab-on-a-foil system for rapid nucleic acid analysis

    DEFF Research Database (Denmark)

    Yi, Sun; Høgberg, Jonas; Christine, Thanner;

    2013-01-01

    Reagent pre-storage in a microfluidic chip can enhance operator convenience, simplify the system design, reduce the cost of storage and shipment, and avoid the risk of cross-contamination. Although dry reagents have long been used in lateral flow immunoassays, they have rarely been used for nucleic...... acid-based point-of-care (POC) assays due to the lack of reliable techniques to dehydrate and store fragile molecules involved in the reaction. In this study, we describe a simple and efficient method for prolonged on-chip storage of PCR reagents. The method is based on gelification of all reagents...

  17. Morphological investigations of cells that adhered to the irregular patterned polydimethylsiloxane (PDMS) surface without reagents.

    Science.gov (United States)

    Chung, Sung Hee; Min, Junhong

    2009-07-01

    Polydimethylsiloxane (PDMS) surface consisting irregular pattern was investigated to develop cell-based biochip using PDMS. PDMS surface was modified with nano- and micro-combined patterns using surface deformation technology. Hydrophobicity of nano-patterned PDMS surface was sustained. Nevertheless it has irregular patterns consisting of micro- and nano-patterns. According to atomic force microscopy (AFM), scanning electron microscopy (SEM) and confocal microscopy results by immunostaining method, human mammary epithelial cells (HMEC) adhered well on irregularly patterned surface without any reagents such as gelatin and collagen, compared to commercial culture dish. It implies PDMS material can be utilized as template for cell-based biochip without any reagents. PMID:19427124

  18. SPECTROPHOTOMETRIC DETERMINATION OF CEPHALEXIN USING NINHYDRIN REAGENT IN TABLET DOSAGE FORM

    Directory of Open Access Journals (Sweden)

    Patel Satish A

    2011-09-01

    Full Text Available A simple, sensitive, accurate, precise and economical visible spectrophotometric method was developed and validated for the estimation of cephalexin in tablets. The method is based on the reaction of cephalexin with ninhydrin reagent in methanol giving blue color chromogen, which shows maximum absorbance at 576 nm against reagent blank. The chromogen obeyed Beer’s law in the concentration range of 5-60 µg/ml for cephalexin. The results of the analysis have been validated statistically and by recovery studies.

  19. Enantioselective copper catalyzed allylic alkylation using Grignard reagents; Applications in synthesis

    NARCIS (Netherlands)

    Zijl, Anthoni Wouter van

    2009-01-01

    Enantioselective copper catalyzed allylic alkylation is a powerful carbon-carbon bond forming reaction. In this thesis the development of a new catalyst for the use of Grignard reagents in this reaction is described. This catalyst is based on copper and the ligand Taniaphos. The high regio- and enan

  20. A mild and efficient method for nucleophilic aromatic fluorination using tetrabutylammonium fluoride as fluorinating reagent

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Anhydrous tetrabutylammonium fluoride(TBAF_(anh).) has been found to be a highly efficient fluorinating reagent for nucleophilic aromatic fluorinations such as fluorodenitration or halogen exchange(Halex) reaction.The products were formed in high to excellent yields under surprisingly mild reaction conditions and no phenol or ether side-products were detected in these reactions.

  1. Privatization and Sponsorship: The Re-Agenting of the School System in England

    Science.gov (United States)

    Hatcher, Richard

    2006-01-01

    In this article I use the concept of "re-agenting" to explore and explain the role of non-state agencies, principally private companies and business entrepreneurs, as key instruments in the government's transformation of the school system in England. Their role takes both for-profit and not-for-profit forms. The outsourcing to private companies of…

  2. Dosage delivery of sensitive reagents enables glove-box-free synthesis

    Science.gov (United States)

    Sather, Aaron C.; Lee, Hong Geun; Colombe, James R.; Zhang, Anni; Buchwald, Stephen L.

    2015-08-01

    Contemporary organic chemists employ a broad range of catalytic and stoichiometric methods to construct molecules for applications in the material sciences, and as pharmaceuticals, agrochemicals, and sensors. The utility of a synthetic method may be greatly reduced if it relies on a glove box to enable the use of air- and moisture-sensitive reagents or catalysts. Furthermore, many synthetic chemistry laboratories have numerous containers of partially used reagents that have been spoiled by exposure to the ambient atmosphere. This is exceptionally wasteful from both an environmental and a cost perspective. Here we report an encapsulation method for stabilizing and storing air- and moisture-sensitive compounds. We demonstrate this approach in three contexts, by describing single-use capsules that contain all of the reagents (catalysts, ligands, and bases) necessary for the glove-box-free palladium-catalysed carbon-fluorine, carbon-nitrogen, and carbon-carbon bond-forming reactions. This strategy should reduce the number of error-prone, tedious and time-consuming weighing procedures required for such syntheses and should be applicable to a wide range of reagents, catalysts, and substrate combinations.

  3. Postsynthetic modification of an amino-tagged MOF using peptide coupling reagents: a comparative study.

    Science.gov (United States)

    Hintz, Henrik; Wuttke, Stefan

    2014-10-01

    The suitability of four peptide coupling reagents for postsynthetic modification (PSM) of amino-tagged metal-organic frameworks (MOFs) with carboxylic acids was investigated. Mild reaction conditions at room temperature allow effective covalent attachment of drugs and biomolecules inside the pores of MOFs with moderate chemical stability.

  4. Simulation and Experiment Research of Non-contact Micro-liquid Reagent Dispensing

    Directory of Open Access Journals (Sweden)

    Yao Yufeng

    2013-05-01

    Full Text Available With the development of biological analytical techniques and high throughput screening techniques, a large number of automated biological agents dispensing systems are widely used in the field of life science research. Non-contact dispensing method characterized by its small dispensing volume, high dispensing precision and quick service speed which satisfies the requirements of biological agent’s distribution, becomes the mainstream dispensing method used in reagent dispensing systems. However, the difficult control way, complex system of non-contact dispensing method and its vulnerable dispensing process, which can be easily affected by characteristics of the agent, have hindered the application and development of the method. In this study, simulation model of the separation process of micro scale biological reagent are constructed in order to solve the above problems. The prerequisites of the non-contact dispensing method, the relationship between dispensing volume and precision and characteristics of reagents, formation of system and control parameters are researched through theoretical analysis and numerical simulations. The experiment results are quite consistent with the simulation results; therefore it well verifies the reliability of the modeling and simulation method and also lays a firm theoretical foundation for the system design of non-contact micro-liquid reagent distribution and control optimization.

  5. Palladium-Catalysed Direct Cross-Coupling of Organolithium Reagents with Aryl and Vinyl Triflates

    NARCIS (Netherlands)

    Vila, Carlos; Hornillos, Valentin; Giannerini, Massimo; Fananas-Mastral, Martin; Feringa, Bernard L.

    2014-01-01

    Carbon-Carbon Bond Formation Carbon-carbon bond formation by the cross-coupling of highly reactive organolithium reagents is a major challenge. Recently, it was demonstrated that palladium catalysts are able to couple organic halides with various organolithium species under mild conditions in a high

  6. 21 CFR 866.3390 - Neisseria spp. direct serological test reagents.

    Science.gov (United States)

    2010-04-01

    ... microorganisms. The device does not include products for the detection of gonorrhea in humans by indirect methods... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Neisseria spp. direct serological test reagents. 866.3390 Section 866.3390 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND...

  7. Reactivity of lignin and problems of its oxidative destruction with peroxy reagents

    International Nuclear Information System (INIS)

    Published data on reactivity and oxidation of lignin and model compounds with hydrogen peroxide, ozone and chlorine dioxide as well as on oxidative destruction of the sulfate pulp lignin with various reagents during bleaching are systematised and generalised. Concepts of lignin activation towards its selective oxidation and kinetic features of sulfate pulp oxidative delignification are considered. The bibliography includes 157 references.

  8. Gas-Phase Amidation of Carboxylic Acids with Woodward's Reagent K Ions

    Science.gov (United States)

    Peng, Zhou; Pilo, Alice L.; Luongo, Carl A.; McLuckey, Scott A.

    2015-06-01

    Gas-phase amidation of carboxylic acids in multiply-charged peptides is demonstrated via ion/ion reactions with Woodward's reagent K (wrk) in both positive and negative mode. Woodward's reagent K, N-ethyl-3-phenylisoxazolium-3'-sulfonate, is a commonly used reagent that activates carboxylates to form amide bonds with amines in solution. Here, we demonstrate that the analogous gas-phase chemistry occurs upon reaction of the wrk ions and doubly protonated (or doubly deprotonated) peptide ions containing the carboxylic acid functionality. The reaction involves the formation of the enol ester intermediate in the electrostatic complex. Upon collisional activation, the ethyl amine on the reagent is transferred to the activated carbonyl carbon on the peptide, resulting in the formation of an ethyl amide (addition of 27 Da to the peptide) with loss of a neutral ketene derivative. Further collision-induced dissociation (CID) of the products and comparison with solution-phase amidation product confirms the structure of the ethyl amide.

  9. Benzyltrifluoromethyl (or Fluoroalkyl) Selenide: Reagent for Electrophilic Trifluoromethyl (or Fluoroalkyl) Selenolation.

    Science.gov (United States)

    Glenadel, Quentin; Ismalaj, Ermal; Billard, Thierry

    2016-09-16

    Trifluoromethylseleno substituent (CF3Se) is an emerging group, but its direct introduction onto organic molecules is still quite limited and mainly restricted to nucleophilic methods. Herein, we describe a new approach to easily and safely perform electrophilic trifluoromethylselenolation starting from a simple and easily accessible reagent, namely, benzyltrifluoromethyl selenide. This strategy can be generalized to various fluoroalkylselanyl groups, even functionalized ones. PMID:27571314

  10. Copper-catalyzed trifluoromethylation of arylsulfinate salts using an electrophilic trifluoromethylation reagent

    KAUST Repository

    Lin, Xiaoxi

    2013-03-01

    A copper-catalyzed method for the trifluoromethylation of arylsulfinates with Togni\\'s reagent has been developed, affording aryltrifluoromethylsulfones in moderate to good yields. A wide range of functional groups in arylsulfinates are compatible with the reaction conditions. © 2013 Elsevier Ltd. All rights reserved.

  11. Statistical assessment of DNA extraction reagent lot variability in real-time quantitative PCR

    Science.gov (United States)

    Bushon, R.N.; Kephart, C.M.; Koltun, G.F.; Francy, D.S.; Schaefer, F. W.; Lindquist, H.D. Alan

    2010-01-01

    Aims: The aim of this study was to evaluate the variability in lots of a DNA extraction kit using real-time PCR assays for Bacillus anthracis, Francisella tularensis and Vibrio cholerae. Methods and Results: Replicate aliquots of three bacteria were processed in duplicate with three different lots of a commercial DNA extraction kit. This experiment was repeated in triplicate. Results showed that cycle threshold values were statistically different among the different lots. Conclusions: Differences in DNA extraction reagent lots were found to be a significant source of variability for qPCR results. Steps should be taken to ensure the quality and consistency of reagents. Minimally, we propose that standard curves should be constructed for each new lot of extraction reagents, so that lot-to-lot variation is accounted for in data interpretation. Significance and Impact of the Study: This study highlights the importance of evaluating variability in DNA extraction procedures, especially when different reagent lots are used. Consideration of this variability in data interpretation should be an integral part of studies investigating environmental samples with unknown concentrations of organisms. ?? 2010 The Society for Applied Microbiology.

  12. Dried reagents for multiplex genotyping by tag-array minisequencing to be used in microfluidic devices

    DEFF Research Database (Denmark)

    Ahlford, Annika; Kjeldsen, Bastian; Reimers, Jakob;

    2010-01-01

    was carried out with freeze-dried reagents stored in reaction chambers fabricated by micromilling in a cyclic olefin copolymer substrate. The results reported in this study are a key step towards the development of an integrated microfluidic device for point-of-care DNA-based diagnostics....

  13. Recyclable bio-reagent for rapid and selective extraction of contaminants from soil

    Energy Technology Data Exchange (ETDEWEB)

    Lomasney, H.L. [ISOTRON Corp., New Orleans, LA (United States)

    1997-10-01

    This Phase I Small Business Innovation Research program is confirming the effectiveness of a bio-reagent to cost-effectively and selectively extract a wide range of heavy metals and radionuclide contaminants from soil. This bioreagent solution, developed by ISOTRON{reg_sign} Corporation (New Orleans, LA), is flushed through the soil and recycled after flowing through an electrokinetic separation module, also developed by ISOTRON{reg_sign}. The process is ex situ, and the soil remains in its transport container through the decontamination process. The transport container can be a fiberglass box, or a bulk bag or {open_quotes}super sack.{close_quotes} Rocks, vegetation, roots, etc. need not be removed. High clay content soils are accommodated. The process provides rapid injection of reagent solution, and when needed, sand is introduced to speed up the heap leach step. The concentrated waste form is eventually solidified. The bio-reagent is essentially a natural product, therefore any solubizer residual in soil is not expected to cause regulatory concern. The Phase I work will confirm the effectiveness of this bio-reagent on a wide range of contaminants, and the engineering parameters that are needed to carry out a full-scale demonstration of the process. ISOTRON{reg_sign} scientists will work with contaminated soil from Los Alamos National Laboratory. LANL is in the process of decontaminating and decommissioning more than 300 sites within its complex, many of which contain heavy metals or radionuclides; some are mixed wastes containing TCE, PCB, and metals.

  14. Efficient photolytic C-H bond functionalization of alkylbenzene with hypervalent iodine(iii) reagent.

    Science.gov (United States)

    Sakamoto, Ryu; Inada, Tsubasa; Selvakumar, Sermadurai; Moteki, Shin A; Maruoka, Keiji

    2016-03-01

    A practical approach to radical C-H bond functionalization by the photolysis of a hypervalent iodine(iii) reagent is presented. The photolysis of [bis(trifluoroacetoxy)iodo]benzene (PIFA) leads to the generation of trifluoroacetoxy radicals, which allows the smooth transformation of various alkylbenzenes to the corresponding benzyl ester compounds under mild reaction conditions. PMID:26686276

  15. Modular Approach to 9-Monosubstituted Fluorene Derivatives Using Mo(V) Reagents.

    Science.gov (United States)

    Franzmann, Peter; Trosien, Simon; Schubert, Moritz; Waldvogel, Siegfried R

    2016-03-01

    Oxidative coupling using molybdenum(V) reagents provides fast access to highly functionalized 9-monosubstituted fluorenes. This synthetic approach is highly modular, is high yielding, and tolerates a variety of labile moieties, e.g. amides or iodo groups. The established protocol leads to promising precursors for pharmacologically important analogues of melatonin. PMID:26913835

  16. Halocyclization of Unsaturated Guanidines Mediated by Koser's Reagent and Lithium Halides.

    Science.gov (United States)

    Daniel, Marion; Blanchard, Florent; Nocquet-Thibault, Sophie; Cariou, Kevin; Dodd, Robert H

    2015-11-01

    The synthesis of halogenated cyclic guanidines through iodine(III)-mediated umpolung of halide salts is described. Cyclic guanidines of various sizes can be obtained with generally excellent regioselectivities through either a chloro- or a bromocyclization, using Koser's reagent and the corresponding lithium salt. PMID:26492553

  17. Trapping Reactive Intermediates by Mechanochemistry: Elusive Aryl N-Thiocarbamoylbenzotriazoles as Bench-Stable Reagents.

    Science.gov (United States)

    Štrukil, Vjekoslav; Gracin, Davor; Magdysyuk, Oxana V; Dinnebier, Robert E; Friščić, Tomislav

    2015-07-13

    Monitoring of mechanochemical thiocarbamoylation by in situ Raman spectroscopy revealed the formation of aryl N-thiocarbamoylbenzotriazoles, reactive intermediates deemed unisolable in solution. The first-time isolation and structural characterization of these elusive molecules demonstrates the ability of mechanochemistry to access otherwise unobtainable intermediates and offers a new range of masked isothiocyanate reagents.

  18. Evaluation of Enoyl-Acyl Carrier Protein Reductase Inhibitors as Pseudomonas aeruginosa Quorum-Quenching Reagents

    DEFF Research Database (Denmark)

    Yang, Liang; Liu, Yang; Sternberg, Claus;

    2010-01-01

    which block the quorum-sensing process can facilitate development of novel treatment strategies for P. aeruginosa infections. We have used molecular dynamics simulation and experimental studies to elucidate the efficiencies of two potential quorum-quenching reagents, triclosan and green tea...

  19. Conservative solute approximation to the transport of a remedial reagent in a vertical circulation flow field

    Science.gov (United States)

    Chen, Jui-Sheng; Jang, Cheng-Shin; Cheng, Chung-Ting; Liu, Chen-Wuing

    2010-09-01

    SummaryThis study presents a novel mathematical model for describing the transport of the remedial reagent in a vertical circulation flow field in an anisotropic aquifer. To develop the mathematical model, the radial and vertical components of the pore water velocity are calculated first by using an analytical solution for steady-state drawdown distribution near a vertical circulation well. Next, the obtained radial and vertical components of the pore water velocity are then incorporated into a three-dimensional axisymmetrical advection-dispersion equation in cylindrical coordinates from which to build the reagent transport equation. The Laplace transform finite difference technique is applied to solve the three-dimensional axisymmetrical advection-dispersion equation with spatial variable-dependent coefficients. The developed mathematical model is used to investigate the effects of various parameters such as hydraulic conductivity anisotropy, longitudinal and transverse dispersivities, the placement of the extraction and injection screened intervals of the vertical circulation well and the injection modes on the transport regime of the remedial reagent. Results show that those parameters have different degrees of impacts on the distribution of the remedial reagent. The mathematical model provides an effective tool for designing and operating an enhanced groundwater remediation in an anisotropic aquifer using the vertical circulation well technology.

  20. One pot direct synthesis of amides or oxazolines from carboxylic acids using Deoxo-Fluor reagent

    OpenAIRE

    Kangani, Cyrous O.; Kelley, David E.

    2005-01-01

    A mild and highly efficient one pot–one step condensation and/or condensation–cyclization of various acids to amides and/or oxazolines using Deoxo-Fluor reagents is described. Parallel syntheses of various free fatty acids with 2-amino-2, 2-dimethyl-1-propanol resulted with excellent yields.

  1. Nanoporous magnesium aluminometasilicate tablets for precise, controlled, and continuous dosing of chemical reagents and catalysts

    DEFF Research Database (Denmark)

    Ruhland, T.; Nielsen, S.D.; Holm, P.;

    2007-01-01

    Mechanically robust tablets of nanoporous magnesium aluminometasilicate with high surface area and porosity can be loaded with a variety of organic and inorganic reagents and catalysts. The scope of this novel dosing methodology is demonstrated through the evaluation of 14 diverse organic reactions...

  2. Evaluation of standard reagents for radial-immunodiffusion assays. In vitro control of rabies vaccines

    Directory of Open Access Journals (Sweden)

    MICELI Graciela S.

    2000-01-01

    Full Text Available The RID assay is one of the in vitro methods used for in-process control in the production of rabies vaccines for veterinary use. It has been shown to be very useful for determining antigen concentration in the final bulk product. The work presented in this paper, including the production and standardization of candidate standard reagents for use in the Radial Immunodiffusion Assay (RID was carried out at the Pan American Institute for Food Protection and Zoonoses (INPPAZ/PAHO/WHO. The study was completed with the cooperation of the Faculty of Veterinary Sciences, National University of La Plata (NULP, Argentina, where the validation of the proposed standards and the quality control of samples from 28 different batches of rabies vaccines produced with Pasteur strain rabies virus (PV in BHK cells were performed. The activity of the vaccines was determined by in vivo (NIH and in vitro (RIDassays. The results of the candidate reagents for the reagent standardization tests showed stability, sensitivity and reproducibility. The Relative Potency the 1.2 between the problem vaccines and the reference vaccine was estimated by variance and regression analysis. The results of our validation study show that the INPPAZ (PAHO/WHO is capable of producing and distributing the above-mentioned standard reagents, as well as of providing support for the incorporation of the RID technique (sensitive, rapid and inexpensive to the laboratories that manufacture rabies vaccines in Latin America and the Caribbean.

  3. Mild copper-catalyzed trifluoromethylation of terminal alkynes using an electrophilic trifluoromethylating reagent

    KAUST Repository

    Weng, Zhiqiang

    2012-03-01

    A catalytic process for trifluoromethylation of terminal alkynes with Togni\\'s reagent has been developed, affording trifluoromethylated acetylenes in good to excellent yields. The reaction is conducted at room temperature and exhibits tolerance to a range of functional groups. © 2012 Elsevier Ltd. All rights reserved.

  4. Iodine-catalyzed thiolation of electron-rich aromatics using sulfonyl hydrazides as sulfenylation reagents.

    Science.gov (United States)

    Zhao, Xia; Li, Tianjiao; Zhang, Lipeng; Lu, Kui

    2016-01-21

    Iodine-catalyzed thiolation of electron-rich aromatics, including substituted anisole, thioanisole, phenol, toluene, and naphthalene, using sulfonyl hydrazides as sulfenylation reagents was carried out. Sulfonothioates, the products of decomposition of sulfonyl hydrazides in the presence of iodine, are proposed as the major sulfenylation species in this transformation.

  5. Lipid-based Transfection Reagents Exhibit Cryo-induced Increase in Transfection Efficiency

    NARCIS (Netherlands)

    Sork, Helena; Nordin, Joel Z; Turunen, Janne J; Wiklander, Oscar Pb; Bestas, Burcu; Zaghloul, Eman M; Margus, Helerin; Padari, Kärt; Duru, Adil D; Corso, Giulia; Bost, Jeremy; Vader, Pieter; Pooga, Margus; Smith, Ci Edvard; Wood, Matthew Ja; Schiffelers, Raymond M; Hällbrink, Mattias; Andaloussi, Samir El

    2016-01-01

    The advantages of lipid-based transfection reagents have permitted their widespread use in molecular biology and gene therapy. This study outlines the effect of cryo-manipulation of a cationic lipid-based formulation, Lipofectamine 2000, which, after being frozen and thawed, showed orders of magnitu

  6. Enantioselective Addition of Organolithium Reagents to Imines Mediated by C2-Symmetric Bis(aziridine) Ligands

    DEFF Research Database (Denmark)

    Johansson, F.; Tanner, David Ackland

    1998-01-01

    The C-2-symmetric bis(aziridine) ligands 1 - 5 have been screened in the enantioselective addition of organolithium reagents to imines. Ligand 1 (used in stoichiometric amounts) was found to be superior in terms of chemical yield and enantioselectivity, the best result being 90% yield and 89% e.e...

  7. The retro Grignard addition reaction revisited: the reversible addition of benzyl reagents to ketones

    DEFF Research Database (Denmark)

    Christensen, Stig Holden; Holm, Torkil; Madsen, Robert

    2014-01-01

    The Grignard addition reaction is known to be a reversible process with allylic reagents, but so far the reversibility has not been demonstrated with other alkylmagnesium halides. By using crossover experiments it has been established that the benzyl addition reaction is also a reversible transfo...

  8. Silica triflate as an efficient reagent for the solvent-free synthesis of coumarins

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Silica triflate, as a new silica-based reagent, can be used for the efficient synthesis of 4-substituted coumarins via a Pechmann reaction under solvent-free reaction conditions. All reactions were performed at 80 ℃ in good to high yields.

  9. Metal Ions Extraction with Glucose Derivatives as Chelating Reagents in Supercritical Carbon Dioxide

    Institute of Scientific and Technical Information of China (English)

    Guo Chen YANG; Hai Jian YANG

    2006-01-01

    A series of glucose derivatives have been used as chelating reagents to extract metal ions in supercritical carbon dioxide. With perfluoro-1-octanesulfonic acid tetraethylammonium salt as additive, glucose derivatives were selective for Sr2+ and Pb2+ extraction in supercritical carbon dioxide.

  10. Palladium-catalysed direct cross-coupling of secondary alkyllithium reagents

    NARCIS (Netherlands)

    Vila, Carlos; Giannerini, Massimo; Hornillos, Valentin; Fananas-Mastral, Martin; Feringa, Ben L.

    2014-01-01

    Palladium-catalysed cross-coupling of secondary C(sp(3)) organometallic reagents has been a long-standing challenge in organic synthesis, due to the problems associated with undesired isomerisation or the formation of reduction products. Based on our recently developed catalytic C-C bond formation w

  11. Copper(I) mediated cross-coupling of amino acid derived organozinc reagents with acid chlorides

    DEFF Research Database (Denmark)

    Hjelmgaard, Thomas; Tanner, David Ackland

    2006-01-01

    This paper describes the development of a straightforward experimental protocol for copper-mediated cross-coupling of amino acid derived beta-amido-alkylzinc iodides 1 and 3 with a range of acid chlorides. The present method uses CuCN center dot 2LiCl as the copper source and for organozinc reagent...

  12. Diagnosis of Schistosomiasis by reagent strip test for detection of circulating cathodic antigen

    NARCIS (Netherlands)

    Dam, van G.J.; Wichers, J.H.; Falcao Ferreira, T.M.; Ghati, D.; Amerongen, van A.; Deelder, A.M.

    2004-01-01

    A newly developed reagent strip assay for the diagnosis of schistosomiasis based on parasite antigen detection in urine of infected individuals was evaluated. The test uses the principle of lateral flow through a nitrocellulose strip of the sample mixed with a colloidal carbon conjugate of a monoclo

  13. Ring-opening of cyclic ethers with carbon–carbon bond formation by Grignard reagents

    DEFF Research Database (Denmark)

    Christensen, Stig Holden; Holm, Torkil; Madsen, Robert

    2014-01-01

    The ring-opening of cyclic ethers with concomitant C–C bond formation was studied with a number of Grignard reagents. The transformation was performed in a sealed vial by heating to ∼160 °C in an aluminum block or at 180 °C in a microwave oven. Good yields of the product alcohols were obtained wi...

  14. A Stopped-Flow Kinetics Experiment for the Physical Chemistry Laboratory Using Noncorrosive Reagents

    Science.gov (United States)

    Prigodich, Richard V.

    2014-01-01

    Stopped-flow kinetics techniques are important to the study of rapid chemical and biochemical reactions. Incorporation of a stopped-flow kinetics experiment into the physical chemistry laboratory curriculum would therefore be an instructive addition. However, the usual reactions studied in such exercises employ a corrosive reagent that can over…

  15. Optimization of Gene Transfection in Murine Myeloma Cell Lines using Different Transfection Reagents.

    Science.gov (United States)

    Shabani, Mahdi; Hemmati, Sheyda; Hadavi, Reza; Amirghofran, Zahra; Jeddi-Tehrani, Mahmood; Rabbani, Hodjatallah; Shokri, Fazel

    2010-07-01

    Purification and isolation of cellular target proteins for monoclonal antibody (MAb) production is a difficult and time-consuming process. Immunization of mice with murine cell lines stably transfected with genes coding for xenogenic target molecules is an alternative method for mouse immunization and MAb production. Here we present data on transfection efficiency of some commercial reagents used for transfection of murine myeloma cell lines. Little is known about transfectability of murine myeloma cell lines by different transfection reagents. Mouse myeloma cell lines (SP2/0, NS0, NS1, Ag8, and P3U1) were transfected with pEGFP-N1 vector using Lipofectamine 2000, jetPEI and LyoVec commercial transfection reagents in different combinations. The transfection permissible HEK293-FT cell line was used as a control in transfection procedure. Transfected cells, expressing the Enhanced Green Fluorescent Protein (EGFP), were analyzed by flow cytometry 48 hrs post transfection. Our results showed transfection efficiency of 71%, 57% and 22% for HEK293-FT, 5.5%, 3.4% and 1% for SP2/0, 55.7%, 21.1% and 9.3% for NS0, 8.2%, 6% and 5.5% for NS1, 22%, 49.2% and 5.5% for Ag8 and 6.3%, 21.5% and 4.6% for P3U1 cell lines after transfection with Lipofectamine 2000, jetPEI and LyoVec reagents, respectively. Our data indicate that NS0 and Ag8 are efficiently transfected by Lipofectamine 2000 and jetPEI reagents. Finally, we propose Ag8 and NS0 cell lines as suitable host cells for efficient expression of target genes which can be used for mouse immunization and MAb production. PMID:23408356

  16. New Chiral Reagent for Installation of Pharmacophoric (S)- or (R)-2-(Alkoxyphosphono)-1-amino-2,2-difluoroethyl Groups.

    Science.gov (United States)

    Xie, Chen; Zhang, Lijun; Mei, Haibo; Pajkert, Romana; Ponomarenko, Maksym; Pan, Yi; Röschenthaler, Gerd-Volker; Soloshonok, Vadim A; Han, Jianlin

    2016-05-17

    A new chiral reagent has been developed for generalized installation of pharmacophoric (S)- or (R)-2-(alkoxyphosphono)-1-amino-2,2-difluoroethyl group into organic compounds. The original synthetic application of this new reagent is exemplified by Friedel-Crafts reactions with indoles, which proceed efficiently with excellent diastereoselectivity to give enantiomerically pure products. PMID:26952046

  17. A New Colorimetric Assay of Tabletop Sweeteners Using a Modified Biuret Reagent: An Analytical Chemistry Experiment for the Undergraduate Curriculum

    Science.gov (United States)

    Fenk, Christopher J.; Kaufman, Nathan; Gerbig, Donald G., Jr.

    2007-01-01

    A new, fast and effective colorimetric analysis of the artificial sweetener aspartame is presented for application in undergraduate laboratory courses. This new method incorporates the use of a modified biuret reagent for selective detection and analysis of aspartame in aqueous solutions. The modified reagent is less caustic than the traditional…

  18. Preparation of ethyl magnesium bromide for regiospecific analysis of triacylglycerols.

    Science.gov (United States)

    Ando, Yasuhiro; Tomita, Yuki; Haba, Yusuke

    2008-01-01

    This paper presents a procedure for preparation of a Grignard reagent, ethyl magnesium bromide, used for partial deacylation of triacylglycerols (TAG) in their regiospecific analysis. Magnesium turnings were reacted with ethereal solution of bromoethane in a screw-capped test tube to synthesize 2 mL of 1 M ethyl magnesium bromide. Continuously stirred with a vortex mixer, the reaction smoothly proceeded at room temperature. Regiospecific analysis of 1,3-distearoyl-2-oleoylglycerol using this product showed that fatty acid compositions of the sn-1(3) and sn-2 positions were contaminated by less than 2 mol% of fatty acids migrated from isomeric positions. The analyses of lard and cod liver/mackerel oil TAG showed typical distribution patterns of 16:0, 22:5n-3 and 22:6n-3 in pig and fish depot TAG. These results confirmed the view that the freshly prepared reagent is usable for regiospecific analysis of TAG.

  19. New route to enantiopure MalphaNP acid, a powerful resolution and chiral 1H NMR anisotropy reagent.

    Science.gov (United States)

    Naito, Junpei; Taji, Hiromi; Sekiguchi, Satoshi; Watanabe, Miwa; Kuwahara, Shunsuke; Watanabe, Masataka; Harada, Nobuyuki

    2007-05-15

    MalphaNP acid (+/-)-1, 2-methoxy-2-(1-naphthyl)propionic acid, was enantioresolved by the use of phenylalaninol (S)-(-)-4; a diastereomeric mixture of amides formed from acid (+/-)-1 and amine (S)-(-)-4 was easily separated by fractional recrystallization and/or HPLC on silica gel, yielding amides (R;S)-(-)-5a and (S;S)-(+)-5b. Their absolute configurations were determined by X-ray crystallography by reference to the S configuration of the phenylalaninol moiety. Amide (R;S)-(-)-5a was converted to oxazoline (R;S)-(+)-8a, from which enantiopure MalphaNP acid (R)-(-)-1 was recovered. In a similar way, enantiopure MalphaNP acid (S)-(+)-1 was obtained from amide (S;S)-(+)-5b. These reactions provide a new route for the large-scale preparation of enantiopure MalphaNP acid, a powerful chiral reagent for the enantioresolution of alcohols and simultaneous determination of their absolute configurations by (1)H NMR anisotropy. PMID:17354261

  20. Determination of dopamine in presence of ascorbic acid and uric acid using poly (Spands Reagent) modified carbon paste electrode.

    Science.gov (United States)

    Veera Manohara Reddy, Y; Prabhakara Rao, V; Vijaya Bhaskar Reddy, A; Lavanya, M; Venu, M; Lavanya, M; Madhavi, G

    2015-12-01

    In this paper, we have fabricated a modified carbon paste electrode (CPE) by electropolymerisation of spands reagent (SR) onto surface of CPE using cyclic voltammetry (CV). The developed electrode was abbreviated as poly(SR)/CPE and the surface morphology of the modified electrode was studied by using scanning electron microscopy (SEM). The developed electrode showed higher electrocatalytic properties towards the detection of dopamine (DA) in 0.1M phosphate buffer solution (PBS) at pH7.0. The effect of pH, scan rate, accumulation time and concentration of dopamine was studied at poly(SR)/CPE. The poly(SR)/CPE was successfully used as a sensor for the selective determination of DA in presence of ascorbic acid (AA) and uric acid (UA) without any interference. The poly(SR)/CPE showed a good detection limit of 0.7 μM over the linear dynamic range of 1.6 μM to 16 μM, which is extremely lower than the reported methods. The prepared poly(SR)/CPE exhibited good stability, high sensitivity, better reproducibility, low detection limit towards the determination of DA. The developed method was also applied for the determination of DA in real samples. PMID:26354279

  1. Solution preparation

    International Nuclear Information System (INIS)

    Reviewed in this statement are methods of preparing solutions to be used in laboratory experiments to examine technical issues related to the safe disposal of nuclear waste from power generation. Each approach currently used to prepare solutions has advantages and any one approach may be preferred over the others in particular situations, depending upon the goals of the experimental program. These advantages are highlighted herein for three approaches to solution preparation that are currently used most in studies of nuclear waste disposal. Discussion of the disadvantages of each approach is presented to help a user select a preparation method for his particular studies. Also presented in this statement are general observations regarding solution preparation. These observations are used as examples of the types of concerns that need to be addressed regarding solution preparation. As shown by these examples, prior to experimentation or chemical analyses, laboratory techniques based on scientific knowledge of solutions can be applied to solutions, often resulting in great improvement in the usefulness of results

  2. Novel Easy Preparations of Some Aromatic Iodine(I, III, and V) Reagents, Widely Applied in Modern Organic Synthesis

    OpenAIRE

    Lech Skulski

    2003-01-01

    We report our novel (or considerably improved) methods for the synthesis of aromatic iodides, (dichloroiodo)arenes, (diacetoxyiodo)arenes, [bis(trifluoroacetoxy)-iodo]arenes, iodylarenes and diaryliodonium salts, as well as some facile, oxidative anion metatheses in crude diaryliodonium or tetraalkylammonium halides and, for comparison, potassium halides. All our formerly published papers were discussed and explained in our review “Organic Iodine(I, III, and V) Chemistry: 10 Years of Dev...

  3. Preparation of Amino-Modified PAN Fibers with Triethylenetetramine as Aminating Reagents and Their Application in CO2 Adsorption

    Directory of Open Access Journals (Sweden)

    Wenbo Zhao

    2014-01-01

    Full Text Available Amino-modified polyacrylonitrile (AMPAN fiber was synthesized by the reaction of polyacrylonitrile (PAN fiber and triethylenetetramine (TETA in the presence of water. The effect of water amount, reaction temperature, and time on the weight increase degree and alkali content of the AMPAN fiber was investigated in detail. The characterization results indicated that TETA could be grafted onto the surface of PAN fiber by this method. However, the highest adsorption capacity of the AMPAN fibers was only 0.09 g/g even at 15 bar and 50°C, which was much lower than the porous materials. The reason for this result may be related to its low surface area.

  4. Investigation on preparation of uranium tetrachloride from chlorinating uranium dioxide by carbon tetrachloride and its mixing reagents

    International Nuclear Information System (INIS)

    By studying the change of the temperature for gaseous space and solid layer within the reactor and improving structure of reactor and types of feed material stocked in the boat pan, it is possible to reduce the volatilization loss of uranium, allowing the uranium yield to rise above 97%. A further study found that chlorination of UO2 by using a mixture of CHCl3 + CCl4 can markedly reduce the volatilization loss of uranium chlorides, and the uranium yield is above 99%. The content of free carbon is less than 100 ppm in the product. A new chlorination process has been developed

  5. Novel Easy Preparations of Some Aromatic Iodine(I, III, and V Reagents, Widely Applied in Modern Organic Synthesis

    Directory of Open Access Journals (Sweden)

    Lech Skulski

    2003-01-01

    Full Text Available We report our novel (or considerably improved methods for the synthesis of aromatic iodides, (dichloroiodoarenes, (diacetoxyiodoarenes, [bis(trifluoroacetoxy-iodo]arenes, iodylarenes and diaryliodonium salts, as well as some facile, oxidative anion metatheses in crude diaryliodonium or tetraalkylammonium halides and, for comparison, potassium halides. All our formerly published papers were discussed and explained in our review “Organic Iodine(I, III, and V Chemistry: 10 Years of Development at the Medical University of Warsaw, Poland” (1990-2000 [1]. Our newest results are discussed below.

