WorldWideScience

Sample records for aryl iodides convenient

  1. CuI-catalyzed Synthesis of Aryl Thiocyanates from Aryl Iodides

    Institute of Scientific and Technical Information of China (English)

    Ye Feng WANG; Yuan ZHOU; Jia Rui WANG; Lei LIU; Qing Xiang GUO

    2006-01-01

    An operationally simple and inexpensive catalyst system was developed for the cross coupling of potassium thiocyanate with aryl iodides by using CuI as catalyst, 1, 10-phenanthroline as ligand, and tetraethylammonium iodide as activator. The procedure is applicable for the synthesis of diverse aryl thiocyanates without any exotic, poisonous reagents.

  2. Nickel-catalyzed reductive arylation of activated alkynes with aryl iodides

    Science.gov (United States)

    Dorn, Stephanie C. M.; Olsen, Andrew K; Kelemen, Rachel E.; Shrestha, Ruja; Weix, Daniel J.

    2015-01-01

    The direct, regioselective, and stereoselective arylation of activated alkynes with aryl iodides using a nickel catalyst and manganese reductant is described. The reaction conditions are mild (40 °C in MeOH, no acid or base) and an intermediate organomanganese reagent is unlikely. Functional groups tolerated include halides and pseudohalides, free and protected anilines, and a benzyl alcohol. Other activated alkynes including an amide and a ketone also reacted to form arylated products in good yields. PMID:26028781

  3. Cu-catalyzed trifluoromethylation of aryl iodides with trifluoromethylzinc reagent prepared in situ from trifluoromethyl iodide

    OpenAIRE

    Yuzo Nakamura; Motohiro Fujiu; Tatsuya Murase; Yoshimitsu Itoh; Hiroki Serizawa; Kohsuke Aikawa; Koichi Mikami

    2013-01-01

    The trifluoromethylation of aryl iodides catalyzed by copper(I) salt with trifluoromethylzinc reagent prepared in situ from trifluoromethyl iodide and Zn dust was accomplished. The catalytic reactions proceeded under mild reaction conditions, providing the corresponding aromatic trifluoromethylated products in moderate to high yields. The advantage of this method is that additives such as metal fluoride (MF), which are indispensable to activate silyl groups for transmetallation in the corresp...

  4. Heck Arylation of Acrylonitrile with Aryl Iodides Catalyzed by a Silica-bound Arsine Palladium(0) Complex

    Institute of Scientific and Technical Information of China (English)

    Ming Zhong CAI; Hong ZHAO; Rong Li ZHANG

    2005-01-01

    Acrylonitrile reacts with aryl iodides in the presence of tri-n-butylamine and a catalytic amount of a silica-bound arsine palladium(0) complex to afford stereoselectively (E)-cinnamonitriles in high yields.

  5. A convenient catalyst system for microwave accelerated cross-coupling of a range of aryl boronic acids with aryl chlorides

    Directory of Open Access Journals (Sweden)

    Milton Edward J

    2007-05-01

    Full Text Available Abstract A convenient microwave accelerated cross-coupling procedure between aryl chlorides with a range of boronic acids has been developed. An explanation for the low reactivity of highly fluorinated boronic acids in Suzuki coupling is provided.

  6. Copper-catalysed N-arylation of arylsulfonamides with aryl bromides and aryl iodides using KF/Al2O3

    Indian Academy of Sciences (India)

    Rahman Hosseinzadeh; Mahmood Tajbakhsh; Maryam Mohadjerani; Mohammad Alikarami

    2010-03-01

    An efficient synthesis of -arylsulfonamides with a variety of aryl bromides, aryl iodides and heteroaryl bromides using KF/Al2O3 as a suitable base, CuI as an inexpensive catalyst and ,'-dimethylethylenediamine (,'-DMEDA) as an effective ligand is described.

  7. A Direct Transformation of Aryl Aldehydes to Benzyl Iodides Via Reductive Iodination

    Energy Technology Data Exchange (ETDEWEB)

    Ruso, Jayaraman Sembian; Rajendiran, Nagappan; Kumaran, Rajendran Senthil [Univ. of Madras, Chennai (India)

    2014-02-15

    A facile transformation of aryl aldehydes to benzyl iodides through one-pot reductive iodination is reported. This protocol displays remarkable functional group tolerance and the title compound was obtained in good to excellent yield.

  8. Cooperative effect of silver in copper-catalyzed trifluoromethylation of aryl iodides using Me3SiCF3

    KAUST Repository

    Weng, Zhiqiang

    2011-06-13

    An effective model of cooperative effect of silver for the coppercatalyzed trifluoromethylation of activated and unactivated aryl iodides to trifluoromethylated arenes using Me3SiCF3 was achieved with a broad substrate scope. © 2011 American Chemical Society.

  9. TBAHS CATALYZED COUPLING REACTIONS OF ARYL IODIDES AND ARYL BROMIDES WITH THIOLS UNDER SOLVENT FREE CONDITIONS TBAHS katalysierten Kupplungen von Aryliodiden und-Arylbromiden mit Thiolen unter lösungsmittelfreien freien Bedingungen

    Directory of Open Access Journals (Sweden)

    Gajendera Singha, Ajay kumarb , Sakshi Malikc, Preeti Chaudharyd

    2013-04-01

    Full Text Available A recyclable and efficient Tetrabutylammonium hydrogensulfate (TBAHS catalysed coupling reaction of aryl halides (iodide and bromide with aryl and alkyl thiols under solvent-free conditions were developed.

  10. Cu(OAc)2/Pyrimidines-Catalyzed Cross-coupling Reactions of Aryl Iodides and Activated Aryl Bromides with Alkynes under Aerobic, Solvent-free and Palladium-free Conditions

    Institute of Scientific and Technical Information of China (English)

    XIE Ye-Xiang; DENG Chen-Liang; PI Shao-Feng; LI Jin-Heng; YIN Du-Lin

    2006-01-01

    Excellent results have been achieved in the Cu(OAc)2-catalyzed Sonogashira cross-couplings of aryl iodides and activated aryl bromides utilizing TBAF (tetrabutylammonium fluoride) as the base and 4,6-dimethoxypyrimidin-2-amine as the ligand. It is noteworthy that the reaction is conducted under aerobic, solvent-free and palladium-free conditions.

  11. Nickel-catalyzed cross-coupling reactions of o-carboranyl with aryl iodides: facile synthesis of 1-aryl-o-carboranes and 1,2-diaryl-o-carboranes.

    Science.gov (United States)

    Tang, Cen; Xie, Zuowei

    2015-06-22

    A nickel-catalyzed arylation at the carbon center of o-carborane cages has been developed, thus leading to the preparation of a series of 1-aryl-o-carboranes and 1,2-diaryl-o-carboranes in high yields upon isolation. This method represents the first example of transition metal catalyzed C,C'-diarylation by cross-coupling reactions of o-carboranyl with aryl iodides. PMID:25959849

  12. A Convenient and Environmentally Benign Method of Reducing Aryl Ketones or Aldehydes by Zinc Powder in an Aqueous Alkaline Solution

    Institute of Scientific and Technical Information of China (English)

    ZHANG,Chao-Zhi; YANG,Hui; WU,De-Lin; LU,Guo-Yuan

    2007-01-01

    A convenient and environmentally benign method for reducing the carbonyl group in hydroxy- and amino-9,10-anthracenediones, ortho (or para) acyl phenols and acyl anilines to a methylene group by zinc powder in an aqueous sodium hydroxide solution was reported. Based on theoretical calculations using the density functional theory (DFT), the mechanism of these reduction reactions was postulated. This mechanism can be applied to help predicting the reduced products of aryl ketones (or aldehydes) in an alkaline solution.

  13. Pd-Catalyzed Coupling of γ-C(sp(3))-H Bonds of Oxalyl Amide-Protected Amino Acids with Heteroaryl and Aryl Iodides.

    Science.gov (United States)

    Han, Jian; Zheng, Yongxiang; Wang, Chao; Zhu, Yan; Huang, Zhi-Bin; Shi, Da-Qing; Zeng, Runsheng; Zhao, Yingsheng

    2016-07-01

    Pd-catalyzed regioselective coupling of γ-C(sp(3))-H bonds of oxalyl amide-protected amino acids with heteroaryl and aryl iodides is reported. A wide variety of iodides are tolerated, giving the corresponding products in moderate to good yields. Various oxalyl amide-protected amino acids were compatible in this C-H transformation, thus representing a practical method for constructing non-natural amino acid derivatives. PMID:27286881

  14. Cul-catalyzed Coupling Reactions of Aryl Iodides with Amides Using L-Proline and KF/Al2O3

    Institute of Scientific and Technical Information of China (English)

    HOSSEINZADEH Rahman; TAJBAKHSH Mahmood; MOHADJERANI Maryam; GHORBANI Elham

    2008-01-01

    An efficient experimentally simple and inexpensive catalyst system for the selective amidation of aryl iodides using 15 mol% of Cul as catalyst,15 mol% of L-proline as ligand and KF/Al2O3 as a base in toluene is described.

  15. 纳米氧化铜催化碘代芳烃的氨基化反应%Ligand-free copper(Ⅱ)-catalyzed amination of aryl iodides

    Institute of Scientific and Technical Information of China (English)

    吕良忠; 徐欢; 丁元华; 刘伟; 袁宇

    2012-01-01

    针对硝基化合物还原制备芳香胺中反应条件苛刻、适用范围较小、副产物较多、产品质量欠佳等缺陷,研究出一种以纳米氧化铜为催化剂、氨水为氨源且无配体参与的一步合成芳香伯胺的方法.该方法具有原料价廉、反应条件温和、对环境友好等优点,为芳香胺的合成增添了新的途径.%Reduction of nitro substituted aromatic compounds is the main method for preparation of aromatic amines in industry at present. However, the conventional synthetic methods often have relatively harsh reaction conditions, small scope of application, unavoidable by-products, poor selectivity, poor product quality and other shortcomings. This paper develops one step method of ligand-free nano copper oxide catalyzed amination reaction of aryl iodides with ammonia. Aqueous NH3 solution is a convenient and inexpensive source of ammonia. The synthesis method with mild conditions and environmental friendliness, has added a new method for synthesizing primary aromatic amines.

  16. Nickel-Catalyzed Methylation of Aryl Halides with Deuterated Methyl Iodide.

    Science.gov (United States)

    Hu, Lu; Liu, Xin; Liao, Xuebin

    2016-08-01

    A nickel-catalyzed methylation of aryl halides with cheap and readily available CH3 I or CD3 I is described. The reaction is applicable to a wide range of substrates and allows installation of a CD3 group under mild reaction conditions without deuterium scrambling to other carbon atoms. Initial mechanistic studies on the stoichiometric and catalytic reactions of the isolated [(dppp)Ni(C6 H4 -4-CO2 Et)Br] [dppp=1,3-bis(diphenylphosphanyl)propane] suggest that a Ni(0) /Ni(II) catalytic cycle is favored. PMID:27381725

  17. A convenient approach to an advanced intermediate toward the naturally occurring, bioactive 6-substituted 5-hydroxy-4-aryl-1H-quinolin-2-ones.

    Science.gov (United States)

    Simonetti, Sebastián O; Larghi, Enrique L; Kaufman, Teodoro S

    2016-03-01

    5-Hydroxy-4-aryl-3,4-dihydro-1H-quinolin-2-ones are a small family of natural products isolated from fungal strains of Penicillium and Aspergillus. Most of its members, which are insecticides and anthelmintics, carry an isoprenoid C-6 side chain. The synthesis of a 6-propenyl-substituted advanced intermediate for the total synthesis of these natural products is presented in this paper. This was achieved through the stereoselective construction of a β,β-diarylacrylate derivative from 6-nitrosalicylaldehyde, using a Wittig olefination and a Heck-Matsuda arylation, followed by a selective Fe(0)-mediated reductive cyclization. Installation of the 6-propenyl side chain was performed by 5-O-allylation of the heterocycle, followed by Claisen rearrangement and conjugative migration of the allyl double bond, as the key steps. The Grubbs II-catalyzed olefin cross metathesis of the 6-allyl moiety with 2-methylbut-2-ene to afford a precursor of peniprequinolone is also reported. PMID:26906496

  18. Synthesis of β-arylated alkylamides via Pd-catalyzed one-pot installation of a directing group and C(sp3)–H arylation

    Science.gov (United States)

    Zhang, Yi; Cao, Xiaoji; Wan, Jie-Ping

    2016-01-01

    Summary The synthesis of β-arylated alkylamides via alkyl C–H bond arylation has been realized by means of direct one-pot reactions of acyl chlorides, aryl iodides and 8-aminoquinoline. Depending on the structure of the starting materials, both single and double β-arylated alkylamides could be accessed. PMID:27340500

  19. Potassium Iodide

    Science.gov (United States)

    Potassium iodide is used to protect the thyroid gland from taking in radioactive iodine that may be ... damage the thyroid gland. You should only take potassium iodide if there is a nuclear radiation emergency ...

  20. Palladium-catalysed ortho arylation of acetanilides

    Indian Academy of Sciences (India)

    Guo-zhen zhang; Cheng-Qun Chen; Xin-Hua Feng; Guo-Sheng Huang

    2010-03-01

    The palladium-catalysed direct arylation of acetanilides by using C-H activation methodology has been demonstrated. Several acetanilides were coupled with aryl iodides in the presence of 10 mol% of Pd(OAc)2, 1.0 equiv of Cu(OTf)2, and 0.6 equiv of Ag2O to afford the corresponding products in moderate to excellent yields. The results showed that the amount of Ag2O was important for this protocol.

  1. One-pot, two-step, microwave-assisted palladium-catalyzed conversion of aryl alcohols to aryl fluorides via aryl nonaflates.

    Science.gov (United States)

    Wannberg, Johan; Wallinder, Charlotta; Ünlüsoy, Meltem; Sköld, Christian; Larhed, Mats

    2013-04-19

    A convenient procedure for converting aryl alcohols to aryl fluorides via aryl nonafluorobutylsulfonates (ArONf) is presented. Moderate to good one-pot, two-step yields were achieved by this nonaflation and microwave-assisted, palladium-catalyzed fluorination sequence. The reductive elimination step was investigated by DFT calculations to compare fluorination with chlorination, proving a larger thermodynamic driving force for the aryl fluoride product. Finally, a key aryl fluoride intermediate for the synthesis of a potent HCV NS3 protease inhibitor was smoothly prepared with the novel protocol.

  2. Palladium-catalyzed aryl amination-heck cyclization cascade: A one-flask approach to 3-substituted Indoles

    DEFF Research Database (Denmark)

    Jensen, Thomas; Pedersen, Henrik; Bang-Andersen, B.;

    2008-01-01

    Two for the price of one: A Pd/dppf-based catalyst provides access to the title compounds from 1,2-dihalogenated aromatic compounds and allylic amines in a single reaction flask. The initial aryl amination step occurs with excellent selectivity for the aryl iodide to ensure the formation of a sin...

  3. Modern Arylation Methods

    CERN Document Server

    Ackermann, Lutz

    2009-01-01

    Today, arylation methods are belonging to the most important reaction types in organic synthesis. Lutz Ackermann, a young and ambitious professor has gathered a number of top international authors to present the first comprehensive book on the topic. Starting from a historical review, the book covers hot topics like Palladium-catalyzed arylation of N-H and alpha-C-H-acidic Bonds, Copper-catalyzed arylation of N-H and O-H Bonds, direct arylation reactions, carbanion aromatic synthesis, arylation reactions of alkenes, alkynes and much more. This compact source of high quality information is indi

  4. Pricing a Convenience Food.

    Science.gov (United States)

    Gabor, Andre

    1980-01-01

    Discusses a study undertaken by the Nottingham University Consumer Study Group to determine market operation for popular convenience foods in England. Information is presented on distribution of purchases, brand loyalties of respondents to a questionnaire regarding convenience foods, and market fluctuation due to inflation. (Author/DB)

  5. Reframing convenience food.

    Science.gov (United States)

    Jackson, Peter; Viehoff, Valerie

    2016-03-01

    This paper provides a critical review of recent research on the consumption of 'convenience' food, highlighting the contested nature of the term and exploring its implications for public health and environmental sustainability. It distinguishes between convenience food in general and particular types of convenience food, such as ready-meals, tracing the structure and growth of the market for such foods with a particular emphasis on the UK which currently has the highest rate of ready-meal consumption in Europe. Having established the definitional complexities of the term, the paper presents the evidence from a systematic review of the literature, highlighting the significance of convenience food in time-saving and time-shifting, the importance of recent changes in domestic labour and family life, and the way the consumption of convenience food is frequently moralized. The paper shows how current debates about convenience food are part of a longer discursive history about food, health and nutrition. It discusses current levels of public understanding about the links between convenience food, environmental sustainability and food waste. The paper concludes by making a case for understanding the consumption of convenience food in terms of everyday social practices, emphasising its habitual and routine character. PMID:26678163

  6. Novel Synthesis and Anti-HIV-1 Activity of 2-Arylthio-6-benzyl-2,3-dihydro-1H-pyrimidin-4-ones (Aryl S-DABOs)

    DEFF Research Database (Denmark)

    Aly, Youssef L.; Pedersen, Erik Bjerreg.; La Colla, Paolo;

    2007-01-01

    The synthesis and the anti-HIV-1 activity of a series of 2-arylthio-6-benzyl-2,3-dihydro-1H-pyrimidin-4-ones (aryl S-DABOs) are reported. These compounds were synthesized via a coupling reaction of the corresponding 6-benzyl-2-thiouracils with aryl iodides in the presence of neocuproine hydrate......, copper(I) iodide, and sodium tert-butoxide. Target compounds showed moderate activity against HIV-1....

  7. An Efficient and General Method for Formylation of Aryl Bromides with CO2 and Poly(methylhydrosiloxane).

    Science.gov (United States)

    Yu, Bo; Yang, Zhenzhen; Zhao, Yanfei; Hao, Leiduan; Zhang, Hongye; Gao, Xiang; Han, Buxing; Liu, Zhimin

    2016-01-18

    The formylation of aryl halides with CO2 to generate aryl aldehydes is challenging. Herein, we report a novel synthesis of aryl aldehydes by formylation of aryl bromides with CO2 and a waste silane, poly(methylhydrosiloxane) (PMHS). It has been discovered that a simple combination of 1,3-bis(diphenyphosphino)propane (DPPP)-chelated Pd catalyst, Pd(DPPP)Cl2 , with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) is able to effectively catalyze the reaction, leading to aryl aldehydes in moderate to excellent yields, and without any by-products in most cases. Moreover, this route could be extended to the formylation of aryl iodides with high efficiency. This approach is simple, less costly, and environmentally friendly, and also widens the applications of CO2 to form value-added chemicals by the construction of new C-C bonds.

  8. Amberlyst-15 catalyzed synthesis of alkyl/aryl/heterocyclic phosphonates

    Institute of Scientific and Technical Information of China (English)

    U.M. Rao Kunda; V.N. Reddy Mudumala; C.S. Reddy Gangireddy; B.R. Nemallapudi; K.N. Sandip; S.R. Cirandur

    2011-01-01

    A novel and efficient procedure for the synthesis of alkyl phosphonates through one pot condensation of alkyl halide and tri-alkyl/aryl phosphite in the presence of Amberlyst-15 as catalyst under solvent free conditions was applied. It demonstrated several advantages such as good yields of products, simple operation, convenient separation and inexpensive catalyst.

  9. Crystal structures of five 1-alkyl-4-aryl-1,2,4-triazol-1-ium halide salts

    Directory of Open Access Journals (Sweden)

    Marites A. Guino-o

    2015-06-01

    Full Text Available The asymmetric units for the salts 4-(4-fluorophenyl-1-isopropyl-1,2,4-triazol-1-ium iodide, C11H13FN3+·I−, (1, 1-isopropyl-4-(4-methylphenyl-1,2,4-triazol-1-ium iodide, C12H16N3+·I−, (2, 1-isopropyl-4-phenyl-1,2,4-triazol-1-ium iodide, C11H14N3+·I−, (3, and 1-methyl-4-phenyl-1,2,4-triazol-1-ium iodide, C9H10N3+·I−, (4, contain one cation and one iodide ion, whereas in 1-benzyl-4-phenyl-1,2,4-triazol-1-ium bromide monohydrate, C15H14N3+·Br−·H2O, (5, there is an additional single water molecule. There is a predominant C—H...X(halide interaction for all salts, resulting in a two-dimensional extended sheet network between the triazolium cation and the halide ions. For salts with para-substitution on the aryl ring, there is an additional π–anion interaction between a triazolium carbon and iodide displayed by the layers. For salts without the para-substitution on the aryl ring, the π–π interactions are between the triazolium and aryl rings. The melting points of these salts agree with the predicted substituent inductive effects.

  10. A convenient enantioselective CBS-reduction of arylketones in flow-microreactor systems.

    Science.gov (United States)

    De Angelis, Sonia; De Renzo, Maddalena; Carlucci, Claudia; Degennaro, Leonardo; Luisi, Renzo

    2016-05-01

    A convenient, versatile, and green CBS-asymmetric reduction of aryl and heteroaryl ketones has been developed by using the microreactor technology. The study demonstrates that it is possible to handle borane solution safely within microreactors and that the reaction performs well using 2-MeTHF as a greener solvent. PMID:27086654

  11. Synthesis of (18) F-Difluoromethylarenes from Aryl (Pseudo) Halides.

    Science.gov (United States)

    Shi, Hang; Braun, Augustin; Wang, Lu; Liang, Steven H; Vasdev, Neil; Ritter, Tobias

    2016-08-26

    A general method for the synthesis of [(18) F]difluoromethylarenes from [(18) F]fluoride for radiopharmaceutical discovery is reported. The method is practical, operationally simple, tolerates a wide scope of functional groups, and enables the labeling of a variety of arenes and heteroarenes with radiochemical yields (RCYs, not decay-corrected) from 10 to 60 %. The (18) F-fluorination precursors are readily prepared from aryl chlorides, bromides, iodides, and triflates. Seven (18) F-difluoromethylarene drug analogues and radiopharmaceuticals including Claritin, fluoxetine (Prozac), and [(18) F]DAA1106 were synthesized to show the potential of the method for applications in PET radiopharmaceutical design. PMID:27491349

  12. Highly Efficient N-Monomethylation of Primary Aryl Amines

    Institute of Scientific and Technical Information of China (English)

    PENG, Yiyuan; LIU, Hanliang; TANG, Min; CAI, Lisheng; PIKE, Victor

    2009-01-01

    A highly efficient method for specific synthesis of N-monomethylarylamines is presented. Anilines were treated with acetic anhydride and triethylamine in dry CH2Cl2 to give the corresponding acetamides. The subsequent N-monomethylation of acetyl aryl amines with methyl iodide and Nail in THF introduced methyl group. Acid hy- drolysis of the N-methyl acetanilides in ethylene glycol generated the corresponding N-methyl-N-aryi amines in high yields. This method was also used to synthesize (E)-2-bromo-5-(4-methylaminostyryl)pyridine that may be useful as an amyloid imaging agent for Alzheimer's disease.

  13. Practical synthesis of aryl-2-methyl-3-butyn-2-ols from aryl bromides via conventional and decarboxylative copper-free Sonogashira coupling reactions

    Directory of Open Access Journals (Sweden)

    Andrea Caporale

    2014-02-01

    Full Text Available Two efficient protocols for the palladium-catalyzed synthesis of aryl-2-methyl-3-butyn-2-ols from aryl bromides in the absence of copper were developed. A simple catalytic system consisting of Pd(OAc2 and P(p-tol3 using DBU as the base and THF as the solvent was found to be highly effective for the coupling reaction of 2-methyl-3-butyn-2-ol (4 with a wide range of aryl bromides in good to excellent yields. Analogously, the synthesis of aryl-2-methyl-3-butyn-2-ols was performed also through the decarboxylative coupling reaction of 4-hydroxy-4-methyl-2-pentynoic acid with aryl bromides, using a catalyst containing Pd(OAc2 in combination with SPhos or XPhos in the presence of tetra-n-butylammonium fluoride (TBAF as the base and THF as the solvent. Therefore, new efficient approaches to the synthesis of terminal acetylenes from widely available aryl bromides rather than expensive iodides and using 4 or propiolic acid rather than TMS-acetylene as inexpensive alkyne sources are described.

  14. CuI/Proline-catalyzed N-Arylation of Nitrogen Heterocycles

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Ma's CuI/proline procedure for the catalytic cross coupling between nitrogen heterocycles and aryl halides was markedly improved. The key finding was that K3PO4 was a much better base than K2CO3 for the reaction. With this new reaction condition the cross coupling with aryl iodides could be accomplished in 1,4-dioxane instead of DMSO. This reactin also could be carried out in DMF. Furthermore, the coupling yields under the new conditions are usually higher than in Ma's original methods.

  15. Unusual selectivity-determining factors in the phosphine-free Heck arylation of allyl ethers

    DEFF Research Database (Denmark)

    Ambrogio, I.; Fabrizi, G.; Cacchi, S.;

    2008-01-01

    The Heck reaction of aryl iodides and bromides with allyl ethers has been investigated. Using phosphinefree Pd(OAc)(2) in DNIF at 90 degrees C in the presence of Bu4NOAc, the reaction gave cinnamyl derivatives, usually in good to high yields, with a wide range of aryl halides. The reaction tolera...... for cinnamyl ether over enol ether products. Interestingly, it was found that the product selectivity does not arise from competing beta-hydride eliminations but rather from a competition between beta-elimination and hindered single-bond rotation in the initial carbopalladation product....

  16. Copper-Catalyzed 2,2,2-Trifluoroethylthiolation of Aryl Halides.

    Science.gov (United States)

    Chen, Shouxiong; Zhang, Mengjia; Liao, Xuebin; Weng, Zhiqiang

    2016-09-01

    Herein, a copper-catalyzed 2,2,2-trifluoroethylthiolation reaction of aryl bromides and iodides with elemental sulfur, and 1,1,1-trifluoro-2-iodoethane is described. The reaction showed excellent functional group tolerance and allowed the synthesis of various substituted aryl 2,2,2-trifluoroethyl thioethers with good to excellent yields. This transformation constitutes a one-pot synthesis of 2,2,2-trifluoroethylthiolated compounds from inexpensive, readily available starting materials. Utility of the protocol was further demonstrated in the late-stage synthesis of the pirfenidone derivative. The copper thiolate species were prepared and proposed as key intermediates in the catalytic cycle. PMID:27477255

  17. Synthesis of mercuric iodide and bismuth tri-iodide nanoparticles for heavy metal iodide films nucleation

    Energy Technology Data Exchange (ETDEWEB)

    Fornaro, L.; Pereira, H.Bentos [Compound Semiconductors Group, CURE, Universidad de la Republica, Rocha (Uruguay); Aguiar, I.; Perez Barthaburu, M. [Compound Semiconductors Group, Facultad de Quimica, Univ. de la Republica, Montevideo (Uruguay)

    2011-12-15

    We synthesized mercuric iodide and bismuth tri-iodide nanoparticles by suspension in octadecene, from Hg(NO{sub 3}){sub 2}.H{sub 2}O and I{sub 2}, and from Bi(NO{sub 3}){sub 3}.5H{sub 2}O and I{sub 2}, respectively. The best synthesis conditions were 2 h at 70-80 C, followed by 10 min at 110 C for mercuric iodide nanoparticles, and 4 h at 80-110 C, followed by 10 min at 180-210 C for bismuth tri-iodide ones. Nanoparticles were then washed and centrifuged with ether repeatedly. Compounds identity was confirmed by X-ray diffraction (XRD) and energy dispersive spectrometry (EDS). We found shifts of the X-ray diffraction maxima for nanoparticles of both compounds. We characterized the nanoparticles by transmission (TEM) and scanning (SEM) electron microscopy. We obtained disk-like and squared mercuric iodide nanostructures, 80-140 nm and 100-125 nm in size respectively. We also obtained rounded and rod-like bismuth tri-iodide nanoparticles, 30-500 nm in size. Acetonitrile and isopropanol suspensions of mercuric iodide nanoparticles, and acetonitrile suspension of bismuth tri-iodide nanoparticles exhibited peak maxima shifts in their UV-Vis spectra. We synthesized for the first time mercuric iodide and bismuth tri-iodide nanoparticles by the suspension method, although we have not yet obtained uniform shape and size distributions. They offer interesting perspectives for crystalline film nucleation and for improving current applications of these materials, as well as for opening new ones. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  18. Palladium-Catalyzed α-Arylation of Aryl Acetic Acid Derivatives via Dienolate Intermediates with Aryl Chlorides and Bromides

    OpenAIRE

    Sha, Sheng-Chun; Zhang, Jiadi; Walsh, Patrick J.

    2015-01-01

    To date, examples of α-arylation of carboxylic acids remain scarce. Using a deprotonative cross-coupling process (DCCP), a method for palladium-catalyzed γ-arylation of aryl acetic acids with aryl halides has been developed. This protocol is applicable to a wide range of aryl bromides and chlorides. A procedure for the palladium-catalyzed α-arylation of styryl acetic acids is also described.

  19. 21 CFR 172.375 - Potassium iodide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium iodide. 172.375 Section 172.375 Food and... Dietary and Nutritional Additives § 172.375 Potassium iodide. The food additive potassium iodide may be safely used in accordance with the following prescribed conditions: (a) Potassium iodide may be...

  20. Mercuric iodide sensor technology

    International Nuclear Information System (INIS)

    This report describes the improvement in the performance and the manufacturing yield of mercuric iodide detectors achieved by identifying the dominant impurities, carrier traps, and processing steps limiting device performance. Theoretical studies of electron and hole transport in this material set fundamental limits on detector performance and provided a standard against which to compare experimental results. Spectroscopy techniques including low temperature photoluminescence and thermally stimulated current spectroscopy were applied to characterize the deep level traps in this material. Traps and defects that can be introduced into the detector during growth, from the contact, and during the various steps in detector fabrication were identified. Trap energy levels and their relative abundances were determined. Variations in material quality and detector performance at the micron scale were investigated to understand the distribution in electric field in large volume detectors suitable for gamma-ray spectroscopy. Surface aging and contact degradation was studied extensively by techniques including atomic force microscopy, transmission electron microscopy, and variable angle spectroscopic ellipsometry. Preferred handling and processing procedures for maximizing detector performance and yield were established. The manufacturing yield of high resolution gamma-ray detectors was improved from a few percent to more than 30%

  1. Direct N9-arylation of purines with aryl halides

    DEFF Research Database (Denmark)

    Larsen, Anders Foller; Ulven, Trond

    2014-01-01

    An efficient method for N-arylation of purines is reported. The N-arylation is catalysed by Cu(i) and 4,7-bis(2-hydroxyethylamino)-1,10-phenanthroline (BHPhen) in aqueous DMF or ethanol. The reaction generally proceeds with high selectivity for the N(9)-position....

  2. Synthesis of Mixed Carbonates via a Three-Component Coupling of Alcohols, CO2, and Alkyl Halides in the Presence of K2CO3 and Tetrabutylammonium Iodide

    OpenAIRE

    Yu-Mei Shen; Min Shi

    2002-01-01

    Various mixed carbonates can be conveniently prepared in good yields using the corresponding alcohols, alkyl halides under CO2 atmosphere in the presence of potassium carbonate or sodium carbonate and tetrabutylammonium iodide.

  3. A facile approach to asymmetrical biaryls via coupling reaction of aryl halides with sodium tetraphenylborate catalyzed by MCM-41-supported sulfur palladium(O) complex

    Institute of Scientific and Technical Information of China (English)

    Qiu Hua Xu; Ping Ping Wang; Ming Zhong Cai

    2007-01-01

    Various functionalized asymmetrical biaryls can be synthesized in high to excellent yields via coupling reaction of aryl iodides or bromides with NaBPh4 catalyzed by MCM-41-supported sulfur palladium(O) complex. This palladium complex can be easily recovered and reused many times without loss of activity.

  4. A unified approach for the synthesis of symmetrical and unsymmetrical dibenzyl ethers from aryl aldehydes through reductive etherification

    Directory of Open Access Journals (Sweden)

    J. Sembian Ruso

    2016-05-01

    Full Text Available In this paper, we describe a simple and convenient conversion of aryl aldehydes to symmetrical dibenzyl ethers through reductive etherification. Similarly, unsymmetrical dibenzyl ether was obtained from aryl aldehyde and TES-protected benzyl alcohol. Triethyl silane with catalytic amount of InCl3 was found to be an efficient condition for the reductive etherification. Moreover, it exhibits remarkable functional group compatibility with yield ranging from good to excellent.

  5. Iron-Catalyzed Acylation of Polyfunctionalized Aryl- and Benzylzinc Halides with Acid Chlorides.

    Science.gov (United States)

    Benischke, Andreas D; Leroux, Marcel; Knoll, Irina; Knochel, Paul

    2016-08-01

    FeCl2 (5 mol %) catalyzes a smooth and convenient acylation of functionalized arylzinc halides at 50 °C (2-4 h) and benzylic zinc chlorides at 25 °C (0.5-4 h) with a variety of acid chlorides leading to polyfunctionalized diaryl and aryl heteroaryl ketones. PMID:27457108

  6. An effective synthesis of β-aryl substituted isotetronic acids via Suzuki coupling

    Institute of Scientific and Technical Information of China (English)

    Huan Sheng Chen; Xia Ping Ma; Zhi Ming Li; Quan Rui Wang; Feng Gang Tao

    2008-01-01

    lsotetronic acids are of great agricultural and pharmacological relevance and occur in a number of natural products.A convenient synthetic pathway to β-aryl substituted isotetronic acid derivatives was developed via Suzuki cross-coupling of the corresponding β-bromo substituted isotetronic acid derivatives with arylboronic acids under palladium acetate catalysis.Good to excellent yields have been achieved.

  7. LDA-Mediated Synthesis of Triarylmethanes by Arylation of Diarylmethanes with Fluoroarenes at Room Temperature.

    Science.gov (United States)

    Ji, Xinfei; Huang, Tao; Wu, Wei; Liang, Fang; Cao, Song

    2015-10-16

    A practical and convenient approach for the secondary C(sp(3))-H arylation of diarylmethanes with various fluoroarenes is described. The reaction proceeds smoothly in the presence of LDA (lithium diisopropylamide) at room temperature and affords triarylmethanes in moderate to high yields.

  8. Gold-Catalyzed Direct Arylation

    OpenAIRE

    Ball, L. T.; Lloyd-jones, G. C.; Russell, C. A.

    2012-01-01

    Biaryls (two directly connected aromatic rings, Ar1-Ar2) are common motifs in pharmaceuticals, agrochemicals, and organic materials. Current methods for establishing the Ar1-Ar2 bond are dominated by the cross-coupling of aryl halides (Ar1-X) with aryl metallics (Ar2-M). We report that, in the presence of 1 to 2 mole percent of a gold catalyst and a mild oxidant, a wide range of arenes (Ar1-H) undergo site-selective arylation by arylsilanes (Ar2-SiMe3) to generate biaryls (Ar1-Ar2), with litt...

  9. 21 CFR 184.1634 - Potassium iodide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium iodide. 184.1634 Section 184.1634 Food... Specific Substances Affirmed as GRAS § 184.1634 Potassium iodide. (a) Potassium iodide (KI, CAS Reg. No. 7681-11-0) is the potassium salt of hydriodic acid. It occurs naturally in sea water and in...

  10. 21 CFR 582.5634 - Potassium iodide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Potassium iodide. 582.5634 Section 582.5634 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5634 Potassium iodide. (a) Product. Potassium iodide. (b) Tolerance. 0.01 percent....

  11. An Improved Protocol for the Pd-catalyzed α-Arylation of Aldehydes with Aryl Halides

    OpenAIRE

    Martín, Rubén; Buchwald, Stephen L.

    2008-01-01

    An improved protocol for the Pd-catalyzed α-arylation of aldehydes with aryl halides has been developed. The new catalytic system allows for the coupling of an array of substrates including challenging electron-rich aryl bromides and less reactive aryl chlorides. The utility of this method has been demonstrated in a new total synthesis of (±)-sporochnol.

  12. Copper-Catalyzed Three-Component Reaction for Regioselective Aryl- and Heteroarylselenation of Indoles using Selenium Powder.

    Science.gov (United States)

    Luo, Dongping; Wu, Ge; Yang, Hang; Liu, Miaochang; Gao, Wenxia; Huang, Xiaobo; Chen, Jiuxi; Wu, Huayue

    2016-06-01

    A new and efficient copper-catalyzed C3 aryl- and heteroarylselenation of indoles employing selenium powder has been developed. The advantages of this chemistry involve the use of cheap selenating reagents, tolerance of a variety of functional groups, and practicality. In addition, this protocol has been further elaborated in an intramolecular phenylselenation of a (hetero) aryl C-H bond to construct an important motif of benzoselenopheno[3,2-b]indole. A preliminary mechanism study suggests that the reaction starts with a Ullman-type selenation between aryl iodides and selenium, followed by an oxidative cross-coupling with indole. The utility of this method has been demonstrated in an efficient gram-scale synthesis and an application to the synthesis of tubulin polymerization inhibitor. PMID:27191713

  13. Embracing the convenient care concept.

    Science.gov (United States)

    Ferris, Allison H; McAndrew, Thomas M; Shearer, Debra; Donnelly, Gloria F; Miller, Howard A

    2010-01-01

    The landscape of primary care medicine is rapidly changing. The decline in interest, both in primary care fields and students choosing these career paths, has left a vacuum in the health care system that must be filled. One of the recent developments has been the birth of "convenient care centers," also known as "retail clinics." This form of health care delivery has mostly been entrepreneurial and based in retail organizations, such as drug stores. These walk-in clinics provide basic medical care for minor common medical conditions, such as sore throat, urinary tract infection, the common cold, and ear infections. Much of this care is provided not by physicians, but by nurse practitioners or physician assistants. After seeing the success of the earliest of these clinics, MinuteClinic by CVS, many other businesses joined the venture, and retail clinics popped up in Wal-Mart, Target, and many local grocery stores. Gradually, hospital systems, physician groups, and managed care companies have also entered the market, sometimes partnering with retail outlets, such as the local grocery store or Wal-Mart, and less often, starting a stand-alone facility. Only 12% of retail clinics are owned by hospital systems or physician groups, while 73% are owned by CVS, Walgreens, or Target. There is even a national nonprofit organization called the Convenient Care Association, started in 2006, and based in Philadelphia, PA. This new trend in delivering health care has been mostly, if not totally, ignored by the medical school practice plans, with the exception of the Mayo Clinic in Minnesota, which has developed several "express care" clinics as stand-alone facilities. As a medical school practice plan and a division of general internal medicine, we could continue to keep a blind eye toward this new trend in primary care medicine or embrace the concept. We aim to develop a new convenient care model integrating our College of Medicine practice plan in partnership with our College of

  14. Uptake of iodide in the marine haptophyte Isochrysis sp. (T.ISO) driven by iodide oxidation.

    Science.gov (United States)

    van Bergeijk, Stef A; Hernández Javier, Laura; Heyland, Andreas; Manchado, Manuel; Pedro Cañavate, José

    2013-08-01

    Uptake of iodide was studied in the marine microalga Isochrysis sp. (isol. Haines, T.ISO) during short-term incubations with radioactive iodide ((125) I(-) ). Typical inhibitors of the sodium/iodide symporter (NIS) did not inhibit iodide uptake, suggesting that iodide is not taken up through this transport protein, as is the case in most vertebrate animals. Oxidation of iodide was found to be an essential step for its uptake by T.ISO and it seemed likely that hypoiodous acid (HOI) was the form of iodine taken up. Uptake of iodide was inhibited by the addition of thiourea and of other reducing agents, like L-ascorbic acid, L-glutathione and L-cysteine and increased after the addition of oxidized forms of the transition metals Fe and Mn. The simultaneous addition of both hydrogen peroxide (H2 O2 ) and a known iodide-oxidizing myeloperoxidase (MPO) significantly increased iodine uptake, but the addition of H2 O2 or MPO separately, had no effect on uptake. This confirms the observation that iodide is oxidized prior to uptake, but it puts into doubt the involvement of H2 O2 excretion and membrane-bound or extracellular haloperoxidase activity of T.ISO. The increase of iodide uptake by T.ISO upon Fe(III) addition suggests the nonenzymatic oxidation of iodide by Fe(III) in a redox reaction and subsequent influx of HOI. This is the first report on the mechanism of iodide uptake in a marine microalga.

  15. Synthesis of novel room temperature chiral ionic liquids: application as reaction media for the heck arylation of aza-endocyclic acrylates

    International Nuclear Information System (INIS)

    New achiral and chiral RTILs were prepared using novel and/or optimized synthetic routes. These new series of imidazolinium, imidazolium, pyridinium and nicotine-derived ionic liquids were fully characterized including differential scanning calorimetry (DSC) analysis. The performance of these achiral and chiral room temperature ionic liquids (RTILs) was demonstrated by means of the Heck arylation of endocyclic acrylates employing arenediazonium salts and aryl iodides. The Heck arylations performed in the presence of these ionic entities, either as a solvent or as an additive, were effective leading to complete conversion of the substrate and good to excellent yield of the Heck adduct. In spite of the good performances, no asymmetric induction was observed in any of the cases studied. Two new diastereoisomeric NHC-palladium complexes were prepared in good yields from a chiral imidazolium salt and their structure characterized by X-ray diffraction. Overall, the Heck arylations employing arenediazonium tetrafluoroborates in RTILs were more effective than the traditional protocols employing aryl iodides in terms of reactivity and yields. (author)

  16. Palladium-Catalyzed Negishi Cross-Coupling Reaction of Aryl Halides with (Difluoromethyl)zinc Reagent.

    Science.gov (United States)

    Aikawa, Kohsuke; Serizawa, Hiroki; Ishii, Koki; Mikami, Koichi

    2016-08-01

    The palladium-catalyzed Negishi cross-coupling reaction of aryl iodides and bromides with (difluoromethyl)zinc reagent bearing a diamine such as TMEDA is achieved to provide the difluoromethylated aromatic compounds in good to excellent yields. The advantages of (difluoromethyl)zinc reagent are that (1) the derivatives, which possess different stability and reactivity, can be readily prepared via ligand screening and (2) transmetalation of a difluoromethyl group from the zinc reagent to palladium catalyst efficiently proceeds without an activator. PMID:27442347

  17. Neutron Detection with Mercuric Iodide

    CERN Document Server

    Bell, Z A

    2003-01-01

    Mercuric iodide is a high-density, high-Z semiconducting material useful for gamma ray detection. This makes it convertible to a thermal neutron detector by covering it with a boron rich material and detecting the 478 keV gamma rays resulting from the sup 1 sup 0 B(n, alpha) sup 7 Li* reaction. However, the 374 barn thermal capture cross section of sup n sup a sup t Hg, makes the detector itself an attractive absorber, and this has been exploited previously. Since previous work indicates that there are no low-energy gamma rays emitted in coincidence with the 368 keV capture gamma from the dominant sup 1 sup 9 sup 9 Hg(n, gamma) sup 2 sup 0 sup 0 Hg reaction, only the 368 keV capture gamma is seen with any efficiency a relatively thin (few mm) detector. In this paper we report preliminary measurements of neutrons via capture reactions in a bare mercuric iodide crystal and a crystal covered in sup 1 sup 0 B-loaded epoxy. The covered detector is an improvement over the bare detector because the presence of both ...

  18. Neutron Detection with Mercuric Iodide

    Energy Technology Data Exchange (ETDEWEB)

    Bell, Z.A.

    2003-06-17

    Mercuric iodide is a high-density, high-Z semiconducting material useful for gamma ray detection. This makes it convertible to a thermal neutron detector by covering it with a boron rich material and detecting the 478 keV gamma rays resulting from the {sup 10}B(n, {alpha}){sup 7}Li* reaction. However, the 374 barn thermal capture cross section of {sup nat}Hg, makes the detector itself an attractive absorber, and this has been exploited previously. Since previous work indicates that there are no low-energy gamma rays emitted in coincidence with the 368 keV capture gamma from the dominant {sup 199}Hg(n, {gamma}){sup 200}Hg reaction, only the 368 keV capture gamma is seen with any efficiency a relatively thin (few mm) detector. In this paper we report preliminary measurements of neutrons via capture reactions in a bare mercuric iodide crystal and a crystal covered in {sup 10}B-loaded epoxy. The covered detector is an improvement over the bare detector because the presence of both the 478 and 368 keV gamma rays removes the ambiguity associated with the observation of only one of them. Pulse height spectra, obtained with and without lead and cadmium absorbers, showed the expected gamma rays and demonstrated that they were caused by neutrons.

  19. Rare, severe hypersensitivity reaction to potassium iodide

    DEFF Research Database (Denmark)

    Nielsen, Anne Sofie Korsholm; Ebbehøj, Eva; Richelsen, Bjørn

    2014-01-01

    The literature reports a large variety of adverse reactions to potassium iodide. A severe hypersensitivity reaction to potassium iodide in a 51-year-old woman with Graves' thyrotoxicosis is described. Following administration the patient developed sialadenitis, conjunctivitis, stomatitis and acne...

  20. Predissociation dynamics of lithium iodide

    CERN Document Server

    Schmidt, H; Stienkemeier, F; Bogomolov, A S; Baklanov, A V; Reich, D M; Skomorowski, W; Koch, C P; Mudrich, M

    2015-01-01

    The predissociation dynamics of lithium iodide (LiI) in the first excited A-state is investigated for molecules in the gas phase and embedded in helium nanodroplets, using femtosecond pump-probe photoionization spectroscopy. In the gas phase, the transient Li+ and LiI+ ion signals feature damped oscillations due to the excitation and decay of a vibrational wave packet. Based on high-level ab initio calculations of the electronic structure of LiI and simulations of the wave packet dynamics, the exponential signal decay is found to result from predissociation predominantly at the lowest avoided X-A potential curve crossing, for which we infer a coupling constant V=650(20) reciprocal cm. The lack of a pump-probe delay dependence for the case of LiI embedded in helium nanodroplets indicates fast droplet-induced relaxation of the vibrational excitation.

  1. Predissociation dynamics of lithium iodide

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, H.; Vangerow, J. von; Stienkemeier, F.; Mudrich, M., E-mail: mudrich@physik.uni-freiburg.de [Physikalisches Institut, Universität Freiburg, 79104 Freiburg (Germany); Bogomolov, A. S. [Institute of Chemical Kinetics and Combustion, Novosibirsk 630090 (Russian Federation); Baklanov, A. V. [Institute of Chemical Kinetics and Combustion, Novosibirsk 630090 (Russian Federation); Novosibirsk State University, Novosibirsk 630090 (Russian Federation); Reich, D. M.; Skomorowski, W.; Koch, C. P. [Theoretische Physik, Universität Kassel, Heinrich-Plett-Str. 40, 34132 Kassel (Germany)

    2015-01-28

    The predissociation dynamics of lithium iodide (LiI) in the first excited A-state is investigated for molecules in the gas phase and embedded in helium nanodroplets, using femtosecond pump-probe photoionization spectroscopy. In the gas phase, the transient Li{sup +} and LiI{sup +} ion signals feature damped oscillations due to the excitation and decay of a vibrational wave packet. Based on high-level ab initio calculations of the electronic structure of LiI and simulations of the wave packet dynamics, the exponential signal decay is found to result from predissociation predominantly at the lowest avoided X-A potential curve crossing, for which we infer a coupling constant V{sub XA} = 650(20) cm{sup −1}. The lack of a pump-probe delay dependence for the case of LiI embedded in helium nanodroplets indicates fast droplet-induced relaxation of the vibrational excitation.

  2. Room-Temperature Palladium-Catalyzed Direct 2-Arylation of Benzoxazoles with Aryl and Heteroaryl Bromides†

    Science.gov (United States)

    Gao, Feng; Kim, Byeong-Seon; Walsh, Patrick J.

    2014-01-01

    An efficient room-temperature palladium-catalyzed direct 2-arylation of benzoxazoles with aryl bromides is presented. The Pd(OAc)2/NiXantphos-based catalyst enables the introduction of various aryl and heteroaryl groups, via a deprotonative cross-coupling process (DCCP) in good to excellent yields (75–99%). PMID:25078988

  3. Forecasting Exchange Rates with Commodity Convenience Yields

    OpenAIRE

    Beutler, Toni

    2012-01-01

    This paper investigates whether commodity convenience yields - the yields that accrue to the holders of physical commodities - can predict the exchange rate of commodity-exporters' currencies. Predictability is a consequence of the fact that i) convenience yields are useful predictors for commodity prices and ii) commodity currencies have a strong relationship with commodity prices. The empirical evidence indicates that there is a significant relationship between aggregate measures of conveni...

  4. Pd immobilized on modified magnetic Fe₃O₄ nanoparticles: Magnetically recoverable and reusable Pd nanocatalyst for Suzuki-Miyaura coupling reactions and Ullmann-type N-arylation of indoles

    Indian Academy of Sciences (India)

    RAMIN GHORBANI-VAGHEI; SABA HEMMATI; MALAK HEKMATI

    2016-07-01

    The Pd supported on amidoxime (AO)-functionalized Fe₃O₄ ( Fe₃O₄ /AO/Pd) hybrid material was used as an effective and recyclable nanocatalyst in Suzuki-Miyaura coupling reactions. The catalyst was very effective for the Suzuki-Miyaura reaction of aryl halides (Ar–I, Ar–Br, Ar–Cl) with phenylboronic acid and conversion was excellent in most cases. The yields of the products were in the range from 7–98%. The catalyst showed good stability and could be recovered and reused for six reaction cycles without a significant loss in its catalytic activity. Also, a wide range of N-arylated indoles are selectively synthesized through inter molecular C(aryl)–N bond formation from the corresponding aryl iodides and indoles through Ullmann-type coupling reactions in the presence of the prepared catalyst.

  5. CHARACTERISTICS OF THE ROMANIAN CONVENIENCE MARKET

    Directory of Open Access Journals (Sweden)

    Dragusin Mariana

    2009-05-01

    Full Text Available Consumers find convenience – understood as a quick and effortless shopping and consuming processes – anywhere where providers make life easy for them, and not just in a few selected convenience channels. Seen this way, the concept of “convenience” clearly

  6. Convenience foods. What, why, and when.

    Science.gov (United States)

    Scholliers, Peter

    2015-11-01

    An attempt is made to assess the academic interest in convenience foods in the past decades in order to introduce this special section on historical dimensions of convenience foods, prepared by FOST, a unit that investigates the history and culture of food (up to today). First, the rise of academic interest is trailed since the appearance of the concept in the 1920s and, next, themes in connection to this interest are considered (e.g., time, health, or gender). Then, definitions of convenience foods are tracked since the 1950s, which leads to suggesting a clear focus (linking convenience foods to home cooking of meals and industrially produced foods). The conclusion stresses the changing definition of the concept, as well as the need to gain historical insight in present-day issues related to convenience foods.

  7. Plasma etching of cesium iodide

    International Nuclear Information System (INIS)

    Thick films of cesium iodide (CsI) are often used to convert x-ray images into visible light. Spreading of the visible light within CsI, however, reduces the resolution of the resulting image. Anisotropic etching of the CsI film into an array of micropixels can improve the image resolution by confining light within each pixel. The etching process uses a high-density inductively coupled plasma to pattern CsI samples held by a heated, rf-biased chuck. Fluorine-containing gases such as CF4 are found to enhance the etch rate by an order of magnitude compared to Ar+ sputtering alone. Without inert-gas ion bombardment, however, the CF4 etch becomes self-limited within a few microns of depth due to the blanket deposition of a passivation layer. Using CF4+Ar continuously removes this layer from the lateral surfaces, but the formation of a thick passivation layer on the unbombarded sidewalls of etched features is observed by scanning electron microscopy. At a substrate temperature of 220 deg. C, the minimum ion-bombardment energy for etching is Ei∼50 eV, and the rate depends on Ei1/2 above 65 eV. In dilute mixtures of CF4 and Ar, the etch rate is proportional to the gas-phase density of atomic fluorine. Above 50% CF4, however, the rate decreases, indicating the onset of net surface polymer deposition. These observations suggest that anisotropy is obtained through the ion-enhanced inhibitor etching mechanism. Etching exhibits an Arrhenius-type behavior in which the etch rate increases from ∼40 nm/min at 40 deg. C to 380 nm/min at 330 deg. C. The temperature dependence corresponds to an activation energy of 0.13±0.01 eV. This activation energy is consistent with the electronic sputtering mechanism for alkali halides

  8. A convenient category for directed homotopy

    DEFF Research Database (Denmark)

    Fajstrup, Lisbeth; Rosický, J.

    We propose a convenient category for directed homotopy consisting of preordered topological spaces generated by cubes. Its main advantage is that, like the category of topological spaces generated by simplices suggested by J. H. Smith, it is locally presentable.......We propose a convenient category for directed homotopy consisting of preordered topological spaces generated by cubes. Its main advantage is that, like the category of topological spaces generated by simplices suggested by J. H. Smith, it is locally presentable....

  9. Popularity of “convenience food”

    OpenAIRE

    Grażyna Adamczyk

    2010-01-01

    The article describes the origins and essence of convenience food, its classifications, and consumer opinions and attitudes. It was concluded that, despite the universality and the unflagging popularity of convenience foods, there is the view that users of this category of products have very different levels of knowledge about its nature and nutritional value and health. Contemporary consumers strongly and positively perceive it, show great knowledge of different types and attributes. Though,...

  10. Ru-Catalysed C–H Arylation of Indoles and Pyrroles with Boronic Acids: Scope and Mechanistic Studies

    Science.gov (United States)

    Sollert, Carina; Devaraj, Karthik; Orthaber, Andreas; Gates, Paul J; Pilarski, Lukasz T

    2015-01-01

    The Ru-catalysed C2–H arylation of indoles and pyrroles by using boronic acids under oxidative conditions is reported. This reaction can be applied to tryptophan derivatives and tolerates a wide range of functional groups on both coupling partners, including bromides and iodides, which can be further derivatised selectively. New indole-based ruthenacyclic complexes are described and investigated as possible intermediates in the reaction. Mechanistic studies suggest the on-cycle intermediates do not possess a para-cymene ligand and that the on-cycle metalation occurs through an electrophilic attack by the Ru centre. PMID:25689052

  11. Synthesis of Dimethyl Aryl Acylsulfonium Bromides from Aryl Methyl Ketones in a DMSO-HBr System

    OpenAIRE

    Zhiling Cao; Dahua Shi; Yingying Qu; Chuanzhou Tao; Weiwei Liu; Guowei Yao

    2013-01-01

    A new, simplified method for the synthesis of dimethyl aryl acylsulfonium salts has been developed. A series of dimethyl aryl acylsulfonium bromides were prepared by the reaction of aryl methyl ketones with hydrobromic acid and dimethylsulfoxide (DMSO). This sulfonium salt confirms that bromine production and the bromination reaction take place in the DMSO-HBr oxidation system. What’s more, it is also a key intermediate for the synthesis of arylglyoxals.

  12. Pd-Catalyzed sequential β-C(sp(3))-H arylation and intramolecular amination of δ-C(sp(2))-H bonds for synthesis of quinolinones via an N,O-bidentate directing group.