  6. Field detection of avian influenza virus in wild birds: evaluation of a portable rRT-PCR system and freeze-dried reagents

    Science.gov (United States)

    Takekawa, John Y.; Iverson, Samuel A.; Schultz, Annie K.; Hill, Nichola J.; Cardona, Carol J.; Boyce, Walter M.; Dudley, Joseph P.

    2010-01-01

    Wild birds have been implicated in the spread of highly pathogenic avian influenza (HPAIV) of the H5N1 subtype, prompting surveillance along migratory flyways. Sampling of wild birds is often conducted in remote regions, but results are often delayed because of limited local analytical capabilities, difficulties with sample transportation and permitting, or problems keeping samples cold in the field. In response to these challenges, the performance of a portable real-time, reverse transcriptase-polymerase chain reaction (rRT-PCR) unit (RAPID(Registered), Idaho Technologies, Salt Lake City, UT) that employed lyophilized reagents (Influenza A Target 1 Taqman; ASAY-ASY-0109, Idaho Technologies) was compared to virus isolation combined with real-time RT-PCR conducted in a laboratory. This study included both field and experimental-based sampling. Field samples were collected from migratory shorebirds captured in northern California, while experimental samples were prepared by spiking fecal material with an H6N2 AIV isolate. Results indicated that the portable rRT-PCR unit had equivalent specificity to virus isolation with no false positives, but sensitivity was compromised at low viral titers. Use of portable rRT-PCR with lyophilized reagents may expedite surveillance results, paving the way to a better understanding of wild bird involvement in HPAIV H5N1 transmission.

  7. Aromatic and heterocyclic perfluoroalkyl sulfides. Methods of preparation

    Directory of Open Access Journals (Sweden)

    Vladimir N. Boiko

    2010-08-01

    Full Text Available This review covers all of the common methods for the syntheses of aromatic and heterocyclic perfluoroalkyl sulfides, a class of compounds which is finding increasing application as starting materials for the preparation of agrochemicals, pharmaceutical products and, more generally, fine chemicals. A systematic approach is taken depending on the mode of incorporation of the SRF groups and also on the type of reagents used.

  8. A preliminary clinical report of 2LC reagent for early gastric cancer diagnosis

    Institute of Scientific and Technical Information of China (English)

    Min Li; Xue Zhong Chen; Zhi Xue Lin; Ling Chen

    2000-01-01

    AIM To explore the feasibility of early gastric cancer diagnosis with 2LC reagent, and to establish a grossexploration method for early gastric cancer with the reagent based on the feasibility.METHODS Add 30 mg or 0.3 mL 2LC reagent into 5 mL urinary sample, observe the change of urinary,and analyze the sample on DAO-JIN-UV-260 Ultraviolet-analyzer at 190nm - 700nm, then, record theabsorbance at 490nm. To determine best stage of sample, take some samples on 8:00 pm and 8:00 am,respectively. To select best dosage of 2LC, take the test with different concentrations. To test the effect ofoperation, conduct the experiment in different stages before and after the operation for the patients withgastric cancer. Two parallel samples were taken each time in the whole experiment.RESULTS Red compound produced by some reactions when the 2LC reagent was added into the urinary ofpatients with gastric cancer, and the urine had obvious absorptivity at about 490nm (positive). There was almost no reaction in the urine of other samples (negative). A total of 172 samples were tested, the positiverate of gastric cancer was above 90% in 48 samples before the operation, in which 8 advanced gastric cancerand 9 early stage gastric cancer samples behaved stronger positive reaction. The positive rate of 118 othersamples was less than 10%. The urine taken in the morning was batter than that in the evening. The bestdosage of 2LC was 6 mg/mL for crystal and 0.05 mL/mL for liquid. The test results of gastric cancerpatients with postoperative tumor recrudescence or transfer were positive, and the others were negative.CONCLUSION There is a high feasibility in manipulation simplification, specificity and receptivity of 2LCreagent for early gastric cancer detection, and the characteristics mentioned above will be improved based onthe advanced raw material used and the style of the 2LC reagent. It is an effective gross exploration methodfor early gastric cancer with the 2LC reagent, and can determine

  9. On-chip sample preparation by controlled release of antibodies for simple CD4 counting

    NARCIS (Netherlands)

    Beck, M.; Brockhuis, S.; Velde, van der N.; Breukers, C.; Greve, J.; Terstappen, L.W.M.M.

    2012-01-01

    We present a simple system for CD4 and CD8 counting for point-of-care HIV staging in low-resource settings. Automatic sample preparation is achieved through a dried reagent coating inside a thin (26 μm) counting chamber, allowing the delayed release of fluorochrome conjugated monoclonal antibodies a

  10. In vitro assembly of plant tubulin in the absence of microtubule-stabilizing reagents

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The assembly of microtubules is essential for physiological functions of microtubules. Addition of microtubule-stabilizing reagents or microtubule "seeds" is usually necessary for plant tubulin assembly in vitro, which hinders the investigation of plant microtubule dynamics. In the present note, highly purified plant tubulins have been obtained from lily pollen, a non-microtubule-stabilizing reagent or microtubule "seed" system for plant tubulin assembly has been established and the analysis of plant tubulin assembly performed. Experiment results showed that purified tubulin polymerized in vitro, and a typical microtubule structure was observed with electron microscopy. The kinetics curve of tubulin assembly exhibited typical "parabola". The presence of taxol significantly altered the character of plant tubulin assembly, including that abnormal microtubules were assembled and the critical concentration for plant tubulin assembly was decreased exceedingly from 3 mg/mL in the absence of taxol to 0.043 mg/mL in the presence of taxol.

  11. A Homogeneous HLA-B*27 Genotyping Assay Using Dried Reagent Mixtures

    Directory of Open Access Journals (Sweden)

    Minna Kiviniemi

    2009-01-01

    Full Text Available The presence of HLA-B*27 allele with patients suspected with ankylosing spondylitis can be used in the diagnostic process. We have developed an assay for typing for the HLA-B*27 in whole blood dried on sample collection cards using pre-dried reagent wells and homogeneous time-resolved fluorescence based PCR approach. Essentially only the sample needs to be added to the dry ready-to-use reaction well in order to start the homogenous amplification assay. The method was validated with 229 samples also typed with an existing DELFIA-based method and results of both assays were 100% concordant. The dried reagents were shown to be stable at least up to eight weeks at room temperature without any decline in their performance.

  12. Microsampling homogeneous immunoassay with Cedia digoxin reagents on the Technicon CHEM 1 chemistry analyzer.

    Science.gov (United States)

    Lua, A C; Chu, D K; Vlastelica, D

    1994-10-01

    We report the determination of digoxin concentration in serum with Microgenics Cedia digoxin reagents on the Technicon CHEM 1. The Technicon CHEM 1 clinical chemistry analyzer has a throughput of 720 tests per hour and uses only 7 microliters each of two reagents. A 100 test kit can perform 2,640 tests. The within-run coefficient of variation (CV) range is 2.3-0.9% and the total CV is 6.3-2.9% at concentrations tested ranging from 1.10 to 2.94 ng/ml. The results of the Technicon CHEM 1 (y) assay correlated well with those by the Technicon RA 1000 system (x) with 31 clinical serum samples (y = -0.03 + 1.11x, r = 0.96). We concluded that the Cedia digoxin assay on the Technicon CHEM 1 provides a very cost-effective, precise, rapid, and accurate means to determine digoxin concentration in serum.

  13. Hemozoin-generated vapor nanobubbles for transdermal reagent- and needle-free detection of malaria.

    Science.gov (United States)

    Lukianova-Hleb, Ekaterina Y; Campbell, Kelly M; Constantinou, Pamela E; Braam, Janet; Olson, John S; Ware, Russell E; Sullivan, David J; Lapotko, Dmitri O

    2014-01-21

    Successful diagnosis, screening, and elimination of malaria critically depend on rapid and sensitive detection of this dangerous infection, preferably transdermally and without sophisticated reagents or blood drawing. Such diagnostic methods are not currently available. Here we show that the high optical absorbance and nanosize of endogenous heme nanoparticles called "hemozoin," a unique component of all blood-stage malaria parasites, generates a transient vapor nanobubble around hemozoin in response to a short and safe near-infrared picosecond laser pulse. The acoustic signals of these malaria-specific nanobubbles provided transdermal noninvasive and rapid detection of a malaria infection as low as 0.00034% in animals without using any reagents or drawing blood. These on-demand transient events have no analogs among current malaria markers and probes, can detect and screen malaria in seconds, and can be realized as a compact, easy-to-use, inexpensive, and safe field technology.

  14. Advanced Treatment of Pesticide-Containing Wastewater Using Fenton Reagent Enhanced by Microwave Electrodeless Ultraviolet

    OpenAIRE

    Gong Cheng; Jing Lin; Jian Lu; Xi Zhao; Zhengqing Cai; Jie Fu

    2015-01-01

    The photo-Fenton reaction is a promising method to treat organic contaminants in water. In this paper, a Fenton reagent enhanced by microwave electrodeless ultraviolet (MWEUV/Fenton) method was proposed for advanced treatment of nonbiodegradable organic substance in pesticide-containing biotreated wastewater. MWEUV lamp was found to be more effective for chemical oxygen demand (COD) removal than commercial mercury lamps in the Fenton process. The pseudo-first order kinetic model can well desc...

  15. Kinetic investigations into the synthesis of disulphides via tetrathiomolybdate as a sulphur-transfer reagent

    OpenAIRE

    Sidiq, N.; Bhat, M.A.; Khan, K. Z.; Khuroo, M.A.

    2014-01-01

    Kinetic and mechanistic aspects of the conversion of halides to disulphides using benzyl triethyl ammonium tetrathiomolybdate as sulphur-transfer reagent were investigated. The reaction follows a 1:1 stoichiometry with overall second-order kinetics and involves the formation of monosulphides in addition to disulphides. In the light of our observations, we propose a nucleophilic substitution: carbon-metal-carbon (SN-CMC) reaction mechanism. The proposed mechanism, besides accounting for all of...

  16. Facile scission of isonitrile carbon–nitrogen triple bond using a diborane(4) reagent

    OpenAIRE

    Asakawa, Hiroki; Lee, Ka-Ho; Lin, Zhenyang; Yamashita, Makoto

    2014-01-01

    Transition metal reagents and catalysts are generally effective to cleave all three bonds (one σ and two π) in a triple bond despite its high bonding energy. Recently, chemistry of single-bond cleavage by using main-group element compounds is rapidly being developed in the absence of transition metals. However, the cleavage of a triple bond using non-transition-metal compounds is less explored. Here we report that an unsymmetrical diborane(4) compound could react with carbon monoxide and tert...

  17. Developmental Validation of Short Tandem Repeat Reagent Kit for Forensic DNA Profiling of Canine Biological Material

    OpenAIRE

    Dayton, Melody; Koskinen, Mikko T; Tom, Bradley K.; Mattila, Anna-Maria; Johnston, Eric; Halverson, Joy; Fantin, Dennis; DeNise, Sue; Budowle, Bruce; Smith, David Glenn; Kanthaswamy, Sree

    2009-01-01

    Aim To develop a reagent kit that enables multiplex polymerase chain reaction (PCR) amplification of 18 short tandem repeats (STR) and the canine sex-determining Zinc Finger marker. Methods Validation studies to determine the robustness and reliability in forensic DNA typing of this multiplex assay included sensitivity testing, reproducibility studies, intra- and inter-locus color balance studies, annealing temperature and cycle number studies, peak height ratio det...

  18. An air-stable copper reagent for nucleophilic trifluoromethylthiolation of aryl halides

    KAUST Repository

    Weng, Zhiqiang

    2012-12-12

    A series of copper(I) trifluoromethyl thiolate complexes have been synthesized from the reaction of CuF2 with Me3SiCF 3 and S8 (see scheme; Cu red, F green, N blue, S yellow). These air-stable complexes serve as reagents for the efficient conversion of a wide range of aryl halides into the corresponding aryl trifluoromethyl thioethers in excellent yields. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. The Design and Test of New Salt-Free Reagent Destruction Device

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Qian; OUYANG; Ying-gen; LI; Hui-bo

    2012-01-01

    <正>A new device which can destroy remnant salt-free reducing agent in 1BP or 2BP was designed. In current process the salt-free reagent destruction is: generally 1BP solution is slowly added into a sealed container containing a certain amount of concentrated nitric acid, connected to a vacuum pump, then placed in a protective flask. Because of corrosion of the nitrogen oxides in reaction, the rubber plug used

  20. The use of permanganate as a sequencing reagent for identification of 5-methylcytosine residues in DNA.

    OpenAIRE

    Fritzsche, E; Hayatsu, H; Igloi, G L; Iida, S.; Kössel, H

    1987-01-01

    The use of permanganate as a reagent for DNA sequencing by chemical degradation has been studied with respect to its specificity for 5-methylcytosine residues. At weakly acidic pH and room temperature, 0.2 mM potassium permanganate reacts preferentially with thymine, 5-methylcytosine, and to a lesser extent with purine residues, while cytosine remains essentially intact. Permanganate oxidation is, therefore, a suitable DNA sequencing reaction for positive discrimination between 5-methylcytosi...

  1. Towards instantaneous quantitative fluoroimaging drugs determination in body fluids with no added reagents

    OpenAIRE

    Strashnikova, Natalia V.; Gershanik, Arcady P.; Papiashvili, Nona; Khankin, Daniel; Cohen-Luria, Rivka; Mark, Shlomo; Kalisky, Yehoshua; Parola, Abraham H

    2010-01-01

    Our objective is to develop a simple monitoring technique for rapid, sensitive and quantitative drugs detection in body fluids, with no reagent added and no need for qualified professionals. The user-friendly automatic Fluo-imager will (a) measure the full-range 3D fluorescence map of the inserted fluid sample, (b) determine the chemical nature and concentration of the drugs and (c) transfer the results through internet to the diagnosis center. For these goals the fluorescence measurement dat...

  2. Optimization of Gene Transfection in Murine Myeloma Cell Lines using Different Transfection Reagents

    OpenAIRE

    Shabani, Mahdi; Hemmati, Sheyda; Hadavi, Reza; Amirghofran, Zahra; Jeddi-Tehrani, Mahmood; Rabbani, Hodjatallah; Shokri, Fazel

    2010-01-01

    Purification and isolation of cellular target proteins for monoclonal antibody (MAb) production is a difficult and time-consuming process. Immunization of mice with murine cell lines stably transfected with genes coding for xenogenic target molecules is an alternative method for mouse immunization and MAb production. Here we present data on transfection efficiency of some commercial reagents used for transfection of murine myeloma cell lines. Little is known about transfectability of murine m...

  3. Determination оf Optimum Constructive Parameters for Circulating-Reagent Regeneration Sector Apparatus

    OpenAIRE

    A. M. Sheiko; V. V. Ivashechkin; V. V. Veremenuk

    2008-01-01

    On the basis of equation analysis for velocity distribution in near filter mudded zone optimal constructional parameters of sector apparatus for circulating-reagent well filter regeneration have been evaluated via angle ratio of forcing and section sectors and number of sectors. The method for determination of sector apparatus length of а selected pump that provides dissolution of mud formation in filter and near filter zone is proposed in the paper. The obtained data would promote upgrading ...

  4. Micellar modified spectrophotometric determination of nitrobenzenes based upon reduction with tin(II), diazotisation and coupling with the Bratton-Marshall reagent.

    Science.gov (United States)

    Escrig-Tena, I; Alvarez Rodríguez, L; Esteve-Romero, J; García-Alvarez-Coque, M C

    1998-09-01

    Nitrobenzenes, such as the antibiotic chloramphenicol, the vasodilator nicardipine, and the herbicides dinitramin, dinobuton, fenitrothion, methylparathion, oxyfluorfen, parathion, pendimethalin, quintozene, and trifluralin, were determined by using a spectrophotometric method in the visible region (540 nm). The method was based on the reduction of the nitrobenzenes to arylamines with tin(II) chloride, diazotisation of the arylamines and coupling of the diazonium ions with the Bratton-Marshall reagent. The two latter reactions were performed in a micellar medium of sodium dodecyl sulphate. The linear calibration range was 2x10(-6) to 7x10(-5) M (r>0.999), with limits of detection in the 10(-7) M level, which is 2-6 fold lower with respect to the corresponding spectrophotometric procedure in non-micellar medium. The procedure was applied to the analysis of the compounds in commercial preparations (pharmaceuticals and herbicide formulations) and in water samples, with good recoveries. PMID:18967301

  5. Efficient cross-coupling of aryl Grignard reagents with alkyl halides by recyclable ionic iron(III) complexes bearing a bis(phenol)-functionalized benzimidazolium cation.

    Science.gov (United States)

    Xia, Chong-Liang; Xie, Cun-Fei; Wu, Yu-Feng; Sun, Hong-Mei; Shen, Qi; Zhang, Yong

    2013-12-14

    A novel bis(phenol)-functionalized benzimidazolium salt, 1,3-bis(3,5-di-tert-butyl-2-hydroxybenzyl)benzimidazolium chloride (H3LCl, 1), was designed and used to prepare ionic iron(III) complexes of the type [H3L][FeX4] (X = Cl, 2; X = Br, 3). Both 2 and 3 were characterized by elemental analysis, Raman spectroscopy, electrospray ionization mass spectrometry and X-ray crystallography. The catalytic performances of 2 and 3 in cross-coupling reactions using aryl Grignard reagents with primary and secondary alkyl halides bearing β-hydrogens were studied. This analysis shows that complex 2 has good potential for alkyl chloride-mediated coupling. In comparison, complex 3 showed slightly lower catalytic activity. After decanting the product contained in the ethereal layer, complex 2 could be recycled at least eight times without significant loss of catalytic activity. PMID:24145602

  6. Difluoromethane preparation

    NARCIS (Netherlands)

    Wiersma, A.; Sandt, E.J.A.; Van Bekkum, H.; Makkee, M.; Moulijn, J.A.

    1996-01-01

    Abstract of NL 9401574 (A) The invention relates to a method for preparing difluoromethane, wherein dichlorodifluoromethane or monochlorodifluoromethane is brought into contact with hydrogen in the presence of palladium on activated carbon, wherein the loading of the palladium on the activated c

  7. Sulphur extraction method using Kiba reagent for determination of sulphur-34 isotope

    International Nuclear Information System (INIS)

    Sn2+ in strong H3PO4 (to be called KIBA reagent) is a powerful reducing reagent of sulphate to hydrogen sulphide. This method can be applied for quantitative analysis and determine sulphur-34 isotope from sulphur-bearing materials, either organic or anorganic. In this experiment, sulphide rocks as pyrit and pyrrhotite from were taken from West Kalimantan, sulphate rock as allunite was taken Cugung Rajabasa-Lampung, Papandayan-West Java. From sulfur concentration data as a reference analyzed X ray fluorescence spectrometer and data of first temperature which H2S gas evoluted show that Kiba reagent is most effective and faster for sulphur extraction from sulfide rocks pyrit and pyrrhotite if compared with sulfate rocks and elemental sulfur rocks. The δ 34S value for pyrit and pyrrhotite were found to be -4.619 0/00 CDT and 8.165 0/00 CDT, respectively. Allunite had δ 34S value of 3.7 0/00 CDT, and gypsum had δ 34S value 8.898 0/00 CDT. Element sulphur from Papandayan had δ 34S value of -0.745 0/00 CDT, and elemental sulphur from Cugung Rajabasa had δ 34S value of -2.945 0/00 CDT. (authors)

  8. Self-catalytic degradation of ortho-chlorophenol with Fenton's reagent studied by chemiluminescence

    Institute of Scientific and Technical Information of China (English)

    Zhen Lin; HuiChen; Yun Zhou; Nobuaki Ogawa; Jin-Ming Lin

    2012-01-01

    The degradation of ortho-chlorophenol using Fenton's reagent was studied by chemiluminescence(CL).Without a special CL reagent,a weak CL emission from the mixture of ferrous ion and hydrogen peroxide was observed at room temperature.The CL intensity was increased by the addition of ortho-chlorophenol into the mixed solution.When the temperature was raised to 65℃,the CL intensity was enhanced strongly.The CL mechanisms for the system H2O2-Fe2+ with and without ortho-chlorophenol were studied by examining the CL spectrum,gas chromatography-mass spectrometry and electron spin resonance spectrum.The effects of various free radical scavengers,surfactants and fluorescence compounds on the CL intensity were also investigated.A self-catalytic oxidation mechanism was proposed.The results showed that singlet oxygen was the main emitter for the system H2O2-Fe2+.The strong CL from the system H2O2-Fe2+-ortho-chlorophenol was due to singlet oxygen and electronically excited quinone.The benzenediol-like intermediate product formed during the phenol oxidation process greatly promoted the Fenton's reaction and led to higher CL intensity.Chemiluninescence is a novel approach for the investigation of the oxidation of some organic pollutants by Fenton's reagent.

  9. Assessment and identification of some novel NOx reducing reagents for SNCR process

    International Nuclear Information System (INIS)

    Nitrogen oxides (NOx) are one of the most hazardous air pollutants arising from the combustion processes. Because of the implementation of strict emission limits many NOx removal technologies have been developed. In the present work post combustion NOx removal technique that is Selective Non-Catalytic Reduction (SNCR) has been investigated in a pilot scale 150 kW combustion rig facility. Investigation has been performed using some novel NOx reducing reagents like urea, ammonium carbonate and mixture of their 50%-50% aqueous solution within the temperature range of 700 to 1200 deg. C., at 1.1% excess oxygen and background NOx level of 500 ppm. The effects of these reagents were determined in term of their temperature characteristics and molar ratio. Among the reducing reagents used urea solution gave the highest NOx removal efficiency (81%) and was attractive due to its superior high temperature (1000 to 1150 deg. C) performance, ammonium carbonate was more effective at lower temperature range (850 to 950 deg. C) though its efficiency (32%) was lower than urea, while 50-50% solution of urea and ammonium carbonate gave higher efficiency than ammonium carbonate but slightly lesser than urea within a wide temperature range (875 to 1125 deg. C). It was also observed that the NOx removal efficiency was increased with increasing the molar ratio. (author)

  10. Photochemical reactions of aromatic compounds and the concept of the photon as a traceless reagent.

    Science.gov (United States)

    Hoffmann, Norbert

    2012-11-01

    Electronic excitation significantly changes the reactivity of chemical compounds. Compared to ground state reactions, photochemical reactions considerably enlarge the application spectrum of a particular functional group in organic synthesis. Multistep syntheses may be simplified and perspectives for target oriented synthesis (TOS) and diversity oriented synthesis (DOS) are developed. New compound families become available or may be obtained more easily. In contrast to common chemical reagents, photons don't generate side products resulting from the transformation of a chemical reagent. Therefore, they are considered as a traceless reagent. Consequently, photochemical reactions play a central role in the methodology of sustainable chemistry. This aspect has been recognized since the beginning of the 20th century. As with many other photochemical transformations, photochemical reactions of aromatic, benzene-like compounds illustrate well the advantages in this context. Photochemical cycloadditions of aromatic compounds have been investigated for a long time. Currently, they are applied in various fields of organic synthesis. They are also studied in supramolecular structures. The phenomena of reactivity and stereoselectivity are investigated. During recent years, photochemical electron transfer mediated reactions are particularly focused. Such transformations have likewise been performed with aromatic compounds. Reactivity and selectivity as well as application to organic synthesis are studied.

  11. Flow injection spectrophotometry using natural reagent from Morinda citrifolia root for determination of aluminium in tea.

    Science.gov (United States)

    Tontrong, Sopa; Khonyoung, Supada; Jakmunee, Jaroon

    2012-05-01

    A flow injection (FI) spectrophotometric method with using natural reagent extracted from Morinda citrifolia root has been developed for determination of aluminium. The extract contained anthraquinone compounds which could react with Al(3+) to form reddish complexes which had maximum absorption wavelength at 499.0nm. The extract could be used as a reagent in FI system without further purification to obtain pure compound. A sensitive method for determination of aluminium in concentration range of 0.1-1.0mgL(-1), with detection limit of 0.05mgL(-1) was achieved. Relative standard deviations of 1.2% and 1.7% were obtained for the determination of 0.1 and 0.6mgL(-1) Al(3+) (n=11). Sample throughput of 35h(-1) was achieved with the consumption of 3mL each of carrier and reagent solutions per injection. The developed method was successfully applied to tea samples, validated by the FAAS standard method. The method is simple, fast, economical and could be classified as a greener analytical method.

  12. Hydrazide and hydrazine reagents as reactive matrices for MALDI-MS to detect gaseous aldehydes.

    Science.gov (United States)

    Shigeri, Yasushi; Ikeda, Shinya; Yasuda, Akikazu; Ando, Masanori; Sato, Hiroaki; Kinumi, Tomoya

    2014-08-01

    The reagents 19 hydrazide and 14 hydrazine were examined to function as reactive matrices for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to detect gaseous aldehydes. Among them, two hydrazide (2-hydroxybenzohydrazide and 3-hydroxy-2-naphthoic acid hydrazide) and two hydrazine reagents [2-hydrazinoquinoline and 2,4-dinitrophenylhydrazine (DNPH)] were found to react efficiently with carbonyl groups of gaseous aldehydes (formaldehyde, acetaldehyde and propionaldehyde); these are the main factors for sick building syndrome and operate as reactive matrices for MALDI-MS. Results from accurate mass measurements by JMS-S3000 Spiral-TOF suggested that protonated ion peaks corresponding to [M + H](+) from the resulting derivatives were observed in all cases with the gaseous aldehydes in an incubation, time-dependent manner. The two hydrazide and two hydrazine reagents all possessed absorbances at 337 nm (wavelength of MALDI nitrogen laser), with, significant electrical conductivity of the matrix crystal and functional groups, such as hydroxy group and amino group, being important for desorption/ionization efficiency in MALDI-MS. To our knowledge, this is the first report that gaseous molecules could be derivatized and detected directly in a single step by MALDI-MS using novel reactive matrices that were derivatizing agents with the ability to enhance desorption/ionization efficiency. PMID:25044902

  13. Kinetic and economic analysis of reactive capture of dilute carbon dioxide with Grignard reagents.

    Science.gov (United States)

    Dowson, G R M; Dimitriou, I; Owen, R E; Reed, D G; Allen, R W K; Styring, P

    2015-01-01

    Carbon Dioxide Utilisation (CDU) processes face significant challenges, especially in the energetic cost of carbon capture from flue gas and the uphill energy gradient for CO2 reduction. Both of these stumbling blocks can be addressed by using alkaline earth metal compounds, such as Grignard reagents, as sacrificial capture agents. We have investigated the performance of these reagents in their ability to both capture and activate CO2 directly from dried flue gas (essentially avoiding the costly capture process entirely) at room temperature and ambient pressures with high yield and selectivity. Naturally, to make the process sustainable, these reagents must then be recycled and regenerated. This would potentially be carried out using existing industrial processes and renewable electricity. This offers the possibility of creating a closed loop system whereby alcohols and certain hydrocarbons may be carboxylated with CO2 and renewable electricity to create higher-value products containing captured carbon. A preliminary Techno-Economic Analysis (TEA) of an example looped process has been carried out to identify the electrical and raw material supply demands and hence determine production costs. These have compared broadly favourably with existing market values.

  14. Candidate reagents and procedures for the dissolution of Hanford Site single-shell tank sludges

    International Nuclear Information System (INIS)

    At least some of the waste in the 149 single-shell tanks (SST) at the US Department of Energy (DOE) Hanford Site will be retrieved, treated, and disposed of. Although the importance of devising efficient and cost-effective sludge dissolution procedures has long been recognized, a concerted bench-scale effort to devise and test such procedures with actual solids representative of those in Hanford Site SSTs has not been performed. Reagents that might be used, either individually or serially, to dissolve sludges include HNO3, HNO3-oxalic acid, and HNO3-HF. This report consolidates and updates perspectives and recommendations concerning reagents and procedures for dissolving Hanford Site SST and selected double-shell tank (DST) sludges. The principal objectives of this report are as follows: (1) Compile and review existing experimental data on dissolution of actual Hanford Site SST and DST sludges. (2) Further inform Hanford Site engineers and scientists concerning the utility of combinations of thermally unstable complexants (TUCS) reagents and various reducing agents for dissolving SST and DST sludges. (This latter technology has recently been explored at the Argonne National Laboratory.) (3) Provide guidance in laying out a comprehensive experimental program to develop technology for dissolving all types of Hanford Site SST and DST sludges. 6 refs., 1 fig., 4 tabs

  15. High-Speed Reduction of Triarylpyrylium Salts Using Zn(BH42/SiO2 as an Efficient and Regiospecific Reducing Reagent

    Directory of Open Access Journals (Sweden)

    Arash Mouradzadegun

    2013-01-01

    Full Text Available The regiospecific reduction of some triarylpyrylium salts in the presence of modified hydride donors was investigated. Among these reagents, Zn(BH42/SiO2 performed the best results. The major advantages of this reagent are the cheapness, availability, simplicity in operation, very short reaction time and much improved regioselectivity in comparison with the other reducing reagents.

  16. Modulation of optical density by sulfhydryl reagents in microbiuret method: a modified method for protein determination in the presence of sulfhydryl reagents.

    Directory of Open Access Journals (Sweden)

    Matsui,Hideki

    1983-04-01

    Full Text Available 2-Mercaptoethanol increases the optical density of assay solutions at wavelengths between 280 to 400 nm, and therefore interferes with the measurement of protein concentration by the microbiuret method. Protein concentration can be determined in the presence of 2-mercaptoethanol up to 6 mM by modification of the method as follows: after the precipitation of protein by trichloroacetic acid in the presence of deoxycholate, the precipitate is resolubilized with NaOH solution. Dithiothreitol interfered with the protein determinations could by made in the presence of 4 mM of dithiothreitol with the modified microbiuret method. This modified method is time-saving and more reliable than other methods for protein determination, such as Lowry's method, in the presence of sulfhydryl reagents.

  17. Organophosphorus Compound DEPBT as a Coupling Reagent for Oligopeptides and Peptoids Synthesis:Studies on Its Mechanism

    Institute of Scientific and Technical Information of China (English)

    HuiLIU; YunHuaYE; 等

    2002-01-01

    Some oligopeptides and peptoids were synthesized by applying the organophosphorus compound DEPBT as a coupling reagent. D-Biotin-OOBt was obtained unexpectedly. A proposed reaction mechanism for DEPBT-mediated coupling was proved.

  18. Eco-friendly synthesis for MCM-41 nanoporous materials using the non-reacted reagents in mother liquor

    OpenAIRE

    Ng, Eng-Poh; Goh, Jia-Yi; Ling, Tau Chuan; Mukti, Rino R

    2013-01-01

    Nanoporous materials such as Mobil composite material number 41 (MCM-41) are attractive for applications such as catalysis, adsorption, supports, and carriers. Green synthesis of MCM-41 is particularly appealing because the chemical reagents are useful and valuable. We report on the eco-friendly synthesis of MCM-41 nanoporous materials via multi-cycle approach by re-using the non-reacted reagents in supernatant as mother liquor after separating the solid product. This approach was achieved vi...

  19. Study on Treatability of Real Textile Wastewater by Electrochemically Generated  Fenton Reagent using Graphite Felt Cathode

    OpenAIRE

    Akbar Eslami; Mohammad Reza Massoudinejad; Farshid Ghanbari; Mahsa Moradi

    2012-01-01

    Background and Objectives: Electro-Fenton process has been widely applied for dye removal from aqueous solution lately. Fenton's reagent is formed in the electrolysis medium through the simultaneous electrochemical reduction of O2 and Fe3+ to H2O2 and Fe2+ respectively on the cathode surface. In this paper, COD reduction potential and decolorization of real textile wastewater were evaluated by electrochemically generated Fenton reagent process. This wastewater mainly contains non-biodegradabl...

  20. Enzymatic electrochemical detection of epidemic-causing Vibrio cholerae with a disposable oligonucleotide-modified screen-printed bisensor coupled to a dry-reagent-based nucleic acid amplification assay.

    Science.gov (United States)

    Yu, Choo Yee; Ang, Geik Yong; Chan, Kok Gan; Banga Singh, Kirnpal Kaur; Chan, Yean Yean

    2015-08-15

    In this study, we developed a nucleic acid-sensing platform in which a simple, dry-reagent-based nucleic acid amplification assay is combined with a portable multiplex electrochemical genosensor. Preparation of an amplification reaction mix targeting multiple DNA regions of interest is greatly simplified because the lyophilized reagents need only be reconstituted with ultrapure water before the DNA sample is added. The presence of single or multiple target DNAs causes the corresponding single-stranded DNA (ssDNA) amplicons to be generated and tagged with a fluorescein label. The fluorescein-labeled ssDNA amplicons are then analyzed using capture probe-modified screen-printed gold electrode bisensors. Enzymatic amplification of the hybridization event is achieved through the catalytic production of electroactive α-naphthol by anti-fluorescein-conjugated alkaline phosphatase. The applicability of this platform as a diagnostic tool is demonstrated with the detection of toxigenic Vibrio cholerae serogroups O1 and O139, which are associated with cholera epidemics and pandemics. The platform showed excellent diagnostic sensitivity and specificity (100%) when challenged with 168 spiked stool samples. The limit of detection was low (10 colony-forming units/ml) for both toxigenic V. cholerae serogroups. A heat stability assay revealed that the dry-reagent amplification reaction mix was stable at temperatures of 4-56 °C, with an estimated shelf life of seven months. The findings of this study highlight the potential of combining a dry-reagent-based nucleic acid amplification assay with an electrochemical genosensor in a more convenient, sensitive, and sequence-specific detection strategy for multiple target nucleic acids.

  1. Synthesis of dinitrophenyl-L-Pro-N-hydroxysuccinimide ester and four new variants of Sanger's reagent having chiral amines and their application for enantioresolution of mexiletine using reversed-phase high-performance liquid chromatography.

    Science.gov (United States)

    Bhushan, Ravi; Tanwar, Shivani

    2009-07-24

    Four chiral derivatizing reagents (CDRs) having enantiomerically pure amines and two CDRs namely, [N-succinimidyl-(S)-2-(6-methoxynaphth-2-yl)propionate], and [dinitrophenyl-L-Pro-N-hydroxysuccinimide ester, DNP-L-Pro-SU] were synthesized and were used to prepare diastereomers of (R,S)-mexiletine (MEX); these were separated by reversed-phase high-performance liquid chromatography (RP-HPLC). The method was validated for linearity, accuracy, limit of detection (LOD) and limit of quantification (LOQ). PMID:19552908

  2. Organization of a system of guarantee of quality for the control of specifications of chemical reagents

    International Nuclear Information System (INIS)

    Analytic methods were implemented based on valuations acid-base and redox for the quantitative determination of sodium hidroxid, iodine and iron chloride III, like part of a system of quality for the technical specifications of these reagents. The planning of its system of quality includes two fundamental parts: insurance and control of quality. In the insurance part the state of operation of the team that you uses settled down, gauges the one that achieve to maintain under the supervision of a single operator (electronic equip and glassware) and the design of the appropriate documents settled down to carry out the periodic supervision of the acting of the same ones and other aspects characteristic of the system (experimental results). Also protocolized and validated the analytic methods to use following the approaches of precision given by ASTM, organism whose methodologies are recognized in the country like official; other procedures, as that of calibration of the volumetric equipments, they were also protocolized. In the part of control of quality, the limits settled down and procedures were applied the scales and used other, to the necessary distilled water to carry out the determinations and to the used chemical reagents. With base in the obtained results you determines that the analyzed reagents fulfill the specifications of ACS (and with those reported by the maker) at the same time settled down that the laboratory 09 of the Chemistry School, used in a large part of development of this project, it didn't fulfill the necessary requirements so that it works as laboratory of control of quality. As an alternative, the administration of the School outlines as solution the use of the Laboratory of Insurance of the Quality from the Unit of Service to the Industry for such end

  3. Effects of coal composition and flotation reagents on the water resistance of binderless briquettes

    Energy Technology Data Exchange (ETDEWEB)

    Motaung, S.R.; Mangena, S.J.; de Korte, G.J. [Syngas & Coal Technology, Sasolburg (South Africa)

    2007-10-15

    The difference in the physical properties, particularly the water resistance or wet strength, of the binderless coal briquettes produced from flotation feed and concentrate was investigated using six bituminous coals from two collieries in the Witbank Coalfield. The coal samples were analyzed for their proximate, petrographic, and mineralogical properties. The presence, in the flotation concentrates, of the reagents used during the froth flotation process was also investigated using gas chromatography. Pillow-shaped binderless briquettes were produced from coal samples at various moisture contents and a pressure of approximately 17 MPA using a Komarek B-100A double-roll press. The briquettes were tested for some physical properties (i.e., dry- and wet-compressive strengths), which were thereafter compared with the properties determined for the coal samples. The binderless briquettes produced from the flotation concentrates were more water-resistant than those produced from the flotation feed. The flotation feed and concentrates of the coals tested were found to have similar petrographic properties. As expected, the ash and kaolinite contents were found to be lower in the flotation concentrates than in the flotation feed. Flotation reagents were detected in the flotation concentrates from both collieries. From the results obtained it is concluded that the increased water resistance of the binderless briquettes produced from flotation concentrates of the coals tested is due to a combination of the fineness of the coal particles, assisted by the amount of reactive macerals (most particularly vitrinite) with the lower ash and kaolinite contents, together with the presence of the flotation reagents, particularly the collector, in the flotation concentrate.

  4. Toward low-cost affinity reagents: lyophilized yeast-scFv probes specific for pathogen antigens.

    Directory of Open Access Journals (Sweden)

    Sean A Gray

    Full Text Available The generation of affinity reagents, usually monoclonal antibodies, remains a critical bottleneck in biomedical research and diagnostic test development. Recombinant antibody-like proteins such as scFv have yet to replace traditional monoclonal antibodies in antigen detection applications, in large part because of poor performance of scFv in solution. To address this limitation, we have developed assays that use whole yeast cells expressing scFv on their surfaces (yeast-scFv in place of soluble purified scFv or traditional monoclonal antibodies. In this study, a nonimmune library of human scFv displayed on the surfaces of yeast cells was screened for clones that bind to recombinant cyst proteins of Entamoeba histolytica, an enteric pathogen of humans. Selected yeast-scFv clones were stabilized by lyophilization and used in detection assay formats in which the yeast-scFv served as solid support-bound monoclonal antibodies. Specific binding of antigen to the yeast-scFv was detected by staining with rabbit polyclonal antibodies. In flow cytometry-based assays, lyophilized yeast-scFv reagents retained full binding activity and specificity for their cognate antigens after 4 weeks of storage at room temperature in the absence of desiccants or stabilizers. Because flow cytometry is not available to all potential assay users, an immunofluorescence assay was also developed that detects antigen with similar sensitivity and specificity. Antigen-specific whole-cell yeast-scFv reagents can be selected from nonimmune libraries in 2-3 weeks, produced in vast quantities, and packaged in lyophilized form for extended shelf life. Lyophilized yeast-scFv show promise as low cost, renewable alternatives to monoclonal antibodies for diagnosis and research.

  5. A chemical-modification approach to the olfactory code. Studies with a thiol-specific reagent.

    Science.gov (United States)

    Menevse, A; Dodd, G; Poynder, T M

    1978-12-15

    The effects of thiol-specific reagents on the amplitude of the electro-olfactogram (E.O.G.) responses elicited from frog olfactory mucosa by pulses of odorant vapours was studied. The impermeant thiol-specific reagent mersalyl [(3-{[2-(carboxymethoxy)-benzoyl]amino}-2-methoxypropyl)hydroxymercury monosodium salt] brings about a rapid decrease in the E.O.G. signal obtained with the odorant pentyl acetate. The extent of the decrease is proportional to the concentration of the mersalyl applied and the effect of the reagent is partially but incompletely reversed by treatment of the labelled mucosa with dithiothreitol. The sites labelled by mersalyl can be protected by pretreating the mucosa with a dilute solution of the odorant pentyl acetate and leaving the solution in contact with the tissue after the addition of mersalyl. When the protecting odorant is washed out of the tissue, the original E.O.G. amplitude is regained. Pentyl acetate applied to the mucosa protected the E.O.G. response to vapour pulses of the following odorants from the effects of mersalyl: n-butyric acid, n-butyl acetate, phenylacetaldehyde and cineole (1,3,3-trimethyl-2-oxabicyclo[2.2.2]octane). The pentyl acetate applied to the mucosa failed to protect the E.O.G. response to vapour pulses of the following odorants from the effects of mersalyl: butan-1-ol, benzyl acetate, nitrobenzene, beta-ionone and linalyl acetate. The significance of the differential protection effects for the odour-quality-coding mechanism in the olfactory primary neurons is discussed. It is suggested that the olfactory code at this level of the olfactory system may be elucidated by chemical-modification methods. PMID:311638

  6. Enhanced electrocatalytic CO2 reduction via field-induced reagent concentration

    Science.gov (United States)

    Liu, Min; Pang, Yuanjie; Zhang, Bo; de Luna, Phil; Voznyy, Oleksandr; Xu, Jixian; Zheng, Xueli; Dinh, Cao Thang; Fan, Fengjia; Cao, Changhong; de Arquer, F. Pelayo García; Safaei, Tina Saberi; Mepham, Adam; Klinkova, Anna; Kumacheva, Eugenia; Filleter, Tobin; Sinton, David; Kelley, Shana O.; Sargent, Edward H.

    2016-09-01

    Electrochemical reduction of carbon dioxide (CO2) to carbon monoxide (CO) is the first step in the synthesis of more complex carbon-based fuels and feedstocks using renewable electricity. Unfortunately, the reaction suffers from slow kinetics owing to the low local concentration of CO2 surrounding typical CO2 reduction reaction catalysts. Alkali metal cations are known to overcome this limitation through non-covalent interactions with adsorbed reagent species, but the effect is restricted by the solubility of relevant salts. Large applied electrode potentials can also enhance CO2 adsorption, but this comes at the cost of increased hydrogen (H2) evolution. Here we report that nanostructured electrodes produce, at low applied overpotentials, local high electric fields that concentrate electrolyte cations, which in turn leads to a high local concentration of CO2 close to the active CO2 reduction reaction surface. Simulations reveal tenfold higher electric fields associated with metallic nanometre-sized tips compared to quasi-planar electrode regions, and measurements using gold nanoneedles confirm a field-induced reagent concentration that enables the CO2 reduction reaction to proceed with a geometric current density for CO of 22 milliamperes per square centimetre at -0.35 volts (overpotential of 0.24 volts). This performance surpasses by an order of magnitude the performance of the best gold nanorods, nanoparticles and oxide-derived noble metal catalysts. Similarly designed palladium nanoneedle electrocatalysts produce formate with a Faradaic efficiency of more than 90 per cent and an unprecedented geometric current density for formate of 10 milliamperes per square centimetre at -0.2 volts, demonstrating the wider applicability of the field-induced reagent concentration concept.

  7. 2-Hydroxy-4-n-butoxy-5-bromoacetophenone thiosemicarbazone as an extractive spectrophotometric reagent for nickel

    OpenAIRE

    K N Patel; K. S. Parikh; Rashmin Manubhai Patel

    2011-01-01

    2-hydroxy-4-n-butoxy-5-bromoacetophenone thiosemicarbazone (HBBrAT) is spectrophotometric reagent for nickel (II) in chloroform. The metal ion reacts with 2-hydroxy-4-n-butoxy-5-bromoacetophenone thiosemicarbazone (HBBrAT) forming a dark brown coloured complex in the pH range 7.0-11.0. The complex shows maximum absorption at 440 nm. Beer’s law is obeyed in the range 2.74-6.86 µg/mL. The molar absorptivity and Sandell’s sensitivity are found to be 5229 Lmol-1cm-1 and 0.0105 &...

  8. A Class of Effective of Decarboxylative Perfluoroalkylating Reagents: [(phen)2Cu](O2CRF)

    KAUST Repository

    Huang, Yangjie

    2016-04-13

    This article describes the invention of a class of effective reagents [(phen)2Cu](O2CRF) (1) for the decarboxylative perfluoroalkylation of aryl and heteroaryl halides. Treatment of the copper tert-butyloxide with phenanthroline ligands, with subsequent addition of perfluorocarboxylic acids afforded the air-stable copper(I) perfluorocarboxylato complexes 1. These complexes reacted with a variety of aryl and heteroaryl halides to form perfluoroalkyl(hetero)arenes in moderate to high yields. Computational studies suggested that the coordination of the second phen ligand may reduce the energy barrier for the decarboxylation of perfluorocarboxylate to facilitate the perfluoroalkylation.

  9. Gene delivery to mice spermatogenic stem cells by EffecteneTM reagent

    Institute of Scientific and Technical Information of China (English)

    陈晓光; 王宁; 姚纪花; 陈浩明; 沈琦; 薛京伦

    2004-01-01

    @@ Spermatogenic (stem) cells, or spermatogonial stem cells, are the only cell type in postnatal mammals, which have the capability to self-renew and to contribute geneticinformation to the next generation. The manipulation of spermatogenic cells and the modification of their genomes have great significance for the treatment of male sterility,for gene therapy via germ cells, as well as for building transgenic animal models. 1 In this assay, we analyzed the efficiency of EffecteneTM reagent-mediated gene transfection into spermatogenic cells. The effect of transplants with different time schedules on transfection efficiency and on gene expression was also investigated.

  10. Highly nucleophilic dipropanolamine chelated boron reagents for aryl-transmetallation to iron complexes.

    Science.gov (United States)

    Dunsford, Jay J; Clark, Ewan R; Ingleson, Michael J

    2015-12-21

    New aryl- and heteroarylboronate esters chelated by dipropanolamine are synthesised directly from boronic acids. The corresponding anionic borates are readily accessible by deprotonation and demonstrate an increase in hydrocarbyl nucleophilicity in comparison to other common borates. The new borates proved competent for magnesium or zinc additive-free, direct boron-to-iron hydrocarbyl transmetallations with well-defined iron(II) (pre)catalysts. The application of the new borate reagents in representative Csp(2)-Csp(3) cross-coupling led to almost exclusive homocoupling unless coupling is performed in the presence of a zinc additive. PMID:26554484

  11. Researching the technology of tar removal from coke-chemical plants’ wastewater by reagent flotation method

    OpenAIRE

    Anna V. Ivanchenko; Dmytro O. Yelatontsev; Mykola D. Voloshin; Olga O. Dupenko

    2015-01-01

    The study aims to identify process patterns of tars and oils removal from phenolic wastewater by reagent flotation with bringing those components’ content to acceptable concentrations. For the first time established is the effect of Al2(SO4)3, AlCl3, FeSO4, Fe2(SO4)3, Al2(OH)5Cl and FeCl3 doses onto residual tar content in phenolic wastewater. Results obtained give the possibility to prevent air pollution resulting from the toxic substances emission at the wet quenching with water containing ...

  12. Molecular diagnosis of rinderpest and Peste des Petits Ruminants virus using trizol reagent

    Directory of Open Access Journals (Sweden)

    U. Farooq, Q. M. khan and T. Barrett

    2008-05-01

    Full Text Available Reverse transcription polymerase chain reaction was standardized to diagnose and differentiate between rinderpest (RP and peste des petits ruminants (PPR viruses. The RNA of these viruses was isolated using trizol reagent. The P and N-gene primers amplified DNA of RP and PPR viruses, giving 429bp and 238bp, respectively in regular PCR. The F-gene specific primers amplified RP and PPR viruses giving DNA product of 372bp in regular PCR, while F-gene nested primers differentially amplified RPV and PPRV giving product of 309bp and 235bp, respectively in nested PCR.

  13. Remediation of polluted soils contaminated with Linear Alkyl Benzenes using Fenton's reagent

    Directory of Open Access Journals (Sweden)

    Douglas do Nascimento Silva

    2005-06-01

    Full Text Available Linear Alkyl Benzenes (LABs are used as insulating oil for electric cables. When it happens a spill, LABs they are basically sorbed in the soil, because, these compounds have high hidrophobicity and low vapor pressure. The conventional methods of treatment of soils are not efficient. The Fenton's reaction (reaction between a solution of iron II and hydrogen peroxide it generates hydroxyl radicals, not selective, and capable of oxidize a great variety of organic compounds. A study was conducted to evaluate the viability of use of the Fenton's reagents to promote the remediation of polluted soils with Linear Alkyl Benzenes. A column was especially projected for these experiments, packed with a sandy and other soil loamy. The pH of the soil was not altered. The obtained results demonstrated the technical viability of the process of injection of the Fenton's reagents for the treatment of polluted areas with LABs.Os Linear Alquilbenzenos (LABs são usados como fluido refrigerante de cabos elétricos. Quando ocorre um vazamento, os LABs ficam basicamente adsorvidos no solo, pois, são compostos bastante hidrofóbicos e com baixa pressão de vapor. Os métodos convencionais de tratamento de solos não são eficientes. A reação de Fenton (solução de ferro II e peróxido de hidrogênio gera radicais hidroxila, não seletivos, e capazes de oxidar uma grande variedade de compostos orgânicos, chegando a mineralização dos mesmos. Neste trabalho foi estudada a viabilidade de utilização dos reagentes de Fenton para promover a remediação de solos contaminados com LABs. Utilizou-se uma coluna especialmente projetada para estes experimentos, empacotada com um solo arenoso e outro argiloso. O pH do solo não foi alterado. Os resultados obtidos demonstram a viabilidade técnica do processo de injeção dos reagentes de Fenton para o tratamento de áreas contaminadas com LABs.

  14. Dual Hypervalent Iodine(III) Reagents and Photoredox Catalysis Enable Decarboxylative Ynonylation under Mild Conditions.

    Science.gov (United States)

    Huang, Hanchu; Zhang, Guojin; Chen, Yiyun

    2015-06-26

    A combination of hypervalent iodine(III) reagents (HIR) and photoredox catalysis with visible light has enabled chemoselective decarboxylative ynonylation to construct ynones, ynamides, and ynoates. This ynonylation occurs effectively under mild reaction conditions at room temperature and on substrates with various sensitive and reactive functional groups. The reaction represents the first HIR/photoredox dual catalysis to form acyl radicals from α-ketoacids, followed by an unprecedented acyl radical addition to HIR-bound alkynes. Its efficient construction of an mGlu5 receptor inhibitor under neutral aqueous conditions suggests future visible-light-induced biological applications.

  15. New methods and reagents to improve the ferret model for human influenza infections

    DEFF Research Database (Denmark)

    Martel, Cyril Jean-Marie; Kirkeby, Svend; Aasted, Bent

    The ferret has been extensively used to study human influenza infections. However, its value as a model has suffered from the limited set of reagents and methods available for this animal. We have recently tested a large number of monoclonal antibodies cross-reacting with ferret CD markers (CD8, CD...... improvements of the model will aim at establishing a reliable RT-PCR for ferret cytokines, as well as investigating the location of influenza receptors and viral particles in the upper and lower respiratory tract via immunohistochemistry...

  16. Reagent Vibration Effect on the Stereodynamics for the C+CD→C2+D Reaction

    Institute of Scientific and Technical Information of China (English)

    XIE Ting-Xian; SHI Ying

    2011-01-01

    We study the effect of the reagent vibration of the CD on the stereodynamics of the C + CD→C2 +D reaction by using the quasi-classical trajectory method at a collision energy of 2.306 kcal/mol on the potential energy surface of the 12A' state [Boggio-Pasqua et al. Mol. Phys. 98(2000) 1925]. The vector correlation distributions p(θr) and the dihedral-angle distribution p(θr) as well as p(θr,φr) are calculated. In addition, two polarization-dependent generalized differential cross sections of the product are presented and discussed within a center-of-mass framework. The results show that the effect of reagent vibration can cause obviously different effects on the stereodynamics of the title reaction.%We study the effect of the reagent vibration of the CD on the stereodynamics of the C + CD → C2 +D reaction by using the quasi-classical trajectory method at a collision energy of 2.306 kcal/mol on the potential energy surface of the 12A' state [Boggio-Pasqua et al.Mol.Phys.98(2000)1925].The vector correlation distributions p(θΤ) and the dihedral-angle distribution p(φΤ) as well as p(θΤ,φΥ) are calculated.In addition,two polarizationdependent generalized differential cross sections of the product are presented and discussed within a center-of-mass framework.The results show that the effect of reagent vibration can cause obviously different effects on the stereodynamics of the title reaction.The studies of the chemical reaction dynamics of C+CH and its isotopic variants have received much attention theoretically[1-7] and experimentally.[8-11]The systems are very important in the investigation of atmospheric chemistry and combustion.[12]The branching ratios between the channels were measured by using the LIF[13] method.Compared with the rare experimental work,many theoretical studies have been performed on the title reaction.

  17. Photonic reagents for concentration measurement of flu-orescent proteins with overlapping spectra

    Science.gov (United States)

    Goun, Alexei; Bondar, Denys I.; Er, Ali O.; Quine, Zachary; Rabitz, Herschel A.

    2016-05-01

    By exploiting photonic reagents (i.e., coherent control by shaped laser pulses), we employ Optimal Dynamic Discrimination (ODD) as a novel means for quantitatively characterizing mixtures of fluorescent proteins with a large spectral overlap. To illustrate ODD, we simultaneously measured concentrations of in vitro mixtures of Enhanced Blue Fluorescent Protein (EBFP) and Enhanced Cyan Fluorescent Protein (ECFP). Building on this foundational study, the ultimate goal is to exploit the capabilities of ODD for parallel monitoring of genetic and protein circuits by suppressing the spectral cross-talk among multiple fluorescent reporters.

  18. Chemical enhancement of footwear impressions in blood on fabric - part 2: peroxidase reagents.

    Science.gov (United States)

    Farrugia, Kevin J; Savage, Kathleen A; Bandey, Helen; Ciuksza, Tomasz; Nic Daéid, Niamh

    2011-09-01

    This study investigates the optimisation of peroxidase based enhancement techniques for footwear impressions made in blood on various fabric surfaces. Four different haem reagents: leuco crystal violet (LCV), leuco malachite green (LMG), fluorescein and luminol were used to enhance the blood contaminated impressions. The enhancement techniques in this study were used successfully to enhance the impressions in blood on light coloured surfaces, however, only fluorescent and/or chemiluminescent techniques allowed visualisation on dark coloured fabrics, denim and leather. Luminol was the only technique to enhance footwear impressions made in blood on all the fabrics investigated in this study. PMID:21889107

  19. Evaluation of Fenton's Reagent and Activated Persulfate for Treatment of a Pharmaceutical Waste Mixture in Groundwater

    DEFF Research Database (Denmark)

    Bennedsen, Lars Rønn; Søgaard, Erik Gydesen; Kakarla, Prasad;

    Groundwater beneath the Kærgård Plantage megasite in Denmark are contaminated with a complex mixtu of pharmaceutical wastes, including sulfonamides, barbiturates, aniline, pyridine chlorinated solvents, mercury, and cyanide.  Regulatory agencies in Denmark are now in the process of evaluating...... is to identify the fate of mercury and cyanide consequent to the application of Fenton's reagent and activated persulfate.  Batch and continuous-flow column reactors will be used to measure mobilization of the mercury, cyanide and other metals both within the aqueous and vapor phases.   The collective chemical...

  20. Extractive properties of benzohydroxamic and N-benzoyl-benzohydroxamic acids as analytical reagents towards six transition metal ions

    International Nuclear Information System (INIS)

    Two hydroxamic acids were prepared: benzohydroxamic and N-benzoyl benzohydroxamic acids. The former was prepared by coupling the free hydrox amine with benzoyl chloride with the ratio 1:1 in alkaline medium, where as the latter by the same procedure with the ratio 1:2 respectively, they were identified by their melting points, elemental analysis of their nitrogen contents. infra-red spectrophotometry, as well as their nitrogen using elevation of boiling point and the titration method to determine their molecular weights. The two hydroxamic acids were used as analytical reagents for the extraction of the metals Cr(vi), Fe(III), Ti(iv), Co(II) and U(vi). Benzohydroxamic acid has a maximum extraction 99.55% for Cr.(vi) 3M H2SO4, of 90.16% for Ti(iv) at pH 2.0,of 80.56% for Co(II) at pH 8.0 and 98.01% for U(vi) at pH 6.0. N-benzoyl benzohydroxamic acid has a maximum extraction of 96.45% for Cr(vi) at 3M H2So4, of 90.82% for Fe(III) at pH 4.0, of 97.02% for V(v) at 3M H2So4, of 83.56% for Ti(iv) at pH 2.0, of 89.82% for Co(II) at pH 8.0 and of 97.16% for U(vi) at pH 6.0. at the same pH of maximum extraction using heavy matrix, synthetic sea-water, benzohydroxamic acid has maximum values of 91.08%, of 77.99%, of 91.39%, of 87.50 and of 93.17% for Cr(vi), Fe(III), V(v), Ti(iv), Co9II) and U(vi) respectively whereas n-benzoyl benzohydroxamic acid has maximum values of 86.17%, of 77.78%, of 89.61%, of 75.66%, of 79.63% and of 91.18% for Cr(vi), Fe(III), V(v), Ti(iv), Co(II) and U(vi) respectively. The ratio of metal to ligand was determined utilizing the continuous variation method. It was 1 :2, 1: 1, 1 : 1, 1 : 2, 1: 2 and 1 : 2 with respect to Cr(vi), fe(III), Ti(iv), Co(II) and U(vi) respectively.(Author)

  1. Preparation and Property of the Water Absorbent Hybrid Resin

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Water absorption material has been attracted much more attention for its wide use in soil and water conservation, agriculture, etc. But this material will actually apply in agriculture, soil and water conservation only when it is cheap enough. Pulp fiber and starch to prepare high absorbing-water resin is a good method for decreasing the cost [1,2]. However, it still has a long way to turn it into reality. Now the montmorillonite is widely used in preparing nanocomposites [3]. But used it in preparing absorbing-water resin has little report. In this article the water absorption hybrid resin has been prepared by one step intercalation polymerization method. In the process of intercalation the partly neutralization acrylic acid and urea have been used as intercalating reagent. Beside that, the urea also has been used as cross-linking agent.

  2. Preparation and Property of the Water Absorbent Hybrid Resin

    Institute of Scientific and Technical Information of China (English)

    WANG; YunPu

    2001-01-01

    Water absorption material has been attracted much more attention for its wide use in soil and water conservation, agriculture, etc. But this material will actually apply in agriculture, soil and water conservation only when it is cheap enough. Pulp fiber and starch to prepare high absorbing-water resin is a good method for decreasing the cost [1,2]. However, it still has a long way to turn it into reality.  Now the montmorillonite is widely used in preparing nanocomposites [3]. But used it in preparing absorbing-water resin has little report. In this article the water absorption hybrid resin has been prepared by one step intercalation polymerization method. In the process of intercalation the partly neutralization acrylic acid and urea have been used as intercalating reagent. Beside that, the urea also has been used as cross-linking agent.   ……

  3. Degradation of ion spent resin using the Fenton's reagent; Degradacao da resina de troca ionica utilizando o reagente de Fenton

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Leandro Goulart de

    2013-07-01

    The most common method for spent radioactive ion exchange resin treatment is its immobilization in cement, which reduces the radionuclides release into the environment. Although this method is efficient, it increases considerably the final volume of the waste due to the low incorporation capacity. The objective of this work was to develop a degradation method of spent resins arising from the nuclear research reactor located at the Nuclear and Energy Research Institute (IPEN-CNEN/SP), using an Advanced Oxidation Process (AOP) with Fenton's reagents. This method would allow a higher incorporation in cement. Three different resins were evaluated: cationic, anionic and a mixture of both resins. The reactions were conducted varying the catalyst concentration (25, 50, 100 and 150 mM), the volume of hydrogen peroxide (320 to 460 mL), and three different temperatures, 50, 60 and 70 deg C. Degradation of about 98% was achieved using a 50 mM catalyst solution and 330 mL of hydrogen peroxide solution. The most efficient temperature was 60 deg C. (author)

  4. The development of a human calcitonin radioimunoassay, with 'in house' reagent production, for application to the early diagnosis of medullary thyroid carcioma

    International Nuclear Information System (INIS)

    Reagent production for human Calcitonin (hCT) Radioimmunoassay (RIA) was carried out in our laboratory starting from a kind donation of human synthetic preparation from CIBA (Basel, Switzerland). This product was used for anti-hCT antibody production in rabbits and guinea-pigs and for radioiodination, according to two different methods: classical and stoichiometric Chloramine T techniques. The use of Sephadex G-50 in tracer purification allowed the obtainement of 125I-hCT free of high molecular weight contaminats. A repurification on polyacrylamide gel electrophoresis provided 125I-hCT of higher specific activity that presented specific binginds, to good quality antisera, of the same order of imported tracers (∼ 45%). Different antisera were obtained in rabbits and quinea-pigs, but only one (GP2-IPEN) could be used in such a dilution (1:4000) to provide highly sensitive curves (minimal detectable concentration < 70 pg/ml) presenting, however, very low specific bindings (7-10%). For this reason, in order to be able to set up a regular quality control of our hCT-RIA technique, an antiserum kindly donated by the Karolinska Institute (Stockholm, Sweden) was used. This way, through the use of an higher antibody dilution (1:8000), higher specific bindings (20-30%), higher sensitivies (< 30 pg/ml) and satisfactory precision were obtained. We consider this study a first approach to a complete national production of hCT-RIA reagents, that, at present moment, depends practically only from the obtainement of a high avidity anti-hCT antiserum. More has to be done on accuracy and correct clinical application of this assay to the screening of the familial form of Medullary Thyroid Carcinoma. We also emphasize the fact, due to our limited financial possibilities, all the work was carried out with great economy, taking advantage of previously set up techniques and of the experience already acquired in this field of work. (author)

  5. Recovery of ammonia in digestates of calf manure through a struvite precipitation process using unconventional reagents.

    Science.gov (United States)

    Siciliano, A; De Rosa, S

    2014-01-01

    Land spreading of digestates causes the discharge of large quantities of nutrients into the environment, which contributes to eutrophication and depletion of dissolved oxygen in water bodies. For the removal of ammonia nitrogen, there is increasing interest in the chemical precipitation of struvite, which is a mineral that can be reused as a slow-release fertilizer. However, this process is an expensive treatment of digestate because large amounts of magnesium and phosphorus reagents are required. In this paper, a struvite precipitation-based process is proposed for an efficient recovery of digestate nutrients using low-cost reagents. In particular, seawater bittern, a by-product of marine salt manufacturing and bone meal, a by-product of the thermal treatment of meat waste, have been used as low-cost sources of magnesium and phosphorus, respectively. Once the operating conditions are defined, the process enables the removal of more than 90% ammonia load, the almost complete recovery of magnesium and phosphorus and the production of a potentially valuable precipitate containing struvite crystals. PMID:24645466

  6. Effect of thiol reagents on functional properties and heme oxidation in the hemoglobin of Geochelone carbonaria.

    Science.gov (United States)

    Torsoni, M A; Viana, R I; Barros, B F; Stoppa, G; Cesquini, M; Ogo, S H

    1996-10-01

    The reaction of thiol reagents with G. carbonaria hemoglobin was studied, and the oxygen equilibrium and kinetic of oxidation of derivatives determined. The oxygen affinity and kinetic of oxidation of hemoglobin derivatives were modified to various extents depending on the nature of thiol reagents used. Diamide yielded approximately 80% polymeric hemoglobin, although the oxidation kinetic, and the functional properties, were practically invariant (T1/2 = 10.0 min.; P50 = 5.0 mm Hg at pH 7.4; alkaline Bohr effect = -0.64). Iodoacetamide did not modify the electrophoretic pattern significantly, although all the free SH groups of hemoglobin were alkylated. A P50 of 2.5 mmHg at pH 7.4 and the Bohr effect of -0.15 were obtained; the T1/2 of about 6.4 min. was shorter than that for un-modified Hb. Similar T1/2 were obtained for Hb treated with oxidized glutathione, which produced polymeric Hb and glutathionyl-Hb. The oxygen binding characteristics showed that both of Hb derivatives, glutathionyl-Hb and polymeric Hb, maintain the capacity to transport the gas. PMID:8896757

  7. Solution Versus Gas-Phase Modification of Peptide Cations with NHS-Ester Reagents

    Science.gov (United States)

    Mentinova, Marija; Barefoot, Nathan Z.; McLuckey, Scott A.

    2012-02-01

    A comparison between solution and gas phase modification of primary amine sites in model peptide cations with N-hydroxysuccinimide (NHS) ester reagents is presented. In all peptides, the site of modification in solution was directed to the N-terminus by conducting reactions at pH = 5, whereas for the same peptides, a lysine residue was preferentially modified in the gas phase. The difference in pKa values of the N-terminus and ɛ-amino group of the lysine allows for a degree of control over sites of protonation of the peptides in aqueous solution. With removal of the dielectric and multiple charging of the peptide ions in the gas phase, the accommodation of excess charge can affect the preferred sites of reaction. Interaction of the lone pair of the primary nitrogen with a proton reduces its nucleophilicity and, as a result, its reactivity towards NHS-esters. While no evidence for reaction of the N-terminus with sulfo-NHS-acetate was noted in the model peptide cations, a charge inversion experiment using bis[sulfosuccinimidyl] suberate, a cross-linking reagent with two sulfo-NHS-ester functionalities, showed modification of the N-terminus. Hence, an unprotonated N-terminus can serve as a nucleophile to displace NHS, which suggests that its lack of reactivity with the peptide cations is likely due to the participation of the N-terminus in solvating excess charge.

  8. Development of Lyophilized Loop-Mediated Isothermal Amplification Reagents for the Detection of Leptospira.

    Science.gov (United States)

    Chen, Hua-Wei; Weissenberger, Giulia; Ching, Wei-Mei

    2016-05-01

    Leptospirosis is considered to be the most widespread zoonosis. This worldwide emerging infectious disease is caused by the pathogenic species belonging to the genus Leptospira. Polymerase chain reaction (PCR)-based diagnostic assays have been developed for detecting Leptospira DNA in cell cultures and clinical samples. Because PCR requires specialized equipment and extensive end-user training, it is not suitable for routine work in resource-limited areas. We have developed a loop-mediated isothermal amplification (LAMP) assay to detect the presence of Leptospira in patient, animal and environmental samples using lyophilized reagents at a single temperature of around 63°C with a heating block. The sensitivity of this LAMP assay is very similar to the PCR method. The amplified DNA products can be visualized with the naked eyes using hydroxy naphthol blue or detected by the fluorescence signal of SYBR green dye in the reaction when an ultraviolet lamp or compact fluorescence tube scanner is used. This LAMP assay is simple, rapid, and can be performed with a water bath or heating block. The lyophilized LAMP reagents are stable for 3 months when stored at 4°C and 1 month when stored at 25°C, respectively. It is ideal for resource-limited settings where leptospirosis is endemic. PMID:27168577

  9. Metal Chemical Vapor Deposition: Design and Synthesis of New Source Reagents for Osmium Thin Films

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Treatment of β-diketone ligands, such as hfacH (hexafluoroacetylacetone) or tmhdH (2,2-dimethyl-3,5-heptanedione), with binary metal carbonyls Ru3(CO)12 or Os3(CO)12 in a stainless steel autoclave at elevated temperature afforded the corresponding mononuclear Ru or Os complexes 1, 2 and 3 in good yields. A second type of mononuclear Os CVD source reagent 4 has also been obtained from a reaction of Os3(CO)12 with 3 eq. of iodine under CO atmosphere. These four Ru and Os CVD source complexes are all relatively stable and highly volatile; thus, they can be utilized for depositing the respective metal thin-films with overall quality comparable or better than those deposited using the commercially available source reagents. The surface morphology, the purity and the crystallinity were identified by SEM micrograph, X-ray photoelectron spectroscopy, conductivity measurement and powder XRD, respectively. Possible reaction mechanisms leading to the formation of the metal deposit are presented.

  10. Metal Chemical Vapor Deposition: Design and Synthesis of New Source Reagents for Osmium Thin Films

    Institute of Scientific and Technical Information of China (English)

    YU; HuanLi

    2001-01-01

    Treatment of β-diketone ligands, such as hfacH (hexafluoroacetylacetone) or tmhdH (2,2-dimethyl-3,5-heptanedione), with binary metal carbonyls Ru3(CO)12 or Os3(CO)12 in a stainless steel autoclave at elevated temperature afforded the corresponding mononuclear Ru or Os complexes 1, 2 and 3 in good yields. A second type of mononuclear Os CVD source reagent 4 has also been obtained from a reaction of Os3(CO)12 with 3 eq. of iodine under CO atmosphere. These four Ru and Os CVD source complexes are all relatively stable and highly volatile; thus, they can be utilized for depositing the respective metal thin-films with overall quality comparable or better than those deposited using the commercially available source reagents. The surface morphology, the purity and the crystallinity were identified by SEM micrograph, X-ray photoelectron spectroscopy, conductivity measurement and powder XRD, respectively. Possible reaction mechanisms leading to the formation of the metal deposit are presented.  ……

  11. OPTIMIZING CONDITIONS FOR SPECTROPHOTOMETRIC DETERMINATION OF TOTAL POLYPHENOLS IN WINES USING FOLIN-CIOCALTEU REAGENT

    Directory of Open Access Journals (Sweden)

    Daniel Bajčan

    2013-02-01

    Full Text Available Wine is a complex beverage that obtains its properties mainly due to synergistic effect of alcohol, organic acids, arbohydrates, as well as the phenolic and aromatic substances. At present days, we can observe an increased interest in the study of polyphenols in wines that have antioxidant, antimicrobial, anti-inflammatory, anti-cancer and many other beneficial effects. Moderate and regular consumption of the red wine especially, with a high content of phenolic compounds, has a beneficial effect on human health. The aim of this work was to optimize conditions for spectrophotometric determination of total polyphenols in winwas to optimize conditions for spectrophotometric determination of total polyphenols in winwas to optimize conditions for spectrophotometric determination of total polyphenols in winwas to optimize conditions for pectrophotometric determination of total polyphenols in wine using Folin-Ciocaulteu reagent. Based on several studies, in order to minimize chemical use and optimize analysis time, we have proposed a method for the determination of total polyphenols using 0.25 ml Folin-Ciocaulteu reagent, 3 ml of 20% Na2CO3 solution and time of coloring complex 1.5 hour. We f

  12. Bacteriophage Mediates Efficient Gene Transfer in Combination with Conventional Transfection Reagents

    Directory of Open Access Journals (Sweden)

    Amanda Donnelly

    2015-12-01

    Full Text Available The development of commercially available transfection reagents for gene transfer applications has revolutionized the field of molecular biology and scientific research. However, the challenge remains in ensuring that they are efficient, safe, reproducible and cost effective. Bacteriophage (phage-based viral vectors have the potential to be utilized for general gene transfer applications within research and industry. Yet, they require adaptations in order to enable them to efficiently enter cells and overcome mammalian cellular barriers, as they infect bacteria only; furthermore, limited progress has been made at increasing their efficiency. The production of a novel hybrid nanocomplex system consisting of two different nanomaterial systems, phage vectors and conventional transfection reagents, could overcome these limitations. Here we demonstrate that the combination of cationic lipids, cationic polymers or calcium phosphate with M13 bacteriophage-derived vectors, engineered to carry a mammalian transgene cassette, resulted in increased cellular attachment, entry and improved transgene expression in human cells. Moreover, addition of a targeting ligand into the nanocomplex system, through genetic engineering of the phage capsid further increased gene expression and was effective in a stable cell line generation application. Overall, this new hybrid nanocomplex system (i provides enhanced phage-mediated gene transfer; (ii is applicable for laboratory transfection processes and (iii shows promise within industry for large-scale gene transfer applications.

  13. Laser ablation construction of on-column reagent addition devices for capillary electrophoresis.

    Science.gov (United States)

    Rezenom, Yohannes H; Lancaster, Joseph M; Pittman, Jason L; Gilman, S Douglass

    2002-04-01

    A simple and reproducible technique for constructing perfectly aligned gaps in fused-silica capillaries has been developed for postcolumn reagent addition with capillary electrophoresis. This technique uses laser ablation with the second harmonic of a Nd:YAG laser (532 nm) at 13.5 mJ/pulse and a repetition rate of 15 Hz to create these gaps. A capillary is glued to a microscope slide and positioned at the focal point of a cylindrical lens using the focused beam from a laser pointer as a reference. Gaps of 14.0 +/- 2.2 microm (n = 33) at the bore of the capillary are produced with a success rate of 94% by ablation with 400 pulses. This simple method of gap construction requires no micromanipulation under a microscope, hydrofluoric acid etching, or use of column fittings. These structures have been used for reagent addition for postcolumn derivatization with laser-induced fluorescence detection and have been tested for the separation of proteins and amino acids. Detection limits of 6 x 10(-7) and 1 x 10(-8) M have been obtained for glycine and tranferrin, respectively. Separation efficiencies obtained using these gap reactors range from 38,000 to 213,000 theoretical plates. PMID:12043598

  14. An enzymatic immunoassay microfluidics integrated with membrane valves for microsphere retention and reagent mixing.

    Science.gov (United States)

    Ren, Li; Wang, Jian-Chun; Liu, Wenming; Tu, Qin; Liu, Rui; Wang, Xueqin; Xu, Juan; Wang, Yaolei; Zhang, Yanrong; Li, Li; Wang, Jinyi

    2012-05-15

    The present study presents a new microfluidic device integrated with pneumatic microvalves and a membrane mixer for enzyme-based immunoassay of acute myocardial infarction (AMI) biomarkers, namely, myoglobin, and heart-type fatty acid binding protein (H-FABP). Superparamagnetic microspheres with carboxyl groups on their surfaces were used as antibody solid carriers. A membrane mixer consisting of four ψ-type membrane valves was assembled under the reaction chamber for on-chip performing microsphere trapping and reagent mixing. The entire immunoassay process, including microsphere capture, reagent input, mixing, and subsequent reaction, was accomplished on the device either automatically or manually. The post-reaction substrate resultant was analyzed using a microplate reader. The results show that the average absorbance value is correlated with the concentration of cardiac markers, in agreement with the results obtained using a conventional microsphere-based immunoassay; this indicated that the proposed on-chip immunoassay protocol could be used to detect both myoglobin and H-FABP. The minimum detectable concentration is 5 ng/mL for myoglobin and 1 ng/mL for H-FABP.