    Science.gov (United States)

    Guan, Mingyu; Pang, Yubo; Zhang, Jingyu; Zhao, Yingsheng

    2016-05-19

    The pharmacological importance of 2-quinolinone derivatives is well known. Herein, we developed an effective protocol for the synthesis of 2-quinolinone derivatives by palladium-catalyzed sequential β-C(sp(3))-H arylation and selective intramolecular C(sp(2))-H/N-H amination starting with aryl iodides and carboxylic acids. A novel directing group, glycine dimethylamide, was used in the synthesis. We synthesized various quinolinone derivatives, including 5-substituted quinolinones, which are difficult to obtain using the traditional pathway. The directing group could be easily removed and could be readily transformed into other useful functional groups. PMID:27161570

  13. The partitioning of iodides into steam

    International Nuclear Information System (INIS)

    In order to estimate the likely releases of radioactive iodine during steam generator tube rupture (SGTR) faults, it is necessary to know the relevant partition coefficients as a function of temperature and solution composition. It has been suggested previously that, under SGTR fault conditions, partitioning of free or ion-paired I- into the steam may be more extensive than that for molecular HI. This report uses available information on the partitioning of iodides and other salts to provide a means of estimating the partition coefficient of the iodide ion as a function of boric acid concentration and temperature. (author)

  14. Adsorption of radioactive iodide by natural zeolites

    International Nuclear Information System (INIS)

    Two natural zeolites from Iranian deposits (clinoptilolite and natrolite) were characterized and their ability for adsorption of iodide from nuclear wastewaters was evaluated. The adsorption behavior was studied on natural and modified zeolites by γ-spectrometry using 131I as radiotracer. Adsorption isotherms and distribution coefficient (Kd) were measured. The results showed that clinoptilolite is a more promising zeolite for removal of iodide compared to natrolite. Furthermore, the adsorption was higher in silver, lead and thallium forms, whereas the lowest desorption was observed in lead modified zeolite. (author)

  15. The convenience food market in Great Britain: convenience food lifestyle (CFL) segments.

    Science.gov (United States)

    Buckley, Marie; Cowan, Cathal; McCarthy, Mary

    2007-11-01

    Convenience foods enable the consumer to save time and effort in food activities, related to shopping, meal preparation and cooking, consumption and post-meal activities. The objective of this paper is to report on the attitudes and reported behaviour of food consumers in Great Britain based on a review of their convenience food lifestyle (CFLs). The paper also reports the development and application of a segmentation technique that can supply information on consumer attitudes towards convenience foods. The convenience food market in Great Britain is examined and the key drivers of growth in this market are highlighted. A survey was applied to a nationally representative sample of 1000 consumers (defined as the persons primarily responsible for food shopping and cooking in the household) in Great Britain in 2002. Segmentation analysis, based on the identification of 20 convenience lifestyle factors, identified four CFL segments of consumers: the 'food connoisseurs' (26%), the 'home meal preparers' (25%), the 'kitchen evaders' (16%) and the 'convenience-seeking grazers' (33%). In particular, the 'kitchen evaders' and the 'convenience-seeking grazers' are identified as convenience-seeking segments. Implications for food producers, in particular, convenience food manufacturers are discussed. The study provides an understanding of the lifestyles of food consumers in Great Britain, and provides food manufacturers with an insight into what motivates individuals to purchase convenience foods. PMID:17537540

  16. The convenience food market in Great Britain: convenience food lifestyle (CFL) segments.

    Science.gov (United States)

    Buckley, Marie; Cowan, Cathal; McCarthy, Mary

    2007-11-01

    Convenience foods enable the consumer to save time and effort in food activities, related to shopping, meal preparation and cooking, consumption and post-meal activities. The objective of this paper is to report on the attitudes and reported behaviour of food consumers in Great Britain based on a review of their convenience food lifestyle (CFLs). The paper also reports the development and application of a segmentation technique that can supply information on consumer attitudes towards convenience foods. The convenience food market in Great Britain is examined and the key drivers of growth in this market are highlighted. A survey was applied to a nationally representative sample of 1000 consumers (defined as the persons primarily responsible for food shopping and cooking in the household) in Great Britain in 2002. Segmentation analysis, based on the identification of 20 convenience lifestyle factors, identified four CFL segments of consumers: the 'food connoisseurs' (26%), the 'home meal preparers' (25%), the 'kitchen evaders' (16%) and the 'convenience-seeking grazers' (33%). In particular, the 'kitchen evaders' and the 'convenience-seeking grazers' are identified as convenience-seeking segments. Implications for food producers, in particular, convenience food manufacturers are discussed. The study provides an understanding of the lifestyles of food consumers in Great Britain, and provides food manufacturers with an insight into what motivates individuals to purchase convenience foods.

  17. The reaction of carbon disulphide with -haloketones and primary amines in the presence of potassium iodide as catalyst

    Indian Academy of Sciences (India)

    Javad Safaei-Ghomi; Fariba Salimi; Ali Ramazani

    2013-09-01

    A simple, mild and convenient method has been developed for the synthesis of 3,4,5-trialkyl-1,3-thiazole-2(3)-thione derivatives through one pot three-component reaction between a primary amine, carbon disulphide, and -haloketone in the presence of potassium iodide at room temperature conditions. The products were obtained with excellent yield and appropriate reaction times. This reaction represents a rapid and unprecedented route to the described molecules that have biological specifications.

  18. Electrochemical reaction rates in a dye sentisised solar cell - the iodide/tri-iodide redox system

    DEFF Research Database (Denmark)

    Bay, Lasse; West, Keld; Winter-Jensen, Bjørn;

    2006-01-01

    The electrochemical reaction rate of the redox couple iodide / tri-iodide in acetonitrile is characterised by impedance spectroscopy. Different electrode materials relevant for the function of dye-sensitised solar cells (DSSC) are investigated. Preferably, the reaction with the iodide / tri......), and polyaniline (PANI) - all deposited onto fluorine doped tin oxide (FTO) glass. Both Pt and PEDOT are found to have sufficiently high catalytic activities for practical use as counter electrode in DSSC. The reaction resistance on FTO and anatase confirmed the beneficial effect of a compact anatase layer on top...

  19. Transition Metal Catalyzed Synthesis of Aryl Sulfides

    Directory of Open Access Journals (Sweden)

    Chad C. Eichman

    2011-01-01

    Full Text Available The presence of aryl sulfides in biologically active compounds has resulted in the development of new methods to form carbon-sulfur bonds. The synthesis of aryl sulfides via metal catalysis has significantly increased in recent years. Historically, thiolates and sulfides have been thought to plague catalyst activity in the presence of transition metals. Indeed, strong coordination of thiolates and thioethers to transition metals can often hinder catalytic activity; however, various catalysts are able to withstand catalyst deactivation and form aryl carbon-sulfur bonds in high-yielding transformations. This review discusses the metal-catalyzed arylation of thiols and the use of disulfides as metal-thiolate precursors for the formation of C-S bonds.

  20. Revealing the values behind convenience food consumption.

    Science.gov (United States)

    Botonaki, Anna; Mattas, Konstadinos

    2010-12-01

    The increasing importance of convenience in consumer food choices has attracted researchers' interest. In the effort to understand how convenience affects consumers' food preferences, values are believed to play an important role. The present study attempts to examine the way personal values suggested by Schwartz (1992) are associated with behaviour and attitudes regarding convenience food. A number of constructs describing food related attitudes and behaviours were developed and their relationship with personal values was analyzed following the methodology proposed by Brunsø, Scholderer, and Grunert (2004). Data were collected through a questionnaire survey from a random sample of consumers in Thessaloniki city, Greece. The results reveal that convenience food consumption and convenience orientation in the food domain are mainly connected with values that motivate people to seek new experiences, act independently and enhance their own personal interests, while are in conflict with values of conservation and self-transcendence. The opposite holds for other food related attitudes and behaviours like involvement with cooking and variety in diet. The findings seem to be of particular interest not only for marketers of food products, but also for food policy makers. PMID:20875475

  1. Influence of convenience on healthy food choice

    DEFF Research Database (Denmark)

    Mueller Loose, Simone; Peschel, Anne; Grebitus, Carola

    for policy makers as well as seafood marketers and are in line with the presented literature in that convenience seems to be an important driver which can be manipulated in order to increase seafood consumption. Consumers strongly prefer the ‘ready to eat’ half shell open oysters over closed oysters...... unclear to what degree consumer choice is affected by convenience relative to known choice drivers such as price, species and region of origin. This study contributes to filling this research gap by analyzing how consumers’ in-store choice of ready-packaged aquaculture oysters is driven by convenience...... factors (opened versus unopened presentation format, packaging format and accompaniments with or without visual serving suggestions) relative to traditionally examined demand factors of price, origin, species, health, environmental and quality claims. A total of 1,718 Australian oyster consumers...

  2. 21 CFR 184.1265 - Cuprous iodide.

    Science.gov (United States)

    2010-04-01

    ... the following specific limitations: Category of food Maximum treatment level in food Functional use... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Cuprous iodide. 184.1265 Section 184.1265 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  3. Electronic and optical properties of lead iodide

    DEFF Research Database (Denmark)

    Ahuja, R.; Arwin, H.; Ferreira da Silva, A.;

    2002-01-01

    The electronic properties and the optical absorption of lead iodide (PbI2) have been investigated experimentally by means of optical absorption and spectroscopic ellipsometry, and theoretically by a full-potential linear muffin-tin-orbital method. PbI2 has been recognized as a very promising...

  4. Convenient synthesis of volatile streptomyces lactones

    Digital Repository Service at National Institute of Oceanography (India)

    Amonkar, C.P.; Tilve, S.G.; Parameswaran, P.S.

    A convenient three-step synthetic approach towards 3-alkyl-5-methyl-2[5H]furanones is described. The steps involved in the synthesis are domino primary alcohol oxidation-Wittig reaction, acid-catalysed lactonisation and isomerisation. This synthetic...

  5. Synthesis, characterization and antiproliferative activity of β-aryl-δ-iodo-γ-lactones

    Science.gov (United States)

    Wzorek, Alicja; Gawdzik, Barbara; Gładkowski, Witold; Urbaniak, Mariusz; Barańska, Anita; Malińska, Maura; Woźniak, Krzysztof; Kempińska, Katarzyna; Wietrzyk, Joanna

    2013-09-01

    A convenient pathway for the synthesis of new of β-aryl-δ-iodo-γ-lactones is described. The synthetic route led to both cis and trans isomers which were separated by column chromatography or crystallization. The structures of synthesized compounds were confirmed by spectroscopic methods: IR, NMR and HR-MS. For lactones with naphthyl ring (6e and 7e) the crystal structures were also obtained. The lactones were screened for biological evaluation against cancer line HL-60 (human promyelocytic leukemia). The tests showed that the presence of substituent at the benzene ring does not significantly affect the antiproliferative activity of the compound.

  6. Electrochemical reaction rates in a dye-sensitised solar cell - the iodide/tri-iodide redox system

    DEFF Research Database (Denmark)

    Bay, L.; West, K.; Winther-Jensen, B.;

    2006-01-01

    The electrochemical reaction rate of the redox couple iodide/tri-iodide in acetonitrile is characterised by impedance spectroscopy. Different electrode materials relevant for the function of dye-sensitised solar cells (DSSC) are investigated. Preferably, the reaction with the iodide/tri-iodide co......The electrochemical reaction rate of the redox couple iodide/tri-iodide in acetonitrile is characterised by impedance spectroscopy. Different electrode materials relevant for the function of dye-sensitised solar cells (DSSC) are investigated. Preferably, the reaction with the iodide......), and polyaniline (PANI)-all deposited onto fluorine-doped tin oxide (FTO) glass. Both Pt and PEDOT are found to have sufficiently high catalytic activities for practical use as counter electrodes in DSSC. The reaction resistance on FTO and anatase confirmed the beneficial effect of a compact anatase layer on top...

  7. Synthesis of O-glycosyl α-aryl nitrones

    Institute of Scientific and Technical Information of China (English)

    Ying Fu; Huai Yuan Zhang; Yan Hua Liu; Xue Feng Li; Dan Feng Huang; Yu Lai Hu

    2010-01-01

    α-Aryl nitrone are one of the most useful kinds of nitrones and have been extensively explored in recent years.However,the sugar moieties have not been introduced into these molecules before.We presented here an efficient synthesis of α-aryl nitrone O-glycosides via condensation of N-substituted hydroxylamine and aryl aldehydes glycosides in benzene.

  8. Palladium catalyzed C3-arylation of 4-hydroxy-2-pyridones.

    Science.gov (United States)

    Anagnostaki, Elissavet E; Fotiadou, Anna D; Demertzidou, Vera; Zografos, Alexandros L

    2014-07-01

    The direct arylation of N-substituted-4-hydroxy-2-pyridones with aryl boronic acids has been achieved under palladium catalysis. The mild reaction conditions applied in this method and the use of a conventional catalytic system offer an attractive protocol for the efficient synthesis of a variety of 3-arylated products.

  9. Convenience: Så tag på gourmetrestaurant

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    2006-01-01

    . Maden bliver serveret for en. Drikkevarerne bliver skænket op. De snavsede tallerkner bliver ryddet væk. Selv servietten bliver foldet ud og lagt på ens skød. Er det ikke det, De forbinder med convenience food? Hvad er det så - pulverkaffe, kagemiks, lørdagskylling? Eller pølsevogn og burgere, når det......Vil De have en særlig oplevelse med convenience food? Så vil jeg anbefale, at De booker et bord på en gourmet-restaurant og bestiller en menu surprise med en tilsvarende vinmenu. Så behøver man slet ikke at lave mad. Man behøver ikke engang at tænke over, hvad man ønsker at spise eller drikke...

  10. Composition and properties of thallium mercury iodide

    Science.gov (United States)

    Kennedy, John H.; Schaupp, Christopher; Yang, Yuan; Zhang, Zhengming; Novinson, Thomas; Hoffard, Theresa

    1990-10-01

    Conflicting reports exist in the literature concerning the composition of thallium mercury iodide. Solid state synthesis with HgI 2 and TlI has been reported to give Tl 4HgI 6 while synthesis from solution has been reported to give Tl 2HgI 4. In this report we show that the "orange compound" precipitating from solution is actually a 1:1 mole ratio mixture of Tl 4HgI 6 and HgI 2. Pure Tl 4HgI 6, which is yellow, can be produced by heating the mixture at 100°C for several days to volatilize HgI 2 or more simply, by adding Tl(I) to a solution containing 2:1 KI:K 2HgI 4 to provide the additional iodide ions needed for Tl 4HgI 6. Tl 4HgI 6, unlike Ag 2HgI 4 and Cu 2HgI 4, has no sharp thermochromic changes and has no measurable ionic conductivity. This provides another example of the significant role the metal ion plans in determining structure and properties of metal mercury iodide compounds.

  11. Formation of cyanogen iodide by lactoperoxidase.

    Science.gov (United States)

    Schlorke, Denise; Flemmig, Jörg; Birkemeyer, Claudia; Arnhold, Jürgen

    2016-01-01

    The haem protein lactoperoxidase (LPO) is an important component of the anti-microbial immune defence in external secretions and is also applied as preservative in food, oral care and cosmetic products. Upon oxidation of SCN(-) and I(-) by the LPO-hydrogen peroxide system, oxidised species are formed with bacteriostatic and/or bactericidal activity. Here we describe the formation of the inter(pseudo)halogen cyanogen iodide (ICN) by LPO. This product is formed when both, thiocyanate and iodide, are present together in the reaction mixture. Using (13)C nuclear magnetic resonance spectroscopy and gas chromatography-mass spectrometry we could identify this inter(pseudo)halogen after applying iodide in slight excess over thiocyanate. The formation of ICN is based on the reaction of oxidised iodine species with thiocyanate. Further, we could demonstrate that ICN is also formed by the related haem enzyme myeloperoxidase and, in lower amounts, in the enzyme-free system. As I(-) is not competitive for SCN(-) under physiologically relevant conditions, the formation of ICN is not expected in secretions but may be relevant for LPO-containing products.

  12. A mild and simple synthesis of N-aryl substituted toluenesulfamides under solvent-free conditions

    Institute of Scientific and Technical Information of China (English)

    ZHAO Na; WANG Yu-lu

    2004-01-01

    N- aryl substituted benzenesulfamides are often used as heating-sensitive recording material1, thermal printing material2, sensitizer3 and developer4. Moreover, some of the benzenesulfamides have antifungal activities5. Many methods have been described for preparation of sulfamides. They are used to carry out in solvent8 or in solid phase condition9. These methods required solvent or solid support and even required heating or cooling. At the same time, the process of these methods is complex. Now we have developed a new method to prepare N-aryl substituted toluenesulfamides under solvent-free conditions.In recent years, solvent-free technology has gained popularity in organic synthesis. For instance,solidstate reaction and microwave reaction have received considerable attention. Solvent-free synthesis of amides has been reported10-11. This technology has many advantages such as high efficiency and selectivity, easy separation and environmental acceptability. All these merits are in accord with green chemistry's requirements of energy-saving, high efficiency and environmental benefits.In our paper, we used a simple and efficient method for preparing N-aryl substituted toluenesulfamides under solvent-free conditions, as a replacement for classic solvent, which gives many environmental benefits.All reactions were completed at room temperature by co-grinding in an agate mortar for 3-20min and the results are shown in Table 1.In conclusion, we have developed an efficient and convenient method of preparation N-aryl substituted toluenesulfamides in high yields. It symbols an improvement for synthesis of benzenesulfamides.

  13. The Synthesis of 1-Aryl-5-Fluorouracil

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A series of new type substituted 5-fluorouracil derivatives, 1-aryl-5-fluorouracil (4a-4f), were synthesized via diaryliodonium salts and the structure of the title compound was finally confirmed by IR, UV, 1H-NMR, MS and CHN analysis.

  14. Effect of nitrogen and oxygen on radiolysis of iodide solution

    Energy Technology Data Exchange (ETDEWEB)

    Karasawa, H.; Endo, M. [Hitachi Ltd., Power and Industrial System R+D Divisions, Ibaraki (Japan)

    1996-12-01

    The effect of nitrogen and oxygen on radiolysis of iodide solution was examined. Direct decomposition of nitrogen by {gamma}-radiation produced nitric acid to decrease a water pH. This resulted in the iodine formation in the radiolysis of iodide solution. Hydrogen peroxide was produced by the radiolysis of water containing oxygen. This worked a reducing agent to suppress the formation of iodine in the radiolysis of iodide solution. In the analytical model, fourteen iodine species were considered and reaction scheme consisted in 124 reactions. The analytical model could estimate the oxidation state of iodide ions. (author) 4 figs., 4 refs.

  15. Mercuric Iodide Anticoincidence Shield for Gamma-Ray Spectrometer Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We utilize a new detector material, polycrystalline mercuric iodide, for background suppression by active anticoincidence shielding in gamma-ray spectrometers. Two...

  16. Mercuric Iodide Anticoincidence Shield for Gamma-Ray Spectrometer Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to utilize a new detector material, polycrystalline mercuric iodide, for background suppression by active anticoincidence shielding in gamma-ray...

  17. Europium-doped barium bromide iodide

    Energy Technology Data Exchange (ETDEWEB)

    Gundiah, Gautam; Hanrahan, Stephen M.; Hollander, Fredrick J.; Bourret-Courchesne, Edith D.

    2009-10-21

    Single crystals of Ba0.96Eu0.04BrI (barium europium bromide iodide) were grown by the Bridgman technique. The title compound adopts the ordered PbCl2 structure [Braekken (1932). Z. Kristallogr. 83, 222-282]. All atoms occupy the fourfold special positions (4c, site symmetry m) of the space group Pnma with a statistical distribution of Ba and Eu. They lie on the mirror planes, perpendicular to the b axis at y = +-0.25. Each cation is coordinated by nine anions in a tricapped trigonal prismatic arrangement.

  18. Novel mercuric iodide polycrystalline nuclear particles counters

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M. [Hebrew Univ. of Jerusalem (Israel)]|[Sandia National Lab., Livermore, CA (United States); Zuck, A.; Braiman, M.; Nissenbaum, J. [Hebrew Univ. of Jerusalem (Israel)] [and others

    1996-12-31

    Polycrystalline mercuric iodide nuclear radiation detectors having areas between 0.01 to 100 cm{sup 2} and thicknesses 30 to 600 microns, have been fabricated with single, linear strip and square pixel contact. The large area detectors 10 to 600 cm{sup 2} were produced by industrial ceramic equipment while the smaller ones, about 1 cm{sup 2} area, were produced in the laboratory. The large detectors still had large leakage currents and the production process is being revised. The smaller detectors were tested and their response to lower and higher gamma energy, beta and even 100 GeV muons at CERN will be reported.

  19. Large-area mercuric iodide photodetectors

    International Nuclear Information System (INIS)

    This article discusses the limits of the active area of mercuric iodide photodetectors imposed by the size of available crystals, electronic noise, and the uniformity of charge carrier collection. Theoretical calculations of the photodetector electronic noise are compared with the experimental results. Different entrance contacts were studied including semitransparent palladium films and conductive liquids. HgI2 photodetectors with active area up to 4 sq cm are matched with NaI(Tl) and CsI(Tl) scintillation crystals and are evaluated as gamma radiation spectrometers

  20. Transfer of the human sodium/iodide symporter gene enhances iodide uptake in melanoma cells

    International Nuclear Information System (INIS)

    Objective: To obtain human sodium/iodide symporter (hNIS) cDNA and to study its biological property and potential use as a therapeutic radioiodide for melanoma. Methods: hNIS gene cDNA was amplified with total RNA from human thyroid tissue by RT-PCR. The hNIS cDNA was inserted into cloning vector pUCm-T and subcloned into eukaryotic expression vector pcDNA3. The recombinant plasmid pcDNA3-hNIS was introduced into B16 cells using the electroporation technique. The uptake and efflux of iodide was examined in vitro. Results: The cloned hNIS cDNA sequence was identical to the published sequence. Two novel cell lines named B16-A containing hNIS and B16-B containing pcDNA3 only were established. The resultant cell line B16-A accumulated 17 and 19 times more radioiodide in vitro than B16 and B16-B did, respectively. However the efflux of iodide from B16-A was also rapid ( T1/2=10 min). Conclusions: Our preliminary data indicate that the transduction of the hNIS gene per se is sufficient to induce iodide transport in melanoma cells in vitro, but its T1/2 is short. With regard to therapeutic application, however, further investigation is necessary so as to develop a method of maintaining more radioiodide in the cells for long enough to produce greater therapeutic effects

  1. Production of Molecular Iodine and Tri-iodide in the Frozen Solution of Iodide: Implication for Polar Atmosphere.

    Science.gov (United States)

    Kim, Kitae; Yabushita, Akihiro; Okumura, Masanori; Saiz-Lopez, Alfonso; Cuevas, Carlos A; Blaszczak-Boxe, Christopher S; Min, Dae Wi; Yoon, Ho-Il; Choi, Wonyong

    2016-02-01

    The chemistry of reactive halogens in the polar atmosphere plays important roles in ozone and mercury depletion events, oxidizing capacity, and dimethylsulfide oxidation to form cloud-condensation nuclei. Among halogen species, the sources and emission mechanisms of inorganic iodine compounds in the polar boundary layer remain unknown. Here, we demonstrate that the production of tri-iodide (I3(-)) via iodide oxidation, which is negligible in aqueous solution, is significantly accelerated in frozen solution, both in the presence and the absence of solar irradiation. Field experiments carried out in the Antarctic region (King George Island, 62°13'S, 58°47'W) also showed that the generation of tri-iodide via solar photo-oxidation was enhanced when iodide was added to various ice media. The emission of gaseous I2 from the irradiated frozen solution of iodide to the gas phase was detected by using cavity ring-down spectroscopy, which was observed both in the frozen state at 253 K and after thawing the ice at 298 K. The accelerated (photo-)oxidation of iodide and the subsequent formation of tri-iodide and I2 in ice appear to be related with the freeze concentration of iodide and dissolved O2 trapped in the ice crystal grain boundaries. We propose that an accelerated abiotic transformation of iodide to gaseous I2 in ice media provides a previously unrecognized formation pathway of active iodine species in the polar atmosphere.

  2. Phase 2 Methyl Iodide Deep-Bed Adsorption Tests

    Energy Technology Data Exchange (ETDEWEB)

    Soelberg, Nick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Watson, Tony [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    Nuclear fission produces fission products (FPs) and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Research, demonstrations, and some reprocessing plant experience have indicated that diatomic iodine can be captured with efficiencies high enough to meet regulatory requirements. Research on the capture of organic iodides has also been performed, but to a lesser extent. Several questions remain open regarding the capture of iodine bound in organic compounds. Deep-bed methyl iodide adsorption testing has progressed according to a multi-laboratory methyl iodide adsorption test plan. This report summarizes the second phase of methyl iodide adsorption work performed according to this test plan using the deep-bed iodine adsorption test system at the Idaho National Laboratory (INL), performed during the second half of Fiscal Year (FY) 2014. Test results continue to show that methyl iodide adsorption using AgZ can achieve total iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) above 1,000, until breakthrough occurred. However, mass transfer zone depths are deeper for methyl iodide adsorption compared to diatomic iodine (I2) adsorption. Methyl iodide DFs for the Ag Aerogel test adsorption efficiencies were less than 1,000, and the methyl iodide mass transfer zone depth exceeded 8 inches. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption under various conditions specified in the methyl iodide test plan, and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

  3. Multimetallic catalysed cross-coupling of aryl bromides with aryl triflates

    Science.gov (United States)

    Ackerman, Laura K. G.; Lovell, Matthew M.; Weix, Daniel J.

    2015-08-01

    The advent of transition-metal catalysed strategies for forming new carbon-carbon bonds has revolutionized the field of organic chemistry, enabling the efficient synthesis of ligands, materials, and biologically active molecules. In cases where a single metal fails to promote a selective or efficient transformation, the synergistic cooperation of two distinct catalysts--multimetallic catalysis--can be used instead. Many important reactions rely on multimetallic catalysis, such as the Wacker oxidation of olefins and the Sonogashira coupling of alkynes with aryl halides, but this approach has largely been limited to the use of metals with distinct reactivities, with only one metal catalyst undergoing oxidative addition. Here, we demonstrate that cooperativity between two group 10 metal catalysts--(bipyridine)nickel and (1,3-bis(diphenylphosphino)propane)palladium--enables a general cross-Ullmann reaction (the cross-coupling of two different aryl electrophiles). Our method couples aryl bromides with aryl triflates directly, eliminating the use of arylmetal reagents and avoiding the challenge of differentiating between multiple carbon-hydrogen bonds that is required for direct arylation methods. Selectivity can be achieved without an excess of either substrate and originates from the orthogonal reactivity of the two catalysts and the relative stability of the two arylmetal intermediates. While (1,3-bis(diphenylphosphino)propane)palladium reacts preferentially with aryl triflates to afford a persistent intermediate, (bipyridine)nickel reacts preferentially with aryl bromides to form a transient, reactive intermediate. Although each catalyst forms less than 5 per cent cross-coupled product in isolation, together they are able to achieve a yield of up to 94 per cent. Our results reveal a new method for the synthesis of biaryls, heteroaryls, and dienes, as well as a general mechanism for the selective transfer of ligands between two metal catalysts. We anticipate that this

  4. The use of mercuric iodide in instruments for safeguards and non-proliferation applications

    International Nuclear Information System (INIS)

    Mercuric Iodide is a material exceptionally suited for solid state detectors operating at room temperature. The high density and the high atomic numbers of the constituent elements provide a large absorption factor and a high full-energy-peak efficiency at gamma ray energies. The large electronic bandgap results in a very high resistivity and therefore a low leakage current at temperatures within and outside the personal comfort range. Constellation Technology has developed the technology to grow large, high quality crystals from mercuric iodide. Spectrometry grade detectors with dimensions of 25 mm x 25 mm x 3 mm and with an energy resolution of approximately 3% FWHM at 662 keV can be fabricated from these mercuric iodide crystals. The resolution of this detector approximately 1.8% FWHM and the peak-to-valley ratio is larger than twelve. Standard semi-Gaussian processing and no pulse-shape discrimination was used. These detectors can be conveniently incorporated into hand-held instruments to detect weak sources or heavily shielded sources. Previous measurements have shown that the Minimum Detectable Activity (MDA) of a 3 mm thick mercuric iodide detector with dimensions as given above is about 10% less than the MDA of a 50 mm x 50 mm sodium iodide detector, due to the superior energy resolution. Software methods are being developed to improve the identification of weak sources against a large background. Results of these measurements will be presented. Smaller detectors can be used in safeguards applications where the intensity of the radiation is relatively high. The spectral resolution of the detectors is high enough to clearly identify the significant energy lines in the spectra of stored uranium and plutonium. The shape of the spectral peaks is constant over a large range of energies so that existing software systems can be used to analyze the spectra. The small size, ruggedness, temperature stability and high efficiency of these detectors makes them good

  5. Ligand-Mediated and Copper-Catalyzed C(sp3)-H Bond Functionalization of Aryl Ketones with Sodium Sulfinates under Mild Conditions

    Science.gov (United States)

    Lan, Xing-Wang; Wang, Nai-Xing; Bai, Cui-Bing; Zhang, Wei; Xing, Yalan; Wen, Jia-Long; Wang, Yan-Jing; Li, Yi-He

    2015-12-01

    A novel and convenient copper (II) bromide and 1,8-diazabicyclo[5.4.1]undec-7-ene (DBU) or 1,10-phenanthroline catalysis protocol for the construction of α-alkyl-β-keto sulfones via C(sp3)-H bond functionalization followed by C(sp3)-S bond formation between aryl ketones and sodium sulfinates at room temperature has been developed. This method is applicable to a wide range of aryl ketones and sodium sulfinates. The electronic effects of aryl ketones and ligands effects of the copper salts are crucial for this transformation. Typically, substituted aryl ketones with electron-withdrawing group do not need any ligand to give a good to excellent yield, while substituted aryl ketones with electron-donating group and electron-rich heteroaromatic ketones offer a good to excellent yield only under the nitrogen-based ligands. The practical value of this transformation highlights the efficient and robust one-pot synthesis of α-alkyl-β-keto sulfones.

  6. Dissolution of gaseous methyl iodide into aqueous sodium hydroxide solutions

    International Nuclear Information System (INIS)

    Absorption process of gaseous methyl iodide by water or sodium hydroxide solutions was investigated using a semi-flow type experimental apparatus by measuring the concentration of all measurable chemical species in both the gas and the liquid phase. The experimental temperature ranged from 288 to 311 K and the gaseous methyl iodide and aqueous sodium hydroxide concentrations were approximately 0.6 x 10-3 to 7 x 10-3 and 0 to 0.2 mol/dm3, respectively. It is estimated that the dissolution of methyl iodide into the sodium hydroxide solution proceeds according to the following steps. Step (1) Methyl iodide in air dissolves physically into the aqueous phase. Physical dissolution process obeys Henry's law. Step (2) Methyl iodide dissolved into the aqueous phase is decomposed by a base catalytic hydrolysis and produces methyl alcohol and iodide ion. The equilibrium constants of physical dissolution were obtained from the steady concentration in both the gas and the liquid phases in the semi-flow type experiment because the hydrolysis reaction rate of methyl iodide is very slow in comparison with the physical dissolution in this experimental conditions. The obtained value of the standard heat of solution of methyl iodide into water was 7.2 kcal/mol. Salting-out effect was observed when the concentration of sodium hydroxide in the absorbent was over 0.01 mol/dm3. (auth.)

  7. Synthesis of novel 5-alkyl/aryl/heteroaryl substituted diethyl 3,4-dihydro-2H-pyrrole-4,4-dicarboxylates by aziridine ring expansion of 2-[(aziridin-1-yl-1-alkyl/aryl/heteroaryl-methylene]malonic acid diethyl esters

    Directory of Open Access Journals (Sweden)

    U. K. Syam Kumar

    2011-06-01

    Full Text Available A novel synthetic methodology has been developed for the synthesis of diethyl 5-alkyl/aryl/heteroaryl substituted 3,4-dihydro-2H-pyrrole-4,4-dicarboxylates (also called 2-substituted pyrroline-4,5-dihydro-3,3-dicarboxylic acid diethyl esters by iodide ion induced ring expansion of 2-[(aziridin-1-yl-1-alkyl/aryl/heteroaryl-methylene]malonic acid diethyl esters in very good to excellent yields under mild reaction conditions. The electronic and steric impact of the substituents on the kinetics of ring expansion of N-vinyl aziridines to pyrrolines has been studied. Various diversely substituted novel pyrroline derivatives have been synthesized by this methodology and the products can be used as key intermediates in the synthesis of substituted pyrrolines, pyrroles and pyrrolidines.

  8. C(aryl)-O Bond Formation from Aryl Methanesulfonates via Consecutive Deprotection and SNAr Reactions with Aryl Halides in an Ionic Liquid

    OpenAIRE

    Yang Chen; Hui Xu

    2007-01-01

    An efficient K3PO4-mediated synthesis of unsymmetrical diaryl ethers using the ionic liquid [Bmim]BF4 (1-butyl-3-methylimidazolium tetrafluoroborate) as solvent has been developed. The procedure involves consecutive deprotection of aryl methane-sulfonates and a nucleophilic aromatic substitution (SNAr) with activated aryl halides.

  9. 1-Heptanesulfonic acid sodium salt: One pot efficient synthesis of 2-aryl- 1-arylmethyl-1H-1,3-benzo [d]imidazoles

    Institute of Scientific and Technical Information of China (English)

    Ganesh R.Jadhav; Mohammad U.Shaikh; Rajesh P.Kale; Charansingh H.Gill

    2009-01-01

    Synthesis of 2-aryl-1-arylmethyl-1H-1,3-benzo[d]imidazoles by the reaction of o-phenylenediamine with substituted aromatic aldehydes in the presence of l-heptanesulfonic acid sodium salt (10 mol%) at room temperature.The reactions were performed in acetonitrile:water (8:2).The method was proved to be eco-friendly,convenient and the products were isolated with good yields (82-90%).

  10. Fluoroalkylation of aryl ether perfluorocyclobutyl polymers

    OpenAIRE

    Ligon, Clark; Ameduri, Bruno; Boutevin, Bernard; Smith, Dennis

    2008-01-01

    Post functionalization of aryl ether perfluorocyclobutyl (PFCB) polymers with fluoroalkyl side chains was accomplished with Umemoto's FITS reagents. The fluoroalkylated PFCB polymers (20 % functionalized) showed increases in both hydrophobicity and oleophobicity. Static contact angle for hexadecane was increased after fluoroalkylation from 0° to greater than 30° for the two PFCB polymers tested. Increased oil repellency makes these materials potential candidates for various coatings applicati...

  11. Aryl Hydrocarbon Receptor Control of Adaptive Immunity

    OpenAIRE

    Quintana, Francisco J.; David H. Sherr

    2013-01-01

    The aryl hydrocarbon receptor (AhR) is a ligand-activated transcription factor that belongs to the family of basic helix-loop-helix transcription factors. Although the AhR was initially recognized as the receptor mediating the pathologic effects of dioxins and other pollutants, the activation of AhR by endogenous and environmental factors has important physiologic effects, including the regulation of the immune response. Thus, the AhR provides a molecular pathway through which environmental f...

  12. Palladium-Catalyzed Arylation of Fluoroalkylamines

    Science.gov (United States)

    Brusoe, Andrew T.; Hartwig, John F.

    2015-01-01

    We report the synthesis of fluorinated anilines by palladium-catalyzed coupling of fluoroalkylamines with aryl bromides and aryl chlorides. The products of these reactions are valuable because anilines typically require the presence of an electron-withdrawing substituent on nitrogen to suppress aerobic or metabolic oxidation, and the fluoroalkyl groups have steric properties and polarity distinct from those of more common electron-withdrawing amide and sulfonamide units. The fluoroalkylaniline products are unstable under typical conditions for C–N coupling reactions (heat and strong base). However, the reactions conducted with the weaker base KOPh, which has rarely been used in cross-coupling to form C–N bonds, occurred in high yield in the presence of a catalyst derived from commercially available AdBippyPhos and [Pd(allyl)Cl]2. Under these conditions, the reactions occur with low catalyst loadings (<0.50 mol % for most substrates) and tolerate the presence of various functional groups that react with the strong bases that are typically used in Pd-catalyzed C–N cross-coupling reactions of aryl halides. The resting state of the catalyst is the phenoxide complex, (BippyPhosPd(Ar)OPh); due to the electron-withdrawing property of the fluoroalkyl substituent, the turnover-limiting step of the reaction is reductive elimination to form the C–N bond. PMID:26065341

  13. Novel mercuric iodide polycrystalline nuclear particle counters

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M. [Hebrew Univ. of Jerusalem (Israel)]|[Sandia National Labs., Livermore, CA (United States); Zuck, A.; Braiman, M.; Nissenbaum, J. [Hebrew Univ. of Jerusalem (Israel); Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L. [LEPSI, Strasbourg (France)

    1997-12-01

    Polycrystalline mercuric iodide nuclear radiation detectors have been produced in a novel technology. Unlike the normal single-crystal technology, there is no intrinsic limit to the surface on which these detectors can be produced. Detectors with areas up to about 1.5 cm{sup 2}, thicknesses from 30 to 600 {micro}m, and with single electrodes as well as microstrip and pixel contacts have been fabricated and successfully tested with photons in the range of 40--660 keV, {beta} particle`s emitted from a Sr-Y source, and high energy (100 GeV) muons. Results on both charge collection and counting efficiency are reported as well as some very preliminary imaging results. The experimental results on charge collection have been compared with simulation, and a combined {mu}{tau} product 10{sup {minus}7} cm{sup 2}/V for electrons has been estimated.

  14. Ferroelastic Fingerprints in Methylammonium Lead Iodide Perovskite

    KAUST Repository

    Hermes, Ilka M.

    2016-02-12

    Methylammonium lead iodide (MAPbI3) perovskite materials show an outstanding performance in photovoltaic devices. However, certain material properties, especially the possible ferroic behavior, remain unclear. We observed distinct nanoscale periodic domains in the piezoresponse of MAPbI3(Cl) grains. The structure and the orientation of these striped domains indicate ferroelasticity as their origin. By correlating vertical and lateral piezoresponse force microscopy experiments performed at different sample orientations with x-ray diffraction, the preferred domain orientation was suggested to be the a1-a2-phase. The observation of these ferroelastic fingerprints appears to strongly depend on the film texture and thus the preparation route. The formation of the ferroelastic twin domains could be induced by internal strain during the cubic-tetragonal phase transition.

  15. Cervical cytology screening convenient for the workforce.

    Science.gov (United States)

    Andren, S M

    1991-01-01

    The study describes the demographic details and smear results of women attending a Well Woman Clinic in an Occupational Health setting over a two year period. The clinic is located close to the place of work, run during working hours, and operated by a doctor and nurse. Charging fees acceptable to women attending or their employers, the service has made a modest profit and offers scope for increasing the income against fixed costs. The age range attending is older than commonly found at screening clinics. The abnormal smear detection rate, 115 per 1000 is high while the proportion of inadequate results at 50 per 1000 compares favourably with other clinics. In an area with 13 per cent Asian population, only 5 per cent of attenders were Asian but of these one fifth had abnormal smears. A cervical cytology screening facility timed and located for the convenience of the working woman is found to attract a group of women in the older age range who have a high abnormal smear rate, and those who fail to attend elsewhere. PMID:1779673

  16. Conserved charged amino acid residues in the extracellular region of sodium/iodide symporter are critical for iodide transport activity

    Directory of Open Access Journals (Sweden)

    Liang Ji-An

    2010-11-01

    Full Text Available Abstract Background Sodium/iodide symporter (NIS mediates the active transport and accumulation of iodide from the blood into the thyroid gland. His-226 located in the extracellular region of NIS has been demonstrated to be critical for iodide transport in our previous study. The conserved charged amino acid residues in the extracellular region of NIS were therefore characterized in this study. Methods Fourteen charged residues (Arg-9, Glu-79, Arg-82, Lys-86, Asp-163, His-226, Arg-228, Asp-233, Asp-237, Arg-239, Arg-241, Asp-311, Asp-322, and Asp-331 were replaced by alanine. Iodide uptake abilities of mutants were evaluated by steady-state and kinetic analysis. The three-dimensional comparative protein structure of NIS was further modeled using sodium/glucose transporter as the reference protein. Results All the NIS mutants were expressed normally in the cells and targeted correctly to the plasma membrane. However, these mutants, except R9A, displayed severe defects on the iodide uptake. Further kinetic analysis revealed that mutations at conserved positively charged amino acid residues in the extracellular region of NIS led to decrease NIS-mediated iodide uptake activity by reducing the maximal rate of iodide transport, while mutations at conserved negatively charged residues led to decrease iodide transport by increasing dissociation between NIS mutants and iodide. Conclusions This is the first report characterizing thoroughly the functional significance of conserved charged amino acid residues in the extracellular region of NIS. Our data suggested that conserved charged amino acid residues, except Arg-9, in the extracellular region of NIS were critical for iodide transport.

  17. N-Heterocyclic carbene–palladium catalysts for the direct arylation of pyrrole derivatives with aryl chlorides

    Directory of Open Access Journals (Sweden)

    Ismail Özdemir

    2013-02-01

    Full Text Available New Pd–NHC complexes have been synthesized and employed for palladium-catalyzed direct arylation of pyrrole derivatives by using electron-deficient aryl chlorides as coupling partners. The desired coupling products were obtained in moderate to good yields by using 1 mol % of these air-stable palladium complexes. This is an advantage compared to the procedures employing air-sensitive phosphines, which have been previously shown to promote the coupling of aryl chlorides with heteroarenes.

  18. Palladium-catalyzed cross-coupling reactions of aryl boronic acids with aryl halides in water.

    Science.gov (United States)

    Wang, Shaoyan; Zhang, Zhiqiang; Hu, Zhizhi; Wang, Yue; Lei, Peng; Chi, Haijun

    2009-01-01

    An efficient Suzuki cross-coupling reaction using a variety of aryl halides in neat water was developed. The Pd-catalyzed reaction between aryl bromides or chlorides and phenyl boronic acids was compatible with various functional groups and affords biphenyls in good to excellent yields without requirement of organic cosolvents. The air stability and solubility in water of the palladium-phosphinous acid complexes were considered to facilitate operation of the coupling reaction and product isolation. The reaction conditions including Pd catalyst selection, temperature, base and catalyst recoverability were also investigated. PMID:25084408

  19. The stochastic seasonal behavior of energy commodity convenience yields

    International Nuclear Information System (INIS)

    This paper contributes to the commodity pricing literature by consistently modeling the convenience yield with its empirically observed properties. Specifically, in this paper, we show how a four-factor model for the stochastic behavior of commodity prices, with two long- and short-term factors and two additional seasonal factors, may accommodate some of the most important empirically observed characteristics of commodity convenience yields, such as the mean reversion and stochastic seasonality. Based on this evidence, a theoretical model is presented and estimated to characterize the commodity convenience yield dynamics that are consistent with previous findings. We also show that commodity price seasonality is better estimated through convenience yields than through futures prices. - Highlights: • Energy commodity convenience yields exhibit mean reversion and stochastic seasonality. • We present a model for convenience yields accounting for their observed characteristics. • Commodity price seasonality is better estimated through convenience yields

  20. Just how convenient is convenience? An empirical study of the associations between perceived convenience, meal preparation activities and ready meals' characteristics

    DEFF Research Database (Denmark)

    Costa, Ana I.A.; Ruijschop, R. M. A. J.

    2006-01-01

    activities and technological attributes of frozen pizzas. Ninety-eight Dutch meal preparers, 18-29 years old, were asked to rate expected convenience attributes of frozen pizzas; (2) prepare and consume these pizzas in a home-like setting; (3) rate experienced convenience after consumption. Pizzas were also...

  1. Stereoselective synthesis of tricyclic compounds by intramolecular palladium-catalyzed addition of aryl iodides to carbonyl groups

    Science.gov (United States)

    Saadi, Jakub; Bentz, Christoph; Redies, Kai; Lentz, Dieter; Zimmer, Reinhold

    2016-01-01

    Summary Starting from γ-ketoesters with an o-iodobenzyl group we studied a palladium-catalyzed cyclization process that stereoselectively led to bi- and tricyclic compounds in moderate to excellent yields. Four X-ray crystal structure analyses unequivocally defined the structure of crucial cyclization products. The relative configuration of the precursor compounds is essentially transferred to that of the products and the formed hydroxy group in the newly generated cyclohexane ring is consistently in trans-arrangement with respect to the methoxycarbonyl group. A transition-state model is proposed to explain the observed stereochemical outcome. This palladium-catalyzed Barbier-type reaction requires a reduction of palladium(II) back to palladium(0) which is apparently achieved by the present triethylamine. PMID:27559374

  2. Cross—Coupling of Aryl Iodides with Malononitrile Catalyzed by Palladium N—Heterocyclic Carbene Complex System

    Institute of Scientific and Technical Information of China (English)

    高诚伟; 陶晓春; 等

    2002-01-01

    Eight N-heterocyclic carbenes (NHC),generated in situ from their imidazolium salts,as ligands of palladium complexes were used for the catalytic coupling of iodobenzene with malononi-trile anion,It was found that 1,3-bis(2,4,6-trimethylphenyl)-imidazolium chloride (IMesHCl)-Pd2(dba)3 catalytic system has the highest activity to obtain phenyl malononitrile among the imidazolium salts.The substituted iodoarenes reacted with malononitrile anions by using the catalytic system to give cross-coupling products in yields from 50% to 96%.

  3. Cross-Coupling of Aryl Iodides with Malononitrile Catalyzed by Palladium N-Heterocyclic Carbene Complex System

    Institute of Scientific and Technical Information of China (English)

    GAO,Cheng-Wei(高诚伟); TAO,Xiao-Chun(陶晓春); LIU,Tao-Ping(刘涛平); HUANG,Ji-Ling(黄吉玲); QIAN,Yan-Long(钱延龙)

    2002-01-01

    Eight N-heterocyclic carbenes (NHC), generated in situ from their imidazolium salts, as ligands of palladium complexes were used for the catalytic coupling of iodobenzene with malononitrile anion. It was found that 1,3-bis(2,4,6-trimethylphenyl)imidazolium chloride (IMesHC1)-Pd2(dba)3 catalytic system has the highest activity to obtain phenyl malononitrile among the imidazolium salts. The substituted iodoarenes reacted with malononitrile anions by using the catalytic system to give crosscoupling products in yields from 50% to 96%.

  4. The Effect on Sodium/Iodide Symporter and Pendrin in Thyroid Colloid Retention Developed by Excess Iodide Intake.

    Science.gov (United States)

    Chen, Xiao-Yi; Lin, Chu-Hui; Yang, Li-Hua; Li, Wang-Gen; Zhang, Jin-Wei; Zheng, Wen-Wei; Wang, Xiang; Qian, Jiang; Huang, Jia-Luan; Lei, Yi-Xiong

    2016-07-01

    It is well known that excess iodide can lead to thyroid colloid retention, a classic characteristic of iodide-induced goiter. However, the mechanism has not been fully unrevealed. Iodide plays an important role in thyroid function at multiple steps of thyroid colloid synthesis and transport among which sodium/iodide symporter (NIS) and pendrin are essential. In our study, we fed female BALB/c mice with different concentrations of high-iodine water including group A (control group, 0 μg/L), group B (1500 μg/L), group C (3000 μg/L), group D (6000 μg/L), and group E (12,000 μg/L). After 7 months of feeding, we found that excess iodide could lead to different degrees of thyroid colloid retention. Besides, NIS and pendrin expression were downregulated in the highest dose group. The thyroid iodide intake function detected by urine iodine assay and thyroidal (125)I experiments showed that the urine level of iodine increased, while the iodine intake rate decreased when the concentration of iodide used in feeding water increased (all p control group). In addition, transmission electron microscopy (TEM) indicated a reduction in the number of intracellular mitochondria of thyroid cells. Based on these findings, we concluded that the occurrence of thyroid colloid retention exacerbated by excess iodide was associated with the suppression of NIS and pendrin expression, providing an additional insight of the potential mechanism of action of excess iodide on thyroid gland. PMID:26660892

  5. A New Route to Azafluoranthene Natural Products via Direct Arylation

    OpenAIRE

    Ponnala, Shashikanth; Harding, Wayne W.

    2013-01-01

    Microwave-assisted direct arylation was successfully employed in the synthesis of azafluoranthene alkaloids for the first time. Direct arylation reactions on a diverse set of phenyltetrahydroisoquinolines produces the indeno[1,2,3-ij]isoquinoline nucleus en route to a high yielding azafluoranthene synthesis.

  6. Palladium-Catalyzed alpha-Arylation of Tetramic Acids

    DEFF Research Database (Denmark)

    Storgaard, Morten; Dorwald, F. Z.; Peschke, B.;

    2009-01-01

    A mild, racemization-free, palladium-Catalyzed alpha-arylation of tetramic acids (2,4-pyrrolidinediones) has been developed. Various amino acid-derived tetramic acids were cleanly arylated by treatment with 2 mol % of Pd(OAc)(2), 4 mol % of a sterically demanding biaryl phosphine, 2.3 equiv of K2...

  7. Selective copper catalysed aromatic N-arylation in water

    DEFF Research Database (Denmark)

    Engel-Andreasen, Jens; Shimpukade, Bharat; Ulven, Trond.

    2013-01-01

    4,7-Dipyrrolidinyl-1,10-phenanthroline (DPPhen) was identified as an efficient ligand for copper catalyzed selective arom. N-arylation in water. N-Arylation of indoles, imidazoles and purines proceeds with moderate to excellent yields and complete selectivity over aliph. amines. Aq. medium and th...

  8. Expression of the human sodium/iodide symporter (hNIS) in xenotransplanted human thyroid carcinoma

    NARCIS (Netherlands)

    Smit, J.W.A.; Schröder - van der Elst, J.P.; Karperien, M.; Que, I.; Romijn, J.A.; Heide, van der D.

    2001-01-01

    The uptake of iodide in thyroid epithelial cells is mediated by the sodium/iodide symporter (NIS). The uptake of iodide is of vital importance for thyroid physiology and is a prerequisite for radioiodine therapy in thyroid cancer. Loss of iodide uptake due to diminished expression of the human NIS (

  9. Improved Stability of Mercuric Iodide Detectors for Anticoincidence Shields Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to utilize guard ring electrode structures and a new film growth technique to create improved polycrystalline mercuric iodide detectors for background...

  10. Prevention of organic iodide formation in BWR`s

    Energy Technology Data Exchange (ETDEWEB)

    Karjunen, T. [Finnish Centre for Radiation and Nuclear Safety, Helsinki (Finland); Laitinen, T.; Piippo, J.; Sirkiae, P. [VTT Manufacturing Technology (Finland)

    1996-12-01

    During an accident, many different forms of iodine may emerge. Organic iodides, such as methyl iodide and ethyl iodide, are relatively volatile, and thus their appearance leads to increased concentration of gaseous iodine. Since organic iodides are also relatively immune to most accident mitigation measures, such as sprays and filters, they can affect the accident source term significantly even when only a small portion of iodine is in organic form. Formation of organic iodides may not be limited by the amount of organic substances available. Excessive amounts of methane can be produced, for example, during oxidation of boron carbide, which is used in BWR`s as a neutron absorber material. Another important source is cable insulation. In a BWR, a large quantity of cables is placed below the pressure vessel. Thus a large quantity of pyrolyse gases will be produced, should the vessel fail. Organic iodides can be formed as a result of many different reactions, but at least in certain conditions the main reaction takes place between an organic radical produced by radiolysis and elemental iodine. A necessary requirement for prevention of organic iodide production is therefore that the pH in the containment water pools is kept high enough to eliminate formation of elemental iodine. In a typical BWR the suppression pool water is usually unbuffered. As a result, the pH may be dominated by chemicals introduced during an accident. If no system for adding basic chemicals is operable, the main factor affecting pool water pH may be hydrochloric acid released during cable degradation. Should this occur, the conditions could be very favorable for production of elemental iodine and, consequently, formation of organic iodides. Although high pH is necessary for iodine retention, it could have also adverse effects. High pH may, for example, accelerate corrosion of containment materials and alter the characteristics of the solid corrosion products. (author) 6 figs., 1 tab., 13 refs.

  11. N-Arylation of azaheterocycles with aryl and heteroaryl halides catalyzed by iminodiacetic acid resin-chelated copper complex

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Iminodiacetic acid resin-chelated copper(Ⅱ) complex is effective in cross-coupling reactions between azaheterocycles and aryl or heteroaryl halides,providing N-arylated products in good to excellent yields.The copper catalyst is air stable and can be readily recovered and reused with minimal loss of activity for three runs.

  12. A review of polytypism in lead iodide

    Energy Technology Data Exchange (ETDEWEB)

    Beckmann, P.A. [Department of Physics, Bryn Mawr College, Bryn Mawr, Pennsylvania (United States)

    2010-05-15

    Lead Iodide (PbI{sub 2}) is an important inorganic solid for both basic scientific research and possible technological applications and in this brief review we discuss the structure of PbI{sub 2}. Although the basic structure is a simple I-Pb-I layered structure with a[PbI{sub 6}]{sup 4-} near-octahedron being the basic building block, there are many ways of stacking the layers which results in many polytypes. We present 20 of the 23 entries for the structure of PbI{sub 2} from the Inorganic Structural Database and order them by polytype. This represents more than 80 years of crystallographic research in the structure of this compound. We present a simple way to view the 2H, 4H, 6H, and 6R polytypes and extend the procedure to higher-order polytypes. We note a relationship, not generally appreciated, between the distortion of the near [PbI{sub 6}]{sup 4-} octahedrons and the polytype. We suggest that the significance of vacancies has only recently been appreciated. We suggest that small discrepancies in structure determination are probably due to different distributions of vacancies and that there are, in practice, very many structures for macroscopic or even mesoscopic samples of a given polytype when vacancies are considered. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  13. Chloride, bromide and iodide scintillators with europium

    Energy Technology Data Exchange (ETDEWEB)

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  14. C- versus O-Arylation of an Enol-Lactone Using Potassium tert-butoxide

    Directory of Open Access Journals (Sweden)

    El Moktar Essassi

    2003-05-01

    Full Text Available Abstract: The use of potassium tert-butoxide as the base in arylation reactions of an enollactone with a series of benzyl halides was explored. Our work demonstrates that the ratio of C-arylation to O-arylation varies with the substitution pattern of the aryl halide.

  15. Antioxidant Functions of the Aryl Hydrocarbon Receptor

    Directory of Open Access Journals (Sweden)

    Cornelia Dietrich

    2016-01-01

    Full Text Available The aryl hydrocarbon receptor (AhR is a transcription factor belonging to the basic helix-loop-helix/PER-ARNT-SIM family. It is activated by a variety of ligands, such as environmental contaminants like polycyclic aromatic hydrocarbons or dioxins, but also by naturally occurring compounds and endogenous ligands. Binding of the ligand leads to dimerization of the AhR with aryl hydrocarbon receptor nuclear translocator (ARNT and transcriptional activation of several xenobiotic phase I and phase II metabolizing enzymes. It is generally accepted that the toxic responses of polycyclic aromatic hydrocarbons, dioxins, and structurally related compounds are mediated by activation of the AhR. A multitude of studies indicate that the AhR operates beyond xenobiotic metabolism and exerts pleiotropic functions. Increasing evidence points to a protective role of the AhR against carcinogenesis and oxidative stress. Herein, I will highlight data demonstrating a causal role of the AhR in the antioxidant response and present novel findings on potential AhR-mediated antioxidative mechanisms.

  16. Iodide kinetics and experimental I-131 therapy in a xenotransplanted human sodium-iodide symporter-transfected human follicular thyroid carcinoma cell line

    NARCIS (Netherlands)

    Smit, J.W.A.; Elst, van der J.P.; Karperien, M.; Que, I.; Stokkel, M.; Heide, van der D.; Romijn, J.A.

    2002-01-01

    Uptake of iodide is a prerequisite for radioiodide therapy in thyroid cancer. However, loss of iodide uptake is frequently observed in metastasized thyroid cancer, which may be explained by diminished expression of the human sodium-iodide symporter (hNIS). We studied whether transfection of hNIS int

  17. Efficient and Convenient Preparation of Water-Soluble Fullerenol

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jian-Min章建民; YANG Wen杨文; HE Ping何萍; ZHU Shi-Zheng朱士正

    2004-01-01

    An efficient and convenient preparation of fullerenols was described. With polyethylene glycol (PEG) 400 as catalyst, fullerenols were conveniently synthesized via the direct reaction of fullerene with aqueous NaOH. By control of reaction conditions, either water-soluble C60 fullerenol or water-insoluble C60 fullerenol could be obtained selectively.

  18. Public Attitudes toward Stuttering in Turkey: Probability versus Convenience Sampling

    Science.gov (United States)

    Ozdemir, R. Sertan; St. Louis, Kenneth O.; Topbas, Seyhun

    2011-01-01

    Purpose: A Turkish translation of the "Public Opinion Survey of Human Attributes-Stuttering" ("POSHA-S") was used to compare probability versus convenience sampling to measure public attitudes toward stuttering. Method: A convenience sample of adults in Eskisehir, Turkey was compared with two replicates of a school-based, probability cluster…

  19. Evaluation of mercuric iodide ceramic semiconductor detectors

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M.; Zuck, A.; Braiman, M.; Nissenbaum, J. [Hebrew Univ., Jerusalem (Israel); Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L. [LEPSI (ULP/IN2P3), Strasbourg (France)

    1998-02-01

    Mercuric iodide ceramic radiation detectors, which can act as nuclear particle counters, have been fabricated with single continuos electrical contacts and with linear strip contacts. They have been tested with different kinds of {gamma} and {beta} sources as well as in a high energy beam at CERN. The detectors were also successfully tested for radiation hardness with irradiation of 5*10{sup 14} neutrons/cm{sup 2}. The ratio of detected photons over the number of absorbed photons has been measured with {gamma} sources of different energies, and it ranges from 20% at 44 keV up to about 30% at 660 keV. An absolute efficiency of 70% has been measured for a 350 {mu}m thick detector for {beta} particles emitted by a {sup 90}Sr source. Charge collection efficiency, defined as the amount of charge induced on the electrodes by a mminimum ionizing particle (MIP) traversing the detector, has been measured in two samples. The average collected charge fits well with a linear curve with slope of 35 electrons/(kV/cm) per 100 {mu}m. This result is well described by a dynamic device simulation, where the free carrier mean lifetime is used as a free parameter, adjusted to a value of 1.5 ns, i.e. about 1/100 of the corresponding lifetime in single crystal HgI{sub 2} detectors. The response to MIP has also been studied with a high energy (100 GeV) muon beam in CERN. A preliminary beam profile is presented while a more detailed analysis is still in progress and will be presented elsewhere. These results together with the low cost of the material make ceramic HgI{sub 2} detectors excellent candidates for large area particle tracking and imaging applications, even in a radiation harsh environment. (orig.). 14 refs.

  20. Practical Direct α-Arylation of Cyclopentanones by Palladium/Enamine Cooperative Catalysis.

    Science.gov (United States)

    Xu, Yan; Su, Tianshun; Huang, Zhongxing; Dong, Guangbin

    2016-02-12

    Direct arylation of cyclopentanones has been a long-standing challenge because of competitive self-aldol condensation and multiple arylations. Reported herein is a direct mono-α-C-H arylation of cyclopentanones with aryl bromides which is enabled by palladium/amine cooperative catalysis. This method is scalable and chemoselective with broad functional-group tolerance. Application to controlled sequential arylation of cyclopentanones has been also demonstrated. PMID:26840218

  1. Methyl Iodide Formation Under Postulated Nuclear Reactor Accident Conditions

    International Nuclear Information System (INIS)

    The formation of methyl iodide under conditions of postulated nuclear reactor accidents is discussed. Although thermodynamic calculations indicate the equilibrium methyl iodide concentrations would be quite low, calculations based on a simple kinetic scheme involving reaction between small hydrocarbon species and iodine indicate that concentrations higher than equilibrium can occur during the course of the reaction. Such calculations were performed over a wide range of initial species concentrations and a range of temperatures representative of some reactor accident situations. These calculations suggest that little methyl iodide would be expected within the core volume where temperatures are maximum. As the gas leaves the core volume and expands into the plenum region, it cools and the concentration of methyl iodide increases. At the intermediate temperatures which might characterize this region, the formation of methyl iodide from thermally induced reactions could reach its maximum rate. The gas continues to cool, however, and it is probable that by the time it leaves the plenum region it has cooled to the point where thermally induced reactions may be of little importance. Although the thermally induced reactions will become slower as the gas expands and cools, the radiation-induced reactions will not be slowed to the same extent. The gases leaving the core carry fission products and hence a radiation source is available to initiate reaction by a temperature-independent process. An investigation of the radiation chemical formation and decomposition of methyl iodide in the presence of steam suggests that radiation-induced methyl iodide formation will generally be rapid under the postulated accident situations. Thus, in the plenum region where thermal reactions have become slow, the radiation-induced reaction can still proceed and may well become the dominant factor. The same situation probably pertains as well to the containment region. (author)

  2. Synthesis of 3-fluoro-3-aryl oxindoles: Direct enantioselective α arylation of amides

    KAUST Repository

    Wu, Linglin

    2012-02-06

    Modus operandi: Catalytic access to the title compounds through a new asymmetric α-arylation protocol is reported (see scheme). These products are formed in good yields and excellent enantioselectivities by using a new and easily synthesized chiral N-heterocyclic carbene (NHC) ligand. Advanced DFT calculations reveal the properties of the NHC ligand and the mode of operation of the catalyst. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Direct no-carrier-added {sup 18}F-labelling of arenes via nucleophilic substitution on aryl(2-thienyl)iodonium salts

    Energy Technology Data Exchange (ETDEWEB)

    Ross, T.L.

    2006-01-15

    For in vivo imaging of molecular processes via positron emission tomography (PET) radiotracers of high specific activity are demanded. In case of the most commonly used positron emitter fluorine-18, this is only achievable with no-carrier-added [{sup 18}F]fluoride, which implies nucleophilic methods of {sup 18}F-substitution. Whereas electron deficient aromatic groups can be labelled in one step using no-carrier-added [{sup 18}F]fluoride, electron rich {sup 18}F-labelled aromatic molecules are only available by multi-step radiosyntheses or carrier-added electrophilic reactions. Here, diaryliodonium salts represent an alternative, since they have been proven as potent precursor for a direct nucleophilic {sup 18}F-introduction into aromatic molecules. Furthermore, as known from non-radioactive studies, the highly electron rich 2-thienyliodonium leaving group leads to a high regioselectivity in nucleophilic substitution reactions. Consequently, a direct nucleophilic no-carrier-added {sup 18}F-labelling of electron rich arenes via aryl(2-thienyl)iodonium precursors was developed in this work. The applicability of direct nucleophilic {sup 18}F-labelling was examined in a systematic study on eighteen aryl(2-thienyl)iodonium salts. As electron rich precursors the ortho-, meta- and para-methoxyphenyl(2-thienyl)iodonium bromides, iodides, tosylates and triflates were synthesised. In addition, para-substituted (R=BnO, CH{sub 3}, H, Cl, Br, I) aryl(2-thienyl)iodonium bromides were prepared as precursors with a systematically varying electron density. As first approach, the general reaction conditions of the nucleophilic {sup 18}F-substitution procedure were optimised. The best conditions for direct nucleophilic no-carrier-added {sup 18}F-labelling via aryl(2-thienyl)iodonium salts were found with dimethylformamide as solvent, a reaction temperature of 130{+-}3 C and 25 mmol/l as concentration of the precursor. (orig.)

  4. A Convenient and Safe O-Methylation of Flavonoids with Dimethyl Carbonate (DMC

    Directory of Open Access Journals (Sweden)

    Maria Cristina Ginnasi

    2011-02-01

    Full Text Available Dietary flavonoids exhibit beneficial health effects. Several epidemiological studies have focused on their biological activities, including antioxidant, antibacterial, antiviral, anti-inflammatory and cardiovascular properties. More recently, these compounds have shown to be promising cancer chemopreventive agents in cell culture studies. In particular, O-methylated flavonoids exhibited a superior anticancer activity than the corresponding hydroxylated derivatives being more resistant to the hepatic metabolism and showing a higher intestinal absorption. In this communication we describe a convenient and efficient procedure in order to prepare a large panel of mono- and dimethylated flavonoids by using dimethyl carbonate (DMC, an ecofriendly and non toxic chemical, which plays the role of both solvent and reagent. In order to promote the methylation reaction under mild and practical conditions, 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU was added in the solution; methylated flavonoids were isolated in high yields and with a high degree of purity. This methylation protocol avoids the use of hazardous and high toxic reagents (diazomethane, dimethyl sulfate, methyl iodide.

  5. The unexpected influence of aryl substituents in N-aryl-3-oxobutanamides on the behavior of their multicomponent reactions with 5-amino-3-methylisoxazole and salicylaldehyde

    Directory of Open Access Journals (Sweden)

    Volodymyr V. Tkachenko

    2014-12-01

    Full Text Available The switchable three-component reactions of 5-amino-3-methylisoxazole, salicylaldehyde and N-aryl-3-oxobutanamides under different conditions were studied and discussed. The unexpected influence of the aryl substituent in N-aryl-3-oxobutanamides on the behavior of the reaction was discovered. The key influence of ultrasonication and Lewis acid catalysts led to an established protocol to selectively obtain two or three types of heterocyclic scaffolds depending on the substituent in the N-aryl moiety.

  6. 2-aminopyrimidine-4,6-diol as an efficient ligand for solvent-free copper-catalyzed N-arylations of imidazoles with aryl and heteroaryl halides.

    Science.gov (United States)

    Xie, Ye-Xiang; Pi, Shao-Feng; Wang, Jian; Yin, Du-Lin; Li, Jin-Heng

    2006-10-13

    Efficient and solvent-free copper-catalyzed N-arylations of imidazoles with aryl and heteroaryl halides have been demonstrated. In the presence of CuBr, 2-aminopyrimidine-4,6-diol, and TBAF (n-Bu4NF), a variety of imidazoles underwent the N-arylation reaction with aryl and heteroaryl halides smoothly in moderate to excellent yields. Noteworthy is that the reaction is conducted under solvent-free conditions. PMID:17025338

  7. Bismuth tri-iodide radiation detector development

    Science.gov (United States)

    Gokhale, Sasmit S.

    Bismuth tri-iodide is an attractive material for room temperature radiation detection. BiI3 demonstrates a number of properties that are apt for semiconductor radiation detection, especially gamma ray spectroscopy. The high atomic number (ZBi = 83 and ZI = 53) and the relatively high density (5.78 g/cm3) cause the material to have good photon stopping power, while the large band-gap (1.67 eV ) allows it to function as a room temperature radiation detector without any cooling mechanism. This work presents the fabrication and characterization of BiI3 radiation detectors. For the purpose of this research detectors were fabricated by cutting BiI3 crystal boules, followed by mechanical and chemical surface treatments. Detectors with various electrode geometries enabling single polarity charge sensing were fabricated. The electrical characteristics and the radiation response of the detectors were measured. The radiation response measurement was performed at room temperature using a 241Am alpha particle source and a 241Am sealed gamma-ray source. The spectral resolutions of the detectors varied from 2.09% - 6.1% for 59.5 keV gamma-rays and between 26% - 40% for 5.48 MeV alpha particles. Charge carrier properties such as the electron and hole mobility and lifetime were also estimated. The electron mobility for an ultrapure BiI 3 detector was estimated to be approximately 433 cm 2/Vs while that for antimony doped BiI3 was estimated to be around 956 cm2/Vs and the mobility-lifetime product for electrons was estimated to be around 5.44 x 10-4 cm 2/V. Detector simulation was performed using the Monte Carlo simulation code MCNP5. A Matlab script which incorporates charge carrier trapping and statistical variation was written to generate a gamma-ray spectrum from the simulated energy deposition spectra. Measured and simulated spectra were compared to extract the charge carrier mobility-lifetime products, which for electrons and holes were estimated to be 5 x 10-3 cm2/V and 1.3 x

  8. Macrosegregation during Plane Front Solidification of Cesium Iodide wt Percent Thallium Iodide Alloy

    Science.gov (United States)

    Sidawi, Ibrahim M. S.

    Macrosegregation produced during directional solidification of CsI-1 wt% TlI by vertical Bridgman technique has been examined in crucibles of varying diameter, from 0.5 to 2.0 cm. Phase diagram and temperature dependence of the thermal conductivity have been determined. The experimentally observed liquid-solid interface shape and the fluid flow behavior have been compared with that computed from the commercially available code FIDAP. Thallium iodide content of the alloy was observed to increase along the length of the directionally solidified specimens, resulting in continuously decreasing light output. The experimentally observed solutal distribution agrees with predictions from the boundary layer model of Favier. The observed macrosegregation behavior suggests that there is a significant convection in the melt even in the smallest crucible diameter of 0.5 cm.

  9. Phase 1 Methyl Iodide Deep-Bed Adsorption Tests

    Energy Technology Data Exchange (ETDEWEB)

    Nick Soelberg; Tony Watson

    2014-08-01

    Nuclear fission results in the production of fission products (FPs) and activation products including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Research, demonstrations, and some reprocessing plant experience have indicated that diatomic iodine can be captured with efficiencies high enough to meet regulatory requirements. Research on the capture of organic iodides has also been performed, but to a lesser extent [Jubin 2012b]. Several questions remain open regarding the capture of iodine bound in organic compounds. Deep-bed methyl iodide adsorption testing has progressed according to a multi-laboratory methyl iodide adsorption test plan. This report summarizes the first phase of methyl iodide adsorption work performed according to this test plan using the deep-bed iodine adsorption test system at the Idaho National Laboratory (INL), performed during Fiscal Year (FY) 2013 and early FY-2014. Testing has been performed to address questions posed in the test plan, and followed the testing outline in the test plan. Tests established detection limits, developed procedures for sample analysis with minimal analytical interferences, and confirmed earlier results that show that the methyl iodide reacts when in contact with the AgZ sorbent, and not significantly in the gas flow upstream of the sorbent. The reaction(s) enable separation of the iodine from the organic moiety, so that the iodine can chemisorb onto the sorbent. The organic moiety can form other compounds, some of which are organic compounds that are detected and can be tentatively identified using GC-FID and GCMS. Test results also show that other gas constituents (NOx and/or H2O) can affect the methyl iodide reactions. With NOx and H2O present in the gas stream, the majority of uncaptured iodine exiting iodine-laden sorbent beds is in the form of I2 or HI, species that

  10. Standard free energy of formation of iron iodide

    Science.gov (United States)

    Khandkar, A.; Tare, V. B.; Wagner, J. B., Jr.

    1983-01-01

    An experiment is reported where silver iodide is used to determine the standard free energy of formation of iron iodide. By using silver iodide as a solid electrolyte, a galvanic cell, Ag/AgI/Fe-FeI2, is formulated. The standard free energy of formation of AgI is known, and hence it is possible to estimate the standard free energy of formation of FeI2 by measuring the open-circuit emf of the above cell as a function of temperature. The free standard energy of formation of FeI2 determined by this method is -38784 + 24.165T cal/mol. It is estimated that the maximum error associated with this method is plus or minus 2500 cal/mol.

  11. A novel peculiar mutation in the sodium/iodide symporter gene in spanish siblings with iodide transport defect.

    Science.gov (United States)

    Kosugi, Shinji; Okamoto, Hiroomi; Tamada, Aiko; Sanchez-Franco, F

    2002-08-01

    Previously, we reported two Spanish siblings with congenital hypothyroidism due to total failure of iodide transport. These were the only cases reported to date who received long-term iodide treatment over 10 yr. We examined the sodium/iodide symporter (NIS) gene of these patients. A large deletion was observed by long and accurate PCR using primers derived from introns 2 and 7 of the NIS gene. PCR-direct sequencing revealed a deletion of 6192 bases spanning from exon 3 to intron 7 and an inverted insertion of a 431-base fragment spanning from exon 5 to intron 5 of the NIS gene. The patients were homozygous for the mutation, and their mother was heterozygous. In the mutant, deletion of exons 3-7 was suggested by analysis using programs to predict exon/intron organization, resulting in an in-frame 182-amino acid deletion from Met(142) in the fourth transmembrane domain to Gln(323) in the fourth exoplasmic loop. The mutant showed no iodide uptake activity when transfected into COS-7 cells, confirming that the mutation was the direct cause of the iodide transport defect in these patients. Further, the mutant NIS protein was synthesized, but not properly expressed, on the cell surface, but was mostly accumulated in the cytoplasm, suggesting impaired targeting to the plasma membrane. PMID:12161518

  12. A new convenient access to highly functionalized ()-2-arylvinyl bromides

    Indian Academy of Sciences (India)

    Yubo Jiang; Chunxiang Kuang

    2009-11-01

    Highly functionalized ()-2-arylvinyl bromides were prepared in high yields through a new convenient access by acylation of ()-4-(2-bromovinyl)phenol with fatty and aromatic acids at room temperature using dicyclohexyl carbodiimide (DCC) and dimethylaminopyridine (DMAP).

  13. Enhanced Olefin Cross Metathesis Reactions: The Copper Iodide Effect

    Science.gov (United States)

    Voigtritter, Karl; Ghorai, Subir

    2011-01-01

    Copper iodide has been shown to be an effective co-catalyst for the olefin cross metathesis reaction. In particular, it has both a catalyst stabilizing effect due to iodide ion, as well as copper(I)-based phosphine-scavenging properties that apply to use of the Grubbs-2 catalyst. A variety of Michael acceptors and olefinic partners can be cross-coupled under mild conditions in refluxing diethyl ether that avoid chlorinated solvents. This effect has also been applied to chemistry in water at room temperature using the new surfactant TPGS-750-M. PMID:21528868

  14. Mercuric iodide dosimeter response to high energy electron beams

    Energy Technology Data Exchange (ETDEWEB)

    Loewinger, E.; Nissenbaum, J.; Schieber, M.M.

    1988-01-01

    Mercuric iodide solid state dosimeter response to high energy electron beams of up to 35 MeV is reported. High sensitivity of up to 1.5 V/cGy was observed with a 200 V external bias, as well as several mV/cGy, with no external bias for small volume (approx. 10 mm/sup 3/) detectors. The physical characteristics of the detector response are discussed, showing the feasibility of mercuric iodide as a reliable dosimeter for high energy electron beams.

  15. Health Indicators: Eliminating bias from convenience sampling estimators

    OpenAIRE

    HEDT, Bethany L.; Pagano, Marcello

    2011-01-01

    Public health practitioners are often called upon to make inference about a health indicator for a population at large when the sole available information are data gathered from a convenience sample, such as data gathered on visitors to a clinic. These data may be of the highest quality and quite extensive, but the biases inherent in a convenience sample preclude the legitimate use of powerful inferential tools that are usually associated with a random sample. In general, we know nothing abou...

  16. Cuprous Iodide Catalyzed Synthesis of Diaryl Selenide and Telluride from Organoboronic Acids with Diphenyl Diselenide and Ditelluride

    Institute of Scientific and Technical Information of China (English)

    WANG,Lei; WANG,Min; YAN,Jin-Can; LI,Pin-Hua

    2004-01-01

    @@ Organoselenium and tellurium compounds have received much attention not only as synthetic reagents or intermediates in organic synthesis but also as promising donor molecules for conductive materials.[1] A number of synthetic methods have been reported to prepare organoselenium and tellurium derivatives. A convenient and general method to introduce a selenium or tellurium moiety into organic molecules is the reaction of a metal selenolate or tellurolate with appropriate electrophiles such as organic halides, acyl chlorides, epoxides, and α, β-enones.[2] However, it is difficult to synthesize the unsymmetrical diarylselenides and tellurides through the reaction of selenide anion with organic halides because of the less reactivity of aryl halides. To accomplish this purpose, the reaction (iodobenzene with phenylselenol)was generally carried out in the presence of catalysts, ligands and strong bases. But, the reaction needs longer time to accomplish and form the products in moderate yields.

  17. Uptake of Iodide From Water in Atlantic Halibut Larvae (Hippoglossus Hippoglossus L.)

    DEFF Research Database (Denmark)

    Moren, Mari; Sloth, Jens Jørgen; Hamre, Kristin

    2008-01-01

    relative low levels of iodide (0-22 nM) and except for samples from one site; the levels of iodide and iodate were in agreement with previously published data. The uptake of iodide from seawater was measured by incubating Atlantic halibut larvae in water with a constant level of radioactive iodide (I-125...... is whether Atlantic halibut larvae are capable of absorbing iodide from the water and if so, can the seawater sustain the iodine requirement during larval development and metamorphosis. Levels of iodide and iodate in seawater samples from four different rearing facilities were analysed. All samples contained...... concentration of iodide in the water. The highest level of iodide used was 2000 nM,100 times higher than what was measured in the seawater samples. The uptake curves did not seem to reach equilibrium. This may be due to a constant nonspecific uptake or that the equilibrium level is higher than 2000 n...

  18. The electrosorption of tetraalkylammonium ions on silver iodide

    NARCIS (Netherlands)

    Keizer, de A.

    1981-01-01

    The object of the present investigations was to study the ef fect of the adsorption of charged organic ions on electrically charged, solid-liquid interfaces. To that end, symmetrical quater nary ammonium ions were adsorbed on a silver iodide-electrolyte interface at various surface charges. The elec

  19. Radiation-hard polycrystalline mercuric iodide semiconductor particle counters

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M. [Hebrew Univ., Jerusalem (Israel)]|[Sandia National Laboratories, Livermore Ca 94556 (United States); Zuck, A.; Melekhov, L.; Nissenbaum, J. [Hebrew Univ., Jerusalem (Israel); Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L. [LEPSI (ULP/IN2P3), Strasbourg (France)

    1998-06-01

    Mercuric iodide polycrystalline radiation detectors, which can act as nuclear particle counters and for large area imaging devices, have been fabricated using three different methods. Response to X- and gamma rays, beta particles and to 100GeV muons, as well as radiation hardness results are briefly described. (orig.) 8 refs.

  20. Iodide volatility under condition relevant to PWR steam generator faults

    International Nuclear Information System (INIS)

    The evaluation of iodine volatility during steam generator tube rupture (SGTR) is hampered by three factors: (i) lack of suitable plant data under fault conditions, (ii) lack of experimental data (mainly due to the difficulty of performing experiments under the conditions required) and (iii) uncertainty in theoretical methods to extrapolate experimental data to the required conditions. This report summarises methods of estimating the volatility of hydrogen iodide and iodide salts at the required conditions of temperature and pressure. A thermodynamic method has been used to estimate HI volatility and the density correlation method for iodide salt volatility. It is assumed throughout that it is more conservative to predict higher volatility. Consideration is given to two explanations of experiments carried out at Oak Ridge National Laboratory (ORNL) on the influence of boric acid concentration and pH on the volatility of radioiodine ostensibly under SGTR conditions: (i) the results have been interpreted in terms of reactions involving volatility of iodide salt/ion-pairs and complexation by boric acid in the gas phase and (ii) the possibility is explored that the observed results are due to the influence of oxidation leading to the formation of much more volatile iodine species. (author)

  1. FY-2015 Methyl Iodide Deep-Bed Adsorption Test Report

    Energy Technology Data Exchange (ETDEWEB)

    Soelberg, Nicholas Ray [Idaho National Lab. (INL), Idaho Falls, ID (United States); Watson, Tony Leroy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-30

    Nuclear fission produces fission and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Deep-bed methyl iodide adsorption testing has continued in Fiscal Year 2015 according to a multi-laboratory methyl iodide adsorption test plan. Updates to the deep-bed test system have also been performed to enable the inclusion of evaporated HNO3 and increased NO2 concentrations in future tests. This report summarizes the result of those activities. Test results showed that iodine adsorption from gaseous methyl iodide using reduced silver zeolite (AgZ) resulted in initial iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) under 1,000 for the conditions of the long-duration test performed this year (45 ppm CH3I, 1,000 ppm each NO and NO2, very low H2O levels [3 ppm] in balance air). The mass transfer zone depth exceeded the cumulative 5-inch depth of 4 bed segments, which is deeper than the 2-4 inch depth estimated for the mass transfer zone for adsorbing I2 using AgZ in prior deep-bed tests. The maximum iodine adsorption capacity for the AgZ under the conditions of this test was 6.2% (6.2 g adsorbed I per 100 g sorbent). The maximum Ag utilization was 51%. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

  2. FY-2015 Methyl Iodide Deep-Bed Adsorption Test Report

    International Nuclear Information System (INIS)

    Nuclear fission produces fission and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Deep-bed methyl iodide adsorption testing has continued in Fiscal Year 2015 according to a multi-laboratory methyl iodide adsorption test plan. Updates to the deep-bed test system have also been performed to enable the inclusion of evaporated HNO3 and increased NO2 concentrations in future tests. This report summarizes the result of those activities. Test results showed that iodine adsorption from gaseous methyl iodide using reduced silver zeolite (AgZ) resulted in initial iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) under 1,000 for the conditions of the long-duration test performed this year (45 ppm CH3I, 1,000 ppm each NO and NO2, very low H2O levels [3 ppm] in balance air). The mass transfer zone depth exceeded the cumulative 5-inch depth of 4 bed segments, which is deeper than the 2-4 inch depth estimated for the mass transfer zone for adsorbing I2 using AgZ in prior deep-bed tests. The maximum iodine adsorption capacity for the AgZ under the conditions of this test was 6.2% (6.2 g adsorbed I per 100 g sorbent). The maximum Ag utilization was 51%. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

  3. The network-based energy management system for convenience stores

    Energy Technology Data Exchange (ETDEWEB)

    Wang, An-Ping; Hsu, Pau-Lo [Department of Electrical and Control Engineering, National Chiao-Tung University, 1001 Ta-Hsiue Road, Hsinchu City 310 (China)

    2008-07-01

    Convenience stores generally consume energy higher than other retailing merchants. As the problem of energy shortage becomes more serious during summer, almost all convenience stores sign a contract with power plants, which provides for fines if demand limiting occurs in Taiwan and many other countries. Therefore, a reliable and effective method to reduce their utility consumption is required for modern business and industry. This research integrates the remote sensors, the control network, and the embedded system technologies to construct a distributed energy management control system for dedicated convenience stores. Energy consumption can thus be reasonably managed with demand limits by measuring and analyzing the power consumption sources in four major subsystems of convenience stores, namely, (1) air-conditioning, (2) lighting, (3) heating, and (4) refrigeration. By applying the proposed demand prediction and control method, the demand limiting condition can be properly predicted, and the possible peak load can thus be eliminated via the network control mechanism. Moreover, by integrating the LonWork fieldbus and the WinCE operating system (OS), the proposed system has been successfully applied to a convenience store. The experimental results indicate that the proposed distributed energy management system suitably predicts the peak loading condition and successfully prevents its occurrence by switching the air-conditioning system without affecting the indoor temperature regulation. (author)

  4. First come, First served: Enhancing the Convenience Store Service Experience

    Directory of Open Access Journals (Sweden)

    Yuan-Ling Chiao

    2012-09-01

    Full Text Available One distinctive characteristic of Taiwanese city streets is the omnipresence of convenience stores. These clean, brightly lit stores are in operation 24 hours a day, seven days a week, and offer a wide range of constantly updated lifestyle products and services. Past research in convenience stores have often overlooked the work experiences of convenience store employees, and their contribution to the overall service experience. Thus, the goal of this exploratory study is to explore the convenience store work environment, and to provide some suggestions for in-store technological enhancements. Data was collected through in-depth interviewing, field study observations and Living Lab methodologies. Our research reveals that convenience store employees experience several types of physical, mental and emotional strains throughout their shifts. These strains are often derived from excessive physical exertion and unpleasant interactions with customers. We suggest that certain in-store technological enhancements, such as seamless sensing and seamful actuating, can serve to alleviate employee sense of pressure and anxiety during customer interactions.

  5. Hypervalent iodine(iii)-promoted N-incorporation into N-aryl vinylogous carbamates to quinoxaline diesters: access to 1,4,5,8-tetraazaphenanthrene.

    Science.gov (United States)

    Sagar, A; Vidaycharan, Shinde; Shinde, Anand H; Sharada, Duddu S

    2016-04-26

    A novel oxidative N-incorporation strategy for synthesis of quinoxaline diesters under metal-free conditions is described for the first time. The mild reaction conditions allow for this transformation via the formation of two C(sp(2))-N bonds utilizing cheaply available NaN3 as the N-atom source. N-Aryl vinylogous carbamates in this study undergo azidation at enamino C(sp(2))-H selectively. The robustness of this strategy is further demonstrated by the synthesis of a valuable 1,4,5,8-tetraazaphenanthrene derivative using a mild and convenient approach.

  6. Microwave-Promoted Rapid Synthesis of 1-Aryl-1, 2, 3-Triazoles

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Aryl azides and a-keto phosphorus ylides were reacted within 4~10 minutes with silica gel support, under microwave irridiation to afford corresponding l-aryl-l, 2, 3-triazoles in moderate to good yields.

  7. Control of Reactivity and Regioselectivity for On-Surface Dehydrogenative Aryl-Aryl Bond Formation.

    Science.gov (United States)

    Kocić, Nemanja; Liu, Xunshan; Chen, Songjie; Decurtins, Silvio; Krejčí, Ondřej; Jelínek, Pavel; Repp, Jascha; Liu, Shi-Xia

    2016-05-01

    Regioselectivity is of fundamental importance in chemical synthesis. Although many concepts for site-selective reactions are well established for solution chemistry, it is not a priori clear whether they can easily be transferred to reactions taking place on a metal surface. A metal will fix the chemical potential of the electrons and perturb the electronic states of the reactants because of hybridization. Additionally, techniques to characterize chemical reactions in solution are generally not applicable to on-surface reactions. Only recent developments in resolving chemical structures by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) paved the way for identifying individual reaction products on surfaces. Here we exploit a combined STM/AFM technique to demonstrate the on-surface formation of complex molecular architectures built up from a heteroaromatic precursor, the tetracyclic pyrazino[2,3-f][4,7]phenanthroline (pap) molecule. Selective intermolecular aryl-aryl coupling via dehydrogenative C-H activation occurs on Au(111) upon thermal annealing under ultrahigh vacuum (UHV) conditions. A full atomistic description of the different reaction products based on an unambiguous discrimination between pyrazine and pyridine moieties is presented. Our work not only elucidates that ortho-hydrogen atoms of the pyrazine rings are preferentially activated over their pyridine equivalents, but also sheds new light onto the participation of substrate atoms in metal-organic coordination bonding during covalent C-C bond formation. PMID:27059121

  8. Hospital Systems, Convenient Care Strategies, and Healthcare Reform.

    Science.gov (United States)

    Kaissi, Amer; Shay, Patrick; Roscoe, Christina

    2016-01-01

    Retail clinics (RCs) and urgent care centers (UCCs) are convenient care models that emerged on the healthcare scene in the past 10 to 15 years. Characterized as disruptive innovations, these models of healthcare delivery seem to follow a slightly different path from each other. Hospital systems, the very organizations that were originally threatened by convenient care models, are developing them and partnering with existing models. We posit that legislative changes such as the Affordable Care Act created challenges for hospital systems that accelerated their adoption of these models. In this study, we analyze 117 hospital systems in six states and report on their convenient care strategies. Our data suggest that UCCs are more prevalent than RCs among hospital systems, and that large and unexplained state-by-state variations exist in the adoption of these strategies. We also postulate about the future role of hospital systems in leading these innovations. PMID:27111934

  9. Thermodynamic analysis of production of high purity titanium by thermal decomposition of titanium iodide

    Institute of Scientific and Technical Information of China (English)

    CHEN Xiao-hu; WANG Hua; LIU Yi-min; FANG Min

    2009-01-01

    High purity titanium was prepared by thermal decomposition of titanium iodide. The feasible synthetic route and optimum decompositon temperaure were obtained by thermodynamic analysis in the process of thermal decomposition of titanium iodide and nucleation growth theory. The temperature for the formation of titanium iodide is in the range of 800-900 K, at which a large amount of titanium iodide vapour can be obtained. The decomposition temperature of titanium iodide is in the range of 1 300-1 500 K, at which a favourable decomposition rate can be achieved. The experiment results show that the purity of the produced titanium is more than 99.995%.

  10. Rapid Synthesis of Aryl Fluorides in Continuous Flow through the Balz-Schiemann Reaction.

    Science.gov (United States)

    Park, Nathaniel H; Senter, Timothy J; Buchwald, Stephen L

    2016-09-19

    The Balz-Schiemann reaction remains a highly utilized means for preparing aryl fluorides from anilines. However, the limitations associated with handling aryl diazonium salts often hinder both the substrate scope and scalability of this reaction. To address this, a new continuous flow protocol was developed that eliminates the need to isolate the aryl diazonium salts. The new process has enabled the fluorination of an array of aryl and heteroaryl amines. PMID:27558308

  11. A novel mutation in the sodium/iodide symporter gene in the largest family with iodide transport defect.

    Science.gov (United States)

    Kosugi, S; Bhayana, S; Dean, H J

    1999-09-01

    We previously reported nine children with an autosomally recessive form of congenital hypothyroidism due to an iodide transport defect in a large Hutterite family with extensive consanguinity living in central Canada. Since the original report, we have diagnosed congenital hypothyroidism by newborn TSH screening in 9 additional children from the family. We performed direct sequencing of the PCR products of each NIS (sodium/iodide symporter) gene exon with flanking introns amplified from genomic DNA extracted from peripheral blood cells of the patients. We identified a novel NIS gene mutation, G395R (Gly395-->Arg; GGA-->AGA), in 10 patients examined in the present study. All of the parents tested were heterozygous for the mutation, suggesting that the patients were homozygous. The mutation was located in the 10th transmembrane helix. Expression experiments by transfection of the mutant NIS complimentary DNA into COS-7 cells showed no perchlorate-sensitive iodide uptake, confirming that the mutation is the direct cause of the iodide transport defect in these patients. A patient who showed an intermediate saliva/serum technetium ratio (14.0; normal, > or = 20) and was considered to have a partial or less severe defect in the previous report (IX-24) did not have a NIS gene mutation. It is now possible to use gene diagnostics of this unique NIS mutation to identify patients with congenital hypothyroidism due to an iodide transport defect in this family and to determine the carrier state of potential parents for genetic counseling and arranging rapid and early diagnosis of their infants. PMID:10487695

  12. Conveniently assembled multiple-electrode-pair CO2 laser

    Science.gov (United States)

    Ye, Lihua; Li, Xiangyen; He, Anzhi

    2000-04-01

    A conveniently assembled multiple-electrode-pair (MEP) transversely excited amplify (TEA) CO2 laser is introduced in this paper. The laser is described from the view of device configuration, power supply, control circuit, and etc. The laser output is variable from single pulse to double pulse and multiple pulse with different assembly. We adopt a new alignment method for cavity. The pulse time interval given by control system is continuously adjustable from 0 to 150 microseconds. Experiments prove that the pulse series property is stable and that the pulse parameters are perfect. The conveniently assembled laser lay a foundation for the industry application of multiple-electrode-pair CO2 laser.

  13. Defective organification of iodide causing congenital goitrous hypothyroidism.

    Science.gov (United States)

    Ishikawa, N; Eguchi, K; Ohmori, T; Momotani, N; Nagayama, Y; Hosoya, T; Oguchi, H; Mimura, T; Kimura, S; Nagataki, S; Ito, K

    1996-01-01

    A 26-yr-old Japanese woman with congenital goitrous hypo-thyroidism and sensorineural deafness underwent a thyroidectomy. Examination of the thyroid gland revealed characteristic features of multinodular goiter. The T3 and T4 content in thyroglobulin (Tg) were 0.03 and 0.02 mol/mol Tg, respectively. Iodide incorporation into Tg, using slices of the thyroid tissue, revealed that iodide organification of thyroid tissue from our patient was markedly lower than that of normal controls. Then, guaiacol and iodide oxidation activities of thyroid peroxidase (TPO) in our patient's thyroid tissue were lower than those of normal controls (guaiacol assay: 1.92 vs. 30.0 +/- 5.7 mGU/mg protein; iodide assay: 1.1 vs. 6.6 +/- 2.8 mIU/mg protein). Lineweaver-Burk plot analysis of the oxidation rates of guaiacol and iodide indicated that this patient's TPO had a defect in the binding of guaiacol and iodide, but the coupling activity of the patient's TPO was not decreased compared with those of two normal thyroids. In this case and in control subjects, Nothern gel analysis of TPO messenger RNA from unstimulated and TSH-stimulated thyroid cells revealed a 3.2 kilobase species in the former and four distinct messenger RNA species of 4.0, 3.2, 2.1, and 1.7 kilobases in the latter. Western blot analysis of TPOs obtained from this patient and from control subjects identified the same 107 kDa protein, using antimicrosomal antibody-positive serum. We analyzed the coding sequence in the patient's TPO gene by using polymerase chain reaction technique. A single point mutation of G-->C at 1265 base pair was detected only in the TPO gene, but this point mutation does not alter the amino acid residue. It is possible that posttranslational modification such as abnormal glycosylation may occur in the TPO molecules. Furthermore, it is possible that there are differences in the tertiary structures of the TPO molecules between our patient and normal subjects. The above abnormalities of TPO molecules

  14. Convenient meat and meat products. Societal and technological issues.

    Science.gov (United States)

    Leroy, Frédéric; Degreef, Filip

    2015-11-01

    In past and contemporary foodscapes, meat and meat products have not only been following convenience trends, they have been at the heart of them. Historically, the first substantial demands for meat convenience must have been for the outsourcing of hunting or domestication, as well as slaughtering activities. In its turn, this prompted concerns for shelf-life stabilisation and the development of preservation strategies, such as meat fermentation. Demands for ease of preparation and consumption can be traced back to Antiquity but have gained in importance over the centuries, especially with the emergence of novel socio-cultural expectations and (perceived) time scarcity. Amongst other trends, this has led to the creation of ready meals and meat snacks and the expansion of urban fast food cultures. Additionally, contemporary requirements focus on the reduction of mental investments, via the "convenient" concealment of slaughtering, the optimisation of nutritional qualities, and the instant incorporation of more intangible matters, such as variety, hedonistic qualities, reassurance, and identity. An overview is given of the technological issues related to the creation of meat convenience, in its broadest sense, along with their societal implications. PMID:25656303

  15. Convenient Synthesis of Bis(oxazoline) Dicarboxylate Derivatives

    Institute of Scientific and Technical Information of China (English)

    Bin FU; Da Ming DU; Qing XIA

    2004-01-01

    The synthesis of bis(oxazoline) dicarboxylate derivatives was investigated.Diethyl-aminosulfur trifluoride(DAST)was used as a convenient cyclization reagent in the synthesis of bis(oxazoline)dicarboxylate derivatives,which can not be obtained by the general method using MsCl and Et3N as dehydrating cyclization reagent.

  16. Smiles Rearrangement Based Practical One-pot Synthesis of N-Alkyl/aryl-6-aminoquinolines from 6-Hydroxylquinoline

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Yongsheng; Vijaykumar, B. V. D.; Jang, Kiwan; Choi, Kyungmin; Shin, Dongsoo [Changwon National Univ., Changwon (Korea, Republic of); Zuo, Hua [Southwest Univ., Chongqing (Korea, Republic of); Yoon, Yongjin [Gyeongsang National Univ., Chinju (Korea, Republic of)

    2013-12-15

    The C-N coupling protocol reported herein represents a convenient and practical synthesis of N-alkyl/aryl-6-aminoquinolines in a three-step one-pot manner by simple addition of 6-hydroxyquinoline and N-alkyl/aryl-2-chloroacetamides with Cs{sub 2}CO{sub 3} or K{sub 2}CO{sub 3} in DMF at 150 .deg. C via Smiles rearrangement. An electron donating substituent on the nitrogen counterpart would accelerate the rearrangement process to achieve various anilines in good yields. We currently engaged in making a chemical library including multifarious N-substituted-6-aminoquinolines, to be used in the screening for specific AChEI activity. Furthermore, this work extends the scope of preparing different heterocyclic synthons in drug design for various biological activities. Aminoquinolines and their derivatives are important chemical entities that are widely used as pro-drugs and drugs due to their antimicrobial, cytotoxic and anti-malarial activities etc.

  17. Inhibition of Bfl-1 with N-Aryl Maleimides

    OpenAIRE

    Cashman, John R.; MacDonald, Mary; Ghirmai, Senait; Okolotowicz, Karl J.; Sergienko, Eduard; Brown, Brock; Garcia, Xochella; Zhai, Dayong; John C Reed

    2010-01-01

    High throughput screening of 66,000 compounds using competitive binding of peptides comprising the BH3 domain to anti-apoptotic Bfl-1 led to the identification of fourteen validated “hits” as inhibitors of Bfl-1. N-Aryl maleimide 1 was among the validated “hits”. A chemical library encompassing over 280 analogs of 1 was prepared following a two-step synthesis. Structure-activity studies for inhibition of Bfl-1 by analogs of N-aryl maleimide 1 revealed a preference for electron-withdrawing sub...

  18. Aryl diazonium salts new coupling agents and surface science

    CERN Document Server

    Chehimi, Mohamed Mehdi

    2012-01-01

    Diazonium compounds are employed as a new class of coupling agents to link polymers, biomacromolecules, and other species (e. g. metallic nanoparticles) to the surface of materials. The resulting high performance materials show improved chemical and physical properties and find widespread applications. The advantage of aryl diazonium salts compared to other surface modifiers lies in their ease of preparation, rapid (electro)reduction, large choice of reactive functional groups, and strong aryl-surface covalent bonding.This unique book summarizes the current knowledge of the surface and

  19. Synthesis and Structure of Bis(4-nitrobenzaldehyde thiosemicarbazone) Cadmium Iodide

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The title complex, bis(4-nitrobenzaldehyde thiosemicarbazone) cadmium iodide (C16H16CdI2N8O4S2) crystallizes in the triclinic system, space group P1 with a=9.632(2), b=11.227(2), c=14.031(3), α= 67.50(3), β= 86.99(3), γ= 66.64(3)°, V=1278.13, Z = 2, Dc = 2.117gcm-3, F(000) = 772, μ =3.472mm-1 MoKα radiation (λ=0.71073), R = 0.0443, wR= 0.1425 for 4529 observed reflections [I>2σ(I)] of 4731 independent reflections. The result shows that the structure contains CdL2I2 (where L = 4-nitrobenzaldehyde thiosemicarbazone) distorted tetrahedral units in which the two ligands are S-bonded as monodentate to cadmium ion; the two iodide ions are also coordinated to Cd(II).

  20. (1,2-Dicarba-closo-dodecaboranyltrimethylmethanaminium iodide

    Directory of Open Access Journals (Sweden)

    Jong-Dae Lee

    2011-08-01

    Full Text Available The title compound, [1-(CH33NCH2-1,2-C2B10H11]+·I− or C6H22B10N+·I−, was obtained by the reaction of (1,2-dicarba-closo-dodecaboranyldimethylmethanamine with methyl iodide. The asymmetric unit contains two iodide anions and two (o-carboranyltetramethylammonium cations. The bond lengths and angles in the carborane cage are within normal ranges, but the N—Cmethylene—Ccage angle is very large [120.2 (2°] because of repulsion between the carborane and tetramethylammonium units. In the crystal, ions are linked through C—H...I hydrogen bonds.

  1. Methyl iodide production in the ocean: Implications for climate change

    Science.gov (United States)

    Smythe-Wright, Denise; Boswell, Stephen M.; Breithaupt, Petra; Davidson, Russell D.; Dimmer, Claudia H.; Eiras Diaz, Ledicia B.

    2006-09-01

    Methyl iodide concentrations of up to 45 pmol L-1, which flux into the marine boundary layer, have been found in low latitude waters of the Atlantic and Indian oceans. These high concentrations correlate well with the abundance of Prochlorococcus, and we have confirmed the release of methyl iodide by this species in laboratory culture experiments. Extrapolating, we estimate the global ocean flux of iodine to the marine boundary layer from this single source to be 5.3 × 1011 g I yr-1, which is a large fraction of the previously estimated total global flux and the implications are far reaching. Climate prediction models suggest increases in sea surface temperature and changes in biogeographical provenances in response to global warming. Such changes are likely to increase the abundance of Prochlorococcus, and we estimate a concomitant ˜15% increase in the release of iodine species to the atmosphere. Potentially, this could help mitigate global warming.

  2. New applications for the zinc iodide-osmium tetroxide technique.

    OpenAIRE

    Dağdeviren, A; ALP, H.; Ors, U

    1994-01-01

    The zinc iodide-osmium tetroxide (ZIO) fixation/staining method was applied for neurocytological studies and also to examine several other tissue samples including epidermal Langerhans cells, blood and bone marrow cells and lymphoid tissue. Although precise specificity cannot be attributed to the staining reaction, interesting staining patterns for different cell types were observed by using one of the ZIO staining solutions. The significance of ZIO positivity is briefly discussed.

  3. Heterogeneous ice nucleation on silver-iodide-like surfaces

    OpenAIRE

    Fraux, Guillaume; Doye, Jonathan P. K.

    2014-01-01

    We attempt to simulate the heterogeneous nucleation of ice at model silver-iodide surfaces and find relatively facile ice nucleation and growth at the Ag+ termi nated basal face, but never see nucleation at the I- terminated basal face or the prism and normal faces. Water molecules strongly adsorb onto the Ag+ terminate d face to give a well-ordered hexagonal ice-like bilayer that then acts as a template for further ice growth.

  4. Lead iodide perovskite light-emitting field-effect transistor

    OpenAIRE

    Chin, Xin Yu; Cortecchia, Daniele; Yin, Jun; Bruno, Annalisa; Soci, Cesare

    2015-01-01

    Despite the widespread use of solution-processable hybrid organic–inorganic perovskites in photovoltaic and light-emitting applications, determination of their intrinsic charge transport parameters has been elusive due to the variability of film preparation and history-dependent device performance. Here we show that screening effects associated to ionic transport can be effectively eliminated by lowering the operating temperature of methylammonium lead iodide perovskite (CH3NH3PbI3) field-eff...

  5. Radiative efficiency of lead iodide based perovskite solar cells

    OpenAIRE

    Kristofer Tvingstedt; Olga Malinkiewicz; Andreas Baumann; Carsten Deibel; Snaith, Henry J.; Vladimir Dyakonov; Bolink, Henk J.

    2015-01-01

    The maximum efficiency of any solar cell can be evaluated in terms of its corresponding ability to emit light. We herein determine the important figure of merit of radiative efficiency for Methylammonium Lead Iodide perovskite solar cells and, to put in context, relate it to an organic photovoltaic (OPV) model device. We evaluate the reciprocity relation between electroluminescence and photovoltaic quantum efficiency and conclude that the emission from the perovskite devices is dominated by a...

  6. Ionic transport in hybrid lead iodide perovskite solar cells

    OpenAIRE

    Eames, Christopher; Frost, Jarvist Moore; Piers R. F. Barnes; O'Regan, Brian C.; Walsh, Aron; Islam, M. Saiful

    2015-01-01

    Solar cells based on organic–inorganic halide perovskites have recently shown rapidly rising power conversion efficiencies, but exhibit unusual behaviour such as current–voltage hysteresis and a low-frequency giant dielectric response. Ionic transport has been suggested to be an important factor contributing to these effects; however, the chemical origin of this transport and the mobile species are unclear. Here, the activation energies for ionic migration in methylammonium lead iodide (CH3NH...

  7. Derivatives of aryl-4-guanidinomethylbenzoate and N-aryl-4-guanidinomethylbenzamide as new antibacterial agents: synthesis and bioactivity

    Institute of Scientific and Technical Information of China (English)

    Wen-yuan YU; Li-xia YANG; Jian-shu XIE; Ling ZHOU; Xue-yuan JIANG; De-xu ZHU; Mutsumi MURAMATSU; Ming-wei WANG

    2008-01-01

    Aim: The aim of the present study was to design, synthesize, and evaluate novel antibacterial agents, derivatives of aryl-4-guanidinomethylbenzoate and N-aryl-4-guanidinomethylbenzamide. Methods: A total of 44 derivatives of aryl-4-guanidin-omethylbenzoate (series A) and N-aryl-4-guanidinomethylbenzamide (series B) were synthesized and their antibacterial activities were assessed in vitro against a variety of Gram-positive and Gram-negative bacteria by an agar dilution method. Results: Twelve compounds showed potent bactericidal effects against a panel of Gram-positive germs, including methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), vancomycin-intermediate Sta-phylococcus aureus (VISA), and methicillin-resistant coagulase-negative staphy-lococci (MRCNS), with minimum inhibitory concentrations (MIC) ranging be-tween 0.5 and 8 μg/mL, which were comparable to the MIC values of several marketed antibiotics. They exhibited weak or no activity on the Gram-negative bacteria tested. In addition, these compounds displayed high inhibitory activities towards oligopeptidase B of bacterial origin. Conclusion: In comparison with the previ-ously reported MIC values of several known antibiotics, the derivatives of aryl-4-guanidinomethylbenzoate and N-aryl-4-guanidinomethylbenzamide showed com-parable in vitro bactericidal activities against VRE and VISA as linezolid. Their growth inhibitory effects on MRSA were similar to vancomycin, but were less potent than linezolid and vancomycin against MRCNS. This class of compounds may have the potential to be developed into narrow spectrum antibacterial agents against certain drug-resistant strains of bacteria.

  8. Pseudoephedrine-Directed Asymmetric α-Arylation of α-Amino Acid Derivatives.

    Science.gov (United States)

    Atkinson, Rachel C; Fernández-Nieto, Fernando; Mas Roselló, Josep; Clayden, Jonathan

    2015-07-27

    Available α-amino acids undergo arylation at their α position in an enantioselective manner on treatment with base of N'-aryl urea derivatives ligated to pseudoephedrine as a chiral auxiliary. In situ silylation and enolization induces diastereoselective migration of the N'-aryl group to the α position of the amino acid, followed by ring closure to a hydantoin with concomitant explulsion of the recyclable auxiliary. The hydrolysis of the hydantoin products provides derivatives of quaternary amino acids. The arylation avoids the use of heavy-metal additives, and is successful with a range of amino acids and with aryl rings of varying electronic character.

  9. Pd-NHC-Catalyzed Alkynylation of General Aryl Sulfides with Alkynyl Grignard Reagents.

    Science.gov (United States)

    Baralle, Alexandre; Yorimitsu, Hideki; Osuka, Atsuhiro

    2016-07-25

    Cross-coupling reactions of unactivated aryl sulfides with alkynylmagnesium chloride have been invented to afford 1-aryl-1-alkynes with the aid of a palladium/N-heterocyclic carbene complex. This reaction has by far the widest scope of all transformations utilizing aryl sulfides and alkynes, while known cross-coupling alkynylations of aryl-sulfur electrophiles require activated azaaryl sulfides, thiolactams, or arenesulfonyl chlorides. The alkynylation of aryl sulfides is compatible with typical protecting functional groups. The alkynylation is applied to the synthesis of benzofuran-based fluorescent molecules by taking advantage of characteristic organosulfur chemistry.

  10. The sodium iodide symporter: its implications for imaging and therapy

    International Nuclear Information System (INIS)

    The sodium iodide symporter (NIS) is an intrinsic plasma membrane glycoprotein that mediates the active transport of iodide in the thyroid gland and a number of extrathyroidal tissues, in particular lactating mammary gland. In addition to its key function in thyroid physiology, NIS-mediated iodide accumulation allows diagnostic thyroid scintigraphy as well as therapeutic radioiodine application in benign and malignant thyroid disease. NIS therefore represents one of the oldest targets for molecular imaging and therapy. Based on the effective administration of radioiodine that has been used for over 60 years in the management of follicular cell-derived thyroid cancer, cloning and characterization of the NIS gene has paved the way for the development of a novel cytoreductive gene therapy strategy based on targeted NIS expression in thyroidal and nonthyroidal cancer cells followed by therapeutic application of 131I or alternative radionuclides, including 188Re and 211At. In addition, the possibility of direct and non-invasive imaging of functional NIS expression by 123I- and 99mTc-scintigraphy or 124I-PET-imaging allows the application of NIS as a novel reporter gene. In conclusion, the dual role of NIS as diagnostic and therapeutic gene and the detection of extra-thyroidal endogenous NIS expression in breast cancer open promising perspectives in nuclear medicine and molecular oncology for diagnostic and therapeutic application of NIS outside the thyroid gland. (orig.)

  11. Synthesis and evaluation of iodide uptake inhibitors in thyroid gland

    International Nuclear Information System (INIS)

    This work was intended to discover small organic molecules acting as iodide uptake inhibitors in thyroid cells. These compounds can indeed be derivatized into biochemical probes for further characterization of proteins involved in iodide transport mechanisms. On the long term, these inhibitors also appear as attractive drug candidates for treatment of thyroid pathologies or radioprotection against iodine isotopes. A similar strategy was adopted for both of the two inhibitor families. First, we synthesized a chemical library of around 100 analogues; we measured their IC50 against iodide uptake in FRTL-5 cells to get structure-activity relationships. Absolute configuration of stereo-genic centers was also investigated, and a preferential stereochemistry was found to be responsible for activity. From this basis, around twenty 'second-generation' analogues were synthesized by combining fragments contributing to biological activity. Biological evaluation indicated that nine were very potent inhibitors, with IC50 ≤ 6 nM and satisfying physicochemical properties required for drug candidates. Finally, one photoactivatable biotinylated probe was developed in each family and used for photoaffinity labeling. Several specifically labeled proteins are still under identification and constitute new potential therapeutic targets. (author)

  12. Gold nanoelectrode ensembles for direct trace electroanalysis of iodide.

    Science.gov (United States)

    Pereira, Francisco C; Moretto, Ligia M; De Leo, Manuela; Zanoni, Maria V Boldrin; Ugo, Paolo

    2006-08-01

    A procedure for the standardization of ensembles of gold nanodisk electrodes (NEE) of 30 nm diameter is presented, which is based on the analytical comparison between experimental cyclic voltammograms (CV) obtained at the NEEs in diluted solutions of redox probes and CV patterns obtained by digital simulation. Possible origins of defects sometimes found in NEEs are discussed. Selected NEEs are then employed for the study of the electrochemical oxidation of iodide in acidic solutions. CV patterns display typical quasi-reversible behavior which involves associated chemical reactions between adsorbed and solution species. The main CV characteristics at the NEE compare with those observed at millimeter sized gold disk electrodes (Au-macro), apart a slight shift in E1/2 values and slightly higher peak to peak separation at the NEE. The detection limit (DL) at NEEs is 0.3 microM, which is more than one order of magnitude lower than DL at the Au-macro (4 microM). The mechanism of the electrochemical oxidation of iodide at NEEs is discussed. Finally, NEEs are applied to the direct determination of iodide at micromolar concentration levels in real samples, namely in some ophthalmic drugs and iodized table salt.