  15. Selective and sensitive colorimetric detection of stringent alarmone ppGpp with Fenton-like reagent.

    Science.gov (United States)

    Zheng, Lin Ling; Huang, Cheng Zhi

    2014-12-01

    Stringent alarmone, namely, guanosine 3'-diphosphate-5'-diphosphate (ppGpp), is a global regulator that plays a critical role in the survival, growth, metabolism, and many other vital processes of microorganisms. Because of its structural similarity to normal nucleotides, it is also a challenge for the selective and sensitive detection of ppGpp nowadays. Herein, we developed a colorimetric method for the selective detection of ppGpp by inhibiting the redox reaction between Fenton-like reagent (composed of Fe(3+) and H2O2) with 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS). Owing to the strong coordination affinity between ppGpp and Fe(3+), the chromogenic reaction between ABTS and Fenton-like reagent, occurred in aqueous medium at 37 °C and resulted in a bluish-green solution, which was inhibited with the addition of ppGpp. This phenomenon forms the basis for the colorimetric detection of ppGpp, with a detection limit of 0.19 μM and good selectivity for ppGpp over other nucleotides and anions. Furthermore, the results could be visualized by the naked eye, and the sensitivity of the naked-eye observation could even be further improved with the aid of the introduction of a background color.

  16. 乙型和丙型肝炎病毒感染检测试剂的标准化:问题与对策%Problems and solutions on standardization of reagents for detection of HBV and HCV infection

    Institute of Scientific and Technical Information of China (English)

    李金明

    2010-01-01

    国产HBV和HCV感染检测试剂与国外同类试剂相比,存在过度追求操作简便化和定量检测缺乏量值溯源等问题.将HBsAg的双抗体夹心ELISA试剂的"一步法"改为"两步法",并保证足够的温育时间;同时,选择多个单抗作为包被抗体,不但可以避免"钩状效应"或HBsAg变异造成的假阴性结果,而且将改善试剂的测定下限.将HBV和HCV核酸检测试剂的标本处理由简单的煮沸裂解改为核酸纯化,并增加用于核酸提取的标本量和提取后扩增加样量,同时加入内标,不但可以改善测定下限和检测重复性,而且可以有效地监控假阴性结果的出现.定量检测试剂标准品系列与国家或国际标准物质的量值溯源,可使不同试剂得到的检测结果具有可比性.%Compared with commercial reagents manufactured by foreign companies for detection of HBV and HCV infection, domestic reagents have poorer performance because of the over-pursuit of easy operation and lack of metrological traceability in quantitative measurement. If "two-step" sandwich ELISA model and multiple monoclonal coating antibodies were used, false-negative results caused by the hook-effect and HBsAg mutant would be avoided. Moreover, sufficient incubation time in each step would improve the detection-limit of the reagents. By replacing the boiling lysis with nucleic acid purification in sample preparation and increasing the sample volume of nucleic acid purification and amplification detection could improve the detection-limit and reproducibility of HBV and HCV nucleic acid testing. The use of internal control could effectively monitor the of false negative results as well Application of international or national reference materials for metrological traceability of calibrators in reagents also plays an important role in assuring result concordance among different commercial reagent kits, methods and clinical laboratories.

  17. A importância da qualidade da água reagente no laboratório clínico The importance of water quality in clinical laboratory reagent

    Directory of Open Access Journals (Sweden)

    Maria Elizabete Mendes

    2011-06-01

    Full Text Available A água é um reagente utilizado na maioria dos testes laboratoriais e por isso deve seguir um padrão de controle de qualidade rigoroso. O fornecimento urbano de água apresenta moléculas orgânicas, íons inorgânicos, partículas, coloides, gases, bactérias e seus produtos, que podem alterar os resultados dos exames laboratoriais e causar eventuais erros e falhas mecânicas em equipamentos analíticos. Para remover essas impurezas, é necessário recorrer a uma combinação de tecnologias de purificação. Há várias organizações que especificam normas sobre a água reagente, a fim de minimizar sua interferência nos ensaios laboratoriais. A maioria dos laboratórios utiliza as normas estabelecidas pelo Clinical and Laboratory Standards Institute (CLSI que classifica a água em: clinical laboratory reagent water (CLRW, special reagent water (SRW e instrumental feed water (IFW. O monitoramento da qualidade é realizado pela determinação de resistividade, condutividade, carbono orgânico total (TOC, controle microbiológico e endotoxinas. Os parâmetros são avaliados de acordo com a periodicidade estabelecida pela norma utilizada. Neste artigo, discutem-se a importância da água utilizada nos procedimentos laboratoriais, o controle da qualidade e as interferências nos ensaios laboratoriais.Water is a reagent used in most laboratory tests and, therefore, must follow stringent quality control standards. The urban water supply has organic molecules, inorganic ions, particles, colloids, gases, bacteria and their products, which may alter laboratory test results and cause occasional errors and mechanical failures in diagnostic equipment. To remove these impurities, it is necessary to use a combination of purification technologies. There are several organizations that specify reagent water standards to minimize its interference in laboratory assays. Most laboratories set standards established by the Clinical and Laboratory Standards

  18. Molecular and nanoparticle postcolumn reagents for assay of low-molecular-mass biothiols using high-performance liquid chromatography.

    Science.gov (United States)

    Zu, Yanbing

    2009-10-15

    Determination of low-molecular-mass (LMM) biothiols in biological matrixes is of importance in the studies of their related bio-processes and for the clinical diagnostics of a variety of diseases. Standard method for the assay of the small biothiols is in demand. Postcolumn techniques used in high-performance liquid chromatography (HPLC) allow automation of the derivatization step and, therefore, are suitable for standardization of HPLC analysis. This paper gives an overview of the existing reaction systems useful for the postcolumn assay of the LMM biothiol molecules in conjunction with HPLC. The postcolumn reagents are classified by the types of their reactions with thiol-containing compounds. The chemical reactivity and selectivity as well as the spectroscopic characteristics of the postcolumn reagents have been addressed. The emerging strategies of using nanoparticles as thiol-reactive reagents and their applications in postcolumn detection of the LMM biothiols have also been discussed in detail. PMID:19442593

  19. Tagging the Untaggable: A Difluoroalkyl-Sulfinate Ketone-Based Reagent for Direct C-H Functionalization of Bioactive Heteroarenes.

    Science.gov (United States)

    Gnaim, Samer; Scomparin, Anna; Li, Xiuling; Baran, Phil S; Rader, Christoph; Satchi-Fainaro, Ronit; Shabat, Doron

    2016-09-21

    We have developed a new difluoroalkyl ketal sulfinate salt reagent suitable for direct derivatization of heteroarene C-H bonds. The reagent is capable of introducing a ketone functional group on heteroarene bioactive compounds via a one-pot reaction. Remarkably, in three examples the ketone analog and its parent drug had almost identical cytotoxicity. In a representative example, the ketone analog was bioconjugated with a delivery vehicle via an acid-labile semicarbazone linkage and with a photolabile protecting group to produce the corresponding prodrug. Controlled release of the drug-ketone analog was demonstrated in vitro for both systems. This study provides a general approach to obtain taggable ketone analogs directly from bioactive heteroarene compounds with limited options for conjugation. We anticipate that this sodium ketal-sulfinate reagent will be useful for derivatization of other heteroarene-based drugs to obtain ketone-taggable analogs with retained efficacy. PMID:27494153

  20. 1-Methylpyridinium-4-(4-phenylmethanethiosulfonate) iodide, MTS-MPP+, a novel scanning cysteine accessibility method (SCAM) reagent for monoamine transporter studies

    OpenAIRE

    Gallardo-Godoy, Alejandra; Torres-Altoro, Melissa I.; White, Kellie J.; Barker, Eric L.; Nichols, David E.

    2006-01-01

    A novel substituted cysteine accessibility method (SCAM) reagent was developed for monoamine uptake transporters. The new reagent, MTS-MPP+, was a derivative of the neurotoxin and transporter substrate MPP+. MTS-MPP+ labeled cysteine residues introduced into the serotonin transporter protein. Although it did not prove to be a substrate, as is MPP+, it appears to label cysteine residues lining the permeation pore of the transporter more readily than currently-available nonspecific SCAM reagents.

  1. Delivery of Genome Editing Reagents to Hematopoietic Stem/Progenitor Cells.

    Science.gov (United States)

    Hoban, Megan D; Romero, Zulema; Cost, Gregory J; Mendel, Matthew; Holmes, Michael; Kohn, Donald B

    2016-01-01

    This unit describes the protocol for the delivery of reagents for targeted genome editing to CD34(+) hematopoietic stem/progenitor cells (HSPCs). Specifically, this unit focuses on the process of thawing and pre-stimulating CD34(+) HSPCs, as well as the details of their electroporation with in vitro-transcribed mRNA-encoding site-specific nucleases [in this case zinc-finger nucleases (ZFNs)]. In addition, discussed is delivery of a gene editing donor template in the form of an oligonucleotide or integrase-defective lentiviral vector (IDLV). Finally, an analysis of cell survival following treatment and downstream culture conditions are presented. While optimization steps might be needed for each specific application with respect to nuclease and donor template amount, adherence to this protocol will serve as an excellent starting point for this further work. PMID:26840227

  2. Extraction equilibria of rare earths by a new reagent (2-ethylhexyl-3-pentadecylphenyl) phosphoric acid.

    Science.gov (United States)

    Sreelatha, S; Rao, T P; Narayanan, C S; Damodaran, A D

    1994-03-01

    A new reagent (2-ethylhexyl-3-pentadecylphenyl) phosphoric acid (EPPA = HR) was synthesized from cardanol (I, 37300-39-5) and was used to investigate the extraction behaviour of lanthanum(III), europium(III) and lutetium(III) from hydrochloric acid solutions. The species extracted were found to be Ln(HR(2))(3) (where Ln = La(III) or Eu(III) or Lu(III)). The extraction behaviour of the above lanthanides has also been compared with yttrium and other rare earths. It was observed that the extraction increases with increase in atomic number of rare earths. In addition, the extraction efficiency of EPPA has also been compared with well known acidic organophosphorus extractants like di-2-ethylhexyl phosphoric acid (DEHPA), 2-ethylhexyl-mono-2-ethylhexyl phosphoric acid (EHEHPA). PMID:18965945

  3. A specific Tween-80-Rhodamine S-MWNTs phosphorescent reagent for the detection of trace calcitonin

    Energy Technology Data Exchange (ETDEWEB)

    Liu Jiaming, E-mail: zzsyliujiaming@163.com [Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou, 363000 (China); Huang Xiaomei; Zhang Lihong; Zheng Zhiyong [Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou, 363000 (China); Department of Food and Biological Engineering, Zhangzhou Institute of Technology, Zhangzhou, 363000 (China); Lin Xuan; Zhang Xiaoyang; Jiao Li; Cui Malin [Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou, 363000 (China); Jiang Shulian [Fujian Provincial Bureau of Quality and Technical Supervision, Zhangzhou, 363000 (China); Lin Shaoqin [Department of Biochemistry, Fujian Education College, Fuzhou 350001 (China)

    2012-09-26

    Graphical abstract: A new Tween-80-Rhodamine S-water-soluble multi-walled carbon nanotubes (Tween-80-Rhod.S-MWNTs-EDC-NHS, TRMEN) phosphorescent labelling reagent was developed. High sensitive solid substrate room temperature phosphorescence immunoassay (SSRTPIA) for the determination of calcitonin (CT) in human serum and the prediction of human diseases based on the TRMEN could be used to label anti-calcitonin antibody (Ab{sub CT}) to form the TRMEN-Ab{sub CT} labelling product, which could take high specific immunoreaction with CT causing that the {Delta}I{sub p} of the system was linear to the content of CT. Moreover, the reaction mechanisms of both labelling Ab{sub CT} by TRMEN and SSRTPIA for the determination of trace CT were discussed. This research not only provides a new hormones analysis method, but also expands the application field of MWNTs and promotes the development of SSRTP and IA. --Highlights: Black-Right-Pointing-Pointer A Tween-80-Rhodamine S-multi-walled carbon nanotubes labelling reagent was developed. Black-Right-Pointing-Pointer The phosphorescence immunoassay was established for the determination of calcitonin. Black-Right-Pointing-Pointer This method has been applied to determine CT and the prediction of diseases. Black-Right-Pointing-Pointer The structure of MWNTs was characterized with SEM and IR. Black-Right-Pointing-Pointer The mechanisms for both determining trace CT and labelling Ab{sub CT} were discussed. - Abstract: The present study proposed a simple sensitive and specific immunoassay for the quantification of calcitonin (CT) in human serum with water-soluble multi-walled carbon nanotubes (MWNTs). The -COOH group of MWNTs could react with the -NH- group of rhodamine S (Rhod.S) molecules to form Rhod.S-MWNTs, which could emit room temperature phosphorescence (RTP) on acetate cellulose membrane (ACM) and react with Tween-80 to form micellar compound. Tween-80-Rhod.S-MWNTs (TRM), as a phosphorescent labelling reagent, could

  4. Study on the removal of urea in wastewater using Fenton reagent

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The great amount of NH3-N produced in biological hydrolysis process of high concentration urea can inhibit the growth of microorganisms. In allusion to this problem, the Fenton reagent was used to treat high concentration urea wastewater. And the optimum conditions of this experiment were employed as follows: Fe (Ⅱ) -H2O2mole ratio was 1/3.53, H2O2 was 4 mL (corresponding to 35.30 mmol) , pH was 3.0 -3.5. Then the experiment shows that the urea concentration decreases from 500 mg/L to less than 2 mg/L, or is even not detected; under the same dose of H2O2 , repetitious addition does better than one-off addition; the reaction time within one minute or to be prolonged has little influence on removal effect. The results verify feasibility of this method.

  5. Assay and purification of Fv fragments in fermenter cultures: design and evaluation of generic binding reagents.

    Science.gov (United States)

    Berry, M J; Wattam, T A; Willets, J; Lindner, N; de Graaf, T; Hunt, T; Gani, M; Davis, P J; Porter, P

    1994-01-01

    Fv fragments whose genes have been cloned using common PCR primers carry identical peptide motifs at their termini. We have raised antibodies against the C-terminal motif of the VH chain GQGTTVTVSS and evaluated their utility as reagents for the assay and purification of Fvs in the fermenter culture. Three different Fvs were included in the investigation. We found that the motif was exposed and available for capture when Fv fragments were blotted onto nitrocellulose paper or adsorbed directly onto microtiter plates. In contrast, the motif was either partially or totally obscured when the Fv was complexed with immobilised antigen or when free in solution. This reactivity profile enabled us to develop a general-purpose assay for Fv protein, but not a general-purpose assay for monitoring active Fv. The apparent inaccessibility of the C-terminus of VH conflicts with currently held views on the three-dimensional structure of these molecules. PMID:7508476

  6. Assay and purification of Fv fragments in fermenter cultures: design and evaluation of generic binding reagents.

    Science.gov (United States)

    Berry, M J; Wattam, T A; Willets, J; Lindner, N; de Graaf, T; Hunt, T; Gani, M; Davis, P J; Porter, P

    1994-01-01

    Fv fragments whose genes have been cloned using common PCR primers carry identical peptide motifs at their termini. We have raised antibodies against the C-terminal motif of the VH chain GQGTTVTVSS and evaluated their utility as reagents for the assay and purification of Fvs in the fermenter culture. Three different Fvs were included in the investigation. We found that the motif was exposed and available for capture when Fv fragments were blotted onto nitrocellulose paper or adsorbed directly onto microtiter plates. In contrast, the motif was either partially or totally obscured when the Fv was complexed with immobilised antigen or when free in solution. This reactivity profile enabled us to develop a general-purpose assay for Fv protein, but not a general-purpose assay for monitoring active Fv. The apparent inaccessibility of the C-terminus of VH conflicts with currently held views on the three-dimensional structure of these molecules.

  7. Use of Ionic Liquid as Green Catalyst, Reagent as Well as Reaction Medium in Chemical Transformations

    Institute of Scientific and Technical Information of China (English)

    Brindaban C. Ranu

    2005-01-01

    @@ 1Introduction The toxic and volatile nature of many organic solvents, particularly chlorinated hydrocarbons that are widely used in organic synthesis have posed a serious threat to the environment. Thus, design of organic solvent - free reaction and use of alternative green solvents like water, supercritical fluids, and ionic liquids have received tremendous attention in recent times in the area of green synthesis. The ionic liquids have been the subject of considerable current interest as environmentally benign reaction media in organic synthesis because of their unique properties of nonvolatility, noninf1ammability, and recyclability among others and during last few years ionic liquids have been successfully employed as green solvents for a variety of important reactions.However, the ability of ionic liquid as a clean catalyst and reagent has not been explored to any great extent although it is of much importance in the context of green synthesis.

  8. Remediation of hydrocarbons in crude oil-contaminated soils using Fenton's reagent.

    Science.gov (United States)

    Ojinnaka, Chukwunonye; Osuji, Leo; Achugasim, Ozioma

    2012-11-01

    Sandy soil samples spiked with Bonny light crude oil were subsequently treated with Fenton's reagent at acidic, neutral, and basic pH ranges. Oil extracts from these samples including an untreated one were analyzed 1 week later with a gas chromatograph to provide evidence of hydrocarbon depletion by the oxidant. The reduction of three broad hydrocarbon groups-total petroleum hydrocarbon (TPH); benzene, toluene, ethylbenzene, and xylene (BTEX); and polycyclic aromatic hydrocarbon (PAH) were investigated at various pHs. Hydrocarbon removal was efficient, with treatment at the acidic pH giving the highest removal of about 96% for PAH, 99% for BTEX, and some TPH components experiencing complete disappearance. The four-ringed PAHs were depleted more than their three-ringed counterparts at the studied pH ranges.

  9. A novel fluorescent reagent for recognition of triplex DNA with high specificity and selectivity.

    Science.gov (United States)

    Chen, Zongbao; Zhang, Huimi; Ma, Xiaoming; Lin, Zhenyu; Zhang, Lan; Chen, Guonan

    2015-11-21

    A fluorescent agent (DMT) was screened for recognizing triplex DNA with a specific and selective characteristic, which was embedded into the triplex DNA structure. The triplex DNA was firstly formed by a complementary target sequence through two distinct and sequential events. The conditions including pH and hybridization time, fluorescent agent concentration and embedding time were optimized in the experiment. Under the optimum conditions, the fluorescence signal was enhanced up to 9-fold in comparison with the DMT embedding into the ssDNA, dsDNA and G-quadruplexes. Under the same fluorescence conditions, the changes of the fluorescence signal were also investigated by several kinds of base mismatched DNAs in the experiment. The results showed that our biosensor provided excellent discrimination efficiency toward the perfectly mismatched target DNA with no formation of triplex DNA. We preliminarily deduced the mechanism of the fluorescent reagent for recognizing triplex DNA with high specificity and selectivity. PMID:26456316

  10. Spectrophotometric total protein assay with copper(II)-neocuproine reagent in alkaline medium.

    Science.gov (United States)

    Sözgen, Kevser; Cekic, Sema Demirci; Tütem, Esma; Apak, Resat

    2006-02-28

    Total protein assay was made using copper(II)-neocuproine (Nc) reagent in alkaline medium (with the help of a hydroxide-carbonate-tartarate solution) after 30min incubation at 40 degrees C. The absorbance of the reduction product, Cu(I)-Nc complex, was recorded at 450nm against a reagent blank. The absorptivity of the developed method for bovine serum albumin (BSA) was 0.023lmg(-1)cm(-1), greater than that of Lowry assay (0.0098), and much greater than that of Cu(II)-bicinchoninic acid (BCA) assay (0.00077). The linear range of the developed method (8-100mgl(-1) BSA) was as wide as that of Lowry, and much wider than that of BCA (200-1000mgl(-1) BSA) assay. The sensitivity of the method was greater than those of Cu-based assays (biuret, Lowry, and BCA) with a LOD of 1mgl(-1) BSA. The within-run and between-run precisions as RSD were 0.73 and 1.01%, respectively. The selectivity of the proposed method for protein was much higher than those of dye-binding and Lowry assays: Most common interferents to other protein assays such as tris, ethanolamine, deoxycholate, CsCl, citrate, and triton X-100 were tolerated at 100-fold concentrations in the analysis of 10mgl(-1) BSA, while the tolerance limits for other interferents, e.g., (NH(4))(2)SO(4) and acetylsalicylic acid (50-fold), SDS (25-fold), and glycerol (20-fold) were at acceptable levels. The redox reaction of Cu(II)-Nc as an outer-sphere electron transfer agent with the peptide bond and with four amino acid residues (cystine, cysteine, tryptophan, and tyrosine) was kinetically more favourable than that of Cu(II) alone in the biuret assay. Since the reduction product of Cu(II) with protein, i.e., Cu(I), was coordinatively saturated with Nc in the stable Cu(Nc)(2)(+) chelate, re-oxidation of the formed Cu(I) with Fenton-like reactions was not possible, thereby preventing a loss of chromophore. After conventional protein extraction, precipitation, and redissolution procedures, the protein contents of the minced meat

  11. Asymmetric cyanation of imines via dipeptide-derived organophosphine dual-reagent catalysis

    Science.gov (United States)

    Wang, Hong-Yu; Zheng, Chang-Wu; Chai, Zhuo; Zhang, Jia-Xing; Zhao, Gang

    2016-09-01

    Over the past few decades, enantioselective phosphine organocatalysis has evolved rapidly into a highly efficient catalytic strategy for a range of useful reactions. However, as restricted by the traditional catalytic modes, some important reactions, such as asymmetric Strecker-type reactions, have thus far been out of reach of this strategy. Reported herein is an application of enantioselective phosphine organocatalysis for asymmetric Strecker-type reactions, enabled by a dual-reagent catalyst system in which the key organophosphorus zwitterion intermediate, generated in situ by mixing a chiral dipeptide-derived multifunctional organophosphine with methyl acrylate, is used as a highly efficient chiral Lewis base catalyst. The high efficiency of this catalytic system is demonstrated in the asymmetric cyanation of isatin-derived ketimines and azomethine aldimines as well as in the kinetic resolution of racemic 3-substituted azomethines. Mechanistic studies provide experimental evidence for the intermediacy of the putative zwitterion and its role as a catalytically active Lewis base.

  12. Pioneering Metal-Free Oxidative Coupling Strategy of Aromatic Compounds Using Hypervalent Iodine Reagents.

    Science.gov (United States)

    Kita, Yasuyuki; Dohi, Toshifumi

    2015-10-01

    We started our hypervalent iodine research about 30 years ago in the mid-1980s. We soon successfully developed the single-electron-transfer oxidation ability of a hypervalent iodine reagent, specifically, phenyliodine(III) bis(trifluoroacetate) (PIFA), toward aromatic rings of phenyl ethers for forming aromatic cation radicals. This was one of the exciting and unexpected events in our research studies so far, and the discovery was reported in 1991. It also led to the next challenge, developing the metal-free oxidative couplings for C-H functionalizations and direct couplings between the C-H bonds of valuable aromatic compounds in organic synthesis. In order to realize the effective oxidative coupling, pioneering new aromatic ring activations was essential and several useful methodologies have been found for oxidizable arenes. The achievements regarding this objective obtained in our continuous research are herein summarized with classification of the aromatic ring activation strategies.

  13. A novel method for the spectrophotometric determination of cefradine by using sodium nitroprusside as chromogenic reagent

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A novel method is developed for the determination of cefradine by using sodium nitroprusside as chromogenic reagent. The experiment indicates that a russety product is formed by the reaction of cefradine with sodium nin'oprusside in basic solution, and the maximum absorption wavelength (λmax) of russety product is 505 nm. And the sensitization of tetradecyl benzyl dimethyl ammonium chloride for the reaction of cefradine with sodium nitroprusside is remarkable. The apparent molar absorption coefficient (ε505)is 2.81 x 103 L/mol cm. The linear equation is A = 0.0657 + 0.00804C (μg/mL) in the range of 1.50-55.0 μg/mL of cefradine with a correlation coefficient r = 0.9992, and the detection limit is 1.38 μg/mL. This method has been applied to determine cefradine in capsule and tablet samples.

  14. Spectrophotometric determination of ajmaline and brucine by Folin Ciocalteu’s reagent

    Directory of Open Access Journals (Sweden)

    ARCHANA SAHU

    2003-09-01

    Full Text Available A rapid and simple spectrophotometric procedure is described for the determination of ajmaline and brucine. The method is based on the development of blue coloured product due to reduction of tungstate and/or molybdate in Folin Ciocalteu’s reagent (FCR by ajmaline and brucine in alkaline medium. The colour is stable for more than 48 h. The chromogenic reaction has lmax at 540 nm with molar absorptivity 1.64×104 and 2.37×103 l mol-1 cm-1 in the Beer’s law range 1–8 mg ml-1 and 10–100 mg ml-1 for ajmaline and brucine, respectively.

  15. Catalytic enantioselective addition of organoboron reagents to fluoroketones controlled by electrostatic interactions

    Science.gov (United States)

    Lee, Kyunga; Silverio, Daniel L.; Torker, Sebastian; Robbins, Daniel W.; Haeffner, Fredrik; van der Mei, Farid W.; Hoveyda, Amir H.

    2016-08-01

    Organofluorine compounds are central to modern chemistry, and broadly applicable transformations that generate them efficiently and enantioselectively are in much demand. Here we introduce efficient catalytic methods for the addition of allyl and allenyl organoboron reagents to fluorine-substituted ketones. These reactions are facilitated by readily and inexpensively available catalysts and deliver versatile and otherwise difficult-to-access tertiary homoallylic alcohols in up to 98% yield and >99:1 enantiomeric ratio. Utility is highlighted by a concise enantioselective approach to the synthesis of the antiparasitic drug fluralaner (Bravecto, presently sold as the racemate). Different forms of ammonium-organofluorine interactions play a key role in the control of enantioselectivity. The greater understanding of various non-bonding interactions afforded by these studies should facilitate the future development of transformations that involve fluoroorganic entities.

  16. Proteomic analysis of Trypanosoma cruzi developmental stages using isotope-coded affinity tag reagents.

    Science.gov (United States)

    Paba, Jaime; Ricart, Carlos A O; Fontes, Wagner; Santana, Jaime M; Teixeira, Antonio R L; Marchese, Jason; Williamson, Brian; Hunt, Tony; Karger, Barry L; Sousa, Marcelo V

    2004-01-01

    Comparative proteome analysis of developmental stages of the human pathogen Trypanosoma cruzi was carried out by isotope-coded affinity tag technology (ICAT) associated with liquid cromatography-mass spectrometry peptide sequencing (LC-MS/MS). Protein extracts of the protozoan trypomastigote and amastigote stages were labeled with heavy (D8) and light (D0) ICAT reagents and subjected to cation exchange and avidin affinity chromatographies followed by LC-MS/MS analysis. High confidence sequence information and expression levels for 41 T. cruzi polypeptides, including metabolic enzymes, paraflagellar rod components, tubulins, and heat-shock proteins were reported. Twenty-nine proteins displayed similar levels of expression in both forms of the parasite, nine proteins presented higher levels in trypomastigotes, whereas three were more expressed in amastigotes. PMID:15253433

  17. Visual identification of alkaloids in some medicinal plants: common alkaloid reagents versus bromocresol green

    Directory of Open Access Journals (Sweden)

    Shamsa F, Esfahani HR, Gamooshi RA

    2008-07-01

    Full Text Available "n Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Background: Alkaloids are a group of nitrogenous compounds with potential effects on the physiological behavior of human and animals. Some of these compounds are considered important drugs in modern medicine, such as atropine and morphine. Plants are considered the most important source of alkaloids. Therefore, investigating the presence of alkaloids in different plants is very important. Usually, alkaloids in plants are identified by methods such as those of Dragendorf, Wagner and Meyer, among others, which require milligrams of alkaloids for identification. In the present study, a fast and sensitive procedure for detecting of alkaloids in plants is presented.   "n"nMethods: Twelve dried plants samples were investigated for the presence alkaloids. After extracting the total alkaloid into methanol using a Soxhlet extractor, a few milligrams of the extract was transferred to a separatory funnel, buffered to pH 4.7, the bromocresol green (BCG solution (10-4 M was added, mixed and extracted with CHCl3 until a yellow color was observed in the CHCl3 layer, indicating the presence of the alkaloid. The crude extracts were also investigated by the standard methods of Dragendorf, Wagner and Meyer for the presence of alkaloids.   "n"nResults: Investigation of the 12 plant samples for the presence of alkaloids by the standard reagents of Dragendorf, Wagner, and Meyer showed that only Camelia sinensis (flowers, Echium amoenum Fisch & Mey (flowers, and Stachys (aerial parts are devoid

  18. Azidopropylvinylsulfonamide as a New Bifunctional Click Reagent for Bioorthogonal Conjugations: Application for DNA-Protein Cross-Linking.

    Science.gov (United States)

    Dadová, Jitka; Vrábel, Milan; Adámik, Matej; Brázdová, Marie; Pohl, Radek; Fojta, Miroslav; Hocek, Michal

    2015-11-01

    N-(3-Azidopropyl)vinylsulfonamide was developed as a new bifunctional bioconjugation reagent suitable for the cross-linking of biomolecules through copper(I)-catalyzed azide-alkyne cycloaddition and thiol Michael addition reactions under biorthogonal conditions. The reagent is easily clicked to an acetylene-containing DNA or protein and then reacts with cysteine-containing peptides or proteins to form covalent cross-links. Several examples of bioconjugations of ethynyl- or octadiynyl-modified DNA with peptides, p53 protein, or alkyne-modified human carbonic anhydrase with peptides are given.

  19. A Green Approach to SNF Reprocessing: Are Common Household Reagents the Answer?

    Energy Technology Data Exchange (ETDEWEB)

    Peper, Shane M.; McNamara, Bruce K.; O' Hara, Matthew J.; Douglas, Matthew

    2008-04-03

    It has been discovered that UO2, the principal component of spent nuclear fuel (SNF), can efficiently be dissolved at room temperature using a combination of common household reagents, namely hydrogen peroxide, baking soda, and ammonia. This rather serendipitous discovery opens up the possibility, for the first time, of considering a non-acidic process for recycling U from SNF. Albeit at the early stages of development, our unconventional dissolution approach possesses many attractive features that could make it a reality in the future. With dissolution byproducts of water and oxygen, our approach poses a minimal threat to the environment. Moreover, the use of common household reagents to afford actinide oxide dissolution suggests a certain degree of economic favorability. With the use of a “closed” digestion vessel as a reaction chamber, our approach has substantial versatility with the option of using either aqueous or gaseous reactant feeds or a combination of both. Our approach distinguishes itself from all existing reprocessing technologies in two important ways. First and foremost, it is an alkaline rather than an acidic process, using mild non-corrosive chemicals under ambient conditions to effect actinide separations. Secondly, it does not dissolve the entire SNF matrix, but rather selectively solubilizes U and other light actinides for subsequent separation, resulting in potentially faster head-end dissolution and fewer downstream separation steps. From a safeguards perspective, the use of oxidizing alkaline solutions to effect actinide separations also potentially offers a degree of inherent proliferation resistance, by allowing the U to be selectively removed from the remaining dissolver solution while keeping Pu grouped with the other minor actinides and fission products. This paper will describe the design and general experimental setup of a “closed” digestion vessel for performing uranium oxide dissolutions under alkaline conditions using

  20. Detection of nerve agents using proton transfer reaction mass spectrometry with ammonia as reagent gas.

    Science.gov (United States)

    Ringer, Joachim M

    2013-01-01

    The chemical warfare agents (CWA) Sarin, Soman, Cyclosarin and Tabun were characterised by proton transfer mass spectrometry (PTRMS). It was found that PTRMS is a suitable technique to detect nerve agents highly sensitively, highly selectively and in near real-time. Methods were found to suppress molecule fragmentation which is significant under PTRMS hollow cathode ionisation conditions. In this context, the drift voltage (as one of the most important system parameters) was varied and ammonia was introduced as an additional chemical reagent gas. Auxiliary chemicals such as ammonia affect ionisation processes and are quite common in context with detectors for CWAs based on ion mobility spectrometry (IMS). With both, variation of drift voltage and ammonia as the reagent gas, fragmentation can be suppressed effectively. Suppression of fragmentation is crucial particularly concerning the implementation of an algorithm for automated agent identification in field applications. On the other hand, appearance of particular fragments might deliver additional information. Degradation and rearrangement products of nerve agents are not distinctive for the particular agent but for the chemical class they belong to. It was found that switching between ammonia doped and ordinary water ionisation chemistry can easily be performed within a few seconds. Making use of this effect it is possible to switch between fragment and molecular ion peak spectra. Thus, targeted fragmentation can be used to confirm identification based only on single peak detection. PTRMS turned out to be a promising technique for future CWA detectors. In terms of sensitivity, response time and selectivity (or confidence of identification, respectively) PTRMS performs as a bridging technique between IMS and GC-MS.

  1. Preparation of Silver-Coated Polystyrene Composite Particles

    Institute of Scientific and Technical Information of China (English)

    陈卓; 詹鹏; 章建辉; 王振林; 章维益; 闵乃本

    2003-01-01

    We report a feasible approach to the preparation of monodispersed metal-shell composite microspheres based on a combination of surface reaction and surface seeding techniques. The method was implemented for coating polystyrene (PS) spheres with silver shell having a variable thickness by controlling the amount of reagents in the reaction procedure. These composite spherical particles in dimensions of the submicrometer range may become attractive building blocks for the creation of metallo-dielectric photonic band gap materials when they are organized into crystals.

  2. Process for preparing multilayer enzyme coating on a fiber

    Science.gov (United States)

    Kim, Jungbae; Kwak, Ja Hun; Grate, Jay W.

    2009-11-03

    A process for preparing high stability, high activity biocatalytic materials is disclosed and processes for using the same. The process involves coating of a material or fiber with enzymes and enzyme aggregate providing a material or fiber with high biocatalytic activity and stability useful in heterogeneous environments. In one illustrative approach, enzyme "seeds" are covalently attached to polymer nanofibers followed by treatment with a reagent that crosslinks additional enzyme molecules to the seed enzymes forming enzyme aggregates thereby improving biocatalytic activity due to increased enzyme loading and enzyme stability. This approach creates a useful new biocatalytic immobilized enzyme system with potential applications in bioconversion, bioremediation, biosensors, and biofuel cells.

  3. Comparação de bulas de duas marcas de tiras reagentes utilizadas no exame químico de urina Comparison of product labelings of two marks of reagent strips for the chemical examination of urine

    Directory of Open Access Journals (Sweden)

    Adriana Scotti da Silva Colombeli

    2006-04-01

    Full Text Available INTRODUÇÃO: O exame de urina proporciona informações sobre patologias renais e do trato urinário, bem como algumas moléstias extra-renais. Usualmente o exame químico de urina é feito com tiras reagentes, objetivando tornar a determinação mais rápida, simples e econômica. OBJETIVOS: Comparar bulas de duas marcas de tiras amplamente utilizadas em laboratórios de urinálise (Roche Combur10 Test® UX e Bayer Multistix® 10 SG. MATERIAL E MÉTODO: Compararam-se as bulas quanto aos princípios utilizados nas determinações de pH, proteínas, glicose, cetonas, hemoglobina, bilirrubina, urobilinogênio, nitrito, densidade e leucócitos, além das informações sobre possíveis interferências. RESULTADOS: Foram verificadas diferenças nos reagentes utilizados para detecção dos parâmetros, como é o caso do urobilinogênio (a tira Multistix usa o reagente de Ehrlich, menos específico e mais propenso a interferências analíticas que o sal de diazônio derivado de metoxibenzeno, utilizado na tira Roche; para nitrito, proteína, glicose, bilirrubina e hemoglobina as diferenças foram mais sutis. DISCUSSÃO: Detectou-se diversidade de informações quanto a possíveis interferentes, o que talvez possa ser justificado parcialmente pelas diferenças nos reagentes. Também foram verificadas diferenças nas informações sobre interferências de um idioma para outro, destacando-se a omissão de algumas delas na bula em português. Observou-se grande disparidade na avaliação da intensidade da reação e sua expressão em cruzes, como, por exemplo, no parâmetro glicose, o que pode levar a erros na interpretação do laudo laboratorial. CONCLUSÃO: As observações registradas reforçam a importância de padronizações no exame parcial de urina.BACKGROUND: The urinalysis provides information about renal and urinary diseases, as well as about some extra renal diseases. The chemical examination of urine is done with reagent strips, which allows

  4. An experimental research of a dry-reagent microassay for determination of glucose based on a miniature biochemistry analyzer%基于微型生化光谱分析仪测定血糖的干试剂研究

    Institute of Scientific and Technical Information of China (English)

    王华忠; 蒲晓允; 吴杰红; 李强

    2011-01-01

    Objective To explore an effective way of preparation for dry glucose reagent and establish a dry-reagent microassay for determination of glucose based on a miniature biochemistry analyzer. Methods Add 200 μL working solution of glucose reagent to each well of a microplate,and then dry the reagent by a lyophilizer. Serum samples or standards were diluted to redissolve the dry reagent and act in an incubation of 37 ℃ for 10 minutes. The absorptance was determined on a microplate reader. Screen proper lyopretector and its concentration to produce quality dry reagent. TBHBA was used as a new chromogen to replace the phenol reagent to improve the linear range and sensitivity. 30 clinical samples were analyzed with optimized method,and the results were compared with those of automatic biochemical analyzer to evaluate the correlation of two methods. Results Quality dry reagent of glucose was produced by adding 10 g/L albumin to working solution before lyophilization. The phenol reagent was replaced by TBHBA as chromogen and the sample/reagent ratio was adjusted to 1 ∶ 200. This optimized method have the advantages of higher reaction velocity,higher sensitivity, wider linear range,and lower detection limit. There was a good correlation between the results and those of biochemical analyzer(P<O. 01). Conclusion The improved method can meet the requirements for effective measurement of glucose with dry regent,which paves the way for manufacture and application of a miniature biochemistry analyzer with a dry-reagent microassay.%目的 探索一种制备葡萄糖干试剂的方法,建立干试剂湿化学测定方法,为干试剂微型生化光谱分析仪的应用奠定基础.方法 将测定试剂工作液添加到微孔板的小孔内,每孔200 μL,用冷冻干燥的方法将试剂干燥,然后用水稀释测定样品,温浴10 min,用酶标仪进行比色测定.对冻干添加剂的种类及浓度进行了筛选,应用TBHBA替换酚试剂,增强显色灵敏度,将优

  5. Cp2TiCl/D2O/Mn, a formidable reagent for the deuteration of organic compounds.

    Science.gov (United States)

    Rosales, Antonio; Rodríguez-García, Ignacio

    2016-01-01

    Cp2TiCl/D2O/Mn is an efficient combination, sustainable and cheap reagent that mediates the D-atom transfer from D2O to different functional groups and can contribute to the synthesis of new deuterated organic compounds under friendly experimental conditions and with great economic advantages. PMID:27559410

  6. Paper-based enzyme immobilization for flow injection electrochemical biosensor integrated with reagent-loaded cartridge toward portable modular device.

    Science.gov (United States)

    Tan, Swee Ngin; Ge, Liya; Tan, Hsih Yin; Loke, Weng Keong; Gao, Jinrong; Wang, Wei

    2012-11-20

    Paper-based enzyme immobilization for a flow injection electrochemical biosensor integrated with a reagent-loaded cartridge toward a portable device was developed. A paper disk was immobilized with enzyme, then it was integrated in a flow cell as an electrochemical biosensor. A silicon tube reagent-loaded cartridge was integrated into the system, a complicated procedure was simplified as a one-click operation toward development for point-of-care applications. In this research, glucose oxidase (GOx) was employed as a model enzyme, silver ion as an inhibition reagent for GOx, and EDTA as a regeneration reagent. When GOx was inhibited by silver ions, glucose was introduced for electrochemical measurements before and after inhibited enzyme regeneration and the difference was caused by silver inhibition. The modular device has great potential for other applications, e.g., detection of enzyme activity and substrate. The platform based on double-test mode provided accurate results due to elimination of an average or control value in comparison with classical routine approaches. PMID:23116304

  7. Cp2TiCl/D2O/Mn, a formidable reagent for the deuteration of organic compounds

    Science.gov (United States)

    Rodríguez-García, Ignacio

    2016-01-01

    Summary Cp2TiCl/D2O/Mn is an efficient combination, sustainable and cheap reagent that mediates the D-atom transfer from D2O to different functional groups and can contribute to the synthesis of new deuterated organic compounds under friendly experimental conditions and with great economic advantages. PMID:27559410

  8. The HLA-DP polymorphism in Denmark investigated by local and international PLT reagents. Definition of two "new" DP antigens

    DEFF Research Database (Denmark)

    Ødum, Niels; Hartzman, R; Jakobsen, B K;

    1986-01-01

    Lymphocytes from highly selected donors were primed for 10 days and subsequently bulk-expanded in IL 2 (TCGF) containing cultures. Two well-discriminatory PLT (CDP = Copenhagen DP) reagents against each of the DPw1-w6 specificities and one against each of the two "new" specificities, CDP4s and CD...

  9. A simple yet effective chromogenic reagent for the rapid estimation of bromate and hypochlorite in drinking water.

    Science.gov (United States)

    Zhang, Jia; Yang, Xiurong

    2013-01-21

    We present a method for the rapid visible assay of bromate and hypochlorite in drinking water within 5 min. The assay utilizes a commercially common reagent and allows the determination of bromate and hypochlorite at several ppb levels with remarkably high selectivity over other ions.

  10. Microfluidics in the selection of affinity reagents for the detection of cancer: paving a way towards future diagnostics.

    Science.gov (United States)

    Hung, Lien-Yu; Wang, Chih-Hung; Fu, Chien-Yu; Gopinathan, Priya; Lee, Gwo-Bin

    2016-08-01

    Microfluidic technologies have miniaturized a variety of biomedical applications, and these chip-based systems have several significant advantages over their large-scale counterparts. Recently, this technology has been used for automating labor-intensive and time-consuming screening processes, whereby affinity reagents, including aptamers, peptides, antibodies, polysaccharides, glycoproteins, and a variety of small molecules, are used to probe for molecular biomarkers. When compared to conventional methods, the microfluidic approaches are faster, more compact, require considerably smaller quantities of samples and reagents, and can be automated. Furthermore, they allow for more precise control of reaction conditions (e.g., pH, temperature, and shearing forces) such that more efficient screening can be performed. A variety of affinity reagents for targeting cancer cells or cancer biomarkers are now available and will likely replace conventional antibodies. In this review article, the selection of affinity reagents for cancer cells or cancer biomarkers on microfluidic platforms is reviewed with the aim of highlighting the utility of such approaches in cancer diagnostics. PMID:27381813

  11. Impact of reagent infiltration time on reaction patterns and pasting properties of modified maize and wheat starches.

    Science.gov (United States)

    Hong, Jung Sun; BeMiller, James N; Huber, Kerry C

    2016-10-20

    The impact of granular and molecular reaction patterns on modified starch properties was investigated as a function of the length of time allowed for reagent to infiltrate starch granules. A fluorescent reagent [5-(4,6-dichlorotriazinyl)aminofluorescein] was dispersed in aqueous normal maize or wheat starch slurries (35%, w/v) for 0, 5, 10, 30, or 60min, after which reaction was initiated by increasing the pH to 11.5 and allowing reaction to proceed for 3h. With increasing lengths of infiltration, the reaction became increasingly homogeneous within the granule interior (matrix) and the AM:AP reactivity ratio increased (wheat starch), as assessed by confocal laser scanning microscopy (CLSM) and size-exclusion chromatography (refractive index and fluorescence detection), respectively. A longer reagent infiltration time also led to a more inhibited (i.e., cross-linked) pasting viscosity, suggesting that both granular and/or molecular reaction patterns were altered by varied reagent infiltration times to ultimately impact modified starch properties. PMID:27474633

  12. Effects of Fenton's Reagent on aquifer geochemistry and microbiology at the A/M Area, Savannah River Site

    International Nuclear Information System (INIS)

    This report details the results of an investigation of Site conditions following a successful 1997 demonstration of in-situ DNAPL destruction by injection of Fenton's Reagent (hydrogen peroxide and ferrous sulfate solution) into DNAPL-bearing zones of an aquifer

  13. Determination of water in organic solvents by flow-injection analysis with Karl Fischer reagent and a biamperometric detection system

    NARCIS (Netherlands)

    Liang, Chen; Vácha, Pavel; Linden, van der Willem E.

    1988-01-01

    A flow-injection system with a biamperometric flow-through detector provided with two platinum plate electrodes was tested for the determination of water with a two-component pyridine-free Karl Fischer reagent. The response was shown to be linear in the concentration range 0.03–0.11% water in methan

  14. Cp2TiCl/D2O/Mn, a formidable reagent for the deuteration of organic compounds

    Science.gov (United States)

    Rodríguez-García, Ignacio

    2016-01-01

    Summary Cp2TiCl/D2O/Mn is an efficient combination, sustainable and cheap reagent that mediates the D-atom transfer from D2O to different functional groups and can contribute to the synthesis of new deuterated organic compounds under friendly experimental conditions and with great economic advantages.

  15. The hydrogen sulfide donor, Lawesson's reagent, prevents alendronate-induced gastric damage in rats

    International Nuclear Information System (INIS)

    Our objective was to investigate the protective effect of Lawesson's reagent, an H2S donor, against alendronate (ALD)-induced gastric damage in rats. Rats were pretreated with saline or Lawesson's reagent (3, 9, or 27 µmol/kg, po) once daily for 4 days. After 30 min, gastric damage was induced by ALD (30 mg/kg) administration by gavage. On the last day of treatment, the animals were killed 4 h after ALD administration. Gastric lesions were measured using a computer planimetry program, and gastric corpus pieces were assayed for malondialdehyde (MDA), glutathione (GSH), proinflammatory cytokines [tumor necrosis factor (TNF)-α and interleukin (IL)-1β], and myeloperoxidase (MPO). Other groups were pretreated with glibenclamide (5 mg/kg, ip) or with glibenclamide (5 mg/kg, ip)+diazoxide (3 mg/kg, ip). After 1 h, 27 µmol/kg Lawesson's reagent was administered. After 30 min, 30 mg/kg ALD was administered. ALD caused gastric damage (63.35±9.8 mm2); increased levels of TNF-α, IL-1β, and MDA (2311±302.3 pg/mL, 901.9±106.2 pg/mL, 121.1±4.3 nmol/g, respectively); increased MPO activity (26.1±3.8 U/mg); and reduced GSH levels (180.3±21.9 µg/g). ALD also increased cystathionine-γ-lyase immunoreactivity in the gastric mucosa. Pretreatment with Lawesson's reagent (27 µmol/kg) attenuated ALD-mediated gastric damage (15.77±5.3 mm2); reduced TNF-α, IL-1β, and MDA formation (1502±150.2 pg/mL, 632.3±43.4 pg/mL, 78.4±7.6 nmol/g, respectively); lowered MPO activity (11.7±2.8 U/mg); and increased the level of GSH in the gastric tissue (397.9±40.2 µg/g). Glibenclamide alone reversed the gastric protective effect of Lawesson's reagent. However, glibenclamide plus diazoxide did not alter the effects of Lawesson's reagent. Our results suggest that Lawesson's reagent plays a protective role against ALD-induced gastric damage through mechanisms that depend at least in part on activation of ATP-sensitive potassium (KATP) channels

  16. The hydrogen sulfide donor, Lawesson's reagent, prevents alendronate-induced gastric damage in rats

    Energy Technology Data Exchange (ETDEWEB)

    Nicolau, L.A.D. [Núcleo de Pesquisa em Produtos Naturais, Departamento de Farmacologia, Universidade Federal do Piauí, Teresina, PI (Brazil); Silva, R.O.; Damasceno, S.R.B.; Carvalho, N.S.; Costa, N.R.D. [Laboratório de Fisiofarmacologia Experimental, Centro de Pesquisa em Biodiversidade e Biotecnologia, Universidade Federal do Piauí, Parnaíba, PI (Brazil); Aragão, K.S. [Laboratório de Farmacologia da Inflamação e do Câncer, Departamento de Farmacologia, Universidade Federal do Ceará, Fortaleza, CE (Brazil); Barbosa, A.L.R. [Núcleo de Pesquisa em Produtos Naturais, Departamento de Farmacologia, Universidade Federal do Piauí, Teresina, PI (Brazil); Laboratório de Fisiofarmacologia Experimental, Centro de Pesquisa em Biodiversidade e Biotecnologia, Universidade Federal do Piauí, Parnaíba, PI (Brazil); Soares, P.M.G.; Souza, M.H.L.P. [Laboratório de Farmacologia da Inflamação e do Câncer, Departamento de Farmacologia, Universidade Federal do Ceará, Fortaleza, CE (Brazil); Medeiros, J.V.R. [Núcleo de Pesquisa em Produtos Naturais, Departamento de Farmacologia, Universidade Federal do Piauí, Teresina, PI (Brazil); Laboratório de Fisiofarmacologia Experimental, Centro de Pesquisa em Biodiversidade e Biotecnologia, Universidade Federal do Piauí, Parnaíba, PI (Brazil)

    2013-08-16

    Our objective was to investigate the protective effect of Lawesson's reagent, an H{sub 2}S donor, against alendronate (ALD)-induced gastric damage in rats. Rats were pretreated with saline or Lawesson's reagent (3, 9, or 27 µmol/kg, po) once daily for 4 days. After 30 min, gastric damage was induced by ALD (30 mg/kg) administration by gavage. On the last day of treatment, the animals were killed 4 h after ALD administration. Gastric lesions were measured using a computer planimetry program, and gastric corpus pieces were assayed for malondialdehyde (MDA), glutathione (GSH), proinflammatory cytokines [tumor necrosis factor (TNF)-α and interleukin (IL)-1β], and myeloperoxidase (MPO). Other groups were pretreated with glibenclamide (5 mg/kg, ip) or with glibenclamide (5 mg/kg, ip)+diazoxide (3 mg/kg, ip). After 1 h, 27 µmol/kg Lawesson's reagent was administered. After 30 min, 30 mg/kg ALD was administered. ALD caused gastric damage (63.35±9.8 mm{sup 2}); increased levels of TNF-α, IL-1β, and MDA (2311±302.3 pg/mL, 901.9±106.2 pg/mL, 121.1±4.3 nmol/g, respectively); increased MPO activity (26.1±3.8 U/mg); and reduced GSH levels (180.3±21.9 µg/g). ALD also increased cystathionine-γ-lyase immunoreactivity in the gastric mucosa. Pretreatment with Lawesson's reagent (27 µmol/kg) attenuated ALD-mediated gastric damage (15.77±5.3 mm{sup 2}); reduced TNF-α, IL-1β, and MDA formation (1502±150.2 pg/mL, 632.3±43.4 pg/mL, 78.4±7.6 nmol/g, respectively); lowered MPO activity (11.7±2.8 U/mg); and increased the level of GSH in the gastric tissue (397.9±40.2 µg/g). Glibenclamide alone reversed the gastric protective effect of Lawesson's reagent. However, glibenclamide plus diazoxide did not alter the effects of Lawesson's reagent. Our results suggest that Lawesson's reagent plays a protective role against ALD-induced gastric damage through mechanisms that depend at least in part on activation of ATP-sensitive potassium (K

  17. A Quantitative Method for Comparing the Brightness of Antibody-dye Reagents and Estimating Antibodies Bound per Cell.

    Science.gov (United States)

    Kantor, Aaron B; Moore, Wayne A; Meehan, Stephen; Parks, David R

    2016-01-01

    We present a quantitative method for comparing the brightness of antibody-dye reagents and estimating antibodies bound per cell. The method is based on complementary binding of test and fill reagents to antibody capture microspheres. Several aliquots of antibody capture beads are stained with varying amounts of the test conjugate. The remaining binding sites on the beads are then filled with a second conjugate containing a different fluorophore. Finally, the fluorescence of the test conjugate compared to the fill conjugate is used to measure the relative brightness of the test conjugate. The fundamental assumption of the test-fill method is that if it takes X molecules of one test antibody to lower the fill signal by Y units, it will take the same X molecules of any other test antibody to give the same effect. We apply a quadratic fit to evaluate the test-fill signal relationship across different amounts of test reagent. If the fit is close to linear, we consider the test reagent to be suitable for quantitative evaluation of antibody binding. To calibrate the antibodies bound per bead, a PE conjugate with 1 PE molecule per antibody is used as a test reagent and the fluorescence scale is calibrated with Quantibrite PE beads. When the fluorescence per antibody molecule has been determined for a particular conjugate, that conjugate can be used for measurement of antibodies bound per cell. This provides comparisons of the brightness of different conjugates when conducted on an instrument whose statistical photoelectron (Spe) scales are known. © 2016 by John Wiley & Sons, Inc.

  18. STAINING SECTIONS OF WATER-MISCIBLE RESINS .2. EFFECTS OF STAINING-REAGENT LIPOPHILICITY ON THE STAINING OF GLYCOL-METHACRYLATE-EMBEDDED TISSUES

    NARCIS (Netherlands)

    HOROBIN, RW; GERRITS, PO; WRIGHT, DJ

    1992-01-01

    Glycol methacrylate (GMA) sections of animal tissues were stained with a group of twenty-seven reagents of very varied chemical characteristics. The artefactual background staining of the resin was found to be dependent on the hydrophilic/lipophilic character of the staining reagent, as estimated fr

  19. Spectrophotometric tool for the determination of the total carboxylate content in proteins; molar extinction coefficient of the enol ester from Woodward's reagent K reacted with protein carboxylates

    NARCIS (Netherlands)

    Kosters, H.A.; Jongh, H.H.J.de

    2003-01-01

    A number of relevant properties of Woodward's reagent K have been determined, such as the stability of the reactant and the optimal reaction conditions of the reactant with protein carboxylates. A Woodward's reagent K stock solution was stable at 4°C for prolonged time, whereas upon storage at 22°C,

  20. Tuning the Protein Corona of Hydrogel Nanoparticles: The Synthesis of Abiotic Protein and Peptide Affinity Reagents.

    Science.gov (United States)

    O'Brien, Jeffrey; Shea, Kenneth J

    2016-06-21

    Nanomaterials, when introduced into a complex, protein-rich environment, rapidly acquire a protein corona. The type and amount of proteins that constitute the corona depend significantly on the synthetic identity of the nanomaterial. For example, hydrogel nanoparticles (NPs) such as poly(N-isopropylacrylamide) (NIPAm) have little affinity for plasma proteins; in contrast, carboxylated poly(styrene) NPs acquire a dense protein corona. This range of protein adsorption suggests that the protein corona might be "tuned" by controlling the chemical composition of the NP. In this Account, we demonstrate that small libraries of synthetic polymer NPs incorporating a diverse pool of functional monomers can be screened for candidates with high affinity and selectivity to targeted biomacromolecules. Through directed synthetic evolution of NP compositions, one can tailor the protein corona to create synthetic organic hydrogel polymer NPs with high affinity and specificity to peptide toxins, enzymes, and other functional proteins, as well as to specific domains of large proteins. In addition, many NIPAm NPs undergo a change in morphology as a function of temperature. This transformation often correlates with a significant change in NP-biomacromolecule affinity, resulting in a temperature-dependent protein corona. This temperature dependence has been used to develop NP hydrogels with autonomous affinity switching for the protection of proteins from thermal stress and as a method of biomacromolecule purification through a selective thermally induced catch and release. In addition to temperature, changes in pH or buffer can also alter a NP protein corona composition, a property that has been exploited for protein purification. Finally, synthetic polymer nanoparticles with low nanomolar affinity for a peptide toxin were shown to capture and neutralize the toxin in the bloodstream of living mice. While the development of synthetic polymer alternatives to protein affinity reagents is

  1. Tuning the Protein Corona of Hydrogel Nanoparticles: The Synthesis of Abiotic Protein and Peptide Affinity Reagents.

    Science.gov (United States)

    O'Brien, Jeffrey; Shea, Kenneth J

    2016-06-21

    Nanomaterials, when introduced into a complex, protein-rich environment, rapidly acquire a protein corona. The type and amount of proteins that constitute the corona depend significantly on the synthetic identity of the nanomaterial. For example, hydrogel nanoparticles (NPs) such as poly(N-isopropylacrylamide) (NIPAm) have little affinity for plasma proteins; in contrast, carboxylated poly(styrene) NPs acquire a dense protein corona. This range of protein adsorption suggests that the protein corona might be "tuned" by controlling the chemical composition of the NP. In this Account, we demonstrate that small libraries of synthetic polymer NPs incorporating a diverse pool of functional monomers can be screened for candidates with high affinity and selectivity to targeted biomacromolecules. Through directed synthetic evolution of NP compositions, one can tailor the protein corona to create synthetic organic hydrogel polymer NPs with high affinity and specificity to peptide toxins, enzymes, and other functional proteins, as well as to specific domains of large proteins. In addition, many NIPAm NPs undergo a change in morphology as a function of temperature. This transformation often correlates with a significant change in NP-biomacromolecule affinity, resulting in a temperature-dependent protein corona. This temperature dependence has been used to develop NP hydrogels with autonomous affinity switching for the protection of proteins from thermal stress and as a method of biomacromolecule purification through a selective thermally induced catch and release. In addition to temperature, changes in pH or buffer can also alter a NP protein corona composition, a property that has been exploited for protein purification. Finally, synthetic polymer nanoparticles with low nanomolar affinity for a peptide toxin were shown to capture and neutralize the toxin in the bloodstream of living mice. While the development of synthetic polymer alternatives to protein affinity reagents is

  2. TECHNOLOGY FOR THE PREPARATION OF LIVESTOCK WASTEWATER FOR IRRIGATION OF AGRICULTURAL CROPS

    Directory of Open Access Journals (Sweden)

    Domashenko Y. E.

    2015-02-01

    Full Text Available In the article the authors propose various techniques for the preparation of livestock waste for agricultural use, particularly for irrigation. We have considered resource-saving environmentally safe technology for processing livestock waste pig farms based on the use of the reagent preparation phosphogypsum – residuals of phosphoric acid and fertilizers. The technology was tested and endorsed at the operating company LLC "Aksai field" of the Rostov region. Also based on this technology, we have offered the following technical solution: livestock wastewater is exposed to the vortex field with movable ferromagnetic particles, which contributes to more complete disinfecting effect. Further improvement of the technological scheme of training for livestock waste allowed to get more modern technical solution, including sewage treatment acidifying reagent is a suspension of phosphogypsum and slightly basic by oxychloride brand Aqua-Aurat. With the aim of reducing the cost and simplifying the technology of training we offered using a reagent, obtained from natural raw materials - silica-coagulant on the basis of nepheline instead of the low-base oxychloride brand Aqua-AuraTM. Aluminosilicate coagulant on the basis of nepheline may be used at high values of COD up to 2000 mg O/l and TBOD to 1500 mg O/l, which is a limitation for the use of such coagulants in the preparation of livestock wastewater pig farms. All the proposed technologies are based on the positions of resource and energy efficiency and environmental safety

  3. 2-Hydroxy-4-n-butoxy-5-bromoacetophenone thiosemicarbazone as an extractive spectrophotometric reagent for nickel

    Directory of Open Access Journals (Sweden)

    K. N. Patel

    2011-05-01

    Full Text Available 2-hydroxy-4-n-butoxy-5-bromoacetophenone thiosemicarbazone (HBBrAT is spectrophotometric reagent for nickel (II in chloroform. The metal ion reacts with 2-hydroxy-4-n-butoxy-5-bromoacetophenone thiosemicarbazone (HBBrAT forming a dark brown coloured complex in the pH range 7.0-11.0. The complex shows maximum absorption at 440 nm. Beer’s law is obeyed in the range 2.74-6.86 µg/mL. The molar absorptivity and Sandell’s sensitivity are found to be 5229 Lmol-1cm-1 and 0.0105 µgcm-2, respectively. The solid complex have been isolated and characterized on the basis of elemental analysis, UV, IR, NMR and Mass spectra. HBBrAT is found to be a selective and strong chelating agent for nickel. The results deduced from Job’s method of continuous variation, the mole ratio and the slope ratio method showed that metal: ligand ratio in the complex to be 1:2. The stability constant of the complex found to be 1.92 X 107. The free energy change for the complex formation reaction is found to be -10.158 K cal/mole at 32 0C. The complex is fairly stable for about 24 h and up to 55 oC.

  4. Influence of target concentration and background binding on in vitro selection of affinity reagents.

    Directory of Open Access Journals (Sweden)

    Jinpeng Wang

    Full Text Available Nucleic acid-based aptamers possess many useful features that make them a promising alternative to antibodies and other affinity reagents, including well-established chemical synthesis, reversible folding, thermal stability and low cost. However, the selection process typically used to generate aptamers (SELEX often requires significant resources and can fail to yield aptamers with sufficient affinity and specificity. A number of seminal theoretical models and numerical simulations have been reported in the literature offering insights into experimental factors that govern the effectiveness of the selection process. Though useful, these previous models have not considered the full spectrum of experimental factors or the potential impact of tuning these parameters at each round over the course of a multi-round selection process. We have developed an improved mathematical model to address this important question, and report that both target concentration and the degree of non-specific background binding are critical determinants of SELEX efficiency. Although smaller target concentrations should theoretically offer superior selection outcome, we show that the level of background binding dramatically affect the target concentration that will yield maximum enrichment at each round of selection. Thus, our model enables experimentalists to determine appropriate target concentrations as a means for protocol optimization. Finally, we perform a comparative analysis of two different selection methods over multiple rounds of selection, and show that methods with inherently lower background binding offer dramatic advantages in selection efficiency.

  5. Dynamic-contrast-enhanced-MRI with extravasating contrast reagent: Rat cerebral glioma blood volume determination

    Science.gov (United States)

    Li, Xin; Rooney, William D.; Várallyay, Csanád G.; Gahramanov, Seymur; Muldoon, Leslie L.; Goodman, James A.; Tagge, Ian J.; Selzer, Audrey H.; Pike, Martin M.; Neuwelt, Edward A.; Springer, Charles S.

    2010-10-01

    The accurate mapping of the tumor blood volume (TBV) fraction ( vb) is a highly desired imaging biometric goal. It is commonly thought that achieving this is difficult, if not impossible, when small molecule contrast reagents (CRs) are used for the T1-weighted (Dynamic-Contrast-Enhanced) DCE-MRI technique. This is because angiogenic malignant tumor vessels allow facile CR extravasation. Here, a three-site equilibrium water exchange model is applied to DCE-MRI data from the cerebrally-implanted rat brain U87 glioma, a tumor exhibiting rapid CR extravasation. Analyses of segments of the (and the entire) DCE data time-course with this "shutter-speed" pharmacokinetic model, which admits finite water exchange kinetics, allow TBV estimation from the first-pass segment. Pairwise parameter determinances were tested with grid searches of 2D parametric error surfaces. Tumor blood volume ( vb), as well as ve (the extracellular, extravascular space volume fraction), and Ktrans (a CR extravasation rate measure) parametric maps are presented. The role of the Patlak Plot in DCE-MRI is also considered.

  6. Total organic carbon removal from a chemical lab’s wastewater using Fenton’s reagent

    Directory of Open Access Journals (Sweden)

    Oscar Mauricio Martínez Ávila

    2012-10-01

    Full Text Available Treating industrial wastewater represents a serious problem nowadays; it requires a strong understanding of the particular systems and (in most of cases ad hoc solutions. This work describes the use of Fenton’s reagent (reaction between H2O2 and Fe(II for removing total organic carbon (TOC from a particular chemical laboratory’s lab-scale batch reactor wastewater. Some operating variables (hydrogen peroxide and ferrous ion concentration, temperature and pH were evaluated regarding final TOC removal. An economic optimisation was made by means of a second order polynomial model representing these variables’ behaviour regarding TOC removal (0.94 R2. The highest experimentally reached TOC removal was 88.8% at 50 mg/L [Fe(II]0, 50 mM [H2O2]0 , pH=2.8 at 80oC, while 53.9% was obtained in optimised conditions, i.e. 36 mg/L [Fe(II]0 , 45.5 mM [H2O2]0 , pH=2.6 at 20°C. It was found that the Fenton process could achieve 41% removal, even in adverse conditions (pH close to 6. It was noted from the analysis that both H2O2 concentration and temperature had a powerful effect on organic matter degradation efficiency, as well as on total treatment cost.

  7. Pyrite nanoparticles as a Fenton-like reagent for in situ remediation of organic pollutants

    Directory of Open Access Journals (Sweden)

    Carolina Gil-Lozano

    2014-06-01

    Full Text Available The Fenton reaction is the most widely used advanced oxidation process (AOP for wastewater treatment. This study reports on the use of pyrite nanoparticles and microparticles as Fenton reagents for the oxidative degradation of copper phthalocyanine (CuPc as a representative contaminant. Upon oxidative dissolution in water, pyrite (FeS2 particles can generate H2O2 at their surface while simultaneously promoting recycling of Fe3+ into Fe2+ and vice versa. Pyrite nanoparticles were synthesized by the hot injection method. The use of a high concentration of precursors gave individual nanoparticles (diameter: 20 nm with broader crystallinity at the outer interfaces, providing a greater number of surface defects, which is advantageous for generating H2O2. Batch reactions were run to monitor the kinetics of CuPc degradation in real time and the amount of H2O2. A markedly greater degradation of CuPc was achieved with nanoparticles as compared to microparticles: at low loadings (0.08 mg/L and 20 h reaction time, the former enabled 60% CuPc removal, whereas the latter enabled only 7% removal. These results confirm that the use of low concentrations of synthetic nanoparticles can be a cost effective alternative to conventional Fenton procedures for use in wastewater treatment, avoiding the potential risks caused by the release of heavy metals upon dissolution of natural pyrites.

  8. Spectrophotometric Determination of Doripenem, Ertapenem in Bulk and Injection Formulations by F-C Reagent

    Directory of Open Access Journals (Sweden)

    K. Raghu Babu

    2013-10-01

    Full Text Available Two simple and cost effective spectrophotometric methods were described for the determination of Doripenem and Ertapenem in pure form and in pharmaceutical formulations. The method is based on the formation of blue colored chromogen when the drug reacts with Folin-Ciocalteu (F-C reagent in alkaline medium. The colored species has an absorption maximum at 725 nm for Doripenem (Method A; 848 nm for Ertapenem (Method B and obeys beer’s law in the concentration range 0.02-0.1 mg/mL for both Doripenem and Ertapenem. The apparent molar absorptivities were 1.26×10-5, 7.86×10-6 and sandell’s sensitivity was 6×10-4 respectively for Doripenem and Ertapenem. The slopes were 0.3371 ± 0.01245, 0.2611 ± 0.004327 and intercept of the equation of the regression line are 0.02857 ± 0.01885, -0.008095 ± 0.006550 for Doripenem and Ertapenem respectively. The optimum experimental parameters for the reaction have been studied and the validity of the described procedure was assessed. Statistical analysis of the results has been carried out revealing high accuracy and good precision. The proposed method was successfully applied for the determination of Doripenem and Ertapenem in pharmaceutical formulations.

  9. A Versatile Simple Capture Assay for Assessing the Structural Integrity of MHC Multimer Reagents.

    Directory of Open Access Journals (Sweden)

    Brendan K Reed

    Full Text Available Antigen-specific T cell responses can be visualized using MHC:peptide multimers. In cases where robust T cell controls are not readily available to assess the integrity of multimer reagents prior to analyzing limited sample, the ability to assess the structural integrity of MHC multimers before their use in critical experiments would be useful. We present a method to probe the structural integrity of MHC multimers using antibodies specific for conformational determinants. Beads coated with anti-mouse Ig are incubated with conformation-specific mouse monoclonal antibody and then with fluorescently tagged MHC multimer. The ability of the bead to capture the labeled multimer can be measured semi-quantitatively by flow cytometry. In this manner, the correct folding of MHC multimers can be visualized and batches of multimer can be compared for quality control. Because there are multiple conformational epitopes formed by various molecular interactions among heavy chain, peptide, and β2M, this capture assay can assess the fidelity of each aspect of multimer structure, depending on the availability of antibodies. The described approach could be particularly useful for studies using irreplaceable samples, including patient samples collected in clinical trials.

  10. Treatment of textile effluent by chemical (Fenton's Reagent) and biological (sequencing batch reactor) oxidation

    International Nuclear Information System (INIS)

    The removal of organic compounds and colour from a synthetic effluent simulating a cotton dyeing wastewater was evaluated by using a combined process of Fenton's Reagent oxidation and biological degradation in a sequencing batch reactor (SBR). The experimental design methodology was first applied to the chemical oxidation process in order to determine the values of temperature, ferrous ion concentration and hydrogen peroxide concentration that maximize dissolved organic carbon (DOC) and colour removals and increase the effluent's biodegradability. Additional studies on the biological oxidation (SBR) of the raw and previously submitted to Fenton's oxidation effluent had been performed during 15 cycles (i.e., up to steady-state conditions), each one with the duration of 11.5 h; Fenton's oxidation was performed either in conditions that maximize the colour removal or the increase in the biodegradability. The obtained results allowed concluding that the combination of the two treatment processes provides much better removals of DOC, BOD5 and colour than the biological or chemical treatment alone. Moreover, the removal of organic matter in the integrated process is particularly effective when Fenton's pre-oxidation is carried out under conditions that promote the maximum increase in wastewater biodegradability.

  11. Efficient gene silencing by delivery of locked nucleic acid antisense oligonucleotides, unassisted by transfection reagents.

    Science.gov (United States)

    Stein, C A; Hansen, J Bo; Lai, Johnathan; Wu, SiJian; Voskresenskiy, Anatoliy; Høg, Anja; Worm, Jesper; Hedtjärn, Maj; Souleimanian, Naira; Miller, Paul; Soifer, Harris S; Castanotto, Daniella; Benimetskaya, Luba; Ørum, Henrik; Koch, Troels

    2010-01-01

    For the past 15-20 years, the intracellular delivery and silencing activity of oligodeoxynucleotides have been essentially completely dependent on the use of a delivery technology (e.g. lipofection). We have developed a method (called 'gymnosis') that does not require the use of any transfection reagent or any additives to serum whatsoever, but rather takes advantage of the normal growth properties of cells in tissue culture in order to promote productive oligonucleotide uptake. This robust method permits the sequence-specific silencing of multiple targets in a large number of cell types in tissue culture, both at the protein and mRNA level, at concentrations in the low micromolar range. Optimum results were obtained with locked nucleic acid (LNA) phosphorothioate gap-mers. By appropriate manipulation of oligonucleotide dosing, this silencing can be continuously maintained with little or no toxicity for >240 days. High levels of oligonucleotide in the cell nucleus are not a requirement for gene silencing, contrary to long accepted dogma. In addition, gymnotic delivery can efficiently deliver oligonucleotides to suspension cells that are known to be very difficult to transfect. Finally, the pattern of gene silencing of in vitro gymnotically delivered oligonucleotides correlates particularly well with in vivo silencing. The establishment of this link is of particular significance to those in the academic research and drug discovery and development communities.

  12. The intracellular trafficking mechanism of Lipofectamine-based transfection reagents and its implication for gene delivery.

    Science.gov (United States)

    Cardarelli, Francesco; Digiacomo, Luca; Marchini, Cristina; Amici, Augusto; Salomone, Fabrizio; Fiume, Giuseppe; Rossetta, Alessandro; Gratton, Enrico; Pozzi, Daniela; Caracciolo, Giulio

    2016-01-01

    Lipofectamine reagents are widely accepted as "gold-standard" for the safe delivery of exogenous DNA or RNA into cells. Despite this, a satisfactory mechanism-based explanation of their superior efficacy has remained mostly elusive thus far. Here we apply a straightforward combination of live cell imaging, single-particle tracking microscopy, and quantitative transfection-efficiency assays on live cells to unveil the intracellular trafficking mechanism of Lipofectamine/DNA complexes. We find that Lipofectamine, contrary to alternative formulations, is able to efficiently avoid active intracellular transport along microtubules, and the subsequent entrapment and degradation of the payload within acidic/digestive lysosomal compartments. This result is achieved by random Brownian motion of Lipofectamine-containing vesicles within the cytoplasm. We demonstrate here that Brownian diffusion is an efficient route for Lipofectamine/DNA complexes to avoid metabolic degradation, thus leading to optimal transfection. By contrast, active transport along microtubules results in DNA degradation and subsequent poor transfection. Intracellular trafficking, endosomal escape and lysosomal degradation appear therefore as highly interdependent phenomena, in such a way that they should be viewed as a single barrier on the route for efficient transfection. As a matter of fact, they should be evaluated in their entirety for the development of optimized non-viral gene delivery vectors. PMID:27165510

  13. Diagnosis of spontaneous bacterial peritonitis: An update on leucocyte esterase reagent strips

    Institute of Scientific and Technical Information of China (English)

    Anastasios Koulaouzidis

    2011-01-01

    Ascites remain the commonest complication of decom-pensated cirrhosis. Spontaneous bacterial peritonitis (SBP) is defined as the infection of ascitic fluid (AF) in the ab-sence of a contiguous source of infection and/or an intra-abdominal inflammatory focus. An AF polymorphonuclear (PMN) leucocyte count ≥ 250/mm3 -irrespective of the AF culture result- is universally accepted nowadays as the best surrogate marker for diagnosing SBP. Frequently the results of the manual or automated PMN count do not reach the hands of the responsible medical personnel in a timely manner. However, this is a crucial step in SBP man-agement. Since 2000, 26 studies (most of them published as full papers) have checked the validity of using leukocyte esterase reagent strips (LERS) in SBP diagnosis. LERS appear to have low sensitivity for SBP, some LERS types more than others. On the other hand, though, LERS have consistently given a high negative predictive value (> 95% in the majority of the studies) and this supports the use of LERS as a preliminary screening tool for SBP diagnosis. Finally, an AF-tailored dipstick has been developed. Within the proper setting, it is set to become the mainstream pro-cess for handling AF samples.