  13. Enhanced iodide sequestration by 3-biphenyl-5,6-dihydroimidazo 2,1-b thiazole in sodium/iodide sym-porter (NIS)-expressing cells

    International Nuclear Information System (INIS)

    The ability of the sodium/iodide sym-porter (NIS) to take up iodide has long provided the basis for cyto-reductive gene therapy and cancer treatment with radio-iodide. One of the major limitations of this approach is that radio-iodide retention in NIS-expressing cells is not sufficient for their destruction. We identified and characterized a small organic molecule capable of increasing iodide retention in HEK293 cells permanently transfected with human NIS cDNA (hNIS-HEK293) and in the rat thyroid-derived cell line FRTL-5. In the presence of 3-biphenyl-4'-yl-5,6-dihydroimidazo[2,1-b)thiazole (ISA1), the transmembrane iodide concentration gradient was increased up to 4.5-fold. Our experiments indicate that the imidazo-thiazole derivative acts either by inhibiting anion efflux mechanisms, or by promoting the relocation of iodide into subcellular compartments. This new compound is not only an attractive chemical tool to investigate the mechanisms of iodide flux at the cellular level, but also opens promising perspectives in the treatment of cancer after NIS gene transfer. (authors)

  14. Enhanced iodide sequestration by 3-biphenyl-5,6-dihydroimidazo 2,1-b thiazole in sodium/iodide sym-porter (NIS)-expressing cells

    Energy Technology Data Exchange (ETDEWEB)

    Lecat-Guillet, N.; Ambroise, Y. [CEA, DSV, Dept Bioorgan Chem andt IsotopLabelling, Inst Biol and Technol, iBiTecS, F-91191 Gif Sur Yvette (France)

    2008-07-01

    The ability of the sodium/iodide sym-porter (NIS) to take up iodide has long provided the basis for cyto-reductive gene therapy and cancer treatment with radio-iodide. One of the major limitations of this approach is that radio-iodide retention in NIS-expressing cells is not sufficient for their destruction. We identified and characterized a small organic molecule capable of increasing iodide retention in HEK293 cells permanently transfected with human NIS cDNA (hNIS-HEK293) and in the rat thyroid-derived cell line FRTL-5. In the presence of 3-biphenyl-4'-yl-5,6-dihydroimidazo[2,1-b)thiazole (ISA1), the transmembrane iodide concentration gradient was increased up to 4.5-fold. Our experiments indicate that the imidazo-thiazole derivative acts either by inhibiting anion efflux mechanisms, or by promoting the relocation of iodide into subcellular compartments. This new compound is not only an attractive chemical tool to investigate the mechanisms of iodide flux at the cellular level, but also opens promising perspectives in the treatment of cancer after NIS gene transfer. (authors)

  15. Electrochemistry of silver iodide the capacity of the double layer at the silver iodide-water interface

    NARCIS (Netherlands)

    Lyklema, J.; Overbeek, J.Th.G.

    1961-01-01

    A method is described for obtaining differential double layer capacities on silver iodide. Especially the influence of the nature and concentration of indifferent electrolytes was investigated, viz., the nitrates of Li·, K·, Rb·, NH4·, H·, Tl·, Mg··, Ba··, Co··, Cd··, Pb··, La···, Th····, the fluori

  16. Iron-Mediated Direct Arylation of Unactivated Arenes in Air

    NARCIS (Netherlands)

    Huang, Yuxing; Moret, Marc-Etienne; Klein Gebbink, Bert

    2014-01-01

    Biaryls are a common motif in both natural and synthetic chemicals. Several methods have recently been reported for the preparation of these compounds using direct arylation catalyzed by iron, other base metals, or transition-metal-free systems. To date, these methods have all required inert and/or

  17. Copper-Mediated Oxidative Fluorination of Aryl Stannanes with Fluoride.

    Science.gov (United States)

    Gamache, Raymond F; Waldmann, Christopher; Murphy, Jennifer M

    2016-09-16

    A regiospecific method for the oxidative fluorination of aryl stannanes using tetrabutylammonium triphenyldifluorosilicate (TBAT) and copper(II) triflate is described. This reaction is robust, uses readily available reagents, and proceeds via a stepwise protocol under mild conditions (60 °C, 3.2 h). Broad functional group tolerance, including arenes containing protic and nucleophilic groups, is demonstrated. PMID:27571319

  18. Rh-Catalyzed arylation of fluorinated ketones with arylboronic acids.

    Science.gov (United States)

    Dobson, Luca S; Pattison, Graham

    2016-09-25

    The Rh-catalyzed arylation of fluorinated ketones with boronic acids is reported. This efficient process allows access to fluorinated alcohols in high yields under mild conditions. Competition experiments suggest that difluoromethyl ketones are more reactive than trifluoromethyl ketones in this process, despite their decreased electronic activation, an effect we postulate to be steric in origin.

  19. Oxidative electrochemical aryl C-C coupling of spiropyrans

    NARCIS (Netherlands)

    Ivashenko, Oleksii; van Herpt, Jochem T.; Rudolf, Petra; Feringa, Ben L.; Browne, Wesley R.

    2013-01-01

    The isolation and definitive assignment of the species formed upon electrochemical oxidation of nitro-spiropyran (SP) is reported. The oxidative aryl C-C coupling at the indoline moiety of the SP radical cation to form covalent dimers of the ring-closed SP form is demonstrated. The coupling is block

  20. Kinetic Resolution of Aryl Alkenylcarbinols Catalyzed by Fc-PIP

    Institute of Scientific and Technical Information of China (English)

    胡斌; 孟萌; 姜山山; 邓卫平

    2012-01-01

    An effective kinetic resolution of a variety of aryl alkenylcarbinols catalyzed by nonenzymatic acyl transfer catalyst Fe-PIP was developed, affording corresponding unreacted alcohols in good to excellent ee value up to 99% and with selectivity factors up to 24.

  1. Improvement of equipment for manufacture of vegetable convenience foods

    OpenAIRE

    Кіптела, Людмила Василівна; Загорулько, Олексій Євгенович; Загорулько, Андрій Миколайович

    2015-01-01

    In view of the difficult ecological situation in Ukraine and other European countries, there is an increasing demand for vegetable convenience foods, including fruit and vegetable raw materials that contain significant amounts of biologically active substances. To improve vegetable raw material processing, technical modernization of enterprises with effective and reliable equipment that has high performance, efficiency and reliability that will allow to substantially eliminate damage and loss...

  2. CONVENIENCE, ACCESSIBILITY, AND THE DEMAND FOR FAST FOOD

    OpenAIRE

    Jekanowski, Mark D.; Binkley, James K.; Eales, James S.

    2001-01-01

    This study explores the growth in demand for fast food. A distinguishing characteristic of fast food is its convenience; in today's pervasive marketplace, consumers need not travel far to find a fast food outlet. This greater availability translates into a decrease in the full price of obtaining a meal, which contributes to greater consumption. Market-level data are used to estimate demand equations in two time periods, incorporating changes in availability as well as prices, income, and vari...

  3. Direct and Convenient Mass Spectrometry Sampling with Ambient Flame Ionization

    OpenAIRE

    Xiao-Pan Liu; Hao-Yang Wang; Jun-Ting Zhang; Meng-Xi Wu; Wan-Shu Qi; Hui Zhu; Yin-Long Guo

    2015-01-01

    Recent innovations in ambient ionization technology for the direct analysis of various samples in their native environment facilitate the development and applications of mass spectrometry in natural science. Presented here is a novel, convenient and flame-based ambient ionization method for mass spectrometric analysis of organic compounds, termed as the ambient flame ionization (AFI) ion source. The key features of AFI ion source were no requirement of (high) voltages, laser beams and spray g...

  4. Development of convenient nitrogen laser by using control of discharge

    Science.gov (United States)

    Nakazawa, Seiichi; Yamaguchi, Eiichiro; Ishii, Yoshio

    2012-01-01

    Among the most important UV lasers are the excimer and the nitrogen. A nitrogen gas laser is widely used in various fields. We considered some ideas for a nitrogen laser built in more easily by using of triboluminescence. In this study, we discussed development and discussion of convenient nitrogen laser. We considered utilization of triboluminescence for control of discharge and the system of electric generator using triboluminescence in the longitudinally excited nitrogen laser.

  5. Health indicators: eliminating bias from convenience sampling estimators.

    Science.gov (United States)

    Hedt, Bethany L; Pagano, Marcello

    2011-02-28

    Public health practitioners are often called upon to make inference about a health indicator for a population at large when the sole available information are data gathered from a convenience sample, such as data gathered on visitors to a clinic. These data may be of the highest quality and quite extensive, but the biases inherent in a convenience sample preclude the legitimate use of powerful inferential tools that are usually associated with a random sample. In general, we know nothing about those who do not visit the clinic beyond the fact that they do not visit the clinic. An alternative is to take a random sample of the population. However, we show that this solution would be wasteful if it excluded the use of available information. Hence, we present a simple annealing methodology that combines a relatively small, and presumably far less expensive, random sample with the convenience sample. This allows us to not only take advantage of powerful inferential tools, but also provides more accurate information than that available from just using data from the random sample alone. PMID:21290401

  6. Flags of convenience: oil company fleet operating method

    Energy Technology Data Exchange (ETDEWEB)

    1980-02-01

    About 81% of international ocean-going tanker tonnage is concentrated under the flags of Liberia (about one-third of world tonnage), Japan, UK, Norway, Greece, France, US, Italy, Panama, and Spain, despite the fact that there are now more than 70 countries with tankers in their registries. Approximately 30% of world merchant ships fly flags of convenience, and approximately 35% of world tanker tonnage operates in those registries, or approximately 130 million dwt out of a total of 370 million dwt. Oil tankers are the major users of flags of convenience, with approximately 60% of total oil tonnage in these registries, including 114 million dwt out of Liberia's total 154 million dwt. Liberian tanker tonnage is three times larger than that of Japan, its nearest competitor, and approximately 35% of its fleet in 1979 were in the 0-5 y age group compared with 32% for the world fleet. According to the United Nations Conference on Trade and Development, ownership of the world tonnage flying flags of convenience is approximately 32% by the US, which is also the largest user, approximately 21% by Greece, approximately 17% by Hong Kong, approximately 9% by Japan, and 16% by 12 other countries.

  7. Use of “Homeopathic” Ligand-Free Palladium as Catalyst for Aryl-Aryl Coupling Reactions

    NARCIS (Netherlands)

    Alimardanov, Asaf; Schmieder-van de Vondervoort, Lizette; Vries, André H.M. de; Vries, Johannes G. de

    2004-01-01

    We have previously shown that the use of ligand-free palladium employing Pd(OAc)2 as catalyst precursor in the Heck reaction of aryl bromides is possible if low catalyst loadings, typically between 0.01 – 0.1 mol % are used. We have now tested this phenomenon, which we have dubbed “homeopathic” pall

  8. Abiotic formation of methyl iodide on synthetic birnessite: A mechanistic study

    Energy Technology Data Exchange (ETDEWEB)

    Allard, Sébastien, E-mail: s.allard@curtin.edu.au; Gallard, Hervé

    2013-10-01

    Methyl iodide is a well-known volatile halogenated organic compound that contributes to the iodine content in the troposphere, potentially resulting in damage to the ozone layer. Most methyl iodide sources derive from biological activity in oceans and soils with very few abiotic mechanisms proposed in the literature. In this study we report that synthetic manganese oxide (birnessite δ-MnO{sub 2}) can catalyze the formation of methyl iodide in the presence of natural organic matter (NOM) and iodide. Methyl iodide formation was only observed at acidic pH (4–5) where iodide is oxidized to iodine and NOM is adsorbed on δ-MnO{sub 2}. The effect of δ-MnO{sub 2}, iodide and NOM concentrations, nature of NOM and ionic strength was investigated. High concentrations of methyl iodide were formed in experiments conducted with the model compound pyruvate. The Lewis acid property of δ-MnO{sub 2} leads to a polarization of the iodine molecule, and catalyzes the reaction with natural organic matter. As manganese oxides are strong oxidants and are ubiquitous in the environment, this mechanism could significantly contribute to the global atmospheric input of iodine. Highlights: • Methyl iodide is formed when iodide, natural organic matter and MnO{sub 2} are in contact. • Iodide is oxidized to iodine by MnO{sub 2} which reacts with NOM already adsorbed on MnO{sub 2}. • High formation of methyl iodide was observed with pyruvate. • This abiotic mechanism could contribute to the input of iodine in the atmosphere. • This abiotic mechanism could impact the ozone layer in the troposphere.

  9. Abiotic formation of methyl iodide on synthetic birnessite: A mechanistic study

    International Nuclear Information System (INIS)

    Methyl iodide is a well-known volatile halogenated organic compound that contributes to the iodine content in the troposphere, potentially resulting in damage to the ozone layer. Most methyl iodide sources derive from biological activity in oceans and soils with very few abiotic mechanisms proposed in the literature. In this study we report that synthetic manganese oxide (birnessite δ-MnO2) can catalyze the formation of methyl iodide in the presence of natural organic matter (NOM) and iodide. Methyl iodide formation was only observed at acidic pH (4–5) where iodide is oxidized to iodine and NOM is adsorbed on δ-MnO2. The effect of δ-MnO2, iodide and NOM concentrations, nature of NOM and ionic strength was investigated. High concentrations of methyl iodide were formed in experiments conducted with the model compound pyruvate. The Lewis acid property of δ-MnO2 leads to a polarization of the iodine molecule, and catalyzes the reaction with natural organic matter. As manganese oxides are strong oxidants and are ubiquitous in the environment, this mechanism could significantly contribute to the global atmospheric input of iodine. Highlights: • Methyl iodide is formed when iodide, natural organic matter and MnO2 are in contact. • Iodide is oxidized to iodine by MnO2 which reacts with NOM already adsorbed on MnO2. • High formation of methyl iodide was observed with pyruvate. • This abiotic mechanism could contribute to the input of iodine in the atmosphere. • This abiotic mechanism could impact the ozone layer in the troposphere

  10. Expression of sodium-iodide symporter in thyroid gland tumors: immunohistochemical study

    Directory of Open Access Journals (Sweden)

    Bondarenko O.O.

    2009-01-01

    Full Text Available One of the key moments of radioiodine therapy, and also radioisotope diagnostics of cancers of a thyroid gland is ability of their cells to accumulate iodide. This ability is provided with activity of the specific transporter – sodium-iodide symporter. Our research has shown disorders of sodium-iodide symporter immunoexpression in all tumors of thyroid gland: from overexpression and absence of plasma membrane expression in differentiated carcinomas, up to weak or actually absent in low differentiated cancers and Hurtle-cells tumors. Thus, there is a prospect of application of the sodium-iodide symporter, as the prognostic marker of thyroid cancers.

  11. Temperature dependent energy levels of methylammonium lead iodide perovskite

    Energy Technology Data Exchange (ETDEWEB)

    Foley, Benjamin J.; Marlowe, Daniel L.; Choi, Joshua J., E-mail: jjc6z@virginia.edu, E-mail: mgupta@virginia.edu, E-mail: scudiero@wsu.edu [Department of Chemical Engineering, University of Virginia, Charlottesville, Virginia 22904 (United States); Sun, Keye; Gupta, Mool C., E-mail: jjc6z@virginia.edu, E-mail: mgupta@virginia.edu, E-mail: scudiero@wsu.edu [Department of Electrical and Computer Engineering, University of Virginia, Charlottesville, Virginia 22904 (United States); Saidi, Wissam A. [Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, Pennsylvania 15261 (United States); Scudiero, Louis, E-mail: jjc6z@virginia.edu, E-mail: mgupta@virginia.edu, E-mail: scudiero@wsu.edu [Chemistry Department and Materials Science and Engineering Program, Washington State University, Pullman, Washington 99164 (United States)

    2015-06-15

    Temperature dependent energy levels of methylammonium lead iodide are investigated using a combination of ultraviolet photoemission spectroscopy and optical spectroscopy. Our results show that the valence band maximum and conduction band minimum shift down in energy by 110 meV and 77 meV as temperature increases from 28 °C to 85 °C. Density functional theory calculations using slab structures show that the decreased orbital splitting due to thermal expansion is a major contribution to the experimentally observed shift in energy levels. Our results have implications for solar cell performance under operating conditions with continued sunlight exposure and increased temperature.

  12. Mechanochromic and thermochromic luminescence of a copper iodide cluster.

    Science.gov (United States)

    Perruchas, Sandrine; Le Goff, Xavier F; Maron, Sébastien; Maurin, Isabelle; Guillen, François; Garcia, Alain; Gacoin, Thierry; Boilot, Jean-Pierre

    2010-08-18

    The mechanochromic and thermochromic luminescence properties of a molecular copper(I) iodide cluster formulated [Cu(4)I(4)(PPh(2)(CH(2)CH=CH(2)))(4)] are reported. Upon mechanical grinding in a mortar, its solid-state emission properties are drastically modified as well as its thermochromic behavior. This reversible phenomenon has been attributed to distortions in the crystal packing leading to modifications of the intermolecular interactions and thus of the [Cu(4)I(4)] cluster core geometry. Notably, modification of the Cu-Cu interactions seems to be involved in this phenomenon directly affecting the emissive properties of the cluster. PMID:20698644

  13. Persistent photovoltage in methylammonium lead iodide perovskite solar cells

    OpenAIRE

    Baumann, A.; Tvingstedt, K.; Heiber, M. C.; Väth, S.; C. Momblona; H. J. Bolink; Dyakonov, V.

    2014-01-01

    We herein perform open circuit voltage decay (OCVD) measurements on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to increase the understanding of the charge carrier recombination dynamics in this emerging technology. Optically pulsed OCVD measurements are conducted on CH3NH3PbI3 solar cells and compared to results from another type of thin-film photovoltaics, namely, the two reference polymer–fullerene bulk heterojunction solar cell devices based on P3HT:PC60BM and PTB7:PC70...

  14. Temperature dependent energy levels of methylammonium lead iodide perovskite

    International Nuclear Information System (INIS)

    Temperature dependent energy levels of methylammonium lead iodide are investigated using a combination of ultraviolet photoemission spectroscopy and optical spectroscopy. Our results show that the valence band maximum and conduction band minimum shift down in energy by 110 meV and 77 meV as temperature increases from 28 °C to 85 °C. Density functional theory calculations using slab structures show that the decreased orbital splitting due to thermal expansion is a major contribution to the experimentally observed shift in energy levels. Our results have implications for solar cell performance under operating conditions with continued sunlight exposure and increased temperature

  15. Measuring Cell Death by Propidium Iodide Uptake and Flow Cytometry.

    Science.gov (United States)

    Crowley, Lisa C; Scott, Adrian P; Marfell, Brooke J; Boughaba, Jeanne A; Chojnowski, Grace; Waterhouse, Nigel J

    2016-01-01

    Propidium iodide (PI) is a small fluorescent molecule that binds to DNA but cannot passively traverse into cells that possess an intact plasma membrane. PI uptake versus exclusion can be used to discriminate dead cells, in which plasma membranes become permeable regardless of the mechanism of death, from live cells with intact membranes. PI is excited by wavelengths between 400 and 600 nm and emits light between 600 and 700 nm, and is therefore compatible with lasers and photodetectors commonly available in flow cytometers. This protocol for PI staining can be used to quantitate cell death in most modern research facilities and universities. PMID:27371595

  16. Polarized spectral complexes of optical functions of monovalent mercury iodide

    Science.gov (United States)

    Sobolev, V. V.; Sobolev, V. Val.; Anisimov, D. V.

    2015-12-01

    Spectral complexes of optical functions of monovalent mercury iodide Hg2I2 were determined for E ⊥ c and E || c polarizations in the range from 2 to 5.5 eV at 4.2 K. The permittivity and characteristic electron energy loss spectra were expanded in simple components with the determination of their main parameters, including the energy of the maximum and the oscillator strength. The calculations were performed based on known reflectance spectra. Computer programs based on Kramers-Kronig relations and the improved parameter-free method of Argand diagrams were used.

  17. Electronic properties and Compton profiles of silver iodide

    Indian Academy of Sciences (India)

    Alpa Dashora; Ambica Marwal; K R Soni; B L Ahuja

    2010-06-01

    We have carried out an extensive study of electronic properties of silver iodide in - and -phases. The theoretical Compton profiles, energy bands, density of states and anisotropies in momentum densities are computed using density functional theories. We have also employed full-potential linearized augmented plane-wave method to derive the energy bands and the density of states. To compare our theoretical data, isotropic Compton profile measurement on -AgI using 137Cs Compton spectrometer at an intermediate resolution of 0.38 a.u. has been undertaken. The theoretical anisotropies are also interpreted on the basis of energy bands.

  18. Palladium-catalyzed direct arylation and cyclization of o-iodobiaryls to a library of tetraphenylenes

    Science.gov (United States)

    Zhu, Chendan; Zhao, Yue; Wang, Di; Sun, Wei-Yin; Shi, Zhuangzhi

    2016-09-01

    Aryl–aryl bond formation constitutes one of the most important subjects in organic synthesis. The recent developments in direct arylation reactions forming aryl–aryl bond have emerged as very attractive alternatives to traditional cross-coupling reactions. Here, we describe a general palladium-catalyzed direct arylation and cyclization of o-iodobiaryls to build a library of tetraphenylenes. This transformation represents one of the very few examples of C-H activation process that involves simultaneous formation of two aryl–aryl bonds. Oxygen plays a vital role by ensuring high reactivity, with air as the promoter furnished the best results. We anticipate this ligand-free and aerobic catalytic system will simplify the synthesis of tetraphenylenes as many of the reported methods involve use of preformed organometallic reagents and will lead to the discovery of highly efficient new direct arylation process.

  19. Household food waste separation behavior and the importance of convenience.

    Science.gov (United States)

    Bernstad, Anna

    2014-07-01

    Two different strategies aiming at increasing household source-separation of food waste were assessed through a case-study in a Swedish residential area (a) use of written information, distributed as leaflets amongst households and (b) installation of equipment for source-segregation of waste with the aim of increasing convenience food waste sorting in kitchens. Weightings of separately collected food waste before and after distribution of written information suggest that this resulted in neither a significant increased amount of separately collected food waste, nor an increased source-separation ratio. After installation of sorting equipment in households, both the amount of separately collected food waste as well as the source-separation ratio increased vastly. Long-term monitoring shows that results where longstanding. Results emphasize the importance of convenience and existence of infrastructure necessary for source-segregation of waste as important factors for household waste recycling, but also highlight the need of addressing these aspects where waste is generated, i.e. already inside the household. PMID:24780762

  20. Direct and Convenient Mass Spectrometry Sampling with Ambient Flame Ionization

    Science.gov (United States)

    Liu, Xiao-Pan; Wang, Hao-Yang; Zhang, Jun-Ting; Wu, Meng-Xi; Qi, Wan-Shu; Zhu, Hui; Guo, Yin-Long

    2015-11-01

    Recent innovations in ambient ionization technology for the direct analysis of various samples in their native environment facilitate the development and applications of mass spectrometry in natural science. Presented here is a novel, convenient and flame-based ambient ionization method for mass spectrometric analysis of organic compounds, termed as the ambient flame ionization (AFI) ion source. The key features of AFI ion source were no requirement of (high) voltages, laser beams and spray gases, but just using small size of n-butane flame (height approximately 1 cm, about 500 oC) to accomplish the rapid desorption and ionization for direct analysis of gaseous-, liquid- and solid-phase organic compounds, as well as real-world samples. This method has high sensitivity with a limit of detection of 1 picogram for propyphenazone, which allows consuming trace amount of samples. Compared to previous ionization methods, this ion source device is extremely simple, maintain-free, low-cost, user-friendly so that even an ordinary lighter (with n-butane as fuel) can achieve efficient ionization. A new orientation to mass spectrometry ion source exploitation might emerge from such a convenient, easy and inexpensive AFI ion source.

  1. Progress in tumor therapy with human sodium iodide symporter

    International Nuclear Information System (INIS)

    The sodium iodide symporter (NIS) is an intrinsic plasma membrane protein that mediates active iodide transport into the thyroid gland and several extrathyroidal tissues, in particular the lactation mammary gland. Because of the cloning characterization of NIS, its key role in thyroid pathology and physiology could be investigated. The progress would be significant if the mechanisms of NIS expression in lactating mammary gland and breast cancer are elucidated, in which more than 80% of cases express endogenous NIS. In the future, two approaches could extend the use of radioiodide treatment to thyroid cancer and nonthyroidal cancer. One is by using the main mechanisms involving tumorous transformation to treat the tumor, based on the reinducing NIS expression in thyroid and cancer. The other is based on the application of NIS as a novel cytoreductive gene therapy strategy. NIS offers the unique advantage that it can be used both as a reporter and as a therapeutic gene, so that it is possible to image, monitor, and treat the tumor with radioiodide, just as in differentiated thyroid cancer. (authors)

  2. Polymorphic copper iodide clusters: insights into the mechanochromic luminescence properties.

    Science.gov (United States)

    Benito, Quentin; Le Goff, Xavier F; Maron, Sébastien; Fargues, Alexandre; Garcia, Alain; Martineau, Charlotte; Taulelle, Francis; Kahlal, Samia; Gacoin, Thierry; Boilot, Jean-Pierre; Perruchas, Sandrine

    2014-08-13

    An in-depth study of mechanochromic and thermochromic luminescent copper iodide clusters exhibiting structural polymorphism is reported and gives new insights into the origin of the mechanochromic luminescence properties. The two different crystalline polymorphs exhibit distinct luminescence properties with one being green emissive and the other one being yellow emissive. Upon mechanical grinding, only one of the polymorphs exhibits great modification of its emission from green to yellow. Interestingly, the photophysical properties of the resulting partially amorphous crushed compound are closed to those of the other yellow polymorph. Comparative structural and optical analyses of the different phases including a solution of clusters permit us to establish a correlation between the Cu-Cu bond distances and the luminescence properties. In addition, the local structure of the [Cu4I4P4] cluster cores has been probed by (31)P and (65)Cu solid-state NMR analysis, which readily indicates that the grinding process modifies the phosphorus and copper atoms environments. The mechanochromic phenomenon is thus explained by the disruption of the crystal packing within intermolecular interactions inducing shortening of the Cu-Cu bond distances in the [Cu4I4] cluster core and eventually modification of the emissive state. These results definitely establish the role of cuprophilic interactions in the mechanochromism of copper iodide clusters. More generally, this study constitutes a step further into the understanding of the mechanism involved in the mechanochromic luminescent properties of metal-based compounds. PMID:25076411

  3. Nuclear detonation, thyroid cancer and potassium iodide prophylaxis

    Directory of Open Access Journals (Sweden)

    Viroj Wiwanitkit

    2011-01-01

    Full Text Available The recent nuclear disaster at Japan has raised global concerns about effects of radioactive leakage in the environment, associated hazards, and how they can be prevented. In this article, we have tried to explain about the guidelines laid down by World Health Organization for a potassium iodide prophylaxis following a nuclear disaster, and its mechanism of action in preventing thyroid cancer. Data was collected mainly from the studies carried out during the Chernobyl disaster of Russia in 1986 and the hazardous effects especially on the thyroid gland were studied. It was seen that radioactive iodine leakage from the nuclear plants mainly affected the thyroid gland, and especially children were at a higher risk at developing the cancers. Potassium Iodide prophylaxis can be administered in order to prevent an increase in the incidence of thyroid cancers in the population of an area affected by a nuclear disaster. However, one has to be cautious while giving it, as using it without indication has its own risks.

  4. Nonradiometric and radiometric testing of radioiodine sorbents using methyl iodide

    International Nuclear Information System (INIS)

    A nonradiometric test of adsorbents and adsorbers with normal methyl iodide (CH3127I) is desirable. Use of methyl radioiodide (CH3131I) requires special precautions and facilities and results in bed contamination. However, first it must be established to what extent the removal of CH3127I by adsorbents is indicative of the removal of CH3131I. An experimental apparatus was built and used to simultaneously measure the penetrations of CH3I molecules and the radioisotope in CH3131I through charcoal absorbent beds. Gas chromatography with electron capture detection was used to measure CH3I. Radioiodine was measured using charcoal traps within NaI scintillation well crystals. Real time (5-min interval) radioiodine measurement provided immediate penetration results directly comparable to the real time penetrations of methyl iodide. These penetrations were compared for typical charcoal adsorbents with these impregnants: (a) 5% KI3, (b) 5% KI3 + 2% TEDA, (c) 5% TEDA, and (d) metal salts (Whetlerite). Differences between CH3I and CH3131I penetrations observed for the two iodized charcoals were attributed to isotope exchange reactions. Equivalent penetrations were observed for non-iodized adsorbents and for iodized ones at initial time. First order rates were confirmed for reactions with TEDA and for isotope exchange. This was one more confirmation of the lack of a challenge concentration effect on efficiencies at low test bed loadings. In addition to other removal mechanisms, reversible physical adsorption was observed with all charcoals

  5. Numerical modelling of methyl iodide in the eastern tropical Atlantic

    Directory of Open Access Journals (Sweden)

    I. Stemmler

    2013-06-01

    Full Text Available Methyl iodide (CH3I is a volatile organic halogen compound that contributes significantly to the transport of iodine from the ocean to the atmosphere, where it plays an important role in tropospheric chemistry. CH3I is naturally produced and occurs in the global ocean. The processes involved in the formation of CH3I, however, are not fully understood. In fact, there is an ongoing debate whether production by phytoplankton or photochemical degradation of organic matter is the main source term. Here, both the biological and photochemical production mechanisms are considered in a biogeochemical module that is coupled to a one-dimensional water column model for the eastern tropical Atlantic. The model is able to reproduce observed subsurface maxima of CH3I concentrations. But, the dominating source process cannot be clearly identified as subsurface maxima can occur due to both direct biological and photochemical production. However, good agreement between the observed and simulated difference between surface and subsurface methyl iodide concentrations is achieved only when direct biological production is taken into account. Production rates for the biological CH3I source that were derived from published laboratory studies are shown to be inappropriate for explaining CH3I concentrations in the eastern tropical Atlantic.

  6. Subcellular localization of rice leaf aryl acylamidase activity.

    Science.gov (United States)

    Gaynor, J J; Still, C C

    1983-05-01

    The intracellular localization of aryl acylamidase (aryl-acylamide amidohydrolase, EC 3.5.1.13) in rice (Oryza sativa L. var Starbonnet) leaves was investigated. The enzyme hydrolyzes and detoxifies the herbicide propanil (3,4-dichloropropionanilide) thereby accounting for immunity of the rice plant to herbicidal action. Fractionation of mesophyll protoplasts by differential centrifugation yielded the highest specific activity of amidase in the crude mitochondrial fraction. Further separation of density gradients of the silica sol Percoll also indicated that this enzyme was mitochondrial. By the use of biochemical markers, the purified mitochondrial fraction was shown to be substantially free of contamination from nuclei, chloroplasts, golgi, and plasma membranes. Subfractionation of the purified mitochondria suggests that this enzyme is located on the outer membrane. PMID:16662987

  7. Impregnated palladium on magnetite as catalyst for direct arylation of heterocycles

    OpenAIRE

    Cano Monserrat, Rafael; Pérez Galera, Juana María; Ramón Dangla, Diego José; McGlacken, Gerard P.

    2016-01-01

    Palladium impregnated on magnetite is an efficient, cheap and easy to prepare catalyst for the direct arylation of heterocycles. Good yields are afforded under relatively mild conditions and a broad substrate scope is evident. The catalyst is regioselective in many cases, affording arylated products, at the C2- or C3-position (depending of the heterocycle used). The methodology can be extended to prepare chromenes through an intramolecular direct arylation reaction. Some evidence is provided ...

  8. Binding of polychlorinated biphenyls to the aryl hydrocarbon receptor.

    OpenAIRE

    Kafafi, S A; Afeefy, H Y; A. H. Ali; Said, H K; Kafafi, A G

    1993-01-01

    A new thermodynamic model for calculating the dissociation constants of complexes formed between the aryl hydrocarbon receptor (AhR) and polychlorinated biphenyls (PCBs) is reported. The free energies of binding of PCBs to AhR are controlled by their lipophilicities, electron affinities, and entropies. The corresponding physicochemical properties of polychlorinated dibenzo-p-dioxins and dibenzofurans also control their interactions with AhR. We present evidence supporting the hypothesis that ...

  9. The electrochemistry of arylated anthraquinones in room temperature ionic liquids

    OpenAIRE

    Gomis Berenguer, Alicia; Gómez Mingot, María; García Cruz, Leticia; Thiemann, Thies; Banks, Craig E.; Montiel Leguey, Vicente; Iniesta Valcárcel, Jesús

    2013-01-01

    Arylated anthraquinone derivatives of different sizes and different π-basicities have been prepared, and the electrochemical behaviour of these substances has been studied on screen printed graphite electrodes in the three room temperature ionic liquids (RTILs), 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6MIM][PF6]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([C8MIM][PF6]). Half redox potentials for the first and...

  10. Bibenzimidazole containing mixed ligand cobalt(III) complex as a selective receptor for iodide

    Digital Repository Service at National Institute of Oceanography (India)

    Indumathy, R.; Parameswarana, P.S.; Aiswarya, C.V.; Nair, B.U.

    -, OH- and OAc- do not bring about any dramatic visual colorimetric changes. However, metallo-receptor 2 brings about vivid color change with iodide anion visually and this could be due to charge transfer transition via ion pair formation with iodide ion...

  11. Unprecedentedly mild direct Pd-catalyzed arylation of oxazolo[4,5-b]pyridine

    DEFF Research Database (Denmark)

    Zhuravlev, Fedor

    2006-01-01

    Pd-catalyzed C-2 arylation of oxazolo[4,5-b]pyridine proceeds efficiently at 30 degrees C and tolerates a variety of aryl halides, including derivatized amino acids for which no racemization was observed during the reaction. Experimental evidence for facile deprotonation of oxazolo[4,5-b]pyridine......Pd-catalyzed C-2 arylation of oxazolo[4,5-b]pyridine proceeds efficiently at 30 degrees C and tolerates a variety of aryl halides, including derivatized amino acids for which no racemization was observed during the reaction. Experimental evidence for facile deprotonation of oxazolo[4,5-b...

  12. Microwave Assisted Solvent Free Synthesis of Azomethines from Aryl Aldehydes on Melamin Formaldehyde as Solid Support

    OpenAIRE

    Ramin Rezaei; Mohammadi, Mohammad K; Tahereh Ranjbar

    2011-01-01

    Various aryl aldehydes underwent prompt one pot conversion into the corresponding azomethines in high yields by reacting with hydroxylamine hydrochloride supported on melamine formaldehyde under microwave irradiation.

  13. Synthesis and characterization of 5-heteroarylsulfanyl-4-aryl-1,2,3-selena/thiadiazoles

    Indian Academy of Sciences (India)

    Ramaiyan Manikannan; Masilamani Shanmugaraja; Seetharaman Manojveer; Shanmugam Muthusubramanian

    2012-03-01

    Synthesis and spectral characterization of 2-methyl-5-[(4-aryl-1,2,3-selenadiazol-5-yl)sulfanyl]-1,3,4-thiadiazoles, 5-[4-aryl-1,2,3-selenadiazol-5-yl]sulfanyl-1-phenyl-1-1,2,3,4-tetraazoles, 4-aryl-5-[(5-methyl-1,3,4-thiadiazol-2-yl)sulfanyl]-1,2,3-thiadiazole and 5-[4-aryl-1,2,3-thiadiazol-5-yl]sulfanyl-1-phenyl-1-1,2,3,4-tetraazole have been reported.

  14. Synthesis of Novel Aryl(heteroarylsulfonyl Ureas of Possible Biological Interest

    Directory of Open Access Journals (Sweden)

    Maria Gdaniec

    2010-02-01

    Full Text Available The course of reaction of aryl and heteroaryl sulfonamides with diphenylcarbonate (DPC and 4-dimethylaminopyridine (DMAP was found to depend on the pKa of the sulfonamide used. Aryl sulfonamides with pKa ~ 10 gave 4-dimethylamino-pyridinium arylsulfonyl-carbamoylides, while the more acidic heteroaryl sulfonamides (pKa ~ 8 furnished 4-dimethylaminopyridinium heteroarylsulfonyl carbamates. Both the carbamoylides and carbamate salts reacted with aliphatic and aromatic amines with the formation of appropriate aryl(heteroarylsulfonyl ureas, and therefore, can be regarded as safe and stable substitutes of the hazardous and difficult to handle aryl(heteroarylsulfonyl isocyanates.

  15. Synthesis, growth, structural, thermal, optical properties of new metal-organic crystals: Methyltriphenylphosphonium iodide thiourea and methyltriphenylphosphonium iodide chloroform hemisolvate

    Science.gov (United States)

    Shivachev, Boris L.; Kossev, Krassimir; Dimowa, Louiza T.; Yankov, Georgi; Petrov, Todor; Nikolova, Rositsa P.; Petrova, Nadia

    2013-08-01

    Crystals of methyltriphenylphosphonium iodide thiourea (1) and methyltriphenylphosphonium iodide chloroform hemisolvate (2) were obtained for the first time. Fourier transform infrared (FTIR) spectral studies have been performed to identify the functional groups. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study their thermal properties. The optical transmittance window and the lower cutoff wavelength have been identified by UV-vis studies. Crystals of the title compounds suitable for single crystal X-ray analyses were successfully grown by slow evaporation and diffraction data were collected to elucidate the molecular structure and interactions. The proton donors (phosphonium) and proton acceptor (iodine) in the structure of 1 provide infrastructure to introduce charge asymmetry while in 2 chloroform molecule is not involved in the charge transfer. An optical quality crystal of 1 (5×4×2 mm3) was obtained by macroseeding. The crystal has developed facets with major ones (001) and (00¯1). A crystal of 1 was tested with 1060 nm laser radiation and showed second harmonic generation (SHG).

  16. Fabrication of Efficient Low-Bandgap Perovskite Solar Cells by Combining Formamidinium Tin Iodide with Methylammonium Lead Iodide

    Energy Technology Data Exchange (ETDEWEB)

    Liao, Weiqiang; Zhao, Dewei; Yu, Yue; Shrestha, Niraj; Ghimire, Kiran; Grice, Corey R.; Wang, Changlei; Xiao, Yuqing; Cimaroli, Alexander J.; Ellingson, Randy J.; Podraza, Nikolas J.; Zhu, Kai; Xiong, Ren-Gen; Yan, Yanfa

    2016-09-28

    Mixed tin (Sn)-lead (Pb) perovskites with high Sn content exhibit low bandgaps suitable for fabricating the bottom cell of perovskite-based tandem solar cells. In this work, we report on the fabrication of efficient mixed Sn-Pb perovskite solar cells using precursors combining formamidinium tin iodide (FASnI3) and methylammonium lead iodide (MAPbI3). The best-performing cell fabricated using a (FASnI3)0.6(MAPbI3)0.4 absorber with an absorption edge of ~1.2 eV achieved a power conversion efficiency (PCE) of 15.08 (15.00)% with an open-circuit voltage of 0.795 (0.799) V, a short-circuit current density of 26.86(26.82) mA/cm2, and a fill factor of 70.6(70.0)% when measured under forward (reverse) voltage scan. The average PCE of 50 cells we have fabricated is 14.39 +/- 0.33%, indicating good reproducibility.

  17. Colorimetric sensing of iodide based on triazole-acetamide functionalized gold nanoparticles

    International Nuclear Information System (INIS)

    We have modified gold nanoparticles (AuNPs) with triazole acetamide to obtain a material for the sensitive and selective colorimetric determination of iodide. The functionalized AuNPs were prepared by a reductive single chemical step using a Cu(I)-catalyzed click reaction. The presence of iodide ions induces the aggregation of these AuNPs and results in a color change from wine-red to purple. The iodide-induced aggregation can be detected visually with bare eyes, but also by photometry. The detection limit is as low as 15 nM. The method displays excellent selectivity for iodide over other anions due to the selective interaction with the amido groups of the triazole. The method was applied to the determination of iodide in spiked lake waters. (author)

  18. Peroxynitrite scavenging by different antioxidants. Part I: convenient assay.

    Science.gov (United States)

    Balavoine, G G; Geletii, Y V

    1999-01-01

    A convenient "tube" assay to quantify relative antioxidant activities in aqueous solutions has been developed. Peroxynitrite was employed as a biologically relevant source of radicals with Pyrogallol Red as a detecting molecule. A variety of compounds have been examined, namely polyphenols, uric acid, glutathione, and ascorbic acid. Competition kinetics were observed for the majority of examined compounds, except thymol and ascorbic acid. Pyrogallol Red was fully protected by ascorbic acid against the bleaching by peroxynitrite until its total consumption. The deviation from competition kinetics in the case of thymol was due to the formation of radicals from thymol and their subsequent reaction with Pyrogallol Red. Quercetin was the most efficient scavenger of free radicals. The measurements of relative antioxidant activities using Pyrogallol Red and other detecting molecules, such as gallocyanine and carminic acid, were in fair agreement. The assay was successfully used for a screening of antioxidant activity of plant extracts of unknown composition. PMID:10355895

  19. Optimizing Computational Efficiency and User Convenience in Plasma Simulation Codes

    Science.gov (United States)

    Barnes, Christopher W.

    1985-10-01

    It is usually important to write plasma simulation codes in such a way that they execute efficiently and are convenient to use. I discuss here practical techniques to achieve this goal. Numerical algorithms must be well formulated and advantage taken of machine architecture in casting the algorithm into a high level language such as Fortran. The advantages of writing critical routines in Assembler are discussed. For large simulation codes, disks must often be used as a temporary store for working data. Efficient methods for doing this are presented. Codes must not only be well organized for ease of implementation and maintenance, but also for ease of use. Ways are suggested for packaging codes such that setup, batch production, restarting and diagnostic postprocessing is facilitated. Particular emphasis is placed on graphics postprocessors, since they must be used in real time with graphics terminals as well as with hardcopy devices.

  20. Horizontal Ampoule Growth and Characterization of Mercuric Iodide at Controlled Gas Pressures for X-Ray and Gamma Ray Spectrometers

    Energy Technology Data Exchange (ETDEWEB)

    McGregor, Douglas S. [Kansas State Univ., Manhattan, KS (United States). Semiconductor Materials and Radiological Technologies Lab., Dept. of Nuclear and Mechanical Engineering; Ariesanti, Elsa [Kansas State Univ., Manhattan, KS (United States). Semiconductor Materials and Radiological Technologies Lab., Dept. of Nuclear and Mechanical Engineering; Corcoran, Bridget [Kansas State Univ., Manhattan, KS (United States). Semiconductor Materials and Radiological Technologies Lab., Dept. of Nuclear and Mechanical Engineering

    2004-04-30

    The project developed a new method for producing high quality mercuric iodide crystals of x-ray and gamma spectrometers. Included are characterization of mercuric iodide crystal properties as a function of growth environment and fabrication and demonstration of room-temperature-operated high-resolution mercuric iodide spectrometers.

  1. Copper-catalyzed arylation of alkyl halides with arylaluminum reagents

    Directory of Open Access Journals (Sweden)

    Bijay Shrestha

    2015-12-01

    Full Text Available We report a Cu-catalyzed coupling between triarylaluminum reagents and alkyl halides to form arylalkanes. The reaction proceeds in the presence of N,N,N’,N’-tetramethyl-o-phenylenediamine (NN-1 as a ligand in combination with CuI as a catalyst. This catalyst system enables the coupling of primary alkyl iodides and bromides with electron-neutral and electron-rich triarylaluminum reagents and affords the cross-coupled products in good to excellent yields.

  2. Lewis acidic (choline chloride.3ZnCl2) ionic liquid: A green and recyclable catalyst for the one-pot synthesis of 4-((3-indolyl)(aryl)methyl)-N,N-dimethylanilines under solvent-free conditions

    Indian Academy of Sciences (India)

    Rahim Hekmatshoar; Farnoush Mousavizadeh; Reyhaneh Rahnamafar

    2013-09-01

    A green and convenient procedure for the one-pot multicomponent synthesis of 4-((3-indolyl)(aryl)methyl)-N,N-dimethylanilines using (choline chloride.3ZnCl2) ionic liquid as catalyst, at 100°C and under solvent-free condition is described. Utilizing environmentally benign reagents, elimination of organic solvents, enhanced rates, reusability and moisture stability of the catalyst are the remarkable features observed in the reported reaction system. The catalyst was recycled up to four times with no noticeable drop in activity.

  3. Strawberry growers wavered over methyl iodide, feared public backlash

    Directory of Open Access Journals (Sweden)

    Julie Guthman

    2016-08-01

    Full Text Available Methyl iodide, once promoted as a suitable alternative to methyl bromide for soil fumigation in strawberry systems, was withdrawn from the market in 2012 after a contentious regulatory battle that revolved around its high toxicity. At the time of its withdrawal, Arysta LifeScience, the maker of the chemical, claimed that it was no longer economically viable. In this study, I investigated what made the chemical nonviable, with a specific focus on growers' nonadoption of it. Interviews with strawberry growers in the four top California strawberry-growing counties revealed that growers' decisions not to use it were primarily related to public disapproval, although the continued availability of methyl bromide and other fumigants played a contributing role by making adoption less urgent. The study results suggest that policies in place during the methyl bromide phaseout did not strongly encourage the development and extension of less toxic alternatives, which undermined the strawberry industry's position.

  4. Betaine potassium iodide dihydrate: a new compound of betaine

    International Nuclear Information System (INIS)

    Betaine potassium iodide dihydrate, [(CH3)3N+CH2COO-]2.KI.2H2O, BKI for short, is a new compound of the aminoacid betaine with a triclinic symmetry and the space group P1-bar at room temperature. The study of dielectric properties provided evidence for the existence of a structural phase transition occurring around 100 K. The spontaneous electric polarization is zero in both phases. A study of dielectric dispersion disclosed two relaxational modes with different relevance in the high and in the low temperature phases. The main features observed in BKI are consistently described by the Landau theory, by assuming a quadratic coupling between the primary order parameter and the electric polarization. (author). Letter-to-the-editor

  5. Mercuric iodide crystals obtained by solvent evaporation using ethanol

    International Nuclear Information System (INIS)

    Millimeter-sized mercuric iodide crystals were fabricated by the solvent evaporation technique using pure ethanol as a solvent. Three different conditions for solution evaporation were tested: (i) in the dark at room temperature; (ii) in the presence of light at room temperature and (iii) in an oven at 40 deg. C. Morphology, structure, optical and electrical properties were investigated using several techniques. Crystals fabricated in the dark show better properties and stability than others, possibly because the larger the energy of the system, the larger the number of induced growth defects. The crystals fabricated in the dark have adequate structure for higher resistivity and activation energy close to half the optical band-gap, as desired. With proper encapsulation these crystals might be good candidates for the development of ionizing radiation sensors.

  6. Photon recycling in lead iodide perovskite solar cells

    Science.gov (United States)

    Pazos-Outón, Luis M.; Szumilo, Monika; Lamboll, Robin; Richter, Johannes M.; Crespo-Quesada, Micaela; Abdi-Jalebi, Mojtaba; Beeson, Harry J.; Vrućinić, Milan; Alsari, Mejd; Snaith, Henry J.; Ehrler, Bruno; Friend, Richard H.; Deschler, Felix

    2016-03-01

    Lead-halide perovskites have emerged as high-performance photovoltaic materials. We mapped the propagation of photogenerated luminescence and charges from a local photoexcitation spot in thin films of lead tri-iodide perovskites. We observed light emission at distances of ≥50 micrometers and found that the peak of the internal photon spectrum red-shifts from 765 to ≥800 nanometers. We used a lateral-contact solar cell with selective electron- and hole-collecting contacts and observed that charge extraction for photoexcitation >50 micrometers away from the contacts arose from repeated recycling between photons and electron-hole pairs. Thus, energy transport is not limited by diffusive charge transport but can occur over long distances through multiple absorption-diffusion-emission events. This process creates high excitation densities within the perovskite layer and allows high open-circuit voltages.

  7. Investigation of sodium iodide hydration and dehydration in moist atmosphere

    International Nuclear Information System (INIS)

    Effect of different factors on NaI hydration and dehydration kinetics under nonequilibrium conditions is studied. NaIx2H2O solid or homogeneous solution is established to be formed at sodium iodide interaction with water vapour depending on air humidity. At low humidity water absorption is not observed. Effect of water vapour pressure, the NaI particle size, the air flux rate over a salt on the absorption rate is studied. The latter points to process rate limitation by diffusion in a gaseous phase. The NaI solution decomposition at light with iodine formation is marked. The character of NaIx2H2O dehydration depends on water vapour removing from the over-salt space. Total water removing before and after crystal hydrate thermal degradation when aqueous solution evaporation occurs, is possible. At 143 deg C the water vapour pressure over solution equals the atmospheric one

  8. Development of mercuric iodide detectors for XAS and XRD measurements

    International Nuclear Information System (INIS)

    A prototype element for an energy dispersive detector (EDD) array was constructed using a Mercuric Iodide detector. Both detector and front end FET could be thermoelectrically cooled. Tested at SSRL, the detector had 250 eV electronic noise and 315 eV resolution at 5.9 keV. K line fluorescence spectra were collected for selected elements between Cl (2622 eV) and Zn (8638 eV). Count rate capability to 60,000 cps was demonstrated. Several detector parameters were measured, including energy linearity, resolution vs. shaping time, and detector dead time. An EXAFS (extended x-ray absorption fine structure) spectrum was recorded and compared to simultaneously collected transmission data

  9. Synthesis of nanodispersible 6-aryl-2,4-diamino-1,3,5-triazine and its derivatives

    International Nuclear Information System (INIS)

    A series of novel branched derivatives of 6-aryl-2,4-diamino-1,3,5-triazine from corresponding aryl nitriles and dicyanodiamide was synthesized. These compounds show a nanodispersibility and good thermal stability.

  10. Exploring the relationship between convenience and fish consumption: A cross-cultural study

    DEFF Research Database (Denmark)

    Olsen, Svein Ottar; Scholderer, Joachim; Brunsø, Karen;

    2007-01-01

    The purpose of the present study is to explore cultural differences in the meaning of convenience and the relationships between convenience, attitudes and fish consumption in five European countries. The results suggest that the meaning of meal convenience is not culture specific, whilst...... the absolute levels of convenience orientation and the perceived inconvenience of fish differ between cultures. Convenience orientation was highest in Poland, followed by Spain, and was lowest in the Netherlands. The relationships between convenience orientation and attitudes towards fish, and convenience...... some earlier findings that fish is generally perceived as a relatively inconvenient type of food. This study suggests that convenience orientation can be crucial to understanding food choice or behaviour only when critical mediating constructs are explored....

  11. 48 CFR 52.249-4 - Termination for Convenience of the Government (Services) (Short Form).

    Science.gov (United States)

    2010-10-01

    ... Convenience of the Government (Services) (Short Form). 52.249-4 Section 52.249-4 Federal Acquisition... termination: Termination for Convenience of the Government (Services) (Short Form) (APR 1984) The Contracting... CONTRACT CLAUSES Text of Provisions and Clauses 52.249-4 Termination for Convenience of the...

  12. Evaluation of quaternary ammonium halides for removal of methyl iodide from flowing air streams

    International Nuclear Information System (INIS)

    The quaternary ammonium halides of several tertiary amines were used as impregnants on activated carbon and were tested for methyl iodide penetration in accordance with test Method A, ASTM D3803, 1979, ''Standard Test Methods for Radio-iodine Testing of Nuclear Grade Gas Phase Adsorbents''. The results suggest that the primary removal mechanism for methyl iodide-131 is isotopic exchange with the quaternary ammonium halide. For example, a 5 wt% impregnation of each of the tetramethyl, tetraethyl, tetrapropyl and tetrabutyl ammonium iodides on activated carbon yielded percent penetrations of 0.47, 0.53, 0.78, and 0.08 respectively when tested according to Method A of ASTM D3803. A sample impregnated with 5% tetramethyl ammonium hydroxide gave a methyl iodide penetration of 64.87%, thus supporting the isotopic exchange mechanism for removal. It has been a generally held belief that the success of tertiary amines as impregnants for radioiodine removal is a result of their ability to complex with the methyl iodide. The results of the work indicates that the superiority of the tertiary amines similar to triethylene diamine and quinuclidine, when compared to their straight chain analogs, is a result of their ease in reacting with methyl iodide-127 to form the quaternary ammonium iodide followed by isotopic exchange

  13. Oxidative addition of aryl chlorides to monoligated palladium(0): A DFT-SCRF study

    DEFF Research Database (Denmark)

    Ahlquist, Mårten Sten Gösta; Norrby, Per-Ola

    2007-01-01

    Oxidative addition of aryl chlorides to palladium has been investigated by hybrid density functional theory methods (B3LYP), including a continuum model describing the solvent implicitly. A series of para-substituted aryl chlorides were studied to see the influence of electronic effects on the...

  14. Copper-Catalyzed Diastereoselective Arylation of Tryptophan Derivatives: Total Synthesis of (+)-Naseseazines A and B

    OpenAIRE

    Kieffer, Madeleine E.; Chuang, Kangway V.; Reisman, Sarah E.

    2013-01-01

    A copper-catalyzed arylation of tryptophan derivatives is reported. The reaction proceeds with high site- and diastereoselectivity to provide aryl pyrroloindoline products in one step from simple starting materials. The utility of this transformation is highlighted in the five-step syntheses of the natural products (+)-naseseazine A and B.

  15. Microwave assisted, ligand free, copper catalyzed reaction of aryl halides with phenyl urea

    Institute of Scientific and Technical Information of China (English)

    Sandip N. Gavade; Ravi S. Balaskar; Madhav S. Mane; Pramod N. Pabrekar; Murlidhar S. Shingare; Dhananjay V. Mane

    2011-01-01

    The ligand free coupling reaction of phenyl urea with different functionalized aryl halides in the presence of air stable Cu2O and t-BuOK as a base gives symmetrical and unsymmetrical diarylureas in relatively high yields. This method is milder than the palladium catalyzed arylation and avoids the use of toxic phosphine ligand.

  16. An efficient method for the N-arylation of phenylurea via copper catalyzed amidation

    Institute of Scientific and Technical Information of China (English)

    Sandip N. Gavade; Ravi S. Balaskar; Madhav S. Mane; Pramod N. Pabrekar; Murlidhar S. Shingare; Dhananjay V. Mane

    2011-01-01

    The coupling reaction of phenylurea with different functionalized aryl halides in the presence of air stable Cul, N,N-dimethylethylenediamine as a ligand, and K3PO4 as a base gives symmetrical and unsymmetrical diarylureas in relatively high yields. This method is milder than the palladium catalyzed arylation and avoids the use of toxic phosphine ligands.

  17. Radical C-H arylations of (hetero)arenes catalysed by gallic acid.

    Science.gov (United States)

    Perretti, Marcelle D; Monzón, Diego M; Crisóstomo, Fernando P; Martín, Víctor S; Carrillo, Romen

    2016-07-12

    Gallic acid efficiently catalyses radical arylations in water-acetone at room temperature. This methodology proved to be versatile and scalable. Therefore, it constitutes a greener alternative to arylation. Moreover, considering that gallic acid is an abundant vegetable tannin, this work also unleashes an alternative method for the reutilisation of bio-wastes. PMID:26804947

  18. Modular approach to novel chiral aryl-ferrocenyl phosphines by Suzuki cross-coupling

    DEFF Research Database (Denmark)

    Jensen, Jakob Feldthusen; Søtofte, Inger; Sorensen, H.O.;

    2002-01-01

    Two novel planar chiral and atropisomeric P,N and P,O aryl-ferrocenyl ligand systems have been developed. The strategy is short and involves a new synthetic approach to aryl-ferrocenyl compounds via a Suzuki cross-coupling procedure. The modular design can easily give access to variety of chiral...