  14. Researching the technology of tar removal from coke-chemical plants’ wastewater by reagent flotation method

    Directory of Open Access Journals (Sweden)

    Anna V. Ivanchenko

    2015-03-01

    Full Text Available The study aims to identify process patterns of tars and oils removal from phenolic wastewater by reagent flotation with bringing those components’ content to acceptable concentrations. For the first time established is the effect of Al2(SO43, AlCl3, FeSO4, Fe2(SO43, Al2(OH5Cl and FeCl3 doses onto residual tar content in phenolic wastewater. Results obtained give the possibility to prevent air pollution resulting from the toxic substances emission at the wet quenching with water containing excessive oils and to increase the quality of wastewater biological treatment. It is shown experimentally that the most efficient are Fe2(SO43, FeCl3 and Al2(OH5Cl at optimum concentrations of 50, 30 and 30 mg/dm3 respectively. The Al2(OH5Cl can be recommended for implementation at industry on existing coking plants and municipal wastewater treatment plants to improve the environmental air and water resources condition in Ukraine.

  15. Cross-reactivity of amphetamine analogues with Roche Abuscreen radioimmunoassay reagents

    Energy Technology Data Exchange (ETDEWEB)

    Cody, J.T. (Air Force Drug Testing Laboratory, Brooks AFB, TX (USA))

    1990-01-01

    Cross-reactivity of amphetamine analogues with the Abuscreen amphetamine radioimmunoassay reagents was determined for both the standard and high specificity antibody systems. Compounds tested included 2-methoxyamphetamine, 4-hydroxymethamphetamine, 2,5-dimethoxyamphetamine (DMA), 4-bromo-2,5-dimethoxyamphetamine (DOB), 4-bromo-2,5-dimethoxy-beta-phenethylamine (BDMPEA), 3,4,5-trimethoxyamphetamine (TMA), 3,4-methylenedioxyamphetamine (MDA), N,N-dimethyl-3,4-methylenedioxyamphetamine and N-hydroxy-3,4-methylenedioxyamphetamine (N-OH MDA), 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyethylamphetamine (MDEA), 2,5-dimethoxy-4-ethylamphetamine, 2,5-dimethoxy-4-methylamphetamine (DOM), and 3,4,5-trimethoxyphenethylamine (mescaline). Blank negative reference material was spiked with 1,000 to 100,000 ng/mL of the amphetamine analogue and used as sample in the assays. MDA was the only analogue that showed cross reactivity equal to or greater than that of amphetamine. None of the other analogue compounds demonstrated a positive result at even the highest concentration; however several showed depressed counts at various concentration levels.

  16. Field-Portable Immunoassay Instruments and Reagents to Measure Chelators and Mobile Forms of Uranium

    Energy Technology Data Exchange (ETDEWEB)

    Blake, Diane A.

    2006-01-23

    Progress Report Date: 01/23/06 (report delayed due to Hurricane Katrina) Report of results to date: The goals of this 3-year project are to: (1) update and successfully deploy our present immunosensors at DOE sites; (2) devise immunosensor-based assays for Pb(II), Hg(II), chelators, and/or Cr(III) in surface and groundwater; and (3) develop new technologies in antibody engineering that will enhance this immunosensor program. Note: Work on this project was temporarily disrupted when Hurricane Katrina shut down the University on August 29, 2005. While most of the reagents stored in our refrigerators and freezers were destroyed, all of our hybridoma cell lines were saved because they had been stored in liquid nitrogen. We set up new tissue culture reactors with the hybridomas that synthesize the anti-uranium antibodies, and are purifying new monoclonal antibodies from these culture supernatants. Both the in-line and the field-portable sensor were rescued from our labs in New Orleans in early October, and we continued experiments with these sensors in the temporary laboratory we set up in Hammond, LA at Southeastern Louisiana University.

  17. [Performance Assessment of a Newly Developed Rapid Diagnostic Reagent for Human Immunodeficiency Virus].

    Science.gov (United States)

    Nakagiri, Itsuhiro; Wada, Hideho; Tokunaga, Hirotoshi; Fukuda, Hirofumi; Tasaka, Taizo; Sugihara, Takashi

    2015-11-01

    Extremely early diagnosis of human immunodeficiency virus (HIV) infection has been considered highly important for its treatment. We conducted a performance assessment of a newly developed rapid diagnostic reagent for HIV by using a fourth-generation immunochromatographic assay (Alere HIV Combo). We used whole-blood, plasma, and serum samples obtained from 250 Japanese adults who visited the Kawasaki Medical School Hospital and underwent HIV screening tests. We also used 12 types of commercial HIV-1 sero- conversion panels and World Health Organization standard antigens. This method, which has a detection sensitivity of 100% and a specificity of 99.3%, was as accurate as the chemiluminescent immunoassay (CLIA) method. In a sensitivity test using seroconversion panels in the early phase of infection, the mean duration until positive conversion was 19.3 days. With this method having a high detection sensitivity for HIV-1p24 antigen, the results from whole-blood samples were the same as those from plasma and serum samples. Therefore, it can be considered as a useful rapid measurement method for general practice. PMID:26821522

  18. Application of NMR Methods to Identify Detection Reagents for Use in the Development of Robust Nanosensors

    Energy Technology Data Exchange (ETDEWEB)

    Cosman, M; Krishnan, V V; Balhorn, R

    2004-04-29

    Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful technique for studying bi-molecular interactions at the atomic scale. Our NMR lab is involved in the identification of small molecules, or ligands that bind to target protein receptors, such as tetanus (TeNT) and botulinum (BoNT) neurotoxins, anthrax proteins and HLA-DR10 receptors on non-Hodgkin's lymphoma cancer cells. Once low affinity binders are identified, they can be linked together to produce multidentate synthetic high affinity ligands (SHALs) that have very high specificity for their target protein receptors. An important nanotechnology application for SHALs is their use in the development of robust chemical sensors or biochips for the detection of pathogen proteins in environmental samples or body fluids. Here, we describe a recently developed NMR competition assay based on transferred nuclear Overhauser effect spectroscopy (trNOESY) that enables the identification of sets of ligands that bind to the same site, or a different site, on the surface of TeNT fragment C (TetC) than a known ''marker'' ligand, doxorubicin. Using this assay, we can identify the optimal pairs of ligands to be linked together for creating detection reagents, as well as estimate the relative binding constants for ligands competing for the same site.

  19. Fluorimetric determination of nitrogen oxides in the air by a novel red-region fluorescent reagent

    International Nuclear Information System (INIS)

    A sensitive fluorimetric method for the determination of nitrogen oxides (NOx: NO+NO2) in air is described. Nitrogen dioxide (nitrogen monoxide was previously converted to nitrogen dioxide in oxide tubes) was aspirated through a fritted glass bubble at a flow rate of 500 ml min-1 for 120 min and fixed as nitrite, using 0.1 N NaOH as a trapping solution with the empirical absorption efficiency 0.74 and the stoichiometric factor 0.5. The method is based on the fluorescence quenching of a red-region fluorescent reagent, tetra-substituted amino aluminum phthalocyanine (TAAlPc), after being diazotized by nitrite. Under optimal conditions the linear range of the calibration curve for nitrite is 1-40 ng ml-1 (NO2 0.24-9.6 ppb, v/v). The detection limit is 0.34 ng ml-1 for nitrite (NO2 0.08 ppb, v/v) and the relative standard deviation for six replicate measurements of 15 ng ml-1 nitrite is 3.2%. The method has been applied to the determination of nitrogen oxides in the air with satisfactory results. Typical gaseous co-pollutants such as SO2, H2S and HCHO did not interference the determination

  20. Application of Neesler reagent in the ammonium quantification used in the fermentations of biotechnology products

    Directory of Open Access Journals (Sweden)

    Dinorah Torres-Idavoy

    2015-08-01

    Full Text Available The ammonium salts are used in fermentations to supplement the deficient amounts of nitrogen and stabilize the pH of the culture medium. The excess ammonium ion exerts a detrimental effect on the fermentation process inhibiting microbial growth. An analytical method based on Neesler reagent was developed for monitoring and controlling the concentration of ammonium during the fermentation process. The test was standardized, by means of the selection of measuring equipment, and the reaction time as well as comparing standards of ammonium salts. The method was characterized with the evaluation of the next parameters: Specificity, Linearity and Range, Quantification Limit, Accuracy and Precision. The method proved to be specific. Two linear curves were defined in the ranges of concentrations of ammonium chloride salt (2-20 μg/ml and ammonium sulfate salt (5-30 μg/ml. The limits of quantification were the lowest points of each one. The method proved to be accurate and precise. This assay was applied to samples of the yeast culture and bacteria of the genus Saccharomyces and E. coli respectively. A novel method in micro plate for quantification and analytical control of ammonia was developed. This method is used to control this fundamental chemical component in the fermentations, to optimize the culture medium. Thus, an appropriate expression of recombinant proteins and proper vaccine candidates for clinical use are achieved

  1. Solvent extraction of scandium from lateritic nickel- cobalt ores using different organic reagents

    Directory of Open Access Journals (Sweden)

    Ferizoğlu Ece

    2016-01-01

    Full Text Available Scandium is the most important and strategic metal that can be recovered as a by-product from lateritic nickel-cobalt ores. In this research, different extractants were investigated in order to extract scandium from a sulfate medium by a using a solvent extraction method. Generally, the organic extractants are classified as acidic, neutral and basic organophosphorus compounds. However, in solvent extraction of scandium, the acidic and neutral organophosphorus compounds are preferred due to their higher extraction efficiencies. Thus, the aim of the present study was to compare the scandium extraction efficiencies of some acidic and neutral organic reagents. For this reason, Ionquest 290 (Bis(2,4,4-trimethylpenthyl phosphonic acid, DEHPA (Di(2-ethylhexyl phosphoric acid, Cyanex 272 ((Bis(2,4,4-trimethylpentyl phosphinic acid which are acidic organophosphorus compounds, and Cyanex 923 (Trialkylphosphine oxide, which is a neutral organophosphorus compound, were used. The extraction capacities of these organics were studied with respect to the extractant concentration at same pH and phase ratio. As a result of the study, DEHPA was found to have higher scandium extraction efficiency with lower iron extraction at pH = 0.55 at a phase ratio of 10:1 = A:O.

  2. Advanced Treatment of Pesticide-Containing Wastewater Using Fenton Reagent Enhanced by Microwave Electrodeless Ultraviolet

    Directory of Open Access Journals (Sweden)

    Gong Cheng

    2015-01-01

    Full Text Available The photo-Fenton reaction is a promising method to treat organic contaminants in water. In this paper, a Fenton reagent enhanced by microwave electrodeless ultraviolet (MWEUV/Fenton method was proposed for advanced treatment of nonbiodegradable organic substance in pesticide-containing biotreated wastewater. MWEUV lamp was found to be more effective for chemical oxygen demand (COD removal than commercial mercury lamps in the Fenton process. The pseudo-first order kinetic model can well describe COD removal from pesticide-containing wastewater by MWEUV/Fenton, and the apparent rate constant (k was 0.0125 min−1. The optimal conditions for MWEUV/Fenton process were determined as initial pH of 5, Fe2+ dosage of 0.8 mmol/L, and H2O2 dosage of 100 mmol/L. Under the optimal conditions, the reaction exhibited high mineralization degrees of organics, where COD and dissolved organic carbon (DOC concentration decreased from 183.2 mg/L to 36.9 mg/L and 43.5 mg/L to 27.8 mg/L, respectively. Three main pesticides in the wastewater, as Dimethoate, Triazophos, and Malathion, were completely removed by the MWEUV/Fenton process within 120 min. The high degree of pesticides decomposition and mineralization was proved by the detected inorganic anions.

  3. Interfacial reaction using particle-immobilized reagents in a fluidized reactor. Determination of glycerol in biodiesel.

    Science.gov (United States)

    Shishov, Andrey; Zabrodin, Andrey; Moskvin, Leonid; Andruch, Vasil; Bulatov, Andrey

    2016-03-31

    A novel fluidized beads strategy for utilization of particle-immobilized reagents in flow analysis was developed in this study. The performance of the suggested strategy was demonstrated by the determination of glycerol in biodiesel. This analytical task was used as a proof-of-concept example. The method is based on on-line extraction of glycerol from biodiesel into aqueous stationary phase of extraction-chromatographic column, followed by elution and spectrophotometric determination in the form of copper glycerate formed in a fluidized reactor of stepwise injection system. The floating of cation exchange resin Dowex(®) 50WX4, saturated with Cu(II) ions in liquid phase, was accomplished by air-bubbling. The linear range was from 100 to 1000 mg kg(-1), and the limit of detection, calculated as 3s of a blank test (n = 5), was found to be 30 mg kg(-1). The method was successfully applied to the analysis of biodiesel and biodiesel-blend (B 20) samples.

  4. Local production and evaluation of primary reagents for immunoradiometric assay of AFP

    International Nuclear Information System (INIS)

    A rapid multisite immunoradiometric assay for measurement of human α-fetoprotein (AFP) that uses a high affinity monoclonal and polyclonal antibodies directed against distinct and separate determinants on the protein was developed and designated as coated-tubes IRMA (CT-IRMA). AFP standards or serum samples were added into the polystyrene tubes coated with goat IgG antibody against human AFP. After 1 hour incubation, the tubes were washed and a radioiodinated mouse monoclonal antibody was added and then incubated overnight at room temperature. The sensitivity of the CT-IRMA was found to he 0.26 ng/ml. The recovery of AFP mixed with human serum was 98.1 -111.1 %. The within-assay, and between-assay coefficients of variation were 1.49 - 3.11 % and 4.89 - 7.44 %, respectively. The assay correlated well with a commercial method (CIS bio international, France) ( r = 0.9741, n = 83, OAEP kit 0.8748 CIS kit - 2.1561). The mean concentration of AFP in normal serum was 5 ng/ml. This developed kit reagents are being assessed clinically in multicenter study at National Cancer Institute, Chulalongkorn Hospital and Pramongkutklao Hospital to find the real clinical application in various groups of patients which include early detection monitoring therapy, follow up of hepatocellular carcinoma, early identification and monitoring of AFP- producing tumors in high-risk populations. (Author)

  5. Mono-dispersed cross-linked polystyrene micro-spheres prepared by seed swelling polymerization method

    Institute of Scientific and Technical Information of China (English)

    Dongsha WANG; Yanjun LIU

    2008-01-01

    A two-step swelling procedure was adopted to synthesize mono-dispersed and highly cross-linked poly (St-divinylbenzene) particles with PSt micro-spheres (1.80 μmin diameter). The PSt micro-spheres were prepared by a dispersion polymerization method and used as seeds. The effects of monomer concentration, ratio of ethanol to water, swelling reagents, crosslinking reagents, swelling temper-ature and agitation speed on particle size were investigated in detail. The morphologies and size distributions of these micro-spheres were examined by SEM and particle size analysis (PSA). The Tg of the micro-spheres was measured by DSC. The results indicate that the particles (6.20 μm in diameter) exhibit excellent mono dispersed property and high crosslinking degree when the concentration of the swelling reagent was 25%, the concentration of the cross-linking reagents was 23%, the swelling temperature was 30℃ and the stirring speed was 150 r/min.

  6. Azulenesulfonium Salts: Accessible, Stable, and Versatile Reagents for Cross‐Coupling

    Science.gov (United States)

    Jin, Yu; Turton, Michael D.; Kociok‐Köhn, Gabriele

    2016-01-01

    Abstract Azulenesulfonium salts may be readily prepared from the corresponding azulenes by an SEAr reaction. These azulene sulfonium salts are bench‐stable species that may be employed as pseudohalides for cross‐coupling. Specifically, their application in Suzuki–Miyaura reactions has been demonstrated with a diverse selection of coupling partners. These azulenesulfonium salts possess significant advantages in comparison with the corresponding azulenyl halides, which are known to be unstable and difficult to prepare in pure form. PMID:26806850

  7. Tratamento de água subterrânea contaminada com compostos organoclorados usando ferro elementar e o reagente de Fenton Treatment of groundwater contaminated with chlorinated compounds using elemental iron and Fenton's reagent

    Directory of Open Access Journals (Sweden)

    Tatiana Langbeck de Arruda

    2007-01-01

    Full Text Available The remediation of groundwater containing organochlorine compounds was evaluated using a reductive system with zero-valent iron, and the reductive process coupled with Fenton's reagent. The concentration of the individual target compounds reached up to 400 mg L-1 in the sample. Marked reductions in the chlorinated compounds were observed in the reductive process. The degradation followed pseudo-first-order kinetics in terms of the contaminant and was dependent on the sample contact time with the solid reducing agent. An oxidative test with Fenton's reagent, followed by the reductive assay, showed that tetrachloroethylene was further reduced up to three times the initial concentration. The destruction of chloroform, however, demands an additional treatment.

  8. Uso do violeta de alizarina N (AVN como reagente espectrofotométrico na determinação de alumínio Use of the alizarine violet N (AVN as a spectrophotometric reagent for aluminium determination

    Directory of Open Access Journals (Sweden)

    Alailson Falcão Dantas

    2000-04-01

    Full Text Available The present work proposes the application of the 4-Hidroxy-3-(2-hydroxynaphtylazo-benzenesulphonic acid (C.I. 15670, Alizarine Violet N (AVN, as a reagent for direct aluminium determination using molecular absorption spectrophotometry in the presence of tensoatives. Al(III cation reacts with AVN in pH 9.4, forming a red complex, stable for at least 24 hours, with absorption minimum at 607nm and, against a reagent blank, (epsiloncomplex - epsilonreagent = -2.71x10(4 L.mol-1.cm-1. The reaction occurs in the presence of a Triton-X100 and CTAB tensoatives mixture, in the presence of EDTA. Al(III determination is possible in the linear range of 50 up to 400ng.mL-1, with a detection limit of 41 ng.mL-1.

  9. Avaliação do desempenho dos reagentes do tempo de tromboplastina parcial ativada utilizados para detectar o anticoagulante lúpico Assessment of the performance of reagents of activated partial thromboplastin time used to detect the lupus anticoagulant

    Directory of Open Access Journals (Sweden)

    Fernanda Chiuso

    2005-06-01

    Full Text Available INTRODUÇÃO: O anticoagulante lúpico é uma imunoglobulina pertencente à família dos anticorpos antifosfolípides. A sua ação in vitro é interferir nos testes de coagulação dependentes de fosfolípides. O tempo de tromboplastina parcial ativada (TTPA é um teste utilizado como screening na pesquisa do anticoagulante lúpico. Os reagentes utilizados neste teste apresentam grandes variações quanto à sensibilidade. OBJETIVO: Avaliar o desempenho dos reagentes do TTPA e detectar a presença do anticoagulante lúpico através de diferentes testes da coagulação. MATERIAL E MÉTODO: A pesquisa do anticoagulante lúpico foi realizada em 50 amostras plasmáticas de pacientes do sexo feminino através dos testes do TTPA, do tempo de coagulação do caulim (TCC, do tempo de tromboplastina parcial ativada diluída (TTPAd e do tempo do veneno da víbora de Russel diluído (TVVRd. Três cefalinas comerciais foram avaliadas pelos testes do TTPA e do TTPAd. Na comparação entre os reagentes estudados foi aplicado o cálculo do intervalo de confiança (95%. RESULTADOS: Os três reagentes avaliados apresentaram boa concordância e os métodos utilizados responderam bem à pesquisa do anticoagulante lúpico. DISCUSSÃO E CONCLUSÃO: As três cefalinas comerciais avaliadas podem ser utilizadas na rotina laboratorial para a pesquisa do anticoagulante lúpico.INTRODUCTION: The lupus anticoagulant is an immunoglobin which belongs to the antiphospholid antibodies family. Its in vitro function is to interfere with coagulation tests that are dependent on phospholipids. The activated partial thromboplastin time (APTT is a test used as screening on lupus anticoagulant research. Reagents used in this test demonstrate wide sensitivity ranges. OBJECTIVE: To assess the performance of APTT reagents and detect the presence of lupus anticoagulant through various coagulation tests. MATERIAL AND METHOD: The lupus anticoagulant research was performed in plasma from 50

  10. Simple method for preparation of fluor/hapten-labeled dUTP.

    Science.gov (United States)

    Nimmakayalu, M; Henegariu, O; Ward, D C; Bray-Ward, P

    2000-03-01

    Many projects, such as multiplex-fluorescence in situ hybridization (M-FISH) karyotyping, require the use of relatively large amounts of multiple fluor- or hapten-labeled nucleotides for the preparation of DNA probes. Such a requirement makes these experimental approaches prohibitively expensive for many researchers. The cost of such nucleotides can be reduced approximately 99% by purchasing the chemical precursors, fluor or hapten succinimidyl esters and 5-(3-aminoallyl)-2'-deoxyuridine 5' triphosphate (AA-dUTP), and performing the simple coupling/purification described here. It is possible to finish four to ten different fluor/hapten dUTP preparations of 2.5 microM scale within a 24 h period. The reagent cost for each preparation ranges from $33-$237 per microM, depending on the fluor/hapten. This laboratory uses such nucleotide preparations to prepare FISH probes by nick translation or PCR amplification.

  11. HEMAGGLUTINATION TEST FOR THE DIAGNOSIS OF HUMAN NEUROCYSTICERCOSIS: DEVELOPMENT OF A STABLE REAGENT USING HOMOLOGOUS AND HETEROLOGOUS ANTIGENS

    Directory of Open Access Journals (Sweden)

    FERREIRA Andréia P.

    1997-01-01

    Full Text Available A hemagglutination (HA test was standardized using formalin- and tannin-treated gander red blood cells sensitized with a total salt extract of C. cellulosae (HA-Cc and an antigenic extract of Cysticercus longicollis (HA-Cl vesicular fluid. A total of 61 cerebrospinal fluid (CSF samples were assayed, 41 from patients with neurocysticercosis and 20 from a control group, which were, respectively, reactive and non-reactive to ELISA using C. cellulosae. The CSF samples from the control group did not react and 35 (85.4% and 34 (82.9% CSF samples from patients were reactive to the HA-Cc and HA-Cl tests, respectively. The reagents ready for use were stable up to 6 months when stored at 4°C in 50% glycerol. The present results confirm that the reagent using Cysticercus longicollis stabilized with glycerol can be used as an alternative in the immunological diagnosis of neurocysticercosis

  12. The reagent vibrational excitation effect on the stereodynamics of the reaction O(1D)+ HBr → OH + Br

    Science.gov (United States)

    Zhang, Ying-Ying; Shi, Ying; Xie, Ting-Xian; Jin, Ming-Xing; Hu, Zhan

    2013-08-01

    Calculations on the dynamics of the reaction O(1D) + HBr → OH + Br are performed on the ab initio potential energy surfaces (PESs) of the ground state given by Peterson [Peterson K A J. Chem. Phys. 113 4598 (2000)] using the quasi-classical trajectory (QCT) method. The product distribution of the dihedral angle, P(varphir), and that of the angle between k and j', P (θr), are presented in three dimensions. Moreover, we also investigate the reagent vibrational excitation effects on the two polarization-dependent generalized differential cross sections (PDDCS), PDDCS00 and PDDCS20, in the center-of-mass frame. The results indicate that the vector properties are sensitive to the reagent vibrational quantum number.

  13. The reagent vibrational excitation effect on the stereodynamics of the reaction O(1D) + HBr → OH + Br

    Institute of Scientific and Technical Information of China (English)

    Zhang Ying-Ying; Shi Ying; Xie Ting-Xian; Jin Ming-Xing; Hu Zhan

    2013-01-01

    Calculations on the dynamics of the reaction O (1D) + HBr → OH + Br are performed on the ab initio potential energy surfaces (PESs) of the ground state given by Peterson [Peterson K A J.Chem.Phys.113 4598 (2000)] using the quasiclassical trajectory (QCT) method.The product distribution of the dihedral angle,P (φr),and that of the angle between κ and j',P (θr),are presented in three dimensions.Moreover,we also investigate the reagent vibrational excitation effects on the two polarization-dependent generalized differential cross sections (PDDCS),PDDCS00 and PDDCS20,in the center-of-mass frame.The results indicate that the vector properties are sensitive to the reagent vibrational quantum number.

  14. Preparation of PAA/AM/MMT Hybrid by Intercalation Polymerization

    Institute of Scientific and Technical Information of China (English)

    WANG YunPu; HAO JinQing; XIONG YuBin; CHEN NaLi; ZHA RuiTao

    2001-01-01

    @@ Over the last few years, Montmorillonite (MMT) was widely used as a special inorganic material for preparing Polymer/MMT nanocompsites. MMT is a clay imineral consisting of stacked silicate sheets whose thickness is about 10A. Through intercalation a large number of polymer-clay nanocomposites have been prepared such as Nylon-clay hybrid [1], PS-clay hybrid [2], Poly (methyl methacrylate) (PMMA)-clay hybrid [3], etc. In this article, the synthesis and properties of Poly (acrylic acid/acrylamide)/MMT hybrid (PAAAM/MMT) were studied. X-ray diffraction and Transmission electron microscopy were used to characterize the hybrid material. DSC has been used to study its property. Results showed that the intercalating reagents have entered the space of MMT's layers and enlarged them. At the same time, the MMT dispersed homogeneously in acrylic acid and acrylamide monomers that allow MMT to disperse in PAAAM matrix in the monolayer form.

  15. Evaluation of three reagent dosing strategies in a photo-Fenton process for the decolorization of azo dye mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Prato-Garcia, D. [Laboratory for Research on Advanced Processes for Water Treatment, Instituto de Ingenieria, Unidad Academica Juriquilla, Universidad Nacional Autonoma de Mexico, Blvd. Juriquilla 3001, Queretaro 76230 (Mexico); Buitron, German, E-mail: gbuitronm@iingen.unam.mx [Laboratory for Research on Advanced Processes for Water Treatment, Instituto de Ingenieria, Unidad Academica Juriquilla, Universidad Nacional Autonoma de Mexico, Blvd. Juriquilla 3001, Queretaro 76230 (Mexico)

    2012-05-30

    Highlights: Black-Right-Pointing-Pointer Dosing strategies for a photo-Fenton process were evaluated. Black-Right-Pointing-Pointer The dosing strategy had no effect of on the decolorization. Black-Right-Pointing-Pointer The type of strategy influenced SUVA index, toxicity reduction and biodegradability. Black-Right-Pointing-Pointer A continuous reagents supply was found to be the most adequate strategy. Black-Right-Pointing-Pointer Decolorization as well as a less toxic and biodegradable effluent was produced. - Abstract: Three reagent dosing strategies used in the solar photo-assisted decolorization of a mixture of sulfonated dyes consisting of acid blue 113, acid orange 7 and acid red 151 were evaluated. Results demonstrated that the dosing strategy influenced both reagent consumption and the biodegradability and toxicity of the effluent. In one strategy (E{sub 1}), the Fenton's reactants were dosed in a punctual mode, while in the other two strategies (E{sub 2} an E{sub 3}), the reactants were dosed continuously. In the E{sub 2} strategy the reactants were dosed by varying the duration of the injection time. In the E{sub 3} strategy, the reactants were dosed during 60 min at a constant rate, but with different concentrations. All cases showed that feeding the reactor between 40% and 60% of the maximal dose was sufficient to decolorize more than 90% of the mixture of azo dyes. The E{sub 1} strategy was less effective for aromatic content reduction. Conversely, the continuous addition of the reagents (E{sub 2} and E{sub 3} strategies) improved the aromatic content removal. E{sub 3} strategy was substantially more appropriate than E{sub 1} strategy due to improved the effluent quality in two key areas: toxicity and biodegradability.

  16. Mild and Phosphine-Free Iron-Catalyzed Cross-Coupling of Nonactivated Secondary Alkyl Halides with Alkynyl Grignard Reagents

    OpenAIRE

    Cheung, Chi Wai; Ren, Peng; Hu, Xile

    2014-01-01

    A simple protocol for iron-catalyzed cross-coupling of nonactivated secondary alkyl bromides and iodides with alkynyl Grignard reagents at room temperature has been developed. A wide range of secondary alkyl halides and terminal alkynes are tolerated to afford the substituted alkynes in good yields. A slight modification of the reaction protocol also allows for cross-coupling with a variety of primary alkyl halides.

  17. Convenient Synthesis of Multi-dentate P,N-Ligand by HCl Elimination of N-Hetrocycle with Organophosphine Reagent

    Institute of Scientific and Technical Information of China (English)

    LI,Qing-Shan; WAN,Chong-Qing; XU,Feng-Bo; ZHANG,Zheng-Zhi

    2004-01-01

    @@ The multi-dentate ligands and their complexes have attracted more and more interests in supramolecular chemistry and catalysis.[1,2] Recently, we found a convenient and efficient method to synthesize this kind of P,N-ligands. The C-Hor C-Cl bond in N-heterocycle was activated in presence of corresponding organophospine reagent and the HCl elimination was fluent, giving the multi-dentate P,N-ligands.

  18. Influence of Fenton's reagent treatment on electrochemical properties of graphite felt for all vanadium redox flow battery

    International Nuclear Information System (INIS)

    Highlights: ► Highly hydroxyl-functionalized graphite felt has been obtained through Fenton's reagent treatment. ► Fenton's reagent treatment involves only one step, works under ambient conditions and will never produce any toxic gas. ► The treated graphite felt exhibits superior electrochemical performance in comparison to the untreated one. -- Abstract: An environmental, economic and highly effective method for carbon fiber hydroxylated-functionalization based on Fenton's reagent treatment is used to improve the electrochemical activity of graphite felt (GF) as the positive electrode in all vanadium redox flow battery (VRFB). The effect of H2O2 content in Fenton's reagent on the structure and electrochemical properties of GF is investigated. The scanning electron microscope (SEM) indicates that the surface of the treated GF is etched increasingly with the content of H2O2. The Fourier transformation infrared (FTIR) spectroscopy shows that the peak intensity of hydroxyl groups on the treated felt is increased with the H2O2 concentration, which is further verified by X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) show that the treated sample exhibits a higher electrochemical activity. A VRFB with the treated GF as electrodes exhibits higher coulombic, voltage and energy efficiency (98.8%, 75.1% and 74.2%) than that with the untreated GF (93.9%, 72.1% and 67.7%) at 60 mA cm−2, and this method is even superior when compared with the reported methods

  19. Nickel-Catalyzed Dimerization and Alkylarylation of 1,3-Dienes with Alkyl Fluorides and Aryl Grignard Reagents.

    Science.gov (United States)

    Iwasaki, Takanori; Min, Xin; Fukuoka, Asuka; Kuniyasu, Hitoshi; Kambe, Nobuaki

    2016-04-25

    In the presence of a nickel catalyst, 1,3-butadiene undergoes selective dimerization and alkylarylation with alkyl fluorides and aryl Grignard reagents to give 1,6-octadienes with alkyl and aryl groups at the 3- and 8-positions, respectively, by the consecutive formation of three carbon-carbon bonds. The formation of an anionic nickel complex plays an important role in forming C-C bonds with alkyl fluorides. PMID:26938137

  20. Evaluation of Real-Time PCR Laboratory-Developed Tests Using Analyte-Specific Reagents for Cytomegalovirus Quantification▿

    OpenAIRE

    Caliendo, Angela M.; Ingersoll, Jessica; Fox-Canale, Andrea M.; Pargman, Sabine; Bythwood, Tameka; Hayden, Mary K.; Bremer, James W.; Lurain, Nell S.

    2007-01-01

    Viral load testing for cytomegalovirus (CMV) has become the standard for the diagnosis of infection and monitoring of therapy at many transplant centers. However, no viral load test has been approved by the FDA. Therefore, many laboratories rely on laboratory-developed assays. This study evaluated the performance characteristics of two real-time PCR tests developed using the artus CMV analyte-specific reagents (ASRs). One version is distributed by Abbott Molecular and the other by QIAGEN. For...

  1. The Distribution of Technetium in U/Pu Partition Step of Advanced Purex Process Based on Organic Reagents

    Institute of Scientific and Technical Information of China (English)

    WANG; Hui; WEI; Yan; LIU; Fang; JIA; Yong-fen; LIU; Zhan-yuan

    2012-01-01

    <正>Advanced Purex process based on organic reagents (APOR) is an advanced Purex process, where monomethylhydrazine (MMH)-dimethylhydroxylamine (DMHAN) are adopted as salt-free plutonium- reductant in the partition step. During this step, technetium mainly goes into aqueous plutonium stream, and the aim of our work is to explain this phenomena. Reaction kinetic experiments and process experiments with mixer-settler were carried out for this purpose.

  2. [Differences in Measured Values among Homogenous Assay Reagents of LDL-C in LP-X Positive Serum Samples].

    Science.gov (United States)

    Abe, Misako; Kurosawa, Hideo; Sato, Ryo; Ito, Kumie; Tomono, Yoshiharu; Manita, Daisuke; Hirowatari, Yuji; Yoshida, Hiroshi

    2015-03-01

    The LDL-C level measures with homogeneous (direct) assays in almost of clinical laboratories. Several reports however showed differences in measured values among the assay reagents. We investigated the differences in LDL-C values among direct assays and Friedewald formula (F-f) in 58 LP-X positive serum samples from jaundice patients by comparing LDL-C values measured by anion-exchange chromatography (AEX-HPLC), largely comparable to ultracentrifugation method. Changes in LDL-C values during the treatment of 8 patients were also investigated. Direct assay reagents from Sekisui Medical (S-r), Denka-Seiken (D-r), Wako Chemical (W-r), and Kyowa Medics (K-r) were used for comparison. F-f, S-r, and D-r correlated with AEX-HPLC with r values 0.6. Two samples in which F-f values provided 500 mg/dL plus bias to AEX-HPLC (LDL-C value of 220 mg/dL) demonstrated increased levels of IDL-C before treatment. LDL-C values (S-r and D-r) of the 2 samples were relatively high and near to F-f data while LDL-C values (W-r and K-r) were relatively low and close to AEX-HPLC data. The jaundice treatment decreased LDL-C values (S-r and D-r) and converged to 220 mg/dL, indicating that S-r and D-r might react markedly to IDL. These changes were consistent with decreases in serum free cholesterol and phospholipid in support of LP-X. By contrast, W-r and K-r data showed upward tendency and also converged to 220 mg/dL. These results suggest that LDL-C direct assay reagents would be classified into 2 groups with respect to the reagent reactivity to LP-X. PMID:26524853

  3. Use of Fenton reagent combined with humic acids for the removal of PFOA from contaminated water.

    Science.gov (United States)

    Santos, Aurora; Rodríguez, Sergio; Pardo, Fernando; Romero, Arturo

    2016-09-01

    Perfluorinated compounds (PFCs) are receiving significant attention due to its global distribution, high persistence, and bioaccumulation properties. Among them, perfluorooctanoic acid (PFOA) is one of the most commonly found in the environment. The strong bond C-F in PFOA is extremely difficult to degrade, therefore advanced oxidation processes (AOPs) at room temperature and pressure are not able to oxidize them, as was noticed here using Fenton like reagent (FR) or persulfate (PS) at 25°C. On the contrary, by using persulfate activated by heat (100mM and T=70°C) a complete defluorination of PFOA 0.1mM was noticed after 18h, with a sequential degradation mechanism of losing one CF2 unit from PFOA and its intermediates (perfluoroheptanoic acid (PFHpA), perfluorohexanoic acid (PFHxA), perfluoropentanoic acid (PFPA) and perfluorobutanoic acid (PFBA)). Since this thermal treatment is not usually desirable from an economical point of view, alternative process has been tested. For this scope, a hybrid process is proposed in this work, by adding humic acid, HA, (600mgL(-1)) and FR, (165mM in H2O2 and 3mM in Fe(3+)) to the 0.1mM PFOA solution. It was found that the HA was oxidized by FR. PFOA was entrapped quantitatively and irreversibly during HA oxidation, resulting PFOA non-available to the aqueous phase. Oxidized HA with PFOA entrapped precipitates. Both, the leftover Fe(III) acting as a coagulant and neutral pH enhance the separation of this solid phase. The precipitation noticed by adding HA to the PFOA solution in absence of FR was negligible. PMID:26412418

  4. Multi-scale Control and Enhancement of Reactor Boiling Heat Flux by Reagents and Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Manglik, R M; Athavale, A; Kalaikadal, D S; Deodhar, A; Verma, U

    2011-09-02

    The phenomenological characterization of the use of non-invasive and passive techniques to enhance the boiling heat transfer in water has been carried out in this extended study. It provides fundamental enhanced heat transfer data for nucleate boiling and discusses the associated physics with the aim of addressing future and next-generation reactor thermal-hydraulic management. It essentially addresses the hypothesis that in phase-change processes during boiling, the primary mechanisms can be related to the liquid-vapor interfacial tension and surface wetting at the solidliquid interface. These interfacial characteristics can be significantly altered and decoupled by introducing small quantities of additives in water, such as surface-active polymers, surfactants, and nanoparticles. The changes are fundamentally caused at a molecular-scale by the relative bulk molecular dynamics and adsorption-desorption of the additive at the liquid-vapor interface, and its physisorption and electrokinetics at the liquid-solid interface. At the micro-scale, the transient transport mechanisms at the solid-liquid-vapor interface during nucleation and bubblegrowth can be attributed to thin-film spreading, surface-micro-cavity activation, and micro-layer evaporation. Furthermore at the macro-scale, the heat transport is in turn governed by the bubble growth and distribution, macro-layer heat transfer, bubble dynamics (bubble coalescence, collapse, break-up, and translation), and liquid rheology. Some of these behaviors and processes are measured and characterized in this study, the outcomes of which advance the concomitant fundamental physics, as well as provide insights for developing control strategies for the molecular-scale manipulation of interfacial tension and surface wetting in boiling by means of polymeric reagents, surfactants, and other soluble surface-active additives.