  19. Male coercion and convenience polyandry in a calopterygid damselfly

    Directory of Open Access Journals (Sweden)

    A. Cordero

    2002-08-01

    Full Text Available Copulation in odonates requires female cooperation because females must raise their abdomen to allow intromission. Nevertheless in Calopteryx haemorrhoidalis haemorrhoidalis (Odonata males commonly grasp ovipositing females and apparently force copulations. This has been interpreted as a consequence of extreme population density and male-male competition. We studied this behavior at two sites on a river that had different densities over three years. As predicted, at high densities most matings were forced (i.e. not preceded by courtship, but at low density most were preceded by courtship. Courtship matings were shorter at high density, but density did not affect the duration of forced matings. Females cooperated in forced matings even if they had very few mature eggs. Furthermore, females mated more times if they experienced higher male harassment during oviposition, and at low density second and subsequent matings were more likely to be forced. We interpret these results to mean that females engage in "convenience polyandry", because they gain more by accepting copulation than by resisting males. The results also suggest that females might trade copulations for male protection, because under extreme population density harassment by males is so intense that they can impede oviposition.

  20. Regioselectivity of Arylation of 2,3’-Biquinolyl Dianion

    Directory of Open Access Journals (Sweden)

    Yu. I. Smushkevich

    1999-04-01

    Full Text Available The dianion of 2,3’-biquinolyl with aryl- and hetaryl halides forms the products of arylation to 4’-position, which on treatment with alkyl halides or water yield 1’-alkyl-1’,4’dihydro-2,3’-biquinolyls or 4’-aryl-1’,4’-dihydro-2,3’-biquinolyls respectively. The oxidation of the latter leads to 4’-aryl-2,3’-biquinolyls. The cation dependence of the arylation is shown.

  1. Role of the Aryl Hydrocarbon Receptor in Colon Neoplasia

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Guofeng, E-mail: gxie@medicine.umaryland.edu; Raufman, Jean-Pierre [Division of Gastroenterology and Hepatology, Veterans Administration Maryland Health Care System, University of Maryland School of Medicine, Baltimore, MD 21201 (United States)

    2015-07-31

    For both men and women, colorectal cancer (CRC) is the second leading cause of cancer death in the United States, primarily as a consequence of limited therapies for metastatic disease. The aryl hydrocarbon receptor (AhR) is a ligand-dependent transcription factor with diverse functions in detoxification of xenobiotics, inflammatory responses, and tissue homeostasis. Emerging evidence indicates that AhR also plays an important role in regulating intestinal cell proliferation and tumorigenesis. Here, we review both the pro- and anti-carcinogenic properties of AhR signaling and its potential role as a therapeutic target in CRC.

  2. Role of the Aryl Hydrocarbon Receptor in Colon Neoplasia

    Directory of Open Access Journals (Sweden)

    Guofeng Xie

    2015-07-01

    Full Text Available For both men and women, colorectal cancer (CRC is the second leading cause of cancer death in the United States, primarily as a consequence of limited therapies for metastatic disease. The aryl hydrocarbon receptor (AhR is a ligand-dependent transcription factor with diverse functions in detoxification of xenobiotics, inflammatory responses, and tissue homeostasis. Emerging evidence indicates that AhR also plays an important role in regulating intestinal cell proliferation and tumorigenesis. Here, we review both the pro- and anti-carcinogenic properties of AhR signaling and its potential role as a therapeutic target in CRC.

  3. Catalytic arylation methods from the academic lab to industrial processes

    CERN Document Server

    Burke, Anthony J

    2014-01-01

    A current view of the challenging field of catalytic arylation reactions. Clearly structured, the chapters in this one-stop resource are arranged according to the reaction type, and focus on novel, efficient and sustainable processes, rather than the well-known and established cross-coupling methods.The entire contents are written by two authors with academic and industrial expertise to ensure consistent coverage of the latest developments in the field, as well as industrial applications, such as C-H activation, iron and gold-catalyzed coupling reactions, cycloadditions or novel methodologies

  4. Estrogen receptor and aryl hydrocarbon receptor signaling pathways

    OpenAIRE

    Matthews, Jason; Gustafsson, Jan-Åke

    2006-01-01

    Estrogen receptors (ERs) and the aryl hydrocarbon receptor (AhR) are ligand activated transcription factors and members of the nuclear receptor and bHLH-PAS superfamilies, respectively. AhR is involved in xenobiotic metabolism and in mediating the toxic effects of dioxin-like compounds. Crosstalk has been observed among AhR and nuclear receptors, but has been most well studied with respect to ER signaling. Activated AhR inhibits ER activity through a number of different mechanisms, whereas ER...

  5. Synthetic studies towards putative yuremamine using an iterative C(sp(3))-H arylation strategy.

    Science.gov (United States)

    Calvert, Matthew B; Sperry, Jonathan

    2016-06-28

    An overview of an iterative, 8-aminoquinoline (AQ)-directed C(sp(3))-H arylation strategy towards the pyrroloindole structure initially assigned to the alkaloid yuremamine is described. During initial efforts using a model indane system, it was discovered that the iodoresorcinol unit was not a viable C(sp(3))-H arylation partner when masked as its dimethyl ether but upon switching to a MOM group, the ether oxygen served to stabilise the high valent Pd intermediate during the reaction, thus promoting reductive elimination and leading to acceptable yields of the C(sp(3))-H arylation product. The second C(sp(3))-H arylation with an iodopyrogallol gave a 1,3-diarylated model yuremamine system possessing the desired 1,3-cis relationship. When the successful model studies were applied to a pyrroloindole system in pursuit of yuremamine, it became apparent that C9 underwent competing C(sp(2))-H arylation if left vacant, but installing a tryptamine side chain at this site prevented the desired C(sp(3))-H arylation from occurring altogether. However, a C9-methyl pyrroloindole underwent iterative C(sp(3))-H arylation at C1 with an iodoresorcinol followed by C3 with an iodopyrogallol to give a diarylated product with the aryl groups in the undesired 1,3-trans-relationship, arising from epimerisation at C1 during the second C(sp(3))-H arylation event. Although the synthesis of putative yuremamine was not accomplished, several findings are disclosed that will serve as useful additions to the burgeoning field of directed C(sp(3))-H arylations and related C-H functionalization reactions. PMID:26891188

  6. Hydroformylation of olefins and reductive carbonylation of aryl halides with syngas formed ex situ from dehydrogenative decarbonylation of hexane-1,6-diol

    DEFF Research Database (Denmark)

    Christensen, Stig Holden; Olsen, Esben Paul Krogh; Rosenbaum, Jascha;

    2014-01-01

    A variety of primary alcohols have been investigated as convenient substrates for the ex situ delivery of carbon monoxide and molecular hydrogen in a two-chamber reactor. The gaseous mixture is liberated in one chamber by an iridium-catalysed dehydrogenative decarbonylation of the alcohol...... and then consumed in the other chamber in either a rhodium-catalysed hydroformylation of olefins or a palladium-catalysed reductive carbonylation of aryl halides. Hexane-1,6-diol was found to be the optimum alcohol for both reactions where moderate to excellent yields were obtained of the product aldehydes....... A relatively low pressure of 1.5-2.4 bar was measured in the closed system during the two transformations....

  7. Preparation and Characterization of a Novel Benzimidazolium Br(φ)nsted Acid Ionic Liquid and Its Application in the Synthesis of Arylic Esters

    Institute of Scientific and Technical Information of China (English)

    WANG,Yuan-Yuan; LI,Wei; XU,Cheng-Di; DAI,Li-Yi

    2007-01-01

    A novel Brφnsted acid task specific ionic liquid 1-ethylbenzimidazolium tetrafluoroborate ([Hebim]BF4) with functional benzimidazolium cation was synthesized and characterized by 1H NMR, IR, MS spectra and elemental analysis. This novel ionic liquid was successfully used as dual solvent-catalyst for the synthesis of arylic esters.Higher yields were obtained in the presence of [Hebim]BF4 in comparison with other imidazolium ionic liquids because of the good solubility of the aromatic alcohols and aromatic carboxylic acids in [Hebim]BF4. The product could be separated conveniently from the reaction system, and the ionic liquid could be easily reused after removal of water under vacuum. After 10 times reuse, the selectivity of the ester was still 100%.

  8. Removal efficiency of radioactive methyl iodide on TEDA-impregnated activated carbons

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, C.M.; Gonzalez, J.F.; Roman, S. [Extremadura Univ., Badajoz (Spain). Dept. de Fisica Aplicada

    2011-02-15

    Activated carbons were prepared by different series of carbon dioxide and steam activation from walnut shells for their optimal use as radioactive methyl iodide adsorbents in Nuclear Plants. The knowledge of the most favourable textural characteristics of the activated carbons was possible by the previous study of the commercial activated carbon currently used for this purpose. In order to increase their methyl iodide affinity, the effect of triethylenediamine impregnation was studied at 5 and 10 wt.%. The results obtained indicated that in both cases the adsorption efficiency is markedly improved by the addition of impregnant, which allows the adsorbate uptake to occur not only by physical adsorption, via non-specific interactions (as in non-impregnated carbons) but also by the specific interaction of triethylenediamine with radioactive methyl iodide. Methyl iodide retention efficiencies up to 98.1% were achieved. (author)

  9. Kinetics and mechanism of the mercury(II)-assisted hydrolysis of methyl iodide.

    Science.gov (United States)

    Celo, Valbona; Scott, Susannah L

    2005-04-01

    The kinetics and mechanism of the reaction of aqueous Hg(II) with methyl iodide have been investigated. The overall reaction is best described as Hg(II)-assisted hydrolysis, resulting in quantitative formation of methanol and, in the presence of excess methyl iodide, ultimately, HgI2 via the intermediate HgI+. The kinetics are biexponential when methyl iodide is in excess. At 25 degrees C, the acceleration provided by Hg2+ is 7.5 times greater than that caused by HgI+, while assistance of hydrolysis was not observed for HgI2. Thus, the reactions are not catalytic in Hg(II). The kinetics are consistent with an SN2-M+ mechanism involving electrophilic attack at iodide. As expected, methylation of mercury is not a reaction pathway; traces of methylmercury(II) are artifacts of the extraction/preconcentration procedure used for methylmercury analysis.

  10. Fluorescence characteristics of 5-amino salicylic acid: An iodide recognition study

    Science.gov (United States)

    Arora, Priyanka; Suyal, Kanchan; Joshi, Neeraj K.; Joshi, Hem Chandra; Pant, Sanjay

    In this paper we report the effect of iodide on the fluorescence of 5-amino salicylic acid (5-ASA). In the absence of iodide, prominent blue green (BG) emission band at ˜465 nm (broad) is observed in aprotic solvents whereas violet (V) emission at ˜408 nm, blue green (BG) at ˜480 nm and green (G) at ˜500 nm are observed in case of protic solvents. On the addition of iodide ion (I-), the intensity of BG fluorescence is enhanced in case of aprotic solvents. On the other hand the G band is enhanced in protic solvents and decrease in the intensity of the V band is observed. The effect of hydrogen bonding as well as the interplay of neutral and ionic species is invoked to explain the observed results. The study projects the application of this system in iodide recognition in protic/aprotic environments.

  11. Direct (Hetero)arylation Polymerization: Trends and Perspectives.

    Science.gov (United States)

    Bura, Thomas; Blaskovits, J Terence; Leclerc, Mario

    2016-08-17

    Conjugated polymers have attracted much attention in recent years, as they can combine the best features of metals or inorganic semiconducting materials (excellent electrical and optical properties) with those of synthetic polymers (mechanical flexibility, simple processing, and low-cost production), thereby creating altogether new scientific synergies and technological opportunities. In the search for more efficient synthetic methods for the preparation of conjugated polymers, this Perspective reports advances in the field of direct (hetero)arylation polymerization. This recently developed polymerization method encompasses the formation of carbon-carbon bonds between simple (hetero)arenes and (hetero)aryl halides, reducing both the number of synthetic steps and the production of organometallic byproducts. Along these lines, we describe the most general and adaptable reaction conditions for the preparation of high-molecular-weight, defect-free conjugated polymers. We also discuss the bottleneck presented by the utilization of certain brominated thiophene units and propose some potential solutions. It is, however, firmly believed that this polymerization method will become a versatile tool in the field of conjugated polymers by providing a desirable atom-economical alternative to standard cross-coupling polymerization reactions. PMID:27463826

  12. Aryl Diazonium Chemistry for the Surface Functionalization of Glassy Biosensors

    Science.gov (United States)

    Zheng, Wei; van den Hurk, Remko; Cao, Yong; Du, Rongbing; Sun, Xuejun; Wang, Yiyu; McDermott, Mark T.; Evoy, Stephane

    2016-01-01

    Nanostring resonator and fiber-optics-based biosensors are of interest as they offer high sensitivity, real-time measurements and the ability to integrate with electronics. However, these devices are somewhat impaired by issues related to surface modification. Both nanostring resonators and photonic sensors employ glassy materials, which are incompatible with electrochemistry. A surface chemistry approach providing strong and stable adhesion to glassy surfaces is thus required. In this work, a diazonium salt induced aryl film grafting process is employed to modify a novel SiCN glassy material. Sandwich rabbit IgG binding assays are performed on the diazonium treated SiCN surfaces. Fluorescently labelled anti-rabbit IgG and anti-rabbit IgG conjugated gold nanoparticles were used as markers to demonstrate the absorption of anti-rabbit IgG and therefore verify the successful grafting of the aryl film. The results of the experiments support the effectiveness of diazonium chemistry for the surface functionalization of SiCN surfaces. This method is applicable to other types of glassy materials and potentially can be expanded to various nanomechanical and optical biosensors. PMID:26985910

  13. Horseradish Peroxidase-Mediated, Iodide-Catalyzed Cascade Reaction for Plasmonic Immunoassays.

    Science.gov (United States)

    Xianyu, Yunlei; Chen, Yiping; Jiang, Xingyu

    2015-11-01

    This report outlines an enzymatic cascade reaction for signal transduction and amplification for plasmonic immunoassays by using horseradish peroxidase (HRP)-mediated aggregation of gold nanoparticles (AuNPs). HRP-catalyzed oxidation of iodide and iodide-catalyzed oxidation of cysteine is employed to modulate the plasmonic signals of AuNPs. It agrees well with the current immunoassay platforms and allows naked-eye readout with enhanced sensitivity, which holds great promise for applications in resource-constrained settings.

  14. Polarization Effects in Methylammonium Lead Iodide Electronic Devices

    Science.gov (United States)

    Labram, John; Fabini, Douglas; Perry, Erin; Lehner, Anna; Wang, Hengbin; Glaudell, Anne; Wu, Guang; Evans, Hayden; Buck, David; Cotta, Robert; Echegoyen, Luis; Wudl, Fred; Seshadri, Ram; Chabinyc, Michael

    The immense success of group IV and III-V semiconductors has resulted in disruptive new photovoltaic (PV) cell technologies emerging extremely infrequently. For this reason, the recent progress in Methylammonium Lead Iodide (MAPbI3) solar cells can be viewed as a highly significant historic event. Despite the staggering recent progress made in reported power conversion efficiency (PCE), debate remains intense on the nature of the various instabilities synonymous with these devices. Using various electronic device measurements, we here present a body of experimental evidence consistent with the existence of a mobile ionic species within the MAPbI3 perovskite. Temperature-dependent transistor measurements reveal operating FET devices only below approximately 210K. This is attributed to ionic screening of the (otherwise charge-neutral) semiconductor-dielectric interface. Temperature-dependent pulsed-gate and impedance spectroscopy experiments also reveal behavior consistent with this interpretation. MAPbI3 PV cells were found to possess a PCE which decreases significantly below 210K. Combined, these set of measurements provide an interesting and consistent description of the internal processes at play within the MAPbI3 perovskite structure.

  15. Thermopower and activation energy of silver iodide based superionic materials

    International Nuclear Information System (INIS)

    Silver iodide based glasses, 60Agl-20Ag sub 2 O-20B sub 2O sub 3, 6 Agl-20Ag sub 2 O-20 MoO sub 3 and 60Agl-20Ag sub 2O-20WO sub 3, all in the mol % ratio, were prepared by rapidly quenching the melts of the chemicals in a stainless steel container; kept in a liquid nitrogen bath. The glassy nature of the as-quenched materials was confirmed by X-ray diffraction (XRD). The electrical conductivity of the glasses was measured at various temperatures ranging from 30 to 70 degree C using an impedance bridge operating in the frequency range between 40 Hz to 100 kHz. The plot of In σT versus 1000/T for each glassy material obeys Arrhenius law and the activation energy obtained is between 0.2 to 0.3 eV. Thermopower measurement was also carried out in the same temperature range as the conductivity measurement to obtain the heat of transport

  16. Chloride, bromide and iodide scintillators with europium doping

    Science.gov (United States)

    Zhuravleva, Mariya; Yang, Kan

    2014-08-26

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  17. Digermylene Oxide Stabilized Group 11 Metal Iodide Complexes.

    Science.gov (United States)

    Yadav, Dhirendra; Siwatch, Rahul Kumar; Sinhababu, Soumen; Karwasara, Surendar; Singh, Dharmendra; Rajaraman, Gopalan; Nagendran, Selvarajan

    2015-12-01

    Use of a substituted digermylene oxide as a ligand has been demonstrated through the isolation of a series of group 11 metal(I) iodide complexes. Accordingly, the reactions of digermylene oxide [{(i-Bu)2ATIGe}2O] (ATI = aminotroponiminate) (1) with CuI under different conditions afforded [({(i-Bu)2ATIGe}2O)2(Cu4I4)] (2) with a Cu4I4 octahedral core, [({(i-Bu)2ATIGe}2O)2(Cu3I3)] (3) with a Cu3I3 core, and [{(i-Bu)2ATIGe}2O(Cu2I2)(C5H5N)2] (4) with a butterfly-type Cu2I2 core. The reactions of compound 1 with AgI and AuI produced [({(i-Bu)2ATIGe}2O)2(Ag4I4)] (5) with a Ag4I4 octahedral core and [{(i-Bu)2ATIGe}2O(Au2I2)] (6) with a Au2I2 core, respectively. The presence of metallophilic interactions in these compounds is shown through the single-crystal X-ray diffraction and atom-in-molecule (AIM) studies. Preliminary photophysical studies on compound 6 are also carried out. PMID:26558406

  18. Persistent photovoltage in methylammonium lead iodide perovskite solar cells

    Directory of Open Access Journals (Sweden)

    A. Baumann

    2014-08-01

    Full Text Available We herein perform open circuit voltage decay (OCVD measurements on methylammonium lead iodide (CH3NH3PbI3 perovskite solar cells to increase the understanding of the charge carrier recombination dynamics in this emerging technology. Optically pulsed OCVD measurements are conducted on CH3NH3PbI3 solar cells and compared to results from another type of thin-film photovoltaics, namely, the two reference polymer–fullerene bulk heterojunction solar cell devices based on P3HT:PC60BM and PTB7:PC70BM blends. We observe two very different time domains of the voltage transient in the perovskite solar cell with a first drop on a short time scale that is similar to the decay in the studied organic solar cells. However, 65%–70% of the maximum photovoltage persists on much longer timescales in the perovskite solar cell than in the organic devices. In addition, we find that the recombination dynamics in all time regimes are dependent on the starting illumination intensity, which is also not observed in the organic devices. We then discuss the potential origins of these unique behaviors.

  19. Aqueous high-temperature chemistry of carbo- and heterocycles. 29. Reactions of aryl hydrocarbons, aryl N-oxides and aryl carbonyl compounds in supercritical water at 460{degree}C

    Energy Technology Data Exchange (ETDEWEB)

    Katritzky, A.R.; Ignatchenko, E.S.; Allin, S.M.; Barcock, R.A.; Siskin, M.; Hudson, C.W. [University of Florida, Gainesville, FL (United States). Center for Heterocyclic Compounds, Dept. of Chemistry

    1997-01-01

    A series of aryl hydrocarbons, aryl N-oxides, and aryl carbonyl compounds were subjected to thermolysis at 460{degree}C in water alone, in 15% aqueous formic acid, in 15% aqueous sodium formate, and, for comparison of purely thermal reactions, in cyclohexane. The runs were carried out initially for 7 min and, in most cases, also for 1 h. The aryl carbonyl substrates underwent mainly carbonyl reduction mainly under reduction conditions, with ring opening only observed in significant amounts for 1,4-naphthoquinone and 3,4-benzocoumarin. The arenes produced mainly reduction products with only low yields of ring-opened products observed. Aryl oximes underwent significant denitrogenation and subsequent reduction with only very little cleavage to simpler aromatic systems. The N-oxides underwent deoxygenation, and in the case of isoquinoline, ring opening of the heterocyclce was prevalent. 2-Aminobiphenyl was denitrogenated and cleaved to simpler systems in cyclohexane, but in the aqueous systems it underwent mainly cyclization to yield carbazole with only low yields of denitrogenated products. 2-Phenylphenol was unreactive under aqueous conditions with only low yields of deoxygenated products observed. 11 refs., 15 figs., 1 tab.

  20. Lead iodide X-ray and gamma-ray spectrometers for room and high temperature operation

    Energy Technology Data Exchange (ETDEWEB)

    Hermon, H.; James, R.B.; Cross, E. [and others

    1997-02-01

    In this study, we report on the results of the investigation of lead iodide material properties. The effectiveness of zone refining purification methods on the material purity is determined by ICP-MS and ICP-OES and correlated to the electrical and physical material properties. We show that this zone refining method is very efficient in removing impurities from lead iodide and we also determine the segregation coefficient for some of these impurities. Triple axis x- ray diffraction (TAD) analysis has been used to determine the crystalline perfection of the lead iodide after applying various cutting, etching, and fabrication methods. The soft lead iodide crystal was found to be damaged when cleaved by a razor blade, but by using a diamond wheel saw, followed by etching, the crystallinity of the material was improved, as observed by TAD. Low temperature photoluminescence also indicates an improvement in the material properties of the purified lead iodide. Electrical properties of lead iodide such as carrier mobility, were calculated based on carrier- phonon scattering. The results for the electrical properties were in good agreement with the experimental data.

  1. Critical Evaluation of Acetylthiocholine Iodide and Acetylthiocholine Chloride as Substrates for Amperometric Biosensors Based on Acetylcholinesterase

    Directory of Open Access Journals (Sweden)

    Gabriel-Lucian Radu

    2013-01-01

    Full Text Available Numerous amperometric biosensors have been developed for the fast analysis of neurotoxic insecticides based on inhibition of cholinesterase (AChE. The analytical signal is quantified by the oxidation of the thiocholine that is produced enzymatically by the hydrolysis of the acetylthiocholine pseudosubstrate. The pseudosubstrate is a cation and it is associated with chloride or iodide as corresponding anion to form a salt. The iodide salt is cheaper, but it is electrochemically active and consequently more difficult to use in electrochemical analytical devices. We investigate the possibility of using acetylthiocholine iodide as pseudosubstrate for amperometric detection. Our investigation demonstrates that operational conditions for any amperometric biosensor that use acetylthiocholine iodide must be thoroughly optimized to avoid false analytical signals or a reduced sensitivity. The working overpotential determined for different screen-printed electrodes was: carbon-nanotubes (360 mV, platinum (560 mV, gold (370 mV, based on a catalytic effect of iodide or cobalt phthalocyanine (110 mV, but with a significant reduced sensitivity in the presence of iodide anions.

  2. Experimental study of retinoic acid on improving iodide uptake in MCF-7 breast cancer cells

    Institute of Scientific and Technical Information of China (English)

    FU Hong-Liang; WU Jing-Chuan; DU Xue-Liang; LI Jia-Ning; WU Zhen; ZOU Ren-Jian

    2005-01-01

    The study aims to investigate the effect of retinoic acid on the iodide uptake of MCF-7 cells and its mechanism. The iodide uptake and expression of hNIS(human sodium/iodide symporter)mRNA in the breast cancer MCF-7 cells were compared individually before and after the intervention of all-trans retinoic acid (ATRA) with the iodide uptake assay and RT-PCR. The following results are obtained: (1) when treated with all-trans retinoic acid in the concentration of 1.0 μmol/L, the capacity of iodide uptake of MCF-7 cells reached about 1.5 times of the basal state; (2) 12 h after the intervention of 1.0 μmol/L ATRA, the hNISmRNA expression of the MCF-7 cells reached maximum. The study shows that all-trans retinoic acid has the effect to improve the iodide uptake of the MCF-7 cells and this effect may result from its up-regulation of the hNISmRNA expression.

  3. Modelling iodide – iodate speciation in atmospheric aerosol: Contributions of inorganic and organic iodine chemistry

    Directory of Open Access Journals (Sweden)

    S. Pechtl

    2007-01-01

    Full Text Available The speciation of iodine in atmospheric aerosol is currently poorly understood. Models predict negligible iodide concentrations but accumulation of iodate in aerosol, both of which is not confirmed by recent measurements. We present an updated aqueous phase iodine chemistry scheme for use in atmospheric chemistry models and discuss sensitivity studies with the marine boundary layer model MISTRA. These studies show that iodate can be reduced in acidic aerosol by inorganic reactions, i.e., iodate does not necessarily accumulate in particles. Furthermore, the transformation of particulate iodide to volatile iodine species likely has been overestimated in previous model studies due to negligence of collision-induced upper limits for the reaction rates. However, inorganic reaction cycles still do not seem to be sufficient to reproduce the observed range of iodide – iodate speciation in atmospheric aerosol. Therefore, we also investigate the effects of the recently suggested reaction of HOI with dissolved organic matter to produce iodide. If this reaction is fast enough to compete with the inorganic mechanism, it would not only directly lead to enhanced iodide concentrations but, indirectly via speed-up of the inorganic iodate reduction cycles, also to a decrease in iodate concentrations. Hence, according to our model studies, organic iodine chemistry, combined with inorganic reaction cycles, is able to reproduce observations. The presented chemistry cycles are highly dependent on pH and thus offer an explanation for the large observed variability of the iodide – iodate speciation in atmospheric aerosol.

  4. A selective iodide ion sensor electrode based on functionalized ZnO nanotubes.

    Science.gov (United States)

    Ibupoto, Zafar Hussain; Khun, Kimleang; Willander, Magnus

    2013-01-01

    In this research work, ZnO nanotubes were fabricated on a gold coated glass substrate through chemical etching by the aqueous chemical growth method. For the first time a nanostructure-based iodide ion selective electrode was developed. The ZnO nanotubes were functionalized with miconazole ion exchanger and the electromotive force (EMF) was measured by the potentiometric method. The iodide ion sensor exhibited a linear response over a wide range of concentrations (1 × 10-6 to 1 × 10-1 M) and excellent sensitivity of -62 ± 1 mV/decade. The detection limit of the proposed sensor was found to be 5 × 10-7 M. The effects of pH, temperature, additive, plasticizer and stabilizer on the potential response of iodide ion selective electrode were also studied. The proposed iodide ion sensor demonstrated a fast response time of less than 5 s and high selectivity against common organic and the inorganic anions. All the obtained results revealed that the iodide ion sensor based on functionalized ZnO nanotubes may be used for the detection of iodide ion in environmental water samples, pharmaceutical products and other real samples. PMID:23385412

  5. A Selective Iodide Ion Sensor Electrode Based on Functionalized ZnO Nanotubes

    Directory of Open Access Journals (Sweden)

    Magnus Willander

    2013-02-01

    Full Text Available In this research work, ZnO nanotubes were fabricated on a gold coated glass substrate through chemical etching by the aqueous chemical growth method. For the first time a nanostructure-based iodide ion selective electrode was developed. The ZnO nanotubes were functionalized with miconazole ion exchanger and the electromotive force (EMF was measured by the potentiometric method. The iodide ion sensor exhibited a linear response over a wide range of concentrations (1 × 10−6 to 1 × 10−1 M and excellent sensitivity of –62 ± 1 mV/decade. The detection limit of the proposed sensor was found to be 5 × 10−7 M. The effects of pH, temperature, additive, plasticizer and stabilizer on the potential response of iodide ion selective electrode were also studied. The proposed iodide ion sensor demonstrated a fast response time of less than 5 s and high selectivity against common organic and the inorganic anions. All the obtained results revealed that the iodide ion sensor based on functionalized ZnO nanotubes may be used for the detection of iodide ion in environmental water samples, pharmaceutical products and other real samples.

  6. The effect of elemental and hydrocarbon impurities on mercuric iodide gamma ray detector performance

    Science.gov (United States)

    Cross, Eilene S.; Buffleben, George; Soria, Ed; James, Ralph; Schieber, Michael; Natarajan, Raj; Gerrish, Vern

    Mercuric iodide is a room temperature semiconductor material that is used for gamma ray and x-ray radiation detection. Mercuric iodide is synthesized from mercuric chloride and potassium iodide and is then purified by a series of melts and sublimation steps and by zone refining. The mercuric iodide is grown into crystals and platelets and then fabricated into detectors. Elemental contamination may be a determining factor in the performance of these detectors. These contaminates may be present in the starting material or may be introduced during, or be unaffected by, the purification, growth or fabrication steps. Methods have been developed for the analysis of trace levels of elemental contamination. Inductively Coupled Plasma/Mass Spectroscopy (ICP/MS), Inductively Coupled Plasma/Optical Emission Spectroscopy (ICP/OES) and Gas Chromatography/Mass Spectroscopy (GC/MS) are used to determine sub ppm levels of many trace elemental impurities. Trace levels of many elemental impurities in the raw mercuric iodide are significantly reduced during the purification and zone refining processes. Though the levels of impurities are reduced, poor performing mercuric iodide detectors have contamination levels remaining or reintroduced which are higher for Ag, Al, Ca, Cu, Mg, Mn, Na, Pb and Zn than detectors with good gamma ray response. This paper will discuss the analytical methodology, the effects of purification on impurity levels, and the correlation between detector performance and impurity levels.

  7. An aryl dioxygenase shows remarkable double dioxygenation capacity for diverse bis-aryl compounds, provided they are carbocyclic.

    Science.gov (United States)

    Overwin, Heike; González, Myriam; Méndez, Valentina; Seeger, Michael; Wray, Victor; Hofer, Bernd

    2016-09-01

    The bacterial dioxygenation of mono- or polycyclic aromatic compounds is an intensely studied field. However, only in a few cases has the repeated dioxygenation of a substrate possessing more than a single aromatic ring been described. We previously characterized the aryl-hydroxylating dioxygenase BphA-B4h, an artificial hybrid of the dioxygenases of the biphenyl degraders Burkholderia xenovorans LB400 and Pseudomonas sp. strain B4-Magdeburg, which contains the active site of the latter enzyme, as an exceptionally powerful biocatalyst. We now show that this dioxygenase possesses a remarkable capacity for the double dioxygenation of various bicyclic aromatic compounds, provided that they are carbocyclic. Two groups of biphenyl analogues were examined: series A compounds containing one heterocyclic aromatic ring and series B compounds containing two homocyclic aromatic rings. Whereas all of the seven partially heterocyclic biphenyl analogues were solely dioxygenated in the homocyclic ring, four of the six carbocyclic bis-aryls were converted into ortho,meta-hydroxylated bis-dihydrodiols. Potential reasons for failure of heterocyclic dioxygenations are discussed. The obtained bis-dihydrodiols may, as we also show here, be enzymatically re-aromatized to yield the corresponding tetraphenols. This opens a way to a range of new polyphenolic products, a class of compounds known to exert multiple biological activities. Several of the obtained compounds are novel molecules. PMID:27147529

  8. Aryl hydrocarbon receptor activation leads to impairment of estrogen-driven chicken vitellogenin promoter activity in LMH cells.

    Science.gov (United States)

    Bussmann, Ursula A; Pérez Sáez, Juan M; Bussmann, Leonardo E; Barañao, J Lino

    2013-03-01

    The aryl hydrocarbon receptor (AHR) is a ligand-activated transcription factor that mediates most of the toxic effects of environmental contaminants. Among the multiple pleiotropic responses elicited by AHR agonists, the antiestrogenic and endocrine-disrupting action of the receptor activation is one of the most studied. It has been demonstrated that some AHR agonists disrupt estradiol-induced vitellogenin synthesis in the fish liver via a mechanism that involves crosstalk between the AHR and the estrogen receptor (ER). Chicken hepatocytes have become a model for the study of AHR action in birds and the induction of the signal and its effect in these cells are well established. However, the impact of AHR activation on estradiol-regulated responses in the chicken liver remains to be demonstrated. The aim of the present study was, therefore, to determine the effect of AHR action on ER-driven transcription in a convenient model of chicken liver cells. For this purpose, we designed a reporter construct bearing the 5' regulatory region of the chicken vitellogenin II gene and used it to transfect chicken hepatoma LMH cells. We found that β-naphthoflavone represses ER-driven vitellogenin promoter activity and that this action is mediated by the AHR. This inhibitory crosstalk between both pathways appears to be unidirectional, since estradiol did not alter the transcript levels of an AHR target gene. Besides, and highly relevant, we show that LMH cell line transfected with a reporter construct bearing the chicken vitellogenin promoter sequence is a useful and convenient model for the study of AHR-ER interaction in chicken liver-derived cells. PMID:23103859

  9. Mild Palladium-Catalyzed Cyanation of (Hetero)aryl Halides and Triflates in Aqueous Media

    OpenAIRE

    Cohen, Daniel T.; Buchwald, Stephen L.

    2015-01-01

    A mild, efficient, and low-temperature palladium-catalyzed cyanation of (hetero)aryl halides and triflates is reported. Previous palladium-catalyzed cyanations of (hetero)aryl halides have required higher temperatures to achieve good catalytic activity. This current reaction allows the cyanation of a general scope of (hetero)aryl halides and triflates at 2–5 mol % catalyst loadings with temperatures ranging from rt to 40 °C. This mild method was applied to the synthesis of lersivirine, a reve...

  10. Well-Defined Copper(I) Fluoroalkoxide Complexes for Trifluoroethoxylation of Aryl and Heteroaryl Bromides

    KAUST Repository

    Huang, Ronglu

    2015-03-17

    © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Copper(I) fluoroalkoxide complexes bearing dinitrogen ligands were synthesized and the structure and reactivity of the complexes toward trifluoroethoxylation, pentafluoropropoxylation, and tetrafluoropropoxylation of aryl and heteroaryl bromides were investigated. Efficiency drive: A series of copper(I) fluoroalkoxide complexes bearing N,N ligands have been prepared and structurally characterized. These well-defined complexes serve as efficient reagents for the fluoroalkoxylation of aryl and heteroaryl bromides to produce a wide range of trifluoroethyl, pentafluoropropyl, and tetrafluoropropyl (hetero)aryl ethers in good to excellent yields.

  11. Mechanistic Considerations in the Synthesis of 2-Aryl-Indole Analogues under Bischler-Mohlau Conditions

    Science.gov (United States)

    MacDonough, Matthew T.; Shi, Zhe; Pinney, Kevin G.

    2015-01-01

    Mechanistic insight into the pathway of the Bischler-Mohlau indole formation reaction is provided by isotopic labeling utilizing judicious incorporation of a 13C atom within the α-bromoacetophenone analogue reactant. The resulting rearranged 2-aryl indole, isolated as the major product, located the 13C isotope label at the methine carbon of the fused five-membered heterocyclic ring, which suggested that the mechanistic pathway of cyclization, in this specific example, required two equivalents of the aniline analogue reactant partner and proceeded through an imine intermediate rather than by direct formation of the corresponding 3-aryl indole accompanied by a concomitant 1,2-aryl shift rearrangement. PMID:26973358

  12. Shoppers Perception of Retail Service Quality: Supermarkets versus Small Convenience Shops (Dukas) in Kenya

    OpenAIRE

    Sarah Wambui Kimani; Elias Kiarie Kagira; Lydia Kendi; Cleophas Muhavini Wawire

    2012-01-01

    The purpose of this paper was to determine shoppers perceptions of service quality offered in Kenyan supermarkets and very small convenience shops. A cross sectional design of explorative nature was adopted for this study to evaluate the shoppers¡¯ perception of the convenience shops and supermarkets. Data from semi-structured questionnaire was analyzed using factor analyses and Pearson correlation analysis. Factor analysis revealed the following as important factors that customers of conveni...

  13. Effects of Consumer-Perceived Convenience on Shopping Intention in Mobile Commerce: An Empirical study

    OpenAIRE

    Wen-Jang Jih

    2007-01-01

    Wireless communication and Internet services are converging to provide an unprecedented level of convenience for online shopping. Although the concept of consumer-perceived convenience has been extensively discussed in marketing and consumer behavior literature, there still is a lack of empirical validation in the context of mobile commerce. This study was conducted to examine the effect of convenience on customers’ intention of shopping via their mobile communication devices. The primary d...

  14. A glucose bio-battery prototype based on a GDH/poly(methylene blue) bioanode and a graphite cathode with an iodide/tri-iodide redox couple.

    Science.gov (United States)

    Wang, Jen-Yuan; Nien, Po-Chin; Chen, Chien-Hsiao; Chen, Lin-Chi; Ho, Kuo-Chuan

    2012-07-01

    A glucose bio-battery prototype independent of oxygen is proposed based on a glucose dehydrogenase (GDH) bioanode and a graphite cathode with an iodide/tri-iodide redox couple. At the bioanode, a NADH electrocatalyst, poly(methylene blue) (PMB), which can be easily grown on the electrode (screen-printed carbon paste electrode, SPCE) by electrodeposition, is harnessed and engineered. We find that carboxylated multi-walled carbon nanotubes (MWCNTs) are capable of significantly increasing the deposition amount of PMB and thus enhancing the PMB's electrocatalysis of NADH oxidation and the glucose bio-battery's performance. The choice of the iodide/tri-iodide redox couple eliminates the dependence of oxygen for this bio-battery, thus enabling the bio-battery with a constant current-output feature similar to that of the solar cells. The present glucose bio-battery prototype can attain a maximum power density of 2.4 μW/cm(2) at 25 °C. PMID:22541949

  15. Characterization of strontium iodide scintillators with silicon photomultipliers

    Science.gov (United States)

    Mitchell, Lee J.; Phlips, Bernard

    2016-06-01

    This work characterizes a commercially available europium-doped strontium iodide detector recently developed by Radiation Monitoring Devices (RMD). The detector has been chosen for a space-based mission scheduled to launch in early 2017. The primary goal of this work was to characterize the detector's response over the expected operational range of -10 °C to 30 °C as well as the expected operational voltage range of +26.5-+28.5 V and identify background interferences that may develop due to neutron activation produced by cosmic-ray interactions. The 8 mm×8 mm×20 mm detectors use KETEK silicon photomultipliers (SiPM), with an active area of 6 mmx6 mm (KETEK PM6660). Our results show substantial integral nonlinearity due to the SiPM ranging from 0% to 25% at room temperature over the energy range of 80-2614 keV. The nonlinearity, a function of temperature and overvoltage, leads to an underestimate of the full width at half max (FWHM), which is 2.6% uncorrected at 662 keV and 3.8% corrected at 662 keV. The temperature dependence of the detector results in a noise threshold that increases substantially above 30 °C due to the SiPM dark rate. In an effort to simulate the harsh environment of space, neutron activation of the detector was also explored. Gamma-ray lines at 127 keV and 164 keV were observed in the detector along with Kα x-rays associated with europium. Beta decay from europium- and iodine-activation products were also observed within the detector.

  16. THERAPY OF GRAVES’ DISEASE WITH SODIUM IODIDE-131

    Directory of Open Access Journals (Sweden)

    I Wayan Hartadi Noor

    2013-11-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Graves’ disease is the most common form of thyrotoxicosis, with a peak incidence in the 20-40 year of age group. Females are involved about five times more commonly than male. The easiest sign to recognize patients with Graves’ disease is the present of Graves’ ophthalmopathy. The diagnosis of Graves’ disease may sometimes base only on a physical examination and a medical history. Diffuse thyroid enlargement and sign of thyrotoxicosis, mainly ophthalmopathy and to lesser extent dermopathy, usually adequate for diagnosis. TSH test combined with FT4 test is usually the first laboratory test performs in these patients. The patients suffered Graves’ disease can be treated with antithyroid drug therapy or undergo subtotal Thyroidectomy. Another therapy is by using sodium iodide-131, where this therapy has advantages including easy administration, effectiveness, low expense, and absence of pain. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  17. Imaging with polycrystalline mercuric iodide detectors using VLSI readout

    Energy Technology Data Exchange (ETDEWEB)

    Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L.; Schieber, M.; Zuck, A.; Melekhov, L.; Saado, Y.; Hermon, H.; Nissenbaum, J

    1999-06-01

    Potentially low cost and large area polycrystalline mercuric iodide room-temperature radiation detectors, with thickness of 100-600 {mu}m have been successfully tested with dedicated low-noise, low-power mixed signal VLSI electronics which can be used for compact, imaging solutions. The detectors are fabricated by depositing HgI{sub 2} directly on an insulating substrate having electrodes in the form of microstrips and pixels with an upper continuous electrode. The deposition is made either by direct evaporation or by screen printing HgI{sub 2} mixed with glue such as Poly-Vinyl-Butiral. The properties of these first-generation detectors are quite uniform from one detector to another. Also for each single detector the response is quite uniform and no charge loss in the inter-electrode space have been detected. Because of the low cost and of the polycrystallinity, detectors can be potentially fabricated in any size and shape, using standard ceramic technology equipment, which is an attractive feature where low cost and large area applications are needed. The detectors which act as radiation counters have been tested with a beta source as well as in a high-energy beam of 100 GeV muons at CERN, connected to VLSI, low noise electronics. Charge collection efficiency and uniformity have been studied. The charge is efficiently collected even in the space between strips indicating that fill factors of 100% could be reached in imaging applications with direct detection of radiation. Single photon counting capability is reached with VLSI electronics. These results show the potential of this material for applications demanding position sensitive, radiation resistant, room-temperature operating radiation detectors, where position resolution is essential, as it can be found in some applications in high-energy physics, nuclear medicine and astrophysics.

  18. Alkyl and aryl neoalkanamides: highly effective insect repellents.

    Science.gov (United States)

    Steltenkamp, R J; Hamilton, R L; Cooper, R A; Schal, C

    1992-03-01

    Alkyl and aryl neoalkanamides with a total carbon number between 11 and 14, or within a molecular weight range between 185 and 227, were highly effective repellents of male German cockroaches, Blattella germanica (L.). Comparison with known repellents showed that members of this unique family of secondary amides are among the most effective and long-lasting repellents of cockroaches examined to date. In assays with females and nymphs of the German cockroach, male American cockroaches, Periplaneta americana (L.), and carpenter ant workers, Camponotus pennsylvanicus (De Geer) methyl neodecanamide, propyl neodecanamide, and methyl neotridecanamide were found highly repellent. Because of their broad spectrum of activity, longevity, and safety, these compounds, along with several other members of this family, have important applications as repellents of nuisance pests and of arthropods of public health importance. PMID:1495022

  19. Aryl Polyphosphonates: Useful Halogen-Free Flame Retardants for Polymers

    Directory of Open Access Journals (Sweden)

    Li Chen

    2010-10-01

    Full Text Available Aryl polyphosphonates (ArPPN have been demonstrated to function in wide applications as flame retardants for different polymer materials, including thermosets, polycarbonate, polyesters and polyamides, particularly due to their satisfactory thermal stability compared to aliphatic flame retardants, and to their desirable flow behavior observed during the processing of polymeric materials. This paper provides a brief overview of the main developments in ArPPN and their derivatives for flame-retarding polymeric materials, primarily based on the authors’ research work and the literature published over the last two decades. The synthetic chemistry of these compounds is discussed along with their thermal stabilities and flame-retardant properties. The possible mechanisms of ArPPN and their derivatives containing hetero elements, which exhibit a synergistic effect with phosphorus, are also discussed.

  20. Novel aryl carbamate derivatives of metronidazole as potential antiamoebic agents.

    Science.gov (United States)

    Hayat, Faisal; Wahedi, Hussain Mustatab; Park, Seonghyeok; Tariq, Saba; Azam, Amir; Shin, Dongyun

    2016-01-01

    A series of novel aryl carbamate derivatives of metronidazole (MNZ) were designed, synthesized, and screened for antiamoebic activity. As compared to MNZ, most of the derivatives exhibited moderate to excellent activity against the HM1:IMSS strain of Entamoeba histolytica. Compounds 7, 14, 16, 19, and 21 exhibited the most promising antiamoebic activity with IC50 values of 0.24, 0.08, 0.26, 0.26, and 0.15 μM, respectively, compared to that of MNZ (1.78 μM). Moreover, from the toxicological studies of these compounds on human melanocytes, the melan-a cell line revealed that the potent compounds are nontoxic at concentrations ranging from 2.5 to 50 μM. PMID:26597858

  1. Degradation of β-Aryl Ether Bonds in Transgenic Plants

    DEFF Research Database (Denmark)

    Mnich, Ewelina

    system to degrade lignin. An important step in this degradation is cleavage of the most abundant lignin linkage type, β-aryl ether. It is cleaved in a three step reaction catalyzed by a dehydrogenase, a glutathione S-transferase and a glutathione lyase. Due to the nature of the enzymatic reactions...... of the cell wall. The aim of the study was to alter lignin structure by expression in plants of the enzymes from S. paucimobilis involved in ether bond degradation (LigDFG). Arabidopsis thaliana and Brachypodium distachyon transgenic lines were generated and characterized with respect to lignin structure...... be degraded by LigDFG, which can presumably cause loosening of the lignin-ferulate-polysaccharide matrix. In a xylanase hydrolysis of Brachypodium transgenic stems, the release of arabinose and xylose was increased compared to wild type. The data presented demonstrate that introduction of lignin degrading...

  2. Aryl hydrocarbon mono-oxygenase activity in human lymphocytes

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, G.D.; Schuresko, D.D.

    1981-06-01

    Aryl hydrocarbon mono-oxygenase (AHM), an enzyme of key importance in metabolism of xenobiotic chemicals such as polynuclear aromatic hydrocarbons (PNA), is present in human lymphocytes. Studies investing the relation of activity of AHM in human lymphocytes to parameters such as disease state, PNA exposure, in vitro mitogen stimulation, etc. have been summarized in this report. Some studies have demonstrated increased AHM activity in lymphocytes from cigarette smokers (compared to nonsmokers), and in lung cancer patients when compared to appropriate control groups. These observations are confused by extreme variability in human lymphocyte AHM activities, such variability arising from factors such as genetic variation in AHM activity, variation in in vitro culture conditions which affect AHM activity, and the problematical relationship of common AHM assays to actual PNA metabolism taking place in lymphocytes. If some of the foregoing problems can be adequately addressed, lymphocyte AHM activity could hold the promise of being a useful biomarker system for human PNA exposure.

  3. Fragmentation Mechanism of Trans-α-Aryl-β-enamino Esters

    Institute of Scientific and Technical Information of China (English)

    JIANG,Nan(蒋楠); WANG,Jian-Bo(王剑波); HE,Mei-Yu(何美玉)

    2002-01-01

    Electron impact-induced fragmentation mechanisms of trans-α-aryl-β-enamino esters were investigated using mass-analyzed ion kindetic energy (MIKE) spectrometry and high resolution accurate mass data. It was found that the main characteristic fragmentations of compounds studied were: an odd electron ion M+. - EtOH was formed by losing a neutral molecule of ethanol; and the skeletal rearrangements took place; and the ring opening reaction happened after losing a carbon monoxide;and the typical McLafferty rearrangement underwent in ester group. The cyclization reaction caused by losing neutral molecule of TsNH2 due to the ortho-effects of substituted group of aromatic ring was also observed.

  4. Aryl hydrocarbon receptor ligands in cancer: friend and foe.

    Science.gov (United States)

    Murray, Iain A; Patterson, Andrew D; Perdew, Gary H

    2014-12-01

    The aryl hydrocarbon receptor (AHR) is a ligand-activated transcription factor that is best known for mediating the toxicity and tumour-promoting properties of the carcinogen 2,3,7,8-tetrachlorodibenzo-p-dioxin, commonly referred to as ‘dioxin’. AHR influences the major stages of tumorigenesis — initiation, promotion, progression and metastasis — and physiologically relevant AHR ligands are often formed during disease states or during heightened innate and adaptive immune responses. Interestingly, ligand specificity and affinity vary between rodents and humans. Studies of aggressive tumours and tumour cell lines show increased levels of AHR and constitutive localization of this receptor in the nucleus. This suggests that the AHR is chronically activated in tumours, thus facilitating tumour progression. This Review discusses the role of AHR in tumorigenesis and the potential for therapeutic modulation of its activity in tumours. PMID:25568920

  5. A facile synthesis of terminal arylacetylenes via Sonogashira coupling reactions catalyzed by MCM-41-supported mercapto palladium(0) complex

    Institute of Scientific and Technical Information of China (English)

    Ya Ping Xu; Rong Hua Hu; Ramesh C.Kamboj

    2008-01-01

    A variety of terminal arylacetylenes have been conveniently synthesized in good to high yields via Sonogashira coupling of aryl iodides with (trimethylsilyl)acetylene catalyzed by MCM-41-supported mercapto palladium(0) complex,followed by desilylation under mild conditions.This polymeric palladium catalyst can be reused many times without any decrease in activity.

  6. 1-(Triethoxysilylbuta-1,3-dienes—New Building Blocks for Stereoselective Synthesis of Unsymmetrical (E,E-1,4-Disubstituted 1,3-dienes

    Directory of Open Access Journals (Sweden)

    Justyna Szudkowska-Frątczak

    2015-10-01

    Full Text Available A convenient methodology for the highly stereoselective synthesis of unsymmetrical (1E,3E-1,4-disubstituted 1,3-dienes based on palladium-catalyzed Hiyama cross-coupling reaction of 1-(triethoxysilyl-substituted buta-1,3-dienes with aryl iodides is reported.

  7. Combining vitamin A and vaccines: convenience or conflict?

    Science.gov (United States)

    Benn, Christine Stabell

    2012-01-01

    with important consequences for mortality. First, a smaller dose of vitamin A was more beneficial than a larger dose for girls. Second, the effect of vitamin A given with DTP vaccine was significantly different from the effect of vitamin A given with measles vaccine, and children, who received vitamin A with DTP vaccine, had higher mortality than children, who had received vitamin A alone, or who did not receive anything. Third, vitamin A given with BCG at birth interacted negatively with subsequent DTP vaccines in girls. Fourth, the effect of vitamin A to older children in Ghana depended on vaccination status, being beneficial in boys, but harmful in girls who received DTP vaccine during follow-up. The results also show that boys and girls respond differently to vitamin A and vaccines. It is a common assumption within public health in low-income countries that interventions can be combined without producing unexpected consequences. The work presented in this thesis confronts this assumption; the results show that vitamin A and vaccines should be seen not only as specific interventions with specific and independent effects, but as immuno-modulators, which can interact with important consequences for overall mortality. Combining interventions can be convenient and lead to synergistic health benefits, but we documented several examples, where it also leads to unexpectedly increased mortality. Thus, to optimise the child health intervention policy in low-income countries a shift in paradigm is needed. Health interventions should no longer be seen as merely specific and independent, and the policy should probably not be the same for boys and girls. Though more complex, it is necessary to evaluate all health interventions in terms of their effect on overall mortality - and their potential interactions with other health interventions and potential sex-differential effects should always be investigated. Only in this way can we assure that the children in the poorest countries

  8. Synthesis of 1-Benzoyl-3-aryl-4-hydroxy-4-phenylimidazolidin-2-thiones

    Institute of Scientific and Technical Information of China (English)

    曾润生; 邹建平; 穆学军; 沈琪

    2003-01-01

    l-Benzoyl-3-aryl-4-hydroxy-4-phenylimidazolidin-2-thiones can be synthesized readily from the cyclization of 1-benzoyl-3-arylthioureas with bromine-acetophenone in the presence of excess triethylamiqe.

  9. Microwave-accelerated Synthesis of Some (±)-1-Aryl-5-chloroisochromans

    Institute of Scientific and Technical Information of China (English)

    SAEED Aamer; MUMTAZ Amara

    2008-01-01

    Solventless one-pot synthesis of some new (±)-1-aryl-5-chloroisochromans by cyclocondensation of 2-(2-chlorophenyl)ethanol with aromatic aldehydes via an acid catalyzed oxa-Pictet-Spengler reaction under microwave irradiation is described.

  10. Synthesis and application of chiral N,N′-dialkylated cyclohexanediamine for asymmetric hydrogenation of aryl ketones

    Institute of Scientific and Technical Information of China (English)

    Meng Lin Ma; Chuan Hong Ren; Ya Jing Lv; Hua Chen; Xian Jun Li

    2011-01-01

    Chiral N,N′-dialkylated cyclohexanediamine derived ligands have been synthesized and used in the asymmetric hydrogenation of aryl ketones. Optically active alcohols with up to 90% enantiomeric excess were obtained in high yields.

  11. Recent Advancements and Biological Activities of Aryl Propionic Acid Derivatives: (A Review

    Directory of Open Access Journals (Sweden)

    Harshita Dhall

    2016-08-01

    Full Text Available The aryl propionic acid derivatives belong to an important class of NSAIDs (Non Steroidal Anti-inflammatory Drugs. Ibuprofen, chemically called 2-(4-isobutyl phenyl propionic acid, is a well known NSAID. Aryl propionic acid derivatives possesses a wide range of biological activities including anti-bacterial, anti-convulsant, anti-cancer, analgesic and anti-inflammatory activities. Apart from very potent compounds in the field of analgesics and antipyrectics as Ibuprofen, Oxaprozin, Ketoprofen, Fenoprofen; aryl propionic acid derivatives plays important role to treat other ailments also. Through this review, an attempt has been made to emphasize on recent work done and recent advancements in arena of aryl propionic acid derivatives in view of medicinal chemistry.

  12. Microwave activated synthesis of 2-aryl-quinazolin-4(3H)ones

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A highly efficient synthesis of 2-aryl-quinazolin-4(3H)ones was performed by one-pot oxidative heterocyclization of 2-aminobenzamide with aldehydes in the presence of potassium permanganate in dimethylacetamide under microwave irradiation.

  13. Retinoic acid induces sodium/iodide symporter gene expression and radioiodide uptake in the MCF-7 breast cancer cell line

    OpenAIRE

    Kogai, Takahiko; Schultz, James J.; Johnson, Laura S.; Huang, Min; Brent, Gregory A.

    2000-01-01

    The sodium/iodide symporter (NIS) stimulates iodide uptake in normal lactating breast, but is not known to be active in nonlactating breast or breast cancer. We studied NIS gene regulation and iodide uptake in MCF-7 cells, an estrogen receptor (ER)-positive human breast cancer cell line. All-trans retinoic acid (tRA) treatment stimulated iodide uptake in a time- and dose-dependent fashion up to ≈9.4-fold above baseline. Stimulation with selective retinoid compounds indicated that the inductio...

  14. Enantioselective CuH-Catalyzed Reductive Coupling of Aryl Alkenes and Activated Carboxylic Acids.

    Science.gov (United States)

    Bandar, Jeffrey S; Ascic, Erhad; Buchwald, Stephen L

    2016-05-11

    A new method for the enantioselective reductive coupling of aryl alkenes with activated carboxylic acid derivatives via copper hydride catalysis is described. Dual catalytic cycles are proposed, with a relatively fast enantioselective hydroacylation cycle followed by a slower diastereoselective ketone reduction cycle. Symmetrical aryl carboxyclic anhydrides provide access to enantioenriched α-substituted ketones or alcohols with excellent stereoselectivity and functional group tolerance. PMID:27121395

  15. Systematic Synthesis and Characterization of a Series of Tetra(5-aryl-2-thienyl)thiophenes

    OpenAIRE

    Muraoka, Hiroki; Tanifuji, Takanori; Ogawa, Satoshi

    2011-01-01

    We have succeeded in the synthesis of a series of tetra(5-aryl-2-thienyl)thiophenes as aryl-functionalized tetrathienylthiophenes. Characterization of these chemicals was performed by physical and spectroscopic means. The electrochemical properties were examined by cyclic voltammetry. The CV of all compounds showed that the redox behavior and potentials were controlled by the electronic effect of the p-substituted phenyl groups introduced at the outer α-positions on the four thiophene units l...

  16. An air-stable copper reagent for nucleophilic trifluoromethylthiolation of aryl halides

    KAUST Repository

    Weng, Zhiqiang

    2012-12-12

    A series of copper(I) trifluoromethyl thiolate complexes have been synthesized from the reaction of CuF2 with Me3SiCF 3 and S8 (see scheme; Cu red, F green, N blue, S yellow). These air-stable complexes serve as reagents for the efficient conversion of a wide range of aryl halides into the corresponding aryl trifluoromethyl thioethers in excellent yields. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Photoinduced C-C Cross-Coupling of Aryl Chlorides and Inert Arenes

    Directory of Open Access Journals (Sweden)

    Lele Wang

    2016-01-01

    Full Text Available Here we report a facile, efficient, and catalyst-free method to realize C-C cross-coupling of aryl chlorides and inert arenes under UV light irradiation. The aryl radical upon homolytic cleavage of C-Cl bond initiated the nucleophilic substitution reaction with inert arenes to give biaryl products. This mild reaction mode can also be applied to other synthetic reactions, such as the construction of C-N bonds and trifluoromethylated compounds.

  18. Modular Isoquinoline Synthesis Using Catalytic Enolate Arylation and in Situ Functionalization

    OpenAIRE

    Pilgrim, Ben S.; Gatland, Alice E; McTernan, Charlie T.; Procopiou, Panayiotis A; Donohoe, Timothy J

    2013-01-01

    A methyl ketone, an aryl bromide, an electrophile, and ammonium chloride were combined in a four-component, three-step, and one-pot coupling procedure to furnish substituted isoquinolines in overall yields of up to 80%. This protocol utilizes the palladium catalyzed α-arylation reaction of an enolate, followed by in situ trapping with an electrophile, and aromatization with ammonium chloride. tert-Butyl cyanoacetate participated in a similar protocol; after functionalization and decarboxylati...

  19. Perceived Convenience in an Extended Technology Acceptance Model: Mobile Technology and English Learning for College Students

    Science.gov (United States)

    Chang, Chi-Cheng; Yan, Chi-Fang; Tseng, Ju-Shih

    2012-01-01

    Since convenience is one of the features for mobile learning, does it affect attitude and intention of using mobile technology? The technology acceptance model (TAM), proposed by David (1989), was extended with perceived convenience in the present study. With regard to English language mobile learning, the variables in the extended TAM and its…

  20. Trapping radiodine, in the form of methyl iodide, on nuclear carbon

    Energy Technology Data Exchange (ETDEWEB)

    Nacapricha, D. [Mahidol Univ., Bangkok (Thailand); Taylor, C. [John Moores Univ., Liverpool (United Kingdom)

    1996-12-31

    Studies have been performed on potassium-iodide-impregnated charcoals of the type used in the nuclear industry for trapping radioiodine released during nuclear fission. The effects of various parameters on the trapping efficiency of methyl iodide have been investigated. A variation in particle size within a bulk charcoal caused poor precision in K value measurements because of differences in surface area, pore volume, and bed density, leading to differences in the deposition of the impregnant. Precision is improved by sieving the charcoal to a narrower size because smaller particles have a higher porosity. This finding is supported by surface area and pore measurements. Two methods of impregnation are compared by measuring K values and the deposition of potassium iodide. Charcoal impregnated by rotary evaporation exhibits both higher K values and higher potassium iodide contents than sprayed charcoal. Two designs of spraying drum are compared: a drum with helical vanes allows more efficient deposition and more uniform distribution of impregnant than a drum with axial vanes. A decrease in the K value with increasing humidity correlates with the available surface area. A similar correlation exists between water content and available pore volume. Aging of potassium-iodide-impregnated charcoal, caused by the formation of oxygen complexes on the surface, is associated with significant falls in K value. K values of charcoals also can be restored to at least their original values by heat treatment in the absence of air. 12 refs., 6 figs., 1 tab.

  1. Processes of adsorption/desorption of iodides and cadmium cations onto/from Ag(111

    Directory of Open Access Journals (Sweden)

    VLADIMIR D. JOVIĆ

    2011-02-01

    Full Text Available In this work, the adsorption/desorption processes of iodides and cadmium cations in the presence of iodides onto/from Ag(111 were investigated. It was shown that both processes were complex, characterized by several peaks on the cyclic voltammograms (CVs. By PeakFit analysis of the recorded CVs and subsequent fitting of the obtained peaks by the Frumkin adsorption isotherm, the interaction parameter (f and the Gibbs energy of adsorption (DGads for each adsorbed phase were determined. In the case of iodide adsorption, four peaks were characterized by negative values of f, indicating attractive lateral interaction between the adsorbed anions, while two of them possessed value of f < –4, indicating phase transition processes. The adsorption/desorption processes of cadmium cations (underpotential deposition – UPD of cadmium in the presence of iodide anions was characterized by two main peaks, each of them being composed of two or three peaks with negative values of f. By the analysis of charge vs. potential dependences obtained either from the CVs or current transients on potentiostatic pulses, it was concluded that adsorbed iodides did not undergo desorption during the process of Cd UPD, but became replaced by Cd ad-atoms and remained adsorbed on top of a Cd layer and/or in between Cd the ad-atoms.

  2. [Determination of iodide, thiocyanate and perchlorate ions in environmental water by two-dimensional ion chromatography].

    Science.gov (United States)

    Lin, Li; Wang, Haibo; Shi, Yali

    2013-03-01

    A procedure for the determination of iodide, thiocyanate and perchlorate ions in environmental water by two-dimensional ion chromatography has been developed. At first the iodide, thiocyanate and perchlorate ions were separated from interfering ions by a column (IonPac AS16, 250 mm x 4 mm). The iodide ion, thiocyanate and perchlorate ions were then enriched with an enrichment column (MAC-200, 80 mm x 0.75 mm). In the 2nd-dimensional chromatography, iodide thiocyanate and perchlorate ions were separated and quantified by a capillary column (IonPac AS20 Capillary, 250 mm x 0.4 mm). The linear ranges were 0.05 -100 pg/L with correlation coefficients of 0. 999 9, and the detection limits were 0. 02 - 0.05 micro gg/L. The spiked recoveries of iodide, thiocyanate and perchlorate ions were in the range of 85.1% to 100.1%. The relative standard deviations of the recoveries were 1.7% to 4.9%.

  3. Proton and iodine-127 nuclear magnetic resonance studies on the binding of iodide by lactoperoxidase

    Energy Technology Data Exchange (ETDEWEB)

    Sakurada, J.; Takahashi, S.; Shimizu, T.; Hatano, M.; Nakamura, S.; Hosoya, T.

    1987-10-06

    Interaction of an iodide ion with lactoperoxidase was studied by the use of /sup 1/H NMR, /sup 127/I NMR, and optical difference spectrum techniques. /sup 1/H NMR spectra demonstrated that a major broad hyperfine-shifted signal at about 60 ppm, which is ascribed to the heme peripheral methyl protons, was shifted toward high field by adding KI, indicating the binding of iodide to the active site of the enzyme; the dissociation constant was estimated to be 38 mM at pH 6.1. The binding was further detected by /sup 127/I NMR, showing no competition with cyanide. Both /sup 1/H NMR and /sup 127/I NMR revealed that the binding of iodide to the enzyme is facilitated by the protonation of an ionizable group with a pK/sup a/ value of 6.0-6.8, which is presumably the distal histidyl residue. Optical difference spectra showed that the binding of an aromatic donor molecule to the enzyme is slightly but distinctly affected by adding KI. On the basis of these results, it was suggested that an iodide ion binds to lactoperoxidase outside the heme crevice but at the position close enough to interact with the distal histidyl residue which possibly mediates electron transport in the iodide oxidation reaction.

  4. Alpha-lipoic acid induces sodium iodide symporter expression in TPC-1 thyroid cancer cell line

    International Nuclear Information System (INIS)

    Introduction: Patients with metastatic thyroid cancers that do not uptake iodine need effective therapeutic option. Differentiation-inducing agents have been tried to restore functional expression of sodium iodide symporter (NIS) without success. Our objective was to assess the effect of alpha-lipoic acid (ALA), known as potential antioxidant, on expression of sodium iodide symporter in thyroid cancer cells. Methods: Human thyroid cancer-derived cell lines, TPC-1, were treated with ALA, and changes in NIS mRNA and protein expression were measured. ALA's effect on NIS gene promoter was evaluated, and functional NIS expression was assessed by iodide uptake assay. Results: Treatment with ALA increased NIS mRNA expression up to ten folds of control dose-dependently after 24 h of exposure. ALA increased NIS promoter activity, and increased iodide uptake by 1.6 fold. ALA induced expression of NIS protein, but had no significant effect on the plasma membrane trafficking. ALA increased phosphorylation of CREB and nuclear translocation of pCREB, and co-treatment of ALA and trichostatin A increased iodide uptake by three folds in TPC-1 cells. Conclusions: ALA is a potential agent to increase NIS transcription in TPC-1. It could be used as an adjunctive agent to increase efficacy of radioiodine therapy if combined with a strategy to increase NIS protein trafficking to cell membrane.

  5. Future Estimation of Convenience Living Facilities Withdrawal due to Population Decline all Over Japan from 2010 TO 2040 - Focus on Supermarkets, Convenience Stores and Drugstores

    Science.gov (United States)

    Nishimoto, Yuka; Akiyama, Yuki; Shibasaki, Ryosuke

    2016-06-01

    Population explosion is considered to be one of the most crucial problems in the world. However, in Japan, the opposite problem: population decline has become serious now. Japanese population is estimated to decrease by twenty millions in 2040. This negative situation will cause to increase areas where many residents cannot make a daily living all over Japan because many convenience living facilities such as supermarkets, convenience stores and drugstores will be difficult to maintain their market area population due to future population decline. In our research, we used point data of convenience living facilities developed by address geocoding of digital telephone directory and point data of future population projection developed by distribution of Japanese official population projection data proportionally among the building volume of digital residential map, which can monitor building volumes all over Japan. In conclusion, we estimated that various convenience living facilities in Japan will shrink and close by population decline in near future. In particular, it is cleared that approximately 14.7% of supermarkets will be possible to withdraw all over Japan by 2040. In addition, it is cleared that over 40% of supermarkets in some countryside prefectures will be possible to withdraw by 2040. Thus, we estimated future distributions of convenience living facilities that cannot maintain their market area population due to future population decline. Moreover, we estimated the number of people that they will become inconvenience in buying fresh foods.

  6. The effect of service convenience on word - of - mouth and repurchase intention

    Directory of Open Access Journals (Sweden)

    zohre dehdashti shahrokh

    2015-09-01

    Full Text Available The service convenience represents the core values of customer time and energy expended during and after receiving services. The high level of convenience, facilitate customer purchase decision process and helps him by saving the time and effort to better understand the services provided tangible evidence. This paper examines the impact of the service convenience of word of mouth and repurchases intention to MTN's customers. To collect data of 196 patients were randomly selected. The results of data analysis using structural equation modeling, the relationship between the service convenience with satisfaction, repurchase intention was approved by word of mouth. Perceived service value adjusts the relation between service convenience and customer satisfaction, the impact of trust on word of mouth was not approved.

  7. ULTRASOUND ASSISTED EFFICIENT AND GREENER ONE POT SYNTHESIS OF ARYL-14-H-DIBENZO [a,j]XANTHENE DERIVATIVES Ultraschall unterstützt effizientere und umweltfreundlichere ONE Eintopfsynthese ARYL-14-H-dibenzo [a, j] Xanthenderivate

    Directory of Open Access Journals (Sweden)

    Saurabh Puri, Balbir Kaur, Anupama Parmar and Harish Kumar

    2011-07-01

    Full Text Available Aryl-14-H-dibenzo[a,j]xanthenes have been synthesized in high yields from the condensation of aryl aldehydes and 2-napthol in presence of copper perchlorate hexahydrate as catalyst at room temperature gives aryl-14-H-dibenzo[a,j]xanthenes with excellent yields under ultrasound irradiation (35 kHz. This method has the advantages of high yield, simple methodology, greener and one pot procedure.

  8. X-ray imaging performance of structured cesium iodide scintillators.

    Science.gov (United States)

    Zhao, Wei; Ristic, Goran; Rowlands, J A

    2004-09-01

    Columnar structured cesium iodide (CsI) scintillators doped with Thallium (Tl) have been used extensively for indirect x-ray imaging detectors. The purpose of this paper is to develop a methodology for systematic investigation of the inherent imaging performance of CsI as a function of thickness and design type. The results will facilitate the optimization of CsI layer design for different x-ray imaging applications, and allow validation of physical models developed for the light channeling process in columnar CsI layers. CsI samples of different types and thicknesses were obtained from the same manufacturer. They were optimized either for light output (HL) or image resolution (HR), and the thickness ranged between 150 and 600 microns. During experimental measurements, the CsI samples were placed in direct contact with a high resolution CMOS optical sensor with a pixel pitch of 48 microns. The modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) of the detector with different CsI configurations were measured experimentally. The aperture function of the CMOS sensor was determined separately in order to estimate the MTF of CsI alone. We also measured the pulse height distribution of the light output from both the HL and HR CsI at different x-ray energies, from which the x-ray quantum efficiency, Swank factor and x-ray conversion gain were determined. Our results showed that the MTF at 5 cycles/mm for the HR type was 50% higher than for the HL. However, the HR layer produces approximately 36% less light output. The Swank factor below K-edge was 0.91 and 0.93 for the HR and HL types, respectively, thus their DQE(0) were essentially identical. The presampling MTF decreased as a function of thickness L. The universal MTF, i.e., MTF plotted as a function of the product of spatial frequency f and CsI thickness L, increased as a function of L. This indicates that the light channeling process in CsI improved the MTF of

  9. Synthesis and NMR Studies of (E)-1-Aryl-3-(2-pyrrolyl)-2-propenones and (E)-3-Aryl-1-(2-pyrrolyl)-2-propenones

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Insook; Jeoung, Eun Ji; Lee, Chang Kiu [Kangwon National Univ., Chuncheon (Korea, Republic of)

    2013-03-15

    Series of (E)-1-aryl-3-(2-pyrrolyl)-2-propenones, that were aldol condensation products between pyrrole-2-carbaldehyde and m- and p-substituted acetophenones, were prepared and their {sup 1}H and {sup 13}C NMR spectra were examined to obtain the information on the conformation of the enone system. Similar studies were carried out with (E)-3-aryl-1-(2-pyrrolyl)-2-propenones that were prepared from 2-acetylpyrrole and m- and p-substituted benzaldehydes. The substituent chemical shifts were studied by applying the Hammett relationship.

  10. Short Synthesis of Sulfur Analogues of Polyaromatic Hydrocarbons through Three Palladium-Catalyzed C-H Bond Arylations.

    Science.gov (United States)

    Hagui, Wided; Besbes, Néji; Srasra, Ezzeddine; Roisnel, Thierry; Soulé, Jean-François; Doucet, Henri

    2016-09-01

    An expeditious synthesis of a wide range of phenanthro[9,10-b]thiophene derivatives, which are a class of polyaromatic hydrocarbon (PAH) containing a sulfur atom, is reported. The synthetic scheme involves only two operations from commercially available thiophenes, 2-bromobenzenesulfonyl chlorides and aryl bromides. In the first step, palladium-catalyzed desulfitative arylation using 2-bromobenzenesulfonyl chlorides allows the synthesis of thiophene derivatives, which are substituted at the C4 position by an aryl group containing an ortho-bromo substituent. Then, a palladium-catalyzed one-pot cascade intermolecular C5-arylation of thiophene using aryl bromides followed by intramolecular arylation led to the corresponding phenanthro[9,10-b]thiophenes in a single operation. In addition, PAHs containing two or three sulfur atoms, as well as both sulfur and nitrogen atoms, were also designed by this strategy. PMID:27550151

  11. Structural and biochemical impact of C8-aryl-guanine adducts within the NarI recognition DNA sequence: influence of aryl ring size on targeted and semi-targeted mutagenicity

    OpenAIRE

    Sproviero, Michael; Verwey, Anne M.R.; Rankin, Katherine M.; Witham, Aaron A.; Soldatov, Dmitriy V.; Richard A. Manderville; Fekry, Mostafa I.; Sturla, Shana J.; Sharma, Purshotam; Wetmore, Stacey D.

    2014-01-01

    Chemical mutagens with an aromatic ring system may be enzymatically transformed to afford aryl radical species that preferentially react at the C8-site of 2′-deoxyguanosine (dG). The resulting carbon-linked C8-aryl-dG adduct possesses altered biophysical and genetic coding properties compared to the precursor nucleoside. Described herein are structural and in vitro mutagenicity studies of a series of fluorescent C8-aryl-dG analogues that differ in aryl ring size and are representative of auth...

  12. Fluorogenic derivatization of aryl halides based on the formation of biphenyl by Suzuki coupling reaction with phenylboronic acid.

    OpenAIRE

    Kishikawa, Naoya; Kubo, Kimiko; Hammad, Sherin Farouk; Mabrouk, Mokhtar Mohamed; Habib, Ahmed; Elfatatry, Hamed; Ohyama, Kaname; Nakashima, Kenichiro; Kuroda, Naotaka

    2009-01-01

    The fluorogenic derivatization method for aryl halide was developed for the first time. This method was based on the formation of fluorescent biphenyl structure by Suzuki coupling reaction between aryl halides and non-fluorescent phenylboronic acid (PBA). We measured the fluorescence spectra of the products obtained by the reaction of p-substituted aryl bromides (i.e., 4-bromobenzonitrile, 4-bromoanisole, 4-bromobenzoic acid ethyl ester and 4-bromotoluene) with PBA in the presence of palladiu...

  13. Merging Photoredox and Nickel Catalysis: The Direct Synthesis of Ketones by the Decarboxylative Arylation of α-Oxo Acids.

    Science.gov (United States)

    Chu, Lingling; Lipshultz, Jeffrey M; MacMillan, David W C

    2015-06-26

    The direct decarboxylative arylation of α-oxo acids has been achieved by synergistic visible-light-mediated photoredox and nickel catalysis. This method offers rapid entry to aryl and alkyl ketone architectures from simple α-oxo acid precursors via an acyl radical intermediate. Significant substrate scope is observed with respect to both the oxo acid and arene coupling partners. This mild decarboxylative arylation can also be utilized to efficiently access medicinal agents, as demonstrated by the rapid synthesis of fenofibrate.

  14. Boryl (Hetero)aryne Precursors as Versatile Arylation Reagents: Synthesis through C–H Activation and Orthogonal Reactivity

    Science.gov (United States)

    Demory, Emilien; Devaraj, Karthik; Orthaber, Andreas; Gates, Paul J; Pilarski, Lukasz T

    2015-01-01

    (Pinacolato)boryl ortho-silyl(hetero)aryl triflates are presented as a new class of building blocks for arylation. They demonstrate unique versatility by delivering boronate or (hetero)aryne reactivity chemoselectively in a broad range of transformations. This approach enables the unprecedented postfunctionalization of fluoride-activated (hetero)aryne precursors, for example, as substrates in transition-metal catalysis, and offers valuable new possibilities for aryl boronate postfunctionalization without the use of specialized protecting groups. PMID:26270451

  15. Doping in mercuric iodide crystals and its influence on electronic properties and material structure

    International Nuclear Information System (INIS)

    Doping of mercuric iodide single crystals with SbI3 was studied. Three major aspects of the influence of doping were investigated: the α to β solid phase transition, the crystal structure and the semiconducting properties. A controlled doping method and a new growth technique from the melt were developed. A quantitative correlation between the antimony concentration and the charge carrier transport properties as well as the nuclear detector characteristics of HgI2 were established for the first time. In the present work the influence of various impurities (Sb, Cu, Ag, Bi) on the solid state phase transformation of mercuric iodide has been investigated. In the second part of the work a new growth method for mercuric iodide single crystals containing a controlled amount of SbI3, has been developed. In the last part of this work the influence of the presence of impurities in the crystal on the charge carrier transport properties has been investigated. (author)

  16. Quantification of propidium iodide delivery with millisecond electric pulses: A model study

    CERN Document Server

    Yu, Miao

    2014-01-01

    A model study of propidium iodide delivery with millisecond electric pulses is presented; this work is a companion of the experimental efforts by Sadik et al. [1]. Both membrane permeabilization and delivery are examined with respect to six extra-cellular conductivities. The transmembrane potential of the permeabilized regions exhibits a consistent value, which corresponds to a bifurcation point in the pore-radius-potential relation. Both the pore area density and membrane conductance increase with an increasing extra-cellular conductivity. On the other hand, the inverse correlation between propidium iodide delivery and extra-cellular conductivity as observed in the experiments is quantitatively captured by the model. This agreement confirms that this behavior is primarily mediated by electrophoretic transport during the pulse. The results suggest that electrophoresis is important even for the delivery of small molecules such as propidium iodide. The direct comparison between model prediction and experimental...

  17. Iodide retention by cinnabar (HgS) and chalcocite (Cu{sub 2}S)

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, H.L.; Balsley, S.D.; Brady, P.V.

    1995-07-01

    Sorption of iodide (I{sup {minus}}) on cinnabar (HgS) and chalcocite (Cu{sub 2}S) was examined as a function of pH at 25{degrees}C in a series of batch experiments. Calculated distribution ratios (K{sub d}) far exceed those reported for other minerals; maximal K{sub d}`s of 1375 cc/g (Cu{sub 2}S) and 3080 c/g (HgS) were observed between pH 4-5, but wre substantial at all pH`s measured (4 < pH < 10). Iodide sorption apparently occurs by the formation of an insoluble surface solid solution with exposed Hg and Cu sites. Surface solid solution formation is favored at low pH due to the lessened electrostatic repulsion of the iodide ion by the sulfide surfaces.

  18. All-Solid-State Iodide Selective Electrode for Iodimetry of Iodized Salts and Vitamin C

    Directory of Open Access Journals (Sweden)

    TIRUWORK MEQUANINT

    2012-12-01

    Full Text Available A laboratory-made all-solid state iodide selective electrode, with Ag2S-AgI coated on a graphite rod recovered from dry cell battery, was prepared according to previous procedures. The electrode’s linear response to iodide was in the concentration range of 10-6 M to 10-1 M with a slope of 56.85 mV/decade and a detection limit of 6×10-7M. Iodate recovery test for laboratory formulated iodate-iodized salt was found to be 98.6 % with a standard deviation of 1.14%. The titratability of the iodized salt solution was at least 10-200 ppm potassium iodate (6-120 ppm iodine, exhibiting distinct endpoints in the range wider than the ones set in regulatory standards and reflecting that QC monitoring in production and stability decline of iodine content upon storage can be performed with the electrode method. On the basis this potentiometric titration, the application of the laboratory-made iodide electrode (vs. a saturated calomel reference electrode was extended to the determination of iodine in commercial iodized salts. In all the iodine assays, the iodate-iodized salt was initially treated with acid and an excess of iodide before titration against Na2S2O3 solution. The iodine content in table salts iodized with iodide was determined by direct potentiometry. The electrode was further used for vitamin C (ascorbic acid determinations in pharmaceutical tablets and orange juice by back titrating excess I3- against standard Na2S2O3 in acidic media. The overall outcome is that the iodide ISE can be used as sharp endpoint indicator for these titrimetric reactions in place of the well known official, but visually monitored, starch- triodide end-point reaction detection.

  19. Iron-Catalyzed, Highly Regioselective Synthesis of alpha-Aryl Carboxylic Acids from Styrene Derivatives and CO2

    OpenAIRE

    Greenhalgh, Mark D.; Thomas, Stephen P.

    2012-01-01

    The iron-catalyzed hydrocarboxylation of aryl alkenes has been developed using a highly active bench-stable iron(II) precatalyst to give alpha-aryl carboxylic acids in excellent yields and with near-perfect regioselectivity. Using just 1 mol % FeCl2, bis(imino)pyridine 6 (1 mol %), CO2 (atmospheric pressure), and a hydride source (EtMgBr, 1.2 equiv), a range of sterically and electronically differentiated aryl alkenes were transformed to the corresponding alpha-aryl carboxylic acids (up to 96...

  20. New air-stable planar chiral ferrocenyl monophosphine ligands: Suzuki cross-coupling of aryl chlorides and bromides

    DEFF Research Database (Denmark)

    Jensen, Jakob Feldthusen; Johannsen, Mogens

    2003-01-01

    GraphicA novel class of planar chiral electron-rich monophosphine ligands has been developed. The modular design allows a short and efficient synthesis of an array of aryl-ferrocenyl derivatives carrying the donating bis(dicyclohexyl)phosphino moiety. These new ligands have successfully been appl...... applied in the palladium-catalyzed Suzuki cross-coupling of activated as well as nonactivated aryl chlorides at room temperature. The asymmetric coupling of an aryl bromide and an aryl boronic acid was also tested, giving ees up to 54%....

  1. Disparities of Food Availability and Affordability within Convenience Stores in Bexar County, Texas

    Directory of Open Access Journals (Sweden)

    Matthew Lee Smith

    2013-01-01

    Full Text Available The American Diabetes Association (ADA recommends healthful food choices; however, some geographic areas are limited in the types of foods they offer. Little is known about the role of convenience stores as viable channels to provide healthier foods in our “grab and go” society. The purposes of this study were to (1 identify foods offered within convenience stores located in two Bexar County, Texas, ZIP Codes and (2 compare the availability and cost of ADA-recommended foods including beverages, produce, grains, and oils/fats. Data were analyzed from 28 convenience store audits performed in two sociodemographically diverse ZIP Codes in Bexar County, Texas. Chi-squared tests were used to compare food availability, and t-tests were used to compare food cost in convenience stores between ZIP Codes. A significantly larger proportion of convenience stores in more affluent areas offered bananas (χ2=4.17, P=0.003, whole grain bread (χ2=8.33, P=0.004, and baked potato chips (χ2=13.68, P<0.001. On average, the price of diet cola (t=−2.12, P=0.044 and certain produce items (e.g., bananas, oranges, tomatoes, broccoli, and cucumber was significantly higher within convenience stores in more affluent areas. Convenience stores can play an important role to positively shape a community’s food environment by stocking healthier foods at affordable prices.

  2. Modeling of Turing Structures in the Chlorite-Iodide-Malonic Acid-Starch Reaction System

    Science.gov (United States)

    Lengyel, Istivan; Epstein, Irving R.

    1991-02-01

    Recent experiments on the chlorite-iodide-malonic acid-starch reaction in a gel reactor give the first evidence of the existence of the symmetry breaking, reaction-diffusion structures predicted by Turing in 1952. A five-variable model that describes the temporal behavior of the system is reduced to a two-variable model, and its spatial behavior is analyzed. Structures have been found with wavelengths that are in good agreement with those observed experimentally. The gel plays a key role by binding key iodine species, thereby creating the necessary difference in the effective diffusion coefficients of the activator and inhibitor species, iodide and chlorite ions, respectively.

  3. Iodide uptake in human anaplastic thyroid carcinoma cells after transfer of the human thyroid peroxidase gene

    Energy Technology Data Exchange (ETDEWEB)

    Haberkom, U. [Clinical Cooperation Unit Nuclear Medicine, German Cancer Research Center, Heidelberg (Germany); Dept. of Nuclear Medicine, Univ. of Heidelberg (Germany); Altmann, A.; Jiang, S.; Morr, I.; Mahmut, M. [Clinical Cooperation Unit Nuclear Medicine, German Cancer Research Center, Heidelberg (Germany); Eisenhut, M. [Dept. of Nuclear Medicine, Univ. of Heidelberg (Germany)

    2001-05-01

    Human thyroperoxidase (hTPO) is critical for the accumulation of iodide in thyroid tissues. Poorly differentiated and anaplastic thyroid tumours which lack thyroid-specific gene expression fail to accumulate iodide and, therefore, do not respond to iodine-131 therapy. We consequently investigated whether transfer of the hTPO gene is sufficient to restore the iodide-trapping capacity in undifferentiated thyroid and non-thyroid tumour cells. The human anaplastic thyroid carcinoma cell lines C643 and SW1736, the rat Morris hepatoma cell line MH3924A and the rat papillary thyroid carcinoma cell line L2 were used as in vitro model systems. Employing a bicistronic retroviral vector based on the myeloproliferative sarcoma virus for the transfer of the hTPO and the neomycin resistance gene, the C643 cells and SW1736 cells were transfected while the L2 cells and MH3924A cells were infected with retroviral particles. Seven recombinant C643 and seven SW1736 cell lines as well as four recombinant L2 and four MH3924A cell lines were established by neomycin selection. They were studied for hTPO expression using an antibody-based luminescence kit, followed by determination of the enzyme activity in the guaiacol assay and of the iodide uptake capacity in the presence of Na{sup 125}I. Genetically modified cell lines expressed up to 1,800 times more hTPO as compared to wild type tumour cells. The level of hTPO expression varied significantly between individual neomycin-resistant cell lines, suggesting that the recombinant retroviral DNA was integrated at different sites of the cellular genome. The accumulation of iodide, however, was not significantly enhanced in individual recombinant cell lines, irrespective of low or high hTPO expression. Moreover, there was no correlation between hTPO expression and enzyme activity in individual cell lines. The transduction of the hTPO gene per se is not sufficient to restore iodide trapping in non-iodide-concentrating tumour cells. Future

  4. A Selective Iodide Ion Sensor Electrode Based on Functionalized ZnO Nanotubes

    OpenAIRE

    Magnus Willander; Zafar Hussain Ibupoto; Kimleang Khun

    2013-01-01

    In this research work, ZnO nanotubes were fabricated on a gold coated glass substrate through chemical etching by the aqueous chemical growth method. For the first time a nanostructure-based iodide ion selective electrode was developed. The ZnO nanotubes were functionalized with miconazole ion exchanger and the electromotive force (EMF) was measured by the potentiometric method. The iodide ion sensor exhibited a linear response over a wide range of concentrations (1 × 10−6 to 1 × 10−1 M) and ...

  5. Tris(1,2-dimethoxyethane-κ2O,O′iodidocalcium iodide

    Directory of Open Access Journals (Sweden)

    Siou-Wei Ou

    2012-02-01

    Full Text Available In the title complex, [CaI(C4H10O23]I, the CaII atom is seven-coordinated by six O atoms from three 1,2-dimethoxyethane (DME ligands and one iodide anion in a distorted pentagonal–bipyramidal geometry. The I atom and one of the O atoms from a DME ligand lie in the axial positions while the other O atoms lie in the basal plane. The other iodide anion is outside the complex cation.

  6. Efficiency enhancement in dye sensitized solar cells using gel polymer electrolytes based on a tetrahexylammonium iodide and MgI2 binary iodide system.

    Science.gov (United States)

    Bandara, T M W J; Dissanayake, M A K L; Jayasundara, W J M J S R; Albinsson, I; Mellander, B-E

    2012-06-28

    Quasi-solid-state dye-sensitized solar cells have drawn the attention of scientists and technologists as a potential candidate to supplement future energy needs. The conduction of iodide ions in quasi-solid-state polymer electrolytes and the performance of dye sensitized solar cells containing such electrolytes can be enhanced by incorporating iodides having appropriate cations. Gel-type electrolytes, based on PAN host polymers and mixture of salts tetrahexylammonium iodide (Hex4N(+)I(-)) and MgI2, were prepared by incorporating ethylene carbonate and propylene carbonate as plasticizers. The salt composition in the binary mixture was varied in order to optimize the performance of solar cells. The electrolyte containing 120% Hex4N(+)I(-) with respect to weight of PAN and without MgI2 showed the highest conductivity out of the compositions studied, 2.5 × 10(-3) S cm(-1) at 25 °C, and a glass transition at -102.4 °C. However, the electrolyte containing 100% Hex4N(+)I(-) and 20% MgI2 showed the best solar cell performance highlighting the influence of the cation on the performance of the cell. The predominantly ionic behaviour of the electrolytes was established from the dc polarization data and all the electrolytes exhibit iodide ion transport. Seven different solar cells were fabricated employing different electrolyte compositions. The best cell using the electrolyte with 100% Hex4N(+)I(-) and 20% MgI2 with respect to PAN weight showed 3.5% energy conversion efficiency and 8.6 mA cm(-2) short circuit current density.

  7. Studying Equilibrium in the Chemical Reaction between Ferric and Iodide Ions in Solution Using a Simple and Inexpensive Approach

    Science.gov (United States)

    Nikolaychuk, Pavel Anatolyevich; Kuvaeva, Alyona Olegovna

    2016-01-01

    A laboratory experiment on the study of the chemical equilibrium based on the reaction between ferric and iodide ions in solution with the formation of ferrous ions, free iodine, and triiodide ions is developed. The total concentration of iodide and triiodide ions in the reaction mixture during the reaction is determined by the argentometric…

  8. Analysis of iodide and iodate in Lake Mead, Nevada using a headspace derivatization gas chromatography-mass spectrometry.

    Science.gov (United States)

    Dorman, James W; Steinberg, Spencer M

    2010-02-01

    We report here a derivatization headspace method for the analysis of inorganic iodine in water. Samples from Lake Mead, the Las Vegas Wash, and from Las Vegas tap water were examined. Lake Mead and the Las Vegas Wash contained a mixture of both iodide and iodate. The average concentration of total inorganic iodine (TII) for Lake Mead was approximately 90 nM with an iodide-to-iodate ratio of approximately 1. The TII concentration (approximately 160 nM) and the ratio of iodide to iodate were higher for the Las Vegas Wash (approximately 2). The TII concentration for tap water was close to that of Lake Mead (approximately 90 nM); however, tap water contained no detectable iodide as a result of ozonation and chlorine treatment which converts all of the iodide to iodate. PMID:19184627

  9. Evodiamine as a novel antagonist of aryl hydrocarbon receptor

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hui [State Key Laboratory of Trauma, Burns, and Combined Injury, Department 1, Research Institute of Surgery, Daping Hospital, The Third Military Medical University, Chongqing 400042 (China); Department of Laboratory Medicine, The Affiliated Tenth People' s Hospital, Tongji University, Shanghai 200072 (China); Tu, Yongjiu; Zhang, Chun; Fan, Xia; Wang, Xi [State Key Laboratory of Trauma, Burns, and Combined Injury, Department 1, Research Institute of Surgery, Daping Hospital, The Third Military Medical University, Chongqing 400042 (China); Wang, Zhanli [College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014 (China); Liang, Huaping, E-mail: huaping_liang@yahoo.com.cn [State Key Laboratory of Trauma, Burns, and Combined Injury, Department 1, Research Institute of Surgery, Daping Hospital, The Third Military Medical University, Chongqing 400042 (China)

    2010-11-05

    Research highlights: {yields} Evodiamine interacted with the AhR. {yields} Evodiamine inhibited the specific binding of [{sup 3}H]-TCDD to the AhR. {yields} Evodiamine acts as an antagonist of the AhR. -- Abstract: Evodiamine, the major bioactive alkaloid isolated from Wu-Chu-Yu, has been shown to interact with a wide variety of proteins and modify their expression and activities. In this study, we investigated the interaction between evodiamine and the aryl hydrocarbon receptor (AhR). Molecular modeling results revealed that evodiamine directly interacted with the AhR. Cytosolic receptor binding assay also provided the evidence that evodiamine could interact with the AhR with the K{sub i} value of 28.4 {+-} 4.9 nM. In addition, we observed that evodiamine suppressed the 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) induced nuclear translocation of the AhR and the expression of CYP1A1 dose-dependently. These results suggested that evodiamine was able to bind to the AhR as ligand and exhibit antagonistic effects.

  10. Aryl Hydrocarbon Receptor-Dependent Pathways in Immune Regulation.

    Science.gov (United States)

    Gargaro, M; Pirro, M; Romani, R; Zelante, T; Fallarino, F

    2016-08-01

    The idea of possible involvement of the aryl hydrocarbon receptor (AhR) in transplant tolerance can be traced back >30 years, when very low doses of dioxin-the most potent AhR ligand-were found to markedly reduce the generation of cytotoxic T lymphocytes in response to alloantigen challenge in vivo. AhR is a ligand-activated transcription factor that is activated by dioxins and other environmental pollutants. We now know that AhR can bind a broad variety of activating ligands that are disparate in nature, including endogenous molecules and those formed in the gut from food and bacterial products. Consequently, in addition to its classical role as a toxicological signal mediator, AhR is emerging as a transcription factor involved in the regulation of both innate and adaptive immune responses in various immune cell types, including lymphocytes and antigen-presenting cells (APCs). Allograft rejection is mostly a T cell-mediated alloimmune response initiated by the recognition of alloantigens presented by donor and recipient APCs to recipient CD4(+) and CD8(+) T cells. Based on those findings, AhR may function as a critical sensor of outside and inside environments, leading to changes in the immune system that may have relevance in transplantation. PMID:26751261

  11. The ideology of convenience. Canned foods in women's magazines (Flanders, 1945-1960).

    Science.gov (United States)

    Geyzen, Anneke

    2015-11-01

    This paper investigates the communication of canned foods in Flanders between 1945 and 1960. It forwards the antinomy between convenience and care as theoretical framework, it uses three women's magazines as source material, and it subjects this material to the technique of close reading. The results show that the discursive construction of canned foods differs according to the ideology of the magazines. Whereas the agrarian periodical discarded canned foods as careless convenience that menaced the idea of the good housewife, the socialist and the commercial publications undeniably accepted them as caring convenience that could facilitate the household chores of working women. The analysis, thus, deals with the ideological aspect of convenience food, an aspect that has only rarely been examined.

  12. Synthesis and herbicidal activities of pyridyl sulfonylureas:More convenient preparation process of phenyl pyrimidylcarbamates

    Institute of Scientific and Technical Information of China (English)

    Ning Ma; Zhi Jin Fan; Bao Lei Wang; Yong Hong Li; Zheng Ming Li

    2008-01-01

    Four 4-monosubstituted pyrimidine pyridyl sulfonylureas were synthesized from pyridinesulfonamide and phenyl pyrimidyl-carbamate and screened for herbicidal activities.We also reported a convenient preparation process of phenyl pyrimidylcarbamates from pyrimidineamine and phenyl chloroformate.

  13. Microwave-assisted convenient synthesis of N-arylpyrrolidines in water

    Institute of Scientific and Technical Information of China (English)

    Hong Bo Li; Wu Liang; Lang Liu; Kai Chen; Yi Wu

    2011-01-01

    An efficient and clean synthesis of N-arylpyrrolidines from arylamines and 1,4-dimesyloxybutane was developed using microwave irradiation in an aqueous potassium carbonate medium without any catalyst. The procedure is rapid, simple and convenient.

  14. Influence of convenience on healthy food choice: The case of seafood

    OpenAIRE

    Mueller Loose, Simone; Peschel, Anne; Grebitus, Carola

    2012-01-01

    Although seafood is considered to be a healthy food choice, the recommended consumption level of two servings per week is still not reached in most countries. Previous research has identified potential barriers of seafood consumption, including purchase and consumption convenience, but it is still unclear to what degree consumer choice is affected by convenience relative to known choice drivers such as price, species and region of origin. This study contributes to filling this research gap by...

  15. High-Speed Train Stop-Schedule Optimization Based on Passenger Travel Convenience

    OpenAIRE

    Dingjun Chen; Shaoquan Ni; Chang’an Xu; Hongxia Lv; Simin Wang

    2016-01-01

    The stop-schedules for passenger trains are important to the operation planning of high-speed trains, and they decide the quality of passenger service and the transportation efficiency. This paper analyzes the specific manifestation of passenger travel convenience and proposes the concepts of interstation accessibility and degree of accessibility. In consideration of both the economic benefits of railway corporations and the travel convenience of passengers, a multitarget optimization model i...

  16. A Sustainable Assessment in the Convenience Food Sector: Ready-made Meals

    OpenAIRE

    Schmidt, Ximena Carolina

    2015-01-01

    The food industry has an essential role in society and in the global economy. Nowadays, modernlifestyle demands convenience, which is driving the development of the food sector. This isparticularly evident with convenience food, especially ready-made meals, industrially preparedfood, which only requires a short preparation time at home by consumers, but has very complexand diverse supply chains and is associated with a range of sustainability issues. Therefore, theaim of this research is to e...

  17. Measuring the controllable variables in the customer experience in convenience stores at filling stations / N. Africa

    OpenAIRE

    Africa, Norman

    2010-01-01

    Convenience stores are playing a pivotal role in the contribution to profitability in the fuels retail environment. In order to increase market share that will lead to increased profits it is imperative to provide excellent customer service. Customer experience has been identified as the key construct in the modern retail environment to be addressed, in order to ensure a satisfied customer. It has been noted that customer experience is not measured in the convenience stores, bu...

  18. Mechanistic Aspects of Aryl-Halide Oxidative Addition, Coordination Chemistry, and Ring-Walking by Palladium.

    Science.gov (United States)

    Zenkina, Olena V; Gidron, Ori; Shimon, Linda J W; Iron, Mark A; van der Boom, Milko E

    2015-11-01

    This contribution describes the reactivity of a zero-valent palladium phosphine complex with substrates that contain both an aryl halide moiety and an unsaturated carbon-carbon bond. Although η(2) -coordination of the metal center to a C=C or C≡C unit is kinetically favored, aryl halide bond activation is favored thermodynamically. These quantitative transformations proceed under mild reaction conditions in solution or in the solid state. Kinetic measurements indicate that formation of η(2) -coordination complexes are not nonproductive side-equilibria, but observable (and in several cases even isolated) intermediates en route to aryl halide bond cleavage. At the same time, DFT calculations show that the reaction with palladium may proceed through a dissociation-oxidative addition mechanism rather than through a haptotropic intramolecular process (i.e., ring walking). Furthermore, the transition state involves coordination of a third phosphine to the palladium center, which is lost during the oxidative addition as the C-halide bond is being broken. Interestingly, selective activation of aryl halides has been demonstrated by adding reactive aryl halides to the η(2) -coordination complexes. The product distribution can be controlled by the concentration of the reactants and/or the presence of excess phosphine.

  19. Iodide-induced thyrotoxicosis in a thyroidectomized patient with metastatic thyroid carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Yoshinari, M.; Tokuyama, T.; Okamura, K.; Sato, K.; Kusuda, K.; Fujishima, M.

    1988-04-15

    An unusual case of iodide-induced thyrotoxicosis is documented in this article. The patient was a 64-year-old euthyroid man with acromegaly. He also had multiple follicular and papillary thyroid carcinomas with a metastatic lesion in the lumbar vertebrae. After a total thyroidectomy, he became slightly hypothyroid, and the lumbar lesion began to incorporate /sup 131/I by scintigraphy. When an iodine-containing contrast medium happened to be injected, a transient increase of serum thyroid hormone level was observed. After complete thyroid ablation with 83 mCi of /sup 131/I, the oral administration of 100 mg of potassium iodide for 7 days induced a prominent increase of serum thyroid hormone level. These findings indicated that the metastatic thyroid carcinoma could produce excess thyroid hormone insofar as a sufficient amount of iodide was given. Although this is the first report of such a case, iodide-induced thyrotoxicosis may not be rare in patients with thyroid carcinomas because the Wolff-Chaikoff effect is thought to be lost, and the organic iodinating activity and lysosomal protease activity are well-preserved.

  20. Reductive degradation of perfluoroalkyl compounds with aquated electrons generated from iodide photolysis at 254 nm

    OpenAIRE

    Park, Hyunwoong; vecitis, Chad D.; Cheng, Jie; Dalleska, Nathan F; Mader, Brian T.; Hoffmann, Michael R.

    2011-01-01

    The perfluoroalkyl compounds (PFCs), perfluoroalkyl sulfonates (PFXS) and perfluoroalkyl carboxylates (PFXA) are environmentally persistent and recalcitrant towards most conventional water treatment technologies. Here, we complete an in depth examination of the UV-254 nm production of aquated electrons during iodide photolysis for the reductive defluorination of six aquated perfluoroalkyl compounds (PFCs) of various headgroup and perfluorocarbon tail length. Cyclic voltammograms (CV) show tha...

  1. The sodium iodide symporter (NIS) and potential regulators in normal, benign and malignant human breast tissue.

    LENUS (Irish Health Repository)

    Ryan, James

    2011-01-01

    The presence, relevance and regulation of the Sodium Iodide Symporter (NIS) in human mammary tissue remains poorly understood. This study aimed to quantify relative expression of NIS and putative regulators in human breast tissue, with relationships observed further investigated in vitro.

  2. Relaxation of the Silver/Silver Iodide Electrode in Aqueous Solution

    NARCIS (Netherlands)

    Peverelli, K.J.

    1979-01-01

    The aim of this study is to detect and characterize relaxation processes on silver/silver iodide electrodes in aqueous electrolyte solution. The information obtained is to be used for an estimation of the consequences of similar processes on colloidal AgI particles during encounter.In chapter 1 a ge

  3. LIQUID-CRYSTALLINE AND THERMOCHROMIC BEHAVIOR OF 4-SUBSTITUTED 1-METHYLPYRIDINIUM IODIDE SURFACTANTS

    NARCIS (Netherlands)

    NUSSELDER, JJH; ENGBERTS, JBFN; VANDOREN, HA

    1993-01-01

    The mesogenic behaviour of a series of thirty-one 1-alkyl-4-(or 2-)alkyl-pyridinium salts and of a homologous series of four 1-methyl-4-n-alkoxycarbonylpyridinium iodides is described. The occurrence and stability range of the thermotropic phases depend dramatically on the structure of the surfactan

  4. Theoretical calculations of primary particle condensation for cadmium and caesium iodide vapours

    International Nuclear Information System (INIS)

    This report considers a model of aerosol nucleation from the vapour phase which has been developed by Buckle. The applicability of the model has been tested by considering the condensation of caesium iodide and cadmium vapours under a wide variety of pre-mixed flow conditions of interest to PWR severe accident studies. (U.K.)

  5. Photodissociation of sodium iodide and resonant ionization of sodium atom produced

    Institute of Scientific and Technical Information of China (English)

    HUO Bing-hai; Z.T.Salim; A.H.Bakery

    2004-01-01

    Resonant ionization spectroscopy (RIS) and resonant ionization mass spectroscopy (RIMS) are employed to detect the photodissociation product of sodium iodide molecules in a molecular beam in an intense laser field in the absence of the buffer gases. Time of flight mass spectra is recorded. In particular, the appearances of multiphoton ionization are discussed.

  6. Regioselective iodination of aromatic compounds with potassium iodide in the presence of benzyltriphenylphosphonium perchlorate

    Institute of Scientific and Technical Information of China (English)

    Jalal Albadi; Masoumeh Abedini; Nasir Iravani

    2012-01-01

    A simple and efficient method for the selective iodination of various aromatic compounds by using potassium iodide in the presence of benzyltriphenylphosphonium perchlorate,is reported.This method provides several advantages such as good selectivity between ortho and para positions of aromatic compounds and high yields of the products.

  7. Kinetic modeling of the purging of activated carbon after short term methyl iodide loading

    International Nuclear Information System (INIS)

    A bimolecular reaction model containing the physico-chemical parameters of the adsorption and desorption was developed earlier to describe the kinetics of methyl iodide retention by activated carbon adsorber. Both theoretical model and experimental investigations postulated constant upstream methyl iodide concentration till the maximum break-through. The work reported here includes the extension of the theoretical model to the general case when the concentration of the challenging gas may change in time. The effect of short term loading followed by purging with air, and an impulse-like increase in upstream gas concentration has been simulated. The case of short term loading and subsequent purging has been experimentally studied to validate the model. The investigations were carried out on non-impregnated activated carbon. A 4 cm deep carbon bed had been challenged by methyl iodide for 30, 90, 120 and 180 min and then purged with air, downstream methyl iodide concentration had been measured continuously. The main characteristics of the observed downstream concentration curves (time and slope of break-through, time and amplitude of maximum values) showed acceptable agreement with those predicted by the model

  8. Ammonium-iodide route to anhydrous EuI2:mechanism and preparation

    Institute of Scientific and Technical Information of China (English)

    刁成鹏; 余金秋; 李红卫; 彭鹏; 吴浩; 何华强; 颜世宏; 胡运生

    2015-01-01

    Anhydrous EuI2 is an essential raw material for novel Eu2+-doped halide scintillators such as SrI2:Eu, CsBa2I5:Eu and BaBrI:Eu. An efficient and economic method to produce high purity anhydrous EuI2 is critical for future development and applications of these scintillators. In this paper, the ammonium-iodide route to anhydrous EuI2 was investigated, and anhydrous EuI2 with purity of 99.95 wt.%was successfully prepared. The dehydration mechanisms of europium iodide hydrate and its mixture with NH4I were comparatively investigated by X-ray diffraction (XRD), thermal analysis and fluorescence spectroscopy. The thermal decomposition process of individual europium iodide hydrate was revealed as follows:EuI3·9H2O→EuI3·8H2O→EuI3·7H2O→EuI2·H2O→EuI2, and the hydrolysis mechanism of europium hydrate was comprehensively studied. When europium iodide hydrate was dehydrated with NH4I, NH4Eu2I5 formed as an intermediate product, and the hydrolysis of EuI2 was effectively restrained. The role of NH4I as an io-dination agent was also discussed.

  9. Leaching of iodide (I(-)) and iodate (IO3(-)) anions from synthetic layered double hydroxide materials.

    Science.gov (United States)

    Theiss, Frederick L; Ayoko, Godwin A; Frost, Ray L

    2016-09-15

    Several studies have previously demonstrated that layered double hydroxides (LDHs) show considerable potential for the adsorption of radioiodine from aqueous solution; however, few studies have demonstrated that these materials are able to store radioactive (131)I for an acceptable period. The leaching of iodide (I(-)) and iodate (IO3(-)) form Mg/Al LDHs has been carried out. Contact time appeared to be a more significant variable for the leaching of iodate (IO3(-)) compared to that of iodide (I(-)). Experimental results are fitted to the pseudo second order model, suggesting that diffusion is likely to be the rate-limiting step. The presence of carbonate in the leaching solution appeared to significantly increase the leaching of iodide (I(-)) as did the presence of chloride to a lesser extent. The maximum amount of iodate (IO3(-)) leached using ultrapure water as the leaching solution was 21% of the iodate (IO3(-)) originally present. The corresponding result for iodide (I(-)) was even lower at 3%. PMID:27309951

  10. Activation of lactoperoxidase by heme-linked protonation and heme-independent iodide binding.

    Science.gov (United States)

    Toyama, Akira; Tominaga, Aya; Inoue, Tatsuo; Takeuchi, Hideo

    2010-01-01

    Lactoperoxidase (LPO), a mammalian secretory heme peroxidase, catalyzes the oxidation of thiocyanate by hydrogen peroxide to produce hypothiocyanate, an antibacterial agent. Although LPO is known to be activated at acidic pH and in the presence of iodide, the structural basis of the activation is not well understood. We have examined the effects of pH and iodide concentration on the catalytic activity and the structure of LPO. Electrochemical and colorimetric assays have shown that the catalytic activity is maximized at pH 4.5. The heme Soret absorption band exhibits a small red-shift at pH 5.0 upon acidification, which is ascribable to a structural transition from a neutral to an acidic form. Resonance Raman spectra suggest that the heme porphyrin core is slightly contracted and the Fe-His bond is strengthened in the acidic form compared to the neutral form. The structural change of LPO upon activation at acidic pH is similar to that observed for myeloperoxidase, another mammalian heme peroxidase, upon activation at neutral pH. Binding of iodide enhances the catalytic activity of LPO without affecting either the optimum pH of activity or the heme structure, implying that the iodide binding occurs at a protein site away from the heme-linked protonation site.

  11. Iodide accumulation provides kelp with an inorganic antioxidant impacting atmospheric chemistry

    Science.gov (United States)

    Küpper, Frithjof C.; Carpenter, Lucy J.; McFiggans, Gordon B.; Palmer, Carl J.; Waite, Tim J.; Boneberg, Eva-Maria; Woitsch, Sonja; Weiller, Markus; Abela, Rafael; Grolimund, Daniel; Potin, Philippe; Butler, Alison; Luther, George W.; Kroneck, Peter M. H.; Meyer-Klaucke, Wolfram; Feiters, Martin C.

    2008-01-01

    Brown algae of the Laminariales (kelps) are the strongest accumulators of iodine among living organisms. They represent a major pump in the global biogeochemical cycle of iodine and, in particular, the major source of iodocarbons in the coastal atmosphere. Nevertheless, the chemical state and biological significance of accumulated iodine have remained unknown to this date. Using x-ray absorption spectroscopy, we show that the accumulated form is iodide, which readily scavenges a variety of reactive oxygen species (ROS). We propose here that its biological role is that of an inorganic antioxidant, the first to be described in a living system. Upon oxidative stress, iodide is effluxed. On the thallus surface and in the apoplast, iodide detoxifies both aqueous oxidants and ozone, the latter resulting in the release of high levels of molecular iodine and the consequent formation of hygroscopic iodine oxides leading to particles, which are precursors to cloud condensation nuclei. In a complementary set of experiments using a heterologous system, iodide was found to effectively scavenge ROS in human blood cells. PMID:18458346

  12. Preparation and Luminescence Thermochromism of Tetranuclear Copper(I)-Pyridine-Iodide Clusters

    Science.gov (United States)

    Parmeggiani, Fabio; Sacchetti, Alessandro

    2012-01-01

    A simple and straightforward synthesis of a tetranuclear copper(I)-pyridine-iodide cluster is described as a laboratory experiment for advanced inorganic chemistry undergraduate students. The product is used to demonstrate the fascinating and visually impressive phenomenon of luminescence thermochromism: exposed to long-wave UV light, the…

  13. Experimental study on iodine chemistry (EXSI) - Containment experiments with methyl iodide

    Energy Technology Data Exchange (ETDEWEB)

    Holm, J.; Ekberg, C. (Chalmers Univ. of Technology, Goeteborg (Sweden)); Kaerkelae, T.; Auvinen, A. (VTT, Espoo (Finland)); Glaenneskog, H. (Vattenfall Power Consultant, Goeteborg (Sweden))

    2011-05-15

    An experimental study on radiolytic decomposition of methyl iodide was conducted in co-operation between VTT and Chalmers University of Technology as a part of the NKS-R programs. In year 2008 the NROI project, a Nordic collaboration studying iodine chemistry in the containment, was started. During year 2008 (NROI-1) the radiolytic oxidation of elemental iodine was investigated and during 2009 (NROI-2), the radiolytic oxidation of organic iodine was studied. This project (NROI-3) is a continuation of the investigation of the oxidation of organic iodine. The project has been divided into two parts. 1. The aims of the first part were to investigate the effect of ozone and UV-radiation, in dry and humid conditions, on methyl iodide. 2. The second project was about gamma radiation (approx20 kGy/h) and methyl iodide in dry and humid conditions. 1. Experimental results showed that the methyl iodide concentration in the facility was reduced with increasing temperature and increasing UV-radiation intensity. Similar behaviour occurred when ozone was present in the system. Formed organic gas species during the decomposition of methyl iodide was mainly formaldehyde and methanol. The particle formation was instant and extensive when methyl iodide was exposed to ozone and/or radiation at all temperatures. The size of the formed primary particles was about 10 nm and the size of secondary particles was between 50-200 nm. From the SEM-EDX analyses of the particles, the conclusion was drawn that these were some kind of iodine oxides (I{sub xO{sub y}). However, the correct speciation of the formed particles was difficult to obtain because the particles melted and fused together under the electron beam. 2. The results from this sub-project are more inconsistent and hard to interpret. The particle formation was significant lesser than corresponding experiments when ozone/UV-radiation was used instead of gamma radiation. The transport of gaseous methyl iodide through the facility was

  14. Palladium-catalyzed Cs2CO3-promoted arylation of unactivated C(sp(3))-H bonds by (diacetoxyiodo)arenes: shifting the reactivity of (diacetoxyiodo)arenes from acetoxylation to arylation.