  5. Metabolism of spacecraft cleaning reagents by Mars Odyssey and Phoenix-associated Acinetobacter

    Science.gov (United States)

    Mogul, Rakesh; Barding, Gregory; Baki, Ryan; Perkins, Nicole; Lee, Sooji; Lalla, Sid; Campos, Alexa; Sripong, Kimberly; Madrid, Steve

    2016-07-01

    The metabolomic and proteomic properties that promote microbial survival in spacecraft assembly facilities are important aspects to planetary protection and astrobiology. In this presentation, we will provide molecular and biological evidence that the spacecraft-associated Acinetobacter metabolize/degrade spacecraft cleaning reagents such as ethanol, 2-propanol, and Kleenol-30. Gas chromatography-mass spectrometry (GC-MS) studies on A. radioresistens 50v1 (Mars Odyssey) show that the metabolome is dependent upon growth conditions and that ^{13}C-labeled ethanol is incorporated into metabolites such as TCA/glyoxylate cycle intermediates, amino acids, monosaccharides, and disaccharides (e.g., trehalose). In fact, plate count assays show that ethanol is a sole carbon source under minimal conditions for several Mars Phoenix and Odyssey-associated Acinetobacter strains, which may explain why the Acinetobacter are among the most abundant genera found in spacecraft assembly facilities. Biochemical analyses support the enzymatic oxidation of ethanol and 2-propanol by a membrane-bound and NAD+/PQQ-dependent alcohol dehydrogenase, with current kinetic data providing similar apparent K _{M} and maximum growth rate values of ˜5 and 8 mM ethanol, respectively. Preliminary GC-MS analysis also suggests that Kleenol-30 is degraded by A. radioresistens 50v1 when grown in ethanol mixtures. Under minimal conditions, A. radioresistens 50v1 (˜10 ^{8} cfu/mL) also displays a remarkable oxidative extremotolerance (˜2-log reduction in 10 mM hydrogen peroxide), which suggests crucial roles for metabolites associated with oxidative stress (e.g., trehalose) and the observed appreciable catalase specific activities. In conclusion, these results provide key insights into the survival strategies of spacecraft-associated Acinetobacter and emphasize the importance of characterizing the carbon metabolism of forward contaminants.

  6. Optimal Condition of Fenton's Reagent to Enhance the Alcohol Production from Palm Oil Mill Effluent (POME

    Directory of Open Access Journals (Sweden)

    Supawadee Sinnaraprasat

    2011-07-01

    Full Text Available Application of Fenton's reaction for a proper hydrolysis step is an essential and important step in obtaining a higher level of readily biodegradable sugars from palm oil mill effluent (POME for improving the alcohol production by using immobilized Clostridium acetobutylicum. The objective of this research was, therefore, to investigate the optimum condition of Fenton's reaction in terms of COD: H2O2 ratios (w/w and H2O2: Fe2+ ratios (molar ratio used to oxidize carbohydrate and high molecular organic compounds into simple sugars, which are further fermented into alcohol. The experiments were carried out at H2O2: Fe2+ ratios (molar ratios of 5, 10, 20, 30 and 40 and the COD: H2O2 ratios (w/w of 50, 70, 100 and 130 (initial COD about 50,000 mg/L. The total sugar concentrations and organic compounds biodegradability (BOD5/COD ratios were also used for investigating suitable conditions for Fenton's reaction. The concentration of Fenton's reagent at H2O2:Fe2+ and COD:H2O2 ratio of 20 and 130 was identified as the optimum operating condition for the highest simple sugars of about 0.865% and BOD5/COD ratios of 0.539. The alcohol productions were carried out in the continuous stirred tank reactors (CSTR under an anaerobic continuous immobilization system. At a hydraulic retention time of 12 hours and POME pH of 4.8, the maximum total ABE concentration of 495 mg/L and the ABE yield of 0.236 grams of ABE produced/gram of reducing sugars were achieved at the mixed polyvinyl alcohol (PVA and palm oil ash (POA ratio of 10 : 3.

  7. Evaluation of the resin oxidation process using Fenton's reagent

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Leandro G.; Goes, Marcos M.; Marumo, Julio T., E-mail: jtmarumo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    The ion exchange resin is considered radioactive waste after its final useful life in nuclear reactors. Usually, this type of waste is treated with the immobilization in cement Portland, in order to form a solid monolithic matrix, reducing the possibility of radionuclides release in to environment. Because of the characteristic of expansion and contraction of the resins in presence of water, its incorporation in the common Portland cement is limited in 10% in direct immobilization, causing high costs in the final product. A pre-treatment would be able to reduce the volume, degrading the resins and increasing the load capacity of this material. This paper is about a method of degradation of ion spent resins from the nuclear research reactor of Nuclear and Energy Research Institute (IPEN/CNEN-SP), Brazil, using the Fenton's reagent. The resin evaluated was a mixture of cationic and anionic resins. The reactions were conducted by varying the concentration of the catalyst (25 to 80 mM), with and without external heat. The time of reaction was two hours. The concentration of 50 mM of catalyst was the most effective in degrading approximately 99%. The resin degradation was confirmed by the presence of CaCO{sub 3} as a white precipitate resulting from the reaction between the Ca(OH){sub 2} and the CO{sub 2} from the resin degradation. It was possible to degrade the resins without external heating. The calcium carbonates showed no correlation with the residual resin mass. (author)

  8. Multi-scale Control and Enhancement of Reactor Boiling Heat Flux by Reagents and Nanoparticles

    International Nuclear Information System (INIS)

    The phenomenological characterization of the use of non-invasive and passive techniques to enhance the boiling heat transfer in water has been carried out in this extended study. It provides fundamental enhanced heat transfer data for nucleate boiling and discusses the associated physics with the aim of addressing future and next-generation reactor thermal-hydraulic management. It essentially addresses the hypothesis that in phase-change processes during boiling, the primary mechanisms can be related to the liquid-vapor interfacial tension and surface wetting at the solidliquid interface. These interfacial characteristics can be significantly altered and decoupled by introducing small quantities of additives in water, such as surface-active polymers, surfactants, and nanoparticles. The changes are fundamentally caused at a molecular-scale by the relative bulk molecular dynamics and adsorption-desorption of the additive at the liquid-vapor interface, and its physisorption and electrokinetics at the liquid-solid interface. At the micro-scale, the transient transport mechanisms at the solid-liquid-vapor interface during nucleation and bubblegrowth can be attributed to thin-film spreading, surface-micro-cavity activation, and micro-layer evaporation. Furthermore at the macro-scale, the heat transport is in turn governed by the bubble growth and distribution, macro-layer heat transfer, bubble dynamics (bubble coalescence, collapse, break-up, and translation), and liquid rheology. Some of these behaviors and processes are measured and characterized in this study, the outcomes of which advance the concomitant fundamental physics, as well as provide insights for developing control strategies for the molecular-scale manipulation of interfacial tension and surface wetting in boiling by means of polymeric reagents, surfactants, and other soluble surface-active additives.

  9. A study of the relationship between albuminuria, proteinuria and urinary reagent strips.

    LENUS (Irish Health Repository)

    Collier, Geraldine

    2012-02-01

    BACKGROUND: The aims of this study were to examine the relationship between proteinuria and albuminuria and to assess the equivalence between the albumin to creatinine ratio (ACR) and the protein to creatinine ratio (PCR) at the cut-offs recommended by the National Institute for Health and Clinical Excellence (NICE) guidance on chronic kidney disease. The sensitivity and specificity of the reagent strips used in our laboratory for the detection of clinical proteinuria was also assessed. METHODS: Urine samples (n = 117) were screened for protein using the Bayer Multistix 10SG and read manually. Urinary total protein and creatinine was measured on the Roche P Modular by the benzethonium chloride and kinetic Jaffe methods, respectively. Urinary albumin was measured by immunoturbidimetry on the Roche Cobas Mira. RESULTS: The relationship between urinary protein and albumin loss was non-linear (P < 0.05). As urinary protein loss increased the percentage of albumin to total protein increased. At the NICE guidance recommended cut-offs for clinical proteinuria (ACR > or =30 mg\\/mmol and PCR > or =50 mg\\/mmol) there was one discordant result between ACR and PCR (ACR <30 mg\\/mmol and PCR >50 mg\\/mmol). The Bayer Multistix 10SG had a sensitivity and specificity of 97% and 62%, respectively, for the detection of clinical proteinuria compared with ACR. CONCLUSIONS: The proportion of urinary total protein attributable to albumin changes with concentration. There was only one discordant result between ACR and PCR: therefore either ratio may be used for the identification of clinical proteinuria. As a screening test for proteinuria, the Bayer Multistix 10SG had an acceptable sensitivity but poor specificity.

  10. A comparison between alkaline and decomplexing reagents to extract humic acids from low rank coals

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, D.; Cegarra, J.; Abad, M. [CSIC, Madrid (Spain). Centro de Edafologia y Biologia Aplicada del Segura

    1996-07-01

    Humic acids (HAs) were obtained from two low rank coals (lignite and leonardite) by using either alkali extractants (0.1 M NaOH, 0.1 M KOH or 0.25 M KOH) or solutions containing Na{sub 4}P{sub 2}O{sub 7} (0.1 M Na{sub 4}P{sub 2}O{sub 7} or 0.1 M NaOH/Na{sub 4}P{sub 2}O{sub 7}). In both coals, the greatest yields were obtained with 0.25 M KOH and the lowest with the 0.1 M alkalis, whereas the extractions based on Na{sub 4}P{sub 2}O{sub 7} yielded intermediate values and were more effective on the lignite. Chemical analysis showed that the leonardite HAs consisted of molecules that were less oxidized and had fewer functional groups than the HAs released form the lignite. Moreover, the HAs extracted by reagents containing Na{sub 4}P{sub 2}O{sub 7} exhibited more functional groups than those extracted with alkali, this effect being more apparent in lignite because of its greater cation exchange capacity. Gel permeation chromatography indicated that the leonardite HAs contained a greater proportion of higher molecular size compounds than the lignite HAs, and that both solutions containing Na{sub 4}P{sub 2}O{sub 7} released HAs with a greater proportion of smaller molecular compounds from the lignite than did the alkali extractants. 16 refs., 3 figs., 2 tabs.

  11. Effect of Flotation Reagents on the Cake Moisture of Copper Concentrate

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The effect of reagents used in separating chalcopyrite from pyrite on the cake moisture of the copper concentrate at Daye Iron Mine Mineral Processing Plant was investigated. The results showed that the dosage of lime used for depressing pyrite was the main factor that increased the filter cake moisture of copper concentrate. With increasing the dosage of lime, the cake moisture of copper concentrate increased sharply. The cause was concluded to be the addition of lime to the pulp, which resulted in the formation of floc and a high pH value. The collector Z-200#, used for collecting chalcopyrite, had, as well, an adverse effect on the cake moisture of copper concentrate, but its effect was inferior in respect to that of lime. The cake moisture of copper concentrate can be decreased by changing the method with which lime is added and the pH value of pulp is regulated. The experiment results showed that the sulfuric acid was the best regulator. When the clarified liquor of lime was used as a depressant and the pH value of the pulp was regulated to 6.5€?7.0 by adding sulfuric acid, the cake moisture of copper concentrate was reduced from 15.49% to 13.13%. The examination of chalcopyrite surface by using ESCA (Electron Spectroscopy for Chemical Analysis) showed that calcium sulfate and iron hydroxide had formed on the surface of chalcopyrite when lime was added to the pulp. The formation of calcium sulfate and iron hydroxide on its surface increased the hydrophilicity of chalcopyrite so that its cake moisture increased. The addition of sulfuric acid to the pulp not only removed the calcium sulfate, but also reduced the concentration of iron hydroxide on the surface of chalcopyrite so that the cake moisture of copper concentrate was decreased.

  12. Use of Fenton reagent combined with humic acids for the removal of PFOA from contaminated water.

    Science.gov (United States)

    Santos, Aurora; Rodríguez, Sergio; Pardo, Fernando; Romero, Arturo

    2016-09-01

    Perfluorinated compounds (PFCs) are receiving significant attention due to its global distribution, high persistence, and bioaccumulation properties. Among them, perfluorooctanoic acid (PFOA) is one of the most commonly found in the environment. The strong bond C-F in PFOA is extremely difficult to degrade, therefore advanced oxidation processes (AOPs) at room temperature and pressure are not able to oxidize them, as was noticed here using Fenton like reagent (FR) or persulfate (PS) at 25°C. On the contrary, by using persulfate activated by heat (100mM and T=70°C) a complete defluorination of PFOA 0.1mM was noticed after 18h, with a sequential degradation mechanism of losing one CF2 unit from PFOA and its intermediates (perfluoroheptanoic acid (PFHpA), perfluorohexanoic acid (PFHxA), perfluoropentanoic acid (PFPA) and perfluorobutanoic acid (PFBA)). Since this thermal treatment is not usually desirable from an economical point of view, alternative process has been tested. For this scope, a hybrid process is proposed in this work, by adding humic acid, HA, (600mgL(-1)) and FR, (165mM in H2O2 and 3mM in Fe(3+)) to the 0.1mM PFOA solution. It was found that the HA was oxidized by FR. PFOA was entrapped quantitatively and irreversibly during HA oxidation, resulting PFOA non-available to the aqueous phase. Oxidized HA with PFOA entrapped precipitates. Both, the leftover Fe(III) acting as a coagulant and neutral pH enhance the separation of this solid phase. The precipitation noticed by adding HA to the PFOA solution in absence of FR was negligible.

  13. Anti-TNP monoclonal antibodies as reagents for enzyme immunoassay (ELISA).

    Science.gov (United States)

    Léo, P; Ucelli, P; Augusto, E F; Oliveira, M S; Tamashiro, W M

    2000-12-01

    The aim of this study was to produce anti-TNP monoclonal antibodies (MAbs) that could be conjugated and used for the detection of antigen-antibody reactions, in which the antigen specific-antibody had been previously bound to trinitrophenyl (TNP). For hybridoma production, SP2/0-Ag14 cells were fused with spleen cells from mice previously immunized with TNP-ovalbumin (TNP-OVA). After 10 days, enzyme-linked immunoadsorbent assay (ELISA) was used to detect anti-TNP antibodies in the supernatants, and five cultures were found to be strictly positive for TNP. Three of these were subsequently cloned by limiting dilution, and 15 clones were chosen for expansion based on the criterion of high reactivity against TNP. Anti-TNP MAbs produced by those clones were isotyped as IgG1, and purified by Sepharose-protein G affinity cromatography from ascites developed in BALB/c mice. Two purified MAbs (1B2.1B6 and 1B2.1E12) were coupled to horseradish peroxidase (HRPO). The resulting conjugates were evaluated in ELISA tests for interferon-gamma and interleukin-4 detection, in which the secondary anti-cytokine antibodies were coupled either to TNP or biotin. The performance of anti-TNP conjugates in these assays were compared with a biotin-streptavidin/peroxidase system. Both types of conjugates were similarly able to detect cytokines with r2 (linear correlation coefficient) close to unity value. Growth studies of one of those hybridomas (1B2.1B6) yielded a specific growth rate of 0.042 h(-1) and a doubling time of 16.5 h. Data discussed here show that at least two MAbs against TNP raised in this work can be used as a reagent for enzyme immunoassays. PMID:11152399

  14. Preparation of niobium nanoparticles by sodiothermic reduction of Nb_2O_5 in molten salts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Niobium nanoparticles with high purity were prepared by a sodiothermic reduction process using Nb2O5 as the raw material, LiCl, NaCl, KCl and CaCl2 as the diluents and sodium as the reducing reagent. The effects of the different molten salt systems, CaCl2 content, reaction time, excessive sodium and reaction temperature on the characteristics of the obtained niobium powder were discussed. The as-prepared niobium nanoparticles under the optimum experimental conditions were obtained by sodiothermic reduction ...

  15. Standard method for continuous measurement of nitric oxide, nitrogen dioxide, and ozone in the atmosphere. [Calorimetrically using Griess Reagent

    Energy Technology Data Exchange (ETDEWEB)

    1975-01-01

    Nitrogen dioxide is absorbed from the atmosphere in a modified Griess reagent which contains 0.5 percent sulfanilic acid and 50 ppM of N-(1-naphthyl)-ethylene diamine hydrochloride in 5 percent acetic acid that produces a red dye. The red dye is measured continuously in a recording colorimeter by comparison with a blank of unreacted reagent. Nitric oxide from the atmosphere passes through the absorber practically unaffected and is oxidized to nitrogen dioxide by bubbling through a dilute permanganate solution prior to determination with modified Griess reagent in a separate cell. Optionally, ozone in the air sample may be determined in a third absorber-colorimeter cell unit by adding about 0.5 to 1.0 ppM of pure nitric oxide to another sample of air and noting the increase in nitrogen dioxide level due to the rapid oxidation of nitric oxide to nitrogen dioxide by ozone. The overall accuracy of the results of the method is +-10 percent. (BLM)

  16. Evaluation of reagent strips for ascitic fluid leukocyte determination: is it a possible alternative for spontaneous bacterial peritonitis rapid diagnosis?

    Directory of Open Access Journals (Sweden)

    Tarsila C.R. Ribeiro

    2007-02-01

    Full Text Available In order to evaluate the accuracy of a urine reagent dipstick (Multistix 10SG® to determine ascitic fluid leukocyte count, we prospectively studied 106 cirrhotic patients from April 2003 to December 2004, in two different centers (Federal University of São Paulo - UNIFESP-EPM and Federal University of Juiz de Fora - HU-UFJF for the rapid bedside diagnosis of spontaneous bacterial peritonitis. The mean age 54 ± 12 years, there was a predominance of males (eighty-two patients, 77%, and alcohol was the most frequent etiology (43%. Forty-four percent of patients were classified as Child B and fifty-one as Child C (51%. Abdominal paracentesis was performed both in outpatient and inpatient settings and the Multistix 10SG® was tested. Eleven cases of spontaneous bacterial peritonitis were identified by means of polymorphonuclear count. If we considered the positive Multistix 10SG® result of 3 or more, the sensitivity, specificity, positive and negative predictive value were respectively 71%, 99%, 91% and 98%. With a positive reagent strip result taken as grade 2 (traces or more, sensitivity was 86% and specificity was 96% with positive and negative predictive values of 60% and 99%, respectively. Diagnostic accuracy was 95%. We concluded that the use of a urine reagent dipstick (Multistix 10SG® could be considered a quick, easy and cheap method for ascitic fluid cellularity determination in SBP diagnosis.

  17. Effects of operating parameters on advanced oxidation of diuron by the Fenton's reagent: a statistical design approach.

    Science.gov (United States)

    Catalkaya, Ebru Cokay; Kargi, Fikret

    2007-09-01

    Advanced oxidation of diuron in aqueous solution by Fenton's reagent using FeSO(4) as source of Fe(II) was investigated in the absence of light. Effects of operating parameters namely the concentrations of pesticide (diuron), H(2)O(2) and Fe(II) on oxidation of diuron was investigated by using Box-Behnken statistical experiment design and the surface response analysis. Diuron oxidation by the Fenton reagent was evaluated by determining the total organic carbon (TOC), diuron, and adsorbable organic halogen (AOX) removals. Concentration ranges of the reagents resulting in the highest level of diuron oxidation were determined. Diuron removal increased with increasing H(2)O(2) and Fe(II) concentrations up to a certain level. Diuron concentration had a more profound effect than H(2)O(2) and Fe(II) in removal of diuron, TOC and AOX from the aqueous solution. Nearly complete (98.5%) disappearance of diuron was achieved after 15min reaction period. However, only 58% of diuron was mineralized after 240min under optimal operating conditions indicating formation of some intermediate products. Optimal H(2)O(2)/Fe(II)/diuron ratio resulting in the maximum diuron removal (98.5%) was found to be 302/38/20 (mgl(-1)).

  18. Comparison of urine filtration and a chemical reagent strip in the diagnosis of urinary schistosomiasis in Ethiopia.

    Science.gov (United States)

    Birrie, H; Medhin, G; Jemaneh, L

    1995-03-01

    The diagnostic efficacy of a chemical reagent strip (Ames Multistix) was compared with syringe-Nytrel urine filtration technique in the detection of S. haematobium infection at varying disease endemicity levels in the Awash Valley of Ethiopia. In low endemicity area (Afambo), the reagent strip showed highest sensitivity, specificity, positive predictive value and negative predictive value of 80%, 96%, 40% and 99% respectively at "1+ limit" of microhaematuria. In the moderate (Dahitele) to high (Enta Doyta) areas, the highest diagnostic values of 77%, 83%, 56% and 93% respectively and 78%, 67%, 51% and 87% respectively were obtained at "trace limit". Using these cut-off points of haematuria, the prevalence of S. haematobium were 4.5%, 30.8% and 47% at low, moderate and high endemicity areas compared to 3.2%, 21% and 31% respectively using the filtration technique. A highly significant (maximum Kendall's tau = 0.44271; p < 0.002) was observed between N + 1 transformed geometric mean egg counts and micro-haematuria in the 10-19 years of age at all levels of endemicity. The efficacy and simplicity of chemical reagent strips and limitations of single parasitological examinations are discussed. PMID:7796771

  19. Studies on Y{sub 2}O{sub 3}:Eu phosphor with different particle size prepared by wet chemical method

    Energy Technology Data Exchange (ETDEWEB)

    Muresan, Laura, E-mail: laura_muresan2003@yahoo.co [Raluca Ripan Institute for Research in Chemistry, Fantanele 30, 400294 Cluj-Napoca (Romania); Popovici, Elisabeth Jeanne; Imre-Lucaci, Florica; Grecu, Rodica [Raluca Ripan Institute for Research in Chemistry, Fantanele 30, 400294 Cluj-Napoca (Romania); Indrea, Emil [National Institute for R and D of Isotopic and Molecular Technologies, 400295, Cluj-Napoca Romania (Romania)

    2009-08-26

    Europium activated yttrium oxide phosphors were prepared by reagent simultaneous addition technique, using oxalic acid as precipitating reagent. The aim of the paper is to establish the flux influence and thermal regime on photoluminescence and morpho-structural characteristics of phosphor powders. In this respect different mineralising agents such as sodium/lithium carbonate, sodium tetraborate ans sodium pyrophosphate were used during the thermal synthesis stage. Thermal analysis, X-ray diffraction, scanning electron microscopy, infrared spectroscopy and photoluminescence measurements were used to investigate precursor and phosphor powders. The correlation between the phosphor properties and precursor quality enabled us to select the optimal synthesis conditions.

  20. Metal Nanoparticles Preparation In Supercritical Carbon Dioxide Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Harry W. Rollins

    2004-04-01

    The novel optical, electronic, and/or magnetic properties of metal and semiconductor nanoparticles have resulted in extensive research on new methods for their preparation. An ideal preparation method would allow the particle size, size distribution, crystallinity, and particle shape to be easily controlled, and would be applicable to a wide variety of material systems. Numerous preparation methods have been reported, each with its inherent advantages and disadvantages; however, an ideal method has yet to emerge. The most widely applied methods for nanoparticle preparation include the sonochemical reduction of organometallic reagents,(1&2) the solvothermal method of Alivisatos,(3) reactions in microemulsions,(4-6) the polyol method (reduction by alcohols),(7-9) and the use of polymer and solgel materials as hosts.(10-13) In addition to these methods, there are a variety of methods that take advantage of the unique properties of a supercritical fluid.(14&15) Through simple variations of temperature and pressure, the properties of a supercritical fluid can be continuously tuned from gas-like to liquid-like without undergoing a phase change. Nanoparticle preparation methods that utilize supercritical fluids are briefly reviewed below using the following categories: Rapid Expansion of Supercritical Solutions (RESS), Reactive Supercritical Fluid Processing, and Supercritical Fluid Microemulsions. Because of its easily accessible critical temperature and pressure and environmentally benign nature, carbon dioxide is the most widely used supercritical solvent. Supercritical CO2 is unfortunately a poor solvent for many polar or ionic species, which has impeded its use in the preparation of metal and semiconductor nanoparticles. We have developed a reactive supercritical fluid processing method using supercritical carbon dioxide for the preparation of metal and metal sulfide particles and used it to prepare narrowly distributed nanoparticles of silver (Ag) and silver sulfide

  1. Multifunctional Pt(II) Reagents: Covalent Modifications of Pt Complexes Enable Diverse Structural Variation and In-Cell Detection.

    Science.gov (United States)

    White, Jonathan D; Haley, Michael M; DeRose, Victoria J

    2016-01-19

    To enhance the functionality of Pt-based reagents, several strategies have been developed that utilize Pt compounds modified with small, reactive handles. This Account encapsulates work done by us and other groups regarding the use of Pt(II) compounds with reactive handles for subsequent elaboration with fluorophores or other functional moieties. Described strategies include the incorporation of substituents for well-known condensation or nucleophilic displacement-type reactions and their use, for example, to tether spectroscopic handles to Pt reagents for in vivo investigation. Other chief uses of displacement-type reactions have included tethering various small molecules exhibiting pharmacological activity directly to Pt, thus adding synergistic effects. Click chemistry-based ligation techniques have also been applied, primarily with azide- and alkyne-appended Pt complexes. Orthogonally reactive click chemistry reactions have proven invaluable when more traditional nucleophilic displacement reactions induce side-reactivity with the Pt center or when systematic functionalization of a larger number of Pt complexes is desired. Additionally, a diverse assortment of Pt-fluorophore conjugates have been tethered via click chemistry conjugation. In addition to providing a convenient synthetic path for diversifying Pt compounds, the use of click-capable Pt complexes has proved a powerful strategy for postbinding covalent modification and detection with fluorescent probes. This strategy bypasses undesirable influences of the fluorophore camouflaged as reactivity due to Pt that may be present when detecting preattached Pt-fluorophore conjugates. Using postbinding strategies, Pt reagent distributions in HeLa and lung carcinoma (NCI-H460) cell cultures were observed with two different azide-modified Pt compounds, a monofunctional Pt(II)-acridine type and a difunctional Pt(II)-neutral complex. In addition, cellular distribution was observed with an alkyne-appended difunctional

  2. Sweet Nanochemistry: A Fast, Reliable Alternative Synthesis of Yellow Colloidal Silver Nanoparticles Using Benign Reagents

    Science.gov (United States)

    Cooke, Jason; Hebert, Dominique; Kelly, Joel A.

    2015-01-01

    This work describes a convenient and reliable laboratory experiment in nanochemistry that is flexible and adaptable to a wide range of educational settings. The rapid preparation of yellow colloidal silver nanoparticles is achieved by glucose reduction of silver nitrate in the presence of starch and sodium citrate in gently boiling water, using…

  3. Recovery of uranium low grade ores by froth flotation: study of the texture and synergetic effects of flotation reagents

    International Nuclear Information System (INIS)

    Due to the energy growing demand, uranium low grade ores may be those exploited in the future. Uranium ores conventional treatment does not often use mineral processing such as concentration methods for reducing leaching reagent consumption. The aim of this work is to develop an upgrading process to improve the operating process (alkaline heap leaching) taking into account the mineralogical and textural variability of the ore. The Trekkopje deposit is composed of calcrete and a gypscrete. The uranium bearing mineral is carnotite (K2(UO2)2 [VO4]2.3H2O). The gangue minerals are composed by silicates, such as quartz, feldspars, micas and Ca-minerals, calcite and gypsum (XRD and ICP-MS analysis). A SEM image processing was used to study the textural properties and the exposed free surface of mineral inclusions in clay clusters. In calcrete milled to -200 μm, 50 % of all carnotite is associated with clay clusters, which are composed by 98 % of palygorskite, 2 % of illite, montmorillonite, and interbedded clays (XRD and microprobe analysis). The carnotite grain size is 95 % less than 70 μm. Calcite is the main inclusion in clay clusters. Indeed, the calcite inclusions average rate in the clay clusters is 12 % and 5 % for carnotite inclusion. And the free exposed surface percentage of these minerals in clay clusters is 3 % and 6 %, thus indicating that the inclusions should not affect the behavior of mixed clay particles. However, ore flotation essays did not verify this hypothesis. Three minerals separation have been proposed based on the mineral ability to consume leaching reagents: separating Ca-minerals from silicates, palygorskite from gangue minerals and carnotite from gangue minerals. A study of silicates and Ca-minerals electrokinetic properties (electrophoresis) was carried out to select the collectors and the optimum pH range for selective flotation. Basic pH near neutral was proved to be optimal for the separation of gangue minerals with cationic or anionic

  4. T3P as an efficient cyclodehydration reagent for the one-pot synthesis of 2-amino-1,3,4-oxadiazoles

    Indian Academy of Sciences (India)

    Andivelu Ilangovan; Shanmugasundar Saravanakumar; Siddappa Umesh

    2015-05-01

    A scalable and environmentally friendly one-pot method for the synthesis of 2-amino-1,3,4-oxadiazoles from acylhydrazides and isocyanates has been achieved with propane phosponic anhydride (T3P) acting as cyclodehydrating reagent.

  5. MINERAL-SURFACTANT INTERACTIONS FOR MINIMUM REAGENTS PRECIPITATION AND ADSOPTION FOR IMPROVED OIL RECOVERY

    Energy Technology Data Exchange (ETDEWEB)

    P. Somasundaran

    2004-04-30

    The aim of the project is to delineate the role of mineralogy of reservoir rocks in determining interactions between reservoir minerals and externally added reagents (surfactants/polymers) and its effect on the solid-liquid and liquid-liquid interfacial properties such as adsorption, wettability and interfacial tension in systems relevant to reservoir conditions. Previous studies have suggested that significant surfactant loss by precipitation or adsorption on reservoir minerals can cause chemical schemes to be less than satisfactory for enhanced oil recovery. Both macroscopic adsorption, wettability and microscopic orientation and conformation studies for various surfactant/polymer mixtures/reservoir rocks systems will be conducted to explore the cause of chemical loss by means of precipitation or adsorption, and the effect of rock mineralogy on the chemical loss. During this reporting period, the minerals used have been characterized, for particle size distribution and surface area. Also a series of novel cationic Gemini surfactants: butane-1,4-bis(quaternary ammonium chloride), has been synthesized. The solution and adsorption behavior of individual surfactants, the highly surface-active Gemini surfactant C{sub 12}-C{sub 4}-C{sub 12}, the sugar-based nonionic surfactant n-dodecyl-{beta}-D-maltoside (DM) and their mixture has been studied. DM alone shows low adsorption on silica because of the lack of any electrostatic attraction between the surfactant and the silica particle. On the other hand, the cationic Gemini adsorbs markedly on the oppositely charged silica surface. Marked synergism has been observed in the case of DM/C{sub 12}-C{sub 4}-C{sub 12} mixture adsorption on silica. Adsorption of DM from the mixtures increases dramatically in both the rising part and the plateau regions. Adsorption of the cationic Gemini C{sub 12}-C{sub 4}-C{sub 12} from the mixture on the other hand increases in the rising part, but decreases in the plateau regions due to the

  6. MINERAL-SURFACTANT INTERACTIONS FOR MINIMUM REAGENTS PRECIPITATION AND ADSORPTION FOR IMPROVED OIL RECOVERY

    Energy Technology Data Exchange (ETDEWEB)

    P. Somasundaran

    2005-04-30

    The aim of this project is to delineate the role of mineralogy of reservoir rocks in determining interactions between reservoir minerals and externally added reagents (surfactants/polymers) and its effect on critical solid-liquid and liquid-liquid interfacial properties such as adsorption, wettability and interfacial tension in systems relevant to reservoir conditions. Previous studies have suggested that significant surfactant loss by precipitation or adsorption on reservoir minerals can cause chemical schemes to be less than satisfactory for enhanced oil recovery. Both macroscopic adsorption, wettability and microscopic orientation and conformation studies for various surfactant/polymer mixtures/reservoir rocks systems were conducted to explore the cause of chemical loss by means of precipitation or adsorption, and the effect of rock mineralogy on the chemical loss. During this period, the adsorption of mixed system of n-dodecyl-{beta}-D-maltoside (DM) and dodecyl sulfonate (C{sub 12}SO{sub 3}Na) has been studied. The effects of solution pH, surfactant mixing ratio and different salts on surfactant adsorption on alumina have been investigated in detail. Along with these adsorption studies, changes in mineral wettability due to the adsorption of the mixtures were determined under relevant conditions to identify the nano-structure of the adsorbed layers. Solution properties of C{sub 12}SO{sub 3}Na/DM mixtures were also studied to identify surfactant interactions that affect the mixed aggregate formation in solution. Adsorption of SDS on gypsum and limestone suggested stronger surfactant/mineral interaction than on alumina, due to the precipitation of surfactant by dissolved calcium ions. The effects of different salts such as sodium nitrate, sodium sulfite and sodium chloride on DM adsorption on alumina have also been determined. As surfactant hemimicelles at interface and micelles in solution have drastic effects on oil recovery processes, their microstructures in

  7. MINERAL-SURFACTANT INTERACTIONS FOR MINIMUM REAGENTS PRECIPITATION AND ADSORPTION FOR IMPROVED OIL RECOVERY

    International Nuclear Information System (INIS)

    The aim of this project is to delineate the role of mineralogy of reservoir rocks in determining interactions between reservoir minerals and externally added reagents (surfactants/polymers) and its effect on critical solid-liquid and liquid-liquid interfacial properties such as adsorption, wettability and interfacial tension in systems relevant to reservoir conditions. Previous studies have suggested that significant surfactant loss by precipitation or adsorption on reservoir minerals can cause chemical schemes to be less than satisfactory for enhanced oil recovery. Both macroscopic adsorption, wettability and microscopic orientation and conformation studies for various surfactant/polymer mixtures/reservoir rocks systems were conducted to explore the cause of chemical loss by means of precipitation or adsorption, and the effect of rock mineralogy on the chemical loss. During this period, the adsorption of mixed system of n-dodecyl-β-D-maltoside (DM) and dodecyl sulfonate (C12SO3Na) has been studied. The effects of solution pH, surfactant mixing ratio and different salts on surfactant adsorption on alumina have been investigated in detail. Along with these adsorption studies, changes in mineral wettability due to the adsorption of the mixtures were determined under relevant conditions to identify the nano-structure of the adsorbed layers. Solution properties of C12SO3Na/DM mixtures were also studied to identify surfactant interactions that affect the mixed aggregate formation in solution. Adsorption of SDS on gypsum and limestone suggested stronger surfactant/mineral interaction than on alumina, due to the precipitation of surfactant by dissolved calcium ions. The effects of different salts such as sodium nitrate, sodium sulfite and sodium chloride on DM adsorption on alumina have also been determined. As surfactant hemimicelles at interface and micelles in solution have drastic effects on oil recovery processes, their microstructures in solutions and at mineral

  8. Mineral-Surfactant Interactions for Minimum Reagents Precipitation and Adsorption for Improved Oil Recovery

    Energy Technology Data Exchange (ETDEWEB)

    P. Somasundaran

    2008-09-20

    Chemical EOR can be an effective method for increasing oil recovery and reducing the amount of produced water; however, reservoir fluids are chemically complex and may react adversely to the polymers and surfactants injected into the reservoir. While a major goal is to alter rock wettability and interfacial tension between oil and water, rock-fluid and fluid-fluid interactions must be understood and controlled to minimize reagent loss, maximize recovery and mitigate costly failures. The overall objective of this project was to elucidate the mechanisms of interactions between polymers/surfactants and the mineral surfaces responsible for determining the chemical loss due to adsorption and precipitation in EOR processes. The role of dissolved inorganic species that are dependent on the mineralogy is investigated with respect to their effects on adsorption. Adsorption, wettability and interfacial tension are studied with the aim to control chemical losses, the ultimate goal being to devise schemes to develop guidelines for surfactant and polymer selection in EOR. The adsorption behavior of mixed polymer/surfactant and surfactant/surfactant systems on typical reservoir minerals (quartz, alumina, calcite, dolomite, kaolinite, gypsum, pyrite, etc.) was correlated to their molecular structures, intermolecular interactions and the solution conditions such as pH and/or salinity. Predictive models as well as general guidelines for the use of polymer/surfactant surfactant/surfactant system in EOR have been developed The following tasks have been completed under the scope of the project: (1) Mineral characterization, in terms of SEM, BET, size, surface charge, and point zero charge. (2) Study of the interactions among typical reservoir minerals (quartz, alumina, calcite, dolomite, kaolinite, gypsum, pyrite, etc.) and surfactants and/or polymers in terms of adsorption properties that include both macroscopic (adsorption density, wettability) and microscopic (orientation

  9. ELISA试剂检测抗HCV反应性结果分析%Result analysis on anti-HCV reaction determination by ELISA reagents

    Institute of Scientific and Technical Information of China (English)

    傅立强; 桑列勇; 蒋国瑾

    2012-01-01

    Objective To evaluate the efficiency of imported anti-hepatitis C virus ( HCV) enzyme-linked immunosorbent assay ( ELISA) reagent in blood screening test and analyze the correlations among imported ELISA reagent, domestic ELISA reagent and recombinant immunoblot assay(RIBA). Methods A total of 56 anti-HCV positive specimens tested by imported ELISA reagent were retested by 2 domestic ELISA reagents, and the confirmatory test RIBA was also carried out. Results Among 56 positive specimens with imported anti-HCV ELISA reagent, the confirmatory test RIBA showed that the 12 specimens were confirmed to be positive ,18 specimens were indeterminate and 26 specimens were negative. Of the 9 specimens which were positive with 3 ELISA reagents, 7 specimens were confirmed to be positive, 1 specimen was indeterminate and 1 specimen was negative. Conclusions The false positivity with anti-HCV ELISA reagent is obvious, and there would be some different results with different anti-HCV ELISA reagents. For ensuring the blood safety, the imported ELISA reagent and the domestic ELISA reagent shpuld be used simultaneously in anti-HCV screening test.%目的 探讨丙型肝炎病毒抗体(抗HCV)进口酶联免疫吸附试验(ELISA)试剂在血液筛查中的效果及与国产试剂、重组免疫印迹试验(RIBA)确证检测的相关性.方法 用RIBA确证试剂及国内销量前2名的国产抗HCV ELISA试剂对56例进口抗HCV ELISA试剂检测呈反应性的标本进行检测分析.结果 56例标本经RIBA确证结果为阳性12例,不确定18例,阴性26例.3种试剂均为反应性的9例标本中,确证阳性7例,不确定1例,阴性1例.结论 目前市售的丙型肝炎ELISA试剂均存在较大的生物学假阳性,不同试剂间检测结果仍存在一定差异.为确保输血安全,建议有条件的采供血机构实验室抗HCV检测时以国产和进口试剂联合检测为佳.