    Science.gov (United States)

    Gou, Quan; Zhang, Zhao-Fu; Liu, Zhi-Cheng; Qin, Jun

    2015-03-20

    PdCl2(CH3CN)2-catalyzed arylation of unactivated C(sp(3))-H bonds using (diacetoxyiodo)arenes as arylation reagents is reported. The reactivity of (diacetoxyiodo)arenes as arylation reagents is enabled in the presence of Cs2CO3 under the reaction conditions. This arylation method is highly efficient and occurs without the use of silver salt. The reaction tolerates a broad substrate scope that was not demonstrated by other silver salt-free C(sp(3))-H bond arylation conditions. The synthetic utility of the method is further illustrated in the synthesis of the psychotropic drug phenibut. A detailed mechanism study has been conducted to understand the reaction pathway. PMID:25763683

  15. Conversion of Iodide to Hypoiodous Acid and Molecular Iodine at the Air-Water Interface

    Science.gov (United States)

    Pillar, E. A.; Guzman, M. I.

    2013-12-01

    Sea spray aerosols continuously transfer a significant amount of halides to the marine boundary layer, where they play a major role in the depletion of tropospheric ozone. The reactivity of iodide is of special interest in sea spray aerosols, where this species is enriched relative to chloride and bromide in surface seawater. This work presents laboratory experiments that provide mechanistic information to understand the reactivity of halides in atmospheric aerosols. Pneumatically assisted electrospray is used to aerosolize solutions of sodium iodide (0.01-100 μM), which are rapidly (~3 μs) oxidized by ozone at 25 °C. Reaction products include HIO, IO2-, IO3-, I2, HI2O-, and I3-, all identified by mass spectrometry. The distribution of products varies along two different reaction pathways, one favoring the production of I2 and HIO for typical tropospheric ozone levels (~50 ppbv), and another one directed to the production of IO3- at higher oxidizer concentrations. The formation of products increases exponentially with rising concentrations of initial sodium iodide, [NaI]0. The process is determined to be pH independent for the pH range 6-8 representative of surface waters. The substitution of aqueous solutions by organic solvents, such as methanol or acetonitrile, causes a decrease in the surface tension and lifetime of the droplets, leading to larger I2 production. The presence of surface active organic compounds, which alter the structure of the interfacial region, promote the pathway of I2 formation over IO3-. In conclusion, this presentation will show how the oxidation of iodide in aqueous microdroplets can release reactive gas-phase species, such as I2 and HIO, capable to affect tropospheric ozone globally. Normalized intensity of products observed during the ozonolysis of iodide solutions at 130 ppbv ozone. Cone voltage = 70 V, needle voltage = 2.5 kV.

  16. [The application of eosin and propidium iodide in evaluation of vitality of human spermatozoa].

    Science.gov (United States)

    Ploskonos, М В

    2014-11-01

    The article analyzes comparative assessment of vitality of spermatozoa by condition of permeability of membranes for eosin and propidium iodide and comparison of results acquired using technique of light and fluorescent microscopy. The comparison of data of light microscopy with eosin staining with data of fluorescent microscopy with propidium iodide staining demonstrated that percentage of content of spermatozoa separated from ejaculates of 28 fertile males and stained with eosin was reliably higher (34.8 ± 3.2) than percentage of content of spermatozoa with stained with propidium iodide (2.1 ± 4.0). After incubation of spermatozoa under room temperature during 24 hours percentage of unviable cells with stained eosin also was higher than in case of propidium iodide staining correspondingly (44.5 ± 3.3% and 34.7 ± 3.6%). The analysis of vitality of spermatozoa under damaging effect of oxidative stress on cell membrane developed by 4 hours incubation with 200 mkM of hydrogen peroxide (H2O2) demonstrated that under staining of spermatozoa with propidium iodide significantly higher percentage of damaged cells is detected. In such cases, eosin staining is less suitable for detection of vitality of spermatozoa (73.6 ± 5.8% against 51.7 ± 6.4%). The carried out experiment demonstrates that in case of detected effects on spermatozoa (for example, effect of oxidative stress) the light microscopy insufficiently adequate reflects degree of damage of membranes of spermatozoa. The fluorescent microscopy detects a higher percentage of spermatozoa with damaged membrane.

  17. C-N Coupling of nitrogen nucleophiles with aryl and heteroaryl bromides using aminoarenethiolato-copper(I) (pre-)catalyst

    NARCIS (Netherlands)

    Sperotto, Elena; Klink, Gerard P.M. van; Vries, Johannes G. de; Koten, Gerard van

    2010-01-01

    The activity of a library of 2-aminoarenethiolato-copper(I) (CuSAr) (pre-)catalyst was explored in the arylation reaction of amines and N-containing heterocycles with aryl and heteroaryl bromides, respectively. These CuSAr pre-catalysts are thermally stable, are soluble in common organic solvents an

  18. Homocoupling of aryl halides in flow: Space integration of lithiation and FeCl3 promoted homocoupling

    OpenAIRE

    Aiichiro Nagaki; Yuki Uesugi; Yutaka Tomida; Jun-ichi Yoshida

    2011-01-01

    The use of FeCl3 resulted in a fast homocoupling of aryllithiums, and this enabled its integration with the halogen–lithium exchange reaction of aryl halides in a flow microreactor. This system allows the homocoupling of two aryl halides bearing electrophilic functional groups, such as CN and NO2, in under a minute.

  19. Homocoupling of aryl halides in flow: Space integration of lithiation and FeCl3 promoted homocoupling

    OpenAIRE

    Nagaki, Aiichiro; Uesugi, Yuki; Tomida, Yutaka; Yoshida, Jun-ichi

    2011-01-01

    The use of FeCl3 resulted in a fast homocoupling of aryllithiums, and this enabled its integration with the halogen–lithium exchange reaction of aryl halides in a flow microreactor. This system allows the homocoupling of two aryl halides bearing electrophilic functional groups, such as CN and NO2, in under a minute.

  20. Dramatic Substituent Effect on the CCL-catalyzed Kinetic Resolution of 1-Aryl-2,3-allenols

    Institute of Scientific and Technical Information of China (English)

    XU, Dai-Wang(徐代旺); LI, Zu-Yi(李祖义); MA, Sheng-Ming(麻生明)

    2004-01-01

    Optically active 1-aryl-2,3-allenols were obtained via CCL-mediated kinetic resolution of the racemic allenols. The substitution pattern of the aromatic ring, regarding to both the type of the substituent and its position on the aromatic ring, was found to be critical for the kinetic resolution of 1-aryl-2,3-allenols.

  1. Synthesis and Biological Activities of 3-(2-Furyl)-4-aryl- 1, 2, 4-triazole-5-thiones

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A series of novel compounds 3-(2-furyl)-4-aryl-l, 2, 4-triazole-5-thiones have been synthesized. All the compounds were characterized by spectral data and elemental analysis. The preliminary biological test showed that some of them exhibited excellent plant-growth regulative acl ivities.

  2. Efficient N-Arylation and N-Alkenylation of the Five DNA/RNANucleobases

    DEFF Research Database (Denmark)

    Jacobsen, Mikkel Fog; Knudsen, Martin M.; Gothelf, Kurt Vesterager

    2006-01-01

    -substituted pyrimidin-2(1H)-one served as both a cytosine and a uracil precursor and was N-arylated and N-alkenylated in high yields. Adenine was efficiently and selectively N-arylated and N-alkenylated at the N9 position by employing a bis-Boc-protected adenine derivative, while a bis-Boc-protected 2-amino-6...

  3. Intramolecular Acylation of Aryl- and Aroyl-Aliphatic Acids by the Action of Pyrophosphoryl Chloride and Phosphorus Oxychloride

    Directory of Open Access Journals (Sweden)

    Saleh Rayyan

    2001-03-01

    Full Text Available Both pyrophosphoryl chloride and phosphorus oxychloride react with aryl aliphatic acids to form mixed anhydrides which undergo intramolecular acylation to afford cyclic ketones without the addition of a Friedel-Crafts catalyst. Aryl and aroylbenzoic acids could be cyclized to the corresponding anthrones and anthraquinones respectively.

  4. Homocoupling of aryl halides in flow: Space integration of lithiation and FeCl3 promoted homocoupling

    Directory of Open Access Journals (Sweden)

    Aiichiro Nagaki

    2011-08-01

    Full Text Available The use of FeCl3 resulted in a fast homocoupling of aryllithiums, and this enabled its integration with the halogen–lithium exchange reaction of aryl halides in a flow microreactor. This system allows the homocoupling of two aryl halides bearing electrophilic functional groups, such as CN and NO2, in under a minute.

  5. Copper-Catalyzed N-Arylation of Amides Using (S-N-Methylpyrrolidine-2-carboxylate as the Ligand

    Directory of Open Access Journals (Sweden)

    Dong-Sheng Ma

    2010-03-01

    Full Text Available (S-N-methylpyrrolidine-2-carboxylate, a derivative of natural L-proline, was found to be an efficient ligand for the copper-catalyzed Goldberg-type N-arylation of amides with aryl halides under mild conditions. A variety of N-arylamides were synthesized in good to high yields.

  6. Dithiocarbamate promoted practical synthesis of N-Aryl-2-aminobenzazoles: Synthesis of novel Aurora-A kinase inhibitor

    Indian Academy of Sciences (India)

    Naresh Kumar Katari; M Venkatanarayana; Kummari Srinivas

    2015-03-01

    Various N-aryl-2-aminobenzoxazoles and N-aryl-2-aminobenzothiazoles were synthesized from o-aminophenol and o-aminothiophenol, respectively, mediated by dithiocarbamate in one step. The salient features of this method include mild reaction condition, high yield and large scale synthesis. Application of this methodology has been demonstrated by synthesizing potent Aurora kinase-A inhibitors.

  7. A combined experimental and theoretical study of the thermal cycloaddition of aryl azides with activated alkenes.

    Science.gov (United States)

    Zeghada, Sarah; Bentabed-Ababsa, Ghenia; Derdour, Aïcha; Abdelmounim, Safer; Domingo, Luis R; Sáez, José A; Roisnel, Thierry; Nassar, Ekhlass; Mongin, Florence

    2011-06-01

    Reactions were performed from aryl azides on the one hand, and activated alkenes coming from β-dicarbonyl compounds or malonodinitrile on the other hand, either with recourse to conventional heating or to microwave activation, to afford 1-aryl-1H-1,2,3-triazoles. The mechanism and the regioselectivity of the reactions involving β-dicarbonyl compounds have been theoretically studied using DFT methods at the B3LYP/6-31G* level: they are domino processes comprising a tautomeric equilibrium of the β-dicarbonyl compounds with their enol forms, a 1,3-dipolar cycloaddition of the enol forms with the aryl azides (high activation energy), and a dehydration process (lower activation energy). The effect of non-conventional activation methods on the degradation of 1,2,3-triazolines was next studied experimentally. Finally, some of the 1,2,3-triazoles such synthesized were evaluated for their bactericidal and cytotoxic activities. PMID:21494704

  8. A General Palladium-Catalyzed Hiyama Cross-Coupling Reaction of Aryl and Heteroaryl Chlorides.

    Science.gov (United States)

    Yuen, On Ying; So, Chau Ming; Man, Ho Wing; Kwong, Fuk Yee

    2016-05-01

    A general palladium-catalyzed Hiyama cross-coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)2 /L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/L2 system and the water addition protocol can efficiently catalyze a broad range of electron-rich, -neutral, -deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.

  9. Synergistic Effect of Azadirachta Indica Extract and Iodide Ions on the Corrosion Inhibition of Aluminium in Acid Media

    International Nuclear Information System (INIS)

    The synergistic action caused by iodide ions on the corrosion inhibition of aluminium (Al) in 0.5 M HCl in the presence of Azadirachta Indica (AZI) plant extract has been investigated using potintiodynamic polarization and impedance techniques. It is found that AZI extract inhibits the corrosion of aluminium in 0.5 M HCl. The inhibition efficiency increases with the increase in AZI extract concentration, until 24% v/v of AZI extract, then Inh.% is decreased with father increase in AZI extract concentration. The adsorption of this extract in the studied concentration is found to obey Frewendlish adsorption isotherm. The addition of iodide ions enhances the inhibition efficiency to a considerable extent. The increase in Inh.% values in presence of fixed concentration of iodide ions indicates that AZI extract forms an insoluble complex at lower AZI extract concentrations by undergoing a joint adsorption. But at higher concentrations of AZI extract, competitive adsorption is found between iodide ions and the formed complex leading to less Inh.%. The Inh.% decreased in presence of iodide ions with AZI extract than in presence of AZI extract alone at all studied iodide concentrations. The synergism parameter S θ is defined and calculated from surface coverage values. This parameter in the case of AZI extract is found to be more than unity, indicating that the enhanced inhibition efficiency caused by the addition of iodide ions

  10. Contrasting the surface ocean distribution of bromoform and methyl iodide; implications for boundary layer physics, chemistry and climate

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, C J, E-mail: carl.j.palmer@gmail.co [Department of Oceanography, University of Cape Town, 7701 (South Africa)

    2010-08-15

    Bromoform and methyl iodide are both methane-like hydrocarbons with a halogen atom replacing one or more of the hydrogen atoms. Both of these compounds occur naturally in the environment as a result of their production from seaweed and kelp. They are of interest to climate science as a result of their catalytic destruction of boundary layer ozone (a potent greenhouse gas) and, specifically for methyl iodide, the proposed role in the formation of new cloud condensation nuclei with implications for climate. In this paper, the currently available data on the distribution of bromoform and methyl iodide are analysed and contrasted to show that the concentrations of bromoform and methyl iodide do not correlate, that, in contrast to bromoform, the parameterization of sea surface methyl iodide concentrations demands only the sea surface temperature, and that the pelagic distribution of methyl iodide appears to follow the solar zenith angle. These three observations together suggest that, while the pelagic source of bromoform is mostly biogenic, the source of methyl iodide is photochemical. This has implications for the understanding of planetary boundary layer chemistry and potential organohalogen mediated feedbacks to climate.

  11. Contrasting the surface ocean distribution of bromoform and methyl iodide; implications for boundary layer physics, chemistry and climate

    International Nuclear Information System (INIS)

    Bromoform and methyl iodide are both methane-like hydrocarbons with a halogen atom replacing one or more of the hydrogen atoms. Both of these compounds occur naturally in the environment as a result of their production from seaweed and kelp. They are of interest to climate science as a result of their catalytic destruction of boundary layer ozone (a potent greenhouse gas) and, specifically for methyl iodide, the proposed role in the formation of new cloud condensation nuclei with implications for climate. In this paper, the currently available data on the distribution of bromoform and methyl iodide are analysed and contrasted to show that the concentrations of bromoform and methyl iodide do not correlate, that, in contrast to bromoform, the parameterization of sea surface methyl iodide concentrations demands only the sea surface temperature, and that the pelagic distribution of methyl iodide appears to follow the solar zenith angle. These three observations together suggest that, while the pelagic source of bromoform is mostly biogenic, the source of methyl iodide is photochemical. This has implications for the understanding of planetary boundary layer chemistry and potential organohalogen mediated feedbacks to climate.

  12. Oculomotor deficits in aryl hydrocarbon receptor null mouse.

    Directory of Open Access Journals (Sweden)

    Aline Chevallier

    Full Text Available The Aryl hydrocarbon Receptor or AhR, a ligand-activated transcription factor, is known to mediate the toxic and carcinogenic effects of various environmental pollutants such as 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD. Recent studies in Caenorhabditis elegans and Drosophila melanogaster show that the orthologs of the AhR are expressed exclusively in certain types of neurons and are implicated in the development and the homeostasis of the central nervous system. While physiological roles of the AhR were demonstrated in the mammalian heart, liver and gametogenesis, its ontogenic expression and putative neural functions remain elusive. Here, we report that the constitutive absence of the AhR in adult mice (AhR-/- leads to abnormal eye movements in the form of a spontaneous pendular horizontal nystagmus. To determine if the nystagmus is of vestibular, visual, or cerebellar origin, gaze stabilizing reflexes, namely vestibulo-ocular and optokinetic reflexes (VOR and OKR, were investigated. The OKR is less effective in the AhR-/- mice suggesting a deficit in the visuo-motor circuitry, while the VOR is mildly affected. Furthermore, the AhR is expressed in the retinal ganglion cells during the development, however electroretinograms revealed no impairment of retinal cell function. The structure of the cerebellum of the AhR-/- mice is normal which is compatible with the preserved VOR adaptation, a plastic process dependent on cerebellar integrity. Finally, intoxication with TCDD of control adults did not lead to any abnormality of the oculomotor control. These results demonstrate that the absence of the AhR leads to acquired central nervous system deficits in the adults. Given the many common features between both AhR mouse and human infantile nystagmus syndromes, the AhR-/- mice might give insights into the developmental mechanisms which lead to congenital eye disorders.

  13. Hepatic Aryl Hydrocarbon Receptor Attenuates Fibroblast Growth Factor 21 Expression.

    Science.gov (United States)

    Girer, Nathaniel G; Murray, Iain A; Omiecinski, Curtis J; Perdew, Gary H

    2016-07-15

    The Aryl hydrocarbon receptor (AHR) is a ligand-activated transcription factor involved in many physiological processes. Several studies indicate that AHR is also involved in energy homeostasis. Fibroblast growth factor 21 (FGF21) is an important regulator of the fasting and feeding responses. When administered to various genetic and diet-induced mouse models of obesity, FGF21 can attenuate obesity-associated morbidities. Here, we explore the role of AHR in hepatic Fgf21 expression through the use of a conditional, hepatocyte-targeted AHR knock-out mouse model (Cre(Alb)Ahr(Fx/Fx)). Compared with the congenic parental strain (Ahr(Fx/Fx)), non-fasted Cre(Alb)Ahr(Fx/Fx) mice exhibit a 4-fold increase in hepatic Fgf21 expression, as well as elevated expression of the FGF21-target gene Igfbp1 Furthermore, in vivo agonist activation of AHR reduces hepatic Fgf21 expression during a fast. The Fgf21 promoter contains several putative dioxin response elements (DREs). Using EMSA, we demonstrate that the AHR-ARNT heterodimer binds to a specific DRE that overlaps binding sequences for peroxisome proliferator-activated receptor α (PPARα), carbohydrate response element-binding protein (ChREBP), and cAMP response element-binding protein, hepatocyte specific (CREBH). In addition, we reveal that agonist-activated AHR impairs PPARα-, ChREBP-, and CREBH-mediated promoter activity in Hepa-1 cells. Accordingly, agonist treatment in Hepa-1 cells ablates potent ER stress-driven Fgf21 expression, and pre-treatment with AHR antagonist blocks this effect. Finally, we show that pre-treatment of primary human hepatocytes with AHR agonist diminishes PPARα-, glucose-, and ER stress-driven induction of FGF21 expression, indicating the effect is not mouse-specific. Together, our data show that AHR contributes to hepatic energy homeostasis, partly through the regulation of FGF21 expression and signaling. PMID:27226639

  14. Azo-hydrazone tautomerism of aryl azo pyridone dyes

    Directory of Open Access Journals (Sweden)

    Mirković Jelena M.

    2013-01-01

    Full Text Available In the last three or four decades disperse dyes derived from pyridones (in particular azo pyridone dyes have gained in importance, and are widely used in various fields. These compounds have excellent coloration properties, and are suitable for the dyeing of polyester fabrics. Basic features of these dyes are simplicity of their synthesis by diazotation and azo coupling. They generally have high molar extinction coefficient with medium to high light and wet fastness. The absorption maxima of these dyes show their visible absorption wavelength ranging from yellow to orange, which can be attributed to poorly delocalized electrons in the pyridone ring. However, there are several dyes with deep colors such as red or violet. Pyridone dyes with alkyl and aryl groups in ortho position to azo group show 2-pyridone/2-hydroxypyridine tautomerism, while those containing OH and NHR groups conjugated with the azo group show azo-hydrazone tautomerism. Determining azo-hydrazone tautomerism could be therefore interesting, since the tautomers have different physico-chemical properties and most importantly different coloration. The literature on azo-hydrazone tautomerism, determination of equilibrium position, and investigation of substituent and solvent influence on tautomerism has been summarized in the presented review. The general conclusion is that the equilibrium between two tautomers is influenced by the structure of the compounds and by the solvents used. The tautomeric behavior patterns of the arylazo pyridone dyes in the reviewed literature has been studied using various instrumental techniques, including FT-IR, UV-vis, and NMR spectroscopy. The quantum chemical calculations related to the azo-hydrazon tautomerism have also been included. A large number of pyridone dyes exist in hydrazone form in solid state, while in solvents there is a mixture of tautomers. In addition, the X-ray single-crystal diffraction data analysis of some commercial pyridone

  15. Enantiospecific effects of ketoconazole on aryl hydrocarbon receptor.

    Directory of Open Access Journals (Sweden)

    Aneta Novotna

    Full Text Available Azole antifungal ketoconazole (KET was demonstrated to activate aryl hydrocarbon receptor (AhR. Since clinically used KET is a racemic mixture of two cis-enantiomers (2R,4S-(+-KET and (2S,4R-(--KET, we examined the effects of KET enantiomers on AhR signaling pathway. (+-KET dose-dependently activated AhR in human gene reporter cell line AZ-AHR, and displayed 5-20× higher agonist activity (efficacy, as compared to (--KET; both enantiomers were AhR antagonists with equal potency (IC50. Consistently, (+-KET strongly induced CYP1A1 mRNA and protein in human HepG2 cells, while (--KET exerted less than 10% of (+-KET activity. In primary human hepatocytes, both enantiomers preferentially induced CYP1A2 over CYP1A1 mRNA and protein, and the potency of (+-KET was slightly higher as compared to (--KET. Ligand binding assay with guinea pig liver cytosols revealed that both (+-KET and (--KET are weak ligands of AhR that displaced [3H]-TCDD with comparable potency. Similarly, both enantiomers weakly transformed AhR to DNA-binding form with similar potency, as showed by EMSA, in guinea pig liver cytosolic extracts and nuclear extracts from mouse Hepa-1 cells. We also examined effects of KET on glucocorticoid receptor (GR, a regulator of AhR activity. Both KET enantiomers antagonized GR with similar potency, as revealed by gene reporter assay in AZ-GR cell line and down-regulation of tyrosine aminotransferase mRNA in human hepatocytes. Finally, we demonstrate enantiospecific antifungal activities of KET enantiomers in six Candida spp. strains. In conclusion, the significance of current study is providing the first evidence of enatiospecific effects of cis-enantiomers of ketoconazole on AhR-CYP1A pathway.

  16. Facile synthesis, characterization and antimicrobial activities of diphenylphosphoryl derivatives of substituted aryl and nitrogen heterocycles

    Directory of Open Access Journals (Sweden)

    G. Subba Reddy

    2013-03-01

    Full Text Available Diphenylphosphoryl derivatives of substituted aryl and nitrogen heterocycles were prepared by a one-pot process involving sequential reaction of diphenylphosphine chloride with dry methyl alcohol/ethyl alcohol and then with different halides of substituted nitrogen heterocycles/aryl halides. The title compounds (5a-j structures were established by analytical, IR, NMR ( 1H, 13C and 31P and mass spectra, and they have been screened for their antimicrobial activity. They exhibited significant antibacterial and antifungal activity.

  17. Efficient Stille cross-coupling reaction using aryl chlorides or bromides in water.

    Science.gov (United States)

    Wolf, Christian; Lerebours, Rachel

    2003-09-19

    An efficient Stille cross-coupling reaction using a variety of aryl halides in neat water has been developed. Employing palladium-phosphinous acid catalyst [(t-Bu)(2)P(OH)](2)PdCl(2) allows formation of biaryls from aryl chlorides and bromides in good to high yields. Functional groups such as ketones and nitriles are tolerated, and organic cosolvents are not required. The air stability and solubility in water of the palladium complexes used in this study facilitate operation of the coupling reaction and product isolation. The feasibility of catalyst recycling has also been demonstrated. PMID:12968920

  18. Asymmetric synthesis of quaternary aryl amino acid derivatives via a three-component aryne coupling reaction

    Directory of Open Access Journals (Sweden)

    Elizabeth P. Jones

    2011-11-01

    Full Text Available A method was developed for the synthesis of α-alkyl, α-aryl-bislactim ethers in good to excellent yields and high diastereoselectivities, consisting of a facile one-pot procedure in which the aryl group is introduced by means of a nucleophilic addition to benzyne and the alkyl group by alkylation of a resultant benzylic anion. Hydrolysis of the sterically less hindered adducts gave the corresponding quaternary amino acids with no racemization, whereas hydrolytic ring opening gave the corresponding valine dipeptides from bulkier bislactims.

  19. A combined experimental and theoretical study of the thermal cycloaddition of aryl azides with activated alkenes.

    OpenAIRE

    Zeghada, Sarah; Bentabed-Ababsa, Ghenia; Derdour, Aïcha; Abdelmounim, Safer; Domingo, Luis .R.; Sáez, José A.; Roisnel, Thierry; Nassar, Ekhlass; Mongin, Florence

    2011-01-01

    Reactions were performed from aryl azides on the one hand, and activated alkenes coming from β-dicarbonyl compounds or malonodinitrile on the other hand, either with recourse to conventional heating or to microwave activation, to afford 1-aryl-1H-1,2,3-triazoles. The mechanism and the regioselectivity of the reactions involving β-dicarbonyl compounds have been theoretically studied using DFT methods at the B3LYP/6-31G* level: they are domino processes comprising a tautomeric equilibrium of th...

  20. Synthesis and antifungal activity of novel (1-aryl-2-heterocyclyl)ethylideneaminooxymethyl-substituted dioxolanes

    International Nuclear Information System (INIS)

    A novel series of (1-aryl-2-heterocyclyl)ethylideneaminooxymethyl -substituted dioxolanes IIIa-n were synthesized by condensation of substituted 1,3-dioxolan-4-ylmethyl p-toluenesulfonates 4 with 1-(hydroxyimino)-1-aryl-2-heterocyclylethanes 5. Compounds IIIa-n were found to have effective in vitro antifungal activity when evaluated against the pathogenic fungi Candida albicans, Aspergillus flavus and Fusarium solani with MIC (minimum inhibitory concentration) values of 10 μg-ml-1 for IIIa-I and 5 μg-ml-1 for IIIm,n. (authors). 24 refs., 4 figs., 5 tabs

  1. Modular isoquinoline synthesis using catalytic enolate arylation and in situ functionalization.

    Science.gov (United States)

    Pilgrim, Ben S; Gatland, Alice E; McTernan, Charlie T; Procopiou, Panayiotis A; Donohoe, Timothy J

    2013-12-20

    A methyl ketone, an aryl bromide, an electrophile, and ammonium chloride were combined in a four-component, three-step, and one-pot coupling procedure to furnish substituted isoquinolines in overall yields of up to 80%. This protocol utilizes the palladium catalyzed α-arylation reaction of an enolate, followed by in situ trapping with an electrophile, and aromatization with ammonium chloride. tert-Butyl cyanoacetate participated in a similar protocol; after functionalization and decarboxylation, 3-amino-4-alkyl isoquinolines were prepared in high yield. PMID:24251885

  2. 48 CFR 52.249-1 - Termination for Convenience of the Government (Fixed-Price) (Short Form).

    Science.gov (United States)

    2010-10-01

    ... Convenience of the Government (Fixed-Price) (Short Form). 52.249-1 Section 52.249-1 Federal Acquisition... Convenience of the Government (Fixed-Price) (Short Form) (APR 1984) The Contracting Officer, by written notice... CONTRACT CLAUSES Text of Provisions and Clauses 52.249-1 Termination for Convenience of the...

  3. Synthesis of cholesteryl-α-D-lactoside via generation and trapping of a stable β-lactosyl iodide

    Science.gov (United States)

    Davis, Ryan A.; Fettinger, James C.; Gervay-Hague, Jacquelyn

    2015-01-01

    The generation of β-lactosyl iodide was carried out under non-in situ-anomerization, metal free conditions by reacting commercially available β-per-O-acetylated lactose with trimethylsilyl iodide (TMSI). The β-iodide was surprisingly stable as evidenced by NMR spectroscopy. Introduction of octanol or cholesterol under microwave conditions gave high yields of α-linked glycoconjugates. Careful analysis of the reaction products and mechanistic considerations suggest an acid catalyzed rearrangement that provides α-linked glycosylation products with a free C2-hydroxyl. Accessibility to these compounds may further advance glycolipidomic profiling of immune modulating bacterial derived-glycans. PMID:26543257

  4. Synthesis of 2-Substituted Aryl Benzoxazoles Catalyzed by Ammonium Metavanadate%偏钒酸铵催化合成2-芳基取代苯并噁唑

    Institute of Scientific and Technical Information of China (English)

    肖立伟

    2011-01-01

    在偏钒酸铵催化下,以2-氨基苯酚和芳醛为原料、乙醇为溶剂,在室温下合成了一系列2-芳基取代苯并噁唑类化合物.该方法具有操作简便、反应条件温和、产率高等优点.%Ammonium metavanadate was found to be a practical catalyst for synthesizing 2-substituted aryl benzoxazoles, starting from 2-amino-phenol and aromatic aldehydes in ethanol at room temperature.The method was proved to be simple and convenient, and the product was isolated with excellent yields.

  5. Convenience foods, as portrayed by a consumer organisation. Test-Aankoop/Test-Achats (1960-1995).

    Science.gov (United States)

    Degreef, Filip

    2015-11-01

    Food choice, both today and in the past, is driven by a broad range of interacting factors, in which culture is centrally placed. This paper will assess convenience foods by means of a qualitative analysis of comparative product tests done by Belgium's largest consumer organisation Test-Aankoop/Test-Achats, and will focus on the influence of socially and culturally normative values between the years 1960 and 1995. The tests provide a unique insight into attitudes to convenience foods within an organisation that saw its role in Belgian consumer society as being both educator and guide. The organisation's views on health, food safety, modernity, tradition, control over ingredients and content, gender roles and taste shaped its attitude to the role and meaning of what food is supposed to be. The organisation thereby both guided and re-affirmed normative values with respect to convenience foods. Values, which are culturally constructed, have always played a key role in the acceptability of products. Cultural and social inhibitions and fears over control of convenience foods, which persist today, were central in the consumer organisation's representation of convenience food.

  6. Part I. Voltammetric studies of potassium iodide at gold and platinum electrodes. Part II. Electrodeposition and characterization of poly(vinylferrocene) films

    Energy Technology Data Exchange (ETDEWEB)

    Holt, R.J.

    1993-01-01

    A mechanism for the adsorption of iodide on platinum and gold has been proposed in the literature which assumes hydrogen gas is evolved along with an adsorbed iodide atom. A rotating platinum ring-disk electrode was used here to detect the presence of any hydrogen produced upon iodide adsorption. No evidence for hydrogen formation was found. A gold-gold/platinum gas permeable double membrane electrode also did not show any evidence of hydrogen gas produced at gold during iodide adsorption. The voltammetry of iodide and iodate was examined using both gold and platinum ring-disk electrodes and a gas permeable double membrane electrode. The oxidation of adsorbed iodide was examined. The successful determination of the various oxidation states of iodide in acid media were performed: I[sub 2], IO[sup [minus

  7. Experimental study on iodine chemistry (EXSI) - Containment experiments with methyl iodide

    Energy Technology Data Exchange (ETDEWEB)

    Holm, J.; Glaenneskog, H.; Ekberg, C. (Chalmers Univ. of Technology (Sweden)); Kaerkelae, T.; Auvinen, A. (VTT Technical Research Centre of Finland (Finland))

    2010-05-15

    An experimental study on radiolytic decomposition of methyl iodide was conducted in co-operation between VTT and Chalmers University of Technology as a part of the NKS-R programs. The behaviour of iodine during a severe accident has been studied in several experimental programs, ranging from the large-scale PHEBUS FP tests and intermediate-scale ThAI tests to numerous separate effect studies. In year 2008 the NROI project, a Nordic collaboration studying iodine chemistry in the containment was started. During 2009, oxidation of iodine, especially organic iodine, was studied within the NROI project. The chemistry of organic iodine in the gas phase is still one of the greatest remaining uncertainties concerning iodine behaviour during a severe accident. During the first year of the NROI project the oxidation of elemental iodine, I2, with ozone and UV-light was investigated. In this study organic iodide, in this case methyl iodide, was investigated in similar conditions as in the NROI-1 project. The experimental facility applied in this study is based on the sampling system built at VTT for the ISTP project CHIP conducted by IRSN. The experimental facility and the measuring technology are sophisticated and unique in the area of nuclear research as well as in the field of aerosol science. Experimental results showed that the methyl iodide concentration in the facility was reduced with increasing temperature and increasing UVC intensity. Similar behaviour occurred when ozone was present in the system. Formed organic gas species during the decomposition of methyl iodide was mainly formaldehyde and methanol. Instant and extensive particle formation occurred when methyl iodide was transported through a UVC radiation field and/or when ozone was present. The size of the formed primary particles was about 10 nm and the size of secondary particles was between 50-150 nm. From the SEM-EDX analyses of the particles, the conclusion was drawn that these were some kind of iodine

  8. High-Speed Train Stop-Schedule Optimization Based on Passenger Travel Convenience

    Directory of Open Access Journals (Sweden)

    Dingjun Chen

    2016-01-01

    Full Text Available The stop-schedules for passenger trains are important to the operation planning of high-speed trains, and they decide the quality of passenger service and the transportation efficiency. This paper analyzes the specific manifestation of passenger travel convenience and proposes the concepts of interstation accessibility and degree of accessibility. In consideration of both the economic benefits of railway corporations and the travel convenience of passengers, a multitarget optimization model is established. The model aims at minimizing stop cost and maximizing passenger travel convenience. Several constraints are applied to the model establishment, including the number of stops made by individual trains, the frequency of train service received by each station, the operation section, and the 0-1 variable. A hybrid genetic algorithm is designed to solve the model. Both the model and the algorithm are validated through case study.

  9. Attitudes and behaviour towards convenience food and food waste in the United Kingdom.

    Science.gov (United States)

    Mallinson, Lucy J; Russell, Jean M; Barker, Margo E

    2016-08-01

    Households in the UK discard much food. A reduction in such waste to mitigate environmental impact is part of UK government policy. This study investigated whether household food waste is linked to a lifestyle reliant on convenience food in younger consumers. A survey of 928 UK residents aged 18-40 years and responsible for the household food shopping (male n = 278; female n = 650) completed an online questionnaire designed to measure attitudes to convenience food and to quantify household food waste. Cluster analysis of 24 food-related lifestyle factors identified 5 consumer groups. General linear modelling techniques were used to test relationships between the purchase frequency of convenience food and household food waste. From the cluster analysis, five distinct convenience profiles emerged comprising: 'epicures' (n = 135), 'traditional consumers' (n = 255), 'casual consumers' (n = 246), 'food detached consumers' (n = 151) and 'kitchen evaders' (n = 141). Casual consumers and kitchen evaders were the most reliant on convenience food and notably were the most wasteful. The demographic profile of kitchen evaders matched the population groups currently targeted by UK food waste policy. Casual consumers represent a new and distinct group characterised by "buy a lot and waste a lot" behaviour. Household size, packaging format, price-awareness and marketing all appear to influence levels of food waste. However, it seems that subtle behavioural and sociocultural factors also have impact. Further research is needed to elucidate the factors that mediate the positive association between the purchase of convenience food and reported food waste in order to inform food waste policy and initiatives. PMID:26993575

  10. Attitudes and behaviour towards convenience food and food waste in the United Kingdom.

    Science.gov (United States)

    Mallinson, Lucy J; Russell, Jean M; Barker, Margo E

    2016-08-01

    Households in the UK discard much food. A reduction in such waste to mitigate environmental impact is part of UK government policy. This study investigated whether household food waste is linked to a lifestyle reliant on convenience food in younger consumers. A survey of 928 UK residents aged 18-40 years and responsible for the household food shopping (male n = 278; female n = 650) completed an online questionnaire designed to measure attitudes to convenience food and to quantify household food waste. Cluster analysis of 24 food-related lifestyle factors identified 5 consumer groups. General linear modelling techniques were used to test relationships between the purchase frequency of convenience food and household food waste. From the cluster analysis, five distinct convenience profiles emerged comprising: 'epicures' (n = 135), 'traditional consumers' (n = 255), 'casual consumers' (n = 246), 'food detached consumers' (n = 151) and 'kitchen evaders' (n = 141). Casual consumers and kitchen evaders were the most reliant on convenience food and notably were the most wasteful. The demographic profile of kitchen evaders matched the population groups currently targeted by UK food waste policy. Casual consumers represent a new and distinct group characterised by "buy a lot and waste a lot" behaviour. Household size, packaging format, price-awareness and marketing all appear to influence levels of food waste. However, it seems that subtle behavioural and sociocultural factors also have impact. Further research is needed to elucidate the factors that mediate the positive association between the purchase of convenience food and reported food waste in order to inform food waste policy and initiatives.

  11. Determining a Checkout Register Opening Policy to Maximize Profit In convenience Stores Chains

    Directory of Open Access Journals (Sweden)

    E. Ruelas-Gonzalez

    2010-12-01

    Full Text Available A major concern for convenience store managers is lost sales due to balking. Convenience stores customers payhigh margins expecting fast service. If waiting lines are too long for their tolerance level at their arrival, they balk andthe sale is lost as a result. In order to reduce lost sales, the length of the waiting line is usually controlled by openingadditional checkout registers when the number of customers standing in the line exceeds a specified number andmaintaining them open until they are no longer needed . This paper presents an applied approach to model theprobability that customers actually enter the store and define the optimal opening level (

  12. Aryl hydrocarbon receptor mediates benzene-induced hematotoxicity.

    Science.gov (United States)

    Yoon, Byung-Il; Hirabayashi, Yoko; Kawasaki, Yasushi; Kodama, Yukio; Kaneko, Toyozo; Kanno, Jun; Kim, Dae-Yong; Fujii-Kuriyama, Yoshiaki; Inoue, Tohru

    2002-11-01

    Benzene can induce hematotoxicity and leukemia in humans and mice. Since a review of the literature shows that the CYP2E1 knockout mouse is not known to possess any benzene toxicity, the metabolism of benzene by CYP2E1 in the liver is regarded to be prerequisite for its cytotoxicity and genotoxicity, although the mechanism is not fully understood yet. Because it was found some years ago that benzene was also a substrate for CYP1A1, we investigated the involvement of the aryl hydrocarbon receptor (AhR) in benzene hematotoxicity using AhR wild-type (AhR(+/+)), heterozygous (AhR(+/-)), and homozygous (AhR(-/-)) male mice. Interestingly, following a 2-week inhalation of 300 ppm benzene (a potent dose for leukemogenicity), no hematotoxicity was induced in AhR(-/-) mice. Further, there were no changes in cellularity of peripheral blood and bone marrow (BM), nor in levels of granulocyte-macrophage colony-forming units in BM. This lack of hematotoxicity was associated with the lack of p21 overexpression, which was regularly seen in the wild-type mice following benzene inhalation. Combined treatment with two major benzene metabolites, phenol and hydroquinone, induced hemopoietic toxicity, although it was not known whether this happened due to a surprising lack of expression of CYP2E1 by AhR knockout, or due to a lack of other AhR-mediated CYP enzymes, including 1A1 (i.e., a possible alternative pathway of benzene metabolism). The former possibility, evaluated in the present study, failed to show a significant relationship between AhR and the expression of CYP2E1. Furthermore, a subsequent evaluation of AhR expression after benzene inhalation tended to show higher but less significant expression in the liver, and none in the BM, compared with sham control. Although this study failed to identify the more likely of the above-mentioned two possibilities, the study using AhR knockout mice on benzene inhalation presents the unique possibility that the benzene toxicity may be

  13. Reversible radiochromic plate based on polyvinyl alcohol-iodide complex containing silica nanoparticles

    International Nuclear Information System (INIS)

    A radiochromic plate based on a reversible change between iodide and iodine was prepared using a polyvinyl alcohol-iodide complex, silica nanoparticles, and agarose. X-ray (30 kV, 15 mA) irradiation of the plate changed it to a red color, which gradually disappeared and was completely erased within a day after stopping X-ray irradiation. The minimum detection dose was about 0.5 Gy for X-rays and 10 Gy for 137Cs γ-rays. The G-value for the oxidation of I- was estimated to be about 19.6 in a neutral solution and about 20.64 in an acidic solution. (author)

  14. Parametric study on removal efficiency of impregnated activated charcoal and silver zeolite for radioactive methyl iodide

    International Nuclear Information System (INIS)

    The removal efficiency of impregnated activated charcoal and silver zeolite for radioactive methyl iodide is influenced by various parameters such as temperature, relative humidity, face velocity and packing density. This study is to evaluate the dependency of the removal efficiency on each parameter and these combined parameters, quantitatively. Four types of adsorbents, BC-727, AgX, CHC-50 and SS 208C 5KI3, were tested. From experimental data and mass transfer theory, an experimental equation for evaluating the removal efficiency of adsorbents was derived under a series of experiments for radioactive methyl iodine-131. It was concluded that the removal efficiency calculated from the experimental equation agreed well with the experimental value. Effects of experimental specific parameters, such as Pre-flow time, methyl iodide injection time and After-flow time, on the removal efficiency of adsorbent are also described

  15. Iodide Recognition and Sensing in Water by a Halogen-Bonding Ruthenium(II)-Based Rotaxane.

    Science.gov (United States)

    Langton, Matthew J; Marques, Igor; Robinson, Sean W; Félix, Vítor; Beer, Paul D

    2016-01-01

    The synthesis and anion-recognition properties of the first halogen-bonding rotaxane host to sense anions in water is described. The rotaxane features a halogen-bonding axle component, which is stoppered with water-solubilizing permethylated β-cyclodextrin motifs, and a luminescent tris(bipyridine)ruthenium(II)-based macrocycle component. (1) H NMR anion-binding titrations in D2 O reveal the halogen-bonding rotaxane to bind iodide with high affinity and with selectively over the smaller halide anions and sulfate. The binding affinity trend was explained through molecular dynamics simulations and free-energy calculations. Photo-physical investigations demonstrate the ability of the interlocked halogen-bonding host to sense iodide in water, through enhancement of the macrocycle component's Ru(II) metal-ligand charge transfer (MLCT) emission. PMID:26626866

  16. Induction of iodide uptake in transformed thyrocytes: a compound screening in cell lines

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Eleonore [University of Tuebingen, Department of Endocrinology, Metabolism, Nephrology and Clinical Chemistry, Internal Medicine, Tuebingen (Germany); Brossart, Peter [University of Tuebingen, Department of Haematology, Oncology, Immunology and Rheumatology, Internal Medicine, Tuebingen (Germany); Wahl, Richard [University of Tuebingen, Department of Endocrinology, Metabolism, Nephrology and Clinical Chemistry, Internal Medicine, Tuebingen (Germany); Department IV, Internal Medicine, Tuebingen (Germany)

    2009-05-15

    Retinoic acid presently is the most advanced agent able to improve the efficacy of radioiodine therapy in differentiated thyroid carcinoma. In order to identify compounds with higher efficacy a panel of pharmacologically well-characterized compounds with antitumour action in solid cancer cell lines was screened. The effects of the compounds on iodide uptake, cell number, proliferation and apoptosis were evaluated. In general, compounds were more effective in cell lines derived from more aggressive tumours. The effectiveness in terms of number of responsive cell lines and maximal increase in iodide uptake achieved decreased in the order: APHA > valproic acid {approx} sirolimus {approx} arsenic trioxide > retinoic acid {approx} lovastatin > apicidine {approx} azacytidine {approx} retinol {approx} rosiglitazone {approx} bortezomib. We hypothesize that testing of cells from primary tumours or metastases in patients may be a way to identify compounds with optimum therapeutic efficacy for individualized treatment. (orig.)

  17. Gap energy studied by optical transmittance in lead iodide monocrystals grown by Bridgman's Method

    Directory of Open Access Journals (Sweden)

    Veissid N.

    1999-01-01

    Full Text Available The bandgap energy as a function of temperature has been determined for lead iodide. The monocrystal was obtained in a vacuum sealed quartz ampoule inside a vertical furnace by Bridgman's method. The optical transmittance measurement enables to evaluate the values of Eg. By a fitting procedure of Eg as a function of temperature is possible to extract the parameters that govern its behavior. The variation of Eg with temperature was determined as: Eg(T = Eg(0 - aT2/(a + T, with: Eg(0 = (2.435 ± 0.008 eV, a = (8.7 ± 1.3 x 10-4 eV/K and a = (192 ± 90 K. The bandgap energy of lead iodide at room temperature was found to be 2.277 ± 0.007 eV.

  18. Non-isothermal adsorption of radioactive methyl iodide at high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Byung Seon; Park, Geun Il; Lee, Jung Won; Yoon, Ju Hyeon [KAERI, Taejon (Korea, Republic of); Yang, Ho Yeon [KHNPC, Taejon (Korea, Republic of); Ryu, Seung Kon [Chungnam National Univ., Taejon (Korea, Republic of)

    2003-07-01

    Although activated carbon has been successfully used in nuclear power plants, it cannot be considered as a primary adsorbent in a high temperature system, because of its low ignition temperature and its adverse reaction with nitrogen oxide. Therefore, activated carbon is virtually ruled out for high temperature operating systems. The adsorption and dynamic characteristics of gaseous methyl iodide for silver ion-exchanged zeolites at high temperatures up to 400 .deg. C was evaluated. In this study a simple nonisothermal and axially dispersed plug-flow was adopted to simulate the experimental breakthrough curves. The Langmuir-Freundlich isotherm model was used to represent the equilibrium relationship, and the linear driving force (LDF) approximation was used to represent the article uptake. From the viewpoint of silver utilization for the removal of methyl iodide, both the optimal operating temperature and the effective silver ion-exchange level were also determined.

  19. Performance of non-coconut base adsorbers in removal of iodine and organic iodides

    International Nuclear Information System (INIS)

    Systems for the removal of radioactive iodine and organic iodides have used impregnated coconut shell activated carbons almost exclusively. Coconut shell carbons have some disadvantages: their geographical origin determines their trace chemical content; pore structures and impregnant effectiveness are highly dependent on activation and impregnation techniques. The authors report laboratory performance of a group of iodine-organic iodide adsorbers using bases other than coconut shell carbon. These have been evaluated in conformity with USAEC Regulatory Guide 1.52 and RDT M16 1T. Performance with regard to 131I2 and CH3131I penetration and high-temperature elution have equaled or exceeded both the requirements of Guide 1.52 and results on typical coconut-shell carbons. Some performance outside Guide 1.52 ranges is included. Experimental problems in simulated LOCA testing are discussed. (U.S.)

  20. A mercuric ensemble based on a cycloruthenated complex as a visual probe for iodide in aqueous solution

    Science.gov (United States)

    Su, Xianlong; Guo, Lieping; Ma, Yajuan; Li, Xianghong

    2016-01-01

    A new water-soluble cycloruthenated complex Ru(bthiq)(dcbpy)2+ (1, Hbthiq = 1-(2-benzo[b]thiophenyl)isoquinoline, dcbpy = 4,4‧-dicarboxylate-2,2‧-bipyridine) was designed and synthesized to form its mercuric ensemble (1-Hg2+) to achieve visual detection of iodide anions. The binding constant of 1-Hg2+ is calculated to be 2.40 × 104 M-1, which is lower than that of HgI2. Therefore, the addition of I- to the aqueous solution of 1-Hg2+lead to significant color changes from yellow to deep-red by the release of 1. The results showed that iodide anions could be easily detected by the naked eyes. The detection limit of iodide anion is calculated as 0.77 μM. In addition, an easily-prepared test strip of 1-Hg2+ was obtained successfully to detect iodide anions.

  1. Palladium- and copper-mediated N-aryl bond formation reactions for the synthesis of biological active compounds

    Directory of Open Access Journals (Sweden)

    Burkhard Koenig

    2011-01-01

    Full Text Available N-Arylated aliphatic and aromatic amines are important substituents in many biologically active compounds. In the last few years, transition-metal-mediated N-aryl bond formation has become a standard procedure for the introduction of amines into aromatic systems. While N-arylation of simple aromatic halides by simple amines works with many of the described methods in high yield, the reactions may require detailed optimization if applied to the synthesis of complex molecules with additional functional groups, such as natural products or drugs. We discuss and compare in this review the three main N-arylation methods in their application to the synthesis of biologically active compounds: Palladium-catalysed Buchwald–Hartwig-type reactions, copper-mediated Ullmann-type and Chan–Lam-type N-arylation reactions. The discussed examples show that palladium-catalysed reactions are favoured for large-scale applications and tolerate sterically demanding substituents on the coupling partners better than Chan–Lam reactions. Chan–Lam N-arylations are particularly mild and do not require additional ligands, which facilitates the work-up. However, reaction times can be very long. Ullmann- and Buchwald–Hartwig-type methods have been used in intramolecular reactions, giving access to complex ring structures. All three N-arylation methods have specific advantages and disadvantages that should be considered when selecting the reaction conditions for a desired C–N bond formation in the course of a total synthesis or drug synthesis.

  2. Furnace design for the mercuric iodide crystal growth for new semiconductor radiation detector

    International Nuclear Information System (INIS)

    Mercuric iodide has been attracted an interest for 40 years due to its efficiency as room temperature detector for X and γ-rays. It is worthy to note that commercial γ-ray detectors such as Ge semiconductor detectors should cool down to liquid nitrogen temperature. Compared to other semiconductor detectors such as CdZnTe and CdTe, mercuric iodide has higher efficiency, lower leakage current and less degradation. In addition, mercuric iodide has useful properties such as large band gap of 2.15 eV, low electron-hole pair creation energy of 4.2 eV, and high atomic number (Hg : 80 and I : 53). However, it is difficult to obtain high quality single crystals and the long term reliability problem in devices so that the applications of α-HgI2 are limited. Mercuric iodide undergoes a structural phase transition from an orthorhombic yellow phase (β-HgI2) to a tetragonal red phase (α-HgI2) at 127 .deg. C. In addition, the melting temperature of HgI2 is 259 .deg. C. Thus, when it grows through a melting method over 259 .deg. C, the β-HgI2 phase can be included in the final crystals in the room temperature. In general, in order to grow α-HgI2single crystals, the operating temperature is below 127 .deg. C. Note that the crystals from the solution method have contamination problems and the crystals from the physical vapor method usually display a higher quality with a well defined structure. A good thing for the physical vapor method is that α-HgI2 has high vapor pressure (∼0.1 Torr at 120 .deg. C) indicating that α-HgI2 can be grown in closed ampoules

  3. Use of potassium iodide in Dermatology: updates on an old drug*

    OpenAIRE

    Costa, Rosane Orofino; de Macedo, Priscila Marques; Carvalhal, Aline; Bernardes-Engemann, Andréa Reis

    2013-01-01

    Potassium iodide, as a saturated solution, is a valuable drug in the dermatologist's therapeutic arsenal and is useful for the treatment of different diseases due to its immunomodulatory features. However, its prescription has become increasingly less frequent in dermatology practice. Little knowledge about its exact mechanism of action, lack of interest from the pharmaceutical industry, the advent of new drugs, and the toxicity caused by the use of high doses of the drug are some possible ex...

  4. Studies on Aryl-Substituted Phenylalanines: Synthesis, Activity, and Different Binding Modes at AMPA Receptors

    DEFF Research Database (Denmark)

    Szymanska, Ewa; Frydenvang, Karla Andrea; Pickering, Darryl S;

    2016-01-01

    A series of racemic aryl-substituted phenylalanines was synthesized and evaluated in vitro at recombinant rat GluA1−3, at GluK1−3, and at native AMPA receptors. The individual enantiomers of two target compounds, (RS)-2-amino-3-(3,4-dichloro-5-(5-hydroxypyridin-3-yl)phenyl)- propanoic acid (37...

  5. Magnetic Silica Supported Copper: A Modular Approach to Aqueous Ullmann-type Amination of Aryl Halides

    Science.gov (United States)

    One-pot synthesis of magnetic silica supported copper catalyst has been described via in situ generated magnetic silica (Fe3O4@SiO2); the catalyst can be used for the efficacious amination of aryl halides in aqueous medium under microwave irradiation.

  6. Efficient and Simple Synthesis of 6-Aryl-1,4-dimethyl-9H-carbazoles

    Directory of Open Access Journals (Sweden)

    Sylvain Rault

    2008-06-01

    Full Text Available A synthetic method for the preparation of 6-aryl-1,4-dimethyl-9H-carbazoles involving a palladium catalyzed coupling reaction of 1,4-dimethyl-9H-carbazole-6-boronic acids and (heteroaryl halides is described.

  7. Amination of Aryl Halides and Esters Using Intensified Continuous Flow Processing

    OpenAIRE

    Thomas M. Kohl; Christian H. Hornung; John Tsanaktsidis

    2015-01-01

    Significant process intensification of the amination reactions of aryl halides and esters has been demonstrated using continuous flow processing. Using this technology traditionally difficult amination reactions have been performed safely at elevated temperatures. These reactions were successfully conducted on laboratory scale coil reactor modules with 1 mm internal diameter (ID) and on a preparatory scale tubular reactor with 6 mm ID containing static mixers.

  8. Synthesis of a Crushed Fullerene C60H24 through Sixfold Palladium‐Catalyzed Arylation

    Science.gov (United States)

    Dorel, Ruth; de Mendoza, Paula; Calleja, Pilar; Pascual, Sergio; González‐Cantalapiedra, Esther; Cabello, Noemí

    2016-01-01

    The synthesis of a new C 3v‐symmetric crushed fullerene C60H24 (5) has been accomplished in three steps from truxene through sixfold palladium‐catalyzed intramolecular arylation of a syn‐trialkylated truxene precursor. Laser irradiation of 5 induces cyclodehydrogenation processes that result in the formation of C60, as detected by LDI‐MS.

  9. Inhibition of mucin glycosylation by aryl-N-acetyl-alpha-galactosaminides in human colon cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Kuan, S.F.; Byrd, J.C.; Basbaum, C.; Kim, Y.S. (Veterans Administration Medical Center, San Francisco, CA (USA))

    1989-11-15

    Specific inhibitors of the glycosylation of O-glycosidically linked glycoproteins have not previously been described. When tested for their effects on mucin glycosylation in a mucin-producing colon cancer cell line, LS174T, benzyl-, phenyl-, and p-nitrophenyl-N-acetyl-alpha-galactosaminide inhibited the formation of fully glycosylated mucin in a dose-dependent manner. Free aryl-oligosaccharides were found in the medium of treated cells labeled with ({sup 3}H)glucosamine, ({sup 3}H)galactose, ({sup 3}H)fucose, ({sup 3}H)mannosamine, or phenyl-alpha-(6-{sup 3}H) N-acetylgalactosamine. UDP-Gal:GalNAc-beta 1,3-galactosyltransferase was inhibited by aryl-N-acetyl-alpha-galactosaminides but not by a number of other aryl-glycosides. Treatment with these inhibitors also causes reversible morphologic changes including formation of intercellular cysts. Aryl-N-acetyl-alpha-galactosaminides can be useful for the structural and functional studies of mucin macromolecules and other O-linked glycoproteins.

  10. Magnetic silica supported palladium catalyst: synthesis of allyl aryl ethers in water

    Science.gov (United States)

    A simple and benign procedure for the synthesis of aryl allyl ethers has been developed using phenols, allyl acetates and magnetically recyclable silica supported palladium catalyst in water; performance of reaction in air and easy separation of the catalyst using an external mag...

  11. Palladium-Catalyzed Carbonylation of Aryl Bromides with N-Substituted Cyanamides

    DEFF Research Database (Denmark)

    Lian, Zhong; Friis, Stig D.; Lindhardt, Anders T.;

    2014-01-01

    The palladium(0)-catalyzed three-component coupling reaction of aryl bromides, carbon monoxide, and N-alkyl cyan­amides has been developed employing a two-chamber system with ex situ generation of carbon monoxide from a silacarboxylic acid. The reactions proceeded well and were complete with a...

  12. Mild Pd-catalyzed aminocarbonylation of (hetero)aryl bromides with a palladacycle precatalyst.

    Science.gov (United States)

    Friis, Stig D; Skrydstrup, Troels; Buchwald, Stephen L

    2014-08-15

    A palladacyclic precatalyst is employed to cleanly generate a highly active XantPhos-ligated Pd-catalyst. Its use in low temperature aminocarbonylations of (hetero)aryl bromides provides access to a range of challenging products in good to excellent yields with low catalyst loading and only a slight excess of CO. Some products are unattainable by traditional carbonylative coupling.

  13. Arylative Desulfonation of Diarylmethyl Phenyl Sulfone with Arenes Catalyzed by Scandium Triflate.

    Science.gov (United States)

    Nambo, Masakazu; Ariki, Zachary T; Canseco-Gonzalez, Daniel; Beattie, D Dawson; Crudden, Cathleen M

    2016-05-20

    A scandium-triflate-catalyzed arylative desulfonation of diarylmethyl phenyl sulfones with arenes and heteroarenes was established. A variety of both sulfone and arene substrates were reacted to afford symmetric and nonsymmetric triarylmethanes in good yields. Further transformations of the resulting triarylmethanes and application to the concise synthesis of a bactericidal agent analogue were also demonstrated. PMID:27124389

  14. Palladium-catalyzed Coupling between Aryl Halides and Trimethylsilylacetylene Assisted by Dimethylaminotrimethyltin

    Institute of Scientific and Technical Information of China (English)

    Cai Liangzhen; Yang Dujuan; Sun Zhonghua; Tao Xiaochun; Cai Lisheng; Pike Victor W

    2011-01-01

    Palladium-catalyzed coupling between aryl halides, especially less reactive ones or N-heteroaryls, and trimethylsilylacetylene in the presence of dimethylaminotrimethyltin generated the coupled products in high yields. The reaction does not need CuI and base as auxiliary agents.

  15. Smoke carcinogens cause bone loss through the aryl hydrocarbon receptor and induction of CYP1 enzymes

    Science.gov (United States)

    Smoking is a major risk factor for osteoporosis and fracture. Here, we show that smoke toxins and environmental chemicals such as benzo[a]pyrene (BaP), 2,3,7,8-tetrachlorodibenzo-pdioxin (TCDD), and 3-methyl cholanthrene, which are well known aryl hydrocarbon receptor (AHR) agonists, induce osteocla...

  16. Palladium-catalyzed carbonylative sonogashira coupling of aryl bromides using near stoichiometric carbon monoxide

    DEFF Research Database (Denmark)

    Neumann, Karoline T.; Laursen, Simon R.; Lindhardt, Anders T.;

    2014-01-01

    A general procedure for the palladium-catalyzed carbonylative Sonogashira coupling of aryl bromides is reported, using near stoichiometric amounts of carbon monoxide. The method allows a broad substrate scope in moderate to excellent yields. The formed alkynone motive serves as a platform for...

  17. An Efficient Solid-State Synthesis of N-Aryl-2-phenyldiazenecarboxamides

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new and efficient solid-state reaction using K3Fe(CN)6/KOH to oxidize diaryl semicarbazides for preparing azo compounds has been reported. Nine N-aryl-2-phenyl-diazenecarboxamides have been synthesized in excellent yields with simple instrument.

  18. Brominated thiophenes as precursors in the preparation of brominated and arylated anthraquinones.

    Science.gov (United States)

    Thiemann, Thies; Tanaka, Yasuko; Iniesta, Jesus

    2009-01-01

    Brominated anthraquinones can be synthesized directly from bromothiophenes when these are reacted with 1,4-naphthoquinones in the presence of meta-chloroperoxybenzoic acid. The bromoanthraquinones are versatile building blocks in the preparation of arylated anthraquinones and of extended pi-systems with interspersed anthraquinone units. PMID:19305356

  19. Brominated Thiophenes as Precursors in the Preparation of Brominated and Arylated Anthraquinones

    Directory of Open Access Journals (Sweden)

    Thies Thiemann

    2009-03-01

    Full Text Available Brominated anthraquinones can be synthesized directly from bromothiophenes when these are reacted with 1,4-naphthoquinones in the presence of meta-chloroperoxybenzoic acid. The bromoanthraquinones are versatile building blocks in the preparation of arylated anthraquinones and of extended π-systems with interspersed anthraquinone units.

  20. Brominated Thiophenes as Precursors in the Preparation of Brominated and Arylated Anthraquinones

    OpenAIRE

    Thies Thiemann; Jesus Iniesta; Yasuko Tanaka

    2009-01-01

    Brominated anthraquinones can be synthesized directly from bromothiophenes when these are reacted with 1,4-naphthoquinones in the presence of meta-chloroperoxybenzoic acid. The bromoanthraquinones are versatile building blocks in the preparation of arylated anthraquinones and of extended π-systems with interspersed anthraquinone units.

  1. Trapping Reactive Intermediates by Mechanochemistry: Elusive Aryl N-Thiocarbamoylbenzotriazoles as Bench-Stable Reagents.

    Science.gov (United States)

    Štrukil, Vjekoslav; Gracin, Davor; Magdysyuk, Oxana V; Dinnebier, Robert E; Friščić, Tomislav

    2015-07-13

    Monitoring of mechanochemical thiocarbamoylation by in situ Raman spectroscopy revealed the formation of aryl N-thiocarbamoylbenzotriazoles, reactive intermediates deemed unisolable in solution. The first-time isolation and structural characterization of these elusive molecules demonstrates the ability of mechanochemistry to access otherwise unobtainable intermediates and offers a new range of masked isothiocyanate reagents.

  2. Suzuki-Miyaura cross-coupling of potassium dioxolanylethyltrifluoroborate and aryl/heteroaryl chlorides.

    Science.gov (United States)

    Fleury-Brégeot, Nicolas; Oehlrich, Daniel; Rombouts, Frederik; Molander, Gary A

    2013-04-01

    A robust and efficient protocol for the introduction of the dioxolanylethyl moiety onto various aryl and heteroaryl halides has been developed, providing cross-coupling yields up to 93%. Copper-catalyzed borylation of 2-(2-bromoethyl)-1,3-dioxolane with bis(pinacolato)diboron followed by treatment with potassium bifluoride provides the key organotrifluoroborate reagent.

  3. Gold-Catalyzed Direct Assembly of Aryl-Annulated Carbazoles from 2-Alkynyl Arylazides and Alkynes.

    Science.gov (United States)

    Li, Nan; Lian, Xiao-Lei; Li, Yu-Hui; Wang, Tian-Yi; Han, Zhi-Yong; Zhang, Liming; Gong, Liu-Zhu

    2016-09-01

    An unprecedented gold-catalyzed synthetic method for the direct assembly of aryl-annulated carbazoles from 2-alkynyl arylazides and alkynes is described. The reaction is proposed to proceed via a sequential cyclopropenation and intramolecular metal carbene/arene Friedel-Crafts-type reaction, respectively, mediated by two gold carbene intermediates. PMID:27529360

  4. Synthesis and Pregnancy Terminating Activity of 2-Aryl imidazo [2,1-a] isoquinolines

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Two 2-aryl imidazo [2,1-a] isoquinolines were synthesized and tested for pregnancy terminating activities. Both of them are new compounds and their structures were confirmed by IR, 1HNMR, MS and elemental analysis. They both showed high activities in NIH mice.

  5. A General and Efficient CuBr2-Catalyzed N-Arylation of Secondary Acyclic Amides

    Institute of Scientific and Technical Information of China (English)

    王满刚; 于华; 尤心稳; 吴军; 商志才

    2012-01-01

    A general and efficient Cu(II)-catalyzed cross-coupling method is reported for the preparation of acyclic tertiary amides. Generally moderate to excellent yields and functional group tolerance were obtained with secondary acyclic amides and aryl halides as substrates in toluene.

  6. Spectral and catalytic properties of aryl-alcohol oxidase, a fungal flavoenzyme acting on polyunsaturated alcohols

    NARCIS (Netherlands)

    Ferreira, P.; Medina, M.; Guillén, F.; Martínez, M.J.; Berkel, van W.J.H.; Martínez, A.T.

    2005-01-01

    Spectral and catalytic properties of the flavoenzyme AAO (aryl-alcohol oxidase) from Pleurotus eryngii were investigated using recombinant enzyme. Unlike most flavoprotein oxidases, AAO does not thermodynamically stabilize a flavin semiquinone radical and forms no sulphite adduct. AAO catalyses the

  7. Arylation of Acrylamide and Acrylonitrile with Arenediazonium Salts Catalyzed by Palladium Acetate

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Arylation of acrylamide and acrylonitrile were carried out with various arenediazonium tetrafluoroborates in the presence of a catalytic amount of Pd(OAc)2 in ethanol and a variety of substituted (E)-cinnamamides and (E)-cinnamonitriles were obtained in high yields under mild reaction conditions.

  8. N-Unsubstituted and N-Arylated Fulleropyrrolidines: New Useful Building Blocks for C60 Functionalization

    Institute of Scientific and Technical Information of China (English)

    TONG,Chen-Hua; WU,Zong-Quan; HOU,Jun-Li; LI,Zhan-Ting

    2006-01-01

    Two series of stable and soluble fulleropyrrolidines have been prepared from the reactions of C60, glycine or its N-arylated derivatives and aliphatic aldehydes or ketones in refluxing toluene or chlorobenzene. The new C60 derivatives represent new useful building blocks for further preparation of more funcionalized C60 derivatives.

  9. Nitro-Grela-type complexes containing iodides - robust and selective catalysts for olefin metathesis under challenging conditions.

    Science.gov (United States)

    Tracz, Andrzej; Matczak, Mateusz; Urbaniak, Katarzyna; Skowerski, Krzysztof

    2015-01-01

    Iodide-containing nitro-Grela-type catalysts have been synthesized and applied to ring closing metathesis (RCM) and cross metathesis (CM) reactions. These new catalysts have exhibited improved efficiency in the transformation of sterically, non-demanding alkenes. Additional steric hindrance in the vicinity of ruthenium related to the presence of iodides ensures enhanced catalyst stability. The benefits are most apparent under challenging conditions, such as very low reaction concentrations, protic solvents or with the occurrence of impurities. PMID:26664602

  10. Peroxide effects of iodide excess on mitochondria in Fischer rat thyroid cell line in the early period

    Institute of Scientific and Technical Information of China (English)

    李敏

    2014-01-01

    Objective To investigate the peroxide effects of iodide excess on mitochondria in Fischer rat thyroid cell line(FRTL)in the early period.Methods After treatment with 0.0 mmol/L(control group)or 0.1 mmol/L potassium iodide(KI)for 2,4 and 24 h,respectively,changes of mitochondrial superoxide formation were assayed by flow cytometry and fluorescence microscopy using mitochondria-targeted hydroethidine(Mito SOX).

  11. Chlorine Dioxide-Iodide-Methyl Acetoacetate Oscillation Reaction Investigated by UV-Vis and Online FTIR Spectrophotometric Method

    OpenAIRE

    Laishun Shi; Xiaomei Wang; Na Li; Jie Liu; Chunying Yan

    2012-01-01

    In order to study the chemical oscillatory behavior and mechanism of a new chlorine dioxide-iodide ion-methyl acetoacetate reaction system, a series of experiments were done by using UV-Vis and online FTIR spectrophotometric method. The initial concentrations of methyl acetoacetate, chlorine dioxide, potassium iodide, and sulfuric acid and the pH value have great influence on the oscillation observed at wavelength of 289 nm. There is a preoscillatory or induction period, and the amplitude and...

  12. Nitro-Grela-type complexes containing iodides – robust and selective catalysts for olefin metathesis under challenging conditions

    Directory of Open Access Journals (Sweden)

    Andrzej Tracz

    2015-10-01

    Full Text Available Iodide-containing nitro-Grela-type catalysts have been synthesized and applied to ring closing metathesis (RCM and cross metathesis (CM reactions. These new catalysts have exhibited improved efficiency in the transformation of sterically, non-demanding alkenes. Additional steric hindrance in the vicinity of ruthenium related to the presence of iodides ensures enhanced catalyst stability. The benefits are most apparent under challenging conditions, such as very low reaction concentrations, protic solvents or with the occurrence of impurities.

  13. Nitro-Grela-type complexes containing iodides – robust and selective catalysts for olefin metathesis under challenging conditions

    Science.gov (United States)

    Tracz, Andrzej; Matczak, Mateusz; Urbaniak, Katarzyna

    2015-01-01

    Summary Iodide-containing nitro-Grela-type catalysts have been synthesized and applied to ring closing metathesis (RCM) and cross metathesis (CM) reactions. These new catalysts have exhibited improved efficiency in the transformation of sterically, non-demanding alkenes. Additional steric hindrance in the vicinity of ruthenium related to the presence of iodides ensures enhanced catalyst stability. The benefits are most apparent under challenging conditions, such as very low reaction concentrations, protic solvents or with the occurrence of impurities. PMID:26664602

  14. Nitro-Grela-type complexes containing iodides - robust and selective catalysts for olefin metathesis under challenging conditions.

    Science.gov (United States)

    Tracz, Andrzej; Matczak, Mateusz; Urbaniak, Katarzyna; Skowerski, Krzysztof

    2015-01-01

    Iodide-containing nitro-Grela-type catalysts have been synthesized and applied to ring closing metathesis (RCM) and cross metathesis (CM) reactions. These new catalysts have exhibited improved efficiency in the transformation of sterically, non-demanding alkenes. Additional steric hindrance in the vicinity of ruthenium related to the presence of iodides ensures enhanced catalyst stability. The benefits are most apparent under challenging conditions, such as very low reaction concentrations, protic solvents or with the occurrence of impurities.

  15. Determination of microamounts of potassium in sodium iodide by atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Microdetermination of potassium in sodium iodide was developed by the standard addition method. Twenty grams of sample were dissolved in 50 ml of water in a quartz beaker. To the solution, 30 ml of concentrated hydrochloric acid and 30 ml of 30% hydrogen peroxide were added, and evaporated to dryness. By this process sodium iodide was converted into sodium chloride. The cake thus obtained was dissolved in water and diluted to exactly 200 ml. To 25 ml aliquots of the solution, the standard potassium and cesium chloride solutions were added and diluted to 50 ml with water; the concentration of potassium was 0 -- 1 mg/l and that of cesium 4 mM. These solutions were introduced into an air-propane flame and the absorbances were measured at 769.9 nm. During the conversion reaction, hydrochloric acid was completely decomposed, and remained hydrogen peroxide had no influence for absorbance, and other backgrounds were negligible. The linear calibration curve was obtained in the range 0 -- 2 mg of potassium per liter. Potassium in sodium iodide was determined by this method within the coefficient of variation of +-(20 -- 3)% in the range (1.7 -- 32.5) ppm. (author)

  16. Iodide Sorption to Clays and the Relationship to Surface Charge and Clay Texture - 12356

    International Nuclear Information System (INIS)

    Iodine is assumed to behave conservatively in clay barriers around nuclear waste repositories and in natural sediments. Batch experiments tend to show little to no sorption, while in column experiments iodine is often retarded relative to tritiated water. Current surface complexation theory cannot account for negatively charged ion sorption to a negatively charged clay particle. Surface protonation and iodide sorption to clay minerals were examined using surface titrations and batch sorption experiments with a suite of clay minerals. Surface titrations were completed spanning a range of both pH values and ionic strengths. For reference, similar titrations were performed on pure forms of an Al-O powder. The titration curves were deconvoluted to attain the pKa distribution for each material at each ionic strength. The pKa distribution for the Al-O shows two distinct peaks at 4.8 and 7.5, which are invariant with ionic strength. The pKa distribution of clays was highly variable between the different minerals and as a function of ionic strength. Iodide sorption experiments were completed at high solid:solution ratios to exacerbate sorption properties. Palygorskite and kaolinite had the highest amount of iodide sorption and montmorillonite had the least. (authors)

  17. Study on multiphoton ionization dissociation processes of ethyl iodide at 800 nm laser radiation

    International Nuclear Information System (INIS)

    Multiphoton ionization-dissociation (MPID) process of ethyl iodide are studied at 800 nm femto-second laser, and time-of-flight mass spectrometer of ethyl iodide are obtained. The result of laser power index shows that the parent-ion mainly undergoes the 3 + 3 resonant enhanced multiphoton ionization (REMPI) process. The percentage of part fragment ions to the total ion current and the laser intensity dependence of the molecule are measured. Based on the experiment results, the multiphoton ionization- dissociation mechanism of ethyl iodide is discussed. The conclusion is that most of ion fragments are produced by C2H5I+ dissociation, this is consistent with the parent-ion dissociation staircase. The two possible dissociation channels of parent-ion are analyzed, but the C-I dissociation is the main channel. We also use Gaussian 03 calculated the energy change of the two channels with B3LYP/3-21G basis set, the theoretical results further demonstrated the experiment. (authors)

  18. Radiofrequency induction on sodium/iodide symporter expression of thyroid cancer

    Institute of Scientific and Technical Information of China (English)

    Youxin Tian; Qinjiang Liu; Yaqiong Ni

    2013-01-01

    Objective:The aim of this study was to investigate the ef ects of radiofrequency treatment on sodium/iodide symporter expression of thyroid cancer cells. Methods:In 29 thyroid cancer patients with low or no expression of soda\\iodide symporter, the radio frequency combined 131I therapy was used, the whole-body scintigraphy and serum Ig were detected before and after the radiofrequency treatment. Results:The whole-body scintigraphy showed that 4 cases (4/29) before radiofrequency treatment had positive iodine uptake, 19 cases (19/29) two weeks after radiofrequency treatment had the positive iodine uptake, 12 cases (12/29) four weeks after radiofrequency treatment had the positive iodine uptake. Four weeks after radiofrequency treatment, 5 cases had increased serum Ig levels, 17 cases had decreased serum Ig levels, 7 cases showed no change. 25 cases (25/29) were ef ective, 15 cases (15/29) were cured. Conclusion:The radiofrequency induced the non-expressed the sodium/iodide symporter of thyroid cancer cells regain the iodine intake ability, it improved the clinical ef icacy of 131I therapy in dedif erentiated thyroid cancer.

  19. Toxic impact of bromide and iodide on drinking water disinfected with chlorine or chloramines.

    Science.gov (United States)

    Yang, Yang; Komaki, Yukako; Kimura, Susana Y; Hu, Hong-Ying; Wagner, Elizabeth D; Mariñas, Benito J; Plewa, Michael J

    2014-10-21

    Disinfectants inactivate pathogens in source water; however, they also react with organic matter and bromide/iodide to form disinfection byproducts (DBPs). Although only a few DBP classes have been systematically analyzed for toxicity, iodinated and brominated DBPs tend to be the most toxic. The objectives of this research were (1) to determine if monochloramine (NH2Cl) disinfection generated drinking water with less toxicity than water disinfected with free chlorine (HOCl) and (2) to determine the impact of added bromide and iodide in conjunction with HOCl or NH2Cl disinfection on mammalian cell cytotoxicity and genomic DNA damage induction. Water disinfected with chlorine was less cytotoxic but more genotoxic than water disinfected with chloramine. For both disinfectants, the addition of Br(-) and I(-) increased cytotoxicity and genotoxicity with a greater response observed with NH2Cl disinfection. Both cytotoxicity and genotoxicity were highly correlated with TOBr and TOI. However, toxicity was weakly and inversely correlated with TOCl. Thus, the forcing agents for cytotoxicity and genotoxicity were the generation of brominated and iodinated DBPs rather than the formation of chlorinated DBPs. Disinfection practices need careful consideration especially when using source waters containing elevated bromide and iodide.

  20. Simple and rapid determination of iodide in table salt by stripping potentiometry at a carbon-paste electrode.

    Science.gov (United States)

    Svancara, Ivan; Ogorevc, Bozidar; Nović, Milko; Vytras, Karel

    2002-04-01

    A simple and rapid procedure, utilising constant-current stripping analysis (CCSA) at a carbon-paste electrode containing tricresyl phosphate as a pasting liquid (TCP-CPE), has been developed for the determination of iodide in table salt. Because of a synergistic accumulation mechanism based on ion-pairing and extraction of iodide in combination with electrolytic pretreatment of the TCP-CPE, the method is selective for iodide and enables direct determination of iodide in samples of table salt containing anti-caking agents such as K(4)[Fe(CN)(6)] (food additive "E 536") or MgO. The iodide content (calculated as KI) can be determined in a concentration range of 2 to 100 mg kg(-1) salt, with a detection limit (S/N=3) of 1 mg kg(-1), and a recovery from 90 to 115%. The proposed method has been used to determine iodide in several types of artificially iodised table salt and in one sample of natural sea salt. The results obtained agreed well with those obtained by use of three independent reference methods (titration, spectrophotometry, and ICP-MS) used to validate the CCSA method, indicating that the developed method is applicable as a routine procedure for rapid testing in salt production process control and in the analysis of marketed table salts.

  1. Pd(OAc)2/DPPF-catalysed microwave-assisted cyanide-free synthesis of aryl nitriles

    Indian Academy of Sciences (India)

    Dinesh N Sawant; Bhalchandra M Bhanage

    2014-03-01

    This study reports microwave-assisted cyanide-free synthesis of aryl nitriles from aryl halides using palladium acetate/1,1-bis(diphenylphosphino)ferrocene as a new catalyst system. Reported protocol is a rapid, cyanide-free, single step reaction, wherein formamide acts as a solvent as well as a source of cyanide. The use of microwave increases the rate of reaction substantially and it was observed that aryl nitriles can be synthesised in 50 min of microwave irradiation compared to conventional thermal heating protocol which requires 48 h.

  2. Catalytic, Interrupted Formal Homo-Nazarov Cyclization with (Hetero)arenes: Access to α-(Hetero)aryl Cyclohexanones.

    Science.gov (United States)

    Williams, Corey W; Shenje, Raynold; France, Stefan

    2016-09-16

    The first examples of a Lewis-acid catalyzed (hetero)arene interrupted, formal homo-Nazarov cyclization have been disclosed. Using SnCl4 as the catalyst, alkenyl cyclopropyl ketones undergo ring-opening cyclization to form six-membered cyclic oxyallyl cations. Subsequent intermolecular Friedel-Crafts-type arylation with various electron-rich arenes and heteroarenes provides functionalized α-(hetero)arylated cyclohexanones, a scaffold present in many natural products and bioactive compounds, in yields up to 88% and diastereomeric ratios up to 12:1. Regiospecific arylation occurs at the α-carbon of the oxyallyl cation due to polarization caused by the ester group. PMID:27529123

  3. Iridium(iii)-catalyzed regioselective direct arylation of sp(2) C-H bonds with diaryliodonium salts.

    Science.gov (United States)

    Gao, Pan; Liu, Li; Shi, Zhuangzhi; Yuan, Yu

    2016-08-01

    A regioselective direct arylation of arenes and olefins at the ortho position is reported. The key to the high selectivity is the appropriate choice of diaryliodonium salts as the arylating reagent in the presence of a cationic iridium(iii) catalyst. The coordination of the metal with an oxygen atom or a nitrogen atom and subsequent C-H activation allows for direct arylation with coupling partners. This reaction proceeds under mild reaction conditions and with a high tolerance of various functional groups including many halide functional groups. PMID:27381238

  4. Consumers, food and convenience: The long way from resource constraints to actual consumption patterns

    DEFF Research Database (Denmark)

    Scholderer, Joachim; Grunert, Klaus G.

    2005-01-01

    Two theoretical frameworks have been used in previous research to explain consumers' interest in effort-saving activities in the context of meal production: the household production approach and the convenience orientation approach. A model is developed that synthesizes both approaches, assuming...

  5. A convenient procedure for the synthesis of allyl and benzyl ethers from alcohols and phenols

    Indian Academy of Sciences (India)

    H Surya Prakash Rao; S P Senthilkumar

    2001-06-01

    Allyl and benzyl ethers of alcohols can be prepared conveniently and in high yield with allyl and benzyl bromide in the presence of solid potassium hydroxide without use of any solvent. Phenols can be converted to allyl ethers but are inert to benzylation under above conditions.

  6. Perceptions of the health and convenience characteristics of fresh and driedfruits

    NARCIS (Netherlands)

    Sijtsema, S.J.; Jesionkowska, K.; Symoneaux, R.; Konopacka, D.; Snoek, H.M.

    2012-01-01

    Dried fruits consumption has not received much research attention, although these foods are associated with potential health benefits. Therefore, the aim of this study was to compare fresh fruits and dried fruits on measures of health, convenience and consumer feelings. An on-line questionnaire that

  7. The Prevalence of Gambling in College: A Review of Literature, Convenience Sample, and Recommendations

    Science.gov (United States)

    Seifried, Chad; Krenzelok, Ann; Turner, Brian A.; Brett, Martin

    2009-01-01

    This project examined the level of gambling exhibited by a convenience sample of 155 college students at a large Midwestern university and compared it to previously completed work. The researchers found most college student gamblers engaged in the most popular form of gambling like casino games, card games, and betting pools for money. Gambling on…

  8. Students' Dependence on Smart Phones: The Influence of Social Needs, Social Influences and Convenience

    Science.gov (United States)

    Suki, Norazah Mohd

    2013-01-01

    Purpose: The purpose of this paper is to assess whether social needs, social influences and convenience of smart phones affects students' dependence on them. This research also examines whether students' dependence on smart phones influences their purchase behaviour. This investigation is conducted among the students in a public university in the…

  9. Novel and Convenient Approach to Synthesis of AZT/d4T H-phosphonates

    Institute of Scientific and Technical Information of China (English)

    LIN, Chang-Xue(林长学); FU, Hua(付华); TU, Guang-Zhong(涂光忠); ZHAO, Yu-Fen(赵玉芬)

    2004-01-01

    A convenient, efficient and general method has been developed for synthesis of H-phosphonate mono and diesters of AZT and d4T through one-pot reaction of phosphonic acid with AZT or d4T and different alcohols using pivaloyl chloride as condensing agent under mild conditions.

  10. Effect of consumers' ethic perceptions to convenience perceptions and purchasing intention in online stores

    OpenAIRE

    Orpana, Mari

    2015-01-01

    Objectives: The main objective of this thesis is to gain knowledge of how consumers' perceptions regarding the ethics of online retailers affect to consumers' online shopping attitudes, more specifically consumers' perceptions of online shopping convenience. Also ambition is to achieve deeper knowledge about consumer behaviour and especially consumers' perceptions towards online retailers. Besides connection between consumers' perceptions regarding the ethics of online retailers and ...

  11. A convenient synthesis of ezetimibe analogs as cholesterol ab sorption inhibitors

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A convenient method for the synthesis of ezetimibe analogs as cholesterol absorption inhibitors was described.The key step in the synthesis was the intramolecular ring formation through Mitsunobu reaction.Furthermore,a new series of analogs was designed and synthesized.

  12. Ultrasound-promoted clean synthesis of 1-thiocarbamoyl-3-(2-hydroxyphenyl-5-aryl-4,5-dihydro-1H-pyrazoles

    Directory of Open Access Journals (Sweden)

    Israel Leite Bogarim Jr.

    2012-06-01

    Full Text Available of important biological and pharmaceutical activities. In recent years, we described the synthesis of many heterocycles by non-traditional conditions, such as microwaves and ultrasound. In particular, the beneficial effects of ultrasonic irradiation are playing an increasing role in process chemistry, especially in cases where classical methods require drastic conditions or prolonged reaction times. These observations and our interest in clean production of heterocyclic compounds prompted us to apply ultrasound in the preparation of 1-thiocarbamoyl-3-(2-hydroxyphenyl-5-aryl-4,5-dihydro-1H-pyrazoles. The best condition for preparing the target pyrazoles (5a-c was achieved when two equivalents of both KOH and thiosemicarbazide and 1 equivalent of the chalcones/flavanones (3,4a-c were sonicated for 30 minutes, affording the desired pure product in good yield (Scheme. In conclusion, we have developed a mild, convenient and environmentally friendly protocol for the preparation of target compounds under ultrasonic irradiation. Significant advantages of the method include the fact that: (i the reaction is simple to execute; (ii the products are isolated in good yields (61-76%; (iii the work-up is very simple and (iv the reaction time is short (30 min.

  13. Reduction of stimulated sodium iodide symporter expression by estrogen receptor ligands in breast cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Cheong, Su-Jin; Jang, DooRye; Jeong, Hwan-Jeong; Lim, Seok Tae; Sohn, Myung-Hee [Department of Nuclear Medicine, Cyclotron Research Center, Research Institute of Clinical Medicine, Chonbuk National University Medical School, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Katzenellenbogen, John A., E-mail: jkatzene@illinois.ed [Department of Chemistry, University of Illinois, Urbana, IL 61801 (United States); Kim, Dong Wook, E-mail: kimdw@chonbuk.ac.k [Department of Nuclear Medicine, Cyclotron Research Center, Research Institute of Clinical Medicine, Chonbuk National University Medical School, Jeonju, Jeonbuk 561-756 (Korea, Republic of)

    2011-02-15

    Purpose: The sodium iodide symporter (NIS) mediates active iodide uptake in lactating breast tissue, and when its levels are enhanced by all-trans retinoic acid (atRA), NIS has been proposed as a target for the imaging and radiotherapy of breast cancer. Importantly, the estrogen receptor {alpha} (ER{alpha}) is an important regulator of atRA induced NIS gene expression in breast cancer cells. In this study, we investigated the effect of an ER agonist (17{beta}-estradiol, E{sub 2}) or antagonist [trans-hydroxytamoxifen (TOT) or raloxifene (RAL)] treatment on the regulation of NIS gene expression and iodide uptake in an ER{alpha}-positive breast cancer (MCF-7) model. Methods: NIS functional activity was measured in vitro by {sup 125}I uptake assay after incubation with E{sub 2} (from 10{sup -15} to 10{sup -5} M), TOT (from 5x10{sup -8} to 5x10{sup -6} M), or RAL (from 5x10{sup -8} to 5x10{sup -6} M) in the presence or absence of atRA (10{sup -7} M). Under the same conditions, NIS mRNA expression was examined by reverse transcriptase polymerase chain reaction. Athymic mice with MCF-7 xenograft tumors were treated with atRA alone or atRA together with E{sub 2} to evaluate the change of {sup 125}I uptake in tumor tissues in vivo. Results: In the iodide uptake study in cells, E{sub 2}, TOT, or RAL treatment alone did not stimulate {sup 125}I uptake. However, when iodide uptake was stimulated by atRA, cotreatment with E{sub 2}, TOT or RAL decreased {sup 125}I uptake in a concentration-dependent manner. The hormone effects on NIS mRNA expression levels in MCF-7 cells were similar. The results of the in vivo biodistribution study showed that {sup 125}I uptake was reduced 50% in tumor tissues of mice treated with atRA/E{sub 2} as compared to tumors treated only with atRA. Conclusion: Our results suggest that combination treatment of atRA and ER ligands could limit the functional activity of the NIS gene induced by atRA, thereby compromising its use as a target for diagnosis

  14. Potential of irradiation technique for development of convenience foods in India

    International Nuclear Information System (INIS)

    Full text: One of the important applications of ionising radiation is in the processing and preservation of food articles. An enormous research effort has been directed towards biological testing of irradiated foods for the evaluation of their safety and wholesomeness. Food irradiation has demonstrated several safe technically and economically feasible applications. Radiation processing of foods has the potential to provide mankind with such benefits as elimination of toxic fumigants for insect disinfestation, extended shelf life for refrigerated products, elimination of food borne pathogens and parasites and to provide high quality packaged food with long shelf life at room temperature. Food irradiation has been legally permitted in India and regulation is in place for its commercialization and marketing of irradiated foods. Marked changes in the life style have significantly influenced the growth of convenience foods. Food irradiation is now considered as a safe process, so with increased demand for high quality convenience food, efforts are required to evaluate the effectiveness of irradiation in combination with other processing methods to enhance their safety and shelf life since convenience foods are here to stay and play an even more significant role in the market place in future. Notable progress has been made in many countries in the recent past in the application of low dose irradiation process as combination treatment, synergistically complimentarily. There is a great hope in accelerating the pace of progress in potential application of the irradiation processes to prevent food losses. In view of the sociological changes occurring at a fast pace in our society as well as increased industrialization there is an ample scope for the convenience and processed traditional foods. So with today's demand for high quality convenience foods it is high time that irradiation technology is considered evaluated and popularized for the same

  15. A Convenient Synthesis of Conjugated Acetylenic Ketones by Copper(l)-Catalyzed under Microwave Irradiation

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Alkynyl ketones are useful precursors and intermediates in synthetic organic chemistry1 and has evoked considerable interest. A number of methods for the synthesis of conjugated acetylenic ketones involve the reaction a metal acetylide with an acyl chlorides or another carboxylic acid derivative have been developed 2. Recently, the synthesis of α, β-conjugated acetylenic ketones catalyzed by Pd(Ⅱ) or by copper(Ⅰ)pd(Ⅱ) reaction of 1-alkynes and acyl chlorides have been described. The acylation of terminal alkynes by acyl chlorides in the presence of catalytic amounts copper(Ⅰ) salts leading to α, β-conjugated acetylenic ketones has also been reported. However, many of these reactions suffer from lack of high pressure (17 atm), long reaction time (30 h)and require low temperatures (-78℃). Our work involves the synthesis of conjugated acetylenic ketones via the reaction of terminal alkynes with aroyl chlorides in the presence of cuprous iodide under microwave irradiation conditions.

  16. Iodine Catalyzed Microwave-Assisted Synthesis of 14-Aryl(Alkyl)-14H-dibenzo[a,j]xanthenes

    Institute of Scientific and Technical Information of China (English)

    DING,Fei-Qing; AN,Li-Tao; ZOU,Jian-Ping

    2007-01-01

    A straightforward and effective procedure for the synthesis of 14-aryl(alkyl)-14H-dibenzo[a,j]xanthenes was described using a catalytic amount of molecular iodine under microwave irradiation to afford the corresponding xanthenes in good yields.

  17. A Simple and Highly Efficient Preparation of Structurally Diverse Aryl β-diketoacids as HIV-1 Integrase Inhibitors

    Institute of Scientific and Technical Information of China (English)

    JIANG Xiao-Hua姜晓华; LONG Ya-Qiu龙亚秋

    2004-01-01

    In order to provide a facile and practical access to structurally diverse aryl β-diketoacids, An improved and highly efficient oxalylation method was developed which employed commercially available and cheap reagents.The oxalylation of aryl methyl ketones, the key step to construct the pharmacophore of aryl β-diketoacids, was considerably facilitated by a new combination of dimethyl oxalate as an oxalic source and sodium tert-butoxide as a base. A wide variety of aryl β-diketoacids bearing different functional groups can be prepared rapidly in high yields at room t. emperature with this method, which has significant advantages over the previously reported procedures in a wider application range, much less amount of reagents, pretty higher yields and quite shorter reaction time. The bis-aryldiketoacids 3k and 31, readily prepared by this method, displayed interesting and promising inhibitory activities against HIV-1 integrase and HIV-1 replication in cells.

  18. Ceric Ammonium Nitrate-mediated Oxidative Cycloaddition of 1,3-Dicarbonyls to β-Aryl-α,β-unsaturated Ketones

    Institute of Scientific and Technical Information of China (English)

    Wei ZHANG; Cong De HUO; Zheng Gang LIU; Zhong Li LIU

    2004-01-01

    Regio and stereoselective synthesis of substituted dihydrofurans were accomplished by ceric ammonium nitrate mediated oxidative cycloaddition of 1,3-dicarbonyls to β-aryl-α,β-unsaturated ketones in moderate yields.

  19. An Efficient Synthesis of Diaryl Ethers by Coupling Aryl Halides with Substituted Phenoxytrimethylsilane in the Presence of TBAF

    Institute of Scientific and Technical Information of China (English)

    Jian Kui ZHAO; Yan Guang WANG

    2003-01-01

    A general synthesis of diaryl ethers via coupling of aryl halides with substitutedphenoxytrimethylsilane in the presence of TBAF is described. The protocol is simple and mild,and gives good to excellent yields.

  20. Asymmetric synthesis of gem-diaryl substituted cyclic sulfamidates and sulfamides by rhodium-catalyzed arylation of cyclic ketimines.

    Science.gov (United States)

    Nishimura, Takahiro; Ebe, Yusuke; Fujimoto, Hiroto; Hayashi, Tamio

    2013-06-18

    Asymmetric addition of arylboronates to aryl-substituted cyclic ketimines proceeded in the presence of a rhodium catalyst coordinated with a chiral diene ligand to give high yields of sulfamidates and sulfamides with high enantioselectivity (up to 99% ee).

  1. Mechanism and Selectivity in Nickel-Catalyzed Cross-Electrophile Coupling of Aryl Halides with Alkyl Halides

    OpenAIRE

    Biswas, Soumik; Weix, Daniel J.

    2013-01-01

    The direct cross-coupling of two different electrophiles, such as an aryl halide with an alkyl halide, offers many advantages over conventional cross-coupling methods that require a carbon nucleophile. Despite its promise as a versatile synthetic strategy, a limited understanding of the mechanism and origin of cross selectivity has hindered progress in reaction development and design. Herein, we shed light on the mechanism for the nickel-catalyzed cross-electrophile coupling of aryl halides w...

  2. Palladium-Catalyzed Hydroxylation of Aryl and Heteroaryl Halides Enabled by the Use of a Palladacycle Precatalyst

    OpenAIRE

    Cheung, Chi Wai; Buchwald, Stephen L.

    2014-01-01

    A method for the hydroxylation of aryl and heteroaryl halides, promoted by a catalyst based on a biarylphosphine ligand tBuBrettPhos (L5) and its corresponding palladium precatalyst (1), is described. The reactions allow the cross-coupling of both potassium and cesium hydroxides with (hetero)aryl halides to afford a variety of phenols and hydroxylated heteroarenes in high to excellent yield.

  3. A New Biocatalyst for Production of Optically Pure Aryl Epoxides by Styrene Monooxygenase from Pseudomonas fluorescens ST

    OpenAIRE

    Di Gennaro, Patrizia; Colmegna, Andrea; Galli, Enrica; Sello, Guido; Pelizzoni, Francesca; Bestetti, Giuseppina

    1999-01-01

    We developed a biocatalyst by cloning the styrene monooxygenase genes (styA and styB) from Pseudomonas fluorescens ST responsible for the oxidation of styrene to its corresponding epoxide. Recombinant Escherichia coli was able to oxidize different aryl vinyl and aryl ethenyl compounds to their corresponding optically pure epoxides. The results of bioconversions indicate the broad substrate preference of styrene monooxygenase and its potential for the production of several fine chemicals.

  4. Nickel-Catalyzed Dimerization and Alkylarylation of 1,3-Dienes with Alkyl Fluorides and Aryl Grignard Reagents.

    Science.gov (United States)

    Iwasaki, Takanori; Min, Xin; Fukuoka, Asuka; Kuniyasu, Hitoshi; Kambe, Nobuaki

    2016-04-25

    In the presence of a nickel catalyst, 1,3-butadiene undergoes selective dimerization and alkylarylation with alkyl fluorides and aryl Grignard reagents to give 1,6-octadienes with alkyl and aryl groups at the 3- and 8-positions, respectively, by the consecutive formation of three carbon-carbon bonds. The formation of an anionic nickel complex plays an important role in forming C-C bonds with alkyl fluorides. PMID:26938137

  5. Catalytic Enantioselective Aryl Transfer to Aldehydes Using Chiral 2,2’-Bispyrrolidine-Based Salan Ligands

    Directory of Open Access Journals (Sweden)

    Yixiang Cheng

    2011-04-01

    Full Text Available Chiral C2-symmetric diamines have emerged as versatile auxiliaries or ligands in numerous asymmetric transformations. Chiral 2,2’-bispyrrolidine-based salan ligands were prepared and applied to the asymmetric aryl transfer to aldehydes with arylboronic acids as the source of transferable aryl groups. The corresponding diarylmethanols were obtained in high yields with moderate to good enantioselectivitives of up to 83% ee.

  6. A New Biocatalyst for Production of Optically Pure Aryl Epoxides by Styrene Monooxygenase from Pseudomonas fluorescens ST

    Science.gov (United States)

    Di Gennaro, Patrizia; Colmegna, Andrea; Galli, Enrica; Sello, Guido; Pelizzoni, Francesca; Bestetti, Giuseppina

    1999-01-01

    We developed a biocatalyst by cloning the styrene monooxygenase genes (styA and styB) from Pseudomonas fluorescens ST responsible for the oxidation of styrene to its corresponding epoxide. Recombinant Escherichia coli was able to oxidize different aryl vinyl and aryl ethenyl compounds to their corresponding optically pure epoxides. The results of bioconversions indicate the broad substrate preference of styrene monooxygenase and its potential for the production of several fine chemicals. PMID:10347083

  7. Developing a framework of service convenience in health care: An exploratory study for a primary care provider.

    Science.gov (United States)

    Tuzovic, Sven; Kuppelwieser, Volker

    2016-01-01

    From retail health clinics and online appointment scheduling to (mobile) kiosks that enable patient check-in and automate the collection of copays and open balances, convenience has become an important topic in the health care sector over the last few years. While service convenience has also gained much interest in academia, one common limitation is that authors have adopted a "goods-centered" perspective focusing primarily on retail settings. Results of this exploratory study reveal that health care service convenience encompasses seven different dimensions: decision, access, scheduling, registration and check-in, transaction, care delivery, and postconsultation convenience. Implications and future research suggestions are discussed. PMID:27215644

  8. The Convenient Setting for Denjoy--Carleman Differentiable Mappings of Beurling and Roumieu Type

    CERN Document Server

    Kriegl, Andreas; Rainer, Armin

    2011-01-01

    We prove in a uniform way that all Denjoy--Carleman differentiable function classes of Beurling type $C^{(M)}$ and of Roumieu type $C^{\\{M\\}}$, admit a convenient setting if the weight sequence $M=(M_k)$ is log-convex and of moderate growth: For $\\mathcal C$ denoting either $C^{(M)}$ or $C^{\\{M\\}}$, the category of $\\mathcal C$-mappings is cartesian closed in the sense that $\\mathcal C(E,\\mathcal C(F,G))\\cong \\mathcal C(E\\x F, G)$ for convenient vector spaces. Applications to manifolds of mappings are given: The group of $\\mathcal C$-diffeomorphisms is a regular $\\mathcal C$-Lie group if $\\mathcal C \\supseteq C^\\om$, but not better.

  9. Activation of Aryl Halides by Nickel(I) Pincer Complexes: Reaction Pathways of Stoichiometric and Catalytic Dehalogenations.

    Science.gov (United States)

    Rettenmeier, Christoph A; Wenz, Jan; Wadepohl, Hubert; Gade, Lutz H

    2016-08-15

    Homolytic C-X bond cleavage of organohalides by the T-shaped nickel(I) complexes [LigNi(I)] 1 bearing the iso-PyrrMeBox ligand had been found previously to be the crucial activation step in the asymmetric hydrodehalogenation of geminal dihalides. Here, this mechanistic investigation is extended to aryl halides, which allowed a systematic study of the activation process by a combination of experimental data and density functional theory modeling. While the activation of both aryl chlorides and geminal dichlorides appears to proceed via an analogous transition state, the generation of a highly stabile nickel(II)aryl species in the reaction of the aryl chlorides for the former represents a major difference in the reactive behavior. This difference was found to have a crucial impact on the activity of these nickel pincer systems as catalysts in the dehalogenation of aryl chlorides compared to geminal dichlorides and highlights the importance of the regulatory pathways controlling the nickel(I) concentration throughout the catalysis. These results along with the identification and characterization of novel nickel(II)aryl species are presented. PMID:27483018

  10. Rh(I)-Catalyzed Arylation of Heterocycles via C-H Bond Activation: Expanded Scope Through Mechanistic Insight

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Jared; Berman, Ashley; Bergman, Robert; Ellman, Jonathan

    2007-07-18

    A practical, functional group tolerant method for the Rh-catalyzed direct arylation of a variety of pharmaceutically important azoles with aryl bromides is described. Many of the successful azole and aryl bromide coupling partners are not compatible with methods for the direct arylation of heterocycles using Pd(0) or Cu(I) catalysts. The readily prepared, low molecular weight ligand, Z-1-tert-butyl-2,3,6,7-tetrahydrophosphepine, which coordinates to Rh in a bidentate P-olefin fashion to provide a highly active yet thermally stable arylation catalyst, is essential to the success of this method. By using the tetrafluoroborate salt of the corresponding phosphonium, the reactions can be assembled outside of a glove box without purification of reagents or solvent. The reactions are also conducted in THF or dioxane, which greatly simplifies product isolation relative to most other methods for direct arylation of azoles employing high-boiling amide solvents. The reactions are performed with heating in a microwave reactor to obtain excellent product yields in two hours.

  11. The Statistical Relationship between Product Life Cycle and Repeat Purchase Behavior in Convenience Stores

    Science.gov (United States)

    Mizuno, T.; Takayasu, M.

    The density function of product life cycles in convenience stores is found to follow the Weibull distribution. To clarify the parameters that determine these life cycles, we introduce the conditional market share---defined as the probability that a product is selected by customers only if it had been previously purchased---and the market share without any conditions. The product life cycle is more strongly correlated with the conditional market share of the product than with the latter type of market share.

  12. A Convenient Method of Decomposing the Gini Index by Population Subgroups

    Directory of Open Access Journals (Sweden)

    Ogwang Tomson

    2014-03-01

    Full Text Available We propose a convenient method of estimating the within-group, between-group, and interaction components of the overall traditional Gini index from the estimated parameters of underlying “trick regression models” involving known forms of heteroscedasticity related to income. Two illustrative examples involving both real and artificial data are provided. The issue of appropriate standard error of the subgroup decomposition is also discussed.

  13. A Convenient Method for Asymmetric Reduction of Acetophenone using Lithium Hydroxide

    OpenAIRE

    NISHIKORI, Hisashi; Mizuno, Tomofumi; 錦織, 寿

    2010-01-01

    Optically active lithium-alkoxide catalyzes asymmetric reduction of ketones and imines with alkoxyhydrosilane as a Lewis base. Lithium salt is generally formed by a mixture of optically active alcohol and n-butyllithium as a metal source, which is too sensitive to moisture to handle in air. However, if n-butyllithium is replaced by another lithium source which is stable in air, a more convenient reaction system results. In this study, we examined the enantioselective reduction of acetophenone...

  14. A Concise and Convenient Synthesis of Stilbenes via Benzils and Arylmethyldiphenylphosphine Oxides

    Institute of Scientific and Technical Information of China (English)

    SUN Xun; ZHU Jun; ZHONG Chen; IZUMI Ken-Ji; ZHANG Chen

    2007-01-01

    A new and convenient synthetic method has been developed for the construction of stilbenes bearing electron-withdrawing group(s) by using benzils and arylmethyldiphenylphosphine oxides via sequences involving Wittig-Horner reaction and a rearrangement in the presence of t-BuOK in toluene under mild conditions.This approach could be readily applied to a facile synthesis of biologically important natural products,resveratrol and its derivatives,such as trimethoxystilbenes 1 (Z) and 2 (E).

  15. Critical evaluation of occupational health and safety management in Sasol retail convenience centres / Celestine Ibojiemenmen

    OpenAIRE

    Ibojiemenmen, Celestine

    2007-01-01

    Occupational health and safety management has continued to take the centre stage in the decision making process in most organisations. This is further fostered by agitation from labour unions and government intervention through legislation to promote safer work environment. This dissertation therefore presents some of the constraints and inadequacies of occupational health and safety management of Sasol Retail Convenience centres (Sasol RCCs), some of which are: • insuffi...

  16. Gender, trauma type, and PTSD prevalence: a re-analysis of 18 nordic convenience samples

    OpenAIRE

    Ditlevsen Daniel N; Elklit Ask

    2012-01-01

    Abstract Background The aim of the study was to examine a possible trauma type related variance in the gender difference of posttraumatic stress disorder (PTSD) prevalence. Methods An analysis was conducted on 18 convenience sample studies including data from a total of 5220 participants. The studies all applied the Harvard Trauma Questionnaire – part IV to assess PTSD. Cohen’s d was used to measure variance in gender differences. Trauma types included disasters and accidents, violence, loss,...

  17. Attitudes towards mobile payment : An empirical study of the consumers’ perception of security, privacy and convenience

    OpenAIRE

    Lindbäck, Karin; Blommé, Carl

    2011-01-01

    Mobile payment is a new payment method that is being introduced on the Swedish market, but has not yet come to its breakthrough. This thesis investigates the attitude the Swedish consumer has towards mobile payment. Based on previous surveys and theory, three main attributes, security, privacy and convenience, were chosen to represent the attitude of the consumer towards mobile payment. In order to analyze the data obtained from the surveys conducted, the multi-attribute attitude model was us...

  18. Towards a biochemical and structural characterisation of the sodium-iodide sym-porter (Nis)

    International Nuclear Information System (INIS)

    Iodide is essential for thyroid hormone biosynthesis in mammals, and therefore for the control of cell metabolism and the development of the central nervous system in the foetus and newborns, but is relatively scarce element in the environment. To ensure its accumulation, the thyroid gland has evolved a remarkably efficient system, the sodium-iodide sym-porter (NIS), that was first characterized at the molecular level 10 years ago (1). NIS is an intrinsic protein mainly located in the basolateral membrane of thyroid follicular cells where it actively transports iodide ions using the sodium gradient as a driving force (2,3). In addition, this transporter has been found in lactating mammary gland, stomach, and salivary glands, and its mRNA was detected in brain, ovaries, testis. To date, the physiological role of NIS in these organs is not yet identified (3,4).The capacity of NIS to mediate the accumulation of radioactive iodide has been exploited for many years in the diagnosis of thyroid cancer as well as for the detection and radiotherapy of derived metastases. Moreover, the presence of NIS in some breast tumours and the possibility to express it by targeted gene therapy in tumour cells where it is not naturally present could also widen its medical application (4-7). In case of accidental contamination, NIS would also be responsible for accumulation of radioisotopes in the thyroid and for their transfer to the milk and the newborn, eventually causing thyroid cancers. This has motivated our research program in the perspective of designing novel specific therapeutics. During the last decade, the gene encoding the thyroid NIS has been identified and sequenced in various species including rat, mouse and human (1, 8). It was also demonstrated that the protein expression and activity are highly regulated both at the transcriptional and post-translational levels (3). A preliminary topological mode could be drawn from the protein sequence. It proposes a general

  19. Iodide Sorption to Clays and the Relationship to the Surface Charge Environment

    Science.gov (United States)

    Miller, A. W.; Wang, Y.

    2011-12-01

    In performance assessments of nuclear waste repositories, iodine-129 is often the major contributor to dose at time scales ≥10,000 years. The breakthrough behavior of iodine is determined by the monovalent, anionic nature and the assumed lack of surface reactivity of the iodide ion. This assumption is corroborated by batch sorption data where iodide sorption to clays is typically very small, and only measurable under specific conditions. This result is consistent with charge repulsion arguments due to the fixed negative charge of clays repelling the anionic iodide. However, in compacted column diffusion experiments, iodide is routinely retarded relative to tritium, and is described with Kd values from ≈0.001-2.9ml/g. While small, these values can dramatically change the dose profile in performance assessment calculations. We hypothesize that contributions from the basal plane and edge charge of individual clay particles as well as the physical morphology of the clay particles are contributing to the conflicting behavior. In a series of experiments involving a wide range of clay minerals from the clay bank repository, both surface charge and iodide sorption were examined using surface titrations and batch sorption experiments. The clay minerals studied include: kaolinite, ripidolite, illite, montmorillonite, palygorskite, sepiolite, and an illite/smectite mixed layer clay. Each of these clays was characterized using XRD, and surface titrations in 0.01, 0.1, and 0.5 M NaCl electrolyte. The titrations spanned the pH range from 2.5-10.5 and were automated using an autotitrator. For reference, similar titrations were performed on pure forms of an Al-O powder. The titration curves were interpreted using an inversion method to attain the pKa distribution for each clay and metal oxide at each ionic strength. The pKa distribution for the Al-O shows two distinct peaks at 4.8 and 7.5, which are invariant with ionic strength. The pKa distribution of clays was highly

  20. Nickel levels in convenience and fast foods: In vitro study of the dialyzable fraction

    Energy Technology Data Exchange (ETDEWEB)

    Cabrera-Vique, Carmen, E-mail: carmenc@ugr.es [Department of Nutrition and Bromatology, University of Granada, Granada (Spain); Mesias, Marta [Department of Nutrition and Bromatology, University of Granada, Granada (Spain); Bouzas, Paula R. [Department of Statistic, University of Granada, Granada (Spain)

    2011-03-15

    Nickel presence was determined in 170 samples of 43 different convenience and fast foods widely consumed in Spain. Electrothermal atomic absorption spectrometry was used as analytical technique. Reliability of the procedure was checked. Ni levels ranged from 18.50 to 95.00 ng g{sup -1} (fresh weight of edible portion). The most elevated Ni concentrations were found in egg- and pork-based foods and in sauces but there is a high variability inside of each one of these foods. Ni content increases in products that contain spices and aromatic herbs, whole cereals, dry fruits, cheese and mushrooms. Mean Ni dialyzable fraction estimated by in vitro assays ranged from 4.50 to 7.75%. This study shows that the probability of exposure to health risks from these foods is overall small. However, the present findings are of potential use in food composition tables and to estimate the Ni dietary intake and tolerable intake levels in accordance with the current dietary habits. - Research highlights: {yields}Ni levels in convenience and fast food range from 18.50 to 95.00 ng/g. {yields}Ni content increases in products that contain spices and aromatic herbs, whole cereals, dry fruits, cheese and mushrooms. {yields}Mean Ni dialyzable fraction estimated by in vitro assays ranges from 4.50 to 7.75%. {yields}The probability of exposure to health risks from convenience and fast food is overall small.