  10. Sorodiagnóstico da doença de Chagas: novo reagente para o teste de hemaglutinação indireta (THAI IAL

    Directory of Open Access Journals (Sweden)

    Álvaro Toshiaki Sasaki

    1996-04-01

    Full Text Available Reagente novo destinado ao teste de hemaglutinação indireta, THAI IAL, foi padronizado, utilizando hemácias de ganso, como suporte inerte, para o diagnóstico de campo da tripanosomíase americana. O objetivo foi o de substituir o reagente liofilizado ou congelado de THAI produzido rotineiramente, empregando hemácias humanas, no Instituto Adolfo Lutz (São Paulo, Brasil. O reagente padronizado apresentou longa estabilidade em suspensão líquida, e foi avaliado em 137 amostras de soros de pacientes chagásicos e não chagásicos, em THAL IAl. O desempenho diagnóstico deste teste foi semelhante ao de THAI utilizando hemácias humanas e ao de THAl de procedência comercial. A sensibilidade foi 1,00, especificidade 0,98, valores de preditivo positivo 0,96, e negativo 1,00. As diferentes partidas de reagente sucessivamente produzidas demonstraram ser reprodutíveis em método de controle de qualidade. O novo reagente é mais econômico que o anterior, de fácil preparo e aplicável aos estudos soroepidemiológicos.A new reagent was designed to the indirect hemagglutination test (IHAT IAL, utilizing goose red blood cells as inert matrix and standardized for the field diagnosis of American trypanosomiasis. The objective was to substitute the tyophilized or frozen reagent of IHAT produced routinely using human erythrocytes in the Adolfo Lutz Institute (São Paulo/Brazil. The standardized reagent presented a long stability in liquid suspension, and was evaluated in 137 serum samples from patient with and without Chagas disease, by IHAT ILA. The diagnostic performance of this lest was similar to the IHAT utilizing human erythrocytes and to that of a commercial IHA Tkit. The sensitivity was 1.00, specificity 0.98, predictive value of positive 0.96 and of negative 1.00. Different batches of reagent successively produced proved to be reproducible in a quality control method. The new reagent is more economic than the former reagent, it can be produced

  11. A Simple and Highly Efficient Preparation of Structurally Diverse Aryl β-diketoacids as HIV-1 Integrase Inhibitors

    Institute of Scientific and Technical Information of China (English)

    JIANG Xiao-Hua姜晓华; LONG Ya-Qiu龙亚秋

    2004-01-01

    In order to provide a facile and practical access to structurally diverse aryl β-diketoacids, An improved and highly efficient oxalylation method was developed which employed commercially available and cheap reagents.The oxalylation of aryl methyl ketones, the key step to construct the pharmacophore of aryl β-diketoacids, was considerably facilitated by a new combination of dimethyl oxalate as an oxalic source and sodium tert-butoxide as a base. A wide variety of aryl β-diketoacids bearing different functional groups can be prepared rapidly in high yields at room t. emperature with this method, which has significant advantages over the previously reported procedures in a wider application range, much less amount of reagents, pretty higher yields and quite shorter reaction time. The bis-aryldiketoacids 3k and 31, readily prepared by this method, displayed interesting and promising inhibitory activities against HIV-1 integrase and HIV-1 replication in cells.

  12. Mapping of contact sites in complex formation between light-activated rhodopsin and transducin by covalent crosslinking: Use of a chemically preactivated reagent

    OpenAIRE

    ITOH, Yoshiki; Cai, Kewen; Khorana, H. Gobind

    2001-01-01

    Contact sites in interaction between light-activated rhodopsin and transducin (T) have been investigated by using a chemically preactivated crosslinking reagent, N-succinimidyl 3-(2-pyridyldithio)propionate. The 3 propionyl-N-succinimidyl group in the reagent was attached by a disulfide exchange reaction to rhodopsin mutants containing single reactive cysteine groups in the cytoplasmic loops. Complex formation between the derivatized rhodopsin mutants and T was ...

  13. Spectrofluorimetric determination of fluoroquinolones in pharmaceutical preparations

    Science.gov (United States)

    Ulu, Sevgi Tatar

    2009-02-01

    Simple, rapid and highly sensitive spectrofluorimetric method is presented for the determination of four fluoroquinolone (FQ) drugs, ciprofloxacin, enoxacin, norfloxacin and moxifloxacin in pharmaceutical preparations. Proposed method is based on the derivatization of FQ with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in borate buffer of pH 9.0 to yield a yellow product. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 23.5-500 ng mL -1 for ciprofloxacin, 28.5-700 ng mL -1 for enoxacin, 29.5-800 ng mL -1 for norfloxacin and 33.5-1000 ng mL -1 for moxifloxacin using NBD-Cl reagent, respectively. The detection limits were found to be 7.0 ng mL -1 for ciprofloxacin, 8.5 ng mL -1 for enoxacin, 9.2 ng mL -1 for norfloxacin and 9.98 ng mL -1 for moxifloxacin, respectively. Intra-day and inter-day relative standard deviation and relative mean error values at three different concentrations were determined. The low relative standard deviation values indicate good precision and high recovery values indicate accuracy of the proposed methods. The method is highly sensitive and specific. The results obtained are in good agreement with those obtained by the official and reference method. The results presented in this report show that the applied spectrofluorimetric method is acceptable for the determination of the four FQ in the pharmaceutical preparations. Common excipients used as additives in pharmaceutical preparations do not interfere with the proposed method.

  14. Preparation and Characterization of Collagen-GAGs Bioactive Matrices for Tissue Engineering

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Collagen materials were crosslinked by 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) in the presence of chondroitin sulfate (CS), one of glycosaminoglycans (GAGs). PVA and chitosan were also blended with collagen. The physical and chemical properties of the matrices were characterized by SEM, DSC, and ESCA. L929 cells were implanted on the matrices to show the cytotoxic and the biological characters of the materials. The results indicate that EDC is an effective and non-cytotoxic cross-link reagent, which can replace the common dialdehyde reagent. The attachment of CS can improve the stability of collagen and accelerate cell growth.The addition of PVA can prepare porous matrices with smaller bore size. There are reactions between the chitosan and collagen, and the composite has good biological character. The presence of chitosan can also increase the amount of incorporated CS.

  15. Transparent tooth model: A study of root canal morphology using different reagents

    Directory of Open Access Journals (Sweden)

    Bhavana Gupta

    2014-01-01

    Full Text Available Background: The complexity of root canal morphology has fascinated the imaginations of many. Several techniques have been tried in the past to view the three-dimensional anatomy of the pulp canal system with varied success. It has been hypothesized in the present study that a combination of decalcifying agent and clearing agent can be used to prepare transparent tooth model. Aims: The aim of the present study was to access the efficacy of two decalcifying agent (formic acid and nitric acid and two clearing agents (methyl salicylate and eugenol to prepare transparent tooth model. Materials and Methods: The study material included 80 freshly extracted teeth both maxillary and mandibular. After decalcifying and clearing of the specimen, they were graded for transparency and haziness criteria. Results: The results of the present study indicated that methyl salicylate when used as a clearing agent showed better transparency, lower level of haziness and good root canal morphology. On the other hand samples cleared by eugenol showed good root canal morphology but lesser transparency and higher degree of haziness and yellowing of samples, more so when used in combination with nitric acid. Conclusion: It was concluded by the present study that combination of nitric acid when used with methyl salicylate proved to be the best combination for the preparation of the transparent tooth model.

  16. Preparation of PbSe nanoparticles by electron beam irradiation method

    Indian Academy of Sciences (India)

    Zhen Li; Chao Wu; Yanyan Liu; Tiebing Liu; Zheng Jiao; Minghong Wu

    2008-11-01

    A novel method has been developed by electron beam irradiation to prepare PbSe nanoparticles. 2 MeV 10mA GJ-2-II electronic accelerator was used as radiation source. Nanocrystalline PbSe was prepared rapidly at room temperature under atmospheric pressure without any kind of toxic reagents. The structure and morphology of prepared PbSe nanoparticles were analysed by X-ray diffraction, transmission electron microscope and atomic force microscope. The results indicated that the obtained materials were cubic nanocrystalline PbSe with an average grain size of 30 nm. The optical properties of prepared PbSe nanocrystalline were characterized by using photoluminescence spectroscopy. The possible mechanism of the PbSe grain growth by electron beam irradiation method is proposed.

  17. International perspectives on coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The report consists of the vugraphs from the presentations which covered the following topics: Summaries of the US Department of Energy`s coal preparation research programs; Preparation trends in Russia; South African coal preparation developments; Trends in hard coal preparation in Germany; Application of coal preparation technology to oil sands extraction; Developments in coal preparation in China; and Coal preparation in Australia.

  18. Preparation and Use of Aziridino Alcohols as Promoters for the Enantioselective Addition of Dialkylzinc Reagents to N-(Diphenylphosphinoyl) IminesImines

    DEFF Research Database (Denmark)

    Tanner, David Ackland; Guijarro, David; Andersson, Pher G.

    1997-01-01

    A set of chiral aziridino alcohols has been synthesised, either from amino acids (serine, threonine or allo-threonine) or via Sharpless asymmetric aminohydroxylation/dihydroxylation of simple prochiral olefins. The ligands mediate the addition of diethylzinc to N-phosphinoylimines, with up to 94...

  19. Preparation of Ionic Liquid-based Vilsmier Reagent from Novel Multi-purpose Dimethyl Formamide-like Ionic Liquid and Its Application

    Institute of Scientific and Technical Information of China (English)

    Hullio, Ahmed Ali; Mastoi, G. M.

    2012-01-01

    In continuation of research to explore the applied potential of DMF-like ionic liquid, the ionic liquid version of N,N-dimethyliminiumchloride (Vilsmier reagent) has been synthesized from DMF-like ionic liquid and tested effectively for its capacity to achieve more useful organic transformations. The results show that DMF-like ionic liquid is world's first task specific ionic liquid which has catalyzed numerous diverse type of reaction and is multipurpose in its application. Thus a new term for this DMF-like ionic liquid has been coined that is DMF-like "multipurpose" ionic liquid.

  20. Recuperação de compostos de iodo de reagentes e soluções laboratoriais

    Directory of Open Access Journals (Sweden)

    Vanessa da Matta dos Santos

    2012-01-01

    Full Text Available This work presents simple routes to recover iodine compounds from oxidized laboratory chemicals and aqueous solutions (HI and KI used in laboratory chemistry classes. These routes are based on the oxidation of iodide ions (I- to iodine (I2 by an oxidant (H2O2 or reduction of oxidized iodine by red phosphorus or hydrazine. Both routes presented high yields. The oxidative route is of general use whereas the reductive one is appropriate for restoring original iodine reagents. Final wastes were generated in low amounts. This work is appropriate for teaching many laboratory techniques (e.g., distillation, titration and filtration in the chemical laboratory.

  1. Evaluation of reagent strips for ascitic fluid leukocyte determination: is it a possible alternative for spontaneous bacterial peritonitis rapid diagnosis?

    OpenAIRE

    Tarsila C.R. Ribeiro; Mario Kondo; Ana Cristina C. Amaral; Edson Roberto Parise; Maurício A. Bragagnolo Júnior; Aécio Flávio Meirelles de Souza

    2007-01-01

    In order to evaluate the accuracy of a urine reagent dipstick (Multistix 10SG®) to determine ascitic fluid leukocyte count, we prospectively studied 106 cirrhotic patients from April 2003 to December 2004, in two different centers (Federal University of São Paulo - UNIFESP-EPM and Federal University of Juiz de Fora - HU-UFJF) for the rapid bedside diagnosis of spontaneous bacterial peritonitis. The mean age 54 ± 12 years, there was a predominance of males (eighty-two patients, 77%), an...

  2. Development of a technology for obtaining flotation reagent oxane-3 for carbon mineral raw materials of Kazakhstan

    Directory of Open Access Journals (Sweden)

    Sergey Kalugin

    2014-12-01

    Full Text Available The paper represents the results of development of a technology for obtaining oxane-3 and its application for enrichment of carbon mineral raw materials. Studies on enrichment of a shungite rock showed that the increase of a pulp temperature to 30°C significantly improves the characteristics and rate of the flotation process. Measured indicators of a shungite rock enrichment using Flotol B were lower in comparison with an enrichment by oxane-3. For schungite mineral, it was established that the obtained heterocyclic compound can replace existing industrial flotation reagents in enrichment processes.

  3. A self-contained polymeric cartridge for automated biological sample preparation.

    Science.gov (United States)

    Xu, Guolin; Lee, Daniel Yoke San; Xie, Hong; Chiew, Deon; Hsieh, Tseng-Ming; Ali, Emril Mohamed; Lun Looi, Xing; Li, Mo-Huang; Ying, Jackie Y

    2011-09-01

    Sample preparation is one of the most crucial processes for nucleic acids based disease diagnosis. Several steps are required for nucleic acids extraction, impurity washes, and DNA/RNA elution. Careful sample preparation is vital to the obtaining of reliable diagnosis, especially with low copies of pathogens and cells. This paper describes a low-cost, disposable lab cartridge for automatic sample preparation, which is capable of handling flexible sample volumes of 10 μl to 1 ml. This plastic cartridge contains all the necessary reagents for pathogen and cell lysis, DNA/RNA extraction, impurity washes, DNA/RNA elution and waste processing in a completely sealed cartridge. The entire sample preparation processes are automatically conducted within the cartridge on a desktop unit using a pneumatic fluid manipulation approach. Reagents transportation is achieved with a combination of push and pull forces (with compressed air and vacuum, respectively), which are connected to the pneumatic inlets at the bottom of the cartridge. These pneumatic forces are regulated by pinch valve manifold and two pneumatic syringe pumps within the desktop unit. The performance of this pneumatic reagent delivery method was examined. We have demonstrated the capability of the on-cartridge RNA extraction and cancer-specific gene amplification from 10 copies of MCF-7 breast cancer cells. The on-cartridge DNA recovery efficiency was 54-63%, which was comparable to or better than the conventional manual approach using silica spin column. The lab cartridge would be suitable for integration with lab-chip real-time polymerase chain reaction devices in providing a portable system for decentralized disease diagnosis. PMID:22662036

  4. A New Achiral Linker Reagent for the Incorporation of Multiple Amino Groups Into Oligonucleotides

    DEFF Research Database (Denmark)

    1997-01-01

    with the linker in conventional phosphoamidite or H-phosphonate DNA syntheses. Directly, or via a post modification step, an oligonucleotide is labelled with one or more reporter moieties, e.g. dansyl (5-dimethylamino)-1-naphthalenesulfonyl), biotin, digoxigenin, DOXYL (N-oxyl-4,4-dimethyloxazolidine), PROXYL (N......, to a method for preparing a labelled oligonucleotide, and to the use of the labelled oligonucleotide as hybridisation probe, in polymerase chain reactions (PCR), in nucleic acid sequencing, in cloning recombinant DNA and $i(in vitro) mutagenesis....

  5. Spectrophotometric determination of phenylpropanolamine in dosage forms using dimethylaminobenzaldehyde as a derivatizing reagent

    International Nuclear Information System (INIS)

    Phenylpropanolamine (PPA) was extracted from slightly alkaline medium in chloroform, derivatized with dimethylaminobenzaldehyde (DAB) and determined by spectrophotometry at 377 nm. Beer's law was obeyed for 4.5-13.5 mu g. After the extraction of PPA in organic phase, paracetamole remaining in the aqueous phase could also be determined by spectrophotometry at 291 nm. The method was applied for the determination of PPA and paracetamole in the pharmaceutical preparations. Tavagyl-D, sinulab and Panadol labels with RSD within 0.4-0.8%. (author)

  6. Electrochemical preparation of solid ferrates(VI

    Directory of Open Access Journals (Sweden)

    Nikolić-Bujanović Ljiljana N.

    2012-01-01

    Full Text Available The electrochemical methodologies for synthesis of BaFeO4 and Ag2FeO4 are presented in this article. The first step was to prepare a solution of the K2FeO4 as starting reagent by anodic dissolution in the transpassive potential region of the electrical steel in 10M KOH. The current density applied was fixed at 20 mA/cm2 at 55°C. Solid BaFeO4 and Ag2FeO4 were precipitated from K2FeO4 solution by the addition of Ba(OH2 8H2O and AgNO3 solutions, respectively. The yield of solid salt synthesized was calculated by the hromitne titration, while their phase composition was determined by XRD analysis. Significant decomposition for BaFeO4 stored in dry conditions was not observed. Solid phase synthesized Ag2FeO4 is less stable than BaFeO4 due to its high sensitivity to light and susceptibility in such conditions to degradation to Ag2O, and AgO.

  7. Preparation and crystallization control of nanoparticle hydroxyapatite

    Institute of Scientific and Technical Information of China (English)

    Lianfeng Guo; Wenguang Zhang; Chengtao Wang

    2004-01-01

    Nanoparticle hydroxyapatite was prepared by a wet chemical precipitation method. The effects of different synthesis conditions, I.e. Contents of reagents (0.2, 0.5 and 0.8 mol/L), reaction temperatures (20, 37, 55 and 75℃) and reaction time (0-24 h),were studied based on crystallization process analysis and the effects of washing methods (with water or alcohol) were also studied.Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), electron diffraction (ED) and inductively coupled plasma spectroscopy (ICP) were used to characterize the powders. Chemical analysis shows that the purity of the precipitated hydroxyapatite largely depends on reaction time. X-ray diffraction and TEM micrographs results show that reaction temperature is a key factor affecting crystallinity, morphology and particle size. Degree of supersaturation and stirring also affects the crystallization. Particles are in a shape of short rod and have a size of 20-40 nm in length at 20℃ and 37℃,but acicular morphology and a size of 150-170 nm in length at 75C. Particles are monocrystalline at 20℃ and 37℃, and are polycrystalline at 55℃ and 75℃. The results show that stoichiometry hydroxyapatite with controlled particle size, morphology and crystallinity can be obtained by carefully controlling the reaction conditions.

  8. Materials Preparation Center

    Data.gov (United States)

    Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

  9. Fenton reagent and titanium dioxide nanoparticles as antifungal agents to control leaf spot of sugar beet under field conditions

    Directory of Open Access Journals (Sweden)

    Hamza Amany

    2016-07-01

    Full Text Available In this study, foliar sprays of Fenton solutions (Fenton reaction, Fenton-like reaction and Fenton complex, titanium dioxide (TiO2 and the recommended fungicide (chlorothalonil were estimated in the control of sugar beet leaf spot caused by Cercospora beticola under field conditions in two growing seasons. In addition, the impacts of these treatments on some crop characters (leaf dry weight, root fresh weight, soluble solid content, sucrose content and purity of sugar were examined. Biochemical and histological changes in the livers and kidneys of treated rats compared to an untreated control were utilized to assess the toxicity of the examined curative agents. Overall, chlorothalonil and Fenton complex were the most effective treatments for disease suppression in both tested seasons followed by Fenton-like reagent, Fenton’s reagent and TiO2, respectively. Growth and yield characters of treated sugar beet significantly increased in comparison to an untreated control. There were mild or no (biochemical and histological changes in the livers and kidneys of treated rats compared to the control. Fenton solutions and TiO2 may offer a new alternative for leaf spot control in sugar beet.

  10. Oxidation of Levafix CA reactive azo-dyes in industrial wastewater of textile dyeing by electro-generated Fenton's reagent.

    Science.gov (United States)

    El-Desoky, Hanaa S; Ghoneim, Mohamed M; El-Sheikh, Ragaa; Zidan, Naglaa M

    2010-03-15

    The indirect electrochemical removal of pollutants from effluents has become an attractive method in recent years. Removal (decolorization and mineralization) of Levafix Blue CA and Levafix Red CA reactive azo-dyes from aqueous media by electro-generated Fenton's reagent (Fe(2+)/H(2)O(2)) using a reticulated vitreous carbon cathode and a platinum gauze anode was optimized. Progress of oxidation (decolorization and mineralization) of the investigated azo-dyes with time of electro-Fenton's reaction was monitored by UV-visible absorbance measurements, Chemical oxygen demand (COD) removal and HPLC analysis. The results indicated that the electro-Fenton's oxidation system is efficient for treatment of such types of reactive dyes. Oxidation of each of the investigated azo-dyes by electro-generated Fenton's reagent up to complete decolorization and approximately 90-95% mineralization was achieved. Moreover, the optimized electro-Fenton's oxidation was successfully applied for complete decolorization and approximately 85-90% mineralization of both azo-dyes in real industrial wastewater samples collected from textile dyeing house at El-Mahalla El-Kobra, Egypt.

  11. An organic-reagent-free method for determination of chromium(VI) in steel alloys, sewage sludge and wastewater.

    Science.gov (United States)

    Fan, Jing; Sun, Yuping; Wang, Jianji; Fan, Maohong

    2009-04-27

    One of the active areas of green chemistry research and development is in the development of new analytical methods and techniques that reduce and eliminate the use and generation of hazardous substances. In this work, a rapid and organic-reagent-free method was developed for the determination of chromium(VI) by sequential injection analysis (SIA). The method was based on the detection of a blue unstable intermediate compound resulting from the reaction of Cr(VI) with hydrogen peroxide (H(2)O(2)) in acidic medium. H(2)O(2) and its reaction products were environmentally friendly, and chromogenic reagents and organic solvents were not used in the proposed method. Different SIA parameters have been optimized and used to obtain the analytical figures of merit. Under the optimum experimental conditions, the linear range for Cr(VI) was 0.5-100.0 microg mL(-1), and the detection limit was 0.16 microg mL(-1). The sample throughput was 80 h(-1), and the total volume of only 145 microL was consumed in each determination of Cr(VI). The method was applied for the determination of Cr(VI) in seven real samples, including alloy steel, sewage sludge and wastewater samples, and the results were compared with those obtained by atomic absorption spectrometry as well as with the certified value of Cr(VI) in standard reference material. Statistical analysis revealed that there was no significant difference at 95% confidence level. PMID:19362620

  12. Fuzzy logic sensing of G-quadruplex DNA and its cleavage reagents based on reduced graphene oxide.

    Science.gov (United States)

    Huang, Wei Tao; Zhang, Jian Rong; Xie, Wan Yi; Shi, Yan; Luo, Hong Qun; Li, Nian Bing

    2014-07-15

    Herein, by combining the merits of nanotechnology and fuzzy logic theory, we develop a simple, label-free, and general strategy based on an organic dye-graphene hybrid system for fluorescence intelligent sensing of G-quadruplexes (G4) formation, hydroxyl radical (HO∙), and Fe(2+) in vitro. By exploiting acridine orange (AO) dyes-graphene as a nanofilter and nanoswitch and the ability of graphene to interact with DNA with different structures, our approach can efficiently distinguish, quantitatively detect target analytes. In vitro assays with G4DNA demonstrated increases in fluorescence intensity of the AO-rGO system with a linear range of 16-338 nM and a detection limit as low as 2.0 nM. The requenched fluorescence of the G4TBA-AO-rGO system has a non-linear response to Fenton reagent. But this requenching reduces the fluorescence intensity in a manner proportional to the logarithm to the base 10 of the concentration of Fenton reagent in the range of 0.1-100 μM and 100-2000 μM, respectively. Furthermore, we develop a novel and intelligent sensing method based on fuzzy logic which mimics human reasoning, solves complex and non-linear problems, and transforms the numerical output into the language description output for potential application in biochemical systems, environmental monitoring systems, and molecular-level fuzzy logic computing system.

  13. Selective Determination of tetrabromobisphenol A by liquid chromatography following intramolecular excimer-forming fluorescence derivatization with pyrene-labeling reagent

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, H.; Tsunetomo, S.; Todoroki, K.; Nohta, H.; Yamaguchi, M. [Fukuoka Univ. (Japan); Hayama, T. [Foundation for Kyushu Environmental and Occupational Health, Kurume (Japan); Kuroki, H. [Daiichi College of Pharmaceutical Sciences, Fukuoka (Japan)

    2004-09-15

    A large number of compounds have been used as flame-retardants to protect different products from catching fire, and one of the most widely used flameretardants is tetrabromobisphenol A (TBBPA). Trace amounts of TBBPA have been determined by gas chromatography (GC) with electron-capture detection or GC-mass spectrometry (MS) as reviewed in. Only a few liquid chromatographic (LC) methods have been reported. Recently, we developed highly selective and sensitive determination methods for polyamines and dicarboxylic acids based on intramolecular excimer-forming fluorescence derivatization using pyrene reagents. By the derivatization, the resulting polypyrene-labeled derivatives of polyamines and dicarboxylic acids provided intramolecular excimer fluorescence at the wavelength region of 440 - 520 nm, which was shifted markedly to the higher emission wavelengths as compared to the wavelengths of the pyrene reagent itself and monopyrene-labeled concomitants (360 - 420 nm). This chemistry allowed to selectively analyzing poly-functional compounds even in the complex samples containing monofunctional compounds. More recently, we have found that 4-(1-pyrene)butanoyl chloride (PBC) reacts with not only polyamines, but also phenol compounds such as bisphenols, and the obtained PBC derivatives form strong intramolecular excimers. The aim of this work was to develop an intramolecular excimer-forming derivatization method for fluorimetric determination of halogenated-bisphenols including TBBPA following their derivatization with PBC. The new method allows a highly sensitive and selective determination of tetrabromobisphenol A.

  14. Enhancing Protein Capture Using a Combination of Nanoyeast Single-Chain Fragment Affinity Reagents and Alternating Current Electrohydrodynamic Forces.

    Science.gov (United States)

    Vaidyanathan, Ramanathan; Rauf, Sakandar; Grewal, Yadveer S; Spadafora, Lauren J; Shiddiky, Muhammad J A; Cangelosi, Gerard A; Trau, Matt

    2015-12-01

    New high-performance detection technologies and more robust protein capture agents can be combined to both rapidly and specifically capture and detect protein biomarkers associated with disease in complex biological samples. Here we demonstrate the use of recently developed recombinant affinity reagents, namely nanoyeast-scFv, in combination with alternating current electrohydrodynamic (ac-EHD)-induced shear forces, to enhance capture performance during protein biomarker analysis. The use of ac-EHD significantly improves fluid transport across the capture domain, resulting in enhanced sensor-target interaction and simultaneous displacement of nonspecific molecules from the electrode surface. We demonstrate this simple proof-of-concept approach for the capture and detection of Entamoeba histolytica antigens from disinfected stool, within a span of 5 min using an ac-EHD microfluidic device. Under an ac-EHD field, antigens were captured on a nanoyeast-scFv immobilized device and subsequently detected using a quantum dot conjugated antibody. This immunosensor specifically detected antigen in disinfected stool with low background noise at concentrations down to 58.8 fM with an interassay reproducibility (%RSD of n = 3) gold electrodes in disinfected stool. We predict this rapid and sensitive approach using these stable affinity reagents may offer a new methodology to detect protein disease biomarkers from biological matrices. PMID:26551436

  15. A sulfhydryl-reactive ruthenium (II complex and its conjugation to protein G as a universal reagent for fluorescent immunoassays.

    Directory of Open Access Journals (Sweden)

    Jing-Tang Lin

    Full Text Available To develop a fluorescent ruthenium complex for biosensing, we synthesized a novel sulfhydryl-reactive compound, 4-bromophenanthroline bis-2,2'-dipyridine Ruthenium bis (hexafluorophosphate. The synthesized Ru(II complex was crosslinked with thiol-modified protein G to form a universal reagent for fluorescent immunoassays. The resulting Ru(II-protein G conjugates were identified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE. The emission peak wavelength of the Ru(II-protein G conjugate was 602 nm at the excitation of 452 nm which is similar to the spectra of the Ru(II complex, indicating that Ru(II-protein G conjugates still remain the same fluorescence after conjugation. To test the usefulness of the conjugate for biosensing, immunoglobulin G (IgG binding assay was conducted. The result showed that Ru(II-protein G conjugates were capable of binding IgG and the more cross-linkers to modify protein G, the higher conjugation efficiency. To demonstrate the feasibility of Ru(II-protein G conjugates for fluorescent immunoassays, the detection of recombinant histidine-tagged protein using the conjugates and anti-histidine antibody was developed. The results showed that the histidine-tagged protein was successfully detected with dose-response, indicating that Ru(II-protein G conjugate is a useful universal fluorescent reagent for quantitative immunoassays.

  16. Measurement of Estradiol in Human Serum by LC-MS/MS Using a Novel Estrogen-Specific Derivatization Reagent.

    Science.gov (United States)

    Keski-Rahkonen, Pekka; Desai, Reena; Jimenez, Mark; Harwood, D Tim; Handelsman, David J

    2015-07-21

    A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method is described that employs a novel derivatization reagent for the measurement of serum estradiol (E2), with simultaneous analysis of underivatized testosterone (T) and dihydrotestosterone (DHT). The main advantage of the new derivatization reagent 1,2-dimethylimidazole-5-sulfonyl chloride is its analyte-specific fragmentation that enables monitoring of confirmatory mass transitions with high sensitivity. The reaction mixture can be analyzed without additional purification steps using a 9.5 min gradient run, and sensitive detection is achieved with a triple quadrupole mass spectrometer using atmospheric pressure photoionization. Method validation was performed with human serum samples, including a comparison with a standard LC-MS/MS method using 120 samples from a clinical study, and analysis of certified E2 serum reference materials BCR-576, BCR-577, and BCR-578. The lower limits of quantification for E2, T, and DHT were 0.5 pg/mL, 25 pg/mL, and 0.10 ng/mL, respectively, from a 200-μL sample. Validation results indicated good accuracy and agreement with established, conventional LC-MS/MS assays, demonstrating suitability for analysis of samples containing E2 in the low pg/mL range, such as serum from men, children, and postmenopausal women.

  17. A Novel Analytical Method for Trace Ammonium in Freshwater and Seawater Using 4-Methoxyphthalaldehyde as Fluorescent Reagent

    Directory of Open Access Journals (Sweden)

    Ying Liang

    2015-01-01

    Full Text Available A novel fluorescent reagent for determination of ammonium, 4-methoxyphthalaldehyde (MOPA, was successfully synthesized in this study. Under alkaline conditions, MOPA could reacted with ammonium rapidly at room temperature, producing fluorescent substance which had maximum excitation at 370 nm and emission wavelength at 454 nm. Based on this, a novel fluorescence analysis method was established for the determination of trace ammonium in natural water. Experimental parameters including reagent concentration, pH, reaction equilibrium time, and metal ions masking agent were optimized. The results showed that the optimized MOPA concentration was 0.12 g/L, pH was in the range of 11.2–12.0, and sulfite concentration was 0.051 g/L, respectively. Metal ions masking agent had no obvious effect on the fluorescence signal. With the reaction time of 15 minutes, linear range of this method was between 0.025 and 0.300 μmol/L, and the method detecting limit was 0.0058 μmol/L. The matrix recovery of the proposed method was in the range of 93.6–108.1%. Compared with the OPA method, this method was much more sensitive and rapid without the interference of background peak and would be more suitable for developing a portable fluorescence detection system.

  18. 3'-O-(5-fluoro-2,4-dinitrophenyl)ADP ether and ATP ether. Affinity reagents for labeling ATPases.

    Science.gov (United States)

    Chuan, H; Wang, J H

    1988-09-15

    The affinity reagents 3'-O-(5-fluoro-2,4-dinitrophenyl)ADP ether (FDNP-ADP) and 3'-O-(5-fluoro-2,4-dinitrophenyl)ATP ether (FDNP-ATP) were synthesized and characterized. FDNP[14C]ADP was found to label the active site of mitochondrial F1-ATPase slowly at room temperature but with high specificity. F1 was effectively protected from the labeling reagent by ATP or ADP. An average number of 1.3 covalent label per F1 is sufficient for 100% inhibition of the ATPase. About 73% of the radioactive label was found covalently attached to beta subunits, 9% on alpha, practically none on gamma, delta, and epsilon. Cleavage of the labeled enzyme by pepsin and sequencing of the major radioactive peptide showed that the labeled amino acid residue in beta subunit was Lys beta 162. These results show that Lys beta 162 is indeed at the active site of F1 as assumed in the recently proposed models (Fry, D. C., Kuby, S. A., and Mildvan, A. S. (1986) Proc. Natl. Acad. Sci. U. S. A. 83, 907-911; Duncan, I. M., Parsonage, D., and Senior, A. E. (1986) FEBS Lett. 208, 1-6).

  19. Removal of High Concentration Chromium by a Foam-separating Technique Using Casein Proteins as a Foaming Reagent

    Science.gov (United States)

    Sugimoto, Futoshi

    Foam separation of high concentration chromium in leather tanning wastewater was investigated using casein protein as a foaming reagent5mL of5w/v% ammonium acetate buffer was added to the sample chromium water. After adjusting the pH to 9.0,4g/L concentrations of casein and gelatin solution were added to recovery the coagulating flocs of chromium resulting foam separation. The sample water containing chromium flocs was incased in reactor, then mixed with distilled water and 1mL of ethanol to sum 200mL total. The foam separation was performed at time intervals of 3min with an air flow rate of 300mL/min. With casein reagent, the removal rate of chromium was not influenced by the presence of NaCl, however, the rate decreased tendency using with the use of gelatin. The proposed method, utilizing 4g/L of casein solution with water, was not influenced by the presence of calcium (<34mM), magnesium (<1mM), carbonate (<0.5mM), bicarbonate (<1.2mM) nor sulfate (<350mM) ions, and is ideal for foam separation in chromium concentrations of about 100mgCr/L.

  20. Expression and validation of D-erythrulose 1-phosphate dehydrogenase from Brucella abortus: a diagnostic reagent for bovine brucellosis.

    Science.gov (United States)

    Eoh, Hyungjin; Jeon, Bo-Young; Kim, Zhiyeol; Kim, Seung-Cheol; Cho, Sang-Nae

    2010-07-01

    Brucella abortus is a bacterium of brucellosis causing abortion in cattle. The diagnosis of bovine brucellosis mainly relies on serologic tests using smooth lipopolysaccharide (S-LPS) from B. abortus. However, the usefulness of this method is limited by false-positive reactions due to cross-reaction with other Gram-negative bacteria. In the present study, the eryC gene encoding B. abortus d-erythrulose 1-phosphate dehydrogenase, which is involved in the erythritol metabolism in virulent B. abortus strain but is absent from a B. abortus vaccine strain (S19), was cloned. Recombinant EryC was expressed and purified for the evaluation as a diagnostic reagent for bovine brucellosis. Other B. abortus proteins, Omp16, PP26, and CP39 were also purified and their seroreactivities were compared. Recombinant EryC, Omp16, PP26, and PP39 were all reactive to B. abortus-positive serum. The specificity of recombinant Omp16, PP26, CP39, and EryC, were shown to be approximately 98%, whereas that of B. abortus whole cell lysates was shown to be 95%. The sensitivity of Omp16, PP26, CP39, and EryC were 10%, 51%, 64%, and 43%, respectively, whereas that of B. abortus whole cell lysates was 53%. These results suggested that B. abortus EryC would be a potential reagent for diagnosis for bovine brucellosis as a single protein antigen. PMID:20622221